2019-09-16 09:23:33

by Christophe Leroy

[permalink] [raw]
Subject: [PATCH v2 1/2] powerpc/32s: automatically allocate BAT in setbat()

If no BAT is given to setbat(), select an available BAT.

Signed-off-by: Christophe Leroy <[email protected]>

---
v2: no change
---
arch/powerpc/mm/book3s32/mmu.c | 11 ++++++++++-
1 file changed, 10 insertions(+), 1 deletion(-)

diff --git a/arch/powerpc/mm/book3s32/mmu.c b/arch/powerpc/mm/book3s32/mmu.c
index 84d5fab94f8f..69b2419accef 100644
--- a/arch/powerpc/mm/book3s32/mmu.c
+++ b/arch/powerpc/mm/book3s32/mmu.c
@@ -251,9 +251,18 @@ void __init setbat(int index, unsigned long virt, phys_addr_t phys,
{
unsigned int bl;
int wimgxpp;
- struct ppc_bat *bat = BATS[index];
+ struct ppc_bat *bat;
unsigned long flags = pgprot_val(prot);

+ if (index == -1)
+ index = find_free_bat();
+ if (index == -1) {
+ pr_err("%s: no BAT available for mapping 0x%llx\n", __func__,
+ (unsigned long long)phys);
+ return;
+ }
+ bat = BATS[index];
+
if ((flags & _PAGE_NO_CACHE) ||
(cpu_has_feature(CPU_FTR_NEED_COHERENT) == 0))
flags &= ~_PAGE_COHERENT;
--
2.13.3


2019-09-16 09:25:06

by Christophe Leroy

[permalink] [raw]
Subject: [PATCH v2 2/2] powerpc/83xx: map IMMR with a BAT.

On mpc83xx with a QE, IMMR is 2Mbytes and aligned on 2Mbytes boundarie.
On mpc83xx without a QE, IMMR is 1Mbyte and 1Mbyte aligned.

Each driver will map a part of it to access the registers it needs.
Some drivers will map the same part of IMMR as other drivers.

In order to reduce TLB misses, map the full IMMR with a BAT. If it is
2Mbytes aligned, map 2Mbytes. If there is no QE, the upper part will
remain unused, but it doesn't harm as it is mapped as guarded memory.

When the IMMR is not aligned on a 2Mbytes boundarie, only map 1Mbyte.

Signed-off-by: Christophe Leroy <[email protected]>

---
v2:
- use a fixmap area instead of playing with ioremap_bot
- always map 2M unless IMMRBAR is only 1M aligned
---
arch/powerpc/include/asm/fixmap.h | 8 ++++++++
arch/powerpc/platforms/83xx/misc.c | 11 +++++++++++
2 files changed, 19 insertions(+)

diff --git a/arch/powerpc/include/asm/fixmap.h b/arch/powerpc/include/asm/fixmap.h
index 0cfc365d814b..79c3aa55f43d 100644
--- a/arch/powerpc/include/asm/fixmap.h
+++ b/arch/powerpc/include/asm/fixmap.h
@@ -15,6 +15,7 @@
#define _ASM_FIXMAP_H

#ifndef __ASSEMBLY__
+#include <linux/sizes.h>
#include <asm/page.h>
#include <asm/pgtable.h>
#ifdef CONFIG_HIGHMEM
@@ -63,6 +64,13 @@ enum fixed_addresses {
FIX_IMMR_BASE = __ALIGN_MASK(FIX_IMMR_START, FIX_IMMR_SIZE - 1) - 1 +
FIX_IMMR_SIZE,
#endif
+#ifdef CONFIG_PPC_83xx
+ /* For IMMR we need an aligned 2M area */
+#define FIX_IMMR_SIZE (SZ_2M / PAGE_SIZE)
+ FIX_IMMR_START,
+ FIX_IMMR_BASE = __ALIGN_MASK(FIX_IMMR_START, FIX_IMMR_SIZE - 1) - 1 +
+ FIX_IMMR_SIZE,
+#endif
/* FIX_PCIE_MCFG, */
__end_of_fixed_addresses
};
diff --git a/arch/powerpc/platforms/83xx/misc.c b/arch/powerpc/platforms/83xx/misc.c
index f46d7bf3b140..d08216e2002d 100644
--- a/arch/powerpc/platforms/83xx/misc.c
+++ b/arch/powerpc/platforms/83xx/misc.c
@@ -18,6 +18,8 @@
#include <sysdev/fsl_soc.h>
#include <sysdev/fsl_pci.h>

+#include <mm/mmu_decl.h>
+
#include "mpc83xx.h"

static __be32 __iomem *restart_reg_base;
@@ -145,6 +147,15 @@ void __init mpc83xx_setup_arch(void)
if (ppc_md.progress)
ppc_md.progress("mpc83xx_setup_arch()", 0);

+ if (!__map_without_bats) {
+ phys_addr_t immrbase = get_immrbase();
+ int immrsize = IS_ALIGNED(immrbase, SZ_2M) ? SZ_2M : SZ_1M;
+ unsigned long va = __fix_to_virt(FIX_IMMR_BASE);
+
+ setbat(-1, va, immrbase, immrsize, PAGE_KERNEL_NCG);
+ update_bats();
+ }
+
mpc83xx_setup_pci();
}

--
2.13.3

2019-09-16 21:31:15

by Crystal Wood

[permalink] [raw]
Subject: Re: [PATCH v2 2/2] powerpc/83xx: map IMMR with a BAT.

On Mon, 2019-09-16 at 06:42 +0000, Christophe Leroy wrote:
> @@ -145,6 +147,15 @@ void __init mpc83xx_setup_arch(void)
> if (ppc_md.progress)
> ppc_md.progress("mpc83xx_setup_arch()", 0);
>
> + if (!__map_without_bats) {
> + phys_addr_t immrbase = get_immrbase();
> + int immrsize = IS_ALIGNED(immrbase, SZ_2M) ? SZ_2M : SZ_1M;
> + unsigned long va = __fix_to_virt(FIX_IMMR_BASE);

Why __fix_to_virt() and not fix_to_virt()?

-Scott


2019-09-17 06:37:29

by Christophe Leroy

[permalink] [raw]
Subject: Re: [PATCH v2 2/2] powerpc/83xx: map IMMR with a BAT.



Le 16/09/2019 à 17:04, Scott Wood a écrit :
> On Mon, 2019-09-16 at 06:42 +0000, Christophe Leroy wrote:
>> @@ -145,6 +147,15 @@ void __init mpc83xx_setup_arch(void)
>> if (ppc_md.progress)
>> ppc_md.progress("mpc83xx_setup_arch()", 0);
>>
>> + if (!__map_without_bats) {
>> + phys_addr_t immrbase = get_immrbase();
>> + int immrsize = IS_ALIGNED(immrbase, SZ_2M) ? SZ_2M : SZ_1M;
>> + unsigned long va = __fix_to_virt(FIX_IMMR_BASE);
>
> Why __fix_to_virt() and not fix_to_virt()?
>

Euh ... because I copy/pasted it from
/arch/powerpc/include/asm/nohash/32/mmu-8xx.h

But yes I can do fix_to_virt() instead.

Christophe