2023-10-04 19:13:36

by Robert Marko

[permalink] [raw]
Subject: [PATCH] arm64: dts: qcom: ipq5018: add QUP1 SPI controller

Add the required BAM and QUP nodes for the QUP1 SPI controller on IPQ5018.

Signed-off-by: Robert Marko <[email protected]>
---
arch/arm64/boot/dts/qcom/ipq5018.dtsi | 24 ++++++++++++++++++++++++
1 file changed, 24 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/ipq5018.dtsi b/arch/arm64/boot/dts/qcom/ipq5018.dtsi
index 38ffdc3cbdcd..484034e65f4f 100644
--- a/arch/arm64/boot/dts/qcom/ipq5018.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq5018.dtsi
@@ -146,6 +146,16 @@ sdhc_1: mmc@7804000 {
status = "disabled";
};

+ blsp_dma: dma-controller@7884000 {
+ compatible = "qcom,bam-v1.7.0";
+ reg = <0x07884000 0x1d000>;
+ interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_BLSP1_AHB_CLK>;
+ clock-names = "bam_clk";
+ #dma-cells = <1>;
+ qcom,ee = <0>;
+ };
+
blsp1_uart1: serial@78af000 {
compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
reg = <0x078af000 0x200>;
@@ -156,6 +166,20 @@ blsp1_uart1: serial@78af000 {
status = "disabled";
};

+ blsp1_spi1: spi@78b5000 {
+ compatible = "qcom,spi-qup-v2.2.1";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x78b5000 0x600>;
+ interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_BLSP1_QUP1_SPI_APPS_CLK>,
+ <&gcc GCC_BLSP1_AHB_CLK>;
+ clock-names = "core", "iface";
+ dmas = <&blsp_dma 4>, <&blsp_dma 5>;
+ dma-names = "tx", "rx";
+ status = "disabled";
+ };
+
intc: interrupt-controller@b000000 {
compatible = "qcom,msm-qgic2";
reg = <0x0b000000 0x1000>, /* GICD */
--
2.41.0


2023-10-05 15:21:59

by Kathiravan Thirumoorthy

[permalink] [raw]
Subject: Re: [PATCH] arm64: dts: qcom: ipq5018: add QUP1 SPI controller


On 10/5/2023 7:18 PM, Kathiravan Thirumoorthy wrote:
>
> On 10/5/2023 12:42 AM, Robert Marko wrote:
>> Add the required BAM and QUP nodes for the QUP1 SPI controller on
>> IPQ5018.
>>
>> Signed-off-by: Robert Marko <[email protected]>
>> ---
>>   arch/arm64/boot/dts/qcom/ipq5018.dtsi | 24 ++++++++++++++++++++++++
>>   1 file changed, 24 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/qcom/ipq5018.dtsi
>> b/arch/arm64/boot/dts/qcom/ipq5018.dtsi
>> index 38ffdc3cbdcd..484034e65f4f 100644
>> --- a/arch/arm64/boot/dts/qcom/ipq5018.dtsi
>> +++ b/arch/arm64/boot/dts/qcom/ipq5018.dtsi
>> @@ -146,6 +146,16 @@ sdhc_1: mmc@7804000 {
>>               status = "disabled";
>>           };
>>   +        blsp_dma: dma-controller@7884000 {
>> +            compatible = "qcom,bam-v1.7.0";
>> +            reg = <0x07884000 0x1d000>;
>> +            interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>;
>> +            clocks = <&gcc GCC_BLSP1_AHB_CLK>;
>> +            clock-names = "bam_clk";
>> +            #dma-cells = <1>;
>> +            qcom,ee = <0>;
>> +        };
>> +
>>           blsp1_uart1: serial@78af000 {
>>               compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
>>               reg = <0x078af000 0x200>;
>> @@ -156,6 +166,20 @@ blsp1_uart1: serial@78af000 {
>>               status = "disabled";
>>           };
>>   +        blsp1_spi1: spi@78b5000 {
>> +            compatible = "qcom,spi-qup-v2.2.1";
>> +            #address-cells = <1>;
>> +            #size-cells = <0>;
>> +            reg = <0x78b5000 0x600>;
>
>
> Please pad the address part to 8 hex digits with leading zeroes. With
> that,
>
> Reviewed-by: Kathiravan T <[email protected]>

Once again, missed to spell out last name...

Reviewed-by: Kathiravan Thirumoorthy <[email protected]>


>
>
>> +            interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
>> +            clocks = <&gcc GCC_BLSP1_QUP1_SPI_APPS_CLK>,
>> +                 <&gcc GCC_BLSP1_AHB_CLK>;
>> +            clock-names = "core", "iface";
>> +            dmas = <&blsp_dma 4>, <&blsp_dma 5>;
>> +            dma-names = "tx", "rx";
>> +            status = "disabled";
>> +        };
>> +
>>           intc: interrupt-controller@b000000 {
>>               compatible = "qcom,msm-qgic2";
>>               reg = <0x0b000000 0x1000>,  /* GICD */

2023-10-05 16:17:54

by Kathiravan Thirumoorthy

[permalink] [raw]
Subject: Re: [PATCH] arm64: dts: qcom: ipq5018: add QUP1 SPI controller


On 10/5/2023 12:42 AM, Robert Marko wrote:
> Add the required BAM and QUP nodes for the QUP1 SPI controller on IPQ5018.
>
> Signed-off-by: Robert Marko <[email protected]>
> ---
> arch/arm64/boot/dts/qcom/ipq5018.dtsi | 24 ++++++++++++++++++++++++
> 1 file changed, 24 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/ipq5018.dtsi b/arch/arm64/boot/dts/qcom/ipq5018.dtsi
> index 38ffdc3cbdcd..484034e65f4f 100644
> --- a/arch/arm64/boot/dts/qcom/ipq5018.dtsi
> +++ b/arch/arm64/boot/dts/qcom/ipq5018.dtsi
> @@ -146,6 +146,16 @@ sdhc_1: mmc@7804000 {
> status = "disabled";
> };
>
> + blsp_dma: dma-controller@7884000 {
> + compatible = "qcom,bam-v1.7.0";
> + reg = <0x07884000 0x1d000>;
> + interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&gcc GCC_BLSP1_AHB_CLK>;
> + clock-names = "bam_clk";
> + #dma-cells = <1>;
> + qcom,ee = <0>;
> + };
> +
> blsp1_uart1: serial@78af000 {
> compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
> reg = <0x078af000 0x200>;
> @@ -156,6 +166,20 @@ blsp1_uart1: serial@78af000 {
> status = "disabled";
> };
>
> + blsp1_spi1: spi@78b5000 {
> + compatible = "qcom,spi-qup-v2.2.1";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <0x78b5000 0x600>;


Please pad the address part to 8 hex digits with leading zeroes. With that,

Reviewed-by: Kathiravan T <[email protected]>


> + interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&gcc GCC_BLSP1_QUP1_SPI_APPS_CLK>,
> + <&gcc GCC_BLSP1_AHB_CLK>;
> + clock-names = "core", "iface";
> + dmas = <&blsp_dma 4>, <&blsp_dma 5>;
> + dma-names = "tx", "rx";
> + status = "disabled";
> + };
> +
> intc: interrupt-controller@b000000 {
> compatible = "qcom,msm-qgic2";
> reg = <0x0b000000 0x1000>, /* GICD */

2023-10-16 18:55:18

by Bjorn Andersson

[permalink] [raw]
Subject: Re: [PATCH] arm64: dts: qcom: ipq5018: add QUP1 SPI controller

On Wed, Oct 04, 2023 at 09:12:30PM +0200, Robert Marko wrote:
> Add the required BAM and QUP nodes for the QUP1 SPI controller on IPQ5018.
>
> Signed-off-by: Robert Marko <[email protected]>

I padded the spi node to 8 digits, and applied the patch.

Thanks,
Bjorn

> ---
> arch/arm64/boot/dts/qcom/ipq5018.dtsi | 24 ++++++++++++++++++++++++
> 1 file changed, 24 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/ipq5018.dtsi b/arch/arm64/boot/dts/qcom/ipq5018.dtsi
> index 38ffdc3cbdcd..484034e65f4f 100644
> --- a/arch/arm64/boot/dts/qcom/ipq5018.dtsi
> +++ b/arch/arm64/boot/dts/qcom/ipq5018.dtsi
> @@ -146,6 +146,16 @@ sdhc_1: mmc@7804000 {
> status = "disabled";
> };
>
> + blsp_dma: dma-controller@7884000 {
> + compatible = "qcom,bam-v1.7.0";
> + reg = <0x07884000 0x1d000>;
> + interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&gcc GCC_BLSP1_AHB_CLK>;
> + clock-names = "bam_clk";
> + #dma-cells = <1>;
> + qcom,ee = <0>;
> + };
> +
> blsp1_uart1: serial@78af000 {
> compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
> reg = <0x078af000 0x200>;
> @@ -156,6 +166,20 @@ blsp1_uart1: serial@78af000 {
> status = "disabled";
> };
>
> + blsp1_spi1: spi@78b5000 {
> + compatible = "qcom,spi-qup-v2.2.1";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <0x78b5000 0x600>;
> + interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&gcc GCC_BLSP1_QUP1_SPI_APPS_CLK>,
> + <&gcc GCC_BLSP1_AHB_CLK>;
> + clock-names = "core", "iface";
> + dmas = <&blsp_dma 4>, <&blsp_dma 5>;
> + dma-names = "tx", "rx";
> + status = "disabled";
> + };
> +
> intc: interrupt-controller@b000000 {
> compatible = "qcom,msm-qgic2";
> reg = <0x0b000000 0x1000>, /* GICD */
> --
> 2.41.0
>

2023-10-16 19:53:40

by Robert Marko

[permalink] [raw]
Subject: Re: [PATCH] arm64: dts: qcom: ipq5018: add QUP1 SPI controller

On Mon, 16 Oct 2023 at 20:54, Bjorn Andersson <[email protected]> wrote:
>
> On Wed, Oct 04, 2023 at 09:12:30PM +0200, Robert Marko wrote:
> > Add the required BAM and QUP nodes for the QUP1 SPI controller on IPQ5018.
> >
> > Signed-off-by: Robert Marko <[email protected]>
>
> I padded the spi node to 8 digits, and applied the patch.

Thank you for this, it was in my TODO but that is quite long.

Regards,
Robert
>
> Thanks,
> Bjorn
>
> > ---
> > arch/arm64/boot/dts/qcom/ipq5018.dtsi | 24 ++++++++++++++++++++++++
> > 1 file changed, 24 insertions(+)
> >
> > diff --git a/arch/arm64/boot/dts/qcom/ipq5018.dtsi b/arch/arm64/boot/dts/qcom/ipq5018.dtsi
> > index 38ffdc3cbdcd..484034e65f4f 100644
> > --- a/arch/arm64/boot/dts/qcom/ipq5018.dtsi
> > +++ b/arch/arm64/boot/dts/qcom/ipq5018.dtsi
> > @@ -146,6 +146,16 @@ sdhc_1: mmc@7804000 {
> > status = "disabled";
> > };
> >
> > + blsp_dma: dma-controller@7884000 {
> > + compatible = "qcom,bam-v1.7.0";
> > + reg = <0x07884000 0x1d000>;
> > + interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>;
> > + clocks = <&gcc GCC_BLSP1_AHB_CLK>;
> > + clock-names = "bam_clk";
> > + #dma-cells = <1>;
> > + qcom,ee = <0>;
> > + };
> > +
> > blsp1_uart1: serial@78af000 {
> > compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
> > reg = <0x078af000 0x200>;
> > @@ -156,6 +166,20 @@ blsp1_uart1: serial@78af000 {
> > status = "disabled";
> > };
> >
> > + blsp1_spi1: spi@78b5000 {
> > + compatible = "qcom,spi-qup-v2.2.1";
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > + reg = <0x78b5000 0x600>;
> > + interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
> > + clocks = <&gcc GCC_BLSP1_QUP1_SPI_APPS_CLK>,
> > + <&gcc GCC_BLSP1_AHB_CLK>;
> > + clock-names = "core", "iface";
> > + dmas = <&blsp_dma 4>, <&blsp_dma 5>;
> > + dma-names = "tx", "rx";
> > + status = "disabled";
> > + };
> > +
> > intc: interrupt-controller@b000000 {
> > compatible = "qcom,msm-qgic2";
> > reg = <0x0b000000 0x1000>, /* GICD */
> > --
> > 2.41.0
> >