From: Abdul Hussain <[email protected]>
This patch removes unwanted true and false from boolean tests.
Signed-off-by: Abdul Hussain <[email protected]>
---
drivers/staging/wilc1000/coreconfigurator.c | 8 ++++----
drivers/staging/wilc1000/host_interface.c | 2 +-
drivers/staging/wilc1000/linux_mon.c | 2 +-
drivers/staging/wilc1000/linux_wlan.c | 2 +-
drivers/staging/wilc1000/wilc_wfi_cfgoperations.c | 4 ++--
drivers/staging/wilc1000/wilc_wlan.c | 4 ++--
6 files changed, 11 insertions(+), 11 deletions(-)
diff --git a/drivers/staging/wilc1000/coreconfigurator.c b/drivers/staging/wilc1000/coreconfigurator.c
index 9abc73d..616cf6d 100644
--- a/drivers/staging/wilc1000/coreconfigurator.c
+++ b/drivers/staging/wilc1000/coreconfigurator.c
@@ -1717,7 +1717,7 @@ s32 ParseResponse(u8 *resp, tstrWID *pstrWIDcfgResult)
idx++;
}
idx += 3;
- if ((u16WIDid == g_wid_num) && (num_wid_processed == false)) {
+ if ((u16WIDid == g_wid_num) && (!num_wid_processed)) {
num_wid_processed = true;
if (-2 == further_process_response(&resp[idx], u16WIDid, cfg_len, true, 0, &pstrWIDcfgResult[ResCnt])) {
@@ -1923,7 +1923,7 @@ s32 ConfigWaitResponse(WILC_Char *pcRespBuffer, s32 s32MaxRespBuffLen, s32 *ps32
* gstrConfigPktInfo.bRespRequired = bRespRequired;*/
- if (gstrConfigPktInfo.bRespRequired == true) {
+ if (gstrConfigPktInfo.bRespRequired) {
down(&SemHandlePktResp);
*ps32BytesRead = gstrConfigPktInfo.s32BytesRead;
@@ -1984,7 +1984,7 @@ s32 SendConfigPkt(u8 u8Mode, tstrWID *pstrWIDs,
ConfigWaitResponse(gps8ConfigPacket, MAX_PACKET_BUFF_SIZE, &s32RcvdRespLen, bRespRequired);
- if (bRespRequired == true) {
+ if (bRespRequired) {
/* If the operating Mode is GET, then we expect a response frame from */
/* the driver. Hence start listening to the port for response */
if (g_oper_mode == GET_CFG) {
@@ -2021,7 +2021,7 @@ s32 ConfigProvideResponse(WILC_Char *pcRespBuffer, s32 s32RespLen)
{
s32 s32Error = WILC_SUCCESS;
- if (gstrConfigPktInfo.bRespRequired == true) {
+ if (gstrConfigPktInfo.bRespRequired) {
if (s32RespLen <= gstrConfigPktInfo.s32MaxRespBuffLen) {
WILC_memcpy(gstrConfigPktInfo.pcRespBuffer, pcRespBuffer, s32RespLen);
gstrConfigPktInfo.s32BytesRead = s32RespLen;
diff --git a/drivers/staging/wilc1000/host_interface.c b/drivers/staging/wilc1000/host_interface.c
index 17ab5cd..be1f6bf 100644
--- a/drivers/staging/wilc1000/host_interface.c
+++ b/drivers/staging/wilc1000/host_interface.c
@@ -7816,7 +7816,7 @@ static void *host_int_ParseJoinBssParam(tstrNetworkInfo *ptstrNetworkInfo)
pNewJoinBssParam->rsn_cap[1] = pu8IEs[rsnIndex + 1];
rsnIndex += 2;
}
- pNewJoinBssParam->rsn_found = 1;
+ pNewJoinBssParam->rsn_found = true;
index += pu8IEs[index + 1] + 2; /* ID,Length bytes and IE body */
continue;
} else
diff --git a/drivers/staging/wilc1000/linux_mon.c b/drivers/staging/wilc1000/linux_mon.c
index 8cba13c..30d1c76 100644
--- a/drivers/staging/wilc1000/linux_mon.c
+++ b/drivers/staging/wilc1000/linux_mon.c
@@ -452,7 +452,7 @@ void WILC_mgm_HOSTAPD_ACK(void *priv, bool bStatus)
cb_hdr->rate = 5; /* txrate->bitrate / 5; */
- if (true == bStatus) {
+ if (bStatus) {
/* success */
cb_hdr->tx_flags = IEEE80211_RADIOTAP_F_TX_RTS;
} else {
diff --git a/drivers/staging/wilc1000/linux_wlan.c b/drivers/staging/wilc1000/linux_wlan.c
index c1e9272..c1cf5be 100644
--- a/drivers/staging/wilc1000/linux_wlan.c
+++ b/drivers/staging/wilc1000/linux_wlan.c
@@ -309,7 +309,7 @@ static int dev_state_ev_handler(struct notifier_block *this, unsigned long event
- if (bEnablePS == true)
+ if (bEnablePS)
host_int_set_power_mgmt((WILC_WFIDrvHandle)pstrWFIDrv, 1, 0);
PRINT_D(GENERIC_DBG, "[%s] Up IP\n", dev_iface->ifa_label);
diff --git a/drivers/staging/wilc1000/wilc_wfi_cfgoperations.c b/drivers/staging/wilc1000/wilc_wfi_cfgoperations.c
index 9861476..db0b782 100644
--- a/drivers/staging/wilc1000/wilc_wfi_cfgoperations.c
+++ b/drivers/staging/wilc1000/wilc_wfi_cfgoperations.c
@@ -624,7 +624,7 @@ static void CfgConnectResult(tenuConnDisconnEvent enuConnDisconnEvent,
}
}
- if (bNeedScanRefresh == true) {
+ if (bNeedScanRefresh) {
/*BugID_5418*/
/*Also, refrsh DIRECT- results if */
refresh_scan(priv, 1, true);
@@ -2817,7 +2817,7 @@ int WILC_WFI_set_power_mgmt(struct wiphy *wiphy, struct net_device *dev,
return -EIO;
}
- if (bEnablePS == true)
+ if (bEnablePS)
host_int_set_power_mgmt(priv->hWILCWFIDrv, enabled, timeout);
diff --git a/drivers/staging/wilc1000/wilc_wlan.c b/drivers/staging/wilc1000/wilc_wlan.c
index 762470c..db9e717 100644
--- a/drivers/staging/wilc1000/wilc_wlan.c
+++ b/drivers/staging/wilc1000/wilc_wlan.c
@@ -559,7 +559,7 @@ static int wilc_wlan_txq_add_net_pkt(void *priv, uint8_t *buffer, uint32_t buffe
#ifdef TCP_ACK_FILTER
tqe->tcp_PendingAck_index = NOT_TCP_ACK;
#ifdef TCP_ENHANCEMENTS
- if (is_TCP_ACK_Filter_Enabled() == true)
+ if (is_TCP_ACK_Filter_Enabled())
#endif
tcp_process(tqe);
#endif
@@ -2337,7 +2337,7 @@ u16 Set_machw_change_vir_if(bool bValue)
PRINT_ER("Error while Reading reg WILC_CHANGING_VIR_IF\n");
}
- if (bValue == true) {
+ if (bValue) {
reg |= (BIT31);
} else {
reg &= ~(BIT31);
--
1.9.1
On Tue, Jun 16, 2015 at 07:33:42AM +0000, Abdul, Hussain (H.) wrote:
> From: Abdul Hussain <[email protected]>
>
> This patch removes unwanted true and false from boolean tests.
>
> Signed-off-by: Abdul Hussain <[email protected]>
> ---
<snip>
> diff --git a/drivers/staging/wilc1000/host_interface.c b/drivers/staging/wilc1000/host_interface.c
> index 17ab5cd..be1f6bf 100644
> --- a/drivers/staging/wilc1000/host_interface.c
> +++ b/drivers/staging/wilc1000/host_interface.c
> @@ -7816,7 +7816,7 @@ static void *host_int_ParseJoinBssParam(tstrNetworkInfo *ptstrNetworkInfo)
> pNewJoinBssParam->rsn_cap[1] = pu8IEs[rsnIndex + 1];
> rsnIndex += 2;
> }
> - pNewJoinBssParam->rsn_found = 1;
> + pNewJoinBssParam->rsn_found = true;
But this is not a boolean test, this is an assignement.
regards
sudip
On Tuesday 16 June 2015 01:40 PM, Sudip Mukherjee wrote:
> On Tue, Jun 16, 2015 at 07:33:42AM +0000, Abdul, Hussain (H.) wrote:
>> From: Abdul Hussain <[email protected]>
>>
>> This patch removes unwanted true and false from boolean tests.
>>
>> Signed-off-by: Abdul Hussain <[email protected]>
>> ---
> <snip>
>> diff --git a/drivers/staging/wilc1000/host_interface.c b/drivers/staging/wilc1000/host_interface.c
>> index 17ab5cd..be1f6bf 100644
>> --- a/drivers/staging/wilc1000/host_interface.c
>> +++ b/drivers/staging/wilc1000/host_interface.c
>> @@ -7816,7 +7816,7 @@ static void *host_int_ParseJoinBssParam(tstrNetworkInfo *ptstrNetworkInfo)
>> pNewJoinBssParam->rsn_cap[1] = pu8IEs[rsnIndex + 1];
>> rsnIndex += 2;
>> }
>> - pNewJoinBssParam->rsn_found = 1;
>> + pNewJoinBssParam->rsn_found = true;
> But this is not a boolean test, this is an assignement.
>
> regards
> sudip
>
Sudip,
Yes that is an assignment to the boolean variable. Do i need to modify the commit message or to send separate patch?
Thanks,
Abdul
On Tue, Jun 16, 2015 at 08:55:13AM +0000, Abdul, Hussain (H.) wrote:
> On Tuesday 16 June 2015 01:40 PM, Sudip Mukherjee wrote:
> > On Tue, Jun 16, 2015 at 07:33:42AM +0000, Abdul, Hussain (H.) wrote:
> >> From: Abdul Hussain <[email protected]>
> >
> > regards
> > sudip
> >
> Sudip,
>
> Yes that is an assignment to the boolean variable. Do i need to modify the commit message or to send separate patch?
if that assignment is related to the change in boolean test then it should
be in the same patch. But in any case commit message should mention that
change and the reason.
regards
sudip
On Tuesday 16 June 2015 04:41 PM, Sudip Mukherjee wrote:
> On Tue, Jun 16, 2015 at 08:55:13AM +0000, Abdul, Hussain (H.) wrote:
>> On Tuesday 16 June 2015 01:40 PM, Sudip Mukherjee wrote:
>>> On Tue, Jun 16, 2015 at 07:33:42AM +0000, Abdul, Hussain (H.) wrote:
>>>> From: Abdul Hussain <[email protected]>
>>> regards
>>> sudip
>>>
>> Sudip,
>>
>> Yes that is an assignment to the boolean variable. Do i need to modify the commit message or to send separate patch?
> if that assignment is related to the change in boolean test then it should
> be in the same patch. But in any case commit message should mention that
> change and the reason.
>
> regards
> sudip
>
>
I have sent separate patch for this change.
Thanks,
Abdul