To reduce power consumption enable 802.11 power save mode in
station mode. This allows both radio and CPU to sleep more.
Only enable the mode on WCN7850, other chips don't support it
for now.
To test that power save mode is running, run below command and
check there is no NULL Data frame seen by a sniffer:
iw dev <inf> set power_save off
And run below command, then check there is a NULL Data frame
in sniffer:
iw dev <inf> set power_save on
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4
Signed-off-by: Baochen Qiang <[email protected]>
---
drivers/net/wireless/ath/ath12k/core.h | 1 +
drivers/net/wireless/ath/ath12k/hw.c | 8 +++-
drivers/net/wireless/ath/ath12k/hw.h | 4 +-
drivers/net/wireless/ath/ath12k/mac.c | 54 ++++++++++++++++++++++++++
4 files changed, 65 insertions(+), 2 deletions(-)
diff --git a/drivers/net/wireless/ath/ath12k/core.h b/drivers/net/wireless/ath/ath12k/core.h
index 5c6c1e2eddb6..6843ec91780d 100644
--- a/drivers/net/wireless/ath/ath12k/core.h
+++ b/drivers/net/wireless/ath/ath12k/core.h
@@ -264,6 +264,7 @@ struct ath12k_vif {
u8 tx_encap_type;
u8 vdev_stats_id;
u32 punct_bitmap;
+ bool ps;
};
struct ath12k_vif_iter {
diff --git a/drivers/net/wireless/ath/ath12k/hw.c b/drivers/net/wireless/ath/ath12k/hw.c
index cbb6e2b6d826..6070064a25c7 100644
--- a/drivers/net/wireless/ath/ath12k/hw.c
+++ b/drivers/net/wireless/ath/ath12k/hw.c
@@ -1,7 +1,7 @@
// SPDX-License-Identifier: BSD-3-Clause-Clear
/*
* Copyright (c) 2018-2021 The Linux Foundation. All rights reserved.
- * Copyright (c) 2021-2023 Qualcomm Innovation Center, Inc. All rights reserved.
+ * Copyright (c) 2021-2024 Qualcomm Innovation Center, Inc. All rights reserved.
*/
#include <linux/types.h>
@@ -917,6 +917,8 @@ static const struct ath12k_hw_params ath12k_hw_params[] = {
.def_num_link = 0,
.max_mlo_peer = 256,
+
+ .supports_sta_ps = false,
},
{
.name = "wcn7850 hw2.0",
@@ -984,6 +986,8 @@ static const struct ath12k_hw_params ath12k_hw_params[] = {
.def_num_link = 2,
.max_mlo_peer = 32,
+
+ .supports_sta_ps = true,
},
{
.name = "qcn9274 hw2.0",
@@ -1049,6 +1053,8 @@ static const struct ath12k_hw_params ath12k_hw_params[] = {
.def_num_link = 0,
.max_mlo_peer = 256,
+
+ .supports_sta_ps = false,
},
};
diff --git a/drivers/net/wireless/ath/ath12k/hw.h b/drivers/net/wireless/ath/ath12k/hw.h
index 0c3b416ae150..6a85ddbb34e4 100644
--- a/drivers/net/wireless/ath/ath12k/hw.h
+++ b/drivers/net/wireless/ath/ath12k/hw.h
@@ -1,7 +1,7 @@
/* SPDX-License-Identifier: BSD-3-Clause-Clear */
/*
* Copyright (c) 2018-2021 The Linux Foundation. All rights reserved.
- * Copyright (c) 2021-2023 Qualcomm Innovation Center, Inc. All rights reserved.
+ * Copyright (c) 2021-2024 Qualcomm Innovation Center, Inc. All rights reserved.
*/
#ifndef ATH12K_HW_H
@@ -195,6 +195,8 @@ struct ath12k_hw_params {
u8 def_num_link;
u16 max_mlo_peer;
+
+ bool supports_sta_ps;
};
struct ath12k_hw_ops {
diff --git a/drivers/net/wireless/ath/ath12k/mac.c b/drivers/net/wireless/ath/ath12k/mac.c
index a27480a69b27..465480f52903 100644
--- a/drivers/net/wireless/ath/ath12k/mac.c
+++ b/drivers/net/wireless/ath/ath12k/mac.c
@@ -2509,12 +2509,60 @@ static int ath12k_mac_fils_discovery(struct ath12k_vif *arvif,
return ret;
}
+static void ath12k_mac_vif_setup_ps(struct ath12k_vif *arvif)
+{
+ struct ath12k *ar = arvif->ar;
+ struct ieee80211_vif *vif = arvif->vif;
+ struct ieee80211_conf *conf = &ath12k_ar_to_hw(ar)->conf;
+ enum wmi_sta_powersave_param param;
+ enum wmi_sta_ps_mode psmode;
+ int ret;
+ int timeout;
+ bool enable_ps;
+
+ lockdep_assert_held(&ar->conf_mutex);
+
+ if (vif->type != NL80211_IFTYPE_STATION)
+ return;
+
+ enable_ps = arvif->ps;
+ if (enable_ps) {
+ psmode = WMI_STA_PS_MODE_ENABLED;
+ param = WMI_STA_PS_PARAM_INACTIVITY_TIME;
+
+ timeout = conf->dynamic_ps_timeout;
+ if (timeout == 0) {
+ /* firmware doesn't like 0 */
+ timeout = ieee80211_tu_to_usec(vif->bss_conf.beacon_int) / 1000;
+ }
+
+ ret = ath12k_wmi_set_sta_ps_param(ar, arvif->vdev_id, param,
+ timeout);
+ if (ret) {
+ ath12k_warn(ar->ab, "failed to set inactivity time for vdev %d: %i\n",
+ arvif->vdev_id, ret);
+ return;
+ }
+ } else {
+ psmode = WMI_STA_PS_MODE_DISABLED;
+ }
+
+ ath12k_dbg(ar->ab, ATH12K_DBG_MAC, "mac vdev %d psmode %s\n",
+ arvif->vdev_id, psmode ? "enable" : "disable");
+
+ ret = ath12k_wmi_pdev_set_ps_mode(ar, arvif->vdev_id, psmode);
+ if (ret)
+ ath12k_warn(ar->ab, "failed to set sta power save mode %d for vdev %d: %d\n",
+ psmode, arvif->vdev_id, ret);
+}
+
static void ath12k_mac_bss_info_changed(struct ath12k *ar,
struct ath12k_vif *arvif,
struct ieee80211_bss_conf *info,
u64 changed)
{
struct ieee80211_vif *vif = arvif->vif;
+ struct ieee80211_vif_cfg *vif_cfg = &vif->cfg;
struct cfg80211_chan_def def;
u32 param_id, param_value;
enum nl80211_band band;
@@ -2787,6 +2835,12 @@ static void ath12k_mac_bss_info_changed(struct ath12k *ar,
if (changed & BSS_CHANGED_EHT_PUNCTURING)
arvif->punct_bitmap = info->eht_puncturing;
+
+ if (changed & BSS_CHANGED_PS &&
+ ar->ab->hw_params->supports_sta_ps) {
+ arvif->ps = vif_cfg->ps;
+ ath12k_mac_vif_setup_ps(arvif);
+ }
}
static void ath12k_mac_op_bss_info_changed(struct ieee80211_hw *hw,
base-commit: d4d13947306ab3c98c84389d9397563b550b71b8
--
2.25.1
On 1/31/2024 7:58 PM, Baochen Qiang wrote:
> To reduce power consumption enable 802.11 power save mode in
> station mode. This allows both radio and CPU to sleep more.
>
> Only enable the mode on WCN7850, other chips don't support it
> for now.
>
> To test that power save mode is running, run below command and
> check there is no NULL Data frame seen by a sniffer:
> iw dev <inf> set power_save off
>
> And run below command, then check there is a NULL Data frame
> in sniffer:
> iw dev <inf> set power_save on
>
> Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4
>
> Signed-off-by: Baochen Qiang <[email protected]>
Acked-by: Jeff Johnson <[email protected]>
Baochen Qiang <[email protected]> writes:
> To reduce power consumption enable 802.11 power save mode in
> station mode. This allows both radio and CPU to sleep more.
>
> Only enable the mode on WCN7850, other chips don't support it
> for now.
>
> To test that power save mode is running, run below command and
> check there is no NULL Data frame seen by a sniffer:
> iw dev <inf> set power_save off
>
> And run below command, then check there is a NULL Data frame
> in sniffer:
> iw dev <inf> set power_save on
>
> Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4
>
> Signed-off-by: Baochen Qiang <[email protected]>
This had simple conflicts in hw_params, please check:
https://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.git/commit/?h=pending&id=f776fd9ccb6561c4e4fdf05552a8b57a06686a90
--
https://patchwork.kernel.org/project/linux-wireless/list/
https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches
On 2/2/2024 5:51 AM, Kalle Valo wrote:
> Baochen Qiang <[email protected]> writes:
>
>> To reduce power consumption enable 802.11 power save mode in
>> station mode. This allows both radio and CPU to sleep more.
>>
>> Only enable the mode on WCN7850, other chips don't support it
>> for now.
>>
>> To test that power save mode is running, run below command and
>> check there is no NULL Data frame seen by a sniffer:
>> iw dev <inf> set power_save off
>>
>> And run below command, then check there is a NULL Data frame
>> in sniffer:
>> iw dev <inf> set power_save on
>>
>> Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4
>>
>> Signed-off-by: Baochen Qiang <[email protected]>
>
> This had simple conflicts in hw_params, please check:
>
> https://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.git/commit/?h=pending&id=f776fd9ccb6561c4e4fdf05552a8b57a06686a90
>
LGTM
On 2/2/2024 9:51 PM, Kalle Valo wrote:
> Baochen Qiang <[email protected]> writes:
>
>> To reduce power consumption enable 802.11 power save mode in
>> station mode. This allows both radio and CPU to sleep more.
>>
>> Only enable the mode on WCN7850, other chips don't support it
>> for now.
>>
>> To test that power save mode is running, run below command and
>> check there is no NULL Data frame seen by a sniffer:
>> iw dev <inf> set power_save off
>>
>> And run below command, then check there is a NULL Data frame
>> in sniffer:
>> iw dev <inf> set power_save on
>>
>> Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4
>>
>> Signed-off-by: Baochen Qiang <[email protected]>
>
> This had simple conflicts in hw_params, please check:
>
> https://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.git/commit/?h=pending&id=f776fd9ccb6561c4e4fdf05552a8b57a06686a90
>
LGTM
Baochen Qiang <[email protected]> wrote:
> To reduce power consumption enable 802.11 power save mode in
> station mode. This allows both radio and CPU to sleep more.
>
> Only enable the mode on WCN7850, other chips don't support it
> for now.
>
> To test that power save mode is running, run below command and
> check there is no NULL Data frame seen by a sniffer:
> iw dev <inf> set power_save off
>
> And run below command, then check there is a NULL Data frame
> in sniffer:
> iw dev <inf> set power_save on
>
> Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4
>
> Signed-off-by: Baochen Qiang <[email protected]>
> Acked-by: Jeff Johnson <[email protected]>
> Signed-off-by: Kalle Valo <[email protected]>
Patch applied to ath-next branch of ath.git, thanks.
54ca3308a23c wifi: ath12k: enable 802.11 power save mode in station mode
--
https://patchwork.kernel.org/project/linux-wireless/patch/[email protected]/
https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches