This patchset finishes the work to make channels work on a KHz offset,
and includes the initial definitions for S1G (802.11ah).
These patches on top of wt-2020-04-29 with hostap c54a5e96b505 gives the
following hwsim test results:
Failed even on retry:
fst_dynamic_iface_attach wpas_config_file proxyarp_open_ebtables
TOTAL=3532 PASS=3265 FAIL=13 SKIP=251
Which is what we currently expect of HEAD.
Changes from v4:
- don't use float to print khz frequency
- zero out center_freq1_offset if not supplied with center_freq1
Thomas Pedersen (5):
cfg80211: add KHz variants of frame RX API
nl80211: add KHz frequency offset for most wifi commands
nl80211: support scan frequencies in KHz
ieee80211: S1G defines
nl80211: S1G band and channel definitions
include/linux/ieee80211.h | 223 +++++++++++++++++++++++++++++++++++
include/net/cfg80211.h | 71 ++++++++++-
include/uapi/linux/nl80211.h | 77 +++++++++---
net/mac80211/chan.c | 7 +-
net/mac80211/main.c | 2 +
net/mac80211/rx.c | 8 +-
net/mac80211/scan.c | 1 +
net/mac80211/tx.c | 5 +
net/mac80211/util.c | 5 +
net/wireless/chan.c | 29 +++++
net/wireless/core.c | 5 +-
net/wireless/mlme.c | 8 +-
net/wireless/nl80211.c | 140 ++++++++++++++++------
net/wireless/trace.h | 12 +-
net/wireless/util.c | 8 ++
15 files changed, 526 insertions(+), 75 deletions(-)
--
2.20.1
If the driver advertises NL80211_EXT_FEATURE_SCAN_FREQ_KHZ
userspace can omit NL80211_ATTR_SCAN_FREQUENCIES in favor
of an NL80211_ATTR_SCAN_FREQ_KHZ. To get scan results in
KHz userspace must also set the
NL80211_SCAN_FLAG_FREQ_KHZ.
This lets nl80211 remain compatible with older userspaces
while not requring and sending redundant (and potentially
incorrect) scan frequency sets.
Signed-off-by: Thomas Pedersen <[email protected]>
---
v3:
- report SCAN_FREQ_KHZ in scan results
- advertise SCAN_FREQ_KHZ support in feature flag
- add SCAN_FLAG_FREQ_KHZ so user can select scan result
frequency units
---
include/uapi/linux/nl80211.h | 13 ++++++++-
net/mac80211/main.c | 2 ++
net/wireless/nl80211.c | 52 +++++++++++++++++++++++++++---------
3 files changed, 54 insertions(+), 13 deletions(-)
diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h
index 0ceb4de52d9a..b6012aa5103b 100644
--- a/include/uapi/linux/nl80211.h
+++ b/include/uapi/linux/nl80211.h
@@ -2492,7 +2492,7 @@ enum nl80211_commands {
* an %NL80211_ATTR_WIPHY_FREQ_OFFSET.
* @NL80211_ATTR_CENTER_FREQ1_OFFSET: Center frequency offset in KHz for the
* first channel segment specified in %NL80211_ATTR_CENTER_FREQ1.
- *
+ * @NL80211_ATTR_SCAN_FREQ_KHZ: nested attribute with KHz frequencies
*
* @NUM_NL80211_ATTR: total number of nl80211_attrs available
* @NL80211_ATTR_MAX: highest attribute number currently defined
@@ -2972,6 +2972,7 @@ enum nl80211_attrs {
NL80211_ATTR_RECEIVE_MULTICAST,
NL80211_ATTR_WIPHY_FREQ_OFFSET,
NL80211_ATTR_CENTER_FREQ1_OFFSET,
+ NL80211_ATTR_SCAN_FREQ_KHZ,
/* add attributes here, update the policy in nl80211.c */
@@ -5721,6 +5722,11 @@ enum nl80211_feature_flags {
* @NL80211_EXT_FEATURE_MULTICAST_REGISTRATIONS: management frame registrations
* are possible for multicast frames and those will be reported properly.
*
+ * @NL80211_EXT_FEATURE_SCAN_FREQ_KHZ: This driver supports receiving and
+ * reporting scan request with %NL80211_ATTR_SCAN_FREQ_KHZ. In order to
+ * report %NL80211_ATTR_SCAN_FREQ_KHZ, %NL80211_SCAN_FLAG_FREQ_KHZ must be
+ * included in the scan request.
+ *
* @NUM_NL80211_EXT_FEATURES: number of extended features.
* @MAX_NL80211_EXT_FEATURES: highest extended feature index.
*/
@@ -5774,6 +5780,7 @@ enum nl80211_ext_feature_index {
NL80211_EXT_FEATURE_DEL_IBSS_STA,
NL80211_EXT_FEATURE_MULTICAST_REGISTRATIONS,
NL80211_EXT_FEATURE_BEACON_PROTECTION_CLIENT,
+ NL80211_EXT_FEATURE_SCAN_FREQ_KHZ,
/* add new features before the definition below */
NUM_NL80211_EXT_FEATURES,
@@ -5885,6 +5892,9 @@ enum nl80211_timeout_reason {
* @NL80211_SCAN_FLAG_MIN_PREQ_CONTENT: minimize probe request content to
* only have supported rates and no additional capabilities (unless
* added by userspace explicitly.)
+ * @NL80211_SCAN_FLAG_FREQ_KHZ: report scan results with
+ * %NL80211_ATTR_SCAN_FREQ_KHZ. This also means
+ * %NL80211_ATTR_SCAN_FREQUENCIES will not be included.
*/
enum nl80211_scan_flags {
NL80211_SCAN_FLAG_LOW_PRIORITY = 1<<0,
@@ -5900,6 +5910,7 @@ enum nl80211_scan_flags {
NL80211_SCAN_FLAG_HIGH_ACCURACY = 1<<10,
NL80211_SCAN_FLAG_RANDOM_SN = 1<<11,
NL80211_SCAN_FLAG_MIN_PREQ_CONTENT = 1<<12,
+ NL80211_SCAN_FLAG_FREQ_KHZ = 1<<13,
};
/**
diff --git a/net/mac80211/main.c b/net/mac80211/main.c
index 06c90d360633..ac74bd780b42 100644
--- a/net/mac80211/main.c
+++ b/net/mac80211/main.c
@@ -596,6 +596,8 @@ struct ieee80211_hw *ieee80211_alloc_hw_nm(size_t priv_data_len,
NL80211_EXT_FEATURE_CONTROL_PORT_OVER_NL80211);
wiphy_ext_feature_set(wiphy,
NL80211_EXT_FEATURE_CONTROL_PORT_NO_PREAUTH);
+ wiphy_ext_feature_set(wiphy,
+ NL80211_EXT_FEATURE_SCAN_FREQ_KHZ);
if (!ops->hw_scan) {
wiphy->features |= NL80211_FEATURE_LOW_PRIORITY_SCAN |
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index a4ac9b38d0f2..14948cc70587 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -664,6 +664,7 @@ const struct nla_policy nl80211_policy[NUM_NL80211_ATTR] = {
[NL80211_ATTR_PMK_REAUTH_THRESHOLD] = NLA_POLICY_RANGE(NLA_U8, 1, 100),
[NL80211_ATTR_RECEIVE_MULTICAST] = { .type = NLA_FLAG },
[NL80211_ATTR_WIPHY_FREQ_OFFSET] = NLA_POLICY_RANGE(NLA_U32, 0, 999),
+ [NL80211_ATTR_SCAN_FREQ_KHZ] = { .type = NLA_NESTED },
};
/* policy for the key attributes */
@@ -7764,6 +7765,8 @@ static int nl80211_trigger_scan(struct sk_buff *skb, struct genl_info *info)
struct cfg80211_registered_device *rdev = info->user_ptr[0];
struct wireless_dev *wdev = info->user_ptr[1];
struct cfg80211_scan_request *request;
+ struct nlattr *scan_freqs = NULL;
+ bool scan_freqs_khz = false;
struct nlattr *attr;
struct wiphy *wiphy;
int err, tmp, n_ssids = 0, n_channels, i;
@@ -7782,9 +7785,17 @@ static int nl80211_trigger_scan(struct sk_buff *skb, struct genl_info *info)
goto unlock;
}
- if (info->attrs[NL80211_ATTR_SCAN_FREQUENCIES]) {
- n_channels = validate_scan_freqs(
- info->attrs[NL80211_ATTR_SCAN_FREQUENCIES]);
+ if (info->attrs[NL80211_ATTR_SCAN_FREQ_KHZ]) {
+ if (!wiphy_ext_feature_isset(wiphy,
+ NL80211_EXT_FEATURE_SCAN_FREQ_KHZ))
+ return -EOPNOTSUPP;
+ scan_freqs = info->attrs[NL80211_ATTR_SCAN_FREQ_KHZ];
+ scan_freqs_khz = true;
+ } else if (info->attrs[NL80211_ATTR_SCAN_FREQUENCIES])
+ scan_freqs = info->attrs[NL80211_ATTR_SCAN_FREQUENCIES];
+
+ if (scan_freqs) {
+ n_channels = validate_scan_freqs(scan_freqs);
if (!n_channels) {
err = -EINVAL;
goto unlock;
@@ -7832,13 +7843,16 @@ static int nl80211_trigger_scan(struct sk_buff *skb, struct genl_info *info)
}
i = 0;
- if (info->attrs[NL80211_ATTR_SCAN_FREQUENCIES]) {
+ if (scan_freqs) {
/* user specified, bail out if channel not found */
- nla_for_each_nested(attr, info->attrs[NL80211_ATTR_SCAN_FREQUENCIES], tmp) {
+ nla_for_each_nested(attr, scan_freqs, tmp) {
struct ieee80211_channel *chan;
+ int freq = nla_get_u32(attr);
- chan = ieee80211_get_channel(wiphy, nla_get_u32(attr));
+ if (!scan_freqs_khz)
+ freq = MHZ_TO_KHZ(freq);
+ chan = ieee80211_get_channel_khz(wiphy, freq);
if (!chan) {
err = -EINVAL;
goto out_free;
@@ -15273,14 +15287,28 @@ static int nl80211_add_scan_req(struct sk_buff *msg,
}
nla_nest_end(msg, nest);
- nest = nla_nest_start_noflag(msg, NL80211_ATTR_SCAN_FREQUENCIES);
- if (!nest)
- goto nla_put_failure;
- for (i = 0; i < req->n_channels; i++) {
- if (nla_put_u32(msg, i, req->channels[i]->center_freq))
+ if (req->flags & NL80211_SCAN_FLAG_FREQ_KHZ) {
+ nest = nla_nest_start_noflag(msg,
+ NL80211_ATTR_SCAN_FREQ_KHZ);
+ if (!nest)
+ goto nla_put_failure;
+ for (i = 0; i < req->n_channels; i++) {
+ if (nla_put_u32(msg, i,
+ ieee80211_channel_to_khz(req->channels[i])))
+ goto nla_put_failure;
+ }
+ nla_nest_end(msg, nest);
+ } else {
+ nest = nla_nest_start_noflag(msg,
+ NL80211_ATTR_SCAN_FREQUENCIES);
+ if (!nest)
goto nla_put_failure;
+ for (i = 0; i < req->n_channels; i++) {
+ if (nla_put_u32(msg, i, req->channels[i]->center_freq))
+ goto nla_put_failure;
+ }
+ nla_nest_end(msg, nest);
}
- nla_nest_end(msg, nest);
if (req->ie &&
nla_put(msg, NL80211_ATTR_IE, req->ie_len, req->ie))
--
2.20.1
Gives drivers the definitions needed to advertise support
for S1G bands.
Signed-off-by: Thomas Pedersen <[email protected]>
---
include/net/cfg80211.h | 17 +++++++++++++++++
include/uapi/linux/nl80211.h | 16 ++++++++++++++++
net/mac80211/chan.c | 7 ++++++-
net/mac80211/scan.c | 1 +
net/mac80211/tx.c | 5 +++++
net/mac80211/util.c | 5 +++++
net/wireless/chan.c | 29 +++++++++++++++++++++++++++++
net/wireless/core.c | 5 +++--
net/wireless/util.c | 8 ++++++++
9 files changed, 90 insertions(+), 3 deletions(-)
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index 3746b52c954e..40c3f2fe4167 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -414,6 +414,22 @@ struct ieee80211_edmg {
enum ieee80211_edmg_bw_config bw_config;
};
+/**
+ * struct ieee80211_sta_s1g_cap - STA's S1G capabilities
+ *
+ * This structure describes most essential parameters needed
+ * to describe 802.11ah S1G capabilities for a STA.
+ *
+ * @s1g_supported: is STA an S1G STA
+ * @cap: S1G capabilities information
+ * @nss_mcs: Supported NSS MCS set
+ */
+struct ieee80211_sta_s1g_cap {
+ bool s1g;
+ u8 cap[10]; /* use S1G_CAPAB_ */
+ u8 nss_mcs[5];
+};
+
/**
* struct ieee80211_supported_band - frequency band definition
*
@@ -445,6 +461,7 @@ struct ieee80211_supported_band {
int n_bitrates;
struct ieee80211_sta_ht_cap ht_cap;
struct ieee80211_sta_vht_cap vht_cap;
+ struct ieee80211_sta_s1g_cap s1g_cap;
struct ieee80211_edmg edmg_cap;
u16 n_iftype_data;
const struct ieee80211_sband_iftype_data *iftype_data;
diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h
index b6012aa5103b..332ec138b507 100644
--- a/include/uapi/linux/nl80211.h
+++ b/include/uapi/linux/nl80211.h
@@ -4421,6 +4421,11 @@ enum nl80211_key_mode {
* attribute must be provided as well
* @NL80211_CHAN_WIDTH_5: 5 MHz OFDM channel
* @NL80211_CHAN_WIDTH_10: 10 MHz OFDM channel
+ * @NL80211_CHAN_WIDTH_1: 1 MHz OFDM channel
+ * @NL80211_CHAN_WIDTH_2: 2 MHz OFDM channel
+ * @NL80211_CHAN_WIDTH_4: 4 MHz OFDM channel
+ * @NL80211_CHAN_WIDTH_8: 8 MHz OFDM channel
+ * @NL80211_CHAN_WIDTH_16: 16 MHz OFDM channel
*/
enum nl80211_chan_width {
NL80211_CHAN_WIDTH_20_NOHT,
@@ -4431,6 +4436,11 @@ enum nl80211_chan_width {
NL80211_CHAN_WIDTH_160,
NL80211_CHAN_WIDTH_5,
NL80211_CHAN_WIDTH_10,
+ NL80211_CHAN_WIDTH_1,
+ NL80211_CHAN_WIDTH_2,
+ NL80211_CHAN_WIDTH_4,
+ NL80211_CHAN_WIDTH_8,
+ NL80211_CHAN_WIDTH_16,
};
/**
@@ -4441,11 +4451,15 @@ enum nl80211_chan_width {
* @NL80211_BSS_CHAN_WIDTH_20: control channel is 20 MHz wide or compatible
* @NL80211_BSS_CHAN_WIDTH_10: control channel is 10 MHz wide
* @NL80211_BSS_CHAN_WIDTH_5: control channel is 5 MHz wide
+ * @NL80211_BSS_CHAN_WIDTH_1: control channel is 1 MHz wide
+ * @NL80211_BSS_CHAN_WIDTH_2: control channel is 2 MHz wide
*/
enum nl80211_bss_scan_width {
NL80211_BSS_CHAN_WIDTH_20,
NL80211_BSS_CHAN_WIDTH_10,
NL80211_BSS_CHAN_WIDTH_5,
+ NL80211_BSS_CHAN_WIDTH_1,
+ NL80211_BSS_CHAN_WIDTH_2,
};
/**
@@ -4724,6 +4738,7 @@ enum nl80211_txrate_gi {
* @NL80211_BAND_5GHZ: around 5 GHz band (4.9 - 5.7 GHz)
* @NL80211_BAND_60GHZ: around 60 GHz band (58.32 - 69.12 GHz)
* @NL80211_BAND_6GHZ: around 6 GHz band (5.9 - 7.2 GHz)
+ * @NL80211_BAND_S1GHZ: around 900MHz, supported by S1G PHYs
* @NUM_NL80211_BANDS: number of bands, avoid using this in userspace
* since newer kernel versions may support more bands
*/
@@ -4732,6 +4747,7 @@ enum nl80211_band {
NL80211_BAND_5GHZ,
NL80211_BAND_60GHZ,
NL80211_BAND_6GHZ,
+ NL80211_BAND_S1GHZ,
NUM_NL80211_BANDS,
};
diff --git a/net/mac80211/chan.c b/net/mac80211/chan.c
index e6e192f53e4e..08cf9da9c1e3 100644
--- a/net/mac80211/chan.c
+++ b/net/mac80211/chan.c
@@ -313,9 +313,14 @@ void ieee80211_recalc_chanctx_min_def(struct ieee80211_local *local,
lockdep_assert_held(&local->chanctx_mtx);
- /* don't optimize 5MHz, 10MHz, and radar_enabled confs */
+ /* don't optimize non-20MHz based and radar_enabled confs */
if (ctx->conf.def.width == NL80211_CHAN_WIDTH_5 ||
ctx->conf.def.width == NL80211_CHAN_WIDTH_10 ||
+ ctx->conf.def.width == NL80211_CHAN_WIDTH_1 ||
+ ctx->conf.def.width == NL80211_CHAN_WIDTH_2 ||
+ ctx->conf.def.width == NL80211_CHAN_WIDTH_4 ||
+ ctx->conf.def.width == NL80211_CHAN_WIDTH_8 ||
+ ctx->conf.def.width == NL80211_CHAN_WIDTH_16 ||
ctx->conf.radar_enabled) {
ctx->conf.min_def = ctx->conf.def;
return;
diff --git a/net/mac80211/scan.c b/net/mac80211/scan.c
index 5db15996524f..d3935e308ea3 100644
--- a/net/mac80211/scan.c
+++ b/net/mac80211/scan.c
@@ -906,6 +906,7 @@ static void ieee80211_scan_state_set_channel(struct ieee80211_local *local,
case NL80211_BSS_CHAN_WIDTH_10:
local->scan_chandef.width = NL80211_CHAN_WIDTH_10;
break;
+ default:
case NL80211_BSS_CHAN_WIDTH_20:
/* If scanning on oper channel, use whatever channel-type
* is currently in use.
diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c
index 3dc1990e15c5..cf0ba8d229e4 100644
--- a/net/mac80211/tx.c
+++ b/net/mac80211/tx.c
@@ -80,6 +80,10 @@ static __le16 ieee80211_duration(struct ieee80211_tx_data *tx,
sband = local->hw.wiphy->bands[info->band];
txrate = &sband->bitrates[tx->rate.idx];
+ if (sband->band == NL80211_BAND_S1GHZ)
+ /* TODO */
+ return 0;
+
erp = txrate->flags & IEEE80211_RATE_ERP_G;
/*
@@ -166,6 +170,7 @@ static __le16 ieee80211_duration(struct ieee80211_tx_data *tx,
if (r->flags & IEEE80211_RATE_MANDATORY_A)
mrate = r->bitrate;
break;
+ case NL80211_BAND_S1GHZ:
case NL80211_BAND_60GHZ:
/* TODO, for now fall through */
case NUM_NL80211_BANDS:
diff --git a/net/mac80211/util.c b/net/mac80211/util.c
index 20436c86b9bf..c48e75dfdcdb 100644
--- a/net/mac80211/util.c
+++ b/net/mac80211/util.c
@@ -3456,6 +3456,11 @@ u32 ieee80211_chandef_downgrade(struct cfg80211_chan_def *c)
c->width = NL80211_CHAN_WIDTH_20_NOHT;
ret = IEEE80211_STA_DISABLE_HT | IEEE80211_STA_DISABLE_VHT;
break;
+ case NL80211_CHAN_WIDTH_1:
+ case NL80211_CHAN_WIDTH_2:
+ case NL80211_CHAN_WIDTH_4:
+ case NL80211_CHAN_WIDTH_8:
+ case NL80211_CHAN_WIDTH_16:
case NL80211_CHAN_WIDTH_5:
case NL80211_CHAN_WIDTH_10:
WARN_ON_ONCE(1);
diff --git a/net/wireless/chan.c b/net/wireless/chan.c
index e111c08daa0e..9ceea5f5b891 100644
--- a/net/wireless/chan.c
+++ b/net/wireless/chan.c
@@ -153,6 +153,11 @@ bool cfg80211_chandef_valid(const struct cfg80211_chan_def *chandef)
control_freq = chandef->chan->center_freq;
switch (chandef->width) {
+ case NL80211_CHAN_WIDTH_1:
+ case NL80211_CHAN_WIDTH_2:
+ case NL80211_CHAN_WIDTH_4:
+ case NL80211_CHAN_WIDTH_8:
+ case NL80211_CHAN_WIDTH_16:
case NL80211_CHAN_WIDTH_5:
case NL80211_CHAN_WIDTH_10:
case NL80211_CHAN_WIDTH_20:
@@ -263,6 +268,21 @@ static int cfg80211_chandef_get_width(const struct cfg80211_chan_def *c)
int width;
switch (c->width) {
+ case NL80211_CHAN_WIDTH_1:
+ width = 1;
+ break;
+ case NL80211_CHAN_WIDTH_2:
+ width = 2;
+ break;
+ case NL80211_CHAN_WIDTH_4:
+ width = 4;
+ break;
+ case NL80211_CHAN_WIDTH_8:
+ width = 8;
+ break;
+ case NL80211_CHAN_WIDTH_16:
+ width = 16;
+ break;
case NL80211_CHAN_WIDTH_5:
width = 5;
break;
@@ -911,6 +931,15 @@ bool cfg80211_chandef_usable(struct wiphy *wiphy,
control_freq = chandef->chan->center_freq;
switch (chandef->width) {
+ case NL80211_CHAN_WIDTH_1:
+ width = 1;
+ break;
+ case NL80211_CHAN_WIDTH_2:
+ width = 2;
+ break;
+ case NL80211_CHAN_WIDTH_4:
+ width = 4;
+ break;
case NL80211_CHAN_WIDTH_5:
width = 5;
break;
diff --git a/net/wireless/core.c b/net/wireless/core.c
index b795f363d004..14b617fb160c 100644
--- a/net/wireless/core.c
+++ b/net/wireless/core.c
@@ -800,10 +800,11 @@ int wiphy_register(struct wiphy *wiphy)
if (WARN_ON(!sband->n_channels))
return -EINVAL;
/*
- * on 60GHz band, there are no legacy rates, so
+ * on 60GHz or sub-1Ghz band, there are no legacy rates, so
* n_bitrates is 0
*/
- if (WARN_ON(band != NL80211_BAND_60GHZ &&
+ if (WARN_ON((band != NL80211_BAND_60GHZ &&
+ band != NL80211_BAND_S1GHZ) &&
!sband->n_bitrates))
return -EINVAL;
diff --git a/net/wireless/util.c b/net/wireless/util.c
index df75e58eca5d..3ba1f4873541 100644
--- a/net/wireless/util.c
+++ b/net/wireless/util.c
@@ -100,6 +100,8 @@ u32 ieee80211_channel_to_freq_khz(int chan, enum nl80211_band band)
if (chan < 7)
return MHZ_TO_KHZ(56160 + chan * 2160);
break;
+ case NL80211_BAND_S1GHZ:
+ return 902000 + chan * 500;
default:
;
}
@@ -208,6 +210,12 @@ static void set_mandatory_flags_band(struct ieee80211_supported_band *sband)
WARN_ON(!sband->ht_cap.ht_supported);
WARN_ON((sband->ht_cap.mcs.rx_mask[0] & 0x1e) != 0x1e);
break;
+ case NL80211_BAND_S1GHZ:
+ /* Figure 9-589bd: 3 means unsupported, so != 3 means at least
+ * mandatory is ok.
+ */
+ WARN_ON((sband->s1g_cap.nss_mcs[0] & 0x3) == 0x3);
+ break;
case NUM_NL80211_BANDS:
default:
WARN_ON(1);
--
2.20.1
These are found in IEEE-802.11ah-2016.
Signed-off-by: Thomas Pedersen <[email protected]>
---
include/linux/ieee80211.h | 221 ++++++++++++++++++++++++++++++++++++++
1 file changed, 221 insertions(+)
diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h
index 41d5f000c0d9..f630b8978a43 100644
--- a/include/linux/ieee80211.h
+++ b/include/linux/ieee80211.h
@@ -105,6 +105,51 @@
/* extension, added by 802.11ad */
#define IEEE80211_STYPE_DMG_BEACON 0x0000
+#define IEEE80211_STYPE_S1G_BEACON 0x0010
+
+/* bits unique to S1G beacon */
+#define IEEE80211_S1G_BCN_NEXT_TBTT 0x100
+
+/* see 802.11ah-2016 9.9 NDP CMAC frames */
+#define IEEE80211_S1G_1MHZ_NDP_BITS 25
+#define IEEE80211_S1G_1MHZ_NDP_BYTES 4
+#define IEEE80211_S1G_2MHZ_NDP_BITS 37
+#define IEEE80211_S1G_2MHZ_NDP_BYTES 5
+
+#define IEEE80211_NDP_FTYPE_CTS 0
+#define IEEE80211_NDP_FTYPE_CF_END 0
+#define IEEE80211_NDP_FTYPE_PS_POLL 1
+#define IEEE80211_NDP_FTYPE_ACK 2
+#define IEEE80211_NDP_FTYPE_PS_POLL_ACK 3
+#define IEEE80211_NDP_FTYPE_BA 4
+#define IEEE80211_NDP_FTYPE_BF_REPORT_POLL 5
+#define IEEE80211_NDP_FTYPE_PAGING 6
+#define IEEE80211_NDP_FTYPE_PREQ 7
+
+#define SM64(f, v) ((((u64)v) << f##_S) & f)
+
+/* NDP CMAC frame fields */
+#define IEEE80211_NDP_FTYPE 0x0000000000000007
+#define IEEE80211_NDP_FTYPE_S 0x0000000000000000
+
+/* 1M Probe Request 11ah 9.9.3.1.1 */
+#define IEEE80211_NDP_1M_PREQ_ANO 0x0000000000000008
+#define IEEE80211_NDP_1M_PREQ_ANO_S 3
+#define IEEE80211_NDP_1M_PREQ_CSSID 0x00000000000FFFF0
+#define IEEE80211_NDP_1M_PREQ_CSSID_S 4
+#define IEEE80211_NDP_1M_PREQ_RTYPE 0x0000000000100000
+#define IEEE80211_NDP_1M_PREQ_RTYPE_S 20
+#define IEEE80211_NDP_1M_PREQ_RSV 0x0000000001E00000
+#define IEEE80211_NDP_1M_PREQ_RSV 0x0000000001E00000
+/* 2M Probe Request 11ah 9.9.3.1.2 */
+#define IEEE80211_NDP_2M_PREQ_ANO 0x0000000000000008
+#define IEEE80211_NDP_2M_PREQ_ANO_S 3
+#define IEEE80211_NDP_2M_PREQ_CSSID 0x0000000FFFFFFFF0
+#define IEEE80211_NDP_2M_PREQ_CSSID_S 4
+#define IEEE80211_NDP_2M_PREQ_RTYPE 0x0000001000000000
+#define IEEE80211_NDP_2M_PREQ_RTYPE_S 36
+
+#define IEEE80211_ANO_NETTYPE_WILD 15
/* control extension - for IEEE80211_FTYPE_CTL | IEEE80211_STYPE_CTL_EXT */
#define IEEE80211_CTL_EXT_POLL 0x2000
@@ -121,6 +166,21 @@
#define IEEE80211_MAX_SN IEEE80211_SN_MASK
#define IEEE80211_SN_MODULO (IEEE80211_MAX_SN + 1)
+
+/* PV1 Layout 11ah 9.8.3.1 */
+#define IEEE80211_PV1_FCTL_VERS 0x0003
+#define IEEE80211_PV1_FCTL_FTYPE 0x001c
+#define IEEE80211_PV1_FCTL_STYPE 0x00e0
+#define IEEE80211_PV1_FCTL_TODS 0x0100
+#define IEEE80211_PV1_FCTL_MOREFRAGS 0x0200
+#define IEEE80211_PV1_FCTL_PM 0x0400
+#define IEEE80211_PV1_FCTL_MOREDATA 0x0800
+#define IEEE80211_PV1_FCTL_PROTECTED 0x1000
+#define IEEE80211_PV1_FCTL_END_SP 0x2000
+#define IEEE80211_PV1_FCTL_RELAYED 0x4000
+#define IEEE80211_PV1_FCTL_ACK_POLICY 0x8000
+#define IEEE80211_PV1_FCTL_CTL_EXT 0x0f00
+
static inline bool ieee80211_sn_less(u16 sn1, u16 sn2)
{
return ((sn1 - sn2) & IEEE80211_SN_MASK) > (IEEE80211_SN_MODULO >> 1);
@@ -148,6 +208,7 @@ static inline u16 ieee80211_sn_sub(u16 sn1, u16 sn2)
#define IEEE80211_MAX_FRAG_THRESHOLD 2352
#define IEEE80211_MAX_RTS_THRESHOLD 2353
#define IEEE80211_MAX_AID 2007
+#define IEEE80211_MAX_AID_S1G 8191
#define IEEE80211_MAX_TIM_LEN 251
#define IEEE80211_MAX_MESH_PEERINGS 63
/* Maximum size for the MA-UNITDATA primitive, 802.11 standard section
@@ -371,6 +432,17 @@ static inline bool ieee80211_is_data(__le16 fc)
cpu_to_le16(IEEE80211_FTYPE_DATA);
}
+/**
+ * ieee80211_is_ext - check if type is IEEE80211_FTYPE_EXT
+ * @fc: frame control bytes in little-endian byteorder
+ */
+static inline bool ieee80211_is_ext(__le16 fc)
+{
+ return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE)) ==
+ cpu_to_le16(IEEE80211_FTYPE_EXT);
+}
+
+
/**
* ieee80211_is_data_qos - check if type is IEEE80211_FTYPE_DATA and IEEE80211_STYPE_QOS_DATA is set
* @fc: frame control bytes in little-endian byteorder
@@ -469,6 +541,18 @@ static inline bool ieee80211_is_beacon(__le16 fc)
cpu_to_le16(IEEE80211_FTYPE_MGMT | IEEE80211_STYPE_BEACON);
}
+/**
+ * ieee80211_is_s1g_beacon - check if IEEE80211_FTYPE_EXT &&
+ * IEEE80211_STYPE_S1G_BEACON
+ * @fc: frame control bytes in little-endian byteorder
+ */
+static inline bool ieee80211_is_s1g_beacon(__le16 fc)
+{
+ return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE |
+ IEEE80211_FCTL_STYPE)) ==
+ cpu_to_le16(IEEE80211_FTYPE_EXT | IEEE80211_STYPE_S1G_BEACON);
+}
+
/**
* ieee80211_is_atim - check if IEEE80211_FTYPE_MGMT && IEEE80211_STYPE_ATIM
* @fc: frame control bytes in little-endian byteorder
@@ -900,6 +984,59 @@ struct ieee80211_addba_ext_ie {
u8 data;
} __packed;
+/**
+ * struct ieee80211_s1g_bcn_compat_ie
+ *
+ * S1G Beacon Compatibility element
+ */
+struct ieee80211_s1g_bcn_compat_ie {
+ __le16 compat_info;
+ __le16 beacon_int;
+ __le32 tsf_completion;
+} __packed;
+
+/**
+ * struct ieee80211_s1g_oper_ie
+ *
+ * S1G Operation element
+ */
+struct ieee80211_s1g_oper_ie {
+ u8 ch_width;
+ u8 oper_class;
+ u8 primary_ch;
+ u8 oper_ch;
+ __le16 basic_mcs_nss;
+} __packed;
+
+/**
+ * struct ieee80211_aid_response_ie
+ *
+ * AID Response element
+ */
+struct ieee80211_aid_response_ie {
+ __le16 aid;
+ u8 switch_count;
+ __le16 response_int;
+} __packed;
+
+struct ieee80211_s1g_cap {
+ u8 capab_info[10];
+ u8 supp_mcs_nss[5];
+} __packed;
+
+struct ieee80211_ext {
+ __le16 frame_control;
+ __le16 duration;
+ union {
+ struct {
+ u8 sa[ETH_ALEN];
+ __le32 timestamp;
+ u8 change_seq;
+ u8 variable[0];
+ } __packed s1g_beacon;
+ } u;
+} __packed __aligned(2);
+
struct ieee80211_mgmt {
__le16 frame_control;
__le16 duration;
@@ -2137,6 +2274,86 @@ ieee80211_he_spr_size(const u8 *he_spr_ie)
return spr_len;
}
+/* S1G Capabilities Information field */
+#define S1G_CAPAB_B0_S1G_LONG BIT(0)
+#define S1G_CAPAB_B0_SGI_1MHZ BIT(1)
+#define S1G_CAPAB_B0_SGI_2MHZ BIT(2)
+#define S1G_CAPAB_B0_SGI_4MHZ BIT(3)
+#define S1G_CAPAB_B0_SGI_8MHZ BIT(4)
+#define S1G_CAPAB_B0_SGI_16MHZ BIT(5)
+#define S1G_CAPAB_B0_SUPP_CH_WIDTH_MASK (BIT(6) | BIT(7))
+#define S1G_CAPAB_B0_SUPP_CH_WIDTH_SHIFT 6
+
+#define S1G_CAPAB_B1_RX_LDPC BIT(0)
+#define S1G_CAPAB_B1_TX_STBC BIT(1)
+#define S1G_CAPAB_B1_RX_STBC BIT(2)
+#define S1G_CAPAB_B1_SU_BFER BIT(3)
+#define S1G_CAPAB_B1_SU_BFEE BIT(4)
+#define S1G_CAPAB_B1_BFEE_STS_MASK (BIT(5) | BIT(6) | BIT(7))
+#define S1G_CAPAB_B1_BFEE_STS_SHIFT 5
+
+#define S1G_CAPAB_B2_SOUNDING_DIMENSIONS_MASK (BIT(0) | BIT(1) | BIT(2))
+#define S1G_CAPAB_B2_SOUNDING_DIMENSIONS_SHIFT 0
+#define S1G_CAPAB_B2_MU_BFER BIT(3)
+#define S1G_CAPAB_B2_MU_BFEE BIT(4)
+#define S1G_CAPAB_B2_PLUS_HTC_VHT BIT(5)
+#define S1G_CAPAB_B2_TRAVELING_PILOT_MASK (BIT(6) | BIT(7))
+#define S1G_CAPAB_B2_TRAVELING_PILOT_SHIFT 6
+
+#define S1G_CAPAB_B3_RD_RESPONDER BIT(0)
+#define S1G_CAPAB_B3_HT_DELAYED_BA BIT(1)
+#define S1G_CAPAB_B3_MAX_MPDU_LEN BIT(2)
+#define S1G_CAPAB_B3_MAX_AMPDU_LEN_EXP_MASK (BIT(3) | BIT(4))
+#define S1G_CAPAB_B3_MAX_AMPDU_LEN_EXP_SHIFT 3
+#define S1G_CAPAB_B3_MIN_MPDU_START_MASK (BIT(5) | BIT(6) | BIT(7))
+#define S1G_CAPAB_B3_MIN_MPDU_START_SHIFT 5
+
+#define S1G_CAPAB_B4_UPLINK_SYNC BIT(0)
+#define S1G_CAPAB_B4_DYNAMIC_AID BIT(1)
+#define S1G_CAPAB_B4_BAT BIT(2)
+#define S1G_CAPAB_B4_TIME_ADE BIT(3)
+#define S1G_CAPAB_B4_NON_TIM BIT(4)
+#define S1G_CAPAB_B4_GROUP_AID BIT(5)
+#define S1G_CAPAB_B4_STA_TYPE_MASK (BIT(6) | BIT(7))
+#define S1G_CAPAB_B4_STA_TYPE_SHIFT 6
+
+#define S1G_CAPAB_B5_CENT_AUTH_CONTROL BIT(0)
+#define S1G_CAPAB_B5_DIST_AUTH_CONTROL BIT(1)
+#define S1G_CAPAB_B5_AMSDU BIT(2)
+#define S1G_CAPAB_B5_AMPDU BIT(3)
+#define S1G_CAPAB_B5_ASYMMETRIC_BA BIT(4)
+#define S1G_CAPAB_B5_FLOW_CONTROL BIT(5)
+#define S1G_CAPAB_B5_SECTORIZED_BEAM_MASK (BIT(6) | BIT(7))
+#define S1G_CAPAB_B5_SECTORIZED_BEAM_SHIFT 6
+
+#define S1G_CAPAB_B6_OBSS_MITIGATION BIT(0)
+#define S1G_CAPAB_B6_FRAGMENT_BA BIT(1)
+#define S1G_CAPAB_B6_NDP_PS_POLL BIT(2)
+#define S1G_CAPAB_B6_RAW_OPERATION BIT(3)
+#define S1G_CAPAB_B6_PAGE_SLICING BIT(4)
+#define S1G_CAPAB_B6_TXOP_SHARING_IMP_ACK BIT(5)
+#define S1G_CAPAB_B6_VHT_LINK_ADAPT_MASK (BIT(6) | BIT(7))
+#define S1G_CAPAB_B6_VHT_LINK_ADAPT_SHIFT 6
+
+#define S1G_CAPAB_B7_TACK_AS_PS_POLL BIT(0)
+#define S1G_CAPAB_B7_DUP_1MHZ BIT(1)
+#define S1G_CAPAB_B7_MCS_NEGOTIATION BIT(2)
+#define S1G_CAPAB_B7_1MHZ_CTL_RESPONSE_PREAMBLE BIT(3)
+#define S1G_CAPAB_B7_NDP_BFING_REPORT_POLL BIT(4)
+#define S1G_CAPAB_B7_UNSOLICITED_DYN_AID BIT(5)
+#define S1G_CAPAB_B7_SECTOR_TRAINING_OPERATION BIT(6)
+#define S1G_CAPAB_B7_TEMP_PS_MODE_SWITCH BIT(7)
+
+#define S1G_CAPAB_B8_TWT_GROUPING BIT(0)
+#define S1G_CAPAB_B8_BDT BIT(1)
+#define S1G_CAPAB_B8_COLOR_MASK (BIT(2) | BIT(3) | BIT(4))
+#define S1G_CAPAB_B8_COLOR_SHIFT 2
+#define S1G_CAPAB_B8_TWT_REQUEST BIT(5)
+#define S1G_CAPAB_B8_TWT_RESPOND BIT(6)
+#define S1G_CAPAB_B8_PV1_FRAME BIT(7)
+
+#define S1G_CAPAB_B9_LINK_ADAPT_PER_CONTROL_RESPONSE BIT(0)
+
/* Authentication algorithms */
#define WLAN_AUTH_OPEN 0
#define WLAN_AUTH_SHARED_KEY 1
@@ -2532,8 +2749,12 @@ enum ieee80211_eid {
WLAN_EID_QUIET_CHANNEL = 198,
WLAN_EID_OPMODE_NOTIF = 199,
+ WLAN_EID_S1G_BCN_COMPAT = 213,
+ WLAN_EID_S1G_SHORT_BCN_INTERVAL = 214,
+ WLAN_EID_S1G_CAPABILITIES = 217,
WLAN_EID_VENDOR_SPECIFIC = 221,
WLAN_EID_QOS_PARAMETER = 222,
+ WLAN_EID_S1G_OPERATION = 232,
WLAN_EID_CAG_NUMBER = 237,
WLAN_EID_AP_CSN = 239,
WLAN_EID_FILS_INDICATION = 240,
--
2.20.1
Drivers may wish to report the RX frequency in units of
KHz. Provide cfg80211_rx_mgmt_khz() and wrap it with
cfg80211_rx_mgmt() so exisiting drivers which can't report
KHz anyway don't need to change. Add a similar wrapper for
cfg80211_report_obss_beacon() so the frequency units stay
somewhat consistent.
This doesn't actually change the nl80211 API yet.
Signed-off-by: Thomas Pedersen <[email protected]>
---
v3:
wrap functions with _khz() (Johannes)
update trace entries with PR_KHZ()
v4:
drop float from PR_KHZ (Johannes)
---
include/linux/ieee80211.h | 2 ++
include/net/cfg80211.h | 54 +++++++++++++++++++++++++++++++++++----
net/mac80211/rx.c | 8 +++---
net/wireless/mlme.c | 8 +++---
net/wireless/nl80211.c | 14 +++++-----
net/wireless/trace.h | 12 ++++-----
6 files changed, 73 insertions(+), 25 deletions(-)
diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h
index a561db435a4b..41d5f000c0d9 100644
--- a/include/linux/ieee80211.h
+++ b/include/linux/ieee80211.h
@@ -3333,6 +3333,8 @@ static inline int ieee80211_get_tdls_action(struct sk_buff *skb, u32 hdr_size)
/* convert frequencies */
#define MHZ_TO_KHZ(freq) ((freq) * 1000)
#define KHZ_TO_MHZ(freq) ((freq) / 1000)
+#define PR_KHZ(f) KHZ_TO_MHZ(f), f % 1000
+#define KHZ_F "%d.%03d"
/* convert powers */
#define DBI_TO_MBI(gain) ((gain) * 100)
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index a82fc59a1d82..3746b52c954e 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -6986,6 +6986,26 @@ void cfg80211_conn_failed(struct net_device *dev, const u8 *mac_addr,
enum nl80211_connect_failed_reason reason,
gfp_t gfp);
+/**
+ * cfg80211_rx_mgmt_khz - notification of received, unprocessed management frame
+ * @wdev: wireless device receiving the frame
+ * @freq: Frequency on which the frame was received in KHz
+ * @sig_dbm: signal strength in dBm, or 0 if unknown
+ * @buf: Management frame (header + body)
+ * @len: length of the frame data
+ * @flags: flags, as defined in enum nl80211_rxmgmt_flags
+ *
+ * This function is called whenever an Action frame is received for a station
+ * mode interface, but is not processed in kernel.
+ *
+ * Return: %true if a user space application has registered for this frame.
+ * For action frames, that makes it responsible for rejecting unrecognized
+ * action frames; %false otherwise, in which case for action frames the
+ * driver is responsible for rejecting the frame.
+ */
+bool cfg80211_rx_mgmt_khz(struct wireless_dev *wdev, int freq, int sig_dbm,
+ const u8 *buf, size_t len, u32 flags);
+
/**
* cfg80211_rx_mgmt - notification of received, unprocessed management frame
* @wdev: wireless device receiving the frame
@@ -7003,8 +7023,13 @@ void cfg80211_conn_failed(struct net_device *dev, const u8 *mac_addr,
* action frames; %false otherwise, in which case for action frames the
* driver is responsible for rejecting the frame.
*/
-bool cfg80211_rx_mgmt(struct wireless_dev *wdev, int freq, int sig_dbm,
- const u8 *buf, size_t len, u32 flags);
+static inline bool cfg80211_rx_mgmt(struct wireless_dev *wdev, int freq,
+ int sig_dbm, const u8 *buf, size_t len,
+ u32 flags)
+{
+ return cfg80211_rx_mgmt_khz(wdev, MHZ_TO_KHZ(freq), sig_dbm, buf, len,
+ flags);
+}
/**
* cfg80211_mgmt_tx_status - notification of TX status for management frame
@@ -7202,6 +7227,21 @@ void cfg80211_probe_status(struct net_device *dev, const u8 *addr,
u64 cookie, bool acked, s32 ack_signal,
bool is_valid_ack_signal, gfp_t gfp);
+/**
+ * cfg80211_report_obss_beacon_khz - report beacon from other APs
+ * @wiphy: The wiphy that received the beacon
+ * @frame: the frame
+ * @len: length of the frame
+ * @freq: frequency the frame was received on in KHz
+ * @sig_dbm: signal strength in dBm, or 0 if unknown
+ *
+ * Use this function to report to userspace when a beacon was
+ * received. It is not useful to call this when there is no
+ * netdev that is in AP/GO mode.
+ */
+void cfg80211_report_obss_beacon_khz(struct wiphy *wiphy, const u8 *frame,
+ size_t len, int freq, int sig_dbm);
+
/**
* cfg80211_report_obss_beacon - report beacon from other APs
* @wiphy: The wiphy that received the beacon
@@ -7214,9 +7254,13 @@ void cfg80211_probe_status(struct net_device *dev, const u8 *addr,
* received. It is not useful to call this when there is no
* netdev that is in AP/GO mode.
*/
-void cfg80211_report_obss_beacon(struct wiphy *wiphy,
- const u8 *frame, size_t len,
- int freq, int sig_dbm);
+static inline void cfg80211_report_obss_beacon(struct wiphy *wiphy,
+ const u8 *frame, size_t len,
+ int freq, int sig_dbm)
+{
+ cfg80211_report_obss_beacon_khz(wiphy, frame, len, MHZ_TO_KHZ(freq),
+ sig_dbm);
+}
/**
* cfg80211_reg_can_beacon - check if beaconing is allowed
diff --git a/net/mac80211/rx.c b/net/mac80211/rx.c
index eaf8931e4627..007eca52afe6 100644
--- a/net/mac80211/rx.c
+++ b/net/mac80211/rx.c
@@ -3097,7 +3097,8 @@ ieee80211_rx_h_mgmt_check(struct ieee80211_rx_data *rx)
cfg80211_report_obss_beacon(rx->local->hw.wiphy,
rx->skb->data, rx->skb->len,
- status->freq, sig);
+ ieee80211_rx_status_to_khz(status),
+ sig);
rx->flags |= IEEE80211_RX_BEACON_REPORTED;
}
@@ -3443,8 +3444,9 @@ ieee80211_rx_h_userspace_mgmt(struct ieee80211_rx_data *rx)
!(status->flag & RX_FLAG_NO_SIGNAL_VAL))
sig = status->signal;
- if (cfg80211_rx_mgmt(&rx->sdata->wdev, status->freq, sig,
- rx->skb->data, rx->skb->len, 0)) {
+ if (cfg80211_rx_mgmt_khz(&rx->sdata->wdev,
+ ieee80211_rx_status_to_khz(status), sig,
+ rx->skb->data, rx->skb->len, 0)) {
if (rx->sta)
rx->sta->rx_stats.packets++;
dev_kfree_skb(rx->skb);
diff --git a/net/wireless/mlme.c b/net/wireless/mlme.c
index 409497a3527d..ca51fbf89b80 100644
--- a/net/wireless/mlme.c
+++ b/net/wireless/mlme.c
@@ -729,8 +729,8 @@ int cfg80211_mlme_mgmt_tx(struct cfg80211_registered_device *rdev,
return rdev_mgmt_tx(rdev, wdev, params, cookie);
}
-bool cfg80211_rx_mgmt(struct wireless_dev *wdev, int freq, int sig_dbm,
- const u8 *buf, size_t len, u32 flags)
+bool cfg80211_rx_mgmt_khz(struct wireless_dev *wdev, int freq, int sig_dbm,
+ const u8 *buf, size_t len, u32 flags)
{
struct wiphy *wiphy = wdev->wiphy;
struct cfg80211_registered_device *rdev = wiphy_to_rdev(wiphy);
@@ -745,7 +745,7 @@ bool cfg80211_rx_mgmt(struct wireless_dev *wdev, int freq, int sig_dbm,
cpu_to_le16(IEEE80211_FCTL_FTYPE | IEEE80211_FCTL_STYPE);
u16 stype;
- trace_cfg80211_rx_mgmt(wdev, freq, sig_dbm);
+ trace_cfg80211_rx_mgmt_khz(wdev, freq, sig_dbm);
stype = (le16_to_cpu(mgmt->frame_control) & IEEE80211_FCTL_STYPE) >> 4;
if (!(stypes->rx & BIT(stype))) {
@@ -785,7 +785,7 @@ bool cfg80211_rx_mgmt(struct wireless_dev *wdev, int freq, int sig_dbm,
trace_cfg80211_return_bool(result);
return result;
}
-EXPORT_SYMBOL(cfg80211_rx_mgmt);
+EXPORT_SYMBOL(cfg80211_rx_mgmt_khz);
void cfg80211_sched_dfs_chan_update(struct cfg80211_registered_device *rdev)
{
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index 3d27b24c68b2..755701132d71 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -16256,7 +16256,7 @@ int nl80211_send_mgmt(struct cfg80211_registered_device *rdev,
netdev->ifindex)) ||
nla_put_u64_64bit(msg, NL80211_ATTR_WDEV, wdev_id(wdev),
NL80211_ATTR_PAD) ||
- nla_put_u32(msg, NL80211_ATTR_WIPHY_FREQ, freq) ||
+ nla_put_u32(msg, NL80211_ATTR_WIPHY_FREQ, KHZ_TO_MHZ(freq)) ||
(sig_dbm &&
nla_put_u32(msg, NL80211_ATTR_RX_SIGNAL_DBM, sig_dbm)) ||
nla_put(msg, NL80211_ATTR_FRAME, len, buf) ||
@@ -16882,16 +16882,15 @@ void cfg80211_probe_status(struct net_device *dev, const u8 *addr,
}
EXPORT_SYMBOL(cfg80211_probe_status);
-void cfg80211_report_obss_beacon(struct wiphy *wiphy,
- const u8 *frame, size_t len,
- int freq, int sig_dbm)
+void cfg80211_report_obss_beacon_khz(struct wiphy *wiphy, const u8 *frame,
+ size_t len, int freq, int sig_dbm)
{
struct cfg80211_registered_device *rdev = wiphy_to_rdev(wiphy);
struct sk_buff *msg;
void *hdr;
struct cfg80211_beacon_registration *reg;
- trace_cfg80211_report_obss_beacon(wiphy, frame, len, freq, sig_dbm);
+ trace_cfg80211_report_obss_beacon_khz(wiphy, frame, len, freq, sig_dbm);
spin_lock_bh(&rdev->beacon_registrations_lock);
list_for_each_entry(reg, &rdev->beacon_registrations, list) {
@@ -16907,7 +16906,8 @@ void cfg80211_report_obss_beacon(struct wiphy *wiphy,
if (nla_put_u32(msg, NL80211_ATTR_WIPHY, rdev->wiphy_idx) ||
(freq &&
- nla_put_u32(msg, NL80211_ATTR_WIPHY_FREQ, freq)) ||
+ nla_put_u32(msg, NL80211_ATTR_WIPHY_FREQ,
+ KHZ_TO_MHZ(freq))) ||
(sig_dbm &&
nla_put_u32(msg, NL80211_ATTR_RX_SIGNAL_DBM, sig_dbm)) ||
nla_put(msg, NL80211_ATTR_FRAME, len, frame))
@@ -16924,7 +16924,7 @@ void cfg80211_report_obss_beacon(struct wiphy *wiphy,
spin_unlock_bh(&rdev->beacon_registrations_lock);
nlmsg_free(msg);
}
-EXPORT_SYMBOL(cfg80211_report_obss_beacon);
+EXPORT_SYMBOL(cfg80211_report_obss_beacon_khz);
#ifdef CONFIG_PM
static int cfg80211_net_detect_results(struct sk_buff *msg,
diff --git a/net/wireless/trace.h b/net/wireless/trace.h
index 53c887ea67c7..8be8b9ce2a48 100644
--- a/net/wireless/trace.h
+++ b/net/wireless/trace.h
@@ -2827,7 +2827,7 @@ DEFINE_EVENT(cfg80211_netdev_mac_evt, cfg80211_del_sta,
TP_ARGS(netdev, macaddr)
);
-TRACE_EVENT(cfg80211_rx_mgmt,
+TRACE_EVENT(cfg80211_rx_mgmt_khz,
TP_PROTO(struct wireless_dev *wdev, int freq, int sig_dbm),
TP_ARGS(wdev, freq, sig_dbm),
TP_STRUCT__entry(
@@ -2840,8 +2840,8 @@ TRACE_EVENT(cfg80211_rx_mgmt,
__entry->freq = freq;
__entry->sig_dbm = sig_dbm;
),
- TP_printk(WDEV_PR_FMT ", freq: %d, sig dbm: %d",
- WDEV_PR_ARG, __entry->freq, __entry->sig_dbm)
+ TP_printk(WDEV_PR_FMT ", freq: "KHZ_F", sig dbm: %d",
+ WDEV_PR_ARG, PR_KHZ(__entry->freq), __entry->sig_dbm)
);
TRACE_EVENT(cfg80211_mgmt_tx_status,
@@ -3107,7 +3107,7 @@ TRACE_EVENT(cfg80211_pmksa_candidate_notify,
BOOL_TO_STR(__entry->preauth))
);
-TRACE_EVENT(cfg80211_report_obss_beacon,
+TRACE_EVENT(cfg80211_report_obss_beacon_khz,
TP_PROTO(struct wiphy *wiphy, const u8 *frame, size_t len,
int freq, int sig_dbm),
TP_ARGS(wiphy, frame, len, freq, sig_dbm),
@@ -3121,8 +3121,8 @@ TRACE_EVENT(cfg80211_report_obss_beacon,
__entry->freq = freq;
__entry->sig_dbm = sig_dbm;
),
- TP_printk(WIPHY_PR_FMT ", freq: %d, sig_dbm: %d",
- WIPHY_PR_ARG, __entry->freq, __entry->sig_dbm)
+ TP_printk(WIPHY_PR_FMT ", freq: "KHZ_F", sig_dbm: %d",
+ WIPHY_PR_ARG, PR_KHZ(__entry->freq), __entry->sig_dbm)
);
TRACE_EVENT(cfg80211_tdls_oper_request,
--
2.20.1
cfg80211 recently gained the ability to understand a
frequency offset component in KHz. Expose this in nl80211
through the new attributes NL80211_ATTR_WIPHY_FREQ_OFFSET,
NL80211_FREQUENCY_ATTR_OFFSET,
NL80211_ATTR_CENTER_FREQ1_OFFSET, and
NL80211_BSS_FREQUENCY_OFFSET.
These add support to send and receive a KHz offset
component with the following NL80211 commands:
- NL80211_CMD_FRAME
- NL80211_CMD_GET_SCAN
- NL80211_CMD_AUTHENTICATE
- NL80211_CMD_ASSOCIATE
- NL80211_CMD_CONNECT
Along with any other command which takes a chandef, ie:
- NL80211_CMD_SET_CHANNEL
- NL80211_CMD_SET_WIPHY
- NL80211_CMD_START_AP
- NL80211_CMD_RADAR_DETECT
- NL80211_CMD_NOTIFY_RADAR
- NL80211_CMD_CHANNEL_SWITCH
- NL80211_JOIN_IBSS
- NL80211_CMD_REMAIN_ON_CHANNEL
- NL80211_CMD_JOIN_OCB
- NL80211_CMD_JOIN_MESH
- NL80211_CMD_TDLS_CHANNEL_SWITCH
If the driver advertises a band containing channels with
frequency offset, it must also verify support for
frequency offset channels in its cfg80211 ops, or return
an error.
Signed-off-by: Thomas Pedersen <[email protected]>
---
v2:
use NLA_POLICY_RANGE for the freq offsets (Johannes)
v4:
handle case when center_freq1 is not supplied with an
offset, but primary frequency had one.
---
include/uapi/linux/nl80211.h | 50 +++++++++++++++--------
net/wireless/nl80211.c | 78 +++++++++++++++++++++++++++---------
2 files changed, 91 insertions(+), 37 deletions(-)
diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h
index 9679d561f7d0..0ceb4de52d9a 100644
--- a/include/uapi/linux/nl80211.h
+++ b/include/uapi/linux/nl80211.h
@@ -296,13 +296,14 @@
* to get a list of all present wiphys.
* @NL80211_CMD_SET_WIPHY: set wiphy parameters, needs %NL80211_ATTR_WIPHY or
* %NL80211_ATTR_IFINDEX; can be used to set %NL80211_ATTR_WIPHY_NAME,
- * %NL80211_ATTR_WIPHY_TXQ_PARAMS, %NL80211_ATTR_WIPHY_FREQ (and the
- * attributes determining the channel width; this is used for setting
- * monitor mode channel), %NL80211_ATTR_WIPHY_RETRY_SHORT,
- * %NL80211_ATTR_WIPHY_RETRY_LONG, %NL80211_ATTR_WIPHY_FRAG_THRESHOLD,
- * and/or %NL80211_ATTR_WIPHY_RTS_THRESHOLD.
- * However, for setting the channel, see %NL80211_CMD_SET_CHANNEL
- * instead, the support here is for backward compatibility only.
+ * %NL80211_ATTR_WIPHY_TXQ_PARAMS, %NL80211_ATTR_WIPHY_FREQ,
+ * %NL80211_ATTR_WIPHY_FREQ_OFFSET (and the attributes determining the
+ * channel width; this is used for setting monitor mode channel),
+ * %NL80211_ATTR_WIPHY_RETRY_SHORT, %NL80211_ATTR_WIPHY_RETRY_LONG,
+ * %NL80211_ATTR_WIPHY_FRAG_THRESHOLD, and/or
+ * %NL80211_ATTR_WIPHY_RTS_THRESHOLD. However, for setting the channel,
+ * see %NL80211_CMD_SET_CHANNEL instead, the support here is for backward
+ * compatibility only.
* @NL80211_CMD_NEW_WIPHY: Newly created wiphy, response to get request
* or rename notification. Has attributes %NL80211_ATTR_WIPHY and
* %NL80211_ATTR_WIPHY_NAME.
@@ -351,7 +352,8 @@
* %NL80211_ATTR_AUTH_TYPE, %NL80211_ATTR_INACTIVITY_TIMEOUT,
* %NL80211_ATTR_ACL_POLICY and %NL80211_ATTR_MAC_ADDRS.
* The channel to use can be set on the interface or be given using the
- * %NL80211_ATTR_WIPHY_FREQ and the attributes determining channel width.
+ * %NL80211_ATTR_WIPHY_FREQ and %NL80211_ATTR_WIPHY_FREQ_OFFSET, and the
+ * attributes determining channel width.
* @NL80211_CMD_NEW_BEACON: old alias for %NL80211_CMD_START_AP
* @NL80211_CMD_STOP_AP: Stop AP operation on the given interface
* @NL80211_CMD_DEL_BEACON: old alias for %NL80211_CMD_STOP_AP
@@ -536,11 +538,12 @@
* interface. %NL80211_ATTR_MAC is used to specify PeerSTAAddress (and
* BSSID in case of station mode). %NL80211_ATTR_SSID is used to specify
* the SSID (mainly for association, but is included in authentication
- * request, too, to help BSS selection. %NL80211_ATTR_WIPHY_FREQ is used
- * to specify the frequence of the channel in MHz. %NL80211_ATTR_AUTH_TYPE
- * is used to specify the authentication type. %NL80211_ATTR_IE is used to
- * define IEs (VendorSpecificInfo, but also including RSN IE and FT IEs)
- * to be added to the frame.
+ * request, too, to help BSS selection. %NL80211_ATTR_WIPHY_FREQ +
+ * %NL80211_ATTR_WIPHY_FREQ_OFFSET is used to specify the frequence of the
+ * channel in MHz. %NL80211_ATTR_AUTH_TYPE is used to specify the
+ * authentication type. %NL80211_ATTR_IE is used to define IEs
+ * (VendorSpecificInfo, but also including RSN IE and FT IEs) to be added
+ * to the frame.
* When used as an event, this reports reception of an Authentication
* frame in station and IBSS modes when the local MLME processed the
* frame, i.e., it was for the local STA and was received in correct
@@ -595,8 +598,9 @@
* requests to connect to a specified network but without separating
* auth and assoc steps. For this, you need to specify the SSID in a
* %NL80211_ATTR_SSID attribute, and can optionally specify the association
- * IEs in %NL80211_ATTR_IE, %NL80211_ATTR_AUTH_TYPE, %NL80211_ATTR_USE_MFP,
- * %NL80211_ATTR_MAC, %NL80211_ATTR_WIPHY_FREQ, %NL80211_ATTR_CONTROL_PORT,
+ * IEs in %NL80211_ATTR_IE, %NL80211_ATTR_AUTH_TYPE,
+ * %NL80211_ATTR_USE_MFP, %NL80211_ATTR_MAC, %NL80211_ATTR_WIPHY_FREQ,
+ * %NL80211_ATTR_WIPHY_FREQ_OFFSET, %NL80211_ATTR_CONTROL_PORT,
* %NL80211_ATTR_CONTROL_PORT_ETHERTYPE,
* %NL80211_ATTR_CONTROL_PORT_NO_ENCRYPT,
* %NL80211_ATTR_CONTROL_PORT_OVER_NL80211, %NL80211_ATTR_MAC_HINT, and
@@ -1433,7 +1437,8 @@ enum nl80211_commands {
* of &enum nl80211_chan_width, describing the channel width. See the
* documentation of the enum for more information.
* @NL80211_ATTR_CENTER_FREQ1: Center frequency of the first part of the
- * channel, used for anything but 20 MHz bandwidth
+ * channel, used for anything but 20 MHz bandwidth. In S1G this is the
+ * operating channel center frequency.
* @NL80211_ATTR_CENTER_FREQ2: Center frequency of the second part of the
* channel, used only for 80+80 MHz bandwidth
* @NL80211_ATTR_WIPHY_CHANNEL_TYPE: included with NL80211_ATTR_WIPHY_FREQ
@@ -2480,9 +2485,14 @@ enum nl80211_commands {
* entry without having to force a disconnection after the PMK timeout. If
* no roaming occurs between the reauth threshold and PMK expiration,
* disassociation is still forced.
- *
* @NL80211_ATTR_RECEIVE_MULTICAST: multicast flag for the
* %NL80211_CMD_REGISTER_FRAME command, see the description there.
+ * @NL80211_ATTR_WIPHY_FREQ_OFFSET: offset of the associated
+ * %NL80211_ATTR_WIPHY_FREQ in positive KHz. Only valid when supplied with
+ * an %NL80211_ATTR_WIPHY_FREQ_OFFSET.
+ * @NL80211_ATTR_CENTER_FREQ1_OFFSET: Center frequency offset in KHz for the
+ * first channel segment specified in %NL80211_ATTR_CENTER_FREQ1.
+ *
*
* @NUM_NL80211_ATTR: total number of nl80211_attrs available
* @NL80211_ATTR_MAX: highest attribute number currently defined
@@ -2960,6 +2970,8 @@ enum nl80211_attrs {
NL80211_ATTR_PMK_REAUTH_THRESHOLD,
NL80211_ATTR_RECEIVE_MULTICAST,
+ NL80211_ATTR_WIPHY_FREQ_OFFSET,
+ NL80211_ATTR_CENTER_FREQ1_OFFSET,
/* add attributes here, update the policy in nl80211.c */
@@ -3682,6 +3694,7 @@ enum nl80211_wmm_rule {
* (see &enum nl80211_wmm_rule)
* @NL80211_FREQUENCY_ATTR_NO_HE: HE operation is not allowed on this channel
* in current regulatory domain.
+ * @NL80211_FREQUENCY_ATTR_OFFSET: frequency offset in KHz
* @NL80211_FREQUENCY_ATTR_MAX: highest frequency attribute number
* currently defined
* @__NL80211_FREQUENCY_ATTR_AFTER_LAST: internal use
@@ -3712,6 +3725,7 @@ enum nl80211_frequency_attr {
NL80211_FREQUENCY_ATTR_NO_10MHZ,
NL80211_FREQUENCY_ATTR_WMM,
NL80211_FREQUENCY_ATTR_NO_HE,
+ NL80211_FREQUENCY_ATTR_OFFSET,
/* keep last */
__NL80211_FREQUENCY_ATTR_AFTER_LAST,
@@ -4482,6 +4496,7 @@ enum nl80211_bss_scan_width {
* @NL80211_BSS_CHAIN_SIGNAL: per-chain signal strength of last BSS update.
* Contains a nested array of signal strength attributes (u8, dBm),
* using the nesting index as the antenna number.
+ * @NL80211_BSS_FREQUENCY_OFFSET: frequency offset in KHz
* @__NL80211_BSS_AFTER_LAST: internal
* @NL80211_BSS_MAX: highest BSS attribute
*/
@@ -4506,6 +4521,7 @@ enum nl80211_bss {
NL80211_BSS_PARENT_TSF,
NL80211_BSS_PARENT_BSSID,
NL80211_BSS_CHAIN_SIGNAL,
+ NL80211_BSS_FREQUENCY_OFFSET,
/* keep last */
__NL80211_BSS_AFTER_LAST,
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index 755701132d71..a4ac9b38d0f2 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -365,6 +365,7 @@ const struct nla_policy nl80211_policy[NUM_NL80211_ATTR] = {
[NL80211_ATTR_CHANNEL_WIDTH] = { .type = NLA_U32 },
[NL80211_ATTR_CENTER_FREQ1] = { .type = NLA_U32 },
+ [NL80211_ATTR_CENTER_FREQ1_OFFSET] = NLA_POLICY_RANGE(NLA_U32, 0, 999),
[NL80211_ATTR_CENTER_FREQ2] = { .type = NLA_U32 },
[NL80211_ATTR_WIPHY_RETRY_SHORT] = NLA_POLICY_MIN(NLA_U8, 1),
@@ -662,6 +663,7 @@ const struct nla_policy nl80211_policy[NUM_NL80211_ATTR] = {
[NL80211_ATTR_PMK_LIFETIME] = NLA_POLICY_MIN(NLA_U32, 1),
[NL80211_ATTR_PMK_REAUTH_THRESHOLD] = NLA_POLICY_RANGE(NLA_U8, 1, 100),
[NL80211_ATTR_RECEIVE_MULTICAST] = { .type = NLA_FLAG },
+ [NL80211_ATTR_WIPHY_FREQ_OFFSET] = NLA_POLICY_RANGE(NLA_U32, 0, 999),
};
/* policy for the key attributes */
@@ -946,6 +948,9 @@ static int nl80211_msg_put_channel(struct sk_buff *msg, struct wiphy *wiphy,
chan->center_freq))
goto nla_put_failure;
+ if (nla_put_u32(msg, NL80211_FREQUENCY_ATTR_OFFSET, chan->freq_offset))
+ goto nla_put_failure;
+
if ((chan->flags & IEEE80211_CHAN_DISABLED) &&
nla_put_flag(msg, NL80211_FREQUENCY_ATTR_DISABLED))
goto nla_put_failure;
@@ -1351,13 +1356,11 @@ static int nl80211_key_allowed(struct wireless_dev *wdev)
}
static struct ieee80211_channel *nl80211_get_valid_chan(struct wiphy *wiphy,
- struct nlattr *tb)
+ u32 freq)
{
struct ieee80211_channel *chan;
- if (tb == NULL)
- return NULL;
- chan = ieee80211_get_channel(wiphy, nla_get_u32(tb));
+ chan = ieee80211_get_channel_khz(wiphy, freq);
if (!chan || chan->flags & IEEE80211_CHAN_DISABLED)
return NULL;
return chan;
@@ -2812,13 +2815,17 @@ int nl80211_parse_chandef(struct cfg80211_registered_device *rdev,
if (!attrs[NL80211_ATTR_WIPHY_FREQ])
return -EINVAL;
- control_freq = nla_get_u32(attrs[NL80211_ATTR_WIPHY_FREQ]);
+ control_freq = MHZ_TO_KHZ(
+ nla_get_u32(info->attrs[NL80211_ATTR_WIPHY_FREQ]));
+ if (info->attrs[NL80211_ATTR_WIPHY_FREQ_OFFSET])
+ control_freq +=
+ nla_get_u32(info->attrs[NL80211_ATTR_WIPHY_FREQ_OFFSET]);
memset(chandef, 0, sizeof(*chandef));
-
- chandef->chan = ieee80211_get_channel(&rdev->wiphy, control_freq);
+ chandef->chan = ieee80211_get_channel_khz(&rdev->wiphy, control_freq);
chandef->width = NL80211_CHAN_WIDTH_20_NOHT;
- chandef->center_freq1 = control_freq;
+ chandef->center_freq1 = KHZ_TO_MHZ(control_freq);
+ chandef->freq1_offset = control_freq % 1000;
chandef->center_freq2 = 0;
/* Primary channel not allowed */
@@ -2866,9 +2873,15 @@ int nl80211_parse_chandef(struct cfg80211_registered_device *rdev,
} else if (attrs[NL80211_ATTR_CHANNEL_WIDTH]) {
chandef->width =
nla_get_u32(attrs[NL80211_ATTR_CHANNEL_WIDTH]);
- if (attrs[NL80211_ATTR_CENTER_FREQ1])
+ if (attrs[NL80211_ATTR_CENTER_FREQ1]) {
chandef->center_freq1 =
nla_get_u32(attrs[NL80211_ATTR_CENTER_FREQ1]);
+ if (attrs[NL80211_ATTR_CENTER_FREQ1_OFFSET])
+ chandef->freq1_offset = nla_get_u32(
+ attrs[NL80211_ATTR_CENTER_FREQ1_OFFSET]);
+ else
+ chandef->freq1_offset = 0;
+ }
if (attrs[NL80211_ATTR_CENTER_FREQ2])
chandef->center_freq2 =
nla_get_u32(attrs[NL80211_ATTR_CENTER_FREQ2]);
@@ -3301,6 +3314,9 @@ static int nl80211_send_chandef(struct sk_buff *msg,
if (nla_put_u32(msg, NL80211_ATTR_WIPHY_FREQ,
chandef->chan->center_freq))
return -ENOBUFS;
+ if (nla_put_u32(msg, NL80211_ATTR_WIPHY_FREQ_OFFSET,
+ chandef->chan->freq_offset))
+ return -ENOBUFS;
switch (chandef->width) {
case NL80211_CHAN_WIDTH_20_NOHT:
case NL80211_CHAN_WIDTH_20:
@@ -8918,6 +8934,8 @@ static int nl80211_send_bss(struct sk_buff *msg, struct netlink_callback *cb,
goto nla_put_failure;
if (nla_put_u16(msg, NL80211_BSS_CAPABILITY, res->capability) ||
nla_put_u32(msg, NL80211_BSS_FREQUENCY, res->channel->center_freq) ||
+ nla_put_u32(msg, NL80211_BSS_FREQUENCY_OFFSET,
+ res->channel->freq_offset) ||
nla_put_u32(msg, NL80211_BSS_CHAN_WIDTH, res->scan_width) ||
nla_put_u32(msg, NL80211_BSS_SEEN_MS_AGO,
jiffies_to_msecs(jiffies - intbss->ts)))
@@ -9186,6 +9204,7 @@ static int nl80211_authenticate(struct sk_buff *skb, struct genl_info *info)
enum nl80211_auth_type auth_type;
struct key_parse key;
bool local_state_change;
+ u32 freq;
if (!info->attrs[NL80211_ATTR_MAC])
return -EINVAL;
@@ -9242,8 +9261,12 @@ static int nl80211_authenticate(struct sk_buff *skb, struct genl_info *info)
return -EOPNOTSUPP;
bssid = nla_data(info->attrs[NL80211_ATTR_MAC]);
- chan = nl80211_get_valid_chan(&rdev->wiphy,
- info->attrs[NL80211_ATTR_WIPHY_FREQ]);
+ freq = MHZ_TO_KHZ(nla_get_u32(info->attrs[NL80211_ATTR_WIPHY_FREQ]));
+ if (info->attrs[NL80211_ATTR_WIPHY_FREQ_OFFSET])
+ freq +=
+ nla_get_u32(info->attrs[NL80211_ATTR_WIPHY_FREQ_OFFSET]);
+
+ chan = nl80211_get_valid_chan(&rdev->wiphy, freq);
if (!chan)
return -EINVAL;
@@ -9433,6 +9456,7 @@ static int nl80211_associate(struct sk_buff *skb, struct genl_info *info)
struct cfg80211_assoc_request req = {};
const u8 *bssid, *ssid;
int err, ssid_len = 0;
+ u32 freq;
if (dev->ieee80211_ptr->conn_owner_nlportid &&
dev->ieee80211_ptr->conn_owner_nlportid != info->snd_portid)
@@ -9452,8 +9476,11 @@ static int nl80211_associate(struct sk_buff *skb, struct genl_info *info)
bssid = nla_data(info->attrs[NL80211_ATTR_MAC]);
- chan = nl80211_get_valid_chan(&rdev->wiphy,
- info->attrs[NL80211_ATTR_WIPHY_FREQ]);
+ freq = MHZ_TO_KHZ(nla_get_u32(info->attrs[NL80211_ATTR_WIPHY_FREQ]));
+ if (info->attrs[NL80211_ATTR_WIPHY_FREQ_OFFSET])
+ freq +=
+ nla_get_u32(info->attrs[NL80211_ATTR_WIPHY_FREQ_OFFSET]);
+ chan = nl80211_get_valid_chan(&rdev->wiphy, freq);
if (!chan)
return -EINVAL;
@@ -10133,6 +10160,7 @@ static int nl80211_connect(struct sk_buff *skb, struct genl_info *info)
struct cfg80211_connect_params connect;
struct wiphy *wiphy;
struct cfg80211_cached_keys *connkeys = NULL;
+ u32 freq = 0;
int err;
memset(&connect, 0, sizeof(connect));
@@ -10203,14 +10231,21 @@ static int nl80211_connect(struct sk_buff *skb, struct genl_info *info)
connect.prev_bssid =
nla_data(info->attrs[NL80211_ATTR_PREV_BSSID]);
- if (info->attrs[NL80211_ATTR_WIPHY_FREQ]) {
- connect.channel = nl80211_get_valid_chan(
- wiphy, info->attrs[NL80211_ATTR_WIPHY_FREQ]);
+ if (info->attrs[NL80211_ATTR_WIPHY_FREQ])
+ freq = MHZ_TO_KHZ(nla_get_u32(
+ info->attrs[NL80211_ATTR_WIPHY_FREQ]));
+ if (info->attrs[NL80211_ATTR_WIPHY_FREQ_OFFSET])
+ freq +=
+ nla_get_u32(info->attrs[NL80211_ATTR_WIPHY_FREQ_OFFSET]);
+
+ if (freq) {
+ connect.channel = nl80211_get_valid_chan(wiphy, freq);
if (!connect.channel)
return -EINVAL;
} else if (info->attrs[NL80211_ATTR_WIPHY_FREQ_HINT]) {
- connect.channel_hint = nl80211_get_valid_chan(
- wiphy, info->attrs[NL80211_ATTR_WIPHY_FREQ_HINT]);
+ freq = nla_get_u32(info->attrs[NL80211_ATTR_WIPHY_FREQ_HINT]);
+ freq = MHZ_TO_KHZ(freq);
+ connect.channel_hint = nl80211_get_valid_chan(wiphy, freq);
if (!connect.channel_hint)
return -EINVAL;
}
@@ -16257,6 +16292,7 @@ int nl80211_send_mgmt(struct cfg80211_registered_device *rdev,
nla_put_u64_64bit(msg, NL80211_ATTR_WDEV, wdev_id(wdev),
NL80211_ATTR_PAD) ||
nla_put_u32(msg, NL80211_ATTR_WIPHY_FREQ, KHZ_TO_MHZ(freq)) ||
+ nla_put_u32(msg, NL80211_ATTR_WIPHY_FREQ_OFFSET, freq % 1000) ||
(sig_dbm &&
nla_put_u32(msg, NL80211_ATTR_RX_SIGNAL_DBM, sig_dbm)) ||
nla_put(msg, NL80211_ATTR_FRAME, len, buf) ||
@@ -16906,8 +16942,10 @@ void cfg80211_report_obss_beacon_khz(struct wiphy *wiphy, const u8 *frame,
if (nla_put_u32(msg, NL80211_ATTR_WIPHY, rdev->wiphy_idx) ||
(freq &&
- nla_put_u32(msg, NL80211_ATTR_WIPHY_FREQ,
- KHZ_TO_MHZ(freq))) ||
+ (nla_put_u32(msg, NL80211_ATTR_WIPHY_FREQ,
+ KHZ_TO_MHZ(freq)) ||
+ nla_put_u32(msg, NL80211_ATTR_WIPHY_FREQ_OFFSET,
+ freq % 1000))) ||
(sig_dbm &&
nla_put_u32(msg, NL80211_ATTR_RX_SIGNAL_DBM, sig_dbm)) ||
nla_put(msg, NL80211_ATTR_FRAME, len, frame))
--
2.20.1
Hi Thomas,
This looks mostly good (and I've applied the other 4 patches with some
fixups), but ...
> @@ -911,6 +931,15 @@ bool cfg80211_chandef_usable(struct wiphy *wiphy,
> control_freq = chandef->chan->center_freq;
>
> switch (chandef->width) {
> + case NL80211_CHAN_WIDTH_1:
> + width = 1;
> + break;
> + case NL80211_CHAN_WIDTH_2:
> + width = 2;
> + break;
> + case NL80211_CHAN_WIDTH_4:
> + width = 4;
> + break;
> case NL80211_CHAN_WIDTH_5:
aren't you missing some bandwidths here? You'd fall through to a
WARN_ON(), which doesn't seem good?
johannes
On 5/26/20 6:01 AM, Johannes Berg wrote:
> Hi Thomas,
>
> This looks mostly good (and I've applied the other 4 patches with some
> fixups), but ...
>
>> @@ -911,6 +931,15 @@ bool cfg80211_chandef_usable(struct wiphy *wiphy,
>> control_freq = chandef->chan->center_freq;
>>
>> switch (chandef->width) {
>> + case NL80211_CHAN_WIDTH_1:
>> + width = 1;
>> + break;
>> + case NL80211_CHAN_WIDTH_2:
>> + width = 2;
>> + break;
>> + case NL80211_CHAN_WIDTH_4:
>> + width = 4;
>> + break;
>> case NL80211_CHAN_WIDTH_5:
>
> aren't you missing some bandwidths here? You'd fall through to a
> WARN_ON(), which doesn't seem good?
Yep. Looks like hwsim tests needs a test for larger bandwidths.
--
thomas