Neither the DSA layer nor the bridge code (see br_set_state) really care
about eventual errors from STP state setters, so make it void.
The DSA layer separates the prepare and commit phases of switchdev in
two different functions. Logical errors must not happen in commit
routines, so make them void.
Changes v1 -> v2:
- rename port_stp_update to port_stp_state_set
- don't change code flow of bcm_sf2_sw_br_set_stp_state
- prefer netdev_err over netdev_warn
Vivien Didelot (3):
net: dsa: make the STP state function return void
net: dsa: make the FDB add function return void
net: dsa: make the VLAN add function return void
Documentation/networking/dsa/dsa.txt | 2 +-
drivers/net/dsa/bcm_sf2.c | 25 +++++++--------
drivers/net/dsa/mv88e6171.c | 2 +-
drivers/net/dsa/mv88e6352.c | 2 +-
drivers/net/dsa/mv88e6xxx.c | 44 +++++++++++----------------
drivers/net/dsa/mv88e6xxx.h | 14 ++++-----
include/net/dsa.h | 8 ++---
net/dsa/slave.c | 59 ++++++++++++++++--------------------
8 files changed, 69 insertions(+), 87 deletions(-)
--
2.8.0
The DSA layer doesn't care about the return code of the port_stp_update
routine, so make it void in the layer and the DSA drivers.
Replace the useless dsa_slave_stp_update function with a
dsa_slave_stp_state function used to reply to the switchdev
SWITCHDEV_ATTR_ID_PORT_STP_STATE attribute.
In the meantime, rename port_stp_update to port_stp_state_set to
explicit the state change.
Signed-off-by: Vivien Didelot <[email protected]>
---
Documentation/networking/dsa/dsa.txt | 2 +-
drivers/net/dsa/bcm_sf2.c | 16 ++++++----------
drivers/net/dsa/mv88e6171.c | 2 +-
drivers/net/dsa/mv88e6352.c | 2 +-
drivers/net/dsa/mv88e6xxx.c | 6 ++----
drivers/net/dsa/mv88e6xxx.h | 2 +-
include/net/dsa.h | 4 ++--
net/dsa/slave.c | 32 +++++++++++++++-----------------
8 files changed, 29 insertions(+), 37 deletions(-)
diff --git a/Documentation/networking/dsa/dsa.txt b/Documentation/networking/dsa/dsa.txt
index 013b670..ba698c5 100644
--- a/Documentation/networking/dsa/dsa.txt
+++ b/Documentation/networking/dsa/dsa.txt
@@ -533,7 +533,7 @@ Bridge layer
out at the switch hardware for the switch to (re) learn MAC addresses behind
this port.
-- port_stp_update: bridge layer function invoked when a given switch port STP
+- port_stp_state_set: bridge layer function invoked when a given switch port STP
state is computed by the bridge layer and should be propagated to switch
hardware to forward/block/learn traffic. The switch driver is responsible for
computing a STP state change based on current and asked parameters and perform
diff --git a/drivers/net/dsa/bcm_sf2.c b/drivers/net/dsa/bcm_sf2.c
index 95944d5..2bba1d9 100644
--- a/drivers/net/dsa/bcm_sf2.c
+++ b/drivers/net/dsa/bcm_sf2.c
@@ -545,12 +545,11 @@ static void bcm_sf2_sw_br_leave(struct dsa_switch *ds, int port)
priv->port_sts[port].bridge_dev = NULL;
}
-static int bcm_sf2_sw_br_set_stp_state(struct dsa_switch *ds, int port,
- u8 state)
+static void bcm_sf2_sw_br_set_stp_state(struct dsa_switch *ds, int port,
+ u8 state)
{
struct bcm_sf2_priv *priv = ds_to_priv(ds);
u8 hw_state, cur_hw_state;
- int ret = 0;
u32 reg;
reg = core_readl(priv, CORE_G_PCTL_PORT(port));
@@ -574,7 +573,7 @@ static int bcm_sf2_sw_br_set_stp_state(struct dsa_switch *ds, int port,
break;
default:
pr_err("%s: invalid STP state: %d\n", __func__, state);
- return -EINVAL;
+ return;
}
/* Fast-age ARL entries if we are moving a port from Learning or
@@ -584,10 +583,9 @@ static int bcm_sf2_sw_br_set_stp_state(struct dsa_switch *ds, int port,
if (cur_hw_state != hw_state) {
if (cur_hw_state >= G_MISTP_LEARN_STATE &&
hw_state <= G_MISTP_LISTEN_STATE) {
- ret = bcm_sf2_sw_fast_age_port(ds, port);
- if (ret) {
+ if (bcm_sf2_sw_fast_age_port(ds, port)) {
pr_err("%s: fast-ageing failed\n", __func__);
- return ret;
+ return;
}
}
}
@@ -596,8 +594,6 @@ static int bcm_sf2_sw_br_set_stp_state(struct dsa_switch *ds, int port,
reg &= ~(G_MISTP_STATE_MASK << G_MISTP_STATE_SHIFT);
reg |= hw_state;
core_writel(priv, reg, CORE_G_PCTL_PORT(port));
-
- return 0;
}
/* Address Resolution Logic routines */
@@ -1387,7 +1383,7 @@ static struct dsa_switch_driver bcm_sf2_switch_driver = {
.set_eee = bcm_sf2_sw_set_eee,
.port_bridge_join = bcm_sf2_sw_br_join,
.port_bridge_leave = bcm_sf2_sw_br_leave,
- .port_stp_update = bcm_sf2_sw_br_set_stp_state,
+ .port_stp_state_set = bcm_sf2_sw_br_set_stp_state,
.port_fdb_prepare = bcm_sf2_sw_fdb_prepare,
.port_fdb_add = bcm_sf2_sw_fdb_add,
.port_fdb_del = bcm_sf2_sw_fdb_del,
diff --git a/drivers/net/dsa/mv88e6171.c b/drivers/net/dsa/mv88e6171.c
index c0164b9..0e62f3b 100644
--- a/drivers/net/dsa/mv88e6171.c
+++ b/drivers/net/dsa/mv88e6171.c
@@ -105,7 +105,7 @@ struct dsa_switch_driver mv88e6171_switch_driver = {
.get_regs = mv88e6xxx_get_regs,
.port_bridge_join = mv88e6xxx_port_bridge_join,
.port_bridge_leave = mv88e6xxx_port_bridge_leave,
- .port_stp_update = mv88e6xxx_port_stp_update,
+ .port_stp_state_set = mv88e6xxx_port_stp_state_set,
.port_vlan_filtering = mv88e6xxx_port_vlan_filtering,
.port_vlan_prepare = mv88e6xxx_port_vlan_prepare,
.port_vlan_add = mv88e6xxx_port_vlan_add,
diff --git a/drivers/net/dsa/mv88e6352.c b/drivers/net/dsa/mv88e6352.c
index 5f528ab..7f452e4 100644
--- a/drivers/net/dsa/mv88e6352.c
+++ b/drivers/net/dsa/mv88e6352.c
@@ -326,7 +326,7 @@ struct dsa_switch_driver mv88e6352_switch_driver = {
.get_regs = mv88e6xxx_get_regs,
.port_bridge_join = mv88e6xxx_port_bridge_join,
.port_bridge_leave = mv88e6xxx_port_bridge_leave,
- .port_stp_update = mv88e6xxx_port_stp_update,
+ .port_stp_state_set = mv88e6xxx_port_stp_state_set,
.port_vlan_filtering = mv88e6xxx_port_vlan_filtering,
.port_vlan_prepare = mv88e6xxx_port_vlan_prepare,
.port_vlan_add = mv88e6xxx_port_vlan_add,
diff --git a/drivers/net/dsa/mv88e6xxx.c b/drivers/net/dsa/mv88e6xxx.c
index 0dda281..53c545c 100644
--- a/drivers/net/dsa/mv88e6xxx.c
+++ b/drivers/net/dsa/mv88e6xxx.c
@@ -1193,7 +1193,7 @@ static int _mv88e6xxx_port_based_vlan_map(struct dsa_switch *ds, int port)
return _mv88e6xxx_reg_write(ds, REG_PORT(port), PORT_BASE_VLAN, reg);
}
-int mv88e6xxx_port_stp_update(struct dsa_switch *ds, int port, u8 state)
+void mv88e6xxx_port_stp_state_set(struct dsa_switch *ds, int port, u8 state)
{
struct mv88e6xxx_priv_state *ps = ds_to_priv(ds);
int stp_state;
@@ -1215,14 +1215,12 @@ int mv88e6xxx_port_stp_update(struct dsa_switch *ds, int port, u8 state)
break;
}
- /* mv88e6xxx_port_stp_update may be called with softirqs disabled,
+ /* mv88e6xxx_port_stp_state_set may be called with softirqs disabled,
* so we can not update the port state directly but need to schedule it.
*/
ps->ports[port].state = stp_state;
set_bit(port, ps->port_state_update_mask);
schedule_work(&ps->bridge_work);
-
- return 0;
}
static int _mv88e6xxx_port_pvid(struct dsa_switch *ds, int port, u16 *new,
diff --git a/drivers/net/dsa/mv88e6xxx.h b/drivers/net/dsa/mv88e6xxx.h
index 26a424a..4944855 100644
--- a/drivers/net/dsa/mv88e6xxx.h
+++ b/drivers/net/dsa/mv88e6xxx.h
@@ -497,7 +497,7 @@ int mv88e6xxx_set_eee(struct dsa_switch *ds, int port,
int mv88e6xxx_port_bridge_join(struct dsa_switch *ds, int port,
struct net_device *bridge);
void mv88e6xxx_port_bridge_leave(struct dsa_switch *ds, int port);
-int mv88e6xxx_port_stp_update(struct dsa_switch *ds, int port, u8 state);
+void mv88e6xxx_port_stp_state_set(struct dsa_switch *ds, int port, u8 state);
int mv88e6xxx_port_vlan_filtering(struct dsa_switch *ds, int port,
bool vlan_filtering);
int mv88e6xxx_port_vlan_prepare(struct dsa_switch *ds, int port,
diff --git a/include/net/dsa.h b/include/net/dsa.h
index 6463bb2..2123981 100644
--- a/include/net/dsa.h
+++ b/include/net/dsa.h
@@ -299,8 +299,8 @@ struct dsa_switch_driver {
int (*port_bridge_join)(struct dsa_switch *ds, int port,
struct net_device *bridge);
void (*port_bridge_leave)(struct dsa_switch *ds, int port);
- int (*port_stp_update)(struct dsa_switch *ds, int port,
- u8 state);
+ void (*port_stp_state_set)(struct dsa_switch *ds, int port,
+ u8 state);
/*
* VLAN support
diff --git a/net/dsa/slave.c b/net/dsa/slave.c
index a575f03..088215c 100644
--- a/net/dsa/slave.c
+++ b/net/dsa/slave.c
@@ -104,8 +104,8 @@ static int dsa_slave_open(struct net_device *dev)
goto clear_promisc;
}
- if (ds->drv->port_stp_update)
- ds->drv->port_stp_update(ds, p->port, stp_state);
+ if (ds->drv->port_stp_state_set)
+ ds->drv->port_stp_state_set(ds, p->port, stp_state);
if (p->phy)
phy_start(p->phy);
@@ -147,8 +147,8 @@ static int dsa_slave_close(struct net_device *dev)
if (ds->drv->port_disable)
ds->drv->port_disable(ds, p->port, p->phy);
- if (ds->drv->port_stp_update)
- ds->drv->port_stp_update(ds, p->port, BR_STATE_DISABLED);
+ if (ds->drv->port_stp_state_set)
+ ds->drv->port_stp_state_set(ds, p->port, BR_STATE_DISABLED);
return 0;
}
@@ -305,16 +305,19 @@ static int dsa_slave_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
return -EOPNOTSUPP;
}
-static int dsa_slave_stp_update(struct net_device *dev, u8 state)
+static int dsa_slave_stp_state_set(struct net_device *dev,
+ const struct switchdev_attr *attr,
+ struct switchdev_trans *trans)
{
struct dsa_slave_priv *p = netdev_priv(dev);
struct dsa_switch *ds = p->parent;
- int ret = -EOPNOTSUPP;
- if (ds->drv->port_stp_update)
- ret = ds->drv->port_stp_update(ds, p->port, state);
+ if (switchdev_trans_ph_prepare(trans))
+ return ds->drv->port_stp_state_set ? 0 : -EOPNOTSUPP;
- return ret;
+ ds->drv->port_stp_state_set(ds, p->port, attr->u.stp_state);
+
+ return 0;
}
static int dsa_slave_vlan_filtering(struct net_device *dev,
@@ -339,17 +342,11 @@ static int dsa_slave_port_attr_set(struct net_device *dev,
const struct switchdev_attr *attr,
struct switchdev_trans *trans)
{
- struct dsa_slave_priv *p = netdev_priv(dev);
- struct dsa_switch *ds = p->parent;
int ret;
switch (attr->id) {
case SWITCHDEV_ATTR_ID_PORT_STP_STATE:
- if (switchdev_trans_ph_prepare(trans))
- ret = ds->drv->port_stp_update ? 0 : -EOPNOTSUPP;
- else
- ret = ds->drv->port_stp_update(ds, p->port,
- attr->u.stp_state);
+ ret = dsa_slave_stp_state_set(dev, attr, trans);
break;
case SWITCHDEV_ATTR_ID_BRIDGE_VLAN_FILTERING:
ret = dsa_slave_vlan_filtering(dev, attr, trans);
@@ -468,7 +465,8 @@ static void dsa_slave_bridge_port_leave(struct net_device *dev)
/* Port left the bridge, put in BR_STATE_DISABLED by the bridge layer,
* so allow it to be in BR_STATE_FORWARDING to be kept functional
*/
- dsa_slave_stp_update(dev, BR_STATE_FORWARDING);
+ if (ds->drv->port_stp_state_set)
+ ds->drv->port_stp_state_set(ds, p->port, BR_STATE_FORWARDING);
}
static int dsa_slave_port_attr_get(struct net_device *dev,
--
2.8.0
The switchdev design implies that a software error should not happen in
the commit phase since it must have been previously reported in the
prepare phase. If an hardware error occurs during the commit phase,
there is nothing switchdev can do about it.
The DSA layer separates port_fdb_prepare and port_fdb_add for simplicity
and convenience. If an hardware error occurs during the commit phase,
there is no need to report it outside the DSA driver itself.
Make the DSA port_fdb_add routine return void for explicitness.
Signed-off-by: Vivien Didelot <[email protected]>
---
drivers/net/dsa/bcm_sf2.c | 9 +++++----
drivers/net/dsa/mv88e6xxx.c | 12 +++++-------
drivers/net/dsa/mv88e6xxx.h | 6 +++---
include/net/dsa.h | 2 +-
net/dsa/slave.c | 16 ++++++++--------
5 files changed, 22 insertions(+), 23 deletions(-)
diff --git a/drivers/net/dsa/bcm_sf2.c b/drivers/net/dsa/bcm_sf2.c
index 2bba1d9..780f228 100644
--- a/drivers/net/dsa/bcm_sf2.c
+++ b/drivers/net/dsa/bcm_sf2.c
@@ -724,13 +724,14 @@ static int bcm_sf2_sw_fdb_prepare(struct dsa_switch *ds, int port,
return 0;
}
-static int bcm_sf2_sw_fdb_add(struct dsa_switch *ds, int port,
- const struct switchdev_obj_port_fdb *fdb,
- struct switchdev_trans *trans)
+static void bcm_sf2_sw_fdb_add(struct dsa_switch *ds, int port,
+ const struct switchdev_obj_port_fdb *fdb,
+ struct switchdev_trans *trans)
{
struct bcm_sf2_priv *priv = ds_to_priv(ds);
- return bcm_sf2_arl_op(priv, 0, port, fdb->addr, fdb->vid, true);
+ if (bcm_sf2_arl_op(priv, 0, port, fdb->addr, fdb->vid, true))
+ pr_err("%s: failed to add MAC address\n", __func__);
}
static int bcm_sf2_sw_fdb_del(struct dsa_switch *ds, int port,
diff --git a/drivers/net/dsa/mv88e6xxx.c b/drivers/net/dsa/mv88e6xxx.c
index 53c545c..ef36bf6 100644
--- a/drivers/net/dsa/mv88e6xxx.c
+++ b/drivers/net/dsa/mv88e6xxx.c
@@ -2090,21 +2090,19 @@ int mv88e6xxx_port_fdb_prepare(struct dsa_switch *ds, int port,
return 0;
}
-int mv88e6xxx_port_fdb_add(struct dsa_switch *ds, int port,
- const struct switchdev_obj_port_fdb *fdb,
- struct switchdev_trans *trans)
+void mv88e6xxx_port_fdb_add(struct dsa_switch *ds, int port,
+ const struct switchdev_obj_port_fdb *fdb,
+ struct switchdev_trans *trans)
{
int state = is_multicast_ether_addr(fdb->addr) ?
GLOBAL_ATU_DATA_STATE_MC_STATIC :
GLOBAL_ATU_DATA_STATE_UC_STATIC;
struct mv88e6xxx_priv_state *ps = ds_to_priv(ds);
- int ret;
mutex_lock(&ps->smi_mutex);
- ret = _mv88e6xxx_port_fdb_load(ds, port, fdb->addr, fdb->vid, state);
+ if (_mv88e6xxx_port_fdb_load(ds, port, fdb->addr, fdb->vid, state))
+ netdev_err(ds->ports[port], "failed to load MAC address\n");
mutex_unlock(&ps->smi_mutex);
-
- return ret;
}
int mv88e6xxx_port_fdb_del(struct dsa_switch *ds, int port,
diff --git a/drivers/net/dsa/mv88e6xxx.h b/drivers/net/dsa/mv88e6xxx.h
index 4944855..a7dccbe 100644
--- a/drivers/net/dsa/mv88e6xxx.h
+++ b/drivers/net/dsa/mv88e6xxx.h
@@ -514,9 +514,9 @@ int mv88e6xxx_port_vlan_dump(struct dsa_switch *ds, int port,
int mv88e6xxx_port_fdb_prepare(struct dsa_switch *ds, int port,
const struct switchdev_obj_port_fdb *fdb,
struct switchdev_trans *trans);
-int mv88e6xxx_port_fdb_add(struct dsa_switch *ds, int port,
- const struct switchdev_obj_port_fdb *fdb,
- struct switchdev_trans *trans);
+void mv88e6xxx_port_fdb_add(struct dsa_switch *ds, int port,
+ const struct switchdev_obj_port_fdb *fdb,
+ struct switchdev_trans *trans);
int mv88e6xxx_port_fdb_del(struct dsa_switch *ds, int port,
const struct switchdev_obj_port_fdb *fdb);
int mv88e6xxx_port_fdb_dump(struct dsa_switch *ds, int port,
diff --git a/include/net/dsa.h b/include/net/dsa.h
index 2123981..f1670a4 100644
--- a/include/net/dsa.h
+++ b/include/net/dsa.h
@@ -325,7 +325,7 @@ struct dsa_switch_driver {
int (*port_fdb_prepare)(struct dsa_switch *ds, int port,
const struct switchdev_obj_port_fdb *fdb,
struct switchdev_trans *trans);
- int (*port_fdb_add)(struct dsa_switch *ds, int port,
+ void (*port_fdb_add)(struct dsa_switch *ds, int port,
const struct switchdev_obj_port_fdb *fdb,
struct switchdev_trans *trans);
int (*port_fdb_del)(struct dsa_switch *ds, int port,
diff --git a/net/dsa/slave.c b/net/dsa/slave.c
index 088215c..90bc744 100644
--- a/net/dsa/slave.c
+++ b/net/dsa/slave.c
@@ -256,17 +256,17 @@ static int dsa_slave_port_fdb_add(struct net_device *dev,
{
struct dsa_slave_priv *p = netdev_priv(dev);
struct dsa_switch *ds = p->parent;
- int ret;
- if (!ds->drv->port_fdb_prepare || !ds->drv->port_fdb_add)
- return -EOPNOTSUPP;
+ if (switchdev_trans_ph_prepare(trans)) {
+ if (!ds->drv->port_fdb_prepare || !ds->drv->port_fdb_add)
+ return -EOPNOTSUPP;
- if (switchdev_trans_ph_prepare(trans))
- ret = ds->drv->port_fdb_prepare(ds, p->port, fdb, trans);
- else
- ret = ds->drv->port_fdb_add(ds, p->port, fdb, trans);
+ return ds->drv->port_fdb_prepare(ds, p->port, fdb, trans);
+ }
- return ret;
+ ds->drv->port_fdb_add(ds, p->port, fdb, trans);
+
+ return 0;
}
static int dsa_slave_port_fdb_del(struct net_device *dev,
--
2.8.0
The switchdev design implies that a software error should not happen in
the commit phase since it must have been previously reported in the
prepare phase. If an hardware error occurs during the commit phase,
there is nothing switchdev can do about it.
The DSA layer separates port_vlan_prepare and port_vlan_add for
simplicity and convenience. If an hardware error occurs during the
commit phase, there is no need to report it outside the driver itself.
Make the DSA port_vlan_add routine return void for explicitness.
Signed-off-by: Vivien Didelot <[email protected]>
---
drivers/net/dsa/mv88e6xxx.c | 26 +++++++++++---------------
drivers/net/dsa/mv88e6xxx.h | 6 +++---
include/net/dsa.h | 2 +-
net/dsa/slave.c | 11 +++--------
4 files changed, 18 insertions(+), 27 deletions(-)
diff --git a/drivers/net/dsa/mv88e6xxx.c b/drivers/net/dsa/mv88e6xxx.c
index ef36bf6..62320fc 100644
--- a/drivers/net/dsa/mv88e6xxx.c
+++ b/drivers/net/dsa/mv88e6xxx.c
@@ -1908,31 +1908,27 @@ static int _mv88e6xxx_port_vlan_add(struct dsa_switch *ds, int port, u16 vid,
return _mv88e6xxx_vtu_loadpurge(ds, &vlan);
}
-int mv88e6xxx_port_vlan_add(struct dsa_switch *ds, int port,
- const struct switchdev_obj_port_vlan *vlan,
- struct switchdev_trans *trans)
+void mv88e6xxx_port_vlan_add(struct dsa_switch *ds, int port,
+ const struct switchdev_obj_port_vlan *vlan,
+ struct switchdev_trans *trans)
{
struct mv88e6xxx_priv_state *ps = ds_to_priv(ds);
bool untagged = vlan->flags & BRIDGE_VLAN_INFO_UNTAGGED;
bool pvid = vlan->flags & BRIDGE_VLAN_INFO_PVID;
u16 vid;
- int err = 0;
mutex_lock(&ps->smi_mutex);
- for (vid = vlan->vid_begin; vid <= vlan->vid_end; ++vid) {
- err = _mv88e6xxx_port_vlan_add(ds, port, vid, untagged);
- if (err)
- goto unlock;
- }
+ for (vid = vlan->vid_begin; vid <= vlan->vid_end; ++vid)
+ if (_mv88e6xxx_port_vlan_add(ds, port, vid, untagged))
+ netdev_err(ds->ports[port], "failed to add VLAN %d%c\n",
+ vid, untagged ? 'u' : 't');
- /* no PVID with ranges, otherwise it's a bug */
- if (pvid)
- err = _mv88e6xxx_port_pvid_set(ds, port, vlan->vid_end);
-unlock:
- mutex_unlock(&ps->smi_mutex);
+ if (pvid && _mv88e6xxx_port_pvid_set(ds, port, vlan->vid_end))
+ netdev_err(ds->ports[port], "failed to set PVID %d\n",
+ vlan->vid_end);
- return err;
+ mutex_unlock(&ps->smi_mutex);
}
static int _mv88e6xxx_port_vlan_del(struct dsa_switch *ds, int port, u16 vid)
diff --git a/drivers/net/dsa/mv88e6xxx.h b/drivers/net/dsa/mv88e6xxx.h
index a7dccbe..236bcaa 100644
--- a/drivers/net/dsa/mv88e6xxx.h
+++ b/drivers/net/dsa/mv88e6xxx.h
@@ -503,9 +503,9 @@ int mv88e6xxx_port_vlan_filtering(struct dsa_switch *ds, int port,
int mv88e6xxx_port_vlan_prepare(struct dsa_switch *ds, int port,
const struct switchdev_obj_port_vlan *vlan,
struct switchdev_trans *trans);
-int mv88e6xxx_port_vlan_add(struct dsa_switch *ds, int port,
- const struct switchdev_obj_port_vlan *vlan,
- struct switchdev_trans *trans);
+void mv88e6xxx_port_vlan_add(struct dsa_switch *ds, int port,
+ const struct switchdev_obj_port_vlan *vlan,
+ struct switchdev_trans *trans);
int mv88e6xxx_port_vlan_del(struct dsa_switch *ds, int port,
const struct switchdev_obj_port_vlan *vlan);
int mv88e6xxx_port_vlan_dump(struct dsa_switch *ds, int port,
diff --git a/include/net/dsa.h b/include/net/dsa.h
index f1670a4..18d1be3 100644
--- a/include/net/dsa.h
+++ b/include/net/dsa.h
@@ -310,7 +310,7 @@ struct dsa_switch_driver {
int (*port_vlan_prepare)(struct dsa_switch *ds, int port,
const struct switchdev_obj_port_vlan *vlan,
struct switchdev_trans *trans);
- int (*port_vlan_add)(struct dsa_switch *ds, int port,
+ void (*port_vlan_add)(struct dsa_switch *ds, int port,
const struct switchdev_obj_port_vlan *vlan,
struct switchdev_trans *trans);
int (*port_vlan_del)(struct dsa_switch *ds, int port,
diff --git a/net/dsa/slave.c b/net/dsa/slave.c
index 90bc744..2dae0d0 100644
--- a/net/dsa/slave.c
+++ b/net/dsa/slave.c
@@ -207,21 +207,16 @@ static int dsa_slave_port_vlan_add(struct net_device *dev,
{
struct dsa_slave_priv *p = netdev_priv(dev);
struct dsa_switch *ds = p->parent;
- int err;
if (switchdev_trans_ph_prepare(trans)) {
if (!ds->drv->port_vlan_prepare || !ds->drv->port_vlan_add)
return -EOPNOTSUPP;
- err = ds->drv->port_vlan_prepare(ds, p->port, vlan, trans);
- if (err)
- return err;
- } else {
- err = ds->drv->port_vlan_add(ds, p->port, vlan, trans);
- if (err)
- return err;
+ return ds->drv->port_vlan_prepare(ds, p->port, vlan, trans);
}
+ ds->drv->port_vlan_add(ds, p->port, vlan, trans);
+
return 0;
}
--
2.8.0
On Wed, Apr 06, 2016 at 11:55:02AM -0400, Vivien Didelot wrote:
> Neither the DSA layer nor the bridge code (see br_set_state) really care
> about eventual errors from STP state setters, so make it void.
>
> The DSA layer separates the prepare and commit phases of switchdev in
> two different functions. Logical errors must not happen in commit
> routines, so make them void.
Looks good.
Reviewed-by: Andrew Lunn <[email protected]>
Thanks
Andrew
2016-04-06 8:55 GMT-07:00 Vivien Didelot <[email protected]>:
> Neither the DSA layer nor the bridge code (see br_set_state) really care
> about eventual errors from STP state setters, so make it void.
>
> The DSA layer separates the prepare and commit phases of switchdev in
> two different functions. Logical errors must not happen in commit
> routines, so make them void.
>
> Changes v1 -> v2:
> - rename port_stp_update to port_stp_state_set
> - don't change code flow of bcm_sf2_sw_br_set_stp_state
> - prefer netdev_err over netdev_warn
>
> Vivien Didelot (3):
> net: dsa: make the STP state function return void
> net: dsa: make the FDB add function return void
> net: dsa: make the VLAN add function return void
Reviewed-by: Florian Fainelli <[email protected]>
--
Florian
From: Vivien Didelot <[email protected]>
Date: Wed, 6 Apr 2016 11:55:02 -0400
> Neither the DSA layer nor the bridge code (see br_set_state) really care
> about eventual errors from STP state setters, so make it void.
>
> The DSA layer separates the prepare and commit phases of switchdev in
> two different functions. Logical errors must not happen in commit
> routines, so make them void.
>
> Changes v1 -> v2:
> - rename port_stp_update to port_stp_state_set
> - don't change code flow of bcm_sf2_sw_br_set_stp_state
> - prefer netdev_err over netdev_warn
Series applied.