From: ChiaEn Wu <[email protected]>
This patch series add Mediatek MT6370 PMIC support. The MT6370 is a
highly-integrated smart power management IC, which includes a single
cell Li-Ion/Li-Polymer switching battery charger, a USB
Type-C & Power Delivery (PD) controller, dual Flash LED current sources,
a RGB LED driver, a backlight WLED driver, a display bias driver and a
general LDO for portable devices.
Among with this we took some changes and refined the device tree files to
comply with DT specifications.
Thank you,
ChiaEn Wu
---
Changes in v3:
- Remove ADC ABI file, which is added in v2 Patch 7
- In patch 02/14:
- Add items and remove maxItems of io-channels
- Add io-channel-names and describe each item
- Add "unevaluatedProperties: false" in "usb-otg-vbus-regulator"
- Rename "enable-gpio" to "enable-gpios" in "usb-otg-vbus-regulator"
- In patch 03/14:
- Use leds-class-multicolor.yaml instead of common.yaml.
- Split multi-led and led node.
- Add subdevice "led" in "multi-led".
- In patch 04/14:
- Remove the description of enum.
- In patch 05/14:
- Rename "mediatek,bled-pwm-hys-input-threshold-steps" to
"mediatek,bled-pwm-hys-input-th-steps"
- Refine "bled-pwm-hys-input-th-steps", "bled-ovp-microvolt",
"bled-ocp-microamp" enum values
- In patch 06/14:
- Use " in entire patchset
- Refine ADC description
- Rename "enable-gpio" to "enable-gpios" in "regualtor"
- Change "/schemas/" to "../" in every reference of all MT6370 modules
- In patch 07/14:
- Refine Kconfig help text
- Refine error message of unknown vendor ID in
mt6370_check_vendor_info()
- Refine return value handling of mt6370_regmap_read()
- Refine all probe error by using dev_err_probe()
- Refine "bank_idx" and "bank_addr" in mt6370_regmap_read() and
mt6370_regmap_write()
- Add "#define VENID*" and drop the comments in
mt6370_check_vendor_info()
- Drop "MFD" in MODULE_DESCRIPTION()
- In patch 09/14:
- Refine Kconfig help text
- In patch 10/14:
- Refine Kconfig help text
- Refine all channel value in read_scale()
a. current: uA --> mA
b. voltage: uV --> mV
c. temperature: degrees Celsius --> milli degrees Celsius
- Add "default:" condition of switch statement in read_scale() and read_raw()
- Add error message for reading ADC register failed
- Add the comment for adc_lock
- Add <linux/mod_devicetable.h> header file for struct of_device_id
- Replace "adc" text with "ADC" in all of the error messages
- In patch 12/14:
- Refine the grammer of the Kconfig.
- Change reg mode to the const current mode.
- In patch 14/14:
- Refine bool properties parsing (pwm-enable, ovp-shutdown, ocp-shutdown) in DT
parsing function
- Refine u32 and u8 properties parsing (pwm-hys-input-th-steps, ovp-microvolt,
ocp-microamp), from using register value to using actual value
- Refine error string of "channle-use" parsing failed
- Refine Kconfig help text
Changes in v2:
- In patch 01/15:
- Add "unevaluatedProperties: false".
- Delete "DT bindings".
- Refine the description to fit in 80 columns.
- Skip the connector description.
- In patch 02/15:
- Refine items description of interrupt-name
- Rename "usb-otg-vbus" to "usb-otg-vbus-regulator"
- Add constraint properties for ADC
- In patch 03/15:
- Skip not useful description of "^(multi-)?led@[0-3]$"
and reg.
- Due to the dependency, remove the mention of mfd
document directory.
- Delete Soft-start property. In design aspect, we think
soft-restart should always be enabled, our new chip
has deleted the related setting register , also, we don’t
allow user adjust this parameter in this chip.
- Refine the commit message.
- In patch 04/15:
- Skip not useful description of "^led@[0-1]$" and reg.
- Add apace after '#'.
- Refine the commit message.
- In patch 05/15:
- Remove "binding documentation" in subject title
- Refine description of mt6370 backlight binding
document
- Refine properties name(bled-pwm-hys-input-bit,
bled-ovp-microvolt, bled-ocp-microamp) and their
description
- In patch 06/15:
- Refine ADC and Regulator descriptions
- Refine include header usage in example
- Refine node name to generic node name("pmic@34")
- Refine led example indentation
- Refine license of mediatek,mt6370_adc.h
- Rename the dts example from IRQ define to number.
- Remove mediatek,mt6370.h
- In patch 07/15:
- Add ABI documentation for mt6370 non-standard ADC
sysfs interfaces.
- In patch 08/15:
- Add all IRQ define into mt6370.c.
- Refine include header usage
- In patch 09/15:
- No changes.
- In patch 10/15:
- Use 'gpiod_get_from_of_node' to replace
'fwnode_gpiod_get_index'.
- In patch 11/15:
- Refine Kconfig mt6370 help text
- Refine mask&shift to FIELD_PREP()
- Refine mutex lock name ("lock" -> "adc_lock")
- Refine mt6370_adc_read_scale()
- Refine mt6370_adc_read_offset()
- Refine mt6370_channel_labels[] by using enum to index
chan spec
- Refine MT6370_ADC_CHAN()
- Refine indio_dev->name
- Remove useless include header files
- In patch 12/15:
- Refine mt6370_chg_otg_rdesc.of_match
("mt6370,otg-vbus" -> "usb-otg-vbus-regulator") to match
DT binding
- In patch 13/15:
- Refine Kconfig description.
- Remove include "linux/of.h" and use
"linux/mod_devicetable.h".
- Place a comma for the last element of the const
unsigned int array.
- Add a comment line for the mutex 'lock'.
- In probe function, use 'dev_err_probe' in some
judgement to reduce the LOC.
- Refine include header usage.
BIT/GENMASK -> linux/bits.h
FIELD_GET -> linux/bitfield.h
- In patch 14/15:
- Add blank line.
- Replace container_of() with to_mt6370_led() .
- Refine description of ramping.
- Refine the mt6370_init_common_properties function.
- Refine the probe return.
- In patch 15/15:
- Refine MT6370 help text in Kconfig
- Refine DT Parse function
- Remove useless enum
- Add comment for 6372 backward compatible in
bl_update_status() and
check_vendor_info()
- Using dev_err_probe(); insteads dev_err()&return; in
the probe()
Alice Chen (2):
dt-bindings: leds: Add Mediatek MT6370 flashlight
leds: flashlight: mt6370: Add Mediatek MT6370 flashlight support
ChiYuan Huang (8):
dt-bindings: usb: Add Mediatek MT6370 TCPC
dt-bindings: leds: mt6370: Add Mediatek mt6370 current sink type LED
indicator
dt-bindings: backlight: Add Mediatek MT6370 backlight
dt-bindings: mfd: Add Mediatek MT6370
mfd: mt6370: Add Mediatek MT6370 support
usb: typec: tcpci_mt6370: Add Mediatek MT6370 tcpci driver
regulator: mt6370: Add mt6370 DisplayBias and VibLDO support
leds: mt6370: Add Mediatek MT6370 current sink type LED Indicator
support
ChiaEn Wu (4):
dt-bindings: power: supply: Add Mediatek MT6370 Charger
iio: adc: mt6370: Add Mediatek MT6370 support
power: supply: mt6370: Add Mediatek MT6370 charger driver
video: backlight: mt6370: Add Mediatek MT6370 support
.../leds/backlight/mediatek,mt6370-backlight.yaml | 92 ++
.../bindings/leds/mediatek,mt6370-flashlight.yaml | 41 +
.../bindings/leds/mediatek,mt6370-indicator.yaml | 77 ++
.../devicetree/bindings/mfd/mediatek,mt6370.yaml | 280 +++++
.../power/supply/mediatek,mt6370-charger.yaml | 87 ++
.../bindings/usb/mediatek,mt6370-tcpc.yaml | 36 +
drivers/iio/adc/Kconfig | 9 +
drivers/iio/adc/Makefile | 1 +
drivers/iio/adc/mt6370-adc.c | 275 +++++
drivers/leds/Kconfig | 11 +
drivers/leds/Makefile | 1 +
drivers/leds/flash/Kconfig | 9 +
drivers/leds/flash/Makefile | 1 +
drivers/leds/flash/leds-mt6370-flash.c | 657 ++++++++++++
drivers/leds/leds-mt6370.c | 989 +++++++++++++++++
drivers/mfd/Kconfig | 13 +
drivers/mfd/Makefile | 1 +
drivers/mfd/mt6370.c | 358 +++++++
drivers/power/supply/Kconfig | 11 +
drivers/power/supply/Makefile | 1 +
drivers/power/supply/mt6370-charger.c | 1132 ++++++++++++++++++++
drivers/regulator/Kconfig | 8 +
drivers/regulator/Makefile | 1 +
drivers/regulator/mt6370-regulator.c | 388 +++++++
drivers/usb/typec/tcpm/Kconfig | 8 +
drivers/usb/typec/tcpm/Makefile | 1 +
drivers/usb/typec/tcpm/tcpci_mt6370.c | 212 ++++
drivers/video/backlight/Kconfig | 9 +
drivers/video/backlight/Makefile | 1 +
drivers/video/backlight/mt6370-backlight.c | 346 ++++++
include/dt-bindings/iio/adc/mediatek,mt6370_adc.h | 18 +
31 files changed, 5074 insertions(+)
create mode 100644 Documentation/devicetree/bindings/leds/backlight/mediatek,mt6370-backlight.yaml
create mode 100644 Documentation/devicetree/bindings/leds/mediatek,mt6370-flashlight.yaml
create mode 100644 Documentation/devicetree/bindings/leds/mediatek,mt6370-indicator.yaml
create mode 100644 Documentation/devicetree/bindings/mfd/mediatek,mt6370.yaml
create mode 100644 Documentation/devicetree/bindings/power/supply/mediatek,mt6370-charger.yaml
create mode 100644 Documentation/devicetree/bindings/usb/mediatek,mt6370-tcpc.yaml
create mode 100644 drivers/iio/adc/mt6370-adc.c
create mode 100644 drivers/leds/flash/leds-mt6370-flash.c
create mode 100644 drivers/leds/leds-mt6370.c
create mode 100644 drivers/mfd/mt6370.c
create mode 100644 drivers/power/supply/mt6370-charger.c
create mode 100644 drivers/regulator/mt6370-regulator.c
create mode 100644 drivers/usb/typec/tcpm/tcpci_mt6370.c
create mode 100644 drivers/video/backlight/mt6370-backlight.c
create mode 100644 include/dt-bindings/iio/adc/mediatek,mt6370_adc.h
--
2.7.4
From: ChiYuan Huang <[email protected]>
Add Mediatek mt6370 current sink type LED indicator binding documentation.
Signed-off-by: ChiYuan Huang <[email protected]>
---
v3
- Use leds-class-multicolor.yaml instead of common.yaml.
- Split multi-led and led node.
- Add subdevice "led" in "multi-led".
---
.../bindings/leds/mediatek,mt6370-indicator.yaml | 77 ++++++++++++++++++++++
1 file changed, 77 insertions(+)
create mode 100644 Documentation/devicetree/bindings/leds/mediatek,mt6370-indicator.yaml
diff --git a/Documentation/devicetree/bindings/leds/mediatek,mt6370-indicator.yaml b/Documentation/devicetree/bindings/leds/mediatek,mt6370-indicator.yaml
new file mode 100644
index 0000000..45030f3
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/mediatek,mt6370-indicator.yaml
@@ -0,0 +1,77 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/mediatek,mt6370-indicator.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: LED driver for MT6370 PMIC from MediaTek Integrated.
+
+maintainers:
+ - Alice Chen <[email protected]>
+
+description: |
+ This module is part of the MT6370 MFD device.
+ Add MT6370 LED driver include 4-channel RGB LED support Register/PWM/Breath Mode
+
+allOf:
+ - $ref: leds-class-multicolor.yaml#
+
+properties:
+ compatible:
+ const: mediatek,mt6370-indicator
+
+ "#address-cells":
+ const: 1
+
+ "#size-cells":
+ const: 0
+
+patternProperties:
+ "^multi-led@[0-3]$":
+ type: object
+
+ properties:
+ reg:
+ enum: [0, 1, 2, 3]
+
+ "#address-cells":
+ const: 1
+
+ "#size-cells":
+ const: 0
+
+ patternProperties:
+ "^led@[0-2]$":
+ type: object
+ $ref: common.yaml#
+ unevaluatedProperties: false
+
+ required:
+ - reg
+ - color
+
+ required:
+ - reg
+ - color
+ - "#address-cells"
+ - "#size-cells"
+
+ "^led@[0-3]$":
+ type: object
+ $ref: common.yaml#
+ unevaluatedProperties: false
+
+ properties:
+ reg:
+ enum: [0, 1, 2, 3]
+
+ required:
+ - reg
+ - color
+
+required:
+ - compatible
+ - "#address-cells"
+ - "#size-cells"
+
+additionalProperties: false
--
2.7.4
From: Alice Chen <[email protected]>
Add Mediatek MT6370 flashlight binding documentation.
Signed-off-by: Alice Chen <[email protected]>
---
v3
- Remove the description of enum.
---
.../bindings/leds/mediatek,mt6370-flashlight.yaml | 41 ++++++++++++++++++++++
1 file changed, 41 insertions(+)
create mode 100644 Documentation/devicetree/bindings/leds/mediatek,mt6370-flashlight.yaml
diff --git a/Documentation/devicetree/bindings/leds/mediatek,mt6370-flashlight.yaml b/Documentation/devicetree/bindings/leds/mediatek,mt6370-flashlight.yaml
new file mode 100644
index 0000000..e9d02ed
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/mediatek,mt6370-flashlight.yaml
@@ -0,0 +1,41 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/mediatek,mt6370-flashlight.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Flash LED driver for MT6370 PMIC from MediaTek Integrated.
+
+maintainers:
+ - Alice Chen <[email protected]>
+
+description: |
+ This module is part of the MT6370 MFD device.
+ Add MT6370 flash LED driver include 2-channel flash LED support Torch/Strobe Mode.
+
+properties:
+ compatible:
+ const: mediatek,mt6370-flashlight
+
+ "#address-cells":
+ const: 1
+
+ "#size-cells":
+ const: 0
+
+patternProperties:
+ "^led@[0-1]$":
+ type: object
+ $ref: common.yaml#
+ unevaluatedProperties: false
+
+ properties:
+ reg:
+ enum: [0, 1]
+
+required:
+ - compatible
+ - "#address-cells"
+ - "#size-cells"
+
+additionalProperties: false
--
2.7.4
From: ChiaEn Wu <[email protected]>
Add Mediatek MT6370 charger driver.
Signed-off-by: ChiaEn Wu <[email protected]>
---
drivers/power/supply/Kconfig | 11 +
drivers/power/supply/Makefile | 1 +
drivers/power/supply/mt6370-charger.c | 1132 +++++++++++++++++++++++++++++++++
3 files changed, 1144 insertions(+)
create mode 100644 drivers/power/supply/mt6370-charger.c
diff --git a/drivers/power/supply/Kconfig b/drivers/power/supply/Kconfig
index 1aa8323..54d8c3a 100644
--- a/drivers/power/supply/Kconfig
+++ b/drivers/power/supply/Kconfig
@@ -619,6 +619,17 @@ config CHARGER_MT6360
Average Input Current Regulation, Battery Temperature Sensing,
Over-Temperature Protection, DPDM Detection for BC1.2.
+config CHARGER_MT6370
+ tristate "Mediatek MT6370 Charger Driver"
+ depends on MFD_MT6370
+ depends on REGULATOR
+ select LINEAR_RANGES
+ help
+ Say Y here to enable MT6370 Charger Part.
+ The device supports High-Accuracy Voltage/Current Regulation,
+ Average Input Current Regulation, Battery Temperature Sensing,
+ Over-Temperature Protection, DPDM Detection for BC1.2.
+
config CHARGER_QCOM_SMBB
tristate "Qualcomm Switch-Mode Battery Charger and Boost"
depends on MFD_SPMI_PMIC || COMPILE_TEST
diff --git a/drivers/power/supply/Makefile b/drivers/power/supply/Makefile
index 7f02f36..8c95276 100644
--- a/drivers/power/supply/Makefile
+++ b/drivers/power/supply/Makefile
@@ -82,6 +82,7 @@ obj-$(CONFIG_CHARGER_MAX8997) += max8997_charger.o
obj-$(CONFIG_CHARGER_MAX8998) += max8998_charger.o
obj-$(CONFIG_CHARGER_MP2629) += mp2629_charger.o
obj-$(CONFIG_CHARGER_MT6360) += mt6360_charger.o
+obj-$(CONFIG_CHARGER_MT6370) += mt6370-charger.o
obj-$(CONFIG_CHARGER_QCOM_SMBB) += qcom_smbb.o
obj-$(CONFIG_CHARGER_BQ2415X) += bq2415x_charger.o
obj-$(CONFIG_CHARGER_BQ24190) += bq24190_charger.o
diff --git a/drivers/power/supply/mt6370-charger.c b/drivers/power/supply/mt6370-charger.c
new file mode 100644
index 0000000..539da62d
--- /dev/null
+++ b/drivers/power/supply/mt6370-charger.c
@@ -0,0 +1,1132 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include <dt-bindings/iio/adc/mediatek,mt6370_adc.h>
+#include <linux/atomic.h>
+#include <linux/bitfield.h>
+#include <linux/bits.h>
+#include <linux/gpio/consumer.h>
+#include <linux/iio/consumer.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/power_supply.h>
+#include <linux/regmap.h>
+#include <linux/regulator/driver.h>
+#include <linux/workqueue.h>
+
+#define MT6370_REG_CHG_CTRL1 0x111
+#define MT6370_REG_CHG_CTRL2 0x112
+#define MT6370_REG_CHG_CTRL3 0x113
+#define MT6370_REG_CHG_CTRL4 0x114
+#define MT6370_REG_CHG_CTRL5 0x115
+#define MT6370_REG_CHG_CTRL6 0x116
+#define MT6370_REG_CHG_CTRL7 0x117
+#define MT6370_REG_CHG_CTRL8 0x118
+#define MT6370_REG_CHG_CTRL9 0x119
+#define MT6370_REG_CHG_CTRL10 0x11A
+#define MT6370_REG_DEVICE_TYPE 0x122
+#define MT6370_REG_USB_STATUS1 0x127
+#define MT6370_REG_CHG_STAT 0x14A
+#define MT6370_REG_FLED_EN 0x17E
+#define MT6370_REG_CHG_STAT1 0X1D0
+#define MT6370_REG_OVPCTRL_STAT 0x1D8
+
+#define MT6370_VOBST_MASK GENMASK(7, 2)
+#define MT6370_OTG_PIN_EN_MASK BIT(1)
+#define MT6370_OPA_MODE_MASK BIT(0)
+#define MT6370_OTG_OC_MASK GENMASK(2, 0)
+
+#define MT6370_MIVR_IBUS_TH 100000 /* 100 mA */
+
+enum mt6370_chg_reg_field {
+ /* MT6370_REG_CHG_CTRL2 */
+ F_IINLMTSEL, F_CFO_EN, F_CHG_EN,
+ /* MT6370_REG_CHG_CTRL3 */
+ F_IAICR, F_AICR_EN, F_ILIM_EN,
+ /* MT6370_REG_CHG_CTRL4 */
+ F_VOREG,
+ /* MT6370_REG_CHG_CTRL5 */
+ F_VOBST,
+ /* MT6370_REG_CHG_CTRL6 */
+ F_VMIVR,
+ /* MT6370_REG_CHG_CTRL7 */
+ F_ICHG,
+ /* MT6370_REG_CHG_CTRL8 */
+ F_IPREC,
+ /* MT6370_REG_CHG_CTRL9 */
+ F_IEOC,
+ /* MT6370_REG_DEVICE_TYPE */
+ F_USBCHGEN,
+ /* MT6370_REG_USB_STATUS1 */
+ F_USB_STAT, F_CHGDET,
+ /* MT6370_REG_CHG_STAT */
+ F_CHG_STAT, F_BOOST_STAT, F_VBAT_LVL,
+ /* MT6370_REG_FLED_EN */
+ F_FL_STROBE,
+ /* MT6370_REG_CHG_STAT1 */
+ F_CHG_MIVR_STAT,
+ /* MT6370_REG_OVPCTRL_STAT */
+ F_UVP_D_STAT,
+ F_MAX,
+};
+
+struct mt6370_priv {
+ struct device *dev;
+ struct iio_channel *iio_adcs;
+ struct mutex attach_lock;
+ struct power_supply *psy;
+ struct power_supply_desc *psy_desc;
+ struct regmap *regmap;
+ struct regmap_field *rmap_fields[F_MAX];
+ struct regulator_dev *rdev;
+ struct workqueue_struct *wq;
+ struct work_struct bc12_work;
+ struct delayed_work mivr_dwork;
+ atomic_t attach;
+ int psy_usb_type;
+ bool pwr_rdy;
+};
+
+enum mt6370_usb_status {
+ MT6370_USB_STAT_NO_VBUS = 0,
+ MT6370_USB_STAT_VBUS_FLOW_IS_UNDER_GOING,
+ MT6370_USB_STAT_SDP,
+ MT6370_USB_STAT_SDP_NSTD,
+ MT6370_USB_STAT_DCP,
+ MT6370_USB_STAT_CDP,
+ MT6370_USB_STAT_MAX,
+};
+
+struct mt6370_chg_range {
+ u32 min;
+ u32 max;
+ u16 step;
+ u8 offset;
+ const u32 *table;
+ u16 num_table;
+ bool round_up;
+};
+
+struct mt6370_chg_field {
+ const char *name;
+ const struct mt6370_chg_range *range;
+ struct reg_field field;
+};
+
+static const u32 mt6370_chg_otg_oc_ma[] = {
+ 500000, 700000, 1100000, 1300000, 1800000, 2100000, 2400000,
+};
+
+#define MT6370_CHG_RANGE(_min, _max, _step, _offset, _ru) \
+{ \
+ .min = _min, \
+ .max = _max, \
+ .step = _step, \
+ .offset = _offset, \
+ .round_up = _ru, \
+}
+
+#define MT6370_CHG_RANGE_T(_table, _ru) \
+{ \
+ .table = _table, \
+ .num_table = ARRAY_SIZE(_table), \
+ .round_up = _ru, \
+}
+
+static const struct mt6370_chg_range mt6370_chg_ranges[F_MAX] = {
+ [F_IAICR] = MT6370_CHG_RANGE(100, 3250, 50, 0, false),
+ [F_VOREG] = MT6370_CHG_RANGE(3900, 4710, 10, 0, false),
+ [F_VOBST] = MT6370_CHG_RANGE(4425, 5825, 25, 0, false),
+ [F_VMIVR] = MT6370_CHG_RANGE(3900, 13400, 100, 0, true),
+ [F_ICHG] = MT6370_CHG_RANGE(900, 5000, 100, 8, false),
+ [F_IPREC] = MT6370_CHG_RANGE(100, 850, 50, 0, false),
+ [F_IEOC] = MT6370_CHG_RANGE(100, 850, 50, 0, false),
+};
+
+#define MT6370_CHG_FIELD_RANGE(_fd, _reg, _lsb, _msb, _range) \
+[_fd] = { \
+ .name = #_fd, \
+ .range = _range ? &mt6370_chg_ranges[_fd] : NULL, \
+ .field = REG_FIELD(_reg, _lsb, _msb), \
+}
+
+#define MT6370_CHG_FIELD(_fd, _reg, _lsb, _msb) \
+ MT6370_CHG_FIELD_RANGE(_fd, _reg, _lsb, _msb, (_msb > _lsb))
+
+static const struct mt6370_chg_field mt6370_chg_fields[F_MAX] = {
+ MT6370_CHG_FIELD_RANGE(F_IINLMTSEL, MT6370_REG_CHG_CTRL2, 2, 3, false),
+ MT6370_CHG_FIELD(F_CFO_EN, MT6370_REG_CHG_CTRL2, 1, 1),
+ MT6370_CHG_FIELD(F_CHG_EN, MT6370_REG_CHG_CTRL2, 0, 0),
+ MT6370_CHG_FIELD(F_IAICR, MT6370_REG_CHG_CTRL3, 2, 7),
+ MT6370_CHG_FIELD(F_AICR_EN, MT6370_REG_CHG_CTRL3, 1, 1),
+ MT6370_CHG_FIELD(F_ILIM_EN, MT6370_REG_CHG_CTRL3, 0, 0),
+ MT6370_CHG_FIELD(F_VOREG, MT6370_REG_CHG_CTRL4, 1, 7),
+ MT6370_CHG_FIELD(F_VOBST, MT6370_REG_CHG_CTRL5, 2, 7),
+ MT6370_CHG_FIELD(F_VMIVR, MT6370_REG_CHG_CTRL6, 1, 7),
+ MT6370_CHG_FIELD(F_ICHG, MT6370_REG_CHG_CTRL7, 2, 7),
+ MT6370_CHG_FIELD(F_IPREC, MT6370_REG_CHG_CTRL8, 0, 3),
+ MT6370_CHG_FIELD(F_IEOC, MT6370_REG_CHG_CTRL9, 4, 7),
+ MT6370_CHG_FIELD(F_USBCHGEN, MT6370_REG_DEVICE_TYPE, 7, 7),
+ MT6370_CHG_FIELD_RANGE(F_USB_STAT, MT6370_REG_USB_STATUS1, 4, 6, false),
+ MT6370_CHG_FIELD(F_CHGDET, MT6370_REG_USB_STATUS1, 3, 3),
+ MT6370_CHG_FIELD_RANGE(F_CHG_STAT, MT6370_REG_CHG_STAT, 6, 7, false),
+ MT6370_CHG_FIELD(F_BOOST_STAT, MT6370_REG_CHG_STAT, 3, 3),
+ MT6370_CHG_FIELD(F_VBAT_LVL, MT6370_REG_CHG_STAT, 5, 5),
+ MT6370_CHG_FIELD(F_FL_STROBE, MT6370_REG_FLED_EN, 2, 2),
+ MT6370_CHG_FIELD(F_CHG_MIVR_STAT, MT6370_REG_CHG_STAT1, 6, 6),
+ MT6370_CHG_FIELD(F_UVP_D_STAT, MT6370_REG_OVPCTRL_STAT, 4, 4),
+};
+
+static inline u32 mt6370_chg_val_to_reg(const struct mt6370_chg_range *range,
+ u32 val)
+{
+ int i;
+ u8 reg;
+
+ if (!range)
+ return val;
+
+ if (range->table) {
+ if (val <= range->table[0])
+ return 0;
+
+ for (i = 1; i < range->num_table - 1; i++) {
+ if (val == range->table[i])
+ return i;
+ if (val > range->table[i] &&
+ val < range->table[i + 1])
+ return range->round_up ? i + 1 : i;
+ }
+
+ return range->num_table - 1;
+ }
+
+ if (val <= range->min)
+ reg = 0;
+ else if (val >= range->max)
+ reg = (range->max - range->min) / range->step;
+ else if (range->round_up)
+ reg = DIV_ROUND_UP(val - range->min, range->step);
+ else
+ reg = (val - range->min) / range->step;
+
+ return reg + range->offset;
+}
+
+static inline u32 mt6370_chg_reg_to_val(const struct mt6370_chg_range *range,
+ u8 reg)
+{
+ if (!range)
+ return reg;
+
+ return range->table ? range->table[reg] :
+ range->min + range->step * (reg - range->offset);
+}
+
+static inline int mt6370_chg_field_get(struct mt6370_priv *priv,
+ enum mt6370_chg_reg_field fd, u32 *val)
+{
+ int ret;
+ u32 reg_val;
+
+ ret = regmap_field_read(priv->rmap_fields[fd], ®_val);
+ if (ret < 0)
+ return ret;
+
+ *val = mt6370_chg_reg_to_val(mt6370_chg_fields[fd].range, reg_val);
+
+ return 0;
+}
+
+static inline int mt6370_chg_field_set(struct mt6370_priv *priv,
+ enum mt6370_chg_reg_field fd, u32 val)
+{
+ val = mt6370_chg_val_to_reg(mt6370_chg_fields[fd].range, val);
+
+ return regmap_field_write(priv->rmap_fields[fd], val);
+}
+
+enum {
+ MT6370_CHG_STAT_READY = 0,
+ MT6370_CHG_STAT_CHARGE_IN_PROGRESS,
+ MT6370_CHG_STAT_DONE,
+ MT6370_CHG_STAT_FAULT,
+ MT6370_CHG_STAT_MAX,
+};
+
+enum {
+ MT6370_ATTACH_STAT_DETACH = 0,
+ MT6370_ATTACH_STAT_ATTACH_BC12_NOT_DONE,
+ MT6370_ATTACH_STAT_ATTACH_BC12_DONE,
+ MT6370_ATTACH_STAT_ATTACH_MAX,
+};
+
+static int mt6370_chg_otg_of_parse_cb(struct device_node *of,
+ const struct regulator_desc *rdesc,
+ struct regulator_config *rcfg)
+{
+ struct mt6370_priv *priv = rcfg->driver_data;
+ unsigned int val;
+ int ret = 0;
+
+ rcfg->ena_gpiod = fwnode_gpiod_get_index(of_fwnode_handle(of),
+ "enable", 0,
+ GPIOD_OUT_LOW |
+ GPIOD_FLAGS_BIT_NONEXCLUSIVE,
+ rdesc->name);
+ if (IS_ERR(rcfg->ena_gpiod)) {
+ dev_err(priv->dev, "Failed to requeset OTG EN Pin\n");
+ rcfg->ena_gpiod = NULL;
+ } else {
+ val = MT6370_OPA_MODE_MASK | MT6370_OTG_PIN_EN_MASK;
+ ret = regmap_update_bits(priv->regmap, MT6370_REG_CHG_CTRL1,
+ val, val);
+ if (ret)
+ dev_err(priv->dev, "Failed to set otg bits\n");
+ }
+
+ return ret;
+}
+
+static void mt6370_chg_bc12_work_func(struct work_struct *work)
+{
+ struct mt6370_priv *priv = container_of(work, struct mt6370_priv,
+ bc12_work);
+ int ret, attach;
+ bool rpt_psy = false;
+ u32 usb_stat;
+
+ mutex_lock(&priv->attach_lock);
+ attach = atomic_read(&priv->attach);
+
+ switch (attach) {
+ case MT6370_ATTACH_STAT_DETACH:
+ usb_stat = 0;
+ break;
+ case MT6370_ATTACH_STAT_ATTACH_BC12_DONE:
+ ret = mt6370_chg_field_get(priv, F_USB_STAT, &usb_stat);
+ if (ret < 0) {
+ dev_err(priv->dev, "Failed to get USB status\n");
+ goto bc12_work_func_out;
+ }
+ break;
+ case MT6370_ATTACH_STAT_ATTACH_BC12_NOT_DONE:
+ ret = mt6370_chg_field_set(priv, F_USBCHGEN, attach);
+ if (ret < 0)
+ dev_err(priv->dev, "Failed to enable USB CHG EN\n");
+ goto bc12_work_func_out;
+ default:
+ dev_err(priv->dev, "Invalid attach state\n");
+ goto bc12_work_func_out;
+ }
+
+ rpt_psy = true;
+
+ switch (usb_stat) {
+ case MT6370_USB_STAT_SDP:
+ priv->psy_desc->type = POWER_SUPPLY_TYPE_USB;
+ priv->psy_usb_type = POWER_SUPPLY_USB_TYPE_SDP;
+ break;
+ case MT6370_USB_STAT_SDP_NSTD:
+ priv->psy_desc->type = POWER_SUPPLY_TYPE_USB;
+ priv->psy_usb_type = POWER_SUPPLY_USB_TYPE_DCP;
+ break;
+ case MT6370_USB_STAT_DCP:
+ priv->psy_desc->type = POWER_SUPPLY_TYPE_USB_DCP;
+ priv->psy_usb_type = POWER_SUPPLY_USB_TYPE_DCP;
+ break;
+ case MT6370_USB_STAT_CDP:
+ priv->psy_desc->type = POWER_SUPPLY_TYPE_USB_CDP;
+ priv->psy_usb_type = POWER_SUPPLY_USB_TYPE_CDP;
+ break;
+ case MT6370_USB_STAT_NO_VBUS:
+ case MT6370_USB_STAT_VBUS_FLOW_IS_UNDER_GOING:
+ default:
+ priv->psy_desc->type = POWER_SUPPLY_TYPE_USB;
+ priv->psy_usb_type = POWER_SUPPLY_USB_TYPE_UNKNOWN;
+ break;
+ }
+
+bc12_work_func_out:
+ mutex_unlock(&priv->attach_lock);
+
+ if (rpt_psy)
+ power_supply_changed(priv->psy);
+}
+
+static inline void mt6370_chg_enable_irq(struct mt6370_priv *priv,
+ const char *irq_name, bool en)
+{
+ int irq_num;
+ struct platform_device *pdev = to_platform_device(priv->dev);
+
+ irq_num = platform_get_irq_byname(pdev, irq_name);
+
+ if (irq_num < 0) {
+ dev_err(priv->dev, "Failed to get platform resource\n");
+ } else {
+ if (en)
+ enable_irq(irq_num);
+ else
+ disable_irq_nosync(irq_num);
+ }
+}
+
+static int mt6370_chg_toggle_cfo(struct mt6370_priv *priv)
+{
+ int ret;
+ u32 fl_strobe;
+
+ /* check if flash led in strobe mode */
+ ret = mt6370_chg_field_get(priv, F_FL_STROBE, &fl_strobe);
+ if (ret < 0) {
+ dev_err(priv->dev, "Failed to get FL_STROBE_EN\n");
+ goto toggle_cfo_exit;
+ }
+
+ if (fl_strobe) {
+ dev_err(priv->dev, "Flash led is still in strobe mode\n");
+ goto toggle_cfo_exit;
+ }
+
+ /* cfo off */
+ ret = mt6370_chg_field_set(priv, F_CFO_EN, 0);
+ if (ret < 0) {
+ dev_err(priv->dev, "Failed to disable CFO_EN\n");
+ goto toggle_cfo_exit;
+ }
+
+ /* cfo on */
+ ret = mt6370_chg_field_set(priv, F_CFO_EN, 1);
+ if (ret < 0) {
+ dev_err(priv->dev, "Failed to enable CFO_EN\n");
+ goto toggle_cfo_exit;
+ }
+
+toggle_cfo_exit:
+ return ret;
+}
+
+static int mt6370_chg_read_adc_chan(struct mt6370_priv *priv, unsigned int chan,
+ int *val)
+{
+ int ret;
+
+ if (chan >= MT6370_CHAN_MAX)
+ return -EINVAL;
+
+ ret = iio_read_channel_processed(&priv->iio_adcs[chan], val);
+ if (ret)
+ dev_err(priv->dev, "Failed to read adc\n");
+
+ return ret;
+}
+
+static void mt6370_chg_mivr_dwork_func(struct work_struct *work)
+{
+ struct mt6370_priv *priv = container_of(work, struct mt6370_priv,
+ mivr_dwork.work);
+ int ret;
+ u32 mivr_stat;
+ unsigned int ibus;
+
+ ret = mt6370_chg_field_get(priv, F_CHG_MIVR_STAT, &mivr_stat);
+ if (ret < 0) {
+ dev_err(priv->dev, "Failed to get mivr state\n");
+ goto mivr_handler_out;
+ }
+
+ if (!mivr_stat)
+ goto mivr_handler_out;
+
+ ret = mt6370_chg_read_adc_chan(priv, MT6370_CHAN_IBUS, &ibus);
+ if (ret) {
+ dev_err(priv->dev, "Failed to get ibus\n");
+ goto mivr_handler_out;
+ }
+
+ if (ibus < MT6370_MIVR_IBUS_TH) {
+ ret = mt6370_chg_toggle_cfo(priv);
+ if (ret)
+ dev_err(priv->dev, "Failed to toggle cfo\n");
+ }
+
+mivr_handler_out:
+ mt6370_chg_enable_irq(priv, "mivr", true);
+ pm_relax(priv->dev);
+}
+
+static void mt6370_chg_pwr_rdy_check(struct mt6370_priv *priv)
+{
+ int ret;
+ u32 pwr_rdy, otg_en;
+ union power_supply_propval val;
+
+ /* Check in otg mode or not */
+ ret = mt6370_chg_field_get(priv, F_BOOST_STAT, &otg_en);
+ if (ret < 0) {
+ dev_err(priv->dev, "Failed to get otg state\n");
+ return;
+ }
+
+ if (otg_en)
+ return;
+
+ ret = mt6370_chg_field_get(priv, F_UVP_D_STAT, &pwr_rdy);
+ if (ret < 0) {
+ dev_err(priv->dev, "Failed to get pwr_rdy state reg\n");
+ return;
+ }
+
+ val.intval = !pwr_rdy;
+
+ ret = power_supply_set_property(priv->psy, POWER_SUPPLY_PROP_ONLINE,
+ &val);
+ if (ret)
+ dev_err(priv->dev, "Failed to start attach/detach flow\n");
+}
+
+static int mt6370_chg_get_online(struct mt6370_priv *priv,
+ union power_supply_propval *val)
+{
+ mutex_lock(&priv->attach_lock);
+ val->intval = !!atomic_read(&priv->attach);
+ mutex_unlock(&priv->attach_lock);
+
+ return 0;
+}
+
+static int mt6370_chg_get_status(struct mt6370_priv *priv,
+ union power_supply_propval *val)
+{
+ int ret;
+ u32 chg_stat;
+
+ ret = mt6370_chg_get_online(priv, val);
+ if (!val->intval) {
+ val->intval = POWER_SUPPLY_STATUS_DISCHARGING;
+ return 0;
+ }
+
+ ret = mt6370_chg_field_get(priv, F_CHG_STAT, &chg_stat);
+ if (ret < 0)
+ return ret;
+
+ switch (chg_stat) {
+ case MT6370_CHG_STAT_READY:
+ case MT6370_CHG_STAT_FAULT:
+ val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING;
+ break;
+ case MT6370_CHG_STAT_CHARGE_IN_PROGRESS:
+ val->intval = POWER_SUPPLY_STATUS_CHARGING;
+ break;
+ case MT6370_CHG_STAT_DONE:
+ val->intval = POWER_SUPPLY_STATUS_FULL;
+ break;
+ default:
+ val->intval = POWER_SUPPLY_STATUS_UNKNOWN;
+ break;
+ }
+
+ return ret;
+}
+
+static int mt6370_chg_get_charge_type(struct mt6370_priv *priv,
+ union power_supply_propval *val)
+{
+ int type, ret;
+ u32 chg_stat, vbat_lvl;
+
+ ret = mt6370_chg_field_get(priv, F_CHG_STAT, &chg_stat);
+ if (ret < 0)
+ return ret;
+
+ ret = mt6370_chg_field_get(priv, F_VBAT_LVL, &vbat_lvl);
+ if (ret < 0)
+ return ret;
+
+ switch (chg_stat) {
+ case MT6370_CHG_STAT_CHARGE_IN_PROGRESS:
+ if (vbat_lvl)
+ type = POWER_SUPPLY_CHARGE_TYPE_FAST;
+ else
+ type = POWER_SUPPLY_CHARGE_TYPE_TRICKLE;
+ break;
+ case MT6370_CHG_STAT_READY:
+ case MT6370_CHG_STAT_DONE:
+ case MT6370_CHG_STAT_FAULT:
+ default:
+ type = POWER_SUPPLY_CHARGE_TYPE_NONE;
+ break;
+ }
+
+ val->intval = type;
+
+ return 0;
+}
+
+static int mt6370_chg_get_ichg(struct mt6370_priv *priv,
+ union power_supply_propval *val)
+{
+ return mt6370_chg_field_get(priv, F_ICHG, &val->intval);
+}
+
+static int mt6370_chg_get_max_ichg(struct mt6370_priv *priv,
+ union power_supply_propval *val)
+{
+ return mt6370_chg_ranges[F_ICHG].max;
+}
+
+static int mt6370_chg_get_cv(struct mt6370_priv *priv,
+ union power_supply_propval *val)
+{
+ return mt6370_chg_field_get(priv, F_VOREG, &val->intval);
+}
+
+static int mt6370_chg_get_max_cv(struct mt6370_priv *priv,
+ union power_supply_propval *val)
+{
+ return mt6370_chg_ranges[F_VOREG].max;
+}
+
+static int mt6370_chg_get_aicr(struct mt6370_priv *priv,
+ union power_supply_propval *val)
+{
+ return mt6370_chg_field_get(priv, F_IAICR, &val->intval);
+}
+
+static int mt6370_chg_get_mivr(struct mt6370_priv *priv,
+ union power_supply_propval *val)
+{
+ return mt6370_chg_field_get(priv, F_VMIVR, &val->intval);
+}
+
+static int mt6370_chg_get_iprechg(struct mt6370_priv *priv,
+ union power_supply_propval *val)
+{
+ return mt6370_chg_field_get(priv, F_IPREC, &val->intval);
+}
+
+static int mt6370_chg_get_ieoc(struct mt6370_priv *priv,
+ union power_supply_propval *val)
+{
+ return mt6370_chg_field_get(priv, F_IEOC, &val->intval);
+}
+
+static int mt6370_chg_set_online(struct mt6370_priv *priv,
+ const union power_supply_propval *val)
+{
+ int attach;
+ u32 pwr_rdy = !!val->intval;
+
+ mutex_lock(&priv->attach_lock);
+ attach = atomic_read(&priv->attach);
+ if (pwr_rdy == !!attach) {
+ dev_err(priv->dev, "pwr_rdy is same(%d)\n", pwr_rdy);
+ mutex_unlock(&priv->attach_lock);
+ return 0;
+ }
+
+ atomic_set(&priv->attach, pwr_rdy);
+ mutex_unlock(&priv->attach_lock);
+
+ if (!queue_work(priv->wq, &priv->bc12_work))
+ dev_err(priv->dev, "bc12 work has already queued\n");
+
+ return 0;
+
+}
+
+static int mt6370_chg_set_ichg(struct mt6370_priv *priv,
+ const union power_supply_propval *val)
+{
+ return mt6370_chg_field_set(priv, F_ICHG, val->intval);
+}
+
+static int mt6370_chg_set_cv(struct mt6370_priv *priv,
+ const union power_supply_propval *val)
+{
+ return mt6370_chg_field_set(priv, F_VOREG, val->intval);
+}
+
+static int mt6370_chg_set_aicr(struct mt6370_priv *priv,
+ const union power_supply_propval *val)
+{
+ return mt6370_chg_field_set(priv, F_IAICR, val->intval);
+}
+
+static int mt6370_chg_set_mivr(struct mt6370_priv *priv,
+ const union power_supply_propval *val)
+{
+ return mt6370_chg_field_set(priv, F_VMIVR, val->intval);
+}
+
+static int mt6370_chg_set_iprechg(struct mt6370_priv *priv,
+ const union power_supply_propval *val)
+{
+ return mt6370_chg_field_set(priv, F_IPREC, val->intval);
+}
+
+static int mt6370_chg_set_ieoc(struct mt6370_priv *priv,
+ const union power_supply_propval *val)
+{
+ return mt6370_chg_field_set(priv, F_IEOC, val->intval);
+}
+
+static int mt6370_chg_get_property(struct power_supply *psy,
+ enum power_supply_property psp,
+ union power_supply_propval *val)
+{
+ struct mt6370_priv *priv = power_supply_get_drvdata(psy);
+ int ret = 0;
+
+ switch (psp) {
+ case POWER_SUPPLY_PROP_ONLINE:
+ ret = mt6370_chg_get_online(priv, val);
+ break;
+ case POWER_SUPPLY_PROP_STATUS:
+ ret = mt6370_chg_get_status(priv, val);
+ break;
+ case POWER_SUPPLY_PROP_CHARGE_TYPE:
+ ret = mt6370_chg_get_charge_type(priv, val);
+ break;
+ case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT:
+ ret = mt6370_chg_get_ichg(priv, val);
+ break;
+ case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX:
+ ret = mt6370_chg_get_max_ichg(priv, val);
+ break;
+ case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE:
+ ret = mt6370_chg_get_cv(priv, val);
+ break;
+ case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX:
+ ret = mt6370_chg_get_max_cv(priv, val);
+ break;
+ case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT:
+ ret = mt6370_chg_get_aicr(priv, val);
+ break;
+ case POWER_SUPPLY_PROP_INPUT_VOLTAGE_LIMIT:
+ ret = mt6370_chg_get_mivr(priv, val);
+ break;
+ case POWER_SUPPLY_PROP_PRECHARGE_CURRENT:
+ ret = mt6370_chg_get_iprechg(priv, val);
+ break;
+ case POWER_SUPPLY_PROP_CHARGE_TERM_CURRENT:
+ ret = mt6370_chg_get_ieoc(priv, val);
+ break;
+ case POWER_SUPPLY_PROP_TYPE:
+ val->intval = priv->psy_desc->type;
+ break;
+ case POWER_SUPPLY_PROP_USB_TYPE:
+ val->intval = priv->psy_usb_type;
+ break;
+ default:
+ ret = -EINVAL;
+ break;
+ }
+
+ return ret;
+}
+
+static int mt6370_chg_set_property(struct power_supply *psy,
+ enum power_supply_property psp,
+ const union power_supply_propval *val)
+{
+ struct mt6370_priv *priv = power_supply_get_drvdata(psy);
+ int ret;
+
+ switch (psp) {
+ case POWER_SUPPLY_PROP_ONLINE:
+ ret = mt6370_chg_set_online(priv, val);
+ break;
+ case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT:
+ ret = mt6370_chg_set_ichg(priv, val);
+ break;
+ case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE:
+ ret = mt6370_chg_set_cv(priv, val);
+ break;
+ case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT:
+ ret = mt6370_chg_set_aicr(priv, val);
+ break;
+ case POWER_SUPPLY_PROP_INPUT_VOLTAGE_LIMIT:
+ ret = mt6370_chg_set_mivr(priv, val);
+ break;
+ case POWER_SUPPLY_PROP_PRECHARGE_CURRENT:
+ ret = mt6370_chg_set_iprechg(priv, val);
+ break;
+ case POWER_SUPPLY_PROP_CHARGE_TERM_CURRENT:
+ ret = mt6370_chg_set_ieoc(priv, val);
+ break;
+ default:
+ ret = -EINVAL;
+ }
+ return ret;
+}
+
+static int mt6370_chg_property_is_writeable(struct power_supply *psy,
+ enum power_supply_property psp)
+{
+ switch (psp) {
+ case POWER_SUPPLY_PROP_ONLINE:
+ case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT:
+ case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE:
+ case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT:
+ case POWER_SUPPLY_PROP_INPUT_VOLTAGE_LIMIT:
+ case POWER_SUPPLY_PROP_PRECHARGE_CURRENT:
+ case POWER_SUPPLY_PROP_CHARGE_TERM_CURRENT:
+ return 1;
+ default:
+ return 0;
+ }
+}
+
+static enum power_supply_property mt6370_chg_properties[] = {
+ POWER_SUPPLY_PROP_ONLINE,
+ POWER_SUPPLY_PROP_STATUS,
+ POWER_SUPPLY_PROP_CHARGE_TYPE,
+ POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT,
+ POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX,
+ POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE,
+ POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX,
+ POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT,
+ POWER_SUPPLY_PROP_INPUT_VOLTAGE_LIMIT,
+ POWER_SUPPLY_PROP_PRECHARGE_CURRENT,
+ POWER_SUPPLY_PROP_CHARGE_TERM_CURRENT,
+ POWER_SUPPLY_PROP_TYPE,
+ POWER_SUPPLY_PROP_USB_TYPE,
+};
+
+static enum power_supply_usb_type mt6370_chg_usb_types[] = {
+ POWER_SUPPLY_USB_TYPE_UNKNOWN,
+ POWER_SUPPLY_USB_TYPE_SDP,
+ POWER_SUPPLY_USB_TYPE_CDP,
+ POWER_SUPPLY_USB_TYPE_DCP,
+};
+
+static struct power_supply_desc mt6370_chg_psy_desc = {
+ .type = POWER_SUPPLY_TYPE_USB,
+ .properties = mt6370_chg_properties,
+ .num_properties = ARRAY_SIZE(mt6370_chg_properties),
+ .get_property = mt6370_chg_get_property,
+ .set_property = mt6370_chg_set_property,
+ .property_is_writeable = mt6370_chg_property_is_writeable,
+ .usb_types = mt6370_chg_usb_types,
+ .num_usb_types = ARRAY_SIZE(mt6370_chg_usb_types),
+};
+
+static const struct regulator_ops mt6370_chg_otg_ops = {
+ .list_voltage = regulator_list_voltage_linear,
+ .enable = regulator_enable_regmap,
+ .disable = regulator_disable_regmap,
+ .is_enabled = regulator_is_enabled_regmap,
+ .set_voltage_sel = regulator_set_voltage_sel_regmap,
+ .get_voltage_sel = regulator_get_voltage_sel_regmap,
+ .set_current_limit = regulator_set_current_limit_regmap,
+ .get_current_limit = regulator_get_current_limit_regmap,
+};
+
+static const struct regulator_desc mt6370_chg_otg_rdesc = {
+ .of_match = "usb-otg-vbus-regulator",
+ .of_parse_cb = mt6370_chg_otg_of_parse_cb,
+ .name = "mt6370-usb-otg-vbus",
+ .ops = &mt6370_chg_otg_ops,
+ .owner = THIS_MODULE,
+ .type = REGULATOR_VOLTAGE,
+ .min_uV = 4425000,
+ .uV_step = 25000,
+ .n_voltages = 57,
+ .vsel_reg = MT6370_REG_CHG_CTRL5,
+ .vsel_mask = MT6370_VOBST_MASK,
+ .enable_reg = MT6370_REG_CHG_CTRL1,
+ .enable_mask = MT6370_OPA_MODE_MASK,
+ .curr_table = mt6370_chg_otg_oc_ma,
+ .n_current_limits = ARRAY_SIZE(mt6370_chg_otg_oc_ma),
+ .csel_reg = MT6370_REG_CHG_CTRL10,
+ .csel_mask = MT6370_OTG_OC_MASK,
+};
+
+static int mt6370_chg_init_rmap_fields(struct mt6370_priv *priv)
+{
+ int i;
+ const struct mt6370_chg_field *fds = mt6370_chg_fields;
+
+ for (i = 0; i < F_MAX; i++) {
+ priv->rmap_fields[i] = devm_regmap_field_alloc(priv->dev,
+ priv->regmap,
+ fds[i].field);
+ if (IS_ERR(priv->rmap_fields[i])) {
+ dev_err(priv->dev,
+ "Failed to allocate regmap field [%s]\n",
+ fds[i].name);
+ return PTR_ERR(priv->rmap_fields[i]);
+ }
+ }
+
+ return 0;
+}
+
+static int mt6370_chg_init_setting(struct mt6370_priv *priv)
+{
+ int ret;
+
+ priv->wq = create_singlethread_workqueue(dev_name(priv->dev));
+ if (IS_ERR(priv->wq)) {
+ dev_err(priv->dev, "Failed to create workqueue\n");
+ return PTR_ERR(priv->wq);
+ }
+
+ INIT_WORK(&priv->bc12_work, mt6370_chg_bc12_work_func);
+ INIT_DELAYED_WORK(&priv->mivr_dwork, mt6370_chg_mivr_dwork_func);
+ mutex_init(&priv->attach_lock);
+ atomic_set(&priv->attach, 0);
+
+ /* Disable usb_chg_en */
+ ret = mt6370_chg_field_set(priv, F_USBCHGEN, 0);
+ if (ret < 0) {
+ dev_err(priv->dev, "Failed to disable usb_chg_en\n");
+ return ret;
+ }
+
+ /* ICHG/IEOC Workaroud, ICHG can not be set less than 900mA */
+ ret = mt6370_chg_field_set(priv, F_ICHG, 900);
+ if (ret < 0) {
+ dev_err(priv->dev, "Failed to set ICHG to 900mA");
+ return ret;
+ }
+
+ /* Change input current limit selection to using IAICR results */
+ ret = mt6370_chg_field_set(priv, F_IINLMTSEL, 3);
+ if (ret < 0) {
+ dev_err(priv->dev, "Failed to set IINLMTSEL\n");
+ return ret;
+ }
+
+ return 0;
+}
+
+#define MT6370_CHG_DT_PROP_DECL(_name, _type, _field) \
+{ \
+ .name = "mediatek,chg-" #_name, \
+ .type = MT6370_PARSE_TYPE_##_type, \
+ .fd = _field, \
+}
+
+static int mt6370_chg_init_otg_regulator(struct mt6370_priv *priv)
+{
+ struct regulator_config rcfg = {
+ .dev = priv->dev,
+ .regmap = priv->regmap,
+ .driver_data = priv,
+ };
+
+ priv->rdev = devm_regulator_register(priv->dev, &mt6370_chg_otg_rdesc,
+ &rcfg);
+
+ return IS_ERR(priv->rdev) ? PTR_ERR(priv->rdev) : 0;
+}
+
+static int mt6370_chg_init_psy(struct mt6370_priv *priv)
+{
+ struct power_supply_config cfg = {
+ .drv_data = priv,
+ .of_node = priv->dev->of_node,
+ };
+
+ priv->psy_desc = &mt6370_chg_psy_desc;
+ priv->psy_desc->name = dev_name(priv->dev);
+ priv->psy = devm_power_supply_register(priv->dev, priv->psy_desc, &cfg);
+
+ return IS_ERR(priv->psy) ? PTR_ERR(priv->psy) : 0;
+}
+
+static irqreturn_t mt6370_attach_i_handler(int irq, void *data)
+{
+ struct mt6370_priv *priv = data;
+ u32 otg_en;
+ int ret;
+
+ /* Check in otg mode or not */
+ ret = mt6370_chg_field_get(priv, F_BOOST_STAT, &otg_en);
+ if (ret < 0) {
+ dev_err(priv->dev, "failed to get otg state\n");
+ return IRQ_HANDLED;
+ }
+
+ if (otg_en)
+ return IRQ_HANDLED;
+
+ mutex_lock(&priv->attach_lock);
+ atomic_set(&priv->attach, MT6370_ATTACH_STAT_ATTACH_BC12_DONE);
+ mutex_unlock(&priv->attach_lock);
+
+ if (!queue_work(priv->wq, &priv->bc12_work))
+ dev_err(priv->dev, "bc12 work has already queued\n");
+
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t mt6370_uvp_d_evt_handler(int irq, void *data)
+{
+ struct mt6370_priv *priv = data;
+
+ mt6370_chg_pwr_rdy_check(priv);
+
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t mt6370_mivr_handler(int irq, void *data)
+{
+ struct mt6370_priv *priv = data;
+
+ pm_stay_awake(priv->dev);
+ mt6370_chg_enable_irq(priv, "mivr", false);
+ schedule_delayed_work(&priv->mivr_dwork, msecs_to_jiffies(200));
+
+ return IRQ_HANDLED;
+}
+
+#define MT6370_CHG_IRQ(_name) \
+{ \
+ .name = #_name, \
+ .handler = mt6370_##_name##_handler, \
+}
+
+static int mt6370_chg_init_irq(struct mt6370_priv *priv)
+{
+ int i, ret;
+ const struct {
+ char *name;
+ irq_handler_t handler;
+ } mt6370_chg_irqs[] = {
+ MT6370_CHG_IRQ(attach_i),
+ MT6370_CHG_IRQ(uvp_d_evt),
+ MT6370_CHG_IRQ(mivr),
+ };
+
+ for (i = 0; i < ARRAY_SIZE(mt6370_chg_irqs); i++) {
+ ret = platform_get_irq_byname(to_platform_device(priv->dev),
+ mt6370_chg_irqs[i].name);
+ if (ret < 0) {
+ dev_err(priv->dev, "Failed to get irq %s\n",
+ mt6370_chg_irqs[i].name);
+ return ret;
+ }
+
+ ret = devm_request_threaded_irq(priv->dev, ret, NULL,
+ mt6370_chg_irqs[i].handler,
+ IRQF_TRIGGER_FALLING,
+ dev_name(priv->dev),
+ priv);
+
+ if (ret < 0) {
+ dev_err(priv->dev, "Failed to request irq %s\n",
+ mt6370_chg_irqs[i].name);
+ return ret;
+ }
+ }
+
+ return 0;
+}
+
+static int mt6370_chg_probe(struct platform_device *pdev)
+{
+ int ret;
+ struct mt6370_priv *priv;
+
+ priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ priv->dev = &pdev->dev;
+
+ priv->regmap = dev_get_regmap(pdev->dev.parent, NULL);
+ if (!priv->regmap) {
+ dev_err(&pdev->dev, "Failed to get regmap\n");
+ return -ENODEV;
+ }
+
+ ret = mt6370_chg_init_rmap_fields(priv);
+ if (ret) {
+ dev_err(&pdev->dev, "Failed to init regmap fields\n");
+ return ret;
+ }
+
+ platform_set_drvdata(pdev, priv);
+
+ priv->iio_adcs = devm_iio_channel_get_all(priv->dev);
+ if (IS_ERR(priv->iio_adcs)) {
+ dev_err(&pdev->dev, "Failed to get iio adc\n");
+ return PTR_ERR(priv->iio_adcs);
+ }
+
+ ret = mt6370_chg_init_otg_regulator(priv);
+ if (ret) {
+ dev_err(&pdev->dev, "Failed to init otg regulator\n");
+ return ret;
+ }
+
+ ret = mt6370_chg_init_psy(priv);
+ if (ret) {
+ dev_err(&pdev->dev, "Failed to init psy\n");
+ return ret;
+ }
+
+ ret = mt6370_chg_init_setting(priv);
+ if (ret) {
+ dev_err(&pdev->dev, "Failed to init mt6370 private data\n");
+ goto probe_out;
+ }
+
+ ret = mt6370_chg_init_irq(priv);
+ if (ret) {
+ dev_err(&pdev->dev, "Failed to init irq\n");
+ goto probe_out;
+ }
+
+ mt6370_chg_pwr_rdy_check(priv);
+
+ return 0;
+
+probe_out:
+ destroy_workqueue(priv->wq);
+ mutex_destroy(&priv->attach_lock);
+
+ return ret;
+}
+
+static int mt6370_chg_remove(struct platform_device *pdev)
+{
+ struct mt6370_priv *priv = platform_get_drvdata(pdev);
+
+ if (priv) {
+ mt6370_chg_enable_irq(priv, "mivr", false);
+ cancel_delayed_work_sync(&priv->mivr_dwork);
+ destroy_workqueue(priv->wq);
+ mutex_destroy(&priv->attach_lock);
+ }
+
+ return 0;
+}
+
+static const struct of_device_id mt6370_chg_of_match[] = {
+ { .compatible = "mediatek,mt6370-charger", },
+ {}
+};
+MODULE_DEVICE_TABLE(of, mt6370_chg_of_match);
+
+static struct platform_driver mt6370_chg_driver = {
+ .probe = mt6370_chg_probe,
+ .remove = mt6370_chg_remove,
+ .driver = {
+ .name = "mt6370-charger",
+ .of_match_table = of_match_ptr(mt6370_chg_of_match),
+ },
+};
+module_platform_driver(mt6370_chg_driver);
+
+MODULE_AUTHOR("ChiaEn Wu <[email protected]>");
+MODULE_DESCRIPTION("Mediatek MT6370 Charger Driver");
+MODULE_LICENSE("GPL v2");
--
2.7.4
From: ChiYuan Huang <[email protected]>
Add chip level mt6370 tcpci driver.
Signed-off-by: ChiYuan Huang <[email protected]>
---
drivers/usb/typec/tcpm/Kconfig | 8 ++
drivers/usb/typec/tcpm/Makefile | 1 +
drivers/usb/typec/tcpm/tcpci_mt6370.c | 212 ++++++++++++++++++++++++++++++++++
3 files changed, 221 insertions(+)
create mode 100644 drivers/usb/typec/tcpm/tcpci_mt6370.c
diff --git a/drivers/usb/typec/tcpm/Kconfig b/drivers/usb/typec/tcpm/Kconfig
index 557f392..f4b7363 100644
--- a/drivers/usb/typec/tcpm/Kconfig
+++ b/drivers/usb/typec/tcpm/Kconfig
@@ -35,6 +35,14 @@ config TYPEC_MT6360
USB Type-C. It works with Type-C Port Controller Manager
to provide USB PD and USB Type-C functionalities.
+config TYPEC_TCPCI_MT6370
+ tristate "Mediatek MT6370 Type-C driver"
+ depends on MFD_MT6370
+ help
+ Mediatek MT6370 is a multi-functional IC that includes
+ USB Type-C. It works with Type-C Port Controller Manager
+ to provide USB PD and USB Type-C functionalities.
+
config TYPEC_TCPCI_MAXIM
tristate "Maxim TCPCI based Type-C chip driver"
help
diff --git a/drivers/usb/typec/tcpm/Makefile b/drivers/usb/typec/tcpm/Makefile
index 7d499f3..906d9dc 100644
--- a/drivers/usb/typec/tcpm/Makefile
+++ b/drivers/usb/typec/tcpm/Makefile
@@ -6,4 +6,5 @@ typec_wcove-y := wcove.o
obj-$(CONFIG_TYPEC_TCPCI) += tcpci.o
obj-$(CONFIG_TYPEC_RT1711H) += tcpci_rt1711h.o
obj-$(CONFIG_TYPEC_MT6360) += tcpci_mt6360.o
+obj-$(CONFIG_TYPEC_TCPCI_MT6370) += tcpci_mt6370.o
obj-$(CONFIG_TYPEC_TCPCI_MAXIM) += tcpci_maxim.o
diff --git a/drivers/usb/typec/tcpm/tcpci_mt6370.c b/drivers/usb/typec/tcpm/tcpci_mt6370.c
new file mode 100644
index 0000000..ce7f5e0
--- /dev/null
+++ b/drivers/usb/typec/tcpm/tcpci_mt6370.c
@@ -0,0 +1,212 @@
+// SPDX-License-Identifier: GPL-2.0+
+
+#include <linux/bits.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/pm_wakeup.h>
+#include <linux/pm_wakeirq.h>
+#include <linux/regmap.h>
+#include <linux/regulator/consumer.h>
+#include <linux/usb/tcpm.h>
+#include "tcpci.h"
+
+#define MT6370_REG_SYSCTRL8 0x9B
+
+#define MT6370_AUTOIDLE_MASK BIT(3)
+
+#define MT6370_VENDOR_ID 0x29CF
+#define MT6370_TCPC_DID_A 0x2170
+
+struct mt6370_priv {
+ struct device *dev;
+ struct regulator *vbus;
+ struct tcpci *tcpci;
+ struct tcpci_data tcpci_data;
+ int irq;
+};
+
+static const struct reg_sequence mt6370_reg_init[] = {
+ REG_SEQ(0xA0, 0x1, 1000),
+ REG_SEQ(0x81, 0x38, 0),
+ REG_SEQ(0x82, 0x82, 0),
+ REG_SEQ(0xBA, 0xFC, 0),
+ REG_SEQ(0xBB, 0x50, 0),
+ REG_SEQ(0x9E, 0x8F, 0),
+ REG_SEQ(0xA1, 0x5, 0),
+ REG_SEQ(0xA2, 0x4, 0),
+ REG_SEQ(0xA3, 0x4A, 0),
+ REG_SEQ(0xA4, 0x01, 0),
+ REG_SEQ(0x95, 0x01, 0),
+ REG_SEQ(0x80, 0x71, 0),
+ REG_SEQ(0x9B, 0x3A, 1000)
+};
+
+static int mt6370_tcpc_init(struct tcpci *tcpci, struct tcpci_data *data)
+{
+ u16 did;
+ int ret;
+
+ ret = regmap_register_patch(data->regmap, mt6370_reg_init,
+ ARRAY_SIZE(mt6370_reg_init));
+ if (ret)
+ return ret;
+
+ ret = regmap_raw_read(data->regmap, TCPC_BCD_DEV, &did, sizeof(u16));
+ if (ret)
+ return ret;
+
+ if (did == MT6370_TCPC_DID_A) {
+ ret = regmap_write(data->regmap, TCPC_FAULT_CTRL, 0x80);
+ if (ret)
+ return ret;
+ }
+
+ return 0;
+}
+
+static int mt6370_tcpc_set_vconn(struct tcpci *tcpci, struct tcpci_data *data,
+ bool enable)
+{
+ return regmap_update_bits(data->regmap, MT6370_REG_SYSCTRL8,
+ MT6370_AUTOIDLE_MASK,
+ !enable ? MT6370_AUTOIDLE_MASK : 0);
+}
+
+static int mt6370_tcpc_set_vbus(struct tcpci *tcpci, struct tcpci_data *data,
+ bool source, bool sink)
+{
+ struct mt6370_priv *priv = container_of(data, struct mt6370_priv,
+ tcpci_data);
+ int ret;
+
+ ret = regulator_is_enabled(priv->vbus);
+ if (ret < 0)
+ return ret;
+
+ if (ret && !source)
+ ret = regulator_disable(priv->vbus);
+ else if (!ret && source)
+ ret = regulator_enable(priv->vbus);
+ else
+ ret = 0;
+
+ return ret;
+}
+
+static irqreturn_t mt6370_irq_handler(int irq, void *dev_id)
+{
+ struct mt6370_priv *priv = dev_id;
+
+ return tcpci_irq(priv->tcpci);
+}
+
+static int mt6370_check_vendor_info(struct mt6370_priv *priv)
+{
+ struct regmap *regmap = priv->tcpci_data.regmap;
+ u16 vid;
+ int ret;
+
+ ret = regmap_raw_read(regmap, TCPC_VENDOR_ID, &vid, sizeof(u16));
+ if (ret)
+ return ret;
+
+ if (vid != MT6370_VENDOR_ID) {
+ dev_err(priv->dev, "Vendor ID not correct 0x%02x\n", vid);
+ return -ENODEV;
+ }
+
+ return 0;
+}
+
+static int mt6370_tcpc_probe(struct platform_device *pdev)
+{
+ struct mt6370_priv *priv;
+ int ret;
+
+ priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ priv->dev = &pdev->dev;
+ platform_set_drvdata(pdev, priv);
+
+ priv->tcpci_data.regmap = dev_get_regmap(pdev->dev.parent, NULL);
+ if (!priv->tcpci_data.regmap) {
+ dev_err(&pdev->dev, "Failed to init regmap\n");
+ return -ENODEV;
+ }
+
+ ret = mt6370_check_vendor_info(priv);
+ if (ret) {
+ dev_err(&pdev->dev, "Failed to check vendor info (%d)\n", ret);
+ return ret;
+ }
+
+ priv->irq = platform_get_irq(pdev, 0);
+ if (priv->irq < 0) {
+ dev_err(&pdev->dev, "Failed to get TCPC irq (%d)\n", priv->irq);
+ return priv->irq;
+ }
+
+ /* Assign TCPCI feature and ops */
+ priv->tcpci_data.auto_discharge_disconnect = 1;
+ priv->tcpci_data.init = mt6370_tcpc_init;
+ priv->tcpci_data.set_vconn = mt6370_tcpc_set_vconn;
+
+ priv->vbus = devm_regulator_get_optional(&pdev->dev, "vbus");
+ if (!IS_ERR(priv->vbus))
+ priv->tcpci_data.set_vbus = mt6370_tcpc_set_vbus;
+
+ priv->tcpci = tcpci_register_port(&pdev->dev, &priv->tcpci_data);
+ if (IS_ERR(priv->tcpci)) {
+ dev_err(&pdev->dev, "Failed to register tcpci port\n");
+ return PTR_ERR(priv->tcpci);
+ }
+
+ ret = devm_request_threaded_irq(&pdev->dev, priv->irq, NULL,
+ mt6370_irq_handler, IRQF_ONESHOT,
+ dev_name(&pdev->dev), priv);
+ if (ret) {
+ dev_err(&pdev->dev, "Failed to allocate irq (%d)\n", ret);
+ tcpci_unregister_port(priv->tcpci);
+ return ret;
+ }
+
+ device_init_wakeup(&pdev->dev, true);
+ dev_pm_set_wake_irq(&pdev->dev, priv->irq);
+ return 0;
+}
+
+static int mt6370_tcpc_remove(struct platform_device *pdev)
+{
+ struct mt6370_priv *priv = platform_get_drvdata(pdev);
+
+ disable_irq(priv->irq);
+ tcpci_unregister_port(priv->tcpci);
+ dev_pm_clear_wake_irq(&pdev->dev);
+ device_init_wakeup(&pdev->dev, false);
+ return 0;
+}
+
+static const struct of_device_id mt6370_tcpc_devid_table[] = {
+ { .compatible = "mediatek,mt6370-tcpc", },
+ {}
+};
+MODULE_DEVICE_TABLE(of, mt6370_tcpc_devid_table);
+
+static struct platform_driver mt6370_tcpc_driver = {
+ .driver = {
+ .name = "mt6370-tcpc",
+ .of_match_table = mt6370_tcpc_devid_table,
+ },
+ .probe = mt6370_tcpc_probe,
+ .remove = mt6370_tcpc_remove,
+};
+module_platform_driver(mt6370_tcpc_driver);
+
+MODULE_AUTHOR("ChiYuan Huang <[email protected]>");
+MODULE_DESCRIPTION("MT6370 USB Type-C Port Controller Interface Driver");
+MODULE_LICENSE("GPL v2");
--
2.7.4
From: ChiaEn Wu <[email protected]>
Add Mediatek MT6370 ADC support.
Signed-off-by: ChiaEn Wu <[email protected]>
---
v3
- Refine Kconfig help text
- Refine all channel value in read_scale()
a. current: uA --> mA
b. voltage: uV --> mV
c. temperature: degrees Celsius --> milli degrees Celsius
- Add "default:" condition of switch statement in read_scale() and read_raw()
- Add error message for reading ADC register failed
- Add the comment for adc_lock
- Add <linux/mod_devicetable.h> header file for struct of_device_id
- Replace "adc" text with "ADC" in all of the error messages
---
drivers/iio/adc/Kconfig | 9 ++
drivers/iio/adc/Makefile | 1 +
drivers/iio/adc/mt6370-adc.c | 275 +++++++++++++++++++++++++++++++++++++++++++
3 files changed, 285 insertions(+)
create mode 100644 drivers/iio/adc/mt6370-adc.c
diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig
index 48ace74..c36b640 100644
--- a/drivers/iio/adc/Kconfig
+++ b/drivers/iio/adc/Kconfig
@@ -737,6 +737,15 @@ config MEDIATEK_MT6360_ADC
is used in smartphones and tablets and supports a 11 channel
general purpose ADC.
+config MEDIATEK_MT6370_ADC
+ tristate "Mediatek MT6370 ADC driver"
+ depends on MFD_MT6370
+ help
+ Say yes here to enable Mediatek MT6370 ADC support.
+
+ This ADC driver provides 9 channels for system monitoring (charger
+ current, voltage, and temperature).
+
config MEDIATEK_MT6577_AUXADC
tristate "MediaTek AUXADC driver"
depends on ARCH_MEDIATEK || COMPILE_TEST
diff --git a/drivers/iio/adc/Makefile b/drivers/iio/adc/Makefile
index 39d806f..0ce285c 100644
--- a/drivers/iio/adc/Makefile
+++ b/drivers/iio/adc/Makefile
@@ -68,6 +68,7 @@ obj-$(CONFIG_MCP320X) += mcp320x.o
obj-$(CONFIG_MCP3422) += mcp3422.o
obj-$(CONFIG_MCP3911) += mcp3911.o
obj-$(CONFIG_MEDIATEK_MT6360_ADC) += mt6360-adc.o
+obj-$(CONFIG_MEDIATEK_MT6370_ADC) += mt6370-adc.o
obj-$(CONFIG_MEDIATEK_MT6577_AUXADC) += mt6577_auxadc.o
obj-$(CONFIG_MEN_Z188_ADC) += men_z188_adc.o
obj-$(CONFIG_MESON_SARADC) += meson_saradc.o
diff --git a/drivers/iio/adc/mt6370-adc.c b/drivers/iio/adc/mt6370-adc.c
new file mode 100644
index 0000000..ed7f1b3
--- /dev/null
+++ b/drivers/iio/adc/mt6370-adc.c
@@ -0,0 +1,275 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include <dt-bindings/iio/adc/mediatek,mt6370_adc.h>
+#include <linux/bits.h>
+#include <linux/bitfield.h>
+#include <linux/iio/iio.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/mod_devicetable.h>
+#include <linux/mutex.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+
+#define MT6370_REG_CHG_CTRL3 0x113 /* AICR */
+#define MT6370_REG_CHG_CTRL7 0x117 /* ICHG */
+#define MT6370_REG_CHG_ADC 0x121
+#define MT6370_REG_ADC_DATA_H 0x14C
+
+#define MT6370_ADC_START_MASK BIT(0)
+#define MT6370_ADC_IN_SEL_MASK GENMASK(7, 4)
+#define MT6370_AICR_ICHG_MASK GENMASK(7, 2)
+
+#define MT6370_AICR_400MA 0x6
+#define MT6370_ICHG_500MA 0x4
+#define MT6370_ICHG_900MA 0x8
+
+#define ADC_CONV_TIME_US 35000
+#define ADC_CONV_POLLING_TIME 1000
+
+struct mt6370_adc_data {
+ struct device *dev;
+ struct regmap *regmap;
+ /*
+ * This mutex lock is for preventing the different ADC channels
+ * from being read at the same time.
+ */
+ struct mutex adc_lock;
+};
+
+static int mt6370_adc_read_channel(struct mt6370_adc_data *priv, int chan,
+ unsigned long addr, int *val)
+{
+ __be16 be_val;
+ unsigned int reg_val;
+ int ret;
+
+ mutex_lock(&priv->adc_lock);
+
+ reg_val = MT6370_ADC_START_MASK |
+ FIELD_PREP(MT6370_ADC_IN_SEL_MASK, addr);
+ ret = regmap_write(priv->regmap, MT6370_REG_CHG_ADC, reg_val);
+ if (ret)
+ goto adc_unlock;
+
+ msleep(ADC_CONV_TIME_US / 1000);
+
+ ret = regmap_read_poll_timeout(priv->regmap,
+ MT6370_REG_CHG_ADC, reg_val,
+ !(reg_val & MT6370_ADC_START_MASK),
+ ADC_CONV_POLLING_TIME,
+ ADC_CONV_TIME_US * 3);
+ if (ret) {
+ if (ret == -ETIMEDOUT)
+ dev_err(priv->dev, "Failed to wait ADC conversion\n");
+ else
+ dev_err(priv->dev,
+ "Failed to read ADC register (%d)\n", ret);
+
+ goto adc_unlock;
+ }
+
+ ret = regmap_raw_read(priv->regmap, MT6370_REG_ADC_DATA_H,
+ &be_val, sizeof(be_val));
+ if (ret)
+ goto adc_unlock;
+
+ *val = be16_to_cpu(be_val);
+ ret = IIO_VAL_INT;
+
+adc_unlock:
+ mutex_unlock(&priv->adc_lock);
+
+ return ret;
+}
+
+static int mt6370_adc_read_scale(struct mt6370_adc_data *priv,
+ int chan, int *val1, int *val2)
+{
+ unsigned int reg_val;
+ int ret;
+
+ switch (chan) {
+ case MT6370_CHAN_VBAT:
+ case MT6370_CHAN_VSYS:
+ case MT6370_CHAN_CHG_VDDP:
+ *val1 = 5;
+ return IIO_VAL_INT;
+ case MT6370_CHAN_IBUS:
+ ret = regmap_read(priv->regmap, MT6370_REG_CHG_CTRL3, ®_val);
+ if (ret)
+ return ret;
+
+ reg_val = FIELD_GET(MT6370_AICR_ICHG_MASK, reg_val);
+ if (reg_val < MT6370_AICR_400MA)
+ *val1 = 3350;
+ else
+ *val1 = 5000;
+
+ *val2 = 100;
+
+ return IIO_VAL_FRACTIONAL;
+ case MT6370_CHAN_IBAT:
+ ret = regmap_read(priv->regmap, MT6370_REG_CHG_CTRL7, ®_val);
+ if (ret)
+ return ret;
+
+ reg_val = FIELD_GET(MT6370_AICR_ICHG_MASK, reg_val);
+ if (reg_val < MT6370_ICHG_500MA)
+ *val1 = 2375;
+ else if (reg_val >= MT6370_ICHG_500MA &&
+ reg_val < MT6370_ICHG_900MA)
+ *val1 = 2680;
+ else
+ *val1 = 5000;
+
+ *val2 = 100;
+
+ return IIO_VAL_FRACTIONAL;
+ case MT6370_CHAN_VBUSDIV5:
+ *val1 = 25;
+ return IIO_VAL_INT;
+ case MT6370_CHAN_VBUSDIV2:
+ *val1 = 50;
+ return IIO_VAL_INT;
+ case MT6370_CHAN_TS_BAT:
+ *val1 = 25;
+ *val2 = 10000;
+ return IIO_VAL_FRACTIONAL;
+ case MT6370_CHAN_TEMP_JC:
+ *val1 = 2000;
+ return IIO_VAL_FRACTIONAL;
+ default:
+ return -EINVAL;
+ }
+}
+
+static int mt6370_adc_read_offset(struct mt6370_adc_data *priv,
+ int chan, int *val)
+{
+ *val = -20;
+
+ return IIO_VAL_INT;
+}
+
+static int mt6370_adc_read_raw(struct iio_dev *iio_dev,
+ const struct iio_chan_spec *chan,
+ int *val, int *val2, long mask)
+{
+ struct mt6370_adc_data *priv = iio_priv(iio_dev);
+
+ switch (mask) {
+ case IIO_CHAN_INFO_RAW:
+ return mt6370_adc_read_channel(priv, chan->channel,
+ chan->address, val);
+ case IIO_CHAN_INFO_SCALE:
+ return mt6370_adc_read_scale(priv, chan->channel, val, val2);
+ case IIO_CHAN_INFO_OFFSET:
+ return mt6370_adc_read_offset(priv, chan->channel, val);
+ default:
+ return -EINVAL;
+ }
+}
+
+static const char * const mt6370_channel_labels[MT6370_CHAN_MAX] = {
+ [MT6370_CHAN_VBUSDIV5] = "vbusdiv5",
+ [MT6370_CHAN_VBUSDIV2] = "vbusdiv2",
+ [MT6370_CHAN_VSYS] = "vsys",
+ [MT6370_CHAN_VBAT] = "vbat",
+ [MT6370_CHAN_TS_BAT] = "ts_bat",
+ [MT6370_CHAN_IBUS] = "ibus",
+ [MT6370_CHAN_IBAT] = "ibat",
+ [MT6370_CHAN_CHG_VDDP] = "chg_vddp",
+ [MT6370_CHAN_TEMP_JC] = "temp_jc",
+};
+
+static int mt6370_adc_read_label(struct iio_dev *iio_dev,
+ struct iio_chan_spec const *chan, char *label)
+{
+ return snprintf(label, PAGE_SIZE, "%s\n",
+ mt6370_channel_labels[chan->channel]);
+}
+
+static const struct iio_info mt6370_adc_iio_info = {
+ .read_raw = mt6370_adc_read_raw,
+ .read_label = mt6370_adc_read_label,
+};
+
+#define MT6370_ADC_CHAN(_idx, _type, _addr, _extra_info) { \
+ .type = _type, \
+ .channel = MT6370_CHAN_##_idx, \
+ .address = _addr, \
+ .scan_index = MT6370_CHAN_##_idx, \
+ .indexed = 1, \
+ .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \
+ BIT(IIO_CHAN_INFO_SCALE) | \
+ _extra_info \
+}
+
+static const struct iio_chan_spec mt6370_adc_channels[] = {
+ MT6370_ADC_CHAN(VBUSDIV5, IIO_VOLTAGE, 1, 0),
+ MT6370_ADC_CHAN(VBUSDIV2, IIO_VOLTAGE, 2, 0),
+ MT6370_ADC_CHAN(VSYS, IIO_VOLTAGE, 3, 0),
+ MT6370_ADC_CHAN(VBAT, IIO_VOLTAGE, 4, 0),
+ MT6370_ADC_CHAN(TS_BAT, IIO_VOLTAGE, 6, 0),
+ MT6370_ADC_CHAN(IBUS, IIO_CURRENT, 8, 0),
+ MT6370_ADC_CHAN(IBAT, IIO_CURRENT, 9, 0),
+ MT6370_ADC_CHAN(CHG_VDDP, IIO_VOLTAGE, 11, 0),
+ MT6370_ADC_CHAN(TEMP_JC, IIO_TEMP, 12, BIT(IIO_CHAN_INFO_OFFSET)),
+};
+
+static int mt6370_adc_probe(struct platform_device *pdev)
+{
+ int ret;
+ struct mt6370_adc_data *priv;
+ struct regmap *regmap;
+ struct iio_dev *indio_dev;
+
+ regmap = dev_get_regmap(pdev->dev.parent, NULL);
+ if (!regmap) {
+ dev_err(&pdev->dev, "Failed to get regmap\n");
+ return -ENODEV;
+ }
+
+ indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*priv));
+ if (!indio_dev)
+ return -ENOMEM;
+
+ priv = iio_priv(indio_dev);
+ priv->dev = &pdev->dev;
+ priv->regmap = regmap;
+ mutex_init(&priv->adc_lock);
+
+ ret = regmap_write(priv->regmap, MT6370_REG_CHG_ADC, 0);
+ if (ret) {
+ dev_err(&pdev->dev, "Failed to reset ADC\n");
+ return ret;
+ }
+
+ indio_dev->name = "mt6370-adc";
+ indio_dev->info = &mt6370_adc_iio_info;
+ indio_dev->modes = INDIO_DIRECT_MODE;
+ indio_dev->channels = mt6370_adc_channels;
+ indio_dev->num_channels = ARRAY_SIZE(mt6370_adc_channels);
+
+ return devm_iio_device_register(&pdev->dev, indio_dev);
+}
+
+static const struct of_device_id mt6370_adc_of_id[] = {
+ { .compatible = "mediatek,mt6370-adc", },
+ {}
+};
+MODULE_DEVICE_TABLE(of, mt6370_adc_of_id);
+
+static struct platform_driver mt6370_adc_driver = {
+ .driver = {
+ .name = "mt6370-adc",
+ .of_match_table = mt6370_adc_of_id,
+ },
+ .probe = mt6370_adc_probe,
+};
+module_platform_driver(mt6370_adc_driver);
+
+MODULE_AUTHOR("ChiaEn Wu <[email protected]>");
+MODULE_DESCRIPTION("MT6370 ADC Drvier");
+MODULE_LICENSE("GPL v2");
--
2.7.4
From: Alice Chen <[email protected]>
Add Mediatek MT6370 flashlight support.
Signed-off-by: Alice Chen <[email protected]>
---
drivers/leds/flash/Kconfig | 9 +
drivers/leds/flash/Makefile | 1 +
drivers/leds/flash/leds-mt6370-flash.c | 657 +++++++++++++++++++++++++++++++++
3 files changed, 667 insertions(+)
create mode 100644 drivers/leds/flash/leds-mt6370-flash.c
diff --git a/drivers/leds/flash/Kconfig b/drivers/leds/flash/Kconfig
index d3eb689..d38e263 100644
--- a/drivers/leds/flash/Kconfig
+++ b/drivers/leds/flash/Kconfig
@@ -90,4 +90,13 @@ config LEDS_SGM3140
This option enables support for the SGM3140 500mA Buck/Boost Charge
Pump LED Driver.
+config LEDS_MT6370_FLASHLIGHT
+ tristate "Flash LED Support for Mediatek MT6370 PMIC"
+ depends on LEDS_CLASS
+ depends on MFD_MT6370
+ help
+ Support 2 channels and torch/strobe mode.
+ Say Y here to enable support for
+ MT6370_FLASH_LED device.
+
endif # LEDS_CLASS_FLASH
diff --git a/drivers/leds/flash/Makefile b/drivers/leds/flash/Makefile
index 0acbddc..4c4c171 100644
--- a/drivers/leds/flash/Makefile
+++ b/drivers/leds/flash/Makefile
@@ -9,3 +9,4 @@ obj-$(CONFIG_LEDS_MAX77693) += leds-max77693.o
obj-$(CONFIG_LEDS_RT4505) += leds-rt4505.o
obj-$(CONFIG_LEDS_RT8515) += leds-rt8515.o
obj-$(CONFIG_LEDS_SGM3140) += leds-sgm3140.o
+obj-$(CONFIG_LEDS_MT6370_FLASHLIGHT) += leds-mt6370-flash.o
diff --git a/drivers/leds/flash/leds-mt6370-flash.c b/drivers/leds/flash/leds-mt6370-flash.c
new file mode 100644
index 0000000..97c69e1
--- /dev/null
+++ b/drivers/leds/flash/leds-mt6370-flash.c
@@ -0,0 +1,657 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+#include <linux/bitops.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/led-class-flash.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/platform_device.h>
+#include <linux/property.h>
+#include <linux/regmap.h>
+
+#include <media/v4l2-flash-led-class.h>
+
+enum {
+ MT6370_LED_FLASH1,
+ MT6370_LED_FLASH2,
+ MT6370_MAX_LEDS
+};
+
+/* Virtual definition for multicolor */
+
+#define MT6370_REG_FLEDEN 0x17E
+#define MT6370_REG_STRBTO 0x173
+#define MT6370_REG_CHGSTAT2 0x1D1
+#define MT6370_REG_FLEDSTAT1 0x1D9
+#define MT6370_REG_FLEDISTRB(_id) (0x174 + 4 * _id)
+#define MT6370_REG_FLEDITOR(_id) (0x175 + 4 * _id)
+#define MT6370_ITORCH_MASK GENMASK(4, 0)
+#define MT6370_ISTROBE_MASK GENMASK(6, 0)
+#define MT6370_STRBTO_MASK GENMASK(6, 0)
+#define MT6370_TORCHEN_MASK BIT(3)
+#define MT6370_STROBEN_MASK BIT(2)
+#define MT6370_FLCSEN_MASK(_id) BIT(MT6370_LED_FLASH2 - _id)
+#define MT6370_FLCSEN_MASK_ALL (BIT(0) | BIT(1))
+#define MT6370_FLEDCHGVINOVP_MASK BIT(3)
+#define MT6370_FLED1STRBTO_MASK BIT(11)
+#define MT6370_FLED2STRBTO_MASK BIT(10)
+#define MT6370_FLED1STRB_MASK BIT(9)
+#define MT6370_FLED2STRB_MASK BIT(8)
+#define MT6370_FLED1SHORT_MASK BIT(7)
+#define MT6370_FLED2SHORT_MASK BIT(6)
+#define MT6370_FLEDLVF_MASK BIT(3)
+
+#define MT6370_LED_JOINT 2
+#define MT6370_RANGE_FLED_REG 4
+#define MT6370_ITORCH_MINUA 25000
+#define MT6370_ITORCH_STEPUA 12500
+#define MT6370_ITORCH_MAXUA 400000
+#define MT6370_ITORCH_DOUBLE_MAXUA 800000
+#define MT6370_ISTRB_MINUA 50000
+#define MT6370_ISTRB_STEPUA 12500
+#define MT6370_ISTRB_MAXUA 1500000
+#define MT6370_ISTRB_DOUBLE_MAXUA 3000000
+#define MT6370_STRBTO_MINUS 64000
+#define MT6370_STRBTO_STEPUS 32000
+#define MT6370_STRBTO_MAXUS 2432000
+
+#define STATE_OFF 0
+#define STATE_KEEP 1
+#define STATE_ON 2
+
+#define to_mt6370_led(ptr, member) container_of(ptr, struct mt6370_led, member)
+
+struct mt6370_led {
+ struct led_classdev_flash flash;
+ struct v4l2_flash *v4l2_flash;
+ struct mt6370_priv *priv;
+ u32 led_no;
+ u32 default_state;
+};
+
+struct mt6370_priv {
+ struct device *dev;
+ struct regmap *regmap;
+ struct mutex lock;
+ unsigned int fled_strobe_used;
+ unsigned int fled_torch_used;
+ unsigned int leds_active;
+ unsigned int leds_count;
+ struct mt6370_led leds[];
+};
+
+static int mt6370_torch_brightness_set(struct led_classdev *lcdev,
+ enum led_brightness level)
+{
+ struct mt6370_led *led = to_mt6370_led(lcdev, flash.led_cdev);
+ struct mt6370_priv *priv = led->priv;
+ u32 led_enable_mask = (led->led_no == MT6370_LED_JOINT) ?
+ MT6370_FLCSEN_MASK_ALL :
+ MT6370_FLCSEN_MASK(led->led_no);
+ u32 enable_mask = MT6370_TORCHEN_MASK | led_enable_mask;
+ u32 val = level ? led_enable_mask : 0;
+ u32 prev = priv->fled_torch_used, curr;
+ int ret, i;
+
+ mutex_lock(&priv->lock);
+
+ /*
+ * Only one set of flash control logic,
+ * use the flag to avoid strobe is currently used.
+ */
+ if (priv->fled_strobe_used) {
+ dev_warn(lcdev->dev, "Please disable strobe first [%d]\n",
+ priv->fled_strobe_used);
+ ret = -EBUSY;
+ goto unlock;
+ }
+
+ if (level)
+ curr = prev | BIT(led->led_no);
+ else
+ curr = prev & ~BIT(led->led_no);
+
+ if (curr)
+ val |= MT6370_TORCHEN_MASK;
+
+
+ if (level) {
+ level -= 1;
+ if (led->led_no == MT6370_LED_JOINT) {
+ int flevel[MT6370_MAX_LEDS];
+
+ flevel[0] = level / 2;
+ flevel[1] = level - flevel[0];
+ for (i = 0; i < MT6370_MAX_LEDS; i++) {
+ ret = regmap_update_bits(priv->regmap,
+ MT6370_REG_FLEDITOR(i),
+ MT6370_ITORCH_MASK, flevel[i]);
+ if (ret)
+ goto unlock;
+ }
+ } else {
+ ret = regmap_update_bits(priv->regmap,
+ MT6370_REG_FLEDITOR(led->led_no),
+ MT6370_ITORCH_MASK, level);
+ if (ret)
+ goto unlock;
+ }
+ }
+
+ ret = regmap_update_bits(priv->regmap, MT6370_REG_FLEDEN,
+ enable_mask, val);
+ if (ret)
+ goto unlock;
+
+ priv->fled_torch_used = curr;
+
+unlock:
+ mutex_unlock(&priv->lock);
+ return ret;
+}
+
+static int mt6370_flash_brightness_set(struct led_classdev_flash *fl_cdev,
+ u32 brightness)
+{
+ /*
+ * Due to the current spike when turning on flash,
+ * let brightness to be kept by framework.
+ * This empty function is used to
+ * prevent led_classdev_flash register ops check failure.
+ */
+ return 0;
+}
+
+static int _mt6370_flash_brightness_set(struct led_classdev_flash *fl_cdev,
+ u32 brightness)
+{
+ struct mt6370_led *led = to_mt6370_led(fl_cdev, flash);
+ struct mt6370_priv *priv = led->priv;
+ struct led_flash_setting *s = &fl_cdev->brightness;
+ u32 val = (brightness - s->min) / s->step;
+ int ret, i;
+
+ if (led->led_no == MT6370_LED_JOINT) {
+ int flevel[MT6370_MAX_LEDS];
+
+ flevel[0] = val / 2;
+ flevel[1] = val - flevel[0];
+ for (i = 0; i < MT6370_MAX_LEDS; i++) {
+ ret = regmap_update_bits(priv->regmap,
+ MT6370_REG_FLEDISTRB(i),
+ MT6370_ISTROBE_MASK, flevel[i]);
+ if (ret)
+ return ret;
+ }
+ } else {
+ ret = regmap_update_bits(priv->regmap,
+ MT6370_REG_FLEDISTRB(led->led_no),
+ MT6370_ISTROBE_MASK, val);
+ if (ret)
+ return ret;
+ }
+ return ret;
+}
+
+static int mt6370_strobe_set(struct led_classdev_flash *fl_cdev, bool state)
+{
+ struct mt6370_led *led = to_mt6370_led(fl_cdev, flash);
+ struct mt6370_priv *priv = led->priv;
+ struct led_classdev *lcdev = &fl_cdev->led_cdev;
+ struct led_flash_setting *s = &fl_cdev->brightness;
+ u32 led_enable_mask = (led->led_no == MT6370_LED_JOINT) ?
+ MT6370_FLCSEN_MASK_ALL :
+ MT6370_FLCSEN_MASK(led->led_no);
+ u32 enable_mask = MT6370_STROBEN_MASK | led_enable_mask;
+ u32 val = state ? led_enable_mask : 0;
+ u32 prev = priv->fled_strobe_used, curr;
+ int ret;
+
+ mutex_lock(&priv->lock);
+
+ /*
+ * Only one set of flash control logic,
+ * use the flag to avoid torch is currently used
+ */
+ if (priv->fled_torch_used) {
+ dev_warn(lcdev->dev, "Please disable torch first [0x%x]\n",
+ priv->fled_torch_used);
+ ret = -EBUSY;
+ goto unlock;
+ }
+
+ if (state)
+ curr = prev | BIT(led->led_no);
+ else
+ curr = prev & ~BIT(led->led_no);
+
+ if (curr)
+ val |= MT6370_STROBEN_MASK;
+
+ ret = regmap_update_bits(priv->regmap, MT6370_REG_FLEDEN, enable_mask,
+ val);
+ if (ret) {
+ dev_err(lcdev->dev, "[%d] control current source %d fail\n",
+ led->led_no, state);
+ goto unlock;
+ }
+
+ /*
+ * If the flash need to be on,
+ * config the flash current ramping up to the setting value
+ * Else, always recover back to the minimum one
+ */
+ ret = _mt6370_flash_brightness_set(fl_cdev, state ? s->val : s->min);
+ if (ret)
+ goto unlock;
+
+ /*
+ * For the flash turn on/off, HW ramping up/down time is 5ms/500us
+ * respectively.
+ */
+ if (!prev && curr)
+ usleep_range(5000, 6000);
+ else if (prev && !curr)
+ udelay(500);
+
+ priv->fled_strobe_used = curr;
+
+unlock:
+ mutex_unlock(&priv->lock);
+ return ret;
+}
+
+static int mt6370_strobe_get(struct led_classdev_flash *fl_cdev, bool *state)
+{
+ struct mt6370_led *led = to_mt6370_led(fl_cdev, flash);
+ struct mt6370_priv *priv = led->priv;
+
+ mutex_lock(&priv->lock);
+ *state = !!(priv->fled_strobe_used & BIT(led->led_no));
+ mutex_unlock(&priv->lock);
+
+ return 0;
+}
+
+static int mt6370_timeout_set(struct led_classdev_flash *fl_cdev, u32 timeout)
+{
+ struct mt6370_led *led = to_mt6370_led(fl_cdev, flash);
+ struct mt6370_priv *priv = led->priv;
+ struct led_flash_setting *s = &fl_cdev->timeout;
+ u32 val = (timeout - s->min) / s->step;
+ int ret;
+
+ mutex_lock(&priv->lock);
+ ret = regmap_update_bits(priv->regmap, MT6370_REG_STRBTO,
+ MT6370_STRBTO_MASK, val);
+ mutex_unlock(&priv->lock);
+
+ return ret;
+}
+
+static int mt6370_fault_get(struct led_classdev_flash *fl_cdev, u32 *fault)
+{
+ struct mt6370_led *led = to_mt6370_led(fl_cdev, flash);
+ struct mt6370_priv *priv = led->priv;
+ u16 fled_stat;
+ unsigned int chg_stat, strobe_timeout_mask, fled_short_mask;
+ u32 rfault = 0;
+ int ret;
+
+ mutex_lock(&priv->lock);
+ ret = regmap_read(priv->regmap, MT6370_REG_CHGSTAT2, &chg_stat);
+ if (ret)
+ goto unlock;
+
+ ret = regmap_raw_read(priv->regmap, MT6370_REG_FLEDSTAT1, &fled_stat,
+ sizeof(fled_stat));
+ if (ret)
+ goto unlock;
+
+ switch (led->led_no) {
+ case MT6370_LED_FLASH1:
+ strobe_timeout_mask = MT6370_FLED1STRBTO_MASK;
+ fled_short_mask = MT6370_FLED1SHORT_MASK;
+ break;
+
+ case MT6370_LED_FLASH2:
+ strobe_timeout_mask = MT6370_FLED2STRBTO_MASK;
+ fled_short_mask = MT6370_FLED2SHORT_MASK;
+ break;
+
+ case MT6370_LED_JOINT:
+ strobe_timeout_mask = MT6370_FLED1STRBTO_MASK |
+ MT6370_FLED2STRBTO_MASK;
+ fled_short_mask = MT6370_FLED1SHORT_MASK |
+ MT6370_FLED2SHORT_MASK;
+ }
+
+ if (chg_stat & MT6370_FLEDCHGVINOVP_MASK)
+ rfault |= LED_FAULT_INPUT_VOLTAGE;
+
+ if (fled_stat & strobe_timeout_mask)
+ rfault |= LED_FAULT_TIMEOUT;
+
+ if (fled_stat & fled_short_mask)
+ rfault |= LED_FAULT_SHORT_CIRCUIT;
+
+ if (fled_stat & MT6370_FLEDLVF_MASK)
+ rfault |= LED_FAULT_UNDER_VOLTAGE;
+
+ *fault = rfault;
+unlock:
+ mutex_unlock(&priv->lock);
+ return ret;
+}
+
+static const struct led_flash_ops mt6370_flash_ops = {
+ .flash_brightness_set = mt6370_flash_brightness_set,
+ .strobe_set = mt6370_strobe_set,
+ .strobe_get = mt6370_strobe_get,
+ .timeout_set = mt6370_timeout_set,
+ .fault_get = mt6370_fault_get,
+};
+
+#if IS_ENABLED(CONFIG_V4L2_FLASH_LED_CLASS)
+static int mt6370_flash_external_strobe_set(struct v4l2_flash *v4l2_flash,
+ bool enable)
+{
+ struct led_classdev_flash *flash = v4l2_flash->fled_cdev;
+ struct mt6370_led *led = to_mt6370_led(flash, flash);
+ struct mt6370_priv *priv = led->priv;
+ u32 mask = (led->led_no == MT6370_LED_JOINT) ? MT6370_FLCSEN_MASK_ALL :
+ MT6370_FLCSEN_MASK(led->led_no);
+ u32 val = enable ? mask : 0;
+ int ret;
+
+ mutex_lock(&priv->lock);
+ ret = regmap_update_bits(priv->regmap, MT6370_REG_FLEDEN, mask, val);
+ if (ret)
+ goto unlock;
+
+ if (enable)
+ priv->fled_strobe_used |= BIT(led->led_no);
+ else
+ priv->fled_strobe_used &= ~BIT(led->led_no);
+
+unlock:
+ mutex_unlock(&priv->lock);
+ return ret;
+}
+
+static const struct v4l2_flash_ops v4l2_flash_ops = {
+ .external_strobe_set = mt6370_flash_external_strobe_set,
+};
+
+static void mt6370_init_v4l2_flash_config(struct mt6370_led *led,
+ struct v4l2_flash_config *config)
+{
+ struct led_classdev *lcdev;
+ struct led_flash_setting *s = &config->intensity;
+
+ lcdev = &led->flash.led_cdev;
+
+ s->min = MT6370_ITORCH_MINUA;
+ s->step = MT6370_ITORCH_STEPUA;
+ s->val = s->max = s->min + (lcdev->max_brightness - 1) * s->step;
+
+ config->has_external_strobe = 1;
+ strscpy(config->dev_name, lcdev->dev->kobj.name,
+ sizeof(config->dev_name));
+
+ config->flash_faults = LED_FAULT_SHORT_CIRCUIT | LED_FAULT_TIMEOUT |
+ LED_FAULT_INPUT_VOLTAGE |
+ LED_FAULT_UNDER_VOLTAGE;
+}
+#else
+static const struct v4l2_flash_ops v4l2_flash_ops;
+static void mt6370_init_v4l2_flash_config(struct mt6370_led *led,
+ struct v4l2_flash_config *config)
+{
+}
+#endif
+
+static int mt6370_led_register(struct device *parent, struct mt6370_led *led,
+ struct led_init_data *init_data)
+{
+ struct v4l2_flash_config v4l2_config = {0};
+ int ret;
+
+ ret = devm_led_classdev_flash_register_ext(parent, &led->flash,
+ init_data);
+ if (ret) {
+ dev_err(parent, "Couldn't register flash %d\n", led->led_no);
+ return ret;
+ }
+
+ mt6370_init_v4l2_flash_config(led, &v4l2_config);
+ led->v4l2_flash = v4l2_flash_init(parent, init_data->fwnode,
+ &led->flash, &v4l2_flash_ops,
+ &v4l2_config);
+ if (IS_ERR(led->v4l2_flash)) {
+ dev_err(parent, "Failed to register %d v4l2 sd\n", led->led_no);
+ return PTR_ERR(led->v4l2_flash);
+ }
+
+ return 0;
+}
+
+static u32 clamp_align(u32 val, u32 min, u32 max, u32 step)
+{
+ u32 retval;
+
+ retval = clamp_val(val, min, max);
+ if (step > 1)
+ retval = rounddown(retval - min, step) + min;
+
+ return retval;
+}
+
+static int mt6370_init_flash_properties(struct mt6370_led *led,
+ struct led_init_data *init_data)
+{
+ struct led_classdev_flash *flash = &led->flash;
+ struct led_classdev *lcdev = &flash->led_cdev;
+ struct mt6370_priv *priv = led->priv;
+ struct led_flash_setting *s;
+ u32 sources[MT6370_MAX_LEDS];
+ u32 max_uA, val;
+ int i, ret, num;
+
+ num = fwnode_property_count_u32(init_data->fwnode, "led-sources");
+ if (num < 1 || num > MT6370_MAX_LEDS) {
+ dev_err(priv->dev,
+ "Not specified or wrong number of led-sources\n");
+ return -EINVAL;
+ }
+
+ ret = fwnode_property_read_u32_array(init_data->fwnode,
+ "led-sources", sources, num);
+ if (ret)
+ return ret;
+
+ for (i = 0; i < num; i++) {
+ if (sources[i] >= MT6370_MAX_LEDS)
+ return -EINVAL;
+ if (priv->leds_active & BIT(sources[i]))
+ return -EINVAL;
+ priv->leds_active |= BIT(sources[i]);
+
+ }
+ led->led_no = (num == MT6370_MAX_LEDS) ? MT6370_LED_JOINT :
+ sources[0];
+
+ max_uA = (num == 2) ? MT6370_ITORCH_DOUBLE_MAXUA : MT6370_ITORCH_MAXUA;
+ ret = fwnode_property_read_u32(init_data->fwnode, "led-max-microamp",
+ &val);
+ if (ret) {
+ dev_warn(priv->dev,
+ "Not specified led-max-microamp, config to the minimum\n");
+ val = MT6370_ITORCH_MINUA;
+ } else
+ val = clamp_align(val, MT6370_ITORCH_MINUA, max_uA,
+ MT6370_ITORCH_STEPUA);
+
+ lcdev->max_brightness = (val - MT6370_ITORCH_MINUA) /
+ MT6370_ITORCH_STEPUA + 1;
+ lcdev->brightness_set_blocking = mt6370_torch_brightness_set;
+ lcdev->flags |= LED_DEV_CAP_FLASH;
+
+ max_uA = (num == 2) ? MT6370_ISTRB_DOUBLE_MAXUA : MT6370_ISTRB_MAXUA;
+ ret = fwnode_property_read_u32(init_data->fwnode, "flash-max-microamp",
+ &val);
+ if (ret) {
+ dev_warn(priv->dev,
+ "Not specified flash-max-microamp, config to the minimum\n");
+ val = MT6370_ISTRB_MINUA;
+ } else
+ val = clamp_align(val, MT6370_ISTRB_MINUA, max_uA,
+ MT6370_ISTRB_STEPUA);
+
+ s = &flash->brightness;
+ s->min = MT6370_ISTRB_MINUA;
+ s->step = MT6370_ISTRB_STEPUA;
+ s->val = s->max = val;
+
+ /*
+ * Always configure as min level when off to
+ * prevent flash current spike
+ */
+ ret = _mt6370_flash_brightness_set(flash, s->min);
+ if (ret)
+ return ret;
+
+ ret = fwnode_property_read_u32(init_data->fwnode,
+ "flash-max-timeout-us", &val);
+ if (ret) {
+ dev_warn(priv->dev,
+ "Not specified flash-max-timeout-us, config to the minimum\n");
+ val = MT6370_STRBTO_MINUS;
+ } else
+ val = clamp_align(val, MT6370_STRBTO_MINUS, MT6370_STRBTO_MAXUS,
+ MT6370_STRBTO_STEPUS);
+
+
+ s = &flash->timeout;
+ s->min = MT6370_STRBTO_MINUS;
+ s->step = MT6370_STRBTO_STEPUS;
+ s->val = s->max = val;
+
+ flash->ops = &mt6370_flash_ops;
+
+ return 0;
+}
+
+static int mt6370_init_common_properties(struct mt6370_led *led,
+ struct led_init_data *init_data)
+{
+ const char * const states[] = { "off", "keep", "on" };
+ const char *str = states[STATE_OFF];
+ int ret;
+
+ fwnode_property_read_string(init_data->fwnode, "default-state", &str);
+ ret = match_string(states, ARRAY_SIZE(states), str);
+ if (ret >= 0)
+ led->default_state = ret;
+
+ return 0;
+}
+
+static void mt6370_v4l2_flash_release(struct mt6370_priv *priv)
+{
+ int i;
+
+ for (i = 0; i < priv->leds_count; i++) {
+ struct mt6370_led *led = priv->leds + i;
+
+ if (led->v4l2_flash)
+ v4l2_flash_release(led->v4l2_flash);
+ }
+}
+
+static int mt6370_led_probe(struct platform_device *pdev)
+{
+ struct mt6370_priv *priv;
+ struct fwnode_handle *child;
+ size_t count;
+ int i = 0, ret;
+
+ count = device_get_child_node_count(&pdev->dev);
+ if (!count || count > MT6370_MAX_LEDS)
+ return dev_err_probe(&pdev->dev, -EINVAL,
+ "No child node or node count over max led number %zu\n",
+ count);
+
+ priv = devm_kzalloc(&pdev->dev, struct_size(priv, leds, count),
+ GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ priv->leds_count = count;
+ priv->dev = &pdev->dev;
+ mutex_init(&priv->lock);
+
+ priv->regmap = dev_get_regmap(pdev->dev.parent, NULL);
+ if (!priv->regmap)
+ return dev_err_probe(&pdev->dev, -ENODEV,
+ "Failed to get parent regmap\n");
+
+ device_for_each_child_node(&pdev->dev, child) {
+ struct mt6370_led *led = priv->leds + i;
+ struct led_init_data init_data = { .fwnode = child, };
+
+ led->priv = priv;
+ ret = mt6370_init_common_properties(led, &init_data);
+ if (ret)
+ goto out_flash_release;
+
+ ret = mt6370_init_flash_properties(led, &init_data);
+
+ if (ret)
+ goto out_flash_release;
+
+ ret = mt6370_led_register(&pdev->dev, led, &init_data);
+ if (ret)
+ goto out_flash_release;
+
+ i++;
+ }
+
+ platform_set_drvdata(pdev, priv);
+ return 0;
+
+out_flash_release:
+ mt6370_v4l2_flash_release(priv);
+ return ret;
+}
+
+static int mt6370_led_remove(struct platform_device *pdev)
+{
+ struct mt6370_priv *priv = platform_get_drvdata(pdev);
+
+ mt6370_v4l2_flash_release(priv);
+ return 0;
+}
+
+static const struct of_device_id __maybe_unused mt6370_led_of_id[] = {
+ { .compatible = "mediatek,mt6370-flashlight", },
+ {}
+};
+MODULE_DEVICE_TABLE(of, mt6370_led_of_id);
+
+static struct platform_driver mt6370_led_driver = {
+ .driver = {
+ .name = "mt6370-flashlight",
+ .of_match_table = mt6370_led_of_id,
+ },
+ .probe = mt6370_led_probe,
+ .remove = mt6370_led_remove,
+};
+module_platform_driver(mt6370_led_driver);
+
+MODULE_AUTHOR("Alice Chen <[email protected]>");
+MODULE_DESCRIPTION("MT6370 FLASH LED Driver");
+MODULE_LICENSE("GPL v2");
--
2.7.4
From: ChiaEn Wu <[email protected]>
Add Mediatek MT6370 Charger binding documentation.
Signed-off-by: ChiaEn Wu <[email protected]>
---
v3
- Add items and remove maxItems of io-channels
- Add io-channel-names and describe each item
- Add "unevaluatedProperties: false" in "usb-otg-vbus-regulator"
- Rename "enable-gpio" to "enable-gpios" in "usb-otg-vbus-regulator"
---
.../power/supply/mediatek,mt6370-charger.yaml | 87 ++++++++++++++++++++++
1 file changed, 87 insertions(+)
create mode 100644 Documentation/devicetree/bindings/power/supply/mediatek,mt6370-charger.yaml
diff --git a/Documentation/devicetree/bindings/power/supply/mediatek,mt6370-charger.yaml b/Documentation/devicetree/bindings/power/supply/mediatek,mt6370-charger.yaml
new file mode 100644
index 0000000..f138db6
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/mediatek,mt6370-charger.yaml
@@ -0,0 +1,87 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/mediatek,mt6370-charger.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek MT6370 Battery Charger
+
+maintainers:
+ - ChiaEn Wu <[email protected]>
+
+description: |
+ This module is part of the MT6370 MFD device.
+ Provides Battery Charger, Boost for OTG devices and BC1.2 detection.
+
+properties:
+ compatible:
+ const: mediatek,mt6370-charger
+
+ interrupts:
+ description: |
+ Specify what irqs are needed to be handled by MT6370 Charger driver. IRQ
+ "MT6370_IRQ_CHG_MIVR", "MT6370_IRQ_ATTACH" and "MT6370_IRQ_OVPCTRL_UVP_D"
+ are required.
+ items:
+ - description: BC1.2 done irq
+ - description: usb plug in irq
+ - description: mivr irq
+
+ interrupt-names:
+ items:
+ - const: attach_i
+ - const: uvp_d_evt
+ - const: mivr
+
+ io-channels:
+ description: |
+ Use ADC channel to read VBUS, IBUS, IBAT, etc., info.
+ minItems: 1
+ items:
+ - description: |
+ VBUS voltage with lower accuracy (+-75mV) but higher measure
+ range (1~22V)
+ - description: |
+ VBUS voltage with higher accuracy (+-30mV) but lower measure
+ range (1~9.76V)
+ - description: the main system input voltage
+ - description: battery voltage
+ - description: battery temperature-sense input voltage
+ - description: IBUS current (required)
+ - description: battery current
+ - description: |
+ regulated output voltage to supply for the PWM low-side gate driver
+ and the bootstrap capacitor
+ - description: IC junction temperature
+
+ io-channel-names:
+ items:
+ - const: vbusdiv5
+ - const: vbusdiv2
+ - const: vsys
+ - const: vbat
+ - const: ts_bat
+ - const: ibus
+ - const: ibat
+ - const: chg_vddp
+ - const: temp_jc
+
+ usb-otg-vbus-regulator:
+ type: object
+ description: OTG boost regulator.
+ unevaluatedProperties: false
+ $ref: /schemas/regulator/regulator.yaml#
+
+ properties:
+ enable-gpios:
+ maxItems: 1
+
+required:
+ - compatible
+ - interrupts
+ - interrupt-names
+ - io-channels
+
+additionalProperties: false
+
+...
--
2.7.4
From: ChiYuan Huang <[email protected]>
Add Mediatek MT6370 current sink type LED Indicator driver.
Signed-off-by: ChiYuan Huang <[email protected]>
---
v3
- Refine the grammer of the Kconfig.
- Change reg mode to the const current mode.
---
drivers/leds/Kconfig | 11 +
drivers/leds/Makefile | 1 +
drivers/leds/leds-mt6370.c | 989 +++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 1001 insertions(+)
create mode 100644 drivers/leds/leds-mt6370.c
diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
index a49979f..a8c58c3 100644
--- a/drivers/leds/Kconfig
+++ b/drivers/leds/Kconfig
@@ -244,6 +244,17 @@ config LEDS_MT6323
This option enables support for on-chip LED drivers found on
Mediatek MT6323 PMIC.
+config LEDS_MT6370_RGB
+ tristate "LED Support for Mediatek MT6370 PMIC"
+ depends on LEDS_CLASS
+ depends on MFD_MT6370
+ select LINEAR_RANGE
+ help
+ Say Y here to enable support for MT6370_RGB LED device.
+ In MT6370, there are four channel current-sink LED drivers that
+ support hardware pattern for const current, PWM, and breath mode.
+ Isink4 channel can also be used as a CHG_VIN power good indicator.
+
config LEDS_S3C24XX
tristate "LED Support for Samsung S3C24XX GPIO LEDs"
depends on LEDS_CLASS
diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile
index 4fd2f92..557be42 100644
--- a/drivers/leds/Makefile
+++ b/drivers/leds/Makefile
@@ -62,6 +62,7 @@ obj-$(CONFIG_LEDS_MIKROTIK_RB532) += leds-rb532.o
obj-$(CONFIG_LEDS_MLXCPLD) += leds-mlxcpld.o
obj-$(CONFIG_LEDS_MLXREG) += leds-mlxreg.o
obj-$(CONFIG_LEDS_MT6323) += leds-mt6323.o
+obj-$(CONFIG_LEDS_MT6370_RGB) += leds-mt6370.o
obj-$(CONFIG_LEDS_NET48XX) += leds-net48xx.o
obj-$(CONFIG_LEDS_NETXBIG) += leds-netxbig.o
obj-$(CONFIG_LEDS_NIC78BX) += leds-nic78bx.o
diff --git a/drivers/leds/leds-mt6370.c b/drivers/leds/leds-mt6370.c
new file mode 100644
index 0000000..2bed5e2
--- /dev/null
+++ b/drivers/leds/leds-mt6370.c
@@ -0,0 +1,989 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+#include <linux/bitops.h>
+#include <linux/kernel.h>
+#include <linux/led-class-multicolor.h>
+#include <linux/linear_range.h>
+#include <linux/mod_devicetable.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/platform_device.h>
+#include <linux/property.h>
+#include <linux/regmap.h>
+
+enum {
+ MT6370_LED_ISNK1 = 0,
+ MT6370_LED_ISNK2,
+ MT6370_LED_ISNK3,
+ MT6370_LED_ISNK4,
+ MT6370_MAX_LEDS
+};
+
+enum mt6370_led_mode {
+ MT6370_LED_PWM_MODE = 0,
+ MT6370_LED_BREATH_MODE,
+ MT6370_LED_REG_MODE,
+ MT6370_LED_MAX_MODE
+};
+
+enum mt6370_led_field {
+ F_RGB_EN = 0,
+ F_CHGIND_EN,
+ F_LED1_CURR,
+ F_LED2_CURR,
+ F_LED3_CURR,
+ F_LED4_CURR,
+ F_LED1_MODE,
+ F_LED2_MODE,
+ F_LED3_MODE,
+ F_LED4_MODE,
+ F_LED1_DUTY,
+ F_LED2_DUTY,
+ F_LED3_DUTY,
+ F_LED4_DUTY,
+ F_LED1_FREQ,
+ F_LED2_FREQ,
+ F_LED3_FREQ,
+ F_LED4_FREQ,
+ F_MAX_FIELDS
+};
+
+enum mt6370_led_ranges {
+ R_LED123_CURR = 0,
+ R_LED4_CURR,
+ R_LED_TRFON,
+ R_LED_TOFF,
+ R_MAX_RANGES,
+};
+
+enum mt6370_pattern {
+ P_LED_TR1 = 0,
+ P_LED_TR2,
+ P_LED_TF1,
+ P_LED_TF2,
+ P_LED_TON,
+ P_LED_TOFF,
+ P_MAX_PATTERNS
+};
+
+#define MT6370_REG_DEV_INFO 0x100
+#define MT6370_REG_RGB1_DIM 0x182
+#define MT6370_REG_RGB2_DIM 0x183
+#define MT6370_REG_RGB3_DIM 0x184
+#define MT6370_REG_RGB_EN 0x185
+#define MT6370_REG_RGB1_ISNK 0x186
+#define MT6370_REG_RGB2_ISNK 0x187
+#define MT6370_REG_RGB3_ISNK 0x188
+#define MT6370_REG_RGB1_TR 0x189
+#define MT6370_REG_RGB_CHRIND_DIM 0x192
+#define MT6370_REG_RGB_CHRIND_CTRL 0x193
+#define MT6370_REG_RGB_CHRIND_TR 0x194
+
+#define MT6372_REG_RGB_EN 0x182
+#define MT6372_REG_RGB1_ISNK 0x183
+#define MT6372_REG_RGB2_ISNK 0x184
+#define MT6372_REG_RGB3_ISNK 0x185
+#define MT6372_REG_RGB4_ISNK 0x186
+#define MT6372_REG_RGB1_DIM 0x187
+#define MT6372_REG_RGB2_DIM 0x188
+#define MT6372_REG_RGB3_DIM 0x189
+#define MT6372_REG_RGB4_DIM 0x18A
+#define MT6372_REG_RGB12_FREQ 0x18B
+#define MT6372_REG_RGB34_FREQ 0x18C
+#define MT6372_REG_RGB1_TR 0x18D
+
+#define MT6370_VENID_MASK GENMASK(7, 4)
+#define MT6370_CHEN_BIT(id) BIT(MT6370_LED_ISNK4 - id)
+#define MT6370_VIRTUAL_MULTICOLOR 5
+#define MC_CHANNEL_NUM 3
+#define MT6370_PWM_DUTY 31
+#define MT6372_PMW_DUTY 255
+
+#define STATE_OFF 0
+#define STATE_KEEP 1
+#define STATE_ON 2
+
+struct mt6370_led {
+ union {
+ struct led_classdev isink;
+ struct led_classdev_mc mc;
+ };
+ struct mt6370_priv *priv;
+ u32 default_state;
+ u32 index;
+};
+
+struct mt6370_priv {
+ /* Per LED access lock */
+ struct mutex lock;
+ struct device *dev;
+ struct regmap *regmap;
+ struct regmap_field *fields[F_MAX_FIELDS];
+ const struct reg_field *reg_fields;
+ const struct linear_range *ranges;
+ struct reg_cfg *reg_cfgs;
+ unsigned int leds_count;
+ unsigned int leds_active;
+ bool is_mt6372;
+ struct mt6370_led leds[];
+};
+
+static const struct reg_field common_reg_fields[F_MAX_FIELDS] = {
+ [F_RGB_EN] = REG_FIELD(MT6370_REG_RGB_EN, 4, 7),
+ [F_CHGIND_EN] = REG_FIELD(MT6370_REG_RGB_CHRIND_DIM, 7, 7),
+ [F_LED1_CURR] = REG_FIELD(MT6370_REG_RGB1_ISNK, 0, 2),
+ [F_LED2_CURR] = REG_FIELD(MT6370_REG_RGB2_ISNK, 0, 2),
+ [F_LED3_CURR] = REG_FIELD(MT6370_REG_RGB3_ISNK, 0, 2),
+ [F_LED4_CURR] = REG_FIELD(MT6370_REG_RGB_CHRIND_CTRL, 0, 1),
+ [F_LED1_MODE] = REG_FIELD(MT6370_REG_RGB1_DIM, 5, 6),
+ [F_LED2_MODE] = REG_FIELD(MT6370_REG_RGB2_DIM, 5, 6),
+ [F_LED3_MODE] = REG_FIELD(MT6370_REG_RGB3_DIM, 5, 6),
+ [F_LED4_MODE] = REG_FIELD(MT6370_REG_RGB_CHRIND_DIM, 5, 6),
+ [F_LED1_DUTY] = REG_FIELD(MT6370_REG_RGB1_DIM, 0, 4),
+ [F_LED2_DUTY] = REG_FIELD(MT6370_REG_RGB2_DIM, 0, 4),
+ [F_LED3_DUTY] = REG_FIELD(MT6370_REG_RGB3_DIM, 0, 4),
+ [F_LED4_DUTY] = REG_FIELD(MT6370_REG_RGB_CHRIND_DIM, 0, 4),
+ [F_LED1_FREQ] = REG_FIELD(MT6370_REG_RGB1_ISNK, 3, 5),
+ [F_LED2_FREQ] = REG_FIELD(MT6370_REG_RGB2_ISNK, 3, 5),
+ [F_LED3_FREQ] = REG_FIELD(MT6370_REG_RGB3_ISNK, 3, 5),
+ [F_LED4_FREQ] = REG_FIELD(MT6370_REG_RGB_CHRIND_CTRL, 2, 4)
+};
+
+static const struct reg_field mt6372_reg_fields[F_MAX_FIELDS] = {
+ [F_RGB_EN] = REG_FIELD(MT6372_REG_RGB_EN, 4, 7),
+ [F_CHGIND_EN] = REG_FIELD(MT6372_REG_RGB_EN, 3, 3),
+ [F_LED1_CURR] = REG_FIELD(MT6372_REG_RGB1_ISNK, 0, 3),
+ [F_LED2_CURR] = REG_FIELD(MT6372_REG_RGB2_ISNK, 0, 3),
+ [F_LED3_CURR] = REG_FIELD(MT6372_REG_RGB3_ISNK, 0, 3),
+ [F_LED4_CURR] = REG_FIELD(MT6372_REG_RGB4_ISNK, 0, 3),
+ [F_LED1_MODE] = REG_FIELD(MT6372_REG_RGB1_ISNK, 6, 7),
+ [F_LED2_MODE] = REG_FIELD(MT6372_REG_RGB2_ISNK, 6, 7),
+ [F_LED3_MODE] = REG_FIELD(MT6372_REG_RGB3_ISNK, 6, 7),
+ [F_LED4_MODE] = REG_FIELD(MT6372_REG_RGB4_ISNK, 6, 7),
+ [F_LED1_DUTY] = REG_FIELD(MT6372_REG_RGB1_DIM, 0, 7),
+ [F_LED2_DUTY] = REG_FIELD(MT6372_REG_RGB2_DIM, 0, 7),
+ [F_LED3_DUTY] = REG_FIELD(MT6372_REG_RGB3_DIM, 0, 7),
+ [F_LED4_DUTY] = REG_FIELD(MT6372_REG_RGB4_DIM, 0, 7),
+ [F_LED1_FREQ] = REG_FIELD(MT6372_REG_RGB12_FREQ, 5, 7),
+ [F_LED2_FREQ] = REG_FIELD(MT6372_REG_RGB12_FREQ, 2, 4),
+ [F_LED3_FREQ] = REG_FIELD(MT6372_REG_RGB34_FREQ, 5, 7),
+ [F_LED4_FREQ] = REG_FIELD(MT6372_REG_RGB34_FREQ, 2, 4)
+};
+
+/* Current unit: microamp, time unit: millisecond */
+static const struct linear_range common_led_ranges[R_MAX_RANGES] = {
+ [R_LED123_CURR] = { 4000, 1, 6, 4000 },
+ [R_LED4_CURR] = { 2000, 1, 3, 2000 },
+ [R_LED_TRFON] = { 125, 0, 15, 200 },
+ [R_LED_TOFF] = { 250, 0, 15, 400 }
+};
+
+static const struct linear_range mt6372_led_ranges[R_MAX_RANGES] = {
+ [R_LED123_CURR] = { 2000, 1, 14, 2000 },
+ [R_LED4_CURR] = { 2000, 1, 14, 2000 },
+ [R_LED_TRFON] = { 125, 0, 15, 250 },
+ [R_LED_TOFF] = { 250, 0, 15, 500 }
+};
+
+static enum mt6370_led_field mt6370_get_led_current_field(unsigned int led_no)
+{
+ switch (led_no) {
+ case MT6370_LED_ISNK1:
+ return F_LED1_CURR;
+ case MT6370_LED_ISNK2:
+ return F_LED2_CURR;
+ case MT6370_LED_ISNK3:
+ return F_LED3_CURR;
+ default:
+ return F_LED4_CURR;
+ }
+}
+
+static int mt6370_set_led_brightness(struct mt6370_priv *priv,
+ unsigned int led_no, unsigned int level)
+{
+ enum mt6370_led_field sel_field;
+
+ sel_field = mt6370_get_led_current_field(led_no);
+
+ return regmap_field_write(priv->fields[sel_field], level);
+}
+
+static int mt6370_get_led_brightness(struct mt6370_priv *priv,
+ unsigned int led_no, unsigned int *level)
+{
+ enum mt6370_led_field sel_field;
+
+ sel_field = mt6370_get_led_current_field(led_no);
+
+ return regmap_field_read(priv->fields[sel_field], level);
+}
+
+static int mt6370_set_led_duty(struct mt6370_priv *priv, unsigned int led_no,
+ unsigned int ton, unsigned int toff)
+{
+ enum mt6370_led_field sel_field;
+ unsigned int divisor, ratio;
+
+ divisor = priv->is_mt6372 ? MT6372_PMW_DUTY : MT6370_PWM_DUTY;
+ ratio = ton * divisor / (ton + toff);
+
+ switch (led_no) {
+ case MT6370_LED_ISNK1:
+ sel_field = F_LED1_DUTY;
+ break;
+ case MT6370_LED_ISNK2:
+ sel_field = F_LED2_DUTY;
+ break;
+ case MT6370_LED_ISNK3:
+ sel_field = F_LED3_DUTY;
+ break;
+ default:
+ sel_field = F_LED4_DUTY;
+ }
+
+ return regmap_field_write(priv->fields[sel_field], ratio);
+}
+
+static const unsigned int common_tfreqs[] = {
+ 10000, 5000, 2000, 1000, 500, 200, 5, 1,
+};
+
+static const unsigned int mt6372_tfreqs[] = {
+ 8000, 4000, 2000, 1000, 500, 250, 8, 4,
+};
+
+static int mt6370_set_led_freq(struct mt6370_priv *priv, unsigned int led_no,
+ unsigned int ton, unsigned int toff)
+{
+ enum mt6370_led_field sel_field;
+ const unsigned int *tfreq;
+ unsigned int tfreq_len, tsum;
+ int i;
+
+ if (priv->is_mt6372) {
+ tfreq = mt6372_tfreqs;
+ tfreq_len = ARRAY_SIZE(mt6372_tfreqs);
+ } else {
+ tfreq = common_tfreqs;
+ tfreq_len = ARRAY_SIZE(common_tfreqs);
+ }
+
+ tsum = ton + toff;
+
+ if (tsum > tfreq[0] || tsum < tfreq[tfreq_len - 1])
+ return -EOPNOTSUPP;
+
+ for (i = 0; i < tfreq_len; i++) {
+ if (tsum >= tfreq[i])
+ break;
+ }
+
+ switch (led_no) {
+ case MT6370_LED_ISNK1:
+ sel_field = F_LED1_FREQ;
+ break;
+ case MT6370_LED_ISNK2:
+ sel_field = F_LED2_FREQ;
+ break;
+ case MT6370_LED_ISNK3:
+ sel_field = F_LED3_FREQ;
+ break;
+ default:
+ sel_field = F_LED4_FREQ;
+ }
+
+ return regmap_field_write(priv->fields[sel_field], i);
+}
+
+static void mt6370_get_breath_reg_base(struct mt6370_priv *priv,
+ unsigned int led_no, unsigned int *base)
+{
+ if (priv->is_mt6372) {
+ *base = MT6372_REG_RGB1_TR + led_no * 3;
+ return;
+ }
+
+ switch (led_no) {
+ case MT6370_LED_ISNK1:
+ case MT6370_LED_ISNK2:
+ case MT6370_LED_ISNK3:
+ *base = MT6370_REG_RGB1_TR + led_no * 3;
+ break;
+ default:
+ *base = MT6370_REG_RGB_CHRIND_TR;
+ }
+}
+
+static int mt6370_gen_breath_pattern(struct mt6370_priv *priv,
+ struct led_pattern *pattern, u32 len,
+ u8 *pattern_val, u32 val_len)
+{
+ enum mt6370_led_ranges sel_range;
+ struct led_pattern *curr;
+ unsigned int sel;
+ u8 val[P_MAX_PATTERNS / 2] = {0};
+ int i;
+
+ if (len < P_MAX_PATTERNS && val_len < P_MAX_PATTERNS / 2)
+ return -EINVAL;
+
+ /*
+ * Pattern list
+ * tr1: byte 0, b'[7: 4]
+ * tr2: byte 0, b'[3: 0]
+ * tf1: byte 1, b'[7: 4]
+ * tf2: byte 1, b'[3: 0]
+ * ton: byte 2, b'[7: 4]
+ * toff: byte 2, b'[3: 0]
+ */
+ for (i = 0; i < P_MAX_PATTERNS; i++) {
+ curr = pattern + i;
+
+ sel_range = i == P_LED_TOFF ? R_LED_TOFF : R_LED_TRFON;
+
+ linear_range_get_selector_within(priv->ranges + sel_range,
+ curr->delta_t, &sel);
+
+ val[i / 2] |= sel << (4 * ((i + 1) % 2));
+ }
+
+ memcpy(pattern_val, val, 3);
+ return 0;
+}
+
+static int mt6370_set_led_mode(struct mt6370_priv *priv, unsigned int led_no,
+ enum mt6370_led_mode mode)
+{
+ enum mt6370_led_field sel_field;
+
+ switch (led_no) {
+ case MT6370_LED_ISNK1:
+ sel_field = F_LED1_MODE;
+ break;
+ case MT6370_LED_ISNK2:
+ sel_field = F_LED2_MODE;
+ break;
+ case MT6370_LED_ISNK3:
+ sel_field = F_LED3_MODE;
+ break;
+ default:
+ sel_field = F_LED4_MODE;
+ }
+
+ return regmap_field_write(priv->fields[sel_field], mode);
+}
+
+static int mt6370_mc_brightness_set(struct led_classdev *lcdev,
+ enum led_brightness level)
+{
+ struct led_classdev_mc *mccdev = lcdev_to_mccdev(lcdev);
+ struct mt6370_led *led = container_of(mccdev, struct mt6370_led, mc);
+ struct mt6370_priv *priv = led->priv;
+ struct mc_subled *subled;
+ unsigned int enable, disable;
+ int i, ret;
+
+ mutex_lock(&priv->lock);
+
+ led_mc_calc_color_components(mccdev, level);
+
+ ret = regmap_field_read(priv->fields[F_RGB_EN], &enable);
+ if (ret)
+ goto out;
+
+ disable = enable;
+
+ for (i = 0; i < mccdev->num_colors; i++) {
+ u32 brightness;
+
+ subled = mccdev->subled_info + i;
+ brightness = min(subled->brightness, lcdev->max_brightness);
+ disable &= ~MT6370_CHEN_BIT(subled->channel);
+
+ if (level == LED_OFF) {
+ enable &= ~MT6370_CHEN_BIT(subled->channel);
+
+ ret = mt6370_set_led_mode(priv, subled->channel,
+ MT6370_LED_REG_MODE);
+ if (ret)
+ goto out;
+
+ continue;
+ }
+
+ if (brightness == LED_OFF) {
+ enable &= ~MT6370_CHEN_BIT(subled->channel);
+ continue;
+ }
+
+ enable |= MT6370_CHEN_BIT(subled->channel);
+
+ ret = mt6370_set_led_brightness(priv, subled->channel,
+ brightness);
+ if (ret)
+ goto out;
+ }
+
+ ret = regmap_field_write(priv->fields[F_RGB_EN], disable);
+ if (ret)
+ goto out;
+
+ ret = regmap_field_write(priv->fields[F_RGB_EN], enable);
+
+out:
+ mutex_unlock(&priv->lock);
+
+ return ret;
+}
+
+static int mt6370_mc_blink_set(struct led_classdev *lcdev,
+ unsigned long *delay_on,
+ unsigned long *delay_off)
+{
+ struct led_classdev_mc *mccdev = lcdev_to_mccdev(lcdev);
+ struct mt6370_led *led = container_of(mccdev, struct mt6370_led, mc);
+ struct mt6370_priv *priv = led->priv;
+ struct mc_subled *subled;
+ unsigned int enable, disable;
+ int i, ret;
+
+ mutex_lock(&priv->lock);
+
+ if (!*delay_on && !*delay_off)
+ *delay_on = *delay_off = 500;
+
+ ret = regmap_field_read(priv->fields[F_RGB_EN], &enable);
+ if (ret)
+ goto out;
+
+ disable = enable;
+
+ for (i = 0; i < mccdev->num_colors; i++) {
+ subled = mccdev->subled_info + i;
+
+ disable &= ~MT6370_CHEN_BIT(subled->channel);
+
+ ret = mt6370_set_led_duty(priv, subled->channel, *delay_on,
+ *delay_off);
+ if (ret)
+ goto out;
+
+ ret = mt6370_set_led_freq(priv, subled->channel, *delay_on,
+ *delay_off);
+ if (ret)
+ goto out;
+
+ ret = mt6370_set_led_mode(priv, subled->channel,
+ MT6370_LED_PWM_MODE);
+ if (ret)
+ goto out;
+ }
+
+ /* Toggle to make pattern timing the same */
+ ret = regmap_field_write(priv->fields[F_RGB_EN], disable);
+ if (ret)
+ goto out;
+
+ ret = regmap_field_write(priv->fields[F_RGB_EN], enable);
+
+out:
+ mutex_unlock(&priv->lock);
+
+ return ret;
+}
+
+static int mt6370_mc_pattern_set(struct led_classdev *lcdev,
+ struct led_pattern *pattern, u32 len, int repeat)
+{
+ struct led_classdev_mc *mccdev = lcdev_to_mccdev(lcdev);
+ struct mt6370_led *led = container_of(mccdev, struct mt6370_led, mc);
+ struct mt6370_priv *priv = led->priv;
+ struct mc_subled *subled;
+ unsigned int reg_base, enable, disable;
+ u8 params[P_MAX_PATTERNS / 2];
+ int i, ret;
+
+ mutex_lock(&priv->lock);
+
+ ret = mt6370_gen_breath_pattern(priv, pattern, len, params,
+ sizeof(params));
+ if (ret)
+ goto out;
+
+ ret = regmap_field_read(priv->fields[F_RGB_EN], &enable);
+ if (ret)
+ goto out;
+
+ disable = enable;
+
+ for (i = 0; i < mccdev->num_colors; i++) {
+ subled = mccdev->subled_info + i;
+
+ mt6370_get_breath_reg_base(priv, subled->channel, ®_base);
+ disable &= ~MT6370_CHEN_BIT(subled->channel);
+
+ ret = regmap_raw_write(priv->regmap, reg_base, params,
+ sizeof(params));
+ if (ret)
+ goto out;
+
+ ret = mt6370_set_led_mode(priv, subled->channel,
+ MT6370_LED_BREATH_MODE);
+ if (ret)
+ goto out;
+ }
+
+ /* Toggle to make pattern timing be the same */
+ ret = regmap_field_write(priv->fields[F_RGB_EN], disable);
+ if (ret)
+ goto out;
+
+ ret = regmap_field_write(priv->fields[F_RGB_EN], enable);
+
+out:
+ mutex_unlock(&priv->lock);
+
+ return ret;
+}
+
+static inline int mt6370_mc_pattern_clear(struct led_classdev *lcdev)
+{
+ struct led_classdev_mc *mccdev = lcdev_to_mccdev(lcdev);
+ struct mt6370_led *led = container_of(mccdev, struct mt6370_led, mc);
+ struct mt6370_priv *priv = led->priv;
+ struct mc_subled *subled;
+ int i, ret = 0;
+
+ mutex_lock(&led->priv->lock);
+
+ for (i = 0; i < mccdev->num_colors; i++) {
+ subled = mccdev->subled_info + i;
+
+ ret = mt6370_set_led_mode(priv, subled->channel,
+ MT6370_LED_REG_MODE);
+ if (ret)
+ break;
+ }
+
+ mutex_unlock(&led->priv->lock);
+
+ return ret;
+}
+
+static int mt6370_isnk_brightness_set(struct led_classdev *lcdev,
+ enum led_brightness level)
+{
+ struct mt6370_led *led = container_of(lcdev, struct mt6370_led, isink);
+ struct mt6370_priv *priv = led->priv;
+ unsigned int enable;
+ int ret;
+
+ mutex_lock(&priv->lock);
+
+ ret = regmap_field_read(priv->fields[F_RGB_EN], &enable);
+ if (ret)
+ goto out;
+
+ if (level == LED_OFF) {
+ enable &= ~MT6370_CHEN_BIT(led->index);
+
+ ret = mt6370_set_led_mode(priv, led->index,
+ MT6370_LED_REG_MODE);
+ if (ret)
+ goto out;
+
+ ret = regmap_field_write(priv->fields[F_RGB_EN], enable);
+ } else {
+ enable |= MT6370_CHEN_BIT(led->index);
+
+ ret = mt6370_set_led_brightness(priv, led->index, level);
+ if (ret)
+ goto out;
+
+ ret = regmap_field_write(priv->fields[F_RGB_EN], enable);
+ }
+
+out:
+ mutex_unlock(&priv->lock);
+
+ return ret;
+}
+
+static int mt6370_isnk_blink_set(struct led_classdev *lcdev,
+ unsigned long *delay_on,
+ unsigned long *delay_off)
+{
+ struct mt6370_led *led = container_of(lcdev, struct mt6370_led, isink);
+ struct mt6370_priv *priv = led->priv;
+ int ret;
+
+ mutex_lock(&priv->lock);
+
+ if (!*delay_on && !*delay_off)
+ *delay_on = *delay_off = 500;
+
+ ret = mt6370_set_led_duty(priv, led->index, *delay_on, *delay_off);
+ if (ret)
+ goto out;
+
+ ret = mt6370_set_led_freq(priv, led->index, *delay_on, *delay_off);
+ if (ret)
+ goto out;
+
+ ret = mt6370_set_led_mode(priv, led->index, MT6370_LED_PWM_MODE);
+
+out:
+ mutex_unlock(&priv->lock);
+
+ return ret;
+}
+
+static int mt6370_isnk_pattern_set(struct led_classdev *lcdev,
+ struct led_pattern *pattern, u32 len,
+ int repeat)
+{
+ struct mt6370_led *led = container_of(lcdev, struct mt6370_led, isink);
+ struct mt6370_priv *priv = led->priv;
+ unsigned int reg_base;
+ u8 params[P_MAX_PATTERNS / 2];
+ int ret;
+
+ mutex_lock(&priv->lock);
+
+ ret = mt6370_gen_breath_pattern(priv, pattern, len, params,
+ sizeof(params));
+ if (ret)
+ goto out;
+
+ mt6370_get_breath_reg_base(priv, led->index, ®_base);
+
+ ret = regmap_raw_write(priv->regmap, reg_base, params, sizeof(params));
+ if (ret)
+ goto out;
+
+ ret = mt6370_set_led_mode(priv, led->index, MT6370_LED_BREATH_MODE);
+
+out:
+ mutex_unlock(&priv->lock);
+
+ return ret;
+}
+
+static inline int mt6370_isnk_pattern_clear(struct led_classdev *lcdev)
+{
+ struct mt6370_led *led = container_of(lcdev, struct mt6370_led, isink);
+ struct mt6370_priv *priv = led->priv;
+ int ret;
+
+ mutex_lock(&led->priv->lock);
+ ret = mt6370_set_led_mode(priv, led->index, MT6370_LED_REG_MODE);
+ mutex_unlock(&led->priv->lock);
+
+ return ret;
+}
+
+static int mt6370_init_led_properties(struct mt6370_led *led,
+ struct led_init_data *init_data)
+{
+ struct mt6370_priv *priv = led->priv;
+ struct led_classdev *lcdev;
+ struct fwnode_handle *child;
+ enum mt6370_led_ranges sel_range;
+ u32 max_uA, max_level;
+ const char * const states[] = { "off", "keep", "on" };
+ const char *stat_str;
+ int ret;
+
+ if (led->index == MT6370_VIRTUAL_MULTICOLOR) {
+ struct mc_subled *sub_led;
+ u32 num_color = 0;
+
+ sub_led = devm_kzalloc(priv->dev,
+ sizeof(*sub_led) * MC_CHANNEL_NUM,
+ GFP_KERNEL);
+ if (!sub_led)
+ return -ENOMEM;
+
+ fwnode_for_each_child_node(init_data->fwnode, child) {
+ u32 reg, color;
+
+ ret = fwnode_property_read_u32(child, "reg", ®);
+ if (ret || reg > MT6370_LED_ISNK3 ||
+ priv->leds_active & BIT(reg))
+ return -EINVAL;
+
+ ret = fwnode_property_read_u32(child, "color", &color);
+ if (ret) {
+ dev_err(priv->dev,
+ "led %d, no color specified\n",
+ led->index);
+ return ret;
+ }
+
+ priv->leds_active |= BIT(reg);
+ sub_led[num_color].color_index = color;
+ sub_led[num_color].channel = reg;
+ num_color++;
+ }
+
+ if (num_color < 2) {
+ dev_err(priv->dev,
+ "Multicolor must include 2 or more led channel\n");
+ return -EINVAL;
+ }
+
+ led->mc.num_colors = num_color;
+ led->mc.subled_info = sub_led;
+
+ lcdev = &led->mc.led_cdev;
+ lcdev->brightness_set_blocking = mt6370_mc_brightness_set;
+ lcdev->blink_set = mt6370_mc_blink_set;
+ lcdev->pattern_set = mt6370_mc_pattern_set;
+ lcdev->pattern_clear = mt6370_mc_pattern_clear;
+ } else {
+ lcdev = &led->isink;
+ lcdev->brightness_set_blocking = mt6370_isnk_brightness_set;
+ lcdev->blink_set = mt6370_isnk_blink_set;
+ lcdev->pattern_set = mt6370_isnk_pattern_set;
+ lcdev->pattern_clear = mt6370_isnk_pattern_clear;
+ }
+
+ ret = fwnode_property_read_u32(init_data->fwnode, "led-max-microamp",
+ &max_uA);
+ if (ret) {
+ dev_warn(priv->dev,
+ "Not specified led-max-microamp, config to the minimum\n");
+ max_uA = 0;
+ }
+
+ if (led->index == MT6370_LED_ISNK4)
+ sel_range = R_LED4_CURR;
+ else
+ sel_range = R_LED123_CURR;
+
+ linear_range_get_selector_within(priv->ranges + sel_range, max_uA,
+ &max_level);
+
+ lcdev->max_brightness = max_level;
+
+ fwnode_property_read_string(init_data->fwnode, "linux,default-trigger",
+ &lcdev->default_trigger);
+
+ if (!fwnode_property_read_string(init_data->fwnode, "default-state",
+ &stat_str)) {
+ ret = match_string(states, ARRAY_SIZE(states), stat_str);
+ if (ret < 0)
+ ret = STATE_OFF;
+
+ led->default_state = ret;
+ }
+
+ return 0;
+}
+
+static int mt6370_isnk_init_default_state(struct mt6370_led *led)
+{
+ struct mt6370_priv *priv = led->priv;
+ unsigned int enable, level;
+ int ret;
+
+ ret = mt6370_get_led_brightness(priv, led->index, &level);
+ if (ret)
+ return ret;
+
+ ret = regmap_field_read(priv->fields[F_RGB_EN], &enable);
+ if (ret)
+ return ret;
+
+ if (!(enable & MT6370_CHEN_BIT(led->index)))
+ level = LED_OFF;
+
+ switch (led->default_state) {
+ case STATE_ON:
+ led->isink.brightness = led->isink.max_brightness;
+ break;
+ case STATE_KEEP:
+ led->isink.brightness = min(level, led->isink.max_brightness);
+ break;
+ default:
+ led->isink.brightness = LED_OFF;
+ }
+
+ return mt6370_isnk_brightness_set(&led->isink, led->isink.brightness);
+}
+
+static int mt6370_led_register(struct device *parent, struct mt6370_led *led,
+ struct led_init_data *init_data)
+{
+ struct mt6370_priv *priv = led->priv;
+ int ret;
+
+ if (led->index == MT6370_VIRTUAL_MULTICOLOR) {
+ ret = mt6370_mc_brightness_set(&led->mc.led_cdev, LED_OFF);
+ if (ret) {
+ dev_err(parent, "Couldn't set multicolor brightness\n");
+ return ret;
+ }
+
+ ret = devm_led_classdev_multicolor_register_ext(parent,
+ &led->mc,
+ init_data);
+ if (ret) {
+ dev_err(parent, "Couldn't register multicolor\n");
+ return ret;
+ }
+ } else {
+ if (led->index == MT6370_LED_ISNK4) {
+ ret = regmap_field_write(priv->fields[F_CHGIND_EN], 1);
+ if (ret) {
+ dev_err(parent, "Failed to set CHRIND to SW\n");
+ return ret;
+ }
+ }
+
+ ret = mt6370_isnk_init_default_state(led);
+ if (ret) {
+ dev_err(parent, "Failed to init %d isnk state\n",
+ led->index);
+ return ret;
+ }
+
+ ret = devm_led_classdev_register_ext(parent, &led->isink,
+ init_data);
+ if (ret) {
+ dev_err(parent, "Couldn't register isink %d\n",
+ led->index);
+ return ret;
+ }
+ }
+
+ return 0;
+}
+
+static int mt6370_check_vendor_info(struct mt6370_priv *priv)
+{
+ unsigned int devinfo, vid;
+ int ret;
+
+ ret = regmap_read(priv->regmap, MT6370_REG_DEV_INFO, &devinfo);
+ if (ret)
+ return ret;
+
+ vid = FIELD_GET(MT6370_VENID_MASK, devinfo);
+ if (vid == 0x9 || vid == 0xb) {
+ priv->reg_fields = mt6372_reg_fields;
+ priv->ranges = mt6372_led_ranges;
+ priv->is_mt6372 = true;
+ } else {
+ priv->reg_fields = common_reg_fields;
+ priv->ranges = common_led_ranges;
+ }
+
+ return 0;
+}
+
+static int mt6370_leds_probe(struct platform_device *pdev)
+{
+ struct mt6370_priv *priv;
+ struct fwnode_handle *child;
+ size_t count;
+ int i = 0, ret;
+
+ count = device_get_child_node_count(&pdev->dev);
+ if (!count || count > MT6370_MAX_LEDS) {
+ dev_err(&pdev->dev,
+ "No child node or node count over max led number %zu\n",
+ count);
+ return -EINVAL;
+ }
+
+ priv = devm_kzalloc(&pdev->dev,
+ struct_size(priv, leds, count), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ priv->leds_count = count;
+ priv->dev = &pdev->dev;
+ mutex_init(&priv->lock);
+
+ priv->regmap = dev_get_regmap(pdev->dev.parent, NULL);
+ if (!priv->regmap)
+ return dev_err_probe(&pdev->dev, -ENODEV,
+ "Failed to get parent regmap\n");
+
+ ret = mt6370_check_vendor_info(priv);
+ if (ret) {
+ dev_err(&pdev->dev, "Failed to check vendor info (%d)\n", ret);
+ return ret;
+ }
+
+ ret = devm_regmap_field_bulk_alloc(&pdev->dev, priv->regmap,
+ priv->fields, priv->reg_fields,
+ F_MAX_FIELDS);
+ if (ret)
+ return dev_err_probe(&pdev->dev, ret,
+ "Failed to allocate regmap field\n");
+
+ device_for_each_child_node(&pdev->dev, child) {
+ struct mt6370_led *led = priv->leds + i++;
+ struct led_init_data init_data = { .fwnode = child, };
+ u32 reg, color;
+
+ ret = fwnode_property_read_u32(child, "reg", ®);
+ if (ret)
+ return dev_err_probe(&pdev->dev, ret,
+ "Failed to parse reg property\n");
+
+ if (reg >= MT6370_MAX_LEDS)
+ return dev_err_probe(&pdev->dev, -EINVAL,
+ "Error reg property number\n");
+
+ ret = fwnode_property_read_u32(child, "color", &color);
+ if (ret) {
+ dev_err(&pdev->dev, "Failed to parse color property\n");
+ return ret;
+ }
+
+ if (color == LED_COLOR_ID_RGB || color == LED_COLOR_ID_MULTI)
+ reg = MT6370_VIRTUAL_MULTICOLOR;
+
+ if (priv->leds_active & BIT(reg))
+ return dev_err_probe(&pdev->dev, -EINVAL,
+ "Duplicat reg property\n");
+
+ priv->leds_active |= BIT(reg);
+
+ led->index = reg;
+ led->priv = priv;
+
+ ret = mt6370_init_led_properties(led, &init_data);
+ if (ret)
+ return ret;
+
+ ret = mt6370_led_register(&pdev->dev, led, &init_data);
+ if (ret)
+ return ret;
+ }
+
+ return 0;
+}
+
+static const struct of_device_id mt6370_rgbled_device_table[] = {
+ { .compatible = "mediatek,mt6370-indicator", },
+ {}
+};
+MODULE_DEVICE_TABLE(of, mt6370_rgbled_device_table);
+
+static struct platform_driver mt6370_rgbled_driver = {
+ .driver = {
+ .name = "mt6370-indicator",
+ .of_match_table = mt6370_rgbled_device_table,
+ },
+ .probe = mt6370_leds_probe,
+};
+module_platform_driver(mt6370_rgbled_driver);
+
+MODULE_AUTHOR("Alice Chen <[email protected]>");
+MODULE_DESCRIPTION("Mediatek MT6370 RGB Led Driver");
+MODULE_LICENSE("GPL v2");
--
2.7.4
From: ChiYuan Huang <[email protected]>
Add mt6370 backlight binding documentation.
Signed-off-by: ChiYuan Huang <[email protected]>
---
v3
- Rename "mediatek,bled-pwm-hys-input-threshold-steps" to
"mediatek,bled-pwm-hys-input-th-steps"
- Refine "bled-pwm-hys-input-th-steps", "bled-ovp-microvolt",
"bled-ocp-microamp" enum values
---
.../leds/backlight/mediatek,mt6370-backlight.yaml | 92 ++++++++++++++++++++++
1 file changed, 92 insertions(+)
create mode 100644 Documentation/devicetree/bindings/leds/backlight/mediatek,mt6370-backlight.yaml
diff --git a/Documentation/devicetree/bindings/leds/backlight/mediatek,mt6370-backlight.yaml b/Documentation/devicetree/bindings/leds/backlight/mediatek,mt6370-backlight.yaml
new file mode 100644
index 0000000..26563ae
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/backlight/mediatek,mt6370-backlight.yaml
@@ -0,0 +1,92 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/backlight/mediatek,mt6370-backlight.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek MT6370 Backlight
+
+maintainers:
+ - ChiaEn Wu <[email protected]>
+
+description: |
+ This module is part of the MT6370 MFD device.
+ The MT6370 Backlight WLED driver supports up to a 29V output voltage for
+ 4 channels of 8 series WLEDs. Each channel supports up to 30mA of current
+ capability with 2048 current steps (11 bits) in exponential or linear
+ mapping curves.
+
+allOf:
+ - $ref: common.yaml#
+
+properties:
+ compatible:
+ const: mediatek,mt6370-backlight
+
+ default-brightness:
+ minimum: 0
+ maximum: 2048
+
+ max-brightness:
+ minimum: 0
+ maximum: 2048
+
+ enable-gpios:
+ description: External backlight 'enable' pin
+ maxItems: 1
+
+ mediatek,bled-pwm-enable:
+ description: |
+ Enable external PWM input for backlight dimming
+ type: boolean
+
+ mediatek,bled-pwm-hys-enable:
+ description: |
+ Enable the backlight input-hysteresis for PWM mode
+ type: boolean
+
+ mediatek,bled-pwm-hys-input-th-steps:
+ $ref: /schemas/types.yaml#/definitions/uint8
+ enum: [1, 4, 16, 64]
+ description: |
+ The selection of the upper and lower bounds threshold of backlight
+ PWM resolution. If we choose selection 64, the variation of PWM
+ resolution needs over than 64 steps.
+
+ mediatek,bled-ovp-shutdown:
+ description: |
+ Enable the backlight shutdown when OVP level triggered
+ type: boolean
+
+ mediatek,bled-ovp-microvolt:
+ enum: [17000000, 21000000, 25000000, 29000000]
+ description: |
+ Backlight OVP level selection.
+
+ mediatek,bled-ocp-shutdown:
+ description: |
+ Enable the backlight shutdown when OCP level triggerred.
+ type: boolean
+
+ mediatek,bled-ocp-microamp:
+ enum: [900000, 1200000, 1500000, 1800000]
+ description: |
+ Backlight OC level selection.
+
+ mediatek,bled-channel-use:
+ $ref: /schemas/types.yaml#/definitions/uint8
+ description: |
+ Backlight LED channel to be used.
+ Each bit mapping to:
+ - 0: CH4
+ - 1: CH3
+ - 2: CH2
+ - 3: CH1
+ minimum: 1
+ maximum: 15
+
+required:
+ - compatible
+ - mediatek,bled-channel-use
+
+additionalProperties: false
--
2.7.4
From: ChiYuan Huang <[email protected]>
Add Mediatek MT6370 binding documentation.
Signed-off-by: ChiYuan Huang <[email protected]>
---
v3
- Use " in entire patchset
- Refine ADC description
- Rename "enable-gpio" to "enable-gpios" in "regualtor"
- Change "/schemas/" to "../" in every reference of all MT6370 modules
---
.../devicetree/bindings/mfd/mediatek,mt6370.yaml | 280 +++++++++++++++++++++
include/dt-bindings/iio/adc/mediatek,mt6370_adc.h | 18 ++
2 files changed, 298 insertions(+)
create mode 100644 Documentation/devicetree/bindings/mfd/mediatek,mt6370.yaml
create mode 100644 include/dt-bindings/iio/adc/mediatek,mt6370_adc.h
diff --git a/Documentation/devicetree/bindings/mfd/mediatek,mt6370.yaml b/Documentation/devicetree/bindings/mfd/mediatek,mt6370.yaml
new file mode 100644
index 0000000..fa9da13
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/mediatek,mt6370.yaml
@@ -0,0 +1,280 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/mediatek,mt6370.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek MT6370 SubPMIC
+
+maintainers:
+ - ChiYuan Huang <[email protected]>
+
+description: |
+ MT6370 is a highly-integrated smart power management IC, which includes a
+ single cell Li-Ion/Li-Polymer switching battery charger, a USB Type-C &
+ Power Delivery (PD) controller, dual flash LED current sources, a RGB LED
+ driver, a backlight WLED driver, a display bias driver and a general LDO for
+ portable devices.
+
+properties:
+ compatible:
+ const: mediatek,mt6370
+
+ reg:
+ maxItems: 1
+
+ wakeup-source: true
+
+ interrupts:
+ maxItems: 1
+
+ interrupt-controller: true
+
+ "#interrupt-cells":
+ const: 1
+
+ adc:
+ type: object
+ description: |
+ Provides 9 channels for system monitoring, including VBUSDIV5 (lower
+ accuracy, higher measure range), VBUSDIV2 (higher accuracy, lower
+ measure range), VBAT, VSYS, CHG_VDDP, TS_BAT, IBUS, IBAT, and TEMP_JC.
+
+ properties:
+ compatible:
+ const: mediatek,mt6370-adc
+
+ "#io-channel-cells":
+ const: 1
+
+ required:
+ - compatible
+ - "#io-channel-cells"
+
+ backlight:
+ type: object
+ $ref: ../leds/backlight/mediatek,mt6370-backlight.yaml#
+
+ charger:
+ type: object
+ $ref: ../power/supply/mediatek,mt6370-charger.yaml#
+
+ tcpc:
+ type: object
+ $ref: ../usb/mediatek,mt6370-tcpc.yaml#
+
+ indicator:
+ type: object
+ $ref: ../leds/mediatek,mt6370-indicator.yaml#
+
+ flashlight:
+ type: object
+ $ref: ../leds/mediatek,mt6370-flashlight.yaml#
+
+ regulators:
+ type: object
+ description: |
+ List all supported regulators, which support the control for DisplayBias
+ voltages and one general purpose LDO which commonly used to drive the
+ vibrator.
+
+ patternProperties:
+ "^(dsvbst|vibldo)$":
+ $ref: /schemas/regulator/regulator.yaml#
+ type: object
+ unevaluatedProperties: false
+
+ "^(dsvpos|dsvneg)$":
+ $ref: /schemas/regulator/regulator.yaml#
+ type: object
+ unevaluatedProperties: false
+
+ properties:
+ enable-gpios:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - interrupt-controller
+ - "#interrupt-cells"
+ - regulators
+ - adc
+ - backlight
+ - indicator
+ - tcpc
+ - charger
+ - flashlight
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+ #include <dt-bindings/leds/common.h>
+ #include <dt-bindings/iio/adc/mediatek,mt6370_adc.h>
+ #include <dt-bindings/usb/pd.h>
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pmic@34 {
+ compatible = "mediatek,mt6370";
+ reg = <0x34>;
+ wakeup-source;
+ interrupts-extended = <&gpio26 3 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ mt6370_adc: adc {
+ compatible = "mediatek,mt6370-adc";
+ #io-channel-cells = <1>;
+ };
+
+ backlight {
+ compatible = "mediatek,mt6370-backlight";
+ mediatek,bled-channel-use = /bits/ 8 <15>;
+ };
+
+ charger {
+ compatible = "mediatek,mt6370-charger";
+ interrupts = <48>, <68>, <6>;
+ interrupt-names = "attach_i", "uvp_d_evt", "mivr";
+ io-channels = <&mt6370_adc MT6370_CHAN_IBUS>;
+
+ mt6370_otg_vbus: usb-otg-vbus-regulator {
+ regulator-name = "mt6370-usb-otg-vbus";
+ regulator-min-microvolt = <4350000>;
+ regulator-max-microvolt = <5800000>;
+ regulator-min-microamp = <500000>;
+ regulator-max-microamp = <3000000>;
+ };
+ };
+
+ indicator {
+ compatible = "mediatek,mt6370-indicator";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ multi-led@0 {
+ reg = <0>;
+ function = LED_FUNCTION_INDICATOR;
+ color = <LED_COLOR_ID_RGB>;
+ led-max-microamp = <24000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ led@0 {
+ reg = <0>;
+ color = <LED_COLOR_ID_RED>;
+ };
+ led@1 {
+ reg = <1>;
+ color = <LED_COLOR_ID_GREEN>;
+ };
+ led@2 {
+ reg = <2>;
+ color = <LED_COLOR_ID_BLUE>;
+ };
+ };
+ led@3 {
+ reg = <3>;
+ function = LED_FUNCTION_INDICATOR;
+ color = <LED_COLOR_ID_WHITE>;
+ led-max-microamp = <6000>;
+ };
+ };
+
+ flashlight {
+ compatible = "mediatek,mt6370-flashlight";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ led@0 {
+ reg = <0>;
+ led-sources = <0>;
+ function = LED_FUNCTION_FLASH;
+ color = <LED_COLOR_ID_WHITE>;
+ function-enumerator = <1>;
+ led-max-microamp = <200000>;
+ flash-max-microamp = <500000>;
+ flash-max-timeout-us = <1248000>;
+ };
+ led@1 {
+ reg = <1>;
+ led-sources = <1>;
+ function = LED_FUNCTION_FLASH;
+ color = <LED_COLOR_ID_WHITE>;
+ function-enumerator = <2>;
+ led-max-microamp = <200000>;
+ flash-max-microamp = <500000>;
+ flash-max-timeout-us = <1248000>;
+ };
+ };
+
+ tcpc {
+ compatible = "mediatek,mt6370-tcpc";
+ interrupts-extended = <&gpio26 4 IRQ_TYPE_LEVEL_LOW>;
+
+ connector {
+ compatible = "usb-c-connector";
+ label = "USB-C";
+ vbus-supply = <&mt6370_otg_vbus>;
+ data-role = "dual";
+ power-role = "dual";
+ try-power-role = "sink";
+ source-pdos = <PDO_FIXED(5000, 1000, PDO_FIXED_DUAL_ROLE | PDO_FIXED_DATA_SWAP)>;
+ sink-pdos = <PDO_FIXED(5000, 2000, PDO_FIXED_DUAL_ROLE | PDO_FIXED_DATA_SWAP)>;
+ op-sink-microwatt = <10000000>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ endpoint {
+ remote-endpoint = <&usb_hs>;
+ };
+ };
+ port@1 {
+ reg = <1>;
+ endpoint {
+ remote-endpoint = <&usb_ss>;
+ };
+ };
+ port@2 {
+ reg = <2>;
+ endpoint {
+ remote-endpoint = <&dp_aux>;
+ };
+ };
+ };
+ };
+ };
+
+ regulators {
+ dsvbst {
+ regulator-name = "mt6370-dsv-vbst";
+ regulator-min-microvolt = <4000000>;
+ regulator-max-microvolt = <6200000>;
+ };
+ dsvpos {
+ regulator-name = "mt6370-dsv-vpos";
+ regulator-min-microvolt = <4000000>;
+ regulator-max-microvolt = <6000000>;
+ regulator-boot-on;
+ };
+ dsvneg {
+ regulator-name = "mt6370-dsv-vneg";
+ regulator-min-microvolt = <4000000>;
+ regulator-max-microvolt = <6000000>;
+ regulator-boot-on;
+ };
+ vibldo {
+ regulator-name = "mt6370-vib-ldo";
+ regulator-min-microvolt = <1600000>;
+ regulator-max-microvolt = <4000000>;
+ };
+ };
+ };
+ };
diff --git a/include/dt-bindings/iio/adc/mediatek,mt6370_adc.h b/include/dt-bindings/iio/adc/mediatek,mt6370_adc.h
new file mode 100644
index 0000000..6ee7255
--- /dev/null
+++ b/include/dt-bindings/iio/adc/mediatek,mt6370_adc.h
@@ -0,0 +1,18 @@
+/* SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause */
+
+#ifndef __DT_BINDINGS_MEDIATEK_MT6370_ADC_H__
+#define __DT_BINDINGS_MEDIATEK_MT6370_ADC_H__
+
+/* ADC Channel Index */
+#define MT6370_CHAN_VBUSDIV5 0
+#define MT6370_CHAN_VBUSDIV2 1
+#define MT6370_CHAN_VSYS 2
+#define MT6370_CHAN_VBAT 3
+#define MT6370_CHAN_TS_BAT 4
+#define MT6370_CHAN_IBUS 5
+#define MT6370_CHAN_IBAT 6
+#define MT6370_CHAN_CHG_VDDP 7
+#define MT6370_CHAN_TEMP_JC 8
+#define MT6370_CHAN_MAX 9
+
+#endif
--
2.7.4
From: ChiYuan Huang <[email protected]>
Add Mediatek MT6370 MFD support.
Signed-off-by: ChiYuan Huang <[email protected]>
---
v3
- Refine Kconfig help text
- Refine error message of unknown vendor ID in
mt6370_check_vendor_info()
- Refine return value handling of mt6370_regmap_read()
- Refine all probe error by using dev_err_probe()
- Refine "bank_idx" and "bank_addr" in mt6370_regmap_read() and
mt6370_regmap_write()
- Add "#define VENID*" and drop the comments in
mt6370_check_vendor_info()
- Drop "MFD" in MODULE_DESCRIPTION()
---
drivers/mfd/Kconfig | 13 ++
drivers/mfd/Makefile | 1 +
drivers/mfd/mt6370.c | 358 +++++++++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 372 insertions(+)
create mode 100644 drivers/mfd/mt6370.c
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 3b59456..4c900c4 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -937,6 +937,19 @@ config MFD_MT6360
PMIC part includes 2-channel BUCKs and 2-channel LDOs
LDO part includes 4-channel LDOs
+config MFD_MT6370
+ tristate "Mediatek MT6370 SubPMIC"
+ select MFD_CORE
+ select REGMAP_I2C
+ select REGMAP_IRQ
+ depends on I2C
+ help
+ Say Y here to enable MT6370 SubPMIC functional support.
+ It consists of a single cell battery charger with ADC monitoring, RGB
+ LEDs, dual channel flashlight, WLED backlight driver, display bias
+ voltage supply, one general purpose LDO, and the USB Type-C & PD
+ controller complies with the latest USB Type-C and PD standards.
+
config MFD_MT6397
tristate "MediaTek MT6397 PMIC Support"
select MFD_CORE
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index 858cacf..62b2712 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -242,6 +242,7 @@ obj-$(CONFIG_INTEL_SOC_PMIC_BXTWC) += intel_soc_pmic_bxtwc.o
obj-$(CONFIG_INTEL_SOC_PMIC_CHTWC) += intel_soc_pmic_chtwc.o
obj-$(CONFIG_INTEL_SOC_PMIC_CHTDC_TI) += intel_soc_pmic_chtdc_ti.o
obj-$(CONFIG_MFD_MT6360) += mt6360-core.o
+obj-$(CONFIG_MFD_MT6370) += mt6370.o
mt6397-objs := mt6397-core.o mt6397-irq.o mt6358-irq.o
obj-$(CONFIG_MFD_MT6397) += mt6397.o
obj-$(CONFIG_INTEL_SOC_PMIC_MRFLD) += intel_soc_pmic_mrfld.o
diff --git a/drivers/mfd/mt6370.c b/drivers/mfd/mt6370.c
new file mode 100644
index 0000000..49f02b1
--- /dev/null
+++ b/drivers/mfd/mt6370.c
@@ -0,0 +1,358 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include <linux/bits.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/mfd/core.h>
+#include <linux/module.h>
+#include <linux/regmap.h>
+
+enum {
+ MT6370_USBC_I2C = 0,
+ MT6370_PMU_I2C,
+ MT6370_MAX_I2C
+};
+
+#define MT6370_REG_DEV_INFO 0x100
+#define MT6370_REG_CHG_IRQ1 0x1C0
+#define MT6370_REG_CHG_MASK1 0x1E0
+
+#define MT6370_VENID_MASK GENMASK(7, 4)
+
+#define MT6370_NUM_IRQREGS 16
+#define MT6370_USBC_I2CADDR 0x4E
+#define MT6370_REG_ADDRLEN 2
+#define MT6370_REG_MAXADDR 0x1FF
+
+#define MT6370_VENID_RT5081 0x8
+#define MT6370_VENID_RT5081A 0xA
+#define MT6370_VENID_MT6370 0xE
+#define MT6370_VENID_MT6371 0xF
+#define MT6370_VENID_MT6372P 0x9
+#define MT6370_VENID_MT6372CP 0xB
+
+/* IRQ definitions */
+#define MT6370_IRQ_DIRCHGON 0
+#define MT6370_IRQ_CHG_TREG 4
+#define MT6370_IRQ_CHG_AICR 5
+#define MT6370_IRQ_CHG_MIVR 6
+#define MT6370_IRQ_PWR_RDY 7
+#define MT6370_IRQ_FL_CHG_VINOVP 11
+#define MT6370_IRQ_CHG_VSYSUV 12
+#define MT6370_IRQ_CHG_VSYSOV 13
+#define MT6370_IRQ_CHG_VBATOV 14
+#define MT6370_IRQ_CHG_VINOVPCHG 15
+#define MT6370_IRQ_TS_BAT_COLD 20
+#define MT6370_IRQ_TS_BAT_COOL 21
+#define MT6370_IRQ_TS_BAT_WARM 22
+#define MT6370_IRQ_TS_BAT_HOT 23
+#define MT6370_IRQ_TS_STATC 24
+#define MT6370_IRQ_CHG_FAULT 25
+#define MT6370_IRQ_CHG_STATC 26
+#define MT6370_IRQ_CHG_TMR 27
+#define MT6370_IRQ_CHG_BATABS 28
+#define MT6370_IRQ_CHG_ADPBAD 29
+#define MT6370_IRQ_CHG_RVP 30
+#define MT6370_IRQ_TSHUTDOWN 31
+#define MT6370_IRQ_CHG_IINMEAS 32
+#define MT6370_IRQ_CHG_ICCMEAS 33
+#define MT6370_IRQ_CHGDET_DONE 34
+#define MT6370_IRQ_WDTMR 35
+#define MT6370_IRQ_SSFINISH 36
+#define MT6370_IRQ_CHG_RECHG 37
+#define MT6370_IRQ_CHG_TERM 38
+#define MT6370_IRQ_CHG_IEOC 39
+#define MT6370_IRQ_ADC_DONE 40
+#define MT6370_IRQ_PUMPX_DONE 41
+#define MT6370_IRQ_BST_BATUV 45
+#define MT6370_IRQ_BST_MIDOV 46
+#define MT6370_IRQ_BST_OLP 47
+#define MT6370_IRQ_ATTACH 48
+#define MT6370_IRQ_DETACH 49
+#define MT6370_IRQ_HVDCP_STPDONE 51
+#define MT6370_IRQ_HVDCP_VBUSDET_DONE 52
+#define MT6370_IRQ_HVDCP_DET 53
+#define MT6370_IRQ_CHGDET 54
+#define MT6370_IRQ_DCDT 55
+#define MT6370_IRQ_DIRCHG_VGOK 59
+#define MT6370_IRQ_DIRCHG_WDTMR 60
+#define MT6370_IRQ_DIRCHG_UC 61
+#define MT6370_IRQ_DIRCHG_OC 62
+#define MT6370_IRQ_DIRCHG_OV 63
+#define MT6370_IRQ_OVPCTRL_SWON 67
+#define MT6370_IRQ_OVPCTRL_UVP_D 68
+#define MT6370_IRQ_OVPCTRL_UVP 69
+#define MT6370_IRQ_OVPCTRL_OVP_D 70
+#define MT6370_IRQ_OVPCTRL_OVP 71
+#define MT6370_IRQ_FLED_STRBPIN 72
+#define MT6370_IRQ_FLED_TORPIN 73
+#define MT6370_IRQ_FLED_TX 74
+#define MT6370_IRQ_FLED_LVF 75
+#define MT6370_IRQ_FLED2_SHORT 78
+#define MT6370_IRQ_FLED1_SHORT 79
+#define MT6370_IRQ_FLED2_STRB 80
+#define MT6370_IRQ_FLED1_STRB 81
+#define mT6370_IRQ_FLED2_STRB_TO 82
+#define MT6370_IRQ_FLED1_STRB_TO 83
+#define MT6370_IRQ_FLED2_TOR 84
+#define MT6370_IRQ_FLED1_TOR 85
+#define MT6370_IRQ_OTP 93
+#define MT6370_IRQ_VDDA_OVP 94
+#define MT6370_IRQ_VDDA_UV 95
+#define MT6370_IRQ_LDO_OC 103
+#define MT6370_IRQ_BLED_OCP 118
+#define MT6370_IRQ_BLED_OVP 119
+#define MT6370_IRQ_DSV_VNEG_OCP 123
+#define MT6370_IRQ_DSV_VPOS_OCP 124
+#define MT6370_IRQ_DSV_BST_OCP 125
+#define MT6370_IRQ_DSV_VNEG_SCP 126
+#define MT6370_IRQ_DSV_VPOS_SCP 127
+
+struct mt6370_info {
+ struct i2c_client *i2c[MT6370_MAX_I2C];
+ struct device *dev;
+ struct regmap *regmap;
+ struct regmap_irq_chip_data *irq_data;
+};
+
+static const struct regmap_irq mt6370_irqs[] = {
+ REGMAP_IRQ_REG_LINE(MT6370_IRQ_DIRCHGON, 8),
+ REGMAP_IRQ_REG_LINE(MT6370_IRQ_CHG_TREG, 8),
+ REGMAP_IRQ_REG_LINE(MT6370_IRQ_CHG_AICR, 8),
+ REGMAP_IRQ_REG_LINE(MT6370_IRQ_CHG_MIVR, 8),
+ REGMAP_IRQ_REG_LINE(MT6370_IRQ_PWR_RDY, 8),
+ REGMAP_IRQ_REG_LINE(MT6370_IRQ_FL_CHG_VINOVP, 8),
+ REGMAP_IRQ_REG_LINE(MT6370_IRQ_CHG_VSYSUV, 8),
+ REGMAP_IRQ_REG_LINE(MT6370_IRQ_CHG_VSYSOV, 8),
+ REGMAP_IRQ_REG_LINE(MT6370_IRQ_CHG_VBATOV, 8),
+ REGMAP_IRQ_REG_LINE(MT6370_IRQ_CHG_VINOVPCHG, 8),
+ REGMAP_IRQ_REG_LINE(MT6370_IRQ_TS_BAT_COLD, 8),
+ REGMAP_IRQ_REG_LINE(MT6370_IRQ_TS_BAT_COOL, 8),
+ REGMAP_IRQ_REG_LINE(MT6370_IRQ_TS_BAT_WARM, 8),
+ REGMAP_IRQ_REG_LINE(MT6370_IRQ_TS_BAT_HOT, 8),
+ REGMAP_IRQ_REG_LINE(MT6370_IRQ_TS_STATC, 8),
+ REGMAP_IRQ_REG_LINE(MT6370_IRQ_CHG_FAULT, 8),
+ REGMAP_IRQ_REG_LINE(MT6370_IRQ_CHG_STATC, 8),
+ REGMAP_IRQ_REG_LINE(MT6370_IRQ_CHG_TMR, 8),
+ REGMAP_IRQ_REG_LINE(MT6370_IRQ_CHG_BATABS, 8),
+ REGMAP_IRQ_REG_LINE(MT6370_IRQ_CHG_ADPBAD, 8),
+ REGMAP_IRQ_REG_LINE(MT6370_IRQ_CHG_RVP, 8),
+ REGMAP_IRQ_REG_LINE(MT6370_IRQ_TSHUTDOWN, 8),
+ REGMAP_IRQ_REG_LINE(MT6370_IRQ_CHG_IINMEAS, 8),
+ REGMAP_IRQ_REG_LINE(MT6370_IRQ_CHG_ICCMEAS, 8),
+ REGMAP_IRQ_REG_LINE(MT6370_IRQ_CHGDET_DONE, 8),
+ REGMAP_IRQ_REG_LINE(MT6370_IRQ_WDTMR, 8),
+ REGMAP_IRQ_REG_LINE(MT6370_IRQ_SSFINISH, 8),
+ REGMAP_IRQ_REG_LINE(MT6370_IRQ_CHG_RECHG, 8),
+ REGMAP_IRQ_REG_LINE(MT6370_IRQ_CHG_TERM, 8),
+ REGMAP_IRQ_REG_LINE(MT6370_IRQ_CHG_IEOC, 8),
+ REGMAP_IRQ_REG_LINE(MT6370_IRQ_ADC_DONE, 8),
+ REGMAP_IRQ_REG_LINE(MT6370_IRQ_PUMPX_DONE, 8),
+ REGMAP_IRQ_REG_LINE(MT6370_IRQ_BST_BATUV, 8),
+ REGMAP_IRQ_REG_LINE(MT6370_IRQ_BST_MIDOV, 8),
+ REGMAP_IRQ_REG_LINE(MT6370_IRQ_BST_OLP, 8),
+ REGMAP_IRQ_REG_LINE(MT6370_IRQ_ATTACH, 8),
+ REGMAP_IRQ_REG_LINE(MT6370_IRQ_DETACH, 8),
+ REGMAP_IRQ_REG_LINE(MT6370_IRQ_HVDCP_STPDONE, 8),
+ REGMAP_IRQ_REG_LINE(MT6370_IRQ_HVDCP_VBUSDET_DONE, 8),
+ REGMAP_IRQ_REG_LINE(MT6370_IRQ_HVDCP_DET, 8),
+ REGMAP_IRQ_REG_LINE(MT6370_IRQ_CHGDET, 8),
+ REGMAP_IRQ_REG_LINE(MT6370_IRQ_DCDT, 8),
+ REGMAP_IRQ_REG_LINE(MT6370_IRQ_DIRCHG_VGOK, 8),
+ REGMAP_IRQ_REG_LINE(MT6370_IRQ_DIRCHG_WDTMR, 8),
+ REGMAP_IRQ_REG_LINE(MT6370_IRQ_DIRCHG_UC, 8),
+ REGMAP_IRQ_REG_LINE(MT6370_IRQ_DIRCHG_OC, 8),
+ REGMAP_IRQ_REG_LINE(MT6370_IRQ_DIRCHG_OV, 8),
+ REGMAP_IRQ_REG_LINE(MT6370_IRQ_OVPCTRL_SWON, 8),
+ REGMAP_IRQ_REG_LINE(MT6370_IRQ_OVPCTRL_UVP_D, 8),
+ REGMAP_IRQ_REG_LINE(MT6370_IRQ_OVPCTRL_UVP, 8),
+ REGMAP_IRQ_REG_LINE(MT6370_IRQ_OVPCTRL_OVP_D, 8),
+ REGMAP_IRQ_REG_LINE(MT6370_IRQ_OVPCTRL_OVP, 8),
+ REGMAP_IRQ_REG_LINE(MT6370_IRQ_FLED_STRBPIN, 8),
+ REGMAP_IRQ_REG_LINE(MT6370_IRQ_FLED_TORPIN, 8),
+ REGMAP_IRQ_REG_LINE(MT6370_IRQ_FLED_TX, 8),
+ REGMAP_IRQ_REG_LINE(MT6370_IRQ_FLED_LVF, 8),
+ REGMAP_IRQ_REG_LINE(MT6370_IRQ_FLED2_SHORT, 8),
+ REGMAP_IRQ_REG_LINE(MT6370_IRQ_FLED1_SHORT, 8),
+ REGMAP_IRQ_REG_LINE(MT6370_IRQ_FLED2_STRB, 8),
+ REGMAP_IRQ_REG_LINE(MT6370_IRQ_FLED1_STRB, 8),
+ REGMAP_IRQ_REG_LINE(mT6370_IRQ_FLED2_STRB_TO, 8),
+ REGMAP_IRQ_REG_LINE(MT6370_IRQ_FLED1_STRB_TO, 8),
+ REGMAP_IRQ_REG_LINE(MT6370_IRQ_FLED2_TOR, 8),
+ REGMAP_IRQ_REG_LINE(MT6370_IRQ_FLED1_TOR, 8),
+ REGMAP_IRQ_REG_LINE(MT6370_IRQ_OTP, 8),
+ REGMAP_IRQ_REG_LINE(MT6370_IRQ_VDDA_OVP, 8),
+ REGMAP_IRQ_REG_LINE(MT6370_IRQ_VDDA_UV, 8),
+ REGMAP_IRQ_REG_LINE(MT6370_IRQ_LDO_OC, 8),
+ REGMAP_IRQ_REG_LINE(MT6370_IRQ_BLED_OCP, 8),
+ REGMAP_IRQ_REG_LINE(MT6370_IRQ_BLED_OVP, 8),
+ REGMAP_IRQ_REG_LINE(MT6370_IRQ_DSV_VNEG_OCP, 8),
+ REGMAP_IRQ_REG_LINE(MT6370_IRQ_DSV_VPOS_OCP, 8),
+ REGMAP_IRQ_REG_LINE(MT6370_IRQ_DSV_BST_OCP, 8),
+ REGMAP_IRQ_REG_LINE(MT6370_IRQ_DSV_VNEG_SCP, 8),
+ REGMAP_IRQ_REG_LINE(MT6370_IRQ_DSV_VPOS_SCP, 8)
+};
+
+static const struct regmap_irq_chip mt6370_irq_chip = {
+ .name = "mt6370-irqs",
+ .status_base = MT6370_REG_CHG_IRQ1,
+ .mask_base = MT6370_REG_CHG_MASK1,
+ .num_regs = MT6370_NUM_IRQREGS,
+ .irqs = mt6370_irqs,
+ .num_irqs = ARRAY_SIZE(mt6370_irqs),
+};
+
+static const struct resource mt6370_regulator_irqs[] = {
+ DEFINE_RES_IRQ_NAMED(MT6370_IRQ_DSV_VPOS_SCP, "db_vpos_scp"),
+ DEFINE_RES_IRQ_NAMED(MT6370_IRQ_DSV_VNEG_SCP, "db_vneg_scp"),
+ DEFINE_RES_IRQ_NAMED(MT6370_IRQ_DSV_BST_OCP, "db_vbst_ocp"),
+ DEFINE_RES_IRQ_NAMED(MT6370_IRQ_DSV_VPOS_OCP, "db_vpos_ocp"),
+ DEFINE_RES_IRQ_NAMED(MT6370_IRQ_DSV_VNEG_OCP, "db_vneg_ocp"),
+ DEFINE_RES_IRQ_NAMED(MT6370_IRQ_LDO_OC, "ldo_oc")
+};
+
+static const struct mfd_cell mt6370_devices[] = {
+ MFD_CELL_OF("adc", NULL, NULL, 0, 0, "mediatek,mt6370-adc"),
+ MFD_CELL_OF("charger", NULL, NULL, 0, 0, "mediatek,mt6370-charger"),
+ MFD_CELL_OF("backlight", NULL, NULL, 0, 0, "mediatek,mt6370-backlight"),
+ MFD_CELL_OF("flashlight", NULL, NULL, 0, 0, "mediatek,mt6370-flashlight"),
+ MFD_CELL_OF("indicator", NULL, NULL, 0, 0, "mediatek,mt6370-indicator"),
+ MFD_CELL_OF("tcpc", NULL, NULL, 0, 0, "mediatek,mt6370-tcpc"),
+ MFD_CELL_RES("regulator", mt6370_regulator_irqs)
+};
+
+static int mt6370_check_vendor_info(struct mt6370_info *info)
+{
+ unsigned int devinfo;
+ int ret;
+
+ ret = regmap_read(info->regmap, MT6370_REG_DEV_INFO, &devinfo);
+ if (ret)
+ return ret;
+
+ switch (FIELD_GET(MT6370_VENID_MASK, devinfo)) {
+ case MT6370_VENID_RT5081:
+ case MT6370_VENID_RT5081A:
+ case MT6370_VENID_MT6370:
+ case MT6370_VENID_MT6371:
+ case MT6370_VENID_MT6372P:
+ case MT6370_VENID_MT6372CP:
+ break;
+ default:
+ dev_err(info->dev, "Unknown Vendor ID 0x%02x\n", devinfo);
+ return -ENODEV;
+ }
+
+ return 0;
+}
+
+static int mt6370_regmap_read(void *context, const void *reg_buf,
+ size_t reg_size, void *val_buf, size_t val_size)
+{
+ struct mt6370_info *info = context;
+ u8 bank_idx, bank_addr;
+ int ret;
+
+ bank_idx = *(u8 *)reg_buf;
+ bank_addr = *(u8 *)(reg_buf + 1);
+
+ ret = i2c_smbus_read_i2c_block_data(info->i2c[bank_idx], bank_addr,
+ val_size, val_buf);
+ if (ret < 0)
+ return ret;
+ else if (ret != val_size)
+ return -EIO;
+
+ return 0;
+}
+
+static int mt6370_regmap_write(void *context, const void *data, size_t count)
+{
+ struct mt6370_info *info = context;
+ u8 bank_idx, bank_addr;
+ int len = count - MT6370_REG_ADDRLEN;
+
+ bank_idx = *(u8 *)data;
+ bank_addr = *(u8 *)(data + 1);
+
+ return i2c_smbus_write_i2c_block_data(info->i2c[bank_idx], bank_addr,
+ len, data + MT6370_REG_ADDRLEN);
+}
+
+static const struct regmap_bus mt6370_regmap_bus = {
+ .read = mt6370_regmap_read,
+ .write = mt6370_regmap_write,
+};
+
+static const struct regmap_config mt6370_regmap_config = {
+ .reg_bits = 16,
+ .val_bits = 8,
+ .reg_format_endian = REGMAP_ENDIAN_BIG,
+ .max_register = MT6370_REG_MAXADDR,
+};
+
+static int mt6370_probe(struct i2c_client *i2c)
+{
+ struct mt6370_info *info;
+ struct i2c_client *usbc_i2c;
+ int ret;
+
+ info = devm_kzalloc(&i2c->dev, sizeof(*info), GFP_KERNEL);
+ if (!info)
+ return -ENOMEM;
+
+ info->dev = &i2c->dev;
+
+ usbc_i2c = devm_i2c_new_dummy_device(&i2c->dev, i2c->adapter,
+ MT6370_USBC_I2CADDR);
+ if (IS_ERR(usbc_i2c))
+ return dev_err_probe(&i2c->dev, PTR_ERR(usbc_i2c),
+ "Failed to register USBC I2C client\n");
+
+ /* Assign I2C client for PMU and TypeC */
+ info->i2c[MT6370_PMU_I2C] = i2c;
+ info->i2c[MT6370_USBC_I2C] = usbc_i2c;
+
+ info->regmap = devm_regmap_init(&i2c->dev, &mt6370_regmap_bus, info,
+ &mt6370_regmap_config);
+ if (IS_ERR(info->regmap))
+ return dev_err_probe(&i2c->dev, PTR_ERR(info->regmap),
+ "Failed to register regmap\n");
+
+ ret = mt6370_check_vendor_info(info);
+ if (ret)
+ return dev_err_probe(&i2c->dev, ret,
+ "Failed to check vendor info\n");
+
+ ret = devm_regmap_add_irq_chip(&i2c->dev, info->regmap, i2c->irq,
+ IRQF_ONESHOT, -1, &mt6370_irq_chip,
+ &info->irq_data);
+ if (ret)
+ return dev_err_probe(&i2c->dev, ret,
+ "Failed to add irq chip\n");
+
+ return devm_mfd_add_devices(&i2c->dev, PLATFORM_DEVID_AUTO,
+ mt6370_devices, ARRAY_SIZE(mt6370_devices),
+ NULL, 0,
+ regmap_irq_get_domain(info->irq_data));
+}
+
+static const struct of_device_id mt6370_match_table[] = {
+ { .compatible = "mediatek,mt6370", },
+ {}
+};
+MODULE_DEVICE_TABLE(of, mt6370_match_table);
+
+static struct i2c_driver mt6370_driver = {
+ .driver = {
+ .name = "mt6370",
+ .of_match_table = mt6370_match_table,
+ },
+ .probe_new = mt6370_probe,
+};
+module_i2c_driver(mt6370_driver);
+
+MODULE_AUTHOR("ChiYuan Huang <[email protected]>");
+MODULE_DESCRIPTION("MT6370 I2C Driver");
+MODULE_LICENSE("GPL v2");
--
2.7.4
From: ChiaEn Wu <[email protected]>
Add Mediatek MT6370 Backlight support.
Signed-off-by: ChiaEn Wu <[email protected]>
---
v3
- Refine bool properties parsing (pwm-enable, ovp-shutdown, ocp-shutdown) in DT
parsing function
- Refine u32 and u8 properties parsing (pwm-hys-input-th-steps, ovp-microvolt,
ocp-microamp), from using register value to using actual value
- Refine error string of "channle-use" parsing failed
- Refine Kconfig help text
---
drivers/video/backlight/Kconfig | 9 +
drivers/video/backlight/Makefile | 1 +
drivers/video/backlight/mt6370-backlight.c | 346 +++++++++++++++++++++++++++++
3 files changed, 356 insertions(+)
create mode 100644 drivers/video/backlight/mt6370-backlight.c
diff --git a/drivers/video/backlight/Kconfig b/drivers/video/backlight/Kconfig
index a003e02..7cd823d 100644
--- a/drivers/video/backlight/Kconfig
+++ b/drivers/video/backlight/Kconfig
@@ -268,6 +268,15 @@ config BACKLIGHT_MAX8925
If you have a LCD backlight connected to the WLED output of MAX8925
WLED output, say Y here to enable this driver.
+config BACKLIGHT_MT6370
+ tristate "Mediatek MT6370 Backlight Driver"
+ depends on MFD_MT6370
+ help
+ This enables support for Mediatek MT6370 Backlight driver.
+ It's commonly used to drive the display WLED. There are 4 channels
+ inside, and each channel supports up to 30mA of current capability
+ with 2048 current steps in exponential or linear mapping curves.
+
config BACKLIGHT_APPLE
tristate "Apple Backlight Driver"
depends on X86 && ACPI
diff --git a/drivers/video/backlight/Makefile b/drivers/video/backlight/Makefile
index cae2c83..e815f3f 100644
--- a/drivers/video/backlight/Makefile
+++ b/drivers/video/backlight/Makefile
@@ -44,6 +44,7 @@ obj-$(CONFIG_BACKLIGHT_LP855X) += lp855x_bl.o
obj-$(CONFIG_BACKLIGHT_LP8788) += lp8788_bl.o
obj-$(CONFIG_BACKLIGHT_LV5207LP) += lv5207lp.o
obj-$(CONFIG_BACKLIGHT_MAX8925) += max8925_bl.o
+obj-$(CONFIG_BACKLIGHT_MT6370) += mt6370-backlight.o
obj-$(CONFIG_BACKLIGHT_OMAP1) += omap1_bl.o
obj-$(CONFIG_BACKLIGHT_PANDORA) += pandora_bl.o
obj-$(CONFIG_BACKLIGHT_PCF50633) += pcf50633-backlight.o
diff --git a/drivers/video/backlight/mt6370-backlight.c b/drivers/video/backlight/mt6370-backlight.c
new file mode 100644
index 0000000..c2ba09d
--- /dev/null
+++ b/drivers/video/backlight/mt6370-backlight.c
@@ -0,0 +1,346 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include <linux/backlight.h>
+#include <linux/bitfield.h>
+#include <linux/bits.h>
+#include <linux/gpio/consumer.h>
+#include <linux/gpio/driver.h>
+#include <linux/kernel.h>
+#include <linux/log2.h>
+#include <linux/minmax.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+
+#define MT6370_REG_DEV_INFO 0x100
+#define MT6370_REG_BL_EN 0x1A0
+#define MT6370_REG_BL_BSTCTRL 0x1A1
+#define MT6370_REG_BL_PWM 0x1A2
+#define MT6370_REG_BL_DIM2 0x1A4
+
+#define MT6370_VENID_MASK GENMASK(7, 4)
+#define MT6370_BL_EXT_EN_MASK BIT(7)
+#define MT6370_BL_EN_MASK BIT(6)
+#define MT6370_BL_CONFIG_MASK BIT(0)
+#define MT6370_BL_CH_MASK GENMASK(5, 2)
+#define MT6370_BL_DIM2_MASK GENMASK(2, 0)
+#define MT6370_BL_DUMMY_6372_MASK GENMASK(2, 0)
+#define MT6370_BL_DIM2_6372_SHIFT 3
+#define MT6370_BL_PWM_EN_MASK BIT(7)
+#define MT6370_BL_PWM_HYS_EN_MASK BIT(2)
+#define MT6370_BL_PWM_HYS_SEL_MASK GENMASK(1, 0)
+#define MT6370_BL_OVP_EN_MASK BIT(7)
+#define MT6370_BL_OVP_SEL_MASK GENMASK(6, 5)
+#define MT6370_BL_OC_EN_MASK BIT(3)
+#define MT6370_BL_OC_SEL_MASK GENMASK(2, 1)
+
+#define MT6370_BL_PWM_HYS_TH_MIN_STEP 1
+#define MT6370_BL_PWM_HYS_TH_MAX_STEP 64
+#define MT6370_BL_OVP_MIN_UV 17000000
+#define MT6370_BL_OVP_MAX_UV 29000000
+#define MT6370_BL_OVP_STEP_UV 4000000
+#define MT6370_BL_OCP_MIN_UA 900000
+#define MT6370_BL_OCP_MAX_UA 1800000
+#define MT6370_BL_OCP_STEP_UA 300000
+#define MT6370_BL_MAX_BRIGHTNESS 2048
+#define MT6370_BL_MAX_CH 15
+
+enum {
+ MT6370_VID_COMMON = 0,
+ MT6370_VID_6372,
+};
+
+struct mt6370_priv {
+ int vid_type;
+ struct backlight_device *bl;
+ struct device *dev;
+ struct gpio_desc *enable_gpio;
+ struct regmap *regmap;
+};
+
+static int mt6370_bl_update_status(struct backlight_device *bl_dev)
+{
+ struct mt6370_priv *priv = bl_get_data(bl_dev);
+ int brightness = backlight_get_brightness(bl_dev);
+ unsigned int enable_val;
+ u8 brightness_val[2];
+ int ret;
+
+ if (brightness) {
+ brightness_val[0] = (brightness - 1) & MT6370_BL_DIM2_MASK;
+ brightness_val[1] = (brightness - 1)
+ >> fls(MT6370_BL_DIM2_MASK);
+
+ /*
+ * To make MT6372 using 14 bits to control the brightness
+ * backward compatible with 11 bits brightness control
+ * (like MT6370 and MT6371 do), we left shift the value
+ * and pad with 1 to remaining bits. Hence, the MT6372's
+ * backlight brightness will be almost the same as MT6370's
+ * and MT6371's.
+ */
+ if (priv->vid_type == MT6370_VID_6372) {
+ brightness_val[0] <<= MT6370_BL_DIM2_6372_SHIFT;
+ brightness_val[0] |= MT6370_BL_DUMMY_6372_MASK;
+ }
+
+ ret = regmap_raw_write(priv->regmap, MT6370_REG_BL_DIM2,
+ brightness_val, sizeof(brightness_val));
+ if (ret)
+ return ret;
+ }
+
+ if (priv->enable_gpio)
+ gpiod_set_value(priv->enable_gpio, brightness ? 1 : 0);
+
+ enable_val = brightness ? MT6370_BL_EN_MASK : 0;
+ return regmap_update_bits(priv->regmap, MT6370_REG_BL_EN,
+ MT6370_BL_EN_MASK, enable_val);
+}
+
+static int mt6370_bl_get_brightness(struct backlight_device *bl_dev)
+{
+ struct mt6370_priv *priv = bl_get_data(bl_dev);
+ unsigned int enable;
+ u8 brightness_val[2];
+ int brightness, ret;
+
+ ret = regmap_read(priv->regmap, MT6370_REG_BL_EN, &enable);
+ if (ret)
+ return ret;
+
+ if (!(enable & MT6370_BL_EN_MASK))
+ return 0;
+
+ ret = regmap_raw_read(priv->regmap, MT6370_REG_BL_DIM2,
+ brightness_val, sizeof(brightness_val));
+ if (ret)
+ return ret;
+
+ if (priv->vid_type == MT6370_VID_6372)
+ brightness_val[0] >>= MT6370_BL_DIM2_6372_SHIFT;
+
+ brightness = brightness_val[1] << fls(MT6370_BL_DIM2_MASK);
+ brightness += (brightness_val[0] & MT6370_BL_DIM2_MASK);
+
+ return brightness + 1;
+}
+
+static const struct backlight_ops mt6370_bl_ops = {
+ .options = BL_CORE_SUSPENDRESUME,
+ .update_status = mt6370_bl_update_status,
+ .get_brightness = mt6370_bl_get_brightness,
+};
+
+static int mt6370_init_backlight_properties(struct mt6370_priv *priv,
+ struct backlight_properties *props)
+{
+ struct device *dev = priv->dev;
+ u8 prop_val;
+ u32 brightness, ovp_uV, ocp_uA;
+ unsigned int mask, val;
+ int ret;
+
+ /* Vendor optional properties */
+ val = 0;
+ if (device_property_read_bool(dev, "mediatek,bled-pwm-enable"))
+ val |= MT6370_BL_PWM_EN_MASK;
+
+ if (device_property_read_bool(dev, "mediatek,bled-pwm-hys-enable"))
+ val |= MT6370_BL_PWM_HYS_EN_MASK;
+
+ ret = device_property_read_u8(dev,
+ "mediatek,bled-pwm-hys-input-th-steps",
+ &prop_val);
+ if (!ret) {
+ prop_val = clamp_val(prop_val,
+ MT6370_BL_PWM_HYS_TH_MIN_STEP,
+ MT6370_BL_PWM_HYS_TH_MAX_STEP);
+ /*
+ * prop_val = 1 --> 1 steps --> 0x00
+ * prop_val = 2 ~ 4 --> 4 steps --> 0x01
+ * prop_val = 5 ~ 16 --> 16 steps --> 0x10
+ * prop_val = 17 ~ 64 --> 64 steps --> 0x11
+ */
+ prop_val = (ilog2(roundup_pow_of_two(prop_val)) + 1) >> 1;
+ val |= prop_val << (ffs(MT6370_BL_PWM_HYS_SEL_MASK) - 1);
+ }
+
+ ret = regmap_update_bits(priv->regmap, MT6370_REG_BL_PWM,
+ val, val);
+ if (ret)
+ return ret;
+
+ val = 0;
+ if (device_property_read_bool(dev, "mediatek,bled-ovp-shutdown"))
+ val |= MT6370_BL_OVP_EN_MASK;
+
+ ret = device_property_read_u32(dev, "mediatek,bled-ovp-microvolt",
+ &ovp_uV);
+ if (!ret) {
+ ovp_uV = clamp_val(ovp_uV, MT6370_BL_OVP_MIN_UV,
+ MT6370_BL_OVP_MAX_UV);
+ ovp_uV = DIV_ROUND_UP(ovp_uV - MT6370_BL_OVP_MIN_UV,
+ MT6370_BL_OVP_STEP_UV);
+ val |= ovp_uV << (ffs(MT6370_BL_OVP_SEL_MASK) - 1);
+ }
+
+ if (device_property_read_bool(dev, "mediatek,bled-ocp-shutdown"))
+ val |= MT6370_BL_OC_EN_MASK;
+
+ ret = device_property_read_u32(dev, "mediatek,bled-ocp-microamp",
+ &ocp_uA);
+ if (!ret) {
+ ocp_uA = clamp_val(ocp_uA, MT6370_BL_OCP_MIN_UA,
+ MT6370_BL_OCP_MAX_UA);
+ ocp_uA = DIV_ROUND_UP(ocp_uA - MT6370_BL_OCP_MIN_UA,
+ MT6370_BL_OCP_STEP_UA);
+ val |= ocp_uA << (ffs(MT6370_BL_OC_SEL_MASK) - 1);
+ }
+
+ ret = regmap_update_bits(priv->regmap, MT6370_REG_BL_BSTCTRL,
+ val, val);
+ if (ret)
+ return ret;
+
+ /* Common properties */
+ ret = device_property_read_u32(dev, "max-brightness", &brightness);
+ if (ret)
+ brightness = MT6370_BL_MAX_BRIGHTNESS;
+
+ props->max_brightness = min_t(u32, brightness,
+ MT6370_BL_MAX_BRIGHTNESS);
+
+ ret = device_property_read_u32(dev, "default-brightness", &brightness);
+ if (ret)
+ brightness = props->max_brightness;
+
+ props->brightness = min_t(u32, brightness, props->max_brightness);
+
+ val = 0;
+ prop_val = 0;
+ ret = device_property_read_u8(dev, "mediatek,bled-channel-use",
+ &prop_val);
+ if (ret) {
+ dev_err(dev, "mediatek,bled-channel-use DT property missing\n");
+ return ret;
+ }
+
+ if (!prop_val || prop_val > MT6370_BL_MAX_CH) {
+ dev_err(dev,
+ "No channel specified or over than upper bound (%d)\n",
+ prop_val);
+ return -EINVAL;
+ }
+
+ mask = MT6370_BL_EXT_EN_MASK | MT6370_BL_CH_MASK;
+ val = prop_val << (ffs(MT6370_BL_CH_MASK) - 1);
+
+ if (priv->enable_gpio)
+ val |= MT6370_BL_EXT_EN_MASK;
+
+ return regmap_update_bits(priv->regmap, MT6370_REG_BL_EN, mask, val);
+}
+
+static int mt6370_check_vendor_info(struct mt6370_priv *priv)
+{
+ /*
+ * MT6372 uses 14 bits to control the brightness but MT6370 and MT6371
+ * use 11 bits. They are different so we have to use this function to
+ * check the vendor ID and use different methods to calculate the
+ * brightness.
+ */
+ unsigned int dev_info, vid;
+ int ret;
+
+ ret = regmap_read(priv->regmap, MT6370_REG_DEV_INFO, &dev_info);
+ if (ret)
+ return ret;
+
+ vid = FIELD_GET(MT6370_VENID_MASK, dev_info);
+ if (vid == 0x9 || vid == 0xb)
+ priv->vid_type = MT6370_VID_6372;
+ else
+ priv->vid_type = MT6370_VID_COMMON;
+
+ return 0;
+}
+
+static int mt6370_bl_probe(struct platform_device *pdev)
+{
+ struct mt6370_priv *priv;
+ struct backlight_properties props = {
+ .type = BACKLIGHT_RAW,
+ .scale = BACKLIGHT_SCALE_LINEAR,
+ };
+ int ret;
+
+ priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ priv->dev = &pdev->dev;
+
+ priv->regmap = dev_get_regmap(pdev->dev.parent, NULL);
+ if (!priv->regmap)
+ dev_err_probe(&pdev->dev, -ENODEV, "Failed to get regmap\n");
+
+ ret = mt6370_check_vendor_info(priv);
+ if (ret)
+ dev_err_probe(&pdev->dev, ret, "Failed to check vendor info\n");
+
+ priv->enable_gpio = devm_gpiod_get_optional(&pdev->dev, "enable",
+ GPIOD_OUT_HIGH);
+ if (IS_ERR(priv->enable_gpio))
+ dev_err_probe(&pdev->dev, PTR_ERR(priv->enable_gpio),
+ "Failed to get 'enable' gpio\n");
+
+ ret = mt6370_init_backlight_properties(priv, &props);
+ if (ret)
+ dev_err_probe(&pdev->dev, ret,
+ "Failed to init backlight properties\n");
+
+ priv->bl = devm_backlight_device_register(&pdev->dev, pdev->name,
+ &pdev->dev, priv,
+ &mt6370_bl_ops, &props);
+ if (IS_ERR(priv->bl))
+ dev_err_probe(&pdev->dev, PTR_ERR(priv->bl),
+ "Failed to register backlight\n");
+
+ backlight_update_status(priv->bl);
+ platform_set_drvdata(pdev, priv);
+
+ return 0;
+}
+
+static int mt6370_bl_remove(struct platform_device *pdev)
+{
+ struct mt6370_priv *priv = platform_get_drvdata(pdev);
+ struct backlight_device *bl_dev = priv->bl;
+
+ bl_dev->props.brightness = 0;
+ backlight_update_status(priv->bl);
+
+ return 0;
+}
+
+static const struct of_device_id __maybe_unused mt6370_bl_of_match[] = {
+ { .compatible = "mediatek,mt6370-backlight", },
+ {}
+};
+MODULE_DEVICE_TABLE(of, mt6370_bl_of_match);
+
+static struct platform_driver mt6370_bl_driver = {
+ .driver = {
+ .name = "mt6370-backlight",
+ .of_match_table = mt6370_bl_of_match,
+ },
+ .probe = mt6370_bl_probe,
+ .remove = mt6370_bl_remove,
+};
+module_platform_driver(mt6370_bl_driver);
+
+MODULE_AUTHOR("ChiaEn Wu <[email protected]>");
+MODULE_DESCRIPTION("Mediatek MT6370 Backlight Driver");
+MODULE_LICENSE("GPL v2");
--
2.7.4
From: ChiYuan Huang <[email protected]>
Add Mediatek MT6370 TCPC binding documentation.
Signed-off-by: ChiYuan Huang <[email protected]>
Reviewed-by: Krzysztof Kozlowski <[email protected]>
---
.../bindings/usb/mediatek,mt6370-tcpc.yaml | 36 ++++++++++++++++++++++
1 file changed, 36 insertions(+)
create mode 100644 Documentation/devicetree/bindings/usb/mediatek,mt6370-tcpc.yaml
diff --git a/Documentation/devicetree/bindings/usb/mediatek,mt6370-tcpc.yaml b/Documentation/devicetree/bindings/usb/mediatek,mt6370-tcpc.yaml
new file mode 100644
index 0000000..aa083e9
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/mediatek,mt6370-tcpc.yaml
@@ -0,0 +1,36 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/usb/mediatek,mt6370-tcpc.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Mediatek MT6370 Type-C Port Switch and Power Delivery controller
+
+maintainers:
+ - ChiYuan Huang <[email protected]>
+
+description: |
+ Mediatek MT6370 is a multi-functional device.
+ It integrates charger, ADC, flash, RGB indicators,
+ regulators (DSV/VIBLDO), and TypeC Port Switch with Power Delivery controller.
+ This document only describes MT6370 Type-C Port Switch and
+ Power Delivery controller.
+
+properties:
+ compatible:
+ enum:
+ - mediatek,mt6370-tcpc
+
+ interrupts:
+ maxItems: 1
+
+ connector:
+ type: object
+ $ref: /schemas/connector/usb-connector.yaml#
+ unevaluatedProperties: false
+
+additionalProperties: false
+
+required:
+ - compatible
+ - interrupts
--
2.7.4
From: ChiYuan Huang <[email protected]>
Add mt6370 DisplayBias and VibLDO support.
Signed-off-by: ChiYuan Huang <[email protected]>
---
v3
- Refine Kconfig help text
---
drivers/regulator/Kconfig | 8 +
drivers/regulator/Makefile | 1 +
drivers/regulator/mt6370-regulator.c | 388 +++++++++++++++++++++++++++++++++++
3 files changed, 397 insertions(+)
create mode 100644 drivers/regulator/mt6370-regulator.c
diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
index cbe0f96..736f654a 100644
--- a/drivers/regulator/Kconfig
+++ b/drivers/regulator/Kconfig
@@ -804,6 +804,14 @@ config REGULATOR_MT6360
2-channel buck with Thermal Shutdown and Overload Protection
6-channel High PSRR and Low Dropout LDO.
+config REGULATOR_MT6370
+ tristate "MT6370 SubPMIC Regulator"
+ depends on MFD_MT6370
+ help
+ Say Y here to enable MT6370 regulator support.
+ This driver supports the control for DisplayBias voltages and one
+ general purpose LDO which is commonly used to drive the vibrator.
+
config REGULATOR_MT6380
tristate "MediaTek MT6380 PMIC"
depends on MTK_PMIC_WRAP
diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile
index 8d3ee8b..f1cbff2 100644
--- a/drivers/regulator/Makefile
+++ b/drivers/regulator/Makefile
@@ -97,6 +97,7 @@ obj-$(CONFIG_REGULATOR_MT6323) += mt6323-regulator.o
obj-$(CONFIG_REGULATOR_MT6358) += mt6358-regulator.o
obj-$(CONFIG_REGULATOR_MT6359) += mt6359-regulator.o
obj-$(CONFIG_REGULATOR_MT6360) += mt6360-regulator.o
+obj-$(CONFIG_REGULATOR_MT6370) += mt6370-regulator.o
obj-$(CONFIG_REGULATOR_MT6380) += mt6380-regulator.o
obj-$(CONFIG_REGULATOR_MT6397) += mt6397-regulator.o
obj-$(CONFIG_REGULATOR_MTK_DVFSRC) += mtk-dvfsrc-regulator.o
diff --git a/drivers/regulator/mt6370-regulator.c b/drivers/regulator/mt6370-regulator.c
new file mode 100644
index 0000000..bc356b4
--- /dev/null
+++ b/drivers/regulator/mt6370-regulator.c
@@ -0,0 +1,388 @@
+// SPDX-License-Identifier: GPL-2.0+
+
+#include <linux/bits.h>
+#include <linux/gpio/consumer.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/machine.h>
+
+enum {
+ MT6370_IDX_DSVBOOST = 0,
+ MT6370_IDX_DSVPOS,
+ MT6370_IDX_DSVNEG,
+ MT6370_IDX_VIBLDO,
+ MT6370_MAX_IDX
+};
+
+#define MT6370_REG_LDO_CFG 0x180
+#define MT6370_REG_LDO_VOUT 0x181
+#define MT6370_REG_DB_CTRL1 0x1B0
+#define MT6370_REG_DB_CTRL2 0x1B1
+#define MT6370_REG_DB_VBST 0x1B2
+#define MT6370_REG_DB_VPOS 0x1B3
+#define MT6370_REG_DB_VNEG 0x1B4
+#define MT6370_REG_LDO_STAT 0x1DC
+#define MT6370_REG_DB_STAT 0x1DF
+
+#define MT6370_LDOOMS_MASK BIT(7)
+#define MT6370_LDOEN_MASK BIT(7)
+#define MT6370_LDOVOUT_MASK GENMASK(3, 0)
+#define MT6370_DBPERD_MASK (BIT(7) | BIT(4))
+#define MT6370_DBEXTEN_MASK BIT(0)
+#define MT6370_DBVPOSEN_MASK BIT(6)
+#define MT6370_DBVPOSDISG_MASK BIT(5)
+#define MT6370_DBVNEGEN_MASK BIT(3)
+#define MT6370_DBVNEGDISG_MASK BIT(2)
+#define MT6370_DBALLON_MASK (MT6370_DBVPOSEN_MASK | MT6370_DBVNEGEN_MASK)
+#define MT6370_DBSLEW_MASK GENMASK(7, 6)
+#define MT6370_DBVOUT_MASK GENMASK(5, 0)
+#define MT6370_LDOOC_EVT_MASK BIT(7)
+#define MT6370_POSSCP_EVT_MASK BIT(7)
+#define MT6370_NEGSCP_EVT_MASK BIT(6)
+#define MT6370_BSTOCP_EVT_MASK BIT(5)
+#define MT6370_POSOCP_EVT_MASK BIT(4)
+#define MT6370_NEGOCP_EVT_MASK BIT(3)
+
+#define MT6370_LDO_MINUV 1600000
+#define MT6370_LDO_STPUV 200000
+#define MT6370_LDO_N_VOLT 13
+#define MT6370_DBVBOOST_MINUV 4000000
+#define MT6370_DBVBOOST_STPUV 50000
+#define MT6370_DBVBOOST_N_VOLT 45
+#define MT6370_DBVOUT_MINUV 4000000
+#define MT6370_DBVOUT_STPUV 50000
+#define MT6370_DBVOUT_N_VOLT 41
+
+struct mt6370_priv {
+ struct device *dev;
+ struct regmap *regmap;
+ struct regulator_dev *rdev[MT6370_MAX_IDX];
+ bool use_external_ctrl;
+};
+
+static const unsigned int mt6370_vpos_ramp_tbl[] = { 8540, 5840, 4830, 3000 };
+static const unsigned int mt6370_vneg_ramp_tbl[] = { 10090, 6310, 5050, 3150 };
+
+static int mt6370_get_error_flags(struct regulator_dev *rdev,
+ unsigned int *flags)
+{
+ struct regmap *regmap = rdev_get_regmap(rdev);
+ unsigned int stat_reg, stat, rpt_flags = 0;
+ int rid = rdev_get_id(rdev), ret;
+
+ if (rid == MT6370_IDX_VIBLDO)
+ stat_reg = MT6370_REG_LDO_STAT;
+ else
+ stat_reg = MT6370_REG_DB_STAT;
+
+ ret = regmap_read(regmap, stat_reg, &stat);
+ if (ret)
+ return ret;
+
+ switch (rid) {
+ case MT6370_IDX_DSVBOOST:
+ if (stat & MT6370_BSTOCP_EVT_MASK)
+ rpt_flags |= REGULATOR_ERROR_OVER_CURRENT;
+ break;
+ case MT6370_IDX_DSVPOS:
+ if (stat & MT6370_POSSCP_EVT_MASK)
+ rpt_flags |= REGULATOR_ERROR_UNDER_VOLTAGE;
+
+ if (stat & MT6370_POSOCP_EVT_MASK)
+ rpt_flags |= REGULATOR_ERROR_OVER_CURRENT;
+ break;
+ case MT6370_IDX_DSVNEG:
+ if (stat & MT6370_NEGSCP_EVT_MASK)
+ rpt_flags |= REGULATOR_ERROR_UNDER_VOLTAGE;
+
+ if (stat & MT6370_NEGOCP_EVT_MASK)
+ rpt_flags |= REGULATOR_ERROR_OVER_CURRENT;
+ break;
+ default:
+ if (stat & MT6370_LDOOC_EVT_MASK)
+ rpt_flags |= REGULATOR_ERROR_OVER_CURRENT;
+ break;
+ }
+
+ *flags = rpt_flags;
+ return 0;
+}
+
+static const struct regulator_ops mt6370_dbvboost_ops = {
+ .get_voltage_sel = regulator_get_voltage_sel_regmap,
+ .set_voltage_sel = regulator_set_voltage_sel_regmap,
+ .list_voltage = regulator_list_voltage_linear,
+ .get_bypass = regulator_get_bypass_regmap,
+ .set_bypass = regulator_set_bypass_regmap,
+ .get_error_flags = mt6370_get_error_flags,
+};
+
+static const struct regulator_ops mt6370_dbvout_ops = {
+ .get_voltage_sel = regulator_get_voltage_sel_regmap,
+ .set_voltage_sel = regulator_set_voltage_sel_regmap,
+ .list_voltage = regulator_list_voltage_linear,
+ .is_enabled = regulator_is_enabled_regmap,
+ .enable = regulator_enable_regmap,
+ .disable = regulator_disable_regmap,
+ .set_active_discharge = regulator_set_active_discharge_regmap,
+ .set_ramp_delay = regulator_set_ramp_delay_regmap,
+ .get_error_flags = mt6370_get_error_flags,
+};
+
+static const struct regulator_ops mt6370_ldo_ops = {
+ .get_voltage_sel = regulator_get_voltage_sel_regmap,
+ .set_voltage_sel = regulator_set_voltage_sel_regmap,
+ .list_voltage = regulator_list_voltage_linear,
+ .is_enabled = regulator_is_enabled_regmap,
+ .enable = regulator_enable_regmap,
+ .disable = regulator_disable_regmap,
+ .set_active_discharge = regulator_set_active_discharge_regmap,
+ .get_error_flags = mt6370_get_error_flags,
+};
+
+static int mt6370_of_parse_cb(struct device_node *np,
+ const struct regulator_desc *desc,
+ struct regulator_config *config)
+{
+ struct mt6370_priv *priv = config->driver_data;
+ struct gpio_desc *enable_gpio;
+ int ret;
+
+ enable_gpio = gpiod_get_from_of_node(np, "enable", 0, GPIOD_OUT_HIGH |
+ GPIOD_FLAGS_BIT_NONEXCLUSIVE,
+ desc->name);
+ if (IS_ERR(enable_gpio)) {
+ config->ena_gpiod = NULL;
+ return 0;
+ }
+
+ /*
+ * RG control by default
+ * Only if all are using external pin, change all by external control
+ */
+ if (priv->use_external_ctrl) {
+ ret = regmap_update_bits(priv->regmap, MT6370_REG_DB_CTRL1,
+ MT6370_DBEXTEN_MASK,
+ MT6370_DBEXTEN_MASK);
+ if (ret)
+ return ret;
+ }
+
+ config->ena_gpiod = enable_gpio;
+ priv->use_external_ctrl = true;
+ return 0;
+}
+
+static const struct regulator_desc mt6370_regulator_descs[] = {
+ {
+ .name = "mt6370-dsv-vbst",
+ .of_match = of_match_ptr("dsvbst"),
+ .regulators_node = of_match_ptr("regulators"),
+ .id = MT6370_IDX_DSVBOOST,
+ .type = REGULATOR_VOLTAGE,
+ .owner = THIS_MODULE,
+ .ops = &mt6370_dbvboost_ops,
+ .min_uV = MT6370_DBVBOOST_MINUV,
+ .uV_step = MT6370_DBVBOOST_STPUV,
+ .n_voltages = MT6370_DBVBOOST_N_VOLT,
+ .vsel_reg = MT6370_REG_DB_VBST,
+ .vsel_mask = MT6370_DBVOUT_MASK,
+ .bypass_reg = MT6370_REG_DB_CTRL1,
+ .bypass_mask = MT6370_DBPERD_MASK,
+ .bypass_val_on = MT6370_DBPERD_MASK,
+ },
+ {
+ .name = "mt6370-dsv-vpos",
+ .of_match = of_match_ptr("dsvpos"),
+ .regulators_node = of_match_ptr("regulators"),
+ .id = MT6370_IDX_DSVPOS,
+ .type = REGULATOR_VOLTAGE,
+ .owner = THIS_MODULE,
+ .of_parse_cb = mt6370_of_parse_cb,
+ .ops = &mt6370_dbvout_ops,
+ .min_uV = MT6370_DBVOUT_MINUV,
+ .uV_step = MT6370_DBVOUT_STPUV,
+ .n_voltages = MT6370_DBVOUT_N_VOLT,
+ .vsel_reg = MT6370_REG_DB_VPOS,
+ .vsel_mask = MT6370_DBVOUT_MASK,
+ .enable_reg = MT6370_REG_DB_CTRL2,
+ .enable_mask = MT6370_DBVPOSEN_MASK,
+ .ramp_reg = MT6370_REG_DB_VPOS,
+ .ramp_mask = MT6370_DBSLEW_MASK,
+ .ramp_delay_table = mt6370_vpos_ramp_tbl,
+ .n_ramp_values = ARRAY_SIZE(mt6370_vpos_ramp_tbl),
+ .active_discharge_reg = MT6370_REG_DB_CTRL2,
+ .active_discharge_mask = MT6370_DBVPOSDISG_MASK,
+ .active_discharge_on = MT6370_DBVPOSDISG_MASK,
+ },
+ {
+ .name = "mt6370-dsv-vneg",
+ .of_match = of_match_ptr("dsvneg"),
+ .regulators_node = of_match_ptr("regulators"),
+ .id = MT6370_IDX_DSVNEG,
+ .type = REGULATOR_VOLTAGE,
+ .owner = THIS_MODULE,
+ .of_parse_cb = mt6370_of_parse_cb,
+ .ops = &mt6370_dbvout_ops,
+ .min_uV = MT6370_DBVOUT_MINUV,
+ .uV_step = MT6370_DBVOUT_STPUV,
+ .n_voltages = MT6370_DBVOUT_N_VOLT,
+ .vsel_reg = MT6370_REG_DB_VNEG,
+ .vsel_mask = MT6370_DBVOUT_MASK,
+ .enable_reg = MT6370_REG_DB_CTRL2,
+ .enable_mask = MT6370_DBVNEGEN_MASK,
+ .ramp_reg = MT6370_REG_DB_VNEG,
+ .ramp_mask = MT6370_DBSLEW_MASK,
+ .ramp_delay_table = mt6370_vneg_ramp_tbl,
+ .n_ramp_values = ARRAY_SIZE(mt6370_vneg_ramp_tbl),
+ .active_discharge_reg = MT6370_REG_DB_CTRL2,
+ .active_discharge_mask = MT6370_DBVNEGDISG_MASK,
+ .active_discharge_on = MT6370_DBVNEGDISG_MASK,
+ },
+ {
+ .name = "mt6370-vib-ldo",
+ .of_match = of_match_ptr("vibldo"),
+ .regulators_node = of_match_ptr("regulators"),
+ .id = MT6370_IDX_VIBLDO,
+ .type = REGULATOR_VOLTAGE,
+ .owner = THIS_MODULE,
+ .ops = &mt6370_ldo_ops,
+ .min_uV = MT6370_LDO_MINUV,
+ .uV_step = MT6370_LDO_STPUV,
+ .n_voltages = MT6370_LDO_N_VOLT,
+ .vsel_reg = MT6370_REG_LDO_VOUT,
+ .vsel_mask = MT6370_LDOVOUT_MASK,
+ .enable_reg = MT6370_REG_LDO_VOUT,
+ .enable_mask = MT6370_LDOEN_MASK,
+ .active_discharge_reg = MT6370_REG_LDO_CFG,
+ .active_discharge_mask = MT6370_LDOOMS_MASK,
+ .active_discharge_on = MT6370_LDOOMS_MASK,
+ }
+};
+
+static irqreturn_t mt6370_scp_handler(int irq, void *data)
+{
+ struct regulator_dev *rdev = data;
+
+ regulator_notifier_call_chain(rdev, REGULATOR_EVENT_UNDER_VOLTAGE,
+ NULL);
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t mt6370_ocp_handler(int irq, void *data)
+{
+ struct regulator_dev *rdev = data;
+
+ regulator_notifier_call_chain(rdev, REGULATOR_EVENT_OVER_CURRENT, NULL);
+ return IRQ_HANDLED;
+}
+
+static int mt6370_regulator_irq_register(struct mt6370_priv *priv)
+{
+ struct platform_device *pdev = to_platform_device(priv->dev);
+ static const struct {
+ const char *name;
+ int rid;
+ irq_handler_t handler;
+ } mt6370_irqs[] = {
+ { "db_vpos_scp", MT6370_IDX_DSVPOS, mt6370_scp_handler },
+ { "db_vneg_scp", MT6370_IDX_DSVNEG, mt6370_scp_handler },
+ { "db_vbst_ocp", MT6370_IDX_DSVBOOST, mt6370_ocp_handler },
+ { "db_vpos_ocp", MT6370_IDX_DSVPOS, mt6370_ocp_handler },
+ { "db_vneg_ocp", MT6370_IDX_DSVNEG, mt6370_ocp_handler },
+ { "ldo_oc", MT6370_IDX_VIBLDO, mt6370_ocp_handler }
+ };
+ struct regulator_dev *rdev;
+ int i, irq, ret;
+
+ for (i = 0; i < ARRAY_SIZE(mt6370_irqs); i++) {
+ irq = platform_get_irq_byname(pdev, mt6370_irqs[i].name);
+
+ rdev = priv->rdev[mt6370_irqs[i].rid];
+
+ ret = devm_request_threaded_irq(priv->dev, irq, NULL,
+ mt6370_irqs[i].handler, 0,
+ mt6370_irqs[i].name, rdev);
+ if (ret) {
+ dev_err(priv->dev,
+ "Failed to register (%d) interrupt\n", i);
+ return ret;
+ }
+ }
+
+ return 0;
+}
+
+static int mt6370_regualtor_register(struct mt6370_priv *priv)
+{
+ struct regulator_dev *rdev;
+ struct regulator_config cfg = {};
+ struct device *parent = priv->dev->parent;
+ int i;
+
+ cfg.dev = parent;
+ cfg.driver_data = priv;
+
+ for (i = 0; i < MT6370_MAX_IDX; i++) {
+ rdev = devm_regulator_register(priv->dev,
+ mt6370_regulator_descs + i,
+ &cfg);
+ if (IS_ERR(rdev)) {
+ dev_err(priv->dev,
+ "Failed to register (%d) regulator\n", i);
+ return PTR_ERR(rdev);
+ }
+
+ priv->rdev[i] = rdev;
+ }
+
+ return 0;
+}
+
+static int mt6370_regulator_probe(struct platform_device *pdev)
+{
+ struct mt6370_priv *priv;
+ int ret;
+
+ priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ priv->dev = &pdev->dev;
+
+ priv->regmap = dev_get_regmap(pdev->dev.parent, NULL);
+ if (!priv->regmap) {
+ dev_err(&pdev->dev, "Failed to init regmap\n");
+ return -ENODEV;
+ }
+
+ ret = mt6370_regualtor_register(priv);
+ if (ret)
+ return ret;
+
+ return mt6370_regulator_irq_register(priv);
+}
+
+static const struct platform_device_id mt6370_devid_table[] = {
+ { "mt6370-regulator", 0},
+ {}
+};
+MODULE_DEVICE_TABLE(platform, mt6370_devid_table);
+
+static struct platform_driver mt6370_regulator_driver = {
+ .driver = {
+ .name = "mt6370-regulator",
+ },
+ .id_table = mt6370_devid_table,
+ .probe = mt6370_regulator_probe,
+};
+module_platform_driver(mt6370_regulator_driver);
+
+MODULE_AUTHOR("ChiYuan Huang <[email protected]>");
+MODULE_DESCRIPTION("Mediatek MT6370 Regulator Driver");
+MODULE_LICENSE("GPL v2");
--
2.7.4
On Thu, Jun 23, 2022 at 07:56:22PM +0800, ChiaEn Wu wrote:
> From: ChiYuan Huang <[email protected]>
>
> Add mt6370 backlight binding documentation.
>
> Signed-off-by: ChiYuan Huang <[email protected]>
> ---
>
> v3
> - Rename "mediatek,bled-pwm-hys-input-threshold-steps" to
> "mediatek,bled-pwm-hys-input-th-steps"
> - Refine "bled-pwm-hys-input-th-steps", "bled-ovp-microvolt",
> "bled-ocp-microamp" enum values
> ---
> .../leds/backlight/mediatek,mt6370-backlight.yaml | 92 ++++++++++++++++++++++
> 1 file changed, 92 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/leds/backlight/mediatek,mt6370-backlight.yaml
>
> diff --git a/Documentation/devicetree/bindings/leds/backlight/mediatek,mt6370-backlight.yaml b/Documentation/devicetree/bindings/leds/backlight/mediatek,mt6370-backlight.yaml
> new file mode 100644
> index 0000000..26563ae
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/leds/backlight/mediatek,mt6370-backlight.yaml
> @@ -0,0 +1,92 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/leds/backlight/mediatek,mt6370-backlight.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Mediatek MT6370 Backlight
> +
> +maintainers:
> + - ChiaEn Wu <[email protected]>
> +
> +description: |
> + This module is part of the MT6370 MFD device.
> + The MT6370 Backlight WLED driver supports up to a 29V output voltage for
> + 4 channels of 8 series WLEDs. Each channel supports up to 30mA of current
> + capability with 2048 current steps (11 bits) in exponential or linear
> + mapping curves.
> +
> +allOf:
> + - $ref: common.yaml#
> +
> +properties:
> + compatible:
> + const: mediatek,mt6370-backlight
> +
> + default-brightness:
> + minimum: 0
> + maximum: 2048
> +
> + max-brightness:
> + minimum: 0
> + maximum: 2048
> +
> + enable-gpios:
> + description: External backlight 'enable' pin
> + maxItems: 1
> +
> + mediatek,bled-pwm-enable:
> + description: |
> + Enable external PWM input for backlight dimming
> + type: boolean
> +
> + mediatek,bled-pwm-hys-enable:
> + description: |
> + Enable the backlight input-hysteresis for PWM mode
> + type: boolean
> +
> + mediatek,bled-pwm-hys-input-th-steps:
> + $ref: /schemas/types.yaml#/definitions/uint8
> + enum: [1, 4, 16, 64]
> + description: |
> + The selection of the upper and lower bounds threshold of backlight
> + PWM resolution. If we choose selection 64, the variation of PWM
> + resolution needs over than 64 steps.
more than?
Thanks,
Joe
> +
> + mediatek,bled-ovp-shutdown:
> + description: |
> + Enable the backlight shutdown when OVP level triggered
> + type: boolean
> +
> + mediatek,bled-ovp-microvolt:
> + enum: [17000000, 21000000, 25000000, 29000000]
> + description: |
> + Backlight OVP level selection.
> +
> + mediatek,bled-ocp-shutdown:
> + description: |
> + Enable the backlight shutdown when OCP level triggerred.
> + type: boolean
> +
> + mediatek,bled-ocp-microamp:
> + enum: [900000, 1200000, 1500000, 1800000]
> + description: |
> + Backlight OC level selection.
> +
> + mediatek,bled-channel-use:
> + $ref: /schemas/types.yaml#/definitions/uint8
> + description: |
> + Backlight LED channel to be used.
> + Each bit mapping to:
> + - 0: CH4
> + - 1: CH3
> + - 2: CH2
> + - 3: CH1
> + minimum: 1
> + maximum: 15
> +
> +required:
> + - compatible
> + - mediatek,bled-channel-use
> +
> +additionalProperties: false
> --
> 2.7.4
>
On Thu, Jun 23, 2022 at 07:56:31PM +0800, ChiaEn Wu wrote:
> From: ChiaEn Wu <[email protected]>
>
> Add Mediatek MT6370 Backlight support.
>
> Signed-off-by: ChiaEn Wu <[email protected]>
> diff --git a/drivers/video/backlight/Kconfig b/drivers/video/backlight/Kconfig
> index a003e02..7cd823d 100644
> <snip>
> +static int mt6370_init_backlight_properties(struct mt6370_priv *priv,
> + struct backlight_properties *props)
> +{
> + struct device *dev = priv->dev;
> + u8 prop_val;
> + u32 brightness, ovp_uV, ocp_uA;
> + unsigned int mask, val;
> + int ret;
> +
> + /* Vendor optional properties */
> + val = 0;
> + if (device_property_read_bool(dev, "mediatek,bled-pwm-enable"))
> + val |= MT6370_BL_PWM_EN_MASK;
> +
> + if (device_property_read_bool(dev, "mediatek,bled-pwm-hys-enable"))
> + val |= MT6370_BL_PWM_HYS_EN_MASK;
> +
> + ret = device_property_read_u8(dev,
> + "mediatek,bled-pwm-hys-input-th-steps",
> + &prop_val);
> + if (!ret) {
> + prop_val = clamp_val(prop_val,
> + MT6370_BL_PWM_HYS_TH_MIN_STEP,
> + MT6370_BL_PWM_HYS_TH_MAX_STEP);
> + /*
> + * prop_val = 1 --> 1 steps --> 0x00
> + * prop_val = 2 ~ 4 --> 4 steps --> 0x01
> + * prop_val = 5 ~ 16 --> 16 steps --> 0x10
> + * prop_val = 17 ~ 64 --> 64 steps --> 0x11
^^^^^
These numbers are binary, not hex, right? If so, the comments
should be 0b00 to 0b03 .
> + */
> + prop_val = (ilog2(roundup_pow_of_two(prop_val)) + 1) >> 1;
> + val |= prop_val << (ffs(MT6370_BL_PWM_HYS_SEL_MASK) - 1);
> + }
> +
> + ret = regmap_update_bits(priv->regmap, MT6370_REG_BL_PWM,
> + val, val);
> + if (ret)
> + return ret;
Overall, I like this approach! Easy to read and understand.
> <snip>
> +static int mt6370_bl_probe(struct platform_device *pdev)
> +{
> + struct mt6370_priv *priv;
> + struct backlight_properties props = {
> + .type = BACKLIGHT_RAW,
> + .scale = BACKLIGHT_SCALE_LINEAR,
Sorry, I missed this before but the KConfig comment says that the
backlight can support both linear and exponential curves.
Is there a good reason to default to linear?
Daniel.
>
On Thu, 23 Jun 2022 19:56:17 +0800, ChiaEn Wu wrote:
> From: ChiaEn Wu <[email protected]>
>
> This patch series add Mediatek MT6370 PMIC support. The MT6370 is a
> highly-integrated smart power management IC, which includes a single
> cell Li-Ion/Li-Polymer switching battery charger, a USB
> Type-C & Power Delivery (PD) controller, dual Flash LED current sources,
> a RGB LED driver, a backlight WLED driver, a display bias driver and a
> general LDO for portable devices.
>
> [...]
Applied to
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git for-next
Thanks!
[09/14] regulator: mt6370: Add mt6370 DisplayBias and VibLDO support
commit: 8171c93bac1bf9e98269b2efb19ef4e6c4e55ed7
All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying
to this mail.
Thanks,
Mark
On Thu, Jun 23, 2022 at 1:59 PM ChiaEn Wu <[email protected]> wrote:
>
> From: ChiYuan Huang <[email protected]>
>
> Add Mediatek MT6370 MFD support.
...
> +config MFD_MT6370
> + tristate "Mediatek MT6370 SubPMIC"
> + select MFD_CORE
> + select REGMAP_I2C
> + select REGMAP_IRQ
> + depends on I2C
> + help
> + Say Y here to enable MT6370 SubPMIC functional support.
> + It consists of a single cell battery charger with ADC monitoring, RGB
> + LEDs, dual channel flashlight, WLED backlight driver, display bias
> + voltage supply, one general purpose LDO, and the USB Type-C & PD
> + controller complies with the latest USB Type-C and PD standards.
What will be the module name in case it's chosen to be built as a module?
...
> obj-$(CONFIG_INTEL_SOC_PMIC_BXTWC) += intel_soc_pmic_bxtwc.o
> obj-$(CONFIG_INTEL_SOC_PMIC_CHTWC) += intel_soc_pmic_chtwc.o
> obj-$(CONFIG_INTEL_SOC_PMIC_CHTDC_TI) += intel_soc_pmic_chtdc_ti.o
> obj-$(CONFIG_MFD_MT6360) += mt6360-core.o
> +obj-$(CONFIG_MFD_MT6370) += mt6370.o
> mt6397-objs := mt6397-core.o mt6397-irq.o mt6358-irq.o
> obj-$(CONFIG_MFD_MT6397) += mt6397.o
> obj-$(CONFIG_INTEL_SOC_PMIC_MRFLD) += intel_soc_pmic_mrfld.o
This whole bunch of drivers is in the wrong place in Makefile.
https://lore.kernel.org/all/[email protected]/
...
> +#define MT6370_REG_MAXADDR 0x1FF
Wondering if (BIT(10) - 1) gives a better hint on how hardware limits
this (so it will be clear it's 10-bit address).
...
> +static int mt6370_check_vendor_info(struct mt6370_info *info)
> +{
> + unsigned int devinfo;
> + int ret;
> +
> + ret = regmap_read(info->regmap, MT6370_REG_DEV_INFO, &devinfo);
> + if (ret)
> + return ret;
> +
> + switch (FIELD_GET(MT6370_VENID_MASK, devinfo)) {
> + case MT6370_VENID_RT5081:
> + case MT6370_VENID_RT5081A:
> + case MT6370_VENID_MT6370:
> + case MT6370_VENID_MT6371:
> + case MT6370_VENID_MT6372P:
> + case MT6370_VENID_MT6372CP:
return 0;
> + break;
> + default:
> + dev_err(info->dev, "Unknown Vendor ID 0x%02x\n", devinfo);
> + return -ENODEV;
> + }
> +
> + return 0;
...and drop these two lines?
> +}
...
> + bank_idx = *(u8 *)reg_buf;
> + bank_addr = *(u8 *)(reg_buf + 1);
Why not
const u8 *u8_buf = reg_buf;
bank_idx = u8_buf[0];
bank_addr = u8_buf[1];
?
...
> + if (ret < 0)
> + return ret;
> + else if (ret != val_size)
Redundant 'else'.
> + return -EIO;
...
> + bank_idx = *(u8 *)data;
> + bank_addr = *(u8 *)(data + 1);
As per above.
--
With Best Regards,
Andy Shevchenko
On Thu, Jun 23, 2022 at 2:00 PM ChiaEn Wu <[email protected]> wrote:
>
> From: ChiYuan Huang <[email protected]>
>
> Add mt6370 DisplayBias and VibLDO support.
...
> +#include <linux/bits.h>
> +#include <linux/gpio/consumer.h>
> +#include <linux/interrupt.h>
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
Any users of this? (See below)
> +#include <linux/platform_device.h>
> +#include <linux/regmap.h>
> +#include <linux/regulator/driver.h>
> +#include <linux/regulator/machine.h>
...
> +#define MT6370_LDO_MINUV 1600000
> +#define MT6370_LDO_STPUV 200000
> +#define MT6370_LDO_N_VOLT 13
> +#define MT6370_DBVBOOST_MINUV 4000000
> +#define MT6370_DBVBOOST_STPUV 50000
> +#define MT6370_DBVBOOST_N_VOLT 45
> +#define MT6370_DBVOUT_MINUV 4000000
> +#define MT6370_DBVOUT_STPUV 50000
> +#define MT6370_DBVOUT_N_VOLT 41
If UV is a unit suffix, make it _UV.
...
> + .of_match = of_match_ptr("dsvbst"),
Would it even be called / used if CONFIG_OF=n?
...
> + .regulators_node = of_match_ptr("regulators"),
Ditto.
...
> + for (i = 0; i < ARRAY_SIZE(mt6370_irqs); i++) {
> + irq = platform_get_irq_byname(pdev, mt6370_irqs[i].name);
> +
> + rdev = priv->rdev[mt6370_irqs[i].rid];
> +
> + ret = devm_request_threaded_irq(priv->dev, irq, NULL,
> + mt6370_irqs[i].handler, 0,
> + mt6370_irqs[i].name, rdev);
> + if (ret) {
> + dev_err(priv->dev,
> + "Failed to register (%d) interrupt\n", i);
> + return ret;
return dev_err_probe(...); ?
> + }
> + }
...
> + for (i = 0; i < MT6370_MAX_IDX; i++) {
> + rdev = devm_regulator_register(priv->dev,
> + mt6370_regulator_descs + i,
> + &cfg);
> + if (IS_ERR(rdev)) {
> + dev_err(priv->dev,
> + "Failed to register (%d) regulator\n", i);
> + return PTR_ERR(rdev);
return dev_err_probe(...); ?
> + }
> +
> + priv->rdev[i] = rdev;
> + }
...
> + if (!priv->regmap) {
> + dev_err(&pdev->dev, "Failed to init regmap\n");
> + return -ENODEV;
> + }
return dev_err_probe(...);
--
With Best Regards,
Andy Shevchenko
On Thu, Jun 23, 2022 at 2:00 PM ChiaEn Wu <[email protected]> wrote:
>
> From: ChiaEn Wu <[email protected]>
>
> Add Mediatek MT6370 ADC support.
...
> +config MEDIATEK_MT6370_ADC
> + tristate "Mediatek MT6370 ADC driver"
> + depends on MFD_MT6370
> + help
> + Say yes here to enable Mediatek MT6370 ADC support.
> +
> + This ADC driver provides 9 channels for system monitoring (charger
> + current, voltage, and temperature).
What will be the module name?
...
> +#include <dt-bindings/iio/adc/mediatek,mt6370_adc.h>
Usually this goes after linux/* asm/* as it's not so generic.
> +#include <linux/bits.h>
> +#include <linux/bitfield.h>
> +#include <linux/iio/iio.h>
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/mod_devicetable.h>
I believe the order should be otherwise, this is first followed by module.h.
> +#include <linux/mutex.h>
> +#include <linux/platform_device.h>
> +#include <linux/regmap.h>
...
> +#define ADC_CONV_POLLING_TIME 1000
If it's time, add a unit suffix, if it's a counter, make it clear.
...
> + msleep(ADC_CONV_TIME_US / 1000);
Why define microseconds if milliseconds are in use?
...
> + ret = regmap_read_poll_timeout(priv->regmap,
> + MT6370_REG_CHG_ADC, reg_val,
> + !(reg_val & MT6370_ADC_START_MASK),
> + ADC_CONV_POLLING_TIME,
> + ADC_CONV_TIME_US * 3);
> + if (ret) {
> + if (ret == -ETIMEDOUT)
> + dev_err(priv->dev, "Failed to wait ADC conversion\n");
wait for
> + else
> + dev_err(priv->dev,
> + "Failed to read ADC register (%d)\n", ret);
Do you really need to differentiate the errors here? I believe the
latter one covers all cases.
> + goto adc_unlock;
> + }
...
> +#define MT6370_ADC_CHAN(_idx, _type, _addr, _extra_info) { \
> + .type = _type, \
> + .channel = MT6370_CHAN_##_idx, \
> + .address = _addr, \
> + .scan_index = MT6370_CHAN_##_idx, \
> + .indexed = 1, \
> + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \
> + BIT(IIO_CHAN_INFO_SCALE) | \
> + _extra_info \
Leave a comma after the last member as well.
> +}
...
> + regmap = dev_get_regmap(pdev->dev.parent, NULL);
> + if (!regmap) {
> + dev_err(&pdev->dev, "Failed to get regmap\n");
> + return -ENODEV;
return dev_err_probe(...);
> + }
...
> + ret = regmap_write(priv->regmap, MT6370_REG_CHG_ADC, 0);
> + if (ret) {
> + dev_err(&pdev->dev, "Failed to reset ADC\n");
> + return ret;
> + }
Ditto.
--
With Best Regards,
Andy Shevchenko
On Thu, Jun 23, 2022 at 2:00 PM ChiaEn Wu <[email protected]> wrote:
>
> From: ChiYuan Huang <[email protected]>
>
> Add chip level mt6370 tcpci driver.
...
> +config TYPEC_TCPCI_MT6370
> + tristate "Mediatek MT6370 Type-C driver"
> + depends on MFD_MT6370
> + help
> + Mediatek MT6370 is a multi-functional IC that includes
> + USB Type-C. It works with Type-C Port Controller Manager
> + to provide USB PD and USB Type-C functionalities.
What will be the module name?
...
> +#include <linux/bits.h>
> +#include <linux/interrupt.h>
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
No user of this header is found in this file.
> +#include <linux/platform_device.h>
> +#include <linux/pm_wakeup.h>
> +#include <linux/pm_wakeirq.h>
> +#include <linux/regmap.h>
> +#include <linux/regulator/consumer.h>
> +#include <linux/usb/tcpm.h>
> +#include "tcpci.h"
...
> + if (did == MT6370_TCPC_DID_A) {
> + ret = regmap_write(data->regmap, TCPC_FAULT_CTRL, 0x80);
> + if (ret)
> + return ret;
return regmap_write(...);
> + }
> +
> + return 0;
...
> + if (ret && !source)
> + ret = regulator_disable(priv->vbus);
> + else if (!ret && source)
> + ret = regulator_enable(priv->vbus);
> + else
> + ret = 0;
> +
> + return ret;
Can it be
if (ret && ...)
return regulator_disable(...);
if (!ret && ...)
return regulator_enable(...);
return 0;
?
...
> + if (!priv->tcpci_data.regmap) {
> + dev_err(&pdev->dev, "Failed to init regmap\n");
> + return -ENODEV;
> + }
return dev_err_probe(...); ?
...
> + if (ret) {
> + dev_err(&pdev->dev, "Failed to check vendor info (%d)\n", ret);
> + return ret;
> + }
Ditto.
...
> + priv->irq = platform_get_irq(pdev, 0);
> + if (priv->irq < 0) {
> + dev_err(&pdev->dev, "Failed to get TCPC irq (%d)\n", priv->irq);
The message like this is printed in case of error inside
platform_get_irq(), no need to duplicate.
> + return priv->irq;
> + }
...
> + priv->tcpci = tcpci_register_port(&pdev->dev, &priv->tcpci_data);
> + if (IS_ERR(priv->tcpci)) {
> + dev_err(&pdev->dev, "Failed to register tcpci port\n");
> + return PTR_ERR(priv->tcpci);
return dev_err_probe(); ?
> + }
...
> + if (ret) {
> + dev_err(&pdev->dev, "Failed to allocate irq (%d)\n", ret);
> + tcpci_unregister_port(priv->tcpci);
> + return ret;
Ditto.
> + }
--
With Best Regards,
Andy Shevchenko
On 6/23/22 04:56, ChiaEn Wu wrote:
> diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
> index a49979f..a8c58c3 100644
> --- a/drivers/leds/Kconfig
> +++ b/drivers/leds/Kconfig
> @@ -244,6 +244,17 @@ config LEDS_MT6323
> This option enables support for on-chip LED drivers found on
> Mediatek MT6323 PMIC.
>
> +config LEDS_MT6370_RGB
> + tristate "LED Support for Mediatek MT6370 PMIC"
> + depends on LEDS_CLASS
> + depends on MFD_MT6370
> + select LINEAR_RANGE
> + help
> + Say Y here to enable support for MT6370_RGB LED device.
> + In MT6370, there are four channel current-sink LED drivers that
> + support hardware pattern for const current, PWM, and breath mode.
Spell out "constant" (if that is what "const" means here). ?
> + Isink4 channel can also be used as a CHG_VIN power good indicator.
--
~Randy
On Thu, Jun 23, 2022 at 2:00 PM ChiaEn Wu <[email protected]> wrote:
>
> From: ChiaEn Wu <[email protected]>
>
> Add Mediatek MT6370 charger driver.
...
> +config CHARGER_MT6370
> + tristate "Mediatek MT6370 Charger Driver"
> + depends on MFD_MT6370
> + depends on REGULATOR
> + select LINEAR_RANGES
> + help
> + Say Y here to enable MT6370 Charger Part.
> + The device supports High-Accuracy Voltage/Current Regulation,
> + Average Input Current Regulation, Battery Temperature Sensing,
> + Over-Temperature Protection, DPDM Detection for BC1.2.
Module name?
...
> +#include <dt-bindings/iio/adc/mediatek,mt6370_adc.h>
This usually goes after linux/*
> +#include <linux/atomic.h>
> +#include <linux/bitfield.h>
> +#include <linux/bits.h>
> +#include <linux/gpio/consumer.h>
> +#include <linux/iio/consumer.h>
> +#include <linux/init.h>
> +#include <linux/interrupt.h>
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/platform_device.h>
> +#include <linux/power_supply.h>
> +#include <linux/regmap.h>
> +#include <linux/regulator/driver.h>
> +#include <linux/workqueue.h>
...
> +#define MT6370_MIVR_IBUS_TH 100000 /* 100 mA */
Instead of comment, add proper units.
...
> + MT6370_USB_STAT_DCP,
> + MT6370_USB_STAT_CDP,
> + MT6370_USB_STAT_MAX,
No comma for a terminator line.
...
> +static inline u32 mt6370_chg_val_to_reg(const struct mt6370_chg_range *range,
> + u32 val)
> +static inline u32 mt6370_chg_reg_to_val(const struct mt6370_chg_range *range,
> + u8 reg)
I'm wondering if you can use the
https://elixir.bootlin.com/linux/v5.19-rc3/source/include/linux/linear_range.h
APIs.
...
> + int ret = 0;
This seems a redundant assignment, see below.
> + rcfg->ena_gpiod = fwnode_gpiod_get_index(of_fwnode_handle(of),
> + "enable", 0,
For index == 0 don't use _index API.
> + GPIOD_OUT_LOW |
> + GPIOD_FLAGS_BIT_NONEXCLUSIVE,
> + rdesc->name);
> + if (IS_ERR(rcfg->ena_gpiod)) {
> + dev_err(priv->dev, "Failed to requeset OTG EN Pin\n");
request
> + rcfg->ena_gpiod = NULL;
So, use _optional and return any errors you got.
> + } else {
> + val = MT6370_OPA_MODE_MASK | MT6370_OTG_PIN_EN_MASK;
> + ret = regmap_update_bits(priv->regmap, MT6370_REG_CHG_CTRL1,
> + val, val);
> + if (ret)
> + dev_err(priv->dev, "Failed to set otg bits\n");
> + }
...
> + irq_num = platform_get_irq_byname(pdev, irq_name);
> +
Unwanted blank line.
> + if (irq_num < 0) {
> + dev_err(priv->dev, "Failed to get platform resource\n");
Isn't it printed by the call?
> + } else {
> + if (en)
> + enable_irq(irq_num);
> + else
> + disable_irq_nosync(irq_num);
> + }
...
> +toggle_cfo_exit:
The useless label.
> + return ret;
> +}
...
> + ret = mt6370_chg_get_online(priv, val);
> + if (!val->intval) {
No error check?
> + val->intval = POWER_SUPPLY_STATUS_DISCHARGING;
> + return 0;
> + }
...
> +static int mt6370_chg_set_online(struct mt6370_priv *priv,
> + const union power_supply_propval *val)
> +{
> + int attach;
> + u32 pwr_rdy = !!val->intval;
> +
> + mutex_lock(&priv->attach_lock);
> + attach = atomic_read(&priv->attach);
> + if (pwr_rdy == !!attach) {
> + dev_err(priv->dev, "pwr_rdy is same(%d)\n", pwr_rdy);
> + mutex_unlock(&priv->attach_lock);
> + return 0;
> + }
> +
> + atomic_set(&priv->attach, pwr_rdy);
> + mutex_unlock(&priv->attach_lock);
> +
> + if (!queue_work(priv->wq, &priv->bc12_work))
> + dev_err(priv->dev, "bc12 work has already queued\n");
> +
> + return 0;
> +
Unwanted blank line.
> +}
> +static int mt6370_chg_get_property(struct power_supply *psy,
> + enum power_supply_property psp,
> + union power_supply_propval *val)
> +{
> + struct mt6370_priv *priv = power_supply_get_drvdata(psy);
> + int ret = 0;
> +
> + switch (psp) {
> + case POWER_SUPPLY_PROP_ONLINE:
> + ret = mt6370_chg_get_online(priv, val);
> + break;
> + case POWER_SUPPLY_PROP_STATUS:
> + ret = mt6370_chg_get_status(priv, val);
> + break;
> + case POWER_SUPPLY_PROP_CHARGE_TYPE:
> + ret = mt6370_chg_get_charge_type(priv, val);
> + break;
> + case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT:
> + ret = mt6370_chg_get_ichg(priv, val);
> + break;
> + case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX:
> + ret = mt6370_chg_get_max_ichg(priv, val);
> + break;
> + case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE:
> + ret = mt6370_chg_get_cv(priv, val);
> + break;
> + case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX:
> + ret = mt6370_chg_get_max_cv(priv, val);
> + break;
> + case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT:
> + ret = mt6370_chg_get_aicr(priv, val);
> + break;
> + case POWER_SUPPLY_PROP_INPUT_VOLTAGE_LIMIT:
> + ret = mt6370_chg_get_mivr(priv, val);
> + break;
> + case POWER_SUPPLY_PROP_PRECHARGE_CURRENT:
> + ret = mt6370_chg_get_iprechg(priv, val);
> + break;
> + case POWER_SUPPLY_PROP_CHARGE_TERM_CURRENT:
> + ret = mt6370_chg_get_ieoc(priv, val);
> + break;
> + case POWER_SUPPLY_PROP_TYPE:
> + val->intval = priv->psy_desc->type;
> + break;
> + case POWER_SUPPLY_PROP_USB_TYPE:
> + val->intval = priv->psy_usb_type;
> + break;
> + default:
> + ret = -EINVAL;
> + break;
> + }
> +
> + return ret;
In all cases, return directly.
> +}
...
> + switch (psp) {
> + case POWER_SUPPLY_PROP_ONLINE:
> + ret = mt6370_chg_set_online(priv, val);
> + break;
> + case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT:
> + ret = mt6370_chg_set_ichg(priv, val);
> + break;
> + case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE:
> + ret = mt6370_chg_set_cv(priv, val);
> + break;
> + case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT:
> + ret = mt6370_chg_set_aicr(priv, val);
> + break;
> + case POWER_SUPPLY_PROP_INPUT_VOLTAGE_LIMIT:
> + ret = mt6370_chg_set_mivr(priv, val);
> + break;
> + case POWER_SUPPLY_PROP_PRECHARGE_CURRENT:
> + ret = mt6370_chg_set_iprechg(priv, val);
> + break;
> + case POWER_SUPPLY_PROP_CHARGE_TERM_CURRENT:
> + ret = mt6370_chg_set_ieoc(priv, val);
> + break;
> + default:
> + ret = -EINVAL;
> + }
> + return ret;
As per above.
...
> + for (i = 0; i < F_MAX; i++) {
> + priv->rmap_fields[i] = devm_regmap_field_alloc(priv->dev,
> + priv->regmap,
> + fds[i].field);
> + if (IS_ERR(priv->rmap_fields[i])) {
> + dev_err(priv->dev,
> + "Failed to allocate regmap field [%s]\n",
> + fds[i].name);
> + return PTR_ERR(priv->rmap_fields[i]);
return dev_err_probe();
> + }
> + }
...
> + mutex_init(&priv->attach_lock);
> + atomic_set(&priv->attach, 0);
Why not atomic_init() ?
But yeah, usage of it and other locking mechanisms in this driver are
questionable.
...
> + /* ICHG/IEOC Workaroud, ICHG can not be set less than 900mA */
Workaround
...
> + return IS_ERR(priv->rdev) ? PTR_ERR(priv->rdev) : 0;
PTR_ERR_OR_ZERO()
...
> + .of_node = priv->dev->of_node,
dev_of_node() ?
> + };
> +
> + priv->psy_desc = &mt6370_chg_psy_desc;
> + priv->psy_desc->name = dev_name(priv->dev);
> + priv->psy = devm_power_supply_register(priv->dev, priv->psy_desc, &cfg);
> +
> + return IS_ERR(priv->psy) ? PTR_ERR(priv->psy) : 0;
PTR_ERR_OR_ZERO()
> +}
...
> +static irqreturn_t mt6370_attach_i_handler(int irq, void *data)
> +{
> + struct mt6370_priv *priv = data;
> + u32 otg_en;
> + int ret;
> +
> + /* Check in otg mode or not */
> + ret = mt6370_chg_field_get(priv, F_BOOST_STAT, &otg_en);
> + if (ret < 0) {
> + dev_err(priv->dev, "failed to get otg state\n");
> + return IRQ_HANDLED;
Handled error?
> + }
> +
> + if (otg_en)
> + return IRQ_HANDLED;
> + mutex_lock(&priv->attach_lock);
> + atomic_set(&priv->attach, MT6370_ATTACH_STAT_ATTACH_BC12_DONE);
> + mutex_unlock(&priv->attach_lock);
Mutex around atomic?! It's interesting...
> + if (!queue_work(priv->wq, &priv->bc12_work))
> + dev_err(priv->dev, "bc12 work has already queued\n");
> +
> + return IRQ_HANDLED;
> +}
...
> + for (i = 0; i < ARRAY_SIZE(mt6370_chg_irqs); i++) {
> + ret = platform_get_irq_byname(to_platform_device(priv->dev),
> + mt6370_chg_irqs[i].name);
> + if (ret < 0) {
> + dev_err(priv->dev, "Failed to get irq %s\n",
> + mt6370_chg_irqs[i].name);
Isn't the same printed by the above call?
> + return ret;
> + }
> +
> + ret = devm_request_threaded_irq(priv->dev, ret, NULL,
> + mt6370_chg_irqs[i].handler,
> + IRQF_TRIGGER_FALLING,
> + dev_name(priv->dev),
> + priv);
> +
> + if (ret < 0) {
> + dev_err(priv->dev, "Failed to request irq %s\n",
> + mt6370_chg_irqs[i].name);
> + return ret;
return dev_err_probe();
> + }
> + }
...
> +static int mt6370_chg_probe(struct platform_device *pdev)
> +{
Use return dev_err_probe(...); pattern.
> +probe_out:
> + destroy_workqueue(priv->wq);
> + mutex_destroy(&priv->attach_lock);
I don't see clearly the initialization of these in the ->probe().
Besides that, does destroy_workque() synchronize the actual queue(s)?
Mixing devm_ and non-devm_ may lead to a wrong release order that's
why it is better to see allocating and destroying resources in one
function (they may be wrapped, but should be both of them, seems like
you have done it only for the first parts).
> + return ret;
> +}
...
> +static int mt6370_chg_remove(struct platform_device *pdev)
> +{
> + struct mt6370_priv *priv = platform_get_drvdata(pdev);
> +
> + if (priv) {
Can you describe when this condition can be false?
> + mt6370_chg_enable_irq(priv, "mivr", false);
> + cancel_delayed_work_sync(&priv->mivr_dwork);
> + destroy_workqueue(priv->wq);
> + mutex_destroy(&priv->attach_lock);
> + }
> +
> + return 0;
> +}
...
> +static struct platform_driver mt6370_chg_driver = {
> + .probe = mt6370_chg_probe,
> + .remove = mt6370_chg_remove,
> + .driver = {
> + .name = "mt6370-charger",
> + .of_match_table = of_match_ptr(mt6370_chg_of_match),
No good use of of_match_ptr(), please drop it.
> + },
> +};
--
With Best Regards,
Andy Shevchenko
On Fri, Jun 24, 2022 at 8:23 AM Linus Walleij <[email protected]> wrote:
> Thanks for your patch!
>
> On Thu, Jun 23, 2022 at 1:58 PM ChiaEn Wu <[email protected]> wrote:
>
> > From: ChiYuan Huang <[email protected]>
> >
> > Add Mediatek MT6370 current sink type LED Indicator driver.
> >
> > Signed-off-by: ChiYuan Huang <[email protected]>
> (...)
> > drivers/leds/Kconfig | 11 +
> > drivers/leds/Makefile | 1 +
> > drivers/leds/leds-mt6370.c | 989 +++++++++++++++++++++++++++++++++++++++++++++
>
> There is a drivers/leds/flash subdirectory these days, put the driver
> in that directory instead.
Sorry I'm commenting on the wrong patch.
I meant this one. Move that into drivers/leds/flash
drivers/leds/flash/leds-mt6370-flash.c | 657 ++++++++++++
Yours,
Linus Walleij
Hi ChiaEn!
Thanks for your patch!
On Thu, Jun 23, 2022 at 1:58 PM ChiaEn Wu <[email protected]> wrote:
> From: ChiYuan Huang <[email protected]>
>
> Add Mediatek MT6370 current sink type LED Indicator driver.
>
> Signed-off-by: ChiYuan Huang <[email protected]>
(...)
> drivers/leds/Kconfig | 11 +
> drivers/leds/Makefile | 1 +
> drivers/leds/leds-mt6370.c | 989 +++++++++++++++++++++++++++++++++++++++++++++
There is a drivers/leds/flash subdirectory these days, put the driver
in that directory instead.
Yours,
Linus Walleij
Hi Linus,
Thank you for the comment.
Linus Walleij <[email protected]> 於 2022年6月24日 週五 下午2:25寫道：
>
> On Fri, Jun 24, 2022 at 8:23 AM Linus Walleij <[email protected]> wrote:
> > Thanks for your patch!
> >
> > On Thu, Jun 23, 2022 at 1:58 PM ChiaEn Wu <[email protected]> wrote:
> >
> > > From: ChiYuan Huang <[email protected]>
> > >
> > > Add Mediatek MT6370 current sink type LED Indicator driver.
> > >
> > > Signed-off-by: ChiYuan Huang <[email protected]>
> > (...)
> > > drivers/leds/Kconfig | 11 +
> > > drivers/leds/Makefile | 1 +
> > > drivers/leds/leds-mt6370.c | 989 +++++++++++++++++++++++++++++++++++++++++++++
> >
> > There is a drivers/leds/flash subdirectory these days, put the driver
> > in that directory instead.
>
> Sorry I'm commenting on the wrong patch.
>
> I meant this one. Move that into drivers/leds/flash
> drivers/leds/flash/leds-mt6370-flash.c | 657 ++++++++++++
In next version, I'll use "leds: flash: ......" instead of "leds:
flashlight: ......" in subject.
May I confirm that the driver has already in the drivers/leds/flash,
so I don’t have to move it in next version?
Sincerely,
Alice Chen
Hi Joe,
Joe Simmons-Talbott <[email protected]> 於 2022年6月23日 週四 晚上9:17寫道：
>
> On Thu, Jun 23, 2022 at 07:56:22PM +0800, ChiaEn Wu wrote:
> > From: ChiYuan Huang <[email protected]>
> >
> > Add mt6370 backlight binding documentation.
> >
> > Signed-off-by: ChiYuan Huang <[email protected]>
> > ---
> >
> > v3
> > - Rename "mediatek,bled-pwm-hys-input-threshold-steps" to
> > "mediatek,bled-pwm-hys-input-th-steps"
> > - Refine "bled-pwm-hys-input-th-steps", "bled-ovp-microvolt",
> > "bled-ocp-microamp" enum values
> > ---
> > .../leds/backlight/mediatek,mt6370-backlight.yaml | 92 ++++++++++++++++++++++
> > 1 file changed, 92 insertions(+)
> > create mode 100644 Documentation/devicetree/bindings/leds/backlight/mediatek,mt6370-backlight.yaml
> >
> > diff --git a/Documentation/devicetree/bindings/leds/backlight/mediatek,mt6370-backlight.yaml b/Documentation/devicetree/bindings/leds/backlight/mediatek,mt6370-backlight.yaml
> > new file mode 100644
> > index 0000000..26563ae
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/leds/backlight/mediatek,mt6370-backlight.yaml
> > @@ -0,0 +1,92 @@
> > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/leds/backlight/mediatek,mt6370-backlight.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: Mediatek MT6370 Backlight
> > +
> > +maintainers:
> > + - ChiaEn Wu <[email protected]>
> > +
> > +description: |
> > + This module is part of the MT6370 MFD device.
> > + The MT6370 Backlight WLED driver supports up to a 29V output voltage for
> > + 4 channels of 8 series WLEDs. Each channel supports up to 30mA of current
> > + capability with 2048 current steps (11 bits) in exponential or linear
> > + mapping curves.
> > +
> > +allOf:
> > + - $ref: common.yaml#
> > +
> > +properties:
> > + compatible:
> > + const: mediatek,mt6370-backlight
> > +
> > + default-brightness:
> > + minimum: 0
> > + maximum: 2048
> > +
> > + max-brightness:
> > + minimum: 0
> > + maximum: 2048
> > +
> > + enable-gpios:
> > + description: External backlight 'enable' pin
> > + maxItems: 1
> > +
> > + mediatek,bled-pwm-enable:
> > + description: |
> > + Enable external PWM input for backlight dimming
> > + type: boolean
> > +
> > + mediatek,bled-pwm-hys-enable:
> > + description: |
> > + Enable the backlight input-hysteresis for PWM mode
> > + type: boolean
> > +
> > + mediatek,bled-pwm-hys-input-th-steps:
> > + $ref: /schemas/types.yaml#/definitions/uint8
> > + enum: [1, 4, 16, 64]
> > + description: |
> > + The selection of the upper and lower bounds threshold of backlight
> > + PWM resolution. If we choose selection 64, the variation of PWM
> > + resolution needs over than 64 steps.
>
> more than?
>
> Thanks,
> Joe
>
Thanks for your helpful comments!
I will revise this in the next patch. Thanks!
> > +
> > + mediatek,bled-ovp-shutdown:
> > + description: |
> > + Enable the backlight shutdown when OVP level triggered
> > + type: boolean
> > +
> > + mediatek,bled-ovp-microvolt:
> > + enum: [17000000, 21000000, 25000000, 29000000]
> > + description: |
> > + Backlight OVP level selection.
> > +
> > + mediatek,bled-ocp-shutdown:
> > + description: |
> > + Enable the backlight shutdown when OCP level triggerred.
> > + type: boolean
> > +
> > + mediatek,bled-ocp-microamp:
> > + enum: [900000, 1200000, 1500000, 1800000]
> > + description: |
> > + Backlight OC level selection.
> > +
> > + mediatek,bled-channel-use:
> > + $ref: /schemas/types.yaml#/definitions/uint8
> > + description: |
> > + Backlight LED channel to be used.
> > + Each bit mapping to:
> > + - 0: CH4
> > + - 1: CH3
> > + - 2: CH2
> > + - 3: CH1
> > + minimum: 1
> > + maximum: 15
> > +
> > +required:
> > + - compatible
> > + - mediatek,bled-channel-use
> > +
> > +additionalProperties: false
> > --
> > 2.7.4
> >
Best regards,
ChiaEn Wu
Hi Andy,
Thanks for your helpful comments! We have some questions below.
Andy Shevchenko <[email protected]> 於 2022年6月24日 週五 凌晨2:01寫道：
>
> On Thu, Jun 23, 2022 at 1:59 PM ChiaEn Wu <[email protected]> wrote:
> >
> > From: ChiYuan Huang <[email protected]>
> >
> > Add Mediatek MT6370 MFD support.
>
> ...
>
> > +config MFD_MT6370
> > + tristate "Mediatek MT6370 SubPMIC"
> > + select MFD_CORE
> > + select REGMAP_I2C
> > + select REGMAP_IRQ
> > + depends on I2C
> > + help
> > + Say Y here to enable MT6370 SubPMIC functional support.
> > + It consists of a single cell battery charger with ADC monitoring, RGB
> > + LEDs, dual channel flashlight, WLED backlight driver, display bias
> > + voltage supply, one general purpose LDO, and the USB Type-C & PD
> > + controller complies with the latest USB Type-C and PD standards.
>
> What will be the module name in case it's chosen to be built as a module?
OK, we will add related text in the next patch! Thanks!
>
> ...
>
> > obj-$(CONFIG_INTEL_SOC_PMIC_BXTWC) += intel_soc_pmic_bxtwc.o
> > obj-$(CONFIG_INTEL_SOC_PMIC_CHTWC) += intel_soc_pmic_chtwc.o
> > obj-$(CONFIG_INTEL_SOC_PMIC_CHTDC_TI) += intel_soc_pmic_chtdc_ti.o
> > obj-$(CONFIG_MFD_MT6360) += mt6360-core.o
> > +obj-$(CONFIG_MFD_MT6370) += mt6370.o
> > mt6397-objs := mt6397-core.o mt6397-irq.o mt6358-irq.o
> > obj-$(CONFIG_MFD_MT6397) += mt6397.o
> > obj-$(CONFIG_INTEL_SOC_PMIC_MRFLD) += intel_soc_pmic_mrfld.o
>
> This whole bunch of drivers is in the wrong place in Makefile.
>
> https://lore.kernel.org/all/[email protected]/
>
hmm... So shall we need to cherry-pick your this patch first,
then modify the Makefile before the next submission??
> ...
>
> > +#define MT6370_REG_MAXADDR 0x1FF
>
> Wondering if (BIT(10) - 1) gives a better hint on how hardware limits
> this (so it will be clear it's 10-bit address).
well... This "0x1FF" is just a virtual mapping value to map the max
address of the PMU bank(0x1XX).
So, I feel its means is different from using (BIT(10) - 1) here.
>
> ...
>
> > +static int mt6370_check_vendor_info(struct mt6370_info *info)
> > +{
> > + unsigned int devinfo;
> > + int ret;
> > +
> > + ret = regmap_read(info->regmap, MT6370_REG_DEV_INFO, &devinfo);
> > + if (ret)
> > + return ret;
> > +
> > + switch (FIELD_GET(MT6370_VENID_MASK, devinfo)) {
> > + case MT6370_VENID_RT5081:
> > + case MT6370_VENID_RT5081A:
> > + case MT6370_VENID_MT6370:
> > + case MT6370_VENID_MT6371:
> > + case MT6370_VENID_MT6372P:
> > + case MT6370_VENID_MT6372CP:
>
> return 0;
>
> > + break;
> > + default:
> > + dev_err(info->dev, "Unknown Vendor ID 0x%02x\n", devinfo);
> > + return -ENODEV;
> > + }
> > +
> > + return 0;
>
> ...and drop these two lines?
OK! We will refine it in the next patch!
>
> > +}
>
> ...
>
> > + bank_idx = *(u8 *)reg_buf;
> > + bank_addr = *(u8 *)(reg_buf + 1);
>
> Why not
>
> const u8 *u8_buf = reg_buf;
>
> bank_idx = u8_buf[0];
> bank_addr = u8_buf[1];
>
> ?
We will refine it in the next patch! Thanks!
>
> ...
>
> > + if (ret < 0)
> > + return ret;
> > + else if (ret != val_size)
>
> Redundant 'else'.
I'm not quite sure what you mean, so I made the following changes first.
------------------------------------
if (ret < 0)
return ret;
if (ret != val_size)
return -EIO;
------------------------------------
I don't know if it meets your expectations??
>
> > + return -EIO;
>
> ...
>
> > + bank_idx = *(u8 *)data;
> > + bank_addr = *(u8 *)(data + 1);
>
> As per above.
>
> --
> With Best Regards,
> Andy Shevchenko
Best regards,
ChiaEn Wu
Hi Daniel,
Thanks for your comments!
Daniel Thompson <[email protected]> 於 2022年6月23日 週四 晚上9:43寫道：
>
> On Thu, Jun 23, 2022 at 07:56:31PM +0800, ChiaEn Wu wrote:
> > From: ChiaEn Wu <[email protected]>
> >
> > Add Mediatek MT6370 Backlight support.
> >
> > Signed-off-by: ChiaEn Wu <[email protected]>
>
> > diff --git a/drivers/video/backlight/Kconfig b/drivers/video/backlight/Kconfig
> > index a003e02..7cd823d 100644
> > <snip>
> > +static int mt6370_init_backlight_properties(struct mt6370_priv *priv,
> > + struct backlight_properties *props)
> > +{
> > + struct device *dev = priv->dev;
> > + u8 prop_val;
> > + u32 brightness, ovp_uV, ocp_uA;
> > + unsigned int mask, val;
> > + int ret;
> > +
> > + /* Vendor optional properties */
> > + val = 0;
> > + if (device_property_read_bool(dev, "mediatek,bled-pwm-enable"))
> > + val |= MT6370_BL_PWM_EN_MASK;
> > +
> > + if (device_property_read_bool(dev, "mediatek,bled-pwm-hys-enable"))
> > + val |= MT6370_BL_PWM_HYS_EN_MASK;
> > +
> > + ret = device_property_read_u8(dev,
> > + "mediatek,bled-pwm-hys-input-th-steps",
> > + &prop_val);
> > + if (!ret) {
> > + prop_val = clamp_val(prop_val,
> > + MT6370_BL_PWM_HYS_TH_MIN_STEP,
> > + MT6370_BL_PWM_HYS_TH_MAX_STEP);
> > + /*
> > + * prop_val = 1 --> 1 steps --> 0x00
> > + * prop_val = 2 ~ 4 --> 4 steps --> 0x01
> > + * prop_val = 5 ~ 16 --> 16 steps --> 0x10
> > + * prop_val = 17 ~ 64 --> 64 steps --> 0x11
>
> ^^^^^
> These numbers are binary, not hex, right? If so, the comments
> should be 0b00 to 0b03 .
Ohh! Yes! These numbers are binary!
I so apologize for making this mistake...
I will revise the comments in the next patch!
Thank you so much!
>
>
> > + */
> > + prop_val = (ilog2(roundup_pow_of_two(prop_val)) + 1) >> 1;
> > + val |= prop_val << (ffs(MT6370_BL_PWM_HYS_SEL_MASK) - 1);
> > + }
> > +
> > + ret = regmap_update_bits(priv->regmap, MT6370_REG_BL_PWM,
> > + val, val);
> > + if (ret)
> > + return ret;
>
> Overall, I like this approach! Easy to read and understand.
>
>
> > <snip>
> > +static int mt6370_bl_probe(struct platform_device *pdev)
> > +{
> > + struct mt6370_priv *priv;
> > + struct backlight_properties props = {
> > + .type = BACKLIGHT_RAW,
> > + .scale = BACKLIGHT_SCALE_LINEAR,
>
> Sorry, I missed this before but the KConfig comment says that the
> backlight can support both linear and exponential curves.
>
> Is there a good reason to default to linear?
Well...
The customers who used this PMIC have very few or even no use exponential curve,
so I set the default to linear.
If you think this is inappropriate, I will add a DT property to
control this feature in the next patch!
By the way,
I found some mistakes in my probe() function... I didn't use "return"
when I use dev_err_probe()...
I will refine it in the next patch!
>
>
> Daniel.
> >
Best regards,
ChiaEn Wu
Hi Andy,
Thanks for your helpful comments!
Andy Shevchenko <[email protected]> 於 2022年6月24日 週五 凌晨2:19寫道：
>
> On Thu, Jun 23, 2022 at 2:00 PM ChiaEn Wu <[email protected]> wrote:
> >
> > From: ChiYuan Huang <[email protected]>
> >
> > Add mt6370 DisplayBias and VibLDO support.
>
> ...
>
> > +#include <linux/bits.h>
> > +#include <linux/gpio/consumer.h>
> > +#include <linux/interrupt.h>
> > +#include <linux/kernel.h>
> > +#include <linux/module.h>
>
> > +#include <linux/of.h>
>
> Any users of this? (See below)
>
> > +#include <linux/platform_device.h>
> > +#include <linux/regmap.h>
> > +#include <linux/regulator/driver.h>
> > +#include <linux/regulator/machine.h>
>
> ...
>
> > +#define MT6370_LDO_MINUV 1600000
> > +#define MT6370_LDO_STPUV 200000
> > +#define MT6370_LDO_N_VOLT 13
> > +#define MT6370_DBVBOOST_MINUV 4000000
> > +#define MT6370_DBVBOOST_STPUV 50000
> > +#define MT6370_DBVBOOST_N_VOLT 45
> > +#define MT6370_DBVOUT_MINUV 4000000
> > +#define MT6370_DBVOUT_STPUV 50000
> > +#define MT6370_DBVOUT_N_VOLT 41
>
> If UV is a unit suffix, make it _UV.
>
> ...
>
> > + .of_match = of_match_ptr("dsvbst"),
>
> Would it even be called / used if CONFIG_OF=n?
We got a notification from Mark telling us that this patch has been
applied to git.
( https://lore.kernel.org/linux-arm-kernel/[email protected]/
)
So, should we need to make any other changes in the next submission?
>
> ...
>
> > + .regulators_node = of_match_ptr("regulators"),
>
> Ditto.
>
> ...
>
> > + for (i = 0; i < ARRAY_SIZE(mt6370_irqs); i++) {
> > + irq = platform_get_irq_byname(pdev, mt6370_irqs[i].name);
> > +
> > + rdev = priv->rdev[mt6370_irqs[i].rid];
> > +
> > + ret = devm_request_threaded_irq(priv->dev, irq, NULL,
> > + mt6370_irqs[i].handler, 0,
> > + mt6370_irqs[i].name, rdev);
> > + if (ret) {
>
> > + dev_err(priv->dev,
> > + "Failed to register (%d) interrupt\n", i);
> > + return ret;
>
> return dev_err_probe(...); ?
>
> > + }
> > + }
>
> ...
>
> > + for (i = 0; i < MT6370_MAX_IDX; i++) {
> > + rdev = devm_regulator_register(priv->dev,
> > + mt6370_regulator_descs + i,
> > + &cfg);
> > + if (IS_ERR(rdev)) {
>
> > + dev_err(priv->dev,
> > + "Failed to register (%d) regulator\n", i);
> > + return PTR_ERR(rdev);
>
> return dev_err_probe(...); ?
>
> > + }
> > +
> > + priv->rdev[i] = rdev;
> > + }
>
> ...
>
> > + if (!priv->regmap) {
> > + dev_err(&pdev->dev, "Failed to init regmap\n");
> > + return -ENODEV;
> > + }
>
> return dev_err_probe(...);
>
> --
> With Best Regards,
> Andy Shevchenko
Best regards,
ChiaEn Wu
On 23/06/2022 13:56, ChiaEn Wu wrote:
> From: ChiYuan Huang <[email protected]>
>
> Add Mediatek mt6370 current sink type LED indicator binding documentation.
>
> Signed-off-by: ChiYuan Huang <[email protected]>
> ---
>
> v3
> - Use leds-class-multicolor.yaml instead of common.yaml.
> - Split multi-led and led node.
> - Add subdevice "led" in "multi-led".
> ---
> .../bindings/leds/mediatek,mt6370-indicator.yaml | 77 ++++++++++++++++++++++
> 1 file changed, 77 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/leds/mediatek,mt6370-indicator.yaml
>
> diff --git a/Documentation/devicetree/bindings/leds/mediatek,mt6370-indicator.yaml b/Documentation/devicetree/bindings/leds/mediatek,mt6370-indicator.yaml
> new file mode 100644
> index 0000000..45030f3
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/leds/mediatek,mt6370-indicator.yaml
> @@ -0,0 +1,77 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/leds/mediatek,mt6370-indicator.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: LED driver for MT6370 PMIC from MediaTek Integrated.
> +
> +maintainers:
> + - Alice Chen <[email protected]>
> +
> +description: |
> + This module is part of the MT6370 MFD device.
> + Add MT6370 LED driver include 4-channel RGB LED support Register/PWM/Breath Mode
> +
> +allOf:
> + - $ref: leds-class-multicolor.yaml#
> +
> +properties:
> + compatible:
> + const: mediatek,mt6370-indicator
> +
> + "#address-cells":
> + const: 1
> +
> + "#size-cells":
> + const: 0
> +
> +patternProperties:
> + "^multi-led@[0-3]$":
> + type: object
Here as well unevaluatedProperties:false (on the type level)
> +
> + properties:
> + reg:
> + enum: [0, 1, 2, 3]
> +
> + "#address-cells":
> + const: 1
> +
> + "#size-cells":
> + const: 0
> +
> + patternProperties:
> + "^led@[0-2]$":
> + type: object
> + $ref: common.yaml#
> + unevaluatedProperties: false
> +
> + required:
> + - reg
> + - color
> +
> + required:
> + - reg
> + - color
> + - "#address-cells"
> + - "#size-cells"
> +
> + "^led@[0-3]$":
> + type: object
> + $ref: common.yaml#
> + unevaluatedProperties: false
> +
> + properties:
> + reg:
> + enum: [0, 1, 2, 3]
> +
> + required:
> + - reg
> + - color
> +
> +required:
> + - compatible
> + - "#address-cells"
> + - "#size-cells"
> +
> +additionalProperties: false
Best regards,
Krzysztof
On 23/06/2022 13:56, ChiaEn Wu wrote:
> From: ChiaEn Wu <[email protected]>
>
> Add Mediatek MT6370 Charger binding documentation.
>
> Signed-off-by: ChiaEn Wu <[email protected]>
> ---
>
> v3
> - Add items and remove maxItems of io-channels
> - Add io-channel-names and describe each item
> - Add "unevaluatedProperties: false" in "usb-otg-vbus-regulator"
> - Rename "enable-gpio" to "enable-gpios" in "usb-otg-vbus-regulator"
> ---
> .../power/supply/mediatek,mt6370-charger.yaml | 87 ++++++++++++++++++++++
> 1 file changed, 87 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/power/supply/mediatek,mt6370-charger.yaml
>
> diff --git a/Documentation/devicetree/bindings/power/supply/mediatek,mt6370-charger.yaml b/Documentation/devicetree/bindings/power/supply/mediatek,mt6370-charger.yaml
> new file mode 100644
> index 0000000..f138db6
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/power/supply/mediatek,mt6370-charger.yaml
> @@ -0,0 +1,87 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/power/supply/mediatek,mt6370-charger.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Mediatek MT6370 Battery Charger
> +
> +maintainers:
> + - ChiaEn Wu <[email protected]>
> +
> +description: |
> + This module is part of the MT6370 MFD device.
> + Provides Battery Charger, Boost for OTG devices and BC1.2 detection.
> +
> +properties:
> + compatible:
> + const: mediatek,mt6370-charger
> +
> + interrupts:
> + description: |
> + Specify what irqs are needed to be handled by MT6370 Charger driver. IRQ
> + "MT6370_IRQ_CHG_MIVR", "MT6370_IRQ_ATTACH" and "MT6370_IRQ_OVPCTRL_UVP_D"
> + are required.
> + items:
> + - description: BC1.2 done irq
> + - description: usb plug in irq
> + - description: mivr irq
> +
> + interrupt-names:
> + items:
> + - const: attach_i
> + - const: uvp_d_evt
> + - const: mivr
> +
> + io-channels:
> + description: |
> + Use ADC channel to read VBUS, IBUS, IBAT, etc., info.
> + minItems: 1
> + items:
> + - description: |
> + VBUS voltage with lower accuracy (+-75mV) but higher measure
> + range (1~22V)
> + - description: |
> + VBUS voltage with higher accuracy (+-30mV) but lower measure
> + range (1~9.76V)
> + - description: the main system input voltage
> + - description: battery voltage
> + - description: battery temperature-sense input voltage
> + - description: IBUS current (required)
> + - description: battery current
> + - description: |
> + regulated output voltage to supply for the PWM low-side gate driver
> + and the bootstrap capacitor
> + - description: IC junction temperature
> +
> + io-channel-names:
It does not match io-channels, you need minItems here as well.
> + items:
> + - const: vbusdiv5
> + - const: vbusdiv2
> + - const: vsys
> + - const: vbat
> + - const: ts_bat
> + - const: ibus
> + - const: ibat
> + - const: chg_vddp
> + - const: temp_jc
> +
Best regards,
Krzysztof
On 24/06/2022 12:35, Krzysztof Kozlowski wrote:
> On 23/06/2022 13:56, ChiaEn Wu wrote:
>> From: ChiYuan Huang <[email protected]>
>>
>> Add Mediatek mt6370 current sink type LED indicator binding documentation.
>>
>> Signed-off-by: ChiYuan Huang <[email protected]>
>> ---
>>
>> v3
>> - Use leds-class-multicolor.yaml instead of common.yaml.
>> - Split multi-led and led node.
>> - Add subdevice "led" in "multi-led".
>> ---
>> .../bindings/leds/mediatek,mt6370-indicator.yaml | 77 ++++++++++++++++++++++
>> 1 file changed, 77 insertions(+)
>> create mode 100644 Documentation/devicetree/bindings/leds/mediatek,mt6370-indicator.yaml
>>
>> diff --git a/Documentation/devicetree/bindings/leds/mediatek,mt6370-indicator.yaml b/Documentation/devicetree/bindings/leds/mediatek,mt6370-indicator.yaml
>> new file mode 100644
>> index 0000000..45030f3
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/leds/mediatek,mt6370-indicator.yaml
>> @@ -0,0 +1,77 @@
>> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
>> +%YAML 1.2
>> +---
>> +$id: http://devicetree.org/schemas/leds/mediatek,mt6370-indicator.yaml#
>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>> +
>> +title: LED driver for MT6370 PMIC from MediaTek Integrated.
>> +
>> +maintainers:
>> + - Alice Chen <[email protected]>
>> +
>> +description: |
>> + This module is part of the MT6370 MFD device.
>> + Add MT6370 LED driver include 4-channel RGB LED support Register/PWM/Breath Mode
>> +
>> +allOf:
>> + - $ref: leds-class-multicolor.yaml#
>> +
>> +properties:
>> + compatible:
>> + const: mediatek,mt6370-indicator
>> +
>> + "#address-cells":
>> + const: 1
>> +
>> + "#size-cells":
>> + const: 0
>> +
>> +patternProperties:
>> + "^multi-led@[0-3]$":
>> + type: object
>
> Here as well unevaluatedProperties:false (on the type level)
Ah, no, it does not work currently. Your code looks good.
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Best regards,
Krzysztof
On 23/06/2022 13:56, ChiaEn Wu wrote:
> From: Alice Chen <[email protected]>
>
> Add Mediatek MT6370 flashlight binding documentation.
>
> Signed-off-by: Alice Chen <[email protected]>
> ---
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Best regards,
Krzysztof
On 23/06/2022 13:56, ChiaEn Wu wrote:
> From: ChiYuan Huang <[email protected]>
>
> Add Mediatek MT6370 binding documentation.
>
> Signed-off-by: ChiYuan Huang <[email protected]>
> ---
>
> v3
> - Use " in entire patchset
> - Refine ADC description
> - Rename "enable-gpio" to "enable-gpios" in "regualtor"
> - Change "/schemas/" to "../" in every reference of all MT6370 modules
> ---
> .../devicetree/bindings/mfd/mediatek,mt6370.yaml | 280 +++++++++++++++++++++
> include/dt-bindings/iio/adc/mediatek,mt6370_adc.h | 18 ++
> 2 files changed, 298 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/mfd/mediatek,mt6370.yaml
> create mode 100644 include/dt-bindings/iio/adc/mediatek,mt6370_adc.h
>
> diff --git a/Documentation/devicetree/bindings/mfd/mediatek,mt6370.yaml b/Documentation/devicetree/bindings/mfd/mediatek,mt6370.yaml
> new file mode 100644
> index 0000000..fa9da13
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mfd/mediatek,mt6370.yaml
> @@ -0,0 +1,280 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/mfd/mediatek,mt6370.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Mediatek MT6370 SubPMIC
> +
> +maintainers:
> + - ChiYuan Huang <[email protected]>
> +
> +description: |
> + MT6370 is a highly-integrated smart power management IC, which includes a
> + single cell Li-Ion/Li-Polymer switching battery charger, a USB Type-C &
> + Power Delivery (PD) controller, dual flash LED current sources, a RGB LED
> + driver, a backlight WLED driver, a display bias driver and a general LDO for
> + portable devices.
> +
> +properties:
> + compatible:
> + const: mediatek,mt6370
> +
> + reg:
> + maxItems: 1
> +
> + wakeup-source: true
> +
> + interrupts:
> + maxItems: 1
> +
> + interrupt-controller: true
> +
> + "#interrupt-cells":
> + const: 1
> +
> + adc:
> + type: object
> + description: |
> + Provides 9 channels for system monitoring, including VBUSDIV5 (lower
> + accuracy, higher measure range), VBUSDIV2 (higher accuracy, lower
> + measure range), VBAT, VSYS, CHG_VDDP, TS_BAT, IBUS, IBAT, and TEMP_JC.
> +
> + properties:
> + compatible:
> + const: mediatek,mt6370-adc
> +
> + "#io-channel-cells":
> + const: 1
> +
> + required:
> + - compatible
> + - "#io-channel-cells"
> +
> + backlight:
> + type: object
> + $ref: ../leds/backlight/mediatek,mt6370-backlight.yaml#
This was correct before: /schemas/leds/ ....
Same in other places.
Best regards,
Krzysztof
On Thu, Jun 23, 2022 at 07:56:25PM +0800, ChiaEn Wu wrote:
> --- /dev/null
> +++ b/drivers/usb/typec/tcpm/tcpci_mt6370.c
> @@ -0,0 +1,212 @@
> +// SPDX-License-Identifier: GPL-2.0+
Are you sure you mean "+" here?
I have to ask, sorry.
And no copyright line? Your company is ok with that, nice! :)
thanks,
greg k-h
On Fri, Jun 24, 2022 at 9:20 AM szuni chen <[email protected]> wrote:
> > I meant this one. Move that into drivers/leds/flash
> > drivers/leds/flash/leds-mt6370-flash.c | 657 ++++++++++++
>
> In next version, I'll use "leds: flash: ......" instead of "leds:
> flashlight: ......" in subject.
> May I confirm that the driver has already in the drivers/leds/flash,
> so I don’t have to move it in next version?
Yeah you're right, I am just writing wrong comments today, it is already
correct. Sorry!
Yours,
Linus Walleij
On Fri, Jun 24, 2022 at 12:19 PM ChiaEn Wu <[email protected]> wrote:
> Andy Shevchenko <[email protected]> 於 2022年6月24日 週五 凌晨2:01寫道：
> > On Thu, Jun 23, 2022 at 1:59 PM ChiaEn Wu <[email protected]> wrote:
...
> > > obj-$(CONFIG_INTEL_SOC_PMIC_BXTWC) += intel_soc_pmic_bxtwc.o
> > > obj-$(CONFIG_INTEL_SOC_PMIC_CHTWC) += intel_soc_pmic_chtwc.o
> > > obj-$(CONFIG_INTEL_SOC_PMIC_CHTDC_TI) += intel_soc_pmic_chtdc_ti.o
> > > obj-$(CONFIG_MFD_MT6360) += mt6360-core.o
> > > +obj-$(CONFIG_MFD_MT6370) += mt6370.o
> > > mt6397-objs := mt6397-core.o mt6397-irq.o mt6358-irq.o
> > > obj-$(CONFIG_MFD_MT6397) += mt6397.o
> > > obj-$(CONFIG_INTEL_SOC_PMIC_MRFLD) += intel_soc_pmic_mrfld.o
> >
> > This whole bunch of drivers is in the wrong place in Makefile.
> >
> > https://lore.kernel.org/all/[email protected]/
>
> hmm... So shall we need to cherry-pick your this patch first,
> then modify the Makefile before the next submission??
I don't know what Lee's preferences are, but at least I have these
options in mind:
1) wait until Lee applies my series;
2) take that single patch to your tree as a precursor.
In the second case you will need to send the series with that patch as well.
...
> > > +#define MT6370_REG_MAXADDR 0x1FF
> >
> > Wondering if (BIT(10) - 1) gives a better hint on how hardware limits
> > this (so it will be clear it's 10-bit address).
>
> well... This "0x1FF" is just a virtual mapping value to map the max
> address of the PMU bank(0x1XX).
> So, I feel its means is different from using (BIT(10) - 1) here.
Perhaps a comment then?
...
> > > + if (ret < 0)
> > > + return ret;
> > > + else if (ret != val_size)
> >
> > Redundant 'else'.
>
> I'm not quite sure what you mean, so I made the following changes first.
> ------------------------------------
> if (ret < 0)
> return ret;
> if (ret != val_size)
> return -EIO;
> ------------------------------------
> I don't know if it meets your expectations??
Yes.
> > > + return -EIO;
--
With Best Regards,
Andy Shevchenko
On Fri, Jun 24, 2022 at 12:33 PM ChiaEn Wu <[email protected]> wrote:
> Andy Shevchenko <[email protected]> 於 2022年6月24日 週五 凌晨2:19寫道：
> > On Thu, Jun 23, 2022 at 2:00 PM ChiaEn Wu <[email protected]> wrote:
...
> We got a notification from Mark telling us that this patch has been
> applied to git.
> ( https://lore.kernel.org/linux-arm-kernel/[email protected]/
> )
> So, should we need to make any other changes in the next submission?
You may do the followup(s) to address all or some of the comments
depending on the case (e.g. good to clean up code with dev_err_probe()
use).
--
With Best Regards,
Andy Shevchenko
Hi Andy,
Sorry for the late reply, I have some questions to ask you below. Thanks!
Andy Shevchenko <[email protected]> 於 2022年6月24日 週五 凌晨2:56寫道：
>
> On Thu, Jun 23, 2022 at 2:00 PM ChiaEn Wu <[email protected]> wrote:
> >
> > From: ChiaEn Wu <[email protected]>
> >
> > Add Mediatek MT6370 charger driver.
>
> ...
>
> > +config CHARGER_MT6370
> > + tristate "Mediatek MT6370 Charger Driver"
> > + depends on MFD_MT6370
> > + depends on REGULATOR
> > + select LINEAR_RANGES
> > + help
> > + Say Y here to enable MT6370 Charger Part.
> > + The device supports High-Accuracy Voltage/Current Regulation,
> > + Average Input Current Regulation, Battery Temperature Sensing,
> > + Over-Temperature Protection, DPDM Detection for BC1.2.
>
> Module name?
>
> ...
>
> > +#include <dt-bindings/iio/adc/mediatek,mt6370_adc.h>
>
> This usually goes after linux/*
>
> > +#include <linux/atomic.h>
> > +#include <linux/bitfield.h>
> > +#include <linux/bits.h>
> > +#include <linux/gpio/consumer.h>
> > +#include <linux/iio/consumer.h>
> > +#include <linux/init.h>
> > +#include <linux/interrupt.h>
> > +#include <linux/kernel.h>
> > +#include <linux/module.h>
>
> > +#include <linux/of.h>
>
>
> > +#include <linux/platform_device.h>
> > +#include <linux/power_supply.h>
> > +#include <linux/regmap.h>
> > +#include <linux/regulator/driver.h>
> > +#include <linux/workqueue.h>
>
> ...
>
> > +#define MT6370_MIVR_IBUS_TH 100000 /* 100 mA */
>
> Instead of comment, add proper units.
>
> ...
>
> > + MT6370_USB_STAT_DCP,
> > + MT6370_USB_STAT_CDP,
> > + MT6370_USB_STAT_MAX,
>
> No comma for a terminator line.
>
> ...
>
> > +static inline u32 mt6370_chg_val_to_reg(const struct mt6370_chg_range *range,
> > + u32 val)
> > +static inline u32 mt6370_chg_reg_to_val(const struct mt6370_chg_range *range,
> > + u8 reg)
>
> I'm wondering if you can use the
> https://elixir.bootlin.com/linux/v5.19-rc3/source/include/linux/linear_range.h
> APIs.
Thanks for your helpful comments!
I will refine it in the next patch!
>
> ...
>
> > + int ret = 0;
>
> This seems a redundant assignment, see below.
>
> > + rcfg->ena_gpiod = fwnode_gpiod_get_index(of_fwnode_handle(of),
> > + "enable", 0,
>
> For index == 0 don't use _index API.
>
> > + GPIOD_OUT_LOW |
> > + GPIOD_FLAGS_BIT_NONEXCLUSIVE,
> > + rdesc->name);
> > + if (IS_ERR(rcfg->ena_gpiod)) {
> > + dev_err(priv->dev, "Failed to requeset OTG EN Pin\n");
>
> request
>
> > + rcfg->ena_gpiod = NULL;
>
> So, use _optional and return any errors you got.
These days, I tried to use various APIs in <gpio/consumer.h>, and also
try to use _optional APIs.
But my OTG regulator node is a child node of the charger node, like below.
----------------------------------------------------------------------------
// copy-paste from our mfd dt-binding example
charger {
compatible = "mediatek,mt6370-charger";
interrupts = <48>, <68>, <6>;
interrupt-names = "attach_i", "uvp_d_evt", "mivr";
io-channels = <&mt6370_adc MT6370_CHAN_IBUS>;
mt6370_otg_vbus: usb-otg-vbus-regulator {
regulator-name = "mt6370-usb-otg-vbus";
regulator-min-microvolt = <4350000>;
regulator-max-microvolt = <5800000>;
regulator-min-microamp = <500000>;
regulator-max-microamp = <3000000>;
};
};
----------------------------------------------------------------------------
Hence, if I use _optional APIs, it will always get NULL.
And, If I use 'gpiod_get_from_of_node' here, this API will only parse
the 'enable' property, not 'enable-gpio' or 'enable-gpios', we need to
add the '-gpio' suffix before we use this API.
Only 'fwnode_gpiod_get_index' can match this case. Although fwnode
parsing is not preferred, 'of_parse_cb' already can guarantee the
callback will only be used by the regulator of_node parsing.
>
> > + } else {
> > + val = MT6370_OPA_MODE_MASK | MT6370_OTG_PIN_EN_MASK;
> > + ret = regmap_update_bits(priv->regmap, MT6370_REG_CHG_CTRL1,
> > + val, val);
> > + if (ret)
> > + dev_err(priv->dev, "Failed to set otg bits\n");
> > + }
>
> ...
>
> > + irq_num = platform_get_irq_byname(pdev, irq_name);
>
> > +
>
> Unwanted blank line.
>
> > + if (irq_num < 0) {
>
> > + dev_err(priv->dev, "Failed to get platform resource\n");
>
> Isn't it printed by the call?
>
> > + } else {
> > + if (en)
> > + enable_irq(irq_num);
> > + else
> > + disable_irq_nosync(irq_num);
> > + }
>
> ...
>
> > +toggle_cfo_exit:
>
> The useless label.
>
> > + return ret;
> > +}
>
> ...
>
> > + ret = mt6370_chg_get_online(priv, val);
> > + if (!val->intval) {
>
> No error check?
I replace "mt6370_chg_get_online()" with "power_supply_get_property()"
and add some error check.
Could it meet your expectations??
>
> > + val->intval = POWER_SUPPLY_STATUS_DISCHARGING;
> > + return 0;
> > + }
>
> ...
>
> > +static int mt6370_chg_set_online(struct mt6370_priv *priv,
> > + const union power_supply_propval *val)
> > +{
> > + int attach;
> > + u32 pwr_rdy = !!val->intval;
> > +
> > + mutex_lock(&priv->attach_lock);
> > + attach = atomic_read(&priv->attach);
> > + if (pwr_rdy == !!attach) {
> > + dev_err(priv->dev, "pwr_rdy is same(%d)\n", pwr_rdy);
> > + mutex_unlock(&priv->attach_lock);
> > + return 0;
> > + }
> > +
> > + atomic_set(&priv->attach, pwr_rdy);
> > + mutex_unlock(&priv->attach_lock);
> > +
> > + if (!queue_work(priv->wq, &priv->bc12_work))
> > + dev_err(priv->dev, "bc12 work has already queued\n");
> > +
> > + return 0;
>
> > +
>
> Unwanted blank line.
>
> > +}
>
> > +static int mt6370_chg_get_property(struct power_supply *psy,
> > + enum power_supply_property psp,
> > + union power_supply_propval *val)
> > +{
> > + struct mt6370_priv *priv = power_supply_get_drvdata(psy);
> > + int ret = 0;
> > +
> > + switch (psp) {
> > + case POWER_SUPPLY_PROP_ONLINE:
> > + ret = mt6370_chg_get_online(priv, val);
> > + break;
> > + case POWER_SUPPLY_PROP_STATUS:
> > + ret = mt6370_chg_get_status(priv, val);
> > + break;
> > + case POWER_SUPPLY_PROP_CHARGE_TYPE:
> > + ret = mt6370_chg_get_charge_type(priv, val);
> > + break;
> > + case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT:
> > + ret = mt6370_chg_get_ichg(priv, val);
> > + break;
> > + case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX:
> > + ret = mt6370_chg_get_max_ichg(priv, val);
> > + break;
> > + case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE:
> > + ret = mt6370_chg_get_cv(priv, val);
> > + break;
> > + case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX:
> > + ret = mt6370_chg_get_max_cv(priv, val);
> > + break;
> > + case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT:
> > + ret = mt6370_chg_get_aicr(priv, val);
> > + break;
> > + case POWER_SUPPLY_PROP_INPUT_VOLTAGE_LIMIT:
> > + ret = mt6370_chg_get_mivr(priv, val);
> > + break;
> > + case POWER_SUPPLY_PROP_PRECHARGE_CURRENT:
> > + ret = mt6370_chg_get_iprechg(priv, val);
> > + break;
> > + case POWER_SUPPLY_PROP_CHARGE_TERM_CURRENT:
> > + ret = mt6370_chg_get_ieoc(priv, val);
> > + break;
> > + case POWER_SUPPLY_PROP_TYPE:
> > + val->intval = priv->psy_desc->type;
> > + break;
> > + case POWER_SUPPLY_PROP_USB_TYPE:
> > + val->intval = priv->psy_usb_type;
> > + break;
> > + default:
> > + ret = -EINVAL;
> > + break;
> > + }
> > +
> > + return ret;
>
> In all cases, return directly.
>
> > +}
>
> ...
>
> > + switch (psp) {
> > + case POWER_SUPPLY_PROP_ONLINE:
> > + ret = mt6370_chg_set_online(priv, val);
> > + break;
> > + case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT:
> > + ret = mt6370_chg_set_ichg(priv, val);
> > + break;
> > + case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE:
> > + ret = mt6370_chg_set_cv(priv, val);
> > + break;
> > + case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT:
> > + ret = mt6370_chg_set_aicr(priv, val);
> > + break;
> > + case POWER_SUPPLY_PROP_INPUT_VOLTAGE_LIMIT:
> > + ret = mt6370_chg_set_mivr(priv, val);
> > + break;
> > + case POWER_SUPPLY_PROP_PRECHARGE_CURRENT:
> > + ret = mt6370_chg_set_iprechg(priv, val);
> > + break;
> > + case POWER_SUPPLY_PROP_CHARGE_TERM_CURRENT:
> > + ret = mt6370_chg_set_ieoc(priv, val);
> > + break;
> > + default:
> > + ret = -EINVAL;
> > + }
> > + return ret;
>
> As per above.
>
> ...
>
> > + for (i = 0; i < F_MAX; i++) {
> > + priv->rmap_fields[i] = devm_regmap_field_alloc(priv->dev,
> > + priv->regmap,
> > + fds[i].field);
> > + if (IS_ERR(priv->rmap_fields[i])) {
> > + dev_err(priv->dev,
> > + "Failed to allocate regmap field [%s]\n",
> > + fds[i].name);
> > + return PTR_ERR(priv->rmap_fields[i]);
>
> return dev_err_probe();
>
> > + }
> > + }
>
> ...
>
> > + mutex_init(&priv->attach_lock);
> > + atomic_set(&priv->attach, 0);
>
> Why not atomic_init() ?
> But yeah, usage of it and other locking mechanisms in this driver are
> questionable.
I will refine it in the next patch!
>
> ...
>
> > + /* ICHG/IEOC Workaroud, ICHG can not be set less than 900mA */
>
> Workaround
>
> ...
>
> > + return IS_ERR(priv->rdev) ? PTR_ERR(priv->rdev) : 0;
>
> PTR_ERR_OR_ZERO()
>
> ...
>
> > + .of_node = priv->dev->of_node,
>
> dev_of_node() ?
>
> > + };
> > +
> > + priv->psy_desc = &mt6370_chg_psy_desc;
> > + priv->psy_desc->name = dev_name(priv->dev);
> > + priv->psy = devm_power_supply_register(priv->dev, priv->psy_desc, &cfg);
> > +
> > + return IS_ERR(priv->psy) ? PTR_ERR(priv->psy) : 0;
>
> PTR_ERR_OR_ZERO()
>
> > +}
>
> ...
>
> > +static irqreturn_t mt6370_attach_i_handler(int irq, void *data)
> > +{
> > + struct mt6370_priv *priv = data;
> > + u32 otg_en;
> > + int ret;
> > +
> > + /* Check in otg mode or not */
> > + ret = mt6370_chg_field_get(priv, F_BOOST_STAT, &otg_en);
> > + if (ret < 0) {
> > + dev_err(priv->dev, "failed to get otg state\n");
> > + return IRQ_HANDLED;
>
> Handled error?
>
> > + }
> > +
> > + if (otg_en)
> > + return IRQ_HANDLED;
>
> > + mutex_lock(&priv->attach_lock);
> > + atomic_set(&priv->attach, MT6370_ATTACH_STAT_ATTACH_BC12_DONE);
> > + mutex_unlock(&priv->attach_lock);
>
> Mutex around atomic?! It's interesting...
I will revise it in the next patch.
>
> > + if (!queue_work(priv->wq, &priv->bc12_work))
> > + dev_err(priv->dev, "bc12 work has already queued\n");
> > +
> > + return IRQ_HANDLED;
> > +}
>
> ...
>
> > + for (i = 0; i < ARRAY_SIZE(mt6370_chg_irqs); i++) {
> > + ret = platform_get_irq_byname(to_platform_device(priv->dev),
> > + mt6370_chg_irqs[i].name);
> > + if (ret < 0) {
> > + dev_err(priv->dev, "Failed to get irq %s\n",
> > + mt6370_chg_irqs[i].name);
>
> Isn't the same printed by the above call?
well... yes they are similar, I will remove one of them in the next patch.
>
> > + return ret;
> > + }
> > +
> > + ret = devm_request_threaded_irq(priv->dev, ret, NULL,
> > + mt6370_chg_irqs[i].handler,
> > + IRQF_TRIGGER_FALLING,
> > + dev_name(priv->dev),
> > + priv);
> > +
> > + if (ret < 0) {
> > + dev_err(priv->dev, "Failed to request irq %s\n",
> > + mt6370_chg_irqs[i].name);
> > + return ret;
>
> return dev_err_probe();
>
> > + }
> > + }
>
> ...
>
> > +static int mt6370_chg_probe(struct platform_device *pdev)
> > +{
>
>
> Use return dev_err_probe(...); pattern.
>
> > +probe_out:
> > + destroy_workqueue(priv->wq);
> > + mutex_destroy(&priv->attach_lock);
>
> I don't see clearly the initialization of these in the ->probe().
> Besides that, does destroy_workque() synchronize the actual queue(s)?
>
> Mixing devm_ and non-devm_ may lead to a wrong release order that's
> why it is better to see allocating and destroying resources in one
> function (they may be wrapped, but should be both of them, seems like
> you have done it only for the first parts).
OK, I will try to revise these in the next patch!
>
> > + return ret;
> > +}
>
> ...
>
> > +static int mt6370_chg_remove(struct platform_device *pdev)
> > +{
> > + struct mt6370_priv *priv = platform_get_drvdata(pdev);
> > +
> > + if (priv) {
>
> Can you describe when this condition can be false?
well... I will remove it in the next patch, sorry for making this
stupid mistake...
>
> > + mt6370_chg_enable_irq(priv, "mivr", false);
> > + cancel_delayed_work_sync(&priv->mivr_dwork);
> > + destroy_workqueue(priv->wq);
> > + mutex_destroy(&priv->attach_lock);
> > + }
> > +
> > + return 0;
> > +}
>
> ...
>
> > +static struct platform_driver mt6370_chg_driver = {
> > + .probe = mt6370_chg_probe,
> > + .remove = mt6370_chg_remove,
> > + .driver = {
> > + .name = "mt6370-charger",
> > + .of_match_table = of_match_ptr(mt6370_chg_of_match),
>
> No good use of of_match_ptr(), please drop it.
>
> > + },
> > +};
>
> --
> With Best Regards,
> Andy Shevchenko
Thanks for your review!
Best regards,
ChiaEn Wu
On Thu, 23 Jun 2022 19:56:22 +0800, ChiaEn Wu wrote:
> From: ChiYuan Huang <[email protected]>
>
> Add mt6370 backlight binding documentation.
>
> Signed-off-by: ChiYuan Huang <[email protected]>
> ---
>
> v3
> - Rename "mediatek,bled-pwm-hys-input-threshold-steps" to
> "mediatek,bled-pwm-hys-input-th-steps"
> - Refine "bled-pwm-hys-input-th-steps", "bled-ovp-microvolt",
> "bled-ocp-microamp" enum values
> ---
> .../leds/backlight/mediatek,mt6370-backlight.yaml | 92 ++++++++++++++++++++++
> 1 file changed, 92 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/leds/backlight/mediatek,mt6370-backlight.yaml
>
Reviewed-by: Rob Herring <[email protected]>
On Thu, 23 Jun 2022, ChiaEn Wu wrote:
> From: ChiYuan Huang <[email protected]>
>
> Add Mediatek MT6370 MFD support.
No such thing as "MFD support".
And you're not getting away with submitting a 370 line patch with a 5
word change log either. :)
Please at least tell us what the device is and what it's used for.
> Signed-off-by: ChiYuan Huang <[email protected]>
> ---
>
> v3
> - Refine Kconfig help text
> - Refine error message of unknown vendor ID in
> mt6370_check_vendor_info()
> - Refine return value handling of mt6370_regmap_read()
> - Refine all probe error by using dev_err_probe()
> - Refine "bank_idx" and "bank_addr" in mt6370_regmap_read() and
> mt6370_regmap_write()
> - Add "#define VENID*" and drop the comments in
> mt6370_check_vendor_info()
> - Drop "MFD" in MODULE_DESCRIPTION()
> ---
> drivers/mfd/Kconfig | 13 ++
> drivers/mfd/Makefile | 1 +
> drivers/mfd/mt6370.c | 358 +++++++++++++++++++++++++++++++++++++++++++++++++++
> 3 files changed, 372 insertions(+)
> create mode 100644 drivers/mfd/mt6370.c
>
> diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
> index 3b59456..4c900c4 100644
> --- a/drivers/mfd/Kconfig
> +++ b/drivers/mfd/Kconfig
> @@ -937,6 +937,19 @@ config MFD_MT6360
> PMIC part includes 2-channel BUCKs and 2-channel LDOs
> LDO part includes 4-channel LDOs
>
> +config MFD_MT6370
> + tristate "Mediatek MT6370 SubPMIC"
> + select MFD_CORE
> + select REGMAP_I2C
> + select REGMAP_IRQ
> + depends on I2C
> + help
> + Say Y here to enable MT6370 SubPMIC functional support.
> + It consists of a single cell battery charger with ADC monitoring, RGB
> + LEDs, dual channel flashlight, WLED backlight driver, display bias
> + voltage supply, one general purpose LDO, and the USB Type-C & PD
> + controller complies with the latest USB Type-C and PD standards.
> +
> config MFD_MT6397
> tristate "MediaTek MT6397 PMIC Support"
> select MFD_CORE
> diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
> index 858cacf..62b2712 100644
> --- a/drivers/mfd/Makefile
> +++ b/drivers/mfd/Makefile
> @@ -242,6 +242,7 @@ obj-$(CONFIG_INTEL_SOC_PMIC_BXTWC) += intel_soc_pmic_bxtwc.o
> obj-$(CONFIG_INTEL_SOC_PMIC_CHTWC) += intel_soc_pmic_chtwc.o
> obj-$(CONFIG_INTEL_SOC_PMIC_CHTDC_TI) += intel_soc_pmic_chtdc_ti.o
> obj-$(CONFIG_MFD_MT6360) += mt6360-core.o
> +obj-$(CONFIG_MFD_MT6370) += mt6370.o
> mt6397-objs := mt6397-core.o mt6397-irq.o mt6358-irq.o
> obj-$(CONFIG_MFD_MT6397) += mt6397.o
> obj-$(CONFIG_INTEL_SOC_PMIC_MRFLD) += intel_soc_pmic_mrfld.o
> diff --git a/drivers/mfd/mt6370.c b/drivers/mfd/mt6370.c
> new file mode 100644
> index 0000000..49f02b1
> --- /dev/null
> +++ b/drivers/mfd/mt6370.c
> @@ -0,0 +1,358 @@
> +// SPDX-License-Identifier: GPL-2.0
No Copyright?
> +#include <linux/bits.h>
> +#include <linux/i2c.h>
> +#include <linux/interrupt.h>
> +#include <linux/kernel.h>
> +#include <linux/mfd/core.h>
> +#include <linux/module.h>
> +#include <linux/regmap.h>
> +
> +enum {
> + MT6370_USBC_I2C = 0,
> + MT6370_PMU_I2C,
> + MT6370_MAX_I2C
> +};
> +
> +#define MT6370_REG_DEV_INFO 0x100
> +#define MT6370_REG_CHG_IRQ1 0x1C0
> +#define MT6370_REG_CHG_MASK1 0x1E0
> +
> +#define MT6370_VENID_MASK GENMASK(7, 4)
> +
> +#define MT6370_NUM_IRQREGS 16
> +#define MT6370_USBC_I2CADDR 0x4E
> +#define MT6370_REG_ADDRLEN 2
> +#define MT6370_REG_MAXADDR 0x1FF
> +
> +#define MT6370_VENID_RT5081 0x8
> +#define MT6370_VENID_RT5081A 0xA
> +#define MT6370_VENID_MT6370 0xE
> +#define MT6370_VENID_MT6371 0xF
> +#define MT6370_VENID_MT6372P 0x9
> +#define MT6370_VENID_MT6372CP 0xB
> +
> +/* IRQ definitions */
> +#define MT6370_IRQ_DIRCHGON 0
> +#define MT6370_IRQ_CHG_TREG 4
> +#define MT6370_IRQ_CHG_AICR 5
> +#define MT6370_IRQ_CHG_MIVR 6
> +#define MT6370_IRQ_PWR_RDY 7
> +#define MT6370_IRQ_FL_CHG_VINOVP 11
> +#define MT6370_IRQ_CHG_VSYSUV 12
> +#define MT6370_IRQ_CHG_VSYSOV 13
> +#define MT6370_IRQ_CHG_VBATOV 14
> +#define MT6370_IRQ_CHG_VINOVPCHG 15
> +#define MT6370_IRQ_TS_BAT_COLD 20
> +#define MT6370_IRQ_TS_BAT_COOL 21
> +#define MT6370_IRQ_TS_BAT_WARM 22
> +#define MT6370_IRQ_TS_BAT_HOT 23
> +#define MT6370_IRQ_TS_STATC 24
> +#define MT6370_IRQ_CHG_FAULT 25
> +#define MT6370_IRQ_CHG_STATC 26
> +#define MT6370_IRQ_CHG_TMR 27
> +#define MT6370_IRQ_CHG_BATABS 28
> +#define MT6370_IRQ_CHG_ADPBAD 29
> +#define MT6370_IRQ_CHG_RVP 30
> +#define MT6370_IRQ_TSHUTDOWN 31
> +#define MT6370_IRQ_CHG_IINMEAS 32
> +#define MT6370_IRQ_CHG_ICCMEAS 33
> +#define MT6370_IRQ_CHGDET_DONE 34
> +#define MT6370_IRQ_WDTMR 35
> +#define MT6370_IRQ_SSFINISH 36
> +#define MT6370_IRQ_CHG_RECHG 37
> +#define MT6370_IRQ_CHG_TERM 38
> +#define MT6370_IRQ_CHG_IEOC 39
> +#define MT6370_IRQ_ADC_DONE 40
> +#define MT6370_IRQ_PUMPX_DONE 41
> +#define MT6370_IRQ_BST_BATUV 45
> +#define MT6370_IRQ_BST_MIDOV 46
> +#define MT6370_IRQ_BST_OLP 47
> +#define MT6370_IRQ_ATTACH 48
> +#define MT6370_IRQ_DETACH 49
> +#define MT6370_IRQ_HVDCP_STPDONE 51
> +#define MT6370_IRQ_HVDCP_VBUSDET_DONE 52
> +#define MT6370_IRQ_HVDCP_DET 53
> +#define MT6370_IRQ_CHGDET 54
> +#define MT6370_IRQ_DCDT 55
> +#define MT6370_IRQ_DIRCHG_VGOK 59
> +#define MT6370_IRQ_DIRCHG_WDTMR 60
> +#define MT6370_IRQ_DIRCHG_UC 61
> +#define MT6370_IRQ_DIRCHG_OC 62
> +#define MT6370_IRQ_DIRCHG_OV 63
> +#define MT6370_IRQ_OVPCTRL_SWON 67
> +#define MT6370_IRQ_OVPCTRL_UVP_D 68
> +#define MT6370_IRQ_OVPCTRL_UVP 69
> +#define MT6370_IRQ_OVPCTRL_OVP_D 70
> +#define MT6370_IRQ_OVPCTRL_OVP 71
> +#define MT6370_IRQ_FLED_STRBPIN 72
> +#define MT6370_IRQ_FLED_TORPIN 73
> +#define MT6370_IRQ_FLED_TX 74
> +#define MT6370_IRQ_FLED_LVF 75
> +#define MT6370_IRQ_FLED2_SHORT 78
> +#define MT6370_IRQ_FLED1_SHORT 79
> +#define MT6370_IRQ_FLED2_STRB 80
> +#define MT6370_IRQ_FLED1_STRB 81
> +#define mT6370_IRQ_FLED2_STRB_TO 82
> +#define MT6370_IRQ_FLED1_STRB_TO 83
> +#define MT6370_IRQ_FLED2_TOR 84
> +#define MT6370_IRQ_FLED1_TOR 85
> +#define MT6370_IRQ_OTP 93
> +#define MT6370_IRQ_VDDA_OVP 94
> +#define MT6370_IRQ_VDDA_UV 95
> +#define MT6370_IRQ_LDO_OC 103
> +#define MT6370_IRQ_BLED_OCP 118
> +#define MT6370_IRQ_BLED_OVP 119
> +#define MT6370_IRQ_DSV_VNEG_OCP 123
> +#define MT6370_IRQ_DSV_VPOS_OCP 124
> +#define MT6370_IRQ_DSV_BST_OCP 125
> +#define MT6370_IRQ_DSV_VNEG_SCP 126
> +#define MT6370_IRQ_DSV_VPOS_SCP 127
Can you pop these into a header file please?
> +struct mt6370_info {
> + struct i2c_client *i2c[MT6370_MAX_I2C];
> + struct device *dev;
You don't need both 'i2c' and 'dev'.
You can derive one from the other.
> + struct regmap *regmap;
> + struct regmap_irq_chip_data *irq_data;
> +};
This can do into the header file too.
> +static const struct regmap_irq mt6370_irqs[] = {
> + REGMAP_IRQ_REG_LINE(MT6370_IRQ_DIRCHGON, 8),
> + REGMAP_IRQ_REG_LINE(MT6370_IRQ_CHG_TREG, 8),
> + REGMAP_IRQ_REG_LINE(MT6370_IRQ_CHG_AICR, 8),
> + REGMAP_IRQ_REG_LINE(MT6370_IRQ_CHG_MIVR, 8),
> + REGMAP_IRQ_REG_LINE(MT6370_IRQ_PWR_RDY, 8),
> + REGMAP_IRQ_REG_LINE(MT6370_IRQ_FL_CHG_VINOVP, 8),
> + REGMAP_IRQ_REG_LINE(MT6370_IRQ_CHG_VSYSUV, 8),
> + REGMAP_IRQ_REG_LINE(MT6370_IRQ_CHG_VSYSOV, 8),
> + REGMAP_IRQ_REG_LINE(MT6370_IRQ_CHG_VBATOV, 8),
> + REGMAP_IRQ_REG_LINE(MT6370_IRQ_CHG_VINOVPCHG, 8),
> + REGMAP_IRQ_REG_LINE(MT6370_IRQ_TS_BAT_COLD, 8),
> + REGMAP_IRQ_REG_LINE(MT6370_IRQ_TS_BAT_COOL, 8),
> + REGMAP_IRQ_REG_LINE(MT6370_IRQ_TS_BAT_WARM, 8),
> + REGMAP_IRQ_REG_LINE(MT6370_IRQ_TS_BAT_HOT, 8),
> + REGMAP_IRQ_REG_LINE(MT6370_IRQ_TS_STATC, 8),
> + REGMAP_IRQ_REG_LINE(MT6370_IRQ_CHG_FAULT, 8),
> + REGMAP_IRQ_REG_LINE(MT6370_IRQ_CHG_STATC, 8),
> + REGMAP_IRQ_REG_LINE(MT6370_IRQ_CHG_TMR, 8),
> + REGMAP_IRQ_REG_LINE(MT6370_IRQ_CHG_BATABS, 8),
> + REGMAP_IRQ_REG_LINE(MT6370_IRQ_CHG_ADPBAD, 8),
> + REGMAP_IRQ_REG_LINE(MT6370_IRQ_CHG_RVP, 8),
> + REGMAP_IRQ_REG_LINE(MT6370_IRQ_TSHUTDOWN, 8),
> + REGMAP_IRQ_REG_LINE(MT6370_IRQ_CHG_IINMEAS, 8),
> + REGMAP_IRQ_REG_LINE(MT6370_IRQ_CHG_ICCMEAS, 8),
> + REGMAP_IRQ_REG_LINE(MT6370_IRQ_CHGDET_DONE, 8),
> + REGMAP_IRQ_REG_LINE(MT6370_IRQ_WDTMR, 8),
> + REGMAP_IRQ_REG_LINE(MT6370_IRQ_SSFINISH, 8),
> + REGMAP_IRQ_REG_LINE(MT6370_IRQ_CHG_RECHG, 8),
> + REGMAP_IRQ_REG_LINE(MT6370_IRQ_CHG_TERM, 8),
> + REGMAP_IRQ_REG_LINE(MT6370_IRQ_CHG_IEOC, 8),
> + REGMAP_IRQ_REG_LINE(MT6370_IRQ_ADC_DONE, 8),
> + REGMAP_IRQ_REG_LINE(MT6370_IRQ_PUMPX_DONE, 8),
> + REGMAP_IRQ_REG_LINE(MT6370_IRQ_BST_BATUV, 8),
> + REGMAP_IRQ_REG_LINE(MT6370_IRQ_BST_MIDOV, 8),
> + REGMAP_IRQ_REG_LINE(MT6370_IRQ_BST_OLP, 8),
> + REGMAP_IRQ_REG_LINE(MT6370_IRQ_ATTACH, 8),
> + REGMAP_IRQ_REG_LINE(MT6370_IRQ_DETACH, 8),
> + REGMAP_IRQ_REG_LINE(MT6370_IRQ_HVDCP_STPDONE, 8),
> + REGMAP_IRQ_REG_LINE(MT6370_IRQ_HVDCP_VBUSDET_DONE, 8),
> + REGMAP_IRQ_REG_LINE(MT6370_IRQ_HVDCP_DET, 8),
> + REGMAP_IRQ_REG_LINE(MT6370_IRQ_CHGDET, 8),
> + REGMAP_IRQ_REG_LINE(MT6370_IRQ_DCDT, 8),
> + REGMAP_IRQ_REG_LINE(MT6370_IRQ_DIRCHG_VGOK, 8),
> + REGMAP_IRQ_REG_LINE(MT6370_IRQ_DIRCHG_WDTMR, 8),
> + REGMAP_IRQ_REG_LINE(MT6370_IRQ_DIRCHG_UC, 8),
> + REGMAP_IRQ_REG_LINE(MT6370_IRQ_DIRCHG_OC, 8),
> + REGMAP_IRQ_REG_LINE(MT6370_IRQ_DIRCHG_OV, 8),
> + REGMAP_IRQ_REG_LINE(MT6370_IRQ_OVPCTRL_SWON, 8),
> + REGMAP_IRQ_REG_LINE(MT6370_IRQ_OVPCTRL_UVP_D, 8),
> + REGMAP_IRQ_REG_LINE(MT6370_IRQ_OVPCTRL_UVP, 8),
> + REGMAP_IRQ_REG_LINE(MT6370_IRQ_OVPCTRL_OVP_D, 8),
> + REGMAP_IRQ_REG_LINE(MT6370_IRQ_OVPCTRL_OVP, 8),
> + REGMAP_IRQ_REG_LINE(MT6370_IRQ_FLED_STRBPIN, 8),
> + REGMAP_IRQ_REG_LINE(MT6370_IRQ_FLED_TORPIN, 8),
> + REGMAP_IRQ_REG_LINE(MT6370_IRQ_FLED_TX, 8),
> + REGMAP_IRQ_REG_LINE(MT6370_IRQ_FLED_LVF, 8),
> + REGMAP_IRQ_REG_LINE(MT6370_IRQ_FLED2_SHORT, 8),
> + REGMAP_IRQ_REG_LINE(MT6370_IRQ_FLED1_SHORT, 8),
> + REGMAP_IRQ_REG_LINE(MT6370_IRQ_FLED2_STRB, 8),
> + REGMAP_IRQ_REG_LINE(MT6370_IRQ_FLED1_STRB, 8),
> + REGMAP_IRQ_REG_LINE(mT6370_IRQ_FLED2_STRB_TO, 8),
> + REGMAP_IRQ_REG_LINE(MT6370_IRQ_FLED1_STRB_TO, 8),
> + REGMAP_IRQ_REG_LINE(MT6370_IRQ_FLED2_TOR, 8),
> + REGMAP_IRQ_REG_LINE(MT6370_IRQ_FLED1_TOR, 8),
> + REGMAP_IRQ_REG_LINE(MT6370_IRQ_OTP, 8),
> + REGMAP_IRQ_REG_LINE(MT6370_IRQ_VDDA_OVP, 8),
> + REGMAP_IRQ_REG_LINE(MT6370_IRQ_VDDA_UV, 8),
> + REGMAP_IRQ_REG_LINE(MT6370_IRQ_LDO_OC, 8),
> + REGMAP_IRQ_REG_LINE(MT6370_IRQ_BLED_OCP, 8),
> + REGMAP_IRQ_REG_LINE(MT6370_IRQ_BLED_OVP, 8),
> + REGMAP_IRQ_REG_LINE(MT6370_IRQ_DSV_VNEG_OCP, 8),
> + REGMAP_IRQ_REG_LINE(MT6370_IRQ_DSV_VPOS_OCP, 8),
> + REGMAP_IRQ_REG_LINE(MT6370_IRQ_DSV_BST_OCP, 8),
> + REGMAP_IRQ_REG_LINE(MT6370_IRQ_DSV_VNEG_SCP, 8),
> + REGMAP_IRQ_REG_LINE(MT6370_IRQ_DSV_VPOS_SCP, 8)
> +};
> +
> +static const struct regmap_irq_chip mt6370_irq_chip = {
> + .name = "mt6370-irqs",
> + .status_base = MT6370_REG_CHG_IRQ1,
> + .mask_base = MT6370_REG_CHG_MASK1,
> + .num_regs = MT6370_NUM_IRQREGS,
> + .irqs = mt6370_irqs,
> + .num_irqs = ARRAY_SIZE(mt6370_irqs),
> +};
> +
> +static const struct resource mt6370_regulator_irqs[] = {
> + DEFINE_RES_IRQ_NAMED(MT6370_IRQ_DSV_VPOS_SCP, "db_vpos_scp"),
> + DEFINE_RES_IRQ_NAMED(MT6370_IRQ_DSV_VNEG_SCP, "db_vneg_scp"),
> + DEFINE_RES_IRQ_NAMED(MT6370_IRQ_DSV_BST_OCP, "db_vbst_ocp"),
> + DEFINE_RES_IRQ_NAMED(MT6370_IRQ_DSV_VPOS_OCP, "db_vpos_ocp"),
> + DEFINE_RES_IRQ_NAMED(MT6370_IRQ_DSV_VNEG_OCP, "db_vneg_ocp"),
> + DEFINE_RES_IRQ_NAMED(MT6370_IRQ_LDO_OC, "ldo_oc")
> +};
> +
> +static const struct mfd_cell mt6370_devices[] = {
> + MFD_CELL_OF("adc", NULL, NULL, 0, 0, "mediatek,mt6370-adc"),
> + MFD_CELL_OF("charger", NULL, NULL, 0, 0, "mediatek,mt6370-charger"),
> + MFD_CELL_OF("backlight", NULL, NULL, 0, 0, "mediatek,mt6370-backlight"),
> + MFD_CELL_OF("flashlight", NULL, NULL, 0, 0, "mediatek,mt6370-flashlight"),
> + MFD_CELL_OF("indicator", NULL, NULL, 0, 0, "mediatek,mt6370-indicator"),
> + MFD_CELL_OF("tcpc", NULL, NULL, 0, 0, "mediatek,mt6370-tcpc"),
> + MFD_CELL_RES("regulator", mt6370_regulator_irqs)
The first parameters here should be prepended with something, perhaps
"mt6370_"?
> +};
> +
> +static int mt6370_check_vendor_info(struct mt6370_info *info)
> +{
> + unsigned int devinfo;
> + int ret;
> +
> + ret = regmap_read(info->regmap, MT6370_REG_DEV_INFO, &devinfo);
> + if (ret)
> + return ret;
> +
> + switch (FIELD_GET(MT6370_VENID_MASK, devinfo)) {
> + case MT6370_VENID_RT5081:
> + case MT6370_VENID_RT5081A:
> + case MT6370_VENID_MT6370:
> + case MT6370_VENID_MT6371:
> + case MT6370_VENID_MT6372P:
> + case MT6370_VENID_MT6372CP:
> + break;
> + default:
> + dev_err(info->dev, "Unknown Vendor ID 0x%02x\n", devinfo);
> + return -ENODEV;
> + }
> +
> + return 0;
> +}
> +
> +static int mt6370_regmap_read(void *context, const void *reg_buf,
> + size_t reg_size, void *val_buf, size_t val_size)
> +{
> + struct mt6370_info *info = context;
> + u8 bank_idx, bank_addr;
> + int ret;
> +
> + bank_idx = *(u8 *)reg_buf;
> + bank_addr = *(u8 *)(reg_buf + 1);
> +
> + ret = i2c_smbus_read_i2c_block_data(info->i2c[bank_idx], bank_addr,
> + val_size, val_buf);
> + if (ret < 0)
> + return ret;
> + else if (ret != val_size)
> + return -EIO;
> +
> + return 0;
> +}
> +
> +static int mt6370_regmap_write(void *context, const void *data, size_t count)
> +{
> + struct mt6370_info *info = context;
> + u8 bank_idx, bank_addr;
> + int len = count - MT6370_REG_ADDRLEN;
> +
> + bank_idx = *(u8 *)data;
> + bank_addr = *(u8 *)(data + 1);
> +
> + return i2c_smbus_write_i2c_block_data(info->i2c[bank_idx], bank_addr,
> + len, data + MT6370_REG_ADDRLEN);
> +}
> +
> +static const struct regmap_bus mt6370_regmap_bus = {
> + .read = mt6370_regmap_read,
> + .write = mt6370_regmap_write,
> +};
> +
> +static const struct regmap_config mt6370_regmap_config = {
> + .reg_bits = 16,
> + .val_bits = 8,
> + .reg_format_endian = REGMAP_ENDIAN_BIG,
> + .max_register = MT6370_REG_MAXADDR,
> +};
> +
> +static int mt6370_probe(struct i2c_client *i2c)
> +{
> + struct mt6370_info *info;
> + struct i2c_client *usbc_i2c;
> + int ret;
> +
> + info = devm_kzalloc(&i2c->dev, sizeof(*info), GFP_KERNEL);
> + if (!info)
> + return -ENOMEM;
> +
> + info->dev = &i2c->dev;
> +
> + usbc_i2c = devm_i2c_new_dummy_device(&i2c->dev, i2c->adapter,
> + MT6370_USBC_I2CADDR);
> + if (IS_ERR(usbc_i2c))
> + return dev_err_probe(&i2c->dev, PTR_ERR(usbc_i2c),
> + "Failed to register USBC I2C client\n");
> +
> + /* Assign I2C client for PMU and TypeC */
> + info->i2c[MT6370_PMU_I2C] = i2c;
> + info->i2c[MT6370_USBC_I2C] = usbc_i2c;
> +
> + info->regmap = devm_regmap_init(&i2c->dev, &mt6370_regmap_bus, info,
> + &mt6370_regmap_config);
Apart from in mt6370_check_vendor_info() where is this actually used?
> + if (IS_ERR(info->regmap))
> + return dev_err_probe(&i2c->dev, PTR_ERR(info->regmap),
> + "Failed to register regmap\n");
> +
> + ret = mt6370_check_vendor_info(info);
> + if (ret)
> + return dev_err_probe(&i2c->dev, ret,
> + "Failed to check vendor info\n");
> +
> + ret = devm_regmap_add_irq_chip(&i2c->dev, info->regmap, i2c->irq,
> + IRQF_ONESHOT, -1, &mt6370_irq_chip,
> + &info->irq_data);
> + if (ret)
> + return dev_err_probe(&i2c->dev, ret,
> + "Failed to add irq chip\n");
> +
> + return devm_mfd_add_devices(&i2c->dev, PLATFORM_DEVID_AUTO,
> + mt6370_devices, ARRAY_SIZE(mt6370_devices),
> + NULL, 0,
> + regmap_irq_get_domain(info->irq_data));
> +}
> +
> +static const struct of_device_id mt6370_match_table[] = {
> + { .compatible = "mediatek,mt6370", },
> + {}
> +};
> +MODULE_DEVICE_TABLE(of, mt6370_match_table);
> +
> +static struct i2c_driver mt6370_driver = {
> + .driver = {
> + .name = "mt6370",
> + .of_match_table = mt6370_match_table,
> + },
> + .probe_new = mt6370_probe,
> +};
> +module_i2c_driver(mt6370_driver);
> +
> +MODULE_AUTHOR("ChiYuan Huang <[email protected]>");
> +MODULE_DESCRIPTION("MT6370 I2C Driver");
This is not an I2C driver.
> +MODULE_LICENSE("GPL v2");
--
Lee Jones [李琼斯]
Principal Technical Lead - Developer Services
Linaro.org │ Open source software for Arm SoCs
Follow Linaro: Facebook | Twitter | Blog
Hi Lee,
Thanks for your reply.
Lee Jones <[email protected]> 於 2022年7月12日 週二 晚上11:29寫道：
>
> On Thu, 23 Jun 2022, ChiaEn Wu wrote:
>
> > From: ChiYuan Huang <[email protected]>
> >
> > Add Mediatek MT6370 MFD support.
>
> No such thing as "MFD support".
>
> And you're not getting away with submitting a 370 line patch with a 5
> word change log either. :)
>
> Please at least tell us what the device is and what it's used for.
I sincerely apologize.
We will add more descriptions of the MT6370 feature in the v5 patch.
>
> > Signed-off-by: ChiYuan Huang <[email protected]>
> > ---
> >
> > v3
> > - Refine Kconfig help text
> > - Refine error message of unknown vendor ID in
> > mt6370_check_vendor_info()
> > - Refine return value handling of mt6370_regmap_read()
> > - Refine all probe error by using dev_err_probe()
> > - Refine "bank_idx" and "bank_addr" in mt6370_regmap_read() and
> > mt6370_regmap_write()
> > - Add "#define VENID*" and drop the comments in
> > mt6370_check_vendor_info()
> > - Drop "MFD" in MODULE_DESCRIPTION()
> > ---
> > drivers/mfd/Kconfig | 13 ++
> > drivers/mfd/Makefile | 1 +
> > drivers/mfd/mt6370.c | 358 +++++++++++++++++++++++++++++++++++++++++++++++++++
> > 3 files changed, 372 insertions(+)
> > create mode 100644 drivers/mfd/mt6370.c
> >
> > diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
> > index 3b59456..4c900c4 100644
> > --- a/drivers/mfd/Kconfig
> > +++ b/drivers/mfd/Kconfig
> > @@ -937,6 +937,19 @@ config MFD_MT6360
> > PMIC part includes 2-channel BUCKs and 2-channel LDOs
> > LDO part includes 4-channel LDOs
> >
> > +config MFD_MT6370
> > + tristate "Mediatek MT6370 SubPMIC"
> > + select MFD_CORE
> > + select REGMAP_I2C
> > + select REGMAP_IRQ
> > + depends on I2C
> > + help
> > + Say Y here to enable MT6370 SubPMIC functional support.
> > + It consists of a single cell battery charger with ADC monitoring, RGB
> > + LEDs, dual channel flashlight, WLED backlight driver, display bias
> > + voltage supply, one general purpose LDO, and the USB Type-C & PD
> > + controller complies with the latest USB Type-C and PD standards.
> > +
> > config MFD_MT6397
> > tristate "MediaTek MT6397 PMIC Support"
> > select MFD_CORE
> > diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
> > index 858cacf..62b2712 100644
> > --- a/drivers/mfd/Makefile
> > +++ b/drivers/mfd/Makefile
> > @@ -242,6 +242,7 @@ obj-$(CONFIG_INTEL_SOC_PMIC_BXTWC) += intel_soc_pmic_bxtwc.o
> > obj-$(CONFIG_INTEL_SOC_PMIC_CHTWC) += intel_soc_pmic_chtwc.o
> > obj-$(CONFIG_INTEL_SOC_PMIC_CHTDC_TI) += intel_soc_pmic_chtdc_ti.o
> > obj-$(CONFIG_MFD_MT6360) += mt6360-core.o
> > +obj-$(CONFIG_MFD_MT6370) += mt6370.o
> > mt6397-objs := mt6397-core.o mt6397-irq.o mt6358-irq.o
> > obj-$(CONFIG_MFD_MT6397) += mt6397.o
> > obj-$(CONFIG_INTEL_SOC_PMIC_MRFLD) += intel_soc_pmic_mrfld.o
> > diff --git a/drivers/mfd/mt6370.c b/drivers/mfd/mt6370.c
> > new file mode 100644
> > index 0000000..49f02b1
> > --- /dev/null
> > +++ b/drivers/mfd/mt6370.c
> > @@ -0,0 +1,358 @@
> > +// SPDX-License-Identifier: GPL-2.0
>
> No Copyright?
We have already added Copyright in the v4 patch.
>
> > +#include <linux/bits.h>
> > +#include <linux/i2c.h>
> > +#include <linux/interrupt.h>
> > +#include <linux/kernel.h>
> > +#include <linux/mfd/core.h>
> > +#include <linux/module.h>
> > +#include <linux/regmap.h>
> > +
> > +enum {
> > + MT6370_USBC_I2C = 0,
> > + MT6370_PMU_I2C,
> > + MT6370_MAX_I2C
> > +};
> > +
> > +#define MT6370_REG_DEV_INFO 0x100
> > +#define MT6370_REG_CHG_IRQ1 0x1C0
> > +#define MT6370_REG_CHG_MASK1 0x1E0
> > +
> > +#define MT6370_VENID_MASK GENMASK(7, 4)
> > +
> > +#define MT6370_NUM_IRQREGS 16
> > +#define MT6370_USBC_I2CADDR 0x4E
> > +#define MT6370_REG_ADDRLEN 2
> > +#define MT6370_REG_MAXADDR 0x1FF
> > +
> > +#define MT6370_VENID_RT5081 0x8
> > +#define MT6370_VENID_RT5081A 0xA
> > +#define MT6370_VENID_MT6370 0xE
> > +#define MT6370_VENID_MT6371 0xF
> > +#define MT6370_VENID_MT6372P 0x9
> > +#define MT6370_VENID_MT6372CP 0xB
> > +
> > +/* IRQ definitions */
> > +#define MT6370_IRQ_DIRCHGON 0
> > +#define MT6370_IRQ_CHG_TREG 4
> > +#define MT6370_IRQ_CHG_AICR 5
> > +#define MT6370_IRQ_CHG_MIVR 6
> > +#define MT6370_IRQ_PWR_RDY 7
> > +#define MT6370_IRQ_FL_CHG_VINOVP 11
> > +#define MT6370_IRQ_CHG_VSYSUV 12
> > +#define MT6370_IRQ_CHG_VSYSOV 13
> > +#define MT6370_IRQ_CHG_VBATOV 14
> > +#define MT6370_IRQ_CHG_VINOVPCHG 15
> > +#define MT6370_IRQ_TS_BAT_COLD 20
> > +#define MT6370_IRQ_TS_BAT_COOL 21
> > +#define MT6370_IRQ_TS_BAT_WARM 22
> > +#define MT6370_IRQ_TS_BAT_HOT 23
> > +#define MT6370_IRQ_TS_STATC 24
> > +#define MT6370_IRQ_CHG_FAULT 25
> > +#define MT6370_IRQ_CHG_STATC 26
> > +#define MT6370_IRQ_CHG_TMR 27
> > +#define MT6370_IRQ_CHG_BATABS 28
> > +#define MT6370_IRQ_CHG_ADPBAD 29
> > +#define MT6370_IRQ_CHG_RVP 30
> > +#define MT6370_IRQ_TSHUTDOWN 31
> > +#define MT6370_IRQ_CHG_IINMEAS 32
> > +#define MT6370_IRQ_CHG_ICCMEAS 33
> > +#define MT6370_IRQ_CHGDET_DONE 34
> > +#define MT6370_IRQ_WDTMR 35
> > +#define MT6370_IRQ_SSFINISH 36
> > +#define MT6370_IRQ_CHG_RECHG 37
> > +#define MT6370_IRQ_CHG_TERM 38
> > +#define MT6370_IRQ_CHG_IEOC 39
> > +#define MT6370_IRQ_ADC_DONE 40
> > +#define MT6370_IRQ_PUMPX_DONE 41
> > +#define MT6370_IRQ_BST_BATUV 45
> > +#define MT6370_IRQ_BST_MIDOV 46
> > +#define MT6370_IRQ_BST_OLP 47
> > +#define MT6370_IRQ_ATTACH 48
> > +#define MT6370_IRQ_DETACH 49
> > +#define MT6370_IRQ_HVDCP_STPDONE 51
> > +#define MT6370_IRQ_HVDCP_VBUSDET_DONE 52
> > +#define MT6370_IRQ_HVDCP_DET 53
> > +#define MT6370_IRQ_CHGDET 54
> > +#define MT6370_IRQ_DCDT 55
> > +#define MT6370_IRQ_DIRCHG_VGOK 59
> > +#define MT6370_IRQ_DIRCHG_WDTMR 60
> > +#define MT6370_IRQ_DIRCHG_UC 61
> > +#define MT6370_IRQ_DIRCHG_OC 62
> > +#define MT6370_IRQ_DIRCHG_OV 63
> > +#define MT6370_IRQ_OVPCTRL_SWON 67
> > +#define MT6370_IRQ_OVPCTRL_UVP_D 68
> > +#define MT6370_IRQ_OVPCTRL_UVP 69
> > +#define MT6370_IRQ_OVPCTRL_OVP_D 70
> > +#define MT6370_IRQ_OVPCTRL_OVP 71
> > +#define MT6370_IRQ_FLED_STRBPIN 72
> > +#define MT6370_IRQ_FLED_TORPIN 73
> > +#define MT6370_IRQ_FLED_TX 74
> > +#define MT6370_IRQ_FLED_LVF 75
> > +#define MT6370_IRQ_FLED2_SHORT 78
> > +#define MT6370_IRQ_FLED1_SHORT 79
> > +#define MT6370_IRQ_FLED2_STRB 80
> > +#define MT6370_IRQ_FLED1_STRB 81
> > +#define mT6370_IRQ_FLED2_STRB_TO 82
> > +#define MT6370_IRQ_FLED1_STRB_TO 83
> > +#define MT6370_IRQ_FLED2_TOR 84
> > +#define MT6370_IRQ_FLED1_TOR 85
> > +#define MT6370_IRQ_OTP 93
> > +#define MT6370_IRQ_VDDA_OVP 94
> > +#define MT6370_IRQ_VDDA_UV 95
> > +#define MT6370_IRQ_LDO_OC 103
> > +#define MT6370_IRQ_BLED_OCP 118
> > +#define MT6370_IRQ_BLED_OVP 119
> > +#define MT6370_IRQ_DSV_VNEG_OCP 123
> > +#define MT6370_IRQ_DSV_VPOS_OCP 124
> > +#define MT6370_IRQ_DSV_BST_OCP 125
> > +#define MT6370_IRQ_DSV_VNEG_SCP 126
> > +#define MT6370_IRQ_DSV_VPOS_SCP 127
>
> Can you pop these into a header file please?
We have already popped them into "mt6370.h" in the v4 patch.
>
> > +struct mt6370_info {
> > + struct i2c_client *i2c[MT6370_MAX_I2C];
> > + struct device *dev;
>
> You don't need both 'i2c' and 'dev'.
>
> You can derive one from the other.
>
> > + struct regmap *regmap;
> > + struct regmap_irq_chip_data *irq_data;
> > +};
>
> This can do into the header file too.
>
> > +static const struct regmap_irq mt6370_irqs[] = {
> > + REGMAP_IRQ_REG_LINE(MT6370_IRQ_DIRCHGON, 8),
> > + REGMAP_IRQ_REG_LINE(MT6370_IRQ_CHG_TREG, 8),
> > + REGMAP_IRQ_REG_LINE(MT6370_IRQ_CHG_AICR, 8),
> > + REGMAP_IRQ_REG_LINE(MT6370_IRQ_CHG_MIVR, 8),
> > + REGMAP_IRQ_REG_LINE(MT6370_IRQ_PWR_RDY, 8),
> > + REGMAP_IRQ_REG_LINE(MT6370_IRQ_FL_CHG_VINOVP, 8),
> > + REGMAP_IRQ_REG_LINE(MT6370_IRQ_CHG_VSYSUV, 8),
> > + REGMAP_IRQ_REG_LINE(MT6370_IRQ_CHG_VSYSOV, 8),
> > + REGMAP_IRQ_REG_LINE(MT6370_IRQ_CHG_VBATOV, 8),
> > + REGMAP_IRQ_REG_LINE(MT6370_IRQ_CHG_VINOVPCHG, 8),
> > + REGMAP_IRQ_REG_LINE(MT6370_IRQ_TS_BAT_COLD, 8),
> > + REGMAP_IRQ_REG_LINE(MT6370_IRQ_TS_BAT_COOL, 8),
> > + REGMAP_IRQ_REG_LINE(MT6370_IRQ_TS_BAT_WARM, 8),
> > + REGMAP_IRQ_REG_LINE(MT6370_IRQ_TS_BAT_HOT, 8),
> > + REGMAP_IRQ_REG_LINE(MT6370_IRQ_TS_STATC, 8),
> > + REGMAP_IRQ_REG_LINE(MT6370_IRQ_CHG_FAULT, 8),
> > + REGMAP_IRQ_REG_LINE(MT6370_IRQ_CHG_STATC, 8),
> > + REGMAP_IRQ_REG_LINE(MT6370_IRQ_CHG_TMR, 8),
> > + REGMAP_IRQ_REG_LINE(MT6370_IRQ_CHG_BATABS, 8),
> > + REGMAP_IRQ_REG_LINE(MT6370_IRQ_CHG_ADPBAD, 8),
> > + REGMAP_IRQ_REG_LINE(MT6370_IRQ_CHG_RVP, 8),
> > + REGMAP_IRQ_REG_LINE(MT6370_IRQ_TSHUTDOWN, 8),
> > + REGMAP_IRQ_REG_LINE(MT6370_IRQ_CHG_IINMEAS, 8),
> > + REGMAP_IRQ_REG_LINE(MT6370_IRQ_CHG_ICCMEAS, 8),
> > + REGMAP_IRQ_REG_LINE(MT6370_IRQ_CHGDET_DONE, 8),
> > + REGMAP_IRQ_REG_LINE(MT6370_IRQ_WDTMR, 8),
> > + REGMAP_IRQ_REG_LINE(MT6370_IRQ_SSFINISH, 8),
> > + REGMAP_IRQ_REG_LINE(MT6370_IRQ_CHG_RECHG, 8),
> > + REGMAP_IRQ_REG_LINE(MT6370_IRQ_CHG_TERM, 8),
> > + REGMAP_IRQ_REG_LINE(MT6370_IRQ_CHG_IEOC, 8),
> > + REGMAP_IRQ_REG_LINE(MT6370_IRQ_ADC_DONE, 8),
> > + REGMAP_IRQ_REG_LINE(MT6370_IRQ_PUMPX_DONE, 8),
> > + REGMAP_IRQ_REG_LINE(MT6370_IRQ_BST_BATUV, 8),
> > + REGMAP_IRQ_REG_LINE(MT6370_IRQ_BST_MIDOV, 8),
> > + REGMAP_IRQ_REG_LINE(MT6370_IRQ_BST_OLP, 8),
> > + REGMAP_IRQ_REG_LINE(MT6370_IRQ_ATTACH, 8),
> > + REGMAP_IRQ_REG_LINE(MT6370_IRQ_DETACH, 8),
> > + REGMAP_IRQ_REG_LINE(MT6370_IRQ_HVDCP_STPDONE, 8),
> > + REGMAP_IRQ_REG_LINE(MT6370_IRQ_HVDCP_VBUSDET_DONE, 8),
> > + REGMAP_IRQ_REG_LINE(MT6370_IRQ_HVDCP_DET, 8),
> > + REGMAP_IRQ_REG_LINE(MT6370_IRQ_CHGDET, 8),
> > + REGMAP_IRQ_REG_LINE(MT6370_IRQ_DCDT, 8),
> > + REGMAP_IRQ_REG_LINE(MT6370_IRQ_DIRCHG_VGOK, 8),
> > + REGMAP_IRQ_REG_LINE(MT6370_IRQ_DIRCHG_WDTMR, 8),
> > + REGMAP_IRQ_REG_LINE(MT6370_IRQ_DIRCHG_UC, 8),
> > + REGMAP_IRQ_REG_LINE(MT6370_IRQ_DIRCHG_OC, 8),
> > + REGMAP_IRQ_REG_LINE(MT6370_IRQ_DIRCHG_OV, 8),
> > + REGMAP_IRQ_REG_LINE(MT6370_IRQ_OVPCTRL_SWON, 8),
> > + REGMAP_IRQ_REG_LINE(MT6370_IRQ_OVPCTRL_UVP_D, 8),
> > + REGMAP_IRQ_REG_LINE(MT6370_IRQ_OVPCTRL_UVP, 8),
> > + REGMAP_IRQ_REG_LINE(MT6370_IRQ_OVPCTRL_OVP_D, 8),
> > + REGMAP_IRQ_REG_LINE(MT6370_IRQ_OVPCTRL_OVP, 8),
> > + REGMAP_IRQ_REG_LINE(MT6370_IRQ_FLED_STRBPIN, 8),
> > + REGMAP_IRQ_REG_LINE(MT6370_IRQ_FLED_TORPIN, 8),
> > + REGMAP_IRQ_REG_LINE(MT6370_IRQ_FLED_TX, 8),
> > + REGMAP_IRQ_REG_LINE(MT6370_IRQ_FLED_LVF, 8),
> > + REGMAP_IRQ_REG_LINE(MT6370_IRQ_FLED2_SHORT, 8),
> > + REGMAP_IRQ_REG_LINE(MT6370_IRQ_FLED1_SHORT, 8),
> > + REGMAP_IRQ_REG_LINE(MT6370_IRQ_FLED2_STRB, 8),
> > + REGMAP_IRQ_REG_LINE(MT6370_IRQ_FLED1_STRB, 8),
> > + REGMAP_IRQ_REG_LINE(mT6370_IRQ_FLED2_STRB_TO, 8),
> > + REGMAP_IRQ_REG_LINE(MT6370_IRQ_FLED1_STRB_TO, 8),
> > + REGMAP_IRQ_REG_LINE(MT6370_IRQ_FLED2_TOR, 8),
> > + REGMAP_IRQ_REG_LINE(MT6370_IRQ_FLED1_TOR, 8),
> > + REGMAP_IRQ_REG_LINE(MT6370_IRQ_OTP, 8),
> > + REGMAP_IRQ_REG_LINE(MT6370_IRQ_VDDA_OVP, 8),
> > + REGMAP_IRQ_REG_LINE(MT6370_IRQ_VDDA_UV, 8),
> > + REGMAP_IRQ_REG_LINE(MT6370_IRQ_LDO_OC, 8),
> > + REGMAP_IRQ_REG_LINE(MT6370_IRQ_BLED_OCP, 8),
> > + REGMAP_IRQ_REG_LINE(MT6370_IRQ_BLED_OVP, 8),
> > + REGMAP_IRQ_REG_LINE(MT6370_IRQ_DSV_VNEG_OCP, 8),
> > + REGMAP_IRQ_REG_LINE(MT6370_IRQ_DSV_VPOS_OCP, 8),
> > + REGMAP_IRQ_REG_LINE(MT6370_IRQ_DSV_BST_OCP, 8),
> > + REGMAP_IRQ_REG_LINE(MT6370_IRQ_DSV_VNEG_SCP, 8),
> > + REGMAP_IRQ_REG_LINE(MT6370_IRQ_DSV_VPOS_SCP, 8)
> > +};
> > +
> > +static const struct regmap_irq_chip mt6370_irq_chip = {
> > + .name = "mt6370-irqs",
> > + .status_base = MT6370_REG_CHG_IRQ1,
> > + .mask_base = MT6370_REG_CHG_MASK1,
> > + .num_regs = MT6370_NUM_IRQREGS,
> > + .irqs = mt6370_irqs,
> > + .num_irqs = ARRAY_SIZE(mt6370_irqs),
> > +};
> > +
> > +static const struct resource mt6370_regulator_irqs[] = {
> > + DEFINE_RES_IRQ_NAMED(MT6370_IRQ_DSV_VPOS_SCP, "db_vpos_scp"),
> > + DEFINE_RES_IRQ_NAMED(MT6370_IRQ_DSV_VNEG_SCP, "db_vneg_scp"),
> > + DEFINE_RES_IRQ_NAMED(MT6370_IRQ_DSV_BST_OCP, "db_vbst_ocp"),
> > + DEFINE_RES_IRQ_NAMED(MT6370_IRQ_DSV_VPOS_OCP, "db_vpos_ocp"),
> > + DEFINE_RES_IRQ_NAMED(MT6370_IRQ_DSV_VNEG_OCP, "db_vneg_ocp"),
> > + DEFINE_RES_IRQ_NAMED(MT6370_IRQ_LDO_OC, "ldo_oc")
> > +};
> > +
> > +static const struct mfd_cell mt6370_devices[] = {
> > + MFD_CELL_OF("adc", NULL, NULL, 0, 0, "mediatek,mt6370-adc"),
> > + MFD_CELL_OF("charger", NULL, NULL, 0, 0, "mediatek,mt6370-charger"),
> > + MFD_CELL_OF("backlight", NULL, NULL, 0, 0, "mediatek,mt6370-backlight"),
> > + MFD_CELL_OF("flashlight", NULL, NULL, 0, 0, "mediatek,mt6370-flashlight"),
> > + MFD_CELL_OF("indicator", NULL, NULL, 0, 0, "mediatek,mt6370-indicator"),
> > + MFD_CELL_OF("tcpc", NULL, NULL, 0, 0, "mediatek,mt6370-tcpc"),
> > + MFD_CELL_RES("regulator", mt6370_regulator_irqs)
>
> The first parameters here should be prepended with something, perhaps
> "mt6370_"?
OK, we will add the prefix in the next patch.
>
> > +};
> > +
> > +static int mt6370_check_vendor_info(struct mt6370_info *info)
> > +{
> > + unsigned int devinfo;
> > + int ret;
> > +
> > + ret = regmap_read(info->regmap, MT6370_REG_DEV_INFO, &devinfo);
> > + if (ret)
> > + return ret;
> > +
> > + switch (FIELD_GET(MT6370_VENID_MASK, devinfo)) {
> > + case MT6370_VENID_RT5081:
> > + case MT6370_VENID_RT5081A:
> > + case MT6370_VENID_MT6370:
> > + case MT6370_VENID_MT6371:
> > + case MT6370_VENID_MT6372P:
> > + case MT6370_VENID_MT6372CP:
> > + break;
> > + default:
> > + dev_err(info->dev, "Unknown Vendor ID 0x%02x\n", devinfo);
> > + return -ENODEV;
> > + }
> > +
> > + return 0;
> > +}
> > +
> > +static int mt6370_regmap_read(void *context, const void *reg_buf,
> > + size_t reg_size, void *val_buf, size_t val_size)
> > +{
> > + struct mt6370_info *info = context;
> > + u8 bank_idx, bank_addr;
> > + int ret;
> > +
> > + bank_idx = *(u8 *)reg_buf;
> > + bank_addr = *(u8 *)(reg_buf + 1);
> > +
> > + ret = i2c_smbus_read_i2c_block_data(info->i2c[bank_idx], bank_addr,
> > + val_size, val_buf);
> > + if (ret < 0)
> > + return ret;
> > + else if (ret != val_size)
> > + return -EIO;
> > +
> > + return 0;
> > +}
> > +
> > +static int mt6370_regmap_write(void *context, const void *data, size_t count)
> > +{
> > + struct mt6370_info *info = context;
> > + u8 bank_idx, bank_addr;
> > + int len = count - MT6370_REG_ADDRLEN;
> > +
> > + bank_idx = *(u8 *)data;
> > + bank_addr = *(u8 *)(data + 1);
> > +
> > + return i2c_smbus_write_i2c_block_data(info->i2c[bank_idx], bank_addr,
> > + len, data + MT6370_REG_ADDRLEN);
> > +}
> > +
> > +static const struct regmap_bus mt6370_regmap_bus = {
> > + .read = mt6370_regmap_read,
> > + .write = mt6370_regmap_write,
> > +};
> > +
> > +static const struct regmap_config mt6370_regmap_config = {
> > + .reg_bits = 16,
> > + .val_bits = 8,
> > + .reg_format_endian = REGMAP_ENDIAN_BIG,
> > + .max_register = MT6370_REG_MAXADDR,
> > +};
> > +
> > +static int mt6370_probe(struct i2c_client *i2c)
> > +{
> > + struct mt6370_info *info;
> > + struct i2c_client *usbc_i2c;
> > + int ret;
> > +
> > + info = devm_kzalloc(&i2c->dev, sizeof(*info), GFP_KERNEL);
> > + if (!info)
> > + return -ENOMEM;
> > +
> > + info->dev = &i2c->dev;
> > +
> > + usbc_i2c = devm_i2c_new_dummy_device(&i2c->dev, i2c->adapter,
> > + MT6370_USBC_I2CADDR);
> > + if (IS_ERR(usbc_i2c))
> > + return dev_err_probe(&i2c->dev, PTR_ERR(usbc_i2c),
> > + "Failed to register USBC I2C client\n");
> > +
> > + /* Assign I2C client for PMU and TypeC */
> > + info->i2c[MT6370_PMU_I2C] = i2c;
> > + info->i2c[MT6370_USBC_I2C] = usbc_i2c;
> > +
> > + info->regmap = devm_regmap_init(&i2c->dev, &mt6370_regmap_bus, info,
> > + &mt6370_regmap_config);
>
> Apart from in mt6370_check_vendor_info() where is this actually used?
Well... from my understanding, we use this MFD driver to make other
drivers of MT6370 (e.g. charger, ADC, led...) use the same regmap
settings.
Thus, this regmap is not only used in mt6370_check_vendor_info().
>
> > + if (IS_ERR(info->regmap))
> > + return dev_err_probe(&i2c->dev, PTR_ERR(info->regmap),
> > + "Failed to register regmap\n");
> > +
> > + ret = mt6370_check_vendor_info(info);
> > + if (ret)
> > + return dev_err_probe(&i2c->dev, ret,
> > + "Failed to check vendor info\n");
> > +
> > + ret = devm_regmap_add_irq_chip(&i2c->dev, info->regmap, i2c->irq,
> > + IRQF_ONESHOT, -1, &mt6370_irq_chip,
> > + &info->irq_data);
> > + if (ret)
> > + return dev_err_probe(&i2c->dev, ret,
> > + "Failed to add irq chip\n");
> > +
> > + return devm_mfd_add_devices(&i2c->dev, PLATFORM_DEVID_AUTO,
> > + mt6370_devices, ARRAY_SIZE(mt6370_devices),
> > + NULL, 0,
> > + regmap_irq_get_domain(info->irq_data));
> > +}
> > +
> > +static const struct of_device_id mt6370_match_table[] = {
> > + { .compatible = "mediatek,mt6370", },
> > + {}
> > +};
> > +MODULE_DEVICE_TABLE(of, mt6370_match_table);
> > +
> > +static struct i2c_driver mt6370_driver = {
> > + .driver = {
> > + .name = "mt6370",
> > + .of_match_table = mt6370_match_table,
> > + },
> > + .probe_new = mt6370_probe,
> > +};
> > +module_i2c_driver(mt6370_driver);
> > +
> > +MODULE_AUTHOR("ChiYuan Huang <[email protected]>");
> > +MODULE_DESCRIPTION("MT6370 I2C Driver");
>
> This is not an I2C driver.
>
> > +MODULE_LICENSE("GPL v2");
>
> --
> Lee Jones [李琼斯]
> Principal Technical Lead - Developer Services
> Linaro.org │ Open source software for Arm SoCs
> Follow Linaro: Facebook | Twitter | Blog
Best regards,
ChiaEn Wu
On Wed, 13 Jul 2022, ChiaEn Wu wrote:
> Hi Lee,
>
> Thanks for your reply.
>
> Lee Jones <[email protected]> 於 2022年7月12日 週二 晚上11:29寫道：
> >
> > On Thu, 23 Jun 2022, ChiaEn Wu wrote:
> >
> > > From: ChiYuan Huang <[email protected]>
> > >
> > > Add Mediatek MT6370 MFD support.
> >
> > No such thing as "MFD support".
> >
> > And you're not getting away with submitting a 370 line patch with a 5
> > word change log either. :)
> >
> > Please at least tell us what the device is and what it's used for.
>
> I sincerely apologize.
> We will add more descriptions of the MT6370 feature in the v5 patch.
>
> >
> > > Signed-off-by: ChiYuan Huang <[email protected]>
> > > ---
> > >
> > > v3
> > > - Refine Kconfig help text
> > > - Refine error message of unknown vendor ID in
> > > mt6370_check_vendor_info()
> > > - Refine return value handling of mt6370_regmap_read()
> > > - Refine all probe error by using dev_err_probe()
> > > - Refine "bank_idx" and "bank_addr" in mt6370_regmap_read() and
> > > mt6370_regmap_write()
> > > - Add "#define VENID*" and drop the comments in
> > > mt6370_check_vendor_info()
> > > - Drop "MFD" in MODULE_DESCRIPTION()
> > > ---
> > > drivers/mfd/Kconfig | 13 ++
> > > drivers/mfd/Makefile | 1 +
> > > drivers/mfd/mt6370.c | 358 +++++++++++++++++++++++++++++++++++++++++++++++++++
> > > 3 files changed, 372 insertions(+)
> > > create mode 100644 drivers/mfd/mt6370.c
[...]
> > > +static int mt6370_probe(struct i2c_client *i2c)
> > > +{
> > > + struct mt6370_info *info;
> > > + struct i2c_client *usbc_i2c;
> > > + int ret;
> > > +
> > > + info = devm_kzalloc(&i2c->dev, sizeof(*info), GFP_KERNEL);
> > > + if (!info)
> > > + return -ENOMEM;
> > > +
> > > + info->dev = &i2c->dev;
> > > +
> > > + usbc_i2c = devm_i2c_new_dummy_device(&i2c->dev, i2c->adapter,
> > > + MT6370_USBC_I2CADDR);
> > > + if (IS_ERR(usbc_i2c))
> > > + return dev_err_probe(&i2c->dev, PTR_ERR(usbc_i2c),
> > > + "Failed to register USBC I2C client\n");
> > > +
> > > + /* Assign I2C client for PMU and TypeC */
> > > + info->i2c[MT6370_PMU_I2C] = i2c;
> > > + info->i2c[MT6370_USBC_I2C] = usbc_i2c;
> > > +
> > > + info->regmap = devm_regmap_init(&i2c->dev, &mt6370_regmap_bus, info,
> > > + &mt6370_regmap_config);
> >
> > Apart from in mt6370_check_vendor_info() where is this actually used?
>
> Well... from my understanding, we use this MFD driver to make other
> drivers of MT6370 (e.g. charger, ADC, led...) use the same regmap
> settings.
> Thus, this regmap is not only used in mt6370_check_vendor_info().
Well for that to happen you need to store the data somewhere for the
child devices to fetch from. I don't see that happening in this
patch? What did I miss?
--
Lee Jones [李琼斯]
Principal Technical Lead - Developer Services
Linaro.org │ Open source software for Arm SoCs
Follow Linaro: Facebook | Twitter | Blog
Hi Lee,
Lee Jones <[email protected]> 於 2022年7月13日 週三 下午4:04寫道：
>
> On Wed, 13 Jul 2022, ChiaEn Wu wrote:
>
> > Hi Lee,
> >
> > Thanks for your reply.
> >
> > Lee Jones <[email protected]> 於 2022年7月12日 週二 晚上11:29寫道：
> > >
> > > On Thu, 23 Jun 2022, ChiaEn Wu wrote:
> > >
> > > > From: ChiYuan Huang <[email protected]>
> > > >
> > > > Add Mediatek MT6370 MFD support.
> > >
> > > No such thing as "MFD support".
> > >
> > > And you're not getting away with submitting a 370 line patch with a 5
> > > word change log either. :)
> > >
> > > Please at least tell us what the device is and what it's used for.
> >
> > I sincerely apologize.
> > We will add more descriptions of the MT6370 feature in the v5 patch.
> >
> > >
> > > > Signed-off-by: ChiYuan Huang <[email protected]>
> > > > ---
> > > >
> > > > v3
> > > > - Refine Kconfig help text
> > > > - Refine error message of unknown vendor ID in
> > > > mt6370_check_vendor_info()
> > > > - Refine return value handling of mt6370_regmap_read()
> > > > - Refine all probe error by using dev_err_probe()
> > > > - Refine "bank_idx" and "bank_addr" in mt6370_regmap_read() and
> > > > mt6370_regmap_write()
> > > > - Add "#define VENID*" and drop the comments in
> > > > mt6370_check_vendor_info()
> > > > - Drop "MFD" in MODULE_DESCRIPTION()
> > > > ---
> > > > drivers/mfd/Kconfig | 13 ++
> > > > drivers/mfd/Makefile | 1 +
> > > > drivers/mfd/mt6370.c | 358 +++++++++++++++++++++++++++++++++++++++++++++++++++
> > > > 3 files changed, 372 insertions(+)
> > > > create mode 100644 drivers/mfd/mt6370.c
>
> [...]
>
> > > > +static const struct mfd_cell mt6370_devices[] = {
> > > > + MFD_CELL_OF("adc", NULL, NULL, 0, 0, "mediatek,mt6370-adc"),
> > > > + MFD_CELL_OF("charger", NULL, NULL, 0, 0, "mediatek,mt6370-charger"),
> > > > + MFD_CELL_OF("backlight", NULL, NULL, 0, 0, "mediatek,mt6370-backlight"),
> > > > + MFD_CELL_OF("flashlight", NULL, NULL, 0, 0, "mediatek,mt6370-flashlight"),
> > > > + MFD_CELL_OF("indicator", NULL, NULL, 0, 0, "mediatek,mt6370-indicator"),
> > > > + MFD_CELL_OF("tcpc", NULL, NULL, 0, 0, "mediatek,mt6370-tcpc"),
> > > > + MFD_CELL_RES("regulator", mt6370_regulator_irqs)
> > >
> > > The first parameters here should be prepended with something, perhaps
> > > "mt6370_"?
>
> > OK, we will add the prefix in the next patch.
Sorry, I forgot to ask a question in the last mail.
I wonder if using "mt6370-xxx" (dash) is better than using "mt6370_"
(underline) ??
Thanks.
> [...]
>
> > > > +static int mt6370_probe(struct i2c_client *i2c)
> > > > +{
> > > > + struct mt6370_info *info;
> > > > + struct i2c_client *usbc_i2c;
> > > > + int ret;
> > > > +
> > > > + info = devm_kzalloc(&i2c->dev, sizeof(*info), GFP_KERNEL);
> > > > + if (!info)
> > > > + return -ENOMEM;
> > > > +
> > > > + info->dev = &i2c->dev;
> > > > +
> > > > + usbc_i2c = devm_i2c_new_dummy_device(&i2c->dev, i2c->adapter,
> > > > + MT6370_USBC_I2CADDR);
> > > > + if (IS_ERR(usbc_i2c))
> > > > + return dev_err_probe(&i2c->dev, PTR_ERR(usbc_i2c),
> > > > + "Failed to register USBC I2C client\n");
> > > > +
> > > > + /* Assign I2C client for PMU and TypeC */
> > > > + info->i2c[MT6370_PMU_I2C] = i2c;
> > > > + info->i2c[MT6370_USBC_I2C] = usbc_i2c;
> > > > +
> > > > + info->regmap = devm_regmap_init(&i2c->dev, &mt6370_regmap_bus, info,
> > > > + &mt6370_regmap_config);
> > >
> > > Apart from in mt6370_check_vendor_info() where is this actually used?
> >
> > Well... from my understanding, we use this MFD driver to make other
> > drivers of MT6370 (e.g. charger, ADC, led...) use the same regmap
> > settings.
> > Thus, this regmap is not only used in mt6370_check_vendor_info().
>
> Well for that to happen you need to store the data somewhere for the
> child devices to fetch from. I don't see that happening in this
> patch? What did I miss?
hmmm... I got your point... I will let regmap be a local var in
probe() in the next patch.
Thank you so much!
>
> --
> Lee Jones [李琼斯]
> Principal Technical Lead - Developer Services
> Linaro.org │ Open source software for Arm SoCs
> Follow Linaro: Facebook | Twitter | Blog
Best regards,
ChiaEn Wu