2023-08-11 13:23:11

by Arnd Bergmann

Subject: [PATCH] platform/x86/siemens: simatic-ipc: fix nonsensical condition

From: Arnd Bergmann <[email protected]>

The condition checking for a constant SIMATIC_IPC_DEVICE_BX_59A value
clearly makes no sense, as clang warns:

drivers/platform/x86/siemens/simatic-ipc.c:132:42: error: use of logical '||' with constant operand [-Werror,-Wconstant-logical-operand]
if (ledmode == SIMATIC_IPC_DEVICE_227G || SIMATIC_IPC_DEVICE_BX_59A)
^ ~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/platform/x86/siemens/simatic-ipc-batt.c:197:49: error: use of logical '||' with constant operand [-Werror,-Wconstant-logical-operand]
if (priv.devmode == SIMATIC_IPC_DEVICE_BX_21A || SIMATIC_IPC_DEVICE_BX_59A)
^ ~~~~~~~~~~~~~~~~~~~~~~~~~

Most likely, this was meant to check ledmode to be one of the two values,
so change it to that.

Fixes: b8af77951941e ("platform/x86/siemens: simatic-ipc: add new models BX-56A/BX-59A")
Fixes: c56beff203754 ("platform/x86/siemens: simatic-ipc-batt: add support for module BX-59A")
Signed-off-by: Arnd Bergmann <[email protected]>
---
drivers/platform/x86/siemens/simatic-ipc-batt.c | 3 ++-
drivers/platform/x86/siemens/simatic-ipc.c | 3 ++-
2 files changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/platform/x86/siemens/simatic-ipc-batt.c b/drivers/platform/x86/siemens/simatic-ipc-batt.c
index d66b9969234bf..e6c12c52843ca 100644
--- a/drivers/platform/x86/siemens/simatic-ipc-batt.c
+++ b/drivers/platform/x86/siemens/simatic-ipc-batt.c
@@ -194,7 +194,8 @@ int simatic_ipc_batt_probe(struct platform_device *pdev, struct gpiod_lookup_tab

if (table->table[2].key) {
flags = GPIOD_OUT_HIGH;
- if (priv.devmode == SIMATIC_IPC_DEVICE_BX_21A || SIMATIC_IPC_DEVICE_BX_59A)
+ if (priv.devmode == SIMATIC_IPC_DEVICE_BX_21A ||
+ priv.devmode == SIMATIC_IPC_DEVICE_BX_59A)
flags = GPIOD_OUT_LOW;
priv.gpios[2] = devm_gpiod_get_index(dev, "CMOSBattery meter", 2, flags);
if (IS_ERR(priv.gpios[2])) {
diff --git a/drivers/platform/x86/siemens/simatic-ipc.c b/drivers/platform/x86/siemens/simatic-ipc.c
index 02c540cf40702..e11d28ffac604 100644
--- a/drivers/platform/x86/siemens/simatic-ipc.c
+++ b/drivers/platform/x86/siemens/simatic-ipc.c
@@ -129,7 +129,8 @@ static int register_platform_devices(u32 station_id)
pdevname = KBUILD_MODNAME "_leds";
if (ledmode == SIMATIC_IPC_DEVICE_127E)
pdevname = KBUILD_MODNAME "_leds_gpio_apollolake";
- if (ledmode == SIMATIC_IPC_DEVICE_227G || SIMATIC_IPC_DEVICE_BX_59A)
+ if (ledmode == SIMATIC_IPC_DEVICE_227G ||
+ ledmode == SIMATIC_IPC_DEVICE_BX_59A)
pdevname = KBUILD_MODNAME "_leds_gpio_f7188x";
if (ledmode == SIMATIC_IPC_DEVICE_BX_21A)
pdevname = KBUILD_MODNAME "_leds_gpio_elkhartlake";
--
2.39.2

2023-08-11 14:44:28

by Ilpo Järvinen

Subject: Re: [PATCH] platform/x86/siemens: simatic-ipc: fix nonsensical condition

On Fri, 11 Aug 2023, Arnd Bergmann wrote:

> From: Arnd Bergmann <[email protected]>
>
> The condition checking for a constant SIMATIC_IPC_DEVICE_BX_59A value
> clearly makes no sense, as clang warns:
>
> drivers/platform/x86/siemens/simatic-ipc.c:132:42: error: use of logical '||' with constant operand [-Werror,-Wconstant-logical-operand]
> if (ledmode == SIMATIC_IPC_DEVICE_227G || SIMATIC_IPC_DEVICE_BX_59A)
> ^ ~~~~~~~~~~~~~~~~~~~~~~~~~
> drivers/platform/x86/siemens/simatic-ipc-batt.c:197:49: error: use of logical '||' with constant operand [-Werror,-Wconstant-logical-operand]
> if (priv.devmode == SIMATIC_IPC_DEVICE_BX_21A || SIMATIC_IPC_DEVICE_BX_59A)
> ^ ~~~~~~~~~~~~~~~~~~~~~~~~~
>
> Most likely, this was meant to check ledmode to be one of the two values,
> so change it to that.
>
> Fixes: b8af77951941e ("platform/x86/siemens: simatic-ipc: add new models BX-56A/BX-59A")
> Fixes: c56beff203754 ("platform/x86/siemens: simatic-ipc-batt: add support for module BX-59A")
> Signed-off-by: Arnd Bergmann <[email protected]>
> ---
> drivers/platform/x86/siemens/simatic-ipc-batt.c | 3 ++-
> drivers/platform/x86/siemens/simatic-ipc.c | 3 ++-
> 2 files changed, 4 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/platform/x86/siemens/simatic-ipc-batt.c b/drivers/platform/x86/siemens/simatic-ipc-batt.c
> index d66b9969234bf..e6c12c52843ca 100644
> --- a/drivers/platform/x86/siemens/simatic-ipc-batt.c
> +++ b/drivers/platform/x86/siemens/simatic-ipc-batt.c
> @@ -194,7 +194,8 @@ int simatic_ipc_batt_probe(struct platform_device *pdev, struct gpiod_lookup_tab
>
> if (table->table[2].key) {
> flags = GPIOD_OUT_HIGH;
> - if (priv.devmode == SIMATIC_IPC_DEVICE_BX_21A || SIMATIC_IPC_DEVICE_BX_59A)
> + if (priv.devmode == SIMATIC_IPC_DEVICE_BX_21A ||
> + priv.devmode == SIMATIC_IPC_DEVICE_BX_59A)
> flags = GPIOD_OUT_LOW;
> priv.gpios[2] = devm_gpiod_get_index(dev, "CMOSBattery meter", 2, flags);
> if (IS_ERR(priv.gpios[2])) {
> diff --git a/drivers/platform/x86/siemens/simatic-ipc.c b/drivers/platform/x86/siemens/simatic-ipc.c
> index 02c540cf40702..e11d28ffac604 100644
> --- a/drivers/platform/x86/siemens/simatic-ipc.c
> +++ b/drivers/platform/x86/siemens/simatic-ipc.c
> @@ -129,7 +129,8 @@ static int register_platform_devices(u32 station_id)
> pdevname = KBUILD_MODNAME "_leds";
> if (ledmode == SIMATIC_IPC_DEVICE_127E)
> pdevname = KBUILD_MODNAME "_leds_gpio_apollolake";
> - if (ledmode == SIMATIC_IPC_DEVICE_227G || SIMATIC_IPC_DEVICE_BX_59A)
> + if (ledmode == SIMATIC_IPC_DEVICE_227G ||
> + ledmode == SIMATIC_IPC_DEVICE_BX_59A)
> pdevname = KBUILD_MODNAME "_leds_gpio_f7188x";
> if (ledmode == SIMATIC_IPC_DEVICE_BX_21A)
> pdevname = KBUILD_MODNAME "_leds_gpio_elkhartlake";

Thank you for the patch but these are already fixed by commits:

7abf253afa5c ("platform/x86/siemens: simatic-ipc-batt: fix logical error for BX-59A")
b01c1e022f7f ("platform/x86/siemens: simatic-ipc: fix logical error for BX-59A")


--
i.

2023-08-11 15:42:02

by Arnd Bergmann

Subject: Re: [PATCH] platform/x86/siemens: simatic-ipc: fix nonsensical condition

On Fri, Aug 11, 2023, at 15:17, Ilpo Järvinen wrote:
> On Fri, 11 Aug 2023, Arnd Bergmann wrote:
>
>> From: Arnd Bergmann <[email protected]>
>>
>> The condition checking for a constant SIMATIC_IPC_DEVICE_BX_59A value
>> clearly makes no sense, as clang warns:
>>
>> drivers/platform/x86/siemens/simatic-ipc.c:132:42: error: use of logical '||' with constant operand [-Werror,-Wconstant-logical-operand]
>> if (ledmode == SIMATIC_IPC_DEVICE_227G || SIMATIC_IPC_DEVICE_BX_59A)
>> ^ ~~~~~~~~~~~~~~~~~~~~~~~~~
>> drivers/platform/x86/siemens/simatic-ipc-batt.c:197:49: error: use of logical '||' with constant operand [-Werror,-Wconstant-logical-operand]
>> if (priv.devmode == SIMATIC_IPC_DEVICE_BX_21A || SIMATIC_IPC_DEVICE_BX_59A)
>> ^ ~~~~~~~~~~~~~~~~~~~~~~~~~
>>
>> Most likely, this was meant to check ledmode to be one of the two values,
>> so change it to that.
>>
>> Fixes: b8af77951941e ("platform/x86/siemens: simatic-ipc: add new models BX-56A/BX-59A")
>> Fixes: c56beff203754 ("platform/x86/siemens: simatic-ipc-batt: add support for module BX-59A")
>> Signed-off-by: Arnd Bergmann <[email protected]>

Ok, I see. I missed those as there is hasn't been a new linux-next in
a few days.

I suppose this one is also fixed then?

WARNING: unmet direct dependencies detected for P2SB
Depends on [n]: PCI [=n] && X86 [=y]
Selected by [m]:
- SIEMENS_SIMATIC_IPC_WDT [=m] && WATCHDOG [=y] && SIEMENS_SIMATIC_IPC [=y]
drivers/platform/x86/p2sb.c:68:9: error: call to undeclared function 'pci_scan_single_device'; ISO C99 and later do not support implicit function declarations [-Wimplicit-function-declaration]

Arnd

2023-08-13 13:43:10

by Hans de Goede

Subject: Re: [PATCH] platform/x86/siemens: simatic-ipc: fix nonsensical condition

Hi,

On 8/11/23 17:02, Arnd Bergmann wrote:
> On Fri, Aug 11, 2023, at 15:17, Ilpo Järvinen wrote:
>> On Fri, 11 Aug 2023, Arnd Bergmann wrote:
>>
>>> From: Arnd Bergmann <[email protected]>
>>>
>>> The condition checking for a constant SIMATIC_IPC_DEVICE_BX_59A value
>>> clearly makes no sense, as clang warns:
>>>
>>> drivers/platform/x86/siemens/simatic-ipc.c:132:42: error: use of logical '||' with constant operand [-Werror,-Wconstant-logical-operand]
>>> if (ledmode == SIMATIC_IPC_DEVICE_227G || SIMATIC_IPC_DEVICE_BX_59A)
>>> ^ ~~~~~~~~~~~~~~~~~~~~~~~~~
>>> drivers/platform/x86/siemens/simatic-ipc-batt.c:197:49: error: use of logical '||' with constant operand [-Werror,-Wconstant-logical-operand]
>>> if (priv.devmode == SIMATIC_IPC_DEVICE_BX_21A || SIMATIC_IPC_DEVICE_BX_59A)
>>> ^ ~~~~~~~~~~~~~~~~~~~~~~~~~
>>>
>>> Most likely, this was meant to check ledmode to be one of the two values,
>>> so change it to that.
>>>
>>> Fixes: b8af77951941e ("platform/x86/siemens: simatic-ipc: add new models BX-56A/BX-59A")
>>> Fixes: c56beff203754 ("platform/x86/siemens: simatic-ipc-batt: add support for module BX-59A")
>>> Signed-off-by: Arnd Bergmann <[email protected]>
>
> Ok, I see. I missed those as there is hasn't been a new linux-next in
> a few days.
>
> I suppose this one is also fixed then?
>
> WARNING: unmet direct dependencies detected for P2SB
> Depends on [n]: PCI [=n] && X86 [=y]
> Selected by [m]:
> - SIEMENS_SIMATIC_IPC_WDT [=m] && WATCHDOG [=y] && SIEMENS_SIMATIC_IPC [=y]
> drivers/platform/x86/p2sb.c:68:9: error: call to undeclared function 'pci_scan_single_device'; ISO C99 and later do not support implicit function declarations [-Wimplicit-function-declaration]

No that one has not been fixed yet. This is the first time I've heard of this one. It seems to not have been caught by the LKP bot.

Regards,

Hans