This is the start of the stable review cycle for the 4.14.21 release.
There are 167 patches in this series, all will be posted as a response
to this one. If anyone has any issues with these being applied, please
let me know.
Responses should be made by Fri Feb 23 12:44:42 UTC 2018.
Anything received after that time might be too late.
The whole patch series can be found in one patch at:
https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.14.21-rc1.gz
or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.14.y
and the diffstat can be found below.
thanks,
greg k-h
-------------
Pseudo-Shortlog of commits:
Greg Kroah-Hartman <[email protected]>
Linux 4.14.21-rc1
Amir Goldstein <[email protected]>
ovl: hash directory inodes for fsnotify
Pierre-Louis Bossart <[email protected]>
ASoC: acpi: fix machine driver selection based on quirk
yinbo.zhu <[email protected]>
mmc: sdhci-of-esdhc: fix the mmc error after sleep on ls1046ardb
yinbo.zhu <[email protected]>
mmc: sdhci-of-esdhc: fix eMMC couldn't work after kexec
yangbo lu <[email protected]>
mmc: sdhci-of-esdhc: disable SD clock for clock value 0
Arnd Bergmann <[email protected]>
media: r820t: fix r820t_write_reg for KASAN
Linus Walleij <[email protected]>
ARM: dts: Delete bogus reference to the charlcd
Matthias Brugger <[email protected]>
arm: dts: mt2701: Add reset-cells
Matthias Brugger <[email protected]>
arm: dts: mt7623: Update ethsys binding
Arnd Bergmann <[email protected]>
ARM: dts: s5pv210: add interrupt-parent for ohci
Bjorn Andersson <[email protected]>
arm64: dts: msm8916: Add missing #phy-cells
Arnd Bergmann <[email protected]>
ARM: pxa/tosa-bt: add MODULE_LICENSE tag
Arnd Bergmann <[email protected]>
ARM: dts: exynos: fix RTC interrupt for exynos5410
Arnd Bergmann <[email protected]>
Bluetooth: BT_HCIUART now depends on SERIAL_DEV_BUS
Hannes Reinecke <[email protected]>
scsi: core: check for device state in __scsi_remove_target()
Tony Luck <[email protected]>
x86/mm, mm/hwpoison: Don't unconditionally unmap kernel 1:1 pages
James Hogan <[email protected]>
usb: Move USB_UHCI_BIG_ENDIAN_* out of USB_SUPPORT
Mikulas Patocka <[email protected]>
mvpp2: fix multicast address filter
Takashi Iwai <[email protected]>
ALSA: seq: Fix racy pool initializations
Daniel Mack <[email protected]>
ALSA: usb: add more device quirks for USB DSD devices
Lassi Ylikojola <[email protected]>
ALSA: usb-audio: add implicit fb quirk for Behringer UFX1204
Jan-Marek Glogowski <[email protected]>
ALSA: hda/realtek: PCI quirk for Fujitsu U7x7
Kailang Yang <[email protected]>
ALSA: hda/realtek - Enable Thinkpad Dock device for ALC298 platform
Kailang Yang <[email protected]>
ALSA: hda/realtek - Add headset mode support for Dell laptop
Kirill Marinushkin <[email protected]>
ALSA: usb-audio: Fix UAC2 get_ctl request with a RANGE attribute
Hui Wang <[email protected]>
ALSA: hda - Fix headset mic detection problem for two Dell machines
Stefan Agner <[email protected]>
mtd: nand: vf610: set correct ooblayout
Greg Kurz <[email protected]>
9p/trans_virtio: discard zero-length reply
Liu Bo <[email protected]>
Btrfs: fix unexpected -EEXIST when creating new inode
Liu Bo <[email protected]>
Btrfs: fix use-after-free on root->orphan_block_rsv
Liu Bo <[email protected]>
Btrfs: fix btrfs_evict_inode to handle abnormal inodes correctly
Liu Bo <[email protected]>
Btrfs: fix extent state leak from tree log
Liu Bo <[email protected]>
Btrfs: fix crash due to not cleaning up tree log block's dirty bits
Liu Bo <[email protected]>
Btrfs: fix deadlock in run_delalloc_nocow
NeilBrown <[email protected]>
dm: correctly handle chained bios in dec_pending()
Florian Westphal <[email protected]>
iscsi-target: make sure to wake up sleeping login worker
David Disseldorp <[email protected]>
target/iscsi: avoid NULL dereference in CHAP auth error path
Jens Axboe <[email protected]>
blk-wbt: account flush requests correctly
Chuck Lever <[email protected]>
xprtrdma: Fix BUG after a device removal
Chuck Lever <[email protected]>
xprtrdma: Fix calculation of ri_max_send_sges
Ray Strode <[email protected]>
drm/qxl: reapply cursor after resetting primary
Gerd Hoffmann <[email protected]>
qxl: alloc & use shadow for dumb buffers
Will Deacon <[email protected]>
arm64: proc: Set PTE_NG for table entries to avoid traversing them twice
Larry Finger <[email protected]>
rtlwifi: rtl8821ae: Fix connection lost problem correctly
Dan Williams <[email protected]>
mpls, nospec: Sanitize array index in mpls_label_ok()
Steven Rostedt (VMware) <[email protected]>
tracing: Fix parsing of globs with a wildcard at the beginning
Miklos Szeredi <[email protected]>
seq_file: fix incomplete reset on read from zero offset
Joao Martins <[email protected]>
xenbus: track caller request id
Simon Gaiser <[email protected]>
xen: Fix {set,clear}_foreign_p2m_mapping on autotranslating guests
Ilya Dryomov <[email protected]>
rbd: whitelist RBD_FEATURE_OPERATIONS feature bit
Nicolas Pitre <[email protected]>
console/dummy: leave .con_font_get set to NULL
Johan Hovold <[email protected]>
video: fbdev: atmel_lcdfb: fix display-timings lookup
Johan Hovold <[email protected]>
PCI: keystone: Fix interrupt-controller-node lookup
Ray Jui <[email protected]>
PCI: iproc: Fix NULL pointer dereference for BCMA
Dongdong Liu <[email protected]>
PCI: Disable MSI for HiSilicon Hip06/Hip07 only in Root Port mode
Marcin Nowakowski <[email protected]>
MIPS: Fix incorrect mem=X@Y handling
Corentin Labbe <[email protected]>
MIPS: Fix typo BIG_ENDIAN to CPU_BIG_ENDIAN
Jan H. Schönherr <[email protected]>
mm: Fix memory size alignment in devm_memremap_pages_release()
Arnd Bergmann <[email protected]>
mm: hide a #warning for COMPILE_TEST
Ernesto A. Fernández <[email protected]>
ext4: correct documentation for grpid mount option
Zhouyi Zhou <[email protected]>
ext4: save error to disk in __ext4_grp_locked_error()
Harshad Shirwadkar <[email protected]>
ext4: fix a race in the ext4 shutdown path
Tobin C. Harding <[email protected]>
jbd2: fix sphinx kernel-doc build warnings
Lukas Wunner <[email protected]>
Revert "apple-gmux: lock iGP IO to protect from vgaarb changes"
Sagi Grimberg <[email protected]>
mlx5: fix mlx5_get_vector_affinity to start from completion vector 0
Jerome Brunet <[email protected]>
Revert "mmc: meson-gx: include tx phase in the tuning process"
Phil Elwell <[email protected]>
mmc: bcm2835: Don't overwrite max frequency unconditionally
Linus Walleij <[email protected]>
mmc: sdhci: Implement an SDHCI-specific bounce buffer
Alexander Potapenko <[email protected]>
mbcache: initialize entry->e_referenced in mb_cache_entry_create()
Stewart Smith <[email protected]>
rtc-opal: Fix handling of firmware error codes, prevent busy loops
Julia Lawall <[email protected]>
drm/radeon: adjust tested variable
Alex Deucher <[email protected]>
drm/radeon: Add dpm quirk for Jet PRO (v2)
Shanker Donthineni <[email protected]>
arm64: Add missing Falkor part number for branch predictor hardening
Daniel Vetter <[email protected]>
drm/ast: Load lut in crtc_commit
Andrey Grodzovsky <[email protected]>
drm/amd/powerplay: Fix smu_table_entry.handle type
Ray Strode <[email protected]>
drm/qxl: unref cursor bo when finished with it
Tom St Denis <[email protected]>
drm/ttm: Fix 'buf' pointer update in ttm_bo_vm_access_kmap() (v2)
Felix Kuehling <[email protected]>
drm/ttm: Don't add swapped BOs to swap-LRU list
Ingo Molnar <[email protected]>
x86/entry/64: Fix CR3 restore in paranoid_exit()
Gustavo A. R. Silva <[email protected]>
x86/cpu: Change type of x86_cache_size variable to unsigned int
Dan Carpenter <[email protected]>
x86/spectre: Fix an error message
Jia Zhang <[email protected]>
x86/cpu: Rename cpu_data.x86_mask to cpu_data.x86_stepping
Rui Wang <[email protected]>
selftests/x86/mpx: Fix incorrect bounds with old _sigfault
Andy Lutomirski <[email protected]>
x86/mm: Rename flush_tlb_single() and flush_tlb_one() to __flush_tlb_one_[user|kernel]()
Michal Hocko <[email protected]>
kmemcheck: rip it out for real
Levin, Alexander (Sasha Levin) <[email protected]>
kmemcheck: rip it out
Levin, Alexander (Sasha Levin) <[email protected]>
kmemcheck: remove whats left of NOTRACK flags
Levin, Alexander (Sasha Levin) <[email protected]>
kmemcheck: stop using GFP_NOTRACK and SLAB_NOTRACK
Levin, Alexander (Sasha Levin) <[email protected]>
kmemcheck: remove annotations
Peter Zijlstra <[email protected]>
x86/speculation: Add <asm/msr-index.h> dependency
Will Deacon <[email protected]>
nospec: Move array_index_nospec() parameter checking into separate macro
Dan Williams <[email protected]>
x86/speculation: Fix up array_index_nospec_mask() asm constraint
Peter Zijlstra <[email protected]>
x86/debug: Use UD2 for WARN()
Josh Poimboeuf <[email protected]>
x86/debug, objtool: Annotate WARN()-related UD2 as reachable
Josh Poimboeuf <[email protected]>
objtool: Fix segfault in ignore_unreachable_insn()
Dominik Brodowski <[email protected]>
selftests/x86: Disable tests requiring 32-bit support on pure 64-bit systems
Dominik Brodowski <[email protected]>
selftests/x86: Do not rely on "int $0x80" in single_step_syscall.c
Dominik Brodowski <[email protected]>
selftests/x86: Do not rely on "int $0x80" in test_mremap_vdso.c
Ingo Molnar <[email protected]>
selftests/x86/pkeys: Remove unused functions
Dominik Brodowski <[email protected]>
selftests/x86: Clean up and document sscanf() usage
Dominik Brodowski <[email protected]>
selftests/x86: Fix vDSO selftest segfault for vsyscall=none
Borislav Petkov <[email protected]>
x86/entry/64: Remove the unused 'icebp' macro
Josh Poimboeuf <[email protected]>
x86/entry/64: Fix paranoid_entry() frame pointer warning
Dominik Brodowski <[email protected]>
x86/entry/64: Indent PUSH_AND_CLEAR_REGS and POP_REGS properly
Dominik Brodowski <[email protected]>
x86/entry/64: Get rid of the ALLOC_PT_GPREGS_ON_STACK and SAVE_AND_CLEAR_REGS macros
Dominik Brodowski <[email protected]>
x86/entry/64: Use PUSH_AND_CLEAN_REGS in more cases
Dominik Brodowski <[email protected]>
x86/entry/64: Introduce the PUSH_AND_CLEAN_REGS macro
Dominik Brodowski <[email protected]>
x86/entry/64: Interleave XOR register clearing with PUSH instructions
Dominik Brodowski <[email protected]>
x86/entry/64: Merge the POP_C_REGS and POP_EXTRA_REGS macros into a single POP_REGS macro
Dominik Brodowski <[email protected]>
x86/entry/64: Merge SAVE_C_REGS and SAVE_EXTRA_REGS, remove unused extensions
Dan Williams <[email protected]>
x86/entry/64: Clear registers for exceptions/interrupts, to reduce speculation attack surface
Rafael J. Wysocki <[email protected]>
PM: cpuidle: Fix cpuidle_poll_state_init() prototype
Lukas Wunner <[email protected]>
PM / runtime: Update links_count also if !CONFIG_SRCU
Ingo Molnar <[email protected]>
x86/speculation: Clean up various Spectre related details
KarimAllah Ahmed <[email protected]>
KVM/nVMX: Set the CPU_BASED_USE_MSR_BITMAPS if we have a valid L02 MSR bitmap
KarimAllah Ahmed <[email protected]>
X86/nVMX: Properly set spec_ctrl and pred_cmd before merging MSRs
David Woodhouse <[email protected]>
KVM/x86: Reduce retpoline performance impact in slot_handle_level_range(), by always inlining iterator helper methods
David Woodhouse <[email protected]>
Revert "x86/speculation: Simplify indirect_branch_prediction_barrier()"
David Woodhouse <[email protected]>
x86/speculation: Correct Speculation Control microcode blacklist again
David Woodhouse <[email protected]>
x86/speculation: Update Speculation Control microcode blacklist
Nadav Amit <[email protected]>
x86/mm/pti: Fix PTI comment in entry_SYSCALL_64()
Balbir Singh <[email protected]>
powerpc/mm/radix: Split linear mapping on hot-unplug
Artem Savkov <[email protected]>
crypto: sun4i_ss_prng - convert lock to _bh in sun4i_ss_prng_generate
Artem Savkov <[email protected]>
crypto: sun4i_ss_prng - fix return value of sun4i_ss_prng_generate
Geert Uytterhoeven <[email protected]>
compiler-gcc.h: __nostackprotector needs gcc-4.4 and up
Geert Uytterhoeven <[email protected]>
compiler-gcc.h: Introduce __optimize function attribute
Dan Williams <[email protected]>
x86/entry/64/compat: Clear registers for compat syscalls, to reduce speculation attack surface
Dan Williams <[email protected]>
x86/entry/64: Clear extra registers beyond syscall arguments, to reduce speculation attack surface
Rafael J. Wysocki <[email protected]>
x86: PM: Make APM idle driver initialize polling state
Juergen Gross <[email protected]>
x86/xen: init %gs very early to avoid page faults with stack protector
Kirill A. Shutemov <[email protected]>
x86/kexec: Make kexec (mostly) work in 5-level paging mode
Lucas De Marchi <[email protected]>
x86/gpu: add CFL to early quirks
Anuj Phogat <[email protected]>
drm/i915/kbl: Change a KBL pci id to GT2 from GT1.5
Lionel Landwerlin <[email protected]>
drm/i915: add GT number to intel_device_info
Viresh Kumar <[email protected]>
arm: spear13xx: Fix spics gpio controller's warning
Viresh Kumar <[email protected]>
arm: spear13xx: Fix dmas cells
Viresh Kumar <[email protected]>
arm: spear600: Add missing interrupt-parent of rtc
Sean Wang <[email protected]>
arm: dts: mt7623: fix card detection issue on bananapi-r2
Arnd Bergmann <[email protected]>
ARM: dts: nomadik: add interrupt-parent for clcd
Patrice Chotard <[email protected]>
ARM: dts: STi: Add gpio polarity for "hdmi,hpd-gpio" property
Arnd Bergmann <[email protected]>
ARM: lpc3250: fix uda1380 gpio numbers
Bjorn Andersson <[email protected]>
arm64: dts: msm8916: Correct ipc references for smsm
Eugene Syromiatnikov <[email protected]>
s390: fix handling of -1 in set{,fs}[gu]id16 syscalls
Christian König <[email protected]>
dma-buf: fix reservation_object_wait_timeout_rcu once more v2
Benjamin Herrenschmidt <[email protected]>
powerpc: Fix DABR match on hash based systems
Cédric Le Goater <[email protected]>
powerpc/xive: Use hw CPU ids when configuring the CPU queues
Alexey Kardashevskiy <[email protected]>
powerpc/mm: Flush radix process translations when setting MMU type
Nathan Fontenot <[email protected]>
powerpc/numa: Invalidate numa_cpu_lookup_table on cpu remove
Mahesh Salgaonkar <[email protected]>
powerpc/radix: Remove trace_tlbie call from radix__flush_tlb_all
Gang He <[email protected]>
ocfs2: try a blocking lock before return AOP_TRUNCATED_PAGE
Brian Norris <[email protected]>
mwifiex: resolve reset vs. remove()/shutdown() deadlocks
Bjorn Andersson <[email protected]>
PM / devfreq: Propagate error from devfreq_add_device()
Christian König <[email protected]>
swiotlb: suppress warning when __GFP_NOWARN is set
Shilpasri G Bhat <[email protected]>
cpufreq: powernv: Dont assume distinct pstate values for nominal and pmin
Bart Van Assche <[email protected]>
RDMA/rxe: Fix rxe_qp_cleanup()
Bart Van Assche <[email protected]>
RDMA/rxe: Fix a race condition in rxe_requester()
Bart Van Assche <[email protected]>
RDMA/rxe: Fix a race condition related to the QP error state
Arnd Bergmann <[email protected]>
kselftest: fix OOM in memory compaction test
Anders Roxell <[email protected]>
selftests: seccomp: fix compile error seccomp_bpf
Michael J. Ruhl <[email protected]>
IB/core: Avoid a potential OOPs for an unused optional parameter
Bodong Wang <[email protected]>
IB/core: Fix ib_wc structure size to remain in 64 bytes boundary
Bart Van Assche <[email protected]>
IB/core: Fix two kernel warnings triggered by rxe registration
Jack Morgenstein <[email protected]>
IB/mlx4: Fix incorrectly releasing steerable UD QPs when have only ETH ports
Mike Marciniszyn <[email protected]>
IB/qib: Fix comparison error with qperf compare/swap test
Jack Morgenstein <[email protected]>
IB/umad: Fix use of unprotected device pointer
Steffen Weber <[email protected]>
scsi: smartpqi: allow static build ("built-in")
Randy Dunlap <[email protected]>
tracing: Prevent PROFILE_ALL_BRANCHES when FORTIFY_SOURCE=y
-------------
Diffstat:
Documentation/admin-guide/kernel-parameters.txt | 7 -
Documentation/dev-tools/index.rst | 1 -
Documentation/dev-tools/kmemcheck.rst | 733 ---------------------
Documentation/devicetree/bindings/dma/snps-dma.txt | 2 +-
Documentation/filesystems/ext4.txt | 2 +-
MAINTAINERS | 10 -
Makefile | 4 +-
arch/arm/boot/dts/arm-realview-eb-mp.dtsi | 5 -
arch/arm/boot/dts/exynos5410.dtsi | 1 -
arch/arm/boot/dts/lpc3250-ea3250.dts | 4 +-
arch/arm/boot/dts/lpc3250-phy3250.dts | 4 +-
arch/arm/boot/dts/mt2701.dtsi | 2 +
arch/arm/boot/dts/mt7623.dtsi | 1 +
arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts | 2 +-
arch/arm/boot/dts/s5pv210.dtsi | 1 +
arch/arm/boot/dts/spear1310-evb.dts | 2 +-
arch/arm/boot/dts/spear1340.dtsi | 4 +-
arch/arm/boot/dts/spear13xx.dtsi | 6 +-
arch/arm/boot/dts/spear600.dtsi | 1 +
arch/arm/boot/dts/ste-nomadik-stn8815.dtsi | 1 +
arch/arm/boot/dts/stih407.dtsi | 3 +-
arch/arm/boot/dts/stih410.dtsi | 3 +-
arch/arm/include/asm/dma-iommu.h | 1 -
arch/arm/include/asm/pgalloc.h | 2 +-
arch/arm/mach-pxa/tosa-bt.c | 4 +
arch/arm64/boot/dts/qcom/msm8916.dtsi | 5 +-
arch/arm64/include/asm/pgalloc.h | 2 +-
arch/arm64/kernel/cpu_errata.c | 9 +
arch/arm64/kvm/hyp/switch.c | 4 +-
arch/arm64/mm/proc.S | 14 +-
arch/mips/Kconfig | 12 +-
arch/mips/kernel/setup.c | 16 +-
arch/openrisc/include/asm/dma-mapping.h | 1 -
arch/powerpc/include/asm/pgalloc.h | 2 +-
arch/powerpc/include/asm/topology.h | 5 +
arch/powerpc/kernel/exceptions-64s.S | 2 +-
arch/powerpc/kernel/head_32.S | 2 +-
arch/powerpc/mm/numa.c | 5 -
arch/powerpc/mm/pgtable-radix.c | 95 ++-
arch/powerpc/mm/pgtable_64.c | 2 +
arch/powerpc/mm/tlb-radix.c | 2 -
arch/powerpc/platforms/pseries/hotplug-cpu.c | 2 +
arch/powerpc/sysdev/xive/spapr.c | 16 +-
arch/s390/kernel/compat_linux.c | 8 +-
arch/sh/kernel/dwarf.c | 4 +-
arch/sh/kernel/process.c | 2 +-
arch/sparc/mm/init_64.c | 4 +-
arch/unicore32/include/asm/pgalloc.h | 2 +-
arch/x86/Kconfig | 3 +-
arch/x86/Makefile | 5 -
arch/x86/entry/calling.h | 107 ++-
arch/x86/entry/entry_64.S | 92 +--
arch/x86/entry/entry_64_compat.S | 30 +
arch/x86/events/intel/core.c | 2 +-
arch/x86/events/intel/lbr.c | 2 +-
arch/x86/events/intel/p6.c | 2 +-
arch/x86/include/asm/acpi.h | 2 +-
arch/x86/include/asm/barrier.h | 2 +-
arch/x86/include/asm/bug.h | 19 +-
arch/x86/include/asm/dma-mapping.h | 1 -
arch/x86/include/asm/kmemcheck.h | 43 --
arch/x86/include/asm/nospec-branch.h | 14 +-
arch/x86/include/asm/page_64.h | 4 -
arch/x86/include/asm/paravirt.h | 4 +-
arch/x86/include/asm/paravirt_types.h | 2 +-
arch/x86/include/asm/pgtable.h | 5 -
arch/x86/include/asm/pgtable_32.h | 2 +-
arch/x86/include/asm/pgtable_types.h | 13 -
arch/x86/include/asm/processor.h | 7 +-
arch/x86/include/asm/string_32.h | 9 -
arch/x86/include/asm/string_64.h | 8 -
arch/x86/include/asm/tlbflush.h | 27 +-
arch/x86/include/asm/xor.h | 5 +-
arch/x86/kernel/acpi/apei.c | 2 +-
arch/x86/kernel/amd_nb.c | 2 +-
arch/x86/kernel/apic/apic.c | 6 +-
arch/x86/kernel/apm_32.c | 1 +
arch/x86/kernel/asm-offsets_32.c | 2 +-
arch/x86/kernel/cpu/amd.c | 28 +-
arch/x86/kernel/cpu/bugs.c | 34 +-
arch/x86/kernel/cpu/centaur.c | 4 +-
arch/x86/kernel/cpu/common.c | 10 +-
arch/x86/kernel/cpu/cyrix.c | 2 +-
arch/x86/kernel/cpu/intel.c | 46 +-
arch/x86/kernel/cpu/intel_rdt.c | 2 +-
arch/x86/kernel/cpu/mcheck/mce-internal.h | 15 +
arch/x86/kernel/cpu/mcheck/mce.c | 17 +-
arch/x86/kernel/cpu/microcode/intel.c | 6 +-
arch/x86/kernel/cpu/mtrr/generic.c | 2 +-
arch/x86/kernel/cpu/mtrr/main.c | 4 +-
arch/x86/kernel/cpu/proc.c | 8 +-
arch/x86/kernel/early-quirks.c | 1 +
arch/x86/kernel/espfix_64.c | 2 +-
arch/x86/kernel/head_32.S | 4 +-
arch/x86/kernel/mpparse.c | 2 +-
arch/x86/kernel/paravirt.c | 6 +-
arch/x86/kernel/relocate_kernel_64.S | 8 +
arch/x86/kernel/traps.c | 7 +-
arch/x86/kvm/mmu.c | 10 +-
arch/x86/kvm/vmx.c | 7 +-
arch/x86/lib/cpu.c | 2 +-
arch/x86/mm/Makefile | 2 -
arch/x86/mm/fault.c | 6 -
arch/x86/mm/init.c | 8 +-
arch/x86/mm/init_64.c | 4 +-
arch/x86/mm/ioremap.c | 2 +-
arch/x86/mm/kmemcheck/Makefile | 1 -
arch/x86/mm/kmemcheck/error.c | 228 -------
arch/x86/mm/kmemcheck/error.h | 16 -
arch/x86/mm/kmemcheck/kmemcheck.c | 658 ------------------
arch/x86/mm/kmemcheck/opcode.c | 107 ---
arch/x86/mm/kmemcheck/opcode.h | 10 -
arch/x86/mm/kmemcheck/pte.c | 23 -
arch/x86/mm/kmemcheck/pte.h | 11 -
arch/x86/mm/kmemcheck/selftest.c | 71 --
arch/x86/mm/kmemcheck/selftest.h | 7 -
arch/x86/mm/kmemcheck/shadow.c | 173 -----
arch/x86/mm/kmemcheck/shadow.h | 19 -
arch/x86/mm/kmmio.c | 2 +-
arch/x86/mm/pageattr.c | 10 +-
arch/x86/mm/pgtable.c | 2 +-
arch/x86/mm/pgtable_32.c | 2 +-
arch/x86/mm/tlb.c | 6 +-
arch/x86/platform/efi/efi_64.c | 2 +-
arch/x86/platform/uv/tlb_uv.c | 2 +-
arch/x86/xen/mmu_pv.c | 6 +-
arch/x86/xen/p2m.c | 6 +
arch/x86/xen/xen-head.S | 16 +
block/blk-wbt.c | 10 +-
crypto/xor.c | 7 +-
drivers/base/core.c | 3 +
drivers/block/rbd.c | 4 +-
drivers/bluetooth/Kconfig | 2 +-
drivers/char/hw_random/via-rng.c | 2 +-
drivers/char/random.c | 1 -
drivers/cpufreq/acpi-cpufreq.c | 2 +-
drivers/cpufreq/longhaul.c | 6 +-
drivers/cpufreq/p4-clockmod.c | 2 +-
drivers/cpufreq/powernow-k7.c | 2 +-
drivers/cpufreq/powernv-cpufreq.c | 4 +-
drivers/cpufreq/speedstep-centrino.c | 4 +-
drivers/cpufreq/speedstep-lib.c | 6 +-
drivers/crypto/padlock-aes.c | 2 +-
drivers/crypto/sunxi-ss/sun4i-ss-prng.c | 6 +-
drivers/devfreq/devfreq.c | 2 +-
drivers/dma-buf/reservation.c | 8 +-
drivers/edac/amd64_edac.c | 2 +-
drivers/gpu/drm/amd/powerplay/smumgr/rv_smumgr.h | 2 +-
drivers/gpu/drm/ast/ast_mode.c | 1 +
drivers/gpu/drm/i915/i915_drv.h | 1 +
drivers/gpu/drm/i915/i915_pci.c | 193 ++++--
drivers/gpu/drm/qxl/qxl_cmd.c | 6 +-
drivers/gpu/drm/qxl/qxl_display.c | 112 +++-
drivers/gpu/drm/qxl/qxl_drv.h | 4 +
drivers/gpu/drm/qxl/qxl_dumb.c | 1 +
drivers/gpu/drm/radeon/radeon_uvd.c | 2 +-
drivers/gpu/drm/radeon/si_dpm.c | 5 +
drivers/gpu/drm/ttm/ttm_bo.c | 3 +-
drivers/gpu/drm/ttm/ttm_bo_vm.c | 3 +-
drivers/hwmon/coretemp.c | 6 +-
drivers/hwmon/hwmon-vid.c | 2 +-
drivers/hwmon/k10temp.c | 2 +-
drivers/hwmon/k8temp.c | 2 +-
drivers/infiniband/core/device.c | 20 +-
drivers/infiniband/core/sysfs.c | 1 -
drivers/infiniband/core/user_mad.c | 2 +-
drivers/infiniband/core/uverbs_std_types.c | 2 +-
drivers/infiniband/hw/mlx4/main.c | 13 +-
drivers/infiniband/hw/qib/qib_rc.c | 6 +-
drivers/infiniband/sw/rxe/rxe_loc.h | 1 -
drivers/infiniband/sw/rxe/rxe_qp.c | 12 +-
drivers/infiniband/sw/rxe/rxe_req.c | 9 +-
drivers/infiniband/sw/rxe/rxe_resp.c | 2 +-
drivers/infiniband/sw/rxe/rxe_verbs.c | 2 +
drivers/infiniband/sw/rxe/rxe_verbs.h | 3 +
drivers/md/dm.c | 3 +-
drivers/media/tuners/r820t.c | 13 +-
drivers/misc/c2port/core.c | 2 -
drivers/mmc/host/bcm2835.c | 3 +-
drivers/mmc/host/meson-gx-mmc.c | 19 +-
drivers/mmc/host/sdhci-of-esdhc.c | 64 +-
drivers/mmc/host/sdhci.c | 164 ++++-
drivers/mmc/host/sdhci.h | 3 +
drivers/mtd/nand/vf610_nfc.c | 6 +-
drivers/net/ethernet/marvell/mvpp2.c | 11 +-
drivers/net/ethernet/mellanox/mlx4/qp.c | 3 +
drivers/net/wireless/marvell/mwifiex/pcie.c | 5 +-
.../net/wireless/realtek/rtlwifi/rtl8821ae/hw.c | 5 +-
drivers/net/wireless/realtek/rtlwifi/wifi.h | 1 +
drivers/pci/dwc/pci-keystone.c | 5 +-
drivers/pci/host/pcie-iproc-platform.c | 7 +
drivers/pci/host/pcie-iproc.c | 8 +-
drivers/pci/host/pcie-iproc.h | 2 +
drivers/pci/quirks.c | 2 +-
drivers/platform/x86/apple-gmux.c | 48 +-
drivers/rtc/rtc-opal.c | 12 +-
drivers/scsi/scsi_sysfs.c | 5 +-
drivers/scsi/smartpqi/Makefile | 2 +-
drivers/target/iscsi/iscsi_target_auth.c | 3 +-
drivers/target/iscsi/iscsi_target_nego.c | 3 +
drivers/usb/Kconfig | 8 +
drivers/usb/host/Kconfig | 8 -
drivers/video/console/dummycon.c | 1 -
drivers/video/fbdev/atmel_lcdfb.c | 8 +-
drivers/video/fbdev/geode/video_gx.c | 2 +-
drivers/xen/xenbus/xenbus.h | 1 +
drivers/xen/xenbus/xenbus_comms.c | 1 +
drivers/xen/xenbus/xenbus_xs.c | 3 +
fs/btrfs/inode.c | 41 +-
fs/btrfs/tree-log.c | 32 +-
fs/dcache.c | 2 -
fs/ext4/inode.c | 16 +-
fs/ext4/super.c | 1 +
fs/jbd2/transaction.c | 5 +-
fs/mbcache.c | 1 +
fs/ocfs2/dlmglue.c | 9 +
fs/overlayfs/inode.c | 37 +-
fs/overlayfs/super.c | 1 +
fs/overlayfs/util.c | 4 +-
fs/seq_file.c | 5 +-
include/drm/i915_pciids.h | 160 +++--
include/linux/c2port.h | 4 -
include/linux/compiler-gcc.h | 7 +-
include/linux/compiler.h | 4 +
include/linux/cpuidle.h | 2 +-
include/linux/dma-mapping.h | 8 +-
include/linux/filter.h | 2 -
include/linux/gfp.h | 9 -
include/linux/interrupt.h | 15 -
include/linux/jbd2.h | 431 +++++++-----
include/linux/kmemcheck.h | 172 -----
include/linux/mlx5/driver.h | 2 +-
include/linux/mm_inline.h | 6 -
include/linux/mm_types.h | 8 -
include/linux/net.h | 3 -
include/linux/nospec.h | 36 +-
include/linux/ring_buffer.h | 3 -
include/linux/skbuff.h | 3 -
include/linux/slab.h | 6 -
include/linux/thread_info.h | 5 +-
include/net/inet_sock.h | 3 -
include/net/inet_timewait_sock.h | 4 -
include/net/sock.h | 3 -
include/rdma/ib_verbs.h | 2 +-
include/trace/events/mmflags.h | 1 -
include/trace/events/xen.h | 2 +-
init/do_mounts.c | 3 +-
init/main.c | 1 -
kernel/bpf/core.c | 6 -
kernel/fork.c | 12 +-
kernel/locking/lockdep.c | 3 -
kernel/memremap.c | 3 +-
kernel/signal.c | 3 +-
kernel/softirq.c | 10 -
kernel/sysctl.c | 10 -
kernel/trace/Kconfig | 2 +-
kernel/trace/ring_buffer.c | 3 -
kernel/trace/trace_events_filter.c | 9 +-
lib/Kconfig.debug | 6 +-
lib/Kconfig.kmemcheck | 94 ---
lib/swiotlb.c | 15 +-
mm/Kconfig.debug | 1 -
mm/Makefile | 2 -
mm/kmemcheck.c | 126 ----
mm/kmemleak.c | 9 -
mm/memory-failure.c | 2 -
mm/memory.c | 2 +-
mm/page_alloc.c | 14 -
mm/slab.c | 16 +-
mm/slab.h | 7 +-
mm/slab_common.c | 2 +-
mm/slub.c | 31 +-
net/9p/trans_virtio.c | 3 +-
net/core/skbuff.c | 5 -
net/core/sock.c | 2 -
net/ipv4/inet_timewait_sock.c | 3 -
net/ipv4/tcp_input.c | 1 -
net/mpls/af_mpls.c | 24 +-
net/socket.c | 1 -
net/sunrpc/xprtrdma/rpc_rdma.c | 2 +-
net/sunrpc/xprtrdma/verbs.c | 8 +-
scripts/kernel-doc | 2 -
sound/core/seq/seq_clientmgr.c | 8 +-
sound/pci/hda/patch_realtek.c | 72 ++
sound/soc/intel/common/sst-match-acpi.c | 8 +-
sound/usb/mixer.c | 18 +-
sound/usb/pcm.c | 9 +
sound/usb/quirks.c | 7 +-
tools/include/linux/kmemcheck.h | 9 -
tools/objtool/check.c | 12 +-
tools/perf/builtin-kmem.c | 1 -
tools/testing/selftests/seccomp/seccomp_bpf.c | 4 +-
tools/testing/selftests/vm/compaction_test.c | 2 +
tools/testing/selftests/x86/Makefile | 22 +-
tools/testing/selftests/x86/mpx-mini-test.c | 32 +-
tools/testing/selftests/x86/protection_keys.c | 28 -
tools/testing/selftests/x86/single_step_syscall.c | 5 +-
tools/testing/selftests/x86/test_mremap_vdso.c | 4 +
tools/testing/selftests/x86/test_vdso.c | 55 +-
tools/testing/selftests/x86/test_vsyscall.c | 11 +-
300 files changed, 1959 insertions(+), 3842 deletions(-)
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Alexey Kardashevskiy <[email protected]>
commit 62e984ddfd6b056d399e24113f5e6a7145e579d8 upstream.
Radix guests do normally invalidate process-scoped translations when a
new pid is allocated but migrated guests do not invalidate these so
migrated guests crash sometime, especially easy to reproduce with
migration happening within first 10 seconds after the guest boot start
on the same machine.
This adds the "Invalidate process-scoped translations" flush to fix
radix guests migration.
Fixes: 2ee13be34b13 ("KVM: PPC: Book3S HV: Update kvmppc_set_arch_compat() for ISA v3.00")
Cc: [email protected] # v4.10+
Signed-off-by: Alexey Kardashevskiy <[email protected]>
Tested-by: Laurent Vivier <[email protected]>
Tested-by: Daniel Henrique Barboza <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/powerpc/mm/pgtable_64.c | 2 ++
1 file changed, 2 insertions(+)
--- a/arch/powerpc/mm/pgtable_64.c
+++ b/arch/powerpc/mm/pgtable_64.c
@@ -483,6 +483,8 @@ void mmu_partition_table_set_entry(unsig
if (old & PATB_HR) {
asm volatile(PPC_TLBIE_5(%0,%1,2,0,1) : :
"r" (TLBIEL_INVAL_SET_LPID), "r" (lpid));
+ asm volatile(PPC_TLBIE_5(%0,%1,2,1,1) : :
+ "r" (TLBIEL_INVAL_SET_LPID), "r" (lpid));
trace_tlbie(lpid, 0, TLBIEL_INVAL_SET_LPID, lpid, 2, 0, 1);
} else {
asm volatile(PPC_TLBIE_5(%0,%1,2,0,0) : :
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Patrice Chotard <[email protected]>
commit 7ac1f59c09a61e6af6622df6809e003b0af07f3d upstream.
The GPIO polarity is missing in the hdmi,hpd-gpio property, this
fixes the following DT warnings:
arch/arm/boot/dts/stih410-b2120.dtb: Warning (gpios_property): hdmi,hpd-gpio property
size (8) too small for cell size 2 in /soc/sti-display-subsystem/sti-hdmi@8d04000
arch/arm/boot/dts/stih407-b2120.dtb: Warning (gpios_property): hdmi,hpd-gpio property
size (8) too small for cell size 2 in /soc/sti-display-subsystem/sti-hdmi@8d04000
arch/arm/boot/dts/stih410-b2260.dtb: Warning (gpios_property): hdmi,hpd-gpio property
size (8) too small for cell size 2 in /soc/sti-display-subsystem/sti-hdmi@8d04000
[arnd: marked Cc:stable since this warning shows up with the latest dtc
by default, and is more likely to actually cause problems than the
other patches from this series]
Cc: [email protected]
Signed-off-by: Patrice Chotard <[email protected]>
Signed-off-by: Arnd Bergmann <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/arm/boot/dts/stih407.dtsi | 3 ++-
arch/arm/boot/dts/stih410.dtsi | 3 ++-
2 files changed, 4 insertions(+), 2 deletions(-)
--- a/arch/arm/boot/dts/stih407.dtsi
+++ b/arch/arm/boot/dts/stih407.dtsi
@@ -8,6 +8,7 @@
*/
#include "stih407-clock.dtsi"
#include "stih407-family.dtsi"
+#include <dt-bindings/gpio/gpio.h>
/ {
soc {
sti-display-subsystem {
@@ -122,7 +123,7 @@
<&clk_s_d2_quadfs 0>,
<&clk_s_d2_quadfs 1>;
- hdmi,hpd-gpio = <&pio5 3>;
+ hdmi,hpd-gpio = <&pio5 3 GPIO_ACTIVE_LOW>;
reset-names = "hdmi";
resets = <&softreset STIH407_HDMI_TX_PHY_SOFTRESET>;
ddc = <&hdmiddc>;
--- a/arch/arm/boot/dts/stih410.dtsi
+++ b/arch/arm/boot/dts/stih410.dtsi
@@ -9,6 +9,7 @@
#include "stih410-clock.dtsi"
#include "stih407-family.dtsi"
#include "stih410-pinctrl.dtsi"
+#include <dt-bindings/gpio/gpio.h>
/ {
aliases {
bdisp0 = &bdisp0;
@@ -213,7 +214,7 @@
<&clk_s_d2_quadfs 0>,
<&clk_s_d2_quadfs 1>;
- hdmi,hpd-gpio = <&pio5 3>;
+ hdmi,hpd-gpio = <&pio5 3 GPIO_ACTIVE_LOW>;
reset-names = "hdmi";
resets = <&softreset STIH407_HDMI_TX_PHY_SOFTRESET>;
ddc = <&hdmiddc>;
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Viresh Kumar <[email protected]>
commit f8975cb1b8a36d0839b6365235778dd9df1d04ca upstream.
This fixes the following warning by also sending the flags argument for
gpio controllers:
Property 'cs-gpios', cell 6 is not a phandle reference in
/ahb/apb/spi@e0100000
Fixes: 8113ba917dfa ("ARM: SPEAr: DT: Update device nodes")
Cc: [email protected] # v3.8+
Reported-by: Arnd Bergmann <[email protected]>
Signed-off-by: Viresh Kumar <[email protected]>
Signed-off-by: Olof Johansson <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/arm/boot/dts/spear1310-evb.dts | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/arch/arm/boot/dts/spear1310-evb.dts
+++ b/arch/arm/boot/dts/spear1310-evb.dts
@@ -349,7 +349,7 @@
spi0: spi@e0100000 {
status = "okay";
num-cs = <3>;
- cs-gpios = <&gpio1 7 0>, <&spics 0>, <&spics 1>;
+ cs-gpios = <&gpio1 7 0>, <&spics 0 0>, <&spics 1 0>;
stmpe610@0 {
compatible = "st,stmpe610";
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Steven Rostedt (VMware) <[email protected]>
commit 07234021410bbc27b7c86c18de98616c29fbe667 upstream.
Al Viro reported:
For substring - sure, but what about something like "*a*b" and "a*b"?
AFAICS, filter_parse_regex() ends up with identical results in both
cases - MATCH_GLOB and *search = "a*b". And no way for the caller
to tell one from another.
Testing this with the following:
# cd /sys/kernel/tracing
# echo '*raw*lock' > set_ftrace_filter
bash: echo: write error: Invalid argument
With this patch:
# echo '*raw*lock' > set_ftrace_filter
# cat set_ftrace_filter
_raw_read_trylock
_raw_write_trylock
_raw_read_unlock
_raw_spin_unlock
_raw_write_unlock
_raw_spin_trylock
_raw_spin_lock
_raw_write_lock
_raw_read_lock
Al recommended not setting the search buffer to skip the first '*' unless we
know we are not using MATCH_GLOB. This implements his suggested logic.
Link: http://lkml.kernel.org/r/[email protected]
Cc: [email protected]
Fixes: 60f1d5e3bac44 ("ftrace: Support full glob matching")
Reviewed-by: Masami Hiramatsu <[email protected]>
Reported-by: Al Viro <[email protected]>
Suggsted-by: Al Viro <[email protected]>
Signed-off-by: Steven Rostedt (VMware) <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
kernel/trace/trace_events_filter.c | 9 ++++-----
1 file changed, 4 insertions(+), 5 deletions(-)
--- a/kernel/trace/trace_events_filter.c
+++ b/kernel/trace/trace_events_filter.c
@@ -400,7 +400,6 @@ enum regex_type filter_parse_regex(char
for (i = 0; i < len; i++) {
if (buff[i] == '*') {
if (!i) {
- *search = buff + 1;
type = MATCH_END_ONLY;
} else if (i == len - 1) {
if (type == MATCH_END_ONLY)
@@ -410,14 +409,14 @@ enum regex_type filter_parse_regex(char
buff[i] = 0;
break;
} else { /* pattern continues, use full glob */
- type = MATCH_GLOB;
- break;
+ return MATCH_GLOB;
}
} else if (strchr("[?\\", buff[i])) {
- type = MATCH_GLOB;
- break;
+ return MATCH_GLOB;
}
}
+ if (buff[0] == '*')
+ *search = buff + 1;
return type;
}
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Joao Martins <[email protected]>
commit 29fee6eed2811ff1089b30fc579a2d19d78016ab upstream.
Commit fd8aa9095a95 ("xen: optimize xenbus driver for multiple concurrent
xenstore accesses") optimized xenbus concurrent accesses but in doing so
broke UABI of /dev/xen/xenbus. Through /dev/xen/xenbus applications are in
charge of xenbus message exchange with the correct header and body. Now,
after the mentioned commit the replies received by application will no
longer have the header req_id echoed back as it was on request (see
specification below for reference), because that particular field is being
overwritten by kernel.
struct xsd_sockmsg
{
uint32_t type; /* XS_??? */
uint32_t req_id;/* Request identifier, echoed in daemon's response. */
uint32_t tx_id; /* Transaction id (0 if not related to a transaction). */
uint32_t len; /* Length of data following this. */
/* Generally followed by nul-terminated string(s). */
};
Before there was only one request at a time so req_id could simply be
forwarded back and forth. To allow simultaneous requests we need a
different req_id for each message thus kernel keeps a monotonic increasing
counter for this field and is written on every request irrespective of
userspace value.
Forwarding again the req_id on userspace requests is not a solution because
we would open the possibility of userspace-generated req_id colliding with
kernel ones. So this patch instead takes another route which is to
artificially keep user req_id while keeping the xenbus logic as is. We do
that by saving the original req_id before xs_send(), use the private kernel
counter as req_id and then once reply comes and was validated, we restore
back the original req_id.
Cc: <[email protected]> # 4.11
Fixes: fd8aa9095a ("xen: optimize xenbus driver for multiple concurrent xenstore accesses")
Reported-by: Bhavesh Davda <[email protected]>
Signed-off-by: Joao Martins <[email protected]>
Reviewed-by: Juergen Gross <[email protected]>
Signed-off-by: Juergen Gross <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/xen/xenbus/xenbus.h | 1 +
drivers/xen/xenbus/xenbus_comms.c | 1 +
drivers/xen/xenbus/xenbus_xs.c | 3 +++
3 files changed, 5 insertions(+)
--- a/drivers/xen/xenbus/xenbus.h
+++ b/drivers/xen/xenbus/xenbus.h
@@ -76,6 +76,7 @@ struct xb_req_data {
struct list_head list;
wait_queue_head_t wq;
struct xsd_sockmsg msg;
+ uint32_t caller_req_id;
enum xsd_sockmsg_type type;
char *body;
const struct kvec *vec;
--- a/drivers/xen/xenbus/xenbus_comms.c
+++ b/drivers/xen/xenbus/xenbus_comms.c
@@ -309,6 +309,7 @@ static int process_msg(void)
goto out;
if (req->state == xb_req_state_wait_reply) {
+ req->msg.req_id = req->caller_req_id;
req->msg.type = state.msg.type;
req->msg.len = state.msg.len;
req->body = state.body;
--- a/drivers/xen/xenbus/xenbus_xs.c
+++ b/drivers/xen/xenbus/xenbus_xs.c
@@ -227,6 +227,8 @@ static void xs_send(struct xb_req_data *
req->state = xb_req_state_queued;
init_waitqueue_head(&req->wq);
+ /* Save the caller req_id and restore it later in the reply */
+ req->caller_req_id = req->msg.req_id;
req->msg.req_id = xs_request_enter(req);
mutex_lock(&xb_write_mutex);
@@ -310,6 +312,7 @@ static void *xs_talkv(struct xenbus_tran
req->num_vecs = num_vecs;
req->cb = xs_wake_up;
+ msg.req_id = 0;
msg.tx_id = t.id;
msg.type = type;
msg.len = 0;
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Lassi Ylikojola <[email protected]>
commit 5e35dc0338d85ccebacf3f77eca1e5dea73155e8 upstream.
Add quirk to ensure a sync endpoint is properly configured.
This patch is a fix for same symptoms on Behringer UFX1204 as patch
from Albertto Aquirre on Dec 8 2016 for Axe-Fx II.
Signed-off-by: Lassi Ylikojola <[email protected]>
Cc: <[email protected]>
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
sound/usb/pcm.c | 9 +++++++++
1 file changed, 9 insertions(+)
--- a/sound/usb/pcm.c
+++ b/sound/usb/pcm.c
@@ -357,6 +357,15 @@ static int set_sync_ep_implicit_fb_quirk
alts = &iface->altsetting[1];
goto add_sync_ep;
+ case USB_ID(0x1397, 0x0002):
+ ep = 0x81;
+ iface = usb_ifnum_to_if(dev, 1);
+
+ if (!iface || iface->num_altsetting == 0)
+ return -EINVAL;
+
+ alts = &iface->altsetting[1];
+ goto add_sync_ep;
}
if (attr == USB_ENDPOINT_SYNC_ASYNC &&
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Mikulas Patocka <[email protected]>
commit 7ac8ff95f48cbfa609a060fd6a1e361dd62feeb3 upstream.
IPv6 doesn't work on the MacchiatoBIN board. It is caused by broken
multicast address filter in the mvpp2 driver.
The driver loads doesn't load any multicast entries if "allmulti" is not
set. This condition should be reversed.
The condition !netdev_mc_empty(dev) is useless (because
netdev_for_each_mc_addr is nop if the list is empty).
This patch also fixes a possible overflow of the multicast list - if
mvpp2_prs_mac_da_accept fails, we set the allmulti flag and retry.
Signed-off-by: Mikulas Patocka <[email protected]>
Cc: [email protected]
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/marvell/mvpp2.c | 11 ++++++++---
1 file changed, 8 insertions(+), 3 deletions(-)
--- a/drivers/net/ethernet/marvell/mvpp2.c
+++ b/drivers/net/ethernet/marvell/mvpp2.c
@@ -6888,6 +6888,7 @@ static void mvpp2_set_rx_mode(struct net
int id = port->id;
bool allmulti = dev->flags & IFF_ALLMULTI;
+retry:
mvpp2_prs_mac_promisc_set(priv, id, dev->flags & IFF_PROMISC);
mvpp2_prs_mac_multi_set(priv, id, MVPP2_PE_MAC_MC_ALL, allmulti);
mvpp2_prs_mac_multi_set(priv, id, MVPP2_PE_MAC_MC_IP6, allmulti);
@@ -6895,9 +6896,13 @@ static void mvpp2_set_rx_mode(struct net
/* Remove all port->id's mcast enries */
mvpp2_prs_mcast_del_all(priv, id);
- if (allmulti && !netdev_mc_empty(dev)) {
- netdev_for_each_mc_addr(ha, dev)
- mvpp2_prs_mac_da_accept(priv, id, ha->addr, true);
+ if (!allmulti) {
+ netdev_for_each_mc_addr(ha, dev) {
+ if (mvpp2_prs_mac_da_accept(priv, id, ha->addr, true)) {
+ allmulti = true;
+ goto retry;
+ }
+ }
}
}
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Liu Bo <[email protected]>
commit e89166990f11c3f21e1649d760dd35f9e410321c upstream.
@cur_offset is not set back to what it should be (@cow_start) if
btrfs_next_leaf() returns something wrong, and the range [cow_start,
cur_offset) remains locked forever.
cc: <[email protected]>
Signed-off-by: Liu Bo <[email protected]>
Reviewed-by: Josef Bacik <[email protected]>
Signed-off-by: David Sterba <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/btrfs/inode.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
--- a/fs/btrfs/inode.c
+++ b/fs/btrfs/inode.c
@@ -1330,8 +1330,11 @@ next_slot:
leaf = path->nodes[0];
if (path->slots[0] >= btrfs_header_nritems(leaf)) {
ret = btrfs_next_leaf(root, path);
- if (ret < 0)
+ if (ret < 0) {
+ if (cow_start != (u64)-1)
+ cur_offset = cow_start;
goto error;
+ }
if (ret > 0)
break;
leaf = path->nodes[0];
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: yangbo lu <[email protected]>
commit dd3f6983b4a468efca9e8caa0e2b4aa20946d801 upstream.
SD clock should be disabled for clock value 0. It's not
right to just return. This may cause failure of signal
voltage switching.
Signed-off-by: Yangbo Lu <[email protected]>
Acked-by: Adrian Hunter <[email protected]>
Signed-off-by: Ulf Hansson <[email protected]>
Cc: Rasmus Villemoes <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/mmc/host/sdhci-of-esdhc.c | 58 +++++++++++++++++++-------------------
1 file changed, 30 insertions(+), 28 deletions(-)
--- a/drivers/mmc/host/sdhci-of-esdhc.c
+++ b/drivers/mmc/host/sdhci-of-esdhc.c
@@ -458,6 +458,33 @@ static unsigned int esdhc_of_get_min_clo
return clock / 256 / 16;
}
+static void esdhc_clock_enable(struct sdhci_host *host, bool enable)
+{
+ u32 val;
+ ktime_t timeout;
+
+ val = sdhci_readl(host, ESDHC_SYSTEM_CONTROL);
+
+ if (enable)
+ val |= ESDHC_CLOCK_SDCLKEN;
+ else
+ val &= ~ESDHC_CLOCK_SDCLKEN;
+
+ sdhci_writel(host, val, ESDHC_SYSTEM_CONTROL);
+
+ /* Wait max 20 ms */
+ timeout = ktime_add_ms(ktime_get(), 20);
+ val = ESDHC_CLOCK_STABLE;
+ while (!(sdhci_readl(host, ESDHC_PRSSTAT) & val)) {
+ if (ktime_after(ktime_get(), timeout)) {
+ pr_err("%s: Internal clock never stabilised.\n",
+ mmc_hostname(host->mmc));
+ break;
+ }
+ udelay(10);
+ }
+}
+
static void esdhc_of_set_clock(struct sdhci_host *host, unsigned int clock)
{
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
@@ -469,8 +496,10 @@ static void esdhc_of_set_clock(struct sd
host->mmc->actual_clock = 0;
- if (clock == 0)
+ if (clock == 0) {
+ esdhc_clock_enable(host, false);
return;
+ }
/* Workaround to start pre_div at 2 for VNN < VENDOR_V_23 */
if (esdhc->vendor_ver < VENDOR_V_23)
@@ -558,33 +587,6 @@ static void esdhc_pltfm_set_bus_width(st
sdhci_writel(host, ctrl, ESDHC_PROCTL);
}
-static void esdhc_clock_enable(struct sdhci_host *host, bool enable)
-{
- u32 val;
- ktime_t timeout;
-
- val = sdhci_readl(host, ESDHC_SYSTEM_CONTROL);
-
- if (enable)
- val |= ESDHC_CLOCK_SDCLKEN;
- else
- val &= ~ESDHC_CLOCK_SDCLKEN;
-
- sdhci_writel(host, val, ESDHC_SYSTEM_CONTROL);
-
- /* Wait max 20 ms */
- timeout = ktime_add_ms(ktime_get(), 20);
- val = ESDHC_CLOCK_STABLE;
- while (!(sdhci_readl(host, ESDHC_PRSSTAT) & val)) {
- if (ktime_after(ktime_get(), timeout)) {
- pr_err("%s: Internal clock never stabilised.\n",
- mmc_hostname(host->mmc));
- break;
- }
- udelay(10);
- }
-}
-
static void esdhc_reset(struct sdhci_host *host, u8 mask)
{
sdhci_reset(host, mask);
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Kailang Yang <[email protected]>
commit 61fcf8ece9b6b09450250c4ca40cc3b81a96a68d upstream.
Thinkpad Dock device support for ALC298 platform.
It need to use SSID for the quirk table.
Because IdeaPad also has ALC298 platform.
Use verb for the quirk table will confuse.
Signed-off-by: Kailang Yang <[email protected]>
Cc: <[email protected]>
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
sound/pci/hda/patch_realtek.c | 42 ++++++++++++++++++++++++++++++++++++++++++
1 file changed, 42 insertions(+)
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -4827,6 +4827,28 @@ static void alc_fixup_tpt440_dock(struct
}
}
+static void alc_fixup_tpt470_dock(struct hda_codec *codec,
+ const struct hda_fixup *fix, int action)
+{
+ static const struct hda_pintbl pincfgs[] = {
+ { 0x17, 0x21211010 }, /* dock headphone */
+ { 0x19, 0x21a11010 }, /* dock mic */
+ { }
+ };
+ struct alc_spec *spec = codec->spec;
+
+ if (action == HDA_FIXUP_ACT_PRE_PROBE) {
+ spec->parse_flags = HDA_PINCFG_NO_HP_FIXUP;
+ /* Enable DOCK device */
+ snd_hda_codec_write(codec, 0x17, 0,
+ AC_VERB_SET_CONFIG_DEFAULT_BYTES_3, 0);
+ /* Enable DOCK device */
+ snd_hda_codec_write(codec, 0x19, 0,
+ AC_VERB_SET_CONFIG_DEFAULT_BYTES_3, 0);
+ snd_hda_apply_pincfgs(codec, pincfgs);
+ }
+}
+
static void alc_shutup_dell_xps13(struct hda_codec *codec)
{
struct alc_spec *spec = codec->spec;
@@ -5301,6 +5323,7 @@ enum {
ALC700_FIXUP_INTEL_REFERENCE,
ALC274_FIXUP_DELL_BIND_DACS,
ALC274_FIXUP_DELL_AIO_LINEOUT_VERB,
+ ALC298_FIXUP_TPT470_DOCK,
};
static const struct hda_fixup alc269_fixups[] = {
@@ -6126,6 +6149,12 @@ static const struct hda_fixup alc269_fix
.chained = true,
.chain_id = ALC274_FIXUP_DELL_BIND_DACS
},
+ [ALC298_FIXUP_TPT470_DOCK] = {
+ .type = HDA_FIXUP_FUNC,
+ .v.func = alc_fixup_tpt470_dock,
+ .chained = true,
+ .chain_id = ALC293_FIXUP_LENOVO_SPK_NOISE
+ },
};
static const struct snd_pci_quirk alc269_fixup_tbl[] = {
@@ -6307,8 +6336,16 @@ static const struct snd_pci_quirk alc269
SND_PCI_QUIRK(0x17aa, 0x2218, "Thinkpad X1 Carbon 2nd", ALC292_FIXUP_TPT440_DOCK),
SND_PCI_QUIRK(0x17aa, 0x2223, "ThinkPad T550", ALC292_FIXUP_TPT440_DOCK),
SND_PCI_QUIRK(0x17aa, 0x2226, "ThinkPad X250", ALC292_FIXUP_TPT440_DOCK),
+ SND_PCI_QUIRK(0x17aa, 0x222d, "Thinkpad", ALC298_FIXUP_TPT470_DOCK),
+ SND_PCI_QUIRK(0x17aa, 0x222e, "Thinkpad", ALC298_FIXUP_TPT470_DOCK),
SND_PCI_QUIRK(0x17aa, 0x2231, "Thinkpad T560", ALC292_FIXUP_TPT460),
SND_PCI_QUIRK(0x17aa, 0x2233, "Thinkpad", ALC292_FIXUP_TPT460),
+ SND_PCI_QUIRK(0x17aa, 0x2245, "Thinkpad T470", ALC298_FIXUP_TPT470_DOCK),
+ SND_PCI_QUIRK(0x17aa, 0x2246, "Thinkpad", ALC298_FIXUP_TPT470_DOCK),
+ SND_PCI_QUIRK(0x17aa, 0x2247, "Thinkpad", ALC298_FIXUP_TPT470_DOCK),
+ SND_PCI_QUIRK(0x17aa, 0x224b, "Thinkpad", ALC298_FIXUP_TPT470_DOCK),
+ SND_PCI_QUIRK(0x17aa, 0x224c, "Thinkpad", ALC298_FIXUP_TPT470_DOCK),
+ SND_PCI_QUIRK(0x17aa, 0x224d, "Thinkpad", ALC298_FIXUP_TPT470_DOCK),
SND_PCI_QUIRK(0x17aa, 0x30bb, "ThinkCentre AIO", ALC233_FIXUP_LENOVO_LINE2_MIC_HOTKEY),
SND_PCI_QUIRK(0x17aa, 0x30e2, "ThinkCentre AIO", ALC233_FIXUP_LENOVO_LINE2_MIC_HOTKEY),
SND_PCI_QUIRK(0x17aa, 0x310c, "ThinkCentre Station", ALC294_FIXUP_LENOVO_MIC_LOCATION),
@@ -6329,7 +6366,12 @@ static const struct snd_pci_quirk alc269
SND_PCI_QUIRK(0x17aa, 0x5050, "Thinkpad T560p", ALC292_FIXUP_TPT460),
SND_PCI_QUIRK(0x17aa, 0x5051, "Thinkpad L460", ALC292_FIXUP_TPT460),
SND_PCI_QUIRK(0x17aa, 0x5053, "Thinkpad T460", ALC292_FIXUP_TPT460),
+ SND_PCI_QUIRK(0x17aa, 0x505d, "Thinkpad", ALC298_FIXUP_TPT470_DOCK),
+ SND_PCI_QUIRK(0x17aa, 0x505f, "Thinkpad", ALC298_FIXUP_TPT470_DOCK),
+ SND_PCI_QUIRK(0x17aa, 0x5062, "Thinkpad", ALC298_FIXUP_TPT470_DOCK),
SND_PCI_QUIRK(0x17aa, 0x5109, "Thinkpad", ALC269_FIXUP_LIMIT_INT_MIC_BOOST),
+ SND_PCI_QUIRK(0x17aa, 0x511e, "Thinkpad", ALC298_FIXUP_TPT470_DOCK),
+ SND_PCI_QUIRK(0x17aa, 0x511f, "Thinkpad", ALC298_FIXUP_TPT470_DOCK),
SND_PCI_QUIRK(0x17aa, 0x3bf8, "Quanta FL1", ALC269_FIXUP_PCM_44K),
SND_PCI_QUIRK(0x17aa, 0x9e54, "LENOVO NB", ALC269_FIXUP_LENOVO_EAPD),
SND_PCI_QUIRK(0x1b7d, 0xa831, "Ordissimo EVE2 ", ALC269VB_FIXUP_ORDISSIMO_EVE2), /* Also known as Malata PC-B1303 */
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Arnd Bergmann <[email protected]>
commit 5c1037196b9ee75897c211972de370ed1336ec8f upstream.
The ohci-hcd node has an interrupt number but no interrupt-parent,
leading to a warning with current dtc versions:
arch/arm/boot/dts/s5pv210-aquila.dtb: Warning (interrupts_property): Missing interrupt-parent for /soc/ohci@ec300000
arch/arm/boot/dts/s5pv210-goni.dtb: Warning (interrupts_property): Missing interrupt-parent for /soc/ohci@ec300000
arch/arm/boot/dts/s5pv210-smdkc110.dtb: Warning (interrupts_property): Missing interrupt-parent for /soc/ohci@ec300000
arch/arm/boot/dts/s5pv210-smdkv210.dtb: Warning (interrupts_property): Missing interrupt-parent for /soc/ohci@ec300000
arch/arm/boot/dts/s5pv210-torbreck.dtb: Warning (interrupts_property): Missing interrupt-parent for /soc/ohci@ec300000
As seen from the related exynos dts files, the ohci and ehci controllers
always share one interrupt number, and the number is the same here as
well, so setting the same interrupt-parent is the reasonable solution
here.
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Signed-off-by: Arnd Bergmann <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/arm/boot/dts/s5pv210.dtsi | 1 +
1 file changed, 1 insertion(+)
--- a/arch/arm/boot/dts/s5pv210.dtsi
+++ b/arch/arm/boot/dts/s5pv210.dtsi
@@ -463,6 +463,7 @@
compatible = "samsung,exynos4210-ohci";
reg = <0xec300000 0x100>;
interrupts = <23>;
+ interrupt-parent = <&vic1>;
clocks = <&clocks CLK_USB_HOST>;
clock-names = "usbhost";
#address-cells = <1>;
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Matthias Brugger <[email protected]>
commit 76a09ce214addb8ddc0f6d50dc1106a5f829e713 upstream.
The ethsys binding misses the reset-cells, this patch
adds this property.
Reviewed-by: Rob Herring <[email protected]>
Signed-off-by: Matthias Brugger <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/arm/boot/dts/mt7623.dtsi | 1 +
1 file changed, 1 insertion(+)
--- a/arch/arm/boot/dts/mt7623.dtsi
+++ b/arch/arm/boot/dts/mt7623.dtsi
@@ -753,6 +753,7 @@
"syscon";
reg = <0 0x1b000000 0 0x1000>;
#clock-cells = <1>;
+ #reset-cells = <1>;
};
eth: ethernet@1b100000 {
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Hannes Reinecke <[email protected]>
commit 81b6c999897919d5a16fedc018fe375dbab091c5 upstream.
As it turned out device_get() doesn't use kref_get_unless_zero(), so we
will be always getting a device pointer. Consequently, we need to check
for the device state in __scsi_remove_target() to avoid tripping over
deleted objects.
Fixes: fbce4d97fd43 ("scsi: fixup kernel warning during rmmod()")
Reported-by: Jason Yan <[email protected]>
Signed-off-by: Hannes Reinecke <[email protected]>
Reviewed-by: Bart Van Assche <[email protected]>
Reviewed-by: Ewan D. Milne <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Cc: Max Ivanov <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/scsi/scsi_sysfs.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
--- a/drivers/scsi/scsi_sysfs.c
+++ b/drivers/scsi/scsi_sysfs.c
@@ -1383,7 +1383,10 @@ static void __scsi_remove_target(struct
* check.
*/
if (sdev->channel != starget->channel ||
- sdev->id != starget->id ||
+ sdev->id != starget->id)
+ continue;
+ if (sdev->sdev_state == SDEV_DEL ||
+ sdev->sdev_state == SDEV_CANCEL ||
!get_device(&sdev->sdev_gendev))
continue;
spin_unlock_irqrestore(shost->host_lock, flags);
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Bjorn Andersson <[email protected]>
commit b0ab681285aa66064f2de5b74191c0cabba381ff upstream.
Add a missing #phy-cells to the dsi-phy, to silence dtc warning.
Cc: Archit Taneja <[email protected]>
Fixes: 305410ffd1b2 ("arm64: dts: msm8916: Add display support")
Signed-off-by: Bjorn Andersson <[email protected]>
Reviewed-by: Archit Taneja <[email protected]>
Signed-off-by: Andy Gross <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/arm64/boot/dts/qcom/msm8916.dtsi | 1 +
1 file changed, 1 insertion(+)
--- a/arch/arm64/boot/dts/qcom/msm8916.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi
@@ -901,6 +901,7 @@
"dsi_phy_regulator";
#clock-cells = <1>;
+ #phy-cells = <0>;
clocks = <&gcc GCC_MDSS_AHB_CLK>;
clock-names = "iface_clk";
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Arnd Bergmann <[email protected]>
commit 05e89fb576f580ac95e7a5d00bdb34830b09671a upstream.
It is no longer possible to build BT_HCIUART into the kernel
when SERIAL_DEV_BUS is a loadable module, even if none of the
SERIAL_DEV_BUS based implementations are selected:
drivers/bluetooth/hci_ldisc.o: In function `hci_uart_set_flow_control':
hci_ldisc.c:(.text+0xb40): undefined reference to `serdev_device_set_flow_control'
hci_ldisc.c:(.text+0xb5c): undefined reference to `serdev_device_set_tiocm'
This adds a dependency to avoid the broken configuration.
Fixes: 7841d554809b ("Bluetooth: hci_uart_set_flow_control: Fix NULL deref when using serdev")
Signed-off-by: Arnd Bergmann <[email protected]>
Signed-off-by: Marcel Holtmann <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/bluetooth/Kconfig | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/bluetooth/Kconfig
+++ b/drivers/bluetooth/Kconfig
@@ -66,6 +66,7 @@ config BT_HCIBTSDIO
config BT_HCIUART
tristate "HCI UART driver"
+ depends on SERIAL_DEV_BUS || !SERIAL_DEV_BUS
depends on TTY
help
Bluetooth HCI UART driver.
@@ -80,7 +81,6 @@ config BT_HCIUART
config BT_HCIUART_SERDEV
bool
depends on SERIAL_DEV_BUS && BT_HCIUART
- depends on SERIAL_DEV_BUS=y || SERIAL_DEV_BUS=BT_HCIUART
default y
config BT_HCIUART_H4
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Matthias Brugger <[email protected]>
commit ae72e95b5e4ded145bfc6926ad9457b74e3af41a upstream.
The hifsys and ethsys needs the definition of the reset-cells
property. Fix this.
Reviewed-by: Rob Herring <[email protected]>
Signed-off-by: Matthias Brugger <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/arm/boot/dts/mt2701.dtsi | 2 ++
1 file changed, 2 insertions(+)
--- a/arch/arm/boot/dts/mt2701.dtsi
+++ b/arch/arm/boot/dts/mt2701.dtsi
@@ -593,6 +593,7 @@
compatible = "mediatek,mt2701-hifsys", "syscon";
reg = <0 0x1a000000 0 0x1000>;
#clock-cells = <1>;
+ #reset-cells = <1>;
};
usb0: usb@1a1c0000 {
@@ -677,6 +678,7 @@
compatible = "mediatek,mt2701-ethsys", "syscon";
reg = <0 0x1b000000 0 0x1000>;
#clock-cells = <1>;
+ #reset-cells = <1>;
};
eth: ethernet@1b100000 {
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Liu Bo <[email protected]>
commit e8f1bc1493855e32b7a2a019decc3c353d94daf6 upstream.
This regression is introduced in
commit 3d48d9810de4 ("btrfs: Handle uninitialised inode eviction").
There are two problems,
a) it is ->destroy_inode() that does the final free on inode, not
->evict_inode(),
b) clear_inode() must be called before ->evict_inode() returns.
This could end up hitting BUG_ON(inode->i_state != (I_FREEING | I_CLEAR));
in evict() because I_CLEAR is set in clear_inode().
Fixes: commit 3d48d9810de4 ("btrfs: Handle uninitialised inode eviction")
Cc: <[email protected]> # v4.7-rc6+
Signed-off-by: Liu Bo <[email protected]>
Reviewed-by: Nikolay Borisov <[email protected]>
Reviewed-by: Josef Bacik <[email protected]>
Signed-off-by: David Sterba <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/btrfs/inode.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/fs/btrfs/inode.c
+++ b/fs/btrfs/inode.c
@@ -5318,7 +5318,7 @@ void btrfs_evict_inode(struct inode *ino
trace_btrfs_inode_evict(inode);
if (!root) {
- kmem_cache_free(btrfs_inode_cachep, BTRFS_I(inode));
+ clear_inode(inode);
return;
}
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Stefan Agner <[email protected]>
commit ea56fb282368ea08c2a313af6b55cb597aec4db1 upstream.
With commit 3cf32d180227 ("mtd: nand: vf610: switch to
mtd_ooblayout_ops") the driver started to use the NAND cores
default large page ooblayout. However, shortly after commit
6a623e076944 ("mtd: nand: add ooblayout for old hamming layout")
changed the default layout to the old hamming layout, which is
not what vf610_nfc is using. Specify the default large page
layout explicitly.
Fixes: 6a623e076944 ("mtd: nand: add ooblayout for old hamming layout")
Cc: <[email protected]> # v4.12+
Signed-off-by: Stefan Agner <[email protected]>
Signed-off-by: Boris Brezillon <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/mtd/nand/vf610_nfc.c | 6 ++----
1 file changed, 2 insertions(+), 4 deletions(-)
--- a/drivers/mtd/nand/vf610_nfc.c
+++ b/drivers/mtd/nand/vf610_nfc.c
@@ -752,10 +752,8 @@ static int vf610_nfc_probe(struct platfo
if (mtd->oobsize > 64)
mtd->oobsize = 64;
- /*
- * mtd->ecclayout is not specified here because we're using the
- * default large page ECC layout defined in NAND core.
- */
+ /* Use default large page ECC layout defined in NAND core */
+ mtd_set_ooblayout(mtd, &nand_ooblayout_lp_ops);
if (chip->ecc.strength == 32) {
nfc->ecc_mode = ECC_60_BYTE;
chip->ecc.bytes = 60;
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Marcin Nowakowski <[email protected]>
commit 67a3ba25aa955198196f40b76b329b3ab9ad415a upstream.
Commit 73fbc1eba7ff ("MIPS: fix mem=X@Y commandline processing") added a
fix to ensure that the memory range between PHYS_OFFSET and low memory
address specified by mem= cmdline argument is not later processed by
free_all_bootmem. This change was incorrect for systems where the
commandline specifies more than 1 mem argument, as it will cause all
memory between PHYS_OFFSET and each of the memory offsets to be marked
as reserved, which results in parts of the RAM marked as reserved
(Creator CI20's u-boot has a default commandline argument 'mem=256M@0x0
mem=768M@0x30000000').
Change the behaviour to ensure that only the range between PHYS_OFFSET
and the lowest start address of the memories is marked as protected.
This change also ensures that the range is marked protected even if it's
only defined through the devicetree and not only via commandline
arguments.
Reported-by: Mathieu Malaterre <[email protected]>
Signed-off-by: Marcin Nowakowski <[email protected]>
Fixes: 73fbc1eba7ff ("MIPS: fix mem=X@Y commandline processing")
Cc: Ralf Baechle <[email protected]>
Cc: [email protected]
Cc: <[email protected]> # v4.11+
Tested-by: Mathieu Malaterre <[email protected]>
Patchwork: https://patchwork.linux-mips.org/patch/18562/
Signed-off-by: James Hogan <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/mips/kernel/setup.c | 16 ++++++++++++----
1 file changed, 12 insertions(+), 4 deletions(-)
--- a/arch/mips/kernel/setup.c
+++ b/arch/mips/kernel/setup.c
@@ -374,6 +374,7 @@ static void __init bootmem_init(void)
unsigned long reserved_end;
unsigned long mapstart = ~0UL;
unsigned long bootmap_size;
+ phys_addr_t ramstart = (phys_addr_t)ULLONG_MAX;
bool bootmap_valid = false;
int i;
@@ -394,7 +395,8 @@ static void __init bootmem_init(void)
max_low_pfn = 0;
/*
- * Find the highest page frame number we have available.
+ * Find the highest page frame number we have available
+ * and the lowest used RAM address
*/
for (i = 0; i < boot_mem_map.nr_map; i++) {
unsigned long start, end;
@@ -406,6 +408,8 @@ static void __init bootmem_init(void)
end = PFN_DOWN(boot_mem_map.map[i].addr
+ boot_mem_map.map[i].size);
+ ramstart = min(ramstart, boot_mem_map.map[i].addr);
+
#ifndef CONFIG_HIGHMEM
/*
* Skip highmem here so we get an accurate max_low_pfn if low
@@ -435,6 +439,13 @@ static void __init bootmem_init(void)
mapstart = max(reserved_end, start);
}
+ /*
+ * Reserve any memory between the start of RAM and PHYS_OFFSET
+ */
+ if (ramstart > PHYS_OFFSET)
+ add_memory_region(PHYS_OFFSET, ramstart - PHYS_OFFSET,
+ BOOT_MEM_RESERVED);
+
if (min_low_pfn >= max_low_pfn)
panic("Incorrect memory mapping !!!");
if (min_low_pfn > ARCH_PFN_OFFSET) {
@@ -663,9 +674,6 @@ static int __init early_parse_mem(char *
add_memory_region(start, size, BOOT_MEM_RAM);
- if (start && start > PHYS_OFFSET)
- add_memory_region(PHYS_OFFSET, start - PHYS_OFFSET,
- BOOT_MEM_RESERVED);
return 0;
}
early_param("mem", early_parse_mem);
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Liu Bo <[email protected]>
commit 1846430c24d66e85cc58286b3319c82cd54debb2 upstream.
In cases that the whole fs flips into readonly status due to failures in
critical sections, then log tree's blocks are still dirty, and this leads
to a crash during umount time, the crash is about use-after-free,
umount
-> close_ctree
-> stop workers
-> iput(btree_inode)
-> iput_final
-> write_inode_now
-> ...
-> queue job on stop'd workers
cc: <[email protected]> v3.12+
Fixes: 681ae50917df ("Btrfs: cleanup reserved space when freeing tree log on error")
Signed-off-by: Liu Bo <[email protected]>
Reviewed-by: Josef Bacik <[email protected]>
Signed-off-by: David Sterba <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/btrfs/tree-log.c | 9 +++++++++
1 file changed, 9 insertions(+)
--- a/fs/btrfs/tree-log.c
+++ b/fs/btrfs/tree-log.c
@@ -2494,6 +2494,9 @@ static noinline int walk_down_log_tree(s
clean_tree_block(fs_info, next);
btrfs_wait_tree_block_writeback(next);
btrfs_tree_unlock(next);
+ } else {
+ if (test_and_clear_bit(EXTENT_BUFFER_DIRTY, &next->bflags))
+ clear_extent_buffer_dirty(next);
}
WARN_ON(root_owner !=
@@ -2574,6 +2577,9 @@ static noinline int walk_up_log_tree(str
clean_tree_block(fs_info, next);
btrfs_wait_tree_block_writeback(next);
btrfs_tree_unlock(next);
+ } else {
+ if (test_and_clear_bit(EXTENT_BUFFER_DIRTY, &next->bflags))
+ clear_extent_buffer_dirty(next);
}
WARN_ON(root_owner != BTRFS_TREE_LOG_OBJECTID);
@@ -2652,6 +2658,9 @@ static int walk_log_tree(struct btrfs_tr
clean_tree_block(fs_info, next);
btrfs_wait_tree_block_writeback(next);
btrfs_tree_unlock(next);
+ } else {
+ if (test_and_clear_bit(EXTENT_BUFFER_DIRTY, &next->bflags))
+ clear_extent_buffer_dirty(next);
}
WARN_ON(log->root_key.objectid !=
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Arnd Bergmann <[email protected]>
commit 5628a8ca14149ba4226e3bdce3a04c3b688435ad upstream.
According to the comment added to exynos_dt_pmu_match[] in commit
8b283c025443 ("ARM: exynos4/5: convert pmu wakeup to stacked domains"),
the RTC is not able to wake up the system through the PMU on Exynos5410,
unlike Exynos5420.
However, when the RTC DT node got added, it was a straight copy of
the Exynos5420 node, which now causes a warning from dtc.
This removes the incorrect interrupt-parent, which should get the
interrupt working and avoid the warning.
Fixes: e1e146b1b062 ("ARM: dts: exynos: Add RTC and I2C to Exynos5410")
Signed-off-by: Arnd Bergmann <[email protected]>
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/arm/boot/dts/exynos5410.dtsi | 1 -
1 file changed, 1 deletion(-)
--- a/arch/arm/boot/dts/exynos5410.dtsi
+++ b/arch/arm/boot/dts/exynos5410.dtsi
@@ -333,7 +333,6 @@
&rtc {
clocks = <&clock CLK_RTC>;
clock-names = "rtc";
- interrupt-parent = <&pmu_system_controller>;
status = "disabled";
};
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Greg Kurz <[email protected]>
commit 26d99834f89e76514076d9cd06f61e56e6a509b8 upstream.
When a 9p request is successfully flushed, the server is expected to just
mark it as used without sending a 9p reply (ie, without writing data into
the buffer). In this case, virtqueue_get_buf() will return len == 0 and
we must not report a REQ_STATUS_RCVD status to the client, otherwise the
client will erroneously assume the request has not been flushed.
Cc: [email protected]
Signed-off-by: Greg Kurz <[email protected]>
Signed-off-by: Michael S. Tsirkin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/9p/trans_virtio.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/net/9p/trans_virtio.c
+++ b/net/9p/trans_virtio.c
@@ -160,7 +160,8 @@ static void req_done(struct virtqueue *v
spin_unlock_irqrestore(&chan->lock, flags);
/* Wakeup if anyone waiting for VirtIO ring space. */
wake_up(chan->vc_wq);
- p9_client_cb(chan->client, req, REQ_STATUS_RCVD);
+ if (len)
+ p9_client_cb(chan->client, req, REQ_STATUS_RCVD);
}
}
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Liu Bo <[email protected]>
commit 900c9981680067573671ecc5cbfa7c5770be3a40 upstream.
The highest objectid, which is assigned to new inode, is decided at
the time of initializing fs roots. However, in cases where log replay
gets processed, the btree which fs root owns might be changed, so we
have to search it again for the highest objectid, otherwise creating
new inode would end up with -EEXIST.
cc: <[email protected]> v4.4-rc6+
Fixes: f32e48e92596 ("Btrfs: Initialize btrfs_root->highest_objectid when loading tree root and subvolume roots")
Signed-off-by: Liu Bo <[email protected]>
Reviewed-by: Josef Bacik <[email protected]>
Signed-off-by: David Sterba <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/btrfs/tree-log.c | 18 ++++++++++++++++++
1 file changed, 18 insertions(+)
--- a/fs/btrfs/tree-log.c
+++ b/fs/btrfs/tree-log.c
@@ -28,6 +28,7 @@
#include "hash.h"
#include "compression.h"
#include "qgroup.h"
+#include "inode-map.h"
/* magic values for the inode_only field in btrfs_log_inode:
*
@@ -5715,6 +5716,23 @@ again:
path);
}
+ if (!ret && wc.stage == LOG_WALK_REPLAY_ALL) {
+ struct btrfs_root *root = wc.replay_dest;
+
+ btrfs_release_path(path);
+
+ /*
+ * We have just replayed everything, and the highest
+ * objectid of fs roots probably has changed in case
+ * some inode_item's got replayed.
+ *
+ * root->objectid_mutex is not acquired as log replay
+ * could only happen during mount.
+ */
+ ret = btrfs_find_highest_objectid(root,
+ &root->highest_objectid);
+ }
+
key.offset = found_key.offset - 1;
wc.replay_dest->log_root = NULL;
free_extent_buffer(log->node);
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Liu Bo <[email protected]>
commit 1a932ef4e47984dee227834667b5ff5a334e4805 upstream.
I got these from running generic/475,
WARNING: CPU: 0 PID: 26384 at fs/btrfs/inode.c:3326 btrfs_orphan_commit_root+0x1ac/0x2b0 [btrfs]
BUG: unable to handle kernel NULL pointer dereference at 0000000000000010
IP: btrfs_block_rsv_release+0x1c/0x70 [btrfs]
Call Trace:
btrfs_orphan_release_metadata+0x9f/0x200 [btrfs]
btrfs_orphan_del+0x10d/0x170 [btrfs]
btrfs_setattr+0x500/0x640 [btrfs]
notify_change+0x7ae/0x870
do_truncate+0xca/0x130
vfs_truncate+0x2ee/0x3d0
do_sys_truncate+0xaf/0xf0
SyS_truncate+0xe/0x10
entry_SYSCALL_64_fastpath+0x1f/0x96
The race is between btrfs_orphan_commit_root and btrfs_orphan_del,
t1 t2
btrfs_orphan_commit_root btrfs_orphan_del
spin_lock
check (&root->orphan_inodes)
root->orphan_block_rsv = NULL;
spin_unlock
atomic_dec(&root->orphan_inodes);
access root->orphan_block_rsv
Accessing root->orphan_block_rsv must be done before decreasing
root->orphan_inodes.
cc: <[email protected]> v3.12+
Fixes: 703c88e03524 ("Btrfs: fix tracking of orphan inode count")
Signed-off-by: Liu Bo <[email protected]>
Reviewed-by: Josef Bacik <[email protected]>
Signed-off-by: David Sterba <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/btrfs/inode.c | 34 +++++++++++++++++++++-------------
1 file changed, 21 insertions(+), 13 deletions(-)
--- a/fs/btrfs/inode.c
+++ b/fs/btrfs/inode.c
@@ -3371,6 +3371,11 @@ int btrfs_orphan_add(struct btrfs_trans_
ret = btrfs_orphan_reserve_metadata(trans, inode);
ASSERT(!ret);
if (ret) {
+ /*
+ * dec doesn't need spin_lock as ->orphan_block_rsv
+ * would be released only if ->orphan_inodes is
+ * zero.
+ */
atomic_dec(&root->orphan_inodes);
clear_bit(BTRFS_INODE_ORPHAN_META_RESERVED,
&inode->runtime_flags);
@@ -3385,12 +3390,17 @@ int btrfs_orphan_add(struct btrfs_trans_
if (insert >= 1) {
ret = btrfs_insert_orphan_item(trans, root, btrfs_ino(inode));
if (ret) {
- atomic_dec(&root->orphan_inodes);
if (reserve) {
clear_bit(BTRFS_INODE_ORPHAN_META_RESERVED,
&inode->runtime_flags);
btrfs_orphan_release_metadata(inode);
}
+ /*
+ * btrfs_orphan_commit_root may race with us and set
+ * ->orphan_block_rsv to zero, in order to avoid that,
+ * decrease ->orphan_inodes after everything is done.
+ */
+ atomic_dec(&root->orphan_inodes);
if (ret != -EEXIST) {
clear_bit(BTRFS_INODE_HAS_ORPHAN_ITEM,
&inode->runtime_flags);
@@ -3422,28 +3432,26 @@ static int btrfs_orphan_del(struct btrfs
{
struct btrfs_root *root = inode->root;
int delete_item = 0;
- int release_rsv = 0;
int ret = 0;
- spin_lock(&root->orphan_lock);
if (test_and_clear_bit(BTRFS_INODE_HAS_ORPHAN_ITEM,
&inode->runtime_flags))
delete_item = 1;
+ if (delete_item && trans)
+ ret = btrfs_del_orphan_item(trans, root, btrfs_ino(inode));
+
if (test_and_clear_bit(BTRFS_INODE_ORPHAN_META_RESERVED,
&inode->runtime_flags))
- release_rsv = 1;
- spin_unlock(&root->orphan_lock);
+ btrfs_orphan_release_metadata(inode);
- if (delete_item) {
+ /*
+ * btrfs_orphan_commit_root may race with us and set ->orphan_block_rsv
+ * to zero, in order to avoid that, decrease ->orphan_inodes after
+ * everything is done.
+ */
+ if (delete_item)
atomic_dec(&root->orphan_inodes);
- if (trans)
- ret = btrfs_del_orphan_item(trans, root,
- btrfs_ino(inode));
- }
-
- if (release_rsv)
- btrfs_orphan_release_metadata(inode);
return ret;
}
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Florian Westphal <[email protected]>
commit 1c130ae00b769a2e2df41bad3d6051ee8234b636 upstream.
Mike Christie reports:
Starting in 4.14 iscsi logins will fail around 50% of the time.
Problem appears to be that iscsi_target_sk_data_ready() callback may
return without doing anything in case it finds the login work queue
is still blocked in sock_recvmsg().
Nicholas Bellinger says:
It would indicate users providing their own ->sk_data_ready() callback
must be responsible for waking up a kthread context blocked on
sock_recvmsg(..., MSG_WAITALL), when a second ->sk_data_ready() is
received before the first sock_recvmsg(..., MSG_WAITALL) completes.
So, do this and invoke the original data_ready() callback -- in
case of tcp sockets this takes care of waking the thread.
Disclaimer: I do not understand why this problem did not show up before
tcp prequeue removal.
(Drop WARN_ON usage - nab)
Reported-by: Mike Christie <[email protected]>
Bisected-by: Mike Christie <[email protected]>
Tested-by: Mike Christie <[email protected]>
Diagnosed-by: Nicholas Bellinger <[email protected]>
Fixes: e7942d0633c4 ("tcp: remove prequeue support")
Signed-off-by: Florian Westphal <[email protected]>
Cc: [email protected] # 4.14+
Signed-off-by: Nicholas Bellinger <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/target/iscsi/iscsi_target_nego.c | 3 +++
1 file changed, 3 insertions(+)
--- a/drivers/target/iscsi/iscsi_target_nego.c
+++ b/drivers/target/iscsi/iscsi_target_nego.c
@@ -432,6 +432,9 @@ static void iscsi_target_sk_data_ready(s
if (test_and_set_bit(LOGIN_FLAGS_READ_ACTIVE, &conn->login_flags)) {
write_unlock_bh(&sk->sk_callback_lock);
pr_debug("Got LOGIN_FLAGS_READ_ACTIVE=1, conn: %p >>>>\n", conn);
+ if (iscsi_target_sk_data_ready == conn->orig_data_ready)
+ return;
+ conn->orig_data_ready(sk);
return;
}
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: NeilBrown <[email protected]>
commit 8dd601fa8317243be887458c49f6c29c2f3d719f upstream.
dec_pending() is given an error status (possibly 0) to be recorded
against a bio. It can be called several times on the one 'struct
dm_io', and it is careful to only assign a non-zero error to
io->status. However when it then assigned io->status to bio->bi_status,
it is not careful and could overwrite a genuine error status with 0.
This can happen when chained bios are in use. If a bio is chained
beneath the bio that this dm_io is handling, the child bio might
complete and set bio->bi_status before the dm_io completes.
This has been possible since chained bios were introduced in 3.14, and
has become a lot easier to trigger with commit 18a25da84354 ("dm: ensure
bio submission follows a depth-first tree walk") as that commit caused
dm to start using chained bios itself.
A particular failure mode is that if a bio spans an 'error' target and a
working target, the 'error' fragment will complete instantly and set the
->bi_status, and the other fragment will normally complete a little
later, and will clear ->bi_status.
The fix is simply to only assign io_error to bio->bi_status when
io_error is not zero.
Reported-and-tested-by: Milan Broz <[email protected]>
Cc: [email protected] (v3.14+)
Signed-off-by: NeilBrown <[email protected]>
Signed-off-by: Mike Snitzer <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/md/dm.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/drivers/md/dm.c
+++ b/drivers/md/dm.c
@@ -815,7 +815,8 @@ static void dec_pending(struct dm_io *io
queue_io(md, bio);
} else {
/* done with normal IO or empty flush */
- bio->bi_status = io_error;
+ if (io_error)
+ bio->bi_status = io_error;
bio_endio(bio);
}
}
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Chuck Lever <[email protected]>
commit e89e8d8fcdc6751e86ccad794b052fe67e6ad619 upstream.
Michal Kalderon reports a BUG that occurs just after device removal:
[ 169.112490] rpcrdma: removing device qedr0 for 192.168.110.146:20049
[ 169.143909] BUG: unable to handle kernel NULL pointer dereference at 0000000000000010
[ 169.181837] IP: rpcrdma_dma_unmap_regbuf+0xa/0x60 [rpcrdma]
The RPC/RDMA client transport attempts to allocate some resources
on demand. Registered buffers are one such resource. These are
allocated (or re-allocated) by xprt_rdma_allocate to hold RPC Call
and Reply messages. A hardware resource is associated with each of
these buffers, as they can be used for a Send or Receive Work
Request.
If a device is removed from under an NFS/RDMA mount, the transport
layer is responsible for releasing all hardware resources before
the device can be finally unplugged. A BUG results when the NFS
mount hasn't yet seen much activity: the transport tries to release
resources that haven't yet been allocated.
rpcrdma_free_regbuf() already checks for this case, so just move
that check to cover the DEVICE_REMOVAL case as well.
Reported-by: Michal Kalderon <[email protected]>
Fixes: bebd031866ca ("xprtrdma: Support unplugging an HCA ...")
Signed-off-by: Chuck Lever <[email protected]>
Tested-by: Michal Kalderon <[email protected]>
Cc: [email protected] # v4.12+
Signed-off-by: Anna Schumaker <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/sunrpc/xprtrdma/verbs.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
--- a/net/sunrpc/xprtrdma/verbs.c
+++ b/net/sunrpc/xprtrdma/verbs.c
@@ -1331,6 +1331,9 @@ __rpcrdma_dma_map_regbuf(struct rpcrdma_
static void
rpcrdma_dma_unmap_regbuf(struct rpcrdma_regbuf *rb)
{
+ if (!rb)
+ return;
+
if (!rpcrdma_regbuf_is_mapped(rb))
return;
@@ -1346,9 +1349,6 @@ rpcrdma_dma_unmap_regbuf(struct rpcrdma_
void
rpcrdma_free_regbuf(struct rpcrdma_regbuf *rb)
{
- if (!rb)
- return;
-
rpcrdma_dma_unmap_regbuf(rb);
kfree(rb);
}
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Larry Finger <[email protected]>
commit c713fb071edc0efc01a955f65a006b0e1795d2eb upstream.
There has been a coding error in rtl8821ae since it was first introduced,
namely that an 8-bit register was read using a 16-bit read in
_rtl8821ae_dbi_read(). This error was fixed with commit 40b368af4b75
("rtlwifi: Fix alignment issues"); however, this change led to
instability in the connection. To restore stability, this change
was reverted in commit b8b8b16352cd ("rtlwifi: rtl8821ae: Fix connection
lost problem").
Unfortunately, the unaligned access causes machine checks in ARM
architecture, and we were finally forced to find the actual cause of the
problem on x86 platforms. Following a suggestion from Pkshih
<[email protected]>, it was found that increasing the ASPM L1
latency from 0 to 7 fixed the instability. This parameter was varied to
see if a smaller value would work; however, it appears that 7 is the
safest value. A new symbol is defined for this quantity, thus it can be
easily changed if necessary.
Fixes: b8b8b16352cd ("rtlwifi: rtl8821ae: Fix connection lost problem")
Cc: Stable <[email protected]> # 4.14+
Fix-suggested-by: Pkshih <[email protected]>
Signed-off-by: Larry Finger <[email protected]>
Tested-by: James Cameron <[email protected]> # x86_64 OLPC NL3
Signed-off-by: Kalle Valo <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/wireless/realtek/rtlwifi/rtl8821ae/hw.c | 5 +++--
drivers/net/wireless/realtek/rtlwifi/wifi.h | 1 +
2 files changed, 4 insertions(+), 2 deletions(-)
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8821ae/hw.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8821ae/hw.c
@@ -1122,7 +1122,7 @@ static u8 _rtl8821ae_dbi_read(struct rtl
}
if (0 == tmp) {
read_addr = REG_DBI_RDATA + addr % 4;
- ret = rtl_read_word(rtlpriv, read_addr);
+ ret = rtl_read_byte(rtlpriv, read_addr);
}
return ret;
}
@@ -1164,7 +1164,8 @@ static void _rtl8821ae_enable_aspm_back_
}
tmp = _rtl8821ae_dbi_read(rtlpriv, 0x70f);
- _rtl8821ae_dbi_write(rtlpriv, 0x70f, tmp | BIT(7));
+ _rtl8821ae_dbi_write(rtlpriv, 0x70f, tmp | BIT(7) |
+ ASPM_L1_LATENCY << 3);
tmp = _rtl8821ae_dbi_read(rtlpriv, 0x719);
_rtl8821ae_dbi_write(rtlpriv, 0x719, tmp | BIT(3) | BIT(4));
--- a/drivers/net/wireless/realtek/rtlwifi/wifi.h
+++ b/drivers/net/wireless/realtek/rtlwifi/wifi.h
@@ -99,6 +99,7 @@
#define RTL_USB_MAX_RX_COUNT 100
#define QBSS_LOAD_SIZE 5
#define MAX_WMMELE_LENGTH 64
+#define ASPM_L1_LATENCY 7
#define TOTAL_CAM_ENTRY 32
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Ray Strode <[email protected]>
commit 9428088c90b6f7d5edd2a1b0d742c75339b36f6e upstream.
QXL associates mouse state with its primary plane.
Destroying a primary plane and putting a new one in place has the side
effect of destroying the cursor as well.
This commit changes the driver to reapply the cursor any time a new
primary is created. It achieves this by keeping a reference to the
cursor bo on the qxl_crtc struct.
This fix is very similar to
commit 4532b241a4b7 ("drm/qxl: reapply cursor after SetCrtc calls")
which got implicitly reverted as part of implementing the atomic
modeset feature.
Cc: Gerd Hoffmann <[email protected]>
Cc: Dave Airlie <[email protected]>
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1512097
Fixes: 1277eed5fecb ("drm: qxl: Atomic phase 1: convert cursor to universal plane")
Cc: [email protected]
Signed-off-by: Ray Strode <[email protected]>
Signed-off-by: Dave Airlie <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpu/drm/qxl/qxl_display.c | 59 ++++++++++++++++++++++++++++++++++++++
drivers/gpu/drm/qxl/qxl_drv.h | 2 +
2 files changed, 61 insertions(+)
--- a/drivers/gpu/drm/qxl/qxl_display.c
+++ b/drivers/gpu/drm/qxl/qxl_display.c
@@ -289,6 +289,7 @@ static void qxl_crtc_destroy(struct drm_
{
struct qxl_crtc *qxl_crtc = to_qxl_crtc(crtc);
+ qxl_bo_unref(&qxl_crtc->cursor_bo);
drm_crtc_cleanup(crtc);
kfree(qxl_crtc);
}
@@ -495,6 +496,53 @@ static int qxl_primary_atomic_check(stru
return 0;
}
+static int qxl_primary_apply_cursor(struct drm_plane *plane)
+{
+ struct drm_device *dev = plane->dev;
+ struct qxl_device *qdev = dev->dev_private;
+ struct drm_framebuffer *fb = plane->state->fb;
+ struct qxl_crtc *qcrtc = to_qxl_crtc(plane->state->crtc);
+ struct qxl_cursor_cmd *cmd;
+ struct qxl_release *release;
+ int ret = 0;
+
+ if (!qcrtc->cursor_bo)
+ return 0;
+
+ ret = qxl_alloc_release_reserved(qdev, sizeof(*cmd),
+ QXL_RELEASE_CURSOR_CMD,
+ &release, NULL);
+ if (ret)
+ return ret;
+
+ ret = qxl_release_list_add(release, qcrtc->cursor_bo);
+ if (ret)
+ goto out_free_release;
+
+ ret = qxl_release_reserve_list(release, false);
+ if (ret)
+ goto out_free_release;
+
+ cmd = (struct qxl_cursor_cmd *)qxl_release_map(qdev, release);
+ cmd->type = QXL_CURSOR_SET;
+ cmd->u.set.position.x = plane->state->crtc_x + fb->hot_x;
+ cmd->u.set.position.y = plane->state->crtc_y + fb->hot_y;
+
+ cmd->u.set.shape = qxl_bo_physical_address(qdev, qcrtc->cursor_bo, 0);
+
+ cmd->u.set.visible = 1;
+ qxl_release_unmap(qdev, release, &cmd->release_info);
+
+ qxl_push_cursor_ring_release(qdev, release, QXL_CMD_CURSOR, false);
+ qxl_release_fence_buffer_objects(release);
+
+ return ret;
+
+out_free_release:
+ qxl_release_free(qdev, release);
+ return ret;
+}
+
static void qxl_primary_atomic_update(struct drm_plane *plane,
struct drm_plane_state *old_state)
{
@@ -510,6 +558,7 @@ static void qxl_primary_atomic_update(st
.x2 = qfb->base.width,
.y2 = qfb->base.height
};
+ int ret;
bool same_shadow = false;
if (old_state->fb) {
@@ -531,6 +580,11 @@ static void qxl_primary_atomic_update(st
if (!same_shadow)
qxl_io_destroy_primary(qdev);
bo_old->is_primary = false;
+
+ ret = qxl_primary_apply_cursor(plane);
+ if (ret)
+ DRM_ERROR(
+ "could not set cursor after creating primary");
}
if (!bo->is_primary) {
@@ -571,6 +625,7 @@ static void qxl_cursor_atomic_update(str
struct drm_device *dev = plane->dev;
struct qxl_device *qdev = dev->dev_private;
struct drm_framebuffer *fb = plane->state->fb;
+ struct qxl_crtc *qcrtc = to_qxl_crtc(plane->state->crtc);
struct qxl_release *release;
struct qxl_cursor_cmd *cmd;
struct qxl_cursor *cursor;
@@ -628,6 +683,10 @@ static void qxl_cursor_atomic_update(str
cmd->u.set.shape = qxl_bo_physical_address(qdev,
cursor_bo, 0);
cmd->type = QXL_CURSOR_SET;
+
+ qxl_bo_unref(&qcrtc->cursor_bo);
+ qcrtc->cursor_bo = cursor_bo;
+ cursor_bo = NULL;
} else {
ret = qxl_release_reserve_list(release, true);
--- a/drivers/gpu/drm/qxl/qxl_drv.h
+++ b/drivers/gpu/drm/qxl/qxl_drv.h
@@ -135,6 +135,8 @@ struct qxl_bo_list {
struct qxl_crtc {
struct drm_crtc base;
int index;
+
+ struct qxl_bo *cursor_bo;
};
struct qxl_output {
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Gerd Hoffmann <[email protected]>
commit 62676d10b483a2ff6e8b08c5e7c7d63a831343f5 upstream.
This patch changes the way the primary surface is used for dumb
framebuffers. Instead of configuring the bo itself as primary surface
a shadow bo is created and used instead. Framebuffers can share the
shadow bo in case they have the same format and resolution.
On atomic plane updates we don't have to update the primary surface in
case we pageflip from one framebuffer to another framebuffer which
shares the same shadow. This in turn avoids the flicker caused by the
primary-destroy + primary-create cycle, which is very annonying when
running wayland on qxl.
The qxl driver never actually writes to the shadow bo. It sends qxl
blit commands which update it though, and the spice server might
actually execute them (and thereby write to the shadow) in case the
local rendering is kicked for some reason. This happens for example in
case qemu is asked to write out a dump of the guest display (screendump
monitor command).
Signed-off-by: Gerd Hoffmann <[email protected]>
Reviewed-by: Dave Airlie <[email protected]>
Link: http://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpu/drm/qxl/qxl_cmd.c | 6 +++-
drivers/gpu/drm/qxl/qxl_display.c | 49 +++++++++++++++++++++++++++++++++++---
drivers/gpu/drm/qxl/qxl_drv.h | 2 +
drivers/gpu/drm/qxl/qxl_dumb.c | 1
4 files changed, 54 insertions(+), 4 deletions(-)
--- a/drivers/gpu/drm/qxl/qxl_cmd.c
+++ b/drivers/gpu/drm/qxl/qxl_cmd.c
@@ -388,7 +388,11 @@ void qxl_io_create_primary(struct qxl_de
create->width = bo->surf.width;
create->height = bo->surf.height;
create->stride = bo->surf.stride;
- create->mem = qxl_bo_physical_address(qdev, bo, offset);
+ if (bo->shadow) {
+ create->mem = qxl_bo_physical_address(qdev, bo->shadow, offset);
+ } else {
+ create->mem = qxl_bo_physical_address(qdev, bo, offset);
+ }
QXL_INFO(qdev, "%s: mem = %llx, from %p\n", __func__, create->mem,
bo->kptr);
--- a/drivers/gpu/drm/qxl/qxl_display.c
+++ b/drivers/gpu/drm/qxl/qxl_display.c
@@ -305,7 +305,9 @@ static const struct drm_crtc_funcs qxl_c
void qxl_user_framebuffer_destroy(struct drm_framebuffer *fb)
{
struct qxl_framebuffer *qxl_fb = to_qxl_framebuffer(fb);
+ struct qxl_bo *bo = gem_to_qxl_bo(qxl_fb->obj);
+ WARN_ON(bo->shadow);
drm_gem_object_unreference_unlocked(qxl_fb->obj);
drm_framebuffer_cleanup(fb);
kfree(qxl_fb);
@@ -508,6 +510,7 @@ static void qxl_primary_atomic_update(st
.x2 = qfb->base.width,
.y2 = qfb->base.height
};
+ bool same_shadow = false;
if (old_state->fb) {
qfb_old = to_qxl_framebuffer(old_state->fb);
@@ -519,15 +522,23 @@ static void qxl_primary_atomic_update(st
if (bo == bo_old)
return;
+ if (bo_old && bo_old->shadow && bo->shadow &&
+ bo_old->shadow == bo->shadow) {
+ same_shadow = true;
+ }
+
if (bo_old && bo_old->is_primary) {
- qxl_io_destroy_primary(qdev);
+ if (!same_shadow)
+ qxl_io_destroy_primary(qdev);
bo_old->is_primary = false;
}
if (!bo->is_primary) {
- qxl_io_create_primary(qdev, 0, bo);
+ if (!same_shadow)
+ qxl_io_create_primary(qdev, 0, bo);
bo->is_primary = true;
}
+
qxl_draw_dirty_fb(qdev, qfb, bo, 0, 0, &norect, 1, 1);
}
@@ -681,8 +692,9 @@ static void qxl_cursor_atomic_disable(st
static int qxl_plane_prepare_fb(struct drm_plane *plane,
struct drm_plane_state *new_state)
{
+ struct qxl_device *qdev = plane->dev->dev_private;
struct drm_gem_object *obj;
- struct qxl_bo *user_bo;
+ struct qxl_bo *user_bo, *old_bo = NULL;
int ret;
if (!new_state->fb)
@@ -691,6 +703,32 @@ static int qxl_plane_prepare_fb(struct d
obj = to_qxl_framebuffer(new_state->fb)->obj;
user_bo = gem_to_qxl_bo(obj);
+ if (plane->type == DRM_PLANE_TYPE_PRIMARY &&
+ user_bo->is_dumb && !user_bo->shadow) {
+ if (plane->state->fb) {
+ obj = to_qxl_framebuffer(plane->state->fb)->obj;
+ old_bo = gem_to_qxl_bo(obj);
+ }
+ if (old_bo && old_bo->shadow &&
+ user_bo->gem_base.size == old_bo->gem_base.size &&
+ plane->state->crtc == new_state->crtc &&
+ plane->state->crtc_w == new_state->crtc_w &&
+ plane->state->crtc_h == new_state->crtc_h &&
+ plane->state->src_x == new_state->src_x &&
+ plane->state->src_y == new_state->src_y &&
+ plane->state->src_w == new_state->src_w &&
+ plane->state->src_h == new_state->src_h &&
+ plane->state->rotation == new_state->rotation &&
+ plane->state->zpos == new_state->zpos) {
+ drm_gem_object_get(&old_bo->shadow->gem_base);
+ user_bo->shadow = old_bo->shadow;
+ } else {
+ qxl_bo_create(qdev, user_bo->gem_base.size,
+ true, true, QXL_GEM_DOMAIN_VRAM, NULL,
+ &user_bo->shadow);
+ }
+ }
+
ret = qxl_bo_pin(user_bo, QXL_GEM_DOMAIN_CPU, NULL);
if (ret)
return ret;
@@ -715,6 +753,11 @@ static void qxl_plane_cleanup_fb(struct
obj = to_qxl_framebuffer(old_state->fb)->obj;
user_bo = gem_to_qxl_bo(obj);
qxl_bo_unpin(user_bo);
+
+ if (user_bo->shadow && !user_bo->is_primary) {
+ drm_gem_object_put_unlocked(&user_bo->shadow->gem_base);
+ user_bo->shadow = NULL;
+ }
}
static const uint32_t qxl_cursor_plane_formats[] = {
--- a/drivers/gpu/drm/qxl/qxl_drv.h
+++ b/drivers/gpu/drm/qxl/qxl_drv.h
@@ -113,6 +113,8 @@ struct qxl_bo {
/* Constant after initialization */
struct drm_gem_object gem_base;
bool is_primary; /* is this now a primary surface */
+ bool is_dumb;
+ struct qxl_bo *shadow;
bool hw_surf_alloc;
struct qxl_surface surf;
uint32_t surface_id;
--- a/drivers/gpu/drm/qxl/qxl_dumb.c
+++ b/drivers/gpu/drm/qxl/qxl_dumb.c
@@ -63,6 +63,7 @@ int qxl_mode_dumb_create(struct drm_file
&handle);
if (r)
return r;
+ qobj->is_dumb = true;
args->pitch = pitch;
args->handle = handle;
return 0;
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Simon Gaiser <[email protected]>
commit 781198f1f373c3e350dbeb3af04a7d4c81c1b8d7 upstream.
Commit 82616f9599a7 ("xen: remove tests for pvh mode in pure pv paths")
removed the check for autotranslation from {set,clear}_foreign_p2m_mapping
but those are called by grant-table.c also on PVH/HVM guests.
Cc: <[email protected]> # 4.14
Fixes: 82616f9599a7 ("xen: remove tests for pvh mode in pure pv paths")
Signed-off-by: Simon Gaiser <[email protected]>
Reviewed-by: Juergen Gross <[email protected]>
Signed-off-by: Juergen Gross <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/xen/p2m.c | 6 ++++++
1 file changed, 6 insertions(+)
--- a/arch/x86/xen/p2m.c
+++ b/arch/x86/xen/p2m.c
@@ -694,6 +694,9 @@ int set_foreign_p2m_mapping(struct gntta
int i, ret = 0;
pte_t *pte;
+ if (xen_feature(XENFEAT_auto_translated_physmap))
+ return 0;
+
if (kmap_ops) {
ret = HYPERVISOR_grant_table_op(GNTTABOP_map_grant_ref,
kmap_ops, count);
@@ -736,6 +739,9 @@ int clear_foreign_p2m_mapping(struct gnt
{
int i, ret = 0;
+ if (xen_feature(XENFEAT_auto_translated_physmap))
+ return 0;
+
for (i = 0; i < count; i++) {
unsigned long mfn = __pfn_to_mfn(page_to_pfn(pages[i]));
unsigned long pfn = page_to_pfn(pages[i]);
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Zhouyi Zhou <[email protected]>
commit 06f29cc81f0350261f59643a505010531130eea0 upstream.
In the function __ext4_grp_locked_error(), __save_error_info()
is called to save error info in super block block, but does not sync
that information to disk to info the subsequence fsck after reboot.
This patch writes the error information to disk. After this patch,
I think there is no obvious EXT4 error handle branches which leads to
"Remounting filesystem read-only" will leave the disk partition miss
the subsequence fsck.
Signed-off-by: Zhouyi Zhou <[email protected]>
Signed-off-by: Theodore Ts'o <[email protected]>
Cc: [email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/ext4/super.c | 1 +
1 file changed, 1 insertion(+)
--- a/fs/ext4/super.c
+++ b/fs/ext4/super.c
@@ -742,6 +742,7 @@ __acquires(bitlock)
}
ext4_unlock_group(sb, grp);
+ ext4_commit_super(sb, 1);
ext4_handle_error(sb);
/*
* We only get here in the ERRORS_RO case; relocking the group
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Nicolas Pitre <[email protected]>
commit 724ba8b30b044aa0d94b1cd374fc15806cdd6f18 upstream.
When this method is set, the caller expects struct console_font fields
to be properly initialized when it returns. Leave it unset otherwise
nonsensical (leaked kernel stack) values are returned to user space.
Signed-off-by: Nicolas Pitre <[email protected]>
Cc: [email protected]
Signed-off-by: Bartlomiej Zolnierkiewicz <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/video/console/dummycon.c | 1 -
1 file changed, 1 deletion(-)
--- a/drivers/video/console/dummycon.c
+++ b/drivers/video/console/dummycon.c
@@ -67,7 +67,6 @@ const struct consw dummy_con = {
.con_switch = DUMMY,
.con_blank = DUMMY,
.con_font_set = DUMMY,
- .con_font_get = DUMMY,
.con_font_default = DUMMY,
.con_font_copy = DUMMY,
};
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Johan Hovold <[email protected]>
commit 9cb18db0701f6b74f0c45c23ad767b3ebebe37f6 upstream.
Fix child-node lookup during probe, which ended up searching the whole
device tree depth-first starting at the parent rather than just matching
on its children.
To make things worse, the parent display node was also prematurely
freed.
Note that the display and timings node references are never put after a
successful dt-initialisation so the nodes would leak on later probe
deferrals and on driver unbind.
Fixes: b985172b328a ("video: atmel_lcdfb: add device tree suport")
Cc: stable <[email protected]> # 3.13
Cc: Jean-Christophe PLAGNIOL-VILLARD <[email protected]>
Cc: Nicolas Ferre <[email protected]>
Cc: Alexandre Belloni <[email protected]>
Signed-off-by: Johan Hovold <[email protected]>
Signed-off-by: Bartlomiej Zolnierkiewicz <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/video/fbdev/atmel_lcdfb.c | 8 +++++++-
1 file changed, 7 insertions(+), 1 deletion(-)
--- a/drivers/video/fbdev/atmel_lcdfb.c
+++ b/drivers/video/fbdev/atmel_lcdfb.c
@@ -1119,7 +1119,7 @@ static int atmel_lcdfb_of_init(struct at
goto put_display_node;
}
- timings_np = of_find_node_by_name(display_np, "display-timings");
+ timings_np = of_get_child_by_name(display_np, "display-timings");
if (!timings_np) {
dev_err(dev, "failed to find display-timings node\n");
ret = -ENODEV;
@@ -1140,6 +1140,12 @@ static int atmel_lcdfb_of_init(struct at
fb_add_videomode(&fb_vm, &info->modelist);
}
+ /*
+ * FIXME: Make sure we are not referencing any fields in display_np
+ * and timings_np and drop our references to them before returning to
+ * avoid leaking the nodes on probe deferral and driver unbind.
+ */
+
return 0;
put_timings_node:
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Will Deacon <[email protected]>
commit 8fa80c503b484ddc1abbd10c7cb2ab81f3824a50 upstream.
For architectures providing their own implementation of
array_index_mask_nospec() in asm/barrier.h, attempting to use WARN_ONCE() to
complain about out-of-range parameters using WARN_ON() results in a mess
of mutually-dependent include files.
Rather than unpick the dependencies, simply have the core code in nospec.h
perform the checking for us.
Signed-off-by: Will Deacon <[email protected]>
Acked-by: Thomas Gleixner <[email protected]>
Cc: Dan Williams <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Ingo Molnar <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
include/linux/nospec.h | 36 +++++++++++++++++++++---------------
1 file changed, 21 insertions(+), 15 deletions(-)
--- a/include/linux/nospec.h
+++ b/include/linux/nospec.h
@@ -20,20 +20,6 @@ static inline unsigned long array_index_
unsigned long size)
{
/*
- * Warn developers about inappropriate array_index_nospec() usage.
- *
- * Even if the CPU speculates past the WARN_ONCE branch, the
- * sign bit of @index is taken into account when generating the
- * mask.
- *
- * This warning is compiled out when the compiler can infer that
- * @index and @size are less than LONG_MAX.
- */
- if (WARN_ONCE(index > LONG_MAX || size > LONG_MAX,
- "array_index_nospec() limited to range of [0, LONG_MAX]\n"))
- return 0;
-
- /*
* Always calculate and emit the mask even if the compiler
* thinks the mask is not needed. The compiler does not take
* into account the value of @index under speculation.
@@ -44,6 +30,26 @@ static inline unsigned long array_index_
#endif
/*
+ * Warn developers about inappropriate array_index_nospec() usage.
+ *
+ * Even if the CPU speculates past the WARN_ONCE branch, the
+ * sign bit of @index is taken into account when generating the
+ * mask.
+ *
+ * This warning is compiled out when the compiler can infer that
+ * @index and @size are less than LONG_MAX.
+ */
+#define array_index_mask_nospec_check(index, size) \
+({ \
+ if (WARN_ONCE(index > LONG_MAX || size > LONG_MAX, \
+ "array_index_nospec() limited to range of [0, LONG_MAX]\n")) \
+ _mask = 0; \
+ else \
+ _mask = array_index_mask_nospec(index, size); \
+ _mask; \
+})
+
+/*
* array_index_nospec - sanitize an array index after a bounds check
*
* For a code sequence like:
@@ -61,7 +67,7 @@ static inline unsigned long array_index_
({ \
typeof(index) _i = (index); \
typeof(size) _s = (size); \
- unsigned long _mask = array_index_mask_nospec(_i, _s); \
+ unsigned long _mask = array_index_mask_nospec_check(_i, _s); \
\
BUILD_BUG_ON(sizeof(_i) > sizeof(long)); \
BUILD_BUG_ON(sizeof(_s) > sizeof(long)); \
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Miklos Szeredi <[email protected]>
commit cf5eebae2cd28d37581507668605f4d23cd7218d upstream.
When resetting iterator on a zero offset we need to discard any data
already in the buffer (count), and private state of the iterator (version).
For example this bug results in first line being repeated in /proc/mounts
if doing a zero size read before a non-zero size read.
Reported-by: Rich Felker <[email protected]>
Signed-off-by: Miklos Szeredi <[email protected]>
Fixes: e522751d605d ("seq_file: reset iterator to first record for zero offset")
Cc: <[email protected]> # v4.10
Signed-off-by: Al Viro <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/seq_file.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
--- a/fs/seq_file.c
+++ b/fs/seq_file.c
@@ -181,8 +181,11 @@ ssize_t seq_read(struct file *file, char
* if request is to read from zero offset, reset iterator to first
* record as it might have been already advanced by previous requests
*/
- if (*ppos == 0)
+ if (*ppos == 0) {
m->index = 0;
+ m->version = 0;
+ m->count = 0;
+ }
/* Don't assume *ppos is where we left it */
if (unlikely(*ppos != m->read_pos)) {
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Dan Williams <[email protected]>
commit be3233fbfcb8f5acb6e3bcd0895c3ef9e100d470 upstream.
Allow the compiler to handle @size as an immediate value or memory
directly rather than allocating a register.
Reported-by: Linus Torvalds <[email protected]>
Signed-off-by: Dan Williams <[email protected]>
Cc: Andy Lutomirski <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Link: http://lkml.kernel.org/r/151797010204.1289.1510000292250184993.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Ingo Molnar <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/include/asm/barrier.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/arch/x86/include/asm/barrier.h
+++ b/arch/x86/include/asm/barrier.h
@@ -40,7 +40,7 @@ static inline unsigned long array_index_
asm ("cmp %1,%2; sbb %0,%0;"
:"=r" (mask)
- :"r"(size),"r" (index)
+ :"g"(size),"r" (index)
:"cc");
return mask;
}
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jerome Brunet <[email protected]>
commit fe0e58048f005fdce315eb4d185e5c160be4ac01 upstream.
This reverts commit 0a44697627d17a66d7dc98f17aeca07ca79c5c20.
This commit was initially intended to fix problems with hs200 and hs400
on some boards, mainly the odroid-c2. The OC2 (Rev 0.2) I have performs
well in this modes, so I could not confirm these issues.
We've had several reports about the issues being still present on (some)
OC2, so apparently, this change does not do what it was supposed to do.
Maybe the eMMC signal quality is on the edge on the board. This may
explain the variability we see in term of stability, but this is just a
guess. Lowering the max_frequency to 100Mhz seems to do trick for those
affected by the issue
Worse, the commit created new issues (CRC errors and hangs) on other
boards, such as the kvim 1 and 2, the p200 or the libretech-cc.
According to amlogic, the Tx phase should not be tuned and left in its
default configuration, so it is best to just revert the commit.
Fixes: 0a44697627d1 ("mmc: meson-gx: include tx phase in the tuning process")
Cc: <[email protected]> # 4.14+
Signed-off-by: Jerome Brunet <[email protected]>
Signed-off-by: Ulf Hansson <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/mmc/host/meson-gx-mmc.c | 19 +------------------
1 file changed, 1 insertion(+), 18 deletions(-)
--- a/drivers/mmc/host/meson-gx-mmc.c
+++ b/drivers/mmc/host/meson-gx-mmc.c
@@ -716,22 +716,6 @@ static int meson_mmc_clk_phase_tuning(st
static int meson_mmc_execute_tuning(struct mmc_host *mmc, u32 opcode)
{
struct meson_host *host = mmc_priv(mmc);
- int ret;
-
- /*
- * If this is the initial tuning, try to get a sane Rx starting
- * phase before doing the actual tuning.
- */
- if (!mmc->doing_retune) {
- ret = meson_mmc_clk_phase_tuning(mmc, opcode, host->rx_clk);
-
- if (ret)
- return ret;
- }
-
- ret = meson_mmc_clk_phase_tuning(mmc, opcode, host->tx_clk);
- if (ret)
- return ret;
return meson_mmc_clk_phase_tuning(mmc, opcode, host->rx_clk);
}
@@ -762,9 +746,8 @@ static void meson_mmc_set_ios(struct mmc
if (!IS_ERR(mmc->supply.vmmc))
mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, ios->vdd);
- /* Reset phases */
+ /* Reset rx phase */
clk_set_phase(host->rx_clk, 0);
- clk_set_phase(host->tx_clk, 270);
break;
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Dan Carpenter <[email protected]>
commit 9de29eac8d2189424d81c0d840cd0469aa3d41c8 upstream.
If i == ARRAY_SIZE(mitigation_options) then we accidentally print
garbage from one space beyond the end of the mitigation_options[] array.
Signed-off-by: Dan Carpenter <[email protected]>
Cc: Andy Lutomirski <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: David Woodhouse <[email protected]>
Cc: Greg Kroah-Hartman <[email protected]>
Cc: KarimAllah Ahmed <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: [email protected]
Fixes: 9005c6834c0f ("x86/spectre: Simplify spectre_v2 command line parsing")
Link: http://lkml.kernel.org/r/20180214071416.GA26677@mwanda
Signed-off-by: Ingo Molnar <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/kernel/cpu/bugs.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/arch/x86/kernel/cpu/bugs.c
+++ b/arch/x86/kernel/cpu/bugs.c
@@ -174,7 +174,7 @@ static enum spectre_v2_mitigation_cmd __
}
if (i >= ARRAY_SIZE(mitigation_options)) {
- pr_err("unknown option (%s). Switching to AUTO select\n", mitigation_options[i].option);
+ pr_err("unknown option (%s). Switching to AUTO select\n", arg);
return SPECTRE_V2_CMD_AUTO;
}
}
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Dominik Brodowski <[email protected]>
commit 2cbc0d66de0480449c75636f55697c7ff3af61fc upstream.
On 64-bit builds, we should not rely on "int $0x80" working (it only does if
CONFIG_IA32_EMULATION=y is enabled).
Without this patch, the move test may succeed, but the "int $0x80" causes
a segfault, resulting in a false negative output of this self-test.
Signed-off-by: Dominik Brodowski <[email protected]>
Cc: Andy Lutomirski <[email protected]>
Cc: Dmitry Safonov <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: [email protected]
Cc: [email protected]
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Ingo Molnar <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
tools/testing/selftests/x86/test_mremap_vdso.c | 4 ++++
1 file changed, 4 insertions(+)
--- a/tools/testing/selftests/x86/test_mremap_vdso.c
+++ b/tools/testing/selftests/x86/test_mremap_vdso.c
@@ -90,8 +90,12 @@ int main(int argc, char **argv, char **e
vdso_size += PAGE_SIZE;
}
+#ifdef __i386__
/* Glibc is likely to explode now - exit with raw syscall */
asm volatile ("int $0x80" : : "a" (__NR_exit), "b" (!!ret));
+#else /* __x86_64__ */
+ syscall(SYS_exit, ret);
+#endif
} else {
int status;
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Shanker Donthineni <[email protected]>
commit 16e574d762ac5512eb922ac0ac5eed360b7db9d8 upstream.
References to CPU part number MIDR_QCOM_FALKOR were dropped from the
mailing list patch due to mainline/arm64 branch dependency. So this
patch adds the missing part number.
Fixes: ec82b567a74f ("arm64: Implement branch predictor hardening for Falkor")
Acked-by: Marc Zyngier <[email protected]>
Signed-off-by: Shanker Donthineni <[email protected]>
Signed-off-by: Catalin Marinas <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/arm64/kernel/cpu_errata.c | 9 +++++++++
arch/arm64/kvm/hyp/switch.c | 4 +++-
2 files changed, 12 insertions(+), 1 deletion(-)
--- a/arch/arm64/kernel/cpu_errata.c
+++ b/arch/arm64/kernel/cpu_errata.c
@@ -408,6 +408,15 @@ const struct arm64_cpu_capabilities arm6
},
{
.capability = ARM64_HARDEN_BRANCH_PREDICTOR,
+ MIDR_ALL_VERSIONS(MIDR_QCOM_FALKOR),
+ .enable = qcom_enable_link_stack_sanitization,
+ },
+ {
+ .capability = ARM64_HARDEN_BP_POST_GUEST_EXIT,
+ MIDR_ALL_VERSIONS(MIDR_QCOM_FALKOR),
+ },
+ {
+ .capability = ARM64_HARDEN_BRANCH_PREDICTOR,
MIDR_ALL_VERSIONS(MIDR_BRCM_VULCAN),
.enable = enable_smccc_arch_workaround_1,
},
--- a/arch/arm64/kvm/hyp/switch.c
+++ b/arch/arm64/kvm/hyp/switch.c
@@ -371,8 +371,10 @@ again:
u32 midr = read_cpuid_id();
/* Apply BTAC predictors mitigation to all Falkor chips */
- if ((midr & MIDR_CPU_MODEL_MASK) == MIDR_QCOM_FALKOR_V1)
+ if (((midr & MIDR_CPU_MODEL_MASK) == MIDR_QCOM_FALKOR) ||
+ ((midr & MIDR_CPU_MODEL_MASK) == MIDR_QCOM_FALKOR_V1)) {
__qcom_hyp_sanitize_btac_predictors();
+ }
}
fp_enabled = __fpsimd_enabled();
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Levin, Alexander (Sasha Levin) <[email protected]>
commit 4950276672fce5c241857540f8561c440663673d upstream.
Patch series "kmemcheck: kill kmemcheck", v2.
As discussed at LSF/MM, kill kmemcheck.
KASan is a replacement that is able to work without the limitation of
kmemcheck (single CPU, slow). KASan is already upstream.
We are also not aware of any users of kmemcheck (or users who don't
consider KASan as a suitable replacement).
The only objection was that since KASAN wasn't supported by all GCC
versions provided by distros at that time we should hold off for 2
years, and try again.
Now that 2 years have passed, and all distros provide gcc that supports
KASAN, kill kmemcheck again for the very same reasons.
This patch (of 4):
Remove kmemcheck annotations, and calls to kmemcheck from the kernel.
[[email protected]: correctly remove kmemcheck call from dma_map_sg_attrs]
Link: http://lkml.kernel.org/r/[email protected]
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
Cc: Alexander Potapenko <[email protected]>
Cc: Eric W. Biederman <[email protected]>
Cc: Michal Hocko <[email protected]>
Cc: Pekka Enberg <[email protected]>
Cc: Steven Rostedt <[email protected]>
Cc: Tim Hansen <[email protected]>
Cc: Vegard Nossum <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/arm/include/asm/dma-iommu.h | 1 -
arch/openrisc/include/asm/dma-mapping.h | 1 -
arch/x86/Makefile | 5 -----
arch/x86/include/asm/dma-mapping.h | 1 -
arch/x86/include/asm/xor.h | 5 +----
arch/x86/kernel/traps.c | 5 -----
arch/x86/mm/fault.c | 6 ------
drivers/char/random.c | 1 -
drivers/misc/c2port/core.c | 2 --
fs/dcache.c | 2 --
include/linux/c2port.h | 4 ----
include/linux/dma-mapping.h | 8 +-------
include/linux/filter.h | 2 --
include/linux/mm_types.h | 8 --------
include/linux/net.h | 3 ---
include/linux/ring_buffer.h | 3 ---
include/linux/skbuff.h | 3 ---
include/net/inet_sock.h | 3 ---
include/net/inet_timewait_sock.h | 4 ----
include/net/sock.h | 3 ---
init/main.c | 1 -
kernel/bpf/core.c | 6 ------
kernel/locking/lockdep.c | 3 ---
kernel/trace/ring_buffer.c | 3 ---
mm/kmemleak.c | 9 ---------
mm/page_alloc.c | 14 --------------
mm/slab.c | 14 --------------
mm/slab.h | 2 --
mm/slub.c | 20 --------------------
net/core/skbuff.c | 5 -----
net/core/sock.c | 2 --
net/ipv4/inet_timewait_sock.c | 3 ---
net/ipv4/tcp_input.c | 1 -
net/socket.c | 1 -
34 files changed, 2 insertions(+), 152 deletions(-)
--- a/arch/arm/include/asm/dma-iommu.h
+++ b/arch/arm/include/asm/dma-iommu.h
@@ -7,7 +7,6 @@
#include <linux/mm_types.h>
#include <linux/scatterlist.h>
#include <linux/dma-debug.h>
-#include <linux/kmemcheck.h>
#include <linux/kref.h>
#define ARM_MAPPING_ERROR (~(dma_addr_t)0x0)
--- a/arch/openrisc/include/asm/dma-mapping.h
+++ b/arch/openrisc/include/asm/dma-mapping.h
@@ -23,7 +23,6 @@
*/
#include <linux/dma-debug.h>
-#include <linux/kmemcheck.h>
#include <linux/dma-mapping.h>
extern const struct dma_map_ops or1k_dma_map_ops;
--- a/arch/x86/Makefile
+++ b/arch/x86/Makefile
@@ -158,11 +158,6 @@ ifdef CONFIG_X86_X32
endif
export CONFIG_X86_X32_ABI
-# Don't unroll struct assignments with kmemcheck enabled
-ifeq ($(CONFIG_KMEMCHECK),y)
- KBUILD_CFLAGS += $(call cc-option,-fno-builtin-memcpy)
-endif
-
#
# If the function graph tracer is used with mcount instead of fentry,
# '-maccumulate-outgoing-args' is needed to prevent a GCC bug
--- a/arch/x86/include/asm/dma-mapping.h
+++ b/arch/x86/include/asm/dma-mapping.h
@@ -7,7 +7,6 @@
* Documentation/DMA-API.txt for documentation.
*/
-#include <linux/kmemcheck.h>
#include <linux/scatterlist.h>
#include <linux/dma-debug.h>
#include <asm/io.h>
--- a/arch/x86/include/asm/xor.h
+++ b/arch/x86/include/asm/xor.h
@@ -1,7 +1,4 @@
-#ifdef CONFIG_KMEMCHECK
-/* kmemcheck doesn't handle MMX/SSE/SSE2 instructions */
-# include <asm-generic/xor.h>
-#elif !defined(_ASM_X86_XOR_H)
+#ifndef _ASM_X86_XOR_H
#define _ASM_X86_XOR_H
/*
--- a/arch/x86/kernel/traps.c
+++ b/arch/x86/kernel/traps.c
@@ -42,7 +42,6 @@
#include <linux/edac.h>
#endif
-#include <asm/kmemcheck.h>
#include <asm/stacktrace.h>
#include <asm/processor.h>
#include <asm/debugreg.h>
@@ -764,10 +763,6 @@ dotraplinkage void do_debug(struct pt_re
if (!dr6 && user_mode(regs))
user_icebp = 1;
- /* Catch kmemcheck conditions! */
- if ((dr6 & DR_STEP) && kmemcheck_trap(regs))
- goto exit;
-
/* Store the virtualized DR6 value */
tsk->thread.debugreg6 = dr6;
--- a/arch/x86/mm/fault.c
+++ b/arch/x86/mm/fault.c
@@ -20,7 +20,6 @@
#include <asm/cpufeature.h> /* boot_cpu_has, ... */
#include <asm/traps.h> /* dotraplinkage, ... */
#include <asm/pgalloc.h> /* pgd_*(), ... */
-#include <asm/kmemcheck.h> /* kmemcheck_*(), ... */
#include <asm/fixmap.h> /* VSYSCALL_ADDR */
#include <asm/vsyscall.h> /* emulate_vsyscall */
#include <asm/vm86.h> /* struct vm86 */
@@ -1257,8 +1256,6 @@ __do_page_fault(struct pt_regs *regs, un
* Detect and handle instructions that would cause a page fault for
* both a tracked kernel page and a userspace page.
*/
- if (kmemcheck_active(regs))
- kmemcheck_hide(regs);
prefetchw(&mm->mmap_sem);
if (unlikely(kmmio_fault(regs, address)))
@@ -1281,9 +1278,6 @@ __do_page_fault(struct pt_regs *regs, un
if (!(error_code & (X86_PF_RSVD | X86_PF_USER | X86_PF_PROT))) {
if (vmalloc_fault(address) >= 0)
return;
-
- if (kmemcheck_fault(regs, address, error_code))
- return;
}
/* Can handle a stale RO->RW TLB: */
--- a/drivers/char/random.c
+++ b/drivers/char/random.c
@@ -259,7 +259,6 @@
#include <linux/cryptohash.h>
#include <linux/fips.h>
#include <linux/ptrace.h>
-#include <linux/kmemcheck.h>
#include <linux/workqueue.h>
#include <linux/irq.h>
#include <linux/syscalls.h>
--- a/drivers/misc/c2port/core.c
+++ b/drivers/misc/c2port/core.c
@@ -15,7 +15,6 @@
#include <linux/errno.h>
#include <linux/err.h>
#include <linux/kernel.h>
-#include <linux/kmemcheck.h>
#include <linux/ctype.h>
#include <linux/delay.h>
#include <linux/idr.h>
@@ -904,7 +903,6 @@ struct c2port_device *c2port_device_regi
return ERR_PTR(-EINVAL);
c2dev = kmalloc(sizeof(struct c2port_device), GFP_KERNEL);
- kmemcheck_annotate_bitfield(c2dev, flags);
if (unlikely(!c2dev))
return ERR_PTR(-ENOMEM);
--- a/fs/dcache.c
+++ b/fs/dcache.c
@@ -2705,8 +2705,6 @@ static void swap_names(struct dentry *de
*/
unsigned int i;
BUILD_BUG_ON(!IS_ALIGNED(DNAME_INLINE_LEN, sizeof(long)));
- kmemcheck_mark_initialized(dentry->d_iname, DNAME_INLINE_LEN);
- kmemcheck_mark_initialized(target->d_iname, DNAME_INLINE_LEN);
for (i = 0; i < DNAME_INLINE_LEN / sizeof(long); i++) {
swap(((long *) &dentry->d_iname)[i],
((long *) &target->d_iname)[i]);
--- a/include/linux/c2port.h
+++ b/include/linux/c2port.h
@@ -9,8 +9,6 @@
* the Free Software Foundation
*/
-#include <linux/kmemcheck.h>
-
#define C2PORT_NAME_LEN 32
struct device;
@@ -22,10 +20,8 @@ struct device;
/* Main struct */
struct c2port_ops;
struct c2port_device {
- kmemcheck_bitfield_begin(flags);
unsigned int access:1;
unsigned int flash_access:1;
- kmemcheck_bitfield_end(flags);
int id;
char name[C2PORT_NAME_LEN];
--- a/include/linux/dma-mapping.h
+++ b/include/linux/dma-mapping.h
@@ -9,7 +9,6 @@
#include <linux/dma-debug.h>
#include <linux/dma-direction.h>
#include <linux/scatterlist.h>
-#include <linux/kmemcheck.h>
#include <linux/bug.h>
#include <linux/mem_encrypt.h>
@@ -230,7 +229,6 @@ static inline dma_addr_t dma_map_single_
const struct dma_map_ops *ops = get_dma_ops(dev);
dma_addr_t addr;
- kmemcheck_mark_initialized(ptr, size);
BUG_ON(!valid_dma_direction(dir));
addr = ops->map_page(dev, virt_to_page(ptr),
offset_in_page(ptr), size,
@@ -263,11 +261,8 @@ static inline int dma_map_sg_attrs(struc
unsigned long attrs)
{
const struct dma_map_ops *ops = get_dma_ops(dev);
- int i, ents;
- struct scatterlist *s;
+ int ents;
- for_each_sg(sg, s, nents, i)
- kmemcheck_mark_initialized(sg_virt(s), s->length);
BUG_ON(!valid_dma_direction(dir));
ents = ops->map_sg(dev, sg, nents, dir, attrs);
BUG_ON(ents < 0);
@@ -297,7 +292,6 @@ static inline dma_addr_t dma_map_page_at
const struct dma_map_ops *ops = get_dma_ops(dev);
dma_addr_t addr;
- kmemcheck_mark_initialized(page_address(page) + offset, size);
BUG_ON(!valid_dma_direction(dir));
addr = ops->map_page(dev, page, offset, size, dir, attrs);
debug_dma_map_page(dev, page, offset, size, dir, addr, false);
--- a/include/linux/filter.h
+++ b/include/linux/filter.h
@@ -454,13 +454,11 @@ struct bpf_binary_header {
struct bpf_prog {
u16 pages; /* Number of allocated pages */
- kmemcheck_bitfield_begin(meta);
u16 jited:1, /* Is our filter JIT'ed? */
locked:1, /* Program image locked? */
gpl_compatible:1, /* Is filter GPL compatible? */
cb_access:1, /* Is control block accessed? */
dst_needed:1; /* Do we need dst entry? */
- kmemcheck_bitfield_end(meta);
enum bpf_prog_type type; /* Type of BPF program */
u32 len; /* Number of filter blocks */
u32 jited_len; /* Size of jited insns in bytes */
--- a/include/linux/mm_types.h
+++ b/include/linux/mm_types.h
@@ -207,14 +207,6 @@ struct page {
not kmapped, ie. highmem) */
#endif /* WANT_PAGE_VIRTUAL */
-#ifdef CONFIG_KMEMCHECK
- /*
- * kmemcheck wants to track the status of each byte in a page; this
- * is a pointer to such a status block. NULL if not tracked.
- */
- void *shadow;
-#endif
-
#ifdef LAST_CPUPID_NOT_IN_PAGE_FLAGS
int _last_cpupid;
#endif
--- a/include/linux/net.h
+++ b/include/linux/net.h
@@ -22,7 +22,6 @@
#include <linux/random.h>
#include <linux/wait.h>
#include <linux/fcntl.h> /* For O_CLOEXEC and O_NONBLOCK */
-#include <linux/kmemcheck.h>
#include <linux/rcupdate.h>
#include <linux/once.h>
#include <linux/fs.h>
@@ -111,9 +110,7 @@ struct socket_wq {
struct socket {
socket_state state;
- kmemcheck_bitfield_begin(type);
short type;
- kmemcheck_bitfield_end(type);
unsigned long flags;
--- a/include/linux/ring_buffer.h
+++ b/include/linux/ring_buffer.h
@@ -2,7 +2,6 @@
#ifndef _LINUX_RING_BUFFER_H
#define _LINUX_RING_BUFFER_H
-#include <linux/kmemcheck.h>
#include <linux/mm.h>
#include <linux/seq_file.h>
#include <linux/poll.h>
@@ -14,9 +13,7 @@ struct ring_buffer_iter;
* Don't refer to this struct directly, use functions below.
*/
struct ring_buffer_event {
- kmemcheck_bitfield_begin(bitfield);
u32 type_len:5, time_delta:27;
- kmemcheck_bitfield_end(bitfield);
u32 array[];
};
--- a/include/linux/skbuff.h
+++ b/include/linux/skbuff.h
@@ -15,7 +15,6 @@
#define _LINUX_SKBUFF_H
#include <linux/kernel.h>
-#include <linux/kmemcheck.h>
#include <linux/compiler.h>
#include <linux/time.h>
#include <linux/bug.h>
@@ -706,7 +705,6 @@ struct sk_buff {
/* Following fields are _not_ copied in __copy_skb_header()
* Note that queue_mapping is here mostly to fill a hole.
*/
- kmemcheck_bitfield_begin(flags1);
__u16 queue_mapping;
/* if you move cloned around you also must adapt those constants */
@@ -725,7 +723,6 @@ struct sk_buff {
head_frag:1,
xmit_more:1,
__unused:1; /* one bit hole */
- kmemcheck_bitfield_end(flags1);
/* fields enclosed in headers_start/headers_end are copied
* using a single memcpy() in __copy_skb_header()
--- a/include/net/inet_sock.h
+++ b/include/net/inet_sock.h
@@ -17,7 +17,6 @@
#define _INET_SOCK_H
#include <linux/bitops.h>
-#include <linux/kmemcheck.h>
#include <linux/string.h>
#include <linux/types.h>
#include <linux/jhash.h>
@@ -84,7 +83,6 @@ struct inet_request_sock {
#define ireq_state req.__req_common.skc_state
#define ireq_family req.__req_common.skc_family
- kmemcheck_bitfield_begin(flags);
u16 snd_wscale : 4,
rcv_wscale : 4,
tstamp_ok : 1,
@@ -93,7 +91,6 @@ struct inet_request_sock {
ecn_ok : 1,
acked : 1,
no_srccheck: 1;
- kmemcheck_bitfield_end(flags);
u32 ir_mark;
union {
struct ip_options_rcu __rcu *ireq_opt;
--- a/include/net/inet_timewait_sock.h
+++ b/include/net/inet_timewait_sock.h
@@ -15,8 +15,6 @@
#ifndef _INET_TIMEWAIT_SOCK_
#define _INET_TIMEWAIT_SOCK_
-
-#include <linux/kmemcheck.h>
#include <linux/list.h>
#include <linux/timer.h>
#include <linux/types.h>
@@ -69,14 +67,12 @@ struct inet_timewait_sock {
/* Socket demultiplex comparisons on incoming packets. */
/* these three are in inet_sock */
__be16 tw_sport;
- kmemcheck_bitfield_begin(flags);
/* And these are ours. */
unsigned int tw_kill : 1,
tw_transparent : 1,
tw_flowlabel : 20,
tw_pad : 2, /* 2 bits hole */
tw_tos : 8;
- kmemcheck_bitfield_end(flags);
struct timer_list tw_timer;
struct inet_bind_bucket *tw_tb;
};
--- a/include/net/sock.h
+++ b/include/net/sock.h
@@ -436,7 +436,6 @@ struct sock {
#define SK_FL_TYPE_MASK 0xffff0000
#endif
- kmemcheck_bitfield_begin(flags);
unsigned int sk_padding : 1,
sk_kern_sock : 1,
sk_no_check_tx : 1,
@@ -445,8 +444,6 @@ struct sock {
sk_protocol : 8,
sk_type : 16;
#define SK_PROTOCOL_MAX U8_MAX
- kmemcheck_bitfield_end(flags);
-
u16 sk_gso_max_segs;
unsigned long sk_lingertime;
struct proto *sk_prot_creator;
--- a/init/main.c
+++ b/init/main.c
@@ -69,7 +69,6 @@
#include <linux/kgdb.h>
#include <linux/ftrace.h>
#include <linux/async.h>
-#include <linux/kmemcheck.h>
#include <linux/sfi.h>
#include <linux/shmem_fs.h>
#include <linux/slab.h>
--- a/kernel/bpf/core.c
+++ b/kernel/bpf/core.c
@@ -85,8 +85,6 @@ struct bpf_prog *bpf_prog_alloc(unsigned
if (fp == NULL)
return NULL;
- kmemcheck_annotate_bitfield(fp, meta);
-
aux = kzalloc(sizeof(*aux), GFP_KERNEL | gfp_extra_flags);
if (aux == NULL) {
vfree(fp);
@@ -127,8 +125,6 @@ struct bpf_prog *bpf_prog_realloc(struct
if (fp == NULL) {
__bpf_prog_uncharge(fp_old->aux->user, delta);
} else {
- kmemcheck_annotate_bitfield(fp, meta);
-
memcpy(fp, fp_old, fp_old->pages * PAGE_SIZE);
fp->pages = pages;
fp->aux->prog = fp;
@@ -662,8 +658,6 @@ static struct bpf_prog *bpf_prog_clone_c
fp = __vmalloc(fp_other->pages * PAGE_SIZE, gfp_flags, PAGE_KERNEL);
if (fp != NULL) {
- kmemcheck_annotate_bitfield(fp, meta);
-
/* aux->prog still points to the fp_other one, so
* when promoting the clone to the real program,
* this still needs to be adapted.
--- a/kernel/locking/lockdep.c
+++ b/kernel/locking/lockdep.c
@@ -47,7 +47,6 @@
#include <linux/stringify.h>
#include <linux/bitops.h>
#include <linux/gfp.h>
-#include <linux/kmemcheck.h>
#include <linux/random.h>
#include <linux/jhash.h>
@@ -3225,8 +3224,6 @@ static void __lockdep_init_map(struct lo
{
int i;
- kmemcheck_mark_initialized(lock, sizeof(*lock));
-
for (i = 0; i < NR_LOCKDEP_CACHING_CLASSES; i++)
lock->class_cache[i] = NULL;
--- a/kernel/trace/ring_buffer.c
+++ b/kernel/trace/ring_buffer.c
@@ -13,7 +13,6 @@
#include <linux/uaccess.h>
#include <linux/hardirq.h>
#include <linux/kthread.h> /* for self test */
-#include <linux/kmemcheck.h>
#include <linux/module.h>
#include <linux/percpu.h>
#include <linux/mutex.h>
@@ -2059,7 +2058,6 @@ rb_reset_tail(struct ring_buffer_per_cpu
}
event = __rb_page_index(tail_page, tail);
- kmemcheck_annotate_bitfield(event, bitfield);
/* account for padding bytes */
local_add(BUF_PAGE_SIZE - tail, &cpu_buffer->entries_bytes);
@@ -2690,7 +2688,6 @@ __rb_reserve_next(struct ring_buffer_per
/* We reserved something on the buffer */
event = __rb_page_index(tail_page, tail);
- kmemcheck_annotate_bitfield(event, bitfield);
rb_update_event(cpu_buffer, event, info);
local_inc(&tail_page->entries);
--- a/mm/kmemleak.c
+++ b/mm/kmemleak.c
@@ -110,7 +110,6 @@
#include <linux/atomic.h>
#include <linux/kasan.h>
-#include <linux/kmemcheck.h>
#include <linux/kmemleak.h>
#include <linux/memory_hotplug.h>
@@ -1238,9 +1237,6 @@ static bool update_checksum(struct kmeml
{
u32 old_csum = object->checksum;
- if (!kmemcheck_is_obj_initialized(object->pointer, object->size))
- return false;
-
kasan_disable_current();
object->checksum = crc32(0, (void *)object->pointer, object->size);
kasan_enable_current();
@@ -1314,11 +1310,6 @@ static void scan_block(void *_start, voi
if (scan_should_stop())
break;
- /* don't scan uninitialized memory */
- if (!kmemcheck_is_obj_initialized((unsigned long)ptr,
- BYTES_PER_POINTER))
- continue;
-
kasan_disable_current();
pointer = *ptr;
kasan_enable_current();
--- a/mm/page_alloc.c
+++ b/mm/page_alloc.c
@@ -24,7 +24,6 @@
#include <linux/memblock.h>
#include <linux/compiler.h>
#include <linux/kernel.h>
-#include <linux/kmemcheck.h>
#include <linux/kasan.h>
#include <linux/module.h>
#include <linux/suspend.h>
@@ -1022,7 +1021,6 @@ static __always_inline bool free_pages_p
VM_BUG_ON_PAGE(PageTail(page), page);
trace_mm_page_free(page, order);
- kmemcheck_free_shadow(page, order);
/*
* Check tail pages before head page information is cleared to
@@ -2674,15 +2672,6 @@ void split_page(struct page *page, unsig
VM_BUG_ON_PAGE(PageCompound(page), page);
VM_BUG_ON_PAGE(!page_count(page), page);
-#ifdef CONFIG_KMEMCHECK
- /*
- * Split shadow pages too, because free(page[0]) would
- * otherwise free the whole shadow.
- */
- if (kmemcheck_page_is_tracked(page))
- split_page(virt_to_page(page[0].shadow), order);
-#endif
-
for (i = 1; i < (1 << order); i++)
set_page_refcounted(page + i);
split_page_owner(page, order);
@@ -4228,9 +4217,6 @@ out:
page = NULL;
}
- if (kmemcheck_enabled && page)
- kmemcheck_pagealloc_alloc(page, order, gfp_mask);
-
trace_mm_page_alloc(page, order, alloc_mask, ac.migratetype);
return page;
--- a/mm/slab.c
+++ b/mm/slab.c
@@ -114,7 +114,6 @@
#include <linux/rtmutex.h>
#include <linux/reciprocal_div.h>
#include <linux/debugobjects.h>
-#include <linux/kmemcheck.h>
#include <linux/memory.h>
#include <linux/prefetch.h>
#include <linux/sched/task_stack.h>
@@ -1435,15 +1434,6 @@ static struct page *kmem_getpages(struct
if (sk_memalloc_socks() && page_is_pfmemalloc(page))
SetPageSlabPfmemalloc(page);
- if (kmemcheck_enabled && !(cachep->flags & SLAB_NOTRACK)) {
- kmemcheck_alloc_shadow(page, cachep->gfporder, flags, nodeid);
-
- if (cachep->ctor)
- kmemcheck_mark_uninitialized_pages(page, nr_pages);
- else
- kmemcheck_mark_unallocated_pages(page, nr_pages);
- }
-
return page;
}
@@ -1455,8 +1445,6 @@ static void kmem_freepages(struct kmem_c
int order = cachep->gfporder;
unsigned long nr_freed = (1 << order);
- kmemcheck_free_shadow(page, order);
-
if (cachep->flags & SLAB_RECLAIM_ACCOUNT)
mod_lruvec_page_state(page, NR_SLAB_RECLAIMABLE, -nr_freed);
else
@@ -3516,8 +3504,6 @@ void ___cache_free(struct kmem_cache *ca
kmemleak_free_recursive(objp, cachep->flags);
objp = cache_free_debugcheck(cachep, objp, caller);
- kmemcheck_slab_free(cachep, objp, cachep->object_size);
-
/*
* Skip calling cache_free_alien() when the platform is not numa.
* This will avoid cache misses that happen while accessing slabp (which
--- a/mm/slab.h
+++ b/mm/slab.h
@@ -40,7 +40,6 @@ struct kmem_cache {
#include <linux/memcontrol.h>
#include <linux/fault-inject.h>
-#include <linux/kmemcheck.h>
#include <linux/kasan.h>
#include <linux/kmemleak.h>
#include <linux/random.h>
@@ -439,7 +438,6 @@ static inline void slab_post_alloc_hook(
for (i = 0; i < size; i++) {
void *object = p[i];
- kmemcheck_slab_alloc(s, flags, object, slab_ksize(s));
kmemleak_alloc_recursive(object, s->object_size, 1,
s->flags, flags);
kasan_slab_alloc(s, object, flags);
--- a/mm/slub.c
+++ b/mm/slub.c
@@ -22,7 +22,6 @@
#include <linux/notifier.h>
#include <linux/seq_file.h>
#include <linux/kasan.h>
-#include <linux/kmemcheck.h>
#include <linux/cpu.h>
#include <linux/cpuset.h>
#include <linux/mempolicy.h>
@@ -1375,7 +1374,6 @@ static inline void *slab_free_hook(struc
unsigned long flags;
local_irq_save(flags);
- kmemcheck_slab_free(s, x, s->object_size);
debug_check_no_locks_freed(x, s->object_size);
local_irq_restore(flags);
}
@@ -1596,22 +1594,6 @@ static struct page *allocate_slab(struct
stat(s, ORDER_FALLBACK);
}
- if (kmemcheck_enabled &&
- !(s->flags & (SLAB_NOTRACK | DEBUG_DEFAULT_FLAGS))) {
- int pages = 1 << oo_order(oo);
-
- kmemcheck_alloc_shadow(page, oo_order(oo), alloc_gfp, node);
-
- /*
- * Objects from caches that have a constructor don't get
- * cleared when they're allocated, so we need to do it here.
- */
- if (s->ctor)
- kmemcheck_mark_uninitialized_pages(page, pages);
- else
- kmemcheck_mark_unallocated_pages(page, pages);
- }
-
page->objects = oo_objects(oo);
order = compound_order(page);
@@ -1687,8 +1669,6 @@ static void __free_slab(struct kmem_cach
check_object(s, page, p, SLUB_RED_INACTIVE);
}
- kmemcheck_free_shadow(page, compound_order(page));
-
mod_lruvec_page_state(page,
(s->flags & SLAB_RECLAIM_ACCOUNT) ?
NR_SLAB_RECLAIMABLE : NR_SLAB_UNRECLAIMABLE,
--- a/net/core/skbuff.c
+++ b/net/core/skbuff.c
@@ -41,7 +41,6 @@
#include <linux/module.h>
#include <linux/types.h>
#include <linux/kernel.h>
-#include <linux/kmemcheck.h>
#include <linux/mm.h>
#include <linux/interrupt.h>
#include <linux/in.h>
@@ -234,14 +233,12 @@ struct sk_buff *__alloc_skb(unsigned int
shinfo = skb_shinfo(skb);
memset(shinfo, 0, offsetof(struct skb_shared_info, dataref));
atomic_set(&shinfo->dataref, 1);
- kmemcheck_annotate_variable(shinfo->destructor_arg);
if (flags & SKB_ALLOC_FCLONE) {
struct sk_buff_fclones *fclones;
fclones = container_of(skb, struct sk_buff_fclones, skb1);
- kmemcheck_annotate_bitfield(&fclones->skb2, flags1);
skb->fclone = SKB_FCLONE_ORIG;
refcount_set(&fclones->fclone_ref, 1);
@@ -301,7 +298,6 @@ struct sk_buff *__build_skb(void *data,
shinfo = skb_shinfo(skb);
memset(shinfo, 0, offsetof(struct skb_shared_info, dataref));
atomic_set(&shinfo->dataref, 1);
- kmemcheck_annotate_variable(shinfo->destructor_arg);
return skb;
}
@@ -1284,7 +1280,6 @@ struct sk_buff *skb_clone(struct sk_buff
if (!n)
return NULL;
- kmemcheck_annotate_bitfield(n, flags1);
n->fclone = SKB_FCLONE_UNAVAILABLE;
}
--- a/net/core/sock.c
+++ b/net/core/sock.c
@@ -1469,8 +1469,6 @@ static struct sock *sk_prot_alloc(struct
sk = kmalloc(prot->obj_size, priority);
if (sk != NULL) {
- kmemcheck_annotate_bitfield(sk, flags);
-
if (security_sk_alloc(sk, family, priority))
goto out_free;
--- a/net/ipv4/inet_timewait_sock.c
+++ b/net/ipv4/inet_timewait_sock.c
@@ -9,7 +9,6 @@
*/
#include <linux/kernel.h>
-#include <linux/kmemcheck.h>
#include <linux/slab.h>
#include <linux/module.h>
#include <net/inet_hashtables.h>
@@ -167,8 +166,6 @@ struct inet_timewait_sock *inet_twsk_all
if (tw) {
const struct inet_sock *inet = inet_sk(sk);
- kmemcheck_annotate_bitfield(tw, flags);
-
tw->tw_dr = dr;
/* Give us an identity. */
tw->tw_daddr = inet->inet_daddr;
--- a/net/ipv4/tcp_input.c
+++ b/net/ipv4/tcp_input.c
@@ -6204,7 +6204,6 @@ struct request_sock *inet_reqsk_alloc(co
if (req) {
struct inet_request_sock *ireq = inet_rsk(req);
- kmemcheck_annotate_bitfield(ireq, flags);
ireq->ireq_opt = NULL;
#if IS_ENABLED(CONFIG_IPV6)
ireq->pktopts = NULL;
--- a/net/socket.c
+++ b/net/socket.c
@@ -568,7 +568,6 @@ struct socket *sock_alloc(void)
sock = SOCKET_I(inode);
- kmemcheck_annotate_bitfield(sock, type);
inode->i_ino = get_next_ino();
inode->i_mode = S_IFSOCK | S_IRWXUGO;
inode->i_uid = current_fsuid();
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Dan Williams <[email protected]>
commit 8e1eb3fa009aa7c0b944b3c8b26b07de0efb3200 upstream.
At entry userspace may have (maliciously) populated the extra registers
outside the syscall calling convention with arbitrary values that could
be useful in a speculative execution (Spectre style) attack.
Clear these registers to minimize the kernel's attack surface.
Note, this only clears the extra registers and not the unused
registers for syscalls less than 6 arguments, since those registers are
likely to be clobbered well before their values could be put to use
under speculation.
Note, Linus found that the XOR instructions can be executed with
minimized cost if interleaved with the PUSH instructions, and Ingo's
analysis found that R10 and R11 should be included in the register
clearing beyond the typical 'extra' syscall calling convention
registers.
Suggested-by: Linus Torvalds <[email protected]>
Reported-by: Andi Kleen <[email protected]>
Signed-off-by: Dan Williams <[email protected]>
Cc: <[email protected]>
Cc: Andy Lutomirski <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: Brian Gerst <[email protected]>
Cc: Denys Vlasenko <[email protected]>
Cc: H. Peter Anvin <[email protected]>
Cc: Josh Poimboeuf <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Link: http://lkml.kernel.org/r/151787988577.7847.16733592218894189003.stgit@dwillia2-desk3.amr.corp.intel.com
[ Made small improvements to the changelog and the code comments. ]
Signed-off-by: Ingo Molnar <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/entry/entry_64.S | 13 +++++++++++++
1 file changed, 13 insertions(+)
--- a/arch/x86/entry/entry_64.S
+++ b/arch/x86/entry/entry_64.S
@@ -231,13 +231,26 @@ GLOBAL(entry_SYSCALL_64_after_hwframe)
pushq %r8 /* pt_regs->r8 */
pushq %r9 /* pt_regs->r9 */
pushq %r10 /* pt_regs->r10 */
+ /*
+ * Clear extra registers that a speculation attack might
+ * otherwise want to exploit. Interleave XOR with PUSH
+ * for better uop scheduling:
+ */
+ xorq %r10, %r10 /* nospec r10 */
pushq %r11 /* pt_regs->r11 */
+ xorq %r11, %r11 /* nospec r11 */
pushq %rbx /* pt_regs->rbx */
+ xorl %ebx, %ebx /* nospec rbx */
pushq %rbp /* pt_regs->rbp */
+ xorl %ebp, %ebp /* nospec rbp */
pushq %r12 /* pt_regs->r12 */
+ xorq %r12, %r12 /* nospec r12 */
pushq %r13 /* pt_regs->r13 */
+ xorq %r13, %r13 /* nospec r13 */
pushq %r14 /* pt_regs->r14 */
+ xorq %r14, %r14 /* nospec r14 */
pushq %r15 /* pt_regs->r15 */
+ xorq %r15, %r15 /* nospec r15 */
UNWIND_HINT_REGS
TRACE_IRQS_OFF
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Juergen Gross <[email protected]>
commit 4f277295e54c5b7340e48efea3fc5cc21a2872b7 upstream.
When running as Xen pv guest %gs is initialized some time after
C code is started. Depending on stack protector usage this might be
too late, resulting in page faults.
So setup %gs and MSR_GS_BASE in assembly code already.
Cc: [email protected]
Signed-off-by: Juergen Gross <[email protected]>
Reviewed-by: Boris Ostrovsky <[email protected]>
Tested-by: Chris Patterson <[email protected]>
Signed-off-by: Juergen Gross <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/xen/xen-head.S | 16 ++++++++++++++++
1 file changed, 16 insertions(+)
--- a/arch/x86/xen/xen-head.S
+++ b/arch/x86/xen/xen-head.S
@@ -9,7 +9,9 @@
#include <asm/boot.h>
#include <asm/asm.h>
+#include <asm/msr.h>
#include <asm/page_types.h>
+#include <asm/percpu.h>
#include <asm/unwind_hints.h>
#include <xen/interface/elfnote.h>
@@ -35,6 +37,20 @@ ENTRY(startup_xen)
mov %_ASM_SI, xen_start_info
mov $init_thread_union+THREAD_SIZE, %_ASM_SP
+#ifdef CONFIG_X86_64
+ /* Set up %gs.
+ *
+ * The base of %gs always points to the bottom of the irqstack
+ * union. If the stack protector canary is enabled, it is
+ * located at %gs:40. Note that, on SMP, the boot cpu uses
+ * init data section till per cpu areas are set up.
+ */
+ movl $MSR_GS_BASE,%ecx
+ movq $INIT_PER_CPU_VAR(irq_stack_union),%rax
+ cdq
+ wrmsr
+#endif
+
jmp xen_start_kernel
END(startup_xen)
__FINIT
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Josh Poimboeuf <[email protected]>
commit b3ccefaed922529e6a67de7b30af5aa38c76ace9 upstream.
With the following commit:
f09d160992d1 ("x86/entry/64: Get rid of the ALLOC_PT_GPREGS_ON_STACK and SAVE_AND_CLEAR_REGS macros")
... one of my suggested improvements triggered a frame pointer warning:
arch/x86/entry/entry_64.o: warning: objtool: paranoid_entry()+0x11: call without frame pointer save/setup
The warning is correct for the build-time code, but it's actually not
relevant at runtime because of paravirt patching. The paravirt swapgs
call gets replaced with either a SWAPGS instruction or NOPs at runtime.
Go back to the previous behavior by removing the ELF function annotation
for paranoid_entry() and adding an unwind hint, which effectively
silences the warning.
Reported-by: kbuild test robot <[email protected]>
Signed-off-by: Josh Poimboeuf <[email protected]>
Cc: Dominik Brodowski <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: [email protected]
Cc: [email protected]
Fixes: f09d160992d1 ("x86/entry/64: Get rid of the ALLOC_PT_GPREGS_ON_STACK and SAVE_AND_CLEAR_REGS macros")
Link: http://lkml.kernel.org/r/20180212174503.5acbymg5z6p32snu@treble
Signed-off-by: Ingo Molnar <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/entry/entry_64.S | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/arch/x86/entry/entry_64.S
+++ b/arch/x86/entry/entry_64.S
@@ -1122,6 +1122,7 @@ idtentry machine_check do_mce has_err
* Return: ebx=0: need swapgs on exit, ebx=1: otherwise
*/
ENTRY(paranoid_entry)
+ UNWIND_HINT_FUNC
cld
movl $1, %ebx
movl $MSR_GS_BASE, %ecx
@@ -1135,7 +1136,7 @@ ENTRY(paranoid_entry)
SAVE_AND_SWITCH_TO_KERNEL_CR3 scratch_reg=%rax save_reg=%r14
ret
-ENDPROC(paranoid_entry)
+END(paranoid_entry)
/*
* "Paranoid" exit path from exception stack. This is invoked
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Dominik Brodowski <[email protected]>
commit 92816f571af81e9a71cc6f3dc8ce1e2fcdf7b6b8 upstream.
... same as the other macros in arch/x86/entry/calling.h
Signed-off-by: Dominik Brodowski <[email protected]>
Cc: Andy Lutomirski <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: Brian Gerst <[email protected]>
Cc: Denys Vlasenko <[email protected]>
Cc: H. Peter Anvin <[email protected]>
Cc: Josh Poimboeuf <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: [email protected]
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Ingo Molnar <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/entry/calling.h | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
--- a/arch/x86/entry/calling.h
+++ b/arch/x86/entry/calling.h
@@ -97,7 +97,7 @@ For 32-bit we have the following convent
#define SIZEOF_PTREGS 21*8
- .macro PUSH_AND_CLEAR_REGS rdx=%rdx rax=%rax
+.macro PUSH_AND_CLEAR_REGS rdx=%rdx rax=%rax
/*
* Push registers and sanitize registers of values that a
* speculation attack might otherwise want to exploit. The
@@ -131,9 +131,9 @@ For 32-bit we have the following convent
pushq %r15 /* pt_regs->r15 */
xorq %r15, %r15 /* nospec r15*/
UNWIND_HINT_REGS
- .endm
+.endm
- .macro POP_REGS pop_rdi=1 skip_r11rcx=0
+.macro POP_REGS pop_rdi=1 skip_r11rcx=0
popq %r15
popq %r14
popq %r13
@@ -163,7 +163,7 @@ For 32-bit we have the following convent
.macro icebp
.byte 0xf1
- .endm
+.endm
/*
* This is a sneaky trick to help the unwinder find pt_regs on the stack. The
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Dominik Brodowski <[email protected]>
commit 3f01daecd545e818098d84fd1ad43e19a508d705 upstream.
Those instances where ALLOC_PT_GPREGS_ON_STACK is called just before
SAVE_AND_CLEAR_REGS can trivially be replaced by PUSH_AND_CLEAN_REGS.
This macro uses PUSH instead of MOV and should therefore be faster, at
least on newer CPUs.
Suggested-by: Linus Torvalds <[email protected]>
Signed-off-by: Dominik Brodowski <[email protected]>
Cc: Andy Lutomirski <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: Brian Gerst <[email protected]>
Cc: Denys Vlasenko <[email protected]>
Cc: H. Peter Anvin <[email protected]>
Cc: Josh Poimboeuf <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: [email protected]
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Ingo Molnar <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/entry/calling.h | 36 ++++++++++++++++++++++++++++++++++++
arch/x86/entry/entry_64.S | 6 ++----
2 files changed, 38 insertions(+), 4 deletions(-)
--- a/arch/x86/entry/calling.h
+++ b/arch/x86/entry/calling.h
@@ -137,6 +137,42 @@ For 32-bit we have the following convent
UNWIND_HINT_REGS offset=\offset
.endm
+ .macro PUSH_AND_CLEAR_REGS
+ /*
+ * Push registers and sanitize registers of values that a
+ * speculation attack might otherwise want to exploit. The
+ * lower registers are likely clobbered well before they
+ * could be put to use in a speculative execution gadget.
+ * Interleave XOR with PUSH for better uop scheduling:
+ */
+ pushq %rdi /* pt_regs->di */
+ pushq %rsi /* pt_regs->si */
+ pushq %rdx /* pt_regs->dx */
+ pushq %rcx /* pt_regs->cx */
+ pushq %rax /* pt_regs->ax */
+ pushq %r8 /* pt_regs->r8 */
+ xorq %r8, %r8 /* nospec r8 */
+ pushq %r9 /* pt_regs->r9 */
+ xorq %r9, %r9 /* nospec r9 */
+ pushq %r10 /* pt_regs->r10 */
+ xorq %r10, %r10 /* nospec r10 */
+ pushq %r11 /* pt_regs->r11 */
+ xorq %r11, %r11 /* nospec r11*/
+ pushq %rbx /* pt_regs->rbx */
+ xorl %ebx, %ebx /* nospec rbx*/
+ pushq %rbp /* pt_regs->rbp */
+ xorl %ebp, %ebp /* nospec rbp*/
+ pushq %r12 /* pt_regs->r12 */
+ xorq %r12, %r12 /* nospec r12*/
+ pushq %r13 /* pt_regs->r13 */
+ xorq %r13, %r13 /* nospec r13*/
+ pushq %r14 /* pt_regs->r14 */
+ xorq %r14, %r14 /* nospec r14*/
+ pushq %r15 /* pt_regs->r15 */
+ xorq %r15, %r15 /* nospec r15*/
+ UNWIND_HINT_REGS
+ .endm
+
.macro POP_REGS pop_rdi=1 skip_r11rcx=0
popq %r15
popq %r14
--- a/arch/x86/entry/entry_64.S
+++ b/arch/x86/entry/entry_64.S
@@ -560,8 +560,7 @@ END(irq_entries_start)
call switch_to_thread_stack
1:
- ALLOC_PT_GPREGS_ON_STACK
- SAVE_AND_CLEAR_REGS
+ PUSH_AND_CLEAR_REGS
ENCODE_FRAME_POINTER
testb $3, CS(%rsp)
@@ -1106,8 +1105,7 @@ ENTRY(xen_failsafe_callback)
addq $0x30, %rsp
UNWIND_HINT_IRET_REGS
pushq $-1 /* orig_ax = -1 => not a system call */
- ALLOC_PT_GPREGS_ON_STACK
- SAVE_AND_CLEAR_REGS
+ PUSH_AND_CLEAR_REGS
ENCODE_FRAME_POINTER
jmp error_exit
END(xen_failsafe_callback)
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Rafael J. Wysocki <[email protected]>
commit d7212cfb05ba802bea4dd6c90d61cfe6366ea224 upstream.
Commit f85942207516 (x86: PM: Make APM idle driver initialize polling
state) made apm_init() call cpuidle_poll_state_init(), but that only
is defined for CONFIG_CPU_IDLE set, so make the empty stub of it
available for CONFIG_CPU_IDLE unset too to fix the resulting build
issue.
Fixes: f85942207516 (x86: PM: Make APM idle driver initialize polling state)
Signed-off-by: Rafael J. Wysocki <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
include/linux/cpuidle.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/include/linux/cpuidle.h
+++ b/include/linux/cpuidle.h
@@ -225,7 +225,7 @@ static inline void cpuidle_coupled_paral
}
#endif
-#ifdef CONFIG_ARCH_HAS_CPU_RELAX
+#if defined(CONFIG_CPU_IDLE) && defined(CONFIG_ARCH_HAS_CPU_RELAX)
void cpuidle_poll_state_init(struct cpuidle_driver *drv);
#else
static inline void cpuidle_poll_state_init(struct cpuidle_driver *drv) {}
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Dominik Brodowski <[email protected]>
commit 502af0d70843c2a9405d7ba1f79b4b0305aaf5f5 upstream.
The two special, opencoded cases for POP_C_REGS can be handled by ASM
macros.
Signed-off-by: Dominik Brodowski <[email protected]>
Cc: Andy Lutomirski <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: Brian Gerst <[email protected]>
Cc: Denys Vlasenko <[email protected]>
Cc: H. Peter Anvin <[email protected]>
Cc: Josh Poimboeuf <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: [email protected]
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Ingo Molnar <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/entry/calling.h | 15 +++++++++++----
arch/x86/entry/entry_64.S | 26 ++++----------------------
2 files changed, 15 insertions(+), 26 deletions(-)
--- a/arch/x86/entry/calling.h
+++ b/arch/x86/entry/calling.h
@@ -139,25 +139,32 @@ For 32-bit we have the following convent
xorq %r15, %r15
.endm
- .macro POP_EXTRA_REGS
+ .macro POP_REGS pop_rdi=1 skip_r11rcx=0
popq %r15
popq %r14
popq %r13
popq %r12
popq %rbp
popq %rbx
- .endm
-
- .macro POP_C_REGS
+ .if \skip_r11rcx
+ popq %rsi
+ .else
popq %r11
+ .endif
popq %r10
popq %r9
popq %r8
popq %rax
+ .if \skip_r11rcx
+ popq %rsi
+ .else
popq %rcx
+ .endif
popq %rdx
popq %rsi
+ .if \pop_rdi
popq %rdi
+ .endif
.endm
.macro icebp
--- a/arch/x86/entry/entry_64.S
+++ b/arch/x86/entry/entry_64.S
@@ -330,15 +330,7 @@ GLOBAL(entry_SYSCALL_64_after_hwframe)
syscall_return_via_sysret:
/* rcx and r11 are already restored (see code above) */
UNWIND_HINT_EMPTY
- POP_EXTRA_REGS
- popq %rsi /* skip r11 */
- popq %r10
- popq %r9
- popq %r8
- popq %rax
- popq %rsi /* skip rcx */
- popq %rdx
- popq %rsi
+ POP_REGS pop_rdi=0 skip_r11rcx=1
/*
* Now all regs are restored except RSP and RDI.
@@ -631,15 +623,7 @@ GLOBAL(swapgs_restore_regs_and_return_to
ud2
1:
#endif
- POP_EXTRA_REGS
- popq %r11
- popq %r10
- popq %r9
- popq %r8
- popq %rax
- popq %rcx
- popq %rdx
- popq %rsi
+ POP_REGS pop_rdi=0
/*
* The stack is now user RDI, orig_ax, RIP, CS, EFLAGS, RSP, SS.
@@ -697,8 +681,7 @@ GLOBAL(restore_regs_and_return_to_kernel
ud2
1:
#endif
- POP_EXTRA_REGS
- POP_C_REGS
+ POP_REGS
addq $8, %rsp /* skip regs->orig_ax */
INTERRUPT_RETURN
@@ -1655,8 +1638,7 @@ end_repeat_nmi:
nmi_swapgs:
SWAPGS_UNSAFE_STACK
nmi_restore:
- POP_EXTRA_REGS
- POP_C_REGS
+ POP_REGS
/*
* Skip orig_ax and the "outermost" frame to point RSP at the "iret"
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: David Woodhouse <[email protected]>
commit f208820a321f9b23d77d7eed89945d862d62a3ed upstream.
This reverts commit 64e16720ea0879f8ab4547e3b9758936d483909b.
We cannot call C functions like that, without marking all the
call-clobbered registers as, well, clobbered. We might have got away
with it for now because the __ibp_barrier() function was *fairly*
unlikely to actually use any other registers. But no. Just no.
Signed-off-by: David Woodhouse <[email protected]>
Cc: Andy Lutomirski <[email protected]>
Cc: Arjan van de Ven <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: Dan Williams <[email protected]>
Cc: Dave Hansen <[email protected]>
Cc: David Woodhouse <[email protected]>
Cc: Greg Kroah-Hartman <[email protected]>
Cc: Josh Poimboeuf <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Ingo Molnar <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/include/asm/nospec-branch.h | 13 +++++++++----
arch/x86/include/asm/processor.h | 3 ---
arch/x86/kernel/cpu/bugs.c | 6 ------
3 files changed, 9 insertions(+), 13 deletions(-)
--- a/arch/x86/include/asm/nospec-branch.h
+++ b/arch/x86/include/asm/nospec-branch.h
@@ -164,10 +164,15 @@ static inline void vmexit_fill_RSB(void)
static inline void indirect_branch_prediction_barrier(void)
{
- alternative_input("",
- "call __ibp_barrier",
- X86_FEATURE_USE_IBPB,
- ASM_NO_INPUT_CLOBBER("eax", "ecx", "edx", "memory"));
+ asm volatile(ALTERNATIVE("",
+ "movl %[msr], %%ecx\n\t"
+ "movl %[val], %%eax\n\t"
+ "movl $0, %%edx\n\t"
+ "wrmsr",
+ X86_FEATURE_USE_IBPB)
+ : : [msr] "i" (MSR_IA32_PRED_CMD),
+ [val] "i" (PRED_CMD_IBPB)
+ : "eax", "ecx", "edx", "memory");
}
#endif /* __ASSEMBLY__ */
--- a/arch/x86/include/asm/processor.h
+++ b/arch/x86/include/asm/processor.h
@@ -968,7 +968,4 @@ bool xen_set_default_idle(void);
void stop_this_cpu(void *dummy);
void df_debug(struct pt_regs *regs, long error_code);
-
-void __ibp_barrier(void);
-
#endif /* _ASM_X86_PROCESSOR_H */
--- a/arch/x86/kernel/cpu/bugs.c
+++ b/arch/x86/kernel/cpu/bugs.c
@@ -337,9 +337,3 @@ ssize_t cpu_show_spectre_v2(struct devic
spectre_v2_module_string());
}
#endif
-
-void __ibp_barrier(void)
-{
- __wrmsr(MSR_IA32_PRED_CMD, PRED_CMD_IBPB, 0);
-}
-EXPORT_SYMBOL_GPL(__ibp_barrier);
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Balbir Singh <[email protected]>
commit 4dd5f8a99e791a8c6500e3592f3ce81ae7edcde1 upstream.
This patch splits the linear mapping if the hot-unplug range is
smaller than the mapping size. The code detects if the mapping needs
to be split into a smaller size and if so, uses the stop machine
infrastructure to clear the existing mapping and then remap the
remaining range using a smaller page size.
The code will skip any region of the mapping that overlaps with kernel
text and warn about it once. We don't want to remove a mapping where
the kernel text and the LMB we intend to remove overlap in the same
TLB mapping as it may affect the currently executing code.
I've tested these changes under a kvm guest with 2 vcpus, from a split
mapping point of view, some of the caveats mentioned above applied to
the testing I did.
Fixes: 4b5d62ca17a1 ("powerpc/mm: add radix__remove_section_mapping()")
Signed-off-by: Balbir Singh <[email protected]>
[mpe: Tweak change log to match updated behaviour]
Signed-off-by: Michael Ellerman <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/powerpc/mm/pgtable-radix.c | 95 +++++++++++++++++++++++++++++++---------
1 file changed, 74 insertions(+), 21 deletions(-)
--- a/arch/powerpc/mm/pgtable-radix.c
+++ b/arch/powerpc/mm/pgtable-radix.c
@@ -17,6 +17,7 @@
#include <linux/of_fdt.h>
#include <linux/mm.h>
#include <linux/string_helpers.h>
+#include <linux/stop_machine.h>
#include <asm/pgtable.h>
#include <asm/pgalloc.h>
@@ -671,6 +672,30 @@ static void free_pmd_table(pmd_t *pmd_st
pud_clear(pud);
}
+struct change_mapping_params {
+ pte_t *pte;
+ unsigned long start;
+ unsigned long end;
+ unsigned long aligned_start;
+ unsigned long aligned_end;
+};
+
+static int stop_machine_change_mapping(void *data)
+{
+ struct change_mapping_params *params =
+ (struct change_mapping_params *)data;
+
+ if (!data)
+ return -1;
+
+ spin_unlock(&init_mm.page_table_lock);
+ pte_clear(&init_mm, params->aligned_start, params->pte);
+ create_physical_mapping(params->aligned_start, params->start);
+ create_physical_mapping(params->end, params->aligned_end);
+ spin_lock(&init_mm.page_table_lock);
+ return 0;
+}
+
static void remove_pte_table(pte_t *pte_start, unsigned long addr,
unsigned long end)
{
@@ -699,6 +724,52 @@ static void remove_pte_table(pte_t *pte_
}
}
+/*
+ * clear the pte and potentially split the mapping helper
+ */
+static void split_kernel_mapping(unsigned long addr, unsigned long end,
+ unsigned long size, pte_t *pte)
+{
+ unsigned long mask = ~(size - 1);
+ unsigned long aligned_start = addr & mask;
+ unsigned long aligned_end = addr + size;
+ struct change_mapping_params params;
+ bool split_region = false;
+
+ if ((end - addr) < size) {
+ /*
+ * We're going to clear the PTE, but not flushed
+ * the mapping, time to remap and flush. The
+ * effects if visible outside the processor or
+ * if we are running in code close to the
+ * mapping we cleared, we are in trouble.
+ */
+ if (overlaps_kernel_text(aligned_start, addr) ||
+ overlaps_kernel_text(end, aligned_end)) {
+ /*
+ * Hack, just return, don't pte_clear
+ */
+ WARN_ONCE(1, "Linear mapping %lx->%lx overlaps kernel "
+ "text, not splitting\n", addr, end);
+ return;
+ }
+ split_region = true;
+ }
+
+ if (split_region) {
+ params.pte = pte;
+ params.start = addr;
+ params.end = end;
+ params.aligned_start = addr & ~(size - 1);
+ params.aligned_end = min_t(unsigned long, aligned_end,
+ (unsigned long)__va(memblock_end_of_DRAM()));
+ stop_machine(stop_machine_change_mapping, ¶ms, NULL);
+ return;
+ }
+
+ pte_clear(&init_mm, addr, pte);
+}
+
static void remove_pmd_table(pmd_t *pmd_start, unsigned long addr,
unsigned long end)
{
@@ -714,13 +785,7 @@ static void remove_pmd_table(pmd_t *pmd_
continue;
if (pmd_huge(*pmd)) {
- if (!IS_ALIGNED(addr, PMD_SIZE) ||
- !IS_ALIGNED(next, PMD_SIZE)) {
- WARN_ONCE(1, "%s: unaligned range\n", __func__);
- continue;
- }
-
- pte_clear(&init_mm, addr, (pte_t *)pmd);
+ split_kernel_mapping(addr, end, PMD_SIZE, (pte_t *)pmd);
continue;
}
@@ -745,13 +810,7 @@ static void remove_pud_table(pud_t *pud_
continue;
if (pud_huge(*pud)) {
- if (!IS_ALIGNED(addr, PUD_SIZE) ||
- !IS_ALIGNED(next, PUD_SIZE)) {
- WARN_ONCE(1, "%s: unaligned range\n", __func__);
- continue;
- }
-
- pte_clear(&init_mm, addr, (pte_t *)pud);
+ split_kernel_mapping(addr, end, PUD_SIZE, (pte_t *)pud);
continue;
}
@@ -777,13 +836,7 @@ static void remove_pagetable(unsigned lo
continue;
if (pgd_huge(*pgd)) {
- if (!IS_ALIGNED(addr, PGDIR_SIZE) ||
- !IS_ALIGNED(next, PGDIR_SIZE)) {
- WARN_ONCE(1, "%s: unaligned range\n", __func__);
- continue;
- }
-
- pte_clear(&init_mm, addr, (pte_t *)pgd);
+ split_kernel_mapping(addr, end, PGDIR_SIZE, (pte_t *)pgd);
continue;
}
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Bodong Wang <[email protected]>
commit cd2a6e7d384b043d5d029e39663061cebc949385 upstream.
The change of slid from u16 to u32 results in sizeof(struct ib_wc)
cross 64B boundary, which causes more cache misses. This patch
rearranges the fields and remain the size to 64B.
Pahole output before this change:
struct ib_wc {
union {
u64 wr_id; /* 8 */
struct ib_cqe * wr_cqe; /* 8 */
}; /* 0 8 */
enum ib_wc_status status; /* 8 4 */
enum ib_wc_opcode opcode; /* 12 4 */
u32 vendor_err; /* 16 4 */
u32 byte_len; /* 20 4 */
struct ib_qp * qp; /* 24 8 */
union {
__be32 imm_data; /* 4 */
u32 invalidate_rkey; /* 4 */
} ex; /* 32 4 */
u32 src_qp; /* 36 4 */
int wc_flags; /* 40 4 */
u16 pkey_index; /* 44 2 */
/* XXX 2 bytes hole, try to pack */
u32 slid; /* 48 4 */
u8 sl; /* 52 1 */
u8 dlid_path_bits; /* 53 1 */
u8 port_num; /* 54 1 */
u8 smac[6]; /* 55 6 */
/* XXX 1 byte hole, try to pack */
u16 vlan_id; /* 62 2 */
/* --- cacheline 1 boundary (64 bytes) --- */
u8 network_hdr_type; /* 64 1 */
/* size: 72, cachelines: 2, members: 17 */
/* sum members: 62, holes: 2, sum holes: 3 */
/* padding: 7 */
/* last cacheline: 8 bytes */
};
Pahole output after this change:
struct ib_wc {
union {
u64 wr_id; /* 8 */
struct ib_cqe * wr_cqe; /* 8 */
}; /* 0 8 */
enum ib_wc_status status; /* 8 4 */
enum ib_wc_opcode opcode; /* 12 4 */
u32 vendor_err; /* 16 4 */
u32 byte_len; /* 20 4 */
struct ib_qp * qp; /* 24 8 */
union {
__be32 imm_data; /* 4 */
u32 invalidate_rkey; /* 4 */
} ex; /* 32 4 */
u32 src_qp; /* 36 4 */
u32 slid; /* 40 4 */
int wc_flags; /* 44 4 */
u16 pkey_index; /* 48 2 */
u8 sl; /* 50 1 */
u8 dlid_path_bits; /* 51 1 */
u8 port_num; /* 52 1 */
u8 smac[6]; /* 53 6 */
/* XXX 1 byte hole, try to pack */
u16 vlan_id; /* 60 2 */
u8 network_hdr_type; /* 62 1 */
/* size: 64, cachelines: 1, members: 17 */
/* sum members: 62, holes: 1, sum holes: 1 */
/* padding: 1 */
};
Fixes: 7db20ecd1d97 ("IB/core: Change wc.slid from 16 to 32 bits")
Signed-off-by: Bodong Wang <[email protected]>
Reviewed-by: Parav Pandit <[email protected]>
Signed-off-by: Leon Romanovsky <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
include/rdma/ib_verbs.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/include/rdma/ib_verbs.h
+++ b/include/rdma/ib_verbs.h
@@ -971,9 +971,9 @@ struct ib_wc {
u32 invalidate_rkey;
} ex;
u32 src_qp;
+ u32 slid;
int wc_flags;
u16 pkey_index;
- u32 slid;
u8 sl;
u8 dlid_path_bits;
u8 port_num; /* valid only for DR SMPs on switches */
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Sean Wang <[email protected]>
commit b96a696fb2a8dd1ee4e6cfee48dcac270fc53287 upstream.
Fix that bananapi-r2 booting from SD-card would fail since incorrect
polarity is applied to the previous setup with GPIO_ACTIVE_HIGH.
Cc: [email protected]
Fixes: 0eed8d097612 ("arm: dts: mt7623: Add SD-card and EMMC to bananapi-r2")
Signed-off-by: Sean Wang <[email protected]>
Tested-by: Matthias Brugger <[email protected]>
Signed-off-by: Matthias Brugger <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts
+++ b/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts
@@ -204,7 +204,7 @@
bus-width = <4>;
max-frequency = <50000000>;
cap-sd-highspeed;
- cd-gpios = <&pio 261 0>;
+ cd-gpios = <&pio 261 GPIO_ACTIVE_LOW>;
vmmc-supply = <&mt6323_vmch_reg>;
vqmmc-supply = <&mt6323_vio18_reg>;
};
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Mahesh Salgaonkar <[email protected]>
commit 8d81296cfcce89013a714feb8d25004a156f8181 upstream.
radix__flush_tlb_all() is called only in kexec path in real mode and any
tracepoints at this stage will make kexec to fail if enabled.
To verify enable tlbie trace before kexec.
$ echo 1 > /sys/kernel/debug/tracing/events/powerpc/tlbie/enable
== kexec into new kernel and kexec fails.
Fix this by not calling trace_tlbie from radix__flush_tlb_all().
Fixes: 0428491cba92 ("powerpc/mm: Trace tlbie(l) instructions")
Cc: [email protected] # v4.13+
Signed-off-by: Mahesh Salgaonkar <[email protected]>
Acked-by: Balbir Singh <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/powerpc/mm/tlb-radix.c | 2 --
1 file changed, 2 deletions(-)
--- a/arch/powerpc/mm/tlb-radix.c
+++ b/arch/powerpc/mm/tlb-radix.c
@@ -453,14 +453,12 @@ void radix__flush_tlb_all(void)
*/
asm volatile(PPC_TLBIE_5(%0, %4, %3, %2, %1)
: : "r"(rb), "i"(r), "i"(1), "i"(ric), "r"(rs) : "memory");
- trace_tlbie(0, 0, rb, rs, ric, prs, r);
/*
* now flush host entires by passing PRS = 0 and LPID == 0
*/
asm volatile(PPC_TLBIE_5(%0, %4, %3, %2, %1)
: : "r"(rb), "i"(r), "i"(prs), "i"(ric), "r"(0) : "memory");
asm volatile("eieio; tlbsync; ptesync": : :"memory");
- trace_tlbie(0, 0, rb, 0, ric, prs, r);
}
void radix__flush_tlb_pte_p9_dd1(unsigned long old_pte, struct mm_struct *mm,
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Brian Norris <[email protected]>
commit a64e7a79dd6030479caad603c8d78e6c9c14904f upstream.
Commit b014e96d1abb ("PCI: Protect pci_error_handlers->reset_notify()
usage with device_lock()") resolves races between driver reset and
removal, but it introduces some new deadlock problems. If we see a
timeout while we've already started suspending, removing, or shutting
down the driver, we might see:
(a) a worker thread, running mwifiex_pcie_work() ->
mwifiex_pcie_card_reset_work() -> pci_reset_function()
(b) a removal thread, running mwifiex_pcie_remove() ->
mwifiex_free_adapter() -> mwifiex_unregister() ->
mwifiex_cleanup_pcie() -> cancel_work_sync(&card->work)
Unfortunately, mwifiex_pcie_remove() already holds the device lock that
pci_reset_function() is now requesting, and so we see a deadlock.
It's necessary to cancel and synchronize our outstanding work before
tearing down the driver, so we can't have this work wait indefinitely
for the lock.
It's reasonable to only "try" to reset here, since this will mostly
happen for cases where it's already difficult to reset the firmware
anyway (e.g., while we're suspending or powering off the system). And if
reset *really* needs to happen, we can always try again later.
Fixes: b014e96d1abb ("PCI: Protect pci_error_handlers->reset_notify() usage with device_lock()")
Cc: <[email protected]>
Cc: Xinming Hu <[email protected]>
Signed-off-by: Brian Norris <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/wireless/marvell/mwifiex/pcie.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
--- a/drivers/net/wireless/marvell/mwifiex/pcie.c
+++ b/drivers/net/wireless/marvell/mwifiex/pcie.c
@@ -2781,7 +2781,10 @@ static void mwifiex_pcie_card_reset_work
{
struct pcie_service_card *card = adapter->card;
- pci_reset_function(card->dev);
+ /* We can't afford to wait here; remove() might be waiting on us. If we
+ * can't grab the device lock, maybe we'll get another chance later.
+ */
+ pci_try_reset_function(card->dev);
}
static void mwifiex_pcie_work(struct work_struct *work)
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Bart Van Assche <[email protected]>
commit bb3ffb7ad48a21e98a5c64eb21103a74fd9f03f6 upstream.
rxe_qp_cleanup() can sleep so it must be run in thread context and
not in atomic context. This patch avoids that the following bug is
triggered:
Kernel BUG at 00000000560033f3 [verbose debug info unavailable]
BUG: sleeping function called from invalid context at net/core/sock.c:2761
in_atomic(): 1, irqs_disabled(): 0, pid: 7, name: ksoftirqd/0
INFO: lockdep is turned off.
Preemption disabled at:
[<00000000b6e69628>] __do_softirq+0x4e/0x540
CPU: 0 PID: 7 Comm: ksoftirqd/0 Not tainted 4.15.0-rc7-dbg+ #4
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.0.0-prebuilt.qemu-project.org 04/01/2014
Call Trace:
dump_stack+0x85/0xbf
___might_sleep+0x177/0x260
lock_sock_nested+0x1d/0x90
inet_shutdown+0x2e/0xd0
rxe_qp_cleanup+0x107/0x140 [rdma_rxe]
rxe_elem_release+0x18/0x80 [rdma_rxe]
rxe_requester+0x1cf/0x11b0 [rdma_rxe]
rxe_do_task+0x78/0xf0 [rdma_rxe]
tasklet_action+0x99/0x270
__do_softirq+0xc0/0x540
run_ksoftirqd+0x1c/0x70
smpboot_thread_fn+0x1be/0x270
kthread+0x117/0x130
ret_from_fork+0x24/0x30
Signed-off-by: Bart Van Assche <[email protected]>
Cc: Moni Shoua <[email protected]>
Signed-off-by: Doug Ledford <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/infiniband/sw/rxe/rxe_qp.c | 12 ++++++++++--
drivers/infiniband/sw/rxe/rxe_verbs.h | 3 +++
2 files changed, 13 insertions(+), 2 deletions(-)
--- a/drivers/infiniband/sw/rxe/rxe_qp.c
+++ b/drivers/infiniband/sw/rxe/rxe_qp.c
@@ -824,9 +824,9 @@ void rxe_qp_destroy(struct rxe_qp *qp)
}
/* called when the last reference to the qp is dropped */
-void rxe_qp_cleanup(struct rxe_pool_entry *arg)
+static void rxe_qp_do_cleanup(struct work_struct *work)
{
- struct rxe_qp *qp = container_of(arg, typeof(*qp), pelem);
+ struct rxe_qp *qp = container_of(work, typeof(*qp), cleanup_work.work);
rxe_drop_all_mcast_groups(qp);
@@ -859,3 +859,11 @@ void rxe_qp_cleanup(struct rxe_pool_entr
kernel_sock_shutdown(qp->sk, SHUT_RDWR);
sock_release(qp->sk);
}
+
+/* called when the last reference to the qp is dropped */
+void rxe_qp_cleanup(struct rxe_pool_entry *arg)
+{
+ struct rxe_qp *qp = container_of(arg, typeof(*qp), pelem);
+
+ execute_in_process_context(rxe_qp_do_cleanup, &qp->cleanup_work);
+}
--- a/drivers/infiniband/sw/rxe/rxe_verbs.h
+++ b/drivers/infiniband/sw/rxe/rxe_verbs.h
@@ -35,6 +35,7 @@
#define RXE_VERBS_H
#include <linux/interrupt.h>
+#include <linux/workqueue.h>
#include <rdma/rdma_user_rxe.h>
#include "rxe_pool.h"
#include "rxe_task.h"
@@ -281,6 +282,8 @@ struct rxe_qp {
struct timer_list rnr_nak_timer;
spinlock_t state_lock; /* guard requester and completer */
+
+ struct execute_work cleanup_work;
};
enum rxe_mem_state {
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Randy Dunlap <[email protected]>
commit 68e76e034b6b1c1ce2eece1ab8ae4008e14be470 upstream.
I regularly get 50 MB - 60 MB files during kernel randconfig builds.
These large files mostly contain (many repeats of; e.g., 124,594):
In file included from ../include/linux/string.h:6:0,
from ../include/linux/uuid.h:20,
from ../include/linux/mod_devicetable.h:13,
from ../scripts/mod/devicetable-offsets.c:3:
../include/linux/compiler.h:64:4: warning: '______f' is static but declared in inline function 'strcpy' which is not static [enabled by default]
______f = { \
^
../include/linux/compiler.h:56:23: note: in expansion of macro '__trace_if'
^
../include/linux/string.h:425:2: note: in expansion of macro 'if'
if (p_size == (size_t)-1 && q_size == (size_t)-1)
^
This only happens when CONFIG_FORTIFY_SOURCE=y and
CONFIG_PROFILE_ALL_BRANCHES=y, so prevent PROFILE_ALL_BRANCHES if
FORTIFY_SOURCE=y.
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Randy Dunlap <[email protected]>
Signed-off-by: Steven Rostedt (VMware) <[email protected]>
Cc: Arnd Bergmann <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
kernel/trace/Kconfig | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/kernel/trace/Kconfig
+++ b/kernel/trace/Kconfig
@@ -343,7 +343,7 @@ config PROFILE_ANNOTATED_BRANCHES
on if you need to profile the system's use of these macros.
config PROFILE_ALL_BRANCHES
- bool "Profile all if conditionals"
+ bool "Profile all if conditionals" if !FORTIFY_SOURCE
select TRACE_BRANCH_PROFILING
help
This tracer profiles all branch conditions. Every if ()
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Bjorn Andersson <[email protected]>
commit d1bf2d30728f310f72296b54f0651ecdb09cbb12 upstream.
Propagate the error of devfreq_add_device() in devm_devfreq_add_device()
rather than statically returning ENOMEM. This makes it slightly faster
to pinpoint the cause of a returned error.
Fixes: 8cd84092d35e ("PM / devfreq: Add resource-managed function for devfreq device")
Cc: [email protected]
Acked-by: Chanwoo Choi <[email protected]>
Signed-off-by: Bjorn Andersson <[email protected]>
Signed-off-by: MyungJoo Ham <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/devfreq/devfreq.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/devfreq/devfreq.c
+++ b/drivers/devfreq/devfreq.c
@@ -676,7 +676,7 @@ struct devfreq *devm_devfreq_add_device(
devfreq = devfreq_add_device(dev, profile, governor_name, data);
if (IS_ERR(devfreq)) {
devres_free(ptr);
- return ERR_PTR(-ENOMEM);
+ return devfreq;
}
*ptr = devfreq;
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Gang He <[email protected]>
commit ff26cc10aec128c3f86b5611fd5f59c71d49c0e3 upstream.
If we can't get inode lock immediately in the function
ocfs2_inode_lock_with_page() when reading a page, we should not return
directly here, since this will lead to a softlockup problem when the
kernel is configured with CONFIG_PREEMPT is not set. The method is to
get a blocking lock and immediately unlock before returning, this can
avoid CPU resource waste due to lots of retries, and benefits fairness
in getting lock among multiple nodes, increase efficiency in case
modifying the same file frequently from multiple nodes.
The softlockup crash (when set /proc/sys/kernel/softlockup_panic to 1)
looks like:
Kernel panic - not syncing: softlockup: hung tasks
CPU: 0 PID: 885 Comm: multi_mmap Tainted: G L 4.12.14-6.1-default #1
Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
Call Trace:
<IRQ>
dump_stack+0x5c/0x82
panic+0xd5/0x21e
watchdog_timer_fn+0x208/0x210
__hrtimer_run_queues+0xcc/0x200
hrtimer_interrupt+0xa6/0x1f0
smp_apic_timer_interrupt+0x34/0x50
apic_timer_interrupt+0x96/0xa0
</IRQ>
RIP: 0010:unlock_page+0x17/0x30
RSP: 0000:ffffaf154080bc88 EFLAGS: 00000246 ORIG_RAX: ffffffffffffff10
RAX: dead000000000100 RBX: fffff21e009f5300 RCX: 0000000000000004
RDX: dead0000000000ff RSI: 0000000000000202 RDI: fffff21e009f5300
RBP: 0000000000000000 R08: 0000000000000000 R09: ffffaf154080bb00
R10: ffffaf154080bc30 R11: 0000000000000040 R12: ffff993749a39518
R13: 0000000000000000 R14: fffff21e009f5300 R15: fffff21e009f5300
ocfs2_inode_lock_with_page+0x25/0x30 [ocfs2]
ocfs2_readpage+0x41/0x2d0 [ocfs2]
filemap_fault+0x12b/0x5c0
ocfs2_fault+0x29/0xb0 [ocfs2]
__do_fault+0x1a/0xa0
__handle_mm_fault+0xbe8/0x1090
handle_mm_fault+0xaa/0x1f0
__do_page_fault+0x235/0x4b0
trace_do_page_fault+0x3c/0x110
async_page_fault+0x28/0x30
RIP: 0033:0x7fa75ded638e
RSP: 002b:00007ffd6657db18 EFLAGS: 00010287
RAX: 000055c7662fb700 RBX: 0000000000000001 RCX: 000055c7662fb700
RDX: 0000000000001770 RSI: 00007fa75e909000 RDI: 000055c7662fb700
RBP: 0000000000000003 R08: 000000000000000e R09: 0000000000000000
R10: 0000000000000483 R11: 00007fa75ded61b0 R12: 00007fa75e90a770
R13: 000000000000000e R14: 0000000000001770 R15: 0000000000000000
About performance improvement, we can see the testing time is reduced,
and CPU utilization decreases, the detailed data is as follows. I ran
multi_mmap test case in ocfs2-test package in a three nodes cluster.
Before applying this patch:
PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND
2754 ocfs2te+ 20 0 170248 6980 4856 D 80.73 0.341 0:18.71 multi_mmap
1505 root rt 0 222236 123060 97224 S 2.658 6.015 0:01.44 corosync
5 root 20 0 0 0 0 S 1.329 0.000 0:00.19 kworker/u8:0
95 root 20 0 0 0 0 S 1.329 0.000 0:00.25 kworker/u8:1
2728 root 20 0 0 0 0 S 0.997 0.000 0:00.24 jbd2/sda1-33
2721 root 20 0 0 0 0 S 0.664 0.000 0:00.07 ocfs2dc-3C8CFD4
2750 ocfs2te+ 20 0 142976 4652 3532 S 0.664 0.227 0:00.28 mpirun
ocfs2test@tb-node2:~>multiple_run.sh -i ens3 -k ~/linux-4.4.21-69.tar.gz -o ~/ocfs2mullog -C hacluster -s pcmk -n tb-node2,tb-node1,tb-node3 -d /dev/sda1 -b 4096 -c 32768 -t multi_mmap /mnt/shared
Tests with "-b 4096 -C 32768"
Thu Dec 28 14:44:52 CST 2017
multi_mmap..................................................Passed.
Runtime 783 seconds.
After apply this patch:
PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND
2508 ocfs2te+ 20 0 170248 6804 4680 R 54.00 0.333 0:55.37 multi_mmap
155 root 20 0 0 0 0 S 2.667 0.000 0:01.20 kworker/u8:3
95 root 20 0 0 0 0 S 2.000 0.000 0:01.58 kworker/u8:1
2504 ocfs2te+ 20 0 142976 4604 3480 R 1.667 0.225 0:01.65 mpirun
5 root 20 0 0 0 0 S 1.000 0.000 0:01.36 kworker/u8:0
2482 root 20 0 0 0 0 S 1.000 0.000 0:00.86 jbd2/sda1-33
299 root 0 -20 0 0 0 S 0.333 0.000 0:00.13 kworker/2:1H
335 root 0 -20 0 0 0 S 0.333 0.000 0:00.17 kworker/1:1H
535 root 20 0 12140 7268 1456 S 0.333 0.355 0:00.34 haveged
1282 root rt 0 222284 123108 97224 S 0.333 6.017 0:01.33 corosync
ocfs2test@tb-node2:~>multiple_run.sh -i ens3 -k ~/linux-4.4.21-69.tar.gz -o ~/ocfs2mullog -C hacluster -s pcmk -n tb-node2,tb-node1,tb-node3 -d /dev/sda1 -b 4096 -c 32768 -t multi_mmap /mnt/shared
Tests with "-b 4096 -C 32768"
Thu Dec 28 15:04:12 CST 2017
multi_mmap..................................................Passed.
Runtime 487 seconds.
Link: http://lkml.kernel.org/r/[email protected]
Fixes: 1cce4df04f37 ("ocfs2: do not lock/unlock() inode DLM lock")
Signed-off-by: Gang He <[email protected]>
Reviewed-by: Eric Ren <[email protected]>
Acked-by: alex chen <[email protected]>
Acked-by: piaojun <[email protected]>
Cc: Mark Fasheh <[email protected]>
Cc: Joel Becker <[email protected]>
Cc: Junxiao Bi <[email protected]>
Cc: Joseph Qi <[email protected]>
Cc: Changwei Ge <[email protected]>
Cc: <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/ocfs2/dlmglue.c | 9 +++++++++
1 file changed, 9 insertions(+)
--- a/fs/ocfs2/dlmglue.c
+++ b/fs/ocfs2/dlmglue.c
@@ -2486,6 +2486,15 @@ int ocfs2_inode_lock_with_page(struct in
ret = ocfs2_inode_lock_full(inode, ret_bh, ex, OCFS2_LOCK_NONBLOCK);
if (ret == -EAGAIN) {
unlock_page(page);
+ /*
+ * If we can't get inode lock immediately, we should not return
+ * directly here, since this will lead to a softlockup problem.
+ * The method is to get a blocking lock and immediately unlock
+ * before returning, this can avoid CPU resource waste due to
+ * lots of retries, and benefits fairness in getting lock.
+ */
+ if (ocfs2_inode_lock(inode, ret_bh, ex) == 0)
+ ocfs2_inode_unlock(inode, ex);
ret = AOP_TRUNCATED_PAGE;
}
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Benjamin Herrenschmidt <[email protected]>
commit f23ab3efb1b30cc5c5ef5ae4ef294ed467f30675 upstream.
Commit 398a719d34a1 ("powerpc/mm: Update bits used to skip hash_page")
mistakenly dropped the DSISR_DABRMATCH bit from the mask of bit tested
to skip trying to hash a page.
As a result, the DABR matches would no longer be detected.
This adds it back. We open code it in the 2 places where it matters
rather than fold it into DSISR_BAD_FAULT_32S/64S because this isn't
technically a bad fault and while we would never hit it with the
current code, I prefer if page_fault_is_bad() didn't trigger on these.
Fixes: 398a719d34a1 ("powerpc/mm: Update bits used to skip hash_page")
Cc: [email protected] # v4.14
Tested-by: Pedro Miraglia Franco de Carvalho <[email protected]>
Signed-off-by: Benjamin Herrenschmidt <[email protected]>
Signed-off-by: Naveen N. Rao <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/powerpc/kernel/exceptions-64s.S | 2 +-
arch/powerpc/kernel/head_32.S | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
--- a/arch/powerpc/kernel/exceptions-64s.S
+++ b/arch/powerpc/kernel/exceptions-64s.S
@@ -1617,7 +1617,7 @@ USE_TEXT_SECTION()
.balign IFETCH_ALIGN_BYTES
do_hash_page:
#ifdef CONFIG_PPC_STD_MMU_64
- lis r0,DSISR_BAD_FAULT_64S@h
+ lis r0,(DSISR_BAD_FAULT_64S|DSISR_DABRMATCH)@h
ori r0,r0,DSISR_BAD_FAULT_64S@l
and. r0,r4,r0 /* weird error? */
bne- handle_page_fault /* if not, try to insert a HPTE */
--- a/arch/powerpc/kernel/head_32.S
+++ b/arch/powerpc/kernel/head_32.S
@@ -388,7 +388,7 @@ DataAccess:
EXCEPTION_PROLOG
mfspr r10,SPRN_DSISR
stw r10,_DSISR(r11)
- andis. r0,r10,DSISR_BAD_FAULT_32S@h
+ andis. r0,r10,(DSISR_BAD_FAULT_32S|DSISR_DABRMATCH)@h
bne 1f /* if not, try to put a PTE */
mfspr r4,SPRN_DAR /* into the hash table */
rlwinm r3,r10,32-15,21,21 /* DSISR_STORE -> _PAGE_RW */
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Eugene Syromiatnikov <[email protected]>
commit 6dd0d2d22aa363fec075cb2577ba273ac8462e94 upstream.
For some reason, the implementation of some 16-bit ID system calls
(namely, setuid16/setgid16 and setfsuid16/setfsgid16) used type cast
instead of low2highgid/low2highuid macros for converting [GU]IDs, which
led to incorrect handling of value of -1 (which ought to be considered
invalid).
Discovered by strace test suite.
Cc: [email protected]
Signed-off-by: Eugene Syromiatnikov <[email protected]>
Signed-off-by: Heiko Carstens <[email protected]>
Signed-off-by: Martin Schwidefsky <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/s390/kernel/compat_linux.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
--- a/arch/s390/kernel/compat_linux.c
+++ b/arch/s390/kernel/compat_linux.c
@@ -110,7 +110,7 @@ COMPAT_SYSCALL_DEFINE2(s390_setregid16,
COMPAT_SYSCALL_DEFINE1(s390_setgid16, u16, gid)
{
- return sys_setgid((gid_t)gid);
+ return sys_setgid(low2highgid(gid));
}
COMPAT_SYSCALL_DEFINE2(s390_setreuid16, u16, ruid, u16, euid)
@@ -120,7 +120,7 @@ COMPAT_SYSCALL_DEFINE2(s390_setreuid16,
COMPAT_SYSCALL_DEFINE1(s390_setuid16, u16, uid)
{
- return sys_setuid((uid_t)uid);
+ return sys_setuid(low2highuid(uid));
}
COMPAT_SYSCALL_DEFINE3(s390_setresuid16, u16, ruid, u16, euid, u16, suid)
@@ -173,12 +173,12 @@ COMPAT_SYSCALL_DEFINE3(s390_getresgid16,
COMPAT_SYSCALL_DEFINE1(s390_setfsuid16, u16, uid)
{
- return sys_setfsuid((uid_t)uid);
+ return sys_setfsuid(low2highuid(uid));
}
COMPAT_SYSCALL_DEFINE1(s390_setfsgid16, u16, gid)
{
- return sys_setfsgid((gid_t)gid);
+ return sys_setfsgid(low2highgid(gid));
}
static int groups16_to_user(u16 __user *grouplist, struct group_info *group_info)
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Steffen Weber <[email protected]>
commit dc2db1dc5fb9ab3a43b305c2720fee5278dbee2a upstream.
If CONFIG_SCSI_SMARTPQI=y then don't build this driver as a module.
Signed-off-by: Steffen Weber <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/scsi/smartpqi/Makefile | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/scsi/smartpqi/Makefile
+++ b/drivers/scsi/smartpqi/Makefile
@@ -1,3 +1,3 @@
ccflags-y += -I.
-obj-m += smartpqi.o
+obj-$(CONFIG_SCSI_SMARTPQI) += smartpqi.o
smartpqi-objs := smartpqi_init.o smartpqi_sis.o smartpqi_sas_transport.o
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jack Morgenstein <[email protected]>
commit f23a5350e43c810ca36b26d4ed4ecd9a08686f47 upstream.
The ib_write_umad() is protected by taking the umad file mutex.
However, it accesses file->port->ib_dev -- which is protected only by the
port's mutex (field file_mutex).
The ib_umad_remove_one() calls ib_umad_kill_port() which sets
port->ib_dev to NULL under the port mutex (NOT the file mutex).
It then sets the mad agent to "dead" under the umad file mutex.
This is a race condition -- because there is a window where
port->ib_dev is NULL, while the agent is not "dead".
As a result, we saw stack traces like:
[16490.678059] BUG: unable to handle kernel NULL pointer dereference at 00000000000000b0
[16490.678246] IP: ib_umad_write+0x29c/0xa3a [ib_umad]
[16490.678333] PGD 0 P4D 0
[16490.678404] Oops: 0000 [#1] SMP PTI
[16490.678466] Modules linked in: rdma_ucm(OE) ib_ucm(OE) rdma_cm(OE) iw_cm(OE) ib_ipoib(OE) ib_cm(OE) ib_uverbs(OE) ib_umad(OE) mlx4_en(OE) ptp pps_core mlx4_ib(OE-) ib_core(OE) mlx4_core(OE) mlx_compat
(OE) memtrack(OE) devlink mst_pciconf(OE) mst_pci(OE) netconsole nfsv3 nfs_acl nfs lockd grace fscache cfg80211 rfkill esp6_offload esp6 esp4_offload esp4 sunrpc kvm_intel kvm ppdev parport_pc irqbypass
parport joydev i2c_piix4 virtio_balloon cirrus drm_kms_helper ttm drm e1000 serio_raw virtio_pci virtio_ring virtio ata_generic pata_acpi qemu_fw_cfg [last unloaded: mlxfw]
[16490.679202] CPU: 4 PID: 3115 Comm: sminfo Tainted: G OE 4.14.13-300.fc27.x86_64 #1
[16490.679339] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu2 04/01/2014
[16490.679477] task: ffff9cf753890000 task.stack: ffffaf70c26b0000
[16490.679571] RIP: 0010:ib_umad_write+0x29c/0xa3a [ib_umad]
[16490.679664] RSP: 0018:ffffaf70c26b3d90 EFLAGS: 00010202
[16490.679747] RAX: 0000000000000010 RBX: ffff9cf75610fd80 RCX: 0000000000000000
[16490.679856] RDX: 0000000000000001 RSI: 00007ffdf2bfd714 RDI: ffff9cf6bb2a9c00
In the above trace, ib_umad_write is trying to dereference the NULL
file->port->ib_dev pointer.
Fix this by using the agent's device pointer (the device field
in struct ib_mad_agent) -- which IS protected by the umad file mutex.
Fixes: 44c58487d51a ("IB/core: Define 'ib' and 'roce' rdma_ah_attr types")
Signed-off-by: Jack Morgenstein <[email protected]>
Signed-off-by: Leon Romanovsky <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/infiniband/core/user_mad.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/infiniband/core/user_mad.c
+++ b/drivers/infiniband/core/user_mad.c
@@ -500,7 +500,7 @@ static ssize_t ib_umad_write(struct file
}
memset(&ah_attr, 0, sizeof ah_attr);
- ah_attr.type = rdma_ah_find_type(file->port->ib_dev,
+ ah_attr.type = rdma_ah_find_type(agent->device,
file->port->port_num);
rdma_ah_set_dlid(&ah_attr, be16_to_cpu(packet->mad.hdr.lid));
rdma_ah_set_sl(&ah_attr, packet->mad.hdr.sl);
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Mike Marciniszyn <[email protected]>
commit 87b3524cb5058fdc7c2afdb92bdb2e079661ddc4 upstream.
This failure exists with qib:
ver_rc_compare_swap:
mismatch, sequence 2, expected 123456789abcdef, got 0
The request builder was using the incorrect inlines to
build the request header resulting in incorrect data
in the atomic header.
Fix by using the appropriate inlines to create the request.
Fixes: 261a4351844b ("IB/qib,IB/hfi: Use core common header file")
Reviewed-by: Michael J. Ruhl <[email protected]>
Signed-off-by: Mike Marciniszyn <[email protected]>
Signed-off-by: Dennis Dalessandro <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/infiniband/hw/qib/qib_rc.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
--- a/drivers/infiniband/hw/qib/qib_rc.c
+++ b/drivers/infiniband/hw/qib/qib_rc.c
@@ -434,13 +434,13 @@ no_flow_control:
qp->s_state = OP(COMPARE_SWAP);
put_ib_ateth_swap(wqe->atomic_wr.swap,
&ohdr->u.atomic_eth);
- put_ib_ateth_swap(wqe->atomic_wr.compare_add,
- &ohdr->u.atomic_eth);
+ put_ib_ateth_compare(wqe->atomic_wr.compare_add,
+ &ohdr->u.atomic_eth);
} else {
qp->s_state = OP(FETCH_ADD);
put_ib_ateth_swap(wqe->atomic_wr.compare_add,
&ohdr->u.atomic_eth);
- put_ib_ateth_swap(0, &ohdr->u.atomic_eth);
+ put_ib_ateth_compare(0, &ohdr->u.atomic_eth);
}
put_ib_ateth_vaddr(wqe->atomic_wr.remote_addr,
&ohdr->u.atomic_eth);
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jack Morgenstein <[email protected]>
commit 852f6927594d0d3e8632c889b2ab38cbc46476ad upstream.
Allocating steerable UD QPs depends on having at least one IB port,
while releasing those QPs does not.
As a result, when there are only ETH ports, the IB (RoCE) driver
requests releasing a qp range whose base qp is zero, with
qp count zero.
When SR-IOV is enabled, and the VF driver is running on a VM over
a hypervisor which treats such qp release calls as errors
(rather than NOPs), we see lines in the VM message log like:
mlx4_core 0002:00:02.0: Failed to release qp range base:0 cnt:0
Fix this by adding a check for a zero count in mlx4_release_qp_range()
(which thus treats releasing 0 qps as a nop), and eliminating the
check for device managed flow steering when releasing steerable UD QPs.
(Freeing ib_uc_qpns_bitmap unconditionally is also OK, since it
remains NULL when steerable UD QPs are not allocated).
Fixes: 4196670be786 ("IB/mlx4: Don't allocate range of steerable UD QPs for Ethernet-only device")
Signed-off-by: Jack Morgenstein <[email protected]>
Signed-off-by: Leon Romanovsky <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/infiniband/hw/mlx4/main.c | 13 +++++--------
drivers/net/ethernet/mellanox/mlx4/qp.c | 3 +++
2 files changed, 8 insertions(+), 8 deletions(-)
--- a/drivers/infiniband/hw/mlx4/main.c
+++ b/drivers/infiniband/hw/mlx4/main.c
@@ -2972,9 +2972,8 @@ err_steer_free_bitmap:
kfree(ibdev->ib_uc_qpns_bitmap);
err_steer_qp_release:
- if (ibdev->steering_support == MLX4_STEERING_MODE_DEVICE_MANAGED)
- mlx4_qp_release_range(dev, ibdev->steer_qpn_base,
- ibdev->steer_qpn_count);
+ mlx4_qp_release_range(dev, ibdev->steer_qpn_base,
+ ibdev->steer_qpn_count);
err_counter:
for (i = 0; i < ibdev->num_ports; ++i)
mlx4_ib_delete_counters_table(ibdev, &ibdev->counters_table[i]);
@@ -3079,11 +3078,9 @@ static void mlx4_ib_remove(struct mlx4_d
ibdev->iboe.nb.notifier_call = NULL;
}
- if (ibdev->steering_support == MLX4_STEERING_MODE_DEVICE_MANAGED) {
- mlx4_qp_release_range(dev, ibdev->steer_qpn_base,
- ibdev->steer_qpn_count);
- kfree(ibdev->ib_uc_qpns_bitmap);
- }
+ mlx4_qp_release_range(dev, ibdev->steer_qpn_base,
+ ibdev->steer_qpn_count);
+ kfree(ibdev->ib_uc_qpns_bitmap);
iounmap(ibdev->uar_map);
for (p = 0; p < ibdev->num_ports; ++p)
--- a/drivers/net/ethernet/mellanox/mlx4/qp.c
+++ b/drivers/net/ethernet/mellanox/mlx4/qp.c
@@ -287,6 +287,9 @@ void mlx4_qp_release_range(struct mlx4_d
u64 in_param = 0;
int err;
+ if (!cnt)
+ return;
+
if (mlx4_is_mfunc(dev)) {
set_param_l(&in_param, base_qpn);
set_param_h(&in_param, cnt);
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Geert Uytterhoeven <[email protected]>
commit df5d45aa08f848b79caf395211b222790534ccc7 upstream.
Create a new function attribute __optimize, which allows to specify an
optimization level on a per-function basis.
Signed-off-by: Geert Uytterhoeven <[email protected]>
Acked-by: Ard Biesheuvel <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
include/linux/compiler-gcc.h | 4 ++++
include/linux/compiler.h | 4 ++++
2 files changed, 8 insertions(+)
--- a/include/linux/compiler-gcc.h
+++ b/include/linux/compiler-gcc.h
@@ -196,6 +196,10 @@
#endif /* __CHECKER__ */
#endif /* GCC_VERSION >= 40300 */
+#if GCC_VERSION >= 40400
+#define __optimize(level) __attribute__((__optimize__(level)))
+#endif /* GCC_VERSION >= 40400 */
+
#if GCC_VERSION >= 40500
#ifndef __CHECKER__
--- a/include/linux/compiler.h
+++ b/include/linux/compiler.h
@@ -266,6 +266,10 @@ static __always_inline void __write_once
#endif /* __ASSEMBLY__ */
+#ifndef __optimize
+# define __optimize(level)
+#endif
+
/* Compile time object size, -1 for unknown */
#ifndef __compiletime_object_size
# define __compiletime_object_size(obj) -1
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Artem Savkov <[email protected]>
commit dd78c832ffaf86eb6434e56de4bc3bc31f03f771 upstream.
According to crypto/rng.h generate function should return 0 on success
and < 0 on error.
Fixes: b8ae5c7387ad ("crypto: sun4i-ss - support the Security System PRNG")
Signed-off-by: Artem Savkov <[email protected]>
Acked-by: Corentin Labbe <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/crypto/sunxi-ss/sun4i-ss-prng.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/crypto/sunxi-ss/sun4i-ss-prng.c
+++ b/drivers/crypto/sunxi-ss/sun4i-ss-prng.c
@@ -52,5 +52,5 @@ int sun4i_ss_prng_generate(struct crypto
writel(0, ss->base + SS_CTL);
spin_unlock(&ss->slock);
- return dlen;
+ return 0;
}
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Bart Van Assche <[email protected]>
commit 6f301e06de4cf9ab7303f5acd43e64fcd4aa04be upstream.
The following sequence:
* Change queue pair state into IB_QPS_ERR.
* Post a work request on the queue pair.
Triggers the following race condition in the rdma_rxe driver:
* rxe_qp_error() triggers an asynchronous call of rxe_completer(), the function
that examines the QP send queue.
* rxe_post_send() posts a work request on the QP send queue.
If rxe_completer() runs prior to rxe_post_send(), it will drain the send
queue and the driver will assume no further action is necessary.
However, once we post the send to the send queue, because the queue is
in error, no send completion will ever happen and the send will get
stuck. In order to process the send, we need to make sure that
rxe_completer() gets run after a send is posted to a queue pair in an
error state. This patch ensures that happens.
Signed-off-by: Bart Van Assche <[email protected]>
Cc: Moni Shoua <[email protected]>
Cc: <[email protected]> # v4.8
Signed-off-by: Doug Ledford <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/infiniband/sw/rxe/rxe_verbs.c | 2 ++
1 file changed, 2 insertions(+)
--- a/drivers/infiniband/sw/rxe/rxe_verbs.c
+++ b/drivers/infiniband/sw/rxe/rxe_verbs.c
@@ -813,6 +813,8 @@ static int rxe_post_send_kernel(struct r
(queue_count(qp->sq.queue) > 1);
rxe_run_task(&qp->req.task, must_sched);
+ if (unlikely(qp->req.state == QP_STATE_ERROR))
+ rxe_run_task(&qp->comp.task, 1);
return err;
}
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Shilpasri G Bhat <[email protected]>
commit 3fa4680b860bf48b437d6a2c039789c4abe202ae upstream.
Some OpenPOWER boxes can have same pstate values for nominal and
pmin pstates. In these boxes the current code will not initialize
'powernv_pstate_info.min' variable and result in erroneous CPU
frequency reporting. This patch fixes this problem.
Fixes: 09ca4c9b5958 (cpufreq: powernv: Replacing pstate_id with frequency table index)
Reported-by: Alvin Wang <[email protected]>
Signed-off-by: Shilpasri G Bhat <[email protected]>
Acked-by: Viresh Kumar <[email protected]>
Cc: 4.8+ <[email protected]> # 4.8+
Signed-off-by: Rafael J. Wysocki <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/cpufreq/powernv-cpufreq.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/drivers/cpufreq/powernv-cpufreq.c
+++ b/drivers/cpufreq/powernv-cpufreq.c
@@ -287,9 +287,9 @@ next:
if (id == pstate_max)
powernv_pstate_info.max = i;
- else if (id == pstate_nominal)
+ if (id == pstate_nominal)
powernv_pstate_info.nominal = i;
- else if (id == pstate_min)
+ if (id == pstate_min)
powernv_pstate_info.min = i;
if (powernv_pstate_info.wof_enabled && id == pstate_turbo) {
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Arnd Bergmann <[email protected]>
commit ca32e0c4bf9ca4b87089c5a5ce945e5f2ec890da upstream.
dtc warns about obviously incorrect GPIO numbers for the audio codec
on both lpc32xx boards:
arch/arm/boot/dts/lpc3250-phy3250.dtb: Warning (gpios_property): reset-gpio property size (12) too small for cell size 3 in /ahb/apb/i2c@400A0000/uda1380@18
arch/arm/boot/dts/lpc3250-phy3250.dtb: Warning (gpios_property): power-gpio property size (12) too small for cell size 3 in /ahb/apb/i2c@400A0000/uda1380@18
arch/arm/boot/dts/lpc3250-ea3250.dtb: Warning (gpios_property): reset-gpio property size (12) too small for cell size 3 in /ahb/apb/i2c@400A0000/uda1380@18
arch/arm/boot/dts/lpc3250-ea3250.dtb: Warning (gpios_property): power-gpio property size (12) too small for cell size 3 in /ahb/apb/i2c@400A0000/uda1380@18
It looks like the nodes are written for a different binding that combines
the GPIO number into a single number rather than a bank/number pair.
I found the right numbers on stackexchange.com, so this patch fixes
the warning and has a reasonable chance of getting things to actually
work.
Cc: [email protected]
Link: https://unix.stackexchange.com/questions/59497/alsa-asoc-how-to-correctly-load-devices-drivers/62217#62217
Signed-off-by: Arnd Bergmann <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/arm/boot/dts/lpc3250-ea3250.dts | 4 ++--
arch/arm/boot/dts/lpc3250-phy3250.dts | 4 ++--
2 files changed, 4 insertions(+), 4 deletions(-)
--- a/arch/arm/boot/dts/lpc3250-ea3250.dts
+++ b/arch/arm/boot/dts/lpc3250-ea3250.dts
@@ -156,8 +156,8 @@
uda1380: uda1380@18 {
compatible = "nxp,uda1380";
reg = <0x18>;
- power-gpio = <&gpio 0x59 0>;
- reset-gpio = <&gpio 0x51 0>;
+ power-gpio = <&gpio 3 10 0>;
+ reset-gpio = <&gpio 3 2 0>;
dac-clk = "wspll";
};
--- a/arch/arm/boot/dts/lpc3250-phy3250.dts
+++ b/arch/arm/boot/dts/lpc3250-phy3250.dts
@@ -81,8 +81,8 @@
uda1380: uda1380@18 {
compatible = "nxp,uda1380";
reg = <0x18>;
- power-gpio = <&gpio 0x59 0>;
- reset-gpio = <&gpio 0x51 0>;
+ power-gpio = <&gpio 3 10 0>;
+ reset-gpio = <&gpio 3 2 0>;
dac-clk = "wspll";
};
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Viresh Kumar <[email protected]>
commit cdd10409914184c7eee5ae3e11beb890c9c16c61 upstream.
The "dmas" cells for the designware DMA controller need to have only 3
properties apart from the phandle: request line, src master and
destination master. But the commit 6e8887f60f60 updated it incorrectly
while moving from platform code to DT. Fix it.
Cc: [email protected] # v3.10+
Fixes: 6e8887f60f60 ("ARM: SPEAr13xx: Pass generic DW DMAC platform data from DT")
Reported-by: Arnd Bergmann <[email protected]>
Signed-off-by: Viresh Kumar <[email protected]>
Signed-off-by: Olof Johansson <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
Documentation/devicetree/bindings/dma/snps-dma.txt | 2 +-
arch/arm/boot/dts/spear1340.dtsi | 4 ++--
arch/arm/boot/dts/spear13xx.dtsi | 6 +++---
3 files changed, 6 insertions(+), 6 deletions(-)
--- a/Documentation/devicetree/bindings/dma/snps-dma.txt
+++ b/Documentation/devicetree/bindings/dma/snps-dma.txt
@@ -64,6 +64,6 @@ Example:
reg = <0xe0000000 0x1000>;
interrupts = <0 35 0x4>;
dmas = <&dmahost 12 0 1>,
- <&dmahost 13 0 1 0>;
+ <&dmahost 13 1 0>;
dma-names = "rx", "rx";
};
--- a/arch/arm/boot/dts/spear1340.dtsi
+++ b/arch/arm/boot/dts/spear1340.dtsi
@@ -142,8 +142,8 @@
reg = <0xb4100000 0x1000>;
interrupts = <0 105 0x4>;
status = "disabled";
- dmas = <&dwdma0 0x600 0 0 1>, /* 0xC << 11 */
- <&dwdma0 0x680 0 1 0>; /* 0xD << 7 */
+ dmas = <&dwdma0 12 0 1>,
+ <&dwdma0 13 1 0>;
dma-names = "tx", "rx";
};
--- a/arch/arm/boot/dts/spear13xx.dtsi
+++ b/arch/arm/boot/dts/spear13xx.dtsi
@@ -100,7 +100,7 @@
reg = <0xb2800000 0x1000>;
interrupts = <0 29 0x4>;
status = "disabled";
- dmas = <&dwdma0 0 0 0 0>;
+ dmas = <&dwdma0 0 0 0>;
dma-names = "data";
};
@@ -290,8 +290,8 @@
#size-cells = <0>;
interrupts = <0 31 0x4>;
status = "disabled";
- dmas = <&dwdma0 0x2000 0 0 0>, /* 0x4 << 11 */
- <&dwdma0 0x0280 0 0 0>; /* 0x5 << 7 */
+ dmas = <&dwdma0 4 0 0>,
+ <&dwdma0 5 0 0>;
dma-names = "tx", "rx";
};
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Anders Roxell <[email protected]>
commit 912ec316686df352028afb6efec59e47a958a24d upstream.
aarch64-linux-gnu-gcc -Wl,-no-as-needed -Wall
-lpthread seccomp_bpf.c -o seccomp_bpf
seccomp_bpf.c: In function 'tracer_ptrace':
seccomp_bpf.c:1720:12: error: '__NR_open' undeclared
(first use in this function)
if (nr == __NR_open)
^~~~~~~~~
seccomp_bpf.c:1720:12: note: each undeclared identifier is reported
only once for each function it appears in
In file included from seccomp_bpf.c:48:0:
seccomp_bpf.c: In function 'TRACE_syscall_ptrace_syscall_dropped':
seccomp_bpf.c:1795:39: error: '__NR_open' undeclared
(first use in this function)
EXPECT_SYSCALL_RETURN(EPERM, syscall(__NR_open));
^
open(2) is a legacy syscall, replaced with openat(2) since 2.6.16.
Thus new architectures in the kernel, such as arm64, don't implement
these legacy syscalls.
Fixes: a33b2d0359a0 ("selftests/seccomp: Add tests for basic ptrace actions")
Signed-off-by: Anders Roxell <[email protected]>
Tested-by: Naresh Kamboju <[email protected]>
Cc: [email protected]
Acked-by: Kees Cook <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
tools/testing/selftests/seccomp/seccomp_bpf.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/tools/testing/selftests/seccomp/seccomp_bpf.c
+++ b/tools/testing/selftests/seccomp/seccomp_bpf.c
@@ -1717,7 +1717,7 @@ void tracer_ptrace(struct __test_metadat
if (nr == __NR_getpid)
change_syscall(_metadata, tracee, __NR_getppid);
- if (nr == __NR_open)
+ if (nr == __NR_openat)
change_syscall(_metadata, tracee, -1);
}
@@ -1792,7 +1792,7 @@ TEST_F(TRACE_syscall, ptrace_syscall_dro
true);
/* Tracer should skip the open syscall, resulting in EPERM. */
- EXPECT_SYSCALL_RETURN(EPERM, syscall(__NR_open));
+ EXPECT_SYSCALL_RETURN(EPERM, syscall(__NR_openat));
}
TEST_F(TRACE_syscall, syscall_allowed)
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Nadav Amit <[email protected]>
commit 14b1fcc62043729d12e8ae00f8297ab2ffe9fa91 upstream.
The comment is confusing since the path is taken when
CONFIG_PAGE_TABLE_ISOLATION=y is disabled (while the comment says it is not
taken).
Signed-off-by: Nadav Amit <[email protected]>
Cc: Andy Lutomirski <[email protected]>
Cc: Arjan van de Ven <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: Dan Williams <[email protected]>
Cc: Dave Hansen <[email protected]>
Cc: David Woodhouse <[email protected]>
Cc: Greg Kroah-Hartman <[email protected]>
Cc: Josh Poimboeuf <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: [email protected]
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Ingo Molnar <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/entry/entry_64.S | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/arch/x86/entry/entry_64.S
+++ b/arch/x86/entry/entry_64.S
@@ -209,7 +209,7 @@ ENTRY(entry_SYSCALL_64)
swapgs
/*
- * This path is not taken when PAGE_TABLE_ISOLATION is disabled so it
+ * This path is only taken when PAGE_TABLE_ISOLATION is disabled so it
* is not required to switch CR3.
*/
movq %rsp, PER_CPU_VAR(rsp_scratch)
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: David Woodhouse <[email protected]>
commit 1751342095f0d2b36fa8114d8e12c5688c455ac4 upstream.
Intel have retroactively blessed the 0xc2 microcode on Skylake mobile
and desktop parts, and the Gemini Lake 0x22 microcode is apparently fine
too. We blacklisted the latter purely because it was present with all
the other problematic ones in the 2018-01-08 release, but now it's
explicitly listed as OK.
We still list 0x84 for the various Kaby Lake / Coffee Lake parts, as
that appeared in one version of the blacklist and then reverted to
0x80 again. We can change it if 0x84 is actually announced to be safe.
Signed-off-by: David Woodhouse <[email protected]>
Cc: Andy Lutomirski <[email protected]>
Cc: Arjan van de Ven <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: Dan Williams <[email protected]>
Cc: Dave Hansen <[email protected]>
Cc: David Woodhouse <[email protected]>
Cc: Greg Kroah-Hartman <[email protected]>
Cc: Josh Poimboeuf <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Ingo Molnar <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/kernel/cpu/intel.c | 4 ----
1 file changed, 4 deletions(-)
--- a/arch/x86/kernel/cpu/intel.c
+++ b/arch/x86/kernel/cpu/intel.c
@@ -123,8 +123,6 @@ static const struct sku_microcode spectr
{ INTEL_FAM6_KABYLAKE_MOBILE, 0x09, 0x84 },
{ INTEL_FAM6_SKYLAKE_X, 0x03, 0x0100013e },
{ INTEL_FAM6_SKYLAKE_X, 0x04, 0x0200003c },
- { INTEL_FAM6_SKYLAKE_MOBILE, 0x03, 0xc2 },
- { INTEL_FAM6_SKYLAKE_DESKTOP, 0x03, 0xc2 },
{ INTEL_FAM6_BROADWELL_CORE, 0x04, 0x28 },
{ INTEL_FAM6_BROADWELL_GT3E, 0x01, 0x1b },
{ INTEL_FAM6_BROADWELL_XEON_D, 0x02, 0x14 },
@@ -136,8 +134,6 @@ static const struct sku_microcode spectr
{ INTEL_FAM6_HASWELL_X, 0x02, 0x3b },
{ INTEL_FAM6_HASWELL_X, 0x04, 0x10 },
{ INTEL_FAM6_IVYBRIDGE_X, 0x04, 0x42a },
- /* Updated in the 20180108 release; blacklist until we know otherwise */
- { INTEL_FAM6_ATOM_GEMINI_LAKE, 0x01, 0x22 },
/* Observed in the wild */
{ INTEL_FAM6_SANDYBRIDGE_X, 0x06, 0x61b },
{ INTEL_FAM6_SANDYBRIDGE_X, 0x07, 0x712 },
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Artem Savkov <[email protected]>
commit 2e7d1d61ea6c0f1c4da5eb82cafac750d55637a7 upstream.
Lockdep detects a possible deadlock in sun4i_ss_prng_generate() and
throws an "inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage" warning.
Disabling softirqs to fix this.
Fixes: b8ae5c7387ad ("crypto: sun4i-ss - support the Security System PRNG")
Signed-off-by: Artem Savkov <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/crypto/sunxi-ss/sun4i-ss-prng.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/drivers/crypto/sunxi-ss/sun4i-ss-prng.c
+++ b/drivers/crypto/sunxi-ss/sun4i-ss-prng.c
@@ -28,7 +28,7 @@ int sun4i_ss_prng_generate(struct crypto
algt = container_of(alg, struct sun4i_ss_alg_template, alg.rng);
ss = algt->ss;
- spin_lock(&ss->slock);
+ spin_lock_bh(&ss->slock);
writel(mode, ss->base + SS_CTL);
@@ -51,6 +51,6 @@ int sun4i_ss_prng_generate(struct crypto
}
writel(0, ss->base + SS_CTL);
- spin_unlock(&ss->slock);
+ spin_unlock_bh(&ss->slock);
return 0;
}
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: David Woodhouse <[email protected]>
commit d37fc6d360a404b208547ba112e7dabb6533c7fc upstream.
Arjan points out that the Intel document only clears the 0xc2 microcode
on *some* parts with CPUID 506E3 (INTEL_FAM6_SKYLAKE_DESKTOP stepping 3).
For the Skylake H/S platform it's OK but for Skylake E3 which has the
same CPUID it isn't (yet) cleared.
So removing it from the blacklist was premature. Put it back for now.
Also, Arjan assures me that the 0x84 microcode for Kaby Lake which was
featured in one of the early revisions of the Intel document was never
released to the public, and won't be until/unless it is also validated
as safe. So those can change to 0x80 which is what all *other* versions
of the doc have identified.
Once the retrospective testing of existing public microcodes is done, we
should be back into a mode where new microcodes are only released in
batches and we shouldn't even need to update the blacklist for those
anyway, so this tweaking of the list isn't expected to be a thing which
keeps happening.
Requested-by: Arjan van de Ven <[email protected]>
Signed-off-by: David Woodhouse <[email protected]>
Cc: Andy Lutomirski <[email protected]>
Cc: Arjan van de Ven <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: Dan Williams <[email protected]>
Cc: Dave Hansen <[email protected]>
Cc: David Woodhouse <[email protected]>
Cc: Greg Kroah-Hartman <[email protected]>
Cc: Josh Poimboeuf <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Ingo Molnar <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/kernel/cpu/intel.c | 11 ++++++-----
1 file changed, 6 insertions(+), 5 deletions(-)
--- a/arch/x86/kernel/cpu/intel.c
+++ b/arch/x86/kernel/cpu/intel.c
@@ -116,13 +116,14 @@ struct sku_microcode {
u32 microcode;
};
static const struct sku_microcode spectre_bad_microcodes[] = {
- { INTEL_FAM6_KABYLAKE_DESKTOP, 0x0B, 0x84 },
- { INTEL_FAM6_KABYLAKE_DESKTOP, 0x0A, 0x84 },
- { INTEL_FAM6_KABYLAKE_DESKTOP, 0x09, 0x84 },
- { INTEL_FAM6_KABYLAKE_MOBILE, 0x0A, 0x84 },
- { INTEL_FAM6_KABYLAKE_MOBILE, 0x09, 0x84 },
+ { INTEL_FAM6_KABYLAKE_DESKTOP, 0x0B, 0x80 },
+ { INTEL_FAM6_KABYLAKE_DESKTOP, 0x0A, 0x80 },
+ { INTEL_FAM6_KABYLAKE_DESKTOP, 0x09, 0x80 },
+ { INTEL_FAM6_KABYLAKE_MOBILE, 0x0A, 0x80 },
+ { INTEL_FAM6_KABYLAKE_MOBILE, 0x09, 0x80 },
{ INTEL_FAM6_SKYLAKE_X, 0x03, 0x0100013e },
{ INTEL_FAM6_SKYLAKE_X, 0x04, 0x0200003c },
+ { INTEL_FAM6_SKYLAKE_DESKTOP, 0x03, 0xc2 },
{ INTEL_FAM6_BROADWELL_CORE, 0x04, 0x28 },
{ INTEL_FAM6_BROADWELL_GT3E, 0x01, 0x1b },
{ INTEL_FAM6_BROADWELL_XEON_D, 0x02, 0x14 },
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Dan Williams <[email protected]>
commit 3ac6d8c787b835b997eb23e43e09aa0895ef7d58 upstream.
Clear the 'extra' registers on entering the 64-bit kernel for exceptions
and interrupts. The common registers are not cleared since they are
likely clobbered well before they can be exploited in a speculative
execution attack.
Originally-From: Andi Kleen <[email protected]>
Signed-off-by: Dan Williams <[email protected]>
Cc: <[email protected]>
Cc: Andy Lutomirski <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: Brian Gerst <[email protected]>
Cc: Denys Vlasenko <[email protected]>
Cc: H. Peter Anvin <[email protected]>
Cc: Josh Poimboeuf <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Link: http://lkml.kernel.org/r/151787989146.7847.15749181712358213254.stgit@dwillia2-desk3.amr.corp.intel.com
[ Made small improvements to the changelog and the code comments. ]
Signed-off-by: Ingo Molnar <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/entry/calling.h | 19 +++++++++++++++++++
arch/x86/entry/entry_64.S | 6 +++++-
2 files changed, 24 insertions(+), 1 deletion(-)
--- a/arch/x86/entry/calling.h
+++ b/arch/x86/entry/calling.h
@@ -147,6 +147,25 @@ For 32-bit we have the following convent
UNWIND_HINT_REGS offset=\offset
.endm
+ /*
+ * Sanitize registers of values that a speculation attack
+ * might otherwise want to exploit. The lower registers are
+ * likely clobbered well before they could be put to use in
+ * a speculative execution gadget:
+ */
+ .macro CLEAR_REGS_NOSPEC
+ xorl %ebp, %ebp
+ xorl %ebx, %ebx
+ xorq %r8, %r8
+ xorq %r9, %r9
+ xorq %r10, %r10
+ xorq %r11, %r11
+ xorq %r12, %r12
+ xorq %r13, %r13
+ xorq %r14, %r14
+ xorq %r15, %r15
+ .endm
+
.macro POP_EXTRA_REGS
popq %r15
popq %r14
--- a/arch/x86/entry/entry_64.S
+++ b/arch/x86/entry/entry_64.S
@@ -571,6 +571,7 @@ END(irq_entries_start)
ALLOC_PT_GPREGS_ON_STACK
SAVE_C_REGS
SAVE_EXTRA_REGS
+ CLEAR_REGS_NOSPEC
ENCODE_FRAME_POINTER
testb $3, CS(%rsp)
@@ -1127,6 +1128,7 @@ ENTRY(xen_failsafe_callback)
ALLOC_PT_GPREGS_ON_STACK
SAVE_C_REGS
SAVE_EXTRA_REGS
+ CLEAR_REGS_NOSPEC
ENCODE_FRAME_POINTER
jmp error_exit
END(xen_failsafe_callback)
@@ -1172,6 +1174,7 @@ ENTRY(paranoid_entry)
cld
SAVE_C_REGS 8
SAVE_EXTRA_REGS 8
+ CLEAR_REGS_NOSPEC
ENCODE_FRAME_POINTER 8
movl $1, %ebx
movl $MSR_GS_BASE, %ecx
@@ -1224,8 +1227,8 @@ ENTRY(error_entry)
cld
SAVE_C_REGS 8
SAVE_EXTRA_REGS 8
+ CLEAR_REGS_NOSPEC
ENCODE_FRAME_POINTER 8
- xorl %ebx, %ebx
testb $3, CS+8(%rsp)
jz .Lerror_kernelspace
@@ -1422,6 +1425,7 @@ ENTRY(nmi)
pushq %r14 /* pt_regs->r14 */
pushq %r15 /* pt_regs->r15 */
UNWIND_HINT_REGS
+ CLEAR_REGS_NOSPEC
ENCODE_FRAME_POINTER
/*
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Dominik Brodowski <[email protected]>
commit 2e3f0098bc45f710a2f4cbcc94b80a1fae7a99a1 upstream.
All current code paths call SAVE_C_REGS and then immediately
SAVE_EXTRA_REGS. Therefore, merge these two macros and order the MOV
sequeneces properly.
While at it, remove the macros to save all except specific registers,
as these macros have been unused for a long time.
Suggested-by: Linus Torvalds <[email protected]>
Signed-off-by: Dominik Brodowski <[email protected]>
Cc: Andy Lutomirski <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: Brian Gerst <[email protected]>
Cc: Denys Vlasenko <[email protected]>
Cc: H. Peter Anvin <[email protected]>
Cc: Josh Poimboeuf <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: [email protected]
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Ingo Molnar <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/entry/calling.h | 57 ++++++++++++----------------------------------
arch/x86/entry/entry_64.S | 12 +++------
2 files changed, 19 insertions(+), 50 deletions(-)
--- a/arch/x86/entry/calling.h
+++ b/arch/x86/entry/calling.h
@@ -101,49 +101,22 @@ For 32-bit we have the following convent
addq $-(15*8), %rsp
.endm
- .macro SAVE_C_REGS_HELPER offset=0 rax=1 rcx=1 r8910=1 r11=1
- .if \r11
- movq %r11, 6*8+\offset(%rsp)
- .endif
- .if \r8910
- movq %r10, 7*8+\offset(%rsp)
- movq %r9, 8*8+\offset(%rsp)
- movq %r8, 9*8+\offset(%rsp)
- .endif
- .if \rax
- movq %rax, 10*8+\offset(%rsp)
- .endif
- .if \rcx
- movq %rcx, 11*8+\offset(%rsp)
- .endif
- movq %rdx, 12*8+\offset(%rsp)
- movq %rsi, 13*8+\offset(%rsp)
+ .macro SAVE_REGS offset=0
movq %rdi, 14*8+\offset(%rsp)
- UNWIND_HINT_REGS offset=\offset extra=0
- .endm
- .macro SAVE_C_REGS offset=0
- SAVE_C_REGS_HELPER \offset, 1, 1, 1, 1
- .endm
- .macro SAVE_C_REGS_EXCEPT_RAX_RCX offset=0
- SAVE_C_REGS_HELPER \offset, 0, 0, 1, 1
- .endm
- .macro SAVE_C_REGS_EXCEPT_R891011
- SAVE_C_REGS_HELPER 0, 1, 1, 0, 0
- .endm
- .macro SAVE_C_REGS_EXCEPT_RCX_R891011
- SAVE_C_REGS_HELPER 0, 1, 0, 0, 0
- .endm
- .macro SAVE_C_REGS_EXCEPT_RAX_RCX_R11
- SAVE_C_REGS_HELPER 0, 0, 0, 1, 0
- .endm
-
- .macro SAVE_EXTRA_REGS offset=0
- movq %r15, 0*8+\offset(%rsp)
- movq %r14, 1*8+\offset(%rsp)
- movq %r13, 2*8+\offset(%rsp)
- movq %r12, 3*8+\offset(%rsp)
- movq %rbp, 4*8+\offset(%rsp)
+ movq %rsi, 13*8+\offset(%rsp)
+ movq %rdx, 12*8+\offset(%rsp)
+ movq %rcx, 11*8+\offset(%rsp)
+ movq %rax, 10*8+\offset(%rsp)
+ movq %r8, 9*8+\offset(%rsp)
+ movq %r9, 8*8+\offset(%rsp)
+ movq %r10, 7*8+\offset(%rsp)
+ movq %r11, 6*8+\offset(%rsp)
movq %rbx, 5*8+\offset(%rsp)
+ movq %rbp, 4*8+\offset(%rsp)
+ movq %r12, 3*8+\offset(%rsp)
+ movq %r13, 2*8+\offset(%rsp)
+ movq %r14, 1*8+\offset(%rsp)
+ movq %r15, 0*8+\offset(%rsp)
UNWIND_HINT_REGS offset=\offset
.endm
@@ -197,7 +170,7 @@ For 32-bit we have the following convent
* is just setting the LSB, which makes it an invalid stack address and is also
* a signal to the unwinder that it's a pt_regs pointer in disguise.
*
- * NOTE: This macro must be used *after* SAVE_EXTRA_REGS because it corrupts
+ * NOTE: This macro must be used *after* SAVE_REGS because it corrupts
* the original rbp.
*/
.macro ENCODE_FRAME_POINTER ptregs_offset=0
--- a/arch/x86/entry/entry_64.S
+++ b/arch/x86/entry/entry_64.S
@@ -569,8 +569,7 @@ END(irq_entries_start)
1:
ALLOC_PT_GPREGS_ON_STACK
- SAVE_C_REGS
- SAVE_EXTRA_REGS
+ SAVE_REGS
CLEAR_REGS_NOSPEC
ENCODE_FRAME_POINTER
@@ -1126,8 +1125,7 @@ ENTRY(xen_failsafe_callback)
UNWIND_HINT_IRET_REGS
pushq $-1 /* orig_ax = -1 => not a system call */
ALLOC_PT_GPREGS_ON_STACK
- SAVE_C_REGS
- SAVE_EXTRA_REGS
+ SAVE_REGS
CLEAR_REGS_NOSPEC
ENCODE_FRAME_POINTER
jmp error_exit
@@ -1172,8 +1170,7 @@ idtentry machine_check do_mce has_err
ENTRY(paranoid_entry)
UNWIND_HINT_FUNC
cld
- SAVE_C_REGS 8
- SAVE_EXTRA_REGS 8
+ SAVE_REGS 8
CLEAR_REGS_NOSPEC
ENCODE_FRAME_POINTER 8
movl $1, %ebx
@@ -1225,8 +1222,7 @@ END(paranoid_exit)
ENTRY(error_entry)
UNWIND_HINT_FUNC
cld
- SAVE_C_REGS 8
- SAVE_EXTRA_REGS 8
+ SAVE_REGS 8
CLEAR_REGS_NOSPEC
ENCODE_FRAME_POINTER 8
testb $3, CS+8(%rsp)
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Ingo Molnar <[email protected]>
commit 21e433bdb95bdf3aa48226fd3d33af608437f293 upstream.
Harmonize all the Spectre messages so that a:
dmesg | grep -i spectre
... gives us most Spectre related kernel boot messages.
Also fix a few other details:
- clarify a comment about firmware speculation control
- s/KPTI/PTI
- remove various line-breaks that made the code uglier
Acked-by: David Woodhouse <[email protected]>
Cc: Andy Lutomirski <[email protected]>
Cc: Arjan van de Ven <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: Dan Williams <[email protected]>
Cc: Dave Hansen <[email protected]>
Cc: David Woodhouse <[email protected]>
Cc: Greg Kroah-Hartman <[email protected]>
Cc: Josh Poimboeuf <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: [email protected]
Signed-off-by: Ingo Molnar <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/kernel/cpu/bugs.c | 28 +++++++++++-----------------
1 file changed, 11 insertions(+), 17 deletions(-)
--- a/arch/x86/kernel/cpu/bugs.c
+++ b/arch/x86/kernel/cpu/bugs.c
@@ -162,8 +162,7 @@ static enum spectre_v2_mitigation_cmd __
if (cmdline_find_option_bool(boot_command_line, "nospectre_v2"))
return SPECTRE_V2_CMD_NONE;
else {
- ret = cmdline_find_option(boot_command_line, "spectre_v2", arg,
- sizeof(arg));
+ ret = cmdline_find_option(boot_command_line, "spectre_v2", arg, sizeof(arg));
if (ret < 0)
return SPECTRE_V2_CMD_AUTO;
@@ -175,8 +174,7 @@ static enum spectre_v2_mitigation_cmd __
}
if (i >= ARRAY_SIZE(mitigation_options)) {
- pr_err("unknown option (%s). Switching to AUTO select\n",
- mitigation_options[i].option);
+ pr_err("unknown option (%s). Switching to AUTO select\n", mitigation_options[i].option);
return SPECTRE_V2_CMD_AUTO;
}
}
@@ -185,8 +183,7 @@ static enum spectre_v2_mitigation_cmd __
cmd == SPECTRE_V2_CMD_RETPOLINE_AMD ||
cmd == SPECTRE_V2_CMD_RETPOLINE_GENERIC) &&
!IS_ENABLED(CONFIG_RETPOLINE)) {
- pr_err("%s selected but not compiled in. Switching to AUTO select\n",
- mitigation_options[i].option);
+ pr_err("%s selected but not compiled in. Switching to AUTO select\n", mitigation_options[i].option);
return SPECTRE_V2_CMD_AUTO;
}
@@ -256,14 +253,14 @@ static void __init spectre_v2_select_mit
goto retpoline_auto;
break;
}
- pr_err("kernel not compiled with retpoline; no mitigation available!");
+ pr_err("Spectre mitigation: kernel not compiled with retpoline; no mitigation available!");
return;
retpoline_auto:
if (boot_cpu_data.x86_vendor == X86_VENDOR_AMD) {
retpoline_amd:
if (!boot_cpu_has(X86_FEATURE_LFENCE_RDTSC)) {
- pr_err("LFENCE not serializing. Switching to generic retpoline\n");
+ pr_err("Spectre mitigation: LFENCE not serializing, switching to generic retpoline\n");
goto retpoline_generic;
}
mode = retp_compiler() ? SPECTRE_V2_RETPOLINE_AMD :
@@ -281,7 +278,7 @@ retpoline_auto:
pr_info("%s\n", spectre_v2_strings[mode]);
/*
- * If neither SMEP or KPTI are available, there is a risk of
+ * If neither SMEP nor PTI are available, there is a risk of
* hitting userspace addresses in the RSB after a context switch
* from a shallow call stack to a deeper one. To prevent this fill
* the entire RSB, even when using IBRS.
@@ -295,21 +292,20 @@ retpoline_auto:
if ((!boot_cpu_has(X86_FEATURE_PTI) &&
!boot_cpu_has(X86_FEATURE_SMEP)) || is_skylake_era()) {
setup_force_cpu_cap(X86_FEATURE_RSB_CTXSW);
- pr_info("Filling RSB on context switch\n");
+ pr_info("Spectre v2 mitigation: Filling RSB on context switch\n");
}
/* Initialize Indirect Branch Prediction Barrier if supported */
if (boot_cpu_has(X86_FEATURE_IBPB)) {
setup_force_cpu_cap(X86_FEATURE_USE_IBPB);
- pr_info("Enabling Indirect Branch Prediction Barrier\n");
+ pr_info("Spectre v2 mitigation: Enabling Indirect Branch Prediction Barrier\n");
}
}
#undef pr_fmt
#ifdef CONFIG_SYSFS
-ssize_t cpu_show_meltdown(struct device *dev,
- struct device_attribute *attr, char *buf)
+ssize_t cpu_show_meltdown(struct device *dev, struct device_attribute *attr, char *buf)
{
if (!boot_cpu_has_bug(X86_BUG_CPU_MELTDOWN))
return sprintf(buf, "Not affected\n");
@@ -318,16 +314,14 @@ ssize_t cpu_show_meltdown(struct device
return sprintf(buf, "Vulnerable\n");
}
-ssize_t cpu_show_spectre_v1(struct device *dev,
- struct device_attribute *attr, char *buf)
+ssize_t cpu_show_spectre_v1(struct device *dev, struct device_attribute *attr, char *buf)
{
if (!boot_cpu_has_bug(X86_BUG_SPECTRE_V1))
return sprintf(buf, "Not affected\n");
return sprintf(buf, "Mitigation: __user pointer sanitization\n");
}
-ssize_t cpu_show_spectre_v2(struct device *dev,
- struct device_attribute *attr, char *buf)
+ssize_t cpu_show_spectre_v2(struct device *dev, struct device_attribute *attr, char *buf)
{
if (!boot_cpu_has_bug(X86_BUG_SPECTRE_V2))
return sprintf(buf, "Not affected\n");
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Dominik Brodowski <[email protected]>
commit 30907fd13bb593202574bb20af58d67c70a1ee14 upstream.
entry_SYSCALL_64_after_hwframe() and nmi() can be converted to use
PUSH_AND_CLEAN_REGS instead of opencoded variants thereof. Due to
the interleaving, the additional XOR-based clearing of R8 and R9
in entry_SYSCALL_64_after_hwframe() should not have any noticeable
negative implications.
Suggested-by: Linus Torvalds <[email protected]>
Signed-off-by: Dominik Brodowski <[email protected]>
Cc: Andy Lutomirski <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: Brian Gerst <[email protected]>
Cc: Denys Vlasenko <[email protected]>
Cc: H. Peter Anvin <[email protected]>
Cc: Josh Poimboeuf <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: [email protected]
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Ingo Molnar <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/entry/calling.h | 6 ++--
arch/x86/entry/entry_64.S | 65 ++--------------------------------------------
2 files changed, 6 insertions(+), 65 deletions(-)
--- a/arch/x86/entry/calling.h
+++ b/arch/x86/entry/calling.h
@@ -137,7 +137,7 @@ For 32-bit we have the following convent
UNWIND_HINT_REGS offset=\offset
.endm
- .macro PUSH_AND_CLEAR_REGS
+ .macro PUSH_AND_CLEAR_REGS rdx=%rdx rax=%rax
/*
* Push registers and sanitize registers of values that a
* speculation attack might otherwise want to exploit. The
@@ -147,9 +147,9 @@ For 32-bit we have the following convent
*/
pushq %rdi /* pt_regs->di */
pushq %rsi /* pt_regs->si */
- pushq %rdx /* pt_regs->dx */
+ pushq \rdx /* pt_regs->dx */
pushq %rcx /* pt_regs->cx */
- pushq %rax /* pt_regs->ax */
+ pushq \rax /* pt_regs->ax */
pushq %r8 /* pt_regs->r8 */
xorq %r8, %r8 /* nospec r8 */
pushq %r9 /* pt_regs->r9 */
--- a/arch/x86/entry/entry_64.S
+++ b/arch/x86/entry/entry_64.S
@@ -223,35 +223,8 @@ ENTRY(entry_SYSCALL_64)
pushq %rcx /* pt_regs->ip */
GLOBAL(entry_SYSCALL_64_after_hwframe)
pushq %rax /* pt_regs->orig_ax */
- pushq %rdi /* pt_regs->di */
- pushq %rsi /* pt_regs->si */
- pushq %rdx /* pt_regs->dx */
- pushq %rcx /* pt_regs->cx */
- pushq $-ENOSYS /* pt_regs->ax */
- pushq %r8 /* pt_regs->r8 */
- pushq %r9 /* pt_regs->r9 */
- pushq %r10 /* pt_regs->r10 */
- /*
- * Clear extra registers that a speculation attack might
- * otherwise want to exploit. Interleave XOR with PUSH
- * for better uop scheduling:
- */
- xorq %r10, %r10 /* nospec r10 */
- pushq %r11 /* pt_regs->r11 */
- xorq %r11, %r11 /* nospec r11 */
- pushq %rbx /* pt_regs->rbx */
- xorl %ebx, %ebx /* nospec rbx */
- pushq %rbp /* pt_regs->rbp */
- xorl %ebp, %ebp /* nospec rbp */
- pushq %r12 /* pt_regs->r12 */
- xorq %r12, %r12 /* nospec r12 */
- pushq %r13 /* pt_regs->r13 */
- xorq %r13, %r13 /* nospec r13 */
- pushq %r14 /* pt_regs->r14 */
- xorq %r14, %r14 /* nospec r14 */
- pushq %r15 /* pt_regs->r15 */
- xorq %r15, %r15 /* nospec r15 */
- UNWIND_HINT_REGS
+
+ PUSH_AND_CLEAR_REGS rax=$-ENOSYS
TRACE_IRQS_OFF
@@ -1382,39 +1355,7 @@ ENTRY(nmi)
pushq 1*8(%rdx) /* pt_regs->rip */
UNWIND_HINT_IRET_REGS
pushq $-1 /* pt_regs->orig_ax */
- pushq %rdi /* pt_regs->di */
- pushq %rsi /* pt_regs->si */
- pushq (%rdx) /* pt_regs->dx */
- pushq %rcx /* pt_regs->cx */
- pushq %rax /* pt_regs->ax */
- /*
- * Sanitize registers of values that a speculation attack
- * might otherwise want to exploit. The lower registers are
- * likely clobbered well before they could be put to use in
- * a speculative execution gadget. Interleave XOR with PUSH
- * for better uop scheduling:
- */
- pushq %r8 /* pt_regs->r8 */
- xorq %r8, %r8 /* nospec r8 */
- pushq %r9 /* pt_regs->r9 */
- xorq %r9, %r9 /* nospec r9 */
- pushq %r10 /* pt_regs->r10 */
- xorq %r10, %r10 /* nospec r10 */
- pushq %r11 /* pt_regs->r11 */
- xorq %r11, %r11 /* nospec r11*/
- pushq %rbx /* pt_regs->rbx */
- xorl %ebx, %ebx /* nospec rbx*/
- pushq %rbp /* pt_regs->rbp */
- xorl %ebp, %ebp /* nospec rbp*/
- pushq %r12 /* pt_regs->r12 */
- xorq %r12, %r12 /* nospec r12*/
- pushq %r13 /* pt_regs->r13 */
- xorq %r13, %r13 /* nospec r13*/
- pushq %r14 /* pt_regs->r14 */
- xorq %r14, %r14 /* nospec r14*/
- pushq %r15 /* pt_regs->r15 */
- xorq %r15, %r15 /* nospec r15*/
- UNWIND_HINT_REGS
+ PUSH_AND_CLEAR_REGS rdx=(%rdx)
ENCODE_FRAME_POINTER
/*
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Dominik Brodowski <[email protected]>
commit dde3036d62ba3375840b10ab9ec0d568fd773b07 upstream.
Previously, error_entry() and paranoid_entry() saved the GP registers
onto stack space previously allocated by its callers. Combine these two
steps in the callers, and use the generic PUSH_AND_CLEAR_REGS macro
for that.
This adds a significant amount ot text size. However, Ingo Molnar points
out that:
"these numbers also _very_ significantly over-represent the
extra footprint. The assumptions that resulted in
us compressing the IRQ entry code have changed very
significantly with the new x86 IRQ allocation code we
introduced in the last year:
- IRQ vectors are usually populated in tightly clustered
groups.
With our new vector allocator code the typical per CPU
allocation percentage on x86 systems is ~3 device vectors
and ~10 fixed vectors out of ~220 vectors - i.e. a very
low ~6% utilization (!). [...]
The days where we allocated a lot of vectors on every
CPU and the compression of the IRQ entry code text
mattered are over.
- Another issue is that only a small minority of vectors
is frequent enough to actually matter to cache utilization
in practice: 3-4 key IPIs and 1-2 device IRQs at most - and
those vectors tend to be tightly clustered as well into about
two groups, and are probably already on 2-3 cache lines in
practice.
For the common case of 'cache cold' IRQs it's the depth of
the call chain and the fragmentation of the resulting I$
that should be the main performance limit - not the overall
size of it.
- The CPU side cost of IRQ delivery is still very expensive
even in the best, most cached case, as in 'over a thousand
cycles'. So much stuff is done that maybe contemporary x86
IRQ entry microcode already prefetches the IDT entry and its
expected call target address."[*]
[*] http://lkml.kernel.org/r/[email protected]
The "testb $3, CS(%rsp)" instruction in the idtentry macro does not need
modification. Previously, %rsp was manually decreased by 15*8; with
this patch, %rsp is decreased by 15 pushq instructions.
[[email protected]: unwind hint improvements]
Suggested-by: Linus Torvalds <[email protected]>
Signed-off-by: Dominik Brodowski <[email protected]>
Cc: Andy Lutomirski <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: Brian Gerst <[email protected]>
Cc: Denys Vlasenko <[email protected]>
Cc: H. Peter Anvin <[email protected]>
Cc: Josh Poimboeuf <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: [email protected]
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Ingo Molnar <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/entry/calling.h | 42 +-----------------------------------------
arch/x86/entry/entry_64.S | 20 +++++++++-----------
2 files changed, 10 insertions(+), 52 deletions(-)
--- a/arch/x86/entry/calling.h
+++ b/arch/x86/entry/calling.h
@@ -97,46 +97,6 @@ For 32-bit we have the following convent
#define SIZEOF_PTREGS 21*8
- .macro ALLOC_PT_GPREGS_ON_STACK
- addq $-(15*8), %rsp
- .endm
-
- .macro SAVE_AND_CLEAR_REGS offset=0
- /*
- * Save registers and sanitize registers of values that a
- * speculation attack might otherwise want to exploit. The
- * lower registers are likely clobbered well before they
- * could be put to use in a speculative execution gadget.
- * Interleave XOR with PUSH for better uop scheduling:
- */
- movq %rdi, 14*8+\offset(%rsp)
- movq %rsi, 13*8+\offset(%rsp)
- movq %rdx, 12*8+\offset(%rsp)
- movq %rcx, 11*8+\offset(%rsp)
- movq %rax, 10*8+\offset(%rsp)
- movq %r8, 9*8+\offset(%rsp)
- xorq %r8, %r8 /* nospec r8 */
- movq %r9, 8*8+\offset(%rsp)
- xorq %r9, %r9 /* nospec r9 */
- movq %r10, 7*8+\offset(%rsp)
- xorq %r10, %r10 /* nospec r10 */
- movq %r11, 6*8+\offset(%rsp)
- xorq %r11, %r11 /* nospec r11 */
- movq %rbx, 5*8+\offset(%rsp)
- xorl %ebx, %ebx /* nospec rbx */
- movq %rbp, 4*8+\offset(%rsp)
- xorl %ebp, %ebp /* nospec rbp */
- movq %r12, 3*8+\offset(%rsp)
- xorq %r12, %r12 /* nospec r12 */
- movq %r13, 2*8+\offset(%rsp)
- xorq %r13, %r13 /* nospec r13 */
- movq %r14, 1*8+\offset(%rsp)
- xorq %r14, %r14 /* nospec r14 */
- movq %r15, 0*8+\offset(%rsp)
- xorq %r15, %r15 /* nospec r15 */
- UNWIND_HINT_REGS offset=\offset
- .endm
-
.macro PUSH_AND_CLEAR_REGS rdx=%rdx rax=%rax
/*
* Push registers and sanitize registers of values that a
@@ -211,7 +171,7 @@ For 32-bit we have the following convent
* is just setting the LSB, which makes it an invalid stack address and is also
* a signal to the unwinder that it's a pt_regs pointer in disguise.
*
- * NOTE: This macro must be used *after* SAVE_AND_CLEAR_REGS because it corrupts
+ * NOTE: This macro must be used *after* PUSH_AND_CLEAR_REGS because it corrupts
* the original rbp.
*/
.macro ENCODE_FRAME_POINTER ptregs_offset=0
--- a/arch/x86/entry/entry_64.S
+++ b/arch/x86/entry/entry_64.S
@@ -867,7 +867,9 @@ ENTRY(\sym)
pushq $-1 /* ORIG_RAX: no syscall to restart */
.endif
- ALLOC_PT_GPREGS_ON_STACK
+ /* Save all registers in pt_regs */
+ PUSH_AND_CLEAR_REGS
+ ENCODE_FRAME_POINTER
.if \paranoid < 2
testb $3, CS(%rsp) /* If coming from userspace, switch stacks */
@@ -1115,15 +1117,12 @@ idtentry machine_check do_mce has_err
#endif
/*
- * Save all registers in pt_regs, and switch gs if needed.
+ * Switch gs if needed.
* Use slow, but surefire "are we in kernel?" check.
* Return: ebx=0: need swapgs on exit, ebx=1: otherwise
*/
ENTRY(paranoid_entry)
- UNWIND_HINT_FUNC
cld
- SAVE_AND_CLEAR_REGS 8
- ENCODE_FRAME_POINTER 8
movl $1, %ebx
movl $MSR_GS_BASE, %ecx
rdmsr
@@ -1136,7 +1135,7 @@ ENTRY(paranoid_entry)
SAVE_AND_SWITCH_TO_KERNEL_CR3 scratch_reg=%rax save_reg=%r14
ret
-END(paranoid_entry)
+ENDPROC(paranoid_entry)
/*
* "Paranoid" exit path from exception stack. This is invoked
@@ -1167,14 +1166,12 @@ ENTRY(paranoid_exit)
END(paranoid_exit)
/*
- * Save all registers in pt_regs, and switch gs if needed.
+ * Switch gs if needed.
* Return: EBX=0: came from user mode; EBX=1: otherwise
*/
ENTRY(error_entry)
- UNWIND_HINT_FUNC
+ UNWIND_HINT_REGS offset=8
cld
- SAVE_AND_CLEAR_REGS 8
- ENCODE_FRAME_POINTER 8
testb $3, CS+8(%rsp)
jz .Lerror_kernelspace
@@ -1565,7 +1562,8 @@ end_repeat_nmi:
* frame to point back to repeat_nmi.
*/
pushq $-1 /* ORIG_RAX: no syscall to restart */
- ALLOC_PT_GPREGS_ON_STACK
+ PUSH_AND_CLEAR_REGS
+ ENCODE_FRAME_POINTER
/*
* Use paranoid_entry to handle SWAPGS, but no need to use paranoid_exit
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Lionel Landwerlin <[email protected]>
commit 0890540e21cf1156b4cf960a4c1c734db4e816f9 upstream.
Up to Coffeelake we could deduce this GT number from the device ID.
This doesn't seem to be the case anymore. This change reorders pciids
per GT and adds a gt field to intel_device_info. We set this field on
the following platforms :
- SNB/IVB/HSW/BDW/SKL/KBL/CFL/CNL
Before & After :
$ modinfo drivers/gpu/drm/i915/i915.ko | grep ^alias | wc -l
209
v2: Add SNB & IVB (Chris)
v3: Fix compilation error in early-quirks (Lionel)
v4: Fix inconsistency between FEATURE/PLATFORM macros (Ville)
Signed-off-by: Lionel Landwerlin <[email protected]>
Reviewed-by: Chris Wilson <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpu/drm/i915/i915_drv.h | 1
drivers/gpu/drm/i915/i915_pci.c | 193 +++++++++++++++++++++++++++++++---------
include/drm/i915_pciids.h | 152 +++++++++++++++++++------------
3 files changed, 246 insertions(+), 100 deletions(-)
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -842,6 +842,7 @@ struct intel_device_info {
u8 gen;
u16 gen_mask;
enum intel_platform platform;
+ u8 gt; /* GT number, 0 if undefined */
u8 ring_mask; /* Rings supported by the HW */
u8 num_rings;
#define DEFINE_FLAG(name) u8 name:1
--- a/drivers/gpu/drm/i915/i915_pci.c
+++ b/drivers/gpu/drm/i915/i915_pci.c
@@ -224,15 +224,34 @@ static const struct intel_device_info in
GEN_DEFAULT_PIPEOFFSETS, \
CURSOR_OFFSETS
-static const struct intel_device_info intel_sandybridge_d_info = {
- GEN6_FEATURES,
- .platform = INTEL_SANDYBRIDGE,
+#define SNB_D_PLATFORM \
+ GEN6_FEATURES, \
+ .platform = INTEL_SANDYBRIDGE
+
+static const struct intel_device_info intel_sandybridge_d_gt1_info = {
+ SNB_D_PLATFORM,
+ .gt = 1,
+};
+
+static const struct intel_device_info intel_sandybridge_d_gt2_info = {
+ SNB_D_PLATFORM,
+ .gt = 2,
+};
+
+#define SNB_M_PLATFORM \
+ GEN6_FEATURES, \
+ .platform = INTEL_SANDYBRIDGE, \
+ .is_mobile = 1
+
+
+static const struct intel_device_info intel_sandybridge_m_gt1_info = {
+ SNB_M_PLATFORM,
+ .gt = 1,
};
-static const struct intel_device_info intel_sandybridge_m_info = {
- GEN6_FEATURES,
- .platform = INTEL_SANDYBRIDGE,
- .is_mobile = 1,
+static const struct intel_device_info intel_sandybridge_m_gt2_info = {
+ SNB_M_PLATFORM,
+ .gt = 2,
};
#define GEN7_FEATURES \
@@ -249,22 +268,41 @@ static const struct intel_device_info in
GEN_DEFAULT_PIPEOFFSETS, \
IVB_CURSOR_OFFSETS
-static const struct intel_device_info intel_ivybridge_d_info = {
- GEN7_FEATURES,
- .platform = INTEL_IVYBRIDGE,
- .has_l3_dpf = 1,
+#define IVB_D_PLATFORM \
+ GEN7_FEATURES, \
+ .platform = INTEL_IVYBRIDGE, \
+ .has_l3_dpf = 1
+
+static const struct intel_device_info intel_ivybridge_d_gt1_info = {
+ IVB_D_PLATFORM,
+ .gt = 1,
};
-static const struct intel_device_info intel_ivybridge_m_info = {
- GEN7_FEATURES,
- .platform = INTEL_IVYBRIDGE,
- .is_mobile = 1,
- .has_l3_dpf = 1,
+static const struct intel_device_info intel_ivybridge_d_gt2_info = {
+ IVB_D_PLATFORM,
+ .gt = 2,
+};
+
+#define IVB_M_PLATFORM \
+ GEN7_FEATURES, \
+ .platform = INTEL_IVYBRIDGE, \
+ .is_mobile = 1, \
+ .has_l3_dpf = 1
+
+static const struct intel_device_info intel_ivybridge_m_gt1_info = {
+ IVB_M_PLATFORM,
+ .gt = 1,
+};
+
+static const struct intel_device_info intel_ivybridge_m_gt2_info = {
+ IVB_M_PLATFORM,
+ .gt = 2,
};
static const struct intel_device_info intel_ivybridge_q_info = {
GEN7_FEATURES,
.platform = INTEL_IVYBRIDGE,
+ .gt = 2,
.num_pipes = 0, /* legal, last one wins */
.has_l3_dpf = 1,
};
@@ -299,10 +337,24 @@ static const struct intel_device_info in
.has_rc6p = 0 /* RC6p removed-by HSW */, \
.has_runtime_pm = 1
-static const struct intel_device_info intel_haswell_info = {
- HSW_FEATURES,
- .platform = INTEL_HASWELL,
- .has_l3_dpf = 1,
+#define HSW_PLATFORM \
+ HSW_FEATURES, \
+ .platform = INTEL_HASWELL, \
+ .has_l3_dpf = 1
+
+static const struct intel_device_info intel_haswell_gt1_info = {
+ HSW_PLATFORM,
+ .gt = 1,
+};
+
+static const struct intel_device_info intel_haswell_gt2_info = {
+ HSW_PLATFORM,
+ .gt = 2,
+};
+
+static const struct intel_device_info intel_haswell_gt3_info = {
+ HSW_PLATFORM,
+ .gt = 3,
};
#define BDW_FEATURES \
@@ -318,12 +370,27 @@ static const struct intel_device_info in
.gen = 8, \
.platform = INTEL_BROADWELL
-static const struct intel_device_info intel_broadwell_info = {
+static const struct intel_device_info intel_broadwell_gt1_info = {
+ BDW_PLATFORM,
+ .gt = 1,
+};
+
+static const struct intel_device_info intel_broadwell_gt2_info = {
BDW_PLATFORM,
+ .gt = 2,
+};
+
+static const struct intel_device_info intel_broadwell_rsvd_info = {
+ BDW_PLATFORM,
+ .gt = 3,
+ /* According to the device ID those devices are GT3, they were
+ * previously treated as not GT3, keep it like that.
+ */
};
static const struct intel_device_info intel_broadwell_gt3_info = {
BDW_PLATFORM,
+ .gt = 3,
.ring_mask = RENDER_RING | BSD_RING | BLT_RING | VEBOX_RING | BSD2_RING,
};
@@ -358,13 +425,29 @@ static const struct intel_device_info in
.has_guc = 1, \
.ddb_size = 896
-static const struct intel_device_info intel_skylake_info = {
+static const struct intel_device_info intel_skylake_gt1_info = {
SKL_PLATFORM,
+ .gt = 1,
};
-static const struct intel_device_info intel_skylake_gt3_info = {
+static const struct intel_device_info intel_skylake_gt2_info = {
SKL_PLATFORM,
- .ring_mask = RENDER_RING | BSD_RING | BLT_RING | VEBOX_RING | BSD2_RING,
+ .gt = 2,
+};
+
+#define SKL_GT3_PLUS_PLATFORM \
+ SKL_PLATFORM, \
+ .ring_mask = RENDER_RING | BSD_RING | BLT_RING | VEBOX_RING | BSD2_RING
+
+
+static const struct intel_device_info intel_skylake_gt3_info = {
+ SKL_GT3_PLUS_PLATFORM,
+ .gt = 3,
+};
+
+static const struct intel_device_info intel_skylake_gt4_info = {
+ SKL_GT3_PLUS_PLATFORM,
+ .gt = 4,
};
#define GEN9_LP_FEATURES \
@@ -416,12 +499,19 @@ static const struct intel_device_info in
.has_guc = 1, \
.ddb_size = 896
-static const struct intel_device_info intel_kabylake_info = {
+static const struct intel_device_info intel_kabylake_gt1_info = {
KBL_PLATFORM,
+ .gt = 1,
+};
+
+static const struct intel_device_info intel_kabylake_gt2_info = {
+ KBL_PLATFORM,
+ .gt = 2,
};
static const struct intel_device_info intel_kabylake_gt3_info = {
KBL_PLATFORM,
+ .gt = 3,
.ring_mask = RENDER_RING | BSD_RING | BLT_RING | VEBOX_RING | BSD2_RING,
};
@@ -434,20 +524,28 @@ static const struct intel_device_info in
.has_guc = 1, \
.ddb_size = 896
-static const struct intel_device_info intel_coffeelake_info = {
+static const struct intel_device_info intel_coffeelake_gt1_info = {
+ CFL_PLATFORM,
+ .gt = 1,
+};
+
+static const struct intel_device_info intel_coffeelake_gt2_info = {
CFL_PLATFORM,
+ .gt = 2,
};
static const struct intel_device_info intel_coffeelake_gt3_info = {
CFL_PLATFORM,
+ .gt = 3,
.ring_mask = RENDER_RING | BSD_RING | BLT_RING | VEBOX_RING | BSD2_RING,
};
-static const struct intel_device_info intel_cannonlake_info = {
+static const struct intel_device_info intel_cannonlake_gt2_info = {
BDW_FEATURES,
.is_alpha_support = 1,
.platform = INTEL_CANNONLAKE,
.gen = 10,
+ .gt = 2,
.ddb_size = 1024,
.has_csr = 1,
.color = { .degamma_lut_size = 0, .gamma_lut_size = 1024 }
@@ -476,31 +574,40 @@ static const struct pci_device_id pciidl
INTEL_PINEVIEW_IDS(&intel_pineview_info),
INTEL_IRONLAKE_D_IDS(&intel_ironlake_d_info),
INTEL_IRONLAKE_M_IDS(&intel_ironlake_m_info),
- INTEL_SNB_D_IDS(&intel_sandybridge_d_info),
- INTEL_SNB_M_IDS(&intel_sandybridge_m_info),
+ INTEL_SNB_D_GT1_IDS(&intel_sandybridge_d_gt1_info),
+ INTEL_SNB_D_GT2_IDS(&intel_sandybridge_d_gt2_info),
+ INTEL_SNB_M_GT1_IDS(&intel_sandybridge_m_gt1_info),
+ INTEL_SNB_M_GT2_IDS(&intel_sandybridge_m_gt2_info),
INTEL_IVB_Q_IDS(&intel_ivybridge_q_info), /* must be first IVB */
- INTEL_IVB_M_IDS(&intel_ivybridge_m_info),
- INTEL_IVB_D_IDS(&intel_ivybridge_d_info),
- INTEL_HSW_IDS(&intel_haswell_info),
+ INTEL_IVB_M_GT1_IDS(&intel_ivybridge_m_gt1_info),
+ INTEL_IVB_M_GT2_IDS(&intel_ivybridge_m_gt2_info),
+ INTEL_IVB_D_GT1_IDS(&intel_ivybridge_d_gt1_info),
+ INTEL_IVB_D_GT2_IDS(&intel_ivybridge_d_gt2_info),
+ INTEL_HSW_GT1_IDS(&intel_haswell_gt1_info),
+ INTEL_HSW_GT2_IDS(&intel_haswell_gt2_info),
+ INTEL_HSW_GT3_IDS(&intel_haswell_gt3_info),
INTEL_VLV_IDS(&intel_valleyview_info),
- INTEL_BDW_GT12_IDS(&intel_broadwell_info),
+ INTEL_BDW_GT1_IDS(&intel_broadwell_gt1_info),
+ INTEL_BDW_GT2_IDS(&intel_broadwell_gt2_info),
INTEL_BDW_GT3_IDS(&intel_broadwell_gt3_info),
- INTEL_BDW_RSVD_IDS(&intel_broadwell_info),
+ INTEL_BDW_RSVD_IDS(&intel_broadwell_rsvd_info),
INTEL_CHV_IDS(&intel_cherryview_info),
- INTEL_SKL_GT1_IDS(&intel_skylake_info),
- INTEL_SKL_GT2_IDS(&intel_skylake_info),
+ INTEL_SKL_GT1_IDS(&intel_skylake_gt1_info),
+ INTEL_SKL_GT2_IDS(&intel_skylake_gt2_info),
INTEL_SKL_GT3_IDS(&intel_skylake_gt3_info),
- INTEL_SKL_GT4_IDS(&intel_skylake_gt3_info),
+ INTEL_SKL_GT4_IDS(&intel_skylake_gt4_info),
INTEL_BXT_IDS(&intel_broxton_info),
INTEL_GLK_IDS(&intel_geminilake_info),
- INTEL_KBL_GT1_IDS(&intel_kabylake_info),
- INTEL_KBL_GT2_IDS(&intel_kabylake_info),
+ INTEL_KBL_GT1_IDS(&intel_kabylake_gt1_info),
+ INTEL_KBL_GT2_IDS(&intel_kabylake_gt2_info),
INTEL_KBL_GT3_IDS(&intel_kabylake_gt3_info),
INTEL_KBL_GT4_IDS(&intel_kabylake_gt3_info),
- INTEL_CFL_S_IDS(&intel_coffeelake_info),
- INTEL_CFL_H_IDS(&intel_coffeelake_info),
- INTEL_CFL_U_IDS(&intel_coffeelake_gt3_info),
- INTEL_CNL_IDS(&intel_cannonlake_info),
+ INTEL_CFL_S_GT1_IDS(&intel_coffeelake_gt1_info),
+ INTEL_CFL_S_GT2_IDS(&intel_coffeelake_gt2_info),
+ INTEL_CFL_H_GT2_IDS(&intel_coffeelake_gt2_info),
+ INTEL_CFL_U_GT3_IDS(&intel_coffeelake_gt3_info),
+ INTEL_CNL_U_GT2_IDS(&intel_cannonlake_gt2_info),
+ INTEL_CNL_Y_GT2_IDS(&intel_cannonlake_gt2_info),
{0, 0, 0}
};
MODULE_DEVICE_TABLE(pci, pciidlist);
--- a/include/drm/i915_pciids.h
+++ b/include/drm/i915_pciids.h
@@ -118,92 +118,125 @@
#define INTEL_IRONLAKE_M_IDS(info) \
INTEL_VGA_DEVICE(0x0046, info)
-#define INTEL_SNB_D_IDS(info) \
+#define INTEL_SNB_D_GT1_IDS(info) \
INTEL_VGA_DEVICE(0x0102, info), \
- INTEL_VGA_DEVICE(0x0112, info), \
- INTEL_VGA_DEVICE(0x0122, info), \
INTEL_VGA_DEVICE(0x010A, info)
-#define INTEL_SNB_M_IDS(info) \
- INTEL_VGA_DEVICE(0x0106, info), \
+#define INTEL_SNB_D_GT2_IDS(info) \
+ INTEL_VGA_DEVICE(0x0112, info), \
+ INTEL_VGA_DEVICE(0x0122, info)
+
+#define INTEL_SNB_D_IDS(info) \
+ INTEL_SNB_D_GT1_IDS(info), \
+ INTEL_SNB_D_GT2_IDS(info)
+
+#define INTEL_SNB_M_GT1_IDS(info) \
+ INTEL_VGA_DEVICE(0x0106, info)
+
+#define INTEL_SNB_M_GT2_IDS(info) \
INTEL_VGA_DEVICE(0x0116, info), \
INTEL_VGA_DEVICE(0x0126, info)
+#define INTEL_SNB_M_IDS(info) \
+ INTEL_SNB_M_GT1_IDS(info), \
+ INTEL_SNB_M_GT2_IDS(info)
+
+#define INTEL_IVB_M_GT1_IDS(info) \
+ INTEL_VGA_DEVICE(0x0156, info) /* GT1 mobile */
+
+#define INTEL_IVB_M_GT2_IDS(info) \
+ INTEL_VGA_DEVICE(0x0166, info) /* GT2 mobile */
+
#define INTEL_IVB_M_IDS(info) \
- INTEL_VGA_DEVICE(0x0156, info), /* GT1 mobile */ \
- INTEL_VGA_DEVICE(0x0166, info) /* GT2 mobile */
+ INTEL_IVB_M_GT1_IDS(info), \
+ INTEL_IVB_M_GT2_IDS(info)
-#define INTEL_IVB_D_IDS(info) \
+#define INTEL_IVB_D_GT1_IDS(info) \
INTEL_VGA_DEVICE(0x0152, info), /* GT1 desktop */ \
+ INTEL_VGA_DEVICE(0x015a, info) /* GT1 server */
+
+#define INTEL_IVB_D_GT2_IDS(info) \
INTEL_VGA_DEVICE(0x0162, info), /* GT2 desktop */ \
- INTEL_VGA_DEVICE(0x015a, info), /* GT1 server */ \
INTEL_VGA_DEVICE(0x016a, info) /* GT2 server */
+#define INTEL_IVB_D_IDS(info) \
+ INTEL_IVB_D_GT1_IDS(info), \
+ INTEL_IVB_D_GT2_IDS(info)
+
#define INTEL_IVB_Q_IDS(info) \
INTEL_QUANTA_VGA_DEVICE(info) /* Quanta transcode */
-#define INTEL_HSW_IDS(info) \
+#define INTEL_HSW_GT1_IDS(info) \
INTEL_VGA_DEVICE(0x0402, info), /* GT1 desktop */ \
- INTEL_VGA_DEVICE(0x0412, info), /* GT2 desktop */ \
- INTEL_VGA_DEVICE(0x0422, info), /* GT3 desktop */ \
INTEL_VGA_DEVICE(0x040a, info), /* GT1 server */ \
- INTEL_VGA_DEVICE(0x041a, info), /* GT2 server */ \
- INTEL_VGA_DEVICE(0x042a, info), /* GT3 server */ \
INTEL_VGA_DEVICE(0x040B, info), /* GT1 reserved */ \
- INTEL_VGA_DEVICE(0x041B, info), /* GT2 reserved */ \
- INTEL_VGA_DEVICE(0x042B, info), /* GT3 reserved */ \
INTEL_VGA_DEVICE(0x040E, info), /* GT1 reserved */ \
- INTEL_VGA_DEVICE(0x041E, info), /* GT2 reserved */ \
- INTEL_VGA_DEVICE(0x042E, info), /* GT3 reserved */ \
INTEL_VGA_DEVICE(0x0C02, info), /* SDV GT1 desktop */ \
- INTEL_VGA_DEVICE(0x0C12, info), /* SDV GT2 desktop */ \
- INTEL_VGA_DEVICE(0x0C22, info), /* SDV GT3 desktop */ \
INTEL_VGA_DEVICE(0x0C0A, info), /* SDV GT1 server */ \
- INTEL_VGA_DEVICE(0x0C1A, info), /* SDV GT2 server */ \
- INTEL_VGA_DEVICE(0x0C2A, info), /* SDV GT3 server */ \
INTEL_VGA_DEVICE(0x0C0B, info), /* SDV GT1 reserved */ \
- INTEL_VGA_DEVICE(0x0C1B, info), /* SDV GT2 reserved */ \
- INTEL_VGA_DEVICE(0x0C2B, info), /* SDV GT3 reserved */ \
INTEL_VGA_DEVICE(0x0C0E, info), /* SDV GT1 reserved */ \
- INTEL_VGA_DEVICE(0x0C1E, info), /* SDV GT2 reserved */ \
- INTEL_VGA_DEVICE(0x0C2E, info), /* SDV GT3 reserved */ \
INTEL_VGA_DEVICE(0x0A02, info), /* ULT GT1 desktop */ \
- INTEL_VGA_DEVICE(0x0A12, info), /* ULT GT2 desktop */ \
- INTEL_VGA_DEVICE(0x0A22, info), /* ULT GT3 desktop */ \
INTEL_VGA_DEVICE(0x0A0A, info), /* ULT GT1 server */ \
- INTEL_VGA_DEVICE(0x0A1A, info), /* ULT GT2 server */ \
- INTEL_VGA_DEVICE(0x0A2A, info), /* ULT GT3 server */ \
INTEL_VGA_DEVICE(0x0A0B, info), /* ULT GT1 reserved */ \
- INTEL_VGA_DEVICE(0x0A1B, info), /* ULT GT2 reserved */ \
- INTEL_VGA_DEVICE(0x0A2B, info), /* ULT GT3 reserved */ \
INTEL_VGA_DEVICE(0x0D02, info), /* CRW GT1 desktop */ \
- INTEL_VGA_DEVICE(0x0D12, info), /* CRW GT2 desktop */ \
- INTEL_VGA_DEVICE(0x0D22, info), /* CRW GT3 desktop */ \
INTEL_VGA_DEVICE(0x0D0A, info), /* CRW GT1 server */ \
- INTEL_VGA_DEVICE(0x0D1A, info), /* CRW GT2 server */ \
- INTEL_VGA_DEVICE(0x0D2A, info), /* CRW GT3 server */ \
INTEL_VGA_DEVICE(0x0D0B, info), /* CRW GT1 reserved */ \
- INTEL_VGA_DEVICE(0x0D1B, info), /* CRW GT2 reserved */ \
- INTEL_VGA_DEVICE(0x0D2B, info), /* CRW GT3 reserved */ \
INTEL_VGA_DEVICE(0x0D0E, info), /* CRW GT1 reserved */ \
- INTEL_VGA_DEVICE(0x0D1E, info), /* CRW GT2 reserved */ \
- INTEL_VGA_DEVICE(0x0D2E, info), /* CRW GT3 reserved */ \
INTEL_VGA_DEVICE(0x0406, info), /* GT1 mobile */ \
+ INTEL_VGA_DEVICE(0x0C06, info), /* SDV GT1 mobile */ \
+ INTEL_VGA_DEVICE(0x0A06, info), /* ULT GT1 mobile */ \
+ INTEL_VGA_DEVICE(0x0A0E, info), /* ULX GT1 mobile */ \
+ INTEL_VGA_DEVICE(0x0D06, info) /* CRW GT1 mobile */
+
+#define INTEL_HSW_GT2_IDS(info) \
+ INTEL_VGA_DEVICE(0x0412, info), /* GT2 desktop */ \
+ INTEL_VGA_DEVICE(0x041a, info), /* GT2 server */ \
+ INTEL_VGA_DEVICE(0x041B, info), /* GT2 reserved */ \
+ INTEL_VGA_DEVICE(0x041E, info), /* GT2 reserved */ \
+ INTEL_VGA_DEVICE(0x0C12, info), /* SDV GT2 desktop */ \
+ INTEL_VGA_DEVICE(0x0C1A, info), /* SDV GT2 server */ \
+ INTEL_VGA_DEVICE(0x0C1B, info), /* SDV GT2 reserved */ \
+ INTEL_VGA_DEVICE(0x0C1E, info), /* SDV GT2 reserved */ \
+ INTEL_VGA_DEVICE(0x0A12, info), /* ULT GT2 desktop */ \
+ INTEL_VGA_DEVICE(0x0A1A, info), /* ULT GT2 server */ \
+ INTEL_VGA_DEVICE(0x0A1B, info), /* ULT GT2 reserved */ \
+ INTEL_VGA_DEVICE(0x0D12, info), /* CRW GT2 desktop */ \
+ INTEL_VGA_DEVICE(0x0D1A, info), /* CRW GT2 server */ \
+ INTEL_VGA_DEVICE(0x0D1B, info), /* CRW GT2 reserved */ \
+ INTEL_VGA_DEVICE(0x0D1E, info), /* CRW GT2 reserved */ \
INTEL_VGA_DEVICE(0x0416, info), /* GT2 mobile */ \
INTEL_VGA_DEVICE(0x0426, info), /* GT2 mobile */ \
- INTEL_VGA_DEVICE(0x0C06, info), /* SDV GT1 mobile */ \
INTEL_VGA_DEVICE(0x0C16, info), /* SDV GT2 mobile */ \
- INTEL_VGA_DEVICE(0x0C26, info), /* SDV GT3 mobile */ \
- INTEL_VGA_DEVICE(0x0A06, info), /* ULT GT1 mobile */ \
INTEL_VGA_DEVICE(0x0A16, info), /* ULT GT2 mobile */ \
- INTEL_VGA_DEVICE(0x0A26, info), /* ULT GT3 mobile */ \
- INTEL_VGA_DEVICE(0x0A0E, info), /* ULX GT1 mobile */ \
INTEL_VGA_DEVICE(0x0A1E, info), /* ULX GT2 mobile */ \
+ INTEL_VGA_DEVICE(0x0D16, info) /* CRW GT2 mobile */
+
+#define INTEL_HSW_GT3_IDS(info) \
+ INTEL_VGA_DEVICE(0x0422, info), /* GT3 desktop */ \
+ INTEL_VGA_DEVICE(0x042a, info), /* GT3 server */ \
+ INTEL_VGA_DEVICE(0x042B, info), /* GT3 reserved */ \
+ INTEL_VGA_DEVICE(0x042E, info), /* GT3 reserved */ \
+ INTEL_VGA_DEVICE(0x0C22, info), /* SDV GT3 desktop */ \
+ INTEL_VGA_DEVICE(0x0C2A, info), /* SDV GT3 server */ \
+ INTEL_VGA_DEVICE(0x0C2B, info), /* SDV GT3 reserved */ \
+ INTEL_VGA_DEVICE(0x0C2E, info), /* SDV GT3 reserved */ \
+ INTEL_VGA_DEVICE(0x0A22, info), /* ULT GT3 desktop */ \
+ INTEL_VGA_DEVICE(0x0A2A, info), /* ULT GT3 server */ \
+ INTEL_VGA_DEVICE(0x0A2B, info), /* ULT GT3 reserved */ \
+ INTEL_VGA_DEVICE(0x0D22, info), /* CRW GT3 desktop */ \
+ INTEL_VGA_DEVICE(0x0D2A, info), /* CRW GT3 server */ \
+ INTEL_VGA_DEVICE(0x0D2B, info), /* CRW GT3 reserved */ \
+ INTEL_VGA_DEVICE(0x0D2E, info), /* CRW GT3 reserved */ \
+ INTEL_VGA_DEVICE(0x0C26, info), /* SDV GT3 mobile */ \
+ INTEL_VGA_DEVICE(0x0A26, info), /* ULT GT3 mobile */ \
INTEL_VGA_DEVICE(0x0A2E, info), /* ULT GT3 reserved */ \
- INTEL_VGA_DEVICE(0x0D06, info), /* CRW GT1 mobile */ \
- INTEL_VGA_DEVICE(0x0D16, info), /* CRW GT2 mobile */ \
INTEL_VGA_DEVICE(0x0D26, info) /* CRW GT3 mobile */
+#define INTEL_HSW_IDS(info) \
+ INTEL_HSW_GT1_IDS(info), \
+ INTEL_HSW_GT2_IDS(info), \
+ INTEL_HSW_GT3_IDS(info)
+
#define INTEL_VLV_IDS(info) \
INTEL_VGA_DEVICE(0x0f30, info), \
INTEL_VGA_DEVICE(0x0f31, info), \
@@ -212,17 +245,19 @@
INTEL_VGA_DEVICE(0x0157, info), \
INTEL_VGA_DEVICE(0x0155, info)
-#define INTEL_BDW_GT12_IDS(info) \
+#define INTEL_BDW_GT1_IDS(info) \
INTEL_VGA_DEVICE(0x1602, info), /* GT1 ULT */ \
INTEL_VGA_DEVICE(0x1606, info), /* GT1 ULT */ \
INTEL_VGA_DEVICE(0x160B, info), /* GT1 Iris */ \
INTEL_VGA_DEVICE(0x160E, info), /* GT1 ULX */ \
- INTEL_VGA_DEVICE(0x1612, info), /* GT2 Halo */ \
+ INTEL_VGA_DEVICE(0x160A, info), /* GT1 Server */ \
+ INTEL_VGA_DEVICE(0x160D, info) /* GT1 Workstation */
+
+#define INTEL_BDW_GT2_IDS(info) \
+ INTEL_VGA_DEVICE(0x1612, info), /* GT2 Halo */ \
INTEL_VGA_DEVICE(0x1616, info), /* GT2 ULT */ \
INTEL_VGA_DEVICE(0x161B, info), /* GT2 ULT */ \
- INTEL_VGA_DEVICE(0x161E, info), /* GT2 ULX */ \
- INTEL_VGA_DEVICE(0x160A, info), /* GT1 Server */ \
- INTEL_VGA_DEVICE(0x160D, info), /* GT1 Workstation */ \
+ INTEL_VGA_DEVICE(0x161E, info), /* GT2 ULX */ \
INTEL_VGA_DEVICE(0x161A, info), /* GT2 Server */ \
INTEL_VGA_DEVICE(0x161D, info) /* GT2 Workstation */
@@ -243,7 +278,8 @@
INTEL_VGA_DEVICE(0x163D, info) /* Workstation */
#define INTEL_BDW_IDS(info) \
- INTEL_BDW_GT12_IDS(info), \
+ INTEL_BDW_GT1_IDS(info), \
+ INTEL_BDW_GT2_IDS(info), \
INTEL_BDW_GT3_IDS(info), \
INTEL_BDW_RSVD_IDS(info)
@@ -335,20 +371,22 @@
INTEL_KBL_GT4_IDS(info)
/* CFL S */
-#define INTEL_CFL_S_IDS(info) \
+#define INTEL_CFL_S_GT1_IDS(info) \
INTEL_VGA_DEVICE(0x3E90, info), /* SRV GT1 */ \
- INTEL_VGA_DEVICE(0x3E93, info), /* SRV GT1 */ \
+ INTEL_VGA_DEVICE(0x3E93, info) /* SRV GT1 */
+
+#define INTEL_CFL_S_GT2_IDS(info) \
INTEL_VGA_DEVICE(0x3E91, info), /* SRV GT2 */ \
INTEL_VGA_DEVICE(0x3E92, info), /* SRV GT2 */ \
INTEL_VGA_DEVICE(0x3E96, info) /* SRV GT2 */
/* CFL H */
-#define INTEL_CFL_H_IDS(info) \
+#define INTEL_CFL_H_GT2_IDS(info) \
INTEL_VGA_DEVICE(0x3E9B, info), /* Halo GT2 */ \
INTEL_VGA_DEVICE(0x3E94, info) /* Halo GT2 */
/* CFL U */
-#define INTEL_CFL_U_IDS(info) \
+#define INTEL_CFL_U_GT3_IDS(info) \
INTEL_VGA_DEVICE(0x3EA6, info), /* ULT GT3 */ \
INTEL_VGA_DEVICE(0x3EA7, info), /* ULT GT3 */ \
INTEL_VGA_DEVICE(0x3EA8, info), /* ULT GT3 */ \
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Viresh Kumar <[email protected]>
commit 6ffb5b4f248fe53e0361b8cbc2a523b432566442 upstream.
The interrupt-parent of rtc was missing, add it.
Fixes: 8113ba917dfa ("ARM: SPEAr: DT: Update device nodes")
Cc: [email protected] # v3.8+
Reported-by: Arnd Bergmann <[email protected]>
Signed-off-by: Viresh Kumar <[email protected]>
Signed-off-by: Olof Johansson <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/arm/boot/dts/spear600.dtsi | 1 +
1 file changed, 1 insertion(+)
--- a/arch/arm/boot/dts/spear600.dtsi
+++ b/arch/arm/boot/dts/spear600.dtsi
@@ -194,6 +194,7 @@
rtc: rtc@fc900000 {
compatible = "st,spear600-rtc";
reg = <0xfc900000 0x1000>;
+ interrupt-parent = <&vic0>;
interrupts = <10>;
status = "disabled";
};
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Levin, Alexander (Sasha Levin) <[email protected]>
commit 75f296d93bcebcfe375884ddac79e30263a31766 upstream.
Convert all allocations that used a NOTRACK flag to stop using it.
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
Cc: Alexander Potapenko <[email protected]>
Cc: Eric W. Biederman <[email protected]>
Cc: Michal Hocko <[email protected]>
Cc: Pekka Enberg <[email protected]>
Cc: Steven Rostedt <[email protected]>
Cc: Tim Hansen <[email protected]>
Cc: Vegard Nossum <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/arm/include/asm/pgalloc.h | 2 +-
arch/arm64/include/asm/pgalloc.h | 2 +-
arch/powerpc/include/asm/pgalloc.h | 2 +-
arch/sh/kernel/dwarf.c | 4 ++--
arch/sh/kernel/process.c | 2 +-
arch/sparc/mm/init_64.c | 4 ++--
arch/unicore32/include/asm/pgalloc.h | 2 +-
arch/x86/kernel/espfix_64.c | 2 +-
arch/x86/mm/init.c | 3 +--
arch/x86/mm/init_64.c | 2 +-
arch/x86/mm/pageattr.c | 10 +++++-----
arch/x86/mm/pgtable.c | 2 +-
arch/x86/platform/efi/efi_64.c | 2 +-
crypto/xor.c | 7 +------
include/linux/thread_info.h | 5 ++---
init/do_mounts.c | 3 +--
kernel/fork.c | 12 ++++++------
kernel/signal.c | 3 +--
mm/kmemcheck.c | 2 +-
mm/slab.c | 2 +-
mm/slab.h | 5 ++---
mm/slab_common.c | 2 +-
mm/slub.c | 4 +---
23 files changed, 36 insertions(+), 48 deletions(-)
--- a/arch/arm/include/asm/pgalloc.h
+++ b/arch/arm/include/asm/pgalloc.h
@@ -57,7 +57,7 @@ static inline void pud_populate(struct m
extern pgd_t *pgd_alloc(struct mm_struct *mm);
extern void pgd_free(struct mm_struct *mm, pgd_t *pgd);
-#define PGALLOC_GFP (GFP_KERNEL | __GFP_NOTRACK | __GFP_ZERO)
+#define PGALLOC_GFP (GFP_KERNEL | __GFP_ZERO)
static inline void clean_pte_table(pte_t *pte)
{
--- a/arch/arm64/include/asm/pgalloc.h
+++ b/arch/arm64/include/asm/pgalloc.h
@@ -26,7 +26,7 @@
#define check_pgt_cache() do { } while (0)
-#define PGALLOC_GFP (GFP_KERNEL | __GFP_NOTRACK | __GFP_ZERO)
+#define PGALLOC_GFP (GFP_KERNEL | __GFP_ZERO)
#define PGD_SIZE (PTRS_PER_PGD * sizeof(pgd_t))
#if CONFIG_PGTABLE_LEVELS > 2
--- a/arch/powerpc/include/asm/pgalloc.h
+++ b/arch/powerpc/include/asm/pgalloc.h
@@ -18,7 +18,7 @@ static inline gfp_t pgtable_gfp_flags(st
}
#endif /* MODULE */
-#define PGALLOC_GFP (GFP_KERNEL | __GFP_NOTRACK | __GFP_ZERO)
+#define PGALLOC_GFP (GFP_KERNEL | __GFP_ZERO)
#ifdef CONFIG_PPC_BOOK3S
#include <asm/book3s/pgalloc.h>
--- a/arch/sh/kernel/dwarf.c
+++ b/arch/sh/kernel/dwarf.c
@@ -1172,11 +1172,11 @@ static int __init dwarf_unwinder_init(vo
dwarf_frame_cachep = kmem_cache_create("dwarf_frames",
sizeof(struct dwarf_frame), 0,
- SLAB_PANIC | SLAB_HWCACHE_ALIGN | SLAB_NOTRACK, NULL);
+ SLAB_PANIC | SLAB_HWCACHE_ALIGN, NULL);
dwarf_reg_cachep = kmem_cache_create("dwarf_regs",
sizeof(struct dwarf_reg), 0,
- SLAB_PANIC | SLAB_HWCACHE_ALIGN | SLAB_NOTRACK, NULL);
+ SLAB_PANIC | SLAB_HWCACHE_ALIGN, NULL);
dwarf_frame_pool = mempool_create_slab_pool(DWARF_FRAME_MIN_REQ,
dwarf_frame_cachep);
--- a/arch/sh/kernel/process.c
+++ b/arch/sh/kernel/process.c
@@ -59,7 +59,7 @@ void arch_task_cache_init(void)
task_xstate_cachep = kmem_cache_create("task_xstate", xstate_size,
__alignof__(union thread_xstate),
- SLAB_PANIC | SLAB_NOTRACK, NULL);
+ SLAB_PANIC, NULL);
}
#ifdef CONFIG_SH_FPU_EMU
--- a/arch/sparc/mm/init_64.c
+++ b/arch/sparc/mm/init_64.c
@@ -2934,7 +2934,7 @@ void __flush_tlb_all(void)
pte_t *pte_alloc_one_kernel(struct mm_struct *mm,
unsigned long address)
{
- struct page *page = alloc_page(GFP_KERNEL | __GFP_NOTRACK | __GFP_ZERO);
+ struct page *page = alloc_page(GFP_KERNEL | __GFP_ZERO);
pte_t *pte = NULL;
if (page)
@@ -2946,7 +2946,7 @@ pte_t *pte_alloc_one_kernel(struct mm_st
pgtable_t pte_alloc_one(struct mm_struct *mm,
unsigned long address)
{
- struct page *page = alloc_page(GFP_KERNEL | __GFP_NOTRACK | __GFP_ZERO);
+ struct page *page = alloc_page(GFP_KERNEL | __GFP_ZERO);
if (!page)
return NULL;
if (!pgtable_page_ctor(page)) {
--- a/arch/unicore32/include/asm/pgalloc.h
+++ b/arch/unicore32/include/asm/pgalloc.h
@@ -28,7 +28,7 @@ extern void free_pgd_slow(struct mm_stru
#define pgd_alloc(mm) get_pgd_slow(mm)
#define pgd_free(mm, pgd) free_pgd_slow(mm, pgd)
-#define PGALLOC_GFP (GFP_KERNEL | __GFP_NOTRACK | __GFP_ZERO)
+#define PGALLOC_GFP (GFP_KERNEL | __GFP_ZERO)
/*
* Allocate one PTE table.
--- a/arch/x86/kernel/espfix_64.c
+++ b/arch/x86/kernel/espfix_64.c
@@ -57,7 +57,7 @@
# error "Need more virtual address space for the ESPFIX hack"
#endif
-#define PGALLOC_GFP (GFP_KERNEL | __GFP_NOTRACK | __GFP_ZERO)
+#define PGALLOC_GFP (GFP_KERNEL | __GFP_ZERO)
/* This contains the *bottom* address of the espfix stack */
DEFINE_PER_CPU_READ_MOSTLY(unsigned long, espfix_stack);
--- a/arch/x86/mm/init.c
+++ b/arch/x86/mm/init.c
@@ -93,8 +93,7 @@ __ref void *alloc_low_pages(unsigned int
unsigned int order;
order = get_order((unsigned long)num << PAGE_SHIFT);
- return (void *)__get_free_pages(GFP_ATOMIC | __GFP_NOTRACK |
- __GFP_ZERO, order);
+ return (void *)__get_free_pages(GFP_ATOMIC | __GFP_ZERO, order);
}
if ((pgt_buf_end + num) > pgt_buf_top || !can_use_brk_pgt) {
--- a/arch/x86/mm/init_64.c
+++ b/arch/x86/mm/init_64.c
@@ -184,7 +184,7 @@ static __ref void *spp_getpage(void)
void *ptr;
if (after_bootmem)
- ptr = (void *) get_zeroed_page(GFP_ATOMIC | __GFP_NOTRACK);
+ ptr = (void *) get_zeroed_page(GFP_ATOMIC);
else
ptr = alloc_bootmem_pages(PAGE_SIZE);
--- a/arch/x86/mm/pageattr.c
+++ b/arch/x86/mm/pageattr.c
@@ -753,7 +753,7 @@ static int split_large_page(struct cpa_d
if (!debug_pagealloc_enabled())
spin_unlock(&cpa_lock);
- base = alloc_pages(GFP_KERNEL | __GFP_NOTRACK, 0);
+ base = alloc_pages(GFP_KERNEL, 0);
if (!debug_pagealloc_enabled())
spin_lock(&cpa_lock);
if (!base)
@@ -904,7 +904,7 @@ static void unmap_pud_range(p4d_t *p4d,
static int alloc_pte_page(pmd_t *pmd)
{
- pte_t *pte = (pte_t *)get_zeroed_page(GFP_KERNEL | __GFP_NOTRACK);
+ pte_t *pte = (pte_t *)get_zeroed_page(GFP_KERNEL);
if (!pte)
return -1;
@@ -914,7 +914,7 @@ static int alloc_pte_page(pmd_t *pmd)
static int alloc_pmd_page(pud_t *pud)
{
- pmd_t *pmd = (pmd_t *)get_zeroed_page(GFP_KERNEL | __GFP_NOTRACK);
+ pmd_t *pmd = (pmd_t *)get_zeroed_page(GFP_KERNEL);
if (!pmd)
return -1;
@@ -1120,7 +1120,7 @@ static int populate_pgd(struct cpa_data
pgd_entry = cpa->pgd + pgd_index(addr);
if (pgd_none(*pgd_entry)) {
- p4d = (p4d_t *)get_zeroed_page(GFP_KERNEL | __GFP_NOTRACK);
+ p4d = (p4d_t *)get_zeroed_page(GFP_KERNEL);
if (!p4d)
return -1;
@@ -1132,7 +1132,7 @@ static int populate_pgd(struct cpa_data
*/
p4d = p4d_offset(pgd_entry, addr);
if (p4d_none(*p4d)) {
- pud = (pud_t *)get_zeroed_page(GFP_KERNEL | __GFP_NOTRACK);
+ pud = (pud_t *)get_zeroed_page(GFP_KERNEL);
if (!pud)
return -1;
--- a/arch/x86/mm/pgtable.c
+++ b/arch/x86/mm/pgtable.c
@@ -7,7 +7,7 @@
#include <asm/fixmap.h>
#include <asm/mtrr.h>
-#define PGALLOC_GFP (GFP_KERNEL_ACCOUNT | __GFP_NOTRACK | __GFP_ZERO)
+#define PGALLOC_GFP (GFP_KERNEL_ACCOUNT | __GFP_ZERO)
#ifdef CONFIG_HIGHPTE
#define PGALLOC_USER_GFP __GFP_HIGHMEM
--- a/arch/x86/platform/efi/efi_64.c
+++ b/arch/x86/platform/efi/efi_64.c
@@ -211,7 +211,7 @@ int __init efi_alloc_page_tables(void)
if (efi_enabled(EFI_OLD_MEMMAP))
return 0;
- gfp_mask = GFP_KERNEL | __GFP_NOTRACK | __GFP_ZERO;
+ gfp_mask = GFP_KERNEL | __GFP_ZERO;
efi_pgd = (pgd_t *)__get_free_pages(gfp_mask, PGD_ALLOCATION_ORDER);
if (!efi_pgd)
return -ENOMEM;
--- a/crypto/xor.c
+++ b/crypto/xor.c
@@ -122,12 +122,7 @@ calibrate_xor_blocks(void)
goto out;
}
- /*
- * Note: Since the memory is not actually used for _anything_ but to
- * test the XOR speed, we don't really want kmemcheck to warn about
- * reading uninitialized bytes here.
- */
- b1 = (void *) __get_free_pages(GFP_KERNEL | __GFP_NOTRACK, 2);
+ b1 = (void *) __get_free_pages(GFP_KERNEL, 2);
if (!b1) {
printk(KERN_WARNING "xor: Yikes! No memory available.\n");
return -ENOMEM;
--- a/include/linux/thread_info.h
+++ b/include/linux/thread_info.h
@@ -44,10 +44,9 @@ enum {
#endif
#if IS_ENABLED(CONFIG_DEBUG_STACK_USAGE) || IS_ENABLED(CONFIG_DEBUG_KMEMLEAK)
-# define THREADINFO_GFP (GFP_KERNEL_ACCOUNT | __GFP_NOTRACK | \
- __GFP_ZERO)
+# define THREADINFO_GFP (GFP_KERNEL_ACCOUNT | __GFP_ZERO)
#else
-# define THREADINFO_GFP (GFP_KERNEL_ACCOUNT | __GFP_NOTRACK)
+# define THREADINFO_GFP (GFP_KERNEL_ACCOUNT)
#endif
/*
--- a/init/do_mounts.c
+++ b/init/do_mounts.c
@@ -380,8 +380,7 @@ static int __init do_mount_root(char *na
void __init mount_block_root(char *name, int flags)
{
- struct page *page = alloc_page(GFP_KERNEL |
- __GFP_NOTRACK_FALSE_POSITIVE);
+ struct page *page = alloc_page(GFP_KERNEL);
char *fs_names = page_address(page);
char *p;
#ifdef CONFIG_BLOCK
--- a/kernel/fork.c
+++ b/kernel/fork.c
@@ -469,7 +469,7 @@ void __init fork_init(void)
/* create a slab on which task_structs can be allocated */
task_struct_cachep = kmem_cache_create("task_struct",
arch_task_struct_size, align,
- SLAB_PANIC|SLAB_NOTRACK|SLAB_ACCOUNT, NULL);
+ SLAB_PANIC|SLAB_ACCOUNT, NULL);
#endif
/* do the arch specific task caches init */
@@ -2208,18 +2208,18 @@ void __init proc_caches_init(void)
sighand_cachep = kmem_cache_create("sighand_cache",
sizeof(struct sighand_struct), 0,
SLAB_HWCACHE_ALIGN|SLAB_PANIC|SLAB_TYPESAFE_BY_RCU|
- SLAB_NOTRACK|SLAB_ACCOUNT, sighand_ctor);
+ SLAB_ACCOUNT, sighand_ctor);
signal_cachep = kmem_cache_create("signal_cache",
sizeof(struct signal_struct), 0,
- SLAB_HWCACHE_ALIGN|SLAB_PANIC|SLAB_NOTRACK|SLAB_ACCOUNT,
+ SLAB_HWCACHE_ALIGN|SLAB_PANIC|SLAB_ACCOUNT,
NULL);
files_cachep = kmem_cache_create("files_cache",
sizeof(struct files_struct), 0,
- SLAB_HWCACHE_ALIGN|SLAB_PANIC|SLAB_NOTRACK|SLAB_ACCOUNT,
+ SLAB_HWCACHE_ALIGN|SLAB_PANIC|SLAB_ACCOUNT,
NULL);
fs_cachep = kmem_cache_create("fs_cache",
sizeof(struct fs_struct), 0,
- SLAB_HWCACHE_ALIGN|SLAB_PANIC|SLAB_NOTRACK|SLAB_ACCOUNT,
+ SLAB_HWCACHE_ALIGN|SLAB_PANIC|SLAB_ACCOUNT,
NULL);
/*
* FIXME! The "sizeof(struct mm_struct)" currently includes the
@@ -2230,7 +2230,7 @@ void __init proc_caches_init(void)
*/
mm_cachep = kmem_cache_create("mm_struct",
sizeof(struct mm_struct), ARCH_MIN_MMSTRUCT_ALIGN,
- SLAB_HWCACHE_ALIGN|SLAB_PANIC|SLAB_NOTRACK|SLAB_ACCOUNT,
+ SLAB_HWCACHE_ALIGN|SLAB_PANIC|SLAB_ACCOUNT,
NULL);
vm_area_cachep = KMEM_CACHE(vm_area_struct, SLAB_PANIC|SLAB_ACCOUNT);
mmap_init();
--- a/kernel/signal.c
+++ b/kernel/signal.c
@@ -1038,8 +1038,7 @@ static int __send_signal(int sig, struct
else
override_rlimit = 0;
- q = __sigqueue_alloc(sig, t, GFP_ATOMIC | __GFP_NOTRACK_FALSE_POSITIVE,
- override_rlimit);
+ q = __sigqueue_alloc(sig, t, GFP_ATOMIC, override_rlimit);
if (q) {
list_add_tail(&q->list, &pending->list);
switch ((unsigned long) info) {
--- a/mm/kmemcheck.c
+++ b/mm/kmemcheck.c
@@ -18,7 +18,7 @@ void kmemcheck_alloc_shadow(struct page
* With kmemcheck enabled, we need to allocate a memory area for the
* shadow bits as well.
*/
- shadow = alloc_pages_node(node, flags | __GFP_NOTRACK, order);
+ shadow = alloc_pages_node(node, flags, order);
if (!shadow) {
if (printk_ratelimit())
pr_err("kmemcheck: failed to allocate shadow bitmap\n");
--- a/mm/slab.c
+++ b/mm/slab.c
@@ -1412,7 +1412,7 @@ static struct page *kmem_getpages(struct
if (cachep->flags & SLAB_RECLAIM_ACCOUNT)
flags |= __GFP_RECLAIMABLE;
- page = __alloc_pages_node(nodeid, flags | __GFP_NOTRACK, cachep->gfporder);
+ page = __alloc_pages_node(nodeid, flags, cachep->gfporder);
if (!page) {
slab_out_of_memory(cachep, flags, nodeid);
return NULL;
--- a/mm/slab.h
+++ b/mm/slab.h
@@ -141,10 +141,10 @@ static inline unsigned long kmem_cache_f
#if defined(CONFIG_SLAB)
#define SLAB_CACHE_FLAGS (SLAB_MEM_SPREAD | SLAB_NOLEAKTRACE | \
SLAB_RECLAIM_ACCOUNT | SLAB_TEMPORARY | \
- SLAB_NOTRACK | SLAB_ACCOUNT)
+ SLAB_ACCOUNT)
#elif defined(CONFIG_SLUB)
#define SLAB_CACHE_FLAGS (SLAB_NOLEAKTRACE | SLAB_RECLAIM_ACCOUNT | \
- SLAB_TEMPORARY | SLAB_NOTRACK | SLAB_ACCOUNT)
+ SLAB_TEMPORARY | SLAB_ACCOUNT)
#else
#define SLAB_CACHE_FLAGS (0)
#endif
@@ -163,7 +163,6 @@ static inline unsigned long kmem_cache_f
SLAB_NOLEAKTRACE | \
SLAB_RECLAIM_ACCOUNT | \
SLAB_TEMPORARY | \
- SLAB_NOTRACK | \
SLAB_ACCOUNT)
int __kmem_cache_shutdown(struct kmem_cache *);
--- a/mm/slab_common.c
+++ b/mm/slab_common.c
@@ -44,7 +44,7 @@ static DECLARE_WORK(slab_caches_to_rcu_d
SLAB_FAILSLAB | SLAB_KASAN)
#define SLAB_MERGE_SAME (SLAB_RECLAIM_ACCOUNT | SLAB_CACHE_DMA | \
- SLAB_NOTRACK | SLAB_ACCOUNT)
+ SLAB_ACCOUNT)
/*
* Merge control. If this is set then no merging of slab caches will occur.
--- a/mm/slub.c
+++ b/mm/slub.c
@@ -1434,8 +1434,6 @@ static inline struct page *alloc_slab_pa
struct page *page;
int order = oo_order(oo);
- flags |= __GFP_NOTRACK;
-
if (node == NUMA_NO_NODE)
page = alloc_pages(flags, order);
else
@@ -3772,7 +3770,7 @@ static void *kmalloc_large_node(size_t s
struct page *page;
void *ptr = NULL;
- flags |= __GFP_COMP | __GFP_NOTRACK;
+ flags |= __GFP_COMP;
page = alloc_pages_node(node, flags, get_order(size));
if (page)
ptr = page_address(page);
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Levin, Alexander (Sasha Levin) <[email protected]>
commit 4675ff05de2d76d167336b368bd07f3fef6ed5a6 upstream.
Fix up makefiles, remove references, and git rm kmemcheck.
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
Cc: Steven Rostedt <[email protected]>
Cc: Vegard Nossum <[email protected]>
Cc: Pekka Enberg <[email protected]>
Cc: Michal Hocko <[email protected]>
Cc: Eric W. Biederman <[email protected]>
Cc: Alexander Potapenko <[email protected]>
Cc: Tim Hansen <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
Documentation/admin-guide/kernel-parameters.txt | 7
Documentation/dev-tools/index.rst | 1
Documentation/dev-tools/kmemcheck.rst | 733 ------------------------
MAINTAINERS | 10
arch/x86/Kconfig | 3
arch/x86/include/asm/kmemcheck.h | 42 -
arch/x86/include/asm/string_32.h | 9
arch/x86/include/asm/string_64.h | 8
arch/x86/kernel/cpu/intel.c | 15
arch/x86/mm/Makefile | 2
arch/x86/mm/init.c | 5
arch/x86/mm/kmemcheck/Makefile | 1
arch/x86/mm/kmemcheck/error.c | 227 -------
arch/x86/mm/kmemcheck/error.h | 15
arch/x86/mm/kmemcheck/kmemcheck.c | 658 ---------------------
arch/x86/mm/kmemcheck/opcode.c | 106 ---
arch/x86/mm/kmemcheck/opcode.h | 9
arch/x86/mm/kmemcheck/pte.c | 22
arch/x86/mm/kmemcheck/pte.h | 10
arch/x86/mm/kmemcheck/selftest.c | 70 --
arch/x86/mm/kmemcheck/selftest.h | 6
arch/x86/mm/kmemcheck/shadow.c | 173 -----
arch/x86/mm/kmemcheck/shadow.h | 18
include/linux/interrupt.h | 15
include/linux/kmemcheck.h | 171 -----
kernel/softirq.c | 10
kernel/sysctl.c | 10
lib/Kconfig.debug | 6
lib/Kconfig.kmemcheck | 94 ---
mm/Kconfig.debug | 1
mm/Makefile | 2
mm/kmemcheck.c | 125 ----
mm/slub.c | 5
scripts/kernel-doc | 2
tools/include/linux/kmemcheck.h | 8
35 files changed, 7 insertions(+), 2592 deletions(-)
--- a/Documentation/admin-guide/kernel-parameters.txt
+++ b/Documentation/admin-guide/kernel-parameters.txt
@@ -1841,13 +1841,6 @@
Built with CONFIG_DEBUG_KMEMLEAK_DEFAULT_OFF=y,
the default is off.
- kmemcheck= [X86] Boot-time kmemcheck enable/disable/one-shot mode
- Valid arguments: 0, 1, 2
- kmemcheck=0 (disabled)
- kmemcheck=1 (enabled)
- kmemcheck=2 (one-shot mode)
- Default: 2 (one-shot mode)
-
kvm.ignore_msrs=[KVM] Ignore guest accesses to unhandled MSRs.
Default is 0 (don't ignore, but inject #GP)
--- a/Documentation/dev-tools/index.rst
+++ b/Documentation/dev-tools/index.rst
@@ -21,7 +21,6 @@ whole; patches welcome!
kasan
ubsan
kmemleak
- kmemcheck
gdb-kernel-debugging
kgdb
kselftest
--- a/Documentation/dev-tools/kmemcheck.rst
+++ /dev/null
@@ -1,733 +0,0 @@
-Getting started with kmemcheck
-==============================
-
-Vegard Nossum <[email protected]>
-
-
-Introduction
-------------
-
-kmemcheck is a debugging feature for the Linux Kernel. More specifically, it
-is a dynamic checker that detects and warns about some uses of uninitialized
-memory.
-
-Userspace programmers might be familiar with Valgrind's memcheck. The main
-difference between memcheck and kmemcheck is that memcheck works for userspace
-programs only, and kmemcheck works for the kernel only. The implementations
-are of course vastly different. Because of this, kmemcheck is not as accurate
-as memcheck, but it turns out to be good enough in practice to discover real
-programmer errors that the compiler is not able to find through static
-analysis.
-
-Enabling kmemcheck on a kernel will probably slow it down to the extent that
-the machine will not be usable for normal workloads such as e.g. an
-interactive desktop. kmemcheck will also cause the kernel to use about twice
-as much memory as normal. For this reason, kmemcheck is strictly a debugging
-feature.
-
-
-Downloading
------------
-
-As of version 2.6.31-rc1, kmemcheck is included in the mainline kernel.
-
-
-Configuring and compiling
--------------------------
-
-kmemcheck only works for the x86 (both 32- and 64-bit) platform. A number of
-configuration variables must have specific settings in order for the kmemcheck
-menu to even appear in "menuconfig". These are:
-
-- ``CONFIG_CC_OPTIMIZE_FOR_SIZE=n``
- This option is located under "General setup" / "Optimize for size".
-
- Without this, gcc will use certain optimizations that usually lead to
- false positive warnings from kmemcheck. An example of this is a 16-bit
- field in a struct, where gcc may load 32 bits, then discard the upper
- 16 bits. kmemcheck sees only the 32-bit load, and may trigger a
- warning for the upper 16 bits (if they're uninitialized).
-
-- ``CONFIG_SLAB=y`` or ``CONFIG_SLUB=y``
- This option is located under "General setup" / "Choose SLAB
- allocator".
-
-- ``CONFIG_FUNCTION_TRACER=n``
- This option is located under "Kernel hacking" / "Tracers" / "Kernel
- Function Tracer"
-
- When function tracing is compiled in, gcc emits a call to another
- function at the beginning of every function. This means that when the
- page fault handler is called, the ftrace framework will be called
- before kmemcheck has had a chance to handle the fault. If ftrace then
- modifies memory that was tracked by kmemcheck, the result is an
- endless recursive page fault.
-
-- ``CONFIG_DEBUG_PAGEALLOC=n``
- This option is located under "Kernel hacking" / "Memory Debugging"
- / "Debug page memory allocations".
-
-In addition, I highly recommend turning on ``CONFIG_DEBUG_INFO=y``. This is also
-located under "Kernel hacking". With this, you will be able to get line number
-information from the kmemcheck warnings, which is extremely valuable in
-debugging a problem. This option is not mandatory, however, because it slows
-down the compilation process and produces a much bigger kernel image.
-
-Now the kmemcheck menu should be visible (under "Kernel hacking" / "Memory
-Debugging" / "kmemcheck: trap use of uninitialized memory"). Here follows
-a description of the kmemcheck configuration variables:
-
-- ``CONFIG_KMEMCHECK``
- This must be enabled in order to use kmemcheck at all...
-
-- ``CONFIG_KMEMCHECK_``[``DISABLED`` | ``ENABLED`` | ``ONESHOT``]``_BY_DEFAULT``
- This option controls the status of kmemcheck at boot-time. "Enabled"
- will enable kmemcheck right from the start, "disabled" will boot the
- kernel as normal (but with the kmemcheck code compiled in, so it can
- be enabled at run-time after the kernel has booted), and "one-shot" is
- a special mode which will turn kmemcheck off automatically after
- detecting the first use of uninitialized memory.
-
- If you are using kmemcheck to actively debug a problem, then you
- probably want to choose "enabled" here.
-
- The one-shot mode is mostly useful in automated test setups because it
- can prevent floods of warnings and increase the chances of the machine
- surviving in case something is really wrong. In other cases, the one-
- shot mode could actually be counter-productive because it would turn
- itself off at the very first error -- in the case of a false positive
- too -- and this would come in the way of debugging the specific
- problem you were interested in.
-
- If you would like to use your kernel as normal, but with a chance to
- enable kmemcheck in case of some problem, it might be a good idea to
- choose "disabled" here. When kmemcheck is disabled, most of the run-
- time overhead is not incurred, and the kernel will be almost as fast
- as normal.
-
-- ``CONFIG_KMEMCHECK_QUEUE_SIZE``
- Select the maximum number of error reports to store in an internal
- (fixed-size) buffer. Since errors can occur virtually anywhere and in
- any context, we need a temporary storage area which is guaranteed not
- to generate any other page faults when accessed. The queue will be
- emptied as soon as a tasklet may be scheduled. If the queue is full,
- new error reports will be lost.
-
- The default value of 64 is probably fine. If some code produces more
- than 64 errors within an irqs-off section, then the code is likely to
- produce many, many more, too, and these additional reports seldom give
- any more information (the first report is usually the most valuable
- anyway).
-
- This number might have to be adjusted if you are not using serial
- console or similar to capture the kernel log. If you are using the
- "dmesg" command to save the log, then getting a lot of kmemcheck
- warnings might overflow the kernel log itself, and the earlier reports
- will get lost in that way instead. Try setting this to 10 or so on
- such a setup.
-
-- ``CONFIG_KMEMCHECK_SHADOW_COPY_SHIFT``
- Select the number of shadow bytes to save along with each entry of the
- error-report queue. These bytes indicate what parts of an allocation
- are initialized, uninitialized, etc. and will be displayed when an
- error is detected to help the debugging of a particular problem.
-
- The number entered here is actually the logarithm of the number of
- bytes that will be saved. So if you pick for example 5 here, kmemcheck
- will save 2^5 = 32 bytes.
-
- The default value should be fine for debugging most problems. It also
- fits nicely within 80 columns.
-
-- ``CONFIG_KMEMCHECK_PARTIAL_OK``
- This option (when enabled) works around certain GCC optimizations that
- produce 32-bit reads from 16-bit variables where the upper 16 bits are
- thrown away afterwards.
-
- The default value (enabled) is recommended. This may of course hide
- some real errors, but disabling it would probably produce a lot of
- false positives.
-
-- ``CONFIG_KMEMCHECK_BITOPS_OK``
- This option silences warnings that would be generated for bit-field
- accesses where not all the bits are initialized at the same time. This
- may also hide some real bugs.
-
- This option is probably obsolete, or it should be replaced with
- the kmemcheck-/bitfield-annotations for the code in question. The
- default value is therefore fine.
-
-Now compile the kernel as usual.
-
-
-How to use
-----------
-
-Booting
-~~~~~~~
-
-First some information about the command-line options. There is only one
-option specific to kmemcheck, and this is called "kmemcheck". It can be used
-to override the default mode as chosen by the ``CONFIG_KMEMCHECK_*_BY_DEFAULT``
-option. Its possible settings are:
-
-- ``kmemcheck=0`` (disabled)
-- ``kmemcheck=1`` (enabled)
-- ``kmemcheck=2`` (one-shot mode)
-
-If SLUB debugging has been enabled in the kernel, it may take precedence over
-kmemcheck in such a way that the slab caches which are under SLUB debugging
-will not be tracked by kmemcheck. In order to ensure that this doesn't happen
-(even though it shouldn't by default), use SLUB's boot option ``slub_debug``,
-like this: ``slub_debug=-``
-
-In fact, this option may also be used for fine-grained control over SLUB vs.
-kmemcheck. For example, if the command line includes
-``kmemcheck=1 slub_debug=,dentry``, then SLUB debugging will be used only
-for the "dentry" slab cache, and with kmemcheck tracking all the other
-caches. This is advanced usage, however, and is not generally recommended.
-
-
-Run-time enable/disable
-~~~~~~~~~~~~~~~~~~~~~~~
-
-When the kernel has booted, it is possible to enable or disable kmemcheck at
-run-time. WARNING: This feature is still experimental and may cause false
-positive warnings to appear. Therefore, try not to use this. If you find that
-it doesn't work properly (e.g. you see an unreasonable amount of warnings), I
-will be happy to take bug reports.
-
-Use the file ``/proc/sys/kernel/kmemcheck`` for this purpose, e.g.::
-
- $ echo 0 > /proc/sys/kernel/kmemcheck # disables kmemcheck
-
-The numbers are the same as for the ``kmemcheck=`` command-line option.
-
-
-Debugging
-~~~~~~~~~
-
-A typical report will look something like this::
-
- WARNING: kmemcheck: Caught 32-bit read from uninitialized memory (ffff88003e4a2024)
- 80000000000000000000000000000000000000000088ffff0000000000000000
- i i i i u u u u i i i i i i i i u u u u u u u u u u u u u u u u
- ^
-
- Pid: 1856, comm: ntpdate Not tainted 2.6.29-rc5 #264 945P-A
- RIP: 0010:[<ffffffff8104ede8>] [<ffffffff8104ede8>] __dequeue_signal+0xc8/0x190
- RSP: 0018:ffff88003cdf7d98 EFLAGS: 00210002
- RAX: 0000000000000030 RBX: ffff88003d4ea968 RCX: 0000000000000009
- RDX: ffff88003e5d6018 RSI: ffff88003e5d6024 RDI: ffff88003cdf7e84
- RBP: ffff88003cdf7db8 R08: ffff88003e5d6000 R09: 0000000000000000
- R10: 0000000000000080 R11: 0000000000000000 R12: 000000000000000e
- R13: ffff88003cdf7e78 R14: ffff88003d530710 R15: ffff88003d5a98c8
- FS: 0000000000000000(0000) GS:ffff880001982000(0063) knlGS:00000
- CS: 0010 DS: 002b ES: 002b CR0: 0000000080050033
- CR2: ffff88003f806ea0 CR3: 000000003c036000 CR4: 00000000000006a0
- DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
- DR3: 0000000000000000 DR6: 00000000ffff4ff0 DR7: 0000000000000400
- [<ffffffff8104f04e>] dequeue_signal+0x8e/0x170
- [<ffffffff81050bd8>] get_signal_to_deliver+0x98/0x390
- [<ffffffff8100b87d>] do_notify_resume+0xad/0x7d0
- [<ffffffff8100c7b5>] int_signal+0x12/0x17
- [<ffffffffffffffff>] 0xffffffffffffffff
-
-The single most valuable information in this report is the RIP (or EIP on 32-
-bit) value. This will help us pinpoint exactly which instruction that caused
-the warning.
-
-If your kernel was compiled with ``CONFIG_DEBUG_INFO=y``, then all we have to do
-is give this address to the addr2line program, like this::
-
- $ addr2line -e vmlinux -i ffffffff8104ede8
- arch/x86/include/asm/string_64.h:12
- include/asm-generic/siginfo.h:287
- kernel/signal.c:380
- kernel/signal.c:410
-
-The "``-e vmlinux``" tells addr2line which file to look in. **IMPORTANT:**
-This must be the vmlinux of the kernel that produced the warning in the
-first place! If not, the line number information will almost certainly be
-wrong.
-
-The "``-i``" tells addr2line to also print the line numbers of inlined
-functions. In this case, the flag was very important, because otherwise,
-it would only have printed the first line, which is just a call to
-``memcpy()``, which could be called from a thousand places in the kernel, and
-is therefore not very useful. These inlined functions would not show up in
-the stack trace above, simply because the kernel doesn't load the extra
-debugging information. This technique can of course be used with ordinary
-kernel oopses as well.
-
-In this case, it's the caller of ``memcpy()`` that is interesting, and it can be
-found in ``include/asm-generic/siginfo.h``, line 287::
-
- 281 static inline void copy_siginfo(struct siginfo *to, struct siginfo *from)
- 282 {
- 283 if (from->si_code < 0)
- 284 memcpy(to, from, sizeof(*to));
- 285 else
- 286 /* _sigchld is currently the largest know union member */
- 287 memcpy(to, from, __ARCH_SI_PREAMBLE_SIZE + sizeof(from->_sifields._sigchld));
- 288 }
-
-Since this was a read (kmemcheck usually warns about reads only, though it can
-warn about writes to unallocated or freed memory as well), it was probably the
-"from" argument which contained some uninitialized bytes. Following the chain
-of calls, we move upwards to see where "from" was allocated or initialized,
-``kernel/signal.c``, line 380::
-
- 359 static void collect_signal(int sig, struct sigpending *list, siginfo_t *info)
- 360 {
- ...
- 367 list_for_each_entry(q, &list->list, list) {
- 368 if (q->info.si_signo == sig) {
- 369 if (first)
- 370 goto still_pending;
- 371 first = q;
- ...
- 377 if (first) {
- 378 still_pending:
- 379 list_del_init(&first->list);
- 380 copy_siginfo(info, &first->info);
- 381 __sigqueue_free(first);
- ...
- 392 }
- 393 }
-
-Here, it is ``&first->info`` that is being passed on to ``copy_siginfo()``. The
-variable ``first`` was found on a list -- passed in as the second argument to
-``collect_signal()``. We continue our journey through the stack, to figure out
-where the item on "list" was allocated or initialized. We move to line 410::
-
- 395 static int __dequeue_signal(struct sigpending *pending, sigset_t *mask,
- 396 siginfo_t *info)
- 397 {
- ...
- 410 collect_signal(sig, pending, info);
- ...
- 414 }
-
-Now we need to follow the ``pending`` pointer, since that is being passed on to
-``collect_signal()`` as ``list``. At this point, we've run out of lines from the
-"addr2line" output. Not to worry, we just paste the next addresses from the
-kmemcheck stack dump, i.e.::
-
- [<ffffffff8104f04e>] dequeue_signal+0x8e/0x170
- [<ffffffff81050bd8>] get_signal_to_deliver+0x98/0x390
- [<ffffffff8100b87d>] do_notify_resume+0xad/0x7d0
- [<ffffffff8100c7b5>] int_signal+0x12/0x17
-
- $ addr2line -e vmlinux -i ffffffff8104f04e ffffffff81050bd8 \
- ffffffff8100b87d ffffffff8100c7b5
- kernel/signal.c:446
- kernel/signal.c:1806
- arch/x86/kernel/signal.c:805
- arch/x86/kernel/signal.c:871
- arch/x86/kernel/entry_64.S:694
-
-Remember that since these addresses were found on the stack and not as the
-RIP value, they actually point to the _next_ instruction (they are return
-addresses). This becomes obvious when we look at the code for line 446::
-
- 422 int dequeue_signal(struct task_struct *tsk, sigset_t *mask, siginfo_t *info)
- 423 {
- ...
- 431 signr = __dequeue_signal(&tsk->signal->shared_pending,
- 432 mask, info);
- 433 /*
- 434 * itimer signal ?
- 435 *
- 436 * itimers are process shared and we restart periodic
- 437 * itimers in the signal delivery path to prevent DoS
- 438 * attacks in the high resolution timer case. This is
- 439 * compliant with the old way of self restarting
- 440 * itimers, as the SIGALRM is a legacy signal and only
- 441 * queued once. Changing the restart behaviour to
- 442 * restart the timer in the signal dequeue path is
- 443 * reducing the timer noise on heavy loaded !highres
- 444 * systems too.
- 445 */
- 446 if (unlikely(signr == SIGALRM)) {
- ...
- 489 }
-
-So instead of looking at 446, we should be looking at 431, which is the line
-that executes just before 446. Here we see that what we are looking for is
-``&tsk->signal->shared_pending``.
-
-Our next task is now to figure out which function that puts items on this
-``shared_pending`` list. A crude, but efficient tool, is ``git grep``::
-
- $ git grep -n 'shared_pending' kernel/
- ...
- kernel/signal.c:828: pending = group ? &t->signal->shared_pending : &t->pending;
- kernel/signal.c:1339: pending = group ? &t->signal->shared_pending : &t->pending;
- ...
-
-There were more results, but none of them were related to list operations,
-and these were the only assignments. We inspect the line numbers more closely
-and find that this is indeed where items are being added to the list::
-
- 816 static int send_signal(int sig, struct siginfo *info, struct task_struct *t,
- 817 int group)
- 818 {
- ...
- 828 pending = group ? &t->signal->shared_pending : &t->pending;
- ...
- 851 q = __sigqueue_alloc(t, GFP_ATOMIC, (sig < SIGRTMIN &&
- 852 (is_si_special(info) ||
- 853 info->si_code >= 0)));
- 854 if (q) {
- 855 list_add_tail(&q->list, &pending->list);
- ...
- 890 }
-
-and::
-
- 1309 int send_sigqueue(struct sigqueue *q, struct task_struct *t, int group)
- 1310 {
- ....
- 1339 pending = group ? &t->signal->shared_pending : &t->pending;
- 1340 list_add_tail(&q->list, &pending->list);
- ....
- 1347 }
-
-In the first case, the list element we are looking for, ``q``, is being
-returned from the function ``__sigqueue_alloc()``, which looks like an
-allocation function. Let's take a look at it::
-
- 187 static struct sigqueue *__sigqueue_alloc(struct task_struct *t, gfp_t flags,
- 188 int override_rlimit)
- 189 {
- 190 struct sigqueue *q = NULL;
- 191 struct user_struct *user;
- 192
- 193 /*
- 194 * We won't get problems with the target's UID changing under us
- 195 * because changing it requires RCU be used, and if t != current, the
- 196 * caller must be holding the RCU readlock (by way of a spinlock) and
- 197 * we use RCU protection here
- 198 */
- 199 user = get_uid(__task_cred(t)->user);
- 200 atomic_inc(&user->sigpending);
- 201 if (override_rlimit ||
- 202 atomic_read(&user->sigpending) <=
- 203 t->signal->rlim[RLIMIT_SIGPENDING].rlim_cur)
- 204 q = kmem_cache_alloc(sigqueue_cachep, flags);
- 205 if (unlikely(q == NULL)) {
- 206 atomic_dec(&user->sigpending);
- 207 free_uid(user);
- 208 } else {
- 209 INIT_LIST_HEAD(&q->list);
- 210 q->flags = 0;
- 211 q->user = user;
- 212 }
- 213
- 214 return q;
- 215 }
-
-We see that this function initializes ``q->list``, ``q->flags``, and
-``q->user``. It seems that now is the time to look at the definition of
-``struct sigqueue``, e.g.::
-
- 14 struct sigqueue {
- 15 struct list_head list;
- 16 int flags;
- 17 siginfo_t info;
- 18 struct user_struct *user;
- 19 };
-
-And, you might remember, it was a ``memcpy()`` on ``&first->info`` that
-caused the warning, so this makes perfect sense. It also seems reasonable
-to assume that it is the caller of ``__sigqueue_alloc()`` that has the
-responsibility of filling out (initializing) this member.
-
-But just which fields of the struct were uninitialized? Let's look at
-kmemcheck's report again::
-
- WARNING: kmemcheck: Caught 32-bit read from uninitialized memory (ffff88003e4a2024)
- 80000000000000000000000000000000000000000088ffff0000000000000000
- i i i i u u u u i i i i i i i i u u u u u u u u u u u u u u u u
- ^
-
-These first two lines are the memory dump of the memory object itself, and
-the shadow bytemap, respectively. The memory object itself is in this case
-``&first->info``. Just beware that the start of this dump is NOT the start
-of the object itself! The position of the caret (^) corresponds with the
-address of the read (ffff88003e4a2024).
-
-The shadow bytemap dump legend is as follows:
-
-- i: initialized
-- u: uninitialized
-- a: unallocated (memory has been allocated by the slab layer, but has not
- yet been handed off to anybody)
-- f: freed (memory has been allocated by the slab layer, but has been freed
- by the previous owner)
-
-In order to figure out where (relative to the start of the object) the
-uninitialized memory was located, we have to look at the disassembly. For
-that, we'll need the RIP address again::
-
- RIP: 0010:[<ffffffff8104ede8>] [<ffffffff8104ede8>] __dequeue_signal+0xc8/0x190
-
- $ objdump -d --no-show-raw-insn vmlinux | grep -C 8 ffffffff8104ede8:
- ffffffff8104edc8: mov %r8,0x8(%r8)
- ffffffff8104edcc: test %r10d,%r10d
- ffffffff8104edcf: js ffffffff8104ee88 <__dequeue_signal+0x168>
- ffffffff8104edd5: mov %rax,%rdx
- ffffffff8104edd8: mov $0xc,%ecx
- ffffffff8104eddd: mov %r13,%rdi
- ffffffff8104ede0: mov $0x30,%eax
- ffffffff8104ede5: mov %rdx,%rsi
- ffffffff8104ede8: rep movsl %ds:(%rsi),%es:(%rdi)
- ffffffff8104edea: test $0x2,%al
- ffffffff8104edec: je ffffffff8104edf0 <__dequeue_signal+0xd0>
- ffffffff8104edee: movsw %ds:(%rsi),%es:(%rdi)
- ffffffff8104edf0: test $0x1,%al
- ffffffff8104edf2: je ffffffff8104edf5 <__dequeue_signal+0xd5>
- ffffffff8104edf4: movsb %ds:(%rsi),%es:(%rdi)
- ffffffff8104edf5: mov %r8,%rdi
- ffffffff8104edf8: callq ffffffff8104de60 <__sigqueue_free>
-
-As expected, it's the "``rep movsl``" instruction from the ``memcpy()``
-that causes the warning. We know about ``REP MOVSL`` that it uses the register
-``RCX`` to count the number of remaining iterations. By taking a look at the
-register dump again (from the kmemcheck report), we can figure out how many
-bytes were left to copy::
-
- RAX: 0000000000000030 RBX: ffff88003d4ea968 RCX: 0000000000000009
-
-By looking at the disassembly, we also see that ``%ecx`` is being loaded
-with the value ``$0xc`` just before (ffffffff8104edd8), so we are very
-lucky. Keep in mind that this is the number of iterations, not bytes. And
-since this is a "long" operation, we need to multiply by 4 to get the
-number of bytes. So this means that the uninitialized value was encountered
-at 4 * (0xc - 0x9) = 12 bytes from the start of the object.
-
-We can now try to figure out which field of the "``struct siginfo``" that
-was not initialized. This is the beginning of the struct::
-
- 40 typedef struct siginfo {
- 41 int si_signo;
- 42 int si_errno;
- 43 int si_code;
- 44
- 45 union {
- ..
- 92 } _sifields;
- 93 } siginfo_t;
-
-On 64-bit, the int is 4 bytes long, so it must the union member that has
-not been initialized. We can verify this using gdb::
-
- $ gdb vmlinux
- ...
- (gdb) p &((struct siginfo *) 0)->_sifields
- $1 = (union {...} *) 0x10
-
-Actually, it seems that the union member is located at offset 0x10 -- which
-means that gcc has inserted 4 bytes of padding between the members ``si_code``
-and ``_sifields``. We can now get a fuller picture of the memory dump::
-
- _----------------------------=> si_code
- / _--------------------=> (padding)
- | / _------------=> _sifields(._kill._pid)
- | | / _----=> _sifields(._kill._uid)
- | | | /
- -------|-------|-------|-------|
- 80000000000000000000000000000000000000000088ffff0000000000000000
- i i i i u u u u i i i i i i i i u u u u u u u u u u u u u u u u
-
-This allows us to realize another important fact: ``si_code`` contains the
-value 0x80. Remember that x86 is little endian, so the first 4 bytes
-"80000000" are really the number 0x00000080. With a bit of research, we
-find that this is actually the constant ``SI_KERNEL`` defined in
-``include/asm-generic/siginfo.h``::
-
- 144 #define SI_KERNEL 0x80 /* sent by the kernel from somewhere */
-
-This macro is used in exactly one place in the x86 kernel: In ``send_signal()``
-in ``kernel/signal.c``::
-
- 816 static int send_signal(int sig, struct siginfo *info, struct task_struct *t,
- 817 int group)
- 818 {
- ...
- 828 pending = group ? &t->signal->shared_pending : &t->pending;
- ...
- 851 q = __sigqueue_alloc(t, GFP_ATOMIC, (sig < SIGRTMIN &&
- 852 (is_si_special(info) ||
- 853 info->si_code >= 0)));
- 854 if (q) {
- 855 list_add_tail(&q->list, &pending->list);
- 856 switch ((unsigned long) info) {
- ...
- 865 case (unsigned long) SEND_SIG_PRIV:
- 866 q->info.si_signo = sig;
- 867 q->info.si_errno = 0;
- 868 q->info.si_code = SI_KERNEL;
- 869 q->info.si_pid = 0;
- 870 q->info.si_uid = 0;
- 871 break;
- ...
- 890 }
-
-Not only does this match with the ``.si_code`` member, it also matches the place
-we found earlier when looking for where siginfo_t objects are enqueued on the
-``shared_pending`` list.
-
-So to sum up: It seems that it is the padding introduced by the compiler
-between two struct fields that is uninitialized, and this gets reported when
-we do a ``memcpy()`` on the struct. This means that we have identified a false
-positive warning.
-
-Normally, kmemcheck will not report uninitialized accesses in ``memcpy()`` calls
-when both the source and destination addresses are tracked. (Instead, we copy
-the shadow bytemap as well). In this case, the destination address clearly
-was not tracked. We can dig a little deeper into the stack trace from above::
-
- arch/x86/kernel/signal.c:805
- arch/x86/kernel/signal.c:871
- arch/x86/kernel/entry_64.S:694
-
-And we clearly see that the destination siginfo object is located on the
-stack::
-
- 782 static void do_signal(struct pt_regs *regs)
- 783 {
- 784 struct k_sigaction ka;
- 785 siginfo_t info;
- ...
- 804 signr = get_signal_to_deliver(&info, &ka, regs, NULL);
- ...
- 854 }
-
-And this ``&info`` is what eventually gets passed to ``copy_siginfo()`` as the
-destination argument.
-
-Now, even though we didn't find an actual error here, the example is still a
-good one, because it shows how one would go about to find out what the report
-was all about.
-
-
-Annotating false positives
-~~~~~~~~~~~~~~~~~~~~~~~~~~
-
-There are a few different ways to make annotations in the source code that
-will keep kmemcheck from checking and reporting certain allocations. Here
-they are:
-
-- ``__GFP_NOTRACK_FALSE_POSITIVE``
- This flag can be passed to ``kmalloc()`` or ``kmem_cache_alloc()``
- (therefore also to other functions that end up calling one of
- these) to indicate that the allocation should not be tracked
- because it would lead to a false positive report. This is a "big
- hammer" way of silencing kmemcheck; after all, even if the false
- positive pertains to particular field in a struct, for example, we
- will now lose the ability to find (real) errors in other parts of
- the same struct.
-
- Example::
-
- /* No warnings will ever trigger on accessing any part of x */
- x = kmalloc(sizeof *x, GFP_KERNEL | __GFP_NOTRACK_FALSE_POSITIVE);
-
-- ``kmemcheck_bitfield_begin(name)``/``kmemcheck_bitfield_end(name)`` and
- ``kmemcheck_annotate_bitfield(ptr, name)``
- The first two of these three macros can be used inside struct
- definitions to signal, respectively, the beginning and end of a
- bitfield. Additionally, this will assign the bitfield a name, which
- is given as an argument to the macros.
-
- Having used these markers, one can later use
- kmemcheck_annotate_bitfield() at the point of allocation, to indicate
- which parts of the allocation is part of a bitfield.
-
- Example::
-
- struct foo {
- int x;
-
- kmemcheck_bitfield_begin(flags);
- int flag_a:1;
- int flag_b:1;
- kmemcheck_bitfield_end(flags);
-
- int y;
- };
-
- struct foo *x = kmalloc(sizeof *x);
-
- /* No warnings will trigger on accessing the bitfield of x */
- kmemcheck_annotate_bitfield(x, flags);
-
- Note that ``kmemcheck_annotate_bitfield()`` can be used even before the
- return value of ``kmalloc()`` is checked -- in other words, passing NULL
- as the first argument is legal (and will do nothing).
-
-
-Reporting errors
-----------------
-
-As we have seen, kmemcheck will produce false positive reports. Therefore, it
-is not very wise to blindly post kmemcheck warnings to mailing lists and
-maintainers. Instead, I encourage maintainers and developers to find errors
-in their own code. If you get a warning, you can try to work around it, try
-to figure out if it's a real error or not, or simply ignore it. Most
-developers know their own code and will quickly and efficiently determine the
-root cause of a kmemcheck report. This is therefore also the most efficient
-way to work with kmemcheck.
-
-That said, we (the kmemcheck maintainers) will always be on the lookout for
-false positives that we can annotate and silence. So whatever you find,
-please drop us a note privately! Kernel configs and steps to reproduce (if
-available) are of course a great help too.
-
-Happy hacking!
-
-
-Technical description
----------------------
-
-kmemcheck works by marking memory pages non-present. This means that whenever
-somebody attempts to access the page, a page fault is generated. The page
-fault handler notices that the page was in fact only hidden, and so it calls
-on the kmemcheck code to make further investigations.
-
-When the investigations are completed, kmemcheck "shows" the page by marking
-it present (as it would be under normal circumstances). This way, the
-interrupted code can continue as usual.
-
-But after the instruction has been executed, we should hide the page again, so
-that we can catch the next access too! Now kmemcheck makes use of a debugging
-feature of the processor, namely single-stepping. When the processor has
-finished the one instruction that generated the memory access, a debug
-exception is raised. From here, we simply hide the page again and continue
-execution, this time with the single-stepping feature turned off.
-
-kmemcheck requires some assistance from the memory allocator in order to work.
-The memory allocator needs to
-
- 1. Tell kmemcheck about newly allocated pages and pages that are about to
- be freed. This allows kmemcheck to set up and tear down the shadow memory
- for the pages in question. The shadow memory stores the status of each
- byte in the allocation proper, e.g. whether it is initialized or
- uninitialized.
-
- 2. Tell kmemcheck which parts of memory should be marked uninitialized.
- There are actually a few more states, such as "not yet allocated" and
- "recently freed".
-
-If a slab cache is set up using the SLAB_NOTRACK flag, it will never return
-memory that can take page faults because of kmemcheck.
-
-If a slab cache is NOT set up using the SLAB_NOTRACK flag, callers can still
-request memory with the __GFP_NOTRACK or __GFP_NOTRACK_FALSE_POSITIVE flags.
-This does not prevent the page faults from occurring, however, but marks the
-object in question as being initialized so that no warnings will ever be
-produced for this object.
-
-Currently, the SLAB and SLUB allocators are supported by kmemcheck.
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -7670,16 +7670,6 @@ F: include/linux/kdb.h
F: include/linux/kgdb.h
F: kernel/debug/
-KMEMCHECK
-M: Vegard Nossum <[email protected]>
-M: Pekka Enberg <[email protected]>
-S: Maintained
-F: Documentation/dev-tools/kmemcheck.rst
-F: arch/x86/include/asm/kmemcheck.h
-F: arch/x86/mm/kmemcheck/
-F: include/linux/kmemcheck.h
-F: mm/kmemcheck.c
-
KMEMLEAK
M: Catalin Marinas <[email protected]>
S: Maintained
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -111,7 +111,6 @@ config X86
select HAVE_ARCH_JUMP_LABEL
select HAVE_ARCH_KASAN if X86_64
select HAVE_ARCH_KGDB
- select HAVE_ARCH_KMEMCHECK
select HAVE_ARCH_MMAP_RND_BITS if MMU
select HAVE_ARCH_MMAP_RND_COMPAT_BITS if MMU && COMPAT
select HAVE_ARCH_COMPAT_MMAP_BASES if MMU && COMPAT
@@ -1443,7 +1442,7 @@ config ARCH_DMA_ADDR_T_64BIT
config X86_DIRECT_GBPAGES
def_bool y
- depends on X86_64 && !DEBUG_PAGEALLOC && !KMEMCHECK
+ depends on X86_64 && !DEBUG_PAGEALLOC
---help---
Certain kernel features effectively disable kernel
linear 1 GB mappings (even if the CPU otherwise
--- a/arch/x86/include/asm/kmemcheck.h
+++ b/arch/x86/include/asm/kmemcheck.h
@@ -1,43 +1 @@
/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef ASM_X86_KMEMCHECK_H
-#define ASM_X86_KMEMCHECK_H
-
-#include <linux/types.h>
-#include <asm/ptrace.h>
-
-#ifdef CONFIG_KMEMCHECK
-bool kmemcheck_active(struct pt_regs *regs);
-
-void kmemcheck_show(struct pt_regs *regs);
-void kmemcheck_hide(struct pt_regs *regs);
-
-bool kmemcheck_fault(struct pt_regs *regs,
- unsigned long address, unsigned long error_code);
-bool kmemcheck_trap(struct pt_regs *regs);
-#else
-static inline bool kmemcheck_active(struct pt_regs *regs)
-{
- return false;
-}
-
-static inline void kmemcheck_show(struct pt_regs *regs)
-{
-}
-
-static inline void kmemcheck_hide(struct pt_regs *regs)
-{
-}
-
-static inline bool kmemcheck_fault(struct pt_regs *regs,
- unsigned long address, unsigned long error_code)
-{
- return false;
-}
-
-static inline bool kmemcheck_trap(struct pt_regs *regs)
-{
- return false;
-}
-#endif /* CONFIG_KMEMCHECK */
-
-#endif
--- a/arch/x86/include/asm/string_32.h
+++ b/arch/x86/include/asm/string_32.h
@@ -179,8 +179,6 @@ static inline void *__memcpy3d(void *to,
* No 3D Now!
*/
-#ifndef CONFIG_KMEMCHECK
-
#if (__GNUC__ >= 4)
#define memcpy(t, f, n) __builtin_memcpy(t, f, n)
#else
@@ -189,13 +187,6 @@ static inline void *__memcpy3d(void *to,
? __constant_memcpy((t), (f), (n)) \
: __memcpy((t), (f), (n)))
#endif
-#else
-/*
- * kmemcheck becomes very happy if we use the REP instructions unconditionally,
- * because it means that we know both memory operands in advance.
- */
-#define memcpy(t, f, n) __memcpy((t), (f), (n))
-#endif
#endif
#endif /* !CONFIG_FORTIFY_SOURCE */
--- a/arch/x86/include/asm/string_64.h
+++ b/arch/x86/include/asm/string_64.h
@@ -33,7 +33,6 @@ extern void *memcpy(void *to, const void
extern void *__memcpy(void *to, const void *from, size_t len);
#ifndef CONFIG_FORTIFY_SOURCE
-#ifndef CONFIG_KMEMCHECK
#if (__GNUC__ == 4 && __GNUC_MINOR__ < 3) || __GNUC__ < 4
#define memcpy(dst, src, len) \
({ \
@@ -46,13 +45,6 @@ extern void *__memcpy(void *to, const vo
__ret; \
})
#endif
-#else
-/*
- * kmemcheck becomes very happy if we use the REP instructions unconditionally,
- * because it means that we know both memory operands in advance.
- */
-#define memcpy(dst, src, len) __inline_memcpy((dst), (src), (len))
-#endif
#endif /* !CONFIG_FORTIFY_SOURCE */
#define __HAVE_ARCH_MEMSET
--- a/arch/x86/kernel/cpu/intel.c
+++ b/arch/x86/kernel/cpu/intel.c
@@ -250,21 +250,6 @@ static void early_init_intel(struct cpui
if (c->x86 == 6 && c->x86_model < 15)
clear_cpu_cap(c, X86_FEATURE_PAT);
-#ifdef CONFIG_KMEMCHECK
- /*
- * P4s have a "fast strings" feature which causes single-
- * stepping REP instructions to only generate a #DB on
- * cache-line boundaries.
- *
- * Ingo Molnar reported a Pentium D (model 6) and a Xeon
- * (model 2) with the same problem.
- */
- if (c->x86 == 15)
- if (msr_clear_bit(MSR_IA32_MISC_ENABLE,
- MSR_IA32_MISC_ENABLE_FAST_STRING_BIT) > 0)
- pr_info("kmemcheck: Disabling fast string operations\n");
-#endif
-
/*
* If fast string is not enabled in IA32_MISC_ENABLE for any reason,
* clear the fast string and enhanced fast string CPU capabilities.
--- a/arch/x86/mm/Makefile
+++ b/arch/x86/mm/Makefile
@@ -29,8 +29,6 @@ obj-$(CONFIG_X86_PTDUMP) += debug_pageta
obj-$(CONFIG_HIGHMEM) += highmem_32.o
-obj-$(CONFIG_KMEMCHECK) += kmemcheck/
-
KASAN_SANITIZE_kasan_init_$(BITS).o := n
obj-$(CONFIG_KASAN) += kasan_init_$(BITS).o
--- a/arch/x86/mm/init.c
+++ b/arch/x86/mm/init.c
@@ -170,12 +170,11 @@ static void enable_global_pages(void)
static void __init probe_page_size_mask(void)
{
/*
- * For CONFIG_KMEMCHECK or pagealloc debugging, identity mapping will
- * use small pages.
+ * For pagealloc debugging, identity mapping will use small pages.
* This will simplify cpa(), which otherwise needs to support splitting
* large pages into small in interrupt context, etc.
*/
- if (boot_cpu_has(X86_FEATURE_PSE) && !debug_pagealloc_enabled() && !IS_ENABLED(CONFIG_KMEMCHECK))
+ if (boot_cpu_has(X86_FEATURE_PSE) && !debug_pagealloc_enabled())
page_size_mask |= 1 << PG_LEVEL_2M;
else
direct_gbpages = 0;
--- a/arch/x86/mm/kmemcheck/Makefile
+++ /dev/null
@@ -1 +0,0 @@
-obj-y := error.o kmemcheck.o opcode.o pte.o selftest.o shadow.o
--- a/arch/x86/mm/kmemcheck/error.c
+++ b/arch/x86/mm/kmemcheck/error.c
@@ -1,228 +1 @@
// SPDX-License-Identifier: GPL-2.0
-#include <linux/interrupt.h>
-#include <linux/kdebug.h>
-#include <linux/kmemcheck.h>
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/ptrace.h>
-#include <linux/stacktrace.h>
-#include <linux/string.h>
-
-#include "error.h"
-#include "shadow.h"
-
-enum kmemcheck_error_type {
- KMEMCHECK_ERROR_INVALID_ACCESS,
- KMEMCHECK_ERROR_BUG,
-};
-
-#define SHADOW_COPY_SIZE (1 << CONFIG_KMEMCHECK_SHADOW_COPY_SHIFT)
-
-struct kmemcheck_error {
- enum kmemcheck_error_type type;
-
- union {
- /* KMEMCHECK_ERROR_INVALID_ACCESS */
- struct {
- /* Kind of access that caused the error */
- enum kmemcheck_shadow state;
- /* Address and size of the erroneous read */
- unsigned long address;
- unsigned int size;
- };
- };
-
- struct pt_regs regs;
- struct stack_trace trace;
- unsigned long trace_entries[32];
-
- /* We compress it to a char. */
- unsigned char shadow_copy[SHADOW_COPY_SIZE];
- unsigned char memory_copy[SHADOW_COPY_SIZE];
-};
-
-/*
- * Create a ring queue of errors to output. We can't call printk() directly
- * from the kmemcheck traps, since this may call the console drivers and
- * result in a recursive fault.
- */
-static struct kmemcheck_error error_fifo[CONFIG_KMEMCHECK_QUEUE_SIZE];
-static unsigned int error_count;
-static unsigned int error_rd;
-static unsigned int error_wr;
-static unsigned int error_missed_count;
-
-static struct kmemcheck_error *error_next_wr(void)
-{
- struct kmemcheck_error *e;
-
- if (error_count == ARRAY_SIZE(error_fifo)) {
- ++error_missed_count;
- return NULL;
- }
-
- e = &error_fifo[error_wr];
- if (++error_wr == ARRAY_SIZE(error_fifo))
- error_wr = 0;
- ++error_count;
- return e;
-}
-
-static struct kmemcheck_error *error_next_rd(void)
-{
- struct kmemcheck_error *e;
-
- if (error_count == 0)
- return NULL;
-
- e = &error_fifo[error_rd];
- if (++error_rd == ARRAY_SIZE(error_fifo))
- error_rd = 0;
- --error_count;
- return e;
-}
-
-void kmemcheck_error_recall(void)
-{
- static const char *desc[] = {
- [KMEMCHECK_SHADOW_UNALLOCATED] = "unallocated",
- [KMEMCHECK_SHADOW_UNINITIALIZED] = "uninitialized",
- [KMEMCHECK_SHADOW_INITIALIZED] = "initialized",
- [KMEMCHECK_SHADOW_FREED] = "freed",
- };
-
- static const char short_desc[] = {
- [KMEMCHECK_SHADOW_UNALLOCATED] = 'a',
- [KMEMCHECK_SHADOW_UNINITIALIZED] = 'u',
- [KMEMCHECK_SHADOW_INITIALIZED] = 'i',
- [KMEMCHECK_SHADOW_FREED] = 'f',
- };
-
- struct kmemcheck_error *e;
- unsigned int i;
-
- e = error_next_rd();
- if (!e)
- return;
-
- switch (e->type) {
- case KMEMCHECK_ERROR_INVALID_ACCESS:
- printk(KERN_WARNING "WARNING: kmemcheck: Caught %d-bit read from %s memory (%p)\n",
- 8 * e->size, e->state < ARRAY_SIZE(desc) ?
- desc[e->state] : "(invalid shadow state)",
- (void *) e->address);
-
- printk(KERN_WARNING);
- for (i = 0; i < SHADOW_COPY_SIZE; ++i)
- printk(KERN_CONT "%02x", e->memory_copy[i]);
- printk(KERN_CONT "\n");
-
- printk(KERN_WARNING);
- for (i = 0; i < SHADOW_COPY_SIZE; ++i) {
- if (e->shadow_copy[i] < ARRAY_SIZE(short_desc))
- printk(KERN_CONT " %c", short_desc[e->shadow_copy[i]]);
- else
- printk(KERN_CONT " ?");
- }
- printk(KERN_CONT "\n");
- printk(KERN_WARNING "%*c\n", 2 + 2
- * (int) (e->address & (SHADOW_COPY_SIZE - 1)), '^');
- break;
- case KMEMCHECK_ERROR_BUG:
- printk(KERN_EMERG "ERROR: kmemcheck: Fatal error\n");
- break;
- }
-
- __show_regs(&e->regs, 1);
- print_stack_trace(&e->trace, 0);
-}
-
-static void do_wakeup(unsigned long data)
-{
- while (error_count > 0)
- kmemcheck_error_recall();
-
- if (error_missed_count > 0) {
- printk(KERN_WARNING "kmemcheck: Lost %d error reports because "
- "the queue was too small\n", error_missed_count);
- error_missed_count = 0;
- }
-}
-
-static DECLARE_TASKLET(kmemcheck_tasklet, &do_wakeup, 0);
-
-/*
- * Save the context of an error report.
- */
-void kmemcheck_error_save(enum kmemcheck_shadow state,
- unsigned long address, unsigned int size, struct pt_regs *regs)
-{
- static unsigned long prev_ip;
-
- struct kmemcheck_error *e;
- void *shadow_copy;
- void *memory_copy;
-
- /* Don't report several adjacent errors from the same EIP. */
- if (regs->ip == prev_ip)
- return;
- prev_ip = regs->ip;
-
- e = error_next_wr();
- if (!e)
- return;
-
- e->type = KMEMCHECK_ERROR_INVALID_ACCESS;
-
- e->state = state;
- e->address = address;
- e->size = size;
-
- /* Save regs */
- memcpy(&e->regs, regs, sizeof(*regs));
-
- /* Save stack trace */
- e->trace.nr_entries = 0;
- e->trace.entries = e->trace_entries;
- e->trace.max_entries = ARRAY_SIZE(e->trace_entries);
- e->trace.skip = 0;
- save_stack_trace_regs(regs, &e->trace);
-
- /* Round address down to nearest 16 bytes */
- shadow_copy = kmemcheck_shadow_lookup(address
- & ~(SHADOW_COPY_SIZE - 1));
- BUG_ON(!shadow_copy);
-
- memcpy(e->shadow_copy, shadow_copy, SHADOW_COPY_SIZE);
-
- kmemcheck_show_addr(address);
- memory_copy = (void *) (address & ~(SHADOW_COPY_SIZE - 1));
- memcpy(e->memory_copy, memory_copy, SHADOW_COPY_SIZE);
- kmemcheck_hide_addr(address);
-
- tasklet_hi_schedule_first(&kmemcheck_tasklet);
-}
-
-/*
- * Save the context of a kmemcheck bug.
- */
-void kmemcheck_error_save_bug(struct pt_regs *regs)
-{
- struct kmemcheck_error *e;
-
- e = error_next_wr();
- if (!e)
- return;
-
- e->type = KMEMCHECK_ERROR_BUG;
-
- memcpy(&e->regs, regs, sizeof(*regs));
-
- e->trace.nr_entries = 0;
- e->trace.entries = e->trace_entries;
- e->trace.max_entries = ARRAY_SIZE(e->trace_entries);
- e->trace.skip = 1;
- save_stack_trace(&e->trace);
-
- tasklet_hi_schedule_first(&kmemcheck_tasklet);
-}
--- a/arch/x86/mm/kmemcheck/error.h
+++ b/arch/x86/mm/kmemcheck/error.h
@@ -1,16 +1 @@
/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef ARCH__X86__MM__KMEMCHECK__ERROR_H
-#define ARCH__X86__MM__KMEMCHECK__ERROR_H
-
-#include <linux/ptrace.h>
-
-#include "shadow.h"
-
-void kmemcheck_error_save(enum kmemcheck_shadow state,
- unsigned long address, unsigned int size, struct pt_regs *regs);
-
-void kmemcheck_error_save_bug(struct pt_regs *regs);
-
-void kmemcheck_error_recall(void);
-
-#endif
--- a/arch/x86/mm/kmemcheck/kmemcheck.c
+++ /dev/null
@@ -1,658 +0,0 @@
-/**
- * kmemcheck - a heavyweight memory checker for the linux kernel
- * Copyright (C) 2007, 2008 Vegard Nossum <[email protected]>
- * (With a lot of help from Ingo Molnar and Pekka Enberg.)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License (version 2) as
- * published by the Free Software Foundation.
- */
-
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/kallsyms.h>
-#include <linux/kernel.h>
-#include <linux/kmemcheck.h>
-#include <linux/mm.h>
-#include <linux/page-flags.h>
-#include <linux/percpu.h>
-#include <linux/ptrace.h>
-#include <linux/string.h>
-#include <linux/types.h>
-
-#include <asm/cacheflush.h>
-#include <asm/kmemcheck.h>
-#include <asm/pgtable.h>
-#include <asm/tlbflush.h>
-
-#include "error.h"
-#include "opcode.h"
-#include "pte.h"
-#include "selftest.h"
-#include "shadow.h"
-
-
-#ifdef CONFIG_KMEMCHECK_DISABLED_BY_DEFAULT
-# define KMEMCHECK_ENABLED 0
-#endif
-
-#ifdef CONFIG_KMEMCHECK_ENABLED_BY_DEFAULT
-# define KMEMCHECK_ENABLED 1
-#endif
-
-#ifdef CONFIG_KMEMCHECK_ONESHOT_BY_DEFAULT
-# define KMEMCHECK_ENABLED 2
-#endif
-
-int kmemcheck_enabled = KMEMCHECK_ENABLED;
-
-int __init kmemcheck_init(void)
-{
-#ifdef CONFIG_SMP
- /*
- * Limit SMP to use a single CPU. We rely on the fact that this code
- * runs before SMP is set up.
- */
- if (setup_max_cpus > 1) {
- printk(KERN_INFO
- "kmemcheck: Limiting number of CPUs to 1.\n");
- setup_max_cpus = 1;
- }
-#endif
-
- if (!kmemcheck_selftest()) {
- printk(KERN_INFO "kmemcheck: self-tests failed; disabling\n");
- kmemcheck_enabled = 0;
- return -EINVAL;
- }
-
- printk(KERN_INFO "kmemcheck: Initialized\n");
- return 0;
-}
-
-early_initcall(kmemcheck_init);
-
-/*
- * We need to parse the kmemcheck= option before any memory is allocated.
- */
-static int __init param_kmemcheck(char *str)
-{
- int val;
- int ret;
-
- if (!str)
- return -EINVAL;
-
- ret = kstrtoint(str, 0, &val);
- if (ret)
- return ret;
- kmemcheck_enabled = val;
- return 0;
-}
-
-early_param("kmemcheck", param_kmemcheck);
-
-int kmemcheck_show_addr(unsigned long address)
-{
- pte_t *pte;
-
- pte = kmemcheck_pte_lookup(address);
- if (!pte)
- return 0;
-
- set_pte(pte, __pte(pte_val(*pte) | _PAGE_PRESENT));
- __flush_tlb_one(address);
- return 1;
-}
-
-int kmemcheck_hide_addr(unsigned long address)
-{
- pte_t *pte;
-
- pte = kmemcheck_pte_lookup(address);
- if (!pte)
- return 0;
-
- set_pte(pte, __pte(pte_val(*pte) & ~_PAGE_PRESENT));
- __flush_tlb_one(address);
- return 1;
-}
-
-struct kmemcheck_context {
- bool busy;
- int balance;
-
- /*
- * There can be at most two memory operands to an instruction, but
- * each address can cross a page boundary -- so we may need up to
- * four addresses that must be hidden/revealed for each fault.
- */
- unsigned long addr[4];
- unsigned long n_addrs;
- unsigned long flags;
-
- /* Data size of the instruction that caused a fault. */
- unsigned int size;
-};
-
-static DEFINE_PER_CPU(struct kmemcheck_context, kmemcheck_context);
-
-bool kmemcheck_active(struct pt_regs *regs)
-{
- struct kmemcheck_context *data = this_cpu_ptr(&kmemcheck_context);
-
- return data->balance > 0;
-}
-
-/* Save an address that needs to be shown/hidden */
-static void kmemcheck_save_addr(unsigned long addr)
-{
- struct kmemcheck_context *data = this_cpu_ptr(&kmemcheck_context);
-
- BUG_ON(data->n_addrs >= ARRAY_SIZE(data->addr));
- data->addr[data->n_addrs++] = addr;
-}
-
-static unsigned int kmemcheck_show_all(void)
-{
- struct kmemcheck_context *data = this_cpu_ptr(&kmemcheck_context);
- unsigned int i;
- unsigned int n;
-
- n = 0;
- for (i = 0; i < data->n_addrs; ++i)
- n += kmemcheck_show_addr(data->addr[i]);
-
- return n;
-}
-
-static unsigned int kmemcheck_hide_all(void)
-{
- struct kmemcheck_context *data = this_cpu_ptr(&kmemcheck_context);
- unsigned int i;
- unsigned int n;
-
- n = 0;
- for (i = 0; i < data->n_addrs; ++i)
- n += kmemcheck_hide_addr(data->addr[i]);
-
- return n;
-}
-
-/*
- * Called from the #PF handler.
- */
-void kmemcheck_show(struct pt_regs *regs)
-{
- struct kmemcheck_context *data = this_cpu_ptr(&kmemcheck_context);
-
- BUG_ON(!irqs_disabled());
-
- if (unlikely(data->balance != 0)) {
- kmemcheck_show_all();
- kmemcheck_error_save_bug(regs);
- data->balance = 0;
- return;
- }
-
- /*
- * None of the addresses actually belonged to kmemcheck. Note that
- * this is not an error.
- */
- if (kmemcheck_show_all() == 0)
- return;
-
- ++data->balance;
-
- /*
- * The IF needs to be cleared as well, so that the faulting
- * instruction can run "uninterrupted". Otherwise, we might take
- * an interrupt and start executing that before we've had a chance
- * to hide the page again.
- *
- * NOTE: In the rare case of multiple faults, we must not override
- * the original flags:
- */
- if (!(regs->flags & X86_EFLAGS_TF))
- data->flags = regs->flags;
-
- regs->flags |= X86_EFLAGS_TF;
- regs->flags &= ~X86_EFLAGS_IF;
-}
-
-/*
- * Called from the #DB handler.
- */
-void kmemcheck_hide(struct pt_regs *regs)
-{
- struct kmemcheck_context *data = this_cpu_ptr(&kmemcheck_context);
- int n;
-
- BUG_ON(!irqs_disabled());
-
- if (unlikely(data->balance != 1)) {
- kmemcheck_show_all();
- kmemcheck_error_save_bug(regs);
- data->n_addrs = 0;
- data->balance = 0;
-
- if (!(data->flags & X86_EFLAGS_TF))
- regs->flags &= ~X86_EFLAGS_TF;
- if (data->flags & X86_EFLAGS_IF)
- regs->flags |= X86_EFLAGS_IF;
- return;
- }
-
- if (kmemcheck_enabled)
- n = kmemcheck_hide_all();
- else
- n = kmemcheck_show_all();
-
- if (n == 0)
- return;
-
- --data->balance;
-
- data->n_addrs = 0;
-
- if (!(data->flags & X86_EFLAGS_TF))
- regs->flags &= ~X86_EFLAGS_TF;
- if (data->flags & X86_EFLAGS_IF)
- regs->flags |= X86_EFLAGS_IF;
-}
-
-void kmemcheck_show_pages(struct page *p, unsigned int n)
-{
- unsigned int i;
-
- for (i = 0; i < n; ++i) {
- unsigned long address;
- pte_t *pte;
- unsigned int level;
-
- address = (unsigned long) page_address(&p[i]);
- pte = lookup_address(address, &level);
- BUG_ON(!pte);
- BUG_ON(level != PG_LEVEL_4K);
-
- set_pte(pte, __pte(pte_val(*pte) | _PAGE_PRESENT));
- set_pte(pte, __pte(pte_val(*pte) & ~_PAGE_HIDDEN));
- __flush_tlb_one(address);
- }
-}
-
-bool kmemcheck_page_is_tracked(struct page *p)
-{
- /* This will also check the "hidden" flag of the PTE. */
- return kmemcheck_pte_lookup((unsigned long) page_address(p));
-}
-
-void kmemcheck_hide_pages(struct page *p, unsigned int n)
-{
- unsigned int i;
-
- for (i = 0; i < n; ++i) {
- unsigned long address;
- pte_t *pte;
- unsigned int level;
-
- address = (unsigned long) page_address(&p[i]);
- pte = lookup_address(address, &level);
- BUG_ON(!pte);
- BUG_ON(level != PG_LEVEL_4K);
-
- set_pte(pte, __pte(pte_val(*pte) & ~_PAGE_PRESENT));
- set_pte(pte, __pte(pte_val(*pte) | _PAGE_HIDDEN));
- __flush_tlb_one(address);
- }
-}
-
-/* Access may NOT cross page boundary */
-static void kmemcheck_read_strict(struct pt_regs *regs,
- unsigned long addr, unsigned int size)
-{
- void *shadow;
- enum kmemcheck_shadow status;
-
- shadow = kmemcheck_shadow_lookup(addr);
- if (!shadow)
- return;
-
- kmemcheck_save_addr(addr);
- status = kmemcheck_shadow_test(shadow, size);
- if (status == KMEMCHECK_SHADOW_INITIALIZED)
- return;
-
- if (kmemcheck_enabled)
- kmemcheck_error_save(status, addr, size, regs);
-
- if (kmemcheck_enabled == 2)
- kmemcheck_enabled = 0;
-
- /* Don't warn about it again. */
- kmemcheck_shadow_set(shadow, size);
-}
-
-bool kmemcheck_is_obj_initialized(unsigned long addr, size_t size)
-{
- enum kmemcheck_shadow status;
- void *shadow;
-
- shadow = kmemcheck_shadow_lookup(addr);
- if (!shadow)
- return true;
-
- status = kmemcheck_shadow_test_all(shadow, size);
-
- return status == KMEMCHECK_SHADOW_INITIALIZED;
-}
-
-/* Access may cross page boundary */
-static void kmemcheck_read(struct pt_regs *regs,
- unsigned long addr, unsigned int size)
-{
- unsigned long page = addr & PAGE_MASK;
- unsigned long next_addr = addr + size - 1;
- unsigned long next_page = next_addr & PAGE_MASK;
-
- if (likely(page == next_page)) {
- kmemcheck_read_strict(regs, addr, size);
- return;
- }
-
- /*
- * What we do is basically to split the access across the
- * two pages and handle each part separately. Yes, this means
- * that we may now see reads that are 3 + 5 bytes, for
- * example (and if both are uninitialized, there will be two
- * reports), but it makes the code a lot simpler.
- */
- kmemcheck_read_strict(regs, addr, next_page - addr);
- kmemcheck_read_strict(regs, next_page, next_addr - next_page);
-}
-
-static void kmemcheck_write_strict(struct pt_regs *regs,
- unsigned long addr, unsigned int size)
-{
- void *shadow;
-
- shadow = kmemcheck_shadow_lookup(addr);
- if (!shadow)
- return;
-
- kmemcheck_save_addr(addr);
- kmemcheck_shadow_set(shadow, size);
-}
-
-static void kmemcheck_write(struct pt_regs *regs,
- unsigned long addr, unsigned int size)
-{
- unsigned long page = addr & PAGE_MASK;
- unsigned long next_addr = addr + size - 1;
- unsigned long next_page = next_addr & PAGE_MASK;
-
- if (likely(page == next_page)) {
- kmemcheck_write_strict(regs, addr, size);
- return;
- }
-
- /* See comment in kmemcheck_read(). */
- kmemcheck_write_strict(regs, addr, next_page - addr);
- kmemcheck_write_strict(regs, next_page, next_addr - next_page);
-}
-
-/*
- * Copying is hard. We have two addresses, each of which may be split across
- * a page (and each page will have different shadow addresses).
- */
-static void kmemcheck_copy(struct pt_regs *regs,
- unsigned long src_addr, unsigned long dst_addr, unsigned int size)
-{
- uint8_t shadow[8];
- enum kmemcheck_shadow status;
-
- unsigned long page;
- unsigned long next_addr;
- unsigned long next_page;
-
- uint8_t *x;
- unsigned int i;
- unsigned int n;
-
- BUG_ON(size > sizeof(shadow));
-
- page = src_addr & PAGE_MASK;
- next_addr = src_addr + size - 1;
- next_page = next_addr & PAGE_MASK;
-
- if (likely(page == next_page)) {
- /* Same page */
- x = kmemcheck_shadow_lookup(src_addr);
- if (x) {
- kmemcheck_save_addr(src_addr);
- for (i = 0; i < size; ++i)
- shadow[i] = x[i];
- } else {
- for (i = 0; i < size; ++i)
- shadow[i] = KMEMCHECK_SHADOW_INITIALIZED;
- }
- } else {
- n = next_page - src_addr;
- BUG_ON(n > sizeof(shadow));
-
- /* First page */
- x = kmemcheck_shadow_lookup(src_addr);
- if (x) {
- kmemcheck_save_addr(src_addr);
- for (i = 0; i < n; ++i)
- shadow[i] = x[i];
- } else {
- /* Not tracked */
- for (i = 0; i < n; ++i)
- shadow[i] = KMEMCHECK_SHADOW_INITIALIZED;
- }
-
- /* Second page */
- x = kmemcheck_shadow_lookup(next_page);
- if (x) {
- kmemcheck_save_addr(next_page);
- for (i = n; i < size; ++i)
- shadow[i] = x[i - n];
- } else {
- /* Not tracked */
- for (i = n; i < size; ++i)
- shadow[i] = KMEMCHECK_SHADOW_INITIALIZED;
- }
- }
-
- page = dst_addr & PAGE_MASK;
- next_addr = dst_addr + size - 1;
- next_page = next_addr & PAGE_MASK;
-
- if (likely(page == next_page)) {
- /* Same page */
- x = kmemcheck_shadow_lookup(dst_addr);
- if (x) {
- kmemcheck_save_addr(dst_addr);
- for (i = 0; i < size; ++i) {
- x[i] = shadow[i];
- shadow[i] = KMEMCHECK_SHADOW_INITIALIZED;
- }
- }
- } else {
- n = next_page - dst_addr;
- BUG_ON(n > sizeof(shadow));
-
- /* First page */
- x = kmemcheck_shadow_lookup(dst_addr);
- if (x) {
- kmemcheck_save_addr(dst_addr);
- for (i = 0; i < n; ++i) {
- x[i] = shadow[i];
- shadow[i] = KMEMCHECK_SHADOW_INITIALIZED;
- }
- }
-
- /* Second page */
- x = kmemcheck_shadow_lookup(next_page);
- if (x) {
- kmemcheck_save_addr(next_page);
- for (i = n; i < size; ++i) {
- x[i - n] = shadow[i];
- shadow[i] = KMEMCHECK_SHADOW_INITIALIZED;
- }
- }
- }
-
- status = kmemcheck_shadow_test(shadow, size);
- if (status == KMEMCHECK_SHADOW_INITIALIZED)
- return;
-
- if (kmemcheck_enabled)
- kmemcheck_error_save(status, src_addr, size, regs);
-
- if (kmemcheck_enabled == 2)
- kmemcheck_enabled = 0;
-}
-
-enum kmemcheck_method {
- KMEMCHECK_READ,
- KMEMCHECK_WRITE,
-};
-
-static void kmemcheck_access(struct pt_regs *regs,
- unsigned long fallback_address, enum kmemcheck_method fallback_method)
-{
- const uint8_t *insn;
- const uint8_t *insn_primary;
- unsigned int size;
-
- struct kmemcheck_context *data = this_cpu_ptr(&kmemcheck_context);
-
- /* Recursive fault -- ouch. */
- if (data->busy) {
- kmemcheck_show_addr(fallback_address);
- kmemcheck_error_save_bug(regs);
- return;
- }
-
- data->busy = true;
-
- insn = (const uint8_t *) regs->ip;
- insn_primary = kmemcheck_opcode_get_primary(insn);
-
- kmemcheck_opcode_decode(insn, &size);
-
- switch (insn_primary[0]) {
-#ifdef CONFIG_KMEMCHECK_BITOPS_OK
- /* AND, OR, XOR */
- /*
- * Unfortunately, these instructions have to be excluded from
- * our regular checking since they access only some (and not
- * all) bits. This clears out "bogus" bitfield-access warnings.
- */
- case 0x80:
- case 0x81:
- case 0x82:
- case 0x83:
- switch ((insn_primary[1] >> 3) & 7) {
- /* OR */
- case 1:
- /* AND */
- case 4:
- /* XOR */
- case 6:
- kmemcheck_write(regs, fallback_address, size);
- goto out;
-
- /* ADD */
- case 0:
- /* ADC */
- case 2:
- /* SBB */
- case 3:
- /* SUB */
- case 5:
- /* CMP */
- case 7:
- break;
- }
- break;
-#endif
-
- /* MOVS, MOVSB, MOVSW, MOVSD */
- case 0xa4:
- case 0xa5:
- /*
- * These instructions are special because they take two
- * addresses, but we only get one page fault.
- */
- kmemcheck_copy(regs, regs->si, regs->di, size);
- goto out;
-
- /* CMPS, CMPSB, CMPSW, CMPSD */
- case 0xa6:
- case 0xa7:
- kmemcheck_read(regs, regs->si, size);
- kmemcheck_read(regs, regs->di, size);
- goto out;
- }
-
- /*
- * If the opcode isn't special in any way, we use the data from the
- * page fault handler to determine the address and type of memory
- * access.
- */
- switch (fallback_method) {
- case KMEMCHECK_READ:
- kmemcheck_read(regs, fallback_address, size);
- goto out;
- case KMEMCHECK_WRITE:
- kmemcheck_write(regs, fallback_address, size);
- goto out;
- }
-
-out:
- data->busy = false;
-}
-
-bool kmemcheck_fault(struct pt_regs *regs, unsigned long address,
- unsigned long error_code)
-{
- pte_t *pte;
-
- /*
- * XXX: Is it safe to assume that memory accesses from virtual 86
- * mode or non-kernel code segments will _never_ access kernel
- * memory (e.g. tracked pages)? For now, we need this to avoid
- * invoking kmemcheck for PnP BIOS calls.
- */
- if (regs->flags & X86_VM_MASK)
- return false;
- if (regs->cs != __KERNEL_CS)
- return false;
-
- pte = kmemcheck_pte_lookup(address);
- if (!pte)
- return false;
-
- WARN_ON_ONCE(in_nmi());
-
- if (error_code & 2)
- kmemcheck_access(regs, address, KMEMCHECK_WRITE);
- else
- kmemcheck_access(regs, address, KMEMCHECK_READ);
-
- kmemcheck_show(regs);
- return true;
-}
-
-bool kmemcheck_trap(struct pt_regs *regs)
-{
- if (!kmemcheck_active(regs))
- return false;
-
- /* We're done. */
- kmemcheck_hide(regs);
- return true;
-}
--- a/arch/x86/mm/kmemcheck/opcode.c
+++ b/arch/x86/mm/kmemcheck/opcode.c
@@ -1,107 +1 @@
// SPDX-License-Identifier: GPL-2.0
-#include <linux/types.h>
-
-#include "opcode.h"
-
-static bool opcode_is_prefix(uint8_t b)
-{
- return
- /* Group 1 */
- b == 0xf0 || b == 0xf2 || b == 0xf3
- /* Group 2 */
- || b == 0x2e || b == 0x36 || b == 0x3e || b == 0x26
- || b == 0x64 || b == 0x65
- /* Group 3 */
- || b == 0x66
- /* Group 4 */
- || b == 0x67;
-}
-
-#ifdef CONFIG_X86_64
-static bool opcode_is_rex_prefix(uint8_t b)
-{
- return (b & 0xf0) == 0x40;
-}
-#else
-static bool opcode_is_rex_prefix(uint8_t b)
-{
- return false;
-}
-#endif
-
-#define REX_W (1 << 3)
-
-/*
- * This is a VERY crude opcode decoder. We only need to find the size of the
- * load/store that caused our #PF and this should work for all the opcodes
- * that we care about. Moreover, the ones who invented this instruction set
- * should be shot.
- */
-void kmemcheck_opcode_decode(const uint8_t *op, unsigned int *size)
-{
- /* Default operand size */
- int operand_size_override = 4;
-
- /* prefixes */
- for (; opcode_is_prefix(*op); ++op) {
- if (*op == 0x66)
- operand_size_override = 2;
- }
-
- /* REX prefix */
- if (opcode_is_rex_prefix(*op)) {
- uint8_t rex = *op;
-
- ++op;
- if (rex & REX_W) {
- switch (*op) {
- case 0x63:
- *size = 4;
- return;
- case 0x0f:
- ++op;
-
- switch (*op) {
- case 0xb6:
- case 0xbe:
- *size = 1;
- return;
- case 0xb7:
- case 0xbf:
- *size = 2;
- return;
- }
-
- break;
- }
-
- *size = 8;
- return;
- }
- }
-
- /* escape opcode */
- if (*op == 0x0f) {
- ++op;
-
- /*
- * This is move with zero-extend and sign-extend, respectively;
- * we don't have to think about 0xb6/0xbe, because this is
- * already handled in the conditional below.
- */
- if (*op == 0xb7 || *op == 0xbf)
- operand_size_override = 2;
- }
-
- *size = (*op & 1) ? operand_size_override : 1;
-}
-
-const uint8_t *kmemcheck_opcode_get_primary(const uint8_t *op)
-{
- /* skip prefixes */
- while (opcode_is_prefix(*op))
- ++op;
- if (opcode_is_rex_prefix(*op))
- ++op;
- return op;
-}
--- a/arch/x86/mm/kmemcheck/opcode.h
+++ b/arch/x86/mm/kmemcheck/opcode.h
@@ -1,10 +1 @@
/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef ARCH__X86__MM__KMEMCHECK__OPCODE_H
-#define ARCH__X86__MM__KMEMCHECK__OPCODE_H
-
-#include <linux/types.h>
-
-void kmemcheck_opcode_decode(const uint8_t *op, unsigned int *size);
-const uint8_t *kmemcheck_opcode_get_primary(const uint8_t *op);
-
-#endif
--- a/arch/x86/mm/kmemcheck/pte.c
+++ b/arch/x86/mm/kmemcheck/pte.c
@@ -1,23 +1 @@
// SPDX-License-Identifier: GPL-2.0
-#include <linux/mm.h>
-
-#include <asm/pgtable.h>
-
-#include "pte.h"
-
-pte_t *kmemcheck_pte_lookup(unsigned long address)
-{
- pte_t *pte;
- unsigned int level;
-
- pte = lookup_address(address, &level);
- if (!pte)
- return NULL;
- if (level != PG_LEVEL_4K)
- return NULL;
- if (!pte_hidden(*pte))
- return NULL;
-
- return pte;
-}
-
--- a/arch/x86/mm/kmemcheck/pte.h
+++ b/arch/x86/mm/kmemcheck/pte.h
@@ -1,11 +1 @@
/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef ARCH__X86__MM__KMEMCHECK__PTE_H
-#define ARCH__X86__MM__KMEMCHECK__PTE_H
-
-#include <linux/mm.h>
-
-#include <asm/pgtable.h>
-
-pte_t *kmemcheck_pte_lookup(unsigned long address);
-
-#endif
--- a/arch/x86/mm/kmemcheck/selftest.c
+++ b/arch/x86/mm/kmemcheck/selftest.c
@@ -1,71 +1 @@
// SPDX-License-Identifier: GPL-2.0
-#include <linux/bug.h>
-#include <linux/kernel.h>
-
-#include "opcode.h"
-#include "selftest.h"
-
-struct selftest_opcode {
- unsigned int expected_size;
- const uint8_t *insn;
- const char *desc;
-};
-
-static const struct selftest_opcode selftest_opcodes[] = {
- /* REP MOVS */
- {1, "\xf3\xa4", "rep movsb <mem8>, <mem8>"},
- {4, "\xf3\xa5", "rep movsl <mem32>, <mem32>"},
-
- /* MOVZX / MOVZXD */
- {1, "\x66\x0f\xb6\x51\xf8", "movzwq <mem8>, <reg16>"},
- {1, "\x0f\xb6\x51\xf8", "movzwq <mem8>, <reg32>"},
-
- /* MOVSX / MOVSXD */
- {1, "\x66\x0f\xbe\x51\xf8", "movswq <mem8>, <reg16>"},
- {1, "\x0f\xbe\x51\xf8", "movswq <mem8>, <reg32>"},
-
-#ifdef CONFIG_X86_64
- /* MOVZX / MOVZXD */
- {1, "\x49\x0f\xb6\x51\xf8", "movzbq <mem8>, <reg64>"},
- {2, "\x49\x0f\xb7\x51\xf8", "movzbq <mem16>, <reg64>"},
-
- /* MOVSX / MOVSXD */
- {1, "\x49\x0f\xbe\x51\xf8", "movsbq <mem8>, <reg64>"},
- {2, "\x49\x0f\xbf\x51\xf8", "movsbq <mem16>, <reg64>"},
- {4, "\x49\x63\x51\xf8", "movslq <mem32>, <reg64>"},
-#endif
-};
-
-static bool selftest_opcode_one(const struct selftest_opcode *op)
-{
- unsigned size;
-
- kmemcheck_opcode_decode(op->insn, &size);
-
- if (size == op->expected_size)
- return true;
-
- printk(KERN_WARNING "kmemcheck: opcode %s: expected size %d, got %d\n",
- op->desc, op->expected_size, size);
- return false;
-}
-
-static bool selftest_opcodes_all(void)
-{
- bool pass = true;
- unsigned int i;
-
- for (i = 0; i < ARRAY_SIZE(selftest_opcodes); ++i)
- pass = pass && selftest_opcode_one(&selftest_opcodes[i]);
-
- return pass;
-}
-
-bool kmemcheck_selftest(void)
-{
- bool pass = true;
-
- pass = pass && selftest_opcodes_all();
-
- return pass;
-}
--- a/arch/x86/mm/kmemcheck/selftest.h
+++ b/arch/x86/mm/kmemcheck/selftest.h
@@ -1,7 +1 @@
/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef ARCH_X86_MM_KMEMCHECK_SELFTEST_H
-#define ARCH_X86_MM_KMEMCHECK_SELFTEST_H
-
-bool kmemcheck_selftest(void);
-
-#endif
--- a/arch/x86/mm/kmemcheck/shadow.c
+++ /dev/null
@@ -1,173 +0,0 @@
-#include <linux/kmemcheck.h>
-#include <linux/export.h>
-#include <linux/mm.h>
-
-#include <asm/page.h>
-#include <asm/pgtable.h>
-
-#include "pte.h"
-#include "shadow.h"
-
-/*
- * Return the shadow address for the given address. Returns NULL if the
- * address is not tracked.
- *
- * We need to be extremely careful not to follow any invalid pointers,
- * because this function can be called for *any* possible address.
- */
-void *kmemcheck_shadow_lookup(unsigned long address)
-{
- pte_t *pte;
- struct page *page;
-
- if (!virt_addr_valid(address))
- return NULL;
-
- pte = kmemcheck_pte_lookup(address);
- if (!pte)
- return NULL;
-
- page = virt_to_page(address);
- if (!page->shadow)
- return NULL;
- return page->shadow + (address & (PAGE_SIZE - 1));
-}
-
-static void mark_shadow(void *address, unsigned int n,
- enum kmemcheck_shadow status)
-{
- unsigned long addr = (unsigned long) address;
- unsigned long last_addr = addr + n - 1;
- unsigned long page = addr & PAGE_MASK;
- unsigned long last_page = last_addr & PAGE_MASK;
- unsigned int first_n;
- void *shadow;
-
- /* If the memory range crosses a page boundary, stop there. */
- if (page == last_page)
- first_n = n;
- else
- first_n = page + PAGE_SIZE - addr;
-
- shadow = kmemcheck_shadow_lookup(addr);
- if (shadow)
- memset(shadow, status, first_n);
-
- addr += first_n;
- n -= first_n;
-
- /* Do full-page memset()s. */
- while (n >= PAGE_SIZE) {
- shadow = kmemcheck_shadow_lookup(addr);
- if (shadow)
- memset(shadow, status, PAGE_SIZE);
-
- addr += PAGE_SIZE;
- n -= PAGE_SIZE;
- }
-
- /* Do the remaining page, if any. */
- if (n > 0) {
- shadow = kmemcheck_shadow_lookup(addr);
- if (shadow)
- memset(shadow, status, n);
- }
-}
-
-void kmemcheck_mark_unallocated(void *address, unsigned int n)
-{
- mark_shadow(address, n, KMEMCHECK_SHADOW_UNALLOCATED);
-}
-
-void kmemcheck_mark_uninitialized(void *address, unsigned int n)
-{
- mark_shadow(address, n, KMEMCHECK_SHADOW_UNINITIALIZED);
-}
-
-/*
- * Fill the shadow memory of the given address such that the memory at that
- * address is marked as being initialized.
- */
-void kmemcheck_mark_initialized(void *address, unsigned int n)
-{
- mark_shadow(address, n, KMEMCHECK_SHADOW_INITIALIZED);
-}
-EXPORT_SYMBOL_GPL(kmemcheck_mark_initialized);
-
-void kmemcheck_mark_freed(void *address, unsigned int n)
-{
- mark_shadow(address, n, KMEMCHECK_SHADOW_FREED);
-}
-
-void kmemcheck_mark_unallocated_pages(struct page *p, unsigned int n)
-{
- unsigned int i;
-
- for (i = 0; i < n; ++i)
- kmemcheck_mark_unallocated(page_address(&p[i]), PAGE_SIZE);
-}
-
-void kmemcheck_mark_uninitialized_pages(struct page *p, unsigned int n)
-{
- unsigned int i;
-
- for (i = 0; i < n; ++i)
- kmemcheck_mark_uninitialized(page_address(&p[i]), PAGE_SIZE);
-}
-
-void kmemcheck_mark_initialized_pages(struct page *p, unsigned int n)
-{
- unsigned int i;
-
- for (i = 0; i < n; ++i)
- kmemcheck_mark_initialized(page_address(&p[i]), PAGE_SIZE);
-}
-
-enum kmemcheck_shadow kmemcheck_shadow_test(void *shadow, unsigned int size)
-{
-#ifdef CONFIG_KMEMCHECK_PARTIAL_OK
- uint8_t *x;
- unsigned int i;
-
- x = shadow;
-
- /*
- * Make sure _some_ bytes are initialized. Gcc frequently generates
- * code to access neighboring bytes.
- */
- for (i = 0; i < size; ++i) {
- if (x[i] == KMEMCHECK_SHADOW_INITIALIZED)
- return x[i];
- }
-
- return x[0];
-#else
- return kmemcheck_shadow_test_all(shadow, size);
-#endif
-}
-
-enum kmemcheck_shadow kmemcheck_shadow_test_all(void *shadow, unsigned int size)
-{
- uint8_t *x;
- unsigned int i;
-
- x = shadow;
-
- /* All bytes must be initialized. */
- for (i = 0; i < size; ++i) {
- if (x[i] != KMEMCHECK_SHADOW_INITIALIZED)
- return x[i];
- }
-
- return x[0];
-}
-
-void kmemcheck_shadow_set(void *shadow, unsigned int size)
-{
- uint8_t *x;
- unsigned int i;
-
- x = shadow;
- for (i = 0; i < size; ++i)
- x[i] = KMEMCHECK_SHADOW_INITIALIZED;
-}
--- a/arch/x86/mm/kmemcheck/shadow.h
+++ b/arch/x86/mm/kmemcheck/shadow.h
@@ -1,19 +1 @@
/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef ARCH__X86__MM__KMEMCHECK__SHADOW_H
-#define ARCH__X86__MM__KMEMCHECK__SHADOW_H
-
-enum kmemcheck_shadow {
- KMEMCHECK_SHADOW_UNALLOCATED,
- KMEMCHECK_SHADOW_UNINITIALIZED,
- KMEMCHECK_SHADOW_INITIALIZED,
- KMEMCHECK_SHADOW_FREED,
-};
-
-void *kmemcheck_shadow_lookup(unsigned long address);
-
-enum kmemcheck_shadow kmemcheck_shadow_test(void *shadow, unsigned int size);
-enum kmemcheck_shadow kmemcheck_shadow_test_all(void *shadow,
- unsigned int size);
-void kmemcheck_shadow_set(void *shadow, unsigned int size);
-
-#endif
--- a/include/linux/interrupt.h
+++ b/include/linux/interrupt.h
@@ -594,21 +594,6 @@ static inline void tasklet_hi_schedule(s
__tasklet_hi_schedule(t);
}
-extern void __tasklet_hi_schedule_first(struct tasklet_struct *t);
-
-/*
- * This version avoids touching any other tasklets. Needed for kmemcheck
- * in order not to take any page faults while enqueueing this tasklet;
- * consider VERY carefully whether you really need this or
- * tasklet_hi_schedule()...
- */
-static inline void tasklet_hi_schedule_first(struct tasklet_struct *t)
-{
- if (!test_and_set_bit(TASKLET_STATE_SCHED, &t->state))
- __tasklet_hi_schedule_first(t);
-}
-
-
static inline void tasklet_disable_nosync(struct tasklet_struct *t)
{
atomic_inc(&t->count);
--- a/include/linux/kmemcheck.h
+++ b/include/linux/kmemcheck.h
@@ -1,172 +1 @@
/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef LINUX_KMEMCHECK_H
-#define LINUX_KMEMCHECK_H
-
-#include <linux/mm_types.h>
-#include <linux/types.h>
-
-#ifdef CONFIG_KMEMCHECK
-extern int kmemcheck_enabled;
-
-/* The slab-related functions. */
-void kmemcheck_alloc_shadow(struct page *page, int order, gfp_t flags, int node);
-void kmemcheck_free_shadow(struct page *page, int order);
-void kmemcheck_slab_alloc(struct kmem_cache *s, gfp_t gfpflags, void *object,
- size_t size);
-void kmemcheck_slab_free(struct kmem_cache *s, void *object, size_t size);
-
-void kmemcheck_pagealloc_alloc(struct page *p, unsigned int order,
- gfp_t gfpflags);
-
-void kmemcheck_show_pages(struct page *p, unsigned int n);
-void kmemcheck_hide_pages(struct page *p, unsigned int n);
-
-bool kmemcheck_page_is_tracked(struct page *p);
-
-void kmemcheck_mark_unallocated(void *address, unsigned int n);
-void kmemcheck_mark_uninitialized(void *address, unsigned int n);
-void kmemcheck_mark_initialized(void *address, unsigned int n);
-void kmemcheck_mark_freed(void *address, unsigned int n);
-
-void kmemcheck_mark_unallocated_pages(struct page *p, unsigned int n);
-void kmemcheck_mark_uninitialized_pages(struct page *p, unsigned int n);
-void kmemcheck_mark_initialized_pages(struct page *p, unsigned int n);
-
-int kmemcheck_show_addr(unsigned long address);
-int kmemcheck_hide_addr(unsigned long address);
-
-bool kmemcheck_is_obj_initialized(unsigned long addr, size_t size);
-
-/*
- * Bitfield annotations
- *
- * How to use: If you have a struct using bitfields, for example
- *
- * struct a {
- * int x:8, y:8;
- * };
- *
- * then this should be rewritten as
- *
- * struct a {
- * kmemcheck_bitfield_begin(flags);
- * int x:8, y:8;
- * kmemcheck_bitfield_end(flags);
- * };
- *
- * Now the "flags_begin" and "flags_end" members may be used to refer to the
- * beginning and end, respectively, of the bitfield (and things like
- * &x.flags_begin is allowed). As soon as the struct is allocated, the bit-
- * fields should be annotated:
- *
- * struct a *a = kmalloc(sizeof(struct a), GFP_KERNEL);
- * kmemcheck_annotate_bitfield(a, flags);
- */
-#define kmemcheck_bitfield_begin(name) \
- int name##_begin[0];
-
-#define kmemcheck_bitfield_end(name) \
- int name##_end[0];
-
-#define kmemcheck_annotate_bitfield(ptr, name) \
- do { \
- int _n; \
- \
- if (!ptr) \
- break; \
- \
- _n = (long) &((ptr)->name##_end) \
- - (long) &((ptr)->name##_begin); \
- BUILD_BUG_ON(_n < 0); \
- \
- kmemcheck_mark_initialized(&((ptr)->name##_begin), _n); \
- } while (0)
-
-#define kmemcheck_annotate_variable(var) \
- do { \
- kmemcheck_mark_initialized(&(var), sizeof(var)); \
- } while (0) \
-
-#else
-#define kmemcheck_enabled 0
-
-static inline void
-kmemcheck_alloc_shadow(struct page *page, int order, gfp_t flags, int node)
-{
-}
-
-static inline void
-kmemcheck_free_shadow(struct page *page, int order)
-{
-}
-
-static inline void
-kmemcheck_slab_alloc(struct kmem_cache *s, gfp_t gfpflags, void *object,
- size_t size)
-{
-}
-
-static inline void kmemcheck_slab_free(struct kmem_cache *s, void *object,
- size_t size)
-{
-}
-
-static inline void kmemcheck_pagealloc_alloc(struct page *p,
- unsigned int order, gfp_t gfpflags)
-{
-}
-
-static inline bool kmemcheck_page_is_tracked(struct page *p)
-{
- return false;
-}
-
-static inline void kmemcheck_mark_unallocated(void *address, unsigned int n)
-{
-}
-
-static inline void kmemcheck_mark_uninitialized(void *address, unsigned int n)
-{
-}
-
-static inline void kmemcheck_mark_initialized(void *address, unsigned int n)
-{
-}
-
-static inline void kmemcheck_mark_freed(void *address, unsigned int n)
-{
-}
-
-static inline void kmemcheck_mark_unallocated_pages(struct page *p,
- unsigned int n)
-{
-}
-
-static inline void kmemcheck_mark_uninitialized_pages(struct page *p,
- unsigned int n)
-{
-}
-
-static inline void kmemcheck_mark_initialized_pages(struct page *p,
- unsigned int n)
-{
-}
-
-static inline bool kmemcheck_is_obj_initialized(unsigned long addr, size_t size)
-{
- return true;
-}
-
-#define kmemcheck_bitfield_begin(name)
-#define kmemcheck_bitfield_end(name)
-#define kmemcheck_annotate_bitfield(ptr, name) \
- do { \
- } while (0)
-
-#define kmemcheck_annotate_variable(var) \
- do { \
- } while (0)
-
-#endif /* CONFIG_KMEMCHECK */
-
-#endif /* LINUX_KMEMCHECK_H */
--- a/kernel/softirq.c
+++ b/kernel/softirq.c
@@ -486,16 +486,6 @@ void __tasklet_hi_schedule(struct taskle
}
EXPORT_SYMBOL(__tasklet_hi_schedule);
-void __tasklet_hi_schedule_first(struct tasklet_struct *t)
-{
- BUG_ON(!irqs_disabled());
-
- t->next = __this_cpu_read(tasklet_hi_vec.head);
- __this_cpu_write(tasklet_hi_vec.head, t);
- __raise_softirq_irqoff(HI_SOFTIRQ);
-}
-EXPORT_SYMBOL(__tasklet_hi_schedule_first);
-
static __latent_entropy void tasklet_action(struct softirq_action *a)
{
struct tasklet_struct *list;
--- a/kernel/sysctl.c
+++ b/kernel/sysctl.c
@@ -30,7 +30,6 @@
#include <linux/proc_fs.h>
#include <linux/security.h>
#include <linux/ctype.h>
-#include <linux/kmemcheck.h>
#include <linux/kmemleak.h>
#include <linux/fs.h>
#include <linux/init.h>
@@ -1174,15 +1173,6 @@ static struct ctl_table kern_table[] = {
.extra2 = &one_thousand,
},
#endif
-#ifdef CONFIG_KMEMCHECK
- {
- .procname = "kmemcheck",
- .data = &kmemcheck_enabled,
- .maxlen = sizeof(int),
- .mode = 0644,
- .proc_handler = proc_dointvec,
- },
-#endif
{
.procname = "panic_on_warn",
.data = &panic_on_warn,
--- a/lib/Kconfig.debug
+++ b/lib/Kconfig.debug
@@ -504,7 +504,7 @@ config DEBUG_OBJECTS_ENABLE_DEFAULT
config DEBUG_SLAB
bool "Debug slab memory allocations"
- depends on DEBUG_KERNEL && SLAB && !KMEMCHECK
+ depends on DEBUG_KERNEL && SLAB
help
Say Y here to have the kernel do limited verification on memory
allocation as well as poisoning memory on free to catch use of freed
@@ -516,7 +516,7 @@ config DEBUG_SLAB_LEAK
config SLUB_DEBUG_ON
bool "SLUB debugging on by default"
- depends on SLUB && SLUB_DEBUG && !KMEMCHECK
+ depends on SLUB && SLUB_DEBUG
default n
help
Boot with debugging on by default. SLUB boots by default with
@@ -730,8 +730,6 @@ config DEBUG_STACKOVERFLOW
If in doubt, say "N".
-source "lib/Kconfig.kmemcheck"
-
source "lib/Kconfig.kasan"
endmenu # "Memory Debugging"
--- a/lib/Kconfig.kmemcheck
+++ /dev/null
@@ -1,94 +0,0 @@
-config HAVE_ARCH_KMEMCHECK
- bool
-
-if HAVE_ARCH_KMEMCHECK
-
-menuconfig KMEMCHECK
- bool "kmemcheck: trap use of uninitialized memory"
- depends on DEBUG_KERNEL
- depends on !X86_USE_3DNOW
- depends on SLUB || SLAB
- depends on !CC_OPTIMIZE_FOR_SIZE
- depends on !FUNCTION_TRACER
- select FRAME_POINTER
- select STACKTRACE
- default n
- help
- This option enables tracing of dynamically allocated kernel memory
- to see if memory is used before it has been given an initial value.
- Be aware that this requires half of your memory for bookkeeping and
- will insert extra code at *every* read and write to tracked memory
- thus slow down the kernel code (but user code is unaffected).
-
- The kernel may be started with kmemcheck=0 or kmemcheck=1 to disable
- or enable kmemcheck at boot-time. If the kernel is started with
- kmemcheck=0, the large memory and CPU overhead is not incurred.
-
-choice
- prompt "kmemcheck: default mode at boot"
- depends on KMEMCHECK
- default KMEMCHECK_ONESHOT_BY_DEFAULT
- help
- This option controls the default behaviour of kmemcheck when the
- kernel boots and no kmemcheck= parameter is given.
-
-config KMEMCHECK_DISABLED_BY_DEFAULT
- bool "disabled"
- depends on KMEMCHECK
-
-config KMEMCHECK_ENABLED_BY_DEFAULT
- bool "enabled"
- depends on KMEMCHECK
-
-config KMEMCHECK_ONESHOT_BY_DEFAULT
- bool "one-shot"
- depends on KMEMCHECK
- help
- In one-shot mode, only the first error detected is reported before
- kmemcheck is disabled.
-
-endchoice
-
-config KMEMCHECK_QUEUE_SIZE
- int "kmemcheck: error queue size"
- depends on KMEMCHECK
- default 64
- help
- Select the maximum number of errors to store in the queue. Since
- errors can occur virtually anywhere and in any context, we need a
- temporary storage area which is guarantueed not to generate any
- other faults. The queue will be emptied as soon as a tasklet may
- be scheduled. If the queue is full, new error reports will be
- lost.
-
-config KMEMCHECK_SHADOW_COPY_SHIFT
- int "kmemcheck: shadow copy size (5 => 32 bytes, 6 => 64 bytes)"
- depends on KMEMCHECK
- range 2 8
- default 5
- help
- Select the number of shadow bytes to save along with each entry of
- the queue. These bytes indicate what parts of an allocation are
- initialized, uninitialized, etc. and will be displayed when an
- error is detected to help the debugging of a particular problem.
-
-config KMEMCHECK_PARTIAL_OK
- bool "kmemcheck: allow partially uninitialized memory"
- depends on KMEMCHECK
- default y
- help
- This option works around certain GCC optimizations that produce
- 32-bit reads from 16-bit variables where the upper 16 bits are
- thrown away afterwards. This may of course also hide some real
- bugs.
-
-config KMEMCHECK_BITOPS_OK
- bool "kmemcheck: allow bit-field manipulation"
- depends on KMEMCHECK
- default n
- help
- This option silences warnings that would be generated for bit-field
- accesses where not all the bits are initialized at the same time.
- This may also hide some real bugs.
-
-endif
--- a/mm/Kconfig.debug
+++ b/mm/Kconfig.debug
@@ -11,7 +11,6 @@ config DEBUG_PAGEALLOC
bool "Debug page memory allocations"
depends on DEBUG_KERNEL
depends on !HIBERNATION || ARCH_SUPPORTS_DEBUG_PAGEALLOC && !PPC && !SPARC
- depends on !KMEMCHECK
select PAGE_EXTENSION
select PAGE_POISONING if !ARCH_SUPPORTS_DEBUG_PAGEALLOC
---help---
--- a/mm/Makefile
+++ b/mm/Makefile
@@ -17,7 +17,6 @@ KCOV_INSTRUMENT_slub.o := n
KCOV_INSTRUMENT_page_alloc.o := n
KCOV_INSTRUMENT_debug-pagealloc.o := n
KCOV_INSTRUMENT_kmemleak.o := n
-KCOV_INSTRUMENT_kmemcheck.o := n
KCOV_INSTRUMENT_memcontrol.o := n
KCOV_INSTRUMENT_mmzone.o := n
KCOV_INSTRUMENT_vmstat.o := n
@@ -70,7 +69,6 @@ obj-$(CONFIG_KSM) += ksm.o
obj-$(CONFIG_PAGE_POISONING) += page_poison.o
obj-$(CONFIG_SLAB) += slab.o
obj-$(CONFIG_SLUB) += slub.o
-obj-$(CONFIG_KMEMCHECK) += kmemcheck.o
obj-$(CONFIG_KASAN) += kasan/
obj-$(CONFIG_FAILSLAB) += failslab.o
obj-$(CONFIG_MEMORY_HOTPLUG) += memory_hotplug.o
--- a/mm/kmemcheck.c
+++ b/mm/kmemcheck.c
@@ -1,126 +1 @@
// SPDX-License-Identifier: GPL-2.0
-#include <linux/gfp.h>
-#include <linux/mm_types.h>
-#include <linux/mm.h>
-#include <linux/slab.h>
-#include "slab.h"
-#include <linux/kmemcheck.h>
-
-void kmemcheck_alloc_shadow(struct page *page, int order, gfp_t flags, int node)
-{
- struct page *shadow;
- int pages;
- int i;
-
- pages = 1 << order;
-
- /*
- * With kmemcheck enabled, we need to allocate a memory area for the
- * shadow bits as well.
- */
- shadow = alloc_pages_node(node, flags, order);
- if (!shadow) {
- if (printk_ratelimit())
- pr_err("kmemcheck: failed to allocate shadow bitmap\n");
- return;
- }
-
- for(i = 0; i < pages; ++i)
- page[i].shadow = page_address(&shadow[i]);
-
- /*
- * Mark it as non-present for the MMU so that our accesses to
- * this memory will trigger a page fault and let us analyze
- * the memory accesses.
- */
- kmemcheck_hide_pages(page, pages);
-}
-
-void kmemcheck_free_shadow(struct page *page, int order)
-{
- struct page *shadow;
- int pages;
- int i;
-
- if (!kmemcheck_page_is_tracked(page))
- return;
-
- pages = 1 << order;
-
- kmemcheck_show_pages(page, pages);
-
- shadow = virt_to_page(page[0].shadow);
-
- for(i = 0; i < pages; ++i)
- page[i].shadow = NULL;
-
- __free_pages(shadow, order);
-}
-
-void kmemcheck_slab_alloc(struct kmem_cache *s, gfp_t gfpflags, void *object,
- size_t size)
-{
- if (unlikely(!object)) /* Skip object if allocation failed */
- return;
-
- /*
- * Has already been memset(), which initializes the shadow for us
- * as well.
- */
- if (gfpflags & __GFP_ZERO)
- return;
-
- /* No need to initialize the shadow of a non-tracked slab. */
- if (s->flags & SLAB_NOTRACK)
- return;
-
- if (!kmemcheck_enabled || gfpflags & __GFP_NOTRACK) {
- /*
- * Allow notracked objects to be allocated from
- * tracked caches. Note however that these objects
- * will still get page faults on access, they just
- * won't ever be flagged as uninitialized. If page
- * faults are not acceptable, the slab cache itself
- * should be marked NOTRACK.
- */
- kmemcheck_mark_initialized(object, size);
- } else if (!s->ctor) {
- /*
- * New objects should be marked uninitialized before
- * they're returned to the called.
- */
- kmemcheck_mark_uninitialized(object, size);
- }
-}
-
-void kmemcheck_slab_free(struct kmem_cache *s, void *object, size_t size)
-{
- /* TODO: RCU freeing is unsupported for now; hide false positives. */
- if (!s->ctor && !(s->flags & SLAB_TYPESAFE_BY_RCU))
- kmemcheck_mark_freed(object, size);
-}
-
-void kmemcheck_pagealloc_alloc(struct page *page, unsigned int order,
- gfp_t gfpflags)
-{
- int pages;
-
- if (gfpflags & (__GFP_HIGHMEM | __GFP_NOTRACK))
- return;
-
- pages = 1 << order;
-
- /*
- * NOTE: We choose to track GFP_ZERO pages too; in fact, they
- * can become uninitialized by copying uninitialized memory
- * into them.
- */
-
- /* XXX: Can use zone->node for node? */
- kmemcheck_alloc_shadow(page, order, gfpflags, -1);
-
- if (gfpflags & __GFP_ZERO)
- kmemcheck_mark_initialized_pages(page, pages);
- else
- kmemcheck_mark_uninitialized_pages(page, pages);
-}
--- a/mm/slub.c
+++ b/mm/slub.c
@@ -1369,7 +1369,7 @@ static inline void *slab_free_hook(struc
* So in order to make the debug calls that expect irqs to be
* disabled we need to disable interrupts temporarily.
*/
-#if defined(CONFIG_KMEMCHECK) || defined(CONFIG_LOCKDEP)
+#ifdef CONFIG_LOCKDEP
{
unsigned long flags;
@@ -1397,8 +1397,7 @@ static inline void slab_free_freelist_ho
* Compiler cannot detect this function can be removed if slab_free_hook()
* evaluates to nothing. Thus, catch all relevant config debug options here.
*/
-#if defined(CONFIG_KMEMCHECK) || \
- defined(CONFIG_LOCKDEP) || \
+#if defined(CONFIG_LOCKDEP) || \
defined(CONFIG_DEBUG_KMEMLEAK) || \
defined(CONFIG_DEBUG_OBJECTS_FREE) || \
defined(CONFIG_KASAN)
--- a/scripts/kernel-doc
+++ b/scripts/kernel-doc
@@ -2182,8 +2182,6 @@ sub dump_struct($$) {
# strip comments:
$members =~ s/\/\*.*?\*\///gos;
$nested =~ s/\/\*.*?\*\///gos;
- # strip kmemcheck_bitfield_{begin,end}.*;
- $members =~ s/kmemcheck_bitfield_.*?;//gos;
# strip attributes
$members =~ s/__attribute__\s*\(\([a-z,_\*\s\(\)]*\)\)//i;
$members =~ s/__aligned\s*\([^;]*\)//gos;
--- a/tools/include/linux/kmemcheck.h
+++ b/tools/include/linux/kmemcheck.h
@@ -1,9 +1 @@
/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef _LIBLOCKDEP_LINUX_KMEMCHECK_H_
-#define _LIBLOCKDEP_LINUX_KMEMCHECK_H_
-
-static inline void kmemcheck_mark_initialized(void *address, unsigned int n)
-{
-}
-
-#endif
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Lucas De Marchi <[email protected]>
commit 33aa69ed8aacd92dea12671e52eb3ca6ac2d7a49 upstream.
CFL was missing from intel_early_ids[]. The PCI ID needs to be there to
allow the memory region to be stolen, otherwise we could have RAM being
arbitrarily overwritten if for example we keep using the UEFI framebuffer,
depending on how BIOS has set up the e820 map.
Fixes: b056f8f3d6b9 ("drm/i915/cfl: Add Coffee Lake PCI IDs for S Skus.")
Signed-off-by: Lucas De Marchi <[email protected]>
Cc: Rodrigo Vivi <[email protected]>
Cc: Anusha Srivatsa <[email protected]>
Cc: Jani Nikula <[email protected]>
Cc: Joonas Lahtinen <[email protected]>
Cc: David Airlie <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: Ingo Molnar <[email protected]>
Cc: H. Peter Anvin <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: [email protected]
Cc: <[email protected]> # v4.13+ 0890540e21cf drm/i915: add GT number to intel_device_info
Cc: <[email protected]> # v4.13+ 41693fd52373 drm/i915/kbl: Change a KBL pci id to GT2 from GT1.5
Cc: <[email protected]> # v4.13+
Reviewed-by: Rodrigo Vivi <[email protected]>
Acked-by: Jani Nikula <[email protected]>
Acked-by: Ingo Molnar <[email protected]>
Signed-off-by: Rodrigo Vivi <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/kernel/early-quirks.c | 1 +
include/drm/i915_pciids.h | 6 ++++++
2 files changed, 7 insertions(+)
--- a/arch/x86/kernel/early-quirks.c
+++ b/arch/x86/kernel/early-quirks.c
@@ -527,6 +527,7 @@ static const struct pci_device_id intel_
INTEL_SKL_IDS(&gen9_early_ops),
INTEL_BXT_IDS(&gen9_early_ops),
INTEL_KBL_IDS(&gen9_early_ops),
+ INTEL_CFL_IDS(&gen9_early_ops),
INTEL_GLK_IDS(&gen9_early_ops),
INTEL_CNL_IDS(&gen9_early_ops),
};
--- a/include/drm/i915_pciids.h
+++ b/include/drm/i915_pciids.h
@@ -392,6 +392,12 @@
INTEL_VGA_DEVICE(0x3EA8, info), /* ULT GT3 */ \
INTEL_VGA_DEVICE(0x3EA5, info) /* ULT GT3 */
+#define INTEL_CFL_IDS(info) \
+ INTEL_CFL_S_GT1_IDS(info), \
+ INTEL_CFL_S_GT2_IDS(info), \
+ INTEL_CFL_H_GT2_IDS(info), \
+ INTEL_CFL_U_GT3_IDS(info)
+
/* CNL U 2+2 */
#define INTEL_CNL_U_GT2_IDS(info) \
INTEL_VGA_DEVICE(0x5A52, info), \
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Andrey Grodzovsky <[email protected]>
commit adab595d16abe48e9c097f000bf8921d35b28fb7 upstream.
The handle describes kernel logical address, should be
unsigned long and not uint32_t.
Fixes KASAN error and GFP on driver unload.
Reviewed-by: Rex Zhu <[email protected]>
Reviewed-by: Alex Deucher <[email protected]>
Signed-off-by: Andrey Grodzovsky <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
Cc: [email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpu/drm/amd/powerplay/smumgr/rv_smumgr.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/gpu/drm/amd/powerplay/smumgr/rv_smumgr.h
+++ b/drivers/gpu/drm/amd/powerplay/smumgr/rv_smumgr.h
@@ -40,7 +40,7 @@ struct smu_table_entry {
uint32_t table_addr_high;
uint32_t table_addr_low;
uint8_t *table;
- uint32_t handle;
+ unsigned long handle;
};
struct smu_table_array {
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Levin, Alexander (Sasha Levin) <[email protected]>
commit d8be75663cec0069b85f80191abd2682ce4a512f upstream.
Now that kmemcheck is gone, we don't need the NOTRACK flags.
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
Cc: Alexander Potapenko <[email protected]>
Cc: Eric W. Biederman <[email protected]>
Cc: Michal Hocko <[email protected]>
Cc: Pekka Enberg <[email protected]>
Cc: Steven Rostedt <[email protected]>
Cc: Tim Hansen <[email protected]>
Cc: Vegard Nossum <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/include/asm/pgtable.h | 5 -----
arch/x86/include/asm/pgtable_types.h | 13 -------------
include/linux/gfp.h | 9 ---------
include/linux/slab.h | 6 ------
include/trace/events/mmflags.h | 1 -
mm/slub.c | 2 --
tools/perf/builtin-kmem.c | 1 -
7 files changed, 37 deletions(-)
--- a/arch/x86/include/asm/pgtable.h
+++ b/arch/x86/include/asm/pgtable.h
@@ -668,11 +668,6 @@ static inline bool pte_accessible(struct
return false;
}
-static inline int pte_hidden(pte_t pte)
-{
- return pte_flags(pte) & _PAGE_HIDDEN;
-}
-
static inline int pmd_present(pmd_t pmd)
{
/*
--- a/arch/x86/include/asm/pgtable_types.h
+++ b/arch/x86/include/asm/pgtable_types.h
@@ -32,7 +32,6 @@
#define _PAGE_BIT_SPECIAL _PAGE_BIT_SOFTW1
#define _PAGE_BIT_CPA_TEST _PAGE_BIT_SOFTW1
-#define _PAGE_BIT_HIDDEN _PAGE_BIT_SOFTW3 /* hidden by kmemcheck */
#define _PAGE_BIT_SOFT_DIRTY _PAGE_BIT_SOFTW3 /* software dirty tracking */
#define _PAGE_BIT_DEVMAP _PAGE_BIT_SOFTW4
@@ -79,18 +78,6 @@
#define _PAGE_KNL_ERRATUM_MASK 0
#endif
-#ifdef CONFIG_KMEMCHECK
-#define _PAGE_HIDDEN (_AT(pteval_t, 1) << _PAGE_BIT_HIDDEN)
-#else
-#define _PAGE_HIDDEN (_AT(pteval_t, 0))
-#endif
-
-/*
- * The same hidden bit is used by kmemcheck, but since kmemcheck
- * works on kernel pages while soft-dirty engine on user space,
- * they do not conflict with each other.
- */
-
#ifdef CONFIG_MEM_SOFT_DIRTY
#define _PAGE_SOFT_DIRTY (_AT(pteval_t, 1) << _PAGE_BIT_SOFT_DIRTY)
#else
--- a/include/linux/gfp.h
+++ b/include/linux/gfp.h
@@ -37,7 +37,6 @@ struct vm_area_struct;
#define ___GFP_THISNODE 0x40000u
#define ___GFP_ATOMIC 0x80000u
#define ___GFP_ACCOUNT 0x100000u
-#define ___GFP_NOTRACK 0x200000u
#define ___GFP_DIRECT_RECLAIM 0x400000u
#define ___GFP_WRITE 0x800000u
#define ___GFP_KSWAPD_RECLAIM 0x1000000u
@@ -201,19 +200,11 @@ struct vm_area_struct;
* __GFP_COMP address compound page metadata.
*
* __GFP_ZERO returns a zeroed page on success.
- *
- * __GFP_NOTRACK avoids tracking with kmemcheck.
- *
- * __GFP_NOTRACK_FALSE_POSITIVE is an alias of __GFP_NOTRACK. It's a means of
- * distinguishing in the source between false positives and allocations that
- * cannot be supported (e.g. page tables).
*/
#define __GFP_COLD ((__force gfp_t)___GFP_COLD)
#define __GFP_NOWARN ((__force gfp_t)___GFP_NOWARN)
#define __GFP_COMP ((__force gfp_t)___GFP_COMP)
#define __GFP_ZERO ((__force gfp_t)___GFP_ZERO)
-#define __GFP_NOTRACK ((__force gfp_t)___GFP_NOTRACK)
-#define __GFP_NOTRACK_FALSE_POSITIVE (__GFP_NOTRACK)
/* Disable lockdep for GFP context tracking */
#define __GFP_NOLOCKDEP ((__force gfp_t)___GFP_NOLOCKDEP)
--- a/include/linux/slab.h
+++ b/include/linux/slab.h
@@ -78,12 +78,6 @@
#define SLAB_NOLEAKTRACE 0x00800000UL /* Avoid kmemleak tracing */
-/* Don't track use of uninitialized memory */
-#ifdef CONFIG_KMEMCHECK
-# define SLAB_NOTRACK 0x01000000UL
-#else
-# define SLAB_NOTRACK 0x00000000UL
-#endif
#ifdef CONFIG_FAILSLAB
# define SLAB_FAILSLAB 0x02000000UL /* Fault injection mark */
#else
--- a/include/trace/events/mmflags.h
+++ b/include/trace/events/mmflags.h
@@ -46,7 +46,6 @@
{(unsigned long)__GFP_RECLAIMABLE, "__GFP_RECLAIMABLE"}, \
{(unsigned long)__GFP_MOVABLE, "__GFP_MOVABLE"}, \
{(unsigned long)__GFP_ACCOUNT, "__GFP_ACCOUNT"}, \
- {(unsigned long)__GFP_NOTRACK, "__GFP_NOTRACK"}, \
{(unsigned long)__GFP_WRITE, "__GFP_WRITE"}, \
{(unsigned long)__GFP_RECLAIM, "__GFP_RECLAIM"}, \
{(unsigned long)__GFP_DIRECT_RECLAIM, "__GFP_DIRECT_RECLAIM"},\
--- a/mm/slub.c
+++ b/mm/slub.c
@@ -5633,8 +5633,6 @@ static char *create_unique_id(struct kme
*p++ = 'a';
if (s->flags & SLAB_CONSISTENCY_CHECKS)
*p++ = 'F';
- if (!(s->flags & SLAB_NOTRACK))
- *p++ = 't';
if (s->flags & SLAB_ACCOUNT)
*p++ = 'A';
if (p != name + 1)
--- a/tools/perf/builtin-kmem.c
+++ b/tools/perf/builtin-kmem.c
@@ -655,7 +655,6 @@ static const struct {
{ "__GFP_RECLAIMABLE", "RC" },
{ "__GFP_MOVABLE", "M" },
{ "__GFP_ACCOUNT", "AC" },
- { "__GFP_NOTRACK", "NT" },
{ "__GFP_WRITE", "WR" },
{ "__GFP_RECLAIM", "R" },
{ "__GFP_DIRECT_RECLAIM", "DR" },
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Dominik Brodowski <[email protected]>
commit 4105c69703cdeba76f384b901712c9397b04e9c2 upstream.
On 64-bit builds, we should not rely on "int $0x80" working (it only does if
CONFIG_IA32_EMULATION=y is enabled). To keep the "Set TF and check int80"
test running on 64-bit installs with CONFIG_IA32_EMULATION=y enabled, build
this test only if we can also build 32-bit binaries (which should be a
good approximation for that).
Signed-off-by: Dominik Brodowski <[email protected]>
Cc: Andy Lutomirski <[email protected]>
Cc: Dmitry Safonov <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: [email protected]
Cc: [email protected]
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Ingo Molnar <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
tools/testing/selftests/x86/Makefile | 2 ++
tools/testing/selftests/x86/single_step_syscall.c | 5 ++++-
2 files changed, 6 insertions(+), 1 deletion(-)
--- a/tools/testing/selftests/x86/Makefile
+++ b/tools/testing/selftests/x86/Makefile
@@ -30,11 +30,13 @@ CAN_BUILD_X86_64 := $(shell ./check_cc.s
ifeq ($(CAN_BUILD_I386),1)
all: all_32
TEST_PROGS += $(BINARIES_32)
+EXTRA_CFLAGS += -DCAN_BUILD_32
endif
ifeq ($(CAN_BUILD_X86_64),1)
all: all_64
TEST_PROGS += $(BINARIES_64)
+EXTRA_CFLAGS += -DCAN_BUILD_64
endif
all_32: $(BINARIES_32)
--- a/tools/testing/selftests/x86/single_step_syscall.c
+++ b/tools/testing/selftests/x86/single_step_syscall.c
@@ -119,7 +119,9 @@ static void check_result(void)
int main()
{
+#ifdef CAN_BUILD_32
int tmp;
+#endif
sethandler(SIGTRAP, sigtrap, 0);
@@ -139,12 +141,13 @@ int main()
: : "c" (post_nop) : "r11");
check_result();
#endif
-
+#ifdef CAN_BUILD_32
printf("[RUN]\tSet TF and check int80\n");
set_eflags(get_eflags() | X86_EFLAGS_TF);
asm volatile ("int $0x80" : "=a" (tmp) : "a" (SYS_getpid)
: INT80_CLOBBERS);
check_result();
+#endif
/*
* This test is particularly interesting if fast syscalls use
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Phil Elwell <[email protected]>
commit 118032be389009b07ecb5a03ffe219a89d421def upstream.
The optional DT parameter max-frequency could init the max bus frequency.
So take care of this, before setting the max bus frequency.
Fixes: 660fc733bd74 ("mmc: bcm2835: Add new driver for the sdhost controller.")
Signed-off-by: Phil Elwell <[email protected]>
Signed-off-by: Stefan Wahren <[email protected]>
Cc: <[email protected]> # 4.12+
Signed-off-by: Ulf Hansson <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/mmc/host/bcm2835.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/drivers/mmc/host/bcm2835.c
+++ b/drivers/mmc/host/bcm2835.c
@@ -1265,7 +1265,8 @@ static int bcm2835_add_host(struct bcm28
char pio_limit_string[20];
int ret;
- mmc->f_max = host->max_clk;
+ if (!mmc->f_max || mmc->f_max > host->max_clk)
+ mmc->f_max = host->max_clk;
mmc->f_min = host->max_clk / SDCDIV_MAX_CDIV;
mmc->max_busy_timeout = ~0 / (mmc->f_max / 1000);
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Gustavo A. R. Silva <[email protected]>
commit 24dbc6000f4b9b0ef5a9daecb161f1907733765a upstream.
Currently, x86_cache_size is of type int, which makes no sense as we
will never have a valid cache size equal or less than 0. So instead of
initializing this variable to -1, it can perfectly be initialized to 0
and use it as an unsigned variable instead.
Suggested-by: Thomas Gleixner <[email protected]>
Signed-off-by: Gustavo A. R. Silva <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Addresses-Coverity-ID: 1464429
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Ingo Molnar <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/include/asm/processor.h | 2 +-
arch/x86/kernel/cpu/common.c | 2 +-
arch/x86/kernel/cpu/microcode/intel.c | 2 +-
arch/x86/kernel/cpu/proc.c | 4 ++--
4 files changed, 5 insertions(+), 5 deletions(-)
--- a/arch/x86/include/asm/processor.h
+++ b/arch/x86/include/asm/processor.h
@@ -109,7 +109,7 @@ struct cpuinfo_x86 {
char x86_vendor_id[16];
char x86_model_id[64];
/* in KB - valid for CPUS which support this call: */
- int x86_cache_size;
+ unsigned int x86_cache_size;
int x86_cache_alignment; /* In bytes */
/* Cache QoS architectural values: */
int x86_cache_max_rmid; /* max index */
--- a/arch/x86/kernel/cpu/common.c
+++ b/arch/x86/kernel/cpu/common.c
@@ -1160,7 +1160,7 @@ static void identify_cpu(struct cpuinfo_
int i;
c->loops_per_jiffy = loops_per_jiffy;
- c->x86_cache_size = -1;
+ c->x86_cache_size = 0;
c->x86_vendor = X86_VENDOR_UNKNOWN;
c->x86_model = c->x86_stepping = 0; /* So far unknown... */
c->x86_vendor_id[0] = '\0'; /* Unset */
--- a/arch/x86/kernel/cpu/microcode/intel.c
+++ b/arch/x86/kernel/cpu/microcode/intel.c
@@ -982,7 +982,7 @@ static struct microcode_ops microcode_in
static int __init calc_llc_size_per_core(struct cpuinfo_x86 *c)
{
- u64 llc_size = c->x86_cache_size * 1024;
+ u64 llc_size = c->x86_cache_size * 1024ULL;
do_div(llc_size, c->x86_max_cores);
--- a/arch/x86/kernel/cpu/proc.c
+++ b/arch/x86/kernel/cpu/proc.c
@@ -91,8 +91,8 @@ static int show_cpuinfo(struct seq_file
}
/* Cache size */
- if (c->x86_cache_size >= 0)
- seq_printf(m, "cache size\t: %d KB\n", c->x86_cache_size);
+ if (c->x86_cache_size)
+ seq_printf(m, "cache size\t: %u KB\n", c->x86_cache_size);
show_cpuinfo_core(m, c, cpu);
show_cpuinfo_misc(m, c);
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Sagi Grimberg <[email protected]>
commit 2572cf57d75a7f91835d9a38771e9e76d575d122 upstream.
The consumers of this routine expects the affinity map of of vector
index relative to the first completion vector. The upper layers are
not aware of internal/private completion vectors that mlx5 allocates
for its own usage.
Hence, return the affinity map of vector index relative to the first
completion vector.
Fixes: 05e0cc84e00c ("net/mlx5: Fix get vector affinity helper function")
Reported-by: Logan Gunthorpe <[email protected]>
Tested-by: Max Gurtovoy <[email protected]>
Reviewed-by: Max Gurtovoy <[email protected]>
Cc: <[email protected]> # v4.15
Signed-off-by: Sagi Grimberg <[email protected]>
Signed-off-by: Doug Ledford <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
include/linux/mlx5/driver.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/include/linux/mlx5/driver.h
+++ b/include/linux/mlx5/driver.h
@@ -1201,7 +1201,7 @@ mlx5_get_vector_affinity(struct mlx5_cor
int eqn;
int err;
- err = mlx5_vector2eqn(dev, vector, &eqn, &irq);
+ err = mlx5_vector2eqn(dev, MLX5_EQ_VEC_COMP_BASE + vector, &eqn, &irq);
if (err)
return NULL;
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Harshad Shirwadkar <[email protected]>
commit abbc3f9395c76d554a9ed27d4b1ebfb5d9b0e4ca upstream.
This patch fixes a race between the shutdown path and bio completion
handling. In the ext4 direct io path with async io, after submitting a
bio to the block layer, if journal starting fails,
ext4_direct_IO_write() would bail out pretending that the IO
failed. The caller would have had no way of knowing whether or not the
IO was successfully submitted. So instead, we return -EIOCBQUEUED in
this case. Now, the caller knows that the IO was submitted. The bio
completion handler takes care of the error.
Tested: Ran the shutdown xfstest test 461 in loop for over 2 hours across
4 machines resulting in over 400 runs. Verified that the race didn't
occur. Usually the race was seen in about 20-30 iterations.
Signed-off-by: Harshad Shirwadkar <[email protected]>
Signed-off-by: Theodore Ts'o <[email protected]>
Cc: [email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/ext4/inode.c | 16 ++++++++++++----
1 file changed, 12 insertions(+), 4 deletions(-)
--- a/fs/ext4/inode.c
+++ b/fs/ext4/inode.c
@@ -3724,10 +3724,18 @@ static ssize_t ext4_direct_IO_write(stru
/* Credits for sb + inode write */
handle = ext4_journal_start(inode, EXT4_HT_INODE, 2);
if (IS_ERR(handle)) {
- /* This is really bad luck. We've written the data
- * but cannot extend i_size. Bail out and pretend
- * the write failed... */
- ret = PTR_ERR(handle);
+ /*
+ * We wrote the data but cannot extend
+ * i_size. Bail out. In async io case, we do
+ * not return error here because we have
+ * already submmitted the corresponding
+ * bio. Returning error here makes the caller
+ * think that this IO is done and failed
+ * resulting in race with bio's completion
+ * handler.
+ */
+ if (!ret)
+ ret = PTR_ERR(handle);
if (inode->i_nlink)
ext4_orphan_del(NULL, inode);
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Dominik Brodowski <[email protected]>
commit 9279ddf23ce78ff2676e8e8e19fec0f022c26d04 upstream.
The ldt_gdt and ptrace_syscall selftests, even in their 64-bit variant, use
hard-coded 32-bit syscall numbers and call "int $0x80".
This will fail on 64-bit systems with CONFIG_IA32_EMULATION=y disabled.
Therefore, do not build these tests if we cannot build 32-bit binaries
(which should be a good approximation for CONFIG_IA32_EMULATION=y being enabled).
Signed-off-by: Dominik Brodowski <[email protected]>
Cc: Andy Lutomirski <[email protected]>
Cc: Dmitry Safonov <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: [email protected]
Cc: [email protected]
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Ingo Molnar <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
tools/testing/selftests/x86/Makefile | 20 +++++++++++++-------
1 file changed, 13 insertions(+), 7 deletions(-)
--- a/tools/testing/selftests/x86/Makefile
+++ b/tools/testing/selftests/x86/Makefile
@@ -5,16 +5,26 @@ include ../lib.mk
.PHONY: all all_32 all_64 warn_32bit_failure clean
-TARGETS_C_BOTHBITS := single_step_syscall sysret_ss_attrs syscall_nt ptrace_syscall test_mremap_vdso \
- check_initial_reg_state sigreturn ldt_gdt iopl mpx-mini-test ioperm \
+UNAME_M := $(shell uname -m)
+CAN_BUILD_I386 := $(shell ./check_cc.sh $(CC) trivial_32bit_program.c -m32)
+CAN_BUILD_X86_64 := $(shell ./check_cc.sh $(CC) trivial_64bit_program.c)
+
+TARGETS_C_BOTHBITS := single_step_syscall sysret_ss_attrs syscall_nt test_mremap_vdso \
+ check_initial_reg_state sigreturn iopl mpx-mini-test ioperm \
protection_keys test_vdso test_vsyscall
TARGETS_C_32BIT_ONLY := entry_from_vm86 syscall_arg_fault test_syscall_vdso unwind_vdso \
test_FCMOV test_FCOMI test_FISTTP \
vdso_restorer
TARGETS_C_64BIT_ONLY := fsgsbase sysret_rip
+# Some selftests require 32bit support enabled also on 64bit systems
+TARGETS_C_32BIT_NEEDED := ldt_gdt ptrace_syscall
-TARGETS_C_32BIT_ALL := $(TARGETS_C_BOTHBITS) $(TARGETS_C_32BIT_ONLY)
+TARGETS_C_32BIT_ALL := $(TARGETS_C_BOTHBITS) $(TARGETS_C_32BIT_ONLY) $(TARGETS_C_32BIT_NEEDED)
TARGETS_C_64BIT_ALL := $(TARGETS_C_BOTHBITS) $(TARGETS_C_64BIT_ONLY)
+ifeq ($(CAN_BUILD_I386)$(CAN_BUILD_X86_64),11)
+TARGETS_C_64BIT_ALL += $(TARGETS_C_32BIT_NEEDED)
+endif
+
BINARIES_32 := $(TARGETS_C_32BIT_ALL:%=%_32)
BINARIES_64 := $(TARGETS_C_64BIT_ALL:%=%_64)
@@ -23,10 +33,6 @@ BINARIES_64 := $(patsubst %,$(OUTPUT)/%,
CFLAGS := -O2 -g -std=gnu99 -pthread -Wall -no-pie
-UNAME_M := $(shell uname -m)
-CAN_BUILD_I386 := $(shell ./check_cc.sh $(CC) trivial_32bit_program.c -m32)
-CAN_BUILD_X86_64 := $(shell ./check_cc.sh $(CC) trivial_64bit_program.c)
-
ifeq ($(CAN_BUILD_I386),1)
all: all_32
TEST_PROGS += $(BINARIES_32)
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Will Deacon <[email protected]>
commit 2ce77f6d8a9ae9ce6d80397d88bdceb84a2004cd upstream.
When KASAN is enabled, the swapper page table contains many identical
mappings of the zero page, which can lead to a stall during boot whilst
the G -> nG code continually walks the same page table entries looking
for global mappings.
This patch sets the nG bit (bit 11, which is IGNORED) in table entries
after processing the subtree so we can easily skip them if we see them
a second time.
Tested-by: Mark Rutland <[email protected]>
Signed-off-by: Will Deacon <[email protected]>
Signed-off-by: Catalin Marinas <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/arm64/mm/proc.S | 14 +++++++++-----
1 file changed, 9 insertions(+), 5 deletions(-)
--- a/arch/arm64/mm/proc.S
+++ b/arch/arm64/mm/proc.S
@@ -190,7 +190,8 @@ ENDPROC(idmap_cpu_replace_ttbr1)
dc cvac, cur_\()\type\()p // Ensure any existing dirty
dmb sy // lines are written back before
ldr \type, [cur_\()\type\()p] // loading the entry
- tbz \type, #0, next_\()\type // Skip invalid entries
+ tbz \type, #0, skip_\()\type // Skip invalid and
+ tbnz \type, #11, skip_\()\type // non-global entries
.endm
.macro __idmap_kpti_put_pgtable_ent_ng, type
@@ -249,8 +250,9 @@ ENTRY(idmap_kpti_install_ng_mappings)
add end_pgdp, cur_pgdp, #(PTRS_PER_PGD * 8)
do_pgd: __idmap_kpti_get_pgtable_ent pgd
tbnz pgd, #1, walk_puds
- __idmap_kpti_put_pgtable_ent_ng pgd
next_pgd:
+ __idmap_kpti_put_pgtable_ent_ng pgd
+skip_pgd:
add cur_pgdp, cur_pgdp, #8
cmp cur_pgdp, end_pgdp
b.ne do_pgd
@@ -278,8 +280,9 @@ walk_puds:
add end_pudp, cur_pudp, #(PTRS_PER_PUD * 8)
do_pud: __idmap_kpti_get_pgtable_ent pud
tbnz pud, #1, walk_pmds
- __idmap_kpti_put_pgtable_ent_ng pud
next_pud:
+ __idmap_kpti_put_pgtable_ent_ng pud
+skip_pud:
add cur_pudp, cur_pudp, 8
cmp cur_pudp, end_pudp
b.ne do_pud
@@ -298,8 +301,9 @@ walk_pmds:
add end_pmdp, cur_pmdp, #(PTRS_PER_PMD * 8)
do_pmd: __idmap_kpti_get_pgtable_ent pmd
tbnz pmd, #1, walk_ptes
- __idmap_kpti_put_pgtable_ent_ng pmd
next_pmd:
+ __idmap_kpti_put_pgtable_ent_ng pmd
+skip_pmd:
add cur_pmdp, cur_pmdp, #8
cmp cur_pmdp, end_pmdp
b.ne do_pmd
@@ -317,7 +321,7 @@ walk_ptes:
add end_ptep, cur_ptep, #(PTRS_PER_PTE * 8)
do_pte: __idmap_kpti_get_pgtable_ent pte
__idmap_kpti_put_pgtable_ent_ng pte
-next_pte:
+skip_pte:
add cur_ptep, cur_ptep, #8
cmp cur_ptep, end_ptep
b.ne do_pte
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: David Disseldorp <[email protected]>
commit ce512d79d0466a604793addb6b769d12ee326822 upstream.
If chap_server_compute_md5() fails early, e.g. via CHAP_N mismatch, then
crypto_free_shash() is called with a NULL pointer which gets
dereferenced in crypto_shash_tfm().
Fixes: 69110e3cedbb ("iscsi-target: Use shash and ahash")
Suggested-by: Markus Elfring <[email protected]>
Signed-off-by: David Disseldorp <[email protected]>
Cc: [email protected] # 4.6+
Signed-off-by: Nicholas Bellinger <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/target/iscsi/iscsi_target_auth.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/drivers/target/iscsi/iscsi_target_auth.c
+++ b/drivers/target/iscsi/iscsi_target_auth.c
@@ -421,7 +421,8 @@ static int chap_server_compute_md5(
auth_ret = 0;
out:
kzfree(desc);
- crypto_free_shash(tfm);
+ if (tfm)
+ crypto_free_shash(tfm);
kfree(challenge);
kfree(challenge_binhex);
return auth_ret;
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Arnd Bergmann <[email protected]>
commit af27d9403f5b80685b79c88425086edccecaf711 upstream.
We get a warning about some slow configurations in randconfig kernels:
mm/memory.c:83:2: error: #warning Unfortunate NUMA and NUMA Balancing config, growing page-frame for last_cpupid. [-Werror=cpp]
The warning is reasonable by itself, but gets in the way of randconfig
build testing, so I'm hiding it whenever CONFIG_COMPILE_TEST is set.
The warning was added in 2013 in commit 75980e97dacc ("mm: fold
page->_last_nid into page->flags where possible").
Cc: [email protected]
Signed-off-by: Arnd Bergmann <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
mm/memory.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/mm/memory.c
+++ b/mm/memory.c
@@ -81,7 +81,7 @@
#include "internal.h"
-#ifdef LAST_CPUPID_NOT_IN_PAGE_FLAGS
+#if defined(LAST_CPUPID_NOT_IN_PAGE_FLAGS) && !defined(CONFIG_COMPILE_TEST)
#warning Unfortunate NUMA and NUMA Balancing config, growing page-frame for last_cpupid.
#endif
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Dongdong Liu <[email protected]>
commit deb86999323661c019ef2740eb9d479d1e526b5c upstream.
HiSilicon Hip06/Hip07 can operate as either a Root Port or an Endpoint. It
always advertises an MSI capability, but it can only generate MSIs when in
Endpoint mode.
The device has the same Vendor and Device IDs in both modes, so check the
Class Code and disable MSI only when operating as a Root Port.
[bhelgaas: changelog]
Fixes: 72f2ff0deb87 ("PCI: Disable MSI for HiSilicon Hip06/Hip07 Root Ports")
Signed-off-by: Dongdong Liu <[email protected]>
Signed-off-by: Bjorn Helgaas <[email protected]>
Reviewed-by: Zhou Wang <[email protected]>
Cc: [email protected] # v4.11+
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/pci/quirks.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -1636,8 +1636,8 @@ static void quirk_pcie_mch(struct pci_de
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_E7520_MCH, quirk_pcie_mch);
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_E7320_MCH, quirk_pcie_mch);
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_E7525_MCH, quirk_pcie_mch);
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_HUAWEI, 0x1610, quirk_pcie_mch);
+DECLARE_PCI_FIXUP_CLASS_FINAL(PCI_VENDOR_ID_HUAWEI, 0x1610, PCI_CLASS_BRIDGE_PCI, 8, quirk_pcie_mch);
/*
* It's possible for the MSI to get corrupted if shpc and acpi
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Corentin Labbe <[email protected]>
commit 2e6522c565522a2e18409c315c49d78c8b74807b upstream.
MIPS_GENERIC selects some options conditional on BIG_ENDIAN which does
not exist.
Replace BIG_ENDIAN with CPU_BIG_ENDIAN which is the correct kconfig
name. Note that BMIPS_GENERIC does the same which confirms that this
patch is needed.
Fixes: eed0eabd12ef0 ("MIPS: generic: Introduce generic DT-based board support")
Signed-off-by: Corentin Labbe <[email protected]>
Reviewed-by: James Hogan <[email protected]>
Cc: Ralf Baechle <[email protected]>
Cc: [email protected]
Cc: <[email protected]> # 4.9+
Patchwork: https://patchwork.linux-mips.org/patch/18495/
[[email protected]: Clean up commit message]
Signed-off-by: James Hogan <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/mips/Kconfig | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -119,12 +119,12 @@ config MIPS_GENERIC
select SYS_SUPPORTS_MULTITHREADING
select SYS_SUPPORTS_RELOCATABLE
select SYS_SUPPORTS_SMARTMIPS
- select USB_EHCI_BIG_ENDIAN_DESC if BIG_ENDIAN
- select USB_EHCI_BIG_ENDIAN_MMIO if BIG_ENDIAN
- select USB_OHCI_BIG_ENDIAN_DESC if BIG_ENDIAN
- select USB_OHCI_BIG_ENDIAN_MMIO if BIG_ENDIAN
- select USB_UHCI_BIG_ENDIAN_DESC if BIG_ENDIAN
- select USB_UHCI_BIG_ENDIAN_MMIO if BIG_ENDIAN
+ select USB_EHCI_BIG_ENDIAN_DESC if CPU_BIG_ENDIAN
+ select USB_EHCI_BIG_ENDIAN_MMIO if CPU_BIG_ENDIAN
+ select USB_OHCI_BIG_ENDIAN_DESC if CPU_BIG_ENDIAN
+ select USB_OHCI_BIG_ENDIAN_MMIO if CPU_BIG_ENDIAN
+ select USB_UHCI_BIG_ENDIAN_DESC if CPU_BIG_ENDIAN
+ select USB_UHCI_BIG_ENDIAN_MMIO if CPU_BIG_ENDIAN
select USE_OF
help
Select this to build a kernel which aims to support multiple boards,
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Tobin C. Harding <[email protected]>
commit f69120ce6c024aa634a8fc25787205e42f0ccbe6 upstream.
Sphinx emits various (26) warnings when building make target 'htmldocs'.
Currently struct definitions contain duplicate documentation, some as
kernel-docs and some as standard c89 comments. We can reduce
duplication while cleaning up the kernel docs.
Move all kernel-docs to right above each struct member. Use the set of
all existing comments (kernel-doc and c89). Add documentation for
missing struct members and function arguments.
Signed-off-by: Tobin C. Harding <[email protected]>
Signed-off-by: Theodore Ts'o <[email protected]>
Cc: [email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/jbd2/transaction.c | 5
include/linux/jbd2.h | 431 +++++++++++++++++++++++++++++++-------------------
2 files changed, 272 insertions(+), 164 deletions(-)
--- a/fs/jbd2/transaction.c
+++ b/fs/jbd2/transaction.c
@@ -495,8 +495,10 @@ void jbd2_journal_free_reserved(handle_t
EXPORT_SYMBOL(jbd2_journal_free_reserved);
/**
- * int jbd2_journal_start_reserved(handle_t *handle) - start reserved handle
+ * int jbd2_journal_start_reserved() - start reserved handle
* @handle: handle to start
+ * @type: for handle statistics
+ * @line_no: for handle statistics
*
* Start handle that has been previously reserved with jbd2_journal_reserve().
* This attaches @handle to the running transaction (or creates one if there's
@@ -626,6 +628,7 @@ error_out:
* int jbd2_journal_restart() - restart a handle .
* @handle: handle to restart
* @nblocks: nr credits requested
+ * @gfp_mask: memory allocation flags (for start_this_handle)
*
* Restart a handle for a multi-transaction filesystem
* operation.
--- a/include/linux/jbd2.h
+++ b/include/linux/jbd2.h
@@ -418,26 +418,41 @@ static inline void jbd_unlock_bh_journal
#define JI_WAIT_DATA (1 << __JI_WAIT_DATA)
/**
- * struct jbd_inode is the structure linking inodes in ordered mode
- * present in a transaction so that we can sync them during commit.
+ * struct jbd_inode - The jbd_inode type is the structure linking inodes in
+ * ordered mode present in a transaction so that we can sync them during commit.
*/
struct jbd2_inode {
- /* Which transaction does this inode belong to? Either the running
- * transaction or the committing one. [j_list_lock] */
+ /**
+ * @i_transaction:
+ *
+ * Which transaction does this inode belong to? Either the running
+ * transaction or the committing one. [j_list_lock]
+ */
transaction_t *i_transaction;
- /* Pointer to the running transaction modifying inode's data in case
- * there is already a committing transaction touching it. [j_list_lock] */
+ /**
+ * @i_next_transaction:
+ *
+ * Pointer to the running transaction modifying inode's data in case
+ * there is already a committing transaction touching it. [j_list_lock]
+ */
transaction_t *i_next_transaction;
- /* List of inodes in the i_transaction [j_list_lock] */
+ /**
+ * @i_list: List of inodes in the i_transaction [j_list_lock]
+ */
struct list_head i_list;
- /* VFS inode this inode belongs to [constant during the lifetime
- * of the structure] */
+ /**
+ * @i_vfs_inode:
+ *
+ * VFS inode this inode belongs to [constant for lifetime of structure]
+ */
struct inode *i_vfs_inode;
- /* Flags of inode [j_list_lock] */
+ /**
+ * @i_flags: Flags of inode [j_list_lock]
+ */
unsigned long i_flags;
};
@@ -447,12 +462,20 @@ struct jbd2_revoke_table_s;
* struct handle_s - The handle_s type is the concrete type associated with
* handle_t.
* @h_transaction: Which compound transaction is this update a part of?
+ * @h_journal: Which journal handle belongs to - used iff h_reserved set.
+ * @h_rsv_handle: Handle reserved for finishing the logical operation.
* @h_buffer_credits: Number of remaining buffers we are allowed to dirty.
- * @h_ref: Reference count on this handle
- * @h_err: Field for caller's use to track errors through large fs operations
- * @h_sync: flag for sync-on-close
- * @h_jdata: flag to force data journaling
- * @h_aborted: flag indicating fatal error on handle
+ * @h_ref: Reference count on this handle.
+ * @h_err: Field for caller's use to track errors through large fs operations.
+ * @h_sync: Flag for sync-on-close.
+ * @h_jdata: Flag to force data journaling.
+ * @h_reserved: Flag for handle for reserved credits.
+ * @h_aborted: Flag indicating fatal error on handle.
+ * @h_type: For handle statistics.
+ * @h_line_no: For handle statistics.
+ * @h_start_jiffies: Handle Start time.
+ * @h_requested_credits: Holds @h_buffer_credits after handle is started.
+ * @saved_alloc_context: Saved context while transaction is open.
**/
/* Docbook can't yet cope with the bit fields, but will leave the documentation
@@ -462,32 +485,23 @@ struct jbd2_revoke_table_s;
struct jbd2_journal_handle
{
union {
- /* Which compound transaction is this update a part of? */
transaction_t *h_transaction;
/* Which journal handle belongs to - used iff h_reserved set */
journal_t *h_journal;
};
- /* Handle reserved for finishing the logical operation */
handle_t *h_rsv_handle;
-
- /* Number of remaining buffers we are allowed to dirty: */
int h_buffer_credits;
-
- /* Reference count on this handle */
int h_ref;
-
- /* Field for caller's use to track errors through large fs */
- /* operations */
int h_err;
/* Flags [no locking] */
- unsigned int h_sync: 1; /* sync-on-close */
- unsigned int h_jdata: 1; /* force data journaling */
- unsigned int h_reserved: 1; /* handle with reserved credits */
- unsigned int h_aborted: 1; /* fatal error on handle */
- unsigned int h_type: 8; /* for handle statistics */
- unsigned int h_line_no: 16; /* for handle statistics */
+ unsigned int h_sync: 1;
+ unsigned int h_jdata: 1;
+ unsigned int h_reserved: 1;
+ unsigned int h_aborted: 1;
+ unsigned int h_type: 8;
+ unsigned int h_line_no: 16;
unsigned long h_start_jiffies;
unsigned int h_requested_credits;
@@ -729,228 +743,253 @@ jbd2_time_diff(unsigned long start, unsi
/**
* struct journal_s - The journal_s type is the concrete type associated with
* journal_t.
- * @j_flags: General journaling state flags
- * @j_errno: Is there an outstanding uncleared error on the journal (from a
- * prior abort)?
- * @j_sb_buffer: First part of superblock buffer
- * @j_superblock: Second part of superblock buffer
- * @j_format_version: Version of the superblock format
- * @j_state_lock: Protect the various scalars in the journal
- * @j_barrier_count: Number of processes waiting to create a barrier lock
- * @j_barrier: The barrier lock itself
- * @j_running_transaction: The current running transaction..
- * @j_committing_transaction: the transaction we are pushing to disk
- * @j_checkpoint_transactions: a linked circular list of all transactions
- * waiting for checkpointing
- * @j_wait_transaction_locked: Wait queue for waiting for a locked transaction
- * to start committing, or for a barrier lock to be released
- * @j_wait_done_commit: Wait queue for waiting for commit to complete
- * @j_wait_commit: Wait queue to trigger commit
- * @j_wait_updates: Wait queue to wait for updates to complete
- * @j_wait_reserved: Wait queue to wait for reserved buffer credits to drop
- * @j_checkpoint_mutex: Mutex for locking against concurrent checkpoints
- * @j_head: Journal head - identifies the first unused block in the journal
- * @j_tail: Journal tail - identifies the oldest still-used block in the
- * journal.
- * @j_free: Journal free - how many free blocks are there in the journal?
- * @j_first: The block number of the first usable block
- * @j_last: The block number one beyond the last usable block
- * @j_dev: Device where we store the journal
- * @j_blocksize: blocksize for the location where we store the journal.
- * @j_blk_offset: starting block offset for into the device where we store the
- * journal
- * @j_fs_dev: Device which holds the client fs. For internal journal this will
- * be equal to j_dev
- * @j_reserved_credits: Number of buffers reserved from the running transaction
- * @j_maxlen: Total maximum capacity of the journal region on disk.
- * @j_list_lock: Protects the buffer lists and internal buffer state.
- * @j_inode: Optional inode where we store the journal. If present, all journal
- * block numbers are mapped into this inode via bmap().
- * @j_tail_sequence: Sequence number of the oldest transaction in the log
- * @j_transaction_sequence: Sequence number of the next transaction to grant
- * @j_commit_sequence: Sequence number of the most recently committed
- * transaction
- * @j_commit_request: Sequence number of the most recent transaction wanting
- * commit
- * @j_uuid: Uuid of client object.
- * @j_task: Pointer to the current commit thread for this journal
- * @j_max_transaction_buffers: Maximum number of metadata buffers to allow in a
- * single compound commit transaction
- * @j_commit_interval: What is the maximum transaction lifetime before we begin
- * a commit?
- * @j_commit_timer: The timer used to wakeup the commit thread
- * @j_revoke_lock: Protect the revoke table
- * @j_revoke: The revoke table - maintains the list of revoked blocks in the
- * current transaction.
- * @j_revoke_table: alternate revoke tables for j_revoke
- * @j_wbuf: array of buffer_heads for jbd2_journal_commit_transaction
- * @j_wbufsize: maximum number of buffer_heads allowed in j_wbuf, the
- * number that will fit in j_blocksize
- * @j_last_sync_writer: most recent pid which did a synchronous write
- * @j_history_lock: Protect the transactions statistics history
- * @j_proc_entry: procfs entry for the jbd statistics directory
- * @j_stats: Overall statistics
- * @j_private: An opaque pointer to fs-private information.
- * @j_trans_commit_map: Lockdep entity to track transaction commit dependencies
*/
-
struct journal_s
{
- /* General journaling state flags [j_state_lock] */
+ /**
+ * @j_flags: General journaling state flags [j_state_lock]
+ */
unsigned long j_flags;
- /*
+ /**
+ * @j_errno:
+ *
* Is there an outstanding uncleared error on the journal (from a prior
* abort)? [j_state_lock]
*/
int j_errno;
- /* The superblock buffer */
+ /**
+ * @j_sb_buffer: The first part of the superblock buffer.
+ */
struct buffer_head *j_sb_buffer;
+
+ /**
+ * @j_superblock: The second part of the superblock buffer.
+ */
journal_superblock_t *j_superblock;
- /* Version of the superblock format */
+ /**
+ * @j_format_version: Version of the superblock format.
+ */
int j_format_version;
- /*
- * Protect the various scalars in the journal
+ /**
+ * @j_state_lock: Protect the various scalars in the journal.
*/
rwlock_t j_state_lock;
- /*
+ /**
+ * @j_barrier_count:
+ *
* Number of processes waiting to create a barrier lock [j_state_lock]
*/
int j_barrier_count;
- /* The barrier lock itself */
+ /**
+ * @j_barrier: The barrier lock itself.
+ */
struct mutex j_barrier;
- /*
+ /**
+ * @j_running_transaction:
+ *
* Transactions: The current running transaction...
* [j_state_lock] [caller holding open handle]
*/
transaction_t *j_running_transaction;
- /*
+ /**
+ * @j_committing_transaction:
+ *
* the transaction we are pushing to disk
* [j_state_lock] [caller holding open handle]
*/
transaction_t *j_committing_transaction;
- /*
+ /**
+ * @j_checkpoint_transactions:
+ *
* ... and a linked circular list of all transactions waiting for
* checkpointing. [j_list_lock]
*/
transaction_t *j_checkpoint_transactions;
- /*
+ /**
+ * @j_wait_transaction_locked:
+ *
* Wait queue for waiting for a locked transaction to start committing,
- * or for a barrier lock to be released
+ * or for a barrier lock to be released.
*/
wait_queue_head_t j_wait_transaction_locked;
- /* Wait queue for waiting for commit to complete */
+ /**
+ * @j_wait_done_commit: Wait queue for waiting for commit to complete.
+ */
wait_queue_head_t j_wait_done_commit;
- /* Wait queue to trigger commit */
+ /**
+ * @j_wait_commit: Wait queue to trigger commit.
+ */
wait_queue_head_t j_wait_commit;
- /* Wait queue to wait for updates to complete */
+ /**
+ * @j_wait_updates: Wait queue to wait for updates to complete.
+ */
wait_queue_head_t j_wait_updates;
- /* Wait queue to wait for reserved buffer credits to drop */
+ /**
+ * @j_wait_reserved:
+ *
+ * Wait queue to wait for reserved buffer credits to drop.
+ */
wait_queue_head_t j_wait_reserved;
- /* Semaphore for locking against concurrent checkpoints */
+ /**
+ * @j_checkpoint_mutex:
+ *
+ * Semaphore for locking against concurrent checkpoints.
+ */
struct mutex j_checkpoint_mutex;
- /*
+ /**
+ * @j_chkpt_bhs:
+ *
* List of buffer heads used by the checkpoint routine. This
* was moved from jbd2_log_do_checkpoint() to reduce stack
* usage. Access to this array is controlled by the
- * j_checkpoint_mutex. [j_checkpoint_mutex]
+ * @j_checkpoint_mutex. [j_checkpoint_mutex]
*/
struct buffer_head *j_chkpt_bhs[JBD2_NR_BATCH];
-
- /*
+
+ /**
+ * @j_head:
+ *
* Journal head: identifies the first unused block in the journal.
* [j_state_lock]
*/
unsigned long j_head;
- /*
+ /**
+ * @j_tail:
+ *
* Journal tail: identifies the oldest still-used block in the journal.
* [j_state_lock]
*/
unsigned long j_tail;
- /*
+ /**
+ * @j_free:
+ *
* Journal free: how many free blocks are there in the journal?
* [j_state_lock]
*/
unsigned long j_free;
- /*
- * Journal start and end: the block numbers of the first usable block
- * and one beyond the last usable block in the journal. [j_state_lock]
+ /**
+ * @j_first:
+ *
+ * The block number of the first usable block in the journal
+ * [j_state_lock].
*/
unsigned long j_first;
+
+ /**
+ * @j_last:
+ *
+ * The block number one beyond the last usable block in the journal
+ * [j_state_lock].
+ */
unsigned long j_last;
- /*
- * Device, blocksize and starting block offset for the location where we
- * store the journal.
+ /**
+ * @j_dev: Device where we store the journal.
*/
struct block_device *j_dev;
+
+ /**
+ * @j_blocksize: Block size for the location where we store the journal.
+ */
int j_blocksize;
+
+ /**
+ * @j_blk_offset:
+ *
+ * Starting block offset into the device where we store the journal.
+ */
unsigned long long j_blk_offset;
+
+ /**
+ * @j_devname: Journal device name.
+ */
char j_devname[BDEVNAME_SIZE+24];
- /*
+ /**
+ * @j_fs_dev:
+ *
* Device which holds the client fs. For internal journal this will be
* equal to j_dev.
*/
struct block_device *j_fs_dev;
- /* Total maximum capacity of the journal region on disk. */
+ /**
+ * @j_maxlen: Total maximum capacity of the journal region on disk.
+ */
unsigned int j_maxlen;
- /* Number of buffers reserved from the running transaction */
+ /**
+ * @j_reserved_credits:
+ *
+ * Number of buffers reserved from the running transaction.
+ */
atomic_t j_reserved_credits;
- /*
- * Protects the buffer lists and internal buffer state.
+ /**
+ * @j_list_lock: Protects the buffer lists and internal buffer state.
*/
spinlock_t j_list_lock;
- /* Optional inode where we store the journal. If present, all */
- /* journal block numbers are mapped into this inode via */
- /* bmap(). */
+ /**
+ * @j_inode:
+ *
+ * Optional inode where we store the journal. If present, all
+ * journal block numbers are mapped into this inode via bmap().
+ */
struct inode *j_inode;
- /*
+ /**
+ * @j_tail_sequence:
+ *
* Sequence number of the oldest transaction in the log [j_state_lock]
*/
tid_t j_tail_sequence;
- /*
+ /**
+ * @j_transaction_sequence:
+ *
* Sequence number of the next transaction to grant [j_state_lock]
*/
tid_t j_transaction_sequence;
- /*
+ /**
+ * @j_commit_sequence:
+ *
* Sequence number of the most recently committed transaction
* [j_state_lock].
*/
tid_t j_commit_sequence;
- /*
+ /**
+ * @j_commit_request:
+ *
* Sequence number of the most recent transaction wanting commit
* [j_state_lock]
*/
tid_t j_commit_request;
- /*
+ /**
+ * @j_uuid:
+ *
* Journal uuid: identifies the object (filesystem, LVM volume etc)
* backed by this journal. This will eventually be replaced by an array
* of uuids, allowing us to index multiple devices within a single
@@ -958,85 +997,151 @@ struct journal_s
*/
__u8 j_uuid[16];
- /* Pointer to the current commit thread for this journal */
+ /**
+ * @j_task: Pointer to the current commit thread for this journal.
+ */
struct task_struct *j_task;
- /*
+ /**
+ * @j_max_transaction_buffers:
+ *
* Maximum number of metadata buffers to allow in a single compound
- * commit transaction
+ * commit transaction.
*/
int j_max_transaction_buffers;
- /*
+ /**
+ * @j_commit_interval:
+ *
* What is the maximum transaction lifetime before we begin a commit?
*/
unsigned long j_commit_interval;
- /* The timer used to wakeup the commit thread: */
+ /**
+ * @j_commit_timer: The timer used to wakeup the commit thread.
+ */
struct timer_list j_commit_timer;
- /*
- * The revoke table: maintains the list of revoked blocks in the
- * current transaction. [j_revoke_lock]
+ /**
+ * @j_revoke_lock: Protect the revoke table.
*/
spinlock_t j_revoke_lock;
+
+ /**
+ * @j_revoke:
+ *
+ * The revoke table - maintains the list of revoked blocks in the
+ * current transaction.
+ */
struct jbd2_revoke_table_s *j_revoke;
+
+ /**
+ * @j_revoke_table: Alternate revoke tables for j_revoke.
+ */
struct jbd2_revoke_table_s *j_revoke_table[2];
- /*
- * array of bhs for jbd2_journal_commit_transaction
+ /**
+ * @j_wbuf: Array of bhs for jbd2_journal_commit_transaction.
*/
struct buffer_head **j_wbuf;
+
+ /**
+ * @j_wbufsize:
+ *
+ * Size of @j_wbuf array.
+ */
int j_wbufsize;
- /*
- * this is the pid of hte last person to run a synchronous operation
- * through the journal
+ /**
+ * @j_last_sync_writer:
+ *
+ * The pid of the last person to run a synchronous operation
+ * through the journal.
*/
pid_t j_last_sync_writer;
- /*
- * the average amount of time in nanoseconds it takes to commit a
+ /**
+ * @j_average_commit_time:
+ *
+ * The average amount of time in nanoseconds it takes to commit a
* transaction to disk. [j_state_lock]
*/
u64 j_average_commit_time;
- /*
- * minimum and maximum times that we should wait for
- * additional filesystem operations to get batched into a
- * synchronous handle in microseconds
+ /**
+ * @j_min_batch_time:
+ *
+ * Minimum time that we should wait for additional filesystem operations
+ * to get batched into a synchronous handle in microseconds.
*/
u32 j_min_batch_time;
+
+ /**
+ * @j_max_batch_time:
+ *
+ * Maximum time that we should wait for additional filesystem operations
+ * to get batched into a synchronous handle in microseconds.
+ */
u32 j_max_batch_time;
- /* This function is called when a transaction is closed */
+ /**
+ * @j_commit_callback:
+ *
+ * This function is called when a transaction is closed.
+ */
void (*j_commit_callback)(journal_t *,
transaction_t *);
/*
* Journal statistics
*/
+
+ /**
+ * @j_history_lock: Protect the transactions statistics history.
+ */
spinlock_t j_history_lock;
+
+ /**
+ * @j_proc_entry: procfs entry for the jbd statistics directory.
+ */
struct proc_dir_entry *j_proc_entry;
+
+ /**
+ * @j_stats: Overall statistics.
+ */
struct transaction_stats_s j_stats;
- /* Failed journal commit ID */
+ /**
+ * @j_failed_commit: Failed journal commit ID.
+ */
unsigned int j_failed_commit;
- /*
+ /**
+ * @j_private:
+ *
* An opaque pointer to fs-private information. ext3 puts its
- * superblock pointer here
+ * superblock pointer here.
*/
void *j_private;
- /* Reference to checksum algorithm driver via cryptoapi */
+ /**
+ * @j_chksum_driver:
+ *
+ * Reference to checksum algorithm driver via cryptoapi.
+ */
struct crypto_shash *j_chksum_driver;
- /* Precomputed journal UUID checksum for seeding other checksums */
+ /**
+ * @j_csum_seed:
+ *
+ * Precomputed journal UUID checksum for seeding other checksums.
+ */
__u32 j_csum_seed;
#ifdef CONFIG_DEBUG_LOCK_ALLOC
- /*
+ /**
+ * @j_trans_commit_map:
+ *
* Lockdep entity to track transaction commit dependencies. Handles
* hold this "lock" for read, when we wait for commit, we acquire the
* "lock" for writing. This matches the properties of jbd2 journalling
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: yinbo.zhu <[email protected]>
commit 97618aca1440b5addc5c3d78659d3e176be23b80 upstream.
The bit eSDHC_TBCTL[TB_EN] couldn't be reset by eSDHC_SYSCTL[RSTA] which is
used to reset for all. The driver should make sure it's cleared before card
initialization, otherwise the initialization would fail.
Signed-off-by: yinbo.zhu <[email protected]>
Acked-by: Adrian Hunter <[email protected]>
Signed-off-by: Ulf Hansson <[email protected]>
Cc: Rasmus Villemoes <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/mmc/host/sdhci-of-esdhc.c | 4 ++++
1 file changed, 4 insertions(+)
--- a/drivers/mmc/host/sdhci-of-esdhc.c
+++ b/drivers/mmc/host/sdhci-of-esdhc.c
@@ -785,6 +785,10 @@ static void esdhc_init(struct platform_d
pltfm_host = sdhci_priv(host);
esdhc = sdhci_pltfm_priv(pltfm_host);
+ val = sdhci_readl(host, ESDHC_TBCTL);
+ val &= ~ESDHC_TB_EN;
+ sdhci_writel(host, val, ESDHC_TBCTL);
+
host_ver = sdhci_readw(host, SDHCI_HOST_VERSION);
esdhc->vendor_ver = (host_ver & SDHCI_VENDOR_VER_MASK) >>
SDHCI_VENDOR_VER_SHIFT;
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Amir Goldstein <[email protected]>
commit 31747eda41ef3c30c09c5c096b380bf54013746a upstream.
fsnotify pins a watched directory inode in cache, but if directory dentry
is released, new lookup will allocate a new dentry and a new inode.
Directory events will be notified on the new inode, while fsnotify listener
is watching the old pinned inode.
Hash all directory inodes to reuse the pinned inode on lookup. Pure upper
dirs are hashes by real upper inode, merge and lower dirs are hashed by
real lower inode.
The reference to lower inode was being held by the lower dentry object
in the overlay dentry (oe->lowerstack[0]). Releasing the overlay dentry
may drop lower inode refcount to zero. Add a refcount on behalf of the
overlay inode to prevent that.
As a by-product, hashing directory inodes also detects multiple
redirected dirs to the same lower dir and uncovered redirected dir
target on and returns -ESTALE on lookup.
The reported issue dates back to initial version of overlayfs, but this
patch depends on ovl_inode code that was introduced in kernel v4.13.
Cc: <[email protected]> #v4.13
Reported-by: Niklas Cassel <[email protected]>
Signed-off-by: Amir Goldstein <[email protected]>
Signed-off-by: Miklos Szeredi <[email protected]>
Tested-by: Niklas Cassel <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/overlayfs/inode.c | 37 +++++++++++++++++++++++++++----------
fs/overlayfs/super.c | 1 +
fs/overlayfs/util.c | 4 ++--
3 files changed, 30 insertions(+), 12 deletions(-)
--- a/fs/overlayfs/inode.c
+++ b/fs/overlayfs/inode.c
@@ -579,6 +579,16 @@ static int ovl_inode_set(struct inode *i
static bool ovl_verify_inode(struct inode *inode, struct dentry *lowerdentry,
struct dentry *upperdentry)
{
+ if (S_ISDIR(inode->i_mode)) {
+ /* Real lower dir moved to upper layer under us? */
+ if (!lowerdentry && ovl_inode_lower(inode))
+ return false;
+
+ /* Lookup of an uncovered redirect origin? */
+ if (!upperdentry && ovl_inode_upper(inode))
+ return false;
+ }
+
/*
* Allow non-NULL lower inode in ovl_inode even if lowerdentry is NULL.
* This happens when finding a copied up overlay inode for a renamed
@@ -606,6 +616,8 @@ struct inode *ovl_get_inode(struct dentr
struct inode *inode;
/* Already indexed or could be indexed on copy up? */
bool indexed = (index || (ovl_indexdir(dentry->d_sb) && !upperdentry));
+ struct dentry *origin = indexed ? lowerdentry : NULL;
+ bool is_dir;
if (WARN_ON(upperdentry && indexed && !lowerdentry))
return ERR_PTR(-EIO);
@@ -614,15 +626,19 @@ struct inode *ovl_get_inode(struct dentr
realinode = d_inode(lowerdentry);
/*
- * Copy up origin (lower) may exist for non-indexed upper, but we must
- * not use lower as hash key in that case.
- * Hash inodes that are or could be indexed by origin inode and
- * non-indexed upper inodes that could be hard linked by upper inode.
+ * Copy up origin (lower) may exist for non-indexed non-dir upper, but
+ * we must not use lower as hash key in that case.
+ * Hash non-dir that is or could be indexed by origin inode.
+ * Hash dir that is or could be merged by origin inode.
+ * Hash pure upper and non-indexed non-dir by upper inode.
*/
- if (!S_ISDIR(realinode->i_mode) && (upperdentry || indexed)) {
- struct inode *key = d_inode(indexed ? lowerdentry :
- upperdentry);
- unsigned int nlink;
+ is_dir = S_ISDIR(realinode->i_mode);
+ if (is_dir)
+ origin = lowerdentry;
+
+ if (upperdentry || origin) {
+ struct inode *key = d_inode(origin ?: upperdentry);
+ unsigned int nlink = is_dir ? 1 : realinode->i_nlink;
inode = iget5_locked(dentry->d_sb, (unsigned long) key,
ovl_inode_test, ovl_inode_set, key);
@@ -643,8 +659,9 @@ struct inode *ovl_get_inode(struct dentr
goto out;
}
- nlink = ovl_get_nlink(lowerdentry, upperdentry,
- realinode->i_nlink);
+ /* Recalculate nlink for non-dir due to indexing */
+ if (!is_dir)
+ nlink = ovl_get_nlink(lowerdentry, upperdentry, nlink);
set_nlink(inode, nlink);
} else {
inode = new_inode(dentry->d_sb);
--- a/fs/overlayfs/super.c
+++ b/fs/overlayfs/super.c
@@ -200,6 +200,7 @@ static void ovl_destroy_inode(struct ino
struct ovl_inode *oi = OVL_I(inode);
dput(oi->__upperdentry);
+ iput(oi->lower);
kfree(oi->redirect);
ovl_dir_cache_free(inode);
mutex_destroy(&oi->lock);
--- a/fs/overlayfs/util.c
+++ b/fs/overlayfs/util.c
@@ -253,7 +253,7 @@ void ovl_inode_init(struct inode *inode,
if (upperdentry)
OVL_I(inode)->__upperdentry = upperdentry;
if (lowerdentry)
- OVL_I(inode)->lower = d_inode(lowerdentry);
+ OVL_I(inode)->lower = igrab(d_inode(lowerdentry));
ovl_copyattr(d_inode(upperdentry ?: lowerdentry), inode);
}
@@ -269,7 +269,7 @@ void ovl_inode_update(struct inode *inod
*/
smp_wmb();
OVL_I(inode)->__upperdentry = upperdentry;
- if (!S_ISDIR(upperinode->i_mode) && inode_unhashed(inode)) {
+ if (inode_unhashed(inode)) {
inode->i_private = upperinode;
__insert_inode_hash(inode, (unsigned long) upperinode);
}
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: yinbo.zhu <[email protected]>
commit f2bc600008bd6f7f5d0b6b56238d14f95cd454d2 upstream.
When system wakes up from sleep on ls1046ardb, the SD operation fails
with mmc error messages since ESDHC_TB_EN bit couldn't be cleaned by
eSDHC_SYSCTL[RSTA]. It's proper to clean this bit in esdhc_reset()
rather than in probe.
Signed-off-by: yinbo.zhu <[email protected]>
Acked-by: Yangbo Lu <[email protected]>
Acked-by: Adrian Hunter <[email protected]>
Signed-off-by: Ulf Hansson <[email protected]>
Cc: Rasmus Villemoes <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/mmc/host/sdhci-of-esdhc.c | 12 ++++++++----
1 file changed, 8 insertions(+), 4 deletions(-)
--- a/drivers/mmc/host/sdhci-of-esdhc.c
+++ b/drivers/mmc/host/sdhci-of-esdhc.c
@@ -589,10 +589,18 @@ static void esdhc_pltfm_set_bus_width(st
static void esdhc_reset(struct sdhci_host *host, u8 mask)
{
+ u32 val;
+
sdhci_reset(host, mask);
sdhci_writel(host, host->ier, SDHCI_INT_ENABLE);
sdhci_writel(host, host->ier, SDHCI_SIGNAL_ENABLE);
+
+ if (mask & SDHCI_RESET_ALL) {
+ val = sdhci_readl(host, ESDHC_TBCTL);
+ val &= ~ESDHC_TB_EN;
+ sdhci_writel(host, val, ESDHC_TBCTL);
+ }
}
/* The SCFG, Supplemental Configuration Unit, provides SoC specific
@@ -785,10 +793,6 @@ static void esdhc_init(struct platform_d
pltfm_host = sdhci_priv(host);
esdhc = sdhci_pltfm_priv(pltfm_host);
- val = sdhci_readl(host, ESDHC_TBCTL);
- val &= ~ESDHC_TB_EN;
- sdhci_writel(host, val, ESDHC_TBCTL);
-
host_ver = sdhci_readw(host, SDHCI_HOST_VERSION);
esdhc->vendor_ver = (host_ver & SDHCI_VENDOR_VER_MASK) >>
SDHCI_VENDOR_VER_SHIFT;
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Tony Luck <[email protected]>
commit fd0e786d9d09024f67bd71ec094b110237dc3840 upstream.
In the following commit:
ce0fa3e56ad2 ("x86/mm, mm/hwpoison: Clear PRESENT bit for kernel 1:1 mappings of poison pages")
... we added code to memory_failure() to unmap the page from the
kernel 1:1 virtual address space to avoid speculative access to the
page logging additional errors.
But memory_failure() may not always succeed in taking the page offline,
especially if the page belongs to the kernel. This can happen if
there are too many corrected errors on a page and either mcelog(8)
or drivers/ras/cec.c asks to take a page offline.
Since we remove the 1:1 mapping early in memory_failure(), we can
end up with the page unmapped, but still in use. On the next access
the kernel crashes :-(
There are also various debug paths that call memory_failure() to simulate
occurrence of an error. Since there is no actual error in memory, we
don't need to map out the page for those cases.
Revert most of the previous attempt and keep the solution local to
arch/x86/kernel/cpu/mcheck/mce.c. Unmap the page only when:
1) there is a real error
2) memory_failure() succeeds.
All of this only applies to 64-bit systems. 32-bit kernel doesn't map
all of memory into kernel space. It isn't worth adding the code to unmap
the piece that is mapped because nobody would run a 32-bit kernel on a
machine that has recoverable machine checks.
Signed-off-by: Tony Luck <[email protected]>
Cc: Andrew Morton <[email protected]>
Cc: Andy Lutomirski <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: Brian Gerst <[email protected]>
Cc: Dave <[email protected]>
Cc: Denys Vlasenko <[email protected]>
Cc: Josh Poimboeuf <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Naoya Horiguchi <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Robert (Persistent Memory) <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: [email protected]
Cc: [email protected] #v4.14
Fixes: ce0fa3e56ad2 ("x86/mm, mm/hwpoison: Clear PRESENT bit for kernel 1:1 mappings of poison pages")
Signed-off-by: Ingo Molnar <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/include/asm/page_64.h | 4 ----
arch/x86/kernel/cpu/mcheck/mce-internal.h | 15 +++++++++++++++
arch/x86/kernel/cpu/mcheck/mce.c | 17 +++++++++++------
include/linux/mm_inline.h | 6 ------
mm/memory-failure.c | 2 --
5 files changed, 26 insertions(+), 18 deletions(-)
--- a/arch/x86/include/asm/page_64.h
+++ b/arch/x86/include/asm/page_64.h
@@ -52,10 +52,6 @@ static inline void clear_page(void *page
void copy_page(void *to, void *from);
-#ifdef CONFIG_X86_MCE
-#define arch_unmap_kpfn arch_unmap_kpfn
-#endif
-
#endif /* !__ASSEMBLY__ */
#ifdef CONFIG_X86_VSYSCALL_EMULATION
--- a/arch/x86/kernel/cpu/mcheck/mce-internal.h
+++ b/arch/x86/kernel/cpu/mcheck/mce-internal.h
@@ -115,4 +115,19 @@ static inline void mce_unregister_inject
extern struct mca_config mca_cfg;
+#ifndef CONFIG_X86_64
+/*
+ * On 32-bit systems it would be difficult to safely unmap a poison page
+ * from the kernel 1:1 map because there are no non-canonical addresses that
+ * we can use to refer to the address without risking a speculative access.
+ * However, this isn't much of an issue because:
+ * 1) Few unmappable pages are in the 1:1 map. Most are in HIGHMEM which
+ * are only mapped into the kernel as needed
+ * 2) Few people would run a 32-bit kernel on a machine that supports
+ * recoverable errors because they have too much memory to boot 32-bit.
+ */
+static inline void mce_unmap_kpfn(unsigned long pfn) {}
+#define mce_unmap_kpfn mce_unmap_kpfn
+#endif
+
#endif /* __X86_MCE_INTERNAL_H__ */
--- a/arch/x86/kernel/cpu/mcheck/mce.c
+++ b/arch/x86/kernel/cpu/mcheck/mce.c
@@ -106,6 +106,10 @@ static struct irq_work mce_irq_work;
static void (*quirk_no_way_out)(int bank, struct mce *m, struct pt_regs *regs);
+#ifndef mce_unmap_kpfn
+static void mce_unmap_kpfn(unsigned long pfn);
+#endif
+
/*
* CPU/chipset specific EDAC code can register a notifier call here to print
* MCE errors in a human-readable form.
@@ -582,7 +586,8 @@ static int srao_decode_notifier(struct n
if (mce_usable_address(mce) && (mce->severity == MCE_AO_SEVERITY)) {
pfn = mce->addr >> PAGE_SHIFT;
- memory_failure(pfn, MCE_VECTOR, 0);
+ if (memory_failure(pfn, MCE_VECTOR, 0))
+ mce_unmap_kpfn(pfn);
}
return NOTIFY_OK;
@@ -1049,12 +1054,13 @@ static int do_memory_failure(struct mce
ret = memory_failure(m->addr >> PAGE_SHIFT, MCE_VECTOR, flags);
if (ret)
pr_err("Memory error not recovered");
+ else
+ mce_unmap_kpfn(m->addr >> PAGE_SHIFT);
return ret;
}
-#if defined(arch_unmap_kpfn) && defined(CONFIG_MEMORY_FAILURE)
-
-void arch_unmap_kpfn(unsigned long pfn)
+#ifndef mce_unmap_kpfn
+static void mce_unmap_kpfn(unsigned long pfn)
{
unsigned long decoy_addr;
@@ -1065,7 +1071,7 @@ void arch_unmap_kpfn(unsigned long pfn)
* We would like to just call:
* set_memory_np((unsigned long)pfn_to_kaddr(pfn), 1);
* but doing that would radically increase the odds of a
- * speculative access to the posion page because we'd have
+ * speculative access to the poison page because we'd have
* the virtual address of the kernel 1:1 mapping sitting
* around in registers.
* Instead we get tricky. We create a non-canonical address
@@ -1090,7 +1096,6 @@ void arch_unmap_kpfn(unsigned long pfn)
if (set_memory_np(decoy_addr, 1))
pr_warn("Could not invalidate pfn=0x%lx from 1:1 map\n", pfn);
-
}
#endif
--- a/include/linux/mm_inline.h
+++ b/include/linux/mm_inline.h
@@ -127,10 +127,4 @@ static __always_inline enum lru_list pag
#define lru_to_page(head) (list_entry((head)->prev, struct page, lru))
-#ifdef arch_unmap_kpfn
-extern void arch_unmap_kpfn(unsigned long pfn);
-#else
-static __always_inline void arch_unmap_kpfn(unsigned long pfn) { }
-#endif
-
#endif
--- a/mm/memory-failure.c
+++ b/mm/memory-failure.c
@@ -1146,8 +1146,6 @@ int memory_failure(unsigned long pfn, in
return 0;
}
- arch_unmap_kpfn(pfn);
-
orig_head = hpage = compound_head(p);
num_poisoned_pages_inc();
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Arnd Bergmann <[email protected]>
commit 3343647813fdf0f2409fbf5816ee3e0622168079 upstream.
Without this tag, we get a build warning:
WARNING: modpost: missing MODULE_LICENSE() in arch/arm/mach-pxa/tosa-bt.o
For completeness, I'm also adding author and description fields.
Acked-by: Robert Jarzmik <[email protected]>
Signed-off-by: Arnd Bergmann <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/arm/mach-pxa/tosa-bt.c | 4 ++++
1 file changed, 4 insertions(+)
--- a/arch/arm/mach-pxa/tosa-bt.c
+++ b/arch/arm/mach-pxa/tosa-bt.c
@@ -132,3 +132,7 @@ static struct platform_driver tosa_bt_dr
},
};
module_platform_driver(tosa_bt_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Dmitry Baryshkov");
+MODULE_DESCRIPTION("Bluetooth built-in chip control");
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Linus Walleij <[email protected]>
commit 586b2a4befad88cd87b372a1cea01e58c6811ea9 upstream.
The EB MP board probably has a character LCD but the board manual does
not really state which IRQ it has assigned to this device. The invalid
assignment was a mistake by me during submission of the DTSI where I was
looking for the reference, didn't find it and didn't fill it in.
Delete this for now: it can probably be fixed but that requires access
to the actual board for some trial-and-error experiments.
Reported-by: Arnd Bergmann <[email protected]>
Signed-off-by: Linus Walleij <[email protected]>
Signed-off-by: Olof Johansson <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/arm/boot/dts/arm-realview-eb-mp.dtsi | 5 -----
1 file changed, 5 deletions(-)
--- a/arch/arm/boot/dts/arm-realview-eb-mp.dtsi
+++ b/arch/arm/boot/dts/arm-realview-eb-mp.dtsi
@@ -150,11 +150,6 @@
interrupts = <0 8 IRQ_TYPE_LEVEL_HIGH>;
};
-&charlcd {
- interrupt-parent = <&intc>;
- interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
-};
-
&serial0 {
interrupt-parent = <&intc>;
interrupts = <0 4 IRQ_TYPE_LEVEL_HIGH>;
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Kirill Marinushkin <[email protected]>
commit 447cae58cecd69392b74a4a42cd0ab9cabd816af upstream.
The layout of the UAC2 Control request and response varies depending on
the request type. With the current implementation, only the Layout 2
Parameter Block (with the 2-byte sized RANGE attribute) is handled
properly. For the Control requests with the 1-byte sized RANGE attribute
(Bass Control, Mid Control, Tremble Control), the response is parsed
incorrectly.
This commit:
* fixes the wLength field value in the request
* fixes parsing the range values from the response
Fixes: 23caaf19b11e ("ALSA: usb-mixer: Add support for Audio Class v2.0")
Signed-off-by: Kirill Marinushkin <[email protected]>
Cc: <[email protected]>
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
sound/usb/mixer.c | 18 +++++++++++-------
1 file changed, 11 insertions(+), 7 deletions(-)
--- a/sound/usb/mixer.c
+++ b/sound/usb/mixer.c
@@ -347,17 +347,20 @@ static int get_ctl_value_v2(struct usb_m
int validx, int *value_ret)
{
struct snd_usb_audio *chip = cval->head.mixer->chip;
- unsigned char buf[4 + 3 * sizeof(__u32)]; /* enough space for one range */
+ /* enough space for one range */
+ unsigned char buf[sizeof(__u16) + 3 * sizeof(__u32)];
unsigned char *val;
- int idx = 0, ret, size;
+ int idx = 0, ret, val_size, size;
__u8 bRequest;
+ val_size = uac2_ctl_value_size(cval->val_type);
+
if (request == UAC_GET_CUR) {
bRequest = UAC2_CS_CUR;
- size = uac2_ctl_value_size(cval->val_type);
+ size = val_size;
} else {
bRequest = UAC2_CS_RANGE;
- size = sizeof(buf);
+ size = sizeof(__u16) + 3 * val_size;
}
memset(buf, 0, sizeof(buf));
@@ -390,16 +393,17 @@ error:
val = buf + sizeof(__u16);
break;
case UAC_GET_MAX:
- val = buf + sizeof(__u16) * 2;
+ val = buf + sizeof(__u16) + val_size;
break;
case UAC_GET_RES:
- val = buf + sizeof(__u16) * 3;
+ val = buf + sizeof(__u16) + val_size * 2;
break;
default:
return -EINVAL;
}
- *value_ret = convert_signed_value(cval, snd_usb_combine_bytes(val, sizeof(__u16)));
+ *value_ret = convert_signed_value(cval,
+ snd_usb_combine_bytes(val, val_size));
return 0;
}
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Daniel Mack <[email protected]>
commit 7c74866baef1827e18f8269aec85030063520bd4 upstream.
Add some more devices that need quirks to handle DSD modes correctly.
Signed-off-by: Daniel Mack <[email protected]>
Reported-and-tested-by: Thomas Gresens <[email protected]>
Cc: <[email protected]>
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
sound/usb/quirks.c | 7 +++++--
1 file changed, 5 insertions(+), 2 deletions(-)
--- a/sound/usb/quirks.c
+++ b/sound/usb/quirks.c
@@ -1369,8 +1369,11 @@ u64 snd_usb_interface_dsd_format_quirks(
return SNDRV_PCM_FMTBIT_DSD_U32_BE;
break;
- /* Amanero Combo384 USB interface with native DSD support */
- case USB_ID(0x16d0, 0x071a):
+ /* Amanero Combo384 USB based DACs with native DSD support */
+ case USB_ID(0x16d0, 0x071a): /* Amanero - Combo384 */
+ case USB_ID(0x2ab6, 0x0004): /* T+A DAC8DSD-V2.0, MP1000E-V2.0, MP2000R-V2.0, MP2500R-V2.0, MP3100HV-V2.0 */
+ case USB_ID(0x2ab6, 0x0005): /* T+A USB HD Audio 1 */
+ case USB_ID(0x2ab6, 0x0006): /* T+A USB HD Audio 2 */
if (fp->altsetting == 2) {
switch (le16_to_cpu(chip->dev->descriptor.bcdDevice)) {
case 0x199:
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: James Hogan <[email protected]>
commit ec897569ad7dbc6d595873a487c3fac23f463f76 upstream.
Move the Kconfig symbols USB_UHCI_BIG_ENDIAN_MMIO and
USB_UHCI_BIG_ENDIAN_DESC out of drivers/usb/host/Kconfig, which is
conditional upon USB && USB_SUPPORT, so that it can be freely selected
by platform Kconfig symbols in architecture code.
For example once the MIPS_GENERIC platform selects are fixed in commit
2e6522c56552 ("MIPS: Fix typo BIG_ENDIAN to CPU_BIG_ENDIAN"), the MIPS
32r6_defconfig warns like so:
warning: (MIPS_GENERIC) selects USB_UHCI_BIG_ENDIAN_MMIO which has unmet direct dependencies (USB_SUPPORT && USB)
warning: (MIPS_GENERIC) selects USB_UHCI_BIG_ENDIAN_DESC which has unmet direct dependencies (USB_SUPPORT && USB)
Fixes: 2e6522c56552 ("MIPS: Fix typo BIG_ENDIAN to CPU_BIG_ENDIAN")
Signed-off-by: James Hogan <[email protected]>
Cc: Corentin Labbe <[email protected]>
Cc: Ralf Baechle <[email protected]>
Cc: Paul Burton <[email protected]>
Cc: [email protected]
Cc: [email protected]
Acked-by: Greg Kroah-Hartman <[email protected]>
Patchwork: https://patchwork.linux-mips.org/patch/18559/
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/Kconfig | 8 ++++++++
drivers/usb/host/Kconfig | 8 --------
2 files changed, 8 insertions(+), 8 deletions(-)
--- a/drivers/usb/Kconfig
+++ b/drivers/usb/Kconfig
@@ -19,6 +19,14 @@ config USB_EHCI_BIG_ENDIAN_MMIO
config USB_EHCI_BIG_ENDIAN_DESC
bool
+config USB_UHCI_BIG_ENDIAN_MMIO
+ bool
+ default y if SPARC_LEON
+
+config USB_UHCI_BIG_ENDIAN_DESC
+ bool
+ default y if SPARC_LEON
+
menuconfig USB_SUPPORT
bool "USB support"
depends on HAS_IOMEM
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -637,14 +637,6 @@ config USB_UHCI_ASPEED
bool
default y if ARCH_ASPEED
-config USB_UHCI_BIG_ENDIAN_MMIO
- bool
- default y if SPARC_LEON
-
-config USB_UHCI_BIG_ENDIAN_DESC
- bool
- default y if SPARC_LEON
-
config USB_FHCI_HCD
tristate "Freescale QE USB Host Controller support"
depends on OF_GPIO && QE_GPIO && QUICC_ENGINE
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jan-Marek Glogowski <[email protected]>
commit fdcc968a3b290407bcba9d4c90e2fba6d8d928f1 upstream.
These laptops have a combined jack to attach headsets, the U727 on
the left, the U757 on the right, but a headsets microphone doesn't
work. Using hdajacksensetest I found that pin 0x19 changed the
present state when plugging the headset, in addition to 0x21, but
didn't have the correct configuration (shown as "Not connected").
So this sets the configuration to the same values as the headphone
pin 0x21 except for the device type microphone, which makes it
work correctly. With the patch the configured pins for U727 are
Pin 0x12 (Internal Mic, Mobile-In): present = No
Pin 0x14 (Internal Speaker): present = No
Pin 0x19 (Black Mic, Left side): present = No
Pin 0x1d (Internal Aux): present = No
Pin 0x21 (Black Headphone, Left side): present = No
Signed-off-by: Jan-Marek Glogowski <[email protected]>
Cc: <[email protected]>
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
sound/pci/hda/patch_realtek.c | 19 +++++++++++++++++++
1 file changed, 19 insertions(+)
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -3355,6 +3355,19 @@ static void alc269_fixup_pincfg_no_hp_to
spec->parse_flags = HDA_PINCFG_NO_HP_FIXUP;
}
+static void alc269_fixup_pincfg_U7x7_headset_mic(struct hda_codec *codec,
+ const struct hda_fixup *fix,
+ int action)
+{
+ unsigned int cfg_headphone = snd_hda_codec_get_pincfg(codec, 0x21);
+ unsigned int cfg_headset_mic = snd_hda_codec_get_pincfg(codec, 0x19);
+
+ if (cfg_headphone && cfg_headset_mic == 0x411111f0)
+ snd_hda_codec_set_pincfg(codec, 0x19,
+ (cfg_headphone & ~AC_DEFCFG_DEVICE) |
+ (AC_JACK_MIC_IN << AC_DEFCFG_DEVICE_SHIFT));
+}
+
static void alc269_fixup_hweq(struct hda_codec *codec,
const struct hda_fixup *fix, int action)
{
@@ -5228,6 +5241,7 @@ enum {
ALC269_FIXUP_LIFEBOOK_EXTMIC,
ALC269_FIXUP_LIFEBOOK_HP_PIN,
ALC269_FIXUP_LIFEBOOK_NO_HP_TO_LINEOUT,
+ ALC255_FIXUP_LIFEBOOK_U7x7_HEADSET_MIC,
ALC269_FIXUP_AMIC,
ALC269_FIXUP_DMIC,
ALC269VB_FIXUP_AMIC,
@@ -5434,6 +5448,10 @@ static const struct hda_fixup alc269_fix
.type = HDA_FIXUP_FUNC,
.v.func = alc269_fixup_pincfg_no_hp_to_lineout,
},
+ [ALC255_FIXUP_LIFEBOOK_U7x7_HEADSET_MIC] = {
+ .type = HDA_FIXUP_FUNC,
+ .v.func = alc269_fixup_pincfg_U7x7_headset_mic,
+ },
[ALC269_FIXUP_AMIC] = {
.type = HDA_FIXUP_PINS,
.v.pins = (const struct hda_pintbl[]) {
@@ -6308,6 +6326,7 @@ static const struct snd_pci_quirk alc269
SND_PCI_QUIRK(0x10cf, 0x159f, "Lifebook E780", ALC269_FIXUP_LIFEBOOK_NO_HP_TO_LINEOUT),
SND_PCI_QUIRK(0x10cf, 0x15dc, "Lifebook T731", ALC269_FIXUP_LIFEBOOK_HP_PIN),
SND_PCI_QUIRK(0x10cf, 0x1757, "Lifebook E752", ALC269_FIXUP_LIFEBOOK_HP_PIN),
+ SND_PCI_QUIRK(0x10cf, 0x1629, "Lifebook U7x7", ALC255_FIXUP_LIFEBOOK_U7x7_HEADSET_MIC),
SND_PCI_QUIRK(0x10cf, 0x1845, "Lifebook U904", ALC269_FIXUP_LIFEBOOK_EXTMIC),
SND_PCI_QUIRK(0x10ec, 0x10f2, "Intel Reference board", ALC700_FIXUP_INTEL_REFERENCE),
SND_PCI_QUIRK(0x144d, 0xc109, "Samsung Ativ book 9 (NP900X3G)", ALC269_FIXUP_INV_DMIC),
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Arnd Bergmann <[email protected]>
commit 16c3ada89cff9a8c2a0eea34ffa1aa20af3f6008 upstream.
With CONFIG_KASAN, we get an overly long stack frame due to inlining
the register access functions:
drivers/media/tuners/r820t.c: In function 'generic_set_freq.isra.7':
drivers/media/tuners/r820t.c:1334:1: error: the frame size of 2880 bytes is larger than 2048 bytes [-Werror=frame-larger-than=]
This is caused by a gcc bug that has now been fixed in gcc-8.
To work around the problem, we can pass the register data
through a local variable that older gcc versions can optimize
out as well.
Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=81715
Signed-off-by: Arnd Bergmann <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/media/tuners/r820t.c | 13 ++++++++-----
1 file changed, 8 insertions(+), 5 deletions(-)
--- a/drivers/media/tuners/r820t.c
+++ b/drivers/media/tuners/r820t.c
@@ -396,9 +396,11 @@ static int r820t_write(struct r820t_priv
return 0;
}
-static int r820t_write_reg(struct r820t_priv *priv, u8 reg, u8 val)
+static inline int r820t_write_reg(struct r820t_priv *priv, u8 reg, u8 val)
{
- return r820t_write(priv, reg, &val, 1);
+ u8 tmp = val; /* work around GCC PR81715 with asan-stack=1 */
+
+ return r820t_write(priv, reg, &tmp, 1);
}
static int r820t_read_cache_reg(struct r820t_priv *priv, int reg)
@@ -411,17 +413,18 @@ static int r820t_read_cache_reg(struct r
return -EINVAL;
}
-static int r820t_write_reg_mask(struct r820t_priv *priv, u8 reg, u8 val,
+static inline int r820t_write_reg_mask(struct r820t_priv *priv, u8 reg, u8 val,
u8 bit_mask)
{
+ u8 tmp = val;
int rc = r820t_read_cache_reg(priv, reg);
if (rc < 0)
return rc;
- val = (rc & ~bit_mask) | (val & bit_mask);
+ tmp = (rc & ~bit_mask) | (tmp & bit_mask);
- return r820t_write(priv, reg, &val, 1);
+ return r820t_write(priv, reg, &tmp, 1);
}
static int r820t_read(struct r820t_priv *priv, u8 reg, u8 *val, int len)
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Hui Wang <[email protected]>
commit 3f2f7c553d077be6a30cb96b2976a2c940bf5335 upstream.
One of them has the codec of alc256 and the other one has the codec
of alc289.
Cc: <[email protected]>
Signed-off-by: Hui Wang <[email protected]>
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
sound/pci/hda/patch_realtek.c | 9 +++++++++
1 file changed, 9 insertions(+)
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -6585,6 +6585,11 @@ static const struct snd_hda_pin_quirk al
{0x14, 0x90170110},
{0x21, 0x02211020}),
SND_HDA_PIN_QUIRK(0x10ec0256, 0x1028, "Dell", ALC255_FIXUP_DELL1_MIC_NO_PRESENCE,
+ {0x12, 0x90a60130},
+ {0x14, 0x90170110},
+ {0x14, 0x01011020},
+ {0x21, 0x0221101f}),
+ SND_HDA_PIN_QUIRK(0x10ec0256, 0x1028, "Dell", ALC255_FIXUP_DELL1_MIC_NO_PRESENCE,
ALC256_STANDARD_PINS),
SND_HDA_PIN_QUIRK(0x10ec0256, 0x1043, "ASUS", ALC256_FIXUP_ASUS_MIC,
{0x14, 0x90170110},
@@ -6653,6 +6658,10 @@ static const struct snd_hda_pin_quirk al
{0x12, 0x90a60120},
{0x14, 0x90170110},
{0x21, 0x0321101f}),
+ SND_HDA_PIN_QUIRK(0x10ec0289, 0x1028, "Dell", ALC225_FIXUP_DELL1_MIC_NO_PRESENCE,
+ {0x12, 0xb7a60130},
+ {0x14, 0x90170110},
+ {0x21, 0x04211020}),
SND_HDA_PIN_QUIRK(0x10ec0290, 0x103c, "HP", ALC269_FIXUP_HP_MUTE_LED_MIC1,
ALC290_STANDARD_PINS,
{0x15, 0x04211040},
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Kailang Yang <[email protected]>
commit 40e2c4e5a7efcd50983aacbddd3c617e776018bf upstream.
This platform had two Dmic and single Dmic.
This update was for single Dmic.
This commit was for two Dmic.
Fixes: 75ee94b20b46 ("ALSA: hda - fix headset mic problem for Dell machines...")
Signed-off-by: Kailang Yang <[email protected]>
Cc: <[email protected]>
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
sound/pci/hda/patch_realtek.c | 2 ++
1 file changed, 2 insertions(+)
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -6176,6 +6176,8 @@ static const struct snd_pci_quirk alc269
SND_PCI_QUIRK(0x1028, 0x075d, "Dell AIO", ALC298_FIXUP_SPK_VOLUME),
SND_PCI_QUIRK(0x1028, 0x0798, "Dell Inspiron 17 7000 Gaming", ALC256_FIXUP_DELL_INSPIRON_7559_SUBWOOFER),
SND_PCI_QUIRK(0x1028, 0x082a, "Dell XPS 13 9360", ALC256_FIXUP_DELL_XPS_13_HEADPHONE_NOISE),
+ SND_PCI_QUIRK(0x1028, 0x084b, "Dell", ALC274_FIXUP_DELL_AIO_LINEOUT_VERB),
+ SND_PCI_QUIRK(0x1028, 0x084e, "Dell", ALC274_FIXUP_DELL_AIO_LINEOUT_VERB),
SND_PCI_QUIRK(0x1028, 0x164a, "Dell", ALC293_FIXUP_DELL1_MIC_NO_PRESENCE),
SND_PCI_QUIRK(0x1028, 0x164b, "Dell", ALC293_FIXUP_DELL1_MIC_NO_PRESENCE),
SND_PCI_QUIRK(0x103c, 0x1586, "HP", ALC269_FIXUP_HP_MUTE_LED_MIC2),
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Liu Bo <[email protected]>
commit 55237a5f2431a72435e3ed39e4306e973c0446b7 upstream.
It's possible that btrfs_sync_log() bails out after one of the two
btrfs_write_marked_extents() which convert extent state's state bit into
EXTENT_NEED_WAIT from EXTENT_DIRTY/EXTENT_NEW, however only EXTENT_DIRTY
and EXTENT_NEW are searched by free_log_tree() so that those extent states
with EXTENT_NEED_WAIT lead to memory leak.
cc: <[email protected]>
Signed-off-by: Liu Bo <[email protected]>
Reviewed-by: Josef Bacik <[email protected]>
Signed-off-by: David Sterba <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/btrfs/tree-log.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
--- a/fs/btrfs/tree-log.c
+++ b/fs/btrfs/tree-log.c
@@ -3047,13 +3047,14 @@ static void free_log_tree(struct btrfs_t
while (1) {
ret = find_first_extent_bit(&log->dirty_log_pages,
- 0, &start, &end, EXTENT_DIRTY | EXTENT_NEW,
+ 0, &start, &end,
+ EXTENT_DIRTY | EXTENT_NEW | EXTENT_NEED_WAIT,
NULL);
if (ret)
break;
clear_extent_bits(&log->dirty_log_pages, start, end,
- EXTENT_DIRTY | EXTENT_NEW);
+ EXTENT_DIRTY | EXTENT_NEW | EXTENT_NEED_WAIT);
}
/*
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jens Axboe <[email protected]>
commit 5235553d821433e1f4fa720fd025d2c4b7ee9994 upstream.
Mikulas reported a workload that saw bad performance, and figured
out what it was due to various other types of requests being
accounted as reads. Flush requests, for instance. Due to the
high latency of those, we heavily throttle the writes to keep
the latencies in balance. But they really should be accounted
as writes.
Fix this by checking the exact type of the request. If it's a
read, account as a read, if it's a write or a flush, account
as a write. Any other request we disregard. Previously everything
would have been mistakenly accounted as reads.
Reported-by: Mikulas Patocka <[email protected]>
Cc: [email protected] # v4.12+
Signed-off-by: Jens Axboe <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
block/blk-wbt.c | 10 +++++++++-
1 file changed, 9 insertions(+), 1 deletion(-)
--- a/block/blk-wbt.c
+++ b/block/blk-wbt.c
@@ -698,7 +698,15 @@ u64 wbt_default_latency_nsec(struct requ
static int wbt_data_dir(const struct request *rq)
{
- return rq_data_dir(rq);
+ const int op = req_op(rq);
+
+ if (op == REQ_OP_READ)
+ return READ;
+ else if (op == REQ_OP_WRITE || op == REQ_OP_FLUSH)
+ return WRITE;
+
+ /* don't account */
+ return -1;
}
int wbt_init(struct request_queue *q)
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Chuck Lever <[email protected]>
commit 1179e2c27efe21167ec9d882b14becefba2ee990 upstream.
Commit 16f906d66cd7 ("xprtrdma: Reduce required number of send
SGEs") introduced the rpcrdma_ia::ri_max_send_sges field. This fixes
a problem where xprtrdma would not work if the device's max_sge
capability was small (low single digits).
At least RPCRDMA_MIN_SEND_SGES are needed for the inline parts of
each RPC. ri_max_send_sges is set to this value:
ia->ri_max_send_sges = max_sge - RPCRDMA_MIN_SEND_SGES;
Then when marshaling each RPC, rpcrdma_args_inline uses that value
to determine whether the device has enough Send SGEs to convey an
NFS WRITE payload inline, or whether instead a Read chunk is
required.
More recently, commit ae72950abf99 ("xprtrdma: Add data structure to
manage RDMA Send arguments") used the ri_max_send_sges value to
calculate the size of an array, but that commit erroneously assumed
ri_max_send_sges contains a value similar to the device's max_sge,
and not one that was reduced by the minimum SGE count.
This assumption results in the calculated size of the sendctx's
Send SGE array to be too small. When the array is used to marshal
an RPC, the code can write Send SGEs into the following sendctx
element in that array, corrupting it. When the device's max_sge is
large, this issue is entirely harmless; but it results in an oops
in the provider's post_send method, if dev.attrs.max_sge is small.
So let's straighten this out: ri_max_send_sges will now contain a
value with the same meaning as dev.attrs.max_sge, which makes
the code easier to understand, and enables rpcrdma_sendctx_create
to calculate the size of the SGE array correctly.
Reported-by: Michal Kalderon <[email protected]>
Fixes: 16f906d66cd7 ("xprtrdma: Reduce required number of send SGEs")
Signed-off-by: Chuck Lever <[email protected]>
Tested-by: Michal Kalderon <[email protected]>
Cc: [email protected] # v4.10+
Signed-off-by: Anna Schumaker <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/sunrpc/xprtrdma/rpc_rdma.c | 2 +-
net/sunrpc/xprtrdma/verbs.c | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
--- a/net/sunrpc/xprtrdma/rpc_rdma.c
+++ b/net/sunrpc/xprtrdma/rpc_rdma.c
@@ -142,7 +142,7 @@ static bool rpcrdma_args_inline(struct r
if (xdr->page_len) {
remaining = xdr->page_len;
offset = offset_in_page(xdr->page_base);
- count = 0;
+ count = RPCRDMA_MIN_SEND_SGES;
while (remaining) {
remaining -= min_t(unsigned int,
PAGE_SIZE - offset, remaining);
--- a/net/sunrpc/xprtrdma/verbs.c
+++ b/net/sunrpc/xprtrdma/verbs.c
@@ -523,7 +523,7 @@ rpcrdma_ep_create(struct rpcrdma_ep *ep,
pr_warn("rpcrdma: HCA provides only %d send SGEs\n", max_sge);
return -ENOMEM;
}
- ia->ri_max_send_sges = max_sge - RPCRDMA_MIN_SEND_SGES;
+ ia->ri_max_send_sges = max_sge;
if (ia->ri_device->attrs.max_qp_wr <= RPCRDMA_BACKWARD_WRS) {
dprintk("RPC: %s: insufficient wqe's available\n",
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Dan Williams <[email protected]>
commit 3968523f855050b8195134da951b87c20bd66130 upstream.
mpls_label_ok() validates that the 'platform_label' array index from a
userspace netlink message payload is valid. Under speculation the
mpls_label_ok() result may not resolve in the CPU pipeline until after
the index is used to access an array element. Sanitize the index to zero
to prevent userspace-controlled arbitrary out-of-bounds speculation, a
precursor for a speculative execution side channel vulnerability.
Cc: <[email protected]>
Cc: "David S. Miller" <[email protected]>
Cc: Eric W. Biederman <[email protected]>
Signed-off-by: Dan Williams <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/mpls/af_mpls.c | 24 ++++++++++++++----------
1 file changed, 14 insertions(+), 10 deletions(-)
--- a/net/mpls/af_mpls.c
+++ b/net/mpls/af_mpls.c
@@ -8,6 +8,7 @@
#include <linux/ipv6.h>
#include <linux/mpls.h>
#include <linux/netconf.h>
+#include <linux/nospec.h>
#include <linux/vmalloc.h>
#include <linux/percpu.h>
#include <net/ip.h>
@@ -904,24 +905,27 @@ errout:
return err;
}
-static bool mpls_label_ok(struct net *net, unsigned int index,
+static bool mpls_label_ok(struct net *net, unsigned int *index,
struct netlink_ext_ack *extack)
{
+ bool is_ok = true;
+
/* Reserved labels may not be set */
- if (index < MPLS_LABEL_FIRST_UNRESERVED) {
+ if (*index < MPLS_LABEL_FIRST_UNRESERVED) {
NL_SET_ERR_MSG(extack,
"Invalid label - must be MPLS_LABEL_FIRST_UNRESERVED or higher");
- return false;
+ is_ok = false;
}
/* The full 20 bit range may not be supported. */
- if (index >= net->mpls.platform_labels) {
+ if (is_ok && *index >= net->mpls.platform_labels) {
NL_SET_ERR_MSG(extack,
"Label >= configured maximum in platform_labels");
- return false;
+ is_ok = false;
}
- return true;
+ *index = array_index_nospec(*index, net->mpls.platform_labels);
+ return is_ok;
}
static int mpls_route_add(struct mpls_route_config *cfg,
@@ -944,7 +948,7 @@ static int mpls_route_add(struct mpls_ro
index = find_free_label(net);
}
- if (!mpls_label_ok(net, index, extack))
+ if (!mpls_label_ok(net, &index, extack))
goto errout;
/* Append makes no sense with mpls */
@@ -1021,7 +1025,7 @@ static int mpls_route_del(struct mpls_ro
index = cfg->rc_label;
- if (!mpls_label_ok(net, index, extack))
+ if (!mpls_label_ok(net, &index, extack))
goto errout;
mpls_route_update(net, index, NULL, &cfg->rc_nlinfo);
@@ -1779,7 +1783,7 @@ static int rtm_to_route_config(struct sk
goto errout;
if (!mpls_label_ok(cfg->rc_nlinfo.nl_net,
- cfg->rc_label, extack))
+ &cfg->rc_label, extack))
goto errout;
break;
}
@@ -2106,7 +2110,7 @@ static int mpls_getroute(struct sk_buff
goto errout;
}
- if (!mpls_label_ok(net, in_label, extack)) {
+ if (!mpls_label_ok(net, &in_label, extack)) {
err = -EINVAL;
goto errout;
}
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Dominik Brodowski <[email protected]>
commit d8e92de8ef952bed88c56c7a44c02d8dcae0984e upstream.
Replace a couple of magically connected buffer length literal constants with
a common definition that makes their relationship obvious. Also document
why our sscanf() usage is safe.
No intended functional changes.
Suggested-by: Ingo Molnar <[email protected]>
Signed-off-by: Dominik Brodowski <[email protected]>
Cc: Andrew Lutomirski <[email protected]>
Cc: Andy Lutomirski <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: [email protected]
Cc: [email protected]
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Ingo Molnar <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
tools/testing/selftests/x86/test_vdso.c | 11 ++++++++---
tools/testing/selftests/x86/test_vsyscall.c | 11 ++++++++---
2 files changed, 16 insertions(+), 6 deletions(-)
--- a/tools/testing/selftests/x86/test_vdso.c
+++ b/tools/testing/selftests/x86/test_vdso.c
@@ -26,6 +26,9 @@
# endif
#endif
+/* max length of lines in /proc/self/maps - anything longer is skipped here */
+#define MAPS_LINE_LEN 128
+
int nerrs = 0;
typedef long (*getcpu_t)(unsigned *, unsigned *, void *);
@@ -37,17 +40,19 @@ static void *vsyscall_getcpu(void)
{
#ifdef __x86_64__
FILE *maps;
- char line[128];
+ char line[MAPS_LINE_LEN];
bool found = false;
maps = fopen("/proc/self/maps", "r");
if (!maps) /* might still be present, but ignore it here, as we test vDSO not vsyscall */
return NULL;
- while (fgets(line, sizeof(line), maps)) {
+ while (fgets(line, MAPS_LINE_LEN, maps)) {
char r, x;
void *start, *end;
- char name[128];
+ char name[MAPS_LINE_LEN];
+
+ /* sscanf() is safe here as strlen(name) >= strlen(line) */
if (sscanf(line, "%p-%p %c-%cp %*x %*x:%*x %*u %s",
&start, &end, &r, &x, name) != 5)
continue;
--- a/tools/testing/selftests/x86/test_vsyscall.c
+++ b/tools/testing/selftests/x86/test_vsyscall.c
@@ -33,6 +33,9 @@
# endif
#endif
+/* max length of lines in /proc/self/maps - anything longer is skipped here */
+#define MAPS_LINE_LEN 128
+
static void sethandler(int sig, void (*handler)(int, siginfo_t *, void *),
int flags)
{
@@ -98,7 +101,7 @@ static int init_vsys(void)
#ifdef __x86_64__
int nerrs = 0;
FILE *maps;
- char line[128];
+ char line[MAPS_LINE_LEN];
bool found = false;
maps = fopen("/proc/self/maps", "r");
@@ -108,10 +111,12 @@ static int init_vsys(void)
return 0;
}
- while (fgets(line, sizeof(line), maps)) {
+ while (fgets(line, MAPS_LINE_LEN, maps)) {
char r, x;
void *start, *end;
- char name[128];
+ char name[MAPS_LINE_LEN];
+
+ /* sscanf() is safe here as strlen(name) >= strlen(line) */
if (sscanf(line, "%p-%p %c-%cp %*x %*x:%*x %*u %s",
&start, &end, &r, &x, name) != 5)
continue;
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Johan Hovold <[email protected]>
commit eac56aa3bc8af3d9b9850345d0f2da9d83529134 upstream.
Fix child-node lookup during initialisation which was using the wrong
OF-helper and ended up searching the whole device tree depth-first
starting at the parent rather than just matching on its children.
To make things worse, the parent pci node could end up being prematurely
freed as of_find_node_by_name() drops a reference to its first argument.
Any matching child interrupt-controller node was also leaked.
Fixes: 0c4ffcfe1fbc ("PCI: keystone: Add TI Keystone PCIe driver")
Cc: stable <[email protected]> # 3.18
Acked-by: Murali Karicheri <[email protected]>
Signed-off-by: Johan Hovold <[email protected]>
[[email protected]: updated commit subject]
Signed-off-by: Lorenzo Pieralisi <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/pci/dwc/pci-keystone.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
--- a/drivers/pci/dwc/pci-keystone.c
+++ b/drivers/pci/dwc/pci-keystone.c
@@ -178,7 +178,7 @@ static int ks_pcie_get_irq_controller_in
}
/* interrupt controller is in a child node */
- *np_temp = of_find_node_by_name(np_pcie, controller);
+ *np_temp = of_get_child_by_name(np_pcie, controller);
if (!(*np_temp)) {
dev_err(dev, "Node for %s is absent\n", controller);
return -EINVAL;
@@ -187,6 +187,7 @@ static int ks_pcie_get_irq_controller_in
temp = of_irq_count(*np_temp);
if (!temp) {
dev_err(dev, "No IRQ entries in %s\n", controller);
+ of_node_put(*np_temp);
return -EINVAL;
}
@@ -204,6 +205,8 @@ static int ks_pcie_get_irq_controller_in
break;
}
+ of_node_put(*np_temp);
+
if (temp) {
*num_irqs = temp;
return 0;
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Ilya Dryomov <[email protected]>
commit e573427a440fd67d3f522357d7ac901d59281948 upstream.
This feature bit restricts older clients from performing certain
maintenance operations against an image (e.g. clone, snap create).
krbd does not perform maintenance operations.
Cc: [email protected]
Signed-off-by: Ilya Dryomov <[email protected]>
Reviewed-by: Jason Dillaman <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/block/rbd.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
--- a/drivers/block/rbd.c
+++ b/drivers/block/rbd.c
@@ -124,11 +124,13 @@ static int atomic_dec_return_safe(atomic
#define RBD_FEATURE_STRIPINGV2 (1ULL<<1)
#define RBD_FEATURE_EXCLUSIVE_LOCK (1ULL<<2)
#define RBD_FEATURE_DATA_POOL (1ULL<<7)
+#define RBD_FEATURE_OPERATIONS (1ULL<<8)
#define RBD_FEATURES_ALL (RBD_FEATURE_LAYERING | \
RBD_FEATURE_STRIPINGV2 | \
RBD_FEATURE_EXCLUSIVE_LOCK | \
- RBD_FEATURE_DATA_POOL)
+ RBD_FEATURE_DATA_POOL | \
+ RBD_FEATURE_OPERATIONS)
/* Features supported by this (client software) implementation. */
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Alexander Potapenko <[email protected]>
commit 3876bbe27d04b848750d5310a37d6b76b593f648 upstream.
KMSAN reported use of uninitialized |entry->e_referenced| in a condition
in mb_cache_shrink():
==================================================================
BUG: KMSAN: use of uninitialized memory in mb_cache_shrink+0x3b4/0xc50 fs/mbcache.c:287
CPU: 2 PID: 816 Comm: kswapd1 Not tainted 4.11.0-rc5+ #2877
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs
01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:16 [inline]
dump_stack+0x172/0x1c0 lib/dump_stack.c:52
kmsan_report+0x12a/0x180 mm/kmsan/kmsan.c:927
__msan_warning_32+0x61/0xb0 mm/kmsan/kmsan_instr.c:469
mb_cache_shrink+0x3b4/0xc50 fs/mbcache.c:287
mb_cache_scan+0x67/0x80 fs/mbcache.c:321
do_shrink_slab mm/vmscan.c:397 [inline]
shrink_slab+0xc3d/0x12d0 mm/vmscan.c:500
shrink_node+0x208f/0x2fd0 mm/vmscan.c:2603
kswapd_shrink_node mm/vmscan.c:3172 [inline]
balance_pgdat mm/vmscan.c:3289 [inline]
kswapd+0x160f/0x2850 mm/vmscan.c:3478
kthread+0x46c/0x5f0 kernel/kthread.c:230
ret_from_fork+0x29/0x40 arch/x86/entry/entry_64.S:430
chained origin:
save_stack_trace+0x37/0x40 arch/x86/kernel/stacktrace.c:59
kmsan_save_stack_with_flags mm/kmsan/kmsan.c:302 [inline]
kmsan_save_stack mm/kmsan/kmsan.c:317 [inline]
kmsan_internal_chain_origin+0x12a/0x1f0 mm/kmsan/kmsan.c:547
__msan_store_shadow_origin_1+0xac/0x110 mm/kmsan/kmsan_instr.c:257
mb_cache_entry_create+0x3b3/0xc60 fs/mbcache.c:95
ext4_xattr_cache_insert fs/ext4/xattr.c:1647 [inline]
ext4_xattr_block_set+0x4c82/0x5530 fs/ext4/xattr.c:1022
ext4_xattr_set_handle+0x1332/0x20a0 fs/ext4/xattr.c:1252
ext4_xattr_set+0x4d2/0x680 fs/ext4/xattr.c:1306
ext4_xattr_trusted_set+0x8d/0xa0 fs/ext4/xattr_trusted.c:36
__vfs_setxattr+0x703/0x790 fs/xattr.c:149
__vfs_setxattr_noperm+0x27a/0x6f0 fs/xattr.c:180
vfs_setxattr fs/xattr.c:223 [inline]
setxattr+0x6ae/0x790 fs/xattr.c:449
path_setxattr+0x1eb/0x380 fs/xattr.c:468
SYSC_lsetxattr+0x8d/0xb0 fs/xattr.c:490
SyS_lsetxattr+0x77/0xa0 fs/xattr.c:486
entry_SYSCALL_64_fastpath+0x13/0x94
origin:
save_stack_trace+0x37/0x40 arch/x86/kernel/stacktrace.c:59
kmsan_save_stack_with_flags mm/kmsan/kmsan.c:302 [inline]
kmsan_internal_poison_shadow+0xb1/0x1a0 mm/kmsan/kmsan.c:198
kmsan_kmalloc+0x7f/0xe0 mm/kmsan/kmsan.c:337
kmem_cache_alloc+0x1c2/0x1e0 mm/slub.c:2766
mb_cache_entry_create+0x283/0xc60 fs/mbcache.c:86
ext4_xattr_cache_insert fs/ext4/xattr.c:1647 [inline]
ext4_xattr_block_set+0x4c82/0x5530 fs/ext4/xattr.c:1022
ext4_xattr_set_handle+0x1332/0x20a0 fs/ext4/xattr.c:1252
ext4_xattr_set+0x4d2/0x680 fs/ext4/xattr.c:1306
ext4_xattr_trusted_set+0x8d/0xa0 fs/ext4/xattr_trusted.c:36
__vfs_setxattr+0x703/0x790 fs/xattr.c:149
__vfs_setxattr_noperm+0x27a/0x6f0 fs/xattr.c:180
vfs_setxattr fs/xattr.c:223 [inline]
setxattr+0x6ae/0x790 fs/xattr.c:449
path_setxattr+0x1eb/0x380 fs/xattr.c:468
SYSC_lsetxattr+0x8d/0xb0 fs/xattr.c:490
SyS_lsetxattr+0x77/0xa0 fs/xattr.c:486
entry_SYSCALL_64_fastpath+0x13/0x94
==================================================================
Signed-off-by: Alexander Potapenko <[email protected]>
Signed-off-by: Eric Biggers <[email protected]>
Cc: [email protected] # v4.6
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/mbcache.c | 1 +
1 file changed, 1 insertion(+)
--- a/fs/mbcache.c
+++ b/fs/mbcache.c
@@ -94,6 +94,7 @@ int mb_cache_entry_create(struct mb_cach
entry->e_key = key;
entry->e_value = value;
entry->e_reusable = reusable;
+ entry->e_referenced = 0;
head = mb_cache_entry_head(cache, key);
hlist_bl_lock(head);
hlist_bl_for_each_entry(dup, dup_node, head, e_hash_list) {
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Daniel Vetter <[email protected]>
commit 24b8ef699e8221d2b7f813adaab13eec053e1507 upstream.
In the past the ast driver relied upon the fbdev emulation helpers to
call ->load_lut at boot-up. But since
commit b8e2b0199cc377617dc238f5106352c06dcd3fa2
Author: Peter Rosin <[email protected]>
Date: Tue Jul 4 12:36:57 2017 +0200
drm/fb-helper: factor out pseudo-palette
that's cleaned up and drivers are expected to boot into a consistent
lut state. This patch fixes that.
Fixes: b8e2b0199cc3 ("drm/fb-helper: factor out pseudo-palette")
Cc: Peter Rosin <[email protected]>
Cc: Daniel Vetter <[email protected]>
Cc: <[email protected]> # v4.14+
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=198123
Cc: Bill Fraser <[email protected]>
Reported-and-Tested-by: Bill Fraser <[email protected]>
Signed-off-by: Daniel Vetter <[email protected]>
Signed-off-by: Dave Airlie <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpu/drm/ast/ast_mode.c | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/gpu/drm/ast/ast_mode.c
+++ b/drivers/gpu/drm/ast/ast_mode.c
@@ -644,6 +644,7 @@ static void ast_crtc_commit(struct drm_c
{
struct ast_private *ast = crtc->dev->dev_private;
ast_set_index_reg_mask(ast, AST_IO_SEQ_PORT, 0x1, 0xdf, 0);
+ ast_crtc_load_lut(crtc);
}
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Ray Strode <[email protected]>
commit 16c6db3688734b27487a42d0c2a1062d0b2bad03 upstream.
qxl_cursor_atomic_update allocs a bo for the cursor that
it never frees up at the end of the function.
This commit fixes that.
Signed-off-by: Ray Strode <[email protected]>
Cc: [email protected]
Signed-off-by: Dave Airlie <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpu/drm/qxl/qxl_display.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
--- a/drivers/gpu/drm/qxl/qxl_display.c
+++ b/drivers/gpu/drm/qxl/qxl_display.c
@@ -564,7 +564,7 @@ static void qxl_cursor_atomic_update(str
struct qxl_cursor_cmd *cmd;
struct qxl_cursor *cursor;
struct drm_gem_object *obj;
- struct qxl_bo *cursor_bo, *user_bo = NULL;
+ struct qxl_bo *cursor_bo = NULL, *user_bo = NULL;
int ret;
void *user_ptr;
int size = 64*64*4;
@@ -634,6 +634,8 @@ static void qxl_cursor_atomic_update(str
qxl_push_cursor_ring_release(qdev, release, QXL_CMD_CURSOR, false);
qxl_release_fence_buffer_objects(release);
+ qxl_bo_unref(&cursor_bo);
+
return;
out_backoff:
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Ingo Molnar <[email protected]>
commit e48657573481a5dff7cfdc3d57005c80aa816500 upstream.
Josh Poimboeuf noticed the following bug:
"The paranoid exit code only restores the saved CR3 when it switches back
to the user GS. However, even in the kernel GS case, it's possible that
it needs to restore a user CR3, if for example, the paranoid exception
occurred in the syscall exit path between SWITCH_TO_USER_CR3_STACK and
SWAPGS."
Josh also confirmed via targeted testing that it's possible to hit this bug.
Fix the bug by also restoring CR3 in the paranoid_exit_no_swapgs branch.
The reason we haven't seen this bug reported by users yet is probably because
"paranoid" entry points are limited to the following cases:
idtentry double_fault do_double_fault has_error_code=1 paranoid=2
idtentry debug do_debug has_error_code=0 paranoid=1 shift_ist=DEBUG_STACK
idtentry int3 do_int3 has_error_code=0 paranoid=1 shift_ist=DEBUG_STACK
idtentry machine_check do_mce has_error_code=0 paranoid=1
Amongst those entry points only machine_check is one that will interrupt an
IRQS-off critical section asynchronously - and machine check events are rare.
The other main asynchronous entries are NMI entries, which can be very high-freq
with perf profiling, but they are special: they don't use the 'idtentry' macro but
are open coded and restore user CR3 unconditionally so don't have this bug.
Reported-and-tested-by: Josh Poimboeuf <[email protected]>
Reviewed-by: Andy Lutomirski <[email protected]>
Acked-by: Thomas Gleixner <[email protected]>
Cc: Arjan van de Ven <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: Dan Williams <[email protected]>
Cc: Dave Hansen <[email protected]>
Cc: David Woodhouse <[email protected]>
Cc: Greg Kroah-Hartman <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Ingo Molnar <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/entry/entry_64.S | 1 +
1 file changed, 1 insertion(+)
--- a/arch/x86/entry/entry_64.S
+++ b/arch/x86/entry/entry_64.S
@@ -1162,6 +1162,7 @@ ENTRY(paranoid_exit)
jmp .Lparanoid_exit_restore
.Lparanoid_exit_no_swapgs:
TRACE_IRQS_IRETQ_DEBUG
+ RESTORE_CR3 scratch_reg=%rbx save_reg=%r14
.Lparanoid_exit_restore:
jmp restore_regs_and_return_to_kernel
END(paranoid_exit)
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Rui Wang <[email protected]>
commit 961888b1d76d84efc66a8f5604b06ac12ac2f978 upstream.
For distributions with old userspace header files, the _sigfault
structure is different. mpx-mini-test fails with the following
error:
[root@Purley]# mpx-mini-test_64 tabletest
XSAVE is supported by HW & OS
XSAVE processor supported state mask: 0x2ff
XSAVE OS supported state mask: 0x2ff
BNDREGS: size: 64 user: 1 supervisor: 0 aligned: 0
BNDCSR: size: 64 user: 1 supervisor: 0 aligned: 0
starting mpx bounds table test
ERROR: siginfo bounds do not match shadow bounds for register 0
Fix it by using the correct offset of _lower/_upper in _sigfault.
RHEL needs this patch to work.
Signed-off-by: Rui Wang <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: [email protected]
Fixes: e754aedc26ef ("x86/mpx, selftests: Add MPX self test")
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Ingo Molnar <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
tools/testing/selftests/x86/mpx-mini-test.c | 32 ++++++++++++++++++++++++++--
1 file changed, 30 insertions(+), 2 deletions(-)
--- a/tools/testing/selftests/x86/mpx-mini-test.c
+++ b/tools/testing/selftests/x86/mpx-mini-test.c
@@ -315,11 +315,39 @@ static inline void *__si_bounds_upper(si
return si->si_upper;
}
#else
+
+/*
+ * This deals with old version of _sigfault in some distros:
+ *
+
+old _sigfault:
+ struct {
+ void *si_addr;
+ } _sigfault;
+
+new _sigfault:
+ struct {
+ void __user *_addr;
+ int _trapno;
+ short _addr_lsb;
+ union {
+ struct {
+ void __user *_lower;
+ void __user *_upper;
+ } _addr_bnd;
+ __u32 _pkey;
+ };
+ } _sigfault;
+ *
+ */
+
static inline void **__si_bounds_hack(siginfo_t *si)
{
void *sigfault = &si->_sifields._sigfault;
void *end_sigfault = sigfault + sizeof(si->_sifields._sigfault);
- void **__si_lower = end_sigfault;
+ int *trapno = (int*)end_sigfault;
+ /* skip _trapno and _addr_lsb */
+ void **__si_lower = (void**)(trapno + 2);
return __si_lower;
}
@@ -331,7 +359,7 @@ static inline void *__si_bounds_lower(si
static inline void *__si_bounds_upper(siginfo_t *si)
{
- return (*__si_bounds_hack(si)) + sizeof(void *);
+ return *(__si_bounds_hack(si) + 1);
}
#endif
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jia Zhang <[email protected]>
commit b399151cb48db30ad1e0e93dd40d68c6d007b637 upstream.
x86_mask is a confusing name which is hard to associate with the
processor's stepping.
Additionally, correct an indent issue in lib/cpu.c.
Signed-off-by: Jia Zhang <[email protected]>
[ Updated it to more recent kernels. ]
Cc: Linus Torvalds <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: [email protected]
Cc: [email protected]
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Ingo Molnar <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/events/intel/core.c | 2 +-
arch/x86/events/intel/lbr.c | 2 +-
arch/x86/events/intel/p6.c | 2 +-
arch/x86/include/asm/acpi.h | 2 +-
arch/x86/include/asm/processor.h | 2 +-
arch/x86/kernel/amd_nb.c | 2 +-
arch/x86/kernel/apic/apic.c | 6 +++---
arch/x86/kernel/asm-offsets_32.c | 2 +-
arch/x86/kernel/cpu/amd.c | 28 ++++++++++++++--------------
arch/x86/kernel/cpu/centaur.c | 4 ++--
arch/x86/kernel/cpu/common.c | 8 ++++----
arch/x86/kernel/cpu/cyrix.c | 2 +-
arch/x86/kernel/cpu/intel.c | 18 +++++++++---------
arch/x86/kernel/cpu/intel_rdt.c | 2 +-
arch/x86/kernel/cpu/microcode/intel.c | 4 ++--
arch/x86/kernel/cpu/mtrr/generic.c | 2 +-
arch/x86/kernel/cpu/mtrr/main.c | 4 ++--
arch/x86/kernel/cpu/proc.c | 4 ++--
arch/x86/kernel/head_32.S | 4 ++--
arch/x86/kernel/mpparse.c | 2 +-
arch/x86/lib/cpu.c | 2 +-
drivers/char/hw_random/via-rng.c | 2 +-
drivers/cpufreq/acpi-cpufreq.c | 2 +-
drivers/cpufreq/longhaul.c | 6 +++---
drivers/cpufreq/p4-clockmod.c | 2 +-
drivers/cpufreq/powernow-k7.c | 2 +-
drivers/cpufreq/speedstep-centrino.c | 4 ++--
drivers/cpufreq/speedstep-lib.c | 6 +++---
drivers/crypto/padlock-aes.c | 2 +-
drivers/edac/amd64_edac.c | 2 +-
drivers/hwmon/coretemp.c | 6 +++---
drivers/hwmon/hwmon-vid.c | 2 +-
drivers/hwmon/k10temp.c | 2 +-
drivers/hwmon/k8temp.c | 2 +-
drivers/video/fbdev/geode/video_gx.c | 2 +-
35 files changed, 73 insertions(+), 73 deletions(-)
--- a/arch/x86/events/intel/core.c
+++ b/arch/x86/events/intel/core.c
@@ -3559,7 +3559,7 @@ static int intel_snb_pebs_broken(int cpu
break;
case INTEL_FAM6_SANDYBRIDGE_X:
- switch (cpu_data(cpu).x86_mask) {
+ switch (cpu_data(cpu).x86_stepping) {
case 6: rev = 0x618; break;
case 7: rev = 0x70c; break;
}
--- a/arch/x86/events/intel/lbr.c
+++ b/arch/x86/events/intel/lbr.c
@@ -1186,7 +1186,7 @@ void __init intel_pmu_lbr_init_atom(void
* on PMU interrupt
*/
if (boot_cpu_data.x86_model == 28
- && boot_cpu_data.x86_mask < 10) {
+ && boot_cpu_data.x86_stepping < 10) {
pr_cont("LBR disabled due to erratum");
return;
}
--- a/arch/x86/events/intel/p6.c
+++ b/arch/x86/events/intel/p6.c
@@ -234,7 +234,7 @@ static __initconst const struct x86_pmu
static __init void p6_pmu_rdpmc_quirk(void)
{
- if (boot_cpu_data.x86_mask < 9) {
+ if (boot_cpu_data.x86_stepping < 9) {
/*
* PPro erratum 26; fixed in stepping 9 and above.
*/
--- a/arch/x86/include/asm/acpi.h
+++ b/arch/x86/include/asm/acpi.h
@@ -94,7 +94,7 @@ static inline unsigned int acpi_processo
if (boot_cpu_data.x86 == 0x0F &&
boot_cpu_data.x86_vendor == X86_VENDOR_AMD &&
boot_cpu_data.x86_model <= 0x05 &&
- boot_cpu_data.x86_mask < 0x0A)
+ boot_cpu_data.x86_stepping < 0x0A)
return 1;
else if (boot_cpu_has(X86_BUG_AMD_APIC_C1E))
return 1;
--- a/arch/x86/include/asm/processor.h
+++ b/arch/x86/include/asm/processor.h
@@ -91,7 +91,7 @@ struct cpuinfo_x86 {
__u8 x86; /* CPU family */
__u8 x86_vendor; /* CPU vendor */
__u8 x86_model;
- __u8 x86_mask;
+ __u8 x86_stepping;
#ifdef CONFIG_X86_64
/* Number of 4K pages in DTLB/ITLB combined(in pages): */
int x86_tlbsize;
--- a/arch/x86/kernel/amd_nb.c
+++ b/arch/x86/kernel/amd_nb.c
@@ -235,7 +235,7 @@ int amd_cache_northbridges(void)
if (boot_cpu_data.x86 == 0x10 &&
boot_cpu_data.x86_model >= 0x8 &&
(boot_cpu_data.x86_model > 0x9 ||
- boot_cpu_data.x86_mask >= 0x1))
+ boot_cpu_data.x86_stepping >= 0x1))
amd_northbridges.flags |= AMD_NB_L3_INDEX_DISABLE;
if (boot_cpu_data.x86 == 0x15)
--- a/arch/x86/kernel/apic/apic.c
+++ b/arch/x86/kernel/apic/apic.c
@@ -553,7 +553,7 @@ static DEFINE_PER_CPU(struct clock_event
static u32 hsx_deadline_rev(void)
{
- switch (boot_cpu_data.x86_mask) {
+ switch (boot_cpu_data.x86_stepping) {
case 0x02: return 0x3a; /* EP */
case 0x04: return 0x0f; /* EX */
}
@@ -563,7 +563,7 @@ static u32 hsx_deadline_rev(void)
static u32 bdx_deadline_rev(void)
{
- switch (boot_cpu_data.x86_mask) {
+ switch (boot_cpu_data.x86_stepping) {
case 0x02: return 0x00000011;
case 0x03: return 0x0700000e;
case 0x04: return 0x0f00000c;
@@ -575,7 +575,7 @@ static u32 bdx_deadline_rev(void)
static u32 skx_deadline_rev(void)
{
- switch (boot_cpu_data.x86_mask) {
+ switch (boot_cpu_data.x86_stepping) {
case 0x03: return 0x01000136;
case 0x04: return 0x02000014;
}
--- a/arch/x86/kernel/asm-offsets_32.c
+++ b/arch/x86/kernel/asm-offsets_32.c
@@ -18,7 +18,7 @@ void foo(void)
OFFSET(CPUINFO_x86, cpuinfo_x86, x86);
OFFSET(CPUINFO_x86_vendor, cpuinfo_x86, x86_vendor);
OFFSET(CPUINFO_x86_model, cpuinfo_x86, x86_model);
- OFFSET(CPUINFO_x86_mask, cpuinfo_x86, x86_mask);
+ OFFSET(CPUINFO_x86_stepping, cpuinfo_x86, x86_stepping);
OFFSET(CPUINFO_cpuid_level, cpuinfo_x86, cpuid_level);
OFFSET(CPUINFO_x86_capability, cpuinfo_x86, x86_capability);
OFFSET(CPUINFO_x86_vendor_id, cpuinfo_x86, x86_vendor_id);
--- a/arch/x86/kernel/cpu/amd.c
+++ b/arch/x86/kernel/cpu/amd.c
@@ -119,7 +119,7 @@ static void init_amd_k6(struct cpuinfo_x
return;
}
- if (c->x86_model == 6 && c->x86_mask == 1) {
+ if (c->x86_model == 6 && c->x86_stepping == 1) {
const int K6_BUG_LOOP = 1000000;
int n;
void (*f_vide)(void);
@@ -149,7 +149,7 @@ static void init_amd_k6(struct cpuinfo_x
/* K6 with old style WHCR */
if (c->x86_model < 8 ||
- (c->x86_model == 8 && c->x86_mask < 8)) {
+ (c->x86_model == 8 && c->x86_stepping < 8)) {
/* We can only write allocate on the low 508Mb */
if (mbytes > 508)
mbytes = 508;
@@ -168,7 +168,7 @@ static void init_amd_k6(struct cpuinfo_x
return;
}
- if ((c->x86_model == 8 && c->x86_mask > 7) ||
+ if ((c->x86_model == 8 && c->x86_stepping > 7) ||
c->x86_model == 9 || c->x86_model == 13) {
/* The more serious chips .. */
@@ -221,7 +221,7 @@ static void init_amd_k7(struct cpuinfo_x
* are more robust with CLK_CTL set to 200xxxxx instead of 600xxxxx
* As per AMD technical note 27212 0.2
*/
- if ((c->x86_model == 8 && c->x86_mask >= 1) || (c->x86_model > 8)) {
+ if ((c->x86_model == 8 && c->x86_stepping >= 1) || (c->x86_model > 8)) {
rdmsr(MSR_K7_CLK_CTL, l, h);
if ((l & 0xfff00000) != 0x20000000) {
pr_info("CPU: CLK_CTL MSR was %x. Reprogramming to %x\n",
@@ -241,12 +241,12 @@ static void init_amd_k7(struct cpuinfo_x
* but they are not certified as MP capable.
*/
/* Athlon 660/661 is valid. */
- if ((c->x86_model == 6) && ((c->x86_mask == 0) ||
- (c->x86_mask == 1)))
+ if ((c->x86_model == 6) && ((c->x86_stepping == 0) ||
+ (c->x86_stepping == 1)))
return;
/* Duron 670 is valid */
- if ((c->x86_model == 7) && (c->x86_mask == 0))
+ if ((c->x86_model == 7) && (c->x86_stepping == 0))
return;
/*
@@ -256,8 +256,8 @@ static void init_amd_k7(struct cpuinfo_x
* See http://www.heise.de/newsticker/data/jow-18.10.01-000 for
* more.
*/
- if (((c->x86_model == 6) && (c->x86_mask >= 2)) ||
- ((c->x86_model == 7) && (c->x86_mask >= 1)) ||
+ if (((c->x86_model == 6) && (c->x86_stepping >= 2)) ||
+ ((c->x86_model == 7) && (c->x86_stepping >= 1)) ||
(c->x86_model > 7))
if (cpu_has(c, X86_FEATURE_MP))
return;
@@ -583,7 +583,7 @@ static void early_init_amd(struct cpuinf
/* Set MTRR capability flag if appropriate */
if (c->x86 == 5)
if (c->x86_model == 13 || c->x86_model == 9 ||
- (c->x86_model == 8 && c->x86_mask >= 8))
+ (c->x86_model == 8 && c->x86_stepping >= 8))
set_cpu_cap(c, X86_FEATURE_K6_MTRR);
#endif
#if defined(CONFIG_X86_LOCAL_APIC) && defined(CONFIG_PCI)
@@ -769,7 +769,7 @@ static void init_amd_zn(struct cpuinfo_x
* Fix erratum 1076: CPB feature bit not being set in CPUID. It affects
* all up to and including B1.
*/
- if (c->x86_model <= 1 && c->x86_mask <= 1)
+ if (c->x86_model <= 1 && c->x86_stepping <= 1)
set_cpu_cap(c, X86_FEATURE_CPB);
}
@@ -880,11 +880,11 @@ static unsigned int amd_size_cache(struc
/* AMD errata T13 (order #21922) */
if ((c->x86 == 6)) {
/* Duron Rev A0 */
- if (c->x86_model == 3 && c->x86_mask == 0)
+ if (c->x86_model == 3 && c->x86_stepping == 0)
size = 64;
/* Tbird rev A1/A2 */
if (c->x86_model == 4 &&
- (c->x86_mask == 0 || c->x86_mask == 1))
+ (c->x86_stepping == 0 || c->x86_stepping == 1))
size = 256;
}
return size;
@@ -1021,7 +1021,7 @@ static bool cpu_has_amd_erratum(struct c
}
/* OSVW unavailable or ID unknown, match family-model-stepping range */
- ms = (cpu->x86_model << 4) | cpu->x86_mask;
+ ms = (cpu->x86_model << 4) | cpu->x86_stepping;
while ((range = *erratum++))
if ((cpu->x86 == AMD_MODEL_RANGE_FAMILY(range)) &&
(ms >= AMD_MODEL_RANGE_START(range)) &&
--- a/arch/x86/kernel/cpu/centaur.c
+++ b/arch/x86/kernel/cpu/centaur.c
@@ -136,7 +136,7 @@ static void init_centaur(struct cpuinfo_
clear_cpu_cap(c, X86_FEATURE_TSC);
break;
case 8:
- switch (c->x86_mask) {
+ switch (c->x86_stepping) {
default:
name = "2";
break;
@@ -211,7 +211,7 @@ centaur_size_cache(struct cpuinfo_x86 *c
* - Note, it seems this may only be in engineering samples.
*/
if ((c->x86 == 6) && (c->x86_model == 9) &&
- (c->x86_mask == 1) && (size == 65))
+ (c->x86_stepping == 1) && (size == 65))
size -= 1;
return size;
}
--- a/arch/x86/kernel/cpu/common.c
+++ b/arch/x86/kernel/cpu/common.c
@@ -707,7 +707,7 @@ void cpu_detect(struct cpuinfo_x86 *c)
cpuid(0x00000001, &tfms, &misc, &junk, &cap0);
c->x86 = x86_family(tfms);
c->x86_model = x86_model(tfms);
- c->x86_mask = x86_stepping(tfms);
+ c->x86_stepping = x86_stepping(tfms);
if (cap0 & (1<<19)) {
c->x86_clflush_size = ((misc >> 8) & 0xff) * 8;
@@ -1162,7 +1162,7 @@ static void identify_cpu(struct cpuinfo_
c->loops_per_jiffy = loops_per_jiffy;
c->x86_cache_size = -1;
c->x86_vendor = X86_VENDOR_UNKNOWN;
- c->x86_model = c->x86_mask = 0; /* So far unknown... */
+ c->x86_model = c->x86_stepping = 0; /* So far unknown... */
c->x86_vendor_id[0] = '\0'; /* Unset */
c->x86_model_id[0] = '\0'; /* Unset */
c->x86_max_cores = 1;
@@ -1353,8 +1353,8 @@ void print_cpu_info(struct cpuinfo_x86 *
pr_cont(" (family: 0x%x, model: 0x%x", c->x86, c->x86_model);
- if (c->x86_mask || c->cpuid_level >= 0)
- pr_cont(", stepping: 0x%x)\n", c->x86_mask);
+ if (c->x86_stepping || c->cpuid_level >= 0)
+ pr_cont(", stepping: 0x%x)\n", c->x86_stepping);
else
pr_cont(")\n");
}
--- a/arch/x86/kernel/cpu/cyrix.c
+++ b/arch/x86/kernel/cpu/cyrix.c
@@ -215,7 +215,7 @@ static void init_cyrix(struct cpuinfo_x8
/* common case step number/rev -- exceptions handled below */
c->x86_model = (dir1 >> 4) + 1;
- c->x86_mask = dir1 & 0xf;
+ c->x86_stepping = dir1 & 0xf;
/* Now cook; the original recipe is by Channing Corn, from Cyrix.
* We do the same thing for each generation: we work out
--- a/arch/x86/kernel/cpu/intel.c
+++ b/arch/x86/kernel/cpu/intel.c
@@ -146,7 +146,7 @@ static bool bad_spectre_microcode(struct
for (i = 0; i < ARRAY_SIZE(spectre_bad_microcodes); i++) {
if (c->x86_model == spectre_bad_microcodes[i].model &&
- c->x86_mask == spectre_bad_microcodes[i].stepping)
+ c->x86_stepping == spectre_bad_microcodes[i].stepping)
return (c->microcode <= spectre_bad_microcodes[i].microcode);
}
return false;
@@ -193,7 +193,7 @@ static void early_init_intel(struct cpui
* need the microcode to have already been loaded... so if it is
* not, recommend a BIOS update and disable large pages.
*/
- if (c->x86 == 6 && c->x86_model == 0x1c && c->x86_mask <= 2 &&
+ if (c->x86 == 6 && c->x86_model == 0x1c && c->x86_stepping <= 2 &&
c->microcode < 0x20e) {
pr_warn("Atom PSE erratum detected, BIOS microcode update recommended\n");
clear_cpu_cap(c, X86_FEATURE_PSE);
@@ -209,7 +209,7 @@ static void early_init_intel(struct cpui
/* CPUID workaround for 0F33/0F34 CPU */
if (c->x86 == 0xF && c->x86_model == 0x3
- && (c->x86_mask == 0x3 || c->x86_mask == 0x4))
+ && (c->x86_stepping == 0x3 || c->x86_stepping == 0x4))
c->x86_phys_bits = 36;
/*
@@ -307,7 +307,7 @@ int ppro_with_ram_bug(void)
if (boot_cpu_data.x86_vendor == X86_VENDOR_INTEL &&
boot_cpu_data.x86 == 6 &&
boot_cpu_data.x86_model == 1 &&
- boot_cpu_data.x86_mask < 8) {
+ boot_cpu_data.x86_stepping < 8) {
pr_info("Pentium Pro with Errata#50 detected. Taking evasive action.\n");
return 1;
}
@@ -324,7 +324,7 @@ static void intel_smp_check(struct cpuin
* Mask B, Pentium, but not Pentium MMX
*/
if (c->x86 == 5 &&
- c->x86_mask >= 1 && c->x86_mask <= 4 &&
+ c->x86_stepping >= 1 && c->x86_stepping <= 4 &&
c->x86_model <= 3) {
/*
* Remember we have B step Pentia with bugs
@@ -367,7 +367,7 @@ static void intel_workarounds(struct cpu
* SEP CPUID bug: Pentium Pro reports SEP but doesn't have it until
* model 3 mask 3
*/
- if ((c->x86<<8 | c->x86_model<<4 | c->x86_mask) < 0x633)
+ if ((c->x86<<8 | c->x86_model<<4 | c->x86_stepping) < 0x633)
clear_cpu_cap(c, X86_FEATURE_SEP);
/*
@@ -385,7 +385,7 @@ static void intel_workarounds(struct cpu
* P4 Xeon erratum 037 workaround.
* Hardware prefetcher may cause stale data to be loaded into the cache.
*/
- if ((c->x86 == 15) && (c->x86_model == 1) && (c->x86_mask == 1)) {
+ if ((c->x86 == 15) && (c->x86_model == 1) && (c->x86_stepping == 1)) {
if (msr_set_bit(MSR_IA32_MISC_ENABLE,
MSR_IA32_MISC_ENABLE_PREFETCH_DISABLE_BIT) > 0) {
pr_info("CPU: C0 stepping P4 Xeon detected.\n");
@@ -400,7 +400,7 @@ static void intel_workarounds(struct cpu
* Specification Update").
*/
if (boot_cpu_has(X86_FEATURE_APIC) && (c->x86<<8 | c->x86_model<<4) == 0x520 &&
- (c->x86_mask < 0x6 || c->x86_mask == 0xb))
+ (c->x86_stepping < 0x6 || c->x86_stepping == 0xb))
set_cpu_bug(c, X86_BUG_11AP);
@@ -647,7 +647,7 @@ static void init_intel(struct cpuinfo_x8
case 6:
if (l2 == 128)
p = "Celeron (Mendocino)";
- else if (c->x86_mask == 0 || c->x86_mask == 5)
+ else if (c->x86_stepping == 0 || c->x86_stepping == 5)
p = "Celeron-A";
break;
--- a/arch/x86/kernel/cpu/intel_rdt.c
+++ b/arch/x86/kernel/cpu/intel_rdt.c
@@ -771,7 +771,7 @@ static __init void rdt_quirks(void)
cache_alloc_hsw_probe();
break;
case INTEL_FAM6_SKYLAKE_X:
- if (boot_cpu_data.x86_mask <= 4)
+ if (boot_cpu_data.x86_stepping <= 4)
set_rdt_options("!cmt,!mbmtotal,!mbmlocal,!l3cat");
}
}
--- a/arch/x86/kernel/cpu/microcode/intel.c
+++ b/arch/x86/kernel/cpu/microcode/intel.c
@@ -921,7 +921,7 @@ static bool is_blacklisted(unsigned int
*/
if (c->x86 == 6 &&
c->x86_model == INTEL_FAM6_BROADWELL_X &&
- c->x86_mask == 0x01 &&
+ c->x86_stepping == 0x01 &&
llc_size_per_core > 2621440 &&
c->microcode < 0x0b000021) {
pr_err_once("Erratum BDF90: late loading with revision < 0x0b000021 (0x%x) disabled.\n", c->microcode);
@@ -944,7 +944,7 @@ static enum ucode_state request_microcod
return UCODE_NFOUND;
sprintf(name, "intel-ucode/%02x-%02x-%02x",
- c->x86, c->x86_model, c->x86_mask);
+ c->x86, c->x86_model, c->x86_stepping);
if (request_firmware_direct(&firmware, name, device)) {
pr_debug("data file %s load failed\n", name);
--- a/arch/x86/kernel/cpu/mtrr/generic.c
+++ b/arch/x86/kernel/cpu/mtrr/generic.c
@@ -859,7 +859,7 @@ int generic_validate_add_page(unsigned l
*/
if (is_cpu(INTEL) && boot_cpu_data.x86 == 6 &&
boot_cpu_data.x86_model == 1 &&
- boot_cpu_data.x86_mask <= 7) {
+ boot_cpu_data.x86_stepping <= 7) {
if (base & ((1 << (22 - PAGE_SHIFT)) - 1)) {
pr_warn("mtrr: base(0x%lx000) is not 4 MiB aligned\n", base);
return -EINVAL;
--- a/arch/x86/kernel/cpu/mtrr/main.c
+++ b/arch/x86/kernel/cpu/mtrr/main.c
@@ -711,8 +711,8 @@ void __init mtrr_bp_init(void)
if (boot_cpu_data.x86_vendor == X86_VENDOR_INTEL &&
boot_cpu_data.x86 == 0xF &&
boot_cpu_data.x86_model == 0x3 &&
- (boot_cpu_data.x86_mask == 0x3 ||
- boot_cpu_data.x86_mask == 0x4))
+ (boot_cpu_data.x86_stepping == 0x3 ||
+ boot_cpu_data.x86_stepping == 0x4))
phys_addr = 36;
size_or_mask = SIZE_OR_MASK_BITS(phys_addr);
--- a/arch/x86/kernel/cpu/proc.c
+++ b/arch/x86/kernel/cpu/proc.c
@@ -72,8 +72,8 @@ static int show_cpuinfo(struct seq_file
c->x86_model,
c->x86_model_id[0] ? c->x86_model_id : "unknown");
- if (c->x86_mask || c->cpuid_level >= 0)
- seq_printf(m, "stepping\t: %d\n", c->x86_mask);
+ if (c->x86_stepping || c->cpuid_level >= 0)
+ seq_printf(m, "stepping\t: %d\n", c->x86_stepping);
else
seq_puts(m, "stepping\t: unknown\n");
if (c->microcode)
--- a/arch/x86/kernel/head_32.S
+++ b/arch/x86/kernel/head_32.S
@@ -37,7 +37,7 @@
#define X86 new_cpu_data+CPUINFO_x86
#define X86_VENDOR new_cpu_data+CPUINFO_x86_vendor
#define X86_MODEL new_cpu_data+CPUINFO_x86_model
-#define X86_MASK new_cpu_data+CPUINFO_x86_mask
+#define X86_STEPPING new_cpu_data+CPUINFO_x86_stepping
#define X86_HARD_MATH new_cpu_data+CPUINFO_hard_math
#define X86_CPUID new_cpu_data+CPUINFO_cpuid_level
#define X86_CAPABILITY new_cpu_data+CPUINFO_x86_capability
@@ -332,7 +332,7 @@ ENTRY(startup_32_smp)
shrb $4,%al
movb %al,X86_MODEL
andb $0x0f,%cl # mask mask revision
- movb %cl,X86_MASK
+ movb %cl,X86_STEPPING
movl %edx,X86_CAPABILITY
.Lis486:
--- a/arch/x86/kernel/mpparse.c
+++ b/arch/x86/kernel/mpparse.c
@@ -407,7 +407,7 @@ static inline void __init construct_defa
processor.apicver = mpc_default_type > 4 ? 0x10 : 0x01;
processor.cpuflag = CPU_ENABLED;
processor.cpufeature = (boot_cpu_data.x86 << 8) |
- (boot_cpu_data.x86_model << 4) | boot_cpu_data.x86_mask;
+ (boot_cpu_data.x86_model << 4) | boot_cpu_data.x86_stepping;
processor.featureflag = boot_cpu_data.x86_capability[CPUID_1_EDX];
processor.reserved[0] = 0;
processor.reserved[1] = 0;
--- a/arch/x86/lib/cpu.c
+++ b/arch/x86/lib/cpu.c
@@ -18,7 +18,7 @@ unsigned int x86_model(unsigned int sig)
{
unsigned int fam, model;
- fam = x86_family(sig);
+ fam = x86_family(sig);
model = (sig >> 4) & 0xf;
--- a/drivers/char/hw_random/via-rng.c
+++ b/drivers/char/hw_random/via-rng.c
@@ -162,7 +162,7 @@ static int via_rng_init(struct hwrng *rn
/* Enable secondary noise source on CPUs where it is present. */
/* Nehemiah stepping 8 and higher */
- if ((c->x86_model == 9) && (c->x86_mask > 7))
+ if ((c->x86_model == 9) && (c->x86_stepping > 7))
lo |= VIA_NOISESRC2;
/* Esther */
--- a/drivers/cpufreq/acpi-cpufreq.c
+++ b/drivers/cpufreq/acpi-cpufreq.c
@@ -629,7 +629,7 @@ static int acpi_cpufreq_blacklist(struct
if (c->x86_vendor == X86_VENDOR_INTEL) {
if ((c->x86 == 15) &&
(c->x86_model == 6) &&
- (c->x86_mask == 8)) {
+ (c->x86_stepping == 8)) {
pr_info("Intel(R) Xeon(R) 7100 Errata AL30, processors may lock up on frequency changes: disabling acpi-cpufreq\n");
return -ENODEV;
}
--- a/drivers/cpufreq/longhaul.c
+++ b/drivers/cpufreq/longhaul.c
@@ -775,7 +775,7 @@ static int longhaul_cpu_init(struct cpuf
break;
case 7:
- switch (c->x86_mask) {
+ switch (c->x86_stepping) {
case 0:
longhaul_version = TYPE_LONGHAUL_V1;
cpu_model = CPU_SAMUEL2;
@@ -787,7 +787,7 @@ static int longhaul_cpu_init(struct cpuf
break;
case 1 ... 15:
longhaul_version = TYPE_LONGHAUL_V2;
- if (c->x86_mask < 8) {
+ if (c->x86_stepping < 8) {
cpu_model = CPU_SAMUEL2;
cpuname = "C3 'Samuel 2' [C5B]";
} else {
@@ -814,7 +814,7 @@ static int longhaul_cpu_init(struct cpuf
numscales = 32;
memcpy(mults, nehemiah_mults, sizeof(nehemiah_mults));
memcpy(eblcr, nehemiah_eblcr, sizeof(nehemiah_eblcr));
- switch (c->x86_mask) {
+ switch (c->x86_stepping) {
case 0 ... 1:
cpu_model = CPU_NEHEMIAH;
cpuname = "C3 'Nehemiah A' [C5XLOE]";
--- a/drivers/cpufreq/p4-clockmod.c
+++ b/drivers/cpufreq/p4-clockmod.c
@@ -168,7 +168,7 @@ static int cpufreq_p4_cpu_init(struct cp
#endif
/* Errata workaround */
- cpuid = (c->x86 << 8) | (c->x86_model << 4) | c->x86_mask;
+ cpuid = (c->x86 << 8) | (c->x86_model << 4) | c->x86_stepping;
switch (cpuid) {
case 0x0f07:
case 0x0f0a:
--- a/drivers/cpufreq/powernow-k7.c
+++ b/drivers/cpufreq/powernow-k7.c
@@ -131,7 +131,7 @@ static int check_powernow(void)
return 0;
}
- if ((c->x86_model == 6) && (c->x86_mask == 0)) {
+ if ((c->x86_model == 6) && (c->x86_stepping == 0)) {
pr_info("K7 660[A0] core detected, enabling errata workarounds\n");
have_a0 = 1;
}
--- a/drivers/cpufreq/speedstep-centrino.c
+++ b/drivers/cpufreq/speedstep-centrino.c
@@ -37,7 +37,7 @@ struct cpu_id
{
__u8 x86; /* CPU family */
__u8 x86_model; /* model */
- __u8 x86_mask; /* stepping */
+ __u8 x86_stepping; /* stepping */
};
enum {
@@ -277,7 +277,7 @@ static int centrino_verify_cpu_id(const
{
if ((c->x86 == x->x86) &&
(c->x86_model == x->x86_model) &&
- (c->x86_mask == x->x86_mask))
+ (c->x86_stepping == x->x86_stepping))
return 1;
return 0;
}
--- a/drivers/cpufreq/speedstep-lib.c
+++ b/drivers/cpufreq/speedstep-lib.c
@@ -272,9 +272,9 @@ unsigned int speedstep_detect_processor(
ebx = cpuid_ebx(0x00000001);
ebx &= 0x000000FF;
- pr_debug("ebx value is %x, x86_mask is %x\n", ebx, c->x86_mask);
+ pr_debug("ebx value is %x, x86_stepping is %x\n", ebx, c->x86_stepping);
- switch (c->x86_mask) {
+ switch (c->x86_stepping) {
case 4:
/*
* B-stepping [M-P4-M]
@@ -361,7 +361,7 @@ unsigned int speedstep_detect_processor(
msr_lo, msr_hi);
if ((msr_hi & (1<<18)) &&
(relaxed_check ? 1 : (msr_hi & (3<<24)))) {
- if (c->x86_mask == 0x01) {
+ if (c->x86_stepping == 0x01) {
pr_debug("early PIII version\n");
return SPEEDSTEP_CPU_PIII_C_EARLY;
} else
--- a/drivers/crypto/padlock-aes.c
+++ b/drivers/crypto/padlock-aes.c
@@ -512,7 +512,7 @@ static int __init padlock_init(void)
printk(KERN_NOTICE PFX "Using VIA PadLock ACE for AES algorithm.\n");
- if (c->x86 == 6 && c->x86_model == 15 && c->x86_mask == 2) {
+ if (c->x86 == 6 && c->x86_model == 15 && c->x86_stepping == 2) {
ecb_fetch_blocks = MAX_ECB_FETCH_BLOCKS;
cbc_fetch_blocks = MAX_CBC_FETCH_BLOCKS;
printk(KERN_NOTICE PFX "VIA Nano stepping 2 detected: enabling workaround.\n");
--- a/drivers/edac/amd64_edac.c
+++ b/drivers/edac/amd64_edac.c
@@ -3147,7 +3147,7 @@ static struct amd64_family_type *per_fam
struct amd64_family_type *fam_type = NULL;
pvt->ext_model = boot_cpu_data.x86_model >> 4;
- pvt->stepping = boot_cpu_data.x86_mask;
+ pvt->stepping = boot_cpu_data.x86_stepping;
pvt->model = boot_cpu_data.x86_model;
pvt->fam = boot_cpu_data.x86;
--- a/drivers/hwmon/coretemp.c
+++ b/drivers/hwmon/coretemp.c
@@ -268,13 +268,13 @@ static int adjust_tjmax(struct cpuinfo_x
for (i = 0; i < ARRAY_SIZE(tjmax_model_table); i++) {
const struct tjmax_model *tm = &tjmax_model_table[i];
if (c->x86_model == tm->model &&
- (tm->mask == ANY || c->x86_mask == tm->mask))
+ (tm->mask == ANY || c->x86_stepping == tm->mask))
return tm->tjmax;
}
/* Early chips have no MSR for TjMax */
- if (c->x86_model == 0xf && c->x86_mask < 4)
+ if (c->x86_model == 0xf && c->x86_stepping < 4)
usemsr_ee = 0;
if (c->x86_model > 0xe && usemsr_ee) {
@@ -425,7 +425,7 @@ static int chk_ucode_version(unsigned in
* Readings might stop update when processor visited too deep sleep,
* fixed for stepping D0 (6EC).
*/
- if (c->x86_model == 0xe && c->x86_mask < 0xc && c->microcode < 0x39) {
+ if (c->x86_model == 0xe && c->x86_stepping < 0xc && c->microcode < 0x39) {
pr_err("Errata AE18 not fixed, update BIOS or microcode of the CPU!\n");
return -ENODEV;
}
--- a/drivers/hwmon/hwmon-vid.c
+++ b/drivers/hwmon/hwmon-vid.c
@@ -293,7 +293,7 @@ u8 vid_which_vrm(void)
if (c->x86 < 6) /* Any CPU with family lower than 6 */
return 0; /* doesn't have VID */
- vrm_ret = find_vrm(c->x86, c->x86_model, c->x86_mask, c->x86_vendor);
+ vrm_ret = find_vrm(c->x86, c->x86_model, c->x86_stepping, c->x86_vendor);
if (vrm_ret == 134)
vrm_ret = get_via_model_d_vrm();
if (vrm_ret == 0)
--- a/drivers/hwmon/k10temp.c
+++ b/drivers/hwmon/k10temp.c
@@ -179,7 +179,7 @@ static bool has_erratum_319(struct pci_d
* and AM3 formats, but that's the best we can do.
*/
return boot_cpu_data.x86_model < 4 ||
- (boot_cpu_data.x86_model == 4 && boot_cpu_data.x86_mask <= 2);
+ (boot_cpu_data.x86_model == 4 && boot_cpu_data.x86_stepping <= 2);
}
static int k10temp_probe(struct pci_dev *pdev,
--- a/drivers/hwmon/k8temp.c
+++ b/drivers/hwmon/k8temp.c
@@ -187,7 +187,7 @@ static int k8temp_probe(struct pci_dev *
return -ENOMEM;
model = boot_cpu_data.x86_model;
- stepping = boot_cpu_data.x86_mask;
+ stepping = boot_cpu_data.x86_stepping;
/* feature available since SH-C0, exclude older revisions */
if ((model == 4 && stepping == 0) ||
--- a/drivers/video/fbdev/geode/video_gx.c
+++ b/drivers/video/fbdev/geode/video_gx.c
@@ -127,7 +127,7 @@ void gx_set_dclk_frequency(struct fb_inf
int timeout = 1000;
/* Rev. 1 Geode GXs use a 14 MHz reference clock instead of 48 MHz. */
- if (cpu_data(0).x86_mask == 1) {
+ if (cpu_data(0).x86_stepping == 1) {
pll_table = gx_pll_table_14MHz;
pll_table_len = ARRAY_SIZE(gx_pll_table_14MHz);
} else {
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Michal Hocko <[email protected]>
commit f335195adf043168ee69d78ea72ac3e30f0c57ce upstream.
Commit 4675ff05de2d ("kmemcheck: rip it out") has removed the code but
for some reason SPDX header stayed in place. This looks like a rebase
mistake in the mmotm tree or the merge mistake. Let's drop those
leftovers as well.
Signed-off-by: Michal Hocko <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/include/asm/kmemcheck.h | 1 -
arch/x86/mm/kmemcheck/error.c | 1 -
arch/x86/mm/kmemcheck/error.h | 1 -
arch/x86/mm/kmemcheck/opcode.c | 1 -
arch/x86/mm/kmemcheck/opcode.h | 1 -
arch/x86/mm/kmemcheck/pte.c | 1 -
arch/x86/mm/kmemcheck/pte.h | 1 -
arch/x86/mm/kmemcheck/selftest.c | 1 -
arch/x86/mm/kmemcheck/selftest.h | 1 -
arch/x86/mm/kmemcheck/shadow.h | 1 -
include/linux/kmemcheck.h | 1 -
mm/kmemcheck.c | 1 -
tools/include/linux/kmemcheck.h | 1 -
13 files changed, 13 deletions(-)
--- a/arch/x86/include/asm/kmemcheck.h
+++ /dev/null
@@ -1 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
--- a/arch/x86/mm/kmemcheck/error.c
+++ /dev/null
@@ -1 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
--- a/arch/x86/mm/kmemcheck/error.h
+++ /dev/null
@@ -1 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
--- a/arch/x86/mm/kmemcheck/opcode.c
+++ /dev/null
@@ -1 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
--- a/arch/x86/mm/kmemcheck/opcode.h
+++ /dev/null
@@ -1 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
--- a/arch/x86/mm/kmemcheck/pte.c
+++ /dev/null
@@ -1 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
--- a/arch/x86/mm/kmemcheck/pte.h
+++ /dev/null
@@ -1 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
--- a/arch/x86/mm/kmemcheck/selftest.c
+++ /dev/null
@@ -1 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
--- a/arch/x86/mm/kmemcheck/selftest.h
+++ /dev/null
@@ -1 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
--- a/arch/x86/mm/kmemcheck/shadow.h
+++ /dev/null
@@ -1 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
--- a/include/linux/kmemcheck.h
+++ /dev/null
@@ -1 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
--- a/mm/kmemcheck.c
+++ /dev/null
@@ -1 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
--- a/tools/include/linux/kmemcheck.h
+++ /dev/null
@@ -1 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Peter Zijlstra <[email protected]>
commit ea00f301285ea2f07393678cd2b6057878320c9d upstream.
Joe Konno reported a compile failure resulting from using an MSR
without inclusion of <asm/msr-index.h>, and while the current code builds
fine (by accident) this needs fixing for future patches.
Reported-by: Joe Konno <[email protected]>
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Fixes: 20ffa1caecca ("x86/speculation: Add basic IBPB (Indirect Branch Prediction Barrier) support")
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Ingo Molnar <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/include/asm/nospec-branch.h | 1 +
1 file changed, 1 insertion(+)
--- a/arch/x86/include/asm/nospec-branch.h
+++ b/arch/x86/include/asm/nospec-branch.h
@@ -6,6 +6,7 @@
#include <asm/alternative.h>
#include <asm/alternative-asm.h>
#include <asm/cpufeatures.h>
+#include <asm/msr-index.h>
#ifdef __ASSEMBLY__
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Andy Lutomirski <[email protected]>
commit 1299ef1d8870d2d9f09a5aadf2f8b2c887c2d033 upstream.
flush_tlb_single() and flush_tlb_one() sound almost identical, but
they really mean "flush one user translation" and "flush one kernel
translation". Rename them to flush_tlb_one_user() and
flush_tlb_one_kernel() to make the semantics more obvious.
[ I was looking at some PTI-related code, and the flush-one-address code
is unnecessarily hard to understand because the names of the helpers are
uninformative. This came up during PTI review, but no one got around to
doing it. ]
Signed-off-by: Andy Lutomirski <[email protected]>
Acked-by: Peter Zijlstra (Intel) <[email protected]>
Cc: Boris Ostrovsky <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: Brian Gerst <[email protected]>
Cc: Dave Hansen <[email protected]>
Cc: Eduardo Valentin <[email protected]>
Cc: Hugh Dickins <[email protected]>
Cc: Josh Poimboeuf <[email protected]>
Cc: Juergen Gross <[email protected]>
Cc: Kees Cook <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Linux-MM <[email protected]>
Cc: Rik van Riel <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Will Deacon <[email protected]>
Link: http://lkml.kernel.org/r/3303b02e3c3d049dc5235d5651e0ae6d29a34354.1517414378.git.luto@kernel.org
Signed-off-by: Ingo Molnar <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/include/asm/paravirt.h | 4 ++--
arch/x86/include/asm/paravirt_types.h | 2 +-
arch/x86/include/asm/pgtable_32.h | 2 +-
arch/x86/include/asm/tlbflush.h | 27 ++++++++++++++++++++-------
arch/x86/kernel/acpi/apei.c | 2 +-
arch/x86/kernel/paravirt.c | 6 +++---
arch/x86/mm/init_64.c | 2 +-
arch/x86/mm/ioremap.c | 2 +-
arch/x86/mm/kmmio.c | 2 +-
arch/x86/mm/pgtable_32.c | 2 +-
arch/x86/mm/tlb.c | 6 +++---
arch/x86/platform/uv/tlb_uv.c | 2 +-
arch/x86/xen/mmu_pv.c | 6 +++---
include/trace/events/xen.h | 2 +-
14 files changed, 40 insertions(+), 27 deletions(-)
--- a/arch/x86/include/asm/paravirt.h
+++ b/arch/x86/include/asm/paravirt.h
@@ -297,9 +297,9 @@ static inline void __flush_tlb_global(vo
{
PVOP_VCALL0(pv_mmu_ops.flush_tlb_kernel);
}
-static inline void __flush_tlb_single(unsigned long addr)
+static inline void __flush_tlb_one_user(unsigned long addr)
{
- PVOP_VCALL1(pv_mmu_ops.flush_tlb_single, addr);
+ PVOP_VCALL1(pv_mmu_ops.flush_tlb_one_user, addr);
}
static inline void flush_tlb_others(const struct cpumask *cpumask,
--- a/arch/x86/include/asm/paravirt_types.h
+++ b/arch/x86/include/asm/paravirt_types.h
@@ -217,7 +217,7 @@ struct pv_mmu_ops {
/* TLB operations */
void (*flush_tlb_user)(void);
void (*flush_tlb_kernel)(void);
- void (*flush_tlb_single)(unsigned long addr);
+ void (*flush_tlb_one_user)(unsigned long addr);
void (*flush_tlb_others)(const struct cpumask *cpus,
const struct flush_tlb_info *info);
--- a/arch/x86/include/asm/pgtable_32.h
+++ b/arch/x86/include/asm/pgtable_32.h
@@ -61,7 +61,7 @@ void paging_init(void);
#define kpte_clear_flush(ptep, vaddr) \
do { \
pte_clear(&init_mm, (vaddr), (ptep)); \
- __flush_tlb_one((vaddr)); \
+ __flush_tlb_one_kernel((vaddr)); \
} while (0)
#endif /* !__ASSEMBLY__ */
--- a/arch/x86/include/asm/tlbflush.h
+++ b/arch/x86/include/asm/tlbflush.h
@@ -140,7 +140,7 @@ static inline unsigned long build_cr3_no
#else
#define __flush_tlb() __native_flush_tlb()
#define __flush_tlb_global() __native_flush_tlb_global()
-#define __flush_tlb_single(addr) __native_flush_tlb_single(addr)
+#define __flush_tlb_one_user(addr) __native_flush_tlb_one_user(addr)
#endif
static inline bool tlb_defer_switch_to_init_mm(void)
@@ -397,7 +397,7 @@ static inline void __native_flush_tlb_gl
/*
* flush one page in the user mapping
*/
-static inline void __native_flush_tlb_single(unsigned long addr)
+static inline void __native_flush_tlb_one_user(unsigned long addr)
{
u32 loaded_mm_asid = this_cpu_read(cpu_tlbstate.loaded_mm_asid);
@@ -434,18 +434,31 @@ static inline void __flush_tlb_all(void)
/*
* flush one page in the kernel mapping
*/
-static inline void __flush_tlb_one(unsigned long addr)
+static inline void __flush_tlb_one_kernel(unsigned long addr)
{
count_vm_tlb_event(NR_TLB_LOCAL_FLUSH_ONE);
- __flush_tlb_single(addr);
+
+ /*
+ * If PTI is off, then __flush_tlb_one_user() is just INVLPG or its
+ * paravirt equivalent. Even with PCID, this is sufficient: we only
+ * use PCID if we also use global PTEs for the kernel mapping, and
+ * INVLPG flushes global translations across all address spaces.
+ *
+ * If PTI is on, then the kernel is mapped with non-global PTEs, and
+ * __flush_tlb_one_user() will flush the given address for the current
+ * kernel address space and for its usermode counterpart, but it does
+ * not flush it for other address spaces.
+ */
+ __flush_tlb_one_user(addr);
if (!static_cpu_has(X86_FEATURE_PTI))
return;
/*
- * __flush_tlb_single() will have cleared the TLB entry for this ASID,
- * but since kernel space is replicated across all, we must also
- * invalidate all others.
+ * See above. We need to propagate the flush to all other address
+ * spaces. In principle, we only need to propagate it to kernelmode
+ * address spaces, but the extra bookkeeping we would need is not
+ * worth it.
*/
invalidate_other_asid();
}
--- a/arch/x86/kernel/acpi/apei.c
+++ b/arch/x86/kernel/acpi/apei.c
@@ -55,5 +55,5 @@ void arch_apei_report_mem_error(int sev,
void arch_apei_flush_tlb_one(unsigned long addr)
{
- __flush_tlb_one(addr);
+ __flush_tlb_one_kernel(addr);
}
--- a/arch/x86/kernel/paravirt.c
+++ b/arch/x86/kernel/paravirt.c
@@ -190,9 +190,9 @@ static void native_flush_tlb_global(void
__native_flush_tlb_global();
}
-static void native_flush_tlb_single(unsigned long addr)
+static void native_flush_tlb_one_user(unsigned long addr)
{
- __native_flush_tlb_single(addr);
+ __native_flush_tlb_one_user(addr);
}
struct static_key paravirt_steal_enabled;
@@ -391,7 +391,7 @@ struct pv_mmu_ops pv_mmu_ops __ro_after_
.flush_tlb_user = native_flush_tlb,
.flush_tlb_kernel = native_flush_tlb_global,
- .flush_tlb_single = native_flush_tlb_single,
+ .flush_tlb_one_user = native_flush_tlb_one_user,
.flush_tlb_others = native_flush_tlb_others,
.pgd_alloc = __paravirt_pgd_alloc,
--- a/arch/x86/mm/init_64.c
+++ b/arch/x86/mm/init_64.c
@@ -256,7 +256,7 @@ static void __set_pte_vaddr(pud_t *pud,
* It's enough to flush this one mapping.
* (PGE mappings get flushed as well)
*/
- __flush_tlb_one(vaddr);
+ __flush_tlb_one_kernel(vaddr);
}
void set_pte_vaddr_p4d(p4d_t *p4d_page, unsigned long vaddr, pte_t new_pte)
--- a/arch/x86/mm/ioremap.c
+++ b/arch/x86/mm/ioremap.c
@@ -749,5 +749,5 @@ void __init __early_set_fixmap(enum fixe
set_pte(pte, pfn_pte(phys >> PAGE_SHIFT, flags));
else
pte_clear(&init_mm, addr, pte);
- __flush_tlb_one(addr);
+ __flush_tlb_one_kernel(addr);
}
--- a/arch/x86/mm/kmmio.c
+++ b/arch/x86/mm/kmmio.c
@@ -168,7 +168,7 @@ static int clear_page_presence(struct km
return -1;
}
- __flush_tlb_one(f->addr);
+ __flush_tlb_one_kernel(f->addr);
return 0;
}
--- a/arch/x86/mm/pgtable_32.c
+++ b/arch/x86/mm/pgtable_32.c
@@ -63,7 +63,7 @@ void set_pte_vaddr(unsigned long vaddr,
* It's enough to flush this one mapping.
* (PGE mappings get flushed as well)
*/
- __flush_tlb_one(vaddr);
+ __flush_tlb_one_kernel(vaddr);
}
unsigned long __FIXADDR_TOP = 0xfffff000;
--- a/arch/x86/mm/tlb.c
+++ b/arch/x86/mm/tlb.c
@@ -492,7 +492,7 @@ static void flush_tlb_func_common(const
* flush that changes context.tlb_gen from 2 to 3. If they get
* processed on this CPU in reverse order, we'll see
* local_tlb_gen == 1, mm_tlb_gen == 3, and end != TLB_FLUSH_ALL.
- * If we were to use __flush_tlb_single() and set local_tlb_gen to
+ * If we were to use __flush_tlb_one_user() and set local_tlb_gen to
* 3, we'd be break the invariant: we'd update local_tlb_gen above
* 1 without the full flush that's needed for tlb_gen 2.
*
@@ -513,7 +513,7 @@ static void flush_tlb_func_common(const
addr = f->start;
while (addr < f->end) {
- __flush_tlb_single(addr);
+ __flush_tlb_one_user(addr);
addr += PAGE_SIZE;
}
if (local)
@@ -660,7 +660,7 @@ static void do_kernel_range_flush(void *
/* flush range by one by one 'invlpg' */
for (addr = f->start; addr < f->end; addr += PAGE_SIZE)
- __flush_tlb_one(addr);
+ __flush_tlb_one_kernel(addr);
}
void flush_tlb_kernel_range(unsigned long start, unsigned long end)
--- a/arch/x86/platform/uv/tlb_uv.c
+++ b/arch/x86/platform/uv/tlb_uv.c
@@ -299,7 +299,7 @@ static void bau_process_message(struct m
local_flush_tlb();
stat->d_alltlb++;
} else {
- __flush_tlb_single(msg->address);
+ __flush_tlb_one_user(msg->address);
stat->d_onetlb++;
}
stat->d_requestee++;
--- a/arch/x86/xen/mmu_pv.c
+++ b/arch/x86/xen/mmu_pv.c
@@ -1300,12 +1300,12 @@ static void xen_flush_tlb(void)
preempt_enable();
}
-static void xen_flush_tlb_single(unsigned long addr)
+static void xen_flush_tlb_one_user(unsigned long addr)
{
struct mmuext_op *op;
struct multicall_space mcs;
- trace_xen_mmu_flush_tlb_single(addr);
+ trace_xen_mmu_flush_tlb_one_user(addr);
preempt_disable();
@@ -2360,7 +2360,7 @@ static const struct pv_mmu_ops xen_mmu_o
.flush_tlb_user = xen_flush_tlb,
.flush_tlb_kernel = xen_flush_tlb,
- .flush_tlb_single = xen_flush_tlb_single,
+ .flush_tlb_one_user = xen_flush_tlb_one_user,
.flush_tlb_others = xen_flush_tlb_others,
.pgd_alloc = xen_pgd_alloc,
--- a/include/trace/events/xen.h
+++ b/include/trace/events/xen.h
@@ -365,7 +365,7 @@ TRACE_EVENT(xen_mmu_flush_tlb,
TP_printk("%s", "")
);
-TRACE_EVENT(xen_mmu_flush_tlb_single,
+TRACE_EVENT(xen_mmu_flush_tlb_one_user,
TP_PROTO(unsigned long addr),
TP_ARGS(addr),
TP_STRUCT__entry(
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Josh Poimboeuf <[email protected]>
commit fe24e27128252c230a34a6c628da2bf1676781ea upstream.
Peter Zijlstra's patch for converting WARN() to use UD2 triggered a
bunch of false "unreachable instruction" warnings, which then triggered
a seg fault in ignore_unreachable_insn().
The seg fault happened when it tried to dereference a NULL 'insn->func'
pointer. Thanks to static_cpu_has(), some functions can jump to a
non-function area in the .altinstr_aux section. That breaks
ignore_unreachable_insn()'s assumption that it's always inside the
original function.
Make sure ignore_unreachable_insn() only follows jumps within the
current function.
Reported-by: Borislav Petkov <[email protected]>
Signed-off-by: Josh Poimboeuf <[email protected]>
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Cc: Andy Lutomirski <[email protected]>
Cc: Arjan van de Ven <[email protected]>
Cc: Brian Gerst <[email protected]>
Cc: Denys Vlasenko <[email protected]>
Cc: H. Peter Anvin <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: kbuild test robot <[email protected]>
Link: http://lkml.kernel.org/r/bace77a60d5af9b45eddb8f8fb9c776c8de657ef.1518130694.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
tools/objtool/check.c | 12 +++++++++---
1 file changed, 9 insertions(+), 3 deletions(-)
--- a/tools/objtool/check.c
+++ b/tools/objtool/check.c
@@ -1935,13 +1935,19 @@ static bool ignore_unreachable_insn(stru
if (is_kasan_insn(insn) || is_ubsan_insn(insn))
return true;
- if (insn->type == INSN_JUMP_UNCONDITIONAL && insn->jump_dest) {
- insn = insn->jump_dest;
- continue;
+ if (insn->type == INSN_JUMP_UNCONDITIONAL) {
+ if (insn->jump_dest &&
+ insn->jump_dest->func == insn->func) {
+ insn = insn->jump_dest;
+ continue;
+ }
+
+ break;
}
if (insn->offset + insn->len >= insn->func->offset + insn->func->len)
break;
+
insn = list_next_entry(insn, list);
}
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Anuj Phogat <[email protected]>
commit 41693fd5237397d3c61b311af0fda1f6f39297c2 upstream.
See Mesa commit 9c588ff
Cc: Matt Turner <[email protected]>
Cc: Rodrigo Vivi <[email protected]>
Signed-off-by: Anuj Phogat <[email protected]>
Reviewed-by: Rodrigo Vivi <[email protected]>
Signed-off-by: Rodrigo Vivi <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
include/drm/i915_pciids.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/include/drm/i915_pciids.h
+++ b/include/drm/i915_pciids.h
@@ -339,7 +339,6 @@
#define INTEL_KBL_GT1_IDS(info) \
INTEL_VGA_DEVICE(0x5913, info), /* ULT GT1.5 */ \
INTEL_VGA_DEVICE(0x5915, info), /* ULX GT1.5 */ \
- INTEL_VGA_DEVICE(0x5917, info), /* DT GT1.5 */ \
INTEL_VGA_DEVICE(0x5906, info), /* ULT GT1 */ \
INTEL_VGA_DEVICE(0x590E, info), /* ULX GT1 */ \
INTEL_VGA_DEVICE(0x5902, info), /* DT GT1 */ \
@@ -349,6 +348,7 @@
#define INTEL_KBL_GT2_IDS(info) \
INTEL_VGA_DEVICE(0x5916, info), /* ULT GT2 */ \
+ INTEL_VGA_DEVICE(0x5917, info), /* Mobile GT2 */ \
INTEL_VGA_DEVICE(0x5921, info), /* ULT GT2F */ \
INTEL_VGA_DEVICE(0x591E, info), /* ULX GT2 */ \
INTEL_VGA_DEVICE(0x5912, info), /* DT GT2 */ \
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Kirill A. Shutemov <[email protected]>
commit 5bf30316991d5bcda046343ee77d823cf16fdd03 upstream.
Currently kexec() will crash when switching into a 5-level paging
enabled kernel.
I missed that we need to change relocate_kernel() to set CR4.LA57
flag if the kernel has 5-level paging enabled.
I avoided using #ifdef CONFIG_X86_5LEVEL here and inferred if we need to
enable 5-level paging from previous CR4 value. This way the code is
ready for boot-time switching between paging modes.
With this patch applied, in addition to kexec 4-to-4 which always worked,
we can kexec 4-to-5 and 5-to-5 - while 5-to-4 will need more work.
Reported-by: Baoquan He <[email protected]>
Signed-off-by: Kirill A. Shutemov <[email protected]>
Tested-by: Baoquan He <[email protected]>
Cc: <[email protected]> # v4.14+
Cc: Borislav Petkov <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: [email protected]
Fixes: 77ef56e4f0fb ("x86: Enable 5-level paging support via CONFIG_X86_5LEVEL=y")
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Ingo Molnar <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/kernel/relocate_kernel_64.S | 8 ++++++++
1 file changed, 8 insertions(+)
--- a/arch/x86/kernel/relocate_kernel_64.S
+++ b/arch/x86/kernel/relocate_kernel_64.S
@@ -68,6 +68,9 @@ relocate_kernel:
movq %cr4, %rax
movq %rax, CR4(%r11)
+ /* Save CR4. Required to enable the right paging mode later. */
+ movq %rax, %r13
+
/* zero out flags, and disable interrupts */
pushq $0
popfq
@@ -126,8 +129,13 @@ identity_mapped:
/*
* Set cr4 to a known state:
* - physical address extension enabled
+ * - 5-level paging, if it was enabled before
*/
movl $X86_CR4_PAE, %eax
+ testq $X86_CR4_LA57, %r13
+ jz 1f
+ orl $X86_CR4_LA57, %eax
+1:
movq %rax, %cr4
jmp 1f
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Dominik Brodowski <[email protected]>
commit 198ee8e17502da2634f7366395db1d77630e0219 upstream.
The vDSO selftest tries to execute a vsyscall unconditionally, even if it
is not present on the test system (e.g. if booted with vsyscall=none or
with CONFIG_LEGACY_VSYSCALL_NONE=y set. Fix this by copying (and tweaking)
the vsyscall check from test_vsyscall.c
Signed-off-by: Dominik Brodowski <[email protected]>
Cc: Andrew Lutomirski <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: [email protected]
Cc: [email protected]
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Ingo Molnar <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
tools/testing/selftests/x86/test_vdso.c | 50 +++++++++++++++++++++++++++-----
1 file changed, 43 insertions(+), 7 deletions(-)
--- a/tools/testing/selftests/x86/test_vdso.c
+++ b/tools/testing/selftests/x86/test_vdso.c
@@ -28,18 +28,52 @@
int nerrs = 0;
+typedef long (*getcpu_t)(unsigned *, unsigned *, void *);
+
+getcpu_t vgetcpu;
+getcpu_t vdso_getcpu;
+
+static void *vsyscall_getcpu(void)
+{
#ifdef __x86_64__
-# define VSYS(x) (x)
+ FILE *maps;
+ char line[128];
+ bool found = false;
+
+ maps = fopen("/proc/self/maps", "r");
+ if (!maps) /* might still be present, but ignore it here, as we test vDSO not vsyscall */
+ return NULL;
+
+ while (fgets(line, sizeof(line), maps)) {
+ char r, x;
+ void *start, *end;
+ char name[128];
+ if (sscanf(line, "%p-%p %c-%cp %*x %*x:%*x %*u %s",
+ &start, &end, &r, &x, name) != 5)
+ continue;
+
+ if (strcmp(name, "[vsyscall]"))
+ continue;
+
+ /* assume entries are OK, as we test vDSO here not vsyscall */
+ found = true;
+ break;
+ }
+
+ fclose(maps);
+
+ if (!found) {
+ printf("Warning: failed to find vsyscall getcpu\n");
+ return NULL;
+ }
+ return (void *) (0xffffffffff600800);
#else
-# define VSYS(x) 0
+ return NULL;
#endif
+}
-typedef long (*getcpu_t)(unsigned *, unsigned *, void *);
-
-const getcpu_t vgetcpu = (getcpu_t)VSYS(0xffffffffff600800);
-getcpu_t vdso_getcpu;
-void fill_function_pointers()
+static void fill_function_pointers()
{
void *vdso = dlopen("linux-vdso.so.1",
RTLD_LAZY | RTLD_LOCAL | RTLD_NOLOAD);
@@ -54,6 +88,8 @@ void fill_function_pointers()
vdso_getcpu = (getcpu_t)dlsym(vdso, "__vdso_getcpu");
if (!vdso_getcpu)
printf("Warning: failed to find getcpu in vDSO\n");
+
+ vgetcpu = (getcpu_t) vsyscall_getcpu();
}
static long sys_getcpu(unsigned * cpu, unsigned * node,
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Dan Williams <[email protected]>
commit 6b8cf5cc9965673951f1ab3f0e3cf23d06e3e2ee upstream.
At entry userspace may have populated registers with values that could
otherwise be useful in a speculative execution attack. Clear them to
minimize the kernel's attack surface.
Originally-From: Andi Kleen <[email protected]>
Signed-off-by: Dan Williams <[email protected]>
Cc: <[email protected]>
Cc: Andy Lutomirski <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: Brian Gerst <[email protected]>
Cc: Denys Vlasenko <[email protected]>
Cc: H. Peter Anvin <[email protected]>
Cc: Josh Poimboeuf <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Link: http://lkml.kernel.org/r/151787989697.7847.4083702787288600552.stgit@dwillia2-desk3.amr.corp.intel.com
[ Made small improvements to the changelog. ]
Signed-off-by: Ingo Molnar <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/entry/entry_64_compat.S | 30 ++++++++++++++++++++++++++++++
1 file changed, 30 insertions(+)
--- a/arch/x86/entry/entry_64_compat.S
+++ b/arch/x86/entry/entry_64_compat.S
@@ -85,15 +85,25 @@ ENTRY(entry_SYSENTER_compat)
pushq %rcx /* pt_regs->cx */
pushq $-ENOSYS /* pt_regs->ax */
pushq $0 /* pt_regs->r8 = 0 */
+ xorq %r8, %r8 /* nospec r8 */
pushq $0 /* pt_regs->r9 = 0 */
+ xorq %r9, %r9 /* nospec r9 */
pushq $0 /* pt_regs->r10 = 0 */
+ xorq %r10, %r10 /* nospec r10 */
pushq $0 /* pt_regs->r11 = 0 */
+ xorq %r11, %r11 /* nospec r11 */
pushq %rbx /* pt_regs->rbx */
+ xorl %ebx, %ebx /* nospec rbx */
pushq %rbp /* pt_regs->rbp (will be overwritten) */
+ xorl %ebp, %ebp /* nospec rbp */
pushq $0 /* pt_regs->r12 = 0 */
+ xorq %r12, %r12 /* nospec r12 */
pushq $0 /* pt_regs->r13 = 0 */
+ xorq %r13, %r13 /* nospec r13 */
pushq $0 /* pt_regs->r14 = 0 */
+ xorq %r14, %r14 /* nospec r14 */
pushq $0 /* pt_regs->r15 = 0 */
+ xorq %r15, %r15 /* nospec r15 */
cld
/*
@@ -214,15 +224,25 @@ GLOBAL(entry_SYSCALL_compat_after_hwfram
pushq %rbp /* pt_regs->cx (stashed in bp) */
pushq $-ENOSYS /* pt_regs->ax */
pushq $0 /* pt_regs->r8 = 0 */
+ xorq %r8, %r8 /* nospec r8 */
pushq $0 /* pt_regs->r9 = 0 */
+ xorq %r9, %r9 /* nospec r9 */
pushq $0 /* pt_regs->r10 = 0 */
+ xorq %r10, %r10 /* nospec r10 */
pushq $0 /* pt_regs->r11 = 0 */
+ xorq %r11, %r11 /* nospec r11 */
pushq %rbx /* pt_regs->rbx */
+ xorl %ebx, %ebx /* nospec rbx */
pushq %rbp /* pt_regs->rbp (will be overwritten) */
+ xorl %ebp, %ebp /* nospec rbp */
pushq $0 /* pt_regs->r12 = 0 */
+ xorq %r12, %r12 /* nospec r12 */
pushq $0 /* pt_regs->r13 = 0 */
+ xorq %r13, %r13 /* nospec r13 */
pushq $0 /* pt_regs->r14 = 0 */
+ xorq %r14, %r14 /* nospec r14 */
pushq $0 /* pt_regs->r15 = 0 */
+ xorq %r15, %r15 /* nospec r15 */
/*
* User mode is traced as though IRQs are on, and SYSENTER
@@ -338,15 +358,25 @@ ENTRY(entry_INT80_compat)
pushq %rcx /* pt_regs->cx */
pushq $-ENOSYS /* pt_regs->ax */
pushq $0 /* pt_regs->r8 = 0 */
+ xorq %r8, %r8 /* nospec r8 */
pushq $0 /* pt_regs->r9 = 0 */
+ xorq %r9, %r9 /* nospec r9 */
pushq $0 /* pt_regs->r10 = 0 */
+ xorq %r10, %r10 /* nospec r10 */
pushq $0 /* pt_regs->r11 = 0 */
+ xorq %r11, %r11 /* nospec r11 */
pushq %rbx /* pt_regs->rbx */
+ xorl %ebx, %ebx /* nospec rbx */
pushq %rbp /* pt_regs->rbp */
+ xorl %ebp, %ebp /* nospec rbp */
pushq %r12 /* pt_regs->r12 */
+ xorq %r12, %r12 /* nospec r12 */
pushq %r13 /* pt_regs->r13 */
+ xorq %r13, %r13 /* nospec r13 */
pushq %r14 /* pt_regs->r14 */
+ xorq %r14, %r14 /* nospec r14 */
pushq %r15 /* pt_regs->r15 */
+ xorq %r15, %r15 /* nospec r15 */
cld
/*
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Arnd Bergmann <[email protected]>
commit e8bfa0422469cdfc86be3f525f621b1d44d2481b upstream.
The clcd device is lacking an interrupt-parent property, which makes
the interrupt unusable and shows up as a warning with the latest
dtc version:
arch/arm/boot/dts/ste-nomadik-s8815.dtb: Warning (interrupts_property): Missing interrupt-parent for /amba/clcd@10120000
arch/arm/boot/dts/ste-nomadik-nhk15.dtb: Warning (interrupts_property): Missing interrupt-parent for /amba/clcd@10120000
I looked up the old board files and found that this interrupt has
the same irqchip as all the other on-chip device, it just needs one
extra line.
Fixes: 17470b7da11c ("ARM: dts: add the CLCD LCD display to the NHK15")
Reviewed-by: Linus Walleij <[email protected]>
Cc: [email protected]
Signed-off-by: Arnd Bergmann <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/arm/boot/dts/ste-nomadik-stn8815.dtsi | 1 +
1 file changed, 1 insertion(+)
--- a/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi
+++ b/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi
@@ -750,6 +750,7 @@
reg = <0x10120000 0x1000>;
interrupt-names = "combined";
interrupts = <14>;
+ interrupt-parent = <&vica>;
clocks = <&clcdclk>, <&hclkclcd>;
clock-names = "clcdclk", "apb_pclk";
status = "disabled";
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Bjorn Andersson <[email protected]>
commit 566bd8902e7fa20bd412ed753e09e89c1c96939c upstream.
SMSM is not symmetrical, the incoming bits from WCNSS are available at
index 6, but the outgoing host id for WCNSS is 3. Further more, upstream
references the base of APCS (in contrast to downstream), so the register
offset of 8 must be included.
Fixes: 1fb47e0a9ba4 ("arm64: dts: qcom: msm8916: Add smsm and smp2p nodes")
Cc: [email protected]
Reported-by: Ramon Fried <[email protected]>
Signed-off-by: Bjorn Andersson <[email protected]>
Signed-off-by: Andy Gross <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/arm64/boot/dts/qcom/msm8916.dtsi | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/arch/arm64/boot/dts/qcom/msm8916.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi
@@ -1430,8 +1430,8 @@
#address-cells = <1>;
#size-cells = <0>;
- qcom,ipc-1 = <&apcs 0 13>;
- qcom,ipc-6 = <&apcs 0 19>;
+ qcom,ipc-1 = <&apcs 8 13>;
+ qcom,ipc-3 = <&apcs 8 19>;
apps_smsm: apps@0 {
reg = <0>;
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Michael J. Ruhl <[email protected]>
commit 2ff124d597c2df8696169ce0006fc974c49a4569 upstream.
The ev_file is an optional parameter for CQ creation. If the parameter
is not passed, the ev_file pointer will be NULL. Using that pointer
to set the cq_context will result in an OOPs.
Verify that ev_file is not NULL before using.
Cc: <[email protected]> # 4.14.x
Fixes: 9ee79fce3642 ("IB/core: Add completion queue (cq) object actions")
Reviewed-by: Dennis Dalessandro <[email protected]>
Reviewed-by: Ira Weiny <[email protected]>
Signed-off-by: Michael J. Ruhl <[email protected]>
Signed-off-by: Dennis Dalessandro <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/infiniband/core/uverbs_std_types.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/infiniband/core/uverbs_std_types.c
+++ b/drivers/infiniband/core/uverbs_std_types.c
@@ -315,7 +315,7 @@ static int uverbs_create_cq_handler(stru
cq->uobject = &obj->uobject;
cq->comp_handler = ib_uverbs_comp_handler;
cq->event_handler = ib_uverbs_cq_event_handler;
- cq->cq_context = &ev_file->ev_queue;
+ cq->cq_context = ev_file ? &ev_file->ev_queue : NULL;
obj->uobject.object = cq;
obj->uobject.user_handle = user_handle;
atomic_set(&cq->usecnt, 0);
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Bart Van Assche <[email protected]>
commit 02ee9da347873699603d9ce0112a80b5dd69dea1 upstream.
Eliminate the WARN_ONs that create following two warnings when
registering an rxe device:
WARNING: CPU: 2 PID: 1005 at drivers/infiniband/core/device.c:449 ib_register_device+0x591/0x640 [ib_core]
CPU: 2 PID: 1005 Comm: run_tests Not tainted 4.15.0-rc4-dbg+ #2
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.0.0-prebuilt.qemu-project.org 04/01/2014
RIP: 0010:ib_register_device+0x591/0x640 [ib_core]
Call Trace:
rxe_register_device+0x3c6/0x470 [rdma_rxe]
rxe_add+0x543/0x5e0 [rdma_rxe]
rxe_net_add+0x37/0xb0 [rdma_rxe]
rxe_param_set_add+0x5a/0x120 [rdma_rxe]
param_attr_store+0x5e/0xc0
module_attr_store+0x19/0x30
sysfs_kf_write+0x3d/0x50
kernfs_fop_write+0x116/0x1a0
__vfs_write+0x23/0x120
vfs_write+0xbe/0x1b0
SyS_write+0x44/0xa0
entry_SYSCALL_64_fastpath+0x23/0x9a
WARNING: CPU: 2 PID: 1005 at drivers/infiniband/core/sysfs.c:1279 ib_device_register_sysfs+0x11d/0x160 [ib_core]
CPU: 2 PID: 1005 Comm: run_tests Tainted: G W 4.15.0-rc4-dbg+ #2
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.0.0-prebuilt.qemu-project.org 04/01/2014
RIP: 0010:ib_device_register_sysfs+0x11d/0x160 [ib_core]
Call Trace:
ib_register_device+0x3f7/0x640 [ib_core]
rxe_register_device+0x3c6/0x470 [rdma_rxe]
rxe_add+0x543/0x5e0 [rdma_rxe]
rxe_net_add+0x37/0xb0 [rdma_rxe]
rxe_param_set_add+0x5a/0x120 [rdma_rxe]
param_attr_store+0x5e/0xc0
module_attr_store+0x19/0x30
sysfs_kf_write+0x3d/0x50
kernfs_fop_write+0x116/0x1a0
__vfs_write+0x23/0x120
vfs_write+0xbe/0x1b0
SyS_write+0x44/0xa0
entry_SYSCALL_64_fastpath+0x23/0x9a
The code should accept either a parent pointer or a fully specified DMA
specification without producing warnings.
Fixes: 99db9494035f ("IB/core: Remove ib_device.dma_device")
Signed-off-by: Bart Van Assche <[email protected]>
Cc: Leon Romanovsky <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/infiniband/core/device.c | 20 ++++++++++++++------
drivers/infiniband/core/sysfs.c | 1 -
2 files changed, 14 insertions(+), 7 deletions(-)
--- a/drivers/infiniband/core/device.c
+++ b/drivers/infiniband/core/device.c
@@ -446,7 +446,6 @@ int ib_register_device(struct ib_device
struct ib_udata uhw = {.outlen = 0, .inlen = 0};
struct device *parent = device->dev.parent;
- WARN_ON_ONCE(!parent);
WARN_ON_ONCE(device->dma_device);
if (device->dev.dma_ops) {
/*
@@ -455,16 +454,25 @@ int ib_register_device(struct ib_device
* into device->dev.
*/
device->dma_device = &device->dev;
- if (!device->dev.dma_mask)
- device->dev.dma_mask = parent->dma_mask;
- if (!device->dev.coherent_dma_mask)
- device->dev.coherent_dma_mask =
- parent->coherent_dma_mask;
+ if (!device->dev.dma_mask) {
+ if (parent)
+ device->dev.dma_mask = parent->dma_mask;
+ else
+ WARN_ON_ONCE(true);
+ }
+ if (!device->dev.coherent_dma_mask) {
+ if (parent)
+ device->dev.coherent_dma_mask =
+ parent->coherent_dma_mask;
+ else
+ WARN_ON_ONCE(true);
+ }
} else {
/*
* The caller did not provide custom DMA operations. Use the
* DMA mapping operations of the parent device.
*/
+ WARN_ON_ONCE(!parent);
device->dma_device = parent;
}
--- a/drivers/infiniband/core/sysfs.c
+++ b/drivers/infiniband/core/sysfs.c
@@ -1262,7 +1262,6 @@ int ib_device_register_sysfs(struct ib_d
int ret;
int i;
- WARN_ON_ONCE(!device->dev.parent);
ret = dev_set_name(class_dev, "%s", device->name);
if (ret)
return ret;
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Arnd Bergmann <[email protected]>
commit 4c1baad223906943b595a887305f2e8124821dad upstream.
Running the compaction_test sometimes results in out-of-memory
failures. When I debugged this, it turned out that the code to
reset the number of hugepages to the initial value is simply
broken since we write into an open sysctl file descriptor
multiple times without seeking back to the start.
Adding the lseek here fixes the problem.
Cc: [email protected]
Reported-by: Naresh Kamboju <[email protected]>
Link: https://bugs.linaro.org/show_bug.cgi?id=3145
Signed-off-by: Arnd Bergmann <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
tools/testing/selftests/vm/compaction_test.c | 2 ++
1 file changed, 2 insertions(+)
--- a/tools/testing/selftests/vm/compaction_test.c
+++ b/tools/testing/selftests/vm/compaction_test.c
@@ -137,6 +137,8 @@ int check_compaction(unsigned long mem_f
printf("No of huge pages allocated = %d\n",
(atoi(nr_hugepages)));
+ lseek(fd, 0, SEEK_SET);
+
if (write(fd, initial_nr_hugepages, strlen(initial_nr_hugepages))
!= strlen(initial_nr_hugepages)) {
perror("Failed to write value to /proc/sys/vm/nr_hugepages\n");
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Nathan Fontenot <[email protected]>
commit 1d9a090783bef19fe8cdec878620d22f05191316 upstream.
When DLPAR removing a CPU, the unmapping of the cpu from a node in
unmap_cpu_from_node() should also invalidate the CPUs entry in the
numa_cpu_lookup_table. There is not a guarantee that on a subsequent
DLPAR add of the CPU the associativity will be the same and thus
could be in a different node. Invalidating the entry in the
numa_cpu_lookup_table causes the associativity to be read from the
device tree at the time of the add.
The current behavior of not invalidating the CPUs entry in the
numa_cpu_lookup_table can result in scenarios where the the topology
layout of CPUs in the partition does not match the device tree
or the topology reported by the HMC.
This bug looks like it was introduced in 2004 in the commit titled
"ppc64: cpu hotplug notifier for numa", which is 6b15e4e87e32 in the
linux-fullhist tree. Hence tag it for all stable releases.
Cc: [email protected]
Signed-off-by: Nathan Fontenot <[email protected]>
Reviewed-by: Tyrel Datwyler <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/powerpc/include/asm/topology.h | 5 +++++
arch/powerpc/mm/numa.c | 5 -----
arch/powerpc/platforms/pseries/hotplug-cpu.c | 2 ++
3 files changed, 7 insertions(+), 5 deletions(-)
--- a/arch/powerpc/include/asm/topology.h
+++ b/arch/powerpc/include/asm/topology.h
@@ -44,6 +44,11 @@ extern int sysfs_add_device_to_node(stru
extern void sysfs_remove_device_from_node(struct device *dev, int nid);
extern int numa_update_cpu_topology(bool cpus_locked);
+static inline void update_numa_cpu_lookup_table(unsigned int cpu, int node)
+{
+ numa_cpu_lookup_table[cpu] = node;
+}
+
static inline int early_cpu_to_node(int cpu)
{
int nid;
--- a/arch/powerpc/mm/numa.c
+++ b/arch/powerpc/mm/numa.c
@@ -142,11 +142,6 @@ static void reset_numa_cpu_lookup_table(
numa_cpu_lookup_table[cpu] = -1;
}
-static void update_numa_cpu_lookup_table(unsigned int cpu, int node)
-{
- numa_cpu_lookup_table[cpu] = node;
-}
-
static void map_cpu_to_node(int cpu, int node)
{
update_numa_cpu_lookup_table(cpu, node);
--- a/arch/powerpc/platforms/pseries/hotplug-cpu.c
+++ b/arch/powerpc/platforms/pseries/hotplug-cpu.c
@@ -36,6 +36,7 @@
#include <asm/xics.h>
#include <asm/xive.h>
#include <asm/plpar_wrappers.h>
+#include <asm/topology.h>
#include "pseries.h"
#include "offline_states.h"
@@ -331,6 +332,7 @@ static void pseries_remove_processor(str
BUG_ON(cpu_online(cpu));
set_cpu_present(cpu, false);
set_hard_smp_processor_id(cpu, -1);
+ update_numa_cpu_lookup_table(cpu, -1);
break;
}
if (cpu >= nr_cpu_ids)
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Bart Van Assche <[email protected]>
commit 65567e41219888feec72fee1de98ccf1efbbc16d upstream.
The rxe driver works as follows:
* The send queue, receive queue and completion queues are implemented as
circular buffers.
* ib_post_send() and ib_post_recv() calls are serialized through a spinlock.
* Removing elements from various queues happens from tasklet
context. Tasklets are guaranteed to run on at most one CPU. This serializes
access to these queues. See also rxe_completer(), rxe_requester() and
rxe_responder().
* rxe_completer() processes the skbs queued onto qp->resp_pkts.
* rxe_requester() handles the send queue (qp->sq.queue).
* rxe_responder() processes the skbs queued onto qp->req_pkts.
Since rxe_drain_req_pkts() processes qp->req_pkts, calling
rxe_drain_req_pkts() from rxe_requester() is racy. Hence this patch.
Reported-by: Moni Shoua <[email protected]>
Signed-off-by: Bart Van Assche <[email protected]>
Cc: [email protected]
Signed-off-by: Doug Ledford <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/infiniband/sw/rxe/rxe_loc.h | 1 -
drivers/infiniband/sw/rxe/rxe_req.c | 9 +--------
drivers/infiniband/sw/rxe/rxe_resp.c | 2 +-
3 files changed, 2 insertions(+), 10 deletions(-)
--- a/drivers/infiniband/sw/rxe/rxe_loc.h
+++ b/drivers/infiniband/sw/rxe/rxe_loc.h
@@ -237,7 +237,6 @@ int rxe_srq_from_attr(struct rxe_dev *rx
void rxe_release(struct kref *kref);
-void rxe_drain_req_pkts(struct rxe_qp *qp, bool notify);
int rxe_completer(void *arg);
int rxe_requester(void *arg);
int rxe_responder(void *arg);
--- a/drivers/infiniband/sw/rxe/rxe_req.c
+++ b/drivers/infiniband/sw/rxe/rxe_req.c
@@ -594,15 +594,8 @@ int rxe_requester(void *arg)
rxe_add_ref(qp);
next_wqe:
- if (unlikely(!qp->valid)) {
- rxe_drain_req_pkts(qp, true);
+ if (unlikely(!qp->valid || qp->req.state == QP_STATE_ERROR))
goto exit;
- }
-
- if (unlikely(qp->req.state == QP_STATE_ERROR)) {
- rxe_drain_req_pkts(qp, true);
- goto exit;
- }
if (unlikely(qp->req.state == QP_STATE_RESET)) {
qp->req.wqe_index = consumer_index(qp->sq.queue);
--- a/drivers/infiniband/sw/rxe/rxe_resp.c
+++ b/drivers/infiniband/sw/rxe/rxe_resp.c
@@ -1210,7 +1210,7 @@ static enum resp_states do_class_d1e_err
}
}
-void rxe_drain_req_pkts(struct rxe_qp *qp, bool notify)
+static void rxe_drain_req_pkts(struct rxe_qp *qp, bool notify)
{
struct sk_buff *skb;
On 21 February 2018 at 18:16, Greg Kroah-Hartman
<[email protected]> wrote:
> This is the start of the stable review cycle for the 4.14.21 release.
> There are 167 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Fri Feb 23 12:44:42 UTC 2018.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.14.21-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.14.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
Results from Linaro’s test farm.
No regressions on arm64, arm and x86_64.
Summary
------------------------------------------------------------------------
kernel: 4.14.21-rc1
git repo: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
git branch: linux-4.14.y
git commit: 20a80dd2bbb095f1b2ae2e72143f12ff8b605382
git describe: v4.14.20-168-g20a80dd2bbb0
Test details: https://qa-reports.linaro.org/lkft/linux-stable-rc-4.14-oe/build/v4.14.20-168-g20a80dd2bbb0
No regressions (compared to build v4.14.20-119-g1b1ab1d5c50b)
Boards, architectures and test suites:
-------------------------------------
hi6220-hikey - arm64
* boot - pass: 20,
* kselftest - skip: 17, pass: 48,
* libhugetlbfs - skip: 1, pass: 90,
* ltp-cap_bounds-tests - pass: 2,
* ltp-containers-tests - skip: 17, pass: 64,
* ltp-fcntl-locktests-tests - pass: 2,
* ltp-filecaps-tests - pass: 2,
* ltp-fs-tests - skip: 2, pass: 61,
* ltp-fs_bind-tests - pass: 2,
* ltp-fs_perms_simple-tests - pass: 19,
* ltp-fsx-tests - pass: 2,
* ltp-hugetlb-tests - skip: 1, pass: 21,
* ltp-io-tests - pass: 3,
* ltp-ipc-tests - pass: 9,
* ltp-math-tests - pass: 11,
* ltp-nptl-tests - pass: 2,
* ltp-pty-tests - pass: 4,
* ltp-sched-tests - skip: 4, pass: 10,
* ltp-securebits-tests - pass: 4,
* ltp-syscalls-tests - skip: 151, pass: 999,
* ltp-timers-tests - skip: 1, pass: 12,
juno-r2 - arm64
* boot - pass: 20,
* kselftest - skip: 17, pass: 48,
* libhugetlbfs - skip: 1, pass: 90,
* ltp-cap_bounds-tests - pass: 2,
* ltp-containers-tests - skip: 17, pass: 64,
* ltp-fcntl-locktests-tests - pass: 2,
* ltp-filecaps-tests - pass: 2,
* ltp-fs-tests - skip: 2, pass: 61,
* ltp-fs_bind-tests - pass: 2,
* ltp-fs_perms_simple-tests - pass: 19,
* ltp-fsx-tests - pass: 2,
* ltp-hugetlb-tests - pass: 22,
* ltp-io-tests - pass: 3,
* ltp-ipc-tests - pass: 9,
* ltp-math-tests - pass: 11,
* ltp-nptl-tests - pass: 2,
* ltp-pty-tests - pass: 4,
* ltp-sched-tests - skip: 4, pass: 10,
* ltp-securebits-tests - pass: 4,
* ltp-syscalls-tests - skip: 149, pass: 1001,
* ltp-timers-tests - skip: 1, pass: 12,
x15 - arm
* boot - pass: 20,
* kselftest - skip: 19, pass: 45,
* libhugetlbfs - skip: 1, pass: 87,
* ltp-cap_bounds-tests - pass: 2,
* ltp-containers-tests - skip: 17, pass: 64,
* ltp-fcntl-locktests-tests - pass: 2,
* ltp-filecaps-tests - pass: 2,
* ltp-fs-tests - skip: 2, pass: 61,
* ltp-fs_bind-tests - pass: 2,
* ltp-fs_perms_simple-tests - pass: 19,
* ltp-fsx-tests - pass: 2,
* ltp-hugetlb-tests - skip: 2, pass: 20,
* ltp-io-tests - pass: 3,
* ltp-ipc-tests - pass: 9,
* ltp-math-tests - pass: 11,
* ltp-nptl-tests - pass: 2,
* ltp-pty-tests - pass: 4,
* ltp-sched-tests - skip: 1, pass: 13,
* ltp-securebits-tests - pass: 4,
* ltp-syscalls-tests - skip: 97, pass: 1053,
* ltp-timers-tests - skip: 1, pass: 12,
x86_64
* boot - pass: 20,
* kselftest - skip: 19, pass: 61,
* libhugetlbfs - skip: 1, pass: 90,
* ltp-cap_bounds-tests - pass: 2,
* ltp-containers-tests - skip: 17, pass: 64,
* ltp-fcntl-locktests-tests - pass: 2,
* ltp-filecaps-tests - pass: 2,
* ltp-fs-tests - skip: 1, pass: 62,
* ltp-fs_bind-tests - pass: 2,
* ltp-fs_perms_simple-tests - pass: 19,
* ltp-fsx-tests - pass: 2,
* ltp-hugetlb-tests - pass: 22,
* ltp-io-tests - pass: 3,
* ltp-ipc-tests - pass: 9,
* ltp-math-tests - pass: 11,
* ltp-nptl-tests - pass: 2,
* ltp-pty-tests - pass: 4,
* ltp-sched-tests - skip: 5, pass: 9,
* ltp-securebits-tests - pass: 4,
* ltp-syscalls-tests - skip: 119, pass: 1031,
* ltp-timers-tests - skip: 1, pass: 12,
Tested-by: Naresh Kamboju <[email protected]>
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Lukas Wunner <[email protected]>
commit 433986c2c265d106d6a8e88006e0131fefc92b7b upstream.
Commit baa8809f6097 (PM / runtime: Optimize the use of device links)
added an invocation of pm_runtime_drop_link() to __device_link_del().
However there are two variants of that function, one for CONFIG_SRCU and
another for !CONFIG_SRCU, and the commit only modified the former.
Fixes: baa8809f6097 (PM / runtime: Optimize the use of device links)
Cc: v4.10+ <[email protected]> # v4.10+
Signed-off-by: Lukas Wunner <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/base/core.c | 3 +++
1 file changed, 3 insertions(+)
--- a/drivers/base/core.c
+++ b/drivers/base/core.c
@@ -313,6 +313,9 @@ static void __device_link_del(struct dev
dev_info(link->consumer, "Dropping the link to %s\n",
dev_name(link->supplier));
+ if (link->flags & DL_FLAG_PM_RUNTIME)
+ pm_runtime_drop_link(link->consumer);
+
list_del(&link->s_node);
list_del(&link->c_node);
device_link_free(link);
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Stewart Smith <[email protected]>
commit 5b8b58063029f02da573120ef4dc9079822e3cda upstream.
According to the OPAL docs:
skiboot-5.2.5/doc/opal-api/opal-rtc-read-3.txt
skiboot-5.2.5/doc/opal-api/opal-rtc-write-4.txt
OPAL_HARDWARE may be returned from OPAL_RTC_READ or OPAL_RTC_WRITE and
this indicates either a transient or permanent error.
Prior to this patch, Linux was not dealing with OPAL_HARDWARE being a
permanent error particularly well, in that you could end up in a busy
loop.
This was not too hard to trigger on an AMI BMC based OpenPOWER machine
doing a continuous "ipmitool mc reset cold" to the BMC, the result of
that being that we'd get stuck in an infinite loop in
opal_get_rtc_time().
We now retry a few times before returning the error higher up the
stack.
Fixes: 16b1d26e77b1 ("rtc/tpo: Driver to support rtc and wakeup on PowerNV platform")
Cc: [email protected] # v3.19+
Signed-off-by: Stewart Smith <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/rtc/rtc-opal.c | 12 ++++++++++--
1 file changed, 10 insertions(+), 2 deletions(-)
--- a/drivers/rtc/rtc-opal.c
+++ b/drivers/rtc/rtc-opal.c
@@ -58,6 +58,7 @@ static void tm_to_opal(struct rtc_time *
static int opal_get_rtc_time(struct device *dev, struct rtc_time *tm)
{
long rc = OPAL_BUSY;
+ int retries = 10;
u32 y_m_d;
u64 h_m_s_ms;
__be32 __y_m_d;
@@ -67,8 +68,11 @@ static int opal_get_rtc_time(struct devi
rc = opal_rtc_read(&__y_m_d, &__h_m_s_ms);
if (rc == OPAL_BUSY_EVENT)
opal_poll_events(NULL);
- else
+ else if (retries-- && (rc == OPAL_HARDWARE
+ || rc == OPAL_INTERNAL_ERROR))
msleep(10);
+ else if (rc != OPAL_BUSY && rc != OPAL_BUSY_EVENT)
+ break;
}
if (rc != OPAL_SUCCESS)
@@ -84,6 +88,7 @@ static int opal_get_rtc_time(struct devi
static int opal_set_rtc_time(struct device *dev, struct rtc_time *tm)
{
long rc = OPAL_BUSY;
+ int retries = 10;
u32 y_m_d = 0;
u64 h_m_s_ms = 0;
@@ -92,8 +97,11 @@ static int opal_set_rtc_time(struct devi
rc = opal_rtc_write(y_m_d, h_m_s_ms);
if (rc == OPAL_BUSY_EVENT)
opal_poll_events(NULL);
- else
+ else if (retries-- && (rc == OPAL_HARDWARE
+ || rc == OPAL_INTERNAL_ERROR))
msleep(10);
+ else if (rc != OPAL_BUSY && rc != OPAL_BUSY_EVENT)
+ break;
}
return rc == OPAL_SUCCESS ? 0 : -EIO;
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Josh Poimboeuf <[email protected]>
commit 2b5db66862b95532cb6cca8165ae6eb73633cf85 upstream.
By default, objtool assumes that a UD2 is a dead end. This is mainly
because GCC 7+ sometimes inserts a UD2 when it detects a divide-by-zero
condition.
Now that WARN() is moving back to UD2, annotate the code after it as
reachable so objtool can follow the code flow.
Reported-by: Borislav Petkov <[email protected]>
Signed-off-by: Josh Poimboeuf <[email protected]>
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Cc: Andy Lutomirski <[email protected]>
Cc: Arjan van de Ven <[email protected]>
Cc: Brian Gerst <[email protected]>
Cc: Denys Vlasenko <[email protected]>
Cc: H. Peter Anvin <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: kbuild test robot <[email protected]>
Link: http://lkml.kernel.org/r/0e483379275a42626ba8898117f918e1bf661e40.1518130694.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/include/asm/bug.h | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
--- a/arch/x86/include/asm/bug.h
+++ b/arch/x86/include/asm/bug.h
@@ -77,7 +77,11 @@ do { \
unreachable(); \
} while (0)
-#define __WARN_FLAGS(flags) _BUG_FLAGS(ASM_UD0, BUGFLAG_WARNING|(flags))
+#define __WARN_FLAGS(flags) \
+do { \
+ _BUG_FLAGS(ASM_UD0, BUGFLAG_WARNING|(flags)); \
+ annotate_reachable(); \
+} while (0)
#include <asm-generic/bug.h>
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Peter Zijlstra <[email protected]>
commit 3b3a371cc9bc980429baabe0a8e5f307f3d1f463 upstream.
Since the Intel SDM added an ModR/M byte to UD0 and binutils followed
that specification, we now cannot disassemble our kernel anymore.
This now means Intel and AMD disagree on the encoding of UD0. And instead
of playing games with additional bytes that are valid ModR/M and single
byte instructions (0xd6 for instance), simply use UD2 for both WARN() and
BUG().
Requested-by: Linus Torvalds <[email protected]>
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Acked-by: Linus Torvalds <[email protected]>
Cc: Andy Lutomirski <[email protected]>
Cc: Arjan van de Ven <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: Brian Gerst <[email protected]>
Cc: Denys Vlasenko <[email protected]>
Cc: H. Peter Anvin <[email protected]>
Cc: Josh Poimboeuf <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Ingo Molnar <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/include/asm/bug.h | 15 ++++++---------
arch/x86/kernel/traps.c | 2 +-
2 files changed, 7 insertions(+), 10 deletions(-)
--- a/arch/x86/include/asm/bug.h
+++ b/arch/x86/include/asm/bug.h
@@ -5,23 +5,20 @@
#include <linux/stringify.h>
/*
- * Since some emulators terminate on UD2, we cannot use it for WARN.
- * Since various instruction decoders disagree on the length of UD1,
- * we cannot use it either. So use UD0 for WARN.
+ * Despite that some emulators terminate on UD2, we use it for WARN().
*
- * (binutils knows about "ud1" but {en,de}codes it as 2 bytes, whereas
- * our kernel decoder thinks it takes a ModRM byte, which seems consistent
- * with various things like the Intel SDM instruction encoding rules)
+ * Since various instruction decoders/specs disagree on the encoding of
+ * UD0/UD1.
*/
-#define ASM_UD0 ".byte 0x0f, 0xff"
+#define ASM_UD0 ".byte 0x0f, 0xff" /* + ModRM (for Intel) */
#define ASM_UD1 ".byte 0x0f, 0xb9" /* + ModRM */
#define ASM_UD2 ".byte 0x0f, 0x0b"
#define INSN_UD0 0xff0f
#define INSN_UD2 0x0b0f
-#define LEN_UD0 2
+#define LEN_UD2 2
#ifdef CONFIG_GENERIC_BUG
@@ -79,7 +76,7 @@ do { \
#define __WARN_FLAGS(flags) \
do { \
- _BUG_FLAGS(ASM_UD0, BUGFLAG_WARNING|(flags)); \
+ _BUG_FLAGS(ASM_UD2, BUGFLAG_WARNING|(flags)); \
annotate_reachable(); \
} while (0)
--- a/arch/x86/kernel/traps.c
+++ b/arch/x86/kernel/traps.c
@@ -181,7 +181,7 @@ int fixup_bug(struct pt_regs *regs, int
break;
case BUG_TRAP_TYPE_WARN:
- regs->ip += LEN_UD0;
+ regs->ip += LEN_UD2;
return 1;
}
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Borislav Petkov <[email protected]>
commit b498c261107461d5c42140dfddd05df83d8ca078 upstream.
That macro was touched around 2.5.8 times, judging by the full history
linux repo, but it was unused even then. Get rid of it already.
Signed-off-by: Borislav Petkov <[email protected]>
Cc: Andy Lutomirski <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: Brian Gerst <[email protected]>
Cc: Denys Vlasenko <[email protected]>
Cc: H. Peter Anvin <[email protected]>
Cc: Josh Poimboeuf <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: [email protected]
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Ingo Molnar <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/entry/calling.h | 4 ----
1 file changed, 4 deletions(-)
--- a/arch/x86/entry/calling.h
+++ b/arch/x86/entry/calling.h
@@ -159,10 +159,6 @@ For 32-bit we have the following convent
.if \pop_rdi
popq %rdi
.endif
- .endm
-
- .macro icebp
- .byte 0xf1
.endm
/*
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Dominik Brodowski <[email protected]>
commit f7bafa2b05ef25eda1d9179fd930b0330cf2b7d1 upstream.
Same as is done for syscalls, interleave XOR with PUSH instructions
for exceptions/interrupts, in order to minimize the cost of the
additional instructions required for register clearing.
Signed-off-by: Dominik Brodowski <[email protected]>
Cc: Andy Lutomirski <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: Brian Gerst <[email protected]>
Cc: Denys Vlasenko <[email protected]>
Cc: H. Peter Anvin <[email protected]>
Cc: Josh Poimboeuf <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: [email protected]
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Ingo Molnar <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/entry/calling.h | 40 +++++++++++++++++++---------------------
arch/x86/entry/entry_64.S | 30 +++++++++++++++++++++---------
2 files changed, 40 insertions(+), 30 deletions(-)
--- a/arch/x86/entry/calling.h
+++ b/arch/x86/entry/calling.h
@@ -101,44 +101,42 @@ For 32-bit we have the following convent
addq $-(15*8), %rsp
.endm
- .macro SAVE_REGS offset=0
+ .macro SAVE_AND_CLEAR_REGS offset=0
+ /*
+ * Save registers and sanitize registers of values that a
+ * speculation attack might otherwise want to exploit. The
+ * lower registers are likely clobbered well before they
+ * could be put to use in a speculative execution gadget.
+ * Interleave XOR with PUSH for better uop scheduling:
+ */
movq %rdi, 14*8+\offset(%rsp)
movq %rsi, 13*8+\offset(%rsp)
movq %rdx, 12*8+\offset(%rsp)
movq %rcx, 11*8+\offset(%rsp)
movq %rax, 10*8+\offset(%rsp)
movq %r8, 9*8+\offset(%rsp)
+ xorq %r8, %r8 /* nospec r8 */
movq %r9, 8*8+\offset(%rsp)
+ xorq %r9, %r9 /* nospec r9 */
movq %r10, 7*8+\offset(%rsp)
+ xorq %r10, %r10 /* nospec r10 */
movq %r11, 6*8+\offset(%rsp)
+ xorq %r11, %r11 /* nospec r11 */
movq %rbx, 5*8+\offset(%rsp)
+ xorl %ebx, %ebx /* nospec rbx */
movq %rbp, 4*8+\offset(%rsp)
+ xorl %ebp, %ebp /* nospec rbp */
movq %r12, 3*8+\offset(%rsp)
+ xorq %r12, %r12 /* nospec r12 */
movq %r13, 2*8+\offset(%rsp)
+ xorq %r13, %r13 /* nospec r13 */
movq %r14, 1*8+\offset(%rsp)
+ xorq %r14, %r14 /* nospec r14 */
movq %r15, 0*8+\offset(%rsp)
+ xorq %r15, %r15 /* nospec r15 */
UNWIND_HINT_REGS offset=\offset
.endm
- /*
- * Sanitize registers of values that a speculation attack
- * might otherwise want to exploit. The lower registers are
- * likely clobbered well before they could be put to use in
- * a speculative execution gadget:
- */
- .macro CLEAR_REGS_NOSPEC
- xorl %ebp, %ebp
- xorl %ebx, %ebx
- xorq %r8, %r8
- xorq %r9, %r9
- xorq %r10, %r10
- xorq %r11, %r11
- xorq %r12, %r12
- xorq %r13, %r13
- xorq %r14, %r14
- xorq %r15, %r15
- .endm
-
.macro POP_REGS pop_rdi=1 skip_r11rcx=0
popq %r15
popq %r14
@@ -177,7 +175,7 @@ For 32-bit we have the following convent
* is just setting the LSB, which makes it an invalid stack address and is also
* a signal to the unwinder that it's a pt_regs pointer in disguise.
*
- * NOTE: This macro must be used *after* SAVE_REGS because it corrupts
+ * NOTE: This macro must be used *after* SAVE_AND_CLEAR_REGS because it corrupts
* the original rbp.
*/
.macro ENCODE_FRAME_POINTER ptregs_offset=0
--- a/arch/x86/entry/entry_64.S
+++ b/arch/x86/entry/entry_64.S
@@ -561,8 +561,7 @@ END(irq_entries_start)
1:
ALLOC_PT_GPREGS_ON_STACK
- SAVE_REGS
- CLEAR_REGS_NOSPEC
+ SAVE_AND_CLEAR_REGS
ENCODE_FRAME_POINTER
testb $3, CS(%rsp)
@@ -1108,8 +1107,7 @@ ENTRY(xen_failsafe_callback)
UNWIND_HINT_IRET_REGS
pushq $-1 /* orig_ax = -1 => not a system call */
ALLOC_PT_GPREGS_ON_STACK
- SAVE_REGS
- CLEAR_REGS_NOSPEC
+ SAVE_AND_CLEAR_REGS
ENCODE_FRAME_POINTER
jmp error_exit
END(xen_failsafe_callback)
@@ -1153,8 +1151,7 @@ idtentry machine_check do_mce has_err
ENTRY(paranoid_entry)
UNWIND_HINT_FUNC
cld
- SAVE_REGS 8
- CLEAR_REGS_NOSPEC
+ SAVE_AND_CLEAR_REGS 8
ENCODE_FRAME_POINTER 8
movl $1, %ebx
movl $MSR_GS_BASE, %ecx
@@ -1205,8 +1202,7 @@ END(paranoid_exit)
ENTRY(error_entry)
UNWIND_HINT_FUNC
cld
- SAVE_REGS 8
- CLEAR_REGS_NOSPEC
+ SAVE_AND_CLEAR_REGS 8
ENCODE_FRAME_POINTER 8
testb $3, CS+8(%rsp)
jz .Lerror_kernelspace
@@ -1393,18 +1389,34 @@ ENTRY(nmi)
pushq (%rdx) /* pt_regs->dx */
pushq %rcx /* pt_regs->cx */
pushq %rax /* pt_regs->ax */
+ /*
+ * Sanitize registers of values that a speculation attack
+ * might otherwise want to exploit. The lower registers are
+ * likely clobbered well before they could be put to use in
+ * a speculative execution gadget. Interleave XOR with PUSH
+ * for better uop scheduling:
+ */
pushq %r8 /* pt_regs->r8 */
+ xorq %r8, %r8 /* nospec r8 */
pushq %r9 /* pt_regs->r9 */
+ xorq %r9, %r9 /* nospec r9 */
pushq %r10 /* pt_regs->r10 */
+ xorq %r10, %r10 /* nospec r10 */
pushq %r11 /* pt_regs->r11 */
+ xorq %r11, %r11 /* nospec r11*/
pushq %rbx /* pt_regs->rbx */
+ xorl %ebx, %ebx /* nospec rbx*/
pushq %rbp /* pt_regs->rbp */
+ xorl %ebp, %ebp /* nospec rbp*/
pushq %r12 /* pt_regs->r12 */
+ xorq %r12, %r12 /* nospec r12*/
pushq %r13 /* pt_regs->r13 */
+ xorq %r13, %r13 /* nospec r13*/
pushq %r14 /* pt_regs->r14 */
+ xorq %r14, %r14 /* nospec r14*/
pushq %r15 /* pt_regs->r15 */
+ xorq %r15, %r15 /* nospec r15*/
UNWIND_HINT_REGS
- CLEAR_REGS_NOSPEC
ENCODE_FRAME_POINTER
/*
On 02/21/2018 05:46 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.14.21 release.
> There are 167 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Fri Feb 23 12:44:42 UTC 2018.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.14.21-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.14.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
>
Compiled and booted on my test system. No dmesg regressions.
thanks,
-- Shuah
On 02/21/2018 04:46 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.14.21 release.
> There are 167 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Fri Feb 23 12:44:42 UTC 2018.
> Anything received after that time might be too late.
>
Build results:
total: 145 pass: 145 fail: 0
Qemu test results:
total: 126 pass: 126 fail: 0
Details are available at http://kerneltests.org/builders.
Guenter