Hi,
I have a Tyan Bigby-P S5217, with a stock debian 2.6.31 kernel, which
apparently doesn't "see" the cards I plug (it sees its internal
peripherals fine).
I first plugged a wifi PCI card into a PCI-X slot (there's no PCI slot),
it didn't appear in lspci. As I thought it was a voltage problem (PCI-X
only accept 3.3v, not 5v IIRC) I bought a PCI-E one.
It's still not seen in lspci.
The only maybe-kind-of relevant things I see in dmesg are:
[ 0.162705] PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 16
[ 0.164635] PCI: BIOS Bug: MCFG area at f0000000 is not reserved in ACPI motherboard resources
[ 0.164722] PCI: Not using MMCONFIG.
[ 0.184095] PCI: Using ACPI for IRQ routing
[ 0.184098] pci 0000:00:1c.0: BAR 13: can't allocate resource
Does anyone know what I can do to pinpoint the problem ?
Thanks,
Xav
PS: lspci & dmesg follow, please Cc: me on answers.
00:00.0 Host bridge: Intel Corporation 3200/3210 Chipset DRAM Controller (rev 01)
00:1a.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 02)
00:1a.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 02)
00:1a.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 02)
00:1a.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 02)
00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 02)
00:1c.4 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 5 (rev 02)
00:1c.5 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 6 (rev 02)
00:1d.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 02)
00:1d.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 02)
00:1d.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 02)
00:1d.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 92)
00:1f.0 ISA bridge: Intel Corporation 82801IR (ICH9R) LPC Interface Controller (rev 02)
00:1f.2 SATA controller: Intel Corporation 82801IR/IO/IH (ICH9R/DO/DH) 6 port SATA AHCI Controller (rev 02)
00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 02)
00:1f.6 Signal processing controller: Intel Corporation 82801I (ICH9 Family) Thermal Subsystem (rev 02)
0d:00.0 Ethernet controller: Intel Corporation 82573L Gigabit Ethernet Controller
0f:00.0 Ethernet controller: Intel Corporation 82573L Gigabit Ethernet Controller
11:03.0 VGA compatible controller: ATI Technologies Inc ES1000 (rev 02)
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.31-1-amd64 (Debian 2.6.31-2) ([email protected]) (gcc version 4.3.4 (Debian 4.3.4-6) ) #1 SMP Sun Nov 15 22:05:44 UTC 2009
[ 0.000000] Command line: root=/dev/md1 ro
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009e800 (usable)
[ 0.000000] BIOS-e820: 000000000009e800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000dfed0000 (usable)
[ 0.000000] BIOS-e820: 00000000dfed0000 - 00000000dfede000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000dfede000 - 00000000dfedf000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000dfedf000 - 00000000e0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000120000000 (usable)
[ 0.000000] DMI present.
[ 0.000000] Phoenix BIOS detected: BIOS may corrupt low RAM, working around it.
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0x120000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CBFFF write-protect
[ 0.000000] CC000-DFFFF uncachable
[ 0.000000] E0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 080000000 mask FC0000000 write-back
[ 0.000000] 2 base 0C0000000 mask FE0000000 write-back
[ 0.000000] 3 base 100000000 mask FE0000000 write-back
[ 0.000000] 4 base 0DFF00000 mask FFFF00000 uncachable
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 00000000dff00000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0xdfed0 max_arch_pfn = 0x400000000
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000dfed0000
[ 0.000000] 0000000000 - 00dfe00000 page 2M
[ 0.000000] 00dfe00000 - 00dfed0000 page 4k
[ 0.000000] kernel direct mapping tables up to dfed0000 @ 10000-16000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000120000000
[ 0.000000] 0100000000 - 0120000000 page 2M
[ 0.000000] kernel direct mapping tables up to 120000000 @ 14000-1a000
[ 0.000000] RAMDISK: 37760000 - 37fef1bc
[ 0.000000] ACPI: RSDP 00000000000f6d70 00024 (v02 PTLTD )
[ 0.000000] ACPI: XSDT 00000000dfed3f2f 0008C (v01 PTLTD XSDT 06040000 LTP 00000000)
[ 0.000000] ACPI: FACP 00000000dfedde40 000F4 (v03 INTEL Bigby 06040000 PTL 00000002)
[ 0.000000] ACPI: DSDT 00000000dfed7fa7 05E15 (v01 INTEL BIGBY 06040000 MSFT 0100000E)
[ 0.000000] ACPI: FACS 00000000dfedefc0 00040
[ 0.000000] ACPI: MCFG 00000000dfeddf34 0003C (v01 PTLTD MCFG 06040000 LTP 00000000)
[ 0.000000] ACPI: APIC 00000000dfeddf70 00068 (v01 PTLTD APIC 06040000 LTP 00000000)
[ 0.000000] ACPI: BOOT 00000000dfeddfd8 00028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001)
[ 0.000000] ACPI: SSDT 00000000dfed582e 0025F (v01 PmRef Cpu0Tst 00003000 INTL 20050228)
[ 0.000000] ACPI: SSDT 00000000dfed5788 000A6 (v01 PmRef Cpu7Tst 00003000 INTL 20050228)
[ 0.000000] ACPI: SSDT 00000000dfed56e2 000A6 (v01 PmRef Cpu6Tst 00003000 INTL 20050228)
[ 0.000000] ACPI: SSDT 00000000dfed563c 000A6 (v01 PmRef Cpu5Tst 00003000 INTL 20050228)
[ 0.000000] ACPI: SSDT 00000000dfed5596 000A6 (v01 PmRef Cpu4Tst 00003000 INTL 20050228)
[ 0.000000] ACPI: SSDT 00000000dfed54f0 000A6 (v01 PmRef Cpu3Tst 00003000 INTL 20050228)
[ 0.000000] ACPI: SSDT 00000000dfed544a 000A6 (v01 PmRef Cpu2Tst 00003000 INTL 20050228)
[ 0.000000] ACPI: SSDT 00000000dfed53a4 000A6 (v01 PmRef Cpu1Tst 00003000 INTL 20050228)
[ 0.000000] ACPI: SSDT 00000000dfed3fbb 013E9 (v01 PmRef CpuPm 00003000 INTL 20050228)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-0000000120000000
[ 0.000000] Bootmem setup node 0 0000000000000000-0000000120000000
[ 0.000000] NODE_DATA [0000000000015000 - 000000000001cfff]
[ 0.000000] bootmap [000000000001d000 - 0000000000040fff] pages 24
[ 0.000000] (8 early reservations) ==> bootmem [0000000000 - 0120000000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
[ 0.000000] #2 [0001000000 - 0001631d2c] TEXT DATA BSS ==> [0001000000 - 0001631d2c]
[ 0.000000] #3 [0037760000 - 0037fef1bc] RAMDISK ==> [0037760000 - 0037fef1bc]
[ 0.000000] #4 [000009e800 - 0000100000] BIOS reserved ==> [000009e800 - 0000100000]
[ 0.000000] #5 [0001632000 - 0001632174] BRK ==> [0001632000 - 0001632174]
[ 0.000000] #6 [0000010000 - 0000014000] PGTABLE ==> [0000010000 - 0000014000]
[ 0.000000] #7 [0000014000 - 0000015000] PGTABLE ==> [0000014000 - 0000015000]
[ 0.000000] found SMP MP-table at [ffff8800000f6da0] f6da0
[ 0.000000] [ffffea0000000000-ffffea0003ffffff] PMD -> [ffff880028600000-ffff88002bffffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00120000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009e
[ 0.000000] 0: 0x00000100 -> 0x000dfed0
[ 0.000000] 0: 0x00100000 -> 0x00120000
[ 0.000000] On node 0 totalpages: 1048158
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 105 pages reserved
[ 0.000000] DMA zone: 3821 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 898824 pages, LIFO batch:31
[ 0.000000] Normal zone: 1792 pages used for memmap
[ 0.000000] Normal zone: 129280 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 000000000009f000
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000dfed0000 - 00000000dfede000
[ 0.000000] PM: Registered nosave memory: 00000000dfede000 - 00000000dfedf000
[ 0.000000] PM: Registered nosave memory: 00000000dfedf000 - 00000000e0000000
[ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec10000
[ 0.000000] PM: Registered nosave memory: 00000000fec10000 - 00000000fee00000
[ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ff000000
[ 0.000000] PM: Registered nosave memory: 00000000ff000000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at e0000000 (gap: e0000000:1ec00000)
[ 0.000000] NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 29 pages at ffff88002801f000, static data 86368 bytes
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1031925
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: root=/dev/md1 ro
[ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.000000] Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000
[ 0.000000] software IO TLB at phys 0x20000000 - 0x24000000
[ 0.000000] Memory: 4051700k/4718592k available (2947k kernel code, 525960k absent, 140932k reserved, 1661k data, 648k init)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:4352 nr_irqs:424
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2393.470 MHz processor.
[ 0.004000] Console: colour VGA+ 80x25
[ 0.004000] console [tty0] enabled
[ 0.004010] Calibrating delay loop (skipped), value calculated using timer frequency.. 4786.94 BogoMIPS (lpj=9573880)
[ 0.004218] Security Framework initialized
[ 0.004286] SELinux: Disabled at boot.
[ 0.004684] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.007008] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.008202] Mount-cache hash table entries: 256
[ 0.008421] Initializing cgroup subsys ns
[ 0.008489] Initializing cgroup subsys cpuacct
[ 0.008555] Initializing cgroup subsys devices
[ 0.008621] Initializing cgroup subsys freezer
[ 0.008686] Initializing cgroup subsys net_cls
[ 0.008776] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.008884] CPU: L2 cache: 2048K
[ 0.008948] CPU 0/0x0 -> Node 0
[ 0.009011] CPU: Physical Processor ID: 0
[ 0.009075] CPU: Processor Core ID: 0
[ 0.009140] mce: CPU supports 6 MCE banks
[ 0.009208] CPU0: Thermal monitoring handled by SMI
[ 0.009211] using mwait in idle threads.
[ 0.009275] Performance Counters: Core2 events, Intel PMU driver.
[ 0.009432] ... version: 2
[ 0.009496] ... bit width: 40
[ 0.009560] ... generic counters: 2
[ 0.009624] ... value mask: 000000ffffffffff
[ 0.009690] ... max period: 000000007fffffff
[ 0.009757] ... fixed-purpose counters: 3
[ 0.009821] ... counter mask: 0000000700000003
[ 0.010764] ACPI: Core revision 20090521
[ 0.020058] Setting APIC routing to flat
[ 0.020436] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.061199] CPU0: Intel(R) Core(TM)2 Duo CPU E4600 @ 2.40GHz stepping 0d
[ 0.064001] Booting processor 1 APIC 0x1 ip 0x6000
[ 0.004000] Initializing CPU#1
[ 0.004000] Calibrating delay using timer specific routine.. 4788.23 BogoMIPS (lpj=9576478)
[ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.004000] CPU: L2 cache: 2048K
[ 0.004000] CPU 1/0x1 -> Node 0
[ 0.004000] CPU: Physical Processor ID: 0
[ 0.004000] CPU: Processor Core ID: 1
[ 0.004000] mce: CPU supports 6 MCE banks
[ 0.004000] CPU1: Thermal monitoring enabled (TM2)
[ 0.004000] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
[ 0.149291] CPU1: Intel(R) Core(TM)2 Duo CPU E4600 @ 2.40GHz stepping 0d
[ 0.150108] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.152026] Brought up 2 CPUs
[ 0.152091] Total of 2 processors activated (9575.17 BogoMIPS).
[ 0.152220] CPU0 attaching sched-domain:
[ 0.152223] domain 0: span 0-1 level MC
[ 0.152225] groups: 0 1
[ 0.152229] CPU1 attaching sched-domain:
[ 0.152231] domain 0: span 0-1 level MC
[ 0.152233] groups: 1 0
[ 0.152298] Booting paravirtualized kernel on bare hardware
[ 0.152298] regulator: core version 0.5
[ 0.152298] NET: Registered protocol family 16
[ 0.152304] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.152390] ACPI: bus type pci registered
[ 0.152517] PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 16
[ 0.152587] PCI: Not using MMCONFIG.
[ 0.152651] PCI: Using configuration type 1 for base access
[ 0.156332] bio: create slab <bio-0> at 0
[ 0.156498] ACPI: EC: Look up EC in DSDT
[ 0.162244] ACPI: Interpreter enabled
[ 0.162310] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.162605] ACPI: Using IOAPIC for interrupt routing
[ 0.162705] PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 16
[ 0.164635] PCI: BIOS Bug: MCFG area at f0000000 is not reserved in ACPI motherboard resources
[ 0.164722] PCI: Not using MMCONFIG.
[ 0.168525] ACPI: No dock devices found.
[ 0.169496] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.169689] pci 0000:00:1a.0: reg 20 io port: [0x1820-0x183f]
[ 0.169768] pci 0000:00:1a.1: reg 20 io port: [0x1840-0x185f]
[ 0.169844] pci 0000:00:1a.2: reg 20 io port: [0x1860-0x187f]
[ 0.169914] pci 0000:00:1a.7: reg 10 32bit mmio: [0xe8501800-0xe8501bff]
[ 0.169967] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.170038] pci 0000:00:1a.7: PME# disabled
[ 0.170158] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.170228] pci 0000:00:1c.0: PME# disabled
[ 0.170349] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.170419] pci 0000:00:1c.4: PME# disabled
[ 0.170538] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 0.170608] pci 0000:00:1c.5: PME# disabled
[ 0.170722] pci 0000:00:1d.0: reg 20 io port: [0x1880-0x189f]
[ 0.170803] pci 0000:00:1d.1: reg 20 io port: [0x18a0-0x18bf]
[ 0.170879] pci 0000:00:1d.2: reg 20 io port: [0x18c0-0x18df]
[ 0.170949] pci 0000:00:1d.7: reg 10 32bit mmio: [0xe8501c00-0xe8501fff]
[ 0.171001] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.171072] pci 0000:00:1d.7: PME# disabled
[ 0.171254] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
[ 0.171259] pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
[ 0.171346] pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH6 GPIO
[ 0.171417] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0600 (mask 007f)
[ 0.171504] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0ca0 (mask 000f)
[ 0.171648] pci 0000:00:1f.2: reg 10 io port: [0x1c78-0x1c7f]
[ 0.171653] pci 0000:00:1f.2: reg 14 io port: [0x1c6c-0x1c6f]
[ 0.171658] pci 0000:00:1f.2: reg 18 io port: [0x1c70-0x1c77]
[ 0.171664] pci 0000:00:1f.2: reg 1c io port: [0x1c68-0x1c6b]
[ 0.171669] pci 0000:00:1f.2: reg 20 io port: [0x18e0-0x18ff]
[ 0.171675] pci 0000:00:1f.2: reg 24 32bit mmio: [0xe8501000-0xe85017ff]
[ 0.171705] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.171773] pci 0000:00:1f.2: PME# disabled
[ 0.171864] pci 0000:00:1f.3: reg 10 64bit mmio: [0xe8502000-0xe85020ff]
[ 0.171877] pci 0000:00:1f.3: reg 20 io port: [0x1c00-0x1c1f]
[ 0.171926] pci 0000:00:1f.6: reg 10 64bit mmio: [0xe8500000-0xe8500fff]
[ 0.172023] pci 0000:00:1c.0: bridge io port: [0x00-0xfff]
[ 0.172091] pci 0000:0d:00.0: reg 10 32bit mmio: [0xe8080000-0xe809ffff]
[ 0.172102] pci 0000:0d:00.0: reg 14 32bit mmio: [0xe8000000-0xe807ffff]
[ 0.172113] pci 0000:0d:00.0: reg 18 io port: [0x2000-0x201f]
[ 0.172197] pci 0000:0d:00.0: PME# supported from D0 D3hot D3cold
[ 0.172270] pci 0000:0d:00.0: PME# disabled
[ 0.172383] pci 0000:00:1c.4: bridge io port: [0x2000-0x2fff]
[ 0.172387] pci 0000:00:1c.4: bridge 32bit mmio: [0xe8000000-0xe80fffff]
[ 0.172452] pci 0000:0f:00.0: reg 10 32bit mmio: [0xe8180000-0xe819ffff]
[ 0.172463] pci 0000:0f:00.0: reg 14 32bit mmio: [0xe8100000-0xe817ffff]
[ 0.172474] pci 0000:0f:00.0: reg 18 io port: [0x3000-0x301f]
[ 0.172557] pci 0000:0f:00.0: PME# supported from D0 D3hot D3cold
[ 0.172630] pci 0000:0f:00.0: PME# disabled
[ 0.172743] pci 0000:00:1c.5: bridge io port: [0x3000-0x3fff]
[ 0.172747] pci 0000:00:1c.5: bridge 32bit mmio: [0xe8100000-0xe81fffff]
[ 0.172789] pci 0000:11:03.0: reg 10 32bit mmio: [0xe0000000-0xe7ffffff]
[ 0.172796] pci 0000:11:03.0: reg 14 io port: [0x4000-0x40ff]
[ 0.172802] pci 0000:11:03.0: reg 18 32bit mmio: [0xe8200000-0xe820ffff]
[ 0.172823] pci 0000:11:03.0: reg 30 32bit mmio: [0x000000-0x01ffff]
[ 0.172842] pci 0000:11:03.0: supports D1 D2
[ 0.172883] pci 0000:00:1e.0: transparent bridge
[ 0.172951] pci 0000:00:1e.0: bridge io port: [0x4000-0x4fff]
[ 0.172954] pci 0000:00:1e.0: bridge 32bit mmio: [0xe8200000-0xe82fffff]
[ 0.172960] pci 0000:00:1e.0: bridge 64bit mmio pref: [0xe0000000-0xe7ffffff]
[ 0.172979] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.173218] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
[ 0.173291] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP5._PRT]
[ 0.173356] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP6._PRT]
[ 0.173433] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[ 0.178179] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.178845] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.179511] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 0.180180] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.180950] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.181720] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.182490] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.183159] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.183926] usbcore: registered new interface driver usbfs
[ 0.184015] usbcore: registered new interface driver hub
[ 0.184091] usbcore: registered new device driver usb
[ 0.184095] PCI: Using ACPI for IRQ routing
[ 0.184098] pci 0000:00:1c.0: BAR 13: can't allocate resource
[ 0.192140] hpet clockevent registered
[ 0.192145] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 0.192237] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.192521] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 0.208092] pnp: PnP ACPI init
[ 0.208173] ACPI: bus type pnp registered
[ 0.210720] pnp: PnP ACPI: found 10 devices
[ 0.210786] ACPI: ACPI bus type pnp unregistered
[ 0.210860] system 00:01: ioport range 0x600-0x63f has been reserved
[ 0.210930] system 00:01: ioport range 0x800-0x80f has been reserved
[ 0.211000] system 00:01: ioport range 0xca0-0xcaf has been reserved
[ 0.211069] system 00:01: ioport range 0x1000-0x107f has been reserved
[ 0.211139] system 00:01: ioport range 0x1180-0x11bf has been reserved
[ 0.211209] system 00:01: ioport range 0x4d0-0x4d1 has been reserved
[ 0.211279] system 00:01: ioport range 0xfe00-0xfe00 has been reserved
[ 0.211349] system 00:01: iomem range 0xfed14000-0xfed17fff has been reserved
[ 0.211420] system 00:01: iomem range 0xf8000000-0xfbffffff has been reserved
[ 0.211492] system 00:01: iomem range 0xfed20000-0xfed8ffff has been reserved
[ 0.211563] system 00:01: iomem range 0xfef00000-0xfeffffff has been reserved
[ 0.216316] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:05
[ 0.216385] pci 0000:00:1c.0: IO window: disabled
[ 0.216454] pci 0000:00:1c.0: MEM window: disabled
[ 0.216522] pci 0000:00:1c.0: PREFETCH window: disabled
[ 0.216591] pci 0000:00:1c.4: PCI bridge, secondary bus 0000:0d
[ 0.216660] pci 0000:00:1c.4: IO window: 0x2000-0x2fff
[ 0.216730] pci 0000:00:1c.4: MEM window: 0xe8000000-0xe80fffff
[ 0.216800] pci 0000:00:1c.4: PREFETCH window: disabled
[ 0.216869] pci 0000:00:1c.5: PCI bridge, secondary bus 0000:0f
[ 0.216937] pci 0000:00:1c.5: IO window: 0x3000-0x3fff
[ 0.217007] pci 0000:00:1c.5: MEM window: 0xe8100000-0xe81fffff
[ 0.217077] pci 0000:00:1c.5: PREFETCH window: disabled
[ 0.217148] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:11
[ 0.217217] pci 0000:00:1e.0: IO window: 0x4000-0x4fff
[ 0.217287] pci 0000:00:1e.0: MEM window: 0xe8200000-0xe82fffff
[ 0.217358] pci 0000:00:1e.0: PREFETCH window: 0x000000e0000000-0x000000e7ffffff
[ 0.217453] alloc irq_desc for 16 on node 0
[ 0.217455] alloc kstat_irqs on node 0
[ 0.217459] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.217532] pci 0000:00:1c.0: setting latency timer to 64
[ 0.217538] pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.217610] pci 0000:00:1c.4: setting latency timer to 64
[ 0.217616] alloc irq_desc for 17 on node 0
[ 0.217617] alloc kstat_irqs on node 0
[ 0.217620] pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.217691] pci 0000:00:1c.5: setting latency timer to 64
[ 0.217697] pci 0000:00:1e.0: setting latency timer to 64
[ 0.217701] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.217703] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
[ 0.217705] pci_bus 0000:05: resource 0 mem: [0x0-0xfff]
[ 0.217707] pci_bus 0000:0d: resource 0 io: [0x2000-0x2fff]
[ 0.217709] pci_bus 0000:0d: resource 1 mem: [0xe8000000-0xe80fffff]
[ 0.217711] pci_bus 0000:0f: resource 0 io: [0x3000-0x3fff]
[ 0.217713] pci_bus 0000:0f: resource 1 mem: [0xe8100000-0xe81fffff]
[ 0.217715] pci_bus 0000:11: resource 0 io: [0x4000-0x4fff]
[ 0.217717] pci_bus 0000:11: resource 1 mem: [0xe8200000-0xe82fffff]
[ 0.217720] pci_bus 0000:11: resource 2 pref mem [0xe0000000-0xe7ffffff]
[ 0.217722] pci_bus 0000:11: resource 3 io: [0x00-0xffff]
[ 0.217724] pci_bus 0000:11: resource 4 mem: [0x000000-0xffffffffffffffff]
[ 0.217777] NET: Registered protocol family 2
[ 0.218004] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.219308] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.223602] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.224228] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.224298] TCP reno registered
[ 0.224514] NET: Registered protocol family 1
[ 0.224638] Unpacking initramfs...
[ 0.405817] Freeing initrd memory: 8764k freed
[ 0.409841] Simple Boot Flag at 0x40 set to 0x80
[ 0.410269] audit: initializing netlink socket (disabled)
[ 0.410353] type=2000 audit(1260954508.408:1): initialized
[ 0.410847] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.411027] VFS: Disk quotas dquot_6.5.2
[ 0.411121] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.411239] msgmni has been set to 7930
[ 0.411450] alg: No test for stdrng (krng)
[ 0.411544] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.411630] io scheduler noop registered
[ 0.411694] io scheduler anticipatory registered
[ 0.411760] io scheduler deadline registered
[ 0.411840] io scheduler cfq registered (default)
[ 0.412070] pci 0000:11:03.0: Boot video device
[ 0.412218] alloc irq_desc for 24 on node 0
[ 0.412220] alloc kstat_irqs on node 0
[ 0.412234] pcieport-driver 0000:00:1c.0: irq 24 for MSI/MSI-X
[ 0.412249] pcieport-driver 0000:00:1c.0: setting latency timer to 64
[ 0.412370] alloc irq_desc for 25 on node 0
[ 0.412372] alloc kstat_irqs on node 0
[ 0.412382] pcieport-driver 0000:00:1c.4: irq 25 for MSI/MSI-X
[ 0.412393] pcieport-driver 0000:00:1c.4: setting latency timer to 64
[ 0.412512] alloc irq_desc for 26 on node 0
[ 0.412514] alloc kstat_irqs on node 0
[ 0.412524] pcieport-driver 0000:00:1c.5: irq 26 for MSI/MSI-X
[ 0.412535] pcieport-driver 0000:00:1c.5: setting latency timer to 64
[ 0.413596] Linux agpgart interface v0.103
[ 0.413729] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.414035] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.414555] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.414777] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[ 0.415004] PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
[ 0.417988] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.418125] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.418346] mice: PS/2 mouse device common for all mice
[ 0.418539] rtc_cmos 00:04: RTC can wake from S4
[ 0.418697] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 0.418868] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.419012] cpuidle: using governor ladder
[ 0.419144] cpuidle: using governor menu
[ 0.419278] No iBFT detected.
[ 0.419646] TCP cubic registered
[ 0.419820] NET: Registered protocol family 10
[ 0.420289] lo: Disabled Privacy Extensions
[ 0.420626] Mobile IPv6
[ 0.420756] NET: Registered protocol family 17
[ 0.420947] registered taskstats version 1
[ 0.421193] rtc_cmos 00:04: setting system clock to 2009-12-16 09:08:29 UTC (1260954509)
[ 0.421385] Freeing unused kernel memory: 648k freed
[ 0.421731] Write protecting the kernel read-only data: 4028k
[ 0.543565] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.543778] alloc irq_desc for 18 on node 0
[ 0.543781] alloc kstat_irqs on node 0
[ 0.543790] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.543949] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 0.543955] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 0.544161] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 0.548293] ehci_hcd 0000:00:1a.7: debug port 1
[ 0.548441] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[ 0.548467] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xe8501800
[ 0.565315] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 0.565485] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.565622] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.565773] usb usb1: Product: EHCI Host Controller
[ 0.565907] usb usb1: Manufacturer: Linux 2.6.31-1-amd64 ehci_hcd
[ 0.566034] usb usb1: SerialNumber: 0000:00:1a.7
[ 0.566215] usb usb1: configuration #1 chosen from 1 choice
[ 0.566368] hub 1-0:1.0: USB hub found
[ 0.566500] hub 1-0:1.0: 6 ports detected
[ 0.566955] SCSI subsystem initialized
[ 0.582520] e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k2
[ 0.582662] e1000e: Copyright (c) 1999-2008 Intel Corporation.
[ 0.585126] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.585437] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.585601] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 0.585608] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 0.585799] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 0.589866] ehci_hcd 0000:00:1d.7: debug port 1
[ 0.590014] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 0.590043] ehci_hcd 0000:00:1d.7: irq 16, io mem 0xe8501c00
[ 0.611270] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.611448] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.611583] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.611735] usb usb2: Product: EHCI Host Controller
[ 0.611869] usb usb2: Manufacturer: Linux 2.6.31-1-amd64 ehci_hcd
[ 0.612001] usb usb2: SerialNumber: 0000:00:1d.7
[ 0.612194] usb usb2: configuration #1 chosen from 1 choice
[ 0.612427] hub 2-0:1.0: USB hub found
[ 0.632774] libata version 3.00 loaded.
[ 0.634051] hub 2-0:1.0: 6 ports detected
[ 0.637524] e1000e 0000:0d:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.637664] e1000e 0000:0d:00.0: pci_enable_pcie_error_reporting failed 0xfffffffb
[ 0.637828] e1000e 0000:0d:00.0: setting latency timer to 64
[ 0.638184] alloc irq_desc for 27 on node 0
[ 0.638186] alloc kstat_irqs on node 0
[ 0.638221] e1000e 0000:0d:00.0: irq 27 for MSI/MSI-X
[ 0.638564] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.638706] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 0.638712] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 0.638931] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 0.639118] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001820
[ 0.639283] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.639412] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.639563] usb usb3: Product: UHCI Host Controller
[ 0.639696] usb usb3: Manufacturer: Linux 2.6.31-1-amd64 uhci_hcd
[ 0.639828] usb usb3: SerialNumber: 0000:00:1a.0
[ 0.640032] usb usb3: configuration #1 chosen from 1 choice
[ 0.640214] hub 3-0:1.0: USB hub found
[ 0.640383] hub 3-0:1.0: 2 ports detected
[ 0.640580] ahci 0000:00:1f.2: version 3.0
[ 0.640592] ahci 0000:00:1f.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.640746] alloc irq_desc for 28 on node 0
[ 0.640747] alloc kstat_irqs on node 0
[ 0.640757] ahci 0000:00:1f.2: irq 28 for MSI/MSI-X
[ 0.640828] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x35 impl SATA mode
[ 0.640982] ahci 0000:00:1f.2: flags: 64bit ncq sntf led clo pmp pio slum part
[ 0.641131] ahci 0000:00:1f.2: setting latency timer to 64
[ 0.641372] scsi0 : ahci
[ 0.641646] scsi1 : ahci
[ 0.641860] scsi2 : ahci
[ 0.642071] scsi3 : ahci
[ 0.642282] scsi4 : ahci
[ 0.642512] scsi5 : ahci
[ 0.642799] ata1: SATA max UDMA/133 abar m2048@0xe8501000 port 0xe8501100 irq 28
[ 0.642947] ata2: DUMMY
[ 0.643076] ata3: SATA max UDMA/133 abar m2048@0xe8501000 port 0xe8501200 irq 28
[ 0.643228] ata4: DUMMY
[ 0.643353] ata5: SATA max UDMA/133 abar m2048@0xe8501000 port 0xe8501300 irq 28
[ 0.643505] ata6: SATA max UDMA/133 abar m2048@0xe8501000 port 0xe8501380 irq 28
[ 0.643806] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.643954] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 0.643961] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 0.644162] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 0.644361] uhci_hcd 0000:00:1a.1: irq 17, io base 0x00001840
[ 0.644534] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.644671] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.644814] usb usb4: Product: UHCI Host Controller
[ 0.644947] usb usb4: Manufacturer: Linux 2.6.31-1-amd64 uhci_hcd
[ 0.645082] usb usb4: SerialNumber: 0000:00:1a.1
[ 0.645287] usb usb4: configuration #1 chosen from 1 choice
[ 0.645468] hub 4-0:1.0: USB hub found
[ 0.645599] hub 4-0:1.0: 2 ports detected
[ 0.645804] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.645945] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[ 0.645951] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 0.646137] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[ 0.646308] uhci_hcd 0000:00:1a.2: irq 18, io base 0x00001860
[ 0.646472] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.646606] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.646761] usb usb5: Product: UHCI Host Controller
[ 0.646894] usb usb5: Manufacturer: Linux 2.6.31-1-amd64 uhci_hcd
[ 0.647029] usb usb5: SerialNumber: 0000:00:1a.2
[ 0.647228] usb usb5: configuration #1 chosen from 1 choice
[ 0.647409] hub 5-0:1.0: USB hub found
[ 0.647538] hub 5-0:1.0: 2 ports detected
[ 0.647734] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.647878] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 0.647884] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.648070] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[ 0.648243] uhci_hcd 0000:00:1d.0: irq 16, io base 0x00001880
[ 0.648401] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.648527] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.648674] usb usb6: Product: UHCI Host Controller
[ 0.648807] usb usb6: Manufacturer: Linux 2.6.31-1-amd64 uhci_hcd
[ 0.648938] usb usb6: SerialNumber: 0000:00:1d.0
[ 0.649139] usb usb6: configuration #1 chosen from 1 choice
[ 0.649317] hub 6-0:1.0: USB hub found
[ 0.649454] hub 6-0:1.0: 2 ports detected
[ 0.649641] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.649785] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 0.649792] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.649980] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[ 0.650158] uhci_hcd 0000:00:1d.1: irq 17, io base 0x000018a0
[ 0.650326] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.650463] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.650613] usb usb7: Product: UHCI Host Controller
[ 0.650750] usb usb7: Manufacturer: Linux 2.6.31-1-amd64 uhci_hcd
[ 0.650887] usb usb7: SerialNumber: 0000:00:1d.1
[ 0.651105] usb usb7: configuration #1 chosen from 1 choice
[ 0.651286] hub 7-0:1.0: USB hub found
[ 0.651417] hub 7-0:1.0: 2 ports detected
[ 0.651808] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.651949] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 0.651956] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.652149] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[ 0.652384] uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018c0
[ 0.652537] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.652674] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.652826] usb usb8: Product: UHCI Host Controller
[ 0.652959] usb usb8: Manufacturer: Linux 2.6.31-1-amd64 uhci_hcd
[ 0.653090] usb usb8: SerialNumber: 0000:00:1d.2
[ 0.653291] usb usb8: configuration #1 chosen from 1 choice
[ 0.653458] hub 8-0:1.0: USB hub found
[ 0.653593] hub 8-0:1.0: 2 ports detected
[ 0.693411] e1000e 0000:0d:00.0: Warning: detected DSPD enabled in EEPROM
[ 0.710997] Switched to high resolution mode on CPU 1
[ 0.712782] Switched to high resolution mode on CPU 0
[ 0.753027] 0000:0d:00.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:e0:81:b2:63:ae
[ 0.753183] 0000:0d:00.0: eth0: Intel(R) PRO/1000 Network Connection
[ 0.753341] 0000:0d:00.0: eth0: MAC: 2, PHY: 2, PBA No: ffffff-0ff
[ 0.753639] e1000e 0000:0f:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.753776] e1000e 0000:0f:00.0: pci_enable_pcie_error_reporting failed 0xfffffffb
[ 0.753936] e1000e 0000:0f:00.0: setting latency timer to 64
[ 0.754288] alloc irq_desc for 29 on node 0
[ 0.754289] alloc kstat_irqs on node 0
[ 0.754322] e1000e 0000:0f:00.0: irq 29 for MSI/MSI-X
[ 0.808887] e1000e 0000:0f:00.0: Warning: detected DSPD enabled in EEPROM
[ 0.869812] 0000:0f:00.0: eth1: (PCI Express:2.5GB/s:Width x1) 00:e0:81:b2:63:af
[ 0.869960] 0000:0f:00.0: eth1: Intel(R) PRO/1000 Network Connection
[ 0.870125] 0000:0f:00.0: eth1: MAC: 2, PHY: 2, PBA No: ffffff-0ff
[ 1.109044] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.109203] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.109361] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.109501] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.110207] ata1.00: ATA-8: STM3500418AS, CC38, max UDMA/133
[ 1.110347] ata1.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 1.110533] ata6.00: ATA-6: ST31000340NS, SN04, max UDMA/133
[ 1.110556] ata3.00: ATA-8: STM3500418AS, CC38, max UDMA/133
[ 1.110560] ata3.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 1.110651] ata5.00: ATA-8: ST3500418AS, CC37, max UDMA/133
[ 1.110655] ata5.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 1.111173] ata6.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 1.111739] ata1.00: configured for UDMA/133
[ 1.111915] ata5.00: configured for UDMA/133
[ 1.112130] scsi 0:0:0:0: Direct-Access ATA STM3500418AS CC38 PQ: 0 ANSI: 5
[ 1.112402] ata3.00: configured for UDMA/133
[ 1.112574] scsi 2:0:0:0: Direct-Access ATA STM3500418AS CC38 PQ: 0 ANSI: 5
[ 1.112837] scsi 4:0:0:0: Direct-Access ATA ST3500418AS CC37 PQ: 0 ANSI: 5
[ 1.113016] ata6.00: configured for UDMA/133
[ 1.113317] scsi 5:0:0:0: Direct-Access ATA ST31000340NS SN04 PQ: 0 ANSI: 5
[ 1.117925] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 1.118118] sd 0:0:0:0: [sda] Write Protect is off
[ 1.118212] sd 2:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 1.118246] sd 2:0:0:0: [sdb] Write Protect is off
[ 1.118248] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.118266] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.118367] sdb:
[ 1.118506] sd 4:0:0:0: [sdc] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 1.118539] sd 4:0:0:0: [sdc] Write Protect is off
[ 1.118541] sd 4:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 1.118559] sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.118644] sdc:
[ 1.118682] sd 5:0:0:0: [sdd] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 1.118714] sd 5:0:0:0: [sdd] Write Protect is off
[ 1.118715] sd 5:0:0:0: [sdd] Mode Sense: 00 3a 00 00
[ 1.118733] sd 5:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.118817] sdd:
[ 1.119900] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.120061] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.120316] sda: sdb1 sdb2 sdb3 sdb4
[ 1.124658] sdc1 sdc2 sdc3 sdc4
[ 1.128885] sda1 sda2 sda3 sda4
[ 1.132101] sd 2:0:0:0: [sdb] Attached SCSI disk
[ 1.137104] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.138174] sdd1
[ 1.138628] sd 5:0:0:0: [sdd] Attached SCSI disk
[ 1.138642] sd 4:0:0:0: [sdc] Attached SCSI disk
[ 1.229141] usb 4-1: new low speed USB device using uhci_hcd and address 2
[ 1.355926] xor: automatically using best checksumming function: generic_sse
[ 1.373000] generic_sse: 8803.000 MB/sec
[ 1.373130] xor: using function: generic_sse (8803.000 MB/sec)
[ 1.373649] async_tx: api initialized (async)
[ 1.441008] raid6: int64x1 2012 MB/s
[ 1.509010] raid6: int64x2 2714 MB/s
[ 1.577022] raid6: int64x4 2105 MB/s
[ 1.645008] raid6: int64x8 1902 MB/s
[ 1.713008] raid6: sse2x1 3586 MB/s
[ 1.781009] raid6: sse2x2 4780 MB/s
[ 1.849006] raid6: sse2x4 7166 MB/s
[ 1.849137] raid6: using algorithm sse2x4 (7166 MB/s)
[ 1.854700] md: raid6 personality registered for level 6
[ 1.854821] md: raid5 personality registered for level 5
[ 1.854959] md: raid4 personality registered for level 4
[ 1.917405] md: md1 stopped.
[ 1.919576] md: bind<sdb2>
[ 1.920694] md: bind<sda2>
[ 1.921040] md: bind<sdc2>
[ 1.922546] raid5: device sdc2 operational as raid disk 0
[ 1.922672] raid5: device sda2 operational as raid disk 2
[ 1.922798] raid5: device sdb2 operational as raid disk 1
[ 1.923184] raid5: allocated 3228kB for md1
[ 1.923342] raid5: raid level 5 set md1 active with 3 out of 3 devices, algorithm 2
[ 1.923490] RAID5 conf printout:
[ 1.923612] --- rd:3 wd:3
[ 1.923730] disk 0, o:1, dev:sdc2
[ 1.923853] disk 1, o:1, dev:sdb2
[ 1.923979] disk 2, o:1, dev:sda2
[ 1.924137] md1: detected capacity change from 0 to 107389124608
[ 1.925244] md1: unknown partition table
[ 2.192846] EXT4-fs (md1): barriers enabled
[ 2.205256] kjournald2 starting: pid 453, dev md1:8, commit interval 5 seconds
[ 2.205431] EXT4-fs (md1): delayed allocation enabled
[ 2.205766] EXT4-fs: file extents enabled
[ 2.211754] EXT4-fs: mballoc enabled
[ 2.211888] EXT4-fs (md1): mounted filesystem with ordered data mode
[ 2.616988] usb 4-1: New USB device found, idVendor=0463, idProduct=ffff
[ 2.617107] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=4
[ 2.617251] usb 4-1: Product: Ellipse MAX
[ 2.617393] usb 4-1: Manufacturer: MGE UPS SYSTEMS
[ 2.617526] usb 4-1: SerialNumber: PbAc
[ 2.617714] usb 4-1: configuration #1 chosen from 1 choice
[ 2.857060] usb 4-2: new low speed USB device using uhci_hcd and address 3
[ 3.035075] usb 4-2: New USB device found, idVendor=0b05, idProduct=172e
[ 3.035215] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.035366] usb 4-2: Product: ASUS DH Remote
[ 3.035490] usb 4-2: Manufacturer: T-wins
[ 3.035695] usb 4-2: configuration #1 chosen from 1 choice
[ 3.277060] usb 7-1: new full speed USB device using uhci_hcd and address 2
[ 3.432944] usb 7-1: New USB device found, idVendor=0c76, idProduct=1607
[ 3.432947] usb 7-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 3.432949] usb 7-1: Product: USB Headphone Set
[ 3.433031] usb 7-1: configuration #1 chosen from 1 choice
[ 3.882407] udev: starting version 149
[ 4.769077] usbcore: registered new interface driver hiddev
[ 4.838933] ACPI: SSDT 00000000dfed6348 00261 (v01 PmRef Cpu0Ist 00003000 INTL 20050228)
[ 4.840030] ACPI: SSDT 00000000dfed5a8d 00518 (v01 PmRef Cpu0Cst 00003001 INTL 20050228)
[ 4.842990] input: PC Speaker as /devices/platform/pcspkr/input/input1
[ 4.877048] Monitor-Mwait will be used to enter C-1 state
[ 4.877111] processor LNXCPU:00: registered as cooling_device0
[ 4.877248] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 4.878127] ACPI: SSDT 00000000dfed65a9 001F2 (v01 PmRef Cpu1Ist 00003000 INTL 20050228)
[ 4.878814] ACPI: SSDT 00000000dfed5fa5 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20050228)
[ 4.879928] processor LNXCPU:01: registered as cooling_device1
[ 4.880064] ACPI: Processor [CPU1] (supports 8 throttling states)
[ 4.988382] i801_smbus 0000:00:1f.3: enabling device (0001 -> 0003)
[ 4.988528] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 5.140462] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 5.140614] ACPI: Power Button [PWRF]
[ 5.140826] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0A03:00/PNP0C0C:00/input/input3
[ 5.140983] ACPI: Power Button [PWRB]
[ 6.004194] usbcore: registered new interface driver snd-usb-audio
[ 15.029732] /tmp/buildd/linux-2.6-2.6.31/debian/build/source_i386_none/drivers/hid/usbhid/hid-core.c: usb_submit_urb(ctrl) failed
[ 15.029914] generic-usb 0003:0463:FFFF.0001: timeout initializing reports
[ 15.030154] generic-usb 0003:0463:FFFF.0001: hiddev96,hidraw0: USB HID v1.10 Device [MGE UPS SYSTEMS Ellipse MAX] on usb-0000:00:1a.1-1/input0
[ 15.038933] generic-usb 0003:0B05:172E.0002: hiddev97,hidraw1: USB HID v1.10 Device [T-wins ASUS DH Remote] on usb-0000:00:1a.1-2/input0
[ 15.042580] input: USB Headphone Set as /devices/pci0000:00/0000:00:1d.1/usb7/7-1/7-1:1.3/input/input4
[ 15.042728] generic-usb 0003:0C76:1607.0003: input,hidraw2: USB HID v1.00 Device [USB Headphone Set] on usb-0000:00:1d.1-1/input3
[ 15.042833] usbcore: registered new interface driver usbhid
[ 15.042901] usbhid: v2.6:USB HID core driver
[ 16.349451] EXT4-fs (md1): internal journal on md1:8
[ 16.539171] Uniform Multi-Platform E-IDE driver
[ 16.568786] ide-cd driver 5.00
[ 16.624522] md: raid1 personality registered for level 1
[ 16.688036] ipmi message handler version 39.2
[ 16.710460] IPMI System Interface driver.
[ 16.710635] ipmi_si: Trying SMBIOS-specified kcs state machine at mem address 0x0, slave address 0x20, irq 0
[ 16.710794] Could not set up I/O space
[ 16.745054] ipmi_si: Unable to find any System Interface(s)
[ 16.778633] coretemp coretemp.0: Using relative temperature scale!
[ 16.778811] coretemp coretemp.1: Using relative temperature scale!
[ 16.921046] i2c-adapter i2c-0: Found a SCH5027 chip at 0x2e (rev 0x69).
[ 16.937109] dme1737 0-002e: Optional features: pwm3=yes, pwm5=no, pwm6=no, fan3=yes, fan4=yes, fan5=no, fan6=no.
[ 16.983482] device-mapper: uevent: version 1.0.3
[ 17.019092] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: [email protected]
[ 17.327553] md: md0 stopped.
[ 17.373921] md: bind<sdb1>
[ 17.374217] md: bind<sda1>
[ 17.374488] md: bind<sdc1>
[ 17.375864] raid1: raid set md0 active with 3 out of 3 mirrors
[ 17.376019] md0: detected capacity change from 0 to 542769152
[ 17.377340] md0: unknown partition table
[ 17.495121] md: md2 stopped.
[ 17.521017] md: bind<sdb4>
[ 17.521290] md: bind<sda4>
[ 17.521517] md: bind<sdc4>
[ 17.526932] raid5: device sdc4 operational as raid disk 0
[ 17.527047] raid5: device sda4 operational as raid disk 2
[ 17.527174] raid5: device sdb4 operational as raid disk 1
[ 17.527580] raid5: allocated 3228kB for md2
[ 17.548041] raid5: raid level 5 set md2 active with 3 out of 3 devices, algorithm 2
[ 17.548193] RAID5 conf printout:
[ 17.548324] --- rd:3 wd:3
[ 17.548451] disk 0, o:1, dev:sdc4
[ 17.548581] disk 1, o:1, dev:sdb4
[ 17.548708] disk 2, o:1, dev:sda4
[ 17.548872] md2: detected capacity change from 0 to 883131678720
[ 17.550192] md2: unknown partition table
[ 18.433582] kjournald starting. Commit interval 5 seconds
[ 18.459987] EXT3 FS on md0, internal journal
[ 18.460228] EXT3-fs: mounted filesystem with ordered data mode.
[ 18.472750] EXT4-fs (md2): barriers enabled
[ 18.473276] kjournald2 starting: pid 2105, dev md2:8, commit interval 5 seconds
[ 18.508402] EXT4-fs (md2): internal journal on md2:8
[ 18.508759] EXT4-fs (md2): delayed allocation enabled
[ 18.509097] EXT4-fs: file extents enabled
[ 18.549014] EXT4-fs: mballoc enabled
[ 18.549158] EXT4-fs (md2): mounted filesystem with ordered data mode
[ 19.144714] NET: Registered protocol family 15
[ 19.185895] alg: No test for cipher_null (cipher_null-generic)
[ 19.186098] alg: No test for ecb(cipher_null) (ecb-cipher_null)
[ 19.186249] alg: No test for digest_null (digest_null-generic)
[ 19.186392] alg: No test for compress_null (compress_null-generic)
[ 19.231656] padlock: VIA PadLock Hash Engine not detected.
[ 19.290450] padlock: VIA PadLock Hash Engine not detected.
[ 19.332886] padlock: VIA PadLock not detected.
[ 19.388573] Intel AES-NI instructions are not detected.
[ 21.104592] e1000e 0000:0d:00.0: irq 27 for MSI/MSI-X
[ 21.160215] e1000e 0000:0d:00.0: irq 27 for MSI/MSI-X
[ 21.161362] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 21.492599] JBD: barrier-based sync failed on md1:8 - disabling barriers
[ 21.673162] RPC: Registered udp transport module.
[ 21.673291] RPC: Registered tcp transport module.
[ 21.721900] Slow work thread pool: Starting up
[ 21.744076] Slow work thread pool: Ready
[ 21.744256] FS-Cache: Loaded
[ 21.790627] FS-Cache: Netfs 'nfs' registered for caching
[ 21.925374] Installing knfsd (copyright (C) 1996 [email protected]).
[ 22.186919] ttyS1: LSR safety check engaged!
[ 22.187525] ttyS1: LSR safety check engaged!
[ 23.538992] SMsC 37B787 watchdog component driver 1.1 initialising...
[ 23.540257] smsc37b787_wdt: Timeout set to 60 second(s).
[ 23.540385] smsc37b787_wdt: Watchdog initialized and sleeping (nowayout=0)...
[ 25.466263] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[ 27.817247] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
[ 27.818583] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 33.566372] lp: driver loaded but no devices found
[ 33.597855] ppdev: user-space parallel port driver
[ 36.841378] svc: failed to register lockdv1 RPC service (errno 97).
[ 36.842221] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[ 36.856897] NFSD: starting 90-second grace period
[ 38.393408] eth0: no IPv6 routers present
[ 40.527714] JBD: barrier-based sync failed on md2:8 - disabling barriers
[ 94.384626] e1000e 0000:0f:00.0: irq 29 for MSI/MSI-X
[ 94.440188] e1000e 0000:0f:00.0: irq 29 for MSI/MSI-X
[ 94.441496] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 94.585688] PPP generic driver version 2.4.2
[ 98.806893] e1000e: eth1 NIC Link is Up 100 Mbps Full Duplex, Flow Control: None
[ 98.807049] 0000:0f:00.0: eth1: 10/100 speed: disabling TSO
[ 98.807867] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 99.869818] NET: Registered protocol family 24
[ 101.968714] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 101.969167] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
[ 101.969322] nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
[ 101.969469] sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
[ 102.117949] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 109.317030] eth1: no IPv6 routers present
Anyone ?
Le mercredi 16 décembre 2009 à 16:57 +0100, Xavier Bestel a écrit :
> Hi,
>
> I have a Tyan Bigby-P S5217, with a stock debian 2.6.31 kernel, which
> apparently doesn't "see" the cards I plug (it sees its internal
> peripherals fine).
>
> I first plugged a wifi PCI card into a PCI-X slot (there's no PCI slot),
> it didn't appear in lspci. As I thought it was a voltage problem (PCI-X
> only accept 3.3v, not 5v IIRC) I bought a PCI-E one.
> It's still not seen in lspci.
>
> The only maybe-kind-of relevant things I see in dmesg are:
>
> [ 0.162705] PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 16
> [ 0.164635] PCI: BIOS Bug: MCFG area at f0000000 is not reserved in ACPI motherboard resources
> [ 0.164722] PCI: Not using MMCONFIG.
>
> [ 0.184095] PCI: Using ACPI for IRQ routing
> [ 0.184098] pci 0000:00:1c.0: BAR 13: can't allocate resource
>
>
> Does anyone know what I can do to pinpoint the problem ?
>
> Thanks,
> Xav
>
>
> PS: lspci & dmesg follow, please Cc: me on answers.
>
>
> 00:00.0 Host bridge: Intel Corporation 3200/3210 Chipset DRAM Controller (rev 01)
> 00:1a.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 02)
> 00:1a.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 02)
> 00:1a.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 02)
> 00:1a.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 02)
> 00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 02)
> 00:1c.4 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 5 (rev 02)
> 00:1c.5 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 6 (rev 02)
> 00:1d.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 02)
> 00:1d.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 02)
> 00:1d.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 02)
> 00:1d.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 02)
> 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 92)
> 00:1f.0 ISA bridge: Intel Corporation 82801IR (ICH9R) LPC Interface Controller (rev 02)
> 00:1f.2 SATA controller: Intel Corporation 82801IR/IO/IH (ICH9R/DO/DH) 6 port SATA AHCI Controller (rev 02)
> 00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 02)
> 00:1f.6 Signal processing controller: Intel Corporation 82801I (ICH9 Family) Thermal Subsystem (rev 02)
> 0d:00.0 Ethernet controller: Intel Corporation 82573L Gigabit Ethernet Controller
> 0f:00.0 Ethernet controller: Intel Corporation 82573L Gigabit Ethernet Controller
> 11:03.0 VGA compatible controller: ATI Technologies Inc ES1000 (rev 02)
>
>
>
>
>
> [ 0.000000] Initializing cgroup subsys cpuset
> [ 0.000000] Initializing cgroup subsys cpu
> [ 0.000000] Linux version 2.6.31-1-amd64 (Debian 2.6.31-2) ([email protected]) (gcc version 4.3.4 (Debian 4.3.4-6) ) #1 SMP Sun Nov 15 22:05:44 UTC 2009
> [ 0.000000] Command line: root=/dev/md1 ro
> [ 0.000000] KERNEL supported cpus:
> [ 0.000000] Intel GenuineIntel
> [ 0.000000] AMD AuthenticAMD
> [ 0.000000] Centaur CentaurHauls
> [ 0.000000] BIOS-provided physical RAM map:
> [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009e800 (usable)
> [ 0.000000] BIOS-e820: 000000000009e800 - 00000000000a0000 (reserved)
> [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
> [ 0.000000] BIOS-e820: 0000000000100000 - 00000000dfed0000 (usable)
> [ 0.000000] BIOS-e820: 00000000dfed0000 - 00000000dfede000 (ACPI data)
> [ 0.000000] BIOS-e820: 00000000dfede000 - 00000000dfedf000 (ACPI NVS)
> [ 0.000000] BIOS-e820: 00000000dfedf000 - 00000000e0000000 (reserved)
> [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
> [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
> [ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
> [ 0.000000] BIOS-e820: 0000000100000000 - 0000000120000000 (usable)
> [ 0.000000] DMI present.
> [ 0.000000] Phoenix BIOS detected: BIOS may corrupt low RAM, working around it.
> [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
> [ 0.000000] last_pfn = 0x120000 max_arch_pfn = 0x400000000
> [ 0.000000] MTRR default type: uncachable
> [ 0.000000] MTRR fixed ranges enabled:
> [ 0.000000] 00000-9FFFF write-back
> [ 0.000000] A0000-BFFFF uncachable
> [ 0.000000] C0000-CBFFF write-protect
> [ 0.000000] CC000-DFFFF uncachable
> [ 0.000000] E0000-FFFFF write-protect
> [ 0.000000] MTRR variable ranges enabled:
> [ 0.000000] 0 base 000000000 mask F80000000 write-back
> [ 0.000000] 1 base 080000000 mask FC0000000 write-back
> [ 0.000000] 2 base 0C0000000 mask FE0000000 write-back
> [ 0.000000] 3 base 100000000 mask FE0000000 write-back
> [ 0.000000] 4 base 0DFF00000 mask FFFF00000 uncachable
> [ 0.000000] 5 disabled
> [ 0.000000] 6 disabled
> [ 0.000000] 7 disabled
> [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
> [ 0.000000] e820 update range: 00000000dff00000 - 0000000100000000 (usable) ==> (reserved)
> [ 0.000000] last_pfn = 0xdfed0 max_arch_pfn = 0x400000000
> [ 0.000000] initial memory mapped : 0 - 20000000
> [ 0.000000] init_memory_mapping: 0000000000000000-00000000dfed0000
> [ 0.000000] 0000000000 - 00dfe00000 page 2M
> [ 0.000000] 00dfe00000 - 00dfed0000 page 4k
> [ 0.000000] kernel direct mapping tables up to dfed0000 @ 10000-16000
> [ 0.000000] init_memory_mapping: 0000000100000000-0000000120000000
> [ 0.000000] 0100000000 - 0120000000 page 2M
> [ 0.000000] kernel direct mapping tables up to 120000000 @ 14000-1a000
> [ 0.000000] RAMDISK: 37760000 - 37fef1bc
> [ 0.000000] ACPI: RSDP 00000000000f6d70 00024 (v02 PTLTD )
> [ 0.000000] ACPI: XSDT 00000000dfed3f2f 0008C (v01 PTLTD XSDT 06040000 LTP 00000000)
> [ 0.000000] ACPI: FACP 00000000dfedde40 000F4 (v03 INTEL Bigby 06040000 PTL 00000002)
> [ 0.000000] ACPI: DSDT 00000000dfed7fa7 05E15 (v01 INTEL BIGBY 06040000 MSFT 0100000E)
> [ 0.000000] ACPI: FACS 00000000dfedefc0 00040
> [ 0.000000] ACPI: MCFG 00000000dfeddf34 0003C (v01 PTLTD MCFG 06040000 LTP 00000000)
> [ 0.000000] ACPI: APIC 00000000dfeddf70 00068 (v01 PTLTD APIC 06040000 LTP 00000000)
> [ 0.000000] ACPI: BOOT 00000000dfeddfd8 00028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001)
> [ 0.000000] ACPI: SSDT 00000000dfed582e 0025F (v01 PmRef Cpu0Tst 00003000 INTL 20050228)
> [ 0.000000] ACPI: SSDT 00000000dfed5788 000A6 (v01 PmRef Cpu7Tst 00003000 INTL 20050228)
> [ 0.000000] ACPI: SSDT 00000000dfed56e2 000A6 (v01 PmRef Cpu6Tst 00003000 INTL 20050228)
> [ 0.000000] ACPI: SSDT 00000000dfed563c 000A6 (v01 PmRef Cpu5Tst 00003000 INTL 20050228)
> [ 0.000000] ACPI: SSDT 00000000dfed5596 000A6 (v01 PmRef Cpu4Tst 00003000 INTL 20050228)
> [ 0.000000] ACPI: SSDT 00000000dfed54f0 000A6 (v01 PmRef Cpu3Tst 00003000 INTL 20050228)
> [ 0.000000] ACPI: SSDT 00000000dfed544a 000A6 (v01 PmRef Cpu2Tst 00003000 INTL 20050228)
> [ 0.000000] ACPI: SSDT 00000000dfed53a4 000A6 (v01 PmRef Cpu1Tst 00003000 INTL 20050228)
> [ 0.000000] ACPI: SSDT 00000000dfed3fbb 013E9 (v01 PmRef CpuPm 00003000 INTL 20050228)
> [ 0.000000] ACPI: Local APIC address 0xfee00000
> [ 0.000000] No NUMA configuration found
> [ 0.000000] Faking a node at 0000000000000000-0000000120000000
> [ 0.000000] Bootmem setup node 0 0000000000000000-0000000120000000
> [ 0.000000] NODE_DATA [0000000000015000 - 000000000001cfff]
> [ 0.000000] bootmap [000000000001d000 - 0000000000040fff] pages 24
> [ 0.000000] (8 early reservations) ==> bootmem [0000000000 - 0120000000]
> [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
> [ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
> [ 0.000000] #2 [0001000000 - 0001631d2c] TEXT DATA BSS ==> [0001000000 - 0001631d2c]
> [ 0.000000] #3 [0037760000 - 0037fef1bc] RAMDISK ==> [0037760000 - 0037fef1bc]
> [ 0.000000] #4 [000009e800 - 0000100000] BIOS reserved ==> [000009e800 - 0000100000]
> [ 0.000000] #5 [0001632000 - 0001632174] BRK ==> [0001632000 - 0001632174]
> [ 0.000000] #6 [0000010000 - 0000014000] PGTABLE ==> [0000010000 - 0000014000]
> [ 0.000000] #7 [0000014000 - 0000015000] PGTABLE ==> [0000014000 - 0000015000]
> [ 0.000000] found SMP MP-table at [ffff8800000f6da0] f6da0
> [ 0.000000] [ffffea0000000000-ffffea0003ffffff] PMD -> [ffff880028600000-ffff88002bffffff] on node 0
> [ 0.000000] Zone PFN ranges:
> [ 0.000000] DMA 0x00000010 -> 0x00001000
> [ 0.000000] DMA32 0x00001000 -> 0x00100000
> [ 0.000000] Normal 0x00100000 -> 0x00120000
> [ 0.000000] Movable zone start PFN for each node
> [ 0.000000] early_node_map[3] active PFN ranges
> [ 0.000000] 0: 0x00000010 -> 0x0000009e
> [ 0.000000] 0: 0x00000100 -> 0x000dfed0
> [ 0.000000] 0: 0x00100000 -> 0x00120000
> [ 0.000000] On node 0 totalpages: 1048158
> [ 0.000000] DMA zone: 56 pages used for memmap
> [ 0.000000] DMA zone: 105 pages reserved
> [ 0.000000] DMA zone: 3821 pages, LIFO batch:0
> [ 0.000000] DMA32 zone: 14280 pages used for memmap
> [ 0.000000] DMA32 zone: 898824 pages, LIFO batch:31
> [ 0.000000] Normal zone: 1792 pages used for memmap
> [ 0.000000] Normal zone: 129280 pages, LIFO batch:31
> [ 0.000000] ACPI: PM-Timer IO Port: 0x1008
> [ 0.000000] ACPI: Local APIC address 0xfee00000
> [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
> [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
> [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
> [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
> [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
> [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
> [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
> [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
> [ 0.000000] ACPI: IRQ0 used by override.
> [ 0.000000] ACPI: IRQ2 used by override.
> [ 0.000000] ACPI: IRQ9 used by override.
> [ 0.000000] Using ACPI (MADT) for SMP configuration information
> [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
> [ 0.000000] nr_irqs_gsi: 24
> [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 000000000009f000
> [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
> [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
> [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
> [ 0.000000] PM: Registered nosave memory: 00000000dfed0000 - 00000000dfede000
> [ 0.000000] PM: Registered nosave memory: 00000000dfede000 - 00000000dfedf000
> [ 0.000000] PM: Registered nosave memory: 00000000dfedf000 - 00000000e0000000
> [ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000fec00000
> [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec10000
> [ 0.000000] PM: Registered nosave memory: 00000000fec10000 - 00000000fee00000
> [ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
> [ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ff000000
> [ 0.000000] PM: Registered nosave memory: 00000000ff000000 - 0000000100000000
> [ 0.000000] Allocating PCI resources starting at e0000000 (gap: e0000000:1ec00000)
> [ 0.000000] NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:2 nr_node_ids:1
> [ 0.000000] PERCPU: Embedded 29 pages at ffff88002801f000, static data 86368 bytes
> [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1031925
> [ 0.000000] Policy zone: Normal
> [ 0.000000] Kernel command line: root=/dev/md1 ro
> [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
> [ 0.000000] Initializing CPU#0
> [ 0.000000] Checking aperture...
> [ 0.000000] No AGP bridge found
> [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
> [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
> [ 0.000000] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
> [ 0.000000] Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000
> [ 0.000000] software IO TLB at phys 0x20000000 - 0x24000000
> [ 0.000000] Memory: 4051700k/4718592k available (2947k kernel code, 525960k absent, 140932k reserved, 1661k data, 648k init)
> [ 0.000000] Hierarchical RCU implementation.
> [ 0.000000] NR_IRQS:4352 nr_irqs:424
> [ 0.000000] Extended CMOS year: 2000
> [ 0.000000] Fast TSC calibration using PIT
> [ 0.000000] Detected 2393.470 MHz processor.
> [ 0.004000] Console: colour VGA+ 80x25
> [ 0.004000] console [tty0] enabled
> [ 0.004010] Calibrating delay loop (skipped), value calculated using timer frequency.. 4786.94 BogoMIPS (lpj=9573880)
> [ 0.004218] Security Framework initialized
> [ 0.004286] SELinux: Disabled at boot.
> [ 0.004684] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
> [ 0.007008] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
> [ 0.008202] Mount-cache hash table entries: 256
> [ 0.008421] Initializing cgroup subsys ns
> [ 0.008489] Initializing cgroup subsys cpuacct
> [ 0.008555] Initializing cgroup subsys devices
> [ 0.008621] Initializing cgroup subsys freezer
> [ 0.008686] Initializing cgroup subsys net_cls
> [ 0.008776] CPU: L1 I cache: 32K, L1 D cache: 32K
> [ 0.008884] CPU: L2 cache: 2048K
> [ 0.008948] CPU 0/0x0 -> Node 0
> [ 0.009011] CPU: Physical Processor ID: 0
> [ 0.009075] CPU: Processor Core ID: 0
> [ 0.009140] mce: CPU supports 6 MCE banks
> [ 0.009208] CPU0: Thermal monitoring handled by SMI
> [ 0.009211] using mwait in idle threads.
> [ 0.009275] Performance Counters: Core2 events, Intel PMU driver.
> [ 0.009432] ... version: 2
> [ 0.009496] ... bit width: 40
> [ 0.009560] ... generic counters: 2
> [ 0.009624] ... value mask: 000000ffffffffff
> [ 0.009690] ... max period: 000000007fffffff
> [ 0.009757] ... fixed-purpose counters: 3
> [ 0.009821] ... counter mask: 0000000700000003
> [ 0.010764] ACPI: Core revision 20090521
> [ 0.020058] Setting APIC routing to flat
> [ 0.020436] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
> [ 0.061199] CPU0: Intel(R) Core(TM)2 Duo CPU E4600 @ 2.40GHz stepping 0d
> [ 0.064001] Booting processor 1 APIC 0x1 ip 0x6000
> [ 0.004000] Initializing CPU#1
> [ 0.004000] Calibrating delay using timer specific routine.. 4788.23 BogoMIPS (lpj=9576478)
> [ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K
> [ 0.004000] CPU: L2 cache: 2048K
> [ 0.004000] CPU 1/0x1 -> Node 0
> [ 0.004000] CPU: Physical Processor ID: 0
> [ 0.004000] CPU: Processor Core ID: 1
> [ 0.004000] mce: CPU supports 6 MCE banks
> [ 0.004000] CPU1: Thermal monitoring enabled (TM2)
> [ 0.004000] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
> [ 0.149291] CPU1: Intel(R) Core(TM)2 Duo CPU E4600 @ 2.40GHz stepping 0d
> [ 0.150108] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
> [ 0.152026] Brought up 2 CPUs
> [ 0.152091] Total of 2 processors activated (9575.17 BogoMIPS).
> [ 0.152220] CPU0 attaching sched-domain:
> [ 0.152223] domain 0: span 0-1 level MC
> [ 0.152225] groups: 0 1
> [ 0.152229] CPU1 attaching sched-domain:
> [ 0.152231] domain 0: span 0-1 level MC
> [ 0.152233] groups: 1 0
> [ 0.152298] Booting paravirtualized kernel on bare hardware
> [ 0.152298] regulator: core version 0.5
> [ 0.152298] NET: Registered protocol family 16
> [ 0.152304] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
> [ 0.152390] ACPI: bus type pci registered
> [ 0.152517] PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 16
> [ 0.152587] PCI: Not using MMCONFIG.
> [ 0.152651] PCI: Using configuration type 1 for base access
> [ 0.156332] bio: create slab <bio-0> at 0
> [ 0.156498] ACPI: EC: Look up EC in DSDT
> [ 0.162244] ACPI: Interpreter enabled
> [ 0.162310] ACPI: (supports S0 S1 S3 S4 S5)
> [ 0.162605] ACPI: Using IOAPIC for interrupt routing
> [ 0.162705] PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 16
> [ 0.164635] PCI: BIOS Bug: MCFG area at f0000000 is not reserved in ACPI motherboard resources
> [ 0.164722] PCI: Not using MMCONFIG.
> [ 0.168525] ACPI: No dock devices found.
> [ 0.169496] ACPI: PCI Root Bridge [PCI0] (0000:00)
> [ 0.169689] pci 0000:00:1a.0: reg 20 io port: [0x1820-0x183f]
> [ 0.169768] pci 0000:00:1a.1: reg 20 io port: [0x1840-0x185f]
> [ 0.169844] pci 0000:00:1a.2: reg 20 io port: [0x1860-0x187f]
> [ 0.169914] pci 0000:00:1a.7: reg 10 32bit mmio: [0xe8501800-0xe8501bff]
> [ 0.169967] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
> [ 0.170038] pci 0000:00:1a.7: PME# disabled
> [ 0.170158] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
> [ 0.170228] pci 0000:00:1c.0: PME# disabled
> [ 0.170349] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
> [ 0.170419] pci 0000:00:1c.4: PME# disabled
> [ 0.170538] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
> [ 0.170608] pci 0000:00:1c.5: PME# disabled
> [ 0.170722] pci 0000:00:1d.0: reg 20 io port: [0x1880-0x189f]
> [ 0.170803] pci 0000:00:1d.1: reg 20 io port: [0x18a0-0x18bf]
> [ 0.170879] pci 0000:00:1d.2: reg 20 io port: [0x18c0-0x18df]
> [ 0.170949] pci 0000:00:1d.7: reg 10 32bit mmio: [0xe8501c00-0xe8501fff]
> [ 0.171001] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
> [ 0.171072] pci 0000:00:1d.7: PME# disabled
> [ 0.171254] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
> [ 0.171259] pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
> [ 0.171346] pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH6 GPIO
> [ 0.171417] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0600 (mask 007f)
> [ 0.171504] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0ca0 (mask 000f)
> [ 0.171648] pci 0000:00:1f.2: reg 10 io port: [0x1c78-0x1c7f]
> [ 0.171653] pci 0000:00:1f.2: reg 14 io port: [0x1c6c-0x1c6f]
> [ 0.171658] pci 0000:00:1f.2: reg 18 io port: [0x1c70-0x1c77]
> [ 0.171664] pci 0000:00:1f.2: reg 1c io port: [0x1c68-0x1c6b]
> [ 0.171669] pci 0000:00:1f.2: reg 20 io port: [0x18e0-0x18ff]
> [ 0.171675] pci 0000:00:1f.2: reg 24 32bit mmio: [0xe8501000-0xe85017ff]
> [ 0.171705] pci 0000:00:1f.2: PME# supported from D3hot
> [ 0.171773] pci 0000:00:1f.2: PME# disabled
> [ 0.171864] pci 0000:00:1f.3: reg 10 64bit mmio: [0xe8502000-0xe85020ff]
> [ 0.171877] pci 0000:00:1f.3: reg 20 io port: [0x1c00-0x1c1f]
> [ 0.171926] pci 0000:00:1f.6: reg 10 64bit mmio: [0xe8500000-0xe8500fff]
> [ 0.172023] pci 0000:00:1c.0: bridge io port: [0x00-0xfff]
> [ 0.172091] pci 0000:0d:00.0: reg 10 32bit mmio: [0xe8080000-0xe809ffff]
> [ 0.172102] pci 0000:0d:00.0: reg 14 32bit mmio: [0xe8000000-0xe807ffff]
> [ 0.172113] pci 0000:0d:00.0: reg 18 io port: [0x2000-0x201f]
> [ 0.172197] pci 0000:0d:00.0: PME# supported from D0 D3hot D3cold
> [ 0.172270] pci 0000:0d:00.0: PME# disabled
> [ 0.172383] pci 0000:00:1c.4: bridge io port: [0x2000-0x2fff]
> [ 0.172387] pci 0000:00:1c.4: bridge 32bit mmio: [0xe8000000-0xe80fffff]
> [ 0.172452] pci 0000:0f:00.0: reg 10 32bit mmio: [0xe8180000-0xe819ffff]
> [ 0.172463] pci 0000:0f:00.0: reg 14 32bit mmio: [0xe8100000-0xe817ffff]
> [ 0.172474] pci 0000:0f:00.0: reg 18 io port: [0x3000-0x301f]
> [ 0.172557] pci 0000:0f:00.0: PME# supported from D0 D3hot D3cold
> [ 0.172630] pci 0000:0f:00.0: PME# disabled
> [ 0.172743] pci 0000:00:1c.5: bridge io port: [0x3000-0x3fff]
> [ 0.172747] pci 0000:00:1c.5: bridge 32bit mmio: [0xe8100000-0xe81fffff]
> [ 0.172789] pci 0000:11:03.0: reg 10 32bit mmio: [0xe0000000-0xe7ffffff]
> [ 0.172796] pci 0000:11:03.0: reg 14 io port: [0x4000-0x40ff]
> [ 0.172802] pci 0000:11:03.0: reg 18 32bit mmio: [0xe8200000-0xe820ffff]
> [ 0.172823] pci 0000:11:03.0: reg 30 32bit mmio: [0x000000-0x01ffff]
> [ 0.172842] pci 0000:11:03.0: supports D1 D2
> [ 0.172883] pci 0000:00:1e.0: transparent bridge
> [ 0.172951] pci 0000:00:1e.0: bridge io port: [0x4000-0x4fff]
> [ 0.172954] pci 0000:00:1e.0: bridge 32bit mmio: [0xe8200000-0xe82fffff]
> [ 0.172960] pci 0000:00:1e.0: bridge 64bit mmio pref: [0xe0000000-0xe7ffffff]
> [ 0.172979] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
> [ 0.173218] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
> [ 0.173291] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP5._PRT]
> [ 0.173356] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP6._PRT]
> [ 0.173433] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
> [ 0.178179] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 10 11 12 14 15)
> [ 0.178845] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
> [ 0.179511] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 10 11 12 14 15)
> [ 0.180180] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
> [ 0.180950] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
> [ 0.181720] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
> [ 0.182490] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 *11 12 14 15)
> [ 0.183159] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
> [ 0.183926] usbcore: registered new interface driver usbfs
> [ 0.184015] usbcore: registered new interface driver hub
> [ 0.184091] usbcore: registered new device driver usb
> [ 0.184095] PCI: Using ACPI for IRQ routing
> [ 0.184098] pci 0000:00:1c.0: BAR 13: can't allocate resource
> [ 0.192140] hpet clockevent registered
> [ 0.192145] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
> [ 0.192237] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
> [ 0.192521] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
> [ 0.208092] pnp: PnP ACPI init
> [ 0.208173] ACPI: bus type pnp registered
> [ 0.210720] pnp: PnP ACPI: found 10 devices
> [ 0.210786] ACPI: ACPI bus type pnp unregistered
> [ 0.210860] system 00:01: ioport range 0x600-0x63f has been reserved
> [ 0.210930] system 00:01: ioport range 0x800-0x80f has been reserved
> [ 0.211000] system 00:01: ioport range 0xca0-0xcaf has been reserved
> [ 0.211069] system 00:01: ioport range 0x1000-0x107f has been reserved
> [ 0.211139] system 00:01: ioport range 0x1180-0x11bf has been reserved
> [ 0.211209] system 00:01: ioport range 0x4d0-0x4d1 has been reserved
> [ 0.211279] system 00:01: ioport range 0xfe00-0xfe00 has been reserved
> [ 0.211349] system 00:01: iomem range 0xfed14000-0xfed17fff has been reserved
> [ 0.211420] system 00:01: iomem range 0xf8000000-0xfbffffff has been reserved
> [ 0.211492] system 00:01: iomem range 0xfed20000-0xfed8ffff has been reserved
> [ 0.211563] system 00:01: iomem range 0xfef00000-0xfeffffff has been reserved
> [ 0.216316] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:05
> [ 0.216385] pci 0000:00:1c.0: IO window: disabled
> [ 0.216454] pci 0000:00:1c.0: MEM window: disabled
> [ 0.216522] pci 0000:00:1c.0: PREFETCH window: disabled
> [ 0.216591] pci 0000:00:1c.4: PCI bridge, secondary bus 0000:0d
> [ 0.216660] pci 0000:00:1c.4: IO window: 0x2000-0x2fff
> [ 0.216730] pci 0000:00:1c.4: MEM window: 0xe8000000-0xe80fffff
> [ 0.216800] pci 0000:00:1c.4: PREFETCH window: disabled
> [ 0.216869] pci 0000:00:1c.5: PCI bridge, secondary bus 0000:0f
> [ 0.216937] pci 0000:00:1c.5: IO window: 0x3000-0x3fff
> [ 0.217007] pci 0000:00:1c.5: MEM window: 0xe8100000-0xe81fffff
> [ 0.217077] pci 0000:00:1c.5: PREFETCH window: disabled
> [ 0.217148] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:11
> [ 0.217217] pci 0000:00:1e.0: IO window: 0x4000-0x4fff
> [ 0.217287] pci 0000:00:1e.0: MEM window: 0xe8200000-0xe82fffff
> [ 0.217358] pci 0000:00:1e.0: PREFETCH window: 0x000000e0000000-0x000000e7ffffff
> [ 0.217453] alloc irq_desc for 16 on node 0
> [ 0.217455] alloc kstat_irqs on node 0
> [ 0.217459] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
> [ 0.217532] pci 0000:00:1c.0: setting latency timer to 64
> [ 0.217538] pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16
> [ 0.217610] pci 0000:00:1c.4: setting latency timer to 64
> [ 0.217616] alloc irq_desc for 17 on node 0
> [ 0.217617] alloc kstat_irqs on node 0
> [ 0.217620] pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
> [ 0.217691] pci 0000:00:1c.5: setting latency timer to 64
> [ 0.217697] pci 0000:00:1e.0: setting latency timer to 64
> [ 0.217701] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
> [ 0.217703] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
> [ 0.217705] pci_bus 0000:05: resource 0 mem: [0x0-0xfff]
> [ 0.217707] pci_bus 0000:0d: resource 0 io: [0x2000-0x2fff]
> [ 0.217709] pci_bus 0000:0d: resource 1 mem: [0xe8000000-0xe80fffff]
> [ 0.217711] pci_bus 0000:0f: resource 0 io: [0x3000-0x3fff]
> [ 0.217713] pci_bus 0000:0f: resource 1 mem: [0xe8100000-0xe81fffff]
> [ 0.217715] pci_bus 0000:11: resource 0 io: [0x4000-0x4fff]
> [ 0.217717] pci_bus 0000:11: resource 1 mem: [0xe8200000-0xe82fffff]
> [ 0.217720] pci_bus 0000:11: resource 2 pref mem [0xe0000000-0xe7ffffff]
> [ 0.217722] pci_bus 0000:11: resource 3 io: [0x00-0xffff]
> [ 0.217724] pci_bus 0000:11: resource 4 mem: [0x000000-0xffffffffffffffff]
> [ 0.217777] NET: Registered protocol family 2
> [ 0.218004] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
> [ 0.219308] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
> [ 0.223602] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
> [ 0.224228] TCP: Hash tables configured (established 524288 bind 65536)
> [ 0.224298] TCP reno registered
> [ 0.224514] NET: Registered protocol family 1
> [ 0.224638] Unpacking initramfs...
> [ 0.405817] Freeing initrd memory: 8764k freed
> [ 0.409841] Simple Boot Flag at 0x40 set to 0x80
> [ 0.410269] audit: initializing netlink socket (disabled)
> [ 0.410353] type=2000 audit(1260954508.408:1): initialized
> [ 0.410847] HugeTLB registered 2 MB page size, pre-allocated 0 pages
> [ 0.411027] VFS: Disk quotas dquot_6.5.2
> [ 0.411121] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
> [ 0.411239] msgmni has been set to 7930
> [ 0.411450] alg: No test for stdrng (krng)
> [ 0.411544] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
> [ 0.411630] io scheduler noop registered
> [ 0.411694] io scheduler anticipatory registered
> [ 0.411760] io scheduler deadline registered
> [ 0.411840] io scheduler cfq registered (default)
> [ 0.412070] pci 0000:11:03.0: Boot video device
> [ 0.412218] alloc irq_desc for 24 on node 0
> [ 0.412220] alloc kstat_irqs on node 0
> [ 0.412234] pcieport-driver 0000:00:1c.0: irq 24 for MSI/MSI-X
> [ 0.412249] pcieport-driver 0000:00:1c.0: setting latency timer to 64
> [ 0.412370] alloc irq_desc for 25 on node 0
> [ 0.412372] alloc kstat_irqs on node 0
> [ 0.412382] pcieport-driver 0000:00:1c.4: irq 25 for MSI/MSI-X
> [ 0.412393] pcieport-driver 0000:00:1c.4: setting latency timer to 64
> [ 0.412512] alloc irq_desc for 26 on node 0
> [ 0.412514] alloc kstat_irqs on node 0
> [ 0.412524] pcieport-driver 0000:00:1c.5: irq 26 for MSI/MSI-X
> [ 0.412535] pcieport-driver 0000:00:1c.5: setting latency timer to 64
> [ 0.413596] Linux agpgart interface v0.103
> [ 0.413729] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
> [ 0.414035] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
> [ 0.414555] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
> [ 0.414777] input: Macintosh mouse button emulation as /devices/virtual/input/input0
> [ 0.415004] PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
> [ 0.417988] serio: i8042 KBD port at 0x60,0x64 irq 1
> [ 0.418125] serio: i8042 AUX port at 0x60,0x64 irq 12
> [ 0.418346] mice: PS/2 mouse device common for all mice
> [ 0.418539] rtc_cmos 00:04: RTC can wake from S4
> [ 0.418697] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
> [ 0.418868] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
> [ 0.419012] cpuidle: using governor ladder
> [ 0.419144] cpuidle: using governor menu
> [ 0.419278] No iBFT detected.
> [ 0.419646] TCP cubic registered
> [ 0.419820] NET: Registered protocol family 10
> [ 0.420289] lo: Disabled Privacy Extensions
> [ 0.420626] Mobile IPv6
> [ 0.420756] NET: Registered protocol family 17
> [ 0.420947] registered taskstats version 1
> [ 0.421193] rtc_cmos 00:04: setting system clock to 2009-12-16 09:08:29 UTC (1260954509)
> [ 0.421385] Freeing unused kernel memory: 648k freed
> [ 0.421731] Write protecting the kernel read-only data: 4028k
> [ 0.543565] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
> [ 0.543778] alloc irq_desc for 18 on node 0
> [ 0.543781] alloc kstat_irqs on node 0
> [ 0.543790] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
> [ 0.543949] ehci_hcd 0000:00:1a.7: setting latency timer to 64
> [ 0.543955] ehci_hcd 0000:00:1a.7: EHCI Host Controller
> [ 0.544161] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
> [ 0.548293] ehci_hcd 0000:00:1a.7: debug port 1
> [ 0.548441] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
> [ 0.548467] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xe8501800
> [ 0.565315] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
> [ 0.565485] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
> [ 0.565622] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> [ 0.565773] usb usb1: Product: EHCI Host Controller
> [ 0.565907] usb usb1: Manufacturer: Linux 2.6.31-1-amd64 ehci_hcd
> [ 0.566034] usb usb1: SerialNumber: 0000:00:1a.7
> [ 0.566215] usb usb1: configuration #1 chosen from 1 choice
> [ 0.566368] hub 1-0:1.0: USB hub found
> [ 0.566500] hub 1-0:1.0: 6 ports detected
> [ 0.566955] SCSI subsystem initialized
> [ 0.582520] e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k2
> [ 0.582662] e1000e: Copyright (c) 1999-2008 Intel Corporation.
> [ 0.585126] uhci_hcd: USB Universal Host Controller Interface driver
> [ 0.585437] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 16 (level, low) -> IRQ 16
> [ 0.585601] ehci_hcd 0000:00:1d.7: setting latency timer to 64
> [ 0.585608] ehci_hcd 0000:00:1d.7: EHCI Host Controller
> [ 0.585799] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
> [ 0.589866] ehci_hcd 0000:00:1d.7: debug port 1
> [ 0.590014] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
> [ 0.590043] ehci_hcd 0000:00:1d.7: irq 16, io mem 0xe8501c00
> [ 0.611270] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
> [ 0.611448] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
> [ 0.611583] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> [ 0.611735] usb usb2: Product: EHCI Host Controller
> [ 0.611869] usb usb2: Manufacturer: Linux 2.6.31-1-amd64 ehci_hcd
> [ 0.612001] usb usb2: SerialNumber: 0000:00:1d.7
> [ 0.612194] usb usb2: configuration #1 chosen from 1 choice
> [ 0.612427] hub 2-0:1.0: USB hub found
> [ 0.632774] libata version 3.00 loaded.
> [ 0.634051] hub 2-0:1.0: 6 ports detected
> [ 0.637524] e1000e 0000:0d:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
> [ 0.637664] e1000e 0000:0d:00.0: pci_enable_pcie_error_reporting failed 0xfffffffb
> [ 0.637828] e1000e 0000:0d:00.0: setting latency timer to 64
> [ 0.638184] alloc irq_desc for 27 on node 0
> [ 0.638186] alloc kstat_irqs on node 0
> [ 0.638221] e1000e 0000:0d:00.0: irq 27 for MSI/MSI-X
> [ 0.638564] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
> [ 0.638706] uhci_hcd 0000:00:1a.0: setting latency timer to 64
> [ 0.638712] uhci_hcd 0000:00:1a.0: UHCI Host Controller
> [ 0.638931] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
> [ 0.639118] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001820
> [ 0.639283] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
> [ 0.639412] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> [ 0.639563] usb usb3: Product: UHCI Host Controller
> [ 0.639696] usb usb3: Manufacturer: Linux 2.6.31-1-amd64 uhci_hcd
> [ 0.639828] usb usb3: SerialNumber: 0000:00:1a.0
> [ 0.640032] usb usb3: configuration #1 chosen from 1 choice
> [ 0.640214] hub 3-0:1.0: USB hub found
> [ 0.640383] hub 3-0:1.0: 2 ports detected
> [ 0.640580] ahci 0000:00:1f.2: version 3.0
> [ 0.640592] ahci 0000:00:1f.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
> [ 0.640746] alloc irq_desc for 28 on node 0
> [ 0.640747] alloc kstat_irqs on node 0
> [ 0.640757] ahci 0000:00:1f.2: irq 28 for MSI/MSI-X
> [ 0.640828] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x35 impl SATA mode
> [ 0.640982] ahci 0000:00:1f.2: flags: 64bit ncq sntf led clo pmp pio slum part
> [ 0.641131] ahci 0000:00:1f.2: setting latency timer to 64
> [ 0.641372] scsi0 : ahci
> [ 0.641646] scsi1 : ahci
> [ 0.641860] scsi2 : ahci
> [ 0.642071] scsi3 : ahci
> [ 0.642282] scsi4 : ahci
> [ 0.642512] scsi5 : ahci
> [ 0.642799] ata1: SATA max UDMA/133 abar m2048@0xe8501000 port 0xe8501100 irq 28
> [ 0.642947] ata2: DUMMY
> [ 0.643076] ata3: SATA max UDMA/133 abar m2048@0xe8501000 port 0xe8501200 irq 28
> [ 0.643228] ata4: DUMMY
> [ 0.643353] ata5: SATA max UDMA/133 abar m2048@0xe8501000 port 0xe8501300 irq 28
> [ 0.643505] ata6: SATA max UDMA/133 abar m2048@0xe8501000 port 0xe8501380 irq 28
> [ 0.643806] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
> [ 0.643954] uhci_hcd 0000:00:1a.1: setting latency timer to 64
> [ 0.643961] uhci_hcd 0000:00:1a.1: UHCI Host Controller
> [ 0.644162] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
> [ 0.644361] uhci_hcd 0000:00:1a.1: irq 17, io base 0x00001840
> [ 0.644534] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
> [ 0.644671] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> [ 0.644814] usb usb4: Product: UHCI Host Controller
> [ 0.644947] usb usb4: Manufacturer: Linux 2.6.31-1-amd64 uhci_hcd
> [ 0.645082] usb usb4: SerialNumber: 0000:00:1a.1
> [ 0.645287] usb usb4: configuration #1 chosen from 1 choice
> [ 0.645468] hub 4-0:1.0: USB hub found
> [ 0.645599] hub 4-0:1.0: 2 ports detected
> [ 0.645804] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
> [ 0.645945] uhci_hcd 0000:00:1a.2: setting latency timer to 64
> [ 0.645951] uhci_hcd 0000:00:1a.2: UHCI Host Controller
> [ 0.646137] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
> [ 0.646308] uhci_hcd 0000:00:1a.2: irq 18, io base 0x00001860
> [ 0.646472] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
> [ 0.646606] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> [ 0.646761] usb usb5: Product: UHCI Host Controller
> [ 0.646894] usb usb5: Manufacturer: Linux 2.6.31-1-amd64 uhci_hcd
> [ 0.647029] usb usb5: SerialNumber: 0000:00:1a.2
> [ 0.647228] usb usb5: configuration #1 chosen from 1 choice
> [ 0.647409] hub 5-0:1.0: USB hub found
> [ 0.647538] hub 5-0:1.0: 2 ports detected
> [ 0.647734] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
> [ 0.647878] uhci_hcd 0000:00:1d.0: setting latency timer to 64
> [ 0.647884] uhci_hcd 0000:00:1d.0: UHCI Host Controller
> [ 0.648070] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
> [ 0.648243] uhci_hcd 0000:00:1d.0: irq 16, io base 0x00001880
> [ 0.648401] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
> [ 0.648527] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> [ 0.648674] usb usb6: Product: UHCI Host Controller
> [ 0.648807] usb usb6: Manufacturer: Linux 2.6.31-1-amd64 uhci_hcd
> [ 0.648938] usb usb6: SerialNumber: 0000:00:1d.0
> [ 0.649139] usb usb6: configuration #1 chosen from 1 choice
> [ 0.649317] hub 6-0:1.0: USB hub found
> [ 0.649454] hub 6-0:1.0: 2 ports detected
> [ 0.649641] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
> [ 0.649785] uhci_hcd 0000:00:1d.1: setting latency timer to 64
> [ 0.649792] uhci_hcd 0000:00:1d.1: UHCI Host Controller
> [ 0.649980] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
> [ 0.650158] uhci_hcd 0000:00:1d.1: irq 17, io base 0x000018a0
> [ 0.650326] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
> [ 0.650463] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> [ 0.650613] usb usb7: Product: UHCI Host Controller
> [ 0.650750] usb usb7: Manufacturer: Linux 2.6.31-1-amd64 uhci_hcd
> [ 0.650887] usb usb7: SerialNumber: 0000:00:1d.1
> [ 0.651105] usb usb7: configuration #1 chosen from 1 choice
> [ 0.651286] hub 7-0:1.0: USB hub found
> [ 0.651417] hub 7-0:1.0: 2 ports detected
> [ 0.651808] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
> [ 0.651949] uhci_hcd 0000:00:1d.2: setting latency timer to 64
> [ 0.651956] uhci_hcd 0000:00:1d.2: UHCI Host Controller
> [ 0.652149] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
> [ 0.652384] uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018c0
> [ 0.652537] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
> [ 0.652674] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> [ 0.652826] usb usb8: Product: UHCI Host Controller
> [ 0.652959] usb usb8: Manufacturer: Linux 2.6.31-1-amd64 uhci_hcd
> [ 0.653090] usb usb8: SerialNumber: 0000:00:1d.2
> [ 0.653291] usb usb8: configuration #1 chosen from 1 choice
> [ 0.653458] hub 8-0:1.0: USB hub found
> [ 0.653593] hub 8-0:1.0: 2 ports detected
> [ 0.693411] e1000e 0000:0d:00.0: Warning: detected DSPD enabled in EEPROM
> [ 0.710997] Switched to high resolution mode on CPU 1
> [ 0.712782] Switched to high resolution mode on CPU 0
> [ 0.753027] 0000:0d:00.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:e0:81:b2:63:ae
> [ 0.753183] 0000:0d:00.0: eth0: Intel(R) PRO/1000 Network Connection
> [ 0.753341] 0000:0d:00.0: eth0: MAC: 2, PHY: 2, PBA No: ffffff-0ff
> [ 0.753639] e1000e 0000:0f:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
> [ 0.753776] e1000e 0000:0f:00.0: pci_enable_pcie_error_reporting failed 0xfffffffb
> [ 0.753936] e1000e 0000:0f:00.0: setting latency timer to 64
> [ 0.754288] alloc irq_desc for 29 on node 0
> [ 0.754289] alloc kstat_irqs on node 0
> [ 0.754322] e1000e 0000:0f:00.0: irq 29 for MSI/MSI-X
> [ 0.808887] e1000e 0000:0f:00.0: Warning: detected DSPD enabled in EEPROM
> [ 0.869812] 0000:0f:00.0: eth1: (PCI Express:2.5GB/s:Width x1) 00:e0:81:b2:63:af
> [ 0.869960] 0000:0f:00.0: eth1: Intel(R) PRO/1000 Network Connection
> [ 0.870125] 0000:0f:00.0: eth1: MAC: 2, PHY: 2, PBA No: ffffff-0ff
> [ 1.109044] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> [ 1.109203] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
> [ 1.109361] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> [ 1.109501] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> [ 1.110207] ata1.00: ATA-8: STM3500418AS, CC38, max UDMA/133
> [ 1.110347] ata1.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32)
> [ 1.110533] ata6.00: ATA-6: ST31000340NS, SN04, max UDMA/133
> [ 1.110556] ata3.00: ATA-8: STM3500418AS, CC38, max UDMA/133
> [ 1.110560] ata3.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32)
> [ 1.110651] ata5.00: ATA-8: ST3500418AS, CC37, max UDMA/133
> [ 1.110655] ata5.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32)
> [ 1.111173] ata6.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
> [ 1.111739] ata1.00: configured for UDMA/133
> [ 1.111915] ata5.00: configured for UDMA/133
> [ 1.112130] scsi 0:0:0:0: Direct-Access ATA STM3500418AS CC38 PQ: 0 ANSI: 5
> [ 1.112402] ata3.00: configured for UDMA/133
> [ 1.112574] scsi 2:0:0:0: Direct-Access ATA STM3500418AS CC38 PQ: 0 ANSI: 5
> [ 1.112837] scsi 4:0:0:0: Direct-Access ATA ST3500418AS CC37 PQ: 0 ANSI: 5
> [ 1.113016] ata6.00: configured for UDMA/133
> [ 1.113317] scsi 5:0:0:0: Direct-Access ATA ST31000340NS SN04 PQ: 0 ANSI: 5
> [ 1.117925] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
> [ 1.118118] sd 0:0:0:0: [sda] Write Protect is off
> [ 1.118212] sd 2:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
> [ 1.118246] sd 2:0:0:0: [sdb] Write Protect is off
> [ 1.118248] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
> [ 1.118266] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> [ 1.118367] sdb:
> [ 1.118506] sd 4:0:0:0: [sdc] 976773168 512-byte logical blocks: (500 GB/465 GiB)
> [ 1.118539] sd 4:0:0:0: [sdc] Write Protect is off
> [ 1.118541] sd 4:0:0:0: [sdc] Mode Sense: 00 3a 00 00
> [ 1.118559] sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> [ 1.118644] sdc:
> [ 1.118682] sd 5:0:0:0: [sdd] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
> [ 1.118714] sd 5:0:0:0: [sdd] Write Protect is off
> [ 1.118715] sd 5:0:0:0: [sdd] Mode Sense: 00 3a 00 00
> [ 1.118733] sd 5:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> [ 1.118817] sdd:
> [ 1.119900] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
> [ 1.120061] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> [ 1.120316] sda: sdb1 sdb2 sdb3 sdb4
> [ 1.124658] sdc1 sdc2 sdc3 sdc4
> [ 1.128885] sda1 sda2 sda3 sda4
> [ 1.132101] sd 2:0:0:0: [sdb] Attached SCSI disk
> [ 1.137104] sd 0:0:0:0: [sda] Attached SCSI disk
> [ 1.138174] sdd1
> [ 1.138628] sd 5:0:0:0: [sdd] Attached SCSI disk
> [ 1.138642] sd 4:0:0:0: [sdc] Attached SCSI disk
> [ 1.229141] usb 4-1: new low speed USB device using uhci_hcd and address 2
> [ 1.355926] xor: automatically using best checksumming function: generic_sse
> [ 1.373000] generic_sse: 8803.000 MB/sec
> [ 1.373130] xor: using function: generic_sse (8803.000 MB/sec)
> [ 1.373649] async_tx: api initialized (async)
> [ 1.441008] raid6: int64x1 2012 MB/s
> [ 1.509010] raid6: int64x2 2714 MB/s
> [ 1.577022] raid6: int64x4 2105 MB/s
> [ 1.645008] raid6: int64x8 1902 MB/s
> [ 1.713008] raid6: sse2x1 3586 MB/s
> [ 1.781009] raid6: sse2x2 4780 MB/s
> [ 1.849006] raid6: sse2x4 7166 MB/s
> [ 1.849137] raid6: using algorithm sse2x4 (7166 MB/s)
> [ 1.854700] md: raid6 personality registered for level 6
> [ 1.854821] md: raid5 personality registered for level 5
> [ 1.854959] md: raid4 personality registered for level 4
> [ 1.917405] md: md1 stopped.
> [ 1.919576] md: bind<sdb2>
> [ 1.920694] md: bind<sda2>
> [ 1.921040] md: bind<sdc2>
> [ 1.922546] raid5: device sdc2 operational as raid disk 0
> [ 1.922672] raid5: device sda2 operational as raid disk 2
> [ 1.922798] raid5: device sdb2 operational as raid disk 1
> [ 1.923184] raid5: allocated 3228kB for md1
> [ 1.923342] raid5: raid level 5 set md1 active with 3 out of 3 devices, algorithm 2
> [ 1.923490] RAID5 conf printout:
> [ 1.923612] --- rd:3 wd:3
> [ 1.923730] disk 0, o:1, dev:sdc2
> [ 1.923853] disk 1, o:1, dev:sdb2
> [ 1.923979] disk 2, o:1, dev:sda2
> [ 1.924137] md1: detected capacity change from 0 to 107389124608
> [ 1.925244] md1: unknown partition table
> [ 2.192846] EXT4-fs (md1): barriers enabled
> [ 2.205256] kjournald2 starting: pid 453, dev md1:8, commit interval 5 seconds
> [ 2.205431] EXT4-fs (md1): delayed allocation enabled
> [ 2.205766] EXT4-fs: file extents enabled
> [ 2.211754] EXT4-fs: mballoc enabled
> [ 2.211888] EXT4-fs (md1): mounted filesystem with ordered data mode
> [ 2.616988] usb 4-1: New USB device found, idVendor=0463, idProduct=ffff
> [ 2.617107] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=4
> [ 2.617251] usb 4-1: Product: Ellipse MAX
> [ 2.617393] usb 4-1: Manufacturer: MGE UPS SYSTEMS
> [ 2.617526] usb 4-1: SerialNumber: PbAc
> [ 2.617714] usb 4-1: configuration #1 chosen from 1 choice
> [ 2.857060] usb 4-2: new low speed USB device using uhci_hcd and address 3
> [ 3.035075] usb 4-2: New USB device found, idVendor=0b05, idProduct=172e
> [ 3.035215] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
> [ 3.035366] usb 4-2: Product: ASUS DH Remote
> [ 3.035490] usb 4-2: Manufacturer: T-wins
> [ 3.035695] usb 4-2: configuration #1 chosen from 1 choice
> [ 3.277060] usb 7-1: new full speed USB device using uhci_hcd and address 2
> [ 3.432944] usb 7-1: New USB device found, idVendor=0c76, idProduct=1607
> [ 3.432947] usb 7-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
> [ 3.432949] usb 7-1: Product: USB Headphone Set
> [ 3.433031] usb 7-1: configuration #1 chosen from 1 choice
> [ 3.882407] udev: starting version 149
> [ 4.769077] usbcore: registered new interface driver hiddev
> [ 4.838933] ACPI: SSDT 00000000dfed6348 00261 (v01 PmRef Cpu0Ist 00003000 INTL 20050228)
> [ 4.840030] ACPI: SSDT 00000000dfed5a8d 00518 (v01 PmRef Cpu0Cst 00003001 INTL 20050228)
> [ 4.842990] input: PC Speaker as /devices/platform/pcspkr/input/input1
> [ 4.877048] Monitor-Mwait will be used to enter C-1 state
> [ 4.877111] processor LNXCPU:00: registered as cooling_device0
> [ 4.877248] ACPI: Processor [CPU0] (supports 8 throttling states)
> [ 4.878127] ACPI: SSDT 00000000dfed65a9 001F2 (v01 PmRef Cpu1Ist 00003000 INTL 20050228)
> [ 4.878814] ACPI: SSDT 00000000dfed5fa5 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20050228)
> [ 4.879928] processor LNXCPU:01: registered as cooling_device1
> [ 4.880064] ACPI: Processor [CPU1] (supports 8 throttling states)
> [ 4.988382] i801_smbus 0000:00:1f.3: enabling device (0001 -> 0003)
> [ 4.988528] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
> [ 5.140462] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
> [ 5.140614] ACPI: Power Button [PWRF]
> [ 5.140826] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0A03:00/PNP0C0C:00/input/input3
> [ 5.140983] ACPI: Power Button [PWRB]
> [ 6.004194] usbcore: registered new interface driver snd-usb-audio
> [ 15.029732] /tmp/buildd/linux-2.6-2.6.31/debian/build/source_i386_none/drivers/hid/usbhid/hid-core.c: usb_submit_urb(ctrl) failed
> [ 15.029914] generic-usb 0003:0463:FFFF.0001: timeout initializing reports
> [ 15.030154] generic-usb 0003:0463:FFFF.0001: hiddev96,hidraw0: USB HID v1.10 Device [MGE UPS SYSTEMS Ellipse MAX] on usb-0000:00:1a.1-1/input0
> [ 15.038933] generic-usb 0003:0B05:172E.0002: hiddev97,hidraw1: USB HID v1.10 Device [T-wins ASUS DH Remote] on usb-0000:00:1a.1-2/input0
> [ 15.042580] input: USB Headphone Set as /devices/pci0000:00/0000:00:1d.1/usb7/7-1/7-1:1.3/input/input4
> [ 15.042728] generic-usb 0003:0C76:1607.0003: input,hidraw2: USB HID v1.00 Device [USB Headphone Set] on usb-0000:00:1d.1-1/input3
> [ 15.042833] usbcore: registered new interface driver usbhid
> [ 15.042901] usbhid: v2.6:USB HID core driver
> [ 16.349451] EXT4-fs (md1): internal journal on md1:8
> [ 16.539171] Uniform Multi-Platform E-IDE driver
> [ 16.568786] ide-cd driver 5.00
> [ 16.624522] md: raid1 personality registered for level 1
> [ 16.688036] ipmi message handler version 39.2
> [ 16.710460] IPMI System Interface driver.
> [ 16.710635] ipmi_si: Trying SMBIOS-specified kcs state machine at mem address 0x0, slave address 0x20, irq 0
> [ 16.710794] Could not set up I/O space
> [ 16.745054] ipmi_si: Unable to find any System Interface(s)
> [ 16.778633] coretemp coretemp.0: Using relative temperature scale!
> [ 16.778811] coretemp coretemp.1: Using relative temperature scale!
> [ 16.921046] i2c-adapter i2c-0: Found a SCH5027 chip at 0x2e (rev 0x69).
> [ 16.937109] dme1737 0-002e: Optional features: pwm3=yes, pwm5=no, pwm6=no, fan3=yes, fan4=yes, fan5=no, fan6=no.
> [ 16.983482] device-mapper: uevent: version 1.0.3
> [ 17.019092] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: [email protected]
> [ 17.327553] md: md0 stopped.
> [ 17.373921] md: bind<sdb1>
> [ 17.374217] md: bind<sda1>
> [ 17.374488] md: bind<sdc1>
> [ 17.375864] raid1: raid set md0 active with 3 out of 3 mirrors
> [ 17.376019] md0: detected capacity change from 0 to 542769152
> [ 17.377340] md0: unknown partition table
> [ 17.495121] md: md2 stopped.
> [ 17.521017] md: bind<sdb4>
> [ 17.521290] md: bind<sda4>
> [ 17.521517] md: bind<sdc4>
> [ 17.526932] raid5: device sdc4 operational as raid disk 0
> [ 17.527047] raid5: device sda4 operational as raid disk 2
> [ 17.527174] raid5: device sdb4 operational as raid disk 1
> [ 17.527580] raid5: allocated 3228kB for md2
> [ 17.548041] raid5: raid level 5 set md2 active with 3 out of 3 devices, algorithm 2
> [ 17.548193] RAID5 conf printout:
> [ 17.548324] --- rd:3 wd:3
> [ 17.548451] disk 0, o:1, dev:sdc4
> [ 17.548581] disk 1, o:1, dev:sdb4
> [ 17.548708] disk 2, o:1, dev:sda4
> [ 17.548872] md2: detected capacity change from 0 to 883131678720
> [ 17.550192] md2: unknown partition table
> [ 18.433582] kjournald starting. Commit interval 5 seconds
> [ 18.459987] EXT3 FS on md0, internal journal
> [ 18.460228] EXT3-fs: mounted filesystem with ordered data mode.
> [ 18.472750] EXT4-fs (md2): barriers enabled
> [ 18.473276] kjournald2 starting: pid 2105, dev md2:8, commit interval 5 seconds
> [ 18.508402] EXT4-fs (md2): internal journal on md2:8
> [ 18.508759] EXT4-fs (md2): delayed allocation enabled
> [ 18.509097] EXT4-fs: file extents enabled
> [ 18.549014] EXT4-fs: mballoc enabled
> [ 18.549158] EXT4-fs (md2): mounted filesystem with ordered data mode
> [ 19.144714] NET: Registered protocol family 15
> [ 19.185895] alg: No test for cipher_null (cipher_null-generic)
> [ 19.186098] alg: No test for ecb(cipher_null) (ecb-cipher_null)
> [ 19.186249] alg: No test for digest_null (digest_null-generic)
> [ 19.186392] alg: No test for compress_null (compress_null-generic)
> [ 19.231656] padlock: VIA PadLock Hash Engine not detected.
> [ 19.290450] padlock: VIA PadLock Hash Engine not detected.
> [ 19.332886] padlock: VIA PadLock not detected.
> [ 19.388573] Intel AES-NI instructions are not detected.
> [ 21.104592] e1000e 0000:0d:00.0: irq 27 for MSI/MSI-X
> [ 21.160215] e1000e 0000:0d:00.0: irq 27 for MSI/MSI-X
> [ 21.161362] ADDRCONF(NETDEV_UP): eth0: link is not ready
> [ 21.492599] JBD: barrier-based sync failed on md1:8 - disabling barriers
> [ 21.673162] RPC: Registered udp transport module.
> [ 21.673291] RPC: Registered tcp transport module.
> [ 21.721900] Slow work thread pool: Starting up
> [ 21.744076] Slow work thread pool: Ready
> [ 21.744256] FS-Cache: Loaded
> [ 21.790627] FS-Cache: Netfs 'nfs' registered for caching
> [ 21.925374] Installing knfsd (copyright (C) 1996 [email protected]).
> [ 22.186919] ttyS1: LSR safety check engaged!
> [ 22.187525] ttyS1: LSR safety check engaged!
> [ 23.538992] SMsC 37B787 watchdog component driver 1.1 initialising...
> [ 23.540257] smsc37b787_wdt: Timeout set to 60 second(s).
> [ 23.540385] smsc37b787_wdt: Watchdog initialized and sleeping (nowayout=0)...
> [ 25.466263] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
> [ 27.817247] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
> [ 27.818583] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
> [ 33.566372] lp: driver loaded but no devices found
> [ 33.597855] ppdev: user-space parallel port driver
> [ 36.841378] svc: failed to register lockdv1 RPC service (errno 97).
> [ 36.842221] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
> [ 36.856897] NFSD: starting 90-second grace period
> [ 38.393408] eth0: no IPv6 routers present
> [ 40.527714] JBD: barrier-based sync failed on md2:8 - disabling barriers
> [ 94.384626] e1000e 0000:0f:00.0: irq 29 for MSI/MSI-X
> [ 94.440188] e1000e 0000:0f:00.0: irq 29 for MSI/MSI-X
> [ 94.441496] ADDRCONF(NETDEV_UP): eth1: link is not ready
> [ 94.585688] PPP generic driver version 2.4.2
> [ 98.806893] e1000e: eth1 NIC Link is Up 100 Mbps Full Duplex, Flow Control: None
> [ 98.807049] 0000:0f:00.0: eth1: 10/100 speed: disabling TSO
> [ 98.807867] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
> [ 99.869818] NET: Registered protocol family 24
> [ 101.968714] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
> [ 101.969167] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
> [ 101.969322] nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
> [ 101.969469] sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
> [ 102.117949] ip_tables: (C) 2000-2006 Netfilter Core Team
> [ 109.317030] eth1: no IPv6 routers present
>
>
>
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to [email protected]
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
>
>
> [ 0.184098] pci 0000:00:1c.0: BAR 13: can't allocate resource
When does this message appear? Does it matter if the PCIe card is
installed or not? This 0000:00:1c.0 device is:
> 00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 02)
so it might be relevant.
Did you try all the PCIe slots?
On Thu, 2009-12-17 at 14:43 -0800, Roland Dreier wrote:
> > [ 0.184098] pci 0000:00:1c.0: BAR 13: can't allocate resource
>
> When does this message appear? Does it matter if the PCIe card is
> installed or not? This 0000:00:1c.0 device is:
>
> > 00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 02)
>
> so it might be relevant.
>
> Did you try all the PCIe slots?
No. I'll try that as soon as I can stop it for a while.
BTW, it there any problem putting a PCIe x1 card into a x4 or x16 slot ?
Thanks.
Xav
Xavier Bestel <[email protected]> writes:
>> I first plugged a wifi PCI card into a PCI-X slot (there's no PCI slot),
>> it didn't appear in lspci. As I thought it was a voltage problem (PCI-X
>> only accept 3.3v, not 5v IIRC)
The card has to force 33 MHz non-PCI-X mode. I'd check if the "pins" 38B
(PCIXCAP) and 49B (M66EN) are both connected to GND. Also you can try
inserting another PCI card into another PCI-X slot (in the same bus
segment), this may force 33 PCI mode (check if the other card is
detected).
--
Krzysztof Halasa
On Thu, 2009-12-17 at 14:43 -0800, Roland Dreier wrote:
> > [ 0.184098] pci 0000:00:1c.0: BAR 13: can't allocate resource
>
> When does this message appear? Does it matter if the PCIe card is
> installed or not? This 0000:00:1c.0 device is:
>
> > 00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 02)
>
> so it might be relevant.
>
> Did you try all the PCIe slots?
I tried another slot, and it gave the same error:
[ 0.203279] PCI: Using ACPI for IRQ routing
[ 0.203279] pci 0000:00:1c.0: BAR 13: can't allocate resource
And the card still isn't visible through lspci.
How comes the kernel can't see that card ?
Xav
On Tue, 2009-12-22 at 11:30 +0100, Xavier Bestel wrote:
> On Thu, 2009-12-17 at 14:43 -0800, Roland Dreier wrote:
> > > [ 0.184098] pci 0000:00:1c.0: BAR 13: can't allocate resource
> >
> > When does this message appear? Does it matter if the PCIe card is
> > installed or not? This 0000:00:1c.0 device is:
> >
> > > 00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 02)
> >
> > so it might be relevant.
> >
> > Did you try all the PCIe slots?
>
> I tried another slot, and it gave the same error:
> [ 0.203279] PCI: Using ACPI for IRQ routing
> [ 0.203279] pci 0000:00:1c.0: BAR 13: can't allocate resource
>
> And the card still isn't visible through lspci.
>
> How comes the kernel can't see that card ?
It looks like if the board has been flashed with the wrong bios (the
dmidecode info isn't consistent with what I see on the board).
Is there a way to workaround that in the kernel ?
Xav
> It looks like if the board has been flashed with the wrong bios (the
> dmidecode info isn't consistent with what I see on the board).
> Is there a way to workaround that in the kernel ?
Wrong BIOS is pretty fundamental -- the BIOS could have messed up many
undocumented (and possibly write-once) register settings etc. The
kernel can work around slighly broken ACPI tables or things like that,
but if, say, undocumented write-only north bridge registers are wrong,
not much we can do about that.
Really you better just get the right BIOS on the board.
- R.
On Thu, 2009-12-24 at 08:01 -0800, Roland Dreier wrote:
> > It looks like if the board has been flashed with the wrong bios (the
> > dmidecode info isn't consistent with what I see on the board).
> > Is there a way to workaround that in the kernel ?
>
> Wrong BIOS is pretty fundamental -- the BIOS could have messed up many
> undocumented (and possibly write-once) register settings etc. The
> kernel can work around slighly broken ACPI tables or things like that,
> but if, say, undocumented write-only north bridge registers are wrong,
> not much we can do about that.
>
> Really you better just get the right BIOS on the board.
Well, after a bit of googling and searching in tyan.com (ftp and http),
it seems I'm out of luck: it's an OEM mobo, unsupported by Tyan. BIOS is
nowhere to be found.
As it looks like some other (supported) board has the same components
(S5211 for the curious), maybe I'll try to flash its BIOS if I get
bored.
Thanks, happy $CELEBRATION,
Xav
On Fri, 2009-12-18 at 16:26 +0100, Krzysztof Halasa wrote:
> Xavier Bestel <[email protected]> writes:
>
> >> I first plugged a wifi PCI card into a PCI-X slot (there's no PCI slot),
> >> it didn't appear in lspci. As I thought it was a voltage problem (PCI-X
> >> only accept 3.3v, not 5v IIRC)
>
> The card has to force 33 MHz non-PCI-X mode. I'd check if the "pins" 38B
> (PCIXCAP) and 49B (M66EN) are both connected to GND. Also you can try
> inserting another PCI card into another PCI-X slot (in the same bus
> segment), this may force 33 PCI mode (check if the other card is
> detected).
BTW, when I try 2 PCI cards in both PCI-X slots, the machine doesn't
start (it stays in soft-off state).
Xav