LinuxLists.cc - [PATCH] i2c: ocores: add missing unwind goto in `ocores_i2c

[permalink] [raw]

Subject: Re: [PATCH] i2c: ocores: add missing unwind goto in `ocores_i2c_probe`

On Sun, Apr 16, 2023 at 03:20:40PM +0800, Wang Zhang wrote:
> platform_get_irq_optional is a function used to obtain an IRQ
> number for a device on a platform. The function returns the IRQ number
> associated with the specified device, or a negative error code if it fails.
>
> The error handling code after the err_clk label should be executed to
> release any resources that were allocated for the clock if a negative
> error code returned.
>
> Fix this by assigning irq to ret and changing the direct return to err_clk.

The clock is got in ocores_i2c_of_probe(). That function is not always
called. So you need to be careful in the error handling that you are
not disabling a clock which does not exist....

But i think a better fix is to change ocores_i2c_of_probe() to use
devm_clk_get_enabled(), rather than devm_clk_get() so that the driver
core will disable to clock if the probe fails, or when the driver is
unloaded.

Andrew

2023-04-17 14:14:05

[permalink] [raw]

Subject: [PATCH v2] i2c: ocores: use devm_ managed clks

Smatch Warns:
drivers/i2c/busses/i2c-ocores.c:701 ocores_i2c_probe() warn:
missing unwind goto?

If any wrong occurs in ocores_i2c_of_probe, the i2c->clk needs to be
released. But the function returns directly in line 701 without freeing
the clock. Even though we can fix it by freeing the clock manually if
platform_get_irq_optional fails, it may not be following the best practice.
The original code for this driver contains if (IS_ERR()) checks
throughout, explicitly allowing the driver to continue loading even if
devm_clk_get() fails.

While it is not entirely clear why the original author implemented this
behavior, there may have been certain circumstances or issues that were not
apparent to us. It's possible that they were trying to work around a bug by
employing an unconventional solution.Using `devm_clk_get_enabled()` rather
than devm_clk_get() can automatically track the usage of clocks and free
them when they are no longer needed or an error occurs.

fixing it by changing `ocores_i2c_of_probe` to use `devm_clk_get_enabled()`
rather than `devm_clk_get()`, changing `goto err_clk' to direct return and
removing `err_clk`.

Signed-off-by: Wang Zhang <[email protected]>
---
v1->v2: change `ocores_i2c_of_probe` to use `devm_clk_get_enabled()`
drivers/i2c/busses/i2c-ocores.c | 62 +++++++++++++--------------------
1 file changed, 24 insertions(+), 38 deletions(-)

diff --git a/drivers/i2c/busses/i2c-ocores.c b/drivers/i2c/busses/i2c-ocores.c
index a0af027db04c..1dcb1af1ad13 100644
--- a/drivers/i2c/busses/i2c-ocores.c
+++ b/drivers/i2c/busses/i2c-ocores.c
@@ -549,28 +549,24 @@ static int ocores_i2c_of_probe(struct platform_device *pdev,
&clock_frequency);
i2c->bus_clock_khz = 100;

- i2c->clk = devm_clk_get(&pdev->dev, NULL);
+ i2c->clk = devm_clk_get_enabled(&pdev->dev, NULL);

- if (!IS_ERR(i2c->clk)) {
- int ret = clk_prepare_enable(i2c->clk);
-
- if (ret) {
- dev_err(&pdev->dev,
- "clk_prepare_enable failed: %d\n", ret);
- return ret;
- }
- i2c->ip_clock_khz = clk_get_rate(i2c->clk) / 1000;
- if (clock_frequency_present)
- i2c->bus_clock_khz = clock_frequency / 1000;
+ if (IS_ERR(i2c->clk)) {
+ dev_err(&pdev->dev,
+ "devm_clk_get_enabled failed\n");
+ return PTR_ERR(i2c->clk);
}

+ i2c->ip_clock_khz = clk_get_rate(i2c->clk) / 1000;
+ if (clock_frequency_present)
+ i2c->bus_clock_khz = clock_frequency / 1000;
+
if (i2c->ip_clock_khz == 0) {
if (of_property_read_u32(np, "opencores,ip-clock-frequency",
&val)) {
if (!clock_frequency_present) {
dev_err(&pdev->dev,
"Missing required parameter 'opencores,ip-clock-frequency'\n");
- clk_disable_unprepare(i2c->clk);
return -ENODEV;
}
i2c->ip_clock_khz = clock_frequency / 1000;
@@ -675,8 +671,7 @@ static int ocores_i2c_probe(struct platform_device *pdev)
default:
dev_err(&pdev->dev, "Unsupported I/O width (%d)\n",
i2c->reg_io_width);
- ret = -EINVAL;
- goto err_clk;
+ return -EINVAL;
}
}

@@ -707,13 +702,13 @@ static int ocores_i2c_probe(struct platform_device *pdev)
pdev->name, i2c);
if (ret) {
dev_err(&pdev->dev, "Cannot claim IRQ\n");
- goto err_clk;
+ return ret;
}
}

ret = ocores_init(&pdev->dev, i2c);
if (ret)
- goto err_clk;
+ return ret;

/* hook up driver to tree */
platform_set_drvdata(pdev, i2c);
@@ -725,7 +720,7 @@ static int ocores_i2c_probe(struct platform_device *pdev)
/* add i2c adapter to i2c tree */
ret = i2c_add_adapter(&i2c->adap);
if (ret)
- goto err_clk;
+ return ret;

/* add in known devices to the bus */
if (pdata) {
@@ -734,10 +729,6 @@ static int ocores_i2c_probe(struct platform_device *pdev)
}

return 0;
-
-err_clk:
- clk_disable_unprepare(i2c->clk);
- return ret;
}

static int ocores_i2c_remove(struct platform_device *pdev)
@@ -752,9 +743,6 @@ static int ocores_i2c_remove(struct platform_device *pdev)
/* remove adapter & data */
i2c_del_adapter(&i2c->adap);

- if (!IS_ERR(i2c->clk))
- clk_disable_unprepare(i2c->clk);
-
return 0;
}

@@ -768,8 +756,7 @@ static int ocores_i2c_suspend(struct device *dev)
ctrl &= ~(OCI2C_CTRL_EN | OCI2C_CTRL_IEN);
oc_setreg(i2c, OCI2C_CONTROL, ctrl);

- if (!IS_ERR(i2c->clk))
- clk_disable_unprepare(i2c->clk);
+ clk_disable_unprepare(i2c->clk);
return 0;
}

@@ -777,19 +764,18 @@ static int ocores_i2c_resume(struct device *dev)
{
struct ocores_i2c *i2c = dev_get_drvdata(dev);

- if (!IS_ERR(i2c->clk)) {
- unsigned long rate;
- int ret = clk_prepare_enable(i2c->clk);
+ unsigned long rate;
+ int ret = clk_prepare_enable(i2c->clk);

- if (ret) {
- dev_err(dev,
- "clk_prepare_enable failed: %d\n", ret);
- return ret;
- }
- rate = clk_get_rate(i2c->clk) / 1000;
- if (rate)
- i2c->ip_clock_khz = rate;
+ if (ret) {
+ dev_err(dev,
+ "clk_prepare_enable failed: %d\n", ret);
+ return ret;
}
+ rate = clk_get_rate(i2c->clk) / 1000;
+ if (rate)
+ i2c->ip_clock_khz = rate;
+
return ocores_init(dev, i2c);
}

--
2.34.1

2023-04-17 14:24:21

[permalink] [raw]

Subject: [PATCH v2] i2c: ocores: use devm_ managed clks

Smatch Warns:
drivers/i2c/busses/i2c-ocores.c:701 ocores_i2c_probe() warn:
missing unwind goto?

If any wrong occurs in ocores_i2c_of_probe, the i2c->clk needs to be
released. But the function returns directly in line 701 without freeing
the clock. Even though we can fix it by freeing the clock manually if
platform_get_irq_optional fails, it may not be following the best practice.
The original code for this driver contains if (IS_ERR()) checks
throughout, explicitly allowing the driver to continue loading even if
devm_clk_get() fails.

While it is not entirely clear why the original author implemented this
behavior, there may have been certain circumstances or issues that were not
apparent to us. It's possible that they were trying to work around a bug by
employing an unconventional solution.Using `devm_clk_get_enabled()` rather
than devm_clk_get() can automatically track the usage of clocks and free
them when they are no longer needed or an error occurs.

fixing it by changing `ocores_i2c_of_probe` to use `devm_clk_get_enabled()`
rather than `devm_clk_get()`, changing `goto err_clk' to direct return and
removing `err_clk`.

Signed-off-by: Wang Zhang <[email protected]>
---
v1->v2: change `ocores_i2c_of_probe` to use `devm_clk_get_enabled()`

drivers/i2c/busses/i2c-ocores.c | 62 +++++++++++++--------------------
1 file changed, 24 insertions(+), 38 deletions(-)

diff --git a/drivers/i2c/busses/i2c-ocores.c b/drivers/i2c/busses/i2c-ocores.c
index a0af027db04c..1dcb1af1ad13 100644
--- a/drivers/i2c/busses/i2c-ocores.c
+++ b/drivers/i2c/busses/i2c-ocores.c
@@ -549,28 +549,24 @@ static int ocores_i2c_of_probe(struct platform_device *pdev,
&clock_frequency);
i2c->bus_clock_khz = 100;

- i2c->clk = devm_clk_get(&pdev->dev, NULL);
+ i2c->clk = devm_clk_get_enabled(&pdev->dev, NULL);

- if (!IS_ERR(i2c->clk)) {
- int ret = clk_prepare_enable(i2c->clk);
-
- if (ret) {
- dev_err(&pdev->dev,
- "clk_prepare_enable failed: %d\n", ret);
- return ret;
- }
- i2c->ip_clock_khz = clk_get_rate(i2c->clk) / 1000;
- if (clock_frequency_present)
- i2c->bus_clock_khz = clock_frequency / 1000;
+ if (IS_ERR(i2c->clk)) {
+ dev_err(&pdev->dev,
+ "devm_clk_get_enabled failed\n");
+ return PTR_ERR(i2c->clk);
}

+ i2c->ip_clock_khz = clk_get_rate(i2c->clk) / 1000;
+ if (clock_frequency_present)
+ i2c->bus_clock_khz = clock_frequency / 1000;
+
if (i2c->ip_clock_khz == 0) {
if (of_property_read_u32(np, "opencores,ip-clock-frequency",
&val)) {
if (!clock_frequency_present) {
dev_err(&pdev->dev,
"Missing required parameter 'opencores,ip-clock-frequency'\n");
- clk_disable_unprepare(i2c->clk);
return -ENODEV;
}
i2c->ip_clock_khz = clock_frequency / 1000;
@@ -675,8 +671,7 @@ static int ocores_i2c_probe(struct platform_device *pdev)
default:
dev_err(&pdev->dev, "Unsupported I/O width (%d)\n",
i2c->reg_io_width);
- ret = -EINVAL;
- goto err_clk;
+ return -EINVAL;
}
}

@@ -707,13 +702,13 @@ static int ocores_i2c_probe(struct platform_device *pdev)
pdev->name, i2c);
if (ret) {
dev_err(&pdev->dev, "Cannot claim IRQ\n");
- goto err_clk;
+ return ret;
}
}

ret = ocores_init(&pdev->dev, i2c);
if (ret)
- goto err_clk;
+ return ret;

/* hook up driver to tree */
platform_set_drvdata(pdev, i2c);
@@ -725,7 +720,7 @@ static int ocores_i2c_probe(struct platform_device *pdev)
/* add i2c adapter to i2c tree */
ret = i2c_add_adapter(&i2c->adap);
if (ret)
- goto err_clk;
+ return ret;

/* add in known devices to the bus */
if (pdata) {
@@ -734,10 +729,6 @@ static int ocores_i2c_probe(struct platform_device *pdev)
}

return 0;
-
-err_clk:
- clk_disable_unprepare(i2c->clk);
- return ret;
}

static int ocores_i2c_remove(struct platform_device *pdev)
@@ -752,9 +743,6 @@ static int ocores_i2c_remove(struct platform_device *pdev)
/* remove adapter & data */
i2c_del_adapter(&i2c->adap);

- if (!IS_ERR(i2c->clk))
- clk_disable_unprepare(i2c->clk);
-
return 0;
}

@@ -768,8 +756,7 @@ static int ocores_i2c_suspend(struct device *dev)
ctrl &= ~(OCI2C_CTRL_EN | OCI2C_CTRL_IEN);
oc_setreg(i2c, OCI2C_CONTROL, ctrl);

- if (!IS_ERR(i2c->clk))
- clk_disable_unprepare(i2c->clk);
+ clk_disable_unprepare(i2c->clk);
return 0;
}

@@ -777,19 +764,18 @@ static int ocores_i2c_resume(struct device *dev)
{
struct ocores_i2c *i2c = dev_get_drvdata(dev);

- if (!IS_ERR(i2c->clk)) {
- unsigned long rate;
- int ret = clk_prepare_enable(i2c->clk);
+ unsigned long rate;
+ int ret = clk_prepare_enable(i2c->clk);

- if (ret) {
- dev_err(dev,
- "clk_prepare_enable failed: %d\n", ret);
- return ret;
- }
- rate = clk_get_rate(i2c->clk) / 1000;
- if (rate)
- i2c->ip_clock_khz = rate;
+ if (ret) {
+ dev_err(dev,
+ "clk_prepare_enable failed: %d\n", ret);
+ return ret;
}
+ rate = clk_get_rate(i2c->clk) / 1000;
+ if (rate)
+ i2c->ip_clock_khz = rate;
+
return ocores_init(dev, i2c);
}

--
2.34.1

2023-04-17 14:37:48

by Peter Rosin

[permalink] [raw]

Subject: Re: [PATCH v2] i2c: ocores: use devm_ managed clks

2023-04-17 at 16:05, Wang Zhang wrote:
> Smatch Warns:
> drivers/i2c/busses/i2c-ocores.c:701 ocores_i2c_probe() warn:
> missing unwind goto?
>
> If any wrong occurs in ocores_i2c_of_probe, the i2c->clk needs to be
> released. But the function returns directly in line 701 without freeing
> the clock. Even though we can fix it by freeing the clock manually if
> platform_get_irq_optional fails, it may not be following the best practice.
> The original code for this driver contains if (IS_ERR()) checks
> throughout, explicitly allowing the driver to continue loading even if
> devm_clk_get() fails.
>
> While it is not entirely clear why the original author implemented this
> behavior, there may have been certain circumstances or issues that were not
> apparent to us. It's possible that they were trying to work around a bug by
> employing an unconventional solution.Using `devm_clk_get_enabled()` rather
> than devm_clk_get() can automatically track the usage of clocks and free
> them when they are no longer needed or an error occurs.
>
> fixing it by changing `ocores_i2c_of_probe` to use `devm_clk_get_enabled()`
> rather than `devm_clk_get()`, changing `goto err_clk' to direct return and
> removing `err_clk`.
>
> Signed-off-by: Wang Zhang <[email protected]>
> ---
> v1->v2: change `ocores_i2c_of_probe` to use `devm_clk_get_enabled()`
>
> drivers/i2c/busses/i2c-ocores.c | 62 +++++++++++++--------------------
> 1 file changed, 24 insertions(+), 38 deletions(-)
>
> diff --git a/drivers/i2c/busses/i2c-ocores.c b/drivers/i2c/busses/i2c-ocores.c
> index a0af027db04c..1dcb1af1ad13 100644
> --- a/drivers/i2c/busses/i2c-ocores.c
> +++ b/drivers/i2c/busses/i2c-ocores.c
> @@ -549,28 +549,24 @@ static int ocores_i2c_of_probe(struct platform_device *pdev,
> &clock_frequency);
> i2c->bus_clock_khz = 100;
>
> - i2c->clk = devm_clk_get(&pdev->dev, NULL);
> + i2c->clk = devm_clk_get_enabled(&pdev->dev, NULL);
>
> - if (!IS_ERR(i2c->clk)) {
> - int ret = clk_prepare_enable(i2c->clk);
> -
> - if (ret) {
> - dev_err(&pdev->dev,
> - "clk_prepare_enable failed: %d\n", ret);
> - return ret;
> - }
> - i2c->ip_clock_khz = clk_get_rate(i2c->clk) / 1000;
> - if (clock_frequency_present)
> - i2c->bus_clock_khz = clock_frequency / 1000;
> + if (IS_ERR(i2c->clk)) {
> + dev_err(&pdev->dev,
> + "devm_clk_get_enabled failed\n");
> + return PTR_ERR(i2c->clk);
> }
>
> + i2c->ip_clock_khz = clk_get_rate(i2c->clk) / 1000;
> + if (clock_frequency_present)
> + i2c->bus_clock_khz = clock_frequency / 1000;
> +
> if (i2c->ip_clock_khz == 0) {

This branch seems hard to hit with this patch.

Cheers,
Peter

> if (of_property_read_u32(np, "opencores,ip-clock-frequency",
> &val)) {
> if (!clock_frequency_present) {
> dev_err(&pdev->dev,
> "Missing required parameter 'opencores,ip-clock-frequency'\n");
> - clk_disable_unprepare(i2c->clk);
> return -ENODEV;
> }
> i2c->ip_clock_khz = clock_frequency / 1000;
> @@ -675,8 +671,7 @@ static int ocores_i2c_probe(struct platform_device *pdev)
> default:
> dev_err(&pdev->dev, "Unsupported I/O width (%d)\n",
> i2c->reg_io_width);
> - ret = -EINVAL;
> - goto err_clk;
> + return -EINVAL;
> }
> }
>
> @@ -707,13 +702,13 @@ static int ocores_i2c_probe(struct platform_device *pdev)
> pdev->name, i2c);
> if (ret) {
> dev_err(&pdev->dev, "Cannot claim IRQ\n");
> - goto err_clk;
> + return ret;
> }
> }
>
> ret = ocores_init(&pdev->dev, i2c);
> if (ret)
> - goto err_clk;
> + return ret;
>
> /* hook up driver to tree */
> platform_set_drvdata(pdev, i2c);
> @@ -725,7 +720,7 @@ static int ocores_i2c_probe(struct platform_device *pdev)
> /* add i2c adapter to i2c tree */
> ret = i2c_add_adapter(&i2c->adap);
> if (ret)
> - goto err_clk;
> + return ret;
>
> /* add in known devices to the bus */
> if (pdata) {
> @@ -734,10 +729,6 @@ static int ocores_i2c_probe(struct platform_device *pdev)
> }
>
> return 0;
> -
> -err_clk:
> - clk_disable_unprepare(i2c->clk);
> - return ret;
> }
>
> static int ocores_i2c_remove(struct platform_device *pdev)
> @@ -752,9 +743,6 @@ static int ocores_i2c_remove(struct platform_device *pdev)
> /* remove adapter & data */
> i2c_del_adapter(&i2c->adap);
>
> - if (!IS_ERR(i2c->clk))
> - clk_disable_unprepare(i2c->clk);
> -
> return 0;
> }
>
> @@ -768,8 +756,7 @@ static int ocores_i2c_suspend(struct device *dev)
> ctrl &= ~(OCI2C_CTRL_EN | OCI2C_CTRL_IEN);
> oc_setreg(i2c, OCI2C_CONTROL, ctrl);
>
> - if (!IS_ERR(i2c->clk))
> - clk_disable_unprepare(i2c->clk);
> + clk_disable_unprepare(i2c->clk);
> return 0;
> }
>
> @@ -777,19 +764,18 @@ static int ocores_i2c_resume(struct device *dev)
> {
> struct ocores_i2c *i2c = dev_get_drvdata(dev);
>
> - if (!IS_ERR(i2c->clk)) {
> - unsigned long rate;
> - int ret = clk_prepare_enable(i2c->clk);
> + unsigned long rate;
> + int ret = clk_prepare_enable(i2c->clk);
>
> - if (ret) {
> - dev_err(dev,
> - "clk_prepare_enable failed: %d\n", ret);
> - return ret;
> - }
> - rate = clk_get_rate(i2c->clk) / 1000;
> - if (rate)
> - i2c->ip_clock_khz = rate;
> + if (ret) {
> + dev_err(dev,
> + "clk_prepare_enable failed: %d\n", ret);
> + return ret;
> }
> + rate = clk_get_rate(i2c->clk) / 1000;
> + if (rate)
> + i2c->ip_clock_khz = rate;
> +
> return ocores_init(dev, i2c);
> }
>

2023-04-17 15:52:24

[permalink] [raw]

Subject: Re: [PATCH v2] i2c: ocores: use devm_ managed clks

> drivers/i2c/busses/i2c-ocores.c | 62 +++++++++++++--------------------
> 1 file changed, 24 insertions(+), 38 deletions(-)
>
> diff --git a/drivers/i2c/busses/i2c-ocores.c b/drivers/i2c/busses/i2c-ocores.c
> index a0af027db04c..1dcb1af1ad13 100644
> --- a/drivers/i2c/busses/i2c-ocores.c
> +++ b/drivers/i2c/busses/i2c-ocores.c
> @@ -549,28 +549,24 @@ static int ocores_i2c_of_probe(struct platform_device *pdev,
> &clock_frequency);
> i2c->bus_clock_khz = 100;
>
> - i2c->clk = devm_clk_get(&pdev->dev, NULL);
> + i2c->clk = devm_clk_get_enabled(&pdev->dev, NULL);
>
> - if (!IS_ERR(i2c->clk)) {
> - int ret = clk_prepare_enable(i2c->clk);
> -
> - if (ret) {
> - dev_err(&pdev->dev,
> - "clk_prepare_enable failed: %d\n", ret);
> - return ret;
> - }
> - i2c->ip_clock_khz = clk_get_rate(i2c->clk) / 1000;
> - if (clock_frequency_present)
> - i2c->bus_clock_khz = clock_frequency / 1000;
> + if (IS_ERR(i2c->clk)) {
> + dev_err(&pdev->dev,
> + "devm_clk_get_enabled failed\n");
> + return PTR_ERR(i2c->clk);

I think this is wrong. The old code would not return an error if
devm_clk_get() failed, e.g because the clock does not exist in
DT. i2c->bus_clock_khz would default to 100, and it keeps going. Now,
it appears you have turned the missing clock into a fatal error.

devm_clk_get_optional_enabled() seems to do what you want.

Andrew

2023-04-22 13:24:09

[permalink] [raw]

Subject: [PATCH v3] i2c: ocores: use devm_ managed clks

If any wrong occurs in ocores_i2c_of_probe, the i2c->clk needs to be
released. But the function returns directly in line 701 without freeing
the clock. Even though we can fix it by freeing the clock manually if
platform_get_irq_optional fails, it may not be following the best practice.
The original code for this driver contains if (IS_ERR()) checks
throughout, explicitly allowing the driver to continue loading even if
devm_clk_get() fails.

While it is not entirely clear why the original author implemented this
behavior, there may have been certain circumstances or issues that were not
apparent to us. It's possible that they were trying to work around a bug by
employing an unconventional solution.Using `devm_clk_get_enabled()` rather
than devm_clk_get() can automatically track the usage of clocks and free
them when they are no longer needed or an error occurs.

fixing it by changing `ocores_i2c_of_probe` to use
`devm_clk_get_optional_enabled()` rather than `devm_clk_get()`, changing
`goto err_clk' to direct return and removing `err_clk`.

Signed-off-by: Wang Zhang <[email protected]>
---
v2->v3: use `devm_clk_get_optional_enabled()` to manage clks
v1->v2: change `ocores_i2c_of_probe` to use `devm_clk_get_enabled()`
---
drivers/i2c/busses/i2c-ocores.c | 56 +++++++++++++--------------------
1 file changed, 22 insertions(+), 34 deletions(-)

diff --git a/drivers/i2c/busses/i2c-ocores.c b/drivers/i2c/busses/i2c-ocores.c
index 2e575856c5cd..0b225177fdd1 100644
--- a/drivers/i2c/busses/i2c-ocores.c
+++ b/drivers/i2c/busses/i2c-ocores.c
@@ -552,16 +552,15 @@ static int ocores_i2c_of_probe(struct platform_device *pdev,
&clock_frequency);
i2c->bus_clock_khz = 100;

- i2c->clk = devm_clk_get(&pdev->dev, NULL);
+ i2c->clk = devm_clk_get_optional_enabled(&pdev->dev, NULL);

- if (!IS_ERR(i2c->clk)) {
- int ret = clk_prepare_enable(i2c->clk);
+ if (IS_ERR(i2c->clk)) {
+ dev_err(&pdev->dev,
+ "devm_clk_get_optional_enabled failed\n");
+ return PTR_ERR(i2c->clk);
+ }

- if (ret) {
- dev_err(&pdev->dev,
- "clk_prepare_enable failed: %d\n", ret);
- return ret;
- }
+ if (i2c->clk) {
i2c->ip_clock_khz = clk_get_rate(i2c->clk) / 1000;
if (clock_frequency_present)
i2c->bus_clock_khz = clock_frequency / 1000;
@@ -573,7 +572,6 @@ static int ocores_i2c_of_probe(struct platform_device *pdev,
if (!clock_frequency_present) {
dev_err(&pdev->dev,
"Missing required parameter 'opencores,ip-clock-frequency'\n");
- clk_disable_unprepare(i2c->clk);
return -ENODEV;
}
i2c->ip_clock_khz = clock_frequency / 1000;
@@ -678,8 +676,7 @@ static int ocores_i2c_probe(struct platform_device *pdev)
default:
dev_err(&pdev->dev, "Unsupported I/O width (%d)\n",
i2c->reg_io_width);
- ret = -EINVAL;
- goto err_clk;
+ return -EINVAL;
}
}

@@ -710,13 +707,13 @@ static int ocores_i2c_probe(struct platform_device *pdev)
pdev->name, i2c);
if (ret) {
dev_err(&pdev->dev, "Cannot claim IRQ\n");
- goto err_clk;
+ return ret;
}
}

ret = ocores_init(&pdev->dev, i2c);
if (ret)
- goto err_clk;
+ return ret;

/* hook up driver to tree */
platform_set_drvdata(pdev, i2c);
@@ -728,7 +725,7 @@ static int ocores_i2c_probe(struct platform_device *pdev)
/* add i2c adapter to i2c tree */
ret = i2c_add_adapter(&i2c->adap);
if (ret)
- goto err_clk;
+ return ret;

/* add in known devices to the bus */
if (pdata) {
@@ -737,10 +734,6 @@ static int ocores_i2c_probe(struct platform_device *pdev)
}

return 0;
-
-err_clk:
- clk_disable_unprepare(i2c->clk);
- return ret;
}

static int ocores_i2c_remove(struct platform_device *pdev)
@@ -755,9 +748,6 @@ static int ocores_i2c_remove(struct platform_device *pdev)
/* remove adapter & data */
i2c_del_adapter(&i2c->adap);

- if (!IS_ERR(i2c->clk))
- clk_disable_unprepare(i2c->clk);
-
return 0;
}

@@ -771,8 +761,7 @@ static int ocores_i2c_suspend(struct device *dev)
ctrl &= ~(OCI2C_CTRL_EN | OCI2C_CTRL_IEN);
oc_setreg(i2c, OCI2C_CONTROL, ctrl);

- if (!IS_ERR(i2c->clk))
- clk_disable_unprepare(i2c->clk);
+ clk_disable_unprepare(i2c->clk);
return 0;
}

@@ -780,19 +769,18 @@ static int ocores_i2c_resume(struct device *dev)
{
struct ocores_i2c *i2c = dev_get_drvdata(dev);

- if (!IS_ERR(i2c->clk)) {
- unsigned long rate;
- int ret = clk_prepare_enable(i2c->clk);
+ unsigned long rate;
+ int ret = clk_prepare_enable(i2c->clk);

- if (ret) {
- dev_err(dev,
- "clk_prepare_enable failed: %d\n", ret);
- return ret;
- }
- rate = clk_get_rate(i2c->clk) / 1000;
- if (rate)
- i2c->ip_clock_khz = rate;
+ if (ret) {
+ dev_err(dev,
+ "clk_prepare_enable failed: %d\n", ret);
+ return ret;
}
+ rate = clk_get_rate(i2c->clk) / 1000;
+ if (rate)
+ i2c->ip_clock_khz = rate;
+
return ocores_init(dev, i2c);
}

--
2.34.1

2023-04-25 10:03:01

by 张网

[permalink] [raw]

Subject: Re: [PATCH v3] i2c: ocores: use devm_ managed clks

ping?

"Wang Zhang" <[email protected]>写道：
> If any wrong occurs in ocores_i2c_of_probe, the i2c->clk needs to be
> released. But the function returns directly in line 701 without freeing
> the clock. Even though we can fix it by freeing the clock manually if
> platform_get_irq_optional fails, it may not be following the best practice.
> The original code for this driver contains if (IS_ERR()) checks
> throughout, explicitly allowing the driver to continue loading even if
> devm_clk_get() fails.
>
> While it is not entirely clear why the original author implemented this
> behavior, there may have been certain circumstances or issues that were not
> apparent to us. It's possible that they were trying to work around a bug by
> employing an unconventional solution.Using `devm_clk_get_enabled()` rather
> than devm_clk_get() can automatically track the usage of clocks and free
> them when they are no longer needed or an error occurs.
>
> fixing it by changing `ocores_i2c_of_probe` to use
> `devm_clk_get_optional_enabled()` rather than `devm_clk_get()`, changing
> `goto err_clk' to direct return and removing `err_clk`.
>
> Signed-off-by: Wang Zhang <[email protected]>
> ---
> v2->v3: use `devm_clk_get_optional_enabled()` to manage clks
> v1->v2: change `ocores_i2c_of_probe` to use `devm_clk_get_enabled()`
> ---
> drivers/i2c/busses/i2c-ocores.c | 56 +++++++++++++--------------------
> 1 file changed, 22 insertions(+), 34 deletions(-)
>
> diff --git a/drivers/i2c/busses/i2c-ocores.c b/drivers/i2c/busses/i2c-ocores.c
> index 2e575856c5cd..0b225177fdd1 100644
> --- a/drivers/i2c/busses/i2c-ocores.c
> +++ b/drivers/i2c/busses/i2c-ocores.c
> @@ -552,16 +552,15 @@ static int ocores_i2c_of_probe(struct platform_device *pdev,
> &clock_frequency);
> i2c->bus_clock_khz = 100;
>
> - i2c->clk = devm_clk_get(&pdev->dev, NULL);
> + i2c->clk = devm_clk_get_optional_enabled(&pdev->dev, NULL);
>
> - if (!IS_ERR(i2c->clk)) {
> - int ret = clk_prepare_enable(i2c->clk);
> + if (IS_ERR(i2c->clk)) {
> + dev_err(&pdev->dev,
> + "devm_clk_get_optional_enabled failed\n");
> + return PTR_ERR(i2c->clk);
> + }
>
> - if (ret) {
> - dev_err(&pdev->dev,
> - "clk_prepare_enable failed: %d\n", ret);
> - return ret;
> - }
> + if (i2c->clk) {
> i2c->ip_clock_khz = clk_get_rate(i2c->clk) / 1000;
> if (clock_frequency_present)
> i2c->bus_clock_khz = clock_frequency / 1000;
> @@ -573,7 +572,6 @@ static int ocores_i2c_of_probe(struct platform_device *pdev,
> if (!clock_frequency_present) {
> dev_err(&pdev->dev,
> "Missing required parameter 'opencores,ip-clock-frequency'\n");
> - clk_disable_unprepare(i2c->clk);
> return -ENODEV;
> }
> i2c->ip_clock_khz = clock_frequency / 1000;
> @@ -678,8 +676,7 @@ static int ocores_i2c_probe(struct platform_device *pdev)
> default:
> dev_err(&pdev->dev, "Unsupported I/O width (%d)\n",
> i2c->reg_io_width);
> - ret = -EINVAL;
> - goto err_clk;
> + return -EINVAL;
> }
> }
>
> @@ -710,13 +707,13 @@ static int ocores_i2c_probe(struct platform_device *pdev)
> pdev->name, i2c);
> if (ret) {
> dev_err(&pdev->dev, "Cannot claim IRQ\n");
> - goto err_clk;
> + return ret;
> }
> }
>
> ret = ocores_init(&pdev->dev, i2c);
> if (ret)
> - goto err_clk;
> + return ret;
>
> /* hook up driver to tree */
> platform_set_drvdata(pdev, i2c);
> @@ -728,7 +725,7 @@ static int ocores_i2c_probe(struct platform_device *pdev)
> /* add i2c adapter to i2c tree */
> ret = i2c_add_adapter(&i2c->adap);
> if (ret)
> - goto err_clk;
> + return ret;
>
> /* add in known devices to the bus */
> if (pdata) {
> @@ -737,10 +734,6 @@ static int ocores_i2c_probe(struct platform_device *pdev)
> }
>
> return 0;
> -
> -err_clk:
> - clk_disable_unprepare(i2c->clk);
> - return ret;
> }
>
> static int ocores_i2c_remove(struct platform_device *pdev)
> @@ -755,9 +748,6 @@ static int ocores_i2c_remove(struct platform_device *pdev)
> /* remove adapter & data */
> i2c_del_adapter(&i2c->adap);
>
> - if (!IS_ERR(i2c->clk))
> - clk_disable_unprepare(i2c->clk);
> -
> return 0;
> }
>
> @@ -771,8 +761,7 @@ static int ocores_i2c_suspend(struct device *dev)
> ctrl &= ~(OCI2C_CTRL_EN | OCI2C_CTRL_IEN);
> oc_setreg(i2c, OCI2C_CONTROL, ctrl);
>
> - if (!IS_ERR(i2c->clk))
> - clk_disable_unprepare(i2c->clk);
> + clk_disable_unprepare(i2c->clk);
> return 0;
> }
>
> @@ -780,19 +769,18 @@ static int ocores_i2c_resume(struct device *dev)
> {
> struct ocores_i2c *i2c = dev_get_drvdata(dev);
>
> - if (!IS_ERR(i2c->clk)) {
> - unsigned long rate;
> - int ret = clk_prepare_enable(i2c->clk);
> + unsigned long rate;
> + int ret = clk_prepare_enable(i2c->clk);
>
> - if (ret) {
> - dev_err(dev,
> - "clk_prepare_enable failed: %d\n", ret);
> - return ret;
> - }
> - rate = clk_get_rate(i2c->clk) / 1000;
> - if (rate)
> - i2c->ip_clock_khz = rate;
> + if (ret) {
> + dev_err(dev,
> + "clk_prepare_enable failed: %d\n", ret);
> + return ret;
> }
> + rate = clk_get_rate(i2c->clk) / 1000;
> + if (rate)
> + i2c->ip_clock_khz = rate;
> +
> return ocores_init(dev, i2c);
> }
>
> --
> 2.34.1

2023-04-25 12:02:58

[permalink] [raw]

Subject: Re: [PATCH v3] i2c: ocores: use devm_ managed clks

On Sat, Apr 22, 2023 at 08:32:53PM +0800, Wang Zhang wrote:
> If any wrong occurs in ocores_i2c_of_probe, the i2c->clk needs to be
> released. But the function returns directly in line 701 without freeing
> the clock. Even though we can fix it by freeing the clock manually if
> platform_get_irq_optional fails, it may not be following the best practice.
> The original code for this driver contains if (IS_ERR()) checks
> throughout, explicitly allowing the driver to continue loading even if
> devm_clk_get() fails.
>
> While it is not entirely clear why the original author implemented this
> behavior, there may have been certain circumstances or issues that were not
> apparent to us. It's possible that they were trying to work around a bug by
> employing an unconventional solution.Using `devm_clk_get_enabled()` rather
> than devm_clk_get() can automatically track the usage of clocks and free
> them when they are no longer needed or an error occurs.
>
> fixing it by changing `ocores_i2c_of_probe` to use
> `devm_clk_get_optional_enabled()` rather than `devm_clk_get()`, changing
> `goto err_clk' to direct return and removing `err_clk`.
>
> Signed-off-by: Wang Zhang <[email protected]>

Reviewed-by: Andrew Lunn <[email protected]>

Andrew

2023-04-25 14:52:34

by 张网

[permalink] [raw]

Subject: Re: Re: [PATCH v3] i2c: ocores: use devm_ managed clks

Hi Andrew,

I would like to express my sincere gratitude for taking the time and effort to review
my submitted patch. I understand that reviewing can be a time-consuming process
and I truly appreciate your dedication.

As we move forward, I would like to inquire about the first version[1] of the patch I submitted.
As clk_disable_unprepare() has checks for error pointer and NULL already, I think there is no
need to add the check. So both the first version of the patch and this one can work on this
branch.

If there are any further changes or revisions needed, please do not hesitate to let me know.
I am committed to learning and improving, and I welcome any feedback you may have.
Thank you again for your support and guidance throughout this process.

Best regards,
Wang Zhang
---
[1] http://patchwork.ozlabs.org/project/linux-i2c/patch/[email protected]/

"Andrew Lunn" <[email protected]>写道：
> On Sat, Apr 22, 2023 at 08:32:53PM +0800, Wang Zhang wrote:
> > If any wrong occurs in ocores_i2c_of_probe, the i2c->clk needs to be
> > released. But the function returns directly in line 701 without freeing
> > the clock. Even though we can fix it by freeing the clock manually if
> > platform_get_irq_optional fails, it may not be following the best practice.
> > The original code for this driver contains if (IS_ERR()) checks
> > throughout, explicitly allowing the driver to continue loading even if
> > devm_clk_get() fails.
> >
> > While it is not entirely clear why the original author implemented this
> > behavior, there may have been certain circumstances or issues that were not
> > apparent to us. It's possible that they were trying to work around a bug by
> > employing an unconventional solution.Using `devm_clk_get_enabled()` rather
> > than devm_clk_get() can automatically track the usage of clocks and free
> > them when they are no longer needed or an error occurs.
> >
> > fixing it by changing `ocores_i2c_of_probe` to use
> > `devm_clk_get_optional_enabled()` rather than `devm_clk_get()`, changing
> > `goto err_clk' to direct return and removing `err_clk`.
> >
> > Signed-off-by: Wang Zhang <[email protected]>
>
> Reviewed-by: Andrew Lunn <[email protected]>
>
> Andrew

2023-04-25 15:08:30

[permalink] [raw]

Subject: Re: Re: [PATCH v3] i2c: ocores: use devm_ managed clks

On Tue, Apr 25, 2023 at 10:47:29PM +0800, 张网 wrote:
> Hi Andrew,
>
> I would like to express my sincere gratitude for taking the time and effort to review
> my submitted patch. I understand that reviewing can be a time-consuming process
> and I truly appreciate your dedication.
>
> As we move forward, I would like to inquire about the first version[1] of the patch I submitted.
> As clk_disable_unprepare() has checks for error pointer and NULL already, I think there is no
> need to add the check. So both the first version of the patch and this one can work on this
> branch.
>
> If there are any further changes or revisions needed, please do not hesitate to let me know.
> I am committed to learning and improving, and I welcome any feedback you may have.
> Thank you again for your support and guidance throughout this process.
>
> Best regards,
> Wang Zhang
> ---
> [1] http://patchwork.ozlabs.org/project/linux-i2c/patch/[email protected]/

So this patch is about the IRQ being an error code, and doing the
correct cleanup.

With the change to devm_clk_get_ there is no need to disabled the
clock, it will be done automatically. This means there is no cleanup
the driver needs to do itself. So the patch is no longer needed.

Andrew

2023-05-23 05:35:41

by 张网

[permalink] [raw]

Subject: Re: Re: [PATCH v3] i2c: ocores: use devm_ managed clks

> -----原始邮件-----
> 发件人: "Andrew Lunn" <[email protected]>
> 发送时间: 2023-04-25 19:57:26 (星期二)
> 收件人: "Wang Zhang" <[email protected]>
> 抄送: "Peter Korsgaard" <[email protected]>, [email protected], [email protected], [email protected]
> 主题: Re: [PATCH v3] i2c: ocores: use devm_ managed clks
>
> On Sat, Apr 22, 2023 at 08:32:53PM +0800, Wang Zhang wrote:
> > If any wrong occurs in ocores_i2c_of_probe, the i2c->clk needs to be
> > released. But the function returns directly in line 701 without freeing
> > the clock. Even though we can fix it by freeing the clock manually if
> > platform_get_irq_optional fails, it may not be following the best practice.
> > The original code for this driver contains if (IS_ERR()) checks
> > throughout, explicitly allowing the driver to continue loading even if
> > devm_clk_get() fails.
> >
> > While it is not entirely clear why the original author implemented this
> > behavior, there may have been certain circumstances or issues that were not
> > apparent to us. It's possible that they were trying to work around a bug by
> > employing an unconventional solution.Using `devm_clk_get_enabled()` rather
> > than devm_clk_get() can automatically track the usage of clocks and free
> > them when they are no longer needed or an error occurs.
> >
> > fixing it by changing `ocores_i2c_of_probe` to use
> > `devm_clk_get_optional_enabled()` rather than `devm_clk_get()`, changing
> > `goto err_clk' to direct return and removing `err_clk`.
> >
> > Signed-off-by: Wang Zhang <[email protected]>
>
> Reviewed-by: Andrew Lunn <[email protected]>
>
> Andrew

Hi Andrew,
I'm checking in about my patch submission for i2c ocores that was
"review'ed" on 4/25, but its status has not been updated yet.
I would greatly appreciate it if you could provide me with an
update on the status of my submission. Is there any additional
information or documentation that I can provide to help expedite
the process?

Thank you very much for your time and attention. I look forward
to hearing from you soon.

Regards,
Wang Zhang

2023-05-23 12:19:35

[permalink] [raw]

Subject: Re: Re: [PATCH v3] i2c: ocores: use devm_ managed clks

> Hi Andrew,
> I'm checking in about my patch submission for i2c ocores that was
> "review'ed" on 4/25, but its status has not been updated yet.
> I would greatly appreciate it if you could provide me with an
> update on the status of my submission. Is there any additional
> information or documentation that I can provide to help expedite
> the process?

I think your patch was submitted during the merge window. This is the
point in time when subsystems give Linus patches for the next
release. During those two weeks new patches are not accepted.

https://www.kernel.org/doc/html/latest/process/2.Process.html

Now that the merge window is closed, please rebase your patch on

git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux.git i2c/for-next

and resubmit. Include my Reviewed-by tag.

Andrew

2023-05-23 15:13:32

[permalink] [raw]

Subject: [PATCH v3] i2c: ocores: use devm_ managed clks

While it is not entirely clear why the original author implemented this
behavior, there may have been certain circumstances or issues that were not
apparent to us. It's possible that they were trying to work around a bug by
employing an unconventional solution.Using `devm_clk_get_enabled()` rather
than devm_clk_get() can automatically track the usage of clocks and free
them when they are no longer needed or an error occurs.

fixing it by changing `ocores_i2c_of_probe` to use
`devm_clk_get_optional_enabled()` rather than `devm_clk_get()`, changing
`goto err_clk' to direct return and removing `err_clk`.

Signed-off-by: Wang Zhang <[email protected]>
Reviewed-by: Andrew Lunn <[email protected]>
---
drivers/i2c/busses/i2c-ocores.c | 57 +++++++++++++--------------------
1 file changed, 22 insertions(+), 35 deletions(-)

diff --git a/drivers/i2c/busses/i2c-ocores.c b/drivers/i2c/busses/i2c-ocores.c
index 2e575856c5cd..316d72cde3b9 100644
--- a/drivers/i2c/busses/i2c-ocores.c
+++ b/drivers/i2c/busses/i2c-ocores.c
@@ -552,16 +552,14 @@ static int ocores_i2c_of_probe(struct platform_device *pdev,
&clock_frequency);
i2c->bus_clock_khz = 100;

- i2c->clk = devm_clk_get(&pdev->dev, NULL);
+ i2c->clk = devm_clk_get_optional_enabled(&pdev->dev, NULL);

- if (!IS_ERR(i2c->clk)) {
- int ret = clk_prepare_enable(i2c->clk);
-
- if (ret) {
- dev_err(&pdev->dev,
- "clk_prepare_enable failed: %d\n", ret);
- return ret;
- }
+ if (IS_ERR(i2c->clk)) {
+ dev_err(&pdev->dev,
+ "devm_clk_get_optional_enabled failed\n");
+ return PTR_ERR(i2c->clk);
+ }
+ if (i2c->clk) {
i2c->ip_clock_khz = clk_get_rate(i2c->clk) / 1000;
if (clock_frequency_present)
i2c->bus_clock_khz = clock_frequency / 1000;
@@ -573,7 +571,6 @@ static int ocores_i2c_of_probe(struct platform_device *pdev,
if (!clock_frequency_present) {
dev_err(&pdev->dev,
"Missing required parameter 'opencores,ip-clock-frequency'\n");
- clk_disable_unprepare(i2c->clk);
return -ENODEV;
}
i2c->ip_clock_khz = clock_frequency / 1000;
@@ -678,8 +675,7 @@ static int ocores_i2c_probe(struct platform_device *pdev)
default:
dev_err(&pdev->dev, "Unsupported I/O width (%d)\n",
i2c->reg_io_width);
- ret = -EINVAL;
- goto err_clk;
+ return -EINVAL;
}
}

@@ -710,13 +706,13 @@ static int ocores_i2c_probe(struct platform_device *pdev)
pdev->name, i2c);
if (ret) {
dev_err(&pdev->dev, "Cannot claim IRQ\n");
- goto err_clk;
+ return ret;
}
}

ret = ocores_init(&pdev->dev, i2c);
if (ret)
- goto err_clk;
+ return ret;

/* hook up driver to tree */
platform_set_drvdata(pdev, i2c);
@@ -728,7 +724,7 @@ static int ocores_i2c_probe(struct platform_device *pdev)
/* add i2c adapter to i2c tree */
ret = i2c_add_adapter(&i2c->adap);
if (ret)
- goto err_clk;
+ return ret;

/* add in known devices to the bus */
if (pdata) {
@@ -737,10 +733,6 @@ static int ocores_i2c_probe(struct platform_device *pdev)
}

return 0;
-
-err_clk:
- clk_disable_unprepare(i2c->clk);
- return ret;
}

static int ocores_i2c_remove(struct platform_device *pdev)
@@ -755,9 +747,6 @@ static int ocores_i2c_remove(struct platform_device *pdev)
/* remove adapter & data */
i2c_del_adapter(&i2c->adap);

- if (!IS_ERR(i2c->clk))
- clk_disable_unprepare(i2c->clk);
-
return 0;
}

@@ -771,8 +760,7 @@ static int ocores_i2c_suspend(struct device *dev)
ctrl &= ~(OCI2C_CTRL_EN | OCI2C_CTRL_IEN);
oc_setreg(i2c, OCI2C_CONTROL, ctrl);

- if (!IS_ERR(i2c->clk))
- clk_disable_unprepare(i2c->clk);
+ clk_disable_unprepare(i2c->clk);
return 0;
}

@@ -780,19 +768,18 @@ static int ocores_i2c_resume(struct device *dev)
{
struct ocores_i2c *i2c = dev_get_drvdata(dev);

- if (!IS_ERR(i2c->clk)) {
- unsigned long rate;
- int ret = clk_prepare_enable(i2c->clk);
+ unsigned long rate;
+ int ret = clk_prepare_enable(i2c->clk);

- if (ret) {
- dev_err(dev,
- "clk_prepare_enable failed: %d\n", ret);
- return ret;
- }
- rate = clk_get_rate(i2c->clk) / 1000;
- if (rate)
- i2c->ip_clock_khz = rate;
+ if (ret) {
+ dev_err(dev,
+ "clk_prepare_enable failed: %d\n", ret);
+ return ret;
}
+ rate = clk_get_rate(i2c->clk) / 1000;
+ if (rate)
+ i2c->ip_clock_khz = rate;
+
return ocores_init(dev, i2c);
}

--
2.34.1

2023-05-24 16:12:20

[permalink] [raw]

Subject: [PATCH v3] i2c: ocores: use devm_ managed clks

While it is not entirely clear why the original author implemented this
behavior, there may have been certain circumstances or issues that were not
apparent to us. It's possible that they were trying to work around a bug by
employing an unconventional solution.Using `devm_clk_get_enabled()` rather
than devm_clk_get() can automatically track the usage of clocks and free
them when they are no longer needed or an error occurs.

fixing it by changing `ocores_i2c_of_probe` to use
`devm_clk_get_optional_enabled()` rather than `devm_clk_get()`, changing
`goto err_clk' to direct return and removing `err_clk`.

Signed-off-by: Wang Zhang <[email protected]>
Reviewed-by: Andrew Lunn <[email protected]>
---
v2->v3: use `devm_clk_get_optional_enabled()` to manage clks
v1->v2: change `ocores_i2c_of_probe` to use `devm_clk_get_enabled()`
---
drivers/i2c/busses/i2c-ocores.c | 57 +++++++++++++--------------------
1 file changed, 22 insertions(+), 35 deletions(-)

diff --git a/drivers/i2c/busses/i2c-ocores.c b/drivers/i2c/busses/i2c-ocores.c
index 2e575856c5cd..316d72cde3b9 100644
--- a/drivers/i2c/busses/i2c-ocores.c
+++ b/drivers/i2c/busses/i2c-ocores.c
@@ -552,16 +552,14 @@ static int ocores_i2c_of_probe(struct platform_device *pdev,
&clock_frequency);
i2c->bus_clock_khz = 100;

- i2c->clk = devm_clk_get(&pdev->dev, NULL);
+ i2c->clk = devm_clk_get_optional_enabled(&pdev->dev, NULL);

- if (!IS_ERR(i2c->clk)) {
- int ret = clk_prepare_enable(i2c->clk);
-
- if (ret) {
- dev_err(&pdev->dev,
- "clk_prepare_enable failed: %d\n", ret);
- return ret;
- }
+ if (IS_ERR(i2c->clk)) {
+ dev_err(&pdev->dev,
+ "devm_clk_get_optional_enabled failed\n");
+ return PTR_ERR(i2c->clk);
+ }
+ if (i2c->clk) {
i2c->ip_clock_khz = clk_get_rate(i2c->clk) / 1000;
if (clock_frequency_present)
i2c->bus_clock_khz = clock_frequency / 1000;
@@ -573,7 +571,6 @@ static int ocores_i2c_of_probe(struct platform_device *pdev,
if (!clock_frequency_present) {
dev_err(&pdev->dev,
"Missing required parameter 'opencores,ip-clock-frequency'\n");
- clk_disable_unprepare(i2c->clk);
return -ENODEV;
}
i2c->ip_clock_khz = clock_frequency / 1000;
@@ -678,8 +675,7 @@ static int ocores_i2c_probe(struct platform_device *pdev)
default:
dev_err(&pdev->dev, "Unsupported I/O width (%d)\n",
i2c->reg_io_width);
- ret = -EINVAL;
- goto err_clk;
+ return -EINVAL;
}
}

@@ -710,13 +706,13 @@ static int ocores_i2c_probe(struct platform_device *pdev)
pdev->name, i2c);
if (ret) {
dev_err(&pdev->dev, "Cannot claim IRQ\n");
- goto err_clk;
+ return ret;
}
}

ret = ocores_init(&pdev->dev, i2c);
if (ret)
- goto err_clk;
+ return ret;

/* hook up driver to tree */
platform_set_drvdata(pdev, i2c);
@@ -728,7 +724,7 @@ static int ocores_i2c_probe(struct platform_device *pdev)
/* add i2c adapter to i2c tree */
ret = i2c_add_adapter(&i2c->adap);
if (ret)
- goto err_clk;
+ return ret;

/* add in known devices to the bus */
if (pdata) {
@@ -737,10 +733,6 @@ static int ocores_i2c_probe(struct platform_device *pdev)
}

return 0;
-
-err_clk:
- clk_disable_unprepare(i2c->clk);
- return ret;
}

static int ocores_i2c_remove(struct platform_device *pdev)
@@ -755,9 +747,6 @@ static int ocores_i2c_remove(struct platform_device *pdev)
/* remove adapter & data */
i2c_del_adapter(&i2c->adap);

- if (!IS_ERR(i2c->clk))
- clk_disable_unprepare(i2c->clk);
-
return 0;
}

@@ -771,8 +760,7 @@ static int ocores_i2c_suspend(struct device *dev)
ctrl &= ~(OCI2C_CTRL_EN | OCI2C_CTRL_IEN);
oc_setreg(i2c, OCI2C_CONTROL, ctrl);

- if (!IS_ERR(i2c->clk))
- clk_disable_unprepare(i2c->clk);
+ clk_disable_unprepare(i2c->clk);
return 0;
}

@@ -780,19 +768,18 @@ static int ocores_i2c_resume(struct device *dev)
{
struct ocores_i2c *i2c = dev_get_drvdata(dev);

- if (!IS_ERR(i2c->clk)) {
- unsigned long rate;
- int ret = clk_prepare_enable(i2c->clk);
+ unsigned long rate;
+ int ret = clk_prepare_enable(i2c->clk);

- if (ret) {
- dev_err(dev,
- "clk_prepare_enable failed: %d\n", ret);
- return ret;
- }
- rate = clk_get_rate(i2c->clk) / 1000;
- if (rate)
- i2c->ip_clock_khz = rate;
+ if (ret) {
+ dev_err(dev,
+ "clk_prepare_enable failed: %d\n", ret);
+ return ret;
}
+ rate = clk_get_rate(i2c->clk) / 1000;
+ if (rate)
+ i2c->ip_clock_khz = rate;
+
return ocores_init(dev, i2c);
}

--
2.34.1

2023-05-24 16:25:34

[permalink] [raw]

Subject: [PATCH v3] i2c: ocores: use devm_ managed clks

While it is not entirely clear why the original author implemented this
behavior, there may have been certain circumstances or issues that were not
apparent to us. It's possible that they were trying to work around a bug by
employing an unconventional solution.Using `devm_clk_get_enabled()` rather
than devm_clk_get() can automatically track the usage of clocks and free
them when they are no longer needed or an error occurs.

fixing it by changing `ocores_i2c_of_probe` to use
`devm_clk_get_optional_enabled()` rather than `devm_clk_get()`, changing
`goto err_clk' to direct return and removing `err_clk`.

Signed-off-by: Wang Zhang <[email protected]>
Reviewed-by: Andrew Lunn <[email protected]>
---
v2->v3: use `devm_clk_get_optional_enabled()` to manage clks
v1->v2: change `ocores_i2c_of_probe` to use `devm_clk_get_enabled()`
---
drivers/i2c/busses/i2c-ocores.c | 57 +++++++++++++--------------------
1 file changed, 22 insertions(+), 35 deletions(-)

diff --git a/drivers/i2c/busses/i2c-ocores.c b/drivers/i2c/busses/i2c-ocores.c
index 2e575856c5cd..316d72cde3b9 100644
--- a/drivers/i2c/busses/i2c-ocores.c
+++ b/drivers/i2c/busses/i2c-ocores.c
@@ -552,16 +552,14 @@ static int ocores_i2c_of_probe(struct platform_device *pdev,
&clock_frequency);
i2c->bus_clock_khz = 100;

- i2c->clk = devm_clk_get(&pdev->dev, NULL);
+ i2c->clk = devm_clk_get_optional_enabled(&pdev->dev, NULL);

- if (!IS_ERR(i2c->clk)) {
- int ret = clk_prepare_enable(i2c->clk);
-
- if (ret) {
- dev_err(&pdev->dev,
- "clk_prepare_enable failed: %d\n", ret);
- return ret;
- }
+ if (IS_ERR(i2c->clk)) {
+ dev_err(&pdev->dev,
+ "devm_clk_get_optional_enabled failed\n");
+ return PTR_ERR(i2c->clk);
+ }
+ if (i2c->clk) {
i2c->ip_clock_khz = clk_get_rate(i2c->clk) / 1000;
if (clock_frequency_present)
i2c->bus_clock_khz = clock_frequency / 1000;
@@ -573,7 +571,6 @@ static int ocores_i2c_of_probe(struct platform_device *pdev,
if (!clock_frequency_present) {
dev_err(&pdev->dev,
"Missing required parameter 'opencores,ip-clock-frequency'\n");
- clk_disable_unprepare(i2c->clk);
return -ENODEV;
}
i2c->ip_clock_khz = clock_frequency / 1000;
@@ -678,8 +675,7 @@ static int ocores_i2c_probe(struct platform_device *pdev)
default:
dev_err(&pdev->dev, "Unsupported I/O width (%d)\n",
i2c->reg_io_width);
- ret = -EINVAL;
- goto err_clk;
+ return -EINVAL;
}
}

@@ -710,13 +706,13 @@ static int ocores_i2c_probe(struct platform_device *pdev)
pdev->name, i2c);
if (ret) {
dev_err(&pdev->dev, "Cannot claim IRQ\n");
- goto err_clk;
+ return ret;
}
}

ret = ocores_init(&pdev->dev, i2c);
if (ret)
- goto err_clk;
+ return ret;

/* hook up driver to tree */
platform_set_drvdata(pdev, i2c);
@@ -728,7 +724,7 @@ static int ocores_i2c_probe(struct platform_device *pdev)
/* add i2c adapter to i2c tree */
ret = i2c_add_adapter(&i2c->adap);
if (ret)
- goto err_clk;
+ return ret;

/* add in known devices to the bus */
if (pdata) {
@@ -737,10 +733,6 @@ static int ocores_i2c_probe(struct platform_device *pdev)
}

return 0;
-
-err_clk:
- clk_disable_unprepare(i2c->clk);
- return ret;
}

static int ocores_i2c_remove(struct platform_device *pdev)
@@ -755,9 +747,6 @@ static int ocores_i2c_remove(struct platform_device *pdev)
/* remove adapter & data */
i2c_del_adapter(&i2c->adap);

- if (!IS_ERR(i2c->clk))
- clk_disable_unprepare(i2c->clk);
-
return 0;
}

@@ -771,8 +760,7 @@ static int ocores_i2c_suspend(struct device *dev)
ctrl &= ~(OCI2C_CTRL_EN | OCI2C_CTRL_IEN);
oc_setreg(i2c, OCI2C_CONTROL, ctrl);

- if (!IS_ERR(i2c->clk))
- clk_disable_unprepare(i2c->clk);
+ clk_disable_unprepare(i2c->clk);
return 0;
}

@@ -780,19 +768,18 @@ static int ocores_i2c_resume(struct device *dev)
{
struct ocores_i2c *i2c = dev_get_drvdata(dev);

- if (!IS_ERR(i2c->clk)) {
- unsigned long rate;
- int ret = clk_prepare_enable(i2c->clk);
+ unsigned long rate;
+ int ret = clk_prepare_enable(i2c->clk);

- if (ret) {
- dev_err(dev,
- "clk_prepare_enable failed: %d\n", ret);
- return ret;
- }
- rate = clk_get_rate(i2c->clk) / 1000;
- if (rate)
- i2c->ip_clock_khz = rate;
+ if (ret) {
+ dev_err(dev,
+ "clk_prepare_enable failed: %d\n", ret);
+ return ret;
}
+ rate = clk_get_rate(i2c->clk) / 1000;
+ if (rate)
+ i2c->ip_clock_khz = rate;
+
return ocores_init(dev, i2c);
}

--
2.34.1

2023-05-24 18:53:54

[permalink] [raw]

Subject: Re: [PATCH v3] i2c: ocores: use devm_ managed clks

On Wed, May 24, 2023 at 11:43:18PM +0800, Wang Zhang wrote:
> While it is not entirely clear why the original author implemented this
> behavior, there may have been certain circumstances or issues that were not
> apparent to us.

This is an easy to answer question. :P Those are fancy new functions
which weren't available at the time.

regards,
dan carpenter

2023-05-24 19:43:24

by Christophe JAILLET

[permalink] [raw]

Subject: Re: [PATCH v3] i2c: ocores: use devm_ managed clks

Le 24/05/2023 à 17:43, Wang Zhang a écrit :
> While it is not entirely clear why the original author implemented this
> behavior, there may have been certain circumstances or issues that were not
> apparent to us. It's possible that they were trying to work around a bug by
> employing an unconventional solution.Using `devm_clk_get_enabled()` rather
> than devm_clk_get() can automatically track the usage of clocks and free
> them when they are no longer needed or an error occurs.
>
> fixing it by changing `ocores_i2c_of_probe` to use
> `devm_clk_get_optional_enabled()` rather than `devm_clk_get()`, changing
> `goto err_clk' to direct return and removing `err_clk`.
>
> Signed-off-by: Wang Zhang <[email protected]>
> Reviewed-by: Andrew Lunn <[email protected]>
> ---
> v2->v3: use `devm_clk_get_optional_enabled()` to manage clks
> v1->v2: change `ocores_i2c_of_probe` to use `devm_clk_get_enabled()`
> ---
> drivers/i2c/busses/i2c-ocores.c | 57 +++++++++++++--------------------
> 1 file changed, 22 insertions(+), 35 deletions(-)
>
> diff --git a/drivers/i2c/busses/i2c-ocores.c b/drivers/i2c/busses/i2c-ocores.c
> index 2e575856c5cd..316d72cde3b9 100644
> --- a/drivers/i2c/busses/i2c-ocores.c
> +++ b/drivers/i2c/busses/i2c-ocores.c
> @@ -552,16 +552,14 @@ static int ocores_i2c_of_probe(struct platform_device *pdev,
> &clock_frequency);
> i2c->bus_clock_khz = 100;
>
> - i2c->clk = devm_clk_get(&pdev->dev, NULL);
> + i2c->clk = devm_clk_get_optional_enabled(&pdev->dev, NULL);
>
> - if (!IS_ERR(i2c->clk)) {
> - int ret = clk_prepare_enable(i2c->clk);
> -
> - if (ret) {
> - dev_err(&pdev->dev,
> - "clk_prepare_enable failed: %d\n", ret);
> - return ret;
> - }
> + if (IS_ERR(i2c->clk)) {
> + dev_err(&pdev->dev,
> + "devm_clk_get_optional_enabled failed\n");

Maybe dev_err_probe() would be nice here. This would log the error code,
and filter -EPROBE_DEFER, should it happen.

> + return PTR_ERR(i2c->clk);
> + }
> + if (i2c->clk) {
> i2c->ip_clock_khz = clk_get_rate(i2c->clk) / 1000;
> if (clock_frequency_present)
> i2c->bus_clock_khz = clock_frequency / 1000;
> @@ -573,7 +571,6 @@ static int ocores_i2c_of_probe(struct platform_device *pdev,
> if (!clock_frequency_present) {
> dev_err(&pdev->dev,
> "Missing required parameter 'opencores,ip-clock-frequency'\n");
> - clk_disable_unprepare(i2c->clk);
> return -ENODEV;
> }
> i2c->ip_clock_khz = clock_frequency / 1000;
> @@ -678,8 +675,7 @@ static int ocores_i2c_probe(struct platform_device *pdev)
> default:
> dev_err(&pdev->dev, "Unsupported I/O width (%d)\n",
> i2c->reg_io_width);
> - ret = -EINVAL;
> - goto err_clk;
> + return -EINVAL;
> }
> }
>
> @@ -710,13 +706,13 @@ static int ocores_i2c_probe(struct platform_device *pdev)
> pdev->name, i2c);
> if (ret) {
> dev_err(&pdev->dev, "Cannot claim IRQ\n");
> - goto err_clk;
> + return ret;
> }
> }
>
> ret = ocores_init(&pdev->dev, i2c);
> if (ret)
> - goto err_clk;
> + return ret;
>
> /* hook up driver to tree */
> platform_set_drvdata(pdev, i2c);
> @@ -728,7 +724,7 @@ static int ocores_i2c_probe(struct platform_device *pdev)
> /* add i2c adapter to i2c tree */
> ret = i2c_add_adapter(&i2c->adap);
> if (ret)
> - goto err_clk;
> + return ret;
>
> /* add in known devices to the bus */
> if (pdata) {
> @@ -737,10 +733,6 @@ static int ocores_i2c_probe(struct platform_device *pdev)
> }
>
> return 0;
> -
> -err_clk:
> - clk_disable_unprepare(i2c->clk);
> - return ret;
> }
>
> static int ocores_i2c_remove(struct platform_device *pdev)
> @@ -755,9 +747,6 @@ static int ocores_i2c_remove(struct platform_device *pdev)
> /* remove adapter & data */
> i2c_del_adapter(&i2c->adap);
>
> - if (!IS_ERR(i2c->clk))
> - clk_disable_unprepare(i2c->clk);
> -
> return 0;
> }
>
> @@ -771,8 +760,7 @@ static int ocores_i2c_suspend(struct device *dev)
> ctrl &= ~(OCI2C_CTRL_EN | OCI2C_CTRL_IEN);
> oc_setreg(i2c, OCI2C_CONTROL, ctrl);
>
> - if (!IS_ERR(i2c->clk))
> - clk_disable_unprepare(i2c->clk);
> + clk_disable_unprepare(i2c->clk);
> return 0;
> }
>
> @@ -780,19 +768,18 @@ static int ocores_i2c_resume(struct device *dev)
> {
> struct ocores_i2c *i2c = dev_get_drvdata(dev);
>
> - if (!IS_ERR(i2c->clk)) {
> - unsigned long rate;
> - int ret = clk_prepare_enable(i2c->clk);
> + unsigned long rate;
> + int ret = clk_prepare_enable(i2c->clk);
>
> - if (ret) {
> - dev_err(dev,
> - "clk_prepare_enable failed: %d\n", ret);
> - return ret;
> - }
> - rate = clk_get_rate(i2c->clk) / 1000;
> - if (rate)
> - i2c->ip_clock_khz = rate;
> + if (ret) {
> + dev_err(dev,
> + "clk_prepare_enable failed: %d\n", ret);
> + return ret;
> }
> + rate = clk_get_rate(i2c->clk) / 1000;

Now (because of the devm_clk_get_optional_enabled()), i2c->clk can be
NULL, so this would deference a NULL pointer.

CJ

> + if (rate)
> + i2c->ip_clock_khz = rate;
> +
> return ocores_init(dev, i2c);
> }
>

2023-05-25 03:56:37

by 张网

[permalink] [raw]

Subject: Re: Re: [PATCH v3] i2c: ocores: use devm_ managed clks

Hi Christophe,

Thanks for your suggestions. However, both clk_get_rate and clk_prepare_enable
will return 0 if i2c->clk is NULL, so I think we may not need to take this issue
into account.

Regards,
Wang Zhang

"Christophe JAILLET" <[email protected]>写道：
> Le 24/05/2023 à 17:43, Wang Zhang a écrit :
> > While it is not entirely clear why the original author implemented this
> > behavior, there may have been certain circumstances or issues that were not
> > apparent to us. It's possible that they were trying to work around a bug by
> > employing an unconventional solution.Using `devm_clk_get_enabled()` rather
> > than devm_clk_get() can automatically track the usage of clocks and free
> > them when they are no longer needed or an error occurs.
> >
> > fixing it by changing `ocores_i2c_of_probe` to use
> > `devm_clk_get_optional_enabled()` rather than `devm_clk_get()`, changing
> > `goto err_clk' to direct return and removing `err_clk`.
> >
> > Signed-off-by: Wang Zhang <[email protected]>
> > Reviewed-by: Andrew Lunn <[email protected]>
> > ---
> > v2->v3: use `devm_clk_get_optional_enabled()` to manage clks
> > v1->v2: change `ocores_i2c_of_probe` to use `devm_clk_get_enabled()`
> > ---
> > drivers/i2c/busses/i2c-ocores.c | 57 +++++++++++++--------------------
> > 1 file changed, 22 insertions(+), 35 deletions(-)
> >
> > diff --git a/drivers/i2c/busses/i2c-ocores.c b/drivers/i2c/busses/i2c-ocores.c
> > index 2e575856c5cd..316d72cde3b9 100644
> > --- a/drivers/i2c/busses/i2c-ocores.c
> > +++ b/drivers/i2c/busses/i2c-ocores.c
> > @@ -552,16 +552,14 @@ static int ocores_i2c_of_probe(struct platform_device *pdev,
> > &clock_frequency);
> > i2c->bus_clock_khz = 100;
> >
> > - i2c->clk = devm_clk_get(&pdev->dev, NULL);
> > + i2c->clk = devm_clk_get_optional_enabled(&pdev->dev, NULL);
> >
> > - if (!IS_ERR(i2c->clk)) {
> > - int ret = clk_prepare_enable(i2c->clk);
> > -
> > - if (ret) {
> > - dev_err(&pdev->dev,
> > - "clk_prepare_enable failed: %d\n", ret);
> > - return ret;
> > - }
> > + if (IS_ERR(i2c->clk)) {
> > + dev_err(&pdev->dev,
> > + "devm_clk_get_optional_enabled failed\n");
>
> Maybe dev_err_probe() would be nice here. This would log the error code,
> and filter -EPROBE_DEFER, should it happen.
>
> > + return PTR_ERR(i2c->clk);
> > + }
> > + if (i2c->clk) {
> > i2c->ip_clock_khz = clk_get_rate(i2c->clk) / 1000;
> > if (clock_frequency_present)
> > i2c->bus_clock_khz = clock_frequency / 1000;
> > @@ -573,7 +571,6 @@ static int ocores_i2c_of_probe(struct platform_device *pdev,
> > if (!clock_frequency_present) {
> > dev_err(&pdev->dev,
> > "Missing required parameter 'opencores,ip-clock-frequency'\n");
> > - clk_disable_unprepare(i2c->clk);
> > return -ENODEV;
> > }
> > i2c->ip_clock_khz = clock_frequency / 1000;
> > @@ -678,8 +675,7 @@ static int ocores_i2c_probe(struct platform_device *pdev)
> > default:
> > dev_err(&pdev->dev, "Unsupported I/O width (%d)\n",
> > i2c->reg_io_width);
> > - ret = -EINVAL;
> > - goto err_clk;
> > + return -EINVAL;
> > }
> > }
> >
> > @@ -710,13 +706,13 @@ static int ocores_i2c_probe(struct platform_device *pdev)
> > pdev->name, i2c);
> > if (ret) {
> > dev_err(&pdev->dev, "Cannot claim IRQ\n");
> > - goto err_clk;
> > + return ret;
> > }
> > }
> >
> > ret = ocores_init(&pdev->dev, i2c);
> > if (ret)
> > - goto err_clk;
> > + return ret;
> >
> > /* hook up driver to tree */
> > platform_set_drvdata(pdev, i2c);
> > @@ -728,7 +724,7 @@ static int ocores_i2c_probe(struct platform_device *pdev)
> > /* add i2c adapter to i2c tree */
> > ret = i2c_add_adapter(&i2c->adap);
> > if (ret)
> > - goto err_clk;
> > + return ret;
> >
> > /* add in known devices to the bus */
> > if (pdata) {
> > @@ -737,10 +733,6 @@ static int ocores_i2c_probe(struct platform_device *pdev)
> > }
> >
> > return 0;
> > -
> > -err_clk:
> > - clk_disable_unprepare(i2c->clk);
> > - return ret;
> > }
> >
> > static int ocores_i2c_remove(struct platform_device *pdev)
> > @@ -755,9 +747,6 @@ static int ocores_i2c_remove(struct platform_device *pdev)
> > /* remove adapter & data */
> > i2c_del_adapter(&i2c->adap);
> >
> > - if (!IS_ERR(i2c->clk))
> > - clk_disable_unprepare(i2c->clk);
> > -
> > return 0;
> > }
> >
> > @@ -771,8 +760,7 @@ static int ocores_i2c_suspend(struct device *dev)
> > ctrl &= ~(OCI2C_CTRL_EN | OCI2C_CTRL_IEN);
> > oc_setreg(i2c, OCI2C_CONTROL, ctrl);
> >
> > - if (!IS_ERR(i2c->clk))
> > - clk_disable_unprepare(i2c->clk);
> > + clk_disable_unprepare(i2c->clk);
> > return 0;
> > }
> >
> > @@ -780,19 +768,18 @@ static int ocores_i2c_resume(struct device *dev)
> > {
> > struct ocores_i2c *i2c = dev_get_drvdata(dev);
> >
> > - if (!IS_ERR(i2c->clk)) {
> > - unsigned long rate;
> > - int ret = clk_prepare_enable(i2c->clk);
> > + unsigned long rate;
> > + int ret = clk_prepare_enable(i2c->clk);
> >
> > - if (ret) {
> > - dev_err(dev,
> > - "clk_prepare_enable failed: %d\n", ret);
> > - return ret;
> > - }
> > - rate = clk_get_rate(i2c->clk) / 1000;
> > - if (rate)
> > - i2c->ip_clock_khz = rate;
> > + if (ret) {
> > + dev_err(dev,
> > + "clk_prepare_enable failed: %d\n", ret);
> > + return ret;
> > }
> > + rate = clk_get_rate(i2c->clk) / 1000;
>
> Now (because of the devm_clk_get_optional_enabled()), i2c->clk can be
> NULL, so this would deference a NULL pointer.
>
> CJ
>
>
> > + if (rate)
> > + i2c->ip_clock_khz = rate;
> > +
> > return ocores_init(dev, i2c);
> > }
> >

2023-05-25 09:50:41

[permalink] [raw]

Subject: Re: [PATCH v3] i2c: ocores: use devm_ managed clks

On Wed, May 24, 2023 at 11:43:18PM +0800, Wang Zhang wrote:
> @@ -780,19 +768,18 @@ static int ocores_i2c_resume(struct device *dev)
> {
> struct ocores_i2c *i2c = dev_get_drvdata(dev);
>
> - if (!IS_ERR(i2c->clk)) {
> - unsigned long rate;
> - int ret = clk_prepare_enable(i2c->clk);
> + unsigned long rate;
> + int ret = clk_prepare_enable(i2c->clk);

Don't put functions which can fail in the declaration block. Generally
the declaration block is for preliminary stuff, and the important
actions should be in the code block. There should not be a blank line
before the function call and the error checking.

>
> - if (ret) {
> - dev_err(dev,
> - "clk_prepare_enable failed: %d\n", ret);
> - return ret;
> - }
> - rate = clk_get_rate(i2c->clk) / 1000;
> - if (rate)
> - i2c->ip_clock_khz = rate;
> + if (ret) {
> + dev_err(dev,
> + "clk_prepare_enable failed: %d\n", ret);

This can fit on one line now.

int ret;

ret = clk_prepare_enable(i2c->clk);
if (ret) {
dev_err(dev, "clk_prepare_enable failed: %d\n", ret);
return ret;
}

regards,
dan carpenter

> + return ret;
> }
> + rate = clk_get_rate(i2c->clk) / 1000;
> + if (rate)
> + i2c->ip_clock_khz = rate;
> +
> return ocores_init(dev, i2c);

2023-05-25 09:58:47

[permalink] [raw]

Subject: Re: [PATCH v3] i2c: ocores: use devm_ managed clks

On Wed, May 24, 2023 at 09:21:56PM +0200, Christophe JAILLET wrote:
> > + if (ret) {
> > + dev_err(dev,
> > + "clk_prepare_enable failed: %d\n", ret);
> > + return ret;
> > }
> > + rate = clk_get_rate(i2c->clk) / 1000;
>
> Now (because of the devm_clk_get_optional_enabled()), i2c->clk can be NULL,
> so this would deference a NULL pointer.
>

No, it's fine. clk_get_rate() checks for NULL. When a function returns
a mix of error pointers and NULL, like devm_clk_get_optional_enabled(),
then all the functions like this must have NULL checks built it.

regards,
dan carpenter

2023-05-25 09:59:59

[permalink] [raw]

Subject: Re: [PATCH v3] i2c: ocores: use devm_ managed clks

On Thu, May 25, 2023 at 08:02:02AM +0300, Dan Carpenter wrote:
> On Wed, May 24, 2023 at 11:43:18PM +0800, Wang Zhang wrote:
> > @@ -780,19 +768,18 @@ static int ocores_i2c_resume(struct device *dev)
> > {
> > struct ocores_i2c *i2c = dev_get_drvdata(dev);
> >
> > - if (!IS_ERR(i2c->clk)) {
> > - unsigned long rate;
> > - int ret = clk_prepare_enable(i2c->clk);
> > + unsigned long rate;
> > + int ret = clk_prepare_enable(i2c->clk);
>
> Don't put functions which can fail in the declaration block. Generally
> the declaration block is for preliminary stuff, and the important
> actions should be in the code block. There should not be a blank line
> before the function call and the error checking.

s/before/between/.

regards,
dan carpenter

2023-05-25 20:15:52

by Christophe JAILLET

[permalink] [raw]

Subject: Re: [PATCH v3] i2c: ocores: use devm_ managed clks

Le 25/05/2023 à 05:33, 张网 a écrit :
> Hi Christophe,
>
> Thanks for your suggestions. However, both clk_get_rate and clk_prepare_enable
> will return 0 if i2c->clk is NULL, so I think we may not need to take this issue
> into account.
>
> Regards,
> Wang Zhang
>

Ouch!

For some reaon, when I read:
> + rate = clk_get_rate(i2c->clk) / 1000;

I read "if i2c->clk is NULL, then the i2c pointer is NULL as well and is
dereferenced".

:/

sorry for the noise.

CJ (slightly ashamed)

2023-05-26 07:22:46