Add missing colon in coalesce_reply_cb
Fixes: ec573f209d (netlink: settings: add netlink support for coalesce tx aggr params)
Signed-off-by: gaoxingwang <[email protected]>
Signed-off-by: gaoxingwang <[email protected]>
---
netlink/coalesce.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/netlink/coalesce.c b/netlink/coalesce.c
index bc34d3d..bb93f9b 100644
--- a/netlink/coalesce.c
+++ b/netlink/coalesce.c
@@ -93,7 +93,7 @@ int coalesce_reply_cb(const struct nlmsghdr *nlhdr, void *data)
tb[ETHTOOL_A_COALESCE_TX_AGGR_MAX_BYTES]);
show_u32("tx-aggr-max-frames", "tx-aggr-max-frames:\t",
tb[ETHTOOL_A_COALESCE_TX_AGGR_MAX_FRAMES]);
- show_u32("tx-aggr-time-usecs", "tx-aggr-time-usecs\t",
+ show_u32("tx-aggr-time-usecs", "tx-aggr-time-usecs:\t",
tb[ETHTOOL_A_COALESCE_TX_AGGR_TIME_USECS]);
show_cr();
--
2.27.0
On Fri, Mar 22, 2024 at 3:26 PM gaoxingwang <[email protected]> wrote:
>
> Add missing colon in coalesce_reply_cb
>
> Fixes: ec573f209d (netlink: settings: add netlink support for coalesce tx aggr params)
This commit cannot be found in net/net-next tree...
> Signed-off-by: gaoxingwang <[email protected]>
>
> Signed-off-by: gaoxingwang <[email protected]>
nit: two duplicated SoB
> ---
> netlink/coalesce.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/netlink/coalesce.c b/netlink/coalesce.c
> index bc34d3d..bb93f9b 100644
> --- a/netlink/coalesce.c
> +++ b/netlink/coalesce.c
Where is this file? I suspect you're not using the standard mainline?
> @@ -93,7 +93,7 @@ int coalesce_reply_cb(const struct nlmsghdr *nlhdr, void *data)
> tb[ETHTOOL_A_COALESCE_TX_AGGR_MAX_BYTES]);
> show_u32("tx-aggr-max-frames", "tx-aggr-max-frames:\t",
> tb[ETHTOOL_A_COALESCE_TX_AGGR_MAX_FRAMES]);
> - show_u32("tx-aggr-time-usecs", "tx-aggr-time-usecs\t",
> + show_u32("tx-aggr-time-usecs", "tx-aggr-time-usecs:\t",
> tb[ETHTOOL_A_COALESCE_TX_AGGR_TIME_USECS]);
> show_cr();
>
> --
> 2.27.0
>
>
On Fri, Mar 22, 2024 at 09:13:53AM +0100, Jiri Pirko wrote:
> Please make clear indication which project/tree you target with your
> patch by putting appropriate name in the [patch NAME] brackets
In this case, it should be "[PATCH ethtool]".
Michal
Fri, Mar 22, 2024 at 08:24:56AM CET, [email protected] wrote:
>Add missing colon in coalesce_reply_cb
>
>Fixes: ec573f209d (netlink: settings: add netlink support for coalesce tx aggr params)
>Signed-off-by: gaoxingwang <[email protected]>
>
>Signed-off-by: gaoxingwang <[email protected]>
>---
> netlink/coalesce.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
>diff --git a/netlink/coalesce.c b/netlink/coalesce.c
>index bc34d3d..bb93f9b 100644
>--- a/netlink/coalesce.c
>+++ b/netlink/coalesce.c
Please make clear indication which project/tree you target with your
patch by putting appropriate name in the [patch NAME] brackets
>@@ -93,7 +93,7 @@ int coalesce_reply_cb(const struct nlmsghdr *nlhdr, void *data)
> tb[ETHTOOL_A_COALESCE_TX_AGGR_MAX_BYTES]);
> show_u32("tx-aggr-max-frames", "tx-aggr-max-frames:\t",
> tb[ETHTOOL_A_COALESCE_TX_AGGR_MAX_FRAMES]);
>- show_u32("tx-aggr-time-usecs", "tx-aggr-time-usecs\t",
>+ show_u32("tx-aggr-time-usecs", "tx-aggr-time-usecs:\t",
> tb[ETHTOOL_A_COALESCE_TX_AGGR_TIME_USECS]);
> show_cr();
>
>--
>2.27.0
>
>
Fri, Mar 22, 2024 at 08:24:56AM CET, [email protected] wrote:
>Add missing colon in coalesce_reply_cb
>
>Fixes: ec573f209d (netlink: settings: add netlink support for coalesce tx aggr params)
>Signed-off-by: gaoxingwang <[email protected]>
>
>Signed-off-by: gaoxingwang <[email protected]>
Also, please make sure your name is properly formatted. "gaoxingwang"
certainly is not.
>---
> netlink/coalesce.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
>diff --git a/netlink/coalesce.c b/netlink/coalesce.c
>index bc34d3d..bb93f9b 100644
>--- a/netlink/coalesce.c
>+++ b/netlink/coalesce.c
>@@ -93,7 +93,7 @@ int coalesce_reply_cb(const struct nlmsghdr *nlhdr, void *data)
> tb[ETHTOOL_A_COALESCE_TX_AGGR_MAX_BYTES]);
> show_u32("tx-aggr-max-frames", "tx-aggr-max-frames:\t",
> tb[ETHTOOL_A_COALESCE_TX_AGGR_MAX_FRAMES]);
>- show_u32("tx-aggr-time-usecs", "tx-aggr-time-usecs\t",
>+ show_u32("tx-aggr-time-usecs", "tx-aggr-time-usecs:\t",
> tb[ETHTOOL_A_COALESCE_TX_AGGR_TIME_USECS]);
> show_cr();
>
>--
>2.27.0
>
>
On Fri, 22 Mar 2024 09:14:39 +0100 Jiri Pirko wrote:
> "gaoxingwang" certainly is not.
According to what rules? Honest question, I don't know much about
transliteration of what I guess is a Chinese name.
>> Please make clear indication which project/tree you target with your
>> patch by putting appropriate name in the [patch NAME] brackets
>
>In this case, it should be "[PATCH ethtool]".
>
>Michal
Yes, this is a commit for the ethtool project. First time contributing a patch to this project, not familiar with it yet.
Thank you all or your guidance. I'll resubmit the patch later.
Add missing colon in coalesce_reply_cb()
Fixes: ec573f209dfd (netlink: settings: add netlink support for coalesce tx aggr params)
Signed-off-by: Gao Xingwang <[email protected]>
---
netlink/coalesce.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/netlink/coalesce.c b/netlink/coalesce.c
index bc34d3d..bb93f9b 100644
--- a/netlink/coalesce.c
+++ b/netlink/coalesce.c
@@ -93,7 +93,7 @@ int coalesce_reply_cb(const struct nlmsghdr *nlhdr, void *data)
tb[ETHTOOL_A_COALESCE_TX_AGGR_MAX_BYTES]);
show_u32("tx-aggr-max-frames", "tx-aggr-max-frames:\t",
tb[ETHTOOL_A_COALESCE_TX_AGGR_MAX_FRAMES]);
- show_u32("tx-aggr-time-usecs", "tx-aggr-time-usecs\t",
+ show_u32("tx-aggr-time-usecs", "tx-aggr-time-usecs:\t",
tb[ETHTOOL_A_COALESCE_TX_AGGR_TIME_USECS]);
show_cr();
--
2.27.0
Fri, Mar 22, 2024 at 04:07:27PM CET, [email protected] wrote:
>On Fri, 22 Mar 2024 09:14:39 +0100 Jiri Pirko wrote:
>> "gaoxingwang" certainly is not.
>
>According to what rules? Honest question, I don't know much about
>transliteration of what I guess is a Chinese name.
At least capital letter would be nice :) But "Wang" looks like a surname
and therefore a space would be appropriate too.
Add missing colon in coalesce_reply_cb()
Fixes: ec573f209dfd (netlink: settings: add netlink support for coalesce tx aggr params)
Signed-off-by: Gao Xingwang <[email protected]>
---
netlink/coalesce.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/netlink/coalesce.c b/netlink/coalesce.c
index bc34d3d..bb93f9b 100644
--- a/netlink/coalesce.c
+++ b/netlink/coalesce.c
@@ -93,7 +93,7 @@ int coalesce_reply_cb(const struct nlmsghdr *nlhdr, void *data)
tb[ETHTOOL_A_COALESCE_TX_AGGR_MAX_BYTES]);
show_u32("tx-aggr-max-frames", "tx-aggr-max-frames:\t",
tb[ETHTOOL_A_COALESCE_TX_AGGR_MAX_FRAMES]);
- show_u32("tx-aggr-time-usecs", "tx-aggr-time-usecs\t",
+ show_u32("tx-aggr-time-usecs", "tx-aggr-time-usecs:\t",
tb[ETHTOOL_A_COALESCE_TX_AGGR_TIME_USECS]);
show_cr();
--
2.27.0
在 2024/4/2 下午8:16, gaoxingwang 写道:
> Add missing colon in coalesce_reply_cb()
>
> Fixes: ec573f209dfd (netlink: settings: add netlink support for coalesce tx aggr params)
> Signed-off-by: Gao Xingwang <[email protected]>
> ---
> netlink/coalesce.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/netlink/coalesce.c b/netlink/coalesce.c
> index bc34d3d..bb93f9b 100644
> --- a/netlink/coalesce.c
> +++ b/netlink/coalesce.c
> @@ -93,7 +93,7 @@ int coalesce_reply_cb(const struct nlmsghdr *nlhdr, void *data)
> tb[ETHTOOL_A_COALESCE_TX_AGGR_MAX_BYTES]);
> show_u32("tx-aggr-max-frames", "tx-aggr-max-frames:\t",
> tb[ETHTOOL_A_COALESCE_TX_AGGR_MAX_FRAMES]);
> - show_u32("tx-aggr-time-usecs", "tx-aggr-time-usecs\t",
> + show_u32("tx-aggr-time-usecs", "tx-aggr-time-usecs:\t",
> tb[ETHTOOL_A_COALESCE_TX_AGGR_TIME_USECS]);
> show_cr();
>
Reviewed-by: Heng Qi <[email protected]>