ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.15-rc2/2.6.15-rc2-mm1/
(temp copy at http://www.zip.com.au/~akpm/linux/patches/stuff/2.6.15-rc2-mm1.gz)
- Added git-sym2.patch to the -mm lineup: updates to the sym2 scsi driver
(Matthew Wilcox).
- The JSM tty driver still doesn't compile.
- The git-powerpc tree is included now.
Changes since 2.6.15-rc1-mm2:
linus.patch
git-acpi.patch
git-blktrace.patch
git-cfq.patch
git-cpufreq.patch
git-drm.patch
git-ieee1394.patch
git-kbuild.patch
git-libata-all.patch
git-netdev-all.patch
git-net.patch
git-ocfs2.patch
git-powerpc.patch
git-sym2.patch
git-pcmcia.patch
git-sas.patch
git-cryptodev.patch
Subsystem trees
-fix-copy-paste-bug-in-ohci-ppc-socc.patch
-add-success-failure-indication-to-rcu-torture-test.patch
-export-clear_page_dirty_for_io.patch
-ipmi-missing-null-test-for-kthread.patch
-ppc32-added-missing-define-for-fs_enet-ethernet-driver.patch
-tpm-use-flush_scheduled_work.patch
-tpm-use-ioread8-and-iowrite8.patch
-tpm-remove-pci-kconfig-dependency.patch
-md-dont-pass-null-file-into-prepare_write.patch
-md-fix-is_mddev_idle-calculation-now-that-disk-sector-accounting-happens-when-request-completes.patch
-ppc64-need-hpage_shift-when-huge-pages-disabled.patch
-s390-fix-class_device_create-calls-in-3270-the-driver.patch
-uml-eliminate-use-of-local-in-clone-stub.patch
-uml-eliminate-anonymous-union-and-clean-up-symlink-lossage.patch
-uml-properly-invoke-x86_64-system-calls.patch
-uml-eliminate-use-of-libc-page_size.patch
-unpaged-get_user_pages-vm_reserved.patch
-unpaged-private-write-vm_reserved.patch
-unpaged-sound-nopage-get_page.patch
-unpaged-unifdefed-pagecompound.patch
-unpaged-vm_unpaged.patch
-unpaged-vm_nonlinear-vm_reserved.patch
-unpaged-cow-on-vm_unpaged.patch
-unpaged-anon-in-vm_unpaged.patch
-unpaged-zero_page-in-vm_unpaged.patch
-unpaged-pg_reserved-bad_page.patch
-unpaged-copy_page_range-vma.patch
-fix-error-handling-with-put_compat_statfs.patch
-fix-hugetlbfs_statfs-reporting-of-block-limits.patch
-cpufreq-silence-warning-for-up.patch
-atkbd-speed-up-setting-leds-repeat-state.patch
-git-libata-sata_mv-build-fix.patch
-git-netdev-all-ieee80211_get_payload-warning-fix.patch
-gregkh-pci-pci-pci-error-reporting-callbacks.patch
-gregkh-pci-pci-documentation-for-pci-error-recovery.patch
-git-pcmcia-validate_mem-fix.patch
gregkh-usb-usbcore-central-handling-for-host-controllers-that-were-reset-during-suspend-resume.patch
-x86_64-register-disabled-processors.patch
-memhotplug-memory_hotplug_name-should-be-const.patch
-SIOCGIFCONF-data-corruption-in-ia32-emulation.patch
-fix-ifenslave-to-not-fail-on-lack-of-ip-information.patch
-r8169-printk_ratelimit-fix.patch
-wistron-laptop-button-driver.patch
-prefer-pkg-config-for-the-qt-check.patch
-compat-remove-leftovers-from-register_ioctl32_conversion.patch
-add-via-vt6410-support.patch
-drivers-ide-pci-alim15x3c-replace-pci_find_device-with-pci_dev_present.patch
-drivers-ide-pci-alim15x3c-use-kern_warning.patch
-cs5520-fix-return-value-of-cs5520_init_one.patch
Merged
+smp_call_function-must-be-a-macro.patch
Uniprocessor build fix
+revert-floppy-fix-read-only-handling.patch
Undo a floppy.c change
+nbd-fix-tx-rx-race-condition.patch
+nbd-fix-tx-rx-race-condition-update.patch
NBD driver fixes
+acpi-fix-passive-thermal-management.patch
+acpi-leave-thermal-passive-cooling-when-machine-cooled-down.patch
+acpi-fix-null-deref-in-video-lcd-brightness.patch
ACPI fixes
+mm-update-split-ptlock-kconfig.patch
+mm-unbloat-get_futex_key.patch
+mm-powerpc-ptlock-comments.patch
+mm-powerpc-init_mm-without-ptlock.patch
+mm-fill-arch-atomic64-gaps.patch
Memory management fixes
+kprobes-fix-return-probes-on-sys_execve.patch
kprobes fix
+fix-do_wait-vs-exec-race.patch
Fix a race.
+fix-crash-in-unregister_console.patch
unregister_console() robustness
+powerpc-fix-for-hugepage-areas-straddling-4gb-boundary.patch
powerpc hugepages fix
+jffs2-debug-gcc-29x-fix.patch
Fix jffs2 for old gcc's.
+acpi-kernel-doc-fixes-for-scanc.patch
ACPI update
+gregkh-driver-small-fixups-to-driver-core.patch
+gregkh-driver-kill-hotplug-word-from-driver-core.patch
+gregkh-driver-hotplug-always-enabled.patch
+gregkh-driver-hold-the-device-s-parent-s-lock-during-probe-and-remove.patch
Updates to the driver core tree
+gregkh-driver-merge-hotplug-and-uevent-vio-fix.patch
+gregkh-driver-merge-hotplug-and-uevent-macio_asic-fix.patch
+gregkh-driver-merge-hotplug-and-uevent-w9968cf-fix.patch
+kobject_uevent-config_netn-fix.patch
+gregkh-driver-kill-hotplug-word-from-driver-core-memory-fix.patch
Fix them.
+gregkh-i2c-hwmon-fix-missing-it87-fan-div-init.patch
i2c tree update
+small-hp_sdc_rtc-cleanup-use-no_llseek.patch
rtc driver cleanup
+git-netdev-all-s2io-warning-fix.patch
Fix a warning
+git-net-selinux-xfrmc-build-fix.patch
Fix git-net.patch
+gregkh-pci-pci-remove-bogus-resource-collision-error.patch
+gregkh-pci-pcie-make-bus_id-for-pci-express-devices-unique.patch
+gregkh-pci-pci-error-recovery-header-file-patch.patch
+gregkh-pci-shot-accross-the-bow.patch
Updates to the PCI tree
+ibmphp_pci-copy-n-paste-fix.patch
Fix hotplug PCI driver
+git-pcmcia-dev_to_instance-fix.patch
Fix git-pcmcia.patch
+gregkh-usb-usb-sn9c10x-driver-bad-page-state-fix.patch
+gregkh-usb-usb-ftdi_sio-new-ids-for-kobil-devices.patch
+gregkh-usb-usb-dynamic-id-01.patch
+gregkh-usb-usb-dynamic-id-02.patch
+gregkh-usb-usb-dynamic-id-03.patch
+gregkh-usb-usb-driver-owner.patch
+gregkh-usb-usb-driver-owner-removal.patch
+gregkh-usb-remove-usb-private-semaphore.patch
+gregkh-usb-disconnect-children-during-hub-unbind.patch
+gregkh-usb-usb-fix-locking-for-usb-suspend-resume.patch
USB tree updates
+usb-iomega-umini-is-unusual.patch
+fix-usb-suspend-resume-crasher.patch
USB fixes
+mpcore_wdtc-bogus-fpos-check.patch
Watchdog driver fixlet
+x86_64-compat-cfi.patch
+x86_64-defconfig-update.patch
+x86_64-dont-remove-nt.patch
+x86_64-bitops-constraints.patch
x86_64 tree update
+shrinker-nr-=-long_max-means-deadlock-for-icache.patch
Fix probably-not-a-bug in the vm scanning code
-mm-sparse-provide-pfn_to_nid.patch
Wrong, dropped.
+shut-up-warnings-in-ipc-shmc.patch
Fix some warnings
+swap-migration-v5-migrate_pages-function-do-not-free-the-page-in-swap_page.patch
Fix swap-migration-v5-migrate_pages-function.patch
+swapmig-switch-error-handling-in-migrate_pages-to-use-exx.patch
Swap migration update
+mempolicies-private-pointer-in-check_range-and-mpol_mf_invert.patch
+fold-numa_maps-into-memopoliciesc.patch
+mempolicies-unexport-get_vma_policy.patch
+move-page-migration-related-functions-near-do_migrate_pages.patch
+flatmem-split-out-memory-model.patch
+sparsemem-provide-pfn_to_nid.patch
+mm-free_pages_and_swap_cache-opt.patch
+mm-pagealloc-opt.patch
+mm-set_page_refs-opt.patch
+mm-microopt-conditions.patch
+mm-remove-bad_range.patch
+mm-remove-pcp-low.patch
+mm-page_state-fixes.patch
+mm-page_alloc-cleanups.patch
+mm-optimize-numa-policy-handling-in-slab-allocator.patch
+mm-free-pages-from-local-pcp-lists-under-tight-memory-conditions.patch
+slab-rename-obj_reallen-to-obj_size.patch
+slab-remove-unused-align-parameter-from-alloc_percpu.patch
+slab-extract-slabinfo-header-printing-to-separate-function.patch
+slab-extract-slab-order-calculation-to-separate-function.patch
+slab-fix-code-formatting.patch
+mm-add-is_dma_zone-helper.patch
+mm-add-populated_zone-helper.patch
Various memory management updates
+duplicate-ipw_debug-option-for-ipw2100-and-2200.patch
IPW driver cleanup
+tiacx-usb_driver-build-fix.patch
Update the ACX driver for changes in the driver core tree
+x86-convert-bigsmp-to-use-flat-physical-mode.patch
+x86-make-bigsmp-the-default-mode-if-config_hotplug_cpu.patch
+fix-rebooting-on-hp-nc6120-laptop.patch
x86 updates
+uml-arch-um-scripts-makefilerules-remove-duplicated-code.patch
+uml-fix-dynamic-linking-on-some-64-bit-distros.patch
UML updates
+s390-atomic-primitives.patch
+s390-cms-volume-label-definitions.patch
+s390-uaccess-warnings.patch
+s390-rt_sigreturn-fix.patch
+s390-update-default-configuration.patch
s390 updates
+use-ptrace_get_task_struct-in-various-places-fix-3.patch
Fix use-ptrace_get_task_struct-in-various-places-2.patch some more
+fix-overflow-tests-for-compat_sys_fcntl64-locking-re-fix.patch
Fix fix-overflow-tests-for-compat_sys_fcntl64-locking.patch
-optionally-skip-initramfs-check.patch
Dropped - we'll use a boot option instead
+add-block_device_operationsgetgeo-block-device-method.patch
+add-block_device_operationsgetgeo-block-device-method-fix.patch
+add-block_device_operationsgetgeo-block-device-method-fix-2.patch
blockdev layer cleanup
+nbd-remove-duplicate-assignment.patch
ndb fixlet
+unchecked-alloc_percpu-return-in-__create_workqueue.patch
Check alloc_per_cpu() return
+kdump-export-crash-notes-sysfs-remove-get-cpu.patch
+kdump-save-registers-early-inline-functions-fix.patch
+kdump-save-registers-early-inline-functions-fix-2.patch
+kdump-x86_64-add-elfcorehdr-command-line-option-fix.patch
+kdump-x86_64-add-elfcorehdr-command-line-option-fix-2.patch
kdump updates
+ktimers-rounding-fix.patch
ktimers fix
+solve-false-positive-soft-lockup-messages-during-ide-init.patch
IDE fix
+fbdev-shift-pixel-value-before-entering-loop-in-cfbimageblit.patch
+fbcon-sanitize-fbcon.patch
+fbdev-fix-incorrect-unaligned-access-in-little-endian-machines.patch
+nvidiafb-i2c-bus-name-beautification.patch
+fbcon-store-struct-display-when-setting-all-vcs.patch
+matroxfb-remove-fbconh-from-the-main-header-file.patch
+savagefb-one-more-i2c-enabled-device-in-savagefb.patch
fbdev updates
+device-mapper-add-dm_find_md.patch
+device-mapper-add-dm_get_md.patch
+device-mapper-ioctl-event-on-rename.patch
+device-mapper-snapshot-metadata-reading-separation.patch
+device-mapper-remove-unused-definition.patch
+device-mapper-scanf-sector-format-change.patch
+device-mapper-raid1-add-default-mirror.patch
+device-mapper-rename-frozen_bdev.patch
+device-mapper-make-lock_fs-optional.patch
+device-mapper-ioctl-add-skip-lock_fs-flag.patch
device mapper updates
+drivers-video-possible-cleanups.patch
+fs-ext2-bitmapc-ext2_count_free-is-only-required-ifdef-ext2fs_debug.patch
+fs-ext3-small-cleanups.patch
+build-kernel-intermodulec-only-when-required.patch
Minor fixes and cleanups
All 693 patches:
ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.15-rc2/2.6.15-rc2-mm1/patch-list
Quoting Andrew Morton ([email protected]):
> - The git-powerpc tree is included now.
Compiles and boots nicely on my power5 partition.
thanks,
-serge
Hi,
On 23/11/05, Andrew Morton <[email protected]> wrote:
>
> ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.15-rc2/2.6.15-rc2-mm1/
>
[1.] One line summary of the problem:
Oops while /etc/init.d/networking start. Full reproductible.
[3.] Keywords (i.e., modules, networking, kernel):
networking, iptables, netfilter
[4.] Kernel version (from /proc/version):
Linux version 2.6.15-rc2-mm1 (michal@debian) (gcc version 4.0.3
20051111 (prerelease) (Debian 4.0.2-4)) #12 SMP PREEMPT Wed Nov 23
14:19:16 CET 2005
[5.] Output of Oops
Nov 23 15:00:01 localhost kernel: eth0: network connection up using port A
Nov 23 15:00:01 localhost kernel: speed: 100
Nov 23 15:00:01 localhost kernel: autonegotiation: yes
Nov 23 15:00:01 localhost kernel: duplex mode: full
Nov 23 15:00:01 localhost kernel: flowctrl: symmetric
Nov 23 15:00:01 localhost kernel: irq moderation: disabled
Nov 23 15:00:01 localhost kernel: scatter-gather: enabled
Nov 23 15:00:01 localhost kernel: ip_tables: (C) 2000-2002 Netfilter core team
Nov 23 15:00:01 localhost kernel: Debug: sleeping function called from
invalid context at include/asm/semaphore.h:123
Nov 23 15:00:01 localhost kernel: in_atomic():1, irqs_disabled():0
Nov 23 15:00:01 localhost kernel: [<c0103be6>] dump_stack+0x17/0x19
Nov 23 15:00:01 localhost kernel: [<c011a0c3>] __might_sleep+0x9c/0xae
Nov 23 15:00:01 localhost kernel: [<fd9a090d>]
translate_table+0x147/0xc14 [ip_tables]
Nov 23 15:00:01 localhost kernel: [<fd9a2b2a>]
ipt_register_table+0x93/0x20d [ip_tables]
Nov 23 15:00:01 localhost kernel: [<f98fe027>] init+0x27/0x9e [iptable_filter]
Nov 23 15:00:01 localhost kernel: [<c01376d0>] sys_init_module+0xd7/0x26c
Nov 23 15:00:01 localhost kernel: [<c0102cc7>] sysenter_past_esp+0x54/0x75
Nov 23 15:00:01 localhost kernel: ---------------------------
Nov 23 15:00:01 localhost kernel: | preempt count: 00000001 ]
Nov 23 15:00:01 localhost kernel: | 1 level deep critical section nesting:
Nov 23 15:00:01 localhost kernel: ----------------------------------------
Nov 23 15:00:01 localhost kernel: .. [<fd9a2aca>] ....
ipt_register_table+0x33/0x20d [ip_tables]
Nov 23 15:00:01 localhost kernel: .....[<f98fe027>] .. ( <=
init+0x27/0x9e [iptable_filter])
Nov 23 15:00:01 localhost kernel:
Nov 23 15:00:01 localhost kernel: ip_conntrack version 2.4 (8185
buckets, 65480 max) - 172 bytes per conntrack
Nov 23 15:00:01 localhost kernel: scheduling while atomic:
iptables/0x00000001/2121
Nov 23 15:00:01 localhost kernel: [<c0103be6>] dump_stack+0x17/0x19
Nov 23 15:00:01 localhost kernel: [<c0297b5c>] schedule+0xb8c/0xe65
Nov 23 15:00:01 localhost kernel: [<c0297f80>] wait_for_completion+0x95/0xf4
Nov 23 15:00:01 localhost kernel: [<c012c72c>]
call_usermodehelper_keys+0xcb/0xdf
Nov 23 15:00:01 localhost kernel: [<c012c476>] request_module+0x96/0xda
Nov 23 15:00:01 localhost kernel: [<fd9a1170>]
translate_table+0x9aa/0xc14 [ip_tables]
Nov 23 15:00:01 localhost kernel: [<fd9a1ac1>] do_replace+0x11f/0x7e6
[ip_tables]
Nov 23 15:00:01 localhost kernel: [<fd9a2437>]
do_ipt_set_ctl+0x50/0x57 [ip_tables]
Nov 23 15:00:01 localhost kernel: [<c026118c>] nf_sockopt+0xc2/0x128
Nov 23 15:00:01 localhost kernel: [<c0261213>] nf_setsockopt+0x21/0x27
Nov 23 15:00:01 localhost kernel: [<c026d2bc>] ip_setsockopt+0xc3/0xcfb
Nov 23 15:00:01 localhost kernel: [<c0285ebc>] raw_setsockopt+0x25/0x50
Nov 23 15:00:01 localhost kernel: [<c024a780>] sock_common_setsockopt+0x1e/0x25
Nov 23 15:00:01 localhost kernel: [<c02480dd>] sys_setsockopt+0x4b/0x7f
Nov 23 15:00:01 localhost kernel: [<c024875e>] sys_socketcall+0x212/0x275
Nov 23 15:00:01 localhost kernel: [<c0102cc7>] sysenter_past_esp+0x54/0x75
Nov 23 15:00:01 localhost kernel: ---------------------------
Nov 23 15:00:01 localhost kernel: | preempt count: 00000001 ]
Nov 23 15:00:01 localhost kernel: | 1 level deep critical section nesting:
Nov 23 15:00:01 localhost kernel: ----------------------------------------
Nov 23 15:00:01 localhost kernel: .. [<fd9a1a18>] ....
do_replace+0x76/0x7e6 [ip_tables]
Nov 23 15:00:01 localhost kernel: .....[<fd9a2437>] .. ( <=
do_ipt_set_ctl+0x50/0x57 [ip_tables])
Nov 23 15:00:01 localhost kernel:
Nov 23 15:00:01 localhost kernel: NET: Registered protocol family 10
Nov 23 15:00:01 localhost kernel: IPv6 over IPv4 tunneling driver
Nov 23 15:00:01 localhost kernel: eth0: no IPv6 routers present
Nov 23 15:00:02 localhost kernel: Debug: sleeping function called from
invalid context at arch/i386/lib/usercopy.c:728
Nov 23 15:00:02 localhost kernel: in_atomic():1, irqs_disabled():0
Nov 23 15:00:02 localhost kernel: [<c0103be6>] dump_stack+0x17/0x19
Nov 23 15:00:02 localhost kernel: [<c011a0c3>] __might_sleep+0x9c/0xae
Nov 23 15:00:02 localhost kernel: [<c01cdd48>] copy_to_user+0x1b/0x63
Nov 23 15:00:02 localhost kernel: [<fd9a15b4>]
copy_entries_to_user+0x6d/0x1a1 [ip_tables]
Nov 23 15:00:02 localhost kernel: [<fd9a1864>]
get_entries+0x17c/0x1a1 [ip_tables]
Nov 23 15:00:02 localhost kernel: [<fd9a24cd>]
do_ipt_get_ctl+0x8f/0x4e7 [ip_tables]
Nov 23 15:00:02 localhost kernel: [<c0261159>] nf_sockopt+0x8f/0x128
Nov 23 15:00:02 localhost kernel: [<c026123a>] nf_getsockopt+0x21/0x27
Nov 23 15:00:02 localhost kernel: [<c026df71>] ip_getsockopt+0x7d/0x59c
Nov 23 15:00:02 localhost kernel: [<c0285f0c>] raw_getsockopt+0x25/0x50
Nov 23 15:00:02 localhost kernel: [<c024a708>] sock_common_getsockopt+0x1e/0x25
Nov 23 15:00:02 localhost kernel: [<c0248154>] sys_getsockopt+0x43/0x7a
Nov 23 15:00:02 localhost kernel: [<c0248786>] sys_socketcall+0x23a/0x275
Nov 23 15:00:02 localhost kernel: [<c0102cc7>] sysenter_past_esp+0x54/0x75
Nov 23 15:00:02 localhost kernel: ---------------------------
Nov 23 15:00:02 localhost kernel: | preempt count: 00000001 ]
Nov 23 15:00:02 localhost kernel: | 1 level deep critical section nesting:
Nov 23 15:00:02 localhost kernel: ----------------------------------------
Nov 23 15:00:02 localhost kernel: .. [<fd9a159b>] ....
copy_entries_to_user+0x54/0x1a1 [ip_tables]
Nov 23 15:00:02 localhost kernel: .....[<fd9a1864>] .. ( <=
get_entries+0x17c/0x1a1 [ip_tables])
Nov 23 15:00:02 localhost kernel:
[7.] Environment
[7.1.] Software
If some fields are empty or look unusual you may have an old version.
Compare to the current minimal requirements in Documentation/Changes.
Linux debian 2.6.15-rc2-mm1 #12 SMP PREEMPT Wed Nov 23 14:19:16 CET
2005 i686 GNU/Linux
Gnu C 4.0.3
Gnu make 3.80
binutils 2.16.91
util-linux 2.12p
mount 2.12p
module-init-tools 3.2-pre9
e2fsprogs 1.38
jfsutils 1.1.8
reiserfsprogs 3.6.19
reiser4progs 1.0.5
xfsprogs 2.7.7
Linux C Library 2.3.5
Dynamic linker (ldd) 2.3.5
Procps 3.2.6
Net-tools 1.60
Console-tools 0.2.3
Sh-utils 5.93
udev 074
Modules Loaded binfmt_misc ipv6 ipt_limit ipt_LOG ipt_REJECT
ip_conntrack_ftp ipt_state ip_conntrack iptable_filter ip_tables
af_packet ide_generic ide_cd cdrom ide_disk generic snd_intel8x0
snd_ac97_codec snd_ac97_bus snd_pcm_oss snd_mixer_oss psmouse snd_pcm
snd_timer snd parport_pc parport 8250_pnp sk98lin 8250 serial_core
piix rtc soundcore ide_core snd_page_alloc ehci_hcd intel_agp agpgart
hw_random uhci_hcd usbcore unix
[7.3.] Module information
binfmt_misc 9480 1 - Live 0xfd973000
ipv6 227008 8 - Live 0xfdeee000
ipt_limit 2432 7 - Live 0xfd98d000
ipt_LOG 6400 5 - Live 0xfd992000
ipt_REJECT 4736 1 - Live 0xfd95a000
ip_conntrack_ftp 6384 0 - Live 0xfd94a000
ipt_state 2048 0 - Live 0xf98fe000
ip_conntrack 41240 2 ip_conntrack_ftp,ipt_state, Live 0xfd967000
iptable_filter 2816 1 - Live 0xf8854000
ip_tables 21212 5
ipt_limit,ipt_LOG,ipt_REJECT,ipt_state,iptable_filter, Live 0xfd9a0000
af_packet 13960 2 - Live 0xfd955000
ide_generic 1536 0 [permanent], Live 0xf884b000
ide_cd 35460 0 - Live 0xfd940000
cdrom 34464 1 ide_cd, Live 0xfd936000
ide_disk 14592 0 - Live 0xfd931000
generic 4612 0 [permanent], Live 0xfd94d000
snd_intel8x0 27932 0 - Live 0xfd95f000
snd_ac97_codec 86048 1 snd_intel8x0, Live 0xfd9b3000
snd_ac97_bus 2432 1 snd_ac97_codec, Live 0xf8845000
snd_pcm_oss 45472 0 - Live 0xfd913000
snd_mixer_oss 16128 1 snd_pcm_oss, Live 0xf98f9000
psmouse 37284 0 - Live 0xfd908000
snd_pcm 76932 3 snd_intel8x0,snd_ac97_codec,snd_pcm_oss, Live 0xf98e5000
snd_timer 21252 1 snd_pcm, Live 0xf98de000
snd 46948 6 snd_intel8x0,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer,
Live 0xf98d1000
parport_pc 22212 0 - Live 0xfd901000
parport 21440 1 parport_pc, Live 0xf98ca000
8250_pnp 8832 0 - Live 0xf887c000
sk98lin 158944 0 - Live 0xf989d000
8250 24612 1 8250_pnp, Live 0xf8874000
serial_core 17792 1 8250, Live 0xf886e000
piix 9348 0 [permanent], Live 0xf8856000
rtc 10420 0 - Live 0xf8850000
soundcore 8032 1 snd, Live 0xf884d000
ide_core 109732 5 ide_generic,ide_cd,ide_disk,generic,piix, Live 0xf9881000
snd_page_alloc 8584 2 snd_intel8x0,snd_pcm, Live 0xf8847000
ehci_hcd 27784 0 - Live 0xf883a000
intel_agp 19228 1 - Live 0xf8834000
agpgart 27740 1 intel_agp, Live 0xf882c000
hw_random 4756 0 - Live 0xf8842000
uhci_hcd 29712 0 - Live 0xf885d000
usbcore 111620 3 ehci_hcd,uhci_hcd, Live 0xf880d000
unix 24208 54 - Live 0xf8867000
[7.8.] dmesg log
Linux version 2.6.15-rc2-mm1 (michal@debian) (gcc version 4.0.3
20051111 (prerelease) (Debian 4.0.2-4)) #12 SMP PREEMPT Wed Nov 23
14:19:16 CET 2005
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000003ff30000 (usable)
BIOS-e820: 000000003ff30000 - 000000003ff40000 (ACPI data)
BIOS-e820: 000000003ff40000 - 000000003fff0000 (ACPI NVS)
BIOS-e820: 000000003fff0000 - 0000000040000000 (reserved)
BIOS-e820: 00000000ffb80000 - 0000000100000000 (reserved)
127MB HIGHMEM available.
896MB LOWMEM available.
found SMP MP-table at 000ff780
On node 0 totalpages: 261936
DMA zone: 4096 pages, LIFO batch:2
DMA32 zone: 0 pages, LIFO batch:2
Normal zone: 225280 pages, LIFO batch:64
HighMem zone: 32560 pages, LIFO batch:16
DMI 2.3 present.
ACPI: RSDP (v000 ACPIAM ) @ 0x000f9e30
ACPI: RSDT (v001 A M I OEMRSDT 0x10000414 MSFT 0x00000097) @ 0x3ff30000
ACPI: FADT (v002 A M I OEMFACP 0x10000414 MSFT 0x00000097) @ 0x3ff30200
ACPI: MADT (v001 A M I OEMAPIC 0x10000414 MSFT 0x00000097) @ 0x3ff30390
ACPI: OEMB (v001 A M I OEMBIOS 0x10000414 MSFT 0x00000097) @ 0x3ff40040
ACPI: DSDT (v001 P4P81 P4P81104 0x00000104 INTL 0x02002026) @ 0x00000000
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Processor #0 15:2 APIC version 20
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
Processor #1 15:2 APIC version 20
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode: Flat. Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 50000000 (gap: 40000000:bfb80000)
Built 1 zonelists
mapped APIC to ffffd000 (fee00000)
mapped IOAPIC to ffffc000 (fec00000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
Kernel command line: root=/dev/sda1 ro
CPU 0 irqstacks, hard=c037a000 soft=c0378000
PID hash table entries: 4096 (order: 12, 65536 bytes)
Detected 2798.917 MHz processor.
Using tsc for high-res timesource
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 1022904k/1047744k available (1648k kernel code, 23992k
reserved, 679k data, 172k init, 130240k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 5603.43 BogoMIPS (lpj=2801716)
Mount-cache hash table entries: 512
CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000
00004400 00000000 00000000
CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000
00004400 00000000 00000000
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 512K
CPU: Physical Processor ID: 0
CPU: After all inits, caps: bfebfbf7 00000000 00000000 00000080
00004400 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
CPU0: Thermal monitoring enabled
mtrr: v2.0 (20020519)
Checking 'hlt' instruction... OK.
CPU0: Intel(R) Pentium(R) 4 CPU 2.80GHz stepping 05
Booting processor 1/1 eip 2000
CPU 1 irqstacks, hard=c037b000 soft=c0379000
Initializing CPU#1
Calibrating delay using timer specific routine.. 5596.57 BogoMIPS (lpj=2798286)
CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000
00004400 00000000 00000000
CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000
00004400 00000000 00000000
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 512K
CPU: Physical Processor ID: 0
CPU: After all inits, caps: bfebfbf7 00000000 00000000 00000080
00004400 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#1.
CPU1: Intel P4/Xeon Extended MCE MSRs (12) available
CPU1: Thermal monitoring enabled
CPU1: Intel(R) Pentium(R) 4 CPU 2.80GHz stepping 05
Total of 2 processors activated (11200.00 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
checking TSC synchronization across 2 CPUs: passed.
Brought up 2 CPUs
-> [0][1][ 262144] 0.0 [ 0.0] (0): ( 2578 1289)
-> [0][1][ 275941] 0.0 [ 0.0] (0): ( 3565 1138)
-> [0][1][ 290464] 0.0 [ 0.0] (0): ( 3013 845)
-> [0][1][ 305751] 0.0 [ 0.0] (0): ( -549 2203)
-> [0][1][ 321843] 0.0 [ 0.0] (0): ( 1530 2141)
-> [0][1][ 338782] 0.0 [ 0.0] (0): ( 4217 2414)
-> [0][1][ 356612] 0.0 [ 0.0] (0): ( 6782 2489)
-> [0][1][ 375381] 0.0 [ 0.0] (0): ( 310 4480)
-> [0][1][ 395137] 0.0 [ 0.0] (0): ( -3681 4235)
-> [0][1][ 415933] 0.0 [ 0.0] (0): ( 3258 5587)
-> [0][1][ 437824] 0.0 [ 0.0] (0): ( 11091 6710)
-> [0][1][ 460867] 0.0 [ 0.0] (0): ( 18919 7269)
-> [0][1][ 485123] 0.0 [ 0.0] (0): ( 19859 4104)
-> [0][1][ 510655] 0.0 [ 0.0] (0): ( 30075 7160)
-> [0][1][ 537531] 0.0 [ 0.0] (0): ( 73914 25499)
-> [0][1][ 565822] 0.0 [ 0.0] (0): ( 20161 39626)
-> [0][1][ 595602] 0.0 [ 0.0] (0): ( -3449 31618)
-> [0][1][ 626949] 0.0 [ 0.0] (0): ( 13249 24158)
-> [0][1][ 659946] 0.0 [ 0.0] (0): ( -9778 23592)
-> [0][1][ 694680] 0.0 [ 0.0] (0): ( -6396 13487)
-> [0][1][ 731242] 0.0 [ 0.0] (0): ( -6873 6982)
-> found max.
[0][1] working set size found: 537531, cost: 73914
---------------------
| migration cost matrix (max_cache_size: 524288, cpu: 2798 MHz):
---------------------
[00] [01]
[00]: - 0.1(0)
[01]: 0.1(0) -
--------------------------------
| cacheflush times [1]: 0.1 (147828)
| calibration delay: 0 seconds
--------------------------------
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=2
PCI: Using configuration type 1
ACPI: Subsystem revision 20050916
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
PCI quirk: region 0800-087f claimed by ICH4 ACPI/GPIO/TCO
PCI quirk: region 0480-04bf claimed by ICH4 GPIO
PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
Boot video device is 0000:01:00.0
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 14 devices
SCSI subsystem initialized
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
PCI: Cannot allocate resource region 0 of device 0000:00:00.0
pnp: 00:0a: ioport range 0x680-0x6ff has been reserved
pnp: 00:0a: ioport range 0x290-0x297 has been reserved
PCI: Bridge: 0000:00:01.0
IO window: disabled.
MEM window: f6000000-f7efffff
PREFETCH window: e8000000-f4ffffff
PCI: Bridge: 0000:00:1e.0
IO window: e000-efff
MEM window: f7f00000-fbffffff
PREFETCH window: disabled.
PCI: Setting latency timer of device 0000:00:1e.0 to 64
audit: initializing netlink socket (disabled)
audit(1132754358.103:1): initialized
highmem bounce pool size: 64 pages
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
io scheduler noop registered
io scheduler anticipatory registered
ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
nvidiafb: nVidia device/chipset 10DE0322
nvidiafb: CRTC0 analog found
nvidiafb: CRTC1 analog not found
nvidiafb: EDID found from BUS1
nvidiafb: CRTC 0 appears to have a CRT attached
nvidiafb: Using CRT on CRTC 0
nvidiafb: MTRR set to ON
Console: switching to colour frame buffer device 128x48
nvidiafb: PCI nVidia NV32 framebuffer (64MB @ 0xE8000000)
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
libata version 1.20 loaded.
ata_piix 0000:00:1f.2: version 1.05
ACPI: PCI Interrupt 0000:00:1f.2[A] -> GSI 18 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:00:1f.2 to 64
ata1: SATA max UDMA/133 cmd 0xCC00 ctl 0xC882 bmdma 0xC400 irq 17
ata2: SATA max UDMA/133 cmd 0xC800 ctl 0xC482 bmdma 0xC408 irq 17
input: AT Translated Set 2 keyboard as /class/input/input0
ata1: dev 0 cfg 49:2f00 82:7c6b 83:7f09 84:4003 85:7c69 86:3e01 87:4003 88:207f
ata1: dev 0 ATA-7, max UDMA/133, 398297088 sectors: LBA48
ata1: dev 0 configured for UDMA/133
scsi0 : ata_piix
ATA: abnormal status 0x7F on port 0xC807
scsi1 : ata_piix
Vendor: ATA Model: Maxtor 6Y200M0 Rev: YAR5
Type: Direct-Access ANSI SCSI revision: 05
SCSI device sda: 398297088 512-byte hdwr sectors (203928 MB)
SCSI device sda: drive cache: write back
SCSI device sda: 398297088 512-byte hdwr sectors (203928 MB)
SCSI device sda: drive cache: write back
sda: sda1 sda2 sda3
sd 0:0:0:0: Attached scsi disk sda
NET: Registered protocol family 2
IP route cache hash table entries: 65536 (order: 6, 262144 bytes)
TCP established hash table entries: 131072 (order: 9, 3145728 bytes)
TCP bind hash table entries: 65536 (order: 8, 1572864 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
TCP bic registered
Starting balanced_irq
Using IPI Shortcut mode
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 172k freed
NET: Registered protocol family 1
usbcore: registered new driver usbfs
usbcore: registered new driver hub
USB Universal Host Controller Interface driver v2.3
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000d480
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
hw_random hardware driver 1.0.0 loaded
Linux agpgart interface v0.101 (c) Dave Jones
ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.1: irq 18, io base 0x0000d800
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Real Time Clock Driver v1.12
ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.2: irq 17, io base 0x0000d880
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.3[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1d.3 to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000dc00
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
agpgart: Detected an Intel 865 Chipset.
00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
agpgart: AGP aperture is 64M @ 0x54000000
00:08: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: debug port 1
PCI: cache line size of 128 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
ehci_hcd 0000:00:1d.7: irq 19, io mem 0xf5fffc00
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 8 ports detected
parport: PnPBIOS parport detected.
parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP(,...)]
ICH5: IDE controller at PCI slot 0000:00:1f.1
PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 17
ICH5: chipset revision 2
ICH5: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:DMA, hdd:DMA
Probing IDE interface ide0...
hda: Maxtor 4D040H2, ATA DISK drive
input: ImPS/2 Generic Wheel Mouse as /class/input/input1
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: LITE-ON DVDRW SOHW-1653S, ATAPI CD/DVD-ROM drive
hdd: LITE-ON LTR-52327S, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
ACPI: PCI Interrupt 0000:02:05.0[A] -> GSI 22 (level, low) -> IRQ 20
ACPI: PCI Interrupt 0000:02:05.0[A] -> GSI 22 (level, low) -> IRQ 20
eth0: 3Com Gigabit LOM (3C940)
PrefPort:A RlmtMode:Check Link State
ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 17 (level, low) -> IRQ 21
PCI: Setting latency timer of device 0000:00:1f.5 to 64
AC'97 0 analog subsections not ready
intel8x0_measure_ac97_clock: measured 51082 usecs
intel8x0: clocking to 48000
hda: max request size: 1024KiB
hda: 80022600 sectors (40971 MB) w/2048KiB Cache, CHS=16383/255/63, UDMA(100)
hda: cache flushes not supported
hda: hda1 hda2 < hda5 hda6 >
hdc: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
hdd: ATAPI 52X CD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
Adding 3903784k swap on /dev/sda2. Priority:-1 extents:1 across:3903784k
EXT3 FS on sda1, internal journal
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda3, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
NET: Registered protocol family 17
eth0: network connection up using port A
speed: 100
autonegotiation: yes
duplex mode: full
flowctrl: symmetric
irq moderation: disabled
scatter-gather: enabled
ip_tables: (C) 2000-2002 Netfilter core team
Debug: sleeping function called from invalid context at
include/asm/semaphore.h:123
in_atomic():1, irqs_disabled():0
[<c0103be6>] dump_stack+0x17/0x19
[<c011a0c3>] __might_sleep+0x9c/0xae
[<fd9a090d>] translate_table+0x147/0xc14 [ip_tables]
[<fd9a2b2a>] ipt_register_table+0x93/0x20d [ip_tables]
[<f98fe027>] init+0x27/0x9e [iptable_filter]
[<c01376d0>] sys_init_module+0xd7/0x26c
[<c0102cc7>] sysenter_past_esp+0x54/0x75
---------------------------
| preempt count: 00000001 ]
| 1 level deep critical section nesting:
----------------------------------------
.. [<fd9a2aca>] .... ipt_register_table+0x33/0x20d [ip_tables]
.....[<f98fe027>] .. ( <= init+0x27/0x9e [iptable_filter])
ip_conntrack version 2.4 (8185 buckets, 65480 max) - 172 bytes per conntrack
scheduling while atomic: iptables/0x00000001/2121
[<c0103be6>] dump_stack+0x17/0x19
[<c0297b5c>] schedule+0xb8c/0xe65
[<c0297f80>] wait_for_completion+0x95/0xf4
[<c012c72c>] call_usermodehelper_keys+0xcb/0xdf
[<c012c476>] request_module+0x96/0xda
[<fd9a1170>] translate_table+0x9aa/0xc14 [ip_tables]
[<fd9a1ac1>] do_replace+0x11f/0x7e6 [ip_tables]
[<fd9a2437>] do_ipt_set_ctl+0x50/0x57 [ip_tables]
[<c026118c>] nf_sockopt+0xc2/0x128
[<c0261213>] nf_setsockopt+0x21/0x27
[<c026d2bc>] ip_setsockopt+0xc3/0xcfb
[<c0285ebc>] raw_setsockopt+0x25/0x50
[<c024a780>] sock_common_setsockopt+0x1e/0x25
[<c02480dd>] sys_setsockopt+0x4b/0x7f
[<c024875e>] sys_socketcall+0x212/0x275
[<c0102cc7>] sysenter_past_esp+0x54/0x75
---------------------------
| preempt count: 00000001 ]
| 1 level deep critical section nesting:
----------------------------------------
.. [<fd9a1a18>] .... do_replace+0x76/0x7e6 [ip_tables]
.....[<fd9a2437>] .. ( <= do_ipt_set_ctl+0x50/0x57 [ip_tables])
NET: Registered protocol family 10
IPv6 over IPv4 tunneling driver
eth0: no IPv6 routers present
Debug: sleeping function called from invalid context at
arch/i386/lib/usercopy.c:728
in_atomic():1, irqs_disabled():0
[<c0103be6>] dump_stack+0x17/0x19
[<c011a0c3>] __might_sleep+0x9c/0xae
[<c01cdd48>] copy_to_user+0x1b/0x63
[<fd9a15b4>] copy_entries_to_user+0x6d/0x1a1 [ip_tables]
[<fd9a1864>] get_entries+0x17c/0x1a1 [ip_tables]
[<fd9a24cd>] do_ipt_get_ctl+0x8f/0x4e7 [ip_tables]
[<c0261159>] nf_sockopt+0x8f/0x128
[<c026123a>] nf_getsockopt+0x21/0x27
[<c026df71>] ip_getsockopt+0x7d/0x59c
[<c0285f0c>] raw_getsockopt+0x25/0x50
[<c024a708>] sock_common_getsockopt+0x1e/0x25
[<c0248154>] sys_getsockopt+0x43/0x7a
[<c0248786>] sys_socketcall+0x23a/0x275
[<c0102cc7>] sysenter_past_esp+0x54/0x75
---------------------------
| preempt count: 00000001 ]
| 1 level deep critical section nesting:
----------------------------------------
.. [<fd9a159b>] .... copy_entries_to_user+0x54/0x1a1 [ip_tables]
.....[<fd9a1864>] .. ( <= get_entries+0x17c/0x1a1 [ip_tables])
[7.11.] sysctl -A
[8.] Config file
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.15-rc1-mm2
# Fri Nov 18 13:12:45 2005
#
CONFIG_X86_32=y
CONFIG_SEMAPHORE_SLEEPERS=y
CONFIG_X86=y
CONFIG_MMU=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
#
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SWAP_PREFETCH=y
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
CONFIG_SYSCTL=y
CONFIG_AUDIT=y
CONFIG_AUDITSYSCALL=y
CONFIG_HOTPLUG=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
# CONFIG_CPUSETS is not set
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_DOUBLEFAULT=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
CONFIG_CC_ALIGN_FUNCTIONS=0
CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
CONFIG_SLAB=y
# CONFIG_INITRAMFS_SKIP is not set
CONFIG_SERIAL_PCI=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_SLOB is not set
#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_OBSOLETE_MODPARM=y
# CONFIG_MODVERSIONS is not set
CONFIG_MODULE_SRCVERSION_ALL=y
CONFIG_KMOD=y
CONFIG_STOP_MACHINE=y
#
# Block layer
#
# CONFIG_LBD is not set
CONFIG_BLK_DEV_IO_TRACE=y
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=m
CONFIG_IOSCHED_CFQ=m
CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
#
# Processor type and features
#
CONFIG_X86_PC=y
# CONFIG_X86_ELAN is not set
# CONFIG_X86_VOYAGER is not set
# CONFIG_X86_NUMAQ is not set
# CONFIG_X86_SUMMIT is not set
# CONFIG_X86_BIGSMP is not set
# CONFIG_X86_VISWS is not set
# CONFIG_X86_GENERICARCH is not set
# CONFIG_X86_ES7000 is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
CONFIG_MPENTIUM4=y
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP2 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MGEODEGX1 is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_X86_GENERIC is not set
CONFIG_X86_CMPXCHG=y
CONFIG_X86_XADD=y
CONFIG_X86_L1_CACHE_SHIFT=7
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_X86_CMPXCHG64=y
CONFIG_X86_GOOD_APIC=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_X86_TSC=y
# CONFIG_HPET_TIMER is not set
CONFIG_SMP=y
CONFIG_NR_CPUS=2
CONFIG_SCHED_SMT=y
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
CONFIG_PREEMPT_BKL=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_MCE=y
CONFIG_X86_MCE_NONFATAL=m
CONFIG_X86_MCE_P4THERMAL=y
# CONFIG_TOSHIBA is not set
# CONFIG_I8K is not set
# CONFIG_X86_REBOOTFIXUPS is not set
CONFIG_MICROCODE=m
CONFIG_X86_MSR=m
CONFIG_X86_CPUID=m
#
# Firmware Drivers
#
# CONFIG_EDD is not set
# CONFIG_DELL_RBU is not set
# CONFIG_DCDBAS is not set
# CONFIG_NOHIGHMEM is not set
CONFIG_HIGHMEM4G=y
# CONFIG_HIGHMEM64G is not set
CONFIG_HIGHMEM=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_SPARSEMEM_STATIC=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_HIGHPTE is not set
# CONFIG_MATH_EMULATION is not set
CONFIG_MTRR=y
# CONFIG_EFI is not set
CONFIG_IRQBALANCE=y
CONFIG_REGPARM=y
CONFIG_SECCOMP=y
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not set
CONFIG_HZ_1000=y
CONFIG_HZ=1000
CONFIG_PHYSICAL_START=0x100000
CONFIG_KEXEC=y
#
# Power management options (ACPI, APM)
#
CONFIG_PM=y
# CONFIG_PM_LEGACY is not set
# CONFIG_PM_DEBUG is not set
#
# ACPI (Advanced Configuration and Power Interface) Support
#
CONFIG_ACPI=y
# CONFIG_ACPI_AC is not set
# CONFIG_ACPI_BATTERY is not set
# CONFIG_ACPI_BUTTON is not set
# CONFIG_ACPI_VIDEO is not set
# CONFIG_ACPI_HOTKEY is not set
CONFIG_ACPI_FAN=m
CONFIG_ACPI_PROCESSOR=m
CONFIG_ACPI_THERMAL=m
# CONFIG_ACPI_ASUS is not set
# CONFIG_ACPI_IBM is not set
# CONFIG_ACPI_TOSHIBA is not set
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_SYSTEM=y
# CONFIG_X86_PM_TIMER is not set
# CONFIG_ACPI_CONTAINER is not set
#
# APM (Advanced Power Management) BIOS Support
#
#
# CPU Frequency scaling
#
# CONFIG_CPU_FREQ is not set
#
# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
#
CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GOMMCONFIG is not set
# CONFIG_PCI_GODIRECT is not set
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
# CONFIG_PCIEPORTBUS is not set
# CONFIG_PCI_MSI is not set
CONFIG_PCI_LEGACY_PROC=y
# CONFIG_PCI_DEBUG is not set
CONFIG_ISA_DMA_API=y
# CONFIG_ISA is not set
# CONFIG_MCA is not set
# CONFIG_SCx200 is not set
# CONFIG_HOTPLUG_CPU is not set
#
# PCCARD (PCMCIA/CardBus) support
#
# CONFIG_PCCARD is not set
#
# PCI Hotplug Support
#
# CONFIG_HOTPLUG_PCI is not set
#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_AOUT=m
CONFIG_BINFMT_MISC=m
#
# Networking
#
CONFIG_NET=y
#
# Networking options
#
CONFIG_PACKET=m
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=m
# CONFIG_NET_KEY is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_FIB_HASH=y
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_TUNNEL is not set
CONFIG_INET_DIAG=m
CONFIG_INET_TCP_DIAG=m
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_BIC=y
#
# IP: Virtual Server Configuration
#
# CONFIG_IP_VS is not set
CONFIG_IPV6=m
# CONFIG_IPV6_PRIVACY is not set
# CONFIG_INET6_AH is not set
# CONFIG_INET6_ESP is not set
# CONFIG_INET6_IPCOMP is not set
# CONFIG_INET6_TUNNEL is not set
# CONFIG_IPV6_TUNNEL is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
#
# Core Netfilter Configuration
#
CONFIG_NETFILTER_NETLINK=m
CONFIG_NETFILTER_NETLINK_QUEUE=m
CONFIG_NETFILTER_NETLINK_LOG=m
#
# IP: Netfilter Configuration
#
CONFIG_IP_NF_CONNTRACK=m
# CONFIG_IP_NF_CT_ACCT is not set
# CONFIG_IP_NF_CONNTRACK_MARK is not set
# CONFIG_IP_NF_CONNTRACK_EVENTS is not set
# CONFIG_IP_NF_CONNTRACK_NETLINK is not set
# CONFIG_IP_NF_CT_PROTO_SCTP is not set
CONFIG_IP_NF_FTP=m
# CONFIG_IP_NF_IRC is not set
# CONFIG_IP_NF_NETBIOS_NS is not set
# CONFIG_IP_NF_TFTP is not set
# CONFIG_IP_NF_AMANDA is not set
# CONFIG_IP_NF_PPTP is not set
# CONFIG_IP_NF_QUEUE is not set
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_LIMIT=m
CONFIG_IP_NF_MATCH_IPRANGE=m
CONFIG_IP_NF_MATCH_MAC=m
CONFIG_IP_NF_MATCH_PKTTYPE=m
CONFIG_IP_NF_MATCH_MARK=m
CONFIG_IP_NF_MATCH_MULTIPORT=m
CONFIG_IP_NF_MATCH_TOS=m
CONFIG_IP_NF_MATCH_RECENT=m
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_DSCP=m
CONFIG_IP_NF_MATCH_AH_ESP=m
CONFIG_IP_NF_MATCH_LENGTH=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_MATCH_TCPMSS=m
CONFIG_IP_NF_MATCH_HELPER=m
CONFIG_IP_NF_MATCH_STATE=m
CONFIG_IP_NF_MATCH_CONNTRACK=m
CONFIG_IP_NF_MATCH_OWNER=m
CONFIG_IP_NF_MATCH_ADDRTYPE=m
CONFIG_IP_NF_MATCH_REALM=m
# CONFIG_IP_NF_MATCH_SCTP is not set
# CONFIG_IP_NF_MATCH_DCCP is not set
CONFIG_IP_NF_MATCH_COMMENT=m
CONFIG_IP_NF_MATCH_HASHLIMIT=m
CONFIG_IP_NF_MATCH_STRING=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_LOG=m
# CONFIG_IP_NF_TARGET_ULOG is not set
CONFIG_IP_NF_TARGET_TCPMSS=m
CONFIG_IP_NF_TARGET_NFQUEUE=m
# CONFIG_IP_NF_NAT is not set
# CONFIG_IP_NF_MANGLE is not set
# CONFIG_IP_NF_RAW is not set
# CONFIG_IP_NF_ARPTABLES is not set
#
# IPv6: Netfilter Configuration (EXPERIMENTAL)
#
# CONFIG_IP6_NF_QUEUE is not set
# CONFIG_IP6_NF_IPTABLES is not set
# CONFIG_IP6_NF_TARGET_NFQUEUE is not set
#
# DCCP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_DCCP is not set
#
# SCTP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_SCTP is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
CONFIG_NET_CLS_ROUTE=y
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_IEEE80211 is not set
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_STANDALONE=y
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
# CONFIG_FW_LOADER is not set
# CONFIG_DEBUG_DRIVER is not set
#
# Connector - unified userspace <-> kernelspace linker
#
CONFIG_CONNECTOR=m
#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set
#
# Parallel port support
#
CONFIG_PARPORT=m
CONFIG_PARPORT_PC=m
# CONFIG_PARPORT_SERIAL is not set
# CONFIG_PARPORT_PC_FIFO is not set
# CONFIG_PARPORT_PC_SUPERIO is not set
# CONFIG_PARPORT_GSC is not set
# CONFIG_PARPORT_1284 is not set
#
# Plug and Play support
#
CONFIG_PNP=y
# CONFIG_PNP_DEBUG is not set
#
# Protocols
#
CONFIG_PNPACPI=y
#
# Block devices
#
# CONFIG_BLK_DEV_FD is not set
# CONFIG_PARIDE is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=m
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
# CONFIG_BLK_DEV_RAM is not set
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=8
CONFIG_CDROM_PKTCDVD_WCACHE=y
# CONFIG_ATA_OVER_ETH is not set
#
# ATA/ATAPI/MFM/RLL support
#
CONFIG_IDE=m
CONFIG_BLK_DEV_IDE=m
#
# Please see Documentation/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_IDE_SATA is not set
# CONFIG_BLK_DEV_HD_IDE is not set
CONFIG_BLK_DEV_IDEDISK=m
# CONFIG_IDEDISK_MULTI_MODE is not set
CONFIG_BLK_DEV_IDECD=m
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not set
# CONFIG_BLK_DEV_IDESCSI is not set
# CONFIG_IDE_TASK_IOCTL is not set
#
# IDE chipset support/bugfixes
#
CONFIG_IDE_GENERIC=m
# CONFIG_BLK_DEV_CMD640 is not set
# CONFIG_BLK_DEV_IDEPNP is not set
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_SHARE_IRQ=y
# CONFIG_BLK_DEV_OFFBOARD is not set
CONFIG_BLK_DEV_GENERIC=m
# CONFIG_BLK_DEV_OPTI621 is not set
# CONFIG_BLK_DEV_RZ1000 is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
CONFIG_IDEDMA_PCI_AUTO=y
# CONFIG_IDEDMA_ONLYDISK is not set
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
# CONFIG_BLK_DEV_ATIIXP is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_TRIFLEX is not set
# CONFIG_BLK_DEV_CY82C693 is not set
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_CS5535 is not set
# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_SC1200 is not set
CONFIG_BLK_DEV_PIIX=m
# CONFIG_BLK_DEV_IT821X is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIIMAGE is not set
# CONFIG_BLK_DEV_SIS5513 is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
# CONFIG_IDE_ARM is not set
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_IVB is not set
CONFIG_IDEDMA_AUTO=y
# CONFIG_BLK_DEV_HD is not set
#
# SCSI device support
#
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
# CONFIG_BLK_DEV_SR is not set
# CONFIG_CHR_DEV_SG is not set
# CONFIG_CHR_DEV_SCH is not set
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
#
# SCSI Transport Attributes
#
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_ATTRS is not set
#
# SCSI Transport Layers
#
# CONFIG_SAS_CLASS is not set
#
# SCSI low-level drivers
#
# CONFIG_ISCSI_TCP is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
CONFIG_SCSI_SATA=y
# CONFIG_SCSI_SATA_AHCI is not set
# CONFIG_SCSI_PATA_AMD is not set
# CONFIG_SCSI_SATA_SVW is not set
# CONFIG_SCSI_PATA_TRIFLEX is not set
CONFIG_SCSI_ATA_PIIX=y
# CONFIG_SCSI_SATA_MV is not set
# CONFIG_SCSI_SATA_NV is not set
# CONFIG_SCSI_PATA_OPTI is not set
# CONFIG_SCSI_PDC_ADMA is not set
# CONFIG_SCSI_SATA_QSTOR is not set
# CONFIG_SCSI_PATA_PDC2027X is not set
# CONFIG_SCSI_SATA_PROMISE is not set
# CONFIG_SCSI_SATA_SX4 is not set
# CONFIG_SCSI_SATA_SIL is not set
# CONFIG_SCSI_SATA_SIL24 is not set
# CONFIG_SCSI_PATA_SIL680 is not set
# CONFIG_SCSI_SATA_SIS is not set
# CONFIG_SCSI_SATA_ULI is not set
# CONFIG_SCSI_PATA_VIA is not set
# CONFIG_SCSI_SATA_VIA is not set
# CONFIG_SCSI_SATA_VITESSE is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_PPA is not set
# CONFIG_SCSI_IMM is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_QLOGIC_FC is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
CONFIG_SCSI_QLA2XXX=y
# CONFIG_SCSI_QLA21XX is not set
# CONFIG_SCSI_QLA22XX is not set
# CONFIG_SCSI_QLA2300 is not set
# CONFIG_SCSI_QLA2322 is not set
# CONFIG_SCSI_QLA6312 is not set
# CONFIG_SCSI_QLA24XX is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
#
# Multi-device support (RAID and LVM)
#
# CONFIG_MD is not set
#
# Fusion MPT device support
#
# CONFIG_FUSION is not set
# CONFIG_FUSION_SPI is not set
# CONFIG_FUSION_FC is not set
# CONFIG_FUSION_SAS is not set
#
# IEEE 1394 (FireWire) support
#
# CONFIG_IEEE1394 is not set
#
# I2O device support
#
# CONFIG_I2O is not set
#
# Network device support
#
CONFIG_NETDEVICES=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
CONFIG_TUN=m
# CONFIG_NET_SB1000 is not set
#
# ARCnet devices
#
# CONFIG_ARCNET is not set
#
# PHY device support
#
#
# Ethernet (10 or 100Mbit)
#
# CONFIG_NET_ETHERNET is not set
#
# Ethernet (1000 Mbit)
#
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
CONFIG_SK98LIN=m
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
#
# Ethernet (10000 Mbit)
#
# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
#
# Token Ring devices
#
# CONFIG_TR is not set
#
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set
#
# Wan interfaces
#
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PLIP is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_KGDBOE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NETPOLL_RX is not set
# CONFIG_NETPOLL_TRAP is not set
# CONFIG_NET_POLL_CONTROLLER is not set
#
# ISDN subsystem
#
# CONFIG_ISDN is not set
#
# Telephony Support
#
# CONFIG_PHONE is not set
#
# Input device support
#
CONFIG_INPUT=y
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_TSDEV is not set
CONFIG_INPUT_EVDEV=m
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=m
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
# CONFIG_SERIO_SERPORT is not set
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PARKBD is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_GAMEPORT is not set
#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
# Serial drivers
#
CONFIG_SERIAL_8250=m
# CONFIG_SERIAL_8250_ACPI is not set
CONFIG_SERIAL_8250_NR_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set
#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=m
# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
# CONFIG_PRINTER is not set
# CONFIG_PPDEV is not set
# CONFIG_TIPAR is not set
#
# IPMI
#
# CONFIG_IPMI_HANDLER is not set
#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
CONFIG_HW_RANDOM=m
CONFIG_NVRAM=m
CONFIG_RTC=m
CONFIG_GEN_RTC=m
CONFIG_GEN_RTC_X=y
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_SONYPI is not set
#
# Ftape, the floppy tape device driver
#
CONFIG_AGP=m
# CONFIG_AGP_ALI is not set
# CONFIG_AGP_ATI is not set
# CONFIG_AGP_AMD is not set
# CONFIG_AGP_AMD64 is not set
CONFIG_AGP_INTEL=m
# CONFIG_AGP_NVIDIA is not set
# CONFIG_AGP_SIS is not set
# CONFIG_AGP_SWORKS is not set
# CONFIG_AGP_VIA is not set
# CONFIG_AGP_EFFICEON is not set
# CONFIG_DRM is not set
# CONFIG_MWAVE is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_HPET is not set
# CONFIG_HANGCHECK_TIMER is not set
#
# TPM devices
#
# CONFIG_TCG_TPM is not set
# CONFIG_TELCLOCK is not set
#
# I2C support
#
CONFIG_I2C=y
# CONFIG_I2C_CHARDEV is not set
#
# I2C Algorithms
#
CONFIG_I2C_ALGOBIT=y
# CONFIG_I2C_ALGOPCF is not set
# CONFIG_I2C_ALGOPCA is not set
#
# I2C Hardware Bus support
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_I801 is not set
# CONFIG_I2C_I810 is not set
# CONFIG_I2C_PIIX4 is not set
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_PARPORT is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_PROSAVAGE is not set
# CONFIG_I2C_SAVAGE4 is not set
# CONFIG_SCx200_ACB is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_STUB is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
# CONFIG_I2C_VOODOO3 is not set
# CONFIG_I2C_PCA_ISA is not set
#
# Miscellaneous I2C Chip support
#
# CONFIG_SENSORS_DS1337 is not set
# CONFIG_SENSORS_DS1374 is not set
# CONFIG_SENSORS_EEPROM is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_RTC8564 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_RTC_X1205_I2C is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
#
# Dallas's 1-wire bus
#
# CONFIG_W1 is not set
#
# Hardware Monitoring support
#
# CONFIG_HWMON is not set
# CONFIG_HWMON_VID is not set
#
# Misc devices
#
# CONFIG_IBM_ASM is not set
#
# Multimedia Capabilities Port drivers
#
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
#
# Digital Video Broadcasting Devices
#
# CONFIG_DVB is not set
#
# Graphics support
#
CONFIG_FB=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_MACMODES is not set
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ARC is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_VGA16 is not set
# CONFIG_FB_VESA is not set
CONFIG_VIDEO_SELECT=y
# CONFIG_FB_HGA is not set
# CONFIG_FB_S1D13XXX is not set
CONFIG_FB_NVIDIA=y
CONFIG_FB_NVIDIA_I2C=y
# CONFIG_FB_RIVA is not set
# CONFIG_FB_I810 is not set
# CONFIG_FB_INTEL is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON_OLD is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_CYBLA is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_GEODE is not set
# CONFIG_FB_VIRTUAL is not set
#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
#
# Logo configuration
#
# CONFIG_LOGO is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_BACKLIGHT_CLASS_DEVICE=m
CONFIG_BACKLIGHT_DEVICE=y
CONFIG_LCD_CLASS_DEVICE=m
CONFIG_LCD_DEVICE=y
#
# Speakup console speech
#
# CONFIG_SPEAKUP is not set
#
# Sound
#
CONFIG_SOUND=m
#
# Advanced Linux Sound Architecture
#
CONFIG_SND=m
CONFIG_SND_AC97_CODEC=m
CONFIG_SND_AC97_BUS=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
CONFIG_SND_RAWMIDI=m
CONFIG_SND_SEQUENCER=m
CONFIG_SND_SEQ_DUMMY=m
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
CONFIG_SND_SEQUENCER_OSS=y
CONFIG_SND_RTCTIMER=m
CONFIG_SND_SEQ_RTCTIMER_DEFAULT=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
CONFIG_SND_GENERIC_DRIVER=y
#
# Generic devices
#
CONFIG_SND_DUMMY=m
CONFIG_SND_VIRMIDI=m
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set
#
# PCI devices
#
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_EMU10K1X is not set
# CONFIG_SND_CA0106 is not set
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_HDSPM is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_YMFPCI is not set
# CONFIG_SND_AD1889 is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_CS5535AUDIO is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_FM801 is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
CONFIG_SND_INTEL8X0=m
# CONFIG_SND_INTEL8X0M is not set
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VX222 is not set
# CONFIG_SND_HDA_INTEL is not set
#
# USB devices
#
# CONFIG_SND_USB_AUDIO is not set
# CONFIG_SND_USB_USX2Y is not set
#
# Open Sound System
#
# CONFIG_SOUND_PRIME is not set
#
# USB support
#
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB=m
# CONFIG_USB_DEBUG is not set
#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_BANDWIDTH is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_SUSPEND is not set
# CONFIG_USB_OTG is not set
#
# USB Host Controller Drivers
#
CONFIG_USB_EHCI_HCD=m
# CONFIG_USB_EHCI_SPLIT_ISO is not set
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_OHCI_HCD is not set
CONFIG_USB_UHCI_HCD=m
# CONFIG_USB_SL811_HCD is not set
#
# USB Device Class drivers
#
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
#
# may also be needed; see USB_STORAGE Help for more information
#
# CONFIG_USB_STORAGE is not set
# CONFIG_USB_LIBUSUAL is not set
#
# USB Input Devices
#
# CONFIG_USB_HID is not set
#
# USB HID Boot Protocol drivers
#
# CONFIG_USB_KBD is not set
# CONFIG_USB_MOUSE is not set
# CONFIG_USB_AIPTEK is not set
# CONFIG_USB_WACOM is not set
# CONFIG_USB_ACECAD is not set
# CONFIG_USB_KBTAB is not set
# CONFIG_USB_POWERMATE is not set
# CONFIG_USB_MTOUCH is not set
# CONFIG_USB_ITMTOUCH is not set
# CONFIG_USB_EGALAX is not set
# CONFIG_USB_YEALINK is not set
# CONFIG_USB_XPAD is not set
# CONFIG_USB_ATI_REMOTE is not set
# CONFIG_USB_KEYSPAN_REMOTE is not set
# CONFIG_USB_APPLETOUCH is not set
#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
#
# USB Multimedia devices
#
# CONFIG_USB_DABUSB is not set
#
# Video4Linux support is needed for USB Multimedia device support
#
#
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set
# CONFIG_USB_MON is not set
#
# USB port drivers
#
# CONFIG_USB_USS720 is not set
#
# USB Serial Converter support
#
# CONFIG_USB_SERIAL is not set
#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_GOTEMP is not set
# CONFIG_USB_PHIDGETKIT is not set
# CONFIG_USB_PHIDGETSERVO is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TEST is not set
#
# USB DSL modem support
#
#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
#
# MMC/SD Card support
#
# CONFIG_MMC is not set
#
# InfiniBand support
#
# CONFIG_INFINIBAND is not set
#
# SN Devices
#
#
# EDAC - error detection and reporting (RAS)
#
# CONFIG_EDAC is not set
#
# Distributed Lock Manager
#
# CONFIG_DLM is not set
#
# File systems
#
CONFIG_EXT2_FS=m
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
CONFIG_EXT2_FS_XIP=y
CONFIG_FS_XIP=y
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
CONFIG_REISER4_FS=m
# CONFIG_REISER4_DEBUG is not set
CONFIG_REISERFS_FS=m
# CONFIG_REISERFS_CHECK is not set
CONFIG_REISERFS_PROC_INFO=y
CONFIG_REISERFS_FS_XATTR=y
CONFIG_REISERFS_FS_POSIX_ACL=y
CONFIG_REISERFS_FS_SECURITY=y
CONFIG_JFS_FS=m
CONFIG_JFS_POSIX_ACL=y
CONFIG_JFS_SECURITY=y
# CONFIG_JFS_DEBUG is not set
CONFIG_JFS_STATISTICS=y
CONFIG_FS_POSIX_ACL=y
CONFIG_XFS_FS=m
CONFIG_XFS_QUOTA=y
CONFIG_XFS_SECURITY=y
CONFIG_XFS_POSIX_ACL=y
# CONFIG_XFS_RT is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
CONFIG_QUOTA=y
# CONFIG_QFMT_V1 is not set
CONFIG_QFMT_V2=m
CONFIG_QUOTACTL=y
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
CONFIG_AUTOFS4_FS=m
CONFIG_FUSE_FS=m
#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_ZISOFS_FS=m
CONFIG_UDF_FS=m
CONFIG_UDF_NLS=y
#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
CONFIG_NTFS_FS=m
# CONFIG_NTFS_DEBUG is not set
CONFIG_NTFS_RW=y
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
# CONFIG_PROC_KCORE is not set
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
CONFIG_RELAYFS_FS=y
CONFIG_CONFIGFS_FS=m
#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_ASFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
#
# Network File Systems
#
# CONFIG_NFS_FS is not set
# CONFIG_NFSD is not set
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
# CONFIG_9P_FS is not set
#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
#
# Native Language Support
#
CONFIG_NLS=m
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=m
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
CONFIG_NLS_CODEPAGE_852=m
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
CONFIG_NLS_CODEPAGE_1250=m
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=m
CONFIG_NLS_ISO8859_2=m
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=m
#
# Instrumentation Support
#
CONFIG_PROFILING=y
CONFIG_OPROFILE=m
CONFIG_KPROBES=y
#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
CONFIG_DEBUG_KERNEL=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_LOG_BUF_SHIFT=20
CONFIG_DETECT_SOFTLOCKUP=y
CONFIG_SCHEDSTATS=y
CONFIG_DEBUG_SLAB=y
CONFIG_DEBUG_PREEMPT=y
CONFIG_DEBUG_SPINLOCK=y
CONFIG_DEBUG_SPINLOCK_SLEEP=y
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_HIGHMEM=y
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_INFO=y
CONFIG_PAGE_OWNER=y
CONFIG_DEBUG_FS=y
CONFIG_DEBUG_VM=y
CONFIG_FRAME_POINTER=y
CONFIG_RCU_TORTURE_TEST=m
CONFIG_EARLY_PRINTK=y
CONFIG_DEBUG_STACKOVERFLOW=y
CONFIG_DEBUG_STACK_USAGE=y
CONFIG_DEBUG_PAGEALLOC=y
# CONFIG_DEBUG_RODATA is not set
CONFIG_4KSTACKS=y
CONFIG_X86_FIND_SMP_CONFIG=y
CONFIG_X86_MPPARSE=y
#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
#
# Cryptographic options
#
# CONFIG_CRYPTO is not set
#
# Hardware crypto devices
#
#
# Library routines
#
CONFIG_CRC_CCITT=m
CONFIG_CRC16=m
CONFIG_CRC32=y
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=m
CONFIG_ZLIB_DEFLATE=m
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=m
CONFIG_TEXTSEARCH_BM=m
CONFIG_TEXTSEARCH_FSM=m
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_PENDING_IRQ=y
CONFIG_X86_SMP=y
CONFIG_X86_HT=y
CONFIG_X86_BIOS_REBOOT=y
CONFIG_X86_TRAMPOLINE=y
OOPS Reporting Tool v.b6
http://www.wsi.edu.pl/~piotrowskim/
/files/ort/beta/
Regards,
Michal Piotrowski
From: Andrew Morton <[email protected]>
Date: Wed, Nov 23, 2005 at 03:35:50AM -0800
>
> ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.15-rc2/2.6.15-rc2-mm1/
>
This one oopses at boot, where 2.6.15-rc1-mm2 works fine with the same
.config.
Hand-written dmesg excerpt:
init 2.86 booting
Problem when loading /etc/sonsole/boottime.kmap.gz, use install-keymap
Kernel bug in list.h:166
backtrace:
free_block
drain_array_locked
cache_reap
worker_thread
cache_reap
default_wake_function
kthread
kthread
kernel_thread_helper
Setting parameters of disc: (none).
Activating swap...
[and here it hangs].
ver_linux:
If some fields are empty or look unusual you may have an old version.
Compare to the current minimal requirements in Documentation/Changes.
Linux adsl-gate 2.6.15-rc1-mm2 #1 SMP Sat Nov 19 20:24:26 CET 2005 i686 GNU/Linux
Gnu C 4.0.3
Gnu make 3.80
binutils 2.16.91
util-linux 2.12p
mount 2.12p
module-init-tools 3.2-pre9
e2fsprogs 1.38
reiserfsprogs 3.6.19
reiser4progs 1.0.5
nfs-utils 1.0.7
Linux C Library 2.3.5
Dynamic linker (ldd) 2.3.5
Procps 3.2.6
Net-tools 1.60
Console-tools 0.2.3
Sh-utils 5.93
Modules Loaded ip_nat_ftp ip_nat_irc ip_conntrack_irc ip_conntrack_ftp ipt_MASQUERADE iptable_nat ip_nat ipt_REJECT ipt_LOG ipt_limit ipt_state iptable_filter i2c_viapro w83781d hwmon_vid via686a i2c_isa
.config:
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.15-rc2-mm1
# Wed Nov 23 14:57:50 2005
#
CONFIG_X86_32=y
CONFIG_SEMAPHORE_SLEEPERS=y
CONFIG_X86=y
CONFIG_MMU=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
# CONFIG_CLEAN_COMPILE is not set
CONFIG_BROKEN=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
#
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SWAP_PREFETCH=y
CONFIG_SYSVIPC=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
# CONFIG_CPUSETS is not set
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_DOUBLEFAULT=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
CONFIG_CC_ALIGN_FUNCTIONS=0
CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
CONFIG_SLAB=y
CONFIG_SERIAL_PCI=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_SLOB is not set
#
# Loadable module support
#
CONFIG_MODULES=y
# CONFIG_MODULE_UNLOAD is not set
CONFIG_OBSOLETE_MODPARM=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y
#
# Block layer
#
CONFIG_LBD=y
# CONFIG_BLK_DEV_IO_TRACE is not set
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_DEFAULT_AS is not set
CONFIG_DEFAULT_DEADLINE=y
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="deadline"
#
# Processor type and features
#
CONFIG_X86_PC=y
# CONFIG_X86_ELAN is not set
# CONFIG_X86_VOYAGER is not set
# CONFIG_X86_NUMAQ is not set
# CONFIG_X86_SUMMIT is not set
# CONFIG_X86_BIGSMP is not set
# CONFIG_X86_VISWS is not set
# CONFIG_X86_GENERICARCH is not set
# CONFIG_X86_ES7000 is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
CONFIG_MPENTIUM4=y
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP2 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MGEODEGX1 is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_X86_GENERIC is not set
CONFIG_X86_CMPXCHG=y
CONFIG_X86_XADD=y
CONFIG_X86_L1_CACHE_SHIFT=7
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_X86_CMPXCHG64=y
CONFIG_X86_GOOD_APIC=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_X86_TSC=y
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
CONFIG_SMP=y
CONFIG_NR_CPUS=2
CONFIG_SCHED_SMT=y
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_PREEMPT_BKL=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_MCE=y
# CONFIG_X86_MCE_NONFATAL is not set
CONFIG_X86_MCE_P4THERMAL=y
# CONFIG_TOSHIBA is not set
# CONFIG_I8K is not set
# CONFIG_X86_REBOOTFIXUPS is not set
# CONFIG_MICROCODE is not set
# CONFIG_X86_MSR is not set
# CONFIG_X86_CPUID is not set
#
# Firmware Drivers
#
# CONFIG_EDD is not set
CONFIG_DELL_RBU=m
# CONFIG_DCDBAS is not set
# CONFIG_NOHIGHMEM is not set
CONFIG_HIGHMEM4G=y
# CONFIG_HIGHMEM64G is not set
CONFIG_HIGHMEM=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_SPARSEMEM_STATIC=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_HIGHPTE=y
# CONFIG_MATH_EMULATION is not set
CONFIG_MTRR=y
# CONFIG_EFI is not set
CONFIG_IRQBALANCE=y
CONFIG_REGPARM=y
CONFIG_SECCOMP=y
CONFIG_HZ_100=y
# CONFIG_HZ_250 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=100
CONFIG_PHYSICAL_START=0x100000
# CONFIG_KEXEC is not set
#
# Power management options (ACPI, APM)
#
CONFIG_PM=y
CONFIG_PM_LEGACY=y
# CONFIG_PM_DEBUG is not set
#
# ACPI (Advanced Configuration and Power Interface) Support
#
CONFIG_ACPI=y
# CONFIG_ACPI_AC is not set
# CONFIG_ACPI_BATTERY is not set
CONFIG_ACPI_BUTTON=y
# CONFIG_ACPI_VIDEO is not set
CONFIG_ACPI_HOTKEY=m
CONFIG_ACPI_FAN=y
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_THERMAL=y
# CONFIG_ACPI_ASUS is not set
# CONFIG_ACPI_IBM is not set
# CONFIG_ACPI_TOSHIBA is not set
# CONFIG_ACPI_CUSTOM_DSDT is not set
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_SYSTEM=y
# CONFIG_X86_PM_TIMER is not set
# CONFIG_ACPI_CONTAINER is not set
#
# APM (Advanced Power Management) BIOS Support
#
# CONFIG_APM is not set
#
# CPU Frequency scaling
#
# CONFIG_CPU_FREQ is not set
#
# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
#
CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GOMMCONFIG is not set
# CONFIG_PCI_GODIRECT is not set
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
# CONFIG_PCIEPORTBUS is not set
# CONFIG_PCI_MSI is not set
CONFIG_PCI_LEGACY_PROC=y
CONFIG_ISA_DMA_API=y
CONFIG_ISA=y
# CONFIG_EISA is not set
# CONFIG_MCA is not set
# CONFIG_SCx200 is not set
# CONFIG_HOTPLUG_CPU is not set
#
# PCCARD (PCMCIA/CardBus) support
#
# CONFIG_PCCARD is not set
#
# PCI Hotplug Support
#
# CONFIG_HOTPLUG_PCI is not set
#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_AOUT=y
CONFIG_BINFMT_MISC=y
#
# Networking
#
CONFIG_NET=y
#
# Networking options
#
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_ASK_IP_FIB_HASH=y
# CONFIG_IP_FIB_TRIE is not set
CONFIG_IP_FIB_HASH=y
# CONFIG_IP_MULTIPLE_TABLES is not set
# CONFIG_IP_ROUTE_MULTIPATH is not set
CONFIG_IP_ROUTE_VERBOSE=y
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_IP_MROUTE is not set
# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_TUNNEL is not set
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_BIC=y
#
# IP: Virtual Server Configuration
#
# CONFIG_IP_VS is not set
CONFIG_IPV6=y
# CONFIG_IPV6_PRIVACY is not set
# CONFIG_INET6_AH is not set
# CONFIG_INET6_ESP is not set
# CONFIG_INET6_IPCOMP is not set
# CONFIG_INET6_TUNNEL is not set
# CONFIG_IPV6_TUNNEL is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
#
# Core Netfilter Configuration
#
# CONFIG_NETFILTER_NETLINK is not set
#
# IP: Netfilter Configuration
#
CONFIG_IP_NF_CONNTRACK=y
# CONFIG_IP_NF_CT_ACCT is not set
CONFIG_IP_NF_CONNTRACK_MARK=y
# CONFIG_IP_NF_CONNTRACK_EVENTS is not set
CONFIG_IP_NF_CT_PROTO_SCTP=m
CONFIG_IP_NF_FTP=m
CONFIG_IP_NF_IRC=m
CONFIG_IP_NF_NETBIOS_NS=m
CONFIG_IP_NF_TFTP=m
CONFIG_IP_NF_AMANDA=m
# CONFIG_IP_NF_PPTP is not set
CONFIG_IP_NF_QUEUE=y
CONFIG_IP_NF_IPTABLES=y
CONFIG_IP_NF_MATCH_LIMIT=m
CONFIG_IP_NF_MATCH_IPRANGE=m
CONFIG_IP_NF_MATCH_MAC=m
CONFIG_IP_NF_MATCH_PKTTYPE=m
CONFIG_IP_NF_MATCH_MARK=m
CONFIG_IP_NF_MATCH_MULTIPORT=m
CONFIG_IP_NF_MATCH_TOS=m
CONFIG_IP_NF_MATCH_RECENT=m
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_DSCP=m
CONFIG_IP_NF_MATCH_AH_ESP=m
CONFIG_IP_NF_MATCH_LENGTH=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_MATCH_TCPMSS=m
CONFIG_IP_NF_MATCH_HELPER=m
CONFIG_IP_NF_MATCH_STATE=m
CONFIG_IP_NF_MATCH_CONNTRACK=m
CONFIG_IP_NF_MATCH_OWNER=m
CONFIG_IP_NF_MATCH_ADDRTYPE=m
CONFIG_IP_NF_MATCH_REALM=m
CONFIG_IP_NF_MATCH_SCTP=m
CONFIG_IP_NF_MATCH_DCCP=m
CONFIG_IP_NF_MATCH_COMMENT=m
CONFIG_IP_NF_MATCH_CONNMARK=m
CONFIG_IP_NF_MATCH_HASHLIMIT=m
CONFIG_IP_NF_MATCH_STRING=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_IP_NF_TARGET_TCPMSS=m
CONFIG_IP_NF_TARGET_NFQUEUE=m
CONFIG_IP_NF_NAT=m
CONFIG_IP_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_IP_NF_TARGET_NETMAP=m
CONFIG_IP_NF_TARGET_SAME=m
CONFIG_IP_NF_NAT_SNMP_BASIC=m
CONFIG_IP_NF_NAT_IRC=m
CONFIG_IP_NF_NAT_FTP=m
CONFIG_IP_NF_NAT_TFTP=m
CONFIG_IP_NF_NAT_AMANDA=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_TOS=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_DSCP=m
CONFIG_IP_NF_TARGET_MARK=m
CONFIG_IP_NF_TARGET_CLASSIFY=m
CONFIG_IP_NF_TARGET_TTL=m
CONFIG_IP_NF_TARGET_CONNMARK=m
CONFIG_IP_NF_TARGET_CLUSTERIP=m
CONFIG_IP_NF_RAW=m
CONFIG_IP_NF_TARGET_NOTRACK=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
#
# IPv6: Netfilter Configuration (EXPERIMENTAL)
#
# CONFIG_IP6_NF_QUEUE is not set
CONFIG_IP6_NF_IPTABLES=y
CONFIG_IP6_NF_MATCH_LIMIT=y
CONFIG_IP6_NF_MATCH_MAC=y
CONFIG_IP6_NF_MATCH_RT=y
CONFIG_IP6_NF_MATCH_OPTS=y
CONFIG_IP6_NF_MATCH_FRAG=y
CONFIG_IP6_NF_MATCH_HL=y
CONFIG_IP6_NF_MATCH_MULTIPORT=y
CONFIG_IP6_NF_MATCH_OWNER=y
CONFIG_IP6_NF_MATCH_MARK=y
CONFIG_IP6_NF_MATCH_IPV6HEADER=y
CONFIG_IP6_NF_MATCH_AHESP=y
CONFIG_IP6_NF_MATCH_LENGTH=y
CONFIG_IP6_NF_MATCH_EUI64=y
CONFIG_IP6_NF_FILTER=y
CONFIG_IP6_NF_TARGET_LOG=y
CONFIG_IP6_NF_TARGET_REJECT=y
CONFIG_IP6_NF_TARGET_NFQUEUE=m
CONFIG_IP6_NF_MANGLE=y
CONFIG_IP6_NF_TARGET_MARK=y
CONFIG_IP6_NF_TARGET_HL=y
CONFIG_IP6_NF_RAW=y
#
# DCCP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_DCCP is not set
#
# SCTP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_SCTP is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
#
# QoS and/or fair queueing
#
CONFIG_NET_SCHED=y
CONFIG_NET_SCH_CLK_JIFFIES=y
# CONFIG_NET_SCH_CLK_GETTIMEOFDAY is not set
# CONFIG_NET_SCH_CLK_CPU is not set
#
# Queueing/Scheduling
#
CONFIG_NET_SCH_CBQ=m
CONFIG_NET_SCH_HTB=m
# CONFIG_NET_SCH_HFSC is not set
CONFIG_NET_SCH_PRIO=m
CONFIG_NET_SCH_RED=m
CONFIG_NET_SCH_SFQ=m
CONFIG_NET_SCH_TEQL=m
CONFIG_NET_SCH_TBF=m
CONFIG_NET_SCH_GRED=m
CONFIG_NET_SCH_DSMARK=m
# CONFIG_NET_SCH_NETEM is not set
CONFIG_NET_SCH_INGRESS=m
#
# Classification
#
CONFIG_NET_CLS=y
CONFIG_NET_CLS_BASIC=y
CONFIG_NET_CLS_TCINDEX=m
CONFIG_NET_CLS_ROUTE4=m
CONFIG_NET_CLS_ROUTE=y
CONFIG_NET_CLS_FW=m
CONFIG_NET_CLS_U32=m
# CONFIG_CLS_U32_PERF is not set
# CONFIG_CLS_U32_MARK is not set
CONFIG_NET_CLS_RSVP=m
CONFIG_NET_CLS_RSVP6=m
CONFIG_NET_EMATCH=y
CONFIG_NET_EMATCH_STACK=32
CONFIG_NET_EMATCH_CMP=y
CONFIG_NET_EMATCH_NBYTE=y
CONFIG_NET_EMATCH_U32=y
CONFIG_NET_EMATCH_META=y
# CONFIG_NET_EMATCH_TEXT is not set
# CONFIG_NET_CLS_ACT is not set
CONFIG_NET_CLS_POLICE=y
# CONFIG_NET_CLS_IND is not set
CONFIG_NET_ESTIMATOR=y
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_IEEE80211 is not set
#
# Device Drivers
#
#
# Generic Driver Options
#
# CONFIG_STANDALONE is not set
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=m
#
# Connector - unified userspace <-> kernelspace linker
#
# CONFIG_CONNECTOR is not set
#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set
#
# Parallel port support
#
CONFIG_PARPORT=y
CONFIG_PARPORT_PC=y
# CONFIG_PARPORT_SERIAL is not set
# CONFIG_PARPORT_PC_FIFO is not set
# CONFIG_PARPORT_PC_SUPERIO is not set
# CONFIG_PARPORT_GSC is not set
CONFIG_PARPORT_1284=y
#
# Plug and Play support
#
# CONFIG_PNP is not set
#
# Block devices
#
CONFIG_BLK_DEV_FD=y
# CONFIG_BLK_DEV_XD is not set
# CONFIG_PARIDE is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
# CONFIG_BLK_DEV_RAM is not set
CONFIG_BLK_DEV_RAM_COUNT=16
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
#
# ATA/ATAPI/MFM/RLL support
#
CONFIG_IDE=y
CONFIG_BLK_DEV_IDE=y
#
# Please see Documentation/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_IDE_SATA is not set
# CONFIG_BLK_DEV_HD_IDE is not set
CONFIG_BLK_DEV_IDEDISK=y
CONFIG_IDEDISK_MULTI_MODE=y
CONFIG_BLK_DEV_IDECD=y
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not set
# CONFIG_BLK_DEV_IDESCSI is not set
# CONFIG_IDE_TASK_IOCTL is not set
#
# IDE chipset support/bugfixes
#
CONFIG_IDE_GENERIC=y
# CONFIG_BLK_DEV_CMD640 is not set
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_SHARE_IRQ=y
# CONFIG_BLK_DEV_OFFBOARD is not set
CONFIG_BLK_DEV_GENERIC=y
# CONFIG_BLK_DEV_OPTI621 is not set
# CONFIG_BLK_DEV_RZ1000 is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
CONFIG_IDEDMA_PCI_AUTO=y
# CONFIG_IDEDMA_ONLYDISK is not set
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
# CONFIG_BLK_DEV_ATIIXP is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_TRIFLEX is not set
# CONFIG_BLK_DEV_CY82C693 is not set
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_CS5535 is not set
# CONFIG_BLK_DEV_HPT34X is not set
CONFIG_BLK_DEV_HPT366=y
# CONFIG_BLK_DEV_SC1200 is not set
CONFIG_BLK_DEV_PIIX=y
# CONFIG_BLK_DEV_IT821X is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
CONFIG_BLK_DEV_PDC202XX_NEW=y
# CONFIG_PDC202XX_FORCE is not set
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIIMAGE is not set
# CONFIG_BLK_DEV_SIS5513 is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
CONFIG_BLK_DEV_VIA82CXXX=y
# CONFIG_IDE_ARM is not set
# CONFIG_IDE_CHIPSETS is not set
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_IVB is not set
CONFIG_IDEDMA_AUTO=y
# CONFIG_BLK_DEV_HD is not set
#
# SCSI device support
#
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
# CONFIG_SCSI_PROC_FS is not set
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=y
# CONFIG_BLK_DEV_SR_VENDOR is not set
CONFIG_CHR_DEV_SG=y
# CONFIG_CHR_DEV_SCH is not set
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
#
# SCSI Transport Attributes
#
CONFIG_SCSI_SPI_ATTRS=y
CONFIG_SCSI_FC_ATTRS=y
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_ATTRS is not set
#
# SCSI Transport Layers
#
# CONFIG_SAS_CLASS is not set
#
# SCSI low-level drivers
#
# CONFIG_ISCSI_TCP is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_7000FASST is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AHA152X is not set
# CONFIG_SCSI_AHA1542 is not set
# CONFIG_SCSI_AACRAID is not set
CONFIG_SCSI_AIC7XXX=y
CONFIG_AIC7XXX_CMDS_PER_DEVICE=32
CONFIG_AIC7XXX_RESET_DELAY_MS=15000
CONFIG_AIC7XXX_DEBUG_ENABLE=y
CONFIG_AIC7XXX_DEBUG_MASK=0
CONFIG_AIC7XXX_REG_PRETTY_PRINT=y
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_IN2000 is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_SATA is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_DTC3280 is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_EATA_PIO is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_GENERIC_NCR5380 is not set
# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_PPA is not set
# CONFIG_SCSI_IMM is not set
# CONFIG_SCSI_NCR53C406A is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_PAS16 is not set
# CONFIG_SCSI_PSI240I is not set
# CONFIG_SCSI_QLOGIC_FAS is not set
# CONFIG_SCSI_QLOGIC_FC is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
CONFIG_SCSI_QLA2XXX=y
# CONFIG_SCSI_QLA21XX is not set
# CONFIG_SCSI_QLA22XX is not set
# CONFIG_SCSI_QLA2300 is not set
# CONFIG_SCSI_QLA2322 is not set
# CONFIG_SCSI_QLA6312 is not set
# CONFIG_SCSI_QLA24XX is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_SEAGATE is not set
# CONFIG_SCSI_SYM53C416 is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_T128 is not set
# CONFIG_SCSI_U14_34F is not set
# CONFIG_SCSI_ULTRASTOR is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
#
# Old CD-ROM drivers (not SCSI, not IDE)
#
# CONFIG_CD_NO_IDESCSI is not set
#
# Multi-device support (RAID and LVM)
#
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
CONFIG_MD_LINEAR=y
CONFIG_MD_RAID0=y
CONFIG_MD_RAID1=y
# CONFIG_MD_RAID10 is not set
CONFIG_MD_RAID5=y
# CONFIG_MD_RAID6 is not set
# CONFIG_MD_MULTIPATH is not set
# CONFIG_MD_FAULTY is not set
# CONFIG_BLK_DEV_DM is not set
#
# Fusion MPT device support
#
# CONFIG_FUSION is not set
# CONFIG_FUSION_SPI is not set
# CONFIG_FUSION_FC is not set
# CONFIG_FUSION_SAS is not set
#
# IEEE 1394 (FireWire) support
#
# CONFIG_IEEE1394 is not set
#
# I2O device support
#
# CONFIG_I2O is not set
#
# Network device support
#
CONFIG_NETDEVICES=y
CONFIG_DUMMY=m
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
#
# ARCnet devices
#
# CONFIG_ARCNET is not set
#
# PHY device support
#
# CONFIG_PHYLIB is not set
#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_LANCE is not set
# CONFIG_NET_VENDOR_SMC is not set
# CONFIG_NET_VENDOR_RACAL is not set
#
# Tulip family network device support
#
CONFIG_NET_TULIP=y
# CONFIG_DE2104X is not set
CONFIG_TULIP=y
CONFIG_TULIP_MWI=y
CONFIG_TULIP_MMIO=y
# CONFIG_TULIP_NAPI is not set
# CONFIG_DE4X5 is not set
# CONFIG_WINBOND_840 is not set
# CONFIG_DM9102 is not set
# CONFIG_ULI526X is not set
# CONFIG_AT1700 is not set
# CONFIG_DEPCA is not set
# CONFIG_HP100 is not set
# CONFIG_NET_ISA is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_AC3200 is not set
# CONFIG_APRICOT is not set
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
# CONFIG_CS89x0 is not set
# CONFIG_DGRS is not set
# CONFIG_EEPRO100 is not set
# CONFIG_E100 is not set
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
# CONFIG_NE2K_PCI is not set
# CONFIG_8139CP is not set
# CONFIG_8139TOO is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_NET_POCKET is not set
#
# Ethernet (1000 Mbit)
#
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
CONFIG_E1000=y
CONFIG_E1000_NAPI=y
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
#
# Ethernet (10000 Mbit)
#
# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
#
# Token Ring devices
#
# CONFIG_TR is not set
#
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set
#
# Wan interfaces
#
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PLIP is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_KGDBOE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NETPOLL_RX is not set
# CONFIG_NETPOLL_TRAP is not set
# CONFIG_NET_POLL_CONTROLLER is not set
#
# ISDN subsystem
#
# CONFIG_ISDN is not set
#
# Telephony Support
#
# CONFIG_PHONE is not set
#
# Input device support
#
CONFIG_INPUT=y
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1600
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=1200
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_INPORT is not set
# CONFIG_MOUSE_LOGIBM is not set
# CONFIG_MOUSE_PC110PAD is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
# CONFIG_SERIO_SERPORT is not set
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PARKBD is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_GAMEPORT is not set
#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
# Serial drivers
#
CONFIG_SERIAL_8250=y
# CONFIG_SERIAL_8250_CONSOLE is not set
# CONFIG_SERIAL_8250_ACPI is not set
CONFIG_SERIAL_8250_NR_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set
#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
CONFIG_PRINTER=y
# CONFIG_LP_CONSOLE is not set
# CONFIG_PPDEV is not set
# CONFIG_TIPAR is not set
#
# IPMI
#
# CONFIG_IPMI_HANDLER is not set
#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_NVRAM is not set
CONFIG_RTC=y
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_SONYPI is not set
#
# Ftape, the floppy tape device driver
#
# CONFIG_FTAPE is not set
CONFIG_AGP=y
# CONFIG_AGP_ALI is not set
# CONFIG_AGP_ATI is not set
# CONFIG_AGP_AMD is not set
# CONFIG_AGP_AMD64 is not set
CONFIG_AGP_INTEL=y
# CONFIG_AGP_NVIDIA is not set
# CONFIG_AGP_SIS is not set
# CONFIG_AGP_SWORKS is not set
CONFIG_AGP_VIA=y
# CONFIG_AGP_EFFICEON is not set
CONFIG_DRM=y
# CONFIG_DRM_TDFX is not set
# CONFIG_DRM_R128 is not set
CONFIG_DRM_RADEON=y
# CONFIG_DRM_I810 is not set
# CONFIG_DRM_I830 is not set
# CONFIG_DRM_I915 is not set
CONFIG_DRM_MGA=y
# CONFIG_DRM_SIS is not set
# CONFIG_DRM_VIA is not set
# CONFIG_DRM_SAVAGE is not set
# CONFIG_MWAVE is not set
# CONFIG_RAW_DRIVER is not set
CONFIG_HPET=y
# CONFIG_HPET_RTC_IRQ is not set
CONFIG_HPET_MMAP=y
# CONFIG_HANGCHECK_TIMER is not set
#
# TPM devices
#
# CONFIG_TCG_TPM is not set
# CONFIG_TELCLOCK is not set
#
# I2C support
#
CONFIG_I2C=y
CONFIG_I2C_CHARDEV=y
#
# I2C Algorithms
#
CONFIG_I2C_ALGOBIT=y
# CONFIG_I2C_ALGOPCF is not set
# CONFIG_I2C_ALGOPCA is not set
#
# I2C Hardware Bus support
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_ELEKTOR is not set
# CONFIG_I2C_I801 is not set
# CONFIG_I2C_I810 is not set
CONFIG_I2C_PIIX4=m
CONFIG_I2C_ISA=m
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_PARPORT is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_PROSAVAGE is not set
# CONFIG_I2C_SAVAGE4 is not set
# CONFIG_SCx200_ACB is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_STUB is not set
CONFIG_I2C_VIA=m
CONFIG_I2C_VIAPRO=m
# CONFIG_I2C_VOODOO3 is not set
# CONFIG_I2C_PCA_ISA is not set
#
# Miscellaneous I2C Chip support
#
# CONFIG_SENSORS_DS1337 is not set
# CONFIG_SENSORS_DS1374 is not set
CONFIG_SENSORS_EEPROM=m
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_RTC8564 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_RTC_X1205_I2C is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
#
# Dallas's 1-wire bus
#
# CONFIG_W1 is not set
#
# Hardware Monitoring support
#
CONFIG_HWMON=y
CONFIG_HWMON_VID=m
CONFIG_SENSORS_ADM1021=m
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_ASB100 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_FSCHER is not set
# CONFIG_SENSORS_FSCPOS is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
CONFIG_SENSORS_IT87=m
CONFIG_SENSORS_LM63=m
CONFIG_SENSORS_LM75=m
CONFIG_SENSORS_LM77=m
CONFIG_SENSORS_LM78=m
CONFIG_SENSORS_LM80=m
CONFIG_SENSORS_LM83=m
CONFIG_SENSORS_LM85=m
CONFIG_SENSORS_LM87=m
CONFIG_SENSORS_LM90=m
CONFIG_SENSORS_LM92=m
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
CONFIG_SENSORS_VIA686A=m
CONFIG_SENSORS_W83781D=m
# CONFIG_SENSORS_W83792D is not set
CONFIG_SENSORS_W83L785TS=m
CONFIG_SENSORS_W83627HF=m
CONFIG_SENSORS_W83627EHF=m
# CONFIG_SENSORS_HDAPS is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
#
# Misc devices
#
# CONFIG_IBM_ASM is not set
#
# Multimedia Capabilities Port drivers
#
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
#
# Digital Video Broadcasting Devices
#
# CONFIG_DVB is not set
#
# Graphics support
#
CONFIG_FB=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_MACMODES is not set
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ARC is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_VGA16 is not set
# CONFIG_FB_VESA is not set
# CONFIG_VIDEO_SELECT is not set
# CONFIG_FB_HGA is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_I810 is not set
# CONFIG_FB_INTEL is not set
CONFIG_FB_MATROX=y
# CONFIG_FB_MATROX_MILLENIUM is not set
# CONFIG_FB_MATROX_MYSTIQUE is not set
CONFIG_FB_MATROX_G=y
# CONFIG_FB_MATROX_I2C is not set
# CONFIG_FB_MATROX_MULTIHEAD is not set
# CONFIG_FB_RADEON_OLD is not set
CONFIG_FB_RADEON=y
CONFIG_FB_RADEON_I2C=y
CONFIG_FB_RADEON_DEBUG=y
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_CYBLA is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_GEODE is not set
# CONFIG_FB_VIRTUAL is not set
#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
# CONFIG_MDA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
CONFIG_FONTS=y
# CONFIG_FONT_8x8 is not set
# CONFIG_FONT_8x16 is not set
# CONFIG_FONT_6x11 is not set
# CONFIG_FONT_7x14 is not set
# CONFIG_FONT_PEARL_8x8 is not set
# CONFIG_FONT_ACORN_8x8 is not set
# CONFIG_FONT_MINI_4x6 is not set
# CONFIG_FONT_SUN8x16 is not set
# CONFIG_FONT_SUN12x22 is not set
CONFIG_FONT_10x18=y
#
# Logo configuration
#
CONFIG_LOGO=y
CONFIG_LOGO_LINUX_MONO=y
CONFIG_LOGO_LINUX_VGA16=y
CONFIG_LOGO_LINUX_CLUT224=y
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Speakup console speech
#
# CONFIG_SPEAKUP is not set
#
# Sound
#
CONFIG_SOUND=y
#
# Advanced Linux Sound Architecture
#
CONFIG_SND=y
CONFIG_SND_AC97_CODEC=y
CONFIG_SND_AC97_BUS=y
CONFIG_SND_TIMER=y
CONFIG_SND_PCM=y
CONFIG_SND_HWDEP=y
CONFIG_SND_RAWMIDI=y
CONFIG_SND_SEQUENCER=y
# CONFIG_SND_SEQ_DUMMY is not set
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=y
CONFIG_SND_PCM_OSS=y
CONFIG_SND_SEQUENCER_OSS=y
CONFIG_SND_RTCTIMER=y
CONFIG_SND_SEQ_RTCTIMER_DEFAULT=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
#
# Generic devices
#
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_VIRMIDI is not set
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set
#
# ISA devices
#
# CONFIG_SND_AD1848 is not set
# CONFIG_SND_CS4231 is not set
# CONFIG_SND_CS4232 is not set
# CONFIG_SND_CS4236 is not set
# CONFIG_SND_ES1688 is not set
# CONFIG_SND_ES18XX is not set
# CONFIG_SND_GUSCLASSIC is not set
# CONFIG_SND_GUSEXTREME is not set
# CONFIG_SND_GUSMAX is not set
# CONFIG_SND_OPTI92X_AD1848 is not set
# CONFIG_SND_OPTI92X_CS4231 is not set
# CONFIG_SND_OPTI93X is not set
# CONFIG_SND_SB8 is not set
# CONFIG_SND_SB16 is not set
# CONFIG_SND_SBAWE is not set
# CONFIG_SND_WAVEFRONT is not set
# CONFIG_SND_CMI8330 is not set
# CONFIG_SND_OPL3SA2 is not set
# CONFIG_SND_SGALAXY is not set
# CONFIG_SND_SSCAPE is not set
#
# PCI devices
#
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS4281 is not set
CONFIG_SND_EMU10K1=y
# CONFIG_SND_EMU10K1X is not set
# CONFIG_SND_CA0106 is not set
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_HDSPM is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_YMFPCI is not set
# CONFIG_SND_AD1889 is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_CS5535AUDIO is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_FM801 is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
# CONFIG_SND_INTEL8X0 is not set
# CONFIG_SND_INTEL8X0M is not set
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VX222 is not set
# CONFIG_SND_HDA_INTEL is not set
#
# USB devices
#
# CONFIG_SND_USB_AUDIO is not set
# CONFIG_SND_USB_USX2Y is not set
#
# Open Sound System
#
# CONFIG_SOUND_PRIME is not set
#
# USB support
#
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB=y
CONFIG_USB_DEBUG=y
#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_BANDWIDTH is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_SUSPEND is not set
# CONFIG_USB_OTG is not set
#
# USB Host Controller Drivers
#
CONFIG_USB_EHCI_HCD=y
# CONFIG_USB_EHCI_SPLIT_ISO is not set
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_OHCI_HCD is not set
CONFIG_USB_UHCI_HCD=y
# CONFIG_USB_SL811_HCD is not set
#
# USB Device Class drivers
#
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
#
# may also be needed; see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=y
CONFIG_USB_STORAGE_DEBUG=y
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_DPCM is not set
# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_LIBUSUAL is not set
#
# USB Input Devices
#
# CONFIG_USB_HID is not set
#
# USB HID Boot Protocol drivers
#
# CONFIG_USB_KBD is not set
# CONFIG_USB_MOUSE is not set
# CONFIG_USB_AIPTEK is not set
# CONFIG_USB_WACOM is not set
# CONFIG_USB_ACECAD is not set
# CONFIG_USB_KBTAB is not set
# CONFIG_USB_POWERMATE is not set
# CONFIG_USB_MTOUCH is not set
# CONFIG_USB_ITMTOUCH is not set
# CONFIG_USB_EGALAX is not set
# CONFIG_USB_YEALINK is not set
# CONFIG_USB_XPAD is not set
# CONFIG_USB_ATI_REMOTE is not set
# CONFIG_USB_KEYSPAN_REMOTE is not set
# CONFIG_USB_APPLETOUCH is not set
#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
#
# USB Multimedia devices
#
# CONFIG_USB_DABUSB is not set
#
# Video4Linux support is needed for USB Multimedia device support
#
#
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set
CONFIG_USB_MON=y
#
# USB port drivers
#
# CONFIG_USB_USS720 is not set
#
# USB Serial Converter support
#
# CONFIG_USB_SERIAL is not set
#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_GOTEMP is not set
# CONFIG_USB_PHIDGETKIT is not set
# CONFIG_USB_PHIDGETSERVO is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TEST is not set
#
# USB DSL modem support
#
#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
#
# MMC/SD Card support
#
# CONFIG_MMC is not set
#
# InfiniBand support
#
# CONFIG_INFINIBAND is not set
#
# SN Devices
#
#
# EDAC - error detection and reporting (RAS)
#
# CONFIG_EDAC is not set
#
# Distributed Lock Manager
#
# CONFIG_DLM is not set
#
# File systems
#
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
CONFIG_REISER4_FS=y
# CONFIG_REISER4_DEBUG is not set
CONFIG_REISERFS_FS=y
# CONFIG_REISERFS_CHECK is not set
# CONFIG_REISERFS_PROC_INFO is not set
# CONFIG_REISERFS_FS_XATTR is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
# CONFIG_ZISOFS is not set
CONFIG_UDF_FS=y
CONFIG_UDF_NLS=y
#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
# CONFIG_NTFS_FS is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
# CONFIG_RELAYFS_FS is not set
# CONFIG_CONFIGFS_FS is not set
#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_ASFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
#
# Network File Systems
#
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
# CONFIG_NFS_V4 is not set
CONFIG_NFS_DIRECTIO=y
CONFIG_NFSD=y
CONFIG_NFSD_V3=y
# CONFIG_NFSD_V3_ACL is not set
# CONFIG_NFSD_V4 is not set
CONFIG_NFSD_TCP=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
# CONFIG_9P_FS is not set
#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
#
# Native Language Support
#
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=y
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set
#
# Instrumentation Support
#
# CONFIG_PROFILING is not set
# CONFIG_KPROBES is not set
#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
# CONFIG_DEBUG_KERNEL is not set
CONFIG_LOG_BUF_SHIFT=15
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_EARLY_PRINTK=y
CONFIG_X86_FIND_SMP_CONFIG=y
CONFIG_X86_MPPARSE=y
#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
#
# Cryptographic options
#
# CONFIG_CRYPTO is not set
#
# Hardware crypto devices
#
#
# Library routines
#
CONFIG_CRC_CCITT=y
# CONFIG_CRC16 is not set
CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=m
CONFIG_TEXTSEARCH_BM=m
CONFIG_TEXTSEARCH_FSM=m
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_PENDING_IRQ=y
CONFIG_X86_SMP=y
CONFIG_X86_HT=y
CONFIG_X86_BIOS_REBOOT=y
CONFIG_X86_TRAMPOLINE=y
dmesg with 2.6.15-rc1-mm2:
Linux version 2.6.15-rc1-mm2 (jurriaan@adsl-gate) (gcc version 4.0.3 20051111 (prerelease) (Debian 4.0.2-4)) #1 SMP Sat Nov 19 20:24:26 CET 2005
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009bc00 (usable)
BIOS-e820: 000000000009bc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000bfff0000 (usable)
BIOS-e820: 00000000bfff0000 - 00000000bfff3000 (ACPI NVS)
BIOS-e820: 00000000bfff3000 - 00000000c0000000 (ACPI data)
BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
2175MB HIGHMEM available.
896MB LOWMEM available.
found SMP MP-table at 000f5810
On node 0 totalpages: 786416
DMA zone: 4096 pages, LIFO batch:2
DMA32 zone: 0 pages, LIFO batch:2
Normal zone: 225280 pages, LIFO batch:64
HighMem zone: 557040 pages, LIFO batch:64
DMI 2.2 present.
ACPI: RSDP (v000 IntelR ) @ 0x000f7330
ACPI: RSDT (v001 IntelR AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0xbfff3000
ACPI: FADT (v001 IntelR AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0xbfff3040
ACPI: MADT (v001 IntelR AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0xbfff7400
ACPI: DSDT (v001 INTELR AWRDACPI 0x00001000 MSFT 0x0100000e) @ 0x00000000
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 15:2 APIC version 20
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
Processor #1 15:2 APIC version 20
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode: Flat. Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at c4000000 (gap: c0000000:3ec00000)
Built 1 zonelists
mapped APIC to ffffd000 (fee00000)
mapped IOAPIC to ffffc000 (fec00000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
Kernel command line: root=/dev/md4 video=radeonfb:1600x1200-32@85 acpi=force atkbd.softrepeat=1
PID hash table entries: 4096 (order: 12, 65536 bytes)
Detected 2399.833 MHz processor.
Using tsc for high-res timesource
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 3112672k/3145664k available (3717k kernel code, 31020k reserved, 1195k data, 248k init, 2228160k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 4805.18 BogoMIPS (lpj=24025918)
Mount-cache hash table entries: 512
CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000
CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 512K
CPU: Physical Processor ID: 0
CPU: After all inits, caps: bfebfbff 00000000 00000000 00000080 00004400 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
CPU0: Thermal monitoring enabled
mtrr: v2.0 (20020519)
Checking 'hlt' instruction... OK.
CPU0: Intel(R) Pentium(R) 4 CPU 2.40GHz stepping 09
Booting processor 1/1 eip 2000
Initializing CPU#1
Calibrating delay using timer specific routine.. 4799.60 BogoMIPS (lpj=23998036)
CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000
CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 512K
CPU: Physical Processor ID: 0
CPU: After all inits, caps: bfebfbff 00000000 00000000 00000080 00004400 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#1.
CPU1: Intel P4/Xeon Extended MCE MSRs (12) available
CPU1: Thermal monitoring enabled
CPU1: Intel(R) Pentium(R) 4 CPU 2.40GHz stepping 09
Total of 2 processors activated (9604.79 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
checking TSC synchronization across 2 CPUs: passed.
Brought up 2 CPUs
-> [0][1][ 262144] 0.0 [ 0.0] (0): ( 1658 829)
-> [0][1][ 275941] 0.0 [ 0.0] (0): ( -114 1300)
-> [0][1][ 290464] 0.0 [ 0.0] (0): ( 1282 1348)
-> [0][1][ 305751] 0.0 [ 0.0] (0): ( 1171 729)
-> [0][1][ 321843] 0.0 [ 0.0] (0): ( -175 1037)
-> [0][1][ 338782] 0.0 [ 0.0] (0): ( 2324 1768)
-> [0][1][ 356612] 0.0 [ 0.0] (0): ( 87 2002)
-> [0][1][ 375381] 0.0 [ 0.0] (0): ( 4828 3371)
-> [0][1][ 395137] 0.0 [ 0.0] (0): ( 2012 3093)
-> [0][1][ 415933] 0.0 [ 0.0] (0): ( 5191 3136)
-> [0][1][ 437824] 0.0 [ 0.0] (0): ( 5108 1609)
-> [0][1][ 460867] 0.0 [ 0.0] (0): ( 6856 1678)
-> [0][1][ 485123] 0.0 [ 0.0] (0): ( 17340 6081)
-> [0][1][ 510655] 0.0 [ 0.0] (0): ( 36676 12708)
-> [0][1][ 537531] 0.0 [ 0.0] (0): ( 67647 21839)
-> [0][1][ 565822] 0.0 [ 0.0] (0): ( 53040 18223)
-> [0][1][ 595602] 0.0 [ 0.0] (0): ( 5579 32842)
-> [0][1][ 626949] 0.0 [ 0.0] (0): ( 3973 17224)
-> [0][1][ 659946] 0.0 [ 0.0] (0): ( -1624 11410)
-> [0][1][ 694680] 0.0 [ 0.0] (0): ( 158 6596)
-> [0][1][ 731242] 0.0 [ 0.0] (0): ( -4736 5745)
-> found max.
[0][1] working set size found: 537531, cost: 67647
---------------------
| migration cost matrix (max_cache_size: 524288, cpu: 2399 MHz):
---------------------
[00] [01]
[00]: - 0.1(0)
[01]: 0.1(0) -
--------------------------------
| cacheflush times [1]: 0.1 (135294)
| calibration delay: 0 seconds
--------------------------------
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfbb40, last bus=2
PCI: Using configuration type 1
usbcore: registered new driver usbfs
usbcore: registered new driver hub
ACPI: Subsystem revision 20050916
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
PCI quirk: region 0400-047f claimed by ICH4 ACPI/GPIO/TCO
PCI quirk: region 0480-04bf claimed by ICH4 GPIO
PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
Boot video device is 0000:01:00.0
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 *9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 *7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 *5 7 9 10 11 12 14 15)
SCSI subsystem initialized
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
PCI: Bridge: 0000:00:01.0
IO window: b000-bfff
MEM window: f8000000-f9ffffff
PREFETCH window: d0000000-efffffff
PCI: Bridge: 0000:00:1e.0
IO window: 9000-afff
MEM window: fa000000-fbffffff
PREFETCH window: c4000000-c40fffff
PCI: Setting latency timer of device 0000:00:1e.0 to 64
highmem bounce pool size: 64 pages
Loading Reiser4. See http://www.namesys.com for a description of Reiser4.
Installing knfsd (copyright (C) 1996 [email protected]).
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
0000:00:1d.0: uhci_check_and_reset_hc: legsup = 0x2f00
0000:00:1d.0: Performing full reset
0000:00:1d.1: uhci_check_and_reset_hc: legsup = 0x2000
0000:00:1d.1: Performing full reset
0000:00:1d.2: uhci_check_and_reset_hc: legsup = 0x2000
0000:00:1d.2: Performing full reset
0000:00:1d.3: uhci_check_and_reset_hc: legsup = 0x2000
0000:00:1d.3: Performing full reset
usbmon: debugfs is not available
ehci_hcd: block sizes: qh 128 qtd 96 itd 192 sitd 96
ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: reset hcs_params 0x104208 dbg=1 cc=4 pcc=2 ordered !ppc ports=8
ehci_hcd 0000:00:1d.7: reset hcc_params 6871 thresh 7 uframes 1024 64 bit addr
ehci_hcd 0000:00:1d.7: capability 0001 at 68
PCI: cache line size of 128 is not supported by device 0000:00:1d.7
drivers/usb/core/inode.c: creating file 'devices'
drivers/usb/core/inode.c: creating file '001'
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.7: irq 16, io mem 0xfc000000
ehci_hcd 0000:00:1d.7: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT
ehci_hcd 0000:00:1d.7: init command 010001 (park)=0 ithresh=1 period=1024 RUN
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: default language 0x0409
usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.15-rc1-mm2 ehci_hcd
usb usb1: SerialNumber: 0000:00:1d.7
usb usb1: hotplug
usb usb1: adding 1-0:1.0 (config #1, interface 0)
usb 1-0:1.0: hotplug
hub 1-0:1.0: usb_probe_interface
hub 1-0:1.0: usb_probe_interface - got id
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
hub 1-0:1.0: standalone hub
hub 1-0:1.0: no power switching (usb 1.0)
hub 1-0:1.0: individual port over-current protection
hub 1-0:1.0: Single TT
hub 1-0:1.0: TT requires at most 8 FS bit times (666 ns)
hub 1-0:1.0: power on to power good time: 20ms
hub 1-0:1.0: local power source is good
hub 1-0:1.0: state 5 ports 8 chg 0000 evt 0000
drivers/usb/core/inode.c: creating file '001'
USB Universal Host Controller Interface driver v2.3
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: detected 2 ports
uhci_hcd 0000:00:1d.0: uhci_check_and_reset_hc: cmd = 0x0000
uhci_hcd 0000:00:1d.0: Performing full reset
drivers/usb/core/inode.c: creating file '002'
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 17, io base 0x0000c300
usb usb2: default language 0x0409
usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: UHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.15-rc1-mm2 uhci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
usb usb2: hotplug
usb usb2: adding 2-0:1.0 (config #1, interface 0)
usb 2-0:1.0: hotplug
hub 2-0:1.0: usb_probe_interface
hub 2-0:1.0: usb_probe_interface - got id
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
hub 2-0:1.0: standalone hub
hub 2-0:1.0: no power switching (usb 1.0)
hub 2-0:1.0: individual port over-current protection
hub 2-0:1.0: power on to power good time: 2ms
hub 2-0:1.0: local power source is good
hub 2-0:1.0: state 5 ports 2 chg 0000 evt 0000
drivers/usb/core/inode.c: creating file '001'
ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: detected 2 ports
uhci_hcd 0000:00:1d.1: uhci_check_and_reset_hc: cmd = 0x0000
uhci_hcd 0000:00:1d.1: Performing full reset
drivers/usb/core/inode.c: creating file '003'
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 18, io base 0x0000c000
usb usb3: default language 0x0409
usb usb3: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.15-rc1-mm2 uhci_hcd
usb usb3: SerialNumber: 0000:00:1d.1
usb usb3: hotplug
usb usb3: adding 3-0:1.0 (config #1, interface 0)
usb 3-0:1.0: hotplug
hub 3-0:1.0: usb_probe_interface
hub 3-0:1.0: usb_probe_interface - got id
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
hub 3-0:1.0: standalone hub
hub 3-0:1.0: no power switching (usb 1.0)
hub 3-0:1.0: individual port over-current protection
hub 3-0:1.0: power on to power good time: 2ms
hub 3-0:1.0: local power source is good
hub 3-0:1.0: state 5 ports 2 chg 0000 evt 0000
drivers/usb/core/inode.c: creating file '001'
ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: detected 2 ports
uhci_hcd 0000:00:1d.2: uhci_check_and_reset_hc: cmd = 0x0000
uhci_hcd 0000:00:1d.2: Performing full reset
drivers/usb/core/inode.c: creating file '004'
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: irq 19, io base 0x0000c100
usb usb4: default language 0x0409
usb usb4: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.15-rc1-mm2 uhci_hcd
usb usb4: SerialNumber: 0000:00:1d.2
usb usb4: hotplug
usb usb4: adding 4-0:1.0 (config #1, interface 0)
usb 4-0:1.0: hotplug
hub 4-0:1.0: usb_probe_interface
hub 4-0:1.0: usb_probe_interface - got id
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
hub 4-0:1.0: standalone hub
hub 4-0:1.0: no power switching (usb 1.0)
hub 4-0:1.0: individual port over-current protection
hub 4-0:1.0: power on to power good time: 2ms
hub 4-0:1.0: local power source is good
hub 4-0:1.0: state 5 ports 2 chg 0000 evt 0000
drivers/usb/core/inode.c: creating file '001'
ACPI: PCI Interrupt 0000:00:1d.3[A] -> GSI 16 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:00:1d.3 to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: detected 2 ports
uhci_hcd 0000:00:1d.3: uhci_check_and_reset_hc: cmd = 0x0000
uhci_hcd 0000:00:1d.3: Performing full reset
drivers/usb/core/inode.c: creating file '005'
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.3: irq 17, io base 0x0000c200
usb usb5: default language 0x0409
usb usb5: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 2.6.15-rc1-mm2 uhci_hcd
usb usb5: SerialNumber: 0000:00:1d.3
usb usb5: hotplug
usb usb5: adding 5-0:1.0 (config #1, interface 0)
usb 5-0:1.0: hotplug
hub 5-0:1.0: usb_probe_interface
hub 5-0:1.0: usb_probe_interface - got id
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
hub 5-0:1.0: standalone hub
hub 5-0:1.0: no power switching (usb 1.0)
hub 5-0:1.0: individual port over-current protection
hub 5-0:1.0: power on to power good time: 2ms
hub 5-0:1.0: local power source is good
hub 5-0:1.0: state 5 ports 2 chg 0000 evt 0000
drivers/usb/core/inode.c: creating file '001'
Initializing USB Mass Storage driver...
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
radeonfb_pci_register BEGIN
ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 17
radeonfb (0000:01:00.0): Found 131072k of DDR 64 bits wide videoram
radeonfb (0000:01:00.0): mapped 16384k videoram
radeonfb: Found Intel x86 BIOS ROM Image
radeonfb: Retreived PLL infos from BIOS
radeonfb: Reference=27.00 MHz (RefDiv=12) Memory=324.00 Mhz, System=182.00 MHz
radeonfb: PLL min 20000 max 40000
1 chips in connector info
- chip 1 has 2 connectors
* connector 0 of type 2 (CRT) : 2300
* connector 1 of type 3 (DVI-I) : 3221
Starting monitor auto detection...
radeonfb: I2C (port 1) ... not found
uhci_hcd 0000:00:1d.0: suspend_rh (auto-stop)
uhci_hcd 0000:00:1d.1: suspend_rh (auto-stop)
uhci_hcd 0000:00:1d.2: suspend_rh (auto-stop)
uhci_hcd 0000:00:1d.3: suspend_rh (auto-stop)
radeonfb: I2C (port 2) ... not found
radeonfb: I2C (port 3) ... not found
radeonfb: I2C (port 4) ... not found
radeonfb: I2C (port 2) ... not found
radeonfb: I2C (port 4) ... not found
radeonfb: I2C (port 3) ... not found
radeonfb: I2C (port 4) ... not found
radeonfb: Monitor 1 type CRT found
radeonfb: Monitor 2 type no found
hStart = 1616, hEnd = 1808, hTotal = 2080
vStart = 1204, vEnd = 1207, vTotal = 1244
h_total_disp = 0xc70103 hsync_strt_wid = 0x18064d
v_total_disp = 0x4af04db vsync_strt_wid = 0x304b3
pixclock = 4545
freq = 22002
freq = 22002, PLL min = 20000, PLL max = 40000
ref_div = 12, ref_clk = 2700, output_freq = 22002
ref_div = 12, ref_clk = 2700, output_freq = 22002
post div = 0x0
fb_div = 0x62
ppll_div_3 = 0x62
Console: switching to colour frame buffer device 160x66
radeonfb (0000:01:00.0): ATI Radeon AQ
radeonfb_pci_register END
ACPI: Power Button (FF) [PWRF]
ACPI: Power Button (CM) [PWRB]
ACPI: Fan [FAN] (on)
ACPI: CPU0 (power states: C1[C1])
ACPI: CPU1 (power states: C1[C1])
ACPI: Thermal Zone [THRM] (22 C)
lp: driver loaded but no devices found
Real Time Clock Driver v1.12
Linux agpgart interface v0.101 (c) Dave Jones
agpgart: Detected an Intel i875 Chipset.
agpgart: AGP aperture is 128M @ 0xf0000000
[drm] Initialized drm 1.0.1 20051102
ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 17
[drm] Initialized radeon 1.19.0 20050911 on minor 0
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
mice: PS/2 mouse device common for all mice
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
input: AT Translated Set 2 keyboard as /class/input/input0
loop: loaded (max 8 devices)
Intel(R) PRO/1000 Network Driver - version 6.1.16-k2-NAPI
Copyright (c) 1999-2005 Intel Corporation.
ACPI: PCI Interrupt 0000:02:07.0[A] -> GSI 23 (level, low) -> IRQ 16
logips2pp: Detected unknown logitech mouse model 1
input: ImPS/2 Logitech Wheel Mouse as /class/input/input1
e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
Linux Tulip driver version 1.1.13 (December 15, 2004)
ACPI: PCI Interrupt 0000:02:02.0[A] -> GSI 18 (level, low) -> IRQ 19
tulip0: MII transceiver #1 config 3100 status 7829 advertising 01e1.
eth1: Lite-On 82c168 PNIC rev 32 at f8804000, 00:A0:CC:21:89:0C, IRQ 19.
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH5: IDE controller at PCI slot 0000:00:1f.1
ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 19
ICH5: chipset revision 2
ICH5: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA
Probing IDE interface ide0...
hda: IC35L120AVV207-1, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: IC35L120AVV207-1, ATA DISK drive
hdd: _NEC DVD_RW ND-1300A, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
HPT374: IDE controller at PCI slot 0000:02:00.0
PCI: Enabling device 0000:02:00.0 (0005 -> 0007)
ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 17
HPT374: chipset revision 7
HPT374: 100% native mode on irq 17
HPT37X: using 33MHz PCI clock
ide2: BM-DMA at 0x9400-0x9407, BIOS settings: hde:DMA, hdf:pio
HPT37X: using 33MHz PCI clock
ide3: BM-DMA at 0x9408-0x940f, BIOS settings: hdg:DMA, hdh:pio
ACPI: PCI Interrupt 0000:02:00.1[A] -> GSI 16 (level, low) -> IRQ 17
HPT37X: using 33MHz PCI clock
ide4: BM-DMA at 0x9900-0x9907, BIOS settings: hdi:DMA, hdj:pio
HPT37X: using 33MHz PCI clock
ide5: BM-DMA at 0x9908-0x990f, BIOS settings: hdk:DMA, hdl:pio
Probing IDE interface ide2...
hde: WDC WD2000JB-00FUA0, ATA DISK drive
ide2 at 0x9000-0x9007,0x9102 on irq 17
Probing IDE interface ide3...
hdg: WDC WD2500JB-00FUA0, ATA DISK drive
ide3 at 0x9200-0x9207,0x9302 on irq 17
Probing IDE interface ide4...
hdi: WDC WD2000BB-00DAA1, ATA DISK drive
ide4 at 0x9500-0x9507,0x9602 on irq 17
Probing IDE interface ide5...
hdk: ST3300831A, ATA DISK drive
ide5 at 0x9700-0x9707,0x9802 on irq 17
HPT374: IDE controller at PCI slot 0000:02:06.0
PCI: Enabling device 0000:02:06.0 (0005 -> 0007)
ACPI: PCI Interrupt 0000:02:06.0[A] -> GSI 22 (level, low) -> IRQ 20
HPT374: chipset revision 7
HPT374: 100% native mode on irq 20
HPT37X: using 33MHz PCI clock
ide6: BM-DMA at 0xa100-0xa107, BIOS settings: hdm:pio, hdn:DMA
HPT37X: using 33MHz PCI clock
ide7: BM-DMA at 0xa108-0xa10f, BIOS settings: hdo:pio, hdp:DMA
ACPI: PCI Interrupt 0000:02:06.1[A] -> GSI 22 (level, low) -> IRQ 20
HPT37X: using 33MHz PCI clock
ide8: BM-DMA at 0xa600-0xa607, BIOS settings: hdq:DMA, hdr:pio
HPT37X: using 33MHz PCI clock
ide9: BM-DMA at 0xa608-0xa60f, BIOS settings: hds:pio, hdt:DMA
Probing IDE interface ide6...
hdn: Maxtor 4A300J0, ATA DISK drive
ide6 at 0x9d00-0x9d07,0x9e02 on irq 20
Probing IDE interface ide7...
hdp: Maxtor 6Y200P0, ATA DISK drive
ide7 at 0x9f00-0x9f07,0xa002 on irq 20
Probing IDE interface ide8...
hdq: WDC WD2500JB-00FUA0, ATA DISK drive
ide8 at 0xa200-0xa207,0xa302 on irq 20
Probing IDE interface ide9...
hdt: Maxtor 4A300J0, ATA DISK drive
ide9 at 0xa400-0xa407,0xa502 on irq 20
hda: max request size: 1024KiB
hda: 241254720 sectors (123522 MB) w/7965KiB Cache, CHS=16383/255/63, UDMA(100)
hda: cache flushes supported
hda: hda1 hda2
hdc: max request size: 1024KiB
hdc: 241254720 sectors (123522 MB) w/7965KiB Cache, CHS=16383/255/63, UDMA(100)
hdc: cache flushes supported
hdc: hdc1 hdc2
hde: max request size: 1024KiB
hde: 390721968 sectors (200049 MB) w/8192KiB Cache, CHS=24321/255/63, UDMA(33)
hde: cache flushes supported
hde: hde1
hdg: max request size: 1024KiB
hdg: 488397168 sectors (250059 MB) w/8192KiB Cache, CHS=30401/255/63, UDMA(100)
hdg: cache flushes supported
hdg: hdg1
hdi: max request size: 1024KiB
hdi: 390721968 sectors (200049 MB) w/2048KiB Cache, CHS=24321/255/63, UDMA(100)
hdi: cache flushes supported
hdi: hdi1
hdk: max request size: 1024KiB
hdk: 586072368 sectors (300069 MB) w/8192KiB Cache, CHS=36481/255/63, UDMA(100)
hdk: cache flushes supported
hdk: hdk1
hdn: max request size: 1024KiB
hdn: 585940320 sectors (300001 MB) w/2048KiB Cache, CHS=36473/255/63, UDMA(100)
hdn: cache flushes supported
hdn: hdn1
hdp: max request size: 1024KiB
hdp: 398297088 sectors (203928 MB) w/7936KiB Cache, CHS=24792/255/63, UDMA(100)
hdp: cache flushes supported
hdp: hdp1
hdq: max request size: 1024KiB
hdq: 488397168 sectors (250059 MB) w/8192KiB Cache, CHS=30401/255/63, UDMA(100)
hdq: cache flushes supported
hdq: hdq1
hdt: max request size: 1024KiB
hdt: 585940320 sectors (300001 MB) w/2048KiB Cache, CHS=36473/255/63, UDMA(100)
hdt: cache flushes supported
hdt: hdt1
hdd: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
i2c /dev entries driver
md: linear personality registered as nr 1
md: raid0 personality registered as nr 2
md: raid1 personality registered as nr 3
md: raid5 personality registered as nr 4
raid5: automatically using best checksumming function: pIII_sse
pIII_sse : 1714.800 MB/sec
raid5: using function: pIII_sse (1714.800 MB/sec)
md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: bitmap version 4.39
Advanced Linux Sound Architecture Driver Version 1.0.10rc3 (Mon Nov 07 13:30:21 2005 UTC).
ACPI: PCI Interrupt 0000:02:05.0[A] -> GSI 21 (level, low) -> IRQ 21
Installing spdif_bug patch: Audigy 2 [SB0240]
ALSA device list:
#0: Audigy 2 [SB0240] (rev.4, serial:0x10071102) at 0x9b00, irq 21
NET: Registered protocol family 2
IP route cache hash table entries: 131072 (order: 7, 524288 bytes)
TCP established hash table entries: 524288 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP reno registered
ip_conntrack version 2.4 (8192 buckets, 65536 max) - 216 bytes per conntrack
ip_tables: (C) 2000-2002 Netfilter core team
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 10
IPv6 over IPv4 tunneling driver
ip6_tables: (C) 2000-2002 Netfilter core team
registering ipv6 mark target
NET: Registered protocol family 17
Starting balanced_irq
Using IPI Shortcut mode
md: Autodetecting RAID arrays.
md: autorun ...
md: considering hdt1 ...
md: adding hdt1 ...
md: hdq1 has different UUID to hdt1
md: hdn1 has different UUID to hdt1
md: adding hdi1 ...
md: hdg1 has different UUID to hdt1
md: hde1 has different UUID to hdt1
md: hdc2 has different UUID to hdt1
md: hdc1 has different UUID to hdt1
md: hda2 has different UUID to hdt1
md: hda1 has different UUID to hdt1
md: created md2
md: bind<hdi1>
md: bind<hdt1>
md: running: <hdt1><hdi1>
md: considering hdq1 ...
md: adding hdq1 ...
md: hdn1 has different UUID to hdq1
md: adding hdg1 ...
md: hde1 has different UUID to hdq1
md: hdc2 has different UUID to hdq1
md: hdc1 has different UUID to hdq1
md: hda2 has different UUID to hdq1
md: hda1 has different UUID to hdq1
md: created md3
md: bind<hdg1>
md: bind<hdq1>
md: running: <hdq1><hdg1>
md: considering hdn1 ...
md: adding hdn1 ...
md: adding hde1 ...
md: hdc2 has different UUID to hdn1
md: hdc1 has different UUID to hdn1
md: hda2 has different UUID to hdn1
md: hda1 has different UUID to hdn1
md: created md1
md: bind<hde1>
md: bind<hdn1>
md: running: <hdn1><hde1>
md: considering hdc2 ...
md: adding hdc2 ...
md: hdc1 has different UUID to hdc2
md: adding hda2 ...
md: hda1 has different UUID to hdc2
md: created md0
md: bind<hda2>
md: bind<hdc2>
md: running: <hdc2><hda2>
raid1: raid set md0 active with 2 out of 2 mirrors
md: considering hdc1 ...
md: adding hdc1 ...
md: adding hda1 ...
md: created md4
md: bind<hda1>
md: bind<hdc1>
md: running: <hdc1><hda1>
raid1: raid set md4 active with 2 out of 2 mirrors
md: ... autorun DONE.
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 248k freed
Adding 3437816k swap on /dev/md0. Priority:-1 extents:1 across:3437816k
EXT3 FS on md4, internal journal
kjournald starting. Commit interval 5 seconds
EXT3 FS on hdk1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on md1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on md2, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on md3, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
e1000: switch: e1000_watchdog_task: NIC Link is Up 1000 Mbps Full Duplex
adsl: Setting full-duplex based on MII#1 link partner capability of 05e1.
e1000: switch: e1000_watchdog_task: NIC Link is Up 1000 Mbps Full Duplex
adsl: no IPv6 routers present
switch: no IPv6 routers present
Good luck,
Jurriaan
--
'Kruppe is wise - wise enough to keep silent when silence is called for,
and yet wiser still to speak when wise words are required. Wisdom, after
all, is Kruppe's blood brother.'
Steven Erikson - Memories of Ice
Debian (Unstable) GNU/Linux 2.6.15-rc1-mm2 2x4805 bogomips 0.00
* Andrew Morton <[email protected]> [2005-11-23 03:35:50 -0800]:
>
> ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.15-rc2/2.6.15-rc2-mm1/
>
> (temp copy at http://www.zip.com.au/~akpm/linux/patches/stuff/2.6.15-rc2-mm1.gz)
>
> - Added git-sym2.patch to the -mm lineup: updates to the sym2 scsi driver
> (Matthew Wilcox).
>
> - The JSM tty driver still doesn't compile.
>
> - The git-powerpc tree is included now.
Just booted into 2.6.15-rc2-mm1. The 'mouse problem' (as reported earlier) still
persists, moreover, some stuff's now really not gonna work anymore. I logged in
via gdm once and rebooted.
Ragards,
Marc
Nov 23 18:33:43 stiffy syslogd 1.4.1#17: restart.
Nov 23 18:33:44 stiffy kernel: klogd 1.4.1#17, log source = /proc/kmsg started.
Nov 23 18:33:44 stiffy kernel: Inspecting /boot/System.map-2.6.15-rc2-mm1-marc
Nov 23 18:33:44 stiffy kernel: Loaded 21947 symbols from /boot/System.map-2.6.15-rc2-mm1-marc.
Nov 23 18:33:44 stiffy kernel: Symbols match kernel version 2.6.15.
Nov 23 18:33:44 stiffy kernel: No module symbols loaded - kernel modules not enabled.
Nov 23 18:33:44 stiffy kernel: 024x16, linelength=2560, pages=1
Nov 23 18:33:44 stiffy kernel: vesafb: protected mode interface info at c000:d6a0
Nov 23 18:33:44 stiffy kernel: vesafb: scrolling: redraw
Nov 23 18:33:44 stiffy kernel: vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
Nov 23 18:33:44 stiffy kernel: Console: switching to colour frame buffer device 160x64
Nov 23 18:33:44 stiffy kernel: fb0: VESA VGA frame buffer device
Nov 23 18:33:45 stiffy kernel: PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
Nov 23 18:33:45 stiffy kernel: serio: i8042 AUX port at 0x60,0x64 irq 12
Nov 23 18:33:45 stiffy kernel: serio: i8042 KBD port at 0x60,0x64 irq 1
Nov 23 18:33:45 stiffy kernel: Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
Nov 23 18:33:45 stiffy kernel: serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Nov 23 18:33:45 stiffy kernel: serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
Nov 23 18:33:45 stiffy kernel: serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Nov 23 18:33:45 stiffy kernel: 00:0d: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Nov 23 18:33:45 stiffy kernel: ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 5
Nov 23 18:33:45 stiffy kernel: PCI: setting IRQ 5 as level-triggered
Nov 23 18:33:45 stiffy kernel: ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [LNKB] -> GSI 5 (level, low) -> IRQ 5
Nov 23 18:33:45 stiffy kernel: ACPI: PCI interrupt for device 0000:00:1f.6 disabled
Nov 23 18:33:45 stiffy kernel: RAMDISK driver initialized: 4 RAM disks of 8192K size 1024 blocksize
Nov 23 18:33:45 stiffy kernel: Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
Nov 23 18:33:45 stiffy kernel: ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Nov 23 18:33:45 stiffy kernel: ICH3M: IDE controller at PCI slot 0000:00:1f.1
Nov 23 18:33:45 stiffy kernel: PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
Nov 23 18:33:45 stiffy kernel: ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
Nov 23 18:33:45 stiffy kernel: ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
Nov 23 18:33:45 stiffy kernel: ICH3M: chipset revision 2
Nov 23 18:33:45 stiffy kernel: ICH3M: not 100%% native mode: will probe irqs later
Nov 23 18:33:45 stiffy kernel: ide0: BM-DMA at 0xbfa0-0xbfa7, BIOS settings: hda:DMA, hdb:DMA
Nov 23 18:33:45 stiffy kernel: ide1: BM-DMA at 0xbfa8-0xbfaf, BIOS settings: hdc:pio, hdd:pio
Nov 23 18:33:45 stiffy kernel: input: AT Translated Set 2 keyboard as /class/input/input0
Nov 23 18:33:45 stiffy kernel: hda: HTS726060M9AT00, ATA DISK drive
Nov 23 18:33:45 stiffy kernel: hdb: HL-DT-STCD-RW/DVD-ROM GCC-4240N, ATAPI CD/DVD-ROM drive
Nov 23 18:33:45 stiffy kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Nov 23 18:33:45 stiffy kernel: hda: max request size: 1024KiB
Nov 23 18:33:45 stiffy kernel: hda: 117210240 sectors (60011 MB) w/7877KiB Cache, CHS=16383/255/63
Nov 23 18:33:45 stiffy kernel: hda: cache flushes supported
Nov 23 18:33:45 stiffy kernel: hda: hda1 hda2 < hda5 hda6 hda7 hda8 >
Nov 23 18:33:45 stiffy kernel: EISA: Probing bus 0 at eisa.0
Nov 23 18:33:45 stiffy kernel: NET: Registered protocol family 2
Nov 23 18:33:45 stiffy kernel: IP route cache hash table entries: 8192 (order: 3, 32768 bytes)
Nov 23 18:33:45 stiffy kernel: TCP established hash table entries: 32768 (order: 5, 131072 bytes)
Nov 23 18:33:45 stiffy kernel: TCP bind hash table entries: 32768 (order: 5, 131072 bytes)
Nov 23 18:33:45 stiffy kernel: TCP: Hash tables configured (established 32768 bind 32768)
Nov 23 18:33:45 stiffy kernel: TCP reno registered
Nov 23 18:33:45 stiffy kernel: TCP bic registered
Nov 23 18:33:45 stiffy kernel: NET: Registered protocol family 8
Nov 23 18:33:45 stiffy kernel: NET: Registered protocol family 20
Nov 23 18:33:45 stiffy kernel: Using IPI Shortcut mode
Nov 23 18:33:45 stiffy kernel: ACPI wakeup devices:
Nov 23 18:33:45 stiffy kernel: LID PBTN PCI0 UAR1 USB0 USB1 USB2 MODM PCIE MPCI
Nov 23 18:33:46 stiffy kernel: ACPI: (supports S0 S1 S3 S4 S5)
Nov 23 18:33:46 stiffy kernel: BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
Nov 23 18:33:46 stiffy kernel: RAMDISK: cramfs filesystem found at block 0
Nov 23 18:33:46 stiffy kernel: RAMDISK: Loading 1192KiB [1 disk] into ram disk... |^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^Hdone.
Nov 23 18:33:47 stiffy kernel: VFS: Mounted root (cramfs filesystem) readonly.
Nov 23 18:33:47 stiffy kernel: Freeing unused kernel memory: 248k freed
Nov 23 18:33:47 stiffy kernel: NET: Registered protocol family 1
Nov 23 18:33:48 stiffy kernel: ReiserFS: hda7: found reiserfs format "3.6" with standard journal
Nov 23 18:33:48 stiffy kernel: ReiserFS: hda7: using ordered data mode
Nov 23 18:33:48 stiffy kernel: ReiserFS: hda7: journal params: device hda7, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
Nov 23 18:33:48 stiffy kernel: ReiserFS: hda7: checking transaction log (hda7)
Nov 23 18:33:48 stiffy kernel: ReiserFS: hda7: Using r5 hash to sort names
Nov 23 18:33:48 stiffy kernel: Linux agpgart interface v0.101 (c) Dave Jones
Nov 23 18:33:48 stiffy kernel: agpgart: Detected an Intel i845 Chipset.
Nov 23 18:33:48 stiffy kernel: agpgart: AGP aperture is 64M @ 0xe8000000
Nov 23 18:33:48 stiffy kernel: usbcore: registered new driver usbfs
Nov 23 18:33:48 stiffy kernel: usbcore: registered new driver hub
Nov 23 18:33:48 stiffy kernel: USB Universal Host Controller Interface driver v2.3
Nov 23 18:33:48 stiffy kernel: ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
Nov 23 18:33:48 stiffy kernel: uhci_hcd 0000:00:1d.0: UHCI Host Controller
Nov 23 18:33:48 stiffy kernel: uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
Nov 23 18:33:48 stiffy kernel: uhci_hcd 0000:00:1d.0: irq 11, io base 0x0000bf80
Nov 23 18:33:48 stiffy kernel: hub 1-0:1.0: USB hub found
Nov 23 18:33:48 stiffy kernel: hub 1-0:1.0: 2 ports detected
Nov 23 18:33:48 stiffy kernel: hw_random hardware driver 1.0.0 loaded
Nov 23 18:33:48 stiffy kernel: ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
Nov 23 18:33:48 stiffy kernel: ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
Nov 23 18:33:48 stiffy kernel: uhci_hcd 0000:00:1d.2: UHCI Host Controller
Nov 23 18:33:48 stiffy kernel: uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 2
Nov 23 18:33:48 stiffy kernel: uhci_hcd 0000:00:1d.2: irq 11, io base 0x0000bf20
Nov 23 18:33:48 stiffy kernel: hub 2-0:1.0: USB hub found
Nov 23 18:33:48 stiffy kernel: hub 2-0:1.0: 2 ports detected
Nov 23 18:33:48 stiffy kernel: hdb: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache
Nov 23 18:33:48 stiffy kernel: Uniform CD-ROM driver Revision: 3.20
Nov 23 18:33:48 stiffy kernel: ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
Nov 23 18:33:48 stiffy kernel: 3c59x: Donald Becker and others. http://www.scyld.com/network/vortex.html
Nov 23 18:33:48 stiffy kernel: 0000:02:00.0: 3Com PCI 3c905C Tornado at e085cc00. Vers LK1.1.19
Nov 23 18:33:48 stiffy kernel: usb 2-1: new full speed USB device using uhci_hcd and address 2
Nov 23 18:33:48 stiffy kernel: ACPI: PCI Interrupt 0000:02:01.0[A] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
Nov 23 18:33:48 stiffy kernel: Yenta: CardBus bridge found at 0000:02:01.0 [1028:00d4]
Nov 23 18:33:48 stiffy kernel: Yenta: Using CSCINT to route CSC interrupts to PCI
Nov 23 18:33:48 stiffy kernel: Yenta: Routing CardBus interrupts to PCI
Nov 23 18:33:49 stiffy kernel: Yenta TI: socket 0000:02:01.0, mfunc 0x05033002, devctl 0x64
Nov 23 18:33:49 stiffy kernel: Real Time Clock Driver v1.12
Nov 23 18:33:49 stiffy kernel: Yenta: ISA IRQ mask 0x0498, PCI irq 11
Nov 23 18:33:49 stiffy kernel: Socket status: 30000010
Nov 23 18:33:49 stiffy kernel: pcmcia: parent PCI bridge I/O window: 0xe000 - 0xffff
Nov 23 18:33:49 stiffy kernel: cs: IO port probe 0xe000-0xffff: clean.
Nov 23 18:33:49 stiffy kernel: pcmcia: parent PCI bridge Memory window: 0xf4000000 - 0xfbffffff
Nov 23 18:33:49 stiffy kernel: pcmcia: parent PCI bridge Memory window: 0x30000000 - 0x34ffffff
Nov 23 18:33:49 stiffy kernel: ACPI: PCI Interrupt 0000:02:01.1[A] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
Nov 23 18:33:49 stiffy kernel: Yenta: CardBus bridge found at 0000:02:01.1 [1028:00d4]
Nov 23 18:33:49 stiffy kernel: Yenta: Using CSCINT to route CSC interrupts to PCI
Nov 23 18:33:49 stiffy kernel: Yenta: Routing CardBus interrupts to PCI
Nov 23 18:33:49 stiffy kernel: Yenta TI: socket 0000:02:01.1, mfunc 0x05033002, devctl 0x64
Nov 23 18:33:49 stiffy kernel: Floppy drive(s): fd0 is 1.44M
Nov 23 18:33:49 stiffy kernel: FDC 0 is a post-1991 82077
Nov 23 18:33:49 stiffy kernel: Yenta: ISA IRQ mask 0x0498, PCI irq 11
Nov 23 18:33:49 stiffy kernel: Socket status: 30000006
Nov 23 18:33:49 stiffy kernel: pcmcia: parent PCI bridge I/O window: 0xe000 - 0xffff
Nov 23 18:33:49 stiffy kernel: cs: IO port probe 0xe000-0xffff: clean.
Nov 23 18:33:49 stiffy kernel: pcmcia: parent PCI bridge Memory window: 0xf4000000 - 0xfbffffff
Nov 23 18:33:49 stiffy kernel: pcmcia: parent PCI bridge Memory window: 0x30000000 - 0x34ffffff
Nov 23 18:33:49 stiffy kernel: pccard: PCMCIA card inserted into slot 0
Nov 23 18:33:49 stiffy kernel: input: ImPS/2 Generic Wheel Mouse as /class/input/input1
Nov 23 18:33:49 stiffy kernel: input: PC Speaker as /class/input/input2
Nov 23 18:33:49 stiffy kernel: parport: PnPBIOS parport detected.
Nov 23 18:33:49 stiffy kernel: parport0: PC-style at 0x378 (0x778), irq 7, dma 1 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
Nov 23 18:33:49 stiffy kernel: ACPI: PCI Interrupt 0000:02:01.2[A] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
Nov 23 18:33:49 stiffy kernel: ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[11] MMIO=[f8fff000-f8fff7ff] Max Packet=[2048]
Nov 23 18:33:49 stiffy kernel: ACPI: PCI Interrupt 0000:00:1f.5[B] -> Link [LNKB] -> GSI 5 (level, low) -> IRQ 5
Nov 23 18:33:49 stiffy kernel: intel8x0_measure_ac97_clock: measured 50398 usecs
Nov 23 18:33:49 stiffy kernel: intel8x0: clocking to 48000
Nov 23 18:33:49 stiffy kernel: ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [LNKB] -> GSI 5 (level, low) -> IRQ 5
Nov 23 18:33:49 stiffy kernel: MC'97 1 converters and GPIO not ready (0xff00)
Nov 23 18:33:49 stiffy kernel: SCSI subsystem initialized
Nov 23 18:33:49 stiffy kernel: Initializing USB Mass Storage driver...
Nov 23 18:33:49 stiffy kernel: scsi0 : SCSI emulation for USB Mass Storage devices
Nov 23 18:33:49 stiffy kernel: usbcore: registered new driver usb-storage
Nov 23 18:33:49 stiffy kernel: USB Mass Storage support registered.
Nov 23 18:33:49 stiffy kernel: eth1394: eth1: IEEE-1394 IPv4 over 1394 Ethernet (fw-host0)
Nov 23 18:33:49 stiffy kernel: Vendor: IC25N040 Model: ATCS04-0 Rev: CA4O
Nov 23 18:33:49 stiffy kernel: Type: Direct-Access ANSI SCSI revision: 00
Nov 23 18:33:49 stiffy kernel: SCSI device sda: 78140160 512-byte hdwr sectors (40008 MB)
Nov 23 18:33:49 stiffy kernel: SCSI device sda: 78140160 512-byte hdwr sectors (40008 MB)
Nov 23 18:33:49 stiffy kernel: sda: sda1
Nov 23 18:33:49 stiffy kernel: sd 0:0:0:0: Attached scsi disk sda
Nov 23 18:33:49 stiffy kernel: Adding 1461872k swap on /dev/hda8. Priority:-1 extents:1 across:1461872k
Nov 23 18:33:49 stiffy kernel: mice: PS/2 mouse device common for all mice
Nov 23 18:33:49 stiffy kernel: usbcore: registered new driver usbmouse
Nov 23 18:33:49 stiffy kernel: drivers/usb/input/usbmouse.c: v1.6:USB HID Boot Protocol mouse driver
Nov 23 18:33:49 stiffy kernel: Dell laptop SMM driver v1.14 21/02/2005 Massimo Dal Zotto ([email protected])
Nov 23 18:33:49 stiffy kernel: Bluetooth: Core ver 2.8
Nov 23 18:33:49 stiffy kernel: NET: Registered protocol family 31
Nov 23 18:33:49 stiffy kernel: Bluetooth: HCI device and connection manager initialized
Nov 23 18:33:49 stiffy kernel: Bluetooth: HCI socket layer initialized
Nov 23 18:33:49 stiffy kernel: Bluetooth: L2CAP ver 2.8
Nov 23 18:33:49 stiffy kernel: Bluetooth: L2CAP socket layer initialized
Nov 23 18:33:49 stiffy kernel: Bluetooth: HIDP (Human Interface Emulation) ver 1.1
Nov 23 18:33:49 stiffy kernel: Bluetooth: RFCOMM socket layer initialized
Nov 23 18:33:49 stiffy kernel: Bluetooth: RFCOMM TTY layer initialized
Nov 23 18:33:49 stiffy kernel: Bluetooth: RFCOMM ver 1.6
Nov 23 18:33:49 stiffy kernel: Bluetooth: HCI UART driver ver 2.2
Nov 23 18:33:49 stiffy kernel: Bluetooth: HCI H4 protocol initialized
Nov 23 18:33:49 stiffy kernel: Bluetooth: HCI BCSP protocol initialized
Nov 23 18:33:49 stiffy kernel: NET: Registered protocol family 23
Nov 23 18:33:49 stiffy kernel: IrCOMM protocol (Dag Brattli)
Nov 23 18:33:49 stiffy kernel: EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended
Nov 23 18:33:49 stiffy kernel: ReiserFS: hda6: found reiserfs format "3.6" with standard journal
Nov 23 18:33:49 stiffy kernel: ReiserFS: hda6: using ordered data mode
Nov 23 18:33:49 stiffy kernel: ReiserFS: hda6: journal params: device hda6, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
Nov 23 18:33:49 stiffy kernel: ReiserFS: hda6: checking transaction log (hda6)
Nov 23 18:33:49 stiffy kernel: ReiserFS: hda6: Using r5 hash to sort names
Nov 23 18:33:49 stiffy kernel: ReiserFS: hda5: found reiserfs format "3.6" with standard journal
Nov 23 18:33:49 stiffy kernel: ReiserFS: hda5: using ordered data mode
Nov 23 18:33:49 stiffy kernel: ReiserFS: hda5: journal params: device hda5, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
Nov 23 18:33:49 stiffy kernel: ReiserFS: hda5: checking transaction log (hda5)
Nov 23 18:33:49 stiffy kernel: ReiserFS: hda5: Using r5 hash to sort names
Nov 23 18:33:50 stiffy kernel: ReiserFS: sda1: found reiserfs format "3.6" with standard journal
Nov 23 18:33:51 stiffy kernel: ReiserFS: sda1: using ordered data mode
Nov 23 18:33:53 stiffy kernel: ReiserFS: sda1: journal params: device sda1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
Nov 23 18:33:53 stiffy kernel: ReiserFS: sda1: checking transaction log (sda1)
Nov 23 18:33:55 stiffy kernel: ReiserFS: sda1: Using r5 hash to sort names
Nov 23 18:33:55 stiffy kernel: ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
Nov 23 18:33:56 stiffy kernel: cs: memory probe 0xf4000000-0xfbffffff: excluding 0xf4000000-0xf8ffffff
Nov 23 18:33:57 stiffy kernel: pcmcia: registering new device pcmcia0.0
Nov 23 18:33:57 stiffy kernel: pcmcia: Detected deprecated PCMCIA ioctl usage.
Nov 23 18:33:57 stiffy kernel: pcmcia: This interface will soon be removed from the kernel; please expect breakage unless you upgrade to new tools.
Nov 23 18:33:58 stiffy kernel: pcmcia: see http://www.kernel.org/pub/linux/utils/kernel/pcmcia/pcmcia.html for details.
Nov 23 18:33:59 stiffy kernel: cs: IO port probe 0x100-0x4ff: excluding 0x170-0x177 0x280-0x287 0x370-0x37f
Nov 23 18:33:59 stiffy kernel: cs: IO port probe 0x100-0x4ff: excluding 0x170-0x177 0x280-0x287 0x370-0x37f
Nov 23 18:33:59 stiffy kernel: cs: IO port probe 0x800-0x8ff: clean.
Nov 23 18:33:59 stiffy kernel: cs: IO port probe 0x800-0x8ff: clean.
Nov 23 18:33:59 stiffy kernel: cs: IO port probe 0xc00-0xcff: clean.
Nov 23 18:33:59 stiffy kernel: cs: IO port probe 0xc00-0xcff: clean.
Nov 23 18:33:59 stiffy kernel: cs: IO port probe 0xa00-0xaff: clean.
Nov 23 18:33:59 stiffy kernel: cs: IO port probe 0xa00-0xaff: clean.
Nov 23 18:33:59 stiffy kernel: ttyS2: detected caps 00000700 should be 00000100
Nov 23 18:34:00 stiffy kernel: 0.0: ttyS2 at I/O 0xe100 (irq = 3) is a 16C950/954
Nov 23 18:34:01 stiffy kernel: 0.0: ttyS3 at I/O 0xe108 (irq = 3) is a 8250
Nov 23 18:34:01 stiffy kernel: ip_conntrack version 2.4 (4095 buckets, 32760 max) - 212 bytes per conntrack
Nov 23 18:34:01 stiffy kernel: ip_tables: (C) 2000-2002 Netfilter core team
Nov 23 18:34:01 stiffy kernel: [schedule+1453/1679] schedule+0x5ad/0x68f
Nov 23 18:34:01 stiffy kernel: [__wake_up_common+60/94] __wake_up_common+0x3c/0x5e
Nov 23 18:34:01 stiffy kernel: [wait_for_completion+134/242] wait_for_completion+0x86/0xf2
Nov 23 18:34:01 stiffy kernel: [default_wake_function+0/18] default_wake_function+0x0/0x12
Nov 23 18:34:01 stiffy kernel: [call_usermodehelper_keys+175/186] call_usermodehelper_keys+0xaf/0xba
Nov 23 18:34:01 stiffy kernel: [__call_usermodehelper+0/110] __call_usermodehelper+0x0/0x6e
Nov 23 18:34:01 stiffy kernel: [request_module+175/240] request_module+0xaf/0xf0
Nov 23 18:34:01 stiffy kernel: [buffered_rmqueue+241/514] buffered_rmqueue+0xf1/0x202
Nov 23 18:34:01 stiffy kernel: [get_page_from_freelist+136/162] get_page_from_freelist+0x88/0xa2
Nov 23 18:34:01 stiffy kernel: [pg0+553595222/1069659136] translate_table+0x95f/0xbcb [ip_tables]
Nov 23 18:34:01 stiffy kernel: [map_vm_area+109/149] map_vm_area+0x6d/0x95
Nov 23 18:34:01 stiffy kernel: [__vmalloc_area_node+246/362] __vmalloc_area_node+0xf6/0x16a
Nov 23 18:34:01 stiffy kernel: [__vmalloc_node+79/110] __vmalloc_node+0x4f/0x6e
Nov 23 18:34:01 stiffy kernel: [__vmalloc+39/43] __vmalloc+0x27/0x2b
Nov 23 18:34:01 stiffy kernel: [pg0+553597367/1069659136] do_replace+0x145/0x6d6 [ip_tables]
Nov 23 18:34:03 stiffy kernel: [pg0+553596209/1069659136] copy_entries_to_user+0xaf/0x1e3 [ip_tables]
Nov 23 18:34:04 stiffy kernel: [pg0+553599347/1069659136] do_ipt_set_ctl+0x1e/0x62 [ip_tables]
Nov 23 18:34:04 stiffy kernel: [nf_sockopt+198/277] nf_sockopt+0xc6/0x115
Nov 23 18:34:04 stiffy kernel: [nf_setsockopt+55/59] nf_setsockopt+0x37/0x3b
Nov 23 18:34:04 stiffy kernel: [ip_setsockopt+219/3448] ip_setsockopt+0xdb/0xd78
Nov 23 18:34:04 stiffy kernel: [nf_sockopt+136/277] nf_sockopt+0x88/0x115
Nov 23 18:34:04 stiffy kernel: [nf_getsockopt+55/59] nf_getsockopt+0x37/0x3b
Nov 23 18:34:04 stiffy kernel: [ip_getsockopt+254/1764] ip_getsockopt+0xfe/0x6e4
Nov 23 18:34:04 stiffy kernel: [prio_tree_remove+150/191] prio_tree_remove+0x96/0xbf
Nov 23 18:34:04 stiffy kernel: [free_pgtables+59/167] free_pgtables+0x3b/0xa7
Nov 23 18:34:04 stiffy kernel: [buffered_rmqueue+241/514] buffered_rmqueue+0xf1/0x202
Nov 23 18:34:04 stiffy kernel: [get_page_from_freelist+136/162] get_page_from_freelist+0x88/0xa2
Nov 23 18:34:04 stiffy irattach: executing: 'echo stiffy > /proc/sys/net/irda/devname'
Nov 23 18:34:04 stiffy kernel: [__alloc_pages+88/816] __alloc_pages+0x58/0x330
Nov 23 18:34:04 stiffy kernel: [do_no_page+424/681] do_no_page+0x1a8/0x2a9
Nov 23 18:34:04 stiffy kernel: [do_anonymous_page+340/388] do_anonymous_page+0x154/0x184
Nov 23 18:34:04 stiffy irattach: executing: 'echo 1 > /proc/sys/net/irda/discovery'
Nov 23 18:34:05 stiffy kernel: [sys_setsockopt+96/158] sys_setsockopt+0x60/0x9e
Nov 23 18:34:05 stiffy irattach: Starting device irda0
Nov 23 18:34:05 stiffy kernel: [sys_socketcall+571/675] sys_socketcall+0x23b/0x2a3
Nov 23 18:34:05 stiffy kernel: [syscall_call+7/11] syscall_call+0x7/0xb
Nov 23 18:34:08 stiffy kernel: [schedule+1453/1679] schedule+0x5ad/0x68f
Nov 23 18:34:08 stiffy kernel: [__wake_up_common+60/94] __wake_up_common+0x3c/0x5e
Nov 23 18:34:08 stiffy kernel: [wait_for_completion+134/242] wait_for_completion+0x86/0xf2
Nov 23 18:34:08 stiffy kernel: [default_wake_function+0/18] default_wake_function+0x0/0x12
Nov 23 18:34:08 stiffy kernel: [call_usermodehelper_keys+175/186] call_usermodehelper_keys+0xaf/0xba
Nov 23 18:34:08 stiffy kernel: [__call_usermodehelper+0/110] __call_usermodehelper+0x0/0x6e
Nov 23 18:34:08 stiffy kernel: [request_module+175/240] request_module+0xaf/0xf0
Nov 23 18:34:08 stiffy kernel: [get_page_from_freelist+136/162] get_page_from_freelist+0x88/0xa2
Nov 23 18:34:08 stiffy kernel: [pg0+553595222/1069659136] translate_table+0x95f/0xbcb [ip_tables]
Nov 23 18:34:08 stiffy kernel: [map_vm_area+109/149] map_vm_area+0x6d/0x95
Nov 23 18:34:08 stiffy kernel: [__vmalloc_area_node+246/362] __vmalloc_area_node+0xf6/0x16a
Nov 23 18:34:08 stiffy kernel: [__vmalloc_node+79/110] __vmalloc_node+0x4f/0x6e
Nov 23 18:34:08 stiffy kernel: [__vmalloc+39/43] __vmalloc+0x27/0x2b
Nov 23 18:34:08 stiffy kernel: [pg0+553597367/1069659136] do_replace+0x145/0x6d6 [ip_tables]
Nov 23 18:34:08 stiffy kernel: [pg0+553596209/1069659136] copy_entries_to_user+0xaf/0x1e3 [ip_tables]
Nov 23 18:34:08 stiffy kernel: [pg0+553599347/1069659136] do_ipt_set_ctl+0x1e/0x62 [ip_tables]
Nov 23 18:34:08 stiffy kernel: [nf_sockopt+198/277] nf_sockopt+0xc6/0x115
Nov 23 18:34:08 stiffy kernel: [nf_setsockopt+55/59] nf_setsockopt+0x37/0x3b
Nov 23 18:34:08 stiffy kernel: [ip_setsockopt+219/3448] ip_setsockopt+0xdb/0xd78
Nov 23 18:34:08 stiffy kernel: [nf_sockopt+136/277] nf_sockopt+0x88/0x115
Nov 23 18:34:09 stiffy kernel: [nf_getsockopt+55/59] nf_getsockopt+0x37/0x3b
Nov 23 18:34:09 stiffy kernel: [ip_getsockopt+254/1764] ip_getsockopt+0xfe/0x6e4
Nov 23 18:34:09 stiffy kernel: [prio_tree_remove+150/191] prio_tree_remove+0x96/0xbf
Nov 23 18:34:09 stiffy kernel: [free_pgtables+59/167] free_pgtables+0x3b/0xa7
Nov 23 18:34:09 stiffy kernel: [buffered_rmqueue+241/514] buffered_rmqueue+0xf1/0x202
Nov 23 18:34:10 stiffy kernel: [find_get_page+39/95] find_get_page+0x27/0x5f
Nov 23 18:34:11 stiffy kernel: [filemap_nopage+389/1013] filemap_nopage+0x185/0x3f5
Nov 23 18:34:12 stiffy kernel: [page_add_file_rmap+66/78] page_add_file_rmap+0x42/0x4e
Nov 23 18:34:12 stiffy kernel: [do_no_page+424/681] do_no_page+0x1a8/0x2a9
Nov 23 18:34:12 stiffy kernel: [sys_setsockopt+96/158] sys_setsockopt+0x60/0x9e
Nov 23 18:34:12 stiffy kernel: [sys_socketcall+571/675] sys_socketcall+0x23b/0x2a3
Nov 23 18:34:12 stiffy kernel: [syscall_call+7/11] syscall_call+0x7/0xb
Nov 23 18:34:13 stiffy kernel: [schedule+1453/1679] schedule+0x5ad/0x68f
Nov 23 18:34:13 stiffy kernel: [__wake_up_common+60/94] __wake_up_common+0x3c/0x5e
Nov 23 18:34:13 stiffy kernel: [wait_for_completion+134/242] wait_for_completion+0x86/0xf2
Nov 23 18:34:13 stiffy kernel: [default_wake_function+0/18] default_wake_function+0x0/0x12
Nov 23 18:34:13 stiffy irattach: Stopping device /dev/ttyS1
Nov 23 18:34:13 stiffy kernel: [call_usermodehelper_keys+175/186] call_usermodehelper_keys+0xaf/0xba
Nov 23 18:34:13 stiffy irattach: ioctl(SIOCGIFFLAGS): No such device
Nov 23 18:34:13 stiffy kernel: [__call_usermodehelper+0/110] __call_usermodehelper+0x0/0x6e
Nov 23 18:34:13 stiffy kernel: [request_module+175/240] request_module+0xaf/0xf0
Nov 23 18:34:13 stiffy irattach: exiting ...
Nov 23 18:34:13 stiffy kernel: [buffered_rmqueue+241/514] buffered_rmqueue+0xf1/0x202
Nov 23 18:34:13 stiffy kernel: [get_page_from_freelist+136/162] get_page_from_freelist+0x88/0xa2
Nov 23 18:34:13 stiffy kernel: [pg0+553594963/1069659136] translate_table+0x85c/0xbcb [ip_tables]
Nov 23 18:34:13 stiffy kernel: [__vmalloc_node+79/110] __vmalloc_node+0x4f/0x6e
Nov 23 18:34:13 stiffy kernel: [__vmalloc+39/43] __vmalloc+0x27/0x2b
Nov 23 18:34:13 stiffy kernel: [pg0+553597367/1069659136] do_replace+0x145/0x6d6 [ip_tables]
Nov 23 18:34:13 stiffy kernel: [pg0+553596209/1069659136] copy_entries_to_user+0xaf/0x1e3 [ip_tables]
Nov 23 18:34:13 stiffy kernel: [pg0+553599347/1069659136] do_ipt_set_ctl+0x1e/0x62 [ip_tables]
Nov 23 18:34:13 stiffy kernel: [nf_sockopt+198/277] nf_sockopt+0xc6/0x115
Nov 23 18:34:14 stiffy kernel: [nf_setsockopt+55/59] nf_setsockopt+0x37/0x3b
Nov 23 18:34:14 stiffy kernel: [ip_setsockopt+219/3448] ip_setsockopt+0xdb/0xd78
Nov 23 18:34:14 stiffy kernel: [nf_sockopt+136/277] nf_sockopt+0x88/0x115
Nov 23 18:34:14 stiffy kernel: [nf_getsockopt+55/59] nf_getsockopt+0x37/0x3b
Nov 23 18:34:14 stiffy kernel: [ip_getsockopt+254/1764] ip_getsockopt+0xfe/0x6e4
Nov 23 18:34:14 stiffy kernel: [prio_tree_remove+150/191] prio_tree_remove+0x96/0xbf
Nov 23 18:34:14 stiffy kernel: [buffered_rmqueue+241/514] buffered_rmqueue+0xf1/0x202
Nov 23 18:34:14 stiffy kernel: [buffered_rmqueue+241/514] buffered_rmqueue+0xf1/0x202
Nov 23 18:34:14 stiffy kernel: [get_page_from_freelist+136/162] get_page_from_freelist+0x88/0xa2
Nov 23 18:34:14 stiffy kernel: [__alloc_pages+88/816] __alloc_pages+0x58/0x330
Nov 23 18:34:14 stiffy kernel: [do_no_page+424/681] do_no_page+0x1a8/0x2a9
Nov 23 18:34:14 stiffy kernel: [do_anonymous_page+340/388] do_anonymous_page+0x154/0x184
Nov 23 18:34:14 stiffy kernel: [sys_setsockopt+96/158] sys_setsockopt+0x60/0x9e
Nov 23 18:34:14 stiffy kernel: [sys_socketcall+571/675] sys_socketcall+0x23b/0x2a3
Nov 23 18:34:14 stiffy kernel: [syscall_call+7/11] syscall_call+0x7/0xb
Nov 23 18:34:14 stiffy kernel: IA-32 Microcode Update Driver: v1.14 <[email protected]>
Nov 23 18:34:14 stiffy kernel: microcode: CPU0 updated from revision 0x9 to 0x20, date = 06052003
Nov 23 18:34:14 stiffy kernel: IA-32 Microcode Update Driver v1.14 unregistered
Nov 23 18:34:14 stiffy kernel: NET: Registered protocol family 10
Nov 23 18:34:15 stiffy kernel: Disabled Privacy Extensions on device c0341f20(lo)
Nov 23 18:34:16 stiffy kernel: IPv6 over IPv4 tunneling driver
Nov 23 18:34:17 stiffy kernel: ACPI: Battery Slot [BAT0] (battery present)
Nov 23 18:34:17 stiffy kernel: ACPI: Battery Slot [BAT1] (battery present)
Nov 23 18:34:17 stiffy kernel: ACPI: AC Adapter [AC] (on-line)
Nov 23 18:34:17 stiffy kernel: ACPI: CPU0 (power states: C1[C1] C2[C2])
Nov 23 18:34:17 stiffy kernel: ACPI: Processor [CPU0] (supports 8 throttling states)
Nov 23 18:34:17 stiffy kernel: ACPI: Lid Switch [LID]
Nov 23 18:34:17 stiffy kernel: ACPI: Power Button (CM) [PBTN]
Nov 23 18:34:17 stiffy kernel: ACPI: Sleep Button (CM) [SBTN]
Nov 23 18:34:17 stiffy kernel: ACPI: Thermal Zone [THM] (58 C)
Nov 23 18:34:21 stiffy kernel: psmouse.c: Wheel Mouse at isa0060/serio1/input0 lost synchronization, throwing 1 bytes away.
Nov 23 18:35:38 stiffy gconfd (marc-6570): (Version 2.12.1) wird gestartet, Prozesskennung 6570, Benutzer ?marc?
Nov 23 18:35:38 stiffy gconfd (marc-6570): Die Adresse ?xml:readonly:/etc/gconf/gconf.xml.mandatory? wurde an der Position 0 zu einer nur lesbaren Konfigurationsquelle aufgel?st
Nov 23 18:35:38 stiffy gconfd (marc-6570): Die Adresse ?xml:readwrite:/home/marc/.gconf? wurde an der Position 1 zu einer schreibbaren Konfigurationsquelle aufgel?st
Nov 23 18:35:38 stiffy gconfd (marc-6570): Die Adresse ?xml:readonly:/etc/gconf/gconf.xml.defaults? wurde an der Position 2 zu einer nur lesbaren Konfigurationsquelle aufgel?st
Nov 23 18:35:38 stiffy gconfd (marc-6570): Die Adresse ?xml:readonly:/var/lib/gconf/debian.defaults? wurde an der Position 3 zu einer nur lesbaren Konfigurationsquelle aufgel?st
Nov 23 18:35:38 stiffy gconfd (marc-6570): Die Adresse ?xml:readonly:/var/lib/gconf/defaults? wurde an der Position 4 zu einer nur lesbaren Konfigurationsquelle aufgel?st
Nov 23 18:36:10 stiffy kernel: psmouse.c: resync failed, issuing reconnect request
Nov 23 18:36:13 stiffy gconfd (marc-6570): Die Adresse ?xml:readwrite:/home/marc/.gconf? wurde an der Position 0 zu einer schreibbaren Konfigurationsquelle aufgel?st
Nov 23 18:36:21 stiffy kernel: psmouse.c: Wheel Mouse at isa0060/serio1/input0 lost synchronization, throwing 1 bytes away.
Nov 23 18:36:39 stiffy gconfd (marc-6570): Beenden
Nov 23 18:36:41 stiffy shutdown[5698]: shutting down for system reboot
Nov 23 18:36:49 stiffy kernel: Kernel logging (proc) stopped.
Nov 23 18:36:49 stiffy kernel: Kernel log daemon terminating.
Nov 23 18:36:49 stiffy exiting on signal 15
Michal Piotrowski <[email protected]> wrote:
>
> Debug: sleeping function called from invalid context at
> include/asm/semaphore.h:123
> in_atomic():1, irqs_disabled():0
> [<c0103be6>] dump_stack+0x17/0x19
> [<c011a0c3>] __might_sleep+0x9c/0xae
> [<fd9a090d>] translate_table+0x147/0xc14 [ip_tables]
> [<fd9a2b2a>] ipt_register_table+0x93/0x20d [ip_tables]
> [<f98fe027>] init+0x27/0x9e [iptable_filter]
> [<c01376d0>] sys_init_module+0xd7/0x26c
> [<c0102cc7>] sysenter_past_esp+0x54/0x75
> ---------------------------
> | preempt count: 00000001 ]
> | 1 level deep critical section nesting:
> ----------------------------------------
> .. [<fd9a2aca>] .... ipt_register_table+0x33/0x20d [ip_tables]
> .....[<f98fe027>] .. ( <= init+0x27/0x9e [iptable_filter])
>
ipt_register_table() does get_cpu() then calls translate_table(), and
somewhere under translate_table() we do something which sleeps, only I'm not
sure what it is - netfilter likes to hide things in unexpected places.
check_entry() will do sleepy things under that get_cpu(), but that doesn't
seem to be in this particular call chain.
Anyway, the new get_cpu() in ipt_register_table() is the problem.
On 11/24/05, Marc Koschewski <[email protected]> wrote:
> Just booted into 2.6.15-rc2-mm1. The 'mouse problem' (as reported earlier) still
> persists, moreover, some stuff's now really not gonna work anymore. I logged in
> via gdm once and rebooted.
>
> Ragards,
> Marc
>
Mouse problem is userspace. See bug 340202 on the Debian site.
Ian
--
Ian McDonald
http://wand.net.nz/~iam4
WAND Network Research Group
University of Waikato
New Zealand
Marc Koschewski <[email protected]> wrote:
>
> * Andrew Morton <[email protected]> [2005-11-23 03:35:50 -0800]:
>
> >
> > ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.15-rc2/2.6.15-rc2-mm1/
> >
> > (temp copy at http://www.zip.com.au/~akpm/linux/patches/stuff/2.6.15-rc2-mm1.gz)
> >
> > - Added git-sym2.patch to the -mm lineup: updates to the sym2 scsi driver
> > (Matthew Wilcox).
> >
> > - The JSM tty driver still doesn't compile.
> >
> > - The git-powerpc tree is included now.
>
> Just booted into 2.6.15-rc2-mm1. The 'mouse problem' (as reported earlier) still
> persists,
You'l probably need to re-report the mouse problem if the previous report
didn't get any action.
> moreover, some stuff's now really not gonna work anymore. I logged in
> via gdm once and rebooted.
Yes, netfilter broke.
> ...
> Nov 23 18:34:01 stiffy kernel: 0.0: ttyS3 at I/O 0xe108 (irq = 3) is a 8250
> Nov 23 18:34:01 stiffy kernel: ip_conntrack version 2.4 (4095 buckets, 32760 max) - 212 bytes per conntrack
> Nov 23 18:34:01 stiffy kernel: ip_tables: (C) 2000-2002 Netfilter core team
> Nov 23 18:34:01 stiffy kernel: [schedule+1453/1679] schedule+0x5ad/0x68f
> Nov 23 18:34:01 stiffy kernel: [__wake_up_common+60/94] __wake_up_common+0x3c/0x5e
> Nov 23 18:34:01 stiffy kernel: [wait_for_completion+134/242] wait_for_completion+0x86/0xf2
> Nov 23 18:34:01 stiffy kernel: [default_wake_function+0/18] default_wake_function+0x0/0x12
> Nov 23 18:34:01 stiffy kernel: [call_usermodehelper_keys+175/186] call_usermodehelper_keys+0xaf/0xba
> Nov 23 18:34:01 stiffy kernel: [__call_usermodehelper+0/110] __call_usermodehelper+0x0/0x6e
> Nov 23 18:34:01 stiffy kernel: [request_module+175/240] request_module+0xaf/0xf0
> Nov 23 18:34:01 stiffy kernel: [buffered_rmqueue+241/514] buffered_rmqueue+0xf1/0x202
> Nov 23 18:34:01 stiffy kernel: [get_page_from_freelist+136/162] get_page_from_freelist+0x88/0xa2
> Nov 23 18:34:01 stiffy kernel: [pg0+553595222/1069659136] translate_table+0x95f/0xbcb [ip_tables]
> Nov 23 18:34:01 stiffy kernel: [map_vm_area+109/149] map_vm_area+0x6d/0x95
> Nov 23 18:34:01 stiffy kernel: [__vmalloc_area_node+246/362] __vmalloc_area_node+0xf6/0x16a
> Nov 23 18:34:01 stiffy kernel: [__vmalloc_node+79/110] __vmalloc_node+0x4f/0x6e
> Nov 23 18:34:01 stiffy kernel: [__vmalloc+39/43] __vmalloc+0x27/0x2b
> Nov 23 18:34:01 stiffy kernel: [pg0+553597367/1069659136] do_replace+0x145/0x6d6 [ip_tables]
> Nov 23 18:34:03 stiffy kernel: [pg0+553596209/1069659136] copy_entries_to_user+0xaf/0x1e3 [ip_tables]
> Nov 23 18:34:04 stiffy kernel: [pg0+553599347/1069659136] do_ipt_set_ctl+0x1e/0x62 [ip_tables]
> Nov 23 18:34:04 stiffy kernel: [nf_sockopt+198/277] nf_sockopt+0xc6/0x115
> Nov 23 18:34:04 stiffy kernel: [nf_setsockopt+55/59] nf_setsockopt+0x37/0x3b
> Nov 23 18:34:04 stiffy kernel: [ip_setsockopt+219/3448] ip_setsockopt+0xdb/0xd78
> Nov 23 18:34:04 stiffy kernel: [nf_sockopt+136/277] nf_sockopt+0x88/0x115
> Nov 23 18:34:04 stiffy kernel: [nf_getsockopt+55/59] nf_getsockopt+0x37/0x3b
> Nov 23 18:34:04 stiffy kernel: [ip_getsockopt+254/1764] ip_getsockopt+0xfe/0x6e4
> Nov 23 18:34:04 stiffy kernel: [prio_tree_remove+150/191] prio_tree_remove+0x96/0xbf
> Nov 23 18:34:04 stiffy kernel: [free_pgtables+59/167] free_pgtables+0x3b/0xa7
> Nov 23 18:34:04 stiffy kernel: [buffered_rmqueue+241/514] buffered_rmqueue+0xf1/0x202
> Nov 23 18:34:04 stiffy kernel: [get_page_from_freelist+136/162] get_page_from_freelist+0x88/0xa2
> ...
* Ian McDonald <[email protected]> [2005-11-24 08:33:36 +1300]:
> On 11/24/05, Marc Koschewski <[email protected]> wrote:
> > Just booted into 2.6.15-rc2-mm1. The 'mouse problem' (as reported earlier) still
> > persists, moreover, some stuff's now really not gonna work anymore. I logged in
> > via gdm once and rebooted.
> >
> > Ragards,
> > Marc
> >
>
> Mouse problem is userspace. See bug 340202 on the Debian site.
>
> Ian
===
Package: udev
Version: 0.074-3
Severity: critical
Justification: breaks the whole system
When running Linux 2.6.15-rc1+, the new nested class devices used by the
input class prevent /dev/input/ from being created, rendering X
unusable.
===
The problem over here exists _only_ in the -mm series, not plain 2.6.15-rc1
or 2.6.15-rc2. What's up then!? I use udev 0.74-3 as well. Mysterious...
marc@stiffy:~$ uname -a
Linux stiffy 2.6.15-rc2-marc #1 PREEMPT Sun Nov 20 22:09:22 CET 2005 i686 GNU/Linux
marc@stiffy:~$
Regards,
Marc
On Wed, Nov 23, 2005 at 08:50:54PM +0100, Marc Koschewski wrote:
> * Ian McDonald <[email protected]> [2005-11-24 08:33:36 +1300]:
>
> > On 11/24/05, Marc Koschewski <[email protected]> wrote:
> > > Just booted into 2.6.15-rc2-mm1. The 'mouse problem' (as reported earlier) still
> > > persists, moreover, some stuff's now really not gonna work anymore. I logged in
> > > via gdm once and rebooted.
> > >
> > > Ragards,
> > > Marc
> > >
> >
> > Mouse problem is userspace. See bug 340202 on the Debian site.
> >
> > Ian
>
> ===
> Package: udev
> Version: 0.074-3
> Severity: critical
> Justification: breaks the whole system
>
>
> When running Linux 2.6.15-rc1+, the new nested class devices used by the
> input class prevent /dev/input/ from being created, rendering X
> unusable.
> ===
>
> The problem over here exists _only_ in the -mm series, not plain 2.6.15-rc1
> or 2.6.15-rc2. What's up then!? I use udev 0.74-3 as well. Mysterious...
It's a userspace issue as to how udev is creating the initial device
nodes in Debian.
Odd that this only shows up in the -mm releases, as it should also show
up for you in the -rc1 and -rc2 kernels.
thanks,
greg k-h
On Wed, Nov 23, 2005 at 03:35:50AM -0800, Andrew Morton wrote:
>
> ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.15-rc2/2.6.15-rc2-mm1/
>
> (temp copy at http://www.zip.com.au/~akpm/linux/patches/stuff/2.6.15-rc2-mm1.gz)
>
> - Added git-sym2.patch to the -mm lineup: updates to the sym2 scsi driver
> (Matthew Wilcox).
>
> - The JSM tty driver still doesn't compile.
>
> - The git-powerpc tree is included now.
>
I have undefined symbols (since rc1-mm1 i think):
net/ipv4/netfilter/ip_conntrack_netlink.c: In function 'ctnetlink_dump_table':
net/ipv4/netfilter/ip_conntrack_netlink.c:409: warning: implicit declaration of function 'local_bh_disable'
net/ipv4/netfilter/ip_conntrack_netlink.c:427: warning: implicit declaration of function 'local_bh_enable'
I don't know if this is the best fix: since there are circular
dependencies, linux/interrupt.h cannot be included in
linux/spinlock_api_up.h so i thought the best i could do was to directly
include it in the C file.
Signed-off-by: Benoit Boissinot <[email protected]>
--- net/ipv4/netfilter/ip_conntrack_netlink.c.orig 2005-11-23 21:05:37.000000000 +0100
+++ net/ipv4/netfilter/ip_conntrack_netlink.c 2005-11-23 21:02:23.000000000 +0100
@@ -27,6 +27,7 @@
#include <linux/errno.h>
#include <linux/netlink.h>
#include <linux/spinlock.h>
+#include <linux/interrupt.h>
#include <linux/notifier.h>
#include <linux/netfilter.h>
* Greg KH <[email protected]> [2005-11-23 12:12:38 -0800]:
> On Wed, Nov 23, 2005 at 08:50:54PM +0100, Marc Koschewski wrote:
> > * Ian McDonald <[email protected]> [2005-11-24 08:33:36 +1300]:
> >
> > > On 11/24/05, Marc Koschewski <[email protected]> wrote:
> > > > Just booted into 2.6.15-rc2-mm1. The 'mouse problem' (as reported earlier) still
> > > > persists, moreover, some stuff's now really not gonna work anymore. I logged in
> > > > via gdm once and rebooted.
> > > >
> > > > Ragards,
> > > > Marc
> > > >
> > >
> > > Mouse problem is userspace. See bug 340202 on the Debian site.
> > >
> > > Ian
> >
> > ===
> > Package: udev
> > Version: 0.074-3
> > Severity: critical
> > Justification: breaks the whole system
> >
> >
> > When running Linux 2.6.15-rc1+, the new nested class devices used by the
> > input class prevent /dev/input/ from being created, rendering X
> > unusable.
> > ===
> >
> > The problem over here exists _only_ in the -mm series, not plain 2.6.15-rc1
> > or 2.6.15-rc2. What's up then!? I use udev 0.74-3 as well. Mysterious...
>
> It's a userspace issue as to how udev is creating the initial device
> nodes in Debian.
>
> Odd that this only shows up in the -mm releases, as it should also show
> up for you in the -rc1 and -rc2 kernels.
I'm impressed ... :/
Every inline dummy function should be static.
Signed-off-by: Adrian Bunk <[email protected]>
--- linux-2.6.15-rc2-mm1-full/init/main.c.old 2005-11-23 16:50:45.000000000 +0100
+++ linux-2.6.15-rc2-mm1-full/init/main.c 2005-11-23 16:50:55.000000000 +0100
@@ -101,7 +101,7 @@
static inline void acpi_early_init(void) { }
#endif
#ifndef CONFIG_DEBUG_RODATA
-inline void mark_rodata_ro(void) { }
+static inline void mark_rodata_ro(void) { }
#endif
#ifdef CONFIG_TC
On Wed, 23 Nov 2005, Adrian Bunk wrote:
> Every inline dummy function should be static.
Please explain why it matters in this case.
> Signed-off-by: Adrian Bunk <[email protected]>
>
> --- linux-2.6.15-rc2-mm1-full/init/main.c.old 2005-11-23 16:50:45.000000000 +0100
> +++ linux-2.6.15-rc2-mm1-full/init/main.c 2005-11-23 16:50:55.000000000 +0100
> @@ -101,7 +101,7 @@
> static inline void acpi_early_init(void) { }
> #endif
> #ifndef CONFIG_DEBUG_RODATA
> -inline void mark_rodata_ro(void) { }
> +static inline void mark_rodata_ro(void) { }
> #endif
>
> #ifdef CONFIG_TC
--
~Randy
On Wed, Nov 23, 2005 at 02:46:51PM -0800, Randy.Dunlap wrote:
> On Wed, 23 Nov 2005, Adrian Bunk wrote:
>
> > Every inline dummy function should be static.
>
> Please explain why it matters in this case.
We don't need an additional global copy of the function.
> > Signed-off-by: Adrian Bunk <[email protected]>
> >
> > --- linux-2.6.15-rc2-mm1-full/init/main.c.old 2005-11-23 16:50:45.000000000 +0100
> > +++ linux-2.6.15-rc2-mm1-full/init/main.c 2005-11-23 16:50:55.000000000 +0100
> > @@ -101,7 +101,7 @@
> > static inline void acpi_early_init(void) { }
> > #endif
> > #ifndef CONFIG_DEBUG_RODATA
> > -inline void mark_rodata_ro(void) { }
> > +static inline void mark_rodata_ro(void) { }
> > #endif
> >
> > #ifdef CONFIG_TC
>
> --
> ~Randy
cu
Adrian
--
"Is there not promise of rain?" Ling Tan asked suddenly out
of the darkness. There had been need of rain for many days.
"Only a promise," Lao Er said.
Pearl S. Buck - Dragon Seed
On Wed, 23 Nov 2005 03:35:50 -0800, Andrew Morton <[email protected]> wrote:
>
> ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.15-rc2/2.6.15-rc2-mm1/
>
> (temp copy at http://www.zip.com.au/~akpm/linux/patches/stuff/2.6.15-rc2-mm1.gz)
>
> - Added git-sym2.patch to the -mm lineup: updates to the sym2 scsi driver
> (Matthew Wilcox).
>
> - The JSM tty driver still doesn't compile.
>
> - The git-powerpc tree is included now.
>
Bad news :(.
It hangs when trying to start cups.
My initscripts just say "Loading USB printer module" and hang there.
No sysrq-t, no sysrq-b.
I suppose it tries to load usblp.
Any idea about the patch to blame ?
TIA
--
J.A. Magallon <jamagallon()able!es> \ Software is like sex:
werewolf!able!es \ It's better when it's free
Mandriva Linux release 2006.1 (Cooker) for i586
Linux 2.6.14-jam3 (gcc 4.0.2 (4.0.2-1mdk for Mandriva Linux release 2006.1))
"J.A. Magallon" <[email protected]> wrote:
>
> On Wed, 23 Nov 2005 03:35:50 -0800, Andrew Morton <[email protected]> wrote:
>
> >
> > ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.15-rc2/2.6.15-rc2-mm1/
> >
> > (temp copy at http://www.zip.com.au/~akpm/linux/patches/stuff/2.6.15-rc2-mm1.gz)
> >
> > - Added git-sym2.patch to the -mm lineup: updates to the sym2 scsi driver
> > (Matthew Wilcox).
> >
> > - The JSM tty driver still doesn't compile.
> >
> > - The git-powerpc tree is included now.
> >
>
> Bad news :(.
> It hangs when trying to start cups.
> My initscripts just say "Loading USB printer module" and hang there.
> No sysrq-t, no sysrq-b.
> I suppose it tries to load usblp.
You could try disabling cups and then run `modprobe usblp' when the system
is fully booted. Make sure that sysrq-t is generating stuff before doing
so.
> Any idea about the patch to blame ?
Not at this stage.
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Andrew Morton wrote:
> Marc Koschewski <[email protected]> wrote:
>>Just booted into 2.6.15-rc2-mm1. The 'mouse problem' (as reported earlier) still
>>persists,
>
> You'l probably need to re-report the mouse problem if the previous report
> didn't get any action.
I'm not certain whether this is the same 'mouse problem', but I'll
report the mouse problems I've been seeing. In the past several -mm
kernels, my touchpad has initially worked at boot, but 'tapping' has
stopped working at some point later (with no obvious kernel messages).
I've experienced this problem at least with 2.6.15-rc1-mm2 and
2.6.15-rc2-mm1, and reverting
input-attempt-to-re-synchronize-mouse-every-5-seconds.patch gives a
kernel without the touchpad problems.
Thanks,
Frank
- --
Frank Sorenson - KD7TZK
Systems Manager, Computer Science Department
Brigham Young University
[email protected]
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.1 (GNU/Linux)
Comment: Using GnuPG with Fedora - http://enigmail.mozdev.org
iD8DBQFDhSAuaI0dwg4A47wRAvzYAJ94ifBDBTm7MfVsbTOZE8QG3NjZUwCggHv0
SQvehLxz6pLHs+5J+jTeaKU=
=Pkg2
-----END PGP SIGNATURE-----
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.15-rc2-mm1
# Thu Nov 24 11:52:00 2005
#
CONFIG_X86_32=y
CONFIG_SEMAPHORE_SLEEPERS=y
CONFIG_X86=y
CONFIG_MMU=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
#
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SWAP_PREFETCH=y
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
CONFIG_AUDIT=y
CONFIG_AUDITSYSCALL=y
# CONFIG_IKCONFIG is not set
# CONFIG_CPUSETS is not set
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_DOUBLEFAULT=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
CONFIG_CC_ALIGN_FUNCTIONS=0
CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
CONFIG_SLAB=y
CONFIG_SERIAL_PCI=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_SLOB is not set
#
# Loadable module support
#
CONFIG_MODULES=y
# CONFIG_MODULE_UNLOAD is not set
CONFIG_OBSOLETE_MODPARM=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y
#
# Block layer
#
CONFIG_LBD=y
# CONFIG_BLK_DEV_IO_TRACE is not set
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
#
# Processor type and features
#
CONFIG_X86_PC=y
# CONFIG_X86_ELAN is not set
# CONFIG_X86_VOYAGER is not set
# CONFIG_X86_NUMAQ is not set
# CONFIG_X86_SUMMIT is not set
# CONFIG_X86_BIGSMP is not set
# CONFIG_X86_VISWS is not set
# CONFIG_X86_GENERICARCH is not set
# CONFIG_X86_ES7000 is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
CONFIG_MK7=y
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP2 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MGEODEGX1 is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
CONFIG_X86_GENERIC=y
CONFIG_X86_CMPXCHG=y
CONFIG_X86_XADD=y
CONFIG_X86_L1_CACHE_SHIFT=7
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_X86_CMPXCHG64=y
CONFIG_X86_GOOD_APIC=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_X86_USE_3DNOW=y
CONFIG_X86_TSC=y
# CONFIG_HPET_TIMER is not set
CONFIG_SMP=y
CONFIG_NR_CPUS=8
CONFIG_SCHED_SMT=y
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
CONFIG_PREEMPT_BKL=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_MCE=y
CONFIG_X86_MCE_NONFATAL=y
CONFIG_X86_MCE_P4THERMAL=y
# CONFIG_TOSHIBA is not set
# CONFIG_I8K is not set
# CONFIG_X86_REBOOTFIXUPS is not set
# CONFIG_MICROCODE is not set
# CONFIG_X86_MSR is not set
# CONFIG_X86_CPUID is not set
#
# Firmware Drivers
#
# CONFIG_EDD is not set
# CONFIG_DELL_RBU is not set
CONFIG_DCDBAS=m
# CONFIG_NOHIGHMEM is not set
CONFIG_HIGHMEM4G=y
# CONFIG_HIGHMEM64G is not set
CONFIG_HIGHMEM=y
CONFIG_NEED_NODE_MEMMAP_SIZE=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_SELECT_MEMORY_MODEL=y
# CONFIG_FLATMEM_MANUAL is not set
# CONFIG_DISCONTIGMEM_MANUAL is not set
CONFIG_SPARSEMEM_MANUAL=y
CONFIG_SPARSEMEM=y
CONFIG_HAVE_MEMORY_PRESENT=y
CONFIG_SPARSEMEM_STATIC=y
CONFIG_MEMORY_HOTPLUG=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_MIGRATION=y
CONFIG_HIGHPTE=y
# CONFIG_MATH_EMULATION is not set
CONFIG_MTRR=y
# CONFIG_EFI is not set
CONFIG_IRQBALANCE=y
# CONFIG_REGPARM is not set
CONFIG_SECCOMP=y
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
CONFIG_PHYSICAL_START=0x100000
# CONFIG_KEXEC is not set
#
# Power management options (ACPI, APM)
#
CONFIG_PM=y
CONFIG_PM_LEGACY=y
# CONFIG_PM_DEBUG is not set
#
# ACPI (Advanced Configuration and Power Interface) Support
#
CONFIG_ACPI=y
CONFIG_ACPI_AC=y
CONFIG_ACPI_BATTERY=y
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_VIDEO=m
CONFIG_ACPI_HOTKEY=m
CONFIG_ACPI_FAN=y
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_THERMAL=y
# CONFIG_ACPI_ASUS is not set
CONFIG_ACPI_IBM=m
# CONFIG_ACPI_TOSHIBA is not set
CONFIG_ACPI_CUSTOM_DSDT=y
CONFIG_ACPI_CUSTOM_DSDT_FILE="/home/kamezawa/Development/custom_dsdt_aworks.h"
CONFIG_ACPI_BLACKLIST_YEAR=0
CONFIG_ACPI_DEBUG=y
CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_SYSTEM=y
# CONFIG_X86_PM_TIMER is not set
# CONFIG_ACPI_CONTAINER is not set
CONFIG_ACPI_HOTPLUG_MEMORY=y
#
# APM (Advanced Power Management) BIOS Support
#
# CONFIG_APM is not set
#
# CPU Frequency scaling
#
# CONFIG_CPU_FREQ is not set
#
# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
#
CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GOMMCONFIG is not set
# CONFIG_PCI_GODIRECT is not set
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
# CONFIG_PCIEPORTBUS is not set
# CONFIG_PCI_MSI is not set
CONFIG_PCI_LEGACY_PROC=y
# CONFIG_PCI_DEBUG is not set
CONFIG_ISA_DMA_API=y
CONFIG_ISA=y
# CONFIG_EISA is not set
# CONFIG_MCA is not set
# CONFIG_SCx200 is not set
# CONFIG_HOTPLUG_CPU is not set
#
# PCCARD (PCMCIA/CardBus) support
#
# CONFIG_PCCARD is not set
#
# PCI Hotplug Support
#
# CONFIG_HOTPLUG_PCI is not set
#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_AOUT=y
CONFIG_BINFMT_MISC=y
#
# Networking
#
CONFIG_NET=y
#
# Networking options
#
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_FIB_HASH=y
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_IP_MROUTE is not set
# CONFIG_ARPD is not set
# CONFIG_SYN_COOKIES is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_TUNNEL is not set
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_BIC=y
#
# IP: Virtual Server Configuration
#
# CONFIG_IP_VS is not set
# CONFIG_IPV6 is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
#
# Core Netfilter Configuration
#
# CONFIG_NETFILTER_NETLINK is not set
#
# IP: Netfilter Configuration
#
CONFIG_IP_NF_CONNTRACK=y
# CONFIG_IP_NF_CT_ACCT is not set
# CONFIG_IP_NF_CONNTRACK_MARK is not set
# CONFIG_IP_NF_CONNTRACK_EVENTS is not set
# CONFIG_IP_NF_CT_PROTO_SCTP is not set
# CONFIG_IP_NF_FTP is not set
# CONFIG_IP_NF_IRC is not set
# CONFIG_IP_NF_NETBIOS_NS is not set
# CONFIG_IP_NF_TFTP is not set
# CONFIG_IP_NF_AMANDA is not set
# CONFIG_IP_NF_PPTP is not set
CONFIG_IP_NF_QUEUE=y
CONFIG_IP_NF_IPTABLES=y
CONFIG_IP_NF_MATCH_LIMIT=y
CONFIG_IP_NF_MATCH_IPRANGE=y
CONFIG_IP_NF_MATCH_MAC=y
CONFIG_IP_NF_MATCH_PKTTYPE=y
CONFIG_IP_NF_MATCH_MARK=y
CONFIG_IP_NF_MATCH_MULTIPORT=y
CONFIG_IP_NF_MATCH_TOS=y
CONFIG_IP_NF_MATCH_RECENT=y
CONFIG_IP_NF_MATCH_ECN=y
CONFIG_IP_NF_MATCH_DSCP=y
CONFIG_IP_NF_MATCH_AH_ESP=y
CONFIG_IP_NF_MATCH_LENGTH=y
CONFIG_IP_NF_MATCH_TTL=y
CONFIG_IP_NF_MATCH_TCPMSS=y
CONFIG_IP_NF_MATCH_HELPER=y
CONFIG_IP_NF_MATCH_STATE=y
CONFIG_IP_NF_MATCH_CONNTRACK=y
CONFIG_IP_NF_MATCH_OWNER=y
# CONFIG_IP_NF_MATCH_ADDRTYPE is not set
# CONFIG_IP_NF_MATCH_REALM is not set
# CONFIG_IP_NF_MATCH_SCTP is not set
# CONFIG_IP_NF_MATCH_DCCP is not set
# CONFIG_IP_NF_MATCH_COMMENT is not set
# CONFIG_IP_NF_MATCH_HASHLIMIT is not set
# CONFIG_IP_NF_MATCH_STRING is not set
CONFIG_IP_NF_FILTER=y
CONFIG_IP_NF_TARGET_REJECT=y
CONFIG_IP_NF_TARGET_LOG=y
CONFIG_IP_NF_TARGET_ULOG=y
CONFIG_IP_NF_TARGET_TCPMSS=y
# CONFIG_IP_NF_TARGET_NFQUEUE is not set
CONFIG_IP_NF_NAT=y
CONFIG_IP_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=y
CONFIG_IP_NF_TARGET_REDIRECT=y
CONFIG_IP_NF_TARGET_NETMAP=y
CONFIG_IP_NF_TARGET_SAME=y
# CONFIG_IP_NF_NAT_SNMP_BASIC is not set
CONFIG_IP_NF_MANGLE=y
CONFIG_IP_NF_TARGET_TOS=y
CONFIG_IP_NF_TARGET_ECN=y
CONFIG_IP_NF_TARGET_DSCP=y
CONFIG_IP_NF_TARGET_MARK=y
CONFIG_IP_NF_TARGET_CLASSIFY=y
# CONFIG_IP_NF_TARGET_TTL is not set
CONFIG_IP_NF_RAW=m
CONFIG_IP_NF_TARGET_NOTRACK=m
CONFIG_IP_NF_ARPTABLES=y
CONFIG_IP_NF_ARPFILTER=y
CONFIG_IP_NF_ARP_MANGLE=y
#
# DCCP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_DCCP is not set
#
# SCTP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_SCTP is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_IEEE80211 is not set
#
# Device Drivers
#
#
# Generic Driver Options
#
# CONFIG_STANDALONE is not set
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=m
# CONFIG_DEBUG_DRIVER is not set
#
# Connector - unified userspace <-> kernelspace linker
#
# CONFIG_CONNECTOR is not set
#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set
#
# Parallel port support
#
CONFIG_PARPORT=y
CONFIG_PARPORT_PC=y
# CONFIG_PARPORT_SERIAL is not set
# CONFIG_PARPORT_PC_FIFO is not set
# CONFIG_PARPORT_PC_SUPERIO is not set
# CONFIG_PARPORT_GSC is not set
# CONFIG_PARPORT_1284 is not set
#
# Plug and Play support
#
CONFIG_PNP=y
# CONFIG_PNP_DEBUG is not set
#
# Protocols
#
# CONFIG_ISAPNP is not set
CONFIG_PNPBIOS=y
CONFIG_PNPBIOS_PROC_FS=y
# CONFIG_PNPACPI is not set
#
# Block devices
#
CONFIG_BLK_DEV_FD=y
# CONFIG_BLK_DEV_XD is not set
# CONFIG_PARIDE is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
CONFIG_BLK_DEV_INITRD=y
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
#
# ATA/ATAPI/MFM/RLL support
#
CONFIG_IDE=y
CONFIG_BLK_DEV_IDE=y
#
# Please see Documentation/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_IDE_SATA is not set
# CONFIG_BLK_DEV_HD_IDE is not set
CONFIG_BLK_DEV_IDEDISK=y
CONFIG_IDEDISK_MULTI_MODE=y
CONFIG_BLK_DEV_IDECD=y
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not set
# CONFIG_BLK_DEV_IDESCSI is not set
# CONFIG_IDE_TASK_IOCTL is not set
#
# IDE chipset support/bugfixes
#
CONFIG_IDE_GENERIC=y
CONFIG_BLK_DEV_CMD640=y
# CONFIG_BLK_DEV_CMD640_ENHANCED is not set
# CONFIG_BLK_DEV_IDEPNP is not set
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_SHARE_IRQ=y
# CONFIG_BLK_DEV_OFFBOARD is not set
CONFIG_BLK_DEV_GENERIC=y
# CONFIG_BLK_DEV_OPTI621 is not set
CONFIG_BLK_DEV_RZ1000=y
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
CONFIG_IDEDMA_PCI_AUTO=y
# CONFIG_IDEDMA_ONLYDISK is not set
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
# CONFIG_BLK_DEV_ATIIXP is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_TRIFLEX is not set
# CONFIG_BLK_DEV_CY82C693 is not set
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_CS5535 is not set
# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_SC1200 is not set
CONFIG_BLK_DEV_PIIX=y
# CONFIG_BLK_DEV_IT821X is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIIMAGE is not set
# CONFIG_BLK_DEV_SIS5513 is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
# CONFIG_IDE_ARM is not set
# CONFIG_IDE_CHIPSETS is not set
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_IVB is not set
CONFIG_IDEDMA_AUTO=y
# CONFIG_BLK_DEV_HD is not set
#
# SCSI device support
#
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
# CONFIG_BLK_DEV_SR is not set
CONFIG_CHR_DEV_SG=y
# CONFIG_CHR_DEV_SCH is not set
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
#
# SCSI Transport Attributes
#
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_ATTRS is not set
#
# SCSI Transport Layers
#
# CONFIG_SAS_CLASS is not set
#
# SCSI low-level drivers
#
# CONFIG_ISCSI_TCP is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_7000FASST is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AHA152X is not set
# CONFIG_SCSI_AHA1542 is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
CONFIG_SCSI_DPT_I2O=m
# CONFIG_SCSI_IN2000 is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
CONFIG_SCSI_SATA=y
# CONFIG_SCSI_SATA_AHCI is not set
# CONFIG_SCSI_PATA_AMD is not set
# CONFIG_SCSI_SATA_SVW is not set
# CONFIG_SCSI_PATA_TRIFLEX is not set
CONFIG_SCSI_ATA_PIIX=y
# CONFIG_SCSI_SATA_MV is not set
# CONFIG_SCSI_SATA_NV is not set
# CONFIG_SCSI_PATA_OPTI is not set
# CONFIG_SCSI_PDC_ADMA is not set
# CONFIG_SCSI_SATA_QSTOR is not set
# CONFIG_SCSI_PATA_PDC2027X is not set
# CONFIG_SCSI_SATA_PROMISE is not set
CONFIG_SCSI_SATA_SX4=m
# CONFIG_SCSI_SATA_SIL is not set
# CONFIG_SCSI_SATA_SIL24 is not set
# CONFIG_SCSI_PATA_SIL680 is not set
CONFIG_SCSI_SATA_SIS=m
# CONFIG_SCSI_SATA_ULI is not set
# CONFIG_SCSI_PATA_VIA is not set
# CONFIG_SCSI_SATA_VIA is not set
# CONFIG_SCSI_SATA_VITESSE is not set
CONFIG_SCSI_SATA_INTEL_COMBINED=y
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_DTC3280 is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_GENERIC_NCR5380 is not set
# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_PPA is not set
# CONFIG_SCSI_IMM is not set
# CONFIG_SCSI_NCR53C406A is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
CONFIG_SCSI_IPR=m
# CONFIG_SCSI_IPR_TRACE is not set
# CONFIG_SCSI_IPR_DUMP is not set
# CONFIG_SCSI_PAS16 is not set
# CONFIG_SCSI_PSI240I is not set
# CONFIG_SCSI_QLOGIC_FAS is not set
# CONFIG_SCSI_QLOGIC_FC is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
CONFIG_SCSI_QLA2XXX=y
# CONFIG_SCSI_QLA21XX is not set
# CONFIG_SCSI_QLA22XX is not set
# CONFIG_SCSI_QLA2300 is not set
# CONFIG_SCSI_QLA2322 is not set
# CONFIG_SCSI_QLA6312 is not set
# CONFIG_SCSI_QLA24XX is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_SYM53C416 is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_T128 is not set
# CONFIG_SCSI_U14_34F is not set
# CONFIG_SCSI_ULTRASTOR is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
#
# Old CD-ROM drivers (not SCSI, not IDE)
#
# CONFIG_CD_NO_IDESCSI is not set
#
# Multi-device support (RAID and LVM)
#
# CONFIG_MD is not set
#
# Fusion MPT device support
#
# CONFIG_FUSION is not set
# CONFIG_FUSION_SPI is not set
# CONFIG_FUSION_FC is not set
# CONFIG_FUSION_SAS is not set
#
# IEEE 1394 (FireWire) support
#
CONFIG_IEEE1394=y
#
# Subsystem Options
#
# CONFIG_IEEE1394_VERBOSEDEBUG is not set
# CONFIG_IEEE1394_OUI_DB is not set
# CONFIG_IEEE1394_EXTRA_CONFIG_ROMS is not set
# CONFIG_IEEE1394_EXPORT_FULL_API is not set
#
# Device Drivers
#
#
# Texas Instruments PCILynx requires I2C
#
CONFIG_IEEE1394_OHCI1394=y
#
# Protocol Drivers
#
# CONFIG_IEEE1394_VIDEO1394 is not set
# CONFIG_IEEE1394_SBP2 is not set
# CONFIG_IEEE1394_ETH1394 is not set
# CONFIG_IEEE1394_DV1394 is not set
CONFIG_IEEE1394_RAWIO=y
#
# I2O device support
#
# CONFIG_I2O is not set
#
# Network device support
#
CONFIG_NETDEVICES=y
CONFIG_DUMMY=m
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_NET_SB1000 is not set
#
# ARCnet devices
#
# CONFIG_ARCNET is not set
#
# PHY device support
#
# CONFIG_PHYLIB is not set
#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_LANCE is not set
# CONFIG_NET_VENDOR_SMC is not set
# CONFIG_NET_VENDOR_RACAL is not set
#
# Tulip family network device support
#
# CONFIG_NET_TULIP is not set
# CONFIG_AT1700 is not set
# CONFIG_DEPCA is not set
# CONFIG_HP100 is not set
# CONFIG_NET_ISA is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_AC3200 is not set
# CONFIG_APRICOT is not set
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
# CONFIG_CS89x0 is not set
# CONFIG_DGRS is not set
# CONFIG_EEPRO100 is not set
# CONFIG_E100 is not set
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
# CONFIG_NE2K_PCI is not set
# CONFIG_8139CP is not set
CONFIG_8139TOO=y
CONFIG_8139TOO_PIO=y
# CONFIG_8139TOO_TUNE_TWISTER is not set
# CONFIG_8139TOO_8129 is not set
# CONFIG_8139_OLD_RX_RESET is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_NET_POCKET is not set
#
# Ethernet (1000 Mbit)
#
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
#
# Ethernet (10000 Mbit)
#
# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGB is not set
CONFIG_S2IO=m
# CONFIG_S2IO_NAPI is not set
#
# Token Ring devices
#
# CONFIG_TR is not set
#
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set
#
# Wan interfaces
#
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PLIP is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_KGDBOE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NETPOLL_RX is not set
# CONFIG_NETPOLL_TRAP is not set
# CONFIG_NET_POLL_CONTROLLER is not set
#
# ISDN subsystem
#
# CONFIG_ISDN is not set
#
# Telephony Support
#
# CONFIG_PHONE is not set
#
# Input device support
#
CONFIG_INPUT=y
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_INPORT is not set
CONFIG_MOUSE_LOGIBM=y
# CONFIG_MOUSE_PC110PAD is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
# CONFIG_SERIO_SERPORT is not set
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PARKBD is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_GAMEPORT is not set
#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
# Serial drivers
#
CONFIG_SERIAL_8250=y
# CONFIG_SERIAL_8250_CONSOLE is not set
# CONFIG_SERIAL_8250_ACPI is not set
CONFIG_SERIAL_8250_NR_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set
#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
CONFIG_PRINTER=y
# CONFIG_LP_CONSOLE is not set
# CONFIG_PPDEV is not set
# CONFIG_TIPAR is not set
#
# IPMI
#
# CONFIG_IPMI_HANDLER is not set
#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_NVRAM is not set
# CONFIG_RTC is not set
# CONFIG_GEN_RTC is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_SONYPI is not set
#
# Ftape, the floppy tape device driver
#
CONFIG_AGP=y
# CONFIG_AGP_ALI is not set
# CONFIG_AGP_ATI is not set
# CONFIG_AGP_AMD is not set
# CONFIG_AGP_AMD64 is not set
CONFIG_AGP_INTEL=y
# CONFIG_AGP_NVIDIA is not set
# CONFIG_AGP_SIS is not set
# CONFIG_AGP_SWORKS is not set
# CONFIG_AGP_VIA is not set
# CONFIG_AGP_EFFICEON is not set
CONFIG_DRM=y
# CONFIG_DRM_TDFX is not set
# CONFIG_DRM_R128 is not set
# CONFIG_DRM_RADEON is not set
# CONFIG_DRM_I810 is not set
# CONFIG_DRM_I830 is not set
# CONFIG_DRM_I915 is not set
# CONFIG_DRM_MGA is not set
# CONFIG_DRM_SIS is not set
# CONFIG_DRM_VIA is not set
# CONFIG_DRM_SAVAGE is not set
# CONFIG_MWAVE is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_HPET is not set
# CONFIG_HANGCHECK_TIMER is not set
#
# TPM devices
#
# CONFIG_TCG_TPM is not set
# CONFIG_TELCLOCK is not set
#
# I2C support
#
# CONFIG_I2C is not set
#
# Dallas's 1-wire bus
#
# CONFIG_W1 is not set
#
# Hardware Monitoring support
#
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
# CONFIG_SENSORS_HDAPS is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
#
# Misc devices
#
# CONFIG_IBM_ASM is not set
#
# Multimedia Capabilities Port drivers
#
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
#
# Digital Video Broadcasting Devices
#
# CONFIG_DVB is not set
#
# Graphics support
#
# CONFIG_FB is not set
# CONFIG_VIDEO_SELECT is not set
#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
# CONFIG_MDA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
#
# Speakup console speech
#
# CONFIG_SPEAKUP is not set
#
# Sound
#
CONFIG_SOUND=y
#
# Advanced Linux Sound Architecture
#
CONFIG_SND=y
CONFIG_SND_AC97_CODEC=y
CONFIG_SND_AC97_BUS=y
CONFIG_SND_TIMER=y
CONFIG_SND_PCM=y
CONFIG_SND_SEQUENCER=y
# CONFIG_SND_SEQ_DUMMY is not set
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=y
CONFIG_SND_PCM_OSS=y
CONFIG_SND_SEQUENCER_OSS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
#
# Generic devices
#
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_VIRMIDI is not set
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set
#
# ISA devices
#
# CONFIG_SND_AD1816A is not set
# CONFIG_SND_AD1848 is not set
# CONFIG_SND_CS4231 is not set
# CONFIG_SND_CS4232 is not set
# CONFIG_SND_CS4236 is not set
# CONFIG_SND_ES968 is not set
# CONFIG_SND_ES1688 is not set
# CONFIG_SND_ES18XX is not set
# CONFIG_SND_GUSCLASSIC is not set
# CONFIG_SND_GUSEXTREME is not set
# CONFIG_SND_GUSMAX is not set
# CONFIG_SND_INTERWAVE is not set
# CONFIG_SND_INTERWAVE_STB is not set
# CONFIG_SND_OPTI92X_AD1848 is not set
# CONFIG_SND_OPTI92X_CS4231 is not set
# CONFIG_SND_OPTI93X is not set
# CONFIG_SND_SB8 is not set
# CONFIG_SND_SB16 is not set
# CONFIG_SND_SBAWE is not set
# CONFIG_SND_WAVEFRONT is not set
# CONFIG_SND_ALS100 is not set
# CONFIG_SND_AZT2320 is not set
# CONFIG_SND_CMI8330 is not set
# CONFIG_SND_DT019X is not set
# CONFIG_SND_OPL3SA2 is not set
# CONFIG_SND_SGALAXY is not set
# CONFIG_SND_SSCAPE is not set
#
# PCI devices
#
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_EMU10K1X is not set
# CONFIG_SND_CA0106 is not set
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_HDSPM is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_YMFPCI is not set
# CONFIG_SND_AD1889 is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_CS5535AUDIO is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_FM801 is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
CONFIG_SND_INTEL8X0=y
# CONFIG_SND_INTEL8X0M is not set
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VX222 is not set
# CONFIG_SND_HDA_INTEL is not set
#
# USB devices
#
# CONFIG_SND_USB_AUDIO is not set
# CONFIG_SND_USB_USX2Y is not set
#
# Open Sound System
#
# CONFIG_SOUND_PRIME is not set
#
# USB support
#
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_BANDWIDTH is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_SUSPEND is not set
# CONFIG_USB_OTG is not set
#
# USB Host Controller Drivers
#
CONFIG_USB_EHCI_HCD=y
# CONFIG_USB_EHCI_SPLIT_ISO is not set
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_OHCI_HCD is not set
CONFIG_USB_UHCI_HCD=y
# CONFIG_USB_SL811_HCD is not set
#
# USB Device Class drivers
#
# CONFIG_USB_ACM is not set
CONFIG_USB_PRINTER=y
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
#
# may also be needed; see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_DPCM is not set
# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_LIBUSUAL is not set
#
# USB Input Devices
#
CONFIG_USB_HID=y
CONFIG_USB_HIDINPUT=y
# CONFIG_HID_FF is not set
# CONFIG_USB_HIDDEV is not set
# CONFIG_USB_AIPTEK is not set
# CONFIG_USB_WACOM is not set
# CONFIG_USB_ACECAD is not set
# CONFIG_USB_KBTAB is not set
# CONFIG_USB_POWERMATE is not set
# CONFIG_USB_MTOUCH is not set
# CONFIG_USB_ITMTOUCH is not set
CONFIG_USB_EGALAX=m
# CONFIG_USB_YEALINK is not set
# CONFIG_USB_XPAD is not set
# CONFIG_USB_ATI_REMOTE is not set
# CONFIG_USB_KEYSPAN_REMOTE is not set
# CONFIG_USB_APPLETOUCH is not set
#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
#
# USB Multimedia devices
#
# CONFIG_USB_DABUSB is not set
#
# Video4Linux support is needed for USB Multimedia device support
#
#
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set
CONFIG_USB_MON=y
#
# USB port drivers
#
# CONFIG_USB_USS720 is not set
#
# USB Serial Converter support
#
# CONFIG_USB_SERIAL is not set
#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_LED is not set
CONFIG_USB_CYTHERM=m
# CONFIG_USB_GOTEMP is not set
# CONFIG_USB_PHIDGETKIT is not set
CONFIG_USB_PHIDGETSERVO=m
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TEST is not set
#
# USB DSL modem support
#
#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
#
# MMC/SD Card support
#
# CONFIG_MMC is not set
#
# InfiniBand support
#
# CONFIG_INFINIBAND is not set
#
# SN Devices
#
#
# EDAC - error detection and reporting (RAS)
#
# CONFIG_EDAC is not set
#
# Distributed Lock Manager
#
# CONFIG_DLM is not set
#
# File systems
#
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISER4_FS is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
CONFIG_AUTOFS4_FS=y
# CONFIG_FUSE_FS is not set
#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
# CONFIG_ZISOFS is not set
CONFIG_UDF_FS=y
CONFIG_UDF_NLS=y
#
# DOS/FAT/NT Filesystems
#
# CONFIG_MSDOS_FS is not set
# CONFIG_VFAT_FS is not set
# CONFIG_NTFS_FS is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
# CONFIG_RELAYFS_FS is not set
# CONFIG_CONFIGFS_FS is not set
#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_ASFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
#
# Network File Systems
#
CONFIG_NFS_FS=y
# CONFIG_NFS_V3 is not set
# CONFIG_NFS_V4 is not set
# CONFIG_NFS_DIRECTIO is not set
CONFIG_NFSD=y
# CONFIG_NFSD_V3 is not set
CONFIG_NFSD_TCP=y
CONFIG_LOCKD=y
CONFIG_EXPORTFS=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
# CONFIG_9P_FS is not set
#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
#
# Native Language Support
#
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=y
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set
#
# Instrumentation Support
#
CONFIG_PROFILING=y
CONFIG_OPROFILE=y
# CONFIG_KPROBES is not set
#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_MAGIC_SYSRQ is not set
CONFIG_LOG_BUF_SHIFT=15
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_DEBUG_SLAB is not set
CONFIG_DEBUG_PREEMPT=y
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_HIGHMEM is not set
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_INFO=y
# CONFIG_PAGE_OWNER is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_DEBUG_VM is not set
CONFIG_FRAME_POINTER=y
# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_EARLY_PRINTK=y
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_DEBUG_RODATA is not set
# CONFIG_4KSTACKS is not set
CONFIG_X86_FIND_SMP_CONFIG=y
CONFIG_X86_MPPARSE=y
# CONFIG_KGDB is not set
#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
#
# Cryptographic options
#
# CONFIG_CRYPTO is not set
#
# Hardware crypto devices
#
#
# Library routines
#
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
CONFIG_CRC32=y
CONFIG_LIBCRC32C=m
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_PENDING_IRQ=y
CONFIG_X86_SMP=y
CONFIG_X86_HT=y
CONFIG_X86_BIOS_REBOOT=y
CONFIG_X86_TRAMPOLINE=y
On Wednesday 23 November 2005 21:06, Frank Sorenson wrote:
> Andrew Morton wrote:
> > Marc Koschewski <[email protected]> wrote:
> >>Just booted into 2.6.15-rc2-mm1. The 'mouse problem' (as reported earlier) still
> >>persists,
> >
> > You'l probably need to re-report the mouse problem if the previous report
> > didn't get any action.
>
> I'm not certain whether this is the same 'mouse problem', but I'll
> report the mouse problems I've been seeing. In the past several -mm
> kernels, my touchpad has initially worked at boot, but 'tapping' has
> stopped working at some point later (with no obvious kernel messages).
>
> I've experienced this problem at least with 2.6.15-rc1-mm2 and
> 2.6.15-rc2-mm1, and reverting
> input-attempt-to-re-synchronize-mouse-every-5-seconds.patch gives a
> kernel without the touchpad problems.
>
What kind of touchpad do you have? Could you post your
/pros/bus/input/devices please?
--
Dmitry
On Wed, Nov 23, 2005 at 11:54:40PM +0100, Adrian Bunk wrote:
> On Wed, Nov 23, 2005 at 02:46:51PM -0800, Randy.Dunlap wrote:
> > On Wed, 23 Nov 2005, Adrian Bunk wrote:
> >
> > > Every inline dummy function should be static.
> >
> > Please explain why it matters in this case.
>
> We don't need an additional global copy of the function.
it's an empty body, surely the compiler will compile it away ?
Dave
KAMEZAWA Hiroyuki <[email protected]> wrote:
>
> CHK include/linux/version.h
> CHK include/linux/compile.h
> CHK usr/initramfs_list
> CC drivers/base/memory.o
> drivers/base/memory.c:28: error: static declaration of 'memory_sysdev_class' follows non-static declaration
> include/linux/memory.h:88: error: previous declaration of 'memory_sysdev_class' was here
Thanks.
--- devel/include/linux/memory.h~memory_sysdev_class-is-static 2005-11-23 21:01:27.000000000 -0800
+++ devel-akpm/include/linux/memory.h 2005-11-23 21:01:36.000000000 -0800
@@ -85,7 +85,6 @@ struct notifier_block;
extern int register_memory_notifier(struct notifier_block *nb);
extern void unregister_memory_notifier(struct notifier_block *nb);
-extern struct sysdev_class memory_sysdev_class;
#endif /* CONFIG_MEMORY_HOTPLUG */
#define hotplug_memory_notifier(fn, pri) { \
_
Dave Jones <[email protected]> wrote:
>
> On Wed, Nov 23, 2005 at 11:54:40PM +0100, Adrian Bunk wrote:
> > On Wed, Nov 23, 2005 at 02:46:51PM -0800, Randy.Dunlap wrote:
> > > On Wed, 23 Nov 2005, Adrian Bunk wrote:
> > >
> > > > Every inline dummy function should be static.
> > >
> > > Please explain why it matters in this case.
> >
> > We don't need an additional global copy of the function.
>
> it's an empty body, surely the compiler will compile it away ?
>
With
inline void foo(void)
{
}
The compiler has to put an out-of-line copy of foo() into this .o file in
case some other .o file calls it.
On Wed, Nov 23, 2005 at 11:21:50PM -0500, Dave Jones wrote:
> On Wed, Nov 23, 2005 at 11:54:40PM +0100, Adrian Bunk wrote:
> > On Wed, Nov 23, 2005 at 02:46:51PM -0800, Randy.Dunlap wrote:
> > > On Wed, 23 Nov 2005, Adrian Bunk wrote:
> > >
> > > > Every inline dummy function should be static.
> > >
> > > Please explain why it matters in this case.
> >
> > We don't need an additional global copy of the function.
>
> it's an empty body, surely the compiler will compile it away ?
For the one call in init/main.c the function is always inlined and
optimized away.
But if it isn't static, gcc must additionally emit a global function.
> Dave
cu
Adrian
--
"Is there not promise of rain?" Ling Tan asked suddenly out
of the darkness. There had been need of rain for many days.
"Only a promise," Lao Er said.
Pearl S. Buck - Dragon Seed
On Wed, Nov 23, 2005 at 11:35:05PM +0100, Adrian Bunk wrote:
> Every inline dummy function should be static.
>...
Sorry, the patch was incomplete.
Updated patch below.
cu
Adrian
<-- snip -->
Every inline dummy function should be static.
Signed-off-by: Adrian Bunk <[email protected]>
---
include/asm-i386/cacheflush.h | 2 ++
include/asm-x86_64/cacheflush.h | 3 +++
init/main.c | 2 +-
3 files changed, 6 insertions(+), 1 deletion(-)
--- linux-2.6.15-rc2-mm1/include/asm-i386/cacheflush.h.old 2005-11-24 05:55:28.000000000 +0100
+++ linux-2.6.15-rc2-mm1/include/asm-i386/cacheflush.h 2005-11-24 06:09:24.000000000 +0100
@@ -31,6 +31,8 @@
void kernel_map_pages(struct page *page, int numpages, int enable);
#endif
+#ifdef CONFIG_DEBUG_RODATA
void mark_rodata_ro(void);
+#endif
#endif /* _I386_CACHEFLUSH_H */
--- linux-2.6.15-rc2-mm1/include/asm-x86_64/cacheflush.h.old 2005-11-24 06:12:03.000000000 +0100
+++ linux-2.6.15-rc2-mm1/include/asm-x86_64/cacheflush.h 2005-11-24 06:11:01.000000000 +0100
@@ -26,6 +26,9 @@
void global_flush_tlb(void);
int change_page_attr(struct page *page, int numpages, pgprot_t prot);
int change_page_attr_addr(unsigned long addr, int numpages, pgprot_t prot);
+
+#ifdef CONFIG_DEBUG_RODATA
void mark_rodata_ro(void);
+#endif
#endif /* _X8664_CACHEFLUSH_H */
--- linux-2.6.15-rc2-mm1/init/main.c.old 2005-11-24 05:56:17.000000000 +0100
+++ linux-2.6.15-rc2-mm1/init/main.c 2005-11-24 06:09:54.000000000 +0100
@@ -101,7 +101,7 @@
static inline void acpi_early_init(void) { }
#endif
#ifndef CONFIG_DEBUG_RODATA
-inline void mark_rodata_ro(void) { }
+static inline void mark_rodata_ro(void) { }
#endif
#ifdef CONFIG_TC
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Dmitry Torokhov wrote:
> What kind of touchpad do you have? Could you post your
> /pros/bus/input/devices please?
AlpsPS/2 ALPS GlidePoint
/proc/bus/input/devices:
I: Bus=0010 Vendor=001f Product=0001 Version=0100
N: Name="PC Speaker"
P: Phys=isa0061/input0
S: Sysfs=/class/input/input0
H: Handlers=kbd event0
B: EV=40001
B: SND=46
I: Bus=0011 Vendor=0001 Product=0001 Version=ab41
N: Name="AT Translated Set 2 keyboard"
P: Phys=isa0060/serio0/input0
S: Sysfs=/class/input/input1
H: Handlers=kbd event1
B: EV=120013
B: KEY=4 2000000 3802078 f840d001 f2ffffdf ffefffff ffffffff fffffffe
B: MSC=10
B: LED=7
I: Bus=0011 Vendor=0002 Product=0008 Version=0000
N: Name="PS/2 Mouse"
P: Phys=isa0060/serio1/input1
S: Sysfs=/class/input/input2
H: Handlers=mouse0 event2
B: EV=7
B: KEY=70000 0 0 0 0 0 0 0 0
B: REL=3
I: Bus=0011 Vendor=0002 Product=0008 Version=7321
N: Name="AlpsPS/2 ALPS GlidePoint"
P: Phys=isa0060/serio1/input0
S: Sysfs=/class/input/input3
H: Handlers=mouse1 event3
B: EV=f
B: KEY=420 0 70000 0 0 0 0 0 0 0 0
B: REL=3
B: ABS=1000003
Note: I believe this issue may also be related to the mouse protocol
extension. I typically run with 'psmouse.proto=exps' on the kernel
command line, and the psmouse resync patch seems to break tapping in
that mode. However, booting without proto=exps seems to continue to
work, even with the resync patch (though the touchpad is unusably
sensitive--hence the use of exps in the first place).
Thanks,
Frank
- --
Frank Sorenson - KD7TZK
Systems Manager, Computer Science Department
Brigham Young University
[email protected]
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.1 (GNU/Linux)
Comment: Using GnuPG with Fedora - http://enigmail.mozdev.org
iD8DBQFDhVpQaI0dwg4A47wRAgxMAKCgcX59rpVR2umCUz4IBNls8L+8EQCfQprd
4v8Qxv3890dRIus0ptIyGxs=
=AJGF
-----END PGP SIGNATURE-----
On Wed, 2005-11-23 at 23:35 +0100, Adrian Bunk wrote:
> Every inline dummy function should be static.
that gave a spewload of warnings when I did it in the first place
though.....
On Thu, 2005-11-24 at 06:14 +0100, Adrian Bunk wrote:
> On Wed, Nov 23, 2005 at 11:35:05PM +0100, Adrian Bunk wrote:
>
> > Every inline dummy function should be static.
> >...
>
> Sorry, the patch was incomplete.
ok I was trying to avoid the ifdefs... if you add the ifdefs you might
as well put the dummy in the header too in a #else clause.
On Wed, Nov 23, 2005 at 11:22:18AM -0800, Andrew Morton wrote:
> Michal Piotrowski <[email protected]> wrote:
> >
> > Debug: sleeping function called from invalid context at
> > include/asm/semaphore.h:123
> > in_atomic():1, irqs_disabled():0
> > [<c0103be6>] dump_stack+0x17/0x19
> > [<c011a0c3>] __might_sleep+0x9c/0xae
> > [<fd9a090d>] translate_table+0x147/0xc14 [ip_tables]
> > [<fd9a2b2a>] ipt_register_table+0x93/0x20d [ip_tables]
> > [<f98fe027>] init+0x27/0x9e [iptable_filter]
> > [<c01376d0>] sys_init_module+0xd7/0x26c
> > [<c0102cc7>] sysenter_past_esp+0x54/0x75
> > ---------------------------
> > | preempt count: 00000001 ]
> > | 1 level deep critical section nesting:
> > ----------------------------------------
> > .. [<fd9a2aca>] .... ipt_register_table+0x33/0x20d [ip_tables]
> > .....[<f98fe027>] .. ( <= init+0x27/0x9e [iptable_filter])
> >
>
> ipt_register_table() does get_cpu() then calls translate_table(), and
> somewhere under translate_table() we do something which sleeps, only I'm not
> sure what it is - netfilter likes to hide things in unexpected places.
I'll investigate this. the get_cpu() scheme was introduced as a fix for
a different (less serious) problem.
You'll get a reply until later today.
--
- Harald Welte <[email protected]> http://netfilter.org/
============================================================================
"Fragmentation is like classful addressing -- an interesting early
architectural error that shows how much experimentation was going
on while IP was being designed." -- Paul Vixie
* Dmitry Torokhov <[email protected]> [2005-11-23 22:26:43 -0500]:
> On Wednesday 23 November 2005 21:06, Frank Sorenson wrote:
> > Andrew Morton wrote:
> > > Marc Koschewski <[email protected]> wrote:
> > >>Just booted into 2.6.15-rc2-mm1. The 'mouse problem' (as reported earlier) still
> > >>persists,
> > >
> > > You'l probably need to re-report the mouse problem if the previous report
> > > didn't get any action.
> >
> > I'm not certain whether this is the same 'mouse problem', but I'll
> > report the mouse problems I've been seeing. In the past several -mm
> > kernels, my touchpad has initially worked at boot, but 'tapping' has
> > stopped working at some point later (with no obvious kernel messages).
> >
> > I've experienced this problem at least with 2.6.15-rc1-mm2 and
> > 2.6.15-rc2-mm1, and reverting
> > input-attempt-to-re-synchronize-mouse-every-5-seconds.patch gives a
> > kernel without the touchpad problems.
> >
>
> What kind of touchpad do you have? Could you post your
> /pros/bus/input/devices please?
Mine is like this:
I: Bus=0011 Vendor=0001 Product=0001 Version=ab41
N: Name="AT Translated Set 2 keyboard"
P: Phys=isa0060/serio0/input0
S: Sysfs=/class/input/input0
H: Handlers=kbd event0
B: EV=120013
B: KEY=4 2000000 3802078 f840d001 f2ffffdf ffefffff ffffffff fffffffe
B: MSC=10
B: LED=7
I: Bus=0010 Vendor=001f Product=0001 Version=0100
N: Name="PC Speaker"
P: Phys=isa0061/input0
S: Sysfs=/class/input/input1
H: Handlers=kbd event1
B: EV=40001
B: SND=6
I: Bus=0011 Vendor=0002 Product=0005 Version=0000
N: Name="ImPS/2 Generic Wheel Mouse"
P: Phys=isa0060/serio1/input0
S: Sysfs=/class/input/input2
H: Handlers=event2 mouse0
B: EV=7
B: KEY=70000 0 0 0 0 0 0 0 0
B: REL=103
I don't know why my touchpad is not listed. I have one and it perfectly
works with X (same pointer as the mouse which is a Microsoft USB Wheel Mouse'
attached to PS/2 using an appropriate adapter.
Marc
Andrew Morton wrote:
>ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.15-rc2/2.6.15-rc2-mm1/
>
>
>
>
Hi Andrew,
I had this compilation error :
LD .tmp_vmlinux1
drivers/built-in.o: In function `do_uevent':
lockspace.c:(.text+0x148ae7): undefined reference to `kobject_hotplug'
lockspace.c:(.text+0x148b9e): undefined reference to `kobject_hotplug'
DLM was still using kobject_hotplug, which seems to have been removed in
-mm. Brice kindly indicated me how to fix this, in exchange for half a
signed-off, so please see the attached patch. I grep'd the whole source
and did not find any other reference to kobject_hotplug.
Regards,
Alexandre
Signed-off-by: Alexandre Buisse <[email protected]>
Signed-off-by: Brice Goglin <[email protected]>
--- linux-2.6-orig/drivers/oprofile/cpu_buffer.c 2005-11-25 10:24:00.000000000 +0100
+++ linux-2.6/drivers/oprofile/cpu_buffer.c 2005-11-25 14:29:04.000000000 +0100
@@ -52,7 +52,8 @@
for_each_online_cpu(i) {
struct oprofile_cpu_buffer * b = &cpu_buffer[i];
- b->buffer = vmalloc(sizeof(struct op_sample) * buffer_size);
+ b->buffer = vmalloc_node(sizeof(struct op_sample) * buffer_size,
+ cpu_to_node(i));
if (!b->buffer)
goto fail;
On Thu, Nov 24, 2005 at 08:56:59AM +0100, Arjan van de Ven wrote:
> On Thu, 2005-11-24 at 06:14 +0100, Adrian Bunk wrote:
> > On Wed, Nov 23, 2005 at 11:35:05PM +0100, Adrian Bunk wrote:
> >
> > > Every inline dummy function should be static.
> > >...
> >
> > Sorry, the patch was incomplete.
>
> ok I was trying to avoid the ifdefs... if you add the ifdefs you might
> as well put the dummy in the header too in a #else clause.
Since it's not architecture specific, it should also move to a header
under include/linux/.
Any suggestions which one to use?
My first thought was init.h, but this breaks compilation since this
header is #include'd by assembler code.
cu
Adrian
--
"Is there not promise of rain?" Ling Tan asked suddenly out
of the darkness. There had been need of rain for many days.
"Only a promise," Lao Er said.
Pearl S. Buck - Dragon Seed
On Thursday 24 November 2005 04:40, Marc Koschewski wrote:
> I don't know why my touchpad is not listed. I have one and it perfectly
> works with X (same pointer as the mouse which is a Microsoft USB Wheel Mouse'
> attached to PS/2 using an appropriate adapter.
>
[I dropped netdev list from CC...]
You have a Dell Inspiron, right? On Inspirons (and Latitudes) mouse
connected to external PS/2 port completely shadoes touchpad making
it invisible to the kernel.
--
Dmitry
On Thursday 24 November 2005 01:14, Frank Sorenson wrote:
> Note: I believe this issue may also be related to the mouse protocol
> extension. ?I typically run with 'psmouse.proto=exps' on the kernel
> command line, and the psmouse resync patch seems to break tapping in
> that mode.
So the resync patch - is it only tapping that is broken or you also
loosing the touchpad completely?
> However, booting without proto=exps seems to continue to
> work, even with the resync patch (though the touchpad is unusably
> sensitive--hence the use of exps in the first place).
Without the parameter your touchpad is using native ALPS protocol and
resync is disabled for it. You may have better liuck with toucpad
sensitivity using synaptics X driver.
--
Dmitry
* Dmitry Torokhov <[email protected]> [2005-11-25 17:27:24 -0500]:
> On Thursday 24 November 2005 04:40, Marc Koschewski wrote:
> > I don't know why my touchpad is not listed. I have one and it perfectly
> > works with X (same pointer as the mouse which is a Microsoft USB Wheel Mouse'
> > attached to PS/2 using an appropriate adapter.
> >
>
> [I dropped netdev list from CC...]
>
> You have a Dell Inspiron, right? On Inspirons (and Latitudes) mouse
> connected to external PS/2 port completely shadoes touchpad making
> it invisible to the kernel.
I knew that. But just forgot. ;) However, that was not the prob I had. Was just
wondering why it didn't show up in dmesg. I'll try to figure out, what made the
mouse go crazy in -mm series.
Marc
On Friday 25 November 2005 21:52, Marc Koschewski wrote:
> * Dmitry Torokhov <[email protected]> [2005-11-25 17:27:24 -0500]:
>
> > On Thursday 24 November 2005 04:40, Marc Koschewski wrote:
> > > I don't know why my touchpad is not listed. I have one and it perfectly
> > > works with X (same pointer as the mouse which is a Microsoft USB Wheel Mouse'
> > > attached to PS/2 using an appropriate adapter.
> > >
> >
> > [I dropped netdev list from CC...]
> >
> > You have a Dell Inspiron, right? On Inspirons (and Latitudes) mouse
> > connected to external PS/2 port completely shadoes touchpad making
> > it invisible to the kernel.
>
> I knew that. But just forgot. ;) However, that was not the prob I had. Was just
> wondering why it didn't show up in dmesg. I'll try to figure out, what made the
> mouse go crazy in -mm series.
>
The only change to psmouse module in -mm is that resync patch. If it still
gives you troubles after reverting it then something else is wrong in the
kernel. It looks there was some timer rework...
--
Dmitry
On Wed, 23 Nov 2005 03:35:50 PST, Andrew Morton said:
>
> ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.15-rc2/2.6.15-rc2-mm1/
1) This boots on my laptop, so whatever caused the "reset and go back to Grub"
behavior in -rc1-mm1 and -rc1-mm2 has reseolved itself before I got far enough
on bisecting patches to track it down.
2) The strange "ppp traffic spins in kernel and kills keyboard" problem is still
here....