From: Lakshmi Sowjanya D <[email protected]>
The goal of the PPS (Pulse Per Second) hardware/software is to generate a
signal from the system on a wire so that some third-party hardware can
observe that signal and judge how close the system's time is to another
system or piece of hardware.
Existing methods (like parallel ports) require software to flip a bit at
just the right time to create a PPS signal. Many things can prevent
software from doing this precisely. This (Timed I/O) method is better
because software only "arms" the hardware in advance and then depends on
the hardware to "fire" and flip the signal at just the right time.
To generate a PPS signal with this new hardware, the kernel wakes up
twice a second, once for 1->0 edge and other for the 0->1 edge. It does
this shortly (~10ms) before the actual change in the signal needs to be
made. It computes the TSC value at which edge will happen, convert to a
value hardware understands and program this value to Timed I/O hardware.
The actual edge transition happens without any further action from the
kernel.
The result here is a signal coming out of the system that is roughly
1,000 times more accurate than the old methods. If the system is heavily
loaded, the difference in accuracy is larger in old methods.
Application Interface:
The API to use Timed I/O is very simple. It is enabled and disabled by
writing a '1' or '0' value to the sysfs enable attribute associated with
the Timed I/O PPS device. Each Timed I/O pin is represented by a PPS
device. When enabled, a pulse-per-second (PPS) synchronized with the
system clock is continuously produced on the Timed I/O pin, otherwise it
is pulled low.
The Timed I/O signal on the motherboard is enabled in the BIOS setup.
Intel Advanced Menu -> PCH IO Configuration -> Timed I/O <Enable>
References:
https://en.wikipedia.org/wiki/Pulse-per-second_signal
https://drive.google.com/file/d/1vkBRRDuELmY8I3FlfOZaEBp-DxLW6t_V/view
https://youtu.be/JLUTT-lrDqw
Patch 1 adds the pps(pulse per second) generator tio driver to the pps
subsystem.
Patch 2 documentation and usage of the pps tio generator module.
Patch 3 includes documentation for sysfs interface.
These patches are based on the timers/core branch:
[1] https://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git/?h=timers/core
These changes are dependent on patches that are merged in [1].
Please help to review the changes.
Thanks in advance,
Sowjanya
Changes from v2:
- Split patch 1 to remove the functions in later stages.
- Include required headers in pps_gen_tio.
Changes from v3:
- Corrections in Documentation.
- Introducing non-RFC version of the patch series.
Changes from v4:
- Setting id in ice_ptp
- Modified conversion logic in convert_base_to_cs.
- Included the usage of the APIs in the commit message of 2nd patch.
Changes from v5:
- Change nsecs variable to use_nsecs.
- Change order of 1&2 patches and modify the commit message.
- Add sysfs abi file entry in MAINTAINERS file.
- Add check to find if any event is missed and disable hardware
accordingly.
Changes from v6:
- Split patch 1 into 1&2 patches.
- Add check for overflow in convert_ns_to_cs().
- Refine commit messages.
Changes from v7:
- Split the if condition and return error if current time exceeds
expire time.
- Update kernel version and month in ABI file.
Changes from v8:
- Add function to enable Timed I/O.
- Changed the updating of tio->enabled to a centralized place in
disable and enable functions.
Changes from v9:
- use tio->enabled instead of reading ctrl register.
- change error code in enable_store to -ENODEV.
Lakshmi Sowjanya D (3):
pps: generators: Add PPS Generator TIO Driver
Documentation: driver-api: pps: Add Intel Timed I/O PPS generator
ABI: pps: Add ABI documentation for Intel TIO
.../ABI/testing/sysfs-platform-pps-tio | 7 +
Documentation/driver-api/pps.rst | 24 ++
MAINTAINERS | 1 +
drivers/pps/generators/Kconfig | 16 ++
drivers/pps/generators/Makefile | 1 +
drivers/pps/generators/pps_gen_tio.c | 264 ++++++++++++++++++
6 files changed, 313 insertions(+)
create mode 100644 Documentation/ABI/testing/sysfs-platform-pps-tio
create mode 100644 drivers/pps/generators/pps_gen_tio.c
--
2.35.3
From: Lakshmi Sowjanya D <[email protected]>
The Intel Timed IO PPS generator driver outputs a PPS signal using
dedicated hardware that is more accurate than software actuated PPS.
The Timed IO hardware generates output events using the ART timer.
The ART timer period varies based on platform type, but is less than 100
nanoseconds for all current platforms. Timed IO output accuracy is
within 1 ART period.
PPS output is enabled by writing '1' the 'enable' sysfs attribute. The
driver uses hrtimers to schedule a wake-up 10 ms before each event
(edge) target time. At wakeup, the driver converts the target time in
terms of CLOCK_REALTIME to ART trigger time and writes this to the Timed
IO hardware. The Timed IO hardware generates an event precisely at the
requested system time without software involvement.
Co-developed-by: Christopher Hall <[email protected]>
Signed-off-by: Christopher Hall <[email protected]>
Co-developed-by: Pandith N <[email protected]>
Signed-off-by: Pandith N <[email protected]>
Co-developed-by: Thejesh Reddy T R <[email protected]>
Signed-off-by: Thejesh Reddy T R <[email protected]>
Signed-off-by: Lakshmi Sowjanya D <[email protected]>
Reviewed-by: Eddie Dong <[email protected]>
Reviewed-by: Andy Shevchenko <[email protected]>
Acked-by: Rodolfo Giometti <[email protected]>
---
drivers/pps/generators/Kconfig | 16 ++
drivers/pps/generators/Makefile | 1 +
drivers/pps/generators/pps_gen_tio.c | 264 +++++++++++++++++++++++++++
3 files changed, 281 insertions(+)
create mode 100644 drivers/pps/generators/pps_gen_tio.c
diff --git a/drivers/pps/generators/Kconfig b/drivers/pps/generators/Kconfig
index d615e640fcad..0f090932336f 100644
--- a/drivers/pps/generators/Kconfig
+++ b/drivers/pps/generators/Kconfig
@@ -12,3 +12,19 @@ config PPS_GENERATOR_PARPORT
If you say yes here you get support for a PPS signal generator which
utilizes STROBE pin of a parallel port to send PPS signals. It uses
parport abstraction layer and hrtimers to precisely control the signal.
+
+config PPS_GENERATOR_TIO
+ tristate "TIO PPS signal generator"
+ depends on X86 && CPU_SUP_INTEL
+ help
+ If you say yes here you get support for a PPS TIO signal generator
+ which generates a pulse at a prescribed time based on the system clock.
+ It uses time translation and hrtimers to precisely generate a pulse.
+ This hardware is present on 2019 and newer Intel CPUs. However, this
+ driver is not useful without adding highly specialized hardware outside
+ the Linux system to observe these pulses.
+
+ To compile this driver as a module, choose M here: the module
+ will be called pps_gen_tio.
+
+ If unsure, say N.
diff --git a/drivers/pps/generators/Makefile b/drivers/pps/generators/Makefile
index 2589fd0f2481..714e847ae193 100644
--- a/drivers/pps/generators/Makefile
+++ b/drivers/pps/generators/Makefile
@@ -4,5 +4,6 @@
#
obj-$(CONFIG_PPS_GENERATOR_PARPORT) += pps_gen_parport.o
+obj-$(CONFIG_PPS_GENERATOR_TIO) += pps_gen_tio.o
ccflags-$(CONFIG_PPS_DEBUG) := -DDEBUG
diff --git a/drivers/pps/generators/pps_gen_tio.c b/drivers/pps/generators/pps_gen_tio.c
new file mode 100644
index 000000000000..c4142aa8f356
--- /dev/null
+++ b/drivers/pps/generators/pps_gen_tio.c
@@ -0,0 +1,264 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Intel PPS signal Generator Driver
+ *
+ * Copyright (C) 2024 Intel Corporation
+ */
+
+#include <linux/bits.h>
+#include <linux/bitfield.h>
+#include <linux/cleanup.h>
+#include <linux/container_of.h>
+#include <linux/cpu.h>
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/hrtimer.h>
+#include <linux/io-64-nonatomic-hi-lo.h>
+#include <linux/kstrtox.h>
+#include <linux/mod_devicetable.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/spinlock.h>
+#include <linux/sysfs.h>
+#include <linux/timekeeping.h>
+#include <linux/types.h>
+
+#include <asm/cpu_device_id.h>
+
+#define TIOCTL 0x00
+#define TIOCOMPV 0x10
+#define TIOEC 0x30
+
+/* Control Register */
+#define TIOCTL_EN BIT(0)
+#define TIOCTL_DIR BIT(1)
+#define TIOCTL_EP GENMASK(3, 2)
+#define TIOCTL_EP_RISING_EDGE FIELD_PREP(TIOCTL_EP, 0)
+#define TIOCTL_EP_FALLING_EDGE FIELD_PREP(TIOCTL_EP, 1)
+#define TIOCTL_EP_TOGGLE_EDGE FIELD_PREP(TIOCTL_EP, 2)
+
+#define SAFE_TIME_NS (10 * NSEC_PER_MSEC) /* Safety time to set hrtimer early */
+#define MAGIC_CONST (NSEC_PER_SEC - SAFE_TIME_NS)
+#define ART_HW_DELAY_CYCLES 2
+
+struct pps_tio {
+ struct hrtimer timer;
+ struct device *dev;
+ spinlock_t lock;
+ struct attribute_group attrs;
+ void __iomem *base;
+ bool enabled;
+ u32 prev_count;
+};
+
+static inline u32 pps_tio_read(struct pps_tio *tio, u32 offset)
+{
+ return readl(tio->base + offset);
+}
+
+static inline void pps_ctl_write(struct pps_tio *tio, u32 value)
+{
+ writel(value, tio->base + TIOCTL);
+}
+
+/* For COMPV register, It's safer to write higher 32-bit followed by lower 32-bit */
+static inline void pps_compv_write(struct pps_tio *tio, u64 value)
+{
+ hi_lo_writeq(value, tio->base + TIOCOMPV);
+}
+
+static inline ktime_t first_event(struct pps_tio *tio)
+{
+ return ktime_set(ktime_get_real_seconds() + 1, MAGIC_CONST);
+}
+
+static u32 pps_tio_disable(struct pps_tio *tio)
+{
+ u32 ctrl;
+
+ ctrl = pps_tio_read(tio, TIOCTL);
+ pps_compv_write(tio, 0);
+
+ ctrl &= ~TIOCTL_EN;
+ pps_ctl_write(tio, ctrl);
+ tio->enabled = false;
+ tio->prev_count = 0;
+
+ return ctrl;
+}
+
+static void pps_tio_enable(struct pps_tio *tio)
+{
+ u32 ctrl;
+
+ ctrl = pps_tio_read(tio, TIOCTL);
+ ctrl |= TIOCTL_EN;
+ pps_ctl_write(tio, ctrl);
+ tio->enabled = true;
+}
+
+static void pps_tio_direction_output(struct pps_tio *tio)
+{
+ u32 ctrl;
+
+ ctrl = pps_tio_disable(tio);
+
+ /* We enable the device, be sure that the 'compare' value is invalid */
+ pps_compv_write(tio, 0);
+
+ ctrl &= ~(TIOCTL_DIR | TIOCTL_EP);
+ ctrl |= TIOCTL_EP_TOGGLE_EDGE;
+ pps_ctl_write(tio, ctrl);
+ pps_tio_enable(tio);
+}
+
+static bool pps_generate_next_pulse(struct pps_tio *tio, ktime_t expires)
+{
+ u64 art;
+
+ if (!ktime_real_to_base_clock(expires, CSID_X86_ART, &art)) {
+ pps_tio_disable(tio);
+ return false;
+ }
+
+ pps_compv_write(tio, art - ART_HW_DELAY_CYCLES);
+ return true;
+}
+
+static enum hrtimer_restart hrtimer_callback(struct hrtimer *timer)
+{
+ struct pps_tio *tio = container_of(timer, struct pps_tio, timer);
+ ktime_t expires, now;
+ u32 event_count;
+
+ guard(spinlock)(&tio->lock);
+
+ /* Check if any event is missed. If an event is missed, TIO will be disabled*/
+ event_count = pps_tio_read(tio, TIOEC);
+ if (tio->prev_count && tio->prev_count == event_count)
+ goto err;
+ tio->prev_count = event_count;
+ expires = hrtimer_get_expires(timer);
+ now = ktime_get_real();
+
+ if (now - expires >= SAFE_TIME_NS)
+ goto err;
+
+ tio->enabled = pps_generate_next_pulse(tio, expires + SAFE_TIME_NS);
+ if (!tio->enabled)
+ return HRTIMER_NORESTART;
+
+ hrtimer_forward(timer, now, NSEC_PER_SEC / 2);
+ return HRTIMER_RESTART;
+err:
+ dev_err(tio->dev, "Event missed, Disabling Timed I/O");
+ pps_tio_disable(tio);
+ return HRTIMER_NORESTART;
+}
+
+static ssize_t enable_store(struct device *dev, struct device_attribute *attr, const char *buf,
+ size_t count)
+{
+ struct pps_tio *tio = dev_get_drvdata(dev);
+ bool enable;
+ int err;
+
+ if (!timekeeping_clocksource_has_base(CSID_X86_ART)) {
+ dev_err_once(dev, "PPS cannot be used as clock is not related to ART");
+ return -ENODEV;
+ }
+
+ err = kstrtobool(buf, &enable);
+ if (err)
+ return err;
+
+ guard(spinlock_irqsave)(&tio->lock);
+ if (enable && !tio->enabled) {
+ pps_tio_direction_output(tio);
+ hrtimer_start(&tio->timer, first_event(tio), HRTIMER_MODE_ABS);
+ } else if (!enable && tio->enabled) {
+ hrtimer_cancel(&tio->timer);
+ pps_tio_disable(tio);
+ }
+ return count;
+}
+
+static ssize_t enable_show(struct device *dev, struct device_attribute *devattr, char *buf)
+{
+ struct pps_tio *tio = dev_get_drvdata(dev);
+
+ return sysfs_emit(buf, "%u\n", tio->enabled);
+}
+static DEVICE_ATTR_RW(enable);
+
+static struct attribute *pps_tio_attrs[] = {
+ &dev_attr_enable.attr,
+ NULL
+};
+ATTRIBUTE_GROUPS(pps_tio);
+
+static int pps_gen_tio_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct pps_tio *tio;
+
+ if (!(cpu_feature_enabled(X86_FEATURE_TSC_KNOWN_FREQ) &&
+ cpu_feature_enabled(X86_FEATURE_ART))) {
+ dev_warn(dev, "TSC/ART is not enabled");
+ return -ENODEV;
+ }
+
+ tio = devm_kzalloc(dev, sizeof(*tio), GFP_KERNEL);
+ if (!tio)
+ return -ENOMEM;
+
+ tio->dev = dev;
+ tio->base = devm_platform_ioremap_resource(pdev, 0);
+ if (IS_ERR(tio->base))
+ return PTR_ERR(tio->base);
+
+ pps_tio_disable(tio);
+ hrtimer_init(&tio->timer, CLOCK_REALTIME, HRTIMER_MODE_ABS);
+ tio->timer.function = hrtimer_callback;
+ spin_lock_init(&tio->lock);
+ platform_set_drvdata(pdev, tio);
+
+ return 0;
+}
+
+static int pps_gen_tio_remove(struct platform_device *pdev)
+{
+ struct pps_tio *tio = platform_get_drvdata(pdev);
+
+ hrtimer_cancel(&tio->timer);
+ pps_tio_disable(tio);
+
+ return 0;
+}
+
+static const struct acpi_device_id intel_pmc_tio_acpi_match[] = {
+ { "INTC1021" },
+ { "INTC1022" },
+ { "INTC1023" },
+ { "INTC1024" },
+ {}
+};
+MODULE_DEVICE_TABLE(acpi, intel_pmc_tio_acpi_match);
+
+static struct platform_driver pps_gen_tio_driver = {
+ .probe = pps_gen_tio_probe,
+ .remove = pps_gen_tio_remove,
+ .driver = {
+ .name = "intel-pps-gen-tio",
+ .acpi_match_table = intel_pmc_tio_acpi_match,
+ .dev_groups = pps_tio_groups,
+ },
+};
+module_platform_driver(pps_gen_tio_driver);
+
+MODULE_AUTHOR("Lakshmi Sowjanya D <[email protected]>");
+MODULE_AUTHOR("Christopher Hall <[email protected]>");
+MODULE_AUTHOR("Pandith N <[email protected]>");
+MODULE_AUTHOR("Thejesh Reddy T R <[email protected]>");
+MODULE_DESCRIPTION("Intel PMC Time-Aware IO Generator Driver");
+MODULE_LICENSE("GPL");
--
2.35.3
From: Lakshmi Sowjanya D <[email protected]>
Add Intel Timed I/O PPS usage instructions.
Co-developed-by: Pandith N <[email protected]>
Signed-off-by: Pandith N <[email protected]>
Signed-off-by: Lakshmi Sowjanya D <[email protected]>
Reviewed-by: Andy Shevchenko <[email protected]>
Acked-by: Rodolfo Giometti <[email protected]>
---
Documentation/driver-api/pps.rst | 24 ++++++++++++++++++++++++
1 file changed, 24 insertions(+)
diff --git a/Documentation/driver-api/pps.rst b/Documentation/driver-api/pps.rst
index 78dded03e5d8..75f7b094f963 100644
--- a/Documentation/driver-api/pps.rst
+++ b/Documentation/driver-api/pps.rst
@@ -246,3 +246,27 @@ delay between assert and clear edge as small as possible to reduce system
latencies. But if it is too small slave won't be able to capture clear edge
transition. The default of 30us should be good enough in most situations.
The delay can be selected using 'delay' pps_gen_parport module parameter.
+
+
+Intel Timed I/O PPS signal generator
+------------------------------------
+
+Intel Timed I/O is a high precision device, present on 2019 and newer Intel
+CPUs, that can generate PPS signals.
+
+Timed I/O and system time are both driven by same hardware clock. The signal
+is generated with a precision of ~20 nanoseconds. The generated PPS signal
+is used to synchronize an external device with system clock. For example,
+it can be used to share your clock with a device that receives PPS signal,
+generated by Timed I/O device. There are dedicated Timed I/O pins to deliver
+the PPS signal to an external device.
+
+Usage of Intel Timed I/O as PPS generator:
+
+Start generating PPS signal::
+
+ $echo 1 > /sys/devices/platform/INTCxxxx\:00/enable
+
+Stop generating PPS signal::
+
+ $echo 0 > /sys/devices/platform/INTCxxxx\:00/enable
--
2.35.3
From: Lakshmi Sowjanya D <[email protected]>
Document sysfs interface for Intel Timed I/O PPS driver.
Signed-off-by: Lakshmi Sowjanya D <[email protected]>
---
Documentation/ABI/testing/sysfs-platform-pps-tio | 7 +++++++
MAINTAINERS | 1 +
2 files changed, 8 insertions(+)
create mode 100644 Documentation/ABI/testing/sysfs-platform-pps-tio
diff --git a/Documentation/ABI/testing/sysfs-platform-pps-tio b/Documentation/ABI/testing/sysfs-platform-pps-tio
new file mode 100644
index 000000000000..e461cea12d60
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-platform-pps-tio
@@ -0,0 +1,7 @@
+What: /sys/devices/platform/INTCxxxx/enable
+Date: September 2024
+KernelVersion: 6.11
+Contact: Lakshmi Sowjanya D <[email protected]>
+Description:
+ (RW) Enable or disable PPS TIO generator output, read to
+ see the status of hardware (Enabled/Disabled).
diff --git a/MAINTAINERS b/MAINTAINERS
index aacccb376c28..9c623f167aa9 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -17946,6 +17946,7 @@ M: Rodolfo Giometti <[email protected]>
L: [email protected] (subscribers-only)
S: Maintained
W: http://wiki.enneenne.com/index.php/LinuxPPS_support
+F: Documentation/ABI/testing/sysfs-platform-pps-tio
F: Documentation/ABI/testing/sysfs-pps
F: Documentation/devicetree/bindings/pps/pps-gpio.yaml
F: Documentation/driver-api/pps.rst
--
2.35.3
Hi--
On 6/11/24 8:53 PM, [email protected] wrote:
> From: Lakshmi Sowjanya D <[email protected]>
>
> Document sysfs interface for Intel Timed I/O PPS driver.
>
> Signed-off-by: Lakshmi Sowjanya D <[email protected]>
> ---
> Documentation/ABI/testing/sysfs-platform-pps-tio | 7 +++++++
> MAINTAINERS | 1 +
> 2 files changed, 8 insertions(+)
> create mode 100644 Documentation/ABI/testing/sysfs-platform-pps-tio
>
> diff --git a/Documentation/ABI/testing/sysfs-platform-pps-tio b/Documentation/ABI/testing/sysfs-platform-pps-tio
> new file mode 100644
> index 000000000000..e461cea12d60
> --- /dev/null
> +++ b/Documentation/ABI/testing/sysfs-platform-pps-tio
> @@ -0,0 +1,7 @@
> +What: /sys/devices/platform/INTCxxxx/enable
> +Date: September 2024
> +KernelVersion: 6.11
> +Contact: Lakshmi Sowjanya D <[email protected]>
> +Description:
> + (RW) Enable or disable PPS TIO generator output, read to
> + see the status of hardware (Enabled/Disabled).
> diff --git a/MAINTAINERS b/MAINTAINERS
> index aacccb376c28..9c623f167aa9 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -17946,6 +17946,7 @@ M: Rodolfo Giometti <[email protected]>
> L: [email protected] (subscribers-only)
> S: Maintained
> W: http://wiki.enneenne.com/index.php/LinuxPPS_support
I can't connect to (load) that web page above (wiki...).
Is it correct? Does it work for other people?
> +F: Documentation/ABI/testing/sysfs-platform-pps-tio
> F: Documentation/ABI/testing/sysfs-pps
> F: Documentation/devicetree/bindings/pps/pps-gpio.yaml
> F: Documentation/driver-api/pps.rst
--
~Randy
On 12/06/24 06:29, Randy Dunlap wrote:
> Hi--
>
> On 6/11/24 8:53 PM, [email protected] wrote:
>> From: Lakshmi Sowjanya D <[email protected]>
>>
>> Document sysfs interface for Intel Timed I/O PPS driver.
>>
>> Signed-off-by: Lakshmi Sowjanya D <[email protected]>
>> ---
>> Documentation/ABI/testing/sysfs-platform-pps-tio | 7 +++++++
>> MAINTAINERS | 1 +
>> 2 files changed, 8 insertions(+)
>> create mode 100644 Documentation/ABI/testing/sysfs-platform-pps-tio
>>
>> diff --git a/Documentation/ABI/testing/sysfs-platform-pps-tio b/Documentation/ABI/testing/sysfs-platform-pps-tio
>> new file mode 100644
>> index 000000000000..e461cea12d60
>> --- /dev/null
>> +++ b/Documentation/ABI/testing/sysfs-platform-pps-tio
>> @@ -0,0 +1,7 @@
>> +What: /sys/devices/platform/INTCxxxx/enable
>> +Date: September 2024
>> +KernelVersion: 6.11
>> +Contact: Lakshmi Sowjanya D <[email protected]>
>> +Description:
>> + (RW) Enable or disable PPS TIO generator output, read to
>> + see the status of hardware (Enabled/Disabled).
>> diff --git a/MAINTAINERS b/MAINTAINERS
>> index aacccb376c28..9c623f167aa9 100644
>> --- a/MAINTAINERS
>> +++ b/MAINTAINERS
>> @@ -17946,6 +17946,7 @@ M: Rodolfo Giometti <[email protected]>
>> L: [email protected] (subscribers-only)
>> S: Maintained
>> W: http://wiki.enneenne.com/index.php/LinuxPPS_support
>
> I can't connect to (load) that web page above (wiki...).
> Is it correct? Does it work for other people?
The LinuxPPS wiki is at http://linuxpps.org
>> +F: Documentation/ABI/testing/sysfs-platform-pps-tio
>> F: Documentation/ABI/testing/sysfs-pps
>> F: Documentation/devicetree/bindings/pps/pps-gpio.yaml
>> F: Documentation/driver-api/pps.rst
>
Ciao,
Rodolfo
--
GNU/Linux Solutions e-mail: [email protected]
Linux Device Driver [email protected]
Embedded Systems phone: +39 349 2432127
UNIX programming
On Wed, Jun 12, 2024 at 09:23:58AM +0530, [email protected] wrote:
> From: Lakshmi Sowjanya D <[email protected]>
>
> Add Intel Timed I/O PPS usage instructions.
>
> Co-developed-by: Pandith N <[email protected]>
> Signed-off-by: Pandith N <[email protected]>
> Signed-off-by: Lakshmi Sowjanya D <[email protected]>
> Reviewed-by: Andy Shevchenko <[email protected]>
> Acked-by: Rodolfo Giometti <[email protected]>
> ---
> Documentation/driver-api/pps.rst | 24 ++++++++++++++++++++++++
> 1 file changed, 24 insertions(+)
>
> diff --git a/Documentation/driver-api/pps.rst b/Documentation/driver-api/pps.rst
> index 78dded03e5d8..75f7b094f963 100644
> --- a/Documentation/driver-api/pps.rst
> +++ b/Documentation/driver-api/pps.rst
> @@ -246,3 +246,27 @@ delay between assert and clear edge as small as possible to reduce system
> latencies. But if it is too small slave won't be able to capture clear edge
> transition. The default of 30us should be good enough in most situations.
> The delay can be selected using 'delay' pps_gen_parport module parameter.
> +
> +
> +Intel Timed I/O PPS signal generator
> +------------------------------------
> +
> +Intel Timed I/O is a high precision device, present on 2019 and newer Intel
> +CPUs, that can generate PPS signals.
> +
> +Timed I/O and system time are both driven by same hardware clock. The signal
> +is generated with a precision of ~20 nanoseconds. The generated PPS signal
> +is used to synchronize an external device with system clock. For example,
> +it can be used to share your clock with a device that receives PPS signal,
> +generated by Timed I/O device. There are dedicated Timed I/O pins to deliver
> +the PPS signal to an external device.
> +
> +Usage of Intel Timed I/O as PPS generator:
> +
> +Start generating PPS signal::
> +
> + $echo 1 > /sys/devices/platform/INTCxxxx\:00/enable
> +
> +Stop generating PPS signal::
> +
> + $echo 0 > /sys/devices/platform/INTCxxxx\:00/enable
Why is this not described in Documenation/ABI/ ?
thanks,
greg k-h
On Wed, Jun 12, 2024 at 10:02:46AM +0200, Greg KH wrote:
> On Wed, Jun 12, 2024 at 09:23:58AM +0530, [email protected] wrote:
> > From: Lakshmi Sowjanya D <[email protected]>
> >
> > Add Intel Timed I/O PPS usage instructions.
> >
> > Co-developed-by: Pandith N <[email protected]>
> > Signed-off-by: Pandith N <[email protected]>
> > Signed-off-by: Lakshmi Sowjanya D <[email protected]>
> > Reviewed-by: Andy Shevchenko <[email protected]>
> > Acked-by: Rodolfo Giometti <[email protected]>
> > ---
> > Documentation/driver-api/pps.rst | 24 ++++++++++++++++++++++++
> > 1 file changed, 24 insertions(+)
> >
> > diff --git a/Documentation/driver-api/pps.rst b/Documentation/driver-api/pps.rst
> > index 78dded03e5d8..75f7b094f963 100644
> > --- a/Documentation/driver-api/pps.rst
> > +++ b/Documentation/driver-api/pps.rst
> > @@ -246,3 +246,27 @@ delay between assert and clear edge as small as possible to reduce system
> > latencies. But if it is too small slave won't be able to capture clear edge
> > transition. The default of 30us should be good enough in most situations.
> > The delay can be selected using 'delay' pps_gen_parport module parameter.
> > +
> > +
> > +Intel Timed I/O PPS signal generator
> > +------------------------------------
> > +
> > +Intel Timed I/O is a high precision device, present on 2019 and newer Intel
> > +CPUs, that can generate PPS signals.
> > +
> > +Timed I/O and system time are both driven by same hardware clock. The signal
> > +is generated with a precision of ~20 nanoseconds. The generated PPS signal
> > +is used to synchronize an external device with system clock. For example,
> > +it can be used to share your clock with a device that receives PPS signal,
> > +generated by Timed I/O device. There are dedicated Timed I/O pins to deliver
> > +the PPS signal to an external device.
> > +
> > +Usage of Intel Timed I/O as PPS generator:
> > +
> > +Start generating PPS signal::
> > +
> > + $echo 1 > /sys/devices/platform/INTCxxxx\:00/enable
> > +
> > +Stop generating PPS signal::
> > +
> > + $echo 0 > /sys/devices/platform/INTCxxxx\:00/enable
>
> Why is this not described in Documenation/ABI/ ?
Oops, that was patch 3/3, sorry.
On 6/11/24 11:57 PM, Rodolfo Giometti wrote:
> On 12/06/24 06:29, Randy Dunlap wrote:
>> Hi--
>>
>> On 6/11/24 8:53 PM, [email protected] wrote:
>>> From: Lakshmi Sowjanya D <[email protected]>
>>>
>>> Document sysfs interface for Intel Timed I/O PPS driver.
>>>
>>> Signed-off-by: Lakshmi Sowjanya D <[email protected]>
>>> ---
>>> Documentation/ABI/testing/sysfs-platform-pps-tio | 7 +++++++
>>> MAINTAINERS | 1 +
>>> 2 files changed, 8 insertions(+)
>>> create mode 100644 Documentation/ABI/testing/sysfs-platform-pps-tio
>>>
>>> diff --git a/Documentation/ABI/testing/sysfs-platform-pps-tio b/Documentation/ABI/testing/sysfs-platform-pps-tio
>>> new file mode 100644
>>> index 000000000000..e461cea12d60
>>> --- /dev/null
>>> +++ b/Documentation/ABI/testing/sysfs-platform-pps-tio
>>> @@ -0,0 +1,7 @@
>>> +What: /sys/devices/platform/INTCxxxx/enable
>>> +Date: September 2024
>>> +KernelVersion: 6.11
>>> +Contact: Lakshmi Sowjanya D <[email protected]>
>>> +Description:
>>> + (RW) Enable or disable PPS TIO generator output, read to
>>> + see the status of hardware (Enabled/Disabled).
>>> diff --git a/MAINTAINERS b/MAINTAINERS
>>> index aacccb376c28..9c623f167aa9 100644
>>> --- a/MAINTAINERS
>>> +++ b/MAINTAINERS
>>> @@ -17946,6 +17946,7 @@ M: Rodolfo Giometti <[email protected]>
>>> L: [email protected] (subscribers-only)
Is the mailing list correct?
The linuxpps.org FAQ says that the Linux PPS mail list is [email protected].
>>> S: Maintained
>>> W: http://wiki.enneenne.com/index.php/LinuxPPS_support
>>
>> I can't connect to (load) that web page above (wiki...).
>> Is it correct? Does it work for other people?
>
> The LinuxPPS wiki is at http://linuxpps.org
Great. Please have someone update the MAINTAINERS file.
Thanks.
>>> +F: Documentation/ABI/testing/sysfs-platform-pps-tio
>>> F: Documentation/ABI/testing/sysfs-pps
>>> F: Documentation/devicetree/bindings/pps/pps-gpio.yaml
>>> F: Documentation/driver-api/pps.rst
>>
>
> Ciao,
>
> Rodolfo
>
--
~Randy