Hi Hans!
Some improvements took place on the driver, including cleaner
v4l2-compliance tests passing. But there's a single test failure I
don't understand.
In the code of v4l2-compliance, it seems like an API
call CREATE_BUFS is supposed to fail with EINVAL. But in case of my
driver, which simply uses vb2_ioctl_create_bufs(), the call returns 0.
Please review the below report.
The report is produced by fresh v4l-utils from git:
v4l-utils-1.10.0-59-g1388c0a
The actual code which was tested is at tag release/tw5864/1.10 of
https://github.com/bluecherrydvr/linux.git , see
drivers/staging/media/tw5864 . If we sort this out, I am considering
resubmit the driver for merging upstream.
There's also another issue with v4l2-compliance. At some moment the
driver receives S_PARM command with timeperframe 0/0, by which reason I
added special handling, but I guess there's something out of my
knowledge which caused this and which should be fixed.
# v4l2-compliance -d /dev/video6 -s
Driver Info:
Driver name : tw5864
Card type : TW5864 Encoder 2
Bus info : PCI:0000:06:05.0
Driver version: 4.5.0
Capabilities : 0x85200001
Video Capture
Read/Write
Streaming
Extended Pix Format
Device Capabilities
Device Caps : 0x05200001
Video Capture
Read/Write
Streaming
Extended Pix Format
Compliance test for device /dev/video6 (not using libv4l2):
Required ioctls:
test VIDIOC_QUERYCAP: OK
Allow for multiple opens:
test second video open: OK
test VIDIOC_QUERYCAP: OK
test VIDIOC_G/S_PRIORITY: OK
Debug ioctls:
test VIDIOC_DBG_G/S_REGISTER: OK (Not Supported)
test VIDIOC_LOG_STATUS: OK
Input ioctls:
test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported)
test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported)
test VIDIOC_ENUMAUDIO: OK (Not Supported)
test VIDIOC_G/S/ENUMINPUT: OK
test VIDIOC_G/S_AUDIO: OK (Not Supported)
Inputs: 1 Audio Inputs: 0 Tuners: 0
Output ioctls:
test VIDIOC_G/S_MODULATOR: OK (Not Supported)
test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
test VIDIOC_ENUMAUDOUT: OK (Not Supported)
test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported)
test VIDIOC_G/S_AUDOUT: OK (Not Supported)
Outputs: 0 Audio Outputs: 0 Modulators: 0
Input/Output configuration ioctls:
test VIDIOC_ENUM/G/S/QUERY_STD: OK
test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported)
test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported)
test VIDIOC_G/S_EDID: OK (Not Supported)
Test input 0:
Control ioctls:
test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK
test VIDIOC_QUERYCTRL: OK
test VIDIOC_G/S_CTRL: OK
test VIDIOC_G/S/TRY_EXT_CTRLS: OK
test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK
test VIDIOC_G/S_JPEGCOMP: OK (Not Supported)
Standard Controls: 11 Private Controls: 0
Format ioctls:
test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK
test VIDIOC_G/S_PARM: OK
test VIDIOC_G_FBUF: OK (Not Supported)
test VIDIOC_G_FMT: OK
test VIDIOC_TRY_FMT: OK
test VIDIOC_S_FMT: OK
test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported)
test Cropping: OK (Not Supported)
test Composing: OK (Not Supported)
test Scaling: OK (Not Supported)
Codec ioctls:
test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported)
test VIDIOC_G_ENC_INDEX: OK (Not Supported)
test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported)
Buffer ioctls:
test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK
test VIDIOC_EXPBUF: OK
Test input 0:
Streaming ioctls:
test read/write: OK
fail: v4l2-test-buffers.cpp(959): ret != EINVAL
test MMAP: FAIL
test USERPTR: OK (Not Supported)
test DMABUF: Cannot test, specify --expbuf-device
Total: 45, Succeeded: 44, Failed: 1, Warnings: 0
[ERR]
14:14:15root@tw ~
# gdb v4l2-compliance
GNU gdb (Ubuntu 7.10-1ubuntu3) 7.10
Copyright (C) 2015 Free Software Foundation, Inc.
License GPLv3+: GNU GPL version 3 or later
<http://gnu.org/licenses/gpl.html> This is free software: you are free
to change and redistribute it. There is NO WARRANTY, to the extent
permitted by law. Type "show copying" and "show warranty" for details.
This GDB was configured as "i686-linux-gnu".
Type "show configuration" for configuration details.
For bug reporting instructions, please see:
<http://www.gnu.org/software/gdb/bugs/>.
Find the GDB manual and other documentation resources online at:
<http://www.gnu.org/software/gdb/documentation/>.
For help, type "help".
Type "apropos word" to search for commands related to "word"...
Reading symbols from v4l2-compliance...done.
(gdb) break v4l2-test-buffers.cpp:959
Breakpoint 1 at 0x8071469: file v4l2-test-buffers.cpp, line 959.
(gdb) run -d /dev/video6 -s
Starting program: /usr/local/bin/v4l2-compliance -d /dev/video6 -s
[Thread debugging using libthread_db enabled]
Using host libthread_db library "/lib/i386-linux-gnu/libthread_db.so.1".
Driver Info:
Driver name : tw5864
Card type : TW5864 Encoder 2
Bus info : PCI:0000:06:05.0
Driver version: 4.5.0
Capabilities : 0x85200001
Video Capture
Read/Write
Streaming
Extended Pix Format
Device Capabilities
Device Caps : 0x05200001
Video Capture
Read/Write
Streaming
Extended Pix Format
Compliance test for device /dev/video6 (not using libv4l2):
Required ioctls:
test VIDIOC_QUERYCAP: OK
Allow for multiple opens:
test second video open: OK
test VIDIOC_QUERYCAP: OK
test VIDIOC_G/S_PRIORITY: OK
Debug ioctls:
test VIDIOC_DBG_G/S_REGISTER: OK (Not Supported)
test VIDIOC_LOG_STATUS: OK
Input ioctls:
test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported)
test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported)
test VIDIOC_ENUMAUDIO: OK (Not Supported)
test VIDIOC_G/S/ENUMINPUT: OK
test VIDIOC_G/S_AUDIO: OK (Not Supported)
Inputs: 1 Audio Inputs: 0 Tuners: 0
Output ioctls:
test VIDIOC_G/S_MODULATOR: OK (Not Supported)
test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
test VIDIOC_ENUMAUDOUT: OK (Not Supported)
test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported)
test VIDIOC_G/S_AUDOUT: OK (Not Supported)
Outputs: 0 Audio Outputs: 0 Modulators: 0
Input/Output configuration ioctls:
test VIDIOC_ENUM/G/S/QUERY_STD: OK
test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported)
test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported)
test VIDIOC_G/S_EDID: OK (Not Supported)
Test input 0:
Control ioctls:
test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK
test VIDIOC_QUERYCTRL: OK
test VIDIOC_G/S_CTRL: OK
test VIDIOC_G/S/TRY_EXT_CTRLS: OK
test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK
test VIDIOC_G/S_JPEGCOMP: OK (Not Supported)
Standard Controls: 11 Private Controls: 0
Format ioctls:
test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK
test VIDIOC_G/S_PARM: OK
test VIDIOC_G_FBUF: OK (Not Supported)
test VIDIOC_G_FMT: OK
test VIDIOC_TRY_FMT: OK
test VIDIOC_S_FMT: OK
test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported)
test Cropping: OK (Not Supported)
test Composing: OK (Not Supported)
test Scaling: OK (Not Supported)
Codec ioctls:
test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported)
test VIDIOC_G_ENC_INDEX: OK (Not Supported)
test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported)
Buffer ioctls:
test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK
test VIDIOC_EXPBUF: OK
Test input 0:
Streaming ioctls:
test read/write: OK
Breakpoint 1, testMmap (node=0xbfffd1e4, frame_count=60) at v4l2-test-buffers.cpp:959
959 fail_on_test(ret != EINVAL);
(gdb) print ret
$1 = 0
(gdb)
On 03/09/2016 03:29 PM, Andrey Utkin wrote:
> Hi Hans!
>
> Some improvements took place on the driver, including cleaner
> v4l2-compliance tests passing. But there's a single test failure I
> don't understand.
>
> In the code of v4l2-compliance, it seems like an API
> call CREATE_BUFS is supposed to fail with EINVAL. But in case of my
> driver, which simply uses vb2_ioctl_create_bufs(), the call returns 0.
>
> Please review the below report.
>
> The report is produced by fresh v4l-utils from git:
> v4l-utils-1.10.0-59-g1388c0a
>
> The actual code which was tested is at tag release/tw5864/1.10 of
> https://github.com/bluecherrydvr/linux.git , see
> drivers/staging/media/tw5864 . If we sort this out, I am considering
> resubmit the driver for merging upstream.
The reason is likely to be the tw5864_queue_setup function which has not been
updated to handle CREATE_BUFS support correctly. It should look like this:
static int tw5864_queue_setup(struct vb2_queue *q,
unsigned int *num_buffers,
unsigned int *num_planes, unsigned int sizes[],
void *alloc_ctxs[])
{
struct tw5864_input *dev = vb2_get_drv_priv(q);
if (q->num_buffers + *num_buffers < 12)
*num_buffers = 12 - q->num_buffers;
alloc_ctxs[0] = dev->alloc_ctx;
if (*num_planes)
return sizes[0] < H264_VLC_BUF_SIZE ? -EINVAL : 0;
sizes[0] = H264_VLC_BUF_SIZE;
*num_planes = 1;
return 0;
}
>
> There's also another issue with v4l2-compliance. At some moment the
> driver receives S_PARM command with timeperframe 0/0, by which reason I
> added special handling, but I guess there's something out of my
> knowledge which caused this and which should be fixed.
A timeperframe value of 0/0 is valid and the driver is supposed to replace it
with the default timeperframe. Which is why v4l2-compliance tests for this
corner case.
Regards,
Hans
>
>
> # v4l2-compliance -d /dev/video6 -s
> Driver Info:
> Driver name : tw5864
> Card type : TW5864 Encoder 2
> Bus info : PCI:0000:06:05.0
> Driver version: 4.5.0
> Capabilities : 0x85200001
> Video Capture
> Read/Write
> Streaming
> Extended Pix Format
> Device Capabilities
> Device Caps : 0x05200001
> Video Capture
> Read/Write
> Streaming
> Extended Pix Format
>
> Compliance test for device /dev/video6 (not using libv4l2):
>
> Required ioctls:
> test VIDIOC_QUERYCAP: OK
>
> Allow for multiple opens:
> test second video open: OK
> test VIDIOC_QUERYCAP: OK
> test VIDIOC_G/S_PRIORITY: OK
>
> Debug ioctls:
> test VIDIOC_DBG_G/S_REGISTER: OK (Not Supported)
> test VIDIOC_LOG_STATUS: OK
>
> Input ioctls:
> test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported)
> test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
> test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported)
> test VIDIOC_ENUMAUDIO: OK (Not Supported)
> test VIDIOC_G/S/ENUMINPUT: OK
> test VIDIOC_G/S_AUDIO: OK (Not Supported)
> Inputs: 1 Audio Inputs: 0 Tuners: 0
>
> Output ioctls:
> test VIDIOC_G/S_MODULATOR: OK (Not Supported)
> test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
> test VIDIOC_ENUMAUDOUT: OK (Not Supported)
> test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported)
> test VIDIOC_G/S_AUDOUT: OK (Not Supported)
> Outputs: 0 Audio Outputs: 0 Modulators: 0
>
> Input/Output configuration ioctls:
> test VIDIOC_ENUM/G/S/QUERY_STD: OK
> test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported)
> test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported)
> test VIDIOC_G/S_EDID: OK (Not Supported)
>
> Test input 0:
>
> Control ioctls:
> test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK
> test VIDIOC_QUERYCTRL: OK
> test VIDIOC_G/S_CTRL: OK
> test VIDIOC_G/S/TRY_EXT_CTRLS: OK
> test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK
> test VIDIOC_G/S_JPEGCOMP: OK (Not Supported)
> Standard Controls: 11 Private Controls: 0
>
> Format ioctls:
> test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK
> test VIDIOC_G/S_PARM: OK
> test VIDIOC_G_FBUF: OK (Not Supported)
> test VIDIOC_G_FMT: OK
> test VIDIOC_TRY_FMT: OK
> test VIDIOC_S_FMT: OK
> test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported)
> test Cropping: OK (Not Supported)
> test Composing: OK (Not Supported)
> test Scaling: OK (Not Supported)
>
> Codec ioctls:
> test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported)
> test VIDIOC_G_ENC_INDEX: OK (Not Supported)
> test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported)
>
> Buffer ioctls:
> test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK
> test VIDIOC_EXPBUF: OK
>
> Test input 0:
>
> Streaming ioctls:
> test read/write: OK
> fail: v4l2-test-buffers.cpp(959): ret != EINVAL
> test MMAP: FAIL
> test USERPTR: OK (Not Supported)
> test DMABUF: Cannot test, specify --expbuf-device
>
>
> Total: 45, Succeeded: 44, Failed: 1, Warnings: 0
> [ERR]
> 14:14:15root@tw ~
> # gdb v4l2-compliance
> GNU gdb (Ubuntu 7.10-1ubuntu3) 7.10
> Copyright (C) 2015 Free Software Foundation, Inc.
> License GPLv3+: GNU GPL version 3 or later
> <http://gnu.org/licenses/gpl.html> This is free software: you are free
> to change and redistribute it. There is NO WARRANTY, to the extent
> permitted by law. Type "show copying" and "show warranty" for details.
> This GDB was configured as "i686-linux-gnu".
> Type "show configuration" for configuration details.
> For bug reporting instructions, please see:
> <http://www.gnu.org/software/gdb/bugs/>.
> Find the GDB manual and other documentation resources online at:
> <http://www.gnu.org/software/gdb/documentation/>.
> For help, type "help".
> Type "apropos word" to search for commands related to "word"...
> Reading symbols from v4l2-compliance...done.
> (gdb) break v4l2-test-buffers.cpp:959
> Breakpoint 1 at 0x8071469: file v4l2-test-buffers.cpp, line 959.
> (gdb) run -d /dev/video6 -s
> Starting program: /usr/local/bin/v4l2-compliance -d /dev/video6 -s
> [Thread debugging using libthread_db enabled]
> Using host libthread_db library "/lib/i386-linux-gnu/libthread_db.so.1".
> Driver Info:
> Driver name : tw5864
> Card type : TW5864 Encoder 2
> Bus info : PCI:0000:06:05.0
> Driver version: 4.5.0
> Capabilities : 0x85200001
> Video Capture
> Read/Write
> Streaming
> Extended Pix Format
> Device Capabilities
> Device Caps : 0x05200001
> Video Capture
> Read/Write
> Streaming
> Extended Pix Format
>
> Compliance test for device /dev/video6 (not using libv4l2):
>
> Required ioctls:
> test VIDIOC_QUERYCAP: OK
>
> Allow for multiple opens:
> test second video open: OK
> test VIDIOC_QUERYCAP: OK
> test VIDIOC_G/S_PRIORITY: OK
>
> Debug ioctls:
> test VIDIOC_DBG_G/S_REGISTER: OK (Not Supported)
> test VIDIOC_LOG_STATUS: OK
>
> Input ioctls:
> test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported)
> test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
> test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported)
> test VIDIOC_ENUMAUDIO: OK (Not Supported)
> test VIDIOC_G/S/ENUMINPUT: OK
> test VIDIOC_G/S_AUDIO: OK (Not Supported)
> Inputs: 1 Audio Inputs: 0 Tuners: 0
>
> Output ioctls:
> test VIDIOC_G/S_MODULATOR: OK (Not Supported)
> test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
> test VIDIOC_ENUMAUDOUT: OK (Not Supported)
> test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported)
> test VIDIOC_G/S_AUDOUT: OK (Not Supported)
> Outputs: 0 Audio Outputs: 0 Modulators: 0
>
> Input/Output configuration ioctls:
> test VIDIOC_ENUM/G/S/QUERY_STD: OK
> test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported)
> test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported)
> test VIDIOC_G/S_EDID: OK (Not Supported)
>
> Test input 0:
>
> Control ioctls:
> test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK
> test VIDIOC_QUERYCTRL: OK
> test VIDIOC_G/S_CTRL: OK
> test VIDIOC_G/S/TRY_EXT_CTRLS: OK
> test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK
> test VIDIOC_G/S_JPEGCOMP: OK (Not Supported)
> Standard Controls: 11 Private Controls: 0
>
> Format ioctls:
> test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK
> test VIDIOC_G/S_PARM: OK
> test VIDIOC_G_FBUF: OK (Not Supported)
> test VIDIOC_G_FMT: OK
> test VIDIOC_TRY_FMT: OK
> test VIDIOC_S_FMT: OK
> test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported)
> test Cropping: OK (Not Supported)
> test Composing: OK (Not Supported)
> test Scaling: OK (Not Supported)
>
> Codec ioctls:
> test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported)
> test VIDIOC_G_ENC_INDEX: OK (Not Supported)
> test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported)
>
> Buffer ioctls:
> test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK
> test VIDIOC_EXPBUF: OK
>
> Test input 0:
>
> Streaming ioctls:
> test read/write: OK
>
> Breakpoint 1, testMmap (node=0xbfffd1e4, frame_count=60) at v4l2-test-buffers.cpp:959
> 959 fail_on_test(ret != EINVAL);
> (gdb) print ret
> $1 = 0
> (gdb)
>
On Fri, 11 Mar 2016 09:00:18 +0100
Hans Verkuil <[email protected]> wrote:
> The reason is likely to be the tw5864_queue_setup function which has
> not been updated to handle CREATE_BUFS support correctly. It should
> look like this:
>
> static int tw5864_queue_setup(struct vb2_queue *q,
> unsigned int *num_buffers,
> unsigned int *num_planes, unsigned int
> sizes[], void *alloc_ctxs[])
> {
> struct tw5864_input *dev = vb2_get_drv_priv(q);
>
> if (q->num_buffers + *num_buffers < 12)
> *num_buffers = 12 - q->num_buffers;
>
> alloc_ctxs[0] = dev->alloc_ctx;
> if (*num_planes)
> return sizes[0] < H264_VLC_BUF_SIZE ? -EINVAL : 0;
>
> sizes[0] = H264_VLC_BUF_SIZE;
> *num_planes = 1;
>
> return 0;
> }
Thanks for suggestion, but now the failure looks this way:
Streaming ioctls:
test read/write: OK
fail: v4l2-test-buffers.cpp(297): g_field() == V4L2_FIELD_ANY
fail: v4l2-test-buffers.cpp(703): buf.check(q, last_seq)
fail: v4l2-test-buffers.cpp(976): captureBufs(node, q, m2m_q, frame_count, false)
test MMAP: FAIL
Will check that later. If you have any suggestions, I would be very
grateful.
On 03/11/2016 09:40 AM, Andrey Utkin wrote:
> On Fri, 11 Mar 2016 09:00:18 +0100
> Hans Verkuil <[email protected]> wrote:
>> The reason is likely to be the tw5864_queue_setup function which has
>> not been updated to handle CREATE_BUFS support correctly. It should
>> look like this:
>>
>> static int tw5864_queue_setup(struct vb2_queue *q,
>> unsigned int *num_buffers,
>> unsigned int *num_planes, unsigned int
>> sizes[], void *alloc_ctxs[])
>> {
>> struct tw5864_input *dev = vb2_get_drv_priv(q);
>>
>> if (q->num_buffers + *num_buffers < 12)
>> *num_buffers = 12 - q->num_buffers;
>>
>> alloc_ctxs[0] = dev->alloc_ctx;
>> if (*num_planes)
>> return sizes[0] < H264_VLC_BUF_SIZE ? -EINVAL : 0;
>>
>> sizes[0] = H264_VLC_BUF_SIZE;
>> *num_planes = 1;
>>
>> return 0;
>> }
>
> Thanks for suggestion, but now the failure looks this way:
>
> Streaming ioctls:
> test read/write: OK
> fail: v4l2-test-buffers.cpp(297): g_field() == V4L2_FIELD_ANY
While userspace may specify FIELD_ANY when setting a format, the driver should
always map that to a specific field setting and should never return FIELD_ANY
back to userspace.
In this case, the 'field' field of the v4l2_buffer struct has FIELD_ANY which
means it is not set correctly (or at all) in the driver.
It's a common mistake, which is why v4l2-compliance tests for it :-)
Regards,
Hans
> fail: v4l2-test-buffers.cpp(703): buf.check(q, last_seq)
> fail: v4l2-test-buffers.cpp(976): captureBufs(node, q, m2m_q, frame_count, false)
> test MMAP: FAIL
>
> Will check that later. If you have any suggestions, I would be very
> grateful.
> --
> To unsubscribe from this list: send the line "unsubscribe linux-media" in
> the body of a message to [email protected]
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
On Fri, 11 Mar 2016 10:59:02 +0100
Hans Verkuil <[email protected]> wrote:
> While userspace may specify FIELD_ANY when setting a format, the
> driver should always map that to a specific field setting and should
> never return FIELD_ANY back to userspace.
>
> In this case, the 'field' field of the v4l2_buffer struct has
> FIELD_ANY which means it is not set correctly (or at all) in the
> driver.
>
> It's a common mistake, which is why v4l2-compliance tests for it :-)
Thanks for great guidance Hans, finally I have solved all issues.
You can review latest state at tw5864 branch, also you can review
changelog of v4l2-compliance fixing at tags tw5864_pre_1.11,
tw5864_pre_1.10 of https://github.com/bluecherrydvr/linux .
I will make a final internal review before submission, and try
to submit the driver for inclusion.
Everybody is appreciated to make any comments even before submission,
the actual code to review is at tw5864 branch.