PX30.Core is an EDIMM SOM based on Rockchip PX30 from Engicam.
PX30.Core needs to mount on top of Engicam baseboards for creating
complete platform boards.
Possible baseboards are,
- EDIMM2.2 Starter Kit
- C.TOUCH 2.0 Carrier Board
Changes for v4:
- collect Rob A-b
Changes for v3:
- resolved Johan comments about sorting node properties
- add copyright to Amarula Solutions
- update px30 dtsi author
Changes for v2:
- include C.TOUCH 2.0 carrier board
- skip 10" OF LCD as it requires separate dts with panel support.
Note: These baseboards can be used for i.MX8 SOM's as well. So having
baseboard on respective SoC seems to be easy rather than making it
common across all.
Any inputs?
Jagan.
Jagan Teki (6):
dt-bindings: arm: rockchip: Add Engicam PX30.Core EDIMM2.2 Starter Kit
arm64: dts: rockchip: px30: Add Engicam EDIMM2.2 Starter Kit
arm64: dts: rockchip: Add Engicam PX30.Core EDIMM2.2 Starter Kit
dt-bindings: arm: rockchip: Add Engicam PX30.Core C.TOUCH 2.0
arm64: dts: rockchip: px30: Add Engicam C.TOUCH 2.0
arm64: dts: rockchip: Add Engicam PX30.Core C.TOUCH 2.0
Michael Trimarchi (1):
arm64: dts: rockchip: Add Engicam PX30.Core SOM
.../devicetree/bindings/arm/rockchip.yaml | 12 +
arch/arm64/boot/dts/rockchip/Makefile | 2 +
.../dts/rockchip/px30-engicam-common.dtsi | 39 +++
.../dts/rockchip/px30-engicam-ctouch2.dtsi | 8 +
.../dts/rockchip/px30-engicam-edimm2.2.dtsi | 7 +
.../dts/rockchip/px30-px30-core-ctouch2.dts | 22 ++
.../dts/rockchip/px30-px30-core-edimm2.2.dts | 21 ++
.../boot/dts/rockchip/px30-px30-core.dtsi | 232 ++++++++++++++++++
8 files changed, 343 insertions(+)
create mode 100644 arch/arm64/boot/dts/rockchip/px30-engicam-common.dtsi
create mode 100644 arch/arm64/boot/dts/rockchip/px30-engicam-ctouch2.dtsi
create mode 100644 arch/arm64/boot/dts/rockchip/px30-engicam-edimm2.2.dtsi
create mode 100644 arch/arm64/boot/dts/rockchip/px30-px30-core-ctouch2.dts
create mode 100644 arch/arm64/boot/dts/rockchip/px30-px30-core-edimm2.2.dts
create mode 100644 arch/arm64/boot/dts/rockchip/px30-px30-core.dtsi
--
2.25.1
PX30.Core is an EDIMM SOM based on Rockchip PX30 from Engicam.
EDIMM2.2 Starter Kit is an EDIMM 2.2 Form Factor Capacitive
Evaluation Board from Engicam.
PX30.Core needs to mount on top of this Evaluation board for
creating complete PX30.Core EDIMM2.2 Starter Kit.
Add bindings for it.
Signed-off-by: Jagan Teki <[email protected]>
Acked-by: Rob Herring <[email protected]>
---
Changes for v4, v3:
- none
Changes for v2:
- collect Rob A-b
Documentation/devicetree/bindings/arm/rockchip.yaml | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/Documentation/devicetree/bindings/arm/rockchip.yaml b/Documentation/devicetree/bindings/arm/rockchip.yaml
index 7025d00c06cc..bda0f2781890 100644
--- a/Documentation/devicetree/bindings/arm/rockchip.yaml
+++ b/Documentation/devicetree/bindings/arm/rockchip.yaml
@@ -70,6 +70,12 @@ properties:
- const: elgin,rv1108-r1
- const: rockchip,rv1108
+ - description: Engicam PX30.Core EDIMM2.2 Starter Kit
+ items:
+ - const: engicam,px30-core-edimm2.2
+ - const: engicam,px30-px30-core
+ - const: rockchip,px30
+
- description: Firefly Firefly-RK3288
items:
- enum:
--
2.25.1
Engicam EDIMM2.2 Starter Kit is an EDIMM 2.2 Form Factor Capacitive
Evaluation Board.
Genaral features:
- LCD 7" C.Touch
- microSD slot
- Ethernet 1Gb
- Wifi/BT
- 2x LVDS Full HD interfaces
- 3x USB 2.0
- 1x USB 3.0
- HDMI Out
- Mini PCIe
- MIPI CSI
- 2x CAN
- Audio Out
SOM's like PX30.Core needs to mount on top of this Evaluation board
for creating complete PX30.Core EDIMM2.2 Starter Kit.
Add support for it.
Signed-off-by: Jagan Teki <[email protected]>
Signed-off-by: Michael Trimarchi <[email protected]>
---
Changes for v4:
- none
Changes for v3:
- sort regulator nodes properties
- drop cap-mmc-highspeed property
- add Amarula Solutions copyright
Changes for v2:
- move carrier enablement nodes in carrier dtsi
.../dts/rockchip/px30-engicam-common.dtsi | 39 +++++++++++++++++++
.../dts/rockchip/px30-engicam-edimm2.2.dtsi | 7 ++++
2 files changed, 46 insertions(+)
create mode 100644 arch/arm64/boot/dts/rockchip/px30-engicam-common.dtsi
create mode 100644 arch/arm64/boot/dts/rockchip/px30-engicam-edimm2.2.dtsi
diff --git a/arch/arm64/boot/dts/rockchip/px30-engicam-common.dtsi b/arch/arm64/boot/dts/rockchip/px30-engicam-common.dtsi
new file mode 100644
index 000000000000..bd5bde989e8d
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/px30-engicam-common.dtsi
@@ -0,0 +1,39 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2020 Engicam srl
+ * Copyright (c) 2020 Amarula Solutions
+ * Copyright (c) 2020 Amarula Solutions(India)
+ */
+
+/ {
+ vcc5v0_sys: vcc5v0-sys {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc5v0_sys"; /* +5V */
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ };
+};
+
+&gmac {
+ clock_in_out = "output";
+ phy-supply = <&vcc_3v3>; /* +3V3_SOM */
+ snps,reset-active-low;
+ snps,reset-delays-us = <0 50000 50000>;
+ snps,reset-gpio = <&gpio2 RK_PB5 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+};
+
+&sdmmc {
+ cap-sd-highspeed;
+ card-detect-delay = <800>;
+ vmmc-supply = <&vcc_3v3>; /* +3V3_SOM */
+ vqmmc-supply = <&vcc_3v3>;
+ status = "okay";
+};
+
+&uart2 {
+ pinctrl-0 = <&uart2m1_xfer>;
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/rockchip/px30-engicam-edimm2.2.dtsi b/arch/arm64/boot/dts/rockchip/px30-engicam-edimm2.2.dtsi
new file mode 100644
index 000000000000..cb00988953e9
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/px30-engicam-edimm2.2.dtsi
@@ -0,0 +1,7 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2020 Engicam srl
+ * Copyright (c) 2020 Amarula Solutions(India)
+ */
+
+#include "px30-engicam-common.dtsi"
--
2.25.1
From: Michael Trimarchi <[email protected]>
PX30.Core is an EDIMM SOM based on Rockchip PX30 from Engicam.
General features:
- Rockchip PX30
- Up to 2GB DDR4
- eMMC 4 GB expandible
- rest of PX30 features
PX30.Core needs to mount on top of Engicam baseboards for creating
complete platform boards.
Possible baseboards are,
- EDIMM2.2
- C.TOUCH 2.0
Add support for it.
Signed-off-by: Jagan Teki <[email protected]>
Signed-off-by: Michael Trimarchi <[email protected]>
---
Changes for v4:
- none
Changes for v3:
- sort regulator nodes properties
- add Amarula Solutions copyright
- update the patch author
Changes for v2:
- none
.../boot/dts/rockchip/px30-px30-core.dtsi | 232 ++++++++++++++++++
1 file changed, 232 insertions(+)
create mode 100644 arch/arm64/boot/dts/rockchip/px30-px30-core.dtsi
diff --git a/arch/arm64/boot/dts/rockchip/px30-px30-core.dtsi b/arch/arm64/boot/dts/rockchip/px30-px30-core.dtsi
new file mode 100644
index 000000000000..16e6cf28a440
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/px30-px30-core.dtsi
@@ -0,0 +1,232 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2020 Fuzhou Rockchip Electronics Co., Ltd
+ * Copyright (c) 2020 Engicam srl
+ * Copyright (c) 2020 Amarula Solutons
+ * Copyright (c) 2020 Amarula Solutons(India)
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+
+/ {
+ compatible = "engicam,px30-px30-core", "rockchip,px30";
+};
+
+&cpu0 {
+ cpu-supply = <&vdd_arm>;
+};
+
+&cpu1 {
+ cpu-supply = <&vdd_arm>;
+};
+
+&cpu2 {
+ cpu-supply = <&vdd_arm>;
+};
+
+&cpu3 {
+ cpu-supply = <&vdd_arm>;
+};
+
+&emmc {
+ cap-mmc-highspeed;
+ mmc-hs200-1_8v;
+ non-removable;
+ status = "okay";
+};
+
+&i2c0 {
+ status = "okay";
+
+ rk809: pmic@20 {
+ compatible = "rockchip,rk809";
+ reg = <0x20>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <RK_PA7 IRQ_TYPE_LEVEL_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pmic_int>;
+ rockchip,system-power-controller;
+ wakeup-source;
+ #clock-cells = <1>;
+ clock-output-names = "rk808-clkout1", "rk808-clkout2";
+
+ vcc1-supply = <&vcc5v0_sys>;
+ vcc2-supply = <&vcc5v0_sys>;
+ vcc3-supply = <&vcc5v0_sys>;
+ vcc4-supply = <&vcc5v0_sys>;
+ vcc5-supply = <&vcc3v3_sys>;
+ vcc6-supply = <&vcc3v3_sys>;
+ vcc7-supply = <&vcc3v3_sys>;
+ vcc8-supply = <&vcc3v3_sys>;
+ vcc9-supply = <&vcc5v0_sys>;
+
+ regulators {
+ vdd_log: DCDC_REG1 {
+ regulator-name = "vdd_log";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <950000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-ramp-delay = <6001>;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <950000>;
+ };
+ };
+
+ vdd_arm: DCDC_REG2 {
+ regulator-name = "vdd_arm";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <950000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-ramp-delay = <6001>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ regulator-suspend-microvolt = <950000>;
+ };
+ };
+
+ vcc_ddr: DCDC_REG3 {
+ regulator-name = "vcc_ddr";
+ regulator-always-on;
+ regulator-boot-on;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
+ };
+
+ vcc_3v3: DCDC_REG4 {
+ regulator-name = "vcc_3v3";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <3300000>;
+ };
+ };
+
+ vcc3v3_sys: DCDC_REG5 {
+ regulator-name = "vcc3v3_sys";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <3300000>;
+ };
+ };
+
+ vcc_1v0: LDO_REG1 {
+ regulator-name = "vcc_1v0";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1000000>;
+ };
+ };
+
+ vcc_1v8: LDO_REG2 {
+ regulator-name = "vcc_1v8";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ };
+ };
+
+ vdd_1v0: LDO_REG3 {
+ regulator-name = "vdd_1v0";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1000000>;
+ };
+ };
+
+ vcc3v0_pmu: LDO_REG4 {
+ regulator-name = "vcc3v0_pmu";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <3300000>;
+
+ };
+ };
+
+ vccio_sd: LDO_REG5 {
+ regulator-name = "vccio_sd";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <3300000>;
+ };
+ };
+
+ vcc5v0_host: SWITCH_REG2 {
+ regulator-name = "vcc5v0_host";
+ regulator-always-on;
+ regulator-boot-on;
+ };
+ };
+ };
+};
+
+&io_domains {
+ vccio1-supply = <&vcc_3v3>;
+ vccio2-supply = <&vcc_3v3>;
+ vccio3-supply = <&vcc_3v3>;
+ vccio4-supply = <&vcc_3v3>;
+ vccio5-supply = <&vcc_3v3>;
+ vccio6-supply = <&vcc_1v8>;
+ status = "okay";
+};
+
+&pinctrl {
+ pmic {
+ pmic_int: pmic_int {
+ rockchip,pins = <0 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+};
+
+&pmu_io_domains {
+ pmuio1-supply = <&vcc_3v3>;
+ pmuio2-supply = <&vcc_3v3>;
+ status = "okay";
+};
+
+&tsadc {
+ rockchip,hw-tshut-mode = <1>;
+ rockchip,hw-tshut-polarity = <1>;
+ status = "okay";
+};
--
2.25.1
PX30.Core is an EDIMM SOM based on Rockchip PX30 from Engicam.
C.TOUCH 2.0 is a general purpose carrier board with capacitive
touch interface support.
PX30.Core needs to mount on top of this Carrier board for creating
complete PX30.Core C.TOUCH 2.0 board.
Add bindings for it.
Signed-off-by: Jagan Teki <[email protected]>
Acked-by: Rob Herring <[email protected]>
---
Changes for v4:
- collect Rob Acked-by
Changes for v3:
- none
Changes for v2:
- new patch
Documentation/devicetree/bindings/arm/rockchip.yaml | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/Documentation/devicetree/bindings/arm/rockchip.yaml b/Documentation/devicetree/bindings/arm/rockchip.yaml
index bda0f2781890..3aecb1241492 100644
--- a/Documentation/devicetree/bindings/arm/rockchip.yaml
+++ b/Documentation/devicetree/bindings/arm/rockchip.yaml
@@ -70,6 +70,12 @@ properties:
- const: elgin,rv1108-r1
- const: rockchip,rv1108
+ - description: Engicam PX30.Core C.TOUCH 2.0
+ items:
+ - const: engicam,px30-core-ctouch2
+ - const: engicam,px30-px30-core
+ - const: rockchip,px30
+
- description: Engicam PX30.Core EDIMM2.2 Starter Kit
items:
- const: engicam,px30-core-edimm2.2
--
2.25.1
PX30.Core is an EDIMM SOM based on Rockchip PX30 from Engicam.
EDIMM2.2 Starter Kit is an EDIMM 2.2 Form Factor Capacitive
Evaluation Board from Engicam.
PX30.Core needs to mount on top of this Evaluation board for
creating complete PX30.Core EDIMM2.2 Starter Kit.
Add support for it.
Signed-off-by: Jagan Teki <[email protected]>
---
Changes for v4, v3, v2:
- none
arch/arm64/boot/dts/rockchip/Makefile | 1 +
.../dts/rockchip/px30-px30-core-edimm2.2.dts | 21 +++++++++++++++++++
2 files changed, 22 insertions(+)
create mode 100644 arch/arm64/boot/dts/rockchip/px30-px30-core-edimm2.2.dts
diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile
index 02cdb3c4a6c1..65116fcb7368 100644
--- a/arch/arm64/boot/dts/rockchip/Makefile
+++ b/arch/arm64/boot/dts/rockchip/Makefile
@@ -1,5 +1,6 @@
# SPDX-License-Identifier: GPL-2.0
dtb-$(CONFIG_ARCH_ROCKCHIP) += px30-evb.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += px30-px30-core-edimm2.2.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3308-evb.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3308-roc-cc.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3326-odroid-go2.dtb
diff --git a/arch/arm64/boot/dts/rockchip/px30-px30-core-edimm2.2.dts b/arch/arm64/boot/dts/rockchip/px30-px30-core-edimm2.2.dts
new file mode 100644
index 000000000000..c36280ce7fc7
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/px30-px30-core-edimm2.2.dts
@@ -0,0 +1,21 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2020 Fuzhou Rockchip Electronics Co., Ltd
+ * Copyright (c) 2020 Engicam srl
+ * Copyright (c) 2020 Amarula Solutions(India)
+ */
+
+/dts-v1/;
+#include "px30.dtsi"
+#include "px30-engicam-edimm2.2.dtsi"
+#include "px30-px30-core.dtsi"
+
+/ {
+ model = "Engicam PX30.Core EDIMM2.2 Starter Kit";
+ compatible = "engicam,px30-core-edimm2.2", "engicam,px30-px30-core",
+ "rockchip,px30";
+
+ chosen {
+ stdout-path = "serial2:115200n8";
+ };
+};
--
2.25.1
Engicam C.TOUCH 2.0 is an EDIMM compliant general purpose
carrier board with capacitive touch interface.
Genaral features:
- TFT 10.1" industrial, 1280x800 LVDS display
- Ethernet 10/100
- Wifi/BT
- USB Type A/OTG
- Audio Out
- CAN
- LVDS panel connector
SOM's like PX30.Core needs to mount on top of this Carrier board
for creating complete PX30.Core C.TOUCH 2.0 board.
Add support for it.
Signed-off-by: Jagan Teki <[email protected]>
Signed-off-by: Michael Trimarchi <[email protected]>
---
Changes for v4:
- none
Changes for v3:
- add Amarula Solutions copyright
Changes for v2:
- none
arch/arm64/boot/dts/rockchip/px30-engicam-ctouch2.dtsi | 8 ++++++++
1 file changed, 8 insertions(+)
create mode 100644 arch/arm64/boot/dts/rockchip/px30-engicam-ctouch2.dtsi
diff --git a/arch/arm64/boot/dts/rockchip/px30-engicam-ctouch2.dtsi b/arch/arm64/boot/dts/rockchip/px30-engicam-ctouch2.dtsi
new file mode 100644
index 000000000000..58425b1e559f
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/px30-engicam-ctouch2.dtsi
@@ -0,0 +1,8 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2020 Engicam srl
+ * Copyright (c) 2020 Amarula Solutions
+ * Copyright (c) 2020 Amarula Solutions(India)
+ */
+
+#include "px30-engicam-common.dtsi"
--
2.25.1
PX30.Core is an EDIMM SOM based on Rockchip PX30 from Engicam.
C.TOUCH 2.0 is a general purpose carrier board with capacitive
touch interface support.
PX30.Core needs to mount on top of this Carrier board for creating
complete PX30.Core C.TOUCH 2.0 board.
Add support for it.
Signed-off-by: Jagan Teki <[email protected]>
Signed-off-by: Michael Trimarchi <[email protected]>
---
Changes for v4:
- new patch
Changes for v3:
- add Amarula Solutions copyright
Changes for v2:
- new patch
arch/arm64/boot/dts/rockchip/Makefile | 1 +
.../dts/rockchip/px30-px30-core-ctouch2.dts | 22 +++++++++++++++++++
2 files changed, 23 insertions(+)
create mode 100644 arch/arm64/boot/dts/rockchip/px30-px30-core-ctouch2.dts
diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile
index 65116fcb7368..958eb57e403a 100644
--- a/arch/arm64/boot/dts/rockchip/Makefile
+++ b/arch/arm64/boot/dts/rockchip/Makefile
@@ -1,5 +1,6 @@
# SPDX-License-Identifier: GPL-2.0
dtb-$(CONFIG_ARCH_ROCKCHIP) += px30-evb.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += px30-px30-core-ctouch2.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += px30-px30-core-edimm2.2.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3308-evb.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3308-roc-cc.dtb
diff --git a/arch/arm64/boot/dts/rockchip/px30-px30-core-ctouch2.dts b/arch/arm64/boot/dts/rockchip/px30-px30-core-ctouch2.dts
new file mode 100644
index 000000000000..2da01281883a
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/px30-px30-core-ctouch2.dts
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2020 Fuzhou Rockchip Electronics Co., Ltd
+ * Copyright (c) 2020 Engicam srl
+ * Copyright (c) 2020 Amarula Solutions
+ * Copyright (c) 2020 Amarula Solutions(India)
+ */
+
+/dts-v1/;
+#include "px30.dtsi"
+#include "px30-engicam-ctouch2.dtsi"
+#include "px30-px30-core.dtsi"
+
+/ {
+ model = "Engicam PX30.Core C.TOUCH 2.0";
+ compatible = "engicam,px30-core-ctouch2", "engicam,px30-px30-core",
+ "rockchip,px30";
+
+ chosen {
+ stdout-path = "serial2:115200n8";
+ };
+};
--
2.25.1
Hi Heiko,
On Tue, Sep 29, 2020 at 2:02 PM Jagan Teki <[email protected]> wrote:
>
> PX30.Core is an EDIMM SOM based on Rockchip PX30 from Engicam.
>
> PX30.Core needs to mount on top of Engicam baseboards for creating
> complete platform boards.
>
> Possible baseboards are,
> - EDIMM2.2 Starter Kit
> - C.TOUCH 2.0 Carrier Board
>
> Changes for v4:
> - collect Rob A-b
> Changes for v3:
> - resolved Johan comments about sorting node properties
> - add copyright to Amarula Solutions
> - update px30 dtsi author
> Changes for v2:
> - include C.TOUCH 2.0 carrier board
> - skip 10" OF LCD as it requires separate dts with panel support.
>
> Note: These baseboards can be used for i.MX8 SOM's as well. So having
> baseboard on respective SoC seems to be easy rather than making it
> common across all.
>
> Any inputs?
> Jagan.
>
> Jagan Teki (6):
> dt-bindings: arm: rockchip: Add Engicam PX30.Core EDIMM2.2 Starter Kit
> arm64: dts: rockchip: px30: Add Engicam EDIMM2.2 Starter Kit
> arm64: dts: rockchip: Add Engicam PX30.Core EDIMM2.2 Starter Kit
> dt-bindings: arm: rockchip: Add Engicam PX30.Core C.TOUCH 2.0
> arm64: dts: rockchip: px30: Add Engicam C.TOUCH 2.0
> arm64: dts: rockchip: Add Engicam PX30.Core C.TOUCH 2.0
>
> Michael Trimarchi (1):
> arm64: dts: rockchip: Add Engicam PX30.Core SOM
>
> .../devicetree/bindings/arm/rockchip.yaml | 12 +
> arch/arm64/boot/dts/rockchip/Makefile | 2 +
> .../dts/rockchip/px30-engicam-common.dtsi | 39 +++
> .../dts/rockchip/px30-engicam-ctouch2.dtsi | 8 +
> .../dts/rockchip/px30-engicam-edimm2.2.dtsi | 7 +
> .../dts/rockchip/px30-px30-core-ctouch2.dts | 22 ++
> .../dts/rockchip/px30-px30-core-edimm2.2.dts | 21 ++
> .../boot/dts/rockchip/px30-px30-core.dtsi | 232 ++++++++++++++++++
> 8 files changed, 343 insertions(+)
> create mode 100644 arch/arm64/boot/dts/rockchip/px30-engicam-common.dtsi
> create mode 100644 arch/arm64/boot/dts/rockchip/px30-engicam-ctouch2.dtsi
> create mode 100644 arch/arm64/boot/dts/rockchip/px30-engicam-edimm2.2.dtsi
> create mode 100644 arch/arm64/boot/dts/rockchip/px30-px30-core-ctouch2.dts
> create mode 100644 arch/arm64/boot/dts/rockchip/px30-px30-core-edimm2.2.dts
> create mode 100644 arch/arm64/boot/dts/rockchip/px30-px30-core.dtsi
Any further comments?
Jagan.
Am Mittwoch, 4. November 2020, 20:54:40 CET schrieb Jagan Teki:
> On Thu, Oct 22, 2020 at 12:27 AM Jagan Teki <[email protected]> wrote:
> >
> > Hi Heiko,
> >
> > On Tue, Sep 29, 2020 at 2:02 PM Jagan Teki <[email protected]> wrote:
> > >
> > > PX30.Core is an EDIMM SOM based on Rockchip PX30 from Engicam.
> > >
> > > PX30.Core needs to mount on top of Engicam baseboards for creating
> > > complete platform boards.
> > >
> > > Possible baseboards are,
> > > - EDIMM2.2 Starter Kit
> > > - C.TOUCH 2.0 Carrier Board
> > >
> > > Changes for v4:
> > > - collect Rob A-b
> > > Changes for v3:
> > > - resolved Johan comments about sorting node properties
> > > - add copyright to Amarula Solutions
> > > - update px30 dtsi author
> > > Changes for v2:
> > > - include C.TOUCH 2.0 carrier board
> > > - skip 10" OF LCD as it requires separate dts with panel support.
> > >
> > > Note: These baseboards can be used for i.MX8 SOM's as well. So having
> > > baseboard on respective SoC seems to be easy rather than making it
> > > common across all.
> > >
> > > Any inputs?
> > > Jagan.
> > >
> > > Jagan Teki (6):
> > > dt-bindings: arm: rockchip: Add Engicam PX30.Core EDIMM2.2 Starter Kit
> > > arm64: dts: rockchip: px30: Add Engicam EDIMM2.2 Starter Kit
> > > arm64: dts: rockchip: Add Engicam PX30.Core EDIMM2.2 Starter Kit
> > > dt-bindings: arm: rockchip: Add Engicam PX30.Core C.TOUCH 2.0
> > > arm64: dts: rockchip: px30: Add Engicam C.TOUCH 2.0
> > > arm64: dts: rockchip: Add Engicam PX30.Core C.TOUCH 2.0
> > >
> > > Michael Trimarchi (1):
> > > arm64: dts: rockchip: Add Engicam PX30.Core SOM
> > >
> > > .../devicetree/bindings/arm/rockchip.yaml | 12 +
> > > arch/arm64/boot/dts/rockchip/Makefile | 2 +
> > > .../dts/rockchip/px30-engicam-common.dtsi | 39 +++
> > > .../dts/rockchip/px30-engicam-ctouch2.dtsi | 8 +
> > > .../dts/rockchip/px30-engicam-edimm2.2.dtsi | 7 +
> > > .../dts/rockchip/px30-px30-core-ctouch2.dts | 22 ++
> > > .../dts/rockchip/px30-px30-core-edimm2.2.dts | 21 ++
> > > .../boot/dts/rockchip/px30-px30-core.dtsi | 232 ++++++++++++++++++
> > > 8 files changed, 343 insertions(+)
> > > create mode 100644 arch/arm64/boot/dts/rockchip/px30-engicam-common.dtsi
> > > create mode 100644 arch/arm64/boot/dts/rockchip/px30-engicam-ctouch2.dtsi
> > > create mode 100644 arch/arm64/boot/dts/rockchip/px30-engicam-edimm2.2.dtsi
> > > create mode 100644 arch/arm64/boot/dts/rockchip/px30-px30-core-ctouch2.dts
> > > create mode 100644 arch/arm64/boot/dts/rockchip/px30-px30-core-edimm2.2.dts
> > > create mode 100644 arch/arm64/boot/dts/rockchip/px30-px30-core.dtsi
> >
> > Any further comments?
>
> Gentle ping.
on my list to untangle :-)
Heiko
On Thu, Oct 22, 2020 at 12:27 AM Jagan Teki <[email protected]> wrote:
>
> Hi Heiko,
>
> On Tue, Sep 29, 2020 at 2:02 PM Jagan Teki <[email protected]> wrote:
> >
> > PX30.Core is an EDIMM SOM based on Rockchip PX30 from Engicam.
> >
> > PX30.Core needs to mount on top of Engicam baseboards for creating
> > complete platform boards.
> >
> > Possible baseboards are,
> > - EDIMM2.2 Starter Kit
> > - C.TOUCH 2.0 Carrier Board
> >
> > Changes for v4:
> > - collect Rob A-b
> > Changes for v3:
> > - resolved Johan comments about sorting node properties
> > - add copyright to Amarula Solutions
> > - update px30 dtsi author
> > Changes for v2:
> > - include C.TOUCH 2.0 carrier board
> > - skip 10" OF LCD as it requires separate dts with panel support.
> >
> > Note: These baseboards can be used for i.MX8 SOM's as well. So having
> > baseboard on respective SoC seems to be easy rather than making it
> > common across all.
> >
> > Any inputs?
> > Jagan.
> >
> > Jagan Teki (6):
> > dt-bindings: arm: rockchip: Add Engicam PX30.Core EDIMM2.2 Starter Kit
> > arm64: dts: rockchip: px30: Add Engicam EDIMM2.2 Starter Kit
> > arm64: dts: rockchip: Add Engicam PX30.Core EDIMM2.2 Starter Kit
> > dt-bindings: arm: rockchip: Add Engicam PX30.Core C.TOUCH 2.0
> > arm64: dts: rockchip: px30: Add Engicam C.TOUCH 2.0
> > arm64: dts: rockchip: Add Engicam PX30.Core C.TOUCH 2.0
> >
> > Michael Trimarchi (1):
> > arm64: dts: rockchip: Add Engicam PX30.Core SOM
> >
> > .../devicetree/bindings/arm/rockchip.yaml | 12 +
> > arch/arm64/boot/dts/rockchip/Makefile | 2 +
> > .../dts/rockchip/px30-engicam-common.dtsi | 39 +++
> > .../dts/rockchip/px30-engicam-ctouch2.dtsi | 8 +
> > .../dts/rockchip/px30-engicam-edimm2.2.dtsi | 7 +
> > .../dts/rockchip/px30-px30-core-ctouch2.dts | 22 ++
> > .../dts/rockchip/px30-px30-core-edimm2.2.dts | 21 ++
> > .../boot/dts/rockchip/px30-px30-core.dtsi | 232 ++++++++++++++++++
> > 8 files changed, 343 insertions(+)
> > create mode 100644 arch/arm64/boot/dts/rockchip/px30-engicam-common.dtsi
> > create mode 100644 arch/arm64/boot/dts/rockchip/px30-engicam-ctouch2.dtsi
> > create mode 100644 arch/arm64/boot/dts/rockchip/px30-engicam-edimm2.2.dtsi
> > create mode 100644 arch/arm64/boot/dts/rockchip/px30-px30-core-ctouch2.dts
> > create mode 100644 arch/arm64/boot/dts/rockchip/px30-px30-core-edimm2.2.dts
> > create mode 100644 arch/arm64/boot/dts/rockchip/px30-px30-core.dtsi
>
> Any further comments?
Gentle ping.
Hi,
Am Dienstag, 29. September 2020, 10:32:10 CET schrieb Jagan Teki:
> PX30.Core is an EDIMM SOM based on Rockchip PX30 from Engicam.
>
> PX30.Core needs to mount on top of Engicam baseboards for creating
> complete platform boards.
>
> Possible baseboards are,
> - EDIMM2.2 Starter Kit
> - C.TOUCH 2.0 Carrier Board
>
> Changes for v4:
> - collect Rob A-b
> Changes for v3:
> - resolved Johan comments about sorting node properties
> - add copyright to Amarula Solutions
> - update px30 dtsi author
> Changes for v2:
> - include C.TOUCH 2.0 carrier board
> - skip 10" OF LCD as it requires separate dts with panel support.
>
> Note: These baseboards can be used for i.MX8 SOM's as well. So having
> baseboard on respective SoC seems to be easy rather than making it
> common across all.
>
> Any inputs?
> Jagan.
>
> Jagan Teki (6):
> dt-bindings: arm: rockchip: Add Engicam PX30.Core EDIMM2.2 Starter Kit
> arm64: dts: rockchip: px30: Add Engicam EDIMM2.2 Starter Kit
> arm64: dts: rockchip: Add Engicam PX30.Core EDIMM2.2 Starter Kit
> dt-bindings: arm: rockchip: Add Engicam PX30.Core C.TOUCH 2.0
> arm64: dts: rockchip: px30: Add Engicam C.TOUCH 2.0
> arm64: dts: rockchip: Add Engicam PX30.Core C.TOUCH 2.0
>
> Michael Trimarchi (1):
> arm64: dts: rockchip: Add Engicam PX30.Core SOM
I've applied the patches for 5.11 with some changes:
(1) engicam,px30-px30-core became engicam,px30-core
(2) px30-px30-core.dtsi became px30-engicam-px30-core.dtsi
That double px30 is unnecessary and confusing in compatibles
and the px30-core thingy needed something less generic, as that is
not px30-specific but specific to the engicam boards.
Heiko
On Mon, Nov 9, 2020 at 4:45 AM Heiko Stuebner <[email protected]> wrote:
>
> Hi,
>
> Am Dienstag, 29. September 2020, 10:32:10 CET schrieb Jagan Teki:
> > PX30.Core is an EDIMM SOM based on Rockchip PX30 from Engicam.
> >
> > PX30.Core needs to mount on top of Engicam baseboards for creating
> > complete platform boards.
> >
> > Possible baseboards are,
> > - EDIMM2.2 Starter Kit
> > - C.TOUCH 2.0 Carrier Board
> >
> > Changes for v4:
> > - collect Rob A-b
> > Changes for v3:
> > - resolved Johan comments about sorting node properties
> > - add copyright to Amarula Solutions
> > - update px30 dtsi author
> > Changes for v2:
> > - include C.TOUCH 2.0 carrier board
> > - skip 10" OF LCD as it requires separate dts with panel support.
> >
> > Note: These baseboards can be used for i.MX8 SOM's as well. So having
> > baseboard on respective SoC seems to be easy rather than making it
> > common across all.
> >
> > Any inputs?
> > Jagan.
> >
> > Jagan Teki (6):
> > dt-bindings: arm: rockchip: Add Engicam PX30.Core EDIMM2.2 Starter Kit
> > arm64: dts: rockchip: px30: Add Engicam EDIMM2.2 Starter Kit
> > arm64: dts: rockchip: Add Engicam PX30.Core EDIMM2.2 Starter Kit
> > dt-bindings: arm: rockchip: Add Engicam PX30.Core C.TOUCH 2.0
> > arm64: dts: rockchip: px30: Add Engicam C.TOUCH 2.0
> > arm64: dts: rockchip: Add Engicam PX30.Core C.TOUCH 2.0
> >
> > Michael Trimarchi (1):
> > arm64: dts: rockchip: Add Engicam PX30.Core SOM
>
> I've applied the patches for 5.11 with some changes:
> (1) engicam,px30-px30-core became engicam,px30-core
> (2) px30-px30-core.dtsi became px30-engicam-px30-core.dtsi
>
> That double px30 is unnecessary and confusing in compatibles
> and the px30-core thingy needed something less generic, as that is
> not px30-specific but specific to the engicam boards.
Agreed with the updates and thanks for picking up.
Other than these few patches around the mailing list, let me know
your comments, thanks!
https://patchwork.kernel.org/project/linux-arm-kernel/patch/[email protected]/
https://patchwork.kernel.org/project/linux-arm-kernel/patch/[email protected]/
Jagan.