2022-03-03 16:05:49

by Srinivasa Rao Mandadapu

Subject: [PATCH v7 2/2] dt-bindings: soundwire: qcom: Add bindings for audio clock reset control property

Update description for audio clock reset control property, which is required
for latest chipsets, to allow rx, tx and wsa bus clock enabling in software
control mode by configuring dynamic clock gating control registers.

Signed-off-by: Srinivasa Rao Mandadapu <[email protected]>
Co-developed-by: Venkata Prasad Potturu <[email protected]>
Signed-off-by: Venkata Prasad Potturu <[email protected]>
---
Documentation/devicetree/bindings/soundwire/qcom,sdw.txt | 14 ++++++++++++++
1 file changed, 14 insertions(+)

diff --git a/Documentation/devicetree/bindings/soundwire/qcom,sdw.txt b/Documentation/devicetree/bindings/soundwire/qcom,sdw.txt
index b93a2b3..32e156d 100644
--- a/Documentation/devicetree/bindings/soundwire/qcom,sdw.txt
+++ b/Documentation/devicetree/bindings/soundwire/qcom,sdw.txt
@@ -150,6 +150,18 @@ board specific bus parameters.
or applicable for the respective data port.
More info in MIPI Alliance SoundWire 1.0 Specifications.

+- reset:
+ Usage: optional
+ Value type: <prop-encoded-array>
+ Definition: Should specify the SoundWire audio CSR reset controller interface,
+ which is required for SoundWire version 1.6.0 and above.
+
+- reset-names:
+ Usage: optional
+ Value type: <stringlist>
+ Definition: should be "swr_audio_cgcr" for SoundWire audio CSR reset
+ controller interface.
+
Note:
More Information on detail of encoding of these fields can be
found in MIPI Alliance SoundWire 1.0 Specifications.
@@ -168,6 +180,8 @@ soundwire: soundwire@c85 {
interrupts = <20 IRQ_TYPE_EDGE_RISING>;
clocks = <&wcc>;
clock-names = "iface";
+ resets = <&lpass_audiocc LPASS_AUDIO_SWR_TX_CGCR>;
+ reset-names = "swr_audio_cgcr";
#sound-dai-cells = <1>;
qcom,dports-type = <0>;
qcom,dout-ports = <6>;
--
2.7.4

2022-03-04 22:49:27

by Rob Herring (Arm)

Subject: Re: [PATCH v7 2/2] dt-bindings: soundwire: qcom: Add bindings for audio clock reset control property

On Thu, 03 Mar 2022 19:32:08 +0530, Srinivasa Rao Mandadapu wrote:
> Update description for audio clock reset control property, which is required
> for latest chipsets, to allow rx, tx and wsa bus clock enabling in software
> control mode by configuring dynamic clock gating control registers.
>
> Signed-off-by: Srinivasa Rao Mandadapu <[email protected]>
> Co-developed-by: Venkata Prasad Potturu <[email protected]>
> Signed-off-by: Venkata Prasad Potturu <[email protected]>
> ---
> Documentation/devicetree/bindings/soundwire/qcom,sdw.txt | 14 ++++++++++++++
> 1 file changed, 14 insertions(+)
>

Acked-by: Rob Herring <[email protected]>

2022-03-09 00:45:22

by Stephen Boyd

Subject: Re: [PATCH v7 2/2] dt-bindings: soundwire: qcom: Add bindings for audio clock reset control property

Quoting Srinivasa Rao Mandadapu (2022-03-03 06:02:08)
> Update description for audio clock reset control property, which is required
> for latest chipsets, to allow rx, tx and wsa bus clock enabling in software
> control mode by configuring dynamic clock gating control registers.
>
> Signed-off-by: Srinivasa Rao Mandadapu <[email protected]>
> Co-developed-by: Venkata Prasad Potturu <[email protected]>
> Signed-off-by: Venkata Prasad Potturu <[email protected]>
> ---

Reviewed-by: Stephen Boyd <[email protected]>