ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.10-rc1/2.6.10-rc1-mm5/
- Various updates to various things. Nothing really stands out.
- Let me be the first to report this:
*** Warning: "kgdb_irq" [drivers/serial/serial_core.ko] undefined!
*** Warning: "hotplug_path" [drivers/acpi/container.ko] undefined!
Changes since 2.6.10-rc1-mm4:
linus.patch
bk-acpi.patch
bk-agpgart.patch
bk-cifs.patch
bk-cpufreq.patch
bk-driver-core.patch
bk-drm.patch
bk-ia64.patch
bk-ide-dev.patch
bk-input.patch
bk-dtor-input.patch
bk-netdev.patch
bk-pci.patch
bk-scsi.patch
bk-watchdog.patch
External bk rtees
-ppc64-fix-g5-low-level-i2c-code.patch
-ppc64-add-hw-cpu-timebase-sync.patch
-lock-initializer-unifying-batch-2-bluetooth.patch
-lock-initializer-unifying-batch-2-networking.patch
-ext2-docs-update.patch
-ufs-docs-update.patch
-dont-divide-by-0-when-trying-to-mount-ext3.patch
Merged
+4level-highpte-fix.patch
4-level-pagetable fix for x86 highpte
+mm-restore-atomic-buffer.patch
Tweak the page allocator thresholds
-arcnet-fixes-fix.patch
Folded into arcnet-fixes.patch
+xircom_tulip_cb-build-fix.patch
Fix this net driver
+ppc32-remove-config_serial_console_baud.patch
+update-ppc-list-addresses-in-maintainers.patch
+ppc32-remove-__setup_cpu_8xx.patch
+ppc32-remove-zero-initializations-in-cpu_specs.patch
ppc32 things
+ppc64-bump-max_hwifs-in-ide-code.patch
+ppc64-fix-for-cpu-hotplug-numa.patch
+ppc64-small-of-fixes.patch
ppc64 things
-frv-fujitsu-fr-v-arch-include-files.patch
+frv-first-batch-of-fujitsu-fr-v-arch-include-files.patch
+frv-more-fujitsu-fr-v-arch-include-files.patch
+frv-yet-more-fujitsu-fr-v-arch-include-files.patch
+frv-remaining-fujitsu-fr-v-arch-include-files.patch
Missing FRV include files
+frv-change-setup_arg_pages-to-take-stack-pointer-fixes.patch
Fix up some breakage from the FRV patches
+add-cpu_relax-in-spin-loops-clean-up-barrier-for-269.patch
Missing cpu_relax()es in x86 and x86_64
+uml-use-sys_getpid-bypassing-glibc-fixes-uml-on-gentoo.patch
UML fix
+enhanced-i-o-accounting-data-patch.patch
+enhanced-memory-accounting-data-collection.patch
+enhanced-memory-accounting-data-collection-tidy.patch
Additional system accounting (I/O and memory usage)
+ext3-umount-hang.patch
Fix kjournald shutdown bug
+wacom-tablet-driver.patch
Input driver
+sparc32-fix-for-hypersparc-dma-errors.patch
sparc32 fix
+bad-naming-of-structures-and-functions-in-ext3-reservation-code.patch
Namespace cleanliness
+statfs-compat-functions-can-return-eoverflow-on-nfs.patch
Missing compat wrappers
+sysfs-fix-dropping-existing-dir.patch
sysfs fix
+force-feedback-support-for-uinput.patch
+force-feedback-support-for-uinput-cleanup.patch
Input drivers
+kmap_atomic-takes-char.patch
Make kmap_atomic() take a char* rather than a void*. So we get warnings if
someone passes a page* to kunmap_atomic().
+kmap_atomic-fallout.patch
Fix up various spurious warnings from the above. cachefs is a disaster.
+drm_memory-warning-fix.patch
drm sparc64 warning fix
+radix_tree_delete-fix.patch
Fix bug in radix_tree_delete()
+oprofile-add-check_user_page_readable.patch
+oprofile-arch-independent-code-for-stack-trace.patch
+oprofile-i386-support-for-stack-trace-sampling.patch
+oprofile-i386-support-for-stack-trace-sampling-fix.patch
+oprofile-ia64-support-for-oprofile-stack-trace.patch
+oprofile-update-alpha-for-api-changes.patch
+oprofile-update-arm-for-api-changes.patch
+oprofile-update-ppc-for-api-changes.patch
+oprofile-update-parisc-for-api-changes.patch
+oprofile-update-s390-for-api-changes.patch
+oprofile-update-sh-for-api-changes.patch
+oprofile-update-sparc64-for-api-changes.patch
oprofile support for callgraph generation
-kgdb-is-incompatible-with-kprobes.patch
Folded into kgdb-ga.patch
+kgdb-ga-fixes.patch
Fix kgdb for recent serial layer changes
-kgdb-x86_64-fix.patch
-kgdb-x86_64-serial-fix.patch
-kprobes-exception-notifier-fix-kgdb-x86_64.patch
-kgdb-ia64-fixes.patch
Folded into other kgdb patches
+sched-use-cached-current-value.patch
CPU scheduler microoptimisation
+dont-hide-thread_group_leader-from-grep.patch
code cleanup
+add-do_proc_doulonglongvec_minmax-to-sysctl-functions-fix-fix.patch
Fix CONFIG_PROCFS=n build
+v4l-bttv-update-fix.patch
+v4l-bttv-update-fix2.patch
bttv driver fixes
+crashdump-routines-for-copying-dump-pages-kmap-fiddle.patch
Teach crashdump about the kmap_atomic() change
-reiser4-sb_sync_inodes-cleanup.patch
-reiser4-allow-drop_inode-implementation-cleanup.patch
-reiser4-truncate_inode_pages_range-cleanup.patch
-reiser4-rcu-barrier-fix.patch
-reiser4-export-inode_lock-cleanup.patch
-reiser4-export-pagevec-funcs-cleanup.patch
-reiser4-4kstacks-fix.patch
-stop-reiser4-from-turning-itself-on-by-default.patch
-reiser4-doc-update.patch
-reiser4-rename-key_init.patch
-reiser4-cond_resched-build-fix.patch
-reiser4-debug-build-fix.patch
-reiser4-prefetch-warning-fix.patch
-reiser4-mode-fix.patch
-reiser4-get_context_ok-warning-fixes.patch
-reiser4-remove-debug.patch
-reiser4-spinlock-debugging-build-fix-2.patch
-reiser4-sparc64-build-fix.patch
-sys_reiser4-sparc64-build-fix.patch
-reiser4-printk-warning-fixes.patch
-reiser4-generic_acl-fix.patch
-reiser4-plugin_set_done-memleak-fix.patch
-reiser4-init-max_atom_flusers.patch
-reiser4-parse-options-reduce-stack-usage.patch
-reiser4-sparce64-warning-fix.patch
-reiser4-hardirq-build-fix.patch
-reiser4-x86_64-warning-fix.patch
-reiser4-fix-mount-option-parsing.patch
-reiser4-parse-option-cleanup.patch
-reiser4-comment-fix.patch
-reiser4-fill_super-improve-warning.patch
-reiser4-disable-pseudo.patch
I got a new reiser4 code drop. These patches disappeared.
+reiser4-kmap-atomic-fixes.patch
Fix kmap_atomic() usage in reiser4
+resier4-export-shrink_dcache_anon.patch
Missing symbol export
+mpsc-driver-patch-fix.patch
Fix mpsc-driver-patch.patch
+fbdev-add-vram-option-to-intelfb.patch
+fbdev-fix-for-using-16-pixel-wide-font-in-fb-console.patch
+fbdev-support-for-bigger-than-16x32-fonts-in-softcursor.patch
+fbdev-support-for-bigger-than-16x32-fonts-in-rivafb-cursor.patch
+fbcon-disable-fbcon-cursor-if-vt-softcursor-is-enabled.patch
+fbdev-allow-mode-change-even-if-edid-block-is-not-found.patch
+fbdev-fix-cursor-in-doublescan-mode-in-atyfb.patch
+fbdev-fix-typo-in-atyfb.patch
+fbdev-change-the-find_mode-behavior.patch
fbdev updates
+blk_sync_queue-updates-update.patch
update the update to the update to the MD update
+readpage-vs-invalidate-fix.patch
New way of handling the invalidate-vs-readpage-causes-EIO problem. This way
works.
+invalidate_inode_pages-mmap-coherency-fix.patch
Bring back the O_DIRECT-vs-buffered-vs-mmapped coherency fixes. It seems to
work OK now.
+md-documentation-mdtxt-update.patch
MD docs
-evdev-return-einval-if-read-size-is-not-multiple-of-struct-size.patch
Maintainers didn't like this.
number of patches in -mm: 464
number of changesets in external trees: 496
number of patches in -mm only: 450
total patches: 946
All 464 patches:
linus.patch
4level-core-patch.patch
4level core patch
4level-bogus-bug_on.patch
4level: remove bogus BUG_ON()
4level-fix-vmalloc-overflow.patch
4level: fix vmalloc overflow
4level-core-tweaks.patch
4level core tweaks
4level-highpte-fix.patch
4level highpte fix
4level-architecture-changes-for-alpha.patch
4level: Architecture changes for alpha
4level-architecture-changes-for-arm.patch
4level: Architecture changes for arm
4level-fixes-arm.patch
4level fixes (ARM)
4level-architecture-changes-for-cris.patch
4level: Architecture changes for cris
4level-convert-drm-to-4levels.patch
4level: convert DRM to 4levels.
4level-add-asm-generic-support-for-emulating.patch
4level: Add asm-generic support for emulating 2/3level tables.
4level-make-3level-fallback-more-type-safe.patch
4level: make 3level fallback more type safe
4level-ia64-support.patch
4level: ia64 support
4level-architecture-changes-for-i386.patch
4level: Architecture changes for i386
4level-architecture-changes-for-i386-fix.patch
4level build fix
4level-architecture-changes-for-m32r.patch
4level: Architecture changes for m32r
4level-architecture-changes-for-ppc.patch
4level: Architecture changes for ppc
4level-architecture-changes-for-ppc64.patch
4level: Architecture changes for ppc64
4level-architecture-changes-for-s390.patch
4level: Architecture changes for s390
4level-architecture-changes-for-sh.patch
4level: Architecture changes for sh
4level-architecture-changes-for-sh64.patch
4level: Architecture changes for sh64
4level-architecture-changes-for-sparc.patch
4level: Architecture changes for sparc
4level-architecture-changes-for-sparc64.patch
4level: Architecture changes for sparc64
4level-architecture-changes-for-x86_64.patch
4level: Architecture changes for x86_64
compat-syscalls-naming-standardisation.patch
compat syscalls naming standardisation
compat-syscalls-naming-standardisation-fix.patch
compat-syscalls-naming-standardisation-fix
make-sysrq-f-call-oom_kill.patch
make sysrq-F call oom_kill()
remove-contention-on-profile_lock.patch
remove contention on profile_lock
bk-acpi.patch
acpi-report-errors-in-fanc.patch
ACPI: report errors in fan.c
bk-agpgart.patch
bk-cifs.patch
bk-cpufreq.patch
bk-driver-core.patch
bk-drm.patch
bk-ia64.patch
fix-duplicate-config-for-ia64_mca_recovery.patch
Fix duplicate config for IA64_MCA_RECOVERY
bk-ide-dev.patch
bk-input.patch
bk-dtor-input.patch
bk-netdev.patch
bk-pci.patch
bk-scsi.patch
megaraid-22041-driver.patch
megaraid 2.20.4.1 Driver
bk-watchdog.patch
mm.patch
add -mmN to EXTRAVERSION
fix-smm-failures-on-e750x-systems.patch
fix SMM failures on E750x systems
mm-keep-count-of-free-areas.patch
mm: keep count of free areas
mm-higher-order-watermarks.patch
mm: higher order watermarks
mm-higher-order-watermarks-fix.patch
higher order watermarks fix
mm-teach-kswapd-about-higher-order-areas.patch
mm: teach kswapd about higher order areas
fix-o_sync-speedup-for-generic_file_write_nolock.patch
Fix O_SYNC speedup for generic_file_write_nolock
mm-restore-atomic-buffer.patch
mm: tune the page allocator thresholds
make-tree_lock-an-rwlock.patch
make mapping->tree_lock an rwlock
must-fix.patch
must fix lists update
must fix list update
mustfix update
must-fix update
mustfix lists
arcnet-fixes.patch
arcnet fixes
netpoll-fix-null-ifa_list-pointer-dereference.patch
netpoll: fix null ifa_list pointer dereference
e1000-stop-working-after-resume.patch
E1000 stop working after resume
fix-for-8023ad-shutdown-issue.patch
Fix for 802.3ad shutdown issue
x25-when-receiving-a-call-check-listening-sockets-for-matching-call-user-data.patch
X.25: When receiving a call, check listening sockets for matching call user data.
x25-remove-unused-header-files.patch
X.25: Remove unused header files
ixgb-fix-ixgb_intr-looping-checks.patch
ixgb: fix ixgb_intr looping checks
xircom_tulip_cb-build-fix.patch
xircom_tulip_cb.c build fix
ppc32-add-setup_indirect_pci_nomap-routine.patch
ppc32: add setup_indirect_pci_nomap() routine
added-mpc8555-8541-security-block-infrastructure.patch
ppc32: dded MPC8555/8541 security block infrastructure
ppc32-fix-rheap-warning.patch
ppc32: fix rheap warning
ppc32-updated-reporting-of-cpu-rev-freq-for-e500-cpus.patch
ppc32: updated reporting of CPU rev & freq for e500 CPUs
ppc32-add-performance-counters-to-cpu_spec.patch
ppc32: add performance counters to cpu_spec
ppc32-remove-config_serial_console_baud.patch
ppc32: remove CONFIG_SERIAL_CONSOLE_BAUD
update-ppc-list-addresses-in-maintainers.patch
Update ppc list addresses in MAINTAINERS
ppc32-remove-__setup_cpu_8xx.patch
ppc32: remove __setup_cpu_8xx
ppc32-remove-zero-initializations-in-cpu_specs.patch
ppc32: remove zero initializations in cpu_specs
ppc64-iseries-combine-some-mf-code.patch
ppc64: iSeries combine some MF code
ppc64-iseries-remove-trailing-white-space.patch
ppc64: iSeries remove trailing white space
ppc64-iseries-remove-some-studly-caps.patch
ppc64: iSeries remove some Studly Caps
ppc64-iseries-more-mf-cleanup.patch
ppc64: iSeries more MF cleanup
ppc64-iseries-remove-more-studly-caps-from-mf-code.patch
ppc64: iSeries remove more Studly Caps from MF code
ppc64-iseries-last-of-the-cleanups-fo-the-mf-code.patch
ppc64: iSeries last of the cleanups fo the MF code
ppc64-bump-max_hwifs-in-ide-code.patch
ppc64: Bump MAX_HWIFS in IDE code
ppc64-fix-for-cpu-hotplug-numa.patch
ppc64: Fix for cpu hotplug + NUMA
ppc64-small-of-fixes.patch
ppc64: Small OF fixes
remove-unnecessary-inclusions-of-asm-aouth.patch
Remove unnecessary inclusions of asm/a.out.h
fix-page-size-assumption-in-fork.patch
fix page size assumption in fork()
ext3-compiler-warning-fix.patch
EXT3 compiler warning fix
termio-userspace-access-error-handling.patch
Termio userspace access error handling
make-proc-kcore-conditional-on-config_mmu.patch
Make /proc/kcore conditional on CONFIG_MMU
ide_arch_obsolete_init-fix.patch
IDE_ARCH_OBSOLETE_INIT fix
out-of-line-implementation-of-find_next_bit.patch
out-of-line implementation of find_next_bit()
gp-rel-data-support.patch
GP-REL data support
vm-routine-fixes.patch
VM routine fixes
frv-fujitsu-fr-v-cpu-arch-maintainer-record.patch
FRV: Fujitsu FR-V CPU arch maintainer record
frv-fujitsu-fr-v-arch-documentation.patch
FRV: Fujitsu FR-V arch documentation
frv-fujitsu-fr-v-cpu-arch-implementation-part-1.patch
FRV: Fujitsu FR-V CPU arch implementation part 1
frv-fujitsu-fr-v-cpu-arch-implementation-part-2.patch
FRV: Fujitsu FR-V CPU arch implementation part 2
frv-fujitsu-fr-v-cpu-arch-implementation-part-3.patch
FRV: Fujitsu FR-V CPU arch implementation part 3
frv-fujitsu-fr-v-cpu-arch-implementation-part-4.patch
FRV: Fujitsu FR-V CPU arch implementation part 4
frv-fujitsu-fr-v-cpu-arch-implementation-part-5.patch
FRV: Fujitsu FR-V CPU arch implementation part 5
frv-fujitsu-fr-v-cpu-arch-implementation-part-6.patch
FRV: Fujitsu FR-V CPU arch implementation part 6
frv-fujitsu-fr-v-cpu-arch-implementation-part-7.patch
FRV: Fujitsu FR-V CPU arch implementation part 7
frv-fujitsu-fr-v-cpu-arch-implementation-part-8.patch
FRV: Fujitsu FR-V CPU arch implementation part 8
frv-fujitsu-fr-v-cpu-arch-implementation-part-9.patch
FRV: Fujitsu FR-V CPU arch implementation part 9
frv-first-batch-of-fujitsu-fr-v-arch-include-files.patch
FRV: First batch of Fujitsu FR-V arch include files
frv-more-fujitsu-fr-v-arch-include-files.patch
FRV: More Fujitsu FR-V arch include files
frv-yet-more-fujitsu-fr-v-arch-include-files.patch
FRV: Yet more Fujitsu FR-V arch include files
frv-remaining-fujitsu-fr-v-arch-include-files.patch
FRV: Remaining Fujitsu FR-V arch include files
frv-make-calibrate_delay-optional.patch
FRV: Make calibrate_delay() optional
frv-better-mmap-support-in-uclinux.patch
FRV: Better mmap support in uClinux
frv-procfs-changes-for-nommu-changes.patch
FRV: procfs changes for nommu changes
frv-change-setup_arg_pages-to-take-stack-pointer.patch
FRV: change setup_arg_pages() to take stack pointer
frv-change-setup_arg_pages-to-take-stack-pointer-fixes.patch
Fix usage of setup_arg_pages() in IA64, MIPS, S390 and Sparc64
frv-add-fdpic-elf-binary-format-driver.patch
FRV: Add FDPIC ELF binary format driver
ppc64-reloc_hide.patch
superhyway-bus-support.patch
SuperHyway bus support
add-cpu_relax-in-spin-loops-clean-up-barrier-for-269.patch
add cpu_relax() in spin loops & clean up barrier()
optimize-stack-pointer-access-reduce-register-usage.patch
x86: optimize stack pointer access (reduce register usage)
x86_64-ia32_aout-build-fix.patch
x86_64: ia32_aout-build-fix
cris-architecture-update-configuration-and-build.patch
From: "Mikael Starvik" <[email protected]>
Subject: [PATCH 1/10] CRIS architecture update - Configuration and Build
cris-architecture-update-update-simple-drivers.patch
From: "Mikael Starvik" <[email protected]>
Subject: [PATCH 2/10] CRIS architecture update - Update simple drivers
cris-architecture-update-ethernet-driver.patch
From: "Mikael Starvik" <[email protected]>
Subject: [PATCH 3/10] CRIS architecture update - Ethernet driver
cris-architecture-update-ide-driver.patch
From: "Mikael Starvik" <[email protected]>
Subject: [PATCH 4/10] CRIS architecture update - IDE driver
cris-architecture-update-add-usb-host-driver.patch
From: "Mikael Starvik" <[email protected]>
Subject: [PATCH 5/10] CRIS architecture update - Add USB host driver
cris-architecture-update-core-kernel-updates.patch
From: "Mikael Starvik" <[email protected]>
Subject: [PATCH 6/10] CRIS architecture update - Core kernel updates.
cris-architecture-update-console-setup-handling.patch
From: "Mikael Starvik" <[email protected]>
Subject: [PATCH 7/10] CRIS architecture update - Console setup handling.
cris-architecture-update-move-drivers.patch
From: "Mikael Starvik" <[email protected]>
Subject: [PATCH 8/10] CRIS architecture update - Move drivers.
cris-architecture-update-update-makefiles.patch
From: "Mikael Starvik" <[email protected]>
Subject: [PATCH 9/10] CRIS architecture update - Update Makefiles.
cris-architecture-update-update-maintainers.patch
From: "Mikael Starvik" <[email protected]>
Subject: [PATCH 10/10] CRIS architecture update - Update MAINTAINERS.
uml-use-sys_getpid-bypassing-glibc-fixes-uml-on-gentoo.patch
uml: use sys_getpid bypassing glibc (fixes UML on Gentoo)
futex_wait-fix.patch
futex_wait hang fix
enhanced-i-o-accounting-data-patch.patch
enhanced I/O accounting data patch
enhanced-memory-accounting-data-collection.patch
enhanced Memory accounting data collection
enhanced-memory-accounting-data-collection-tidy.patch
enhanced-memory-accounting-data-collection-tidy
ext3-umount-hang.patch
ext3 umount hang
wacom-tablet-driver.patch
wacom tablet driver
sparc32-fix-for-hypersparc-dma-errors.patch
sparc32: fix for HyperSPARC DMA errors
bad-naming-of-structures-and-functions-in-ext3-reservation-code.patch
"Bad" naming of structures and functions in ext3 reservation code
statfs-compat-functions-can-return-eoverflow-on-nfs.patch
statfs compat functions can return EOVERFLOW on NFS
sysfs-fix-dropping-existing-dir.patch
sysfs: fix dropping existing dir
force-feedback-support-for-uinput.patch
Force feedback support for uinput
force-feedback-support-for-uinput-cleanup.patch
force-feedback-support-for-uinput cleanup
kmap_atomic-takes-char.patch
kmap_atomic takes char*
kmap_atomic-fallout.patch
kmap_atomic fallout
drm_memory-warning-fix.patch
drm_memory.h warning fix
radix_tree_delete-fix.patch
radix_tree_delete() fix
oprofile-add-check_user_page_readable.patch
oprofile: add check_user_page_readable()
oprofile-arch-independent-code-for-stack-trace.patch
oprofile: arch-independent code for stack trace sampling
oprofile-i386-support-for-stack-trace-sampling.patch
oprofile: i386 support for stack trace sampling
oprofile-i386-support-for-stack-trace-sampling-fix.patch
oprofile-i386-support-for-stack-trace-sampling x86_64 fix
oprofile-ia64-support-for-oprofile-stack-trace.patch
oprofile: ia64 support for oprofile stack trace sampling
oprofile-update-alpha-for-api-changes.patch
oprofile: update alpha for api changes
oprofile-update-arm-for-api-changes.patch
oprofile: update arm for api changes
oprofile-update-ppc-for-api-changes.patch
oprofile: update ppc for api changes
oprofile-update-parisc-for-api-changes.patch
oprofile: update parisc for api changes
oprofile-update-s390-for-api-changes.patch
oprofile: update s390 for api changes
oprofile-update-sh-for-api-changes.patch
oprofile: update sh for api changes
oprofile-update-sparc64-for-api-changes.patch
oprofile: update sparc64 for api changes
pcmcia-17-device-model-integration.patch
pcmcia-17: device model integration
pcmcia-module_refcount-oops-fix.patch
pcmcia: module_refcount oops fix
pcmcia-18a-client_t-and-pcmcia_device-integration.patch
pcmcia-18a: client_t and pcmcia_device integration
pcmcia-18b-error-on-leftover-devices.patch
pcmcia-18b: error on leftover devices
pcmcia-19-netdevice-integration.patch
pcmcia-19: netdevice integration
kgdb-ga.patch
kgdb stub for ia32 (George Anzinger's one)
kgdbL warning fix
kgdb buffer overflow fix
kgdbL warning fix
kgdb: CONFIG_DEBUG_INFO fix
x86_64 fixes
correct kgdb.txt Documentation link (against 2.6.1-rc1-mm2)
kgdb: fix for recent gcc
kgdb warning fixes
THREAD_SIZE fixes for kgdb
Fix stack overflow test for non-8k stacks
kgdb-ga.patch fix for i386 single-step into sysenter
fix TRAP_BAD_SYSCALL_EXITS on i386
add TRAP_BAD_SYSCALL_EXITS config for i386
kgdb-is-incompatible-with-kprobes
kgdb-ga-build-fix
kgdb-ga-fixes.patch
kgdb-ga-fixes
kgdboe-netpoll.patch
kgdb-over-ethernet via netpoll
kgdboe: fix configuration of MAC address
kgdb-x86_64-support.patch
kgdb-x86_64-support.patch for 2.6.2-rc1-mm3
kgdb-x86_64-warning-fixes
kgdb-x86_64-fix
kgdb-x86_64-serial-fix
kprobes exception notifier fix
kgdb-ia64-support.patch
IA64 kgdb support
ia64 kgdb repair and cleanup
ia64 kgdb fix
kgdb: ia64 fixes
fix-cpm2-uart-driver-device-number-brain-damage.patch
Fix CPM2 uart driver device number brain damage
invalidate_inodes-speedup.patch
invalidate_inodes speedup
more invalidate_inodes speedup fixes
dev-mem-restriction-patch.patch
/dev/mem restriction patch
dev-mem-restriction-patch-allow-reads.patch
dev-mem-restriction-patch: allow reads
jbd-remove-livelock-avoidance.patch
JBD: remove livelock avoidance code in journal_dirty_data()
journal_add_journal_head-debug.patch
journal_add_journal_head-debug
list_del-debug.patch
list_del debug check
unplug-can-sleep.patch
unplug functions can sleep
firestream-warnings.patch
firestream warnings
perfctr-core.patch
perfctr: core
perfctr-i386.patch
perfctr: i386
perfctr-prescott-fix.patch
Prescott fix for perfctr
perfctr-x86_64.patch
perfctr: x86_64
perfctr-ppc.patch
perfctr: PowerPC
perfctr-ppc32-mmcr0-handling-fixes.patch
perfctr ppc32 MMCR0 handling fixes
perfctr-virtualised-counters.patch
perfctr: virtualised counters
perfctr-remap_page_range-fix.patch
virtual-perfctr-illegal-sleep.patch
virtual perfctr illegal sleep
make-perfctr_virtual-default-in-kconfig-match-recommendation.patch
Make PERFCTR_VIRTUAL default in Kconfig match recommendation in help text
perfctr-ifdef-cleanup.patch
perfctr ifdef cleanup
perfctr-update-2-6-kconfig-related-updates.patch
perfctr: Kconfig-related updates
perfctr-ppc32-preliminary-interrupt-support.patch
perfctr ppc32 preliminary interrupt support
perfctr-update-5-6-reduce-stack-usage.patch
perfctr: reduce stack usage
perfctr-interrupt-support-kconfig-fix.patch
perfctr interrupt_support Kconfig fix
perfctr-low-level-documentation.patch
perfctr low-level documentation
perfctr-inheritance-1-3-driver-updates.patch
perfctr inheritance: driver updates
perfctr-inheritance-2-3-kernel-updates.patch
perfctr inheritance: kernel updates
perfctr-inheritance-3-3-documentation-updates.patch
perfctr inheritance: documentation updates
perfctr-inheritance-locking-fix.patch
perfctr inheritance locking fix
perfctr-api-changes-first-step.patch
perfctr API changes: first step
perfctr-x86-64-ia32-emulation-fix.patch
perfctr x86-64 ia32 emulation fix
perfctr-ppc32-update.patch
perfctr ppc32 update
sched-more-agressive-wake_idle.patch
sched: more agressive wake_idle()
sched-can_migrate-exception-for-idle-cpus.patch
sched: can_migrate exception for idle cpus
sched-newidle-fix.patch
sched: newidle fix
sched-active_load_balance-fixlet.patch
sched: active_load_balance() fixlet
sched-reset-cache_hot_time.patch
sched: reset cache_hot_time
schedc-whitespace-mangler.patch
sched.c whitespace mangler
sched-alter_kthread_prio.patch
sched: alter_kthread_prio
sched-adjust_timeslice_granularity.patch
sched: adjust_timeslice_granularity
sched-add_requeue_task.patch
sched: add_requeue_task
requeue_granularity.patch
sched: requeue_granularity
sched-remove_interactive_credit.patch
sched: remove_interactive_credit
sched-use-cached-current-value.patch
sched: use cached current value
dont-hide-thread_group_leader-from-grep.patch
don't hide thread_group_leader() from grep
add-do_proc_doulonglongvec_minmax-to-sysctl-functions.patch
Add do_proc_doulonglongvec_minmax to sysctl functions
add-do_proc_doulonglongvec_minmax-to-sysctl-functions-fix.patch
add-do_proc_doulonglongvec_minmax-to-sysctl-functions-fix
add-do_proc_doulonglongvec_minmax-to-sysctl-functions-fix-fix.patch
add-do_proc_doulonglongvec_minmax-to-sysctl-functions fix 2
add-sysctl-interface-to-sched_domain-parameters.patch
Add sysctl interface to sched_domain parameters
preempt-smp.patch
improve preemption on SMP
preempt-smp-_raw_read_trylock-bias-fix.patch
preempt-smp _raw_read_trylock bias fix
preempt-cleanup.patch
preempt cleanup
preempt-cleanup-fix.patch
preempt-cleanup-fix
add-lock_need_resched.patch
add lock_need_resched()
sched-add-cond_resched_softirq.patch
sched: add cond_resched_softirq()
sched-ext3-fix-scheduling-latencies-in-ext3.patch
sched: ext3: fix scheduling latencies in ext3
break-latency-in-invalidate_list.patch
break latency in invalidate_list()
sched-vfs-fix-scheduling-latencies-in-prune_dcache-and-select_parent.patch
sched: vfs: fix scheduling latencies in prune_dcache() and select_parent()
sched-vfs-fix-scheduling-latencies-in-prune_dcache-and-select_parent-fix.patch
sched-vfs-fix-scheduling-latencies-in-prune_dcache-and-select_parent fix
sched-net-fix-scheduling-latencies-in-netstat.patch
sched: net: fix scheduling latencies in netstat
sched-net-fix-scheduling-latencies-in-__release_sock.patch
sched: net: fix scheduling latencies in __release_sock
sched-mm-fix-scheduling-latencies-in-unmap_vmas.patch
sched: mm: fix scheduling latencies in unmap_vmas()
sched-mm-fix-scheduling-latencies-in-get_user_pages.patch
sched: mm: fix scheduling latencies in get_user_pages()
sched-mm-fix-scheduling-latencies-in-filemap_sync.patch
sched: mm: fix scheduling latencies in filemap_sync()
fix-keventd-execution-dependency.patch
fix keventd execution dependency
sched-fix-scheduling-latencies-in-mttrc.patch
sched: fix scheduling latencies in mttr.c
sched-fix-scheduling-latencies-in-vgaconc.patch
sched: fix scheduling latencies in vgacon.c
sched-fix-scheduling-latencies-for-preempt-kernels.patch
sched: fix scheduling latencies for !PREEMPT kernels
idle-thread-preemption-fix.patch
idle thread preemption fix
oprofile-smp_processor_id-fixes.patch
oprofile smp_processor_id() fixes
fix-smp_processor_id-warning-in-numa_node_id.patch
Fix smp_processor_id() warning in numa_node_id()
remove-the-bkl-by-turning-it-into-a-semaphore.patch
remove the BKL by turning it into a semaphore
cpu_down-warning-fix.patch
cpu_down() warning fix
vmtrunc-truncate_count-not-atomic.patch
vmtrunc: truncate_count not atomic
vmtrunc-restore-unmap_vmas-zap_bytes.patch
vmtrunc: restore unmap_vmas zap_bytes
vmtrunc-unmap_mapping_range_tree.patch
vmtrunc: unmap_mapping_range_tree
vmtrunc-unmap_mapping-dropping-i_mmap_lock.patch
vmtrunc: unmap_mapping dropping i_mmap_lock
vmtrunc-vm_truncate_count-race-caution.patch
vmtrunc: vm_truncate_count race caution
vmtrunc-bug-if-page_mapped.patch
vmtrunc: bug if page_mapped
vmtrunc-restart_addr-in-truncate_count.patch
vmtrunc: restart_addr in truncate_count
v4l-yet-another-video-buf-interface-update.patch
v4l: yet another video-buf interface update
v4l-add-video-buf-dvbc.patch
v4l: add video-buf-dvb.c
v4l-bttv-update.patch
v4l: bttv update
v4l-bttv-update-fix.patch
bttv static build fix
v4l-bttv-update-fix2.patch
remove stale bttv_parse prototype
v4l-saa7134-update.patch
v4l: saa7134 update
v4l-cx88-update.patch
v4l: cx88 update
v4l-saa7146-update.patch
v4l: saa7146 update
v4l-tuner-modparam.patch
v4l: tuner modparam
v4l-ir-common-modparam.patch
v4l: ir-common modparam
v4l-v4l1-compat-modparam.patch
v4l: v4l1-compat modparam
v4l-msp3400-fix.patch
v4l: msp3400 fix
media-video-bw-qcamc-remove-an-unused-function.patch
media/video/bw-qcam.c: remove an unused function
linux-2.6.8.1-49-rpc_workqueue.patch
nfs: RPC: Convert rpciod into a work queue for greater flexibility
linux-2.6.8.1-50-rpc_queue_lock.patch
nfs: RPC: Remove the rpc_queue_lock global spinlock
allow-modular-ide-pnp.patch
allow modular ide-pnp
allow-x86_64-to-reenable-interrupts-on-contention.patch
Allow x86_64 to reenable interrupts on contention
i386-cpu-hotplug-updated-for-mm.patch
i386 CPU hotplug updated for -mm
serialize-access-to-ide-devices.patch
serialize access to ide devices
disable-atykb-warning.patch
disable atykb "too many keys pressed" warning
export-file_ra_state_init-again.patch
Export file_ra_state_init() again
cachefs-filesystem.patch
CacheFS filesystem
cachefs-release-search-records-lest-they-return-to-haunt-us.patch
CacheFS: release search records lest they return to haunt us
fix-64-bit-problems-in-cachefs.patch
Fix 64-bit problems in cachefs
cachefs-fixed-typos-that-cause-wrong-pointer-to-be-kunmapped.patch
cachefs: fixed typos that cause wrong pointer to be kunmapped
cachefs-return-the-right-error-upon-invalid-mount.patch
CacheFS: return the right error upon invalid mount
fix-cachefs-barrier-handling-and-other-kernel-discrepancies.patch
Fix CacheFS barrier handling and other kernel discrepancies
remove-error-from-linux-cachefsh.patch
Remove #error from linux/cachefs.h
cachefs-warning-fix-2.patch
cachefs warning fix 2
cachefs-linkage-fix-2.patch
cachefs linkage fix
cachefs-build-fix.patch
cachefs build fix
cachefs-documentation.patch
CacheFS documentation
add-page-becoming-writable-notification.patch
Add page becoming writable notification
provide-a-filesystem-specific-syncable-page-bit.patch
Provide a filesystem-specific sync'able page bit
provide-a-filesystem-specific-syncable-page-bit-fix.patch
provide-a-filesystem-specific-syncable-page-bit-fix
provide-a-filesystem-specific-syncable-page-bit-fix-2.patch
provide-a-filesystem-specific-syncable-page-bit-fix-2
make-afs-use-cachefs.patch
Make AFS use CacheFS
afs-cachefs-dependency-fix.patch
afs-cachefs-dependency-fix
split-general-cache-manager-from-cachefs.patch
Split general cache manager from CacheFS
turn-cachefs-into-a-cache-backend.patch
Turn CacheFS into a cache backend
rework-the-cachefs-documentation-to-reflect-fs-cache-split.patch
Rework the CacheFS documentation to reflect FS-Cache split
update-afs-client-to-reflect-cachefs-split.patch
Update AFS client to reflect CacheFS split
assign_irq_vector-section-fix.patch
assign_irq_vector __init section fix
kexec-i8259-shutdowni386.patch
kexec: i8259-shutdown.i386
kexec-i8259-shutdown-x86_64.patch
kexec: x86_64 i8259 shutdown
kexec-apic-virtwire-on-shutdowni386patch.patch
kexec: apic-virtwire-on-shutdown.i386.patch
kexec-apic-virtwire-on-shutdownx86_64.patch
kexec: apic-virtwire-on-shutdown.x86_64
kexec-ioapic-virtwire-on-shutdowni386.patch
kexec: ioapic-virtwire-on-shutdown.i386
kexec-ioapic-virtwire-on-shutdownx86_64.patch
kexec: ioapic-virtwire-on-shutdown.x86_64
kexec-e820-64bit.patch
kexec: e820-64bit
kexec-kexec-generic.patch
kexec: kexec-generic
kexec-ide-spindown-fix.patch
kexec-ide-spindown-fix
kexec-ifdef-cleanup.patch
kexec ifdef cleanup
kexec-machine_shutdownx86_64.patch
kexec: machine_shutdown.x86_64
kexec-kexecx86_64.patch
kexec: kexec.x86_64
kexec-kexecx86_64-4level-fix.patch
kexec-kexecx86_64-4level-fix
kexec-machine_shutdowni386.patch
kexec: machine_shutdown.i386
kexec-kexeci386.patch
kexec: kexec.i386
kexec-use_mm.patch
kexec: use_mm
kexec-loading-kernel-from-non-default-offset.patch
kexec: loading kernel from non-default offset
kexec-loading-kernel-from-non-default-offset-fix.patch
kdump: fix bss compile error
kexec-enabling-co-existence-of-normal-kexec-kernel-and-panic-kernel.patch
kexec: nabling co-existence of normal kexec kernel and panic kernel
crashdump-documentation.patch
crashdump: documentation
crashdump-memory-preserving-reboot-using-kexec.patch
crashdump: memory preserving reboot using kexec
crashdump-routines-for-copying-dump-pages.patch
crashdump: routines for copying dump pages
crashdump-routines-for-copying-dump-pages-kmap-fiddle.patch
crashdump-routines-for-copying-dump-pages-kmap-fiddle
crashdump-kmap-build-fix.patch
crashdump kmap build fix
crashdump-register-snapshotting-before-kexec-boot.patch
crashdump: register snapshotting before kexec boot
crashdump-elf-format-dump-file-access.patch
crashdump: ELF format dump file access
crashdump-linear-raw-format-dump-file-access.patch
crashdump: linear/raw format dump file access
crashdump-minor-bug-fixes-to-kexec-crashdump-code.patch
crashdump: minor bug fixes to kexec crashdump code
crashdump-cleanups-to-the-kexec-based-crashdump-code.patch
crashdump: cleanups to the kexec based crashdump code
new-bitmap-list-format-for-cpusets.patch
new bitmap list format (for cpusets)
cpusets-big-numa-cpu-and-memory-placement.patch
cpusets - big numa cpu and memory placement
cpusets-fix-cpuset_get_dentry.patch
cpusets : fix cpuset_get_dentry()
cpusets-fix-race-in-cpuset_add_file.patch
cpusets: fix race in cpuset_add_file()
cpusets-remove-more-casts.patch
cpusets: remove more casts
cpusets-make-config_cpusets-the-default-in-sn2_defconfig.patch
cpusets: make CONFIG_CPUSETS the default in sn2_defconfig
cpusets-document-proc-status-allowed-fields.patch
cpusets: document proc status allowed fields
cpusets-dont-export-proc_cpuset_operations.patch
Cpusets - Dont export proc_cpuset_operations
cpusets-display-allowed-masks-in-proc-status.patch
cpusets: display allowed masks in proc status
cpusets-simplify-cpus_allowed-setting-in-attach.patch
cpusets: simplify cpus_allowed setting in attach
cpusets-remove-useless-validation-check.patch
cpusets: remove useless validation check
cpusets-config_cpusets-depends-on-smp.patch
Cpusets: CONFIG_CPUSETS depends on SMP
cpusets-tasks-file-simplify-format-fixes.patch
Cpusets tasks file: simplify format, fixes
cpusets-simplify-memory-generation.patch
Cpusets: simplify memory generation
cpusets-interoperate-with-hotplug-online-maps.patch
cpusets: interoperate with hotplug online maps
cpusets-alternative-fix-for-possible-race-in.patch
cpusets: alternative fix for possible race in cpuset_tasks_read()
cpusets-remove-casts.patch
cpusets: remove void* typecasts
reiser4-sb_sync_inodes.patch
reiser4: vfs: add super_operations.sync_inodes()
reiser4-allow-drop_inode-implementation.patch
reiser4: export vfs inode.c symbols
reiser4-truncate_inode_pages_range.patch
reiser4: vfs: add truncate_inode_pages_range()
reiser4-export-remove_from_page_cache.patch
reiser4: export pagecache add/remove functions to modules
reiser4-export-page_cache_readahead.patch
reiser4: export page_cache_readahead to modules
reiser4-reget-page-mapping.patch
reiser4: vfs: re-check page->mapping after calling try_to_release_page()
reiser4-rcu-barrier.patch
reiser4: add rcu_barrier() synchronization point
reiser4-export-inode_lock.patch
reiser4: export inode_lock to modules
reiser4-export-pagevec-funcs.patch
reiser4: export pagevec functions to modules
reiser4-export-radix_tree_preload.patch
reiser4: export radix_tree_preload() to modules
reiser4-radix-tree-tag.patch
reiser4: add new radix tree tag
reiser4-radix_tree_lookup_slot.patch
reiser4: add radix_tree_lookup_slot()
reiser4-aliased-dir.patch
reiser4: vfs: handle aliased directories
reiser4-kobject-umount-race.patch
reiser4: introduce filesystem kobjects
reiser4-kobject-umount-race-cleanup.patch
reiser4-kobject-umount-race-cleanup
reiser4-perthread-pages.patch
reiser4: per-thread page pools
reiser4-unstatic-kswapd.patch
reiser4: make kswapd() unstatic for debug
reiser4-include-reiser4.patch
reiser4: add to build system
reiser4-doc.patch
reiser4: documentation
reiser4-only.patch
reiser4: main fs
reiser4-kmap-atomic-fixes.patch
reiser4 kmap_atomic fixes
resier4-export-shrink_dcache_anon.patch
resier4: export shrink_dcache_anon
reiser4-disable-repacker.patch
reiser4 disable-repacker.patch
add-acpi-based-floppy-controller-enumeration.patch
Add ACPI-based floppy controller enumeration.
add-acpi-based-floppy-controller-enumeration-fix.patch
add-acpi-based-floppy-controller-enumeration fix
update-acpi-floppy-enumeration.patch
update ACPI floppy enumeration
floppy-acpi-enumeration-update.patch
floppy ACPI enumeration update
possible-dcache-bug-debugging-patch.patch
Possible dcache BUG: debugging patch
3c59x-pm-fix.patch
3c59x: enable power management unconditionally
3c59x-missing-pci_disable_device.patch
3c59x: missing pci_disable_device
3c59x-use-netdev_priv.patch
3c59x: use netdev_priv
3c59x-make-use-of-generic_mii_ioctl.patch
3c59x: Make use of generic_mii_ioctl
3c59x-vortex-select-mii.patch
3c59x: VORTEX select MII
3c59x-reload-eeprom-values-at-rmmod-for-needy-cards.patch
3c59x: reload EEPROM values at rmmod for needy cards
3c59x-remove-eeprom_reset-for-3c905b.patch
3c59x: remove EEPROM_RESET for 3c905B
3c59x-support-more-ethtool_ops.patch
3c59x: support more ethtool_ops
serial-add-support-for-non-standard-xtals-to-16c950-driver.patch
serial: add support for non-standard XTALs to 16c950 driver
add-support-for-possio-gcc-aka-pcmcia-siemens-mc45.patch
Add support for Possio GCC AKA PCMCIA Siemens MC45
serial-8250-receive-lockup-fix.patch
serial: 8250 receive lockup fix
new-serial-flow-control.patch
new serial flow control
early-uart-console-support.patch
early uart console support
mpsc-driver-patch.patch
serial: MPSC driver
mpsc-driver-patch-fix.patch
serial: add PORT_MPSC to <linux/serial_core.h>
vm-pageout-throttling.patch
vm: pageout throttling
revert-allow-oem-written-modules-to-make-calls-to-ia64-oem-sal-functions.patch
revert "allow OEM written modules to make calls to ia64 OEM SAL functions"
md-add-interface-for-userspace-monitoring-of-events.patch
md: add interface for userspace monitoring of events.
fix-for-spurious-interrupts-on-e100-resume-2.patch
Fix for spurious interrupts on e100 resume 2
thinkpad-fnfx-key-driver.patch
thinkpad fn+fx key driver
make-acpi_bus_register_driver-consistent-with-pci_register_driver-again.patch
make acpi_bus_register_driver() consistent with pci_register_driver()
make-acpi_bus_register_driver-consistent-with-pci_register_driver-again-warning-fix.patch
make-acpi_bus_register_driver-consistent-with-pci_register_driver-again-warning-fix
enforce-a-gap-between-heap-and-stack.patch
Enforce a gap between heap and stack
remove-lock_section-from-x86_64-spin_lock-asm.patch
remove LOCK_SECTION from x86_64 spin_lock asm
kfree_skb-dump_stack.patch
kfree_skb-dump_stack
for-mm-only-remove-remap_page_range-completely.patch
vm: for -mm only: remove remap_page_range() completely
cancel_rearming_delayed_work.patch
cancel_rearming_delayed_work()
make-cancel_rearming_delayed_workqueue-static.patch
make cancel_rearming_delayed_workqueue static
ipvs-deadlock-fix.patch
ipvs deadlock fix
minimal-ide-disk-updates.patch
Minimal ide-disk updates
no-buddy-bitmap-patch-revist-intro-and-includes.patch
no buddy bitmap patch revist: intro and includes
no-buddy-bitmap-patch-revisit-for-mm-page_allocc.patch
no buddy bitmap patch revisit: for mm/page_alloc.c
no-buddy-bitmap-patch-revisit-for-mm-page_allocc-fix.patch
no-buddy-bitmap-patch-revisit-for-mm-page_allocc fix
no-buddy-bitmap-patch-revist-for-ia64.patch
no buddy bitmap patch revist: for ia64
no-buddy-bitmap-patch-revist-for-ia64-fix.patch
no-buddy-bitmap-patch-revist-for-ia64 fix
use-find_trylock_page-in-free_swap_and_cache-instead-of-hand-coding.patch
use find_trylock_page in free_swap_and_cache instead of hand coding
dio-handle-eof.patch
direct-IO: handle EOF
dio-handle-eof fix
o_direct-fix-again.patch
O_DIRECT fix again
fbdev-fix-io-access-in-rivafb-part-2.patch
fbdev: Fix IO access in rivafb (part 2)
fbdev-fix-mode-handling-in-rivafb-if-with-no-edid.patch
fbdev: Fix mode handling in rivafb if with no EDID
fbdev-use-soft_cursor-in-i810fb.patch
fbdev: Use soft_cursor in i810fb
fbdev-set-color-depth-to-8-if-in-pseudocolor-in-vesafb.patch
fbdev: Set color depth to 8 if in pseudocolor in vesafb.
fbcon-split-set_con2fb_map.patch
fbcon: Split set_con2fb_map()
fbdev-introduce-fb_blank_-constants.patch
fbdev: Introduce FB_BLANK_* constants
fbdev-convert-drivers-to-use-the-new-fb_blank_-constants.patch
fbdev: Convert drivers to use the new FB_BLANK_* constants
fbdev-fix-broken-fb_blank-implementation.patch
fbdev: Fix broken fb_blank() implementation.
fbdev-add-vram-option-to-intelfb.patch
fbdev: Add vram option to intelfb
fbdev-fix-for-using-16-pixel-wide-font-in-fb-console.patch
fbdev: Fix for using >16 pixel wide font in fb console
fbdev-support-for-bigger-than-16x32-fonts-in-softcursor.patch
fbdev: Support for bigger than 16x32 fonts in softcursor
fbdev-support-for-bigger-than-16x32-fonts-in-rivafb-cursor.patch
fbdev: Support for bigger than 16x32 fonts in rivafb cursor
fbcon-disable-fbcon-cursor-if-vt-softcursor-is-enabled.patch
fbcon: Disable fbcon cursor if vt softcursor is enabled
fbdev-allow-mode-change-even-if-edid-block-is-not-found.patch
fbdev: Allow mode change even if EDID block is not found
fbdev-fix-cursor-in-doublescan-mode-in-atyfb.patch
fbdev: Fix cursor in doublescan mode in atyfb
fbdev-fix-typo-in-atyfb.patch
fbdev: Fix typo in atyfb
fbdev-change-the-find_mode-behavior.patch
fbdev: Change the find_mode behavior
md-fix-problem-with-md-linear-for-devices-larger-than-2-terabytes.patch
md: fix problem with md/linear for devices larger than 2 terabytes
md-fix-raid6-problem.patch
md: fix raid6 problem
md-delete-unplug-timer-before-shutting-down-md-array.patch
md: delete unplug timer before shutting down md array
md-delete-unplug-timer-before-shutting-down-md-array-cleanup.patch
md-delete-unplug-timer-before-shutting-down-md-array-cleanup
blk_sync_queue-updates.patch
blk_sync_queue() updates
blk_sync_queue-updates-update.patch
blk_sync_queue-updates update
md-faulty-personality.patch
md: "Faulty" personality
figure-out-who-is-inserting-bogus-modules.patch
Figure out who is inserting bogus modules
use-mmiowb-in-qla1280c.patch
use mmiowb in qla1280.c
readpage-vs-invalidate-fix.patch
readpage-vs-invalidate fix
invalidate_inode_pages-mmap-coherency-fix.patch
invalidate_inode_pages2() mmap coherency fix
yenta_socketc-fix-missing-pci_disable_dev.patch
yenta_socket.c: Fix missing pci_disable_dev
yenta-dont-enable-read-prefetch-on-older-o2-bridges.patch
yenta: don't enable read prefetch on older o2 bridges.
cputime-introduce-cputime.patch
cputime: introduce cputime
cputime-introduce-cputime-fix.patch
cputime-introduce-cputime fix
cputime-fix-do_setitimer.patch
cputime: fix do_setitimer.
cputime-missing-pieces.patch
cputime: missing pieces.
detect-atomic-counter-underflows.patch
detect atomic counter underflows
lock-initializer-unifying-batch-2-alpha.patch
Lock initializer unifying: ALPHA
lock-initializer-unifying-batch-2-ia64.patch
Lock initializer unifying: IA64
lock-initializer-unifying-batch-2-m32r.patch
Lock initializer unifying: M32R
lock-initializer-unifying-batch-2-mips.patch
Lock initializer unifying: MIPS
lock-initializer-unifying-batch-2-misc-drivers.patch
Lock initializer unifying: Misc drivers
lock-initializer-unifying-batch-2-block-devices.patch
Lock initializer unifying: Block devices
lock-initializer-unifying-batch-2-drm.patch
Lock initializer unifying: DRM
lock-initializer-unifying-batch-2-character-devices.patch
Lock initializer unifying: character devices
lock-initializer-unifying-batch-2-rio.patch
Lock initializer unifying: RIO
lock-initializer-unifying-batch-2-firewire.patch
Lock initializer unifying: Firewire
lock-initializer-unifying-batch-2-isdn.patch
Lock initializer unifying: ISDN
lock-initializer-unifying-batch-2-raid.patch
Lock initializer unifying: Raid
lock-initializer-unifying-batch-2-media-drivers.patch
Lock initializer unifying: media drivers
lock-initializer-unifying-batch-2-scsi.patch
Lock initializer unifying: SCSI
lock-initializer-unifying-batch-2-drivers-serial.patch
Lock initializer unifying: drivers/serial
lock-initializer-unifying-batch-2-filesystems.patch
Lock initializer unifying: Filesystems
lock-initializer-unifying-batch-2-video.patch
Lock initializer unifying: Video
lock-initializer-unifying-batch-2-sound.patch
Lock initializer unifying: sound
remove-duplicate-safe_for_readread_buffer-entry-in-scsi_ioctlc.patch
Remove duplicate safe_for_read(READ_BUFFER) entry in scsi_ioctl.c
md-documentation-mdtxt-update.patch
md: Documentation/md.txt update
convert-module_parm-to-module_param-family.patch
convert MODULE_PARM() to module_param() family
more-module_parm-conversions.patch
more MODULE_PARM conversions
kill-lockd_symsc.patch
kill lockd_syms.c
aic-warning-fix.patch
aic warning fix
lib-parser-fix-%%-parsing.patch
lib/parser: fix %% parsing
make-cdev_get-static-unexport.patch
make cdev_get static, unexport
unexport-task_nice.patch
unexport task_nice
limit-CONFIG_LEGACY_PTY_COUNT.patch
limit CONFIG_LEGACY_PTY_COUNT
Hello there,
It looks like the file "usr/initramfs_list" gets removed when applying
the broken out patches (by "linux.patch") but the file is not removed
when the combined patch is applied...
/ magnus - nitpicking
On Thu, 2004-11-11 at 10:23, Andrew Morton wrote:
> ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.10-rc1/2.6.10-rc1-mm5/
>
>
> - Various updates to various things. Nothing really stands out.
>
> - Let me be the first to report this:
>
> *** Warning: "kgdb_irq" [drivers/serial/serial_core.ko] undefined!
> *** Warning: "hotplug_path" [drivers/acpi/container.ko] undefined!
>
>
>
>
> Changes since 2.6.10-rc1-mm4:
>
>
> linus.patch
> bk-acpi.patch
> bk-agpgart.patch
> bk-cifs.patch
> bk-cpufreq.patch
> bk-driver-core.patch
> bk-drm.patch
> bk-ia64.patch
> bk-ide-dev.patch
> bk-input.patch
> bk-dtor-input.patch
> bk-netdev.patch
> bk-pci.patch
> bk-scsi.patch
> bk-watchdog.patch
>
> External bk rtees
>
> -ppc64-fix-g5-low-level-i2c-code.patch
> -ppc64-add-hw-cpu-timebase-sync.patch
> -lock-initializer-unifying-batch-2-bluetooth.patch
> -lock-initializer-unifying-batch-2-networking.patch
> -ext2-docs-update.patch
> -ufs-docs-update.patch
> -dont-divide-by-0-when-trying-to-mount-ext3.patch
>
> Merged
>
> +4level-highpte-fix.patch
>
> 4-level-pagetable fix for x86 highpte
>
> +mm-restore-atomic-buffer.patch
>
> Tweak the page allocator thresholds
>
> -arcnet-fixes-fix.patch
>
> Folded into arcnet-fixes.patch
>
> +xircom_tulip_cb-build-fix.patch
>
> Fix this net driver
>
> +ppc32-remove-config_serial_console_baud.patch
> +update-ppc-list-addresses-in-maintainers.patch
> +ppc32-remove-__setup_cpu_8xx.patch
> +ppc32-remove-zero-initializations-in-cpu_specs.patch
>
> ppc32 things
>
> +ppc64-bump-max_hwifs-in-ide-code.patch
> +ppc64-fix-for-cpu-hotplug-numa.patch
> +ppc64-small-of-fixes.patch
>
> ppc64 things
>
> -frv-fujitsu-fr-v-arch-include-files.patch
> +frv-first-batch-of-fujitsu-fr-v-arch-include-files.patch
> +frv-more-fujitsu-fr-v-arch-include-files.patch
> +frv-yet-more-fujitsu-fr-v-arch-include-files.patch
> +frv-remaining-fujitsu-fr-v-arch-include-files.patch
>
> Missing FRV include files
>
> +frv-change-setup_arg_pages-to-take-stack-pointer-fixes.patch
>
> Fix up some breakage from the FRV patches
>
> +add-cpu_relax-in-spin-loops-clean-up-barrier-for-269.patch
>
> Missing cpu_relax()es in x86 and x86_64
>
> +uml-use-sys_getpid-bypassing-glibc-fixes-uml-on-gentoo.patch
>
> UML fix
>
> +enhanced-i-o-accounting-data-patch.patch
> +enhanced-memory-accounting-data-collection.patch
> +enhanced-memory-accounting-data-collection-tidy.patch
>
> Additional system accounting (I/O and memory usage)
>
> +ext3-umount-hang.patch
>
> Fix kjournald shutdown bug
>
> +wacom-tablet-driver.patch
>
> Input driver
>
> +sparc32-fix-for-hypersparc-dma-errors.patch
>
> sparc32 fix
>
> +bad-naming-of-structures-and-functions-in-ext3-reservation-code.patch
>
> Namespace cleanliness
>
> +statfs-compat-functions-can-return-eoverflow-on-nfs.patch
>
> Missing compat wrappers
>
> +sysfs-fix-dropping-existing-dir.patch
>
> sysfs fix
>
> +force-feedback-support-for-uinput.patch
> +force-feedback-support-for-uinput-cleanup.patch
>
> Input drivers
>
> +kmap_atomic-takes-char.patch
>
> Make kmap_atomic() take a char* rather than a void*. So we get warnings if
> someone passes a page* to kunmap_atomic().
>
> +kmap_atomic-fallout.patch
>
> Fix up various spurious warnings from the above. cachefs is a disaster.
>
> +drm_memory-warning-fix.patch
>
> drm sparc64 warning fix
>
> +radix_tree_delete-fix.patch
>
> Fix bug in radix_tree_delete()
>
> +oprofile-add-check_user_page_readable.patch
> +oprofile-arch-independent-code-for-stack-trace.patch
> +oprofile-i386-support-for-stack-trace-sampling.patch
> +oprofile-i386-support-for-stack-trace-sampling-fix.patch
> +oprofile-ia64-support-for-oprofile-stack-trace.patch
> +oprofile-update-alpha-for-api-changes.patch
> +oprofile-update-arm-for-api-changes.patch
> +oprofile-update-ppc-for-api-changes.patch
> +oprofile-update-parisc-for-api-changes.patch
> +oprofile-update-s390-for-api-changes.patch
> +oprofile-update-sh-for-api-changes.patch
> +oprofile-update-sparc64-for-api-changes.patch
>
> oprofile support for callgraph generation
>
> -kgdb-is-incompatible-with-kprobes.patch
>
> Folded into kgdb-ga.patch
>
> +kgdb-ga-fixes.patch
>
> Fix kgdb for recent serial layer changes
>
> -kgdb-x86_64-fix.patch
> -kgdb-x86_64-serial-fix.patch
> -kprobes-exception-notifier-fix-kgdb-x86_64.patch
> -kgdb-ia64-fixes.patch
>
> Folded into other kgdb patches
>
> +sched-use-cached-current-value.patch
>
> CPU scheduler microoptimisation
>
> +dont-hide-thread_group_leader-from-grep.patch
>
> code cleanup
>
> +add-do_proc_doulonglongvec_minmax-to-sysctl-functions-fix-fix.patch
>
> Fix CONFIG_PROCFS=n build
>
> +v4l-bttv-update-fix.patch
> +v4l-bttv-update-fix2.patch
>
> bttv driver fixes
>
> +crashdump-routines-for-copying-dump-pages-kmap-fiddle.patch
>
> Teach crashdump about the kmap_atomic() change
>
> -reiser4-sb_sync_inodes-cleanup.patch
> -reiser4-allow-drop_inode-implementation-cleanup.patch
> -reiser4-truncate_inode_pages_range-cleanup.patch
> -reiser4-rcu-barrier-fix.patch
> -reiser4-export-inode_lock-cleanup.patch
> -reiser4-export-pagevec-funcs-cleanup.patch
> -reiser4-4kstacks-fix.patch
> -stop-reiser4-from-turning-itself-on-by-default.patch
> -reiser4-doc-update.patch
> -reiser4-rename-key_init.patch
> -reiser4-cond_resched-build-fix.patch
> -reiser4-debug-build-fix.patch
> -reiser4-prefetch-warning-fix.patch
> -reiser4-mode-fix.patch
> -reiser4-get_context_ok-warning-fixes.patch
> -reiser4-remove-debug.patch
> -reiser4-spinlock-debugging-build-fix-2.patch
> -reiser4-sparc64-build-fix.patch
> -sys_reiser4-sparc64-build-fix.patch
> -reiser4-printk-warning-fixes.patch
> -reiser4-generic_acl-fix.patch
> -reiser4-plugin_set_done-memleak-fix.patch
> -reiser4-init-max_atom_flusers.patch
> -reiser4-parse-options-reduce-stack-usage.patch
> -reiser4-sparce64-warning-fix.patch
> -reiser4-hardirq-build-fix.patch
> -reiser4-x86_64-warning-fix.patch
> -reiser4-fix-mount-option-parsing.patch
> -reiser4-parse-option-cleanup.patch
> -reiser4-comment-fix.patch
> -reiser4-fill_super-improve-warning.patch
> -reiser4-disable-pseudo.patch
>
> I got a new reiser4 code drop. These patches disappeared.
>
> +reiser4-kmap-atomic-fixes.patch
>
> Fix kmap_atomic() usage in reiser4
>
> +resier4-export-shrink_dcache_anon.patch
>
> Missing symbol export
>
> +mpsc-driver-patch-fix.patch
>
> Fix mpsc-driver-patch.patch
>
> +fbdev-add-vram-option-to-intelfb.patch
> +fbdev-fix-for-using-16-pixel-wide-font-in-fb-console.patch
> +fbdev-support-for-bigger-than-16x32-fonts-in-softcursor.patch
> +fbdev-support-for-bigger-than-16x32-fonts-in-rivafb-cursor.patch
> +fbcon-disable-fbcon-cursor-if-vt-softcursor-is-enabled.patch
> +fbdev-allow-mode-change-even-if-edid-block-is-not-found.patch
> +fbdev-fix-cursor-in-doublescan-mode-in-atyfb.patch
> +fbdev-fix-typo-in-atyfb.patch
> +fbdev-change-the-find_mode-behavior.patch
>
> fbdev updates
>
> +blk_sync_queue-updates-update.patch
>
> update the update to the update to the MD update
>
> +readpage-vs-invalidate-fix.patch
>
> New way of handling the invalidate-vs-readpage-causes-EIO problem. This way
> works.
>
> +invalidate_inode_pages-mmap-coherency-fix.patch
>
> Bring back the O_DIRECT-vs-buffered-vs-mmapped coherency fixes. It seems to
> work OK now.
>
> +md-documentation-mdtxt-update.patch
>
> MD docs
>
> -evdev-return-einval-if-read-size-is-not-multiple-of-struct-size.patch
>
> Maintainers didn't like this.
>
>
>
> number of patches in -mm: 464
> number of changesets in external trees: 496
> number of patches in -mm only: 450
> total patches: 946
>
>
>
> All 464 patches:
>
>
>
> linus.patch
>
> 4level-core-patch.patch
> 4level core patch
>
> 4level-bogus-bug_on.patch
> 4level: remove bogus BUG_ON()
>
> 4level-fix-vmalloc-overflow.patch
> 4level: fix vmalloc overflow
>
> 4level-core-tweaks.patch
> 4level core tweaks
>
> 4level-highpte-fix.patch
> 4level highpte fix
>
> 4level-architecture-changes-for-alpha.patch
> 4level: Architecture changes for alpha
>
> 4level-architecture-changes-for-arm.patch
> 4level: Architecture changes for arm
>
> 4level-fixes-arm.patch
> 4level fixes (ARM)
>
> 4level-architecture-changes-for-cris.patch
> 4level: Architecture changes for cris
>
> 4level-convert-drm-to-4levels.patch
> 4level: convert DRM to 4levels.
>
> 4level-add-asm-generic-support-for-emulating.patch
> 4level: Add asm-generic support for emulating 2/3level tables.
>
> 4level-make-3level-fallback-more-type-safe.patch
> 4level: make 3level fallback more type safe
>
> 4level-ia64-support.patch
> 4level: ia64 support
>
> 4level-architecture-changes-for-i386.patch
> 4level: Architecture changes for i386
>
> 4level-architecture-changes-for-i386-fix.patch
> 4level build fix
>
> 4level-architecture-changes-for-m32r.patch
> 4level: Architecture changes for m32r
>
> 4level-architecture-changes-for-ppc.patch
> 4level: Architecture changes for ppc
>
> 4level-architecture-changes-for-ppc64.patch
> 4level: Architecture changes for ppc64
>
> 4level-architecture-changes-for-s390.patch
> 4level: Architecture changes for s390
>
> 4level-architecture-changes-for-sh.patch
> 4level: Architecture changes for sh
>
> 4level-architecture-changes-for-sh64.patch
> 4level: Architecture changes for sh64
>
> 4level-architecture-changes-for-sparc.patch
> 4level: Architecture changes for sparc
>
> 4level-architecture-changes-for-sparc64.patch
> 4level: Architecture changes for sparc64
>
> 4level-architecture-changes-for-x86_64.patch
> 4level: Architecture changes for x86_64
>
> compat-syscalls-naming-standardisation.patch
> compat syscalls naming standardisation
>
> compat-syscalls-naming-standardisation-fix.patch
> compat-syscalls-naming-standardisation-fix
>
> make-sysrq-f-call-oom_kill.patch
> make sysrq-F call oom_kill()
>
> remove-contention-on-profile_lock.patch
> remove contention on profile_lock
>
> bk-acpi.patch
>
> acpi-report-errors-in-fanc.patch
> ACPI: report errors in fan.c
>
> bk-agpgart.patch
>
> bk-cifs.patch
>
> bk-cpufreq.patch
>
> bk-driver-core.patch
>
> bk-drm.patch
>
> bk-ia64.patch
>
> fix-duplicate-config-for-ia64_mca_recovery.patch
> Fix duplicate config for IA64_MCA_RECOVERY
>
> bk-ide-dev.patch
>
> bk-input.patch
>
> bk-dtor-input.patch
>
> bk-netdev.patch
>
> bk-pci.patch
>
> bk-scsi.patch
>
> megaraid-22041-driver.patch
> megaraid 2.20.4.1 Driver
>
> bk-watchdog.patch
>
> mm.patch
> add -mmN to EXTRAVERSION
>
> fix-smm-failures-on-e750x-systems.patch
> fix SMM failures on E750x systems
>
> mm-keep-count-of-free-areas.patch
> mm: keep count of free areas
>
> mm-higher-order-watermarks.patch
> mm: higher order watermarks
>
> mm-higher-order-watermarks-fix.patch
> higher order watermarks fix
>
> mm-teach-kswapd-about-higher-order-areas.patch
> mm: teach kswapd about higher order areas
>
> fix-o_sync-speedup-for-generic_file_write_nolock.patch
> Fix O_SYNC speedup for generic_file_write_nolock
>
> mm-restore-atomic-buffer.patch
> mm: tune the page allocator thresholds
>
> make-tree_lock-an-rwlock.patch
> make mapping->tree_lock an rwlock
>
> must-fix.patch
> must fix lists update
> must fix list update
> mustfix update
> must-fix update
> mustfix lists
>
> arcnet-fixes.patch
> arcnet fixes
>
> netpoll-fix-null-ifa_list-pointer-dereference.patch
> netpoll: fix null ifa_list pointer dereference
>
> e1000-stop-working-after-resume.patch
> E1000 stop working after resume
>
> fix-for-8023ad-shutdown-issue.patch
> Fix for 802.3ad shutdown issue
>
> x25-when-receiving-a-call-check-listening-sockets-for-matching-call-user-data.patch
> X.25: When receiving a call, check listening sockets for matching call user data.
>
> x25-remove-unused-header-files.patch
> X.25: Remove unused header files
>
> ixgb-fix-ixgb_intr-looping-checks.patch
> ixgb: fix ixgb_intr looping checks
>
> xircom_tulip_cb-build-fix.patch
> xircom_tulip_cb.c build fix
>
> ppc32-add-setup_indirect_pci_nomap-routine.patch
> ppc32: add setup_indirect_pci_nomap() routine
>
> added-mpc8555-8541-security-block-infrastructure.patch
> ppc32: dded MPC8555/8541 security block infrastructure
>
> ppc32-fix-rheap-warning.patch
> ppc32: fix rheap warning
>
> ppc32-updated-reporting-of-cpu-rev-freq-for-e500-cpus.patch
> ppc32: updated reporting of CPU rev & freq for e500 CPUs
>
> ppc32-add-performance-counters-to-cpu_spec.patch
> ppc32: add performance counters to cpu_spec
>
> ppc32-remove-config_serial_console_baud.patch
> ppc32: remove CONFIG_SERIAL_CONSOLE_BAUD
>
> update-ppc-list-addresses-in-maintainers.patch
> Update ppc list addresses in MAINTAINERS
>
> ppc32-remove-__setup_cpu_8xx.patch
> ppc32: remove __setup_cpu_8xx
>
> ppc32-remove-zero-initializations-in-cpu_specs.patch
> ppc32: remove zero initializations in cpu_specs
>
> ppc64-iseries-combine-some-mf-code.patch
> ppc64: iSeries combine some MF code
>
> ppc64-iseries-remove-trailing-white-space.patch
> ppc64: iSeries remove trailing white space
>
> ppc64-iseries-remove-some-studly-caps.patch
> ppc64: iSeries remove some Studly Caps
>
> ppc64-iseries-more-mf-cleanup.patch
> ppc64: iSeries more MF cleanup
>
> ppc64-iseries-remove-more-studly-caps-from-mf-code.patch
> ppc64: iSeries remove more Studly Caps from MF code
>
> ppc64-iseries-last-of-the-cleanups-fo-the-mf-code.patch
> ppc64: iSeries last of the cleanups fo the MF code
>
> ppc64-bump-max_hwifs-in-ide-code.patch
> ppc64: Bump MAX_HWIFS in IDE code
>
> ppc64-fix-for-cpu-hotplug-numa.patch
> ppc64: Fix for cpu hotplug + NUMA
>
> ppc64-small-of-fixes.patch
> ppc64: Small OF fixes
>
> remove-unnecessary-inclusions-of-asm-aouth.patch
> Remove unnecessary inclusions of asm/a.out.h
>
> fix-page-size-assumption-in-fork.patch
> fix page size assumption in fork()
>
> ext3-compiler-warning-fix.patch
> EXT3 compiler warning fix
>
> termio-userspace-access-error-handling.patch
> Termio userspace access error handling
>
> make-proc-kcore-conditional-on-config_mmu.patch
> Make /proc/kcore conditional on CONFIG_MMU
>
> ide_arch_obsolete_init-fix.patch
> IDE_ARCH_OBSOLETE_INIT fix
>
> out-of-line-implementation-of-find_next_bit.patch
> out-of-line implementation of find_next_bit()
>
> gp-rel-data-support.patch
> GP-REL data support
>
> vm-routine-fixes.patch
> VM routine fixes
>
> frv-fujitsu-fr-v-cpu-arch-maintainer-record.patch
> FRV: Fujitsu FR-V CPU arch maintainer record
>
> frv-fujitsu-fr-v-arch-documentation.patch
> FRV: Fujitsu FR-V arch documentation
>
> frv-fujitsu-fr-v-cpu-arch-implementation-part-1.patch
> FRV: Fujitsu FR-V CPU arch implementation part 1
>
> frv-fujitsu-fr-v-cpu-arch-implementation-part-2.patch
> FRV: Fujitsu FR-V CPU arch implementation part 2
>
> frv-fujitsu-fr-v-cpu-arch-implementation-part-3.patch
> FRV: Fujitsu FR-V CPU arch implementation part 3
>
> frv-fujitsu-fr-v-cpu-arch-implementation-part-4.patch
> FRV: Fujitsu FR-V CPU arch implementation part 4
>
> frv-fujitsu-fr-v-cpu-arch-implementation-part-5.patch
> FRV: Fujitsu FR-V CPU arch implementation part 5
>
> frv-fujitsu-fr-v-cpu-arch-implementation-part-6.patch
> FRV: Fujitsu FR-V CPU arch implementation part 6
>
> frv-fujitsu-fr-v-cpu-arch-implementation-part-7.patch
> FRV: Fujitsu FR-V CPU arch implementation part 7
>
> frv-fujitsu-fr-v-cpu-arch-implementation-part-8.patch
> FRV: Fujitsu FR-V CPU arch implementation part 8
>
> frv-fujitsu-fr-v-cpu-arch-implementation-part-9.patch
> FRV: Fujitsu FR-V CPU arch implementation part 9
>
> frv-first-batch-of-fujitsu-fr-v-arch-include-files.patch
> FRV: First batch of Fujitsu FR-V arch include files
>
> frv-more-fujitsu-fr-v-arch-include-files.patch
> FRV: More Fujitsu FR-V arch include files
>
> frv-yet-more-fujitsu-fr-v-arch-include-files.patch
> FRV: Yet more Fujitsu FR-V arch include files
>
> frv-remaining-fujitsu-fr-v-arch-include-files.patch
> FRV: Remaining Fujitsu FR-V arch include files
>
> frv-make-calibrate_delay-optional.patch
> FRV: Make calibrate_delay() optional
>
> frv-better-mmap-support-in-uclinux.patch
> FRV: Better mmap support in uClinux
>
> frv-procfs-changes-for-nommu-changes.patch
> FRV: procfs changes for nommu changes
>
> frv-change-setup_arg_pages-to-take-stack-pointer.patch
> FRV: change setup_arg_pages() to take stack pointer
>
> frv-change-setup_arg_pages-to-take-stack-pointer-fixes.patch
> Fix usage of setup_arg_pages() in IA64, MIPS, S390 and Sparc64
>
> frv-add-fdpic-elf-binary-format-driver.patch
> FRV: Add FDPIC ELF binary format driver
>
> ppc64-reloc_hide.patch
>
> superhyway-bus-support.patch
> SuperHyway bus support
>
> add-cpu_relax-in-spin-loops-clean-up-barrier-for-269.patch
> add cpu_relax() in spin loops & clean up barrier()
>
> optimize-stack-pointer-access-reduce-register-usage.patch
> x86: optimize stack pointer access (reduce register usage)
>
> x86_64-ia32_aout-build-fix.patch
> x86_64: ia32_aout-build-fix
>
> cris-architecture-update-configuration-and-build.patch
> From: "Mikael Starvik" <[email protected]>
> Subject: [PATCH 1/10] CRIS architecture update - Configuration and Build
>
> cris-architecture-update-update-simple-drivers.patch
> From: "Mikael Starvik" <[email protected]>
> Subject: [PATCH 2/10] CRIS architecture update - Update simple drivers
>
> cris-architecture-update-ethernet-driver.patch
> From: "Mikael Starvik" <[email protected]>
> Subject: [PATCH 3/10] CRIS architecture update - Ethernet driver
>
> cris-architecture-update-ide-driver.patch
> From: "Mikael Starvik" <[email protected]>
> Subject: [PATCH 4/10] CRIS architecture update - IDE driver
>
> cris-architecture-update-add-usb-host-driver.patch
> From: "Mikael Starvik" <[email protected]>
> Subject: [PATCH 5/10] CRIS architecture update - Add USB host driver
>
> cris-architecture-update-core-kernel-updates.patch
> From: "Mikael Starvik" <[email protected]>
> Subject: [PATCH 6/10] CRIS architecture update - Core kernel updates.
>
> cris-architecture-update-console-setup-handling.patch
> From: "Mikael Starvik" <[email protected]>
> Subject: [PATCH 7/10] CRIS architecture update - Console setup handling.
>
> cris-architecture-update-move-drivers.patch
> From: "Mikael Starvik" <[email protected]>
> Subject: [PATCH 8/10] CRIS architecture update - Move drivers.
>
> cris-architecture-update-update-makefiles.patch
> From: "Mikael Starvik" <[email protected]>
> Subject: [PATCH 9/10] CRIS architecture update - Update Makefiles.
>
> cris-architecture-update-update-maintainers.patch
> From: "Mikael Starvik" <[email protected]>
> Subject: [PATCH 10/10] CRIS architecture update - Update MAINTAINERS.
>
> uml-use-sys_getpid-bypassing-glibc-fixes-uml-on-gentoo.patch
> uml: use sys_getpid bypassing glibc (fixes UML on Gentoo)
>
> futex_wait-fix.patch
> futex_wait hang fix
>
> enhanced-i-o-accounting-data-patch.patch
> enhanced I/O accounting data patch
>
> enhanced-memory-accounting-data-collection.patch
> enhanced Memory accounting data collection
>
> enhanced-memory-accounting-data-collection-tidy.patch
> enhanced-memory-accounting-data-collection-tidy
>
> ext3-umount-hang.patch
> ext3 umount hang
>
> wacom-tablet-driver.patch
> wacom tablet driver
>
> sparc32-fix-for-hypersparc-dma-errors.patch
> sparc32: fix for HyperSPARC DMA errors
>
> bad-naming-of-structures-and-functions-in-ext3-reservation-code.patch
> "Bad" naming of structures and functions in ext3 reservation code
>
> statfs-compat-functions-can-return-eoverflow-on-nfs.patch
> statfs compat functions can return EOVERFLOW on NFS
>
> sysfs-fix-dropping-existing-dir.patch
> sysfs: fix dropping existing dir
>
> force-feedback-support-for-uinput.patch
> Force feedback support for uinput
>
> force-feedback-support-for-uinput-cleanup.patch
> force-feedback-support-for-uinput cleanup
>
> kmap_atomic-takes-char.patch
> kmap_atomic takes char*
>
> kmap_atomic-fallout.patch
> kmap_atomic fallout
>
> drm_memory-warning-fix.patch
> drm_memory.h warning fix
>
> radix_tree_delete-fix.patch
> radix_tree_delete() fix
>
> oprofile-add-check_user_page_readable.patch
> oprofile: add check_user_page_readable()
>
> oprofile-arch-independent-code-for-stack-trace.patch
> oprofile: arch-independent code for stack trace sampling
>
> oprofile-i386-support-for-stack-trace-sampling.patch
> oprofile: i386 support for stack trace sampling
>
> oprofile-i386-support-for-stack-trace-sampling-fix.patch
> oprofile-i386-support-for-stack-trace-sampling x86_64 fix
>
> oprofile-ia64-support-for-oprofile-stack-trace.patch
> oprofile: ia64 support for oprofile stack trace sampling
>
> oprofile-update-alpha-for-api-changes.patch
> oprofile: update alpha for api changes
>
> oprofile-update-arm-for-api-changes.patch
> oprofile: update arm for api changes
>
> oprofile-update-ppc-for-api-changes.patch
> oprofile: update ppc for api changes
>
> oprofile-update-parisc-for-api-changes.patch
> oprofile: update parisc for api changes
>
> oprofile-update-s390-for-api-changes.patch
> oprofile: update s390 for api changes
>
> oprofile-update-sh-for-api-changes.patch
> oprofile: update sh for api changes
>
> oprofile-update-sparc64-for-api-changes.patch
> oprofile: update sparc64 for api changes
>
> pcmcia-17-device-model-integration.patch
> pcmcia-17: device model integration
>
> pcmcia-module_refcount-oops-fix.patch
> pcmcia: module_refcount oops fix
>
> pcmcia-18a-client_t-and-pcmcia_device-integration.patch
> pcmcia-18a: client_t and pcmcia_device integration
>
> pcmcia-18b-error-on-leftover-devices.patch
> pcmcia-18b: error on leftover devices
>
> pcmcia-19-netdevice-integration.patch
> pcmcia-19: netdevice integration
>
> kgdb-ga.patch
> kgdb stub for ia32 (George Anzinger's one)
> kgdbL warning fix
> kgdb buffer overflow fix
> kgdbL warning fix
> kgdb: CONFIG_DEBUG_INFO fix
> x86_64 fixes
> correct kgdb.txt Documentation link (against 2.6.1-rc1-mm2)
> kgdb: fix for recent gcc
> kgdb warning fixes
> THREAD_SIZE fixes for kgdb
> Fix stack overflow test for non-8k stacks
> kgdb-ga.patch fix for i386 single-step into sysenter
> fix TRAP_BAD_SYSCALL_EXITS on i386
> add TRAP_BAD_SYSCALL_EXITS config for i386
> kgdb-is-incompatible-with-kprobes
> kgdb-ga-build-fix
>
> kgdb-ga-fixes.patch
> kgdb-ga-fixes
>
> kgdboe-netpoll.patch
> kgdb-over-ethernet via netpoll
> kgdboe: fix configuration of MAC address
>
> kgdb-x86_64-support.patch
> kgdb-x86_64-support.patch for 2.6.2-rc1-mm3
> kgdb-x86_64-warning-fixes
> kgdb-x86_64-fix
> kgdb-x86_64-serial-fix
> kprobes exception notifier fix
>
> kgdb-ia64-support.patch
> IA64 kgdb support
> ia64 kgdb repair and cleanup
> ia64 kgdb fix
> kgdb: ia64 fixes
>
> fix-cpm2-uart-driver-device-number-brain-damage.patch
> Fix CPM2 uart driver device number brain damage
>
> invalidate_inodes-speedup.patch
> invalidate_inodes speedup
> more invalidate_inodes speedup fixes
>
> dev-mem-restriction-patch.patch
> /dev/mem restriction patch
>
> dev-mem-restriction-patch-allow-reads.patch
> dev-mem-restriction-patch: allow reads
>
> jbd-remove-livelock-avoidance.patch
> JBD: remove livelock avoidance code in journal_dirty_data()
>
> journal_add_journal_head-debug.patch
> journal_add_journal_head-debug
>
> list_del-debug.patch
> list_del debug check
>
> unplug-can-sleep.patch
> unplug functions can sleep
>
> firestream-warnings.patch
> firestream warnings
>
> perfctr-core.patch
> perfctr: core
>
> perfctr-i386.patch
> perfctr: i386
>
> perfctr-prescott-fix.patch
> Prescott fix for perfctr
>
> perfctr-x86_64.patch
> perfctr: x86_64
>
> perfctr-ppc.patch
> perfctr: PowerPC
>
> perfctr-ppc32-mmcr0-handling-fixes.patch
> perfctr ppc32 MMCR0 handling fixes
>
> perfctr-virtualised-counters.patch
> perfctr: virtualised counters
>
> perfctr-remap_page_range-fix.patch
>
> virtual-perfctr-illegal-sleep.patch
> virtual perfctr illegal sleep
>
> make-perfctr_virtual-default-in-kconfig-match-recommendation.patch
> Make PERFCTR_VIRTUAL default in Kconfig match recommendation in help text
>
> perfctr-ifdef-cleanup.patch
> perfctr ifdef cleanup
>
> perfctr-update-2-6-kconfig-related-updates.patch
> perfctr: Kconfig-related updates
>
> perfctr-ppc32-preliminary-interrupt-support.patch
> perfctr ppc32 preliminary interrupt support
>
> perfctr-update-5-6-reduce-stack-usage.patch
> perfctr: reduce stack usage
>
> perfctr-interrupt-support-kconfig-fix.patch
> perfctr interrupt_support Kconfig fix
>
> perfctr-low-level-documentation.patch
> perfctr low-level documentation
>
> perfctr-inheritance-1-3-driver-updates.patch
> perfctr inheritance: driver updates
>
> perfctr-inheritance-2-3-kernel-updates.patch
> perfctr inheritance: kernel updates
>
> perfctr-inheritance-3-3-documentation-updates.patch
> perfctr inheritance: documentation updates
>
> perfctr-inheritance-locking-fix.patch
> perfctr inheritance locking fix
>
> perfctr-api-changes-first-step.patch
> perfctr API changes: first step
>
> perfctr-x86-64-ia32-emulation-fix.patch
> perfctr x86-64 ia32 emulation fix
>
> perfctr-ppc32-update.patch
> perfctr ppc32 update
>
> sched-more-agressive-wake_idle.patch
> sched: more agressive wake_idle()
>
> sched-can_migrate-exception-for-idle-cpus.patch
> sched: can_migrate exception for idle cpus
>
> sched-newidle-fix.patch
> sched: newidle fix
>
> sched-active_load_balance-fixlet.patch
> sched: active_load_balance() fixlet
>
> sched-reset-cache_hot_time.patch
> sched: reset cache_hot_time
>
> schedc-whitespace-mangler.patch
> sched.c whitespace mangler
>
> sched-alter_kthread_prio.patch
> sched: alter_kthread_prio
>
> sched-adjust_timeslice_granularity.patch
> sched: adjust_timeslice_granularity
>
> sched-add_requeue_task.patch
> sched: add_requeue_task
>
> requeue_granularity.patch
> sched: requeue_granularity
>
> sched-remove_interactive_credit.patch
> sched: remove_interactive_credit
>
> sched-use-cached-current-value.patch
> sched: use cached current value
>
> dont-hide-thread_group_leader-from-grep.patch
> don't hide thread_group_leader() from grep
>
> add-do_proc_doulonglongvec_minmax-to-sysctl-functions.patch
> Add do_proc_doulonglongvec_minmax to sysctl functions
>
> add-do_proc_doulonglongvec_minmax-to-sysctl-functions-fix.patch
> add-do_proc_doulonglongvec_minmax-to-sysctl-functions-fix
>
> add-do_proc_doulonglongvec_minmax-to-sysctl-functions-fix-fix.patch
> add-do_proc_doulonglongvec_minmax-to-sysctl-functions fix 2
>
> add-sysctl-interface-to-sched_domain-parameters.patch
> Add sysctl interface to sched_domain parameters
>
> preempt-smp.patch
> improve preemption on SMP
>
> preempt-smp-_raw_read_trylock-bias-fix.patch
> preempt-smp _raw_read_trylock bias fix
>
> preempt-cleanup.patch
> preempt cleanup
>
> preempt-cleanup-fix.patch
> preempt-cleanup-fix
>
> add-lock_need_resched.patch
> add lock_need_resched()
>
> sched-add-cond_resched_softirq.patch
> sched: add cond_resched_softirq()
>
> sched-ext3-fix-scheduling-latencies-in-ext3.patch
> sched: ext3: fix scheduling latencies in ext3
>
> break-latency-in-invalidate_list.patch
> break latency in invalidate_list()
>
> sched-vfs-fix-scheduling-latencies-in-prune_dcache-and-select_parent.patch
> sched: vfs: fix scheduling latencies in prune_dcache() and select_parent()
>
> sched-vfs-fix-scheduling-latencies-in-prune_dcache-and-select_parent-fix.patch
> sched-vfs-fix-scheduling-latencies-in-prune_dcache-and-select_parent fix
>
> sched-net-fix-scheduling-latencies-in-netstat.patch
> sched: net: fix scheduling latencies in netstat
>
> sched-net-fix-scheduling-latencies-in-__release_sock.patch
> sched: net: fix scheduling latencies in __release_sock
>
> sched-mm-fix-scheduling-latencies-in-unmap_vmas.patch
> sched: mm: fix scheduling latencies in unmap_vmas()
>
> sched-mm-fix-scheduling-latencies-in-get_user_pages.patch
> sched: mm: fix scheduling latencies in get_user_pages()
>
> sched-mm-fix-scheduling-latencies-in-filemap_sync.patch
> sched: mm: fix scheduling latencies in filemap_sync()
>
> fix-keventd-execution-dependency.patch
> fix keventd execution dependency
>
> sched-fix-scheduling-latencies-in-mttrc.patch
> sched: fix scheduling latencies in mttr.c
>
> sched-fix-scheduling-latencies-in-vgaconc.patch
> sched: fix scheduling latencies in vgacon.c
>
> sched-fix-scheduling-latencies-for-preempt-kernels.patch
> sched: fix scheduling latencies for !PREEMPT kernels
>
> idle-thread-preemption-fix.patch
> idle thread preemption fix
>
> oprofile-smp_processor_id-fixes.patch
> oprofile smp_processor_id() fixes
>
> fix-smp_processor_id-warning-in-numa_node_id.patch
> Fix smp_processor_id() warning in numa_node_id()
>
> remove-the-bkl-by-turning-it-into-a-semaphore.patch
> remove the BKL by turning it into a semaphore
>
> cpu_down-warning-fix.patch
> cpu_down() warning fix
>
> vmtrunc-truncate_count-not-atomic.patch
> vmtrunc: truncate_count not atomic
>
> vmtrunc-restore-unmap_vmas-zap_bytes.patch
> vmtrunc: restore unmap_vmas zap_bytes
>
> vmtrunc-unmap_mapping_range_tree.patch
> vmtrunc: unmap_mapping_range_tree
>
> vmtrunc-unmap_mapping-dropping-i_mmap_lock.patch
> vmtrunc: unmap_mapping dropping i_mmap_lock
>
> vmtrunc-vm_truncate_count-race-caution.patch
> vmtrunc: vm_truncate_count race caution
>
> vmtrunc-bug-if-page_mapped.patch
> vmtrunc: bug if page_mapped
>
> vmtrunc-restart_addr-in-truncate_count.patch
> vmtrunc: restart_addr in truncate_count
>
> v4l-yet-another-video-buf-interface-update.patch
> v4l: yet another video-buf interface update
>
> v4l-add-video-buf-dvbc.patch
> v4l: add video-buf-dvb.c
>
> v4l-bttv-update.patch
> v4l: bttv update
>
> v4l-bttv-update-fix.patch
> bttv static build fix
>
> v4l-bttv-update-fix2.patch
> remove stale bttv_parse prototype
>
> v4l-saa7134-update.patch
> v4l: saa7134 update
>
> v4l-cx88-update.patch
> v4l: cx88 update
>
> v4l-saa7146-update.patch
> v4l: saa7146 update
>
> v4l-tuner-modparam.patch
> v4l: tuner modparam
>
> v4l-ir-common-modparam.patch
> v4l: ir-common modparam
>
> v4l-v4l1-compat-modparam.patch
> v4l: v4l1-compat modparam
>
> v4l-msp3400-fix.patch
> v4l: msp3400 fix
>
> media-video-bw-qcamc-remove-an-unused-function.patch
> media/video/bw-qcam.c: remove an unused function
>
> linux-2.6.8.1-49-rpc_workqueue.patch
> nfs: RPC: Convert rpciod into a work queue for greater flexibility
>
> linux-2.6.8.1-50-rpc_queue_lock.patch
> nfs: RPC: Remove the rpc_queue_lock global spinlock
>
> allow-modular-ide-pnp.patch
> allow modular ide-pnp
>
> allow-x86_64-to-reenable-interrupts-on-contention.patch
> Allow x86_64 to reenable interrupts on contention
>
> i386-cpu-hotplug-updated-for-mm.patch
> i386 CPU hotplug updated for -mm
>
> serialize-access-to-ide-devices.patch
> serialize access to ide devices
>
> disable-atykb-warning.patch
> disable atykb "too many keys pressed" warning
>
> export-file_ra_state_init-again.patch
> Export file_ra_state_init() again
>
> cachefs-filesystem.patch
> CacheFS filesystem
>
> cachefs-release-search-records-lest-they-return-to-haunt-us.patch
> CacheFS: release search records lest they return to haunt us
>
> fix-64-bit-problems-in-cachefs.patch
> Fix 64-bit problems in cachefs
>
> cachefs-fixed-typos-that-cause-wrong-pointer-to-be-kunmapped.patch
> cachefs: fixed typos that cause wrong pointer to be kunmapped
>
> cachefs-return-the-right-error-upon-invalid-mount.patch
> CacheFS: return the right error upon invalid mount
>
> fix-cachefs-barrier-handling-and-other-kernel-discrepancies.patch
> Fix CacheFS barrier handling and other kernel discrepancies
>
> remove-error-from-linux-cachefsh.patch
> Remove #error from linux/cachefs.h
>
> cachefs-warning-fix-2.patch
> cachefs warning fix 2
>
> cachefs-linkage-fix-2.patch
> cachefs linkage fix
>
> cachefs-build-fix.patch
> cachefs build fix
>
> cachefs-documentation.patch
> CacheFS documentation
>
> add-page-becoming-writable-notification.patch
> Add page becoming writable notification
>
> provide-a-filesystem-specific-syncable-page-bit.patch
> Provide a filesystem-specific sync'able page bit
>
> provide-a-filesystem-specific-syncable-page-bit-fix.patch
> provide-a-filesystem-specific-syncable-page-bit-fix
>
> provide-a-filesystem-specific-syncable-page-bit-fix-2.patch
> provide-a-filesystem-specific-syncable-page-bit-fix-2
>
> make-afs-use-cachefs.patch
> Make AFS use CacheFS
>
> afs-cachefs-dependency-fix.patch
> afs-cachefs-dependency-fix
>
> split-general-cache-manager-from-cachefs.patch
> Split general cache manager from CacheFS
>
> turn-cachefs-into-a-cache-backend.patch
> Turn CacheFS into a cache backend
>
> rework-the-cachefs-documentation-to-reflect-fs-cache-split.patch
> Rework the CacheFS documentation to reflect FS-Cache split
>
> update-afs-client-to-reflect-cachefs-split.patch
> Update AFS client to reflect CacheFS split
>
> assign_irq_vector-section-fix.patch
> assign_irq_vector __init section fix
>
> kexec-i8259-shutdowni386.patch
> kexec: i8259-shutdown.i386
>
> kexec-i8259-shutdown-x86_64.patch
> kexec: x86_64 i8259 shutdown
>
> kexec-apic-virtwire-on-shutdowni386patch.patch
> kexec: apic-virtwire-on-shutdown.i386.patch
>
> kexec-apic-virtwire-on-shutdownx86_64.patch
> kexec: apic-virtwire-on-shutdown.x86_64
>
> kexec-ioapic-virtwire-on-shutdowni386.patch
> kexec: ioapic-virtwire-on-shutdown.i386
>
> kexec-ioapic-virtwire-on-shutdownx86_64.patch
> kexec: ioapic-virtwire-on-shutdown.x86_64
>
> kexec-e820-64bit.patch
> kexec: e820-64bit
>
> kexec-kexec-generic.patch
> kexec: kexec-generic
>
> kexec-ide-spindown-fix.patch
> kexec-ide-spindown-fix
>
> kexec-ifdef-cleanup.patch
> kexec ifdef cleanup
>
> kexec-machine_shutdownx86_64.patch
> kexec: machine_shutdown.x86_64
>
> kexec-kexecx86_64.patch
> kexec: kexec.x86_64
>
> kexec-kexecx86_64-4level-fix.patch
> kexec-kexecx86_64-4level-fix
>
> kexec-machine_shutdowni386.patch
> kexec: machine_shutdown.i386
>
> kexec-kexeci386.patch
> kexec: kexec.i386
>
> kexec-use_mm.patch
> kexec: use_mm
>
> kexec-loading-kernel-from-non-default-offset.patch
> kexec: loading kernel from non-default offset
>
> kexec-loading-kernel-from-non-default-offset-fix.patch
> kdump: fix bss compile error
>
> kexec-enabling-co-existence-of-normal-kexec-kernel-and-panic-kernel.patch
> kexec: nabling co-existence of normal kexec kernel and panic kernel
>
> crashdump-documentation.patch
> crashdump: documentation
>
> crashdump-memory-preserving-reboot-using-kexec.patch
> crashdump: memory preserving reboot using kexec
>
> crashdump-routines-for-copying-dump-pages.patch
> crashdump: routines for copying dump pages
>
> crashdump-routines-for-copying-dump-pages-kmap-fiddle.patch
> crashdump-routines-for-copying-dump-pages-kmap-fiddle
>
> crashdump-kmap-build-fix.patch
> crashdump kmap build fix
>
> crashdump-register-snapshotting-before-kexec-boot.patch
> crashdump: register snapshotting before kexec boot
>
> crashdump-elf-format-dump-file-access.patch
> crashdump: ELF format dump file access
>
> crashdump-linear-raw-format-dump-file-access.patch
> crashdump: linear/raw format dump file access
>
> crashdump-minor-bug-fixes-to-kexec-crashdump-code.patch
> crashdump: minor bug fixes to kexec crashdump code
>
> crashdump-cleanups-to-the-kexec-based-crashdump-code.patch
> crashdump: cleanups to the kexec based crashdump code
>
> new-bitmap-list-format-for-cpusets.patch
> new bitmap list format (for cpusets)
>
> cpusets-big-numa-cpu-and-memory-placement.patch
> cpusets - big numa cpu and memory placement
>
> cpusets-fix-cpuset_get_dentry.patch
> cpusets : fix cpuset_get_dentry()
>
> cpusets-fix-race-in-cpuset_add_file.patch
> cpusets: fix race in cpuset_add_file()
>
> cpusets-remove-more-casts.patch
> cpusets: remove more casts
>
> cpusets-make-config_cpusets-the-default-in-sn2_defconfig.patch
> cpusets: make CONFIG_CPUSETS the default in sn2_defconfig
>
> cpusets-document-proc-status-allowed-fields.patch
> cpusets: document proc status allowed fields
>
> cpusets-dont-export-proc_cpuset_operations.patch
> Cpusets - Dont export proc_cpuset_operations
>
> cpusets-display-allowed-masks-in-proc-status.patch
> cpusets: display allowed masks in proc status
>
> cpusets-simplify-cpus_allowed-setting-in-attach.patch
> cpusets: simplify cpus_allowed setting in attach
>
> cpusets-remove-useless-validation-check.patch
> cpusets: remove useless validation check
>
> cpusets-config_cpusets-depends-on-smp.patch
> Cpusets: CONFIG_CPUSETS depends on SMP
>
> cpusets-tasks-file-simplify-format-fixes.patch
> Cpusets tasks file: simplify format, fixes
>
> cpusets-simplify-memory-generation.patch
> Cpusets: simplify memory generation
>
> cpusets-interoperate-with-hotplug-online-maps.patch
> cpusets: interoperate with hotplug online maps
>
> cpusets-alternative-fix-for-possible-race-in.patch
> cpusets: alternative fix for possible race in cpuset_tasks_read()
>
> cpusets-remove-casts.patch
> cpusets: remove void* typecasts
>
> reiser4-sb_sync_inodes.patch
> reiser4: vfs: add super_operations.sync_inodes()
>
> reiser4-allow-drop_inode-implementation.patch
> reiser4: export vfs inode.c symbols
>
> reiser4-truncate_inode_pages_range.patch
> reiser4: vfs: add truncate_inode_pages_range()
>
> reiser4-export-remove_from_page_cache.patch
> reiser4: export pagecache add/remove functions to modules
>
> reiser4-export-page_cache_readahead.patch
> reiser4: export page_cache_readahead to modules
>
> reiser4-reget-page-mapping.patch
> reiser4: vfs: re-check page->mapping after calling try_to_release_page()
>
> reiser4-rcu-barrier.patch
> reiser4: add rcu_barrier() synchronization point
>
> reiser4-export-inode_lock.patch
> reiser4: export inode_lock to modules
>
> reiser4-export-pagevec-funcs.patch
> reiser4: export pagevec functions to modules
>
> reiser4-export-radix_tree_preload.patch
> reiser4: export radix_tree_preload() to modules
>
> reiser4-radix-tree-tag.patch
> reiser4: add new radix tree tag
>
> reiser4-radix_tree_lookup_slot.patch
> reiser4: add radix_tree_lookup_slot()
>
> reiser4-aliased-dir.patch
> reiser4: vfs: handle aliased directories
>
> reiser4-kobject-umount-race.patch
> reiser4: introduce filesystem kobjects
>
> reiser4-kobject-umount-race-cleanup.patch
> reiser4-kobject-umount-race-cleanup
>
> reiser4-perthread-pages.patch
> reiser4: per-thread page pools
>
> reiser4-unstatic-kswapd.patch
> reiser4: make kswapd() unstatic for debug
>
> reiser4-include-reiser4.patch
> reiser4: add to build system
>
> reiser4-doc.patch
> reiser4: documentation
>
> reiser4-only.patch
> reiser4: main fs
>
> reiser4-kmap-atomic-fixes.patch
> reiser4 kmap_atomic fixes
>
> resier4-export-shrink_dcache_anon.patch
> resier4: export shrink_dcache_anon
>
> reiser4-disable-repacker.patch
> reiser4 disable-repacker.patch
>
> add-acpi-based-floppy-controller-enumeration.patch
> Add ACPI-based floppy controller enumeration.
>
> add-acpi-based-floppy-controller-enumeration-fix.patch
> add-acpi-based-floppy-controller-enumeration fix
>
> update-acpi-floppy-enumeration.patch
> update ACPI floppy enumeration
>
> floppy-acpi-enumeration-update.patch
> floppy ACPI enumeration update
>
> possible-dcache-bug-debugging-patch.patch
> Possible dcache BUG: debugging patch
>
> 3c59x-pm-fix.patch
> 3c59x: enable power management unconditionally
>
> 3c59x-missing-pci_disable_device.patch
> 3c59x: missing pci_disable_device
>
> 3c59x-use-netdev_priv.patch
> 3c59x: use netdev_priv
>
> 3c59x-make-use-of-generic_mii_ioctl.patch
> 3c59x: Make use of generic_mii_ioctl
>
> 3c59x-vortex-select-mii.patch
> 3c59x: VORTEX select MII
>
> 3c59x-reload-eeprom-values-at-rmmod-for-needy-cards.patch
> 3c59x: reload EEPROM values at rmmod for needy cards
>
> 3c59x-remove-eeprom_reset-for-3c905b.patch
> 3c59x: remove EEPROM_RESET for 3c905B
>
> 3c59x-support-more-ethtool_ops.patch
> 3c59x: support more ethtool_ops
>
> serial-add-support-for-non-standard-xtals-to-16c950-driver.patch
> serial: add support for non-standard XTALs to 16c950 driver
>
> add-support-for-possio-gcc-aka-pcmcia-siemens-mc45.patch
> Add support for Possio GCC AKA PCMCIA Siemens MC45
>
> serial-8250-receive-lockup-fix.patch
> serial: 8250 receive lockup fix
>
> new-serial-flow-control.patch
> new serial flow control
>
> early-uart-console-support.patch
> early uart console support
>
> mpsc-driver-patch.patch
> serial: MPSC driver
>
> mpsc-driver-patch-fix.patch
> serial: add PORT_MPSC to <linux/serial_core.h>
>
> vm-pageout-throttling.patch
> vm: pageout throttling
>
> revert-allow-oem-written-modules-to-make-calls-to-ia64-oem-sal-functions.patch
> revert "allow OEM written modules to make calls to ia64 OEM SAL functions"
>
> md-add-interface-for-userspace-monitoring-of-events.patch
> md: add interface for userspace monitoring of events.
>
> fix-for-spurious-interrupts-on-e100-resume-2.patch
> Fix for spurious interrupts on e100 resume 2
>
> thinkpad-fnfx-key-driver.patch
> thinkpad fn+fx key driver
>
> make-acpi_bus_register_driver-consistent-with-pci_register_driver-again.patch
> make acpi_bus_register_driver() consistent with pci_register_driver()
>
> make-acpi_bus_register_driver-consistent-with-pci_register_driver-again-warning-fix.patch
> make-acpi_bus_register_driver-consistent-with-pci_register_driver-again-warning-fix
>
> enforce-a-gap-between-heap-and-stack.patch
> Enforce a gap between heap and stack
>
> remove-lock_section-from-x86_64-spin_lock-asm.patch
> remove LOCK_SECTION from x86_64 spin_lock asm
>
> kfree_skb-dump_stack.patch
> kfree_skb-dump_stack
>
> for-mm-only-remove-remap_page_range-completely.patch
> vm: for -mm only: remove remap_page_range() completely
>
> cancel_rearming_delayed_work.patch
> cancel_rearming_delayed_work()
>
> make-cancel_rearming_delayed_workqueue-static.patch
> make cancel_rearming_delayed_workqueue static
>
> ipvs-deadlock-fix.patch
> ipvs deadlock fix
>
> minimal-ide-disk-updates.patch
> Minimal ide-disk updates
>
> no-buddy-bitmap-patch-revist-intro-and-includes.patch
> no buddy bitmap patch revist: intro and includes
>
> no-buddy-bitmap-patch-revisit-for-mm-page_allocc.patch
> no buddy bitmap patch revisit: for mm/page_alloc.c
>
> no-buddy-bitmap-patch-revisit-for-mm-page_allocc-fix.patch
> no-buddy-bitmap-patch-revisit-for-mm-page_allocc fix
>
> no-buddy-bitmap-patch-revist-for-ia64.patch
> no buddy bitmap patch revist: for ia64
>
> no-buddy-bitmap-patch-revist-for-ia64-fix.patch
> no-buddy-bitmap-patch-revist-for-ia64 fix
>
> use-find_trylock_page-in-free_swap_and_cache-instead-of-hand-coding.patch
> use find_trylock_page in free_swap_and_cache instead of hand coding
>
> dio-handle-eof.patch
> direct-IO: handle EOF
> dio-handle-eof fix
>
> o_direct-fix-again.patch
> O_DIRECT fix again
>
> fbdev-fix-io-access-in-rivafb-part-2.patch
> fbdev: Fix IO access in rivafb (part 2)
>
> fbdev-fix-mode-handling-in-rivafb-if-with-no-edid.patch
> fbdev: Fix mode handling in rivafb if with no EDID
>
> fbdev-use-soft_cursor-in-i810fb.patch
> fbdev: Use soft_cursor in i810fb
>
> fbdev-set-color-depth-to-8-if-in-pseudocolor-in-vesafb.patch
> fbdev: Set color depth to 8 if in pseudocolor in vesafb.
>
> fbcon-split-set_con2fb_map.patch
> fbcon: Split set_con2fb_map()
>
> fbdev-introduce-fb_blank_-constants.patch
> fbdev: Introduce FB_BLANK_* constants
>
> fbdev-convert-drivers-to-use-the-new-fb_blank_-constants.patch
> fbdev: Convert drivers to use the new FB_BLANK_* constants
>
> fbdev-fix-broken-fb_blank-implementation.patch
> fbdev: Fix broken fb_blank() implementation.
>
> fbdev-add-vram-option-to-intelfb.patch
> fbdev: Add vram option to intelfb
>
> fbdev-fix-for-using-16-pixel-wide-font-in-fb-console.patch
> fbdev: Fix for using >16 pixel wide font in fb console
>
> fbdev-support-for-bigger-than-16x32-fonts-in-softcursor.patch
> fbdev: Support for bigger than 16x32 fonts in softcursor
>
> fbdev-support-for-bigger-than-16x32-fonts-in-rivafb-cursor.patch
> fbdev: Support for bigger than 16x32 fonts in rivafb cursor
>
> fbcon-disable-fbcon-cursor-if-vt-softcursor-is-enabled.patch
> fbcon: Disable fbcon cursor if vt softcursor is enabled
>
> fbdev-allow-mode-change-even-if-edid-block-is-not-found.patch
> fbdev: Allow mode change even if EDID block is not found
>
> fbdev-fix-cursor-in-doublescan-mode-in-atyfb.patch
> fbdev: Fix cursor in doublescan mode in atyfb
>
> fbdev-fix-typo-in-atyfb.patch
> fbdev: Fix typo in atyfb
>
> fbdev-change-the-find_mode-behavior.patch
> fbdev: Change the find_mode behavior
>
> md-fix-problem-with-md-linear-for-devices-larger-than-2-terabytes.patch
> md: fix problem with md/linear for devices larger than 2 terabytes
>
> md-fix-raid6-problem.patch
> md: fix raid6 problem
>
> md-delete-unplug-timer-before-shutting-down-md-array.patch
> md: delete unplug timer before shutting down md array
>
> md-delete-unplug-timer-before-shutting-down-md-array-cleanup.patch
> md-delete-unplug-timer-before-shutting-down-md-array-cleanup
>
> blk_sync_queue-updates.patch
> blk_sync_queue() updates
>
> blk_sync_queue-updates-update.patch
> blk_sync_queue-updates update
>
> md-faulty-personality.patch
> md: "Faulty" personality
>
> figure-out-who-is-inserting-bogus-modules.patch
> Figure out who is inserting bogus modules
>
> use-mmiowb-in-qla1280c.patch
> use mmiowb in qla1280.c
>
> readpage-vs-invalidate-fix.patch
> readpage-vs-invalidate fix
>
> invalidate_inode_pages-mmap-coherency-fix.patch
> invalidate_inode_pages2() mmap coherency fix
>
> yenta_socketc-fix-missing-pci_disable_dev.patch
> yenta_socket.c: Fix missing pci_disable_dev
>
> yenta-dont-enable-read-prefetch-on-older-o2-bridges.patch
> yenta: don't enable read prefetch on older o2 bridges.
>
> cputime-introduce-cputime.patch
> cputime: introduce cputime
>
> cputime-introduce-cputime-fix.patch
> cputime-introduce-cputime fix
>
> cputime-fix-do_setitimer.patch
> cputime: fix do_setitimer.
>
> cputime-missing-pieces.patch
> cputime: missing pieces.
>
> detect-atomic-counter-underflows.patch
> detect atomic counter underflows
>
> lock-initializer-unifying-batch-2-alpha.patch
> Lock initializer unifying: ALPHA
>
> lock-initializer-unifying-batch-2-ia64.patch
> Lock initializer unifying: IA64
>
> lock-initializer-unifying-batch-2-m32r.patch
> Lock initializer unifying: M32R
>
> lock-initializer-unifying-batch-2-mips.patch
> Lock initializer unifying: MIPS
>
> lock-initializer-unifying-batch-2-misc-drivers.patch
> Lock initializer unifying: Misc drivers
>
> lock-initializer-unifying-batch-2-block-devices.patch
> Lock initializer unifying: Block devices
>
> lock-initializer-unifying-batch-2-drm.patch
> Lock initializer unifying: DRM
>
> lock-initializer-unifying-batch-2-character-devices.patch
> Lock initializer unifying: character devices
>
> lock-initializer-unifying-batch-2-rio.patch
> Lock initializer unifying: RIO
>
> lock-initializer-unifying-batch-2-firewire.patch
> Lock initializer unifying: Firewire
>
> lock-initializer-unifying-batch-2-isdn.patch
> Lock initializer unifying: ISDN
>
> lock-initializer-unifying-batch-2-raid.patch
> Lock initializer unifying: Raid
>
> lock-initializer-unifying-batch-2-media-drivers.patch
> Lock initializer unifying: media drivers
>
> lock-initializer-unifying-batch-2-scsi.patch
> Lock initializer unifying: SCSI
>
> lock-initializer-unifying-batch-2-drivers-serial.patch
> Lock initializer unifying: drivers/serial
>
> lock-initializer-unifying-batch-2-filesystems.patch
> Lock initializer unifying: Filesystems
>
> lock-initializer-unifying-batch-2-video.patch
> Lock initializer unifying: Video
>
> lock-initializer-unifying-batch-2-sound.patch
> Lock initializer unifying: sound
>
> remove-duplicate-safe_for_readread_buffer-entry-in-scsi_ioctlc.patch
> Remove duplicate safe_for_read(READ_BUFFER) entry in scsi_ioctl.c
>
> md-documentation-mdtxt-update.patch
> md: Documentation/md.txt update
>
> convert-module_parm-to-module_param-family.patch
> convert MODULE_PARM() to module_param() family
>
> more-module_parm-conversions.patch
> more MODULE_PARM conversions
>
> kill-lockd_symsc.patch
> kill lockd_syms.c
>
> aic-warning-fix.patch
> aic warning fix
>
> lib-parser-fix-%%-parsing.patch
> lib/parser: fix %% parsing
>
> make-cdev_get-static-unexport.patch
> make cdev_get static, unexport
>
> unexport-task_nice.patch
> unexport task_nice
>
> limit-CONFIG_LEGACY_PTY_COUNT.patch
> limit CONFIG_LEGACY_PTY_COUNT
>
>
>
> -
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to [email protected]
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
Magnus Damm <[email protected]> wrote:
>
> It looks like the file "usr/initramfs_list" gets removed when applying
> the broken out patches (by "linux.patch") but the file is not removed
> when the combined patch is applied...
Can't do anything about that. The file exists in -rc1, is removed by
linus.patch and is created at build time when you build the post-rc1
kernel.
In other words: you have to remove that file prior to unpatching.
The problem will go away once -rc2-mm1 comes out.
On Thu, 2004-11-11 at 11:11, Andrew Morton wrote:
> Magnus Damm <[email protected]> wrote:
> >
> > It looks like the file "usr/initramfs_list" gets removed when applying
> > the broken out patches (by "linux.patch") but the file is not removed
> > when the combined patch is applied...
>
> Can't do anything about that. The file exists in -rc1, is removed by
> linus.patch and is created at build time when you build the post-rc1
> kernel.
>
> In other words: you have to remove that file prior to unpatching.
I was comparing two source trees; one source tree with the combined
patch and one source tree with the series. But if everyone is aware that
they differ a wee bit and that is ok then I am happy.
> The problem will go away once -rc2-mm1 comes out.
Yes. Thank you.
/ magnus
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.10-rc1-mm5
# Thu Nov 11 11:48:02 2004
#
CONFIG_X86=y
CONFIG_MMU=y
CONFIG_UID16=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
# CONFIG_CLEAN_COMPILE is not set
CONFIG_BROKEN=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_LOCK_KERNEL=y
#
# General setup
#
CONFIG_LOCALVERSION="=LoulousMobile"
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
# CONFIG_POSIX_MQUEUE is not set
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_HOTPLUG=y
CONFIG_KOBJECT_UEVENT=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_FUTEX=y
CONFIG_EPOLL=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SHMEM=y
CONFIG_CC_ALIGN_FUNCTIONS=0
CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
# CONFIG_TINY_SHMEM is not set
#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_OBSOLETE_MODPARM=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y
#
# Processor type and features
#
CONFIG_X86_PC=y
# CONFIG_X86_ELAN is not set
# CONFIG_X86_VOYAGER is not set
# CONFIG_X86_NUMAQ is not set
# CONFIG_X86_SUMMIT is not set
# CONFIG_X86_BIGSMP is not set
# CONFIG_X86_VISWS is not set
# CONFIG_X86_GENERICARCH is not set
# CONFIG_X86_ES7000 is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
CONFIG_MPENTIUMIII=y
# CONFIG_MPENTIUMM is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP2 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_X86_GENERIC is not set
CONFIG_X86_CMPXCHG=y
CONFIG_X86_XADD=y
CONFIG_X86_L1_CACHE_SHIFT=5
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_X86_GOOD_APIC=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_HPET_TIMER=y
# CONFIG_SMP is not set
CONFIG_PREEMPT=y
CONFIG_PREEMPT_BKL=y
CONFIG_X86_UP_APIC=y
CONFIG_X86_UP_IOAPIC=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_TSC=y
CONFIG_X86_MCE=y
CONFIG_X86_MCE_NONFATAL=y
# CONFIG_X86_MCE_P4THERMAL is not set
# CONFIG_TOSHIBA is not set
# CONFIG_I8K is not set
# CONFIG_MICROCODE is not set
# CONFIG_X86_MSR is not set
# CONFIG_X86_CPUID is not set
#
# Firmware Drivers
#
# CONFIG_EDD is not set
CONFIG_NOHIGHMEM=y
# CONFIG_HIGHMEM4G is not set
# CONFIG_HIGHMEM64G is not set
# CONFIG_MATH_EMULATION is not set
CONFIG_MTRR=y
# CONFIG_EFI is not set
CONFIG_HAVE_DEC_LOCK=y
# CONFIG_REGPARM is not set
#
# Performance-monitoring counters support
#
# CONFIG_PERFCTR is not set
CONFIG_KERN_PHYS_OFFSET=1
CONFIG_KEXEC=y
# CONFIG_CRASH_DUMP is not set
#
# Power management options (ACPI, APM)
#
CONFIG_PM=y
CONFIG_PM_DEBUG=y
CONFIG_SOFTWARE_SUSPEND=y
CONFIG_PM_STD_PARTITION="/dev/hda4"
#
# ACPI (Advanced Configuration and Power Interface) Support
#
CONFIG_ACPI=y
CONFIG_ACPI_BOOT=y
CONFIG_ACPI_INTERPRETER=y
CONFIG_ACPI_SLEEP=y
CONFIG_ACPI_SLEEP_PROC_FS=y
CONFIG_ACPI_AC=y
CONFIG_ACPI_BATTERY=y
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_VIDEO=y
CONFIG_ACPI_FAN=y
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_THERMAL=y
# CONFIG_ACPI_ASUS is not set
# CONFIG_ACPI_THINKPAD is not set
# CONFIG_ACPI_IBM is not set
# CONFIG_ACPI_TOSHIBA is not set
# CONFIG_ACPI_CUSTOM_DSDT is not set
CONFIG_ACPI_BLACKLIST_YEAR=0
CONFIG_ACPI_DEBUG=y
CONFIG_ACPI_BUS=y
CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_PCI=y
CONFIG_ACPI_SYSTEM=y
CONFIG_X86_PM_TIMER=y
# CONFIG_ACPI_CONTAINER is not set
#
# APM (Advanced Power Management) BIOS Support
#
CONFIG_APM=y
# CONFIG_APM_IGNORE_USER_SUSPEND is not set
# CONFIG_APM_DO_ENABLE is not set
# CONFIG_APM_CPU_IDLE is not set
# CONFIG_APM_DISPLAY_BLANK is not set
# CONFIG_APM_RTC_IS_GMT is not set
# CONFIG_APM_ALLOW_INTS is not set
# CONFIG_APM_REAL_MODE_POWER_OFF is not set
#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
# CONFIG_CPU_FREQ_DEBUG is not set
# CONFIG_CPU_FREQ_PROC_INTF is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=y
CONFIG_CPU_FREQ_GOV_USERSPACE=y
CONFIG_CPU_FREQ_24_API=y
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
CONFIG_CPU_FREQ_TABLE=y
#
# CPUFreq processor drivers
#
# CONFIG_X86_ACPI_CPUFREQ is not set
# CONFIG_X86_POWERNOW_K6 is not set
# CONFIG_X86_POWERNOW_K7 is not set
# CONFIG_X86_POWERNOW_K8 is not set
# CONFIG_X86_GX_SUSPMOD is not set
CONFIG_X86_SPEEDSTEP_CENTRINO=y
# CONFIG_X86_SPEEDSTEP_CENTRINO_ACPI is not set
CONFIG_X86_SPEEDSTEP_CENTRINO_TABLE=y
CONFIG_X86_SPEEDSTEP_ICH=y
# CONFIG_X86_SPEEDSTEP_SMI is not set
# CONFIG_X86_P4_CLOCKMOD is not set
# CONFIG_X86_CPUFREQ_NFORCE2 is not set
# CONFIG_X86_LONGRUN is not set
# CONFIG_X86_LONGHAUL is not set
#
# shared options
#
CONFIG_X86_SPEEDSTEP_LIB=y
# CONFIG_X86_SPEEDSTEP_RELAXED_CAP_CHECK is not set
#
# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
#
CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GOMMCONFIG is not set
# CONFIG_PCI_GODIRECT is not set
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
# CONFIG_PCI_MSI is not set
CONFIG_PCI_LEGACY_PROC=y
CONFIG_PCI_NAMES=y
CONFIG_ISA=y
# CONFIG_EISA is not set
# CONFIG_MCA is not set
# CONFIG_SCx200 is not set
#
# PCCARD (PCMCIA/CardBus) support
#
CONFIG_PCCARD=m
# CONFIG_PCMCIA_DEBUG is not set
# CONFIG_PCMCIA_OBSOLETE is not set
CONFIG_PCMCIA=m
CONFIG_CARDBUS=y
#
# PC-card bridges
#
CONFIG_YENTA=m
# CONFIG_PD6729 is not set
# CONFIG_I82092 is not set
# CONFIG_I82365 is not set
# CONFIG_TCIC is not set
CONFIG_PCMCIA_PROBE=y
#
# PCI Hotplug Support
#
CONFIG_HOTPLUG_PCI=y
CONFIG_HOTPLUG_PCI_FAKE=y
CONFIG_HOTPLUG_PCI_COMPAQ=y
CONFIG_HOTPLUG_PCI_COMPAQ_NVRAM=y
# CONFIG_HOTPLUG_PCI_IBM is not set
# CONFIG_HOTPLUG_PCI_ACPI is not set
# CONFIG_HOTPLUG_PCI_CPCI is not set
# CONFIG_HOTPLUG_PCI_PCIE is not set
# CONFIG_HOTPLUG_PCI_SHPC is not set
#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_AOUT=y
CONFIG_BINFMT_MISC=y
#
# Device Drivers
#
#
# Generic Driver Options
#
# CONFIG_STANDALONE is not set
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
CONFIG_FW_LOADER=y
# CONFIG_DEBUG_DRIVER is not set
#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set
#
# Parallel port support
#
CONFIG_PARPORT=m
CONFIG_PARPORT_PC=m
CONFIG_PARPORT_PC_CML1=m
# CONFIG_PARPORT_SERIAL is not set
# CONFIG_PARPORT_PC_FIFO is not set
# CONFIG_PARPORT_PC_SUPERIO is not set
# CONFIG_PARPORT_PC_PCMCIA is not set
# CONFIG_PARPORT_OTHER is not set
# CONFIG_PARPORT_1284 is not set
#
# Plug and Play support
#
CONFIG_PNP=y
# CONFIG_PNP_DEBUG is not set
#
# Protocols
#
# CONFIG_ISAPNP is not set
CONFIG_PNPBIOS=y
CONFIG_PNPBIOS_PROC_FS=y
CONFIG_PNPACPI=y
#
# Block devices
#
# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_DEV_XD is not set
# CONFIG_PARIDE is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
CONFIG_BLK_DEV_LOOP=m
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
# CONFIG_BLK_DEV_RAM is not set
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_LBD is not set
# CONFIG_CDROM_PKTCDVD is not set
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
#
# ATA/ATAPI/MFM/RLL support
#
CONFIG_IDE=y
CONFIG_BLK_DEV_IDE=y
#
# Please see Documentation/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_IDE_SATA is not set
# CONFIG_BLK_DEV_HD_IDE is not set
CONFIG_BLK_DEV_IDEDISK=y
CONFIG_IDEDISK_MULTI_MODE=y
# CONFIG_BLK_DEV_IDECS is not set
CONFIG_BLK_DEV_IDECD=y
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not set
# CONFIG_BLK_DEV_IDESCSI is not set
# CONFIG_IDE_TASK_IOCTL is not set
#
# IDE chipset support/bugfixes
#
CONFIG_IDE_GENERIC=y
# CONFIG_BLK_DEV_CMD640 is not set
# CONFIG_BLK_DEV_IDEPNP is not set
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_SHARE_IRQ=y
# CONFIG_BLK_DEV_OFFBOARD is not set
CONFIG_BLK_DEV_GENERIC=y
# CONFIG_BLK_DEV_OPTI621 is not set
# CONFIG_BLK_DEV_RZ1000 is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
CONFIG_IDEDMA_PCI_AUTO=y
# CONFIG_IDEDMA_ONLYDISK is not set
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
# CONFIG_BLK_DEV_ATIIXP is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_TRIFLEX is not set
# CONFIG_BLK_DEV_CY82C693 is not set
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_SC1200 is not set
CONFIG_BLK_DEV_PIIX=y
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIIMAGE is not set
# CONFIG_BLK_DEV_SIS5513 is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
# CONFIG_IDE_ARM is not set
# CONFIG_IDE_CHIPSETS is not set
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_IVB is not set
CONFIG_IDEDMA_AUTO=y
# CONFIG_BLK_DEV_HD is not set
#
# SCSI device support
#
CONFIG_SCSI=y
CONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=m
# CONFIG_BLK_DEV_SR_VENDOR is not set
CONFIG_CHR_DEV_SG=m
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
#
# SCSI Transport Attributes
#
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
#
# SCSI low-level drivers
#
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_7000FASST is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AHA152X is not set
# CONFIG_SCSI_AHA1542 is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_IN2000 is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_SCSI_SATA is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_CPQFCTS is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_DTC3280 is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_EATA_PIO is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_GENERIC_NCR5380 is not set
# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_PPA is not set
# CONFIG_SCSI_IMM is not set
# CONFIG_SCSI_NCR53C406A is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_PAS16 is not set
# CONFIG_SCSI_PCI2000 is not set
# CONFIG_SCSI_PCI2220I is not set
# CONFIG_SCSI_PSI240I is not set
# CONFIG_SCSI_QLOGIC_FAS is not set
# CONFIG_SCSI_QLOGIC_ISP is not set
# CONFIG_SCSI_QLOGIC_FC is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_QLOGIC_1280_1040 is not set
CONFIG_SCSI_QLA2XXX=y
# CONFIG_SCSI_QLA21XX is not set
# CONFIG_SCSI_QLA22XX is not set
# CONFIG_SCSI_QLA2300 is not set
# CONFIG_SCSI_QLA2322 is not set
# CONFIG_SCSI_QLA6312 is not set
# CONFIG_SCSI_QLA6322 is not set
# CONFIG_SCSI_SEAGATE is not set
# CONFIG_SCSI_SYM53C416 is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_T128 is not set
# CONFIG_SCSI_U14_34F is not set
# CONFIG_SCSI_ULTRASTOR is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
#
# PCMCIA SCSI adapter support
#
# CONFIG_PCMCIA_AHA152X is not set
# CONFIG_PCMCIA_FDOMAIN is not set
# CONFIG_PCMCIA_NINJA_SCSI is not set
# CONFIG_PCMCIA_QLOGIC is not set
# CONFIG_PCMCIA_SYM53C500 is not set
#
# Old CD-ROM drivers (not SCSI, not IDE)
#
# CONFIG_CD_NO_IDESCSI is not set
#
# Multi-device support (RAID and LVM)
#
CONFIG_MD=y
# CONFIG_BLK_DEV_MD is not set
CONFIG_BLK_DEV_DM=m
# CONFIG_DM_CRYPT is not set
# CONFIG_DM_SNAPSHOT is not set
# CONFIG_DM_MIRROR is not set
# CONFIG_DM_ZERO is not set
#
# Fusion MPT device support
#
# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
#
# CONFIG_IEEE1394 is not set
#
# I2O device support
#
# CONFIG_I2O is not set
#
# Networking support
#
CONFIG_NET=y
#
# Networking options
#
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
# CONFIG_NETLINK_DEV is not set
CONFIG_UNIX=y
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
# CONFIG_IP_MULTIPLE_TABLES is not set
# CONFIG_IP_ROUTE_MULTIPATH is not set
# CONFIG_IP_ROUTE_VERBOSE is not set
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_IP_MROUTE is not set
# CONFIG_ARPD is not set
# CONFIG_SYN_COOKIES is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_TUNNEL is not set
CONFIG_IP_TCPDIAG=y
# CONFIG_IP_TCPDIAG_IPV6 is not set
#
# IP: Virtual Server Configuration
#
# CONFIG_IP_VS is not set
# CONFIG_IPV6 is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
#
# IP: Netfilter Configuration
#
CONFIG_IP_NF_CONNTRACK=m
# CONFIG_IP_NF_CT_ACCT is not set
# CONFIG_IP_NF_CONNTRACK_MARK is not set
# CONFIG_IP_NF_CT_PROTO_SCTP is not set
# CONFIG_IP_NF_FTP is not set
# CONFIG_IP_NF_IRC is not set
# CONFIG_IP_NF_TFTP is not set
# CONFIG_IP_NF_AMANDA is not set
# CONFIG_IP_NF_QUEUE is not set
CONFIG_IP_NF_IPTABLES=m
# CONFIG_IP_NF_MATCH_LIMIT is not set
# CONFIG_IP_NF_MATCH_IPRANGE is not set
# CONFIG_IP_NF_MATCH_MAC is not set
# CONFIG_IP_NF_MATCH_PKTTYPE is not set
# CONFIG_IP_NF_MATCH_MARK is not set
# CONFIG_IP_NF_MATCH_MULTIPORT is not set
# CONFIG_IP_NF_MATCH_TOS is not set
# CONFIG_IP_NF_MATCH_RECENT is not set
# CONFIG_IP_NF_MATCH_ECN is not set
# CONFIG_IP_NF_MATCH_DSCP is not set
# CONFIG_IP_NF_MATCH_AH_ESP is not set
# CONFIG_IP_NF_MATCH_LENGTH is not set
# CONFIG_IP_NF_MATCH_TTL is not set
# CONFIG_IP_NF_MATCH_TCPMSS is not set
# CONFIG_IP_NF_MATCH_HELPER is not set
CONFIG_IP_NF_MATCH_STATE=m
CONFIG_IP_NF_MATCH_CONNTRACK=m
# CONFIG_IP_NF_MATCH_OWNER is not set
# CONFIG_IP_NF_MATCH_ADDRTYPE is not set
# CONFIG_IP_NF_MATCH_REALM is not set
# CONFIG_IP_NF_MATCH_SCTP is not set
# CONFIG_IP_NF_MATCH_COMMENT is not set
# CONFIG_IP_NF_MATCH_HASHLIMIT is not set
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_LOG=m
# CONFIG_IP_NF_TARGET_ULOG is not set
# CONFIG_IP_NF_TARGET_TCPMSS is not set
CONFIG_IP_NF_NAT=m
CONFIG_IP_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
# CONFIG_IP_NF_TARGET_REDIRECT is not set
# CONFIG_IP_NF_TARGET_NETMAP is not set
# CONFIG_IP_NF_TARGET_SAME is not set
# CONFIG_IP_NF_NAT_LOCAL is not set
# CONFIG_IP_NF_NAT_SNMP_BASIC is not set
# CONFIG_IP_NF_MANGLE is not set
# CONFIG_IP_NF_RAW is not set
# CONFIG_IP_NF_ARPTABLES is not set
# CONFIG_IP_NF_COMPAT_IPCHAINS is not set
# CONFIG_IP_NF_COMPAT_IPFWADM is not set
#
# SCTP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_SCTP is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
# CONFIG_NET_CLS_ROUTE is not set
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_KGDBOE is not set
CONFIG_NETPOLL=y
# CONFIG_NETPOLL_RX is not set
# CONFIG_NETPOLL_TRAP is not set
CONFIG_NET_POLL_CONTROLLER=y
# CONFIG_HAMRADIO is not set
CONFIG_IRDA=m
#
# IrDA protocols
#
CONFIG_IRLAN=m
CONFIG_IRNET=m
CONFIG_IRCOMM=m
CONFIG_IRDA_ULTRA=y
#
# IrDA options
#
CONFIG_IRDA_CACHE_LAST_LSAP=y
CONFIG_IRDA_FAST_RR=y
CONFIG_IRDA_DEBUG=y
#
# Infrared-port device drivers
#
#
# SIR device drivers
#
CONFIG_IRTTY_SIR=m
#
# Dongle support
#
# CONFIG_DONGLE is not set
#
# Old SIR device drivers
#
CONFIG_IRPORT_SIR=m
#
# Old Serial dongle support
#
# CONFIG_DONGLE_OLD is not set
#
# FIR device drivers
#
# CONFIG_USB_IRDA is not set
# CONFIG_SIGMATEL_FIR is not set
# CONFIG_NSC_FIR is not set
# CONFIG_WINBOND_FIR is not set
# CONFIG_TOSHIBA_FIR is not set
# CONFIG_SMC_IRCC_FIR is not set
# CONFIG_ALI_FIR is not set
# CONFIG_VLSI_FIR is not set
# CONFIG_VIA_FIR is not set
# CONFIG_BT is not set
CONFIG_NETDEVICES=y
CONFIG_DUMMY=m
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
CONFIG_TUN=m
# CONFIG_NET_SB1000 is not set
#
# ARCnet devices
#
# CONFIG_ARCNET is not set
#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_LANCE is not set
# CONFIG_NET_VENDOR_SMC is not set
# CONFIG_NET_VENDOR_RACAL is not set
#
# Tulip family network device support
#
# CONFIG_NET_TULIP is not set
# CONFIG_AT1700 is not set
# CONFIG_DEPCA is not set
# CONFIG_HP100 is not set
# CONFIG_NET_ISA is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_AC3200 is not set
# CONFIG_APRICOT is not set
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
# CONFIG_CS89x0 is not set
# CONFIG_DGRS is not set
# CONFIG_EEPRO100 is not set
CONFIG_E100=y
CONFIG_E100_NAPI=y
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
# CONFIG_NE2K_PCI is not set
# CONFIG_8139CP is not set
# CONFIG_8139TOO is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_NET_POCKET is not set
#
# Ethernet (1000 Mbit)
#
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
#
# Ethernet (10000 Mbit)
#
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
#
# Token Ring devices
#
# CONFIG_TR is not set
#
# Wireless LAN (non-hamradio)
#
CONFIG_NET_RADIO=y
#
# Obsolete Wireless cards support (pre-802.11)
#
# CONFIG_STRIP is not set
# CONFIG_ARLAN is not set
# CONFIG_WAVELAN is not set
# CONFIG_PCMCIA_WAVELAN is not set
# CONFIG_PCMCIA_NETWAVE is not set
#
# Wireless 802.11 Frequency Hopping cards support
#
# CONFIG_PCMCIA_RAYCS is not set
#
# Wireless 802.11b ISA/PCI cards support
#
# CONFIG_AIRO is not set
CONFIG_HERMES=m
# CONFIG_PLX_HERMES is not set
# CONFIG_TMD_HERMES is not set
# CONFIG_PCI_HERMES is not set
# CONFIG_ATMEL is not set
#
# Wireless 802.11b Pcmcia/Cardbus cards support
#
CONFIG_PCMCIA_HERMES=m
# CONFIG_AIRO_CS is not set
# CONFIG_PCMCIA_WL3501 is not set
#
# Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support
#
# CONFIG_PRISM54 is not set
# CONFIG_HOSTAP is not set
CONFIG_NET_WIRELESS=y
#
# PCMCIA network device support
#
CONFIG_NET_PCMCIA=y
# CONFIG_PCMCIA_3C589 is not set
# CONFIG_PCMCIA_3C574 is not set
# CONFIG_PCMCIA_FMVJ18X is not set
# CONFIG_PCMCIA_PCNET is not set
# CONFIG_PCMCIA_NMCLAN is not set
# CONFIG_PCMCIA_SMC91C92 is not set
# CONFIG_PCMCIA_XIRC2PS is not set
# CONFIG_PCMCIA_AXNET is not set
#
# Wan interfaces
#
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
CONFIG_PLIP=m
CONFIG_PPP=m
# CONFIG_PPP_MULTILINK is not set
# CONFIG_PPP_FILTER is not set
CONFIG_PPP_ASYNC=m
# CONFIG_PPP_SYNC_TTY is not set
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_BSDCOMP=m
# CONFIG_PPPOE is not set
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
# CONFIG_SHAPER is not set
CONFIG_NETCONSOLE=m
#
# ISDN subsystem
#
# CONFIG_ISDN is not set
#
# Telephony Support
#
# CONFIG_PHONE is not set
#
# Input device support
#
CONFIG_INPUT=y
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_TSDEV is not set
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set
#
# Input I/O drivers
#
# CONFIG_GAMEPORT is not set
CONFIG_SOUND_GAMEPORT=y
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
# CONFIG_SERIO_SERPORT is not set
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PARKBD is not set
CONFIG_SERIO_PCIPS2=m
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_INPORT is not set
# CONFIG_MOUSE_LOGIBM is not set
# CONFIG_MOUSE_PC110PAD is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
CONFIG_INPUT_MISC=y
CONFIG_INPUT_PCSPKR=y
# CONFIG_INPUT_UINPUT is not set
#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
# Serial drivers
#
CONFIG_SERIAL_8250=y
# CONFIG_SERIAL_8250_CONSOLE is not set
# CONFIG_SERIAL_8250_CS is not set
# CONFIG_SERIAL_8250_ACPI is not set
CONFIG_SERIAL_8250_NR_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set
#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
CONFIG_PRINTER=m
# CONFIG_LP_CONSOLE is not set
# CONFIG_PPDEV is not set
# CONFIG_TIPAR is not set
#
# IPMI
#
# CONFIG_IPMI_HANDLER is not set
#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
CONFIG_HW_RANDOM=m
# CONFIG_NVRAM is not set
CONFIG_RTC=m
CONFIG_GEN_RTC=m
CONFIG_GEN_RTC_X=y
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_SONYPI is not set
#
# Ftape, the floppy tape device driver
#
# CONFIG_FTAPE is not set
CONFIG_AGP=y
# CONFIG_AGP_ALI is not set
# CONFIG_AGP_ATI is not set
# CONFIG_AGP_AMD is not set
# CONFIG_AGP_AMD64 is not set
CONFIG_AGP_INTEL=y
# CONFIG_AGP_INTEL_MCH is not set
# CONFIG_AGP_NVIDIA is not set
# CONFIG_AGP_SIS is not set
# CONFIG_AGP_SWORKS is not set
# CONFIG_AGP_VIA is not set
# CONFIG_AGP_EFFICEON is not set
CONFIG_DRM=y
# CONFIG_DRM_TDFX is not set
# CONFIG_DRM_GAMMA is not set
# CONFIG_DRM_R128 is not set
CONFIG_DRM_RADEON=y
# CONFIG_DRM_I810 is not set
# CONFIG_DRM_I830 is not set
# CONFIG_DRM_I915 is not set
# CONFIG_DRM_MGA is not set
# CONFIG_DRM_SIS is not set
#
# PCMCIA character devices
#
# CONFIG_SYNCLINK_CS is not set
# CONFIG_MWAVE is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_HPET is not set
# CONFIG_HANGCHECK_TIMER is not set
#
# I2C support
#
CONFIG_I2C=y
# CONFIG_I2C_CHARDEV is not set
#
# I2C Algorithms
#
CONFIG_I2C_ALGOBIT=y
CONFIG_I2C_ALGOPCF=y
# CONFIG_I2C_ALGOPCA is not set
#
# I2C Hardware Bus support
#
CONFIG_I2C_ALI1535=y
# CONFIG_I2C_ALI1563 is not set
CONFIG_I2C_ALI15X3=y
CONFIG_I2C_AMD756=y
# CONFIG_I2C_AMD756_S4882 is not set
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_ELEKTOR is not set
# CONFIG_I2C_I801 is not set
# CONFIG_I2C_I810 is not set
# CONFIG_I2C_ISA is not set
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_PARPORT is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_PIIX4 is not set
# CONFIG_I2C_PROSAVAGE is not set
# CONFIG_I2C_SAVAGE4 is not set
# CONFIG_SCx200_ACB is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_STUB is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
# CONFIG_I2C_VOODOO3 is not set
# CONFIG_I2C_PCA_ISA is not set
#
# Hardware Sensors Chip support
#
# CONFIG_I2C_SENSOR is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ASB100 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_FSCHER is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM63 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_LM80 is not set
# CONFIG_SENSORS_LM83 is not set
# CONFIG_SENSORS_LM85 is not set
# CONFIG_SENSORS_LM87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83627HF is not set
#
# Other I2C Chip support
#
# CONFIG_SENSORS_EEPROM is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_RTC8564 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
#
# Dallas's 1-wire bus
#
# CONFIG_W1 is not set
#
# Misc devices
#
# CONFIG_IBM_ASM is not set
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
#
# Digital Video Broadcasting Devices
#
# CONFIG_DVB is not set
#
# Graphics support
#
CONFIG_FB=y
CONFIG_FB_MODE_HELPERS=y
# CONFIG_FB_TILEBLITTING is not set
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_VGA16 is not set
# CONFIG_FB_VESA is not set
CONFIG_VIDEO_SELECT=y
# CONFIG_FB_HGA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_I810 is not set
# CONFIG_FB_INTEL is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON_OLD is not set
CONFIG_FB_RADEON=y
# CONFIG_FB_RADEON_I2C is not set
# CONFIG_FB_RADEON_DEBUG is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_VIRTUAL is not set
#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
# CONFIG_MDA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
#
# Logo configuration
#
CONFIG_LOGO=y
CONFIG_LOGO_LINUX_MONO=y
CONFIG_LOGO_LINUX_VGA16=y
CONFIG_LOGO_LINUX_CLUT224=y
#
# Sound
#
CONFIG_SOUND=m
#
# Advanced Linux Sound Architecture
#
CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
CONFIG_SND_SEQUENCER=m
CONFIG_SND_SEQ_DUMMY=m
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
CONFIG_SND_SEQUENCER_OSS=y
# CONFIG_SND_RTCTIMER is not set
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
#
# Generic devices
#
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_VIRMIDI is not set
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set
#
# ISA devices
#
# CONFIG_SND_AD1848 is not set
# CONFIG_SND_CS4231 is not set
# CONFIG_SND_CS4232 is not set
# CONFIG_SND_CS4236 is not set
# CONFIG_SND_ES1688 is not set
# CONFIG_SND_ES18XX is not set
# CONFIG_SND_GUSCLASSIC is not set
# CONFIG_SND_GUSEXTREME is not set
# CONFIG_SND_GUSMAX is not set
# CONFIG_SND_INTERWAVE is not set
# CONFIG_SND_INTERWAVE_STB is not set
# CONFIG_SND_OPTI92X_AD1848 is not set
# CONFIG_SND_OPTI92X_CS4231 is not set
# CONFIG_SND_OPTI93X is not set
# CONFIG_SND_SB8 is not set
# CONFIG_SND_SB16 is not set
# CONFIG_SND_SBAWE is not set
# CONFIG_SND_WAVEFRONT is not set
# CONFIG_SND_CMI8330 is not set
# CONFIG_SND_OPL3SA2 is not set
# CONFIG_SND_SGALAXY is not set
# CONFIG_SND_SSCAPE is not set
#
# PCI devices
#
CONFIG_SND_AC97_CODEC=m
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_YMFPCI is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
CONFIG_SND_MAESTRO3=m
# CONFIG_SND_FM801 is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
CONFIG_SND_INTEL8X0=m
# CONFIG_SND_INTEL8X0M is not set
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VX222 is not set
#
# USB devices
#
# CONFIG_SND_USB_AUDIO is not set
# CONFIG_SND_USB_USX2Y is not set
#
# PCMCIA devices
#
# CONFIG_SND_VXPOCKET is not set
# CONFIG_SND_VXP440 is not set
# CONFIG_SND_PDAUDIOCF is not set
#
# Open Sound System
#
# CONFIG_SOUND_PRIME is not set
#
# USB support
#
CONFIG_USB=m
# CONFIG_USB_DEBUG is not set
#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
CONFIG_USB_BANDWIDTH=y
# CONFIG_USB_DYNAMIC_MINORS is not set
CONFIG_USB_SUSPEND=y
# CONFIG_USB_OTG is not set
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
#
# USB Host Controller Drivers
#
# CONFIG_USB_EHCI_HCD is not set
# CONFIG_USB_OHCI_HCD is not set
CONFIG_USB_UHCI_HCD=m
#
# USB Device Class drivers
#
# CONFIG_USB_AUDIO is not set
# CONFIG_USB_BLUETOOTH_TTY is not set
# CONFIG_USB_MIDI is not set
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_RW_DETECT is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_DPCM is not set
# CONFIG_USB_STORAGE_HP8200e is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
#
# USB Input Devices
#
CONFIG_USB_HID=m
CONFIG_USB_HIDINPUT=y
# CONFIG_HID_FF is not set
CONFIG_USB_HIDDEV=y
#
# USB HID Boot Protocol drivers
#
# CONFIG_USB_KBD is not set
# CONFIG_USB_MOUSE is not set
# CONFIG_USB_AIPTEK is not set
# CONFIG_USB_WACOM is not set
# CONFIG_USB_KBTAB is not set
# CONFIG_USB_POWERMATE is not set
# CONFIG_USB_MTOUCH is not set
# CONFIG_USB_EGALAX is not set
# CONFIG_USB_XPAD is not set
# CONFIG_USB_ATI_REMOTE is not set
#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
# CONFIG_USB_HPUSBSCSI is not set
#
# USB Multimedia devices
#
# CONFIG_USB_DABUSB is not set
#
# Video4Linux support is needed for USB Multimedia device support
#
#
# USB Network adaptors
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set
#
# USB port drivers
#
# CONFIG_USB_USS720 is not set
#
# USB Serial Converter support
#
CONFIG_USB_SERIAL=m
# CONFIG_USB_SERIAL_GENERIC is not set
# CONFIG_USB_SERIAL_BELKIN is not set
# CONFIG_USB_SERIAL_WHITEHEAT is not set
# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
# CONFIG_USB_SERIAL_EMPEG is not set
# CONFIG_USB_SERIAL_FTDI_SIO is not set
CONFIG_USB_SERIAL_VISOR=m
# CONFIG_USB_SERIAL_IPAQ is not set
# CONFIG_USB_SERIAL_IR is not set
# CONFIG_USB_SERIAL_EDGEPORT is not set
# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
# CONFIG_USB_SERIAL_IPW is not set
# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
# CONFIG_USB_SERIAL_KEYSPAN is not set
# CONFIG_USB_SERIAL_KLSI is not set
# CONFIG_USB_SERIAL_KOBIL_SCT is not set
# CONFIG_USB_SERIAL_MCT_U232 is not set
# CONFIG_USB_SERIAL_PL2303 is not set
# CONFIG_USB_SERIAL_SAFE is not set
# CONFIG_USB_SERIAL_CYBERJACK is not set
# CONFIG_USB_SERIAL_XIRCOM is not set
# CONFIG_USB_SERIAL_OMNINET is not set
#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_TIGL is not set
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_PHIDGETKIT is not set
# CONFIG_USB_PHIDGETSERVO is not set
# CONFIG_USB_TEST is not set
#
# USB ATM/DSL drivers
#
#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
#
# File systems
#
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
CONFIG_REISERFS_FS=m
# CONFIG_REISERFS_CHECK is not set
CONFIG_REISERFS_PROC_INFO=y
CONFIG_REISERFS_FS_XATTR=y
CONFIG_REISERFS_FS_POSIX_ACL=y
# CONFIG_REISERFS_FS_SECURITY is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
# CONFIG_XFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
CONFIG_AUTOFS_FS=m
CONFIG_AUTOFS4_FS=m
#
# Caches
#
# CONFIG_FSCACHE is not set
#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_ZISOFS_FS=m
CONFIG_UDF_FS=m
CONFIG_UDF_NLS=y
#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_CODEPAGE=850
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-15"
# CONFIG_NTFS_FS is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
CONFIG_DEVFS_FS=y
# CONFIG_DEVFS_MOUNT is not set
# CONFIG_DEVFS_DEBUG is not set
# CONFIG_DEVPTS_FS_XATTR is not set
CONFIG_TMPFS=y
# CONFIG_TMPFS_XATTR is not set
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
#
# Network File Systems
#
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
# CONFIG_NFS_V4 is not set
# CONFIG_NFS_DIRECTIO is not set
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
# CONFIG_NFSD_V4 is not set
# CONFIG_NFSD_TCP is not set
CONFIG_LOCKD=m
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
CONFIG_SUNRPC=m
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
CONFIG_SMB_NLS_DEFAULT=y
CONFIG_SMB_NLS_REMOTE="cp850"
CONFIG_CIFS=m
CONFIG_CIFS_STATS=y
CONFIG_CIFS_XATTR=y
CONFIG_CIFS_POSIX=y
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
#
# Native Language Support
#
CONFIG_NLS=m
CONFIG_NLS_DEFAULT="iso8859-15"
CONFIG_NLS_CODEPAGE_437=m
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
CONFIG_NLS_CODEPAGE_850=m
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=m
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
CONFIG_NLS_ISO8859_15=m
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=m
#
# Profiling support
#
# CONFIG_PROFILING is not set
#
# Kernel hacking
#
CONFIG_DEBUG_KERNEL=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_SCHEDSTATS=y
# CONFIG_DEBUG_SLAB is not set
CONFIG_DEBUG_PREEMPT=y
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_INFO is not set
# CONFIG_FRAME_POINTER is not set
CONFIG_EARLY_PRINTK=y
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_KPROBES is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_4KSTACKS=y
CONFIG_X86_FIND_SMP_CONFIG=y
CONFIG_X86_MPPARSE=y
# CONFIG_KGDB is not set
#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
#
# Cryptographic options
#
# CONFIG_CRYPTO is not set
#
# Library routines
#
CONFIG_CRC_CCITT=m
# CONFIG_CRC32 is not set
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=m
CONFIG_ZLIB_DEFLATE=m
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_X86_BIOS_REBOOT=y
CONFIG_PC=y
Brice Goglin wrote:
> Hi Andrew,
>
> LD .tmp_vmlinux1
> drivers/built-in.o(.text+0x1c5a4): In function `fbcon_set_font':
> : undefined reference to `crc32_le'
> make: *** [.tmp_vmlinux1] Erreur 1
I had this too, resolved by compiling CRC32 built in and not as a module.
--
Stefano RIVOIR
On Thu, 2004-11-11 at 01:23 -0800, Andrew Morton wrote:
> +fbdev-add-vram-option-to-intelfb.patch
> +fbdev-fix-for-using-16-pixel-wide-font-in-fb-console.patch
> +fbdev-support-for-bigger-than-16x32-fonts-in-softcursor.patch
> +fbdev-support-for-bigger-than-16x32-fonts-in-rivafb-cursor.patch
> +fbcon-disable-fbcon-cursor-if-vt-softcursor-is-enabled.patch
> +fbdev-allow-mode-change-even-if-edid-block-is-not-found.patch
> +fbdev-fix-cursor-in-doublescan-mode-in-atyfb.patch
> +fbdev-fix-typo-in-atyfb.patch
> +fbdev-change-the-find_mode-behavior.patch
>
> fbdev updates
>
The kernel does not link an AMD64:
LD vmlinux
drivers/built-in.o(.text+0x7f53): In function `fbcon_set_font':
: undefined reference to `crc32_le'
This is the code snipped from drivers/video/console/fbcon.c (line 2303):
/* Since linux has a nice crc32 function use it for counting font
* checksums. */
csum = crc32(0, new_data, size);
After switching on CONFIG_CRC32, the kernel is linked correctly.
__
Markus
Andrew Morton <[email protected]> wrote:
>
> ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.10-rc1/2.6.10-rc1-mm5/
Needs a fixup for CONFIG_HIGHMEM
--- linux-bix/include/asm/highmem.h~a 2004-11-11 03:07:37.105728944 -0800
+++ linux-bix-akpm/include/asm/highmem.h 2004-11-11 03:07:49.511842928 -0800
@@ -62,7 +62,7 @@ void kunmap(struct page *page);
char *kmap_atomic(struct page *page, enum km_type type);
void kunmap_atomic(char *kvaddr, enum km_type type);
char *kmap_atomic_pfn(unsigned long pfn, enum km_type type);
-struct page *kmap_atomic_to_page(void *ptr);
+struct page *kmap_atomic_to_page(char *ptr);
#define flush_cache_kmaps() do { } while (0)
_
Brice Goglin <[email protected]> wrote:
>
> LD .tmp_vmlinux1
> drivers/built-in.o(.text+0x1c5a4): In function `fbcon_set_font':
> : undefined reference to `crc32_le'
I guess we do it this way:
--- 25/drivers/video/console/Kconfig~fbdev-fix-for-using-16-pixel-wide-font-in-fb-console-config-fix 2004-11-11 03:11:32.464948904 -0800
+++ 25-akpm/drivers/video/console/Kconfig 2004-11-11 03:12:00.013760848 -0800
@@ -105,6 +105,7 @@ config DUMMY_CONSOLE
config FRAMEBUFFER_CONSOLE
tristate "Framebuffer Console support"
depends on FB
+ select CRC32
config FONTS
bool "Select compiled-in fonts"
_
On Thursday 11 of November 2004 10:23, Andrew Morton wrote:
>
>
ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.10-rc1/2.6.10-rc1-mm5/
On an AMD64 box (Athlon 64 + NForce3) I get these messages from yenta_socket:
yenta_socket: Unknown symbol dead_socket
yenta_socket: Unknown symbol pcmcia_register_socket
yenta_socket: Unknown symbol pcmcia_socket_dev_resume
yenta_socket: Unknown symbol pcmcia_parse_events
yenta_socket: Unknown symbol pcmcia_socket_dev_suspend
yenta_socket: Unknown symbol pcmcia_unregister_socket
but the module loads.
Greets,
RJW
--
- Would you tell me, please, which way I ought to go from here?
- That depends a good deal on where you want to get to.
-- Lewis Carroll "Alice's Adventures in Wonderland"
"Rafael J. Wysocki" <[email protected]> wrote:
>
> On Thursday 11 of November 2004 10:23, Andrew Morton wrote:
> >
> >
> ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.10-rc1/2.6.10-rc1-mm5/
>
> On an AMD64 box (Athlon 64 + NForce3) I get these messages from yenta_socket:
>
> yenta_socket: Unknown symbol dead_socket
> yenta_socket: Unknown symbol pcmcia_register_socket
> yenta_socket: Unknown symbol pcmcia_socket_dev_resume
> yenta_socket: Unknown symbol pcmcia_parse_events
> yenta_socket: Unknown symbol pcmcia_socket_dev_suspend
> yenta_socket: Unknown symbol pcmcia_unregister_socket
>
hm, I haven't seen that before. Rusty, any ideas what we might have done
to provoke this?
On Thursday 11 of November 2004 13:21, Andrew Morton wrote:
> "Rafael J. Wysocki" <[email protected]> wrote:
> >
> > On Thursday 11 of November 2004 10:23, Andrew Morton wrote:
> > >
> > >
> >
ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.10-rc1/2.6.10-rc1-mm5/
> >
> > On an AMD64 box (Athlon 64 + NForce3) I get these messages from
yenta_socket:
> >
> > yenta_socket: Unknown symbol dead_socket
> > yenta_socket: Unknown symbol pcmcia_register_socket
> > yenta_socket: Unknown symbol pcmcia_socket_dev_resume
> > yenta_socket: Unknown symbol pcmcia_parse_events
> > yenta_socket: Unknown symbol pcmcia_socket_dev_suspend
> > yenta_socket: Unknown symbol pcmcia_unregister_socket
> >
>
> hm, I haven't seen that before. Rusty, any ideas what we might have done
> to provoke this?
I have just searched my logs. It was there in 2.6.8.1 and went away in
2.6.9-rc1-mm5. Then, it reappeared in 2.6.10-rc1-mm2 (I didn't notice) and
it's been there since.
Greets,
RJW
--
- Would you tell me, please, which way I ought to go from here?
- That depends a good deal on where you want to get to.
-- Lewis Carroll "Alice's Adventures in Wonderland"
REISER4_LARGE_KEY is still selectable in reiser4-include-reiser4.patch
(and we agreed that it shouldn't be).
cu
Adrian
--
"Is there not promise of rain?" Ling Tan asked suddenly out
of the darkness. There had been need of rain for many days.
"Only a promise," Lao Er said.
Pearl S. Buck - Dragon Seed
Adrian Bunk wrote:
>REISER4_LARGE_KEY is still selectable in reiser4-include-reiser4.patch
>(and we agreed that it shouldn't be).
>
>cu
>Adrian
>
>
>
thanks for catching that, vs, please fix and send patch.
Hi Hans,
both the reiser3 and reiser4 copyright statements contain:
<-- snip -->
Reiser4 is hereby licensed under the GNU General
Public License version 2.
Source code files that contain the phrase "licensing governed by
reiser4/README" are "governed files" throughout this file. Governed
files are licensed under the GPL. The portions of them owned by Hans
Reiser, or authorized to be licensed by him, have been in the past,
and likely will be in the future, licensed to other parties under
other licenses. If you add your code to governed files, and don't
want it to be owned by Hans Reiser, put your copyright label on that
code so the poor blight and his customers can keep things straight.
All portions of governed files not labeled otherwise are owned by Hans
Reiser, and by adding your code to it, widely distributing it to
others or sending us a patch, and leaving the sentence in stating that
licensing is governed by the statement in this file, you accept this.
...
<-- snip -->
I have no problem with dual-licensed code, but I do strongly dislike
having this "unlike you explicitley state otherwise, you transfer all
rights to Hans Reiser" in the kernel.
Besides the fact that giving the copyright completely away is nothing
that is legally possible in at least Germany, I'm not happy with having
to check every single file in the source tree for additional licence
clauses before editing it - and then to consider whether my contribution
might deserve a copyright label according to my local law.
cu
Adrian
--
"Is there not promise of rain?" Ling Tan asked suddenly out
of the darkness. There had been need of rain for many days.
"Only a promise," Lao Er said.
Pearl S. Buck - Dragon Seed
> Needs a fixup for CONFIG_HIGHMEM
>
> --- linux-bix/include/asm/highmem.h~a 2004-11-11 03:07:37.105728944 -0800
> +++ linux-bix-akpm/include/asm/highmem.h 2004-11-11 03:07:49.511842928 -0800
> @@ -62,7 +62,7 @@ void kunmap(struct page *page);
> char *kmap_atomic(struct page *page, enum km_type type);
> void kunmap_atomic(char *kvaddr, enum km_type type);
> char *kmap_atomic_pfn(unsigned long pfn, enum km_type type);
> -struct page *kmap_atomic_to_page(void *ptr);
> +struct page *kmap_atomic_to_page(char *ptr);
>
> #define flush_cache_kmaps() do { } while (0)
That works. But something broke shmem:
ipc/shm.c:171: error: `shmem_set_policy' undeclared here (not in a function)
ipc/shm.c:171: error: initializer element is not constant
ipc/shm.c:171: error: (near initialization for `shm_vm_ops.set_policy')
ipc/shm.c:172: error: `shmem_get_policy' undeclared here (not in a function)
ipc/shm.c:172: error: initializer element is not constant
ipc/shm.c:172: error: (near initialization for `shm_vm_ops.get_policy')
make[1]: *** [ipc/shm.o] Error 1
make[1]: *** Waiting for unfinished jobs....
ftp://ftp.kernel.org/pub/linux/kernel/people/mbligh/config/config.numaq
Oddly, I can't see anything that changes shmem_get/set_policy in -mm patch.
But 2.6.10-rc1 compiles fine ... boggle.
M.
On Thu, 11 Nov 2004, Adrian Bunk wrote:
>
> I have no problem with dual-licensed code, but I do strongly dislike
> having this "unlike you explicitley state otherwise, you transfer all
> rights to Hans Reiser" in the kernel.
I don't see any reasonable alternatives. The alternative is for Hans
Reiser to not be able to merge with the kernel, which is kind of against
the _point_ of having a dual license.
If the wording grates or assignment is an issue (and yes, in the US you
technically really need to have an express _signed_ assignment, implied
assignments just don't work), asking people to make their changes PD
instead might work (they'd obviously immediately be subsumed under the GPL
as far as the kernel is concerned, but would allow the dual-licensing to
continue to work).
That said, I don't think at least _this_ particular area has been
problematic, because quite frankly, very few people end up working on
other peoples filesystems, so as far as I can tell, almost all reiserfs
fixes have really been mainlt due to interface changes, nothing else. So
assignment of copyright etc doesn't really ever become an issue, if only
because copyrights require a bit of actual artistic value ;)
Linus
"Martin J. Bligh" <[email protected]> wrote:
>
> ipc/shm.c:171: error: `shmem_set_policy' undeclared here (not in a function)
> ipc/shm.c:171: error: initializer element is not constant
> ipc/shm.c:171: error: (near initialization for `shm_vm_ops.set_policy')
> ipc/shm.c:172: error: `shmem_get_policy' undeclared here (not in a function)
> ipc/shm.c:172: error: initializer element is not constant
> ipc/shm.c:172: error: (near initialization for `shm_vm_ops.get_policy')
hm, I'd have thought that -linus would have the same problem...
--- 25/ipc/shm.c~ipc-numa-build-fix 2004-11-11 14:12:11.874421600 -0800
+++ 25-akpm/ipc/shm.c 2004-11-11 14:12:27.949977744 -0800
@@ -167,7 +167,7 @@ static struct vm_operations_struct shm_v
.open = shm_open, /* callback for a new vm-area open */
.close = shm_close, /* callback for when the vm-area is released */
.nopage = shmem_nopage,
-#ifdef CONFIG_NUMA
+#if defined(CONFIG_NUMA) && defined(CONFIG_SHMEM)
.set_policy = shmem_set_policy,
.get_policy = shmem_get_policy,
#endif
_
"Martin J. Bligh" <[email protected]> wrote:
>
> That works. But something broke shmem:
>
> ipc/shm.c:171: error: `shmem_set_policy' undeclared here (not in a function)
> ipc/shm.c:171: error: initializer element is not constant
> ipc/shm.c:171: error: (near initialization for `shm_vm_ops.set_policy')
> ipc/shm.c:172: error: `shmem_get_policy' undeclared here (not in a function)
> ipc/shm.c:172: error: initializer element is not constant
> ipc/shm.c:172: error: (near initialization for `shm_vm_ops.get_policy')
OK, I tracked this down to another secret dhowells diff.
config SHMEM
- default y
- bool "Use full shmem filesystem" if EMBEDDED && MMU
+ bool "Use full shmem filesystem"
+ default y if EMBEDDED
+ depends on MMU
This change permits CONFIG_SHMEM=n on !CONFIG_MMU, even if !EMBEDDED. Or
something. I'm not really sure what it's trying to do, nor am I clear on
what semantics we wanted to have for CONFIG_SHMEM on CONFIG_MMU machines.
I think the semantics we want are: you always get shmem, unless you
selected EMBEDDED. So perhaps we want:
config SHMEM
bool "Use full shmem filesystem" if EMBEDDED
depends on MMU
default y if MMU
Hi Hans,
print_clog in fs/reiser4/debug.c works with values that get assigned by
clog_op - but clog_op has exactly zero callers.
cu
Adrian
--
"Is there not promise of rain?" Ling Tan asked suddenly out
of the darkness. There had been need of rain for many days.
"Only a promise," Lao Er said.
Pearl S. Buck - Dragon Seed
On Thu, 2004-11-11 at 13:45, Adrian Bunk wrote:
> If you add your code to governed files, and don't
> want it to be owned by Hans Reiser, put your copyright label on that
> code ... All portions of governed files not labeled otherwise are owned
> by Hans Reiser, and ... and leaving the sentence in stating that
> licensing is governed by the statement in this file, you accept this.
> Besides the fact that giving the copyright completely away is nothing
> that is legally possible in at least Germany, ...
Han's method is also very likely nugatory within the USA.
http://copyright.gov/title17/92chap2.html#204 clearly states that to
transfer title of copyrighted work requires a written instrument of
conveyance. That instrument of conveyance has to be signed and should in
many ways look a lot like a deed or title for real estate -- ie. it must
denote the boundaries of the transaction in a specific and explicit
manner. In this instance it would probably be required to state in as
unambiguous manner as possible which files and which versions this
transfer is to cover. In the case of patches to preexisting files; it
should also be specific as to which lines are to be covered unless one
writes it in a style like a "Quit Claim Deed".
--
http://dmoz.org/profiles/pollei.html
http://sourceforge.net/users/stephen_pollei/
http://www.orkut.com/Profile.aspx?uid=2455954990164098214
http://stephen_pollei.home.comcast.net/
GPG Key fingerprint = EF6F 1486 EC27 B5E7 E6E1 3C01 910F 6BB5 4A7D 9677
On Thu, 2004-11-11 at 14:51 -0800, Stephen Pollei wrote:
> On Thu, 2004-11-11 at 13:45, Adrian Bunk wrote:
> > If you add your code to governed files, and don't
> > want it to be owned by Hans Reiser, put your copyright label on that
> > code ... All portions of governed files not labeled otherwise are owned
> > by Hans Reiser, and ... and leaving the sentence in stating that
> > licensing is governed by the statement in this file, you accept this.
>
> > Besides the fact that giving the copyright completely away is nothing
> > that is legally possible in at least Germany, ...
>
> Han's method is also very likely nugatory within the USA.
>
> http://copyright.gov/title17/92chap2.html#204 clearly states that to
> transfer title of copyrighted work requires a written instrument of
> conveyance. That instrument of conveyance has to be signed and should in
> many ways look a lot like a deed or title for real estate -- ie. it must
> denote the boundaries of the transaction in a specific and explicit
> manner. In this instance it would probably be required to state in as
> unambiguous manner as possible which files and which versions this
> transfer is to cover. In the case of patches to preexisting files; it
> should also be specific as to which lines are to be covered unless one
> writes it in a style like a "Quit Claim Deed".
(not a lawyer, etc, etc. Just a LKML lurker.)
As I understand it, these things depend on the size of the changes. For
example, in the world of publishing, an editor may change spellings and
phrases, even add or remove entire paragraphs, but does not gain any
rights over the work by doing so.
If there was argument about this, deciding where the line is between a
edit and new work would be up to a court, no doubt. If I was deciding
it, changes to fit ReiserFS into a new VFS structure or fixing a locking
bug would be a "edit", while adding a new Reiser4 plugin or a more
efficient hash function would be "new work."
--
Zan Lynx <[email protected]>
Hi Hans,
is there any reason for this strange
fs/reiser4/linux-5_reiser4_syscall.patch
file shipped _inside_ reiser4-only.patch
cu
Adrian
--
"Is there not promise of rain?" Ling Tan asked suddenly out
of the darkness. There had been need of rain for many days.
"Only a promise," Lao Er said.
Pearl S. Buck - Dragon Seed
On Thu, 2004-11-11 at 13:11 +0100, Rafael J. Wysocki wrote:
> On Thursday 11 of November 2004 10:23, Andrew Morton wrote:
> >
> >
> ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.10-rc1/2.6.10-rc1-mm5/
>
> On an AMD64 box (Athlon 64 + NForce3) I get these messages from yenta_socket:
>
> yenta_socket: Unknown symbol dead_socket
> yenta_socket: Unknown symbol pcmcia_register_socket
> yenta_socket: Unknown symbol pcmcia_socket_dev_resume
> yenta_socket: Unknown symbol pcmcia_parse_events
> yenta_socket: Unknown symbol pcmcia_socket_dev_suspend
> yenta_socket: Unknown symbol pcmcia_unregister_socket
>
> but the module loads.
Well, if it spits that out it won't load. Sounds like a modprobe.conf
doing something tricky (like trying to load yenta_socket, which fails,
then loading what it needs).
Rusty.
--
A bad analogy is like a leaky screwdriver -- Richard Braakman
Hello
On Thu, 2004-11-11 at 19:50, Adrian Bunk wrote:
> REISER4_LARGE_KEY is still selectable in reiser4-include-reiser4.patch
> (and we agreed that it shouldn't be).
>
Sorry, concerning this problem - what did we agree about?
> cu
> Adrian
It doesn't boot on a 4-way itanium tiger, hangs right after:
[...]
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
mice: PS/2 mouse device common for all mice
atkbd.c: keyboard reset failed on isa0060/serio1
atkbd.c: keyboard reset failed on isa0060/serio0
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
EFI Variables Facility v0.08 2004-May-17
NET: Registered protocol family 2
IP: routing cache hash table of 16384 buckets, 256Kbytes
TCP: Hash tables configured (established 131072 bind 65536)
NET: Registered protocol family 1
--
Jens Axboe
> This change permits CONFIG_SHMEM=n on !CONFIG_MMU, even if !EMBEDDED. Or
> something. I'm not really sure what it's trying to do, nor am I clear on
> what semantics we wanted to have for CONFIG_SHMEM on CONFIG_MMU machines.
>
> I think the semantics we want are: you always get shmem, unless you
> selected EMBEDDED. So perhaps we want:
It boils down to:
(1) You can't use full shmem if !MMU. You have to use tinyshmem instead.
(2) On an embedded system, you might want to drop shmem because you don't
have much flash in which to store your kernel.
This seems to have the desired effect:
config SHMEM
bool "Use full shmem filesystem" if EMBEDDED
depends on MMU
default y if MMU
David
---
The attached patch fixes the semantics of the SHMEM kernel configuration
option. Manual selectability is not contingent on EMBEDDED being configured,
and the option as a whole is only available if MMU is configured.
Signed-Off-By: David Howells <[email protected]>
---
diff -uNrp /warthog/kernels/linux-2.6.10-rc1-mm5/init/Kconfig linux-2.6.10-rc1-mm5-frv/init/Kconfig
--- /warthog/kernels/linux-2.6.10-rc1-mm5/init/Kconfig 2004-11-11 11:48:41.000000000 +0000
+++ linux-2.6.10-rc1-mm5-frv/init/Kconfig 2004-11-12 10:40:28.583887179 +0000
@@ -327,8 +327,8 @@ config CC_OPTIMIZE_FOR_SIZE
If unsure, say N.
config SHMEM
- bool "Use full shmem filesystem"
- default y if EMBEDDED
+ bool "Use full shmem filesystem" if EMBEDDED
+ default y if MMU
depends on MMU
help
The shmem is an internal filesystem used to manage shared memory.
On Fri, Nov 12, 2004 at 10:07:59AM +0300, Vladimir Saveliev wrote:
> Hello
Hi Vladimir,
> On Thu, 2004-11-11 at 19:50, Adrian Bunk wrote:
> > REISER4_LARGE_KEY is still selectable in reiser4-include-reiser4.patch
> > (and we agreed that it shouldn't be).
>
> Sorry, concerning this problem - what did we agree about?
depending on the setting of REISER4_LARGE_KEY, there are two binary
incompatible variants of reiser4 (which can't be both supported by one
kernel).
Therefore, REISER4_LARGE_KEY shouldn't be asked but always enabled.
cu
Adrian
--
"Is there not promise of rain?" Ling Tan asked suddenly out
of the darkness. There had been need of rain for many days.
"Only a promise," Lao Er said.
Pearl S. Buck - Dragon Seed
This patch (gzip'ed due to the 100 kB limit on linux-kernel) is not
intended for immediate applying but requires a review.
I've gone throught the reiser4 code in 2.6.10-rc1-mm5, removed unused
code and made needlessly global code static.
Size comparison (with all through Kconfig available debugging enabled,
gcc 3.4 on i386):
1787503 2004-11-12 15:12 built-in.o
1821820 2004-11-11 23:55 built-in.o-before-cleanup
That's a 1.9% space saving with zero functionality loss.
diffstat output:
fs/reiser4/Makefile | 5
fs/reiser4/block_alloc.c | 29 ---
fs/reiser4/block_alloc.h | 10 -
fs/reiser4/carry.c | 25 +--
fs/reiser4/carry.h | 20 --
fs/reiser4/cluster.h | 4
fs/reiser4/context.c | 6
fs/reiser4/context.h | 5
fs/reiser4/coord.c | 43 -----
fs/reiser4/coord.h | 4
fs/reiser4/debug.c | 31 ---
fs/reiser4/debug.h | 4
fs/reiser4/estimate.c | 6
fs/reiser4/flush.c | 16 -
fs/reiser4/flush.h | 2
fs/reiser4/flush_queue.c | 4
fs/reiser4/inode.c | 13 -
fs/reiser4/inode.h | 2
fs/reiser4/jnode.c | 19 +-
fs/reiser4/jnode.h | 8
fs/reiser4/kassign.c | 37 ----
fs/reiser4/kassign.h | 3
fs/reiser4/kcond.c | 15 -
fs/reiser4/kcond.h | 3
fs/reiser4/lnode.c | 177 ----------------------
fs/reiser4/lnode.h | 6
fs/reiser4/lock.c | 2
fs/reiser4/log.c | 44 -----
fs/reiser4/log.h | 10 -
fs/reiser4/page_cache.c | 10 -
fs/reiser4/page_cache.h | 1
fs/reiser4/plugin/cryptcompress.c | 33 +---
fs/reiser4/plugin/cryptcompress.h | 1
fs/reiser4/plugin/dir/dir.c | 4
fs/reiser4/plugin/dir/hashed_dir.c | 2
fs/reiser4/plugin/file/file.c | 31 +--
fs/reiser4/plugin/file/funcs.h | 1
fs/reiser4/plugin/file/pseudo.c | 2
fs/reiser4/plugin/file/tail_conversion.c | 10 -
fs/reiser4/plugin/item/ctail.c | 9 -
fs/reiser4/plugin/item/ctail.h | 2
fs/reiser4/plugin/item/extent.c | 8
fs/reiser4/plugin/item/extent.h | 2
fs/reiser4/plugin/item/extent_flush_ops.c | 4
fs/reiser4/plugin/item/item.c | 2
fs/reiser4/plugin/item/tail.c | 2
fs/reiser4/plugin/node/node.c | 92 -----------
fs/reiser4/plugin/node/node.h | 5
fs/reiser4/plugin/node/node40.c | 16 -
fs/reiser4/plugin/node/node40.h | 2
fs/reiser4/plugin/object.c | 8
fs/reiser4/plugin/object.h | 2
fs/reiser4/plugin/plugin.c | 23 --
fs/reiser4/plugin/plugin_set.c | 37 +---
fs/reiser4/plugin/plugin_set.h | 4
fs/reiser4/plugin/space/bitmap.c | 6
fs/reiser4/plugin/space/bitmap.h | 1
fs/reiser4/pool.c | 2
fs/reiser4/pool.h | 1
fs/reiser4/repacker.c | 6
fs/reiser4/repacker.h | 1
fs/reiser4/safe_link.c | 2
fs/reiser4/safe_link.h | 1
fs/reiser4/search.c | 37 ----
fs/reiser4/stats.c | 2
fs/reiser4/stats.h | 3
fs/reiser4/super.c | 75 ---------
fs/reiser4/super.h | 8
fs/reiser4/tap.c | 9 -
fs/reiser4/tap.h | 2
fs/reiser4/tree.c | 16 -
fs/reiser4/tree.h | 9 -
fs/reiser4/txnmgr.c | 79 ---------
fs/reiser4/txnmgr.h | 11 -
fs/reiser4/wander.c | 2
fs/reiser4/znode.c | 155 ++++---------------
fs/reiser4/znode.h | 11 -
77 files changed, 189 insertions(+), 1116 deletions(-)
cu
Adrian
--
"Is there not promise of rain?" Ling Tan asked suddenly out
of the darkness. There had been need of rain for many days.
"Only a promise," Lao Er said.
Pearl S. Buck - Dragon Seed
On Fri, 12 Nov 2004 14:23:43 +0100, Adrian Bunk <[email protected]> wrote:
> On Fri, Nov 12, 2004 at 10:07:59AM +0300, Vladimir Saveliev wrote:
>
> > Hello
>
> Hi Vladimir,
>
> > On Thu, 2004-11-11 at 19:50, Adrian Bunk wrote:
> > > REISER4_LARGE_KEY is still selectable in reiser4-include-reiser4.patch
> > > (and we agreed that it shouldn't be).
> >
> > Sorry, concerning this problem - what did we agree about?
>
> depending on the setting of REISER4_LARGE_KEY, there are two binary
> incompatible variants of reiser4 (which can't be both supported by one
> kernel).
>
> Therefore, REISER4_LARGE_KEY shouldn't be asked but always enabled.
>
>
Is there a good reason to actually keep it in the kernel altogether?
methinks ripping it out entirely would be nicer than setting a config
default.
-DaMouse
>
> cu
> Adrian
>
--
I know I broke SOMETHING but its their fault for not fixing it before me
Hello
On Fri, 2004-11-12 at 16:23, Adrian Bunk wrote:
> On Fri, Nov 12, 2004 at 10:07:59AM +0300, Vladimir Saveliev wrote:
>
> > Hello
>
> Hi Vladimir,
>
> > On Thu, 2004-11-11 at 19:50, Adrian Bunk wrote:
> > > REISER4_LARGE_KEY is still selectable in reiser4-include-reiser4.patch
> > > (and we agreed that it shouldn't be).
> >
> > Sorry, concerning this problem - what did we agree about?
>
> depending on the setting of REISER4_LARGE_KEY, there are two binary
> incompatible variants of reiser4 (which can't be both supported by one
> kernel).
>
> Therefore, REISER4_LARGE_KEY shouldn't be asked but always enabled.
>
One may create reiser4 with so called short keys. In current state of
code enabling LARGE_KEY will make impossible to use that filesystem.
So, while reiser4 is not able to distinguish key type on fly we let user
to look for and undefive REISER4_LARGE_KEY macro directly in source
code?
> cu
> Adrian
On Fri, Nov 12, 2004 at 10:50:58AM +0000, David Howells wrote:
>
> > This change permits CONFIG_SHMEM=n on !CONFIG_MMU, even if !EMBEDDED. Or
> > something. I'm not really sure what it's trying to do, nor am I clear on
> > what semantics we wanted to have for CONFIG_SHMEM on CONFIG_MMU machines.
> >
> > I think the semantics we want are: you always get shmem, unless you
> > selected EMBEDDED. So perhaps we want:
>
> It boils down to:
>
> (1) You can't use full shmem if !MMU. You have to use tinyshmem instead.
>
> (2) On an embedded system, you might want to drop shmem because you don't
> have much flash in which to store your kernel.
>
> This seems to have the desired effect:
Note that tiny-shmem really only makes sense for MMU if SWAP is not set.
On Thu, Nov 11, 2004 at 01:59:37PM -0800, Linus Torvalds wrote:
> > I have no problem with dual-licensed code, but I do strongly dislike
> > having this "unlike you explicitley state otherwise, you transfer all
> > rights to Hans Reiser" in the kernel.
>
> I don't see any reasonable alternatives. The alternative is for Hans
> Reiser to not be able to merge with the kernel, which is kind of against
> the _point_ of having a dual license.
If you touch e.g. XFS for a non-trivial change you'll also get a mail from
SGI politely asking to assign your copyright. Doing this implicit is IMHO
a reall bad thing.
IF you really think it's something we should do the least thing to do is
to put a BIG WAIVER into every file for which this is in effect.
On Fri, Nov 12, 2004 at 04:47:45PM +0000, Christoph Hellwig wrote:
> On Thu, Nov 11, 2004 at 01:59:37PM -0800, Linus Torvalds wrote:
> > > I have no problem with dual-licensed code, but I do strongly dislike
> > > having this "unlike you explicitley state otherwise, you transfer all
> > > rights to Hans Reiser" in the kernel.
> >
> > I don't see any reasonable alternatives. The alternative is for Hans
> > Reiser to not be able to merge with the kernel, which is kind of against
> > the _point_ of having a dual license.
>
> If you touch e.g. XFS for a non-trivial change you'll also get a mail from
> SGI politely asking to assign your copyright. Doing this implicit is IMHO
> a really bad thing.
Btw, reiser3 handling was similar. At least Hans wanted an assigment from
me for even really trivial changes (which I still insist aren't copyrightable)
On Fri, Nov 12, 2004 at 06:11:28PM +0100, Adrian Bunk wrote:
> On Fri, Nov 12, 2004 at 05:06:36PM +0000, Christoph Hellwig wrote:
> >
> > Btw, reiser3 handling was similar. At least Hans wanted an assigment from
> > me for even really trivial changes (which I still insist aren't copyrightable)
>
> reiser3 has the same "automatically assign the copyright to Hans" clause
> (see the subject of this thread).
I can only say what happened to me a few years ago.
On Fri, Nov 12, 2004 at 05:06:36PM +0000, Christoph Hellwig wrote:
>
> Btw, reiser3 handling was similar. At least Hans wanted an assigment from
> me for even really trivial changes (which I still insist aren't copyrightable)
reiser3 has the same "automatically assign the copyright to Hans" clause
(see the subject of this thread).
cu
Adrian
--
"Is there not promise of rain?" Ling Tan asked suddenly out
of the darkness. There had been need of rain for many days.
"Only a promise," Lao Er said.
Pearl S. Buck - Dragon Seed
On Fri, Nov 12, 2004 at 07:37:59PM +0300, Vladimir Saveliev wrote:
> Hello
Hi Vladimir,
> On Fri, 2004-11-12 at 16:23, Adrian Bunk wrote:
> > On Fri, Nov 12, 2004 at 10:07:59AM +0300, Vladimir Saveliev wrote:
> > > On Thu, 2004-11-11 at 19:50, Adrian Bunk wrote:
> > > > REISER4_LARGE_KEY is still selectable in reiser4-include-reiser4.patch
> > > > (and we agreed that it shouldn't be).
> > >
> > > Sorry, concerning this problem - what did we agree about?
> >
> > depending on the setting of REISER4_LARGE_KEY, there are two binary
> > incompatible variants of reiser4 (which can't be both supported by one
> > kernel).
> >
> > Therefore, REISER4_LARGE_KEY shouldn't be asked but always enabled.
>
> One may create reiser4 with so called short keys. In current state of
> code enabling LARGE_KEY will make impossible to use that filesystem.
exactly that's the problem.
> So, while reiser4 is not able to distinguish key type on fly we let user
> to look for and undefive REISER4_LARGE_KEY macro directly in source
> code?
My personal preference was to simply remove the REISER4_LARGE_KEY=n
case, but Hans' suggestion to hide this option in a .h file without
being visible from the Kconfig files [1] is also OK.
cu
Adrian
[1] http://www.ussg.iu.edu/hypermail/linux/kernel/0410.2/2834.html
--
"Is there not promise of rain?" Ling Tan asked suddenly out
of the darkness. There had been need of rain for many days.
"Only a promise," Lao Er said.
Pearl S. Buck - Dragon Seed
On Thu, 2004-11-11 at 10:23, Andrew Morton wrote:
> ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.10-rc1/2.6.10-rc1-mm5/
>
>
> - Various updates to various things. Nothing really stands out.
Got a few of these running LTP (the second -x 4 run). I was beating up
NFS a bit when I saw this (this coming from the server side). UP x86 box
with netconsole using tulip NIC. No preempt involved and it doesn't
appear to happen if I don't put some IO pressure on it, seems
reproducible otherwise.
Badness in local_bh_enable at kernel/softirq.c:140
[<c011c3c6>] local_bh_enable+0x86/0x90
[<c038c4b7>] svc_write_space+0x27/0x90
[<c0335ebb>] sock_wfree+0x5b/0x60
[<c0337229>] __kfree_skb+0x49/0xe0
[<c03469b9>] zap_completion_queue+0x39/0x60
[<c03468cf>] netpoll_poll+0x7f/0xc0
[<c0346b1e>] netpoll_send_skb+0x7e/0xc0
[<c02dbf72>] write_msg+0x32/0x40
[<c02dbf40>] write_msg+0x0/0x40
[<c01178d5>] __call_console_drivers+0x45/0x50
[<c01179c5>] call_console_drivers+0x75/0x100
[<c0117d4e>] release_console_sem+0x5e/0xf0
[<c0117c3e>] vprintk+0xfe/0x160
[<c0117b37>] printk+0x17/0x20
[<c014880e>] sys_swapon+0x58e/0x790
[<c0103db3>] syscall_call+0x7/0xb
Badness in local_bh_enable at kernel/softirq.c:140
[<c0104db7>] dump_stack+0x17/0x20
[<c011cf45>] local_bh_enable+0x85/0x90
[<c038fde8>] svc_write_space+0x28/0x90
[<c0338e48>] sock_wfree+0x58/0x60
[<c033a179>] __kfree_skb+0x49/0xd0
[<c0349b6a>] zap_completion_queue+0x3a/0x60
[<c0349a7b>] netpoll_poll+0x7b/0xb0
[<c0349cc7>] netpoll_send_skb+0x87/0xd0
[<c02de37a>] write_msg+0x3a/0x50
[<c0118202>] __call_console_drivers+0x52/0x60
[<c01182ff>] call_console_drivers+0x7f/0x100
[<c011869a>] release_console_sem+0x6a/0x100
[<c011856e>] vprintk+0xfe/0x160
[<c0118468>] printk+0x18/0x20
[<c014abe7>] sys_swapon+0x5b7/0x7d0
[<c0103fb7>] syscall_call+0x7/0xb
Badness in local_bh_enable at kernel/softirq.c:140
[<c0104db7>] dump_stack+0x17/0x20
[<c011cf45>] local_bh_enable+0x85/0x90
[<c038fde8>] svc_write_space+0x28/0x90
[<c0338e48>] sock_wfree+0x58/0x60
[<c033a179>] __kfree_skb+0x49/0xd0
[<c0349b6a>] zap_completion_queue+0x3a/0x60
[<c0349a7b>] netpoll_poll+0x7b/0xb0
[<c0349cc7>] netpoll_send_skb+0x87/0xd0
[<c02de37a>] write_msg+0x3a/0x50
[<c0118202>] __call_console_drivers+0x52/0x60
[<c01182ff>] call_console_drivers+0x7f/0x100
[<c011869a>] release_console_sem+0x6a/0x100
[<c011856e>] vprintk+0xfe/0x160
[<c0118468>] printk+0x18/0x20
[<c014abe7>] sys_swapon+0x5b7/0x7d0
[<c0103fb7>] syscall_call+0x7/0xb
Please understand it as the emphasis is on don't obscure and distort my
definition in my labeling of the code of what I have copyrights to. I
believe that for that reason, a court would allow it. I could be
wrong. That is why I ask everyone I detect for a copyright assignment,
still to this day. I don't 100% trust the code acceptance process to
guarantee that I will catch everyone....
In a world with SCOs, we need to be over careful not under careful about
such things.
Hans
Christoph Hellwig wrote:
>
>I can only say what happened to me a few years ago.
>
>
>
>
>
On Thu, Nov 11, 2004 at 01:23:33AM -0800, Andrew Morton wrote:
>
> - Let me be the first to report this:
>
> *** Warning: "hotplug_path" [drivers/acpi/container.ko] undefined!
The acpi developers know about this and they said they would fix it in
their code tree before pushing to Linus.
thanks,
greg k-h
Hi Andrew,
This is fixed in the latest Len's acpi tree, when you pull from
his tree next time this should have been fixed.
Thanks,
Anil
>-----Original Message-----
>From: [email protected] [mailto:linux-kernel-
>[email protected]] On Behalf Of Greg KH
>Sent: Friday, November 12, 2004 4:12 PM
>To: Andrew Morton
>Cc: [email protected]
>Subject: Re: 2.6.10-rc1-mm5
>
>On Thu, Nov 11, 2004 at 01:23:33AM -0800, Andrew Morton wrote:
>>
>> - Let me be the first to report this:
>>
>> *** Warning: "hotplug_path" [drivers/acpi/container.ko]
undefined!
>
>The acpi developers know about this and they said they would fix it in
>their code tree before pushing to Linus.
>
>thanks,
>
>greg k-h
>-
>To unsubscribe from this list: send the line "unsubscribe linux-kernel"
in
>the body of a message to [email protected]
>More majordomo info at http://vger.kernel.org/majordomo-info.html
>Please read the FAQ at http://www.tux.org/lkml/
On Thu, 2004-11-11 at 01:23 -0800, Andrew Morton wrote:
> ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.10-rc1/2.6.10-rc1-mm5/
>
>
> - Various updates to various things. Nothing really stands out.
>
> - Let me be the first to report this:
>
> *** Warning: "kgdb_irq" [drivers/serial/serial_core.ko] undefined!
> *** Warning: "hotplug_path" [drivers/acpi/container.ko] undefined!
>
>
>
I want to imagine there is some reason why some threading apps will have
issues? I have since rc1-mm4 issues with evolution - some threads do
not seem to come out of sleep or get running time for some reason.
Unfortunately I cannot find the thread again. Is there a patch I can
apply/revert to get it to work for now?
Thanks,
--
Martin Schlemmer
Hi.
Andrew Morton wrote:
> ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.10-rc1/2.6.10-rc1-mm5/
Here are the few new problems that
I've got:
1. Local APIC stopped working. I know
I have to add "lapic" to the command-line,
but now this doesn't help (in -mm4 either
I think). dmesg says:
---
Kernel command line: ro root=/dev/hdc2 apm=power-off lapic nmi_watchdog=1
...
Local APIC not detected. Using dummy APIC emulation.
---
Is this known? Any other command-line option
to enable it again?
2. Radeon DRM driver stopped working.
dmesg says:
---
Linux agpgart interface v0.100 (c) Dave Jones
agpgart: Detected AMD Irongate chipset
agpgart: Maximum main memory to use for agp memory: 439M
agpgart: AGP aperture is 64M @ 0xe8000000
[drm] Initialized radeon 1.11.0 20020828 on minor 0: ATI Technologies Inc Radeon RV200 QW [Radeon 7500]
[drm:radeon_cp_init] *ERROR* radeon_cp_init called without lock held
[drm:drm_unlock] *ERROR* Process 3124 using kernel context 0
---
There are also the older problems to mention,
like an Oops in kprobes:
http://www.uwsg.iu.edu/hypermail/linux/kernel/0411.1/0895.html
(there is also a test-case)
and the memory corruption in smbfs:
http://marc.free.net.ph/message/20041027.000343.74f4a932.html
If either of these problems can be resolved,
I'd be very happy:)
My /proc/config.gz is attached, just in case.
On Sat, 2004-11-13 at 19:55 +0200, Martin Schlemmer wrote:
> On Thu, 2004-11-11 at 01:23 -0800, Andrew Morton wrote:
> > ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.10-rc1/2.6.10-rc1-mm5/
> >
> >
> > - Various updates to various things. Nothing really stands out.
> >
> > - Let me be the first to report this:
> >
> > *** Warning: "kgdb_irq" [drivers/serial/serial_core.ko] undefined!
> > *** Warning: "hotplug_path" [drivers/acpi/container.ko] undefined!
> >
> >
> >
>
> I want to imagine there is some reason why some threading apps will have
> issues? I have since rc1-mm4 issues with evolution - some threads do
> not seem to come out of sleep or get running time for some reason.
> Unfortunately I cannot find the thread again. Is there a patch I can
> apply/revert to get it to work for now?
>
I should note that if I killall -STOP and then killall -CONT all
evolution processes (evolution-data-server-1.0, evolution-alarm-notify
and evolution-2.0) it works again for a while. The issue happens pretty
quick after I start evo ...
Thanks,
--
Martin Schlemmer
"Martin Schlemmer [c]" <[email protected]> wrote:
>
> > I want to imagine there is some reason why some threading apps will have
> > issues? I have since rc1-mm4 issues with evolution - some threads do
> > not seem to come out of sleep or get running time for some reason.
> > Unfortunately I cannot find the thread again. Is there a patch I can
> > apply/revert to get it to work for now?
> >
>
> I should note that if I killall -STOP and then killall -CONT all
> evolution processes (evolution-data-server-1.0, evolution-alarm-notify
> and evolution-2.0) it works again for a while. The issue happens pretty
> quick after I start evo ...
Could you please try:
wget ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.10-rc1/2.6.10-rc1-mm5/broken-out/futex_wait-fix.patch
patch -R -p1 < futex_wait-fix.patch
the retest?
Stas Sergeev <[email protected]> wrote:
>
> Hi.
>
> Andrew Morton wrote:
> > ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.10-rc1/2.6.10-rc1-mm5/
> Here are the few new problems that
> I've got:
>
> 1. Local APIC stopped working. I know
> ...
> 2. Radeon DRM driver stopped working.
> ...
> like an Oops in kprobes:
> http://www.uwsg.iu.edu/hypermail/linux/kernel/0411.1/0895.html
OK, I've passed these over to people who might be able to fix them.
> (there is also a test-case)
> and the memory corruption in smbfs:
> http://marc.free.net.ph/message/20041027.000343.74f4a932.html
>
Here's a random hack for smbfs. Does it help?
diff -puN fs/smbfs/request.c~smbfs-hack fs/smbfs/request.c
--- 25/fs/smbfs/request.c~smbfs-hack 2004-11-13 13:36:28.158722944 -0800
+++ 25-akpm/fs/smbfs/request.c 2004-11-13 13:37:20.721732152 -0800
@@ -279,6 +279,7 @@ int smb_add_request(struct smb_request *
long timeleft;
struct smb_sb_info *server = req->rq_server;
int result = 0;
+ int need_put = 0;
smb_setup_request(req);
if (req->rq_trans2_command) {
@@ -343,7 +344,7 @@ int smb_add_request(struct smb_request *
smb_lock_server(server);
if (!(req->rq_flags & SMB_REQ_RECEIVED)) {
list_del_init(&req->rq_queue);
- smb_rput(req);
+ need_put = 1;
}
smb_unlock_server(server);
}
@@ -372,6 +373,8 @@ int smb_add_request(struct smb_request *
req->rq_errno = smb_errno(req);
if (signal_pending(current))
req->rq_errno = -ERESTARTSYS;
+ if (need_put)
+ smb_rput(req);
return req->rq_errno;
}
_
On Sun, 14 Nov 2004, Stas Sergeev wrote:
> Andrew Morton wrote:
> > ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.10-rc1/2.6.10-rc1-mm5/
> Here are the few new problems that
> I've got:
>
> 1. Local APIC stopped working. I know
> I have to add "lapic" to the command-line,
> but now this doesn't help (in -mm4 either
> I think). dmesg says:
> ---
> Kernel command line: ro root=/dev/hdc2 apm=power-off lapic nmi_watchdog=1
> ...
> Local APIC not detected. Using dummy APIC emulation.
> ---
> Is this known? Any other command-line option
> to enable it again?
Could you please apply the following patch and supply full dmesg?
Thanks.
Index: linux-2.6.10-rc1-mm5/arch/i386/kernel/apic.c
===================================================================
RCS file: /home/cvsroot/linux-2.6.10-rc1-mm5/arch/i386/kernel/apic.c,v
retrieving revision 1.1.1.1
diff -u -p -B -r1.1.1.1 apic.c
--- linux-2.6.10-rc1-mm5/arch/i386/kernel/apic.c 11 Nov 2004 17:24:27 -0000 1.1.1.1
+++ linux-2.6.10-rc1-mm5/arch/i386/kernel/apic.c 13 Nov 2004 22:12:39 -0000
@@ -733,8 +733,10 @@ static int __init detect_init_APIC (void
extern void get_cpu_vendor(struct cpuinfo_x86*);
/* Disabled by kernel option? */
- if (enable_local_apic < 0)
+ if (enable_local_apic < 0) {
+ printk("%s:%d\n", __FILE__, __LINE__);
return -1;
+ }
/* Workaround for us being called before identify_cpu(). */
get_cpu_vendor(&boot_cpu_data);
@@ -760,6 +762,7 @@ static int __init detect_init_APIC (void
* APIC only if "lapic" specified.
*/
if (enable_local_apic <= 0) {
+ printk("%s:%d\n", __FILE__, __LINE__);
apic_printk(APIC_VERBOSE,
"Local APIC disabled by BIOS -- "
"you can enable it with \"lapic\"\n");
On Sat, Nov 13, 2004 at 01:22:32PM -0800, Andrew Morton wrote:
> Could you please try:
>
> wget ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.10-rc1/2.6.10-rc1-mm5/broken-out/futex_wait-fix.patch
> patch -R -p1 < futex_wait-fix.patch
It seems that reverting this patch indeed fixes the Apache + NPTL issue.
On Sat, 2004-11-13 at 13:22 -0800, Andrew Morton wrote:
> "Martin Schlemmer [c]" <[email protected]> wrote:
> >
> > > I want to imagine there is some reason why some threading apps will have
> > > issues? I have since rc1-mm4 issues with evolution - some threads do
> > > not seem to come out of sleep or get running time for some reason.
> > > Unfortunately I cannot find the thread again. Is there a patch I can
> > > apply/revert to get it to work for now?
> > >
> >
> > I should note that if I killall -STOP and then killall -CONT all
> > evolution processes (evolution-data-server-1.0, evolution-alarm-notify
> > and evolution-2.0) it works again for a while. The issue happens pretty
> > quick after I start evo ...
>
> Could you please try:
>
> wget ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.10-rc1/2.6.10-rc1-mm5/broken-out/futex_wait-fix.patch
> patch -R -p1 < futex_wait-fix.patch
>
> the retest?
Yep, this seems to fix it (usually one thread at least have already hung
at start for evo, now fine after a few mail fetches).
Is this a regression, or as in the other thread an issue with evolution
that should be fixed ? (Note: gnome-btdownload also seemed to hang
overnight with -mm[45], but I do not know if its related)
Thanks,
--
Martin Schlemmer
Linux version 2.6.10-rc1-mm5-stsp1 (root@lin) (gcc version 3.4.0 (Red Hat Linux 3.4.0-1)) #2 SMP Sun Nov 14 01:35:31 MSK 2004
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000dc000 - 00000000000e0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
BIOS-e820: 000000001fff0000 - 000000001fff8000 (ACPI data)
BIOS-e820: 000000001fff8000 - 0000000020000000 (ACPI NVS)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
511MB LOWMEM available.
On node 0 totalpages: 131056
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 126960 pages, LIFO batch:16
HighMem zone: 0 pages, LIFO batch:1
DMI 2.3 present.
ACPI: RSDP (v000 AMI ) @ 0x000faf50
ACPI: RSDT (v001 AMIINT 0x00000010 MSFT 0x00000097) @ 0x1fff0000
ACPI: FADT (v001 AMIINT 0x00000010 MSFT 0x00000097) @ 0x1fff0030
ACPI: DSDT (v001 ASUS K7M 0x00001000 MSFT 0x0100000b) @ 0x00000000
Built 1 zonelists
arch/i386/kernel/apic.c:765
Initializing CPU#0
Kernel command line: ro root=/dev/hdc2 apm=power-off lapic nmi_watchdog=1
CPU 0 irqstacks, hard=c03ae000 soft=c03ac000
PID hash table entries: 2048 (order: 11, 32768 bytes)
Detected 704.943 MHz processor.
Using tsc for high-res timesource
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 515712k/524224k available (1784k kernel code, 8028k reserved, 746k data, 180k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay loop... 1388.54 BogoMIPS (lpj=694272)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU: After generic identify, caps: 0183f9ff c1c7f9ff 00000000 00000000
CPU: After vendor identify, caps: 0183f9ff c1c7f9ff 00000000 00000000
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 256K (64 bytes/line)
CPU: After all inits, caps: 0183f9ff c1c7f9ff 00000000 00000020
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Enabling fast FPU save and restore... done.
Checking 'hlt' instruction... OK.
CPU0: AMD Athlon(tm) Processor stepping 02
per-CPU timeslice cutoff: 731.96 usecs.
task migration cache decay timeout: 1 msecs.
SMP motherboard not detected.
Local APIC not detected. Using dummy APIC emulation.
Brought up 1 CPUs
CPU0:
domain 0: span 1
groups: 1
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xfd9e1, last bus=1
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
Linux Plug and Play Support v0.97 (c) Adam Belay
PnPBIOS: Scanning system for PnP BIOS support...
PnPBIOS: Found PnP BIOS installation structure at 0xc00f7a30
PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0x6944, dseg 0xf0000
PnPBIOS: Missing SMALL_TAG_ENDDEP tag
PnPBIOS: Missing SMALL_TAG_ENDDEP tag
PnPBIOS: Missing SMALL_TAG_ENDDEP tag
PnPBIOS: Missing SMALL_TAG_ENDDEP tag
PnPBIOS: 13 nodes reported by PnP BIOS; 13 recorded by driver
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
PCI: Using IRQ router VIA [1106/0686] at 0000:00:04.0
Machine check exception polling timer started.
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
audit: initializing netlink socket (disabled)
audit(1100396440.284:0): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Initializing Cryptographic API
PCI: Disabling Via external APIC routing
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Real Time Clock Driver v1.12
[drm] Initialized drm 1.0.0 20040925
Hangcheck: starting hangcheck timer 0.5.0 (tick is 180 seconds, margin is 60 seconds).
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing enabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
elevator: using anticipatory as default io scheduler
Floppy drive(s): fd0 is 1.44M, fd1 is 1.2M
FDC 0 is a post-1991 82077
divert: not allocating divert_blk for non-ethernet device lo
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller at PCI slot 0000:00:04.1
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
VP_IDE: VIA vt82c686a (rev 1b) IDE UDMA66 controller on pci0000:00:04.1
ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:DMA
Probing IDE interface ide0...
hda: FUJITSU MPG3409AT E, ATA DISK drive
hdb: FUJITSU MPE3102AT, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: Maxtor 6Y080L0, ATA DISK drive
hdd: CD-S500/A, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
Probing IDE interface ide2...
ide2: Wait for ready failed before probe !
Probing IDE interface ide3...
ide3: Wait for ready failed before probe !
Probing IDE interface ide4...
ide4: Wait for ready failed before probe !
Probing IDE interface ide5...
ide5: Wait for ready failed before probe !
hda: max request size: 128KiB
hda: 80063424 sectors (40992 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(66)
hda: cache flushes not supported
hda: hda1 hda2 hda3 < hda5 hda6 hda7 hda8 hda9 hda10 hda11 hda12 hda13 hda14 hda15 >
hdb: max request size: 128KiB
hdb: 20016348 sectors (10248 MB) w/512KiB Cache, CHS=19857/16/63
hdb: cache flushes not supported
hdb: hdb1 hdb2 hdb3 hdb4 < hdb5 hdb6 >
hdc: max request size: 128KiB
hdc: 160086528 sectors (81964 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(66)
hdc: cache flushes supported
hdc: hdc1 hdc2 hdc3 hdc4 < hdc5 hdc6 hdc7 hdc8 hdc9 hdc10 hdc11 hdc12 hdc13 hdc14 >
hdd: ATAPI 50X CD-ROM drive, 128kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard on isa0060/serio0
logibm.c: Didn't find Logitech busmouse at 0x23c
NET: Registered protocol family 2
IP: routing cache hash table of 2048 buckets, 32Kbytes
TCP: Hash tables configured (established 16384 bind 16384)
NET: Registered protocol family 1
NET: Registered protocol family 17
BIOS EDD facility v0.16 2004-Jun-25, 3 devices found
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 180k freed
kjournald starting. Commit interval 5 seconds
USB Universal Host Controller Interface driver v2.2
PCI: Found IRQ 10 for device 0000:00:04.2
PCI: Sharing IRQ 10 with 0000:00:04.3
PCI: Sharing IRQ 10 with 0000:00:10.0
uhci_hcd 0000:00:04.2: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
uhci_hcd 0000:00:04.2: irq 10, io base 0xd400
uhci_hcd 0000:00:04.2: new USB bus registered, assigned bus number 1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
PCI: Found IRQ 10 for device 0000:00:04.3
PCI: Sharing IRQ 10 with 0000:00:04.2
PCI: Sharing IRQ 10 with 0000:00:10.0
uhci_hcd 0000:00:04.3: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (#2)
uhci_hcd 0000:00:04.3: irq 10, io base 0xd800
uhci_hcd 0000:00:04.3: new USB bus registered, assigned bus number 2
usb 1-1: new low speed USB device using uhci_hcd and address 2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
usb 1-2: new full speed USB device using uhci_hcd and address 3
usbcore: registered new driver hiddev
input: USB HID v1.00 Mouse [1241:1111] on usb-0000:00:04.2-1
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
SCSI subsystem initialized
Initializing USB Mass Storage driver...
scsi0 : SCSI emulation for USB Mass Storage devices
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
usb-storage: device found at 3
usb-storage: waiting for device to settle before scanning
EXT3 FS on hdc2, internal journal
Adding 530104k swap on /dev/hda9. Priority:-1 extents:1
kjournald starting. Commit interval 5 seconds
EXT3 FS on hdc13, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on hdc11, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on hdc7, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on hdc8, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on hdc14, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
NTFS driver 2.1.22 [Flags: R/W MODULE].
NTFS volume version 3.1.
NTFS volume version 3.1.
Vendor: JetFlash Model: TS256MJF2A Rev: 1.00
Type: Direct-Access ANSI SCSI revision: 02
SCSI device sda: 512000 512-byte hdwr sectors (262 MB)
sda: Write Protect is off
sda: Mode Sense: 0b 00 00 08
sda: assuming drive cache: write through
sda: sda1
Attached scsi removable disk sda at scsi0, channel 0, id 0, lun 0
usb-storage: device scan complete
ip_tables: (C) 2000-2002 Netfilter core team
ne2k-pci.c:v1.03 9/22/2003 D. Becker/P. Gortmaker
http://www.scyld.com/network/ne2k-pci.html
PCI: Found IRQ 10 for device 0000:00:10.0
PCI: Sharing IRQ 10 with 0000:00:04.3
PCI: Sharing IRQ 10 with 0000:00:04.2
divert: allocating divert_blk for eth0
eth0: RealTek RTL-8029 found at 0xc800, IRQ 10, 00:C0:26:EF:74:E6.
FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
parport_pc: Unknown parameter `io'
parport_pc: Ignoring new-style parameters in presence of obsolete ones
parport_pc: VIA 686A/8231 detected
parport_pc: probing current configuration
parport_pc: Current parallel port base: 0x378
parport0: PC-style at 0x378 (0x778), irq 7, using FIFO [PCSPP,TRISTATE,COMPAT,ECP]
parport0: Legacy device
parport_pc: VIA parallel port: io=0x378, irq=7
lp0: using parport0 (interrupt-driven).
lp0: console ready
NET: Registered protocol family 10
Disabled Privacy Extensions on device c0346ee0(lo)
IPv6 over IPv4 tunneling driver
divert: not allocating divert_blk for non-ethernet device sit0
eth0: no IPv6 routers present
Linux agpgart interface v0.100 (c) Dave Jones
agpgart: Detected AMD Irongate chipset
agpgart: Maximum main memory to use for agp memory: 439M
agpgart: AGP aperture is 64M @ 0xe8000000
[drm] Initialized radeon 1.11.0 20020828 on minor 0: ATI Technologies Inc Radeon RV200 QW [Radeon 7500]
[drm:radeon_cp_init] *ERROR* radeon_cp_init called without lock held
[drm:drm_unlock] *ERROR* Process 2726 using kernel context 0
"Martin Schlemmer [c]" <[email protected]> wrote:
>
> > Could you please try:
> >
> > wget ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.10-rc1/2.6.10-rc1-mm5/broken-out/futex_wait-fix.patch
> > patch -R -p1 < futex_wait-fix.patch
> >
> > the retest?
>
> Yep, this seems to fix it (usually one thread at least have already hung
> at start for evo, now fine after a few mail fetches).
OK, thanks.
> Is this a regression, or as in the other thread an issue with evolution
> that should be fixed ? (Note: gnome-btdownload also seemed to hang
> overnight with -mm[45], but I do not know if its related)
Don't know. It's hard to see why that patch would cause gross misbehaviour
in evolution and apache. We may have to just revert it and take another
look at the problem which it fixes.
One thing I do note which is unrelated to this problem is that futex_wait()
does get_user() inside down_read(mmap_sem). But a fault will do a second
down_read(). And doing down_read() twice from within the same thread is a
bug, because an intervening down_write() from another thread will cause
deadlock.
On Sat, 2004-11-13 at 15:24 -0800, Andrew Morton wrote:
> "Martin Schlemmer [c]" <[email protected]> wrote:
> >
> > > Could you please try:
> > >
> > > wget ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.10-rc1/2.6.10-rc1-mm5/broken-out/futex_wait-fix.patch
> > > patch -R -p1 < futex_wait-fix.patch
> > >
> > > the retest?
> >
> > Yep, this seems to fix it (usually one thread at least have already hung
> > at start for evo, now fine after a few mail fetches).
>
> OK, thanks.
>
> > Is this a regression, or as in the other thread an issue with evolution
> > that should be fixed ? (Note: gnome-btdownload also seemed to hang
> > overnight with -mm[45], but I do not know if its related)
>
> Don't know. It's hard to see why that patch would cause gross misbehaviour
> in evolution and apache. We may have to just revert it and take another
> look at the problem which it fixes.
>
I will be honest that I know next to nothing about relevant code, but
this looks fishy:
------
@@ -486,6 +486,8 @@
if (unlikely(ret != 0))
goto out_release_sem;
- queue_me(&q, -1, NULL);
-
/*
* Access the page after the futex is queued.
* We hold the mmap semaphore, so the mapping cannot have changed
------
The 'queue_me(&q, -1, NULL);' gets moved down, but just below where it
was we have a comment before a get_user() ... it is not possible that
because the patch cause the get_user() to be before queue_me(), that
we can have two (or more?) get_user()'s for the same futex at relatively
the same time?
> One thing I do note which is unrelated to this problem is that futex_wait()
> does get_user() inside down_read(mmap_sem). But a fault will do a second
> down_read(). And doing down_read() twice from within the same thread is a
> bug, because an intervening down_write() from another thread will cause
> deadlock.
>
I will rather leave this to somebody that now something about this =)
Thanks,
--
Martin Schlemmer
Andrew Morton wrote:
> Don't know. It's hard to see why that patch would cause gross misbehaviour
> in evolution and apache. We may have to just revert it and take another
> look at the problem which it fixes.
I just realised I have posted an answer to this, under a different
subject, but forgot to use the right In-Reply-To so that it will
appear in this thread.
The subject is "Futex queue_me/get_user ordering", and the short
answer is that the patch is buggy and it does cause these problems.
-- Jamie
>
> 2. Radeon DRM driver stopped working.
> dmesg says:
> ---
> Linux agpgart interface v0.100 (c) Dave Jones
> agpgart: Detected AMD Irongate chipset
> agpgart: Maximum main memory to use for agp memory: 439M
> agpgart: AGP aperture is 64M @ 0xe8000000
> [drm] Initialized radeon 1.11.0 20020828 on minor 0: ATI Technologies Inc Radeon RV200 QW [Radeon 7500]
> [drm:radeon_cp_init] *ERROR* radeon_cp_init called without lock held
> [drm:drm_unlock] *ERROR* Process 3124 using kernel context 0
> ---
>
You are building AGP as a module with DRM as a built-in ,the DRM
cannot use the AGP if it is not built in also, I think the latest DRM
bk tree should enforce this I'm not sure if -mm5 has the patches in
it or not...
I'm going to add something in the DRM debug to state whether AGP is in
use or not ..
Dave.
On Sun, 14 Nov 2004 01:47:50 +0300, Stas Sergeev wrote:
>Zwane Mwaikambo wrote:
>>> 1. Local APIC stopped working. I know
>> Could you please apply the following patch and supply full dmesg?
>Done.
>Does this help?
...
>ACPI: DSDT (v001 ASUS K7M 0x00001000 MSFT 0x0100000b) @ 0x00000000
...
>Detected 704.943 MHz processor.
...
>CPU0: AMD Athlon(tm) Processor stepping 02
Please post the contents of /proc/cpuinfo. The age
of this system makes me suspect it may not actually
have a local APIC (the first K7 model didn't have one).
If a previous kernel successfully found the local APIC,
then please state which one and post its boot log.
(And please use nmi_watchdog=2 so we can confirm that
it's there and working.)
/Mikael
Linux version 2.6.8-rc1 (root@lin) (gcc version 3.4.0 (Red Hat Linux 3.4.0-1)) #6 SMP Sun Nov 14 16:04:21 MSK 2004
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000dc000 - 00000000000e0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
BIOS-e820: 000000001fff0000 - 000000001fff8000 (ACPI data)
BIOS-e820: 000000001fff8000 - 0000000020000000 (ACPI NVS)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
511MB LOWMEM available.
On node 0 totalpages: 131056
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 126960 pages, LIFO batch:16
HighMem zone: 0 pages, LIFO batch:1
DMI 2.3 present.
ACPI disabled because your bios is from 2000 and too old
You can enable it with acpi=force
Built 1 zonelists
Kernel command line: ro root=/dev/hdc2 apm=power-off lapic nmi_watchdog=2
Local APIC disabled by BIOS -- reenabling.
Found and enabled local APIC!
Initializing CPU#0
PID hash table entries: 2048 (order 11: 16384 bytes)
Detected 705.165 MHz processor.
Using tsc for high-res timesource
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 515000k/524224k available (2078k kernel code, 8464k reserved, 829k data, 172k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay loop... 1392.64 BogoMIPS
Security Scaffold v1.0.0 initialized
Capability LSM initialized
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU: After generic identify, caps: 0183fbff c1c7fbff 00000000 00000000
CPU: After vendor identify, caps: 0183fbff c1c7fbff 00000000 00000000
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 256K (64 bytes/line)
CPU: After all inits, caps: 0183fbff c1c7fbff 00000000 00000020
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Enabling fast FPU save and restore... done.
Checking 'hlt' instruction... OK.
CPU0: AMD Athlon(tm) Processor stepping 02
per-CPU timeslice cutoff: 730.92 usecs.
task migration cache decay timeout: 1 msecs.
SMP motherboard not detected.
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
testing NMI watchdog ... OK.
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 704.0786 MHz.
..... host bus clock speed is 201.0367 MHz.
Brought up 1 CPUs
CPU0: online
domain 0: span 1
groups: 1
spurious 8259A interrupt: IRQ7.
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xfd9e1, last bus=1
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20040326
ACPI: Interpreter disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
PnPBIOS: Scanning system for PnP BIOS support...
PnPBIOS: Found PnP BIOS installation structure at 0xc00f7a30
PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0x6944, dseg 0xf0000
PnPBIOS: 13 nodes reported by PnP BIOS; 13 recorded by driver
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
PCI: Using IRQ router VIA [1106/0686] at 0000:00:04.0
Machine check exception polling timer started.
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
audit: initializing netlink socket (disabled)
audit(1100448595.142:0): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Initializing Cryptographic API
PCI: Disabling Via external APIC routing
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Real Time Clock Driver v1.12
Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing enabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
Using anticipatory io scheduler
Floppy drive(s): fd0 is 1.44M, fd1 is 1.2M
FDC 0 is a post-1991 82077
divert: not allocating divert_blk for non-ethernet device lo
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller at PCI slot 0000:00:04.1
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
VP_IDE: VIA vt82c686a (rev 1b) IDE UDMA66 controller on pci0000:00:04.1
ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:DMA
hda: FUJITSU MPG3409AT E, ATA DISK drive
hdb: FUJITSU MPE3102AT, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hdc: Maxtor 6Y080L0, ATA DISK drive
hdd: CD-S500/A, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 128KiB
hda: 80063424 sectors (40992 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(66)
hda: hda1 hda2 hda3 < hda5 hda6 hda7 hda8 hda9 hda10 hda11 hda12 hda13 hda14 hda15 >
hdb: max request size: 128KiB
hdb: 20016348 sectors (10248 MB) w/512KiB Cache, CHS=19857/16/63
hdb: hdb1 hdb2 hdb3 hdb4 < hdb5 hdb6 >
hdc: max request size: 128KiB
hdc: 160086528 sectors (81964 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(66)
hdc: hdc1 hdc2 hdc3 hdc4 < hdc5 hdc6 hdc7 hdc8 hdc9 hdc10 hdc11 hdc12 hdc13 hdc14 >
hdd: ATAPI 50X CD-ROM drive, 128kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
mice: PS/2 mouse device common for all mice
logibm.c: Didn't find Logitech busmouse at 0x23c
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
input: AT Translated Set 2 keyboard on isa0060/serio0
NET: Registered protocol family 2
IP: routing cache hash table of 2048 buckets, 32Kbytes
TCP: Hash tables configured (established 16384 bind 21845)
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
BIOS EDD facility v0.16 2004-Jun-25, 3 devices found
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 172k freed
USB Universal Host Controller Interface driver v2.2
PCI: Found IRQ 10 for device 0000:00:04.2
PCI: Sharing IRQ 10 with 0000:00:04.3
PCI: Sharing IRQ 10 with 0000:00:10.0
uhci_hcd 0000:00:04.2: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
uhci_hcd 0000:00:04.2: irq 10, io base 0000d400
uhci_hcd 0000:00:04.2: new USB bus registered, assigned bus number 1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
PCI: Found IRQ 10 for device 0000:00:04.3
PCI: Sharing IRQ 10 with 0000:00:04.2
PCI: Sharing IRQ 10 with 0000:00:10.0
uhci_hcd 0000:00:04.3: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (#2)
uhci_hcd 0000:00:04.3: irq 10, io base 0000d800
uhci_hcd 0000:00:04.3: new USB bus registered, assigned bus number 2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
usb 1-1: new low speed USB device using address 2
usbcore: registered new driver hiddev
input: USB HID v1.00 Mouse [1241:1111] on usb-0000:00:04.2-1
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
usb 1-2: new full speed USB device using address 3
SCSI subsystem initialized
Initializing USB Mass Storage driver...
scsi0 : SCSI emulation for USB Mass Storage devices
Vendor: JetFlash Model: TS256MJF2A Rev: 1.00
Type: Direct-Access ANSI SCSI revision: 02
USB Mass Storage device found at 3
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
SCSI device sda: 512000 512-byte hdwr sectors (262 MB)
sda: assuming Write Enabled
sda: assuming drive cache: write through
sda: sda1
Attached scsi removable disk sda at scsi0, channel 0, id 0, lun 0
EXT3 FS on hdc2, internal journal
Adding 530104k swap on /dev/hda9. Priority:-1 extents:1
kjournald starting. Commit interval 5 seconds
EXT3 FS on hdc13, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on hdc11, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on hdc7, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on hdc8, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on hdc14, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
NTFS driver 2.1.15 [Flags: R/W MODULE].
NTFS-fs warning (device hdb1): ntfs_fill_super(): Atime updates are not implemented yet. Disabling them.
NTFS volume version 3.1.
NTFS-fs warning (device hda13): ntfs_fill_super(): Atime updates are not implemented yet. Disabling them.
NTFS volume version 3.1.
FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
ip_tables: (C) 2000-2002 Netfilter core team
ne2k-pci.c:v1.03 9/22/2003 D. Becker/P. Gortmaker
http://www.scyld.com/network/ne2k-pci.html
PCI: Found IRQ 10 for device 0000:00:10.0
PCI: Sharing IRQ 10 with 0000:00:04.3
PCI: Sharing IRQ 10 with 0000:00:04.2
divert: allocating divert_blk for eth0
eth0: RealTek RTL-8029 found at 0xc800, IRQ 10, 00:C0:26:EF:74:E6.
parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
parport0: Legacy device
lp0: using parport0 (interrupt-driven).
lp0: console ready
IN=eth0 OUT= MAC=00:c0:26:ef:74:e6:00:40:f4:70:07:19:08:00 SRC=192.168.2.114 DST=192.168.3.28 LEN=48 TOS=0x00 PREC=0x00 TTL=128 ID=48108 PROTO=TCP SPT=3378 DPT=139 WINDOW=64240 RES=0x00 SYN URGP=0
NET: Registered protocol family 10
Disabled Privacy Extensions on device c0390f40(lo)
IPv6 over IPv4 tunneling driver
divert: not allocating divert_blk for non-ethernet device sit0
eth0: no IPv6 routers present
Hi.
Dave Airlie wrote:
>> [drm:radeon_cp_init] *ERROR* radeon_cp_init called without lock held
>> [drm:drm_unlock] *ERROR* Process 3124 using kernel context 0
> You are building AGP as a module with DRM as a built-in ,the DRM
Yes. Building everything as module fixes
the problem. Thanks.
One of those rare cases where you take the
.config from the functional kernel of another
version, and it produces the non-functional one.
> cannot use the AGP if it is not built in also, I think the latest DRM
> bk tree should enforce this I'm not sure if -mm5 has the patches in
> it or not...
I bet it doesnt.
On Sun, 14 Nov 2004, Stas Sergeev wrote:
> 1. Local APIC stopped working. I know
> I have to add "lapic" to the command-line,
> but now this doesn't help (in -mm4 either
> I think). dmesg says:
Here's a fix. The problem is detect_init_APIC() is called early, before
the command line have been processed. Therefore "lapic" (and "nolapic")
have not been seen, yet.
This has been verified to work correctly with your configuration.
Andrew, please apply.
Maciej
Signed-off-by: Maciej W. Rozycki <[email protected]>
patch-2.6.10-rc1-mm5-i386-lapic-0
diff -up --recursive --new-file linux-2.6.10-rc1-mm5.macro/arch/i386/kernel/apic.c linux-2.6.10-rc1-mm5/arch/i386/kernel/apic.c
--- linux-2.6.10-rc1-mm5.macro/arch/i386/kernel/apic.c 2004-11-14 16:01:48.000000000 +0000
+++ linux-2.6.10-rc1-mm5/arch/i386/kernel/apic.c 2004-11-15 00:41:02.000000000 +0000
@@ -41,6 +41,11 @@
#include "io_ports.h"
/*
+ * Knob to control our willingness to enable the local APIC.
+ */
+int enable_local_apic __initdata = 0; /* -1=force-disable, +1=force-enable */
+
+/*
* Debug level
*/
int apic_verbosity;
@@ -692,26 +697,6 @@ static void apic_pm_activate(void) { }
* Original code written by Keir Fraser.
*/
-/*
- * Knob to control our willingness to enable the local APIC.
- */
-int enable_local_apic __initdata = 0; /* -1=force-disable, +1=force-enable */
-
-static int __init lapic_disable(char *str)
-{
- enable_local_apic = -1;
- clear_bit(X86_FEATURE_APIC, boot_cpu_data.x86_capability);
- return 0;
-}
-__setup("nolapic", lapic_disable);
-
-static int __init lapic_enable(char *str)
-{
- enable_local_apic = 1;
- return 0;
-}
-__setup("lapic", lapic_enable);
-
static int __init apic_set_verbosity(char *str)
{
if (strcmp("debug", str) == 0)
diff -up --recursive --new-file linux-2.6.10-rc1-mm5.macro/arch/i386/kernel/setup.c linux-2.6.10-rc1-mm5/arch/i386/kernel/setup.c
--- linux-2.6.10-rc1-mm5.macro/arch/i386/kernel/setup.c 2004-11-14 16:01:49.000000000 +0000
+++ linux-2.6.10-rc1-mm5/arch/i386/kernel/setup.c 2004-11-15 00:10:26.000000000 +0000
@@ -40,6 +40,7 @@
#include <linux/init.h>
#include <linux/edd.h>
#include <video/edid.h>
+#include <asm/apic.h>
#include <asm/e820.h>
#include <asm/mpspec.h>
#include <asm/setup.h>
@@ -814,6 +815,16 @@ static void __init parse_cmdline_early (
#endif /* CONFIG_X86_LOCAL_APIC */
#endif /* CONFIG_ACPI_BOOT */
+#ifdef CONFIG_X86_LOCAL_APIC
+ /* enable local APIC */
+ else if (!memcmp(from, "lapic", 5))
+ lapic_enable();
+
+ /* disable local APIC */
+ else if (!memcmp(from, "nolapic", 6))
+ lapic_disable();
+#endif /* CONFIG_X86_LOCAL_APIC */
+
/*
* highmem=size forces highmem to be exactly 'size' bytes.
* This works even on boxes that have no highmem otherwise.
diff -up --recursive --new-file linux-2.6.10-rc1-mm5.macro/include/asm-i386/apic.h linux-2.6.10-rc1-mm5/include/asm-i386/apic.h
--- linux-2.6.10-rc1-mm5.macro/include/asm-i386/apic.h 2004-11-14 16:02:45.000000000 +0000
+++ linux-2.6.10-rc1-mm5/include/asm-i386/apic.h 2004-11-15 00:09:31.000000000 +0000
@@ -5,6 +5,7 @@
#include <linux/pm.h>
#include <asm/fixmap.h>
#include <asm/apicdef.h>
+#include <asm/processor.h>
#include <asm/system.h>
#define Dprintk(x...)
@@ -16,8 +17,20 @@
#define APIC_VERBOSE 1
#define APIC_DEBUG 2
+extern int enable_local_apic;
extern int apic_verbosity;
+static inline void lapic_disable(void)
+{
+ enable_local_apic = -1;
+ clear_bit(X86_FEATURE_APIC, boot_cpu_data.x86_capability);
+}
+
+static inline void lapic_enable(void)
+{
+ enable_local_apic = 1;
+}
+
/*
* Define the default level of output to be very little
* This can be turned up by using apic=verbose for more
On Sun, 14 Nov 2004, Stas Sergeev wrote:
> Zwane Mwaikambo wrote:
> > > 1. Local APIC stopped working. I know
> > Could you please apply the following patch and supply full dmesg?
> Done.
> Does this help?
Yep it does help, we setup the Local APIC earlier than the parameter
parsing code. Please test the following;
Thanks,
Zwane
Index: linux-2.6.10-rc1-mm5/init/main.c
===================================================================
RCS file: /home/cvsroot/linux-2.6.10-rc1-mm5/init/main.c,v
retrieving revision 1.1.1.1
diff -u -p -B -r1.1.1.1 main.c
--- linux-2.6.10-rc1-mm5/init/main.c 11 Nov 2004 17:21:39 -0000 1.1.1.1
+++ linux-2.6.10-rc1-mm5/init/main.c 15 Nov 2004 00:58:57 -0000
@@ -453,12 +453,12 @@ asmlinkage void __init start_kernel(void
preempt_disable();
build_all_zonelists();
page_alloc_init();
- trap_init();
printk("Kernel command line: %s\n", saved_command_line);
parse_early_param();
parse_args("Booting kernel", command_line, __start___param,
__stop___param - __start___param,
&unknown_bootoption);
+ trap_init();
sort_main_extable();
rcu_init();
init_IRQ();
On Sun, 14 Nov 2004, Zwane Mwaikambo wrote:
> @@ -453,12 +453,12 @@ asmlinkage void __init start_kernel(void
> preempt_disable();
> build_all_zonelists();
> page_alloc_init();
> - trap_init();
> printk("Kernel command line: %s\n", saved_command_line);
> parse_early_param();
> parse_args("Booting kernel", command_line, __start___param,
> __stop___param - __start___param,
> &unknown_bootoption);
> + trap_init();
> sort_main_extable();
> rcu_init();
> init_IRQ();
Are you sure you want to make exception handling not to be set up as soon
as possible? Please note this also includes stuff in cpu_init().
Maciej
On Mon, 15 Nov 2004, Maciej W. Rozycki wrote:
> On Sun, 14 Nov 2004, Zwane Mwaikambo wrote:
>
> > @@ -453,12 +453,12 @@ asmlinkage void __init start_kernel(void
> > preempt_disable();
> > build_all_zonelists();
> > page_alloc_init();
> > - trap_init();
> > printk("Kernel command line: %s\n", saved_command_line);
> > parse_early_param();
> > parse_args("Booting kernel", command_line, __start___param,
> > __stop___param - __start___param,
> > &unknown_bootoption);
> > + trap_init();
> > sort_main_extable();
> > rcu_init();
> > init_IRQ();
>
> Are you sure you want to make exception handling not to be set up as soon
> as possible? Please note this also includes stuff in cpu_init().
As long as we don't end up having to shuffle around more stuff so that
parameters take effect. Anyway, i prefer your patch, this was a testing
hack.
Thanks,
Zwane
Hi.
Maciej W. Rozycki wrote:
> This has been verified to work correctly with your configuration.
Thanks, it works indeed.
But there is still something strange.
Previously, in 2.6.10-rc1 (and in -mm2
either I think) the NMI watchdog was
working in both LAPIC and IO-APIC modes.
Now - only in LAPIC mode.
nmi_watchdog=1 still doesn't work.
Any ideas about this?
Just trying to make sure that everything
is correct.
And btw, dmesg is still silent about a
LAPIC. This makes me nervous when I am
trying to figure out whether it works or
not:) Would be nice to get those prominent
messages back, as per 2.6.8.
Nov 15 15:23:31 stas kernel: Unable to handle kernel paging request at virtual address 6b6b6b6b
Nov 15 15:23:31 stas kernel: printing eip:
Nov 15 15:23:31 stas kernel: c011d4d7
Nov 15 15:23:31 stas kernel: *pde = 00000000
Nov 15 15:23:31 stas kernel: Oops: 0000 [#1]
Nov 15 15:23:31 stas kernel: PREEMPT SMP
Nov 15 15:23:31 stas kernel: Modules linked in: snd_mixer_oss snd_cmipci snd_pcm snd_page_alloc snd_opl3_lib snd_timer snd_hwdep snd_mpu401_uart snd_rawmidi snd_seq_device snd soundcore intel_agp agpgart md5 ipv6 smbfs 3c59x mii sd_mod ntfs nls_cp866 usb_storage scsi_mod uhci_hcd usbcore video thinkpad_acpi
Nov 15 15:23:31 stas kernel: CPU: 0
Nov 15 15:23:31 stas kernel: EIP: 0060:[<c011d4d7>] Not tainted VLI
Nov 15 15:23:31 stas kernel: EFLAGS: 00010897 (2.6.10-rc1-mm5)
Nov 15 15:23:31 stas kernel: EIP is at __wake_up_common+0x17/0x70
Nov 15 15:23:31 stas kernel: eax: d1007efc ebx: d1007ef0 ecx: 00000001 edx: 6b6b6b6b
Nov 15 15:23:31 stas kernel: esi: 00000000 edi: 00000001 ebp: de9caf44 esp: de9caf28
Nov 15 15:23:31 stas kernel: ds: 007b es: 007b ss: 0068
Nov 15 15:23:31 stas kernel: Process smbiod (pid: 2567, threadinfo=de9ca000 task=deab5550)
Nov 15 15:23:31 stas kernel: Stack: c014c65f 00000000 00000001 00000001 d1007ef0 00000000 00000001 de9caf68
Nov 15 15:23:31 stas kernel: c011d568 00000000 00000000 00000286 00000001 deabcd74 d1007ee4 00000000
Nov 15 15:23:31 stas kernel: de9caf80 e0920d35 00000000 00000000 deabcd74 00000007 de9caf94 e091fc97
Nov 15 15:23:31 stas kernel: Call Trace:
Nov 15 15:23:31 stas kernel: [<c010600a>] show_stack+0x7a/0x90
Nov 15 15:23:31 stas kernel: [<c0106196>] show_registers+0x156/0x1c0
Nov 15 15:23:31 stas kernel: [<c01063a4>] die+0xf4/0x180
Nov 15 15:23:31 stas kernel: [<c0119c9a>] do_page_fault+0x36a/0x69f
Nov 15 15:23:31 stas kernel: [<c0105c8f>] error_code+0x2b/0x30
Nov 15 15:23:31 stas kernel: [<c011d568>] __wake_up+0x38/0x50
Nov 15 15:23:31 stas kernel: [<e0920d35>] smb_request_recv+0x115/0x1ed [smbfs]
Nov 15 15:23:31 stas kernel: [<e091fc97>] smbiod_doio+0x27/0xa0 [smbfs]
Nov 15 15:23:31 stas kernel: [<e091fe4b>] smbiod+0x13b/0x178 [smbfs]
Nov 15 15:23:31 stas kernel: [<c01032e5>] kernel_thread_helper+0x5/0x10
Nov 15 15:23:31 stas kernel: Code: c0 eb d2 90 55 89 e5 8b 40 04 5d e9 84 e3 ff ff 8d 74 26 00 55 89 e5 57 56 53 83 ec 10 89 55 f0 89 4d ec 8b 50 0c 83 c0 0c 39 c2 <8b> 3a 89 45 e8 74 3b 89 f6 8b 45 0c 8d 5a f4 8b 72 f4 8b 4d 08
Nov 15 15:23:31 stas kernel: <3>Debug: sleeping function called from invalid context at include/linux/rwsem.h:43
Nov 15 15:23:31 stas kernel: in_atomic():1, irqs_disabled():0
Nov 15 15:23:31 stas kernel: [<c0106037>] dump_stack+0x17/0x20
Nov 15 15:23:31 stas kernel: [<c011f102>] __might_sleep+0xa2/0xb0
Nov 15 15:23:31 stas kernel: [<c0122c73>] profile_task_exit+0x23/0x60
Nov 15 15:23:31 stas kernel: [<c0124d3c>] do_exit+0x1c/0x580
Nov 15 15:23:32 stas kernel: [<c0106428>] die+0x178/0x180
Nov 15 15:23:32 stas kernel: [<c0119c9a>] do_page_fault+0x36a/0x69f
Nov 15 15:23:32 stas kernel: [<c0105c8f>] error_code+0x2b/0x30
Nov 15 15:23:32 stas kernel: [<c011d568>] __wake_up+0x38/0x50
Nov 15 15:23:32 stas kernel: [<e0920d35>] smb_request_recv+0x115/0x1ed [smbfs]
Nov 15 15:23:32 stas kernel: [<e091fc97>] smbiod_doio+0x27/0xa0 [smbfs]
Nov 15 15:23:32 stas kernel: [<e091fe4b>] smbiod+0x13b/0x178 [smbfs]
Nov 15 15:23:32 stas kernel: [<c01032e5>] kernel_thread_helper+0x5/0x10
Nov 15 15:23:32 stas kernel: note: smbiod[2567] exited with preempt_count 1
Nov 15 15:23:38 stas kernel: Slab corruption: start=d1007ee4, len=256
Nov 15 15:23:38 stas kernel: Redzone: 0x5a2cf071/0x5a2cf071.
Nov 15 15:23:38 stas kernel: Last user: [<e0920d1c>](smb_request_recv+0xfc/0x1ed [smbfs])
Nov 15 15:23:38 stas kernel: 000: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 00 6b 6b 6b
Nov 15 15:23:38 stas kernel: Prev obj: start=d1007dd8, len=256
Nov 15 15:23:38 stas kernel: Redzone: 0x5a2cf071/0x5a2cf071.
Nov 15 15:23:38 stas kernel: Last user: [<00000000>](0x0)
Nov 15 15:23:38 stas kernel: 000: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b
Nov 15 15:23:38 stas kernel: 010: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b
On Mon, 15 Nov 2004, Stas Sergeev wrote:
> But there is still something strange.
> Previously, in 2.6.10-rc1 (and in -mm2
> either I think) the NMI watchdog was
> working in both LAPIC and IO-APIC modes.
> Now - only in LAPIC mode.
> nmi_watchdog=1 still doesn't work.
> Any ideas about this?
Interesting -- your local APIC seems to be disabled by the firmware
(otherwise it would work even without my fix), so how can an I/O APIC
work? Bringing it up requires a set of tables in memory describing its
configuration to have been prepared by the firmware by means of either the
MPS or the ACPI standard. Disabling the local APIC likely implies no
explicit support for APICs is present in the firmware, so such tables
should be absent.
> Just trying to make sure that everything
> is correct.
With no APIC messages at all it's hard to decide whether it's correct or
not.
> And btw, dmesg is still silent about a
> LAPIC. This makes me nervous when I am
> trying to figure out whether it works or
> not:) Would be nice to get those prominent
> messages back, as per 2.6.8.
Someone wasn't as much fond of them as you are and they were removed by
default. I'm pissed off, too, but my opinion doesn't matter -- others
seem to have better skills with their crystal balls. Please try "debug
apic=debug" on your command line together with the following patch (the
"apic=" parameter suffers from the same problem "lapic" and "nolapic"
do, but IMO it would be an overkill to move it to parse_cmdline_early()).
If you send me the bootstrap log back I may have a look to see what's
wrong about the I/O APIC.
Maciej
patch-2.6.10-rc1-mm5-i386-apic_printk-0
diff -up --recursive --new-file linux-2.6.10-rc1-mm5.macro/arch/i386/kernel/apic.c linux-2.6.10-rc1-mm5/arch/i386/kernel/apic.c
--- linux-2.6.10-rc1-mm5.macro/arch/i386/kernel/apic.c 2004-11-14 16:01:48.000000000 +0000
+++ linux-2.6.10-rc1-mm5/arch/i386/kernel/apic.c 2004-11-15 00:55:22.000000000 +0000
@@ -760,9 +760,8 @@ static int __init detect_init_APIC (void
* APIC only if "lapic" specified.
*/
if (enable_local_apic <= 0) {
- apic_printk(APIC_VERBOSE,
- "Local APIC disabled by BIOS -- "
- "you can enable it with \"lapic\"\n");
+ printk("Local APIC disabled by BIOS -- "
+ "you can enable it with \"lapic\"\n");
return -1;
}
/*
@@ -773,8 +772,7 @@ static int __init detect_init_APIC (void
*/
rdmsr(MSR_IA32_APICBASE, l, h);
if (!(l & MSR_IA32_APICBASE_ENABLE)) {
- apic_printk(APIC_VERBOSE, "Local APIC disabled "
- "by BIOS -- reenabling.\n");
+ printk("Local APIC disabled by BIOS -- reenabling.\n");
l &= ~MSR_IA32_APICBASE_BASE;
l |= MSR_IA32_APICBASE_ENABLE | APIC_DEFAULT_PHYS_BASE;
wrmsr(MSR_IA32_APICBASE, l, h);
@@ -801,7 +799,7 @@ static int __init detect_init_APIC (void
if (nmi_watchdog != NMI_NONE)
nmi_watchdog = NMI_LOCAL_APIC;
- apic_printk(APIC_VERBOSE, "Found and enabled local APIC!\n");
+ printk("Found and enabled local APIC!\n");
apic_pm_activate();
@@ -828,8 +826,8 @@ void __init init_apic_mappings(void)
apic_phys = mp_lapic_addr;
set_fixmap_nocache(FIX_APIC_BASE, apic_phys);
- apic_printk(APIC_DEBUG, "mapped APIC to %08lx (%08lx)\n", APIC_BASE,
- apic_phys);
+ printk(KERN_DEBUG "mapped APIC to %08lx (%08lx)\n", APIC_BASE,
+ apic_phys);
/*
* Fetch the APIC ID of the BSP in case we have a
@@ -847,21 +845,23 @@ void __init init_apic_mappings(void)
if (smp_found_config) {
ioapic_phys = mp_ioapics[i].mpc_apicaddr;
if (!ioapic_phys) {
- printk(KERN_ERR "WARNING: bogus zero IO-APIC address found in MPTABLE, disabling IO/APIC support!\n");
-
+ printk(KERN_ERR
+ "WARNING: bogus zero IO-APIC "
+ "address found in MPTABLE, "
+ "disabling IO/APIC support!\n");
smp_found_config = 0;
skip_ioapic_setup = 1;
goto fake_ioapic_page;
}
} else {
fake_ioapic_page:
- ioapic_phys = (unsigned long) alloc_bootmem_pages(PAGE_SIZE);
+ ioapic_phys = (unsigned long)
+ alloc_bootmem_pages(PAGE_SIZE);
ioapic_phys = __pa(ioapic_phys);
}
set_fixmap_nocache(idx, ioapic_phys);
- apic_printk(APIC_DEBUG, "mapped IOAPIC to "
- "%08lx (%08lx)\n",
- __fix_to_virt(idx), ioapic_phys);
+ printk(KERN_DEBUG "mapped IOAPIC to %08lx (%08lx)\n",
+ __fix_to_virt(idx), ioapic_phys);
idx++;
}
}
"Maciej W. Rozycki" <[email protected]> wrote:
>
> And btw, dmesg is still silent about a
> > LAPIC. This makes me nervous when I am
> > trying to figure out whether it works or
> > not:) Would be nice to get those prominent
> > messages back, as per 2.6.8.
>
> Someone wasn't as much fond of them as you are and they were removed by
> default. I'm pissed off, too
Don't be pissed off - please send a patch which puts in whatever debugging
you think we need to have to be able to properly support the APIC code.
Stuff happens.
On Mon, 15 Nov 2004, Andrew Morton wrote:
> Don't be pissed off - please send a patch which puts in whatever debugging
> you think we need to have to be able to properly support the APIC code.
OK, I'll have a look at it. Lots of these messages are real crap and
hardly useful anymore now that the code works pretty well, but some bits
that are more dependent on hardware quirks rather than code quality are
still worth being output unconditionally at some reasonable loglevel.
Maciej
Linux version 2.6.10-rc1 (root@stas) (gcc version 3.3.3 20040412 (Red Hat Linux 3.3.3-7)) #1 SMP Thu Nov 4 09:39:47 MSK 2004
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
BIOS-e820: 000000001fff0000 - 000000001fff3000 (ACPI NVS)
BIOS-e820: 000000001fff3000 - 0000000020000000 (ACPI data)
BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
511MB LOWMEM available.
On node 0 totalpages: 131056
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 126960 pages, LIFO batch:16
HighMem zone: 0 pages, LIFO batch:1
DMI 2.3 present.
ACPI: RSDP (v000 IntelR ) @ 0x000f75d0
ACPI: RSDT (v001 IntelR AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1fff3000
ACPI: FADT (v001 IntelR AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1fff3040
ACPI: DSDT (v001 INTELR AWRDACPI 0x00001000 MSFT 0x0100000c) @ 0x00000000
ACPI: PM-Timer IO Port: 0x4008
Built 1 zonelists
Kernel command line: ro root=/dev/hda12 lapic nmi_watchdog=1 debug apic=debug
Local APIC disabled by BIOS -- reenabling.
Found and enabled local APIC!
mapped APIC to ffffd000 (fee00000)
Initializing CPU#0
CPU 0 irqstacks, hard=c040d000 soft=c040b000
PID hash table entries: 2048 (order: 11, 32768 bytes)
Detected 1133.740 MHz processor.
Using pmtmr for high-res timesource
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 515152k/524224k available (2061k kernel code, 8472k reserved, 830k data, 200k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay loop... 2244.60 BogoMIPS (lpj=1122304)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU: After generic identify, caps: 0383fbff 00000000 00000000 00000000
CPU: After vendor identify, caps: 0383fbff 00000000 00000000 00000000
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 256K
CPU: After all inits, caps: 0383fbff 00000000 00000000 00000040
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
ACPI: IRQ9 SCI: Level Trigger.
CPU0: Intel(R) Pentium(R) III CPU 1133MHz stepping 01
per-CPU timeslice cutoff: 731.79 usecs.
task migration cache decay timeout: 1 msecs.
SMP motherboard not detected.
Getting VERSION: 40011
Getting VERSION: 40011
Getting ID: 0
Getting LVT0: 700
Getting LVT1: 400
enabled ExtINT on CPU#0
testing NMI watchdog ... OK.
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 1133.0175 MHz.
..... host bus clock speed is 133.0314 MHz.
Brought up 1 CPUs
CPU0:
domain 0: span 1
groups: 1
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xfafc0, last bus=2
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20040816
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11 12 14 15) *9
Linux Plug and Play Support v0.97 (c) Adam Belay
PnPBIOS: Scanning system for PnP BIOS support...
PnPBIOS: Found PnP BIOS installation structure at 0xc00fb9a0
PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0xb9d0, dseg 0xf0000
PnPBIOS: 16 nodes reported by PnP BIOS; 16 recorded by driver
SCSI subsystem initialized
PCI: Using ACPI for IRQ routing
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
ACPI: PCI interrupt 0000:00:1f.2[D] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
ACPI: PCI interrupt 0000:00:1f.3[B] -> GSI 10 (level, low) -> IRQ 10
ACPI: PCI Interrupt Link [LNK1] enabled at IRQ 11
ACPI: PCI interrupt 0000:00:1f.4[C] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
ACPI: PCI interrupt 0000:01:00.0[A] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI interrupt 0000:02:00.0[A] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI interrupt 0000:02:00.1[A] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 10
ACPI: PCI interrupt 0000:02:02.0[A] -> GSI 10 (level, low) -> IRQ 10
ACPI: PCI interrupt 0000:02:04.0[A] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 5
ACPI: PCI interrupt 0000:02:09.0[A] -> GSI 5 (level, low) -> IRQ 5
Machine check exception polling timer started.
apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
apm: overridden by ACPI.
audit: initializing netlink socket (disabled)
audit(1100624518.455:0): initialized
Total HugeTLB memory allocated, 0
Initializing Cryptographic API
ACPI: Power Button (FF) [PWRF]
ACPI: Sleep Button (CM) [SLPB]
ACPI: Fan [FAN] (on)
ACPI: Processor [CPU0] (supports C1 C2, 2 throttling states)
ACPI: Thermal Zone [THRM] (34 C)
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
lp: driver loaded but no devices found
Real Time Clock Driver v1.12
Hangcheck: starting hangcheck timer 0.5.0 (tick is 180 seconds, margin is 60 seconds).
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
ACPI: PCI interrupt 0000:02:00.0[A] -> GSI 11 (level, low) -> IRQ 11
ttyS4: detected caps 00000700 should be 00000100
ttyS4 at I/O 0xa000 (irq = 11) is a 16C950/954
ttyS5: detected caps 00000700 should be 00000100
ttyS5 at I/O 0xa400 (irq = 11) is a 16C950/954
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
parport: PnPBIOS parport detected.
parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
lp0: using parport0 (interrupt-driven).
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
elevator: using anticipatory as default io scheduler
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
loop: loaded (max 8 devices)
nbd: registered device at major 43
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH2: IDE controller at PCI slot 0000:00:1f.1
ICH2: chipset revision 17
ICH2: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:pio
Probing IDE interface ide0...
hda: MAXTOR 6L040J2, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: ASUS CD-S500/A, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
Probing IDE interface ide2...
ide2: Wait for ready failed before probe !
Probing IDE interface ide3...
ide3: Wait for ready failed before probe !
Probing IDE interface ide4...
ide4: Wait for ready failed before probe !
Probing IDE interface ide5...
ide5: Wait for ready failed before probe !
hda: max request size: 128KiB
hda: 78177792 sectors (40027 MB) w/1819KiB Cache, CHS=65535/16/63, UDMA(100)
hda: cache flushes supported
hda: hda1 hda2 hda3 hda4 < hda5 hda6 hda7 hda8 hda9 hda10 hda11 hda12 hda13 hda14 hda15 >
hdc: ATAPI 50X CD-ROM drive, 128kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
libata version 1.02 loaded.
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard on isa0060/serio0
input: ImPS/2 Generic Wheel Mouse on isa0060/serio1
NET: Registered protocol family 2
IP: routing cache hash table of 2048 buckets, 32Kbytes
TCP: Hash tables configured (established 16384 bind 21845)
ip_conntrack version 2.1 (4095 buckets, 32760 max) - 308 bytes per conntrack
ip_tables: (C) 2000-2002 Netfilter core team
ipt_recent v0.3.1: Stephen Frost <[email protected]>. http://snowman.net/projects/ipt_recent/
arp_tables: (C) 2002 David S. Miller
NET: Registered protocol family 1
NET: Registered protocol family 17
ACPI: (supports S0 S1 S4 S5)
ACPI wakeup devices:
SLPB PCI0 HUB0 USB0 USB1 UAR1 UAR2
BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 200k freed
kjournald starting. Commit interval 5 seconds
usbcore: registered new driver usbfs
usbcore: registered new driver hub
USB Universal Host Controller Interface driver v2.2
ACPI: PCI interrupt 0000:00:1f.2[D] -> GSI 11 (level, low) -> IRQ 11
uhci_hcd 0000:00:1f.2: Intel Corp. 82801BA/BAM USB (Hub #1)
PCI: Setting latency timer of device 0000:00:1f.2 to 64
uhci_hcd 0000:00:1f.2: irq 11, io base 0xd000
uhci_hcd 0000:00:1f.2: new USB bus registered, assigned bus number 1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ACPI: PCI interrupt 0000:00:1f.4[C] -> GSI 11 (level, low) -> IRQ 11
uhci_hcd 0000:00:1f.4: Intel Corp. 82801BA/BAM USB (Hub #2)
PCI: Setting latency timer of device 0000:00:1f.4 to 64
uhci_hcd 0000:00:1f.4: irq 11, io base 0xd400
uhci_hcd 0000:00:1f.4: new USB bus registered, assigned bus number 2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
usb 1-1: new full speed USB device using address 2
Initializing USB Mass Storage driver...
scsi0 : SCSI emulation for USB Mass Storage devices
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
usb-storage: device found at 2
usb-storage: waiting for device to settle before scanning
EXT3 FS on hda12, internal journal
Adding 530104k swap on /dev/hda5. Priority:-1 extents:1
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda6, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda14, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda3, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda11, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda7, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda10, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda13, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda9, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
NTFS driver 2.1.21 [Flags: R/W MODULE].
NTFS volume version 3.1.
NTFS-fs error (device hda2): load_system_files(): Volume is dirty. Mounting read-only. Run chkdsk and mount in Windows.
Vendor: JetFlash Model: TS256MJF2A Rev: 1.00
Type: Direct-Access ANSI SCSI revision: 02
usb-storage: device scan complete
ACPI: PCI interrupt 0000:02:04.0[A] -> GSI 11 (level, low) -> IRQ 11
3c59x: Donald Becker and others. http://www.scyld.com/network/vortex.html
0000:02:04.0: 3Com PCI 3c905C Tornado at 0xc000. Vers LK1.1.19
SCSI device sda: 512000 512-byte hdwr sectors (262 MB)
sda: Write Protect is off
sda: Mode Sense: 0b 00 00 08
sda: assuming drive cache: write through
sda: sda1
Attached scsi removable disk sda at scsi0, channel 0, id 0, lun 0
NET: Registered protocol family 10
Disabled Privacy Extensions on device c039c000(lo)
IPv6 over IPv4 tunneling driver
eth0: no IPv6 routers present
On Tue, 16 Nov 2004, Stas Sergeev wrote:
> I don't think it worked. I do not even
> claim there is still some bug to that.
> But I know that nmi_watchdog=1 worked -
> thats for sure. I think there was some
> fallback, which is now either broken or
Indeed there was and it still is there, namely the following code:
if (nmi_watchdog != NMI_NONE)
nmi_watchdog = NMI_LOCAL_APIC;
in detect_init_APIC().
> disabled intentionally, and that's what
> I wanted to find out to make sure that
> everything works as expected.
Thanks for your insistence -- it helps. We probably want to rewrite the
fallback differently.
> I applied your patch and here are 2 logs -
> one from older kernel, one with -mm5 with
> patch. Both have nmi_watchdog=1, but the
> NMI works only with the old one.
> Does this shed some light?
Thanks -- they prove you have no I/O APIC and the quoted fallback should
indeed be in effect.
Maciej
Hi.
Maciej W. Rozycki wrote:
>> thats for sure. I think there was some
>> fallback, which is now either broken or
> Indeed there was and it still is there, namely the following code:
OK.
Another thing I am wondering about,
is why the lapic produces the NMI on
my Athlon so slowly. It is something
like 1 NMI in 20 seconds or so. And
it looks like the frequency changes
from one boot to another.
It didn't work properly with any kernel,
so maybe the lapic itself is buggy,
but maybe this is a kernel's bug that
can be debugged out somehow? Or is
there anywhere something that allows
me to specify the frequency? The rate
I currently have, is really pretty
much useless for anything.
On Thu, 18 Nov 2004, Stas Sergeev wrote:
> Another thing I am wondering about,
> is why the lapic produces the NMI on
> my Athlon so slowly. It is something
> like 1 NMI in 20 seconds or so. And
> it looks like the frequency changes
> from one boot to another.
The local APIC NMI watchdog, lacking a better source, uses the "cycles
unhalted" event. As you may guess it doesn't tick when the CPU is in the
halted state (which happens when the system is idle) and thus the NMI
counter's progress depends on the system's activity. Thy running
something CPU-intensive, like:
int main(void)
{
while (1);
return 0;
}
and observe the NMI counter ticking every second.
> It didn't work properly with any kernel,
> so maybe the lapic itself is buggy,
> but maybe this is a kernel's bug that
> can be debugged out somehow? Or is
> there anywhere something that allows
> me to specify the frequency? The rate
> I currently have, is really pretty
> much useless for anything.
Don't worry -- if your system locks up on anything but the "hlt"
processor instruction, the watchdog will trigger very soon as the "cycles
unhalted" event will happen every clock tick. If it locks up on "hlt",
then you are out of luck -- the event will not happen at all and the
watchdog won't trigger. This is a shortcoming of the local APIC watchdog
-- unfortunately there is no "clock ticks" event that would work all the
time.
The I/O APIC watchdog is driven externally and has no such shortcoming.
But its NMI frequency is much higher, resulting in a more significant hit
to the overall system performance.
Maciej
On Thu, 18 Nov 2004, Stas Sergeev wrote:
> Ah, thanks for explanations!
> Indeed it works as you say.
> Very usefull info, perhaps worth
> being added to documentation?
> So if you ACK the attached patch,
> I ask Andrew to please apply it.
Sure, no problem with that.
> Andrew, the attached patch adds
> the information about the NMI
> watchdog frequency caveats to the
> Documentation/nmi_watchdog.txt
> Unless there are any objections,
> please apply.
Signed-off-by: Maciej W. Rozycki <[email protected]>
--- linux/Documentation/nmi_watchdog.txt.old 2004-10-21 21:21:56.000000000 +0400
+++ linux/Documentation/nmi_watchdog.txt 2004-11-18 20:16:37.972370552 +0300
@@ -54,6 +54,20 @@
cannot even accept NMI interrupts, or the crash has made the kernel
unable to print messages.
+Be aware that when using local APIC, the frequency of NMI interrupts
+it generates, depends on the system load. The local APIC NMI watchdog,
+lacking a better source, uses the "cycles unhalted" event. As you may
+guess it doesn't tick when the CPU is in the halted state (which happens
+when the system is idle), but if your system locks up on anything but the
+"hlt" processor instruction, the watchdog will trigger very soon as the
+"cycles unhalted" event will happen every clock tick. If it locks up on
+"hlt", then you are out of luck -- the event will not happen at all and the
+watchdog won't trigger. This is a shortcoming of the local APIC watchdog
+-- unfortunately there is no "clock ticks" event that would work all the
+time. The I/O APIC watchdog is driven externally and has no such shortcoming.
+But its NMI frequency is much higher, resulting in a more significant hit
+to the overall system performance.
+
NOTE: starting with 2.4.2-ac18 the NMI-oopser is disabled by default,
you have to enable it with a boot time parameter. Prior to 2.4.2-ac18
the NMI-oopser is enabled unconditionally on x86 SMP boxes.
Hi,
Maciej W. Rozycki wrote:
> something CPU-intensive, like:
> and observe the NMI counter ticking every second.
Ah, thanks for explanations!
Indeed it works as you say.
Very usefull info, perhaps worth
being added to documentation?
So if you ACK the attached patch,
I ask Andrew to please apply it.
Andrew, the attached patch adds
the information about the NMI
watchdog frequency caveats to the
Documentation/nmi_watchdog.txt
Unless there are any objections,
please apply.