From: leoliu-oc <[email protected]>
HEST PCIE AER error source information describes the Uncorrectable Error
Severity, CorrectableError Mask and other aer register's value to write to the
bridge's Correctable Error Mask register.
leoliu-oc (5):
ACPI/APEI: Add apei_hest_parse_aer()
ACPI/APEI: remove static from apei_hest_parse()
ACPI/PCI: Add AER bits #defines for PCIE/PCI-X bridges
ACPI/PCI: Add pci_acpi_program_hest_aer_params()
ACPI/PCI: config pcie devices's aer register
drivers/acpi/apei/hest.c | 121 +++++++++++++++++++++++++++++++++-
drivers/pci/pci-acpi.c | 92 ++++++++++++++++++++++++++
drivers/pci/pci.h | 5 ++
drivers/pci/probe.c | 1 +
include/acpi/actbl1.h | 69 +++++++++++++++++++
include/acpi/apei.h | 9 +++
include/uapi/linux/pci_regs.h | 5 ++
7 files changed, 300 insertions(+), 2 deletions(-)
--
2.20.1
On 10/26/22 8:14 PM, LeoLiu-oc wrote:
> From: leoliu-oc <[email protected]>
>
> HEST PCIE AER error source information describes the Uncorrectable Error
> Severity, CorrectableError Mask and other aer register's value to write to the
/s/CorrectableError/Correctable Error
/s/aer/AER
> bridge's Correctable Error Mask register.
Can you add spec reference?
>
> leoliu-oc (5):
> ACPI/APEI: Add apei_hest_parse_aer()
> ACPI/APEI: remove static from apei_hest_parse()
> ACPI/PCI: Add AER bits #defines for PCIE/PCI-X bridges
> ACPI/PCI: Add pci_acpi_program_hest_aer_params()
> ACPI/PCI: config pcie devices's aer register
>
> drivers/acpi/apei/hest.c | 121 +++++++++++++++++++++++++++++++++-
> drivers/pci/pci-acpi.c | 92 ++++++++++++++++++++++++++
> drivers/pci/pci.h | 5 ++
> drivers/pci/probe.c | 1 +
> include/acpi/actbl1.h | 69 +++++++++++++++++++
> include/acpi/apei.h | 9 +++
> include/uapi/linux/pci_regs.h | 5 ++
> 7 files changed, 300 insertions(+), 2 deletions(-)
>
--
Sathyanarayanan Kuppuswamy
Linux Kernel Developer
On Thu, Oct 27, 2022 at 11:14:58AM +0800, LeoLiu-oc wrote:
> From: leoliu-oc <[email protected]>
>
> HEST PCIE AER error source information describes the Uncorrectable Error
> Severity, CorrectableError Mask and other aer register's value to write to the
> bridge's Correctable Error Mask register.
I guess the point is to extract register values from HEST PCI Express
AER structures (ACPI r6.5, sec 18.3.2.4, etc.) and program them into
AER Capabilities?
> leoliu-oc (5):
> ACPI/APEI: Add apei_hest_parse_aer()
> ACPI/APEI: remove static from apei_hest_parse()
> ACPI/PCI: Add AER bits #defines for PCIE/PCI-X bridges
> ACPI/PCI: Add pci_acpi_program_hest_aer_params()
> ACPI/PCI: config pcie devices's aer register
If/when you repost this, it would be nice if the patches ([1/5],
[2/5], etc) were responses to the cover letter ([0/5]). Since they're
not responses, b4 doesn't know they're connected and can't grab the
whole series at once.
Also capitalize the subject lines consistently and s/PCIE/PCIe/ and
s/pcie/PCIe/ and s/aer/AER/, e.g.,
ACPI/APEI: Add apei_hest_parse_aer()
ACPI/APEI: Remove static from apei_hest_parse()
PCI: Add AER #defines for PCIe/PCI-X bridges
ACPI/PCI: Add pci_acpi_program_hest_aer_params()
ACPI/PCI: Configure devices AER registers based on HEST
> drivers/acpi/apei/hest.c | 121 +++++++++++++++++++++++++++++++++-
> drivers/pci/pci-acpi.c | 92 ++++++++++++++++++++++++++
> drivers/pci/pci.h | 5 ++
> drivers/pci/probe.c | 1 +
> include/acpi/actbl1.h | 69 +++++++++++++++++++
> include/acpi/apei.h | 9 +++
> include/uapi/linux/pci_regs.h | 5 ++
> 7 files changed, 300 insertions(+), 2 deletions(-)
>
> --
> 2.20.1
>
在 2022/10/28 6:09, Bjorn Helgaas 写道:
> On Thu, Oct 27, 2022 at 11:14:58AM +0800, LeoLiu-oc wrote:
>> From: leoliu-oc <[email protected]>
>>
>> HEST PCIE AER error source information describes the Uncorrectable Error
>> Severity, CorrectableError Mask and other aer register's value to write to the
>> bridge's Correctable Error Mask register.
>
> I guess the point is to extract register values from HEST PCI Express
> AER structures (ACPI r6.5, sec 18.3.2.4, etc.) and program them into
> AER Capabilities?
>
Yes, the purpose of the patch sets is to extract register values from
HEST PCI Express AER structures and program them into AER Capabilities
Thanks
leoliu-oc
>> leoliu-oc (5):
>> ACPI/APEI: Add apei_hest_parse_aer()
>> ACPI/APEI: remove static from apei_hest_parse()
>> ACPI/PCI: Add AER bits #defines for PCIE/PCI-X bridges
>> ACPI/PCI: Add pci_acpi_program_hest_aer_params()
>> ACPI/PCI: config pcie devices's aer register
>
> If/when you repost this, it would be nice if the patches ([1/5],
> [2/5], etc) were responses to the cover letter ([0/5]). Since they're
> not responses, b4 doesn't know they're connected and can't grab the
> whole series at once.
>
> Also capitalize the subject lines consistently and s/PCIE/PCIe/ and
> s/pcie/PCIe/ and s/aer/AER/, e.g., >
> ACPI/APEI: Add apei_hest_parse_aer()
> ACPI/APEI: Remove static from apei_hest_parse()
> PCI: Add AER #defines for PCIe/PCI-X bridges
> ACPI/PCI: Add pci_acpi_program_hest_aer_params()
> ACPI/PCI: Configure devices AER registers based on HEST
Got it. I will modify this in the next version patch set.
Thanks
leoliu-oc
>
>> drivers/acpi/apei/hest.c | 121 +++++++++++++++++++++++++++++++++-
>> drivers/pci/pci-acpi.c | 92 ++++++++++++++++++++++++++
>> drivers/pci/pci.h | 5 ++
>> drivers/pci/probe.c | 1 +
>> include/acpi/actbl1.h | 69 +++++++++++++++++++
>> include/acpi/apei.h | 9 +++
>> include/uapi/linux/pci_regs.h | 5 ++
>> 7 files changed, 300 insertions(+), 2 deletions(-)
>>
>> --
>> 2.20.1
>>
在 2022/10/27 12:17, Sathyanarayanan Kuppuswamy 写道:
>
>
> On 10/26/22 8:14 PM, LeoLiu-oc wrote:
>> From: leoliu-oc <[email protected]>
>>
>> HEST PCIE AER error source information describes the Uncorrectable Error
>> Severity, CorrectableError Mask and other aer register's value to write to the
>
> /s/CorrectableError/Correctable Error
> /s/aer/AER
Got it. I will modify this in next version patch set.
Thanks
leoliu-oc
>
>> bridge's Correctable Error Mask register.
>
> Can you add spec reference?
>
Please refer to Section 18.3.2 ACPI Error Source of acpi spec v6.3.
Links to the online versions of ACPI Spec 6.3 is
https://uefi.org/htmlspecs/ACPI_Spec_6_4_html/18_ACPI_Platform_Error_Interfaces/error-source-discovery.html#acpi-error-source.
Section 18.3.2.4 describes PCI Express Root Port AER Structure, section
18.3.2.5 describes PCI Express Device AER Structure, section 18.3.2.6
describes PCI Express/PCI-X Bridge AER Structure.
Thanks
leoliu-oc
>>
>> leoliu-oc (5):
>> ACPI/APEI: Add apei_hest_parse_aer()
>> ACPI/APEI: remove static from apei_hest_parse()
>> ACPI/PCI: Add AER bits #defines for PCIE/PCI-X bridges
>> ACPI/PCI: Add pci_acpi_program_hest_aer_params()
>> ACPI/PCI: config pcie devices's aer register
>>
>> drivers/acpi/apei/hest.c | 121 +++++++++++++++++++++++++++++++++-
>> drivers/pci/pci-acpi.c | 92 ++++++++++++++++++++++++++
>> drivers/pci/pci.h | 5 ++
>> drivers/pci/probe.c | 1 +
>> include/acpi/actbl1.h | 69 +++++++++++++++++++
>> include/acpi/apei.h | 9 +++
>> include/uapi/linux/pci_regs.h | 5 ++
>> 7 files changed, 300 insertions(+), 2 deletions(-)
>>
>
On Fri, Oct 28, 2022 at 07:19:25PM +0800, LeoLiuoc wrote:
> 在 2022/10/27 12:17, Sathyanarayanan Kuppuswamy 写道:
> > On 10/26/22 8:14 PM, LeoLiu-oc wrote:
> > Can you add spec reference?
> >
> Please refer to Section 18.3.2 ACPI Error Source of acpi spec v6.3. Links to
> the online versions of ACPI Spec 6.3 is
> https://uefi.org/htmlspecs/ACPI_Spec_6_4_html/18_ACPI_Platform_Error_Interfaces/error-source-discovery.html#acpi-error-source.
>
> Section 18.3.2.4 describes PCI Express Root Port AER Structure, section
> 18.3.2.5 describes PCI Express Device AER Structure, section 18.3.2.6
> describes PCI Express/PCI-X Bridge AER Structure.
Thanks. It's OK to have the spec references in the email thread, but
the real point is that they should be in the commit log and, when it
makes sense, in code comments.
Cite the most recent spec version when you can. In this case, I think
it is ACPI r6.5.
Personally I don't really care for URL references because they tend to
get stale over time as websites are reorganized and domains change.
Something like "ACPI r6.5, sec 18.3.2.4" is unambiguous and will
remain usable forever.
Bjorn
在 2022/10/28 23:15, Bjorn Helgaas 写道:
> On Fri, Oct 28, 2022 at 07:19:25PM +0800, LeoLiuoc wrote:
>> 在 2022/10/27 12:17, Sathyanarayanan Kuppuswamy 写道:
>>> On 10/26/22 8:14 PM, LeoLiu-oc wrote:
>
>>> Can you add spec reference?
>>>
>> Please refer to Section 18.3.2 ACPI Error Source of acpi spec v6.3. Links to
>> the online versions of ACPI Spec 6.3 is
>> https://uefi.org/htmlspecs/ACPI_Spec_6_4_html/18_ACPI_Platform_Error_Interfaces/error-source-discovery.html#acpi-error-source.
>>
>> Section 18.3.2.4 describes PCI Express Root Port AER Structure, section
>> 18.3.2.5 describes PCI Express Device AER Structure, section 18.3.2.6
>> describes PCI Express/PCI-X Bridge AER Structure.
>
> Thanks. It's OK to have the spec references in the email thread, but
> the real point is that they should be in the commit log and, when it
> makes sense, in code comments.
>
> Cite the most recent spec version when you can. In this case, I think
> it is ACPI r6.5.
>
> Personally I don't really care for URL references because they tend to
> get stale over time as websites are reorganized and domains change.
> Something like "ACPI r6.5, sec 18.3.2.4" is unambiguous and will
> remain usable forever.
>
> Bjorn
Got it. Thanks for your advice. This will be modified in the next version.
Thanks
leoliu-oc