Hi Alex,
> > this looks very weird. Give us more information about your hardware and
> > what kind of dongle you are using.
>
> Dongle : with CSR Chip, Seller WIDCOMM
>
> hciconfig -a
> hci0: Type: USB
> BD Address: 08:00:17:13:82:61 ACL MTU: 339:4 SCO MTU: 60:9
> UP RUNNING PSCAN ISCAN
> RX bytes:128797 acl:0 sco:37800 events:14 errors:0
> TX bytes:300 acl:0 sco:0 commands:13 errors:0
> Features: 0xff 0x3a 0x05 0x00 0x00 0x00 0x00 0x00
> Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3
> Link policy: HOLD SNIFF PARK
> Link mode: SLAVE ACCEPT
> Name: 'welpix-0'
> Class: 0x000100
> Service Classes: Unspecified
> Device Class: Computer, Uncategorized
> HCI Ver: 1.1 (0x1) HCI Rev: 0x178 LMP Ver: 1.1 (0x1) LMP Subver: 0x178
> Manufacturer: RTX Telecom A/S (21)
there is no CSR chip in this dongle.
> System: AMD Duron 1600
> ASROCK Motherboard with SIS USB-Controller
What is the content of /proc/bus/usb/devices with the dongle attached?
> Kernel with Bluez-modules and USB drivers
Use patch-2.6.6-mh1 to prevent some USB related bugs.
Regards
Marcel
-------------------------------------------------------
This SF.Net email is sponsored by: Oracle 10g
Get certified on the hottest thing ever to hit the market... Oracle 10g.
Take an Oracle 10g class now, and we'll give you the exam FREE.
http://ads.osdn.com/?ad_id=3149&alloc_id=8166&op=click
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users
Hi Alex,
> T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 3 Spd=12 MxCh= 0
> D: Ver= 1.10 Cls=e0(unk. ) Sub=01 Prot=01 MxPS= 8 #Cfgs= 1
> P: Vendor=0400 ProdID=0807 Rev= 1.00
> C:* #Ifs= 2 Cfg#= 1 Atr=80 MxPwr=500mA
> I: If#= 0 Alt= 0 #EPs= 3 Cls=e0(unk. ) Sub=01 Prot=01 Driver=hci_usb
> E: Ad=81(I) Atr=03(Int.) MxPS= 64 Ivl=1ms
> E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
> E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
> I: If#= 1 Alt= 0 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=(none)
> E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
> E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
> I: If#= 1 Alt= 1 #EPs= 2 Cls=00(>ifc ) Sub=00 Prot=00 Driver=(none)
> E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms
> E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms
> I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=(none)
> E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms
> E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms
> I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=(none)
> E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms
> E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms
> I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=(none)
> E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms
> E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms
> I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=(none)
> E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms
> E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms
the Cls=00(>ifc ) looks very wrong to me. Should I blacklist the SCO
support for this dongle? You don't wanna buy yourself a new Bluetooth
dongle and donate this for more tests?
Regards
Marcel
-------------------------------------------------------
This SF.Net email is sponsored by: Oracle 10g
Get certified on the hottest thing ever to hit the market... Oracle 10g.
Take an Oracle 10g class now, and we'll give you the exam FREE.
http://ads.osdn.com/?ad_id=3149&alloc_id=8166&op=click
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users
Am Freitag, 21. Mai 2004 21:20 schrieben Sie:
> Hi Alex,
>
> > > However disable CONFIG_BT_HCIUSB_SCO and try again.
> >
> > That was it, the dongle is running.
>
> send us the full /proc/bus/usb/devices from your system. I think we have
> to blacklist the SCO support for this device.
>
Sorry my emailclient has the mailinglist marked as spam.
Here my /proc/bus/usb/devices :
T: Bus=03 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 6
B: Alloc= 0/800 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 2.06
S: Manufacturer=Linux 2.6.6-mh1 ehci_hcd
S: Product=Silicon Integrated Systems [SiS] USB 2.0 Controller
S: SerialNumber=0000:00:03.2
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=256ms
T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 3
B: Alloc= 60/900 us ( 7%), #Int= 1, #Iso= 0
D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 2.06
S: Manufacturer=Linux 2.6.6-mh1 ohci_hcd
S: Product=Silicon Integrated Systems [SiS] USB 1.0 Controller (#2)
S: SerialNumber=0000:00:03.1
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 3 Spd=12 MxCh= 0
D: Ver= 1.10 Cls=e0(unk. ) Sub=01 Prot=01 MxPS= 8 #Cfgs= 1
P: Vendor=0400 ProdID=0807 Rev= 1.00
C:* #Ifs= 2 Cfg#= 1 Atr=80 MxPwr=500mA
I: If#= 0 Alt= 0 #EPs= 3 Cls=e0(unk. ) Sub=01 Prot=01 Driver=hci_usb
E: Ad=81(I) Atr=03(Int.) MxPS= 64 Ivl=1ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I: If#= 1 Alt= 0 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=(none)
E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
I: If#= 1 Alt= 1 #EPs= 2 Cls=00(>ifc ) Sub=00 Prot=00 Driver=(none)
E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms
I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=(none)
E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms
I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=(none)
E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms
I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=(none)
E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms
I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=(none)
E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms
T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 3
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 2.06
S: Manufacturer=Linux 2.6.6-mh1 ohci_hcd
S: Product=Silicon Integrated Systems [SiS] USB 1.0 Controller
S: SerialNumber=0000:00:03.0
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
Best regards
Alex
Hi Alex,
> > However disable CONFIG_BT_HCIUSB_SCO and try again.
>
> That was it, the dongle is running.
send us the full /proc/bus/usb/devices from your system. I think we have
to blacklist the SCO support for this device.
Regards
Marcel
-------------------------------------------------------
This SF.Net email is sponsored by: Oracle 10g
Get certified on the hottest thing ever to hit the market... Oracle 10g.
Take an Oracle 10g class now, and we'll give you the exam FREE.
http://ads.osdn.com/?ad_id=3149&alloc_id=8166&op=click
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users
Am Freitag, 21. Mai 2004 19:42 schrieben Sie:
> Hi Alex,
>
> > > there is no CSR chip in this dongle.
> >
> > KMelektronik cheat, thats not fine.
>
> yes they did. Where do you bought it? If the error still exists after
> disabling SCO support I must try to get one of these.
>
> > > What is the content of /proc/bus/usb/devices with the dongle attached?
> >
> > E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
> > E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
> > I: If#= 1 Alt= 0 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=hci_usb
> > E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
> > E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
> > I: If#= 1 Alt= 1 #EPs= 2 Cls=00(>ifc ) Sub=00 Prot=00 Driver=hci_usb
> > E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms
> > E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms
> > I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=hci_usb
> > E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms
> > E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms
> > I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=hci_usb
> > E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms
> > E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms
> > I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=hci_usb
> > E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms
> > E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms
> > I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=hci_usb
> > E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms
> > E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms
>
> You missed some information at the top.
>
> > > > Kernel with Bluez-modules and USB drivers
> > >
> > > Use patch-2.6.6-mh1 to prevent some USB related bugs.
> >
> > I use the patch ( I did it like the description), so that was my last
> > hope to find the error by myself
>
> If you already use 2.6.6-mh1 then it is good to say that ;)
>
> However disable CONFIG_BT_HCIUSB_SCO and try again.
That was it, the dongle is running.
Thank you very much for your help.
Best Regards
Alex
Salut BlueZ!
On Fri, May 21, 2004 at 07:26:03PM +0200, Marcel Holtmann wrote:
> Use patch-2.6.6-mh1 to prevent some USB related bugs.
FWIW I needed bk-usb.patch from -mm2:
http://www.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.6/2.6.6-mm2/broken-out/
as well when I tried 2.6.6
--
_ [email protected] -+*+- fou, con et anglais _
(_) "A computer's got to do what a computer's got to do." (_)
(_) -Holly. (_)
\___ ___/
-------------------------------------------------------
This SF.Net email is sponsored by: Oracle 10g
Get certified on the hottest thing ever to hit the market... Oracle 10g.
Take an Oracle 10g class now, and we'll give you the exam FREE.
http://ads.osdn.com/?ad_id=3149&alloc_id=8166&op=click
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users
Hi Alex,
> > there is no CSR chip in this dongle.
>
> KMelektronik cheat, thats not fine.
yes they did. Where do you bought it? If the error still exists after
disabling SCO support I must try to get one of these.
> > What is the content of /proc/bus/usb/devices with the dongle attached?
>
> E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
> E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
> I: If#= 1 Alt= 0 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=hci_usb
> E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
> E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
> I: If#= 1 Alt= 1 #EPs= 2 Cls=00(>ifc ) Sub=00 Prot=00 Driver=hci_usb
> E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms
> E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms
> I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=hci_usb
> E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms
> E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms
> I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=hci_usb
> E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms
> E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms
> I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=hci_usb
> E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms
> E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms
> I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=hci_usb
> E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms
> E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms
You missed some information at the top.
> > > Kernel with Bluez-modules and USB drivers
> >
> > Use patch-2.6.6-mh1 to prevent some USB related bugs.
>
> I use the patch ( I did it like the description), so that was my last hope to
> find the error by myself
If you already use 2.6.6-mh1 then it is good to say that ;)
However disable CONFIG_BT_HCIUSB_SCO and try again.
Regards
Marcel
-------------------------------------------------------
This SF.Net email is sponsored by: Oracle 10g
Get certified on the hottest thing ever to hit the market... Oracle 10g.
Take an Oracle 10g class now, and we'll give you the exam FREE.
http://ads.osdn.com/?ad_id=3149&alloc_id=8166&op=click
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users
Am Freitag, 21. Mai 2004 19:26 schrieben Sie:
> Hi Alex,
>
> > > this looks very weird. Give us more information about your hardware and
> > > what kind of dongle you are using.
> >
> > Dongle : with CSR Chip, Seller WIDCOMM
> >
> > hciconfig -a
> > hci0: Type: USB
> > BD Address: 08:00:17:13:82:61 ACL MTU: 339:4 SCO MTU: 60:9
> > UP RUNNING PSCAN ISCAN
> > RX bytes:128797 acl:0 sco:37800 events:14 errors:0
> > TX bytes:300 acl:0 sco:0 commands:13 errors:0
> > Features: 0xff 0x3a 0x05 0x00 0x00 0x00 0x00 0x00
> > Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3
> > Link policy: HOLD SNIFF PARK
> > Link mode: SLAVE ACCEPT
> > Name: 'welpix-0'
> > Class: 0x000100
> > Service Classes: Unspecified
> > Device Class: Computer, Uncategorized
> > HCI Ver: 1.1 (0x1) HCI Rev: 0x178 LMP Ver: 1.1 (0x1) LMP Subver:
> > 0x178 Manufacturer: RTX Telecom A/S (21)
>
> there is no CSR chip in this dongle.
KMelektronik cheat, thats not fine.
>
> > System: AMD Duron 1600
> > ASROCK Motherboard with SIS USB-Controller
>
> What is the content of /proc/bus/usb/devices with the dongle attached?
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I: If#= 1 Alt= 0 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=hci_usb
E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
I: If#= 1 Alt= 1 #EPs= 2 Cls=00(>ifc ) Sub=00 Prot=00 Driver=hci_usb
E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms
I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=hci_usb
E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms
I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=hci_usb
E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms
I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=hci_usb
E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms
I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=hci_usb
E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms
T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 3
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 2.06
S: Manufacturer=Linux 2.6.6 ohci_hcd
S: Product=Silicon Integrated Systems [SiS] USB 1.0 Controller
S: SerialNumber=0000:00:03.0
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=82(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
>
> > Kernel with Bluez-modules and USB drivers
>
> Use patch-2.6.6-mh1 to prevent some USB related bugs.
I use the patch ( I did it like the description), so that was my last hope to
find the error by myself
In KDE Shell I cannot plug in, plug out, plug in the dongle, is only found by
the first attemp.
>
> Regards
>
> Marcel
Best Regards
Alex