ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.5/2.5.70/2.5.70-mm2/
. A couple more locking mistakes in ext3 have been fixed.
. There is some code here to make ext3's journalled-data mode work again.
2.4's data=journal code has horrid hacks to cope with MAP_SHARED pages.
These did not survive the changes in the 2.5 writeback protocols.
What I have done here is to actually properly journal these pages rather
than treating them as ordered-mode data. This made things start to work
again, and journalled data mode appears to be solid.
It has only been tested with blocksize == PAGE_CACHE_SIZE, and is
probably buggy with smaller blocks at this time.
. There is a patch here which makes a fairly fundamental change to the way
in which the kernel handles O_SYNC writes.
Traditionally Linux has held the inode semaphore while waiting for the
I/O to complete. And it writes _all_ the file's dirty data, regardless of
how much data the write() caller wrote.
The patch here arranges for the O_SYNC writer to only write the pages
which he actually dirtied. And it moves the waiting for I/O completion
outside the inode semaphore, so other writers can get in and submit their
I/O.
All this is designed to speed up the situation where multiple processes
or threads are submitting O_SYNC writes to the same file. Databases. It
speeds things up because the various writers can get more data into the
disk queueing code, so it can optimise the seek distances.
A few simple O_SYNC-based tests showed speedups from 15% to 400%,
depending upon the access patterns and the number of writing threads. The
more threads the better.
If the application uses fsync() this change will provide no benefit.
This patch halves WimMark throughput. That is quite nonsensical.
Needs lots of testing.
Changes since 2.5.70-mm1:
linus.patch
Latest -bk
+coda-typo-fix.patch
coda BUGfix
+pccardd-suspend-fix.patch
swsusp fix
+resume-oops-fix.patch
another swsusp fix
+common-ioctl32.patch
+ioctl32-cleanup-sparc64.patch
+ioctl32-cleanup-x86_64.patch
Consolidation of 32-bit ioctl compat code
+export-mmu_cr4_features.patch
export a missing symbol for DRM
+visws-irq-update.patch
visws fixes
+lru_cache_add-check.patch
debug check
+fb-image-depth-fix.patch
framebuffer fix
+zoran_procfs-copy-user-fix.patch
don't do memcpy() on user pointers.
-ext3-journalled-data-assertion-fix.patch
merged into other patches
+write_one_page-cleanup.patch
minor cleanups
+deadline-hash-removal-fix.patch
deadline elevator fix
+as-hash-removal-fix.patch
anticipatory scheduler fix
+as-jumbo-patch-for-scsi.patch
Lots of changes to address interoperation between the anticipatory
scheduler and tagged-command-queueing disks. I wasn't supposed to release
this one yet. Oh well.
+cfq-hash-removal-fix.patch
CFQ scheduler fix
+blk-invert-watermarks.patch
cleanup relative to per-queue-nr_requests.patch
+print-build-options-on-oops.patch
Print a line in the oops output which tells whether CONFIG_PREEMPT,
CONFIG_SMP or CONFIG_DEBUG_PAGEALLOC are enabled. Might save the odd email
iteration.
-slab-scribble-negative.patch
Dropped, lost interest,
-journal_dirty_metadata-speedup.patch
moved around
+ext3-concurrent-block-inode-allocation-fix.patch
ext3 inode allocator race fix
+ext3-010-fix-journalled-data.patch
resurrect ext3 data=journal
+ext3-020-journal_dirty_metadata-speedup.patch
small speedup to a fastpath.
-lockfree-lookup_mnt.patch
Dropped. Just about all the speedup came from the simpler
vfsmount_lock.patch, so we'll run with that.
+writev-retval-fix.patch
Fix writev behaviour when some segments generate EFAULT.
+O_SYNC-speedup.patch
Move O_SYNC and IS_SYNC waits outside inode->i_sem.
+isdn-typo-fix.patch
Fix some isdn bug.
All 150 patches:
linus.patch
mm.patch
add -mmN to EXTRAVERSION
coda-typo-fix.patch
fix typo in coda
sysenter-nmi-fix-2.patch
fix bad pointer access in nmi
kgdb-ga.patch
kgdb stub for ia32 (George Anzinger's one)
kmalloc_percpu-interface-change.patch
kmalloc_percpu: interface change.
kmalloc_percpu-interface-change-warning-fix.patch
nail a warning
DEFINE_PERCPU-in-modules.patch
per-cpu support inside modules (minimal)
slab-magazine-layer.patch
magazine layer for slab
slabinfo-rework.patch
new statistics for slab
aio-random-cleanups.patch
config_spinline.patch
uninline spinlocks for profiling accuracy.
ppc64-ioctl-pci-update.patch
From: Anton Blanchard <[email protected]>
Subject: ppc64 stuff
ppc64-reloc_hide.patch
sym-do-160.patch
make the SYM driver do 160 MB/sec
irqreturn-snd-via-fix.patch
via sound irqreturn fix
irq_cpustat-cleanup.patch
irq_cpustat cleanup
config-PAGE_OFFSET.patch
Configurable kenrel/user memory split
irq-check-rate-limit.patch
IRQs: handle bad return values from handlers
irq_desc-others.patch
Fix up irq_desc initialisation for non-ia32
pccardd-suspend-fix.patch
Fix suspend with pccardd running
resume-oops-fix.patch
fix oops on resume from apm bios initiated suspend
common-ioctl32.patch
From: Pavel Machek <[email protected]>
Subject: Re: must-fix list, v5
ioctl32-cleanup-sparc64.patch
ioctl32 cleanup: sparc64
ioctl32-cleanup-x86_64.patch
ioctl32 cleanup: sparc64
export-mmu_cr4_features.patch
export mmu_cr4_features to modules
visws-irq-update.patch
[VISWS] irqreturn_t conversion
lru_cache_add-check.patch
lru_cache_add debug check
fb-image-depth-fix.patch
fbdev image depth fix
zoran_procfs-copy-user-fix.patch
zoran user-pointer fix
buffer-debug.patch
buffer.c debugging
irq_balance-fix-2.patch
irq balance logic fix
VM_RESERVED-check.patch
VM_RESERVED check
rcu-stats.patch
RCU statistics reporting
ide_setting_sem-fix.patch
reslabify-pgds-and-pmds.patch
re-slabify i386 pgd's and pmd's
i2o-leak-comment.patch
i2o memleak comment
raid5-use-right-dev-fix.patch
raid5 fix
linux-isp.patch
isp-update-1.patch
list_del-debug.patch
list_del debug check
airo-schedule-fix.patch
airo.c: don't sleep in atomic regions
synaptics-mouse-support.patch
Add Synaptics touchpad tweaking to psmouse driver
write_one_page-cleanup.patch
write_one_page() fixlets
deadline-hash-removal-fix.patch
DEADLINE: hash removal fix
resurrect-batch_requests.patch
bring back the batch_requests function
kblockd.patch
Create `kblockd' workqueue
cfq-infrastructure.patch
elevator-completion-api.patch
elevator completion API
as-iosched.patch
anticipatory I/O scheduler
as-proc-read-write.patch
AS: pgbench improvement
as-discrete-read-fifo-batches.patch
AS: discrete read fifo batches
as-sync-async.patch
AS sync/async batches
as-hash-removal-fix.patch
AS: hash removal fix
as-jumbo-patch-for-scsi.patch
AS jumbo patch (for SCSI and TCQ)
unplug-use-kblockd.patch
Use kblockd for running request queues
cfq-2.patch
CFQ scheduler, #2
CFQ: update to rq-dyn API
cfq-hash-removal-fix.patch
CFQ: hash removal fix
per-queue-nr_requests.patch
per queue nr_requests
blk-invert-watermarks.patch
blk_congestion_wait threshold cleanup
unmap-page-debugging.patch
unmap unused pages for debugging
CONFIG_DEBUG_PAGEALLOC-extras.patch
From: Manfred Spraul <[email protected]>
Subject: DEBUG_PAGEALLOC
print-build-options-on-oops.patch
print a few config options on oops
fremap-all-mappings.patch
Make all executable mappings be nonlinear
sound-irq-hack.patch
show_task-free-stack-fix.patch
show_task() fix and cleanup
put_task_struct-debug.patch
ia32-mknod64.patch
mknod64 for ia32
ext2-64-bit-special-inodes.patch
ext2: support for 64-bit device nodes
ext3-64-bit-special-inodes.patch
ext3: support for 64-bit device nodes
64-bit-dev_t-kdev_t.patch
64-bit dev_t and kdev_t
oops-dump-preceding-code.patch
i386 oops output: dump preceding code
lockmeter.patch
unlink-speedup-speedup.patch
speedp the unlink speedup
time-interpolation-infrastructure.patch
improved core support for time-interpolation
thread-info-in-task_struct.patch
allow thread_info to be allocated as part of task_struct
reinstate-task-freeing-hack-for-ia64.patch
reinstate lame task_struct (non)-refcounting hack/fix
remove-fcntl-check.patch
Remove unneeded fcntl check
ext3-no-bkl.patch
journal_get_write_access-speedup.patch
ext3-concurrent-block-inode-allocation.patch
Subject: [PATCH] concurrent block/inode allocation for EXT3
ext3-orlov-approx-counter-fix.patch
Fix orlov allocator boundary case
ext3-concurrent-block-allocation-fix-1.patch
ext3-concurrent-block-allocation-hashed.patch
Subject: Re: [PATCH] concurrent block/inode allocation for EXT3
ext3-concurrent-block-inode-allocation-fix.patch
fix ext3 inode allocator race
jbd-010-b_committed_data-race-fix.patch
Subject: Re: [Ext2-devel] [RFC] probably bug in current ext3/jbd
jbd-020-locking-schema.patch
plan JBD locking schema
jbd-030-remove-splice_lock.patch
remove jh_splice_lock
jbd-040-journal_add_journal_head-locking.patch
fine-grain journal_add_journal_head locking
jbd-045-rename-journal_unlock_journal_head.patch
rename journal_unlock_journal_head to journal_put_journal_head
jbd-050-b_frozen_data-locking.patch
Finish protection of journal_head.b_frozen_data
jbd-060-b_committed_data-locking.patch
jbd-070-b_transaction-locking.patch
implement b_transaction locking rules
jbd-080-b_next_transaction-locking.patch
Implement b_next_transaction locking rules
jbd-090-b_tnext-locking.patch
b_tnext locking
jbd-100-remove-journal_datalist_lock.patch
remove journal_datalist_lock
jbd-110-t_nr_buffers-locking.patch
t_nr_buffers locking
jbd-120-t_updates-locking.patch
t_updates locking
jbd-130-t_outstanding_credits-locking.patch
implement t_outstanding_credits locking
jbd-140-t_jcb-locking.patch
implement t_jcb locking
jbd-150-j_barrier_count-locking.patch
implement j_barrier_count locking
jbd-160-j_running_transaction-locking.patch
implement j_running_transaction locking
jbd-170-j_committing_transaction-locking.patch
implement j_committing_transaction locking
jbd-180-j_checkpoint_transactions.patch
implement j_checkpoint_transactions locking
jbd-190-j_head-locking.patch
implement journal->j_head locking
jbd-200-j_tail-locking.patch
implement journal->j_tail locking
jbd-210-j_free-locking.patch
implement journal->j_free locking
jbd-220-j_commit_sequence-locking.patch
implement journal->j_commit_sequence locking
jbd-230-j_commit_request-locking.patch
implement j_commit_request locking
jbd-240-dual-revoke-tables.patch
implement dual revoke tables.
jbd-250-remove-sleep_on.patch
remove remaining sleep_on()s
jbd-300-remove-lock_kernel-journal_c.patch
remove lock_kernel() calls from journal.c
jbd-310-remove-lock_kernel-transaction_c.patch
remove lock_kernel calls from transaction.c
jbd-400-remove-lock_journal-checkpoint_c.patch
remove lock_journal calls from checkpoint.c
jbd-410-remove-lock_journal-commit_c.patch
remove lock_journal() from commit.c
jbd-420-remove-lock_journal-journal_c.patch
remove lock_journal() calls from journal.c
jbd-430-remove-lock_journal-transaction_c.patch
remove lock_journal() calls from transaction.c
jbd-440-remove-lock_journal.patch
remove lock_journal()
jbd-510-h_credits-fix.patch
journal_release_buffer: handle credits fix
jbd-520-journal_unmap_buffer-race.patch
journal_unmap_buffer race fix
jbd-530-walk_page_buffers-race-fix.patch
ext3_writepage race fix
jbd-540-journal_try_to_free_buffers-race-fix.patch
buffer freeing non-race comment
jbd-550-locking-checks.patch
add some locking assertions
jbd-560-transaction-leak-fix.patch
transaction leak and race fix
jbd-570-transaction-state-locking.patch
additional transaction shutdown locking
ext3-010-fix-journalled-data.patch
Remove incorrect assertion from ext3
ext3-020-journal_dirty_metadata-speedup.patch
invalidate_mmap_range.patch
Interface to invalidate regions of mmaps
unregister_netdev-cleanup.patch
aio-01-retry.patch
AIO: Core retry infrastructure
aio-02-lockpage_wq.patch
AIO: Async page wait
aio-03-fs_read.patch
AIO: Filesystem aio read
aio-04-buffer_wq.patch
AIO: Async buffer wait
aio-05-fs_write.patch
AIO: Filesystem aio write
aio-05-fs_write-fix.patch
aio-06-bread_wq.patch
AIO: Async block read
aio-06-bread_wq-fix.patch
aio-07-ext2getblk_wq.patch
AIO: Async get block for ext2
aio-poll.patch
aio_poll
aio-poll: don't put extern decls in .c!
64-bit-pci_alloc_consistent.patch
support 64 bit pci_alloc_consistent
vfsmount_lock.patch
From: Maneesh Soni <[email protected]>
Subject: [patch 1/2] vfsmount_lock
proc-kcore-rework.patch
/proc/kcore fixes
syncppp-locking-fix.patch
syncppp locking fix
s390-dirty-bit-cleaning.patch
dirty bit clearing on s390.
min_free_kbytes.patch
/proc/sys/vm/min_free_kbytes
svcsock-use-after-free-fix.patch
svsock use-after-free fix
sched-hot-balancing-fix.patch
fix for CPU scheduler load distribution
writev-retval-fix.patch
Fix writev when a segment generates EFAULT
O_SYNC-speedup.patch
speed up O_SYNC writes
isdn-typo-fix.patch
Fixes trivial error in drivers/isdn/hardware/eicon/divamnt.c
Andrew Morton <[email protected]> wrote:
>
> ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.5/2.5.70/2.5.70-mm2/
urgh, sorry. It has some extra debug which will generate a storm of
warnings with ext2. Delete the below line.
diff -puN mm/page_alloc.c~x mm/page_alloc.c
--- 25/mm/page_alloc.c~x 2003-05-29 01:48:25.000000000 -0700
+++ 25-akpm/mm/page_alloc.c 2003-05-29 01:48:29.000000000 -0700
@@ -256,7 +256,6 @@ static inline void free_pages_check(cons
1 << PG_locked |
1 << PG_active |
1 << PG_reclaim |
- 1 << PG_checked |
1 << PG_writeback )))
bad_page(function, page);
if (PageDirty(page))
_
Andrew Morton <[email protected]> wrote:
>
>
> ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.5/2.5.70/2.5.70-mm2/
>
>
> . A couple more locking mistakes in ext3 have been fixed.
>
But not all of them. The below is needed on SMP.
diff -puN fs/jbd/transaction.c~x fs/jbd/transaction.c
--- 25-whoops/fs/jbd/transaction.c~x 2003-05-29 04:21:51.000000000 -0700
+++ 25-whoops-akpm/fs/jbd/transaction.c 2003-05-29 04:22:09.000000000 -0700
@@ -2077,12 +2077,13 @@ void __journal_refile_buffer(struct jour
*/
void journal_refile_buffer(journal_t *journal, struct journal_head *jh)
{
- struct buffer_head *bh;
+ struct buffer_head *bh = jh2bh(jh);
+ jbd_lock_bh_state(bh);
spin_lock(&journal->j_list_lock);
- bh = jh2bh(jh);
__journal_refile_buffer(jh);
+ jbd_unlock_bh_state(bh);
journal_remove_journal_head(bh);
spin_unlock(&journal->j_list_lock);
_
2.5.70-mm2 still crash during boot in
exactly the same way as 2.5.70-mm1.
The final oops is the same.
Helge Hafting
-----Original Message-----
From: Andrew Morton [mailto:[email protected]]
>
ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.5/2.5.70/2.5.70-
mm2/
[snip]
> Needs lots of testing.
[snip]
I for one would like to help in that testing, as might others.
Could you point to/name some effective test tools/scripts/suites
for testing your work? As it is, my testing is just normal usage,
lots of builds.
thanks
"Downing, Thomas" <[email protected]> wrote:
>
> -----Original Message-----
> From: Andrew Morton [mailto:[email protected]]
>
> >
> ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.5/2.5.70/2.5.70-
> mm2/
> [snip]
> > Needs lots of testing.
> [snip]
>
> I for one would like to help in that testing, as might others.
> Could you point to/name some effective test tools/scripts/suites
> for testing your work? As it is, my testing is just normal usage,
> lots of builds.
>
I was specifically referring to the O_SYNC changes there. That means
databases: postgresql, mysql, sapdb, etc.
Some of these use fsync()-based synchronisation and won't benefit, but they
may have compile-time or runtime options to use O_SYNC instead.
Apart from that, just using the kernel in day-to-day activity is the most
important thing. If everyone does that, and everyone is happy then by
definition this kernel is a wrap.
On Thu, 2003-05-29 at 19:36, Andrew Morton wrote:
> Some of these use fsync()-based synchronisation and won't benefit, but they
> may have compile-time or runtime options to use O_SYNC instead.
>
>
> Apart from that, just using the kernel in day-to-day activity is the most
> important thing. If everyone does that, and everyone is happy then by
> definition this kernel is a wrap.
I'm already happy with 2.5.70 :-)
I use MySQL pretty extensively, so I'll excersize that as well as
the day-to-day builds, etc. I'm on day 4 of -mm1, no problems to date.
By definition, I'm happy!
-----Original Message-----
From: Andrew Morton [mailto:[email protected]]
Sent: Thursday, May 29, 2003 1:36 PM
To: Downing, Thomas
Cc: [email protected]; [email protected]
Subject: Re: 2.5.70-mm2
"Downing, Thomas" <[email protected]> wrote:
>
> -----Original Message-----
> From: Andrew Morton [mailto:[email protected]]
>
> >
>
ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.5/2.5.70/2.5.70-
> mm2/
> [snip]
> > Needs lots of testing.
> [snip]
>
> I for one would like to help in that testing, as might others.
> Could you point to/name some effective test tools/scripts/suites
> for testing your work? As it is, my testing is just normal usage,
> lots of builds.
>
I was specifically referring to the O_SYNC changes there. That means
databases: postgresql, mysql, sapdb, etc.
Some of these use fsync()-based synchronisation and won't benefit, but they
may have compile-time or runtime options to use O_SYNC instead.
Apart from that, just using the kernel in day-to-day activity is the most
important thing. If everyone does that, and everyone is happy then by
definition this kernel is a wrap.
It seems the following compile error comes from Linus' tree:
<-- snip -->
...
CC drivers/scsi/aha1740.o
...
drivers/scsi/aha1740.c:613: syntax error at end of input
...
make[2]: *** [drivers/scsi/aha1740.o] Error 1
<-- snip -->
The culprit is the following bogus part of a patch (please _revert_ it):
--- linux-2.5.70/drivers/scsi/aha1740.c 2003-05-26 19:16:33.000000000 -0700
+++ 25/drivers/scsi/aha1740.c 2003-05-28 23:52:00.000000000 -0700
@@ -108,7 +102,6 @@ static int aha1740_proc_info(char *buffe
if (len > length)
len = length;
return len;
-}
static int aha1740_makecode(unchar *sense, unchar *status)
cu
Adrian
--
"Is there not promise of rain?" Ling Tan asked suddenly out
of the darkness. There had been need of rain for many days.
"Only a promise," Lao Er said.
Pearl S. Buck - Dragon Seed
On Thu, 2003-05-29 at 11:48, Downing, Thomas wrote:
> -----Original Message-----
> From: Andrew Morton [mailto:[email protected]]
>
> >
> ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.5/2.5.70/2.5.70-
> mm2/
> [snip]
> > Needs lots of testing.
> [snip]
>
> I for one would like to help in that testing, as might others.
> Could you point to/name some effective test tools/scripts/suites
> for testing your work? As it is, my testing is just normal usage,
> lots of builds.
http://ltp.sourceforge.net
You can get several test suites from the Linux Test Project. The main
one is LTP, but if you are more into database workload testing you may
want to give DOTS a try. Compiling LTP on mm2 gave me a pretty severe
hang about 2 min. ago but past that I don't know anything until I reboot
and try to get some more information about what's going on.
-Paul Larson
It seems the following compile error comes from Linus' tree:
<-- snip -->
...
CC drivers/scsi/NCR_D700.o
In file included from include/linux/mca.h:132,
from drivers/scsi/NCR_D700.c:99:
include/linux/mca-legacy.h:10:2: warning: #warning "MCA legacy - please
move your driver to the new sysfs api"
drivers/scsi/NCR_D700.c: In function `NCR_D700_exit':
drivers/scsi/NCR_D700.c:388: too few arguments to function `scsi_sysfs_release_attributes'
make[2]: *** [drivers/scsi/NCR_D700.o] Error 1
<-- snip -->
cu
Adrian
--
"Is there not promise of rain?" Ling Tan asked suddenly out
of the darkness. There had been need of rain for many days.
"Only a promise," Lao Er said.
Pearl S. Buck - Dragon Seed
On Thu, 2003-05-29 at 16:57, Adrian Bunk wrote:
> It seems the following compile error comes from Linus' tree:
Yes, I already have the fix (which is to add the correct argument to the
function).
James
It seems the following compile error comes from Linus' tree:
<-- snip -->
...
CC drivers/scsi/NCR53C9x.o
drivers/scsi/NCR53C9x.c: In function `esp_proc_info':
drivers/scsi/NCR53C9x.c:896: `SCpnt' undeclared (first use in this function)
drivers/scsi/NCR53C9x.c:896: (Each undeclared identifier is reported only once
drivers/scsi/NCR53C9x.c:896: for each function it appears in.)
drivers/scsi/NCR53C9x.c: In function `esp_do_data':
drivers/scsi/NCR53C9x.c:1840: warning: unused variable `flags'
make[2]: *** [drivers/scsi/NCR53C9x.o] Error 1
<-- snip -->
cu
Adrian
--
"Is there not promise of rain?" Ling Tan asked suddenly out
of the darkness. There had been need of rain for many days.
"Only a promise," Lao Er said.
Pearl S. Buck - Dragon Seed
Does 2.5.70-mm2 include the RAID1 patch posted by Niel? I'm thinking
that maybe my problems in -mm1 and the oops I saw were more AS related
than RAID1, but I'm not sure. I'll probably apply that Raid1 patch
and see how it goes.
Thanks for all your hard work Andrew!
John
"John Stoffel" <[email protected]> wrote:
>
>
> Does 2.5.70-mm2 include the RAID1 patch posted by Niel?
No. It seems that it didn't work right.
Zwane had a different fix, but afaik nobody has tried it out. Apart from
Zwane of course. And that was against raid0.
Zwane's RAID0 patch
diff -puN drivers/md/raid0.c~zwane-raid-double-free-fix drivers/md/raid0.c
--- 25/drivers/md/raid0.c~zwane-raid-double-free-fix Thu May 29 14:32:02 2003
+++ 25-akpm/drivers/md/raid0.c Thu May 29 14:32:02 2003
@@ -85,10 +85,8 @@ static int create_strip_zones (mddev_t *
conf->devlist = kmalloc(sizeof(mdk_rdev_t*)*
conf->nr_strip_zones*mddev->raid_disks,
GFP_KERNEL);
- if (!conf->devlist) {
- kfree(conf);
+ if (!conf->devlist)
return 1;
- }
memset(conf->strip_zone, 0,sizeof(struct strip_zone)*
conf->nr_strip_zones);
@@ -194,7 +192,6 @@ static int create_strip_zones (mddev_t *
return 0;
abort:
kfree(conf->devlist);
- kfree(conf->strip_zone);
return 1;
}
Neil's RAID1 patch
diff -puN drivers/md/raid1.c~neilb-raid1-double-free-fix drivers/md/raid1.c
--- 25/drivers/md/raid1.c~neilb-raid1-double-free-fix Thu May 29 14:34:23 2003
+++ 25-akpm/drivers/md/raid1.c Thu May 29 14:34:23 2003
@@ -137,7 +137,7 @@ static void put_all_bios(conf_t *conf, r
BUG();
bio_put(r1_bio->read_bio);
r1_bio->read_bio = NULL;
- }
+ } else
for (i = 0; i < conf->raid_disks; i++) {
struct bio **bio = r1_bio->write_bios + i;
if (*bio) {
Hi Andrew,
2.5.70-mm2 seems to hang while running LTP.
Here are the sysrq-t output of all the processes.
Seems to be ext3 related...
(I applied your 2 ext3 patches on top of -mm2).
Thanks,
Badari
It seems the following compile error comes from Linus' tree:
<-- snip -->
...
drivers/scsi/g_NCR5380_mmio.o(.text+0x5a0): In function
`notyet_generic_proc_info':
: multiple definition of `notyet_generic_proc_info'
drivers/scsi/g_NCR5380.o(.text+0x5a0): first defined here
drivers/scsi/g_NCR5380_mmio.o(.text+0x2d20): In function
`generic_NCR5380_proc_info':
: multiple definition of `generic_NCR5380_proc_info'
drivers/scsi/g_NCR5380.o(.text+0x2d20): first defined here
make[2]: *** [drivers/scsi/built-in.o] Error 1
<-- snip -->
cu
Adrian
--
"Is there not promise of rain?" Ling Tan asked suddenly out
of the darkness. There had been need of rain for many days.
"Only a promise," Lao Er said.
Pearl S. Buck - Dragon Seed
#
# Automatically generated make config: don't edit
#
CONFIG_X86=y
CONFIG_MMU=y
CONFIG_UID16=y
CONFIG_GENERIC_ISA_DMA=y
#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
#
# General setup
#
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_SYSCTL=y
CONFIG_LOG_BUF_SHIFT=15
# CONFIG_EMBEDDED is not set
CONFIG_FUTEX=y
CONFIG_EPOLL=y
#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_OBSOLETE_MODPARM=y
CONFIG_MODVERSIONS=y
CONFIG_KMOD=y
#
# Processor type and features
#
CONFIG_X86_PC=y
# CONFIG_X86_VOYAGER is not set
# CONFIG_X86_NUMAQ is not set
# CONFIG_X86_SUMMIT is not set
# CONFIG_X86_BIGSMP is not set
# CONFIG_X86_VISWS is not set
# CONFIG_X86_GENERICARCH is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
CONFIG_MPENTIUMIII=y
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MELAN is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP2 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
CONFIG_X86_GENERIC=y
CONFIG_X86_CMPXCHG=y
CONFIG_X86_XADD=y
CONFIG_X86_L1_CACHE_SHIFT=7
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_X86_GOOD_APIC=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_HUGETLB_PAGE=y
CONFIG_SMP=y
CONFIG_NR_CPUS=2
CONFIG_PREEMPT=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_TSC=y
CONFIG_X86_MCE=y
CONFIG_X86_MCE_NONFATAL=y
CONFIG_X86_MCE_P4THERMAL=y
# CONFIG_TOSHIBA is not set
# CONFIG_I8K is not set
CONFIG_MICROCODE=y
CONFIG_X86_MSR=y
CONFIG_X86_CPUID=y
CONFIG_EDD=y
# CONFIG_NOHIGHMEM is not set
CONFIG_HIGHMEM4G=y
# CONFIG_HIGHMEM64G is not set
# CONFIG_025GB is not set
# CONFIG_05GB is not set
CONFIG_1GB=y
# CONFIG_2GB is not set
# CONFIG_3GB is not set
CONFIG_HIGHMEM=y
CONFIG_HIGHPTE=y
# CONFIG_MATH_EMULATION is not set
CONFIG_MTRR=y
CONFIG_HAVE_DEC_LOCK=y
#
# Power management options (ACPI, APM)
#
CONFIG_PM=y
# CONFIG_SOFTWARE_SUSPEND is not set
#
# ACPI Support
#
CONFIG_ACPI=y
# CONFIG_ACPI_HT_ONLY is not set
CONFIG_ACPI_BOOT=y
CONFIG_ACPI_AC=y
CONFIG_ACPI_BATTERY=y
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_FAN=y
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_THERMAL=y
# CONFIG_ACPI_TOSHIBA is not set
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_BUS=y
CONFIG_ACPI_INTERPRETER=y
CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_PCI=y
CONFIG_ACPI_SYSTEM=y
# CONFIG_APM is not set
#
# CPU Frequency scaling
#
# CONFIG_CPU_FREQ is not set
#
# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
#
CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GODIRECT is not set
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
# CONFIG_PCI_LEGACY_PROC is not set
CONFIG_PCI_NAMES=y
CONFIG_ISA=y
# CONFIG_EISA is not set
# CONFIG_MCA is not set
# CONFIG_SCx200 is not set
CONFIG_HOTPLUG=y
#
# PCMCIA/CardBus support
#
# CONFIG_PCMCIA is not set
CONFIG_PCMCIA_PROBE=y
#
# PCI Hotplug Support
#
# CONFIG_HOTPLUG_PCI is not set
#
# Executable file formats
#
CONFIG_KCORE_ELF=y
# CONFIG_KCORE_AOUT is not set
CONFIG_BINFMT_AOUT=y
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_MISC=m
#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set
#
# Parallel port support
#
CONFIG_PARPORT=m
CONFIG_PARPORT_PC=m
CONFIG_PARPORT_PC_CML1=m
# CONFIG_PARPORT_SERIAL is not set
CONFIG_PARPORT_PC_FIFO=y
CONFIG_PARPORT_PC_SUPERIO=y
# CONFIG_PARPORT_OTHER is not set
CONFIG_PARPORT_1284=y
#
# Plug and Play support
#
CONFIG_PNP=y
CONFIG_PNP_NAMES=y
# CONFIG_PNP_DEBUG is not set
#
# Protocols
#
CONFIG_ISAPNP=y
CONFIG_PNPBIOS=y
#
# Block devices
#
CONFIG_BLK_DEV_FD=y
# CONFIG_BLK_DEV_XD is not set
CONFIG_PARIDE=m
CONFIG_PARIDE_PARPORT=m
#
# Parallel IDE high-level drivers
#
CONFIG_PARIDE_PD=m
# CONFIG_PARIDE_PCD is not set
# CONFIG_PARIDE_PF is not set
# CONFIG_PARIDE_PT is not set
# CONFIG_PARIDE_PG is not set
#
# Parallel IDE protocol modules
#
# CONFIG_PARIDE_ATEN is not set
# CONFIG_PARIDE_BPCK is not set
# CONFIG_PARIDE_BPCK6 is not set
# CONFIG_PARIDE_COMM is not set
# CONFIG_PARIDE_DSTR is not set
# CONFIG_PARIDE_FIT2 is not set
# CONFIG_PARIDE_FIT3 is not set
# CONFIG_PARIDE_EPAT is not set
# CONFIG_PARIDE_EPIA is not set
# CONFIG_PARIDE_FRIQ is not set
# CONFIG_PARIDE_FRPW is not set
# CONFIG_PARIDE_KBIC is not set
CONFIG_PARIDE_KTTI=m
# CONFIG_PARIDE_ON20 is not set
# CONFIG_PARIDE_ON26 is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
CONFIG_BLK_DEV_LOOP=m
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_RAM is not set
# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_LBD is not set
#
# ATA/ATAPI/MFM/RLL device support
#
CONFIG_IDE=y
#
# IDE, ATA and ATAPI Block devices
#
CONFIG_BLK_DEV_IDE=y
#
# Please see Documentation/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_HD_IDE is not set
# CONFIG_BLK_DEV_HD is not set
CONFIG_BLK_DEV_IDEDISK=y
CONFIG_IDEDISK_MULTI_MODE=y
# CONFIG_IDEDISK_STROKE is not set
CONFIG_BLK_DEV_IDECD=m
# CONFIG_BLK_DEV_IDEFLOPPY is not set
CONFIG_BLK_DEV_IDESCSI=m
CONFIG_IDE_TASK_IOCTL=y
#
# IDE chipset support/bugfixes
#
# CONFIG_BLK_DEV_CMD640 is not set
# CONFIG_BLK_DEV_IDEPNP is not set
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_BLK_DEV_GENERIC=y
CONFIG_IDEPCI_SHARE_IRQ=y
CONFIG_BLK_DEV_IDEDMA_PCI=y
CONFIG_BLK_DEV_IDE_TCQ=y
# CONFIG_BLK_DEV_IDE_TCQ_DEFAULT is not set
CONFIG_BLK_DEV_IDE_TCQ_DEPTH=8
# CONFIG_BLK_DEV_OFFBOARD is not set
# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
CONFIG_IDEDMA_PCI_AUTO=y
# CONFIG_IDEDMA_ONLYDISK is not set
CONFIG_BLK_DEV_IDEDMA=y
CONFIG_IDEDMA_PCI_WIP=y
# CONFIG_IDEDMA_NEW_DRIVE_LISTINGS is not set
CONFIG_BLK_DEV_ADMA=y
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_TRIFLEX is not set
# CONFIG_BLK_DEV_CY82C693 is not set
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_SC1200 is not set
CONFIG_BLK_DEV_PIIX=y
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_OPTI621 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
# CONFIG_BLK_DEV_RZ1000 is not set
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIIMAGE is not set
# CONFIG_BLK_DEV_SIS5513 is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
# CONFIG_IDE_CHIPSETS is not set
CONFIG_IDEDMA_AUTO=y
# CONFIG_IDEDMA_IVB is not set
CONFIG_BLK_DEV_IDE_MODES=y
#
# SCSI device support
#
CONFIG_SCSI=m
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=m
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=m
# CONFIG_BLK_DEV_SR_VENDOR is not set
CONFIG_CHR_DEV_SG=m
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_REPORT_LUNS=y
CONFIG_SCSI_CONSTANTS=y
# CONFIG_SCSI_LOGGING is not set
#
# SCSI low-level drivers
#
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_7000FASST is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AHA152X is not set
# CONFIG_SCSI_AHA1542 is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_IN2000 is not set
# CONFIG_SCSI_AM53C974 is not set
# CONFIG_SCSI_MEGARAID is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_CPQFCTS is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_DTC3280 is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_EATA_PIO is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_GENERIC_NCR5380 is not set
# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
CONFIG_SCSI_PPA=m
# CONFIG_SCSI_IMM is not set
# CONFIG_SCSI_IZIP_EPP16 is not set
# CONFIG_SCSI_IZIP_SLOW_CTR is not set
# CONFIG_SCSI_NCR53C406A is not set
# CONFIG_SCSI_NCR53C7xx is not set
CONFIG_SCSI_SYM53C8XX_2=m
CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
# CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set
# CONFIG_SCSI_NCR53C8XX is not set
# CONFIG_SCSI_SYM53C8XX is not set
# CONFIG_SCSI_PAS16 is not set
# CONFIG_SCSI_PCI2000 is not set
# CONFIG_SCSI_PCI2220I is not set
# CONFIG_SCSI_PSI240I is not set
# CONFIG_SCSI_QLOGIC_FAS is not set
# CONFIG_SCSI_QLOGIC_ISP is not set
# CONFIG_SCSI_QLOGIC_ISP_NEW is not set
# CONFIG_SCSI_QLOGIC_FC is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_SEAGATE is not set
# CONFIG_SCSI_SYM53C416 is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_T128 is not set
# CONFIG_SCSI_U14_34F is not set
# CONFIG_SCSI_ULTRASTOR is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
#
# Old CD-ROM drivers (not SCSI, not IDE)
#
# CONFIG_CD_NO_IDESCSI is not set
#
# Multi-device support (RAID and LVM)
#
CONFIG_MD=y
CONFIG_BLK_DEV_MD=m
CONFIG_MD_LINEAR=m
CONFIG_MD_RAID0=m
CONFIG_MD_RAID1=m
CONFIG_MD_RAID5=m
CONFIG_MD_MULTIPATH=m
CONFIG_BLK_DEV_DM=m
#
# Fusion MPT device support
#
# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support (EXPERIMENTAL)
#
# CONFIG_IEEE1394 is not set
#
# I2O device support
#
# CONFIG_I2O is not set
#
# Networking support
#
CONFIG_NET=y
#
# Networking options
#
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_NETLINK_DEV=m
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
CONFIG_UNIX=y
CONFIG_NET_KEY=m
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_IP_MROUTE is not set
# CONFIG_ARPD is not set
CONFIG_INET_ECN=y
CONFIG_SYN_COOKIES=y
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
#
# IP: Netfilter Configuration
#
CONFIG_IP_NF_CONNTRACK=m
CONFIG_IP_NF_FTP=m
CONFIG_IP_NF_IRC=m
CONFIG_IP_NF_TFTP=m
CONFIG_IP_NF_AMANDA=m
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_LIMIT=m
CONFIG_IP_NF_MATCH_MAC=m
CONFIG_IP_NF_MATCH_PKTTYPE=m
CONFIG_IP_NF_MATCH_MARK=m
CONFIG_IP_NF_MATCH_MULTIPORT=m
CONFIG_IP_NF_MATCH_TOS=m
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_DSCP=m
CONFIG_IP_NF_MATCH_AH_ESP=m
CONFIG_IP_NF_MATCH_LENGTH=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_MATCH_TCPMSS=m
CONFIG_IP_NF_MATCH_HELPER=m
CONFIG_IP_NF_MATCH_STATE=m
CONFIG_IP_NF_MATCH_CONNTRACK=m
CONFIG_IP_NF_MATCH_UNCLEAN=m
CONFIG_IP_NF_MATCH_OWNER=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_MIRROR=m
CONFIG_IP_NF_NAT=m
CONFIG_IP_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_IP_NF_NAT_LOCAL=y
CONFIG_IP_NF_NAT_SNMP_BASIC=m
CONFIG_IP_NF_NAT_IRC=m
CONFIG_IP_NF_NAT_FTP=m
CONFIG_IP_NF_NAT_TFTP=m
CONFIG_IP_NF_NAT_AMANDA=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_TOS=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_DSCP=m
CONFIG_IP_NF_TARGET_MARK=m
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_IP_NF_TARGET_TCPMSS=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
# CONFIG_IP_NF_COMPAT_IPCHAINS is not set
# CONFIG_IP_NF_COMPAT_IPFWADM is not set
CONFIG_IPV6=m
CONFIG_IPV6_PRIVACY=y
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
# CONFIG_INET6_IPCOMP is not set
#
# IPv6: Netfilter Configuration
#
CONFIG_IP6_NF_QUEUE=m
CONFIG_IP6_NF_IPTABLES=m
CONFIG_IP6_NF_MATCH_LIMIT=m
CONFIG_IP6_NF_MATCH_MAC=m
CONFIG_IP6_NF_MATCH_RT=m
CONFIG_IP6_NF_MATCH_OPTS=m
CONFIG_IP6_NF_MATCH_FRAG=m
CONFIG_IP6_NF_MATCH_HL=m
CONFIG_IP6_NF_MATCH_MULTIPORT=m
CONFIG_IP6_NF_MATCH_OWNER=m
CONFIG_IP6_NF_MATCH_MARK=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
CONFIG_IP6_NF_MATCH_AHESP=m
CONFIG_IP6_NF_MATCH_LENGTH=m
CONFIG_IP6_NF_MATCH_EUI64=m
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_LOG=m
CONFIG_IP6_NF_MANGLE=m
CONFIG_IP6_NF_TARGET_MARK=m
CONFIG_XFRM_USER=m
#
# SCTP Configuration (EXPERIMENTAL)
#
CONFIG_IPV6_SCTP__=m
CONFIG_IP_SCTP=m
# CONFIG_SCTP_ADLER32 is not set
# CONFIG_SCTP_DBG_MSG is not set
# CONFIG_SCTP_DBG_OBJCNT is not set
# CONFIG_SCTP_HMAC_NONE is not set
# CONFIG_SCTP_HMAC_SHA1 is not set
CONFIG_SCTP_HMAC_MD5=y
# CONFIG_ATM is not set
# CONFIG_VLAN_8021Q is not set
CONFIG_LLC=m
CONFIG_LLC_UI=y
CONFIG_IPX=m
# CONFIG_IPX_INTERN is not set
# CONFIG_ATALK is not set
# CONFIG_DECNET is not set
# CONFIG_BRIDGE is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_FASTROUTE is not set
# CONFIG_NET_HW_FLOWCONTROL is not set
#
# QoS and/or fair queueing
#
CONFIG_NET_SCHED=y
CONFIG_NET_SCH_CBQ=m
CONFIG_NET_SCH_HTB=m
CONFIG_NET_SCH_CSZ=m
CONFIG_NET_SCH_PRIO=m
CONFIG_NET_SCH_RED=m
CONFIG_NET_SCH_SFQ=m
CONFIG_NET_SCH_TEQL=m
CONFIG_NET_SCH_TBF=m
CONFIG_NET_SCH_GRED=m
CONFIG_NET_SCH_DSMARK=m
# CONFIG_NET_SCH_INGRESS is not set
CONFIG_NET_QOS=y
CONFIG_NET_ESTIMATOR=y
CONFIG_NET_CLS=y
CONFIG_NET_CLS_TCINDEX=m
CONFIG_NET_CLS_ROUTE4=m
CONFIG_NET_CLS_ROUTE=y
CONFIG_NET_CLS_FW=m
CONFIG_NET_CLS_U32=m
CONFIG_NET_CLS_RSVP=m
CONFIG_NET_CLS_RSVP6=m
CONFIG_NET_CLS_POLICE=y
#
# Network testing
#
CONFIG_NET_PKTGEN=m
CONFIG_NETDEVICES=y
#
# ARCnet devices
#
# CONFIG_ARCNET is not set
CONFIG_DUMMY=m
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
CONFIG_TUN=m
# CONFIG_ETHERTAP is not set
# CONFIG_NET_SB1000 is not set
#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
CONFIG_MII=m
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
CONFIG_NET_VENDOR_3COM=y
# CONFIG_EL1 is not set
# CONFIG_EL2 is not set
# CONFIG_ELPLUS is not set
# CONFIG_EL16 is not set
# CONFIG_EL3 is not set
# CONFIG_3C515 is not set
CONFIG_VORTEX=m
# CONFIG_TYPHOON is not set
# CONFIG_LANCE is not set
# CONFIG_NET_VENDOR_SMC is not set
# CONFIG_NET_VENDOR_RACAL is not set
#
# Tulip family network device support
#
# CONFIG_NET_TULIP is not set
# CONFIG_AT1700 is not set
# CONFIG_DEPCA is not set
# CONFIG_HP100 is not set
# CONFIG_NET_ISA is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_AC3200 is not set
# CONFIG_APRICOT is not set
# CONFIG_B44 is not set
# CONFIG_CS89x0 is not set
# CONFIG_DGRS is not set
# CONFIG_EEPRO100 is not set
# CONFIG_E100 is not set
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
# CONFIG_NE2K_PCI is not set
CONFIG_8139CP=m
CONFIG_8139TOO=m
# CONFIG_8139TOO_PIO is not set
# CONFIG_8139TOO_TUNE_TWISTER is not set
CONFIG_8139TOO_8129=y
# CONFIG_8139_OLD_RX_RESET is not set
CONFIG_SIS900=m
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_NET_POCKET is not set
#
# Ethernet (1000 Mbit)
#
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SK98LIN is not set
# CONFIG_TIGON3 is not set
#
# Ethernet (10000 Mbit)
#
# CONFIG_IXGB is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PLIP is not set
CONFIG_PPP=m
CONFIG_PPP_MULTILINK=y
CONFIG_PPP_FILTER=y
CONFIG_PPP_ASYNC=m
CONFIG_PPP_SYNC_TTY=m
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_BSDCOMP=m
CONFIG_PPPOE=m
# CONFIG_SLIP is not set
#
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set
#
# Token Ring devices (depends on LLC=y)
#
# CONFIG_NET_FC is not set
# CONFIG_RCPCI is not set
# CONFIG_SHAPER is not set
#
# Wan interfaces
#
# CONFIG_WAN is not set
#
# Amateur Radio support
#
# CONFIG_HAMRADIO is not set
#
# IrDA (infrared) support
#
# CONFIG_IRDA is not set
#
# ISDN subsystem
#
# CONFIG_ISDN_BOOL is not set
#
# Telephony Support
#
# CONFIG_PHONE is not set
#
# Input device support
#
CONFIG_INPUT=y
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_JOYDEV=y
# CONFIG_INPUT_TSDEV is not set
CONFIG_INPUT_EVDEV=m
# CONFIG_INPUT_EVBUG is not set
#
# Input I/O drivers
#
CONFIG_GAMEPORT=m
CONFIG_SOUND_GAMEPORT=m
CONFIG_GAMEPORT_NS558=m
# CONFIG_GAMEPORT_L4 is not set
# CONFIG_GAMEPORT_EMU10K1 is not set
# CONFIG_GAMEPORT_VORTEX is not set
# CONFIG_GAMEPORT_FM801 is not set
# CONFIG_GAMEPORT_CS461x is not set
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=y
CONFIG_SERIO_CT82C710=y
# CONFIG_SERIO_PARKBD is not set
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_INPORT is not set
# CONFIG_MOUSE_LOGIBM is not set
# CONFIG_MOUSE_PC110PAD is not set
CONFIG_INPUT_JOYSTICK=y
CONFIG_JOYSTICK_ANALOG=m
# CONFIG_JOYSTICK_A3D is not set
# CONFIG_JOYSTICK_ADI is not set
# CONFIG_JOYSTICK_COBRA is not set
# CONFIG_JOYSTICK_GF2K is not set
# CONFIG_JOYSTICK_GRIP is not set
# CONFIG_JOYSTICK_GRIP_MP is not set
# CONFIG_JOYSTICK_GUILLEMOT is not set
# CONFIG_JOYSTICK_INTERACT is not set
# CONFIG_JOYSTICK_SIDEWINDER is not set
# CONFIG_JOYSTICK_TMDC is not set
# CONFIG_JOYSTICK_IFORCE is not set
# CONFIG_JOYSTICK_WARRIOR is not set
# CONFIG_JOYSTICK_MAGELLAN is not set
# CONFIG_JOYSTICK_SPACEORB is not set
# CONFIG_JOYSTICK_SPACEBALL is not set
# CONFIG_JOYSTICK_STINGER is not set
# CONFIG_JOYSTICK_TWIDDLER is not set
# CONFIG_JOYSTICK_DB9 is not set
# CONFIG_JOYSTICK_GAMECON is not set
# CONFIG_JOYSTICK_TURBOGRAFX is not set
# CONFIG_INPUT_JOYDUMP is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
CONFIG_INPUT_MISC=y
CONFIG_INPUT_PCSPKR=y
CONFIG_INPUT_UINPUT=y
#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
# Serial drivers
#
CONFIG_SERIAL_8250=y
# CONFIG_SERIAL_8250_CONSOLE is not set
CONFIG_SERIAL_8250_EXTENDED=y
# CONFIG_SERIAL_8250_MANY_PORTS is not set
CONFIG_SERIAL_8250_SHARE_IRQ=y
# CONFIG_SERIAL_8250_DETECT_IRQ is not set
# CONFIG_SERIAL_8250_MULTIPORT is not set
CONFIG_SERIAL_8250_RSA=y
#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
CONFIG_UNIX98_PTYS=y
CONFIG_UNIX98_PTY_COUNT=256
CONFIG_PRINTER=m
# CONFIG_LP_CONSOLE is not set
CONFIG_PPDEV=m
# CONFIG_TIPAR is not set
#
# I2C support
#
CONFIG_I2C=m
CONFIG_I2C_ALGOBIT=m
# CONFIG_I2C_PHILIPSPAR is not set
# CONFIG_I2C_ELV is not set
# CONFIG_I2C_VELLEMAN is not set
# CONFIG_SCx200_ACB is not set
# CONFIG_I2C_ALGOPCF is not set
CONFIG_I2C_CHARDEV=m
#
# I2C Hardware Sensors Mainboard support
#
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_I801 is not set
CONFIG_I2C_ISA=m
CONFIG_I2C_PIIX4=m
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_VIAPRO is not set
#
# I2C Hardware Sensors Chip support
#
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_IT87 is not set
CONFIG_SENSORS_LM75=m
# CONFIG_SENSORS_VIA686A is not set
CONFIG_SENSORS_W83781D=m
CONFIG_I2C_SENSOR=m
#
# Mice
#
# CONFIG_BUSMOUSE is not set
# CONFIG_QIC02_TAPE is not set
#
# IPMI
#
CONFIG_IPMI_HANDLER=y
CONFIG_IPMI_PANIC_EVENT=y
CONFIG_IPMI_DEVICE_INTERFACE=y
CONFIG_IPMI_KCS=y
CONFIG_IPMI_WATCHDOG=y
#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
CONFIG_HW_RANDOM=y
CONFIG_NVRAM=y
CONFIG_RTC=y
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_SONYPI is not set
#
# Ftape, the floppy tape device driver
#
# CONFIG_FTAPE is not set
CONFIG_AGP=m
CONFIG_AGP_ALI=m
CONFIG_AGP_AMD=m
CONFIG_AGP_AMD_8151=m
CONFIG_AGP_INTEL=m
CONFIG_AGP_NVIDIA=m
CONFIG_AGP_SIS=m
CONFIG_AGP_SWORKS=m
CONFIG_AGP_VIA=m
CONFIG_DRM=y
CONFIG_DRM_TDFX=m
# CONFIG_DRM_GAMMA is not set
CONFIG_DRM_R128=m
CONFIG_DRM_RADEON=m
CONFIG_DRM_I810=m
CONFIG_DRM_I830=m
CONFIG_DRM_MGA=m
# CONFIG_MWAVE is not set
CONFIG_RAW_DRIVER=y
CONFIG_HANGCHECK_TIMER=m
#
# Multimedia devices
#
CONFIG_VIDEO_DEV=m
#
# Video For Linux
#
CONFIG_VIDEO_PROC_FS=y
#
# Video Adapters
#
CONFIG_VIDEO_BT848=m
# CONFIG_VIDEO_PMS is not set
# CONFIG_VIDEO_BWQCAM is not set
# CONFIG_VIDEO_CQCAM is not set
# CONFIG_VIDEO_W9966 is not set
# CONFIG_VIDEO_CPIA is not set
# CONFIG_VIDEO_SAA5249 is not set
# CONFIG_TUNER_3036 is not set
# CONFIG_VIDEO_STRADIS is not set
# CONFIG_VIDEO_ZORAN is not set
# CONFIG_VIDEO_ZR36120 is not set
# CONFIG_VIDEO_SAA7134 is not set
# CONFIG_VIDEO_MXB is not set
# CONFIG_VIDEO_DPC is not set
#
# Radio Adapters
#
# CONFIG_RADIO_CADET is not set
# CONFIG_RADIO_RTRACK is not set
# CONFIG_RADIO_RTRACK2 is not set
# CONFIG_RADIO_AZTECH is not set
# CONFIG_RADIO_GEMTEK is not set
# CONFIG_RADIO_GEMTEK_PCI is not set
# CONFIG_RADIO_MAXIRADIO is not set
# CONFIG_RADIO_MAESTRO is not set
# CONFIG_RADIO_SF16FMI is not set
# CONFIG_RADIO_TERRATEC is not set
# CONFIG_RADIO_TRUST is not set
# CONFIG_RADIO_TYPHOON is not set
# CONFIG_RADIO_ZOLTRIX is not set
#
# Digital Video Broadcasting Devices
#
# CONFIG_DVB is not set
CONFIG_VIDEO_VIDEOBUF=m
CONFIG_VIDEO_TUNER=m
CONFIG_VIDEO_BUF=m
CONFIG_VIDEO_BTCX=m
#
# File systems
#
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
CONFIG_REISERFS_FS=m
# CONFIG_REISERFS_CHECK is not set
CONFIG_REISERFS_PROC_INFO=y
CONFIG_JFS_FS=m
CONFIG_JFS_POSIX_ACL=y
# CONFIG_JFS_DEBUG is not set
CONFIG_JFS_STATISTICS=y
CONFIG_FS_POSIX_ACL=y
CONFIG_XFS_FS=m
# CONFIG_XFS_RT is not set
CONFIG_XFS_QUOTA=y
CONFIG_XFS_POSIX_ACL=y
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_QUOTA=y
CONFIG_QFMT_V1=m
CONFIG_QFMT_V2=m
CONFIG_QUOTACTL=y
# CONFIG_AUTOFS_FS is not set
CONFIG_AUTOFS4_FS=m
#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_ZISOFS_FS=m
CONFIG_UDF_FS=m
#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_NTFS_FS=m
# CONFIG_NTFS_DEBUG is not set
CONFIG_NTFS_RW=y
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
# CONFIG_DEVFS_FS is not set
CONFIG_DEVPTS_FS=y
CONFIG_DEVPTS_FS_XATTR=y
CONFIG_DEVPTS_FS_SECURITY=y
CONFIG_TMPFS=y
CONFIG_HUGETLBFS=y
CONFIG_RAMFS=y
#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
CONFIG_AFFS_FS=m
# CONFIG_HFS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
#
# Network File Systems
#
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
CONFIG_NFS_V4=y
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
CONFIG_NFSD_V4=y
CONFIG_NFSD_TCP=y
CONFIG_LOCKD=m
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
CONFIG_SUNRPC=m
CONFIG_SUNRPC_GSS=m
CONFIG_RPCSEC_GSS_KRB5=m
CONFIG_SMB_FS=m
CONFIG_SMB_NLS_DEFAULT=y
CONFIG_SMB_NLS_REMOTE="cp850"
CONFIG_CIFS=m
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_INTERMEZZO_FS is not set
# CONFIG_AFS_FS is not set
#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
CONFIG_SMB_NLS=y
CONFIG_NLS=y
#
# Native Language Support
#
CONFIG_NLS_DEFAULT="utf8"
CONFIG_NLS_CODEPAGE_437=m
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
CONFIG_NLS_CODEPAGE_850=m
CONFIG_NLS_CODEPAGE_852=m
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
CONFIG_NLS_CODEPAGE_1250=m
# CONFIG_NLS_CODEPAGE_1251 is not set
CONFIG_NLS_ISO8859_1=m
CONFIG_NLS_ISO8859_2=m
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
CONFIG_NLS_ISO8859_15=m
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=m
#
# Graphics support
#
CONFIG_FB=y
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_VGA16 is not set
CONFIG_FB_VESA=y
CONFIG_VIDEO_SELECT=y
# CONFIG_FB_HGA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_I810 is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_NEOMAGIC is not set
CONFIG_FB_3DFX=y
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_VIRTUAL is not set
#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
# CONFIG_MDA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
# CONFIG_FRAMEBUFFER_CONSOLE is not set
#
# Logo configuration
#
CONFIG_LOGO=y
CONFIG_LOGO_LINUX_MONO=y
CONFIG_LOGO_LINUX_VGA16=y
CONFIG_LOGO_LINUX_CLUT224=y
#
# Sound
#
CONFIG_SOUND=m
#
# Advanced Linux Sound Architecture
#
CONFIG_SND=m
CONFIG_SND_SEQUENCER=m
CONFIG_SND_SEQ_DUMMY=m
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
CONFIG_SND_SEQUENCER_OSS=y
CONFIG_SND_RTCTIMER=m
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
#
# Generic devices
#
CONFIG_SND_DUMMY=m
CONFIG_SND_VIRMIDI=m
# CONFIG_SND_MTPAV is not set
CONFIG_SND_SERIAL_U16550=m
CONFIG_SND_MPU401=m
#
# ISA devices
#
# CONFIG_SND_AD1816A is not set
# CONFIG_SND_AD1848 is not set
# CONFIG_SND_CS4231 is not set
# CONFIG_SND_CS4232 is not set
# CONFIG_SND_CS4236 is not set
# CONFIG_SND_ES968 is not set
# CONFIG_SND_ES1688 is not set
# CONFIG_SND_ES18XX is not set
# CONFIG_SND_GUSCLASSIC is not set
# CONFIG_SND_GUSEXTREME is not set
# CONFIG_SND_GUSMAX is not set
# CONFIG_SND_INTERWAVE is not set
# CONFIG_SND_INTERWAVE_STB is not set
# CONFIG_SND_OPTI92X_AD1848 is not set
# CONFIG_SND_OPTI92X_CS4231 is not set
# CONFIG_SND_OPTI93X is not set
# CONFIG_SND_SB8 is not set
# CONFIG_SND_SB16 is not set
# CONFIG_SND_SBAWE is not set
# CONFIG_SND_WAVEFRONT is not set
# CONFIG_SND_ALS100 is not set
# CONFIG_SND_AZT2320 is not set
# CONFIG_SND_CMI8330 is not set
# CONFIG_SND_DT019X is not set
# CONFIG_SND_OPL3SA2 is not set
# CONFIG_SND_SGALAXY is not set
#
# PCI devices
#
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS4281 is not set
CONFIG_SND_EMU10K1=m
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_YMFPCI is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_ENS1370 is not set
CONFIG_SND_ENS1371=m
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_FM801 is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
# CONFIG_SND_INTEL8X0 is not set
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_VIA82XX is not set
#
# ALSA USB devices
#
CONFIG_SND_USB_AUDIO=m
#
# Open Sound System
#
CONFIG_SOUND_PRIME=m
CONFIG_SOUND_BT878=m
# CONFIG_SOUND_CMPCI is not set
# CONFIG_SOUND_EMU10K1 is not set
# CONFIG_SOUND_FUSION is not set
# CONFIG_SOUND_CS4281 is not set
# CONFIG_SOUND_ES1370 is not set
CONFIG_SOUND_ES1371=m
# CONFIG_SOUND_ESSSOLO1 is not set
# CONFIG_SOUND_MAESTRO is not set
# CONFIG_SOUND_MAESTRO3 is not set
# CONFIG_SOUND_ICH is not set
# CONFIG_SOUND_RME96XX is not set
# CONFIG_SOUND_SONICVIBES is not set
# CONFIG_SOUND_TRIDENT is not set
# CONFIG_SOUND_MSNDCLAS is not set
# CONFIG_SOUND_MSNDPIN is not set
# CONFIG_SOUND_VIA82CXXX is not set
# CONFIG_SOUND_OSS is not set
CONFIG_SOUND_TVMIXER=m
#
# USB support
#
CONFIG_USB=m
# CONFIG_USB_DEBUG is not set
#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
CONFIG_USB_BANDWIDTH=y
CONFIG_USB_DYNAMIC_MINORS=y
#
# USB Host Controller Drivers
#
CONFIG_USB_EHCI_HCD=m
CONFIG_USB_OHCI_HCD=m
CONFIG_USB_UHCI_HCD=m
#
# USB Device Class drivers
#
CONFIG_USB_AUDIO=m
CONFIG_USB_BLUETOOTH_TTY=m
CONFIG_USB_MIDI=m
CONFIG_USB_ACM=m
CONFIG_USB_PRINTER=m
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
CONFIG_USB_STORAGE_DATAFAB=y
CONFIG_USB_STORAGE_FREECOM=y
CONFIG_USB_STORAGE_ISD200=y
CONFIG_USB_STORAGE_DPCM=y
CONFIG_USB_STORAGE_HP8200e=y
CONFIG_USB_STORAGE_SDDR09=y
CONFIG_USB_STORAGE_SDDR55=y
CONFIG_USB_STORAGE_JUMPSHOT=y
#
# USB Human Interface Devices (HID)
#
CONFIG_USB_HID=m
CONFIG_USB_HIDINPUT=y
CONFIG_HID_FF=y
CONFIG_HID_PID=y
CONFIG_LOGITECH_FF=y
# CONFIG_THRUSTMASTER_FF is not set
CONFIG_USB_HIDDEV=y
#
# USB HID Boot Protocol drivers
#
# CONFIG_USB_KBD is not set
# CONFIG_USB_MOUSE is not set
# CONFIG_USB_AIPTEK is not set
# CONFIG_USB_WACOM is not set
# CONFIG_USB_KBTAB is not set
# CONFIG_USB_POWERMATE is not set
# CONFIG_USB_XPAD is not set
#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
CONFIG_USB_SCANNER=m
# CONFIG_USB_MICROTEK is not set
# CONFIG_USB_HPUSBSCSI is not set
#
# USB Multimedia devices
#
# CONFIG_USB_DABUSB is not set
# CONFIG_USB_VICAM is not set
# CONFIG_USB_DSBR is not set
# CONFIG_USB_IBMCAM is not set
# CONFIG_USB_KONICAWC is not set
# CONFIG_USB_OV511 is not set
# CONFIG_USB_PWC is not set
# CONFIG_USB_SE401 is not set
# CONFIG_USB_STV680 is not set
#
# USB Network adaptors
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set
#
# USB port drivers
#
# CONFIG_USB_USS720 is not set
#
# USB Serial Converter support
#
CONFIG_USB_SERIAL=m
CONFIG_USB_SERIAL_GENERIC=y
CONFIG_USB_SERIAL_BELKIN=m
# CONFIG_USB_SERIAL_WHITEHEAT is not set
# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
# CONFIG_USB_SERIAL_EMPEG is not set
# CONFIG_USB_SERIAL_FTDI_SIO is not set
# CONFIG_USB_SERIAL_VISOR is not set
# CONFIG_USB_SERIAL_IPAQ is not set
# CONFIG_USB_SERIAL_IR is not set
# CONFIG_USB_SERIAL_EDGEPORT is not set
# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
# CONFIG_USB_SERIAL_KEYSPAN is not set
# CONFIG_USB_SERIAL_KLSI is not set
# CONFIG_USB_SERIAL_KOBIL_SCT is not set
# CONFIG_USB_SERIAL_MCT_U232 is not set
# CONFIG_USB_SERIAL_PL2303 is not set
# CONFIG_USB_SERIAL_SAFE is not set
# CONFIG_USB_SERIAL_CYBERJACK is not set
# CONFIG_USB_SERIAL_XIRCOM is not set
# CONFIG_USB_SERIAL_OMNINET is not set
#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_TIGL is not set
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_BRLVGER is not set
# CONFIG_USB_LCD is not set
CONFIG_USB_TEST=m
# CONFIG_USB_GADGET is not set
#
# Bluetooth support
#
# CONFIG_BT is not set
#
# Profiling support
#
# CONFIG_PROFILING is not set
#
# Kernel hacking
#
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_IOVIRT is not set
CONFIG_MAGIC_SYSRQ=y
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_SPINLINE is not set
# CONFIG_DEBUG_HIGHMEM is not set
CONFIG_KALLSYMS=y
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_KGDB is not set
CONFIG_DEBUG_INFO=y
# CONFIG_FRAME_POINTER is not set
CONFIG_X86_EXTRA_IRQS=y
CONFIG_X86_FIND_SMP_CONFIG=y
CONFIG_X86_MPPARSE=y
#
# Security options
#
CONFIG_SECURITY=y
CONFIG_SECURITY_NETWORK=y
CONFIG_SECURITY_CAPABILITIES=m
CONFIG_SECURITY_ROOTPLUG=m
#
# Cryptographic options
#
CONFIG_CRYPTO=y
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_NULL=y
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=m
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_DES=m
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_AES=m
CONFIG_CRYPTO_DEFLATE=m
CONFIG_CRYPTO_TEST=m
#
# Library routines
#
CONFIG_CRC32=m
CONFIG_ZLIB_INFLATE=m
CONFIG_ZLIB_DEFLATE=m
CONFIG_X86_SMP=y
CONFIG_X86_HT=y
CONFIG_X86_BIOS_REBOOT=y
CONFIG_X86_TRAMPOLINE=y
It seems the following compile error comes from Linus' tree:
<-- snip -->
...
CC drivers/mtd/maps/map_funcs.o
drivers/mtd/maps/map_funcs.c: In function `simple_map_read64':
drivers/mtd/maps/map_funcs.c:38: warning: implicit declaration of
function `__raw_readll'
drivers/mtd/maps/map_funcs.c: In function `simple_map_write64':
drivers/mtd/maps/map_funcs.c:65: warning: implicit declaration of
function `__raw_writell'
...
LD .tmp_vmlinux1
drivers/built-in.o(.text+0x669e8e): In function `simple_map_read64':
: undefined reference to `__raw_readll'
drivers/built-in.o(.text+0x669f74): In function `simple_map_write64':
: undefined reference to `__raw_writell'
make: *** [.tmp_vmlinux1] Error 1
<-- snip -->
The fix is simple:
--- linux-2.5.70-mm2/drivers/mtd/maps/map_funcs.c.old 2003-05-30 09:47:04.000000000 +0200
+++ linux-2.5.70-mm2/drivers/mtd/maps/map_funcs.c 2003-05-30 09:47:49.000000000 +0200
@@ -13,6 +13,7 @@
#include <asm/io.h>
#include <linux/mtd/map.h>
+#include <linux/mtd/cfi.h>
static u8 simple_map_read8(struct map_info *map, unsigned long ofs)
{
cu
Adrian
--
"Is there not promise of rain?" Ling Tan asked suddenly out
of the darkness. There had been need of rain for many days.
"Only a promise," Lao Er said.
Pearl S. Buck - Dragon Seed
Boszormenyi Zoltan <[email protected]> wrote:
>
> Hi,
>
> I am testing it now with your two extra patches.
> I started vmware but I don't notice it now. Everything is snappy.
> The system is a RH9 with upgrades. The latest errata kernel still
> stops for seconds sometimes and vmware (and rsync between two drives
> for that matter) makes a noticable performance impact. With .70-mm2,
> I can still work on other things and not wait for other things to
> finish first.
OK, thanks.
> However there are problems: Basically, the autoload fails.
> My eth0/eth1 (both use 8139too) are down.
> The iptables modules do not load so the iptables service is failing.
> When I modprobe the needed modules, the things start working.
Make sure that you've correctly enabled the "Kernel Module Loader" in the
"Loadable Mudule Support" menu.
And read the readme file in mudule-init-tools carefully. You need to build
the /etc/modprobe.conf file with all the aliases in it. It takes a bit of
fiddling, but demand-modloading does work.
> E.g. named can be started after I modprobe capabilities. I brought up
> named for example because the kernel logs messages for this one:
>
> process `rndc' is using obsolete setsockopt SO_BSDCOMPAT
> process `named' is using obsolete setsockopt SO_BSDCOMPAT
That's OK. It's just the kernel spamming the application developers ;)
> The modutils I use is from the latest rawhide (contains module-init-tools).
>
> And an interesting issue: rpm -q fails for root, works for users.
>
> # LANG=C rpm -q modutils
> rpmdb: unable to join the environment
> error: db4 error(11) from dbenv->open: Resource temporarily unavailable
> error: cannot open Packages index using db3 - Resource temporarily
> unavailable (11)
> error: cannot open Packages database in /var/lib/rpm
> package modutils is not installed
> $ rpm -q modutils
> modutils-2.4.25-2
This is a bug in rpm. It can be worked around with:
alias rpm='LD_ASSUME_KERNEL=2.2.5 rpm'
>
> Also, I have an old parallel port ZIP drive, and ppa.c does not compile:
>
> drivers/scsi/ppa.c: In function `ppa_proc_info':
> drivers/scsi/ppa.c:280: invalid operands to binary ==
> make[2]: *** [drivers/scsi/ppa.o] Error 1
>
> The line compares a struct ppa_struct* with a struct Scsi_Host *.
>
Christoph should be able to fix that one up.
On Fri, May 30, 2003 at 01:27:10AM -0700, Andrew Morton wrote:
> > The line compares a struct ppa_struct* with a struct Scsi_Host *.
> >
>
> Christoph should be able to fix that one up.
There already was a patch posted on either lkml or linux-scsi.
Christoph Hellwig wrote:
>On Fri, May 30, 2003 at 01:27:10AM -0700, Andrew Morton wrote:
>
>
>>>The line compares a struct ppa_struct* with a struct Scsi_Host *.
>>>
>>>
>>>
>>Christoph should be able to fix that one up.
>>
>>
>
>There already was a patch posted on either lkml or linux-scsi.
>
>
>
>
This one?
http://marc.theaimsgroup.com/?l=linux-kernel&m=105422080609010&w=2
Thanks. It already compiles and I will test whether it works when I get
home.
Will report monday.
Best regards,
Zolt?n
--- rc.sysinit~ 2003-05-30 10:45:01.000000000 +0200
+++ rc.sysinit 2003-05-30 10:45:01.000000000 +0200
@@ -357,7 +357,7 @@
IN_INITLOG=
fi
-if ! LC_ALL=C grep -iq nomodules /proc/cmdline 2>/dev/null && [ -f /proc/ksyms ]; then
+if ! LC_ALL=C grep -iq nomodules /proc/cmdline 2>/dev/null && [ -f /proc/modules ]; then
USEMODULES=y
fi
Boszormenyi Zoltan wrote:
> Andrew Morton wrote:
>
>> Boszormenyi Zoltan <[email protected]> wrote:
>>
>>
>>> Hi,
>>>
>>> I am testing it now with your two extra patches.
>>> I started vmware but I don't notice it now. Everything is snappy.
>>> The system is a RH9 with upgrades. The latest errata kernel still
>>> stops for seconds sometimes and vmware (and rsync between two drives
>>> for that matter) makes a noticable performance impact. With .70-mm2,
>>> I can still work on other things and not wait for other things to
>>> finish first.
>>>
>>
>>
>> OK, thanks.
>
I am running it now, it seems rock solid.
Two rsync and one "cp -ar" a 2.4 GB directory between the same two drives
are finishing faster than with RH9 kernel-smp-2.4.20-13.9. :-)
> OK. :-) However, "modprobe capability" is still not automatic.
> What is the alias line for capability? I can't figure it out myself.
> Perhaps it's not supported configuring capability
> (aka CONFIG_SECURITY_CAPABILITIES) as a module?
> It's definitely allowed...
OK, compiled as built-in, not too many problems left.
I will still have to fiddle with alias lines for USB to not complain on
boot.
I don't have any USB devices though.
Best regards,
Zolt?n B?sz?rm?nyi
Boszormenyi Zoltan wrote:
> OK, compiled as built-in, not too many problems left.
One problem is found: I enabled ACPI and disabled APM.
On poweroff, I got an oops after every service stopped.
I was able to read some lines vaguely, it wrote something about
"acpi_poweroff called", "IRQ#20 disabled", but I was not able to
write the oops down because the machine switched itself off.
Here are some info I was able to gather:
ASUS P2B-D with 2 PIII/500
# lspci -s 00:04.3
00:04.3 Bridge: Intel Corp. 82371AB/EB/MB PIIX4 ACPI (rev 02)
[root@catv-50622120 proc]# lspci -s 00:04.3 -vvv
00:04.3 Bridge: Intel Corp. 82371AB/EB/MB PIIX4 ACPI (rev 02)
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin ? routed to IRQ 9
# cat interrupts
CPU0 CPU1
0: 23121 462231 IO-APIC-edge timer
1: 2493 11 IO-APIC-edge i8042
2: 0 0 XT-PIC cascade
8: 1 0 IO-APIC-edge rtc
12: 9135 756 IO-APIC-edge i8042
14: 14296 2371 IO-APIC-edge ide0
15: 4055 1804 IO-APIC-edge ide1
16: 1 90 IO-APIC-level eth1
19: 373 4 IO-APIC-level eth0
20: 0 0 IO-APIC-level acpi
NMI: 0 0
LOC: 485147 485151
ERR: 0
MIS: 0
Best regards,
Zolt?n B?sz?rm?nyi
Badari Pulavarty <[email protected]> wrote:
>
> 2.5.70-mm2 seems to hang while running LTP.
It is actually a VFS bug. A brand new one. Here's a fix, but we should
check that it still gets all the LTP writev cases right.
A couple of ext3 bugs in -mm2 have been fixed so please don't spend time
stresstesting it until mm3.
Thanks.
The recent writev() fix broke the invariant that ->commit_write _must_ be
called after a successful ->prepare_write(). It leaves ext3 with a
transaction stuck open and the filesystem locks up.
mm/filemap.c | 5 ++---
1 files changed, 2 insertions(+), 3 deletions(-)
diff -puN mm/filemap.c~generic_file_write-commit_write-fix mm/filemap.c
--- 25/mm/filemap.c~generic_file_write-commit_write-fix 2003-05-30 04:01:19.000000000 -0700
+++ 25-akpm/mm/filemap.c 2003-05-30 04:04:11.000000000 -0700
@@ -1718,10 +1718,9 @@ generic_file_aio_write_nolock(struct kio
copied = filemap_copy_from_user_iovec(page, offset,
cur_iov, iov_base, bytes);
flush_dcache_page(page);
+ status = a_ops->commit_write(file, page, offset,
+ offset + copied);
if (likely(copied > 0)) {
- status = a_ops->commit_write(file, page, offset,
- offset + copied);
-
if (!status)
status = copied;
_
>>>>> "Andrew" == Andrew Morton <[email protected]> writes:
>> . A couple more locking mistakes in ext3 have been fixed.
Andrew> But not all of them. The below is needed on SMP.
Any hint on when -mm3 will be out, and if it will include the RAID1
patches? I haven't had time to play with -mm2, and all the stuff
floating by about problems has made me a bit hesitant to try it out.
John
"John Stoffel" <[email protected]> wrote:
>
> >>>>> "Andrew" == Andrew Morton <[email protected]> writes:
>
> >> . A couple more locking mistakes in ext3 have been fixed.
>
> Andrew> But not all of them. The below is needed on SMP.
>
> Any hint on when -mm3 will be out,
About ten hours hence, probably.
> and if it will include the RAID1 patches?
I have a raid0 patch from Neil, but no raid1 patch. I saw one drift past,
from Zwane (I think), but wasn't sure that it worked. If someone has a
raid1 fix, please send it.
> I haven't had time to play with -mm2, and all the stuff
> floating by about problems has made me a bit hesitant to try it out.
Welll ext3 has been a bit bumpy of course. It's getting better, but I
haven't yet been able to give it a 12-hour bash on the 4-way. Last time I
tried a circuit breaker conked; it lasted three hours but even ext3 needs
electricity. But three hours is very positive - it was hard testing.
I'm not testing RAID at present, partly because I'm too stoopid to
understand mdadm and partly because the box-with-18-disks heats the room up
too much. This needs to change, because of possible interaction between
the IO scheduler work and software RAID.
>> Any hint on when -mm3 will be out,
Andrew> About ten hours hence, probably.
Great, I'll take a look for it tomorrow morning if I'm lucky.
>> and if it will include the RAID1 patches?
Andrew> I have a raid0 patch from Neil, but no raid1 patch. I saw one
Andrew> drift past, from Zwane (I think), but wasn't sure that it
Andrew> worked. If someone has a raid1 fix, please send it.
Hmmm... I could have sworn that Neil sent a RAID1 patch out as well,
which was just adding an 'else' after a block. Here it is:
----------- Diffstat output ------------
./drivers/md/raid1.c | 2 +-
1 files changed, 1 insertion(+), 1 deletion(-)
diff ./drivers/md/raid1.c~current~ ./drivers/md/raid1.c
--- ./drivers/md/raid1.c~current~ 2003-05-29 11:05:03.000000000 +1000
+++ ./drivers/md/raid1.c 2003-05-29 11:05:08.000000000 +1000
@@ -137,7 +137,7 @@ static void put_all_bios(conf_t *conf, r
BUG();
bio_put(r1_bio->read_bio);
r1_bio->read_bio = NULL;
- }
+ } else
for (i = 0; i < conf->raid_disks; i++) {
struct bio **bio = r1_bio->write_bios + i;
if (*bio) {
Andrew> Welll ext3 has been a bit bumpy of course. It's getting
Andrew> better, but I haven't yet been able to give it a 12-hour bash
Andrew> on the 4-way. Last time I tried a circuit breaker conked; it
Andrew> lasted three hours but even ext3 needs electricity. But three
Andrew> hours is very positive - it was hard testing.
I've got a dual PIII 550 with 8 disks on it, so I'll see about beating
on it if I get a change. I need to take a backup anyway this
weekend...
Andrew> I'm not testing RAID at present, partly because I'm too
Andrew> stoopid to understand mdadm and partly because the
Andrew> box-with-18-disks heats the room up too much. This needs to
Andrew> change, because of possible interaction between the IO
Andrew> scheduler work and software RAID.
The mdadm is alot better than the old raid stuff for sure.
Once I get 2.5.70* up and running, I'll try out my hacks to the
Cyclades driver (and we need a patch for the Kconfig entry as well,
it's wrong in it's description) under ISA to see if I can get it
working. I'll bounce those to you and Linus if they fly.
Thanks,
John
Andrew Morton wrote:
>>
>>Any hint on when -mm3 will be out,
>
>
> About ten hours hence, probably.
>
> Welll ext3 has been a bit bumpy of course. It's getting better, but I
> haven't yet been able to give it a 12-hour bash on the 4-way. Last time I
> tried a circuit breaker conked; it lasted three hours but even ext3 needs
> electricity. But three hours is very positive - it was hard testing.
>
I run many fsx tests on mm2 on 8 way yesterday for a overnight run,
before I saw your previous post. Of course the tests failed with lots
of error messages, but the good news is the system did not hang. Looking
forward to mm3 out.