From: Mike Snitzer <[email protected]>
[ Upstream commit 172c238612ebf81cabccc86b788c9209af591f61 ]
A thin-pool that is in out-of-data-space (OODS) mode may transition back
to write mode -- without the admin adding more space to the thin-pool --
if/when blocks are released (either by deleting thin devices or
discarding provisioned blocks).
But as part of the thin-pool's earlier transition to out-of-data-space
mode the thin-pool may have set the 'error_if_no_space' flag to true if
the no_space_timeout expires without more space having been made
available. That implementation detail, of changing the pool's
error_if_no_space setting, needs to be reset back to the default that
the user specified when the thin-pool's table was loaded.
Otherwise we'll drop the user requested behaviour on the floor when this
out-of-data-space to write mode transition occurs.
Reported-by: Vivek Goyal <[email protected]>
Signed-off-by: Mike Snitzer <[email protected]>
Acked-by: Joe Thornber <[email protected]>
Fixes: 2c43fd26e4 ("dm thin: fix missing out-of-data-space to write mode transition if blocks are released")
Cc: [email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/md/dm-thin.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/md/dm-thin.c b/drivers/md/dm-thin.c
index 68c7102a64c8..936c57b57539 100644
--- a/drivers/md/dm-thin.c
+++ b/drivers/md/dm-thin.c
@@ -1909,6 +1909,7 @@ static void set_pool_mode(struct pool *pool, enum pool_mode new_mode)
case PM_WRITE:
if (old_mode != new_mode)
notify_of_pool_mode_change(pool, "write");
+ pool->pf.error_if_no_space = pt->requested_pf.error_if_no_space;
dm_pool_metadata_read_write(pool->pmd);
pool->process_bio = process_bio;
pool->process_discard = process_discard;
--
2.17.1
From: Suman Tripathi <[email protected]>
[ Upstream commit 1102407bb714dcebb43f385335bcb72f6b8843bc ]
This patch addresses the issue with ATA_CMD_PACKET pio mode
command for enumeration and device detection with ATAPI devices.
The X-Gene AHCI controller has an errata in which it cannot clear
the BSY bit after the PIO setup FIS. The dma state machine enters
CMFatalErrorUpdate state and locks up.
Signed-off-by: Suman Tripathi <[email protected]>
Signed-off-by: Tejun Heo <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/ata/ahci_xgene.c | 12 +++++++-----
1 file changed, 7 insertions(+), 5 deletions(-)
diff --git a/drivers/ata/ahci_xgene.c b/drivers/ata/ahci_xgene.c
index 0ffd3c930bed..d33216155827 100644
--- a/drivers/ata/ahci_xgene.c
+++ b/drivers/ata/ahci_xgene.c
@@ -125,10 +125,11 @@ static int xgene_ahci_restart_engine(struct ata_port *ap)
* xgene_ahci_qc_issue - Issue commands to the device
* @qc: Command to issue
*
- * Due to Hardware errata for IDENTIFY DEVICE command, the controller cannot
- * clear the BSY bit after receiving the PIO setup FIS. This results in the dma
- * state machine goes into the CMFatalErrorUpdate state and locks up. By
- * restarting the dma engine, it removes the controller out of lock up state.
+ * Due to Hardware errata for IDENTIFY DEVICE command and PACKET
+ * command of ATAPI protocol set, the controller cannot clear the BSY bit
+ * after receiving the PIO setup FIS. This results in the DMA state machine
+ * going into the CMFatalErrorUpdate state and locks up. By restarting the
+ * DMA engine, it removes the controller out of lock up state.
*/
static unsigned int xgene_ahci_qc_issue(struct ata_queued_cmd *qc)
{
@@ -137,7 +138,8 @@ static unsigned int xgene_ahci_qc_issue(struct ata_queued_cmd *qc)
struct xgene_ahci_context *ctx = hpriv->plat_data;
int rc = 0;
- if (unlikely(ctx->last_cmd[ap->port_no] == ATA_CMD_ID_ATA))
+ if (unlikely((ctx->last_cmd[ap->port_no] == ATA_CMD_ID_ATA) ||
+ (ctx->last_cmd[ap->port_no] == ATA_CMD_PACKET)))
xgene_ahci_restart_engine(ap);
rc = ahci_qc_issue(qc);
--
2.17.1
From: Dan Carpenter <[email protected]>
[ Upstream commit 42d6cfa0caec4b68a7f17147fbf13a36e94a8bf2 ]
We try to free an ERR_PTR on this error path.
Fixes: b44be2462dbe ('usb: gadget: gadgetfs: Free memory allocated by memdup_user()')
Signed-off-by: Dan Carpenter <[email protected]>
Signed-off-by: Felipe Balbi <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/usb/gadget/legacy/inode.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/usb/gadget/legacy/inode.c b/drivers/usb/gadget/legacy/inode.c
index e2d57e3d67c7..7974956e8ded 100644
--- a/drivers/usb/gadget/legacy/inode.c
+++ b/drivers/usb/gadget/legacy/inode.c
@@ -442,6 +442,7 @@ ep_write (struct file *fd, const char __user *buf, size_t len, loff_t *ptr)
kbuf = memdup_user(buf, len);
if (IS_ERR(kbuf)) {
value = PTR_ERR(kbuf);
+ kbuf = NULL;
goto free1;
}
--
2.17.1
From: Geert Uytterhoeven <[email protected]>
[ Upstream commit d034f53cc6c5c09a4e10cb9716986f3844c58514 ]
As of commit 9a1091ef0017c40a ("irqchip: gic: Support hierarchy irq
domain."), armadillo-legacy hangs during boot with:
sh-tmu.0: ch0: used for clock events
sh-tmu.0: ch0: used for periodic clock events
sh-tmu.0: ch0: failed to request irq 230
sh-tmu.0: ch1: used as clock source
sh-cmt-48.1: ch0: failed to request irq 90
sh-cmt-48.1: ch0: registration failed
earlytimer: unable to probe sh-cmt-48 early.
Calibrating delay loop...
This happens because the IRQ numbers of the GIC are now virtual, and no
longer match the hardcoded hardware IRQ numbers in the platform board
code.
To fix this, instantiate the GIC from platform board code when compiling
a legacy kernel, like is done on sh73a0 for kzm9g-legacy.
Signed-off-by: Geert Uytterhoeven <[email protected]>
Acked-by: Marc Zyngier <[email protected]>
Signed-off-by: Simon Horman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm/mach-shmobile/setup-r8a7740.c | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/arch/arm/mach-shmobile/setup-r8a7740.c b/arch/arm/mach-shmobile/setup-r8a7740.c
index 8894e1b7ab0e..6ccdc4574c89 100644
--- a/arch/arm/mach-shmobile/setup-r8a7740.c
+++ b/arch/arm/mach-shmobile/setup-r8a7740.c
@@ -792,7 +792,14 @@ void __init r8a7740_init_irq_of(void)
void __iomem *intc_msk_base = ioremap_nocache(0xe6900040, 0x10);
void __iomem *pfc_inta_ctrl = ioremap_nocache(0xe605807c, 0x4);
+#ifdef CONFIG_ARCH_SHMOBILE_LEGACY
+ void __iomem *gic_dist_base = ioremap_nocache(0xc2800000, 0x1000);
+ void __iomem *gic_cpu_base = ioremap_nocache(0xc2000000, 0x1000);
+
+ gic_init(0, 29, gic_dist_base, gic_cpu_base);
+#else
irqchip_init();
+#endif
/* route signals to GIC */
iowrite32(0x0, pfc_inta_ctrl);
--
2.17.1
From: Colin Ian King <[email protected]>
[ Upstream commit ef6899cdc8608e2f018e590683f04bb04a069704 ]
static code analysis from cppcheck reports:
[drivers/video/fbdev/broadsheetfb.c:673]:
(error) Memory leak: sector_buffer
sector_buffer is not being kfree'd on each call to
broadsheet_spiflash_rewrite_sector(), so free it.
Signed-off-by: Colin Ian King <[email protected]>
Signed-off-by: Tomi Valkeinen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/video/fbdev/broadsheetfb.c | 8 +++++---
1 file changed, 5 insertions(+), 3 deletions(-)
diff --git a/drivers/video/fbdev/broadsheetfb.c b/drivers/video/fbdev/broadsheetfb.c
index 8556264b16b7..235542f42da9 100644
--- a/drivers/video/fbdev/broadsheetfb.c
+++ b/drivers/video/fbdev/broadsheetfb.c
@@ -636,7 +636,7 @@ static int broadsheet_spiflash_rewrite_sector(struct broadsheetfb_par *par,
err = broadsheet_spiflash_read_range(par, start_sector_addr,
data_start_addr, sector_buffer);
if (err)
- return err;
+ goto out;
}
/* now we copy our data into the right place in the sector buffer */
@@ -657,7 +657,7 @@ static int broadsheet_spiflash_rewrite_sector(struct broadsheetfb_par *par,
err = broadsheet_spiflash_read_range(par, tail_start_addr,
tail_len, sector_buffer + tail_start_addr);
if (err)
- return err;
+ goto out;
}
/* if we got here we have the full sector that we want to rewrite. */
@@ -665,11 +665,13 @@ static int broadsheet_spiflash_rewrite_sector(struct broadsheetfb_par *par,
/* first erase the sector */
err = broadsheet_spiflash_erase_sector(par, start_sector_addr);
if (err)
- return err;
+ goto out;
/* now write it */
err = broadsheet_spiflash_write_sector(par, start_sector_addr,
sector_buffer, sector_size);
+out:
+ kfree(sector_buffer);
return err;
}
--
2.17.1
From: Alexey Brodkin <[email protected]>
[ Upstream commit db1806edcfef007d9594435a331dcf7e7f1b8fac ]
ARC Linux uses the no legacy syscalls abi and corresponding uClibc headers
statfs defines f_type to be U32 which causes perf build breakage
http://git.uclibc.org/uClibc/tree/libc/sysdeps/linux/common-generic/bits/statfs.h
----------->8---------------
CC fs/fs.o
fs/fs.c: In function 'fs__valid_mount':
fs/fs.c:82:24: error: comparison between signed and unsigned integer
expressions [-Werror=sign-compare]
else if (st_fs.f_type != magic)
^
cc1: all warnings being treated as errors
----------->8---------------
Signed-off-by: Alexey Brodkin <[email protected]>
Acked-by: Jiri Olsa <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: Cody P Schafer <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Vineet Gupta <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
tools/lib/api/fs/debugfs.c | 2 +-
tools/lib/api/fs/fs.c | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/tools/lib/api/fs/debugfs.c b/tools/lib/api/fs/debugfs.c
index a74fba6d7743..86ea2d7b8845 100644
--- a/tools/lib/api/fs/debugfs.c
+++ b/tools/lib/api/fs/debugfs.c
@@ -67,7 +67,7 @@ int debugfs_valid_mountpoint(const char *debugfs)
if (statfs(debugfs, &st_fs) < 0)
return -ENOENT;
- else if (st_fs.f_type != (long) DEBUGFS_MAGIC)
+ else if ((long)st_fs.f_type != (long)DEBUGFS_MAGIC)
return -ENOENT;
return 0;
diff --git a/tools/lib/api/fs/fs.c b/tools/lib/api/fs/fs.c
index c1b49c36a951..4b2fa7bcbb84 100644
--- a/tools/lib/api/fs/fs.c
+++ b/tools/lib/api/fs/fs.c
@@ -75,7 +75,7 @@ static int fs__valid_mount(const char *fs, long magic)
if (statfs(fs, &st_fs) < 0)
return -ENOENT;
- else if (st_fs.f_type != magic)
+ else if ((long)st_fs.f_type != magic)
return -ENOENT;
return 0;
--
2.17.1
From: Wenyou Yang <[email protected]>
[ Upstream commit b8659752c37ec157ee254cff443b1c9d523aea22 ]
Appearance: On some SAMA5D4EK boards, after power up, the Eth1 doesn't work.
Reason: The PIOE2 pin is connected to the NAND_Tree# of KSZ8081,
But it outputs LOW during the reset period, which cause the NAND_Tree# enabled.
Add phy_fixup() to disable NAND_Tree by overriding the Operation
Mode Strap Override register(i.e. Register 16h) to clear the NAND_Tree bit.
Signed-off-by: Wenyou Yang <[email protected]>
Signed-off-by: Nicolas Ferre <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm/mach-at91/board-dt-sama5.c | 18 ++++++++++++++++++
1 file changed, 18 insertions(+)
diff --git a/arch/arm/mach-at91/board-dt-sama5.c b/arch/arm/mach-at91/board-dt-sama5.c
index 129e2917506b..5e4cedfa5c51 100644
--- a/arch/arm/mach-at91/board-dt-sama5.c
+++ b/arch/arm/mach-at91/board-dt-sama5.c
@@ -17,6 +17,7 @@
#include <linux/of_platform.h>
#include <linux/phy.h>
#include <linux/clk-provider.h>
+#include <linux/phy.h>
#include <asm/setup.h>
#include <asm/irq.h>
@@ -27,8 +28,25 @@
#include "at91_aic.h"
#include "generic.h"
+static int ksz8081_phy_fixup(struct phy_device *phy)
+{
+ int value;
+
+ value = phy_read(phy, 0x16);
+ value &= ~0x20;
+ phy_write(phy, 0x16, value);
+
+ return 0;
+}
+
static void __init sama5_dt_device_init(void)
{
+ if (of_machine_is_compatible("atmel,sama5d4ek") &&
+ IS_ENABLED(CONFIG_PHYLIB)) {
+ phy_register_fixup_for_id("fc028000.etherne:00",
+ ksz8081_phy_fixup);
+ }
+
of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
}
--
2.17.1
From: Srikar Dronamraju <[email protected]>
[ Upstream commit 2b42b09b88c831ba4da2d669581dde371c38c2af ]
With commit: e1e455f4f4d3 (perf tools: Work around lack of sched_getcpu
in glibc < 2.6), perf_bench numa mem with -c or -m option is not able to
correctly calculate convergence.
With the above commit, sched_getcpu always seems to return -1. The
intention of commit e1e455f was to add a sched_getcpu in glibc < 2.6.
Hence keep the sched_getcpu definition under an ifdef.
This regression happened occurred between v4.0 and v4.1
Signed-off-by: Srikar Dronamraju <[email protected]>
Acked-by: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Masami Hiramatsu <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Vinson Lee <[email protected]>
Fixes: e1e455f4f4d3 ("perf tools: Work around lack of sched_getcpu in glibc < 2.6")
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
tools/perf/util/cloexec.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/tools/perf/util/cloexec.c b/tools/perf/util/cloexec.c
index 85b523885f9d..2babddaa2481 100644
--- a/tools/perf/util/cloexec.c
+++ b/tools/perf/util/cloexec.c
@@ -7,11 +7,15 @@
static unsigned long flag = PERF_FLAG_FD_CLOEXEC;
+#ifdef __GLIBC_PREREQ
+#if !__GLIBC_PREREQ(2, 6)
int __weak sched_getcpu(void)
{
errno = ENOSYS;
return -1;
}
+#endif
+#endif
static int perf_flag_probe(void)
{
--
2.17.1
From: Ken Xue <[email protected]>
[ Upstream commit 1c69d3b6eb73e466ecbb8edaf1bc7fd585b288da ]
This reverts commit 49718f0fb8c9 ("SCSI: Fix NULL pointer dereference in
runtime PM")
The old commit may lead to a issue that blk_{pre|post}_runtime_suspend and
blk_{pre|post}_runtime_resume may not be called in pairs.
Take sr device as example, when sr device goes to runtime suspend,
blk_{pre|post}_runtime_suspend will be called since sr device defined
pm->runtime_suspend. But blk_{pre|post}_runtime_resume will not be called
since sr device doesn't have pm->runtime_resume. so, sr device can not
resume correctly anymore.
More discussion can be found from below link.
http://marc.info/?l=linux-scsi&m=144163730531875&w=2
Signed-off-by: Ken Xue <[email protected]>
Acked-by: Alan Stern <[email protected]>
Cc: Xiangliang Yu <[email protected]>
Cc: James E.J. Bottomley <[email protected]>
Cc: Jens Axboe <[email protected]>
Cc: Michael Terry <[email protected]>
Cc: [email protected]
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/scsi/scsi_pm.c | 20 ++++++++++----------
1 file changed, 10 insertions(+), 10 deletions(-)
diff --git a/drivers/scsi/scsi_pm.c b/drivers/scsi/scsi_pm.c
index a2dcf6a54ec6..75320dad9677 100644
--- a/drivers/scsi/scsi_pm.c
+++ b/drivers/scsi/scsi_pm.c
@@ -221,13 +221,13 @@ static int sdev_runtime_suspend(struct device *dev)
struct scsi_device *sdev = to_scsi_device(dev);
int err = 0;
- if (pm && pm->runtime_suspend) {
- err = blk_pre_runtime_suspend(sdev->request_queue);
- if (err)
- return err;
+ err = blk_pre_runtime_suspend(sdev->request_queue);
+ if (err)
+ return err;
+ if (pm && pm->runtime_suspend)
err = pm->runtime_suspend(dev);
- blk_post_runtime_suspend(sdev->request_queue, err);
- }
+ blk_post_runtime_suspend(sdev->request_queue, err);
+
return err;
}
@@ -250,11 +250,11 @@ static int sdev_runtime_resume(struct device *dev)
const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL;
int err = 0;
- if (pm && pm->runtime_resume) {
- blk_pre_runtime_resume(sdev->request_queue);
+ blk_pre_runtime_resume(sdev->request_queue);
+ if (pm && pm->runtime_resume)
err = pm->runtime_resume(dev);
- blk_post_runtime_resume(sdev->request_queue, err);
- }
+ blk_post_runtime_resume(sdev->request_queue, err);
+
return err;
}
--
2.17.1
From: Peter Zijlstra <[email protected]>
[ Upstream commit 642c2d671ceff40e9453203ea0c66e991e11e249 ]
Dmitry reported a fairly silly recursive lock deadlock for
PERF_EVENT_IOC_PERIOD, fix this by explicitly doing the inactive part of
__perf_event_period() instead of calling that function.
Reported-by: Dmitry Vyukov <[email protected]>
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Cc: <[email protected]>
Cc: Alexander Potapenko <[email protected]>
Cc: Arnaldo Carvalho de Melo <[email protected]>
Cc: Arnaldo Carvalho de Melo <[email protected]>
Cc: Eric Dumazet <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kostya Serebryany <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Sasha Levin <[email protected]>
Cc: Stephane Eranian <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Vince Weaver <[email protected]>
Fixes: c7999c6f3fed ("perf: Fix PERF_EVENT_IOC_PERIOD migration race")
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Ingo Molnar <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
kernel/events/core.c | 9 ++++++++-
1 file changed, 8 insertions(+), 1 deletion(-)
diff --git a/kernel/events/core.c b/kernel/events/core.c
index 1f08f691de59..7b2f9d432fe7 100644
--- a/kernel/events/core.c
+++ b/kernel/events/core.c
@@ -3929,7 +3929,14 @@ static int perf_event_period(struct perf_event *event, u64 __user *arg)
goto retry;
}
- __perf_event_period(&pe);
+ if (event->attr.freq) {
+ event->attr.sample_freq = value;
+ } else {
+ event->attr.sample_period = value;
+ event->hw.sample_period = value;
+ }
+
+ local64_set(&event->hw.period_left, 0);
raw_spin_unlock_irq(&ctx->lock);
return 0;
--
2.17.1
From: "Steven Rostedt (Red Hat)" <[email protected]>
[ Upstream commit ce1039bd3a89e99e4f624e75fb1777fc92d76eb3 ]
Commit 5f893b2639b2 "tracing: Move enabling tracepoints to just after
rcu_init()" broke the enabling of system call events from the command
line. The reason was that the enabling of command line trace events
was moved before PID 1 started, and the syscall tracepoints require
that all tasks have the TIF_SYSCALL_TRACEPOINT flag set. But the
swapper task (pid 0) is not part of that. Since the swapper task is the
only task that is running at this early in boot, no task gets the
flag set, and the tracepoint never gets reached.
Instead of setting the swapper task flag (there should be no reason to
do that), re-enabled trace events again after the init thread (PID 1)
has been started. It requires disabling all command line events and
re-enabling them, as just enabling them again will not reset the logic
to set the TIF_SYSCALL_TRACEPOINT flag, as the syscall tracepoint will
be fooled into thinking that it was already set, and wont try setting
it again. For this reason, we must first disable it and re-enable it.
Link: http://lkml.kernel.org/r/[email protected]
Link: http://lkml.kernel.org/r/[email protected]
Reported-by: Michael Ellerman <[email protected]>
Signed-off-by: Steven Rostedt <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
kernel/trace/trace_events.c | 69 +++++++++++++++++++++++++++++--------
1 file changed, 55 insertions(+), 14 deletions(-)
diff --git a/kernel/trace/trace_events.c b/kernel/trace/trace_events.c
index 51c47bc832d4..edf6ab4d8650 100644
--- a/kernel/trace/trace_events.c
+++ b/kernel/trace/trace_events.c
@@ -2400,12 +2400,39 @@ static __init int event_trace_memsetup(void)
return 0;
}
+static __init void
+early_enable_events(struct trace_array *tr, bool disable_first)
+{
+ char *buf = bootup_event_buf;
+ char *token;
+ int ret;
+
+ while (true) {
+ token = strsep(&buf, ",");
+
+ if (!token)
+ break;
+ if (!*token)
+ continue;
+
+ /* Restarting syscalls requires that we stop them first */
+ if (disable_first)
+ ftrace_set_clr_event(tr, token, 0);
+
+ ret = ftrace_set_clr_event(tr, token, 1);
+ if (ret)
+ pr_warn("Failed to enable trace event: %s\n", token);
+
+ /* Put back the comma to allow this to be called again */
+ if (buf)
+ *(buf - 1) = ',';
+ }
+}
+
static __init int event_trace_enable(void)
{
struct trace_array *tr = top_trace_array();
struct ftrace_event_call **iter, *call;
- char *buf = bootup_event_buf;
- char *token;
int ret;
if (!tr)
@@ -2427,18 +2454,7 @@ static __init int event_trace_enable(void)
*/
__trace_early_add_events(tr);
- while (true) {
- token = strsep(&buf, ",");
-
- if (!token)
- break;
- if (!*token)
- continue;
-
- ret = ftrace_set_clr_event(tr, token, 1);
- if (ret)
- pr_warn("Failed to enable trace event: %s\n", token);
- }
+ early_enable_events(tr, false);
trace_printk_start_comm();
@@ -2449,6 +2465,31 @@ static __init int event_trace_enable(void)
return 0;
}
+/*
+ * event_trace_enable() is called from trace_event_init() first to
+ * initialize events and perhaps start any events that are on the
+ * command line. Unfortunately, there are some events that will not
+ * start this early, like the system call tracepoints that need
+ * to set the TIF_SYSCALL_TRACEPOINT flag of pid 1. But event_trace_enable()
+ * is called before pid 1 starts, and this flag is never set, making
+ * the syscall tracepoint never get reached, but the event is enabled
+ * regardless (and not doing anything).
+ */
+static __init int event_trace_enable_again(void)
+{
+ struct trace_array *tr;
+
+ tr = top_trace_array();
+ if (!tr)
+ return -ENODEV;
+
+ early_enable_events(tr, true);
+
+ return 0;
+}
+
+early_initcall(event_trace_enable_again);
+
static __init int event_trace_init(void)
{
struct trace_array *tr;
--
2.17.1
From: Hannes Frederic Sowa <[email protected]>
[ Upstream commit 415e3d3e90ce9e18727e8843ae343eda5a58fad6 ]
The commit referenced in the Fixes tag incorrectly accounted the number
of in-flight fds over a unix domain socket to the original opener
of the file-descriptor. This allows another process to arbitrary
deplete the original file-openers resource limit for the maximum of
open files. Instead the sending processes and its struct cred should
be credited.
To do so, we add a reference counted struct user_struct pointer to the
scm_fp_list and use it to account for the number of inflight unix fds.
Fixes: 712f4aad406bb1 ("unix: properly account for FDs passed over unix sockets")
Reported-by: David Herrmann <[email protected]>
Cc: David Herrmann <[email protected]>
Cc: Willy Tarreau <[email protected]>
Cc: Linus Torvalds <[email protected]>
Suggested-by: Linus Torvalds <[email protected]>
Signed-off-by: Hannes Frederic Sowa <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
include/net/af_unix.h | 4 ++--
include/net/scm.h | 1 +
net/core/scm.c | 7 +++++++
net/unix/af_unix.c | 4 ++--
net/unix/garbage.c | 8 ++++----
5 files changed, 16 insertions(+), 8 deletions(-)
diff --git a/include/net/af_unix.h b/include/net/af_unix.h
index e830c3dff61a..7bb69c9c3c43 100644
--- a/include/net/af_unix.h
+++ b/include/net/af_unix.h
@@ -6,8 +6,8 @@
#include <linux/mutex.h>
#include <net/sock.h>
-void unix_inflight(struct file *fp);
-void unix_notinflight(struct file *fp);
+void unix_inflight(struct user_struct *user, struct file *fp);
+void unix_notinflight(struct user_struct *user, struct file *fp);
void unix_gc(void);
void wait_for_unix_gc(void);
struct sock *unix_get_socket(struct file *filp);
diff --git a/include/net/scm.h b/include/net/scm.h
index 262532d111f5..59fa93c01d2a 100644
--- a/include/net/scm.h
+++ b/include/net/scm.h
@@ -21,6 +21,7 @@ struct scm_creds {
struct scm_fp_list {
short count;
short max;
+ struct user_struct *user;
struct file *fp[SCM_MAX_FD];
};
diff --git a/net/core/scm.c b/net/core/scm.c
index d30eb057fa7b..cad57a1390dd 100644
--- a/net/core/scm.c
+++ b/net/core/scm.c
@@ -87,6 +87,7 @@ static int scm_fp_copy(struct cmsghdr *cmsg, struct scm_fp_list **fplp)
*fplp = fpl;
fpl->count = 0;
fpl->max = SCM_MAX_FD;
+ fpl->user = NULL;
}
fpp = &fpl->fp[fpl->count];
@@ -107,6 +108,10 @@ static int scm_fp_copy(struct cmsghdr *cmsg, struct scm_fp_list **fplp)
*fpp++ = file;
fpl->count++;
}
+
+ if (!fpl->user)
+ fpl->user = get_uid(current_user());
+
return num;
}
@@ -119,6 +124,7 @@ void __scm_destroy(struct scm_cookie *scm)
scm->fp = NULL;
for (i=fpl->count-1; i>=0; i--)
fput(fpl->fp[i]);
+ free_uid(fpl->user);
kfree(fpl);
}
}
@@ -337,6 +343,7 @@ struct scm_fp_list *scm_fp_dup(struct scm_fp_list *fpl)
for (i = 0; i < fpl->count; i++)
get_file(fpl->fp[i]);
new_fpl->max = new_fpl->count;
+ new_fpl->user = get_uid(fpl->user);
}
return new_fpl;
}
diff --git a/net/unix/af_unix.c b/net/unix/af_unix.c
index 29b1f4dc48ca..1bd4ba6b6aa4 100644
--- a/net/unix/af_unix.c
+++ b/net/unix/af_unix.c
@@ -1469,7 +1469,7 @@ static void unix_detach_fds(struct scm_cookie *scm, struct sk_buff *skb)
UNIXCB(skb).fp = NULL;
for (i = scm->fp->count-1; i >= 0; i--)
- unix_notinflight(scm->fp->fp[i]);
+ unix_notinflight(scm->fp->user, scm->fp->fp[i]);
}
static void unix_destruct_scm(struct sk_buff *skb)
@@ -1534,7 +1534,7 @@ static int unix_attach_fds(struct scm_cookie *scm, struct sk_buff *skb)
return -ENOMEM;
for (i = scm->fp->count - 1; i >= 0; i--)
- unix_inflight(scm->fp->fp[i]);
+ unix_inflight(scm->fp->user, scm->fp->fp[i]);
return max_level;
}
diff --git a/net/unix/garbage.c b/net/unix/garbage.c
index 58783dcfd35d..1105a60468ac 100644
--- a/net/unix/garbage.c
+++ b/net/unix/garbage.c
@@ -122,7 +122,7 @@ struct sock *unix_get_socket(struct file *filp)
* descriptor if it is for an AF_UNIX socket.
*/
-void unix_inflight(struct file *fp)
+void unix_inflight(struct user_struct *user, struct file *fp)
{
struct sock *s = unix_get_socket(fp);
@@ -139,11 +139,11 @@ void unix_inflight(struct file *fp)
}
unix_tot_inflight++;
}
- fp->f_cred->user->unix_inflight++;
+ user->unix_inflight++;
spin_unlock(&unix_gc_lock);
}
-void unix_notinflight(struct file *fp)
+void unix_notinflight(struct user_struct *user, struct file *fp)
{
struct sock *s = unix_get_socket(fp);
@@ -158,7 +158,7 @@ void unix_notinflight(struct file *fp)
list_del_init(&u->link);
unix_tot_inflight--;
}
- fp->f_cred->user->unix_inflight--;
+ user->unix_inflight--;
spin_unlock(&unix_gc_lock);
}
--
2.17.1
From: Prarit Bhargava <[email protected]>
[ Upstream commit da77b67195de1c65bef4908fa29967c4d0af2da2 ]
Commit b894157145e4 ("x86/PCI: Mark Broadwell-EP Home Agent & PCU as having
non-compliant BARs") marked Home Agent 0 & PCU has having non-compliant
BARs. Home Agent 1 also has non-compliant BARs.
Mark Home Agent 1 as having non-compliant BARs so the PCI core doesn't
touch them.
The problem with these devices is documented in the Xeon v4 specification
update:
BDF2 PCI BARs in the Home Agent Will Return Non-Zero Values
During Enumeration
Problem: During system initialization the Operating System may access
the standard PCI BARs (Base Address Registers). Due to
this erratum, accesses to the Home Agent BAR registers (Bus
1; Device 18; Function 0,4; Offsets (0x14-0x24) will return
non-zero values.
Implication: The operating system may issue a warning. Intel has not
observed any functional failures due to this erratum.
Link: http://www.intel.com/content/www/us/en/processors/xeon/xeon-e5-v4-spec-update.html
Fixes: b894157145e4 ("x86/PCI: Mark Broadwell-EP Home Agent & PCU as having non-compliant BARs")
Signed-off-by: Prarit Bhargava <[email protected]>
Signed-off-by: Bjorn Helgaas <[email protected]>
CC: Thomas Gleixner <[email protected]>
CC: Ingo Molnar <[email protected]>
CC: "H. Peter Anvin" <[email protected]>
CC: Andi Kleen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/x86/pci/fixup.c | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/arch/x86/pci/fixup.c b/arch/x86/pci/fixup.c
index f16af96c60a2..156fbb69031c 100644
--- a/arch/x86/pci/fixup.c
+++ b/arch/x86/pci/fixup.c
@@ -554,9 +554,16 @@ static void twinhead_reserve_killing_zone(struct pci_dev *dev)
}
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x27B9, twinhead_reserve_killing_zone);
+/*
+ * Broadwell EP Home Agent BARs erroneously return non-zero values when read.
+ *
+ * See http://www.intel.com/content/www/us/en/processors/xeon/xeon-e5-v4-spec-update.html
+ * entry BDF2.
+ */
static void pci_bdwep_bar(struct pci_dev *dev)
{
dev->non_compliant_bars = 1;
}
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x6f60, pci_bdwep_bar);
DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x6fa0, pci_bdwep_bar);
DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x6fc0, pci_bdwep_bar);
--
2.17.1
From: "Paul E. McKenney" <[email protected]>
[ Upstream commit c0135d07b013fa8f7ba9ec91b4369c372e6a28cb ]
If the scheduling-clock interrupt sets the current tasks need_qs flag,
but if the current CPU passes through a quiescent state in the meantime,
then rcu_preempt_qs() will fail to clear the need_qs flag, which can fool
RCU into thinking that additional rcu_read_unlock_special() processing
is needed. This commit therefore clears the need_qs flag before checking
for additional processing.
For this problem to occur, we need rcu_preempt_data.passed_quiesce equal
to true and current->rcu_read_unlock_special.b.need_qs also equal to true.
This condition can occur as follows:
1. CPU 0 is aware of the current preemptible RCU grace period,
but has not yet passed through a quiescent state. Among other
things, this means that rcu_preempt_data.passed_quiesce is false.
2. Task A running on CPU 0 enters a preemptible RCU read-side
critical section.
3. CPU 0 takes a scheduling-clock interrupt, which notices the
RCU read-side critical section and the need for a quiescent state,
and thus sets current->rcu_read_unlock_special.b.need_qs to true.
4. Task A is preempted, enters the scheduler, eventually invoking
rcu_preempt_note_context_switch() which in turn invokes
rcu_preempt_qs().
Because rcu_preempt_data.passed_quiesce is false,
control enters the body of the "if" statement, which sets
rcu_preempt_data.passed_quiesce to true.
5. At this point, CPU 0 takes an interrupt. The interrupt
handler contains an RCU read-side critical section, and
the rcu_read_unlock() notes that current->rcu_read_unlock_special
is nonzero, and thus invokes rcu_read_unlock_special().
6. Once in rcu_read_unlock_special(), the fact that
current->rcu_read_unlock_special.b.need_qs is true becomes
apparent, so rcu_read_unlock_special() invokes rcu_preempt_qs().
Recursively, given that we interrupted out of that same
function in the preceding step.
7. Because rcu_preempt_data.passed_quiesce is now true,
rcu_preempt_qs() does nothing, and simply returns.
8. Upon return to rcu_read_unlock_special(), it is noted that
current->rcu_read_unlock_special is still nonzero (because
the interrupted rcu_preempt_qs() had not yet gotten around
to clearing current->rcu_read_unlock_special.b.need_qs).
9. Execution proceeds to the WARN_ON_ONCE(), which notes that
we are in an interrupt handler and thus duly splats.
The solution, as noted above, is to make rcu_read_unlock_special()
clear out current->rcu_read_unlock_special.b.need_qs after calling
rcu_preempt_qs(). The interrupted rcu_preempt_qs() will clear it again,
but this is harmless. The worst that happens is that we clobber another
attempt to set this field, but this is not a problem because we just
got done reporting a quiescent state.
Reported-by: Sasha Levin <[email protected]>
Signed-off-by: Paul E. McKenney <[email protected]>
[ paulmck: Fix embarrassing build bug noted by Sasha Levin. ]
Tested-by: Sasha Levin <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
kernel/rcu/tree_plugin.h | 1 +
1 file changed, 1 insertion(+)
diff --git a/kernel/rcu/tree_plugin.h b/kernel/rcu/tree_plugin.h
index c1d7f27bd38f..c038831bfa57 100644
--- a/kernel/rcu/tree_plugin.h
+++ b/kernel/rcu/tree_plugin.h
@@ -328,6 +328,7 @@ void rcu_read_unlock_special(struct task_struct *t)
special = t->rcu_read_unlock_special;
if (special.b.need_qs) {
rcu_preempt_qs();
+ t->rcu_read_unlock_special.b.need_qs = false;
if (!t->rcu_read_unlock_special.s) {
local_irq_restore(flags);
return;
--
2.17.1
From: Namhyung Kim <[email protected]>
[ Upstream commit 260d819e3abdbdaa2b88fb983d1314f1b263f9e2 ]
When thread__init_map_groups() fails, a new thread should be removed
from the rbtree since it's gonna be freed. Also update last match cache
only if the function succeeded.
Reported-by: David Ahern <[email protected]>
Signed-off-by: Namhyung Kim <[email protected]>
Acked-by: Jiri Olsa <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
tools/perf/util/machine.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/tools/perf/util/machine.c b/tools/perf/util/machine.c
index 34fc7c8672e4..84238a10c34b 100644
--- a/tools/perf/util/machine.c
+++ b/tools/perf/util/machine.c
@@ -389,7 +389,6 @@ static struct thread *__machine__findnew_thread(struct machine *machine,
if (th != NULL) {
rb_link_node(&th->rb_node, parent, p);
rb_insert_color(&th->rb_node, &machine->threads);
- machine->last_match = th;
/*
* We have to initialize map_groups separately
@@ -400,9 +399,12 @@ static struct thread *__machine__findnew_thread(struct machine *machine,
* leader and that would screwed the rb tree.
*/
if (thread__init_map_groups(th, machine)) {
+ rb_erase(&th->rb_node, &machine->threads);
thread__delete(th);
return NULL;
}
+
+ machine->last_match = th;
}
return th;
--
2.17.1
From: Eric Biggers <[email protected]>
[ Upstream commit d636bd9f12a66ea3775c9fabbf3f8e118253467a ]
In join_session_keyring(), if install_session_keyring_to_cred() were to
fail, we would leak the keyring reference, just like in the bug fixed by
commit 23567fd052a9 ("KEYS: Fix keyring ref leak in
join_session_keyring()"). Fortunately this cannot happen currently, but
we really should be more careful. Do this by adding and using a new
error label at which the keyring reference is dropped.
Signed-off-by: Eric Biggers <[email protected]>
Signed-off-by: David Howells <[email protected]>
Signed-off-by: James Morris <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
security/keys/process_keys.c | 7 ++++---
1 file changed, 4 insertions(+), 3 deletions(-)
diff --git a/security/keys/process_keys.c b/security/keys/process_keys.c
index 85b61a3ac981..6f32ca53456a 100644
--- a/security/keys/process_keys.c
+++ b/security/keys/process_keys.c
@@ -808,15 +808,14 @@ long join_session_keyring(const char *name)
ret = PTR_ERR(keyring);
goto error2;
} else if (keyring == new->session_keyring) {
- key_put(keyring);
ret = 0;
- goto error2;
+ goto error3;
}
/* we've got a keyring - now to install it */
ret = install_session_keyring_to_cred(new, keyring);
if (ret < 0)
- goto error2;
+ goto error3;
commit_creds(new);
mutex_unlock(&key_session_mutex);
@@ -826,6 +825,8 @@ long join_session_keyring(const char *name)
okay:
return ret;
+error3:
+ key_put(keyring);
error2:
mutex_unlock(&key_session_mutex);
error:
--
2.17.1
From: Alan Stern <[email protected]>
[ Upstream commit ca5cbc8b02f9b21cc8cd1ab36668763ec34f9ee8 ]
The early-exit pathway in hub_activate, added by commit e50293ef9775
("USB: fix invalid memory access in hub_activate()") needs
improvement. It duplicates code that is already present at the end of
the subroutine, and it neglects to undo the effect of a
usb_autopm_get_interface_no_resume() call.
This patch fixes both problems by making the early-exit pathway jump
directly to the end of the subroutine. It simplifies the code at the
end by merging two conditionals that actually test the same condition
although they appear different: If type < HUB_INIT3 then type must be
either HUB_INIT2 or HUB_INIT, and it can't be HUB_INIT because in that
case the subroutine would have exited earlier.
Signed-off-by: Alan Stern <[email protected]>
CC: <[email protected]> #4.4+
Reviewed-by: Viresh Kumar <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/usb/core/hub.c | 15 ++++++---------
1 file changed, 6 insertions(+), 9 deletions(-)
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index 164fdeddfc05..9a47a9c8ebb4 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -1000,11 +1000,8 @@ static void hub_activate(struct usb_hub *hub, enum hub_activation_type type)
device_lock(hub->intfdev);
/* Was the hub disconnected while we were waiting? */
- if (hub->disconnected) {
- device_unlock(hub->intfdev);
- kref_put(&hub->kref, hub_release);
- return;
- }
+ if (hub->disconnected)
+ goto disconnected;
if (type == HUB_INIT2)
goto init2;
goto init3;
@@ -1230,12 +1227,12 @@ static void hub_activate(struct usb_hub *hub, enum hub_activation_type type)
/* Scan all ports that need attention */
kick_hub_wq(hub);
- /* Allow autosuspend if it was suppressed */
- if (type <= HUB_INIT3)
+ if (type == HUB_INIT2 || type == HUB_INIT3) {
+ /* Allow autosuspend if it was suppressed */
+ disconnected:
usb_autopm_put_interface_async(to_usb_interface(hub->intfdev));
-
- if (type == HUB_INIT2 || type == HUB_INIT3)
device_unlock(hub->intfdev);
+ }
kref_put(&hub->kref, hub_release);
}
--
2.17.1
From: Arik Nemtsov <[email protected]>
[ Upstream commit 2b0e2b0f7bfe9a9098bda6109176adcf78f9b7ac ]
The trans cfg was not replaced for 7265-D cards. This led to a check of
the min-NVM version against a 7265-C card, causing very-old 7265-D cards
to operate incorrectly with the driver.
Fixes: 3fd0d3c170ad ("iwlwifi: pcie: support 7265-D devices")
Signed-off-by: Arik Nemtsov <[email protected]>
Signed-off-by: Emmanuel Grumbach <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/iwlwifi/pcie/drv.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/net/wireless/iwlwifi/pcie/drv.c b/drivers/net/wireless/iwlwifi/pcie/drv.c
index 8407ce5f672f..4c7be34219d7 100644
--- a/drivers/net/wireless/iwlwifi/pcie/drv.c
+++ b/drivers/net/wireless/iwlwifi/pcie/drv.c
@@ -533,8 +533,10 @@ static int iwl_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
else if (cfg == &iwl7265_n_cfg)
cfg_7265d = &iwl7265d_n_cfg;
if (cfg_7265d &&
- (iwl_trans->hw_rev & CSR_HW_REV_TYPE_MSK) == CSR_HW_REV_TYPE_7265D)
+ (iwl_trans->hw_rev & CSR_HW_REV_TYPE_MSK) == CSR_HW_REV_TYPE_7265D) {
cfg = cfg_7265d;
+ iwl_trans->cfg = cfg_7265d;
+ }
#endif
pci_set_drvdata(pdev, iwl_trans);
--
2.17.1
From: Xin Long <[email protected]>
[ Upstream commit 7a84bd46647ff181eb2659fdc99590e6f16e501d ]
Commit ed5a377d87dc ("sctp: translate host order to network order when
setting a hmacid") corrected the hmacid byte-order when setting a hmacid.
but the same issue also exists on getting a hmacid.
We fix it by changing hmacids to host order when users get them with
getsockopt.
Fixes: Commit ed5a377d87dc ("sctp: translate host order to network order when setting a hmacid")
Signed-off-by: Xin Long <[email protected]>
Acked-by: Marcelo Ricardo Leitner <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/sctp/socket.c | 9 +++++++--
1 file changed, 7 insertions(+), 2 deletions(-)
diff --git a/net/sctp/socket.c b/net/sctp/socket.c
index 13693d0adeaf..5c16d0e13987 100644
--- a/net/sctp/socket.c
+++ b/net/sctp/socket.c
@@ -5607,6 +5607,7 @@ static int sctp_getsockopt_hmac_ident(struct sock *sk, int len,
struct sctp_hmac_algo_param *hmacs;
__u16 data_len = 0;
u32 num_idents;
+ int i;
if (!ep->auth_enable)
return -EACCES;
@@ -5624,8 +5625,12 @@ static int sctp_getsockopt_hmac_ident(struct sock *sk, int len,
return -EFAULT;
if (put_user(num_idents, &p->shmac_num_idents))
return -EFAULT;
- if (copy_to_user(p->shmac_idents, hmacs->hmac_ids, data_len))
- return -EFAULT;
+ for (i = 0; i < num_idents; i++) {
+ __u16 hmacid = ntohs(hmacs->hmac_ids[i]);
+
+ if (copy_to_user(&p->shmac_idents[i], &hmacid, sizeof(__u16)))
+ return -EFAULT;
+ }
return 0;
}
--
2.17.1
From: Miklos Szeredi <[email protected]>
[ Upstream commit 1c8a47df36d72ace8cf78eb6c228aa0f8027d3c2 ]
If two overlayfs filesystems are stacked on top of each other, then we need
recursion in ovl_d_select_inode().
I guess d_backing_inode() is supposed to do that. But currently it doesn't
and that functionality is open coded in vfs_open(). This is now copied
into ovl_d_select_inode() to fix this regression.
Reported-by: Alban Crequy <[email protected]>
Signed-off-by: Miklos Szeredi <[email protected]>
Fixes: 4bacc9c9234c ("overlayfs: Make f_path always point to the overlay...")
Cc: David Howells <[email protected]>
Cc: <[email protected]> # v4.2+
Signed-off-by: Sasha Levin <[email protected]>
---
fs/overlayfs/inode.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/fs/overlayfs/inode.c b/fs/overlayfs/inode.c
index df5c2853c4e5..a01ec1836a72 100644
--- a/fs/overlayfs/inode.c
+++ b/fs/overlayfs/inode.c
@@ -377,6 +377,9 @@ struct inode *ovl_d_select_inode(struct dentry *dentry, unsigned file_flags)
ovl_path_upper(dentry, &realpath);
}
+ if (realpath.dentry->d_flags & DCACHE_OP_SELECT_INODE)
+ return realpath.dentry->d_op->d_select_inode(realpath.dentry, file_flags);
+
return d_backing_inode(realpath.dentry);
}
--
2.17.1
From: Jan Kara <[email protected]>
[ Upstream commit c725bfce7968009756ed2836a8cd7ba4dc163011 ]
Commit 296291cdd162 (mm: make sendfile(2) killable) fixed an issue where
sendfile(2) was doing a lot of tiny writes into a filesystem and thus
was unkillable for a long time. However sendfile(2) can be (mis)used to
issue lots of writes into arbitrary file descriptor such as evenfd or
similar special file descriptors which never hit the standard filesystem
write path and thus are still unkillable. E.g. the following example
from Dmitry burns CPU for ~16s on my test system without possibility to
be killed:
int r1 = eventfd(0, 0);
int r2 = memfd_create("", 0);
unsigned long n = 1<<30;
fallocate(r2, 0, 0, n);
sendfile(r1, r2, 0, n);
There are actually quite a few tests for pending signals in sendfile
code however we data to write is always available none of them seems to
trigger. So fix the problem by adding a test for pending signal into
splice_from_pipe_next() also before the loop waiting for pipe buffers to
be available. This should fix all the lockup issues with sendfile of the
do-ton-of-tiny-writes nature.
CC: [email protected]
Reported-by: Dmitry Vyukov <[email protected]>
Signed-off-by: Jan Kara <[email protected]>
Signed-off-by: Al Viro <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/splice.c | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/fs/splice.c b/fs/splice.c
index cf0cb768a1a7..852194d3ce4a 100644
--- a/fs/splice.c
+++ b/fs/splice.c
@@ -809,6 +809,13 @@ static int splice_from_pipe_feed(struct pipe_inode_info *pipe, struct splice_des
*/
static int splice_from_pipe_next(struct pipe_inode_info *pipe, struct splice_desc *sd)
{
+ /*
+ * Check for signal early to make process killable when there are
+ * always buffers available
+ */
+ if (signal_pending(current))
+ return -ERESTARTSYS;
+
while (!pipe->nrbufs) {
if (!pipe->writers)
return 0;
--
2.17.1
From: Alex Williamson <[email protected]>
[ Upstream commit 9d9240756e63dd87d6cbf5da8b98ceb8f8192b55 ]
Commit 932c435caba8 ("PCI: Add dev_flags bit to access VPD through function
0") passes PCI_SLOT(devfn) for the devfn parameter of pci_get_slot().
Generally this works because we're fairly well guaranteed that a PCIe
device is at slot address 0, but for the general case, including
conventional PCI, it's incorrect. We need to get the slot and then convert
it back into a devfn.
Fixes: 932c435caba8 ("PCI: Add dev_flags bit to access VPD through function 0")
Signed-off-by: Alex Williamson <[email protected]>
Signed-off-by: Bjorn Helgaas <[email protected]>
Acked-by: Myron Stowe <[email protected]>
Acked-by: Mark Rustad <[email protected]>
CC: [email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/pci/access.c | 9 ++++++---
1 file changed, 6 insertions(+), 3 deletions(-)
diff --git a/drivers/pci/access.c b/drivers/pci/access.c
index 7f249b9ab2ce..2f15e7bb9f44 100644
--- a/drivers/pci/access.c
+++ b/drivers/pci/access.c
@@ -355,7 +355,8 @@ static const struct pci_vpd_ops pci_vpd_pci22_ops = {
static ssize_t pci_vpd_f0_read(struct pci_dev *dev, loff_t pos, size_t count,
void *arg)
{
- struct pci_dev *tdev = pci_get_slot(dev->bus, PCI_SLOT(dev->devfn));
+ struct pci_dev *tdev = pci_get_slot(dev->bus,
+ PCI_DEVFN(PCI_SLOT(dev->devfn), 0));
ssize_t ret;
if (!tdev)
@@ -369,7 +370,8 @@ static ssize_t pci_vpd_f0_read(struct pci_dev *dev, loff_t pos, size_t count,
static ssize_t pci_vpd_f0_write(struct pci_dev *dev, loff_t pos, size_t count,
const void *arg)
{
- struct pci_dev *tdev = pci_get_slot(dev->bus, PCI_SLOT(dev->devfn));
+ struct pci_dev *tdev = pci_get_slot(dev->bus,
+ PCI_DEVFN(PCI_SLOT(dev->devfn), 0));
ssize_t ret;
if (!tdev)
@@ -388,7 +390,8 @@ static const struct pci_vpd_ops pci_vpd_f0_ops = {
static int pci_vpd_f0_dev_check(struct pci_dev *dev)
{
- struct pci_dev *tdev = pci_get_slot(dev->bus, PCI_SLOT(dev->devfn));
+ struct pci_dev *tdev = pci_get_slot(dev->bus,
+ PCI_DEVFN(PCI_SLOT(dev->devfn), 0));
int ret = 0;
if (!tdev)
--
2.17.1
From: Hannes Frederic Sowa <[email protected]>
[ Upstream commit 7bbadd2d1009575dad675afc16650ebb5aa10612 ]
Docbook does not like the definition of macros inside a field declaration
and adds a warning. Move the definition out.
Fixes: 79462ad02e86180 ("net: add validation for the socket syscall protocol argument")
Reported-by: kbuild test robot <[email protected]>
Signed-off-by: Hannes Frederic Sowa <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
include/net/sock.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/include/net/sock.h b/include/net/sock.h
index a40bc8c0af4b..76afe92a0f4a 100644
--- a/include/net/sock.h
+++ b/include/net/sock.h
@@ -379,8 +379,8 @@ struct sock {
sk_no_check_rx : 1,
sk_userlocks : 4,
sk_protocol : 8,
-#define SK_PROTOCOL_MAX U8_MAX
sk_type : 16;
+#define SK_PROTOCOL_MAX U8_MAX
kmemcheck_bitfield_end(flags);
int sk_wmem_queued;
gfp_t sk_allocation;
--
2.17.1
From: Sudip Mukherjee <[email protected]>
[ Upstream commit 136d769e0b3475d71350aa3648a116a6ee7a8f6c ]
While whitelisting Micron M500DC drives, the tweaked blacklist entry
enabled queued TRIM from M500IT variants also. But these do not support
queued TRIM. And while using those SSDs with the latest kernel we have
seen errors and even the partition table getting corrupted.
Some part from the dmesg:
[ 6.727384] ata1.00: ATA-9: Micron_M500IT_MTFDDAK060MBD, MU01, max UDMA/133
[ 6.727390] ata1.00: 117231408 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 6.741026] ata1.00: supports DRM functions and may not be fully accessible
[ 6.759887] ata1.00: configured for UDMA/133
[ 6.762256] scsi 0:0:0:0: Direct-Access ATA Micron_M500IT_MT MU01 PQ: 0 ANSI: 5
and then for the error:
[ 120.860334] ata1.00: exception Emask 0x1 SAct 0x7ffc0007 SErr 0x0 action 0x6 frozen
[ 120.860338] ata1.00: irq_stat 0x40000008
[ 120.860342] ata1.00: failed command: SEND FPDMA QUEUED
[ 120.860351] ata1.00: cmd 64/01:00:00:00:00/00:00:00:00:00/a0 tag 0 ncq dma 512 out
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x5 (timeout)
[ 120.860353] ata1.00: status: { DRDY }
[ 120.860543] ata1: hard resetting link
[ 121.166128] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 121.166376] ata1.00: supports DRM functions and may not be fully accessible
[ 121.186238] ata1.00: supports DRM functions and may not be fully accessible
[ 121.204445] ata1.00: configured for UDMA/133
[ 121.204454] ata1.00: device reported invalid CHS sector 0
[ 121.204541] sd 0:0:0:0: [sda] tag#18 UNKNOWN(0x2003) Result: hostbyte=0x00 driverbyte=0x08
[ 121.204546] sd 0:0:0:0: [sda] tag#18 Sense Key : 0x5 [current]
[ 121.204550] sd 0:0:0:0: [sda] tag#18 ASC=0x21 ASCQ=0x4
[ 121.204555] sd 0:0:0:0: [sda] tag#18 CDB: opcode=0x93 93 08 00 00 00 00 00 04 28 80 00 00 00 30 00 00
[ 121.204559] print_req_error: I/O error, dev sda, sector 272512
After few reboots with these errors, and the SSD is corrupted.
After blacklisting it, the errors are not seen and the SSD does not get
corrupted any more.
Fixes: 243918be6393 ("libata: Do not blacklist Micron M500DC")
Cc: Martin K. Petersen <[email protected]>
Cc: [email protected]
Signed-off-by: Sudip Mukherjee <[email protected]>
Signed-off-by: Tejun Heo <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/ata/libata-core.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index cd589d012ef1..6629a5deccbd 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -4249,6 +4249,8 @@ static const struct ata_blacklist_entry ata_device_blacklist [] = {
ATA_HORKAGE_NOLPM, },
/* devices that don't properly handle queued TRIM commands */
+ { "Micron_M500IT_*", "MU01", ATA_HORKAGE_NO_NCQ_TRIM |
+ ATA_HORKAGE_ZERO_AFTER_TRIM, },
{ "Micron_M500_*", NULL, ATA_HORKAGE_NO_NCQ_TRIM |
ATA_HORKAGE_ZERO_AFTER_TRIM, },
{ "Crucial_CT*M500*", NULL, ATA_HORKAGE_NO_NCQ_TRIM |
--
2.17.1
From: Jan Beulich <[email protected]>
[ Upstream commit be06998f96ecb93938ad2cce46c4289bf7cf45bc ]
The combined effect of commits 6423fc3416 ("igb: do not re-init SR-IOV
during probe") and ceee3450b3 ("igb: make sure SR-IOV init uses the
right number of queues") causes VFs no longer getting set up, leading
to NULL pointer dereferences due to the adapter's ->vf_data being NULL
while ->vfs_allocated_count is non-zero. The first commit not only
neglected the side effect of igb_sriov_reinit() that the second commit
tried to account for, but also that of setting IGB_FLAG_HAS_MSIX,
without which igb_enable_sriov() is effectively a no-op. Calling
igb_{,re}set_interrupt_capability() as done here seems to address this,
but I'm not sure whether this is better than sinply reverting the other
two commits.
Signed-off-by: Jan Beulich <[email protected]>
Tested-by: Aaron Brown <[email protected]>
Signed-off-by: Jeff Kirsher <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/intel/igb/igb_main.c | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/drivers/net/ethernet/intel/igb/igb_main.c b/drivers/net/ethernet/intel/igb/igb_main.c
index 84049078c4f0..b73c896ed184 100644
--- a/drivers/net/ethernet/intel/igb/igb_main.c
+++ b/drivers/net/ethernet/intel/igb/igb_main.c
@@ -2866,6 +2866,13 @@ static void igb_probe_vfs(struct igb_adapter *adapter)
if ((hw->mac.type == e1000_i210) || (hw->mac.type == e1000_i211))
return;
+ /* Of the below we really only want the effect of getting
+ * IGB_FLAG_HAS_MSIX set (if available), without which
+ * igb_enable_sriov() has no effect.
+ */
+ igb_set_interrupt_capability(adapter, true);
+ igb_reset_interrupt_capability(adapter);
+
pci_sriov_set_totalvfs(pdev, 7);
igb_enable_sriov(pdev, max_vfs);
--
2.17.1
From: Shota Suzuki <[email protected]>
[ Upstream commit 37a5d163fb447b39f7960d0534de30e88ad395bb ]
By the commit 72ddef0506da ("igb: Fix oops caused by missing queue
pairing"), the IGB_FLAG_QUEUE_PAIRS flag can now be set when changing the
number of queues by "ethtool -L", but it is never cleared unless the igb
driver is reloaded.
This patch clears it if queue pairing becomes unnecessary as a result of
"ethtool -L".
Signed-off-by: Shota Suzuki <[email protected]>
Tested-by: Aaron Brown <[email protected]>
Signed-off-by: Jeff Kirsher <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/intel/igb/igb_main.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/net/ethernet/intel/igb/igb_main.c b/drivers/net/ethernet/intel/igb/igb_main.c
index 1ffad88e8a29..84049078c4f0 100644
--- a/drivers/net/ethernet/intel/igb/igb_main.c
+++ b/drivers/net/ethernet/intel/igb/igb_main.c
@@ -2941,6 +2941,8 @@ void igb_set_flag_queue_pairs(struct igb_adapter *adapter,
*/
if (adapter->rss_queues > (max_rss_queues / 2))
adapter->flags |= IGB_FLAG_QUEUE_PAIRS;
+ else
+ adapter->flags &= ~IGB_FLAG_QUEUE_PAIRS;
break;
}
}
--
2.17.1
From: Filipe Manana <[email protected]>
[ Upstream commit 5cdf83edb8e41cad1ec8eab2d402b4f9d9eb7ee0 ]
The return value from btrfs_lookup_xattr() can be a pointer encoding an
error, therefore deal with it. This fixes commit 5f5bc6b1e2d5
("Btrfs: make xattr replace operations atomic").
Signed-off-by: Filipe Manana <[email protected]>
Signed-off-by: Chris Mason <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/btrfs/xattr.c | 8 ++++++--
1 file changed, 6 insertions(+), 2 deletions(-)
diff --git a/fs/btrfs/xattr.c b/fs/btrfs/xattr.c
index fbb0533e977f..de5d69a63e3f 100644
--- a/fs/btrfs/xattr.c
+++ b/fs/btrfs/xattr.c
@@ -111,6 +111,8 @@ static int do_setxattr(struct btrfs_trans_handle *trans,
name, name_len, -1);
if (!di && (flags & XATTR_REPLACE))
ret = -ENODATA;
+ else if (IS_ERR(di))
+ ret = PTR_ERR(di);
else if (di)
ret = btrfs_delete_one_dir_name(trans, root, path, di);
goto out;
@@ -127,10 +129,12 @@ static int do_setxattr(struct btrfs_trans_handle *trans,
ASSERT(mutex_is_locked(&inode->i_mutex));
di = btrfs_lookup_xattr(NULL, root, path, btrfs_ino(inode),
name, name_len, 0);
- if (!di) {
+ if (!di)
ret = -ENODATA;
+ else if (IS_ERR(di))
+ ret = PTR_ERR(di);
+ if (ret)
goto out;
- }
btrfs_release_path(path);
di = NULL;
}
--
2.17.1
From: Peter Hurley <[email protected]>
[ Upstream commit 6b2a3d628aa752f0ab825fc6d4d07b09e274d1c1 ]
The data to audit/record is in the 'from' buffer (ie., the input
read buffer).
Fixes: 72586c6061ab ("n_tty: Fix auditing support for cannonical mode")
Cc: stable <[email protected]> # 4.1+
Cc: Miloslav Trmač <[email protected]>
Signed-off-by: Peter Hurley <[email protected]>
Acked-by: Laura Abbott <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/tty/n_tty.c | 2 +-
drivers/tty/tty_audit.c | 2 +-
include/linux/tty.h | 6 +++---
3 files changed, 5 insertions(+), 5 deletions(-)
diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c
index 0ed99ad74bee..f53682bb30cf 100644
--- a/drivers/tty/n_tty.c
+++ b/drivers/tty/n_tty.c
@@ -195,7 +195,7 @@ static inline int tty_copy_to_user(struct tty_struct *tty,
{
struct n_tty_data *ldata = tty->disc_data;
- tty_audit_add_data(tty, to, n, ldata->icanon);
+ tty_audit_add_data(tty, from, n, ldata->icanon);
return copy_to_user(to, from, n);
}
diff --git a/drivers/tty/tty_audit.c b/drivers/tty/tty_audit.c
index 90ca082935f6..3d245cd3d8e6 100644
--- a/drivers/tty/tty_audit.c
+++ b/drivers/tty/tty_audit.c
@@ -265,7 +265,7 @@ static struct tty_audit_buf *tty_audit_buf_get(struct tty_struct *tty,
*
* Audit @data of @size from @tty, if necessary.
*/
-void tty_audit_add_data(struct tty_struct *tty, unsigned char *data,
+void tty_audit_add_data(struct tty_struct *tty, const void *data,
size_t size, unsigned icanon)
{
struct tty_audit_buf *buf;
diff --git a/include/linux/tty.h b/include/linux/tty.h
index 4858a3b79b7a..47d0bfa536e7 100644
--- a/include/linux/tty.h
+++ b/include/linux/tty.h
@@ -587,7 +587,7 @@ extern void n_tty_inherit_ops(struct tty_ldisc_ops *ops);
/* tty_audit.c */
#ifdef CONFIG_AUDIT
-extern void tty_audit_add_data(struct tty_struct *tty, unsigned char *data,
+extern void tty_audit_add_data(struct tty_struct *tty, const void *data,
size_t size, unsigned icanon);
extern void tty_audit_exit(void);
extern void tty_audit_fork(struct signal_struct *sig);
@@ -595,8 +595,8 @@ extern void tty_audit_tiocsti(struct tty_struct *tty, char ch);
extern void tty_audit_push(struct tty_struct *tty);
extern int tty_audit_push_current(void);
#else
-static inline void tty_audit_add_data(struct tty_struct *tty,
- unsigned char *data, size_t size, unsigned icanon)
+static inline void tty_audit_add_data(struct tty_struct *tty, const void *data,
+ size_t size, unsigned icanon)
{
}
static inline void tty_audit_tiocsti(struct tty_struct *tty, char ch)
--
2.17.1
From: Mateusz Sylwestrzak <[email protected]>
[ Upstream commit 0420694dddeb9e269a1ab2129a0119a5cea294a4 ]
Acer Aspire V5 with the ALC282 codec is given the wrong value for the
0x19 PIN by the laptop's BIOS. Overriding it with the correct value
adds support for the headset microphone which would not otherwise be
visible in the system.
The fix is based on commit 7819717b1134 with a similar quirk for Acer
Aspire with the ALC269 codec.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=96201
Cc: <[email protected]>
Signed-off-by: Mateusz Sylwestrzak <[email protected]>
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/pci/hda/patch_realtek.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
index fd3bbcf317ee..c32d51d51b3e 100644
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -5185,7 +5185,7 @@ static const struct hda_fixup alc269_fixups[] = {
{ 0x14, 0x90170110 },
{ 0x17, 0x40000008 },
{ 0x18, 0x411111f0 },
- { 0x19, 0x411111f0 },
+ { 0x19, 0x01a1913c },
{ 0x1a, 0x411111f0 },
{ 0x1b, 0x411111f0 },
{ 0x1d, 0x40f89b2d },
--
2.17.1
From: Anssi Hannula <[email protected]>
[ Upstream commit 42e3121d90f42e57f6dbd6083dff2f57b3ec7daa ]
AudioQuest DragonFly DAC reports a volume control range of 0..50
(0x0000..0x0032) which in USB Audio means a range of 0 .. 0.2dB, which
is obviously incorrect and would cause software using the dB information
in e.g. volume sliders to have a massive volume difference in 100..102%
range.
Commit 2d1cb7f658fb ("ALSA: usb-audio: add dB range mapping for some
devices") added a dB range mapping for it with range 0..50 dB.
However, the actual volume mapping seems to be neither linear volume nor
linear dB scale, but instead quite close to the cubic mapping e.g.
alsamixer uses, with a range of approx. -53...0 dB.
Replace the previous quirk with a custom dB mapping based on some basic
output measurements, using a 10-item range TLV (which will still fit in
alsa-lib MAX_TLV_RANGE_SIZE).
Tested on AudioQuest DragonFly HW v1.2. The quirk is only applied if the
range is 0..50, so if this gets fixed/changed in later HW revisions it
will no longer be applied.
v2: incorporated Takashi Iwai's suggestion for the quirk application
method
Signed-off-by: Anssi Hannula <[email protected]>
Cc: <[email protected]>
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/usb/mixer.c | 2 ++
sound/usb/mixer_maps.c | 12 ------------
sound/usb/mixer_quirks.c | 37 +++++++++++++++++++++++++++++++++++++
sound/usb/mixer_quirks.h | 4 ++++
4 files changed, 43 insertions(+), 12 deletions(-)
diff --git a/sound/usb/mixer.c b/sound/usb/mixer.c
index 8d90cc5faf88..44812e4a4890 100644
--- a/sound/usb/mixer.c
+++ b/sound/usb/mixer.c
@@ -1347,6 +1347,8 @@ static void build_feature_ctl(struct mixer_build *state, void *raw_desc,
}
}
+ snd_usb_mixer_fu_apply_quirk(state->mixer, cval, unitid, kctl);
+
range = (cval->max - cval->min) / cval->res;
/*
* Are there devices with volume range more than 255? I use a bit more
diff --git a/sound/usb/mixer_maps.c b/sound/usb/mixer_maps.c
index 2f075cd27344..f0f526ca86e5 100644
--- a/sound/usb/mixer_maps.c
+++ b/sound/usb/mixer_maps.c
@@ -343,13 +343,6 @@ static struct usbmix_name_map bose_companion5_map[] = {
{ 0 } /* terminator */
};
-/* Dragonfly DAC 1.2, the dB conversion factor is 1 instead of 256 */
-static struct usbmix_dB_map dragonfly_1_2_dB = {0, 5000};
-static struct usbmix_name_map dragonfly_1_2_map[] = {
- { 7, NULL, .dB = &dragonfly_1_2_dB },
- { 0 } /* terminator */
-};
-
/*
* Dell usb dock with ALC4020 codec had a firmware problem where it got
* screwed up when zero volume is passed; just skip it as a workaround
@@ -478,11 +471,6 @@ static struct usbmix_ctl_map usbmix_ctl_maps[] = {
.id = USB_ID(0x05a7, 0x1020),
.map = bose_companion5_map,
},
- {
- /* Dragonfly DAC 1.2 */
- .id = USB_ID(0x21b4, 0x0081),
- .map = dragonfly_1_2_map,
- },
{ 0 } /* terminator */
};
diff --git a/sound/usb/mixer_quirks.c b/sound/usb/mixer_quirks.c
index 524366f9d32d..05df7a75a2ea 100644
--- a/sound/usb/mixer_quirks.c
+++ b/sound/usb/mixer_quirks.c
@@ -37,6 +37,7 @@
#include <sound/control.h>
#include <sound/hwdep.h>
#include <sound/info.h>
+#include <sound/tlv.h>
#include "usbaudio.h"
#include "mixer.h"
@@ -1711,3 +1712,39 @@ void snd_usb_mixer_rc_memory_change(struct usb_mixer_interface *mixer,
}
}
+static void snd_dragonfly_quirk_db_scale(struct usb_mixer_interface *mixer,
+ struct snd_kcontrol *kctl)
+{
+ /* Approximation using 10 ranges based on output measurement on hw v1.2.
+ * This seems close to the cubic mapping e.g. alsamixer uses. */
+ static const DECLARE_TLV_DB_RANGE(scale,
+ 0, 1, TLV_DB_MINMAX_ITEM(-5300, -4970),
+ 2, 5, TLV_DB_MINMAX_ITEM(-4710, -4160),
+ 6, 7, TLV_DB_MINMAX_ITEM(-3884, -3710),
+ 8, 14, TLV_DB_MINMAX_ITEM(-3443, -2560),
+ 15, 16, TLV_DB_MINMAX_ITEM(-2475, -2324),
+ 17, 19, TLV_DB_MINMAX_ITEM(-2228, -2031),
+ 20, 26, TLV_DB_MINMAX_ITEM(-1910, -1393),
+ 27, 31, TLV_DB_MINMAX_ITEM(-1322, -1032),
+ 32, 40, TLV_DB_MINMAX_ITEM(-968, -490),
+ 41, 50, TLV_DB_MINMAX_ITEM(-441, 0),
+ );
+
+ usb_audio_info(mixer->chip, "applying DragonFly dB scale quirk\n");
+ kctl->tlv.p = scale;
+ kctl->vd[0].access |= SNDRV_CTL_ELEM_ACCESS_TLV_READ;
+ kctl->vd[0].access &= ~SNDRV_CTL_ELEM_ACCESS_TLV_CALLBACK;
+}
+
+void snd_usb_mixer_fu_apply_quirk(struct usb_mixer_interface *mixer,
+ struct usb_mixer_elem_info *cval, int unitid,
+ struct snd_kcontrol *kctl)
+{
+ switch (mixer->chip->usb_id) {
+ case USB_ID(0x21b4, 0x0081): /* AudioQuest DragonFly */
+ if (unitid == 7 && cval->min == 0 && cval->max == 50)
+ snd_dragonfly_quirk_db_scale(mixer, kctl);
+ break;
+ }
+}
+
diff --git a/sound/usb/mixer_quirks.h b/sound/usb/mixer_quirks.h
index bdbfab093816..177c329cd4dd 100644
--- a/sound/usb/mixer_quirks.h
+++ b/sound/usb/mixer_quirks.h
@@ -9,5 +9,9 @@ void snd_emuusb_set_samplerate(struct snd_usb_audio *chip,
void snd_usb_mixer_rc_memory_change(struct usb_mixer_interface *mixer,
int unitid);
+void snd_usb_mixer_fu_apply_quirk(struct usb_mixer_interface *mixer,
+ struct usb_mixer_elem_info *cval, int unitid,
+ struct snd_kcontrol *kctl);
+
#endif /* SND_USB_MIXER_QUIRKS_H */
--
2.17.1
From: Larry Finger <[email protected]>
[ Upstream commit 54328e64047a54b8fc2362c2e1f0fa16c90f739f ]
In commit 1277fa2ab2f9 ("rtlwifi: Remove the clear interrupt routine from all
drivers"), the code that cleared all interrupt enable bits before setting them
was removed for all PCI drivers. This fixed an issue that caused TX to be
blocked for 3-5 seconds. On some RTL8821AE units, this change causes soft
lockups to occur on boot. For that reason, the portion of the earlier commit
that applied to rtl8821ae is reverted. Kernels 4.1 and newer are affected.
See http://marc.info/?l=linux-wireless&m=144373370103285&w=2 and
https://bugzilla.opensuse.org/show_bug.cgi?id=944978 for two cases where
this regression affected user systems. Note that this bug does not appear on
any of the developer's setups. For those users whose systems are affected
by the TX blockage, but do not lock up on boot, a module parameter is added
to disable the interrupt clear
Fixes: 1277fa2ab2f9 ("rtlwifi: Remove the clear interrupt routine from all drivers")
Signed-off-by: Larry Finger <[email protected]>
Cc: Stable <[email protected]> [V4.1+]
Signed-off-by: Kalle Valo <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/rtlwifi/pci.h | 2 ++
drivers/net/wireless/rtlwifi/rtl8821ae/hw.c | 17 +++++++++++++++++
drivers/net/wireless/rtlwifi/rtl8821ae/sw.c | 5 +++++
drivers/net/wireless/rtlwifi/wifi.h | 3 +++
4 files changed, 27 insertions(+)
diff --git a/drivers/net/wireless/rtlwifi/pci.h b/drivers/net/wireless/rtlwifi/pci.h
index d4567d12e07e..5da6703942d9 100644
--- a/drivers/net/wireless/rtlwifi/pci.h
+++ b/drivers/net/wireless/rtlwifi/pci.h
@@ -247,6 +247,8 @@ struct rtl_pci {
/* MSI support */
bool msi_support;
bool using_msi;
+ /* interrupt clear before set */
+ bool int_clear;
};
struct mp_adapter {
diff --git a/drivers/net/wireless/rtlwifi/rtl8821ae/hw.c b/drivers/net/wireless/rtlwifi/rtl8821ae/hw.c
index e17b728a21aa..28b8b6a25f6d 100644
--- a/drivers/net/wireless/rtlwifi/rtl8821ae/hw.c
+++ b/drivers/net/wireless/rtlwifi/rtl8821ae/hw.c
@@ -2253,11 +2253,28 @@ void rtl8821ae_set_qos(struct ieee80211_hw *hw, int aci)
}
}
+static void rtl8821ae_clear_interrupt(struct ieee80211_hw *hw)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ u32 tmp = rtl_read_dword(rtlpriv, REG_HISR);
+
+ rtl_write_dword(rtlpriv, REG_HISR, tmp);
+
+ tmp = rtl_read_dword(rtlpriv, REG_HISRE);
+ rtl_write_dword(rtlpriv, REG_HISRE, tmp);
+
+ tmp = rtl_read_dword(rtlpriv, REG_HSISR);
+ rtl_write_dword(rtlpriv, REG_HSISR, tmp);
+}
+
void rtl8821ae_enable_interrupt(struct ieee80211_hw *hw)
{
struct rtl_priv *rtlpriv = rtl_priv(hw);
struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
+ if (!rtlpci->int_clear)
+ rtl8821ae_clear_interrupt(hw);/*clear it here first*/
+
rtl_write_dword(rtlpriv, REG_HIMR, rtlpci->irq_mask[0] & 0xFFFFFFFF);
rtl_write_dword(rtlpriv, REG_HIMRE, rtlpci->irq_mask[1] & 0xFFFFFFFF);
rtlpci->irq_enabled = true;
diff --git a/drivers/net/wireless/rtlwifi/rtl8821ae/sw.c b/drivers/net/wireless/rtlwifi/rtl8821ae/sw.c
index fc92dd6a0d07..80307d187c0a 100644
--- a/drivers/net/wireless/rtlwifi/rtl8821ae/sw.c
+++ b/drivers/net/wireless/rtlwifi/rtl8821ae/sw.c
@@ -142,6 +142,7 @@ int rtl8821ae_init_sw_vars(struct ieee80211_hw *hw)
rtl8821ae_bt_reg_init(hw);
rtlpci->msi_support = rtlpriv->cfg->mod_params->msi_support;
+ rtlpci->int_clear = rtlpriv->cfg->mod_params->int_clear;
rtlpriv->btcoexist.btc_ops = rtl_btc_get_ops_pointer();
rtlpriv->dm.dm_initialgain_enable = 1;
@@ -213,6 +214,7 @@ int rtl8821ae_init_sw_vars(struct ieee80211_hw *hw)
rtlpriv->psc.swctrl_lps = rtlpriv->cfg->mod_params->swctrl_lps;
rtlpriv->psc.fwctrl_lps = rtlpriv->cfg->mod_params->fwctrl_lps;
rtlpci->msi_support = rtlpriv->cfg->mod_params->msi_support;
+ rtlpci->msi_support = rtlpriv->cfg->mod_params->int_clear;
if (rtlpriv->cfg->mod_params->disable_watchdog)
pr_info("watchdog disabled\n");
rtlpriv->psc.reg_fwctrl_lps = 3;
@@ -334,6 +336,7 @@ static struct rtl_mod_params rtl8821ae_mod_params = {
.swctrl_lps = false,
.fwctrl_lps = true,
.msi_support = true,
+ .int_clear = true,
.debug = DBG_EMERG,
.disable_watchdog = 0,
};
@@ -463,6 +466,7 @@ module_param_named(fwlps, rtl8821ae_mod_params.fwctrl_lps, bool, 0444);
module_param_named(msi, rtl8821ae_mod_params.msi_support, bool, 0444);
module_param_named(disable_watchdog, rtl8821ae_mod_params.disable_watchdog,
bool, 0444);
+module_param_named(int_clear, rtl8821ae_mod_params.int_clear, bool, 0444);
MODULE_PARM_DESC(swenc, "Set to 1 for software crypto (default 0)\n");
MODULE_PARM_DESC(ips, "Set to 0 to not use link power save (default 1)\n");
MODULE_PARM_DESC(swlps, "Set to 1 to use SW control power save (default 0)\n");
@@ -470,6 +474,7 @@ MODULE_PARM_DESC(fwlps, "Set to 1 to use FW control power save (default 1)\n");
MODULE_PARM_DESC(msi, "Set to 1 to use MSI interrupts mode (default 1)\n");
MODULE_PARM_DESC(debug, "Set debug level (0-5) (default 0)");
MODULE_PARM_DESC(disable_watchdog, "Set to 1 to disable the watchdog (default 0)\n");
+MODULE_PARM_DESC(int_clear, "Set to 1 to disable interrupt clear before set (default 0)\n");
static SIMPLE_DEV_PM_OPS(rtlwifi_pm_ops, rtl_pci_suspend, rtl_pci_resume);
diff --git a/drivers/net/wireless/rtlwifi/wifi.h b/drivers/net/wireless/rtlwifi/wifi.h
index 27822fe34d9a..318078645e64 100644
--- a/drivers/net/wireless/rtlwifi/wifi.h
+++ b/drivers/net/wireless/rtlwifi/wifi.h
@@ -2212,6 +2212,9 @@ struct rtl_mod_params {
/* default 0: 1 means disable */
bool disable_watchdog;
+
+ /* default 0: 1 means do not disable interrupts */
+ bool int_clear;
};
struct rtl_hal_usbint_cfg {
--
2.17.1
From: Joonyoung Shim <[email protected]>
[ Upstream commit bc7c36eedb0c7004aa06c2afc3c5385adada8fa3 ]
When a CPU goes offline a potentially pending timer interrupt is not
cleared. When the CPU comes online again then the pending interrupt is
delivered before the per cpu clockevent device is initialized. As a
consequence the tick interrupt handler dereferences a NULL pointer.
[ 51.251378] Unable to handle kernel NULL pointer dereference at virtual address 00000040
[ 51.289348] task: ee942d00 task.stack: ee960000
[ 51.293861] PC is at tick_periodic+0x38/0xb0
[ 51.298102] LR is at tick_handle_periodic+0x1c/0x90
Clear the pending interrupt in the cpu dying path.
Fixes: 56a94f13919c ("clocksource: exynos_mct: Avoid blocking calls in the cpu hotplug notifier")
Reported-by: Seung-Woo Kim <[email protected]>
Signed-off-by: Joonyoung Shim <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Thomas Gleixner <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/clocksource/exynos_mct.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/clocksource/exynos_mct.c b/drivers/clocksource/exynos_mct.c
index c844616028d2..714f9a767b17 100644
--- a/drivers/clocksource/exynos_mct.c
+++ b/drivers/clocksource/exynos_mct.c
@@ -487,6 +487,7 @@ static void exynos4_local_timer_stop(struct clock_event_device *evt)
if (mct_int_type == MCT_INT_SPI) {
if (evt->irq != -1)
disable_irq_nosync(evt->irq);
+ exynos4_mct_write(0x1, mevt->base + MCT_L_INT_CSTAT_OFFSET);
} else {
disable_percpu_irq(mct_irqs[MCT_L0_IRQ]);
}
--
2.17.1
From: Naoya Horiguchi <[email protected]>
[ Upstream commit 3aaa76e125c1dd58c9b599baa8c6021896874c12 ]
Since commit bcc54222309c ("mm: hugetlb: introduce page_huge_active")
each hugetlb page maintains its active flag to avoid a race condition
betwe= en multiple calls of isolate_huge_page(), but current kernel
doesn't set the f= lag on a hugepage allocated by migration because the
proper putback routine isn= 't called. This means that users could
still encounter the race referred to by bcc54222309c in this special
case, so this patch fixes it.
Fixes: bcc54222309c ("mm: hugetlb: introduce page_huge_active")
Signed-off-by: Naoya Horiguchi <[email protected]>
Cc: Michal Hocko <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Hugh Dickins <[email protected]>
Cc: <[email protected]> [4.1.x]
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
mm/migrate.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/mm/migrate.c b/mm/migrate.c
index 4d743bce5a23..57559f9295f9 100644
--- a/mm/migrate.c
+++ b/mm/migrate.c
@@ -1077,7 +1077,7 @@ static int unmap_and_move_huge_page(new_page_t get_new_page,
if (rc != MIGRATEPAGE_SUCCESS && put_new_page)
put_new_page(new_hpage, private);
else
- put_page(new_hpage);
+ putback_active_hugepage(new_hpage);
if (result) {
if (rc)
--
2.17.1
From: Larry Finger <[email protected]>
[ Upstream commit eeec5d0ef7ee54a75e09e861c3cc44177b8752c7 ]
In commit 54328e64047a5 ("rtlwifi: rtl8821ae: Fix system lockups on boot"),
an attempt was made to fix a regression introduced in commit 1277fa2ab2f9
("rtlwifi: Remove the clear interrupt routine from all drivers").
Unfortunately, there were logic errors in that patch that prevented
affected boxes from booting even after that patch was applied.
The actual cause of the original problem is unknown as none of the
developers have systems that are affected.
Fixes: 54328e64047a ("rtlwifi: rtl8821ae: Fix system lockups on boot")
Signed-off-by: Larry Finger <[email protected]>
Cc: Stable <[email protected]> [V4.1+]
Signed-off-by: Kalle Valo <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/rtlwifi/rtl8821ae/hw.c | 2 +-
drivers/net/wireless/rtlwifi/rtl8821ae/sw.c | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/net/wireless/rtlwifi/rtl8821ae/hw.c b/drivers/net/wireless/rtlwifi/rtl8821ae/hw.c
index 28b8b6a25f6d..3639398f3c71 100644
--- a/drivers/net/wireless/rtlwifi/rtl8821ae/hw.c
+++ b/drivers/net/wireless/rtlwifi/rtl8821ae/hw.c
@@ -2272,7 +2272,7 @@ void rtl8821ae_enable_interrupt(struct ieee80211_hw *hw)
struct rtl_priv *rtlpriv = rtl_priv(hw);
struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
- if (!rtlpci->int_clear)
+ if (rtlpci->int_clear)
rtl8821ae_clear_interrupt(hw);/*clear it here first*/
rtl_write_dword(rtlpriv, REG_HIMR, rtlpci->irq_mask[0] & 0xFFFFFFFF);
diff --git a/drivers/net/wireless/rtlwifi/rtl8821ae/sw.c b/drivers/net/wireless/rtlwifi/rtl8821ae/sw.c
index 80307d187c0a..71cf8120a95e 100644
--- a/drivers/net/wireless/rtlwifi/rtl8821ae/sw.c
+++ b/drivers/net/wireless/rtlwifi/rtl8821ae/sw.c
@@ -474,7 +474,7 @@ MODULE_PARM_DESC(fwlps, "Set to 1 to use FW control power save (default 1)\n");
MODULE_PARM_DESC(msi, "Set to 1 to use MSI interrupts mode (default 1)\n");
MODULE_PARM_DESC(debug, "Set debug level (0-5) (default 0)");
MODULE_PARM_DESC(disable_watchdog, "Set to 1 to disable the watchdog (default 0)\n");
-MODULE_PARM_DESC(int_clear, "Set to 1 to disable interrupt clear before set (default 0)\n");
+MODULE_PARM_DESC(int_clear, "Set to 0 to disable interrupt clear before set (default 1)\n");
static SIMPLE_DEV_PM_OPS(rtlwifi_pm_ops, rtl_pci_suspend, rtl_pci_resume);
--
2.17.1
From: Chris Mi <[email protected]>
[ Upstream commit 7f071998474a9e5f7b98103d3058a1b8ca5887e6 ]
# ./tdc_batch.py -h
usage: tdc_batch.py [-h] [-n NUMBER] [-o] [-s] [-p] device file
TC batch file generator
positional arguments:
device device name
file batch file name
optional arguments:
-h, --help show this help message and exit
-n NUMBER, --number NUMBER
how many lines in batch file
-o, --skip_sw skip_sw (offload), by default skip_hw
-s, --share_action all filters share the same action
-p, --prio all filters have different prio
Acked-by: Jamal Hadi Salim <[email protected]>
Acked-by: Lucas Bates <[email protected]>
Signed-off-by: Chris Mi <[email protected]>
Signed-off-by: Cong Wang <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
.../testing/selftests/tc-testing/tdc_batch.py | 62 +++++++++++++++++++
1 file changed, 62 insertions(+)
create mode 100755 tools/testing/selftests/tc-testing/tdc_batch.py
diff --git a/tools/testing/selftests/tc-testing/tdc_batch.py b/tools/testing/selftests/tc-testing/tdc_batch.py
new file mode 100755
index 000000000000..707c6bfef689
--- /dev/null
+++ b/tools/testing/selftests/tc-testing/tdc_batch.py
@@ -0,0 +1,62 @@
+#!/usr/bin/python3
+
+"""
+tdc_batch.py - a script to generate TC batch file
+
+Copyright (C) 2017 Chris Mi <[email protected]>
+"""
+
+import argparse
+
+parser = argparse.ArgumentParser(description='TC batch file generator')
+parser.add_argument("device", help="device name")
+parser.add_argument("file", help="batch file name")
+parser.add_argument("-n", "--number", type=int,
+ help="how many lines in batch file")
+parser.add_argument("-o", "--skip_sw",
+ help="skip_sw (offload), by default skip_hw",
+ action="store_true")
+parser.add_argument("-s", "--share_action",
+ help="all filters share the same action",
+ action="store_true")
+parser.add_argument("-p", "--prio",
+ help="all filters have different prio",
+ action="store_true")
+args = parser.parse_args()
+
+device = args.device
+file = open(args.file, 'w')
+
+number = 1
+if args.number:
+ number = args.number
+
+skip = "skip_hw"
+if args.skip_sw:
+ skip = "skip_sw"
+
+share_action = ""
+if args.share_action:
+ share_action = "index 1"
+
+prio = "prio 1"
+if args.prio:
+ prio = ""
+ if number > 0x4000:
+ number = 0x4000
+
+index = 0
+for i in range(0x100):
+ for j in range(0x100):
+ for k in range(0x100):
+ mac = ("%02x:%02x:%02x" % (i, j, k))
+ src_mac = "e4:11:00:" + mac
+ dst_mac = "e4:12:00:" + mac
+ cmd = ("filter add dev %s %s protocol ip parent ffff: flower %s "
+ "src_mac %s dst_mac %s action drop %s" %
+ (device, prio, skip, src_mac, dst_mac, share_action))
+ file.write("%s\n" % cmd)
+ index += 1
+ if index >= number:
+ file.close()
+ exit(0)
--
2.17.1
From: Jan Beulich <[email protected]>
[ Upstream commit f454b478861325f067fd58ba7ee9f1b5c4a9d6a0 ]
While the following commit:
37868fe113 ("x86/ldt: Make modify_ldt synchronous")
added a nice comment explaining that Xen needs page-aligned
whole page chunks for guest descriptor tables, it then
nevertheless used kzalloc() on the small size path.
As I'm unaware of guarantees for kmalloc(PAGE_SIZE, ) to return
page-aligned memory blocks, I believe this needs to be switched
back to __get_free_page() (or better get_zeroed_page()).
Signed-off-by: Jan Beulich <[email protected]>
Cc: Andy Lutomirski <[email protected]>
Cc: Andy Lutomirski <[email protected]>
Cc: Boris Ostrovsky <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: Brian Gerst <[email protected]>
Cc: David Vrabel <[email protected]>
Cc: Denys Vlasenko <[email protected]>
Cc: H. Peter Anvin <[email protected]>
Cc: Konrad Rzeszutek Wilk <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Ingo Molnar <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/x86/kernel/ldt.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/x86/kernel/ldt.c b/arch/x86/kernel/ldt.c
index 2bcc0525f1c1..6acc9dd91f36 100644
--- a/arch/x86/kernel/ldt.c
+++ b/arch/x86/kernel/ldt.c
@@ -58,7 +58,7 @@ static struct ldt_struct *alloc_ldt_struct(int size)
if (alloc_size > PAGE_SIZE)
new_ldt->entries = vzalloc(alloc_size);
else
- new_ldt->entries = kzalloc(PAGE_SIZE, GFP_KERNEL);
+ new_ldt->entries = (void *)get_zeroed_page(GFP_KERNEL);
if (!new_ldt->entries) {
kfree(new_ldt);
@@ -95,7 +95,7 @@ static void free_ldt_struct(struct ldt_struct *ldt)
if (ldt->size * LDT_ENTRY_SIZE > PAGE_SIZE)
vfree(ldt->entries);
else
- kfree(ldt->entries);
+ free_page((unsigned long)ldt->entries);
kfree(ldt);
}
--
2.17.1
From: Daniel Borkmann <[email protected]>
[ Upstream commit 7829fb09a2b4268b30dd9bc782fa5ebee278b137 ]
In commit 0b053c951829 ("lib: memzero_explicit: use barrier instead
of OPTIMIZER_HIDE_VAR"), we made memzero_explicit() more robust in
case LTO would decide to inline memzero_explicit() and eventually
find out it could be elimiated as dead store.
While using barrier() works well for the case of gcc, recent efforts
from LLVMLinux people suggest to use llvm as an alternative to gcc,
and there, Stephan found in a simple stand-alone user space example
that llvm could nevertheless optimize and thus elimitate the memset().
A similar issue has been observed in the referenced llvm bug report,
which is regarded as not-a-bug.
Based on some experiments, icc is a bit special on its own, while it
doesn't seem to eliminate the memset(), it could do so with an own
implementation, and then result in similar findings as with llvm.
The fix in this patch now works for all three compilers (also tested
with more aggressive optimization levels). Arguably, in the current
kernel tree it's more of a theoretical issue, but imho, it's better
to be pedantic about it.
It's clearly visible with gcc/llvm though, with the below code: if we
would have used barrier() only here, llvm would have omitted clearing,
not so with barrier_data() variant:
static inline void memzero_explicit(void *s, size_t count)
{
memset(s, 0, count);
barrier_data(s);
}
int main(void)
{
char buff[20];
memzero_explicit(buff, sizeof(buff));
return 0;
}
$ gcc -O2 test.c
$ gdb a.out
(gdb) disassemble main
Dump of assembler code for function main:
0x0000000000400400 <+0>: lea -0x28(%rsp),%rax
0x0000000000400405 <+5>: movq $0x0,-0x28(%rsp)
0x000000000040040e <+14>: movq $0x0,-0x20(%rsp)
0x0000000000400417 <+23>: movl $0x0,-0x18(%rsp)
0x000000000040041f <+31>: xor %eax,%eax
0x0000000000400421 <+33>: retq
End of assembler dump.
$ clang -O2 test.c
$ gdb a.out
(gdb) disassemble main
Dump of assembler code for function main:
0x00000000004004f0 <+0>: xorps %xmm0,%xmm0
0x00000000004004f3 <+3>: movaps %xmm0,-0x18(%rsp)
0x00000000004004f8 <+8>: movl $0x0,-0x8(%rsp)
0x0000000000400500 <+16>: lea -0x18(%rsp),%rax
0x0000000000400505 <+21>: xor %eax,%eax
0x0000000000400507 <+23>: retq
End of assembler dump.
As gcc, clang, but also icc defines __GNUC__, it's sufficient to define
this in compiler-gcc.h only to be picked up. For a fallback or otherwise
unsupported compiler, we define it as a barrier. Similarly, for ecc which
does not support gcc inline asm.
Reference: https://llvm.org/bugs/show_bug.cgi?id=15495
Reported-by: Stephan Mueller <[email protected]>
Tested-by: Stephan Mueller <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Cc: Theodore Ts'o <[email protected]>
Cc: Stephan Mueller <[email protected]>
Cc: Hannes Frederic Sowa <[email protected]>
Cc: mancha security <[email protected]>
Cc: Mark Charlebois <[email protected]>
Cc: Behan Webster <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
include/linux/compiler-gcc.h | 16 +++++++++++++++-
include/linux/compiler-intel.h | 3 +++
include/linux/compiler.h | 4 ++++
lib/string.c | 2 +-
4 files changed, 23 insertions(+), 2 deletions(-)
diff --git a/include/linux/compiler-gcc.h b/include/linux/compiler-gcc.h
index 633716ef19b0..4d9e673bd76c 100644
--- a/include/linux/compiler-gcc.h
+++ b/include/linux/compiler-gcc.h
@@ -9,10 +9,24 @@
+ __GNUC_MINOR__ * 100 \
+ __GNUC_PATCHLEVEL__)
-
/* Optimization barrier */
+
/* The "volatile" is due to gcc bugs */
#define barrier() __asm__ __volatile__("": : :"memory")
+/*
+ * This version is i.e. to prevent dead stores elimination on @ptr
+ * where gcc and llvm may behave differently when otherwise using
+ * normal barrier(): while gcc behavior gets along with a normal
+ * barrier(), llvm needs an explicit input variable to be assumed
+ * clobbered. The issue is as follows: while the inline asm might
+ * access any memory it wants, the compiler could have fit all of
+ * @ptr into memory registers instead, and since @ptr never escaped
+ * from that, it proofed that the inline asm wasn't touching any of
+ * it. This version works well with both compilers, i.e. we're telling
+ * the compiler that the inline asm absolutely may see the contents
+ * of @ptr. See also: https://llvm.org/bugs/show_bug.cgi?id=15495
+ */
+#define barrier_data(ptr) __asm__ __volatile__("": :"r"(ptr) :"memory")
/*
* This macro obfuscates arithmetic on a variable address so that gcc
diff --git a/include/linux/compiler-intel.h b/include/linux/compiler-intel.h
index ba147a1727e6..0c9a2f2c2802 100644
--- a/include/linux/compiler-intel.h
+++ b/include/linux/compiler-intel.h
@@ -13,9 +13,12 @@
/* Intel ECC compiler doesn't support gcc specific asm stmts.
* It uses intrinsics to do the equivalent things.
*/
+#undef barrier_data
#undef RELOC_HIDE
#undef OPTIMIZER_HIDE_VAR
+#define barrier_data(ptr) barrier()
+
#define RELOC_HIDE(ptr, off) \
({ unsigned long __ptr; \
__ptr = (unsigned long) (ptr); \
diff --git a/include/linux/compiler.h b/include/linux/compiler.h
index 8cf7a33e1b72..78b27883744c 100644
--- a/include/linux/compiler.h
+++ b/include/linux/compiler.h
@@ -165,6 +165,10 @@ void ftrace_likely_update(struct ftrace_branch_data *f, int val, int expect);
# define barrier() __memory_barrier()
#endif
+#ifndef barrier_data
+# define barrier_data(ptr) barrier()
+#endif
+
/* Unreachable code */
#ifndef unreachable
# define unreachable() do { } while (1)
diff --git a/lib/string.c b/lib/string.c
index 8e8a2e9e9522..de4bf3778958 100644
--- a/lib/string.c
+++ b/lib/string.c
@@ -699,7 +699,7 @@ EXPORT_SYMBOL(memset);
void memzero_explicit(void *s, size_t count)
{
memset(s, 0, count);
- barrier();
+ barrier_data(s);
}
EXPORT_SYMBOL(memzero_explicit);
--
2.17.1
From: Sylwester Nawrocki <[email protected]>
[ Upstream commit a96d3b7593a3eefab62dd930e5c99201c3678ee4 ]
Commit b5a099c67a1c36b "net: ethernet: davicom: fix devicetree irq
resource" causes an interrupt storm after the ethernet interface
is activated on S3C24XX platform (ARM non-dt), due to the interrupt
trigger type not being set properly.
It seems, after adding parsing of IRQ flags in commit 7085a7401ba54e92b
"drivers: platform: parse IRQ flags from resources", there is no path
for non-dt platforms where irq_set_type callback could be invoked when
we don't pass the trigger type flags to the request_irq() call.
In case of a board where the regression is seen the interrupt trigger
type flags are passed through a platform device's resource and it is
not currently handled properly without passing the irq trigger type
flags to the request_irq() call. In case of OF an of_irq_get() call
within platform_get_irq() function seems to be ensuring required irq_chip
setup, but there is no equivalent code for non OF/ACPI platforms.
This patch mostly restores irq trigger type setting code which has been
removed in commit ("net: ethernet: davicom: fix devicetree irq resource").
Fixes: b5a099c67a1c36b913 ("net: ethernet: davicom: fix devicetree irq resource")
Signed-off-by: Sylwester Nawrocki <[email protected]>
Acked-by: Robert Jarzmik <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/davicom/dm9000.c | 8 +++++---
1 file changed, 5 insertions(+), 3 deletions(-)
diff --git a/drivers/net/ethernet/davicom/dm9000.c b/drivers/net/ethernet/davicom/dm9000.c
index ef24b60b4d3f..d2e0a10a8511 100644
--- a/drivers/net/ethernet/davicom/dm9000.c
+++ b/drivers/net/ethernet/davicom/dm9000.c
@@ -1296,6 +1296,7 @@ static int
dm9000_open(struct net_device *dev)
{
struct board_info *db = netdev_priv(dev);
+ unsigned int irq_flags = irq_get_trigger_type(dev->irq);
if (netif_msg_ifup(db))
dev_dbg(db->dev, "enabling %s\n", dev->name);
@@ -1303,9 +1304,11 @@ dm9000_open(struct net_device *dev)
/* If there is no IRQ type specified, tell the user that this is a
* problem
*/
- if (irq_get_trigger_type(dev->irq) == IRQF_TRIGGER_NONE)
+ if (irq_flags == IRQF_TRIGGER_NONE)
dev_warn(db->dev, "WARNING: no IRQ resource flags set.\n");
+ irq_flags |= IRQF_SHARED;
+
/* GPIO0 on pre-activate PHY, Reg 1F is not set by reset */
iow(db, DM9000_GPR, 0); /* REG_1F bit0 activate phyxcer */
mdelay(1); /* delay needs by DM9000B */
@@ -1313,8 +1316,7 @@ dm9000_open(struct net_device *dev)
/* Initialize DM9000 board */
dm9000_init_dm9000(dev);
- if (request_irq(dev->irq, dm9000_interrupt, IRQF_SHARED,
- dev->name, dev))
+ if (request_irq(dev->irq, dm9000_interrupt, irq_flags, dev->name, dev))
return -EAGAIN;
/* Now that we have an interrupt handler hooked up we can unmask
* our interrupts
--
2.17.1
From: Robert Jarzmik <[email protected]>
[ Upstream commit b5a099c67a1c36b91356624ce86eb3f9f48a82c7 ]
The dm9000 driver doesn't work in at least one device-tree
configuration, spitting an error message on irq resource :
[ 1.062495] dm9000 8000000.ethernet: insufficient resources
[ 1.068439] dm9000 8000000.ethernet: not found (-2).
[ 1.073451] dm9000: probe of 8000000.ethernet failed with error -2
The reason behind is that the interrupt might be provided by a gpio
controller, not probed when dm9000 is probed, and needing the probe
deferral mechanism to apply.
Currently, the interrupt is directly taken from resources. This patch
changes this to use the more generic platform_get_irq(), which handles
the deferral.
Moreover, since commit Fixes: 7085a7401ba5 ("drivers: platform: parse
IRQ flags from resources"), the interrupt trigger flags are honored in
platform_get_irq(), so remove the needless code in dm9000.
Signed-off-by: Robert Jarzmik <[email protected]>
Acked-by: Marcel Ziswiler <[email protected]>
Cc: Sergei Shtylyov <[email protected]>
Tested-by: Sergei Ianovich <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/davicom/dm9000.c | 34 +++++++++++++--------------
1 file changed, 17 insertions(+), 17 deletions(-)
diff --git a/drivers/net/ethernet/davicom/dm9000.c b/drivers/net/ethernet/davicom/dm9000.c
index f3ba840cbf7b..ef24b60b4d3f 100644
--- a/drivers/net/ethernet/davicom/dm9000.c
+++ b/drivers/net/ethernet/davicom/dm9000.c
@@ -125,7 +125,6 @@ struct board_info {
struct resource *data_res;
struct resource *addr_req; /* resources requested */
struct resource *data_req;
- struct resource *irq_res;
int irq_wake;
@@ -1297,22 +1296,16 @@ static int
dm9000_open(struct net_device *dev)
{
struct board_info *db = netdev_priv(dev);
- unsigned long irqflags = db->irq_res->flags & IRQF_TRIGGER_MASK;
if (netif_msg_ifup(db))
dev_dbg(db->dev, "enabling %s\n", dev->name);
- /* If there is no IRQ type specified, default to something that
- * may work, and tell the user that this is a problem */
-
- if (irqflags == IRQF_TRIGGER_NONE)
- irqflags = irq_get_trigger_type(dev->irq);
-
- if (irqflags == IRQF_TRIGGER_NONE)
+ /* If there is no IRQ type specified, tell the user that this is a
+ * problem
+ */
+ if (irq_get_trigger_type(dev->irq) == IRQF_TRIGGER_NONE)
dev_warn(db->dev, "WARNING: no IRQ resource flags set.\n");
- irqflags |= IRQF_SHARED;
-
/* GPIO0 on pre-activate PHY, Reg 1F is not set by reset */
iow(db, DM9000_GPR, 0); /* REG_1F bit0 activate phyxcer */
mdelay(1); /* delay needs by DM9000B */
@@ -1320,7 +1313,8 @@ dm9000_open(struct net_device *dev)
/* Initialize DM9000 board */
dm9000_init_dm9000(dev);
- if (request_irq(dev->irq, dm9000_interrupt, irqflags, dev->name, dev))
+ if (request_irq(dev->irq, dm9000_interrupt, IRQF_SHARED,
+ dev->name, dev))
return -EAGAIN;
/* Now that we have an interrupt handler hooked up we can unmask
* our interrupts
@@ -1460,15 +1454,22 @@ dm9000_probe(struct platform_device *pdev)
db->addr_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
db->data_res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
- db->irq_res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
- if (db->addr_res == NULL || db->data_res == NULL ||
- db->irq_res == NULL) {
- dev_err(db->dev, "insufficient resources\n");
+ if (!db->addr_res || !db->data_res) {
+ dev_err(db->dev, "insufficient resources addr=%p data=%p\n",
+ db->addr_res, db->data_res);
ret = -ENOENT;
goto out;
}
+ ndev->irq = platform_get_irq(pdev, 0);
+ if (ndev->irq < 0) {
+ dev_err(db->dev, "interrupt resource unavailable: %d\n",
+ ndev->irq);
+ ret = ndev->irq;
+ goto out;
+ }
+
db->irq_wake = platform_get_irq(pdev, 1);
if (db->irq_wake >= 0) {
dev_dbg(db->dev, "wakeup irq %d\n", db->irq_wake);
@@ -1530,7 +1531,6 @@ dm9000_probe(struct platform_device *pdev)
/* fill in parameters for net-dev structure */
ndev->base_addr = (unsigned long)db->io_addr;
- ndev->irq = db->irq_res->start;
/* ensure at least we have a default set of IO routines */
dm9000_set_io(db, iosize);
--
2.17.1
From: Theodore Ts'o <[email protected]>
[ Upstream commit b9576fc3624eb9fc88bec0d0ae883fd78be86239 ]
The xfstests test suite assumes that an attempt to collapse range on
the range (0, 1) will return EOPNOTSUPP if the file system does not
support collapse range. Commit 280227a75b56: "ext4: move check under
lock scope to close a race" broke this, and this caused xfstests to
fail when run when testing file systems that did not have the extents
feature enabled.
Reported-by: Eric Whitney <[email protected]>
Signed-off-by: Theodore Ts'o <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/ext4/extents.c | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/fs/ext4/extents.c b/fs/ext4/extents.c
index 6dbfa92bf78a..1e51008e237f 100644
--- a/fs/ext4/extents.c
+++ b/fs/ext4/extents.c
@@ -5400,6 +5400,14 @@ int ext4_collapse_range(struct inode *inode, loff_t offset, loff_t len)
loff_t new_size, ioffset;
int ret;
+ /*
+ * We need to test this early because xfstests assumes that a
+ * collapse range of (0, 1) will return EOPNOTSUPP if the file
+ * system does not support collapse range.
+ */
+ if (!ext4_test_inode_flag(inode, EXT4_INODE_EXTENTS))
+ return -EOPNOTSUPP;
+
/* Collapse range works only on fs block size aligned offsets. */
if (offset & (EXT4_CLUSTER_SIZE(sb) - 1) ||
len & (EXT4_CLUSTER_SIZE(sb) - 1))
--
2.17.1
From: Brian Norris <[email protected]>
[ Upstream commit f3c63795e90f0c6238306883b6c72f14d5355721 ]
Commit 073db4a51ee4 ("mtd: fix: avoid race condition when accessing
mtd->usecount") fixed a race condition but due to poor ordering of the
mutex acquisition, introduced a potential deadlock.
The deadlock can occur, for example, when rmmod'ing the m25p80 module, which
will delete one or more MTDs, along with any corresponding mtdblock
devices. This could potentially race with an acquisition of the block
device as follows.
-> blktrans_open()
-> mutex_lock(&dev->lock);
-> mutex_lock(&mtd_table_mutex);
-> del_mtd_device()
-> mutex_lock(&mtd_table_mutex);
-> blktrans_notify_remove() -> del_mtd_blktrans_dev()
-> mutex_lock(&dev->lock);
This is a classic (potential) ABBA deadlock, which can be fixed by
making the A->B ordering consistent everywhere. There was no real
purpose to the ordering in the original patch, AFAIR, so this shouldn't
be a problem. This ordering was actually already present in
del_mtd_blktrans_dev(), for one, where the function tried to ensure that
its caller already held mtd_table_mutex before it acquired &dev->lock:
if (mutex_trylock(&mtd_table_mutex)) {
mutex_unlock(&mtd_table_mutex);
BUG();
}
So, reverse the ordering of acquisition of &dev->lock and &mtd_table_mutex so
we always acquire mtd_table_mutex first.
Snippets of the lockdep output follow:
# modprobe -r m25p80
[ 53.419251]
[ 53.420838] ======================================================
[ 53.427300] [ INFO: possible circular locking dependency detected ]
[ 53.433865] 4.3.0-rc6 #96 Not tainted
[ 53.437686] -------------------------------------------------------
[ 53.444220] modprobe/372 is trying to acquire lock:
[ 53.449320] (&new->lock){+.+...}, at: [<c043fe4c>] del_mtd_blktrans_dev+0x80/0xdc
[ 53.457271]
[ 53.457271] but task is already holding lock:
[ 53.463372] (mtd_table_mutex){+.+.+.}, at: [<c0439994>] del_mtd_device+0x18/0x100
[ 53.471321]
[ 53.471321] which lock already depends on the new lock.
[ 53.471321]
[ 53.479856]
[ 53.479856] the existing dependency chain (in reverse order) is:
[ 53.487660]
-> #1 (mtd_table_mutex){+.+.+.}:
[ 53.492331] [<c043fc5c>] blktrans_open+0x34/0x1a4
[ 53.497879] [<c01afce0>] __blkdev_get+0xc4/0x3b0
[ 53.503364] [<c01b0bb8>] blkdev_get+0x108/0x320
[ 53.508743] [<c01713c0>] do_dentry_open+0x218/0x314
[ 53.514496] [<c0180454>] path_openat+0x4c0/0xf9c
[ 53.519959] [<c0182044>] do_filp_open+0x5c/0xc0
[ 53.525336] [<c0172758>] do_sys_open+0xfc/0x1cc
[ 53.530716] [<c000f740>] ret_fast_syscall+0x0/0x1c
[ 53.536375]
-> #0 (&new->lock){+.+...}:
[ 53.540587] [<c063f124>] mutex_lock_nested+0x38/0x3cc
[ 53.546504] [<c043fe4c>] del_mtd_blktrans_dev+0x80/0xdc
[ 53.552606] [<c043f164>] blktrans_notify_remove+0x7c/0x84
[ 53.558891] [<c04399f0>] del_mtd_device+0x74/0x100
[ 53.564544] [<c043c670>] del_mtd_partitions+0x80/0xc8
[ 53.570451] [<c0439aa0>] mtd_device_unregister+0x24/0x48
[ 53.576637] [<c046ce6c>] spi_drv_remove+0x1c/0x34
[ 53.582207] [<c03de0f0>] __device_release_driver+0x88/0x114
[ 53.588663] [<c03de19c>] device_release_driver+0x20/0x2c
[ 53.594843] [<c03dd9e8>] bus_remove_device+0xd8/0x108
[ 53.600748] [<c03dacc0>] device_del+0x10c/0x210
[ 53.606127] [<c03dadd0>] device_unregister+0xc/0x20
[ 53.611849] [<c046d878>] __unregister+0x10/0x20
[ 53.617211] [<c03da868>] device_for_each_child+0x50/0x7c
[ 53.623387] [<c046eae8>] spi_unregister_master+0x58/0x8c
[ 53.629578] [<c03e12f0>] release_nodes+0x15c/0x1c8
[ 53.635223] [<c03de0f8>] __device_release_driver+0x90/0x114
[ 53.641689] [<c03de900>] driver_detach+0xb4/0xb8
[ 53.647147] [<c03ddc78>] bus_remove_driver+0x4c/0xa0
[ 53.652970] [<c00cab50>] SyS_delete_module+0x11c/0x1e4
[ 53.658976] [<c000f740>] ret_fast_syscall+0x0/0x1c
[ 53.664621]
[ 53.664621] other info that might help us debug this:
[ 53.664621]
[ 53.672979] Possible unsafe locking scenario:
[ 53.672979]
[ 53.679169] CPU0 CPU1
[ 53.683900] ---- ----
[ 53.688633] lock(mtd_table_mutex);
[ 53.692383] lock(&new->lock);
[ 53.698306] lock(mtd_table_mutex);
[ 53.704658] lock(&new->lock);
[ 53.707946]
[ 53.707946] *** DEADLOCK ***
Fixes: 073db4a51ee4 ("mtd: fix: avoid race condition when accessing mtd->usecount")
Reported-by: Felipe Balbi <[email protected]>
Tested-by: Felipe Balbi <[email protected]>
Signed-off-by: Brian Norris <[email protected]>
Cc: <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/mtd/mtd_blkdevs.c | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/drivers/mtd/mtd_blkdevs.c b/drivers/mtd/mtd_blkdevs.c
index 3e3aa17ee3bd..6368300f3fbe 100644
--- a/drivers/mtd/mtd_blkdevs.c
+++ b/drivers/mtd/mtd_blkdevs.c
@@ -195,8 +195,8 @@ static int blktrans_open(struct block_device *bdev, fmode_t mode)
if (!dev)
return -ERESTARTSYS; /* FIXME: busy loop! -arnd*/
- mutex_lock(&dev->lock);
mutex_lock(&mtd_table_mutex);
+ mutex_lock(&dev->lock);
if (dev->open)
goto unlock;
@@ -220,8 +220,8 @@ static int blktrans_open(struct block_device *bdev, fmode_t mode)
unlock:
dev->open++;
- mutex_unlock(&mtd_table_mutex);
mutex_unlock(&dev->lock);
+ mutex_unlock(&mtd_table_mutex);
blktrans_dev_put(dev);
return ret;
@@ -231,8 +231,8 @@ static int blktrans_open(struct block_device *bdev, fmode_t mode)
error_put:
module_put(dev->tr->owner);
kref_put(&dev->ref, blktrans_dev_release);
- mutex_unlock(&mtd_table_mutex);
mutex_unlock(&dev->lock);
+ mutex_unlock(&mtd_table_mutex);
blktrans_dev_put(dev);
return ret;
}
@@ -244,8 +244,8 @@ static void blktrans_release(struct gendisk *disk, fmode_t mode)
if (!dev)
return;
- mutex_lock(&dev->lock);
mutex_lock(&mtd_table_mutex);
+ mutex_lock(&dev->lock);
if (--dev->open)
goto unlock;
@@ -259,8 +259,8 @@ static void blktrans_release(struct gendisk *disk, fmode_t mode)
__put_mtd_device(dev->mtd);
}
unlock:
- mutex_unlock(&mtd_table_mutex);
mutex_unlock(&dev->lock);
+ mutex_unlock(&mtd_table_mutex);
blktrans_dev_put(dev);
}
--
2.17.1
From: Eugenia Emantayev <[email protected]>
[ Upstream commit fc9f5ea9b4ecbe9b7839c92f0a54261809c723d3 ]
Service task is responsible for other tasks in addition to timestamping
overflow check. Launch it even if timestamping is not supported by device.
Fixes: 07841f9d94c1 ('net/mlx4_en: Schedule napi when RX buffers allocation fails')
Signed-off-by: Eugenia Emantayev <[email protected]>
Signed-off-by: Eran Ben Elisha <[email protected]>
Signed-off-by: Or Gerlitz <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/mellanox/mlx4/en_netdev.c | 5 ++---
1 file changed, 2 insertions(+), 3 deletions(-)
diff --git a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c
index f31814293d3c..980dd359e3f7 100644
--- a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c
+++ b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c
@@ -2638,9 +2638,8 @@ int mlx4_en_init_netdev(struct mlx4_en_dev *mdev, int port,
}
queue_delayed_work(mdev->workqueue, &priv->stats_task, STATS_DELAY);
- if (mdev->dev->caps.flags2 & MLX4_DEV_CAP_FLAG2_TS)
- queue_delayed_work(mdev->workqueue, &priv->service_task,
- SERVICE_TASK_DELAY);
+ queue_delayed_work(mdev->workqueue, &priv->service_task,
+ SERVICE_TASK_DELAY);
err = register_netdev(dev);
if (err) {
--
2.17.1
From: Junichi Nomura <[email protected]>
[ Upstream commit 2a708cff93f1845b9239bc7d6310aef54e716c6a ]
__dm_destroy() takes io_barrier SRCU lock (dm_get_live_table) and
suspend_lock in reverse order. Doing so can cause AB-BA deadlock:
__dm_destroy dm_swap_table
---------------------------------------------------
mutex_lock(suspend_lock)
dm_get_live_table()
srcu_read_lock(io_barrier)
dm_sync_table()
synchronize_srcu(io_barrier)
.. waiting for dm_put_live_table()
mutex_lock(suspend_lock)
.. waiting for suspend_lock
Fix this by taking the locks in proper order.
Signed-off-by: Jun'ichi Nomura <[email protected]>
Fixes: ab7c7bb6f4ab ("dm: hold suspend_lock while suspending device during device deletion")
Acked-by: Mikulas Patocka <[email protected]>
Signed-off-by: Mike Snitzer <[email protected]>
Cc: [email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/md/dm.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/md/dm.c b/drivers/md/dm.c
index 1d08dc6fa0b5..00c86ff3c721 100644
--- a/drivers/md/dm.c
+++ b/drivers/md/dm.c
@@ -2599,14 +2599,14 @@ static void __dm_destroy(struct mapped_device *md, bool wait)
* do not race with internal suspend.
*/
mutex_lock(&md->suspend_lock);
+ map = dm_get_live_table(md, &srcu_idx);
if (!dm_suspended_md(md)) {
dm_table_presuspend_targets(map);
dm_table_postsuspend_targets(map);
}
- mutex_unlock(&md->suspend_lock);
-
/* dm_put_live_table must be before msleep, otherwise deadlock is possible */
dm_put_live_table(md, srcu_idx);
+ mutex_unlock(&md->suspend_lock);
/*
* Rare, but there may be I/O requests still going to complete,
--
2.17.1
From: Stefan Agner <[email protected]>
[ Upstream commit d68827c62a105eec547945daedf4d1d3e283717d ]
Commit 8e4934c6d6c6 ("tty: serial: fsl_lpuart: clear receive flag on FIFO
flush") implemented clearing of the receive flag by reading the status register
only. It turned out that even though we flush the FIFO afterwards, a explicit
read of the data register is still required.
This leads to a FIFO underrun. To avoid this, follow the advice in the overrun
"Operation section": Unconditionally clear RXUF after using RXFLUSH.
Signed-off-by: Stefan Agner <[email protected]>
Signed-off-by: Bhuvanchandra DV <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/tty/serial/fsl_lpuart.c | 9 ++++++---
1 file changed, 6 insertions(+), 3 deletions(-)
diff --git a/drivers/tty/serial/fsl_lpuart.c b/drivers/tty/serial/fsl_lpuart.c
index af3047d8322a..92b7a5bf7c4d 100644
--- a/drivers/tty/serial/fsl_lpuart.c
+++ b/drivers/tty/serial/fsl_lpuart.c
@@ -910,13 +910,16 @@ static void lpuart_setup_watermark(struct lpuart_port *sport)
writeb(val | UARTPFIFO_TXFE | UARTPFIFO_RXFE,
sport->port.membase + UARTPFIFO);
- /* explicitly clear RDRF */
- readb(sport->port.membase + UARTSR1);
-
/* flush Tx and Rx FIFO */
writeb(UARTCFIFO_TXFLUSH | UARTCFIFO_RXFLUSH,
sport->port.membase + UARTCFIFO);
+ /* explicitly clear RDRF */
+ if (readb(sport->port.membase + UARTSR1) & UARTSR1_RDRF) {
+ readb(sport->port.membase + UARTDR);
+ writeb(UARTSFIFO_RXUF, sport->port.membase + UARTSFIFO);
+ }
+
writeb(0, sport->port.membase + UARTTWFIFO);
writeb(1, sport->port.membase + UARTRWFIFO);
--
2.17.1
From: Alex Williamson <[email protected]>
[ Upstream commit 46ebb7af7b93792de65e124e1ab8b89a108a41f2 ]
This continues the attempt to fix commit fb170fb4c548 ("iommu/vt-d:
Introduce helper functions to make code symmetric for readability").
The previous attempt in commit 71684406905f ("iommu/vt-d: Detach
domain *only* from attached iommus") overlooked the fact that
dmar_domain.iommu_bmp gets cleared for VM domains when devices are
detached:
intel_iommu_detach_device
domain_remove_one_dev_info
domain_detach_iommu
The domain is detached from the iommu, but the iommu is still attached
to the domain, for whatever reason. Thus when we get to domain_exit(),
we can't rely on iommu_bmp for VM domains to find the active iommus,
we must check them all. Without that, the corresponding bit in
intel_iommu.domain_ids doesn't get cleared and repeated VM domain
creation and destruction will run out of domain IDs. Meanwhile we
still can't call iommu_detach_domain() on arbitrary non-VM domains or
we risk clearing in-use domain IDs, as 71684406905f attempted to
address.
It's tempting to modify iommu_detach_domain() to test the domain
iommu_bmp, but the call ordering from domain_remove_one_dev_info()
prevents it being able to work as fb170fb4c548 seems to have intended.
Caching of unused VM domains on the iommu object seems to be the root
of the problem, but this code is far too fragile for that kind of
rework to be proposed for stable, so we simply revert this chunk to
its state prior to fb170fb4c548.
Fixes: fb170fb4c548 ("iommu/vt-d: Introduce helper functions to make
code symmetric for readability")
Fixes: 71684406905f ("iommu/vt-d: Detach domain *only* from attached
iommus")
Signed-off-by: Alex Williamson <[email protected]>
Cc: Jiang Liu <[email protected]>
Cc: [email protected] # v3.17+
Signed-off-by: Joerg Roedel <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/iommu/intel-iommu.c | 9 ++++++---
1 file changed, 6 insertions(+), 3 deletions(-)
diff --git a/drivers/iommu/intel-iommu.c b/drivers/iommu/intel-iommu.c
index 351da1da814f..2068cb59f7ed 100644
--- a/drivers/iommu/intel-iommu.c
+++ b/drivers/iommu/intel-iommu.c
@@ -1759,8 +1759,9 @@ static int domain_init(struct dmar_domain *domain, int guest_width)
static void domain_exit(struct dmar_domain *domain)
{
+ struct dmar_drhd_unit *drhd;
+ struct intel_iommu *iommu;
struct page *freelist = NULL;
- int i;
/* Domain 0 is reserved, so dont process it */
if (!domain)
@@ -1780,8 +1781,10 @@ static void domain_exit(struct dmar_domain *domain)
/* clear attached or cached domains */
rcu_read_lock();
- for_each_set_bit(i, domain->iommu_bmp, g_num_of_iommus)
- iommu_detach_domain(domain, g_iommus[i]);
+ for_each_active_iommu(iommu, drhd)
+ if (domain_type_is_vm(domain) ||
+ test_bit(iommu->seq_id, domain->iommu_bmp))
+ iommu_detach_domain(domain, iommu);
rcu_read_unlock();
dma_free_pagelist(freelist);
--
2.17.1
From: Filipe Manana <[email protected]>
[ Upstream commit b659ef027792219b590d67a2baf1643a93727d29 ]
Commit 3a8b36f37806 ("Btrfs: fix data loss in the fast fsync path") added
a performance regression for that causes an unnecessary sync of the log
trees (fs/subvol and root log trees) when 2 consecutive fsyncs are done
against a file, without no writes or any metadata updates to the inode in
between them and if a transaction is committed before the second fsync is
called.
Huang Ying reported this to lkml (https://lkml.org/lkml/2015/3/18/99)
after a test sysbench test that measured a -62% decrease of file io
requests per second for that tests' workload.
The test is:
echo performance > /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor
echo performance > /sys/devices/system/cpu/cpu1/cpufreq/scaling_governor
echo performance > /sys/devices/system/cpu/cpu2/cpufreq/scaling_governor
echo performance > /sys/devices/system/cpu/cpu3/cpufreq/scaling_governor
mkfs -t btrfs /dev/sda2
mount -t btrfs /dev/sda2 /fs/sda2
cd /fs/sda2
for ((i = 0; i < 1024; i++)); do fallocate -l 67108864 testfile.$i; done
sysbench --test=fileio --max-requests=0 --num-threads=4 --max-time=600 \
--file-test-mode=rndwr --file-total-size=68719476736 --file-io-mode=sync \
--file-num=1024 run
A test on kvm guest, running a debug kernel gave me the following results:
Without 3a8b36f378060d: 16.01 reqs/sec
With 3a8b36f378060d: 3.39 reqs/sec
With 3a8b36f378060d and this patch: 16.04 reqs/sec
Reported-by: Huang Ying <[email protected]>
Tested-by: Huang, Ying <[email protected]>
Signed-off-by: Filipe Manana <[email protected]>
Signed-off-by: Chris Mason <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/btrfs/file.c | 9 ++++++---
fs/btrfs/ordered-data.c | 14 ++++++++++++++
fs/btrfs/ordered-data.h | 3 +++
3 files changed, 23 insertions(+), 3 deletions(-)
diff --git a/fs/btrfs/file.c b/fs/btrfs/file.c
index 2ad4cb3da8f6..ba37ec6263ca 100644
--- a/fs/btrfs/file.c
+++ b/fs/btrfs/file.c
@@ -1879,6 +1879,7 @@ int btrfs_sync_file(struct file *file, loff_t start, loff_t end, int datasync)
struct btrfs_log_ctx ctx;
int ret = 0;
bool full_sync = 0;
+ const u64 len = end - start + 1;
trace_btrfs_sync_file(file, datasync);
@@ -1907,7 +1908,7 @@ int btrfs_sync_file(struct file *file, loff_t start, loff_t end, int datasync)
* all extents are persisted and the respective file extent
* items are in the fs/subvol btree.
*/
- ret = btrfs_wait_ordered_range(inode, start, end - start + 1);
+ ret = btrfs_wait_ordered_range(inode, start, len);
} else {
/*
* Start any new ordered operations before starting to log the
@@ -1979,8 +1980,10 @@ int btrfs_sync_file(struct file *file, loff_t start, loff_t end, int datasync)
*/
smp_mb();
if (btrfs_inode_in_log(inode, root->fs_info->generation) ||
- (full_sync && BTRFS_I(inode)->last_trans <=
- root->fs_info->last_trans_committed)) {
+ (BTRFS_I(inode)->last_trans <=
+ root->fs_info->last_trans_committed &&
+ (full_sync ||
+ !btrfs_have_ordered_extents_in_range(inode, start, len)))) {
/*
* We'v had everything committed since the last time we were
* modified so clear this flag in case it was set for whatever
diff --git a/fs/btrfs/ordered-data.c b/fs/btrfs/ordered-data.c
index b23d024c0234..4c20199cef62 100644
--- a/fs/btrfs/ordered-data.c
+++ b/fs/btrfs/ordered-data.c
@@ -848,6 +848,20 @@ struct btrfs_ordered_extent *btrfs_lookup_ordered_range(struct inode *inode,
return entry;
}
+bool btrfs_have_ordered_extents_in_range(struct inode *inode,
+ u64 file_offset,
+ u64 len)
+{
+ struct btrfs_ordered_extent *oe;
+
+ oe = btrfs_lookup_ordered_range(inode, file_offset, len);
+ if (oe) {
+ btrfs_put_ordered_extent(oe);
+ return true;
+ }
+ return false;
+}
+
/*
* lookup and return any extent before 'file_offset'. NULL is returned
* if none is found
diff --git a/fs/btrfs/ordered-data.h b/fs/btrfs/ordered-data.h
index 0124bffc775f..a1bce0a5cccc 100644
--- a/fs/btrfs/ordered-data.h
+++ b/fs/btrfs/ordered-data.h
@@ -191,6 +191,9 @@ btrfs_lookup_first_ordered_extent(struct inode * inode, u64 file_offset);
struct btrfs_ordered_extent *btrfs_lookup_ordered_range(struct inode *inode,
u64 file_offset,
u64 len);
+bool btrfs_have_ordered_extents_in_range(struct inode *inode,
+ u64 file_offset,
+ u64 len);
int btrfs_ordered_update_i_size(struct inode *inode, u64 offset,
struct btrfs_ordered_extent *ordered);
int btrfs_find_ordered_sum(struct inode *inode, u64 offset, u64 disk_bytenr,
--
2.17.1
From: Joerg Roedel <[email protected]>
[ Upstream commit d97eb8966c91f2c9d05f0a22eb89ed5b76d966d1 ]
When an interrupt is migrated away from a cpu it will stay
in its vector_irq array until smp_irq_move_cleanup_interrupt
succeeded. The cfg->move_in_progress flag is cleared already
when the IPI was sent.
When the interrupt is destroyed after migration its 'struct
irq_desc' is freed and the vector_irq arrays are cleaned up.
But since cfg->move_in_progress is already 0 the references
at cpus before the last migration will not be cleared. So
this would leave a reference to an already destroyed irq
alive.
When the cpu is taken down at this point, the
check_irq_vectors_for_cpu_disable() function finds a valid irq
number in the vector_irq array, but gets NULL for its
descriptor and dereferences it, causing a kernel panic.
This has been observed on real systems at shutdown. Add a
check to check_irq_vectors_for_cpu_disable() for a valid
'struct irq_desc' to prevent this issue.
Signed-off-by: Joerg Roedel <[email protected]>
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Reviewed-by: Jiang Liu <[email protected]>
Cc: H. Peter Anvin <[email protected]>
Cc: Jan Beulich <[email protected]>
Cc: K. Y. Srinivasan <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Prarit Bhargava <[email protected]>
Cc: Rasmus Villemoes <[email protected]>
Cc: Yinghai Lu <[email protected]>
Cc: [email protected]
Cc: [email protected]
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Ingo Molnar <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/x86/kernel/irq.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/arch/x86/kernel/irq.c b/arch/x86/kernel/irq.c
index 37907756fc41..1d6e2946a3da 100644
--- a/arch/x86/kernel/irq.c
+++ b/arch/x86/kernel/irq.c
@@ -302,6 +302,9 @@ int check_irq_vectors_for_cpu_disable(void)
irq = __this_cpu_read(vector_irq[vector]);
if (irq >= 0) {
desc = irq_to_desc(irq);
+ if (!desc)
+ continue;
+
data = irq_desc_get_irq_data(desc);
cpumask_copy(&affinity_new, data->affinity);
cpu_clear(this_cpu, affinity_new);
--
2.17.1
From: Lars-Peter Clausen <[email protected]>
[ Upstream commit a798c24a69b64f09e2d323ac8155a36373e5d5fd ]
Commit fdb6eb0a1287 ("ASoC: dapm: Modify widget stream name according to
prefix") fixed the case where a DAPM route between a DAI widget and a
DAC/ADC/AIF widget with a matching stream name was not created when the
DAPM context was using a prefix.
Unfortunately the patch introduced a few issues on its own like leaking the
dynamically allocated stream name memory and also not checking whether the
allocation succeeded in the first place.
It is also incomplete in that it still does not handle the case where
stream name of the widget is a substring of the stream name of the DAI,
which is explicitly allowed and works fine if no DAPM prefix is used.
Revert the commit and take a slightly different approach to solving the
issue. Instead of comparing the widget's stream name to the name of the DAI
widget compare it to the stream name of the DAI widget. The stream name of
the DAI widget is identical to the name of the DAI widget except that it
wont have the DAPM prefix added. So this approach behaves identical
regardless to whether the DAPM context uses a prefix or not.
We don't have to worry about potentially matching with a widget with the
same stream name, but from a different DAPM context with a different
prefix, since the code already makes sure that both the DAI widget and the
matched widget are from the same DAPM context.
Fixes: fdb6eb0a1287 ("ASoC: dapm: Modify widget stream name according to prefix")
Signed-off-by: Lars-Peter Clausen <[email protected]>
Signed-off-by: Mark Brown <[email protected]>
Cc: [email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
sound/soc/soc-dapm.c | 12 +++---------
1 file changed, 3 insertions(+), 9 deletions(-)
diff --git a/sound/soc/soc-dapm.c b/sound/soc/soc-dapm.c
index d8ac9e5e2c00..d15c34e2f04f 100644
--- a/sound/soc/soc-dapm.c
+++ b/sound/soc/soc-dapm.c
@@ -3087,16 +3087,10 @@ snd_soc_dapm_new_control(struct snd_soc_dapm_context *dapm,
}
prefix = soc_dapm_prefix(dapm);
- if (prefix) {
+ if (prefix)
w->name = kasprintf(GFP_KERNEL, "%s %s", prefix, widget->name);
- if (widget->sname)
- w->sname = kasprintf(GFP_KERNEL, "%s %s", prefix,
- widget->sname);
- } else {
+ else
w->name = kasprintf(GFP_KERNEL, "%s", widget->name);
- if (widget->sname)
- w->sname = kasprintf(GFP_KERNEL, "%s", widget->sname);
- }
if (w->name == NULL) {
kfree(w);
return NULL;
@@ -3422,7 +3416,7 @@ int snd_soc_dapm_link_dai_widgets(struct snd_soc_card *card)
break;
}
- if (!w->sname || !strstr(w->sname, dai_w->name))
+ if (!w->sname || !strstr(w->sname, dai_w->sname))
continue;
if (dai_w->id == snd_soc_dapm_dai_in) {
--
2.17.1
From: Daniel Borkmann <[email protected]>
[ Upstream commit 025331df34f6722f86b467cb13a69326444ab1bc ]
When allocating rtnl dump messages, struct ifla_port_vsi is never dumped,
so we can save header plus payload in rtnl_port_size(). Infact, attribute
IFLA_PORT_VSI_TYPE and struct ifla_port_vsi are not used anywhere in
the kernel. We only need to keep the nla policy should applications in
user space be filling this out. Same NLA_BINARY issue exists as was fixed
in 364d5716a7ad ("rtnetlink: ifla_vf_policy: fix misuses of NLA_BINARY")
and others, but then again IFLA_PORT_VSI_TYPE is not used anywhere, so
just add a comment that it's unused.
Signed-off-by: Daniel Borkmann <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/core/rtnetlink.c | 11 +++++++----
1 file changed, 7 insertions(+), 4 deletions(-)
diff --git a/net/core/rtnetlink.c b/net/core/rtnetlink.c
index 51301ad3c2d9..cd09f85ba8d6 100644
--- a/net/core/rtnetlink.c
+++ b/net/core/rtnetlink.c
@@ -817,8 +817,6 @@ static size_t rtnl_port_size(const struct net_device *dev,
{
size_t port_size = nla_total_size(4) /* PORT_VF */
+ nla_total_size(PORT_PROFILE_MAX) /* PORT_PROFILE */
- + nla_total_size(sizeof(struct ifla_port_vsi))
- /* PORT_VSI_TYPE */
+ nla_total_size(PORT_UUID_MAX) /* PORT_INSTANCE_UUID */
+ nla_total_size(PORT_UUID_MAX) /* PORT_HOST_UUID */
+ nla_total_size(1) /* PROT_VDP_REQUEST */
@@ -1231,14 +1229,19 @@ static const struct nla_policy ifla_port_policy[IFLA_PORT_MAX+1] = {
[IFLA_PORT_VF] = { .type = NLA_U32 },
[IFLA_PORT_PROFILE] = { .type = NLA_STRING,
.len = PORT_PROFILE_MAX },
- [IFLA_PORT_VSI_TYPE] = { .type = NLA_BINARY,
- .len = sizeof(struct ifla_port_vsi)},
[IFLA_PORT_INSTANCE_UUID] = { .type = NLA_BINARY,
.len = PORT_UUID_MAX },
[IFLA_PORT_HOST_UUID] = { .type = NLA_STRING,
.len = PORT_UUID_MAX },
[IFLA_PORT_REQUEST] = { .type = NLA_U8, },
[IFLA_PORT_RESPONSE] = { .type = NLA_U16, },
+
+ /* Unused, but we need to keep it here since user space could
+ * fill it. It's also broken with regard to NLA_BINARY use in
+ * combination with structs.
+ */
+ [IFLA_PORT_VSI_TYPE] = { .type = NLA_BINARY,
+ .len = sizeof(struct ifla_port_vsi) },
};
static int rtnl_dump_ifinfo(struct sk_buff *skb, struct netlink_callback *cb)
--
2.17.1
From: Jan Kara <[email protected]>
[ Upstream commit 7e08da50cf706151f324349f9235ebd311226997 ]
Currently quota format that supports 64-bit usage sets maximum quota
limit as 2^64-1. However quota core code uses signed numbers to track
usage and even limits themselves are stored in long long. Checking of
maximum allowable limits worked by luck until commit 14bf61ffe6ac
(quota: Switch ->get_dqblk() and ->set_dqblk() to use bytes as space
units) because variable we compared with was unsigned. After that commit
the type we compared against changed to signed and thus checks for
maximum limits with the newest VFS quota format started to refuse any
non-negative value. Later the problem was inadvertedly fixed by commit
b10a08194c2b (quota: Store maximum space limit in bytes) because we
started to compare against unsigned type as well.
Fix possible future problems of this kind by setting maximum limits to
2^63-1 to avoid overflow issues.
Reported-by: Carlos Carvalho <[email protected]>
Signed-off-by: Jan Kara <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/quota/quota_v2.c | 12 ++++++++----
1 file changed, 8 insertions(+), 4 deletions(-)
diff --git a/fs/quota/quota_v2.c b/fs/quota/quota_v2.c
index d1a8054bba9a..5d9fc7918e24 100644
--- a/fs/quota/quota_v2.c
+++ b/fs/quota/quota_v2.c
@@ -117,12 +117,16 @@ static int v2_read_file_info(struct super_block *sb, int type)
qinfo = info->dqi_priv;
if (version == 0) {
/* limits are stored as unsigned 32-bit data */
- info->dqi_max_spc_limit = 0xffffffffULL << QUOTABLOCK_BITS;
+ info->dqi_max_spc_limit = 0xffffffffLL << QUOTABLOCK_BITS;
info->dqi_max_ino_limit = 0xffffffff;
} else {
- /* used space is stored as unsigned 64-bit value in bytes */
- info->dqi_max_spc_limit = 0xffffffffffffffffULL; /* 2^64-1 */
- info->dqi_max_ino_limit = 0xffffffffffffffffULL;
+ /*
+ * Used space is stored as unsigned 64-bit value in bytes but
+ * quota core supports only signed 64-bit values so use that
+ * as a limit
+ */
+ info->dqi_max_spc_limit = 0x7fffffffffffffffLL; /* 2^63-1 */
+ info->dqi_max_ino_limit = 0x7fffffffffffffffLL;
}
info->dqi_bgrace = le32_to_cpu(dinfo.dqi_bgrace);
info->dqi_igrace = le32_to_cpu(dinfo.dqi_igrace);
--
2.17.1
From: Heiko Stübner <[email protected]>
[ Upstream commit a5e1baf7dca10f8cf945394034013260297bc416 ]
Lockdep reported a possible deadlock between the cpuclk lock and for example
the i2c driver.
CPU0 CPU1
---- ----
lock(clk_lock);
local_irq_disable();
lock(&(&i2c->lock)->rlock);
lock(clk_lock);
<Interrupt>
lock(&(&i2c->lock)->rlock);
*** DEADLOCK ***
The generic clock-types of the core ccf already use spin_lock_irqsave when
touching clock registers, so do the same for the cpuclk.
Signed-off-by: Heiko Stuebner <[email protected]>
Reviewed-by: Doug Anderson <[email protected]>
Signed-off-by: Michael Turquette <[email protected]>
[[email protected]: removed initialization of "flags"]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/clk/rockchip/clk-cpu.c | 10 ++++++----
1 file changed, 6 insertions(+), 4 deletions(-)
diff --git a/drivers/clk/rockchip/clk-cpu.c b/drivers/clk/rockchip/clk-cpu.c
index 75c8c45ef728..8539c4fd34cc 100644
--- a/drivers/clk/rockchip/clk-cpu.c
+++ b/drivers/clk/rockchip/clk-cpu.c
@@ -124,10 +124,11 @@ static int rockchip_cpuclk_pre_rate_change(struct rockchip_cpuclk *cpuclk,
{
const struct rockchip_cpuclk_reg_data *reg_data = cpuclk->reg_data;
unsigned long alt_prate, alt_div;
+ unsigned long flags;
alt_prate = clk_get_rate(cpuclk->alt_parent);
- spin_lock(cpuclk->lock);
+ spin_lock_irqsave(cpuclk->lock, flags);
/*
* If the old parent clock speed is less than the clock speed
@@ -164,7 +165,7 @@ static int rockchip_cpuclk_pre_rate_change(struct rockchip_cpuclk *cpuclk,
cpuclk->reg_base + reg_data->core_reg);
}
- spin_unlock(cpuclk->lock);
+ spin_unlock_irqrestore(cpuclk->lock, flags);
return 0;
}
@@ -173,6 +174,7 @@ static int rockchip_cpuclk_post_rate_change(struct rockchip_cpuclk *cpuclk,
{
const struct rockchip_cpuclk_reg_data *reg_data = cpuclk->reg_data;
const struct rockchip_cpuclk_rate_table *rate;
+ unsigned long flags;
rate = rockchip_get_cpuclk_settings(cpuclk, ndata->new_rate);
if (!rate) {
@@ -181,7 +183,7 @@ static int rockchip_cpuclk_post_rate_change(struct rockchip_cpuclk *cpuclk,
return -EINVAL;
}
- spin_lock(cpuclk->lock);
+ spin_lock_irqsave(cpuclk->lock, flags);
if (ndata->old_rate < ndata->new_rate)
rockchip_cpuclk_set_dividers(cpuclk, rate);
@@ -201,7 +203,7 @@ static int rockchip_cpuclk_post_rate_change(struct rockchip_cpuclk *cpuclk,
if (ndata->old_rate > ndata->new_rate)
rockchip_cpuclk_set_dividers(cpuclk, rate);
- spin_unlock(cpuclk->lock);
+ spin_unlock_irqrestore(cpuclk->lock, flags);
return 0;
}
--
2.17.1
From: Vineet Gupta <[email protected]>
[ Upstream commit ea1fe3a88763d4dfef7e2529ba606f96e8e6b271 ]
This is due to duplicated unistd inclusion (via uClibc headers + kernel headers)
Also seen on ARM uClibc based tools
------- ARC build ---------->8-------------
CC util/evlist.o
In file included from
~/arc/k.org/arch/arc/include/uapi/asm/unistd.h:25:0,
from util/../perf-sys.h:10,
from util/../perf.h:15,
from util/event.h:7,
from util/event.c:3:
~/arc/k.org/include/uapi/asm-generic/unistd.h:906:0:
warning: "__NR_fcntl64" redefined [enabled by default]
#define __NR_fcntl64 __NR3264_fcntl
^
In file included from
~/arc/gnu/INSTALL_1412-arc-2014.12-rc1/arc-snps-linux-uclibc/sysroot/usr/include/sys/syscall.h:24:0,
from util/../perf-sys.h:6,
----------------->8-------------------
------- ARM build ---------->8-------------
CC FPIC plugin_scsi.o
In file included from util/../perf-sys.h:9:0,
from util/../perf.h:15,
from util/cache.h:7,
from perf.c:12:
~/arc/k.org/arch/arm/include/uapi/asm/unistd.h:28:0:
warning: "__NR_restart_syscall" redefined [enabled by default]
In file included from
~/buildroot/host/usr/arm-buildroot-linux-uclibcgnueabi/sysroot/usr/include/sys/syscall.h:25:0,
from util/../perf-sys.h:6,
from util/../perf.h:15,
from util/cache.h:7,
from perf.c:12:
~/buildroot/host/usr/arm-buildroot-linux-uclibcgnueabi/sysroot/usr/include/bits/sysnum.h:17:0:
note: this is the location of the previous definition
----------------->8-------------------
Signed-off-by: Vineet Gupta <[email protected]>
Cc: Alexey Brodkin <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
tools/perf/bench/sched-pipe.c | 2 +-
tools/perf/builtin-top.c | 1 -
tools/perf/perf-sys.h | 1 -
3 files changed, 1 insertion(+), 3 deletions(-)
diff --git a/tools/perf/bench/sched-pipe.c b/tools/perf/bench/sched-pipe.c
index 07a8d7646a15..005cc283790c 100644
--- a/tools/perf/bench/sched-pipe.c
+++ b/tools/perf/bench/sched-pipe.c
@@ -19,12 +19,12 @@
#include <stdlib.h>
#include <signal.h>
#include <sys/wait.h>
-#include <linux/unistd.h>
#include <string.h>
#include <errno.h>
#include <assert.h>
#include <sys/time.h>
#include <sys/types.h>
+#include <sys/syscall.h>
#include <pthread.h>
diff --git a/tools/perf/builtin-top.c b/tools/perf/builtin-top.c
index 8e37334db4fa..c5b9c3f01d85 100644
--- a/tools/perf/builtin-top.c
+++ b/tools/perf/builtin-top.c
@@ -66,7 +66,6 @@
#include <sys/utsname.h>
#include <sys/mman.h>
-#include <linux/unistd.h>
#include <linux/types.h>
static volatile int done;
diff --git a/tools/perf/perf-sys.h b/tools/perf/perf-sys.h
index a3b13d7dc1d4..6ef68165c9db 100644
--- a/tools/perf/perf-sys.h
+++ b/tools/perf/perf-sys.h
@@ -6,7 +6,6 @@
#include <sys/syscall.h>
#include <linux/types.h>
#include <linux/perf_event.h>
-#include <asm/unistd.h>
#if defined(__i386__)
#define mb() asm volatile("lock; addl $0,0(%%esp)" ::: "memory")
--
2.17.1
From: Uwe Kleine-König <[email protected]>
[ Upstream commit 9911a2d5e9d14e39692b751929a92cb5a1d9d0e0 ]
The code in pinctrl-imx.c only works correctly if in the
imx_pinctrl_soc_info passed to imx_pinctrl_probe we have:
info->pins[i].number = i
conf_reg(info->pins[i]) = 4 * i
(which conf_reg(pin) being the offset of the pin's configuration
register).
When the imx25 specific part was introduced in b4a87c9b966f ("pinctrl:
pinctrl-imx: add imx25 pinctrl driver") we had:
info->pins[i].number = i + 1
conf_reg(info->pins[i]) = 4 * i
. Commit 34027ca2bbc6 ("pinctrl: imx25: fix numbering for pins") tried
to fix that but made the situation:
info->pins[i-1].number = i
conf_reg(info->pins[i-1]) = 4 * i
which is hardly better but fixed the error seen back then.
So insert another reserved entry in the array to finally yield:
info->pins[i].number = i
conf_reg(info->pins[i]) = 4 * i
Fixes: 34027ca2bbc6 ("pinctrl: imx25: fix numbering for pins")
Signed-off-by: Uwe Kleine-König <[email protected]>
Signed-off-by: Linus Walleij <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/pinctrl/freescale/pinctrl-imx25.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/pinctrl/freescale/pinctrl-imx25.c b/drivers/pinctrl/freescale/pinctrl-imx25.c
index b5fabf684632..23e480b5da3e 100644
--- a/drivers/pinctrl/freescale/pinctrl-imx25.c
+++ b/drivers/pinctrl/freescale/pinctrl-imx25.c
@@ -26,7 +26,8 @@
#include "pinctrl-imx.h"
enum imx25_pads {
- MX25_PAD_RESERVE0 = 1,
+ MX25_PAD_RESERVE0 = 0,
+ MX25_PAD_RESERVE1 = 1,
MX25_PAD_A10 = 2,
MX25_PAD_A13 = 3,
MX25_PAD_A14 = 4,
@@ -169,6 +170,7 @@ enum imx25_pads {
/* Pad names for the pinmux subsystem */
static const struct pinctrl_pin_desc imx25_pinctrl_pads[] = {
IMX_PINCTRL_PIN(MX25_PAD_RESERVE0),
+ IMX_PINCTRL_PIN(MX25_PAD_RESERVE1),
IMX_PINCTRL_PIN(MX25_PAD_A10),
IMX_PINCTRL_PIN(MX25_PAD_A13),
IMX_PINCTRL_PIN(MX25_PAD_A14),
--
2.17.1
From: Jisheng Zhang <[email protected]>
[ Upstream commit e43d0189ac02415fe4487f79fc35e8f147e9ea0d ]
Commit b253149b843f ("sched/idle/x86: Restore mwait_idle() to fix boot
hangs, to improve power savings and to improve performance") restores
mwait_idle(), but the trace_cpu_idle related calls are missing. This
causes powertop on my old desktop powered by Intel Core2 E6550 to
report zero wakeups and zero events.
Add them back to restore the proper behaviour.
Fixes: b253149b843f ("sched/idle/x86: Restore mwait_idle() to ...")
Signed-off-by: Jisheng Zhang <[email protected]>
Cc: <[email protected]>
Cc: [email protected] # 4.1
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Thomas Gleixner <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/x86/kernel/process.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/arch/x86/kernel/process.c b/arch/x86/kernel/process.c
index a388bb883128..54499d34cf55 100644
--- a/arch/x86/kernel/process.c
+++ b/arch/x86/kernel/process.c
@@ -430,6 +430,7 @@ static int prefer_mwait_c1_over_halt(const struct cpuinfo_x86 *c)
static void mwait_idle(void)
{
if (!current_set_polling_and_test()) {
+ trace_cpu_idle_rcuidle(1, smp_processor_id());
if (this_cpu_has(X86_BUG_CLFLUSH_MONITOR)) {
smp_mb(); /* quirk */
clflush((void *)¤t_thread_info()->flags);
@@ -441,6 +442,7 @@ static void mwait_idle(void)
__sti_mwait(0, 0);
else
local_irq_enable();
+ trace_cpu_idle_rcuidle(PWR_EVENT_EXIT, smp_processor_id());
} else {
local_irq_enable();
}
--
2.17.1
From: Ezequiel Garcia <[email protected]>
[ Upstream commit 7363cb7de3999e84243bca79ffea257fd86a2cc6 ]
cpu_set was removed (along with a bunch of cpumask helpers) by
commit 2f0f267ea072 ("cpumask: remove deprecated functions.").
Fix this by replacing cpu_set with cpumask_set_cpu. Without this
fix the following error is triggered when CONFIG_MIPS_MT_FPAFF=y.
arch/mips/kernel/smp-cps.c: In function 'cps_smp_setup':
arch/mips/kernel/smp-cps.c:95:3: error: implicit declaration of function 'cpu_set' [-Werror=implicit-function-declaration]
Fixes: 90db024f140d ("MIPS: smp-cps: cpu_set FPU mask if FPU present")
Signed-off-by: Ezequiel Garcia <[email protected]>
Acked-by: Niklas Cassel <[email protected]>
Cc: [email protected]
Patchwork: https://patchwork.linux-mips.org/patch/9912/
Signed-off-by: Ralf Baechle <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/mips/kernel/smp-cps.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/mips/kernel/smp-cps.c b/arch/mips/kernel/smp-cps.c
index 0854f17829f3..5680ff0eb599 100644
--- a/arch/mips/kernel/smp-cps.c
+++ b/arch/mips/kernel/smp-cps.c
@@ -92,7 +92,7 @@ static void __init cps_smp_setup(void)
#ifdef CONFIG_MIPS_MT_FPAFF
/* If we have an FPU, enroll ourselves in the FPU-full mask */
if (cpu_has_fpu)
- cpu_set(0, mt_fpu_cpumask);
+ cpumask_set_cpu(0, &mt_fpu_cpumask);
#endif /* CONFIG_MIPS_MT_FPAFF */
}
--
2.17.1
From: Namhyung Kim <[email protected]>
[ Upstream commit 813ccd15452ed34e97aa526ffc70d6d8e6c466c5 ]
Currently the symbol structure is allocated with symbol_conf.priv_size
to carry sideband information like annotation, map browser on TUI and
sort-by-name tree node. So retrieving these information from symbol
needs to care about the details of such placement.
However the annotation code just assumes that the symbol is placed after
the struct annotation. But actually there's other info between them.
So accessing those struct will lead to an undefined behavior (usually a
crash) after they write their info to the same location.
To reproduce the problem, please follow the steps below:
1. run perf report (TUI of course) with -v option
2. open map browser (by pressing right arrow key for any entry)
3. search any function (by pressing '/' key and input whatever..)
4. return to the hist browser (by pressing 'q' or left arrow key)
5. open annotation window for the same entry (by pressing 'a' key)
Signed-off-by: Namhyung Kim <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Masami Hiramatsu <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
tools/perf/util/annotate.h | 8 +-------
1 file changed, 1 insertion(+), 7 deletions(-)
diff --git a/tools/perf/util/annotate.h b/tools/perf/util/annotate.h
index 112d6e268150..dfa6c4c36b3e 100644
--- a/tools/perf/util/annotate.h
+++ b/tools/perf/util/annotate.h
@@ -115,11 +115,6 @@ struct annotation {
struct annotated_source *src;
};
-struct sannotation {
- struct annotation annotation;
- struct symbol symbol;
-};
-
static inline struct sym_hist *annotation__histogram(struct annotation *notes, int idx)
{
return (((void *)¬es->src->histograms) +
@@ -128,8 +123,7 @@ static inline struct sym_hist *annotation__histogram(struct annotation *notes, i
static inline struct annotation *symbol__annotation(struct symbol *sym)
{
- struct sannotation *a = container_of(sym, struct sannotation, symbol);
- return &a->annotation;
+ return (void *)sym - symbol_conf.priv_size;
}
int addr_map_symbol__inc_samples(struct addr_map_symbol *ams, int evidx);
--
2.17.1
From: Marc Zyngier <[email protected]>
[ Upstream commit 90f6e150e44a0dc3883110eeb3ab35d1be42b6bb ]
We don't hold the mmap_sem while searching for the VMAs when
we try to unmap each memslot for a VM. Fix this properly to
avoid unexpected results.
Fixes: commit 957db105c997 ("arm/arm64: KVM: Introduce stage2_unmap_vm")
Cc: [email protected] # v3.19+
Reviewed-by: Christoffer Dall <[email protected]>
Signed-off-by: Suzuki K Poulose <[email protected]>
Signed-off-by: Marc Zyngier <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm/kvm/mmu.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/arch/arm/kvm/mmu.c b/arch/arm/kvm/mmu.c
index e506389d02fb..017d6d1e1766 100644
--- a/arch/arm/kvm/mmu.c
+++ b/arch/arm/kvm/mmu.c
@@ -760,6 +760,7 @@ void stage2_unmap_vm(struct kvm *kvm)
int idx;
idx = srcu_read_lock(&kvm->srcu);
+ down_read(¤t->mm->mmap_sem);
spin_lock(&kvm->mmu_lock);
slots = kvm_memslots(kvm);
@@ -767,6 +768,7 @@ void stage2_unmap_vm(struct kvm *kvm)
stage2_unmap_memslot(kvm, memslot);
spin_unlock(&kvm->mmu_lock);
+ up_read(¤t->mm->mmap_sem);
srcu_read_unlock(&kvm->srcu, idx);
}
--
2.17.1
From: Alexander Stein <[email protected]>
[ Upstream commit 55eb9c343fdd3611ae3de6ab8a8512f303d3f581 ]
atmel_lcdfb needs also uses hclk clock, but AT91SAM9263 doesn't have that
specific clock, so use lcd_clk twice. The same was done in
arch/arm/mach-at91/at91sam9263.c
Signed-off-by: Alexander Stein <[email protected]>
Acked-by: Alexandre Belloni <[email protected]>
Signed-off-by: Nicolas Ferre <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm/boot/dts/at91sam9263.dtsi | 2 ++
1 file changed, 2 insertions(+)
diff --git a/arch/arm/boot/dts/at91sam9263.dtsi b/arch/arm/boot/dts/at91sam9263.dtsi
index 51416c7d0625..272fdd64197c 100644
--- a/arch/arm/boot/dts/at91sam9263.dtsi
+++ b/arch/arm/boot/dts/at91sam9263.dtsi
@@ -913,6 +913,8 @@
interrupts = <26 IRQ_TYPE_LEVEL_HIGH 3>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_fb>;
+ clocks = <&lcd_clk>, <&lcd_clk>;
+ clock-names = "lcdc_clk", "hclk";
status = "disabled";
};
--
2.17.1
From: Jeff Layton <[email protected]>
[ Upstream commit 5d05e54af3cdbb13cf19c557ff2184781b91a22c ]
Chuck pointed out a problem that crept in with commit 6ffa30d3f734 (nfs:
don't call blocking operations while !TASK_RUNNING). Linux counts tasks
in uninterruptible sleep against the load average, so this caused the
system's load average to be pinned at at least 1 when there was a
NFSv4.1+ mount active.
Not a huge problem, but it's probably worth fixing before we get too
many complaints about it. This patch converts the code back to use
TASK_INTERRUPTIBLE sleep, simply has it flush any signals on each loop
iteration. In practice no one should really be signalling this thread at
all, so I think this is reasonably safe.
With this change, there's also no need to game the hung task watchdog so
we can also convert the schedule_timeout call back to a normal schedule.
Cc: <[email protected]>
Reported-by: Chuck Lever <[email protected]>
Signed-off-by: Jeff Layton <[email protected]>
Tested-by: Chuck Lever <[email protected]>
Fixes: commit 6ffa30d3f734 (“nfs: don't call blocking . . .”)
Signed-off-by: Trond Myklebust <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/nfs/callback.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/fs/nfs/callback.c b/fs/nfs/callback.c
index 3b8cdb8298c4..a78558a25035 100644
--- a/fs/nfs/callback.c
+++ b/fs/nfs/callback.c
@@ -128,7 +128,7 @@ nfs41_callback_svc(void *vrqstp)
if (try_to_freeze())
continue;
- prepare_to_wait(&serv->sv_cb_waitq, &wq, TASK_UNINTERRUPTIBLE);
+ prepare_to_wait(&serv->sv_cb_waitq, &wq, TASK_INTERRUPTIBLE);
spin_lock_bh(&serv->sv_cb_lock);
if (!list_empty(&serv->sv_cb_list)) {
req = list_first_entry(&serv->sv_cb_list,
@@ -142,10 +142,10 @@ nfs41_callback_svc(void *vrqstp)
error);
} else {
spin_unlock_bh(&serv->sv_cb_lock);
- /* schedule_timeout to game the hung task watchdog */
- schedule_timeout(60 * HZ);
+ schedule();
finish_wait(&serv->sv_cb_waitq, &wq);
}
+ flush_signals(current);
}
return 0;
}
--
2.17.1
From: Bo Shen <[email protected]>
[ Upstream commit 04582fd03fb263598e3b126c76cc42195aa0fd05 ]
The MICBIAS is a supply, should route to MIC while not IN1L.
Signed-off-by: Bo Shen <[email protected]>
Signed-off-by: Nicolas Ferre <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm/boot/dts/sama5d3xmb.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/sama5d3xmb.dtsi b/arch/arm/boot/dts/sama5d3xmb.dtsi
index 49c10d33df30..77e03655aca3 100644
--- a/arch/arm/boot/dts/sama5d3xmb.dtsi
+++ b/arch/arm/boot/dts/sama5d3xmb.dtsi
@@ -176,7 +176,7 @@
"Headphone Jack", "HPOUTR",
"IN2L", "Line In Jack",
"IN2R", "Line In Jack",
- "MICBIAS", "IN1L",
+ "Mic", "MICBIAS",
"IN1L", "Mic";
atmel,ssc-controller = <&ssc0>;
--
2.17.1
From: Bo Shen <[email protected]>
[ Upstream commit 0068b2e1b7f925a818fdc0a5d10ef0ad40f746e7 ]
The second property of reg is the length, so correct it for timer.
Signed-off-by: Bo Shen <[email protected]>
Signed-off-by: Nicolas Ferre <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm/boot/dts/sama5d4.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/sama5d4.dtsi b/arch/arm/boot/dts/sama5d4.dtsi
index 0837c1afd666..24e7b237c048 100644
--- a/arch/arm/boot/dts/sama5d4.dtsi
+++ b/arch/arm/boot/dts/sama5d4.dtsi
@@ -939,7 +939,7 @@
pit: timer@fc068630 {
compatible = "atmel,at91sam9260-pit";
- reg = <0xfc068630 0xf>;
+ reg = <0xfc068630 0x10>;
interrupts = <3 IRQ_TYPE_LEVEL_HIGH 5>;
clocks = <&h32ck>;
};
--
2.17.1
From: Johannes Thumshirn <[email protected]>
[ Upstream commit 7b7c54914f73966976893747ee8e2ca58166a627 ]
Currently it is not possible to have a kernel with built-in MCB attached
devices. This results out of the fact that mcb-pci requests PCI BAR 0, then
parses the chameleon table and calls the driver's probe function before
releasing BAR 0 again. When building the kernel with modules this is not a
problem (and therefore it wasn't detected by my tests yet).
A solution is to only remap the 1st 0x200 bytes of a Chameleon PCI device.
0x200 bytes is the maximum size of a Chameleon v2 Table.
Also this patch stops disabling the PCI device on successful registration of MCB
devices.
Signed-off-by: Johannes Thumshirn <[email protected]>
Suggested-by: Bjorn Helgaas <[email protected]>
Reviewed-by: Bjorn Helgaas <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/mcb/mcb-internal.h | 1 +
drivers/mcb/mcb-pci.c | 27 ++++++++++++++++++---------
2 files changed, 19 insertions(+), 9 deletions(-)
diff --git a/drivers/mcb/mcb-internal.h b/drivers/mcb/mcb-internal.h
index f956ef26c0ce..fb7493dcfb79 100644
--- a/drivers/mcb/mcb-internal.h
+++ b/drivers/mcb/mcb-internal.h
@@ -7,6 +7,7 @@
#define PCI_DEVICE_ID_MEN_CHAMELEON 0x4d45
#define CHAMELEON_FILENAME_LEN 12
#define CHAMELEONV2_MAGIC 0xabce
+#define CHAM_HEADER_SIZE 0x200
enum chameleon_descriptor_type {
CHAMELEON_DTYPE_GENERAL = 0x0,
diff --git a/drivers/mcb/mcb-pci.c b/drivers/mcb/mcb-pci.c
index b59181965643..5e1bd5db02c8 100644
--- a/drivers/mcb/mcb-pci.c
+++ b/drivers/mcb/mcb-pci.c
@@ -17,6 +17,7 @@
struct priv {
struct mcb_bus *bus;
+ phys_addr_t mapbase;
void __iomem *base;
};
@@ -31,8 +32,8 @@ static int mcb_pci_get_irq(struct mcb_device *mdev)
static int mcb_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
{
+ struct resource *res;
struct priv *priv;
- phys_addr_t mapbase;
int ret;
int num_cells;
unsigned long flags;
@@ -47,19 +48,21 @@ static int mcb_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
return -ENODEV;
}
- mapbase = pci_resource_start(pdev, 0);
- if (!mapbase) {
+ priv->mapbase = pci_resource_start(pdev, 0);
+ if (!priv->mapbase) {
dev_err(&pdev->dev, "No PCI resource\n");
goto err_start;
}
- ret = pci_request_region(pdev, 0, KBUILD_MODNAME);
- if (ret) {
- dev_err(&pdev->dev, "Failed to request PCI BARs\n");
+ res = request_mem_region(priv->mapbase, CHAM_HEADER_SIZE,
+ KBUILD_MODNAME);
+ if (IS_ERR(res)) {
+ dev_err(&pdev->dev, "Failed to request PCI memory\n");
+ ret = PTR_ERR(res);
goto err_start;
}
- priv->base = pci_iomap(pdev, 0, 0);
+ priv->base = ioremap(priv->mapbase, CHAM_HEADER_SIZE);
if (!priv->base) {
dev_err(&pdev->dev, "Cannot ioremap\n");
ret = -ENOMEM;
@@ -84,7 +87,7 @@ static int mcb_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
priv->bus->get_irq = mcb_pci_get_irq;
- ret = chameleon_parse_cells(priv->bus, mapbase, priv->base);
+ ret = chameleon_parse_cells(priv->bus, priv->mapbase, priv->base);
if (ret < 0)
goto err_drvdata;
num_cells = ret;
@@ -93,8 +96,10 @@ static int mcb_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
mcb_bus_add_devices(priv->bus);
+ return 0;
+
err_drvdata:
- pci_iounmap(pdev, priv->base);
+ iounmap(priv->base);
err_ioremap:
pci_release_region(pdev, 0);
err_start:
@@ -107,6 +112,10 @@ static void mcb_pci_remove(struct pci_dev *pdev)
struct priv *priv = pci_get_drvdata(pdev);
mcb_release_bus(priv->bus);
+
+ iounmap(priv->base);
+ release_region(priv->mapbase, CHAM_HEADER_SIZE);
+ pci_disable_device(pdev);
}
static const struct pci_device_id mcb_pci_tbl[] = {
--
2.17.1
From: Peter Hurley <[email protected]>
[ Upstream commit 2ce3c10c0c3e0d418c1a7a4c838319ba42c75388 ]
This reverts commit c4dc304677e8d566572c4738d95c48be150c6606.
This fix is superseded by commit 52bce7f8d4fc633c9a9d0646eef58ba6ae9a3b73,
'pty, n_tty: Simplify input processing on final close'.
The final close now waits for input processing to complete before
destroying the pty, so poll() does not need to special case this
condition.
Cc: Francesco Ruggeri <[email protected]>
Signed-off-by: Peter Hurley <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/tty/n_tty.c | 9 ++-------
1 file changed, 2 insertions(+), 7 deletions(-)
diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c
index 6acdd553b707..0ed99ad74bee 100644
--- a/drivers/tty/n_tty.c
+++ b/drivers/tty/n_tty.c
@@ -2472,17 +2472,12 @@ static unsigned int n_tty_poll(struct tty_struct *tty, struct file *file,
poll_wait(file, &tty->read_wait, wait);
poll_wait(file, &tty->write_wait, wait);
- if (test_bit(TTY_OTHER_CLOSED, &tty->flags))
- mask |= POLLHUP;
if (input_available_p(tty, 1))
mask |= POLLIN | POLLRDNORM;
- else if (mask & POLLHUP) {
- tty_flush_to_ldisc(tty);
- if (input_available_p(tty, 1))
- mask |= POLLIN | POLLRDNORM;
- }
if (tty->packet && tty->link->ctrl_status)
mask |= POLLPRI | POLLIN | POLLRDNORM;
+ if (test_bit(TTY_OTHER_CLOSED, &tty->flags))
+ mask |= POLLHUP;
if (tty_hung_up_p(file))
mask |= POLLHUP;
if (!(mask & (POLLHUP | POLLIN | POLLRDNORM))) {
--
2.17.1
From: Lorenzo Pieralisi <[email protected]>
[ Upstream commit feb28979c137ba3f649ad36fc27c85c64c111f78 ]
Commit d2be00c0fb5a ("of/pci: Free resources on failure in
of_pci_get_host_bridge_resources()") fixed the error path so it frees
everything on the "resources" list. That list includes the bus_range, so
we should not free it again.
Remove the superfluous free of bus_range.
[bhelgaas: changelog]
Fixes: d2be00c0fb5a ("of/pci: Free resources on failure in of_pci_get_host_bridge_resources()")
Reported-by: Jiang Liu <[email protected]>
Signed-off-by: Lorenzo Pieralisi <[email protected]>
Signed-off-by: Bjorn Helgaas <[email protected]>
CC: Rafael J. Wysocki <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/of/of_pci.c | 1 -
1 file changed, 1 deletion(-)
diff --git a/drivers/of/of_pci.c b/drivers/of/of_pci.c
index ecc5fa5640d2..8a74b1d399a1 100644
--- a/drivers/of/of_pci.c
+++ b/drivers/of/of_pci.c
@@ -229,7 +229,6 @@ int of_pci_get_host_bridge_resources(struct device_node *dev,
list_for_each_entry(window, resources, list)
kfree(window->res);
pci_free_resource_list(resources);
- kfree(bus_range);
return err;
}
EXPORT_SYMBOL_GPL(of_pci_get_host_bridge_resources);
--
2.17.1
From: Vince Hsu <[email protected]>
[ Upstream commit f56e67f0a880a5b795cdb5f62614aafe264c5304 ]
The commit 1290a958d48e ("usb: phy: propagate __of_usb_find_phy()'s error on
failure") changed the condition to return -EPROBE_DEFER to host driver.
Originally the Tegra host driver depended on the returned -EPROBE_DEFER to
get the phy device later when booting. Now we have to do that explicitly.
Signed-off-by: Vince Hsu <[email protected]>
Tested-by: Tomeu Vizoso <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/usb/host/ehci-tegra.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/usb/host/ehci-tegra.c b/drivers/usb/host/ehci-tegra.c
index aad253559bcd..b4cc4c90b8e3 100644
--- a/drivers/usb/host/ehci-tegra.c
+++ b/drivers/usb/host/ehci-tegra.c
@@ -451,7 +451,7 @@ static int tegra_ehci_probe(struct platform_device *pdev)
u_phy = devm_usb_get_phy_by_phandle(&pdev->dev, "nvidia,phy", 0);
if (IS_ERR(u_phy)) {
- err = PTR_ERR(u_phy);
+ err = -EPROBE_DEFER;
goto cleanup_clk_en;
}
hcd->usb_phy = u_phy;
--
2.17.1
From: "Darrick J. Wong" <[email protected]>
[ Upstream commit 36d1ffdb210ec2d0d6a69e9f6466ae8727d34119 ]
The Apricorn SATA dongle will occasionally return "USBSUSBSUSB" in
response to SCSI commands when running in UAS mode. Therefore,
disable UAS mode on this dongle.
Signed-off-by: Darrick J. Wong <[email protected]>
Acked-by: Hans de Goede <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/usb/storage/unusual_uas.h | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/drivers/usb/storage/unusual_uas.h b/drivers/usb/storage/unusual_uas.h
index baf671aef9d0..31c79b1f970e 100644
--- a/drivers/usb/storage/unusual_uas.h
+++ b/drivers/usb/storage/unusual_uas.h
@@ -40,6 +40,16 @@
* and don't forget to CC: the USB development list <[email protected]>
*/
+/*
+ * Apricorn USB3 dongle sometimes returns "USBSUSBSUSBS" in response to SCSI
+ * commands in UAS mode. Observed with the 1.28 firmware; are there others?
+ */
+UNUSUAL_DEV(0x0984, 0x0301, 0x0128, 0x0128,
+ "Apricorn",
+ "",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+ US_FL_IGNORE_UAS),
+
/* https://bugzilla.kernel.org/show_bug.cgi?id=79511 */
UNUSUAL_DEV(0x0bc2, 0x2312, 0x0000, 0x9999,
"Seagate",
--
2.17.1
From: Alan Stern <[email protected]>
[ Upstream commit c401e7b4a808d50ab53ef45cb8d0b99b238bf2c9 ]
The USB stack uses error code -ENOSPC to indicate that the periodic
schedule is too full, with insufficient bandwidth to accommodate a new
allocation. It uses -EFBIG to indicate that an isochronous transfer
could not be linked into the schedule because it would exceed the
number of isochronous packets the host controller driver can handle
(generally because the new transfer would extend too far into the
future).
ehci-hcd uses the wrong error code at one point. This patch fixes it,
along with a misleading comment and debugging message.
Signed-off-by: Alan Stern <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/usb/host/ehci-sched.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/usb/host/ehci-sched.c b/drivers/usb/host/ehci-sched.c
index c399606f154e..f9a332775c47 100644
--- a/drivers/usb/host/ehci-sched.c
+++ b/drivers/usb/host/ehci-sched.c
@@ -1604,11 +1604,11 @@ iso_stream_schedule (
*/
now2 = (now - base) & (mod - 1);
- /* Is the schedule already full? */
+ /* Is the schedule about to wrap around? */
if (unlikely(!empty && start < period)) {
- ehci_dbg(ehci, "iso sched full %p (%u-%u < %u mod %u)\n",
+ ehci_dbg(ehci, "request %p would overflow (%u-%u < %u mod %u)\n",
urb, stream->next_uframe, base, period, mod);
- status = -ENOSPC;
+ status = -EFBIG;
goto fail;
}
--
2.17.1
From: Abhilash Kesavan <[email protected]>
[ Upstream commit 25217fef355174209eff68c0eb438a8af5d7b01c ]
The arndale-octa board was giving "imprecise external aborts" during
boot-up with MCPM enabled. CCI enablement of the boot cluster was found
to be the cause of these aborts (possibly because the secure f/w was not
allowing it). Hence, disable CCI for the arndale-octa board.
Signed-off-by: Abhilash Kesavan <[email protected]>
Tested-by: Krzysztof Kozlowski <[email protected]>
Tested-by: Kevin Hilman <[email protected]>
Tested-by: Tyler Baker <[email protected]>
Signed-off-by: Olof Johansson <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm/boot/dts/exynos5420-arndale-octa.dts | 4 ++++
arch/arm/boot/dts/exynos5420.dtsi | 2 +-
2 files changed, 5 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/exynos5420-arndale-octa.dts b/arch/arm/boot/dts/exynos5420-arndale-octa.dts
index aa7a7d727a7e..db2c1c4cd900 100644
--- a/arch/arm/boot/dts/exynos5420-arndale-octa.dts
+++ b/arch/arm/boot/dts/exynos5420-arndale-octa.dts
@@ -372,3 +372,7 @@
&usbdrd_dwc3_1 {
dr_mode = "host";
};
+
+&cci {
+ status = "disabled";
+};
diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi
index 1353a092134f..9655a3efbd15 100644
--- a/arch/arm/boot/dts/exynos5420.dtsi
+++ b/arch/arm/boot/dts/exynos5420.dtsi
@@ -120,7 +120,7 @@
};
};
- cci@10d20000 {
+ cci: cci@10d20000 {
compatible = "arm,cci-400";
#address-cells = <1>;
#size-cells = <1>;
--
2.17.1
From: Trond Myklebust <[email protected]>
[ Upstream commit 4e379d36c050b0117b5d10048be63a44f5036115 ]
Remove an incorrect check for NFS_DELEGATION_NEED_RECLAIM in
can_open_delegated(). We are allowed to cache opens even in
a situation where we're doing reboot recovery.
Signed-off-by: Trond Myklebust <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/nfs/nfs4proc.c | 2 --
1 file changed, 2 deletions(-)
diff --git a/fs/nfs/nfs4proc.c b/fs/nfs/nfs4proc.c
index db8456b4ecb8..21906d2a13cc 100644
--- a/fs/nfs/nfs4proc.c
+++ b/fs/nfs/nfs4proc.c
@@ -1117,8 +1117,6 @@ static int can_open_delegated(struct nfs_delegation *delegation, fmode_t fmode)
return 0;
if ((delegation->type & fmode) != fmode)
return 0;
- if (test_bit(NFS_DELEGATION_NEED_RECLAIM, &delegation->flags))
- return 0;
if (test_bit(NFS_DELEGATION_RETURNING, &delegation->flags))
return 0;
nfs_mark_delegation_referenced(delegation);
--
2.17.1
From: Christoph Hellwig <[email protected]>
[ Upstream commit 70a0f2c1898c6abf53670e55642b6e840b003892 ]
The blk-mq ->queue_rq method is always called from process context,
but might have preemption disabled. This means we still always
have to use GFP_ATOMIC for memory allocations, and thus need to
revert part of commit 3c356bde1 ("scsi: stop passing a gfp_mask
argument down the command setup path").
Signed-off-by: Christoph Hellwig <[email protected]>
Reported-by: Sasha Levin <[email protected]>
Reviewed-by: Bart Van Assche <[email protected]>
Tested-by: Alexei Starovoitov <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/scsi/scsi_lib.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c
index a11837054d6c..0d5c218b7ad1 100644
--- a/drivers/scsi/scsi_lib.c
+++ b/drivers/scsi/scsi_lib.c
@@ -616,7 +616,7 @@ static int scsi_alloc_sgtable(struct scsi_data_buffer *sdb, int nents,
}
ret = __sg_alloc_table(&sdb->table, nents, SCSI_MAX_SG_SEGMENTS,
- first_chunk, gfp_mask, scsi_sg_alloc);
+ first_chunk, GFP_ATOMIC, scsi_sg_alloc);
if (unlikely(ret))
scsi_free_sgtable(sdb, mq);
return ret;
--
2.17.1
From: Chuck Lever <[email protected]>
[ Upstream commit 7a01edf0058df98d6cc734c5a4ecc51f929a86ec ]
Detect server trunking across transport protocols. Otherwise, an
RDMA mount and a TCP mount of the same server will end up with
separate nfs_clients using the same clientid4.
Reported-by: Dai Ngo <[email protected]>
Signed-off-by: Chuck Lever <[email protected]>
Signed-off-by: Trond Myklebust <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/nfs/nfs4client.c | 6 ------
1 file changed, 6 deletions(-)
diff --git a/fs/nfs/nfs4client.c b/fs/nfs/nfs4client.c
index a8a9be4c6cf4..eb8777eb4d2b 100644
--- a/fs/nfs/nfs4client.c
+++ b/fs/nfs/nfs4client.c
@@ -495,9 +495,6 @@ int nfs40_walk_client_list(struct nfs_client *new,
if (pos->rpc_ops != new->rpc_ops)
continue;
- if (pos->cl_proto != new->cl_proto)
- continue;
-
if (pos->cl_minorversion != new->cl_minorversion)
continue;
@@ -633,9 +630,6 @@ int nfs41_walk_client_list(struct nfs_client *new,
if (pos->rpc_ops != new->rpc_ops)
continue;
- if (pos->cl_proto != new->cl_proto)
- continue;
-
if (pos->cl_minorversion != new->cl_minorversion)
continue;
--
2.17.1
From: Vivek Gautam <[email protected]>
[ Upstream commit e93e54544adf3aa6908b821e896cb17a562cb683 ]
DP PHY now require pmu-system-controller to handle PMU register
to control PHY's power isolation. Adding the same to dp-phy
node.
Signed-off-by: Vivek Gautam <[email protected]>
Reviewed-by: Jingoo Han <[email protected]>
Tested-by: Javier Martinez Canillas <[email protected]>
Signed-off-by: Kukjin Kim <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm/boot/dts/exynos5250.dtsi | 2 +-
arch/arm/boot/dts/exynos5420.dtsi | 4 ++--
2 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi
index d55c1a2eb798..251226eefad7 100644
--- a/arch/arm/boot/dts/exynos5250.dtsi
+++ b/arch/arm/boot/dts/exynos5250.dtsi
@@ -732,7 +732,7 @@
dp_phy: video-phy@10040720 {
compatible = "samsung,exynos5250-dp-video-phy";
- reg = <0x10040720 4>;
+ samsung,pmu-syscon = <&pmu_system_controller>;
#phy-cells = <0>;
};
diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi
index 8617a031cbc0..1353a092134f 100644
--- a/arch/arm/boot/dts/exynos5420.dtsi
+++ b/arch/arm/boot/dts/exynos5420.dtsi
@@ -503,8 +503,8 @@
};
dp_phy: video-phy@10040728 {
- compatible = "samsung,exynos5250-dp-video-phy";
- reg = <0x10040728 4>;
+ compatible = "samsung,exynos5420-dp-video-phy";
+ samsung,pmu-syscon = <&pmu_system_controller>;
#phy-cells = <0>;
};
--
2.17.1
From: Abhilash Kesavan <[email protected]>
[ Upstream commit 896ddd600ba4a3426aeb11710ae9c28dd7ce68ce ]
The arm-cci driver completes the probe sequence even if the cci node is
marked as disabled. Add a check in the driver to honour the cci status
in the device tree.
Signed-off-by: Abhilash Kesavan <[email protected]>
Acked-by: Sudeep Holla <[email protected]>
Acked-by: Nicolas Pitre <[email protected]>
Tested-by: Sudeep Holla <[email protected]>
Tested-by: Kevin Hilman <[email protected]>
Signed-off-by: Olof Johansson <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/bus/arm-cci.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/bus/arm-cci.c b/drivers/bus/arm-cci.c
index 7af78df241f2..99cad3ac38f2 100644
--- a/drivers/bus/arm-cci.c
+++ b/drivers/bus/arm-cci.c
@@ -976,6 +976,9 @@ static int cci_probe(void)
if (!np)
return -ENODEV;
+ if (!of_device_is_available(np))
+ return -ENODEV;
+
cci_config = of_match_node(arm_cci_matches, np)->data;
if (!cci_config)
return -ENODEV;
--
2.17.1
From: Kan Liang <[email protected]>
[ Upstream commit 33636732dcd7cc738a5913bb730d663c6b03c8fb ]
cycles:p and cycles:pp do not work on SLM since commit:
86a04461a99f ("perf/x86: Revamp PEBS event selection")
UOPS_RETIRED.ALL is not a PEBS capable event, so it should not be used
to count cycle number.
Actually SLM calls intel_pebs_aliases_core2() which uses INST_RETIRED.ANY_P
to count the number of cycles. It's a PEBS capable event. But inv and
cmask must be set to count cycles.
Considering SLM allows all events as PEBS with no flags, only
INST_RETIRED.ANY_P, inv=1, cmask=16 needs to handled specially.
Signed-off-by: Kan Liang <[email protected]>
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Cc: Arnaldo Carvalho de Melo <[email protected]>
Cc: Linus Torvalds <[email protected]>
Signed-off-by: Ingo Molnar <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/x86/kernel/cpu/perf_event_intel_ds.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/x86/kernel/cpu/perf_event_intel_ds.c b/arch/x86/kernel/cpu/perf_event_intel_ds.c
index 46211bcc813e..423cbd9bea3e 100644
--- a/arch/x86/kernel/cpu/perf_event_intel_ds.c
+++ b/arch/x86/kernel/cpu/perf_event_intel_ds.c
@@ -568,8 +568,8 @@ struct event_constraint intel_atom_pebs_event_constraints[] = {
};
struct event_constraint intel_slm_pebs_event_constraints[] = {
- /* UOPS_RETIRED.ALL, inv=1, cmask=16 (cycles:p). */
- INTEL_FLAGS_EVENT_CONSTRAINT(0x108001c2, 0xf),
+ /* INST_RETIRED.ANY_P, inv=1, cmask=16 (cycles:p). */
+ INTEL_FLAGS_EVENT_CONSTRAINT(0x108000c0, 0x1),
/* Allow all events as PEBS with no flags */
INTEL_ALL_EVENT_CONSTRAINT(0, 0x1),
EVENT_CONSTRAINT_END
--
2.17.1
From: Trond Myklebust <[email protected]>
[ Upstream commit 55b9df93ddd684cbc4c2dee9b8a99f6e48348212 ]
While we normally expect the NFSv4 client to always send the same client
owner to all servers, there are a couple of situations where that is not
the case:
1) In NFSv4.0, switching between use of '-omigration' and not will cause
the kernel to switch between using the non-uniform and uniform client
strings.
2) In NFSv4.1, or NFSv4.0 when using uniform client strings, if the
uniquifier string is suddenly changed.
This patch will catch those situations by checking the client owner id
in the trunking detection code, and will do the right thing if it notices
that the strings differ.
Cc: Chuck Lever <[email protected]>
Signed-off-by: Trond Myklebust <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/nfs/nfs4client.c | 18 ++++++++++++++++++
1 file changed, 18 insertions(+)
diff --git a/fs/nfs/nfs4client.c b/fs/nfs/nfs4client.c
index d748d403bab1..a8a9be4c6cf4 100644
--- a/fs/nfs/nfs4client.c
+++ b/fs/nfs/nfs4client.c
@@ -456,6 +456,14 @@ static void nfs4_swap_callback_idents(struct nfs_client *keep,
spin_unlock(&nn->nfs_client_lock);
}
+static bool nfs4_match_client_owner_id(const struct nfs_client *clp1,
+ const struct nfs_client *clp2)
+{
+ if (clp1->cl_owner_id == NULL || clp2->cl_owner_id == NULL)
+ return true;
+ return strcmp(clp1->cl_owner_id, clp2->cl_owner_id) == 0;
+}
+
/**
* nfs40_walk_client_list - Find server that recognizes a client ID
*
@@ -515,6 +523,9 @@ int nfs40_walk_client_list(struct nfs_client *new,
if (pos->cl_clientid != new->cl_clientid)
continue;
+ if (!nfs4_match_client_owner_id(pos, new))
+ continue;
+
atomic_inc(&pos->cl_count);
spin_unlock(&nn->nfs_client_lock);
@@ -664,6 +675,13 @@ int nfs41_walk_client_list(struct nfs_client *new,
if (!nfs4_check_clientid_trunking(pos, new))
continue;
+ /* Unlike NFSv4.0, we know that NFSv4.1 always uses the
+ * uniform string, however someone might switch the
+ * uniquifier string on us.
+ */
+ if (!nfs4_match_client_owner_id(pos, new))
+ continue;
+
atomic_inc(&pos->cl_count);
*result = pos;
status = 0;
--
2.17.1
From: Stephane Eranian <[email protected]>
[ Upstream commit 433678bdc6ed39f053c55da96b51de5bf0aeebb1 ]
This patch fixes a problem with the initialization of the
sysfs_show() routine for the RAPL PMU.
The current code was wrongly relying on the EVENT_ATTR_STR()
macro which uses the events_sysfs_show() function in the x86
PMU code. That function itself was relying on the x86_pmu data
structure. Yet RAPL and the core PMU (x86_pmu) have nothing to
do with each other. They should therefore not interact with
each other.
The x86_pmu structure is initialized at boot time based on
the host CPU model. When the host CPU is not supported, the
x86_pmu remains uninitialized and some of the callbacks it
contains are NULL.
The false dependency with x86_pmu could potentially cause crashes
in case the x86_pmu is not initialized while the RAPL PMU is. This
may, for instance, be the case in virtualized environments.
This patch fixes the problem by using a private sysfs_show()
routine for exporting the RAPL PMU events.
Signed-off-by: Stephane Eranian <[email protected]>
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Link: http://lkml.kernel.org/r/20150113225953.GA21525@thinkpad
Cc: [email protected]
Cc: [email protected]
Cc: Arnaldo Carvalho de Melo <[email protected]>
Cc: Linus Torvalds <[email protected]>
Signed-off-by: Ingo Molnar <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/x86/kernel/cpu/perf_event_intel_rapl.c | 44 +++++++++++++++------
1 file changed, 32 insertions(+), 12 deletions(-)
diff --git a/arch/x86/kernel/cpu/perf_event_intel_rapl.c b/arch/x86/kernel/cpu/perf_event_intel_rapl.c
index 611d821eac1a..040915c87cb6 100644
--- a/arch/x86/kernel/cpu/perf_event_intel_rapl.c
+++ b/arch/x86/kernel/cpu/perf_event_intel_rapl.c
@@ -103,6 +103,13 @@ static struct kobj_attribute format_attr_##_var = \
#define RAPL_CNTR_WIDTH 32 /* 32-bit rapl counters */
+#define RAPL_EVENT_ATTR_STR(_name, v, str) \
+static struct perf_pmu_events_attr event_attr_##v = { \
+ .attr = __ATTR(_name, 0444, rapl_sysfs_show, NULL), \
+ .id = 0, \
+ .event_str = str, \
+};
+
struct rapl_pmu {
spinlock_t lock;
int hw_unit; /* 1/2^hw_unit Joule */
@@ -383,23 +390,36 @@ static struct attribute_group rapl_pmu_attr_group = {
.attrs = rapl_pmu_attrs,
};
-EVENT_ATTR_STR(energy-cores, rapl_cores, "event=0x01");
-EVENT_ATTR_STR(energy-pkg , rapl_pkg, "event=0x02");
-EVENT_ATTR_STR(energy-ram , rapl_ram, "event=0x03");
-EVENT_ATTR_STR(energy-gpu , rapl_gpu, "event=0x04");
+static ssize_t rapl_sysfs_show(struct device *dev,
+ struct device_attribute *attr,
+ char *page)
+{
+ struct perf_pmu_events_attr *pmu_attr = \
+ container_of(attr, struct perf_pmu_events_attr, attr);
+
+ if (pmu_attr->event_str)
+ return sprintf(page, "%s", pmu_attr->event_str);
+
+ return 0;
+}
+
+RAPL_EVENT_ATTR_STR(energy-cores, rapl_cores, "event=0x01");
+RAPL_EVENT_ATTR_STR(energy-pkg , rapl_pkg, "event=0x02");
+RAPL_EVENT_ATTR_STR(energy-ram , rapl_ram, "event=0x03");
+RAPL_EVENT_ATTR_STR(energy-gpu , rapl_gpu, "event=0x04");
-EVENT_ATTR_STR(energy-cores.unit, rapl_cores_unit, "Joules");
-EVENT_ATTR_STR(energy-pkg.unit , rapl_pkg_unit, "Joules");
-EVENT_ATTR_STR(energy-ram.unit , rapl_ram_unit, "Joules");
-EVENT_ATTR_STR(energy-gpu.unit , rapl_gpu_unit, "Joules");
+RAPL_EVENT_ATTR_STR(energy-cores.unit, rapl_cores_unit, "Joules");
+RAPL_EVENT_ATTR_STR(energy-pkg.unit , rapl_pkg_unit, "Joules");
+RAPL_EVENT_ATTR_STR(energy-ram.unit , rapl_ram_unit, "Joules");
+RAPL_EVENT_ATTR_STR(energy-gpu.unit , rapl_gpu_unit, "Joules");
/*
* we compute in 0.23 nJ increments regardless of MSR
*/
-EVENT_ATTR_STR(energy-cores.scale, rapl_cores_scale, "2.3283064365386962890625e-10");
-EVENT_ATTR_STR(energy-pkg.scale, rapl_pkg_scale, "2.3283064365386962890625e-10");
-EVENT_ATTR_STR(energy-ram.scale, rapl_ram_scale, "2.3283064365386962890625e-10");
-EVENT_ATTR_STR(energy-gpu.scale, rapl_gpu_scale, "2.3283064365386962890625e-10");
+RAPL_EVENT_ATTR_STR(energy-cores.scale, rapl_cores_scale, "2.3283064365386962890625e-10");
+RAPL_EVENT_ATTR_STR(energy-pkg.scale, rapl_pkg_scale, "2.3283064365386962890625e-10");
+RAPL_EVENT_ATTR_STR(energy-ram.scale, rapl_ram_scale, "2.3283064365386962890625e-10");
+RAPL_EVENT_ATTR_STR(energy-gpu.scale, rapl_gpu_scale, "2.3283064365386962890625e-10");
static struct attribute *rapl_events_srv_attr[] = {
EVENT_PTR(rapl_cores),
--
2.17.1
From: Tony Lindgren <[email protected]>
[ Upstream commit 71c4f6027da75c6c1fd92e05b63108a09ec2b109 ]
N900 legacy user space apps need the board name in
/proc/cpuinfo to work properly for the Hardware entry.
For other boards this should not be an issues and they
can use the generic Hardware entry.
Let's fix the issue by adding a custom DT_MACHINE_START
for n900.
Tested-by: Pali Rohár <[email protected]>
Acked-by: Pavel Machek <[email protected]>
Signed-off-by: Tony Lindgren <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm/mach-omap2/board-generic.c | 18 ++++++++++++++++++
1 file changed, 18 insertions(+)
diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c
index 608079a1aba6..b61c049f92d6 100644
--- a/arch/arm/mach-omap2/board-generic.c
+++ b/arch/arm/mach-omap2/board-generic.c
@@ -77,6 +77,24 @@ MACHINE_END
#endif
#ifdef CONFIG_ARCH_OMAP3
+/* Some boards need board name for legacy userspace in /proc/cpuinfo */
+static const char *const n900_boards_compat[] __initconst = {
+ "nokia,omap3-n900",
+ NULL,
+};
+
+DT_MACHINE_START(OMAP3_N900_DT, "Nokia RX-51 board")
+ .reserve = omap_reserve,
+ .map_io = omap3_map_io,
+ .init_early = omap3430_init_early,
+ .init_machine = omap_generic_init,
+ .init_late = omap3_init_late,
+ .init_time = omap3_sync32k_timer_init,
+ .dt_compat = n900_boards_compat,
+ .restart = omap3xxx_restart,
+MACHINE_END
+
+/* Generic omap3 boards, most boards can use these */
static const char *const omap3_boards_compat[] __initconst = {
"ti,omap3430",
"ti,omap3",
--
2.17.1
From: Chanwoo Choi <[email protected]>
[ Upstream commit 31ec77aca72ee5920ed3ec3d047734dc0bc43342 ]
This patch adds new s3c24xx_serial_drv_data structure for Exynos5433 SoC
because Exynos5433 has different fifo size from existing Exynos4 SoC.
Cc: Greg Kroah-Hartman <[email protected]>
Cc: Jiri Slaby <[email protected]>
Cc: [email protected]
Signed-off-by: Chanwoo Choi <[email protected]>
Acked-by: Inki Dae <[email protected]>
Acked-by: Geunsik Lim <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/tty/serial/samsung.c | 56 +++++++++++++++++++++++-------------
1 file changed, 36 insertions(+), 20 deletions(-)
diff --git a/drivers/tty/serial/samsung.c b/drivers/tty/serial/samsung.c
index ba59a76edc8b..957992ceba0a 100644
--- a/drivers/tty/serial/samsung.c
+++ b/drivers/tty/serial/samsung.c
@@ -1785,32 +1785,43 @@ static struct s3c24xx_serial_drv_data s5pv210_serial_drv_data = {
#endif
#if defined(CONFIG_ARCH_EXYNOS)
+#define EXYNOS_COMMON_SERIAL_DRV_DATA \
+ .info = &(struct s3c24xx_uart_info) { \
+ .name = "Samsung Exynos UART", \
+ .type = PORT_S3C6400, \
+ .has_divslot = 1, \
+ .rx_fifomask = S5PV210_UFSTAT_RXMASK, \
+ .rx_fifoshift = S5PV210_UFSTAT_RXSHIFT, \
+ .rx_fifofull = S5PV210_UFSTAT_RXFULL, \
+ .tx_fifofull = S5PV210_UFSTAT_TXFULL, \
+ .tx_fifomask = S5PV210_UFSTAT_TXMASK, \
+ .tx_fifoshift = S5PV210_UFSTAT_TXSHIFT, \
+ .def_clk_sel = S3C2410_UCON_CLKSEL0, \
+ .num_clks = 1, \
+ .clksel_mask = 0, \
+ .clksel_shift = 0, \
+ }, \
+ .def_cfg = &(struct s3c2410_uartcfg) { \
+ .ucon = S5PV210_UCON_DEFAULT, \
+ .ufcon = S5PV210_UFCON_DEFAULT, \
+ .has_fracval = 1, \
+ } \
+
static struct s3c24xx_serial_drv_data exynos4210_serial_drv_data = {
- .info = &(struct s3c24xx_uart_info) {
- .name = "Samsung Exynos4 UART",
- .type = PORT_S3C6400,
- .has_divslot = 1,
- .rx_fifomask = S5PV210_UFSTAT_RXMASK,
- .rx_fifoshift = S5PV210_UFSTAT_RXSHIFT,
- .rx_fifofull = S5PV210_UFSTAT_RXFULL,
- .tx_fifofull = S5PV210_UFSTAT_TXFULL,
- .tx_fifomask = S5PV210_UFSTAT_TXMASK,
- .tx_fifoshift = S5PV210_UFSTAT_TXSHIFT,
- .def_clk_sel = S3C2410_UCON_CLKSEL0,
- .num_clks = 1,
- .clksel_mask = 0,
- .clksel_shift = 0,
- },
- .def_cfg = &(struct s3c2410_uartcfg) {
- .ucon = S5PV210_UCON_DEFAULT,
- .ufcon = S5PV210_UFCON_DEFAULT,
- .has_fracval = 1,
- },
+ EXYNOS_COMMON_SERIAL_DRV_DATA,
.fifosize = { 256, 64, 16, 16 },
};
+
+static struct s3c24xx_serial_drv_data exynos5433_serial_drv_data = {
+ EXYNOS_COMMON_SERIAL_DRV_DATA,
+ .fifosize = { 64, 256, 16, 256 },
+};
+
#define EXYNOS4210_SERIAL_DRV_DATA ((kernel_ulong_t)&exynos4210_serial_drv_data)
+#define EXYNOS5433_SERIAL_DRV_DATA ((kernel_ulong_t)&exynos5433_serial_drv_data)
#else
#define EXYNOS4210_SERIAL_DRV_DATA (kernel_ulong_t)NULL
+#define EXYNOS5433_SERIAL_DRV_DATA (kernel_ulong_t)NULL
#endif
static struct platform_device_id s3c24xx_serial_driver_ids[] = {
@@ -1832,6 +1843,9 @@ static struct platform_device_id s3c24xx_serial_driver_ids[] = {
}, {
.name = "exynos4210-uart",
.driver_data = EXYNOS4210_SERIAL_DRV_DATA,
+ }, {
+ .name = "exynos5433-uart",
+ .driver_data = EXYNOS5433_SERIAL_DRV_DATA,
},
{ },
};
@@ -1851,6 +1865,8 @@ static const struct of_device_id s3c24xx_uart_dt_match[] = {
.data = (void *)S5PV210_SERIAL_DRV_DATA },
{ .compatible = "samsung,exynos4210-uart",
.data = (void *)EXYNOS4210_SERIAL_DRV_DATA },
+ { .compatible = "samsung,exynos5433-uart",
+ .data = (void *)EXYNOS5433_SERIAL_DRV_DATA },
{},
};
MODULE_DEVICE_TABLE(of, s3c24xx_uart_dt_match);
--
2.17.1
From: Tony Lindgren <[email protected]>
[ Upstream commit c0442479652b99b62dd1ffccb34231caff25751c ]
Commit 82c02f58ba3a ("usb: musb: Allow multiple glue layers to be
built in") enabled selecting multiple glue layers, which in turn
exposed things more for randconfig builds. If NOP_USB_XCEIV is
built-in and TUSB6010 is a loadable module, we will get:
drivers/built-in.o: In function `tusb_remove':
tusb6010.c:(.text+0x16a817): undefined reference to `usb_phy_generic_unregister'
drivers/built-in.o: In function `tusb_probe':
tusb6010.c:(.text+0x16b24e): undefined reference to `usb_phy_generic_register'
make: *** [vmlinux] Error 1
Let's fix this the same way as commit 70c1ff4b3c86 ("usb: musb:
tusb-dma can't be built-in if tusb is not").
And while at it, let's not allow selecting the glue layers except
on platforms really using them unless COMPILE_TEST is specified:
- TUSB6010 is in practise only used on omaps
- DSPS is only used on TI platforms
- UX500 is only used on STE platforms
Cc: Linus Walleij <[email protected]>
Reported-by: Jim Davis <[email protected]>
Signed-off-by: Tony Lindgren <[email protected]>
Signed-off-by: Felipe Balbi <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/usb/musb/Kconfig | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/drivers/usb/musb/Kconfig b/drivers/usb/musb/Kconfig
index dbc56eb5eee4..5ab24cd38f37 100644
--- a/drivers/usb/musb/Kconfig
+++ b/drivers/usb/musb/Kconfig
@@ -73,6 +73,8 @@ config USB_MUSB_DA8XX
config USB_MUSB_TUSB6010
tristate "TUSB6010"
+ depends on ARCH_OMAP2PLUS || COMPILE_TEST
+ depends on NOP_USB_XCEIV = USB_MUSB_HDRC # both built-in or both modules
config USB_MUSB_OMAP2PLUS
tristate "OMAP2430 and onwards"
@@ -86,6 +88,7 @@ config USB_MUSB_AM35X
config USB_MUSB_DSPS
tristate "TI DSPS platforms"
select USB_MUSB_AM335X_CHILD
+ depends on ARCH_OMAP2PLUS || COMPILE_TEST
depends on OF_IRQ
config USB_MUSB_BLACKFIN
@@ -94,6 +97,7 @@ config USB_MUSB_BLACKFIN
config USB_MUSB_UX500
tristate "Ux500 platforms"
+ depends on ARCH_U8500 || COMPILE_TEST
config USB_MUSB_JZ4740
tristate "JZ4740"
--
2.17.1
From: Trond Myklebust <[email protected]>
[ Upstream commit ceb3a16c070c403f5f9ca46b46cf2bb79ea11750 ]
Ensure that we cache the NFSv4/v4.1 client owner_id so that we can
verify it when we're doing trunking detection.
Signed-off-by: Trond Myklebust <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/nfs/nfs4client.c | 1 +
fs/nfs/nfs4proc.c | 19 +++++++++++++++----
include/linux/nfs_fs_sb.h | 3 +++
3 files changed, 19 insertions(+), 4 deletions(-)
diff --git a/fs/nfs/nfs4client.c b/fs/nfs/nfs4client.c
index 723c656ebd28..d748d403bab1 100644
--- a/fs/nfs/nfs4client.c
+++ b/fs/nfs/nfs4client.c
@@ -228,6 +228,7 @@ static void nfs4_shutdown_client(struct nfs_client *clp)
kfree(clp->cl_serverowner);
kfree(clp->cl_serverscope);
kfree(clp->cl_implid);
+ kfree(clp->cl_owner_id);
}
void nfs4_free_client(struct nfs_client *clp)
diff --git a/fs/nfs/nfs4proc.c b/fs/nfs/nfs4proc.c
index 321044c183f5..db8456b4ecb8 100644
--- a/fs/nfs/nfs4proc.c
+++ b/fs/nfs/nfs4proc.c
@@ -4913,11 +4913,14 @@ static void nfs4_init_boot_verifier(const struct nfs_client *clp,
}
static unsigned int
-nfs4_init_nonuniform_client_string(const struct nfs_client *clp,
+nfs4_init_nonuniform_client_string(struct nfs_client *clp,
char *buf, size_t len)
{
unsigned int result;
+ if (clp->cl_owner_id != NULL)
+ return strlcpy(buf, clp->cl_owner_id, len);
+
rcu_read_lock();
result = scnprintf(buf, len, "Linux NFSv4.0 %s/%s %s",
clp->cl_ipaddr,
@@ -4926,24 +4929,32 @@ nfs4_init_nonuniform_client_string(const struct nfs_client *clp,
rpc_peeraddr2str(clp->cl_rpcclient,
RPC_DISPLAY_PROTO));
rcu_read_unlock();
+ clp->cl_owner_id = kstrdup(buf, GFP_KERNEL);
return result;
}
static unsigned int
-nfs4_init_uniform_client_string(const struct nfs_client *clp,
+nfs4_init_uniform_client_string(struct nfs_client *clp,
char *buf, size_t len)
{
const char *nodename = clp->cl_rpcclient->cl_nodename;
+ unsigned int result;
+
+ if (clp->cl_owner_id != NULL)
+ return strlcpy(buf, clp->cl_owner_id, len);
if (nfs4_client_id_uniquifier[0] != '\0')
- return scnprintf(buf, len, "Linux NFSv%u.%u %s/%s",
+ result = scnprintf(buf, len, "Linux NFSv%u.%u %s/%s",
clp->rpc_ops->version,
clp->cl_minorversion,
nfs4_client_id_uniquifier,
nodename);
- return scnprintf(buf, len, "Linux NFSv%u.%u %s",
+ else
+ result = scnprintf(buf, len, "Linux NFSv%u.%u %s",
clp->rpc_ops->version, clp->cl_minorversion,
nodename);
+ clp->cl_owner_id = kstrdup(buf, GFP_KERNEL);
+ return result;
}
/*
diff --git a/include/linux/nfs_fs_sb.h b/include/linux/nfs_fs_sb.h
index fd249ab2718f..4ac99c07406a 100644
--- a/include/linux/nfs_fs_sb.h
+++ b/include/linux/nfs_fs_sb.h
@@ -74,6 +74,9 @@ struct nfs_client {
/* idmapper */
struct idmap * cl_idmap;
+ /* Client owner identifier */
+ const char * cl_owner_id;
+
/* Our own IP address, as a null-terminated string.
* This is used to generate the mv0 callback address.
*/
--
2.17.1
From: Vignesh R <[email protected]>
[ Upstream commit 0bc09f9cdc589e0b54724096138996a00b19babb ]
Prior to DRA74x silicon rev 1.1, pcie_pcs register bits 8-15 and bits 16-23
were used to configure RC delay count for phy1 and phy2 respectively.
phyid was used as index to distinguish the phys and to configure the delay
values appropriately.
As of DRA74x silicon rev 1.1, pcie_pcs register definition has changed.
Bits 16-23 are used to configure delay values for *both* phy1 and phy2.
Hence phyid is no longer required.
So, drop id field from ti_pipe3 structure and its subsequent references
for configuring pcie_pcs register.
Also, pcie_pcs register now needs to be configured with delay value of 0x96
at bit positions 16-23. See register description of CTRL_CORE_PCIE_PCS in
ARM572x TRM, SPRUHZ6, October 2014, section 18.5.2.2, table 18-1804.
This is needed to ensure Gen2 cards are enumerated consistently.
DRA72x silicon behaves same way as DRA74x rev 1.1 as far as this functionality
is considered.
Test results on DRA74x and DRA72x EVMs:
Before patch
------------
DRA74x ES 1.0: Gen1 cards work, Gen2 cards do not work (expected result due to
silicon errata)
DRA74x ES 1.1: Gen1 cards work, Gen2 cards do not work sometimes due to incorrect
programming of register
DRA72x: Gen1 cards work, Gen2 cards do not work sometimes due to incorrect
programming of register
After patch
-----------
DRA74x ES 1.0: Gen1 cards work, Gen2 cards do not work (expected result due to
silicon errata)
DRA74x ES 1.1: Gen1 cards work, Gen2 cards work consistently.
DRA72x: Gen1 and Gen2 cards enumerate consistently.
Signed-off-by: Vignesh R <[email protected]>
Signed-off-by: Kishon Vijay Abraham I <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/phy/phy-omap-control.c | 7 +++----
drivers/phy/phy-ti-pipe3.c | 10 ++++++----
include/linux/phy/omap_control_phy.h | 6 +++---
3 files changed, 12 insertions(+), 11 deletions(-)
diff --git a/drivers/phy/phy-omap-control.c b/drivers/phy/phy-omap-control.c
index c96e8183a8ff..efe724f97e02 100644
--- a/drivers/phy/phy-omap-control.c
+++ b/drivers/phy/phy-omap-control.c
@@ -29,10 +29,9 @@
/**
* omap_control_pcie_pcs - set the PCS delay count
* @dev: the control module device
- * @id: index of the pcie PHY (should be 1 or 2)
* @delay: 8 bit delay value
*/
-void omap_control_pcie_pcs(struct device *dev, u8 id, u8 delay)
+void omap_control_pcie_pcs(struct device *dev, u8 delay)
{
u32 val;
struct omap_control_phy *control_phy;
@@ -55,8 +54,8 @@ void omap_control_pcie_pcs(struct device *dev, u8 id, u8 delay)
val = readl(control_phy->pcie_pcs);
val &= ~(OMAP_CTRL_PCIE_PCS_MASK <<
- (id * OMAP_CTRL_PCIE_PCS_DELAY_COUNT_SHIFT));
- val |= delay << (id * OMAP_CTRL_PCIE_PCS_DELAY_COUNT_SHIFT);
+ OMAP_CTRL_PCIE_PCS_DELAY_COUNT_SHIFT);
+ val |= (delay << OMAP_CTRL_PCIE_PCS_DELAY_COUNT_SHIFT);
writel(val, control_phy->pcie_pcs);
}
EXPORT_SYMBOL_GPL(omap_control_pcie_pcs);
diff --git a/drivers/phy/phy-ti-pipe3.c b/drivers/phy/phy-ti-pipe3.c
index ab1e22d9a1e8..fd92fc64f5da 100644
--- a/drivers/phy/phy-ti-pipe3.c
+++ b/drivers/phy/phy-ti-pipe3.c
@@ -82,7 +82,6 @@ struct ti_pipe3 {
struct clk *refclk;
struct clk *div_clk;
struct pipe3_dpll_map *dpll_map;
- u8 id;
};
static struct pipe3_dpll_map dpll_map_usb[] = {
@@ -217,8 +216,13 @@ static int ti_pipe3_init(struct phy *x)
u32 val;
int ret = 0;
+ /*
+ * Set pcie_pcs register to 0x96 for proper functioning of phy
+ * as recommended in AM572x TRM SPRUHZ6, section 18.5.2.2, table
+ * 18-1804.
+ */
if (of_device_is_compatible(phy->dev->of_node, "ti,phy-pipe3-pcie")) {
- omap_control_pcie_pcs(phy->control_dev, phy->id, 0xF1);
+ omap_control_pcie_pcs(phy->control_dev, 0x96);
return 0;
}
@@ -347,8 +351,6 @@ static int ti_pipe3_probe(struct platform_device *pdev)
}
if (of_device_is_compatible(node, "ti,phy-pipe3-pcie")) {
- if (of_property_read_u8(node, "id", &phy->id) < 0)
- phy->id = 1;
clk = devm_clk_get(phy->dev, "dpll_ref");
if (IS_ERR(clk)) {
diff --git a/include/linux/phy/omap_control_phy.h b/include/linux/phy/omap_control_phy.h
index e9e6cfbfbb58..eb7d4a135a9e 100644
--- a/include/linux/phy/omap_control_phy.h
+++ b/include/linux/phy/omap_control_phy.h
@@ -66,7 +66,7 @@ enum omap_control_usb_mode {
#define OMAP_CTRL_PIPE3_PHY_TX_RX_POWEROFF 0x0
#define OMAP_CTRL_PCIE_PCS_MASK 0xff
-#define OMAP_CTRL_PCIE_PCS_DELAY_COUNT_SHIFT 0x8
+#define OMAP_CTRL_PCIE_PCS_DELAY_COUNT_SHIFT 16
#define OMAP_CTRL_USB2_PHY_PD BIT(28)
@@ -79,7 +79,7 @@ enum omap_control_usb_mode {
void omap_control_phy_power(struct device *dev, int on);
void omap_control_usb_set_mode(struct device *dev,
enum omap_control_usb_mode mode);
-void omap_control_pcie_pcs(struct device *dev, u8 id, u8 delay);
+void omap_control_pcie_pcs(struct device *dev, u8 delay);
#else
static inline void omap_control_phy_power(struct device *dev, int on)
@@ -91,7 +91,7 @@ static inline void omap_control_usb_set_mode(struct device *dev,
{
}
-static inline void omap_control_pcie_pcs(struct device *dev, u8 id, u8 delay)
+static inline void omap_control_pcie_pcs(struct device *dev, u8 delay)
{
}
#endif
--
2.17.1
From: Jeremiah Mahler <[email protected]>
[ Upstream commit 04f9c6e6d17584340fb6c8a9469a0e6df28876d2 ]
If a USB serial device (e.g. /dev/ttyUSB0) with an active program is
unplugged, an -ENODEV (19) error will be produced after it gives up
trying to resubmit a read.
usb_serial_generic_submit_read_urb - usb_submit_urb failed: -19
Add -ENODEV as one of the permanent errors along with -EPERM that
usb_serial_generic_submit_read_urb() handles quietly without an error.
Signed-off-by: Jeremiah Mahler <[email protected]>
Signed-off-by: Johan Hovold <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/usb/serial/generic.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/usb/serial/generic.c b/drivers/usb/serial/generic.c
index c44b911937e8..54e170dd3dad 100644
--- a/drivers/usb/serial/generic.c
+++ b/drivers/usb/serial/generic.c
@@ -287,7 +287,7 @@ static int usb_serial_generic_submit_read_urb(struct usb_serial_port *port,
res = usb_submit_urb(port->read_urbs[index], mem_flags);
if (res) {
- if (res != -EPERM) {
+ if (res != -EPERM && res != -ENODEV) {
dev_err(&port->dev,
"%s - usb_submit_urb failed: %d\n",
__func__, res);
--
2.17.1
From: Fabien Proriol <[email protected]>
[ Upstream commit 65de7654d39c70c2b942f801cea01590cf7e3458 ]
When xilinx-xadc is used with hwmon driver to read voltage, offset used
for temperature is always applied whatever the channel.
iio_channel_read must return an error to avoid offset for channel
without IIO_CHAN_INFO_OFFSET property.
Signed-off-by: Fabien Proriol <[email protected]>
Signed-off-by: Jonathan Cameron <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/iio/inkern.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/iio/inkern.c b/drivers/iio/inkern.c
index f0846108d006..d33590e89337 100644
--- a/drivers/iio/inkern.c
+++ b/drivers/iio/inkern.c
@@ -426,6 +426,9 @@ static int iio_channel_read(struct iio_channel *chan, int *val, int *val2,
if (val2 == NULL)
val2 = &unused;
+ if(!iio_channel_has_info(chan->channel, info))
+ return -EINVAL;
+
if (chan->indio_dev->info->read_raw_multi) {
ret = chan->indio_dev->info->read_raw_multi(chan->indio_dev,
chan->channel, INDIO_MAX_RAW_ELEMENTS,
--
2.17.1
From: Hans de Goede <[email protected]>
[ Upstream commit 372400344afb60e275a271f3f5ccce17af0e45cb ]
The allwinner SDK uses a value of 3 for the disconnect threshold setting on
sun6i, do the same in the kernel.
In my previous experience with sun5i problems getting the threshold right
is important to avoid usb2 devices being unplugged sometimes going unnoticed.
Signed-off-by: Hans de Goede <[email protected]>
Signed-off-by: Kishon Vijay Abraham I <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/phy/phy-sun4i-usb.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/phy/phy-sun4i-usb.c b/drivers/phy/phy-sun4i-usb.c
index 0baf5efc8a40..1a2b045d6a67 100644
--- a/drivers/phy/phy-sun4i-usb.c
+++ b/drivers/phy/phy-sun4i-usb.c
@@ -240,7 +240,8 @@ static int sun4i_usb_phy_probe(struct platform_device *pdev)
else
data->num_phys = 3;
- if (of_device_is_compatible(np, "allwinner,sun4i-a10-usb-phy"))
+ if (of_device_is_compatible(np, "allwinner,sun4i-a10-usb-phy") ||
+ of_device_is_compatible(np, "allwinner,sun6i-a31-usb-phy"))
data->disc_thresh = 3;
else
data->disc_thresh = 2;
--
2.17.1
From: Rasmus Villemoes <[email protected]>
[ Upstream commit e87c3f80ad0490d26ffe04754b7d094463b40f30 ]
!strncmp(buf, "force host", 9) is true if and only if buf starts with
"force hos". This was obviously not what was intended. The same error
exists for "force full-speed", "force high-speed" and "test
packet". Using strstarts avoids the error-prone hardcoding of the
prefix length.
For consistency, also change the other occurences of the !strncmp
idiom.
Signed-off-by: Rasmus Villemoes <[email protected]>
Signed-off-by: Felipe Balbi <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/usb/musb/musb_cppi41.c | 4 ++--
drivers/usb/musb/musb_debugfs.c | 16 ++++++++--------
2 files changed, 10 insertions(+), 10 deletions(-)
diff --git a/drivers/usb/musb/musb_cppi41.c b/drivers/usb/musb/musb_cppi41.c
index 2a535b70af21..3d69971156ea 100644
--- a/drivers/usb/musb/musb_cppi41.c
+++ b/drivers/usb/musb/musb_cppi41.c
@@ -629,9 +629,9 @@ static int cppi41_dma_controller_start(struct cppi41_dma_controller *controller)
ret = of_property_read_string_index(np, "dma-names", i, &str);
if (ret)
goto err;
- if (!strncmp(str, "tx", 2))
+ if (strstarts(str, "tx"))
is_tx = 1;
- else if (!strncmp(str, "rx", 2))
+ else if (strstarts(str, "rx"))
is_tx = 0;
else {
dev_err(dev, "Wrong dmatype %s\n", str);
diff --git a/drivers/usb/musb/musb_debugfs.c b/drivers/usb/musb/musb_debugfs.c
index 4c216790e86b..05d1b203f0d0 100644
--- a/drivers/usb/musb/musb_debugfs.c
+++ b/drivers/usb/musb/musb_debugfs.c
@@ -194,30 +194,30 @@ static ssize_t musb_test_mode_write(struct file *file,
if (copy_from_user(&buf, ubuf, min_t(size_t, sizeof(buf) - 1, count)))
return -EFAULT;
- if (!strncmp(buf, "force host", 9))
+ if (strstarts(buf, "force host"))
test = MUSB_TEST_FORCE_HOST;
- if (!strncmp(buf, "fifo access", 11))
+ if (strstarts(buf, "fifo access"))
test = MUSB_TEST_FIFO_ACCESS;
- if (!strncmp(buf, "force full-speed", 15))
+ if (strstarts(buf, "force full-speed"))
test = MUSB_TEST_FORCE_FS;
- if (!strncmp(buf, "force high-speed", 15))
+ if (strstarts(buf, "force high-speed"))
test = MUSB_TEST_FORCE_HS;
- if (!strncmp(buf, "test packet", 10)) {
+ if (strstarts(buf, "test packet")) {
test = MUSB_TEST_PACKET;
musb_load_testpacket(musb);
}
- if (!strncmp(buf, "test K", 6))
+ if (strstarts(buf, "test K"))
test = MUSB_TEST_K;
- if (!strncmp(buf, "test J", 6))
+ if (strstarts(buf, "test J"))
test = MUSB_TEST_J;
- if (!strncmp(buf, "test SE0 NAK", 12))
+ if (strstarts(buf, "test SE0 NAK"))
test = MUSB_TEST_SE0_NAK;
musb_writeb(musb->mregs, MUSB_TESTMODE, test);
--
2.17.1
From: Peter Chen <[email protected]>
[ Upstream commit 4fde6204df052bb89ba3d915ed6ed9f306f3cfa1 ]
At f_audio_free_inst, it tries to access struct gaudio *card which is
freed at f_audio_free, it causes below oops if the audio device is not
there (do unload module may trigger the same problem). The gaudio_cleanup
is related to function, so it is better move to f_audio_free.
root@freescale ~$ modprobe g_audio
[ 751.968931] g_audio gadget: unable to open sound control device file: /dev/snd/controlC0
[ 751.977134] g_audio gadget: we need at least one control device
[ 751.988633] Unable to handle kernel paging request at virtual address 455f448e
[ 751.995963] pgd = bd42c000
[ 751.998681] [455f448e] *pgd=00000000
[ 752.002383] Internal error: Oops: 5 [#1] SMP ARM
[ 752.007008] Modules linked in: usb_f_uac1 g_audio(+) usb_f_mass_storage libcomposite configfs [last unloaded: g_mass_storage]
[ 752.018427] CPU: 0 PID: 692 Comm: modprobe Not tainted 3.18.0-rc4-00345-g842f57b #10
[ 752.026176] task: bdb3ba80 ti: bd41a000 task.ti: bd41a000
[ 752.031590] PC is at filp_close+0xc/0x84
[ 752.035530] LR is at gaudio_cleanup+0x28/0x54 [usb_f_uac1]
[ 752.041023] pc : [<800ec94c>] lr : [<7f03c63c>] psr: 20000013
[ 752.041023] sp : bd41bcc8 ip : bd41bce8 fp : bd41bce4
[ 752.052504] r10: 7f036234 r9 : 7f036220 r8 : 7f036500
[ 752.057732] r7 : bd456480 r6 : 7f036500 r5 : 7f03626c r4 : bd441000
[ 752.064264] r3 : 7f03b3dc r2 : 7f03cab0 r1 : 00000000 r0 : 455f4456
[ 752.070798] Flags: nzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user
[ 752.077938] Control: 10c5387d Table: bd42c04a DAC: 00000015
[ 752.083688] Process modprobe (pid: 692, stack limit = 0xbd41a240)
[ 752.089786] Stack: (0xbd41bcc8 to 0xbd41c000)
[ 752.094152] bcc0: 7f03b3dc bd441000 7f03626c 7f036500 bd41bcfc bd41bce8
[ 752.102337] bce0: 7f03c63c 800ec94c 7f03b3dc bdaa6b00 bd41bd14 bd41bd00 7f03b3f4 7f03c620
[ 752.110521] bd00: 7f03b3dc 7f03cbd4 bd41bd2c bd41bd18 7f00f88c 7f03b3e8 00000000 fffffffe
[ 752.118705] bd20: bd41bd5c bd41bd30 7f0380d8 7f00f874 7f038000 bd456480 7f036364 be392240
[ 752.126889] bd40: 00000000 7f00f620 7f00f638 bd41a008 bd41bd94 bd41bd60 7f00f6d4 7f03800c
[ 752.135073] bd60: 00000001 00000000 8047438c be3a4000 7f036364 7f036364 7f00db28 7f00f620
[ 752.143257] bd80: 7f00f638 bd41a008 bd41bdb4 bd41bd98 804742ac 7f00f644 00000000 809adde0
[ 752.151442] bda0: 7f036364 7f036364 bd41bdcc bd41bdb8 804743c8 80474284 7f03633c 7f036200
[ 752.159626] bdc0: bd41bdf4 bd41bdd0 7f00d5b4 8047435c bd41a000 80974060 7f038158 00000000
[ 752.167811] bde0: 80974060 bdaa9940 bd41be04 bd41bdf8 7f03816c 7f00d518 bd41be8c bd41be08
[ 752.175995] be00: 80008a5c 7f038164 be001f00 7f0363c4 bd41bf48 00000000 bd41be54 bd41be28
[ 752.184179] be20: 800e9498 800e8e74 00000002 00000003 bd4129c0 c0a07000 00000001 7f0363c4
[ 752.192363] be40: bd41bf48 00000000 bd41be74 bd41be58 800de780 800e9320 bd41a000 7f0363d0
[ 752.200547] be60: 00000000 bd41a000 7f0363d0 00000000 bd41beec 7f0363c4 bd41bf48 00000000
[ 752.208731] be80: bd41bf44 bd41be90 80093e54 800089e0 ffff8000 00007fff 80091390 0000065f
[ 752.216915] bea0: 00000000 c0a0834c bd41bf7c 00000086 bd41bf50 00000000 7f03651c 00000086
[ 752.225099] bec0: bd41a010 00c28758 800ddcc4 800ddae0 000000d2 bd412a00 bd41bf24 00000000
[ 752.233283] bee0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 752.241467] bf00: 00000000 00000000 00000000 00000000 00000000 00000000 bd41bf44 000025b0
[ 752.249651] bf20: 00c28a08 00c28758 00000080 8000edc4 bd41a000 00000000 bd41bfa4 bd41bf48
[ 752.257835] bf40: 800943e4 800932ec c0a07000 000025b0 c0a07f8c c0a07ea4 c0a08e5c 0000051c
[ 752.266019] bf60: 0000088c 00000000 00000000 00000000 00000018 00000019 00000010 0000000b
[ 752.274203] bf80: 00000009 00000000 00000000 000025b0 00000000 00c28758 00000000 bd41bfa8
[ 752.282387] bfa0: 8000ec00 8009430c 000025b0 00000000 00c28a08 000025b0 00c28758 00c28980
[ 752.290571] bfc0: 000025b0 00000000 00c28758 00000080 000a6a78 00000007 00c28718 00c28980
[ 752.298756] bfe0: 7ebc1af0 7ebc1ae0 0001a32c 76e9c490 60000010 00c28a08 22013510 ecebffff
[ 752.306933] Backtrace:
[ 752.309414] [<800ec940>] (filp_close) from [<7f03c63c>] (gaudio_cleanup+0x28/0x54 [usb_f_uac1])
[ 752.318115] r6:7f036500 r5:7f03626c r4:bd441000 r3:7f03b3dc
[ 752.323851] [<7f03c614>] (gaudio_cleanup [usb_f_uac1]) from [<7f03b3f4>] (f_audio_free_inst+0x18/0x68 [usb_f_uac1])
[ 752.334288] r4:bdaa6b00 r3:7f03b3dc
[ 752.337931] [<7f03b3dc>] (f_audio_free_inst [usb_f_uac1]) from [<7f00f88c>] (usb_put_function_instance+0x24/0x30 [libcomposite])
[ 752.349498] r4:7f03cbd4 r3:7f03b3dc
[ 752.353127] [<7f00f868>] (usb_put_function_instance [libcomposite]) from [<7f0380d8>] (audio_bind+0xd8/0xfc [g_audio])
[ 752.363824] r4:fffffffe r3:00000000
[ 752.367456] [<7f038000>] (audio_bind [g_audio]) from [<7f00f6d4>] (composite_bind+0x9c/0x1e8 [libcomposite])
[ 752.377284] r10:bd41a008 r9:7f00f638 r8:7f00f620 r7:00000000 r6:be392240 r5:7f036364
[ 752.385193] r4:bd456480 r3:7f038000
[ 752.388825] [<7f00f638>] (composite_bind [libcomposite]) from [<804742ac>] (udc_bind_to_driver+0x34/0xd8)
[ 752.398394] r10:bd41a008 r9:7f00f638 r8:7f00f620 r7:7f00db28 r6:7f036364 r5:7f036364
[ 752.406302] r4:be3a4000
[ 752.408860] [<80474278>] (udc_bind_to_driver) from [<804743c8>] (usb_gadget_probe_driver+0x78/0xa8)
[ 752.417908] r6:7f036364 r5:7f036364 r4:809adde0 r3:00000000
[ 752.423649] [<80474350>] (usb_gadget_probe_driver) from [<7f00d5b4>] (usb_composite_probe+0xa8/0xd4 [libcomposite])
[ 752.434086] r5:7f036200 r4:7f03633c
[ 752.437713] [<7f00d50c>] (usb_composite_probe [libcomposite]) from [<7f03816c>] (audio_driver_init+0x14/0x1c [g_audio])
[ 752.448498] r9:bdaa9940 r8:80974060 r7:00000000 r6:7f038158 r5:80974060 r4:bd41a000
[ 752.456330] [<7f038158>] (audio_driver_init [g_audio]) from [<80008a5c>] (do_one_initcall+0x88/0x1d4)
[ 752.465564] [<800089d4>] (do_one_initcall) from [<80093e54>] (load_module+0xb74/0x1020)
[ 752.473571] r10:00000000 r9:bd41bf48 r8:7f0363c4 r7:bd41beec r6:00000000 r5:7f0363d0
[ 752.481478] r4:bd41a000
[ 752.484037] [<800932e0>] (load_module) from [<800943e4>] (SyS_init_module+0xe4/0xf8)
[ 752.491781] r10:00000000 r9:bd41a000 r8:8000edc4 r7:00000080 r6:00c28758 r5:00c28a08
[ 752.499689] r4:000025b0
[ 752.502252] [<80094300>] (SyS_init_module) from [<8000ec00>] (ret_fast_syscall+0x0/0x48)
[ 752.510345] r6:00c28758 r5:00000000 r4:000025b0
[ 752.515013] Code: 808475b4 e1a0c00d e92dd878 e24cb004 (e5904038)
[ 752.521223] ---[ end trace 70babe34de4ab99b ]---
Segmentation fault
Signed-off-by: Peter Chen <[email protected]>
Signed-off-by: Felipe Balbi <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/usb/gadget/function/f_uac1.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/usb/gadget/function/f_uac1.c b/drivers/usb/gadget/function/f_uac1.c
index f7b203293205..e9715845f82e 100644
--- a/drivers/usb/gadget/function/f_uac1.c
+++ b/drivers/usb/gadget/function/f_uac1.c
@@ -897,7 +897,6 @@ static void f_audio_free_inst(struct usb_function_instance *f)
struct f_uac1_opts *opts;
opts = container_of(f, struct f_uac1_opts, func_inst);
- gaudio_cleanup(opts->card);
if (opts->fn_play_alloc)
kfree(opts->fn_play);
if (opts->fn_cap_alloc)
@@ -935,6 +934,7 @@ static void f_audio_free(struct usb_function *f)
struct f_audio *audio = func_to_audio(f);
struct f_uac1_opts *opts;
+ gaudio_cleanup(&audio->card);
opts = container_of(f->fi, struct f_uac1_opts, func_inst);
kfree(audio);
mutex_lock(&opts->lock);
--
2.17.1
From: Lennart Sorensen <[email protected]>
[ Upstream commit afc9d590b8a150cfeaac0078ef5de6fb21a5ea6a ]
Errata i856 for the AM572x (DRA7xx) points out that the 32.768KHz external
crystal is not enabled at power up. Instead the CPU falls back to using
an emulation for the 32KHz clock which is SYSCLK1/610. SYSCLK1 is usually
20MHz on boards so far (which gives an emulated frequency of 32.786KHz),
but can also be 19.2 or 27MHz which result in much larger drift.
Since this is used to drive the master counter at 32.768KHz * 375 /
2 = 6.144MHz, the emulated speed for 20MHz is of by 570ppm, or about 43
seconds per day, and more than the 500ppm NTP is able to tolerate.
Checking the CTRL_CORE_BOOTSTRAP register can determine if the CPU
is using the real 32.768KHz crystal or the emulated SYSCLK1/610, and
by known that the real counter frequency can be determined and used.
The real speed is then SYSCLK1 / 610 * 375 / 2 or SYSCLK1 * 75 / 244.
Signed-off-by: Len Sorensen <[email protected]>
Tested-by: Lokesh Vutla <[email protected]>
Signed-off-by: Tony Lindgren <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm/mach-omap2/control.h | 4 ++++
arch/arm/mach-omap2/timer.c | 36 +++++++++++++++++++++++++++++++++--
2 files changed, 38 insertions(+), 2 deletions(-)
diff --git a/arch/arm/mach-omap2/control.h b/arch/arm/mach-omap2/control.h
index a3c013345c45..a80ac2d70bb1 100644
--- a/arch/arm/mach-omap2/control.h
+++ b/arch/arm/mach-omap2/control.h
@@ -286,6 +286,10 @@
#define OMAP5XXX_CONTROL_STATUS 0x134
#define OMAP5_DEVICETYPE_MASK (0x7 << 6)
+/* DRA7XX CONTROL CORE BOOTSTRAP */
+#define DRA7_CTRL_CORE_BOOTSTRAP 0x6c4
+#define DRA7_SPEEDSELECT_MASK (0x3 << 8)
+
/*
* REVISIT: This list of registers is not comprehensive - there are more
* that should be added.
diff --git a/arch/arm/mach-omap2/timer.c b/arch/arm/mach-omap2/timer.c
index fb0cb2b817a9..7d45c84c69ba 100644
--- a/arch/arm/mach-omap2/timer.c
+++ b/arch/arm/mach-omap2/timer.c
@@ -54,6 +54,7 @@
#include "soc.h"
#include "common.h"
+#include "control.h"
#include "powerdomain.h"
#include "omap-secure.h"
@@ -496,7 +497,8 @@ static void __init realtime_counter_init(void)
void __iomem *base;
static struct clk *sys_clk;
unsigned long rate;
- unsigned int reg, num, den;
+ unsigned int reg;
+ unsigned long long num, den;
base = ioremap(REALTIME_COUNTER_BASE, SZ_32);
if (!base) {
@@ -511,6 +513,35 @@ static void __init realtime_counter_init(void)
}
rate = clk_get_rate(sys_clk);
+
+ if (soc_is_dra7xx()) {
+ /*
+ * Errata i856 says the 32.768KHz crystal does not start at
+ * power on, so the CPU falls back to an emulated 32KHz clock
+ * based on sysclk / 610 instead. This causes the master counter
+ * frequency to not be 6.144MHz but at sysclk / 610 * 375 / 2
+ * (OR sysclk * 75 / 244)
+ *
+ * This affects at least the DRA7/AM572x 1.0, 1.1 revisions.
+ * Of course any board built without a populated 32.768KHz
+ * crystal would also need this fix even if the CPU is fixed
+ * later.
+ *
+ * Either case can be detected by using the two speedselect bits
+ * If they are not 0, then the 32.768KHz clock driving the
+ * coarse counter that corrects the fine counter every time it
+ * ticks is actually rate/610 rather than 32.768KHz and we
+ * should compensate to avoid the 570ppm (at 20MHz, much worse
+ * at other rates) too fast system time.
+ */
+ reg = omap_ctrl_readl(DRA7_CTRL_CORE_BOOTSTRAP);
+ if (reg & DRA7_SPEEDSELECT_MASK) {
+ num = 75;
+ den = 244;
+ goto sysclk1_based;
+ }
+ }
+
/* Numerator/denumerator values refer TRM Realtime Counter section */
switch (rate) {
case 12000000:
@@ -545,6 +576,7 @@ static void __init realtime_counter_init(void)
break;
}
+sysclk1_based:
/* Program numerator and denumerator registers */
reg = readl_relaxed(base + INCREMENTER_NUMERATOR_OFFSET) &
NUMERATOR_DENUMERATOR_MASK;
@@ -556,7 +588,7 @@ static void __init realtime_counter_init(void)
reg |= den;
writel_relaxed(reg, base + INCREMENTER_DENUMERATOR_RELOAD_OFFSET);
- arch_timer_freq = (rate / den) * num;
+ arch_timer_freq = DIV_ROUND_UP_ULL(rate * num, den);
set_cntfreq();
iounmap(base);
--
2.17.1
From: Maik Broemme <[email protected]>
[ Upstream commit 8e2e03179923479ca0c0b6fdc7c93ecf89bce7a8 ]
Similar to the AR93xx and the AR94xx series, the AR95xx also have the same
quirk for the Bus Reset. It will lead to instant system reset if the
device is assigned via VFIO to a KVM VM. I've been able reproduce this
behavior with a MikroTik R11e-2HnD.
Fixes: c3e59ee4e766 ("PCI: Mark Atheros AR93xx to avoid bus reset")
Signed-off-by: Maik Broemme <[email protected]>
Signed-off-by: Bjorn Helgaas <[email protected]>
CC: [email protected] # v3.14+
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/pci/quirks.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index 9e86ace95832..0b75b47a5329 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -3081,6 +3081,7 @@ static void quirk_no_bus_reset(struct pci_dev *dev)
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ATHEROS, 0x0030, quirk_no_bus_reset);
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ATHEROS, 0x0032, quirk_no_bus_reset);
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ATHEROS, 0x003c, quirk_no_bus_reset);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ATHEROS, 0x0033, quirk_no_bus_reset);
#ifdef CONFIG_ACPI
/*
--
2.17.1
From: Jiri Olsa <[email protected]>
[ Upstream commit e64a5470dcd2900ab8f8f83638c00098b10e6300 ]
This fixes the same issue Steven already fixed for x86
in following commit:
237d28db036e ftrace/jprobes/x86: Fix conflict between jprobes and function graph tracing
It fixes the crash, that happens when function graph tracing
and jprobes are used simultaneously. Please refer to above
commit for details.
Signed-off-by: Jiri Olsa <[email protected]>
Signed-off-by: Martin Schwidefsky <[email protected]>
Acked-by: Steven Rostedt <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/s390/kernel/kprobes.c | 12 ++++++++++++
1 file changed, 12 insertions(+)
diff --git a/arch/s390/kernel/kprobes.c b/arch/s390/kernel/kprobes.c
index 014d4729b134..ee03d8f0ee60 100644
--- a/arch/s390/kernel/kprobes.c
+++ b/arch/s390/kernel/kprobes.c
@@ -633,6 +633,15 @@ int __kprobes setjmp_pre_handler(struct kprobe *p, struct pt_regs *regs)
stack = (unsigned long) regs->gprs[15];
memcpy(kcb->jprobes_stack, (void *) stack, MIN_STACK_SIZE(stack));
+
+ /*
+ * jprobes use jprobe_return() which skips the normal return
+ * path of the function, and this messes up the accounting of the
+ * function graph tracer to get messed up.
+ *
+ * Pause function graph tracing while performing the jprobe function.
+ */
+ pause_graph_tracing();
return 1;
}
@@ -646,6 +655,9 @@ int __kprobes longjmp_break_handler(struct kprobe *p, struct pt_regs *regs)
struct kprobe_ctlblk *kcb = get_kprobe_ctlblk();
unsigned long stack;
+ /* It's OK to start function graph tracing again */
+ unpause_graph_tracing();
+
stack = (unsigned long) kcb->jprobe_saved_regs.gprs[15];
/* Put the regs back */
--
2.17.1
From: Jisheng Zhang <[email protected]>
[ Upstream commit 918f4cbd4340ddd1eb389cd8efa3b07ac74ec4c0 ]
After commit 52221610dd84 ("mmc: sdhci: Improve external VDD regulator
support"), for the VDD is supplied via external regulators, we ignore
the code to convert a VDD voltage request into one of the standard
SDHCI voltage levels, then program it in the SDHCI_POWER_CONTROL. This
brings two issues:
1. SDHCI_QUIRK2_CARD_ON_NEEDS_BUS_ON quirk isn't handled properly any
more.
2. What's more, once SDHCI_POWER_ON bit is set, some controllers such
as the sdhci-pxav3 used in marvell berlin SoCs require the voltage
levels programming in the SDHCI_POWER_CONTROL register, even the VDD
is supplied by external regulator. So the host in marvell berlin SoCs
still works fine after the commit. However, commit 3cbc6123a93d ("mmc:
sdhci: Set SDHCI_POWER_ON with external vmmc") sets the SDHCI_POWER_ON
bit, this would make the host in marvell berlin SoCs won't work any
more with external vmmc.
This patch restores the behavior when setting VDD through external
regulator by moving the call of mmc_regulator_set_ocr() to the end
of sdhci_set_power() function.
After this patch, the sdcard on Marvell Berlin SoC boards work again.
Signed-off-by: Jisheng Zhang <[email protected]>
Fixes: 52221610dd84 ("mmc: sdhci: Improve external VDD ...")
Reviewed-by: Ludovic Desroches <[email protected]>
Tested-by: Ludovic Desroches <[email protected]>
Signed-off-by: Ulf Hansson <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/mmc/host/sdhci.c | 19 ++++++-------------
1 file changed, 6 insertions(+), 13 deletions(-)
diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index 56578504fd24..2295bf6e94a1 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -1248,19 +1248,6 @@ static void sdhci_set_power(struct sdhci_host *host, unsigned char mode,
struct mmc_host *mmc = host->mmc;
u8 pwr = 0;
- if (!IS_ERR(mmc->supply.vmmc)) {
- spin_unlock_irq(&host->lock);
- mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, vdd);
- spin_lock_irq(&host->lock);
-
- if (mode != MMC_POWER_OFF)
- sdhci_writeb(host, SDHCI_POWER_ON, SDHCI_POWER_CONTROL);
- else
- sdhci_writeb(host, 0, SDHCI_POWER_CONTROL);
-
- return;
- }
-
if (mode != MMC_POWER_OFF) {
switch (1 << vdd) {
case MMC_VDD_165_195:
@@ -1319,6 +1306,12 @@ static void sdhci_set_power(struct sdhci_host *host, unsigned char mode,
if (host->quirks & SDHCI_QUIRK_DELAY_AFTER_POWER)
mdelay(10);
}
+
+ if (!IS_ERR(mmc->supply.vmmc)) {
+ spin_unlock_irq(&host->lock);
+ mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, vdd);
+ spin_lock_irq(&host->lock);
+ }
}
/*****************************************************************************\
--
2.17.1
From: Bjørn Mork <[email protected]>
[ Upstream commit 59536da34513c594af2a6fd35ba65ea45b6960a1 ]
The DEVICE_HWI type was added under the faulty assumption that Huawei
devices based on Qualcomm chipsets and firmware use the static USB
interface numbering known from Gobi devices. But this model does
not apply to Huawei devices like the HP branded lt4112 (Huawei me906e).
Huawei firmwares will dynamically assign interface numbers. Functions
are renumbered when the firmware is reconfigured.
Fix by changing the DEVICE_HWI type to use a simplified version
of Huawei's subclass + protocol scheme: Blacklisting known network
interface combinations and assuming the rest are serial.
Reported-and-tested-by: Muri Nicanor <[email protected]>
Tested-by: Martin Hauke <[email protected]>
Cc: <[email protected]>
Fixes: e7181d005e84 ("USB: qcserial: Add support for HP lt4112 LTE/HSPA+ Gobi 4G Modem")
Signed-off-by: Bjørn Mork <[email protected]>
Signed-off-by: Johan Hovold <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/usb/serial/qcserial.c | 54 ++++++++++++++++++++++-------------
1 file changed, 34 insertions(+), 20 deletions(-)
diff --git a/drivers/usb/serial/qcserial.c b/drivers/usb/serial/qcserial.c
index adc372411019..7e8014304b33 100644
--- a/drivers/usb/serial/qcserial.c
+++ b/drivers/usb/serial/qcserial.c
@@ -190,6 +190,10 @@ static int qcprobe(struct usb_serial *serial, const struct usb_device_id *id)
__u8 ifnum;
int altsetting = -1;
+ /* we only support vendor specific functions */
+ if (intf->desc.bInterfaceClass != USB_CLASS_VENDOR_SPEC)
+ goto done;
+
nintf = serial->dev->actconfig->desc.bNumInterfaces;
dev_dbg(dev, "Num Interfaces = %d\n", nintf);
ifnum = intf->desc.bInterfaceNumber;
@@ -309,29 +313,39 @@ static int qcprobe(struct usb_serial *serial, const struct usb_device_id *id)
break;
case QCSERIAL_HWI:
/*
- * Huawei layout:
- * 0: AT-capable modem port
- * 1: DM/DIAG
- * 2: AT-capable modem port
- * 3: CCID-compatible PCSC interface
- * 4: QMI/net
- * 5: NMEA
+ * Huawei devices map functions by subclass + protocol
+ * instead of interface numbers. The protocol identify
+ * a specific function, while the subclass indicate a
+ * specific firmware source
+ *
+ * This is a blacklist of functions known to be
+ * non-serial. The rest are assumed to be serial and
+ * will be handled by this driver
*/
- switch (ifnum) {
- case 0:
- case 2:
- dev_dbg(dev, "Modem port found\n");
- break;
- case 1:
- dev_dbg(dev, "DM/DIAG interface found\n");
- break;
- case 5:
- dev_dbg(dev, "NMEA GPS interface found\n");
- break;
- default:
- /* don't claim any unsupported interface */
+ switch (intf->desc.bInterfaceProtocol) {
+ /* QMI combined (qmi_wwan) */
+ case 0x07:
+ case 0x37:
+ case 0x67:
+ /* QMI data (qmi_wwan) */
+ case 0x08:
+ case 0x38:
+ case 0x68:
+ /* QMI control (qmi_wwan) */
+ case 0x09:
+ case 0x39:
+ case 0x69:
+ /* NCM like (huawei_cdc_ncm) */
+ case 0x16:
+ case 0x46:
+ case 0x76:
altsetting = -1;
break;
+ default:
+ dev_dbg(dev, "Huawei type serial port found (%02x/%02x/%02x)\n",
+ intf->desc.bInterfaceClass,
+ intf->desc.bInterfaceSubClass,
+ intf->desc.bInterfaceProtocol);
}
break;
default:
--
2.17.1
From: Robert Baldyga <[email protected]>
[ Upstream commit 62f4f0651ce8ef966a0e5b6db6a7a524c268fdd2 ]
This makes us sure that all requests are completed before we unbind
gadget. There are assumptions in gadget API that all requests have to
be completed and leak of complete can break some usb function drivers.
For example unbind of ECM function can cause NULL pointer dereference:
[ 26.396595] configfs-gadget gadget: unbind function
'cdc_ethernet'/e79c4c00
[ 26.414999] Unable to handle kernel NULL pointer dereference at
virtual address 00000000
(...)
[ 26.452223] PC is at ecm_unbind+0x6c/0x9c
[ 26.456209] LR is at ecm_unbind+0x68/0x9c
(...)
[ 26.603696] [<c033fdb4>] (ecm_unbind) from [<c033661c>]
(purge_configs_funcs+0x94/0xd8)
[ 26.611674] [<c033661c>] (purge_configs_funcs) from [<c0336674>]
(configfs_composite_unbind+0x14/0x34)
[ 26.620961] [<c0336674>] (configfs_composite_unbind) from
[<c0337124>] (usb_gadget_remove_driver+0x68/0x9c)
[ 26.630683] [<c0337124>] (usb_gadget_remove_driver) from [<c03376c8>]
(usb_gadget_unregister_driver+0x64/0x94)
[ 26.640664] [<c03376c8>] (usb_gadget_unregister_driver) from
[<c0336be8>] (unregister_gadget+0x20/0x3c)
[ 26.650038] [<c0336be8>] (unregister_gadget) from [<c0336c84>]
(gadget_dev_desc_UDC_store+0x80/0xb8)
[ 26.659152] [<c0336c84>] (gadget_dev_desc_UDC_store) from
[<c0335120>] (gadget_info_attr_store+0x1c/0x28)
[ 26.668703] [<c0335120>] (gadget_info_attr_store) from [<c012135c>]
(configfs_write_file+0xe8/0x148)
[ 26.677818] [<c012135c>] (configfs_write_file) from [<c00c8dd4>]
(vfs_write+0xb0/0x1a0)
[ 26.685801] [<c00c8dd4>] (vfs_write) from [<c00c91b8>]
(SyS_write+0x44/0x84)
[ 26.692834] [<c00c91b8>] (SyS_write) from [<c000e560>]
(ret_fast_syscall+0x0/0x30)
[ 26.700381] Code: e30409f8 e34c0069 eb07b88d e59430a8 (e5930000)
[ 26.706485] ---[ end trace f62a082b323838a2 ]---
It's because in some cases request is still running on endpoint during
unbind and kill_all_requests() called from s3c_hsotg_udc_stop() function
doesn't cause call of complete() of request. Missing complete() call
causes ecm->notify_req equals NULL in ecm_unbind() function, and this
is reason of this bug.
Similar breaks can be observed in another usb function drivers.
This patch fixes this bug forcing usb request completion in when
s3c_hsotg_ep_disable() is called from s3c_hsotg_udc_stop().
Acked-by: Paul Zimmerman <[email protected]>
Signed-off-by: Robert Baldyga <[email protected]>
Signed-off-by: Felipe Balbi <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/usb/dwc2/gadget.c | 10 +++++++---
1 file changed, 7 insertions(+), 3 deletions(-)
diff --git a/drivers/usb/dwc2/gadget.c b/drivers/usb/dwc2/gadget.c
index 8b5c079c7b7d..cb4c925fb87c 100644
--- a/drivers/usb/dwc2/gadget.c
+++ b/drivers/usb/dwc2/gadget.c
@@ -2590,7 +2590,7 @@ static int s3c_hsotg_ep_enable(struct usb_ep *ep,
* s3c_hsotg_ep_disable - disable given endpoint
* @ep: The endpoint to disable.
*/
-static int s3c_hsotg_ep_disable(struct usb_ep *ep)
+static int s3c_hsotg_ep_disable_force(struct usb_ep *ep, bool force)
{
struct s3c_hsotg_ep *hs_ep = our_ep(ep);
struct s3c_hsotg *hsotg = hs_ep->parent;
@@ -2611,7 +2611,7 @@ static int s3c_hsotg_ep_disable(struct usb_ep *ep)
spin_lock_irqsave(&hsotg->lock, flags);
/* terminate all requests with shutdown */
- kill_all_requests(hsotg, hs_ep, -ESHUTDOWN, false);
+ kill_all_requests(hsotg, hs_ep, -ESHUTDOWN, force);
hsotg->fifo_map &= ~(1<<hs_ep->fifo_index);
hs_ep->fifo_index = 0;
@@ -2632,6 +2632,10 @@ static int s3c_hsotg_ep_disable(struct usb_ep *ep)
return 0;
}
+static int s3c_hsotg_ep_disable(struct usb_ep *ep)
+{
+ return s3c_hsotg_ep_disable_force(ep, false);
+}
/**
* on_list - check request is on the given endpoint
* @ep: The endpoint to check.
@@ -2933,7 +2937,7 @@ static int s3c_hsotg_udc_stop(struct usb_gadget *gadget,
/* all endpoints should be shutdown */
for (ep = 1; ep < hsotg->num_of_eps; ep++)
- s3c_hsotg_ep_disable(&hsotg->eps[ep].ep);
+ s3c_hsotg_ep_disable_force(&hsotg->eps[ep].ep, true);
spin_lock_irqsave(&hsotg->lock, flags);
--
2.17.1
From: Christian Borntraeger <[email protected]>
[ Upstream commit 5de72a2247ac05bde7c89039631b3d0c6186fafb ]
ACCESS_ONCE does not work reliably on non-scalar types. For
example gcc 4.6 and 4.7 might remove the volatile tag for such
accesses during the SRA (scalar replacement of aggregates) step
(https://gcc.gnu.org/bugzilla/show_bug.cgi?id=58145)
Commit 1365039d0cb3 ("KVM: s390: Fix ipte locking") replace
ACCESS_ONCE with barriers. Lets use READ_ONCE instead.
Signed-off-by: Christian Borntraeger <[email protected]>
Acked-by: Paul E. McKenney <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/s390/kvm/gaccess.c | 18 ++++++------------
1 file changed, 6 insertions(+), 12 deletions(-)
diff --git a/arch/s390/kvm/gaccess.c b/arch/s390/kvm/gaccess.c
index 6dc0ad9c7050..8f195fa904a1 100644
--- a/arch/s390/kvm/gaccess.c
+++ b/arch/s390/kvm/gaccess.c
@@ -229,12 +229,10 @@ static void ipte_lock_simple(struct kvm_vcpu *vcpu)
goto out;
ic = &vcpu->kvm->arch.sca->ipte_control;
do {
- old = *ic;
- barrier();
+ old = READ_ONCE(*ic);
while (old.k) {
cond_resched();
- old = *ic;
- barrier();
+ old = READ_ONCE(*ic);
}
new = old;
new.k = 1;
@@ -253,8 +251,7 @@ static void ipte_unlock_simple(struct kvm_vcpu *vcpu)
goto out;
ic = &vcpu->kvm->arch.sca->ipte_control;
do {
- old = *ic;
- barrier();
+ old = READ_ONCE(*ic);
new = old;
new.k = 0;
} while (cmpxchg(&ic->val, old.val, new.val) != old.val);
@@ -269,12 +266,10 @@ static void ipte_lock_siif(struct kvm_vcpu *vcpu)
ic = &vcpu->kvm->arch.sca->ipte_control;
do {
- old = *ic;
- barrier();
+ old = READ_ONCE(*ic);
while (old.kg) {
cond_resched();
- old = *ic;
- barrier();
+ old = READ_ONCE(*ic);
}
new = old;
new.k = 1;
@@ -288,8 +283,7 @@ static void ipte_unlock_siif(struct kvm_vcpu *vcpu)
ic = &vcpu->kvm->arch.sca->ipte_control;
do {
- old = *ic;
- barrier();
+ old = READ_ONCE(*ic);
new = old;
new.kh--;
if (!new.kh)
--
2.17.1
From: alex chen <[email protected]>
[ Upstream commit 15eba0fe3eeaeb1b80489c1ebb9d47d6d7003f57 ]
Similar to ocfs2_write_end_nolock() which is metioned at commit
136f49b91710 ("ocfs2: fix journal commit deadlock"), we should unlock
pages before ocfs2_commit_trans() in ocfs2_convert_inline_data_to_extents.
Otherwise, it will cause a deadlock with journal commit threads.
Signed-off-by: Alex Chen <[email protected]>
Reviewed-by: Joseph Qi <[email protected]>
Cc: Joel Becker <[email protected]>
Cc: Mark Fasheh <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/ocfs2/alloc.c | 18 +++++++++---------
1 file changed, 9 insertions(+), 9 deletions(-)
diff --git a/fs/ocfs2/alloc.c b/fs/ocfs2/alloc.c
index d9db90446c9d..3564b896a92e 100644
--- a/fs/ocfs2/alloc.c
+++ b/fs/ocfs2/alloc.c
@@ -6871,7 +6871,7 @@ int ocfs2_convert_inline_data_to_extents(struct inode *inode,
if (IS_ERR(handle)) {
ret = PTR_ERR(handle);
mlog_errno(ret);
- goto out_unlock;
+ goto out;
}
ret = ocfs2_journal_access_di(handle, INODE_CACHE(inode), di_bh,
@@ -6929,7 +6929,7 @@ int ocfs2_convert_inline_data_to_extents(struct inode *inode,
if (ret) {
mlog_errno(ret);
need_free = 1;
- goto out_commit;
+ goto out_unlock;
}
page_end = PAGE_CACHE_SIZE;
@@ -6962,12 +6962,16 @@ int ocfs2_convert_inline_data_to_extents(struct inode *inode,
if (ret) {
mlog_errno(ret);
need_free = 1;
- goto out_commit;
+ goto out_unlock;
}
inode->i_blocks = ocfs2_inode_sector_count(inode);
}
+out_unlock:
+ if (pages)
+ ocfs2_unlock_and_free_pages(pages, num_pages);
+
out_commit:
if (ret < 0 && did_quota)
dquot_free_space_nodirty(inode,
@@ -6987,15 +6991,11 @@ int ocfs2_convert_inline_data_to_extents(struct inode *inode,
ocfs2_commit_trans(osb, handle);
-out_unlock:
+out:
if (data_ac)
ocfs2_free_alloc_context(data_ac);
-
-out:
- if (pages) {
- ocfs2_unlock_and_free_pages(pages, num_pages);
+ if (pages)
kfree(pages);
- }
return ret;
}
--
2.17.1
From: David Dueck <[email protected]>
[ Upstream commit 1ab36387ea4face01aac3560b396b1e2ce07c4ff ]
Not all gpio banks are necessarily enabled, in the current code this can
lead to null pointer dereferences.
[ 51.130000] Unable to handle kernel NULL pointer dereference at virtual address 00000058
[ 51.130000] pgd = dee04000
[ 51.130000] [00000058] *pgd=3f66d831, *pte=00000000, *ppte=00000000
[ 51.140000] Internal error: Oops: 17 [#1] ARM
[ 51.140000] Modules linked in:
[ 51.140000] CPU: 0 PID: 1664 Comm: cat Not tainted 4.1.1+ #6
[ 51.140000] Hardware name: Atmel SAMA5
[ 51.140000] task: df6dd880 ti: dec60000 task.ti: dec60000
[ 51.140000] PC is at at91_pinconf_get+0xb4/0x200
[ 51.140000] LR is at at91_pinconf_get+0xb4/0x200
[ 51.140000] pc : [<c01e71a0>] lr : [<c01e71a0>] psr: 600f0013
sp : dec61e48 ip : 600f0013 fp : df522538
[ 51.140000] r10: df52250c r9 : 00000058 r8 : 00000068
[ 51.140000] r7 : 00000000 r6 : df53c910 r5 : 00000000 r4 : dec61e7c
[ 51.140000] r3 : 00000000 r2 : c06746d4 r1 : 00000000 r0 : 00000003
[ 51.140000] Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user
[ 51.140000] Control: 10c53c7d Table: 3ee04059 DAC: 00000015
[ 51.140000] Process cat (pid: 1664, stack limit = 0xdec60208)
[ 51.140000] Stack: (0xdec61e48 to 0xdec62000)
[ 51.140000] 1e40: 00000358 00000000 df522500 ded15f80 c05a9d08 ded15f80
[ 51.140000] 1e60: 0000048c 00000061 df522500 ded15f80 c05a9d08 c01e7304 ded15f80 00000000
[ 51.140000] 1e80: c01e6008 00000060 0000048c c01e6034 c01e5f6c ded15f80 dec61ec0 00000000
[ 51.140000] 1ea0: 00020000 ded6f280 dec61f80 00000001 00000001 c00ae0b8 b6e80000 ded15fb0
[ 51.140000] 1ec0: 00000000 00000000 df4bc974 00000055 00000800 ded6f280 b6e80000 ded6f280
[ 51.140000] 1ee0: ded6f280 00020000 b6e80000 00000000 00020000 c0090dec c0671e1c dec61fb0
[ 51.140000] 1f00: b6f8b510 00000001 00004201 c000924c 00000000 00000003 00000003 00000000
[ 51.140000] 1f20: df4bc940 00022000 00000022 c066e188 b6e7f000 c00836f4 000b6e7f ded6f280
[ 51.140000] 1f40: ded6f280 b6e80000 dec61f80 ded6f280 00020000 c0091508 00000000 00000003
[ 51.140000] 1f60: 00022000 00000000 00000000 ded6f280 ded6f280 00020000 b6e80000 c0091d9c
[ 51.140000] 1f80: 00000000 00000000 ffffffff 00020000 00020000 b6e80000 00000003 c000f124
[ 51.140000] 1fa0: dec60000 c000efa0 00020000 00020000 00000003 b6e80000 00020000 000271c4
[ 51.140000] 1fc0: 00020000 00020000 b6e80000 00000003 7fffe000 00000000 00000000 00020000
[ 51.140000] 1fe0: 00000000 bef50b64 00013835 b6f29c76 400f0030 00000003 00000000 00000000
[ 51.140000] [<c01e71a0>] (at91_pinconf_get) from [<c01e7304>] (at91_pinconf_dbg_show+0x18/0x2c0)
[ 51.140000] [<c01e7304>] (at91_pinconf_dbg_show) from [<c01e6034>] (pinconf_pins_show+0xc8/0xf8)
[ 51.140000] [<c01e6034>] (pinconf_pins_show) from [<c00ae0b8>] (seq_read+0x1a0/0x464)
[ 51.140000] [<c00ae0b8>] (seq_read) from [<c0090dec>] (__vfs_read+0x20/0xd0)
[ 51.140000] [<c0090dec>] (__vfs_read) from [<c0091508>] (vfs_read+0x7c/0x108)
[ 51.140000] [<c0091508>] (vfs_read) from [<c0091d9c>] (SyS_read+0x40/0x94)
[ 51.140000] [<c0091d9c>] (SyS_read) from [<c000efa0>] (ret_fast_syscall+0x0/0x3c)
[ 51.140000] Code: eb010ec2 e30a0d08 e34c005a eb0ae5a7 (e5993000)
[ 51.150000] ---[ end trace fb3c370da3ea4794 ]---
Fixes: a0b957f306fa ("pinctrl: at91: allow to have disabled gpio bank")
Cc: [email protected] # 3.18
Signed-off-by: David Dueck <[email protected]>
Acked-by: Ludovic Desroches <[email protected]>
Acked-by: Alexandre Belloni <[email protected]>
Acked-by: Nicolas Ferre <[email protected]>
Cc: Boris Brezillon <[email protected]>
Cc: Jean-Christophe PLAGNIOL-VILLARD <[email protected]>
Cc: [email protected]
Cc: [email protected]
Signed-off-by: Linus Walleij <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/pinctrl/pinctrl-at91.c | 15 +++++++++++++++
1 file changed, 15 insertions(+)
diff --git a/drivers/pinctrl/pinctrl-at91.c b/drivers/pinctrl/pinctrl-at91.c
index d6380c187db6..ceebe2e3882f 100644
--- a/drivers/pinctrl/pinctrl-at91.c
+++ b/drivers/pinctrl/pinctrl-at91.c
@@ -322,6 +322,9 @@ static const struct pinctrl_ops at91_pctrl_ops = {
static void __iomem *pin_to_controller(struct at91_pinctrl *info,
unsigned int bank)
{
+ if (!gpio_chips[bank])
+ return NULL;
+
return gpio_chips[bank]->regbase;
}
@@ -731,6 +734,10 @@ static int at91_pmx_set(struct pinctrl_dev *pctldev, unsigned selector,
pin = &pins_conf[i];
at91_pin_dbg(info->dev, pin);
pio = pin_to_controller(info, pin->bank);
+
+ if (!pio)
+ continue;
+
mask = pin_to_mask(pin->pin);
at91_mux_disable_interrupt(pio, mask);
switch (pin->mux) {
@@ -850,6 +857,10 @@ static int at91_pinconf_get(struct pinctrl_dev *pctldev,
*config = 0;
dev_dbg(info->dev, "%s:%d, pin_id=%d", __func__, __LINE__, pin_id);
pio = pin_to_controller(info, pin_to_bank(pin_id));
+
+ if (!pio)
+ return -EINVAL;
+
pin = pin_id % MAX_NB_GPIO_PER_BANK;
if (at91_mux_get_multidrive(pio, pin))
@@ -891,6 +902,10 @@ static int at91_pinconf_set(struct pinctrl_dev *pctldev,
"%s:%d, pin_id=%d, config=0x%lx",
__func__, __LINE__, pin_id, config);
pio = pin_to_controller(info, pin_to_bank(pin_id));
+
+ if (!pio)
+ return -EINVAL;
+
pin = pin_id % MAX_NB_GPIO_PER_BANK;
mask = pin_to_mask(pin);
--
2.17.1
From: Chris Wilson <[email protected]>
[ Upstream commit a50940510e94f5fb65ffd79877a60592d85598a9 ]
The core fix was applied in
commit a63b03e2d2477586440741677ecac45bcf28d7b1
Author: Chris Wilson <[email protected]>
Date: Tue Jan 6 10:29:35 2015 +0000
mutex: Always clear owner field upon mutex_unlock()
(note the absence of stable@ tag)
so we can now revert our band-aid commit 226e5ae9e5f910 for -next.
Signed-off-by: Chris Wilson <[email protected]>
Cc: Daniel Vetter <[email protected]>
Cc: Jani Nikula <[email protected]>
Signed-off-by: Rodrigo Vivi <[email protected]>
Signed-off-by: Daniel Vetter <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/i915/i915_gem.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c
index d88dbedeaa77..d0f0a7943d88 100644
--- a/drivers/gpu/drm/i915/i915_gem.c
+++ b/drivers/gpu/drm/i915/i915_gem.c
@@ -5144,7 +5144,7 @@ static bool mutex_is_locked_by(struct mutex *mutex, struct task_struct *task)
if (!mutex_is_locked(mutex))
return false;
-#if defined(CONFIG_SMP) && !defined(CONFIG_DEBUG_MUTEXES)
+#if defined(CONFIG_SMP) || defined(CONFIG_DEBUG_MUTEXES)
return mutex->owner == task;
#else
/* Since UP may be pre-empted, we cannot assume that we own the lock */
--
2.17.1
From: Matthijs van Duin <[email protected]>
[ Upstream commit 448c077eeb02240c430db2a2c3bf5285a4c65d66 ]
'adr' yields a data-pointer, not a function-pointer.
Fixes: 999f934de195 ("ARM: omap5/dra7xx: Enable booting secondary
CPU in HYP mode")
Signed-off-by: Matthijs van Duin <[email protected]>
Signed-off-by: Tony Lindgren <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm/mach-omap2/omap-headsmp.S | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/arch/arm/mach-omap2/omap-headsmp.S b/arch/arm/mach-omap2/omap-headsmp.S
index 6d1dffca6c7b..748dde9fa4a5 100644
--- a/arch/arm/mach-omap2/omap-headsmp.S
+++ b/arch/arm/mach-omap2/omap-headsmp.S
@@ -17,6 +17,7 @@
#include <linux/linkage.h>
#include <linux/init.h>
+#include <asm/assembler.h>
#include "omap44xx.h"
@@ -56,7 +57,7 @@ wait_2: ldr r2, =AUX_CORE_BOOT0_PA @ read from AuxCoreBoot0
cmp r0, r4
bne wait_2
ldr r12, =API_HYP_ENTRY
- adr r0, hyp_boot
+ badr r0, hyp_boot
smc #0
hyp_boot:
b secondary_startup
--
2.17.1
From: Ian Munsie <[email protected]>
[ Upstream commit 0712dc7e73e59d79bcead5d5520acf4e9e917e87 ]
An issue was introduced with "cxl: Unmap MMIO regions when detaching a
context" (b123429e6a9e8d03aacf888d23262835f0081448) where closing a
context normally could also unmap the problem state area of other
contexts currently using the AFU.
It was also discovered that after a context's MMIO space had been
unmapped it would read 0s when accessing it, whereas the expected
behaviour was for the access to fail altogether.
In order to address these issues, this patch does two things:
- Forced mmap unmapping is only done when we are forcefully detaching
all contexts, and not in the normal detach path. Since the normal
context close path is tied to the file release any mmaps must have
already been released so we don't need to worry in that case.
- The mmap path now uses a vm_operations_struct with a fault handler.
The fault handler ensures that the context is in started state,
otherwise it fails the access attempt with a SIGBUS.
Fixes: b123429e6a9e ("cxl: Unmap MMIO regions when detaching a context")
Signed-off-by: Ian Munsie <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/misc/cxl/context.c | 82 +++++++++++++++++++++++++++++---------
drivers/misc/cxl/file.c | 14 ++++---
2 files changed, 71 insertions(+), 25 deletions(-)
diff --git a/drivers/misc/cxl/context.c b/drivers/misc/cxl/context.c
index 51fd6b524371..d1b55fe62817 100644
--- a/drivers/misc/cxl/context.c
+++ b/drivers/misc/cxl/context.c
@@ -100,6 +100,46 @@ int cxl_context_init(struct cxl_context *ctx, struct cxl_afu *afu, bool master,
return 0;
}
+static int cxl_mmap_fault(struct vm_area_struct *vma, struct vm_fault *vmf)
+{
+ struct cxl_context *ctx = vma->vm_file->private_data;
+ unsigned long address = (unsigned long)vmf->virtual_address;
+ u64 area, offset;
+
+ offset = vmf->pgoff << PAGE_SHIFT;
+
+ pr_devel("%s: pe: %i address: 0x%lx offset: 0x%llx\n",
+ __func__, ctx->pe, address, offset);
+
+ if (ctx->afu->current_mode == CXL_MODE_DEDICATED) {
+ area = ctx->afu->psn_phys;
+ if (offset > ctx->afu->adapter->ps_size)
+ return VM_FAULT_SIGBUS;
+ } else {
+ area = ctx->psn_phys;
+ if (offset > ctx->psn_size)
+ return VM_FAULT_SIGBUS;
+ }
+
+ mutex_lock(&ctx->status_mutex);
+
+ if (ctx->status != STARTED) {
+ mutex_unlock(&ctx->status_mutex);
+ pr_devel("%s: Context not started, failing problem state access\n", __func__);
+ return VM_FAULT_SIGBUS;
+ }
+
+ vm_insert_pfn(vma, address, (area + offset) >> PAGE_SHIFT);
+
+ mutex_unlock(&ctx->status_mutex);
+
+ return VM_FAULT_NOPAGE;
+}
+
+static const struct vm_operations_struct cxl_mmap_vmops = {
+ .fault = cxl_mmap_fault,
+};
+
/*
* Map a per-context mmio space into the given vma.
*/
@@ -108,26 +148,25 @@ int cxl_context_iomap(struct cxl_context *ctx, struct vm_area_struct *vma)
u64 len = vma->vm_end - vma->vm_start;
len = min(len, ctx->psn_size);
- if (ctx->afu->current_mode == CXL_MODE_DEDICATED) {
- vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot);
- return vm_iomap_memory(vma, ctx->afu->psn_phys, ctx->afu->adapter->ps_size);
- }
+ if (ctx->afu->current_mode != CXL_MODE_DEDICATED) {
+ /* make sure there is a valid per process space for this AFU */
+ if ((ctx->master && !ctx->afu->psa) || (!ctx->afu->pp_psa)) {
+ pr_devel("AFU doesn't support mmio space\n");
+ return -EINVAL;
+ }
- /* make sure there is a valid per process space for this AFU */
- if ((ctx->master && !ctx->afu->psa) || (!ctx->afu->pp_psa)) {
- pr_devel("AFU doesn't support mmio space\n");
- return -EINVAL;
+ /* Can't mmap until the AFU is enabled */
+ if (!ctx->afu->enabled)
+ return -EBUSY;
}
- /* Can't mmap until the AFU is enabled */
- if (!ctx->afu->enabled)
- return -EBUSY;
-
pr_devel("%s: mmio physical: %llx pe: %i master:%i\n", __func__,
ctx->psn_phys, ctx->pe , ctx->master);
+ vma->vm_flags |= VM_IO | VM_PFNMAP;
vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot);
- return vm_iomap_memory(vma, ctx->psn_phys, len);
+ vma->vm_ops = &cxl_mmap_vmops;
+ return 0;
}
/*
@@ -150,12 +189,6 @@ static void __detach_context(struct cxl_context *ctx)
afu_release_irqs(ctx);
flush_work(&ctx->fault_work); /* Only needed for dedicated process */
wake_up_all(&ctx->wq);
-
- /* Release Problem State Area mapping */
- mutex_lock(&ctx->mapping_lock);
- if (ctx->mapping)
- unmap_mapping_range(ctx->mapping, 0, 0, 1);
- mutex_unlock(&ctx->mapping_lock);
}
/*
@@ -184,6 +217,17 @@ void cxl_context_detach_all(struct cxl_afu *afu)
* created and torn down after the IDR removed
*/
__detach_context(ctx);
+
+ /*
+ * We are force detaching - remove any active PSA mappings so
+ * userspace cannot interfere with the card if it comes back.
+ * Easiest way to exercise this is to unbind and rebind the
+ * driver via sysfs while it is in use.
+ */
+ mutex_lock(&ctx->mapping_lock);
+ if (ctx->mapping)
+ unmap_mapping_range(ctx->mapping, 0, 0, 1);
+ mutex_unlock(&ctx->mapping_lock);
}
mutex_unlock(&afu->contexts_lock);
}
diff --git a/drivers/misc/cxl/file.c b/drivers/misc/cxl/file.c
index e9f2f10dbb37..b15d8113877c 100644
--- a/drivers/misc/cxl/file.c
+++ b/drivers/misc/cxl/file.c
@@ -140,18 +140,20 @@ static long afu_ioctl_start_work(struct cxl_context *ctx,
pr_devel("%s: pe: %i\n", __func__, ctx->pe);
- mutex_lock(&ctx->status_mutex);
- if (ctx->status != OPENED) {
- rc = -EIO;
- goto out;
- }
-
+ /* Do this outside the status_mutex to avoid a circular dependency with
+ * the locking in cxl_mmap_fault() */
if (copy_from_user(&work, uwork,
sizeof(struct cxl_ioctl_start_work))) {
rc = -EFAULT;
goto out;
}
+ mutex_lock(&ctx->status_mutex);
+ if (ctx->status != OPENED) {
+ rc = -EIO;
+ goto out;
+ }
+
/*
* if any of the reserved fields are set or any of the unused
* flags are set it's invalid
--
2.17.1
On Thu, Oct 25, 2018 at 10:18:10AM -0400, Sasha Levin wrote:
> From: "Paul E. McKenney" <[email protected]>
>
> [ Upstream commit c0135d07b013fa8f7ba9ec91b4369c372e6a28cb ]
>
> If the scheduling-clock interrupt sets the current tasks need_qs flag,
> but if the current CPU passes through a quiescent state in the meantime,
> then rcu_preempt_qs() will fail to clear the need_qs flag, which can fool
> RCU into thinking that additional rcu_read_unlock_special() processing
> is needed. This commit therefore clears the need_qs flag before checking
> for additional processing.
Given that this produced a splat that someone (you, in fact) actually
encountered, no objection to it going to -stable.
> For this problem to occur, we need rcu_preempt_data.passed_quiesce equal
> to true and current->rcu_read_unlock_special.b.need_qs also equal to true.
> This condition can occur as follows:
>
> 1. CPU 0 is aware of the current preemptible RCU grace period,
> but has not yet passed through a quiescent state. Among other
> things, this means that rcu_preempt_data.passed_quiesce is false.
>
> 2. Task A running on CPU 0 enters a preemptible RCU read-side
> critical section.
>
> 3. CPU 0 takes a scheduling-clock interrupt, which notices the
> RCU read-side critical section and the need for a quiescent state,
> and thus sets current->rcu_read_unlock_special.b.need_qs to true.
>
> 4. Task A is preempted, enters the scheduler, eventually invoking
> rcu_preempt_note_context_switch() which in turn invokes
> rcu_preempt_qs().
>
> Because rcu_preempt_data.passed_quiesce is false,
> control enters the body of the "if" statement, which sets
> rcu_preempt_data.passed_quiesce to true.
>
> 5. At this point, CPU 0 takes an interrupt. The interrupt
> handler contains an RCU read-side critical section, and
> the rcu_read_unlock() notes that current->rcu_read_unlock_special
> is nonzero, and thus invokes rcu_read_unlock_special().
>
> 6. Once in rcu_read_unlock_special(), the fact that
> current->rcu_read_unlock_special.b.need_qs is true becomes
> apparent, so rcu_read_unlock_special() invokes rcu_preempt_qs().
> Recursively, given that we interrupted out of that same
> function in the preceding step.
>
> 7. Because rcu_preempt_data.passed_quiesce is now true,
> rcu_preempt_qs() does nothing, and simply returns.
>
> 8. Upon return to rcu_read_unlock_special(), it is noted that
> current->rcu_read_unlock_special is still nonzero (because
> the interrupted rcu_preempt_qs() had not yet gotten around
> to clearing current->rcu_read_unlock_special.b.need_qs).
>
> 9. Execution proceeds to the WARN_ON_ONCE(), which notes that
> we are in an interrupt handler and thus duly splats.
>
> The solution, as noted above, is to make rcu_read_unlock_special()
> clear out current->rcu_read_unlock_special.b.need_qs after calling
> rcu_preempt_qs(). The interrupted rcu_preempt_qs() will clear it again,
> but this is harmless. The worst that happens is that we clobber another
> attempt to set this field, but this is not a problem because we just
> got done reporting a quiescent state.
>
> Reported-by: Sasha Levin <[email protected]>
> Signed-off-by: Paul E. McKenney <[email protected]>
> [ paulmck: Fix embarrassing build bug noted by Sasha Levin. ]
> Tested-by: Sasha Levin <[email protected]>
> Signed-off-by: Sasha Levin <[email protected]>
> ---
> kernel/rcu/tree_plugin.h | 1 +
> 1 file changed, 1 insertion(+)
>
> diff --git a/kernel/rcu/tree_plugin.h b/kernel/rcu/tree_plugin.h
> index c1d7f27bd38f..c038831bfa57 100644
> --- a/kernel/rcu/tree_plugin.h
> +++ b/kernel/rcu/tree_plugin.h
> @@ -328,6 +328,7 @@ void rcu_read_unlock_special(struct task_struct *t)
> special = t->rcu_read_unlock_special;
> if (special.b.need_qs) {
> rcu_preempt_qs();
> + t->rcu_read_unlock_special.b.need_qs = false;
> if (!t->rcu_read_unlock_special.s) {
> local_irq_restore(flags);
> return;
> --
> 2.17.1
>
On 25/10/2018, Sasha Levin <[email protected]> wrote:
> From: Maik Broemme <[email protected]>
>
> [ Upstream commit 8e2e03179923479ca0c0b6fdc7c93ecf89bce7a8 ]
>
> Similar to the AR93xx and the AR94xx series, the AR95xx also have the same
> quirk for the Bus Reset. It will lead to instant system reset if the
> device is assigned via VFIO to a KVM VM. I've been able reproduce this
> behavior with a MikroTik R11e-2HnD.
>
> Fixes: c3e59ee4e766 ("PCI: Mark Atheros AR93xx to avoid bus reset")
> Signed-off-by: Maik Broemme <[email protected]>
> Signed-off-by: Bjorn Helgaas <[email protected]>
> CC: [email protected] # v3.14+
> Signed-off-by: Sasha Levin <[email protected]>
> ---
> drivers/pci/quirks.c | 1 +
> 1 file changed, 1 insertion(+)
>
> diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
> index 9e86ace95832..0b75b47a5329 100644
> --- a/drivers/pci/quirks.c
> +++ b/drivers/pci/quirks.c
> @@ -3081,6 +3081,7 @@ static void quirk_no_bus_reset(struct pci_dev *dev)
> DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ATHEROS, 0x0030,
> quirk_no_bus_reset);
> DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ATHEROS, 0x0032,
> quirk_no_bus_reset);
> DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ATHEROS, 0x003c,
> quirk_no_bus_reset);
> +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ATHEROS, 0x0033,
> quirk_no_bus_reset);
>
> #ifdef CONFIG_ACPI
> /*
> --
> 2.17.1
>
>
Hi
You should CC this to linux-wireless list too
Hi Sasha,
On Thu, Oct 25, 2018 at 10:17:51AM -0400, Sasha Levin wrote:
> From: Jeremiah Mahler <[email protected]>
>
> [ Upstream commit 04f9c6e6d17584340fb6c8a9469a0e6df28876d2 ]
>
> If a USB serial device (e.g. /dev/ttyUSB0) with an active program is
> unplugged, an -ENODEV (19) error will be produced after it gives up
> trying to resubmit a read.
>
> usb_serial_generic_submit_read_urb - usb_submit_urb failed: -19
>
> Add -ENODEV as one of the permanent errors along with -EPERM that
> usb_serial_generic_submit_read_urb() handles quietly without an error.
>
> Signed-off-by: Jeremiah Mahler <[email protected]>
> Signed-off-by: Johan Hovold <[email protected]>
> Signed-off-by: Sasha Levin <[email protected]>
This isn't a bug fix, but more of a clean up patch and hence does not
qualify for stable. So specifically the stable tag was left out on
purpose.
I never got a chance to talk to you in Edinburgh, but Greg mentioned you
had an opt-out list for your autosel work which I'd like to be added to.
I always mark bug fixes that qualify for stable as such so anything else
that your process picks up would already have been considered and
rejected by me.
Thanks,
Johan
> ---
> drivers/usb/serial/generic.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/drivers/usb/serial/generic.c b/drivers/usb/serial/generic.c
> index c44b911937e8..54e170dd3dad 100644
> --- a/drivers/usb/serial/generic.c
> +++ b/drivers/usb/serial/generic.c
> @@ -287,7 +287,7 @@ static int usb_serial_generic_submit_read_urb(struct usb_serial_port *port,
>
> res = usb_submit_urb(port->read_urbs[index], mem_flags);
> if (res) {
> - if (res != -EPERM) {
> + if (res != -EPERM && res != -ENODEV) {
> dev_err(&port->dev,
> "%s - usb_submit_urb failed: %d\n",
> __func__, res);
On Thu, Oct 25, 2018 at 10:17:19AM -0400, Sasha Levin wrote:
> From: Bj?rn Mork <[email protected]>
>
> [ Upstream commit 59536da34513c594af2a6fd35ba65ea45b6960a1 ]
>
> The DEVICE_HWI type was added under the faulty assumption that Huawei
> devices based on Qualcomm chipsets and firmware use the static USB
> interface numbering known from Gobi devices. But this model does
> not apply to Huawei devices like the HP branded lt4112 (Huawei me906e).
> Huawei firmwares will dynamically assign interface numbers. Functions
> are renumbered when the firmware is reconfigured.
>
> Fix by changing the DEVICE_HWI type to use a simplified version
> of Huawei's subclass + protocol scheme: Blacklisting known network
> interface combinations and assuming the rest are serial.
>
> Reported-and-tested-by: Muri Nicanor <[email protected]>
> Tested-by: Martin Hauke <[email protected]>
> Cc: <[email protected]>
> Fixes: e7181d005e84 ("USB: qcserial: Add support for HP lt4112 LTE/HSPA+ Gobi 4G Modem")
> Signed-off-by: Bj?rn Mork <[email protected]>
> Signed-off-by: Johan Hovold <[email protected]>
> Signed-off-by: Sasha Levin <[email protected]>
This one is interesting though; it was marked for stable and has a
proper fixes tag for a commit that went into 4.19. That patch in turn
had a stable tag (new device id type patch) and was backported also to
other active stable trees at the time.
Guess the stable maintainers need to check if the offending patch has
already been backported when determining how far back to apply a follow
up fix.
Note that the stable tag above lacks a version comment (e.g. "# 4.19"),
but I can see how that may be too subtle to convey this (and not all
maintainers use those). Perhaps an explicit comment should just be added
in such cases.
Thanks,
Johan
Johan Hovold <[email protected]> writes:
> Note that the stable tag above lacks a version comment (e.g. "# 4.19"),
> but I can see how that may be too subtle to convey this (and not all
> maintainers use those). Perhaps an explicit comment should just be added
> in such cases.
I have always thought that the inclusion of a "Fixes" tag made such
comments redundant. A simple "git tag --contains .." returns the same
info, and is more likely to be correct...
Or am I missing something?
I see the problem with matching up fixes to backported commits, but I've
assumed the stable maintainers all keep a small "database" of backported
commits to make such tasks easier. That's what I would have done, and
they are much smarter than me ;-)
Bjørn
On Fri, Oct 26, 2018 at 11:02:24AM +0200, Bj?rn Mork wrote:
> Johan Hovold <[email protected]> writes:
>
> > Note that the stable tag above lacks a version comment (e.g. "# 4.19"),
> > but I can see how that may be too subtle to convey this (and not all
> > maintainers use those). Perhaps an explicit comment should just be added
> > in such cases.
>
> I have always thought that the inclusion of a "Fixes" tag made such
> comments redundant. A simple "git tag --contains .." returns the same
> info, and is more likely to be correct...
>
> Or am I missing something?
No, you're right. I also assume a Fixes tag to be sufficient these days
and any version comment to be more of a hint for humans.
> I see the problem with matching up fixes to backported commits, but I've
> assumed the stable maintainers all keep a small "database" of backported
> commits to make such tasks easier. That's what I would have done, and
> they are much smarter than me ;-)
Indeed, and that would also catch things like dependencies and other
commits that eventually end up in the stable trees. This could also be
automated based on the
commit 59536da34513c594af2a6fd35ba65ea45b6960a1 upstream
that gets added to the commit message during backporting.
Thanks,
Johan
On 2018-10-25 16:17, Sasha Levin wrote:
> From: Rasmus Villemoes <[email protected]>
>
> [ Upstream commit e87c3f80ad0490d26ffe04754b7d094463b40f30 ]
>
> !strncmp(buf, "force host", 9) is true if and only if buf starts with
> "force hos". This was obviously not what was intended. The same error
> exists for "force full-speed", "force high-speed" and "test
> packet". Using strstarts avoids the error-prone hardcoding of the
> prefix length.
Not sure this qualifies for -stable, but if some other "real" -stable
patch depends textually on this, it should be ok/harmless. Just my 2c.
Rasmus
On Fri, Oct 26, 2018 at 10:39:29AM +0200, Johan Hovold wrote:
>Hi Sasha,
>
>On Thu, Oct 25, 2018 at 10:17:51AM -0400, Sasha Levin wrote:
>> From: Jeremiah Mahler <[email protected]>
>>
>> [ Upstream commit 04f9c6e6d17584340fb6c8a9469a0e6df28876d2 ]
>>
>> If a USB serial device (e.g. /dev/ttyUSB0) with an active program is
>> unplugged, an -ENODEV (19) error will be produced after it gives up
>> trying to resubmit a read.
>>
>> usb_serial_generic_submit_read_urb - usb_submit_urb failed: -19
>>
>> Add -ENODEV as one of the permanent errors along with -EPERM that
>> usb_serial_generic_submit_read_urb() handles quietly without an error.
>>
>> Signed-off-by: Jeremiah Mahler <[email protected]>
>> Signed-off-by: Johan Hovold <[email protected]>
>> Signed-off-by: Sasha Levin <[email protected]>
>
>This isn't a bug fix, but more of a clean up patch and hence does not
>qualify for stable. So specifically the stable tag was left out on
>purpose.
>
>I never got a chance to talk to you in Edinburgh, but Greg mentioned you
>had an opt-out list for your autosel work which I'd like to be added to.
>
>I always mark bug fixes that qualify for stable as such so anything else
>that your process picks up would already have been considered and
>rejected by me.
I'll drop it, thanks Johan!
--
Thanks,
Sasha
On Fri, Oct 26, 2018 at 10:49:20AM +0200, Johan Hovold wrote:
>On Thu, Oct 25, 2018 at 10:17:19AM -0400, Sasha Levin wrote:
>> From: Bj?rn Mork <[email protected]>
>>
>> [ Upstream commit 59536da34513c594af2a6fd35ba65ea45b6960a1 ]
>>
>> The DEVICE_HWI type was added under the faulty assumption that Huawei
>> devices based on Qualcomm chipsets and firmware use the static USB
>> interface numbering known from Gobi devices. But this model does
>> not apply to Huawei devices like the HP branded lt4112 (Huawei me906e).
>> Huawei firmwares will dynamically assign interface numbers. Functions
>> are renumbered when the firmware is reconfigured.
>>
>> Fix by changing the DEVICE_HWI type to use a simplified version
>> of Huawei's subclass + protocol scheme: Blacklisting known network
>> interface combinations and assuming the rest are serial.
>>
>> Reported-and-tested-by: Muri Nicanor <[email protected]>
>> Tested-by: Martin Hauke <[email protected]>
>> Cc: <[email protected]>
>> Fixes: e7181d005e84 ("USB: qcserial: Add support for HP lt4112 LTE/HSPA+ Gobi 4G Modem")
>> Signed-off-by: Bj?rn Mork <[email protected]>
>> Signed-off-by: Johan Hovold <[email protected]>
>> Signed-off-by: Sasha Levin <[email protected]>
>
>This one is interesting though; it was marked for stable and has a
>proper fixes tag for a commit that went into 4.19. That patch in turn
>had a stable tag (new device id type patch) and was backported also to
>other active stable trees at the time.
>
>Guess the stable maintainers need to check if the offending patch has
>already been backported when determining how far back to apply a follow
>up fix.
>
>Note that the stable tag above lacks a version comment (e.g. "# 4.19"),
>but I can see how that may be too subtle to convey this (and not all
>maintainers use those). Perhaps an explicit comment should just be added
>in such cases.
Right, the whole "fix for a fix" issue is what this patch series tries
to address (you'll notice that *most* commits follow this pattern).
I'm not sure why Greg's tools missed it to begin with, but hopefully
this patch series will catch up with that.
--
Thanks,
Sasha