This is the start of the stable review cycle for the 5.4.120 release.
There are 141 patches in this series, all will be posted as a response
to this one. If anyone has any issues with these being applied, please
let me know.
Responses should be made by Wed, 19 May 2021 14:02:20 +0000.
Anything received after that time might be too late.
The whole patch series can be found in one patch at:
https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.4.120-rc1.gz
or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.4.y
and the diffstat can be found below.
thanks,
greg k-h
-------------
Pseudo-Shortlog of commits:
Greg Kroah-Hartman <[email protected]>
Linux 5.4.120-rc1
Kuninori Morimoto <[email protected]>
ASoC: rsnd: check all BUSIF status when error
Christoph Hellwig <[email protected]>
nvme: do not try to reconfigure APST when the controller is not live
Paweł Chmiel <[email protected]>
clk: exynos7: Mark aclk_fsys1_200 as critical
Jonathon Reinhart <[email protected]>
netfilter: conntrack: Make global sysctls readonly in non-init netns
Greg Kroah-Hartman <[email protected]>
kobject_uevent: remove warning in init_uevent_argv()
Badhri Jagan Sridharan <[email protected]>
usb: typec: tcpm: Fix error while calculating PPS out values
Ard Biesheuvel <[email protected]>
ARM: 9027/1: head.S: explicitly map DT even if it lives in the first physical section
Ard Biesheuvel <[email protected]>
ARM: 9020/1: mm: use correct section size macro to describe the FDT virtual address
Ard Biesheuvel <[email protected]>
ARM: 9012/1: move device tree mapping out of linear region
Ard Biesheuvel <[email protected]>
ARM: 9011/1: centralize phys-to-virt conversion of DT/ATAGS address
Eric Biggers <[email protected]>
f2fs: fix error handling in f2fs_end_enable_verity()
Lukasz Luba <[email protected]>
thermal/core/fair share: Lock the thermal zone while looping over instances
Maciej W. Rozycki <[email protected]>
MIPS: Avoid handcoded DIVU in `__div64_32' altogether
Maciej W. Rozycki <[email protected]>
MIPS: Avoid DIVU in `__div64_32' is result would be zero
Maciej W. Rozycki <[email protected]>
MIPS: Reinstate platform `__div64_32' handler
Maciej W. Rozycki <[email protected]>
FDDI: defxx: Make MMIO the configuration default except for EISA
Matthew Wilcox (Oracle) <[email protected]>
mm: fix struct page layout on 32-bit systems
Thomas Gleixner <[email protected]>
KVM: x86: Cancel pvclock_gtod_work on module removal
Oliver Neukum <[email protected]>
cdc-wdm: untangle a circular dependency between callback and softint
Colin Ian King <[email protected]>
iio: tsl2583: Fix division by a zero lux_val
Dmitry Osipenko <[email protected]>
iio: gyro: mpu3050: Fix reported temperature value
Sandeep Singh <[email protected]>
xhci: Add reset resume quirk for AMD xhci controller.
Christophe JAILLET <[email protected]>
xhci: Do not use GFP_KERNEL in (potentially) atomic context
Wesley Cheng <[email protected]>
usb: dwc3: gadget: Return success always for kick transfer in ep queue
Chunfeng Yun <[email protected]>
usb: core: hub: fix race condition about TRSMRCY of resume
Phil Elwell <[email protected]>
usb: dwc2: Fix gadget DMA unmap direction
Maximilian Luz <[email protected]>
usb: xhci: Increase timeout for HC halt
Ferry Toth <[email protected]>
usb: dwc3: pci: Enable usb2-gadget-lpm-disable for Intel Merrifield
Marcel Hamer <[email protected]>
usb: dwc3: omap: improve extcon initialization
Christoph Hellwig <[email protected]>
iomap: fix sub-page uptodate handling
Bart Van Assche <[email protected]>
blk-mq: Swap two calls in blk_mq_exit_queue()
Sun Ke <[email protected]>
nbd: Fix NULL pointer in flush_workqueue
Omar Sandoval <[email protected]>
kyber: fix out of bounds access when preempted
Christophe JAILLET <[email protected]>
ACPI: scan: Fix a memory leak in an error handling path
Eddie James <[email protected]>
hwmon: (occ) Fix poll rate limiting
Christophe JAILLET <[email protected]>
usb: fotg210-hcd: Fix an error message
Dinghao Liu <[email protected]>
iio: proximity: pulsedlight: Fix rumtime PM imbalance on error
Ville Syrjälä <[email protected]>
drm/i915: Avoid div-by-zero on gen2
Kai-Heng Feng <[email protected]>
drm/radeon/dpm: Disable sclk switching on Oland when two 4K 60Hz monitors are connected
Peter Xu <[email protected]>
mm/hugetlb: fix F_SEAL_FUTURE_WRITE
Axel Rasmussen <[email protected]>
userfaultfd: release page in error path to avoid BUG_ON
Phillip Lougher <[email protected]>
squashfs: fix divide error in calculate_skip()
Jouni Roivas <[email protected]>
hfsplus: prevent corruption in shrinking truncate
Michael Ellerman <[email protected]>
powerpc/64s: Fix crashes when toggling entry flush barrier
Michael Ellerman <[email protected]>
powerpc/64s: Fix crashes when toggling stf barrier
Vladimir Isaev <[email protected]>
ARC: mm: PAE: use 40-bit physical page mask
Vineet Gupta <[email protected]>
ARC: entry: fix off-by-one error in syscall number validation
Mateusz Palczewski <[email protected]>
i40e: Fix PHY type identifiers for 2.5G and 5G adapters
Jaroslaw Gawin <[email protected]>
i40e: fix the restart auto-negotiation after FEC modified
Yunjian Wang <[email protected]>
i40e: Fix use-after-free in i40e_client_subtask()
Eric Dumazet <[email protected]>
netfilter: nftables: avoid overflows in nft_hash_buckets()
Jia-Ju Bai <[email protected]>
kernel: kexec_file: fix error return code of kexec_calculate_store_digests()
Odin Ugedal <[email protected]>
sched/fair: Fix unfairness caused by missing load decay
Quentin Perret <[email protected]>
sched: Fix out-of-bound access in uclamp
Marc Kleine-Budde <[email protected]>
can: m_can: m_can_tx_work_queue(): fix tx_skb race condition
Pablo Neira Ayuso <[email protected]>
netfilter: nfnetlink_osf: Fix a missing skb_header_pointer() NULL check
Cong Wang <[email protected]>
smc: disallow TCP_ULP in smc_setsockopt()
Maciej Żenczykowski <[email protected]>
net: fix nla_strcmp to handle more then one trailing null character
Miaohe Lin <[email protected]>
ksm: fix potential missing rmap_item for stable_node
Miaohe Lin <[email protected]>
mm/migrate.c: fix potential indeterminate pte entry in migrate_vma_insert_page()
Miaohe Lin <[email protected]>
mm/hugeltb: handle the error case in hugetlb_fix_reserve_counts()
Miaohe Lin <[email protected]>
khugepaged: fix wrong result value for trace_mm_collapse_huge_page_isolate()
Kees Cook <[email protected]>
drm/radeon: Avoid power table parsing memory leaks
Kees Cook <[email protected]>
drm/radeon: Fix off-by-one power_state index heap overwrite
Pablo Neira Ayuso <[email protected]>
netfilter: xt_SECMARK: add new revision to fix structure layout
Xin Long <[email protected]>
sctp: fix a SCTP_MIB_CURRESTAB leak in sctp_sf_do_dupcook_b
Lv Yunlong <[email protected]>
ethernet:enic: Fix a use after free bug in enic_hard_start_xmit
Baptiste Lepers <[email protected]>
sunrpc: Fix misplaced barrier in call_decode
Anup Patel <[email protected]>
RISC-V: Fix error code returned by riscv_hartid_to_cpuid()
Xin Long <[email protected]>
sctp: do asoc update earlier in sctp_sf_do_dupcook_a
Yufeng Mo <[email protected]>
net: hns3: disable phy loopback setting in hclge_mac_start_phy
Peng Li <[email protected]>
net: hns3: use netif_tx_disable to stop the transmit queue
Hao Chen <[email protected]>
net: hns3: fix for vxlan gpe tx checksum bug
Jian Shen <[email protected]>
net: hns3: add check for HNS3_NIC_STATE_INITED in hns3_reset_notify_up_enet()
Yufeng Mo <[email protected]>
net: hns3: initialize the message content in hclge_get_link_mode()
Yufeng Mo <[email protected]>
net: hns3: fix incorrect configuration for igu_egu_hw_err
Nobuhiro Iwamatsu <[email protected]>
rtc: ds1307: Fix wday settings for rx8130
Jeff Layton <[email protected]>
ceph: fix inode leak on getattr error in __fh_to_dentry
Michael Walle <[email protected]>
rtc: fsl-ftm-alarm: add MODULE_TABLE()
Olga Kornievskaia <[email protected]>
NFSv4.2 fix handling of sr_eof in SEEK's reply
Nikola Livic <[email protected]>
pNFS/flexfiles: fix incorrect size check in decode_nfs_fh()
Yang Yingliang <[email protected]>
PCI: endpoint: Fix missing destroy_workqueue()
Trond Myklebust <[email protected]>
NFS: Deal correctly with attribute generation counter overflow
Trond Myklebust <[email protected]>
NFSv4.2: Always flush out writes in nfs42_proc_fallocate()
Jia-Ju Bai <[email protected]>
rpmsg: qcom_glink_native: fix error return code of qcom_glink_rx_data()
Zhen Lei <[email protected]>
ARM: 9064/1: hw_breakpoint: Do not directly check the event's overflow_handler hook
Dmitry Baryshkov <[email protected]>
PCI: Release OF node in pci_scan_device()'s error path
Pali Rohár <[email protected]>
PCI: iproc: Fix return value of iproc_msi_irq_domain_alloc()
Colin Ian King <[email protected]>
f2fs: fix a redundant call to f2fs_balance_fs if an error occurs
Jia-Ju Bai <[email protected]>
thermal: thermal_of: Fix error return code of thermal_of_populate_bind_params()
David Ward <[email protected]>
ASoC: rt286: Make RT286_SET_GPIO_* readable and writable
Sergei Trofimovich <[email protected]>
ia64: module: fix symbolizer crash on fdescr
Michael Chan <[email protected]>
bnxt_en: Add PCI IDs for Hyper-V VF devices.
Felix Fietkau <[email protected]>
net: ethernet: mtk_eth_soc: fix RX VLAN offload
Stefan Assmann <[email protected]>
iavf: remove duplicate free resources calls
Alexey Kardashevskiy <[email protected]>
powerpc/iommu: Annotate nested lock for lockdep
Lee Gibson <[email protected]>
qtnfmac: Fix possible buffer overflow in qtnf_event_handle_external_auth
Gustavo A. R. Silva <[email protected]>
wl3501_cs: Fix out-of-bounds warnings in wl3501_mgmt_join
Gustavo A. R. Silva <[email protected]>
wl3501_cs: Fix out-of-bounds warnings in wl3501_send_pkt
Robin Singh <[email protected]>
drm/amd/display: fixed divide by zero kernel crash during dsc enablement
Michael Ellerman <[email protected]>
powerpc/pseries: Stop calling printk in rtas_stop_self()
Yaqi Chen <[email protected]>
samples/bpf: Fix broken tracex1 due to kprobe argument change
Du Cheng <[email protected]>
net: sched: tapr: prevent cycle_time == 0 in parse_taprio_schedule
Gustavo A. R. Silva <[email protected]>
ethtool: ioctl: Fix out-of-bounds warning in store_link_ksettings_for_user()
David Ward <[email protected]>
ASoC: rt286: Generalize support for ALC3263 codec
Srikar Dronamraju <[email protected]>
powerpc/smp: Set numa node before updating mask
Gustavo A. R. Silva <[email protected]>
flow_dissector: Fix out-of-bounds warning in __skb_flow_bpf_to_target()
Gustavo A. R. Silva <[email protected]>
sctp: Fix out-of-bounds warning in sctp_process_asconf_param()
Kai Vehmanen <[email protected]>
ALSA: hda/hdmi: fix race in handling acomp ELD notification at resume
Mihai Moldovan <[email protected]>
kconfig: nconf: stop endless search loops
Yonghong Song <[email protected]>
selftests: Set CC to clang in lib.mk if LLVM is set
Anthony Wang <[email protected]>
drm/amd/display: Force vsync flip when reconfiguring MPCC
Suravee Suthikulpanit <[email protected]>
iommu/amd: Remove performance counter pre-initialization test
Paul Menzel <[email protected]>
Revert "iommu/amd: Fix performance counter initialization"
Kuninori Morimoto <[email protected]>
ASoC: rsnd: call rsnd_ssi_master_clk_start() from rsnd_ssi_init()
Miklos Szeredi <[email protected]>
cuse: prevent clone
David Bauer <[email protected]>
mt76: mt76x0: disable GTK offloading
Krzysztof Kozlowski <[email protected]>
pinctrl: samsung: use 'int' for register masks in Exynos
Emmanuel Grumbach <[email protected]>
mac80211: clear the beacon's CRC after channel switch
Bence Csókás <[email protected]>
i2c: Add I2C_AQ_NO_REP_START adapter quirk
Hans de Goede <[email protected]>
ASoC: Intel: bytcr_rt5640: Add quirk for the Chuwi Hi8 tablet
Eric Dumazet <[email protected]>
ip6_vti: proper dev_{hold|put} in ndo_[un]init methods
Archie Pusaka <[email protected]>
Bluetooth: check for zapped sk before connecting
Nikolay Aleksandrov <[email protected]>
net: bridge: when suppression is enabled exclude RARP packets
Tetsuo Handa <[email protected]>
Bluetooth: initialize skb_queue_head at l2cap_chan_create()
Archie Pusaka <[email protected]>
Bluetooth: Set CONF_NOT_COMPLETE as l2cap_chan default
Takashi Sakamoto <[email protected]>
ALSA: bebob: enable to deliver MIDI messages for multiple ports
Tong Zhang <[email protected]>
ALSA: rme9652: don't disable if not enabled
Tong Zhang <[email protected]>
ALSA: hdspm: don't disable if not enabled
Tong Zhang <[email protected]>
ALSA: hdsp: don't disable if not enabled
Wolfram Sang <[email protected]>
i2c: bail out early when RDWR parameters are wrong
Mikhail Durnev <[email protected]>
ASoC: rsnd: core: Check convert rate in rsnd_hw_params
Jonathan McDowell <[email protected]>
net: stmmac: Set FIFO sizes for ipq806x
Hans de Goede <[email protected]>
ASoC: Intel: bytcr_rt5640: Enable jack-detect support on Asus T100TAF
Hoang Le <[email protected]>
tipc: convert dest node's address to network order
Alexander Aring <[email protected]>
fs: dlm: fix debugfs dump
Tony Lindgren <[email protected]>
PM: runtime: Fix unpaired parent child_count for force_resume
Sean Christopherson <[email protected]>
KVM: x86/mmu: Remove the defunct update_pte() paging hook
Jarkko Sakkinen <[email protected]>
tpm, tpm_tis: Reserve locality in tpm_tis_resume()
Jarkko Sakkinen <[email protected]>
tpm, tpm_tis: Extend locality handling to TPM2 in tpm_tis_gen_interrupt()
Zhen Lei <[email protected]>
tpm: fix error return code in tpm2_get_cc_attrs_tbl()
-------------
Diffstat:
Documentation/arm/memory.rst | 7 +-
Makefile | 4 +-
arch/arc/include/asm/page.h | 12 +++
arch/arc/include/asm/pgtable.h | 12 +--
arch/arc/include/uapi/asm/page.h | 1 -
arch/arc/kernel/entry.S | 4 +-
arch/arc/mm/ioremap.c | 5 +-
arch/arc/mm/tlb.c | 2 +-
arch/arm/include/asm/fixmap.h | 2 +-
arch/arm/include/asm/memory.h | 5 ++
arch/arm/include/asm/prom.h | 4 +-
arch/arm/kernel/atags.h | 4 +-
arch/arm/kernel/atags_parse.c | 6 +-
arch/arm/kernel/devtree.c | 6 +-
arch/arm/kernel/head.S | 9 +--
arch/arm/kernel/hw_breakpoint.c | 2 +-
arch/arm/kernel/setup.c | 19 +++--
arch/arm/mm/init.c | 1 -
arch/arm/mm/mmu.c | 20 +++--
arch/arm/mm/pv-fixup-asm.S | 4 +-
arch/ia64/include/asm/module.h | 6 +-
arch/ia64/kernel/module.c | 29 ++++++-
arch/mips/include/asm/div64.h | 55 ++++++++++----
arch/powerpc/kernel/iommu.c | 4 +-
arch/powerpc/kernel/smp.c | 6 +-
arch/powerpc/lib/feature-fixups.c | 35 ++++++++-
arch/powerpc/platforms/pseries/hotplug-cpu.c | 3 -
arch/riscv/kernel/smp.c | 2 +-
arch/x86/include/asm/kvm_host.h | 3 -
arch/x86/kvm/mmu.c | 33 +-------
arch/x86/kvm/x86.c | 2 +-
block/bfq-iosched.c | 3 +-
block/blk-mq-sched.c | 8 +-
block/blk-mq.c | 6 +-
block/kyber-iosched.c | 5 +-
block/mq-deadline.c | 3 +-
drivers/acpi/scan.c | 1 +
drivers/base/power/runtime.c | 10 ++-
drivers/block/nbd.c | 3 +-
drivers/char/tpm/tpm2-cmd.c | 1 +
drivers/char/tpm/tpm_tis_core.c | 22 ++++--
drivers/clk/samsung/clk-exynos7.c | 7 +-
drivers/gpu/drm/amd/display/dc/core/dc.c | 4 +
drivers/gpu/drm/amd/display/dc/dcn20/dcn20_hubp.c | 15 ++--
drivers/gpu/drm/i915/gem/i915_gem_mman.c | 2 +-
drivers/gpu/drm/radeon/radeon.h | 1 +
drivers/gpu/drm/radeon/radeon_atombios.c | 26 +++++--
drivers/gpu/drm/radeon/radeon_pm.c | 8 ++
drivers/gpu/drm/radeon/si_dpm.c | 3 +
drivers/hwmon/occ/common.c | 5 +-
drivers/hwmon/occ/common.h | 2 +-
drivers/i2c/i2c-dev.c | 9 ++-
drivers/iio/gyro/mpu3050-core.c | 13 +++-
drivers/iio/light/tsl2583.c | 8 ++
drivers/iio/proximity/pulsedlight-lidar-lite-v2.c | 1 +
drivers/iommu/amd_iommu_init.c | 49 +-----------
drivers/net/can/m_can/m_can.c | 3 +-
drivers/net/ethernet/broadcom/bnxt/bnxt.c | 19 ++++-
drivers/net/ethernet/cisco/enic/enic_main.c | 7 +-
drivers/net/ethernet/hisilicon/hns3/hns3_enet.c | 12 ++-
.../net/ethernet/hisilicon/hns3/hns3pf/hclge_err.c | 3 +-
.../net/ethernet/hisilicon/hns3/hns3pf/hclge_err.h | 3 +-
.../net/ethernet/hisilicon/hns3/hns3pf/hclge_mbx.c | 2 +-
.../ethernet/hisilicon/hns3/hns3pf/hclge_mdio.c | 2 +
drivers/net/ethernet/intel/i40e/i40e_adminq_cmd.h | 6 +-
drivers/net/ethernet/intel/i40e/i40e_client.c | 1 +
drivers/net/ethernet/intel/i40e/i40e_common.c | 4 +-
drivers/net/ethernet/intel/i40e/i40e_ethtool.c | 7 +-
drivers/net/ethernet/intel/i40e/i40e_type.h | 7 +-
drivers/net/ethernet/intel/iavf/iavf_main.c | 2 -
drivers/net/ethernet/mediatek/mtk_eth_soc.c | 2 +-
drivers/net/ethernet/mediatek/mtk_eth_soc.h | 1 +
.../net/ethernet/stmicro/stmmac/dwmac-ipq806x.c | 2 +
drivers/net/fddi/Kconfig | 15 ++--
drivers/net/wireless/mediatek/mt76/mt76x02_util.c | 4 +
drivers/net/wireless/quantenna/qtnfmac/event.c | 6 +-
drivers/net/wireless/wl3501.h | 47 ++++++------
drivers/net/wireless/wl3501_cs.c | 54 +++++++------
drivers/nvme/host/core.c | 3 +-
drivers/pci/controller/pcie-iproc-msi.c | 2 +-
drivers/pci/endpoint/functions/pci-epf-test.c | 3 +
drivers/pci/probe.c | 1 +
drivers/pinctrl/samsung/pinctrl-exynos.c | 10 +--
drivers/rpmsg/qcom_glink_native.c | 1 +
drivers/rtc/rtc-ds1307.c | 12 ++-
drivers/rtc/rtc-fsl-ftm-alarm.c | 1 +
drivers/thermal/fair_share.c | 4 +
drivers/thermal/of-thermal.c | 7 +-
drivers/usb/class/cdc-wdm.c | 30 ++++++--
drivers/usb/core/hub.c | 6 +-
drivers/usb/dwc2/core.h | 2 +
drivers/usb/dwc2/gadget.c | 3 +-
drivers/usb/dwc3/dwc3-omap.c | 5 ++
drivers/usb/dwc3/dwc3-pci.c | 1 +
drivers/usb/dwc3/gadget.c | 4 +-
drivers/usb/host/fotg210-hcd.c | 4 +-
drivers/usb/host/xhci-ext-caps.h | 5 +-
drivers/usb/host/xhci-pci.c | 4 +-
drivers/usb/host/xhci.c | 6 +-
drivers/usb/typec/tcpm/tcpm.c | 6 +-
fs/ceph/export.c | 4 +-
fs/dlm/debug_fs.c | 1 +
fs/f2fs/inline.c | 3 +-
fs/f2fs/verity.c | 75 ++++++++++++------
fs/fuse/cuse.c | 2 +
fs/hfsplus/extents.c | 7 +-
fs/hugetlbfs/inode.c | 5 ++
fs/iomap/buffered-io.c | 34 ++++++---
fs/nfs/flexfilelayout/flexfilelayout.c | 2 +-
fs/nfs/inode.c | 8 +-
fs/nfs/nfs42proc.c | 21 ++++--
fs/squashfs/file.c | 6 +-
include/linux/elevator.h | 2 +-
include/linux/i2c.h | 2 +
include/linux/iomap.h | 1 +
include/linux/mm.h | 32 ++++++++
include/linux/mm_types.h | 4 +-
include/linux/pm.h | 1 +
include/net/page_pool.h | 12 ++-
include/uapi/linux/netfilter/xt_SECMARK.h | 6 ++
kernel/kexec_file.c | 4 +-
kernel/sched/core.c | 2 +-
kernel/sched/fair.c | 12 ++-
lib/kobject_uevent.c | 9 ++-
lib/nlattr.c | 2 +-
mm/hugetlb.c | 11 ++-
mm/khugepaged.c | 18 ++---
mm/ksm.c | 1 +
mm/migrate.c | 7 ++
mm/shmem.c | 34 ++++-----
net/bluetooth/l2cap_core.c | 4 +
net/bluetooth/l2cap_sock.c | 8 ++
net/bridge/br_arp_nd_proxy.c | 4 +-
net/core/ethtool.c | 2 +-
net/core/flow_dissector.c | 6 +-
net/core/page_pool.c | 6 +-
net/ipv6/ip6_vti.c | 2 +-
net/mac80211/mlme.c | 5 ++
net/netfilter/nf_conntrack_standalone.c | 5 +-
net/netfilter/nfnetlink_osf.c | 2 +
net/netfilter/nft_set_hash.c | 10 ++-
net/netfilter/xt_SECMARK.c | 88 +++++++++++++++++-----
net/sched/sch_taprio.c | 6 ++
net/sctp/sm_make_chunk.c | 2 +-
net/sctp/sm_statefuns.c | 28 +++++--
net/smc/af_smc.c | 4 +-
net/sunrpc/clnt.c | 11 ++-
net/tipc/netlink_compat.c | 2 +-
samples/bpf/tracex1_kern.c | 4 +-
scripts/kconfig/nconf.c | 2 +-
sound/firewire/bebob/bebob_stream.c | 12 +--
sound/pci/hda/patch_hdmi.c | 4 +-
sound/pci/rme9652/hdsp.c | 3 +-
sound/pci/rme9652/hdspm.c | 3 +-
sound/pci/rme9652/rme9652.c | 3 +-
sound/soc/codecs/rt286.c | 23 +++---
sound/soc/intel/boards/bytcr_rt5640.c | 20 +++++
sound/soc/sh/rcar/core.c | 69 ++++++++++++++++-
sound/soc/sh/rcar/ssi.c | 16 ++--
tools/testing/selftests/lib.mk | 4 +
160 files changed, 1035 insertions(+), 502 deletions(-)
From: Zhen Lei <[email protected]>
commit 1df83992d977355177810c2b711afc30546c81ce upstream.
If the total number of commands queried through TPM2_CAP_COMMANDS is
different from that queried through TPM2_CC_GET_CAPABILITY, it indicates
an unknown error. In this case, an appropriate error code -EFAULT should
be returned. However, we currently do not explicitly assign this error
code to 'rc'. As a result, 0 was incorrectly returned.
Cc: [email protected]
Fixes: 58472f5cd4f6("tpm: validate TPM 2.0 commands")
Reported-by: Hulk Robot <[email protected]>
Signed-off-by: Zhen Lei <[email protected]>
Reviewed-by: Jarkko Sakkinen <[email protected]>
Signed-off-by: Jarkko Sakkinen <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/char/tpm/tpm2-cmd.c | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/char/tpm/tpm2-cmd.c
+++ b/drivers/char/tpm/tpm2-cmd.c
@@ -962,6 +962,7 @@ static int tpm2_get_cc_attrs_tbl(struct
if (nr_commands !=
be32_to_cpup((__be32 *)&buf.data[TPM_HEADER_SIZE + 5])) {
+ rc = -EFAULT;
tpm_buf_destroy(&buf);
goto out;
}
From: Jarkko Sakkinen <[email protected]>
commit e630af7dfb450d1c00c30077314acf33032ff9e4 upstream.
The earlier fix (linked) only partially fixed the locality handling bug
in tpm_tis_gen_interrupt(), i.e. only for TPM 1.x.
Extend the locality handling to cover TPM2.
Cc: Hans de Goede <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/linux-integrity/[email protected]/
Fixes: a3fbfae82b4c ("tpm: take TPM chip power gating out of tpm_transmit()")
Reported-by: Lino Sanfilippo <[email protected]>
Signed-off-by: Jarkko Sakkinen <[email protected]>
Tested-by: Lino Sanfilippo <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/char/tpm/tpm_tis_core.c | 10 ++++------
1 file changed, 4 insertions(+), 6 deletions(-)
--- a/drivers/char/tpm/tpm_tis_core.c
+++ b/drivers/char/tpm/tpm_tis_core.c
@@ -620,16 +620,14 @@ static int tpm_tis_gen_interrupt(struct
cap_t cap;
int ret;
- /* TPM 2.0 */
- if (chip->flags & TPM_CHIP_FLAG_TPM2)
- return tpm2_get_tpm_pt(chip, 0x100, &cap2, desc);
-
- /* TPM 1.2 */
ret = request_locality(chip, 0);
if (ret < 0)
return ret;
- ret = tpm1_getcap(chip, TPM_CAP_PROP_TIS_TIMEOUT, &cap, desc, 0);
+ if (chip->flags & TPM_CHIP_FLAG_TPM2)
+ ret = tpm2_get_tpm_pt(chip, 0x100, &cap2, desc);
+ else
+ ret = tpm1_getcap(chip, TPM_CAP_PROP_TIS_TIMEOUT, &cap, desc, 0);
release_locality(chip, 0);
From: Jarkko Sakkinen <[email protected]>
commit 8a2d296aaebadd68d9c1f6908667df1d1c84c051 upstream.
Reserve locality in tpm_tis_resume(), as it could be unsert after waking
up from a sleep state.
Cc: [email protected]
Cc: Lino Sanfilippo <[email protected]>
Reported-by: Hans de Goede <[email protected]>
Fixes: a3fbfae82b4c ("tpm: take TPM chip power gating out of tpm_transmit()")
Signed-off-by: Jarkko Sakkinen <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/char/tpm/tpm_tis_core.c | 12 ++++++++++--
1 file changed, 10 insertions(+), 2 deletions(-)
--- a/drivers/char/tpm/tpm_tis_core.c
+++ b/drivers/char/tpm/tpm_tis_core.c
@@ -1035,12 +1035,20 @@ int tpm_tis_resume(struct device *dev)
if (ret)
return ret;
- /* TPM 1.2 requires self-test on resume. This function actually returns
+ /*
+ * TPM 1.2 requires self-test on resume. This function actually returns
* an error code but for unknown reason it isn't handled.
*/
- if (!(chip->flags & TPM_CHIP_FLAG_TPM2))
+ if (!(chip->flags & TPM_CHIP_FLAG_TPM2)) {
+ ret = request_locality(chip, 0);
+ if (ret < 0)
+ return ret;
+
tpm1_do_selftest(chip);
+ release_locality(chip, 0);
+ }
+
return 0;
}
EXPORT_SYMBOL_GPL(tpm_tis_resume);
From: Sean Christopherson <[email protected]>
commit c5e2184d1544f9e56140791eff1a351bea2e63b9 upstream.
Remove the update_pte() shadow paging logic, which was obsoleted by
commit 4731d4c7a077 ("KVM: MMU: out of sync shadow core"), but never
removed. As pointed out by Yu, KVM never write protects leaf page
tables for the purposes of shadow paging, and instead marks their
associated shadow page as unsync so that the guest can write PTEs at
will.
The update_pte() path, which predates the unsync logic, optimizes COW
scenarios by refreshing leaf SPTEs when they are written, as opposed to
zapping the SPTE, restarting the guest, and installing the new SPTE on
the subsequent fault. Since KVM no longer write-protects leaf page
tables, update_pte() is unreachable and can be dropped.
Reported-by: Yu Zhang <[email protected]>
Signed-off-by: Sean Christopherson <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
(jwang: backport to 5.4 to fix a warning on AMD nested Virtualization)
Signed-off-by: Jack Wang <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/include/asm/kvm_host.h | 3 ---
arch/x86/kvm/mmu.c | 33 ++-------------------------------
arch/x86/kvm/x86.c | 1 -
3 files changed, 2 insertions(+), 35 deletions(-)
--- a/arch/x86/include/asm/kvm_host.h
+++ b/arch/x86/include/asm/kvm_host.h
@@ -391,8 +391,6 @@ struct kvm_mmu {
int (*sync_page)(struct kvm_vcpu *vcpu,
struct kvm_mmu_page *sp);
void (*invlpg)(struct kvm_vcpu *vcpu, gva_t gva, hpa_t root_hpa);
- void (*update_pte)(struct kvm_vcpu *vcpu, struct kvm_mmu_page *sp,
- u64 *spte, const void *pte);
hpa_t root_hpa;
gpa_t root_cr3;
union kvm_mmu_role mmu_role;
@@ -944,7 +942,6 @@ struct kvm_arch {
struct kvm_vm_stat {
ulong mmu_shadow_zapped;
ulong mmu_pte_write;
- ulong mmu_pte_updated;
ulong mmu_pde_zapped;
ulong mmu_flooded;
ulong mmu_recycled;
--- a/arch/x86/kvm/mmu.c
+++ b/arch/x86/kvm/mmu.c
@@ -2243,13 +2243,6 @@ static void nonpaging_invlpg(struct kvm_
{
}
-static void nonpaging_update_pte(struct kvm_vcpu *vcpu,
- struct kvm_mmu_page *sp, u64 *spte,
- const void *pte)
-{
- WARN_ON(1);
-}
-
#define KVM_PAGE_ARRAY_NR 16
struct kvm_mmu_pages {
@@ -4356,7 +4349,6 @@ static void nonpaging_init_context(struc
context->gva_to_gpa = nonpaging_gva_to_gpa;
context->sync_page = nonpaging_sync_page;
context->invlpg = nonpaging_invlpg;
- context->update_pte = nonpaging_update_pte;
context->root_level = 0;
context->shadow_root_level = PT32E_ROOT_LEVEL;
context->direct_map = true;
@@ -4935,7 +4927,6 @@ static void paging64_init_context_common
context->gva_to_gpa = paging64_gva_to_gpa;
context->sync_page = paging64_sync_page;
context->invlpg = paging64_invlpg;
- context->update_pte = paging64_update_pte;
context->shadow_root_level = level;
context->direct_map = false;
}
@@ -4964,7 +4955,6 @@ static void paging32_init_context(struct
context->gva_to_gpa = paging32_gva_to_gpa;
context->sync_page = paging32_sync_page;
context->invlpg = paging32_invlpg;
- context->update_pte = paging32_update_pte;
context->shadow_root_level = PT32E_ROOT_LEVEL;
context->direct_map = false;
}
@@ -5039,7 +5029,6 @@ static void init_kvm_tdp_mmu(struct kvm_
context->page_fault = tdp_page_fault;
context->sync_page = nonpaging_sync_page;
context->invlpg = nonpaging_invlpg;
- context->update_pte = nonpaging_update_pte;
context->shadow_root_level = kvm_x86_ops->get_tdp_level(vcpu);
context->direct_map = true;
context->set_cr3 = kvm_x86_ops->set_tdp_cr3;
@@ -5172,7 +5161,6 @@ void kvm_init_shadow_ept_mmu(struct kvm_
context->gva_to_gpa = ept_gva_to_gpa;
context->sync_page = ept_sync_page;
context->invlpg = ept_invlpg;
- context->update_pte = ept_update_pte;
context->root_level = PT64_ROOT_4LEVEL;
context->direct_map = false;
context->mmu_role.as_u64 = new_role.as_u64;
@@ -5312,19 +5300,6 @@ void kvm_mmu_unload(struct kvm_vcpu *vcp
}
EXPORT_SYMBOL_GPL(kvm_mmu_unload);
-static void mmu_pte_write_new_pte(struct kvm_vcpu *vcpu,
- struct kvm_mmu_page *sp, u64 *spte,
- const void *new)
-{
- if (sp->role.level != PT_PAGE_TABLE_LEVEL) {
- ++vcpu->kvm->stat.mmu_pde_zapped;
- return;
- }
-
- ++vcpu->kvm->stat.mmu_pte_updated;
- vcpu->arch.mmu->update_pte(vcpu, sp, spte, new);
-}
-
static bool need_remote_flush(u64 old, u64 new)
{
if (!is_shadow_present_pte(old))
@@ -5490,14 +5465,10 @@ static void kvm_mmu_pte_write(struct kvm
local_flush = true;
while (npte--) {
- u32 base_role = vcpu->arch.mmu->mmu_role.base.word;
-
entry = *spte;
mmu_page_zap_pte(vcpu->kvm, sp, spte);
- if (gentry &&
- !((sp->role.word ^ base_role)
- & mmu_base_role_mask.word) && rmap_can_add(vcpu))
- mmu_pte_write_new_pte(vcpu, sp, spte, &gentry);
+ if (gentry && sp->role.level != PG_LEVEL_4K)
+ ++vcpu->kvm->stat.mmu_pde_zapped;
if (need_remote_flush(entry, *spte))
remote_flush = true;
++spte;
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -208,7 +208,6 @@ struct kvm_stats_debugfs_item debugfs_en
{ "l1d_flush", VCPU_STAT(l1d_flush) },
{ "mmu_shadow_zapped", VM_STAT(mmu_shadow_zapped) },
{ "mmu_pte_write", VM_STAT(mmu_pte_write) },
- { "mmu_pte_updated", VM_STAT(mmu_pte_updated) },
{ "mmu_pde_zapped", VM_STAT(mmu_pde_zapped) },
{ "mmu_flooded", VM_STAT(mmu_flooded) },
{ "mmu_recycled", VM_STAT(mmu_recycled) },
From: Tony Lindgren <[email protected]>
commit c745253e2a691a40c66790defe85c104a887e14a upstream.
As pm_runtime_need_not_resume() relies also on usage_count, it can return
a different value in pm_runtime_force_suspend() compared to when called in
pm_runtime_force_resume(). Different return values can happen if anything
calls PM runtime functions in between, and causes the parent child_count
to increase on every resume.
So far I've seen the issue only for omapdrm that does complicated things
with PM runtime calls during system suspend for legacy reasons:
omap_atomic_commit_tail() for omapdrm.0
dispc_runtime_get()
wakes up 58000000.dss as it's the dispc parent
dispc_runtime_resume()
rpm_resume() increases parent child_count
dispc_runtime_put() won't idle, PM runtime suspend blocked
pm_runtime_force_suspend() for 58000000.dss, !pm_runtime_need_not_resume()
__update_runtime_status()
system suspended
pm_runtime_force_resume() for 58000000.dss, pm_runtime_need_not_resume()
pm_runtime_enable() only called because of pm_runtime_need_not_resume()
omap_atomic_commit_tail() for omapdrm.0
dispc_runtime_get()
wakes up 58000000.dss as it's the dispc parent
dispc_runtime_resume()
rpm_resume() increases parent child_count
dispc_runtime_put() won't idle, PM runtime suspend blocked
...
rpm_suspend for 58000000.dss but parent child_count is now unbalanced
Let's fix the issue by adding a flag for needs_force_resume and use it in
pm_runtime_force_resume() instead of pm_runtime_need_not_resume().
Additionally omapdrm system suspend could be simplified later on to avoid
lots of unnecessary PM runtime calls and the complexity it adds. The
driver can just use internal functions that are shared between the PM
runtime and system suspend related functions.
Fixes: 4918e1f87c5f ("PM / runtime: Rework pm_runtime_force_suspend/resume()")
Signed-off-by: Tony Lindgren <[email protected]>
Reviewed-by: Ulf Hansson <[email protected]>
Tested-by: Tomi Valkeinen <[email protected]>
Cc: 4.16+ <[email protected]> # 4.16+
Signed-off-by: Rafael J. Wysocki <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/base/power/runtime.c | 10 +++++++---
include/linux/pm.h | 1 +
2 files changed, 8 insertions(+), 3 deletions(-)
--- a/drivers/base/power/runtime.c
+++ b/drivers/base/power/runtime.c
@@ -1610,6 +1610,7 @@ void pm_runtime_init(struct device *dev)
dev->power.request_pending = false;
dev->power.request = RPM_REQ_NONE;
dev->power.deferred_resume = false;
+ dev->power.needs_force_resume = 0;
INIT_WORK(&dev->power.work, pm_runtime_work);
dev->power.timer_expires = 0;
@@ -1777,10 +1778,12 @@ int pm_runtime_force_suspend(struct devi
* its parent, but set its status to RPM_SUSPENDED anyway in case this
* function will be called again for it in the meantime.
*/
- if (pm_runtime_need_not_resume(dev))
+ if (pm_runtime_need_not_resume(dev)) {
pm_runtime_set_suspended(dev);
- else
+ } else {
__update_runtime_status(dev, RPM_SUSPENDED);
+ dev->power.needs_force_resume = 1;
+ }
return 0;
@@ -1807,7 +1810,7 @@ int pm_runtime_force_resume(struct devic
int (*callback)(struct device *);
int ret = 0;
- if (!pm_runtime_status_suspended(dev) || pm_runtime_need_not_resume(dev))
+ if (!pm_runtime_status_suspended(dev) || !dev->power.needs_force_resume)
goto out;
/*
@@ -1826,6 +1829,7 @@ int pm_runtime_force_resume(struct devic
pm_runtime_mark_last_busy(dev);
out:
+ dev->power.needs_force_resume = 0;
pm_runtime_enable(dev);
return ret;
}
--- a/include/linux/pm.h
+++ b/include/linux/pm.h
@@ -608,6 +608,7 @@ struct dev_pm_info {
unsigned int idle_notification:1;
unsigned int request_pending:1;
unsigned int deferred_resume:1;
+ unsigned int needs_force_resume:1;
unsigned int runtime_auto:1;
bool ignore_children:1;
unsigned int no_callbacks:1;
From: Mikhail Durnev <[email protected]>
[ Upstream commit 19c6a63ced5e07e40f3a5255cb1f0fe0d3be7b14 ]
snd_pcm_hw_params_set_rate_near can return incorrect sample rate in
some cases, e.g. when the backend output rate is set to some value higher
than 48000 Hz and the input rate is 8000 Hz. So passing the value returned
by snd_pcm_hw_params_set_rate_near to snd_pcm_hw_params will result in
"FSO/FSI ratio error" and playing no audio at all while the userland
is not properly notified about the issue.
If SRC is unable to convert the requested sample rate to the sample rate
the backend is using, then the requested sample rate should be adjusted in
rsnd_hw_params. The userland will be notified about that change in the
returned hw_params structure.
Signed-off-by: Mikhail Durnev <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/soc/sh/rcar/core.c | 69 +++++++++++++++++++++++++++++++++++++++-
1 file changed, 68 insertions(+), 1 deletion(-)
diff --git a/sound/soc/sh/rcar/core.c b/sound/soc/sh/rcar/core.c
index a6c1cf987e6e..df8d7b53b760 100644
--- a/sound/soc/sh/rcar/core.c
+++ b/sound/soc/sh/rcar/core.c
@@ -1426,8 +1426,75 @@ static int rsnd_hw_params(struct snd_pcm_substream *substream,
}
if (io->converted_chan)
dev_dbg(dev, "convert channels = %d\n", io->converted_chan);
- if (io->converted_rate)
+ if (io->converted_rate) {
+ /*
+ * SRC supports convert rates from params_rate(hw_params)/k_down
+ * to params_rate(hw_params)*k_up, where k_up is always 6, and
+ * k_down depends on number of channels and SRC unit.
+ * So all SRC units can upsample audio up to 6 times regardless
+ * its number of channels. And all SRC units can downsample
+ * 2 channel audio up to 6 times too.
+ */
+ int k_up = 6;
+ int k_down = 6;
+ int channel;
+ struct rsnd_mod *src_mod = rsnd_io_to_mod_src(io);
+
dev_dbg(dev, "convert rate = %d\n", io->converted_rate);
+
+ channel = io->converted_chan ? io->converted_chan :
+ params_channels(hw_params);
+
+ switch (rsnd_mod_id(src_mod)) {
+ /*
+ * SRC0 can downsample 4, 6 and 8 channel audio up to 4 times.
+ * SRC1, SRC3 and SRC4 can downsample 4 channel audio
+ * up to 4 times.
+ * SRC1, SRC3 and SRC4 can downsample 6 and 8 channel audio
+ * no more than twice.
+ */
+ case 1:
+ case 3:
+ case 4:
+ if (channel > 4) {
+ k_down = 2;
+ break;
+ }
+ fallthrough;
+ case 0:
+ if (channel > 2)
+ k_down = 4;
+ break;
+
+ /* Other SRC units do not support more than 2 channels */
+ default:
+ if (channel > 2)
+ return -EINVAL;
+ }
+
+ if (params_rate(hw_params) > io->converted_rate * k_down) {
+ hw_param_interval(hw_params, SNDRV_PCM_HW_PARAM_RATE)->min =
+ io->converted_rate * k_down;
+ hw_param_interval(hw_params, SNDRV_PCM_HW_PARAM_RATE)->max =
+ io->converted_rate * k_down;
+ hw_params->cmask |= SNDRV_PCM_HW_PARAM_RATE;
+ } else if (params_rate(hw_params) * k_up < io->converted_rate) {
+ hw_param_interval(hw_params, SNDRV_PCM_HW_PARAM_RATE)->min =
+ (io->converted_rate + k_up - 1) / k_up;
+ hw_param_interval(hw_params, SNDRV_PCM_HW_PARAM_RATE)->max =
+ (io->converted_rate + k_up - 1) / k_up;
+ hw_params->cmask |= SNDRV_PCM_HW_PARAM_RATE;
+ }
+
+ /*
+ * TBD: Max SRC input and output rates also depend on number
+ * of channels and SRC unit:
+ * SRC1, SRC3 and SRC4 do not support more than 128kHz
+ * for 6 channel and 96kHz for 8 channel audio.
+ * Perhaps this function should return EINVAL if the input or
+ * the output rate exceeds the limitation.
+ */
+ }
}
ret = rsnd_dai_call(hw_params, io, substream, hw_params);
--
2.30.2
From: Tong Zhang <[email protected]>
[ Upstream commit 507cdb9adba006a7798c358456426e1aea3d9c4f ]
hdsp wants to disable a not enabled pci device, which makes kernel
throw a warning. Make sure the device is enabled before calling disable.
[ 1.758292] snd_hdsp 0000:00:03.0: disabling already-disabled device
[ 1.758327] WARNING: CPU: 0 PID: 180 at drivers/pci/pci.c:2146 pci_disable_device+0x91/0xb0
[ 1.766985] Call Trace:
[ 1.767121] snd_hdsp_card_free+0x94/0xf0 [snd_hdsp]
[ 1.767388] release_card_device+0x4b/0x80 [snd]
[ 1.767639] device_release+0x3b/0xa0
[ 1.767838] kobject_put+0x94/0x1b0
[ 1.768027] put_device+0x13/0x20
[ 1.768207] snd_card_free+0x61/0x90 [snd]
[ 1.768430] snd_hdsp_probe+0x524/0x5e0 [snd_hdsp]
Suggested-by: Takashi Iwai <[email protected]>
Signed-off-by: Tong Zhang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/pci/rme9652/hdsp.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/sound/pci/rme9652/hdsp.c b/sound/pci/rme9652/hdsp.c
index 5cbdc9be9c7e..c7b3e76ea2d2 100644
--- a/sound/pci/rme9652/hdsp.c
+++ b/sound/pci/rme9652/hdsp.c
@@ -5326,7 +5326,8 @@ static int snd_hdsp_free(struct hdsp *hdsp)
if (hdsp->port)
pci_release_regions(hdsp->pci);
- pci_disable_device(hdsp->pci);
+ if (pci_is_enabled(hdsp->pci))
+ pci_disable_device(hdsp->pci);
return 0;
}
--
2.30.2
From: Wolfram Sang <[email protected]>
[ Upstream commit 71581562ee36032d2d574a9b23ad4af6d6a64cf7 ]
The buggy parameters currently get caught later, but emit a noisy WARN.
Userspace should not be able to trigger this, so add similar checks much
earlier. Also avoids some unneeded code paths, of course. Apply kernel
coding stlye to a comment while here.
Reported-by: [email protected]
Tested-by: [email protected]
Signed-off-by: Wolfram Sang <[email protected]>
Signed-off-by: Wolfram Sang <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/i2c/i2c-dev.c | 9 +++++++--
1 file changed, 7 insertions(+), 2 deletions(-)
diff --git a/drivers/i2c/i2c-dev.c b/drivers/i2c/i2c-dev.c
index 94beacc41302..a3fec3df11b6 100644
--- a/drivers/i2c/i2c-dev.c
+++ b/drivers/i2c/i2c-dev.c
@@ -440,8 +440,13 @@ static long i2cdev_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
sizeof(rdwr_arg)))
return -EFAULT;
- /* Put an arbitrary limit on the number of messages that can
- * be sent at once */
+ if (!rdwr_arg.msgs || rdwr_arg.nmsgs == 0)
+ return -EINVAL;
+
+ /*
+ * Put an arbitrary limit on the number of messages that can
+ * be sent at once
+ */
if (rdwr_arg.nmsgs > I2C_RDWR_IOCTL_MAX_MSGS)
return -EINVAL;
--
2.30.2
From: Archie Pusaka <[email protected]>
[ Upstream commit 3a9d54b1947ecea8eea9a902c0b7eb58a98add8a ]
Currently l2cap_chan_set_defaults() reset chan->conf_state to zero.
However, there is a flag CONF_NOT_COMPLETE which is set when
creating the l2cap_chan. It is suggested that the flag should be
cleared when l2cap_chan is ready, but when l2cap_chan_set_defaults()
is called, l2cap_chan is not yet ready. Therefore, we must set this
flag as the default.
Example crash call trace:
__dump_stack lib/dump_stack.c:15 [inline]
dump_stack+0xc4/0x118 lib/dump_stack.c:56
panic+0x1c6/0x38b kernel/panic.c:117
__warn+0x170/0x1b9 kernel/panic.c:471
warn_slowpath_fmt+0xc7/0xf8 kernel/panic.c:494
debug_print_object+0x175/0x193 lib/debugobjects.c:260
debug_object_assert_init+0x171/0x1bf lib/debugobjects.c:614
debug_timer_assert_init kernel/time/timer.c:629 [inline]
debug_assert_init kernel/time/timer.c:677 [inline]
del_timer+0x7c/0x179 kernel/time/timer.c:1034
try_to_grab_pending+0x81/0x2e5 kernel/workqueue.c:1230
cancel_delayed_work+0x7c/0x1c4 kernel/workqueue.c:2929
l2cap_clear_timer+0x1e/0x41 include/net/bluetooth/l2cap.h:834
l2cap_chan_del+0x2d8/0x37e net/bluetooth/l2cap_core.c:640
l2cap_chan_close+0x532/0x5d8 net/bluetooth/l2cap_core.c:756
l2cap_sock_shutdown+0x806/0x969 net/bluetooth/l2cap_sock.c:1174
l2cap_sock_release+0x64/0x14d net/bluetooth/l2cap_sock.c:1217
__sock_release+0xda/0x217 net/socket.c:580
sock_close+0x1b/0x1f net/socket.c:1039
__fput+0x322/0x55c fs/file_table.c:208
____fput+0x17/0x19 fs/file_table.c:244
task_work_run+0x19b/0x1d3 kernel/task_work.c:115
exit_task_work include/linux/task_work.h:21 [inline]
do_exit+0xe4c/0x204a kernel/exit.c:766
do_group_exit+0x291/0x291 kernel/exit.c:891
get_signal+0x749/0x1093 kernel/signal.c:2396
do_signal+0xa5/0xcdb arch/x86/kernel/signal.c:737
exit_to_usermode_loop arch/x86/entry/common.c:243 [inline]
prepare_exit_to_usermode+0xed/0x235 arch/x86/entry/common.c:277
syscall_return_slowpath+0x3a7/0x3b3 arch/x86/entry/common.c:348
int_ret_from_sys_call+0x25/0xa3
Signed-off-by: Archie Pusaka <[email protected]>
Reported-by: [email protected]
Reviewed-by: Alain Michaud <[email protected]>
Reviewed-by: Abhishek Pandit-Subedi <[email protected]>
Reviewed-by: Guenter Roeck <[email protected]>
Signed-off-by: Marcel Holtmann <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/bluetooth/l2cap_core.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/net/bluetooth/l2cap_core.c b/net/bluetooth/l2cap_core.c
index 3499bace25ec..f5039700d927 100644
--- a/net/bluetooth/l2cap_core.c
+++ b/net/bluetooth/l2cap_core.c
@@ -515,7 +515,9 @@ void l2cap_chan_set_defaults(struct l2cap_chan *chan)
chan->flush_to = L2CAP_DEFAULT_FLUSH_TO;
chan->retrans_timeout = L2CAP_DEFAULT_RETRANS_TO;
chan->monitor_timeout = L2CAP_DEFAULT_MONITOR_TO;
+
chan->conf_state = 0;
+ set_bit(CONF_NOT_COMPLETE, &chan->conf_state);
set_bit(FLAG_FORCE_ACTIVE, &chan->flags);
}
--
2.30.2
From: Nikolay Aleksandrov <[email protected]>
[ Upstream commit 0353b4a96b7a9f60fe20d1b3ebd4931a4085f91c ]
Recently we had an interop issue where RARP packets got suppressed with
bridge neigh suppression enabled, but the check in the code was meant to
suppress GARP. Exclude RARP packets from it which would allow some VMWare
setups to work, to quote the report:
"Those RARP packets usually get generated by vMware to notify physical
switches when vMotion occurs. vMware may use random sip/tip or just use
sip=tip=0. So the RARP packet sometimes get properly flooded by the vtep
and other times get dropped by the logic"
Reported-by: Amer Abdalamer <[email protected]>
Signed-off-by: Nikolay Aleksandrov <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/bridge/br_arp_nd_proxy.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/net/bridge/br_arp_nd_proxy.c b/net/bridge/br_arp_nd_proxy.c
index b18cdf03edb3..c4e0f4777df5 100644
--- a/net/bridge/br_arp_nd_proxy.c
+++ b/net/bridge/br_arp_nd_proxy.c
@@ -155,7 +155,9 @@ void br_do_proxy_suppress_arp(struct sk_buff *skb, struct net_bridge *br,
if (br_opt_get(br, BROPT_NEIGH_SUPPRESS_ENABLED)) {
if (p && (p->flags & BR_NEIGH_SUPPRESS))
return;
- if (ipv4_is_zeronet(sip) || sip == tip) {
+ if (parp->ar_op != htons(ARPOP_RREQUEST) &&
+ parp->ar_op != htons(ARPOP_RREPLY) &&
+ (ipv4_is_zeronet(sip) || sip == tip)) {
/* prevent flooding to neigh suppress ports */
BR_INPUT_SKB_CB(skb)->proxyarp_replied = 1;
return;
--
2.30.2
From: Eric Dumazet <[email protected]>
[ Upstream commit 40cb881b5aaa0b69a7d93dec8440d5c62dae299f ]
After adopting CONFIG_PCPU_DEV_REFCNT=n option, syzbot was able to trigger
a warning [1]
Issue here is that:
- all dev_put() should be paired with a corresponding prior dev_hold().
- A driver doing a dev_put() in its ndo_uninit() MUST also
do a dev_hold() in its ndo_init(), only when ndo_init()
is returning 0.
Otherwise, register_netdevice() would call ndo_uninit()
in its error path and release a refcount too soon.
Therefore, we need to move dev_hold() call from
vti6_tnl_create2() to vti6_dev_init_gen()
[1]
WARNING: CPU: 0 PID: 15951 at lib/refcount.c:31 refcount_warn_saturate+0xbf/0x1e0 lib/refcount.c:31
Modules linked in:
CPU: 0 PID: 15951 Comm: syz-executor.3 Not tainted 5.12.0-rc4-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:refcount_warn_saturate+0xbf/0x1e0 lib/refcount.c:31
Code: 1d 6a 5a e8 09 31 ff 89 de e8 8d 1a ab fd 84 db 75 e0 e8 d4 13 ab fd 48 c7 c7 a0 e1 c1 89 c6 05 4a 5a e8 09 01 e8 2e 36 fb 04 <0f> 0b eb c4 e8 b8 13 ab fd 0f b6 1d 39 5a e8 09 31 ff 89 de e8 58
RSP: 0018:ffffc90001eaef28 EFLAGS: 00010282
RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000
RDX: 0000000000040000 RSI: ffffffff815c51f5 RDI: fffff520003d5dd7
RBP: 0000000000000004 R08: 0000000000000000 R09: 0000000000000000
R10: ffffffff815bdf8e R11: 0000000000000000 R12: ffff88801bb1c568
R13: ffff88801f69e800 R14: 00000000ffffffff R15: ffff888050889d40
FS: 00007fc79314e700(0000) GS:ffff8880b9c00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f1c1ff47108 CR3: 0000000020fd5000 CR4: 00000000001506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
__refcount_dec include/linux/refcount.h:344 [inline]
refcount_dec include/linux/refcount.h:359 [inline]
dev_put include/linux/netdevice.h:4135 [inline]
vti6_dev_uninit+0x31a/0x360 net/ipv6/ip6_vti.c:297
register_netdevice+0xadf/0x1500 net/core/dev.c:10308
vti6_tnl_create2+0x1b5/0x400 net/ipv6/ip6_vti.c:190
vti6_newlink+0x9d/0xd0 net/ipv6/ip6_vti.c:1020
__rtnl_newlink+0x1062/0x1710 net/core/rtnetlink.c:3443
rtnl_newlink+0x64/0xa0 net/core/rtnetlink.c:3491
rtnetlink_rcv_msg+0x44e/0xad0 net/core/rtnetlink.c:5553
netlink_rcv_skb+0x153/0x420 net/netlink/af_netlink.c:2502
netlink_unicast_kernel net/netlink/af_netlink.c:1312 [inline]
netlink_unicast+0x533/0x7d0 net/netlink/af_netlink.c:1338
netlink_sendmsg+0x856/0xd90 net/netlink/af_netlink.c:1927
sock_sendmsg_nosec net/socket.c:654 [inline]
sock_sendmsg+0xcf/0x120 net/socket.c:674
____sys_sendmsg+0x331/0x810 net/socket.c:2350
___sys_sendmsg+0xf3/0x170 net/socket.c:2404
__sys_sendmmsg+0x195/0x470 net/socket.c:2490
__do_sys_sendmmsg net/socket.c:2519 [inline]
__se_sys_sendmmsg net/socket.c:2516 [inline]
__x64_sys_sendmmsg+0x99/0x100 net/socket.c:2516
Signed-off-by: Eric Dumazet <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/ipv6/ip6_vti.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/net/ipv6/ip6_vti.c b/net/ipv6/ip6_vti.c
index cc6180e08a4f..01ddb0f70c57 100644
--- a/net/ipv6/ip6_vti.c
+++ b/net/ipv6/ip6_vti.c
@@ -192,7 +192,6 @@ static int vti6_tnl_create2(struct net_device *dev)
strcpy(t->parms.name, dev->name);
- dev_hold(dev);
vti6_tnl_link(ip6n, t);
return 0;
@@ -921,6 +920,7 @@ static inline int vti6_dev_init_gen(struct net_device *dev)
dev->tstats = netdev_alloc_pcpu_stats(struct pcpu_sw_netstats);
if (!dev->tstats)
return -ENOMEM;
+ dev_hold(dev);
return 0;
}
--
2.30.2
From: Bence Csókás <[email protected]>
[ Upstream commit aca01415e076aa96cca0f801f4420ee5c10c660d ]
This quirk signifies that the adapter cannot do a repeated
START, it always issues a STOP condition after transfers.
Suggested-by: Wolfram Sang <[email protected]>
Signed-off-by: Bence Csókás <[email protected]>
Signed-off-by: Wolfram Sang <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
include/linux/i2c.h | 2 ++
1 file changed, 2 insertions(+)
diff --git a/include/linux/i2c.h b/include/linux/i2c.h
index 1361637c369d..af2b799d7a66 100644
--- a/include/linux/i2c.h
+++ b/include/linux/i2c.h
@@ -677,6 +677,8 @@ struct i2c_adapter_quirks {
#define I2C_AQ_NO_ZERO_LEN_READ BIT(5)
#define I2C_AQ_NO_ZERO_LEN_WRITE BIT(6)
#define I2C_AQ_NO_ZERO_LEN (I2C_AQ_NO_ZERO_LEN_READ | I2C_AQ_NO_ZERO_LEN_WRITE)
+/* adapter cannot do repeated START */
+#define I2C_AQ_NO_REP_START BIT(7)
/*
* i2c_adapter is the structure used to identify a physical i2c bus along
--
2.30.2
From: Archie Pusaka <[email protected]>
[ Upstream commit 3af70b39fa2d415dc86c370e5b24ddb9fdacbd6f ]
There is a possibility of receiving a zapped sock on
l2cap_sock_connect(). This could lead to interesting crashes, one
such case is tearing down an already tore l2cap_sock as is happened
with this call trace:
__dump_stack lib/dump_stack.c:15 [inline]
dump_stack+0xc4/0x118 lib/dump_stack.c:56
register_lock_class kernel/locking/lockdep.c:792 [inline]
register_lock_class+0x239/0x6f6 kernel/locking/lockdep.c:742
__lock_acquire+0x209/0x1e27 kernel/locking/lockdep.c:3105
lock_acquire+0x29c/0x2fb kernel/locking/lockdep.c:3599
__raw_spin_lock_bh include/linux/spinlock_api_smp.h:137 [inline]
_raw_spin_lock_bh+0x38/0x47 kernel/locking/spinlock.c:175
spin_lock_bh include/linux/spinlock.h:307 [inline]
lock_sock_nested+0x44/0xfa net/core/sock.c:2518
l2cap_sock_teardown_cb+0x88/0x2fb net/bluetooth/l2cap_sock.c:1345
l2cap_chan_del+0xa3/0x383 net/bluetooth/l2cap_core.c:598
l2cap_chan_close+0x537/0x5dd net/bluetooth/l2cap_core.c:756
l2cap_chan_timeout+0x104/0x17e net/bluetooth/l2cap_core.c:429
process_one_work+0x7e3/0xcb0 kernel/workqueue.c:2064
worker_thread+0x5a5/0x773 kernel/workqueue.c:2196
kthread+0x291/0x2a6 kernel/kthread.c:211
ret_from_fork+0x4e/0x80 arch/x86/entry/entry_64.S:604
Signed-off-by: Archie Pusaka <[email protected]>
Reported-by: [email protected]
Reviewed-by: Alain Michaud <[email protected]>
Reviewed-by: Abhishek Pandit-Subedi <[email protected]>
Reviewed-by: Guenter Roeck <[email protected]>
Signed-off-by: Marcel Holtmann <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/bluetooth/l2cap_sock.c | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/net/bluetooth/l2cap_sock.c b/net/bluetooth/l2cap_sock.c
index 8648c5211ebe..e693fee08623 100644
--- a/net/bluetooth/l2cap_sock.c
+++ b/net/bluetooth/l2cap_sock.c
@@ -179,9 +179,17 @@ static int l2cap_sock_connect(struct socket *sock, struct sockaddr *addr,
struct l2cap_chan *chan = l2cap_pi(sk)->chan;
struct sockaddr_l2 la;
int len, err = 0;
+ bool zapped;
BT_DBG("sk %p", sk);
+ lock_sock(sk);
+ zapped = sock_flag(sk, SOCK_ZAPPED);
+ release_sock(sk);
+
+ if (zapped)
+ return -EINVAL;
+
if (!addr || alen < offsetofend(struct sockaddr, sa_family) ||
addr->sa_family != AF_BLUETOOTH)
return -EINVAL;
--
2.30.2
From: Hans de Goede <[email protected]>
[ Upstream commit 875c40eadf6ac6644c0f71842a4f30dd9968d281 ]
The Chuwi Hi8 tablet is using an analog mic on IN1 and has its
jack-detect connected to JD2_IN4N, instead of using the default
IN3 for its internal mic and JD1_IN4P for jack-detect.
It also only has 1 speaker.
Add a quirk applying the correct settings for this configuration.
Signed-off-by: Hans de Goede <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/soc/intel/boards/bytcr_rt5640.c | 17 +++++++++++++++++
1 file changed, 17 insertions(+)
diff --git a/sound/soc/intel/boards/bytcr_rt5640.c b/sound/soc/intel/boards/bytcr_rt5640.c
index 006cf1e8b602..46a81d4f0b2d 100644
--- a/sound/soc/intel/boards/bytcr_rt5640.c
+++ b/sound/soc/intel/boards/bytcr_rt5640.c
@@ -512,6 +512,23 @@ static const struct dmi_system_id byt_rt5640_quirk_table[] = {
BYT_RT5640_SSP0_AIF1 |
BYT_RT5640_MCLK_EN),
},
+ {
+ /* Chuwi Hi8 (CWI509) */
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "Hampoo"),
+ DMI_MATCH(DMI_BOARD_NAME, "BYT-PA03C"),
+ DMI_MATCH(DMI_SYS_VENDOR, "ilife"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "S806"),
+ },
+ .driver_data = (void *)(BYT_RT5640_IN1_MAP |
+ BYT_RT5640_JD_SRC_JD2_IN4N |
+ BYT_RT5640_OVCD_TH_2000UA |
+ BYT_RT5640_OVCD_SF_0P75 |
+ BYT_RT5640_MONO_SPEAKER |
+ BYT_RT5640_DIFF_MIC |
+ BYT_RT5640_SSP0_AIF1 |
+ BYT_RT5640_MCLK_EN),
+ },
{
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "Circuitco"),
--
2.30.2
From: Krzysztof Kozlowski <[email protected]>
[ Upstream commit fa0c10a5f3a49130dd11281aa27e7e1c8654abc7 ]
The Special Function Registers on all Exynos SoC, including ARM64, are
32-bit wide, so entire driver uses matching functions like readl() or
writel(). On 64-bit ARM using unsigned long for register masks:
1. makes little sense as immediately after bitwise operation it will be
cast to 32-bit value when calling writel(),
2. is actually error-prone because it might promote other operands to
64-bit.
Addresses-Coverity: Unintentional integer overflow
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Reviewed-by: Sylwester Nawrocki <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Linus Walleij <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/pinctrl/samsung/pinctrl-exynos.c | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/drivers/pinctrl/samsung/pinctrl-exynos.c b/drivers/pinctrl/samsung/pinctrl-exynos.c
index 84501c785473..1cf31fe2674d 100644
--- a/drivers/pinctrl/samsung/pinctrl-exynos.c
+++ b/drivers/pinctrl/samsung/pinctrl-exynos.c
@@ -55,7 +55,7 @@ static void exynos_irq_mask(struct irq_data *irqd)
struct exynos_irq_chip *our_chip = to_exynos_irq_chip(chip);
struct samsung_pin_bank *bank = irq_data_get_irq_chip_data(irqd);
unsigned long reg_mask = our_chip->eint_mask + bank->eint_offset;
- unsigned long mask;
+ unsigned int mask;
unsigned long flags;
spin_lock_irqsave(&bank->slock, flags);
@@ -83,7 +83,7 @@ static void exynos_irq_unmask(struct irq_data *irqd)
struct exynos_irq_chip *our_chip = to_exynos_irq_chip(chip);
struct samsung_pin_bank *bank = irq_data_get_irq_chip_data(irqd);
unsigned long reg_mask = our_chip->eint_mask + bank->eint_offset;
- unsigned long mask;
+ unsigned int mask;
unsigned long flags;
/*
@@ -474,7 +474,7 @@ static void exynos_irq_eint0_15(struct irq_desc *desc)
chained_irq_exit(chip, desc);
}
-static inline void exynos_irq_demux_eint(unsigned long pend,
+static inline void exynos_irq_demux_eint(unsigned int pend,
struct irq_domain *domain)
{
unsigned int irq;
@@ -491,8 +491,8 @@ static void exynos_irq_demux_eint16_31(struct irq_desc *desc)
{
struct irq_chip *chip = irq_desc_get_chip(desc);
struct exynos_muxed_weint_data *eintd = irq_desc_get_handler_data(desc);
- unsigned long pend;
- unsigned long mask;
+ unsigned int pend;
+ unsigned int mask;
int i;
chained_irq_enter(chip, desc);
--
2.30.2
From: Emmanuel Grumbach <[email protected]>
[ Upstream commit d6843d1ee283137723b4a8c76244607ce6db1951 ]
After channel switch, we should consider any beacon with a
CSA IE as a new switch. If the CSA IE is a leftover from
before the switch that the AP forgot to remove, we'll get
a CSA-to-Self.
This caused issues in iwlwifi where the firmware saw a beacon
with a CSA-to-Self with mode = 1 on the new channel after a
switch. The firmware considered this a new switch and closed
its queues. Since the beacon didn't change between before and
after the switch, we wouldn't handle it (the CRC is the same)
and we wouldn't let the firmware open its queues again or
disconnect if the CSA IE stays for too long.
Clear the CRC valid state after we switch to make sure that
we handle the beacon and handle the CSA IE as required.
Signed-off-by: Emmanuel Grumbach <[email protected]>
Link: https://lore.kernel.org/r/20210408143124.b9e68aa98304.I465afb55ca2c7d59f7bf610c6046a1fd732b4c28@changeid
Signed-off-by: Johannes Berg <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/mac80211/mlme.c | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c
index 17a3a1c938be..44fd922cc32a 100644
--- a/net/mac80211/mlme.c
+++ b/net/mac80211/mlme.c
@@ -1215,6 +1215,11 @@ static void ieee80211_chswitch_post_beacon(struct ieee80211_sub_if_data *sdata)
sdata->vif.csa_active = false;
ifmgd->csa_waiting_bcn = false;
+ /*
+ * If the CSA IE is still present on the beacon after the switch,
+ * we need to consider it as a new CSA (possibly to self).
+ */
+ ifmgd->beacon_crc_valid = false;
ret = drv_post_channel_switch(sdata);
if (ret) {
--
2.30.2
From: Hoang Le <[email protected]>
[ Upstream commit 1980d37565061ab44bdc2f9e4da477d3b9752e81 ]
(struct tipc_link_info)->dest is in network order (__be32), so we must
convert the value to network order before assigning. The problem detected
by sparse:
net/tipc/netlink_compat.c:699:24: warning: incorrect type in assignment (different base types)
net/tipc/netlink_compat.c:699:24: expected restricted __be32 [usertype] dest
net/tipc/netlink_compat.c:699:24: got int
Acked-by: Jon Maloy <[email protected]>
Signed-off-by: Hoang Le <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/tipc/netlink_compat.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/net/tipc/netlink_compat.c b/net/tipc/netlink_compat.c
index 11be9a84f8de..561ea834f732 100644
--- a/net/tipc/netlink_compat.c
+++ b/net/tipc/netlink_compat.c
@@ -673,7 +673,7 @@ static int tipc_nl_compat_link_dump(struct tipc_nl_compat_msg *msg,
if (err)
return err;
- link_info.dest = nla_get_flag(link[TIPC_NLA_LINK_DEST]);
+ link_info.dest = htonl(nla_get_flag(link[TIPC_NLA_LINK_DEST]));
link_info.up = htonl(nla_get_flag(link[TIPC_NLA_LINK_UP]));
nla_strlcpy(link_info.str, link[TIPC_NLA_LINK_NAME],
TIPC_MAX_LINK_NAME);
--
2.30.2
From: Tetsuo Handa <[email protected]>
[ Upstream commit be8597239379f0f53c9710dd6ab551bbf535bec6 ]
syzbot is hitting "INFO: trying to register non-static key." message [1],
for "struct l2cap_chan"->tx_q.lock spinlock is not yet initialized when
l2cap_chan_del() is called due to e.g. timeout.
Since "struct l2cap_chan"->lock mutex is initialized at l2cap_chan_create()
immediately after "struct l2cap_chan" is allocated using kzalloc(), let's
as well initialize "struct l2cap_chan"->{tx_q,srej_q}.lock spinlocks there.
[1] https://syzkaller.appspot.com/bug?extid=fadfba6a911f6bf71842
Reported-and-tested-by: syzbot <[email protected]>
Signed-off-by: Tetsuo Handa <[email protected]>
Signed-off-by: Marcel Holtmann <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/bluetooth/l2cap_core.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/net/bluetooth/l2cap_core.c b/net/bluetooth/l2cap_core.c
index f5039700d927..959a16b13303 100644
--- a/net/bluetooth/l2cap_core.c
+++ b/net/bluetooth/l2cap_core.c
@@ -450,6 +450,8 @@ struct l2cap_chan *l2cap_chan_create(void)
if (!chan)
return NULL;
+ skb_queue_head_init(&chan->tx_q);
+ skb_queue_head_init(&chan->srej_q);
mutex_init(&chan->lock);
/* Set default lock nesting level */
--
2.30.2
From: Tong Zhang <[email protected]>
[ Upstream commit f57a741874bb6995089020e97a1dcdf9b165dcbe ]
rme9652 wants to disable a not enabled pci device, which makes kernel
throw a warning. Make sure the device is enabled before calling disable.
[ 1.751595] snd_rme9652 0000:00:03.0: disabling already-disabled device
[ 1.751605] WARNING: CPU: 0 PID: 174 at drivers/pci/pci.c:2146 pci_disable_device+0x91/0xb0
[ 1.759968] Call Trace:
[ 1.760145] snd_rme9652_card_free+0x76/0xa0 [snd_rme9652]
[ 1.760434] release_card_device+0x4b/0x80 [snd]
[ 1.760679] device_release+0x3b/0xa0
[ 1.760874] kobject_put+0x94/0x1b0
[ 1.761059] put_device+0x13/0x20
[ 1.761235] snd_card_free+0x61/0x90 [snd]
[ 1.761454] snd_rme9652_probe+0x3be/0x700 [snd_rme9652]
Suggested-by: Takashi Iwai <[email protected]>
Signed-off-by: Tong Zhang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/pci/rme9652/rme9652.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/sound/pci/rme9652/rme9652.c b/sound/pci/rme9652/rme9652.c
index 4c851f8dcaf8..73ad6e74aac9 100644
--- a/sound/pci/rme9652/rme9652.c
+++ b/sound/pci/rme9652/rme9652.c
@@ -1745,7 +1745,8 @@ static int snd_rme9652_free(struct snd_rme9652 *rme9652)
if (rme9652->port)
pci_release_regions(rme9652->pci);
- pci_disable_device(rme9652->pci);
+ if (pci_is_enabled(rme9652->pci))
+ pci_disable_device(rme9652->pci);
return 0;
}
--
2.30.2
From: Takashi Sakamoto <[email protected]>
[ Upstream commit d2b6f15bc18ac8fbce25398290774c21f5b2cd44 ]
Current implementation of bebob driver doesn't correctly handle the case
that the device has multiple MIDI ports. The cause is the number of MIDI
conformant data channels is passed to AM824 data block processing layer.
This commit fixes the bug.
Signed-off-by: Takashi Sakamoto <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/firewire/bebob/bebob_stream.c | 12 +++++++-----
1 file changed, 7 insertions(+), 5 deletions(-)
diff --git a/sound/firewire/bebob/bebob_stream.c b/sound/firewire/bebob/bebob_stream.c
index ce07ea0d4e71..3935e90c8e8f 100644
--- a/sound/firewire/bebob/bebob_stream.c
+++ b/sound/firewire/bebob/bebob_stream.c
@@ -534,20 +534,22 @@ int snd_bebob_stream_init_duplex(struct snd_bebob *bebob)
static int keep_resources(struct snd_bebob *bebob, struct amdtp_stream *stream,
unsigned int rate, unsigned int index)
{
- struct snd_bebob_stream_formation *formation;
+ unsigned int pcm_channels;
+ unsigned int midi_ports;
struct cmp_connection *conn;
int err;
if (stream == &bebob->tx_stream) {
- formation = bebob->tx_stream_formations + index;
+ pcm_channels = bebob->tx_stream_formations[index].pcm;
+ midi_ports = bebob->midi_input_ports;
conn = &bebob->out_conn;
} else {
- formation = bebob->rx_stream_formations + index;
+ pcm_channels = bebob->rx_stream_formations[index].pcm;
+ midi_ports = bebob->midi_output_ports;
conn = &bebob->in_conn;
}
- err = amdtp_am824_set_parameters(stream, rate, formation->pcm,
- formation->midi, false);
+ err = amdtp_am824_set_parameters(stream, rate, pcm_channels, midi_ports, false);
if (err < 0)
return err;
--
2.30.2
From: Tong Zhang <[email protected]>
[ Upstream commit 790f5719b85e12e10c41753b864e74249585ed08 ]
hdspm wants to disable a not enabled pci device, which makes kernel
throw a warning. Make sure the device is enabled before calling disable.
[ 1.786391] snd_hdspm 0000:00:03.0: disabling already-disabled device
[ 1.786400] WARNING: CPU: 0 PID: 182 at drivers/pci/pci.c:2146 pci_disable_device+0x91/0xb0
[ 1.795181] Call Trace:
[ 1.795320] snd_hdspm_card_free+0x58/0xa0 [snd_hdspm]
[ 1.795595] release_card_device+0x4b/0x80 [snd]
[ 1.795860] device_release+0x3b/0xa0
[ 1.796072] kobject_put+0x94/0x1b0
[ 1.796260] put_device+0x13/0x20
[ 1.796438] snd_card_free+0x61/0x90 [snd]
[ 1.796659] snd_hdspm_probe+0x97b/0x1440 [snd_hdspm]
Suggested-by: Takashi Iwai <[email protected]>
Signed-off-by: Tong Zhang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/pci/rme9652/hdspm.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/sound/pci/rme9652/hdspm.c b/sound/pci/rme9652/hdspm.c
index 81a6f4b2bd3c..e34f07c9ff47 100644
--- a/sound/pci/rme9652/hdspm.c
+++ b/sound/pci/rme9652/hdspm.c
@@ -6889,7 +6889,8 @@ static int snd_hdspm_free(struct hdspm * hdspm)
if (hdspm->port)
pci_release_regions(hdspm->pci);
- pci_disable_device(hdspm->pci);
+ if (pci_is_enabled(hdspm->pci))
+ pci_disable_device(hdspm->pci);
return 0;
}
--
2.30.2
From: Hans de Goede <[email protected]>
[ Upstream commit b7c7203a1f751348f35fc4bcb157572d303f7573 ]
The Asus T100TAF uses the same jack-detect settings as the T100TA,
this has been confirmed on actual hardware.
Add these settings to the T100TAF quirks to enable jack-detect support
on the T100TAF.
Signed-off-by: Hans de Goede <[email protected]>
Acked-by: Pierre-Louis Bossart <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/soc/intel/boards/bytcr_rt5640.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/sound/soc/intel/boards/bytcr_rt5640.c b/sound/soc/intel/boards/bytcr_rt5640.c
index cfd307717473..006cf1e8b602 100644
--- a/sound/soc/intel/boards/bytcr_rt5640.c
+++ b/sound/soc/intel/boards/bytcr_rt5640.c
@@ -476,6 +476,9 @@ static const struct dmi_system_id byt_rt5640_quirk_table[] = {
DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "T100TAF"),
},
.driver_data = (void *)(BYT_RT5640_IN1_MAP |
+ BYT_RT5640_JD_SRC_JD2_IN4N |
+ BYT_RT5640_OVCD_TH_2000UA |
+ BYT_RT5640_OVCD_SF_0P75 |
BYT_RT5640_MONO_SPEAKER |
BYT_RT5640_DIFF_MIC |
BYT_RT5640_SSP0_AIF2 |
--
2.30.2
From: David Bauer <[email protected]>
[ Upstream commit 4b36cc6b390f18dbc59a45fb4141f90d7dfe2b23 ]
When operating two VAP on a MT7610 with encryption (PSK2, SAE, OWE),
only the first one to be created will transmit properly encrypteded
frames.
All subsequently created VAPs will sent out frames with the payload left
unencrypted, breaking multicast traffic (ICMP6 NDP) and potentially
disclosing information to a third party.
Disable GTK offloading and encrypt these frames in software to
circumvent this issue. THis only seems to be necessary on MT7610 chips,
as MT7612 is not affected from our testing.
Signed-off-by: David Bauer <[email protected]>
Signed-off-by: Felix Fietkau <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/mediatek/mt76/mt76x02_util.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/drivers/net/wireless/mediatek/mt76/mt76x02_util.c b/drivers/net/wireless/mediatek/mt76/mt76x02_util.c
index de0d6f21c621..075871f52bad 100644
--- a/drivers/net/wireless/mediatek/mt76/mt76x02_util.c
+++ b/drivers/net/wireless/mediatek/mt76/mt76x02_util.c
@@ -450,6 +450,10 @@ int mt76x02_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
!(key->flags & IEEE80211_KEY_FLAG_PAIRWISE))
return -EOPNOTSUPP;
+ /* MT76x0 GTK offloading does not work with more than one VIF */
+ if (is_mt76x0(dev) && !(key->flags & IEEE80211_KEY_FLAG_PAIRWISE))
+ return -EOPNOTSUPP;
+
msta = sta ? (struct mt76x02_sta *)sta->drv_priv : NULL;
wcid = msta ? &msta->wcid : &mvif->group_wcid;
--
2.30.2
From: Miklos Szeredi <[email protected]>
[ Upstream commit 8217673d07256b22881127bf50dce874d0e51653 ]
For cloned connections cuse_channel_release() will be called more than
once, resulting in use after free.
Prevent device cloning for CUSE, which does not make sense at this point,
and highly unlikely to be used in real life.
Signed-off-by: Miklos Szeredi <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/fuse/cuse.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/fs/fuse/cuse.c b/fs/fuse/cuse.c
index 00015d851382..e51b7019e887 100644
--- a/fs/fuse/cuse.c
+++ b/fs/fuse/cuse.c
@@ -624,6 +624,8 @@ static int __init cuse_init(void)
cuse_channel_fops.owner = THIS_MODULE;
cuse_channel_fops.open = cuse_channel_open;
cuse_channel_fops.release = cuse_channel_release;
+ /* CUSE is not prepared for FUSE_DEV_IOC_CLONE */
+ cuse_channel_fops.unlocked_ioctl = NULL;
cuse_class = class_create(THIS_MODULE, "cuse");
if (IS_ERR(cuse_class))
--
2.30.2
From: Kuninori Morimoto <[email protected]>
[ Upstream commit a122a116fc6d8fcf2f202dcd185173a54268f239 ]
Current rsnd needs to call .prepare (P) for clock settings,
.trigger for playback start (S) and stop (E).
It should be called as below from SSI point of view.
P -> S -> E -> P -> S -> E -> ...
But, if you used MIXer, below case might happen
(2)
1: P -> S ---> E -> ...
2: P ----> S -> ...
(1) (3)
P(1) setups clock, but E(2) resets it. and starts playback (3).
In such case, it will reports "SSI parent/child should use same rate".
rsnd_ssi_master_clk_start() which is the main function at (P)
was called from rsnd_ssi_init() (= S) before,
but was moved by below patch to rsnd_soc_dai_prepare() (= P) to avoid
using clk_get_rate() which shouldn't be used under atomic context.
commit 4d230d1271064 ("ASoC: rsnd: fixup not to call clk_get/set
under non-atomic")
Because of above patch, rsnd_ssi_master_clk_start() is now called at (P)
which is for non atomic context. But (P) is assuming that spin lock is
*not* used.
One issue now is rsnd_ssi_master_clk_start() is checking ssi->xxx
which should be protected by spin lock.
After above patch, adg.c had below patch for other reasons.
commit 06e8f5c842f2d ("ASoC: rsnd: don't call clk_get_rate()
under atomic context")
clk_get_rate() is used at probe() timing by this patch.
In other words, rsnd_ssi_master_clk_start() is no longer using
clk_get_rate() any more.
This means we can call it from rsnd_ssi_init() (= S) again which is
protected by spin lock.
This patch re-move it to under spin lock, and solves
1. checking ssi->xxx without spin lock issue.
2. clk setting / device start / device stop race condition.
Reported-by: Linh Phung T. Y. <[email protected]>
Signed-off-by: Kuninori Morimoto <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/soc/sh/rcar/ssi.c | 14 +++++---------
1 file changed, 5 insertions(+), 9 deletions(-)
diff --git a/sound/soc/sh/rcar/ssi.c b/sound/soc/sh/rcar/ssi.c
index 47d5ddb526f2..8926dd69e8b8 100644
--- a/sound/soc/sh/rcar/ssi.c
+++ b/sound/soc/sh/rcar/ssi.c
@@ -507,10 +507,15 @@ static int rsnd_ssi_init(struct rsnd_mod *mod,
struct rsnd_priv *priv)
{
struct rsnd_ssi *ssi = rsnd_mod_to_ssi(mod);
+ int ret;
if (!rsnd_ssi_is_run_mods(mod, io))
return 0;
+ ret = rsnd_ssi_master_clk_start(mod, io);
+ if (ret < 0)
+ return ret;
+
ssi->usrcnt++;
rsnd_mod_power_on(mod);
@@ -1060,13 +1065,6 @@ static int rsnd_ssi_pio_pointer(struct rsnd_mod *mod,
return 0;
}
-static int rsnd_ssi_prepare(struct rsnd_mod *mod,
- struct rsnd_dai_stream *io,
- struct rsnd_priv *priv)
-{
- return rsnd_ssi_master_clk_start(mod, io);
-}
-
static struct rsnd_mod_ops rsnd_ssi_pio_ops = {
.name = SSI_NAME,
.probe = rsnd_ssi_common_probe,
@@ -1079,7 +1077,6 @@ static struct rsnd_mod_ops rsnd_ssi_pio_ops = {
.pointer = rsnd_ssi_pio_pointer,
.pcm_new = rsnd_ssi_pcm_new,
.hw_params = rsnd_ssi_hw_params,
- .prepare = rsnd_ssi_prepare,
.get_status = rsnd_ssi_get_status,
};
@@ -1166,7 +1163,6 @@ static struct rsnd_mod_ops rsnd_ssi_dma_ops = {
.pcm_new = rsnd_ssi_pcm_new,
.fallback = rsnd_ssi_fallback,
.hw_params = rsnd_ssi_hw_params,
- .prepare = rsnd_ssi_prepare,
.get_status = rsnd_ssi_get_status,
};
--
2.30.2
From: Paul Menzel <[email protected]>
[ Upstream commit 715601e4e36903a653cd4294dfd3ed0019101991 ]
This reverts commit 6778ff5b21bd8e78c8bd547fd66437cf2657fd9b.
The original commit tries to address an issue, where PMC power-gating
causing the IOMMU PMC pre-init test to fail on certain desktop/mobile
platforms where the power-gating is normally enabled.
There have been several reports that the workaround still does not
guarantee to work, and can add up to 100 ms (on the worst case)
to the boot process on certain platforms such as the MSI B350M MORTAR
with AMD Ryzen 3 2200G.
Therefore, revert this commit as a prelude to removing the pre-init
test.
Link: https://lore.kernel.org/linux-iommu/[email protected]/
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=201753
Cc: Tj (Elloe Linux) <[email protected]>
Cc: Shuah Khan <[email protected]>
Cc: Alexander Monakov <[email protected]>
Cc: David Coe <[email protected]>
Signed-off-by: Paul Menzel <[email protected]>
Signed-off-by: Suravee Suthikulpanit <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Joerg Roedel <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/iommu/amd_iommu_init.c | 45 +++++++++-------------------------
1 file changed, 11 insertions(+), 34 deletions(-)
diff --git a/drivers/iommu/amd_iommu_init.c b/drivers/iommu/amd_iommu_init.c
index ad714ff375f8..31d7e2d4f304 100644
--- a/drivers/iommu/amd_iommu_init.c
+++ b/drivers/iommu/amd_iommu_init.c
@@ -12,7 +12,6 @@
#include <linux/acpi.h>
#include <linux/list.h>
#include <linux/bitmap.h>
-#include <linux/delay.h>
#include <linux/slab.h>
#include <linux/syscore_ops.h>
#include <linux/interrupt.h>
@@ -254,8 +253,6 @@ static enum iommu_init_state init_state = IOMMU_START_STATE;
static int amd_iommu_enable_interrupts(void);
static int __init iommu_go_to_state(enum iommu_init_state state);
static void init_device_table_dma(void);
-static int iommu_pc_get_set_reg(struct amd_iommu *iommu, u8 bank, u8 cntr,
- u8 fxn, u64 *value, bool is_write);
static bool amd_iommu_pre_enabled = true;
@@ -1675,11 +1672,13 @@ static int __init init_iommu_all(struct acpi_table_header *table)
return 0;
}
-static void __init init_iommu_perf_ctr(struct amd_iommu *iommu)
+static int iommu_pc_get_set_reg(struct amd_iommu *iommu, u8 bank, u8 cntr,
+ u8 fxn, u64 *value, bool is_write);
+
+static void init_iommu_perf_ctr(struct amd_iommu *iommu)
{
- int retry;
struct pci_dev *pdev = iommu->dev;
- u64 val = 0xabcd, val2 = 0, save_reg, save_src;
+ u64 val = 0xabcd, val2 = 0, save_reg = 0;
if (!iommu_feature(iommu, FEATURE_PC))
return;
@@ -1687,39 +1686,17 @@ static void __init init_iommu_perf_ctr(struct amd_iommu *iommu)
amd_iommu_pc_present = true;
/* save the value to restore, if writable */
- if (iommu_pc_get_set_reg(iommu, 0, 0, 0, &save_reg, false) ||
- iommu_pc_get_set_reg(iommu, 0, 0, 8, &save_src, false))
- goto pc_false;
-
- /*
- * Disable power gating by programing the performance counter
- * source to 20 (i.e. counts the reads and writes from/to IOMMU
- * Reserved Register [MMIO Offset 1FF8h] that are ignored.),
- * which never get incremented during this init phase.
- * (Note: The event is also deprecated.)
- */
- val = 20;
- if (iommu_pc_get_set_reg(iommu, 0, 0, 8, &val, true))
+ if (iommu_pc_get_set_reg(iommu, 0, 0, 0, &save_reg, false))
goto pc_false;
/* Check if the performance counters can be written to */
- val = 0xabcd;
- for (retry = 5; retry; retry--) {
- if (iommu_pc_get_set_reg(iommu, 0, 0, 0, &val, true) ||
- iommu_pc_get_set_reg(iommu, 0, 0, 0, &val2, false) ||
- val2)
- break;
-
- /* Wait about 20 msec for power gating to disable and retry. */
- msleep(20);
- }
-
- /* restore */
- if (iommu_pc_get_set_reg(iommu, 0, 0, 0, &save_reg, true) ||
- iommu_pc_get_set_reg(iommu, 0, 0, 8, &save_src, true))
+ if ((iommu_pc_get_set_reg(iommu, 0, 0, 0, &val, true)) ||
+ (iommu_pc_get_set_reg(iommu, 0, 0, 0, &val2, false)) ||
+ (val != val2))
goto pc_false;
- if (val != val2)
+ /* restore */
+ if (iommu_pc_get_set_reg(iommu, 0, 0, 0, &save_reg, true))
goto pc_false;
pci_info(pdev, "IOMMU performance counters supported\n");
--
2.30.2
From: Anthony Wang <[email protected]>
[ Upstream commit 56d63782af9bbd1271bff1422a6a013123eade4d ]
[Why]
Underflow observed when disabling PIP overlay in-game when
vsync is disabled, due to OTC master lock not working with
game pipe which is immediate flip.
[How]
When performing a full update, override flip_immediate value
to false for all planes, so that flip occurs on vsync.
Signed-off-by: Anthony Wang <[email protected]>
Acked-by: Bindu Ramamurthy <[email protected]>
Tested-by: Daniel Wheeler <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/amd/display/dc/core/dc.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/drivers/gpu/drm/amd/display/dc/core/dc.c b/drivers/gpu/drm/amd/display/dc/core/dc.c
index 092db590087c..14dc1b8719a9 100644
--- a/drivers/gpu/drm/amd/display/dc/core/dc.c
+++ b/drivers/gpu/drm/amd/display/dc/core/dc.c
@@ -2050,6 +2050,10 @@ static void commit_planes_for_stream(struct dc *dc,
plane_state->triplebuffer_flips = true;
}
}
+ if (update_type == UPDATE_TYPE_FULL) {
+ /* force vsync flip when reconfiguring pipes to prevent underflow */
+ plane_state->flip_immediate = false;
+ }
}
}
#endif
--
2.30.2
From: Suravee Suthikulpanit <[email protected]>
[ Upstream commit 994d6608efe4a4c8834bdc5014c86f4bc6aceea6 ]
In early AMD desktop/mobile platforms (during 2013), when the IOMMU
Performance Counter (PMC) support was first introduced in
commit 30861ddc9cca ("perf/x86/amd: Add IOMMU Performance Counter
resource management"), there was a HW bug where the counters could not
be accessed. The result was reading of the counter always return zero.
At the time, the suggested workaround was to add a test logic prior
to initializing the PMC feature to check if the counters can be programmed
and read back the same value. This has been working fine until the more
recent desktop/mobile platforms start enabling power gating for the PMC,
which prevents access to the counters. This results in the PMC support
being disabled unnecesarily.
Unfortunatly, there is no documentation of since which generation
of hardware the original PMC HW bug was fixed. Although, it was fixed
soon after the first introduction of the PMC. Base on this, we assume
that the buggy platforms are less likely to be in used, and it should
be relatively safe to remove this legacy logic.
Link: https://lore.kernel.org/linux-iommu/[email protected]/
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=201753
Cc: Tj (Elloe Linux) <[email protected]>
Cc: Shuah Khan <[email protected]>
Cc: Alexander Monakov <[email protected]>
Cc: David Coe <[email protected]>
Cc: Paul Menzel <[email protected]>
Signed-off-by: Suravee Suthikulpanit <[email protected]>
Tested-by: Shuah Khan <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Joerg Roedel <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/iommu/amd_iommu_init.c | 24 +-----------------------
1 file changed, 1 insertion(+), 23 deletions(-)
diff --git a/drivers/iommu/amd_iommu_init.c b/drivers/iommu/amd_iommu_init.c
index 31d7e2d4f304..692401e941a7 100644
--- a/drivers/iommu/amd_iommu_init.c
+++ b/drivers/iommu/amd_iommu_init.c
@@ -1672,33 +1672,16 @@ static int __init init_iommu_all(struct acpi_table_header *table)
return 0;
}
-static int iommu_pc_get_set_reg(struct amd_iommu *iommu, u8 bank, u8 cntr,
- u8 fxn, u64 *value, bool is_write);
-
static void init_iommu_perf_ctr(struct amd_iommu *iommu)
{
+ u64 val;
struct pci_dev *pdev = iommu->dev;
- u64 val = 0xabcd, val2 = 0, save_reg = 0;
if (!iommu_feature(iommu, FEATURE_PC))
return;
amd_iommu_pc_present = true;
- /* save the value to restore, if writable */
- if (iommu_pc_get_set_reg(iommu, 0, 0, 0, &save_reg, false))
- goto pc_false;
-
- /* Check if the performance counters can be written to */
- if ((iommu_pc_get_set_reg(iommu, 0, 0, 0, &val, true)) ||
- (iommu_pc_get_set_reg(iommu, 0, 0, 0, &val2, false)) ||
- (val != val2))
- goto pc_false;
-
- /* restore */
- if (iommu_pc_get_set_reg(iommu, 0, 0, 0, &save_reg, true))
- goto pc_false;
-
pci_info(pdev, "IOMMU performance counters supported\n");
val = readl(iommu->mmio_base + MMIO_CNTR_CONF_OFFSET);
@@ -1706,11 +1689,6 @@ static void init_iommu_perf_ctr(struct amd_iommu *iommu)
iommu->max_counters = (u8) ((val >> 7) & 0xf);
return;
-
-pc_false:
- pci_err(pdev, "Unable to read/write to IOMMU perf counter.\n");
- amd_iommu_pc_present = false;
- return;
}
static ssize_t amd_iommu_show_cap(struct device *dev,
--
2.30.2
From: Jonathan McDowell <[email protected]>
[ Upstream commit e127906b68b49ddb3ecba39ffa36a329c48197d3 ]
Commit eaf4fac47807 ("net: stmmac: Do not accept invalid MTU values")
started using the TX FIFO size to verify what counts as a valid MTU
request for the stmmac driver. This is unset for the ipq806x variant.
Looking at older patches for this it seems the RX + TXs buffers can be
up to 8k, so set appropriately.
(I sent this as an RFC patch in June last year, but received no replies.
I've been running with this on my hardware (a MikroTik RB3011) since
then with larger MTUs to support both the internal qca8k switch and
VLANs with no problems. Without the patch it's impossible to set the
larger MTU required to support this.)
Signed-off-by: Jonathan McDowell <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/stmicro/stmmac/dwmac-ipq806x.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-ipq806x.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-ipq806x.c
index 826626e870d5..0f56f8e33691 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-ipq806x.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-ipq806x.c
@@ -351,6 +351,8 @@ static int ipq806x_gmac_probe(struct platform_device *pdev)
plat_dat->bsp_priv = gmac;
plat_dat->fix_mac_speed = ipq806x_gmac_fix_mac_speed;
plat_dat->multicast_filter_bins = 0;
+ plat_dat->tx_fifo_size = 8192;
+ plat_dat->rx_fifo_size = 8192;
err = stmmac_dvr_probe(&pdev->dev, plat_dat, &stmmac_res);
if (err)
--
2.30.2
From: Alexander Aring <[email protected]>
[ Upstream commit 92c48950b43f4a767388cf87709d8687151a641f ]
This patch fixes the following message which randomly pops up during
glocktop call:
seq_file: buggy .next function table_seq_next did not update position index
The issue is that seq_read_iter() in fs/seq_file.c also needs an
increment of the index in an non next record case as well which this
patch fixes otherwise seq_read_iter() will print out the above message.
Signed-off-by: Alexander Aring <[email protected]>
Signed-off-by: David Teigland <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/dlm/debug_fs.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/fs/dlm/debug_fs.c b/fs/dlm/debug_fs.c
index d6bbccb0ed15..d5bd990bcab8 100644
--- a/fs/dlm/debug_fs.c
+++ b/fs/dlm/debug_fs.c
@@ -542,6 +542,7 @@ static void *table_seq_next(struct seq_file *seq, void *iter_ptr, loff_t *pos)
if (bucket >= ls->ls_rsbtbl_size) {
kfree(ri);
+ ++*pos;
return NULL;
}
tree = toss ? &ls->ls_rsbtbl[bucket].toss : &ls->ls_rsbtbl[bucket].keep;
--
2.30.2
From: Kai Vehmanen <[email protected]>
[ Upstream commit 0c37e2eb6b83e375e8a654d01598292d5591fc65 ]
When snd-hda-codec-hdmi is used with ASoC HDA controller like SOF (acomp
used for ELD notifications), display connection change done during suspend,
can be lost due to following sequence of events:
1. system in S3 suspend
2. DP/HDMI receiver connected
3. system resumed
4. HDA controller resumed, but card->deferred_resume_work not complete
5. acomp eld_notify callback
6. eld_notify ignored as power state is not CTL_POWER_D0
7. HDA resume deferred work completed, power state set to CTL_POWER_D0
This results in losing the notification, and the jack state reported to
user-space is not correct.
The check on step 6 was added in commit 8ae743e82f0b ("ALSA: hda - Skip
ELD notification during system suspend"). It would seem with the deferred
resume logic in ASoC core, this check is not safe.
Fix the issue by modifying the check to use "dev.power.power_state.event"
instead of ALSA specific card power state variable.
BugLink: https://github.com/thesofproject/linux/issues/2825
Suggested-by: Takashi Iwai <[email protected]>
Signed-off-by: Kai Vehmanen <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/pci/hda/patch_hdmi.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/sound/pci/hda/patch_hdmi.c b/sound/pci/hda/patch_hdmi.c
index ce38b5d4670d..f620b402b309 100644
--- a/sound/pci/hda/patch_hdmi.c
+++ b/sound/pci/hda/patch_hdmi.c
@@ -2567,7 +2567,7 @@ static void generic_acomp_pin_eld_notify(void *audio_ptr, int port, int dev_id)
/* skip notification during system suspend (but not in runtime PM);
* the state will be updated at resume
*/
- if (snd_power_get_state(codec->card) != SNDRV_CTL_POWER_D0)
+ if (codec->core.dev.power.power_state.event == PM_EVENT_SUSPEND)
return;
/* ditto during suspend/resume process itself */
if (snd_hdac_is_in_pm(&codec->core))
@@ -2772,7 +2772,7 @@ static void intel_pin_eld_notify(void *audio_ptr, int port, int pipe)
/* skip notification during system suspend (but not in runtime PM);
* the state will be updated at resume
*/
- if (snd_power_get_state(codec->card) != SNDRV_CTL_POWER_D0)
+ if (codec->core.dev.power.power_state.event == PM_EVENT_SUSPEND)
return;
/* ditto during suspend/resume process itself */
if (snd_hdac_is_in_pm(&codec->core))
--
2.30.2
From: Mihai Moldovan <[email protected]>
[ Upstream commit 8c94b430b9f6213dec84e309bb480a71778c4213 ]
If the user selects the very first entry in a page and performs a
search-up operation, or selects the very last entry in a page and
performs a search-down operation that will not succeed (e.g., via
[/]asdfzzz[Up Arrow]), nconf will never terminate searching the page.
The reason is that in this case, the starting point will be set to -1
or n, which is then translated into (n - 1) (i.e., the last entry of
the page) or 0 (i.e., the first entry of the page) and finally the
search begins. This continues to work fine until the index reaches 0 or
(n - 1), at which point it will be decremented to -1 or incremented to
n, but not checked against the starting point right away. Instead, it's
wrapped around to the bottom or top again, after which the starting
point check occurs... and naturally fails.
My original implementation added another check for -1 before wrapping
the running index variable around, but Masahiro Yamada pointed out that
the actual issue is that the comparison point (starting point) exceeds
bounds (i.e., the [0,n-1] interval) in the first place and that,
instead, the starting point should be fixed.
This has the welcome side-effect of also fixing the case where the
starting point was n while searching down, which also lead to an
infinite loop.
OTOH, this code is now essentially all his work.
Amazingly, nobody seems to have been hit by this for 11 years - or at
the very least nobody bothered to debug and fix this.
Signed-off-by: Mihai Moldovan <[email protected]>
Signed-off-by: Masahiro Yamada <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
scripts/kconfig/nconf.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/scripts/kconfig/nconf.c b/scripts/kconfig/nconf.c
index b7c1ef757178..331b2cc917ec 100644
--- a/scripts/kconfig/nconf.c
+++ b/scripts/kconfig/nconf.c
@@ -503,8 +503,8 @@ static int get_mext_match(const char *match_str, match_f flag)
else if (flag == FIND_NEXT_MATCH_UP)
--match_start;
+ match_start = (match_start + items_num) % items_num;
index = match_start;
- index = (index + items_num) % items_num;
while (true) {
char *str = k_menu_items[index].str;
if (strcasestr(str, match_str) != NULL)
--
2.30.2
From: Gustavo A. R. Silva <[email protected]>
[ Upstream commit e5272ad4aab347dde5610c0aedb786219e3ff793 ]
Fix the following out-of-bounds warning:
net/sctp/sm_make_chunk.c:3150:4: warning: 'memcpy' offset [17, 28] from the object at 'addr' is out of the bounds of referenced subobject 'v4' with type 'struct sockaddr_in' at offset 0 [-Warray-bounds]
This helps with the ongoing efforts to globally enable -Warray-bounds
and get us closer to being able to tighten the FORTIFY_SOURCE routines
on memcpy().
Link: https://github.com/KSPP/linux/issues/109
Reported-by: kernel test robot <[email protected]>
Signed-off-by: Gustavo A. R. Silva <[email protected]>
Reviewed-by: Kees Cook <[email protected]>
Acked-by: Marcelo Ricardo Leitner <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/sctp/sm_make_chunk.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/net/sctp/sm_make_chunk.c b/net/sctp/sm_make_chunk.c
index d5eda966a706..4ffb9116b6f2 100644
--- a/net/sctp/sm_make_chunk.c
+++ b/net/sctp/sm_make_chunk.c
@@ -3134,7 +3134,7 @@ static __be16 sctp_process_asconf_param(struct sctp_association *asoc,
* primary.
*/
if (af->is_any(&addr))
- memcpy(&addr.v4, sctp_source(asconf), sizeof(addr));
+ memcpy(&addr, sctp_source(asconf), sizeof(addr));
if (security_sctp_bind_connect(asoc->ep->base.sk,
SCTP_PARAM_SET_PRIMARY,
--
2.30.2
From: Gustavo A. R. Silva <[email protected]>
[ Upstream commit 1e3d976dbb23b3fce544752b434bdc32ce64aabc ]
Fix the following out-of-bounds warning:
net/core/flow_dissector.c:835:3: warning: 'memcpy' offset [33, 48] from the object at 'flow_keys' is out of the bounds of referenced subobject 'ipv6_src' with type '__u32[4]' {aka 'unsigned int[4]'} at offset 16 [-Warray-bounds]
The problem is that the original code is trying to copy data into a
couple of struct members adjacent to each other in a single call to
memcpy(). So, the compiler legitimately complains about it. As these
are just a couple of members, fix this by copying each one of them in
separate calls to memcpy().
This helps with the ongoing efforts to globally enable -Warray-bounds
and get us closer to being able to tighten the FORTIFY_SOURCE routines
on memcpy().
Link: https://github.com/KSPP/linux/issues/109
Reported-by: kernel test robot <[email protected]>
Signed-off-by: Gustavo A. R. Silva <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/core/flow_dissector.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/net/core/flow_dissector.c b/net/core/flow_dissector.c
index da86c0e1b677..96957a7c732f 100644
--- a/net/core/flow_dissector.c
+++ b/net/core/flow_dissector.c
@@ -811,8 +811,10 @@ static void __skb_flow_bpf_to_target(const struct bpf_flow_keys *flow_keys,
key_addrs = skb_flow_dissector_target(flow_dissector,
FLOW_DISSECTOR_KEY_IPV6_ADDRS,
target_container);
- memcpy(&key_addrs->v6addrs, &flow_keys->ipv6_src,
- sizeof(key_addrs->v6addrs));
+ memcpy(&key_addrs->v6addrs.src, &flow_keys->ipv6_src,
+ sizeof(key_addrs->v6addrs.src));
+ memcpy(&key_addrs->v6addrs.dst, &flow_keys->ipv6_dst,
+ sizeof(key_addrs->v6addrs.dst));
key_control->addr_type = FLOW_DISSECTOR_KEY_IPV6_ADDRS;
}
--
2.30.2
From: Srikar Dronamraju <[email protected]>
[ Upstream commit 6980d13f0dd189846887bbbfa43793d9a41768d3 ]
Geethika reported a trace when doing a dlpar CPU add.
------------[ cut here ]------------
WARNING: CPU: 152 PID: 1134 at kernel/sched/topology.c:2057
CPU: 152 PID: 1134 Comm: kworker/152:1 Not tainted 5.12.0-rc5-master #5
Workqueue: events cpuset_hotplug_workfn
NIP: c0000000001cfc14 LR: c0000000001cfc10 CTR: c0000000007e3420
REGS: c0000034a08eb260 TRAP: 0700 Not tainted (5.12.0-rc5-master+)
MSR: 8000000000029033 <SF,EE,ME,IR,DR,RI,LE> CR: 28828422 XER: 00000020
CFAR: c0000000001fd888 IRQMASK: 0 #012GPR00: c0000000001cfc10
c0000034a08eb500 c000000001f35400 0000000000000027 #012GPR04:
c0000035abaa8010 c0000035abb30a00 0000000000000027 c0000035abaa8018
#012GPR08: 0000000000000023 c0000035abaaef48 00000035aa540000
c0000035a49dffe8 #012GPR12: 0000000028828424 c0000035bf1a1c80
0000000000000497 0000000000000004 #012GPR16: c00000000347a258
0000000000000140 c00000000203d468 c000000001a1a490 #012GPR20:
c000000001f9c160 c0000034adf70920 c0000034aec9fd20 0000000100087bd3
#012GPR24: 0000000100087bd3 c0000035b3de09f8 0000000000000030
c0000035b3de09f8 #012GPR28: 0000000000000028 c00000000347a280
c0000034aefe0b00 c0000000010a2a68
NIP [c0000000001cfc14] build_sched_domains+0x6a4/0x1500
LR [c0000000001cfc10] build_sched_domains+0x6a0/0x1500
Call Trace:
[c0000034a08eb500] [c0000000001cfc10] build_sched_domains+0x6a0/0x1500 (unreliable)
[c0000034a08eb640] [c0000000001d1e6c] partition_sched_domains_locked+0x3ec/0x530
[c0000034a08eb6e0] [c0000000002936d4] rebuild_sched_domains_locked+0x524/0xbf0
[c0000034a08eb7e0] [c000000000296bb0] rebuild_sched_domains+0x40/0x70
[c0000034a08eb810] [c000000000296e74] cpuset_hotplug_workfn+0x294/0xe20
[c0000034a08ebc30] [c000000000178dd0] process_one_work+0x300/0x670
[c0000034a08ebd10] [c0000000001791b8] worker_thread+0x78/0x520
[c0000034a08ebda0] [c000000000185090] kthread+0x1a0/0x1b0
[c0000034a08ebe10] [c00000000000ccec] ret_from_kernel_thread+0x5c/0x70
Instruction dump:
7d2903a6 4e800421 e8410018 7f67db78 7fe6fb78 7f45d378 7f84e378 7c681b78
3c62ff1a 3863c6f8 4802dc35 60000000 <0fe00000> 3920fff4 f9210070 e86100a0
---[ end trace 532d9066d3d4d7ec ]---
Some of the per-CPU masks use cpu_cpu_mask as a filter to limit the search
for related CPUs. On a dlpar add of a CPU, update cpu_cpu_mask before
updating the per-CPU masks. This will ensure the cpu_cpu_mask is updated
correctly before its used in setting the masks. Setting the numa_node will
ensure that when cpu_cpu_mask() gets called, the correct node number is
used. This code movement helped fix the above call trace.
Reported-by: Geetika Moolchandani <[email protected]>
Signed-off-by: Srikar Dronamraju <[email protected]>
Reviewed-by: Nathan Lynch <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
arch/powerpc/kernel/smp.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/arch/powerpc/kernel/smp.c b/arch/powerpc/kernel/smp.c
index ea6adbf6a221..b24d860bbab9 100644
--- a/arch/powerpc/kernel/smp.c
+++ b/arch/powerpc/kernel/smp.c
@@ -1254,6 +1254,9 @@ void start_secondary(void *unused)
vdso_getcpu_init();
#endif
+ set_numa_node(numa_cpu_lookup_table[cpu]);
+ set_numa_mem(local_memory_node(numa_cpu_lookup_table[cpu]));
+
/* Update topology CPU masks */
add_cpu_to_masks(cpu);
@@ -1266,9 +1269,6 @@ void start_secondary(void *unused)
if (!cpumask_equal(cpu_l2_cache_mask(cpu), sibling_mask(cpu)))
shared_caches = true;
- set_numa_node(numa_cpu_lookup_table[cpu]);
- set_numa_mem(local_memory_node(numa_cpu_lookup_table[cpu]));
-
smp_wmb();
notify_cpu_starting(cpu);
set_cpu_online(cpu, true);
--
2.30.2
From: David Ward <[email protected]>
[ Upstream commit aa2f9c12821e6a4ba1df4fb34a3dbc6a2a1ee7fe ]
The ALC3263 codec on the XPS 13 9343 is also found on the Latitude 13 7350
and Venue 11 Pro 7140. They require the same handling for the combo jack to
work with a headset: GPIO pin 6 must be set.
The HDA driver always sets this pin on the ALC3263, which it distinguishes
by the codec vendor/device ID 0x10ec0288 and PCI subsystem vendor ID 0x1028
(Dell). The ASoC driver does not use PCI, so adapt this check to use DMI to
determine if Dell is the system vendor.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=150601
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=205961
Signed-off-by: David Ward <[email protected]>
Reviewed-by: Pierre-Louis Bossart <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/soc/codecs/rt286.c | 20 ++++++++++----------
1 file changed, 10 insertions(+), 10 deletions(-)
diff --git a/sound/soc/codecs/rt286.c b/sound/soc/codecs/rt286.c
index 9593a9a27bf8..03e3e0aa25a2 100644
--- a/sound/soc/codecs/rt286.c
+++ b/sound/soc/codecs/rt286.c
@@ -1115,12 +1115,11 @@ static const struct dmi_system_id force_combo_jack_table[] = {
{ }
};
-static const struct dmi_system_id dmi_dell_dino[] = {
+static const struct dmi_system_id dmi_dell[] = {
{
- .ident = "Dell Dino",
+ .ident = "Dell",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
- DMI_MATCH(DMI_PRODUCT_NAME, "XPS 13 9343")
}
},
{ }
@@ -1131,7 +1130,7 @@ static int rt286_i2c_probe(struct i2c_client *i2c,
{
struct rt286_platform_data *pdata = dev_get_platdata(&i2c->dev);
struct rt286_priv *rt286;
- int i, ret, val;
+ int i, ret, vendor_id;
rt286 = devm_kzalloc(&i2c->dev, sizeof(*rt286),
GFP_KERNEL);
@@ -1147,14 +1146,15 @@ static int rt286_i2c_probe(struct i2c_client *i2c,
}
ret = regmap_read(rt286->regmap,
- RT286_GET_PARAM(AC_NODE_ROOT, AC_PAR_VENDOR_ID), &val);
+ RT286_GET_PARAM(AC_NODE_ROOT, AC_PAR_VENDOR_ID), &vendor_id);
if (ret != 0) {
dev_err(&i2c->dev, "I2C error %d\n", ret);
return ret;
}
- if (val != RT286_VENDOR_ID && val != RT288_VENDOR_ID) {
+ if (vendor_id != RT286_VENDOR_ID && vendor_id != RT288_VENDOR_ID) {
dev_err(&i2c->dev,
- "Device with ID register %#x is not rt286\n", val);
+ "Device with ID register %#x is not rt286\n",
+ vendor_id);
return -ENODEV;
}
@@ -1178,8 +1178,8 @@ static int rt286_i2c_probe(struct i2c_client *i2c,
if (pdata)
rt286->pdata = *pdata;
- if (dmi_check_system(force_combo_jack_table) ||
- dmi_check_system(dmi_dell_dino))
+ if ((vendor_id == RT288_VENDOR_ID && dmi_check_system(dmi_dell)) ||
+ dmi_check_system(force_combo_jack_table))
rt286->pdata.cbj_en = true;
regmap_write(rt286->regmap, RT286_SET_AUDIO_POWER, AC_PWRST_D3);
@@ -1218,7 +1218,7 @@ static int rt286_i2c_probe(struct i2c_client *i2c,
regmap_update_bits(rt286->regmap, RT286_DEPOP_CTRL3, 0xf777, 0x4737);
regmap_update_bits(rt286->regmap, RT286_DEPOP_CTRL4, 0x00ff, 0x003f);
- if (dmi_check_system(dmi_dell_dino)) {
+ if (vendor_id == RT288_VENDOR_ID && dmi_check_system(dmi_dell)) {
regmap_update_bits(rt286->regmap,
RT286_SET_GPIO_MASK, 0x40, 0x40);
regmap_update_bits(rt286->regmap,
--
2.30.2
From: Gustavo A. R. Silva <[email protected]>
[ Upstream commit c1d9e34e11281a8ba1a1c54e4db554232a461488 ]
Fix the following out-of-bounds warning:
net/ethtool/ioctl.c:492:2: warning: 'memcpy' offset [49, 84] from the object at 'link_usettings' is out of the bounds of referenced subobject 'base' with type 'struct ethtool_link_settings' at offset 0 [-Warray-bounds]
The problem is that the original code is trying to copy data into a
some struct members adjacent to each other in a single call to
memcpy(). This causes a legitimate compiler warning because memcpy()
overruns the length of &link_usettings.base. Fix this by directly
using &link_usettings and _from_ as destination and source addresses,
instead.
This helps with the ongoing efforts to globally enable -Warray-bounds
and get us closer to being able to tighten the FORTIFY_SOURCE routines
on memcpy().
Link: https://github.com/KSPP/linux/issues/109
Reported-by: kernel test robot <[email protected]>
Signed-off-by: Gustavo A. R. Silva <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/core/ethtool.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/net/core/ethtool.c b/net/core/ethtool.c
index cd9bc67381b2..76506975d59a 100644
--- a/net/core/ethtool.c
+++ b/net/core/ethtool.c
@@ -589,7 +589,7 @@ store_link_ksettings_for_user(void __user *to,
{
struct ethtool_link_usettings link_usettings;
- memcpy(&link_usettings.base, &from->base, sizeof(link_usettings));
+ memcpy(&link_usettings, from, sizeof(link_usettings));
bitmap_to_arr32(link_usettings.link_modes.supported,
from->link_modes.supported,
__ETHTOOL_LINK_MODE_MASK_NBITS);
--
2.30.2
From: Du Cheng <[email protected]>
[ Upstream commit ed8157f1ebf1ae81a8fa2653e3f20d2076fad1c9 ]
There is a reproducible sequence from the userland that will trigger a WARN_ON()
condition in taprio_get_start_time, which causes kernel to panic if configured
as "panic_on_warn". Catch this condition in parse_taprio_schedule to
prevent this condition.
Reported as bug on syzkaller:
https://syzkaller.appspot.com/bug?extid=d50710fd0873a9c6b40c
Reported-by: [email protected]
Signed-off-by: Du Cheng <[email protected]>
Acked-by: Cong Wang <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/sched/sch_taprio.c | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/net/sched/sch_taprio.c b/net/sched/sch_taprio.c
index 09116be99511..a4de4853c79d 100644
--- a/net/sched/sch_taprio.c
+++ b/net/sched/sch_taprio.c
@@ -900,6 +900,12 @@ static int parse_taprio_schedule(struct taprio_sched *q, struct nlattr **tb,
list_for_each_entry(entry, &new->entries, list)
cycle = ktime_add_ns(cycle, entry->interval);
+
+ if (!cycle) {
+ NL_SET_ERR_MSG(extack, "'cycle_time' can never be 0");
+ return -EINVAL;
+ }
+
new->cycle_time = cycle;
}
--
2.30.2
From: Yaqi Chen <[email protected]>
[ Upstream commit 137733d08f4ab14a354dacaa9a8fc35217747605 ]
>From commit c0bbbdc32feb ("__netif_receive_skb_core: pass skb by
reference"), the first argument passed into __netif_receive_skb_core
has changed to reference of a skb pointer.
This commit fixes by using bpf_probe_read_kernel.
Signed-off-by: Yaqi Chen <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
Acked-by: Yonghong Song <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
samples/bpf/tracex1_kern.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/samples/bpf/tracex1_kern.c b/samples/bpf/tracex1_kern.c
index 107da148820f..9c74b45c5720 100644
--- a/samples/bpf/tracex1_kern.c
+++ b/samples/bpf/tracex1_kern.c
@@ -20,7 +20,7 @@
SEC("kprobe/__netif_receive_skb_core")
int bpf_prog1(struct pt_regs *ctx)
{
- /* attaches to kprobe netif_receive_skb,
+ /* attaches to kprobe __netif_receive_skb_core,
* looks for packets on loobpack device and prints them
*/
char devname[IFNAMSIZ];
@@ -29,7 +29,7 @@ int bpf_prog1(struct pt_regs *ctx)
int len;
/* non-portable! works for the given kernel only */
- skb = (struct sk_buff *) PT_REGS_PARM1(ctx);
+ bpf_probe_read_kernel(&skb, sizeof(skb), (void *)PT_REGS_PARM1(ctx));
dev = _(skb->dev);
len = _(skb->len);
--
2.30.2
From: Robin Singh <[email protected]>
[ Upstream commit 19cc1f3829567e7dca21c1389ea6407b8f5efab4 ]
[why]
During dsc enable, a divide by zero condition triggered the
kernel crash.
[how]
An IGT test, which enable the DSC, was crashing at the time of
restore the default dsc status, becaue of h_totals value
becoming 0. So add a check before divide condition. If h_total
is zero, gracefully ignore and set the default value.
kernel panic log:
[ 128.758827] divide error: 0000 [#1] PREEMPT SMP NOPTI
[ 128.762714] CPU: 5 PID: 4562 Comm: amd_dp_dsc Tainted: G W 5.4.19-android-x86_64 #1
[ 128.769728] Hardware name: ADVANCED MICRO DEVICES, INC. Mauna/Mauna, BIOS WMN0B13N Nov 11 2020
[ 128.777695] RIP: 0010:hubp2_vready_at_or_After_vsync+0x37/0x7a [amdgpu]
[ 128.785707] Code: 80 02 00 00 48 89 f3 48 8b 7f 08 b ......
[ 128.805696] RSP: 0018:ffffad8f82d43628 EFLAGS: 00010246
......
[ 128.857707] CR2: 00007106d8465000 CR3: 0000000426530000 CR4: 0000000000140ee0
[ 128.865695] Call Trace:
[ 128.869712] hubp3_setup+0x1f/0x7f [amdgpu]
[ 128.873705] dcn20_update_dchubp_dpp+0xc8/0x54a [amdgpu]
[ 128.877706] dcn20_program_front_end_for_ctx+0x31d/0x463 [amdgpu]
[ 128.885706] dc_commit_state+0x3d2/0x658 [amdgpu]
[ 128.889707] amdgpu_dm_atomic_commit_tail+0x4b3/0x1e7c [amdgpu]
[ 128.897699] ? dm_read_reg_func+0x41/0xb5 [amdgpu]
[ 128.901707] ? dm_read_reg_func+0x41/0xb5 [amdgpu]
[ 128.905706] ? __is_insn_slot_addr+0x43/0x48
[ 128.909706] ? fill_plane_buffer_attributes+0x29e/0x3dc [amdgpu]
[ 128.917705] ? dm_plane_helper_prepare_fb+0x255/0x284 [amdgpu]
[ 128.921700] ? usleep_range+0x7c/0x7c
[ 128.925705] ? preempt_count_sub+0xf/0x18
[ 128.929706] ? _raw_spin_unlock_irq+0x13/0x24
[ 128.933732] ? __wait_for_common+0x11e/0x18f
[ 128.937705] ? _raw_spin_unlock_irq+0x13/0x24
[ 128.941706] ? __wait_for_common+0x11e/0x18f
[ 128.945705] commit_tail+0x8b/0xd2 [drm_kms_helper]
[ 128.949707] drm_atomic_helper_commit+0xd8/0xf5 [drm_kms_helper]
[ 128.957706] amdgpu_dm_atomic_commit+0x337/0x360 [amdgpu]
[ 128.961705] ? drm_atomic_check_only+0x543/0x68d [drm]
[ 128.969705] ? drm_atomic_set_property+0x760/0x7af [drm]
[ 128.973704] ? drm_mode_atomic_ioctl+0x6f3/0x85a [drm]
[ 128.977705] drm_mode_atomic_ioctl+0x6f3/0x85a [drm]
[ 128.985705] ? drm_atomic_set_property+0x7af/0x7af [drm]
[ 128.989706] drm_ioctl_kernel+0x82/0xda [drm]
[ 128.993706] drm_ioctl+0x225/0x319 [drm]
[ 128.997707] ? drm_atomic_set_property+0x7af/0x7af [drm]
[ 129.001706] ? preempt_count_sub+0xf/0x18
[ 129.005713] amdgpu_drm_ioctl+0x4b/0x76 [amdgpu]
[ 129.009705] vfs_ioctl+0x1d/0x2a
[ 129.013705] do_vfs_ioctl+0x419/0x43d
[ 129.017707] ksys_ioctl+0x52/0x71
[ 129.021707] __x64_sys_ioctl+0x16/0x19
[ 129.025706] do_syscall_64+0x78/0x85
[ 129.029705] entry_SYSCALL_64_after_hwframe+0x44/0xa9
Signed-off-by: Robin Singh <[email protected]>
Reviewed-by: Harry Wentland <[email protected]>
Reviewed-by: Robin Singh <[email protected]>
Acked-by: Aurabindo Pillai <[email protected]>
Tested-by: Daniel Wheeler <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/amd/display/dc/dcn20/dcn20_hubp.c | 15 +++++++++------
1 file changed, 9 insertions(+), 6 deletions(-)
diff --git a/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_hubp.c b/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_hubp.c
index 69e2aae42394..b250ef75c163 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_hubp.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_hubp.c
@@ -1,5 +1,5 @@
/*
- * Copyright 2012-17 Advanced Micro Devices, Inc.
+ * Copyright 2012-2021 Advanced Micro Devices, Inc.
*
* Permission is hereby granted, free of charge, to any person obtaining a
* copy of this software and associated documentation files (the "Software"),
@@ -179,11 +179,14 @@ void hubp2_vready_at_or_After_vsync(struct hubp *hubp,
else
Set HUBP_VREADY_AT_OR_AFTER_VSYNC = 0
*/
- if ((pipe_dest->vstartup_start - (pipe_dest->vready_offset+pipe_dest->vupdate_width
- + pipe_dest->vupdate_offset) / pipe_dest->htotal) <= pipe_dest->vblank_end) {
- value = 1;
- } else
- value = 0;
+ if (pipe_dest->htotal != 0) {
+ if ((pipe_dest->vstartup_start - (pipe_dest->vready_offset+pipe_dest->vupdate_width
+ + pipe_dest->vupdate_offset) / pipe_dest->htotal) <= pipe_dest->vblank_end) {
+ value = 1;
+ } else
+ value = 0;
+ }
+
REG_UPDATE(DCHUBP_CNTL, HUBP_VREADY_AT_OR_AFTER_VSYNC, value);
}
--
2.30.2
From: Gustavo A. R. Silva <[email protected]>
[ Upstream commit 820aa37638a252b57967bdf4038a514b1ab85d45 ]
Fix the following out-of-bounds warnings by enclosing structure members
daddr and saddr into new struct addr, in structures wl3501_md_req and
wl3501_md_ind:
arch/x86/include/asm/string_32.h:182:25: warning: '__builtin_memcpy' offset [18, 23] from the object at 'sig' is out of the bounds of referenced subobject 'daddr' with type 'u8[6]' {aka 'unsigned char[6]'} at offset 11 [-Warray-bounds]
arch/x86/include/asm/string_32.h:182:25: warning: '__builtin_memcpy' offset [18, 23] from the object at 'sig' is out of the bounds of referenced subobject 'daddr' with type 'u8[6]' {aka 'unsigned char[6]'} at offset 11 [-Warray-bounds]
Refactor the code, accordingly:
$ pahole -C wl3501_md_req drivers/net/wireless/wl3501_cs.o
struct wl3501_md_req {
u16 next_blk; /* 0 2 */
u8 sig_id; /* 2 1 */
u8 routing; /* 3 1 */
u16 data; /* 4 2 */
u16 size; /* 6 2 */
u8 pri; /* 8 1 */
u8 service_class; /* 9 1 */
struct {
u8 daddr[6]; /* 10 6 */
u8 saddr[6]; /* 16 6 */
} addr; /* 10 12 */
/* size: 22, cachelines: 1, members: 8 */
/* last cacheline: 22 bytes */
};
$ pahole -C wl3501_md_ind drivers/net/wireless/wl3501_cs.o
struct wl3501_md_ind {
u16 next_blk; /* 0 2 */
u8 sig_id; /* 2 1 */
u8 routing; /* 3 1 */
u16 data; /* 4 2 */
u16 size; /* 6 2 */
u8 reception; /* 8 1 */
u8 pri; /* 9 1 */
u8 service_class; /* 10 1 */
struct {
u8 daddr[6]; /* 11 6 */
u8 saddr[6]; /* 17 6 */
} addr; /* 11 12 */
/* size: 24, cachelines: 1, members: 9 */
/* padding: 1 */
/* last cacheline: 24 bytes */
};
The problem is that the original code is trying to copy data into a
couple of arrays adjacent to each other in a single call to memcpy().
Now that a new struct _addr_ enclosing those two adjacent arrays
is introduced, memcpy() doesn't overrun the length of &sig.daddr[0]
and &sig.daddr, because the address of the new struct object _addr_
is used, instead.
This helps with the ongoing efforts to globally enable -Warray-bounds
and get us closer to being able to tighten the FORTIFY_SOURCE routines
on memcpy().
Link: https://github.com/KSPP/linux/issues/109
Reported-by: kernel test robot <[email protected]>
Reviewed-by: Kees Cook <[email protected]>
Signed-off-by: Gustavo A. R. Silva <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/d260fe56aed7112bff2be5b4d152d03ad7b78e78.1618442265.git.gustavoars@kernel.org
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/wl3501.h | 12 ++++++++----
drivers/net/wireless/wl3501_cs.c | 10 ++++++----
2 files changed, 14 insertions(+), 8 deletions(-)
diff --git a/drivers/net/wireless/wl3501.h b/drivers/net/wireless/wl3501.h
index efdce9ae36ea..077a934ae3b5 100644
--- a/drivers/net/wireless/wl3501.h
+++ b/drivers/net/wireless/wl3501.h
@@ -471,8 +471,10 @@ struct wl3501_md_req {
u16 size;
u8 pri;
u8 service_class;
- u8 daddr[ETH_ALEN];
- u8 saddr[ETH_ALEN];
+ struct {
+ u8 daddr[ETH_ALEN];
+ u8 saddr[ETH_ALEN];
+ } addr;
};
struct wl3501_md_ind {
@@ -484,8 +486,10 @@ struct wl3501_md_ind {
u8 reception;
u8 pri;
u8 service_class;
- u8 daddr[ETH_ALEN];
- u8 saddr[ETH_ALEN];
+ struct {
+ u8 daddr[ETH_ALEN];
+ u8 saddr[ETH_ALEN];
+ } addr;
};
struct wl3501_md_confirm {
diff --git a/drivers/net/wireless/wl3501_cs.c b/drivers/net/wireless/wl3501_cs.c
index 007bf6803293..96eb69678855 100644
--- a/drivers/net/wireless/wl3501_cs.c
+++ b/drivers/net/wireless/wl3501_cs.c
@@ -469,6 +469,7 @@ static int wl3501_send_pkt(struct wl3501_card *this, u8 *data, u16 len)
struct wl3501_md_req sig = {
.sig_id = WL3501_SIG_MD_REQ,
};
+ size_t sig_addr_len = sizeof(sig.addr);
u8 *pdata = (char *)data;
int rc = -EIO;
@@ -484,9 +485,9 @@ static int wl3501_send_pkt(struct wl3501_card *this, u8 *data, u16 len)
goto out;
}
rc = 0;
- memcpy(&sig.daddr[0], pdata, 12);
- pktlen = len - 12;
- pdata += 12;
+ memcpy(&sig.addr, pdata, sig_addr_len);
+ pktlen = len - sig_addr_len;
+ pdata += sig_addr_len;
sig.data = bf;
if (((*pdata) * 256 + (*(pdata + 1))) > 1500) {
u8 addr4[ETH_ALEN] = {
@@ -980,7 +981,8 @@ static inline void wl3501_md_ind_interrupt(struct net_device *dev,
} else {
skb->dev = dev;
skb_reserve(skb, 2); /* IP headers on 16 bytes boundaries */
- skb_copy_to_linear_data(skb, (unsigned char *)&sig.daddr, 12);
+ skb_copy_to_linear_data(skb, (unsigned char *)&sig.addr,
+ sizeof(sig.addr));
wl3501_receive(this, skb->data, pkt_len);
skb_put(skb, pkt_len);
skb->protocol = eth_type_trans(skb, dev);
--
2.30.2
From: Michael Ellerman <[email protected]>
[ Upstream commit ed8029d7b472369a010a1901358567ca3b6dbb0d ]
RCU complains about us calling printk() from an offline CPU:
=============================
WARNING: suspicious RCU usage
5.12.0-rc7-02874-g7cf90e481cb8 #1 Not tainted
-----------------------------
kernel/locking/lockdep.c:3568 RCU-list traversed in non-reader section!!
other info that might help us debug this:
RCU used illegally from offline CPU!
rcu_scheduler_active = 2, debug_locks = 1
no locks held by swapper/0/0.
stack backtrace:
CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.12.0-rc7-02874-g7cf90e481cb8 #1
Call Trace:
dump_stack+0xec/0x144 (unreliable)
lockdep_rcu_suspicious+0x124/0x144
__lock_acquire+0x1098/0x28b0
lock_acquire+0x128/0x600
_raw_spin_lock_irqsave+0x6c/0xc0
down_trylock+0x2c/0x70
__down_trylock_console_sem+0x60/0x140
vprintk_emit+0x1a8/0x4b0
vprintk_func+0xcc/0x200
printk+0x40/0x54
pseries_cpu_offline_self+0xc0/0x120
arch_cpu_idle_dead+0x54/0x70
do_idle+0x174/0x4a0
cpu_startup_entry+0x38/0x40
rest_init+0x268/0x388
start_kernel+0x748/0x790
start_here_common+0x1c/0x614
Which happens because by the time we get to rtas_stop_self() we are
already offline. In addition the message can be spammy, and is not that
helpful for users, so remove it.
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
arch/powerpc/platforms/pseries/hotplug-cpu.c | 3 ---
1 file changed, 3 deletions(-)
diff --git a/arch/powerpc/platforms/pseries/hotplug-cpu.c b/arch/powerpc/platforms/pseries/hotplug-cpu.c
index bbda646b63b5..210e6f563eb4 100644
--- a/arch/powerpc/platforms/pseries/hotplug-cpu.c
+++ b/arch/powerpc/platforms/pseries/hotplug-cpu.c
@@ -91,9 +91,6 @@ static void rtas_stop_self(void)
BUG_ON(rtas_stop_self_token == RTAS_UNKNOWN_SERVICE);
- printk("cpu %u (hwid %u) Ready to die...\n",
- smp_processor_id(), hard_smp_processor_id());
-
rtas_call_unlocked(&args, rtas_stop_self_token, 0, 1, NULL);
panic("Alas, I survived.\n");
--
2.30.2
From: Lee Gibson <[email protected]>
[ Upstream commit 130f634da1af649205f4a3dd86cbe5c126b57914 ]
Function qtnf_event_handle_external_auth calls memcpy without
checking the length.
A user could control that length and trigger a buffer overflow.
Fix by checking the length is within the maximum allowed size.
Signed-off-by: Lee Gibson <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/quantenna/qtnfmac/event.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/drivers/net/wireless/quantenna/qtnfmac/event.c b/drivers/net/wireless/quantenna/qtnfmac/event.c
index 7846383c8828..3f24dbdae8d0 100644
--- a/drivers/net/wireless/quantenna/qtnfmac/event.c
+++ b/drivers/net/wireless/quantenna/qtnfmac/event.c
@@ -599,8 +599,10 @@ qtnf_event_handle_external_auth(struct qtnf_vif *vif,
return 0;
if (ev->ssid_len) {
- memcpy(auth.ssid.ssid, ev->ssid, ev->ssid_len);
- auth.ssid.ssid_len = ev->ssid_len;
+ int len = clamp_val(ev->ssid_len, 0, IEEE80211_MAX_SSID_LEN);
+
+ memcpy(auth.ssid.ssid, ev->ssid, len);
+ auth.ssid.ssid_len = len;
}
auth.key_mgmt_suite = le32_to_cpu(ev->akm_suite);
--
2.30.2
From: Alexey Kardashevskiy <[email protected]>
[ Upstream commit cc7130bf119add37f36238343a593b71ef6ecc1e ]
The IOMMU table is divided into pools for concurrent mappings and each
pool has a separate spinlock. When taking the ownership of an IOMMU group
to pass through a device to a VM, we lock these spinlocks which triggers
a false negative warning in lockdep (below).
This fixes it by annotating the large pool's spinlock as a nest lock
which makes lockdep not complaining when locking nested locks if
the nest lock is locked already.
===
WARNING: possible recursive locking detected
5.11.0-le_syzkaller_a+fstn1 #100 Not tainted
--------------------------------------------
qemu-system-ppc/4129 is trying to acquire lock:
c0000000119bddb0 (&(p->lock)/1){....}-{2:2}, at: iommu_take_ownership+0xac/0x1e0
but task is already holding lock:
c0000000119bdd30 (&(p->lock)/1){....}-{2:2}, at: iommu_take_ownership+0xac/0x1e0
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(&(p->lock)/1);
lock(&(p->lock)/1);
===
Signed-off-by: Alexey Kardashevskiy <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
arch/powerpc/kernel/iommu.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/powerpc/kernel/iommu.c b/arch/powerpc/kernel/iommu.c
index 9704f3f76e63..d7d42bd448c4 100644
--- a/arch/powerpc/kernel/iommu.c
+++ b/arch/powerpc/kernel/iommu.c
@@ -1057,7 +1057,7 @@ int iommu_take_ownership(struct iommu_table *tbl)
spin_lock_irqsave(&tbl->large_pool.lock, flags);
for (i = 0; i < tbl->nr_pools; i++)
- spin_lock(&tbl->pools[i].lock);
+ spin_lock_nest_lock(&tbl->pools[i].lock, &tbl->large_pool.lock);
iommu_table_release_pages(tbl);
@@ -1085,7 +1085,7 @@ void iommu_release_ownership(struct iommu_table *tbl)
spin_lock_irqsave(&tbl->large_pool.lock, flags);
for (i = 0; i < tbl->nr_pools; i++)
- spin_lock(&tbl->pools[i].lock);
+ spin_lock_nest_lock(&tbl->pools[i].lock, &tbl->large_pool.lock);
memset(tbl->it_map, 0, sz);
--
2.30.2
From: Gustavo A. R. Silva <[email protected]>
[ Upstream commit bb43e5718d8f1b46e7a77e7b39be3c691f293050 ]
Fix the following out-of-bounds warnings by adding a new structure
wl3501_req instead of duplicating the same members in structure
wl3501_join_req and wl3501_scan_confirm:
arch/x86/include/asm/string_32.h:182:25: warning: '__builtin_memcpy' offset [39, 108] from the object at 'sig' is out of the bounds of referenced subobject 'beacon_period' with type 'short unsigned int' at offset 36 [-Warray-bounds]
arch/x86/include/asm/string_32.h:182:25: warning: '__builtin_memcpy' offset [25, 95] from the object at 'sig' is out of the bounds of referenced subobject 'beacon_period' with type 'short unsigned int' at offset 22 [-Warray-bounds]
Refactor the code, accordingly:
$ pahole -C wl3501_req drivers/net/wireless/wl3501_cs.o
struct wl3501_req {
u16 beacon_period; /* 0 2 */
u16 dtim_period; /* 2 2 */
u16 cap_info; /* 4 2 */
u8 bss_type; /* 6 1 */
u8 bssid[6]; /* 7 6 */
struct iw_mgmt_essid_pset ssid; /* 13 34 */
struct iw_mgmt_ds_pset ds_pset; /* 47 3 */
struct iw_mgmt_cf_pset cf_pset; /* 50 8 */
struct iw_mgmt_ibss_pset ibss_pset; /* 58 4 */
struct iw_mgmt_data_rset bss_basic_rset; /* 62 10 */
/* size: 72, cachelines: 2, members: 10 */
/* last cacheline: 8 bytes */
};
$ pahole -C wl3501_join_req drivers/net/wireless/wl3501_cs.o
struct wl3501_join_req {
u16 next_blk; /* 0 2 */
u8 sig_id; /* 2 1 */
u8 reserved; /* 3 1 */
struct iw_mgmt_data_rset operational_rset; /* 4 10 */
u16 reserved2; /* 14 2 */
u16 timeout; /* 16 2 */
u16 probe_delay; /* 18 2 */
u8 timestamp[8]; /* 20 8 */
u8 local_time[8]; /* 28 8 */
struct wl3501_req req; /* 36 72 */
/* size: 108, cachelines: 2, members: 10 */
/* last cacheline: 44 bytes */
};
$ pahole -C wl3501_scan_confirm drivers/net/wireless/wl3501_cs.o
struct wl3501_scan_confirm {
u16 next_blk; /* 0 2 */
u8 sig_id; /* 2 1 */
u8 reserved; /* 3 1 */
u16 status; /* 4 2 */
char timestamp[8]; /* 6 8 */
char localtime[8]; /* 14 8 */
struct wl3501_req req; /* 22 72 */
/* --- cacheline 1 boundary (64 bytes) was 30 bytes ago --- */
u8 rssi; /* 94 1 */
/* size: 96, cachelines: 2, members: 8 */
/* padding: 1 */
/* last cacheline: 32 bytes */
};
The problem is that the original code is trying to copy data into a
bunch of struct members adjacent to each other in a single call to
memcpy(). Now that a new struct wl3501_req enclosing all those adjacent
members is introduced, memcpy() doesn't overrun the length of
&sig.beacon_period and &this->bss_set[i].beacon_period, because the
address of the new struct object _req_ is used as the destination,
instead.
This helps with the ongoing efforts to globally enable -Warray-bounds
and get us closer to being able to tighten the FORTIFY_SOURCE routines
on memcpy().
Link: https://github.com/KSPP/linux/issues/109
Reported-by: kernel test robot <[email protected]>
Signed-off-by: Gustavo A. R. Silva <[email protected]>
Reviewed-by: Kees Cook <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/1fbaf516da763b50edac47d792a9145aa4482e29.1618442265.git.gustavoars@kernel.org
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/wl3501.h | 35 +++++++++++--------------
drivers/net/wireless/wl3501_cs.c | 44 +++++++++++++++++---------------
2 files changed, 38 insertions(+), 41 deletions(-)
diff --git a/drivers/net/wireless/wl3501.h b/drivers/net/wireless/wl3501.h
index 077a934ae3b5..a10ee5a68012 100644
--- a/drivers/net/wireless/wl3501.h
+++ b/drivers/net/wireless/wl3501.h
@@ -379,16 +379,7 @@ struct wl3501_get_confirm {
u8 mib_value[100];
};
-struct wl3501_join_req {
- u16 next_blk;
- u8 sig_id;
- u8 reserved;
- struct iw_mgmt_data_rset operational_rset;
- u16 reserved2;
- u16 timeout;
- u16 probe_delay;
- u8 timestamp[8];
- u8 local_time[8];
+struct wl3501_req {
u16 beacon_period;
u16 dtim_period;
u16 cap_info;
@@ -401,6 +392,19 @@ struct wl3501_join_req {
struct iw_mgmt_data_rset bss_basic_rset;
};
+struct wl3501_join_req {
+ u16 next_blk;
+ u8 sig_id;
+ u8 reserved;
+ struct iw_mgmt_data_rset operational_rset;
+ u16 reserved2;
+ u16 timeout;
+ u16 probe_delay;
+ u8 timestamp[8];
+ u8 local_time[8];
+ struct wl3501_req req;
+};
+
struct wl3501_join_confirm {
u16 next_blk;
u8 sig_id;
@@ -443,16 +447,7 @@ struct wl3501_scan_confirm {
u16 status;
char timestamp[8];
char localtime[8];
- u16 beacon_period;
- u16 dtim_period;
- u16 cap_info;
- u8 bss_type;
- u8 bssid[ETH_ALEN];
- struct iw_mgmt_essid_pset ssid;
- struct iw_mgmt_ds_pset ds_pset;
- struct iw_mgmt_cf_pset cf_pset;
- struct iw_mgmt_ibss_pset ibss_pset;
- struct iw_mgmt_data_rset bss_basic_rset;
+ struct wl3501_req req;
u8 rssi;
};
diff --git a/drivers/net/wireless/wl3501_cs.c b/drivers/net/wireless/wl3501_cs.c
index 96eb69678855..122d36439319 100644
--- a/drivers/net/wireless/wl3501_cs.c
+++ b/drivers/net/wireless/wl3501_cs.c
@@ -590,7 +590,7 @@ static int wl3501_mgmt_join(struct wl3501_card *this, u16 stas)
struct wl3501_join_req sig = {
.sig_id = WL3501_SIG_JOIN_REQ,
.timeout = 10,
- .ds_pset = {
+ .req.ds_pset = {
.el = {
.id = IW_MGMT_INFO_ELEMENT_DS_PARAMETER_SET,
.len = 1,
@@ -599,7 +599,7 @@ static int wl3501_mgmt_join(struct wl3501_card *this, u16 stas)
},
};
- memcpy(&sig.beacon_period, &this->bss_set[stas].beacon_period, 72);
+ memcpy(&sig.req, &this->bss_set[stas].req, sizeof(sig.req));
return wl3501_esbq_exec(this, &sig, sizeof(sig));
}
@@ -667,35 +667,37 @@ static void wl3501_mgmt_scan_confirm(struct wl3501_card *this, u16 addr)
if (sig.status == WL3501_STATUS_SUCCESS) {
pr_debug("success");
if ((this->net_type == IW_MODE_INFRA &&
- (sig.cap_info & WL3501_MGMT_CAPABILITY_ESS)) ||
+ (sig.req.cap_info & WL3501_MGMT_CAPABILITY_ESS)) ||
(this->net_type == IW_MODE_ADHOC &&
- (sig.cap_info & WL3501_MGMT_CAPABILITY_IBSS)) ||
+ (sig.req.cap_info & WL3501_MGMT_CAPABILITY_IBSS)) ||
this->net_type == IW_MODE_AUTO) {
if (!this->essid.el.len)
matchflag = 1;
else if (this->essid.el.len == 3 &&
!memcmp(this->essid.essid, "ANY", 3))
matchflag = 1;
- else if (this->essid.el.len != sig.ssid.el.len)
+ else if (this->essid.el.len != sig.req.ssid.el.len)
matchflag = 0;
- else if (memcmp(this->essid.essid, sig.ssid.essid,
+ else if (memcmp(this->essid.essid, sig.req.ssid.essid,
this->essid.el.len))
matchflag = 0;
else
matchflag = 1;
if (matchflag) {
for (i = 0; i < this->bss_cnt; i++) {
- if (ether_addr_equal_unaligned(this->bss_set[i].bssid, sig.bssid)) {
+ if (ether_addr_equal_unaligned(this->bss_set[i].req.bssid,
+ sig.req.bssid)) {
matchflag = 0;
break;
}
}
}
if (matchflag && (i < 20)) {
- memcpy(&this->bss_set[i].beacon_period,
- &sig.beacon_period, 73);
+ memcpy(&this->bss_set[i].req,
+ &sig.req, sizeof(sig.req));
this->bss_cnt++;
this->rssi = sig.rssi;
+ this->bss_set[i].rssi = sig.rssi;
}
}
} else if (sig.status == WL3501_STATUS_TIMEOUT) {
@@ -887,19 +889,19 @@ static void wl3501_mgmt_join_confirm(struct net_device *dev, u16 addr)
if (this->join_sta_bss < this->bss_cnt) {
const int i = this->join_sta_bss;
memcpy(this->bssid,
- this->bss_set[i].bssid, ETH_ALEN);
- this->chan = this->bss_set[i].ds_pset.chan;
+ this->bss_set[i].req.bssid, ETH_ALEN);
+ this->chan = this->bss_set[i].req.ds_pset.chan;
iw_copy_mgmt_info_element(&this->keep_essid.el,
- &this->bss_set[i].ssid.el);
+ &this->bss_set[i].req.ssid.el);
wl3501_mgmt_auth(this);
}
} else {
const int i = this->join_sta_bss;
- memcpy(&this->bssid, &this->bss_set[i].bssid, ETH_ALEN);
- this->chan = this->bss_set[i].ds_pset.chan;
+ memcpy(&this->bssid, &this->bss_set[i].req.bssid, ETH_ALEN);
+ this->chan = this->bss_set[i].req.ds_pset.chan;
iw_copy_mgmt_info_element(&this->keep_essid.el,
- &this->bss_set[i].ssid.el);
+ &this->bss_set[i].req.ssid.el);
wl3501_online(dev);
}
} else {
@@ -1575,30 +1577,30 @@ static int wl3501_get_scan(struct net_device *dev, struct iw_request_info *info,
for (i = 0; i < this->bss_cnt; ++i) {
iwe.cmd = SIOCGIWAP;
iwe.u.ap_addr.sa_family = ARPHRD_ETHER;
- memcpy(iwe.u.ap_addr.sa_data, this->bss_set[i].bssid, ETH_ALEN);
+ memcpy(iwe.u.ap_addr.sa_data, this->bss_set[i].req.bssid, ETH_ALEN);
current_ev = iwe_stream_add_event(info, current_ev,
extra + IW_SCAN_MAX_DATA,
&iwe, IW_EV_ADDR_LEN);
iwe.cmd = SIOCGIWESSID;
iwe.u.data.flags = 1;
- iwe.u.data.length = this->bss_set[i].ssid.el.len;
+ iwe.u.data.length = this->bss_set[i].req.ssid.el.len;
current_ev = iwe_stream_add_point(info, current_ev,
extra + IW_SCAN_MAX_DATA,
&iwe,
- this->bss_set[i].ssid.essid);
+ this->bss_set[i].req.ssid.essid);
iwe.cmd = SIOCGIWMODE;
- iwe.u.mode = this->bss_set[i].bss_type;
+ iwe.u.mode = this->bss_set[i].req.bss_type;
current_ev = iwe_stream_add_event(info, current_ev,
extra + IW_SCAN_MAX_DATA,
&iwe, IW_EV_UINT_LEN);
iwe.cmd = SIOCGIWFREQ;
- iwe.u.freq.m = this->bss_set[i].ds_pset.chan;
+ iwe.u.freq.m = this->bss_set[i].req.ds_pset.chan;
iwe.u.freq.e = 0;
current_ev = iwe_stream_add_event(info, current_ev,
extra + IW_SCAN_MAX_DATA,
&iwe, IW_EV_FREQ_LEN);
iwe.cmd = SIOCGIWENCODE;
- if (this->bss_set[i].cap_info & WL3501_MGMT_CAPABILITY_PRIVACY)
+ if (this->bss_set[i].req.cap_info & WL3501_MGMT_CAPABILITY_PRIVACY)
iwe.u.data.flags = IW_ENCODE_ENABLED | IW_ENCODE_NOKEY;
else
iwe.u.data.flags = IW_ENCODE_DISABLED;
--
2.30.2
From: Yonghong Song <[email protected]>
[ Upstream commit 26e6dd1072763cd5696b75994c03982dde952ad9 ]
selftests/bpf/Makefile includes lib.mk. With the following command
make -j60 LLVM=1 LLVM_IAS=1 <=== compile kernel
make -j60 -C tools/testing/selftests/bpf LLVM=1 LLVM_IAS=1 V=1
some files are still compiled with gcc. This patch
fixed lib.mk issue which sets CC to gcc in all cases.
Signed-off-by: Yonghong Song <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
Acked-by: Andrii Nakryiko <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
tools/testing/selftests/lib.mk | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/tools/testing/selftests/lib.mk b/tools/testing/selftests/lib.mk
index 3ed0134a764d..67386aa3f31d 100644
--- a/tools/testing/selftests/lib.mk
+++ b/tools/testing/selftests/lib.mk
@@ -1,6 +1,10 @@
# This mimics the top-level Makefile. We do it explicitly here so that this
# Makefile can operate with or without the kbuild infrastructure.
+ifneq ($(LLVM),)
+CC := clang
+else
CC := $(CROSS_COMPILE)gcc
+endif
ifeq (0,$(MAKELEVEL))
ifeq ($(OUTPUT),)
--
2.30.2
From: Michael Chan <[email protected]>
[ Upstream commit 7fbf359bb2c19c824cbb1954020680824f6ee5a5 ]
Support VF device IDs used by the Hyper-V hypervisor.
Reviewed-by: Vasundhara Volam <[email protected]>
Reviewed-by: Andy Gospodarek <[email protected]>
Signed-off-by: Edwin Peer <[email protected]>
Signed-off-by: Michael Chan <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/broadcom/bnxt/bnxt.c | 19 ++++++++++++++++++-
1 file changed, 18 insertions(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.c b/drivers/net/ethernet/broadcom/bnxt/bnxt.c
index 588389697cf9..106f2b2ce17f 100644
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt.c
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.c
@@ -125,7 +125,10 @@ enum board_idx {
NETXTREME_E_VF,
NETXTREME_C_VF,
NETXTREME_S_VF,
+ NETXTREME_C_VF_HV,
+ NETXTREME_E_VF_HV,
NETXTREME_E_P5_VF,
+ NETXTREME_E_P5_VF_HV,
};
/* indexed by enum above */
@@ -173,7 +176,10 @@ static const struct {
[NETXTREME_E_VF] = { "Broadcom NetXtreme-E Ethernet Virtual Function" },
[NETXTREME_C_VF] = { "Broadcom NetXtreme-C Ethernet Virtual Function" },
[NETXTREME_S_VF] = { "Broadcom NetXtreme-S Ethernet Virtual Function" },
+ [NETXTREME_C_VF_HV] = { "Broadcom NetXtreme-C Virtual Function for Hyper-V" },
+ [NETXTREME_E_VF_HV] = { "Broadcom NetXtreme-E Virtual Function for Hyper-V" },
[NETXTREME_E_P5_VF] = { "Broadcom BCM5750X NetXtreme-E Ethernet Virtual Function" },
+ [NETXTREME_E_P5_VF_HV] = { "Broadcom BCM5750X NetXtreme-E Virtual Function for Hyper-V" },
};
static const struct pci_device_id bnxt_pci_tbl[] = {
@@ -225,15 +231,25 @@ static const struct pci_device_id bnxt_pci_tbl[] = {
{ PCI_VDEVICE(BROADCOM, 0xd804), .driver_data = BCM58804 },
#ifdef CONFIG_BNXT_SRIOV
{ PCI_VDEVICE(BROADCOM, 0x1606), .driver_data = NETXTREME_E_VF },
+ { PCI_VDEVICE(BROADCOM, 0x1607), .driver_data = NETXTREME_E_VF_HV },
+ { PCI_VDEVICE(BROADCOM, 0x1608), .driver_data = NETXTREME_E_VF_HV },
{ PCI_VDEVICE(BROADCOM, 0x1609), .driver_data = NETXTREME_E_VF },
+ { PCI_VDEVICE(BROADCOM, 0x16bd), .driver_data = NETXTREME_E_VF_HV },
{ PCI_VDEVICE(BROADCOM, 0x16c1), .driver_data = NETXTREME_E_VF },
+ { PCI_VDEVICE(BROADCOM, 0x16c2), .driver_data = NETXTREME_C_VF_HV },
+ { PCI_VDEVICE(BROADCOM, 0x16c3), .driver_data = NETXTREME_C_VF_HV },
+ { PCI_VDEVICE(BROADCOM, 0x16c4), .driver_data = NETXTREME_E_VF_HV },
+ { PCI_VDEVICE(BROADCOM, 0x16c5), .driver_data = NETXTREME_E_VF_HV },
{ PCI_VDEVICE(BROADCOM, 0x16cb), .driver_data = NETXTREME_C_VF },
{ PCI_VDEVICE(BROADCOM, 0x16d3), .driver_data = NETXTREME_E_VF },
{ PCI_VDEVICE(BROADCOM, 0x16dc), .driver_data = NETXTREME_E_VF },
{ PCI_VDEVICE(BROADCOM, 0x16e1), .driver_data = NETXTREME_C_VF },
{ PCI_VDEVICE(BROADCOM, 0x16e5), .driver_data = NETXTREME_C_VF },
+ { PCI_VDEVICE(BROADCOM, 0x16e6), .driver_data = NETXTREME_C_VF_HV },
{ PCI_VDEVICE(BROADCOM, 0x1806), .driver_data = NETXTREME_E_P5_VF },
{ PCI_VDEVICE(BROADCOM, 0x1807), .driver_data = NETXTREME_E_P5_VF },
+ { PCI_VDEVICE(BROADCOM, 0x1808), .driver_data = NETXTREME_E_P5_VF_HV },
+ { PCI_VDEVICE(BROADCOM, 0x1809), .driver_data = NETXTREME_E_P5_VF_HV },
{ PCI_VDEVICE(BROADCOM, 0xd800), .driver_data = NETXTREME_S_VF },
#endif
{ 0 }
@@ -263,7 +279,8 @@ static struct workqueue_struct *bnxt_pf_wq;
static bool bnxt_vf_pciid(enum board_idx idx)
{
return (idx == NETXTREME_C_VF || idx == NETXTREME_E_VF ||
- idx == NETXTREME_S_VF || idx == NETXTREME_E_P5_VF);
+ idx == NETXTREME_S_VF || idx == NETXTREME_C_VF_HV ||
+ idx == NETXTREME_E_VF_HV || idx == NETXTREME_E_P5_VF);
}
#define DB_CP_REARM_FLAGS (DB_KEY_CP | DB_IDX_VALID)
--
2.30.2
From: Jia-Ju Bai <[email protected]>
[ Upstream commit 45c7eaeb29d67224db4ba935deb575586a1fda09 ]
When kcalloc() returns NULL to __tcbp or of_count_phandle_with_args()
returns zero or -ENOENT to count, no error return code of
thermal_of_populate_bind_params() is assigned.
To fix these bugs, ret is assigned with -ENOMEM and -ENOENT in these
cases, respectively.
Fixes: a92bab8919e3 ("of: thermal: Allow multiple devices to share cooling map")
Reported-by: TOTE Robot <[email protected]>
Signed-off-by: Jia-Ju Bai <[email protected]>
Signed-off-by: Daniel Lezcano <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/thermal/of-thermal.c | 7 +++++--
1 file changed, 5 insertions(+), 2 deletions(-)
diff --git a/drivers/thermal/of-thermal.c b/drivers/thermal/of-thermal.c
index dc5093be553e..68d0c181ec7b 100644
--- a/drivers/thermal/of-thermal.c
+++ b/drivers/thermal/of-thermal.c
@@ -712,14 +712,17 @@ static int thermal_of_populate_bind_params(struct device_node *np,
count = of_count_phandle_with_args(np, "cooling-device",
"#cooling-cells");
- if (!count) {
+ if (count <= 0) {
pr_err("Add a cooling_device property with at least one device\n");
+ ret = -ENOENT;
goto end;
}
__tcbp = kcalloc(count, sizeof(*__tcbp), GFP_KERNEL);
- if (!__tcbp)
+ if (!__tcbp) {
+ ret = -ENOMEM;
goto end;
+ }
for (i = 0; i < count; i++) {
ret = of_parse_phandle_with_args(np, "cooling-device",
--
2.30.2
From: Felix Fietkau <[email protected]>
[ Upstream commit 3f57d8c40fea9b20543cab4da12f4680d2ef182c ]
The VLAN ID in the rx descriptor is only valid if the RX_DMA_VTAG bit is
set. Fixes frames wrongly marked with VLAN tags.
Signed-off-by: Felix Fietkau <[email protected]>
[Ilya: fix commit message]
Signed-off-by: Ilya Lipnitskiy <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/mediatek/mtk_eth_soc.c | 2 +-
drivers/net/ethernet/mediatek/mtk_eth_soc.h | 1 +
2 files changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/mediatek/mtk_eth_soc.c b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
index d01b3a1b40f4..7e3806fd70b2 100644
--- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c
+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
@@ -1315,7 +1315,7 @@ static int mtk_poll_rx(struct napi_struct *napi, int budget,
skb->protocol = eth_type_trans(skb, netdev);
if (netdev->features & NETIF_F_HW_VLAN_CTAG_RX &&
- RX_DMA_VID(trxd.rxd3))
+ (trxd.rxd2 & RX_DMA_VTAG))
__vlan_hwaccel_put_tag(skb, htons(ETH_P_8021Q),
RX_DMA_VID(trxd.rxd3));
skb_record_rx_queue(skb, 0);
diff --git a/drivers/net/ethernet/mediatek/mtk_eth_soc.h b/drivers/net/ethernet/mediatek/mtk_eth_soc.h
index 1e787f3577aa..1e9202b34d35 100644
--- a/drivers/net/ethernet/mediatek/mtk_eth_soc.h
+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.h
@@ -293,6 +293,7 @@
#define RX_DMA_LSO BIT(30)
#define RX_DMA_PLEN0(_x) (((_x) & 0x3fff) << 16)
#define RX_DMA_GET_PLEN0(_x) (((_x) >> 16) & 0x3fff)
+#define RX_DMA_VTAG BIT(15)
/* QDMA descriptor rxd3 */
#define RX_DMA_VID(_x) ((_x) & 0xfff)
--
2.30.2
From: Stefan Assmann <[email protected]>
[ Upstream commit 1a0e880b028f97478dc689e2900b312741d0d772 ]
Both iavf_free_all_tx_resources() and iavf_free_all_rx_resources() have
already been called in the very same function.
Remove the duplicate calls.
Signed-off-by: Stefan Assmann <[email protected]>
Signed-off-by: Tony Nguyen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/intel/iavf/iavf_main.c | 2 --
1 file changed, 2 deletions(-)
diff --git a/drivers/net/ethernet/intel/iavf/iavf_main.c b/drivers/net/ethernet/intel/iavf/iavf_main.c
index cffc8c1044f2..a97e1f9ca1ed 100644
--- a/drivers/net/ethernet/intel/iavf/iavf_main.c
+++ b/drivers/net/ethernet/intel/iavf/iavf_main.c
@@ -3906,8 +3906,6 @@ static void iavf_remove(struct pci_dev *pdev)
iounmap(hw->hw_addr);
pci_release_regions(pdev);
- iavf_free_all_tx_resources(adapter);
- iavf_free_all_rx_resources(adapter);
iavf_free_queues(adapter);
kfree(adapter->vf_res);
spin_lock_bh(&adapter->mac_vlan_list_lock);
--
2.30.2
From: Pali Rohár <[email protected]>
[ Upstream commit 1e83130f01b04c16579ed5a5e03d729bcffc4c5d ]
IRQ domain alloc function should return zero on success. Non-zero value
indicates failure.
Link: https://lore.kernel.org/r/[email protected]
Fixes: fc54bae28818 ("PCI: iproc: Allow allocation of multiple MSIs")
Signed-off-by: Pali Rohár <[email protected]>
Signed-off-by: Lorenzo Pieralisi <[email protected]>
Reviewed-by: Krzysztof Wilczyński <[email protected]>
Acked-by: Ray Jui <[email protected]>
Acked-by: Marc Zyngier <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/pci/controller/pcie-iproc-msi.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/pci/controller/pcie-iproc-msi.c b/drivers/pci/controller/pcie-iproc-msi.c
index a1298f6784ac..f40d17b285c5 100644
--- a/drivers/pci/controller/pcie-iproc-msi.c
+++ b/drivers/pci/controller/pcie-iproc-msi.c
@@ -271,7 +271,7 @@ static int iproc_msi_irq_domain_alloc(struct irq_domain *domain,
NULL, NULL);
}
- return hwirq;
+ return 0;
}
static void iproc_msi_irq_domain_free(struct irq_domain *domain,
--
2.30.2
From: Colin Ian King <[email protected]>
[ Upstream commit 28e18ee636ba28532dbe425540af06245a0bbecb ]
The uninitialized variable dn.node_changed does not get set when a
call to f2fs_get_node_page fails. This uninitialized value gets used
in the call to f2fs_balance_fs() that may or not may not balances
dirty node and dentry pages depending on the uninitialized state of
the variable. Fix this by only calling f2fs_balance_fs if err is
not set.
Thanks to Jaegeuk Kim for suggesting an appropriate fix.
Addresses-Coverity: ("Uninitialized scalar variable")
Fixes: 2a3407607028 ("f2fs: call f2fs_balance_fs only when node was changed")
Signed-off-by: Colin Ian King <[email protected]>
Reviewed-by: Chao Yu <[email protected]>
Signed-off-by: Jaegeuk Kim <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/f2fs/inline.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/fs/f2fs/inline.c b/fs/f2fs/inline.c
index cbd17e4ff920..c6bd669f4b4e 100644
--- a/fs/f2fs/inline.c
+++ b/fs/f2fs/inline.c
@@ -216,7 +216,8 @@ out:
f2fs_put_page(page, 1);
- f2fs_balance_fs(sbi, dn.node_changed);
+ if (!err)
+ f2fs_balance_fs(sbi, dn.node_changed);
return err;
}
--
2.30.2
From: Dmitry Baryshkov <[email protected]>
[ Upstream commit c99e755a4a4c165cad6effb39faffd0f3377c02d ]
In pci_scan_device(), if pci_setup_device() fails for any reason, the code
will not release device's of_node by calling pci_release_of_node(). Fix
that by calling the release function.
Fixes: 98d9f30c820d ("pci/of: Match PCI devices to OF nodes dynamically")
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Dmitry Baryshkov <[email protected]>
Signed-off-by: Bjorn Helgaas <[email protected]>
Reviewed-by: Leon Romanovsky <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/pci/probe.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
index 8fa13486f2f1..f28213b62527 100644
--- a/drivers/pci/probe.c
+++ b/drivers/pci/probe.c
@@ -2299,6 +2299,7 @@ static struct pci_dev *pci_scan_device(struct pci_bus *bus, int devfn)
pci_set_of_node(dev);
if (pci_setup_device(dev)) {
+ pci_release_of_node(dev);
pci_bus_put(dev->bus);
kfree(dev);
return NULL;
--
2.30.2
From: Zhen Lei <[email protected]>
[ Upstream commit a506bd5756290821a4314f502b4bafc2afcf5260 ]
The commit 1879445dfa7b ("perf/core: Set event's default
::overflow_handler()") set a default event->overflow_handler in
perf_event_alloc(), and replace the check event->overflow_handler with
is_default_overflow_handler(), but one is missing.
Currently, the bp->overflow_handler can not be NULL. As a result,
enable_single_step() is always not invoked.
Comments from Zhen Lei:
https://patchwork.kernel.org/project/linux-arm-kernel/patch/[email protected]/
Fixes: 1879445dfa7b ("perf/core: Set event's default ::overflow_handler()")
Signed-off-by: Zhen Lei <[email protected]>
Cc: Wang Nan <[email protected]>
Acked-by: Will Deacon <[email protected]>
Signed-off-by: Russell King <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm/kernel/hw_breakpoint.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/kernel/hw_breakpoint.c b/arch/arm/kernel/hw_breakpoint.c
index 7021ef0b4e71..b06d9ea07c84 100644
--- a/arch/arm/kernel/hw_breakpoint.c
+++ b/arch/arm/kernel/hw_breakpoint.c
@@ -883,7 +883,7 @@ static void breakpoint_handler(unsigned long unknown, struct pt_regs *regs)
info->trigger = addr;
pr_debug("breakpoint fired: address = 0x%x\n", addr);
perf_bp_event(bp, regs);
- if (!bp->overflow_handler)
+ if (is_default_overflow_handler(bp))
enable_single_step(bp, addr);
goto unlock;
}
--
2.30.2
From: Jia-Ju Bai <[email protected]>
[ Upstream commit 26594c6bbb60c6bc87e3762a86ceece57d164c66 ]
When idr_find() returns NULL to intent, no error return code of
qcom_glink_rx_data() is assigned.
To fix this bug, ret is assigned with -ENOENT in this case.
Fixes: 64f95f87920d ("rpmsg: glink: Use the local intents when receiving data")
Reported-by: TOTE Robot <[email protected]>
Signed-off-by: Jia-Ju Bai <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Bjorn Andersson <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/rpmsg/qcom_glink_native.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/rpmsg/qcom_glink_native.c b/drivers/rpmsg/qcom_glink_native.c
index d5114abcde19..0f10b3f84705 100644
--- a/drivers/rpmsg/qcom_glink_native.c
+++ b/drivers/rpmsg/qcom_glink_native.c
@@ -857,6 +857,7 @@ static int qcom_glink_rx_data(struct qcom_glink *glink, size_t avail)
dev_err(glink->dev,
"no intent found for channel %s intent %d",
channel->name, liid);
+ ret = -ENOENT;
goto advance_rx;
}
}
--
2.30.2
From: Trond Myklebust <[email protected]>
[ Upstream commit 9fdbfad1777cb4638f489eeb62d85432010c0031 ]
We need to use unsigned long subtraction and then convert to signed in
order to deal correcly with C overflow rules.
Fixes: f5062003465c ("NFS: Set an attribute barrier on all updates")
Signed-off-by: Trond Myklebust <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/nfs/inode.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/fs/nfs/inode.c b/fs/nfs/inode.c
index 53604cc090ca..8c0f916380c4 100644
--- a/fs/nfs/inode.c
+++ b/fs/nfs/inode.c
@@ -1618,10 +1618,10 @@ EXPORT_SYMBOL_GPL(_nfs_display_fhandle);
*/
static int nfs_inode_attrs_need_update(const struct inode *inode, const struct nfs_fattr *fattr)
{
- const struct nfs_inode *nfsi = NFS_I(inode);
+ unsigned long attr_gencount = NFS_I(inode)->attr_gencount;
- return ((long)fattr->gencount - (long)nfsi->attr_gencount) > 0 ||
- ((long)nfsi->attr_gencount - (long)nfs_read_attr_generation_counter() > 0);
+ return (long)(fattr->gencount - attr_gencount) > 0 ||
+ (long)(attr_gencount - nfs_read_attr_generation_counter()) > 0;
}
static int nfs_refresh_inode_locked(struct inode *inode, struct nfs_fattr *fattr)
@@ -2049,7 +2049,7 @@ static int nfs_update_inode(struct inode *inode, struct nfs_fattr *fattr)
nfsi->attrtimeo_timestamp = now;
}
/* Set the barrier to be more recent than this fattr */
- if ((long)fattr->gencount - (long)nfsi->attr_gencount > 0)
+ if ((long)(fattr->gencount - nfsi->attr_gencount) > 0)
nfsi->attr_gencount = fattr->gencount;
}
--
2.30.2
From: Trond Myklebust <[email protected]>
[ Upstream commit 99f23783224355e7022ceea9b8d9f62c0fd01bd8 ]
Whether we're allocating or delallocating space, we should flush out the
pending writes in order to avoid races with attribute updates.
Fixes: 1e564d3dbd68 ("NFSv4.2: Fix a race in nfs42_proc_deallocate()")
Signed-off-by: Trond Myklebust <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/nfs/nfs42proc.c | 16 +++++++++-------
1 file changed, 9 insertions(+), 7 deletions(-)
diff --git a/fs/nfs/nfs42proc.c b/fs/nfs/nfs42proc.c
index 9b61c80a93e9..5c84e5b8c0d6 100644
--- a/fs/nfs/nfs42proc.c
+++ b/fs/nfs/nfs42proc.c
@@ -59,7 +59,8 @@ static int _nfs42_proc_fallocate(struct rpc_message *msg, struct file *filep,
static int nfs42_proc_fallocate(struct rpc_message *msg, struct file *filep,
loff_t offset, loff_t len)
{
- struct nfs_server *server = NFS_SERVER(file_inode(filep));
+ struct inode *inode = file_inode(filep);
+ struct nfs_server *server = NFS_SERVER(inode);
struct nfs4_exception exception = { };
struct nfs_lock_context *lock;
int err;
@@ -68,9 +69,13 @@ static int nfs42_proc_fallocate(struct rpc_message *msg, struct file *filep,
if (IS_ERR(lock))
return PTR_ERR(lock);
- exception.inode = file_inode(filep);
+ exception.inode = inode;
exception.state = lock->open_context->state;
+ err = nfs_sync_inode(inode);
+ if (err)
+ goto out;
+
do {
err = _nfs42_proc_fallocate(msg, filep, lock, offset, len);
if (err == -ENOTSUPP) {
@@ -79,7 +84,7 @@ static int nfs42_proc_fallocate(struct rpc_message *msg, struct file *filep,
}
err = nfs4_handle_exception(server, err, &exception);
} while (exception.retry);
-
+out:
nfs_put_lock_context(lock);
return err;
}
@@ -117,16 +122,13 @@ int nfs42_proc_deallocate(struct file *filep, loff_t offset, loff_t len)
return -EOPNOTSUPP;
inode_lock(inode);
- err = nfs_sync_inode(inode);
- if (err)
- goto out_unlock;
err = nfs42_proc_fallocate(&msg, filep, offset, len);
if (err == 0)
truncate_pagecache_range(inode, offset, (offset + len) -1);
if (err == -EOPNOTSUPP)
NFS_SERVER(inode)->caps &= ~NFS_CAP_DEALLOCATE;
-out_unlock:
+
inode_unlock(inode);
return err;
}
--
2.30.2
From: Yang Yingliang <[email protected]>
[ Upstream commit acaef7981a218813e3617edb9c01837808de063c ]
Add the missing destroy_workqueue() before return from
pci_epf_test_init() in the error handling case and add
destroy_workqueue() in pci_epf_test_exit().
Link: https://lore.kernel.org/r/[email protected]
Fixes: 349e7a85b25fa ("PCI: endpoint: functions: Add an EP function to test PCI")
Reported-by: Hulk Robot <[email protected]>
Signed-off-by: Yang Yingliang <[email protected]>
Signed-off-by: Lorenzo Pieralisi <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/pci/endpoint/functions/pci-epf-test.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/pci/endpoint/functions/pci-epf-test.c b/drivers/pci/endpoint/functions/pci-epf-test.c
index 1cfe3687a211..6dcee39b364a 100644
--- a/drivers/pci/endpoint/functions/pci-epf-test.c
+++ b/drivers/pci/endpoint/functions/pci-epf-test.c
@@ -604,6 +604,7 @@ static int __init pci_epf_test_init(void)
ret = pci_epf_register_driver(&test_driver);
if (ret) {
+ destroy_workqueue(kpcitest_workqueue);
pr_err("Failed to register pci epf test driver --> %d\n", ret);
return ret;
}
@@ -614,6 +615,8 @@ module_init(pci_epf_test_init);
static void __exit pci_epf_test_exit(void)
{
+ if (kpcitest_workqueue)
+ destroy_workqueue(kpcitest_workqueue);
pci_epf_unregister_driver(&test_driver);
}
module_exit(pci_epf_test_exit);
--
2.30.2
From: Olga Kornievskaia <[email protected]>
[ Upstream commit 73f5c88f521a630ea1628beb9c2d48a2e777a419 ]
Currently the client ignores the value of the sr_eof of the SEEK
operation. According to the spec, if the server didn't find the
requested extent and reached the end of the file, the server
would return sr_eof=true. In case the request for DATA and no
data was found (ie in the middle of the hole), then the lseek
expects that ENXIO would be returned.
Fixes: 1c6dcbe5ceff8 ("NFS: Implement SEEK")
Signed-off-by: Olga Kornievskaia <[email protected]>
Signed-off-by: Trond Myklebust <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/nfs/nfs42proc.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/fs/nfs/nfs42proc.c b/fs/nfs/nfs42proc.c
index 5c84e5b8c0d6..6b7c926824ae 100644
--- a/fs/nfs/nfs42proc.c
+++ b/fs/nfs/nfs42proc.c
@@ -500,7 +500,10 @@ static loff_t _nfs42_proc_llseek(struct file *filep,
if (status)
return status;
- return vfs_setpos(filep, res.sr_offset, inode->i_sb->s_maxbytes);
+ if (whence == SEEK_DATA && res.sr_eof)
+ return -NFS4ERR_NXIO;
+ else
+ return vfs_setpos(filep, res.sr_offset, inode->i_sb->s_maxbytes);
}
loff_t nfs42_proc_llseek(struct file *filep, loff_t offset, int whence)
--
2.30.2
From: Nikola Livic <[email protected]>
[ Upstream commit ed34695e15aba74f45247f1ee2cf7e09d449f925 ]
We (adam zabrocki, alexander matrosov, alexander tereshkin, maksym
bazalii) observed the check:
if (fh->size > sizeof(struct nfs_fh))
should not use the size of the nfs_fh struct which includes an extra two
bytes from the size field.
struct nfs_fh {
unsigned short size;
unsigned char data[NFS_MAXFHSIZE];
}
but should determine the size from data[NFS_MAXFHSIZE] so the memcpy
will not write 2 bytes beyond destination. The proposed fix is to
compare against the NFS_MAXFHSIZE directly, as is done elsewhere in fs
code base.
Fixes: d67ae825a59d ("pnfs/flexfiles: Add the FlexFile Layout Driver")
Signed-off-by: Nikola Livic <[email protected]>
Signed-off-by: Dan Carpenter <[email protected]>
Signed-off-by: Trond Myklebust <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/nfs/flexfilelayout/flexfilelayout.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/fs/nfs/flexfilelayout/flexfilelayout.c b/fs/nfs/flexfilelayout/flexfilelayout.c
index 1741d902b0d8..fa1c920afb49 100644
--- a/fs/nfs/flexfilelayout/flexfilelayout.c
+++ b/fs/nfs/flexfilelayout/flexfilelayout.c
@@ -103,7 +103,7 @@ static int decode_nfs_fh(struct xdr_stream *xdr, struct nfs_fh *fh)
if (unlikely(!p))
return -ENOBUFS;
fh->size = be32_to_cpup(p++);
- if (fh->size > sizeof(struct nfs_fh)) {
+ if (fh->size > NFS_MAXFHSIZE) {
printk(KERN_ERR "NFS flexfiles: Too big fh received %d\n",
fh->size);
return -EOVERFLOW;
--
2.30.2
From: Michael Walle <[email protected]>
[ Upstream commit 7fcb86185978661c9188397d474f90364745b8d9 ]
The module doesn't load automatically. Fix it by adding the missing
MODULE_TABLE().
Fixes: 7b0b551dbc1e ("rtc: fsl-ftm-alarm: add FTM alarm driver")
Signed-off-by: Michael Walle <[email protected]>
Signed-off-by: Alexandre Belloni <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/rtc/rtc-fsl-ftm-alarm.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/rtc/rtc-fsl-ftm-alarm.c b/drivers/rtc/rtc-fsl-ftm-alarm.c
index 8df2075af9a2..835695bedaac 100644
--- a/drivers/rtc/rtc-fsl-ftm-alarm.c
+++ b/drivers/rtc/rtc-fsl-ftm-alarm.c
@@ -316,6 +316,7 @@ static const struct of_device_id ftm_rtc_match[] = {
{ .compatible = "fsl,lx2160a-ftm-alarm", },
{ },
};
+MODULE_DEVICE_TABLE(of, ftm_rtc_match);
static struct platform_driver ftm_rtc_driver = {
.probe = ftm_rtc_probe,
--
2.30.2
From: Jeff Layton <[email protected]>
[ Upstream commit 1775c7ddacfcea29051c67409087578f8f4d751b ]
Fixes: 878dabb64117 ("ceph: don't return -ESTALE if there's still an open file")
Signed-off-by: Jeff Layton <[email protected]>
Reviewed-by: Xiubo Li <[email protected]>
Signed-off-by: Ilya Dryomov <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/ceph/export.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/fs/ceph/export.c b/fs/ceph/export.c
index e088843a7734..baa6368bece5 100644
--- a/fs/ceph/export.c
+++ b/fs/ceph/export.c
@@ -178,8 +178,10 @@ static struct dentry *__fh_to_dentry(struct super_block *sb, u64 ino)
return ERR_CAST(inode);
/* We need LINK caps to reliably check i_nlink */
err = ceph_do_getattr(inode, CEPH_CAP_LINK_SHARED, false);
- if (err)
+ if (err) {
+ iput(inode);
return ERR_PTR(err);
+ }
/* -ESTALE if inode as been unlinked and no file is open */
if ((inode->i_nlink == 0) && (atomic_read(&inode->i_count) == 1)) {
iput(inode);
--
2.30.2
From: Yufeng Mo <[email protected]>
[ Upstream commit 2867298dd49ee84214b8721521dc7a5a6382520c ]
According to the UM, the type and enable status of igu_egu_hw_err
should be configured separately. Currently, the type field is
incorrect when disable this error. So fix it by configuring these
two fields separately.
Fixes: bf1faf9415dd ("net: hns3: Add enable and process hw errors from IGU, EGU and NCSI")
Signed-off-by: Yufeng Mo <[email protected]>
Signed-off-by: Huazhong Tan <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_err.c | 3 ++-
drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_err.h | 3 ++-
2 files changed, 4 insertions(+), 2 deletions(-)
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_err.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_err.c
index 87dece0e745d..53fd6e4d9e2d 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_err.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_err.c
@@ -753,8 +753,9 @@ static int hclge_config_igu_egu_hw_err_int(struct hclge_dev *hdev, bool en)
/* configure IGU,EGU error interrupts */
hclge_cmd_setup_basic_desc(&desc, HCLGE_IGU_COMMON_INT_EN, false);
+ desc.data[0] = cpu_to_le32(HCLGE_IGU_ERR_INT_TYPE);
if (en)
- desc.data[0] = cpu_to_le32(HCLGE_IGU_ERR_INT_EN);
+ desc.data[0] |= cpu_to_le32(HCLGE_IGU_ERR_INT_EN);
desc.data[1] = cpu_to_le32(HCLGE_IGU_ERR_INT_EN_MASK);
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_err.h b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_err.h
index 876fd81ad2f1..8eccdb651a3c 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_err.h
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_err.h
@@ -33,7 +33,8 @@
#define HCLGE_TQP_ECC_ERR_INT_EN_MASK 0x0FFF
#define HCLGE_MSIX_SRAM_ECC_ERR_INT_EN_MASK 0x0F000000
#define HCLGE_MSIX_SRAM_ECC_ERR_INT_EN 0x0F000000
-#define HCLGE_IGU_ERR_INT_EN 0x0000066F
+#define HCLGE_IGU_ERR_INT_EN 0x0000000F
+#define HCLGE_IGU_ERR_INT_TYPE 0x00000660
#define HCLGE_IGU_ERR_INT_EN_MASK 0x000F
#define HCLGE_IGU_TNL_ERR_INT_EN 0x0002AABF
#define HCLGE_IGU_TNL_ERR_INT_EN_MASK 0x003F
--
2.30.2
From: Sergei Trofimovich <[email protected]>
[ Upstream commit 99e729bd40fb3272fa4b0140839d5e957b58588a ]
Noticed failure as a crash on ia64 when tried to symbolize all backtraces
collected by page_owner=on:
$ cat /sys/kernel/debug/page_owner
<oops>
CPU: 1 PID: 2074 Comm: cat Not tainted 5.12.0-rc4 #226
Hardware name: hp server rx3600, BIOS 04.03 04/08/2008
ip is at dereference_module_function_descriptor+0x41/0x100
Crash happens at dereference_module_function_descriptor() due to
use-after-free when dereferencing ".opd" section header.
All section headers are already freed after module is laoded successfully.
To keep symbolizer working the change stores ".opd" address and size after
module is relocated to a new place and before section headers are
discarded.
To make similar errors less obscure module_finalize() now zeroes out all
variables relevant to module loading only.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Sergei Trofimovich <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/ia64/include/asm/module.h | 6 +++++-
arch/ia64/kernel/module.c | 29 +++++++++++++++++++++++++----
2 files changed, 30 insertions(+), 5 deletions(-)
diff --git a/arch/ia64/include/asm/module.h b/arch/ia64/include/asm/module.h
index f319144260ce..9fbf32e6e881 100644
--- a/arch/ia64/include/asm/module.h
+++ b/arch/ia64/include/asm/module.h
@@ -14,16 +14,20 @@
struct elf64_shdr; /* forward declration */
struct mod_arch_specific {
+ /* Used only at module load time. */
struct elf64_shdr *core_plt; /* core PLT section */
struct elf64_shdr *init_plt; /* init PLT section */
struct elf64_shdr *got; /* global offset table */
struct elf64_shdr *opd; /* official procedure descriptors */
struct elf64_shdr *unwind; /* unwind-table section */
unsigned long gp; /* global-pointer for module */
+ unsigned int next_got_entry; /* index of next available got entry */
+ /* Used at module run and cleanup time. */
void *core_unw_table; /* core unwind-table cookie returned by unwinder */
void *init_unw_table; /* init unwind-table cookie returned by unwinder */
- unsigned int next_got_entry; /* index of next available got entry */
+ void *opd_addr; /* symbolize uses .opd to get to actual function */
+ unsigned long opd_size;
};
#define MODULE_PROC_FAMILY "ia64"
diff --git a/arch/ia64/kernel/module.c b/arch/ia64/kernel/module.c
index 1a42ba885188..ee693c8cec49 100644
--- a/arch/ia64/kernel/module.c
+++ b/arch/ia64/kernel/module.c
@@ -905,9 +905,31 @@ register_unwind_table (struct module *mod)
int
module_finalize (const Elf_Ehdr *hdr, const Elf_Shdr *sechdrs, struct module *mod)
{
+ struct mod_arch_specific *mas = &mod->arch;
+
DEBUGP("%s: init: entry=%p\n", __func__, mod->init);
- if (mod->arch.unwind)
+ if (mas->unwind)
register_unwind_table(mod);
+
+ /*
+ * ".opd" was already relocated to the final destination. Store
+ * it's address for use in symbolizer.
+ */
+ mas->opd_addr = (void *)mas->opd->sh_addr;
+ mas->opd_size = mas->opd->sh_size;
+
+ /*
+ * Module relocation was already done at this point. Section
+ * headers are about to be deleted. Wipe out load-time context.
+ */
+ mas->core_plt = NULL;
+ mas->init_plt = NULL;
+ mas->got = NULL;
+ mas->opd = NULL;
+ mas->unwind = NULL;
+ mas->gp = 0;
+ mas->next_got_entry = 0;
+
return 0;
}
@@ -926,10 +948,9 @@ module_arch_cleanup (struct module *mod)
void *dereference_module_function_descriptor(struct module *mod, void *ptr)
{
- Elf64_Shdr *opd = mod->arch.opd;
+ struct mod_arch_specific *mas = &mod->arch;
- if (ptr < (void *)opd->sh_addr ||
- ptr >= (void *)(opd->sh_addr + opd->sh_size))
+ if (ptr < mas->opd_addr || ptr >= mas->opd_addr + mas->opd_size)
return ptr;
return dereference_function_descriptor(ptr);
--
2.30.2
From: Nobuhiro Iwamatsu <[email protected]>
[ Upstream commit 204756f016726a380bafe619438ed979088bd04a ]
rx8130 wday specifies the bit position, not BCD.
Fixes: ee0981be7704 ("rtc: ds1307: Add support for Epson RX8130CE")
Signed-off-by: Nobuhiro Iwamatsu <[email protected]>
Signed-off-by: Alexandre Belloni <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/rtc/rtc-ds1307.c | 12 ++++++++++--
1 file changed, 10 insertions(+), 2 deletions(-)
diff --git a/drivers/rtc/rtc-ds1307.c b/drivers/rtc/rtc-ds1307.c
index 1f7e8aefc1eb..99b93f56a2d5 100644
--- a/drivers/rtc/rtc-ds1307.c
+++ b/drivers/rtc/rtc-ds1307.c
@@ -265,7 +265,11 @@ static int ds1307_get_time(struct device *dev, struct rtc_time *t)
t->tm_min = bcd2bin(regs[DS1307_REG_MIN] & 0x7f);
tmp = regs[DS1307_REG_HOUR] & 0x3f;
t->tm_hour = bcd2bin(tmp);
- t->tm_wday = bcd2bin(regs[DS1307_REG_WDAY] & 0x07) - 1;
+ /* rx8130 is bit position, not BCD */
+ if (ds1307->type == rx_8130)
+ t->tm_wday = fls(regs[DS1307_REG_WDAY] & 0x7f);
+ else
+ t->tm_wday = bcd2bin(regs[DS1307_REG_WDAY] & 0x07) - 1;
t->tm_mday = bcd2bin(regs[DS1307_REG_MDAY] & 0x3f);
tmp = regs[DS1307_REG_MONTH] & 0x1f;
t->tm_mon = bcd2bin(tmp) - 1;
@@ -312,7 +316,11 @@ static int ds1307_set_time(struct device *dev, struct rtc_time *t)
regs[DS1307_REG_SECS] = bin2bcd(t->tm_sec);
regs[DS1307_REG_MIN] = bin2bcd(t->tm_min);
regs[DS1307_REG_HOUR] = bin2bcd(t->tm_hour);
- regs[DS1307_REG_WDAY] = bin2bcd(t->tm_wday + 1);
+ /* rx8130 is bit position, not BCD */
+ if (ds1307->type == rx_8130)
+ regs[DS1307_REG_WDAY] = 1 << t->tm_wday;
+ else
+ regs[DS1307_REG_WDAY] = bin2bcd(t->tm_wday + 1);
regs[DS1307_REG_MDAY] = bin2bcd(t->tm_mday);
regs[DS1307_REG_MONTH] = bin2bcd(t->tm_mon + 1);
--
2.30.2
From: Yufeng Mo <[email protected]>
[ Upstream commit 568a54bdf70b143f3e0befa298e22ad469ffc732 ]
The message sent to VF should be initialized, otherwise random
value of some contents may cause improper processing by the target.
So add a initialization to message in hclge_get_link_mode().
Fixes: 9194d18b0577 ("net: hns3: fix the problem that the supported port is empty")
Signed-off-by: Yufeng Mo <[email protected]>
Signed-off-by: Huazhong Tan <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mbx.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mbx.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mbx.c
index f5da28a60d00..23a706a1765a 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mbx.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mbx.c
@@ -455,7 +455,7 @@ static void hclge_get_link_mode(struct hclge_vport *vport,
unsigned long advertising;
unsigned long supported;
unsigned long send_data;
- u8 msg_data[10];
+ u8 msg_data[10] = {};
u8 dest_vfid;
advertising = hdev->hw.mac.advertising[0];
--
2.30.2
From: Jian Shen <[email protected]>
[ Upstream commit b4047aac4ec1066bab6c71950623746d7bcf7154 ]
In some cases, the device is not initialized because reset failed.
If another task calls hns3_reset_notify_up_enet() before reset
retry, it will cause an error since uninitialized pointer access.
So add check for HNS3_NIC_STATE_INITED before calling
hns3_nic_net_open() in hns3_reset_notify_up_enet().
Fixes: bb6b94a896d4 ("net: hns3: Add reset interface implementation in client")
Signed-off-by: Jian Shen <[email protected]>
Signed-off-by: Huazhong Tan <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/hisilicon/hns3/hns3_enet.c | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c
index 696f21543aa7..6b43cbf4f909 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c
@@ -4280,6 +4280,11 @@ static int hns3_reset_notify_up_enet(struct hnae3_handle *handle)
struct hns3_nic_priv *priv = netdev_priv(kinfo->netdev);
int ret = 0;
+ if (!test_bit(HNS3_NIC_STATE_INITED, &priv->state)) {
+ netdev_err(kinfo->netdev, "device is not initialized yet\n");
+ return -EFAULT;
+ }
+
clear_bit(HNS3_NIC_STATE_RESETTING, &priv->state);
if (netif_running(kinfo->netdev)) {
--
2.30.2
From: Peng Li <[email protected]>
[ Upstream commit b416e872be06fdace3c36cf5210130509d0f0e72 ]
Currently, netif_tx_stop_all_queues() is used to ensure that
the xmit is not running, but for the concurrent case it will
not take effect, since netif_tx_stop_all_queues() just sets
a flag without locking to indicate that the xmit queue(s)
should not be run.
So use netif_tx_disable() to replace netif_tx_stop_all_queues(),
it takes the xmit queue lock while marking the queue stopped.
Fixes: 76ad4f0ee747 ("net: hns3: Add support of HNS3 Ethernet Driver for hip08 SoC")
Signed-off-by: Peng Li <[email protected]>
Signed-off-by: Huazhong Tan <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/hisilicon/hns3/hns3_enet.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c
index 3dd3b8047968..5f2948bafff2 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c
@@ -539,8 +539,8 @@ static int hns3_nic_net_stop(struct net_device *netdev)
if (h->ae_algo->ops->set_timer_task)
h->ae_algo->ops->set_timer_task(priv->ae_handle, false);
- netif_tx_stop_all_queues(netdev);
netif_carrier_off(netdev);
+ netif_tx_disable(netdev);
hns3_nic_net_down(netdev);
--
2.30.2
From: Hao Chen <[email protected]>
[ Upstream commit 905416f18fe74bdd4de91bf94ef5a790a36e4b99 ]
When skb->ip_summed is CHECKSUM_PARTIAL, for non-tunnel udp packet,
which has a dest port as the IANA assigned, the hardware is expected
to do the checksum offload, but the hardware whose version is below
V3 will not do the checksum offload when udp dest port is 4790.
So fixes it by doing the checksum in software for this case.
Fixes: 76ad4f0ee747 ("net: hns3: Add support of HNS3 Ethernet Driver for hip08 SoC")
Signed-off-by: Hao Chen <[email protected]>
Signed-off-by: Huazhong Tan <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/hisilicon/hns3/hns3_enet.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c
index 6b43cbf4f909..3dd3b8047968 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c
@@ -796,7 +796,7 @@ static int hns3_get_l4_protocol(struct sk_buff *skb, u8 *ol4_proto,
* and it is udp packet, which has a dest port as the IANA assigned.
* the hardware is expected to do the checksum offload, but the
* hardware will not do the checksum offload when udp dest port is
- * 4789 or 6081.
+ * 4789, 4790 or 6081.
*/
static bool hns3_tunnel_csum_bug(struct sk_buff *skb)
{
@@ -806,7 +806,8 @@ static bool hns3_tunnel_csum_bug(struct sk_buff *skb)
if (!(!skb->encapsulation &&
(l4.udp->dest == htons(IANA_VXLAN_UDP_PORT) ||
- l4.udp->dest == htons(GENEVE_UDP_PORT))))
+ l4.udp->dest == htons(GENEVE_UDP_PORT) ||
+ l4.udp->dest == htons(4790))))
return false;
skb_checksum_help(skb);
--
2.30.2
From: David Ward <[email protected]>
[ Upstream commit cd8499d5c03ba260e3191e90236d0e5f6b147563 ]
The GPIO configuration cannot be applied if the registers are inaccessible.
This prevented the headset mic from working on the Dell XPS 13 9343.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=114171
Signed-off-by: David Ward <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Pierre-Louis Bossart <[email protected]>
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/soc/codecs/rt286.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/sound/soc/codecs/rt286.c b/sound/soc/codecs/rt286.c
index 03e3e0aa25a2..d8ab8af2c786 100644
--- a/sound/soc/codecs/rt286.c
+++ b/sound/soc/codecs/rt286.c
@@ -171,6 +171,9 @@ static bool rt286_readable_register(struct device *dev, unsigned int reg)
case RT286_PROC_COEF:
case RT286_SET_AMP_GAIN_ADC_IN1:
case RT286_SET_AMP_GAIN_ADC_IN2:
+ case RT286_SET_GPIO_MASK:
+ case RT286_SET_GPIO_DIRECTION:
+ case RT286_SET_GPIO_DATA:
case RT286_SET_POWER(RT286_DAC_OUT1):
case RT286_SET_POWER(RT286_DAC_OUT2):
case RT286_SET_POWER(RT286_ADC_IN1):
--
2.30.2
From: Xin Long <[email protected]>
[ Upstream commit 35b4f24415c854cd718ccdf38dbea6297f010aae ]
There's a panic that occurs in a few of envs, the call trace is as below:
[] general protection fault, ... 0x29acd70f1000a: 0000 [#1] SMP PTI
[] RIP: 0010:sctp_ulpevent_notify_peer_addr_change+0x4b/0x1fa [sctp]
[] sctp_assoc_control_transport+0x1b9/0x210 [sctp]
[] sctp_do_8_2_transport_strike.isra.16+0x15c/0x220 [sctp]
[] sctp_cmd_interpreter.isra.21+0x1231/0x1a10 [sctp]
[] sctp_do_sm+0xc3/0x2a0 [sctp]
[] sctp_generate_timeout_event+0x81/0xf0 [sctp]
This is caused by a transport use-after-free issue. When processing a
duplicate COOKIE-ECHO chunk in sctp_sf_do_dupcook_a(), both COOKIE-ACK
and SHUTDOWN chunks are allocated with the transort from the new asoc.
However, later in the sideeffect machine, the old asoc is used to send
them out and old asoc's shutdown_last_sent_to is set to the transport
that SHUTDOWN chunk attached to in sctp_cmd_setup_t2(), which actually
belongs to the new asoc. After the new_asoc is freed and the old asoc
T2 timeout, the old asoc's shutdown_last_sent_to that is already freed
would be accessed in sctp_sf_t2_timer_expire().
Thanks Alexander and Jere for helping dig into this issue.
To fix it, this patch is to do the asoc update first, then allocate
the COOKIE-ACK and SHUTDOWN chunks with the 'updated' old asoc. This
would make more sense, as a chunk from an asoc shouldn't be sent out
with another asoc. We had fixed quite a few issues caused by this.
Fixes: 145cb2f7177d ("sctp: Fix bundling of SHUTDOWN with COOKIE-ACK")
Reported-by: Alexander Sverdlin <[email protected]>
Reported-by: [email protected]
Reported-by: Michal Tesar <[email protected]>
Signed-off-by: Xin Long <[email protected]>
Acked-by: Marcelo Ricardo Leitner <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/sctp/sm_statefuns.c | 25 ++++++++++++++++++++-----
1 file changed, 20 insertions(+), 5 deletions(-)
diff --git a/net/sctp/sm_statefuns.c b/net/sctp/sm_statefuns.c
index 84138a07e936..72e4eaffacdb 100644
--- a/net/sctp/sm_statefuns.c
+++ b/net/sctp/sm_statefuns.c
@@ -1841,20 +1841,35 @@ static enum sctp_disposition sctp_sf_do_dupcook_a(
SCTP_TO(SCTP_EVENT_TIMEOUT_T4_RTO));
sctp_add_cmd_sf(commands, SCTP_CMD_PURGE_ASCONF_QUEUE, SCTP_NULL());
- repl = sctp_make_cookie_ack(new_asoc, chunk);
+ /* Update the content of current association. */
+ if (sctp_assoc_update((struct sctp_association *)asoc, new_asoc)) {
+ struct sctp_chunk *abort;
+
+ abort = sctp_make_abort(asoc, NULL, sizeof(struct sctp_errhdr));
+ if (abort) {
+ sctp_init_cause(abort, SCTP_ERROR_RSRC_LOW, 0);
+ sctp_add_cmd_sf(commands, SCTP_CMD_REPLY, SCTP_CHUNK(abort));
+ }
+ sctp_add_cmd_sf(commands, SCTP_CMD_SET_SK_ERR, SCTP_ERROR(ECONNABORTED));
+ sctp_add_cmd_sf(commands, SCTP_CMD_ASSOC_FAILED,
+ SCTP_PERR(SCTP_ERROR_RSRC_LOW));
+ SCTP_INC_STATS(net, SCTP_MIB_ABORTEDS);
+ SCTP_DEC_STATS(net, SCTP_MIB_CURRESTAB);
+ goto nomem;
+ }
+
+ repl = sctp_make_cookie_ack(asoc, chunk);
if (!repl)
goto nomem;
/* Report association restart to upper layer. */
ev = sctp_ulpevent_make_assoc_change(asoc, 0, SCTP_RESTART, 0,
- new_asoc->c.sinit_num_ostreams,
- new_asoc->c.sinit_max_instreams,
+ asoc->c.sinit_num_ostreams,
+ asoc->c.sinit_max_instreams,
NULL, GFP_ATOMIC);
if (!ev)
goto nomem_ev;
- /* Update the content of current association. */
- sctp_add_cmd_sf(commands, SCTP_CMD_UPDATE_ASSOC, SCTP_ASOC(new_asoc));
sctp_add_cmd_sf(commands, SCTP_CMD_EVENT_ULP, SCTP_ULPEVENT(ev));
if ((sctp_state(asoc, SHUTDOWN_PENDING) ||
sctp_state(asoc, SHUTDOWN_SENT)) &&
--
2.30.2
From: Anup Patel <[email protected]>
[ Upstream commit 533b4f3a789d49574e7ae0f6ececed153f651f97 ]
We should return a negative error code upon failure in
riscv_hartid_to_cpuid() instead of NR_CPUS. This is also
aligned with all uses of riscv_hartid_to_cpuid() which
expect negative error code upon failure.
Fixes: 6825c7a80f18 ("RISC-V: Add logical CPU indexing for RISC-V")
Fixes: f99fb607fb2b ("RISC-V: Use Linux logical CPU number instead of hartid")
Signed-off-by: Anup Patel <[email protected]>
Signed-off-by: Palmer Dabbelt <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/riscv/kernel/smp.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/riscv/kernel/smp.c b/arch/riscv/kernel/smp.c
index 5c9ec78422c2..098c04adbaaf 100644
--- a/arch/riscv/kernel/smp.c
+++ b/arch/riscv/kernel/smp.c
@@ -51,7 +51,7 @@ int riscv_hartid_to_cpuid(int hartid)
return i;
pr_err("Couldn't find cpu id for hartid [%d]\n", hartid);
- return i;
+ return -ENOENT;
}
void riscv_cpuid_to_hartid_mask(const struct cpumask *in, struct cpumask *out)
--
2.30.2
From: Baptiste Lepers <[email protected]>
[ Upstream commit f8f7e0fb22b2e75be55f2f0c13e229e75b0eac07 ]
Fix a misplaced barrier in call_decode. The struct rpc_rqst is modified
as follows by xprt_complete_rqst:
req->rq_private_buf.len = copied;
/* Ensure all writes are done before we update */
/* req->rq_reply_bytes_recvd */
smp_wmb();
req->rq_reply_bytes_recvd = copied;
And currently read as follows by call_decode:
smp_rmb(); // misplaced
if (!req->rq_reply_bytes_recvd)
goto out;
req->rq_rcv_buf.len = req->rq_private_buf.len;
This patch places the smp_rmb after the if to ensure that
rq_reply_bytes_recvd and rq_private_buf.len are read in order.
Fixes: 9ba828861c56a ("SUNRPC: Don't try to parse incomplete RPC messages")
Signed-off-by: Baptiste Lepers <[email protected]>
Signed-off-by: Trond Myklebust <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/sunrpc/clnt.c | 11 +++++------
1 file changed, 5 insertions(+), 6 deletions(-)
diff --git a/net/sunrpc/clnt.c b/net/sunrpc/clnt.c
index f1088ca39d44..b6039642df67 100644
--- a/net/sunrpc/clnt.c
+++ b/net/sunrpc/clnt.c
@@ -2505,12 +2505,6 @@ call_decode(struct rpc_task *task)
task->tk_flags &= ~RPC_CALL_MAJORSEEN;
}
- /*
- * Ensure that we see all writes made by xprt_complete_rqst()
- * before it changed req->rq_reply_bytes_recvd.
- */
- smp_rmb();
-
/*
* Did we ever call xprt_complete_rqst()? If not, we should assume
* the message is incomplete.
@@ -2519,6 +2513,11 @@ call_decode(struct rpc_task *task)
if (!req->rq_reply_bytes_recvd)
goto out;
+ /* Ensure that we see all writes made by xprt_complete_rqst()
+ * before it changed req->rq_reply_bytes_recvd.
+ */
+ smp_rmb();
+
req->rq_rcv_buf.len = req->rq_private_buf.len;
/* Check that the softirq receive buffer is valid */
--
2.30.2
From: Lv Yunlong <[email protected]>
[ Upstream commit 643001b47adc844ae33510c4bb93c236667008a3 ]
In enic_hard_start_xmit, it calls enic_queue_wq_skb(). Inside
enic_queue_wq_skb, if some error happens, the skb will be freed
by dev_kfree_skb(skb). But the freed skb is still used in
skb_tx_timestamp(skb).
My patch makes enic_queue_wq_skb() return error and goto spin_unlock()
incase of error. The solution is provided by Govind.
See https://lkml.org/lkml/2021/4/30/961.
Fixes: fb7516d42478e ("enic: add sw timestamp support")
Signed-off-by: Lv Yunlong <[email protected]>
Acked-by: Govindarajulu Varadarajan <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/cisco/enic/enic_main.c | 7 +++++--
1 file changed, 5 insertions(+), 2 deletions(-)
diff --git a/drivers/net/ethernet/cisco/enic/enic_main.c b/drivers/net/ethernet/cisco/enic/enic_main.c
index 8314102002b0..03c8af58050c 100644
--- a/drivers/net/ethernet/cisco/enic/enic_main.c
+++ b/drivers/net/ethernet/cisco/enic/enic_main.c
@@ -803,7 +803,7 @@ static inline int enic_queue_wq_skb_encap(struct enic *enic, struct vnic_wq *wq,
return err;
}
-static inline void enic_queue_wq_skb(struct enic *enic,
+static inline int enic_queue_wq_skb(struct enic *enic,
struct vnic_wq *wq, struct sk_buff *skb)
{
unsigned int mss = skb_shinfo(skb)->gso_size;
@@ -849,6 +849,7 @@ static inline void enic_queue_wq_skb(struct enic *enic,
wq->to_use = buf->next;
dev_kfree_skb(skb);
}
+ return err;
}
/* netif_tx_lock held, process context with BHs disabled, or BH */
@@ -892,7 +893,8 @@ static netdev_tx_t enic_hard_start_xmit(struct sk_buff *skb,
return NETDEV_TX_BUSY;
}
- enic_queue_wq_skb(enic, wq, skb);
+ if (enic_queue_wq_skb(enic, wq, skb))
+ goto error;
if (vnic_wq_desc_avail(wq) < MAX_SKB_FRAGS + ENIC_DESC_MAX_SPLITS)
netif_tx_stop_queue(txq);
@@ -900,6 +902,7 @@ static netdev_tx_t enic_hard_start_xmit(struct sk_buff *skb,
if (!netdev_xmit_more() || netif_xmit_stopped(txq))
vnic_wq_doorbell(wq);
+error:
spin_unlock(&enic->wq_lock[txq_map]);
return NETDEV_TX_OK;
--
2.30.2
From: Xin Long <[email protected]>
[ Upstream commit f282df0391267fb2b263da1cc3233aa6fb81defc ]
Normally SCTP_MIB_CURRESTAB is always incremented once asoc enter into
ESTABLISHED from the state < ESTABLISHED and decremented when the asoc
is being deleted.
However, in sctp_sf_do_dupcook_b(), the asoc's state can be changed to
ESTABLISHED from the state >= ESTABLISHED where it shouldn't increment
SCTP_MIB_CURRESTAB. Otherwise, one asoc may increment MIB_CURRESTAB
multiple times but only decrement once at the end.
I was able to reproduce it by using scapy to do the 4-way shakehands,
after that I replayed the COOKIE-ECHO chunk with 'peer_vtag' field
changed to different values, and SCTP_MIB_CURRESTAB was incremented
multiple times and never went back to 0 even when the asoc was freed.
This patch is to fix it by only incrementing SCTP_MIB_CURRESTAB when
the state < ESTABLISHED in sctp_sf_do_dupcook_b().
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-by: Marcelo Ricardo Leitner <[email protected]>
Signed-off-by: Xin Long <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/sctp/sm_statefuns.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/net/sctp/sm_statefuns.c b/net/sctp/sm_statefuns.c
index 72e4eaffacdb..82a202d71a31 100644
--- a/net/sctp/sm_statefuns.c
+++ b/net/sctp/sm_statefuns.c
@@ -1933,7 +1933,8 @@ static enum sctp_disposition sctp_sf_do_dupcook_b(
sctp_add_cmd_sf(commands, SCTP_CMD_UPDATE_ASSOC, SCTP_ASOC(new_asoc));
sctp_add_cmd_sf(commands, SCTP_CMD_NEW_STATE,
SCTP_STATE(SCTP_STATE_ESTABLISHED));
- SCTP_INC_STATS(net, SCTP_MIB_CURRESTAB);
+ if (asoc->state < SCTP_STATE_ESTABLISHED)
+ SCTP_INC_STATS(net, SCTP_MIB_CURRESTAB);
sctp_add_cmd_sf(commands, SCTP_CMD_HB_TIMERS_START, SCTP_NULL());
repl = sctp_make_cookie_ack(new_asoc, chunk);
--
2.30.2
From: Pablo Neira Ayuso <[email protected]>
[ Upstream commit c7d13358b6a2f49f81a34aa323a2d0878a0532a2 ]
This extension breaks when trying to delete rules, add a new revision to
fix this.
Fixes: 5e6874cdb8de ("[SECMARK]: Add xtables SECMARK target")
Signed-off-by: Phil Sutter <[email protected]>
Signed-off-by: Pablo Neira Ayuso <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
include/uapi/linux/netfilter/xt_SECMARK.h | 6 ++
net/netfilter/xt_SECMARK.c | 88 ++++++++++++++++++-----
2 files changed, 75 insertions(+), 19 deletions(-)
diff --git a/include/uapi/linux/netfilter/xt_SECMARK.h b/include/uapi/linux/netfilter/xt_SECMARK.h
index 1f2a708413f5..beb2cadba8a9 100644
--- a/include/uapi/linux/netfilter/xt_SECMARK.h
+++ b/include/uapi/linux/netfilter/xt_SECMARK.h
@@ -20,4 +20,10 @@ struct xt_secmark_target_info {
char secctx[SECMARK_SECCTX_MAX];
};
+struct xt_secmark_target_info_v1 {
+ __u8 mode;
+ char secctx[SECMARK_SECCTX_MAX];
+ __u32 secid;
+};
+
#endif /*_XT_SECMARK_H_target */
diff --git a/net/netfilter/xt_SECMARK.c b/net/netfilter/xt_SECMARK.c
index 2317721f3ecb..ea7aeea19b3b 100644
--- a/net/netfilter/xt_SECMARK.c
+++ b/net/netfilter/xt_SECMARK.c
@@ -26,10 +26,9 @@ MODULE_ALIAS("ip6t_SECMARK");
static u8 mode;
static unsigned int
-secmark_tg(struct sk_buff *skb, const struct xt_action_param *par)
+secmark_tg(struct sk_buff *skb, const struct xt_secmark_target_info_v1 *info)
{
u32 secmark = 0;
- const struct xt_secmark_target_info *info = par->targinfo;
switch (mode) {
case SECMARK_MODE_SEL:
@@ -43,7 +42,7 @@ secmark_tg(struct sk_buff *skb, const struct xt_action_param *par)
return XT_CONTINUE;
}
-static int checkentry_lsm(struct xt_secmark_target_info *info)
+static int checkentry_lsm(struct xt_secmark_target_info_v1 *info)
{
int err;
@@ -75,15 +74,15 @@ static int checkentry_lsm(struct xt_secmark_target_info *info)
return 0;
}
-static int secmark_tg_check(const struct xt_tgchk_param *par)
+static int
+secmark_tg_check(const char *table, struct xt_secmark_target_info_v1 *info)
{
- struct xt_secmark_target_info *info = par->targinfo;
int err;
- if (strcmp(par->table, "mangle") != 0 &&
- strcmp(par->table, "security") != 0) {
+ if (strcmp(table, "mangle") != 0 &&
+ strcmp(table, "security") != 0) {
pr_info_ratelimited("only valid in \'mangle\' or \'security\' table, not \'%s\'\n",
- par->table);
+ table);
return -EINVAL;
}
@@ -118,25 +117,76 @@ static void secmark_tg_destroy(const struct xt_tgdtor_param *par)
}
}
-static struct xt_target secmark_tg_reg __read_mostly = {
- .name = "SECMARK",
- .revision = 0,
- .family = NFPROTO_UNSPEC,
- .checkentry = secmark_tg_check,
- .destroy = secmark_tg_destroy,
- .target = secmark_tg,
- .targetsize = sizeof(struct xt_secmark_target_info),
- .me = THIS_MODULE,
+static int secmark_tg_check_v0(const struct xt_tgchk_param *par)
+{
+ struct xt_secmark_target_info *info = par->targinfo;
+ struct xt_secmark_target_info_v1 newinfo = {
+ .mode = info->mode,
+ };
+ int ret;
+
+ memcpy(newinfo.secctx, info->secctx, SECMARK_SECCTX_MAX);
+
+ ret = secmark_tg_check(par->table, &newinfo);
+ info->secid = newinfo.secid;
+
+ return ret;
+}
+
+static unsigned int
+secmark_tg_v0(struct sk_buff *skb, const struct xt_action_param *par)
+{
+ const struct xt_secmark_target_info *info = par->targinfo;
+ struct xt_secmark_target_info_v1 newinfo = {
+ .secid = info->secid,
+ };
+
+ return secmark_tg(skb, &newinfo);
+}
+
+static int secmark_tg_check_v1(const struct xt_tgchk_param *par)
+{
+ return secmark_tg_check(par->table, par->targinfo);
+}
+
+static unsigned int
+secmark_tg_v1(struct sk_buff *skb, const struct xt_action_param *par)
+{
+ return secmark_tg(skb, par->targinfo);
+}
+
+static struct xt_target secmark_tg_reg[] __read_mostly = {
+ {
+ .name = "SECMARK",
+ .revision = 0,
+ .family = NFPROTO_UNSPEC,
+ .checkentry = secmark_tg_check_v0,
+ .destroy = secmark_tg_destroy,
+ .target = secmark_tg_v0,
+ .targetsize = sizeof(struct xt_secmark_target_info),
+ .me = THIS_MODULE,
+ },
+ {
+ .name = "SECMARK",
+ .revision = 1,
+ .family = NFPROTO_UNSPEC,
+ .checkentry = secmark_tg_check_v1,
+ .destroy = secmark_tg_destroy,
+ .target = secmark_tg_v1,
+ .targetsize = sizeof(struct xt_secmark_target_info_v1),
+ .usersize = offsetof(struct xt_secmark_target_info_v1, secid),
+ .me = THIS_MODULE,
+ },
};
static int __init secmark_tg_init(void)
{
- return xt_register_target(&secmark_tg_reg);
+ return xt_register_targets(secmark_tg_reg, ARRAY_SIZE(secmark_tg_reg));
}
static void __exit secmark_tg_exit(void)
{
- xt_unregister_target(&secmark_tg_reg);
+ xt_unregister_targets(secmark_tg_reg, ARRAY_SIZE(secmark_tg_reg));
}
module_init(secmark_tg_init);
--
2.30.2
From: Kees Cook <[email protected]>
[ Upstream commit 5bbf219328849e83878bddb7c226d8d42e84affc ]
An out of bounds write happens when setting the default power state.
KASAN sees this as:
[drm] radeon: 512M of GTT memory ready.
[drm] GART: num cpu pages 131072, num gpu pages 131072
==================================================================
BUG: KASAN: slab-out-of-bounds in
radeon_atombios_parse_power_table_1_3+0x1837/0x1998 [radeon]
Write of size 4 at addr ffff88810178d858 by task systemd-udevd/157
CPU: 0 PID: 157 Comm: systemd-udevd Not tainted 5.12.0-E620 #50
Hardware name: eMachines eMachines E620 /Nile , BIOS V1.03 09/30/2008
Call Trace:
dump_stack+0xa5/0xe6
print_address_description.constprop.0+0x18/0x239
kasan_report+0x170/0x1a8
radeon_atombios_parse_power_table_1_3+0x1837/0x1998 [radeon]
radeon_atombios_get_power_modes+0x144/0x1888 [radeon]
radeon_pm_init+0x1019/0x1904 [radeon]
rs690_init+0x76e/0x84a [radeon]
radeon_device_init+0x1c1a/0x21e5 [radeon]
radeon_driver_load_kms+0xf5/0x30b [radeon]
drm_dev_register+0x255/0x4a0 [drm]
radeon_pci_probe+0x246/0x2f6 [radeon]
pci_device_probe+0x1aa/0x294
really_probe+0x30e/0x850
driver_probe_device+0xe6/0x135
device_driver_attach+0xc1/0xf8
__driver_attach+0x13f/0x146
bus_for_each_dev+0xfa/0x146
bus_add_driver+0x2b3/0x447
driver_register+0x242/0x2c1
do_one_initcall+0x149/0x2fd
do_init_module+0x1ae/0x573
load_module+0x4dee/0x5cca
__do_sys_finit_module+0xf1/0x140
do_syscall_64+0x33/0x40
entry_SYSCALL_64_after_hwframe+0x44/0xae
Without KASAN, this will manifest later when the kernel attempts to
allocate memory that was stomped, since it collides with the inline slab
freelist pointer:
invalid opcode: 0000 [#1] SMP NOPTI
CPU: 0 PID: 781 Comm: openrc-run.sh Tainted: G W 5.10.12-gentoo-E620 #2
Hardware name: eMachines eMachines E620 /Nile , BIOS V1.03 09/30/2008
RIP: 0010:kfree+0x115/0x230
Code: 89 c5 e8 75 ea ff ff 48 8b 00 0f ba e0 09 72 63 e8 1f f4 ff ff 41 89 c4 48 8b 45 00 0f ba e0 10 72 0a 48 8b 45 08 a8 01 75 02 <0f> 0b 44 89 e1 48 c7 c2 00 f0 ff ff be 06 00 00 00 48 d3 e2 48 c7
RSP: 0018:ffffb42f40267e10 EFLAGS: 00010246
RAX: ffffd61280ee8d88 RBX: 0000000000000004 RCX: 000000008010000d
RDX: 4000000000000000 RSI: ffffffffba1360b0 RDI: ffffd61280ee8d80
RBP: ffffd61280ee8d80 R08: ffffffffb91bebdf R09: 0000000000000000
R10: ffff8fe2c1047ac8 R11: 0000000000000000 R12: 0000000000000000
R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000100
FS: 00007fe80eff6b68(0000) GS:ffff8fe339c00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fe80eec7bc0 CR3: 0000000038012000 CR4: 00000000000006f0
Call Trace:
__free_fdtable+0x16/0x1f
put_files_struct+0x81/0x9b
do_exit+0x433/0x94d
do_group_exit+0xa6/0xa6
__x64_sys_exit_group+0xf/0xf
do_syscall_64+0x33/0x40
entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x7fe80ef64bea
Code: Unable to access opcode bytes at RIP 0x7fe80ef64bc0.
RSP: 002b:00007ffdb1c47528 EFLAGS: 00000246 ORIG_RAX: 00000000000000e7
RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 00007fe80ef64bea
RDX: 00007fe80ef64f60 RSI: 0000000000000000 RDI: 0000000000000000
RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000000
R10: 00007fe80ee2c620 R11: 0000000000000246 R12: 00007fe80eff41e0
R13: 00000000ffffffff R14: 0000000000000024 R15: 00007fe80edf9cd0
Modules linked in: radeon(+) ath5k(+) snd_hda_codec_realtek ...
Use a valid power_state index when initializing the "flags" and "misc"
and "misc2" fields.
Bug: https://bugzilla.kernel.org/show_bug.cgi?id=211537
Reported-by: Erhard F. <[email protected]>
Fixes: a48b9b4edb8b ("drm/radeon/kms/pm: add asic specific callbacks for getting power state (v2)")
Fixes: 79daedc94281 ("drm/radeon/kms: minor pm cleanups")
Signed-off-by: Kees Cook <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/radeon/radeon_atombios.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/gpu/drm/radeon/radeon_atombios.c b/drivers/gpu/drm/radeon/radeon_atombios.c
index 226a7bf0eb7a..97703449e049 100644
--- a/drivers/gpu/drm/radeon/radeon_atombios.c
+++ b/drivers/gpu/drm/radeon/radeon_atombios.c
@@ -2266,10 +2266,10 @@ static int radeon_atombios_parse_power_table_1_3(struct radeon_device *rdev)
rdev->pm.default_power_state_index = state_index - 1;
rdev->pm.power_state[state_index - 1].default_clock_mode =
&rdev->pm.power_state[state_index - 1].clock_info[0];
- rdev->pm.power_state[state_index].flags &=
+ rdev->pm.power_state[state_index - 1].flags &=
~RADEON_PM_STATE_SINGLE_DISPLAY_ONLY;
- rdev->pm.power_state[state_index].misc = 0;
- rdev->pm.power_state[state_index].misc2 = 0;
+ rdev->pm.power_state[state_index - 1].misc = 0;
+ rdev->pm.power_state[state_index - 1].misc2 = 0;
}
return state_index;
}
--
2.30.2
From: Kees Cook <[email protected]>
[ Upstream commit c69f27137a38d24301a6b659454a91ad85dff4aa ]
Avoid leaving a hanging pre-allocated clock_info if last mode is
invalid, and avoid heap corruption if no valid modes are found.
Bug: https://bugzilla.kernel.org/show_bug.cgi?id=211537
Fixes: 6991b8f2a319 ("drm/radeon/kms: fix segfault in pm rework")
Signed-off-by: Kees Cook <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/radeon/radeon_atombios.c | 20 +++++++++++++++-----
1 file changed, 15 insertions(+), 5 deletions(-)
diff --git a/drivers/gpu/drm/radeon/radeon_atombios.c b/drivers/gpu/drm/radeon/radeon_atombios.c
index 97703449e049..9e0aa357585f 100644
--- a/drivers/gpu/drm/radeon/radeon_atombios.c
+++ b/drivers/gpu/drm/radeon/radeon_atombios.c
@@ -2136,11 +2136,14 @@ static int radeon_atombios_parse_power_table_1_3(struct radeon_device *rdev)
return state_index;
/* last mode is usually default, array is low to high */
for (i = 0; i < num_modes; i++) {
- rdev->pm.power_state[state_index].clock_info =
- kcalloc(1, sizeof(struct radeon_pm_clock_info),
- GFP_KERNEL);
+ /* avoid memory leaks from invalid modes or unknown frev. */
+ if (!rdev->pm.power_state[state_index].clock_info) {
+ rdev->pm.power_state[state_index].clock_info =
+ kzalloc(sizeof(struct radeon_pm_clock_info),
+ GFP_KERNEL);
+ }
if (!rdev->pm.power_state[state_index].clock_info)
- return state_index;
+ goto out;
rdev->pm.power_state[state_index].num_clock_modes = 1;
rdev->pm.power_state[state_index].clock_info[0].voltage.type = VOLTAGE_NONE;
switch (frev) {
@@ -2259,8 +2262,15 @@ static int radeon_atombios_parse_power_table_1_3(struct radeon_device *rdev)
break;
}
}
+out:
+ /* free any unused clock_info allocation. */
+ if (state_index && state_index < num_modes) {
+ kfree(rdev->pm.power_state[state_index].clock_info);
+ rdev->pm.power_state[state_index].clock_info = NULL;
+ }
+
/* last mode is usually default */
- if (rdev->pm.default_power_state_index == -1) {
+ if (state_index && rdev->pm.default_power_state_index == -1) {
rdev->pm.power_state[state_index - 1].type =
POWER_STATE_TYPE_DEFAULT;
rdev->pm.default_power_state_index = state_index - 1;
--
2.30.2
From: Miaohe Lin <[email protected]>
[ Upstream commit da56388c4397878a65b74f7fe97760f5aa7d316b ]
A rare out of memory error would prevent removal of the reserve map region
for a page. hugetlb_fix_reserve_counts() handles this rare case to avoid
dangling with incorrect counts. Unfortunately, hugepage_subpool_get_pages
and hugetlb_acct_memory could possibly fail too. We should correctly
handle these cases.
Link: https://lkml.kernel.org/r/[email protected]
Fixes: b5cec28d36f5 ("hugetlbfs: truncate_hugepages() takes a range of pages")
Signed-off-by: Miaohe Lin <[email protected]>
Cc: Feilong Lin <[email protected]>
Cc: Mike Kravetz <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
mm/hugetlb.c | 11 +++++++++--
1 file changed, 9 insertions(+), 2 deletions(-)
diff --git a/mm/hugetlb.c b/mm/hugetlb.c
index 5253c67acb1d..3b08e34a775d 100644
--- a/mm/hugetlb.c
+++ b/mm/hugetlb.c
@@ -591,13 +591,20 @@ void hugetlb_fix_reserve_counts(struct inode *inode)
{
struct hugepage_subpool *spool = subpool_inode(inode);
long rsv_adjust;
+ bool reserved = false;
rsv_adjust = hugepage_subpool_get_pages(spool, 1);
- if (rsv_adjust) {
+ if (rsv_adjust > 0) {
struct hstate *h = hstate_inode(inode);
- hugetlb_acct_memory(h, 1);
+ if (!hugetlb_acct_memory(h, 1))
+ reserved = true;
+ } else if (!rsv_adjust) {
+ reserved = true;
}
+
+ if (!reserved)
+ pr_warn("hugetlb: Huge Page Reserved count may go negative.\n");
}
/*
--
2.30.2
From: Miaohe Lin <[email protected]>
[ Upstream commit 74e579bf231a337ab3786d59e64bc94f45ca7b3f ]
In writable and !referenced case, the result value should be
SCAN_LACK_REFERENCED_PAGE for trace_mm_collapse_huge_page_isolate()
instead of default 0 (SCAN_FAIL) here.
Link: https://lkml.kernel.org/r/[email protected]
Fixes: 7d2eba0557c1 ("mm: add tracepoint for scanning pages")
Signed-off-by: Miaohe Lin <[email protected]>
Acked-by: Kirill A. Shutemov <[email protected]>
Cc: Dan Carpenter <[email protected]>
Cc: Ebru Akagunduz <[email protected]>
Cc: Mike Kravetz <[email protected]>
Cc: Rik van Riel <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
mm/khugepaged.c | 18 +++++++++---------
1 file changed, 9 insertions(+), 9 deletions(-)
diff --git a/mm/khugepaged.c b/mm/khugepaged.c
index f0d7e6483ba3..3c2326568193 100644
--- a/mm/khugepaged.c
+++ b/mm/khugepaged.c
@@ -628,17 +628,17 @@ static int __collapse_huge_page_isolate(struct vm_area_struct *vma,
mmu_notifier_test_young(vma->vm_mm, address))
referenced++;
}
- if (likely(writable)) {
- if (likely(referenced)) {
- result = SCAN_SUCCEED;
- trace_mm_collapse_huge_page_isolate(page, none_or_zero,
- referenced, writable, result);
- return 1;
- }
- } else {
+
+ if (unlikely(!writable)) {
result = SCAN_PAGE_RO;
+ } else if (unlikely(!referenced)) {
+ result = SCAN_LACK_REFERENCED_PAGE;
+ } else {
+ result = SCAN_SUCCEED;
+ trace_mm_collapse_huge_page_isolate(page, none_or_zero,
+ referenced, writable, result);
+ return 1;
}
-
out:
release_pte_pages(pte, _pte);
trace_mm_collapse_huge_page_isolate(page, none_or_zero,
--
2.30.2
From: Miaohe Lin <[email protected]>
[ Upstream commit 34f5e9b9d1990d286199084efa752530ee3d8297 ]
If the zone device page does not belong to un-addressable device memory,
the variable entry will be uninitialized and lead to indeterminate pte
entry ultimately. Fix this unexpected case and warn about it.
Link: https://lkml.kernel.org/r/[email protected]
Fixes: df6ad69838fc ("mm/device-public-memory: device memory cache coherent with CPU")
Signed-off-by: Miaohe Lin <[email protected]>
Reviewed-by: David Hildenbrand <[email protected]>
Cc: Alistair Popple <[email protected]>
Cc: Jerome Glisse <[email protected]>
Cc: Rafael Aquini <[email protected]>
Cc: Yang Shi <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
mm/migrate.c | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/mm/migrate.c b/mm/migrate.c
index c4c313e47f12..00bbe57c1ce2 100644
--- a/mm/migrate.c
+++ b/mm/migrate.c
@@ -2771,6 +2771,13 @@ static void migrate_vma_insert_page(struct migrate_vma *migrate,
swp_entry = make_device_private_entry(page, vma->vm_flags & VM_WRITE);
entry = swp_entry_to_pte(swp_entry);
+ } else {
+ /*
+ * For now we only support migrating to un-addressable
+ * device memory.
+ */
+ pr_warn_once("Unsupported ZONE_DEVICE page type.\n");
+ goto abort;
}
} else {
entry = mk_pte(page, vma->vm_page_prot);
--
2.30.2
From: Miaohe Lin <[email protected]>
[ Upstream commit c89a384e2551c692a9fe60d093fd7080f50afc51 ]
When removing rmap_item from stable tree, STABLE_FLAG of rmap_item is
cleared with head reserved. So the following scenario might happen: For
ksm page with rmap_item1:
cmp_and_merge_page
stable_node->head = &migrate_nodes;
remove_rmap_item_from_tree, but head still equal to stable_node;
try_to_merge_with_ksm_page failed;
return;
For the same ksm page with rmap_item2, stable node migration succeed this
time. The stable_node->head does not equal to migrate_nodes now. For ksm
page with rmap_item1 again:
cmp_and_merge_page
stable_node->head != &migrate_nodes && rmap_item->head == stable_node
return;
We would miss the rmap_item for stable_node and might result in failed
rmap_walk_ksm(). Fix this by set rmap_item->head to NULL when rmap_item
is removed from stable tree.
Link: https://lkml.kernel.org/r/[email protected]
Fixes: 4146d2d673e8 ("ksm: make !merge_across_nodes migration safe")
Signed-off-by: Miaohe Lin <[email protected]>
Cc: Hugh Dickins <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
mm/ksm.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/mm/ksm.c b/mm/ksm.c
index e486c54d921b..0bbae78aaaa0 100644
--- a/mm/ksm.c
+++ b/mm/ksm.c
@@ -793,6 +793,7 @@ static void remove_rmap_item_from_tree(struct rmap_item *rmap_item)
stable_node->rmap_hlist_len--;
put_anon_vma(rmap_item->anon_vma);
+ rmap_item->head = NULL;
rmap_item->address &= PAGE_MASK;
} else if (rmap_item->address & UNSTABLE_FLAG) {
--
2.30.2
From: Maciej Żenczykowski <[email protected]>
[ Upstream commit 2c16db6c92b0ee4aa61e88366df82169e83c3f7e ]
Android userspace has been using TCA_KIND with a char[IFNAMESIZ]
many-null-terminated buffer containing the string 'bpf'.
This works on 4.19 and ceases to work on 5.10.
I'm not entirely sure what fixes tag to use, but I think the issue
was likely introduced in the below mentioned 5.4 commit.
Reported-by: Nucca Chen <[email protected]>
Cc: Cong Wang <[email protected]>
Cc: David Ahern <[email protected]>
Cc: David S. Miller <[email protected]>
Cc: Jakub Kicinski <[email protected]>
Cc: Jamal Hadi Salim <[email protected]>
Cc: Jiri Pirko <[email protected]>
Cc: Jiri Pirko <[email protected]>
Fixes: 62794fc4fbf5 ("net_sched: add max len check for TCA_KIND")
Change-Id: I66dc281f165a2858fc29a44869a270a2d698a82b
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
lib/nlattr.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/lib/nlattr.c b/lib/nlattr.c
index cace9b307781..0d84f79cb4b5 100644
--- a/lib/nlattr.c
+++ b/lib/nlattr.c
@@ -609,7 +609,7 @@ int nla_strcmp(const struct nlattr *nla, const char *str)
int attrlen = nla_len(nla);
int d;
- if (attrlen > 0 && buf[attrlen - 1] == '\0')
+ while (attrlen > 0 && buf[attrlen - 1] == '\0')
attrlen--;
d = attrlen - len;
--
2.30.2
From: Cong Wang <[email protected]>
[ Upstream commit 8621436671f3a4bba5db57482e1ee604708bf1eb ]
syzbot is able to setup kTLS on an SMC socket which coincidentally
uses sk_user_data too. Later, kTLS treats it as psock so triggers a
refcnt warning. The root cause is that smc_setsockopt() simply calls
TCP setsockopt() which includes TCP_ULP. I do not think it makes
sense to setup kTLS on top of SMC sockets, so we should just disallow
this setup.
It is hard to find a commit to blame, but we can apply this patch
since the beginning of TCP_ULP.
Reported-and-tested-by: [email protected]
Fixes: 734942cc4ea6 ("tcp: ULP infrastructure")
Cc: John Fastabend <[email protected]>
Signed-off-by: Karsten Graul <[email protected]>
Signed-off-by: Cong Wang <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/smc/af_smc.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/net/smc/af_smc.c b/net/smc/af_smc.c
index dc09a72f8110..51986f7ead81 100644
--- a/net/smc/af_smc.c
+++ b/net/smc/af_smc.c
@@ -1709,6 +1709,9 @@ static int smc_setsockopt(struct socket *sock, int level, int optname,
struct smc_sock *smc;
int val, rc;
+ if (level == SOL_TCP && optname == TCP_ULP)
+ return -EOPNOTSUPP;
+
smc = smc_sk(sk);
/* generic setsockopts reaching us here always apply to the
@@ -1730,7 +1733,6 @@ static int smc_setsockopt(struct socket *sock, int level, int optname,
if (rc || smc->use_fallback)
goto out;
switch (optname) {
- case TCP_ULP:
case TCP_FASTOPEN:
case TCP_FASTOPEN_CONNECT:
case TCP_FASTOPEN_KEY:
--
2.30.2
From: Marc Kleine-Budde <[email protected]>
[ Upstream commit e04b2cfe61072c7966e1a5fb73dd1feb30c206ed ]
The m_can_start_xmit() function checks if the cdev->tx_skb is NULL and
returns with NETDEV_TX_BUSY in case tx_sbk is not NULL.
There is a race condition in the m_can_tx_work_queue(), where first
the skb is send to the driver and then the case tx_sbk is set to NULL.
A TX complete IRQ might come in between and wake the queue, which
results in tx_skb not being cleared yet.
Fixes: f524f829b75a ("can: m_can: Create a m_can platform framework")
Tested-by: Torin Cooper-Bennun <[email protected]>
Signed-off-by: Marc Kleine-Budde <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/can/m_can/m_can.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/net/can/m_can/m_can.c b/drivers/net/can/m_can/m_can.c
index b2224113987c..de275ccb4fd0 100644
--- a/drivers/net/can/m_can/m_can.c
+++ b/drivers/net/can/m_can/m_can.c
@@ -1418,6 +1418,8 @@ static netdev_tx_t m_can_tx_handler(struct m_can_classdev *cdev)
int i;
int putidx;
+ cdev->tx_skb = NULL;
+
/* Generate ID field for TX buffer Element */
/* Common to all supported M_CAN versions */
if (cf->can_id & CAN_EFF_FLAG) {
@@ -1534,7 +1536,6 @@ static void m_can_tx_work_queue(struct work_struct *ws)
tx_work);
m_can_tx_handler(cdev);
- cdev->tx_skb = NULL;
}
static netdev_tx_t m_can_start_xmit(struct sk_buff *skb,
--
2.30.2
From: Pablo Neira Ayuso <[email protected]>
[ Upstream commit 5e024c325406470d1165a09c6feaf8ec897936be ]
Do not assume that the tcph->doff field is correct when parsing for TCP
options, skb_header_pointer() might fail to fetch these bits.
Fixes: 11eeef41d5f6 ("netfilter: passive OS fingerprint xtables match")
Signed-off-by: Pablo Neira Ayuso <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/netfilter/nfnetlink_osf.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/net/netfilter/nfnetlink_osf.c b/net/netfilter/nfnetlink_osf.c
index 916a3c7f9eaf..79fbf37291f3 100644
--- a/net/netfilter/nfnetlink_osf.c
+++ b/net/netfilter/nfnetlink_osf.c
@@ -186,6 +186,8 @@ static const struct tcphdr *nf_osf_hdr_ctx_init(struct nf_osf_hdr_ctx *ctx,
ctx->optp = skb_header_pointer(skb, ip_hdrlen(skb) +
sizeof(struct tcphdr), ctx->optsize, opts);
+ if (!ctx->optp)
+ return NULL;
}
return tcp;
--
2.30.2
From: Quentin Perret <[email protected]>
[ Upstream commit 6d2f8909a5fabb73fe2a63918117943986c39b6c ]
Util-clamp places tasks in different buckets based on their clamp values
for performance reasons. However, the size of buckets is currently
computed using a rounding division, which can lead to an off-by-one
error in some configurations.
For instance, with 20 buckets, the bucket size will be 1024/20=51. A
task with a clamp of 1024 will be mapped to bucket id 1024/51=20. Sadly,
correct indexes are in range [0,19], hence leading to an out of bound
memory access.
Clamp the bucket id to fix the issue.
Fixes: 69842cba9ace ("sched/uclamp: Add CPU's clamp buckets refcounting")
Suggested-by: Qais Yousef <[email protected]>
Signed-off-by: Quentin Perret <[email protected]>
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Reviewed-by: Vincent Guittot <[email protected]>
Reviewed-by: Dietmar Eggemann <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
kernel/sched/core.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/kernel/sched/core.c b/kernel/sched/core.c
index 2ce61018e33b..a3e95d7779e1 100644
--- a/kernel/sched/core.c
+++ b/kernel/sched/core.c
@@ -820,7 +820,7 @@ DEFINE_STATIC_KEY_FALSE(sched_uclamp_used);
static inline unsigned int uclamp_bucket_id(unsigned int clamp_value)
{
- return clamp_value / UCLAMP_BUCKET_DELTA;
+ return min_t(unsigned int, clamp_value / UCLAMP_BUCKET_DELTA, UCLAMP_BUCKETS - 1);
}
static inline unsigned int uclamp_bucket_base_value(unsigned int clamp_value)
--
2.30.2
From: Odin Ugedal <[email protected]>
[ Upstream commit 0258bdfaff5bd13c4d2383150b7097aecd6b6d82 ]
This fixes an issue where old load on a cfs_rq is not properly decayed,
resulting in strange behavior where fairness can decrease drastically.
Real workloads with equally weighted control groups have ended up
getting a respective 99% and 1%(!!) of cpu time.
When an idle task is attached to a cfs_rq by attaching a pid to a cgroup,
the old load of the task is attached to the new cfs_rq and sched_entity by
attach_entity_cfs_rq. If the task is then moved to another cpu (and
therefore cfs_rq) before being enqueued/woken up, the load will be moved
to cfs_rq->removed from the sched_entity. Such a move will happen when
enforcing a cpuset on the task (eg. via a cgroup) that force it to move.
The load will however not be removed from the task_group itself, making
it look like there is a constant load on that cfs_rq. This causes the
vruntime of tasks on other sibling cfs_rq's to increase faster than they
are supposed to; causing severe fairness issues. If no other task is
started on the given cfs_rq, and due to the cpuset it would not happen,
this load would never be properly unloaded. With this patch the load
will be properly removed inside update_blocked_averages. This also
applies to tasks moved to the fair scheduling class and moved to another
cpu, and this path will also fix that. For fork, the entity is queued
right away, so this problem does not affect that.
This applies to cases where the new process is the first in the cfs_rq,
issue introduced 3d30544f0212 ("sched/fair: Apply more PELT fixes"), and
when there has previously been load on the cgroup but the cgroup was
removed from the leaflist due to having null PELT load, indroduced
in 039ae8bcf7a5 ("sched/fair: Fix O(nr_cgroups) in the load balancing
path").
For a simple cgroup hierarchy (as seen below) with two equally weighted
groups, that in theory should get 50/50 of cpu time each, it often leads
to a load of 60/40 or 70/30.
parent/
cg-1/
cpu.weight: 100
cpuset.cpus: 1
cg-2/
cpu.weight: 100
cpuset.cpus: 1
If the hierarchy is deeper (as seen below), while keeping cg-1 and cg-2
equally weighted, they should still get a 50/50 balance of cpu time.
This however sometimes results in a balance of 10/90 or 1/99(!!) between
the task groups.
$ ps u -C stress
USER PID %CPU %MEM VSZ RSS TTY STAT START TIME COMMAND
root 18568 1.1 0.0 3684 100 pts/12 R+ 13:36 0:00 stress --cpu 1
root 18580 99.3 0.0 3684 100 pts/12 R+ 13:36 0:09 stress --cpu 1
parent/
cg-1/
cpu.weight: 100
sub-group/
cpu.weight: 1
cpuset.cpus: 1
cg-2/
cpu.weight: 100
sub-group/
cpu.weight: 10000
cpuset.cpus: 1
This can be reproduced by attaching an idle process to a cgroup and
moving it to a given cpuset before it wakes up. The issue is evident in
many (if not most) container runtimes, and has been reproduced
with both crun and runc (and therefore docker and all its "derivatives"),
and with both cgroup v1 and v2.
Fixes: 3d30544f0212 ("sched/fair: Apply more PELT fixes")
Fixes: 039ae8bcf7a5 ("sched/fair: Fix O(nr_cgroups) in the load balancing path")
Signed-off-by: Odin Ugedal <[email protected]>
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Reviewed-by: Vincent Guittot <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
kernel/sched/fair.c | 12 +++++++++---
1 file changed, 9 insertions(+), 3 deletions(-)
diff --git a/kernel/sched/fair.c b/kernel/sched/fair.c
index 93ab546b6e16..092aa5e47251 100644
--- a/kernel/sched/fair.c
+++ b/kernel/sched/fair.c
@@ -10146,16 +10146,22 @@ static void propagate_entity_cfs_rq(struct sched_entity *se)
{
struct cfs_rq *cfs_rq;
+ list_add_leaf_cfs_rq(cfs_rq_of(se));
+
/* Start to propagate at parent */
se = se->parent;
for_each_sched_entity(se) {
cfs_rq = cfs_rq_of(se);
- if (cfs_rq_throttled(cfs_rq))
- break;
+ if (!cfs_rq_throttled(cfs_rq)){
+ update_load_avg(cfs_rq, se, UPDATE_TG);
+ list_add_leaf_cfs_rq(cfs_rq);
+ continue;
+ }
- update_load_avg(cfs_rq, se, UPDATE_TG);
+ if (list_add_leaf_cfs_rq(cfs_rq))
+ break;
}
}
#else
--
2.30.2
From: Eric Dumazet <[email protected]>
[ Upstream commit a54754ec9891830ba548e2010c889e3c8146e449 ]
Number of buckets being stored in 32bit variables, we have to
ensure that no overflows occur in nft_hash_buckets()
syzbot injected a size == 0x40000000 and reported:
UBSAN: shift-out-of-bounds in ./include/linux/log2.h:57:13
shift exponent 64 is too large for 64-bit type 'long unsigned int'
CPU: 1 PID: 29539 Comm: syz-executor.4 Not tainted 5.12.0-rc7-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:79 [inline]
dump_stack+0x141/0x1d7 lib/dump_stack.c:120
ubsan_epilogue+0xb/0x5a lib/ubsan.c:148
__ubsan_handle_shift_out_of_bounds.cold+0xb1/0x181 lib/ubsan.c:327
__roundup_pow_of_two include/linux/log2.h:57 [inline]
nft_hash_buckets net/netfilter/nft_set_hash.c:411 [inline]
nft_hash_estimate.cold+0x19/0x1e net/netfilter/nft_set_hash.c:652
nft_select_set_ops net/netfilter/nf_tables_api.c:3586 [inline]
nf_tables_newset+0xe62/0x3110 net/netfilter/nf_tables_api.c:4322
nfnetlink_rcv_batch+0xa09/0x24b0 net/netfilter/nfnetlink.c:488
nfnetlink_rcv_skb_batch net/netfilter/nfnetlink.c:612 [inline]
nfnetlink_rcv+0x3af/0x420 net/netfilter/nfnetlink.c:630
netlink_unicast_kernel net/netlink/af_netlink.c:1312 [inline]
netlink_unicast+0x533/0x7d0 net/netlink/af_netlink.c:1338
netlink_sendmsg+0x856/0xd90 net/netlink/af_netlink.c:1927
sock_sendmsg_nosec net/socket.c:654 [inline]
sock_sendmsg+0xcf/0x120 net/socket.c:674
____sys_sendmsg+0x6e8/0x810 net/socket.c:2350
___sys_sendmsg+0xf3/0x170 net/socket.c:2404
__sys_sendmsg+0xe5/0x1b0 net/socket.c:2433
do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46
Fixes: 0ed6389c483d ("netfilter: nf_tables: rename set implementations")
Signed-off-by: Eric Dumazet <[email protected]>
Reported-by: syzbot <[email protected]>
Signed-off-by: Pablo Neira Ayuso <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/netfilter/nft_set_hash.c | 10 +++++++++-
1 file changed, 9 insertions(+), 1 deletion(-)
diff --git a/net/netfilter/nft_set_hash.c b/net/netfilter/nft_set_hash.c
index b331a3c9a3a8..9de0eb20e954 100644
--- a/net/netfilter/nft_set_hash.c
+++ b/net/netfilter/nft_set_hash.c
@@ -393,9 +393,17 @@ static void nft_rhash_destroy(const struct nft_set *set)
(void *)set);
}
+/* Number of buckets is stored in u32, so cap our result to 1U<<31 */
+#define NFT_MAX_BUCKETS (1U << 31)
+
static u32 nft_hash_buckets(u32 size)
{
- return roundup_pow_of_two(size * 4 / 3);
+ u64 val = div_u64((u64)size * 4, 3);
+
+ if (val >= NFT_MAX_BUCKETS)
+ return NFT_MAX_BUCKETS;
+
+ return roundup_pow_of_two(val);
}
static bool nft_rhash_estimate(const struct nft_set_desc *desc, u32 features,
--
2.30.2
From: Yunjian Wang <[email protected]>
[ Upstream commit 38318f23a7ef86a8b1862e5e8078c4de121960c3 ]
Currently the call to i40e_client_del_instance frees the object
pf->cinst, however pf->cinst->lan_info is being accessed after
the free. Fix this by adding the missing return.
Addresses-Coverity: ("Read from pointer after free")
Fixes: 7b0b1a6d0ac9 ("i40e: Disable iWARP VSI PETCP_ENA flag on netdev down events")
Signed-off-by: Yunjian Wang <[email protected]>
Signed-off-by: Tony Nguyen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/intel/i40e/i40e_client.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/net/ethernet/intel/i40e/i40e_client.c b/drivers/net/ethernet/intel/i40e/i40e_client.c
index e81530ca08d0..5706abb3c0ea 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_client.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_client.c
@@ -377,6 +377,7 @@ void i40e_client_subtask(struct i40e_pf *pf)
clear_bit(__I40E_CLIENT_INSTANCE_OPENED,
&cdev->state);
i40e_client_del_instance(pf);
+ return;
}
}
}
--
2.30.2
From: Yufeng Mo <[email protected]>
[ Upstream commit 472497d0bdae890a896013332a0b673f9acdf2bf ]
If selftest and reset are performed at the same time, the phy
loopback setting may be still in enable state after the reset,
and device cannot link up. So fix this issue by disabling phy
loopback before phy_start().
Fixes: 256727da7395 ("net: hns3: Add MDIO support to HNS3 Ethernet driver for hip08 SoC")
Signed-off-by: Yufeng Mo <[email protected]>
Signed-off-by: Huazhong Tan <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mdio.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mdio.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mdio.c
index dc4dfd4602ab..c8f979c55fec 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mdio.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mdio.c
@@ -255,6 +255,8 @@ void hclge_mac_start_phy(struct hclge_dev *hdev)
if (!phydev)
return;
+ phy_loopback(phydev, false);
+
phy_start(phydev);
}
--
2.30.2
From: Jia-Ju Bai <[email protected]>
[ Upstream commit 31d82c2c787d5cf65fedd35ebbc0c1bd95c1a679 ]
When vzalloc() returns NULL to sha_regions, no error return code of
kexec_calculate_store_digests() is assigned. To fix this bug, ret is
assigned with -ENOMEM in this case.
Link: https://lkml.kernel.org/r/[email protected]
Fixes: a43cac0d9dc2 ("kexec: split kexec_file syscall code to kexec_file.c")
Signed-off-by: Jia-Ju Bai <[email protected]>
Reported-by: TOTE Robot <[email protected]>
Acked-by: Baoquan He <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
kernel/kexec_file.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/kernel/kexec_file.c b/kernel/kexec_file.c
index 4e74db89bd23..b17998fa03f1 100644
--- a/kernel/kexec_file.c
+++ b/kernel/kexec_file.c
@@ -740,8 +740,10 @@ static int kexec_calculate_store_digests(struct kimage *image)
sha_region_sz = KEXEC_SEGMENT_MAX * sizeof(struct kexec_sha_region);
sha_regions = vzalloc(sha_region_sz);
- if (!sha_regions)
+ if (!sha_regions) {
+ ret = -ENOMEM;
goto out_free_desc;
+ }
desc->tfm = tfm;
--
2.30.2
From: Vineet Gupta <[email protected]>
commit 3433adc8bd09fc9f29b8baddf33b4ecd1ecd2cdc upstream.
We have NR_syscall syscalls from [0 .. NR_syscall-1].
However the check for invalid syscall number is "> NR_syscall" as
opposed to >=. This off-by-one error erronesously allows "NR_syscall"
to be treated as valid syscall causeing out-of-bounds access into
syscall-call table ensuing a crash (holes within syscall table have a
invalid-entry handler but this is beyond the array implementing the
table).
This problem showed up on v5.6 kernel when testing glibc 2.33 (v5.10
kernel capable, includng faccessat2 syscall 439). The v5.6 kernel has
NR_syscalls=439 (0 to 438). Due to the bug, 439 passed by glibc was
not handled as -ENOSYS but processed leading to a crash.
Link: https://github.com/foss-for-synopsys-dwc-arc-processors/linux/issues/48
Reported-by: Shahab Vahedi <[email protected]>
Cc: <[email protected]>
Signed-off-by: Vineet Gupta <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/arc/kernel/entry.S | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/arch/arc/kernel/entry.S
+++ b/arch/arc/kernel/entry.S
@@ -165,7 +165,7 @@ tracesys:
; Do the Sys Call as we normally would.
; Validate the Sys Call number
- cmp r8, NR_syscalls
+ cmp r8, NR_syscalls - 1
mov.hi r0, -ENOSYS
bhi tracesys_exit
@@ -243,7 +243,7 @@ ENTRY(EV_Trap)
;============ Normal syscall case
; syscall num shd not exceed the total system calls avail
- cmp r8, NR_syscalls
+ cmp r8, NR_syscalls - 1
mov.hi r0, -ENOSYS
bhi .Lret_from_system_call
From: Vladimir Isaev <[email protected]>
commit c5f756d8c6265ebb1736a7787231f010a3b782e5 upstream.
32-bit PAGE_MASK can not be used as a mask for physical addresses
when PAE is enabled. PAGE_MASK_PHYS must be used for physical
addresses instead of PAGE_MASK.
Without this, init gets SIGSEGV if pte_modify was called:
| potentially unexpected fatal signal 11.
| Path: /bin/busybox
| CPU: 0 PID: 1 Comm: init Not tainted 5.12.0-rc5-00003-g1e43c377a79f-dirty
| Insn could not be fetched
| @No matching VMA found
| ECR: 0x00040000 EFA: 0x00000000 ERET: 0x00000000
| STAT: 0x80080082 [IE U ] BTA: 0x00000000
| SP: 0x5f9ffe44 FP: 0x00000000 BLK: 0xaf3d4
| LPS: 0x000d093e LPE: 0x000d0950 LPC: 0x00000000
| r00: 0x00000002 r01: 0x5f9fff14 r02: 0x5f9fff20
| ...
| Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b
Signed-off-by: Vladimir Isaev <[email protected]>
Reported-by: kernel test robot <[email protected]>
Cc: Vineet Gupta <[email protected]>
Cc: [email protected]
Signed-off-by: Vineet Gupta <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/arc/include/asm/page.h | 12 ++++++++++++
arch/arc/include/asm/pgtable.h | 12 +++---------
arch/arc/include/uapi/asm/page.h | 1 -
arch/arc/mm/ioremap.c | 5 +++--
arch/arc/mm/tlb.c | 2 +-
5 files changed, 19 insertions(+), 13 deletions(-)
--- a/arch/arc/include/asm/page.h
+++ b/arch/arc/include/asm/page.h
@@ -7,6 +7,18 @@
#include <uapi/asm/page.h>
+#ifdef CONFIG_ARC_HAS_PAE40
+
+#define MAX_POSSIBLE_PHYSMEM_BITS 40
+#define PAGE_MASK_PHYS (0xff00000000ull | PAGE_MASK)
+
+#else /* CONFIG_ARC_HAS_PAE40 */
+
+#define MAX_POSSIBLE_PHYSMEM_BITS 32
+#define PAGE_MASK_PHYS PAGE_MASK
+
+#endif /* CONFIG_ARC_HAS_PAE40 */
+
#ifndef __ASSEMBLY__
#define clear_page(paddr) memset((paddr), 0, PAGE_SIZE)
--- a/arch/arc/include/asm/pgtable.h
+++ b/arch/arc/include/asm/pgtable.h
@@ -108,8 +108,8 @@
#define ___DEF (_PAGE_PRESENT | _PAGE_CACHEABLE)
/* Set of bits not changed in pte_modify */
-#define _PAGE_CHG_MASK (PAGE_MASK | _PAGE_ACCESSED | _PAGE_DIRTY | _PAGE_SPECIAL)
-
+#define _PAGE_CHG_MASK (PAGE_MASK_PHYS | _PAGE_ACCESSED | _PAGE_DIRTY | \
+ _PAGE_SPECIAL)
/* More Abbrevaited helpers */
#define PAGE_U_NONE __pgprot(___DEF)
#define PAGE_U_R __pgprot(___DEF | _PAGE_READ)
@@ -133,13 +133,7 @@
#define PTE_BITS_IN_PD0 (_PAGE_GLOBAL | _PAGE_PRESENT | _PAGE_HW_SZ)
#define PTE_BITS_RWX (_PAGE_EXECUTE | _PAGE_WRITE | _PAGE_READ)
-#ifdef CONFIG_ARC_HAS_PAE40
-#define PTE_BITS_NON_RWX_IN_PD1 (0xff00000000 | PAGE_MASK | _PAGE_CACHEABLE)
-#define MAX_POSSIBLE_PHYSMEM_BITS 40
-#else
-#define PTE_BITS_NON_RWX_IN_PD1 (PAGE_MASK | _PAGE_CACHEABLE)
-#define MAX_POSSIBLE_PHYSMEM_BITS 32
-#endif
+#define PTE_BITS_NON_RWX_IN_PD1 (PAGE_MASK_PHYS | _PAGE_CACHEABLE)
/**************************************************************************
* Mapping of vm_flags (Generic VM) to PTE flags (arch specific)
--- a/arch/arc/include/uapi/asm/page.h
+++ b/arch/arc/include/uapi/asm/page.h
@@ -33,5 +33,4 @@
#define PAGE_MASK (~(PAGE_SIZE-1))
-
#endif /* _UAPI__ASM_ARC_PAGE_H */
--- a/arch/arc/mm/ioremap.c
+++ b/arch/arc/mm/ioremap.c
@@ -53,9 +53,10 @@ EXPORT_SYMBOL(ioremap);
void __iomem *ioremap_prot(phys_addr_t paddr, unsigned long size,
unsigned long flags)
{
+ unsigned int off;
unsigned long vaddr;
struct vm_struct *area;
- phys_addr_t off, end;
+ phys_addr_t end;
pgprot_t prot = __pgprot(flags);
/* Don't allow wraparound, zero size */
@@ -72,7 +73,7 @@ void __iomem *ioremap_prot(phys_addr_t p
/* Mappings have to be page-aligned */
off = paddr & ~PAGE_MASK;
- paddr &= PAGE_MASK;
+ paddr &= PAGE_MASK_PHYS;
size = PAGE_ALIGN(end + 1) - paddr;
/*
--- a/arch/arc/mm/tlb.c
+++ b/arch/arc/mm/tlb.c
@@ -597,7 +597,7 @@ void update_mmu_cache(struct vm_area_str
pte_t *ptep)
{
unsigned long vaddr = vaddr_unaligned & PAGE_MASK;
- phys_addr_t paddr = pte_val(*ptep) & PAGE_MASK;
+ phys_addr_t paddr = pte_val(*ptep) & PAGE_MASK_PHYS;
struct page *page = pfn_to_page(pte_pfn(*ptep));
create_tlb(vma, vaddr, ptep);
From: Michael Ellerman <[email protected]>
commit 8ec7791bae1327b1c279c5cd6e929c3b12daaf0a upstream.
The STF (store-to-load forwarding) barrier mitigation can be
enabled/disabled at runtime via a debugfs file (stf_barrier), which
causes the kernel to patch itself to enable/disable the relevant
mitigations.
However depending on which mitigation we're using, it may not be safe to
do that patching while other CPUs are active. For example the following
crash:
User access of kernel address (c00000003fff5af0) - exploit attempt? (uid: 0)
segfault (11) at c00000003fff5af0 nip 7fff8ad12198 lr 7fff8ad121f8 code 1
code: 40820128 e93c00d0 e9290058 7c292840 40810058 38600000 4bfd9a81 e8410018
code: 2c030006 41810154 3860ffb6 e9210098 <e94d8ff0> 7d295279 39400000 40820a3c
Shows that we returned to userspace without restoring the user r13
value, due to executing the partially patched STF exit code.
Fix it by doing the patching under stop machine. The CPUs that aren't
doing the patching will be spinning in the core of the stop machine
logic. That is currently sufficient for our purposes, because none of
the patching we do is to that code or anywhere in the vicinity.
Fixes: a048a07d7f45 ("powerpc/64s: Add support for a store forwarding barrier at kernel entry/exit")
Cc: [email protected] # v4.17+
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/powerpc/lib/feature-fixups.c | 19 +++++++++++++++++--
1 file changed, 17 insertions(+), 2 deletions(-)
--- a/arch/powerpc/lib/feature-fixups.c
+++ b/arch/powerpc/lib/feature-fixups.c
@@ -14,6 +14,7 @@
#include <linux/string.h>
#include <linux/init.h>
#include <linux/sched/mm.h>
+#include <linux/stop_machine.h>
#include <asm/cputable.h>
#include <asm/code-patching.h>
#include <asm/page.h>
@@ -221,11 +222,25 @@ static void do_stf_exit_barrier_fixups(e
: "unknown");
}
+static int __do_stf_barrier_fixups(void *data)
+{
+ enum stf_barrier_type *types = data;
+
+ do_stf_entry_barrier_fixups(*types);
+ do_stf_exit_barrier_fixups(*types);
+
+ return 0;
+}
void do_stf_barrier_fixups(enum stf_barrier_type types)
{
- do_stf_entry_barrier_fixups(types);
- do_stf_exit_barrier_fixups(types);
+ /*
+ * The call to the fallback entry flush, and the fallback/sync-ori exit
+ * flush can not be safely patched in/out while other CPUs are executing
+ * them. So call __do_stf_barrier_fixups() on one CPU while all other CPUs
+ * spin in the stop machine core with interrupts hard disabled.
+ */
+ stop_machine(__do_stf_barrier_fixups, &types, NULL);
}
void do_uaccess_flush_fixups(enum l1d_flush_type types)
From: Phillip Lougher <[email protected]>
commit d6e621de1fceb3b098ebf435ef7ea91ec4838a1a upstream.
Sysbot has reported a "divide error" which has been identified as being
caused by a corrupted file_size value within the file inode. This value
has been corrupted to a much larger value than expected.
Calculate_skip() is passed i_size_read(inode) >> msblk->block_log. Due to
the file_size value corruption this overflows the int argument/variable in
that function, leading to the divide error.
This patch changes the function to use u64. This will accommodate any
unexpectedly large values due to corruption.
The value returned from calculate_skip() is clamped to be never more than
SQUASHFS_CACHED_BLKS - 1, or 7. So file_size corruption does not lead to
an unexpectedly large return result here.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Phillip Lougher <[email protected]>
Reported-by: <[email protected]>
Reported-by: <[email protected]>
Cc: <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/squashfs/file.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
--- a/fs/squashfs/file.c
+++ b/fs/squashfs/file.c
@@ -211,11 +211,11 @@ failure:
* If the skip factor is limited in this way then the file will use multiple
* slots.
*/
-static inline int calculate_skip(int blocks)
+static inline int calculate_skip(u64 blocks)
{
- int skip = blocks / ((SQUASHFS_META_ENTRIES + 1)
+ u64 skip = blocks / ((SQUASHFS_META_ENTRIES + 1)
* SQUASHFS_META_INDEXES);
- return min(SQUASHFS_CACHED_BLKS - 1, skip + 1);
+ return min((u64) SQUASHFS_CACHED_BLKS - 1, skip + 1);
}
From: Jouni Roivas <[email protected]>
commit c3187cf32216313fb316084efac4dab3a8459b1d upstream.
I believe there are some issues introduced by commit 31651c607151
("hfsplus: avoid deadlock on file truncation")
HFS+ has extent records which always contains 8 extents. In case the
first extent record in catalog file gets full, new ones are allocated from
extents overflow file.
In case shrinking truncate happens to middle of an extent record which
locates in extents overflow file, the logic in hfsplus_file_truncate() was
changed so that call to hfs_brec_remove() is not guarded any more.
Right action would be just freeing the extents that exceed the new size
inside extent record by calling hfsplus_free_extents(), and then check if
the whole extent record should be removed. However since the guard
(blk_cnt > start) is now after the call to hfs_brec_remove(), this has
unfortunate effect that the last matching extent record is removed
unconditionally.
To reproduce this issue, create a file which has at least 10 extents, and
then perform shrinking truncate into middle of the last extent record, so
that the number of remaining extents is not under or divisible by 8. This
causes the last extent record (8 extents) to be removed totally instead of
truncating into middle of it. Thus this causes corruption, and lost data.
Fix for this is simply checking if the new truncated end is below the
start of this extent record, making it safe to remove the full extent
record. However call to hfs_brec_remove() can't be moved to it's previous
place since we're dropping ->tree_lock and it can cause a race condition
and the cached info being invalidated possibly corrupting the node data.
Another issue is related to this one. When entering into the block
(blk_cnt > start) we are not holding the ->tree_lock. We break out from
the loop not holding the lock, but hfs_find_exit() does unlock it. Not
sure if it's possible for someone else to take the lock under our feet,
but it can cause hard to debug errors and premature unlocking. Even if
there's no real risk of it, the locking should still always be kept in
balance. Thus taking the lock now just before the check.
Link: https://lkml.kernel.org/r/[email protected]
Fixes: 31651c607151f ("hfsplus: avoid deadlock on file truncation")
Signed-off-by: Jouni Roivas <[email protected]>
Reviewed-by: Anton Altaparmakov <[email protected]>
Cc: Anatoly Trosinenko <[email protected]>
Cc: Viacheslav Dubeyko <[email protected]>
Cc: <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/hfsplus/extents.c | 7 ++++---
1 file changed, 4 insertions(+), 3 deletions(-)
--- a/fs/hfsplus/extents.c
+++ b/fs/hfsplus/extents.c
@@ -598,13 +598,15 @@ void hfsplus_file_truncate(struct inode
res = __hfsplus_ext_cache_extent(&fd, inode, alloc_cnt);
if (res)
break;
- hfs_brec_remove(&fd);
- mutex_unlock(&fd.tree->tree_lock);
start = hip->cached_start;
+ if (blk_cnt <= start)
+ hfs_brec_remove(&fd);
+ mutex_unlock(&fd.tree->tree_lock);
hfsplus_free_extents(sb, hip->cached_extents,
alloc_cnt - start, alloc_cnt - blk_cnt);
hfsplus_dump_extent(hip->cached_extents);
+ mutex_lock(&fd.tree->tree_lock);
if (blk_cnt > start) {
hip->extent_state |= HFSPLUS_EXT_DIRTY;
break;
@@ -612,7 +614,6 @@ void hfsplus_file_truncate(struct inode
alloc_cnt = start;
hip->cached_start = hip->cached_blocks = 0;
hip->extent_state &= ~(HFSPLUS_EXT_DIRTY | HFSPLUS_EXT_NEW);
- mutex_lock(&fd.tree->tree_lock);
}
hfs_find_exit(&fd);
From: Michael Ellerman <[email protected]>
commit aec86b052df6541cc97c5fca44e5934cbea4963b upstream.
The entry flush mitigation can be enabled/disabled at runtime via a
debugfs file (entry_flush), which causes the kernel to patch itself to
enable/disable the relevant mitigations.
However depending on which mitigation we're using, it may not be safe to
do that patching while other CPUs are active. For example the following
crash:
sleeper[15639]: segfault (11) at c000000000004c20 nip c000000000004c20 lr c000000000004c20
Shows that we returned to userspace with a corrupted LR that points into
the kernel, due to executing the partially patched call to the fallback
entry flush (ie. we missed the LR restore).
Fix it by doing the patching under stop machine. The CPUs that aren't
doing the patching will be spinning in the core of the stop machine
logic. That is currently sufficient for our purposes, because none of
the patching we do is to that code or anywhere in the vicinity.
Fixes: f79643787e0a ("powerpc/64s: flush L1D on kernel entry")
Cc: [email protected] # v5.10+
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/powerpc/lib/feature-fixups.c | 16 +++++++++++++++-
1 file changed, 15 insertions(+), 1 deletion(-)
--- a/arch/powerpc/lib/feature-fixups.c
+++ b/arch/powerpc/lib/feature-fixups.c
@@ -293,8 +293,9 @@ void do_uaccess_flush_fixups(enum l1d_fl
: "unknown");
}
-void do_entry_flush_fixups(enum l1d_flush_type types)
+static int __do_entry_flush_fixups(void *data)
{
+ enum l1d_flush_type types = *(enum l1d_flush_type *)data;
unsigned int instrs[3], *dest;
long *start, *end;
int i;
@@ -345,6 +346,19 @@ void do_entry_flush_fixups(enum l1d_flus
: "ori type" :
(types & L1D_FLUSH_MTTRIG) ? "mttrig type"
: "unknown");
+
+ return 0;
+}
+
+void do_entry_flush_fixups(enum l1d_flush_type types)
+{
+ /*
+ * The call to the fallback flush can not be safely patched in/out while
+ * other CPUs are executing it. So call __do_entry_flush_fixups() on one
+ * CPU while all other CPUs spin in the stop machine core with interrupts
+ * hard disabled.
+ */
+ stop_machine(__do_entry_flush_fixups, &types, NULL);
}
void do_rfi_flush_fixups(enum l1d_flush_type types)
From: Peter Xu <[email protected]>
commit 22247efd822e6d263f3c8bd327f3f769aea9b1d9 upstream.
Patch series "mm/hugetlb: Fix issues on file sealing and fork", v2.
Hugh reported issue with F_SEAL_FUTURE_WRITE not applied correctly to
hugetlbfs, which I can easily verify using the memfd_test program, which
seems that the program is hardly run with hugetlbfs pages (as by default
shmem).
Meanwhile I found another probably even more severe issue on that hugetlb
fork won't wr-protect child cow pages, so child can potentially write to
parent private pages. Patch 2 addresses that.
After this series applied, "memfd_test hugetlbfs" should start to pass.
This patch (of 2):
F_SEAL_FUTURE_WRITE is missing for hugetlb starting from the first day.
There is a test program for that and it fails constantly.
$ ./memfd_test hugetlbfs
memfd-hugetlb: CREATE
memfd-hugetlb: BASIC
memfd-hugetlb: SEAL-WRITE
memfd-hugetlb: SEAL-FUTURE-WRITE
mmap() didn't fail as expected
Aborted (core dumped)
I think it's probably because no one is really running the hugetlbfs test.
Fix it by checking FUTURE_WRITE also in hugetlbfs_file_mmap() as what we
do in shmem_mmap(). Generalize a helper for that.
Link: https://lkml.kernel.org/r/[email protected]
Link: https://lkml.kernel.org/r/[email protected]
Fixes: ab3948f58ff84 ("mm/memfd: add an F_SEAL_FUTURE_WRITE seal to memfd")
Signed-off-by: Peter Xu <[email protected]>
Reported-by: Hugh Dickins <[email protected]>
Reviewed-by: Mike Kravetz <[email protected]>
Cc: Joel Fernandes (Google) <[email protected]>
Cc: <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/hugetlbfs/inode.c | 5 +++++
include/linux/mm.h | 32 ++++++++++++++++++++++++++++++++
mm/shmem.c | 22 ++++------------------
3 files changed, 41 insertions(+), 18 deletions(-)
--- a/fs/hugetlbfs/inode.c
+++ b/fs/hugetlbfs/inode.c
@@ -135,6 +135,7 @@ static void huge_pagevec_release(struct
static int hugetlbfs_file_mmap(struct file *file, struct vm_area_struct *vma)
{
struct inode *inode = file_inode(file);
+ struct hugetlbfs_inode_info *info = HUGETLBFS_I(inode);
loff_t len, vma_len;
int ret;
struct hstate *h = hstate_file(file);
@@ -150,6 +151,10 @@ static int hugetlbfs_file_mmap(struct fi
vma->vm_flags |= VM_HUGETLB | VM_DONTEXPAND;
vma->vm_ops = &hugetlb_vm_ops;
+ ret = seal_check_future_write(info->seals, vma);
+ if (ret)
+ return ret;
+
/*
* page based offset in vm_pgoff could be sufficiently large to
* overflow a loff_t when converted to byte offset. This can
--- a/include/linux/mm.h
+++ b/include/linux/mm.h
@@ -2925,5 +2925,37 @@ static inline int pages_identical(struct
return !memcmp_pages(page1, page2);
}
+/**
+ * seal_check_future_write - Check for F_SEAL_FUTURE_WRITE flag and handle it
+ * @seals: the seals to check
+ * @vma: the vma to operate on
+ *
+ * Check whether F_SEAL_FUTURE_WRITE is set; if so, do proper check/handling on
+ * the vma flags. Return 0 if check pass, or <0 for errors.
+ */
+static inline int seal_check_future_write(int seals, struct vm_area_struct *vma)
+{
+ if (seals & F_SEAL_FUTURE_WRITE) {
+ /*
+ * New PROT_WRITE and MAP_SHARED mmaps are not allowed when
+ * "future write" seal active.
+ */
+ if ((vma->vm_flags & VM_SHARED) && (vma->vm_flags & VM_WRITE))
+ return -EPERM;
+
+ /*
+ * Since an F_SEAL_FUTURE_WRITE sealed memfd can be mapped as
+ * MAP_SHARED and read-only, take care to not allow mprotect to
+ * revert protections on such mappings. Do this only for shared
+ * mappings. For private mappings, don't need to mask
+ * VM_MAYWRITE as we still want them to be COW-writable.
+ */
+ if (vma->vm_flags & VM_SHARED)
+ vma->vm_flags &= ~(VM_MAYWRITE);
+ }
+
+ return 0;
+}
+
#endif /* __KERNEL__ */
#endif /* _LINUX_MM_H */
--- a/mm/shmem.c
+++ b/mm/shmem.c
@@ -2208,25 +2208,11 @@ out_nomem:
static int shmem_mmap(struct file *file, struct vm_area_struct *vma)
{
struct shmem_inode_info *info = SHMEM_I(file_inode(file));
+ int ret;
- if (info->seals & F_SEAL_FUTURE_WRITE) {
- /*
- * New PROT_WRITE and MAP_SHARED mmaps are not allowed when
- * "future write" seal active.
- */
- if ((vma->vm_flags & VM_SHARED) && (vma->vm_flags & VM_WRITE))
- return -EPERM;
-
- /*
- * Since an F_SEAL_FUTURE_WRITE sealed memfd can be mapped as
- * MAP_SHARED and read-only, take care to not allow mprotect to
- * revert protections on such mappings. Do this only for shared
- * mappings. For private mappings, don't need to mask
- * VM_MAYWRITE as we still want them to be COW-writable.
- */
- if (vma->vm_flags & VM_SHARED)
- vma->vm_flags &= ~(VM_MAYWRITE);
- }
+ ret = seal_check_future_write(info->seals, vma);
+ if (ret)
+ return ret;
file_accessed(file);
vma->vm_ops = &shmem_vm_ops;
From: Axel Rasmussen <[email protected]>
commit 7ed9d238c7dbb1fdb63ad96a6184985151b0171c upstream.
Consider the following sequence of events:
1. Userspace issues a UFFD ioctl, which ends up calling into
shmem_mfill_atomic_pte(). We successfully account the blocks, we
shmem_alloc_page(), but then the copy_from_user() fails. We return
-ENOENT. We don't release the page we allocated.
2. Our caller detects this error code, tries the copy_from_user() after
dropping the mmap_lock, and retries, calling back into
shmem_mfill_atomic_pte().
3. Meanwhile, let's say another process filled up the tmpfs being used.
4. So shmem_mfill_atomic_pte() fails to account blocks this time, and
immediately returns - without releasing the page.
This triggers a BUG_ON in our caller, which asserts that the page
should always be consumed, unless -ENOENT is returned.
To fix this, detect if we have such a "dangling" page when accounting
fails, and if so, release it before returning.
Link: https://lkml.kernel.org/r/[email protected]
Fixes: cb658a453b93 ("userfaultfd: shmem: avoid leaking blocks and used blocks in UFFDIO_COPY")
Signed-off-by: Axel Rasmussen <[email protected]>
Reported-by: Hugh Dickins <[email protected]>
Acked-by: Hugh Dickins <[email protected]>
Reviewed-by: Peter Xu <[email protected]>
Cc: <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
mm/shmem.c | 12 +++++++++++-
1 file changed, 11 insertions(+), 1 deletion(-)
--- a/mm/shmem.c
+++ b/mm/shmem.c
@@ -2327,8 +2327,18 @@ static int shmem_mfill_atomic_pte(struct
pgoff_t offset, max_off;
ret = -ENOMEM;
- if (!shmem_inode_acct_block(inode, 1))
+ if (!shmem_inode_acct_block(inode, 1)) {
+ /*
+ * We may have got a page, returned -ENOENT triggering a retry,
+ * and now we find ourselves with -ENOMEM. Release the page, to
+ * avoid a BUG_ON in our caller.
+ */
+ if (unlikely(*pagep)) {
+ put_page(*pagep);
+ *pagep = NULL;
+ }
goto out;
+ }
if (!*pagep) {
page = shmem_alloc_page(gfp, info, pgoff);
From: Dinghao Liu <[email protected]>
[ Upstream commit a2fa9242e89f27696515699fe0f0296bf1ac1815 ]
When lidar_write_control() fails, a pairing PM usage counter
decrement is needed to keep the counter balanced.
Fixes: 4ac4e086fd8c5 ("iio: pulsedlight-lidar-lite: add runtime PM")
Signed-off-by: Dinghao Liu <[email protected]>
Reviewed-by: Andy Shevchenko <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jonathan Cameron <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/iio/proximity/pulsedlight-lidar-lite-v2.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/iio/proximity/pulsedlight-lidar-lite-v2.c b/drivers/iio/proximity/pulsedlight-lidar-lite-v2.c
index 47af54f14756..67f85268b63d 100644
--- a/drivers/iio/proximity/pulsedlight-lidar-lite-v2.c
+++ b/drivers/iio/proximity/pulsedlight-lidar-lite-v2.c
@@ -158,6 +158,7 @@ static int lidar_get_measurement(struct lidar_data *data, u16 *reg)
ret = lidar_write_control(data, LIDAR_REG_CONTROL_ACQUIRE);
if (ret < 0) {
dev_err(&client->dev, "cannot send start measurement command");
+ pm_runtime_put_noidle(&client->dev);
return ret;
}
--
2.30.2
From: Kai-Heng Feng <[email protected]>
commit 227545b9a08c68778ddd89428f99c351fc9315ac upstream.
Screen flickers rapidly when two 4K 60Hz monitors are in use. This issue
doesn't happen when one monitor is 4K 60Hz (pixelclock 594MHz) and
another one is 4K 30Hz (pixelclock 297MHz).
The issue is gone after setting "power_dpm_force_performance_level" to
"high". Following the indication, we found that the issue occurs when
sclk is too low.
So resolve the issue by disabling sclk switching when there are two
monitors requires high pixelclock (> 297MHz).
v2:
- Only apply the fix to Oland.
Signed-off-by: Kai-Heng Feng <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
Cc: [email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpu/drm/radeon/radeon.h | 1 +
drivers/gpu/drm/radeon/radeon_pm.c | 8 ++++++++
drivers/gpu/drm/radeon/si_dpm.c | 3 +++
3 files changed, 12 insertions(+)
--- a/drivers/gpu/drm/radeon/radeon.h
+++ b/drivers/gpu/drm/radeon/radeon.h
@@ -1554,6 +1554,7 @@ struct radeon_dpm {
void *priv;
u32 new_active_crtcs;
int new_active_crtc_count;
+ int high_pixelclock_count;
u32 current_active_crtcs;
int current_active_crtc_count;
bool single_display;
--- a/drivers/gpu/drm/radeon/radeon_pm.c
+++ b/drivers/gpu/drm/radeon/radeon_pm.c
@@ -1720,6 +1720,7 @@ static void radeon_pm_compute_clocks_dpm
struct drm_device *ddev = rdev->ddev;
struct drm_crtc *crtc;
struct radeon_crtc *radeon_crtc;
+ struct radeon_connector *radeon_connector;
if (!rdev->pm.dpm_enabled)
return;
@@ -1729,6 +1730,7 @@ static void radeon_pm_compute_clocks_dpm
/* update active crtc counts */
rdev->pm.dpm.new_active_crtcs = 0;
rdev->pm.dpm.new_active_crtc_count = 0;
+ rdev->pm.dpm.high_pixelclock_count = 0;
if (rdev->num_crtc && rdev->mode_info.mode_config_initialized) {
list_for_each_entry(crtc,
&ddev->mode_config.crtc_list, head) {
@@ -1736,6 +1738,12 @@ static void radeon_pm_compute_clocks_dpm
if (crtc->enabled) {
rdev->pm.dpm.new_active_crtcs |= (1 << radeon_crtc->crtc_id);
rdev->pm.dpm.new_active_crtc_count++;
+ if (!radeon_crtc->connector)
+ continue;
+
+ radeon_connector = to_radeon_connector(radeon_crtc->connector);
+ if (radeon_connector->pixelclock_for_modeset > 297000)
+ rdev->pm.dpm.high_pixelclock_count++;
}
}
}
--- a/drivers/gpu/drm/radeon/si_dpm.c
+++ b/drivers/gpu/drm/radeon/si_dpm.c
@@ -3002,6 +3002,9 @@ static void si_apply_state_adjust_rules(
(rdev->pdev->device == 0x6605)) {
max_sclk = 75000;
}
+
+ if (rdev->pm.dpm.high_pixelclock_count > 1)
+ disable_sclk_switching = true;
}
if (rps->vce_active) {
From: Ville Syrjälä <[email protected]>
commit 4819d16d91145966ce03818a95169df1fd56b299 upstream.
Gen2 tiles are 2KiB in size so i915_gem_object_get_tile_row_size()
can in fact return <4KiB, which leads to div-by-zero here.
Avoid that.
Not sure i915_gem_object_get_tile_row_size() is entirely
sane anyway since it doesn't account for the different tile
layouts on i8xx/i915...
I'm not able to hit this before commit 6846895fde05 ("drm/i915:
Replace PIN_NONFAULT with calls to PIN_NOEVICT") and it looks
like I also need to run recent version of Mesa. With those in
place xonotic trips on this quite easily on my 85x.
Cc: [email protected]
Reviewed-by: Chris Wilson <[email protected]>
Signed-off-by: Ville Syrjälä <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
(cherry picked from commit ed52c62d386f764194e0184fdb905d5f24194cae)
Signed-off-by: Jani Nikula <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpu/drm/i915/gem/i915_gem_mman.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/gpu/drm/i915/gem/i915_gem_mman.c
+++ b/drivers/gpu/drm/i915/gem/i915_gem_mman.c
@@ -181,7 +181,7 @@ compute_partial_view(const struct drm_i9
struct i915_ggtt_view view;
if (i915_gem_object_is_tiled(obj))
- chunk = roundup(chunk, tile_row_pages(obj));
+ chunk = roundup(chunk, tile_row_pages(obj) ?: 1);
view.type = I915_GGTT_VIEW_PARTIAL;
view.partial.offset = rounddown(page_offset, chunk);
From: Christophe JAILLET <[email protected]>
[ Upstream commit a60a34366e0d09ca002c966dd7c43a68c28b1f82 ]
'retval' is known to be -ENODEV here.
This is a hard-coded default error code which is not useful in the error
message. Moreover, another error message is printed at the end of the
error handling path. The corresponding error code (-ENOMEM) is more
informative.
So remove simplify the first error message.
While at it, also remove the useless initialization of 'retval'.
Fixes: 7d50195f6c50 ("usb: host: Faraday fotg210-hcd driver")
Signed-off-by: Christophe JAILLET <[email protected]>
Link: https://lore.kernel.org/r/94531bcff98e46d4f9c20183a90b7f47f699126c.1620333419.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/usb/host/fotg210-hcd.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/usb/host/fotg210-hcd.c b/drivers/usb/host/fotg210-hcd.c
index 9e0c98d6bdb0..c3f74d6674e1 100644
--- a/drivers/usb/host/fotg210-hcd.c
+++ b/drivers/usb/host/fotg210-hcd.c
@@ -5571,7 +5571,7 @@ static int fotg210_hcd_probe(struct platform_device *pdev)
struct usb_hcd *hcd;
struct resource *res;
int irq;
- int retval = -ENODEV;
+ int retval;
struct fotg210_hcd *fotg210;
if (usb_disabled())
@@ -5591,7 +5591,7 @@ static int fotg210_hcd_probe(struct platform_device *pdev)
hcd = usb_create_hcd(&fotg210_fotg210_hc_driver, dev,
dev_name(dev));
if (!hcd) {
- dev_err(dev, "failed to create hcd with err %d\n", retval);
+ dev_err(dev, "failed to create hcd\n");
retval = -ENOMEM;
goto fail_create_hcd;
}
--
2.30.2
From: Eddie James <[email protected]>
[ Upstream commit 5216dff22dc2bbbbe6f00335f9fd2879670e753b ]
The poll rate limiter time was initialized at zero. This breaks the
comparison in time_after if jiffies is large. Switch to storing the
next update time rather than the previous time, and initialize the
time when the device is probed.
Fixes: c10e753d43eb ("hwmon (occ): Add sensor types and versions")
Signed-off-by: Eddie James <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Guenter Roeck <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/hwmon/occ/common.c | 5 +++--
drivers/hwmon/occ/common.h | 2 +-
2 files changed, 4 insertions(+), 3 deletions(-)
diff --git a/drivers/hwmon/occ/common.c b/drivers/hwmon/occ/common.c
index 30e18eb60da7..0b689ccbb793 100644
--- a/drivers/hwmon/occ/common.c
+++ b/drivers/hwmon/occ/common.c
@@ -209,9 +209,9 @@ int occ_update_response(struct occ *occ)
return rc;
/* limit the maximum rate of polling the OCC */
- if (time_after(jiffies, occ->last_update + OCC_UPDATE_FREQUENCY)) {
+ if (time_after(jiffies, occ->next_update)) {
rc = occ_poll(occ);
- occ->last_update = jiffies;
+ occ->next_update = jiffies + OCC_UPDATE_FREQUENCY;
} else {
rc = occ->last_error;
}
@@ -1089,6 +1089,7 @@ int occ_setup(struct occ *occ, const char *name)
return rc;
}
+ occ->next_update = jiffies + OCC_UPDATE_FREQUENCY;
occ_parse_poll_response(occ);
rc = occ_setup_sensor_attrs(occ);
diff --git a/drivers/hwmon/occ/common.h b/drivers/hwmon/occ/common.h
index 67e6968b8978..e6df719770e8 100644
--- a/drivers/hwmon/occ/common.h
+++ b/drivers/hwmon/occ/common.h
@@ -99,7 +99,7 @@ struct occ {
u8 poll_cmd_data; /* to perform OCC poll command */
int (*send_cmd)(struct occ *occ, u8 *cmd);
- unsigned long last_update;
+ unsigned long next_update;
struct mutex lock; /* lock OCC access */
struct device *hwmon;
--
2.30.2
From: Christophe JAILLET <[email protected]>
[ Upstream commit 0c8bd174f0fc131bc9dfab35cd8784f59045da87 ]
If 'acpi_device_set_name()' fails, we must free
'acpi_device_bus_id->bus_id' or there is a (potential) memory leak.
Fixes: eb50aaf960e3 ("ACPI: scan: Use unique number for instance_no")
Signed-off-by: Christophe JAILLET <[email protected]>
Reviewed-by: Andy Shevchenko <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/acpi/scan.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c
index dbb5919f23e2..95d119ff76b6 100644
--- a/drivers/acpi/scan.c
+++ b/drivers/acpi/scan.c
@@ -706,6 +706,7 @@ int acpi_device_add(struct acpi_device *device,
result = acpi_device_set_name(device, acpi_device_bus_id);
if (result) {
+ kfree_const(acpi_device_bus_id->bus_id);
kfree(acpi_device_bus_id);
goto err_unlock;
}
--
2.30.2
From: Sun Ke <[email protected]>
[ Upstream commit 79ebe9110fa458d58f1fceb078e2068d7ad37390 ]
Open /dev/nbdX first, the config_refs will be 1 and
the pointers in nbd_device are still null. Disconnect
/dev/nbdX, then reference a null recv_workq. The
protection by config_refs in nbd_genl_disconnect is useless.
[ 656.366194] BUG: kernel NULL pointer dereference, address: 0000000000000020
[ 656.368943] #PF: supervisor write access in kernel mode
[ 656.369844] #PF: error_code(0x0002) - not-present page
[ 656.370717] PGD 10cc87067 P4D 10cc87067 PUD 1074b4067 PMD 0
[ 656.371693] Oops: 0002 [#1] SMP
[ 656.372242] CPU: 5 PID: 7977 Comm: nbd-client Not tainted 5.11.0-rc5-00040-g76c057c84d28 #1
[ 656.373661] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ?-20190727_073836-buildvm-ppc64le-16.ppc.fedoraproject.org-3.fc31 04/01/2014
[ 656.375904] RIP: 0010:mutex_lock+0x29/0x60
[ 656.376627] Code: 00 0f 1f 44 00 00 55 48 89 fd 48 83 05 6f d7 fe 08 01 e8 7a c3 ff ff 48 83 05 6a d7 fe 08 01 31 c0 65 48 8b 14 25 00 6d 01 00 <f0> 48 0f b1 55 d
[ 656.378934] RSP: 0018:ffffc900005eb9b0 EFLAGS: 00010246
[ 656.379350] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000
[ 656.379915] RDX: ffff888104cf2600 RSI: ffffffffaae8f452 RDI: 0000000000000020
[ 656.380473] RBP: 0000000000000020 R08: 0000000000000000 R09: ffff88813bd6b318
[ 656.381039] R10: 00000000000000c7 R11: fefefefefefefeff R12: ffff888102710b40
[ 656.381599] R13: ffffc900005eb9e0 R14: ffffffffb2930680 R15: ffff88810770ef00
[ 656.382166] FS: 00007fdf117ebb40(0000) GS:ffff88813bd40000(0000) knlGS:0000000000000000
[ 656.382806] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 656.383261] CR2: 0000000000000020 CR3: 0000000100c84000 CR4: 00000000000006e0
[ 656.383819] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 656.384370] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 656.384927] Call Trace:
[ 656.385111] flush_workqueue+0x92/0x6c0
[ 656.385395] nbd_disconnect_and_put+0x81/0xd0
[ 656.385716] nbd_genl_disconnect+0x125/0x2a0
[ 656.386034] genl_family_rcv_msg_doit.isra.0+0x102/0x1b0
[ 656.386422] genl_rcv_msg+0xfc/0x2b0
[ 656.386685] ? nbd_ioctl+0x490/0x490
[ 656.386954] ? genl_family_rcv_msg_doit.isra.0+0x1b0/0x1b0
[ 656.387354] netlink_rcv_skb+0x62/0x180
[ 656.387638] genl_rcv+0x34/0x60
[ 656.387874] netlink_unicast+0x26d/0x590
[ 656.388162] netlink_sendmsg+0x398/0x6c0
[ 656.388451] ? netlink_rcv_skb+0x180/0x180
[ 656.388750] ____sys_sendmsg+0x1da/0x320
[ 656.389038] ? ____sys_recvmsg+0x130/0x220
[ 656.389334] ___sys_sendmsg+0x8e/0xf0
[ 656.389605] ? ___sys_recvmsg+0xa2/0xf0
[ 656.389889] ? handle_mm_fault+0x1671/0x21d0
[ 656.390201] __sys_sendmsg+0x6d/0xe0
[ 656.390464] __x64_sys_sendmsg+0x23/0x30
[ 656.390751] do_syscall_64+0x45/0x70
[ 656.391017] entry_SYSCALL_64_after_hwframe+0x44/0xa9
To fix it, just add if (nbd->recv_workq) to nbd_disconnect_and_put().
Fixes: e9e006f5fcf2 ("nbd: fix max number of supported devs")
Signed-off-by: Sun Ke <[email protected]>
Reviewed-by: Josef Bacik <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jens Axboe <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/block/nbd.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/block/nbd.c b/drivers/block/nbd.c
index e11fddcb73b9..839364371f9a 100644
--- a/drivers/block/nbd.c
+++ b/drivers/block/nbd.c
@@ -2016,7 +2016,8 @@ static void nbd_disconnect_and_put(struct nbd_device *nbd)
* config ref and try to destroy the workqueue from inside the work
* queue.
*/
- flush_workqueue(nbd->recv_workq);
+ if (nbd->recv_workq)
+ flush_workqueue(nbd->recv_workq);
if (test_and_clear_bit(NBD_RT_HAS_CONFIG_REF,
&nbd->config->runtime_flags))
nbd_config_put(nbd);
--
2.30.2
From: Bart Van Assche <[email protected]>
[ Upstream commit 630ef623ed26c18a457cdc070cf24014e50129c2 ]
If a tag set is shared across request queues (e.g. SCSI LUNs) then the
block layer core keeps track of the number of active request queues in
tags->active_queues. blk_mq_tag_busy() and blk_mq_tag_idle() update that
atomic counter if the hctx flag BLK_MQ_F_TAG_QUEUE_SHARED is set. Make
sure that blk_mq_exit_queue() calls blk_mq_tag_idle() before that flag is
cleared by blk_mq_del_queue_tag_set().
Cc: Christoph Hellwig <[email protected]>
Cc: Ming Lei <[email protected]>
Cc: Hannes Reinecke <[email protected]>
Fixes: 0d2602ca30e4 ("blk-mq: improve support for shared tags maps")
Signed-off-by: Bart Van Assche <[email protected]>
Reviewed-by: Ming Lei <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jens Axboe <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
block/blk-mq.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
--- a/block/blk-mq.c
+++ b/block/blk-mq.c
@@ -2970,10 +2970,12 @@ EXPORT_SYMBOL(blk_mq_init_allocated_queu
/* tags can _not_ be used after returning from blk_mq_exit_queue */
void blk_mq_exit_queue(struct request_queue *q)
{
- struct blk_mq_tag_set *set = q->tag_set;
+ struct blk_mq_tag_set *set = q->tag_set;
- blk_mq_del_queue_tag_set(q);
+ /* Checks hctx->flags & BLK_MQ_F_TAG_QUEUE_SHARED. */
blk_mq_exit_hw_queues(q, set, set->nr_hw_queues);
+ /* May clear BLK_MQ_F_TAG_QUEUE_SHARED in hctx->flags. */
+ blk_mq_del_queue_tag_set(q);
}
static int __blk_mq_alloc_rq_maps(struct blk_mq_tag_set *set)
From: Jaroslaw Gawin <[email protected]>
[ Upstream commit 61343e6da7810de81d6b826698946ae4f9070819 ]
When FEC mode was changed the link didn't know it because
the link was not reset and new parameters were not negotiated.
Set a flag 'I40E_AQ_PHY_ENABLE_ATOMIC_LINK' in 'abilities'
to restart the link and make it run with the new settings.
Fixes: 1d96340196f1 ("i40e: Add support FEC configuration for Fortville 25G")
Signed-off-by: Jaroslaw Gawin <[email protected]>
Signed-off-by: Mateusz Palczewski <[email protected]>
Tested-by: Dave Switzer <[email protected]>
Signed-off-by: Tony Nguyen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/intel/i40e/i40e_ethtool.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/intel/i40e/i40e_ethtool.c b/drivers/net/ethernet/intel/i40e/i40e_ethtool.c
index b519e5af5ed9..502b4abc0aab 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_ethtool.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_ethtool.c
@@ -1406,7 +1406,8 @@ static int i40e_set_fec_cfg(struct net_device *netdev, u8 fec_cfg)
memset(&config, 0, sizeof(config));
config.phy_type = abilities.phy_type;
- config.abilities = abilities.abilities;
+ config.abilities = abilities.abilities |
+ I40E_AQ_PHY_ENABLE_ATOMIC_LINK;
config.phy_type_ext = abilities.phy_type_ext;
config.link_speed = abilities.link_speed;
config.eee_capability = abilities.eee_capability;
--
2.30.2
From: Omar Sandoval <[email protected]>
[ Upstream commit efed9a3337e341bd0989161b97453b52567bc59d ]
__blk_mq_sched_bio_merge() gets the ctx and hctx for the current CPU and
passes the hctx to ->bio_merge(). kyber_bio_merge() then gets the ctx
for the current CPU again and uses that to get the corresponding Kyber
context in the passed hctx. However, the thread may be preempted between
the two calls to blk_mq_get_ctx(), and the ctx returned the second time
may no longer correspond to the passed hctx. This "works" accidentally
most of the time, but it can cause us to read garbage if the second ctx
came from an hctx with more ctx's than the first one (i.e., if
ctx->index_hw[hctx->type] > hctx->nr_ctx).
This manifested as this UBSAN array index out of bounds error reported
by Jakub:
UBSAN: array-index-out-of-bounds in ../kernel/locking/qspinlock.c:130:9
index 13106 is out of range for type 'long unsigned int [128]'
Call Trace:
dump_stack+0xa4/0xe5
ubsan_epilogue+0x5/0x40
__ubsan_handle_out_of_bounds.cold.13+0x2a/0x34
queued_spin_lock_slowpath+0x476/0x480
do_raw_spin_lock+0x1c2/0x1d0
kyber_bio_merge+0x112/0x180
blk_mq_submit_bio+0x1f5/0x1100
submit_bio_noacct+0x7b0/0x870
submit_bio+0xc2/0x3a0
btrfs_map_bio+0x4f0/0x9d0
btrfs_submit_data_bio+0x24e/0x310
submit_one_bio+0x7f/0xb0
submit_extent_page+0xc4/0x440
__extent_writepage_io+0x2b8/0x5e0
__extent_writepage+0x28d/0x6e0
extent_write_cache_pages+0x4d7/0x7a0
extent_writepages+0xa2/0x110
do_writepages+0x8f/0x180
__writeback_single_inode+0x99/0x7f0
writeback_sb_inodes+0x34e/0x790
__writeback_inodes_wb+0x9e/0x120
wb_writeback+0x4d2/0x660
wb_workfn+0x64d/0xa10
process_one_work+0x53a/0xa80
worker_thread+0x69/0x5b0
kthread+0x20b/0x240
ret_from_fork+0x1f/0x30
Only Kyber uses the hctx, so fix it by passing the request_queue to
->bio_merge() instead. BFQ and mq-deadline just use that, and Kyber can
map the queues itself to avoid the mismatch.
Fixes: a6088845c2bf ("block: kyber: make kyber more friendly with merging")
Reported-by: Jakub Kicinski <[email protected]>
Signed-off-by: Omar Sandoval <[email protected]>
Link: https://lore.kernel.org/r/c7598605401a48d5cfeadebb678abd10af22b83f.1620691329.git.osandov@fb.com
Signed-off-by: Jens Axboe <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
block/bfq-iosched.c | 3 +--
block/blk-mq-sched.c | 8 +++++---
block/kyber-iosched.c | 5 +++--
block/mq-deadline.c | 3 +--
include/linux/elevator.h | 2 +-
5 files changed, 11 insertions(+), 10 deletions(-)
diff --git a/block/bfq-iosched.c b/block/bfq-iosched.c
index c19006d59b79..136232a01f71 100644
--- a/block/bfq-iosched.c
+++ b/block/bfq-iosched.c
@@ -2210,10 +2210,9 @@ static void bfq_remove_request(struct request_queue *q,
}
-static bool bfq_bio_merge(struct blk_mq_hw_ctx *hctx, struct bio *bio,
+static bool bfq_bio_merge(struct request_queue *q, struct bio *bio,
unsigned int nr_segs)
{
- struct request_queue *q = hctx->queue;
struct bfq_data *bfqd = q->elevator->elevator_data;
struct request *free = NULL;
/*
diff --git a/block/blk-mq-sched.c b/block/blk-mq-sched.c
index 7620734d5542..f422c7feea7e 100644
--- a/block/blk-mq-sched.c
+++ b/block/blk-mq-sched.c
@@ -334,14 +334,16 @@ bool __blk_mq_sched_bio_merge(struct request_queue *q, struct bio *bio,
unsigned int nr_segs)
{
struct elevator_queue *e = q->elevator;
- struct blk_mq_ctx *ctx = blk_mq_get_ctx(q);
- struct blk_mq_hw_ctx *hctx = blk_mq_map_queue(q, bio->bi_opf, ctx);
+ struct blk_mq_ctx *ctx;
+ struct blk_mq_hw_ctx *hctx;
bool ret = false;
enum hctx_type type;
if (e && e->type->ops.bio_merge)
- return e->type->ops.bio_merge(hctx, bio, nr_segs);
+ return e->type->ops.bio_merge(q, bio, nr_segs);
+ ctx = blk_mq_get_ctx(q);
+ hctx = blk_mq_map_queue(q, bio->bi_opf, ctx);
type = hctx->type;
if ((hctx->flags & BLK_MQ_F_SHOULD_MERGE) &&
!list_empty_careful(&ctx->rq_lists[type])) {
diff --git a/block/kyber-iosched.c b/block/kyber-iosched.c
index 34dcea0ef637..77a0fcebdc77 100644
--- a/block/kyber-iosched.c
+++ b/block/kyber-iosched.c
@@ -562,11 +562,12 @@ static void kyber_limit_depth(unsigned int op, struct blk_mq_alloc_data *data)
}
}
-static bool kyber_bio_merge(struct blk_mq_hw_ctx *hctx, struct bio *bio,
+static bool kyber_bio_merge(struct request_queue *q, struct bio *bio,
unsigned int nr_segs)
{
+ struct blk_mq_ctx *ctx = blk_mq_get_ctx(q);
+ struct blk_mq_hw_ctx *hctx = blk_mq_map_queue(q, bio->bi_opf, ctx);
struct kyber_hctx_data *khd = hctx->sched_data;
- struct blk_mq_ctx *ctx = blk_mq_get_ctx(hctx->queue);
struct kyber_ctx_queue *kcq = &khd->kcqs[ctx->index_hw[hctx->type]];
unsigned int sched_domain = kyber_sched_domain(bio->bi_opf);
struct list_head *rq_list = &kcq->rq_list[sched_domain];
diff --git a/block/mq-deadline.c b/block/mq-deadline.c
index b490f47fd553..19c6922e85f1 100644
--- a/block/mq-deadline.c
+++ b/block/mq-deadline.c
@@ -459,10 +459,9 @@ static int dd_request_merge(struct request_queue *q, struct request **rq,
return ELEVATOR_NO_MERGE;
}
-static bool dd_bio_merge(struct blk_mq_hw_ctx *hctx, struct bio *bio,
+static bool dd_bio_merge(struct request_queue *q, struct bio *bio,
unsigned int nr_segs)
{
- struct request_queue *q = hctx->queue;
struct deadline_data *dd = q->elevator->elevator_data;
struct request *free = NULL;
bool ret;
diff --git a/include/linux/elevator.h b/include/linux/elevator.h
index 901bda352dcb..7b4d5face204 100644
--- a/include/linux/elevator.h
+++ b/include/linux/elevator.h
@@ -34,7 +34,7 @@ struct elevator_mq_ops {
void (*depth_updated)(struct blk_mq_hw_ctx *);
bool (*allow_merge)(struct request_queue *, struct request *, struct bio *);
- bool (*bio_merge)(struct blk_mq_hw_ctx *, struct bio *, unsigned int);
+ bool (*bio_merge)(struct request_queue *, struct bio *, unsigned int);
int (*request_merge)(struct request_queue *q, struct request **, struct bio *);
void (*request_merged)(struct request_queue *, struct request *, enum elv_merge);
void (*requests_merged)(struct request_queue *, struct request *, struct request *);
--
2.30.2
From: Christoph Hellwig <[email protected]>
commit 1cea335d1db1ce6ab71b3d2f94a807112b738a0f upstream.
bio completions can race when a page spans more than one file system
block. Add a spinlock to synchronize marking the page uptodate.
Fixes: 9dc55f1389f9 ("iomap: add support for sub-pagesize buffered I/O without buffer heads")
Reported-by: Jan Stancek <[email protected]>
Signed-off-by: Christoph Hellwig <[email protected]>
Reviewed-by: Dave Chinner <[email protected]>
Reviewed-by: Darrick J. Wong <[email protected]>
Signed-off-by: Darrick J. Wong <[email protected]>
Cc: "Matthew Wilcox (Oracle)" <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/iomap/buffered-io.c | 34 ++++++++++++++++++++++++----------
include/linux/iomap.h | 1 +
2 files changed, 25 insertions(+), 10 deletions(-)
--- a/fs/iomap/buffered-io.c
+++ b/fs/iomap/buffered-io.c
@@ -30,6 +30,7 @@ iomap_page_create(struct inode *inode, s
iop = kmalloc(sizeof(*iop), GFP_NOFS | __GFP_NOFAIL);
atomic_set(&iop->read_count, 0);
atomic_set(&iop->write_count, 0);
+ spin_lock_init(&iop->uptodate_lock);
bitmap_zero(iop->uptodate, PAGE_SIZE / SECTOR_SIZE);
/*
@@ -118,25 +119,38 @@ iomap_adjust_read_range(struct inode *in
}
static void
-iomap_set_range_uptodate(struct page *page, unsigned off, unsigned len)
+iomap_iop_set_range_uptodate(struct page *page, unsigned off, unsigned len)
{
struct iomap_page *iop = to_iomap_page(page);
struct inode *inode = page->mapping->host;
unsigned first = off >> inode->i_blkbits;
unsigned last = (off + len - 1) >> inode->i_blkbits;
- unsigned int i;
bool uptodate = true;
+ unsigned long flags;
+ unsigned int i;
- if (iop) {
- for (i = 0; i < PAGE_SIZE / i_blocksize(inode); i++) {
- if (i >= first && i <= last)
- set_bit(i, iop->uptodate);
- else if (!test_bit(i, iop->uptodate))
- uptodate = false;
- }
+ spin_lock_irqsave(&iop->uptodate_lock, flags);
+ for (i = 0; i < PAGE_SIZE / i_blocksize(inode); i++) {
+ if (i >= first && i <= last)
+ set_bit(i, iop->uptodate);
+ else if (!test_bit(i, iop->uptodate))
+ uptodate = false;
}
- if (uptodate && !PageError(page))
+ if (uptodate)
+ SetPageUptodate(page);
+ spin_unlock_irqrestore(&iop->uptodate_lock, flags);
+}
+
+static void
+iomap_set_range_uptodate(struct page *page, unsigned off, unsigned len)
+{
+ if (PageError(page))
+ return;
+
+ if (page_has_private(page))
+ iomap_iop_set_range_uptodate(page, off, len);
+ else
SetPageUptodate(page);
}
--- a/include/linux/iomap.h
+++ b/include/linux/iomap.h
@@ -139,6 +139,7 @@ loff_t iomap_apply(struct inode *inode,
struct iomap_page {
atomic_t read_count;
atomic_t write_count;
+ spinlock_t uptodate_lock;
DECLARE_BITMAP(uptodate, PAGE_SIZE / 512);
};
From: Ferry Toth <[email protected]>
commit 04357fafea9c7ed34525eb9680c760245c3bb958 upstream.
On Intel Merrifield LPM is causing host to reset port after a timeout.
By disabling LPM entirely this is prevented.
Fixes: 066c09593454 ("usb: dwc3: pci: Enable extcon driver for Intel Merrifield")
Reviewed-by: Andy Shevchenko <[email protected]>
Signed-off-by: Ferry Toth <[email protected]>
Cc: stable <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/dwc3/dwc3-pci.c | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/usb/dwc3/dwc3-pci.c
+++ b/drivers/usb/dwc3/dwc3-pci.c
@@ -138,6 +138,7 @@ static const struct property_entry dwc3_
PROPERTY_ENTRY_BOOL("snps,disable_scramble_quirk"),
PROPERTY_ENTRY_BOOL("snps,dis_u3_susphy_quirk"),
PROPERTY_ENTRY_BOOL("snps,dis_u2_susphy_quirk"),
+ PROPERTY_ENTRY_BOOL("snps,usb2-gadget-lpm-disable"),
PROPERTY_ENTRY_BOOL("linux,sysdev_is_parent"),
{}
};
From: Marcel Hamer <[email protected]>
commit e17b02d4970913233d543c79c9c66e72cac05bdd upstream.
When extcon is used in combination with dwc3, it is assumed that the dwc3
registers are untouched and as such are only configured if VBUS is valid
or ID is tied to ground.
In case VBUS is not valid or ID is floating, the registers are not
configured as such during driver initialization, causing a wrong
default state during boot.
If the registers are not in a default state, because they are for
instance touched by a boot loader, this can cause for a kernel error.
Signed-off-by: Marcel Hamer <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Cc: stable <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/dwc3/dwc3-omap.c | 5 +++++
1 file changed, 5 insertions(+)
--- a/drivers/usb/dwc3/dwc3-omap.c
+++ b/drivers/usb/dwc3/dwc3-omap.c
@@ -437,8 +437,13 @@ static int dwc3_omap_extcon_register(str
if (extcon_get_state(edev, EXTCON_USB) == true)
dwc3_omap_set_mailbox(omap, OMAP_DWC3_VBUS_VALID);
+ else
+ dwc3_omap_set_mailbox(omap, OMAP_DWC3_VBUS_OFF);
+
if (extcon_get_state(edev, EXTCON_USB_HOST) == true)
dwc3_omap_set_mailbox(omap, OMAP_DWC3_ID_GROUND);
+ else
+ dwc3_omap_set_mailbox(omap, OMAP_DWC3_ID_FLOAT);
omap->edev = edev;
}
From: Wesley Cheng <[email protected]>
commit 18ffa988dbae69cc6e9949cddd9606f6fe533894 upstream.
If an error is received when issuing a start or update transfer
command, the error handler will stop all active requests (including
the current USB request), and call dwc3_gadget_giveback() to notify
function drivers of the requests which have been stopped. Avoid
returning an error for kick transfer during EP queue, to remove
duplicate cleanup operations on the request being queued.
Fixes: 8d99087c2db8 ("usb: dwc3: gadget: Properly handle failed kick_transfer")
cc: [email protected]
Signed-off-by: Wesley Cheng <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/dwc3/gadget.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -1566,7 +1566,9 @@ static int __dwc3_gadget_ep_queue(struct
}
}
- return __dwc3_gadget_kick_transfer(dep);
+ __dwc3_gadget_kick_transfer(dep);
+
+ return 0;
}
static int dwc3_gadget_ep_queue(struct usb_ep *ep, struct usb_request *request,
From: Mateusz Palczewski <[email protected]>
[ Upstream commit 15395ec4685bd45a43d1b54b8fd9846b87e2c621 ]
Unlike other supported adapters, 2.5G and 5G use different
PHY type identifiers for reading/writing PHY settings
and for reading link status. This commit introduces
separate PHY identifiers for these two operation types.
Fixes: 2e45d3f4677a ("i40e: Add support for X710 B/P & SFP+ cards")
Signed-off-by: Dawid Lukwinski <[email protected]>
Signed-off-by: Mateusz Palczewski <[email protected]>
Reviewed-by: Aleksandr Loktionov <[email protected]>
Tested-by: Dave Switzer <[email protected]>
Signed-off-by: Tony Nguyen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/intel/i40e/i40e_adminq_cmd.h | 6 ++++--
drivers/net/ethernet/intel/i40e/i40e_common.c | 4 ++--
drivers/net/ethernet/intel/i40e/i40e_ethtool.c | 4 ++--
drivers/net/ethernet/intel/i40e/i40e_type.h | 7 ++-----
4 files changed, 10 insertions(+), 11 deletions(-)
diff --git a/drivers/net/ethernet/intel/i40e/i40e_adminq_cmd.h b/drivers/net/ethernet/intel/i40e/i40e_adminq_cmd.h
index d7684ac2522e..57a8328e9b4f 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_adminq_cmd.h
+++ b/drivers/net/ethernet/intel/i40e/i40e_adminq_cmd.h
@@ -1893,8 +1893,10 @@ enum i40e_aq_phy_type {
I40E_PHY_TYPE_25GBASE_LR = 0x22,
I40E_PHY_TYPE_25GBASE_AOC = 0x23,
I40E_PHY_TYPE_25GBASE_ACC = 0x24,
- I40E_PHY_TYPE_2_5GBASE_T = 0x30,
- I40E_PHY_TYPE_5GBASE_T = 0x31,
+ I40E_PHY_TYPE_2_5GBASE_T = 0x26,
+ I40E_PHY_TYPE_5GBASE_T = 0x27,
+ I40E_PHY_TYPE_2_5GBASE_T_LINK_STATUS = 0x30,
+ I40E_PHY_TYPE_5GBASE_T_LINK_STATUS = 0x31,
I40E_PHY_TYPE_MAX,
I40E_PHY_TYPE_NOT_SUPPORTED_HIGH_TEMP = 0xFD,
I40E_PHY_TYPE_EMPTY = 0xFE,
diff --git a/drivers/net/ethernet/intel/i40e/i40e_common.c b/drivers/net/ethernet/intel/i40e/i40e_common.c
index 66f7deaf46ae..6475f78e85f6 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_common.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_common.c
@@ -1156,8 +1156,8 @@ static enum i40e_media_type i40e_get_media_type(struct i40e_hw *hw)
break;
case I40E_PHY_TYPE_100BASE_TX:
case I40E_PHY_TYPE_1000BASE_T:
- case I40E_PHY_TYPE_2_5GBASE_T:
- case I40E_PHY_TYPE_5GBASE_T:
+ case I40E_PHY_TYPE_2_5GBASE_T_LINK_STATUS:
+ case I40E_PHY_TYPE_5GBASE_T_LINK_STATUS:
case I40E_PHY_TYPE_10GBASE_T:
media = I40E_MEDIA_TYPE_BASET;
break;
diff --git a/drivers/net/ethernet/intel/i40e/i40e_ethtool.c b/drivers/net/ethernet/intel/i40e/i40e_ethtool.c
index 502b4abc0aab..e4d0b7747e84 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_ethtool.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_ethtool.c
@@ -839,8 +839,8 @@ static void i40e_get_settings_link_up(struct i40e_hw *hw,
10000baseT_Full);
break;
case I40E_PHY_TYPE_10GBASE_T:
- case I40E_PHY_TYPE_5GBASE_T:
- case I40E_PHY_TYPE_2_5GBASE_T:
+ case I40E_PHY_TYPE_5GBASE_T_LINK_STATUS:
+ case I40E_PHY_TYPE_2_5GBASE_T_LINK_STATUS:
case I40E_PHY_TYPE_1000BASE_T:
case I40E_PHY_TYPE_100BASE_TX:
ethtool_link_ksettings_add_link_mode(ks, supported, Autoneg);
diff --git a/drivers/net/ethernet/intel/i40e/i40e_type.h b/drivers/net/ethernet/intel/i40e/i40e_type.h
index b43ec94a0f29..666a251e8c72 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_type.h
+++ b/drivers/net/ethernet/intel/i40e/i40e_type.h
@@ -253,11 +253,8 @@ struct i40e_phy_info {
#define I40E_CAP_PHY_TYPE_25GBASE_ACC BIT_ULL(I40E_PHY_TYPE_25GBASE_ACC + \
I40E_PHY_TYPE_OFFSET)
/* Offset for 2.5G/5G PHY Types value to bit number conversion */
-#define I40E_PHY_TYPE_OFFSET2 (-10)
-#define I40E_CAP_PHY_TYPE_2_5GBASE_T BIT_ULL(I40E_PHY_TYPE_2_5GBASE_T + \
- I40E_PHY_TYPE_OFFSET2)
-#define I40E_CAP_PHY_TYPE_5GBASE_T BIT_ULL(I40E_PHY_TYPE_5GBASE_T + \
- I40E_PHY_TYPE_OFFSET2)
+#define I40E_CAP_PHY_TYPE_2_5GBASE_T BIT_ULL(I40E_PHY_TYPE_2_5GBASE_T)
+#define I40E_CAP_PHY_TYPE_5GBASE_T BIT_ULL(I40E_PHY_TYPE_5GBASE_T)
#define I40E_HW_CAP_MAX_GPIO 30
/* Capabilities of a PF or a VF or the whole device */
struct i40e_hw_capabilities {
--
2.30.2
From: Dmitry Osipenko <[email protected]>
commit f73c730774d88a14d7b60feee6d0e13570f99499 upstream.
The raw temperature value is a 16-bit signed integer. The sign casting
is missing in the code, which results in a wrong temperature reported
by userspace tools, fix it.
Cc: [email protected]
Fixes: 3904b28efb2c ("iio: gyro: Add driver for the MPU-3050 gyroscope")
Datasheet: https://www.cdiweb.com/datasheets/invensense/mpu-3000a.pdf
Tested-by: Maxim Schwalm <[email protected]> # Asus TF700T
Tested-by: Svyatoslav Ryhel <[email protected]> # Asus TF201
Reported-by: Svyatoslav Ryhel <[email protected]>
Reviewed-by: Andy Shevchenko <[email protected]>
Reviewed-by: Linus Walleij <[email protected]>
Signed-off-by: Dmitry Osipenko <[email protected]>
Acked-by: Jean-Baptiste Maneyrol <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jonathan Cameron <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/iio/gyro/mpu3050-core.c | 13 +++++++++++--
1 file changed, 11 insertions(+), 2 deletions(-)
--- a/drivers/iio/gyro/mpu3050-core.c
+++ b/drivers/iio/gyro/mpu3050-core.c
@@ -271,7 +271,16 @@ static int mpu3050_read_raw(struct iio_d
case IIO_CHAN_INFO_OFFSET:
switch (chan->type) {
case IIO_TEMP:
- /* The temperature scaling is (x+23000)/280 Celsius */
+ /*
+ * The temperature scaling is (x+23000)/280 Celsius
+ * for the "best fit straight line" temperature range
+ * of -30C..85C. The 23000 includes room temperature
+ * offset of +35C, 280 is the precision scale and x is
+ * the 16-bit signed integer reported by hardware.
+ *
+ * Temperature value itself represents temperature of
+ * the sensor die.
+ */
*val = 23000;
return IIO_VAL_INT;
default:
@@ -328,7 +337,7 @@ static int mpu3050_read_raw(struct iio_d
goto out_read_raw_unlock;
}
- *val = be16_to_cpu(raw_val);
+ *val = (s16)be16_to_cpu(raw_val);
ret = IIO_VAL_INT;
goto out_read_raw_unlock;
From: Sandeep Singh <[email protected]>
commit 3c128781d8da463761495aaf8898c9ecb4e71528 upstream.
One of AMD xhci controller require reset on resume.
Occasionally AMD xhci controller does not respond to
Stop endpoint command.
Once the issue happens controller goes into bad state
and in that case controller needs to be reset.
Cc: <[email protected]>
Signed-off-by: Sandeep Singh <[email protected]>
Signed-off-by: Mathias Nyman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/host/xhci-pci.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
--- a/drivers/usb/host/xhci-pci.c
+++ b/drivers/usb/host/xhci-pci.c
@@ -153,8 +153,10 @@ static void xhci_pci_quirks(struct devic
(pdev->device == 0x15e0 || pdev->device == 0x15e1))
xhci->quirks |= XHCI_SNPS_BROKEN_SUSPEND;
- if (pdev->vendor == PCI_VENDOR_ID_AMD && pdev->device == 0x15e5)
+ if (pdev->vendor == PCI_VENDOR_ID_AMD && pdev->device == 0x15e5) {
xhci->quirks |= XHCI_DISABLE_SPARSE;
+ xhci->quirks |= XHCI_RESET_ON_RESUME;
+ }
if (pdev->vendor == PCI_VENDOR_ID_AMD)
xhci->quirks |= XHCI_TRUST_TX_LENGTH;
From: Oliver Neukum <[email protected]>
commit 18abf874367456540846319574864e6ff32752e2 upstream.
We have a cycle of callbacks scheduling works which submit
URBs with those callbacks. This needs to be blocked, stopped
and unblocked to untangle the circle.
Signed-off-by: Oliver Neukum <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Cc: stable <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/class/cdc-wdm.c | 30 ++++++++++++++++++++++--------
1 file changed, 22 insertions(+), 8 deletions(-)
--- a/drivers/usb/class/cdc-wdm.c
+++ b/drivers/usb/class/cdc-wdm.c
@@ -321,12 +321,23 @@ exit:
}
-static void kill_urbs(struct wdm_device *desc)
+static void poison_urbs(struct wdm_device *desc)
{
/* the order here is essential */
- usb_kill_urb(desc->command);
- usb_kill_urb(desc->validity);
- usb_kill_urb(desc->response);
+ usb_poison_urb(desc->command);
+ usb_poison_urb(desc->validity);
+ usb_poison_urb(desc->response);
+}
+
+static void unpoison_urbs(struct wdm_device *desc)
+{
+ /*
+ * the order here is not essential
+ * it is symmetrical just to be nice
+ */
+ usb_unpoison_urb(desc->response);
+ usb_unpoison_urb(desc->validity);
+ usb_unpoison_urb(desc->command);
}
static void free_urbs(struct wdm_device *desc)
@@ -741,11 +752,12 @@ static int wdm_release(struct inode *ino
if (!desc->count) {
if (!test_bit(WDM_DISCONNECTING, &desc->flags)) {
dev_dbg(&desc->intf->dev, "wdm_release: cleanup\n");
- kill_urbs(desc);
+ poison_urbs(desc);
spin_lock_irq(&desc->iuspin);
desc->resp_count = 0;
spin_unlock_irq(&desc->iuspin);
desc->manage_power(desc->intf, 0);
+ unpoison_urbs(desc);
} else {
/* must avoid dev_printk here as desc->intf is invalid */
pr_debug(KBUILD_MODNAME " %s: device gone - cleaning up\n", __func__);
@@ -1036,9 +1048,9 @@ static void wdm_disconnect(struct usb_in
wake_up_all(&desc->wait);
mutex_lock(&desc->rlock);
mutex_lock(&desc->wlock);
+ poison_urbs(desc);
cancel_work_sync(&desc->rxwork);
cancel_work_sync(&desc->service_outs_intr);
- kill_urbs(desc);
mutex_unlock(&desc->wlock);
mutex_unlock(&desc->rlock);
@@ -1079,9 +1091,10 @@ static int wdm_suspend(struct usb_interf
set_bit(WDM_SUSPENDING, &desc->flags);
spin_unlock_irq(&desc->iuspin);
/* callback submits work - order is essential */
- kill_urbs(desc);
+ poison_urbs(desc);
cancel_work_sync(&desc->rxwork);
cancel_work_sync(&desc->service_outs_intr);
+ unpoison_urbs(desc);
}
if (!PMSG_IS_AUTO(message)) {
mutex_unlock(&desc->wlock);
@@ -1139,7 +1152,7 @@ static int wdm_pre_reset(struct usb_inte
wake_up_all(&desc->wait);
mutex_lock(&desc->rlock);
mutex_lock(&desc->wlock);
- kill_urbs(desc);
+ poison_urbs(desc);
cancel_work_sync(&desc->rxwork);
cancel_work_sync(&desc->service_outs_intr);
return 0;
@@ -1150,6 +1163,7 @@ static int wdm_post_reset(struct usb_int
struct wdm_device *desc = wdm_find_device(intf);
int rv;
+ unpoison_urbs(desc);
clear_bit(WDM_OVERFLOW, &desc->flags);
clear_bit(WDM_RESETTING, &desc->flags);
rv = recover_from_urb_loss(desc);
From: Colin Ian King <[email protected]>
commit af0e1871d79cfbb91f732d2c6fa7558e45c31038 upstream.
The lux_val returned from tsl2583_get_lux can potentially be zero,
so check for this to avoid a division by zero and an overflowed
gain_trim_val.
Fixes clang scan-build warning:
drivers/iio/light/tsl2583.c:345:40: warning: Either the
condition 'lux_val<0' is redundant or there is division
by zero at line 345. [zerodivcond]
Fixes: ac4f6eee8fe8 ("staging: iio: TAOS tsl258x: Device driver")
Signed-off-by: Colin Ian King <[email protected]>
Cc: <[email protected]>
Signed-off-by: Jonathan Cameron <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/iio/light/tsl2583.c | 8 ++++++++
1 file changed, 8 insertions(+)
--- a/drivers/iio/light/tsl2583.c
+++ b/drivers/iio/light/tsl2583.c
@@ -341,6 +341,14 @@ static int tsl2583_als_calibrate(struct
return lux_val;
}
+ /* Avoid division by zero of lux_value later on */
+ if (lux_val == 0) {
+ dev_err(&chip->client->dev,
+ "%s: lux_val of 0 will produce out of range trim_value\n",
+ __func__);
+ return -ENODATA;
+ }
+
gain_trim_val = (unsigned int)(((chip->als_settings.als_cal_target)
* chip->als_settings.als_gain_trim) / lux_val);
if ((gain_trim_val < 250) || (gain_trim_val > 4000)) {
From: Matthew Wilcox (Oracle) <[email protected]>
commit 9ddb3c14afba8bc5950ed297f02d4ae05ff35cd1 upstream.
32-bit architectures which expect 8-byte alignment for 8-byte integers and
need 64-bit DMA addresses (arm, mips, ppc) had their struct page
inadvertently expanded in 2019. When the dma_addr_t was added, it forced
the alignment of the union to 8 bytes, which inserted a 4 byte gap between
'flags' and the union.
Fix this by storing the dma_addr_t in one or two adjacent unsigned longs.
This restores the alignment to that of an unsigned long. We always
store the low bits in the first word to prevent the PageTail bit from
being inadvertently set on a big endian platform. If that happened,
get_user_pages_fast() racing against a page which was freed and
reallocated to the page_pool could dereference a bogus compound_head(),
which would be hard to trace back to this cause.
Link: https://lkml.kernel.org/r/[email protected]
Fixes: c25fff7171be ("mm: add dma_addr_t to struct page")
Signed-off-by: Matthew Wilcox (Oracle) <[email protected]>
Acked-by: Ilias Apalodimas <[email protected]>
Acked-by: Jesper Dangaard Brouer <[email protected]>
Acked-by: Vlastimil Babka <[email protected]>
Tested-by: Matteo Croce <[email protected]>
Cc: <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
include/linux/mm_types.h | 4 ++--
include/net/page_pool.h | 12 +++++++++++-
net/core/page_pool.c | 6 +++---
3 files changed, 16 insertions(+), 6 deletions(-)
--- a/include/linux/mm_types.h
+++ b/include/linux/mm_types.h
@@ -95,10 +95,10 @@ struct page {
};
struct { /* page_pool used by netstack */
/**
- * @dma_addr: might require a 64-bit value even on
+ * @dma_addr: might require a 64-bit value on
* 32-bit architectures.
*/
- dma_addr_t dma_addr;
+ unsigned long dma_addr[2];
};
struct { /* slab, slob and slub */
union {
--- a/include/net/page_pool.h
+++ b/include/net/page_pool.h
@@ -185,7 +185,17 @@ static inline void page_pool_release_pag
static inline dma_addr_t page_pool_get_dma_addr(struct page *page)
{
- return page->dma_addr;
+ dma_addr_t ret = page->dma_addr[0];
+ if (sizeof(dma_addr_t) > sizeof(unsigned long))
+ ret |= (dma_addr_t)page->dma_addr[1] << 16 << 16;
+ return ret;
+}
+
+static inline void page_pool_set_dma_addr(struct page *page, dma_addr_t addr)
+{
+ page->dma_addr[0] = addr;
+ if (sizeof(dma_addr_t) > sizeof(unsigned long))
+ page->dma_addr[1] = upper_32_bits(addr);
}
static inline bool is_page_pool_compiled_in(void)
--- a/net/core/page_pool.c
+++ b/net/core/page_pool.c
@@ -157,7 +157,7 @@ static struct page *__page_pool_alloc_pa
put_page(page);
return NULL;
}
- page->dma_addr = dma;
+ page_pool_set_dma_addr(page, dma);
skip_dma_map:
/* Track how many pages are held 'in-flight' */
@@ -216,12 +216,12 @@ static void __page_pool_clean_page(struc
if (!(pool->p.flags & PP_FLAG_DMA_MAP))
goto skip_dma_unmap;
- dma = page->dma_addr;
+ dma = page_pool_get_dma_addr(page);
/* DMA unmap */
dma_unmap_page_attrs(pool->p.dev, dma,
PAGE_SIZE << pool->p.order, pool->p.dma_dir,
DMA_ATTR_SKIP_CPU_SYNC);
- page->dma_addr = 0;
+ page_pool_set_dma_addr(page, 0);
skip_dma_unmap:
/* This may be the last page returned, releasing the pool, so
* it is not safe to reference pool afterwards.
From: Thomas Gleixner <[email protected]>
commit 594b27e677b35f9734b1969d175ebc6146741109 upstream.
Nothing prevents the following:
pvclock_gtod_notify()
queue_work(system_long_wq, &pvclock_gtod_work);
...
remove_module(kvm);
...
work_queue_run()
pvclock_gtod_work() <- UAF
Ditto for any other operation on that workqueue list head which touches
pvclock_gtod_work after module removal.
Cancel the work in kvm_arch_exit() to prevent that.
Fixes: 16e8d74d2da9 ("KVM: x86: notifier for clocksource changes")
Signed-off-by: Thomas Gleixner <[email protected]>
Message-Id: <[email protected]>
Cc: [email protected]
Signed-off-by: Paolo Bonzini <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/kvm/x86.c | 1 +
1 file changed, 1 insertion(+)
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -7356,6 +7356,7 @@ void kvm_arch_exit(void)
cpuhp_remove_state_nocalls(CPUHP_AP_X86_KVM_CLK_ONLINE);
#ifdef CONFIG_X86_64
pvclock_gtod_unregister_notifier(&pvclock_gtod_notifier);
+ cancel_work_sync(&pvclock_gtod_work);
#endif
kvm_x86_ops = NULL;
kvm_mmu_module_exit();
From: Maximilian Luz <[email protected]>
commit ca09b1bea63ab83f4cca3a2ae8bc4f597ec28851 upstream.
On some devices (specifically the SC8180x based Surface Pro X with
QCOM04A6) HC halt / xhci_halt() times out during boot. Manually binding
the xhci-hcd driver at some point later does not exhibit this behavior.
To work around this, double XHCI_MAX_HALT_USEC, which also resolves this
issue.
Cc: <[email protected]>
Signed-off-by: Maximilian Luz <[email protected]>
Signed-off-by: Mathias Nyman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/host/xhci-ext-caps.h | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
--- a/drivers/usb/host/xhci-ext-caps.h
+++ b/drivers/usb/host/xhci-ext-caps.h
@@ -7,8 +7,9 @@
* Author: Sarah Sharp
* Some code borrowed from the Linux EHCI driver.
*/
-/* Up to 16 ms to halt an HC */
-#define XHCI_MAX_HALT_USEC (16*1000)
+
+/* HC should halt within 16 ms, but use 32 ms as some hosts take longer */
+#define XHCI_MAX_HALT_USEC (32 * 1000)
/* HC not running - set to 1 when run/stop bit is cleared. */
#define XHCI_STS_HALT (1<<0)
From: Maciej W. Rozycki <[email protected]>
commit 193ced4a79599352d63cb8c9e2f0c6043106eb6a upstream.
Recent versions of the PCI Express specification have deprecated support
for I/O transactions and actually some PCIe host bridges, such as Power
Systems Host Bridge 4 (PHB4), do not implement them.
The default kernel configuration choice for the defxx driver is the use
of I/O ports rather than MMIO for PCI and EISA systems. It may have
made sense as a conservative backwards compatible choice back when MMIO
operation support was added to the driver as a part of TURBOchannel bus
support. However nowadays this configuration choice makes the driver
unusable with systems that do not implement I/O transactions for PCIe.
Make DEFXX_MMIO the configuration default then, except where configured
for EISA. This exception is because an EISA adapter can have its MMIO
decoding disabled with ECU (EISA Configuration Utility) and therefore
not available with the resource allocation infrastructure we implement,
while port I/O is always readily available as it uses slot-specific
addressing, directly mapped to the slot an option card has been placed
in and handled with our EISA bus support core. Conversely a kernel that
supports modern systems which may not have I/O transactions implemented
for PCIe will usually not be expected to handle legacy EISA systems.
The change of the default will make it easier for people, including but
not limited to distribution packagers, to make a working choice for the
driver.
Update the option description accordingly and while at it replace the
potentially ambiguous PIO acronym with IOP for "port I/O" vs "I/O ports"
according to our nomenclature used elsewhere.
Signed-off-by: Maciej W. Rozycki <[email protected]>
Fixes: e89a2cfb7d7b ("[TC] defxx: TURBOchannel support")
Cc: [email protected] # v2.6.21+
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/fddi/Kconfig | 15 +++++++++------
1 file changed, 9 insertions(+), 6 deletions(-)
--- a/drivers/net/fddi/Kconfig
+++ b/drivers/net/fddi/Kconfig
@@ -40,17 +40,20 @@ config DEFXX
config DEFXX_MMIO
bool
- prompt "Use MMIO instead of PIO" if PCI || EISA
+ prompt "Use MMIO instead of IOP" if PCI || EISA
depends on DEFXX
- default n if PCI || EISA
+ default n if EISA
default y
---help---
This instructs the driver to use EISA or PCI memory-mapped I/O
- (MMIO) as appropriate instead of programmed I/O ports (PIO).
+ (MMIO) as appropriate instead of programmed I/O ports (IOP).
Enabling this gives an improvement in processing time in parts
- of the driver, but it may cause problems with EISA (DEFEA)
- adapters. TURBOchannel does not have the concept of I/O ports,
- so MMIO is always used for these (DEFTA) adapters.
+ of the driver, but it requires a memory window to be configured
+ for EISA (DEFEA) adapters that may not always be available.
+ Conversely some PCIe host bridges do not support IOP, so MMIO
+ may be required to access PCI (DEFPA) adapters on downstream PCI
+ buses with some systems. TURBOchannel does not have the concept
+ of I/O ports, so MMIO is always used for these (DEFTA) adapters.
If unsure, say N.
From: Maciej W. Rozycki <[email protected]>
commit c49f71f60754acbff37505e1d16ca796bf8a8140 upstream.
Our current MIPS platform `__div64_32' handler is inactive, because it
is incorrectly only enabled for 64-bit configurations, for which generic
`do_div' code does not call it anyway.
The handler is not suitable for being called from there though as it
only calculates 32 bits of the quotient under the assumption the 64-bit
divident has been suitably reduced. Code for such reduction used to be
there, however it has been incorrectly removed with commit c21004cd5b4c
("MIPS: Rewrite <asm/div64.h> to work with gcc 4.4.0."), which should
have only updated an obsoleted constraint for an inline asm involving
$hi and $lo register outputs, while possibly wiring the original MIPS
variant of the `do_div' macro as `__div64_32' handler for the generic
`do_div' implementation
Correct the handler as follows then:
- Revert most of the commit referred, however retaining the current
formatting, except for the final two instructions of the inline asm
sequence, which the original commit missed. Omit the original 64-bit
parts though.
- Rename the original `do_div' macro to `__div64_32'. Use the combined
`x' constraint referring to the MD accumulator as a whole, replacing
the original individual `h' and `l' constraints used for $hi and $lo
registers respectively, of which `h' has been obsoleted with GCC 4.4.
Update surrounding code accordingly.
We have since removed support for GCC versions before 4.9, so no need
for a special arrangement here; GCC has supported the `x' constraint
since forever anyway, or at least going back to 1991.
- Rename the `__base' local variable in `__div64_32' to `__radix' to
avoid a conflict with a local variable in `do_div'.
- Actually enable this code for 32-bit rather than 64-bit configurations
by qualifying it with BITS_PER_LONG being 32 instead of 64. Include
<asm/bitsperlong.h> for this macro rather than <linux/types.h> as we
don't need anything else.
- Finally include <asm-generic/div64.h> last rather than first.
This has passed correctness verification with test_div64 and reduced the
module's average execution time down to 1.0668s and 0.2629s from 2.1529s
and 0.5647s respectively for an R3400 CPU @40MHz and a 5Kc CPU @160MHz.
For a reference 64-bit `do_div' code where we have the DDIVU instruction
available to do the whole calculation right away averages at 0.0660s for
the latter CPU.
Fixes: c21004cd5b4c ("MIPS: Rewrite <asm/div64.h> to work with gcc 4.4.0.")
Reported-by: Huacai Chen <[email protected]>
Signed-off-by: Maciej W. Rozycki <[email protected]>
Cc: [email protected] # v2.6.30+
Signed-off-by: Thomas Bogendoerfer <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/mips/include/asm/div64.h | 57 ++++++++++++++++++++++++++++++------------
1 file changed, 41 insertions(+), 16 deletions(-)
--- a/arch/mips/include/asm/div64.h
+++ b/arch/mips/include/asm/div64.h
@@ -1,5 +1,5 @@
/*
- * Copyright (C) 2000, 2004 Maciej W. Rozycki
+ * Copyright (C) 2000, 2004, 2021 Maciej W. Rozycki
* Copyright (C) 2003, 07 Ralf Baechle ([email protected])
*
* This file is subject to the terms and conditions of the GNU General Public
@@ -9,25 +9,18 @@
#ifndef __ASM_DIV64_H
#define __ASM_DIV64_H
-#include <asm-generic/div64.h>
-
-#if BITS_PER_LONG == 64
+#include <asm/bitsperlong.h>
-#include <linux/types.h>
+#if BITS_PER_LONG == 32
/*
* No traps on overflows for any of these...
*/
-#define __div64_32(n, base) \
-({ \
+#define do_div64_32(res, high, low, base) ({ \
unsigned long __cf, __tmp, __tmp2, __i; \
unsigned long __quot32, __mod32; \
- unsigned long __high, __low; \
- unsigned long long __n; \
\
- __high = *__n >> 32; \
- __low = __n; \
__asm__( \
" .set push \n" \
" .set noat \n" \
@@ -51,18 +44,50 @@
" subu %0, %0, %z6 \n" \
" addiu %2, %2, 1 \n" \
"3: \n" \
- " bnez %4, 0b\n\t" \
- " srl %5, %1, 0x1f\n\t" \
+ " bnez %4, 0b \n" \
+ " srl %5, %1, 0x1f \n" \
" .set pop" \
: "=&r" (__mod32), "=&r" (__tmp), \
"=&r" (__quot32), "=&r" (__cf), \
"=&r" (__i), "=&r" (__tmp2) \
- : "Jr" (base), "0" (__high), "1" (__low)); \
+ : "Jr" (base), "0" (high), "1" (low)); \
\
- (__n) = __quot32; \
+ (res) = __quot32; \
__mod32; \
})
-#endif /* BITS_PER_LONG == 64 */
+#define __div64_32(n, base) ({ \
+ unsigned long __upper, __low, __high, __radix; \
+ unsigned long long __modquot; \
+ unsigned long long __quot; \
+ unsigned long long __div; \
+ unsigned long __mod; \
+ \
+ __div = (*n); \
+ __radix = (base); \
+ \
+ __high = __div >> 32; \
+ __low = __div; \
+ __upper = __high; \
+ \
+ if (__high) { \
+ __asm__("divu $0, %z1, %z2" \
+ : "=x" (__modquot) \
+ : "Jr" (__high), "Jr" (__radix)); \
+ __upper = __modquot >> 32; \
+ __high = __modquot; \
+ } \
+ \
+ __mod = do_div64_32(__low, __upper, __low, __radix); \
+ \
+ __quot = __high; \
+ __quot = __quot << 32 | __low; \
+ (*n) = __quot; \
+ __mod; \
+})
+
+#endif /* BITS_PER_LONG == 32 */
+
+#include <asm-generic/div64.h>
#endif /* __ASM_DIV64_H */
From: Maciej W. Rozycki <[email protected]>
commit c1d337d45ec0a802299688e17d568c4e3a585895 upstream.
We already check the high part of the divident against zero to avoid the
costly DIVU instruction in that case, needed to reduce the high part of
the divident, so we may well check against the divisor instead and set
the high part of the quotient to zero right away. We need to treat the
high part the divident in that case though as the remainder that would
be calculated by the DIVU instruction we avoided.
This has passed correctness verification with test_div64 and reduced the
module's average execution time down to 1.0445s and 0.2619s from 1.0668s
and 0.2629s respectively for an R3400 CPU @40MHz and a 5Kc CPU @160MHz.
Signed-off-by: Maciej W. Rozycki <[email protected]>
Signed-off-by: Thomas Bogendoerfer <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/mips/include/asm/div64.h | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
--- a/arch/mips/include/asm/div64.h
+++ b/arch/mips/include/asm/div64.h
@@ -68,9 +68,11 @@
\
__high = __div >> 32; \
__low = __div; \
- __upper = __high; \
\
- if (__high) { \
+ if (__high < __radix) { \
+ __upper = __high; \
+ __high = 0; \
+ } else { \
__asm__("divu $0, %z1, %z2" \
: "=x" (__modquot) \
: "Jr" (__high), "Jr" (__radix)); \
From: Christophe JAILLET <[email protected]>
commit dda32c00c9a0fa103b5d54ef72c477b7aa993679 upstream.
'xhci_urb_enqueue()' is passed a 'mem_flags' argument, because "URBs may be
submitted in interrupt context" (see comment related to 'usb_submit_urb()'
in 'drivers/usb/core/urb.c')
So this flag should be used in all the calling chain.
Up to now, 'xhci_check_maxpacket()' which is only called from
'xhci_urb_enqueue()', uses GFP_KERNEL.
Be safe and pass the mem_flags to this function as well.
Fixes: ddba5cd0aeff ("xhci: Use command structures when queuing commands on the command ring")
Cc: <[email protected]>
Signed-off-by: Christophe JAILLET <[email protected]>
Signed-off-by: Mathias Nyman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/host/xhci.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -1397,7 +1397,7 @@ static int xhci_configure_endpoint(struc
* we need to issue an evaluate context command and wait on it.
*/
static int xhci_check_maxpacket(struct xhci_hcd *xhci, unsigned int slot_id,
- unsigned int ep_index, struct urb *urb)
+ unsigned int ep_index, struct urb *urb, gfp_t mem_flags)
{
struct xhci_container_ctx *out_ctx;
struct xhci_input_control_ctx *ctrl_ctx;
@@ -1428,7 +1428,7 @@ static int xhci_check_maxpacket(struct x
* changes max packet sizes.
*/
- command = xhci_alloc_command(xhci, true, GFP_KERNEL);
+ command = xhci_alloc_command(xhci, true, mem_flags);
if (!command)
return -ENOMEM;
@@ -1524,7 +1524,7 @@ static int xhci_urb_enqueue(struct usb_h
*/
if (urb->dev->speed == USB_SPEED_FULL) {
ret = xhci_check_maxpacket(xhci, slot_id,
- ep_index, urb);
+ ep_index, urb, mem_flags);
if (ret < 0) {
xhci_urb_free_priv(urb_priv);
urb->hcpriv = NULL;
From: Maciej W. Rozycki <[email protected]>
commit 25ab14cbe9d1b66fda44c71a2db7582a31b6f5cd upstream.
Remove the inline asm with a DIVU instruction from `__div64_32' and use
plain C code for the intended DIVMOD calculation instead. GCC is smart
enough to know that both the quotient and the remainder are calculated
with single DIVU, so with ISAs up to R5 the same instruction is actually
produced with overall similar code.
For R6 compiled code will work, but separate DIVU and MODU instructions
will be produced, which are also interlocked, so scalar implementations
will likely not perform as well as older ISAs with their asynchronous MD
unit. Likely still faster then the generic algorithm though.
This removes a compilation error for R6 however where the original DIVU
instruction is not supported anymore and the MDU accumulator registers
have been removed and consequently GCC complains as to a constraint it
cannot find a register for:
In file included from ./include/linux/math.h:5,
from ./include/linux/kernel.h:13,
from mm/page-writeback.c:15:
./include/linux/math64.h: In function 'div_u64_rem':
./arch/mips/include/asm/div64.h:76:17: error: inconsistent operand constraints in an 'asm'
76 | __asm__("divu $0, %z1, %z2" \
| ^~~~~~~
./include/asm-generic/div64.h:245:25: note: in expansion of macro '__div64_32'
245 | __rem = __div64_32(&(n), __base); \
| ^~~~~~~~~~
./include/linux/math64.h:91:22: note: in expansion of macro 'do_div'
91 | *remainder = do_div(dividend, divisor);
| ^~~~~~
This has passed correctness verification with test_div64 and reduced the
module's average execution time down to 1.0404s from 1.0445s with R3400
@40MHz. The module's MIPS I machine code has also shrunk by 12 bytes or
3 instructions.
Signed-off-by: Maciej W. Rozycki <[email protected]>
Signed-off-by: Thomas Bogendoerfer <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/mips/include/asm/div64.h | 8 ++------
1 file changed, 2 insertions(+), 6 deletions(-)
--- a/arch/mips/include/asm/div64.h
+++ b/arch/mips/include/asm/div64.h
@@ -58,7 +58,6 @@
#define __div64_32(n, base) ({ \
unsigned long __upper, __low, __high, __radix; \
- unsigned long long __modquot; \
unsigned long long __quot; \
unsigned long long __div; \
unsigned long __mod; \
@@ -73,11 +72,8 @@
__upper = __high; \
__high = 0; \
} else { \
- __asm__("divu $0, %z1, %z2" \
- : "=x" (__modquot) \
- : "Jr" (__high), "Jr" (__radix)); \
- __upper = __modquot >> 32; \
- __high = __modquot; \
+ __upper = __high % __radix; \
+ __high /= __radix; \
} \
\
__mod = do_div64_32(__low, __upper, __low, __radix); \
From: Lukasz Luba <[email protected]>
commit fef05776eb02238dcad8d5514e666a42572c3f32 upstream.
The tz->lock must be hold during the looping over the instances in that
thermal zone. This lock was missing in the governor code since the
beginning, so it's hard to point into a particular commit.
CC: [email protected] # 4.4+
Signed-off-by: Lukasz Luba <[email protected]>
Signed-off-by: Daniel Lezcano <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/thermal/fair_share.c | 4 ++++
1 file changed, 4 insertions(+)
--- a/drivers/thermal/fair_share.c
+++ b/drivers/thermal/fair_share.c
@@ -82,6 +82,8 @@ static int fair_share_throttle(struct th
int total_instance = 0;
int cur_trip_level = get_trip_level(tz);
+ mutex_lock(&tz->lock);
+
list_for_each_entry(instance, &tz->thermal_instances, tz_node) {
if (instance->trip != trip)
continue;
@@ -110,6 +112,8 @@ static int fair_share_throttle(struct th
mutex_unlock(&instance->cdev->lock);
thermal_cdev_update(cdev);
}
+
+ mutex_unlock(&tz->lock);
return 0;
}
From: Phil Elwell <[email protected]>
commit 75a41ce46bae6cbe7d3bb2584eb844291d642874 upstream.
The dwc2 gadget support maps and unmaps DMA buffers as necessary. When
mapping and unmapping it uses the direction of the endpoint to select
the direction of the DMA transfer, but this fails for Control OUT
transfers because the unmap occurs after the endpoint direction has
been reversed for the status phase.
A possible solution would be to unmap the buffer before the direction
is changed, but a safer, less invasive fix is to remember the buffer
direction independently of the endpoint direction.
Fixes: fe0b94abcdf6 ("usb: dwc2: gadget: manage ep0 state in software")
Acked-by: Minas Harutyunyan <[email protected]>
Cc: stable <[email protected]>
Signed-off-by: Phil Elwell <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/dwc2/core.h | 2 ++
drivers/usb/dwc2/gadget.c | 3 ++-
2 files changed, 4 insertions(+), 1 deletion(-)
--- a/drivers/usb/dwc2/core.h
+++ b/drivers/usb/dwc2/core.h
@@ -112,6 +112,7 @@ struct dwc2_hsotg_req;
* @debugfs: File entry for debugfs file for this endpoint.
* @dir_in: Set to true if this endpoint is of the IN direction, which
* means that it is sending data to the Host.
+ * @map_dir: Set to the value of dir_in when the DMA buffer is mapped.
* @index: The index for the endpoint registers.
* @mc: Multi Count - number of transactions per microframe
* @interval: Interval for periodic endpoints, in frames or microframes.
@@ -161,6 +162,7 @@ struct dwc2_hsotg_ep {
unsigned short fifo_index;
unsigned char dir_in;
+ unsigned char map_dir;
unsigned char index;
unsigned char mc;
u16 interval;
--- a/drivers/usb/dwc2/gadget.c
+++ b/drivers/usb/dwc2/gadget.c
@@ -421,7 +421,7 @@ static void dwc2_hsotg_unmap_dma(struct
{
struct usb_request *req = &hs_req->req;
- usb_gadget_unmap_request(&hsotg->gadget, req, hs_ep->dir_in);
+ usb_gadget_unmap_request(&hsotg->gadget, req, hs_ep->map_dir);
}
/*
@@ -1242,6 +1242,7 @@ static int dwc2_hsotg_map_dma(struct dwc
{
int ret;
+ hs_ep->map_dir = hs_ep->dir_in;
ret = usb_gadget_map_request(&hsotg->gadget, req, hs_ep->dir_in);
if (ret)
goto dma_error;
From: Eric Biggers <[email protected]>
commit 3c0315424f5e3d2a4113c7272367bee1e8e6a174 upstream.
f2fs didn't properly clean up if verity failed to be enabled on a file:
- It left verity metadata (pages past EOF) in the page cache, which
would be exposed to userspace if the file was later extended.
- It didn't truncate the verity metadata at all (either from cache or
from disk) if an error occurred while setting the verity bit.
Fix these bugs by adding a call to truncate_inode_pages() and ensuring
that we truncate the verity metadata (both from cache and from disk) in
all error paths. Also rework the code to cleanly separate the success
path from the error paths, which makes it much easier to understand.
Finally, log a message if f2fs_truncate() fails, since it might
otherwise fail silently.
Reported-by: Yunlei He <[email protected]>
Fixes: 95ae251fe828 ("f2fs: add fs-verity support")
Cc: <[email protected]> # v5.4+
Signed-off-by: Eric Biggers <[email protected]>
Reviewed-by: Chao Yu <[email protected]>
Signed-off-by: Jaegeuk Kim <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/f2fs/verity.c | 79 ++++++++++++++++++++++++++++++++++++++-----------------
1 file changed, 56 insertions(+), 23 deletions(-)
--- a/fs/f2fs/verity.c
+++ b/fs/f2fs/verity.c
@@ -150,40 +150,73 @@ static int f2fs_end_enable_verity(struct
size_t desc_size, u64 merkle_tree_size)
{
struct inode *inode = file_inode(filp);
+ struct f2fs_sb_info *sbi = F2FS_I_SB(inode);
u64 desc_pos = f2fs_verity_metadata_pos(inode) + merkle_tree_size;
struct fsverity_descriptor_location dloc = {
.version = cpu_to_le32(1),
.size = cpu_to_le32(desc_size),
.pos = cpu_to_le64(desc_pos),
};
- int err = 0;
+ int err = 0, err2 = 0;
- if (desc != NULL) {
- /* Succeeded; write the verity descriptor. */
- err = pagecache_write(inode, desc, desc_size, desc_pos);
-
- /* Write all pages before clearing FI_VERITY_IN_PROGRESS. */
- if (!err)
- err = filemap_write_and_wait(inode->i_mapping);
- }
-
- /* If we failed, truncate anything we wrote past i_size. */
- if (desc == NULL || err)
- f2fs_truncate(inode);
+ /*
+ * If an error already occurred (which fs/verity/ signals by passing
+ * desc == NULL), then only clean-up is needed.
+ */
+ if (desc == NULL)
+ goto cleanup;
+
+ /* Append the verity descriptor. */
+ err = pagecache_write(inode, desc, desc_size, desc_pos);
+ if (err)
+ goto cleanup;
+
+ /*
+ * Write all pages (both data and verity metadata). Note that this must
+ * happen before clearing FI_VERITY_IN_PROGRESS; otherwise pages beyond
+ * i_size won't be written properly. For crash consistency, this also
+ * must happen before the verity inode flag gets persisted.
+ */
+ err = filemap_write_and_wait(inode->i_mapping);
+ if (err)
+ goto cleanup;
+
+ /* Set the verity xattr. */
+ err = f2fs_setxattr(inode, F2FS_XATTR_INDEX_VERITY,
+ F2FS_XATTR_NAME_VERITY, &dloc, sizeof(dloc),
+ NULL, XATTR_CREATE);
+ if (err)
+ goto cleanup;
+
+ /* Finally, set the verity inode flag. */
+ file_set_verity(inode);
+ f2fs_set_inode_flags(inode);
+ f2fs_mark_inode_dirty_sync(inode, true);
clear_inode_flag(inode, FI_VERITY_IN_PROGRESS);
+ return 0;
- if (desc != NULL && !err) {
- err = f2fs_setxattr(inode, F2FS_XATTR_INDEX_VERITY,
- F2FS_XATTR_NAME_VERITY, &dloc, sizeof(dloc),
- NULL, XATTR_CREATE);
- if (!err) {
- file_set_verity(inode);
- f2fs_set_inode_flags(inode);
- f2fs_mark_inode_dirty_sync(inode, true);
- }
+cleanup:
+ /*
+ * Verity failed to be enabled, so clean up by truncating any verity
+ * metadata that was written beyond i_size (both from cache and from
+ * disk) and clearing FI_VERITY_IN_PROGRESS.
+ *
+ * Taking i_gc_rwsem[WRITE] is needed to stop f2fs garbage collection
+ * from re-instantiating cached pages we are truncating (since unlike
+ * normal file accesses, garbage collection isn't limited by i_size).
+ */
+ down_write(&F2FS_I(inode)->i_gc_rwsem[WRITE]);
+ truncate_inode_pages(inode->i_mapping, inode->i_size);
+ err2 = f2fs_truncate(inode);
+ if (err2) {
+ f2fs_err(sbi, "Truncating verity metadata failed (errno=%d)",
+ err2);
+ set_sbi_flag(sbi, SBI_NEED_FSCK);
}
- return err;
+ up_write(&F2FS_I(inode)->i_gc_rwsem[WRITE]);
+ clear_inode_flag(inode, FI_VERITY_IN_PROGRESS);
+ return err ?: err2;
}
static int f2fs_get_verity_descriptor(struct inode *inode, void *buf,
From: Ard Biesheuvel <[email protected]>
commit e9a2f8b599d0bc22a1b13e69527246ac39c697b4 upstream
Before moving the DT mapping out of the linear region, let's prepare
for this change by removing all the phys-to-virt translations of the
__atags_pointer variable, and perform this translation only once at
setup time.
Tested-by: Linus Walleij <[email protected]>
Reviewed-by: Linus Walleij <[email protected]>
Acked-by: Nicolas Pitre <[email protected]>
Signed-off-by: Ard Biesheuvel <[email protected]>
Signed-off-by: Russell King <[email protected]>
Signed-off-by: Florian Fainelli <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/arm/include/asm/prom.h | 4 ++--
arch/arm/kernel/atags.h | 4 ++--
arch/arm/kernel/atags_parse.c | 6 +++---
arch/arm/kernel/devtree.c | 6 +++---
arch/arm/kernel/setup.c | 14 +++++++++-----
arch/arm/mm/mmu.c | 4 ++--
6 files changed, 21 insertions(+), 17 deletions(-)
--- a/arch/arm/include/asm/prom.h
+++ b/arch/arm/include/asm/prom.h
@@ -9,12 +9,12 @@
#ifdef CONFIG_OF
-extern const struct machine_desc *setup_machine_fdt(unsigned int dt_phys);
+extern const struct machine_desc *setup_machine_fdt(void *dt_virt);
extern void __init arm_dt_init_cpu_maps(void);
#else /* CONFIG_OF */
-static inline const struct machine_desc *setup_machine_fdt(unsigned int dt_phys)
+static inline const struct machine_desc *setup_machine_fdt(void *dt_virt)
{
return NULL;
}
--- a/arch/arm/kernel/atags.h
+++ b/arch/arm/kernel/atags.h
@@ -2,11 +2,11 @@
void convert_to_tag_list(struct tag *tags);
#ifdef CONFIG_ATAGS
-const struct machine_desc *setup_machine_tags(phys_addr_t __atags_pointer,
+const struct machine_desc *setup_machine_tags(void *__atags_vaddr,
unsigned int machine_nr);
#else
static inline const struct machine_desc * __init __noreturn
-setup_machine_tags(phys_addr_t __atags_pointer, unsigned int machine_nr)
+setup_machine_tags(void *__atags_vaddr, unsigned int machine_nr)
{
early_print("no ATAGS support: can't continue\n");
while (true);
--- a/arch/arm/kernel/atags_parse.c
+++ b/arch/arm/kernel/atags_parse.c
@@ -176,7 +176,7 @@ static void __init squash_mem_tags(struc
}
const struct machine_desc * __init
-setup_machine_tags(phys_addr_t __atags_pointer, unsigned int machine_nr)
+setup_machine_tags(void *atags_vaddr, unsigned int machine_nr)
{
struct tag *tags = (struct tag *)&default_tags;
const struct machine_desc *mdesc = NULL, *p;
@@ -197,8 +197,8 @@ setup_machine_tags(phys_addr_t __atags_p
if (!mdesc)
return NULL;
- if (__atags_pointer)
- tags = phys_to_virt(__atags_pointer);
+ if (atags_vaddr)
+ tags = atags_vaddr;
else if (mdesc->atag_offset)
tags = (void *)(PAGE_OFFSET + mdesc->atag_offset);
--- a/arch/arm/kernel/devtree.c
+++ b/arch/arm/kernel/devtree.c
@@ -203,12 +203,12 @@ static const void * __init arch_get_next
/**
* setup_machine_fdt - Machine setup when an dtb was passed to the kernel
- * @dt_phys: physical address of dt blob
+ * @dt_virt: virtual address of dt blob
*
* If a dtb was passed to the kernel in r2, then use it to choose the
* correct machine_desc and to setup the system.
*/
-const struct machine_desc * __init setup_machine_fdt(unsigned int dt_phys)
+const struct machine_desc * __init setup_machine_fdt(void *dt_virt)
{
const struct machine_desc *mdesc, *mdesc_best = NULL;
@@ -221,7 +221,7 @@ const struct machine_desc * __init setup
mdesc_best = &__mach_desc_GENERIC_DT;
#endif
- if (!dt_phys || !early_init_dt_verify(phys_to_virt(dt_phys)))
+ if (!dt_virt || !early_init_dt_verify(dt_virt))
return NULL;
mdesc = of_flat_dt_match_machine(mdesc_best, arch_get_next_mach);
--- a/arch/arm/kernel/setup.c
+++ b/arch/arm/kernel/setup.c
@@ -89,6 +89,7 @@ unsigned int cacheid __read_mostly;
EXPORT_SYMBOL(cacheid);
unsigned int __atags_pointer __initdata;
+void *atags_vaddr __initdata;
unsigned int system_rev;
EXPORT_SYMBOL(system_rev);
@@ -1075,19 +1076,22 @@ void __init hyp_mode_check(void)
void __init setup_arch(char **cmdline_p)
{
- const struct machine_desc *mdesc;
+ const struct machine_desc *mdesc = NULL;
+
+ if (__atags_pointer)
+ atags_vaddr = phys_to_virt(__atags_pointer);
setup_processor();
- mdesc = setup_machine_fdt(__atags_pointer);
+ if (atags_vaddr)
+ mdesc = setup_machine_fdt(atags_vaddr);
if (!mdesc)
- mdesc = setup_machine_tags(__atags_pointer, __machine_arch_type);
+ mdesc = setup_machine_tags(atags_vaddr, __machine_arch_type);
if (!mdesc) {
early_print("\nError: invalid dtb and unrecognized/unsupported machine ID\n");
early_print(" r1=0x%08x, r2=0x%08x\n", __machine_arch_type,
__atags_pointer);
if (__atags_pointer)
- early_print(" r2[]=%*ph\n", 16,
- phys_to_virt(__atags_pointer));
+ early_print(" r2[]=%*ph\n", 16, atags_vaddr);
dump_machine_table();
}
--- a/arch/arm/mm/mmu.c
+++ b/arch/arm/mm/mmu.c
@@ -1512,7 +1512,7 @@ static void __init map_lowmem(void)
}
#ifdef CONFIG_ARM_PV_FIXUP
-extern unsigned long __atags_pointer;
+extern void *atags_vaddr;
typedef void pgtables_remap(long long offset, unsigned long pgd, void *bdata);
pgtables_remap lpae_pgtables_remap_asm;
@@ -1543,7 +1543,7 @@ static void __init early_paging_init(con
*/
lpae_pgtables_remap = (pgtables_remap *)(unsigned long)__pa(lpae_pgtables_remap_asm);
pa_pgd = __pa(swapper_pg_dir);
- boot_data = __va(__atags_pointer);
+ boot_data = atags_vaddr;
barrier();
pr_info("Switching physical address space to 0x%08llx\n",
From: Ard Biesheuvel <[email protected]>
commit 7a1be318f5795cb66fa0dc86b3ace427fe68057f upstream
On ARM, setting up the linear region is tricky, given the constraints
around placement and alignment of the memblocks, and how the kernel
itself as well as the DT are placed in physical memory.
Let's simplify matters a bit, by moving the device tree mapping to the
top of the address space, right between the end of the vmalloc region
and the start of the the fixmap region, and create a read-only mapping
for it that is independent of the size of the linear region, and how it
is organized.
Since this region was formerly used as a guard region, which will now be
populated fully on LPAE builds by this read-only mapping (which will
still be able to function as a guard region for stray writes), bump the
start of the [underutilized] fixmap region by 512 KB as well, to ensure
that there is always a proper guard region here. Doing so still leaves
ample room for the fixmap space, even with NR_CPUS set to its maximum
value of 32.
Tested-by: Linus Walleij <[email protected]>
Reviewed-by: Linus Walleij <[email protected]>
Reviewed-by: Nicolas Pitre <[email protected]>
Signed-off-by: Ard Biesheuvel <[email protected]>
Signed-off-by: Russell King <[email protected]>
Signed-off-by: Florian Fainelli <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
Documentation/arm/memory.rst | 7 ++++++-
arch/arm/include/asm/fixmap.h | 2 +-
arch/arm/include/asm/memory.h | 5 +++++
arch/arm/kernel/head.S | 5 ++---
arch/arm/kernel/setup.c | 11 ++++++++---
arch/arm/mm/init.c | 1 -
arch/arm/mm/mmu.c | 20 ++++++++++++++------
arch/arm/mm/pv-fixup-asm.S | 4 ++--
8 files changed, 38 insertions(+), 17 deletions(-)
--- a/Documentation/arm/memory.rst
+++ b/Documentation/arm/memory.rst
@@ -45,9 +45,14 @@ fffe8000 fffeffff DTCM mapping area for
fffe0000 fffe7fff ITCM mapping area for platforms with
ITCM mounted inside the CPU.
-ffc00000 ffefffff Fixmap mapping region. Addresses provided
+ffc80000 ffefffff Fixmap mapping region. Addresses provided
by fix_to_virt() will be located here.
+ffc00000 ffc7ffff Guard region
+
+ff800000 ffbfffff Permanent, fixed read-only mapping of the
+ firmware provided DT blob
+
fee00000 feffffff Mapping of PCI I/O space. This is a static
mapping within the vmalloc space.
--- a/arch/arm/include/asm/fixmap.h
+++ b/arch/arm/include/asm/fixmap.h
@@ -2,7 +2,7 @@
#ifndef _ASM_FIXMAP_H
#define _ASM_FIXMAP_H
-#define FIXADDR_START 0xffc00000UL
+#define FIXADDR_START 0xffc80000UL
#define FIXADDR_END 0xfff00000UL
#define FIXADDR_TOP (FIXADDR_END - PAGE_SIZE)
--- a/arch/arm/include/asm/memory.h
+++ b/arch/arm/include/asm/memory.h
@@ -67,6 +67,10 @@
*/
#define XIP_VIRT_ADDR(physaddr) (MODULES_VADDR + ((physaddr) & 0x000fffff))
+#define FDT_FIXED_BASE UL(0xff800000)
+#define FDT_FIXED_SIZE (2 * PMD_SIZE)
+#define FDT_VIRT_ADDR(physaddr) ((void *)(FDT_FIXED_BASE | (physaddr) % PMD_SIZE))
+
#if !defined(CONFIG_SMP) && !defined(CONFIG_ARM_LPAE)
/*
* Allow 16MB-aligned ioremap pages
@@ -107,6 +111,7 @@ extern unsigned long vectors_base;
#define MODULES_VADDR PAGE_OFFSET
#define XIP_VIRT_ADDR(physaddr) (physaddr)
+#define FDT_VIRT_ADDR(physaddr) ((void *)(physaddr))
#endif /* !CONFIG_MMU */
--- a/arch/arm/kernel/head.S
+++ b/arch/arm/kernel/head.S
@@ -275,9 +275,8 @@ __create_page_tables:
*/
mov r0, r2, lsr #SECTION_SHIFT
movs r0, r0, lsl #SECTION_SHIFT
- subne r3, r0, r8
- addne r3, r3, #PAGE_OFFSET
- addne r3, r4, r3, lsr #(SECTION_SHIFT - PMD_ORDER)
+ ldrne r3, =FDT_FIXED_BASE >> (SECTION_SHIFT - PMD_ORDER)
+ addne r3, r3, r4
orrne r6, r7, r0
strne r6, [r3], #1 << PMD_ORDER
addne r6, r6, #1 << SECTION_SHIFT
--- a/arch/arm/kernel/setup.c
+++ b/arch/arm/kernel/setup.c
@@ -18,6 +18,7 @@
#include <linux/of_platform.h>
#include <linux/init.h>
#include <linux/kexec.h>
+#include <linux/libfdt.h>
#include <linux/of_fdt.h>
#include <linux/cpu.h>
#include <linux/interrupt.h>
@@ -89,7 +90,6 @@ unsigned int cacheid __read_mostly;
EXPORT_SYMBOL(cacheid);
unsigned int __atags_pointer __initdata;
-void *atags_vaddr __initdata;
unsigned int system_rev;
EXPORT_SYMBOL(system_rev);
@@ -1077,13 +1077,18 @@ void __init hyp_mode_check(void)
void __init setup_arch(char **cmdline_p)
{
const struct machine_desc *mdesc = NULL;
+ void *atags_vaddr = NULL;
if (__atags_pointer)
- atags_vaddr = phys_to_virt(__atags_pointer);
+ atags_vaddr = FDT_VIRT_ADDR(__atags_pointer);
setup_processor();
- if (atags_vaddr)
+ if (atags_vaddr) {
mdesc = setup_machine_fdt(atags_vaddr);
+ if (mdesc)
+ memblock_reserve(__atags_pointer,
+ fdt_totalsize(atags_vaddr));
+ }
if (!mdesc)
mdesc = setup_machine_tags(atags_vaddr, __machine_arch_type);
if (!mdesc) {
--- a/arch/arm/mm/init.c
+++ b/arch/arm/mm/init.c
@@ -274,7 +274,6 @@ void __init arm_memblock_init(const stru
if (mdesc->reserve)
mdesc->reserve();
- early_init_fdt_reserve_self();
early_init_fdt_scan_reserved_mem();
/* reserve memory for DMA contiguous allocations */
--- a/arch/arm/mm/mmu.c
+++ b/arch/arm/mm/mmu.c
@@ -39,6 +39,8 @@
#include "mm.h"
#include "tcm.h"
+extern unsigned long __atags_pointer;
+
/*
* empty_zero_page is a special page that is used for
* zero-initialized data and COW.
@@ -962,7 +964,7 @@ static void __init create_mapping(struct
return;
}
- if ((md->type == MT_DEVICE || md->type == MT_ROM) &&
+ if (md->type == MT_DEVICE &&
md->virtual >= PAGE_OFFSET && md->virtual < FIXADDR_START &&
(md->virtual < VMALLOC_START || md->virtual >= VMALLOC_END)) {
pr_warn("BUG: mapping for 0x%08llx at 0x%08lx out of vmalloc space\n",
@@ -1352,6 +1354,15 @@ static void __init devicemaps_init(const
for (addr = VMALLOC_START; addr < (FIXADDR_TOP & PMD_MASK); addr += PMD_SIZE)
pmd_clear(pmd_off_k(addr));
+ if (__atags_pointer) {
+ /* create a read-only mapping of the device tree */
+ map.pfn = __phys_to_pfn(__atags_pointer & SECTION_MASK);
+ map.virtual = FDT_FIXED_BASE;
+ map.length = FDT_FIXED_SIZE;
+ map.type = MT_ROM;
+ create_mapping(&map);
+ }
+
/*
* Map the kernel if it is XIP.
* It is always first in the modulearea.
@@ -1512,8 +1523,7 @@ static void __init map_lowmem(void)
}
#ifdef CONFIG_ARM_PV_FIXUP
-extern void *atags_vaddr;
-typedef void pgtables_remap(long long offset, unsigned long pgd, void *bdata);
+typedef void pgtables_remap(long long offset, unsigned long pgd);
pgtables_remap lpae_pgtables_remap_asm;
/*
@@ -1526,7 +1536,6 @@ static void __init early_paging_init(con
unsigned long pa_pgd;
unsigned int cr, ttbcr;
long long offset;
- void *boot_data;
if (!mdesc->pv_fixup)
return;
@@ -1543,7 +1552,6 @@ static void __init early_paging_init(con
*/
lpae_pgtables_remap = (pgtables_remap *)(unsigned long)__pa(lpae_pgtables_remap_asm);
pa_pgd = __pa(swapper_pg_dir);
- boot_data = atags_vaddr;
barrier();
pr_info("Switching physical address space to 0x%08llx\n",
@@ -1579,7 +1587,7 @@ static void __init early_paging_init(con
* needs to be assembly. It's fairly simple, as we're using the
* temporary tables setup by the initial assembly code.
*/
- lpae_pgtables_remap(offset, pa_pgd, boot_data);
+ lpae_pgtables_remap(offset, pa_pgd);
/* Re-enable the caches and cacheable TLB walks */
asm volatile("mcr p15, 0, %0, c2, c0, 2" : : "r" (ttbcr));
--- a/arch/arm/mm/pv-fixup-asm.S
+++ b/arch/arm/mm/pv-fixup-asm.S
@@ -39,8 +39,8 @@ ENTRY(lpae_pgtables_remap_asm)
/* Update level 2 entries for the boot data */
add r7, r2, #0x1000
- add r7, r7, r3, lsr #SECTION_SHIFT - L2_ORDER
- bic r7, r7, #(1 << L2_ORDER) - 1
+ movw r3, #FDT_FIXED_BASE >> (SECTION_SHIFT - L2_ORDER)
+ add r7, r7, r3
ldrd r4, r5, [r7]
adds r4, r4, r0
adc r5, r5, r1
From: Ard Biesheuvel <[email protected]>
commit fc2933c133744305236793025b00c2f7d258b687 upstream
Commit
149a3ffe62b9dbc3 ("9012/1: move device tree mapping out of linear region")
created a permanent, read-only section mapping of the device tree blob
provided by the firmware, and added a set of macros to get the base and
size of the virtually mapped FDT based on the physical address. However,
while the mapping code uses the SECTION_SIZE macro correctly, the macros
use PMD_SIZE instead, which means something entirely different on ARM when
using short descriptors, and is therefore not the right quantity to use
here. So replace PMD_SIZE with SECTION_SIZE. While at it, change the names
of the macro and its parameter to clarify that it returns the virtual
address of the start of the FDT, based on the physical address in memory.
Tested-by: Joel Stanley <[email protected]>
Tested-by: Marek Szyprowski <[email protected]>
Signed-off-by: Ard Biesheuvel <[email protected]>
Signed-off-by: Russell King <[email protected]>
Signed-off-by: Florian Fainelli <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/arm/include/asm/memory.h | 6 +++---
arch/arm/kernel/setup.c | 2 +-
2 files changed, 4 insertions(+), 4 deletions(-)
--- a/arch/arm/include/asm/memory.h
+++ b/arch/arm/include/asm/memory.h
@@ -68,8 +68,8 @@
#define XIP_VIRT_ADDR(physaddr) (MODULES_VADDR + ((physaddr) & 0x000fffff))
#define FDT_FIXED_BASE UL(0xff800000)
-#define FDT_FIXED_SIZE (2 * PMD_SIZE)
-#define FDT_VIRT_ADDR(physaddr) ((void *)(FDT_FIXED_BASE | (physaddr) % PMD_SIZE))
+#define FDT_FIXED_SIZE (2 * SECTION_SIZE)
+#define FDT_VIRT_BASE(physbase) ((void *)(FDT_FIXED_BASE | (physbase) % SECTION_SIZE))
#if !defined(CONFIG_SMP) && !defined(CONFIG_ARM_LPAE)
/*
@@ -111,7 +111,7 @@ extern unsigned long vectors_base;
#define MODULES_VADDR PAGE_OFFSET
#define XIP_VIRT_ADDR(physaddr) (physaddr)
-#define FDT_VIRT_ADDR(physaddr) ((void *)(physaddr))
+#define FDT_VIRT_BASE(physbase) ((void *)(physbase))
#endif /* !CONFIG_MMU */
--- a/arch/arm/kernel/setup.c
+++ b/arch/arm/kernel/setup.c
@@ -1080,7 +1080,7 @@ void __init setup_arch(char **cmdline_p)
void *atags_vaddr = NULL;
if (__atags_pointer)
- atags_vaddr = FDT_VIRT_ADDR(__atags_pointer);
+ atags_vaddr = FDT_VIRT_BASE(__atags_pointer);
setup_processor();
if (atags_vaddr) {
From: Ard Biesheuvel <[email protected]>
commit 10fce53c0ef8f6e79115c3d9e0d7ea1338c3fa37 upstream
The early ATAGS/DT mapping code uses SECTION_SHIFT to mask low order
bits of R2, and decides that no ATAGS/DTB were provided if the resulting
value is 0x0.
This means that on systems where DRAM starts at 0x0 (such as Raspberry
Pi), no explicit mapping of the DT will be created if R2 points into the
first 1 MB section of memory. This was not a problem before, because the
decompressed kernel is loaded at the base of DRAM and mapped using
sections as well, and so as long as the DT is referenced via a virtual
address that uses the same translation (the linear map, in this case),
things work fine.
However, commit 7a1be318f579 ("9012/1: move device tree mapping out of
linear region") changes this, and now the DT is referenced via a virtual
address that is disjoint from the linear mapping of DRAM, and so we need
the early code to create the DT mapping unconditionally.
So let's create the early DT mapping for any value of R2 != 0x0.
Reported-by: "kernelci.org bot" <[email protected]>
Reviewed-by: Linus Walleij <[email protected]>
Signed-off-by: Ard Biesheuvel <[email protected]>
Signed-off-by: Russell King <[email protected]>
Signed-off-by: Florian Fainelli <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/arm/kernel/head.S | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/arch/arm/kernel/head.S
+++ b/arch/arm/kernel/head.S
@@ -274,10 +274,10 @@ __create_page_tables:
* We map 2 sections in case the ATAGs/DTB crosses a section boundary.
*/
mov r0, r2, lsr #SECTION_SHIFT
- movs r0, r0, lsl #SECTION_SHIFT
+ cmp r2, #0
ldrne r3, =FDT_FIXED_BASE >> (SECTION_SHIFT - PMD_ORDER)
addne r3, r3, r4
- orrne r6, r7, r0
+ orrne r6, r7, r0, lsl #SECTION_SHIFT
strne r6, [r3], #1 << PMD_ORDER
addne r6, r6, #1 << SECTION_SHIFT
strne r6, [r3]
From: Badhri Jagan Sridharan <[email protected]>
commit 374157ff88ae1a7f7927331cbc72c1ec11994e8a upstream.
"usb: typec: tcpm: Address incorrect values of tcpm psy for pps supply"
introduced a regression for req_out_volt and req_op_curr calculation.
req_out_volt should consider the newly calculated max voltage instead
of previously accepted max voltage by the port partner. Likewise,
req_op_curr should consider the newly calculated max current instead
of previously accepted max current by the port partner.
Fixes: e3a072022487 ("usb: typec: tcpm: Address incorrect values of tcpm psy for pps supply")
Reviewed-by: Guenter Roeck <[email protected]>
Signed-off-by: Badhri Jagan Sridharan <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/typec/tcpm/tcpm.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
--- a/drivers/usb/typec/tcpm/tcpm.c
+++ b/drivers/usb/typec/tcpm/tcpm.c
@@ -2339,10 +2339,10 @@ static unsigned int tcpm_pd_select_pps_a
port->pps_data.req_max_volt = min(pdo_pps_apdo_max_voltage(src),
pdo_pps_apdo_max_voltage(snk));
port->pps_data.req_max_curr = min_pps_apdo_current(src, snk);
- port->pps_data.req_out_volt = min(port->pps_data.max_volt,
- max(port->pps_data.min_volt,
+ port->pps_data.req_out_volt = min(port->pps_data.req_max_volt,
+ max(port->pps_data.req_min_volt,
port->pps_data.req_out_volt));
- port->pps_data.req_op_curr = min(port->pps_data.max_curr,
+ port->pps_data.req_op_curr = min(port->pps_data.req_max_curr,
port->pps_data.req_op_curr);
}
From: Chunfeng Yun <[email protected]>
commit 975f94c7d6c306b833628baa9aec3f79db1eb3a1 upstream.
This may happen if the port becomes resume status exactly
when usb_port_resume() gets port status, it still need provide
a TRSMCRY time before access the device.
CC: <[email protected]>
Reported-by: Tianping Fang <[email protected]>
Acked-by: Alan Stern <[email protected]>
Signed-off-by: Chunfeng Yun <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/core/hub.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -3574,9 +3574,6 @@ int usb_port_resume(struct usb_device *u
* sequence.
*/
status = hub_port_status(hub, port1, &portstatus, &portchange);
-
- /* TRSMRCY = 10 msec */
- msleep(10);
}
SuspendCleared:
@@ -3591,6 +3588,9 @@ int usb_port_resume(struct usb_device *u
usb_clear_port_feature(hub->hdev, port1,
USB_PORT_FEAT_C_SUSPEND);
}
+
+ /* TRSMRCY = 10 msec */
+ msleep(10);
}
if (udev->persist_enabled)
From: Greg Kroah-Hartman <[email protected]>
commit b4104180a2efb85f55e1ba1407885c9421970338 upstream.
syzbot can trigger the WARN() in init_uevent_argv() which isn't the
nicest as the code does properly recover and handle the error. So
change the WARN() call to pr_warn() and provide some more information on
what the buffer size that was needed.
Link: https://lore.kernel.org/r/[email protected]
Cc: "Rafael J. Wysocki" <[email protected]>
Cc: [email protected]
Reported-by: [email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
lib/kobject_uevent.c | 9 +++++----
1 file changed, 5 insertions(+), 4 deletions(-)
--- a/lib/kobject_uevent.c
+++ b/lib/kobject_uevent.c
@@ -251,12 +251,13 @@ static int kobj_usermode_filter(struct k
static int init_uevent_argv(struct kobj_uevent_env *env, const char *subsystem)
{
+ int buffer_size = sizeof(env->buf) - env->buflen;
int len;
- len = strlcpy(&env->buf[env->buflen], subsystem,
- sizeof(env->buf) - env->buflen);
- if (len >= (sizeof(env->buf) - env->buflen)) {
- WARN(1, KERN_ERR "init_uevent_argv: buffer size too small\n");
+ len = strlcpy(&env->buf[env->buflen], subsystem, buffer_size);
+ if (len >= buffer_size) {
+ pr_warn("init_uevent_argv: buffer size of %d too small, needed %d\n",
+ buffer_size, len);
return -ENOMEM;
}
From: Paweł Chmiel <[email protected]>
commit 34138a59b92c1a30649a18ec442d2e61f3bc34dd upstream.
This clock must be always enabled to allow access to any registers in
fsys1 CMU. Until proper solution based on runtime PM is applied
(similar to what was done for Exynos5433), mark that clock as critical
so it won't be disabled.
It was observed on Samsung Galaxy S6 device (based on Exynos7420), where
UFS module is probed before pmic used to power that device.
In this case defer probe was happening and that clock was disabled by
UFS driver, causing whole boot to hang on next CMU access.
Fixes: 753195a749a6 ("clk: samsung: exynos7: Correct CMU_FSYS1 clocks names")
Signed-off-by: Paweł Chmiel <[email protected]>
Acked-by: Krzysztof Kozlowski <[email protected]>
Link: https://lore.kernel.org/linux-clk/[email protected]
[s.nawrocki: Added comment in the code]
Signed-off-by: Sylwester Nawrocki <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/clk/samsung/clk-exynos7.c | 7 ++++++-
1 file changed, 6 insertions(+), 1 deletion(-)
--- a/drivers/clk/samsung/clk-exynos7.c
+++ b/drivers/clk/samsung/clk-exynos7.c
@@ -537,8 +537,13 @@ static const struct samsung_gate_clock t
GATE(CLK_ACLK_FSYS0_200, "aclk_fsys0_200", "dout_aclk_fsys0_200",
ENABLE_ACLK_TOP13, 28, CLK_SET_RATE_PARENT |
CLK_IS_CRITICAL, 0),
+ /*
+ * This clock is required for the CMU_FSYS1 registers access, keep it
+ * enabled permanently until proper runtime PM support is added.
+ */
GATE(CLK_ACLK_FSYS1_200, "aclk_fsys1_200", "dout_aclk_fsys1_200",
- ENABLE_ACLK_TOP13, 24, CLK_SET_RATE_PARENT, 0),
+ ENABLE_ACLK_TOP13, 24, CLK_SET_RATE_PARENT |
+ CLK_IS_CRITICAL, 0),
GATE(CLK_SCLK_PHY_FSYS1_26M, "sclk_phy_fsys1_26m",
"dout_sclk_phy_fsys1_26m", ENABLE_SCLK_TOP1_FSYS11,
From: Christoph Hellwig <[email protected]>
commit 53fe2a30bc168db9700e00206d991ff934973cf1 upstream.
Do not call nvme_configure_apst when the controller is not live, given
that nvme_configure_apst will fail due the lack of an admin queue when
the controller is being torn down and nvme_set_latency_tolerance is
called from dev_pm_qos_hide_latency_tolerance.
Fixes: 510a405d945b("nvme: fix memory leak for power latency tolerance")
Reported-by: Peng Liu <[email protected]>
Signed-off-by: Christoph Hellwig <[email protected]>
Reviewed-by: Keith Busch <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/nvme/host/core.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/drivers/nvme/host/core.c
+++ b/drivers/nvme/host/core.c
@@ -2414,7 +2414,8 @@ static void nvme_set_latency_tolerance(s
if (ctrl->ps_max_latency_us != latency) {
ctrl->ps_max_latency_us = latency;
- nvme_configure_apst(ctrl);
+ if (ctrl->state == NVME_CTRL_LIVE)
+ nvme_configure_apst(ctrl);
}
}
From: Kuninori Morimoto <[email protected]>
commit a4856e15e58b54977f1c0c0299309ad4d1f13365 upstream.
commit 66c705d07d784 ("SoC: rsnd: add interrupt support for SSI BUSIF
buffer") adds __rsnd_ssi_interrupt() checks for BUSIF status,
but is using "break" at for loop.
This means it is not checking all status. Let's check all BUSIF status.
Fixes: commit 66c705d07d784 ("SoC: rsnd: add interrupt support for SSI BUSIF buffer")
Signed-off-by: Kuninori Morimoto <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
sound/soc/sh/rcar/ssi.c | 2 --
1 file changed, 2 deletions(-)
--- a/sound/soc/sh/rcar/ssi.c
+++ b/sound/soc/sh/rcar/ssi.c
@@ -797,7 +797,6 @@ static void __rsnd_ssi_interrupt(struct
SSI_SYS_STATUS(i * 2),
0xf << (id * 4));
stop = true;
- break;
}
}
break;
@@ -815,7 +814,6 @@ static void __rsnd_ssi_interrupt(struct
SSI_SYS_STATUS((i * 2) + 1),
0xf << 4);
stop = true;
- break;
}
}
break;
From: Jonathon Reinhart <[email protected]>
commit 2671fa4dc0109d3fb581bc3078fdf17b5d9080f6 upstream.
These sysctls point to global variables:
- NF_SYSCTL_CT_MAX (&nf_conntrack_max)
- NF_SYSCTL_CT_EXPECT_MAX (&nf_ct_expect_max)
- NF_SYSCTL_CT_BUCKETS (&nf_conntrack_htable_size_user)
Because their data pointers are not updated to point to per-netns
structures, they must be marked read-only in a non-init_net ns.
Otherwise, changes in any net namespace are reflected in (leaked into)
all other net namespaces. This problem has existed since the
introduction of net namespaces.
The current logic marks them read-only only if the net namespace is
owned by an unprivileged user (other than init_user_ns).
Commit d0febd81ae77 ("netfilter: conntrack: re-visit sysctls in
unprivileged namespaces") "exposes all sysctls even if the namespace is
unpriviliged." Since we need to mark them readonly in any case, we can
forego the unprivileged user check altogether.
Fixes: d0febd81ae77 ("netfilter: conntrack: re-visit sysctls in unprivileged namespaces")
Signed-off-by: Jonathon Reinhart <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/netfilter/nf_conntrack_standalone.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
--- a/net/netfilter/nf_conntrack_standalone.c
+++ b/net/netfilter/nf_conntrack_standalone.c
@@ -1071,8 +1071,11 @@ static int nf_conntrack_standalone_init_
#endif
}
- if (!net_eq(&init_net, net))
+ if (!net_eq(&init_net, net)) {
+ table[NF_SYSCTL_CT_MAX].mode = 0444;
+ table[NF_SYSCTL_CT_EXPECT_MAX].mode = 0444;
table[NF_SYSCTL_CT_BUCKETS].mode = 0444;
+ }
net->ct.sysctl_header = register_net_sysctl(net, "net/netfilter", table);
if (!net->ct.sysctl_header)
On 5/17/2021 7:00 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.4.120 release.
> There are 141 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed, 19 May 2021 14:02:20 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.4.120-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.4.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
On ARCH_BRCMSTB using 32-bit and 64-bit ARM kernels:
Tested-by: Florian Fainelli <[email protected]>
--
Florian
On 5/17/21 8:00 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.4.120 release.
> There are 141 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed, 19 May 2021 14:02:20 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.4.120-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.4.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
>
Compiled and booted on my test system. No dmesg regressions.
Tested-by: Shuah Khan <[email protected]>
thanks,
-- Shuah
Hi Greg,
On Mon, May 17, 2021 at 04:00:52PM +0200, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.4.120 release.
> There are 141 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed, 19 May 2021 14:02:20 +0000.
> Anything received after that time might be too late.
Build test:
mips (gcc version 11.1.1 20210430): 65 configs -> no failure
arm (gcc version 11.1.1 20210430): 107 configs -> no new failure
x86_64 (gcc version 10.2.1 20210110): 2 configs -> no failure
Boot test:
x86_64: Booted on my test laptop. No regression.
x86_64: Booted on qemu. No regression.
Tested-by: Sudip Mukherjee <[email protected]>
--
Regards
Sudip
On Mon, 17 May 2021 at 19:33, Greg Kroah-Hartman
<[email protected]> wrote:
>
> This is the start of the stable review cycle for the 5.4.120 release.
> There are 141 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed, 19 May 2021 14:02:20 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.4.120-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.4.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
Results from Linaro’s test farm.
No regressions on arm64, arm, x86_64, and i386.
Tested-by: Linux Kernel Functional Testing <[email protected]>
## Build
* kernel: 5.4.120-rc1
* git: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
* git branch: linux-5.4.y
* git commit: d406e11dbc1324e375ab1f7c4669abc3cbd994f4
* git describe: v5.4.119-142-gd406e11dbc13
* test details:
https://qa-reports.linaro.org/lkft/linux-stable-rc-linux-5.4.y/build/v5.4.119-142-gd406e11dbc13
## No regressions (compared to v5.4.119)
## Fixes (compared to v5.4.119)
* arm, build
- clang-10-axm55xx_defconfig
- clang-11-axm55xx_defconfig
- clang-12-axm55xx_defconfig
- gcc-10-axm55xx_defconfig
- gcc-8-axm55xx_defconfig
- gcc-9-axm55xx_defconfig
* mips, build
- clang-10-allnoconfig
- clang-10-defconfig
- clang-10-tinyconfig
- clang-11-allnoconfig
- clang-11-defconfig
- clang-11-tinyconfig
- clang-12-allnoconfig
- clang-12-defconfig
- clang-12-tinyconfig
## Test result summary
total: 66208, pass: 53791, fail: 1226, skip: 10340, xfail: 851,
## Build Summary
* arc: 10 total, 10 passed, 0 failed
* arm: 192 total, 192 passed, 0 failed
* arm64: 26 total, 26 passed, 0 failed
* dragonboard-410c: 1 total, 1 passed, 0 failed
* hi6220-hikey: 1 total, 1 passed, 0 failed
* i386: 15 total, 15 passed, 0 failed
* juno-r2: 1 total, 1 passed, 0 failed
* mips: 45 total, 45 passed, 0 failed
* parisc: 9 total, 9 passed, 0 failed
* powerpc: 27 total, 27 passed, 0 failed
* riscv: 21 total, 21 passed, 0 failed
* s390: 9 total, 9 passed, 0 failed
* sh: 18 total, 18 passed, 0 failed
* sparc: 9 total, 9 passed, 0 failed
* x15: 1 total, 1 passed, 0 failed
* x86: 1 total, 1 passed, 0 failed
* x86_64: 26 total, 26 passed, 0 failed
## Test suites summary
* fwts
* igt-gpu-tools
* install-android-platform-tools-r2600
* kselftest-android
* kselftest-breakpoints
* kselftest-capabilities
* kselftest-cgroup
* kselftest-clone3
* kselftest-core
* kselftest-cpu-hotplug
* kselftest-cpufreq
* kselftest-drivers
* kselftest-efivarfs
* kselftest-filesystems
* kselftest-firmware
* kselftest-fpu
* kselftest-futex
* kselftest-gpio
* kselftest-intel_pstate
* kselftest-ipc
* kselftest-ir
* kselftest-kcmp
* kselftest-kexec
* kselftest-kvm
* kselftest-lib
* kselftest-livepatch
* kselftest-lkdtm
* kselftest-membarrier
* kselftest-memfd
* kselftest-memory-hotplug
* kselftest-mincore
* kselftest-mount
* kselftest-mqueue
* kselftest-net
* kselftest-netfilter
* kselftest-nsfs
* kselftest-openat2
* kselftest-pid_namespace
* kselftest-pidfd
* kselftest-proc
* kselftest-pstore
* kselftest-ptrace
* kselftest-rseq
* kselftest-rtc
* kselftest-seccomp
* kselftest-sigaltstack
* kselftest-size
* kselftest-splice
* kselftest-static_keys
* kselftest-sync
* kselftest-sysctl
* kselftest-timens
* kselftest-timers
* kselftest-tmpfs
* kselftest-tpm2
* kselftest-user
* kselftest-vm
* kselftest-x86
* kselftest-zram
* kvm-unit-tests
* libhugetlbfs
* linux-log-parser
* ltp-cap_bounds-tests
* ltp-commands-tests
* ltp-containers-tests
* ltp-controllers-tests
* ltp-cpuhotplug-tests
* ltp-crypto-tests
* ltp-cve-tests
* ltp-dio-tests
* ltp-fcntl-locktests-tests
* ltp-filecaps-tests
* ltp-fs-tests
* ltp-fs_bind-tests
* ltp-fs_perms_simple-tests
* ltp-fsx-tests
* ltp-hugetlb-tests
* ltp-io-tests
* ltp-ipc-tests
* ltp-math-tests
* ltp-mm-tests
* ltp-nptl-tests
* ltp-open-posix-tests
* ltp-pty-tests
* ltp-sched-tests
* ltp-securebits-tests
* ltp-syscalls-tests
* ltp-tracing-tests
* network-basic-tests
* packetdrill
* perf
* rcutorture
* ssuite
* v4l2-compliance
--
Linaro LKFT
https://lkft.linaro.org
On 2021/5/17 22:00, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.4.120 release.
> There are 141 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed, 19 May 2021 14:02:20 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.4.120-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.4.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
>
Tested on arm64 and x86 for 5.4.120-rc1,
Kernel repo:
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
Branch: linux-5.4.y
Version: 5.4.120-rc1
Commit: d406e11dbc1324e375ab1f7c4669abc3cbd994f4
Compiler: gcc version 7.3.0 (GCC)
arm64:
--------------------------------------------------------------------
Testcase Result Summary:
total: 8895
passed: 8895
failed: 0
timeout: 0
--------------------------------------------------------------------
x86:
--------------------------------------------------------------------
Testcase Result Summary:
total: 8895
passed: 8895
failed: 0
timeout: 0
--------------------------------------------------------------------
Tested-by: Hulk Robot <[email protected]>
On Mon, May 17, 2021 at 04:00:52PM +0200, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.4.120 release.
> There are 141 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed, 19 May 2021 14:02:20 +0000.
> Anything received after that time might be too late.
>
Build results:
total: 157 pass: 157 fail: 0
Qemu test results:
total: 428 pass: 428 fail: 0
Tested-by: Guenter Roeck <[email protected]>
Guenter
On Mon, 2021-05-17 at 16:01 +0200, Greg Kroah-Hartman wrote:
From: Eric Dumazet <[email protected]>
[ Upstream commit 40cb881b5aaa0b69a7d93dec8440d5c62dae299f ]
Hi Greg,
There's fixup to this commit, hit the "unregister_netdevice" problems in 5.4.120
while running kernel selftests.
(also check the "Fixes:" tags, I think not all of them were yet included in 5.4.y)
commit 0d7a7b2014b1a499a0fe24c9f3063d7856b5aaaf
Author: Eric Dumazet <[email protected]>
Date: Wed Mar 31 14:38:11 2021 -0700
ipv6: remove extra dev_hold() for fallback tunnels
My previous commits added a dev_hold() in tunnels ndo_init(),
but forgot to remove it from special functions setting up fallback tunnels.
Fallback tunnels do call their respective ndo_init()
This leads to various reports like :
unregister_netdevice: waiting for ip6gre0 to become free. Usage count = 2
Fixes: 48bb5697269a ("ip6_tunnel: sit: proper dev_{hold|put} in ndo_[un]init methods")
Fixes: 6289a98f0817 ("sit: proper dev_{hold|put} in ndo_[un]init methods")
Fixes: 40cb881b5aaa ("ip6_vti: proper dev_{hold|put} in ndo_[un]init methods")
Fixes: 7f700334be9a ("ip6_gre: proper dev_{hold|put} in ndo_[un]init methods")
Signed-off-by: Eric Dumazet <[email protected]>
Reported-by: syzbot <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
After adopting CONFIG_PCPU_DEV_REFCNT=n option, syzbot was able to trigger
a warning [1]
Issue here is that:
- all dev_put() should be paired with a corresponding prior dev_hold().
- A driver doing a dev_put() in its ndo_uninit() MUST also
do a dev_hold() in its ndo_init(), only when ndo_init()
is returning 0.
Otherwise, register_netdevice() would call ndo_uninit()
in its error path and release a refcount too soon.
Therefore, we need to move dev_hold() call from
vti6_tnl_create2() to vti6_dev_init_gen()
[1]
WARNING: CPU: 0 PID: 15951 at lib/refcount.c:31
refcount_warn_saturate+0xbf/0x1e0 lib/refcount.c:31
Modules linked in:
CPU: 0 PID: 15951 Comm: syz-executor.3 Not tainted 5.12.0-rc4-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS
Google 01/01/2011
RIP: 0010:refcount_warn_saturate+0xbf/0x1e0 lib/refcount.c:31
Code: 1d 6a 5a e8 09 31 ff 89 de e8 8d 1a ab fd 84 db 75 e0 e8 d4 13 ab fd
48 c7 c7 a0 e1 c1 89 c6 05 4a 5a e8 09 01 e8 2e 36 fb 04 <0f> 0b eb c4 e8 b8
13 ab fd 0f b6 1d 39 5a e8 09 31 ff 89 de e8 58
RSP: 0018:ffffc90001eaef28 EFLAGS: 00010282
RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000
RDX: 0000000000040000 RSI: ffffffff815c51f5 RDI: fffff520003d5dd7
RBP: 0000000000000004 R08: 0000000000000000 R09: 0000000000000000
R10: ffffffff815bdf8e R11: 0000000000000000 R12: ffff88801bb1c568
R13: ffff88801f69e800 R14: 00000000ffffffff R15: ffff888050889d40
FS: 00007fc79314e700(0000) GS:ffff8880b9c00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f1c1ff47108 CR3: 0000000020fd5000 CR4: 00000000001506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
__refcount_dec include/linux/refcount.h:344 [inline]
refcount_dec include/linux/refcount.h:359 [inline]
dev_put include/linux/netdevice.h:4135 [inline]
vti6_dev_uninit+0x31a/0x360 net/ipv6/ip6_vti.c:297
register_netdevice+0xadf/0x1500 net/core/dev.c:10308
vti6_tnl_create2+0x1b5/0x400 net/ipv6/ip6_vti.c:190
vti6_newlink+0x9d/0xd0 net/ipv6/ip6_vti.c:1020
__rtnl_newlink+0x1062/0x1710 net/core/rtnetlink.c:3443
rtnl_newlink+0x64/0xa0 net/core/rtnetlink.c:3491
rtnetlink_rcv_msg+0x44e/0xad0 net/core/rtnetlink.c:5553
netlink_rcv_skb+0x153/0x420 net/netlink/af_netlink.c:2502
netlink_unicast_kernel net/netlink/af_netlink.c:1312 [inline]
netlink_unicast+0x533/0x7d0 net/netlink/af_netlink.c:1338
netlink_sendmsg+0x856/0xd90 net/netlink/af_netlink.c:1927
sock_sendmsg_nosec net/socket.c:654 [inline]
sock_sendmsg+0xcf/0x120 net/socket.c:674
____sys_sendmsg+0x331/0x810 net/socket.c:2350
___sys_sendmsg+0xf3/0x170 net/socket.c:2404
__sys_sendmmsg+0x195/0x470 net/socket.c:2490
__do_sys_sendmmsg net/socket.c:2519 [inline]
__se_sys_sendmmsg net/socket.c:2516 [inline]
__x64_sys_sendmmsg+0x99/0x100 net/socket.c:2516
Signed-off-by: Eric Dumazet <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/ipv6/ip6_vti.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/net/ipv6/ip6_vti.c b/net/ipv6/ip6_vti.c
index cc6180e08a4f..01ddb0f70c57 100644
--- a/net/ipv6/ip6_vti.c
+++ b/net/ipv6/ip6_vti.c
@@ -192,7 +192,6 @@ static int vti6_tnl_create2(struct net_device *dev)
strcpy(t->parms.name, dev->name);
- dev_hold(dev);
vti6_tnl_link(ip6n, t);
return 0;
@@ -921,6 +920,7 @@ static inline int vti6_dev_init_gen(struct net_device
*dev)
dev->tstats = netdev_alloc_pcpu_stats(struct pcpu_sw_netstats);
if (!dev->tstats)
return -ENOMEM;
+ dev_hold(dev);
return 0;
}
On Thu, May 20, 2021 at 06:16:11AM +0000, Rantala, Tommi T. (Nokia - FI/Espoo) wrote:
> On Mon, 2021-05-17 at 16:01 +0200, Greg Kroah-Hartman wrote:
> From: Eric Dumazet <[email protected]>
>
> [ Upstream commit 40cb881b5aaa0b69a7d93dec8440d5c62dae299f ]
>
> Hi Greg,
>
> There's fixup to this commit, hit the "unregister_netdevice" problems in 5.4.120
> while running kernel selftests.
>
> (also check the "Fixes:" tags, I think not all of them were yet included in 5.4.y)
>
>
> commit 0d7a7b2014b1a499a0fe24c9f3063d7856b5aaaf
> Author: Eric Dumazet <[email protected]>
> Date: Wed Mar 31 14:38:11 2021 -0700
>
> ipv6: remove extra dev_hold() for fallback tunnels
>
> My previous commits added a dev_hold() in tunnels ndo_init(),
> but forgot to remove it from special functions setting up fallback tunnels.
>
> Fallback tunnels do call their respective ndo_init()
>
> This leads to various reports like :
>
> unregister_netdevice: waiting for ip6gre0 to become free. Usage count = 2
>
> Fixes: 48bb5697269a ("ip6_tunnel: sit: proper dev_{hold|put} in ndo_[un]init methods")
> Fixes: 6289a98f0817 ("sit: proper dev_{hold|put} in ndo_[un]init methods")
> Fixes: 40cb881b5aaa ("ip6_vti: proper dev_{hold|put} in ndo_[un]init methods")
> Fixes: 7f700334be9a ("ip6_gre: proper dev_{hold|put} in ndo_[un]init methods")
> Signed-off-by: Eric Dumazet <[email protected]>
> Reported-by: syzbot <[email protected]>
> Signed-off-by: David S. Miller <[email protected]>
>
>
>
> After adopting CONFIG_PCPU_DEV_REFCNT=n option, syzbot was able to trigger
> a warning [1]
>
> Issue here is that:
>
> - all dev_put() should be paired with a corresponding prior dev_hold().
>
> - A driver doing a dev_put() in its ndo_uninit() MUST also
> ? do a dev_hold() in its ndo_init(), only when ndo_init()
> ? is returning 0.
>
> Otherwise, register_netdevice() would call ndo_uninit()
> in its error path and release a refcount too soon.
>
> Therefore, we need to move dev_hold() call from
> vti6_tnl_create2() to vti6_dev_init_gen()
>
> [1]
> WARNING: CPU: 0 PID: 15951 at lib/refcount.c:31
> refcount_warn_saturate+0xbf/0x1e0 lib/refcount.c:31
> Modules linked in:
> CPU: 0 PID: 15951 Comm: syz-executor.3 Not tainted 5.12.0-rc4-syzkaller #0
> Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS
> Google 01/01/2011
> RIP: 0010:refcount_warn_saturate+0xbf/0x1e0 lib/refcount.c:31
> Code: 1d 6a 5a e8 09 31 ff 89 de e8 8d 1a ab fd 84 db 75 e0 e8 d4 13 ab fd
> 48 c7 c7 a0 e1 c1 89 c6 05 4a 5a e8 09 01 e8 2e 36 fb 04 <0f> 0b eb c4 e8 b8
> 13 ab fd 0f b6 1d 39 5a e8 09 31 ff 89 de e8 58
> RSP: 0018:ffffc90001eaef28 EFLAGS: 00010282
> RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000
> RDX: 0000000000040000 RSI: ffffffff815c51f5 RDI: fffff520003d5dd7
> RBP: 0000000000000004 R08: 0000000000000000 R09: 0000000000000000
> R10: ffffffff815bdf8e R11: 0000000000000000 R12: ffff88801bb1c568
> R13: ffff88801f69e800 R14: 00000000ffffffff R15: ffff888050889d40
> FS:? 00007fc79314e700(0000) GS:ffff8880b9c00000(0000) knlGS:0000000000000000
> CS:? 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
> CR2: 00007f1c1ff47108 CR3: 0000000020fd5000 CR4: 00000000001506f0
> DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
> DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
> Call Trace:
> ?__refcount_dec include/linux/refcount.h:344 [inline]
> ?refcount_dec include/linux/refcount.h:359 [inline]
> ?dev_put include/linux/netdevice.h:4135 [inline]
> ?vti6_dev_uninit+0x31a/0x360 net/ipv6/ip6_vti.c:297
> ?register_netdevice+0xadf/0x1500 net/core/dev.c:10308
> ?vti6_tnl_create2+0x1b5/0x400 net/ipv6/ip6_vti.c:190
> ?vti6_newlink+0x9d/0xd0 net/ipv6/ip6_vti.c:1020
> ?__rtnl_newlink+0x1062/0x1710 net/core/rtnetlink.c:3443
> ?rtnl_newlink+0x64/0xa0 net/core/rtnetlink.c:3491
> ?rtnetlink_rcv_msg+0x44e/0xad0 net/core/rtnetlink.c:5553
> ?netlink_rcv_skb+0x153/0x420 net/netlink/af_netlink.c:2502
> ?netlink_unicast_kernel net/netlink/af_netlink.c:1312 [inline]
> ?netlink_unicast+0x533/0x7d0 net/netlink/af_netlink.c:1338
> ?netlink_sendmsg+0x856/0xd90 net/netlink/af_netlink.c:1927
> ?sock_sendmsg_nosec net/socket.c:654 [inline]
> ?sock_sendmsg+0xcf/0x120 net/socket.c:674
> ?____sys_sendmsg+0x331/0x810 net/socket.c:2350
> ?___sys_sendmsg+0xf3/0x170 net/socket.c:2404
> ?__sys_sendmmsg+0x195/0x470 net/socket.c:2490
> ?__do_sys_sendmmsg net/socket.c:2519 [inline]
> ?__se_sys_sendmmsg net/socket.c:2516 [inline]
> ?__x64_sys_sendmmsg+0x99/0x100 net/socket.c:2516
>
> Signed-off-by: Eric Dumazet <[email protected]>
> Signed-off-by: David S. Miller <[email protected]>
> Signed-off-by: Sasha Levin <[email protected]>
> ---
> ?net/ipv6/ip6_vti.c | 2 +-
> ?1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/net/ipv6/ip6_vti.c b/net/ipv6/ip6_vti.c
> index cc6180e08a4f..01ddb0f70c57 100644
> --- a/net/ipv6/ip6_vti.c
> +++ b/net/ipv6/ip6_vti.c
> @@ -192,7 +192,6 @@ static int vti6_tnl_create2(struct net_device *dev)
> ?
> ????????strcpy(t->parms.name, dev->name);
> ?
> -???????dev_hold(dev);
> ????????vti6_tnl_link(ip6n, t);
> ?
> ????????return 0;
> @@ -921,6 +920,7 @@ static inline int vti6_dev_init_gen(struct net_device
> *dev)
> ????????dev->tstats = netdev_alloc_pcpu_stats(struct pcpu_sw_netstats);
> ????????if (!dev->tstats)
> ????????????????return -ENOMEM;
> +???????dev_hold(dev);
> ????????return 0;
> ?}
> ?
I do not understand, what needs to be done here?
greg k-h
> I do not understand, what needs to be done here?
Sorry, email formatting got somehow messed up.
Please cherry-pick this to 5.4.y:
commit 0d7a7b2014b1a499a0fe24c9f3063d7856b5aaaf
Author: Eric Dumazet <[email protected]>
Date: Wed Mar 31 14:38:11 2021 -0700
ipv6: remove extra dev_hold() for fallback tunnels
And these:
Fixes: 48bb5697269a ("ip6_tunnel: sit: proper dev_{hold|put} in
ndo_[un]init methods")
Fixes: 6289a98f0817 ("sit: proper dev_{hold|put} in ndo_[un]init
methods")
Fixes: 7f700334be9a ("ip6_gre: proper dev_{hold|put} in ndo_[un]init
methods")
-Tommi
On Thu, May 20, 2021 at 07:55:49AM +0000, Rantala, Tommi T. (Nokia - FI/Espoo) wrote:
> > I do not understand, what needs to be done here?
>
> Sorry, email formatting got somehow messed up.
>
> Please cherry-pick this to 5.4.y:
>
> commit 0d7a7b2014b1a499a0fe24c9f3063d7856b5aaaf
> Author: Eric Dumazet <[email protected]>
> Date: Wed Mar 31 14:38:11 2021 -0700
>
> ipv6: remove extra dev_hold() for fallback tunnels
>
>
> And these:
>
> Fixes: 48bb5697269a ("ip6_tunnel: sit: proper dev_{hold|put} in
> ndo_[un]init methods")
> Fixes: 6289a98f0817 ("sit: proper dev_{hold|put} in ndo_[un]init
> methods")
> Fixes: 7f700334be9a ("ip6_gre: proper dev_{hold|put} in ndo_[un]init
> methods")
Ah, that makes sense. Tricky as the "Fixes:" tag for those other
commits were not backported because they pointed to a feature added to
debug these issues :)
now queued up.
greg k-h