More IDE updates. Finally switch the IDE layer over to the ide_execute_command
interface. This should cure problems people have seen for a long time with
big arrays and shared IRQ. Treat this with care. The other stuff is mostly
minor fixes and obscure updates, except for the Kahlua audio enabler
Linux 2.4.21pre4-ac2
o Turn on use of ide_execute_command everywhere (Ross Biro, me)
o First cut at settings locking for IDE (me)
o Add driver for CS5530 Kahlua audio (me)
o Fix wrong semicolons in system.h (Mikael Pettersson)
o Support root=nbd (Ben LaHaise)
o x86 byte order swapping optimisations (Andi Kleen)
o PMAC ide updates (Ben Herrenschmidt)
o Fix mishandling of nfsroot port= option (Eric Lammerts)
o Fix ALi audio on systems with > 2Gb RAM (Ivan Kokshaysky)
o Enable generic rtc on PPC boxes (Geert Uytterhoeven)
o Fix ide build with gcc 3.3 snapshot (Olaf Hering)
o Merge EHCI updates (qh state machine fix etc) (David Brownell)
o Fix radio-cadet SMP build (Adrian Bunk)
o Starfire updates (Ion Badulescu)
o Backport seq_file fix to 2.4 (Eric Sandeen)
o Fix ext3 crash deleting a single non sparse (Stephen Tweedie)
file exceeding 1Tb
Linux 2.4.21pre4-ac1
o Restore the mmap corner case fix (Raul)
o Add sendfile64 to 2.4.x (Christoph Hellwig)
o NLM garbage collection hang fix (Daniel Forrest)
o Enable kernel side pcigart for radeon (Michael Danzer)
| Requires recent XFree and ForcePCIMode
o Don't bash legacy floppy on x86_64 bootup (Mikael Petersson)
o Forward sony joygdial input to input layer (Stelian Pop)
o TCP session stall fix (Alexey Kuznetsov)
o Ian Nelson has moved (Ian Nelson)
o Add unplugged iops ready for hotplug IDE support(me)
o Add an OUTBSYNC iop for the IDE layer (Ben Herrenschmidt)
o Finish the ide_execute_command code (me)
o Switch ide-cd to ide_execute_command (me)
| Always good to test stuff on read only devices first 8)
o Fix IDE masking logic error (Ross Biro)
o Fix IDE mishandling of IRQ 0 devices (me)
o Fix printk levels on promise drivers (me)
o Clean up duplicate mmio ops/printk in siimage (me)
o Always set interrupt line with VIA northbridge (me)
| Should fix apic mode problems with USB/audio/net on VIA boards
o Add Diamond technology dt0893 codec (Thomas Davis)
o Add IBM 'Ruthless' platform string to summit
o Don't warn about IRQ when enabling a pure (me)
legacy mode IDE class device
o Clean up radio_cadet locking and other bugs (me)
o Fix jiffies mishandling in eata drivers (Tim Schmielau)
o Quieten confusing DMA disabled messages (Tomas Szepe)
o i830 DRM update port over (Arjan van de Ven)
Linux 2.4.21pre3-ac5
o Fix erratic oopsing on 2.4.21pre3-ac* (Hugh Dickins)
o Fix an incorrect check in raw.c (Artur Frycze)
o Fix highmem IDE DMA (Jens Axboe)
o Fix the size of the EDD area (Kevin Lawton)
o Remove incorrect ACPI blacklist entry (Pavel Machek)
o SCSI memory leak fix (Justin Gibbs)
o Fix mmap of vmalloc area in kmem giving wrong (Tony Dziedzic)
results
o Fix date in the microcode driver (Jonah Sherman)
o Fix incorrect smc9194 handling of skb_padto (David McCullough)
o Fix use of old check_regio function in umc8672 (William Stinson)
o Remove unused variable in sc1200 (Bob Miller)
o Perform ide_cs unregister in task context (Paul Mackerras)
| This doesn't fix all the bugs yet...
o Fix bugs in the gx power management code (Hiroshi Miura)
o Fix the sl82c105 driver for the new IDE code (Benjamin Herrenschmidt,
Russell King)
o Remove cacheflush debug printk (me)
o Fix IDE paths in docs for new layout (Karl-Heinz Eischer)
o Generic RTC driver backport (Geert Uytterhoeven)
o HDLC driver updates (Krzysztof Halasa)
o AMD8111 random number generator support (Andi Kleen)
o Fix crashes on e2100 driver (me)
Linux 2.4.21pre3-ac4
o Finish verifying PIIX/ICH drivers versus errata (me)
o Fix handling of DMA0 MWDMA on early ICH (me)
o Fix compile in kernel for Aurora SIO16 (Adrian Bunk)
o Clean up various Configure.help bits (Adrian Bunk)
o Disallow write combining on 450NX (me)
o Ensure rev C0 450NX has restreaming off (me)
o Don't do IDE DMA on rev B0 450NX or later (me)
450NX without BIOS workarounds for the hang
o Update Configure.help for HPT IDE (Adrian Bunk)
o Fix harmless code error in sb_mixer (Jeff Garzik)
o Fix ethernet padding on via-rhine (Roger Luethi)
o Add ndelay functionality for x86 (me)
| Based on Ross Biro's code
o Add ide_execute_command (me)
| Again based on Ross Biro's changed. Not yet used
| This will be the new correct way to kick off an
| IDE command from non IRQ context
o Matroxfb compile fix for one option combination (Petr Vandrovec)
Linux 2.4.21pre3-ac3
o Address comments on wcache value/issuing (me)
cache flush requests
o Update credits entry for Stelian Pop (Stelian Pop)
o Backport some sonypi improvements from 2.5 (Kunihiko IMAI)
o Fix pdcraid/silraid symbol clash (Arjan van de Ven)
o Fix ehci build with older gcc (Greg Kroah-Hartmann)
o Fix via 8233/5 hang (me)
o Fix non SMP cpufreq build (Eyal Lebidinsky)
o Fix sbp2 build with some config options (Eyal Lebidinsky)
o Fix ATM build bugs (Francois Romieu)
o Fix an ipc/sem.c race (Bernhard Kaindl)
o Fix toshiba keyboard double release (Unknown)
o CPUFreq updaes/fixes (Dominik Brodowski)
o Natsemi Geode/Cyrix MediaGX cpufreq support (Hiroshi Miura,
Zwane Mwaikambo)
o Add frequency table helpers to CPUfreq (Dominik Brodowski)
Linux 2.4.21pre3-ac2
o Fix the dumb bug in skb_pad (Dave Miller)
o Confirm some sparc bits are wrong and drop them (Dave Miller)
o Remove a wrong additional copyright comment (Dave Miller)
o Upgrade IPMI driver to v16 (Corey Minyard)
o Fix 3c523 compile (Francois Romieu)
o Handle newer rpm where -ta is rpmbuild not rpm (me)
o Driver for Aurora Sio16 PCI adapter series (Joachim Martillo)
(SIO8000P, 16000P, and CPCI)
| Initial merge
o Backport Hammer 32bit mtrr/nmi changes (Andi Kleen)
o Add the fast IRQ path to via 8233/5 audio (me)
Linux 2.4.21pre3-ac1
+ Handle battery quirk on the Vaio Z600-RE (Paul Mitcheson)
* EHCI USB updates (David Brownell)
+ IDE Raid support for AMI/SI 'Medley' IDE Raid (Arjan van de Ven)
+ NVIDIA nForce2 IDE PCI identifiers (Johannes Deisenhofer,
Tim Krieglstein)
* CPU bitmask truncation fix (Bjorn Helgaas)
o HP100 cleanup (Pavel Machek)
o Fix initial capslock handling on USB keyboard (Pete Zaitcev)
+ Update dscc4 driver for new wan (Francois Romieu)
+ Fix boot on Chaintech 4BEA/4BEA-R and (Alexander Achenbach)
Gigabyte 9EJL by handing wacky E820 memory
reporting
o SysKonnect driver updates (Mirko Lindner)
o Fix memory leak in n_hdlc (Paul Fulghum)
o Fix missing mtd dependancy (Herbert Xu)
+ Clean up ide-tape printk stuff (Pete Zaitcev)
+ IDE tape fixes (Pete Zaitcev)
o Fix size reporting of large disks in scsi (Andries Brouwer)
+ Fix excessive stack usage in NMI handlers (Mikael Pettersson)
+ Add support for Epson 785EPX USB printer pcmcia (Khalid Aziz)
* Quirk handler to sort out IDE compatibility (Ivan Kokshaysky)
mishandling
+ Model 1 is valid for PIV in MP table (Egenera)
+ Ethernet padding fixes for various drivers (me)
o Allow trident codec setup to time out (Ian Soboroff)
This can happen with non PM codecs
o Fix broken documentation link (Henning Meier-Geinitz)
o Update video4linux docbook (William Stimson)
o Correct kmalloc check in dpt_i2o (Pablo Menichini)
o Shrink kmap area to required space only (Manfred Spraul)
o Fix irq balancing (Ben LaHaise)
o CPUfreq updates (Dominik Brodowski)
o Fix typo in pmagb fb (John Bradford)
o EDD backport (Matt Domsch)
REMOVED FOR NOW
- RMAP
REMOVED FOR GOOD
- LLC (See 2.5)
- VaryIO (Never accepted mainstream)
Running into hangs on shutdown/reboot. I've let it set for 5
minutes without it continuing. It hangs while flushing IDE
devices. 2.4.21-pre4 shutsdown and reboots fine. I haven't
tried 2.4.pre4-ac1.
Messages on screen before hang:
Unmounting remote file systems... done.
Deconfiguring network interfaces... done.
Deactivating swap... done.
Unmounting local filesystems... done.
rebooting,... md: stopping all md devices.
md: marking sb clean...
[sniped normal md shutdown messages]
md: md1 switched to read-only mode.
flushing ide devices: hda hdb _
"_" is where the cursor is when it hangs. Full dmesg output from
boot up is below.
I did a test to see if the drive was the issue and removed it. The
system still hung.
flushing ide devices: hda hdc hde _
Alan Cox wrote:
> More IDE updates. Finally switch the IDE layer over to the
ide_execute_command
> interface. This should cure problems people have seen for a long time
with
> big arrays and shared IRQ. Treat this with care. The other stuff is
mostly
> minor fixes and obscure updates, except for the Kahlua audio enabler
Linux version 2.4.21-pre4-ac1 (root@blip) (gcc version 3.2.1 20020924
(Debian prerelease)) #14 SMP Tue Feb 4 15:01:02 CST 2003
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009e800 (usable)
BIOS-e820: 000000000009e800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
BIOS-e820: 000000001fff0000 - 000000001fff3000 (ACPI NVS)
BIOS-e820: 000000001fff3000 - 0000000020000000 (ACPI data)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
511MB LOWMEM available.
On node 0 totalpages: 131056
zone(0): 4096 pages.
zone(1): 126960 pages.
zone(2): 0 pages.
Kernel command line: auto BOOT_IMAGE=Linux ro root=302 ide0=ata66 ide1=ata66
ide_setup: ide0=ata66
ide_setup: ide1=ata66
Found and enabled local APIC!
Initializing CPU#0
Detected 1737.307 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 3460.30 BogoMIPS
Memory: 515400k/524224k available (1519k kernel code, 8432k reserved,
579k data, 120k init, 0k highmem)
Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
Inode cache hash table entries: 32768 (order: 6, 262144 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 32768 (order: 5, 131072 bytes)
Page-cache hash table entries: 131072 (order: 7, 524288 bytes)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 256K (64 bytes/line)
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: After generic, caps: 0383fbff c1c3fbff 00000000 00000000
CPU: Common caps: 0383fbff c1c3fbff 00000000 00000000
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.40 (20010327) Richard Gooch ([email protected])
mtrr: detected mtrr type: Intel
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 256K (64 bytes/line)
Intel machine check reporting enabled on CPU#0.
CPU: After generic, caps: 0383fbff c1c3fbff 00000000 00000000
CPU: Common caps: 0383fbff c1c3fbff 00000000 00000000
CPU0: AMD Athlon(tm) XP 2100+ stepping 02
per-CPU timeslice cutoff: 731.30 usecs.
task migration cache decay timeout: 10 msecs.
SMP motherboard not detected.
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 1737.2986 MHz.
..... host bus clock speed is 267.2766 MHz.
cpu: 0, clocks: 2672766, slice: 1336383
CPU0<T0:2672752,T1:1336368,D:1,S:1336383,C:2672766>
migration_task 0 on cpu=0
PCI: PCI BIOS revision 2.10 entry at 0xfb560, last bus=2
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: Discovered primary peer bus ff [IRQ]
PCI: Using IRQ router default [10de/01e0] at 00:00.0
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
Journalled Block Device driver loaded
parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE]
parport0: irq 7 detected
i2c-core.o: i2c core module
i2c-dev.o: i2c /dev entries driver module
i2c-core.o: driver i2c-dev dummy driver registered.
i2c-proc.o version 2.6.1 (20010825)
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ
SERIAL_PCI ISAPNP enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
loop: loaded (max 8 devices)
Linux agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 439M
agpgart: unsupported bridge
agpgart: no supported devices found.
Uniform Multi-Platform E-IDE driver Revision: 7.00beta-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
NFORCE2: IDE controller at PCI slot 00:09.0
NFORCE2: chipset revision 162
NFORCE2: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA
PDC20269: IDE controller at PCI slot 01:07.0
PDC20269: chipset revision 2
PDC20269: not 100% native mode: will probe irqs later
ide2: BM-DMA at 0xa000-0xa007, BIOS settings: hde:pio, hdf:pio
ide3: BM-DMA at 0xa008-0xa00f, BIOS settings: hdg:pio, hdh:pio
hda: C/H/S=22070/16/255 from BIOS ignored
hda: Maxtor 54610H6, ATA DISK drive
hdb: CREATIVE DVD-ROM DVD1241E, ATAPI CD/DVD-ROM drive
blk: queue c0395f60, I/O limit 4095Mb (mask 0xffffffff)
hdc: Maxtor 54610H6, ATA DISK drive
blk: queue c03963d0, I/O limit 4095Mb (mask 0xffffffff)
hde: Maxtor 4G160J8, ATA DISK drive
blk: queue c0396840, I/O limit 4095Mb (mask 0xffffffff)
hdg: Maxtor 4G160J8, ATA DISK drive
blk: queue c0396cb0, I/O limit 4095Mb (mask 0xffffffff)
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
ide2 at 0x9000-0x9007,0x9402 on irq 10
ide3 at 0x9800-0x9807,0x9c02 on irq 10
hda: host protected area => 1
hda: 90045648 sectors (46103 MB) w/2048KiB Cache, CHS=89331/16/63, UDMA(100)
hdc: host protected area => 1
hdc: 90045648 sectors (46103 MB) w/2048KiB Cache, CHS=89331/16/63, UDMA(100)
hde: host protected area => 1
hde: 320173056 sectors (163929 MB) w/2048KiB Cache, CHS=19929/255/63,
UDMA(133)
hdg: host protected area => 1
hdg: 320173056 sectors (163929 MB) w/2048KiB Cache, CHS=19929/255/63,
UDMA(133)
hdb: ATAPI 40X DVD-ROM drive, 256kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.12
Partition check:
hda: hda1 hda2 hda3 < hda5 hda6 hda7 >
hdc: hdc1 hdc2 hdc3 < hdc5 hdc6 hdc7 >
hde: hde1 hde2
hdg: hdg1 hdg2
SCSI subsystem driver Revision: 1.00
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
Linux video capture interface: v1.00
md: raid1 personality registered as nr 3
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP: Hash tables configured (established 32768 bind 32768)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 120k freed
Adding Swap: 1999832k swap-space (priority -1)
Adding Swap: 1999832k swap-space (priority -2)
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,2), internal journal
nvidia: loading NVIDIA Linux x86 NVdriver Kernel Module 1.0-3123 Tue
Aug 27 15:56:48 PDT 2002
PCI: Setting latency timer of device 00:04.0 to 64
Intel 810 + AC97 Audio, version 0.24, 14:35:33 Feb 4 2003
PCI: Setting latency timer of device 00:06.0 to 64
i810: NVIDIA nForce Audio found at IO 0xc800 and 0xc400, MEM 0x0000 and
0x0000, IRQ 11
i810_audio: Audio Controller supports 6 channels.
i810_audio: Defaulting to base 2 channel mode.
i810_audio: Resetting connection 0
ac97_codec: AC97 Audio codec, id: ALG32 (ALC650)
i810_audio: AC'97 codec 0, new EID value = 0x05c7
i810_audio: AC'97 codec 0, DAC map configured, total channels = 6
PCI: Setting latency timer of device 00:02.0 to 64
usb-ohci.c: USB OHCI at membase 0xe0b11000, IRQ 10
usb-ohci.c: usb-00:02.0, PCI device 10de:0067 (nVidia Corporation)
usb.c: new USB bus registered, assigned bus number 1
usb.c: kmalloc IF defd4e40, numif 1
usb.c: new device strings: Mfr=0, Product=2, SerialNumber=1
usb.c: USB device number 1 default language ID 0x0
Product: USB OHCI Root Hub
SerialNumber: e0b11000
hub.c: USB hub found
hub.c: 3 ports detected
hub.c: standalone hub
hub.c: ganged power switching
hub.c: global over-current protection
hub.c: Port indicators are not supported
hub.c: power on to power good time: 2ms
hub.c: hub controller current requirement: 0mA
hub.c: port removable status: RRR
hub.c: local power source is good
hub.c: no over-current condition exists
hub.c: enabling power on all ports
usb.c: hub driver claimed interface defd4e40
usb.c: kusbd: /sbin/hotplug add 1
usb.c: kusbd policy returned 0xfffffffe
PCI: Setting latency timer of device 00:02.1 to 64
usb-ohci.c: USB OHCI at membase 0xe0b13000, IRQ 11
usb-ohci.c: usb-00:02.1, PCI device 10de:0067 (nVidia Corporation)
usb.c: new USB bus registered, assigned bus number 2
usb.c: kmalloc IF defd4bc0, numif 1
usb.c: new device strings: Mfr=0, Product=2, SerialNumber=1
usb.c: USB device number 1 default language ID 0x0
Product: USB OHCI Root Hub
SerialNumber: e0b13000
hub.c: USB hub found
hub.c: 3 ports detected
hub.c: standalone hub
hub.c: ganged power switching
hub.c: global over-current protection
hub.c: Port indicators are not supported
hub.c: power on to power good time: 2ms
hub.c: hub controller current requirement: 0mA
hub.c: port removable status: RRR
hub.c: local power source is good
hub.c: no over-current condition exists
hub.c: enabling power on all ports
usb.c: hub driver claimed interface defd4bc0
usb.c: kusbd: /sbin/hotplug add 1
usb.c: kusbd policy returned 0xfffffffe
[events: 0000005b]
md: bind<hdc7,1>
[events: 0000005b]
md: bind<hda7,2>
md: hda7's event counter: 0000005b
md: hdc7's event counter: 0000005b
md: RAID level 1 does not need chunksize! Continuing anyway.
md1: max total readahead window set to 124k
md1: 1 data-disks, max readahead per data-disk: 124k
raid1: device hda7 operational as mirror 0
raid1: device hdc7 operational as mirror 1
raid1: raid set md1 active with 2 out of 2 mirrors
md: updating md1 RAID superblock on device
md: hda7 [events: 0000005c]<6>(write) hda7's sb offset: 28772736
md: hdc7 [events: 0000005c]<6>(write) hdc7's sb offset: 28772736
[events: 0000002e]
md: bind<hdc6,1>
[events: 0000002e]
md: bind<hda6,2>
md: hda6's event counter: 0000002e
md: hdc6's event counter: 0000002e
md: RAID level 1 does not need chunksize! Continuing anyway.
md0: max total readahead window set to 124k
md0: 1 data-disks, max readahead per data-disk: 124k
raid1: device hda6 operational as mirror 0
raid1: device hdc6 operational as mirror 1
raid1: raid set md0 active with 2 out of 2 mirrors
md: updating md0 RAID superblock on device
md: hda6 [events: 0000002f]<6>(write) hda6's sb offset: 9999744
md: hdc6 [events: 0000002f]<6>(write) hdc6's sb offset: 9999744
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide1(22,5), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on md(9,0), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on md(9,1), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide2(33,2), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide3(34,2), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Alan Cox wrote:
>
> More IDE updates. Finally switch the IDE layer over to the ide_execute_command
> interface. This should cure problems people have seen for a long time with
> big arrays and shared IRQ. Treat this with care. The other stuff is mostly
> minor fixes and obscure updates, except for the Kahlua audio enabler
>
> Linux 2.4.21pre4-ac2
Builds OK but note that the version says -ac1 in the top Makefile.
--
Eyal Lebedinsky ([email protected]) <http://samba.org/eyal/>
From: Alan Cox <[email protected]>
Date: Tue, Feb 04, 2003 at 12:02:24PM -0500
> More IDE updates. Finally switch the IDE layer over to the ide_execute_command
> interface. This should cure problems people have seen for a long time with
> big arrays and shared IRQ. Treat this with care. The other stuff is mostly
> minor fixes and obscure updates, except for the Kahlua audio enabler
>
> Linux 2.4.21pre4-ac2
Your Makefile still claims to be ac1.
> o Turn on use of ide_execute_command everywhere (Ross Biro, me)
> o First cut at settings locking for IDE (me)
Some of these may be responsible for something new: my system hangs at shutdown,
saying 'flushing ide devices: hda hdc'. This didn't happen with
2.4.21pre3-ac5. hdc is a cdwriter, used as ide-scsi.
Kind regards,
Jurriaan
Linux version 2.4.21-pre4-ac2 (root@middle) (gcc version 3.2.2 20030131 (Debian prerelease)) #2 SMP Tue Feb 4 20:17:24 CET 2003
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
BIOS-e820: 000000001fff0000 - 000000001fff3000 (ACPI NVS)
BIOS-e820: 000000001fff3000 - 0000000020000000 (ACPI data)
BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
511MB LOWMEM available.
found SMP MP-table at 000f4f80
hm, page 000f4000 reserved twice.
hm, page 000f5000 reserved twice.
hm, page 000f1000 reserved twice.
hm, page 000f2000 reserved twice.
On node 0 totalpages: 131056
zone(0): 4096 pages.
zone(1): 126960 pages.
zone(2): 0 pages.
Intel MultiProcessor Specification v1.4
Virtual Wire compatibility mode.
OEM ID: OEM00000 Product ID: PROD00000000 APIC at: 0xFEE00000
Processor #0 Pentium(tm) Pro APIC version 17
Processor #1 Pentium(tm) Pro APIC version 17
I/O APIC #2 Version 17 at 0xFEC00000.
Enabling APIC mode: Flat. Using 1 I/O APICs
Processors: 2
Kernel command line: root=/dev/hda7 video=matrox:vesa:0x11E,fv:80,sgram hdc=scsi apm=power-off
ide_setup: hdc=scsi
Initializing CPU#0
Detected 1173.836 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 2339.63 BogoMIPS
Memory: 515104k/524224k available (1748k kernel code, 8732k reserved, 439k data, 336k init, 0k highmem)
Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
Inode cache hash table entries: 32768 (order: 6, 262144 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 32768 (order: 5, 131072 bytes)
Page-cache hash table entries: 131072 (order: 7, 524288 bytes)
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 512K
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: After generic, caps: 0383fbff 00000000 00000000 00000000
CPU: Common caps: 0383fbff 00000000 00000000 00000000
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.40 (20010327) Richard Gooch ([email protected])
mtrr: detected mtrr type: Intel
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 512K
Intel machine check reporting enabled on CPU#0.
CPU: After generic, caps: 0383fbff 00000000 00000000 00000000
CPU: Common caps: 0383fbff 00000000 00000000 00000000
CPU0: Intel(R) Pentium(R) III CPU - S 1400MHz stepping 04
per-CPU timeslice cutoff: 1463.48 usecs.
task migration cache decay timeout: 10 msecs.
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Booting processor 1/1 eip 2000
Initializing CPU#1
masked ExtINT on CPU#1
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Calibrating delay loop... 2346.18 BogoMIPS
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 512K
Intel machine check reporting enabled on CPU#1.
CPU: After generic, caps: 0383fbff 00000000 00000000 00000000
CPU: Common caps: 0383fbff 00000000 00000000 00000000
CPU1: Intel(R) Pentium(R) III CPU - S 1400MHz stepping 04
Total of 2 processors activated (4685.82 BogoMIPS).
ENABLING IO-APIC IRQs
Setting 2 in the phys_id_present_map
...changing IO-APIC physical APIC ID to 2 ... ok.
init IO_APIC IRQs
IO-APIC (apicid-pin) 2-0, 2-16, 2-17, 2-18, 2-19, 2-20, 2-21, 2-22, 2-23 not connected.
..TIMER: vector=0x31 pin1=2 pin2=0
number of MP IRQ sources: 25.
number of IO-APIC #2 registers: 24.
testing the IO APIC.......................
IO APIC #2......
.... register #00: 02000000
....... : physical APIC id: 02
.... register #01: 00178011
....... : max redirection entries: 0017
....... : PRQ implemented: 1
....... : IO APIC version: 0011
.... register #02: 00000000
....... : arbitration: 00
.... IRQ redirection table:
NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
00 000 00 1 0 0 0 0 0 0 00
01 001 01 0 0 0 0 0 1 1 39
02 001 01 0 0 0 0 0 1 1 31
03 001 01 0 0 0 0 0 1 1 41
04 001 01 0 0 0 0 0 1 1 49
05 001 01 1 1 0 1 0 1 1 51
06 001 01 0 0 0 0 0 1 1 59
07 001 01 0 0 0 0 0 1 1 61
08 001 01 0 0 0 0 0 1 1 69
09 001 01 0 0 0 0 0 1 1 71
0a 001 01 1 1 0 1 0 1 1 79
0b 001 01 1 1 0 1 0 1 1 81
0c 001 01 0 0 0 0 0 1 1 89
0d 001 01 0 0 0 0 0 1 1 91
0e 001 01 0 0 0 0 0 1 1 99
0f 001 01 0 0 0 0 0 1 1 A1
10 000 00 1 0 0 0 0 0 0 00
11 000 00 1 0 0 0 0 0 0 00
12 000 00 1 0 0 0 0 0 0 00
13 000 00 1 0 0 0 0 0 0 00
14 000 00 1 0 0 0 0 0 0 00
15 000 00 1 0 0 0 0 0 0 00
16 000 00 1 0 0 0 0 0 0 00
17 000 00 1 0 0 0 0 0 0 00
IRQ to pin mappings:
IRQ0 -> 0:2
IRQ1 -> 0:1
IRQ3 -> 0:3
IRQ4 -> 0:4
IRQ5 -> 0:5
IRQ6 -> 0:6
IRQ7 -> 0:7
IRQ8 -> 0:8
IRQ9 -> 0:9
IRQ10 -> 0:10
IRQ11 -> 0:11
IRQ12 -> 0:12
IRQ13 -> 0:13
IRQ14 -> 0:14
IRQ15 -> 0:15
.................................... done.
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 1173.8847 MHz.
..... host bus clock speed is 111.7985 MHz.
cpu: 0, clocks: 1117985, slice: 372661
CPU0<T0:1117984,T1:745312,D:11,S:372661,C:1117985>
cpu: 1, clocks: 1117985, slice: 372661
CPU1<T0:1117984,T1:372656,D:6,S:372661,C:1117985>
migration_task 0 on cpu=0
migration_task 1 on cpu=1
mtrr: your CPUs had inconsistent fixed MTRR settings
mtrr: your CPUs had inconsistent variable MTRR settings
mtrr: probably your BIOS does not setup all CPUs
PCI: PCI BIOS revision 2.10 entry at 0xfb3c0, last bus=1
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: Using IRQ router default [1106/3101] at 00:00.0
PCI->APIC IRQ transform: (B0,I9,P0) -> 11
PCI->APIC IRQ transform: (B0,I11,P0) -> 10
PCI->APIC IRQ transform: (B0,I12,P0) -> 5
PCI->APIC IRQ transform: (B0,I13,P0) -> 11
PCI->APIC IRQ transform: (B0,I14,P0) -> 10
PCI->APIC IRQ transform: (B0,I15,P0) -> 10
PCI->APIC IRQ transform: (B0,I17,P3) -> 5
PCI->APIC IRQ transform: (B0,I17,P3) -> 5
PCI->APIC IRQ transform: (B0,I17,P3) -> 5
PCI->APIC IRQ transform: (B0,I18,P0) -> 11
PCI->APIC IRQ transform: (B1,I0,P0) -> 11
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16)
apm: disabled - APM is not SMP safe (power off active).
Starting kswapd
matroxfb: Matrox G400 (AGP) detected
matroxfb: MTRR's turned on
matroxfb: 1600x1200x16bpp (virtual: 1600x5241)
matroxfb: framebuffer at 0xD4000000, mapped to 0xe0805000, size 33554432
Console: switching to colour frame buffer device 133x54
fb0: MATROX VGA frame buffer device
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
Software Watchdog Timer: 0.05, timer margin: 60 sec
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
Linux Tulip driver version 0.9.15-pre12 (Aug 9, 2002)
tulip0: MII transceiver #1 config 3100 status 7829 advertising 01e1.
eth0: Lite-On 82c168 PNIC rev 32 at 0xac00, 00:A0:CC:21:A1:AC, IRQ 5.
via-rhine.c:v1.10-LK1.1.15 November-22-2002 Written by Donald Becker
http://www.scyld.com/network/via-rhine.html
eth1: VIA VT6102 Rhine-II at 0xda022000, 00:d0:68:00:5a:8b, IRQ 11.
eth1: MII PHY found at address 1, status 0x786d advertising 05e1 Link 45e1.
Uniform Multi-Platform E-IDE driver Revision: 7.00beta-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
PDC20265: IDE controller at PCI slot 00:0d.0
PDC20265: chipset revision 2
PDC20265: not 100% native mode: will probe irqs later
PDC20265: (U)DMA Burst Bit DISABLED Primary PCI Mode Secondary PCI Mode.
ide2: BM-DMA at 0xc000-0xc007, BIOS settings: hde:DMA, hdf:DMA
ide3: BM-DMA at 0xc008-0xc00f, BIOS settings: hdg:DMA, hdh:pio
HPT370A: IDE controller at PCI slot 00:0f.0
HPT370A: chipset revision 4
HPT370A: not 100% native mode: will probe irqs later
HPT37X: using 33MHz PCI clock
ide4: BM-DMA at 0xd800-0xd807, BIOS settings: hdi:DMA, hdj:pio
ide5: BM-DMA at 0xd808-0xd80f, BIOS settings: hdk:DMA, hdl:pio
VP_IDE: IDE controller at PCI slot 00:11.1
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
VP_IDE: VIA vt8233 (rev 00) IDE UDMA100 controller on pci00:11.1
ide0: BM-DMA at 0xdc00-0xdc07, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xdc08-0xdc0f, BIOS settings: hdc:DMA, hdd:pio
hda: Maxtor 33073H3, ATA DISK drive
blk: queue c03df440, I/O limit 4095Mb (mask 0xffffffff)
hdc: LITE-ON LTR-40125W, ATAPI CD/DVD-ROM drive
hde: Maxtor 4G120J6, ATA DISK drive
hdf: Maxtor 4G120J6, ATA DISK drive
blk: queue c03dfd60, I/O limit 4095Mb (mask 0xffffffff)
blk: queue c03dfebc, I/O limit 4095Mb (mask 0xffffffff)
hdg: IBM-DTLA-307045, ATA DISK drive
blk: queue c03e01f0, I/O limit 4095Mb (mask 0xffffffff)
hdi: WDC WD800JB-00CRA1, ATA DISK drive
blk: queue c03e0680, I/O limit 4095Mb (mask 0xffffffff)
hdk: WDC WD800JB-00CRA1, ATA DISK drive
blk: queue c03e0b10, I/O limit 4095Mb (mask 0xffffffff)
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
ide2 at 0xb000-0xb007,0xb402 on irq 11
ide3 at 0xb800-0xb807,0xbc02 on irq 11
ide4 at 0xc800-0xc807,0xcc02 on irq 10
ide5 at 0xd000-0xd007,0xd402 on irq 10
hda: host protected area => 1
hda: 60032448 sectors (30737 MB) w/2048KiB Cache, CHS=3736/255/63, UDMA(100)
hde: host protected area => 1
hde: 240121728 sectors (122942 MB) w/2048KiB Cache, CHS=14946/255/63, UDMA(100)
hdf: host protected area => 1
hdf: 240121728 sectors (122942 MB) w/2048KiB Cache, CHS=14946/255/63, UDMA(100)
hdg: host protected area => 1
hdg: 90069840 sectors (46116 MB) w/1916KiB Cache, CHS=89355/16/63, UDMA(100)
hdi: host protected area => 1
hdi: 156301488 sectors (80026 MB) w/8192KiB Cache, CHS=155061/16/63, UDMA(100)
hdk: host protected area => 1
hdk: 156301488 sectors (80026 MB) w/8192KiB Cache, CHS=155061/16/63, UDMA(100)
ide-cd: passing drive hdc to ide-scsi emulation.
Partition check:
hda: hda1 hda2 < hda5 hda6 hda7 hda8 hda9 hda10 hda11 hda12 >
hde: hde1 hde2
hdf: hdf1 hdf2
hdg:<6> [PTBL] [5606/255/63] hdg1 hdg2
hdi: hdi1 hdi2
hdk: hdk1 hdk2
SCSI subsystem driver Revision: 1.00
sym53c8xx: at PCI bus 0, device 11, function 0
sym53c8xx: setting PCI_COMMAND_PARITY...(fix-up)
sym53c8xx: 53c860 detected
sym53c860-0: rev 0x13 on pci bus 0 device 11 function 0 irq 10
sym53c860-0: ID 7, Fast-20, Parity Checking
scsi0 : sym53c8xx-1.7.3c-20010512
Vendor: TOSHIBA Model: DVD-ROM SD-M1401 Rev: 1007
Type: CD-ROM ANSI SCSI revision: 02
Vendor: PLEXTOR Model: CD-ROM PX-32TS Rev: 1.02
Type: CD-ROM ANSI SCSI revision: 02
Vendor: YAMAHA Model: CRW2100S Rev: 1.0N
Type: CD-ROM ANSI SCSI revision: 02
scsi1 : SCSI host adapter emulation for IDE ATAPI devices
Vendor: LITE-ON Model: LTR-40125W Rev: WS05
Type: CD-ROM ANSI SCSI revision: 02
Attached scsi CD-ROM sr0 at scsi0, channel 0, id 1, lun 0
Attached scsi CD-ROM sr1 at scsi0, channel 0, id 2, lun 0
Attached scsi CD-ROM sr2 at scsi0, channel 0, id 5, lun 0
Attached scsi CD-ROM sr3 at scsi1, channel 0, id 0, lun 0
sym53c860-0-<1,*>: FAST-20 SCSI 20.0 MB/s (50.0 ns, offset 8)
sr0: scsi3-mmc drive: 40x/40x cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.12
sym53c860-0-<2,*>: FAST-20 SCSI 20.0 MB/s (50.0 ns, offset 8)
sr1: scsi-1 drive
sym53c860-0-<5,*>: FAST-20 SCSI 20.0 MB/s (50.0 ns, offset 7)
sr2: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
sr3: scsi3-mmc drive: 247x/48x writer cd/rw xa/form2 cdda tray
md: linear personality registered as nr 1
md: raid0 personality registered as nr 2
md: raid1 personality registered as nr 3
md: raid5 personality registered as nr 4
raid5: measuring checksumming speed
8regs : 2163.600 MB/sec
32regs : 965.200 MB/sec
pIII_sse : 2747.200 MB/sec
pII_mmx : 2602.400 MB/sec
p5_mmx : 2755.200 MB/sec
raid5: using function: pIII_sse (2747.200 MB/sec)
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: Autodetecting RAID arrays.
[events: 00000066]
[events: 00000063]
[events: 00000066]
[events: 00000063]
md: autorun ...
md: considering hdk2 ...
md: adding hdk2 ...
md: adding hdi2 ...
md: created md1
md: bind<hdi2,1>
md: bind<hdk2,2>
md: running: <hdk2><hdi2>
md: hdk2's event counter: 00000063
md: hdi2's event counter: 00000063
md1: max total readahead window set to 512k
md1: 2 data-disks, max readahead per data-disk: 256k
raid0: looking at hdi2
raid0: comparing hdi2(7590656) with hdi2(7590656)
raid0: END
raid0: ==> UNIQUE
raid0: 1 zones
raid0: looking at hdk2
raid0: comparing hdk2(7590656) with hdi2(7590656)
raid0: EQUAL
raid0: FINAL 1 zones
raid0: zone 0
raid0: checking hdi2 ... contained as device 0
(7590656) is smallest!.
raid0: checking hdk2 ... contained as device 1
raid0: zone->nb_dev: 2, size: 15181312
raid0: current zone offset: 7590656
raid0: done.
raid0 : md_size is 15181312 blocks.
raid0 : conf->smallest->size is 15181312 blocks.
raid0 : nb_zone is 1.
raid0 : Allocating 8 bytes for hash.
md: updating md1 RAID superblock on device
md: hdk2 [events: 00000064]<6>(write) hdk2's sb offset: 7590656
md: hdi2 [events: 00000064]<6>(write) hdi2's sb offset: 7590656
md: considering hdk1 ...
md: adding hdk1 ...
md: adding hdi1 ...
md: created md0
md: bind<hdi1,1>
md: bind<hdk1,2>
md: running: <hdk1><hdi1>
md: hdk1's event counter: 00000066
md: hdi1's event counter: 00000066
md0: max total readahead window set to 512k
md0: 2 data-disks, max readahead per data-disk: 256k
raid0: looking at hdi1
raid0: comparing hdi1(70559872) with hdi1(70559872)
raid0: END
raid0: ==> UNIQUE
raid0: 1 zones
raid0: looking at hdk1
raid0: comparing hdk1(70559872) with hdi1(70559872)
raid0: EQUAL
raid0: FINAL 1 zones
raid0: zone 0
raid0: checking hdi1 ... contained as device 0
(70559872) is smallest!.
raid0: checking hdk1 ... contained as device 1
raid0: zone->nb_dev: 2, size: 141119744
raid0: current zone offset: 70559872
raid0: done.
raid0 : md_size is 141119744 blocks.
raid0 : conf->smallest->size is 141119744 blocks.
raid0 : nb_zone is 1.
raid0 : Allocating 8 bytes for hash.
md: updating md0 RAID superblock on device
md: hdk1 [events: 00000067]<6>(write) hdk1's sb offset: 70559872
md: hdi1 [events: 00000067]<6>(write) hdi1's sb offset: 70559872
md: ... autorun DONE.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 2048 buckets, 32Kbytes
TCP: Hash tables configured (established 16384 bind 21845)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 336k freed
Adding Swap: 1574328k swap-space (priority -1)
Real Time Clock Driver v1.10e
loop: loaded (max 8 devices)
Linux agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 439M
agpgart: Detected Via Apollo Pro 266T chipset
agpgart: AGP aperture is 64M @ 0xd0000000
[drm] AGP 0.99 on VIA Apollo Pro 266T @ 0xd0000000 64MB
[drm] Initialized mga 3.0.2 20010321 on minor 0
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb-uhci.c: $Revision: 1.275 $ time 20:20:33 Feb 4 2003
usb-uhci.c: High bandwidth mode enabled
usb-uhci.c: USB UHCI at I/O 0xe000, IRQ 5
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
usb-uhci.c: USB UHCI at I/O 0xe400, IRQ 5
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 2
hub.c: USB hub found
hub.c: 2 ports detected
usb-uhci.c: USB UHCI at I/O 0xe800, IRQ 5
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 3
hub.c: USB hub found
hub.c: 2 ports detected
usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
usb.c: registered new driver usbscanner
scanner.c: 0.4.10:USB Scanner Driver
Initializing USB Mass Storage driver...
usb.c: registered new driver usb-storage
USB Mass Storage support registered.
NTFS driver v1.1.22 [Flags: R/O MODULE]
udf: registering filesystem
i2c-core.o: i2c core module
i2c-proc.o version 2.6.1 (20010825)
Journalled Block Device driver loaded
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,8), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,10), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
reiserfs: checking transaction log (device 03:0b) ...
Using r5 hash to sort names
ReiserFS version 3.6.25
reiserfs: checking transaction log (device 03:0c) ...
Using r5 hash to sort names
ReiserFS version 3.6.25
reiserfs: checking transaction log (device 09:00) ...
Using r5 hash to sort names
ReiserFS version 3.6.25
reiserfs: checking transaction log (device 09:01) ...
Using r5 hash to sort names
ReiserFS version 3.6.25
reiserfs: checking transaction log (device 21:01) ...
Using r5 hash to sort names
ReiserFS version 3.6.25
reiserfs: checking transaction log (device 21:02) ...
Using r5 hash to sort names
ReiserFS version 3.6.25
reiserfs: checking transaction log (device 21:41) ...
Using r5 hash to sort names
ReiserFS version 3.6.25
reiserfs: checking transaction log (device 21:42) ...
Using r5 hash to sort names
ReiserFS version 3.6.25
eth0: Setting full-duplex based on MII#1 link partner capability of 05e1.
--
The Swedish Chef has been assimilated. "Borg borg borg!"
GNU/Linux 2.4.21-pre3-ac5 SMP/ReiserFS 2x2339 bogomips load av: 3.22 3.33 2.41
I gave 2.4.21-pre4-ac2 a spin.
IDE seems to be shaping up, the only problem I ran into with
it is about the darn PDC20268 -- again. It seems to work nicely
but misdetects the max transfer rate of the only drive on the
secondary channel and then won't allow me to set UDMA > 2 on it
(I get no error msg but there's no change).
The ideX=ata66 switch doesn't seem to do anything any more.
(On 2.4.{19,20} if I omit "ide2=ata66 ide3=ata66", I get
the UDMA <= 2 restriction on *both* channels of the PDC.)
hdparm -Iv of the affected drive (from 2.4.20):
/dev/hdg:
multcount = 0 (off)
IO_support = 1 (32-bit)
unmaskirq = 1 (on)
using_dma = 1 (on)
keepsettings = 0 (off)
readonly = 0 (off)
readahead = 8 (on)
geometry = 1869/255/63, sectors = 30033360, start = 0
ATA device, with non-removable media
Model Number: IBM-DJNA-351520
Serial Number: G80GLT4F735
Firmware Revision: J56OA30K
Standards:
Used: ATA/ATAPI-4 T13 1153D revision 17
Supported: 4 3 2 1 & some of 5
Configuration:
Logical max current
cylinders 16383 16383
heads 16 16
sectors/track 63 63
--
CHS current addressable sectors: 16514064
LBA user addressable sectors: 30033360
device size with M = 1024*1024: 14664 MBytes
device size with M = 1000*1000: 15377 MBytes (15 GB)
Capabilities:
LBA, IORDY(can be disabled)
Buffer size: 430.0kB bytes avail on r/w long: 34 Queue depth: 32
Standby timer values: spec'd by Standard, no device specific minimum
R/W multiple sector transfer: Max = 16 Current = 0
DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 *udma4
Cycle time: min=120ns recommended=120ns
PIO: pio0 pio1 pio2 pio3 pio4
Cycle time: no flow control=240ns IORDY flow control=120ns
Commands/features:
Enabled Supported:
* NOP cmd
* READ BUFFER cmd
* WRITE BUFFER cmd
* Host Protected Area feature set
Release interrupt
* Look-ahead
* Write cache
* Power Management feature set
Security Mode feature set
* SMART feature set
Address Offset Reserved Area Boot
* READ/WRITE DMA QUEUED
* DOWNLOAD MICROCODE cmd
Security:
supported
not enabled
not locked
not frozen
not expired: security count
not supported: enhanced erase
26min for SECURITY ERASE UNIT.
Compare:
Linux version 2.4.21-pre4-ac2 (kala@ns) (gcc version 2.95.3 20010315 (release)) #1 Wed Feb 5 06:50:14 CET 2003
...
Kernel command line: auto BOOT_IMAGE=l rw root=900
Uniform Multi-Platform E-IDE driver Revision: 7.00beta-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
PIIX3: IDE controller at PCI slot 00:04.1
PCI: Enabling device 00:04.1 (0000 -> 0001)
PIIX3: chipset revision 0
PIIX3: not 100% native mode: will probe irqs later
PIIX3: neither IDE port enabled (BIOS)
PDC20268: IDE controller at PCI slot 00:06.0
PDC20268: chipset revision 2
PDC20268: not 100% native mode: will probe irqs later
ide2: BM-DMA at 0xf8b0-0xf8b7, BIOS settings: hde:pio, hdf:pio
ide3: BM-DMA at 0xf8b8-0xf8bf, BIOS settings: hdg:pio, hdh:pio
hde: WDC WD205BA, ATA DISK drive
blk: queue c02abf60, I/O limit 4095Mb (mask 0xffffffff)
hdg: IBM-DJNA-351520, ATA DISK drive
blk: queue c02ac3d0, I/O limit 4095Mb (mask 0xffffffff)
ide2 at 0xf898-0xf89f,0xf8aa on irq 9
ide3 at 0xf8a0-0xf8a7,0xf8ae on irq 9
hde: host protected area => 1
hde: 40088160 sectors (20525 MB) w/2048KiB Cache, CHS=39770/16/63, UDMA(66)
hdg: host protected area => 1
hdg: 30033360 sectors (15377 MB) w/430KiB Cache, CHS=29795/16/63, UDMA(33)
^^
vs.
Linux version 2.4.21-pre4-2420ide-1 (kala@ns) (gcc version 2.95.3 20010315 (release)) #1 Wed Jan 29 11:27:16 CET 2003
...
Kernel command line: auto BOOT_IMAGE=l rw root=900 ide2=ata66 ide3=ata66
ide_setup: ide2=ata66
ide_setup: ide3=ata66
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
PIIX3: IDE controller on PCI bus 00 dev 21
PCI: Enabling device 00:04.1 (0000 -> 0001)
PIIX3: chipset revision 0
PIIX3: not 100% native mode: will probe irqs later
PIIX3: neither IDE port enabled (BIOS)
PDC20268: IDE controller on PCI bus 00 dev 30
PDC20268: chipset revision 2
PDC20268: not 100% native mode: will probe irqs later
PDC20268: (U)DMA Burst Bit DISABLED Primary PCI Mode Secondary PCI Mode.
PDC20268: ATA-66/100 forced bit set (WARNING)!!
ide2: BM-DMA at 0xf8b0-0xf8b7, BIOS settings: hde:pio, hdf:pio
PDC20268: ATA-66/100 forced bit set (WARNING)!!
ide3: BM-DMA at 0xf8b8-0xf8bf, BIOS settings: hdg:pio, hdh:pio
hde: WDC WD205BA, ATA DISK drive
hdg: IBM-DJNA-351520, ATA DISK drive
ide2 at 0xf898-0xf89f,0xf8aa on irq 9
ide3 at 0xf8a0-0xf8a7,0xf8ae on irq 9
blk: queue c029d38c, I/O limit 4095Mb (mask 0xffffffff)
hde: 40088160 sectors (20525 MB) w/2048KiB Cache, CHS=39770/16/63, UDMA(66)
blk: queue c029d6f0, I/O limit 4095Mb (mask 0xffffffff)
hdg: 30033360 sectors (15377 MB) w/430KiB Cache, CHS=29795/16/63, UDMA(66)
T.
> but misdetects the max transfer rate of the only drive on the
> secondary channel and then won't allow me to set UDMA > 2 on it
> (I get no error msg but there's no change).
The 20268 code explicitly enforces that rule. I need to talk to Andre
to find out exactly why. It is being done intentionally
> I did a test to see if the drive was the issue and removed it. The
> system still hung.
>
> flushing ide devices: hda hdc hde _
I've had several reports of this now. It looks like I have a deadlock
when actually deciding to flush IDE caches.
> [[email protected]]
>
> > but misdetects the max transfer rate of the only drive on the
> > secondary channel and then won't allow me to set UDMA > 2 on it
> > (I get no error msg but there's no change).
>
> The 20268 code explicitly enforces that rule. I need to talk to Andre
> to find out exactly why. It is being done intentionally
Hmm, could you point me to the code in question?
I can't find it. Thanks.
--
Tomas Szepe <[email protected]>
> > The 20268 code explicitly enforces that rule. I need to talk to Andre
> > to find out exactly why. It is being done intentionally
>
> Hmm, could you point me to the code in question?
> I can't find it. Thanks.
Hash collision, I was remembering something else. The 20268 should be
setting up ATA66/100 unless the drive matches the blacklist
On Wed, 5 Feb 2003, about 2.4.21-pre4-ac2, Jurriaan wrote:
> Some of these may be responsible for something new: my system hangs at shutdown,
> saying 'flushing ide devices: hda hdc'. This didn't happen with
> 2.4.21pre3-ac5. hdc is a cdwriter, used as ide-scsi.
same thing for me:
2.4.21-pre4-ac1 seems the most stable ever for my hardware (not a single
hang or freeze, any other kernel would freeze more or less once a day)
but still needs longer testing for validation regarding my troubles.
2.4.21-pre4-ac2 systematically hangs at shutdown/reboot ending with:
flushing ide devices: hda hdc
here below my lspci / hdparm -I / /proc/interrupts / /proc/pci
**************************************************************************
3 [15:54] sjd@mint:/home/jd# lspci
00:00.0 Host bridge: Intel Corp. 82845G/GL [Brookdale-G] Chipset Host Bridge (rev 02)
00:01.0 PCI bridge: Intel Corp. 82845G/GL [Brookdale-G] Chipset AGP Bridge (rev 02)
00:1e.0 PCI bridge: Intel Corp. 82801BA/CA/DB PCI Bridge (rev 82)
00:1f.0 ISA bridge: Intel Corp. 82801DB ISA Bridge (LPC) (rev 02)
00:1f.1 IDE interface: Intel Corp. 82801DB ICH4 IDE (rev 02)
00:1f.5 Multimedia audio controller: Intel Corp. 82801DB AC'97 Audio (rev 02)
01:00.0 VGA compatible controller: nVidia Corporation NV25 [GeForce4 Ti4200] (rev a3)
02:03.0 FireWire (IEEE 1394): VIA Technologies, Inc. IEEE 1394 Host Controller (rev 80)
02:0b.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
**************************************************************************
4 [15:55] sjd@mint:/home/jd# hdparm -I /dev/hda
/dev/hda:
non-removable ATA device, with non-removable media
Model Number: Maxtor 6Y120P0
Serial Number: Y40FKPWE
Firmware Revision: YAR41VW0
Standards:
Supported: 1 2 3 4 5 6 7
Likely used: 7
Configuration:
Logical max current
cylinders 16383 16383
heads 16 16
sectors/track 63 63
bytes/track: 0 (obsolete)
bytes/sector: 0 (obsolete)
current sector capacity: 16514064
LBA user addressable sectors = 240121728
Capabilities:
LBA, IORDY(can be disabled)
Buffer size: 7936.0kB ECC bytes: 57 Queue depth: 1
Standby timer values: spec'd by standard, no device specific minimum
r/w multiple sector transfer: Max = 16 Current = 16
DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 *udma5 udma6
Cycle time: min=120ns recommended=120ns
PIO: pio0 pio1 pio2 pio3 pio4
Cycle time: no flow control=120ns IORDY flow control=120ns
Commands/features:
Enabled Supported:
* NOP cmd
* READ BUFFER cmd
* WRITE BUFFER cmd
* Host Protected Area feature set
* look-ahead
* write cache
* Power Management feature set
Security Mode feature set
SMART feature set
SET MAX security extension
Advanced Power Management feature set
* DOWNLOAD MICROCODE cmd
Security:
Master password revision code = 65534
supported
not enabled
not locked
not frozen
not expired: security count
not supported: enhanced erase
HW reset results:
CBLID- above Vih
Device num = 0 determined by the jumper
Checksum: correct
**************************************************************************
5 [15:55] sjd@mint:/home/jd# hdparm -I /dev/hdc
/dev/hdc:
ATAPI CD-ROM, with removable media
Model Number: JLMS DVD-ROM LTD-166S
Serial Number:
Firmware Revision: DS0B
Standards:
Used: ATAPI for CD-ROMs, SFF-8020i, r2.5
Supported: CD-ROM ATAPI-2
Configuration:
DRQ response: 50us.
Packet size: 12 bytes
Capabilities:
LBA, IORDY(cannot be disabled)
DMA: mdma0 mdma1 mdma2 udma0 udma1 *udma2 udma3
Cycle time: min=120ns recommended=120ns
PIO: pio0 pio1 pio2 pio3 pio4
Cycle time: no flow control=227ns IORDY flow control=120ns
**************************************************************************
6 [15:56] sjd@mint:/home/jd# cat /proc/interrupts
CPU0
0: 62486 XT-PIC timer
1: 3195 XT-PIC keyboard
2: 0 XT-PIC cascade
5: 11820 XT-PIC eth0, Intel ICH4
10: 1 XT-PIC ohci1394
11: 45676 XT-PIC nvidia
12: 15124 XT-PIC PS/2 Mouse
14: 11519 XT-PIC ide0
15: 16 XT-PIC ide1
NMI: 0
LOC: 62452
ERR: 0
MIS: 0
**************************************************************************
7 [15:56] sjd@mint:/home/jd# cat /proc/pci
PCI devices found:
Bus 0, device 0, function 0:
Host bridge: Intel Corp. 82845G/GL [Brookdale-G] Chipset Host Bridge (rev 2).
Prefetchable 32 bit memory at 0xf0000000 [0xf7ffffff].
Bus 0, device 1, function 0:
PCI bridge: Intel Corp. 82845G/GL [Brookdale-G] Chipset AGP Bridge (rev 2).
Master Capable. Latency=64. Min Gnt=8.
Bus 0, device 30, function 0:
PCI bridge: Intel Corp. 82801BA/CA/DB PCI Bridge (rev 130).
Master Capable. No bursts. Min Gnt=6.
Bus 0, device 31, function 0:
ISA bridge: Intel Corp. 82801DB ISA Bridge (LPC) (rev 2).
Bus 0, device 31, function 1:
IDE interface: Intel Corp. 82801DB ICH4 IDE (rev 2).
IRQ 9.
I/O at 0xf000 [0xf00f].
Non-prefetchable 32 bit memory at 0x10000000 [0x100003ff].
Bus 0, device 31, function 5:
Multimedia audio controller: Intel Corp. 82801DB AC'97 Audio (rev 2).
IRQ 5.
I/O at 0xa800 [0xa8ff].
I/O at 0xa400 [0xa43f].
Non-prefetchable 32 bit memory at 0xe4000000 [0xe40001ff].
Non-prefetchable 32 bit memory at 0xe3800000 [0xe38000ff].
Bus 1, device 0, function 0:
VGA compatible controller: nVidia Corporation NV25 [GeForce4 Ti4200] (rev 163).
IRQ 11.
Master Capable. Latency=248. Min Gnt=5.Max Lat=1.
Non-prefetchable 32 bit memory at 0xe6000000 [0xe6ffffff].
Prefetchable 32 bit memory at 0xe8000000 [0xefffffff].
Prefetchable 32 bit memory at 0xe7800000 [0xe787ffff].
Bus 2, device 3, function 0:
FireWire (IEEE 1394): VIA Technologies, Inc. IEEE 1394 Host Controller (rev 128).
IRQ 10.
Master Capable. Latency=32. Max Lat=32.
Non-prefetchable 32 bit memory at 0xe5000000 [0xe50007ff].
I/O at 0xb800 [0xb87f].
Bus 2, device 11, function 0:
Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 16).
IRQ 5.
Master Capable. Latency=32. Min Gnt=32.Max Lat=64.
I/O at 0xb400 [0xb4ff].
Non-prefetchable 32 bit memory at 0xe4800000 [0xe48000ff].
--
Quand les plombs p?tent : ? ??sj???t.??? ?