This device declares itself to be vendor specific
It therefore needs to be added to the device table
to make btusb bind.
Signed-off-by: Cho, Yu-Chen <[email protected]>
---
drivers/bluetooth/btusb.c | 4 ++++
1 files changed, 4 insertions(+), 0 deletions(-)
diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index abfc4ee..be01260 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -97,6 +97,10 @@ static struct usb_device_id btusb_table[] = {
/* Ericsson with non-standard id */
{ USB_DEVICE(0x0bdb, 0x1002) },
+ /* Broadcom 20702 Bluetooth 4.0 Adapter */
+ /* Broadcom Valentine 802.11bgn 1x1 Combo HMC */
+ { USB_DEVICE(0x0a5c, 0x21e3) },
+
/* Canyon CN-BTU1 with HID interfaces */
{ USB_DEVICE(0x0c10, 0x0000) },
--
1.7.3.4
Hi Yu-Chen,
* Cho, Yu-Chen <[email protected]> [2011-11-01 17:33:05 +0800]:
> This device declares itself to be vendor specific
> It therefore needs to be added to the device table
> to make btusb bind.
>
> Signed-off-by: Cho, Yu-Chen <[email protected]>
> ---
> drivers/bluetooth/btusb.c | 4 ++++
> 1 files changed, 4 insertions(+), 0 deletions(-)
Ok, but where is the output of usb-devices that I asked. Thanks.
Gustavo
Those devices declare themselves to be vendor specific
It therefore needs to be added to the device table
to make btusb bind.
Signed-off-by: Cho, Yu-Chen <[email protected]>
---
drivers/bluetooth/btusb.c | 6 ++++++
1 files changed, 6 insertions(+), 0 deletions(-)
diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index 8583aee..bc8f850 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -100,6 +100,12 @@ static struct usb_device_id btusb_table[] = {
/* Broadcom Valentine 802.11bgn 1x1 Combo HMC */
{ USB_DEVICE(0x0a5c, 0x21e3) },
+ { USB_DEVICE(0x03f0, 0x2a1d) },
+ { USB_DEVICE(0x03f0, 0x231d) },
+
+ /* BCM2070 Bluetooth 2.1 + EDR */
+ { USB_DEVICE(0x0a5c, 0x21b4) },
+
/* Canyon CN-BTU1 with HID interfaces */
{ USB_DEVICE(0x0c10, 0x0000) },
--
1.7.3.4
Fixed the device VID:PID typo 05ac:21e1 to 0a5c:21e1
Signed-off-by: Cho, Yu-Chen <[email protected]>
---
drivers/bluetooth/btusb.c | 5 ++---
1 files changed, 2 insertions(+), 3 deletions(-)
diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index be01260..8583aee 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -60,9 +60,6 @@ static struct usb_device_id btusb_table[] = {
/* Generic Bluetooth USB device */
{ USB_DEVICE_INFO(0xe0, 0x01, 0x01) },
- /* Broadcom SoftSailing reporting vendor specific */
- { USB_DEVICE(0x05ac, 0x21e1) },
-
/* Apple MacBookPro 7,1 */
{ USB_DEVICE(0x05ac, 0x8213) },
@@ -98,6 +95,8 @@ static struct usb_device_id btusb_table[] = {
{ USB_DEVICE(0x0bdb, 0x1002) },
/* Broadcom 20702 Bluetooth 4.0 Adapter */
+ /* Broadcom SoftSailing reporting vendor specific */
+ { USB_DEVICE(0x0a5c, 0x21e1) },
/* Broadcom Valentine 802.11bgn 1x1 Combo HMC */
{ USB_DEVICE(0x0a5c, 0x21e3) },
--
1.7.3.4
Hi Gustavo,
Sorry I lost and late to reply this mail.
On Wed, Nov 2, 2011 at 12:15 AM, Gustavo Padovan <[email protected]> wrote:
> Hi Yu-Chen,
>
> * Cho, Yu-Chen <[email protected]> [2011-11-01 17:33:05 +0800]:
>
>> This device declares itself to be vendor specific
>> It therefore needs to be added to the device table
>> to make btusb bind.
>>
>> Signed-off-by: Cho, Yu-Chen <[email protected]>
>> ---
>> ?drivers/bluetooth/btusb.c | ? ?4 ++++
>> ?1 files changed, 4 insertions(+), 0 deletions(-)
>
> Ok, but where is the output of usb-devices that I asked. Thanks.
>
> ? ? ? ? Gustavo
>
T: Bus=01 Lev=02 Prnt=02 Port=03 Cnt=01 Dev#= 3 Spd=12 MxCh= 0
D: Ver= 2.00 Cls=ff(vend.) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=0a5c ProdID=21e3 Rev= 1.12
S: Manufacturer=Broadcom Corp
S: Product=BCM20702A0
S: SerialNumber=889FFAABE086
C:* #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr= 0mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb
E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
I: If#= 1 Alt= 1 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms
I: If#= 1 Alt= 2 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms
I: If#= 1 Alt= 3 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms
I: If#= 1 Alt= 4 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms
I: If#= 1 Alt= 5 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms
I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E: Ad=84(I) Atr=02(Bulk) MxPS= 32 Ivl=0ms
E: Ad=04(O) Atr=02(Bulk) MxPS= 32 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 0 Cls=fe(app. ) Sub=01 Prot=01 Driver=(none)
Please correct me if i got any mistake.
Sincerely,
AL