Updates the device tree to support some features on Ampere's
Mt.Mitchell BMC.
Chanh Nguyen (4):
ARM: dts: aspeed: mtmitchell: Enable the BMC UART8 and UART9
ARM: dts: aspeed: mtmitchell: Add I2C Fan
ARM: dts: aspeed: mtmitchell: Update ADC sensors for Mt.Mitchell DVT
systems
ARM: dts: aspeed: mtmitchell: Add MCTP
.../boot/dts/aspeed-bmc-ampere-mtmitchell.dts | 138 ++++++++++++------
1 file changed, 97 insertions(+), 41 deletions(-)
--
2.17.1
The BMC UART8 and UART9 were connected to the Secpro and Mpro console
of socket S1 on the Mt.Mitchell system.
Signed-off-by: Chanh Nguyen <[email protected]>
---
arch/arm/boot/dts/aspeed-bmc-ampere-mtmitchell.dts | 12 ++++++++++++
1 file changed, 12 insertions(+)
diff --git a/arch/arm/boot/dts/aspeed-bmc-ampere-mtmitchell.dts b/arch/arm/boot/dts/aspeed-bmc-ampere-mtmitchell.dts
index 1e0e88465254..e79f56208b89 100644
--- a/arch/arm/boot/dts/aspeed-bmc-ampere-mtmitchell.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-ampere-mtmitchell.dts
@@ -9,6 +9,10 @@
/ {
model = "Ampere Mt.Mitchell BMC";
compatible = "ampere,mtmitchell-bmc", "aspeed,ast2600";
+ aliases {
+ serial7 = &uart8;
+ serial8 = &uart9;
+ };
chosen {
stdout-path = &uart5;
@@ -307,6 +311,14 @@
status = "okay";
};
+&uart8 {
+ status = "okay";
+};
+
+&uart9 {
+ status = "okay";
+};
+
&i2c0 {
status = "okay";
--
2.17.1
Change to use I2C ADC controller (ltc2497) for Mt.Mitchell DVT and
later hardware.
Signed-off-by: Chanh Nguyen <[email protected]>
---
.../boot/dts/aspeed-bmc-ampere-mtmitchell.dts | 107 +++++++++++-------
1 file changed, 66 insertions(+), 41 deletions(-)
diff --git a/arch/arm/boot/dts/aspeed-bmc-ampere-mtmitchell.dts b/arch/arm/boot/dts/aspeed-bmc-ampere-mtmitchell.dts
index 6455cf80da0e..0b5ea8620063 100644
--- a/arch/arm/boot/dts/aspeed-bmc-ampere-mtmitchell.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-ampere-mtmitchell.dts
@@ -65,174 +65,192 @@
adc0mux: adc0mux {
compatible = "io-channel-mux";
- io-channels = <&adc0 0>;
+ io-channels = <&adc_i2c_0 0>;
#io-channel-cells = <1>;
io-channel-names = "parent";
mux-controls = <&gpioI5mux>;
+ settle-time-us = <10000>;
channels = "s0", "s1";
};
adc1mux: adc1mux {
compatible = "io-channel-mux";
- io-channels = <&adc0 1>;
+ io-channels = <&adc_i2c_0 1>;
#io-channel-cells = <1>;
io-channel-names = "parent";
mux-controls = <&gpioI5mux>;
+ settle-time-us = <10000>;
channels = "s0", "s1";
};
adc2mux: adc2mux {
compatible = "io-channel-mux";
- io-channels = <&adc0 2>;
+ io-channels = <&adc_i2c_0 2>;
#io-channel-cells = <1>;
io-channel-names = "parent";
mux-controls = <&gpioI5mux>;
+ settle-time-us = <10000>;
channels = "s0", "s1";
};
adc3mux: adc3mux {
compatible = "io-channel-mux";
- io-channels = <&adc0 3>;
+ io-channels = <&adc_i2c_0 3>;
#io-channel-cells = <1>;
io-channel-names = "parent";
mux-controls = <&gpioI5mux>;
+ settle-time-us = <10000>;
channels = "s0", "s1";
};
adc4mux: adc4mux {
compatible = "io-channel-mux";
- io-channels = <&adc0 4>;
+ io-channels = <&adc_i2c_0 4>;
#io-channel-cells = <1>;
io-channel-names = "parent";
mux-controls = <&gpioI5mux>;
+ settle-time-us = <10000>;
channels = "s0", "s1";
};
adc5mux: adc5mux {
compatible = "io-channel-mux";
- io-channels = <&adc0 5>;
+ io-channels = <&adc_i2c_0 5>;
#io-channel-cells = <1>;
io-channel-names = "parent";
mux-controls = <&gpioI5mux>;
+ settle-time-us = <10000>;
channels = "s0", "s1";
};
adc6mux: adc6mux {
compatible = "io-channel-mux";
- io-channels = <&adc0 6>;
+ io-channels = <&adc_i2c_0 6>;
#io-channel-cells = <1>;
io-channel-names = "parent";
mux-controls = <&gpioI5mux>;
+ settle-time-us = <10000>;
channels = "s0", "s1";
};
adc7mux: adc7mux {
compatible = "io-channel-mux";
- io-channels = <&adc0 7>;
+ io-channels = <&adc_i2c_0 7>;
#io-channel-cells = <1>;
io-channel-names = "parent";
mux-controls = <&gpioI5mux>;
+ settle-time-us = <10000>;
channels = "s0", "s1";
};
adc8mux: adc8mux {
compatible = "io-channel-mux";
- io-channels = <&adc1 0>;
+ io-channels = <&adc_i2c_0 8>;
#io-channel-cells = <1>;
io-channel-names = "parent";
mux-controls = <&gpioI5mux>;
+ settle-time-us = <10000>;
channels = "s0", "s1";
};
adc9mux: adc9mux {
compatible = "io-channel-mux";
- io-channels = <&adc1 1>;
+ io-channels = <&adc_i2c_0 9>;
#io-channel-cells = <1>;
io-channel-names = "parent";
mux-controls = <&gpioI5mux>;
+ settle-time-us = <10000>;
channels = "s0", "s1";
};
adc10mux: adc10mux {
compatible = "io-channel-mux";
- io-channels = <&adc1 2>;
+ io-channels = <&adc_i2c_0 10>;
#io-channel-cells = <1>;
io-channel-names = "parent";
mux-controls = <&gpioI5mux>;
+ settle-time-us = <10000>;
channels = "s0", "s1";
};
adc11mux: adc11mux {
compatible = "io-channel-mux";
- io-channels = <&adc1 3>;
+ io-channels = <&adc_i2c_0 11>;
#io-channel-cells = <1>;
io-channel-names = "parent";
mux-controls = <&gpioI5mux>;
+ settle-time-us = <10000>;
channels = "s0", "s1";
};
adc12mux: adc12mux {
compatible = "io-channel-mux";
- io-channels = <&adc1 4>;
+ io-channels = <&adc_i2c_0 12>;
#io-channel-cells = <1>;
io-channel-names = "parent";
mux-controls = <&gpioI5mux>;
+ settle-time-us = <10000>;
channels = "s0", "s1";
};
adc13mux: adc13mux {
compatible = "io-channel-mux";
- io-channels = <&adc1 5>;
+ io-channels = <&adc_i2c_0 13>;
#io-channel-cells = <1>;
io-channel-names = "parent";
mux-controls = <&gpioI5mux>;
+ settle-time-us = <10000>;
channels = "s0", "s1";
};
adc14mux: adc14mux {
compatible = "io-channel-mux";
- io-channels = <&adc1 6>;
+ io-channels = <&adc_i2c_0 14>;
#io-channel-cells = <1>;
io-channel-names = "parent";
mux-controls = <&gpioI5mux>;
+ settle-time-us = <10000>;
channels = "s0", "s1";
};
adc15mux: adc15mux {
compatible = "io-channel-mux";
- io-channels = <&adc1 7>;
+ io-channels = <&adc_i2c_0 15>;
#io-channel-cells = <1>;
io-channel-names = "parent";
mux-controls = <&gpioI5mux>;
+ settle-time-us = <10000>;
channels = "s0", "s1";
};
iio-hwmon {
compatible = "iio-hwmon";
- io-channels = <&adc0mux 0>, <&adc0mux 1>,
- <&adc1mux 0>, <&adc1mux 1>,
- <&adc2mux 0>, <&adc2mux 1>,
- <&adc3mux 0>, <&adc3mux 1>,
- <&adc4mux 0>, <&adc4mux 1>,
- <&adc5mux 0>, <&adc5mux 1>,
- <&adc6mux 0>, <&adc6mux 1>,
- <&adc7mux 0>, <&adc7mux 1>,
- <&adc8mux 0>, <&adc8mux 1>,
- <&adc9mux 0>, <&adc9mux 1>,
- <&adc10mux 0>, <&adc10mux 1>,
- <&adc11mux 0>, <&adc11mux 1>,
- <&adc12mux 0>, <&adc12mux 1>,
- <&adc13mux 0>, <&adc13mux 1>,
- <&adc14mux 0>, <&adc14mux 1>,
- <&adc15mux 0>, <&adc15mux 1>,
- <&adc_i2c 0>, <&adc_i2c 1>,
- <&adc_i2c 2>, <&adc_i2c 3>,
- <&adc_i2c 4>, <&adc_i2c 5>,
- <&adc_i2c 6>, <&adc_i2c 7>,
- <&adc_i2c 8>, <&adc_i2c 9>,
- <&adc_i2c 10>, <&adc_i2c 11>,
- <&adc_i2c 12>, <&adc_i2c 13>,
- <&adc_i2c 14>, <&adc_i2c 15>;
+ io-channels = <&adc0mux 0>, <&adc0mux 1>,
+ <&adc1mux 0>, <&adc1mux 1>,
+ <&adc2mux 0>, <&adc2mux 1>,
+ <&adc3mux 0>, <&adc3mux 1>,
+ <&adc4mux 0>, <&adc4mux 1>,
+ <&adc5mux 0>, <&adc5mux 1>,
+ <&adc6mux 0>, <&adc6mux 1>,
+ <&adc7mux 0>, <&adc7mux 1>,
+ <&adc8mux 0>, <&adc8mux 1>,
+ <&adc9mux 0>, <&adc9mux 1>,
+ <&adc10mux 0>, <&adc10mux 1>,
+ <&adc11mux 0>, <&adc11mux 1>,
+ <&adc12mux 0>, <&adc12mux 1>,
+ <&adc13mux 0>, <&adc13mux 1>,
+ <&adc14mux 0>, <&adc14mux 1>,
+ <&adc15mux 0>, <&adc15mux 1>,
+ <&adc_i2c_1 0>, <&adc_i2c_1 1>,
+ <&adc_i2c_1 2>, <&adc_i2c_1 3>,
+ <&adc_i2c_1 4>, <&adc_i2c_1 5>,
+ <&adc_i2c_1 6>, <&adc_i2c_1 7>,
+ <&adc_i2c_1 8>, <&adc_i2c_1 9>,
+ <&adc_i2c_1 10>, <&adc_i2c_1 11>,
+ <&adc_i2c_1 12>, <&adc_i2c_1 13>,
+ <&adc_i2c_1 14>, <&adc_i2c_1 15>,
+ <&adc0 0>, <&adc0 1>,
+ <&adc0 2>;
};
};
@@ -353,7 +371,14 @@
&i2c4 {
status = "okay";
- adc_i2c: adc@16 {
+ adc_i2c_0: adc@14 {
+ compatible = "lltc,ltc2497";
+ reg = <0x14>;
+ vref-supply = <&voltage_mon_reg>;
+ #io-channel-cells = <1>;
+ };
+
+ adc_i2c_1: adc@16 {
compatible = "lltc,ltc2497";
reg = <0x16>;
vref-supply = <&voltage_mon_reg>;
--
2.17.1
Add the MAX31790 node as a Fan I2C controller. It controls the
TACH and PWM for Fan Mt.Mitchell system.
Signed-off-by: Chanh Nguyen <[email protected]>
---
arch/arm/boot/dts/aspeed-bmc-ampere-mtmitchell.dts | 12 ++++++++++++
1 file changed, 12 insertions(+)
diff --git a/arch/arm/boot/dts/aspeed-bmc-ampere-mtmitchell.dts b/arch/arm/boot/dts/aspeed-bmc-ampere-mtmitchell.dts
index e79f56208b89..6455cf80da0e 100644
--- a/arch/arm/boot/dts/aspeed-bmc-ampere-mtmitchell.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-ampere-mtmitchell.dts
@@ -477,6 +477,18 @@
line-name = "bmc-ocp0-en-n";
};
};
+
+ max31790@20 {
+ compatible = "maxim,max31790";
+ reg = <0x20>;
+ pwm-to-tach = <0 0 0 0 1 1>;
+ };
+
+ max31790@2f {
+ compatible = "maxim,max31790";
+ reg = <0x2f>;
+ pwm-to-tach = <0 0 0 0 1 1>;
+ };
};
&i2c9 {
--
2.17.1
Enable MCTP driver on I2C3 bus for MCTP transaction
Signed-off-by: Chanh Nguyen <[email protected]>
---
arch/arm/boot/dts/aspeed-bmc-ampere-mtmitchell.dts | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/arch/arm/boot/dts/aspeed-bmc-ampere-mtmitchell.dts b/arch/arm/boot/dts/aspeed-bmc-ampere-mtmitchell.dts
index 0b5ea8620063..33e06eafed31 100644
--- a/arch/arm/boot/dts/aspeed-bmc-ampere-mtmitchell.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-ampere-mtmitchell.dts
@@ -366,6 +366,13 @@
&i2c3 {
status = "okay";
+ bus-frequency = <1000000>;
+ multi-master;
+ mctp-controller;
+ mctp@10 {
+ compatible = "mctp-i2c-controller";
+ reg = <0x10>;
+ };
};
&i2c4 {
--
2.17.1
On 25/04/2023 08:57, Chanh Nguyen wrote:
> Add the MAX31790 node as a Fan I2C controller. It controls the
> TACH and PWM for Fan Mt.Mitchell system.
>
> Signed-off-by: Chanh Nguyen <[email protected]>
> ---
> arch/arm/boot/dts/aspeed-bmc-ampere-mtmitchell.dts | 12 ++++++++++++
> 1 file changed, 12 insertions(+)
>
> diff --git a/arch/arm/boot/dts/aspeed-bmc-ampere-mtmitchell.dts b/arch/arm/boot/dts/aspeed-bmc-ampere-mtmitchell.dts
> index e79f56208b89..6455cf80da0e 100644
> --- a/arch/arm/boot/dts/aspeed-bmc-ampere-mtmitchell.dts
> +++ b/arch/arm/boot/dts/aspeed-bmc-ampere-mtmitchell.dts
> @@ -477,6 +477,18 @@
> line-name = "bmc-ocp0-en-n";
> };
> };
> +
> + max31790@20 {
Node names should be generic.
https://devicetree-specification.readthedocs.io/en/latest/chapter2-devicetree-basics.html#generic-names-recommendation
> + compatible = "maxim,max31790";
Unfortunately the compatible is undocumented.
Please run scripts/checkpatch.pl and fix reported warnings.
Best regards,
Krzysztof
On Tue, 25 Apr 2023, at 16:27, Chanh Nguyen wrote:
> Enable MCTP driver on I2C3 bus for MCTP transaction
>
> Signed-off-by: Chanh Nguyen <[email protected]>
> ---
> arch/arm/boot/dts/aspeed-bmc-ampere-mtmitchell.dts | 7 +++++++
> 1 file changed, 7 insertions(+)
>
> diff --git a/arch/arm/boot/dts/aspeed-bmc-ampere-mtmitchell.dts
> b/arch/arm/boot/dts/aspeed-bmc-ampere-mtmitchell.dts
> index 0b5ea8620063..33e06eafed31 100644
> --- a/arch/arm/boot/dts/aspeed-bmc-ampere-mtmitchell.dts
> +++ b/arch/arm/boot/dts/aspeed-bmc-ampere-mtmitchell.dts
> @@ -366,6 +366,13 @@
>
> &i2c3 {
> status = "okay";
> + bus-frequency = <1000000>;
> + multi-master;
> + mctp-controller;
> + mctp@10 {
> + compatible = "mctp-i2c-controller";
> + reg = <0x10>;
This needs to be `reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;`
Andrew
On 25/04/2023 20:15, Krzysztof Kozlowski wrote:
> On 25/04/2023 08:57, Chanh Nguyen wrote:
>> Add the MAX31790 node as a Fan I2C controller. It controls the
>> TACH and PWM for Fan Mt.Mitchell system.
>>
>> Signed-off-by: Chanh Nguyen <[email protected]>
>> ---
>> arch/arm/boot/dts/aspeed-bmc-ampere-mtmitchell.dts | 12 ++++++++++++
>> 1 file changed, 12 insertions(+)
>>
>> diff --git a/arch/arm/boot/dts/aspeed-bmc-ampere-mtmitchell.dts b/arch/arm/boot/dts/aspeed-bmc-ampere-mtmitchell.dts
>> index e79f56208b89..6455cf80da0e 100644
>> --- a/arch/arm/boot/dts/aspeed-bmc-ampere-mtmitchell.dts
>> +++ b/arch/arm/boot/dts/aspeed-bmc-ampere-mtmitchell.dts
>> @@ -477,6 +477,18 @@
>> line-name = "bmc-ocp0-en-n";
>> };
>> };
>> +
>> + max31790@20 {
>
> Node names should be generic.
> https://devicetree-specification.readthedocs.io/en/latest/chapter2-devicetree-basics.html#generic-names-recommendation
Thank Krzysztof,
I think these node names should be "fan-i2c-0" and "fan-i2c-1". Do you
have any other idea ?
>
>> + compatible = "maxim,max31790";
>
> Unfortunately the compatible is undocumented.
>
> Please run scripts/checkpatch.pl and fix reported warnings.
>
> Best regards,
> Krzysztof
>
Yes Krzysztof,
This compatible has not yes documented.
Should I push a document for max31790 to
./Documentation/devicetree/bindings/ or ask to maintainer (Guenter Roeck
<[email protected]> or Jean Delvare <[email protected]>) ?
Best regards,
Chanh Ng
On 27/04/2023 08:04, Andrew Jeffery wrote:
>
>
> On Tue, 25 Apr 2023, at 16:27, Chanh Nguyen wrote:
>> Enable MCTP driver on I2C3 bus for MCTP transaction
>>
>> Signed-off-by: Chanh Nguyen <[email protected]>
>> ---
>> arch/arm/boot/dts/aspeed-bmc-ampere-mtmitchell.dts | 7 +++++++
>> 1 file changed, 7 insertions(+)
>>
>> diff --git a/arch/arm/boot/dts/aspeed-bmc-ampere-mtmitchell.dts
>> b/arch/arm/boot/dts/aspeed-bmc-ampere-mtmitchell.dts
>> index 0b5ea8620063..33e06eafed31 100644
>> --- a/arch/arm/boot/dts/aspeed-bmc-ampere-mtmitchell.dts
>> +++ b/arch/arm/boot/dts/aspeed-bmc-ampere-mtmitchell.dts
>> @@ -366,6 +366,13 @@
>>
>> &i2c3 {
>> status = "okay";
>> + bus-frequency = <1000000>;
>> + multi-master;
>> + mctp-controller;
>> + mctp@10 {
>> + compatible = "mctp-i2c-controller";
>> + reg = <0x10>;
>
> This needs to be `reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;`
>
> Andrew
Thank Andrew, I will update that in PATCH v2.
On 07/05/2023 10:20, Chanh Nguyen wrote:
>
> On 25/04/2023 20:15, Krzysztof Kozlowski wrote:
>> On 25/04/2023 08:57, Chanh Nguyen wrote:
>>> Add the MAX31790 node as a Fan I2C controller. It controls the
>>> TACH and PWM for Fan Mt.Mitchell system.
>>>
>>> Signed-off-by: Chanh Nguyen <[email protected]>
>>> ---
>>> arch/arm/boot/dts/aspeed-bmc-ampere-mtmitchell.dts | 12 ++++++++++++
>>> 1 file changed, 12 insertions(+)
>>>
>>> diff --git a/arch/arm/boot/dts/aspeed-bmc-ampere-mtmitchell.dts b/arch/arm/boot/dts/aspeed-bmc-ampere-mtmitchell.dts
>>> index e79f56208b89..6455cf80da0e 100644
>>> --- a/arch/arm/boot/dts/aspeed-bmc-ampere-mtmitchell.dts
>>> +++ b/arch/arm/boot/dts/aspeed-bmc-ampere-mtmitchell.dts
>>> @@ -477,6 +477,18 @@
>>> line-name = "bmc-ocp0-en-n";
>>> };
>>> };
>>> +
>>> + max31790@20 {
>>
>> Node names should be generic.
>> https://devicetree-specification.readthedocs.io/en/latest/chapter2-devicetree-basics.html#generic-names-recommendation
>
> Thank Krzysztof,
>
> I think these node names should be "fan-i2c-0" and "fan-i2c-1". Do you
> have any other idea ?
i2c-0 is not generic. This should be either fan or fan-controller,
depending what this is.
>
>>
>>> + compatible = "maxim,max31790";
>>
>> Unfortunately the compatible is undocumented.
>>
>> Please run scripts/checkpatch.pl and fix reported warnings.
>>
>> Best regards,
>> Krzysztof
>>
>
> Yes Krzysztof,
>
> This compatible has not yes documented.
>
> Should I push a document for max31790 to
> ./Documentation/devicetree/bindings/ or ask to maintainer (Guenter Roeck
> <[email protected]> or Jean Delvare <[email protected]>) ?
Check on lore.kernel.org if there is ongoing work. If there is no, then
please submit new the bindings (in DT schema). Maintainers are not for
writing your code, so it's you or some other developer who should do it.
Best regards,
Krzysztof
On 07/05/2023 15:23, Krzysztof Kozlowski wrote:
> On 07/05/2023 10:20, Chanh Nguyen wrote:
>>
>> On 25/04/2023 20:15, Krzysztof Kozlowski wrote:
>>> On 25/04/2023 08:57, Chanh Nguyen wrote:
>>>> Add the MAX31790 node as a Fan I2C controller. It controls the
>>>> TACH and PWM for Fan Mt.Mitchell system.
>>>>
>>>> Signed-off-by: Chanh Nguyen <[email protected]>
>>>> ---
>>>> arch/arm/boot/dts/aspeed-bmc-ampere-mtmitchell.dts | 12 ++++++++++++
>>>> 1 file changed, 12 insertions(+)
>>>>
>>>> diff --git a/arch/arm/boot/dts/aspeed-bmc-ampere-mtmitchell.dts b/arch/arm/boot/dts/aspeed-bmc-ampere-mtmitchell.dts
>>>> index e79f56208b89..6455cf80da0e 100644
>>>> --- a/arch/arm/boot/dts/aspeed-bmc-ampere-mtmitchell.dts
>>>> +++ b/arch/arm/boot/dts/aspeed-bmc-ampere-mtmitchell.dts
>>>> @@ -477,6 +477,18 @@
>>>> line-name = "bmc-ocp0-en-n";
>>>> };
>>>> };
>>>> +
>>>> + max31790@20 {
>>>
>>> Node names should be generic.
>>> https://devicetree-specification.readthedocs.io/en/latest/chapter2-devicetree-basics.html#generic-names-recommendation
>>
>> Thank Krzysztof,
>>
>> I think these node names should be "fan-i2c-0" and "fan-i2c-1". Do you
>> have any other idea ?
>
> i2c-0 is not generic. This should be either fan or fan-controller,
> depending what this is.
Thank Krzysztof! I will update node name is "fan-controller" in PATCH v2.
>>
>>>
>>>> + compatible = "maxim,max31790";
>>>
>>> Unfortunately the compatible is undocumented.
>>>
>>> Please run scripts/checkpatch.pl and fix reported warnings.
>>>
>>> Best regards,
>>> Krzysztof
>>>
>>
>> Yes Krzysztof,
>>
>> This compatible has not yes documented.
>>
>> Should I push a document for max31790 to
>> ./Documentation/devicetree/bindings/ or ask to maintainer (Guenter Roeck
>> <[email protected]> or Jean Delvare <[email protected]>) ?
>
> Check on lore.kernel.org if there is ongoing work. If there is no, then
> please submit new the bindings (in DT schema). Maintainers are not for
> writing your code, so it's you or some other developer who should do it.
>
> Best regards,
> Krzysztof
>
Thank Krzysztof!
I checked on lore.kernel.org but no submit is in-progress for that. I'll
submit new the binding document for max31790.
Now, Do I need to remove the "[PATCH 2/4] ARM: dts: aspeed: mtmitchell:
Add I2C Fan" from PATCH v2?
And will push again "ARM: dts: aspeed: mtmitchell: Add I2C Fan" commit
once max31790 binding document was available upstream.