With the patches to add vibration support for PMI632 finally applied,
let's enable this for the PMI632 PMIC and Fairphone 3 smartphone.
https://lore.kernel.org/linux-arm-msm/20240416-pm8xxx-vibrator-new-design-v11-0-7b1c951e1515@quicinc.com/
Patches have landed in the input tree:
https://git.kernel.org/pub/scm/linux/kernel/git/dtor/input.git/
Signed-off-by: Luca Weiss <[email protected]>
---
Luca Weiss (2):
arm64: dts: qcom: pmi632: Add vibrator
arm64: dts: qcom: sdm632-fairphone-fp3: Enable vibrator
arch/arm64/boot/dts/qcom/pmi632.dtsi | 6 ++++++
arch/arm64/boot/dts/qcom/sdm632-fairphone-fp3.dts | 4 ++++
2 files changed, 10 insertions(+)
---
base-commit: eecc5d90861b551d3b8fbd0d0e6f25c40496f3c0
change-id: 20240418-fp3-vibra-18c400889853
Best regards,
--
Luca Weiss <[email protected]>
Add a node for the vibrator module found inside the PMI632.
Signed-off-by: Luca Weiss <[email protected]>
---
arch/arm64/boot/dts/qcom/pmi632.dtsi | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/pmi632.dtsi b/arch/arm64/boot/dts/qcom/pmi632.dtsi
index 94d53b1cf6c8..b4313728f3e7 100644
--- a/arch/arm64/boot/dts/qcom/pmi632.dtsi
+++ b/arch/arm64/boot/dts/qcom/pmi632.dtsi
@@ -200,5 +200,11 @@ pmi632_lpg: pwm {
status = "disabled";
};
+
+ pmi632_vib: vibrator@5700 {
+ compatible = "qcom,pmi632-vib";
+ reg = <0x5700>;
+ status = "disabled";
+ };
};
};
--
2.44.0
Enable the vibrator on the PMI632 which is used on this phone.
Signed-off-by: Luca Weiss <[email protected]>
---
arch/arm64/boot/dts/qcom/sdm632-fairphone-fp3.dts | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sdm632-fairphone-fp3.dts b/arch/arm64/boot/dts/qcom/sdm632-fairphone-fp3.dts
index e2708c74e95a..2c1172aa97e4 100644
--- a/arch/arm64/boot/dts/qcom/sdm632-fairphone-fp3.dts
+++ b/arch/arm64/boot/dts/qcom/sdm632-fairphone-fp3.dts
@@ -143,6 +143,10 @@ &pmi632_vbus {
status = "okay";
};
+&pmi632_vib {
+ status = "okay";
+};
+
&sdhc_1 {
status = "okay";
vmmc-supply = <&pm8953_l8>;
--
2.44.0
On 18.04.2024 8:36 AM, Luca Weiss wrote:
> Add a node for the vibrator module found inside the PMI632.
>
> Signed-off-by: Luca Weiss <[email protected]>
> ---
Reviewed-by: Konrad Dybcio <[email protected]>
On a side note, this is a totally configuration-free peripheral that doesn't do
anything crazy until manually configured.
In the slow quest to be (hopefully) more sane about the defaults, should we keep
them enabled by default? Bjorn?
Konrad
On Thu Apr 18, 2024 at 12:01 PM CEST, Konrad Dybcio wrote:
> On 18.04.2024 8:36 AM, Luca Weiss wrote:
> > Add a node for the vibrator module found inside the PMI632.
> >
> > Signed-off-by: Luca Weiss <[email protected]>
> > ---
>
> Reviewed-by: Konrad Dybcio <[email protected]>
>
> On a side note, this is a totally configuration-free peripheral that doesn't do
> anything crazy until manually configured.
>
> In the slow quest to be (hopefully) more sane about the defaults, should we keep
> them enabled by default? Bjorn?
But many (most?) devices don't have a vibration motor connected to
PMI632, some (like devboards) don't have anything, and other phones have
a separate chip that controls the vibration motor.
Enabling this by default would mean all devices with PMI632 would get an
input device for the vibrator that probably doesn't work?
Regards
Luca
>
> Konrad
On 4/18/24 12:03, Luca Weiss wrote:
> On Thu Apr 18, 2024 at 12:01 PM CEST, Konrad Dybcio wrote:
>> On 18.04.2024 8:36 AM, Luca Weiss wrote:
>>> Add a node for the vibrator module found inside the PMI632.
>>>
>>> Signed-off-by: Luca Weiss <[email protected]>
>>> ---
>>
>> Reviewed-by: Konrad Dybcio <[email protected]>
>>
>> On a side note, this is a totally configuration-free peripheral that doesn't do
>> anything crazy until manually configured.
>>
>> In the slow quest to be (hopefully) more sane about the defaults, should we keep
>> them enabled by default? Bjorn?
>
> But many (most?) devices don't have a vibration motor connected to
> PMI632, some (like devboards) don't have anything, and other phones have
> a separate chip that controls the vibration motor.
>
> Enabling this by default would mean all devices with PMI632 would get an
> input device for the vibrator that probably doesn't work?
Fair
Konrad
On Thu, 18 Apr 2024 08:36:53 +0200, Luca Weiss wrote:
> With the patches to add vibration support for PMI632 finally applied,
> let's enable this for the PMI632 PMIC and Fairphone 3 smartphone.
>
> https://lore.kernel.org/linux-arm-msm/20240416-pm8xxx-vibrator-new-design-v11-0-7b1c951e1515@quicinc.com/
>
> Patches have landed in the input tree:
> https://git.kernel.org/pub/scm/linux/kernel/git/dtor/input.git/
>
> [...]
Applied, thanks!
[1/2] arm64: dts: qcom: pmi632: Add vibrator
commit: bbb1dd6402f9c67ea00bc6bf0e2a01d71db4c7fd
[2/2] arm64: dts: qcom: sdm632-fairphone-fp3: Enable vibrator
commit: ffaa4b5d5d07aed600d82929d8862263ce341a71
Best regards,
--
Bjorn Andersson <[email protected]>