This is the start of the stable review cycle for the 4.9.224 release.
There are 90 patches in this series, all will be posted as a response
to this one. If anyone has any issues with these being applied, please
let me know.
Responses should be made by Wed, 20 May 2020 17:32:42 +0000.
Anything received after that time might be too late.
The whole patch series can be found in one patch at:
https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.9.224-rc1.gz
or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.9.y
and the diffstat can be found below.
thanks,
greg k-h
-------------
Pseudo-Shortlog of commits:
Greg Kroah-Hartman <[email protected]>
Linux 4.9.224-rc1
Sergei Trofimovich <[email protected]>
Makefile: disallow data races on gcc-10 as well
Jim Mattson <[email protected]>
KVM: x86: Fix off-by-one error in kvm_vcpu_ioctl_x86_setup_mce
Geert Uytterhoeven <[email protected]>
ARM: dts: r8a7740: Add missing extal2 to CPG node
Geert Uytterhoeven <[email protected]>
ARM: dts: r8a73a4: Add missing CMT1 interrupts
Kai-Heng Feng <[email protected]>
Revert "ALSA: hda/realtek: Fix pop noise on ALC225"
Wei Yongjun <[email protected]>
usb: gadget: legacy: fix error return code in cdc_bind()
Wei Yongjun <[email protected]>
usb: gadget: legacy: fix error return code in gncm_bind()
Christophe JAILLET <[email protected]>
usb: gadget: audio: Fix a missing error return value in audio_bind()
Christophe JAILLET <[email protected]>
usb: gadget: net2272: Fix a memory leak in an error handling path in 'net2272_plat_probe()'
Eric W. Biederman <[email protected]>
exec: Move would_dump into flush_old_exec
Borislav Petkov <[email protected]>
x86: Fix early boot crash on gcc-10, third try
Fabio Estevam <[email protected]>
ARM: dts: imx27-phytec-phycard-s-rdk: Fix the I2C1 pinctrl entries
Sriharsha Allenki <[email protected]>
usb: xhci: Fix NULL pointer dereference when enqueuing trbs from urb sg list
Kyungtae Kim <[email protected]>
USB: gadget: fix illegal array access in binding with UDC
Jesus Ramos <[email protected]>
ALSA: usb-audio: Add control message quirk delay for Kingston HyperX headset
Takashi Iwai <[email protected]>
ALSA: rawmidi: Fix racy buffer resize under concurrent accesses
Takashi Iwai <[email protected]>
ALSA: rawmidi: Initialize allocated buffers
Takashi Iwai <[email protected]>
ALSA: hda/realtek - Limit int mic boost for Thinkpad T530
Zefan Li <[email protected]>
netprio_cgroup: Fix unlimited memory leak of v2 cgroups
Paolo Abeni <[email protected]>
net: ipv4: really enforce backoff for redirects
Maciej Żenczykowski <[email protected]>
Revert "ipv6: add mtu lock check in __ip6_rt_update_pmtu"
Paolo Abeni <[email protected]>
netlabel: cope with NULL catmap
Cong Wang <[email protected]>
net: fix a potential recursive NETDEV_FEAT_CHANGE
Linus Torvalds <[email protected]>
gcc-10: disable 'restrict' warning for now
Linus Torvalds <[email protected]>
gcc-10: disable 'stringop-overflow' warning for now
Linus Torvalds <[email protected]>
gcc-10: disable 'array-bounds' warning for now
Linus Torvalds <[email protected]>
gcc-10: disable 'zero-length-bounds' warning for now
Linus Torvalds <[email protected]>
gcc-10: avoid shadowing standard library 'free()' in crypto
Florian Fainelli <[email protected]>
net: phy: micrel: Use strlcpy() for ethtool::get_strings
Linus Torvalds <[email protected]>
Stop the ad-hoc games with -Wno-maybe-initialized
Masahiro Yamada <[email protected]>
kbuild: compute false-positive -Wmaybe-uninitialized cases in Kconfig
Linus Torvalds <[email protected]>
gcc-10 warnings: fix low-hanging fruit
Jason Gunthorpe <[email protected]>
pnp: Use list_for_each_entry() instead of open coding
Jack Morgenstein <[email protected]>
IB/mlx4: Test return value of calls to ib_get_cached_pkey
Arnd Bergmann <[email protected]>
netfilter: conntrack: avoid gcc-10 zero-length-bounds warning
Dan Carpenter <[email protected]>
i40iw: Fix error handling in i40iw_manage_arp_cache()
Grace Kao <[email protected]>
pinctrl: cherryview: Add missing spinlock usage in chv_gpio_irq_handler
Vasily Averin <[email protected]>
ipc/util.c: sysvipc_find_ipc() incorrectly updates position index
Vasily Averin <[email protected]>
drm/qxl: lost qxl_bo_kunmap_atomic_page in qxl_image_init_helper()
Kai Vehmanen <[email protected]>
ALSA: hda/hdmi: fix race in monitor detection during probe
Lubomir Rintel <[email protected]>
dmaengine: mmp_tdma: Reset channel error on release
Madhuparna Bhowmik <[email protected]>
dmaengine: pch_dma.c: Avoid data race between probe and irq handler
Ronnie Sahlberg <[email protected]>
cifs: Fix a race condition with cifs_echo_request
Samuel Cabrero <[email protected]>
cifs: Check for timeout on Negotiate stage
wuxu.wu <[email protected]>
spi: spi-dw: Add lock protect dw_spi rx/tx to prevent concurrent calls
Wu Bo <[email protected]>
scsi: sg: add sg_remove_request in sg_write
Arnd Bergmann <[email protected]>
drop_monitor: work around gcc-10 stringop-overflow warning
Christophe JAILLET <[email protected]>
net: moxa: Fix a potential double 'free_irq()'
Christophe JAILLET <[email protected]>
net/sonic: Fix a resource leak in an error handling path in 'jazz_sonic_probe()'
Hugh Dickins <[email protected]>
shmem: fix possible deadlocks on shmlock_user_lock
Vladis Dronov <[email protected]>
ptp: free ptp device pin descriptors properly
Vladis Dronov <[email protected]>
ptp: fix the race between the release of ptp_clock and cdev
YueHaibing <[email protected]>
ptp: Fix pass zero to ERR_PTR() in ptp_clock_register
Logan Gunthorpe <[email protected]>
chardev: add helper function to register char devs with a struct device
Dmitry Torokhov <[email protected]>
ptp: create "pins" together with the rest of attributes
Dmitry Torokhov <[email protected]>
ptp: use is_visible method to hide unused attributes
Dmitry Torokhov <[email protected]>
ptp: do not explicitly set drvdata in ptp_clock_register()
Cengiz Can <[email protected]>
blktrace: fix dereference after null check
Jan Kara <[email protected]>
blktrace: Protect q->blk_trace with RCU
Jens Axboe <[email protected]>
blktrace: fix trace mutex deadlock
Jens Axboe <[email protected]>
blktrace: fix unlocked access to init/start-stop/teardown
Waiman Long <[email protected]>
blktrace: Fix potential deadlock between delete & sysfs ops
Sabrina Dubroca <[email protected]>
net: ipv6_stub: use ip6_dst_lookup_flow instead of ip6_dst_lookup
Sabrina Dubroca <[email protected]>
net: ipv6: add net argument to ip6_dst_lookup_flow
Shijie Luo <[email protected]>
ext4: add cond_resched() to ext4_protect_reserved_inode
Kees Cook <[email protected]>
binfmt_elf: Do not move brk for INTERP-less ET_EXEC
Ivan Delalande <[email protected]>
scripts/decodecode: fix trapping instruction formatting
Josh Poimboeuf <[email protected]>
objtool: Fix stack offset tracking for indirect CFAs
Xiyu Yang <[email protected]>
batman-adv: Fix refcnt leak in batadv_v_ogm_process
Xiyu Yang <[email protected]>
batman-adv: Fix refcnt leak in batadv_store_throughput_override
Xiyu Yang <[email protected]>
batman-adv: Fix refcnt leak in batadv_show_throughput_override
George Spelvin <[email protected]>
batman-adv: fix batadv_nc_random_weight_tq
David Hildenbrand <[email protected]>
mm/page_alloc: fix watchdog soft lockups during set_zone_contiguous()
Steven Rostedt (VMware) <[email protected]>
tracing: Add a vmalloc_sync_mappings() for safe measure
Oliver Neukum <[email protected]>
USB: serial: garmin_gps: add sanity checking for data length
Oliver Neukum <[email protected]>
USB: uas: add quirk for LaCie 2Big Quadra
Kees Cook <[email protected]>
binfmt_elf: move brk out of mmap when doing direct loader exec
Hans de Goede <[email protected]>
Revert "ACPI / video: Add force_native quirk for HP Pavilion dv6"
Michael Chan <[email protected]>
bnxt_en: Improve AER slot reset.
Moshe Shemesh <[email protected]>
net/mlx5: Fix command entry leak in Internal Error State
Moshe Shemesh <[email protected]>
net/mlx5: Fix forced completion access non initialized command entry
Michael Chan <[email protected]>
bnxt_en: Fix VLAN acceleration handling in bnxt_fix_features().
Eric Dumazet <[email protected]>
sch_sfq: validate silly quantum values
Eric Dumazet <[email protected]>
sch_choke: avoid potential panic in choke_reset()
Matt Jolly <[email protected]>
net: usb: qmi_wwan: add support for DW5816e
Tariq Toukan <[email protected]>
net/mlx4_core: Fix use of ENOSPC around mlx4_counter_alloc()
Scott Dial <[email protected]>
net: macsec: preserve ingress frame ordering
Eric Dumazet <[email protected]>
fq_codel: fix TCA_FQ_CODEL_DROP_BATCH_SIZE sanity checks
Julia Lawall <[email protected]>
dp83640: reverse arguments to list_add_tail
Matt Jolly <[email protected]>
USB: serial: qcserial: Add DW5816e support
-------------
Diffstat:
Makefile | 25 +--
arch/arm/boot/dts/imx27-phytec-phycard-s-rdk.dts | 4 +-
arch/arm/boot/dts/r8a73a4.dtsi | 9 +-
arch/arm/boot/dts/r8a7740.dtsi | 2 +-
arch/x86/include/asm/stackprotector.h | 7 +-
arch/x86/kernel/smpboot.c | 8 +
arch/x86/kvm/x86.c | 2 +-
arch/x86/xen/smp.c | 1 +
block/blk-core.c | 3 +
crypto/lrw.c | 4 +-
crypto/xts.c | 4 +-
drivers/acpi/video_detect.c | 11 --
drivers/dma/mmp_tdma.c | 2 +
drivers/dma/pch_dma.c | 2 +-
drivers/gpu/drm/qxl/qxl_image.c | 3 +-
drivers/infiniband/core/addr.c | 8 +-
drivers/infiniband/hw/i40iw/i40iw_hw.c | 2 +-
drivers/infiniband/hw/mlx4/qp.c | 14 +-
drivers/infiniband/sw/rxe/rxe_net.c | 8 +-
drivers/net/ethernet/broadcom/bnxt/bnxt.c | 18 ++-
drivers/net/ethernet/mellanox/mlx4/main.c | 4 +-
drivers/net/ethernet/mellanox/mlx5/core/cmd.c | 6 +-
drivers/net/ethernet/moxa/moxart_ether.c | 2 +-
drivers/net/ethernet/natsemi/jazzsonic.c | 6 +-
drivers/net/geneve.c | 4 +-
drivers/net/macsec.c | 3 +-
drivers/net/phy/dp83640.c | 2 +-
drivers/net/phy/micrel.c | 4 +-
drivers/net/usb/qmi_wwan.c | 1 +
drivers/net/vxlan.c | 10 +-
drivers/pinctrl/intel/pinctrl-cherryview.c | 4 +
drivers/ptp/ptp_clock.c | 42 ++---
drivers/ptp/ptp_private.h | 9 +-
drivers/ptp/ptp_sysfs.c | 162 ++++++++-----------
drivers/scsi/sg.c | 4 +-
drivers/spi/spi-dw.c | 15 +-
drivers/spi/spi-dw.h | 1 +
drivers/usb/gadget/configfs.c | 3 +
drivers/usb/gadget/legacy/audio.c | 4 +-
drivers/usb/gadget/legacy/cdc2.c | 4 +-
drivers/usb/gadget/legacy/ncm.c | 4 +-
drivers/usb/gadget/udc/net2272.c | 2 +
drivers/usb/host/xhci-ring.c | 4 +-
drivers/usb/serial/garmin_gps.c | 4 +-
drivers/usb/serial/qcserial.c | 1 +
drivers/usb/storage/unusual_uas.h | 7 +
fs/binfmt_elf.c | 12 ++
fs/char_dev.c | 86 ++++++++++
fs/cifs/cifssmb.c | 12 ++
fs/cifs/connect.c | 11 +-
fs/cifs/smb2pdu.c | 12 ++
fs/exec.c | 4 +-
fs/ext4/block_validity.c | 1 +
include/linux/blkdev.h | 3 +-
include/linux/blktrace_api.h | 18 ++-
include/linux/cdev.h | 5 +
include/linux/compiler.h | 7 +
include/linux/fs.h | 2 +-
include/linux/pnp.h | 29 ++--
include/linux/posix-clock.h | 19 ++-
include/linux/tty.h | 2 +-
include/net/addrconf.h | 6 +-
include/net/ipv6.h | 2 +-
include/net/netfilter/nf_conntrack.h | 2 +-
include/sound/rawmidi.h | 1 +
init/main.c | 2 +
ipc/util.c | 12 +-
kernel/time/posix-clock.c | 31 ++--
kernel/trace/blktrace.c | 191 +++++++++++++++++------
kernel/trace/trace.c | 13 ++
mm/page_alloc.c | 1 +
mm/shmem.c | 7 +-
net/batman-adv/bat_v_ogm.c | 2 +-
net/batman-adv/network-coding.c | 9 +-
net/batman-adv/sysfs.c | 3 +-
net/core/dev.c | 4 +-
net/core/drop_monitor.c | 11 +-
net/core/netprio_cgroup.c | 2 +
net/dccp/ipv6.c | 6 +-
net/ipv4/cipso_ipv4.c | 6 +-
net/ipv4/route.c | 2 +-
net/ipv6/addrconf_core.c | 11 +-
net/ipv6/af_inet6.c | 4 +-
net/ipv6/calipso.c | 3 +-
net/ipv6/datagram.c | 2 +-
net/ipv6/inet6_connection_sock.c | 4 +-
net/ipv6/ip6_output.c | 8 +-
net/ipv6/raw.c | 2 +-
net/ipv6/route.c | 6 +-
net/ipv6/syncookies.c | 2 +-
net/ipv6/tcp_ipv6.c | 4 +-
net/l2tp/l2tp_ip6.c | 2 +-
net/mpls/af_mpls.c | 7 +-
net/netfilter/nf_conntrack_core.c | 4 +-
net/netlabel/netlabel_kapi.c | 6 +
net/sched/sch_choke.c | 3 +-
net/sched/sch_fq_codel.c | 2 +-
net/sched/sch_sfq.c | 9 ++
net/sctp/ipv6.c | 4 +-
net/tipc/udp_media.c | 9 +-
scripts/decodecode | 2 +-
sound/core/rawmidi.c | 35 ++++-
sound/pci/hda/patch_hdmi.c | 2 +
sound/pci/hda/patch_realtek.c | 12 +-
sound/usb/quirks.c | 9 +-
tools/objtool/check.c | 2 +-
106 files changed, 747 insertions(+), 392 deletions(-)
From: Ivan Delalande <[email protected]>
commit e08df079b23e2e982df15aa340bfbaf50f297504 upstream.
If the trapping instruction contains a ':', for a memory access through
segment registers for example, the sed substitution will insert the '*'
marker in the middle of the instruction instead of the line address:
2b: 65 48 0f c7 0f cmpxchg16b %gs:*(%rdi) <-- trapping instruction
I started to think I had forgotten some quirk of the assembly syntax
before noticing that it was actually coming from the script. Fix it to
add the address marker at the right place for these instructions:
28: 49 8b 06 mov (%r14),%rax
2b:* 65 48 0f c7 0f cmpxchg16b %gs:(%rdi) <-- trapping instruction
30: 0f 94 c0 sete %al
Fixes: 18ff44b189e2 ("scripts/decodecode: make faulting insn ptr more robust")
Signed-off-by: Ivan Delalande <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Reviewed-by: Borislav Petkov <[email protected]>
Link: http://lkml.kernel.org/r/20200419223653.GA31248@visor
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
scripts/decodecode | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/scripts/decodecode
+++ b/scripts/decodecode
@@ -98,7 +98,7 @@ faultlinenum=$(( $(wc -l $T.oo | cut -d
faultline=`cat $T.dis | head -1 | cut -d":" -f2-`
faultline=`echo "$faultline" | sed -e 's/\[/\\\[/g; s/\]/\\\]/g'`
-cat $T.oo | sed -e "${faultlinenum}s/^\(.*:\)\(.*\)/\1\*\2\t\t<-- trapping instruction/"
+cat $T.oo | sed -e "${faultlinenum}s/^\([^:]*:\)\(.*\)/\1\*\2\t\t<-- trapping instruction/"
echo
cat $T.aa
cleanup
From: Hugh Dickins <[email protected]>
[ Upstream commit ea0dfeb4209b4eab954d6e00ed136bc6b48b380d ]
Recent commit 71725ed10c40 ("mm: huge tmpfs: try to split_huge_page()
when punching hole") has allowed syzkaller to probe deeper, uncovering a
long-standing lockdep issue between the irq-unsafe shmlock_user_lock,
the irq-safe xa_lock on mapping->i_pages, and shmem inode's info->lock
which nests inside xa_lock (or tree_lock) since 4.8's shmem_uncharge().
user_shm_lock(), servicing SysV shmctl(SHM_LOCK), wants
shmlock_user_lock while its caller shmem_lock() holds info->lock with
interrupts disabled; but hugetlbfs_file_setup() calls user_shm_lock()
with interrupts enabled, and might be interrupted by a writeback endio
wanting xa_lock on i_pages.
This may not risk an actual deadlock, since shmem inodes do not take
part in writeback accounting, but there are several easy ways to avoid
it.
Requiring interrupts disabled for shmlock_user_lock would be easy, but
it's a high-level global lock for which that seems inappropriate.
Instead, recall that the use of info->lock to guard info->flags in
shmem_lock() dates from pre-3.1 days, when races with SHMEM_PAGEIN and
SHMEM_TRUNCATE could occur: nowadays it serves no purpose, the only flag
added or removed is VM_LOCKED itself, and calls to shmem_lock() an inode
are already serialized by the caller.
Take info->lock out of the chain and the possibility of deadlock or
lockdep warning goes away.
Fixes: 4595ef88d136 ("shmem: make shmem_inode_info::lock irq-safe")
Reported-by: [email protected]
Reported-by: [email protected]
Signed-off-by: Hugh Dickins <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Acked-by: Yang Shi <[email protected]>
Cc: Yang Shi <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Link: https://lore.kernel.org/lkml/[email protected]/
Link: https://lore.kernel.org/lkml/[email protected]/
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
mm/shmem.c | 7 +++++--
1 file changed, 5 insertions(+), 2 deletions(-)
diff --git a/mm/shmem.c b/mm/shmem.c
index 90ccbb35458bd..31b0c09fe6c60 100644
--- a/mm/shmem.c
+++ b/mm/shmem.c
@@ -2082,7 +2082,11 @@ int shmem_lock(struct file *file, int lock, struct user_struct *user)
struct shmem_inode_info *info = SHMEM_I(inode);
int retval = -ENOMEM;
- spin_lock_irq(&info->lock);
+ /*
+ * What serializes the accesses to info->flags?
+ * ipc_lock_object() when called from shmctl_do_lock(),
+ * no serialization needed when called from shm_destroy().
+ */
if (lock && !(info->flags & VM_LOCKED)) {
if (!user_shm_lock(inode->i_size, user))
goto out_nomem;
@@ -2097,7 +2101,6 @@ int shmem_lock(struct file *file, int lock, struct user_struct *user)
retval = 0;
out_nomem:
- spin_unlock_irq(&info->lock);
return retval;
}
--
2.20.1
From: Arnd Bergmann <[email protected]>
[ Upstream commit dc30b4059f6e2abf3712ab537c8718562b21c45d ]
The current gcc-10 snapshot produces a false-positive warning:
net/core/drop_monitor.c: In function 'trace_drop_common.constprop':
cc1: error: writing 8 bytes into a region of size 0 [-Werror=stringop-overflow=]
In file included from net/core/drop_monitor.c:23:
include/uapi/linux/net_dropmon.h:36:8: note: at offset 0 to object 'entries' with size 4 declared here
36 | __u32 entries;
| ^~~~~~~
I reported this in the gcc bugzilla, but in case it does not get
fixed in the release, work around it by using a temporary variable.
Fixes: 9a8afc8d3962 ("Network Drop Monitor: Adding drop monitor implementation & Netlink protocol")
Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=94881
Signed-off-by: Arnd Bergmann <[email protected]>
Acked-by: Neil Horman <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/core/drop_monitor.c | 11 +++++++----
1 file changed, 7 insertions(+), 4 deletions(-)
diff --git a/net/core/drop_monitor.c b/net/core/drop_monitor.c
index ca2c9c8b9a3e9..6d7ff117f3792 100644
--- a/net/core/drop_monitor.c
+++ b/net/core/drop_monitor.c
@@ -159,6 +159,7 @@ static void sched_send_work(unsigned long _data)
static void trace_drop_common(struct sk_buff *skb, void *location)
{
struct net_dm_alert_msg *msg;
+ struct net_dm_drop_point *point;
struct nlmsghdr *nlh;
struct nlattr *nla;
int i;
@@ -177,11 +178,13 @@ static void trace_drop_common(struct sk_buff *skb, void *location)
nlh = (struct nlmsghdr *)dskb->data;
nla = genlmsg_data(nlmsg_data(nlh));
msg = nla_data(nla);
+ point = msg->points;
for (i = 0; i < msg->entries; i++) {
- if (!memcmp(&location, msg->points[i].pc, sizeof(void *))) {
- msg->points[i].count++;
+ if (!memcmp(&location, &point->pc, sizeof(void *))) {
+ point->count++;
goto out;
}
+ point++;
}
if (msg->entries == dm_hit_limit)
goto out;
@@ -190,8 +193,8 @@ static void trace_drop_common(struct sk_buff *skb, void *location)
*/
__nla_reserve_nohdr(dskb, sizeof(struct net_dm_drop_point));
nla->nla_len += NLA_ALIGN(sizeof(struct net_dm_drop_point));
- memcpy(msg->points[msg->entries].pc, &location, sizeof(void *));
- msg->points[msg->entries].count = 1;
+ memcpy(point->pc, &location, sizeof(void *));
+ point->count = 1;
msg->entries++;
if (!timer_pending(&data->send_timer)) {
--
2.20.1
From: Wu Bo <[email protected]>
commit 83c6f2390040f188cc25b270b4befeb5628c1aee upstream.
If the __copy_from_user function failed we need to call sg_remove_request
in sg_write.
Link: https://lore.kernel.org/r/[email protected]
Acked-by: Douglas Gilbert <[email protected]>
Signed-off-by: Wu Bo <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
[groeck: Backport to v5.4.y and older kernels]
Signed-off-by: Guenter Roeck <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/scsi/sg.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
--- a/drivers/scsi/sg.c
+++ b/drivers/scsi/sg.c
@@ -695,8 +695,10 @@ sg_write(struct file *filp, const char _
hp->flags = input_size; /* structure abuse ... */
hp->pack_id = old_hdr.pack_id;
hp->usr_ptr = NULL;
- if (__copy_from_user(cmnd, buf, cmd_size))
+ if (__copy_from_user(cmnd, buf, cmd_size)) {
+ sg_remove_request(sfp, srp);
return -EFAULT;
+ }
/*
* SG_DXFER_TO_FROM_DEV is functionally equivalent to SG_DXFER_FROM_DEV,
* but is is possible that the app intended SG_DXFER_TO_DEV, because there
From: Madhuparna Bhowmik <[email protected]>
[ Upstream commit 2e45676a4d33af47259fa186ea039122ce263ba9 ]
pd->dma.dev is read in irq handler pd_irq().
However, it is set to pdev->dev after request_irq().
Therefore, set pd->dma.dev to pdev->dev before request_irq() to
avoid data race between pch_dma_probe() and pd_irq().
Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: Madhuparna Bhowmik <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Vinod Koul <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/dma/pch_dma.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/dma/pch_dma.c b/drivers/dma/pch_dma.c
index df95727dc2fba..8a0c70e4f7277 100644
--- a/drivers/dma/pch_dma.c
+++ b/drivers/dma/pch_dma.c
@@ -876,6 +876,7 @@ static int pch_dma_probe(struct pci_dev *pdev,
}
pci_set_master(pdev);
+ pd->dma.dev = &pdev->dev;
err = request_irq(pdev->irq, pd_irq, IRQF_SHARED, DRV_NAME, pd);
if (err) {
@@ -891,7 +892,6 @@ static int pch_dma_probe(struct pci_dev *pdev,
goto err_free_irq;
}
- pd->dma.dev = &pdev->dev;
INIT_LIST_HEAD(&pd->dma.channels);
--
2.20.1
From: wuxu.wu <[email protected]>
commit 19b61392c5a852b4e8a0bf35aecb969983c5932d upstream.
dw_spi_irq() and dw_spi_transfer_one concurrent calls.
I find a panic in dw_writer(): txw = *(u8 *)(dws->tx), when dw->tx==null,
dw->len==4, and dw->tx_end==1.
When tpm driver's message overtime dw_spi_irq() and dw_spi_transfer_one
may concurrent visit dw_spi, so I think dw_spi structure lack of protection.
Otherwise dw_spi_transfer_one set dw rx/tx buffer and then open irq,
store dw rx/tx instructions and other cores handle irq load dw rx/tx
instructions may out of order.
[ 1025.321302] Call trace:
...
[ 1025.321319] __crash_kexec+0x98/0x148
[ 1025.321323] panic+0x17c/0x314
[ 1025.321329] die+0x29c/0x2e8
[ 1025.321334] die_kernel_fault+0x68/0x78
[ 1025.321337] __do_kernel_fault+0x90/0xb0
[ 1025.321346] do_page_fault+0x88/0x500
[ 1025.321347] do_translation_fault+0xa8/0xb8
[ 1025.321349] do_mem_abort+0x68/0x118
[ 1025.321351] el1_da+0x20/0x8c
[ 1025.321362] dw_writer+0xc8/0xd0
[ 1025.321364] interrupt_transfer+0x60/0x110
[ 1025.321365] dw_spi_irq+0x48/0x70
...
Signed-off-by: wuxu.wu <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Nobuhiro Iwamatsu (CIP) <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/spi/spi-dw.c | 15 ++++++++++++---
drivers/spi/spi-dw.h | 1 +
2 files changed, 13 insertions(+), 3 deletions(-)
--- a/drivers/spi/spi-dw.c
+++ b/drivers/spi/spi-dw.c
@@ -180,9 +180,11 @@ static inline u32 rx_max(struct dw_spi *
static void dw_writer(struct dw_spi *dws)
{
- u32 max = tx_max(dws);
+ u32 max;
u16 txw = 0;
+ spin_lock(&dws->buf_lock);
+ max = tx_max(dws);
while (max--) {
/* Set the tx word if the transfer's original "tx" is not null */
if (dws->tx_end - dws->len) {
@@ -194,13 +196,16 @@ static void dw_writer(struct dw_spi *dws
dw_write_io_reg(dws, DW_SPI_DR, txw);
dws->tx += dws->n_bytes;
}
+ spin_unlock(&dws->buf_lock);
}
static void dw_reader(struct dw_spi *dws)
{
- u32 max = rx_max(dws);
+ u32 max;
u16 rxw;
+ spin_lock(&dws->buf_lock);
+ max = rx_max(dws);
while (max--) {
rxw = dw_read_io_reg(dws, DW_SPI_DR);
/* Care rx only if the transfer's original "rx" is not null */
@@ -212,6 +217,7 @@ static void dw_reader(struct dw_spi *dws
}
dws->rx += dws->n_bytes;
}
+ spin_unlock(&dws->buf_lock);
}
static void int_error_stop(struct dw_spi *dws, const char *msg)
@@ -284,18 +290,20 @@ static int dw_spi_transfer_one(struct sp
{
struct dw_spi *dws = spi_master_get_devdata(master);
struct chip_data *chip = spi_get_ctldata(spi);
+ unsigned long flags;
u8 imask = 0;
u16 txlevel = 0;
u32 cr0;
int ret;
dws->dma_mapped = 0;
-
+ spin_lock_irqsave(&dws->buf_lock, flags);
dws->tx = (void *)transfer->tx_buf;
dws->tx_end = dws->tx + transfer->len;
dws->rx = transfer->rx_buf;
dws->rx_end = dws->rx + transfer->len;
dws->len = transfer->len;
+ spin_unlock_irqrestore(&dws->buf_lock, flags);
spi_enable_chip(dws, 0);
@@ -487,6 +495,7 @@ int dw_spi_add_host(struct device *dev,
dws->dma_inited = 0;
dws->dma_addr = (dma_addr_t)(dws->paddr + DW_SPI_DR);
snprintf(dws->name, sizeof(dws->name), "dw_spi%d", dws->bus_num);
+ spin_lock_init(&dws->buf_lock);
ret = request_irq(dws->irq, dw_spi_irq, IRQF_SHARED, dws->name, master);
if (ret < 0) {
--- a/drivers/spi/spi-dw.h
+++ b/drivers/spi/spi-dw.h
@@ -117,6 +117,7 @@ struct dw_spi {
size_t len;
void *tx;
void *tx_end;
+ spinlock_t buf_lock;
void *rx;
void *rx_end;
int dma_mapped;
From: Kees Cook <[email protected]>
commit 7be3cb019db1cbd5fd5ffe6d64a23fefa4b6f229 upstream.
When brk was moved for binaries without an interpreter, it should have
been limited to ET_DYN only. In other words, the special case was an
ET_DYN that lacks an INTERP, not just an executable that lacks INTERP.
The bug manifested for giant static executables, where the brk would end
up in the middle of the text area on 32-bit architectures.
Reported-and-tested-by: Richard Kojedzinszky <[email protected]>
Fixes: bbdc6076d2e5 ("binfmt_elf: move brk out of mmap when doing direct loader exec")
Cc: [email protected]
Signed-off-by: Kees Cook <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Cc: Guenter Roeck <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/binfmt_elf.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/fs/binfmt_elf.c
+++ b/fs/binfmt_elf.c
@@ -1107,7 +1107,8 @@ static int load_elf_binary(struct linux_
* (since it grows up, and may collide early with the stack
* growing down), and into the unused ELF_ET_DYN_BASE region.
*/
- if (IS_ENABLED(CONFIG_ARCH_HAS_ELF_RANDOMIZE) && !interpreter)
+ if (IS_ENABLED(CONFIG_ARCH_HAS_ELF_RANDOMIZE) &&
+ loc->elf_ex.e_type == ET_DYN && !interpreter)
current->mm->brk = current->mm->start_brk =
ELF_ET_DYN_BASE;
From: Vasily Averin <[email protected]>
[ Upstream commit 5e698222c70257d13ae0816720dde57c56f81e15 ]
Commit 89163f93c6f9 ("ipc/util.c: sysvipc_find_ipc() should increase
position index") is causing this bug (seen on 5.6.8):
# ipcs -q
------ Message Queues --------
key msqid owner perms used-bytes messages
# ipcmk -Q
Message queue id: 0
# ipcs -q
------ Message Queues --------
key msqid owner perms used-bytes messages
0x82db8127 0 root 644 0 0
# ipcmk -Q
Message queue id: 1
# ipcs -q
------ Message Queues --------
key msqid owner perms used-bytes messages
0x82db8127 0 root 644 0 0
0x76d1fb2a 1 root 644 0 0
# ipcrm -q 0
# ipcs -q
------ Message Queues --------
key msqid owner perms used-bytes messages
0x76d1fb2a 1 root 644 0 0
0x76d1fb2a 1 root 644 0 0
# ipcmk -Q
Message queue id: 2
# ipcrm -q 2
# ipcs -q
------ Message Queues --------
key msqid owner perms used-bytes messages
0x76d1fb2a 1 root 644 0 0
0x76d1fb2a 1 root 644 0 0
# ipcmk -Q
Message queue id: 3
# ipcrm -q 1
# ipcs -q
------ Message Queues --------
key msqid owner perms used-bytes messages
0x7c982867 3 root 644 0 0
0x7c982867 3 root 644 0 0
0x7c982867 3 root 644 0 0
0x7c982867 3 root 644 0 0
Whenever an IPC item with a low id is deleted, the items with higher ids
are duplicated, as if filling a hole.
new_pos should jump through hole of unused ids, pos can be updated
inside "for" cycle.
Fixes: 89163f93c6f9 ("ipc/util.c: sysvipc_find_ipc() should increase position index")
Reported-by: Andreas Schwab <[email protected]>
Reported-by: Randy Dunlap <[email protected]>
Signed-off-by: Vasily Averin <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Acked-by: Waiman Long <[email protected]>
Cc: NeilBrown <[email protected]>
Cc: Steven Rostedt <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Peter Oberparleiter <[email protected]>
Cc: Davidlohr Bueso <[email protected]>
Cc: Manfred Spraul <[email protected]>
Cc: <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
ipc/util.c | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)
diff --git a/ipc/util.c b/ipc/util.c
index e65ecf3ccbdab..76d4afcde7bbb 100644
--- a/ipc/util.c
+++ b/ipc/util.c
@@ -751,21 +751,21 @@ static struct kern_ipc_perm *sysvipc_find_ipc(struct ipc_ids *ids, loff_t pos,
total++;
}
- *new_pos = pos + 1;
+ ipc = NULL;
if (total >= ids->in_use)
- return NULL;
+ goto out;
for (; pos < IPCMNI; pos++) {
ipc = idr_find(&ids->ipcs_idr, pos);
if (ipc != NULL) {
rcu_read_lock();
ipc_lock_object(ipc);
- return ipc;
+ break;
}
}
-
- /* Out of range - return NULL to terminate iteration */
- return NULL;
+out:
+ *new_pos = pos + 1;
+ return ipc;
}
static void *sysvipc_proc_next(struct seq_file *s, void *it, loff_t *pos)
--
2.20.1
From: Vasily Averin <[email protected]>
[ Upstream commit 5b5703dbafae74adfbe298a56a81694172caf5e6 ]
v2: removed TODO reminder
Signed-off-by: Vasily Averin <[email protected]>
Link: http://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Gerd Hoffmann <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/qxl/qxl_image.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/qxl/qxl_image.c b/drivers/gpu/drm/qxl/qxl_image.c
index 7fbcc35e8ad35..c89c10055641e 100644
--- a/drivers/gpu/drm/qxl/qxl_image.c
+++ b/drivers/gpu/drm/qxl/qxl_image.c
@@ -210,7 +210,8 @@ qxl_image_init_helper(struct qxl_device *qdev,
break;
default:
DRM_ERROR("unsupported image bit depth\n");
- return -EINVAL; /* TODO: cleanup */
+ qxl_bo_kunmap_atomic_page(qdev, image_bo, ptr);
+ return -EINVAL;
}
image->u.bitmap.flags = QXL_BITMAP_TOP_DOWN;
image->u.bitmap.x = width;
--
2.20.1
From: Eric Dumazet <[email protected]>
[ Upstream commit df4953e4e997e273501339f607b77953772e3559 ]
syzbot managed to set up sfq so that q->scaled_quantum was zero,
triggering an infinite loop in sfq_dequeue()
More generally, we must only accept quantum between 1 and 2^18 - 7,
meaning scaled_quantum must be in [1, 0x7FFF] range.
Otherwise, we also could have a loop in sfq_dequeue()
if scaled_quantum happens to be 0x8000, since slot->allot
could indefinitely switch between 0 and 0x8000.
Fixes: eeaeb068f139 ("sch_sfq: allow big packets and be fair")
Signed-off-by: Eric Dumazet <[email protected]>
Reported-by: [email protected]
Cc: Jason A. Donenfeld <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/sched/sch_sfq.c | 9 +++++++++
1 file changed, 9 insertions(+)
--- a/net/sched/sch_sfq.c
+++ b/net/sched/sch_sfq.c
@@ -635,6 +635,15 @@ static int sfq_change(struct Qdisc *sch,
if (ctl->divisor &&
(!is_power_of_2(ctl->divisor) || ctl->divisor > 65536))
return -EINVAL;
+
+ /* slot->allot is a short, make sure quantum is not too big. */
+ if (ctl->quantum) {
+ unsigned int scaled = SFQ_ALLOT_SIZE(ctl->quantum);
+
+ if (scaled <= 0 || scaled > SHRT_MAX)
+ return -EINVAL;
+ }
+
if (ctl_v1 && !red_check_params(ctl_v1->qth_min, ctl_v1->qth_max,
ctl_v1->Wlog))
return -EINVAL;
From: Arnd Bergmann <[email protected]>
[ Upstream commit 2c407aca64977ede9b9f35158e919773cae2082f ]
gcc-10 warns around a suspicious access to an empty struct member:
net/netfilter/nf_conntrack_core.c: In function '__nf_conntrack_alloc':
net/netfilter/nf_conntrack_core.c:1522:9: warning: array subscript 0 is outside the bounds of an interior zero-length array 'u8[0]' {aka 'unsigned char[0]'} [-Wzero-length-bounds]
1522 | memset(&ct->__nfct_init_offset[0], 0,
| ^~~~~~~~~~~~~~~~~~~~~~~~~~
In file included from net/netfilter/nf_conntrack_core.c:37:
include/net/netfilter/nf_conntrack.h:90:5: note: while referencing '__nfct_init_offset'
90 | u8 __nfct_init_offset[0];
| ^~~~~~~~~~~~~~~~~~
The code is correct but a bit unusual. Rework it slightly in a way that
does not trigger the warning, using an empty struct instead of an empty
array. There are probably more elegant ways to do this, but this is the
smallest change.
Fixes: c41884ce0562 ("netfilter: conntrack: avoid zeroing timer")
Signed-off-by: Arnd Bergmann <[email protected]>
Signed-off-by: Pablo Neira Ayuso <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
include/net/netfilter/nf_conntrack.h | 2 +-
net/netfilter/nf_conntrack_core.c | 4 ++--
2 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/include/net/netfilter/nf_conntrack.h b/include/net/netfilter/nf_conntrack.h
index b57a9f37c297b..7befec513295d 100644
--- a/include/net/netfilter/nf_conntrack.h
+++ b/include/net/netfilter/nf_conntrack.h
@@ -103,7 +103,7 @@ struct nf_conn {
struct hlist_node nat_bysource;
#endif
/* all members below initialized via memset */
- u8 __nfct_init_offset[0];
+ struct { } __nfct_init_offset;
/* If we were expected by an expectation, this will be it */
struct nf_conn *master;
diff --git a/net/netfilter/nf_conntrack_core.c b/net/netfilter/nf_conntrack_core.c
index 1bdae8f188e1f..d507d0fc7858a 100644
--- a/net/netfilter/nf_conntrack_core.c
+++ b/net/netfilter/nf_conntrack_core.c
@@ -1124,9 +1124,9 @@ __nf_conntrack_alloc(struct net *net,
*(unsigned long *)(&ct->tuplehash[IP_CT_DIR_REPLY].hnnode.pprev) = hash;
ct->status = 0;
write_pnet(&ct->ct_net, net);
- memset(&ct->__nfct_init_offset[0], 0,
+ memset(&ct->__nfct_init_offset, 0,
offsetof(struct nf_conn, proto) -
- offsetof(struct nf_conn, __nfct_init_offset[0]));
+ offsetof(struct nf_conn, __nfct_init_offset));
nf_ct_zone_add(ct, zone);
--
2.20.1
From: Linus Torvalds <[email protected]>
commit 9d82973e032e246ff5663c9805fbb5407ae932e3 upstream.
Due to a bug-report that was compiler-dependent, I updated one of my
machines to gcc-10. That shows a lot of new warnings. Happily they
seem to be mostly the valid kind, but it's going to cause a round of
churn for getting rid of them..
This is the really low-hanging fruit of removing a couple of zero-sized
arrays in some core code. We have had a round of these patches before,
and we'll have many more coming, and there is nothing special about
these except that they were particularly trivial, and triggered more
warnings than most.
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
include/linux/fs.h | 2 +-
include/linux/tty.h | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
--- a/include/linux/fs.h
+++ b/include/linux/fs.h
@@ -931,7 +931,7 @@ struct file_handle {
__u32 handle_bytes;
int handle_type;
/* file identifier */
- unsigned char f_handle[0];
+ unsigned char f_handle[];
};
static inline struct file *get_file(struct file *f)
--- a/include/linux/tty.h
+++ b/include/linux/tty.h
@@ -64,7 +64,7 @@ struct tty_buffer {
int read;
int flags;
/* Data points here */
- unsigned long data[0];
+ unsigned long data[];
};
/* Values for .flags field of tty_buffer */
From: Grace Kao <[email protected]>
[ Upstream commit 69388e15f5078c961b9e5319e22baea4c57deff1 ]
According to Braswell NDA Specification Update (#557593),
concurrent read accesses may result in returning 0xffffffff and write
instructions may be dropped. We have an established format for the
commit references, i.e.
cdca06e4e859 ("pinctrl: baytrail: Add missing spinlock usage in
byt_gpio_irq_handler")
Fixes: 0bd50d719b00 ("pinctrl: cherryview: prevent concurrent access to GPIO controllers")
Signed-off-by: Grace Kao <[email protected]>
Reported-by: Brian Norris <[email protected]>
Reviewed-by: Brian Norris <[email protected]>
Acked-by: Mika Westerberg <[email protected]>
Signed-off-by: Andy Shevchenko <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/pinctrl/intel/pinctrl-cherryview.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/drivers/pinctrl/intel/pinctrl-cherryview.c b/drivers/pinctrl/intel/pinctrl-cherryview.c
index e8c08eb975301..d1a99b2e2d4c3 100644
--- a/drivers/pinctrl/intel/pinctrl-cherryview.c
+++ b/drivers/pinctrl/intel/pinctrl-cherryview.c
@@ -1509,11 +1509,15 @@ static void chv_gpio_irq_handler(struct irq_desc *desc)
struct chv_pinctrl *pctrl = gpiochip_get_data(gc);
struct irq_chip *chip = irq_desc_get_chip(desc);
unsigned long pending;
+ unsigned long flags;
u32 intr_line;
chained_irq_enter(chip, desc);
+ raw_spin_lock_irqsave(&chv_lock, flags);
pending = readl(pctrl->regs + CHV_INTSTAT);
+ raw_spin_unlock_irqrestore(&chv_lock, flags);
+
for_each_set_bit(intr_line, &pending, pctrl->community->nirqs) {
unsigned irq, offset;
--
2.20.1
From: Linus Torvalds <[email protected]>
commit 78a5255ffb6a1af189a83e493d916ba1c54d8c75 upstream.
We have some rather random rules about when we accept the
"maybe-initialized" warnings, and when we don't.
For example, we consider it unreliable for gcc versions < 4.9, but also
if -O3 is enabled, or if optimizing for size. And then various kernel
config options disabled it, because they know that they trigger that
warning by confusing gcc sufficiently (ie PROFILE_ALL_BRANCHES).
And now gcc-10 seems to be introducing a lot of those warnings too, so
it falls under the same heading as 4.9 did.
At the same time, we have a very straightforward way to _enable_ that
warning when wanted: use "W=2" to enable more warnings.
So stop playing these ad-hoc games, and just disable that warning by
default, with the known and straight-forward "if you want to work on the
extra compiler warnings, use W=123".
Would it be great to have code that is always so obvious that it never
confuses the compiler whether a variable is used initialized or not?
Yes, it would. In a perfect world, the compilers would be smarter, and
our source code would be simpler.
That's currently not the world we live in, though.
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
Makefile | 7 +++----
init/Kconfig | 17 -----------------
kernel/trace/Kconfig | 1 -
3 files changed, 3 insertions(+), 22 deletions(-)
--- a/Makefile
+++ b/Makefile
@@ -663,10 +663,6 @@ else
KBUILD_CFLAGS += -O2
endif
-ifdef CONFIG_CC_DISABLE_WARN_MAYBE_UNINITIALIZED
-KBUILD_CFLAGS += -Wno-maybe-uninitialized
-endif
-
# Tell gcc to never replace conditional load with a non-conditional one
KBUILD_CFLAGS += $(call cc-option,--param=allow-store-data-races=0)
@@ -801,6 +797,9 @@ KBUILD_CFLAGS += $(call cc-disable-warni
# disable stringop warnings in gcc 8+
KBUILD_CFLAGS += $(call cc-disable-warning, stringop-truncation)
+# Enabled with W=2, disabled by default as noisy
+KBUILD_CFLAGS += $(call cc-disable-warning, maybe-uninitialized)
+
# disable invalid "can't wrap" optimizations for signed / pointers
KBUILD_CFLAGS += $(call cc-option,-fno-strict-overflow)
--- a/init/Kconfig
+++ b/init/Kconfig
@@ -16,22 +16,6 @@ config DEFCONFIG_LIST
default "$ARCH_DEFCONFIG"
default "arch/$ARCH/defconfig"
-config CC_HAS_WARN_MAYBE_UNINITIALIZED
- def_bool $(cc-option,-Wmaybe-uninitialized)
- help
- GCC >= 4.7 supports this option.
-
-config CC_DISABLE_WARN_MAYBE_UNINITIALIZED
- bool
- depends on CC_HAS_WARN_MAYBE_UNINITIALIZED
- default CC_IS_GCC && GCC_VERSION < 40900 # unreliable for GCC < 4.9
- help
- GCC's -Wmaybe-uninitialized is not reliable by definition.
- Lots of false positive warnings are produced in some cases.
-
- If this option is enabled, -Wno-maybe-uninitialzed is passed
- to the compiler to suppress maybe-uninitialized warnings.
-
config CONSTRUCTORS
bool
depends on !UML
@@ -1349,7 +1333,6 @@ config CC_OPTIMIZE_FOR_PERFORMANCE
config CC_OPTIMIZE_FOR_SIZE
bool "Optimize for size"
- imply CC_DISABLE_WARN_MAYBE_UNINITIALIZED # avoid false positives
help
Enabling this option will pass "-Os" instead of "-O2" to
your compiler resulting in a smaller kernel.
--- a/kernel/trace/Kconfig
+++ b/kernel/trace/Kconfig
@@ -342,7 +342,6 @@ config PROFILE_ANNOTATED_BRANCHES
config PROFILE_ALL_BRANCHES
bool "Profile all if conditionals"
select TRACE_BRANCH_PROFILING
- imply CC_DISABLE_WARN_MAYBE_UNINITIALIZED # avoid false positives
help
This tracer profiles all branch conditions. Every if ()
taken in the kernel is recorded whether it hit or miss.
From: Sabrina Dubroca <[email protected]>
commit 6c8991f41546c3c472503dff1ea9daaddf9331c2 upstream.
ipv6_stub uses the ip6_dst_lookup function to allow other modules to
perform IPv6 lookups. However, this function skips the XFRM layer
entirely.
All users of ipv6_stub->ip6_dst_lookup use ip_route_output_flow (via the
ip_route_output_key and ip_route_output helpers) for their IPv4 lookups,
which calls xfrm_lookup_route(). This patch fixes this inconsistent
behavior by switching the stub to ip6_dst_lookup_flow, which also calls
xfrm_lookup_route().
This requires some changes in all the callers, as these two functions
take different arguments and have different return types.
Fixes: 5f81bd2e5d80 ("ipv6: export a stub for IPv6 symbols used by vxlan")
Reported-by: Xiumei Mu <[email protected]>
Signed-off-by: Sabrina Dubroca <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
[bwh: Backported to 4.9:
- Drop changes in lwt_bpf.c and mlx5
- Initialise "dst" in drivers/infiniband/core/addr.c:addr_resolve()
to avoid introducing a spurious "may be used uninitialised" warning
- Adjust filename, context, indentation]
Signed-off-by: Ben Hutchings <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/infiniband/core/addr.c | 8 ++++----
drivers/infiniband/sw/rxe/rxe_net.c | 8 +++++---
drivers/net/geneve.c | 4 +++-
drivers/net/vxlan.c | 10 ++++------
include/net/addrconf.h | 6 ++++--
net/ipv6/addrconf_core.c | 11 ++++++-----
net/ipv6/af_inet6.c | 2 +-
net/mpls/af_mpls.c | 7 +++----
net/tipc/udp_media.c | 9 ++++++---
9 files changed, 36 insertions(+), 29 deletions(-)
diff --git a/drivers/infiniband/core/addr.c b/drivers/infiniband/core/addr.c
index f7d23c1081dc4..68eed45b86003 100644
--- a/drivers/infiniband/core/addr.c
+++ b/drivers/infiniband/core/addr.c
@@ -453,16 +453,15 @@ static int addr6_resolve(struct sockaddr_in6 *src_in,
struct flowi6 fl6;
struct dst_entry *dst;
struct rt6_info *rt;
- int ret;
memset(&fl6, 0, sizeof fl6);
fl6.daddr = dst_in->sin6_addr;
fl6.saddr = src_in->sin6_addr;
fl6.flowi6_oif = addr->bound_dev_if;
- ret = ipv6_stub->ipv6_dst_lookup(addr->net, NULL, &dst, &fl6);
- if (ret < 0)
- return ret;
+ dst = ipv6_stub->ipv6_dst_lookup_flow(addr->net, NULL, &fl6, NULL);
+ if (IS_ERR(dst))
+ return PTR_ERR(dst);
rt = (struct rt6_info *)dst;
if (ipv6_addr_any(&src_in->sin6_addr)) {
@@ -552,6 +551,7 @@ static int addr_resolve(struct sockaddr *src_in,
const struct sockaddr_in6 *dst_in6 =
(const struct sockaddr_in6 *)dst_in;
+ dst = NULL;
ret = addr6_resolve((struct sockaddr_in6 *)src_in,
dst_in6, addr,
&dst);
diff --git a/drivers/infiniband/sw/rxe/rxe_net.c b/drivers/infiniband/sw/rxe/rxe_net.c
index f4f3942ebbd13..d19e003e8381e 100644
--- a/drivers/infiniband/sw/rxe/rxe_net.c
+++ b/drivers/infiniband/sw/rxe/rxe_net.c
@@ -182,10 +182,12 @@ static struct dst_entry *rxe_find_route6(struct net_device *ndev,
memcpy(&fl6.daddr, daddr, sizeof(*daddr));
fl6.flowi6_proto = IPPROTO_UDP;
- if (unlikely(ipv6_stub->ipv6_dst_lookup(sock_net(recv_sockets.sk6->sk),
- recv_sockets.sk6->sk, &ndst, &fl6))) {
+ ndst = ipv6_stub->ipv6_dst_lookup_flow(sock_net(recv_sockets.sk6->sk),
+ recv_sockets.sk6->sk, &fl6,
+ NULL);
+ if (unlikely(IS_ERR(ndst))) {
pr_err_ratelimited("no route to %pI6\n", daddr);
- goto put;
+ return NULL;
}
if (unlikely(ndst->error)) {
diff --git a/drivers/net/geneve.c b/drivers/net/geneve.c
index 92ad43e53c722..35d8c636de123 100644
--- a/drivers/net/geneve.c
+++ b/drivers/net/geneve.c
@@ -835,7 +835,9 @@ static struct dst_entry *geneve_get_v6_dst(struct sk_buff *skb,
return dst;
}
- if (ipv6_stub->ipv6_dst_lookup(geneve->net, gs6->sock->sk, &dst, fl6)) {
+ dst = ipv6_stub->ipv6_dst_lookup_flow(geneve->net, gs6->sock->sk, fl6,
+ NULL);
+ if (IS_ERR(dst)) {
netdev_dbg(dev, "no route to %pI6\n", &fl6->daddr);
return ERR_PTR(-ENETUNREACH);
}
diff --git a/drivers/net/vxlan.c b/drivers/net/vxlan.c
index bc4542d9a08d3..58ddb6c904185 100644
--- a/drivers/net/vxlan.c
+++ b/drivers/net/vxlan.c
@@ -1881,7 +1881,6 @@ static struct dst_entry *vxlan6_get_route(struct vxlan_dev *vxlan,
bool use_cache = ip_tunnel_dst_cache_usable(skb, info);
struct dst_entry *ndst;
struct flowi6 fl6;
- int err;
if (!sock6)
return ERR_PTR(-EIO);
@@ -1902,11 +1901,10 @@ static struct dst_entry *vxlan6_get_route(struct vxlan_dev *vxlan,
fl6.flowi6_mark = skb->mark;
fl6.flowi6_proto = IPPROTO_UDP;
- err = ipv6_stub->ipv6_dst_lookup(vxlan->net,
- sock6->sock->sk,
- &ndst, &fl6);
- if (err < 0)
- return ERR_PTR(err);
+ ndst = ipv6_stub->ipv6_dst_lookup_flow(vxlan->net, sock6->sock->sk,
+ &fl6, NULL);
+ if (unlikely(IS_ERR(ndst)))
+ return ERR_PTR(-ENETUNREACH);
*saddr = fl6.saddr;
if (use_cache)
diff --git a/include/net/addrconf.h b/include/net/addrconf.h
index b8ee8a113e324..019b06c035a84 100644
--- a/include/net/addrconf.h
+++ b/include/net/addrconf.h
@@ -206,8 +206,10 @@ struct ipv6_stub {
const struct in6_addr *addr);
int (*ipv6_sock_mc_drop)(struct sock *sk, int ifindex,
const struct in6_addr *addr);
- int (*ipv6_dst_lookup)(struct net *net, struct sock *sk,
- struct dst_entry **dst, struct flowi6 *fl6);
+ struct dst_entry *(*ipv6_dst_lookup_flow)(struct net *net,
+ const struct sock *sk,
+ struct flowi6 *fl6,
+ const struct in6_addr *final_dst);
void (*udpv6_encap_enable)(void);
void (*ndisc_send_na)(struct net_device *dev, const struct in6_addr *daddr,
const struct in6_addr *solicited_addr,
diff --git a/net/ipv6/addrconf_core.c b/net/ipv6/addrconf_core.c
index bfa941fc11650..129324b36fb60 100644
--- a/net/ipv6/addrconf_core.c
+++ b/net/ipv6/addrconf_core.c
@@ -107,15 +107,16 @@ int inet6addr_notifier_call_chain(unsigned long val, void *v)
}
EXPORT_SYMBOL(inet6addr_notifier_call_chain);
-static int eafnosupport_ipv6_dst_lookup(struct net *net, struct sock *u1,
- struct dst_entry **u2,
- struct flowi6 *u3)
+static struct dst_entry *eafnosupport_ipv6_dst_lookup_flow(struct net *net,
+ const struct sock *sk,
+ struct flowi6 *fl6,
+ const struct in6_addr *final_dst)
{
- return -EAFNOSUPPORT;
+ return ERR_PTR(-EAFNOSUPPORT);
}
const struct ipv6_stub *ipv6_stub __read_mostly = &(struct ipv6_stub) {
- .ipv6_dst_lookup = eafnosupport_ipv6_dst_lookup,
+ .ipv6_dst_lookup_flow = eafnosupport_ipv6_dst_lookup_flow,
};
EXPORT_SYMBOL_GPL(ipv6_stub);
diff --git a/net/ipv6/af_inet6.c b/net/ipv6/af_inet6.c
index 2e91637c9d491..c6746aaf7fbfb 100644
--- a/net/ipv6/af_inet6.c
+++ b/net/ipv6/af_inet6.c
@@ -860,7 +860,7 @@ static struct pernet_operations inet6_net_ops = {
static const struct ipv6_stub ipv6_stub_impl = {
.ipv6_sock_mc_join = ipv6_sock_mc_join,
.ipv6_sock_mc_drop = ipv6_sock_mc_drop,
- .ipv6_dst_lookup = ip6_dst_lookup,
+ .ipv6_dst_lookup_flow = ip6_dst_lookup_flow,
.udpv6_encap_enable = udpv6_encap_enable,
.ndisc_send_na = ndisc_send_na,
.nd_tbl = &nd_tbl,
diff --git a/net/mpls/af_mpls.c b/net/mpls/af_mpls.c
index ffab94d61e1da..eab9c1d70856b 100644
--- a/net/mpls/af_mpls.c
+++ b/net/mpls/af_mpls.c
@@ -497,16 +497,15 @@ static struct net_device *inet6_fib_lookup_dev(struct net *net,
struct net_device *dev;
struct dst_entry *dst;
struct flowi6 fl6;
- int err;
if (!ipv6_stub)
return ERR_PTR(-EAFNOSUPPORT);
memset(&fl6, 0, sizeof(fl6));
memcpy(&fl6.daddr, addr, sizeof(struct in6_addr));
- err = ipv6_stub->ipv6_dst_lookup(net, NULL, &dst, &fl6);
- if (err)
- return ERR_PTR(err);
+ dst = ipv6_stub->ipv6_dst_lookup_flow(net, NULL, &fl6, NULL);
+ if (IS_ERR(dst))
+ return ERR_CAST(dst);
dev = dst->dev;
dev_hold(dev);
diff --git a/net/tipc/udp_media.c b/net/tipc/udp_media.c
index 05033ab05b8f3..c6ff3de1de37b 100644
--- a/net/tipc/udp_media.c
+++ b/net/tipc/udp_media.c
@@ -187,10 +187,13 @@ static int tipc_udp_xmit(struct net *net, struct sk_buff *skb,
.saddr = src->ipv6,
.flowi6_proto = IPPROTO_UDP
};
- err = ipv6_stub->ipv6_dst_lookup(net, ub->ubsock->sk, &ndst,
- &fl6);
- if (err)
+ ndst = ipv6_stub->ipv6_dst_lookup_flow(net,
+ ub->ubsock->sk,
+ &fl6, NULL);
+ if (IS_ERR(ndst)) {
+ err = PTR_ERR(ndst);
goto tx_error;
+ }
ttl = ip6_dst_hoplimit(ndst);
err = udp_tunnel6_xmit_skb(ndst, ub->ubsock->sk, skb, NULL,
&src->ipv6, &dst->ipv6, 0, ttl, 0,
--
2.20.1
From: Sabrina Dubroca <[email protected]>
commit c4e85f73afb6384123e5ef1bba3315b2e3ad031e upstream.
This will be used in the conversion of ipv6_stub to ip6_dst_lookup_flow,
as some modules currently pass a net argument without a socket to
ip6_dst_lookup. This is equivalent to commit 343d60aada5a ("ipv6: change
ipv6_stub_impl.ipv6_dst_lookup to take net argument").
Signed-off-by: Sabrina Dubroca <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
[bwh: Backported to 4.9: adjust context]
Signed-off-by: Ben Hutchings <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
include/net/ipv6.h | 2 +-
net/dccp/ipv6.c | 6 +++---
net/ipv6/af_inet6.c | 2 +-
net/ipv6/datagram.c | 2 +-
net/ipv6/inet6_connection_sock.c | 4 ++--
net/ipv6/ip6_output.c | 8 ++++----
net/ipv6/raw.c | 2 +-
net/ipv6/syncookies.c | 2 +-
net/ipv6/tcp_ipv6.c | 4 ++--
net/l2tp/l2tp_ip6.c | 2 +-
net/sctp/ipv6.c | 4 ++--
11 files changed, 19 insertions(+), 19 deletions(-)
diff --git a/include/net/ipv6.h b/include/net/ipv6.h
index 168009eef5e42..1a48e10ec617d 100644
--- a/include/net/ipv6.h
+++ b/include/net/ipv6.h
@@ -856,7 +856,7 @@ static inline struct sk_buff *ip6_finish_skb(struct sock *sk)
int ip6_dst_lookup(struct net *net, struct sock *sk, struct dst_entry **dst,
struct flowi6 *fl6);
-struct dst_entry *ip6_dst_lookup_flow(const struct sock *sk, struct flowi6 *fl6,
+struct dst_entry *ip6_dst_lookup_flow(struct net *net, const struct sock *sk, struct flowi6 *fl6,
const struct in6_addr *final_dst);
struct dst_entry *ip6_sk_dst_lookup_flow(struct sock *sk, struct flowi6 *fl6,
const struct in6_addr *final_dst);
diff --git a/net/dccp/ipv6.c b/net/dccp/ipv6.c
index 87c513b5ff2eb..9438873fc3c87 100644
--- a/net/dccp/ipv6.c
+++ b/net/dccp/ipv6.c
@@ -209,7 +209,7 @@ static int dccp_v6_send_response(const struct sock *sk, struct request_sock *req
final_p = fl6_update_dst(&fl6, rcu_dereference(np->opt), &final);
rcu_read_unlock();
- dst = ip6_dst_lookup_flow(sk, &fl6, final_p);
+ dst = ip6_dst_lookup_flow(sock_net(sk), sk, &fl6, final_p);
if (IS_ERR(dst)) {
err = PTR_ERR(dst);
dst = NULL;
@@ -280,7 +280,7 @@ static void dccp_v6_ctl_send_reset(const struct sock *sk, struct sk_buff *rxskb)
security_skb_classify_flow(rxskb, flowi6_to_flowi(&fl6));
/* sk = NULL, but it is safe for now. RST socket required. */
- dst = ip6_dst_lookup_flow(ctl_sk, &fl6, NULL);
+ dst = ip6_dst_lookup_flow(sock_net(ctl_sk), ctl_sk, &fl6, NULL);
if (!IS_ERR(dst)) {
skb_dst_set(skb, dst);
ip6_xmit(ctl_sk, skb, &fl6, 0, NULL, 0);
@@ -889,7 +889,7 @@ static int dccp_v6_connect(struct sock *sk, struct sockaddr *uaddr,
opt = rcu_dereference_protected(np->opt, lockdep_sock_is_held(sk));
final_p = fl6_update_dst(&fl6, opt, &final);
- dst = ip6_dst_lookup_flow(sk, &fl6, final_p);
+ dst = ip6_dst_lookup_flow(sock_net(sk), sk, &fl6, final_p);
if (IS_ERR(dst)) {
err = PTR_ERR(dst);
goto failure;
diff --git a/net/ipv6/af_inet6.c b/net/ipv6/af_inet6.c
index 8885dbad217b1..2e91637c9d491 100644
--- a/net/ipv6/af_inet6.c
+++ b/net/ipv6/af_inet6.c
@@ -702,7 +702,7 @@ int inet6_sk_rebuild_header(struct sock *sk)
&final);
rcu_read_unlock();
- dst = ip6_dst_lookup_flow(sk, &fl6, final_p);
+ dst = ip6_dst_lookup_flow(sock_net(sk), sk, &fl6, final_p);
if (IS_ERR(dst)) {
sk->sk_route_caps = 0;
sk->sk_err_soft = -PTR_ERR(dst);
diff --git a/net/ipv6/datagram.c b/net/ipv6/datagram.c
index 956af11e9ba3e..58929622de0ea 100644
--- a/net/ipv6/datagram.c
+++ b/net/ipv6/datagram.c
@@ -87,7 +87,7 @@ int ip6_datagram_dst_update(struct sock *sk, bool fix_sk_saddr)
final_p = fl6_update_dst(&fl6, opt, &final);
rcu_read_unlock();
- dst = ip6_dst_lookup_flow(sk, &fl6, final_p);
+ dst = ip6_dst_lookup_flow(sock_net(sk), sk, &fl6, final_p);
if (IS_ERR(dst)) {
err = PTR_ERR(dst);
goto out;
diff --git a/net/ipv6/inet6_connection_sock.c b/net/ipv6/inet6_connection_sock.c
index 798a0950e9a62..b760ccec44d3c 100644
--- a/net/ipv6/inet6_connection_sock.c
+++ b/net/ipv6/inet6_connection_sock.c
@@ -90,7 +90,7 @@ struct dst_entry *inet6_csk_route_req(const struct sock *sk,
fl6->fl6_sport = htons(ireq->ir_num);
security_req_classify_flow(req, flowi6_to_flowi(fl6));
- dst = ip6_dst_lookup_flow(sk, fl6, final_p);
+ dst = ip6_dst_lookup_flow(sock_net(sk), sk, fl6, final_p);
if (IS_ERR(dst))
return NULL;
@@ -144,7 +144,7 @@ static struct dst_entry *inet6_csk_route_socket(struct sock *sk,
dst = __inet6_csk_dst_check(sk, np->dst_cookie);
if (!dst) {
- dst = ip6_dst_lookup_flow(sk, fl6, final_p);
+ dst = ip6_dst_lookup_flow(sock_net(sk), sk, fl6, final_p);
if (!IS_ERR(dst))
ip6_dst_store(sk, dst, NULL, NULL);
diff --git a/net/ipv6/ip6_output.c b/net/ipv6/ip6_output.c
index 11407dd6bc7c0..d93a98dfe52df 100644
--- a/net/ipv6/ip6_output.c
+++ b/net/ipv6/ip6_output.c
@@ -1075,19 +1075,19 @@ EXPORT_SYMBOL_GPL(ip6_dst_lookup);
* It returns a valid dst pointer on success, or a pointer encoded
* error code.
*/
-struct dst_entry *ip6_dst_lookup_flow(const struct sock *sk, struct flowi6 *fl6,
+struct dst_entry *ip6_dst_lookup_flow(struct net *net, const struct sock *sk, struct flowi6 *fl6,
const struct in6_addr *final_dst)
{
struct dst_entry *dst = NULL;
int err;
- err = ip6_dst_lookup_tail(sock_net(sk), sk, &dst, fl6);
+ err = ip6_dst_lookup_tail(net, sk, &dst, fl6);
if (err)
return ERR_PTR(err);
if (final_dst)
fl6->daddr = *final_dst;
- return xfrm_lookup_route(sock_net(sk), dst, flowi6_to_flowi(fl6), sk, 0);
+ return xfrm_lookup_route(net, dst, flowi6_to_flowi(fl6), sk, 0);
}
EXPORT_SYMBOL_GPL(ip6_dst_lookup_flow);
@@ -1112,7 +1112,7 @@ struct dst_entry *ip6_sk_dst_lookup_flow(struct sock *sk, struct flowi6 *fl6,
dst = ip6_sk_dst_check(sk, dst, fl6);
if (!dst)
- dst = ip6_dst_lookup_flow(sk, fl6, final_dst);
+ dst = ip6_dst_lookup_flow(sock_net(sk), sk, fl6, final_dst);
return dst;
}
diff --git a/net/ipv6/raw.c b/net/ipv6/raw.c
index 301978df650e6..47acd20d4e1fc 100644
--- a/net/ipv6/raw.c
+++ b/net/ipv6/raw.c
@@ -920,7 +920,7 @@ static int rawv6_sendmsg(struct sock *sk, struct msghdr *msg, size_t len)
fl6.flowlabel = ip6_make_flowinfo(ipc6.tclass, fl6.flowlabel);
- dst = ip6_dst_lookup_flow(sk, &fl6, final_p);
+ dst = ip6_dst_lookup_flow(sock_net(sk), sk, &fl6, final_p);
if (IS_ERR(dst)) {
err = PTR_ERR(dst);
goto out;
diff --git a/net/ipv6/syncookies.c b/net/ipv6/syncookies.c
index 7a86433d8896b..4834015b27f49 100644
--- a/net/ipv6/syncookies.c
+++ b/net/ipv6/syncookies.c
@@ -230,7 +230,7 @@ struct sock *cookie_v6_check(struct sock *sk, struct sk_buff *skb)
fl6.fl6_sport = inet_sk(sk)->inet_sport;
security_req_classify_flow(req, flowi6_to_flowi(&fl6));
- dst = ip6_dst_lookup_flow(sk, &fl6, final_p);
+ dst = ip6_dst_lookup_flow(sock_net(sk), sk, &fl6, final_p);
if (IS_ERR(dst))
goto out_free;
}
diff --git a/net/ipv6/tcp_ipv6.c b/net/ipv6/tcp_ipv6.c
index 4953466cf98f0..7b336b7803ffa 100644
--- a/net/ipv6/tcp_ipv6.c
+++ b/net/ipv6/tcp_ipv6.c
@@ -244,7 +244,7 @@ static int tcp_v6_connect(struct sock *sk, struct sockaddr *uaddr,
security_sk_classify_flow(sk, flowi6_to_flowi(&fl6));
- dst = ip6_dst_lookup_flow(sk, &fl6, final_p);
+ dst = ip6_dst_lookup_flow(sock_net(sk), sk, &fl6, final_p);
if (IS_ERR(dst)) {
err = PTR_ERR(dst);
goto failure;
@@ -841,7 +841,7 @@ static void tcp_v6_send_response(const struct sock *sk, struct sk_buff *skb, u32
* Underlying function will use this to retrieve the network
* namespace
*/
- dst = ip6_dst_lookup_flow(ctl_sk, &fl6, NULL);
+ dst = ip6_dst_lookup_flow(sock_net(ctl_sk), ctl_sk, &fl6, NULL);
if (!IS_ERR(dst)) {
skb_dst_set(buff, dst);
ip6_xmit(ctl_sk, buff, &fl6, fl6.flowi6_mark, NULL, tclass);
diff --git a/net/l2tp/l2tp_ip6.c b/net/l2tp/l2tp_ip6.c
index 423cb095ad37c..28274f397c55e 100644
--- a/net/l2tp/l2tp_ip6.c
+++ b/net/l2tp/l2tp_ip6.c
@@ -620,7 +620,7 @@ static int l2tp_ip6_sendmsg(struct sock *sk, struct msghdr *msg, size_t len)
fl6.flowlabel = ip6_make_flowinfo(ipc6.tclass, fl6.flowlabel);
- dst = ip6_dst_lookup_flow(sk, &fl6, final_p);
+ dst = ip6_dst_lookup_flow(sock_net(sk), sk, &fl6, final_p);
if (IS_ERR(dst)) {
err = PTR_ERR(dst);
goto out;
diff --git a/net/sctp/ipv6.c b/net/sctp/ipv6.c
index 34ab7f92f0643..50bc8c4ca9068 100644
--- a/net/sctp/ipv6.c
+++ b/net/sctp/ipv6.c
@@ -269,7 +269,7 @@ static void sctp_v6_get_dst(struct sctp_transport *t, union sctp_addr *saddr,
final_p = fl6_update_dst(fl6, rcu_dereference(np->opt), &final);
rcu_read_unlock();
- dst = ip6_dst_lookup_flow(sk, fl6, final_p);
+ dst = ip6_dst_lookup_flow(sock_net(sk), sk, fl6, final_p);
if (!asoc || saddr) {
t->dst = dst;
memcpy(fl, &_fl, sizeof(_fl));
@@ -327,7 +327,7 @@ static void sctp_v6_get_dst(struct sctp_transport *t, union sctp_addr *saddr,
fl6->saddr = laddr->a.v6.sin6_addr;
fl6->fl6_sport = laddr->a.v6.sin6_port;
final_p = fl6_update_dst(fl6, rcu_dereference(np->opt), &final);
- bdst = ip6_dst_lookup_flow(sk, fl6, final_p);
+ bdst = ip6_dst_lookup_flow(sock_net(sk), sk, fl6, final_p);
if (IS_ERR(bdst))
continue;
--
2.20.1
From: Oliver Neukum <[email protected]>
commit 9f04db234af691007bb785342a06abab5fb34474 upstream.
This device needs US_FL_NO_REPORT_OPCODES to avoid going
through prolonged error handling on enumeration.
Signed-off-by: Oliver Neukum <[email protected]>
Reported-by: Julian Groß <[email protected]>
Cc: stable <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/storage/unusual_uas.h | 7 +++++++
1 file changed, 7 insertions(+)
--- a/drivers/usb/storage/unusual_uas.h
+++ b/drivers/usb/storage/unusual_uas.h
@@ -41,6 +41,13 @@
* and don't forget to CC: the USB development list <[email protected]>
*/
+/* Reported-by: Julian Groß <[email protected]> */
+UNUSUAL_DEV(0x059f, 0x105f, 0x0000, 0x9999,
+ "LaCie",
+ "2Big Quadra USB3",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+ US_FL_NO_REPORT_OPCODES),
+
/*
* Apricorn USB3 dongle sometimes returns "USBSUSBSUSBS" in response to SCSI
* commands in UAS mode. Observed with the 1.28 firmware; are there others?
From: Jens Axboe <[email protected]>
commit 1f2cac107c591c24b60b115d6050adc213d10fc0 upstream.
sg.c calls into the blktrace functions without holding the proper queue
mutex for doing setup, start/stop, or teardown.
Add internal unlocked variants, and export the ones that do the proper
locking.
Fixes: 6da127ad0918 ("blktrace: Add blktrace ioctls to SCSI generic devices")
Tested-by: Dmitry Vyukov <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
Signed-off-by: Ben Hutchings <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
kernel/trace/blktrace.c | 58 ++++++++++++++++++++++++++++++++++-------
1 file changed, 48 insertions(+), 10 deletions(-)
diff --git a/kernel/trace/blktrace.c b/kernel/trace/blktrace.c
index ff1384c5884c5..55337d797deb1 100644
--- a/kernel/trace/blktrace.c
+++ b/kernel/trace/blktrace.c
@@ -329,7 +329,7 @@ static void blk_trace_cleanup(struct blk_trace *bt)
put_probe_ref();
}
-int blk_trace_remove(struct request_queue *q)
+static int __blk_trace_remove(struct request_queue *q)
{
struct blk_trace *bt;
@@ -342,6 +342,17 @@ int blk_trace_remove(struct request_queue *q)
return 0;
}
+
+int blk_trace_remove(struct request_queue *q)
+{
+ int ret;
+
+ mutex_lock(&q->blk_trace_mutex);
+ ret = __blk_trace_remove(q);
+ mutex_unlock(&q->blk_trace_mutex);
+
+ return ret;
+}
EXPORT_SYMBOL_GPL(blk_trace_remove);
static ssize_t blk_dropped_read(struct file *filp, char __user *buffer,
@@ -546,9 +557,8 @@ err:
return ret;
}
-int blk_trace_setup(struct request_queue *q, char *name, dev_t dev,
- struct block_device *bdev,
- char __user *arg)
+static int __blk_trace_setup(struct request_queue *q, char *name, dev_t dev,
+ struct block_device *bdev, char __user *arg)
{
struct blk_user_trace_setup buts;
int ret;
@@ -567,6 +577,19 @@ int blk_trace_setup(struct request_queue *q, char *name, dev_t dev,
}
return 0;
}
+
+int blk_trace_setup(struct request_queue *q, char *name, dev_t dev,
+ struct block_device *bdev,
+ char __user *arg)
+{
+ int ret;
+
+ mutex_lock(&q->blk_trace_mutex);
+ ret = __blk_trace_setup(q, name, dev, bdev, arg);
+ mutex_unlock(&q->blk_trace_mutex);
+
+ return ret;
+}
EXPORT_SYMBOL_GPL(blk_trace_setup);
#if defined(CONFIG_COMPAT) && defined(CONFIG_X86_64)
@@ -603,7 +626,7 @@ static int compat_blk_trace_setup(struct request_queue *q, char *name,
}
#endif
-int blk_trace_startstop(struct request_queue *q, int start)
+static int __blk_trace_startstop(struct request_queue *q, int start)
{
int ret;
struct blk_trace *bt = q->blk_trace;
@@ -642,6 +665,17 @@ int blk_trace_startstop(struct request_queue *q, int start)
return ret;
}
+
+int blk_trace_startstop(struct request_queue *q, int start)
+{
+ int ret;
+
+ mutex_lock(&q->blk_trace_mutex);
+ ret = __blk_trace_startstop(q, start);
+ mutex_unlock(&q->blk_trace_mutex);
+
+ return ret;
+}
EXPORT_SYMBOL_GPL(blk_trace_startstop);
/*
@@ -672,7 +706,7 @@ int blk_trace_ioctl(struct block_device *bdev, unsigned cmd, char __user *arg)
switch (cmd) {
case BLKTRACESETUP:
bdevname(bdev, b);
- ret = blk_trace_setup(q, b, bdev->bd_dev, bdev, arg);
+ ret = __blk_trace_setup(q, b, bdev->bd_dev, bdev, arg);
break;
#if defined(CONFIG_COMPAT) && defined(CONFIG_X86_64)
case BLKTRACESETUP32:
@@ -683,10 +717,10 @@ int blk_trace_ioctl(struct block_device *bdev, unsigned cmd, char __user *arg)
case BLKTRACESTART:
start = 1;
case BLKTRACESTOP:
- ret = blk_trace_startstop(q, start);
+ ret = __blk_trace_startstop(q, start);
break;
case BLKTRACETEARDOWN:
- ret = blk_trace_remove(q);
+ ret = __blk_trace_remove(q);
break;
default:
ret = -ENOTTY;
@@ -704,10 +738,14 @@ int blk_trace_ioctl(struct block_device *bdev, unsigned cmd, char __user *arg)
**/
void blk_trace_shutdown(struct request_queue *q)
{
+ mutex_lock(&q->blk_trace_mutex);
+
if (q->blk_trace) {
- blk_trace_startstop(q, 0);
- blk_trace_remove(q);
+ __blk_trace_startstop(q, 0);
+ __blk_trace_remove(q);
}
+
+ mutex_unlock(&q->blk_trace_mutex);
}
/*
--
2.20.1
From: Oliver Neukum <[email protected]>
commit e9b3c610a05c1cdf8e959a6d89c38807ff758ee6 upstream.
We must not process packets shorter than a packet ID
Signed-off-by: Oliver Neukum <[email protected]>
Reported-and-tested-by: [email protected]
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Cc: stable <[email protected]>
Signed-off-by: Johan Hovold <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/serial/garmin_gps.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/drivers/usb/serial/garmin_gps.c
+++ b/drivers/usb/serial/garmin_gps.c
@@ -1161,8 +1161,8 @@ static void garmin_read_process(struct g
send it directly to the tty port */
if (garmin_data_p->flags & FLAGS_QUEUING) {
pkt_add(garmin_data_p, data, data_length);
- } else if (bulk_data ||
- getLayerId(data) == GARMIN_LAYERID_APPL) {
+ } else if (bulk_data || (data_length >= sizeof(u32) &&
+ getLayerId(data) == GARMIN_LAYERID_APPL)) {
spin_lock_irqsave(&garmin_data_p->lock, flags);
garmin_data_p->flags |= APP_RESP_SEEN;
From: Matt Jolly <[email protected]>
[ Upstream commit 57c7f2bd758eed867295c81d3527fff4fab1ed74 ]
Add support for Dell Wireless 5816e to drivers/net/usb/qmi_wwan.c
Signed-off-by: Matt Jolly <[email protected]>
Acked-by: Bjørn Mork <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/usb/qmi_wwan.c | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/net/usb/qmi_wwan.c
+++ b/drivers/net/usb/qmi_wwan.c
@@ -950,6 +950,7 @@ static const struct usb_device_id produc
{QMI_FIXED_INTF(0x413c, 0x81b3, 8)}, /* Dell Wireless 5809e Gobi(TM) 4G LTE Mobile Broadband Card (rev3) */
{QMI_FIXED_INTF(0x413c, 0x81b6, 8)}, /* Dell Wireless 5811e */
{QMI_FIXED_INTF(0x413c, 0x81b6, 10)}, /* Dell Wireless 5811e */
+ {QMI_FIXED_INTF(0x413c, 0x81cc, 8)}, /* Dell Wireless 5816e */
{QMI_FIXED_INTF(0x413c, 0x81d7, 0)}, /* Dell Wireless 5821e */
{QMI_FIXED_INTF(0x413c, 0x81d7, 1)}, /* Dell Wireless 5821e preproduction config */
{QMI_FIXED_INTF(0x413c, 0x81e0, 0)}, /* Dell Wireless 5821e with eSIM support*/
From: Takashi Iwai <[email protected]>
commit 5a7b44a8df822e0667fc76ed7130252523993bda upstream.
syzbot reported the uninitialized value exposure in certain situations
using virmidi loop. It's likely a very small race at writing and
reading, and the influence is almost negligible. But it's safer to
paper over this just by replacing the existing kvmalloc() with
kvzalloc().
Reported-by: [email protected]
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
sound/core/rawmidi.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/sound/core/rawmidi.c
+++ b/sound/core/rawmidi.c
@@ -125,7 +125,7 @@ static int snd_rawmidi_runtime_create(st
runtime->avail = 0;
else
runtime->avail = runtime->buffer_size;
- if ((runtime->buffer = kmalloc(runtime->buffer_size, GFP_KERNEL)) == NULL) {
+ if ((runtime->buffer = kzalloc(runtime->buffer_size, GFP_KERNEL)) == NULL) {
kfree(runtime);
return -ENOMEM;
}
@@ -650,7 +650,7 @@ int snd_rawmidi_output_params(struct snd
return -EINVAL;
}
if (params->buffer_size != runtime->buffer_size) {
- newbuf = kmalloc(params->buffer_size, GFP_KERNEL);
+ newbuf = kzalloc(params->buffer_size, GFP_KERNEL);
if (!newbuf)
return -ENOMEM;
spin_lock_irq(&runtime->lock);
From: Kyungtae Kim <[email protected]>
commit 15753588bcd4bbffae1cca33c8ced5722477fe1f upstream.
FuzzUSB (a variant of syzkaller) found an illegal array access
using an incorrect index while binding a gadget with UDC.
Reference: https://www.spinics.net/lists/linux-usb/msg194331.html
This bug occurs when a size variable used for a buffer
is misused to access its strcpy-ed buffer.
Given a buffer along with its size variable (taken from user input),
from which, a new buffer is created using kstrdup().
Due to the original buffer containing 0 value in the middle,
the size of the kstrdup-ed buffer becomes smaller than that of the original.
So accessing the kstrdup-ed buffer with the same size variable
triggers memory access violation.
The fix makes sure no zero value in the buffer,
by comparing the strlen() of the orignal buffer with the size variable,
so that the access to the kstrdup-ed buffer is safe.
BUG: KASAN: slab-out-of-bounds in gadget_dev_desc_UDC_store+0x1ba/0x200
drivers/usb/gadget/configfs.c:266
Read of size 1 at addr ffff88806a55dd7e by task syz-executor.0/17208
CPU: 2 PID: 17208 Comm: syz-executor.0 Not tainted 5.6.8 #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0xce/0x128 lib/dump_stack.c:118
print_address_description.constprop.4+0x21/0x3c0 mm/kasan/report.c:374
__kasan_report+0x131/0x1b0 mm/kasan/report.c:506
kasan_report+0x12/0x20 mm/kasan/common.c:641
__asan_report_load1_noabort+0x14/0x20 mm/kasan/generic_report.c:132
gadget_dev_desc_UDC_store+0x1ba/0x200 drivers/usb/gadget/configfs.c:266
flush_write_buffer fs/configfs/file.c:251 [inline]
configfs_write_file+0x2f1/0x4c0 fs/configfs/file.c:283
__vfs_write+0x85/0x110 fs/read_write.c:494
vfs_write+0x1cd/0x510 fs/read_write.c:558
ksys_write+0x18a/0x220 fs/read_write.c:611
__do_sys_write fs/read_write.c:623 [inline]
__se_sys_write fs/read_write.c:620 [inline]
__x64_sys_write+0x73/0xb0 fs/read_write.c:620
do_syscall_64+0x9e/0x510 arch/x86/entry/common.c:294
entry_SYSCALL_64_after_hwframe+0x49/0xbe
Signed-off-by: Kyungtae Kim <[email protected]>
Reported-and-tested-by: Kyungtae Kim <[email protected]>
Cc: Felipe Balbi <[email protected]>
Cc: stable <[email protected]>
Link: https://lore.kernel.org/r/20200510054326.GA19198@pizza01
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/gadget/configfs.c | 3 +++
1 file changed, 3 insertions(+)
--- a/drivers/usb/gadget/configfs.c
+++ b/drivers/usb/gadget/configfs.c
@@ -259,6 +259,9 @@ static ssize_t gadget_dev_desc_UDC_store
char *name;
int ret;
+ if (strlen(page) < len)
+ return -EOVERFLOW;
+
name = kstrdup(page, GFP_KERNEL);
if (!name)
return -ENOMEM;
From: Christophe JAILLET <[email protected]>
commit ccaef7e6e354fb65758eaddd3eae8065a8b3e295 upstream.
'dev' is allocated in 'net2272_probe_init()'. It must be freed in the error
handling path, as already done in the remove function (i.e.
'net2272_plat_remove()')
Fixes: 90fccb529d24 ("usb: gadget: Gadget directory cleanup - group UDC drivers")
Signed-off-by: Christophe JAILLET <[email protected]>
Signed-off-by: Felipe Balbi <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/gadget/udc/net2272.c | 2 ++
1 file changed, 2 insertions(+)
--- a/drivers/usb/gadget/udc/net2272.c
+++ b/drivers/usb/gadget/udc/net2272.c
@@ -2666,6 +2666,8 @@ net2272_plat_probe(struct platform_devic
err_req:
release_mem_region(base, len);
err:
+ kfree(dev);
+
return ret;
}
From: Wei Yongjun <[email protected]>
commit e27d4b30b71c66986196d8a1eb93cba9f602904a upstream.
If 'usb_otg_descriptor_alloc()' fails, we must return a
negative error code -ENOMEM, not 0.
Fixes: 1156e91dd7cc ("usb: gadget: ncm: allocate and init otg descriptor by otg capabilities")
Reported-by: Hulk Robot <[email protected]>
Signed-off-by: Wei Yongjun <[email protected]>
Signed-off-by: Felipe Balbi <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/gadget/legacy/ncm.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
--- a/drivers/usb/gadget/legacy/ncm.c
+++ b/drivers/usb/gadget/legacy/ncm.c
@@ -162,8 +162,10 @@ static int gncm_bind(struct usb_composit
struct usb_descriptor_header *usb_desc;
usb_desc = usb_otg_descriptor_alloc(gadget);
- if (!usb_desc)
+ if (!usb_desc) {
+ status = -ENOMEM;
goto fail;
+ }
usb_otg_descriptor_init(gadget, usb_desc);
otg_desc[0] = usb_desc;
otg_desc[1] = NULL;
From: Dmitry Torokhov <[email protected]>
commit 882f312dc0751c973db26478f07f082c584d16aa upstream.
We do not need explicitly call dev_set_drvdata(), as it is done for us by
device_create().
Acked-by: Richard Cochran <[email protected]>
Signed-off-by: Dmitry Torokhov <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Ben Hutchings <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/ptp/ptp_clock.c | 2 --
1 file changed, 2 deletions(-)
diff --git a/drivers/ptp/ptp_clock.c b/drivers/ptp/ptp_clock.c
index 2aa5b37cc6d24..08f304b83ad13 100644
--- a/drivers/ptp/ptp_clock.c
+++ b/drivers/ptp/ptp_clock.c
@@ -220,8 +220,6 @@ struct ptp_clock *ptp_clock_register(struct ptp_clock_info *info,
if (IS_ERR(ptp->dev))
goto no_device;
- dev_set_drvdata(ptp->dev, ptp);
-
err = ptp_populate_sysfs(ptp);
if (err)
goto no_sysfs;
--
2.20.1
From: Wei Yongjun <[email protected]>
commit e8f7f9e3499a6d96f7f63a4818dc7d0f45a7783b upstream.
If 'usb_otg_descriptor_alloc()' fails, we must return a
negative error code -ENOMEM, not 0.
Fixes: ab6796ae9833 ("usb: gadget: cdc2: allocate and init otg descriptor by otg capabilities")
Reported-by: Hulk Robot <[email protected]>
Signed-off-by: Wei Yongjun <[email protected]>
Signed-off-by: Felipe Balbi <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/gadget/legacy/cdc2.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
--- a/drivers/usb/gadget/legacy/cdc2.c
+++ b/drivers/usb/gadget/legacy/cdc2.c
@@ -183,8 +183,10 @@ static int cdc_bind(struct usb_composite
struct usb_descriptor_header *usb_desc;
usb_desc = usb_otg_descriptor_alloc(gadget);
- if (!usb_desc)
+ if (!usb_desc) {
+ status = -ENOMEM;
goto fail1;
+ }
usb_otg_descriptor_init(gadget, usb_desc);
otg_desc[0] = usb_desc;
otg_desc[1] = NULL;
From: Kai-Heng Feng <[email protected]>
commit f41224efcf8aafe80ea47ac870c5e32f3209ffc8 upstream.
This reverts commit 3b36b13d5e69d6f51ff1c55d1b404a74646c9757.
Enable power save node breaks some systems with ACL225. Revert the patch
and use a platform specific quirk for the original issue isntead.
Fixes: 3b36b13d5e69 ("ALSA: hda/realtek: Fix pop noise on ALC225")
BugLink: https://bugs.launchpad.net/bugs/1875916
Signed-off-by: Kai-Heng Feng <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
sound/pci/hda/patch_realtek.c | 2 --
1 file changed, 2 deletions(-)
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -4212,8 +4212,6 @@ static void alc_determine_headset_type(s
is_ctia = (val & 0x1c02) == 0x1c02;
break;
case 0x10ec0225:
- codec->power_save_node = 1;
- /* fall through */
case 0x10ec0295:
case 0x10ec0299:
alc_process_coef_fw(codec, coef0225);
From: Logan Gunthorpe <[email protected]>
commit 233ed09d7fdacf592ee91e6c97ce5f4364fbe7c0 upstream.
Credit for this patch goes is shared with Dan Williams [1]. I've
taken things one step further to make the helper function more
useful and clean up calling code.
There's a common pattern in the kernel whereby a struct cdev is placed
in a structure along side a struct device which manages the life-cycle
of both. In the naive approach, the reference counting is broken and
the struct device can free everything before the chardev code
is entirely released.
Many developers have solved this problem by linking the internal kobjs
in this fashion:
cdev.kobj.parent = &parent_dev.kobj;
The cdev code explicitly gets and puts a reference to it's kobj parent.
So this seems like it was intended to be used this way. Dmitrty Torokhov
first put this in place in 2012 with this commit:
2f0157f char_dev: pin parent kobject
and the first instance of the fix was then done in the input subsystem
in the following commit:
4a215aa Input: fix use-after-free introduced with dynamic minor changes
Subsequently over the years, however, this issue seems to have tripped
up multiple developers independently. For example, see these commits:
0d5b7da iio: Prevent race between IIO chardev opening and IIO device
(by Lars-Peter Clausen in 2013)
ba0ef85 tpm: Fix initialization of the cdev
(by Jason Gunthorpe in 2015)
5b28dde [media] media: fix use-after-free in cdev_put() when app exits
after driver unbind
(by Shauh Khan in 2016)
This technique is similarly done in at least 15 places within the kernel
and probably should have been done so in another, at least, 5 places.
The kobj line also looks very suspect in that one would not expect
drivers to have to mess with kobject internals in this way.
Even highly experienced kernel developers can be surprised by this
code, as seen in [2].
To help alleviate this situation, and hopefully prevent future
wasted effort on this problem, this patch introduces a helper function
to register a char device along with its parent struct device.
This creates a more regular API for tying a char device to its parent
without the developer having to set members in the underlying kobject.
This patch introduce cdev_device_add and cdev_device_del which
replaces a common pattern including setting the kobj parent, calling
cdev_add and then calling device_add. It also introduces cdev_set_parent
for the few cases that set the kobject parent without using device_add.
[1] https://lkml.org/lkml/2017/2/13/700
[2] https://lkml.org/lkml/2017/2/10/370
Signed-off-by: Logan Gunthorpe <[email protected]>
Signed-off-by: Dan Williams <[email protected]>
Reviewed-by: Hans Verkuil <[email protected]>
Reviewed-by: Alexandre Belloni <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Ben Hutchings <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/char_dev.c | 86 ++++++++++++++++++++++++++++++++++++++++++++
include/linux/cdev.h | 5 +++
2 files changed, 91 insertions(+)
diff --git a/fs/char_dev.c b/fs/char_dev.c
index 23e0477edf7d6..1bbb966c0783f 100644
--- a/fs/char_dev.c
+++ b/fs/char_dev.c
@@ -477,6 +477,85 @@ int cdev_add(struct cdev *p, dev_t dev, unsigned count)
return 0;
}
+/**
+ * cdev_set_parent() - set the parent kobject for a char device
+ * @p: the cdev structure
+ * @kobj: the kobject to take a reference to
+ *
+ * cdev_set_parent() sets a parent kobject which will be referenced
+ * appropriately so the parent is not freed before the cdev. This
+ * should be called before cdev_add.
+ */
+void cdev_set_parent(struct cdev *p, struct kobject *kobj)
+{
+ WARN_ON(!kobj->state_initialized);
+ p->kobj.parent = kobj;
+}
+
+/**
+ * cdev_device_add() - add a char device and it's corresponding
+ * struct device, linkink
+ * @dev: the device structure
+ * @cdev: the cdev structure
+ *
+ * cdev_device_add() adds the char device represented by @cdev to the system,
+ * just as cdev_add does. It then adds @dev to the system using device_add
+ * The dev_t for the char device will be taken from the struct device which
+ * needs to be initialized first. This helper function correctly takes a
+ * reference to the parent device so the parent will not get released until
+ * all references to the cdev are released.
+ *
+ * This helper uses dev->devt for the device number. If it is not set
+ * it will not add the cdev and it will be equivalent to device_add.
+ *
+ * This function should be used whenever the struct cdev and the
+ * struct device are members of the same structure whose lifetime is
+ * managed by the struct device.
+ *
+ * NOTE: Callers must assume that userspace was able to open the cdev and
+ * can call cdev fops callbacks at any time, even if this function fails.
+ */
+int cdev_device_add(struct cdev *cdev, struct device *dev)
+{
+ int rc = 0;
+
+ if (dev->devt) {
+ cdev_set_parent(cdev, &dev->kobj);
+
+ rc = cdev_add(cdev, dev->devt, 1);
+ if (rc)
+ return rc;
+ }
+
+ rc = device_add(dev);
+ if (rc)
+ cdev_del(cdev);
+
+ return rc;
+}
+
+/**
+ * cdev_device_del() - inverse of cdev_device_add
+ * @dev: the device structure
+ * @cdev: the cdev structure
+ *
+ * cdev_device_del() is a helper function to call cdev_del and device_del.
+ * It should be used whenever cdev_device_add is used.
+ *
+ * If dev->devt is not set it will not remove the cdev and will be equivalent
+ * to device_del.
+ *
+ * NOTE: This guarantees that associated sysfs callbacks are not running
+ * or runnable, however any cdevs already open will remain and their fops
+ * will still be callable even after this function returns.
+ */
+void cdev_device_del(struct cdev *cdev, struct device *dev)
+{
+ device_del(dev);
+ if (dev->devt)
+ cdev_del(cdev);
+}
+
static void cdev_unmap(dev_t dev, unsigned count)
{
kobj_unmap(cdev_map, dev, count);
@@ -488,6 +567,10 @@ static void cdev_unmap(dev_t dev, unsigned count)
*
* cdev_del() removes @p from the system, possibly freeing the structure
* itself.
+ *
+ * NOTE: This guarantees that cdev device will no longer be able to be
+ * opened, however any cdevs already open will remain and their fops will
+ * still be callable even after cdev_del returns.
*/
void cdev_del(struct cdev *p)
{
@@ -576,5 +659,8 @@ EXPORT_SYMBOL(cdev_init);
EXPORT_SYMBOL(cdev_alloc);
EXPORT_SYMBOL(cdev_del);
EXPORT_SYMBOL(cdev_add);
+EXPORT_SYMBOL(cdev_set_parent);
+EXPORT_SYMBOL(cdev_device_add);
+EXPORT_SYMBOL(cdev_device_del);
EXPORT_SYMBOL(__register_chrdev);
EXPORT_SYMBOL(__unregister_chrdev);
diff --git a/include/linux/cdev.h b/include/linux/cdev.h
index f8763615a5f2d..408bc09ce497b 100644
--- a/include/linux/cdev.h
+++ b/include/linux/cdev.h
@@ -4,6 +4,7 @@
#include <linux/kobject.h>
#include <linux/kdev_t.h>
#include <linux/list.h>
+#include <linux/device.h>
struct file_operations;
struct inode;
@@ -26,6 +27,10 @@ void cdev_put(struct cdev *p);
int cdev_add(struct cdev *, dev_t, unsigned);
+void cdev_set_parent(struct cdev *p, struct kobject *kobj);
+int cdev_device_add(struct cdev *cdev, struct device *dev);
+void cdev_device_del(struct cdev *cdev, struct device *dev);
+
void cdev_del(struct cdev *);
void cd_forget(struct inode *);
--
2.20.1
From: Geert Uytterhoeven <[email protected]>
commit e47cb97f153193d4b41ca8d48127da14513d54c7 upstream.
The Clock Pulse Generator (CPG) device node lacks the extal2 clock.
This may lead to a failure registering the "r" clock, or to a wrong
parent for the "usb24s" clock, depending on MD_CK2 pin configuration and
boot loader CPG_USBCKCR register configuration.
This went unnoticed, as this does not affect the single upstream board
configuration, which relies on the first clock input only.
Fixes: d9ffd583bf345e2e ("ARM: shmobile: r8a7740: add SoC clocks to DTS")
Signed-off-by: Geert Uytterhoeven <[email protected]>
Reviewed-by: Ulrich Hecht <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/arm/boot/dts/r8a7740.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/arch/arm/boot/dts/r8a7740.dtsi
+++ b/arch/arm/boot/dts/r8a7740.dtsi
@@ -467,7 +467,7 @@
cpg_clocks: cpg_clocks@e6150000 {
compatible = "renesas,r8a7740-cpg-clocks";
reg = <0xe6150000 0x10000>;
- clocks = <&extal1_clk>, <&extalr_clk>;
+ clocks = <&extal1_clk>, <&extal2_clk>, <&extalr_clk>;
#clock-cells = <1>;
clock-output-names = "system", "pllc0", "pllc1",
"pllc2", "r",
From: Christophe JAILLET <[email protected]>
[ Upstream commit 10e3cc180e64385edc9890c6855acf5ed9ca1339 ]
A call to 'dma_alloc_coherent()' is hidden in 'sonic_alloc_descriptors()',
called from 'sonic_probe1()'.
This is correctly freed in the remove function, but not in the error
handling path of the probe function.
Fix it and add the missing 'dma_free_coherent()' call.
While at it, rename a label in order to be slightly more informative.
Fixes: efcce839360f ("[PATCH] macsonic/jazzsonic network drivers update")
Signed-off-by: Christophe JAILLET <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/natsemi/jazzsonic.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/drivers/net/ethernet/natsemi/jazzsonic.c b/drivers/net/ethernet/natsemi/jazzsonic.c
index acf3f11e38cc1..68d2f31921ff8 100644
--- a/drivers/net/ethernet/natsemi/jazzsonic.c
+++ b/drivers/net/ethernet/natsemi/jazzsonic.c
@@ -247,13 +247,15 @@ static int jazz_sonic_probe(struct platform_device *pdev)
goto out;
err = register_netdev(dev);
if (err)
- goto out1;
+ goto undo_probe1;
printk("%s: MAC %pM IRQ %d\n", dev->name, dev->dev_addr, dev->irq);
return 0;
-out1:
+undo_probe1:
+ dma_free_coherent(lp->device, SIZEOF_SONIC_DESC * SONIC_BUS_SCALE(lp->dma_bitmode),
+ lp->descriptors, lp->descriptors_laddr);
release_mem_region(dev->base_addr, SONIC_MEM_SIZE);
out:
free_netdev(dev);
--
2.20.1
From: Linus Torvalds <[email protected]>
commit 5a76021c2eff7fcf2f0918a08fd8a37ce7922921 upstream.
This is the final array bounds warning removal for gcc-10 for now.
Again, the warning is good, and we should re-enable all these warnings
when we have converted all the legacy array declaration cases to
flexible arrays. But in the meantime, it's just noise.
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
Makefile | 1 +
1 file changed, 1 insertion(+)
--- a/Makefile
+++ b/Makefile
@@ -800,6 +800,7 @@ KBUILD_CFLAGS += $(call cc-disable-warni
# We'll want to enable this eventually, but it's not going away for 5.7 at least
KBUILD_CFLAGS += $(call cc-disable-warning, zero-length-bounds)
KBUILD_CFLAGS += $(call cc-disable-warning, array-bounds)
+KBUILD_CFLAGS += $(call cc-disable-warning, stringop-overflow)
# Enabled with W=2, disabled by default as noisy
KBUILD_CFLAGS += $(call cc-disable-warning, maybe-uninitialized)
From: Jason Gunthorpe <[email protected]>
commit 01b2bafe57b19d9119413f138765ef57990921ce upstream.
Aside from good practice, this avoids a warning from gcc 10:
./include/linux/kernel.h:997:3: warning: array subscript -31 is outside array bounds of ‘struct list_head[1]’ [-Warray-bounds]
997 | ((type *)(__mptr - offsetof(type, member))); })
| ~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
./include/linux/list.h:493:2: note: in expansion of macro ‘container_of’
493 | container_of(ptr, type, member)
| ^~~~~~~~~~~~
./include/linux/pnp.h:275:30: note: in expansion of macro ‘list_entry’
275 | #define global_to_pnp_dev(n) list_entry(n, struct pnp_dev, global_list)
| ^~~~~~~~~~
./include/linux/pnp.h:281:11: note: in expansion of macro ‘global_to_pnp_dev’
281 | (dev) != global_to_pnp_dev(&pnp_global); \
| ^~~~~~~~~~~~~~~~~
arch/x86/kernel/rtc.c:189:2: note: in expansion of macro ‘pnp_for_each_dev’
189 | pnp_for_each_dev(dev) {
Because the common code doesn't cast the starting list_head to the
containing struct.
Signed-off-by: Jason Gunthorpe <[email protected]>
[ rjw: Whitespace adjustments ]
Signed-off-by: Rafael J. Wysocki <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
include/linux/pnp.h | 29 +++++++++--------------------
1 file changed, 9 insertions(+), 20 deletions(-)
--- a/include/linux/pnp.h
+++ b/include/linux/pnp.h
@@ -219,10 +219,8 @@ struct pnp_card {
#define global_to_pnp_card(n) list_entry(n, struct pnp_card, global_list)
#define protocol_to_pnp_card(n) list_entry(n, struct pnp_card, protocol_list)
#define to_pnp_card(n) container_of(n, struct pnp_card, dev)
-#define pnp_for_each_card(card) \
- for((card) = global_to_pnp_card(pnp_cards.next); \
- (card) != global_to_pnp_card(&pnp_cards); \
- (card) = global_to_pnp_card((card)->global_list.next))
+#define pnp_for_each_card(card) \
+ list_for_each_entry(card, &pnp_cards, global_list)
struct pnp_card_link {
struct pnp_card *card;
@@ -275,14 +273,9 @@ struct pnp_dev {
#define card_to_pnp_dev(n) list_entry(n, struct pnp_dev, card_list)
#define protocol_to_pnp_dev(n) list_entry(n, struct pnp_dev, protocol_list)
#define to_pnp_dev(n) container_of(n, struct pnp_dev, dev)
-#define pnp_for_each_dev(dev) \
- for((dev) = global_to_pnp_dev(pnp_global.next); \
- (dev) != global_to_pnp_dev(&pnp_global); \
- (dev) = global_to_pnp_dev((dev)->global_list.next))
-#define card_for_each_dev(card,dev) \
- for((dev) = card_to_pnp_dev((card)->devices.next); \
- (dev) != card_to_pnp_dev(&(card)->devices); \
- (dev) = card_to_pnp_dev((dev)->card_list.next))
+#define pnp_for_each_dev(dev) list_for_each_entry(dev, &pnp_global, global_list)
+#define card_for_each_dev(card, dev) \
+ list_for_each_entry(dev, &(card)->devices, card_list)
#define pnp_dev_name(dev) (dev)->name
static inline void *pnp_get_drvdata(struct pnp_dev *pdev)
@@ -436,14 +429,10 @@ struct pnp_protocol {
};
#define to_pnp_protocol(n) list_entry(n, struct pnp_protocol, protocol_list)
-#define protocol_for_each_card(protocol,card) \
- for((card) = protocol_to_pnp_card((protocol)->cards.next); \
- (card) != protocol_to_pnp_card(&(protocol)->cards); \
- (card) = protocol_to_pnp_card((card)->protocol_list.next))
-#define protocol_for_each_dev(protocol,dev) \
- for((dev) = protocol_to_pnp_dev((protocol)->devices.next); \
- (dev) != protocol_to_pnp_dev(&(protocol)->devices); \
- (dev) = protocol_to_pnp_dev((dev)->protocol_list.next))
+#define protocol_for_each_card(protocol, card) \
+ list_for_each_entry(card, &(protocol)->cards, protocol_list)
+#define protocol_for_each_dev(protocol, dev) \
+ list_for_each_entry(dev, &(protocol)->devices, protocol_list)
extern struct bus_type pnp_bus_type;
From: Florian Fainelli <[email protected]>
commit 55f53567afe5f0cd2fd9e006b174c08c31c466f8 upstream.
Our statistics strings are allocated at initialization without being
bound to a specific size, yet, we would copy ETH_GSTRING_LEN bytes using
memcpy() which would create out of bounds accesses, this was flagged by
KASAN. Replace this with strlcpy() to make sure we are bound the source
buffer size and we also always NUL-terminate strings.
Fixes: 2b2427d06426 ("phy: micrel: Add ethtool statistics counters")
Signed-off-by: Florian Fainelli <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/phy/micrel.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/drivers/net/phy/micrel.c
+++ b/drivers/net/phy/micrel.c
@@ -677,8 +677,8 @@ static void kszphy_get_strings(struct ph
int i;
for (i = 0; i < ARRAY_SIZE(kszphy_hw_stats); i++) {
- memcpy(data + i * ETH_GSTRING_LEN,
- kszphy_hw_stats[i].string, ETH_GSTRING_LEN);
+ strlcpy(data + i * ETH_GSTRING_LEN,
+ kszphy_hw_stats[i].string, ETH_GSTRING_LEN);
}
}
From: Zefan Li <[email protected]>
[ Upstream commit 090e28b229af92dc5b40786ca673999d59e73056 ]
If systemd is configured to use hybrid mode which enables the use of
both cgroup v1 and v2, systemd will create new cgroup on both the default
root (v2) and netprio_cgroup hierarchy (v1) for a new session and attach
task to the two cgroups. If the task does some network thing then the v2
cgroup can never be freed after the session exited.
One of our machines ran into OOM due to this memory leak.
In the scenario described above when sk_alloc() is called
cgroup_sk_alloc() thought it's in v2 mode, so it stores
the cgroup pointer in sk->sk_cgrp_data and increments
the cgroup refcnt, but then sock_update_netprioidx()
thought it's in v1 mode, so it stores netprioidx value
in sk->sk_cgrp_data, so the cgroup refcnt will never be freed.
Currently we do the mode switch when someone writes to the ifpriomap
cgroup control file. The easiest fix is to also do the switch when
a task is attached to a new cgroup.
Fixes: bd1060a1d671 ("sock, cgroup: add sock->sk_cgroup")
Reported-by: Yang Yingliang <[email protected]>
Tested-by: Yang Yingliang <[email protected]>
Signed-off-by: Zefan Li <[email protected]>
Acked-by: Tejun Heo <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/core/netprio_cgroup.c | 2 ++
1 file changed, 2 insertions(+)
--- a/net/core/netprio_cgroup.c
+++ b/net/core/netprio_cgroup.c
@@ -237,6 +237,8 @@ static void net_prio_attach(struct cgrou
struct task_struct *p;
struct cgroup_subsys_state *css;
+ cgroup_sk_alloc_disable();
+
cgroup_taskset_for_each(p, css, tset) {
void *v = (void *)(unsigned long)css->cgroup->id;
From: Waiman Long <[email protected]>
commit 5acb3cc2c2e9d3020a4fee43763c6463767f1572 upstream.
The lockdep code had reported the following unsafe locking scenario:
CPU0 CPU1
---- ----
lock(s_active#228);
lock(&bdev->bd_mutex/1);
lock(s_active#228);
lock(&bdev->bd_mutex);
*** DEADLOCK ***
The deadlock may happen when one task (CPU1) is trying to delete a
partition in a block device and another task (CPU0) is accessing
tracing sysfs file (e.g. /sys/block/dm-1/trace/act_mask) in that
partition.
The s_active isn't an actual lock. It is a reference count (kn->count)
on the sysfs (kernfs) file. Removal of a sysfs file, however, require
a wait until all the references are gone. The reference count is
treated like a rwsem using lockdep instrumentation code.
The fact that a thread is in the sysfs callback method or in the
ioctl call means there is a reference to the opended sysfs or device
file. That should prevent the underlying block structure from being
removed.
Instead of using bd_mutex in the block_device structure, a new
blk_trace_mutex is now added to the request_queue structure to protect
access to the blk_trace structure.
Suggested-by: Christoph Hellwig <[email protected]>
Signed-off-by: Waiman Long <[email protected]>
Acked-by: Steven Rostedt (VMware) <[email protected]>
Fix typo in patch subject line, and prune a comment detailing how
the code used to work.
Signed-off-by: Jens Axboe <[email protected]>
Signed-off-by: Ben Hutchings <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
block/blk-core.c | 3 +++
include/linux/blkdev.h | 1 +
kernel/trace/blktrace.c | 18 ++++++++++++------
3 files changed, 16 insertions(+), 6 deletions(-)
diff --git a/block/blk-core.c b/block/blk-core.c
index bdb906bbfe198..4987f312a95f4 100644
--- a/block/blk-core.c
+++ b/block/blk-core.c
@@ -729,6 +729,9 @@ struct request_queue *blk_alloc_queue_node(gfp_t gfp_mask, int node_id)
kobject_init(&q->kobj, &blk_queue_ktype);
+#ifdef CONFIG_BLK_DEV_IO_TRACE
+ mutex_init(&q->blk_trace_mutex);
+#endif
mutex_init(&q->sysfs_lock);
spin_lock_init(&q->__queue_lock);
diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h
index 2fc4ba6fa07f9..a8dfbad42d1b0 100644
--- a/include/linux/blkdev.h
+++ b/include/linux/blkdev.h
@@ -446,6 +446,7 @@ struct request_queue {
int node;
#ifdef CONFIG_BLK_DEV_IO_TRACE
struct blk_trace *blk_trace;
+ struct mutex blk_trace_mutex;
#endif
/*
* for flush operations
diff --git a/kernel/trace/blktrace.c b/kernel/trace/blktrace.c
index bfa8bb3a6e196..ff1384c5884c5 100644
--- a/kernel/trace/blktrace.c
+++ b/kernel/trace/blktrace.c
@@ -644,6 +644,12 @@ int blk_trace_startstop(struct request_queue *q, int start)
}
EXPORT_SYMBOL_GPL(blk_trace_startstop);
+/*
+ * When reading or writing the blktrace sysfs files, the references to the
+ * opened sysfs or device files should prevent the underlying block device
+ * from being removed. So no further delete protection is really needed.
+ */
+
/**
* blk_trace_ioctl: - handle the ioctls associated with tracing
* @bdev: the block device
@@ -661,7 +667,7 @@ int blk_trace_ioctl(struct block_device *bdev, unsigned cmd, char __user *arg)
if (!q)
return -ENXIO;
- mutex_lock(&bdev->bd_mutex);
+ mutex_lock(&q->blk_trace_mutex);
switch (cmd) {
case BLKTRACESETUP:
@@ -687,7 +693,7 @@ int blk_trace_ioctl(struct block_device *bdev, unsigned cmd, char __user *arg)
break;
}
- mutex_unlock(&bdev->bd_mutex);
+ mutex_unlock(&q->blk_trace_mutex);
return ret;
}
@@ -1656,7 +1662,7 @@ static ssize_t sysfs_blk_trace_attr_show(struct device *dev,
if (q == NULL)
goto out_bdput;
- mutex_lock(&bdev->bd_mutex);
+ mutex_lock(&q->blk_trace_mutex);
if (attr == &dev_attr_enable) {
ret = sprintf(buf, "%u\n", !!q->blk_trace);
@@ -1675,7 +1681,7 @@ static ssize_t sysfs_blk_trace_attr_show(struct device *dev,
ret = sprintf(buf, "%llu\n", q->blk_trace->end_lba);
out_unlock_bdev:
- mutex_unlock(&bdev->bd_mutex);
+ mutex_unlock(&q->blk_trace_mutex);
out_bdput:
bdput(bdev);
out:
@@ -1717,7 +1723,7 @@ static ssize_t sysfs_blk_trace_attr_store(struct device *dev,
if (q == NULL)
goto out_bdput;
- mutex_lock(&bdev->bd_mutex);
+ mutex_lock(&q->blk_trace_mutex);
if (attr == &dev_attr_enable) {
if (!!value == !!q->blk_trace) {
@@ -1747,7 +1753,7 @@ static ssize_t sysfs_blk_trace_attr_store(struct device *dev,
}
out_unlock_bdev:
- mutex_unlock(&bdev->bd_mutex);
+ mutex_unlock(&q->blk_trace_mutex);
out_bdput:
bdput(bdev);
out:
--
2.20.1
From: Linus Torvalds <[email protected]>
commit 1a263ae60b04de959d9ce9caea4889385eefcc7b upstream.
gcc-10 has started warning about conflicting types for a few new
built-in functions, particularly 'free()'.
This results in warnings like:
crypto/xts.c:325:13: warning: conflicting types for built-in function ‘free’; expected ‘void(void *)’ [-Wbuiltin-declaration-mismatch]
because the crypto layer had its local freeing functions called
'free()'.
Gcc-10 is in the wrong here, since that function is marked 'static', and
thus there is no chance of confusion with any standard library function
namespace.
But the simplest thing to do is to just use a different name here, and
avoid this gcc mis-feature.
[ Side note: gcc knowing about 'free()' is in itself not the
mis-feature: the semantics of 'free()' are special enough that a
compiler can validly do special things when seeing it.
So the mis-feature here is that gcc thinks that 'free()' is some
restricted name, and you can't shadow it as a local static function.
Making the special 'free()' semantics be a function attribute rather
than tied to the name would be the much better model ]
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
crypto/lrw.c | 4 ++--
crypto/xts.c | 4 ++--
2 files changed, 4 insertions(+), 4 deletions(-)
--- a/crypto/lrw.c
+++ b/crypto/lrw.c
@@ -377,7 +377,7 @@ out_put_alg:
return inst;
}
-static void free(struct crypto_instance *inst)
+static void free_inst(struct crypto_instance *inst)
{
crypto_drop_spawn(crypto_instance_ctx(inst));
kfree(inst);
@@ -386,7 +386,7 @@ static void free(struct crypto_instance
static struct crypto_template crypto_tmpl = {
.name = "lrw",
.alloc = alloc,
- .free = free,
+ .free = free_inst,
.module = THIS_MODULE,
};
--- a/crypto/xts.c
+++ b/crypto/xts.c
@@ -329,7 +329,7 @@ out_put_alg:
return inst;
}
-static void free(struct crypto_instance *inst)
+static void free_inst(struct crypto_instance *inst)
{
crypto_drop_spawn(crypto_instance_ctx(inst));
kfree(inst);
@@ -338,7 +338,7 @@ static void free(struct crypto_instance
static struct crypto_template crypto_tmpl = {
.name = "xts",
.alloc = alloc,
- .free = free,
+ .free = free_inst,
.module = THIS_MODULE,
};
From: Eric W. Biederman <[email protected]>
commit f87d1c9559164294040e58f5e3b74a162bf7c6e8 upstream.
I goofed when I added mm->user_ns support to would_dump. I missed the
fact that in the case of binfmt_loader, binfmt_em86, binfmt_misc, and
binfmt_script bprm->file is reassigned. Which made the move of
would_dump from setup_new_exec to __do_execve_file before exec_binprm
incorrect as it can result in would_dump running on the script instead
of the interpreter of the script.
The net result is that the code stopped making unreadable interpreters
undumpable. Which allows them to be ptraced and written to disk
without special permissions. Oops.
The move was necessary because the call in set_new_exec was after
bprm->mm was no longer valid.
To correct this mistake move the misplaced would_dump from
__do_execve_file into flos_old_exec, before exec_mmap is called.
I tested and confirmed that without this fix I can attach with gdb to
a script with an unreadable interpreter, and with this fix I can not.
Cc: [email protected]
Fixes: f84df2a6f268 ("exec: Ensure mm->user_ns contains the execed files")
Signed-off-by: "Eric W. Biederman" <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/exec.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/fs/exec.c
+++ b/fs/exec.c
@@ -1270,6 +1270,8 @@ int flush_old_exec(struct linux_binprm *
*/
set_mm_exe_file(bprm->mm, bprm->file);
+ would_dump(bprm, bprm->file);
+
/*
* Release all of the old mmap stuff
*/
@@ -1780,8 +1782,6 @@ static int do_execveat_common(int fd, st
if (retval < 0)
goto out;
- would_dump(bprm, bprm->file);
-
retval = exec_binprm(bprm);
if (retval < 0)
goto out;
From: Cong Wang <[email protected]>
[ Upstream commit dd912306ff008891c82cd9f63e8181e47a9cb2fb ]
syzbot managed to trigger a recursive NETDEV_FEAT_CHANGE event
between bonding master and slave. I managed to find a reproducer
for this:
ip li set bond0 up
ifenslave bond0 eth0
brctl addbr br0
ethtool -K eth0 lro off
brctl addif br0 bond0
ip li set br0 up
When a NETDEV_FEAT_CHANGE event is triggered on a bonding slave,
it captures this and calls bond_compute_features() to fixup its
master's and other slaves' features. However, when syncing with
its lower devices by netdev_sync_lower_features() this event is
triggered again on slaves when the LRO feature fails to change,
so it goes back and forth recursively until the kernel stack is
exhausted.
Commit 17b85d29e82c intentionally lets __netdev_update_features()
return -1 for such a failure case, so we have to just rely on
the existing check inside netdev_sync_lower_features() and skip
NETDEV_FEAT_CHANGE event only for this specific failure case.
Fixes: fd867d51f889 ("net/core: generic support for disabling netdev features down stack")
Reported-by: [email protected]
Reported-by: [email protected]
Cc: Jarod Wilson <[email protected]>
Cc: Nikolay Aleksandrov <[email protected]>
Cc: Josh Poimboeuf <[email protected]>
Cc: Jann Horn <[email protected]>
Reviewed-by: Jay Vosburgh <[email protected]>
Signed-off-by: Cong Wang <[email protected]>
Acked-by: Nikolay Aleksandrov <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/core/dev.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
--- a/net/core/dev.c
+++ b/net/core/dev.c
@@ -6939,11 +6939,13 @@ static void netdev_sync_lower_features(s
netdev_dbg(upper, "Disabling feature %pNF on lower dev %s.\n",
&feature, lower->name);
lower->wanted_features &= ~feature;
- netdev_update_features(lower);
+ __netdev_update_features(lower);
if (unlikely(lower->features & feature))
netdev_WARN(upper, "failed to disable %pNF on %s!\n",
&feature, lower->name);
+ else
+ netdev_features_change(lower);
}
}
}
From: "Maciej Żenczykowski" <[email protected]>
[ Upstream commit 09454fd0a4ce23cb3d8af65066c91a1bf27120dd ]
This reverts commit 19bda36c4299ce3d7e5bce10bebe01764a655a6d:
| ipv6: add mtu lock check in __ip6_rt_update_pmtu
|
| Prior to this patch, ipv6 didn't do mtu lock check in ip6_update_pmtu.
| It leaded to that mtu lock doesn't really work when receiving the pkt
| of ICMPV6_PKT_TOOBIG.
|
| This patch is to add mtu lock check in __ip6_rt_update_pmtu just as ipv4
| did in __ip_rt_update_pmtu.
The above reasoning is incorrect. IPv6 *requires* icmp based pmtu to work.
There's already a comment to this effect elsewhere in the kernel:
$ git grep -p -B1 -A3 'RTAX_MTU lock'
net/ipv6/route.c=4813=
static int rt6_mtu_change_route(struct fib6_info *f6i, void *p_arg)
...
/* In IPv6 pmtu discovery is not optional,
so that RTAX_MTU lock cannot disable it.
We still use this lock to block changes
caused by addrconf/ndisc.
*/
This reverts to the pre-4.9 behaviour.
Cc: Eric Dumazet <[email protected]>
Cc: Willem de Bruijn <[email protected]>
Cc: Xin Long <[email protected]>
Cc: Hannes Frederic Sowa <[email protected]>
Signed-off-by: Maciej Żenczykowski <[email protected]>
Fixes: 19bda36c4299 ("ipv6: add mtu lock check in __ip6_rt_update_pmtu")
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/ipv6/route.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
--- a/net/ipv6/route.c
+++ b/net/ipv6/route.c
@@ -1373,8 +1373,10 @@ static void __ip6_rt_update_pmtu(struct
{
struct rt6_info *rt6 = (struct rt6_info *)dst;
- if (dst_metric_locked(dst, RTAX_MTU))
- return;
+ /* Note: do *NOT* check dst_metric_locked(dst, RTAX_MTU)
+ * IPv6 pmtu discovery isn't optional, so 'mtu lock' cannot disable it.
+ * [see also comment in rt6_mtu_change_route()]
+ */
dst_confirm(dst);
mtu = max_t(u32, mtu, IPV6_MIN_MTU);
From: Geert Uytterhoeven <[email protected]>
commit 0f739fdfe9e5ce668bd6d3210f310df282321837 upstream.
The R-Mobile APE6 Compare Match Timer 1 generates 8 interrupts, one for
each channel, but currently only 1 is described.
Fix this by adding the missing interrupts.
Fixes: f7b65230019b9dac ("ARM: shmobile: r8a73a4: Add CMT1 node")
Signed-off-by: Geert Uytterhoeven <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/arm/boot/dts/r8a73a4.dtsi | 9 ++++++++-
1 file changed, 8 insertions(+), 1 deletion(-)
--- a/arch/arm/boot/dts/r8a73a4.dtsi
+++ b/arch/arm/boot/dts/r8a73a4.dtsi
@@ -135,7 +135,14 @@
cmt1: timer@e6130000 {
compatible = "renesas,cmt-48-r8a73a4", "renesas,cmt-48-gen2";
reg = <0 0xe6130000 0 0x1004>;
- interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A73A4_CLK_CMT1>;
clock-names = "fck";
power-domains = <&pd_c5>;
From: Borislav Petkov <[email protected]>
commit a9a3ed1eff3601b63aea4fb462d8b3b92c7c1e7e upstream.
... or the odyssey of trying to disable the stack protector for the
function which generates the stack canary value.
The whole story started with Sergei reporting a boot crash with a kernel
built with gcc-10:
Kernel panic — not syncing: stack-protector: Kernel stack is corrupted in: start_secondary
CPU: 1 PID: 0 Comm: swapper/1 Not tainted 5.6.0-rc5—00235—gfffb08b37df9 #139
Hardware name: Gigabyte Technology Co., Ltd. To be filled by O.E.M./H77M—D3H, BIOS F12 11/14/2013
Call Trace:
dump_stack
panic
? start_secondary
__stack_chk_fail
start_secondary
secondary_startup_64
-—-[ end Kernel panic — not syncing: stack—protector: Kernel stack is corrupted in: start_secondary
This happens because gcc-10 tail-call optimizes the last function call
in start_secondary() - cpu_startup_entry() - and thus emits a stack
canary check which fails because the canary value changes after the
boot_init_stack_canary() call.
To fix that, the initial attempt was to mark the one function which
generates the stack canary with:
__attribute__((optimize("-fno-stack-protector"))) ... start_secondary(void *unused)
however, using the optimize attribute doesn't work cumulatively
as the attribute does not add to but rather replaces previously
supplied optimization options - roughly all -fxxx options.
The key one among them being -fno-omit-frame-pointer and thus leading to
not present frame pointer - frame pointer which the kernel needs.
The next attempt to prevent compilers from tail-call optimizing
the last function call cpu_startup_entry(), shy of carving out
start_secondary() into a separate compilation unit and building it with
-fno-stack-protector, was to add an empty asm("").
This current solution was short and sweet, and reportedly, is supported
by both compilers but we didn't get very far this time: future (LTO?)
optimization passes could potentially eliminate this, which leads us
to the third attempt: having an actual memory barrier there which the
compiler cannot ignore or move around etc.
That should hold for a long time, but hey we said that about the other
two solutions too so...
Reported-by: Sergei Trofimovich <[email protected]>
Signed-off-by: Borislav Petkov <[email protected]>
Tested-by: Kalle Valo <[email protected]>
Cc: <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/include/asm/stackprotector.h | 7 ++++++-
arch/x86/kernel/smpboot.c | 8 ++++++++
arch/x86/xen/smp.c | 1 +
include/linux/compiler.h | 7 +++++++
init/main.c | 2 ++
5 files changed, 24 insertions(+), 1 deletion(-)
--- a/arch/x86/include/asm/stackprotector.h
+++ b/arch/x86/include/asm/stackprotector.h
@@ -54,8 +54,13 @@
/*
* Initialize the stackprotector canary value.
*
- * NOTE: this must only be called from functions that never return,
+ * NOTE: this must only be called from functions that never return
* and it must always be inlined.
+ *
+ * In addition, it should be called from a compilation unit for which
+ * stack protector is disabled. Alternatively, the caller should not end
+ * with a function call which gets tail-call optimized as that would
+ * lead to checking a modified canary value.
*/
static __always_inline void boot_init_stack_canary(void)
{
--- a/arch/x86/kernel/smpboot.c
+++ b/arch/x86/kernel/smpboot.c
@@ -249,6 +249,14 @@ static void notrace start_secondary(void
wmb();
cpu_startup_entry(CPUHP_AP_ONLINE_IDLE);
+
+ /*
+ * Prevent tail call to cpu_startup_entry() because the stack protector
+ * guard has been changed a couple of function calls up, in
+ * boot_init_stack_canary() and must not be checked before tail calling
+ * another function.
+ */
+ prevent_tail_call_optimization();
}
/**
--- a/arch/x86/xen/smp.c
+++ b/arch/x86/xen/smp.c
@@ -116,6 +116,7 @@ asmlinkage __visible void cpu_bringup_an
#endif
cpu_bringup();
cpu_startup_entry(CPUHP_AP_ONLINE_IDLE);
+ prevent_tail_call_optimization();
}
void xen_smp_intr_free(unsigned int cpu)
--- a/include/linux/compiler.h
+++ b/include/linux/compiler.h
@@ -605,4 +605,11 @@ unsigned long read_word_at_a_time(const
# define __kprobes
# define nokprobe_inline inline
#endif
+
+/*
+ * This is needed in functions which generate the stack canary, see
+ * arch/x86/kernel/smpboot.c::start_secondary() for an example.
+ */
+#define prevent_tail_call_optimization() mb()
+
#endif /* __LINUX_COMPILER_H */
--- a/init/main.c
+++ b/init/main.c
@@ -662,6 +662,8 @@ asmlinkage __visible void __init start_k
/* Do the rest non-__init'ed, we're now alive */
rest_init();
+
+ prevent_tail_call_optimization();
}
/* Call all constructor functions linked into the kernel. */
From: Linus Torvalds <[email protected]>
commit 44720996e2d79e47d508b0abe99b931a726a3197 upstream.
This is another fine warning, related to the 'zero-length-bounds' one,
but hitting the same historical code in the kernel.
Because C didn't historically support flexible array members, we have
code that instead uses a one-sized array, the same way we have cases of
zero-sized arrays.
The one-sized arrays come from either not wanting to use the gcc
zero-sized array extension, or from a slight convenience-feature, where
particularly for strings, the size of the structure now includes the
allocation for the final NUL character.
So with a "char name[1];" at the end of a structure, you can do things
like
v = my_malloc(sizeof(struct vendor) + strlen(name));
and avoid the "+1" for the terminator.
Yes, the modern way to do that is with a flexible array, and using
'offsetof()' instead of 'sizeof()', and adding the "+1" by hand. That
also technically gets the size "more correct" in that it avoids any
alignment (and thus padding) issues, but this is another long-term
cleanup thing that will not happen for 5.7.
So disable the warning for now, even though it's potentially quite
useful. Having a slew of warnings that then hide more urgent new issues
is not an improvement.
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
Makefile | 1 +
1 file changed, 1 insertion(+)
--- a/Makefile
+++ b/Makefile
@@ -799,6 +799,7 @@ KBUILD_CFLAGS += $(call cc-disable-warni
# We'll want to enable this eventually, but it's not going away for 5.7 at least
KBUILD_CFLAGS += $(call cc-disable-warning, zero-length-bounds)
+KBUILD_CFLAGS += $(call cc-disable-warning, array-bounds)
# Enabled with W=2, disabled by default as noisy
KBUILD_CFLAGS += $(call cc-disable-warning, maybe-uninitialized)
From: Sriharsha Allenki <[email protected]>
commit 3c6f8cb92c9178fc0c66b580ea3df1fa3ac1155a upstream.
On platforms with IOMMU enabled, multiple SGs can be coalesced into one
by the IOMMU driver. In that case the SG list processing as part of the
completion of a urb on a bulk endpoint can result into a NULL pointer
dereference with the below stack dump.
<6> Unable to handle kernel NULL pointer dereference at virtual address 0000000c
<6> pgd = c0004000
<6> [0000000c] *pgd=00000000
<6> Internal error: Oops: 5 [#1] PREEMPT SMP ARM
<2> PC is at xhci_queue_bulk_tx+0x454/0x80c
<2> LR is at xhci_queue_bulk_tx+0x44c/0x80c
<2> pc : [<c08907c4>] lr : [<c08907bc>] psr: 000000d3
<2> sp : ca337c80 ip : 00000000 fp : ffffffff
<2> r10: 00000000 r9 : 50037000 r8 : 00004000
<2> r7 : 00000000 r6 : 00004000 r5 : 00000000 r4 : 00000000
<2> r3 : 00000000 r2 : 00000082 r1 : c2c1a200 r0 : 00000000
<2> Flags: nzcv IRQs off FIQs off Mode SVC_32 ISA ARM Segment none
<2> Control: 10c0383d Table: b412c06a DAC: 00000051
<6> Process usb-storage (pid: 5961, stack limit = 0xca336210)
<snip>
<2> [<c08907c4>] (xhci_queue_bulk_tx)
<2> [<c0881b3c>] (xhci_urb_enqueue)
<2> [<c0831068>] (usb_hcd_submit_urb)
<2> [<c08350b4>] (usb_sg_wait)
<2> [<c089f384>] (usb_stor_bulk_transfer_sglist)
<2> [<c089f2c0>] (usb_stor_bulk_srb)
<2> [<c089fe38>] (usb_stor_Bulk_transport)
<2> [<c089f468>] (usb_stor_invoke_transport)
<2> [<c08a11b4>] (usb_stor_control_thread)
<2> [<c014a534>] (kthread)
The above NULL pointer dereference is the result of block_len and the
sent_len set to zero after the first SG of the list when IOMMU driver
is enabled. Because of this the loop of processing the SGs has run
more than num_sgs which resulted in a sg_next on the last SG of the
list which has SG_END set.
Fix this by check for the sg before any attributes of the sg are
accessed.
[modified reason for null pointer dereference in commit message subject -Mathias]
Fixes: f9c589e142d04 ("xhci: TD-fragment, align the unsplittable case with a bounce buffer")
Cc: [email protected]
Signed-off-by: Sriharsha Allenki <[email protected]>
Signed-off-by: Mathias Nyman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/host/xhci-ring.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -3347,8 +3347,8 @@ int xhci_queue_bulk_tx(struct xhci_hcd *
/* New sg entry */
--num_sgs;
sent_len -= block_len;
- if (num_sgs != 0) {
- sg = sg_next(sg);
+ sg = sg_next(sg);
+ if (num_sgs != 0 && sg) {
block_len = sg_dma_len(sg);
addr = (u64) sg_dma_address(sg);
addr += sent_len;
From: Jack Morgenstein <[email protected]>
[ Upstream commit 6693ca95bd4330a0ad7326967e1f9bcedd6b0800 ]
In the mlx4_ib_post_send() flow, some functions call ib_get_cached_pkey()
without checking its return value. If ib_get_cached_pkey() returns an
error code, these functions should return failure.
Fixes: 1ffeb2eb8be9 ("IB/mlx4: SR-IOV IB context objects and proxy/tunnel SQP support")
Fixes: 225c7b1feef1 ("IB/mlx4: Add a driver Mellanox ConnectX InfiniBand adapters")
Fixes: e622f2f4ad21 ("IB: split struct ib_send_wr")
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jack Morgenstein <[email protected]>
Signed-off-by: Leon Romanovsky <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/infiniband/hw/mlx4/qp.c | 14 +++++++++++---
1 file changed, 11 insertions(+), 3 deletions(-)
diff --git a/drivers/infiniband/hw/mlx4/qp.c b/drivers/infiniband/hw/mlx4/qp.c
index 709d6491d2435..7284a9176844e 100644
--- a/drivers/infiniband/hw/mlx4/qp.c
+++ b/drivers/infiniband/hw/mlx4/qp.c
@@ -2307,6 +2307,7 @@ static int build_sriov_qp0_header(struct mlx4_ib_sqp *sqp,
int send_size;
int header_size;
int spc;
+ int err;
int i;
if (wr->wr.opcode != IB_WR_SEND)
@@ -2341,7 +2342,9 @@ static int build_sriov_qp0_header(struct mlx4_ib_sqp *sqp,
sqp->ud_header.lrh.virtual_lane = 0;
sqp->ud_header.bth.solicited_event = !!(wr->wr.send_flags & IB_SEND_SOLICITED);
- ib_get_cached_pkey(ib_dev, sqp->qp.port, 0, &pkey);
+ err = ib_get_cached_pkey(ib_dev, sqp->qp.port, 0, &pkey);
+ if (err)
+ return err;
sqp->ud_header.bth.pkey = cpu_to_be16(pkey);
if (sqp->qp.mlx4_ib_qp_type == MLX4_IB_QPT_TUN_SMI_OWNER)
sqp->ud_header.bth.destination_qpn = cpu_to_be32(wr->remote_qpn);
@@ -2618,9 +2621,14 @@ static int build_mlx_header(struct mlx4_ib_sqp *sqp, struct ib_ud_wr *wr,
}
sqp->ud_header.bth.solicited_event = !!(wr->wr.send_flags & IB_SEND_SOLICITED);
if (!sqp->qp.ibqp.qp_num)
- ib_get_cached_pkey(ib_dev, sqp->qp.port, sqp->pkey_index, &pkey);
+ err = ib_get_cached_pkey(ib_dev, sqp->qp.port, sqp->pkey_index,
+ &pkey);
else
- ib_get_cached_pkey(ib_dev, sqp->qp.port, wr->pkey_index, &pkey);
+ err = ib_get_cached_pkey(ib_dev, sqp->qp.port, wr->pkey_index,
+ &pkey);
+ if (err)
+ return err;
+
sqp->ud_header.bth.pkey = cpu_to_be16(pkey);
sqp->ud_header.bth.destination_qpn = cpu_to_be32(wr->remote_qpn);
sqp->ud_header.bth.psn = cpu_to_be32((sqp->send_psn++) & ((1 << 24) - 1));
--
2.20.1
From: Dan Carpenter <[email protected]>
[ Upstream commit 37e31d2d26a4124506c24e95434e9baf3405a23a ]
The i40iw_arp_table() function can return -EOVERFLOW if
i40iw_alloc_resource() fails so we can't just test for "== -1".
Fixes: 4e9042e647ff ("i40iw: add hw and utils files")
Link: https://lore.kernel.org/r/20200422092211.GA195357@mwanda
Signed-off-by: Dan Carpenter <[email protected]>
Acked-by: Shiraz Saleem <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/infiniband/hw/i40iw/i40iw_hw.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/infiniband/hw/i40iw/i40iw_hw.c b/drivers/infiniband/hw/i40iw/i40iw_hw.c
index 0c92a40b3e869..e4867d6de7893 100644
--- a/drivers/infiniband/hw/i40iw/i40iw_hw.c
+++ b/drivers/infiniband/hw/i40iw/i40iw_hw.c
@@ -479,7 +479,7 @@ void i40iw_manage_arp_cache(struct i40iw_device *iwdev,
int arp_index;
arp_index = i40iw_arp_table(iwdev, ip_addr, ipv4, mac_addr, action);
- if (arp_index == -1)
+ if (arp_index < 0)
return;
cqp_request = i40iw_get_cqp_request(&iwdev->cqp, false);
if (!cqp_request)
--
2.20.1
From: Christophe JAILLET <[email protected]>
[ Upstream commit ee8d2267f0e39a1bfd95532da3a6405004114b27 ]
Should an irq requested with 'devm_request_irq' be released explicitly,
it should be done by 'devm_free_irq()', not 'free_irq()'.
Fixes: 6c821bd9edc9 ("net: Add MOXA ART SoCs ethernet driver")
Signed-off-by: Christophe JAILLET <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/moxa/moxart_ether.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/moxa/moxart_ether.c b/drivers/net/ethernet/moxa/moxart_ether.c
index 0622fd03941b8..6fe61d9343cb8 100644
--- a/drivers/net/ethernet/moxa/moxart_ether.c
+++ b/drivers/net/ethernet/moxa/moxart_ether.c
@@ -571,7 +571,7 @@ static int moxart_remove(struct platform_device *pdev)
struct net_device *ndev = platform_get_drvdata(pdev);
unregister_netdev(ndev);
- free_irq(ndev->irq, ndev);
+ devm_free_irq(&pdev->dev, ndev->irq, ndev);
moxart_mac_free_memory(ndev);
free_netdev(ndev);
--
2.20.1
From: Jim Mattson <[email protected]>
commit c4e0e4ab4cf3ec2b3f0b628ead108d677644ebd9 upstream.
Bank_num is a one-based count of banks, not a zero-based index. It
overflows the allocated space only when strictly greater than
KVM_MAX_MCE_BANKS.
Fixes: a9e38c3e01ad ("KVM: x86: Catch potential overrun in MCE setup")
Signed-off-by: Jue Wang <[email protected]>
Signed-off-by: Jim Mattson <[email protected]>
Reviewed-by: Peter Shier <[email protected]>
Message-Id: <[email protected]>
Reviewed-by: Vitaly Kuznetsov <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/kvm/x86.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -3128,7 +3128,7 @@ static int kvm_vcpu_ioctl_x86_setup_mce(
unsigned bank_num = mcg_cap & 0xff, bank;
r = -EINVAL;
- if (!bank_num || bank_num >= KVM_MAX_MCE_BANKS)
+ if (!bank_num || bank_num > KVM_MAX_MCE_BANKS)
goto out;
if (mcg_cap & ~(kvm_mce_cap_supported | 0xff | 0xff0000))
goto out;
From: YueHaibing <[email protected]>
commit aea0a897af9e44c258e8ab9296fad417f1bc063a upstream.
Fix smatch warning:
drivers/ptp/ptp_clock.c:298 ptp_clock_register() warn:
passing zero to 'ERR_PTR'
'err' should be set while device_create_with_groups and
pps_register_source fails
Fixes: 85a66e550195 ("ptp: create "pins" together with the rest of attributes")
Signed-off-by: YueHaibing <[email protected]>
Acked-by: Richard Cochran <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Ben Hutchings <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/ptp/ptp_clock.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/drivers/ptp/ptp_clock.c b/drivers/ptp/ptp_clock.c
index d5ac33350889e..b87b7b0867a4c 100644
--- a/drivers/ptp/ptp_clock.c
+++ b/drivers/ptp/ptp_clock.c
@@ -222,8 +222,10 @@ struct ptp_clock *ptp_clock_register(struct ptp_clock_info *info,
ptp->dev = device_create_with_groups(ptp_class, parent, ptp->devid,
ptp, ptp->pin_attr_groups,
"ptp%d", ptp->index);
- if (IS_ERR(ptp->dev))
+ if (IS_ERR(ptp->dev)) {
+ err = PTR_ERR(ptp->dev);
goto no_device;
+ }
/* Register a new PPS source. */
if (info->pps) {
@@ -234,6 +236,7 @@ struct ptp_clock *ptp_clock_register(struct ptp_clock_info *info,
pps.owner = info->owner;
ptp->pps_source = pps_register_source(&pps, PTP_PPS_DEFAULTS);
if (!ptp->pps_source) {
+ err = -EINVAL;
pr_err("failed to register pps source\n");
goto no_pps;
}
--
2.20.1
From: Vladis Dronov <[email protected]>
commit a33121e5487b424339636b25c35d3a180eaa5f5e upstream.
In a case when a ptp chardev (like /dev/ptp0) is open but an underlying
device is removed, closing this file leads to a race. This reproduces
easily in a kvm virtual machine:
ts# cat openptp0.c
int main() { ... fp = fopen("/dev/ptp0", "r"); ... sleep(10); }
ts# uname -r
5.5.0-rc3-46cf053e
ts# cat /proc/cmdline
... slub_debug=FZP
ts# modprobe ptp_kvm
ts# ./openptp0 &
[1] 670
opened /dev/ptp0, sleeping 10s...
ts# rmmod ptp_kvm
ts# ls /dev/ptp*
ls: cannot access '/dev/ptp*': No such file or directory
ts# ...woken up
[ 48.010809] general protection fault: 0000 [#1] SMP
[ 48.012502] CPU: 6 PID: 658 Comm: openptp0 Not tainted 5.5.0-rc3-46cf053e #25
[ 48.014624] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), ...
[ 48.016270] RIP: 0010:module_put.part.0+0x7/0x80
[ 48.017939] RSP: 0018:ffffb3850073be00 EFLAGS: 00010202
[ 48.018339] RAX: 000000006b6b6b6b RBX: 6b6b6b6b6b6b6b6b RCX: ffff89a476c00ad0
[ 48.018936] RDX: fffff65a08d3ea08 RSI: 0000000000000247 RDI: 6b6b6b6b6b6b6b6b
[ 48.019470] ... ^^^ a slub poison
[ 48.023854] Call Trace:
[ 48.024050] __fput+0x21f/0x240
[ 48.024288] task_work_run+0x79/0x90
[ 48.024555] do_exit+0x2af/0xab0
[ 48.024799] ? vfs_write+0x16a/0x190
[ 48.025082] do_group_exit+0x35/0x90
[ 48.025387] __x64_sys_exit_group+0xf/0x10
[ 48.025737] do_syscall_64+0x3d/0x130
[ 48.026056] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[ 48.026479] RIP: 0033:0x7f53b12082f6
[ 48.026792] ...
[ 48.030945] Modules linked in: ptp i6300esb watchdog [last unloaded: ptp_kvm]
[ 48.045001] Fixing recursive fault but reboot is needed!
This happens in:
static void __fput(struct file *file)
{ ...
if (file->f_op->release)
file->f_op->release(inode, file); <<< cdev is kfree'd here
if (unlikely(S_ISCHR(inode->i_mode) && inode->i_cdev != NULL &&
!(mode & FMODE_PATH))) {
cdev_put(inode->i_cdev); <<< cdev fields are accessed here
Namely:
__fput()
posix_clock_release()
kref_put(&clk->kref, delete_clock) <<< the last reference
delete_clock()
delete_ptp_clock()
kfree(ptp) <<< cdev is embedded in ptp
cdev_put
module_put(p->owner) <<< *p is kfree'd, bang!
Here cdev is embedded in posix_clock which is embedded in ptp_clock.
The race happens because ptp_clock's lifetime is controlled by two
refcounts: kref and cdev.kobj in posix_clock. This is wrong.
Make ptp_clock's sysfs device a parent of cdev with cdev_device_add()
created especially for such cases. This way the parent device with its
ptp_clock is not released until all references to the cdev are released.
This adds a requirement that an initialized but not exposed struct
device should be provided to posix_clock_register() by a caller instead
of a simple dev_t.
This approach was adopted from the commit 72139dfa2464 ("watchdog: Fix
the race between the release of watchdog_core_data and cdev"). See
details of the implementation in the commit 233ed09d7fda ("chardev: add
helper function to register char devs with a struct device").
Link: https://lore.kernel.org/linux-fsdevel/[email protected]/T/#u
Analyzed-by: Stephen Johnston <[email protected]>
Analyzed-by: Vern Lovejoy <[email protected]>
Signed-off-by: Vladis Dronov <[email protected]>
Acked-by: Richard Cochran <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Ben Hutchings <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/ptp/ptp_clock.c | 31 ++++++++++++++-----------------
drivers/ptp/ptp_private.h | 2 +-
include/linux/posix-clock.h | 19 +++++++++++--------
kernel/time/posix-clock.c | 31 +++++++++++++------------------
4 files changed, 39 insertions(+), 44 deletions(-)
diff --git a/drivers/ptp/ptp_clock.c b/drivers/ptp/ptp_clock.c
index b87b7b0867a4c..2c1ae324da182 100644
--- a/drivers/ptp/ptp_clock.c
+++ b/drivers/ptp/ptp_clock.c
@@ -171,9 +171,9 @@ static struct posix_clock_operations ptp_clock_ops = {
.read = ptp_read,
};
-static void delete_ptp_clock(struct posix_clock *pc)
+static void ptp_clock_release(struct device *dev)
{
- struct ptp_clock *ptp = container_of(pc, struct ptp_clock, clock);
+ struct ptp_clock *ptp = container_of(dev, struct ptp_clock, dev);
mutex_destroy(&ptp->tsevq_mux);
mutex_destroy(&ptp->pincfg_mux);
@@ -205,7 +205,6 @@ struct ptp_clock *ptp_clock_register(struct ptp_clock_info *info,
}
ptp->clock.ops = ptp_clock_ops;
- ptp->clock.release = delete_ptp_clock;
ptp->info = info;
ptp->devid = MKDEV(major, index);
ptp->index = index;
@@ -218,15 +217,6 @@ struct ptp_clock *ptp_clock_register(struct ptp_clock_info *info,
if (err)
goto no_pin_groups;
- /* Create a new device in our class. */
- ptp->dev = device_create_with_groups(ptp_class, parent, ptp->devid,
- ptp, ptp->pin_attr_groups,
- "ptp%d", ptp->index);
- if (IS_ERR(ptp->dev)) {
- err = PTR_ERR(ptp->dev);
- goto no_device;
- }
-
/* Register a new PPS source. */
if (info->pps) {
struct pps_source_info pps;
@@ -242,8 +232,18 @@ struct ptp_clock *ptp_clock_register(struct ptp_clock_info *info,
}
}
- /* Create a posix clock. */
- err = posix_clock_register(&ptp->clock, ptp->devid);
+ /* Initialize a new device of our class in our clock structure. */
+ device_initialize(&ptp->dev);
+ ptp->dev.devt = ptp->devid;
+ ptp->dev.class = ptp_class;
+ ptp->dev.parent = parent;
+ ptp->dev.groups = ptp->pin_attr_groups;
+ ptp->dev.release = ptp_clock_release;
+ dev_set_drvdata(&ptp->dev, ptp);
+ dev_set_name(&ptp->dev, "ptp%d", ptp->index);
+
+ /* Create a posix clock and link it to the device. */
+ err = posix_clock_register(&ptp->clock, &ptp->dev);
if (err) {
pr_err("failed to create posix clock\n");
goto no_clock;
@@ -255,8 +255,6 @@ no_clock:
if (ptp->pps_source)
pps_unregister_source(ptp->pps_source);
no_pps:
- device_destroy(ptp_class, ptp->devid);
-no_device:
ptp_cleanup_pin_groups(ptp);
no_pin_groups:
mutex_destroy(&ptp->tsevq_mux);
@@ -278,7 +276,6 @@ int ptp_clock_unregister(struct ptp_clock *ptp)
if (ptp->pps_source)
pps_unregister_source(ptp->pps_source);
- device_destroy(ptp_class, ptp->devid);
ptp_cleanup_pin_groups(ptp);
posix_clock_unregister(&ptp->clock);
diff --git a/drivers/ptp/ptp_private.h b/drivers/ptp/ptp_private.h
index d95888974d0c6..15346e840caa9 100644
--- a/drivers/ptp/ptp_private.h
+++ b/drivers/ptp/ptp_private.h
@@ -40,7 +40,7 @@ struct timestamp_event_queue {
struct ptp_clock {
struct posix_clock clock;
- struct device *dev;
+ struct device dev;
struct ptp_clock_info *info;
dev_t devid;
int index; /* index into clocks.map */
diff --git a/include/linux/posix-clock.h b/include/linux/posix-clock.h
index 83b22ae9ae12a..b39420a0321c3 100644
--- a/include/linux/posix-clock.h
+++ b/include/linux/posix-clock.h
@@ -104,29 +104,32 @@ struct posix_clock_operations {
*
* @ops: Functional interface to the clock
* @cdev: Character device instance for this clock
- * @kref: Reference count.
+ * @dev: Pointer to the clock's device.
* @rwsem: Protects the 'zombie' field from concurrent access.
* @zombie: If 'zombie' is true, then the hardware has disappeared.
- * @release: A function to free the structure when the reference count reaches
- * zero. May be NULL if structure is statically allocated.
*
* Drivers should embed their struct posix_clock within a private
* structure, obtaining a reference to it during callbacks using
* container_of().
+ *
+ * Drivers should supply an initialized but not exposed struct device
+ * to posix_clock_register(). It is used to manage lifetime of the
+ * driver's private structure. It's 'release' field should be set to
+ * a release function for this private structure.
*/
struct posix_clock {
struct posix_clock_operations ops;
struct cdev cdev;
- struct kref kref;
+ struct device *dev;
struct rw_semaphore rwsem;
bool zombie;
- void (*release)(struct posix_clock *clk);
};
/**
* posix_clock_register() - register a new clock
- * @clk: Pointer to the clock. Caller must provide 'ops' and 'release'
- * @devid: Allocated device id
+ * @clk: Pointer to the clock. Caller must provide 'ops' field
+ * @dev: Pointer to the initialized device. Caller must provide
+ * 'release' field
*
* A clock driver calls this function to register itself with the
* clock device subsystem. If 'clk' points to dynamically allocated
@@ -135,7 +138,7 @@ struct posix_clock {
*
* Returns zero on success, non-zero otherwise.
*/
-int posix_clock_register(struct posix_clock *clk, dev_t devid);
+int posix_clock_register(struct posix_clock *clk, struct device *dev);
/**
* posix_clock_unregister() - unregister a clock
diff --git a/kernel/time/posix-clock.c b/kernel/time/posix-clock.c
index e24008c098c6b..45a0a26023d4b 100644
--- a/kernel/time/posix-clock.c
+++ b/kernel/time/posix-clock.c
@@ -25,8 +25,6 @@
#include <linux/syscalls.h>
#include <linux/uaccess.h>
-static void delete_clock(struct kref *kref);
-
/*
* Returns NULL if the posix_clock instance attached to 'fp' is old and stale.
*/
@@ -168,7 +166,7 @@ static int posix_clock_open(struct inode *inode, struct file *fp)
err = 0;
if (!err) {
- kref_get(&clk->kref);
+ get_device(clk->dev);
fp->private_data = clk;
}
out:
@@ -184,7 +182,7 @@ static int posix_clock_release(struct inode *inode, struct file *fp)
if (clk->ops.release)
err = clk->ops.release(clk);
- kref_put(&clk->kref, delete_clock);
+ put_device(clk->dev);
fp->private_data = NULL;
@@ -206,38 +204,35 @@ static const struct file_operations posix_clock_file_operations = {
#endif
};
-int posix_clock_register(struct posix_clock *clk, dev_t devid)
+int posix_clock_register(struct posix_clock *clk, struct device *dev)
{
int err;
- kref_init(&clk->kref);
init_rwsem(&clk->rwsem);
cdev_init(&clk->cdev, &posix_clock_file_operations);
+ err = cdev_device_add(&clk->cdev, dev);
+ if (err) {
+ pr_err("%s unable to add device %d:%d\n",
+ dev_name(dev), MAJOR(dev->devt), MINOR(dev->devt));
+ return err;
+ }
clk->cdev.owner = clk->ops.owner;
- err = cdev_add(&clk->cdev, devid, 1);
+ clk->dev = dev;
- return err;
+ return 0;
}
EXPORT_SYMBOL_GPL(posix_clock_register);
-static void delete_clock(struct kref *kref)
-{
- struct posix_clock *clk = container_of(kref, struct posix_clock, kref);
-
- if (clk->release)
- clk->release(clk);
-}
-
void posix_clock_unregister(struct posix_clock *clk)
{
- cdev_del(&clk->cdev);
+ cdev_device_del(&clk->cdev, clk->dev);
down_write(&clk->rwsem);
clk->zombie = true;
up_write(&clk->rwsem);
- kref_put(&clk->kref, delete_clock);
+ put_device(clk->dev);
}
EXPORT_SYMBOL_GPL(posix_clock_unregister);
--
2.20.1
From: Vladis Dronov <[email protected]>
commit 75718584cb3c64e6269109d4d54f888ac5a5fd15 upstream.
There is a bug in ptp_clock_unregister(), where ptp_cleanup_pin_groups()
first frees ptp->pin_{,dev_}attr, but then posix_clock_unregister() needs
them to destroy a related sysfs device.
These functions can not be just swapped, as posix_clock_unregister() frees
ptp which is needed in the ptp_cleanup_pin_groups(). Fix this by calling
ptp_cleanup_pin_groups() in ptp_clock_release(), right before ptp is freed.
This makes this patch fix an UAF bug in a patch which fixes an UAF bug.
Reported-by: Antti Laakso <[email protected]>
Fixes: a33121e5487b ("ptp: fix the race between the release of ptp_clock and cdev")
Link: https://lore.kernel.org/netdev/[email protected]/
Signed-off-by: Vladis Dronov <[email protected]>
Acked-by: Richard Cochran <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Ben Hutchings <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/ptp/ptp_clock.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/ptp/ptp_clock.c b/drivers/ptp/ptp_clock.c
index 2c1ae324da182..bf1536f1c90bb 100644
--- a/drivers/ptp/ptp_clock.c
+++ b/drivers/ptp/ptp_clock.c
@@ -175,6 +175,7 @@ static void ptp_clock_release(struct device *dev)
{
struct ptp_clock *ptp = container_of(dev, struct ptp_clock, dev);
+ ptp_cleanup_pin_groups(ptp);
mutex_destroy(&ptp->tsevq_mux);
mutex_destroy(&ptp->pincfg_mux);
ida_simple_remove(&ptp_clocks_map, ptp->index);
@@ -276,9 +277,8 @@ int ptp_clock_unregister(struct ptp_clock *ptp)
if (ptp->pps_source)
pps_unregister_source(ptp->pps_source);
- ptp_cleanup_pin_groups(ptp);
-
posix_clock_unregister(&ptp->clock);
+
return 0;
}
EXPORT_SYMBOL(ptp_clock_unregister);
--
2.20.1
From: Steven Rostedt (VMware) <[email protected]>
commit 11f5efc3ab66284f7aaacc926e9351d658e2577b upstream.
x86_64 lazily maps in the vmalloc pages, and the way this works with per_cpu
areas can be complex, to say the least. Mappings may happen at boot up, and
if nothing synchronizes the page tables, those page mappings may not be
synced till they are used. This causes issues for anything that might touch
one of those mappings in the path of the page fault handler. When one of
those unmapped mappings is touched in the page fault handler, it will cause
another page fault, which in turn will cause a page fault, and leave us in
a loop of page faults.
Commit 763802b53a42 ("x86/mm: split vmalloc_sync_all()") split
vmalloc_sync_all() into vmalloc_sync_unmappings() and
vmalloc_sync_mappings(), as on system exit, it did not need to do a full
sync on x86_64 (although it still needed to be done on x86_32). By chance,
the vmalloc_sync_all() would synchronize the page mappings done at boot up
and prevent the per cpu area from being a problem for tracing in the page
fault handler. But when that synchronization in the exit of a task became a
nop, it caused the problem to appear.
Link: https://lore.kernel.org/r/[email protected]
Cc: [email protected]
Fixes: 737223fbca3b1 ("tracing: Consolidate buffer allocation code")
Reported-by: "Tzvetomir Stoyanov (VMware)" <[email protected]>
Suggested-by: Joerg Roedel <[email protected]>
Signed-off-by: Steven Rostedt (VMware) <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
kernel/trace/trace.c | 13 +++++++++++++
1 file changed, 13 insertions(+)
--- a/kernel/trace/trace.c
+++ b/kernel/trace/trace.c
@@ -7032,6 +7032,19 @@ static int allocate_trace_buffers(struct
*/
allocate_snapshot = false;
#endif
+
+ /*
+ * Because of some magic with the way alloc_percpu() works on
+ * x86_64, we need to synchronize the pgd of all the tables,
+ * otherwise the trace events that happen in x86_64 page fault
+ * handlers can't cope with accessing the chance that a
+ * alloc_percpu()'d memory might be touched in the page fault trace
+ * event. Oh, and we need to audit all other alloc_percpu() and vmalloc()
+ * calls in tracing, because something might get triggered within a
+ * page fault trace event!
+ */
+ vmalloc_sync_mappings();
+
return 0;
}
From: Eric Dumazet <[email protected]>
[ Upstream commit 14695212d4cd8b0c997f6121b6df8520038ce076 ]
My intent was to not let users set a zero drop_batch_size,
it seems I once again messed with min()/max().
Fixes: 9d18562a2278 ("fq_codel: add batch ability to fq_codel_drop()")
Signed-off-by: Eric Dumazet <[email protected]>
Acked-by: Toke Høiland-Jørgensen <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/sched/sch_fq_codel.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/net/sched/sch_fq_codel.c
+++ b/net/sched/sch_fq_codel.c
@@ -428,7 +428,7 @@ static int fq_codel_change(struct Qdisc
q->quantum = max(256U, nla_get_u32(tb[TCA_FQ_CODEL_QUANTUM]));
if (tb[TCA_FQ_CODEL_DROP_BATCH_SIZE])
- q->drop_batch_size = min(1U, nla_get_u32(tb[TCA_FQ_CODEL_DROP_BATCH_SIZE]));
+ q->drop_batch_size = max(1U, nla_get_u32(tb[TCA_FQ_CODEL_DROP_BATCH_SIZE]));
if (tb[TCA_FQ_CODEL_MEMORY_LIMIT])
q->memory_limit = min(1U << 31, nla_get_u32(tb[TCA_FQ_CODEL_MEMORY_LIMIT]));
From: Jan Kara <[email protected]>
commit c780e86dd48ef6467a1146cf7d0fe1e05a635039 upstream.
KASAN is reporting that __blk_add_trace() has a use-after-free issue
when accessing q->blk_trace. Indeed the switching of block tracing (and
thus eventual freeing of q->blk_trace) is completely unsynchronized with
the currently running tracing and thus it can happen that the blk_trace
structure is being freed just while __blk_add_trace() works on it.
Protect accesses to q->blk_trace by RCU during tracing and make sure we
wait for the end of RCU grace period when shutting down tracing. Luckily
that is rare enough event that we can afford that. Note that postponing
the freeing of blk_trace to an RCU callback should better be avoided as
it could have unexpected user visible side-effects as debugfs files
would be still existing for a short while block tracing has been shut
down.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=205711
CC: [email protected]
Reviewed-by: Chaitanya Kulkarni <[email protected]>
Reviewed-by: Ming Lei <[email protected]>
Tested-by: Ming Lei <[email protected]>
Reviewed-by: Bart Van Assche <[email protected]>
Reported-by: Tristan Madani <[email protected]>
Signed-off-by: Jan Kara <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
[bwh: Backported to 4.9: adjust context]
Signed-off-by: Ben Hutchings <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
include/linux/blkdev.h | 2 +-
include/linux/blktrace_api.h | 18 ++++--
kernel/trace/blktrace.c | 110 +++++++++++++++++++++++++----------
3 files changed, 94 insertions(+), 36 deletions(-)
diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h
index a8dfbad42d1b0..060881478e59e 100644
--- a/include/linux/blkdev.h
+++ b/include/linux/blkdev.h
@@ -445,7 +445,7 @@ struct request_queue {
unsigned int sg_reserved_size;
int node;
#ifdef CONFIG_BLK_DEV_IO_TRACE
- struct blk_trace *blk_trace;
+ struct blk_trace __rcu *blk_trace;
struct mutex blk_trace_mutex;
#endif
/*
diff --git a/include/linux/blktrace_api.h b/include/linux/blktrace_api.h
index cceb72f9e29f5..45fb00427306f 100644
--- a/include/linux/blktrace_api.h
+++ b/include/linux/blktrace_api.h
@@ -51,18 +51,26 @@ void __trace_note_message(struct blk_trace *, const char *fmt, ...);
**/
#define blk_add_trace_msg(q, fmt, ...) \
do { \
- struct blk_trace *bt = (q)->blk_trace; \
+ struct blk_trace *bt; \
+ \
+ rcu_read_lock(); \
+ bt = rcu_dereference((q)->blk_trace); \
if (unlikely(bt)) \
__trace_note_message(bt, fmt, ##__VA_ARGS__); \
+ rcu_read_unlock(); \
} while (0)
#define BLK_TN_MAX_MSG 128
static inline bool blk_trace_note_message_enabled(struct request_queue *q)
{
- struct blk_trace *bt = q->blk_trace;
- if (likely(!bt))
- return false;
- return bt->act_mask & BLK_TC_NOTIFY;
+ struct blk_trace *bt;
+ bool ret;
+
+ rcu_read_lock();
+ bt = rcu_dereference(q->blk_trace);
+ ret = bt && (bt->act_mask & BLK_TC_NOTIFY);
+ rcu_read_unlock();
+ return ret;
}
extern void blk_add_driver_data(struct request_queue *q, struct request *rq,
diff --git a/kernel/trace/blktrace.c b/kernel/trace/blktrace.c
index a88e677c74f31..78a896acd21ac 100644
--- a/kernel/trace/blktrace.c
+++ b/kernel/trace/blktrace.c
@@ -325,6 +325,7 @@ static void put_probe_ref(void)
static void blk_trace_cleanup(struct blk_trace *bt)
{
+ synchronize_rcu();
blk_trace_free(bt);
put_probe_ref();
}
@@ -629,8 +630,10 @@ static int compat_blk_trace_setup(struct request_queue *q, char *name,
static int __blk_trace_startstop(struct request_queue *q, int start)
{
int ret;
- struct blk_trace *bt = q->blk_trace;
+ struct blk_trace *bt;
+ bt = rcu_dereference_protected(q->blk_trace,
+ lockdep_is_held(&q->blk_trace_mutex));
if (bt == NULL)
return -EINVAL;
@@ -739,8 +742,8 @@ int blk_trace_ioctl(struct block_device *bdev, unsigned cmd, char __user *arg)
void blk_trace_shutdown(struct request_queue *q)
{
mutex_lock(&q->blk_trace_mutex);
-
- if (q->blk_trace) {
+ if (rcu_dereference_protected(q->blk_trace,
+ lockdep_is_held(&q->blk_trace_mutex))) {
__blk_trace_startstop(q, 0);
__blk_trace_remove(q);
}
@@ -766,10 +769,14 @@ void blk_trace_shutdown(struct request_queue *q)
static void blk_add_trace_rq(struct request_queue *q, struct request *rq,
unsigned int nr_bytes, u32 what)
{
- struct blk_trace *bt = q->blk_trace;
+ struct blk_trace *bt;
- if (likely(!bt))
+ rcu_read_lock();
+ bt = rcu_dereference(q->blk_trace);
+ if (likely(!bt)) {
+ rcu_read_unlock();
return;
+ }
if (rq->cmd_type == REQ_TYPE_BLOCK_PC) {
what |= BLK_TC_ACT(BLK_TC_PC);
@@ -780,6 +787,7 @@ static void blk_add_trace_rq(struct request_queue *q, struct request *rq,
__blk_add_trace(bt, blk_rq_pos(rq), nr_bytes, req_op(rq),
rq->cmd_flags, what, rq->errors, 0, NULL);
}
+ rcu_read_unlock();
}
static void blk_add_trace_rq_abort(void *ignore,
@@ -829,13 +837,18 @@ static void blk_add_trace_rq_complete(void *ignore,
static void blk_add_trace_bio(struct request_queue *q, struct bio *bio,
u32 what, int error)
{
- struct blk_trace *bt = q->blk_trace;
+ struct blk_trace *bt;
- if (likely(!bt))
+ rcu_read_lock();
+ bt = rcu_dereference(q->blk_trace);
+ if (likely(!bt)) {
+ rcu_read_unlock();
return;
+ }
__blk_add_trace(bt, bio->bi_iter.bi_sector, bio->bi_iter.bi_size,
bio_op(bio), bio->bi_opf, what, error, 0, NULL);
+ rcu_read_unlock();
}
static void blk_add_trace_bio_bounce(void *ignore,
@@ -880,11 +893,14 @@ static void blk_add_trace_getrq(void *ignore,
if (bio)
blk_add_trace_bio(q, bio, BLK_TA_GETRQ, 0);
else {
- struct blk_trace *bt = q->blk_trace;
+ struct blk_trace *bt;
+ rcu_read_lock();
+ bt = rcu_dereference(q->blk_trace);
if (bt)
__blk_add_trace(bt, 0, 0, rw, 0, BLK_TA_GETRQ, 0, 0,
NULL);
+ rcu_read_unlock();
}
}
@@ -896,27 +912,35 @@ static void blk_add_trace_sleeprq(void *ignore,
if (bio)
blk_add_trace_bio(q, bio, BLK_TA_SLEEPRQ, 0);
else {
- struct blk_trace *bt = q->blk_trace;
+ struct blk_trace *bt;
+ rcu_read_lock();
+ bt = rcu_dereference(q->blk_trace);
if (bt)
__blk_add_trace(bt, 0, 0, rw, 0, BLK_TA_SLEEPRQ,
0, 0, NULL);
+ rcu_read_unlock();
}
}
static void blk_add_trace_plug(void *ignore, struct request_queue *q)
{
- struct blk_trace *bt = q->blk_trace;
+ struct blk_trace *bt;
+ rcu_read_lock();
+ bt = rcu_dereference(q->blk_trace);
if (bt)
__blk_add_trace(bt, 0, 0, 0, 0, BLK_TA_PLUG, 0, 0, NULL);
+ rcu_read_unlock();
}
static void blk_add_trace_unplug(void *ignore, struct request_queue *q,
unsigned int depth, bool explicit)
{
- struct blk_trace *bt = q->blk_trace;
+ struct blk_trace *bt;
+ rcu_read_lock();
+ bt = rcu_dereference(q->blk_trace);
if (bt) {
__be64 rpdu = cpu_to_be64(depth);
u32 what;
@@ -928,14 +952,17 @@ static void blk_add_trace_unplug(void *ignore, struct request_queue *q,
__blk_add_trace(bt, 0, 0, 0, 0, what, 0, sizeof(rpdu), &rpdu);
}
+ rcu_read_unlock();
}
static void blk_add_trace_split(void *ignore,
struct request_queue *q, struct bio *bio,
unsigned int pdu)
{
- struct blk_trace *bt = q->blk_trace;
+ struct blk_trace *bt;
+ rcu_read_lock();
+ bt = rcu_dereference(q->blk_trace);
if (bt) {
__be64 rpdu = cpu_to_be64(pdu);
@@ -944,6 +971,7 @@ static void blk_add_trace_split(void *ignore,
BLK_TA_SPLIT, bio->bi_error, sizeof(rpdu),
&rpdu);
}
+ rcu_read_unlock();
}
/**
@@ -963,11 +991,15 @@ static void blk_add_trace_bio_remap(void *ignore,
struct request_queue *q, struct bio *bio,
dev_t dev, sector_t from)
{
- struct blk_trace *bt = q->blk_trace;
+ struct blk_trace *bt;
struct blk_io_trace_remap r;
- if (likely(!bt))
+ rcu_read_lock();
+ bt = rcu_dereference(q->blk_trace);
+ if (likely(!bt)) {
+ rcu_read_unlock();
return;
+ }
r.device_from = cpu_to_be32(dev);
r.device_to = cpu_to_be32(bio->bi_bdev->bd_dev);
@@ -976,6 +1008,7 @@ static void blk_add_trace_bio_remap(void *ignore,
__blk_add_trace(bt, bio->bi_iter.bi_sector, bio->bi_iter.bi_size,
bio_op(bio), bio->bi_opf, BLK_TA_REMAP, bio->bi_error,
sizeof(r), &r);
+ rcu_read_unlock();
}
/**
@@ -996,11 +1029,15 @@ static void blk_add_trace_rq_remap(void *ignore,
struct request *rq, dev_t dev,
sector_t from)
{
- struct blk_trace *bt = q->blk_trace;
+ struct blk_trace *bt;
struct blk_io_trace_remap r;
- if (likely(!bt))
+ rcu_read_lock();
+ bt = rcu_dereference(q->blk_trace);
+ if (likely(!bt)) {
+ rcu_read_unlock();
return;
+ }
r.device_from = cpu_to_be32(dev);
r.device_to = cpu_to_be32(disk_devt(rq->rq_disk));
@@ -1009,6 +1046,7 @@ static void blk_add_trace_rq_remap(void *ignore,
__blk_add_trace(bt, blk_rq_pos(rq), blk_rq_bytes(rq),
rq_data_dir(rq), 0, BLK_TA_REMAP, !!rq->errors,
sizeof(r), &r);
+ rcu_read_unlock();
}
/**
@@ -1026,10 +1064,14 @@ void blk_add_driver_data(struct request_queue *q,
struct request *rq,
void *data, size_t len)
{
- struct blk_trace *bt = q->blk_trace;
+ struct blk_trace *bt;
- if (likely(!bt))
+ rcu_read_lock();
+ bt = rcu_dereference(q->blk_trace);
+ if (likely(!bt)) {
+ rcu_read_unlock();
return;
+ }
if (rq->cmd_type == REQ_TYPE_BLOCK_PC)
__blk_add_trace(bt, 0, blk_rq_bytes(rq), 0, 0,
@@ -1037,6 +1079,7 @@ void blk_add_driver_data(struct request_queue *q,
else
__blk_add_trace(bt, blk_rq_pos(rq), blk_rq_bytes(rq), 0, 0,
BLK_TA_DRV_DATA, rq->errors, len, data);
+ rcu_read_unlock();
}
EXPORT_SYMBOL_GPL(blk_add_driver_data);
@@ -1529,6 +1572,7 @@ static int blk_trace_remove_queue(struct request_queue *q)
return -EINVAL;
put_probe_ref();
+ synchronize_rcu();
blk_trace_free(bt);
return 0;
}
@@ -1690,6 +1734,7 @@ static ssize_t sysfs_blk_trace_attr_show(struct device *dev,
struct hd_struct *p = dev_to_part(dev);
struct request_queue *q;
struct block_device *bdev;
+ struct blk_trace *bt;
ssize_t ret = -ENXIO;
bdev = bdget(part_devt(p));
@@ -1702,21 +1747,23 @@ static ssize_t sysfs_blk_trace_attr_show(struct device *dev,
mutex_lock(&q->blk_trace_mutex);
+ bt = rcu_dereference_protected(q->blk_trace,
+ lockdep_is_held(&q->blk_trace_mutex));
if (attr == &dev_attr_enable) {
- ret = sprintf(buf, "%u\n", !!q->blk_trace);
+ ret = sprintf(buf, "%u\n", !!bt);
goto out_unlock_bdev;
}
- if (q->blk_trace == NULL)
+ if (bt == NULL)
ret = sprintf(buf, "disabled\n");
else if (attr == &dev_attr_act_mask)
- ret = blk_trace_mask2str(buf, q->blk_trace->act_mask);
+ ret = blk_trace_mask2str(buf, bt->act_mask);
else if (attr == &dev_attr_pid)
- ret = sprintf(buf, "%u\n", q->blk_trace->pid);
+ ret = sprintf(buf, "%u\n", bt->pid);
else if (attr == &dev_attr_start_lba)
- ret = sprintf(buf, "%llu\n", q->blk_trace->start_lba);
+ ret = sprintf(buf, "%llu\n", bt->start_lba);
else if (attr == &dev_attr_end_lba)
- ret = sprintf(buf, "%llu\n", q->blk_trace->end_lba);
+ ret = sprintf(buf, "%llu\n", bt->end_lba);
out_unlock_bdev:
mutex_unlock(&q->blk_trace_mutex);
@@ -1733,6 +1780,7 @@ static ssize_t sysfs_blk_trace_attr_store(struct device *dev,
struct block_device *bdev;
struct request_queue *q;
struct hd_struct *p;
+ struct blk_trace *bt;
u64 value;
ssize_t ret = -EINVAL;
@@ -1763,8 +1811,10 @@ static ssize_t sysfs_blk_trace_attr_store(struct device *dev,
mutex_lock(&q->blk_trace_mutex);
+ bt = rcu_dereference_protected(q->blk_trace,
+ lockdep_is_held(&q->blk_trace_mutex));
if (attr == &dev_attr_enable) {
- if (!!value == !!q->blk_trace) {
+ if (!!value == !!bt) {
ret = 0;
goto out_unlock_bdev;
}
@@ -1776,18 +1826,18 @@ static ssize_t sysfs_blk_trace_attr_store(struct device *dev,
}
ret = 0;
- if (q->blk_trace == NULL)
+ if (bt == NULL)
ret = blk_trace_setup_queue(q, bdev);
if (ret == 0) {
if (attr == &dev_attr_act_mask)
- q->blk_trace->act_mask = value;
+ bt->act_mask = value;
else if (attr == &dev_attr_pid)
- q->blk_trace->pid = value;
+ bt->pid = value;
else if (attr == &dev_attr_start_lba)
- q->blk_trace->start_lba = value;
+ bt->start_lba = value;
else if (attr == &dev_attr_end_lba)
- q->blk_trace->end_lba = value;
+ bt->end_lba = value;
}
out_unlock_bdev:
--
2.20.1
From: Xiyu Yang <[email protected]>
commit 6f91a3f7af4186099dd10fa530dd7e0d9c29747d upstream.
batadv_v_ogm_process() invokes batadv_hardif_neigh_get(), which returns
a reference of the neighbor object to "hardif_neigh" with increased
refcount.
When batadv_v_ogm_process() returns, "hardif_neigh" becomes invalid, so
the refcount should be decreased to keep refcount balanced.
The reference counting issue happens in one exception handling paths of
batadv_v_ogm_process(). When batadv_v_ogm_orig_get() fails to get the
orig node and returns NULL, the refcnt increased by
batadv_hardif_neigh_get() is not decreased, causing a refcnt leak.
Fix this issue by jumping to "out" label when batadv_v_ogm_orig_get()
fails to get the orig node.
Fixes: 9323158ef9f4 ("batman-adv: OGMv2 - implement originators logic")
Signed-off-by: Xiyu Yang <[email protected]>
Signed-off-by: Xin Tan <[email protected]>
Signed-off-by: Sven Eckelmann <[email protected]>
Signed-off-by: Simon Wunderlich <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/batman-adv/bat_v_ogm.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/net/batman-adv/bat_v_ogm.c
+++ b/net/batman-adv/bat_v_ogm.c
@@ -709,7 +709,7 @@ static void batadv_v_ogm_process(const s
orig_node = batadv_v_ogm_orig_get(bat_priv, ogm_packet->orig);
if (!orig_node)
- return;
+ goto out;
neigh_node = batadv_neigh_node_get_or_create(orig_node, if_incoming,
ethhdr->h_source);
From: Hans de Goede <[email protected]>
commit fd25ea29093e275195d0ae8b2573021a1c98959f upstream.
Revert commit 6276e53fa8c0 (ACPI / video: Add force_native quirk for
HP Pavilion dv6).
In the commit message for the quirk this revert removes I wrote:
"Note that there are quite a few HP Pavilion dv6 variants, some
woth ATI and some with NVIDIA hybrid gfx, both seem to need this
quirk to have working backlight control. There are also some versions
with only Intel integrated gfx, these may not need this quirk, but it
should not hurt there."
Unfortunately that seems wrong, I've already received 2 reports of
this commit causing regressions on some dv6 variants (at least one
of which actually has a nvidia GPU). So it seems that HP has made a
mess here by using the same model-name both in marketing and in the
DMI data for many different variants. Some of which need
acpi_backlight=native for functional backlight control (as the
quirk this commit reverts was doing), where as others are broken by
it. So lets get back to the old sitation so as to avoid regressing
on models which used to work without any kernel cmdline arguments
before.
Fixes: 6276e53fa8c0 (ACPI / video: Add force_native quirk for HP Pavilion dv6)
Signed-off-by: Hans de Goede <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
Cc: Guenter Roeck <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/acpi/video_detect.c | 11 -----------
1 file changed, 11 deletions(-)
--- a/drivers/acpi/video_detect.c
+++ b/drivers/acpi/video_detect.c
@@ -314,17 +314,6 @@ static const struct dmi_system_id video_
DMI_MATCH(DMI_PRODUCT_NAME, "Dell System XPS L702X"),
},
},
- {
- /* https://bugzilla.redhat.com/show_bug.cgi?id=1204476 */
- /* https://bugs.launchpad.net/ubuntu/+source/linux-lts-trusty/+bug/1416940 */
- .callback = video_detect_force_native,
- .ident = "HP Pavilion dv6",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
- DMI_MATCH(DMI_PRODUCT_NAME, "HP Pavilion dv6 Notebook PC"),
- },
- },
-
{ },
};
From: Julia Lawall <[email protected]>
[ Upstream commit 865308373ed49c9fb05720d14cbf1315349b32a9 ]
In this code, it appears that phyter_clocks is a list head, based on
the previous list_for_each, and that clock->list is intended to be a
list element, given that it has just been initialized in
dp83640_clock_init. Accordingly, switch the arguments to
list_add_tail, which takes the list head as the second argument.
Fixes: cb646e2b02b27 ("ptp: Added a clock driver for the National Semiconductor PHYTER.")
Signed-off-by: Julia Lawall <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/phy/dp83640.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/net/phy/dp83640.c
+++ b/drivers/net/phy/dp83640.c
@@ -1108,7 +1108,7 @@ static struct dp83640_clock *dp83640_clo
goto out;
}
dp83640_clock_init(clock, bus);
- list_add_tail(&phyter_clocks, &clock->list);
+ list_add_tail(&clock->list, &phyter_clocks);
out:
mutex_unlock(&phyter_clocks_lock);
From: Cengiz Can <[email protected]>
commit 153031a301bb07194e9c37466cfce8eacb977621 upstream.
There was a recent change in blktrace.c that added a RCU protection to
`q->blk_trace` in order to fix a use-after-free issue during access.
However the change missed an edge case that can lead to dereferencing of
`bt` pointer even when it's NULL:
Coverity static analyzer marked this as a FORWARD_NULL issue with CID
1460458.
```
/kernel/trace/blktrace.c: 1904 in sysfs_blk_trace_attr_store()
1898 ret = 0;
1899 if (bt == NULL)
1900 ret = blk_trace_setup_queue(q, bdev);
1901
1902 if (ret == 0) {
1903 if (attr == &dev_attr_act_mask)
>>> CID 1460458: Null pointer dereferences (FORWARD_NULL)
>>> Dereferencing null pointer "bt".
1904 bt->act_mask = value;
1905 else if (attr == &dev_attr_pid)
1906 bt->pid = value;
1907 else if (attr == &dev_attr_start_lba)
1908 bt->start_lba = value;
1909 else if (attr == &dev_attr_end_lba)
```
Added a reassignment with RCU annotation to fix the issue.
Fixes: c780e86dd48 ("blktrace: Protect q->blk_trace with RCU")
Reviewed-by: Ming Lei <[email protected]>
Reviewed-by: Bob Liu <[email protected]>
Reviewed-by: Steven Rostedt (VMware) <[email protected]>
Signed-off-by: Cengiz Can <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
Signed-off-by: Ben Hutchings <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
kernel/trace/blktrace.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/kernel/trace/blktrace.c b/kernel/trace/blktrace.c
index 78a896acd21ac..6d3b432a748a6 100644
--- a/kernel/trace/blktrace.c
+++ b/kernel/trace/blktrace.c
@@ -1826,8 +1826,11 @@ static ssize_t sysfs_blk_trace_attr_store(struct device *dev,
}
ret = 0;
- if (bt == NULL)
+ if (bt == NULL) {
ret = blk_trace_setup_queue(q, bdev);
+ bt = rcu_dereference_protected(q->blk_trace,
+ lockdep_is_held(&q->blk_trace_mutex));
+ }
if (ret == 0) {
if (attr == &dev_attr_act_mask)
--
2.20.1
From: George Spelvin <[email protected]>
commit fd0c42c4dea54335967c5a86f15fc064235a2797 upstream.
and change to pseudorandom numbers, as this is a traffic dithering
operation that doesn't need crypto-grade.
The previous code operated in 4 steps:
1. Generate a random byte 0 <= rand_tq <= 255
2. Multiply it by BATADV_TQ_MAX_VALUE - tq
3. Divide by 255 (= BATADV_TQ_MAX_VALUE)
4. Return BATADV_TQ_MAX_VALUE - rand_tq
This would apperar to scale (BATADV_TQ_MAX_VALUE - tq) by a random
value between 0/255 and 255/255.
But! The intermediate value between steps 3 and 4 is stored in a u8
variable. So it's truncated, and most of the time, is less than 255, after
which the division produces 0. Specifically, if tq is odd, the product is
always even, and can never be 255. If tq is even, there's exactly one
random byte value that will produce a product byte of 255.
Thus, the return value is 255 (511/512 of the time) or 254 (1/512
of the time).
If we assume that the truncation is a bug, and the code is meant to scale
the input, a simpler way of looking at it is that it's returning a random
value between tq and BATADV_TQ_MAX_VALUE, inclusive.
Well, we have an optimized function for doing just that.
Fixes: 3c12de9a5c75 ("batman-adv: network coding - code and transmit packets if possible")
Signed-off-by: George Spelvin <[email protected]>
Signed-off-by: Sven Eckelmann <[email protected]>
Signed-off-by: Simon Wunderlich <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/batman-adv/network-coding.c | 9 +--------
1 file changed, 1 insertion(+), 8 deletions(-)
--- a/net/batman-adv/network-coding.c
+++ b/net/batman-adv/network-coding.c
@@ -1012,15 +1012,8 @@ static struct batadv_nc_path *batadv_nc_
*/
static u8 batadv_nc_random_weight_tq(u8 tq)
{
- u8 rand_val, rand_tq;
-
- get_random_bytes(&rand_val, sizeof(rand_val));
-
/* randomize the estimated packet loss (max TQ - estimated TQ) */
- rand_tq = rand_val * (BATADV_TQ_MAX_VALUE - tq);
-
- /* normalize the randomized packet loss */
- rand_tq /= BATADV_TQ_MAX_VALUE;
+ u8 rand_tq = prandom_u32_max(BATADV_TQ_MAX_VALUE + 1 - tq);
/* convert to (randomized) estimated tq again */
return BATADV_TQ_MAX_VALUE - rand_tq;
From: Kees Cook <[email protected]>
commit bbdc6076d2e5d07db44e74c11b01a3e27ab90b32 upstream.
Commmit eab09532d400 ("binfmt_elf: use ELF_ET_DYN_BASE only for PIE"),
made changes in the rare case when the ELF loader was directly invoked
(e.g to set a non-inheritable LD_LIBRARY_PATH, testing new versions of
the loader), by moving into the mmap region to avoid both ET_EXEC and
PIE binaries. This had the effect of also moving the brk region into
mmap, which could lead to the stack and brk being arbitrarily close to
each other. An unlucky process wouldn't get its requested stack size
and stack allocations could end up scribbling on the heap.
This is illustrated here. In the case of using the loader directly, brk
(so helpfully identified as "[heap]") is allocated with the _loader_ not
the binary. For example, with ASLR entirely disabled, you can see this
more clearly:
$ /bin/cat /proc/self/maps
555555554000-55555555c000 r-xp 00000000 ... /bin/cat
55555575b000-55555575c000 r--p 00007000 ... /bin/cat
55555575c000-55555575d000 rw-p 00008000 ... /bin/cat
55555575d000-55555577e000 rw-p 00000000 ... [heap]
...
7ffff7ff7000-7ffff7ffa000 r--p 00000000 ... [vvar]
7ffff7ffa000-7ffff7ffc000 r-xp 00000000 ... [vdso]
7ffff7ffc000-7ffff7ffd000 r--p 00027000 ... /lib/x86_64-linux-gnu/ld-2.27.so
7ffff7ffd000-7ffff7ffe000 rw-p 00028000 ... /lib/x86_64-linux-gnu/ld-2.27.so
7ffff7ffe000-7ffff7fff000 rw-p 00000000 ...
7ffffffde000-7ffffffff000 rw-p 00000000 ... [stack]
$ /lib/x86_64-linux-gnu/ld-2.27.so /bin/cat /proc/self/maps
...
7ffff7bcc000-7ffff7bd4000 r-xp 00000000 ... /bin/cat
7ffff7bd4000-7ffff7dd3000 ---p 00008000 ... /bin/cat
7ffff7dd3000-7ffff7dd4000 r--p 00007000 ... /bin/cat
7ffff7dd4000-7ffff7dd5000 rw-p 00008000 ... /bin/cat
7ffff7dd5000-7ffff7dfc000 r-xp 00000000 ... /lib/x86_64-linux-gnu/ld-2.27.so
7ffff7fb2000-7ffff7fd6000 rw-p 00000000 ...
7ffff7ff7000-7ffff7ffa000 r--p 00000000 ... [vvar]
7ffff7ffa000-7ffff7ffc000 r-xp 00000000 ... [vdso]
7ffff7ffc000-7ffff7ffd000 r--p 00027000 ... /lib/x86_64-linux-gnu/ld-2.27.so
7ffff7ffd000-7ffff7ffe000 rw-p 00028000 ... /lib/x86_64-linux-gnu/ld-2.27.so
7ffff7ffe000-7ffff8020000 rw-p 00000000 ... [heap]
7ffffffde000-7ffffffff000 rw-p 00000000 ... [stack]
The solution is to move brk out of mmap and into ELF_ET_DYN_BASE since
nothing is there in the direct loader case (and ET_EXEC is still far
away at 0x400000). Anything that ran before should still work (i.e.
the ultimately-launched binary already had the brk very far from its
text, so this should be no different from a COMPAT_BRK standpoint). The
only risk I see here is that if someone started to suddenly depend on
the entire memory space lower than the mmap region being available when
launching binaries via a direct loader execs which seems highly
unlikely, I'd hope: this would mean a binary would _not_ work when
exec()ed normally.
(Note that this is only done under CONFIG_ARCH_HAS_ELF_RANDOMIZATION
when randomization is turned on.)
Link: http://lkml.kernel.org/r/20190422225727.GA21011@beast
Link: https://lkml.kernel.org/r/CAGXu5jJ5sj3emOT2QPxQkNQk0qbU6zEfu9=Omfhx_p0nCKPSjA@mail.gmail.com
Fixes: eab09532d400 ("binfmt_elf: use ELF_ET_DYN_BASE only for PIE")
Signed-off-by: Kees Cook <[email protected]>
Reported-by: Ali Saidi <[email protected]>
Cc: Ali Saidi <[email protected]>
Cc: Guenter Roeck <[email protected]>
Cc: Michal Hocko <[email protected]>
Cc: Matthew Wilcox <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Jann Horn <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Cc: Guenter Roeck <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/binfmt_elf.c | 11 +++++++++++
1 file changed, 11 insertions(+)
--- a/fs/binfmt_elf.c
+++ b/fs/binfmt_elf.c
@@ -1100,6 +1100,17 @@ static int load_elf_binary(struct linux_
current->mm->start_stack = bprm->p;
if ((current->flags & PF_RANDOMIZE) && (randomize_va_space > 1)) {
+ /*
+ * For architectures with ELF randomization, when executing
+ * a loader directly (i.e. no interpreter listed in ELF
+ * headers), move the brk area out of the mmap region
+ * (since it grows up, and may collide early with the stack
+ * growing down), and into the unused ELF_ET_DYN_BASE region.
+ */
+ if (IS_ENABLED(CONFIG_ARCH_HAS_ELF_RANDOMIZE) && !interpreter)
+ current->mm->brk = current->mm->start_brk =
+ ELF_ET_DYN_BASE;
+
current->mm->brk = current->mm->start_brk =
arch_randomize_brk(current->mm);
#ifdef compat_brk_randomized
From: Ronnie Sahlberg <[email protected]>
[ Upstream commit f2caf901c1b7ce65f9e6aef4217e3241039db768 ]
There is a race condition with how we send (or supress and don't send)
smb echos that will cause the client to incorrectly think the
server is unresponsive and thus needs to be reconnected.
Summary of the race condition:
1) Daisy chaining scheduling creates a gap.
2) If traffic comes unfortunate shortly after
the last echo, the planned echo is suppressed.
3) Due to the gap, the next echo transmission is delayed
until after the timeout, which is set hard to twice
the echo interval.
This is fixed by changing the timeouts from 2 to three times the echo interval.
Detailed description of the bug: https://lutz.donnerhacke.de/eng/Blog/Groundhog-Day-with-SMB-remount
Signed-off-by: Ronnie Sahlberg <[email protected]>
Reviewed-by: Pavel Shilovsky <[email protected]>
Signed-off-by: Steve French <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/cifs/connect.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c
index 37c8cac86431f..3545b237187a8 100644
--- a/fs/cifs/connect.c
+++ b/fs/cifs/connect.c
@@ -551,10 +551,10 @@ static bool
server_unresponsive(struct TCP_Server_Info *server)
{
/*
- * We need to wait 2 echo intervals to make sure we handle such
+ * We need to wait 3 echo intervals to make sure we handle such
* situations right:
* 1s client sends a normal SMB request
- * 2s client gets a response
+ * 3s client gets a response
* 30s echo workqueue job pops, and decides we got a response recently
* and don't need to send another
* ...
@@ -563,9 +563,9 @@ server_unresponsive(struct TCP_Server_Info *server)
*/
if ((server->tcpStatus == CifsGood ||
server->tcpStatus == CifsNeedNegotiate) &&
- time_after(jiffies, server->lstrp + 2 * server->echo_interval)) {
+ time_after(jiffies, server->lstrp + 3 * server->echo_interval)) {
cifs_dbg(VFS, "Server %s has not responded in %lu seconds. Reconnecting...\n",
- server->hostname, (2 * server->echo_interval) / HZ);
+ server->hostname, (3 * server->echo_interval) / HZ);
cifs_reconnect(server);
wake_up(&server->response_q);
return true;
--
2.20.1
From: Dmitry Torokhov <[email protected]>
commit 85a66e55019583da1e0f18706b7a8281c9f6de5b upstream.
Let's switch to using device_create_with_groups(), which will allow us to
create "pins" attribute group together with the rest of ptp device
attributes, and before userspace gets notified about ptp device creation.
Signed-off-by: Dmitry Torokhov <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
[bwh: Backported to 4.9: adjust context]
Signed-off-by: Ben Hutchings <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/ptp/ptp_clock.c | 20 +++++++++++---------
drivers/ptp/ptp_private.h | 7 ++++---
drivers/ptp/ptp_sysfs.c | 39 +++++++++------------------------------
3 files changed, 24 insertions(+), 42 deletions(-)
diff --git a/drivers/ptp/ptp_clock.c b/drivers/ptp/ptp_clock.c
index 08f304b83ad13..d5ac33350889e 100644
--- a/drivers/ptp/ptp_clock.c
+++ b/drivers/ptp/ptp_clock.c
@@ -214,16 +214,17 @@ struct ptp_clock *ptp_clock_register(struct ptp_clock_info *info,
mutex_init(&ptp->pincfg_mux);
init_waitqueue_head(&ptp->tsev_wq);
+ err = ptp_populate_pin_groups(ptp);
+ if (err)
+ goto no_pin_groups;
+
/* Create a new device in our class. */
- ptp->dev = device_create(ptp_class, parent, ptp->devid, ptp,
- "ptp%d", ptp->index);
+ ptp->dev = device_create_with_groups(ptp_class, parent, ptp->devid,
+ ptp, ptp->pin_attr_groups,
+ "ptp%d", ptp->index);
if (IS_ERR(ptp->dev))
goto no_device;
- err = ptp_populate_sysfs(ptp);
- if (err)
- goto no_sysfs;
-
/* Register a new PPS source. */
if (info->pps) {
struct pps_source_info pps;
@@ -251,10 +252,10 @@ no_clock:
if (ptp->pps_source)
pps_unregister_source(ptp->pps_source);
no_pps:
- ptp_cleanup_sysfs(ptp);
-no_sysfs:
device_destroy(ptp_class, ptp->devid);
no_device:
+ ptp_cleanup_pin_groups(ptp);
+no_pin_groups:
mutex_destroy(&ptp->tsevq_mux);
mutex_destroy(&ptp->pincfg_mux);
ida_simple_remove(&ptp_clocks_map, index);
@@ -273,8 +274,9 @@ int ptp_clock_unregister(struct ptp_clock *ptp)
/* Release the clock's resources. */
if (ptp->pps_source)
pps_unregister_source(ptp->pps_source);
- ptp_cleanup_sysfs(ptp);
+
device_destroy(ptp_class, ptp->devid);
+ ptp_cleanup_pin_groups(ptp);
posix_clock_unregister(&ptp->clock);
return 0;
diff --git a/drivers/ptp/ptp_private.h b/drivers/ptp/ptp_private.h
index 9c5d41421b651..d95888974d0c6 100644
--- a/drivers/ptp/ptp_private.h
+++ b/drivers/ptp/ptp_private.h
@@ -54,6 +54,8 @@ struct ptp_clock {
struct device_attribute *pin_dev_attr;
struct attribute **pin_attr;
struct attribute_group pin_attr_group;
+ /* 1st entry is a pointer to the real group, 2nd is NULL terminator */
+ const struct attribute_group *pin_attr_groups[2];
};
/*
@@ -94,8 +96,7 @@ uint ptp_poll(struct posix_clock *pc,
extern const struct attribute_group *ptp_groups[];
-int ptp_cleanup_sysfs(struct ptp_clock *ptp);
-
-int ptp_populate_sysfs(struct ptp_clock *ptp);
+int ptp_populate_pin_groups(struct ptp_clock *ptp);
+void ptp_cleanup_pin_groups(struct ptp_clock *ptp);
#endif
diff --git a/drivers/ptp/ptp_sysfs.c b/drivers/ptp/ptp_sysfs.c
index a55a6eb4dfde9..731d0423c8aa7 100644
--- a/drivers/ptp/ptp_sysfs.c
+++ b/drivers/ptp/ptp_sysfs.c
@@ -268,25 +268,14 @@ static ssize_t ptp_pin_store(struct device *dev, struct device_attribute *attr,
return count;
}
-int ptp_cleanup_sysfs(struct ptp_clock *ptp)
+int ptp_populate_pin_groups(struct ptp_clock *ptp)
{
- struct device *dev = ptp->dev;
- struct ptp_clock_info *info = ptp->info;
-
- if (info->n_pins) {
- sysfs_remove_group(&dev->kobj, &ptp->pin_attr_group);
- kfree(ptp->pin_attr);
- kfree(ptp->pin_dev_attr);
- }
- return 0;
-}
-
-static int ptp_populate_pins(struct ptp_clock *ptp)
-{
- struct device *dev = ptp->dev;
struct ptp_clock_info *info = ptp->info;
int err = -ENOMEM, i, n_pins = info->n_pins;
+ if (!n_pins)
+ return 0;
+
ptp->pin_dev_attr = kzalloc(n_pins * sizeof(*ptp->pin_dev_attr),
GFP_KERNEL);
if (!ptp->pin_dev_attr)
@@ -310,28 +299,18 @@ static int ptp_populate_pins(struct ptp_clock *ptp)
ptp->pin_attr_group.name = "pins";
ptp->pin_attr_group.attrs = ptp->pin_attr;
- err = sysfs_create_group(&dev->kobj, &ptp->pin_attr_group);
- if (err)
- goto no_group;
+ ptp->pin_attr_groups[0] = &ptp->pin_attr_group;
+
return 0;
-no_group:
- kfree(ptp->pin_attr);
no_pin_attr:
kfree(ptp->pin_dev_attr);
no_dev_attr:
return err;
}
-int ptp_populate_sysfs(struct ptp_clock *ptp)
+void ptp_cleanup_pin_groups(struct ptp_clock *ptp)
{
- struct ptp_clock_info *info = ptp->info;
- int err;
-
- if (info->n_pins) {
- err = ptp_populate_pins(ptp);
- if (err)
- return err;
- }
- return 0;
+ kfree(ptp->pin_attr);
+ kfree(ptp->pin_dev_attr);
}
--
2.20.1
From: Scott Dial <[email protected]>
[ Upstream commit ab046a5d4be4c90a3952a0eae75617b49c0cb01b ]
MACsec decryption always occurs in a softirq context. Since
the FPU may not be usable in the softirq context, the call to
decrypt may be scheduled on the cryptd work queue. The cryptd
work queue does not provide ordering guarantees. Therefore,
preserving order requires masking out ASYNC implementations
of gcm(aes).
For instance, an Intel CPU with AES-NI makes available the
generic-gcm-aesni driver from the aesni_intel module to
implement gcm(aes). However, this implementation requires
the FPU, so it is not always available to use from a softirq
context, and will fallback to the cryptd work queue, which
does not preserve frame ordering. With this change, such a
system would select gcm_base(ctr(aes-aesni),ghash-generic).
While the aes-aesni implementation prefers to use the FPU, it
will fallback to the aes-asm implementation if unavailable.
By using a synchronous version of gcm(aes), the decryption
will complete before returning from crypto_aead_decrypt().
Therefore, the macsec_decrypt_done() callback will be called
before returning from macsec_decrypt(). Thus, the order of
calls to macsec_post_decrypt() for the frames is preserved.
While it's presumable that the pure AES-NI version of gcm(aes)
is more performant, the hybrid solution is capable of gigabit
speeds on modest hardware. Regardless, preserving the order
of frames is paramount for many network protocols (e.g.,
triggering TCP retries). Within the MACsec driver itself, the
replay protection is tripped by the out-of-order frames, and
can cause frames to be dropped.
This bug has been present in this code since it was added in
v4.6, however it may not have been noticed since not all CPUs
have FPU offload available. Additionally, the bug manifests
as occasional out-of-order packets that are easily
misattributed to other network phenomena.
When this code was added in v4.6, the crypto/gcm.c code did
not restrict selection of the ghash function based on the
ASYNC flag. For instance, x86 CPUs with PCLMULQDQ would
select the ghash-clmulni driver instead of ghash-generic,
which submits to the cryptd work queue if the FPU is busy.
However, this bug was was corrected in v4.8 by commit
b30bdfa86431afbafe15284a3ad5ac19b49b88e3, and was backported
all the way back to the v3.14 stable branch, so this patch
should be applicable back to the v4.6 stable branch.
Signed-off-by: Scott Dial <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/macsec.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/drivers/net/macsec.c
+++ b/drivers/net/macsec.c
@@ -1315,7 +1315,8 @@ static struct crypto_aead *macsec_alloc_
struct crypto_aead *tfm;
int ret;
- tfm = crypto_alloc_aead("gcm(aes)", 0, 0);
+ /* Pick a sync gcm(aes) cipher to ensure order is preserved. */
+ tfm = crypto_alloc_aead("gcm(aes)", 0, CRYPTO_ALG_ASYNC);
if (IS_ERR(tfm))
return tfm;
From: Xiyu Yang <[email protected]>
commit 6107c5da0fca8b50b4d3215e94d619d38cc4a18c upstream.
batadv_show_throughput_override() invokes batadv_hardif_get_by_netdev(),
which gets a batadv_hard_iface object from net_dev with increased refcnt
and its reference is assigned to a local pointer 'hard_iface'.
When batadv_store_throughput_override() returns, "hard_iface" becomes
invalid, so the refcount should be decreased to keep refcount balanced.
The issue happens in one error path of
batadv_store_throughput_override(). When batadv_parse_throughput()
returns NULL, the refcnt increased by batadv_hardif_get_by_netdev() is
not decreased, causing a refcnt leak.
Fix this issue by jumping to "out" label when batadv_parse_throughput()
returns NULL.
Fixes: 0b5ecc6811bd ("batman-adv: add throughput override attribute to hard_ifaces")
Signed-off-by: Xiyu Yang <[email protected]>
Signed-off-by: Xin Tan <[email protected]>
Signed-off-by: Sven Eckelmann <[email protected]>
Signed-off-by: Simon Wunderlich <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/batman-adv/sysfs.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/net/batman-adv/sysfs.c
+++ b/net/batman-adv/sysfs.c
@@ -1087,7 +1087,7 @@ static ssize_t batadv_store_throughput_o
ret = batadv_parse_throughput(net_dev, buff, "throughput_override",
&tp_override);
if (!ret)
- return count;
+ goto out;
old_tp_override = atomic_read(&hard_iface->bat_v.throughput_override);
if (old_tp_override == tp_override)
From: Tariq Toukan <[email protected]>
[ Upstream commit 40e473071dbad04316ddc3613c3a3d1c75458299 ]
When ENOSPC is set the idx is still valid and gets set to the global
MLX4_SINK_COUNTER_INDEX. However gcc's static analysis cannot tell that
ENOSPC is impossible from mlx4_cmd_imm() and gives this warning:
drivers/net/ethernet/mellanox/mlx4/main.c:2552:28: warning: 'idx' may be
used uninitialized in this function [-Wmaybe-uninitialized]
2552 | priv->def_counter[port] = idx;
Also, when ENOSPC is returned mlx4_allocate_default_counters should not
fail.
Fixes: 6de5f7f6a1fa ("net/mlx4_core: Allocate default counter per port")
Signed-off-by: Jason Gunthorpe <[email protected]>
Signed-off-by: Tariq Toukan <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/mellanox/mlx4/main.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
--- a/drivers/net/ethernet/mellanox/mlx4/main.c
+++ b/drivers/net/ethernet/mellanox/mlx4/main.c
@@ -2478,6 +2478,7 @@ static int mlx4_allocate_default_counter
if (!err || err == -ENOSPC) {
priv->def_counter[port] = idx;
+ err = 0;
} else if (err == -ENOENT) {
err = 0;
continue;
@@ -2527,7 +2528,8 @@ int mlx4_counter_alloc(struct mlx4_dev *
MLX4_CMD_TIME_CLASS_A, MLX4_CMD_WRAPPED);
if (!err)
*idx = get_param_l(&out_param);
-
+ if (WARN_ON(err == -ENOSPC))
+ err = -EINVAL;
return err;
}
return __mlx4_counter_alloc(dev, idx);
From: Eric Dumazet <[email protected]>
[ Upstream commit 8738c85c72b3108c9b9a369a39868ba5f8e10ae0 ]
If choke_init() could not allocate q->tab, we would crash later
in choke_reset().
BUG: KASAN: null-ptr-deref in memset include/linux/string.h:366 [inline]
BUG: KASAN: null-ptr-deref in choke_reset+0x208/0x340 net/sched/sch_choke.c:326
Write of size 8 at addr 0000000000000000 by task syz-executor822/7022
CPU: 1 PID: 7022 Comm: syz-executor822 Not tainted 5.7.0-rc1-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x188/0x20d lib/dump_stack.c:118
__kasan_report.cold+0x5/0x4d mm/kasan/report.c:515
kasan_report+0x33/0x50 mm/kasan/common.c:625
check_memory_region_inline mm/kasan/generic.c:187 [inline]
check_memory_region+0x141/0x190 mm/kasan/generic.c:193
memset+0x20/0x40 mm/kasan/common.c:85
memset include/linux/string.h:366 [inline]
choke_reset+0x208/0x340 net/sched/sch_choke.c:326
qdisc_reset+0x6b/0x520 net/sched/sch_generic.c:910
dev_deactivate_queue.constprop.0+0x13c/0x240 net/sched/sch_generic.c:1138
netdev_for_each_tx_queue include/linux/netdevice.h:2197 [inline]
dev_deactivate_many+0xe2/0xba0 net/sched/sch_generic.c:1195
dev_deactivate+0xf8/0x1c0 net/sched/sch_generic.c:1233
qdisc_graft+0xd25/0x1120 net/sched/sch_api.c:1051
tc_modify_qdisc+0xbab/0x1a00 net/sched/sch_api.c:1670
rtnetlink_rcv_msg+0x44e/0xad0 net/core/rtnetlink.c:5454
netlink_rcv_skb+0x15a/0x410 net/netlink/af_netlink.c:2469
netlink_unicast_kernel net/netlink/af_netlink.c:1303 [inline]
netlink_unicast+0x537/0x740 net/netlink/af_netlink.c:1329
netlink_sendmsg+0x882/0xe10 net/netlink/af_netlink.c:1918
sock_sendmsg_nosec net/socket.c:652 [inline]
sock_sendmsg+0xcf/0x120 net/socket.c:672
____sys_sendmsg+0x6bf/0x7e0 net/socket.c:2362
___sys_sendmsg+0x100/0x170 net/socket.c:2416
__sys_sendmsg+0xec/0x1b0 net/socket.c:2449
do_syscall_64+0xf6/0x7d0 arch/x86/entry/common.c:295
Fixes: 77e62da6e60c ("sch_choke: drop all packets in queue during reset")
Signed-off-by: Eric Dumazet <[email protected]>
Reported-by: syzbot <[email protected]>
Cc: Cong Wang <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/sched/sch_choke.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/net/sched/sch_choke.c
+++ b/net/sched/sch_choke.c
@@ -382,7 +382,8 @@ static void choke_reset(struct Qdisc *sc
sch->q.qlen = 0;
sch->qstats.backlog = 0;
- memset(q->tab, 0, (q->tab_mask + 1) * sizeof(struct sk_buff *));
+ if (q->tab)
+ memset(q->tab, 0, (q->tab_mask + 1) * sizeof(struct sk_buff *));
q->head = q->tail = 0;
red_restart(&q->vars);
}
From: Moshe Shemesh <[email protected]>
[ Upstream commit f3cb3cebe26ed4c8036adbd9448b372129d3c371 ]
mlx5_cmd_flush() will trigger forced completions to all valid command
entries. Triggered by an asynch event such as fast teardown it can
happen at any stage of the command, including command initialization.
It will trigger forced completion and that can lead to completion on an
uninitialized command entry.
Setting MLX5_CMD_ENT_STATE_PENDING_COMP only after command entry is
initialized will ensure force completion is treated only if command
entry is initialized.
Fixes: 73dd3a4839c1 ("net/mlx5: Avoid using pending command interface slots")
Signed-off-by: Moshe Shemesh <[email protected]>
Signed-off-by: Eran Ben Elisha <[email protected]>
Signed-off-by: Saeed Mahameed <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/mellanox/mlx5/core/cmd.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/net/ethernet/mellanox/mlx5/core/cmd.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/cmd.c
@@ -813,7 +813,6 @@ static void cmd_work_handler(struct work
}
cmd->ent_arr[ent->idx] = ent;
- set_bit(MLX5_CMD_ENT_STATE_PENDING_COMP, &ent->state);
lay = get_inst(cmd, ent->idx);
ent->lay = lay;
memset(lay, 0, sizeof(*lay));
@@ -835,6 +834,7 @@ static void cmd_work_handler(struct work
if (ent->callback)
schedule_delayed_work(&ent->cb_timeout_work, cb_timeout);
+ set_bit(MLX5_CMD_ENT_STATE_PENDING_COMP, &ent->state);
/* Skip sending command to fw if internal error */
if (pci_channel_offline(dev->pdev) ||
From: Kai Vehmanen <[email protected]>
[ Upstream commit ca76282b6faffc83601c25bd2a95f635c03503ef ]
A race exists between build_pcms() and build_controls() phases of codec
setup. Build_pcms() sets up notifier for jack events. If a monitor event
is received before build_controls() is run, the initial jack state is
lost and never reported via mixer controls.
The problem can be hit at least with SOF as the controller driver. SOF
calls snd_hda_codec_build_controls() in its workqueue-based probe and
this can be delayed enough to hit the race condition.
Fix the issue by invalidating the per-pin ELD information when
build_controls() is called. The existing call to hdmi_present_sense()
will update the ELD contents. This ensures initial monitor state is
correctly reflected via mixer controls.
BugLink: https://github.com/thesofproject/linux/issues/1687
Signed-off-by: Kai Vehmanen <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/pci/hda/patch_hdmi.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/sound/pci/hda/patch_hdmi.c b/sound/pci/hda/patch_hdmi.c
index e19f447e27ae1..a866a20349c32 100644
--- a/sound/pci/hda/patch_hdmi.c
+++ b/sound/pci/hda/patch_hdmi.c
@@ -2044,7 +2044,9 @@ static int generic_hdmi_build_controls(struct hda_codec *codec)
for (pin_idx = 0; pin_idx < spec->num_pins; pin_idx++) {
struct hdmi_spec_per_pin *per_pin = get_pin(spec, pin_idx);
+ struct hdmi_eld *pin_eld = &per_pin->sink_eld;
+ pin_eld->eld_valid = false;
hdmi_present_sense(per_pin, 0);
}
--
2.20.1
From: Linus Torvalds <[email protected]>
commit 5c45de21a2223fe46cf9488c99a7fbcf01527670 upstream.
This is a fine warning, but we still have a number of zero-length arrays
in the kernel that come from the traditional gcc extension. Yes, they
are getting converted to flexible arrays, but in the meantime the gcc-10
warning about zero-length bounds is very verbose, and is hiding other
issues.
I missed one actual build failure because it was hidden among hundreds
of lines of warning. Thankfully I caught it on the second go before
pushing things out, but it convinced me that I really need to disable
the new warnings for now.
We'll hopefully be all done with our conversion to flexible arrays in
the not too distant future, and we can then re-enable this warning.
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
Makefile | 3 +++
1 file changed, 3 insertions(+)
--- a/Makefile
+++ b/Makefile
@@ -797,6 +797,9 @@ KBUILD_CFLAGS += $(call cc-disable-warni
# disable stringop warnings in gcc 8+
KBUILD_CFLAGS += $(call cc-disable-warning, stringop-truncation)
+# We'll want to enable this eventually, but it's not going away for 5.7 at least
+KBUILD_CFLAGS += $(call cc-disable-warning, zero-length-bounds)
+
# Enabled with W=2, disabled by default as noisy
KBUILD_CFLAGS += $(call cc-disable-warning, maybe-uninitialized)
From: Takashi Iwai <[email protected]>
commit b590b38ca305d6d7902ec7c4f7e273e0069f3bcc upstream.
Lenovo Thinkpad T530 seems to have a sensitive internal mic capture
that needs to limit the mic boost like a few other Thinkpad models.
Although we may change the quirk for ALC269_FIXUP_LENOVO_DOCK, this
hits way too many other laptop models, so let's add a new fixup model
that limits the internal mic boost on top of the existing quirk and
apply to only T530.
BugLink: https://bugzilla.suse.com/show_bug.cgi?id=1171293
Cc: <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
sound/pci/hda/patch_realtek.c | 10 +++++++++-
1 file changed, 9 insertions(+), 1 deletion(-)
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -4890,6 +4890,7 @@ enum {
ALC269_FIXUP_HP_LINE1_MIC1_LED,
ALC269_FIXUP_INV_DMIC,
ALC269_FIXUP_LENOVO_DOCK,
+ ALC269_FIXUP_LENOVO_DOCK_LIMIT_BOOST,
ALC269_FIXUP_NO_SHUTUP,
ALC286_FIXUP_SONY_MIC_NO_PRESENCE,
ALC269_FIXUP_PINCFG_NO_HP_TO_LINEOUT,
@@ -5157,6 +5158,12 @@ static const struct hda_fixup alc269_fix
.chained = true,
.chain_id = ALC269_FIXUP_PINCFG_NO_HP_TO_LINEOUT
},
+ [ALC269_FIXUP_LENOVO_DOCK_LIMIT_BOOST] = {
+ .type = HDA_FIXUP_FUNC,
+ .v.func = alc269_fixup_limit_int_mic_boost,
+ .chained = true,
+ .chain_id = ALC269_FIXUP_LENOVO_DOCK,
+ },
[ALC269_FIXUP_PINCFG_NO_HP_TO_LINEOUT] = {
.type = HDA_FIXUP_FUNC,
.v.func = alc269_fixup_pincfg_no_hp_to_lineout,
@@ -5820,7 +5827,7 @@ static const struct snd_pci_quirk alc269
SND_PCI_QUIRK(0x17aa, 0x21b8, "Thinkpad Edge 14", ALC269_FIXUP_SKU_IGNORE),
SND_PCI_QUIRK(0x17aa, 0x21ca, "Thinkpad L412", ALC269_FIXUP_SKU_IGNORE),
SND_PCI_QUIRK(0x17aa, 0x21e9, "Thinkpad Edge 15", ALC269_FIXUP_SKU_IGNORE),
- SND_PCI_QUIRK(0x17aa, 0x21f6, "Thinkpad T530", ALC269_FIXUP_LENOVO_DOCK),
+ SND_PCI_QUIRK(0x17aa, 0x21f6, "Thinkpad T530", ALC269_FIXUP_LENOVO_DOCK_LIMIT_BOOST),
SND_PCI_QUIRK(0x17aa, 0x21fa, "Thinkpad X230", ALC269_FIXUP_LENOVO_DOCK),
SND_PCI_QUIRK(0x17aa, 0x21f3, "Thinkpad T430", ALC269_FIXUP_LENOVO_DOCK),
SND_PCI_QUIRK(0x17aa, 0x21fb, "Thinkpad T430s", ALC269_FIXUP_LENOVO_DOCK),
@@ -5945,6 +5952,7 @@ static const struct hda_model_fixup alc2
{.id = ALC269_FIXUP_HEADSET_MODE, .name = "headset-mode"},
{.id = ALC269_FIXUP_HEADSET_MODE_NO_HP_MIC, .name = "headset-mode-no-hp-mic"},
{.id = ALC269_FIXUP_LENOVO_DOCK, .name = "lenovo-dock"},
+ {.id = ALC269_FIXUP_LENOVO_DOCK_LIMIT_BOOST, .name = "lenovo-dock-limit-boost"},
{.id = ALC269_FIXUP_HP_GPIO_LED, .name = "hp-gpio-led"},
{.id = ALC269_FIXUP_HP_DOCK_GPIO_MIC1_LED, .name = "hp-dock-gpio-mic1-led"},
{.id = ALC269_FIXUP_DELL1_MIC_NO_PRESENCE, .name = "dell-headset-multi"},
From: Josh Poimboeuf <[email protected]>
commit d8dd25a461e4eec7190cb9d66616aceacc5110ad upstream.
When the current frame address (CFA) is stored on the stack (i.e.,
cfa->base == CFI_SP_INDIRECT), objtool neglects to adjust the stack
offset when there are subsequent pushes or pops. This results in bad
ORC data at the end of the ENTER_IRQ_STACK macro, when it puts the
previous stack pointer on the stack and does a subsequent push.
This fixes the following unwinder warning:
WARNING: can't dereference registers at 00000000f0a6bdba for ip interrupt_entry+0x9f/0xa0
Fixes: 627fce14809b ("objtool: Add ORC unwind table generation")
Reported-by: Vince Weaver <[email protected]>
Reported-by: Dave Jones <[email protected]>
Reported-by: Steven Rostedt <[email protected]>
Reported-by: Vegard Nossum <[email protected]>
Reported-by: Joe Mario <[email protected]>
Reviewed-by: Miroslav Benes <[email protected]>
Signed-off-by: Josh Poimboeuf <[email protected]>
Signed-off-by: Ingo Molnar <[email protected]>
Cc: Andy Lutomirski <[email protected]>
Cc: Jann Horn <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Link: https://lore.kernel.org/r/853d5d691b29e250333332f09b8e27410b2d9924.1587808742.git.jpoimboe@redhat.com
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
tools/objtool/check.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/tools/objtool/check.c
+++ b/tools/objtool/check.c
@@ -1264,7 +1264,7 @@ static int update_insn_state_regs(struct
struct cfi_reg *cfa = &state->cfa;
struct stack_op *op = &insn->stack_op;
- if (cfa->base != CFI_SP)
+ if (cfa->base != CFI_SP && cfa->base != CFI_SP_INDIRECT)
return 0;
/* push */
From: Paolo Abeni <[email protected]>
[ Upstream commit 57644431a6c2faac5d754ebd35780cf43a531b1a ]
In commit b406472b5ad7 ("net: ipv4: avoid mixed n_redirects and
rate_tokens usage") I missed the fact that a 0 'rate_tokens' will
bypass the backoff algorithm.
Since rate_tokens is cleared after a redirect silence, and never
incremented on redirects, if the host keeps receiving packets
requiring redirect it will reply ignoring the backoff.
Additionally, the 'rate_last' field will be updated with the
cadence of the ingress packet requiring redirect. If that rate is
high enough, that will prevent the host from generating any
other kind of ICMP messages
The check for a zero 'rate_tokens' value was likely a shortcut
to avoid the more complex backoff algorithm after a redirect
silence period. Address the issue checking for 'n_redirects'
instead, which is incremented on successful redirect, and
does not interfere with other ICMP replies.
Fixes: b406472b5ad7 ("net: ipv4: avoid mixed n_redirects and rate_tokens usage")
Reported-and-tested-by: Colin Walters <[email protected]>
Signed-off-by: Paolo Abeni <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/ipv4/route.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/net/ipv4/route.c
+++ b/net/ipv4/route.c
@@ -898,7 +898,7 @@ void ip_rt_send_redirect(struct sk_buff
/* Check for load limit; set rate_last to the latest sent
* redirect.
*/
- if (peer->rate_tokens == 0 ||
+ if (peer->n_redirects == 0 ||
time_after(jiffies,
(peer->rate_last +
(ip_rt_redirect_load << peer->n_redirects)))) {
From: Jesus Ramos <[email protected]>
commit 073919e09ca445d4486968e3f851372ff44cf2b5 upstream.
Kingston HyperX headset with 0951:16ad also needs the same quirk for
delaying the frequency controls.
Signed-off-by: Jesus Ramos <[email protected]>
Cc: <[email protected]>
Link: https://lore.kernel.org/r/BY5PR19MB3634BA68C7CCA23D8DF428E796AF0@BY5PR19MB3634.namprd19.prod.outlook.com
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
sound/usb/quirks.c | 9 +++++----
1 file changed, 5 insertions(+), 4 deletions(-)
--- a/sound/usb/quirks.c
+++ b/sound/usb/quirks.c
@@ -1316,13 +1316,14 @@ void snd_usb_ctl_msg_quirk(struct usb_de
&& (requesttype & USB_TYPE_MASK) == USB_TYPE_CLASS)
mdelay(20);
- /* Zoom R16/24, Logitech H650e, Jabra 550a needs a tiny delay here,
- * otherwise requests like get/set frequency return as failed despite
- * actually succeeding.
+ /* Zoom R16/24, Logitech H650e, Jabra 550a, Kingston HyperX needs a tiny
+ * delay here, otherwise requests like get/set frequency return as
+ * failed despite actually succeeding.
*/
if ((chip->usb_id == USB_ID(0x1686, 0x00dd) ||
chip->usb_id == USB_ID(0x046d, 0x0a46) ||
- chip->usb_id == USB_ID(0x0b0e, 0x0349)) &&
+ chip->usb_id == USB_ID(0x0b0e, 0x0349) ||
+ chip->usb_id == USB_ID(0x0951, 0x16ad)) &&
(requesttype & USB_TYPE_MASK) == USB_TYPE_CLASS)
mdelay(1);
}
From: Shijie Luo <[email protected]>
commit af133ade9a40794a37104ecbcc2827c0ea373a3c upstream.
When journal size is set too big by "mkfs.ext4 -J size=", or when
we mount a crafted image to make journal inode->i_size too big,
the loop, "while (i < num)", holds cpu too long. This could cause
soft lockup.
[ 529.357541] Call trace:
[ 529.357551] dump_backtrace+0x0/0x198
[ 529.357555] show_stack+0x24/0x30
[ 529.357562] dump_stack+0xa4/0xcc
[ 529.357568] watchdog_timer_fn+0x300/0x3e8
[ 529.357574] __hrtimer_run_queues+0x114/0x358
[ 529.357576] hrtimer_interrupt+0x104/0x2d8
[ 529.357580] arch_timer_handler_virt+0x38/0x58
[ 529.357584] handle_percpu_devid_irq+0x90/0x248
[ 529.357588] generic_handle_irq+0x34/0x50
[ 529.357590] __handle_domain_irq+0x68/0xc0
[ 529.357593] gic_handle_irq+0x6c/0x150
[ 529.357595] el1_irq+0xb8/0x140
[ 529.357599] __ll_sc_atomic_add_return_acquire+0x14/0x20
[ 529.357668] ext4_map_blocks+0x64/0x5c0 [ext4]
[ 529.357693] ext4_setup_system_zone+0x330/0x458 [ext4]
[ 529.357717] ext4_fill_super+0x2170/0x2ba8 [ext4]
[ 529.357722] mount_bdev+0x1a8/0x1e8
[ 529.357746] ext4_mount+0x44/0x58 [ext4]
[ 529.357748] mount_fs+0x50/0x170
[ 529.357752] vfs_kern_mount.part.9+0x54/0x188
[ 529.357755] do_mount+0x5ac/0xd78
[ 529.357758] ksys_mount+0x9c/0x118
[ 529.357760] __arm64_sys_mount+0x28/0x38
[ 529.357764] el0_svc_common+0x78/0x130
[ 529.357766] el0_svc_handler+0x38/0x78
[ 529.357769] el0_svc+0x8/0xc
[ 541.356516] watchdog: BUG: soft lockup - CPU#0 stuck for 23s! [mount:18674]
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Jan Kara <[email protected]>
Signed-off-by: Shijie Luo <[email protected]>
Signed-off-by: Theodore Ts'o <[email protected]>
Cc: [email protected]
Signed-off-by: Ben Hutchings <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/ext4/block_validity.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/fs/ext4/block_validity.c b/fs/ext4/block_validity.c
index d31d93ee5e76f..45c7b0f9a8e3f 100644
--- a/fs/ext4/block_validity.c
+++ b/fs/ext4/block_validity.c
@@ -152,6 +152,7 @@ static int ext4_protect_reserved_inode(struct super_block *sb, u32 ino)
return PTR_ERR(inode);
num = (inode->i_size + sb->s_blocksize - 1) >> sb->s_blocksize_bits;
while (i < num) {
+ cond_resched();
map.m_lblk = i;
map.m_len = num - i;
n = ext4_map_blocks(NULL, inode, &map, 0);
--
2.20.1
From: Lubomir Rintel <[email protected]>
[ Upstream commit 0c89446379218698189a47871336cb30286a7197 ]
When a channel configuration fails, the status of the channel is set to
DEV_ERROR so that an attempt to submit it fails. However, this status
sticks until the heat end of the universe, making it impossible to
recover from the error.
Let's reset it when the channel is released so that further use of the
channel with correct configuration is not impacted.
Signed-off-by: Lubomir Rintel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Vinod Koul <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/dma/mmp_tdma.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/dma/mmp_tdma.c b/drivers/dma/mmp_tdma.c
index 13c68b6434ce2..15b4a44e60069 100644
--- a/drivers/dma/mmp_tdma.c
+++ b/drivers/dma/mmp_tdma.c
@@ -362,6 +362,8 @@ static void mmp_tdma_free_descriptor(struct mmp_tdma_chan *tdmac)
gen_pool_free(gpool, (unsigned long)tdmac->desc_arr,
size);
tdmac->desc_arr = NULL;
+ if (tdmac->status == DMA_ERROR)
+ tdmac->status = DMA_COMPLETE;
return;
}
--
2.20.1
From: Dmitry Torokhov <[email protected]>
commit af59e717d5ff9c8dbf9bcc581c0dfb3b2a9c9030 upstream.
Instead of creating selected attributes after the device is created (and
after userspace potentially seen uevent), lets use attribute group
is_visible() method to control which attributes are shown. This will allow
us to create all attributes (except "pins" group, which will be taken care
of later) before userspace gets notified about new ptp class device.
Signed-off-by: Dmitry Torokhov <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Ben Hutchings <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/ptp/ptp_sysfs.c | 125 ++++++++++++++++++----------------------
1 file changed, 55 insertions(+), 70 deletions(-)
diff --git a/drivers/ptp/ptp_sysfs.c b/drivers/ptp/ptp_sysfs.c
index 302e626fe6b01..a55a6eb4dfde9 100644
--- a/drivers/ptp/ptp_sysfs.c
+++ b/drivers/ptp/ptp_sysfs.c
@@ -46,27 +46,6 @@ PTP_SHOW_INT(n_periodic_outputs, n_per_out);
PTP_SHOW_INT(n_programmable_pins, n_pins);
PTP_SHOW_INT(pps_available, pps);
-static struct attribute *ptp_attrs[] = {
- &dev_attr_clock_name.attr,
- &dev_attr_max_adjustment.attr,
- &dev_attr_n_alarms.attr,
- &dev_attr_n_external_timestamps.attr,
- &dev_attr_n_periodic_outputs.attr,
- &dev_attr_n_programmable_pins.attr,
- &dev_attr_pps_available.attr,
- NULL,
-};
-
-static const struct attribute_group ptp_group = {
- .attrs = ptp_attrs,
-};
-
-const struct attribute_group *ptp_groups[] = {
- &ptp_group,
- NULL,
-};
-
-
static ssize_t extts_enable_store(struct device *dev,
struct device_attribute *attr,
const char *buf, size_t count)
@@ -91,6 +70,7 @@ static ssize_t extts_enable_store(struct device *dev,
out:
return err;
}
+static DEVICE_ATTR(extts_enable, 0220, NULL, extts_enable_store);
static ssize_t extts_fifo_show(struct device *dev,
struct device_attribute *attr, char *page)
@@ -124,6 +104,7 @@ out:
mutex_unlock(&ptp->tsevq_mux);
return cnt;
}
+static DEVICE_ATTR(fifo, 0444, extts_fifo_show, NULL);
static ssize_t period_store(struct device *dev,
struct device_attribute *attr,
@@ -151,6 +132,7 @@ static ssize_t period_store(struct device *dev,
out:
return err;
}
+static DEVICE_ATTR(period, 0220, NULL, period_store);
static ssize_t pps_enable_store(struct device *dev,
struct device_attribute *attr,
@@ -177,6 +159,57 @@ static ssize_t pps_enable_store(struct device *dev,
out:
return err;
}
+static DEVICE_ATTR(pps_enable, 0220, NULL, pps_enable_store);
+
+static struct attribute *ptp_attrs[] = {
+ &dev_attr_clock_name.attr,
+
+ &dev_attr_max_adjustment.attr,
+ &dev_attr_n_alarms.attr,
+ &dev_attr_n_external_timestamps.attr,
+ &dev_attr_n_periodic_outputs.attr,
+ &dev_attr_n_programmable_pins.attr,
+ &dev_attr_pps_available.attr,
+
+ &dev_attr_extts_enable.attr,
+ &dev_attr_fifo.attr,
+ &dev_attr_period.attr,
+ &dev_attr_pps_enable.attr,
+ NULL
+};
+
+static umode_t ptp_is_attribute_visible(struct kobject *kobj,
+ struct attribute *attr, int n)
+{
+ struct device *dev = kobj_to_dev(kobj);
+ struct ptp_clock *ptp = dev_get_drvdata(dev);
+ struct ptp_clock_info *info = ptp->info;
+ umode_t mode = attr->mode;
+
+ if (attr == &dev_attr_extts_enable.attr ||
+ attr == &dev_attr_fifo.attr) {
+ if (!info->n_ext_ts)
+ mode = 0;
+ } else if (attr == &dev_attr_period.attr) {
+ if (!info->n_per_out)
+ mode = 0;
+ } else if (attr == &dev_attr_pps_enable.attr) {
+ if (!info->pps)
+ mode = 0;
+ }
+
+ return mode;
+}
+
+static const struct attribute_group ptp_group = {
+ .is_visible = ptp_is_attribute_visible,
+ .attrs = ptp_attrs,
+};
+
+const struct attribute_group *ptp_groups[] = {
+ &ptp_group,
+ NULL
+};
static int ptp_pin_name2index(struct ptp_clock *ptp, const char *name)
{
@@ -235,26 +268,11 @@ static ssize_t ptp_pin_store(struct device *dev, struct device_attribute *attr,
return count;
}
-static DEVICE_ATTR(extts_enable, 0220, NULL, extts_enable_store);
-static DEVICE_ATTR(fifo, 0444, extts_fifo_show, NULL);
-static DEVICE_ATTR(period, 0220, NULL, period_store);
-static DEVICE_ATTR(pps_enable, 0220, NULL, pps_enable_store);
-
int ptp_cleanup_sysfs(struct ptp_clock *ptp)
{
struct device *dev = ptp->dev;
struct ptp_clock_info *info = ptp->info;
- if (info->n_ext_ts) {
- device_remove_file(dev, &dev_attr_extts_enable);
- device_remove_file(dev, &dev_attr_fifo);
- }
- if (info->n_per_out)
- device_remove_file(dev, &dev_attr_period);
-
- if (info->pps)
- device_remove_file(dev, &dev_attr_pps_enable);
-
if (info->n_pins) {
sysfs_remove_group(&dev->kobj, &ptp->pin_attr_group);
kfree(ptp->pin_attr);
@@ -307,46 +325,13 @@ no_dev_attr:
int ptp_populate_sysfs(struct ptp_clock *ptp)
{
- struct device *dev = ptp->dev;
struct ptp_clock_info *info = ptp->info;
int err;
- if (info->n_ext_ts) {
- err = device_create_file(dev, &dev_attr_extts_enable);
- if (err)
- goto out1;
- err = device_create_file(dev, &dev_attr_fifo);
- if (err)
- goto out2;
- }
- if (info->n_per_out) {
- err = device_create_file(dev, &dev_attr_period);
- if (err)
- goto out3;
- }
- if (info->pps) {
- err = device_create_file(dev, &dev_attr_pps_enable);
- if (err)
- goto out4;
- }
if (info->n_pins) {
err = ptp_populate_pins(ptp);
if (err)
- goto out5;
+ return err;
}
return 0;
-out5:
- if (info->pps)
- device_remove_file(dev, &dev_attr_pps_enable);
-out4:
- if (info->n_per_out)
- device_remove_file(dev, &dev_attr_period);
-out3:
- if (info->n_ext_ts)
- device_remove_file(dev, &dev_attr_fifo);
-out2:
- if (info->n_ext_ts)
- device_remove_file(dev, &dev_attr_extts_enable);
-out1:
- return err;
}
--
2.20.1
From: Samuel Cabrero <[email protected]>
[ Upstream commit 76e752701a8af4404bbd9c45723f7cbd6e4a251e ]
Some servers seem to accept connections while booting but never send
the SMBNegotiate response neither close the connection, causing all
processes accessing the share hang on uninterruptible sleep state.
This happens when the cifs_demultiplex_thread detects the server is
unresponsive so releases the socket and start trying to reconnect.
At some point, the faulty server will accept the socket and the TCP
status will be set to NeedNegotiate. The first issued command accessing
the share will start the negotiation (pid 5828 below), but the response
will never arrive so other commands will be blocked waiting on the mutex
(pid 55352).
This patch checks for unresponsive servers also on the negotiate stage
releasing the socket and reconnecting if the response is not received
and checking again the tcp state when the mutex is acquired.
PID: 55352 TASK: ffff880fd6cc02c0 CPU: 0 COMMAND: "ls"
#0 [ffff880fd9add9f0] schedule at ffffffff81467eb9
#1 [ffff880fd9addb38] __mutex_lock_slowpath at ffffffff81468fe0
#2 [ffff880fd9addba8] mutex_lock at ffffffff81468b1a
#3 [ffff880fd9addbc0] cifs_reconnect_tcon at ffffffffa042f905 [cifs]
#4 [ffff880fd9addc60] smb_init at ffffffffa042faeb [cifs]
#5 [ffff880fd9addca0] CIFSSMBQPathInfo at ffffffffa04360b5 [cifs]
....
Which is waiting a mutex owned by:
PID: 5828 TASK: ffff880fcc55e400 CPU: 0 COMMAND: "xxxx"
#0 [ffff880fbfdc19b8] schedule at ffffffff81467eb9
#1 [ffff880fbfdc1b00] wait_for_response at ffffffffa044f96d [cifs]
#2 [ffff880fbfdc1b60] SendReceive at ffffffffa04505ce [cifs]
#3 [ffff880fbfdc1bb0] CIFSSMBNegotiate at ffffffffa0438d79 [cifs]
#4 [ffff880fbfdc1c50] cifs_negotiate_protocol at ffffffffa043b383 [cifs]
#5 [ffff880fbfdc1c80] cifs_reconnect_tcon at ffffffffa042f911 [cifs]
#6 [ffff880fbfdc1d20] smb_init at ffffffffa042faeb [cifs]
#7 [ffff880fbfdc1d60] CIFSSMBQFSInfo at ffffffffa0434eb0 [cifs]
....
Signed-off-by: Samuel Cabrero <[email protected]>
Reviewed-by: Aurélien Aptel <[email protected]>
Reviewed-by: Ronnie Sahlberg <[email protected]>
Signed-off-by: Steve French <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/cifs/cifssmb.c | 12 ++++++++++++
fs/cifs/connect.c | 3 ++-
fs/cifs/smb2pdu.c | 12 ++++++++++++
3 files changed, 26 insertions(+), 1 deletion(-)
diff --git a/fs/cifs/cifssmb.c b/fs/cifs/cifssmb.c
index 741b83c59a306..568abcd6d0dd3 100644
--- a/fs/cifs/cifssmb.c
+++ b/fs/cifs/cifssmb.c
@@ -184,6 +184,18 @@ cifs_reconnect_tcon(struct cifs_tcon *tcon, int smb_command)
* reconnect the same SMB session
*/
mutex_lock(&ses->session_mutex);
+
+ /*
+ * Recheck after acquire mutex. If another thread is negotiating
+ * and the server never sends an answer the socket will be closed
+ * and tcpStatus set to reconnect.
+ */
+ if (server->tcpStatus == CifsNeedReconnect) {
+ rc = -EHOSTDOWN;
+ mutex_unlock(&ses->session_mutex);
+ goto out;
+ }
+
rc = cifs_negotiate_protocol(0, ses);
if (rc == 0 && ses->need_reconnect)
rc = cifs_setup_session(0, ses, nls_codepage);
diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c
index c018d161735c4..37c8cac86431f 100644
--- a/fs/cifs/connect.c
+++ b/fs/cifs/connect.c
@@ -561,7 +561,8 @@ server_unresponsive(struct TCP_Server_Info *server)
* 65s kernel_recvmsg times out, and we see that we haven't gotten
* a response in >60s.
*/
- if (server->tcpStatus == CifsGood &&
+ if ((server->tcpStatus == CifsGood ||
+ server->tcpStatus == CifsNeedNegotiate) &&
time_after(jiffies, server->lstrp + 2 * server->echo_interval)) {
cifs_dbg(VFS, "Server %s has not responded in %lu seconds. Reconnecting...\n",
server->hostname, (2 * server->echo_interval) / HZ);
diff --git a/fs/cifs/smb2pdu.c b/fs/cifs/smb2pdu.c
index e8dc28dbe563e..0a23b6002ff12 100644
--- a/fs/cifs/smb2pdu.c
+++ b/fs/cifs/smb2pdu.c
@@ -246,6 +246,18 @@ smb2_reconnect(__le16 smb2_command, struct cifs_tcon *tcon)
* the same SMB session
*/
mutex_lock(&tcon->ses->session_mutex);
+
+ /*
+ * Recheck after acquire mutex. If another thread is negotiating
+ * and the server never sends an answer the socket will be closed
+ * and tcpStatus set to reconnect.
+ */
+ if (server->tcpStatus == CifsNeedReconnect) {
+ rc = -EHOSTDOWN;
+ mutex_unlock(&tcon->ses->session_mutex);
+ goto out;
+ }
+
rc = cifs_negotiate_protocol(0, tcon->ses);
if (!rc && tcon->ses->need_reconnect) {
rc = cifs_setup_session(0, tcon->ses, nls_codepage);
--
2.20.1
From: Masahiro Yamada <[email protected]>
commit b303c6df80c9f8f13785aa83a0471fca7e38b24d upstream.
Since -Wmaybe-uninitialized was introduced by GCC 4.7, we have patched
various false positives:
- commit e74fc973b6e5 ("Turn off -Wmaybe-uninitialized when building
with -Os") turned off this option for -Os.
- commit 815eb71e7149 ("Kbuild: disable 'maybe-uninitialized' warning
for CONFIG_PROFILE_ALL_BRANCHES") turned off this option for
CONFIG_PROFILE_ALL_BRANCHES
- commit a76bcf557ef4 ("Kbuild: enable -Wmaybe-uninitialized warning
for "make W=1"") turned off this option for GCC < 4.9
Arnd provided more explanation in https://lkml.org/lkml/2017/3/14/903
I think this looks better by shifting the logic from Makefile to Kconfig.
Link: https://github.com/ClangBuiltLinux/linux/issues/350
Signed-off-by: Masahiro Yamada <[email protected]>
Reviewed-by: Nathan Chancellor <[email protected]>
Tested-by: Nick Desaulniers <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
Makefile | 11 ++++-------
init/Kconfig | 17 +++++++++++++++++
kernel/trace/Kconfig | 1 +
3 files changed, 22 insertions(+), 7 deletions(-)
--- a/Makefile
+++ b/Makefile
@@ -658,17 +658,14 @@ KBUILD_CFLAGS += $(call cc-option,-fdata
endif
ifdef CONFIG_CC_OPTIMIZE_FOR_SIZE
-KBUILD_CFLAGS += -Os $(call cc-disable-warning,maybe-uninitialized,)
-else
-ifdef CONFIG_PROFILE_ALL_BRANCHES
-KBUILD_CFLAGS += -O2 $(call cc-disable-warning,maybe-uninitialized,)
+KBUILD_CFLAGS += -Os
else
KBUILD_CFLAGS += -O2
endif
-endif
-KBUILD_CFLAGS += $(call cc-ifversion, -lt, 0409, \
- $(call cc-disable-warning,maybe-uninitialized,))
+ifdef CONFIG_CC_DISABLE_WARN_MAYBE_UNINITIALIZED
+KBUILD_CFLAGS += -Wno-maybe-uninitialized
+endif
# Tell gcc to never replace conditional load with a non-conditional one
KBUILD_CFLAGS += $(call cc-option,--param=allow-store-data-races=0)
--- a/init/Kconfig
+++ b/init/Kconfig
@@ -16,6 +16,22 @@ config DEFCONFIG_LIST
default "$ARCH_DEFCONFIG"
default "arch/$ARCH/defconfig"
+config CC_HAS_WARN_MAYBE_UNINITIALIZED
+ def_bool $(cc-option,-Wmaybe-uninitialized)
+ help
+ GCC >= 4.7 supports this option.
+
+config CC_DISABLE_WARN_MAYBE_UNINITIALIZED
+ bool
+ depends on CC_HAS_WARN_MAYBE_UNINITIALIZED
+ default CC_IS_GCC && GCC_VERSION < 40900 # unreliable for GCC < 4.9
+ help
+ GCC's -Wmaybe-uninitialized is not reliable by definition.
+ Lots of false positive warnings are produced in some cases.
+
+ If this option is enabled, -Wno-maybe-uninitialzed is passed
+ to the compiler to suppress maybe-uninitialized warnings.
+
config CONSTRUCTORS
bool
depends on !UML
@@ -1333,6 +1349,7 @@ config CC_OPTIMIZE_FOR_PERFORMANCE
config CC_OPTIMIZE_FOR_SIZE
bool "Optimize for size"
+ imply CC_DISABLE_WARN_MAYBE_UNINITIALIZED # avoid false positives
help
Enabling this option will pass "-Os" instead of "-O2" to
your compiler resulting in a smaller kernel.
--- a/kernel/trace/Kconfig
+++ b/kernel/trace/Kconfig
@@ -342,6 +342,7 @@ config PROFILE_ANNOTATED_BRANCHES
config PROFILE_ALL_BRANCHES
bool "Profile all if conditionals"
select TRACE_BRANCH_PROFILING
+ imply CC_DISABLE_WARN_MAYBE_UNINITIALIZED # avoid false positives
help
This tracer profiles all branch conditions. Every if ()
taken in the kernel is recorded whether it hit or miss.
From: Jens Axboe <[email protected]>
commit 2967acbb257a6a9bf912f4778b727e00972eac9b upstream.
A previous commit changed the locking around registration/cleanup,
but direct callers of blk_trace_remove() were missed. This means
that if we hit the error path in setup, we will deadlock on
attempting to re-acquire the queue trace mutex.
Fixes: 1f2cac107c59 ("blktrace: fix unlocked access to init/start-stop/teardown")
Signed-off-by: Jens Axboe <[email protected]>
Signed-off-by: Ben Hutchings <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
kernel/trace/blktrace.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/kernel/trace/blktrace.c b/kernel/trace/blktrace.c
index 55337d797deb1..a88e677c74f31 100644
--- a/kernel/trace/blktrace.c
+++ b/kernel/trace/blktrace.c
@@ -572,7 +572,7 @@ static int __blk_trace_setup(struct request_queue *q, char *name, dev_t dev,
return ret;
if (copy_to_user(arg, &buts, sizeof(buts))) {
- blk_trace_remove(q);
+ __blk_trace_remove(q);
return -EFAULT;
}
return 0;
@@ -618,7 +618,7 @@ static int compat_blk_trace_setup(struct request_queue *q, char *name,
return ret;
if (copy_to_user(arg, &buts.name, ARRAY_SIZE(buts.name))) {
- blk_trace_remove(q);
+ __blk_trace_remove(q);
return -EFAULT;
}
--
2.20.1
From: Takashi Iwai <[email protected]>
commit c1f6e3c818dd734c30f6a7eeebf232ba2cf3181d upstream.
The rawmidi core allows user to resize the runtime buffer via ioctl,
and this may lead to UAF when performed during concurrent reads or
writes: the read/write functions unlock the runtime lock temporarily
during copying form/to user-space, and that's the race window.
This patch fixes the hole by introducing a reference counter for the
runtime buffer read/write access and returns -EBUSY error when the
resize is performed concurrently against read/write.
Note that the ref count field is a simple integer instead of
refcount_t here, since the all contexts accessing the buffer is
basically protected with a spinlock, hence we need no expensive atomic
ops. Also, note that this busy check is needed only against read /
write functions, and not in receive/transmit callbacks; the race can
happen only at the spinlock hole mentioned in the above, while the
whole function is protected for receive / transmit callbacks.
Reported-by: butt3rflyh4ck <[email protected]>
Cc: <[email protected]>
Link: https://lore.kernel.org/r/CAFcO6XMWpUVK_yzzCpp8_XP7+=oUpQvuBeCbMffEDkpe8jWrfg@mail.gmail.com
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
include/sound/rawmidi.h | 1 +
sound/core/rawmidi.c | 31 +++++++++++++++++++++++++++----
2 files changed, 28 insertions(+), 4 deletions(-)
--- a/include/sound/rawmidi.h
+++ b/include/sound/rawmidi.h
@@ -76,6 +76,7 @@ struct snd_rawmidi_runtime {
size_t avail_min; /* min avail for wakeup */
size_t avail; /* max used buffer for wakeup */
size_t xruns; /* over/underruns counter */
+ int buffer_ref; /* buffer reference count */
/* misc */
spinlock_t lock;
wait_queue_head_t sleep;
--- a/sound/core/rawmidi.c
+++ b/sound/core/rawmidi.c
@@ -108,6 +108,17 @@ static void snd_rawmidi_input_event_work
runtime->event(runtime->substream);
}
+/* buffer refcount management: call with runtime->lock held */
+static inline void snd_rawmidi_buffer_ref(struct snd_rawmidi_runtime *runtime)
+{
+ runtime->buffer_ref++;
+}
+
+static inline void snd_rawmidi_buffer_unref(struct snd_rawmidi_runtime *runtime)
+{
+ runtime->buffer_ref--;
+}
+
static int snd_rawmidi_runtime_create(struct snd_rawmidi_substream *substream)
{
struct snd_rawmidi_runtime *runtime;
@@ -654,6 +665,11 @@ int snd_rawmidi_output_params(struct snd
if (!newbuf)
return -ENOMEM;
spin_lock_irq(&runtime->lock);
+ if (runtime->buffer_ref) {
+ spin_unlock_irq(&runtime->lock);
+ kfree(newbuf);
+ return -EBUSY;
+ }
oldbuf = runtime->buffer;
runtime->buffer = newbuf;
runtime->buffer_size = params->buffer_size;
@@ -962,8 +978,10 @@ static long snd_rawmidi_kernel_read1(str
long result = 0, count1;
struct snd_rawmidi_runtime *runtime = substream->runtime;
unsigned long appl_ptr;
+ int err = 0;
spin_lock_irqsave(&runtime->lock, flags);
+ snd_rawmidi_buffer_ref(runtime);
while (count > 0 && runtime->avail) {
count1 = runtime->buffer_size - runtime->appl_ptr;
if (count1 > count)
@@ -982,16 +1000,19 @@ static long snd_rawmidi_kernel_read1(str
if (userbuf) {
spin_unlock_irqrestore(&runtime->lock, flags);
if (copy_to_user(userbuf + result,
- runtime->buffer + appl_ptr, count1)) {
- return result > 0 ? result : -EFAULT;
- }
+ runtime->buffer + appl_ptr, count1))
+ err = -EFAULT;
spin_lock_irqsave(&runtime->lock, flags);
+ if (err)
+ goto out;
}
result += count1;
count -= count1;
}
+ out:
+ snd_rawmidi_buffer_unref(runtime);
spin_unlock_irqrestore(&runtime->lock, flags);
- return result;
+ return result > 0 ? result : err;
}
long snd_rawmidi_kernel_read(struct snd_rawmidi_substream *substream,
@@ -1262,6 +1283,7 @@ static long snd_rawmidi_kernel_write1(st
return -EAGAIN;
}
}
+ snd_rawmidi_buffer_ref(runtime);
while (count > 0 && runtime->avail > 0) {
count1 = runtime->buffer_size - runtime->appl_ptr;
if (count1 > count)
@@ -1293,6 +1315,7 @@ static long snd_rawmidi_kernel_write1(st
}
__end:
count1 = runtime->avail < runtime->buffer_size;
+ snd_rawmidi_buffer_unref(runtime);
spin_unlock_irqrestore(&runtime->lock, flags);
if (count1)
snd_rawmidi_output_trigger(substream, 1);
From: Michael Chan <[email protected]>
[ Upstream commit c72cb303aa6c2ae7e4184f0081c6d11bf03fb96b ]
The current logic in bnxt_fix_features() will inadvertently turn on both
CTAG and STAG VLAN offload if the user tries to disable both. Fix it
by checking that the user is trying to enable CTAG or STAG before
enabling both. The logic is supposed to enable or disable both CTAG and
STAG together.
Fixes: 5a9f6b238e59 ("bnxt_en: Enable and disable RX CTAG and RX STAG VLAN acceleration together.")
Signed-off-by: Michael Chan <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/broadcom/bnxt/bnxt.c | 9 ++++++---
1 file changed, 6 insertions(+), 3 deletions(-)
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt.c
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.c
@@ -5997,6 +5997,7 @@ static netdev_features_t bnxt_fix_featur
netdev_features_t features)
{
struct bnxt *bp = netdev_priv(dev);
+ netdev_features_t vlan_features;
if ((features & NETIF_F_NTUPLE) && !bnxt_rfs_capable(bp))
features &= ~NETIF_F_NTUPLE;
@@ -6004,12 +6005,14 @@ static netdev_features_t bnxt_fix_featur
/* Both CTAG and STAG VLAN accelaration on the RX side have to be
* turned on or off together.
*/
- if ((features & (NETIF_F_HW_VLAN_CTAG_RX | NETIF_F_HW_VLAN_STAG_RX)) !=
- (NETIF_F_HW_VLAN_CTAG_RX | NETIF_F_HW_VLAN_STAG_RX)) {
+ vlan_features = features & (NETIF_F_HW_VLAN_CTAG_RX |
+ NETIF_F_HW_VLAN_STAG_RX);
+ if (vlan_features != (NETIF_F_HW_VLAN_CTAG_RX |
+ NETIF_F_HW_VLAN_STAG_RX)) {
if (dev->features & NETIF_F_HW_VLAN_CTAG_RX)
features &= ~(NETIF_F_HW_VLAN_CTAG_RX |
NETIF_F_HW_VLAN_STAG_RX);
- else
+ else if (vlan_features)
features |= NETIF_F_HW_VLAN_CTAG_RX |
NETIF_F_HW_VLAN_STAG_RX;
}
From: Fabio Estevam <[email protected]>
commit 0caf34350a25907515d929a9c77b9b206aac6d1e upstream.
The I2C2 pins are already used and the following errors are seen:
imx27-pinctrl 10015000.iomuxc: pin MX27_PAD_I2C2_SDA already requested by 10012000.i2c; cannot claim for 1001d000.i2c
imx27-pinctrl 10015000.iomuxc: pin-69 (1001d000.i2c) status -22
imx27-pinctrl 10015000.iomuxc: could not request pin 69 (MX27_PAD_I2C2_SDA) from group i2c2grp on device 10015000.iomuxc
imx-i2c 1001d000.i2c: Error applying setting, reverse things back
imx-i2c: probe of 1001d000.i2c failed with error -22
Fix it by adding the correct I2C1 IOMUX entries for the pinctrl_i2c1 group.
Cc: <[email protected]>
Fixes: 61664d0b432a ("ARM: dts: imx27 phyCARD-S pinctrl")
Signed-off-by: Fabio Estevam <[email protected]>
Reviewed-by: Stefan Riedmueller <[email protected]>
Signed-off-by: Shawn Guo <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/arm/boot/dts/imx27-phytec-phycard-s-rdk.dts | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/arch/arm/boot/dts/imx27-phytec-phycard-s-rdk.dts
+++ b/arch/arm/boot/dts/imx27-phytec-phycard-s-rdk.dts
@@ -81,8 +81,8 @@
imx27-phycard-s-rdk {
pinctrl_i2c1: i2c1grp {
fsl,pins = <
- MX27_PAD_I2C2_SDA__I2C2_SDA 0x0
- MX27_PAD_I2C2_SCL__I2C2_SCL 0x0
+ MX27_PAD_I2C_DATA__I2C_DATA 0x0
+ MX27_PAD_I2C_CLK__I2C_CLK 0x0
>;
};
From: Christophe JAILLET <[email protected]>
commit 19b94c1f9c9a16d41a8de3ccbdb8536cf1aecdbf upstream.
If 'usb_otg_descriptor_alloc()' fails, we must return an error code, not 0.
Fixes: 56023ce0fd70 ("usb: gadget: audio: allocate and init otg descriptor by otg capabilities")
Reviewed-by: Peter Chen <[email protected]>
Signed-off-by: Christophe JAILLET <[email protected]>
Signed-off-by: Felipe Balbi <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/gadget/legacy/audio.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
--- a/drivers/usb/gadget/legacy/audio.c
+++ b/drivers/usb/gadget/legacy/audio.c
@@ -249,8 +249,10 @@ static int audio_bind(struct usb_composi
struct usb_descriptor_header *usb_desc;
usb_desc = usb_otg_descriptor_alloc(cdev->gadget);
- if (!usb_desc)
+ if (!usb_desc) {
+ status = -ENOMEM;
goto fail;
+ }
usb_otg_descriptor_init(cdev->gadget, usb_desc);
otg_desc[0] = usb_desc;
otg_desc[1] = NULL;
From: Sergei Trofimovich <[email protected]>
commit b1112139a103b4b1101d0d2d72931f2d33d8c978 upstream.
gcc-10 will rename --param=allow-store-data-races=0
to -fno-allow-store-data-races.
The flag change happened at https://gcc.gnu.org/PR92046.
Signed-off-by: Sergei Trofimovich <[email protected]>
Acked-by: Jiri Kosina <[email protected]>
Signed-off-by: Masahiro Yamada <[email protected]>
Cc: Thomas Backlund <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
Makefile | 1 +
1 file changed, 1 insertion(+)
--- a/Makefile
+++ b/Makefile
@@ -665,6 +665,7 @@ endif
# Tell gcc to never replace conditional load with a non-conditional one
KBUILD_CFLAGS += $(call cc-option,--param=allow-store-data-races=0)
+KBUILD_CFLAGS += $(call cc-option,-fno-allow-store-data-races)
# check for 'asm goto'
ifeq ($(shell $(CONFIG_SHELL) $(srctree)/scripts/gcc-goto.sh $(CC) $(KBUILD_CFLAGS)), y)
From: Paolo Abeni <[email protected]>
[ Upstream commit eead1c2ea2509fd754c6da893a94f0e69e83ebe4 ]
The cipso and calipso code can set the MLS_CAT attribute on
successful parsing, even if the corresponding catmap has
not been allocated, as per current configuration and external
input.
Later, selinux code tries to access the catmap if the MLS_CAT flag
is present via netlbl_catmap_getlong(). That may cause null ptr
dereference while processing incoming network traffic.
Address the issue setting the MLS_CAT flag only if the catmap is
really allocated. Additionally let netlbl_catmap_getlong() cope
with NULL catmap.
Reported-by: Matthew Sheets <[email protected]>
Fixes: 4b8feff251da ("netlabel: fix the horribly broken catmap functions")
Fixes: ceba1832b1b2 ("calipso: Set the calipso socket label to match the secattr.")
Signed-off-by: Paolo Abeni <[email protected]>
Acked-by: Paul Moore <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/ipv4/cipso_ipv4.c | 6 ++++--
net/ipv6/calipso.c | 3 ++-
net/netlabel/netlabel_kapi.c | 6 ++++++
3 files changed, 12 insertions(+), 3 deletions(-)
--- a/net/ipv4/cipso_ipv4.c
+++ b/net/ipv4/cipso_ipv4.c
@@ -1272,7 +1272,8 @@ static int cipso_v4_parsetag_rbm(const s
return ret_val;
}
- secattr->flags |= NETLBL_SECATTR_MLS_CAT;
+ if (secattr->attr.mls.cat)
+ secattr->flags |= NETLBL_SECATTR_MLS_CAT;
}
return 0;
@@ -1453,7 +1454,8 @@ static int cipso_v4_parsetag_rng(const s
return ret_val;
}
- secattr->flags |= NETLBL_SECATTR_MLS_CAT;
+ if (secattr->attr.mls.cat)
+ secattr->flags |= NETLBL_SECATTR_MLS_CAT;
}
return 0;
--- a/net/ipv6/calipso.c
+++ b/net/ipv6/calipso.c
@@ -1061,7 +1061,8 @@ static int calipso_opt_getattr(const uns
goto getattr_return;
}
- secattr->flags |= NETLBL_SECATTR_MLS_CAT;
+ if (secattr->attr.mls.cat)
+ secattr->flags |= NETLBL_SECATTR_MLS_CAT;
}
secattr->type = NETLBL_NLTYPE_CALIPSO;
--- a/net/netlabel/netlabel_kapi.c
+++ b/net/netlabel/netlabel_kapi.c
@@ -748,6 +748,12 @@ int netlbl_catmap_getlong(struct netlbl_
if ((off & (BITS_PER_LONG - 1)) != 0)
return -EINVAL;
+ /* a null catmap is equivalent to an empty one */
+ if (!catmap) {
+ *offset = (u32)-1;
+ return 0;
+ }
+
if (off < catmap->startbit) {
off = catmap->startbit;
*offset = off;
From: Linus Torvalds <[email protected]>
commit adc71920969870dfa54e8f40dac8616284832d02 upstream.
gcc-10 now warns about passing aliasing pointers to functions that take
restricted pointers.
That's actually a great warning, and if we ever start using 'restrict'
in the kernel, it might be quite useful. But right now we don't, and it
turns out that the only thing this warns about is an idiom where we have
declared a few functions to be "printf-like" (which seems to make gcc
pick up the restricted pointer thing), and then we print to the same
buffer that we also use as an input.
And people do that as an odd concatenation pattern, with code like this:
#define sysfs_show_gen_prop(buffer, fmt, ...) \
snprintf(buffer, PAGE_SIZE, "%s"fmt, buffer, __VA_ARGS__)
where we have 'buffer' as both the destination of the final result, and
as the initial argument.
Yes, it's a bit questionable. And outside of the kernel, people do have
standard declarations like
int snprintf( char *restrict buffer, size_t bufsz,
const char *restrict format, ... );
where that output buffer is marked as a restrict pointer that cannot
alias with any other arguments.
But in the context of the kernel, that 'use snprintf() to concatenate to
the end result' does work, and the pattern shows up in multiple places.
And we have not marked our own version of snprintf() as taking restrict
pointers, so the warning is incorrect for now, and gcc picks it up on
its own.
If we do start using 'restrict' in the kernel (and it might be a good
idea if people find places where it matters), we'll need to figure out
how to avoid this issue for snprintf and friends. But in the meantime,
this warning is not useful.
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
Makefile | 3 +++
1 file changed, 3 insertions(+)
--- a/Makefile
+++ b/Makefile
@@ -802,6 +802,9 @@ KBUILD_CFLAGS += $(call cc-disable-warni
KBUILD_CFLAGS += $(call cc-disable-warning, array-bounds)
KBUILD_CFLAGS += $(call cc-disable-warning, stringop-overflow)
+# Another good warning that we'll want to enable eventually
+KBUILD_CFLAGS += $(call cc-disable-warning, restrict)
+
# Enabled with W=2, disabled by default as noisy
KBUILD_CFLAGS += $(call cc-disable-warning, maybe-uninitialized)
On Mon, 18 May 2020 at 23:13, Greg Kroah-Hartman
<[email protected]> wrote:
>
> This is the start of the stable review cycle for the 4.9.224 release.
> There are 90 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed, 20 May 2020 17:32:42 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.9.224-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.9.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
Results from Linaro’s test farm.
No regressions on arm64, arm, x86_64, and i386.
Summary
------------------------------------------------------------------------
kernel: 4.9.224-rc1
git repo: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
git branch: linux-4.9.y
git commit: 7cb03e23d3f596ac9f89bee7cc836eb292321418
git describe: v4.9.223-91-g7cb03e23d3f5
Test details: https://qa-reports.linaro.org/lkft/linux-stable-rc-4.9-oe/build/v4.9.223-91-g7cb03e23d3f5
No regressions (compared to build v4.9.223)
No fixes (compared to build v4.9.223)
Ran 31444 total tests in the following environments and test suites.
Environments
--------------
- dragonboard-410c - arm64
- hi6220-hikey - arm64
- i386
- juno-r2 - arm64
- juno-r2-compat
- juno-r2-kasan
- qemu_arm
- qemu_arm64
- qemu_i386
- qemu_x86_64
- x15 - arm
- x86_64
- x86-kasan
Test Suites
-----------
* build
* install-android-platform-tools-r2600
* install-android-platform-tools-r2800
* kselftest
* kselftest/drivers
* kselftest/filesystems
* libhugetlbfs
* linux-log-parser
* ltp-cap_bounds-tests
* ltp-commands-tests
* ltp-containers-tests
* ltp-cpuhotplug-tests
* ltp-crypto-tests
* ltp-cve-tests
* ltp-dio-tests
* ltp-fcntl-locktests-tests
* ltp-filecaps-tests
* ltp-fs-tests
* ltp-fs_bind-tests
* ltp-fs_perms_simple-tests
* ltp-fsx-tests
* ltp-hugetlb-tests
* ltp-io-tests
* ltp-ipc-tests
* ltp-math-tests
* ltp-mm-tests
* ltp-nptl-tests
* ltp-pty-tests
* ltp-sched-tests
* ltp-securebits-tests
* ltp-syscalls-tests
* perf
* v4l2-compliance
* kvm-unit-tests
* network-basic-tests
* ltp-open-posix-tests
* kselftest/net
* kselftest/networking
* kselftest-vsyscall-mode-native
* kselftest-vsyscall-mode-native/drivers
* kselftest-vsyscall-mode-native/filesystems
* kselftest-vsyscall-mode-none
* kselftest-vsyscall-mode-none/drivers
* kselftest-vsyscall-mode-none/filesystems
--
Linaro LKFT
https://lkft.linaro.org
On 18/05/2020 18:35, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.9.224 release.
> There are 90 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed, 20 May 2020 17:32:42 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.9.224-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.9.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
All tests are passing for Tegra ...
Test results for stable-v4.9:
8 builds: 8 pass, 0 fail
16 boots: 16 pass, 0 fail
24 tests: 24 pass, 0 fail
Linux version: 4.9.224-rc1-g6b0209f7a185
Boards tested: tegra124-jetson-tk1, tegra20-ventana,
tegra210-p2371-2180, tegra30-cardhu-a04
Cheers
Jon
--
nvpublic
On 5/18/20 11:35 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.9.224 release.
> There are 90 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed, 20 May 2020 17:32:42 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.9.224-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.9.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
>
Compiled and booted on my test system. No dmesg regressions.
thanks,
-- Shuah
On 5/18/20 10:35 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.9.224 release.
> There are 90 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed, 20 May 2020 17:32:42 +0000.
> Anything received after that time might be too late.
>
Build results:
total: 171 pass: 171 fail: 0
Qemu test results:
total: 384 pass: 384 fail: 0
Guenter