2005-10-11 19:09:36

by Thomas Voegtle

[permalink] [raw]
Subject: bttv card after swsusp dead


Hi,


with 2.6.13 I could after a software suspend use my bttv card. This is not
possible aynmore with 2.6.14-rc3 and 2.6.14-rc4.

dmesg part of 2.6.13:

ACPI: PCI Interrupt 0000:01:04.0[A] -> Link [LNKA] -> GSI 11 (level, low)
-> IRQ 11
bttv0: reset, reinitialize
bttv0: PLL: 28636363 => 35468950 . ok



and now with 2.6.14-rc3/4:


ACPI: PCI Interrupt 0000:01:04.0[A] -> Link [LNKA] -> GSI 11 (level, low)
-> IRQ 11
ACPI: PCI interrupt for device 0000:01:04.0 disabled
bttv0: Can't enable device.
ACPI: PCI Interrupt 0000:01:04.1[A] -> Link [LNKA] -> GSI 11 (level, low)
-> IRQ 11



Thomas

--
Thomas V?gtle email: [email protected]
----- http://www.voegtle-clan.de/thomas ------


2005-10-12 11:34:15

by Pavel Machek

[permalink] [raw]
Subject: Re: bttv card after swsusp dead

Hi!

> with 2.6.13 I could after a software suspend use my bttv card. This is not
> possible aynmore with 2.6.14-rc3 and 2.6.14-rc4.
>
> dmesg part of 2.6.13:
>
> ACPI: PCI Interrupt 0000:01:04.0[A] -> Link [LNKA] -> GSI 11 (level, low)
> -> IRQ 11
> bttv0: reset, reinitialize
> bttv0: PLL: 28636363 => 35468950 . ok
>
>
>
> and now with 2.6.14-rc3/4:
>
>
> ACPI: PCI Interrupt 0000:01:04.0[A] -> Link [LNKA] -> GSI 11 (level, low)
> -> IRQ 11
> ACPI: PCI interrupt for device 0000:01:04.0 disabled
> bttv0: Can't enable device.
> ACPI: PCI Interrupt 0000:01:04.1[A] -> Link [LNKA] -> GSI 11 (level, low)
> -> IRQ 11

You probably want to ask on acpi-devel. Looks like some change in
interrupt routing broken your card..

Pavel
--
if you have sharp zaurus hardware you don't need... you know my address

2005-10-12 11:59:00

by Thomas Voegtle

[permalink] [raw]
Subject: Re: bttv card after swsusp dead

On Wed, 12 Oct 2005, Pavel Machek wrote:

> Hi!
>
> > with 2.6.13 I could after a software suspend use my bttv card. This is not
> > possible aynmore with 2.6.14-rc3 and 2.6.14-rc4.
> >
> > dmesg part of 2.6.13:
> >
> > ACPI: PCI Interrupt 0000:01:04.0[A] -> Link [LNKA] -> GSI 11 (level, low)
> > -> IRQ 11
> > bttv0: reset, reinitialize
> > bttv0: PLL: 28636363 => 35468950 . ok
> >
> >
> >
> > and now with 2.6.14-rc3/4:
> >
> >
> > ACPI: PCI Interrupt 0000:01:04.0[A] -> Link [LNKA] -> GSI 11 (level, low)
> > -> IRQ 11
> > ACPI: PCI interrupt for device 0000:01:04.0 disabled
> > bttv0: Can't enable device.
> > ACPI: PCI Interrupt 0000:01:04.1[A] -> Link [LNKA] -> GSI 11 (level, low)
> > -> IRQ 11
>
> You probably want to ask on acpi-devel. Looks like some change in
> interrupt routing broken your card..
>
> Pavel


Stupid me. Herewith resend to acpi-devel.
Thanks Pavel for the info.



Thomas

--
Thomas V?gtle email: [email protected]
----- http://www.voegtle-clan.de/thomas ------