LinuxLists.cc - [PATCH v1 0/4] serial: exar: fix kbuild warnings and code style

2024-04-18 15:38:04

Subject: [PATCH v1 0/4] serial: exar: fix kbuild warnings and code style

From: Parker Newman <[email protected]>

This is a series of small patches fixing kbuilds error and code style
issues based on feedback during review of main patches.

Original patches thread:
Link: https://lore.kernel.org/linux-serial/[email protected]/

Thank you,
Parker Newman (4):
serial: exar: add missing kernel doc function parameters
serial: exar: use return dev_err_probe instead of returning error code
serial: exar: remove unneeded parenthesis
serial: exar: change port_type ternary line wrapping

drivers/tty/serial/8250/8250_exar.c | 47 +++++++++++++++--------------
1 file changed, 24 insertions(+), 23 deletions(-)

base-commit: c6795fbffc4547b40933ec368200bd4926a41b44
--
2.43.2

2024-04-18 15:38:14

by Parker Newman

[permalink] [raw]

Subject: [PATCH v1 3/4] serial: exar: remove unneeded parenthesis

From: Parker Newman <[email protected]>

Remove unneeded parenthesis from several locations.

Based on feedback from:
Link: https://lore.kernel.org/linux-serial/[email protected]

Signed-off-by: Parker Newman <[email protected]>
---
drivers/tty/serial/8250/8250_exar.c | 28 ++++++++++++++--------------
1 file changed, 14 insertions(+), 14 deletions(-)

diff --git a/drivers/tty/serial/8250/8250_exar.c b/drivers/tty/serial/8250/8250_exar.c
index 01748ddbf729..10725ad0f3ef 100644
--- a/drivers/tty/serial/8250/8250_exar.c
+++ b/drivers/tty/serial/8250/8250_exar.c
@@ -317,7 +317,7 @@ static inline u8 exar_ee_read_bit(struct exar8250 *priv)

regb = exar_read_reg(priv, UART_EXAR_REGB);

- return (regb & UART_EXAR_REGB_EEDO ? 1 : 0);
+ return regb & UART_EXAR_REGB_EEDO ? 1 : 0;
}

/**
@@ -741,18 +741,18 @@ static enum cti_port_type cti_get_port_type_xr17c15x_xr17v25x(struct exar8250 *p
break;
// 1x RS232, 1x RS422/RS485
case PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_1_1:
- port_type = (port_num == 0) ?
+ port_type = port_num == 0 ?
CTI_PORT_TYPE_RS232 : CTI_PORT_TYPE_RS422_485;
break;
// 2x RS232, 2x RS422/RS485
case PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_2_2:
- port_type = (port_num < 2) ?
+ port_type = port_num < 2 ?
CTI_PORT_TYPE_RS232 : CTI_PORT_TYPE_RS422_485;
break;
// 4x RS232, 4x RS422/RS485
case PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_4_4:
case PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_4_4_SP:
- port_type = (port_num < 4) ?
+ port_type = port_num < 4 ?
CTI_PORT_TYPE_RS232 : CTI_PORT_TYPE_RS422_485;
break;
// RS232/RS422/RS485 HW (jumper) selectable
@@ -789,12 +789,12 @@ static enum cti_port_type cti_get_port_type_xr17c15x_xr17v25x(struct exar8250 *p
break;
// 6x RS232, 2x RS422/RS485
case PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_6_2_SP:
- port_type = (port_num < 6) ?
+ port_type = port_num < 6 ?
CTI_PORT_TYPE_RS232 : CTI_PORT_TYPE_RS422_485;
break;
// 2x RS232, 6x RS422/RS485
case PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_2_6_SP:
- port_type = (port_num < 2) ?
+ port_type = port_num < 2 ?
CTI_PORT_TYPE_RS232 : CTI_PORT_TYPE_RS422_485;
break;
default:
@@ -981,10 +981,10 @@ static int cti_port_setup_xr17v35x(struct exar8250 *priv,
if (ret)
return ret;

- exar_write_reg(priv, (offset + UART_EXAR_8XMODE), 0x00);
- exar_write_reg(priv, (offset + UART_EXAR_FCTR), UART_FCTR_EXAR_TRGD);
- exar_write_reg(priv, (offset + UART_EXAR_TXTRG), 128);
- exar_write_reg(priv, (offset + UART_EXAR_RXTRG), 128);
+ exar_write_reg(priv, offset + UART_EXAR_8XMODE, 0x00);
+ exar_write_reg(priv, offset + UART_EXAR_FCTR, UART_FCTR_EXAR_TRGD);
+ exar_write_reg(priv, offset + UART_EXAR_TXTRG, 128);
+ exar_write_reg(priv, offset + UART_EXAR_RXTRG, 128);

return 0;
}
@@ -1037,10 +1037,10 @@ static int cti_port_setup_xr17v25x(struct exar8250 *priv,
if (ret)
return ret;

- exar_write_reg(priv, (offset + UART_EXAR_8XMODE), 0x00);
- exar_write_reg(priv, (offset + UART_EXAR_FCTR), UART_FCTR_EXAR_TRGD);
- exar_write_reg(priv, (offset + UART_EXAR_TXTRG), 32);
- exar_write_reg(priv, (offset + UART_EXAR_RXTRG), 32);
+ exar_write_reg(priv, offset + UART_EXAR_8XMODE, 0x00);
+ exar_write_reg(priv, offset + UART_EXAR_FCTR, UART_FCTR_EXAR_TRGD);
+ exar_write_reg(priv, offset + UART_EXAR_TXTRG, 32);
+ exar_write_reg(priv, offset + UART_EXAR_RXTRG, 32);

return 0;
}
--
2.43.2

2024-04-18 15:38:43

by Parker Newman

[permalink] [raw]

Subject: [PATCH v1 1/4] serial: exar: add missing kernel doc function parameters

From: Parker Newman <[email protected]>

Adds missing kernel doc function parameters to 3 functions.

Reported-by: kernel test robot <[email protected]>
Closes:
https://lore.kernel.org/oe-kbuild-all/[email protected]/

Signed-off-by: Parker Newman <[email protected]>
---
drivers/tty/serial/8250/8250_exar.c | 3 +++
1 file changed, 3 insertions(+)

diff --git a/drivers/tty/serial/8250/8250_exar.c b/drivers/tty/serial/8250/8250_exar.c
index 5e42558cbb01..a180741da634 100644
--- a/drivers/tty/serial/8250/8250_exar.c
+++ b/drivers/tty/serial/8250/8250_exar.c
@@ -715,6 +715,7 @@ static int cti_read_osc_freq(struct exar8250 *priv, u8 eeprom_offset)
/**
* cti_get_port_type_xr17c15x_xr17v25x() - Get port type of xr17c15x/xr17v25x
* @priv: Device's private structure
+ * @pcidev: PCI device pointer
* @port_num: Port to get type of
*
* CTI xr17c15x and xr17v25x based cards port types are based on PCI IDs.
@@ -807,6 +808,7 @@ static enum cti_port_type cti_get_port_type_xr17c15x_xr17v25x(struct exar8250 *p
/**
* cti_get_port_type_fpga() - Get the port type of a CTI FPGA card
* @priv: Device's private structure
+ * @pcidev: PCI device pointer
* @port_num: Port to get type of
*
* FPGA based cards port types are based on PCI IDs.
@@ -836,6 +838,7 @@ static enum cti_port_type cti_get_port_type_fpga(struct exar8250 *priv,
/**
* cti_get_port_type_xr17v35x() - Read port type from the EEPROM
* @priv: Device's private structure
+ * @pcidev: PCI device pointer
* @port_num: port offset
*
* CTI XR17V35X based cards have the port types stored in the EEPROM.
--
2.43.2

2024-04-18 15:39:11

by Parker Newman

[permalink] [raw]

Subject: [PATCH v1 4/4] serial: exar: change port_type ternary line wrapping

From: Parker Newman <[email protected]>

Change line wrapping of ternary operators in
cti_get_port_type_xr17c15x_xr17v25x() for better readability.

Old example:

port_type = port_num == 0 ?
CTI_PORT_TYPE_RS232 : CTI_PORT_TYPE_RS422_485;

New:
port_type = port_num == 0 ? CTI_PORT_TYPE_RS232 :
CTI_PORT_TYPE_RS422_485;

Based on feedback from:
Link: https://lore.kernel.org/linux-serial/[email protected]

Signed-off-by: Parker Newman <[email protected]>
---
drivers/tty/serial/8250/8250_exar.c | 20 ++++++++++----------
1 file changed, 10 insertions(+), 10 deletions(-)

diff --git a/drivers/tty/serial/8250/8250_exar.c b/drivers/tty/serial/8250/8250_exar.c
index 10725ad0f3ef..a76b4e5bab4e 100644
--- a/drivers/tty/serial/8250/8250_exar.c
+++ b/drivers/tty/serial/8250/8250_exar.c
@@ -741,19 +741,19 @@ static enum cti_port_type cti_get_port_type_xr17c15x_xr17v25x(struct exar8250 *p
break;
// 1x RS232, 1x RS422/RS485
case PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_1_1:
- port_type = port_num == 0 ?
- CTI_PORT_TYPE_RS232 : CTI_PORT_TYPE_RS422_485;
+ port_type = port_num == 0 ? CTI_PORT_TYPE_RS232 :
+ CTI_PORT_TYPE_RS422_485;
break;
// 2x RS232, 2x RS422/RS485
case PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_2_2:
- port_type = port_num < 2 ?
- CTI_PORT_TYPE_RS232 : CTI_PORT_TYPE_RS422_485;
+ port_type = port_num < 2 ? CTI_PORT_TYPE_RS232 :
+ CTI_PORT_TYPE_RS422_485;
break;
// 4x RS232, 4x RS422/RS485
case PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_4_4:
case PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_4_4_SP:
- port_type = port_num < 4 ?
- CTI_PORT_TYPE_RS232 : CTI_PORT_TYPE_RS422_485;
+ port_type = port_num < 4 ? CTI_PORT_TYPE_RS232 :
+ CTI_PORT_TYPE_RS422_485;
break;
// RS232/RS422/RS485 HW (jumper) selectable
case PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_2:
@@ -789,13 +789,13 @@ static enum cti_port_type cti_get_port_type_xr17c15x_xr17v25x(struct exar8250 *p
break;
// 6x RS232, 2x RS422/RS485
case PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_6_2_SP:
- port_type = port_num < 6 ?
- CTI_PORT_TYPE_RS232 : CTI_PORT_TYPE_RS422_485;
+ port_type = port_num < 6 ? CTI_PORT_TYPE_RS232 :
+ CTI_PORT_TYPE_RS422_485;
break;
// 2x RS232, 6x RS422/RS485
case PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_2_6_SP:
- port_type = port_num < 2 ?
- CTI_PORT_TYPE_RS232 : CTI_PORT_TYPE_RS422_485;
+ port_type = port_num < 2 ? CTI_PORT_TYPE_RS232 :
+ CTI_PORT_TYPE_RS422_485;
break;
default:
dev_err(&pcidev->dev, "unknown/unsupported device\n");
--
2.43.2

2024-04-19 06:08:02

by Jiri Slaby

[permalink] [raw]

Subject: Re: [PATCH v1 4/4] serial: exar: change port_type ternary line wrapping

On 18. 04. 24, 17:36, Parker Newman wrote:
> From: Parker Newman <[email protected]>
>
> Change line wrapping of ternary operators in
> cti_get_port_type_xr17c15x_xr17v25x() for better readability.
>
> Old example:
>
> port_type = port_num == 0 ?
> CTI_PORT_TYPE_RS232 : CTI_PORT_TYPE_RS422_485;
>
> New:
> port_type = port_num == 0 ? CTI_PORT_TYPE_RS232 :
> CTI_PORT_TYPE_RS422_485;

This is worse IMO. Ilpo suggested a bit different alignment. But still...

> Based on feedback from:
> Link: https://lore.kernel.org/linux-serial/[email protected]

You should have CCed the author.

> Signed-off-by: Parker Newman <[email protected]>
> ---
> drivers/tty/serial/8250/8250_exar.c | 20 ++++++++++----------
> 1 file changed, 10 insertions(+), 10 deletions(-)
>
> diff --git a/drivers/tty/serial/8250/8250_exar.c b/drivers/tty/serial/8250/8250_exar.c
> index 10725ad0f3ef..a76b4e5bab4e 100644
> --- a/drivers/tty/serial/8250/8250_exar.c
> +++ b/drivers/tty/serial/8250/8250_exar.c
> @@ -741,19 +741,19 @@ static enum cti_port_type cti_get_port_type_xr17c15x_xr17v25x(struct exar8250 *p
> break;
> // 1x RS232, 1x RS422/RS485
> case PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_1_1:
> - port_type = port_num == 0 ?
> - CTI_PORT_TYPE_RS232 : CTI_PORT_TYPE_RS422_485;
> + port_type = port_num == 0 ? CTI_PORT_TYPE_RS232 :
> + CTI_PORT_TYPE_RS422_485;

Well, could you initialize port_type = CTI_PORT_TYPE_RS232? And here do
only:
if (port_num > 0)
return CTI_PORT_TYPE_RS422_485;
?

> break;
> // 2x RS232, 2x RS422/RS485
> case PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_2_2:
> - port_type = port_num < 2 ?
> - CTI_PORT_TYPE_RS232 : CTI_PORT_TYPE_RS422_485;
> + port_type = port_num < 2 ? CTI_PORT_TYPE_RS232 :
> + CTI_PORT_TYPE_RS422_485;

And so on.

> break;
> // 4x RS232, 4x RS422/RS485
> case PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_4_4:
> case PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_4_4_SP:
> - port_type = port_num < 4 ?
> - CTI_PORT_TYPE_RS232 : CTI_PORT_TYPE_RS422_485;
> + port_type = port_num < 4 ? CTI_PORT_TYPE_RS232 :
> + CTI_PORT_TYPE_RS422_485;
> break;
> // RS232/RS422/RS485 HW (jumper) selectable
> case PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_2:
> @@ -789,13 +789,13 @@ static enum cti_port_type cti_get_port_type_xr17c15x_xr17v25x(struct exar8250 *p
> break;
> // 6x RS232, 2x RS422/RS485
> case PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_6_2_SP:
> - port_type = port_num < 6 ?
> - CTI_PORT_TYPE_RS232 : CTI_PORT_TYPE_RS422_485;
> + port_type = port_num < 6 ? CTI_PORT_TYPE_RS232 :
> + CTI_PORT_TYPE_RS422_485;
> break;
> // 2x RS232, 6x RS422/RS485
> case PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_2_6_SP:
> - port_type = port_num < 2 ?
> - CTI_PORT_TYPE_RS232 : CTI_PORT_TYPE_RS422_485;
> + port_type = port_num < 2 ? CTI_PORT_TYPE_RS232 :
> + CTI_PORT_TYPE_RS422_485;
> break;
> default:
> dev_err(&pcidev->dev, "unknown/unsupported device\n");
> --
> 2.43.2
>

--
js
suse labs

2024-04-19 06:57:48

by Greg Kroah-Hartman

[permalink] [raw]

Subject: Re: [PATCH v1 4/4] serial: exar: change port_type ternary line wrapping

On Thu, Apr 18, 2024 at 11:36:31AM -0400, Parker Newman wrote:
> From: Parker Newman <[email protected]>
>
> Change line wrapping of ternary operators in
> cti_get_port_type_xr17c15x_xr17v25x() for better readability.
>
> Old example:
>
> port_type = port_num == 0 ?
> CTI_PORT_TYPE_RS232 : CTI_PORT_TYPE_RS422_485;
>
> New:
> port_type = port_num == 0 ? CTI_PORT_TYPE_RS232 :
> CTI_PORT_TYPE_RS422_485;
>
> Based on feedback from:
> Link: https://lore.kernel.org/linux-serial/[email protected]
>
> Signed-off-by: Parker Newman <[email protected]>
> ---
> drivers/tty/serial/8250/8250_exar.c | 20 ++++++++++----------
> 1 file changed, 10 insertions(+), 10 deletions(-)
>
> diff --git a/drivers/tty/serial/8250/8250_exar.c b/drivers/tty/serial/8250/8250_exar.c
> index 10725ad0f3ef..a76b4e5bab4e 100644
> --- a/drivers/tty/serial/8250/8250_exar.c
> +++ b/drivers/tty/serial/8250/8250_exar.c
> @@ -741,19 +741,19 @@ static enum cti_port_type cti_get_port_type_xr17c15x_xr17v25x(struct exar8250 *p
> break;
> // 1x RS232, 1x RS422/RS485
> case PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_1_1:
> - port_type = port_num == 0 ?
> - CTI_PORT_TYPE_RS232 : CTI_PORT_TYPE_RS422_485;
> + port_type = port_num == 0 ? CTI_PORT_TYPE_RS232 :
> + CTI_PORT_TYPE_RS422_485;

I missed this the first time, PLEASE never use ? : unless you have to.
Spell it out and use an if statement, the compiler doesn't care, and you
write code for people to read it first, cpus second. So this should
look like:
if (port_num)
port_type = CTI_PORT_TYPE_RS422_485;
else
port_type = CTI_PORT_TYPE_RS232;

Much simpler and easier to understand when you look at this in 10 years
and try to scan to figure out what went wrong with the logic here...

thanks,

greg k-h

2024-04-19 06:58:26

by Greg Kroah-Hartman

[permalink] [raw]

Subject: Re: [PATCH v1 3/4] serial: exar: remove unneeded parenthesis

On Thu, Apr 18, 2024 at 11:36:30AM -0400, Parker Newman wrote:
> From: Parker Newman <[email protected]>
>
> Remove unneeded parenthesis from several locations.
>
> Based on feedback from:
> Link: https://lore.kernel.org/linux-serial/[email protected]
>
> Signed-off-by: Parker Newman <[email protected]>
> ---
> drivers/tty/serial/8250/8250_exar.c | 28 ++++++++++++++--------------
> 1 file changed, 14 insertions(+), 14 deletions(-)
>
> diff --git a/drivers/tty/serial/8250/8250_exar.c b/drivers/tty/serial/8250/8250_exar.c
> index 01748ddbf729..10725ad0f3ef 100644
> --- a/drivers/tty/serial/8250/8250_exar.c
> +++ b/drivers/tty/serial/8250/8250_exar.c
> @@ -317,7 +317,7 @@ static inline u8 exar_ee_read_bit(struct exar8250 *priv)
>
> regb = exar_read_reg(priv, UART_EXAR_REGB);
>
> - return (regb & UART_EXAR_REGB_EEDO ? 1 : 0);
> + return regb & UART_EXAR_REGB_EEDO ? 1 : 0;

Again, spell out the ? : stuff here please. Using () isn't the problem :)

thanks,

greg k-h

2024-04-19 07:01:40

by Jiri Slaby

[permalink] [raw]

Subject: Re: [PATCH v1 3/4] serial: exar: remove unneeded parenthesis

On 19. 04. 24, 8:58, Greg Kroah-Hartman wrote:
> On Thu, Apr 18, 2024 at 11:36:30AM -0400, Parker Newman wrote:
>> From: Parker Newman <[email protected]>
>>
>> Remove unneeded parenthesis from several locations.
>>
>> Based on feedback from:
>> Link: https://lore.kernel.org/linux-serial/[email protected]
>>
>> Signed-off-by: Parker Newman <[email protected]>
>> ---
>> drivers/tty/serial/8250/8250_exar.c | 28 ++++++++++++++--------------
>> 1 file changed, 14 insertions(+), 14 deletions(-)
>>
>> diff --git a/drivers/tty/serial/8250/8250_exar.c b/drivers/tty/serial/8250/8250_exar.c
>> index 01748ddbf729..10725ad0f3ef 100644
>> --- a/drivers/tty/serial/8250/8250_exar.c
>> +++ b/drivers/tty/serial/8250/8250_exar.c
>> @@ -317,7 +317,7 @@ static inline u8 exar_ee_read_bit(struct exar8250 *priv)
>>
>> regb = exar_read_reg(priv, UART_EXAR_REGB);
>>
>> - return (regb & UART_EXAR_REGB_EEDO ? 1 : 0);
>> + return regb & UART_EXAR_REGB_EEDO ? 1 : 0;
>
> Again, spell out the ? : stuff here please. Using () isn't the problem :)

Could this in fact be inline bool exar_is_ee_set() (or alike) and return
that regb & UART_EXAR_REGB_EEDO directly (w/o using ternary at all)?

thanks,
--
js
suse labs

2024-04-19 12:17:46

by Parker Newman

[permalink] [raw]

Subject: Re: [PATCH v1 4/4] serial: exar: change port_type ternary line wrapping

On Fri, 19 Apr 2024 08:07:50 +0200
Jiri Slaby <[email protected]> wrote:

> On 18. 04. 24, 17:36, Parker Newman wrote:
> > From: Parker Newman <[email protected]>
> >
> > Change line wrapping of ternary operators in
> > cti_get_port_type_xr17c15x_xr17v25x() for better readability.
> >
> > Old example:
> >
> > port_type = port_num == 0 ?
> > CTI_PORT_TYPE_RS232 : CTI_PORT_TYPE_RS422_485;
> >
> > New:
> > port_type = port_num == 0 ? CTI_PORT_TYPE_RS232 :
> > CTI_PORT_TYPE_RS422_485;
>
> This is worse IMO. Ilpo suggested a bit different alignment. But still...
>
> > Based on feedback from:
> > Link: https://lore.kernel.org/linux-serial/[email protected]
>
> You should have CCed the author.
>
> > Signed-off-by: Parker Newman <[email protected]>
> > ---
> > drivers/tty/serial/8250/8250_exar.c | 20 ++++++++++----------
> > 1 file changed, 10 insertions(+), 10 deletions(-)
> >
> > diff --git a/drivers/tty/serial/8250/8250_exar.c b/drivers/tty/serial/8250/8250_exar.c
> > index 10725ad0f3ef..a76b4e5bab4e 100644
> > --- a/drivers/tty/serial/8250/8250_exar.c
> > +++ b/drivers/tty/serial/8250/8250_exar.c
> > @@ -741,19 +741,19 @@ static enum cti_port_type cti_get_port_type_xr17c15x_xr17v25x(struct exar8250 *p
> > break;
> > // 1x RS232, 1x RS422/RS485
> > case PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_1_1:
> > - port_type = port_num == 0 ?
> > - CTI_PORT_TYPE_RS232 : CTI_PORT_TYPE_RS422_485;
> > + port_type = port_num == 0 ? CTI_PORT_TYPE_RS232 :
> > + CTI_PORT_TYPE_RS422_485;
>
>
> Well, could you initialize port_type = CTI_PORT_TYPE_RS232? And here do
> only:
> if (port_num > 0)
> return CTI_PORT_TYPE_RS422_485;
> ?
>

I like this idea I will move to that. Thanks.

>
> > break;
> > // 2x RS232, 2x RS422/RS485
> > case PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_2_2:
> > - port_type = port_num < 2 ?
> > - CTI_PORT_TYPE_RS232 : CTI_PORT_TYPE_RS422_485;
> > + port_type = port_num < 2 ? CTI_PORT_TYPE_RS232 :
> > + CTI_PORT_TYPE_RS422_485;
>
> And so on.
>
> > break;
> > // 4x RS232, 4x RS422/RS485
> > case PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_4_4:
> > case PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_4_4_SP:
> > - port_type = port_num < 4 ?
> > - CTI_PORT_TYPE_RS232 : CTI_PORT_TYPE_RS422_485;
> > + port_type = port_num < 4 ? CTI_PORT_TYPE_RS232 :
> > + CTI_PORT_TYPE_RS422_485;
> > break;
> > // RS232/RS422/RS485 HW (jumper) selectable
> > case PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_2:
> > @@ -789,13 +789,13 @@ static enum cti_port_type cti_get_port_type_xr17c15x_xr17v25x(struct exar8250 *p
> > break;
> > // 6x RS232, 2x RS422/RS485
> > case PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_6_2_SP:
> > - port_type = port_num < 6 ?
> > - CTI_PORT_TYPE_RS232 : CTI_PORT_TYPE_RS422_485;
> > + port_type = port_num < 6 ? CTI_PORT_TYPE_RS232 :
> > + CTI_PORT_TYPE_RS422_485;
> > break;
> > // 2x RS232, 6x RS422/RS485
> > case PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_2_6_SP:
> > - port_type = port_num < 2 ?
> > - CTI_PORT_TYPE_RS232 : CTI_PORT_TYPE_RS422_485;
> > + port_type = port_num < 2 ? CTI_PORT_TYPE_RS232 :
> > + CTI_PORT_TYPE_RS422_485;
> > break;
> > default:
> > dev_err(&pcidev->dev, "unknown/unsupported device\n");
> > --
> > 2.43.2
> >
>

2024-04-19 12:50:34

by Parker Newman

[permalink] [raw]

Subject: Re: [PATCH v1 3/4] serial: exar: remove unneeded parenthesis

On Fri, 19 Apr 2024 09:01:22 +0200
Jiri Slaby <[email protected]> wrote:

> On 19. 04. 24, 8:58, Greg Kroah-Hartman wrote:
> > On Thu, Apr 18, 2024 at 11:36:30AM -0400, Parker Newman wrote:
> >> From: Parker Newman <[email protected]>
> >>
> >> Remove unneeded parenthesis from several locations.
> >>
> >> Based on feedback from:
> >> Link: https://lore.kernel.org/linux-serial/[email protected]
> >>
> >> Signed-off-by: Parker Newman <[email protected]>
> >> ---
> >> drivers/tty/serial/8250/8250_exar.c | 28 ++++++++++++++--------------
> >> 1 file changed, 14 insertions(+), 14 deletions(-)
> >>
> >> diff --git a/drivers/tty/serial/8250/8250_exar.c b/drivers/tty/serial/8250/8250_exar.c
> >> index 01748ddbf729..10725ad0f3ef 100644
> >> --- a/drivers/tty/serial/8250/8250_exar.c
> >> +++ b/drivers/tty/serial/8250/8250_exar.c
> >> @@ -317,7 +317,7 @@ static inline u8 exar_ee_read_bit(struct exar8250 *priv)
> >>
> >> regb = exar_read_reg(priv, UART_EXAR_REGB);
> >>
> >> - return (regb & UART_EXAR_REGB_EEDO ? 1 : 0);
> >> + return regb & UART_EXAR_REGB_EEDO ? 1 : 0;
> >
> > Again, spell out the ? : stuff here please. Using () isn't the problem :)
>
> Could this in fact be inline bool exar_is_ee_set() (or alike) and return
> that regb & UART_EXAR_REGB_EEDO directly (w/o using ternary at all)?
>
> thanks,

That would work. I will update.
Thanks,
Parker