This is a series of patches that implements a driver for the control
peripheral, EUD (Embedded USB Debugger). The EUD is a mini-USB hub
implemented on chip to support the USB-based debug and trace capabilities.
Apart from debug capabilities, EUD has a control peripheral. Control
Peripheral is on when EUD is on and gets signals like USB attach, pet EUD,
charge phone etc. EUD driver listens to events like USB attach or detach
and charger enable or disable and then notifies the USB driver or PMIC
driver respectively about these events via EXTCON. At regular intervals,
the EUD driver receives an interrupt to pet the driver indicating that
the software is functional.
Changes since v0:
- Remove select SERIAL_CORE from Kconfig as this patch doesn't involve
anything related to serial console
- Changed the dt-bindings to remove extcon and replace it with graphs
to represent a connection with client
Prakruthi Deepak Heragu (2):
dt-bindings: Documentation for qcom,eud
Embedded USB Debugger (EUD) driver
.../devicetree/bindings/soc/qcom/qcom,msm-eud.txt | 28 ++
drivers/soc/qcom/Kconfig | 12 +
drivers/soc/qcom/Makefile | 1 +
drivers/soc/qcom/eud.c | 340 +++++++++++++++++++++
4 files changed, 381 insertions(+)
create mode 100644 Documentation/devicetree/bindings/soc/qcom/qcom,msm-eud.txt
create mode 100644 drivers/soc/qcom/eud.c
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
Add support for control peripheral of EUD (Embedded USB Debugger) to
listen to events such as USB attach/detach, charger enable/disable, pet
EUD to indicate software is functional.
Signed-off-by: Satya Durga Srinivasu Prabhala <[email protected]>
Signed-off-by: Prakruthi Deepak Heragu <[email protected]>
---
drivers/soc/qcom/Kconfig | 12 ++
drivers/soc/qcom/Makefile | 1 +
drivers/soc/qcom/eud.c | 340 ++++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 353 insertions(+)
create mode 100644 drivers/soc/qcom/eud.c
diff --git a/drivers/soc/qcom/Kconfig b/drivers/soc/qcom/Kconfig
index 5856e79..12669ec 100644
--- a/drivers/soc/qcom/Kconfig
+++ b/drivers/soc/qcom/Kconfig
@@ -136,4 +136,16 @@ config QCOM_APR
application processor and QDSP6. APR is
used by audio driver to configure QDSP6
ASM, ADM and AFE modules.
+
+config QCOM_EUD
+ tristate "QTI Embedded USB Debugger (EUD)"
+ depends on ARCH_QCOM
+ help
+ The Embedded USB Debugger (EUD) driver is a driver for the
+ control peripheral which waits on events like USB attach/detach
+ and charger enable/disable. The control peripheral further helps
+ support the USB-based debug and trace capabilities.
+ This module enables support for Qualcomm Technologies, Inc.
+ Embedded USB Debugger (EUD).
+ If unsure, say N.
endmenu
diff --git a/drivers/soc/qcom/Makefile b/drivers/soc/qcom/Makefile
index 19dcf95..dd4701b 100644
--- a/drivers/soc/qcom/Makefile
+++ b/drivers/soc/qcom/Makefile
@@ -15,3 +15,4 @@ obj-$(CONFIG_QCOM_SMP2P) += smp2p.o
obj-$(CONFIG_QCOM_SMSM) += smsm.o
obj-$(CONFIG_QCOM_WCNSS_CTRL) += wcnss_ctrl.o
obj-$(CONFIG_QCOM_APR) += apr.o
+obj-$(CONFIG_QCOM_EUD) += eud.o
diff --git a/drivers/soc/qcom/eud.c b/drivers/soc/qcom/eud.c
new file mode 100644
index 0000000..b4c4235
--- /dev/null
+++ b/drivers/soc/qcom/eud.c
@@ -0,0 +1,340 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2016-2018, The Linux Foundation. All rights reserved.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/err.h>
+#include <linux/platform_device.h>
+#include <linux/extcon.h>
+#include <linux/delay.h>
+#include <linux/sysfs.h>
+#include <linux/io.h>
+#include <linux/bitops.h>
+#include <linux/workqueue.h>
+#include <linux/power_supply.h>
+
+#define EUD_ENABLE_CMD 1
+#define EUD_DISABLE_CMD 0
+
+#define EUD_REG_INT1_EN_MASK 0x0024
+#define EUD_REG_INT_STATUS_1 0x0044
+#define EUD_REG_CTL_OUT_1 0x0074
+#define EUD_REG_VBUS_INT_CLR 0x0080
+#define EUD_REG_CHGR_INT_CLR 0x0084
+#define EUD_REG_CSR_EUD_EN 0x1014
+#define EUD_REG_SW_ATTACH_DET 0x1018
+
+#define EUD_INT_VBUS BIT(2)
+#define EUD_INT_CHGR BIT(3)
+#define EUD_INT_SAFE_MODE BIT(4)
+
+#define EUD_NR 1
+
+struct eud_chip {
+ struct device *dev;
+ int eud_irq;
+ unsigned int extcon_id;
+ unsigned int int_status;
+ bool usb_attach;
+ bool chgr_enable;
+ void __iomem *eud_reg_base;
+ struct extcon_dev *extcon;
+ struct work_struct eud_work;
+};
+
+static const unsigned int eud_extcon_cable[] = {
+ EXTCON_USB,
+ EXTCON_CHG_USB_SDP,
+ EXTCON_NONE,
+};
+
+/*
+ * On the kernel command line specify eud.enable=1 to enable EUD.
+ * EUD is disabled by default.
+ */
+static int enable;
+static bool eud_ready;
+static struct eud_chip *eud_private;
+
+static void enable_eud(struct eud_chip *priv)
+{
+ struct power_supply *usb_psy = NULL;
+ union power_supply_propval pval = {0};
+ union power_supply_propval tval = {0};
+ int ret;
+
+ usb_psy = power_supply_get_by_name("usb");
+ if (!usb_psy)
+ return;
+
+ ret = power_supply_get_property(usb_psy,
+ POWER_SUPPLY_PROP_PRESENT, &pval);
+ if (ret)
+ return;
+
+ ret = power_supply_get_property(usb_psy,
+ POWER_SUPPLY_PROP_REAL_TYPE, &tval);
+ if (ret)
+ return;
+
+ if (pval.intval && (tval.intval == POWER_SUPPLY_TYPE_USB ||
+ tval.intval == POWER_SUPPLY_TYPE_USB_CDP)) {
+ /* write into CSR to enable EUD */
+ writel_relaxed(BIT(0), priv->eud_reg_base + EUD_REG_CSR_EUD_EN);
+ /* Enable vbus, chgr & safe mode warning interrupts */
+ writel_relaxed(EUD_INT_VBUS | EUD_INT_CHGR | EUD_INT_SAFE_MODE,
+ priv->eud_reg_base + EUD_REG_INT1_EN_MASK);
+
+ /* Ensure Register Writes Complete */
+ wmb();
+
+ /*
+ * Set the default cable state to usb connect and charger
+ * enable
+ */
+ ret = extcon_set_state_sync(priv->extcon, EXTCON_USB, true);
+ if (ret)
+ return;
+ ret = extcon_set_state_sync(priv->extcon,
+ EXTCON_CHG_USB_SDP, true);
+ if (ret)
+ return;
+ } else {
+ return;
+ }
+
+}
+
+static void disable_eud(struct eud_chip *priv)
+{
+ /* write into CSR to disable EUD */
+ writel_relaxed(0, priv->eud_reg_base + EUD_REG_CSR_EUD_EN);
+}
+
+static int param_eud_set(const char *val, const struct kernel_param *kp)
+{
+ int enable = 0;
+
+ if (sscanf(val, "%du", &enable) != 1)
+ return -EINVAL;
+
+ if (enable != EUD_ENABLE_CMD && enable != EUD_DISABLE_CMD)
+ return -EINVAL;
+
+ *((uint *)kp->arg) = enable;
+ if (!eud_ready)
+ return 0;
+
+ if (enable == EUD_ENABLE_CMD)
+ enable_eud(eud_private);
+ else if (enable == EUD_DISABLE_CMD)
+ disable_eud(eud_private);
+
+ return 0;
+}
+
+static const struct kernel_param_ops eud_param_ops = {
+ .set = param_eud_set,
+ .get = param_get_int,
+};
+
+module_param_cb(enable, &eud_param_ops, &enable, 0644);
+
+static void eud_event_notifier(struct work_struct *eud_work)
+{
+ struct eud_chip *chip = container_of(eud_work, struct eud_chip,
+ eud_work);
+ int ret;
+
+ if (chip->int_status == EUD_INT_VBUS) {
+ ret = extcon_set_state_sync(chip->extcon, chip->extcon_id,
+ chip->usb_attach);
+ if (ret)
+ return;
+ } else if (chip->int_status == EUD_INT_CHGR) {
+ ret = extcon_set_state_sync(chip->extcon, chip->extcon_id,
+ chip->chgr_enable);
+ if (ret)
+ return;
+ }
+}
+
+static void usb_attach_detach(struct eud_chip *chip)
+{
+ u32 reg;
+
+ chip->extcon_id = EXTCON_USB;
+ /* read ctl_out_1[4] to find USB attach or detach event */
+ reg = readl_relaxed(chip->eud_reg_base + EUD_REG_CTL_OUT_1);
+ if (reg & BIT(4))
+ chip->usb_attach = true;
+ else
+ chip->usb_attach = false;
+
+ schedule_work(&chip->eud_work);
+
+ /* set and clear vbus_int_clr[0] to clear interrupt */
+ writel_relaxed(BIT(0), chip->eud_reg_base + EUD_REG_VBUS_INT_CLR);
+ /* Ensure Register Writes Complete */
+ wmb();
+ writel_relaxed(0, chip->eud_reg_base + EUD_REG_VBUS_INT_CLR);
+}
+
+static void chgr_enable_disable(struct eud_chip *chip)
+{
+ u32 reg;
+
+ chip->extcon_id = EXTCON_CHG_USB_SDP;
+ /* read ctl_out_1[6] to find charger enable or disable event */
+ reg = readl_relaxed(chip->eud_reg_base + EUD_REG_CTL_OUT_1);
+ if (reg & BIT(6))
+ chip->chgr_enable = true;
+ else
+ chip->chgr_enable = false;
+
+ schedule_work(&chip->eud_work);
+
+ /* set and clear chgr_int_clr[0] to clear interrupt */
+ writel_relaxed(BIT(0), chip->eud_reg_base + EUD_REG_CHGR_INT_CLR);
+ /* Ensure Register Writes Complete */
+ wmb();
+ writel_relaxed(0, chip->eud_reg_base + EUD_REG_CHGR_INT_CLR);
+}
+
+static void pet_eud(struct eud_chip *chip)
+{
+ u32 reg;
+
+ /* read sw_attach_det[0] to find attach/detach event */
+ reg = readl_relaxed(chip->eud_reg_base + EUD_REG_SW_ATTACH_DET);
+ if (reg & BIT(0)) {
+ /* Detach & Attach pet for EUD */
+ writel_relaxed(0, chip->eud_reg_base + EUD_REG_SW_ATTACH_DET);
+ /* Ensure Register Writes Complete */
+ wmb();
+ /* Delay to make sure detach pet is done before attach pet */
+ udelay(100);
+ writel_relaxed(BIT(0), chip->eud_reg_base +
+ EUD_REG_SW_ATTACH_DET);
+ /* Ensure Register Writes Complete */
+ wmb();
+ } else {
+ /* Attach pet for EUD */
+ writel_relaxed(BIT(0), chip->eud_reg_base +
+ EUD_REG_SW_ATTACH_DET);
+ /* Ensure Register Writes Complete */
+ wmb();
+ }
+}
+
+static irqreturn_t handle_eud_irq(int irq, void *data)
+{
+ struct eud_chip *chip = data;
+ u32 reg;
+
+ /* read status register and find out which interrupt triggered */
+ reg = readl_relaxed(chip->eud_reg_base + EUD_REG_INT_STATUS_1);
+ if (reg & EUD_INT_VBUS) {
+ chip->int_status = EUD_INT_VBUS;
+ usb_attach_detach(chip);
+ } else if (reg & EUD_INT_CHGR) {
+ chip->int_status = EUD_INT_CHGR;
+ chgr_enable_disable(chip);
+ } else if (reg & EUD_INT_SAFE_MODE) {
+ pet_eud(chip);
+ } else {
+ return IRQ_NONE;
+ }
+
+ return IRQ_HANDLED;
+}
+
+static int msm_eud_probe(struct platform_device *pdev)
+{
+ struct eud_chip *chip;
+ struct resource *res;
+ int ret;
+
+ chip = devm_kzalloc(&pdev->dev, sizeof(*chip), GFP_KERNEL);
+ if (!chip) {
+ ret = -ENOMEM;
+ return ret;
+ }
+
+ platform_set_drvdata(pdev, chip);
+
+ chip->extcon = devm_extcon_dev_allocate(&pdev->dev, eud_extcon_cable);
+ if (IS_ERR(chip->extcon))
+ return PTR_ERR(chip->extcon);
+
+ ret = devm_extcon_dev_register(&pdev->dev, chip->extcon);
+ if (ret)
+ return ret;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res) {
+ ret = -ENOMEM;
+ return ret;
+ }
+
+ chip->eud_reg_base = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(chip->eud_reg_base))
+ return PTR_ERR(chip->eud_reg_base);
+
+ chip->eud_irq = platform_get_irq(pdev, 0);
+
+ ret = devm_request_irq(&pdev->dev, chip->eud_irq, handle_eud_irq,
+ IRQF_TRIGGER_HIGH, NULL, chip);
+ if (ret)
+ return ret;
+
+ device_init_wakeup(&pdev->dev, true);
+ enable_irq_wake(chip->eud_irq);
+
+ INIT_WORK(&chip->eud_work, eud_event_notifier);
+
+ eud_private = chip;
+ eud_ready = true;
+
+ /* Enable EUD */
+ if (enable)
+ enable_eud(eud_private);
+
+ return 0;
+}
+
+static int msm_eud_remove(struct platform_device *pdev)
+{
+ struct eud_chip *chip = platform_get_drvdata(pdev);
+
+ if (enable)
+ disable_eud(eud_private);
+ device_init_wakeup(&pdev->dev, false);
+ disable_irq_wake(chip->eud_irq);
+ platform_set_drvdata(pdev, NULL);
+
+ return 0;
+}
+
+static const struct of_device_id msm_eud_dt_match[] = {
+ {.compatible = "qcom,msm-eud"},
+ {},
+};
+MODULE_DEVICE_TABLE(of, msm_eud_dt_match);
+
+static struct platform_driver msm_eud_driver = {
+ .probe = msm_eud_probe,
+ .remove = msm_eud_remove,
+ .driver = {
+ .name = "msm-eud",
+ .of_match_table = msm_eud_dt_match,
+ },
+};
+module_platform_driver(msm_eud_driver);
+
+MODULE_DESCRIPTION("QTI EUD driver");
+MODULE_LICENSE("GPL v2");
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
Documentation for Embedded USB Debugger (EUD) device tree bindings.
Signed-off-by: Satya Durga Srinivasu Prabhala <[email protected]>
Signed-off-by: Prakruthi Deepak Heragu <[email protected]>
---
.../devicetree/bindings/soc/qcom/qcom,msm-eud.txt | 41 ++++++++++++++++++++++
1 file changed, 41 insertions(+)
create mode 100644 Documentation/devicetree/bindings/soc/qcom/qcom,msm-eud.txt
diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,msm-eud.txt b/Documentation/devicetree/bindings/soc/qcom/qcom,msm-eud.txt
new file mode 100644
index 0000000..a03021a
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/qcom/qcom,msm-eud.txt
@@ -0,0 +1,41 @@
+* Qualcomm Technologies Inc Embedded USB Debugger (EUD)
+
+The EUD (Embedded USB Debugger) is a mini-USB hub implemented
+on chip to support the USB-based debug and trace capabilities.
+
+Required properties:
+
+ - compatible: Should be "qcom,msm-eud"
+ - interrupts: Interrupt number
+ - reg: Should be address and size of EUD register space
+
+Driver notifies clients for VBUS attach/detach and charger enable/disable
+events. The link between client and EUD is established via a directed
+graph. EUD driver has one endpoint of the graph link mentioning EUD as an
+output link and clients registered for these notifications from the EUD
+should have the other endpoint of the graph link as an input link. Each of
+these endpoints should contain a 'remote-endpoint' phandle property that
+points to the corresponding endpoint in the port of the remote device.
+
+An example for EUD device node:
+
+ eud: qcom,msm-eud@88e0000 {
+ compatible = "qcom,msm-eud";
+ interrupts = <GIC_SPI 492 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x88e0000 0x4000>;
+ port {
+ eud_output: endpoint {
+ remote-endpoint = <&usb3_input>;
+ };
+ };
+ };
+
+An example for EUD client:
+
+ usb3 {
+ port {
+ usb3_input: endpoint {
+ remote-endpoint = <&eud_output>;
+ };
+ };
+ };
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
Hi Prakruthi,
On 8/16/2018 5:05 PM, Prakruthi Deepak Heragu wrote:
> +
> +#define EUD_INT_VBUS BIT(2)
> +#define EUD_INT_CHGR BIT(3)
> +#define EUD_INT_SAFE_MODE BIT(4)
> +
> +#define EUD_NR 1
I don't see any use of EUD_NR in the driver below. Do we need it?
On 2018-08-17 12:47, Trilok Soni wrote:
> Hi Prakruthi,
>
> On 8/16/2018 5:05 PM, Prakruthi Deepak Heragu wrote:
>> +
>> +#define EUD_INT_VBUS BIT(2)
>> +#define EUD_INT_CHGR BIT(3)
>> +#define EUD_INT_SAFE_MODE BIT(4)
>> +
>> +#define EUD_NR 1
>
> I don't see any use of EUD_NR in the driver below. Do we need it?
Sorry about that. Will get rid of it.
On 8/16/2018 5:05 PM, Prakruthi Deepak Heragu wrote:
> This is a series of patches that implements a driver for the control
> peripheral, EUD (Embedded USB Debugger). The EUD is a mini-USB hub
> implemented on chip to support the USB-based debug and trace capabilities.
> Apart from debug capabilities, EUD has a control peripheral. Control
> Peripheral is on when EUD is on and gets signals like USB attach, pet EUD,
> charge phone etc. EUD driver listens to events like USB attach or detach
> and charger enable or disable and then notifies the USB driver or PMIC
> driver respectively about these events via EXTCON. At regular intervals,
> the EUD driver receives an interrupt to pet the driver indicating that
> the software is functional.
Any other review comments on this patch series?
---Trilok Soni