From: Bartosz Golaszewski <[email protected]>
This series converts the only user of the handcoded, mach-specific reset
routines in the davinci platform to using the reset framework.
Patches 1-3 add necessary lookups/DT-properties.
Patches 4-6 fix issues found in the remoteproc davinci driver.
Patch 7 converts the davinci-rproc driver to the reset framework.
Patch 8 removes now dead code.
Tested both in DT and legacy modes by booting the examples from
ti-ipc-rtos recipe in meta-ti.
This series applies on top of David Lechner's common-clk-v9 branch[1]
with Philipp Zabel's reset/next branch[2] pulled in.
It can be found in my github tree as well[3].
[1] git://github.com/dlech/ev3dev-kernel.git common-clk-v9
[2] git://git.pengutronix.de/git/pza/linux reset/next
[3] [email protected]:brgl/linux.git topic/davinci-reset
v1 -> v2:
- fixed the device tree patches the descriptions of which were mixed up
- return -EPROBE_DEFER from davinci-rproc's probe() if we can't get the
reset provider, since it's possible that the lookup table was not yet
registered
- made the local variable naming consistent in the davinci-rproc driver
- fixed a typo in PATCH 5/8
v2 -> v3:
- modify PATCH 1/8: drop the provider argument from the function adding
lookup entries and instead pass the provider name to the RESET_LOOKUP
macro, return -EPROBE_DEFER if we locate a correct lookup entry but
cannot get the corresponding reset controller
- modify the reset lookup entry in psc-da850
- don't manually return -EPROBE_DEFER from davinci-rproc, instead don't
emit an error message if devm_reset_control_get_exclusive() returns
this error code
v3 -> v4:
- make index the second parameter in RESET_LOOKUP() (right after the
provider name)
v4 -> v5:
- fix a bug where the dsp_reset object correctly stored in drproc struct
Bartosz Golaszewski (8):
ARM: davinci: dts: make psc0 a reset provider
ARM: davinci: dts: add a reset control to the dsp node
clk: davinci: add a reset lookup table for psc0
remoteproc/davinci: add the missing retval check for clk_enable()
remoteproc/davinci: prepare and unprepare the clock where needed
remoteproc/davinci: use octal permissions for module_param()
remoteproc/davinci: use the reset framework
clk: davinci: kill davinci_clk_reset_assert/deassert()
arch/arm/boot/dts/da850.dtsi | 2 ++
arch/arm/mach-davinci/include/mach/clock.h | 21 --------------
drivers/clk/davinci/psc-da850.c | 7 +++++
drivers/clk/davinci/psc.c | 19 +-----------
drivers/remoteproc/da8xx_remoteproc.c | 46 ++++++++++++++++++++++++------
5 files changed, 48 insertions(+), 47 deletions(-)
delete mode 100644 arch/arm/mach-davinci/include/mach/clock.h
--
2.16.3
From: Bartosz Golaszewski <[email protected]>
The davinci-rproc driver will soon use the reset framework. Add the
resets property to the dsp node in da850.dtsi.
Signed-off-by: Bartosz Golaszewski <[email protected]>
---
arch/arm/boot/dts/da850.dtsi | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm/boot/dts/da850.dtsi b/arch/arm/boot/dts/da850.dtsi
index dad64dbf1f23..5b485e44b83e 100644
--- a/arch/arm/boot/dts/da850.dtsi
+++ b/arch/arm/boot/dts/da850.dtsi
@@ -109,6 +109,7 @@
interrupt-parent = <&intc>;
interrupts = <28>;
clocks = <&psc0 15>;
+ resets = <&psc0 15>;
status = "disabled";
};
soc@1c00000 {
--
2.16.3
From: Bartosz Golaszewski <[email protected]>
In order to be able to use the reset framework in legacy boot mode as
well, add the reset lookup table to the psc driver for da850 variant.
Signed-off-by: Bartosz Golaszewski <[email protected]>
---
drivers/clk/davinci/psc-da850.c | 7 +++++++
drivers/clk/davinci/psc.c | 1 +
2 files changed, 8 insertions(+)
diff --git a/drivers/clk/davinci/psc-da850.c b/drivers/clk/davinci/psc-da850.c
index ccc7eb17bf3a..d196dcbed560 100644
--- a/drivers/clk/davinci/psc-da850.c
+++ b/drivers/clk/davinci/psc-da850.c
@@ -6,6 +6,7 @@
*/
#include <linux/clk-provider.h>
+#include <linux/reset-controller.h>
#include <linux/clk.h>
#include <linux/clkdev.h>
#include <linux/init.h>
@@ -66,8 +67,14 @@ LPSC_CLKDEV3(ecap_clkdev, "fck", "ecap.0",
"fck", "ecap.1",
"fck", "ecap.2");
+static struct reset_control_lookup da850_psc0_reset_lookup_table[] = {
+ RESET_LOOKUP("da850-psc0", 15, "davinci-rproc.0", NULL),
+};
+
static int da850_psc0_init(struct device *dev, void __iomem *base)
{
+ reset_controller_add_lookup(da850_psc0_reset_lookup_table,
+ ARRAY_SIZE(da850_psc0_reset_lookup_table));
return davinci_psc_register_clocks(dev, da850_psc0_info, 16, base);
}
diff --git a/drivers/clk/davinci/psc.c b/drivers/clk/davinci/psc.c
index 3b0e59dfbdd7..063df62381ea 100644
--- a/drivers/clk/davinci/psc.c
+++ b/drivers/clk/davinci/psc.c
@@ -425,6 +425,7 @@ __davinci_psc_register_clocks(struct device *dev,
psc->rcdev.ops = &davinci_psc_reset_ops;
psc->rcdev.owner = THIS_MODULE;
+ psc->rcdev.dev = dev;
psc->rcdev.of_node = dev->of_node;
psc->rcdev.of_reset_n_cells = 1;
psc->rcdev.of_xlate = davinci_psc_reset_of_xlate;
--
2.16.3
From: Bartosz Golaszewski <[email protected]>
The davinci platform is being switched to using the common clock
framework, where clk_enable() can fail. Add the return value check.
Signed-off-by: Bartosz Golaszewski <[email protected]>
Acked-by: Suman Anna <[email protected]>
---
drivers/remoteproc/da8xx_remoteproc.c | 8 +++++++-
1 file changed, 7 insertions(+), 1 deletion(-)
diff --git a/drivers/remoteproc/da8xx_remoteproc.c b/drivers/remoteproc/da8xx_remoteproc.c
index bf3b9034c319..2b24291337b7 100644
--- a/drivers/remoteproc/da8xx_remoteproc.c
+++ b/drivers/remoteproc/da8xx_remoteproc.c
@@ -138,6 +138,7 @@ static int da8xx_rproc_start(struct rproc *rproc)
struct device *dev = rproc->dev.parent;
struct da8xx_rproc *drproc = (struct da8xx_rproc *)rproc->priv;
struct clk *dsp_clk = drproc->dsp_clk;
+ int ret;
/* hw requires the start (boot) address be on 1KB boundary */
if (rproc->bootaddr & 0x3ff) {
@@ -148,7 +149,12 @@ static int da8xx_rproc_start(struct rproc *rproc)
writel(rproc->bootaddr, drproc->bootreg);
- clk_enable(dsp_clk);
+ ret = clk_enable(dsp_clk);
+ if (ret) {
+ dev_err(dev, "clk_enable() failed: %d\n", ret);
+ return ret;
+ }
+
davinci_clk_reset_deassert(dsp_clk);
return 0;
--
2.16.3
From: Bartosz Golaszewski <[email protected]>
This code is no longer used. Remove it.
Signed-off-by: Bartosz Golaszewski <[email protected]>
Reviewed-by: David Lechner <[email protected]>
---
arch/arm/mach-davinci/include/mach/clock.h | 21 ---------------------
drivers/clk/davinci/psc.c | 18 ------------------
2 files changed, 39 deletions(-)
delete mode 100644 arch/arm/mach-davinci/include/mach/clock.h
diff --git a/arch/arm/mach-davinci/include/mach/clock.h b/arch/arm/mach-davinci/include/mach/clock.h
deleted file mode 100644
index 42ed4f2f5ce4..000000000000
--- a/arch/arm/mach-davinci/include/mach/clock.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/*
- * arch/arm/mach-davinci/include/mach/clock.h
- *
- * Clock control driver for DaVinci - header file
- *
- * Authors: Vladimir Barinov <[email protected]>
- *
- * 2007 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-#ifndef __ASM_ARCH_DAVINCI_CLOCK_H
-#define __ASM_ARCH_DAVINCI_CLOCK_H
-
-struct clk;
-
-int davinci_clk_reset_assert(struct clk *c);
-int davinci_clk_reset_deassert(struct clk *c);
-
-#endif
diff --git a/drivers/clk/davinci/psc.c b/drivers/clk/davinci/psc.c
index 063df62381ea..75c4bc6f23e3 100644
--- a/drivers/clk/davinci/psc.c
+++ b/drivers/clk/davinci/psc.c
@@ -295,24 +295,6 @@ static int davinci_lpsc_clk_reset(struct clk *clk, bool reset)
return 0;
}
-/*
- * REVISIT: These exported functions can be removed after a non-DT lookup is
- * added to the reset controller framework and the davinci-rproc driver is
- * updated to use the generic reset controller framework.
- */
-
-int davinci_clk_reset_assert(struct clk *clk)
-{
- return davinci_lpsc_clk_reset(clk, true);
-}
-EXPORT_SYMBOL(davinci_clk_reset_assert);
-
-int davinci_clk_reset_deassert(struct clk *clk)
-{
- return davinci_lpsc_clk_reset(clk, false);
-}
-EXPORT_SYMBOL(davinci_clk_reset_deassert);
-
static int davinci_psc_reset_assert(struct reset_controller_dev *rcdev,
unsigned long id)
{
--
2.16.3
From: Bartosz Golaszewski <[email protected]>
Checkpatch recommends to use octal perms instead of S_IRUGO.
Signed-off-by: Bartosz Golaszewski <[email protected]>
---
drivers/remoteproc/da8xx_remoteproc.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/remoteproc/da8xx_remoteproc.c b/drivers/remoteproc/da8xx_remoteproc.c
index f134192922e0..b668e32996e2 100644
--- a/drivers/remoteproc/da8xx_remoteproc.c
+++ b/drivers/remoteproc/da8xx_remoteproc.c
@@ -25,7 +25,7 @@
#include "remoteproc_internal.h"
static char *da8xx_fw_name;
-module_param(da8xx_fw_name, charp, S_IRUGO);
+module_param(da8xx_fw_name, charp, 0444);
MODULE_PARM_DESC(da8xx_fw_name,
"Name of DSP firmware file in /lib/firmware (if not specified defaults to 'rproc-dsp-fw')");
--
2.16.3
From: Bartosz Golaszewski <[email protected]>
Switch to using the reset framework instead of handcoded reset routines
we used so far.
Signed-off-by: Bartosz Golaszewski <[email protected]>
---
drivers/remoteproc/da8xx_remoteproc.c | 34 +++++++++++++++++++++++++++++-----
1 file changed, 29 insertions(+), 5 deletions(-)
diff --git a/drivers/remoteproc/da8xx_remoteproc.c b/drivers/remoteproc/da8xx_remoteproc.c
index b668e32996e2..76c06b70a1c6 100644
--- a/drivers/remoteproc/da8xx_remoteproc.c
+++ b/drivers/remoteproc/da8xx_remoteproc.c
@@ -10,6 +10,7 @@
#include <linux/bitops.h>
#include <linux/clk.h>
+#include <linux/reset.h>
#include <linux/err.h>
#include <linux/interrupt.h>
#include <linux/io.h>
@@ -20,8 +21,6 @@
#include <linux/platform_device.h>
#include <linux/remoteproc.h>
-#include <mach/clock.h> /* for davinci_clk_reset_assert/deassert() */
-
#include "remoteproc_internal.h"
static char *da8xx_fw_name;
@@ -72,6 +71,7 @@ struct da8xx_rproc {
struct da8xx_rproc_mem *mem;
int num_mems;
struct clk *dsp_clk;
+ struct reset_control *dsp_reset;
void (*ack_fxn)(struct irq_data *data);
struct irq_data *irq_data;
void __iomem *chipsig;
@@ -138,6 +138,7 @@ static int da8xx_rproc_start(struct rproc *rproc)
struct device *dev = rproc->dev.parent;
struct da8xx_rproc *drproc = (struct da8xx_rproc *)rproc->priv;
struct clk *dsp_clk = drproc->dsp_clk;
+ struct reset_control *dsp_reset = drproc->dsp_reset;
int ret;
/* hw requires the start (boot) address be on 1KB boundary */
@@ -155,7 +156,12 @@ static int da8xx_rproc_start(struct rproc *rproc)
return ret;
}
- davinci_clk_reset_deassert(dsp_clk);
+ ret = reset_control_deassert(dsp_reset);
+ if (ret) {
+ dev_err(dev, "reset_control_deassert() failed: %d\n", ret);
+ clk_disable_unprepare(dsp_clk);
+ return ret;
+ }
return 0;
}
@@ -163,8 +169,15 @@ static int da8xx_rproc_start(struct rproc *rproc)
static int da8xx_rproc_stop(struct rproc *rproc)
{
struct da8xx_rproc *drproc = rproc->priv;
+ struct device *dev = rproc->dev.parent;
+ int ret;
+
+ ret = reset_control_assert(drproc->dsp_reset);
+ if (ret) {
+ dev_err(dev, "reset_control_assert() failed: %d\n", ret);
+ return ret;
+ }
- davinci_clk_reset_assert(drproc->dsp_clk);
clk_disable_unprepare(drproc->dsp_clk);
return 0;
@@ -232,6 +245,7 @@ static int da8xx_rproc_probe(struct platform_device *pdev)
struct resource *bootreg_res;
struct resource *chipsig_res;
struct clk *dsp_clk;
+ struct reset_control *dsp_reset;
void __iomem *chipsig;
void __iomem *bootreg;
int irq;
@@ -268,6 +282,15 @@ static int da8xx_rproc_probe(struct platform_device *pdev)
return PTR_ERR(dsp_clk);
}
+ dsp_reset = devm_reset_control_get_exclusive(dev, NULL);
+ if (IS_ERR(dsp_reset)) {
+ if (PTR_ERR(dsp_reset) != -EPROBE_DEFER)
+ dev_err(dev, "unable to get reset control: %ld\n",
+ PTR_ERR(dsp_reset));
+
+ return PTR_ERR(dsp_reset);
+ }
+
if (dev->of_node) {
ret = of_reserved_mem_device_init(dev);
if (ret) {
@@ -287,6 +310,7 @@ static int da8xx_rproc_probe(struct platform_device *pdev)
drproc = rproc->priv;
drproc->rproc = rproc;
drproc->dsp_clk = dsp_clk;
+ drproc->dsp_reset = dsp_reset;
rproc->has_iommu = false;
ret = da8xx_rproc_get_internal_memories(pdev, drproc);
@@ -309,7 +333,7 @@ static int da8xx_rproc_probe(struct platform_device *pdev)
* *not* in reset, but da8xx_rproc_start() needs the DSP to be
* held in reset at the time it is called.
*/
- ret = davinci_clk_reset_assert(drproc->dsp_clk);
+ ret = reset_control_assert(dsp_reset);
if (ret)
goto free_rproc;
--
2.16.3
From: Bartosz Golaszewski <[email protected]>
We're currently switching the platform to using the common clock
framework. We need to explicitly prepare and unprepare the rproc
clock.
Signed-off-by: Bartosz Golaszewski <[email protected]>
Acked-by: Suman Anna <[email protected]>
---
drivers/remoteproc/da8xx_remoteproc.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/remoteproc/da8xx_remoteproc.c b/drivers/remoteproc/da8xx_remoteproc.c
index 2b24291337b7..f134192922e0 100644
--- a/drivers/remoteproc/da8xx_remoteproc.c
+++ b/drivers/remoteproc/da8xx_remoteproc.c
@@ -149,9 +149,9 @@ static int da8xx_rproc_start(struct rproc *rproc)
writel(rproc->bootaddr, drproc->bootreg);
- ret = clk_enable(dsp_clk);
+ ret = clk_prepare_enable(dsp_clk);
if (ret) {
- dev_err(dev, "clk_enable() failed: %d\n", ret);
+ dev_err(dev, "clk_prepare_enable() failed: %d\n", ret);
return ret;
}
@@ -165,7 +165,7 @@ static int da8xx_rproc_stop(struct rproc *rproc)
struct da8xx_rproc *drproc = rproc->priv;
davinci_clk_reset_assert(drproc->dsp_clk);
- clk_disable(drproc->dsp_clk);
+ clk_disable_unprepare(drproc->dsp_clk);
return 0;
}
--
2.16.3
From: Bartosz Golaszewski <[email protected]>
The psc driver registers with the reset framework as a provider. Add
the #reset-cells property to the psc0 node.
Signed-off-by: Bartosz Golaszewski <[email protected]>
---
arch/arm/boot/dts/da850.dtsi | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm/boot/dts/da850.dtsi b/arch/arm/boot/dts/da850.dtsi
index a3b9a99b43ca..dad64dbf1f23 100644
--- a/arch/arm/boot/dts/da850.dtsi
+++ b/arch/arm/boot/dts/da850.dtsi
@@ -123,6 +123,7 @@
compatible = "ti,da850-psc0";
reg = <0x10000 0x1000>;
#clock-cells = <1>;
+ #reset-cells = <1>;
#power-domain-cells = <1>;
clocks = <&pll0_sysclk 1>, <&pll0_sysclk 2>,
<&pll0_sysclk 4>, <&pll0_sysclk 6>,
--
2.16.3
On 3/30/18 10:28 AM, Bartosz Golaszewski wrote:
> From: Bartosz Golaszewski <[email protected]>
>
> The psc driver registers with the reset framework as a provider. Add
> the #reset-cells property to the psc0 node.
>
> Signed-off-by: Bartosz Golaszewski <[email protected]>
> ---
> arch/arm/boot/dts/da850.dtsi | 1 +
> 1 file changed, 1 insertion(+)
>
> diff --git a/arch/arm/boot/dts/da850.dtsi b/arch/arm/boot/dts/da850.dtsi
> index a3b9a99b43ca..dad64dbf1f23 100644
> --- a/arch/arm/boot/dts/da850.dtsi
> +++ b/arch/arm/boot/dts/da850.dtsi
> @@ -123,6 +123,7 @@
> compatible = "ti,da850-psc0";
> reg = <0x10000 0x1000>;
> #clock-cells = <1>;
> + #reset-cells = <1>;
> #power-domain-cells = <1>;
> clocks = <&pll0_sysclk 1>, <&pll0_sysclk 2>,
> <&pll0_sysclk 4>, <&pll0_sysclk 6>,
>
Reviewed-by: David Lechner <[email protected]>
On 3/30/18 10:28 AM, Bartosz Golaszewski wrote:
> From: Bartosz Golaszewski <[email protected]>
>
> The davinci-rproc driver will soon use the reset framework. Add the
> resets property to the dsp node in da850.dtsi.
>
> Signed-off-by: Bartosz Golaszewski <[email protected]>
> ---
> arch/arm/boot/dts/da850.dtsi | 1 +
> 1 file changed, 1 insertion(+)
>
> diff --git a/arch/arm/boot/dts/da850.dtsi b/arch/arm/boot/dts/da850.dtsi
> index dad64dbf1f23..5b485e44b83e 100644
> --- a/arch/arm/boot/dts/da850.dtsi
> +++ b/arch/arm/boot/dts/da850.dtsi
> @@ -109,6 +109,7 @@
> interrupt-parent = <&intc>;
> interrupts = <28>;
> clocks = <&psc0 15>;
> + resets = <&psc0 15>;
> status = "disabled";
> };
> soc@1c00000 {
>
Reviewed-by: David Lechner <[email protected]>
On 3/30/18 10:28 AM, Bartosz Golaszewski wrote:
> From: Bartosz Golaszewski <[email protected]>
>
> In order to be able to use the reset framework in legacy boot mode as
> well, add the reset lookup table to the psc driver for da850 variant.
>
> Signed-off-by: Bartosz Golaszewski <[email protected]>
> ---
Reviewed-by: David Lechner <[email protected]>
On 3/30/18 10:28 AM, Bartosz Golaszewski wrote:
> From: Bartosz Golaszewski <[email protected]>
>
> The davinci platform is being switched to using the common clock
> framework, where clk_enable() can fail. Add the return value check.
>
> Signed-off-by: Bartosz Golaszewski <[email protected]>
> Acked-by: Suman Anna <[email protected]>
> ---
Reviewed-by: David Lechner <[email protected]>
On 3/30/18 10:28 AM, Bartosz Golaszewski wrote:
> From: Bartosz Golaszewski <[email protected]>
>
> We're currently switching the platform to using the common clock
> framework. We need to explicitly prepare and unprepare the rproc
> clock.
>
> Signed-off-by: Bartosz Golaszewski <[email protected]>
> Acked-by: Suman Anna <[email protected]>
> ---
Reviewed-by: David Lechner <[email protected]>
Quoting Bartosz Golaszewski (2018-03-30 08:28:51)
> From: Bartosz Golaszewski <[email protected]>
>
> In order to be able to use the reset framework in legacy boot mode as
> well, add the reset lookup table to the psc driver for da850 variant.
>
> Signed-off-by: Bartosz Golaszewski <[email protected]>
> ---
Applied to clk-next
Quoting Bartosz Golaszewski (2018-03-30 08:28:56)
> From: Bartosz Golaszewski <[email protected]>
>
> This code is no longer used. Remove it.
>
> Signed-off-by: Bartosz Golaszewski <[email protected]>
> Reviewed-by: David Lechner <[email protected]>
> ---
I'll try to remember, but please send this again if we need to apply it
to the clk tree for 4.18.
Acked-by: Stephen Boyd <[email protected]>