From: Masahisa Kojima <[email protected]>
[ Upstream commit 8d5b0bf611ec5b7618d5b772dddc93b8afa78cb8 ]
We observed that packets and bytes count are not reset
when user performs interface down. Eventually, tx queue is
exhausted and packets will not be sent out.
To avoid this problem, resets tx queue in ndo_stop.
Fixes: 533dd11a12f6 ("net: socionext: Add Synquacer NetSec driver")
Signed-off-by: Masahisa Kojima <[email protected]>
Signed-off-by: Yoshitoyo Osaki <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/socionext/netsec.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/net/ethernet/socionext/netsec.c b/drivers/net/ethernet/socionext/netsec.c
index 4289ccb26e4e..d2caeb9edc04 100644
--- a/drivers/net/ethernet/socionext/netsec.c
+++ b/drivers/net/ethernet/socionext/netsec.c
@@ -940,6 +940,9 @@ static void netsec_uninit_pkt_dring(struct netsec_priv *priv, int id)
dring->head = 0;
dring->tail = 0;
dring->pkt_cnt = 0;
+
+ if (id == NETSEC_RING_TX)
+ netdev_reset_queue(priv->ndev);
}
static void netsec_free_dring(struct netsec_priv *priv, int id)
--
2.17.1
From: Shaul Triebitz <[email protected]>
[ Upstream commit 868a1e863f95183f00809363fefba6d4f5bcd116 ]
If all free RB queues are empty, the driver will never restock the
free RB queue. That's because the restocking happens in the Rx flow,
and if the free queue is empty there will be no Rx.
Although there's a background worker (a.k.a. allocator) allocating
memory for RBs so that the Rx handler can restock them, the worker may
run only after the free queue has become empty (and then it is too
late for restocking as explained above).
There is a solution for that called 'emergency': If the number of used
RB's reaches half the amount of all RB's, the Rx handler will not wait
for the allocator but immediately allocate memory for the used RB's
and restock the free queue.
But, since the used RB's is per queue, it may happen that the used
RB's are spread between the queues such that the emergency check will
fail for each of the queues
(and still run out of RBs, causing the above symptom).
To fix it, move to emergency mode if the sum of *all* used RBs (for
all Rx queues) reaches half the amount of all RB's
Signed-off-by: Shaul Triebitz <[email protected]>
Signed-off-by: Luca Coelho <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/intel/iwlwifi/pcie/rx.c | 32 +++++++++++++-------
1 file changed, 21 insertions(+), 11 deletions(-)
diff --git a/drivers/net/wireless/intel/iwlwifi/pcie/rx.c b/drivers/net/wireless/intel/iwlwifi/pcie/rx.c
index d017aa2a0a8b..d4a31e014c82 100644
--- a/drivers/net/wireless/intel/iwlwifi/pcie/rx.c
+++ b/drivers/net/wireless/intel/iwlwifi/pcie/rx.c
@@ -1144,6 +1144,14 @@ void iwl_pcie_rx_free(struct iwl_trans *trans)
kfree(trans_pcie->rxq);
}
+static void iwl_pcie_rx_move_to_allocator(struct iwl_rxq *rxq,
+ struct iwl_rb_allocator *rba)
+{
+ spin_lock(&rba->lock);
+ list_splice_tail_init(&rxq->rx_used, &rba->rbd_empty);
+ spin_unlock(&rba->lock);
+}
+
/*
* iwl_pcie_rx_reuse_rbd - Recycle used RBDs
*
@@ -1175,9 +1183,7 @@ static void iwl_pcie_rx_reuse_rbd(struct iwl_trans *trans,
if ((rxq->used_count % RX_CLAIM_REQ_ALLOC) == RX_POST_REQ_ALLOC) {
/* Move the 2 RBDs to the allocator ownership.
Allocator has another 6 from pool for the request completion*/
- spin_lock(&rba->lock);
- list_splice_tail_init(&rxq->rx_used, &rba->rbd_empty);
- spin_unlock(&rba->lock);
+ iwl_pcie_rx_move_to_allocator(rxq, rba);
atomic_inc(&rba->req_pending);
queue_work(rba->alloc_wq, &rba->rx_alloc);
@@ -1396,10 +1402,18 @@ static void iwl_pcie_rx_handle(struct iwl_trans *trans, int queue)
IWL_DEBUG_RX(trans, "Q %d: HW = SW = %d\n", rxq->id, r);
while (i != r) {
+ struct iwl_rb_allocator *rba = &trans_pcie->rba;
struct iwl_rx_mem_buffer *rxb;
-
- if (unlikely(rxq->used_count == rxq->queue_size / 2))
+ /* number of RBDs still waiting for page allocation */
+ u32 rb_pending_alloc =
+ atomic_read(&trans_pcie->rba.req_pending) *
+ RX_CLAIM_REQ_ALLOC;
+
+ if (unlikely(rb_pending_alloc >= rxq->queue_size / 2 &&
+ !emergency)) {
+ iwl_pcie_rx_move_to_allocator(rxq, rba);
emergency = true;
+ }
rxb = iwl_pcie_get_rxb(trans, rxq, i);
if (!rxb)
@@ -1421,17 +1435,13 @@ static void iwl_pcie_rx_handle(struct iwl_trans *trans, int queue)
iwl_pcie_rx_allocator_get(trans, rxq);
if (rxq->used_count % RX_CLAIM_REQ_ALLOC == 0 && !emergency) {
- struct iwl_rb_allocator *rba = &trans_pcie->rba;
-
/* Add the remaining empty RBDs for allocator use */
- spin_lock(&rba->lock);
- list_splice_tail_init(&rxq->rx_used, &rba->rbd_empty);
- spin_unlock(&rba->lock);
+ iwl_pcie_rx_move_to_allocator(rxq, rba);
} else if (emergency) {
count++;
if (count == 8) {
count = 0;
- if (rxq->used_count < rxq->queue_size / 3)
+ if (rb_pending_alloc < rxq->queue_size / 3)
emergency = false;
rxq->read = i;
--
2.17.1
From: Rakesh Pillai <[email protected]>
[ Upstream commit 058a7eab9d9ee12f57282eb0b606668dada70d7a ]
The tx_status for management frames is being filled
incorrectly in the flags of skb_cb. This incorrect
flag setting causes the upper layers to consider that
the particular frame was not transmitted properly,
leading to improper behavior.
Set the IEEE80211_TX_STAT_ACK flag in the info flags
of skb_cb, to indicate the successful transmission of
the management frame.
Tested HW: WCN3990
Tested FW: WLAN.HL.2.0-01188-QCAHLSWMTPLZ-1
Fixes: dc405152bb64d4ae01c9ac669de25b2d1fb6fc2d
Signed-off-by: Rakesh Pillai <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/ath/ath10k/wmi.c | 7 ++++++-
1 file changed, 6 insertions(+), 1 deletion(-)
diff --git a/drivers/net/wireless/ath/ath10k/wmi.c b/drivers/net/wireless/ath/ath10k/wmi.c
index fd612d2905b0..1dced0dae9cd 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.c
+++ b/drivers/net/wireless/ath/ath10k/wmi.c
@@ -2336,7 +2336,12 @@ static int wmi_process_mgmt_tx_comp(struct ath10k *ar, u32 desc_id,
dma_unmap_single(ar->dev, pkt_addr->paddr,
msdu->len, DMA_FROM_DEVICE);
info = IEEE80211_SKB_CB(msdu);
- info->flags |= status;
+
+ if (status)
+ info->flags &= ~IEEE80211_TX_STAT_ACK;
+ else
+ info->flags |= IEEE80211_TX_STAT_ACK;
+
ieee80211_tx_status_irqsafe(ar->hw, msdu);
ret = 0;
--
2.17.1
From: Geert Uytterhoeven <[email protected]>
[ Upstream commit 697ee786f15d7b65c7f3045d45fe3a05d28e0911 ]
When testing bind/unbind on r8a7791/koelsch:
WARNING: CPU: 1 PID: 697 at lib/debugobjects.c:329 debug_print_object+0x8c/0xb4
ODEBUG: free active (active state 0) object type: timer_list hint: delayed_work_timer_fn+0x0/0x10
This happens if the workqueue runs after the device has been unbound.
Fix this by cancelling any queued work during remove.
Fixes: e0a5172e9eec7f0d ("thermal: rcar: add interrupt support")
Signed-off-by: Geert Uytterhoeven <[email protected]>
Reviewed-by: Niklas Söderlund <[email protected]>
Signed-off-by: Eduardo Valentin <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/thermal/rcar_thermal.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/thermal/rcar_thermal.c b/drivers/thermal/rcar_thermal.c
index 78f932822d38..8df2ce94c28d 100644
--- a/drivers/thermal/rcar_thermal.c
+++ b/drivers/thermal/rcar_thermal.c
@@ -453,6 +453,7 @@ static int rcar_thermal_remove(struct platform_device *pdev)
rcar_thermal_for_each_priv(priv, common) {
rcar_thermal_irq_disable(priv);
+ cancel_delayed_work_sync(&priv->work);
if (priv->chip->use_of_thermal)
thermal_remove_hwmon_sysfs(priv->zone);
else
--
2.17.1
From: James Smart <[email protected]>
[ Upstream commit 0ef01a2d95fd62bb4f536e7ce4d5e8e74b97a244 ]
When running an mds diagnostic that passes frames with the switch, soft
lockups are detected. The driver is in a CQE processing loop and has
sufficient amount of traffic that it never exits the ring processing routine,
thus the "lockup".
Cap the number of elements in the work processing routine to 64 elements. This
ensures that the cpu will be given up and the handler reschedule to process
additional items.
Signed-off-by: Dick Kennedy <[email protected]>
Signed-off-by: James Smart <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/scsi/lpfc/lpfc_sli.c | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c
index 9830bdb6e072..a95c823cd1a4 100644
--- a/drivers/scsi/lpfc/lpfc_sli.c
+++ b/drivers/scsi/lpfc/lpfc_sli.c
@@ -3797,6 +3797,7 @@ lpfc_sli_handle_slow_ring_event_s4(struct lpfc_hba *phba,
struct hbq_dmabuf *dmabuf;
struct lpfc_cq_event *cq_event;
unsigned long iflag;
+ int count = 0;
spin_lock_irqsave(&phba->hbalock, iflag);
phba->hba_flag &= ~HBA_SP_QUEUE_EVT;
@@ -3818,16 +3819,22 @@ lpfc_sli_handle_slow_ring_event_s4(struct lpfc_hba *phba,
if (irspiocbq)
lpfc_sli_sp_handle_rspiocb(phba, pring,
irspiocbq);
+ count++;
break;
case CQE_CODE_RECEIVE:
case CQE_CODE_RECEIVE_V1:
dmabuf = container_of(cq_event, struct hbq_dmabuf,
cq_event);
lpfc_sli4_handle_received_buffer(phba, dmabuf);
+ count++;
break;
default:
break;
}
+
+ /* Limit the number of events to 64 to avoid soft lockups */
+ if (count == 64)
+ break;
}
}
--
2.17.1
From: Vijay Immanuel <[email protected]>
[ Upstream commit b97db58557f4aa6d9903f8e1deea6b3d1ed0ba43 ]
Don't reset the resp opcode for a replayed read response.
The resp opcode could be in the middle of a write or send
sequence, when the duplicate read request was received.
An example sequence is as follows:
- Receive read request for 12KB PSN 20. Transmit read response
first, middle and last with PSNs 20,21,22.
- Receive write first PSN 23.
At this point the resp psn is 24 and resp opcode is write first.
- The sender notices that PSN 20 is dropped and retransmits.
Receive read request for 12KB PSN 20. Transmit read response
first, middle and last with PSNs 20,21,22. The resp opcode is
set to -1, the resp psn remains 24.
- Receive write first PSN 23. This is processed by duplicate_request().
The resp opcode remains -1 and resp psn remains 24.
- Receive write middle PSN 24. check_op_seq() reports a missing
first error since the resp opcode is -1.
When sending an ack for a duplicate send or write request,
use the psn of the previous ack sent. Do not use the psn
of a read response for the ack.
An example sequence is as follows:
- Receive write PSN 30. Transmit ACK for PSN 30.
- Receive read request 4KB PSN 31. Transmit read response with
PSN 31. The resp psn is now 32.
- The sender notices that PSN 30 is dropped and retransmits.
Receive write PSN 30. duplicate_request() sends an ACK with
PSN 31. That is incorrect since PSN 31 was a read request.
Signed-off-by: Vijay Immanuel <[email protected]>
Signed-off-by: Doug Ledford <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/infiniband/sw/rxe/rxe_resp.c | 8 ++++++--
drivers/infiniband/sw/rxe/rxe_verbs.h | 2 ++
2 files changed, 8 insertions(+), 2 deletions(-)
diff --git a/drivers/infiniband/sw/rxe/rxe_resp.c b/drivers/infiniband/sw/rxe/rxe_resp.c
index aa5833318372..fc6c880756da 100644
--- a/drivers/infiniband/sw/rxe/rxe_resp.c
+++ b/drivers/infiniband/sw/rxe/rxe_resp.c
@@ -682,6 +682,7 @@ static enum resp_states read_reply(struct rxe_qp *qp,
rxe_advance_resp_resource(qp);
res->type = RXE_READ_MASK;
+ res->replay = 0;
res->read.va = qp->resp.va;
res->read.va_org = qp->resp.va;
@@ -752,7 +753,8 @@ static enum resp_states read_reply(struct rxe_qp *qp,
state = RESPST_DONE;
} else {
qp->resp.res = NULL;
- qp->resp.opcode = -1;
+ if (!res->replay)
+ qp->resp.opcode = -1;
if (psn_compare(res->cur_psn, qp->resp.psn) >= 0)
qp->resp.psn = res->cur_psn;
state = RESPST_CLEANUP;
@@ -814,6 +816,7 @@ static enum resp_states execute(struct rxe_qp *qp, struct rxe_pkt_info *pkt)
/* next expected psn, read handles this separately */
qp->resp.psn = (pkt->psn + 1) & BTH_PSN_MASK;
+ qp->resp.ack_psn = qp->resp.psn;
qp->resp.opcode = pkt->opcode;
qp->resp.status = IB_WC_SUCCESS;
@@ -1065,7 +1068,7 @@ static enum resp_states duplicate_request(struct rxe_qp *qp,
struct rxe_pkt_info *pkt)
{
enum resp_states rc;
- u32 prev_psn = (qp->resp.psn - 1) & BTH_PSN_MASK;
+ u32 prev_psn = (qp->resp.ack_psn - 1) & BTH_PSN_MASK;
if (pkt->mask & RXE_SEND_MASK ||
pkt->mask & RXE_WRITE_MASK) {
@@ -1108,6 +1111,7 @@ static enum resp_states duplicate_request(struct rxe_qp *qp,
res->state = (pkt->psn == res->first_psn) ?
rdatm_res_state_new :
rdatm_res_state_replay;
+ res->replay = 1;
/* Reset the resource, except length. */
res->read.va_org = iova;
diff --git a/drivers/infiniband/sw/rxe/rxe_verbs.h b/drivers/infiniband/sw/rxe/rxe_verbs.h
index af1470d29391..332a16dad2a7 100644
--- a/drivers/infiniband/sw/rxe/rxe_verbs.h
+++ b/drivers/infiniband/sw/rxe/rxe_verbs.h
@@ -171,6 +171,7 @@ enum rdatm_res_state {
struct resp_res {
int type;
+ int replay;
u32 first_psn;
u32 last_psn;
u32 cur_psn;
@@ -195,6 +196,7 @@ struct rxe_resp_info {
enum rxe_qp_state state;
u32 msn;
u32 psn;
+ u32 ack_psn;
int opcode;
int drop_msg;
int goto_error;
--
2.17.1
> From: Sasha Levin <[email protected]>
> Sent: Wednesday, October 31, 2018 16:05
> To: [email protected]; [email protected]
> Cc: Dexuan Cui <[email protected]>; KY Srinivasan <[email protected]>;
> Haiyang Zhang <[email protected]>; Stephen Hemminger
> <[email protected]>; [email protected]; Greg Kroah-Hartman
> <[email protected]>; Sasha Levin <[email protected]>
> Subject: [PATCH AUTOSEL 4.19 109/146] Drivers: hv: kvp: Fix two "this
> statement may fall through" warnings
>
> From: Dexuan Cui <[email protected]>
>
> [ Upstream commit fc62c3b1977d62e6374fd6e28d371bb42dfa5c9d ]
>
> We don't need to call process_ib_ipinfo() if message->kvp_hdr.operation is
> KVP_OP_GET_IP_INFO in kvp_send_key(), because here we just need to pass
> on
> the op code from the host to the userspace; when the userspace returns
> the info requested by the host, we pass the info on to the host in
> kvp_respond_to_host() -> process_ob_ipinfo(). BTW, the current buggy code
> actually doesn't cause any harm, because only message->kvp_hdr.operation
> is used by the userspace, in the case of KVP_OP_GET_IP_INFO.
>
> The patch also adds a missing "break;" in kvp_send_key(). BTW, the current
> buggy code actually doesn't cause any harm, because in the case of
> KVP_OP_SET, the unexpected fall-through corrupts
> message->body.kvp_set.data.key_size, but that is not really used: see
> the definition of struct hv_kvp_exchg_msg_value.
>
> Signed-off-by: Dexuan Cui <[email protected]>
> Cc: K. Y. Srinivasan <[email protected]>
> Cc: Haiyang Zhang <[email protected]>
> Cc: Stephen Hemminger <[email protected]>
> Cc: <[email protected]>
> Signed-off-by: K. Y. Srinivasan <[email protected]>
> Signed-off-by: Greg Kroah-Hartman <[email protected]>
> Signed-off-by: Sasha Levin <[email protected]>
> ---
> drivers/hv/hv_kvp.c | 6 ++++--
> 1 file changed, 4 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/hv/hv_kvp.c b/drivers/hv/hv_kvp.c
> index 5eed1e7da15c..57715a0c8120 100644
> --- a/drivers/hv/hv_kvp.c
> +++ b/drivers/hv/hv_kvp.c
> @@ -353,7 +353,6 @@ static void process_ib_ipinfo(void *in_msg, void
> *out_msg, int op)
>
> out->body.kvp_ip_val.dhcp_enabled = in->kvp_ip_val.dhcp_enabled;
>
> - default:
> utf16s_to_utf8s((wchar_t *)in->kvp_ip_val.adapter_id,
> MAX_ADAPTER_ID_SIZE,
> UTF16_LITTLE_ENDIAN,
> @@ -406,7 +405,7 @@ kvp_send_key(struct work_struct *dummy)
> process_ib_ipinfo(in_msg, message, KVP_OP_SET_IP_INFO);
> break;
> case KVP_OP_GET_IP_INFO:
> - process_ib_ipinfo(in_msg, message, KVP_OP_GET_IP_INFO);
> + /* We only need to pass on message->kvp_hdr.operation. */
> break;
> case KVP_OP_SET:
> switch (in_msg->body.kvp_set.data.value_type) {
> @@ -446,6 +445,9 @@ kvp_send_key(struct work_struct *dummy)
> break;
>
> }
> +
> + break;
> +
> case KVP_OP_GET:
> message->body.kvp_set.data.key_size =
> utf16s_to_utf8s(
> --
> 2.17.1
This patch caused a regression and the fix (https://lkml.org/lkml/2018/10/18/288)
has not been in Greg's tree yet...
For now, please don't backport this patch to the stable kernels (4.19, 4.18, 4.14, 4.9, 4.4, 3.18,etc). Sorry for the trouble!
-- Dexuan
From: Takashi Iwai <[email protected]>
[ Upstream commit 78c9be61c3a5cd9e2439fd27a5ffad73a81958c7 ]
Introduce a new flag, uc_buffer, to indicate that the controller
requires the non-cached pages for stream buffers, either as a
chip-specific requirement or specified via snoop=0 option.
This improves the code-readability.
Also, this patch fixes the incorrect behavior for C-Media chip where
the stream buffers were never handled as non-cached due to the check
of driver_type even if you pass snoop=0 option.
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/pci/hda/hda_controller.h | 1 +
sound/pci/hda/hda_intel.c | 11 ++++++++---
2 files changed, 9 insertions(+), 3 deletions(-)
diff --git a/sound/pci/hda/hda_controller.h b/sound/pci/hda/hda_controller.h
index a68e75b00ea3..53c3cd28bc99 100644
--- a/sound/pci/hda/hda_controller.h
+++ b/sound/pci/hda/hda_controller.h
@@ -160,6 +160,7 @@ struct azx {
unsigned int msi:1;
unsigned int probing:1; /* codec probing phase */
unsigned int snoop:1;
+ unsigned int uc_buffer:1; /* non-cached pages for stream buffers */
unsigned int align_buffer_size:1;
unsigned int region_requested:1;
unsigned int disabled:1; /* disabled by vga_switcheroo */
diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c
index aa4c672dbaf7..e54e8a552111 100644
--- a/sound/pci/hda/hda_intel.c
+++ b/sound/pci/hda/hda_intel.c
@@ -412,7 +412,7 @@ static void __mark_pages_wc(struct azx *chip, struct snd_dma_buffer *dmab, bool
#ifdef CONFIG_SND_DMA_SGBUF
if (dmab->dev.type == SNDRV_DMA_TYPE_DEV_SG) {
struct snd_sg_buf *sgbuf = dmab->private_data;
- if (chip->driver_type == AZX_DRIVER_CMEDIA)
+ if (!chip->uc_buffer)
return; /* deal with only CORB/RIRB buffers */
if (on)
set_pages_array_wc(sgbuf->page_table, sgbuf->pages);
@@ -1678,6 +1678,7 @@ static void azx_check_snoop_available(struct azx *chip)
dev_info(chip->card->dev, "Force to %s mode by module option\n",
snoop ? "snoop" : "non-snoop");
chip->snoop = snoop;
+ chip->uc_buffer = !snoop;
return;
}
@@ -1698,8 +1699,12 @@ static void azx_check_snoop_available(struct azx *chip)
snoop = false;
chip->snoop = snoop;
- if (!snoop)
+ if (!snoop) {
dev_info(chip->card->dev, "Force to non-snoop mode\n");
+ /* C-Media requires non-cached pages only for CORB/RIRB */
+ if (chip->driver_type != AZX_DRIVER_CMEDIA)
+ chip->uc_buffer = true;
+ }
}
static void azx_probe_work(struct work_struct *work)
@@ -2138,7 +2143,7 @@ static void pcm_mmap_prepare(struct snd_pcm_substream *substream,
#ifdef CONFIG_X86
struct azx_pcm *apcm = snd_pcm_substream_chip(substream);
struct azx *chip = apcm->chip;
- if (!azx_snoop(chip) && chip->driver_type != AZX_DRIVER_CMEDIA)
+ if (chip->uc_buffer)
area->vm_page_prot = pgprot_writecombine(area->vm_page_prot);
#endif
}
--
2.17.1
From: Alexandre Belloni <[email protected]>
[ Upstream commit 9612f8f503804d2fd2f63aa6ba1e58bba4612d96 ]
The IRQ work is added before the struct rtc is allocated and registered,
but this struct is used in the IRQ handler. This may lead to a NULL pointer
dereference.
Switch to devm_rtc_allocate_device/rtc_register_device to allocate the rtc
before calling menelaus_add_irq_work.
Also, this solves a possible leak as the RTC is never released.
Signed-off-by: Alexandre Belloni <[email protected]>
Signed-off-by: Lee Jones <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/mfd/menelaus.c | 13 +++++++++----
1 file changed, 9 insertions(+), 4 deletions(-)
diff --git a/drivers/mfd/menelaus.c b/drivers/mfd/menelaus.c
index 29b7164a823b..d28ebe7ecd21 100644
--- a/drivers/mfd/menelaus.c
+++ b/drivers/mfd/menelaus.c
@@ -1094,6 +1094,7 @@ static void menelaus_rtc_alarm_work(struct menelaus_chip *m)
static inline void menelaus_rtc_init(struct menelaus_chip *m)
{
int alarm = (m->client->irq > 0);
+ int err;
/* assume 32KDETEN pin is pulled high */
if (!(menelaus_read_reg(MENELAUS_OSC_CTRL) & 0x80)) {
@@ -1101,6 +1102,12 @@ static inline void menelaus_rtc_init(struct menelaus_chip *m)
return;
}
+ m->rtc = devm_rtc_allocate_device(&m->client->dev);
+ if (IS_ERR(m->rtc))
+ return;
+
+ m->rtc->ops = &menelaus_rtc_ops;
+
/* support RTC alarm; it can issue wakeups */
if (alarm) {
if (menelaus_add_irq_work(MENELAUS_RTCALM_IRQ,
@@ -1125,10 +1132,8 @@ static inline void menelaus_rtc_init(struct menelaus_chip *m)
menelaus_write_reg(MENELAUS_RTC_CTRL, m->rtc_control);
}
- m->rtc = rtc_device_register(DRIVER_NAME,
- &m->client->dev,
- &menelaus_rtc_ops, THIS_MODULE);
- if (IS_ERR(m->rtc)) {
+ err = rtc_register_device(m->rtc);
+ if (err) {
if (alarm) {
menelaus_remove_irq_work(MENELAUS_RTCALM_IRQ);
device_init_wakeup(&m->client->dev, 0);
--
2.17.1
From: James Smart <[email protected]>
[ Upstream commit ca7fb76e091f889cfda1287c07a9358f73832b39 ]
On io completion, the driver is taking an adapter wide lock and nulling the
scsi command back pointer. The nulling of the back pointer is to signify the
io was completed and the scsi_done() routine was called. However, the routine
makes no check to see if the abort routine had done the same thing and
possibly nulled the pointer. Thus it may doubly-complete the io.
Make the following mods:
- Check to make sure forward progress (call scsi_done()) only happens if the
command pointer was non-null.
- As the taking of the lock, which is adapter wide, is very costly on a system
under load, null the pointer using an xchg operation rather than under lock.
Signed-off-by: Dick Kennedy <[email protected]>
Signed-off-by: James Smart <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/scsi/lpfc/lpfc_scsi.c | 14 +++++++++++---
1 file changed, 11 insertions(+), 3 deletions(-)
diff --git a/drivers/scsi/lpfc/lpfc_scsi.c b/drivers/scsi/lpfc/lpfc_scsi.c
index 5c7858e735c9..200b5bca1f5f 100644
--- a/drivers/scsi/lpfc/lpfc_scsi.c
+++ b/drivers/scsi/lpfc/lpfc_scsi.c
@@ -4158,9 +4158,17 @@ lpfc_scsi_cmd_iocb_cmpl(struct lpfc_hba *phba, struct lpfc_iocbq *pIocbIn,
}
lpfc_scsi_unprep_dma_buf(phba, lpfc_cmd);
- spin_lock_irqsave(&phba->hbalock, flags);
- lpfc_cmd->pCmd = NULL;
- spin_unlock_irqrestore(&phba->hbalock, flags);
+ /* If pCmd was set to NULL from abort path, do not call scsi_done */
+ if (xchg(&lpfc_cmd->pCmd, NULL) == NULL) {
+ lpfc_printf_vlog(vport, KERN_INFO, LOG_FCP,
+ "0711 FCP cmd already NULL, sid: 0x%06x, "
+ "did: 0x%06x, oxid: 0x%04x\n",
+ vport->fc_myDID,
+ (pnode) ? pnode->nlp_DID : 0,
+ phba->sli_rev == LPFC_SLI_REV4 ?
+ lpfc_cmd->cur_iocbq.sli4_xritag : 0xffff);
+ return;
+ }
/* The sdev is not guaranteed to be valid post scsi_done upcall. */
cmd->scsi_done(cmd);
--
2.17.1
From: Paul Cercueil <[email protected]>
[ Upstream commit 54f919a04cf221bc1601d1193682d4379dacacbd ]
The driver calls clk_get() with the clock name set to NULL, which means
that the driver could only work when probed from devicetree. From now
on, we explicitly require the driver to be probed from devicetree.
Signed-off-by: Paul Cercueil <[email protected]>
Tested-by: Mathieu Malaterre <[email protected]>
Signed-off-by: Vinod Koul <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/dma/dma-jz4780.c | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/drivers/dma/dma-jz4780.c b/drivers/dma/dma-jz4780.c
index 85820a2d69d4..987899610b46 100644
--- a/drivers/dma/dma-jz4780.c
+++ b/drivers/dma/dma-jz4780.c
@@ -761,6 +761,11 @@ static int jz4780_dma_probe(struct platform_device *pdev)
struct resource *res;
int i, ret;
+ if (!dev->of_node) {
+ dev_err(dev, "This driver must be probed from devicetree\n");
+ return -EINVAL;
+ }
+
jzdma = devm_kzalloc(dev, sizeof(*jzdma), GFP_KERNEL);
if (!jzdma)
return -ENOMEM;
--
2.17.1
From: "Eric W. Biederman" <[email protected]>
[ Upstream commit 3597dfe01d12f570bc739da67f857fd222a3ea66 ]
Instead of playing whack-a-mole and changing SEND_SIG_PRIV to
SEND_SIG_FORCED throughout the kernel to ensure a pid namespace init
gets signals sent by the kernel, stop allowing a pid namespace init to
ignore SIGKILL or SIGSTOP sent by the kernel. A pid namespace init is
only supposed to be able to ignore signals sent from itself and
children with SIG_DFL.
Fixes: 921cf9f63089 ("signals: protect cinit from unblocked SIG_DFL signals")
Reviewed-by: Thomas Gleixner <[email protected]>
Signed-off-by: "Eric W. Biederman" <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
kernel/signal.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/kernel/signal.c b/kernel/signal.c
index e4aad0e90882..092fb48ed845 100644
--- a/kernel/signal.c
+++ b/kernel/signal.c
@@ -1035,7 +1035,7 @@ static int __send_signal(int sig, struct siginfo *info, struct task_struct *t,
result = TRACE_SIGNAL_IGNORED;
if (!prepare_signal(sig, t,
- from_ancestor_ns || (info == SEND_SIG_FORCED)))
+ from_ancestor_ns || (info == SEND_SIG_PRIV) || (info == SEND_SIG_FORCED)))
goto ret;
pending = (type != PIDTYPE_PID) ? &t->signal->shared_pending : &t->pending;
--
2.17.1
From: Moni Shoua <[email protected]>
[ Upstream commit 99ed748e878a99c6c7b87bbec063eefd9e47cb42 ]
The transition is allowed from any state and the atrribute mask must be
IB_QP_STATE.
Fixes: c32a4f296e1d ("IB/mlx5: Add support for DC Initiator QP")
Signed-off-by: Moni Shoua <[email protected]>
Reviewed-by: Artemy Kovalyov <[email protected]>
Signed-off-by: Leon Romanovsky <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/infiniband/hw/mlx5/qp.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/infiniband/hw/mlx5/qp.c b/drivers/infiniband/hw/mlx5/qp.c
index 6cba2a02d11b..d53d954ac8af 100644
--- a/drivers/infiniband/hw/mlx5/qp.c
+++ b/drivers/infiniband/hw/mlx5/qp.c
@@ -3243,7 +3243,9 @@ static bool modify_dci_qp_is_ok(enum ib_qp_state cur_state, enum ib_qp_state new
int req = IB_QP_STATE;
int opt = 0;
- if (cur_state == IB_QPS_RESET && new_state == IB_QPS_INIT) {
+ if (new_state == IB_QPS_RESET) {
+ return is_valid_mask(attr_mask, req, opt);
+ } else if (cur_state == IB_QPS_RESET && new_state == IB_QPS_INIT) {
req |= IB_QP_PKEY_INDEX | IB_QP_PORT;
return is_valid_mask(attr_mask, req, opt);
} else if (cur_state == IB_QPS_INIT && new_state == IB_QPS_INIT) {
--
2.17.1
From: Alexandre Belloni <[email protected]>
[ Upstream commit ae61cf5b9913027c6953a79ed3894da4f47061bd ]
When both uio and the uio drivers are built in the kernel, it is possible
for a driver to register devices before the uio class is registered.
This may result in a NULL pointer dereference later on in
get_device_parent() when accessing the class glue_dirs spinlock.
The trace looks like that:
Unable to handle kernel NULL pointer dereference at virtual address 00000140
[...]
[<ffff0000089cc234>] _raw_spin_lock+0x14/0x48
[<ffff0000084f56bc>] device_add+0x154/0x6a0
[<ffff0000084f5e48>] device_create_groups_vargs+0x120/0x128
[<ffff0000084f5edc>] device_create+0x54/0x60
[<ffff0000086e72c0>] __uio_register_device+0x120/0x4a8
[<ffff000008528b7c>] jaguar2_pci_probe+0x2d4/0x558
[<ffff0000083fc18c>] local_pci_probe+0x3c/0xb8
[<ffff0000083fd81c>] pci_device_probe+0x11c/0x180
[<ffff0000084f88bc>] driver_probe_device+0x22c/0x2d8
[<ffff0000084f8a24>] __driver_attach+0xbc/0xc0
[<ffff0000084f69fc>] bus_for_each_dev+0x4c/0x98
[<ffff0000084f81b8>] driver_attach+0x20/0x28
[<ffff0000084f7d08>] bus_add_driver+0x1b8/0x228
[<ffff0000084f93c0>] driver_register+0x60/0xf8
[<ffff0000083fb918>] __pci_register_driver+0x40/0x48
Return EPROBE_DEFER in that case so the driver can register the device
later.
Signed-off-by: Alexandre Belloni <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/uio/uio.c | 9 +++++++++
1 file changed, 9 insertions(+)
diff --git a/drivers/uio/uio.c b/drivers/uio/uio.c
index 70a7981b94b3..9916edda5271 100644
--- a/drivers/uio/uio.c
+++ b/drivers/uio/uio.c
@@ -274,6 +274,8 @@ static struct class uio_class = {
.dev_groups = uio_groups,
};
+bool uio_class_registered;
+
/*
* device functions
*/
@@ -876,6 +878,9 @@ static int init_uio_class(void)
printk(KERN_ERR "class_register failed for uio\n");
goto err_class_register;
}
+
+ uio_class_registered = true;
+
return 0;
err_class_register:
@@ -886,6 +891,7 @@ static int init_uio_class(void)
static void release_uio_class(void)
{
+ uio_class_registered = false;
class_unregister(&uio_class);
uio_major_cleanup();
}
@@ -912,6 +918,9 @@ int __uio_register_device(struct module *owner,
struct uio_device *idev;
int ret = 0;
+ if (!uio_class_registered)
+ return -EPROBE_DEFER;
+
if (!parent || !info || !info->name || !info->version)
return -EINVAL;
--
2.17.1
From: Arseny Maslennikov <[email protected]>
[ Upstream commit 9b8b2a323008aedd39a8debb861b825707f01420 ]
Some InfiniBand network devices have multiple ports on the same PCI
function. This initializes the `dev_port' sysfs field of those
network interfaces with their port number.
Prior to this the kernel erroneously used the `dev_id' sysfs
field of those network interfaces to convey the port number to userspace.
The use of `dev_id' was considered correct until Linux 3.15,
when another field, `dev_port', was defined for this particular
purpose and `dev_id' was reserved for distinguishing stacked ifaces
(e.g: VLANs) with the same hardware address as their parent device.
Similar fixes to net/mlx4_en and many other drivers, which started
exporting this information through `dev_id' before 3.15, were accepted
into the kernel 4 years ago.
See 76a066f2a2a0 (`net/mlx4_en: Expose port number through sysfs').
Signed-off-by: Arseny Maslennikov <[email protected]>
Signed-off-by: Doug Ledford <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/infiniband/ulp/ipoib/ipoib_main.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/infiniband/ulp/ipoib/ipoib_main.c b/drivers/infiniband/ulp/ipoib/ipoib_main.c
index e3d28f9ad9c0..30f840f874b3 100644
--- a/drivers/infiniband/ulp/ipoib/ipoib_main.c
+++ b/drivers/infiniband/ulp/ipoib/ipoib_main.c
@@ -1880,6 +1880,8 @@ static int ipoib_parent_init(struct net_device *ndev)
sizeof(union ib_gid));
SET_NETDEV_DEV(priv->dev, priv->ca->dev.parent);
+ priv->dev->dev_port = priv->port - 1;
+ /* Let's set this one too for backwards compatibility. */
priv->dev->dev_id = priv->port - 1;
return 0;
--
2.17.1
From: Akshu Agrawal <[email protected]>
[ Upstream commit c50535ed6a10fcae1b64ae83c0f6b1eeb5535afc ]
alsa_conformance_test -C hw:0,4 -p 1024 --debug
would sometime show:
TIME_DIFF(s) HW_LEVEL READ RATE
0.000095970 1024 1024 10670001.041992
0.042609555 1024 2048 24032.168372
0.021330364 1024 3072 48006.681930
0.021339559 1024 4096 47985.996337
The issue is that in dma pointer function we can have stale value
of the register for current descriptor of channel.
The register retains the number of the last descriptor that
was transferred.
Fix ensures that we report position, 0, till the one period worth of
data is transferred. After one period of data, in handler of period
completion interrupt we update the config and correct value of descriptor
starts reflecting.
Signed-off-by: Akshu Agrawal <[email protected]>
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/soc/amd/acp-pcm-dma.c | 22 ++++++++++++++--------
1 file changed, 14 insertions(+), 8 deletions(-)
diff --git a/sound/soc/amd/acp-pcm-dma.c b/sound/soc/amd/acp-pcm-dma.c
index 77b265bd0505..3135e9eafd18 100644
--- a/sound/soc/amd/acp-pcm-dma.c
+++ b/sound/soc/amd/acp-pcm-dma.c
@@ -1036,16 +1036,22 @@ static snd_pcm_uframes_t acp_dma_pointer(struct snd_pcm_substream *substream)
if (substream->stream == SNDRV_PCM_STREAM_CAPTURE) {
period_bytes = frames_to_bytes(runtime, runtime->period_size);
- dscr = acp_reg_read(rtd->acp_mmio, rtd->dma_curr_dscr);
- if (dscr == rtd->dma_dscr_idx_1)
- pos = period_bytes;
- else
- pos = 0;
bytescount = acp_get_byte_count(rtd);
- if (bytescount > rtd->bytescount)
+ if (bytescount >= rtd->bytescount)
bytescount -= rtd->bytescount;
- delay = do_div(bytescount, period_bytes);
- runtime->delay = bytes_to_frames(runtime, delay);
+ if (bytescount < period_bytes) {
+ pos = 0;
+ } else {
+ dscr = acp_reg_read(rtd->acp_mmio, rtd->dma_curr_dscr);
+ if (dscr == rtd->dma_dscr_idx_1)
+ pos = period_bytes;
+ else
+ pos = 0;
+ }
+ if (bytescount > 0) {
+ delay = do_div(bytescount, period_bytes);
+ runtime->delay = bytes_to_frames(runtime, delay);
+ }
} else {
buffersize = frames_to_bytes(runtime, runtime->buffer_size);
bytescount = acp_get_byte_count(rtd);
--
2.17.1
From: Waiman Long <[email protected]>
[ Upstream commit cfb03be6c7e8a1591285849c361d67b09f5149f7 ]
The following lockdep splat was observed:
[ 1222.241750] ======================================================
[ 1222.271301] WARNING: possible circular locking dependency detected
[ 1222.301060] 4.16.0-10.el8+5.x86_64+debug #1 Not tainted
[ 1222.326659] ------------------------------------------------------
[ 1222.356565] systemd-shutdow/1 is trying to acquire lock:
[ 1222.382660] ((&ioat_chan->timer)){+.-.}, at: [<00000000f71e1a28>] del_timer_sync+0x5/0xf0
[ 1222.422928]
[ 1222.422928] but task is already holding lock:
[ 1222.451743] (&(&ioat_chan->prep_lock)->rlock){+.-.}, at: [<000000008ea98b12>] ioat_shutdown+0x86/0x100 [ioatdma]
:
[ 1223.524987] Chain exists of:
[ 1223.524987] (&ioat_chan->timer) --> &(&ioat_chan->cleanup_lock)->rlock --> &(&ioat_chan->prep_lock)->rlock
[ 1223.524987]
[ 1223.594082] Possible unsafe locking scenario:
[ 1223.594082]
[ 1223.622630] CPU0 CPU1
[ 1223.645080] ---- ----
[ 1223.667404] lock(&(&ioat_chan->prep_lock)->rlock);
[ 1223.691535] lock(&(&ioat_chan->cleanup_lock)->rlock);
[ 1223.728657] lock(&(&ioat_chan->prep_lock)->rlock);
[ 1223.765122] lock((&ioat_chan->timer));
[ 1223.784095]
[ 1223.784095] *** DEADLOCK ***
[ 1223.784095]
[ 1223.813492] 4 locks held by systemd-shutdow/1:
[ 1223.834677] #0: (reboot_mutex){+.+.}, at: [<0000000056d33456>] SYSC_reboot+0x10f/0x300
[ 1223.873310] #1: (&dev->mutex){....}, at: [<00000000258dfdd7>] device_shutdown+0x1c8/0x660
[ 1223.913604] #2: (&dev->mutex){....}, at: [<0000000068331147>] device_shutdown+0x1d6/0x660
[ 1223.954000] #3: (&(&ioat_chan->prep_lock)->rlock){+.-.}, at: [<000000008ea98b12>] ioat_shutdown+0x86/0x100 [ioatdma]
In the ioat_shutdown() function:
spin_lock_bh(&ioat_chan->prep_lock);
set_bit(IOAT_CHAN_DOWN, &ioat_chan->state);
del_timer_sync(&ioat_chan->timer);
spin_unlock_bh(&ioat_chan->prep_lock);
According to the synchronization rule for the del_timer_sync() function,
the caller must not hold locks which would prevent completion of the
timer's handler.
The timer structure has its own lock that manages its synchronization.
Setting the IOAT_CHAN_DOWN bit should prevent other CPUs from
trying to use that device anyway, there is probably no need to call
del_timer_sync() while holding the prep_lock. So the del_timer_sync()
call is now moved outside of the prep_lock critical section to prevent
the circular lock dependency.
Signed-off-by: Waiman Long <[email protected]>
Reviewed-by: Dave Jiang <[email protected]>
Signed-off-by: Vinod Koul <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/dma/ioat/init.c | 9 ++++++++-
1 file changed, 8 insertions(+), 1 deletion(-)
diff --git a/drivers/dma/ioat/init.c b/drivers/dma/ioat/init.c
index 4fa4c06c9edb..21a5708985bc 100644
--- a/drivers/dma/ioat/init.c
+++ b/drivers/dma/ioat/init.c
@@ -1205,8 +1205,15 @@ static void ioat_shutdown(struct pci_dev *pdev)
spin_lock_bh(&ioat_chan->prep_lock);
set_bit(IOAT_CHAN_DOWN, &ioat_chan->state);
- del_timer_sync(&ioat_chan->timer);
spin_unlock_bh(&ioat_chan->prep_lock);
+ /*
+ * Synchronization rule for del_timer_sync():
+ * - The caller must not hold locks which would prevent
+ * completion of the timer's handler.
+ * So prep_lock cannot be held before calling it.
+ */
+ del_timer_sync(&ioat_chan->timer);
+
/* this should quiesce then reset */
ioat_reset_hw(ioat_chan);
}
--
2.17.1
From: Loic Poulain <[email protected]>
[ Upstream commit 8b97d73c4d72a2abf58f8e49062a7ee1e5f1334e ]
The ChipIdea IRQ is disabled before scheduling the otg work and
re-enabled on otg work completion. However if the job is already
scheduled we have to undo the effect of disable_irq int order to
balance the IRQ disable-depth value.
Fixes: be6b0c1bd0be ("usb: chipidea: using one inline function to cover queue work operations")
Signed-off-by: Loic Poulain <[email protected]>
Signed-off-by: Peter Chen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/usb/chipidea/otg.h | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/usb/chipidea/otg.h b/drivers/usb/chipidea/otg.h
index 7e7428e48bfa..4f8b8179ec96 100644
--- a/drivers/usb/chipidea/otg.h
+++ b/drivers/usb/chipidea/otg.h
@@ -17,7 +17,8 @@ void ci_handle_vbus_change(struct ci_hdrc *ci);
static inline void ci_otg_queue_work(struct ci_hdrc *ci)
{
disable_irq_nosync(ci->irq);
- queue_work(ci->wq, &ci->work);
+ if (queue_work(ci->wq, &ci->work) == false)
+ enable_irq(ci->irq);
}
#endif /* __DRIVERS_USB_CHIPIDEA_OTG_H */
--
2.17.1
From: Zhikang Zhang <[email protected]>
[ Upstream commit b430f7263673eab1dc40e662ae3441a9619d16b8 ]
In the call trace below, we might sleep in function dput().
So in order to avoid sleeping under spin_lock, we remove f2fs_mark_inode_dirty_sync
from __try_update_largest_extent && __drop_largest_extent.
BUG: sleeping function called from invalid context at fs/dcache.c:796
Call trace:
dump_backtrace+0x0/0x3f4
show_stack+0x24/0x30
dump_stack+0xe0/0x138
___might_sleep+0x2a8/0x2c8
__might_sleep+0x78/0x10c
dput+0x7c/0x750
block_dump___mark_inode_dirty+0x120/0x17c
__mark_inode_dirty+0x344/0x11f0
f2fs_mark_inode_dirty_sync+0x40/0x50
__insert_extent_tree+0x2e0/0x2f4
f2fs_update_extent_tree_range+0xcf4/0xde8
f2fs_update_extent_cache+0x114/0x12c
f2fs_update_data_blkaddr+0x40/0x50
write_data_page+0x150/0x314
do_write_data_page+0x648/0x2318
__write_data_page+0xdb4/0x1640
f2fs_write_cache_pages+0x768/0xafc
__f2fs_write_data_pages+0x590/0x1218
f2fs_write_data_pages+0x64/0x74
do_writepages+0x74/0xe4
__writeback_single_inode+0xdc/0x15f0
writeback_sb_inodes+0x574/0xc98
__writeback_inodes_wb+0x190/0x204
wb_writeback+0x730/0xf14
wb_check_old_data_flush+0x1bc/0x1c8
wb_workfn+0x554/0xf74
process_one_work+0x440/0x118c
worker_thread+0xac/0x974
kthread+0x1a0/0x1c8
ret_from_fork+0x10/0x1c
Signed-off-by: Zhikang Zhang <[email protected]>
Reviewed-by: Chao Yu <[email protected]>
Signed-off-by: Jaegeuk Kim <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/f2fs/extent_cache.c | 51 ++++++++++++++++++++++++++----------------
fs/f2fs/f2fs.h | 7 +++---
2 files changed, 36 insertions(+), 22 deletions(-)
diff --git a/fs/f2fs/extent_cache.c b/fs/f2fs/extent_cache.c
index 231b77ef5a53..a70cd2580eae 100644
--- a/fs/f2fs/extent_cache.c
+++ b/fs/f2fs/extent_cache.c
@@ -308,14 +308,13 @@ static unsigned int __free_extent_tree(struct f2fs_sb_info *sbi,
return count - atomic_read(&et->node_cnt);
}
-static void __drop_largest_extent(struct inode *inode,
+static void __drop_largest_extent(struct extent_tree *et,
pgoff_t fofs, unsigned int len)
{
- struct extent_info *largest = &F2FS_I(inode)->extent_tree->largest;
-
- if (fofs < largest->fofs + largest->len && fofs + len > largest->fofs) {
- largest->len = 0;
- f2fs_mark_inode_dirty_sync(inode, true);
+ if (fofs < et->largest.fofs + et->largest.len &&
+ fofs + len > et->largest.fofs) {
+ et->largest.len = 0;
+ et->largest_updated = true;
}
}
@@ -416,12 +415,11 @@ static bool f2fs_lookup_extent_tree(struct inode *inode, pgoff_t pgofs,
return ret;
}
-static struct extent_node *__try_merge_extent_node(struct inode *inode,
+static struct extent_node *__try_merge_extent_node(struct f2fs_sb_info *sbi,
struct extent_tree *et, struct extent_info *ei,
struct extent_node *prev_ex,
struct extent_node *next_ex)
{
- struct f2fs_sb_info *sbi = F2FS_I_SB(inode);
struct extent_node *en = NULL;
if (prev_ex && __is_back_mergeable(ei, &prev_ex->ei)) {
@@ -443,7 +441,7 @@ static struct extent_node *__try_merge_extent_node(struct inode *inode,
if (!en)
return NULL;
- __try_update_largest_extent(inode, et, en);
+ __try_update_largest_extent(et, en);
spin_lock(&sbi->extent_lock);
if (!list_empty(&en->list)) {
@@ -454,12 +452,11 @@ static struct extent_node *__try_merge_extent_node(struct inode *inode,
return en;
}
-static struct extent_node *__insert_extent_tree(struct inode *inode,
+static struct extent_node *__insert_extent_tree(struct f2fs_sb_info *sbi,
struct extent_tree *et, struct extent_info *ei,
struct rb_node **insert_p,
struct rb_node *insert_parent)
{
- struct f2fs_sb_info *sbi = F2FS_I_SB(inode);
struct rb_node **p;
struct rb_node *parent = NULL;
struct extent_node *en = NULL;
@@ -476,7 +473,7 @@ static struct extent_node *__insert_extent_tree(struct inode *inode,
if (!en)
return NULL;
- __try_update_largest_extent(inode, et, en);
+ __try_update_largest_extent(et, en);
/* update in global extent list */
spin_lock(&sbi->extent_lock);
@@ -497,6 +494,7 @@ static void f2fs_update_extent_tree_range(struct inode *inode,
struct rb_node **insert_p = NULL, *insert_parent = NULL;
unsigned int end = fofs + len;
unsigned int pos = (unsigned int)fofs;
+ bool updated = false;
if (!et)
return;
@@ -517,7 +515,7 @@ static void f2fs_update_extent_tree_range(struct inode *inode,
* drop largest extent before lookup, in case it's already
* been shrunk from extent tree
*/
- __drop_largest_extent(inode, fofs, len);
+ __drop_largest_extent(et, fofs, len);
/* 1. lookup first extent node in range [fofs, fofs + len - 1] */
en = (struct extent_node *)f2fs_lookup_rb_tree_ret(&et->root,
@@ -550,7 +548,7 @@ static void f2fs_update_extent_tree_range(struct inode *inode,
set_extent_info(&ei, end,
end - dei.fofs + dei.blk,
org_end - end);
- en1 = __insert_extent_tree(inode, et, &ei,
+ en1 = __insert_extent_tree(sbi, et, &ei,
NULL, NULL);
next_en = en1;
} else {
@@ -570,7 +568,7 @@ static void f2fs_update_extent_tree_range(struct inode *inode,
}
if (parts)
- __try_update_largest_extent(inode, et, en);
+ __try_update_largest_extent(et, en);
else
__release_extent_node(sbi, et, en);
@@ -590,15 +588,16 @@ static void f2fs_update_extent_tree_range(struct inode *inode,
if (blkaddr) {
set_extent_info(&ei, fofs, blkaddr, len);
- if (!__try_merge_extent_node(inode, et, &ei, prev_en, next_en))
- __insert_extent_tree(inode, et, &ei,
+ if (!__try_merge_extent_node(sbi, et, &ei, prev_en, next_en))
+ __insert_extent_tree(sbi, et, &ei,
insert_p, insert_parent);
/* give up extent_cache, if split and small updates happen */
if (dei.len >= 1 &&
prev.len < F2FS_MIN_EXTENT_LEN &&
et->largest.len < F2FS_MIN_EXTENT_LEN) {
- __drop_largest_extent(inode, 0, UINT_MAX);
+ et->largest.len = 0;
+ et->largest_updated = true;
set_inode_flag(inode, FI_NO_EXTENT);
}
}
@@ -606,7 +605,15 @@ static void f2fs_update_extent_tree_range(struct inode *inode,
if (is_inode_flag_set(inode, FI_NO_EXTENT))
__free_extent_tree(sbi, et);
+ if (et->largest_updated) {
+ et->largest_updated = false;
+ updated = true;
+ }
+
write_unlock(&et->lock);
+
+ if (updated)
+ f2fs_mark_inode_dirty_sync(inode, true);
}
unsigned int f2fs_shrink_extent_tree(struct f2fs_sb_info *sbi, int nr_shrink)
@@ -705,6 +712,7 @@ void f2fs_drop_extent_tree(struct inode *inode)
{
struct f2fs_sb_info *sbi = F2FS_I_SB(inode);
struct extent_tree *et = F2FS_I(inode)->extent_tree;
+ bool updated = false;
if (!f2fs_may_extent_tree(inode))
return;
@@ -713,8 +721,13 @@ void f2fs_drop_extent_tree(struct inode *inode)
write_lock(&et->lock);
__free_extent_tree(sbi, et);
- __drop_largest_extent(inode, 0, UINT_MAX);
+ if (et->largest.len) {
+ et->largest.len = 0;
+ updated = true;
+ }
write_unlock(&et->lock);
+ if (updated)
+ f2fs_mark_inode_dirty_sync(inode, true);
}
void f2fs_destroy_extent_tree(struct inode *inode)
diff --git a/fs/f2fs/f2fs.h b/fs/f2fs/f2fs.h
index abf925664d9c..e146e6c443e8 100644
--- a/fs/f2fs/f2fs.h
+++ b/fs/f2fs/f2fs.h
@@ -572,6 +572,7 @@ struct extent_tree {
struct list_head list; /* to be used by sbi->zombie_list */
rwlock_t lock; /* protect extent info rb-tree */
atomic_t node_cnt; /* # of extent node in rb-tree*/
+ bool largest_updated; /* largest extent updated */
};
/*
@@ -754,12 +755,12 @@ static inline bool __is_front_mergeable(struct extent_info *cur,
}
extern void f2fs_mark_inode_dirty_sync(struct inode *inode, bool sync);
-static inline void __try_update_largest_extent(struct inode *inode,
- struct extent_tree *et, struct extent_node *en)
+static inline void __try_update_largest_extent(struct extent_tree *et,
+ struct extent_node *en)
{
if (en->ei.len > et->largest.len) {
et->largest = en->ei;
- f2fs_mark_inode_dirty_sync(inode, true);
+ et->largest_updated = true;
}
}
--
2.17.1
From: Chao Yu <[email protected]>
[ Upstream commit 1378752b9921e60749eaf18ec6c47b33f9001abb ]
generic/417 reported as blow:
------------[ cut here ]------------
kernel BUG at /home/yuchao/git/devf2fs/inode.c:695!
invalid opcode: 0000 [#1] PREEMPT SMP
CPU: 1 PID: 21697 Comm: umount Tainted: G W O 4.18.0-rc2+ #39
Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006
EIP: f2fs_evict_inode+0x556/0x580 [f2fs]
Call Trace:
? _raw_spin_unlock+0x2c/0x50
evict+0xa8/0x170
dispose_list+0x34/0x40
evict_inodes+0x118/0x120
generic_shutdown_super+0x41/0x100
? rcu_read_lock_sched_held+0x97/0xa0
kill_block_super+0x22/0x50
kill_f2fs_super+0x6f/0x80 [f2fs]
deactivate_locked_super+0x3d/0x70
deactivate_super+0x40/0x60
cleanup_mnt+0x39/0x70
__cleanup_mnt+0x10/0x20
task_work_run+0x81/0xa0
exit_to_usermode_loop+0x59/0xa7
do_fast_syscall_32+0x1f5/0x22c
entry_SYSENTER_32+0x53/0x86
EIP: f2fs_evict_inode+0x556/0x580 [f2fs]
It can simply reproduced with scripts:
Enable quota feature during mkfs.
Testcase1:
1. mkfs.f2fs /dev/zram0
2. mount -t f2fs /dev/zram0 /mnt/f2fs
3. xfs_io -f /mnt/f2fs/file -c "pwrite 0 4k" -c "fsync"
4. godown /mnt/f2fs
5. umount /mnt/f2fs
6. mount -t f2fs -o ro /dev/zram0 /mnt/f2fs
7. umount /mnt/f2fs
Testcase2:
1. mkfs.f2fs /dev/zram0
2. mount -t f2fs /dev/zram0 /mnt/f2fs
3. touch /mnt/f2fs/file
4. create process[pid = x] do:
a) open /mnt/f2fs/file;
b) unlink /mnt/f2fs/file
5. godown -f /mnt/f2fs
6. kill process[pid = x]
7. umount /mnt/f2fs
8. mount -t f2fs -o ro /dev/zram0 /mnt/f2fs
9. umount /mnt/f2fs
The reason is: during recovery, i_{c,m}time of inode will be updated, then
the inode can be set dirty w/o being tracked in sbi->inode_list[DIRTY_META]
global list, so later write_checkpoint will not flush such dirty inode into
node page.
Once umount is called, sync_filesystem() in generic_shutdown_super() will
skip syncng dirty inodes due to sb_rdonly check, leaving dirty inodes
there.
To solve this issue, during umount, add remove SB_RDONLY flag in
sb->s_flags, to make sure sync_filesystem() will not be skipped.
Signed-off-by: Chao Yu <[email protected]>
Signed-off-by: Jaegeuk Kim <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/f2fs/checkpoint.c | 2 ++
fs/f2fs/f2fs.h | 1 +
fs/f2fs/recovery.c | 14 +++++++++-----
fs/f2fs/super.c | 3 +++
4 files changed, 15 insertions(+), 5 deletions(-)
diff --git a/fs/f2fs/checkpoint.c b/fs/f2fs/checkpoint.c
index e8b6b89bddb8..59d0472013f4 100644
--- a/fs/f2fs/checkpoint.c
+++ b/fs/f2fs/checkpoint.c
@@ -696,6 +696,8 @@ int f2fs_recover_orphan_inodes(struct f2fs_sb_info *sbi)
/* clear Orphan Flag */
clear_ckpt_flags(sbi, CP_ORPHAN_PRESENT_FLAG);
out:
+ set_sbi_flag(sbi, SBI_IS_RECOVERED);
+
#ifdef CONFIG_QUOTA
/* Turn quotas off */
if (quota_enabled)
diff --git a/fs/f2fs/f2fs.h b/fs/f2fs/f2fs.h
index e146e6c443e8..ecb735142276 100644
--- a/fs/f2fs/f2fs.h
+++ b/fs/f2fs/f2fs.h
@@ -1089,6 +1089,7 @@ enum {
SBI_NEED_SB_WRITE, /* need to recover superblock */
SBI_NEED_CP, /* need to checkpoint */
SBI_IS_SHUTDOWN, /* shutdown by ioctl */
+ SBI_IS_RECOVERED, /* recovered orphan/data */
};
enum {
diff --git a/fs/f2fs/recovery.c b/fs/f2fs/recovery.c
index 12a3293bcbc9..9a8579fb3a30 100644
--- a/fs/f2fs/recovery.c
+++ b/fs/f2fs/recovery.c
@@ -698,11 +698,15 @@ int f2fs_recover_fsync_data(struct f2fs_sb_info *sbi, bool check_only)
/* let's drop all the directory inodes for clean checkpoint */
destroy_fsync_dnodes(&dir_list);
- if (!err && need_writecp) {
- struct cp_control cpc = {
- .reason = CP_RECOVERY,
- };
- err = f2fs_write_checkpoint(sbi, &cpc);
+ if (need_writecp) {
+ set_sbi_flag(sbi, SBI_IS_RECOVERED);
+
+ if (!err) {
+ struct cp_control cpc = {
+ .reason = CP_RECOVERY,
+ };
+ err = f2fs_write_checkpoint(sbi, &cpc);
+ }
}
kmem_cache_destroy(fsync_entry_slab);
diff --git a/fs/f2fs/super.c b/fs/f2fs/super.c
index d0d016f21307..287c9fe9fff9 100644
--- a/fs/f2fs/super.c
+++ b/fs/f2fs/super.c
@@ -3188,6 +3188,9 @@ static void kill_f2fs_super(struct super_block *sb)
};
f2fs_write_checkpoint(sbi, &cpc);
}
+
+ if (is_sbi_flag_set(sbi, SBI_IS_RECOVERED) && f2fs_readonly(sb))
+ sb->s_flags &= ~SB_RDONLY;
}
kill_block_super(sb);
}
--
2.17.1
From: Suzuki K Poulose <[email protected]>
[ Upstream commit 987d1e8dcd370d96029a3d76a0031b043c4a69ae ]
If the ETB is already enabled in sysfs mode, the ETB reports
success even if a perf mode is requested. Fix this by checking
the requested mode.
Cc: Mathieu Poirier <[email protected]>
Signed-off-by: Suzuki K Poulose <[email protected]>
Signed-off-by: Mathieu Poirier <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/hwtracing/coresight/coresight-etb10.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/drivers/hwtracing/coresight/coresight-etb10.c b/drivers/hwtracing/coresight/coresight-etb10.c
index 306119eaf16a..0dad8626bcfb 100644
--- a/drivers/hwtracing/coresight/coresight-etb10.c
+++ b/drivers/hwtracing/coresight/coresight-etb10.c
@@ -147,6 +147,10 @@ static int etb_enable(struct coresight_device *csdev, u32 mode)
if (val == CS_MODE_PERF)
return -EBUSY;
+ /* Don't let perf disturb sysFS sessions */
+ if (val == CS_MODE_SYSFS && mode == CS_MODE_PERF)
+ return -EBUSY;
+
/* Nothing to do, the tracer is already enabled. */
if (val == CS_MODE_SYSFS)
goto out;
--
2.17.1
From: Chao Yu <[email protected]>
[ Upstream commit 19c73a691ccf6fb2f12d4e9cf9830023966cec88 ]
Testcase to reproduce this bug:
1. mkfs.f2fs /dev/sdd
2. mount -t f2fs /dev/sdd /mnt/f2fs
3. touch /mnt/f2fs/file
4. sync
5. chattr +A /mnt/f2fs/file
6. xfs_io -f /mnt/f2fs/file -c "fsync"
7. godown /mnt/f2fs
8. umount /mnt/f2fs
9. mount -t f2fs /dev/sdd /mnt/f2fs
10. lsattr /mnt/f2fs/file
-----------------N- /mnt/f2fs/file
But actually, we expect the corrct result is:
-------A---------N- /mnt/f2fs/file
The reason is we didn't recover inode.i_flags field during mount,
fix it.
Signed-off-by: Chao Yu <[email protected]>
Signed-off-by: Jaegeuk Kim <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/f2fs/recovery.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/fs/f2fs/recovery.c b/fs/f2fs/recovery.c
index 95511ed11a22..12a3293bcbc9 100644
--- a/fs/f2fs/recovery.c
+++ b/fs/f2fs/recovery.c
@@ -221,6 +221,7 @@ static void recover_inode(struct inode *inode, struct page *page)
inode->i_mtime.tv_nsec = le32_to_cpu(raw->i_mtime_nsec);
F2FS_I(inode)->i_advise = raw->i_advise;
+ F2FS_I(inode)->i_flags = le32_to_cpu(raw->i_flags);
recover_inline_flags(inode, raw);
--
2.17.1
From: Yunlei He <[email protected]>
[ Upstream commit cda9cc595f0bb6ffa51a4efc4b6533dfa4039b4c ]
Now, we depend on fsck to ensure quota file data is ok,
so we scan whole partition if checkpoint without umount
flag. It's same for quota off error case, which may make
quota file data inconsistent.
generic/019 reports below error:
__quota_error: 1160 callbacks suppressed
Quota error (device zram1): write_blk: dquota write failed
Quota error (device zram1): qtree_write_dquot: Error -28 occurred while creating quota
Quota error (device zram1): write_blk: dquota write failed
Quota error (device zram1): qtree_write_dquot: Error -28 occurred while creating quota
Quota error (device zram1): write_blk: dquota write failed
Quota error (device zram1): qtree_write_dquot: Error -28 occurred while creating quota
Quota error (device zram1): write_blk: dquota write failed
Quota error (device zram1): qtree_write_dquot: Error -28 occurred while creating quota
Quota error (device zram1): write_blk: dquota write failed
Quota error (device zram1): qtree_write_dquot: Error -28 occurred while creating quota
VFS: Busy inodes after unmount of zram1. Self-destruct in 5 seconds. Have a nice day...
If we failed in below path due to fail to write dquot block, we will miss
to release quota inode, fix it.
- f2fs_put_super
- f2fs_quota_off_umount
- f2fs_quota_off
- f2fs_quota_sync <-- failed
- dquot_quota_off <-- missed to call
Signed-off-by: Yunlei He <[email protected]>
Signed-off-by: Chao Yu <[email protected]>
Signed-off-by: Jaegeuk Kim <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/f2fs/super.c | 19 ++++++++++++++++---
1 file changed, 16 insertions(+), 3 deletions(-)
diff --git a/fs/f2fs/super.c b/fs/f2fs/super.c
index 896b885f504e..d0d016f21307 100644
--- a/fs/f2fs/super.c
+++ b/fs/f2fs/super.c
@@ -1852,7 +1852,9 @@ static int f2fs_quota_off(struct super_block *sb, int type)
if (!inode || !igrab(inode))
return dquot_quota_off(sb, type);
- f2fs_quota_sync(sb, type);
+ err = f2fs_quota_sync(sb, type);
+ if (err)
+ goto out_put;
err = dquot_quota_off(sb, type);
if (err || f2fs_sb_has_quota_ino(sb))
@@ -1871,9 +1873,20 @@ static int f2fs_quota_off(struct super_block *sb, int type)
void f2fs_quota_off_umount(struct super_block *sb)
{
int type;
+ int err;
+
+ for (type = 0; type < MAXQUOTAS; type++) {
+ err = f2fs_quota_off(sb, type);
+ if (err) {
+ int ret = dquot_quota_off(sb, type);
- for (type = 0; type < MAXQUOTAS; type++)
- f2fs_quota_off(sb, type);
+ f2fs_msg(sb, KERN_ERR,
+ "Fail to turn off disk quota "
+ "(type: %d, err: %d, ret:%d), Please "
+ "run fsck to fix it.", type, err, ret);
+ set_sbi_flag(F2FS_SB(sb), SBI_NEED_FSCK);
+ }
+ }
}
static int f2fs_get_projid(struct inode *inode, kprojid_t *projid)
--
2.17.1
From: Vignesh R <[email protected]>
[ Upstream commit 726d75a6d243bf6730da3216f3592503f6f0f588 ]
Errata i870 is applicable in both EP and RC mode. Therefore rename
function dra7xx_pcie_ep_unaligned_memaccess(), that implements errata
workaround, to dra7xx_pcie_unaligned_memaccess() and call it for both RC
and EP. Make sure driver probe does not fail in case the workaround is not
applied for RC mode in order to maintain DT backward compatibility.
Reported-by: Chris Welch <[email protected]>
Signed-off-by: Vignesh R <[email protected]>
[[email protected]: reworded the log]
Signed-off-by: Lorenzo Pieralisi <[email protected]>
Acked-by: Kishon Vijay Abraham I <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/pci/controller/dwc/pci-dra7xx.c | 11 ++++++++---
1 file changed, 8 insertions(+), 3 deletions(-)
diff --git a/drivers/pci/controller/dwc/pci-dra7xx.c b/drivers/pci/controller/dwc/pci-dra7xx.c
index ce9224a36f62..a32d6dde7a57 100644
--- a/drivers/pci/controller/dwc/pci-dra7xx.c
+++ b/drivers/pci/controller/dwc/pci-dra7xx.c
@@ -542,7 +542,7 @@ static const struct of_device_id of_dra7xx_pcie_match[] = {
};
/*
- * dra7xx_pcie_ep_unaligned_memaccess: workaround for AM572x/AM571x Errata i870
+ * dra7xx_pcie_unaligned_memaccess: workaround for AM572x/AM571x Errata i870
* @dra7xx: the dra7xx device where the workaround should be applied
*
* Access to the PCIe slave port that are not 32-bit aligned will result
@@ -552,7 +552,7 @@ static const struct of_device_id of_dra7xx_pcie_match[] = {
*
* To avoid this issue set PCIE_SS1_AXI2OCP_LEGACY_MODE_ENABLE to 1.
*/
-static int dra7xx_pcie_ep_unaligned_memaccess(struct device *dev)
+static int dra7xx_pcie_unaligned_memaccess(struct device *dev)
{
int ret;
struct device_node *np = dev->of_node;
@@ -704,6 +704,11 @@ static int __init dra7xx_pcie_probe(struct platform_device *pdev)
dra7xx_pcie_writel(dra7xx, PCIECTRL_TI_CONF_DEVICE_TYPE,
DEVICE_TYPE_RC);
+
+ ret = dra7xx_pcie_unaligned_memaccess(dev);
+ if (ret)
+ dev_err(dev, "WA for Errata i870 not applied\n");
+
ret = dra7xx_add_pcie_port(dra7xx, pdev);
if (ret < 0)
goto err_gpio;
@@ -717,7 +722,7 @@ static int __init dra7xx_pcie_probe(struct platform_device *pdev)
dra7xx_pcie_writel(dra7xx, PCIECTRL_TI_CONF_DEVICE_TYPE,
DEVICE_TYPE_EP);
- ret = dra7xx_pcie_ep_unaligned_memaccess(dev);
+ ret = dra7xx_pcie_unaligned_memaccess(dev);
if (ret)
goto err_gpio;
--
2.17.1
From: Bartosz Golaszewski <[email protected]>
[ Upstream commit fa72d847d68d7833b77a4bef944cf2c5baf56f49 ]
This function can fail so check its return value in nvmem_register()
and act accordingly.
Signed-off-by: Bartosz Golaszewski <[email protected]>
Signed-off-by: Srinivas Kandagatla <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/nvmem/core.c | 10 ++++++++--
1 file changed, 8 insertions(+), 2 deletions(-)
diff --git a/drivers/nvmem/core.c b/drivers/nvmem/core.c
index aa1657831b70..7c530c88b3fb 100644
--- a/drivers/nvmem/core.c
+++ b/drivers/nvmem/core.c
@@ -516,11 +516,17 @@ struct nvmem_device *nvmem_register(const struct nvmem_config *config)
goto err_device_del;
}
- if (config->cells)
- nvmem_add_cells(nvmem, config->cells, config->ncells);
+ if (config->cells) {
+ rval = nvmem_add_cells(nvmem, config->cells, config->ncells);
+ if (rval)
+ goto err_teardown_compat;
+ }
return nvmem;
+err_teardown_compat:
+ if (config->compat)
+ device_remove_bin_file(nvmem->base_dev, &nvmem->eeprom);
err_device_del:
device_del(&nvmem->dev);
err_put_device:
--
2.17.1
From: Stephen Boyd <[email protected]>
[ Upstream commit 20edec388277b62ddfddb8b2b376a937a2cd6d1b ]
Both callers of coreboot_table_init() ioremap the pointer that comes in
but they don't unmap the memory on failure. Both of them also fail probe
immediately with the return value of coreboot_table_init(), leaking a
mapping when it fails. The mapping isn't necessary at all after devices
are populated either, so we can just drop the mapping here when we exit
the function. Let's do that to simplify the code a bit and plug the leak.
Cc: Wei-Ning Huang <[email protected]>
Cc: Julius Werner <[email protected]>
Cc: Brian Norris <[email protected]>
Cc: Samuel Holland <[email protected]>
Fixes: 570d30c2823f ("firmware: coreboot: Expose the coreboot table as a bus")
Signed-off-by: Stephen Boyd <[email protected]>
Reviewed-by: Julius Werner <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/firmware/google/coreboot_table.c | 7 ++++---
1 file changed, 4 insertions(+), 3 deletions(-)
diff --git a/drivers/firmware/google/coreboot_table.c b/drivers/firmware/google/coreboot_table.c
index 19db5709ae28..898bb9abc41f 100644
--- a/drivers/firmware/google/coreboot_table.c
+++ b/drivers/firmware/google/coreboot_table.c
@@ -110,7 +110,8 @@ int coreboot_table_init(struct device *dev, void __iomem *ptr)
if (strncmp(header.signature, "LBIO", sizeof(header.signature))) {
pr_warn("coreboot_table: coreboot table missing or corrupt!\n");
- return -ENODEV;
+ ret = -ENODEV;
+ goto out;
}
ptr_entry = (void *)ptr_header + header.header_bytes;
@@ -137,7 +138,8 @@ int coreboot_table_init(struct device *dev, void __iomem *ptr)
ptr_entry += entry.size;
}
-
+out:
+ iounmap(ptr);
return ret;
}
EXPORT_SYMBOL(coreboot_table_init);
@@ -146,7 +148,6 @@ int coreboot_table_exit(void)
{
if (ptr_header) {
bus_unregister(&coreboot_bus_type);
- iounmap(ptr_header);
ptr_header = NULL;
}
--
2.17.1
From: Theodore Ts'o <[email protected]>
[ Upstream commit f18b2b83a727a3db208308057d2c7945f368e625 ]
If the starting block number of either the source or destination file
exceeds the EOF, EXT4_IOC_MOVE_EXT should return EINVAL.
Also fixed the helper function mext_check_coverage() so that if the
logical block is beyond EOF, make it return immediately, instead of
looping until the block number wraps all the away around. This takes
long enough that if there are multiple threads trying to do pound on
an the same inode doing non-sensical things, it can end up triggering
the kernel's soft lockup detector.
Reported-by: [email protected]
Signed-off-by: Theodore Ts'o <[email protected]>
Cc: [email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
fs/ext4/move_extent.c | 8 ++++++--
1 file changed, 6 insertions(+), 2 deletions(-)
diff --git a/fs/ext4/move_extent.c b/fs/ext4/move_extent.c
index a409ff70d67b..2f5be02fc6f6 100644
--- a/fs/ext4/move_extent.c
+++ b/fs/ext4/move_extent.c
@@ -516,9 +516,13 @@ mext_check_arguments(struct inode *orig_inode,
orig_inode->i_ino, donor_inode->i_ino);
return -EINVAL;
}
- if (orig_eof < orig_start + *len - 1)
+ if (orig_eof <= orig_start)
+ *len = 0;
+ else if (orig_eof < orig_start + *len - 1)
*len = orig_eof - orig_start;
- if (donor_eof < donor_start + *len - 1)
+ if (donor_eof <= donor_start)
+ *len = 0;
+ else if (donor_eof < donor_start + *len - 1)
*len = donor_eof - donor_start;
if (!*len) {
ext4_debug("ext4 move extent: len should not be 0 "
--
2.17.1
From: Alan Douglas <[email protected]>
[ Upstream commit aa77e55d48124d0d78456eabf872fffb5decdbe1 ]
Test the correct value to see whether the PHY get failed.
Use devm_phy_get() instead of devm_phy_optional_get(), since it is
only called if phy name is given in devicetree and so should exist.
If failure when getting or linking PHY, put any PHYs which were
already got and unlink them.
Fixes: dfb80534692ddc5b ("PCI: cadence: Add generic PHY support to host and EP drivers")
Reported-by: Colin King <[email protected]>
Signed-off-by: Alan Douglas <[email protected]>
Signed-off-by: Lorenzo Pieralisi <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/pci/controller/pcie-cadence.c | 20 ++++++++++++--------
1 file changed, 12 insertions(+), 8 deletions(-)
diff --git a/drivers/pci/controller/pcie-cadence.c b/drivers/pci/controller/pcie-cadence.c
index 975bcdd6b5c0..cd795f6fc1e2 100644
--- a/drivers/pci/controller/pcie-cadence.c
+++ b/drivers/pci/controller/pcie-cadence.c
@@ -190,14 +190,16 @@ int cdns_pcie_init_phy(struct device *dev, struct cdns_pcie *pcie)
for (i = 0; i < phy_count; i++) {
of_property_read_string_index(np, "phy-names", i, &name);
- phy[i] = devm_phy_optional_get(dev, name);
- if (IS_ERR(phy))
- return PTR_ERR(phy);
-
+ phy[i] = devm_phy_get(dev, name);
+ if (IS_ERR(phy[i])) {
+ ret = PTR_ERR(phy[i]);
+ goto err_phy;
+ }
link[i] = device_link_add(dev, &phy[i]->dev, DL_FLAG_STATELESS);
if (!link[i]) {
+ devm_phy_put(dev, phy[i]);
ret = -EINVAL;
- goto err_link;
+ goto err_phy;
}
}
@@ -207,13 +209,15 @@ int cdns_pcie_init_phy(struct device *dev, struct cdns_pcie *pcie)
ret = cdns_pcie_enable_phy(pcie);
if (ret)
- goto err_link;
+ goto err_phy;
return 0;
-err_link:
- while (--i >= 0)
+err_phy:
+ while (--i >= 0) {
device_link_del(link[i]);
+ devm_phy_put(dev, phy[i]);
+ }
return ret;
}
--
2.17.1
From: Alexandre Belloni <[email protected]>
[ Upstream commit bb80e4fa57eb75ebd64ae9be4155da6d12c1a997 ]
The at91sam9rl PMC is not quite the same as the at91sam9g45 one and now has
its own compatible string. Add support for that.
Fixes: 217bace8e548 ("ARM: dts: fix PMC compatible")
Acked-by: Cristian Birsan <[email protected]>
Signed-off-by: Alexandre Belloni <[email protected]>
Signed-off-by: Felipe Balbi <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/usb/gadget/udc/atmel_usba_udc.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/usb/gadget/udc/atmel_usba_udc.c b/drivers/usb/gadget/udc/atmel_usba_udc.c
index 17147b8c771e..8f267be1745d 100644
--- a/drivers/usb/gadget/udc/atmel_usba_udc.c
+++ b/drivers/usb/gadget/udc/atmel_usba_udc.c
@@ -2017,6 +2017,8 @@ static struct usba_ep * atmel_udc_of_init(struct platform_device *pdev,
udc->errata = match->data;
udc->pmc = syscon_regmap_lookup_by_compatible("atmel,at91sam9g45-pmc");
+ if (IS_ERR(udc->pmc))
+ udc->pmc = syscon_regmap_lookup_by_compatible("atmel,at91sam9rl-pmc");
if (IS_ERR(udc->pmc))
udc->pmc = syscon_regmap_lookup_by_compatible("atmel,at91sam9x5-pmc");
if (udc->errata && IS_ERR(udc->pmc))
--
2.17.1
From: Casey Schaufler <[email protected]>
[ Upstream commit dcb569cf6ac99ca899b8109c128b6ae52477a015 ]
This fixes a pair of problems in the Smack ptrace checks
related to checking capabilities. In both cases, as reported
by Lukasz Pawelczyk, the raw capability calls are used rather
than the Smack wrapper that check addition restrictions.
In one case, as reported by Jann Horn, the wrong task is being
checked for capabilities.
Signed-off-by: Casey Schaufler <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
security/smack/smack_lsm.c | 13 ++++++++++---
1 file changed, 10 insertions(+), 3 deletions(-)
diff --git a/security/smack/smack_lsm.c b/security/smack/smack_lsm.c
index 340fc30ad85d..70d3066e69fe 100644
--- a/security/smack/smack_lsm.c
+++ b/security/smack/smack_lsm.c
@@ -421,6 +421,7 @@ static int smk_ptrace_rule_check(struct task_struct *tracer,
struct smk_audit_info ad, *saip = NULL;
struct task_smack *tsp;
struct smack_known *tracer_known;
+ const struct cred *tracercred;
if ((mode & PTRACE_MODE_NOAUDIT) == 0) {
smk_ad_init(&ad, func, LSM_AUDIT_DATA_TASK);
@@ -429,7 +430,8 @@ static int smk_ptrace_rule_check(struct task_struct *tracer,
}
rcu_read_lock();
- tsp = __task_cred(tracer)->security;
+ tracercred = __task_cred(tracer);
+ tsp = tracercred->security;
tracer_known = smk_of_task(tsp);
if ((mode & PTRACE_MODE_ATTACH) &&
@@ -439,7 +441,7 @@ static int smk_ptrace_rule_check(struct task_struct *tracer,
rc = 0;
else if (smack_ptrace_rule == SMACK_PTRACE_DRACONIAN)
rc = -EACCES;
- else if (capable(CAP_SYS_PTRACE))
+ else if (smack_privileged_cred(CAP_SYS_PTRACE, tracercred))
rc = 0;
else
rc = -EACCES;
@@ -1841,6 +1843,7 @@ static int smack_file_send_sigiotask(struct task_struct *tsk,
{
struct smack_known *skp;
struct smack_known *tkp = smk_of_task(tsk->cred->security);
+ const struct cred *tcred;
struct file *file;
int rc;
struct smk_audit_info ad;
@@ -1854,8 +1857,12 @@ static int smack_file_send_sigiotask(struct task_struct *tsk,
skp = file->f_security;
rc = smk_access(skp, tkp, MAY_DELIVER, NULL);
rc = smk_bu_note("sigiotask", skp, tkp, MAY_DELIVER, rc);
- if (rc != 0 && has_capability(tsk, CAP_MAC_OVERRIDE))
+
+ rcu_read_lock();
+ tcred = __task_cred(tsk);
+ if (rc != 0 && smack_privileged_cred(CAP_MAC_OVERRIDE, tcred))
rc = 0;
+ rcu_read_unlock();
smk_ad_init(&ad, __func__, LSM_AUDIT_DATA_TASK);
smk_ad_setfield_u_tsk(&ad, tsk);
--
2.17.1
From: Fabrice Gasnier <[email protected]>
[ Upstream commit 41ee1ea21052583eaf5487dfa0d0c907c9667548 ]
There's a race with root hub resume, when using external vbus supply.
Root hub gets resumed, but runtime pm autosuspend runs as external vbus
supply isn't enabled. So, host never exit from power down properly.
Initialize vbus external supply before, rater that after hub resume.
Fixes: 531ef5ebea96 ("usb: dwc2: add support for host mode external
vbus supply")
Tested-by: Artur Petrosyan <[email protected]>
Acked-by: Minas Harutyunyan <[email protected]>
Signed-off-by: Fabrice Gasnier <[email protected]>
Signed-off-by: Amelie Delaunay <[email protected]>
Signed-off-by: Felipe Balbi <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/usb/dwc2/hcd.c | 10 +++++++++-
1 file changed, 9 insertions(+), 1 deletion(-)
diff --git a/drivers/usb/dwc2/hcd.c b/drivers/usb/dwc2/hcd.c
index befaf1e9d98a..260010abf9d8 100644
--- a/drivers/usb/dwc2/hcd.c
+++ b/drivers/usb/dwc2/hcd.c
@@ -4393,6 +4393,7 @@ static int _dwc2_hcd_start(struct usb_hcd *hcd)
struct dwc2_hsotg *hsotg = dwc2_hcd_to_hsotg(hcd);
struct usb_bus *bus = hcd_to_bus(hcd);
unsigned long flags;
+ int ret;
dev_dbg(hsotg->dev, "DWC OTG HCD START\n");
@@ -4408,6 +4409,13 @@ static int _dwc2_hcd_start(struct usb_hcd *hcd)
dwc2_hcd_reinit(hsotg);
+ /* enable external vbus supply before resuming root hub */
+ spin_unlock_irqrestore(&hsotg->lock, flags);
+ ret = dwc2_vbus_supply_init(hsotg);
+ if (ret)
+ return ret;
+ spin_lock_irqsave(&hsotg->lock, flags);
+
/* Initialize and connect root hub if one is not already attached */
if (bus->root_hub) {
dev_dbg(hsotg->dev, "DWC OTG HCD Has Root Hub\n");
@@ -4417,7 +4425,7 @@ static int _dwc2_hcd_start(struct usb_hcd *hcd)
spin_unlock_irqrestore(&hsotg->lock, flags);
- return dwc2_vbus_supply_init(hsotg);
+ return 0;
}
/*
--
2.17.1
From: Horia Geantă <[email protected]>
[ Upstream commit aae733a3f46f5ef338fbdde26e14cbb205a23de0 ]
Fix the following sparse endianness warnings:
drivers/crypto/caam/regs.h:95:1: sparse: incorrect type in return expression (different base types) @@ expected unsigned int @@ got restricted __le32unsigned int @@
drivers/crypto/caam/regs.h:95:1: expected unsigned int
drivers/crypto/caam/regs.h:95:1: got restricted __le32 [usertype] <noident>
drivers/crypto/caam/regs.h:95:1: sparse: incorrect type in return expression (different base types) @@ expected unsigned int @@ got restricted __be32unsigned int @@
drivers/crypto/caam/regs.h:95:1: expected unsigned int
drivers/crypto/caam/regs.h:95:1: got restricted __be32 [usertype] <noident>
drivers/crypto/caam/regs.h:92:1: sparse: cast to restricted __le32
drivers/crypto/caam/regs.h:92:1: sparse: cast to restricted __be32
Fixes: 261ea058f016 ("crypto: caam - handle core endianness != caam endianness")
Reported-by: kbuild test robot <[email protected]>
Signed-off-by: Horia Geantă <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/crypto/caam/regs.h | 28 ++++++++++++++--------------
1 file changed, 14 insertions(+), 14 deletions(-)
diff --git a/drivers/crypto/caam/regs.h b/drivers/crypto/caam/regs.h
index 4fb91ba39c36..ce3f9ad7120f 100644
--- a/drivers/crypto/caam/regs.h
+++ b/drivers/crypto/caam/regs.h
@@ -70,22 +70,22 @@
extern bool caam_little_end;
extern bool caam_imx;
-#define caam_to_cpu(len) \
-static inline u##len caam##len ## _to_cpu(u##len val) \
-{ \
- if (caam_little_end) \
- return le##len ## _to_cpu(val); \
- else \
- return be##len ## _to_cpu(val); \
+#define caam_to_cpu(len) \
+static inline u##len caam##len ## _to_cpu(u##len val) \
+{ \
+ if (caam_little_end) \
+ return le##len ## _to_cpu((__force __le##len)val); \
+ else \
+ return be##len ## _to_cpu((__force __be##len)val); \
}
-#define cpu_to_caam(len) \
-static inline u##len cpu_to_caam##len(u##len val) \
-{ \
- if (caam_little_end) \
- return cpu_to_le##len(val); \
- else \
- return cpu_to_be##len(val); \
+#define cpu_to_caam(len) \
+static inline u##len cpu_to_caam##len(u##len val) \
+{ \
+ if (caam_little_end) \
+ return (__force u##len)cpu_to_le##len(val); \
+ else \
+ return (__force u##len)cpu_to_be##len(val); \
}
caam_to_cpu(16)
--
2.17.1
From: Shaohua Li <[email protected]>
[ Upstream commit d595567dc4f0c1d90685ec1e2e296e2cad2643ac ]
If we change the number of array's device after device is removed from array,
then add the device back to array, we can see that device is added as active
role instead of spare which we expected.
Please see the below link for details:
https://marc.info/?l=linux-raid&m=153736982015076&w=2
This is caused by that we prefer to use device's previous role which is
recorded by saved_raid_disk, but we should respect the new number of
conf->raid_disks since it could be changed after device is removed.
Reported-by: Gioh Kim <[email protected]>
Tested-by: Gioh Kim <[email protected]>
Acked-by: Guoqing Jiang <[email protected]>
Signed-off-by: Shaohua Li <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/md/md.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/drivers/md/md.c b/drivers/md/md.c
index 8668793262d0..85459c17cc60 100644
--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -1776,6 +1776,10 @@ static int super_1_validate(struct mddev *mddev, struct md_rdev *rdev)
} else
set_bit(In_sync, &rdev->flags);
rdev->raid_disk = role;
+ if (role >= mddev->raid_disks) {
+ rdev->saved_raid_disk = -1;
+ rdev->raid_disk = -1;
+ }
break;
}
if (sb->devflags & WriteMostly1)
--
2.17.1
From: Tonghao Zhang <[email protected]>
[ Upstream commit 4c1ef72e9b71a19fb405ebfcd37c0a5e16fa44ca ]
It is a serious driver defect to enable MSI or MSI-X more than once. Doing
so may panic the kernel as in the stack trace below:
Call Trace:
sysfs_add_one+0xa5/0xd0
create_dir+0x7c/0xe0
sysfs_create_subdir+0x1c/0x20
internal_create_group+0x6d/0x290
sysfs_create_groups+0x4a/0xa0
populate_msi_sysfs+0x1cd/0x210
pci_enable_msix+0x31c/0x3e0
igbuio_pci_open+0x72/0x300 [igb_uio]
uio_open+0xcc/0x120 [uio]
chrdev_open+0xa1/0x1e0
[...]
do_sys_open+0xf3/0x1f0
SyS_open+0x1e/0x20
system_call_fastpath+0x16/0x1b
---[ end trace 11042e2848880209 ]---
Kernel panic - not syncing: stack-protector: Kernel stack is corrupted in: ffffffffa056b4fa
We want to keep the WARN_ON() and stack trace so the driver can be fixed,
but we can avoid the kernel panic by returning an error. We may still get
warnings like this:
Call Trace:
pci_enable_msix+0x3c9/0x3e0
igbuio_pci_open+0x72/0x300 [igb_uio]
uio_open+0xcc/0x120 [uio]
chrdev_open+0xa1/0x1e0
[...]
do_sys_open+0xf3/0x1f0
SyS_open+0x1e/0x20
system_call_fastpath+0x16/0x1b
------------[ cut here ]------------
WARNING: at fs/sysfs/dir.c:526 sysfs_add_one+0xa5/0xd0()
sysfs: cannot create duplicate filename '/devices/pci0000:00/0000:00:03.0/0000:01:00.1/msi_irqs'
Signed-off-by: Tonghao Zhang <[email protected]>
[bhelgaas: changelog, fix patch whitespace, remove !!]
Signed-off-by: Bjorn Helgaas <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/pci/msi.c | 9 ++++++---
1 file changed, 6 insertions(+), 3 deletions(-)
diff --git a/drivers/pci/msi.c b/drivers/pci/msi.c
index f2ef896464b3..af24ed50a245 100644
--- a/drivers/pci/msi.c
+++ b/drivers/pci/msi.c
@@ -958,7 +958,6 @@ static int __pci_enable_msix(struct pci_dev *dev, struct msix_entry *entries,
}
}
}
- WARN_ON(!!dev->msix_enabled);
/* Check whether driver already requested for MSI irq */
if (dev->msi_enabled) {
@@ -1028,8 +1027,6 @@ static int __pci_enable_msi_range(struct pci_dev *dev, int minvec, int maxvec,
if (!pci_msi_supported(dev, minvec))
return -EINVAL;
- WARN_ON(!!dev->msi_enabled);
-
/* Check whether driver already requested MSI-X irqs */
if (dev->msix_enabled) {
pci_info(dev, "can't enable MSI (MSI-X already enabled)\n");
@@ -1039,6 +1036,9 @@ static int __pci_enable_msi_range(struct pci_dev *dev, int minvec, int maxvec,
if (maxvec < minvec)
return -ERANGE;
+ if (WARN_ON_ONCE(dev->msi_enabled))
+ return -EINVAL;
+
nvec = pci_msi_vec_count(dev);
if (nvec < 0)
return nvec;
@@ -1087,6 +1087,9 @@ static int __pci_enable_msix_range(struct pci_dev *dev,
if (maxvec < minvec)
return -ERANGE;
+ if (WARN_ON_ONCE(dev->msix_enabled))
+ return -EINVAL;
+
for (;;) {
if (affd) {
nvec = irq_calc_affinity_vectors(minvec, nvec, affd);
--
2.17.1
From: Chuck Lever <[email protected]>
[ Upstream commit ef739b2175dde9c05594f768cb78149f1ce2ac36 ]
On a fresh connection, an RPC/RDMA client is supposed to send only
one RPC Call until it gets a credit grant in the first RPC Reply
from the server [RFC 8166, Section 3.3.3].
There is a bug in the Linux client's credit accounting mechanism
introduced by commit e7ce710a8802 ("xprtrdma: Avoid deadlock when
credit window is reset"). On connect, it simply dumps all pending
RPC Calls onto the new connection.
Servers have been tolerant of this bad behavior. Currently no server
implementation ever changes its credit grant over reconnects, and
servers always repost enough Receives before connections are fully
established.
To correct this issue, ensure that the client resets both the credit
grant _and_ the congestion window when handling a reconnect.
Fixes: e7ce710a8802 ("xprtrdma: Avoid deadlock when credit ... ")
Signed-off-by: Chuck Lever <[email protected]>
Cc: [email protected]
Signed-off-by: Anna Schumaker <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/sunrpc/xprtrdma/svc_rdma_backchannel.c | 1 +
net/sunrpc/xprtrdma/transport.c | 6 ++++++
2 files changed, 7 insertions(+)
diff --git a/net/sunrpc/xprtrdma/svc_rdma_backchannel.c b/net/sunrpc/xprtrdma/svc_rdma_backchannel.c
index a68180090554..b9827665ff35 100644
--- a/net/sunrpc/xprtrdma/svc_rdma_backchannel.c
+++ b/net/sunrpc/xprtrdma/svc_rdma_backchannel.c
@@ -248,6 +248,7 @@ static void
xprt_rdma_bc_close(struct rpc_xprt *xprt)
{
dprintk("svcrdma: %s: xprt %p\n", __func__, xprt);
+ xprt->cwnd = RPC_CWNDSHIFT;
}
static void
diff --git a/net/sunrpc/xprtrdma/transport.c b/net/sunrpc/xprtrdma/transport.c
index 143ce2579ba9..98cbc7b060ba 100644
--- a/net/sunrpc/xprtrdma/transport.c
+++ b/net/sunrpc/xprtrdma/transport.c
@@ -468,6 +468,12 @@ xprt_rdma_close(struct rpc_xprt *xprt)
xprt->reestablish_timeout = 0;
xprt_disconnect_done(xprt);
rpcrdma_ep_disconnect(ep, ia);
+
+ /* Prepare @xprt for the next connection by reinitializing
+ * its credit grant to one (see RFC 8166, Section 3.3.3).
+ */
+ r_xprt->rx_buf.rb_credits = 1;
+ xprt->cwnd = RPC_CWNDSHIFT;
}
/**
--
2.17.1
From: Fabrice Gasnier <[email protected]>
[ Upstream commit 5aa678c7fd5371769efde30763fb43a43a118cd0 ]
dwc2_vbus_supply_exit() may call regulator_disable(). It shouldn't be
called with interrupts disabled as it might sleep.
This is seen with DEBUG_ATOMIC_SLEEP=y.
Fixes: 531ef5ebea96 ("usb: dwc2: add support for host mode external
vbus supply")
Tested-by: Artur Petrosyan <[email protected]>
Acked-by: Minas Harutyunyan <[email protected]>
Signed-off-by: Fabrice Gasnier <[email protected]>
Signed-off-by: Amelie Delaunay <[email protected]>
Signed-off-by: Felipe Balbi <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/usb/dwc2/hcd.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/usb/dwc2/hcd.c b/drivers/usb/dwc2/hcd.c
index 2bd6e6bfc241..befaf1e9d98a 100644
--- a/drivers/usb/dwc2/hcd.c
+++ b/drivers/usb/dwc2/hcd.c
@@ -4482,7 +4482,9 @@ static int _dwc2_hcd_suspend(struct usb_hcd *hcd)
hprt0 |= HPRT0_SUSP;
hprt0 &= ~HPRT0_PWR;
dwc2_writel(hsotg, hprt0, HPRT0);
+ spin_unlock_irqrestore(&hsotg->lock, flags);
dwc2_vbus_supply_exit(hsotg);
+ spin_lock_irqsave(&hsotg->lock, flags);
}
/* Enter partial_power_down */
--
2.17.1
From: Lina Iyer <[email protected]>
[ Upstream commit 7bae48b22c8d38c5cd50f52b6e15d134e2bb3935 ]
The PDC irqchp can convert a falling edge or level low interrupt to a
rising edge or level high interrupt at the GIC. We just need to setup
the GIC correctly. Set up the interrupt type for the IRQ_TYPE_EDGE_BOTH
as IRQ_TYPE_EDGE_RISING at the GIC.
Fixes: f55c73aef890 ("irqchip/pdc: Add PDC interrupt controller for QCOM SoCs")
Reported-by: Evan Green <[email protected]>
Reviewed-by: Evan Green <[email protected]>
Signed-off-by: Lina Iyer <[email protected]>
Signed-off-by: Marc Zyngier <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/irqchip/qcom-pdc.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/irqchip/qcom-pdc.c b/drivers/irqchip/qcom-pdc.c
index b1b47a40a278..faa7d61b9d6c 100644
--- a/drivers/irqchip/qcom-pdc.c
+++ b/drivers/irqchip/qcom-pdc.c
@@ -124,6 +124,7 @@ static int qcom_pdc_gic_set_type(struct irq_data *d, unsigned int type)
break;
case IRQ_TYPE_EDGE_BOTH:
pdc_type = PDC_EDGE_DUAL;
+ type = IRQ_TYPE_EDGE_RISING;
break;
case IRQ_TYPE_LEVEL_HIGH:
pdc_type = PDC_LEVEL_HIGH;
--
2.17.1
From: Quinn Tran <[email protected]>
[ Upstream commit 710bc78f829d014eca95ed7ccc4052bc064b1320 ]
This patch prevents user space mailbox request from doing chip reset if the
mailbox timed out. The chip reset is only reserved for the DPC thread to
ensure all mailbox requests are flushed properly. The DPC thread is
responsible for the flushing all MBs and chip reset.
Fixes: b2000805a975 ("scsi: qla2xxx: Flush mailbox commands on chip reset")
Cc: <[email protected]>
Signed-off-by: Quinn Tran <[email protected]>
Reviewed-by: Ewan D. Milne <[email protected]>
Signed-off-by: Himanshu Madhani <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/scsi/qla2xxx/qla_mbx.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/scsi/qla2xxx/qla_mbx.c b/drivers/scsi/qla2xxx/qla_mbx.c
index 2c6c2cd5a0d0..596a9b214df1 100644
--- a/drivers/scsi/qla2xxx/qla_mbx.c
+++ b/drivers/scsi/qla2xxx/qla_mbx.c
@@ -493,7 +493,7 @@ qla2x00_mailbox_command(scsi_qla_host_t *vha, mbx_cmd_t *mcp)
set_bit(ISP_ABORT_NEEDED, &vha->dpc_flags);
qla2xxx_wake_dpc(vha);
}
- } else if (!abort_active) {
+ } else if (current == ha->dpc_thread) {
/* call abort directly since we are in the DPC thread */
ql_dbg(ql_dbg_mbx, vha, 0x101d,
"Timeout, calling abort_isp.\n");
--
2.17.1
From: Adam Thomson <[email protected]>
[ Upstream commit 554fab6dbf20ee7298ed2d4e8398b85e6058abb7 ]
Currently when requesting a specific voltage or current through
the psy interface, for PPS, when reading back from that interface
the values will always be the same as previously given, if the
request was successful. However PPS only allows for 20mV voltage
steps and 50mA current steps, and the psy class expects microvolt
and micro amp requests, so inbetween values can be provided through
this interface. Really when reading back the true values negotiated
should be given, and not the ones originally asked for.
To report the actual values negotiated with the Source, the values
stored are now rounded down to the relevant step units prior to
building the PPS request, so that those values are later correctly
reported through the psy interface. In addition this improves the
adjustments made to meet the operating power requirements of the
platform, which previously could have been slightly out due to not
using valid PPS units of voltage and current.
Signed-off-by: Adam Thomson <[email protected]>
Reviewed-by: Guenter Roeck <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/usb/typec/tcpm.c | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/drivers/usb/typec/tcpm.c b/drivers/usb/typec/tcpm.c
index 4f1f4215f3d6..18fb0433f59a 100644
--- a/drivers/usb/typec/tcpm.c
+++ b/drivers/usb/typec/tcpm.c
@@ -4116,6 +4116,9 @@ static int tcpm_pps_set_op_curr(struct tcpm_port *port, u16 op_curr)
goto port_unlock;
}
+ /* Round down operating current to align with PPS valid steps */
+ op_curr = op_curr - (op_curr % RDO_PROG_CURR_MA_STEP);
+
reinit_completion(&port->pps_complete);
port->pps_data.op_curr = op_curr;
port->pps_status = 0;
@@ -4169,6 +4172,9 @@ static int tcpm_pps_set_out_volt(struct tcpm_port *port, u16 out_volt)
goto port_unlock;
}
+ /* Round down output voltage to align with PPS valid steps */
+ out_volt = out_volt - (out_volt % RDO_PROG_VOLT_MV_STEP);
+
reinit_completion(&port->pps_complete);
port->pps_data.out_volt = out_volt;
port->pps_status = 0;
--
2.17.1
From: Chao Yu <[email protected]>
[ Upstream commit 5cd1f387a13b5188b4edb4c834310302a85a6ea2 ]
Testcase to reproduce this bug:
1. mkfs.f2fs -O extra_attr -O inode_crtime /dev/sdd
2. mount -t f2fs /dev/sdd /mnt/f2fs
3. touch /mnt/f2fs/file
4. xfs_io -f /mnt/f2fs/file -c "fsync"
5. godown /mnt/f2fs
6. umount /mnt/f2fs
7. mount -t f2fs /dev/sdd /mnt/f2fs
8. xfs_io -f /mnt/f2fs/file -c "statx -r"
stat.btime.tv_sec = 0
stat.btime.tv_nsec = 0
This patch fixes to recover inode creation time fields during
mount.
Signed-off-by: Chao Yu <[email protected]>
Signed-off-by: Jaegeuk Kim <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/f2fs/node.c | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/fs/f2fs/node.c b/fs/f2fs/node.c
index dd2e45a661aa..fe5c9ff92772 100644
--- a/fs/f2fs/node.c
+++ b/fs/f2fs/node.c
@@ -2560,6 +2560,13 @@ int f2fs_recover_inode_page(struct f2fs_sb_info *sbi, struct page *page)
F2FS_FITS_IN_INODE(src, le16_to_cpu(src->i_extra_isize),
i_projid))
dst->i_projid = src->i_projid;
+
+ if (f2fs_sb_has_inode_crtime(sbi->sb) &&
+ F2FS_FITS_IN_INODE(src, le16_to_cpu(src->i_extra_isize),
+ i_crtime_nsec)) {
+ dst->i_crtime = src->i_crtime;
+ dst->i_crtime_nsec = src->i_crtime_nsec;
+ }
}
new_ni = old_ni;
--
2.17.1
From: Anshuman Gupta <[email protected]>
[ Upstream commit 330e2d61cdd58363eb5e66b2e72f76fe3c5492e0 ]
When USB bus host controller root hub resumes from autosuspend,
it immediately tries to enter auto-suspend, but there can be a
scenario when root hub is resuming its usb2 ports, in that particular
case USB host controller auto suspend fails since it is busy
to resuming its usb2 ports.
This makes multiple failed cycles of auto-suspend until all usb2
ports of host controller root hub do not resume.
This patch uses USB core framework usb_hcd_start_port_resume,
usb_hcd_end_port_resume API's in order to autoresume/autosuspend
root hub properly.
Signed-off-by: Anshuman Gupta <[email protected]>
Signed-off-by: Mathias Nyman <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/usb/host/xhci-hub.c | 5 +++++
drivers/usb/host/xhci-ring.c | 1 +
2 files changed, 6 insertions(+)
diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c
index 7e2a531ba321..12eea73d9f20 100644
--- a/drivers/usb/host/xhci-hub.c
+++ b/drivers/usb/host/xhci-hub.c
@@ -900,6 +900,7 @@ static u32 xhci_get_port_status(struct usb_hcd *hcd,
set_bit(wIndex, &bus_state->resuming_ports);
bus_state->resume_done[wIndex] = timeout;
mod_timer(&hcd->rh_timer, timeout);
+ usb_hcd_start_port_resume(&hcd->self, wIndex);
}
/* Has resume been signalled for USB_RESUME_TIME yet? */
} else if (time_after_eq(jiffies,
@@ -940,6 +941,7 @@ static u32 xhci_get_port_status(struct usb_hcd *hcd,
clear_bit(wIndex, &bus_state->rexit_ports);
}
+ usb_hcd_end_port_resume(&hcd->self, wIndex);
bus_state->port_c_suspend |= 1 << wIndex;
bus_state->suspended_ports &= ~(1 << wIndex);
} else {
@@ -962,6 +964,7 @@ static u32 xhci_get_port_status(struct usb_hcd *hcd,
(raw_port_status & PORT_PLS_MASK) != XDEV_RESUME) {
bus_state->resume_done[wIndex] = 0;
clear_bit(wIndex, &bus_state->resuming_ports);
+ usb_hcd_end_port_resume(&hcd->self, wIndex);
}
@@ -1337,6 +1340,7 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
goto error;
set_bit(wIndex, &bus_state->resuming_ports);
+ usb_hcd_start_port_resume(&hcd->self, wIndex);
xhci_set_link_state(xhci, ports[wIndex],
XDEV_RESUME);
spin_unlock_irqrestore(&xhci->lock, flags);
@@ -1345,6 +1349,7 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
xhci_set_link_state(xhci, ports[wIndex],
XDEV_U0);
clear_bit(wIndex, &bus_state->resuming_ports);
+ usb_hcd_end_port_resume(&hcd->self, wIndex);
}
bus_state->port_c_suspend |= 1 << wIndex;
diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index f0a99aa0ac58..cd4659703647 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -1602,6 +1602,7 @@ static void handle_port_status(struct xhci_hcd *xhci,
set_bit(HCD_FLAG_POLL_RH, &hcd->flags);
mod_timer(&hcd->rh_timer,
bus_state->resume_done[hcd_portnum]);
+ usb_hcd_start_port_resume(&hcd->self, hcd_portnum);
bogus_port_status = true;
}
}
--
2.17.1
From: Dexuan Cui <[email protected]>
[ Upstream commit fc62c3b1977d62e6374fd6e28d371bb42dfa5c9d ]
We don't need to call process_ib_ipinfo() if message->kvp_hdr.operation is
KVP_OP_GET_IP_INFO in kvp_send_key(), because here we just need to pass on
the op code from the host to the userspace; when the userspace returns
the info requested by the host, we pass the info on to the host in
kvp_respond_to_host() -> process_ob_ipinfo(). BTW, the current buggy code
actually doesn't cause any harm, because only message->kvp_hdr.operation
is used by the userspace, in the case of KVP_OP_GET_IP_INFO.
The patch also adds a missing "break;" in kvp_send_key(). BTW, the current
buggy code actually doesn't cause any harm, because in the case of
KVP_OP_SET, the unexpected fall-through corrupts
message->body.kvp_set.data.key_size, but that is not really used: see
the definition of struct hv_kvp_exchg_msg_value.
Signed-off-by: Dexuan Cui <[email protected]>
Cc: K. Y. Srinivasan <[email protected]>
Cc: Haiyang Zhang <[email protected]>
Cc: Stephen Hemminger <[email protected]>
Cc: <[email protected]>
Signed-off-by: K. Y. Srinivasan <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/hv/hv_kvp.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/drivers/hv/hv_kvp.c b/drivers/hv/hv_kvp.c
index 5eed1e7da15c..57715a0c8120 100644
--- a/drivers/hv/hv_kvp.c
+++ b/drivers/hv/hv_kvp.c
@@ -353,7 +353,6 @@ static void process_ib_ipinfo(void *in_msg, void *out_msg, int op)
out->body.kvp_ip_val.dhcp_enabled = in->kvp_ip_val.dhcp_enabled;
- default:
utf16s_to_utf8s((wchar_t *)in->kvp_ip_val.adapter_id,
MAX_ADAPTER_ID_SIZE,
UTF16_LITTLE_ENDIAN,
@@ -406,7 +405,7 @@ kvp_send_key(struct work_struct *dummy)
process_ib_ipinfo(in_msg, message, KVP_OP_SET_IP_INFO);
break;
case KVP_OP_GET_IP_INFO:
- process_ib_ipinfo(in_msg, message, KVP_OP_GET_IP_INFO);
+ /* We only need to pass on message->kvp_hdr.operation. */
break;
case KVP_OP_SET:
switch (in_msg->body.kvp_set.data.value_type) {
@@ -446,6 +445,9 @@ kvp_send_key(struct work_struct *dummy)
break;
}
+
+ break;
+
case KVP_OP_GET:
message->body.kvp_set.data.key_size =
utf16s_to_utf8s(
--
2.17.1
From: Dexuan Cui <[email protected]>
[ Upstream commit 25355252607ca288f329ee033f387764883393f6 ]
A cpumask structure on the stack can cause a warning with
CONFIG_NR_CPUS=8192 (e.g. Ubuntu 16.04 and 18.04 use this):
drivers/hv//channel_mgmt.c: In function ‘init_vp_index’:
drivers/hv//channel_mgmt.c:702:1: warning: the frame size of 1032 bytes
is larger than 1024 bytes [-Wframe-larger-than=]
Nowadays it looks most distros enable CONFIG_CPUMASK_OFFSTACK=y, and
hence we can work around the warning by using cpumask_var_t.
Signed-off-by: Dexuan Cui <[email protected]>
Cc: K. Y. Srinivasan <[email protected]>
Cc: Haiyang Zhang <[email protected]>
Cc: Stephen Hemminger <[email protected]>
Cc: <[email protected]>
Signed-off-by: K. Y. Srinivasan <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/hv/channel_mgmt.c | 14 +++++++++-----
1 file changed, 9 insertions(+), 5 deletions(-)
diff --git a/drivers/hv/channel_mgmt.c b/drivers/hv/channel_mgmt.c
index 0f0e091c117c..c4a1ebcfffb6 100644
--- a/drivers/hv/channel_mgmt.c
+++ b/drivers/hv/channel_mgmt.c
@@ -606,16 +606,18 @@ static void init_vp_index(struct vmbus_channel *channel, u16 dev_type)
bool perf_chn = vmbus_devs[dev_type].perf_device;
struct vmbus_channel *primary = channel->primary_channel;
int next_node;
- struct cpumask available_mask;
+ cpumask_var_t available_mask;
struct cpumask *alloced_mask;
if ((vmbus_proto_version == VERSION_WS2008) ||
- (vmbus_proto_version == VERSION_WIN7) || (!perf_chn)) {
+ (vmbus_proto_version == VERSION_WIN7) || (!perf_chn) ||
+ !alloc_cpumask_var(&available_mask, GFP_KERNEL)) {
/*
* Prior to win8, all channel interrupts are
* delivered on cpu 0.
* Also if the channel is not a performance critical
* channel, bind it to cpu 0.
+ * In case alloc_cpumask_var() fails, bind it to cpu 0.
*/
channel->numa_node = 0;
channel->target_cpu = 0;
@@ -653,7 +655,7 @@ static void init_vp_index(struct vmbus_channel *channel, u16 dev_type)
cpumask_clear(alloced_mask);
}
- cpumask_xor(&available_mask, alloced_mask,
+ cpumask_xor(available_mask, alloced_mask,
cpumask_of_node(primary->numa_node));
cur_cpu = -1;
@@ -671,10 +673,10 @@ static void init_vp_index(struct vmbus_channel *channel, u16 dev_type)
}
while (true) {
- cur_cpu = cpumask_next(cur_cpu, &available_mask);
+ cur_cpu = cpumask_next(cur_cpu, available_mask);
if (cur_cpu >= nr_cpu_ids) {
cur_cpu = -1;
- cpumask_copy(&available_mask,
+ cpumask_copy(available_mask,
cpumask_of_node(primary->numa_node));
continue;
}
@@ -704,6 +706,8 @@ static void init_vp_index(struct vmbus_channel *channel, u16 dev_type)
channel->target_cpu = cur_cpu;
channel->target_vp = hv_cpu_number_to_vp_number(cur_cpu);
+
+ free_cpumask_var(available_mask);
}
static void vmbus_wait_for_unload(void)
--
2.17.1
From: Javier Martinez Canillas <[email protected]>
[ Upstream commit 0d6d0d62d9505a9816716aa484ebd0b04c795063 ]
For TPM 1.2 chips the system setup utility allows to set the TPM device in
one of the following states:
* Active: Security chip is functional
* Inactive: Security chip is visible, but is not functional
* Disabled: Security chip is hidden and is not functional
When choosing the "Inactive" state, the TPM 1.2 device is enumerated and
registered, but sending TPM commands fail with either TPM_DEACTIVATED or
TPM_DISABLED depending if the firmware deactivated or disabled the TPM.
Since these TPM 1.2 error codes don't have special treatment, inactivating
the TPM leads to a very noisy kernel log buffer that shows messages like
the following:
tpm_tis 00:05: 1.2 TPM (device-id 0x0, rev-id 78)
tpm tpm0: A TPM error (6) occurred attempting to read a pcr value
tpm tpm0: TPM is disabled/deactivated (0x6)
tpm tpm0: A TPM error (6) occurred attempting get random
tpm tpm0: A TPM error (6) occurred attempting to read a pcr value
ima: No TPM chip found, activating TPM-bypass! (rc=6)
tpm tpm0: A TPM error (6) occurred attempting get random
tpm tpm0: A TPM error (6) occurred attempting get random
tpm tpm0: A TPM error (6) occurred attempting get random
tpm tpm0: A TPM error (6) occurred attempting get random
Let's just suppress error log messages for the TPM_{DEACTIVATED,DISABLED}
return codes, since this is expected when the TPM 1.2 is set to Inactive.
In that case the kernel log is cleaner and less confusing for users, i.e:
tpm_tis 00:05: 1.2 TPM (device-id 0x0, rev-id 78)
tpm tpm0: TPM is disabled/deactivated (0x6)
ima: No TPM chip found, activating TPM-bypass! (rc=6)
Reported-by: Hans de Goede <[email protected]>
Signed-off-by: Javier Martinez Canillas <[email protected]>
Reviewed-by: Jarkko Sakkinen <[email protected]>
Signed-off-by: Jarkko Sakkinen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/char/tpm/tpm-interface.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/char/tpm/tpm-interface.c b/drivers/char/tpm/tpm-interface.c
index 1a803b0cf980..9f61106502a9 100644
--- a/drivers/char/tpm/tpm-interface.c
+++ b/drivers/char/tpm/tpm-interface.c
@@ -663,7 +663,8 @@ ssize_t tpm_transmit_cmd(struct tpm_chip *chip, struct tpm_space *space,
return len;
err = be32_to_cpu(header->return_code);
- if (err != 0 && desc)
+ if (err != 0 && err != TPM_ERR_DISABLED && err != TPM_ERR_DEACTIVATED
+ && desc)
dev_err(&chip->dev, "A TPM error (%d) occurred %s\n", err,
desc);
if (err)
--
2.17.1
From: Mika Westerberg <[email protected]>
[ Upstream commit 6299cf9ec3985cac70bede8a855b5087b81a6640 ]
We enable power management automatically for bridges where
pci_bridge_d3_possible() returns true. However, these bridges may have
ACPI methods such as _DSW that need to be called before D3 entry. For
example in Lenovo Thinkpad X1 Carbon 6th _DSW method is used to prepare
D3cold for the PCIe root port hosting Thunderbolt chain. Because wake is
not enabled _DSW method is never called and the port does not enter
D3cold properly consuming more power than necessary.
Users can work this around by writing "enabled" to "wakeup" sysfs file
under the device in question but that is not something an ordinary user
is expected to do.
Since we already automatically enable power management for PCIe ports
with ->bridge_d3 set extend that to enable wake for them as well,
assuming the port has any ACPI wakeup related objects implemented in the
namespace (adev->wakeup.flags.valid is true). This ensures the necessary
ACPI methods get called at appropriate times and allows the root port in
Thinkpad X1 Carbon 6th to go into D3cold.
Signed-off-by: Mika Westerberg <[email protected]>
Signed-off-by: Bjorn Helgaas <[email protected]>
Reviewed-by: Rafael J. Wysocki <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/pci/pci-acpi.c | 16 +++++++++++++++-
1 file changed, 15 insertions(+), 1 deletion(-)
diff --git a/drivers/pci/pci-acpi.c b/drivers/pci/pci-acpi.c
index c2ab57705043..f8436d1c4d45 100644
--- a/drivers/pci/pci-acpi.c
+++ b/drivers/pci/pci-acpi.c
@@ -762,19 +762,33 @@ static void pci_acpi_setup(struct device *dev)
return;
device_set_wakeup_capable(dev, true);
+ /*
+ * For bridges that can do D3 we enable wake automatically (as
+ * we do for the power management itself in that case). The
+ * reason is that the bridge may have additional methods such as
+ * _DSW that need to be called.
+ */
+ if (pci_dev->bridge_d3)
+ device_wakeup_enable(dev);
+
acpi_pci_wakeup(pci_dev, false);
}
static void pci_acpi_cleanup(struct device *dev)
{
struct acpi_device *adev = ACPI_COMPANION(dev);
+ struct pci_dev *pci_dev = to_pci_dev(dev);
if (!adev)
return;
pci_acpi_remove_pm_notifier(adev);
- if (adev->wakeup.flags.valid)
+ if (adev->wakeup.flags.valid) {
+ if (pci_dev->bridge_d3)
+ device_wakeup_disable(dev);
+
device_set_wakeup_capable(dev, false);
+ }
}
static bool pci_acpi_bus_match(struct device *dev)
--
2.17.1
From: Selvin Xavier <[email protected]>
[ Upstream commit d455f29f6d76a5f94881ca1289aaa1e90617ff5d ]
Fix possible recursive lock warning. Its a false warning as the locks are
part of two differnt HW Queue data structure - cmdq and creq. Debug kernel
is throwing the following warning and stack trace.
[ 783.914967] ============================================
[ 783.914970] WARNING: possible recursive locking detected
[ 783.914973] 4.19.0-rc2+ #33 Not tainted
[ 783.914976] --------------------------------------------
[ 783.914979] swapper/2/0 is trying to acquire lock:
[ 783.914982] 000000002aa3949d (&(&hwq->lock)->rlock){..-.}, at: bnxt_qplib_service_creq+0x232/0x350 [bnxt_re]
[ 783.914999]
but task is already holding lock:
[ 783.915002] 00000000be73920d (&(&hwq->lock)->rlock){..-.}, at: bnxt_qplib_service_creq+0x2a/0x350 [bnxt_re]
[ 783.915013]
other info that might help us debug this:
[ 783.915016] Possible unsafe locking scenario:
[ 783.915019] CPU0
[ 783.915021] ----
[ 783.915034] lock(&(&hwq->lock)->rlock);
[ 783.915035] lock(&(&hwq->lock)->rlock);
[ 783.915037]
*** DEADLOCK ***
[ 783.915038] May be due to missing lock nesting notation
[ 783.915039] 1 lock held by swapper/2/0:
[ 783.915040] #0: 00000000be73920d (&(&hwq->lock)->rlock){..-.}, at: bnxt_qplib_service_creq+0x2a/0x350 [bnxt_re]
[ 783.915044]
stack backtrace:
[ 783.915046] CPU: 2 PID: 0 Comm: swapper/2 Not tainted 4.19.0-rc2+ #33
[ 783.915047] Hardware name: Dell Inc. PowerEdge R730/0599V5, BIOS 1.0.4 08/28/2014
[ 783.915048] Call Trace:
[ 783.915049] <IRQ>
[ 783.915054] dump_stack+0x90/0xe3
[ 783.915058] __lock_acquire+0x106c/0x1080
[ 783.915061] ? sched_clock+0x5/0x10
[ 783.915063] lock_acquire+0xbd/0x1a0
[ 783.915065] ? bnxt_qplib_service_creq+0x232/0x350 [bnxt_re]
[ 783.915069] _raw_spin_lock_irqsave+0x4a/0x90
[ 783.915071] ? bnxt_qplib_service_creq+0x232/0x350 [bnxt_re]
[ 783.915073] bnxt_qplib_service_creq+0x232/0x350 [bnxt_re]
[ 783.915078] tasklet_action_common.isra.17+0x197/0x1b0
[ 783.915081] __do_softirq+0xcb/0x3a6
[ 783.915084] irq_exit+0xe9/0x100
[ 783.915085] do_IRQ+0x6a/0x120
[ 783.915087] common_interrupt+0xf/0xf
[ 783.915088] </IRQ>
Use nested notation for the spin_lock to avoid this warning.
Signed-off-by: Selvin Xavier <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/infiniband/hw/bnxt_re/qplib_rcfw.c | 13 +++++++++++--
1 file changed, 11 insertions(+), 2 deletions(-)
diff --git a/drivers/infiniband/hw/bnxt_re/qplib_rcfw.c b/drivers/infiniband/hw/bnxt_re/qplib_rcfw.c
index 2852d350ada1..6637df77d236 100644
--- a/drivers/infiniband/hw/bnxt_re/qplib_rcfw.c
+++ b/drivers/infiniband/hw/bnxt_re/qplib_rcfw.c
@@ -309,8 +309,17 @@ static int bnxt_qplib_process_qp_event(struct bnxt_qplib_rcfw *rcfw,
rcfw->aeq_handler(rcfw, qp_event, qp);
break;
default:
- /* Command Response */
- spin_lock_irqsave(&cmdq->lock, flags);
+ /*
+ * Command Response
+ * cmdq->lock needs to be acquired to synchronie
+ * the command send and completion reaping. This function
+ * is always called with creq->lock held. Using
+ * the nested variant of spin_lock.
+ *
+ */
+
+ spin_lock_irqsave_nested(&cmdq->lock, flags,
+ SINGLE_DEPTH_NESTING);
cookie = le16_to_cpu(qp_event->cookie);
mcookie = qp_event->cookie;
blocked = cookie & RCFW_CMD_IS_BLOCKING;
--
2.17.1
From: "[email protected]" <[email protected]>
[ Upstream commit 325b9313ec3be56c8e2fe03f977fee19cec75820 ]
atmel,oc-gpio is optional. Request its irq only when atmel,oc is set
in device tree.
devm_gpiod_get_index_optional returns NULL if -ENOENT. Check its
return value for NULL before error, because it is more probable that
atmel,oc is not set.
This fixes the following errors on boards where atmel,oc is not set in
device tree:
[ 0.960000] at91_ohci 500000.ohci: failed to request gpio "overcurrent" IRQ
[ 0.960000] at91_ohci 500000.ohci: failed to request gpio "overcurrent" IRQ
[ 0.970000] at91_ohci 500000.ohci: failed to request gpio "overcurrent" IRQ
Signed-off-by: Tudor Ambarus <[email protected]>
Acked-by: Nicolas Ferre <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/usb/host/ohci-at91.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/usb/host/ohci-at91.c b/drivers/usb/host/ohci-at91.c
index e98673954020..ec6739ef3129 100644
--- a/drivers/usb/host/ohci-at91.c
+++ b/drivers/usb/host/ohci-at91.c
@@ -551,6 +551,8 @@ static int ohci_hcd_at91_drv_probe(struct platform_device *pdev)
pdata->overcurrent_pin[i] =
devm_gpiod_get_index_optional(&pdev->dev, "atmel,oc",
i, GPIOD_IN);
+ if (!pdata->overcurrent_pin[i])
+ continue;
if (IS_ERR(pdata->overcurrent_pin[i])) {
err = PTR_ERR(pdata->overcurrent_pin[i]);
dev_err(&pdev->dev, "unable to claim gpio \"overcurrent\": %d\n", err);
--
2.17.1
From: Jorgen Hansen <[email protected]>
[ Upstream commit 11924ba5e671d6caef1516923e2bd8c72929a3fe ]
When adding a VMCI resource, the check for an existing entry
would ignore that the new entry could be a wildcard. This could
result in multiple resource entries that would match a given
handle. One disastrous outcome of this is that the
refcounting used to ensure that delayed callbacks for VMCI
datagrams have run before the datagram is destroyed can be
wrong, since the refcount could be increased on the duplicate
entry. This in turn leads to a use after free bug. This issue
was discovered by Hangbin Liu using KASAN and syzkaller.
Fixes: bc63dedb7d46 ("VMCI: resource object implementation")
Reported-by: Hangbin Liu <[email protected]>
Reviewed-by: Adit Ranadive <[email protected]>
Reviewed-by: Vishnu Dasa <[email protected]>
Signed-off-by: Jorgen Hansen <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/misc/vmw_vmci/vmci_driver.c | 2 +-
drivers/misc/vmw_vmci/vmci_resource.c | 3 ++-
2 files changed, 3 insertions(+), 2 deletions(-)
diff --git a/drivers/misc/vmw_vmci/vmci_driver.c b/drivers/misc/vmw_vmci/vmci_driver.c
index d7eaf1eb11e7..003bfba40758 100644
--- a/drivers/misc/vmw_vmci/vmci_driver.c
+++ b/drivers/misc/vmw_vmci/vmci_driver.c
@@ -113,5 +113,5 @@ module_exit(vmci_drv_exit);
MODULE_AUTHOR("VMware, Inc.");
MODULE_DESCRIPTION("VMware Virtual Machine Communication Interface.");
-MODULE_VERSION("1.1.5.0-k");
+MODULE_VERSION("1.1.6.0-k");
MODULE_LICENSE("GPL v2");
diff --git a/drivers/misc/vmw_vmci/vmci_resource.c b/drivers/misc/vmw_vmci/vmci_resource.c
index 1ab6e8737a5f..da1ee2e1ba99 100644
--- a/drivers/misc/vmw_vmci/vmci_resource.c
+++ b/drivers/misc/vmw_vmci/vmci_resource.c
@@ -57,7 +57,8 @@ static struct vmci_resource *vmci_resource_lookup(struct vmci_handle handle,
if (r->type == type &&
rid == handle.resource &&
- (cid == handle.context || cid == VMCI_INVALID_ID)) {
+ (cid == handle.context || cid == VMCI_INVALID_ID ||
+ handle.context == VMCI_INVALID_ID)) {
resource = r;
break;
}
--
2.17.1
From: Denis Drozdov <[email protected]>
[ Upstream commit 4d6e4d12da2c308f8f976d3955c45ee62539ac98 ]
IPCB should be cleared before icmp_send, since it may contain data from
previous layers and the data could be misinterpreted as ip header options,
which later caused the ihl to be set to an invalid value and resulted in
the following stack corruption:
[ 1083.031512] ib0: packet len 57824 (> 2048) too long to send, dropping
[ 1083.031843] ib0: packet len 37904 (> 2048) too long to send, dropping
[ 1083.032004] ib0: packet len 4040 (> 2048) too long to send, dropping
[ 1083.032253] ib0: packet len 63800 (> 2048) too long to send, dropping
[ 1083.032481] ib0: packet len 23960 (> 2048) too long to send, dropping
[ 1083.033149] ib0: packet len 63800 (> 2048) too long to send, dropping
[ 1083.033439] ib0: packet len 63800 (> 2048) too long to send, dropping
[ 1083.033700] ib0: packet len 63800 (> 2048) too long to send, dropping
[ 1083.034124] ib0: packet len 63800 (> 2048) too long to send, dropping
[ 1083.034387] ==================================================================
[ 1083.034602] BUG: KASAN: stack-out-of-bounds in __ip_options_echo+0xf08/0x1310
[ 1083.034798] Write of size 4 at addr ffff880353457c5f by task kworker/u16:0/7
[ 1083.034990]
[ 1083.035104] CPU: 7 PID: 7 Comm: kworker/u16:0 Tainted: G O 4.19.0-rc5+ #1
[ 1083.035316] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu2 04/01/2014
[ 1083.035573] Workqueue: ipoib_wq ipoib_cm_skb_reap [ib_ipoib]
[ 1083.035750] Call Trace:
[ 1083.035888] dump_stack+0x9a/0xeb
[ 1083.036031] print_address_description+0xe3/0x2e0
[ 1083.036213] kasan_report+0x18a/0x2e0
[ 1083.036356] ? __ip_options_echo+0xf08/0x1310
[ 1083.036522] __ip_options_echo+0xf08/0x1310
[ 1083.036688] icmp_send+0x7b9/0x1cd0
[ 1083.036843] ? icmp_route_lookup.constprop.9+0x1070/0x1070
[ 1083.037018] ? netif_schedule_queue+0x5/0x200
[ 1083.037180] ? debug_show_all_locks+0x310/0x310
[ 1083.037341] ? rcu_dynticks_curr_cpu_in_eqs+0x85/0x120
[ 1083.037519] ? debug_locks_off+0x11/0x80
[ 1083.037673] ? debug_check_no_obj_freed+0x207/0x4c6
[ 1083.037841] ? check_flags.part.27+0x450/0x450
[ 1083.037995] ? debug_check_no_obj_freed+0xc3/0x4c6
[ 1083.038169] ? debug_locks_off+0x11/0x80
[ 1083.038318] ? skb_dequeue+0x10e/0x1a0
[ 1083.038476] ? ipoib_cm_skb_reap+0x2b5/0x650 [ib_ipoib]
[ 1083.038642] ? netif_schedule_queue+0xa8/0x200
[ 1083.038820] ? ipoib_cm_skb_reap+0x544/0x650 [ib_ipoib]
[ 1083.038996] ipoib_cm_skb_reap+0x544/0x650 [ib_ipoib]
[ 1083.039174] process_one_work+0x912/0x1830
[ 1083.039336] ? wq_pool_ids_show+0x310/0x310
[ 1083.039491] ? lock_acquire+0x145/0x3a0
[ 1083.042312] worker_thread+0x87/0xbb0
[ 1083.045099] ? process_one_work+0x1830/0x1830
[ 1083.047865] kthread+0x322/0x3e0
[ 1083.050624] ? kthread_create_worker_on_cpu+0xc0/0xc0
[ 1083.053354] ret_from_fork+0x3a/0x50
For instance __ip_options_echo is failing to proceed with invalid srr and
optlen passed from another layer via IPCB
[ 762.139568] IPv4: __ip_options_echo rr=0 ts=0 srr=43 cipso=0
[ 762.139720] IPv4: ip_options_build: IPCB 00000000f3cd969e opt 000000002ccb3533
[ 762.139838] IPv4: __ip_options_echo in srr: optlen 197 soffset 84
[ 762.139852] IPv4: ip_options_build srr=0 is_frag=0 rr_needaddr=0 ts_needaddr=0 ts_needtime=0 rr=0 ts=0
[ 762.140269] ==================================================================
[ 762.140713] IPv4: __ip_options_echo rr=0 ts=0 srr=0 cipso=0
[ 762.141078] BUG: KASAN: stack-out-of-bounds in __ip_options_echo+0x12ec/0x1680
[ 762.141087] Write of size 4 at addr ffff880353457c7f by task kworker/u16:0/7
Signed-off-by: Denis Drozdov <[email protected]>
Reviewed-by: Erez Shitrit <[email protected]>
Reviewed-by: Feras Daoud <[email protected]>
Signed-off-by: Leon Romanovsky <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/infiniband/ulp/ipoib/ipoib_cm.c | 8 ++++++--
1 file changed, 6 insertions(+), 2 deletions(-)
diff --git a/drivers/infiniband/ulp/ipoib/ipoib_cm.c b/drivers/infiniband/ulp/ipoib/ipoib_cm.c
index 3d5424f335cb..0428e01e8f69 100644
--- a/drivers/infiniband/ulp/ipoib/ipoib_cm.c
+++ b/drivers/infiniband/ulp/ipoib/ipoib_cm.c
@@ -1438,11 +1438,15 @@ static void ipoib_cm_skb_reap(struct work_struct *work)
spin_unlock_irqrestore(&priv->lock, flags);
netif_tx_unlock_bh(dev);
- if (skb->protocol == htons(ETH_P_IP))
+ if (skb->protocol == htons(ETH_P_IP)) {
+ memset(IPCB(skb), 0, sizeof(*IPCB(skb)));
icmp_send(skb, ICMP_DEST_UNREACH, ICMP_FRAG_NEEDED, htonl(mtu));
+ }
#if IS_ENABLED(CONFIG_IPV6)
- else if (skb->protocol == htons(ETH_P_IPV6))
+ else if (skb->protocol == htons(ETH_P_IPV6)) {
+ memset(IP6CB(skb), 0, sizeof(*IP6CB(skb)));
icmpv6_send(skb, ICMPV6_PKT_TOOBIG, 0, mtu);
+ }
#endif
dev_kfree_skb_any(skb);
--
2.17.1
From: Parav Pandit <[email protected]>
[ Upstream commit 0f6ef65d1c6ec8deb5d0f11f86631ec4cfe8f22e ]
If the provider driver (such as rdma_rxe) doesn't support pma counters,
avoid exposing its directory similar to optional hw_counters directory.
If core fails to read the PMA counter, return an error so that user can
retry later if needed.
Fixes: 35c4cbb17811 ("IB/core: Create get_perf_mad function in sysfs.c")
Reported-by: Holger Hoffstätte <[email protected]>
Tested-by: Holger Hoffstätte <[email protected]>
Signed-off-by: Parav Pandit <[email protected]>
Signed-off-by: Leon Romanovsky <[email protected]>
Signed-off-by: Doug Ledford <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/infiniband/core/sysfs.c | 19 ++++++++++++-------
1 file changed, 12 insertions(+), 7 deletions(-)
diff --git a/drivers/infiniband/core/sysfs.c b/drivers/infiniband/core/sysfs.c
index 7fd14ead7b37..ace40bb98624 100644
--- a/drivers/infiniband/core/sysfs.c
+++ b/drivers/infiniband/core/sysfs.c
@@ -512,7 +512,7 @@ static ssize_t show_pma_counter(struct ib_port *p, struct port_attribute *attr,
ret = get_perf_mad(p->ibdev, p->port_num, tab_attr->attr_id, &data,
40 + offset / 8, sizeof(data));
if (ret < 0)
- return sprintf(buf, "N/A (no PMA)\n");
+ return ret;
switch (width) {
case 4:
@@ -1057,10 +1057,12 @@ static int add_port(struct ib_device *device, int port_num,
goto err_put;
}
- p->pma_table = get_counter_table(device, port_num);
- ret = sysfs_create_group(&p->kobj, p->pma_table);
- if (ret)
- goto err_put_gid_attrs;
+ if (device->process_mad) {
+ p->pma_table = get_counter_table(device, port_num);
+ ret = sysfs_create_group(&p->kobj, p->pma_table);
+ if (ret)
+ goto err_put_gid_attrs;
+ }
p->gid_group.name = "gids";
p->gid_group.attrs = alloc_group_attrs(show_port_gid, attr.gid_tbl_len);
@@ -1173,7 +1175,8 @@ static int add_port(struct ib_device *device, int port_num,
p->gid_group.attrs = NULL;
err_remove_pma:
- sysfs_remove_group(&p->kobj, p->pma_table);
+ if (p->pma_table)
+ sysfs_remove_group(&p->kobj, p->pma_table);
err_put_gid_attrs:
kobject_put(&p->gid_attr_group->kobj);
@@ -1285,7 +1288,9 @@ static void free_port_list_attributes(struct ib_device *device)
kfree(port->hw_stats);
free_hsag(&port->kobj, port->hw_stats_ag);
}
- sysfs_remove_group(p, port->pma_table);
+
+ if (port->pma_table)
+ sysfs_remove_group(p, port->pma_table);
sysfs_remove_group(p, &port->pkey_group);
sysfs_remove_group(p, &port->gid_group);
sysfs_remove_group(&port->gid_attr_group->kobj,
--
2.17.1
From: Honghui Zhang <[email protected]>
[ Upstream commit 074d6f32689ce05a084b6fa3db38445745bf11cc ]
The Mediatek's host controller has two slots, each with its own control
registers. The host driver needs to identify what slot is connected to
what port in order to access the device's configuration space.
Current code retrieving slot connected to a given endpoint device.
Assuming each slot is connected to one endpoint device as below:
host bridge
bus 0 --> __________|_______
| |
| |
slot 0 slot 1
bus 1 -->| bus 2 --> |
| |
EP 0 EP 1
During PCI enumeration, system software will scan all the PCI devices on
every bus starting from devfn 0. Using PCI_SLOT(devfn) for matching an
endpoint to its slot is erroneous in that the devfn does not contain the
hierarchical bus numbering in it. In order to match an endpoint with its
slot (and related port), the PCI tree must be walked up to the root bus
(where the root ports are situated) and then the PCI_SLOT(devfn)
matching logic can be correctly applied for matching.
This patch fixes the mtk_pcie_find_port() slot matching logic by adding
appropriate PCI tree walking code to retrieve the slot/port a given
endpoint is connected to.
Signed-off-by: Honghui Zhang <[email protected]>
[[email protected]: rewrote the commit log]
Signed-off-by: Lorenzo Pieralisi <[email protected]>
Acked-by: Ryder Lee <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/pci/controller/pcie-mediatek.c | 11 +++++++++++
1 file changed, 11 insertions(+)
diff --git a/drivers/pci/controller/pcie-mediatek.c b/drivers/pci/controller/pcie-mediatek.c
index 861dda69f366..c5ff6ca65eab 100644
--- a/drivers/pci/controller/pcie-mediatek.c
+++ b/drivers/pci/controller/pcie-mediatek.c
@@ -337,6 +337,17 @@ static struct mtk_pcie_port *mtk_pcie_find_port(struct pci_bus *bus,
{
struct mtk_pcie *pcie = bus->sysdata;
struct mtk_pcie_port *port;
+ struct pci_dev *dev = NULL;
+
+ /*
+ * Walk the bus hierarchy to get the devfn value
+ * of the port in the root bus.
+ */
+ while (bus && bus->number) {
+ dev = bus->self;
+ bus = dev->bus;
+ devfn = dev->devfn;
+ }
list_for_each_entry(port, &pcie->ports, list)
if (port->slot == PCI_SLOT(devfn))
--
2.17.1
From: Jim Mattson <[email protected]>
[ Upstream commit cfb634fe3052aefc4e1360fa322018c9a0b49755 ]
According to volume 3 of the SDM, bits 63:15 and 12:4 of the exit
qualification field for debug exceptions are reserved (cleared to
0). However, the SDM is incorrect about bit 16 (corresponding to
DR6.RTM). This bit should be set if a debug exception (#DB) or a
breakpoint exception (#BP) occurred inside an RTM region while
advanced debugging of RTM transactional regions was enabled. Note that
this is the opposite of DR6.RTM, which "indicates (when clear) that a
debug exception (#DB) or breakpoint exception (#BP) occurred inside an
RTM region while advanced debugging of RTM transactional regions was
enabled."
There is still an issue with stale DR6 bits potentially being
misreported for the current debug exception. DR6 should not have been
modified before vectoring the #DB exception, and the "new DR6 bits"
should be available somewhere, but it was and they aren't.
Fixes: b96fb439774e1 ("KVM: nVMX: fixes to nested virt interrupt injection")
Signed-off-by: Jim Mattson <[email protected]>
Reviewed-by: Sean Christopherson <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/x86/include/asm/kvm_host.h | 1 +
arch/x86/kvm/vmx.c | 7 +++++--
2 files changed, 6 insertions(+), 2 deletions(-)
diff --git a/arch/x86/include/asm/kvm_host.h b/arch/x86/include/asm/kvm_host.h
index 09b2e3e2cf1b..1c09a0d1771f 100644
--- a/arch/x86/include/asm/kvm_host.h
+++ b/arch/x86/include/asm/kvm_host.h
@@ -177,6 +177,7 @@ enum {
#define DR6_BD (1 << 13)
#define DR6_BS (1 << 14)
+#define DR6_BT (1 << 15)
#define DR6_RTM (1 << 16)
#define DR6_FIXED_1 0xfffe0ff0
#define DR6_INIT 0xffff0ff0
diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c
index e665aa7167cf..a933ce5ec1ff 100644
--- a/arch/x86/kvm/vmx.c
+++ b/arch/x86/kvm/vmx.c
@@ -3294,10 +3294,13 @@ static int nested_vmx_check_exception(struct kvm_vcpu *vcpu, unsigned long *exit
}
} else {
if (vmcs12->exception_bitmap & (1u << nr)) {
- if (nr == DB_VECTOR)
+ if (nr == DB_VECTOR) {
*exit_qual = vcpu->arch.dr6;
- else
+ *exit_qual &= ~(DR6_FIXED_1 | DR6_BT);
+ *exit_qual ^= DR6_RTM;
+ } else {
*exit_qual = 0;
+ }
return 1;
}
}
--
2.17.1
From: Jaegeuk Kim <[email protected]>
[ Upstream commit fb7d70db305a1446864227abf711b756568f8242 ]
When running fault injection test, I hit somewhat wrong behavior in f2fs_gc ->
gc_data_segment():
0. fault injection generated some PageError'ed pages
1. gc_data_segment
-> f2fs_get_read_data_page(REQ_RAHEAD)
2. move_data_page
-> f2fs_get_lock_data_page()
-> f2f_get_read_data_page()
-> f2fs_submit_page_read()
-> submit_bio(READ)
-> return EIO due to PageError
-> fail to move data
Signed-off-by: Jaegeuk Kim <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/f2fs/data.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/fs/f2fs/data.c b/fs/f2fs/data.c
index cd5d53353a61..f79fb3aa5ae3 100644
--- a/fs/f2fs/data.c
+++ b/fs/f2fs/data.c
@@ -80,7 +80,8 @@ static void __read_end_io(struct bio *bio)
/* PG_error was set if any post_read step failed */
if (bio->bi_status || PageError(page)) {
ClearPageUptodate(page);
- SetPageError(page);
+ /* will re-read again later */
+ ClearPageError(page);
} else {
SetPageUptodate(page);
}
@@ -590,6 +591,7 @@ static int f2fs_submit_page_read(struct inode *inode, struct page *page,
bio_put(bio);
return -EFAULT;
}
+ ClearPageError(page);
__submit_bio(F2FS_I_SB(inode), bio, DATA);
return 0;
}
@@ -1565,6 +1567,7 @@ static int f2fs_mpage_readpages(struct address_space *mapping,
if (bio_add_page(bio, page, blocksize, 0) < blocksize)
goto submit_and_realloc;
+ ClearPageError(page);
last_block_in_bio = block_nr;
goto next_page;
set_error_page:
--
2.17.1
From: Wenwen Wang <[email protected]>
[ Upstream commit 47db7873136a9c57c45390a53b57019cf73c8259 ]
In megasas_mgmt_compat_ioctl_fw(), to handle the structure
compat_megasas_iocpacket 'cioc', a user-space structure megasas_iocpacket
'ioc' is allocated before megasas_mgmt_ioctl_fw() is invoked to handle
the packet. Since the two data structures have different fields, the data
is copied from 'cioc' to 'ioc' field by field. In the copy process,
'sense_ptr' is prepared if the field 'sense_len' is not null, because it
will be used in megasas_mgmt_ioctl_fw(). To prepare 'sense_ptr', the
user-space data 'ioc->sense_off' and 'cioc->sense_off' are copied and
saved to kernel-space variables 'local_sense_off' and 'user_sense_off'
respectively. Given that 'ioc->sense_off' is also copied from
'cioc->sense_off', 'local_sense_off' and 'user_sense_off' should have the
same value. However, 'cioc' is in the user space and a malicious user can
race to change the value of 'cioc->sense_off' after it is copied to
'ioc->sense_off' but before it is copied to 'user_sense_off'. By doing
so, the attacker can inject different values into 'local_sense_off' and
'user_sense_off'. This can cause undefined behavior in the following
execution, because the two variables are supposed to be same.
This patch enforces a check on the two kernel variables 'local_sense_off'
and 'user_sense_off' to make sure they are the same after the copy. In
case they are not, an error code EINVAL will be returned.
Signed-off-by: Wenwen Wang <[email protected]>
Acked-by: Sumit Saxena <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/scsi/megaraid/megaraid_sas_base.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/scsi/megaraid/megaraid_sas_base.c b/drivers/scsi/megaraid/megaraid_sas_base.c
index 9aa9590c5373..f6de7526ded5 100644
--- a/drivers/scsi/megaraid/megaraid_sas_base.c
+++ b/drivers/scsi/megaraid/megaraid_sas_base.c
@@ -7523,6 +7523,9 @@ static int megasas_mgmt_compat_ioctl_fw(struct file *file, unsigned long arg)
get_user(user_sense_off, &cioc->sense_off))
return -EFAULT;
+ if (local_sense_off != user_sense_off)
+ return -EINVAL;
+
if (local_sense_len) {
void __user **sense_ioc_ptr =
(void __user **)((u8 *)((unsigned long)&ioc->frame.raw) + local_sense_off);
--
2.17.1
From: Xiao Ni <[email protected]>
[ Upstream commit af9b926de9c5986ab009e64917de87c9758bab10 ]
flush_pool is leaked when flush bio size is zero
Fixes: 5a409b4f56d5 ("MD: fix lock contention for flush bios")
Signed-off-by: David Jeffery <[email protected]>
Signed-off-by: Xiao Ni <[email protected]>
Signed-off-by: Shaohua Li <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/md/md.c | 10 ++++++----
1 file changed, 6 insertions(+), 4 deletions(-)
diff --git a/drivers/md/md.c b/drivers/md/md.c
index 63ceabb4e020..06f68f19b5f3 100644
--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -452,10 +452,11 @@ static void md_end_flush(struct bio *fbio)
rdev_dec_pending(rdev, mddev);
if (atomic_dec_and_test(&fi->flush_pending)) {
- if (bio->bi_iter.bi_size == 0)
+ if (bio->bi_iter.bi_size == 0) {
/* an empty barrier - all done */
bio_endio(bio);
- else {
+ mempool_free(fi, mddev->flush_pool);
+ } else {
INIT_WORK(&fi->flush_work, submit_flushes);
queue_work(md_wq, &fi->flush_work);
}
@@ -509,10 +510,11 @@ void md_flush_request(struct mddev *mddev, struct bio *bio)
rcu_read_unlock();
if (atomic_dec_and_test(&fi->flush_pending)) {
- if (bio->bi_iter.bi_size == 0)
+ if (bio->bi_iter.bi_size == 0) {
/* an empty barrier - all done */
bio_endio(bio);
- else {
+ mempool_free(fi, mddev->flush_pool);
+ } else {
INIT_WORK(&fi->flush_work, submit_flushes);
queue_work(md_wq, &fi->flush_work);
}
--
2.17.1
From: Rob Herring <[email protected]>
[ Upstream commit 173ee3962959a1985a109f81539a403b5cd07ae7 ]
Commit f42b0e18f2e5 ("of: add node name compare helper functions")
failed to add the module exports to of_node_name_eq() and
of_node_name_prefix(). Add them now.
Fixes: f42b0e18f2e5 ("of: add node name compare helper functions")
Signed-off-by: Rob Herring <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/of/base.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/of/base.c b/drivers/of/base.c
index 74eaedd5b860..70f5fd08891b 100644
--- a/drivers/of/base.c
+++ b/drivers/of/base.c
@@ -67,6 +67,7 @@ bool of_node_name_eq(const struct device_node *np, const char *name)
return (strlen(name) == len) && (strncmp(node_name, name, len) == 0);
}
+EXPORT_SYMBOL(of_node_name_eq);
bool of_node_name_prefix(const struct device_node *np, const char *prefix)
{
@@ -75,6 +76,7 @@ bool of_node_name_prefix(const struct device_node *np, const char *prefix)
return strncmp(kbasename(np->full_name), prefix, strlen(prefix)) == 0;
}
+EXPORT_SYMBOL(of_node_name_prefix);
int of_n_addr_cells(struct device_node *np)
{
--
2.17.1
From: Alan Douglas <[email protected]>
[ Upstream commit 0652d4b6b56f73c81abbdbc7e26f772cb2dfe370 ]
The IRQ physical address is allocated from region 0, rather than
the highest region. Update the driver to reserve this region in
the bitmap and to use region 0 for all types of interrupt.
This corrects a problem which prevents the interrupt being
signalled correctly if using the first address in the AXI region,
since an offset of zero will always be mapped to region 0.
Fixes: 37dddf14f1ae ("PCI: cadence: Add EndPoint Controller driver for Cadence PCIe controller")
Signed-off-by: Alan Douglas <[email protected]>
Signed-off-by: Lorenzo Pieralisi <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/pci/controller/pcie-cadence-ep.c | 11 ++++++-----
1 file changed, 6 insertions(+), 5 deletions(-)
diff --git a/drivers/pci/controller/pcie-cadence-ep.c b/drivers/pci/controller/pcie-cadence-ep.c
index 9e87dd7f9ac3..6692654798d4 100644
--- a/drivers/pci/controller/pcie-cadence-ep.c
+++ b/drivers/pci/controller/pcie-cadence-ep.c
@@ -258,7 +258,6 @@ static void cdns_pcie_ep_assert_intx(struct cdns_pcie_ep *ep, u8 fn,
u8 intx, bool is_asserted)
{
struct cdns_pcie *pcie = &ep->pcie;
- u32 r = ep->max_regions - 1;
u32 offset;
u16 status;
u8 msg_code;
@@ -268,8 +267,8 @@ static void cdns_pcie_ep_assert_intx(struct cdns_pcie_ep *ep, u8 fn,
/* Set the outbound region if needed. */
if (unlikely(ep->irq_pci_addr != CDNS_PCIE_EP_IRQ_PCI_ADDR_LEGACY ||
ep->irq_pci_fn != fn)) {
- /* Last region was reserved for IRQ writes. */
- cdns_pcie_set_outbound_region_for_normal_msg(pcie, fn, r,
+ /* First region was reserved for IRQ writes. */
+ cdns_pcie_set_outbound_region_for_normal_msg(pcie, fn, 0,
ep->irq_phys_addr);
ep->irq_pci_addr = CDNS_PCIE_EP_IRQ_PCI_ADDR_LEGACY;
ep->irq_pci_fn = fn;
@@ -347,8 +346,8 @@ static int cdns_pcie_ep_send_msi_irq(struct cdns_pcie_ep *ep, u8 fn,
/* Set the outbound region if needed. */
if (unlikely(ep->irq_pci_addr != (pci_addr & ~pci_addr_mask) ||
ep->irq_pci_fn != fn)) {
- /* Last region was reserved for IRQ writes. */
- cdns_pcie_set_outbound_region(pcie, fn, ep->max_regions - 1,
+ /* First region was reserved for IRQ writes. */
+ cdns_pcie_set_outbound_region(pcie, fn, 0,
false,
ep->irq_phys_addr,
pci_addr & ~pci_addr_mask,
@@ -517,6 +516,8 @@ static int cdns_pcie_ep_probe(struct platform_device *pdev)
goto free_epc_mem;
}
ep->irq_pci_addr = CDNS_PCIE_EP_IRQ_PCI_ADDR_NONE;
+ /* Reserve region 0 for IRQs */
+ set_bit(0, &ep->ob_region_map);
return 0;
--
2.17.1
From: Finn Thain <[email protected]>
[ Upstream commit fd47d919d0c336e7c22862b51ee94927ffea227a ]
If a target disconnects during a PIO data transfer the command may fail
when the target reconnects:
scsi host1: DMA length is zero!
scsi host1: cur adr[04380000] len[00000000]
The scsi bus is then reset. This happens because the residual reached
zero before the transfer was completed.
The usual residual calculation relies on the Transfer Count registers.
That works for DMA transfers but not for PIO transfers. Fix the problem
by storing the PIO transfer residual and using that to correctly
calculate bytes_sent.
Fixes: 6fe07aaffbf0 ("[SCSI] m68k: new mac_esp scsi driver")
Tested-by: Stan Johnson <[email protected]>
Signed-off-by: Finn Thain <[email protected]>
Tested-by: Michael Schmitz <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/scsi/esp_scsi.c | 1 +
drivers/scsi/esp_scsi.h | 2 ++
drivers/scsi/mac_esp.c | 2 ++
3 files changed, 5 insertions(+)
diff --git a/drivers/scsi/esp_scsi.c b/drivers/scsi/esp_scsi.c
index c3fc34b9964d..9e5d3f7d29ae 100644
--- a/drivers/scsi/esp_scsi.c
+++ b/drivers/scsi/esp_scsi.c
@@ -1338,6 +1338,7 @@ static int esp_data_bytes_sent(struct esp *esp, struct esp_cmd_entry *ent,
bytes_sent = esp->data_dma_len;
bytes_sent -= ecount;
+ bytes_sent -= esp->send_cmd_residual;
/*
* The am53c974 has a DMA 'pecularity'. The doc states:
diff --git a/drivers/scsi/esp_scsi.h b/drivers/scsi/esp_scsi.h
index 8163dca2071b..a77772777a30 100644
--- a/drivers/scsi/esp_scsi.h
+++ b/drivers/scsi/esp_scsi.h
@@ -540,6 +540,8 @@ struct esp {
void *dma;
int dmarev;
+
+ u32 send_cmd_residual;
};
/* A front-end driver for the ESP chip should do the following in
diff --git a/drivers/scsi/mac_esp.c b/drivers/scsi/mac_esp.c
index eb551f3cc471..71879f2207e0 100644
--- a/drivers/scsi/mac_esp.c
+++ b/drivers/scsi/mac_esp.c
@@ -427,6 +427,8 @@ static void mac_esp_send_pio_cmd(struct esp *esp, u32 addr, u32 esp_count,
scsi_esp_cmd(esp, ESP_CMD_TI);
}
}
+
+ esp->send_cmd_residual = esp_count;
}
static int mac_esp_irq_pending(struct esp *esp)
--
2.17.1
From: Chao Yu <[email protected]>
[ Upstream commit 78efac537de33faab9a4302cc05a70bb4a8b3b63 ]
Now, we have supported cgroup writeback, it depends on correctly IO
account of specified filesystem.
But in commit d1b3e72d5490 ("f2fs: submit bio of in-place-update pages"),
we split write paths from f2fs_submit_page_mbio() to two:
- f2fs_submit_page_bio() for IPU path
- f2fs_submit_page_bio() for OPU path
But still we account write IO only in f2fs_submit_page_mbio(), result in
incorrect IO account, fix it by adding missing IO account in IPU path.
Fixes: d1b3e72d5490 ("f2fs: submit bio of in-place-update pages")
Signed-off-by: Chao Yu <[email protected]>
Signed-off-by: Jaegeuk Kim <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/f2fs/data.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/fs/f2fs/data.c b/fs/f2fs/data.c
index 382c1ef9a9e4..cd5d53353a61 100644
--- a/fs/f2fs/data.c
+++ b/fs/f2fs/data.c
@@ -456,6 +456,10 @@ int f2fs_submit_page_bio(struct f2fs_io_info *fio)
bio_put(bio);
return -EFAULT;
}
+
+ if (fio->io_wbc && !is_read_io(fio->op))
+ wbc_account_io(fio->io_wbc, page, PAGE_SIZE);
+
bio_set_op_attrs(bio, fio->op, fio->op_flags);
__submit_bio(fio->sbi, bio, fio->type);
--
2.17.1
From: Johan Hovold <[email protected]>
[ Upstream commit ac63043d8cb5503c7e0fe110f947eacf2663804e ]
Use the new of_get_compatible_child() helper to lookup the mdio-internal
child node instead of using of_find_compatible_node(), which searches
the entire tree from a given start node and thus can return an unrelated
(i.e. non-child) node.
This also addresses a potential use-after-free (e.g. after probe
deferral) as the tree-wide helper drops a reference to its first
argument (i.e. the mdio-mux node). Fortunately, this was inadvertently
balanced by a failure to drop the mdio-mux reference after lookup.
While at it, also fix the related mdio-internal- and phy-node reference
leaks.
Fixes: 634db83b8265 ("net: stmmac: dwmac-sun8i: Handle integrated/external MDIOs")
Tested-by: Corentin Labbe <[email protected]>
Cc: Andrew Lunn <[email protected]>
Cc: Giuseppe Cavallaro <[email protected]>
Cc: Alexandre Torgue <[email protected]>
Cc: Jose Abreu <[email protected]>
Cc: David S. Miller <[email protected]>
Signed-off-by: Johan Hovold <[email protected]>
Signed-off-by: Rob Herring <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c | 12 ++++++++++--
1 file changed, 10 insertions(+), 2 deletions(-)
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c
index f9a61f90cfbc..0f660af01a4b 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c
@@ -714,8 +714,9 @@ static int get_ephy_nodes(struct stmmac_priv *priv)
return -ENODEV;
}
- mdio_internal = of_find_compatible_node(mdio_mux, NULL,
+ mdio_internal = of_get_compatible_child(mdio_mux,
"allwinner,sun8i-h3-mdio-internal");
+ of_node_put(mdio_mux);
if (!mdio_internal) {
dev_err(priv->device, "Cannot get internal_mdio node\n");
return -ENODEV;
@@ -729,13 +730,20 @@ static int get_ephy_nodes(struct stmmac_priv *priv)
gmac->rst_ephy = of_reset_control_get_exclusive(iphynode, NULL);
if (IS_ERR(gmac->rst_ephy)) {
ret = PTR_ERR(gmac->rst_ephy);
- if (ret == -EPROBE_DEFER)
+ if (ret == -EPROBE_DEFER) {
+ of_node_put(iphynode);
+ of_node_put(mdio_internal);
return ret;
+ }
continue;
}
dev_info(priv->device, "Found internal PHY node\n");
+ of_node_put(iphynode);
+ of_node_put(mdio_internal);
return 0;
}
+
+ of_node_put(mdio_internal);
return -ENODEV;
}
--
2.17.1
From: Selvin Xavier <[email protected]>
[ Upstream commit ed51efd2ce44091a858ad829f666727e7c95695e ]
In the failure path, nq->bar_reg_iomem gets accessed without
initializing. Avoid this by calling the bnxt_qplib_nq_stop_irq only if the
initialization is complete.
Reported-by: Dan Carpenter <[email protected]>
Fixes: 1ac5a4047975 ("RDMA/bnxt_re: Add bnxt_re RoCE driver")
Fixes: 6e04b1035689 ("RDMA/bnxt_re: Fix broken RoCE driver due to recent L2 driver changes")
Signed-off-by: Selvin Xavier <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/infiniband/hw/bnxt_re/qplib_fp.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/infiniband/hw/bnxt_re/qplib_fp.c b/drivers/infiniband/hw/bnxt_re/qplib_fp.c
index 6ad0d46ab879..249efa0a6aba 100644
--- a/drivers/infiniband/hw/bnxt_re/qplib_fp.c
+++ b/drivers/infiniband/hw/bnxt_re/qplib_fp.c
@@ -360,7 +360,8 @@ void bnxt_qplib_disable_nq(struct bnxt_qplib_nq *nq)
}
/* Make sure the HW is stopped! */
- bnxt_qplib_nq_stop_irq(nq, true);
+ if (nq->requested)
+ bnxt_qplib_nq_stop_irq(nq, true);
if (nq->bar_reg_iomem)
iounmap(nq->bar_reg_iomem);
--
2.17.1
From: Leon Romanovsky <[email protected]>
[ Upstream commit e54b6a3bcd1ec972b25a164bdf495d9e7120b107 ]
Add missing check for failure of cm_init_av_by_path
Fixes: e1444b5a163e ("IB/cm: Fix automatic path migration support")
Reported-by: Slava Shwartsman <[email protected]>
Reviewed-by: Parav Pandit <[email protected]>
Signed-off-by: Leon Romanovsky <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/infiniband/core/cm.c | 7 +++++--
1 file changed, 5 insertions(+), 2 deletions(-)
diff --git a/drivers/infiniband/core/cm.c b/drivers/infiniband/core/cm.c
index 6e39c27dca8e..4c533275d1f2 100644
--- a/drivers/infiniband/core/cm.c
+++ b/drivers/infiniband/core/cm.c
@@ -3292,8 +3292,11 @@ static int cm_lap_handler(struct cm_work *work)
if (ret)
goto unlock;
- cm_init_av_by_path(param->alternate_path, NULL, &cm_id_priv->alt_av,
- cm_id_priv);
+ ret = cm_init_av_by_path(param->alternate_path, NULL,
+ &cm_id_priv->alt_av, cm_id_priv);
+ if (ret)
+ goto unlock;
+
cm_id_priv->id.lap_state = IB_CM_LAP_RCVD;
cm_id_priv->tid = lap_msg->hdr.tid;
ret = atomic_inc_and_test(&cm_id_priv->work_count);
--
2.17.1
From: David Howells <[email protected]>
[ Upstream commit 9607871f37dc3e717639694b8d0dc738f2a68efc ]
The following code in the linux/ndctl header file:
static inline const char *nvdimm_bus_cmd_name(unsigned cmd)
{
static const char * const names[] = {
[ND_CMD_ARS_CAP] = "ars_cap",
[ND_CMD_ARS_START] = "ars_start",
[ND_CMD_ARS_STATUS] = "ars_status",
[ND_CMD_CLEAR_ERROR] = "clear_error",
[ND_CMD_CALL] = "cmd_call",
};
if (cmd < ARRAY_SIZE(names) && names[cmd])
return names[cmd];
return "unknown";
}
is broken in a number of ways:
(1) ARRAY_SIZE() is not generally defined.
(2) g++ does not support "non-trivial" array initialisers fully yet.
(3) Every file that calls this function will acquire a copy of names[].
The same goes for nvdimm_cmd_name().
Fix all three by converting to a switch statement where each case returns a
string. That way if cmd is a constant, the compiler can trivially reduce it
and, if not, the compiler can use a shared lookup table if it thinks that is
more efficient.
A better way would be to remove these functions and their arrays from the
header entirely.
Signed-off-by: David Howells <[email protected]>
Signed-off-by: Dan Williams <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
include/uapi/linux/ndctl.h | 48 +++++++++++++++++---------------------
1 file changed, 21 insertions(+), 27 deletions(-)
diff --git a/include/uapi/linux/ndctl.h b/include/uapi/linux/ndctl.h
index 7e27070b9440..2f2c43d633c5 100644
--- a/include/uapi/linux/ndctl.h
+++ b/include/uapi/linux/ndctl.h
@@ -128,37 +128,31 @@ enum {
static inline const char *nvdimm_bus_cmd_name(unsigned cmd)
{
- static const char * const names[] = {
- [ND_CMD_ARS_CAP] = "ars_cap",
- [ND_CMD_ARS_START] = "ars_start",
- [ND_CMD_ARS_STATUS] = "ars_status",
- [ND_CMD_CLEAR_ERROR] = "clear_error",
- [ND_CMD_CALL] = "cmd_call",
- };
-
- if (cmd < ARRAY_SIZE(names) && names[cmd])
- return names[cmd];
- return "unknown";
+ switch (cmd) {
+ case ND_CMD_ARS_CAP: return "ars_cap";
+ case ND_CMD_ARS_START: return "ars_start";
+ case ND_CMD_ARS_STATUS: return "ars_status";
+ case ND_CMD_CLEAR_ERROR: return "clear_error";
+ case ND_CMD_CALL: return "cmd_call";
+ default: return "unknown";
+ }
}
static inline const char *nvdimm_cmd_name(unsigned cmd)
{
- static const char * const names[] = {
- [ND_CMD_SMART] = "smart",
- [ND_CMD_SMART_THRESHOLD] = "smart_thresh",
- [ND_CMD_DIMM_FLAGS] = "flags",
- [ND_CMD_GET_CONFIG_SIZE] = "get_size",
- [ND_CMD_GET_CONFIG_DATA] = "get_data",
- [ND_CMD_SET_CONFIG_DATA] = "set_data",
- [ND_CMD_VENDOR_EFFECT_LOG_SIZE] = "effect_size",
- [ND_CMD_VENDOR_EFFECT_LOG] = "effect_log",
- [ND_CMD_VENDOR] = "vendor",
- [ND_CMD_CALL] = "cmd_call",
- };
-
- if (cmd < ARRAY_SIZE(names) && names[cmd])
- return names[cmd];
- return "unknown";
+ switch (cmd) {
+ case ND_CMD_SMART: return "smart";
+ case ND_CMD_SMART_THRESHOLD: return "smart_thresh";
+ case ND_CMD_DIMM_FLAGS: return "flags";
+ case ND_CMD_GET_CONFIG_SIZE: return "get_size";
+ case ND_CMD_GET_CONFIG_DATA: return "get_data";
+ case ND_CMD_SET_CONFIG_DATA: return "set_data";
+ case ND_CMD_VENDOR_EFFECT_LOG_SIZE: return "effect_size";
+ case ND_CMD_VENDOR_EFFECT_LOG: return "effect_log";
+ case ND_CMD_VENDOR: return "vendor";
+ case ND_CMD_CALL: return "cmd_call";
+ default: return "unknown";
+ }
}
#define ND_IOCTL 'N'
--
2.17.1
From: Martin Willi <[email protected]>
[ Upstream commit a9911937e7d332761e8c4fcbc7ba0426bdc3956f ]
When running in AP mode, ath10k sometimes suffers from TX credit
starvation. The issue is hard to reproduce and shows up once in a
few days, but has been repeatedly seen with QCA9882 and a large
range of firmwares, including 10.2.4.70.67.
Once the module is in this state, TX credits are never replenished,
which results in "SWBA overrun" errors, as no beacons can be sent.
Even worse, WMI commands run in a timeout while holding the conf
mutex for three seconds each, making any further operations slow
and the whole system unresponsive.
The firmware/driver never recovers from that state automatically,
and triggering TX flush or warm restarts won't work over WMI. So
issue a hardware restart if a WMI command times out due to missing
TX credits. This implies a connectivity outage of about 1.4s in AP
mode, but brings back the interface and the whole system to a usable
state. WMI command timeouts have not been seen in absent of this
specific issue, so taking such drastic actions seems legitimate.
Signed-off-by: Martin Willi <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/ath/ath10k/wmi.c | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/drivers/net/wireless/ath/ath10k/wmi.c b/drivers/net/wireless/ath/ath10k/wmi.c
index 1dced0dae9cd..9f31b9a10850 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.c
+++ b/drivers/net/wireless/ath/ath10k/wmi.c
@@ -1869,6 +1869,12 @@ int ath10k_wmi_cmd_send(struct ath10k *ar, struct sk_buff *skb, u32 cmd_id)
if (ret)
dev_kfree_skb_any(skb);
+ if (ret == -EAGAIN) {
+ ath10k_warn(ar, "wmi command %d timeout, restarting hardware\n",
+ cmd_id);
+ queue_work(ar->workqueue, &ar->restart_work);
+ }
+
return ret;
}
--
2.17.1
From: Michal Hocko <[email protected]>
[ Upstream commit a90e90b7d55e789c71d85b946ffb5c1ab2f137ca ]
We have seen a customer complaining about soft lockups on !PREEMPT
kernel config with 4.4 based kernel
[1072141.435366] NMI watchdog: BUG: soft lockup - CPU#21 stuck for 22s! [systemd:1]
[1072141.444090] Modules linked in: mpt3sas raid_class binfmt_misc af_packet 8021q garp mrp stp llc xfs libcrc32c bonding iscsi_ibft iscsi_boot_sysfs msr ext4 crc16 jbd2 mbcache cdc_ether usbnet mii joydev hid_generic usbhid intel_rapl x86_pkg_temp_thermal intel_powerclamp coretemp crct10dif_pclmul crc32_pclmul ghash_clmulni_intel ipmi_ssif mgag200 i2c_algo_bit ttm ipmi_devintf drbg ixgbe drm_kms_helper vxlan ansi_cprng ip6_udp_tunnel drm aesni_intel udp_tunnel aes_x86_64 iTCO_wdt syscopyarea ptp xhci_pci lrw iTCO_vendor_support pps_core gf128mul ehci_pci glue_helper sysfillrect mdio pcspkr sb_edac ablk_helper cryptd ehci_hcd sysimgblt xhci_hcd fb_sys_fops edac_core mei_me lpc_ich ses usbcore enclosure dca mfd_core ipmi_si mei i2c_i801 scsi_transport_sas usb_common ipmi_msghandler shpchp fjes wmi processor button acpi_pad btrfs xor raid6_pq sd_mod crc32c_intel megaraid_sas sg dm_multipath dm_mod scsi_dh_rdac scsi_dh_emc scsi_dh_alua scsi_mod md_mod autofs4
[1072141.444146] Supported: Yes
[1072141.444149] CPU: 21 PID: 1 Comm: systemd Not tainted 4.4.121-92.80-default #1
[1072141.444150] Hardware name: LENOVO Lenovo System x3650 M5 -[5462P4U]- -[5462P4U]-/01GR451, BIOS -[TCE136H-2.70]- 06/13/2018
[1072141.444151] task: ffff880191bd0040 ti: ffff880191bd4000 task.ti: ffff880191bd4000
[1072141.444153] RIP: 0010:[<ffffffff815229f9>] [<ffffffff815229f9>] update_classid_sock+0x29/0x40
[1072141.444157] RSP: 0018:ffff880191bd7d58 EFLAGS: 00000286
[1072141.444158] RAX: ffff883b177cb7c0 RBX: 0000000000000000 RCX: 0000000000000000
[1072141.444159] RDX: 00000000000009c7 RSI: ffff880191bd7d5c RDI: ffff8822e29bb200
[1072141.444160] RBP: ffff883a72230980 R08: 0000000000000101 R09: 0000000000000000
[1072141.444161] R10: 0000000000000008 R11: f000000000000000 R12: ffffffff815229d0
[1072141.444162] R13: 0000000000000000 R14: ffff881fd0a47ac0 R15: ffff880191bd7f28
[1072141.444163] FS: 00007f3e2f1eb8c0(0000) GS:ffff882000340000(0000) knlGS:0000000000000000
[1072141.444164] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[1072141.444165] CR2: 00007f3e2f200000 CR3: 0000001ffea4e000 CR4: 00000000001606f0
[1072141.444166] Stack:
[1072141.444166] ffffffa800000246 00000000000009c7 ffffffff8121d583 ffff8818312a05c0
[1072141.444168] ffff8818312a1100 ffff880197c3b280 ffff881861422858 ffffffffffffffea
[1072141.444170] ffffffff81522b1c ffffffff81d0ca20 ffff8817fa17b950 ffff883fdd8121e0
[1072141.444171] Call Trace:
[1072141.444179] [<ffffffff8121d583>] iterate_fd+0x53/0x80
[1072141.444182] [<ffffffff81522b1c>] write_classid+0x4c/0x80
[1072141.444187] [<ffffffff8111328b>] cgroup_file_write+0x9b/0x100
[1072141.444193] [<ffffffff81278bcb>] kernfs_fop_write+0x11b/0x150
[1072141.444198] [<ffffffff81201566>] __vfs_write+0x26/0x100
[1072141.444201] [<ffffffff81201bed>] vfs_write+0x9d/0x190
[1072141.444203] [<ffffffff812028c2>] SyS_write+0x42/0xa0
[1072141.444207] [<ffffffff815f58c3>] entry_SYSCALL_64_fastpath+0x1e/0xca
[1072141.445490] DWARF2 unwinder stuck at entry_SYSCALL_64_fastpath+0x1e/0xca
If a cgroup has many tasks with many open file descriptors then we would
end up in a large loop without any rescheduling point throught the
operation. Add cond_resched once per task.
Signed-off-by: Michal Hocko <[email protected]>
Signed-off-by: Tejun Heo <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/core/netclassid_cgroup.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/net/core/netclassid_cgroup.c b/net/core/netclassid_cgroup.c
index 5e4f04004a49..7bf833598615 100644
--- a/net/core/netclassid_cgroup.c
+++ b/net/core/netclassid_cgroup.c
@@ -106,6 +106,7 @@ static int write_classid(struct cgroup_subsys_state *css, struct cftype *cft,
iterate_fd(p->files, 0, update_classid_sock,
(void *)(unsigned long)cs->classid);
task_unlock(p);
+ cond_resched();
}
css_task_iter_end(&it);
--
2.17.1
From: Sara Sharon <[email protected]>
[ Upstream commit 941ab4eb66c10bc5c7234e83a7a858b2806ed151 ]
There is a bug in FW where the sequence control may be
incorrect, and the driver overrides it with the value
of the ieee80211 header.
However, in BAR there is no sequence control in the header,
which result with arbitrary sequence.
This access to an unknown location is bad and it makes the
logs very confusing - so fix it.
Signed-off-by: Sara Sharon <[email protected]>
Signed-off-by: Luca Coelho <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/intel/iwlwifi/mvm/tx.c | 9 +++++----
1 file changed, 5 insertions(+), 4 deletions(-)
diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/tx.c b/drivers/net/wireless/intel/iwlwifi/mvm/tx.c
index ff193dca2020..2d21f0a1fa00 100644
--- a/drivers/net/wireless/intel/iwlwifi/mvm/tx.c
+++ b/drivers/net/wireless/intel/iwlwifi/mvm/tx.c
@@ -1405,6 +1405,7 @@ static void iwl_mvm_rx_tx_cmd_single(struct iwl_mvm *mvm,
while (!skb_queue_empty(&skbs)) {
struct sk_buff *skb = __skb_dequeue(&skbs);
struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
+ struct ieee80211_hdr *hdr = (void *)skb->data;
bool flushed = false;
skb_freed++;
@@ -1449,11 +1450,11 @@ static void iwl_mvm_rx_tx_cmd_single(struct iwl_mvm *mvm,
info->flags |= IEEE80211_TX_STAT_AMPDU_NO_BACK;
info->flags &= ~IEEE80211_TX_CTL_AMPDU;
- /* W/A FW bug: seq_ctl is wrong when the status isn't success */
- if (status != TX_STATUS_SUCCESS) {
- struct ieee80211_hdr *hdr = (void *)skb->data;
+ /* W/A FW bug: seq_ctl is wrong upon failure / BAR frame */
+ if (ieee80211_is_back_req(hdr->frame_control))
+ seq_ctl = 0;
+ else if (status != TX_STATUS_SUCCESS)
seq_ctl = le16_to_cpu(hdr->seq_ctrl);
- }
if (unlikely(!seq_ctl)) {
struct ieee80211_hdr *hdr = (void *)skb->data;
--
2.17.1
From: Justin Chen <[email protected]>
[ Upstream commit bfba223dcc4548632d8f3bfd15690a86d4c68504 ]
Sometimes we have empty banks within the GPIO block. This commit allows
proper handling of 0 width GPIO banks. We handle 0 width GPIO banks by
incrementing the bank and number of GPIOs, but not initializing them.
This will mean a call into the non-existent GPIOs will return an error.
Also remove "GPIO registered" dev print. This information is misleading
since the incremented banks and gpio_base do not reflect the actual GPIOs
that get initialized. We leave this information out since it is already
printed with dev_dbg.
Signed-off-by: Justin Chen <[email protected]>
Acked-by: Florian Fainelli <[email protected]>
Signed-off-by: Linus Walleij <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpio/gpio-brcmstb.c | 15 ++++++++++++---
1 file changed, 12 insertions(+), 3 deletions(-)
diff --git a/drivers/gpio/gpio-brcmstb.c b/drivers/gpio/gpio-brcmstb.c
index 16c7f9f49416..af936dcca659 100644
--- a/drivers/gpio/gpio-brcmstb.c
+++ b/drivers/gpio/gpio-brcmstb.c
@@ -664,6 +664,18 @@ static int brcmstb_gpio_probe(struct platform_device *pdev)
struct brcmstb_gpio_bank *bank;
struct gpio_chip *gc;
+ /*
+ * If bank_width is 0, then there is an empty bank in the
+ * register block. Special handling for this case.
+ */
+ if (bank_width == 0) {
+ dev_dbg(dev, "Width 0 found: Empty bank @ %d\n",
+ num_banks);
+ num_banks++;
+ gpio_base += MAX_GPIO_PER_BANK;
+ continue;
+ }
+
bank = devm_kzalloc(dev, sizeof(*bank), GFP_KERNEL);
if (!bank) {
err = -ENOMEM;
@@ -740,9 +752,6 @@ static int brcmstb_gpio_probe(struct platform_device *pdev)
goto fail;
}
- dev_info(dev, "Registered %d banks (GPIO(s): %d-%d)\n",
- num_banks, priv->gpio_base, gpio_base - 1);
-
if (priv->parent_wake_irq && need_wakeup_event)
pm_wakeup_event(dev, 0);
--
2.17.1
From: Evan Green <[email protected]>
[ Upstream commit f4bb7704699beee9edfbee875daa9089c86cf724 ]
With commit 10e5e37581fc ("scsi: ufs: Add clock ungating to a separate
workqueue"), clock gating work was moved to a separate work queue with
WQ_MEM_RECLAIM set, since clock gating could occur from a memory reclaim
context. Unfortunately, clk_gating.gate_work was left queued via
schedule_delayed_work, which is a system workqueue that does not have
WQ_MEM_RECLAIM set. Because ufshcd_ungate_work attempts to cancel
gate_work, the following warning appears:
[ 14.174170] workqueue: WQ_MEM_RECLAIM ufs_clk_gating_0:ufshcd_ungate_work is flushing !WQ_MEM_RECLAIM events:ufshcd_gate_work
[ 14.174179] WARNING: CPU: 4 PID: 173 at kernel/workqueue.c:2440 check_flush_dependency+0x110/0x118
[ 14.205725] CPU: 4 PID: 173 Comm: kworker/u16:3 Not tainted 4.14.68 #1
[ 14.212437] Hardware name: Google Cheza (rev1) (DT)
[ 14.217459] Workqueue: ufs_clk_gating_0 ufshcd_ungate_work
[ 14.223107] task: ffffffc0f6a40080 task.stack: ffffff800a490000
[ 14.229195] PC is at check_flush_dependency+0x110/0x118
[ 14.234569] LR is at check_flush_dependency+0x110/0x118
[ 14.239944] pc : [<ffffff80080cad14>] lr : [<ffffff80080cad14>] pstate: 60c001c9
[ 14.333050] Call trace:
[ 14.427767] [<ffffff80080cad14>] check_flush_dependency+0x110/0x118
[ 14.434219] [<ffffff80080cafec>] start_flush_work+0xac/0x1fc
[ 14.440046] [<ffffff80080caeec>] flush_work+0x40/0x94
[ 14.445246] [<ffffff80080cb288>] __cancel_work_timer+0x11c/0x1b8
[ 14.451433] [<ffffff80080cb4b8>] cancel_delayed_work_sync+0x20/0x30
[ 14.457886] [<ffffff80085b9294>] ufshcd_ungate_work+0x24/0xd0
[ 14.463800] [<ffffff80080cfb04>] process_one_work+0x32c/0x690
[ 14.469713] [<ffffff80080d0154>] worker_thread+0x218/0x338
[ 14.475361] [<ffffff80080d527c>] kthread+0x120/0x130
[ 14.480470] [<ffffff8008084814>] ret_from_fork+0x10/0x18
The simple solution is to put the gate_work on the same WQ_MEM_RECLAIM
work queue as the ungate_work.
Fixes: 10e5e37581fc ("scsi: ufs: Add clock ungating to a separate workqueue")
Signed-off-by: Evan Green <[email protected]>
Reviewed-by: Douglas Anderson <[email protected]>
Reviewed-by: Stephen Boyd <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/scsi/ufs/ufshcd.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
index c55f38ec391c..54074dd483a7 100644
--- a/drivers/scsi/ufs/ufshcd.c
+++ b/drivers/scsi/ufs/ufshcd.c
@@ -1691,8 +1691,9 @@ static void __ufshcd_release(struct ufs_hba *hba)
hba->clk_gating.state = REQ_CLKS_OFF;
trace_ufshcd_clk_gating(dev_name(hba->dev), hba->clk_gating.state);
- schedule_delayed_work(&hba->clk_gating.gate_work,
- msecs_to_jiffies(hba->clk_gating.delay_ms));
+ queue_delayed_work(hba->clk_gating.clk_gating_workq,
+ &hba->clk_gating.gate_work,
+ msecs_to_jiffies(hba->clk_gating.delay_ms));
}
void ufshcd_release(struct ufs_hba *hba)
--
2.17.1
From: Maya Erez <[email protected]>
[ Upstream commit 84f16fbb62384fb209cd35741d94eb00b5ca2746 ]
RX SKBs are released in both wil6210 rmmod and RX handle.
As there is no lock to protect the buffers DMA unmap,
the SKB pointer in buff_arr is used to check if the buffer
memory was already released.
Setting wil->rx_buff_mgmt.buff_arr[buff_id].skb to NULL before the DMA
memory unmap will prevent duplicate unmapping of the same memory.
Move the buffer ID to the free list also in case the SKB is NULL.
Signed-off-by: Maya Erez <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/ath/wil6210/txrx_edma.c | 15 ++++++++++-----
1 file changed, 10 insertions(+), 5 deletions(-)
diff --git a/drivers/net/wireless/ath/wil6210/txrx_edma.c b/drivers/net/wireless/ath/wil6210/txrx_edma.c
index bca61cb44c37..3e7fc2983cbb 100644
--- a/drivers/net/wireless/ath/wil6210/txrx_edma.c
+++ b/drivers/net/wireless/ath/wil6210/txrx_edma.c
@@ -279,9 +279,6 @@ static void wil_move_all_rx_buff_to_free_list(struct wil6210_priv *wil,
u16 buff_id;
*d = *_d;
- pa = wil_rx_desc_get_addr_edma(&d->dma);
- dmalen = le16_to_cpu(d->dma.length);
- dma_unmap_single(dev, pa, dmalen, DMA_FROM_DEVICE);
/* Extract the SKB from the rx_buff management array */
buff_id = __le16_to_cpu(d->mac.buff_id);
@@ -291,10 +288,15 @@ static void wil_move_all_rx_buff_to_free_list(struct wil6210_priv *wil,
}
skb = wil->rx_buff_mgmt.buff_arr[buff_id].skb;
wil->rx_buff_mgmt.buff_arr[buff_id].skb = NULL;
- if (unlikely(!skb))
+ if (unlikely(!skb)) {
wil_err(wil, "No Rx skb at buff_id %d\n", buff_id);
- else
+ } else {
+ pa = wil_rx_desc_get_addr_edma(&d->dma);
+ dmalen = le16_to_cpu(d->dma.length);
+ dma_unmap_single(dev, pa, dmalen, DMA_FROM_DEVICE);
+
kfree_skb(skb);
+ }
/* Move the buffer from the active to the free list */
list_move(&wil->rx_buff_mgmt.buff_arr[buff_id].list,
@@ -906,6 +908,9 @@ static struct sk_buff *wil_sring_reap_rx_edma(struct wil6210_priv *wil,
wil->rx_buff_mgmt.buff_arr[buff_id].skb = NULL;
if (!skb) {
wil_err(wil, "No Rx skb at buff_id %d\n", buff_id);
+ /* Move the buffer from the active list to the free list */
+ list_move(&wil->rx_buff_mgmt.buff_arr[buff_id].list,
+ &wil->rx_buff_mgmt.free);
goto again;
}
--
2.17.1
From: Jack Wang <[email protected]>
[ Upstream commit 6aaa58c994277647f8b05ffef3b9b225a2d08f36 ]
I noticed kmemleak report memory leak when run create/stop
md in a loop, backtrace:
[<000000001ca975e7>] mempool_create_node+0x86/0xd0
[<0000000095576bcd>] md_run+0x1057/0x1410 [md_mod]
[<000000007b45c5fc>] do_md_run+0x15/0x130 [md_mod]
[<000000001ede9ec0>] md_ioctl+0x1f49/0x25d0 [md_mod]
[<000000004142cacf>] blkdev_ioctl+0x680/0xd00
The root cause is we alloc mddev->flush_pool and
mddev->flush_bio_pool in md_run, but from do_md_stop
will not call into md_stop but __md_stop, move the
mempool_destroy to __md_stop fixes the problem for me.
The bug was introduced in 5a409b4f56d5, the fixes should go to
4.18+
Fixes: 5a409b4f56d5 ("MD: fix lock contention for flush bios")
Signed-off-by: Jack Wang <[email protected]>
Reviewed-by: Xiao Ni <[email protected]>
Signed-off-by: Shaohua Li <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/md/md.c | 16 ++++++++--------
1 file changed, 8 insertions(+), 8 deletions(-)
diff --git a/drivers/md/md.c b/drivers/md/md.c
index 06f68f19b5f3..8668793262d0 100644
--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -5906,14 +5906,6 @@ static void __md_stop(struct mddev *mddev)
mddev->to_remove = &md_redundancy_group;
module_put(pers->owner);
clear_bit(MD_RECOVERY_FROZEN, &mddev->recovery);
-}
-
-void md_stop(struct mddev *mddev)
-{
- /* stop the array and free an attached data structures.
- * This is called from dm-raid
- */
- __md_stop(mddev);
if (mddev->flush_bio_pool) {
mempool_destroy(mddev->flush_bio_pool);
mddev->flush_bio_pool = NULL;
@@ -5922,6 +5914,14 @@ void md_stop(struct mddev *mddev)
mempool_destroy(mddev->flush_pool);
mddev->flush_pool = NULL;
}
+}
+
+void md_stop(struct mddev *mddev)
+{
+ /* stop the array and free an attached data structures.
+ * This is called from dm-raid
+ */
+ __md_stop(mddev);
bioset_exit(&mddev->bio_set);
bioset_exit(&mddev->sync_set);
}
--
2.17.1
From: Dan Carpenter <[email protected]>
[ Upstream commit 3348ef6a6a126706d6a73ed40c18d8033df72783 ]
If recvlength is less than MESSAGE_HEADER_LEN (4) we would end up
corrupting memory.
Fixes: c305a19a0d0a ("libertas_tf: usb specific functions")
Signed-off-by: Dan Carpenter <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/marvell/libertas_tf/if_usb.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/drivers/net/wireless/marvell/libertas_tf/if_usb.c b/drivers/net/wireless/marvell/libertas_tf/if_usb.c
index e92fc5001171..789337ea676a 100644
--- a/drivers/net/wireless/marvell/libertas_tf/if_usb.c
+++ b/drivers/net/wireless/marvell/libertas_tf/if_usb.c
@@ -605,9 +605,10 @@ static inline void process_cmdrequest(int recvlength, uint8_t *recvbuff,
{
unsigned long flags;
- if (recvlength > LBS_CMD_BUFFER_SIZE) {
+ if (recvlength < MESSAGE_HEADER_LEN ||
+ recvlength > LBS_CMD_BUFFER_SIZE) {
lbtf_deb_usbd(&cardp->udev->dev,
- "The receive buffer is too large\n");
+ "The receive buffer is invalid: %d\n", recvlength);
kfree_skb(skb);
return;
}
--
2.17.1
From: Lorenzo Bianconi <[email protected]>
[ Upstream commit 9b2fd48d36e25b9be9ddb8be8cc1eb263a1d1843 ]
Cleanup {tx,rx} and mcu queues if resume operation fails
Fixes: ee676cd5017c ("mt76: add driver code for MT76x2u based devices")
Signed-off-by: Lorenzo Bianconi <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/mediatek/mt76/mt76x2_usb.c | 14 +++++++++++---
1 file changed, 11 insertions(+), 3 deletions(-)
diff --git a/drivers/net/wireless/mediatek/mt76/mt76x2_usb.c b/drivers/net/wireless/mediatek/mt76/mt76x2_usb.c
index 1428cfdee579..9594433234cc 100644
--- a/drivers/net/wireless/mediatek/mt76/mt76x2_usb.c
+++ b/drivers/net/wireless/mediatek/mt76/mt76x2_usb.c
@@ -107,16 +107,24 @@ static int __maybe_unused mt76x2u_resume(struct usb_interface *intf)
mt76u_mcu_complete_urb,
&usb->mcu.cmpl);
if (err < 0)
- return err;
+ goto err;
err = mt76u_submit_rx_buffers(&dev->mt76);
if (err < 0)
- return err;
+ goto err;
tasklet_enable(&usb->rx_tasklet);
tasklet_enable(&usb->tx_tasklet);
- return mt76x2u_init_hardware(dev);
+ err = mt76x2u_init_hardware(dev);
+ if (err < 0)
+ goto err;
+
+ return 0;
+
+err:
+ mt76x2u_cleanup(dev);
+ return err;
}
MODULE_DEVICE_TABLE(usb, mt76x2u_device_table);
--
2.17.1
From: Ronnie Sahlberg <[email protected]>
[ Upstream commit cb5c2e63948451d38c977685fffc06e23beb4517 ]
When processing the mids for compounds we would only add credits based on
the last successful mid in the compound which would leak credits and
eventually triggering a re-connect.
Fix this by splitting the mid processing part into two loops instead of one
where the first loop just waits for all mids and then counts how many
credits we were granted for the whole compound.
Signed-off-by: Ronnie Sahlberg <[email protected]>
Signed-off-by: Steve French <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/cifs/transport.c | 57 +++++++++++++++++++++++++++++----------------
1 file changed, 37 insertions(+), 20 deletions(-)
diff --git a/fs/cifs/transport.c b/fs/cifs/transport.c
index b48f43963da6..333729cf46cd 100644
--- a/fs/cifs/transport.c
+++ b/fs/cifs/transport.c
@@ -786,7 +786,7 @@ compound_send_recv(const unsigned int xid, struct cifs_ses *ses,
int i, j, rc = 0;
int timeout, optype;
struct mid_q_entry *midQ[MAX_COMPOUND];
- unsigned int credits = 1;
+ unsigned int credits = 0;
char *buf;
timeout = flags & CIFS_TIMEOUT_MASK;
@@ -851,17 +851,20 @@ compound_send_recv(const unsigned int xid, struct cifs_ses *ses,
mutex_unlock(&ses->server->srv_mutex);
- for (i = 0; i < num_rqst; i++) {
- if (rc < 0)
- goto out;
+ if (rc < 0)
+ goto out;
- if ((ses->status == CifsNew) || (optype & CIFS_NEG_OP))
- smb311_update_preauth_hash(ses, rqst[i].rq_iov,
- rqst[i].rq_nvec);
+ /*
+ * Compounding is never used during session establish.
+ */
+ if ((ses->status == CifsNew) || (optype & CIFS_NEG_OP))
+ smb311_update_preauth_hash(ses, rqst[0].rq_iov,
+ rqst[0].rq_nvec);
- if (timeout == CIFS_ASYNC_OP)
- goto out;
+ if (timeout == CIFS_ASYNC_OP)
+ goto out;
+ for (i = 0; i < num_rqst; i++) {
rc = wait_for_response(ses->server, midQ[i]);
if (rc != 0) {
cifs_dbg(FYI, "Cancelling wait for mid %llu\n",
@@ -877,10 +880,21 @@ compound_send_recv(const unsigned int xid, struct cifs_ses *ses,
}
spin_unlock(&GlobalMid_Lock);
}
+ }
+
+ for (i = 0; i < num_rqst; i++)
+ if (midQ[i]->resp_buf)
+ credits += ses->server->ops->get_credits(midQ[i]);
+ if (!credits)
+ credits = 1;
+
+ for (i = 0; i < num_rqst; i++) {
+ if (rc < 0)
+ goto out;
rc = cifs_sync_mid_result(midQ[i], ses->server);
if (rc != 0) {
- add_credits(ses->server, 1, optype);
+ add_credits(ses->server, credits, optype);
return rc;
}
@@ -901,23 +915,26 @@ compound_send_recv(const unsigned int xid, struct cifs_ses *ses,
else
resp_buf_type[i] = CIFS_SMALL_BUFFER;
- if ((ses->status == CifsNew) || (optype & CIFS_NEG_OP)) {
- struct kvec iov = {
- .iov_base = resp_iov[i].iov_base,
- .iov_len = resp_iov[i].iov_len
- };
- smb311_update_preauth_hash(ses, &iov, 1);
- }
-
- credits = ses->server->ops->get_credits(midQ[i]);
-
rc = ses->server->ops->check_receive(midQ[i], ses->server,
flags & CIFS_LOG_ERROR);
/* mark it so buf will not be freed by cifs_delete_mid */
if ((flags & CIFS_NO_RESP) == 0)
midQ[i]->resp_buf = NULL;
+
}
+
+ /*
+ * Compounding is never used during session establish.
+ */
+ if ((ses->status == CifsNew) || (optype & CIFS_NEG_OP)) {
+ struct kvec iov = {
+ .iov_base = resp_iov[0].iov_base,
+ .iov_len = resp_iov[0].iov_len
+ };
+ smb311_update_preauth_hash(ses, &iov, 1);
+ }
+
out:
/*
* This will dequeue all mids. After this it is important that the
--
2.17.1
From: Yunsheng Lin <[email protected]>
[ Upstream commit 41dafea2af781d8e3ab8626d236b52e4172905a3 ]
There are only 128 entries in vf vlan table, if user has added
more than 128 vlan, fw will ignore it and disable the vf vlan
table. So when user deletes the vlan entry that has not been
set to vf vlan table, fw will return not found result and driver
treat that as error, which will cause vlan delete failed problem.
This patch fixes it by returning ok when fw returns not found
result.
Fixes: 6c251711b37f ("net: hns3: Disable vf vlan filter when vf vlan table is full")
Signed-off-by: Yunsheng Lin <[email protected]>
Signed-off-by: Peng Li <[email protected]>
Signed-off-by: Salil Mehta <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
index 2d58726893f4..db763450e5e3 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
@@ -4693,9 +4693,17 @@ static int hclge_set_vf_vlan_common(struct hclge_dev *hdev, int vfid,
"Add vf vlan filter fail, ret =%d.\n",
req0->resp_code);
} else {
+#define HCLGE_VF_VLAN_DEL_NO_FOUND 1
if (!req0->resp_code)
return 0;
+ if (req0->resp_code == HCLGE_VF_VLAN_DEL_NO_FOUND) {
+ dev_warn(&hdev->pdev->dev,
+ "vlan %d filter is not in vf vlan table\n",
+ vlan);
+ return 0;
+ }
+
dev_err(&hdev->pdev->dev,
"Kill vf vlan filter fail, ret =%d.\n",
req0->resp_code);
--
2.17.1
From: Yunsheng Lin <[email protected]>
[ Upstream commit daaa8521760ee4d4e65f309c4c37b3a1e58c9d4e ]
When netdev is down, the stack will delete the vlan from
hardware including vlan0, which will cause problem when
doing loopback selftest when netdev is down.
This patch fixes it by always preserving vlan 0 in hardware,
because vlan 0 is defalut vlan, which should always be in
hardware.
Fixes: c39c4d98dc65 ("net: hns3: Add mac loopback selftest support in hns3 driver")
Signed-off-by: Yunsheng Lin <[email protected]>
Signed-off-by: Peng Li <[email protected]>
Signed-off-by: Salil Mehta <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
index dd1e390ed68e..2d58726893f4 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
@@ -4739,6 +4739,9 @@ static int hclge_set_vlan_filter_hw(struct hclge_dev *hdev, __be16 proto,
u16 vport_idx, vport_num = 0;
int ret;
+ if (is_kill && !vlan_id)
+ return 0;
+
ret = hclge_set_vf_vlan_common(hdev, vport_id, is_kill, vlan_id,
0, proto);
if (ret) {
--
2.17.1
From: Yunsheng Lin <[email protected]>
[ Upstream commit 3f8601f0f5716c4e63a9f215bbc581df42859d61 ]
When ping is runnig and user executes the loopback selftest, the
ping cmd will stop and exit.
This patch fixes it by using the hns3_nic_net_open/stop to offline
the netdev when doing loopback selftest.
Fixes: c39c4d98dc65 ("net: hns3: Add mac loopback selftest support in hns3 driver")
Signed-off-by: Yunsheng Lin <[email protected]>
Signed-off-by: Peng Li <[email protected]>
Signed-off-by: Salil Mehta <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c b/drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c
index f70ee6910ee2..9684ad015c42 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c
@@ -309,7 +309,7 @@ static void hns3_self_test(struct net_device *ndev,
h->flags & HNAE3_SUPPORT_SERDES_LOOPBACK;
if (if_running)
- dev_close(ndev);
+ ndev->netdev_ops->ndo_stop(ndev);
#if IS_ENABLED(CONFIG_VLAN_8021Q)
/* Disable the vlan filter for selftest does not support it */
@@ -347,7 +347,7 @@ static void hns3_self_test(struct net_device *ndev,
#endif
if (if_running)
- dev_open(ndev);
+ ndev->netdev_ops->ndo_open(ndev);
}
static int hns3_get_sset_count(struct net_device *netdev, int stringset)
--
2.17.1
From: Geert Uytterhoeven <[email protected]>
[ Upstream commit 760eea43f8c6d48684f1f34b8a02fddc1456e849 ]
The workqueue used for monitoring the hardware may run while the device
is already suspended. Fix this by using the freezable system workqueue
instead, cfr. commit 51e20d0e3a60cf46 ("thermal: Prevent polling from
happening during system suspend").
Fixes: 608567aac3206ae8 ("thermal: da9062/61: Thermal junction temperature monitoring driver")
Signed-off-by: Geert Uytterhoeven <[email protected]>
Acked-by: Steve Twiss <[email protected]>
Signed-off-by: Eduardo Valentin <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/thermal/da9062-thermal.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/thermal/da9062-thermal.c b/drivers/thermal/da9062-thermal.c
index dd8dd947b7f0..01b0cb994457 100644
--- a/drivers/thermal/da9062-thermal.c
+++ b/drivers/thermal/da9062-thermal.c
@@ -106,7 +106,7 @@ static void da9062_thermal_poll_on(struct work_struct *work)
THERMAL_EVENT_UNSPECIFIED);
delay = msecs_to_jiffies(thermal->zone->passive_delay);
- schedule_delayed_work(&thermal->work, delay);
+ queue_delayed_work(system_freezable_wq, &thermal->work, delay);
return;
}
@@ -125,7 +125,7 @@ static irqreturn_t da9062_thermal_irq_handler(int irq, void *data)
struct da9062_thermal *thermal = data;
disable_irq_nosync(thermal->irq);
- schedule_delayed_work(&thermal->work, 0);
+ queue_delayed_work(system_freezable_wq, &thermal->work, 0);
return IRQ_HANDLED;
}
--
2.17.1
From: Arnaldo Carvalho de Melo <[email protected]>
[ Upstream commit 1632936480a53d85ef3012cd9f290e247251cbb9 ]
When we don't have the iputils-debuginfo package installed, i.e. when we
don't have the DWARF information needed to resolve ping's samples, we
end up failing this 'perf test' entry:
# perf test ping
62: probe libc's inet_pton & backtrace it with ping : Ok
# rpm -e iputils-debuginfo
# perf test ping
62: probe libc's inet_pton & backtrace it with ping : FAILED!
#
Fix it to accept "[unknown]" where the symbol + offset, when resolved,
is expected.
I think this will fail in the other arches as well, but since I can't
test now, I'm leaving s390x and ppc cases as-is.
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Hendrik Brueckner <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kim Phillips <[email protected]>
Cc: Michael Petlan <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Naveen N. Rao <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Ravi Bangoria <[email protected]>
Cc: Sandipan Das <[email protected]>
Cc: Sukadev Bhattiprolu <[email protected]>
Cc: Thomas Richter <[email protected]>
Cc: Wang Nan <[email protected]>
Fixes: 7903a7086723 ("perf script: Show symbol offsets by default")
Link: https://lkml.kernel.org/n/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
tools/perf/tests/shell/record+probe_libc_inet_pton.sh | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/tools/perf/tests/shell/record+probe_libc_inet_pton.sh b/tools/perf/tests/shell/record+probe_libc_inet_pton.sh
index 3013ac8f83d0..cab7b0aea6ea 100755
--- a/tools/perf/tests/shell/record+probe_libc_inet_pton.sh
+++ b/tools/perf/tests/shell/record+probe_libc_inet_pton.sh
@@ -48,7 +48,7 @@ trace_libc_inet_pton_backtrace() {
*)
eventattr='max-stack=3'
echo "getaddrinfo\+0x[[:xdigit:]]+[[:space:]]\($libc\)$" >> $expected
- echo ".*\+0x[[:xdigit:]]+[[:space:]]\(.*/bin/ping.*\)$" >> $expected
+ echo ".*(\+0x[[:xdigit:]]+|\[unknown\])[[:space:]]\(.*/bin/ping.*\)$" >> $expected
;;
esac
--
2.17.1
From: YueHaibing <[email protected]>
[ Upstream commit 9e7e6cabf371cc008cb2244a04c012b516753693 ]
Fixes gcc '-Wunused-but-set-variable' warning:
drivers/net/net_failover.c: In function 'net_failover_slave_unregister':
drivers/net/net_failover.c:598:35: warning:
variable 'primary_dev' set but not used [-Wunused-but-set-variable]
There should check the validity of 'slave_dev'.
Fixes: cfc80d9a1163 ("net: Introduce net_failover driver")
Signed-off-by: YueHaibing <[email protected]>
Acked-by: Sridhar Samudrala <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/net_failover.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/net/net_failover.c b/drivers/net/net_failover.c
index 7ae1856d1f18..5a749dc25bec 100644
--- a/drivers/net/net_failover.c
+++ b/drivers/net/net_failover.c
@@ -603,6 +603,9 @@ static int net_failover_slave_unregister(struct net_device *slave_dev,
primary_dev = rtnl_dereference(nfo_info->primary_dev);
standby_dev = rtnl_dereference(nfo_info->standby_dev);
+ if (WARN_ON_ONCE(slave_dev != primary_dev && slave_dev != standby_dev))
+ return -ENODEV;
+
vlan_vids_del_by_dev(slave_dev, failover_dev);
dev_uc_unsync(slave_dev, failover_dev);
dev_mc_unsync(slave_dev, failover_dev);
--
2.17.1
From: Diego Viola <[email protected]>
[ Upstream commit a435ab4f80f983c53b4ca4f8c12b3ddd3ca17670 ]
med_power_with_dipm causes my T450 to freeze with a SAMSUNG
MZ7TD256HAFV-000L9 SSD (firmware DXT02L5Q).
Switching the LPM to max_performance fixes this issue.
Acked-by: Hans de Goede <[email protected]>
Signed-off-by: Diego Viola <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/ata/libata-core.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index a9dd4ea7467d..6e594644cb1d 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -4553,6 +4553,7 @@ static const struct ata_blacklist_entry ata_device_blacklist [] = {
/* These specific Samsung models/firmware-revs do not handle LPM well */
{ "SAMSUNG MZMPC128HBFU-000MV", "CXM14M1Q", ATA_HORKAGE_NOLPM, },
{ "SAMSUNG SSD PM830 mSATA *", "CXM13D1Q", ATA_HORKAGE_NOLPM, },
+ { "SAMSUNG MZ7TD256HAFV-000L9", "DXT02L5Q", ATA_HORKAGE_NOLPM, },
/* devices that don't properly handle queued TRIM commands */
{ "Micron_M500IT_*", "MU01", ATA_HORKAGE_NO_NCQ_TRIM |
--
2.17.1
From: Douglas Anderson <[email protected]>
[ Upstream commit 0d5b476f8f57fcb06c45fe27681ac47254f63fd2 ]
If you look at "pinconf-groups" in debugfs for ssbi-mpp you'll notice
it looks like nonsense.
The problem is fairly well described in commit 1cf86bc21257 ("pinctrl:
qcom: spmi-gpio: Fix pmic_gpio_config_get() to be compliant") and
commit 05e0c828955c ("pinctrl: msm: Fix msm_config_group_get() to be
compliant"), but it was pointed out that ssbi-mpp has the same
problem. Let's fix it there too.
NOTE: in case it's helpful to someone reading this, the way to tell
whether to do the -EINVAL or not is to look at the PCONFDUMP for a
given attribute. If the last element (has_arg) is false then you need
to do the -EINVAL trick.
ALSO NOTE: it seems unlikely that the values returned when we try to
get PIN_CONFIG_BIAS_PULL_UP will actually be printed since "has_arg"
is false for that one, but I guess it's still fine to return different
values so I kept doing that. It seems like another driver (ssbi-gpio)
uses a custom attribute (PM8XXX_QCOM_PULL_UP_STRENGTH) for something
similar so maybe a future change should do that here too.
Fixes: cfb24f6ebd38 ("pinctrl: Qualcomm SPMI PMIC MPP pin controller driver")
Signed-off-by: Douglas Anderson <[email protected]>
Reviewed-by: Stephen Boyd <[email protected]>
Reviewed-by: Bjorn Andersson <[email protected]>
Signed-off-by: Linus Walleij <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/pinctrl/qcom/pinctrl-spmi-mpp.c | 19 ++++++++++++-------
1 file changed, 12 insertions(+), 7 deletions(-)
diff --git a/drivers/pinctrl/qcom/pinctrl-spmi-mpp.c b/drivers/pinctrl/qcom/pinctrl-spmi-mpp.c
index 7577f133d326..ac251c62bc66 100644
--- a/drivers/pinctrl/qcom/pinctrl-spmi-mpp.c
+++ b/drivers/pinctrl/qcom/pinctrl-spmi-mpp.c
@@ -345,13 +345,12 @@ static int pmic_mpp_config_get(struct pinctrl_dev *pctldev,
switch (param) {
case PIN_CONFIG_BIAS_DISABLE:
- arg = pad->pullup == PMIC_MPP_PULL_UP_OPEN;
+ if (pad->pullup != PMIC_MPP_PULL_UP_OPEN)
+ return -EINVAL;
+ arg = 1;
break;
case PIN_CONFIG_BIAS_PULL_UP:
switch (pad->pullup) {
- case PMIC_MPP_PULL_UP_OPEN:
- arg = 0;
- break;
case PMIC_MPP_PULL_UP_0P6KOHM:
arg = 600;
break;
@@ -366,13 +365,17 @@ static int pmic_mpp_config_get(struct pinctrl_dev *pctldev,
}
break;
case PIN_CONFIG_BIAS_HIGH_IMPEDANCE:
- arg = !pad->is_enabled;
+ if (pad->is_enabled)
+ return -EINVAL;
+ arg = 1;
break;
case PIN_CONFIG_POWER_SOURCE:
arg = pad->power_source;
break;
case PIN_CONFIG_INPUT_ENABLE:
- arg = pad->input_enabled;
+ if (!pad->input_enabled)
+ return -EINVAL;
+ arg = 1;
break;
case PIN_CONFIG_OUTPUT:
arg = pad->out_value;
@@ -384,7 +387,9 @@ static int pmic_mpp_config_get(struct pinctrl_dev *pctldev,
arg = pad->amux_input;
break;
case PMIC_MPP_CONF_PAIRED:
- arg = pad->paired;
+ if (!pad->paired)
+ return -EINVAL;
+ arg = 1;
break;
case PIN_CONFIG_DRIVE_STRENGTH:
arg = pad->drive_strength;
--
2.17.1
From: Shannon Nelson <[email protected]>
[ Upstream commit 47b6f50077e68bcd544f657526dad4bfdce7e87d ]
There seems to be a problem in the x540's internal switch wherein if SR-IOV
mode is enabled and an offloaded IPsec packet is sent to a local VF,
the packet is silently dropped. This might never be a problem as it is
somewhat a corner case, but if someone happens to be using IPsec offload
from the PF to a VF that just happens to get migrated to the local box,
communication will mysteriously fail.
Not good.
A simple way to protect from this is to simply not allow any IPsec offloads
for outgoing packets when num_vfs != 0. This doesn't help any offloads that
were created before SR-IOV was enabled, but we'll get to that later.
Signed-off-by: Shannon Nelson <[email protected]>
Tested-by: Andrew Bowers <[email protected]>
Signed-off-by: Jeff Kirsher <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/intel/ixgbe/ixgbe_ipsec.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_ipsec.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_ipsec.c
index da4322e4daed..add124e0381d 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_ipsec.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_ipsec.c
@@ -676,6 +676,9 @@ static int ixgbe_ipsec_add_sa(struct xfrm_state *xs)
} else {
struct tx_sa tsa;
+ if (adapter->num_vfs)
+ return -EOPNOTSUPP;
+
/* find the first unused index */
ret = ixgbe_ipsec_find_empty_idx(ipsec, false);
if (ret < 0) {
--
2.17.1
From: Douglas Anderson <[email protected]>
[ Upstream commit b432414b996d32a1bd9afe2bd595bd5729c1477f ]
If you look at "pinconf-groups" in debugfs for ssbi-gpio you'll notice
it looks like nonsense.
The problem is fairly well described in commit 1cf86bc21257 ("pinctrl:
qcom: spmi-gpio: Fix pmic_gpio_config_get() to be compliant") and
commit 05e0c828955c ("pinctrl: msm: Fix msm_config_group_get() to be
compliant"), but it was pointed out that ssbi-gpio has the same
problem. Let's fix it there too.
Fixes: b4c45fe974bc ("pinctrl: qcom: ssbi: Family A gpio & mpp drivers")
Signed-off-by: Douglas Anderson <[email protected]>
Reviewed-by: Stephen Boyd <[email protected]>
Reviewed-by: Bjorn Andersson <[email protected]>
Signed-off-by: Linus Walleij <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/pinctrl/qcom/pinctrl-ssbi-gpio.c | 28 ++++++++++++++++++------
1 file changed, 21 insertions(+), 7 deletions(-)
diff --git a/drivers/pinctrl/qcom/pinctrl-ssbi-gpio.c b/drivers/pinctrl/qcom/pinctrl-ssbi-gpio.c
index f53e32a9d8fc..0e153bae322e 100644
--- a/drivers/pinctrl/qcom/pinctrl-ssbi-gpio.c
+++ b/drivers/pinctrl/qcom/pinctrl-ssbi-gpio.c
@@ -260,22 +260,32 @@ static int pm8xxx_pin_config_get(struct pinctrl_dev *pctldev,
switch (param) {
case PIN_CONFIG_BIAS_DISABLE:
- arg = pin->bias == PM8XXX_GPIO_BIAS_NP;
+ if (pin->bias != PM8XXX_GPIO_BIAS_NP)
+ return -EINVAL;
+ arg = 1;
break;
case PIN_CONFIG_BIAS_PULL_DOWN:
- arg = pin->bias == PM8XXX_GPIO_BIAS_PD;
+ if (pin->bias != PM8XXX_GPIO_BIAS_PD)
+ return -EINVAL;
+ arg = 1;
break;
case PIN_CONFIG_BIAS_PULL_UP:
- arg = pin->bias <= PM8XXX_GPIO_BIAS_PU_1P5_30;
+ if (pin->bias > PM8XXX_GPIO_BIAS_PU_1P5_30)
+ return -EINVAL;
+ arg = 1;
break;
case PM8XXX_QCOM_PULL_UP_STRENGTH:
arg = pin->pull_up_strength;
break;
case PIN_CONFIG_BIAS_HIGH_IMPEDANCE:
- arg = pin->disable;
+ if (!pin->disable)
+ return -EINVAL;
+ arg = 1;
break;
case PIN_CONFIG_INPUT_ENABLE:
- arg = pin->mode == PM8XXX_GPIO_MODE_INPUT;
+ if (pin->mode != PM8XXX_GPIO_MODE_INPUT)
+ return -EINVAL;
+ arg = 1;
break;
case PIN_CONFIG_OUTPUT:
if (pin->mode & PM8XXX_GPIO_MODE_OUTPUT)
@@ -290,10 +300,14 @@ static int pm8xxx_pin_config_get(struct pinctrl_dev *pctldev,
arg = pin->output_strength;
break;
case PIN_CONFIG_DRIVE_PUSH_PULL:
- arg = !pin->open_drain;
+ if (pin->open_drain)
+ return -EINVAL;
+ arg = 1;
break;
case PIN_CONFIG_DRIVE_OPEN_DRAIN:
- arg = pin->open_drain;
+ if (!pin->open_drain)
+ return -EINVAL;
+ arg = 1;
break;
default:
return -EINVAL;
--
2.17.1
From: Sebastian Basierski <[email protected]>
[ Upstream commit 7fb94bd58dd6650a0158e68d414e185077d8b57a ]
While VF2VF with RSS communication, RSS Type were wrongly recognized
and RSS hash was not calculated as it should be. Packets was
distributed on various queues by accident.
This commit fixes that behaviour and causes proper RSS Type recognition.
Signed-off-by: Sebastian Basierski <[email protected]>
Tested-by: Andrew Bowers <[email protected]>
Signed-off-by: Jeff Kirsher <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c b/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c
index 5a228582423b..4093a9c52c18 100644
--- a/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c
+++ b/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c
@@ -3849,6 +3849,10 @@ static void ixgbevf_tx_csum(struct ixgbevf_ring *tx_ring,
skb_checksum_help(skb);
goto no_csum;
}
+
+ if (first->protocol == htons(ETH_P_IP))
+ type_tucmd |= IXGBE_ADVTXD_TUCMD_IPV4;
+
/* update TX checksum flag */
first->tx_flags |= IXGBE_TX_FLAGS_CSUM;
vlan_macip_lens = skb_checksum_start_offset(skb) -
--
2.17.1
From: Siva Rebbagondla <[email protected]>
[ Upstream commit baa8caf4ab7af2d9e84b566b99fe919a4e9e7562 ]
During testing in ARM32 platforms, observed below kernel panic, as driver
accessing data beyond the allocated memory while submitting URB to USB.
Fix: Resolved this by specifying correct length by considering 64 bit
alignment. so that, USB bus driver will access only allocated memory.
Unit-test: Tested and confirm that driver bring up and scanning,
connection and data transfer works fine with this fix.
...skipping...
[ 25.389450] Unable to handle kernel paging request at virtual
address 5aa11422
[ 25.403078] Internal error: Oops: 5 [#1] SMP ARM
[ 25.407703] Modules linked in: rsi_usb
[ 25.411473] CPU: 1 PID: 317 Comm: RX-Thread Not tainted 4.18.0-rc7 #1
[ 25.419221] Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree)
[ 25.425764] PC is at skb_release_data+0x90/0x168
[ 25.430393] LR is at skb_release_all+0x28/0x2c
[ 25.434842] pc : [<807435b0>] lr : [<80742ba0>] psr: 200e0013 5aa1141e
[ 25.464633] Flags: nzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none
[ 25.477524] Process RX-Thread (pid: 317, stack limit = 0x(ptrval))
[ 25.483709] Stack: (0xedf69ed8 to 0xedf6a000)
[ 25.569907] Backtrace:
[ 25.572368] [<80743520>] (skb_release_data) from [<80742ba0>]
(skb_release_all+0x28/0x2c)
[ 25.580555] r9:7f00258c r8:00000001 r7:ee355000 r6:eddab0d0
r5:eddab000 r4:eddbb840
[ 25.588308] [<80742b78>] (skb_release_all) from [<807432cc>]
(consume_skb+0x30/0x50)
[ 25.596055] r5:eddab000 r4:eddbb840
[ 25.599648] [<8074329c>] (consume_skb) from [<7f00117c>]
(rsi_usb_rx_thread+0x64/0x12c [rsi_usb])
[ 25.608524] r5:eddab000 r4:eddbb840
[ 25.612116] [<7f001118>] (rsi_usb_rx_thread [rsi_usb]) from
[<80142750>] (kthread+0x11c/0x15c)
[ 25.620735] r10:ee9ff9e0 r9:edcde3b8 r8:ee355000 r7:edf68000
r6:edd3a780 r5:00000000
[ 25.628567] r4:edcde380
[ 25.631110] [<80142634>] (kthread) from [<801010e8>]
(ret_from_fork+0x14/0x2c)
[ 25.638336] Exception stack(0xedf69fb0 to 0xedf69ff8)
[ 25.682929] ---[ end trace 8236a5496f5b5d3b ]---
Signed-off-by: Siva Rebbagondla <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/rsi/rsi_91x_usb.c | 11 +++++++----
1 file changed, 7 insertions(+), 4 deletions(-)
diff --git a/drivers/net/wireless/rsi/rsi_91x_usb.c b/drivers/net/wireless/rsi/rsi_91x_usb.c
index c0a163e40402..f360690396dd 100644
--- a/drivers/net/wireless/rsi/rsi_91x_usb.c
+++ b/drivers/net/wireless/rsi/rsi_91x_usb.c
@@ -266,15 +266,17 @@ static void rsi_rx_done_handler(struct urb *urb)
if (urb->status)
goto out;
- if (urb->actual_length <= 0) {
- rsi_dbg(INFO_ZONE, "%s: Zero length packet\n", __func__);
+ if (urb->actual_length <= 0 ||
+ urb->actual_length > rx_cb->rx_skb->len) {
+ rsi_dbg(INFO_ZONE, "%s: Invalid packet length = %d\n",
+ __func__, urb->actual_length);
goto out;
}
if (skb_queue_len(&dev->rx_q) >= RSI_MAX_RX_PKTS) {
rsi_dbg(INFO_ZONE, "Max RX packets reached\n");
goto out;
}
- skb_put(rx_cb->rx_skb, urb->actual_length);
+ skb_trim(rx_cb->rx_skb, urb->actual_length);
skb_queue_tail(&dev->rx_q, rx_cb->rx_skb);
rsi_set_event(&dev->rx_thread.event);
@@ -308,6 +310,7 @@ static int rsi_rx_urb_submit(struct rsi_hw *adapter, u8 ep_num)
if (!skb)
return -ENOMEM;
skb_reserve(skb, MAX_DWORD_ALIGN_BYTES);
+ skb_put(skb, RSI_MAX_RX_USB_PKT_SIZE - MAX_DWORD_ALIGN_BYTES);
dword_align_bytes = (unsigned long)skb->data & 0x3f;
if (dword_align_bytes > 0)
skb_push(skb, dword_align_bytes);
@@ -319,7 +322,7 @@ static int rsi_rx_urb_submit(struct rsi_hw *adapter, u8 ep_num)
usb_rcvbulkpipe(dev->usbdev,
dev->bulkin_endpoint_addr[ep_num - 1]),
urb->transfer_buffer,
- RSI_MAX_RX_USB_PKT_SIZE,
+ skb->len,
rsi_rx_done_handler,
rx_cb);
--
2.17.1
From: Andrew Lunn <[email protected]>
[ Upstream commit c309b158090d788e96ee597444965cb79b040484 ]
After changing to the needed page, actually write the value to the
register!
Fixes: 09cb7dfd3f14 ("net: dsa: mv88e6xxx: describe PHY page and SerDes")
Signed-off-by: Andrew Lunn <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/dsa/mv88e6xxx/phy.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/net/dsa/mv88e6xxx/phy.c b/drivers/net/dsa/mv88e6xxx/phy.c
index 46af8052e535..152a65d46e0b 100644
--- a/drivers/net/dsa/mv88e6xxx/phy.c
+++ b/drivers/net/dsa/mv88e6xxx/phy.c
@@ -110,6 +110,9 @@ int mv88e6xxx_phy_page_write(struct mv88e6xxx_chip *chip, int phy,
err = mv88e6xxx_phy_page_get(chip, phy, page);
if (!err) {
err = mv88e6xxx_phy_write(chip, phy, MV88E6XXX_PHY_PAGE, page);
+ if (!err)
+ err = mv88e6xxx_phy_write(chip, phy, reg, val);
+
mv88e6xxx_phy_page_put(chip, phy);
}
--
2.17.1
From: Stephen Boyd <[email protected]>
[ Upstream commit 89c68b102f13f123aaef22b292526d6b92501334 ]
It looks like we parse the drive strength setting here, but never
actually write it into the hardware to update it. Parse the setting and
then write it at the end of the pinconf setting function so that it
actually sticks in the hardware.
Fixes: 0e948042c420 ("pinctrl: qcom: spmi-mpp: Implement support for sink mode")
Cc: Doug Anderson <[email protected]>
Signed-off-by: Stephen Boyd <[email protected]>
Reviewed-by: Bjorn Andersson <[email protected]>
Signed-off-by: Linus Walleij <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/pinctrl/qcom/pinctrl-spmi-mpp.c | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
diff --git a/drivers/pinctrl/qcom/pinctrl-spmi-mpp.c b/drivers/pinctrl/qcom/pinctrl-spmi-mpp.c
index 418bc40df7ca..7577f133d326 100644
--- a/drivers/pinctrl/qcom/pinctrl-spmi-mpp.c
+++ b/drivers/pinctrl/qcom/pinctrl-spmi-mpp.c
@@ -457,7 +457,7 @@ static int pmic_mpp_config_set(struct pinctrl_dev *pctldev, unsigned int pin,
pad->dtest = arg;
break;
case PIN_CONFIG_DRIVE_STRENGTH:
- arg = pad->drive_strength;
+ pad->drive_strength = arg;
break;
case PMIC_MPP_CONF_AMUX_ROUTE:
if (arg >= PMIC_MPP_AMUX_ROUTE_ABUS4)
@@ -504,6 +504,10 @@ static int pmic_mpp_config_set(struct pinctrl_dev *pctldev, unsigned int pin,
if (ret < 0)
return ret;
+ ret = pmic_mpp_write(state, pad, PMIC_MPP_REG_SINK_CTL, pad->drive_strength);
+ if (ret < 0)
+ return ret;
+
val = pad->is_enabled << PMIC_MPP_REG_MASTER_EN_SHIFT;
return pmic_mpp_write(state, pad, PMIC_MPP_REG_EN_CTL, val);
--
2.17.1
From: Hans de Goede <[email protected]>
[ Upstream commit 240714061c58e6b1abfb3322398a7634151c06cb ]
Bay and Cherry Trail DSTDs represent a different set of devices depending
on which OS the device think it is booting. One set of decices for Windows
and another set of devices for Android which targets the Android-x86 Linux
kernel fork (which e.g. used to have its own display driver instead of
using the i915 driver).
Which set of devices we are actually going to get is out of our control,
this is controlled by the ACPI OSID variable, which gets either set through
an EFI setup option, or sometimes is autodetected. So we need to support
both.
This commit adds support for the 80862286 and 808622C0 ACPI HIDs which we
get for the first resp. second DMA controller on Cherry Trail devices when
OSID is set to Android.
Signed-off-by: Hans de Goede <[email protected]>
Reviewed-by: Andy Shevchenko <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/acpi/acpi_lpss.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/acpi/acpi_lpss.c b/drivers/acpi/acpi_lpss.c
index bf64cfa30feb..969bf8d515c0 100644
--- a/drivers/acpi/acpi_lpss.c
+++ b/drivers/acpi/acpi_lpss.c
@@ -327,9 +327,11 @@ static const struct acpi_device_id acpi_lpss_device_ids[] = {
{ "INT33FC", },
/* Braswell LPSS devices */
+ { "80862286", LPSS_ADDR(lpss_dma_desc) },
{ "80862288", LPSS_ADDR(bsw_pwm_dev_desc) },
{ "8086228A", LPSS_ADDR(bsw_uart_dev_desc) },
{ "8086228E", LPSS_ADDR(bsw_spi_dev_desc) },
+ { "808622C0", LPSS_ADDR(lpss_dma_desc) },
{ "808622C1", LPSS_ADDR(bsw_i2c_dev_desc) },
/* Broadwell LPSS devices */
--
2.17.1
From: Linus Walleij <[email protected]>
[ Upstream commit abf5feef3ff0cefade0c76be53b59e55fdd46093 ]
There is a logical problem in spi-gpio with host just
assigning a MOSI line and no MISO: this is interpreted
as the host cannot do RX and the host is flagged with
SPI_MASTER_NO_RX.
This is wrong: since GPIO lines can switch direction,
in 3WIRE operation the host will simply reverse the
direction of the GPIO line and start reading from it,
there is even code for doing this in the driver, but
it went unnoticed because it was tested by using a
master with 4 wires but a device using just 3 wires.
Remove the offending flag.
Cc: Andrzej Hajda <[email protected]>
Cc: Lorenzo Bianconi <[email protected]>
Signed-off-by: Linus Walleij <[email protected]>
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/spi/spi-gpio.c | 10 ++++++----
1 file changed, 6 insertions(+), 4 deletions(-)
diff --git a/drivers/spi/spi-gpio.c b/drivers/spi/spi-gpio.c
index 421bfc7dda67..088772ebef9b 100644
--- a/drivers/spi/spi-gpio.c
+++ b/drivers/spi/spi-gpio.c
@@ -295,9 +295,11 @@ static int spi_gpio_request(struct device *dev,
spi_gpio->miso = devm_gpiod_get_optional(dev, "miso", GPIOD_IN);
if (IS_ERR(spi_gpio->miso))
return PTR_ERR(spi_gpio->miso);
- if (!spi_gpio->miso)
- /* HW configuration without MISO pin */
- *mflags |= SPI_MASTER_NO_RX;
+ /*
+ * No setting SPI_MASTER_NO_RX here - if there is only a MOSI
+ * pin connected the host can still do RX by changing the
+ * direction of the line.
+ */
spi_gpio->sck = devm_gpiod_get(dev, "sck", GPIOD_OUT_LOW);
if (IS_ERR(spi_gpio->sck))
@@ -423,7 +425,7 @@ static int spi_gpio_probe(struct platform_device *pdev)
spi_gpio->bitbang.chipselect = spi_gpio_chipselect;
spi_gpio->bitbang.set_line_direction = spi_gpio_set_direction;
- if ((master_flags & (SPI_MASTER_NO_TX | SPI_MASTER_NO_RX)) == 0) {
+ if ((master_flags & SPI_MASTER_NO_TX) == 0) {
spi_gpio->bitbang.txrx_word[SPI_MODE_0] = spi_gpio_txrx_word_mode0;
spi_gpio->bitbang.txrx_word[SPI_MODE_1] = spi_gpio_txrx_word_mode1;
spi_gpio->bitbang.txrx_word[SPI_MODE_2] = spi_gpio_txrx_word_mode2;
--
2.17.1
From: Masami Hiramatsu <[email protected]>
[ Upstream commit 819319fc93461c07b9cdb3064f154bd8cfd48172 ]
Make reuse_unused_kprobe() to return error code if
it fails to reuse unused kprobe for optprobe instead
of calling BUG_ON().
Signed-off-by: Masami Hiramatsu <[email protected]>
Cc: Anil S Keshavamurthy <[email protected]>
Cc: David S . Miller <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Naveen N . Rao <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Link: http://lkml.kernel.org/r/153666124040.21306.14150398706331307654.stgit@devbox
Signed-off-by: Ingo Molnar <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
kernel/kprobes.c | 27 ++++++++++++++++++++-------
1 file changed, 20 insertions(+), 7 deletions(-)
diff --git a/kernel/kprobes.c b/kernel/kprobes.c
index ab257be4d924..4344381664cc 100644
--- a/kernel/kprobes.c
+++ b/kernel/kprobes.c
@@ -700,9 +700,10 @@ static void unoptimize_kprobe(struct kprobe *p, bool force)
}
/* Cancel unoptimizing for reusing */
-static void reuse_unused_kprobe(struct kprobe *ap)
+static int reuse_unused_kprobe(struct kprobe *ap)
{
struct optimized_kprobe *op;
+ int ret;
BUG_ON(!kprobe_unused(ap));
/*
@@ -714,8 +715,12 @@ static void reuse_unused_kprobe(struct kprobe *ap)
/* Enable the probe again */
ap->flags &= ~KPROBE_FLAG_DISABLED;
/* Optimize it again (remove from op->list) */
- BUG_ON(!kprobe_optready(ap));
+ ret = kprobe_optready(ap);
+ if (ret)
+ return ret;
+
optimize_kprobe(ap);
+ return 0;
}
/* Remove optimized instructions */
@@ -940,11 +945,16 @@ static void __disarm_kprobe(struct kprobe *p, bool reopt)
#define kprobe_disarmed(p) kprobe_disabled(p)
#define wait_for_kprobe_optimizer() do {} while (0)
-/* There should be no unused kprobes can be reused without optimization */
-static void reuse_unused_kprobe(struct kprobe *ap)
+static int reuse_unused_kprobe(struct kprobe *ap)
{
+ /*
+ * If the optimized kprobe is NOT supported, the aggr kprobe is
+ * released at the same time that the last aggregated kprobe is
+ * unregistered.
+ * Thus there should be no chance to reuse unused kprobe.
+ */
printk(KERN_ERR "Error: There should be no unused kprobe here.\n");
- BUG_ON(kprobe_unused(ap));
+ return -EINVAL;
}
static void free_aggr_kprobe(struct kprobe *p)
@@ -1318,9 +1328,12 @@ static int register_aggr_kprobe(struct kprobe *orig_p, struct kprobe *p)
goto out;
}
init_aggr_kprobe(ap, orig_p);
- } else if (kprobe_unused(ap))
+ } else if (kprobe_unused(ap)) {
/* This probe is going to die. Rescue it */
- reuse_unused_kprobe(ap);
+ ret = reuse_unused_kprobe(ap);
+ if (ret)
+ goto out;
+ }
if (kprobe_gone(ap)) {
/*
--
2.17.1
From: Fuyun Liang <[email protected]>
[ Upstream commit 2f7e489611bc685b8e00aba436032a8aac6cac57 ]
We clear STATE_DOWN bit of hdev state when starting net, but do not set
it again when stopping net. It causes that the net is down, but hdev state
is still up. STATE_DOWN bit of hdev state should be set when stopping net.
Fixes: 46a3df9f9718 ("net: hns3: Add HNS3 Acceleration Engine & Compatibility Layer Support")
Fixes: e2cb1dec9779 ("net: hns3: Add HNS3 VF HCL(Hardware Compatibility Layer) Support")
Signed-off-by: Fuyun Liang <[email protected]>
Signed-off-by: Peng Li <[email protected]>
Signed-off-by: Salil Mehta <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c | 2 ++
drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c | 2 ++
2 files changed, 4 insertions(+)
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
index 0c64089c914f..dd1e390ed68e 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
@@ -3814,6 +3814,8 @@ static void hclge_ae_stop(struct hnae3_handle *handle)
struct hclge_dev *hdev = vport->back;
int i;
+ set_bit(HCLGE_STATE_DOWN, &hdev->state);
+
del_timer_sync(&hdev->service_timer);
cancel_work_sync(&hdev->service_task);
clear_bit(HCLGE_STATE_SERVICE_SCHED, &hdev->state);
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c b/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c
index d78064bb718a..320043e87fc6 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c
@@ -1451,6 +1451,8 @@ static void hclgevf_ae_stop(struct hnae3_handle *handle)
struct hclgevf_dev *hdev = hclgevf_ae_get_hdev(handle);
int i, queue_id;
+ set_bit(HCLGEVF_STATE_DOWN, &hdev->state);
+
for (i = 0; i < hdev->num_tqps; i++) {
/* Ring disable */
queue_id = hclgevf_get_queue_id(handle->kinfo.tqp[i]);
--
2.17.1
From: Antoine Tenart <[email protected]>
[ Upstream commit aeeb2e8fdefdd5d257a1446351c70cb3df540199 ]
Phylink made an assumption about the carrier state being down when
calling phylink_start(). If this assumption isn't satisfied, the
internal phylink state could misbehave and a net device could end up not
being functional.
This patch fixes this by explicitly calling netif_carrier_off() in
phylink_start().
Signed-off-by: Antoine Tenart <[email protected]>
Acked-by: Russell King <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/phy/phylink.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/net/phy/phylink.c b/drivers/net/phy/phylink.c
index 7abca86c3aa9..70f3f90c2ed6 100644
--- a/drivers/net/phy/phylink.c
+++ b/drivers/net/phy/phylink.c
@@ -907,6 +907,9 @@ void phylink_start(struct phylink *pl)
phylink_an_mode_str(pl->link_an_mode),
phy_modes(pl->link_config.interface));
+ /* Always set the carrier off */
+ netif_carrier_off(pl->netdev);
+
/* Apply the link configuration to the MAC when starting. This allows
* a fixed-link to start with the correct parameters, and also
* ensures that we set the appropriate advertisement for Serdes links.
--
2.17.1
From: Peng Li <[email protected]>
[ Upstream commit 582d37bbb613b8ad86bf82845d3a74a02a5a0fa1 ]
By default, HW link status is up. If hclge_update_link_status is called
before net up, driver will print "link up". It is not suitable. hdev
state check is needed when getting link status.
Fixes: 46a3df9f9718 ("net: hns3: Add HNS3 Acceleration Engine & Compatibility Layer Support")
Fixes: e2cb1dec9779 ("net: hns3: Add HNS3 VF HCL(Hardware Compatibility Layer) Support")
Signed-off-by: Fuyun Liang <[email protected]>
Signed-off-by: Peng Li <[email protected]>
Signed-off-by: Salil Mehta <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c | 3 +++
drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c | 3 +++
2 files changed, 6 insertions(+)
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
index 023910abc831..0c64089c914f 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
@@ -2362,6 +2362,9 @@ static int hclge_get_mac_phy_link(struct hclge_dev *hdev)
int mac_state;
int link_stat;
+ if (test_bit(HCLGE_STATE_DOWN, &hdev->state))
+ return 0;
+
mac_state = hclge_get_mac_link_status(hdev);
if (hdev->hw.mac.phydev) {
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c b/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c
index 9c0091f2addf..d78064bb718a 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c
@@ -299,6 +299,9 @@ void hclgevf_update_link_status(struct hclgevf_dev *hdev, int link_state)
client = handle->client;
+ link_state =
+ test_bit(HCLGEVF_STATE_DOWN, &hdev->state) ? 0 : link_state;
+
if (link_state != hdev->hw.mac.link) {
client->ops->link_status_change(handle, !!link_state);
hdev->hw.mac.link = link_state;
--
2.17.1
From: Arend van Spriel <[email protected]>
[ Upstream commit 330994e8e8ec5d0b269a5265e6032b37e29aa336 ]
Decoding of firmware channel information was not complete for 160MHz
support. This resulted in the following warning:
WARNING: CPU: 2 PID: 2222 at .../broadcom/brcm80211/brcmutil/d11.c:196
brcmu_d11ac_decchspec+0x2e/0x100 [brcmutil]
Modules linked in: brcmfmac(O) brcmutil(O) sha256_generic cfg80211 ...
CPU: 2 PID: 2222 Comm: kworker/2:0 Tainted: G O
4.17.0-wt-testing-x64-00002-gf1bed50 #1
Hardware name: Dell Inc. Latitude E6410/07XJP9, BIOS A07 02/15/2011
Workqueue: events request_firmware_work_func
RIP: 0010:brcmu_d11ac_decchspec+0x2e/0x100 [brcmutil]
RSP: 0018:ffffc90000047bd0 EFLAGS: 00010206
RAX: 000000000000e832 RBX: ffff8801146fe910 RCX: ffff8801146fd3c0
RDX: 0000000000002800 RSI: 0000000000000070 RDI: ffffc90000047c30
RBP: ffffc90000047bd0 R08: 0000000000000000 R09: ffffffffa0798c80
R10: ffff88012bca55e0 R11: ffff880110a4ea00 R12: ffff8801146f8000
R13: ffffc90000047c30 R14: ffff8801146fe930 R15: ffff8801138e02e0
FS: 0000000000000000(0000) GS:ffff88012bc80000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f18ce8b8070 CR3: 000000000200a003 CR4: 00000000000206e0
Call Trace:
brcmf_setup_wiphybands+0x212/0x780 [brcmfmac]
brcmf_cfg80211_attach+0xae2/0x11a0 [brcmfmac]
brcmf_attach+0x1fc/0x4b0 [brcmfmac]
? __kmalloc+0x13c/0x1c0
brcmf_pcie_setup+0x99b/0xe00 [brcmfmac]
brcmf_fw_request_done+0x16a/0x1f0 [brcmfmac]
request_firmware_work_func+0x36/0x60
process_one_work+0x146/0x350
worker_thread+0x4a/0x3b0
kthread+0x102/0x140
? process_one_work+0x350/0x350
? kthread_bind+0x20/0x20
ret_from_fork+0x35/0x40
Code: 66 90 0f b7 07 55 48 89 e5 89 c2 88 47 02 88 47 03 66 81 e2 00 38
66 81 fa 00 18 74 6e 66 81 fa 00 20 74 39 66 81 fa 00 10 74 14 <0f>
0b 66 25 00 c0 74 20 66 3d 00 c0 75 20 c6 47 04 01 5d c3 66
---[ end trace 550c46682415b26d ]---
brcmfmac: brcmf_construct_chaninfo: Ignoring unexpected firmware channel 50
This patch adds the missing stuff to properly handle this.
Reviewed-by: Hante Meuleman <[email protected]>
Reviewed-by: Pieter-Paul Giesberts <[email protected]>
Reviewed-by: Franky Lin <[email protected]>
Signed-off-by: Arend van Spriel <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
.../broadcom/brcm80211/brcmutil/d11.c | 34 ++++++++++++++++++-
.../broadcom/brcm80211/include/brcmu_wifi.h | 2 ++
2 files changed, 35 insertions(+), 1 deletion(-)
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmutil/d11.c b/drivers/net/wireless/broadcom/brcm80211/brcmutil/d11.c
index d8b79cb72b58..e7584b842dce 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmutil/d11.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmutil/d11.c
@@ -77,6 +77,8 @@ static u16 d11ac_bw(enum brcmu_chan_bw bw)
return BRCMU_CHSPEC_D11AC_BW_40;
case BRCMU_CHAN_BW_80:
return BRCMU_CHSPEC_D11AC_BW_80;
+ case BRCMU_CHAN_BW_160:
+ return BRCMU_CHSPEC_D11AC_BW_160;
default:
WARN_ON(1);
}
@@ -190,8 +192,38 @@ static void brcmu_d11ac_decchspec(struct brcmu_chan *ch)
break;
}
break;
- case BRCMU_CHSPEC_D11AC_BW_8080:
case BRCMU_CHSPEC_D11AC_BW_160:
+ switch (ch->sb) {
+ case BRCMU_CHAN_SB_LLL:
+ ch->control_ch_num -= CH_70MHZ_APART;
+ break;
+ case BRCMU_CHAN_SB_LLU:
+ ch->control_ch_num -= CH_50MHZ_APART;
+ break;
+ case BRCMU_CHAN_SB_LUL:
+ ch->control_ch_num -= CH_30MHZ_APART;
+ break;
+ case BRCMU_CHAN_SB_LUU:
+ ch->control_ch_num -= CH_10MHZ_APART;
+ break;
+ case BRCMU_CHAN_SB_ULL:
+ ch->control_ch_num += CH_10MHZ_APART;
+ break;
+ case BRCMU_CHAN_SB_ULU:
+ ch->control_ch_num += CH_30MHZ_APART;
+ break;
+ case BRCMU_CHAN_SB_UUL:
+ ch->control_ch_num += CH_50MHZ_APART;
+ break;
+ case BRCMU_CHAN_SB_UUU:
+ ch->control_ch_num += CH_70MHZ_APART;
+ break;
+ default:
+ WARN_ON_ONCE(1);
+ break;
+ }
+ break;
+ case BRCMU_CHSPEC_D11AC_BW_8080:
default:
WARN_ON_ONCE(1);
break;
diff --git a/drivers/net/wireless/broadcom/brcm80211/include/brcmu_wifi.h b/drivers/net/wireless/broadcom/brcm80211/include/brcmu_wifi.h
index 7b9a77981df1..75b2a0438cfa 100644
--- a/drivers/net/wireless/broadcom/brcm80211/include/brcmu_wifi.h
+++ b/drivers/net/wireless/broadcom/brcm80211/include/brcmu_wifi.h
@@ -29,6 +29,8 @@
#define CH_UPPER_SB 0x01
#define CH_LOWER_SB 0x02
#define CH_EWA_VALID 0x04
+#define CH_70MHZ_APART 14
+#define CH_50MHZ_APART 10
#define CH_30MHZ_APART 6
#define CH_20MHZ_APART 4
#define CH_10MHZ_APART 2
--
2.17.1
From: Alexei Starovoitov <[email protected]>
[ Upstream commit a9c676bc8fc58d00eea9836fb14ee43c0346416a ]
Edward Cree says:
In check_mem_access(), for the PTR_TO_CTX case, after check_ctx_access()
has supplied a reg_type, the other members of the register state are set
appropriately. Previously reg.range was set to 0, but as it is in a
union with reg.map_ptr, which is larger, upper bytes of the latter were
left in place. This then caused the memcmp() in regsafe() to fail,
preventing some branches from being pruned (and occasionally causing the
same program to take a varying number of processed insns on repeated
verifier runs).
Fix the instability by clearing bpf_reg_state in __mark_reg_[un]known()
Fixes: f1174f77b50c ("bpf/verifier: rework value tracking")
Debugged-by: Edward Cree <[email protected]>
Acked-by: Edward Cree <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
kernel/bpf/verifier.c | 16 ++++++++--------
1 file changed, 8 insertions(+), 8 deletions(-)
diff --git a/kernel/bpf/verifier.c b/kernel/bpf/verifier.c
index 465952a8e465..f0a2f49ff194 100644
--- a/kernel/bpf/verifier.c
+++ b/kernel/bpf/verifier.c
@@ -553,7 +553,9 @@ static void __mark_reg_not_init(struct bpf_reg_state *reg);
*/
static void __mark_reg_known(struct bpf_reg_state *reg, u64 imm)
{
- reg->id = 0;
+ /* Clear id, off, and union(map_ptr, range) */
+ memset(((u8 *)reg) + sizeof(reg->type), 0,
+ offsetof(struct bpf_reg_state, var_off) - sizeof(reg->type));
reg->var_off = tnum_const(imm);
reg->smin_value = (s64)imm;
reg->smax_value = (s64)imm;
@@ -572,7 +574,6 @@ static void __mark_reg_known_zero(struct bpf_reg_state *reg)
static void __mark_reg_const_zero(struct bpf_reg_state *reg)
{
__mark_reg_known(reg, 0);
- reg->off = 0;
reg->type = SCALAR_VALUE;
}
@@ -683,9 +684,12 @@ static void __mark_reg_unbounded(struct bpf_reg_state *reg)
/* Mark a register as having a completely unknown (scalar) value. */
static void __mark_reg_unknown(struct bpf_reg_state *reg)
{
+ /*
+ * Clear type, id, off, and union(map_ptr, range) and
+ * padding between 'type' and union
+ */
+ memset(reg, 0, offsetof(struct bpf_reg_state, var_off));
reg->type = SCALAR_VALUE;
- reg->id = 0;
- reg->off = 0;
reg->var_off = tnum_unknown;
reg->frameno = 0;
__mark_reg_unbounded(reg);
@@ -1727,9 +1731,6 @@ static int check_mem_access(struct bpf_verifier_env *env, int insn_idx, u32 regn
else
mark_reg_known_zero(env, regs,
value_regno);
- regs[value_regno].id = 0;
- regs[value_regno].off = 0;
- regs[value_regno].range = 0;
regs[value_regno].type = reg_type;
}
@@ -2580,7 +2581,6 @@ static int check_helper_call(struct bpf_verifier_env *env, int func_id, int insn
regs[BPF_REG_0].type = PTR_TO_MAP_VALUE_OR_NULL;
/* There is no offset yet applied, variable or fixed */
mark_reg_known_zero(env, regs, BPF_REG_0);
- regs[BPF_REG_0].off = 0;
/* remember map_ptr, so that check_map_access()
* can check 'value_size' boundary of memory access
* to map element returned from bpf_map_lookup_elem()
--
2.17.1
From: YueHaibing <[email protected]>
[ Upstream commit a4925311a5443126ecc90671a1604ea7b0f5b32e ]
fixes following Smatch static check warning:
./drivers/pinctrl/sunxi/pinctrl-sunxi.c:1112 sunxi_pinctrl_build_state()
warn: passing devm_ allocated variable to kfree. 'pctrl->functions'
As we will be calling krealloc() on pointer 'pctrl->functions', which means
kfree() will be called in there, devm_kzalloc() shouldn't be used with
the allocation in the first place. Fix the warning by calling kcalloc()
and managing the free procedure in error path on our own.
Fixes: 0e37f88d9ad8 ("ARM: sunxi: Add pinctrl driver for Allwinner SoCs")
Signed-off-by: YueHaibing <[email protected]>
Acked-by: Maxime Ripard <[email protected]>
Signed-off-by: Linus Walleij <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/pinctrl/sunxi/pinctrl-sunxi.c | 15 +++++++++------
1 file changed, 9 insertions(+), 6 deletions(-)
diff --git a/drivers/pinctrl/sunxi/pinctrl-sunxi.c b/drivers/pinctrl/sunxi/pinctrl-sunxi.c
index 4d9bf9b3e9f3..26ebedc1f6d3 100644
--- a/drivers/pinctrl/sunxi/pinctrl-sunxi.c
+++ b/drivers/pinctrl/sunxi/pinctrl-sunxi.c
@@ -1079,10 +1079,9 @@ static int sunxi_pinctrl_build_state(struct platform_device *pdev)
* We suppose that we won't have any more functions than pins,
* we'll reallocate that later anyway
*/
- pctl->functions = devm_kcalloc(&pdev->dev,
- pctl->ngroups,
- sizeof(*pctl->functions),
- GFP_KERNEL);
+ pctl->functions = kcalloc(pctl->ngroups,
+ sizeof(*pctl->functions),
+ GFP_KERNEL);
if (!pctl->functions)
return -ENOMEM;
@@ -1133,8 +1132,10 @@ static int sunxi_pinctrl_build_state(struct platform_device *pdev)
func_item = sunxi_pinctrl_find_function_by_name(pctl,
func->name);
- if (!func_item)
+ if (!func_item) {
+ kfree(pctl->functions);
return -EINVAL;
+ }
if (!func_item->groups) {
func_item->groups =
@@ -1142,8 +1143,10 @@ static int sunxi_pinctrl_build_state(struct platform_device *pdev)
func_item->ngroups,
sizeof(*func_item->groups),
GFP_KERNEL);
- if (!func_item->groups)
+ if (!func_item->groups) {
+ kfree(pctl->functions);
return -ENOMEM;
+ }
}
func_grp = func_item->groups;
--
2.17.1
From: Jian Shen <[email protected]>
[ Upstream commit adefc0a2ff465f4ac4a88450fe69d336c8b074c5 ]
There is a defect in hclge_ets_validate(). If each member of tc_tsa is
not IEEE_8021QAZ_TSA_ETS, the variable total_ets_bw won't be updated.
In this case, the check for value of total_ets_bw will fail. This patch
fixes it by checking total_ets_bw only after it has been updated.
Fixes: cacde272dd00 ("net: hns3: Add hclge_dcb module for the support of DCB feature")
Signed-off-by: Jian Shen <[email protected]>
Signed-off-by: Peng Li <[email protected]>
Signed-off-by: Salil Mehta <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_dcb.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_dcb.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_dcb.c
index f08ebb7caaaf..92f19384e258 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_dcb.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_dcb.c
@@ -73,6 +73,7 @@ static int hclge_ieee_getets(struct hnae3_handle *h, struct ieee_ets *ets)
static int hclge_ets_validate(struct hclge_dev *hdev, struct ieee_ets *ets,
u8 *tc, bool *changed)
{
+ bool has_ets_tc = false;
u32 total_ets_bw = 0;
u8 max_tc = 0;
u8 i;
@@ -100,13 +101,14 @@ static int hclge_ets_validate(struct hclge_dev *hdev, struct ieee_ets *ets,
*changed = true;
total_ets_bw += ets->tc_tx_bw[i];
- break;
+ has_ets_tc = true;
+ break;
default:
return -EINVAL;
}
}
- if (total_ets_bw != BW_PERCENT)
+ if (has_ets_tc && total_ets_bw != BW_PERCENT)
return -EINVAL;
*tc = max_tc + 1;
--
2.17.1
From: Ben Hutchings <[email protected]>
[ Upstream commit 9c1442a9d039a1a3302fa93e9a11001c5f23b624 ]
We currently align the end of the compressed image to a multiple of
16. However, the PE-COFF header included in the EFI stub says that
the file alignment is 32 bytes, and when adding an EFI signature to
the file it must first be padded to this alignment.
sbsigntool commands warn about this:
warning: file-aligned section .text extends beyond end of file
warning: checksum areas are greater than image size. Invalid section table?
Worse, pesign -at least when creating a detached signature- uses the
hash of the unpadded file, resulting in an invalid signature if
padding is required.
Avoid both these problems by increasing alignment to 32 bytes when
CONFIG_EFI_STUB is enabled.
Signed-off-by: Ben Hutchings <[email protected]>
Signed-off-by: Ard Biesheuvel <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/x86/boot/tools/build.c | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/arch/x86/boot/tools/build.c b/arch/x86/boot/tools/build.c
index d4e6cd4577e5..bf0e82400358 100644
--- a/arch/x86/boot/tools/build.c
+++ b/arch/x86/boot/tools/build.c
@@ -391,6 +391,13 @@ int main(int argc, char ** argv)
die("Unable to mmap '%s': %m", argv[2]);
/* Number of 16-byte paragraphs, including space for a 4-byte CRC */
sys_size = (sz + 15 + 4) / 16;
+#ifdef CONFIG_EFI_STUB
+ /*
+ * COFF requires minimum 32-byte alignment of sections, and
+ * adding a signature is problematic without that alignment.
+ */
+ sys_size = (sys_size + 1) & ~1;
+#endif
/* Patch the setup code with the appropriate size parameters */
buf[0x1f1] = setup_sectors-1;
--
2.17.1
From: Will Deacon <[email protected]>
[ Upstream commit 0bf0f444b2c49241b2b39aa3cf210d7c95ef6c34 ]
Rather than panic() when taking an undefined instruction exception from
EL1, allow a hook to be registered in case we want to emulate the
instruction, like we will for the SSBS PSTATE manipulation instructions.
Signed-off-by: Will Deacon <[email protected]>
Signed-off-by: Catalin Marinas <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm64/kernel/entry.S | 2 +-
arch/arm64/kernel/traps.c | 11 +++++++----
2 files changed, 8 insertions(+), 5 deletions(-)
diff --git a/arch/arm64/kernel/entry.S b/arch/arm64/kernel/entry.S
index 09dbea221a27..8556876c9109 100644
--- a/arch/arm64/kernel/entry.S
+++ b/arch/arm64/kernel/entry.S
@@ -589,7 +589,7 @@ el1_undef:
inherit_daif pstate=x23, tmp=x2
mov x0, sp
bl do_undefinstr
- ASM_BUG()
+ kernel_exit 1
el1_dbg:
/*
* Debug exception handling
diff --git a/arch/arm64/kernel/traps.c b/arch/arm64/kernel/traps.c
index 039e9ff379cc..b9da093e0341 100644
--- a/arch/arm64/kernel/traps.c
+++ b/arch/arm64/kernel/traps.c
@@ -310,10 +310,12 @@ static int call_undef_hook(struct pt_regs *regs)
int (*fn)(struct pt_regs *regs, u32 instr) = NULL;
void __user *pc = (void __user *)instruction_pointer(regs);
- if (!user_mode(regs))
- return 1;
-
- if (compat_thumb_mode(regs)) {
+ if (!user_mode(regs)) {
+ __le32 instr_le;
+ if (probe_kernel_address((__force __le32 *)pc, instr_le))
+ goto exit;
+ instr = le32_to_cpu(instr_le);
+ } else if (compat_thumb_mode(regs)) {
/* 16-bit Thumb instruction */
__le16 instr_le;
if (get_user(instr_le, (__le16 __user *)pc))
@@ -407,6 +409,7 @@ asmlinkage void __exception do_undefinstr(struct pt_regs *regs)
return;
force_signal_inject(SIGILL, ILL_ILLOPC, regs->pc);
+ BUG_ON(!user_mode(regs));
}
void cpu_enable_cache_maint_trap(const struct arm64_cpu_capabilities *__unused)
--
2.17.1
From: YueHaibing <[email protected]>
[ Upstream commit 69f8455f6cc78fa6cdf80d0105d7a748106271dc ]
'ret' should be returned while pmic_mpp_write_mode_ctl fails.
Fixes: 0e948042c420 ("pinctrl: qcom: spmi-mpp: Implement support for sink mode")
Signed-off-by: YueHaibing <[email protected]>
Signed-off-by: Linus Walleij <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/pinctrl/qcom/pinctrl-spmi-mpp.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/pinctrl/qcom/pinctrl-spmi-mpp.c b/drivers/pinctrl/qcom/pinctrl-spmi-mpp.c
index 6556dbeae65e..418bc40df7ca 100644
--- a/drivers/pinctrl/qcom/pinctrl-spmi-mpp.c
+++ b/drivers/pinctrl/qcom/pinctrl-spmi-mpp.c
@@ -319,6 +319,8 @@ static int pmic_mpp_set_mux(struct pinctrl_dev *pctldev, unsigned function,
pad->function = function;
ret = pmic_mpp_write_mode_ctl(state, pad);
+ if (ret < 0)
+ return ret;
val = pad->is_enabled << PMIC_MPP_REG_MASTER_EN_SHIFT;
--
2.17.1
From: Hans de Goede <[email protected]>
[ Upstream commit c33ce984435bb6142792802d75513a71e55d1969 ]
Before this commit we were only calling efi_parse_options() from
make_boot_params(), but make_boot_params() only gets called if the
kernel gets booted directly as an EFI executable. So when booted through
e.g. grub we ended up not parsing the commandline in the boot code.
This makes the drivers/firmware/efi/libstub code ignore the "quiet"
commandline argument resulting in the following message being printed:
"EFI stub: UEFI Secure Boot is enabled."
Despite the quiet request. This commits adds an extra call to
efi_parse_options() to efi_main() to make sure that the options are
always processed. This fixes quiet not working.
This also fixes the libstub code ignoring nokaslr and efi=nochunk.
Reported-by: Peter Robinson <[email protected]>
Signed-off-by: Hans de Goede <[email protected]>
Signed-off-by: Ard Biesheuvel <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/x86/boot/compressed/eboot.c | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/arch/x86/boot/compressed/eboot.c b/arch/x86/boot/compressed/eboot.c
index 1458b1700fc7..8b4c5e001157 100644
--- a/arch/x86/boot/compressed/eboot.c
+++ b/arch/x86/boot/compressed/eboot.c
@@ -738,6 +738,7 @@ efi_main(struct efi_config *c, struct boot_params *boot_params)
struct desc_struct *desc;
void *handle;
efi_system_table_t *_table;
+ unsigned long cmdline_paddr;
efi_early = c;
@@ -755,6 +756,15 @@ efi_main(struct efi_config *c, struct boot_params *boot_params)
else
setup_boot_services32(efi_early);
+ /*
+ * make_boot_params() may have been called before efi_main(), in which
+ * case this is the second time we parse the cmdline. This is ok,
+ * parsing the cmdline multiple times does not have side-effects.
+ */
+ cmdline_paddr = ((u64)hdr->cmd_line_ptr |
+ ((u64)boot_params->ext_cmd_line_ptr << 32));
+ efi_parse_options((char *)cmdline_paddr);
+
/*
* If the boot loader gave us a value for secure_boot then we use that,
* otherwise we ask the BIOS.
--
2.17.1
From: Paolo Valente <[email protected]>
[ Upstream commit cbeb869a3d1110450186b738199963c5e68c2a71 ]
BFQ schedules entities (which represent either per-process queues or
groups of queues) as a function of their timestamps. In particular, as
a function of their (virtual) finish times. The finish time of an
entity is computed as a function of the budget assigned to the entity,
assuming, tentatively, that the entity, once in service, will receive
an amount of service equal to its budget. Then, when the entity is
expired because it finishes to be served, this finish time is updated
as a function of the actual service received by the entity. This
allows the entity to be correctly charged with only the service
received, and then to be correctly re-scheduled.
Yet an entity may receive service also while not being the entity in
service (in the scheduling environment of its parent entity), for
several reasons. If the entity remains with no backlog while receiving
this 'unofficial' service, then it is expired. Also on such an
expiration, the finish time of the entity should be updated to account
for only the service actually received by the entity. Unfortunately,
such an update is not performed for an entity expiring without being
the entity in service.
In a similar vein, the service counter of the entity in service is
reset when the entity is expired, to be ready to be used for next
service cycle. This reset too should be performed also in case an
entity is expired because it remains empty after receiving service
while not being the entity in service. But in this case the reset is
not performed.
This commit performs the above update of the finish time and reset of
the service received, also for an entity expiring while not being the
entity in service.
Signed-off-by: Paolo Valente <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
block/bfq-wf2q.c | 13 ++++++++++---
1 file changed, 10 insertions(+), 3 deletions(-)
diff --git a/block/bfq-wf2q.c b/block/bfq-wf2q.c
index ae52bff43ce4..ff7c2d470bb8 100644
--- a/block/bfq-wf2q.c
+++ b/block/bfq-wf2q.c
@@ -1181,10 +1181,17 @@ bool __bfq_deactivate_entity(struct bfq_entity *entity, bool ins_into_idle_tree)
st = bfq_entity_service_tree(entity);
is_in_service = entity == sd->in_service_entity;
- if (is_in_service) {
- bfq_calc_finish(entity, entity->service);
+ bfq_calc_finish(entity, entity->service);
+
+ if (is_in_service)
sd->in_service_entity = NULL;
- }
+ else
+ /*
+ * Non in-service entity: nobody will take care of
+ * resetting its service counter on expiration. Do it
+ * now.
+ */
+ entity->service = 0;
if (entity->tree == &st->active)
bfq_active_extract(st, entity);
--
2.17.1
From: Yunsheng Lin <[email protected]>
[ Upstream commit 996ff91840eb6f288826e472685abde78bac20ea ]
The hardware expects a unit of 128 bytes when setting
packet buffer. When calculating the packet buffer size,
hclge_rx_buffer_calc does not round up the size as a unit
of 128 byte, which may casue packet lost problem when stress
testing.
This patch fixes it by rounding up packet size when calculating.
Fixes: 46a3df9f9718 ("net: hns3: Add HNS3 Acceleration Engine & Compatibility Layer Support")
Signed-off-by: Yunsheng Lin <[email protected]>
Signed-off-by: Peng Li <[email protected]>
Signed-off-by: Salil Mehta <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
.../ethernet/hisilicon/hns3/hns3pf/hclge_main.c | 14 ++++++++------
1 file changed, 8 insertions(+), 6 deletions(-)
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
index 8577dfc799ad..023910abc831 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
@@ -1657,11 +1657,13 @@ static int hclge_tx_buffer_calc(struct hclge_dev *hdev,
static int hclge_rx_buffer_calc(struct hclge_dev *hdev,
struct hclge_pkt_buf_alloc *buf_alloc)
{
- u32 rx_all = hdev->pkt_buf_size;
+#define HCLGE_BUF_SIZE_UNIT 128
+ u32 rx_all = hdev->pkt_buf_size, aligned_mps;
int no_pfc_priv_num, pfc_priv_num;
struct hclge_priv_buf *priv;
int i;
+ aligned_mps = round_up(hdev->mps, HCLGE_BUF_SIZE_UNIT);
rx_all -= hclge_get_tx_buff_alloced(buf_alloc);
/* When DCB is not supported, rx private
@@ -1680,13 +1682,13 @@ static int hclge_rx_buffer_calc(struct hclge_dev *hdev,
if (hdev->hw_tc_map & BIT(i)) {
priv->enable = 1;
if (hdev->tm_info.hw_pfc_map & BIT(i)) {
- priv->wl.low = hdev->mps;
- priv->wl.high = priv->wl.low + hdev->mps;
+ priv->wl.low = aligned_mps;
+ priv->wl.high = priv->wl.low + aligned_mps;
priv->buf_size = priv->wl.high +
HCLGE_DEFAULT_DV;
} else {
priv->wl.low = 0;
- priv->wl.high = 2 * hdev->mps;
+ priv->wl.high = 2 * aligned_mps;
priv->buf_size = priv->wl.high;
}
} else {
@@ -1718,11 +1720,11 @@ static int hclge_rx_buffer_calc(struct hclge_dev *hdev,
if (hdev->tm_info.hw_pfc_map & BIT(i)) {
priv->wl.low = 128;
- priv->wl.high = priv->wl.low + hdev->mps;
+ priv->wl.high = priv->wl.low + aligned_mps;
priv->buf_size = priv->wl.high + HCLGE_DEFAULT_DV;
} else {
priv->wl.low = 0;
- priv->wl.high = hdev->mps;
+ priv->wl.high = aligned_mps;
priv->buf_size = priv->wl.high;
}
}
--
2.17.1
From: Bruce Allan <[email protected]>
[ Upstream commit f934bb9b8b6136edd261b2dc2c9ad4dbc39ffc66 ]
rx_mini_pending was set to an incorrect value. This was causing EINVAL to
always be returned to 'ethtool -G'. The driver does not support mini or
jumbo rings so the respective settings should be zero.
Also, change the valid range of the number of descriptors in the rings to
make the code simpler and easier for users to understand (this removes the
valid settings of 8 and 16). Add a system log message indicating when the
number is rounded-up from what the user specifies with the 'ethtool -G'
command (i.e. when it is not a multiple of 32), and update the log message
when a user-provided value is out of range to also indicate the stride.
Signed-off-by: Bruce Allan <[email protected]>
Signed-off-by: Anirudh Venkataramanan <[email protected]>
Tested-by: Andrew Bowers <[email protected]>
Signed-off-by: Jeff Kirsher <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/intel/ice/ice.h | 4 ++--
drivers/net/ethernet/intel/ice/ice_ethtool.c | 17 ++++++++++++++---
2 files changed, 16 insertions(+), 5 deletions(-)
diff --git a/drivers/net/ethernet/intel/ice/ice.h b/drivers/net/ethernet/intel/ice/ice.h
index 868f4a1d0f72..67591722c625 100644
--- a/drivers/net/ethernet/intel/ice/ice.h
+++ b/drivers/net/ethernet/intel/ice/ice.h
@@ -39,9 +39,9 @@
extern const char ice_drv_ver[];
#define ICE_BAR0 0
#define ICE_DFLT_NUM_DESC 128
-#define ICE_MIN_NUM_DESC 8
-#define ICE_MAX_NUM_DESC 8160
#define ICE_REQ_DESC_MULTIPLE 32
+#define ICE_MIN_NUM_DESC ICE_REQ_DESC_MULTIPLE
+#define ICE_MAX_NUM_DESC 8160
#define ICE_DFLT_TRAFFIC_CLASS BIT(0)
#define ICE_INT_NAME_STR_LEN (IFNAMSIZ + 16)
#define ICE_ETHTOOL_FWVER_LEN 32
diff --git a/drivers/net/ethernet/intel/ice/ice_ethtool.c b/drivers/net/ethernet/intel/ice/ice_ethtool.c
index c71a9b528d6d..9d6754f65a1a 100644
--- a/drivers/net/ethernet/intel/ice/ice_ethtool.c
+++ b/drivers/net/ethernet/intel/ice/ice_ethtool.c
@@ -478,9 +478,11 @@ ice_get_ringparam(struct net_device *netdev, struct ethtool_ringparam *ring)
ring->tx_max_pending = ICE_MAX_NUM_DESC;
ring->rx_pending = vsi->rx_rings[0]->count;
ring->tx_pending = vsi->tx_rings[0]->count;
- ring->rx_mini_pending = ICE_MIN_NUM_DESC;
+
+ /* Rx mini and jumbo rings are not supported */
ring->rx_mini_max_pending = 0;
ring->rx_jumbo_max_pending = 0;
+ ring->rx_mini_pending = 0;
ring->rx_jumbo_pending = 0;
}
@@ -498,14 +500,23 @@ ice_set_ringparam(struct net_device *netdev, struct ethtool_ringparam *ring)
ring->tx_pending < ICE_MIN_NUM_DESC ||
ring->rx_pending > ICE_MAX_NUM_DESC ||
ring->rx_pending < ICE_MIN_NUM_DESC) {
- netdev_err(netdev, "Descriptors requested (Tx: %d / Rx: %d) out of range [%d-%d]\n",
+ netdev_err(netdev, "Descriptors requested (Tx: %d / Rx: %d) out of range [%d-%d] (increment %d)\n",
ring->tx_pending, ring->rx_pending,
- ICE_MIN_NUM_DESC, ICE_MAX_NUM_DESC);
+ ICE_MIN_NUM_DESC, ICE_MAX_NUM_DESC,
+ ICE_REQ_DESC_MULTIPLE);
return -EINVAL;
}
new_tx_cnt = ALIGN(ring->tx_pending, ICE_REQ_DESC_MULTIPLE);
+ if (new_tx_cnt != ring->tx_pending)
+ netdev_info(netdev,
+ "Requested Tx descriptor count rounded up to %d\n",
+ new_tx_cnt);
new_rx_cnt = ALIGN(ring->rx_pending, ICE_REQ_DESC_MULTIPLE);
+ if (new_rx_cnt != ring->rx_pending)
+ netdev_info(netdev,
+ "Requested Rx descriptor count rounded up to %d\n",
+ new_rx_cnt);
/* if nothing to do return success */
if (new_tx_cnt == vsi->tx_rings[0]->count &&
--
2.17.1
From: Will Deacon <[email protected]>
[ Upstream commit 22839869f21ab3850fbbac9b425ccc4c0023926f ]
The sigaltstack(2) system call fails with -ENOMEM if the new alternative
signal stack is found to be smaller than SIGMINSTKSZ. On architectures
such as arm64, where the native value for SIGMINSTKSZ is larger than
the compat value, this can result in an unexpected error being reported
to a compat task. See, for example:
https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=904385
This patch fixes the problem by extending do_sigaltstack to take the
minimum signal stack size as an additional parameter, allowing the
native and compat system call entry code to pass in their respective
values. COMPAT_SIGMINSTKSZ is just defined as SIGMINSTKSZ if it has not
been defined by the architecture.
Cc: Arnd Bergmann <[email protected]>
Cc: Dominik Brodowski <[email protected]>
Cc: "Eric W. Biederman" <[email protected]>
Cc: Andrew Morton <[email protected]>
Cc: Al Viro <[email protected]>
Cc: Oleg Nesterov <[email protected]>
Reported-by: Steve McIntyre <[email protected]>
Tested-by: Steve McIntyre <[email protected]>
Signed-off-by: Will Deacon <[email protected]>
Signed-off-by: Catalin Marinas <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
include/linux/compat.h | 3 +++
kernel/signal.c | 14 +++++++++-----
2 files changed, 12 insertions(+), 5 deletions(-)
diff --git a/include/linux/compat.h b/include/linux/compat.h
index 1a3c4f37e908..de0c13bdcd2c 100644
--- a/include/linux/compat.h
+++ b/include/linux/compat.h
@@ -103,6 +103,9 @@ typedef struct compat_sigaltstack {
compat_size_t ss_size;
} compat_stack_t;
#endif
+#ifndef COMPAT_MINSIGSTKSZ
+#define COMPAT_MINSIGSTKSZ MINSIGSTKSZ
+#endif
#define compat_jiffies_to_clock_t(x) \
(((unsigned long)(x) * COMPAT_USER_HZ) / HZ)
diff --git a/kernel/signal.c b/kernel/signal.c
index 5843c541fda9..e4aad0e90882 100644
--- a/kernel/signal.c
+++ b/kernel/signal.c
@@ -3460,7 +3460,8 @@ int do_sigaction(int sig, struct k_sigaction *act, struct k_sigaction *oact)
}
static int
-do_sigaltstack (const stack_t *ss, stack_t *oss, unsigned long sp)
+do_sigaltstack (const stack_t *ss, stack_t *oss, unsigned long sp,
+ size_t min_ss_size)
{
struct task_struct *t = current;
@@ -3490,7 +3491,7 @@ do_sigaltstack (const stack_t *ss, stack_t *oss, unsigned long sp)
ss_size = 0;
ss_sp = NULL;
} else {
- if (unlikely(ss_size < MINSIGSTKSZ))
+ if (unlikely(ss_size < min_ss_size))
return -ENOMEM;
}
@@ -3508,7 +3509,8 @@ SYSCALL_DEFINE2(sigaltstack,const stack_t __user *,uss, stack_t __user *,uoss)
if (uss && copy_from_user(&new, uss, sizeof(stack_t)))
return -EFAULT;
err = do_sigaltstack(uss ? &new : NULL, uoss ? &old : NULL,
- current_user_stack_pointer());
+ current_user_stack_pointer(),
+ MINSIGSTKSZ);
if (!err && uoss && copy_to_user(uoss, &old, sizeof(stack_t)))
err = -EFAULT;
return err;
@@ -3519,7 +3521,8 @@ int restore_altstack(const stack_t __user *uss)
stack_t new;
if (copy_from_user(&new, uss, sizeof(stack_t)))
return -EFAULT;
- (void)do_sigaltstack(&new, NULL, current_user_stack_pointer());
+ (void)do_sigaltstack(&new, NULL, current_user_stack_pointer(),
+ MINSIGSTKSZ);
/* squash all but EFAULT for now */
return 0;
}
@@ -3553,7 +3556,8 @@ static int do_compat_sigaltstack(const compat_stack_t __user *uss_ptr,
uss.ss_size = uss32.ss_size;
}
ret = do_sigaltstack(uss_ptr ? &uss : NULL, &uoss,
- compat_user_stack_pointer());
+ compat_user_stack_pointer(),
+ COMPAT_MINSIGSTKSZ);
if (ret >= 0 && uoss_ptr) {
compat_stack_t old;
memset(&old, 0, sizeof(old));
--
2.17.1
From: James Smart <[email protected]>
[ Upstream commit 783f4a4408e1251d17f333ad56abac24dde988b9 ]
When an io is rejected by nvmf_check_ready() due to validation of the
controller state, the nvmf_fail_nonready_command() will normally return
BLK_STS_RESOURCE to requeue and retry. However, if the controller is
dying or the I/O is marked for NVMe multipath, the I/O is failed so that
the controller can terminate or so that the io can be issued on a
different path. Unfortunately, as this reject point is before the
transport has accepted the command, blk-mq ends up completing the I/O
and never calls nvme_complete_rq(), which is where multipath may preserve
or re-route the I/O. The end result is, the device user ends up seeing an
EIO error.
Example: single path connectivity, controller is under load, and a reset
is induced. An I/O is received:
a) while the reset state has been set but the queues have yet to be
stopped; or
b) after queues are started (at end of reset) but before the reconnect
has completed.
The I/O finishes with an EIO status.
This patch makes the following changes:
- Adds the HOST_PATH_ERROR pathing status from TP4028
- Modifies the reject point such that it appears to queue successfully,
but actually completes the io with the new pathing status and calls
nvme_complete_rq().
- nvme_complete_rq() recognizes the new status, avoids resetting the
controller (likely was already done in order to get this new status),
and calls the multipather to clear the current path that errored.
This allows the next command (retry or new command) to select a new
path if there is one.
Signed-off-by: James Smart <[email protected]>
Reviewed-by: Sagi Grimberg <[email protected]>
Signed-off-by: Christoph Hellwig <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/nvme/host/fabrics.c | 7 +++++--
drivers/nvme/host/multipath.c | 7 +++++++
include/linux/nvme.h | 1 +
3 files changed, 13 insertions(+), 2 deletions(-)
diff --git a/drivers/nvme/host/fabrics.c b/drivers/nvme/host/fabrics.c
index 206d63cb1afc..bcd09d3a44da 100644
--- a/drivers/nvme/host/fabrics.c
+++ b/drivers/nvme/host/fabrics.c
@@ -552,8 +552,11 @@ blk_status_t nvmf_fail_nonready_command(struct nvme_ctrl *ctrl,
ctrl->state != NVME_CTRL_DEAD &&
!blk_noretry_request(rq) && !(rq->cmd_flags & REQ_NVME_MPATH))
return BLK_STS_RESOURCE;
- nvme_req(rq)->status = NVME_SC_ABORT_REQ;
- return BLK_STS_IOERR;
+
+ nvme_req(rq)->status = NVME_SC_HOST_PATH_ERROR;
+ blk_mq_start_request(rq);
+ nvme_complete_rq(rq);
+ return BLK_STS_OK;
}
EXPORT_SYMBOL_GPL(nvmf_fail_nonready_command);
diff --git a/drivers/nvme/host/multipath.c b/drivers/nvme/host/multipath.c
index 9fe3fff818b8..b71c9ad1bf45 100644
--- a/drivers/nvme/host/multipath.c
+++ b/drivers/nvme/host/multipath.c
@@ -77,6 +77,13 @@ void nvme_failover_req(struct request *req)
queue_work(nvme_wq, &ns->ctrl->ana_work);
}
break;
+ case NVME_SC_HOST_PATH_ERROR:
+ /*
+ * Temporary transport disruption in talking to the controller.
+ * Try to send on a new path.
+ */
+ nvme_mpath_clear_current_path(ns);
+ break;
default:
/*
* Reset the controller for any non-ANA error as we don't know
diff --git a/include/linux/nvme.h b/include/linux/nvme.h
index 68e91ef5494c..818dbe9331be 100644
--- a/include/linux/nvme.h
+++ b/include/linux/nvme.h
@@ -1241,6 +1241,7 @@ enum {
NVME_SC_ANA_PERSISTENT_LOSS = 0x301,
NVME_SC_ANA_INACCESSIBLE = 0x302,
NVME_SC_ANA_TRANSITION = 0x303,
+ NVME_SC_HOST_PATH_ERROR = 0x370,
NVME_SC_DNR = 0x4000,
};
--
2.17.1
From: Xiaochen Shen <[email protected]>
[ Upstream commit 2cc81c6992248ea37d0241bc325977bab310bc3b ]
In resctrl filesystem, mount options exist to enable L3/L2 CDP and MBA
Software Controller features if the platform supports them:
mount -t resctrl resctrl [-o cdp[,cdpl2][,mba_MBps]] /sys/fs/resctrl
But currently only "cdp" option is displayed in /proc/mounts. "cdpl2" and
"mba_MBps" options are not shown even when they are active.
Before:
# mount -t resctrl resctrl -o cdp,mba_MBps /sys/fs/resctrl
# grep resctrl /proc/mounts
/sys/fs/resctrl /sys/fs/resctrl resctrl rw,relatime,cdp 0 0
After:
# mount -t resctrl resctrl -o cdp,mba_MBps /sys/fs/resctrl
# grep resctrl /proc/mounts
/sys/fs/resctrl /sys/fs/resctrl resctrl rw,relatime,cdp,mba_MBps 0 0
Signed-off-by: Xiaochen Shen <[email protected]>
Signed-off-by: Fenghua Yu <[email protected]>
Signed-off-by: Thomas Gleixner <[email protected]>
Cc: "H Peter Anvin" <[email protected]>
Cc: "Tony Luck" <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
arch/x86/kernel/cpu/intel_rdt_rdtgroup.c | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/arch/x86/kernel/cpu/intel_rdt_rdtgroup.c b/arch/x86/kernel/cpu/intel_rdt_rdtgroup.c
index b140c68bc14b..643670fb8943 100644
--- a/arch/x86/kernel/cpu/intel_rdt_rdtgroup.c
+++ b/arch/x86/kernel/cpu/intel_rdt_rdtgroup.c
@@ -2805,6 +2805,13 @@ static int rdtgroup_show_options(struct seq_file *seq, struct kernfs_root *kf)
{
if (rdt_resources_all[RDT_RESOURCE_L3DATA].alloc_enabled)
seq_puts(seq, ",cdp");
+
+ if (rdt_resources_all[RDT_RESOURCE_L2DATA].alloc_enabled)
+ seq_puts(seq, ",cdpl2");
+
+ if (is_mba_sc(&rdt_resources_all[RDT_RESOURCE_MBA]))
+ seq_puts(seq, ",mba_MBps");
+
return 0;
}
--
2.17.1
From: Jian Shen <[email protected]>
[ Upstream commit 7a8101109dd37837f587cd56f3111d4fc17a07f5 ]
When nic down, it firstly calls netif_tx_stop_all_queues(), then calls
napi_disable(). But napi_disable() will wait current napi_poll finish,
it may call netif_tx_wake_queue(). This patch fixes it by add nic state
checking.
Fixes: 424eb834a9be ("net: hns3: Unified HNS3 {VF|PF} Ethernet Driver for hip08 SoC")
Signed-off-by: Jian Shen <[email protected]>
Signed-off-by: Peng Li <[email protected]>
Signed-off-by: Salil Mehta <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/hisilicon/hns3/hns3_enet.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c
index 955c4ab18b03..b7b2f8254ce1 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c
@@ -1915,6 +1915,7 @@ static int is_valid_clean_head(struct hns3_enet_ring *ring, int h)
bool hns3_clean_tx_ring(struct hns3_enet_ring *ring, int budget)
{
struct net_device *netdev = ring->tqp->handle->kinfo.netdev;
+ struct hns3_nic_priv *priv = netdev_priv(netdev);
struct netdev_queue *dev_queue;
int bytes, pkts;
int head;
@@ -1961,7 +1962,8 @@ bool hns3_clean_tx_ring(struct hns3_enet_ring *ring, int budget)
* sees the new next_to_clean.
*/
smp_mb();
- if (netif_tx_queue_stopped(dev_queue)) {
+ if (netif_tx_queue_stopped(dev_queue) &&
+ !test_bit(HNS3_NIC_STATE_DOWN, &priv->state)) {
netif_tx_wake_queue(dev_queue);
ring->stats.restart_queue++;
}
--
2.17.1
From: Viresh Kumar <[email protected]>
[ Upstream commit 51c99dd2c06b234575661fa1e0a1dea6c3ef566f ]
We can not call dev_pm_opp_of_cpumask_remove_table() freely anymore
since the latest OPP core updates as that uses reference counting to
free resources. There are cases where no static OPPs are added (using
DT) for a platform and trying to remove the OPP table may end up
decrementing refcount which is already zero and hence generating
warnings.
Lets track if we were able to add static OPPs or not and then only
remove the table based on that. Some reshuffling of code is also done to
do that.
Reported-by: Niklas Cassel <[email protected]>
Tested-by: Niklas Cassel <[email protected]>
Signed-off-by: Viresh Kumar <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/cpufreq/cpufreq-dt.c | 34 +++++++++++++++++++---------------
1 file changed, 19 insertions(+), 15 deletions(-)
diff --git a/drivers/cpufreq/cpufreq-dt.c b/drivers/cpufreq/cpufreq-dt.c
index 0a9ebf00be46..e58bfcb1169e 100644
--- a/drivers/cpufreq/cpufreq-dt.c
+++ b/drivers/cpufreq/cpufreq-dt.c
@@ -32,6 +32,7 @@ struct private_data {
struct device *cpu_dev;
struct thermal_cooling_device *cdev;
const char *reg_name;
+ bool have_static_opps;
};
static struct freq_attr *cpufreq_dt_attr[] = {
@@ -204,6 +205,15 @@ static int cpufreq_init(struct cpufreq_policy *policy)
}
}
+ priv = kzalloc(sizeof(*priv), GFP_KERNEL);
+ if (!priv) {
+ ret = -ENOMEM;
+ goto out_put_regulator;
+ }
+
+ priv->reg_name = name;
+ priv->opp_table = opp_table;
+
/*
* Initialize OPP tables for all policy->cpus. They will be shared by
* all CPUs which have marked their CPUs shared with OPP bindings.
@@ -214,7 +224,8 @@ static int cpufreq_init(struct cpufreq_policy *policy)
*
* OPPs might be populated at runtime, don't check for error here
*/
- dev_pm_opp_of_cpumask_add_table(policy->cpus);
+ if (!dev_pm_opp_of_cpumask_add_table(policy->cpus))
+ priv->have_static_opps = true;
/*
* But we need OPP table to function so if it is not there let's
@@ -240,19 +251,10 @@ static int cpufreq_init(struct cpufreq_policy *policy)
__func__, ret);
}
- priv = kzalloc(sizeof(*priv), GFP_KERNEL);
- if (!priv) {
- ret = -ENOMEM;
- goto out_free_opp;
- }
-
- priv->reg_name = name;
- priv->opp_table = opp_table;
-
ret = dev_pm_opp_init_cpufreq_table(cpu_dev, &freq_table);
if (ret) {
dev_err(cpu_dev, "failed to init cpufreq table: %d\n", ret);
- goto out_free_priv;
+ goto out_free_opp;
}
priv->cpu_dev = cpu_dev;
@@ -282,10 +284,11 @@ static int cpufreq_init(struct cpufreq_policy *policy)
out_free_cpufreq_table:
dev_pm_opp_free_cpufreq_table(cpu_dev, &freq_table);
-out_free_priv:
- kfree(priv);
out_free_opp:
- dev_pm_opp_of_cpumask_remove_table(policy->cpus);
+ if (priv->have_static_opps)
+ dev_pm_opp_of_cpumask_remove_table(policy->cpus);
+ kfree(priv);
+out_put_regulator:
if (name)
dev_pm_opp_put_regulators(opp_table);
out_put_clk:
@@ -300,7 +303,8 @@ static int cpufreq_exit(struct cpufreq_policy *policy)
cpufreq_cooling_unregister(priv->cdev);
dev_pm_opp_free_cpufreq_table(priv->cpu_dev, &policy->freq_table);
- dev_pm_opp_of_cpumask_remove_table(policy->related_cpus);
+ if (priv->have_static_opps)
+ dev_pm_opp_of_cpumask_remove_table(policy->related_cpus);
if (priv->reg_name)
dev_pm_opp_put_regulators(priv->opp_table);
--
2.17.1
From: Lubomir Rintel <[email protected]>
[ Upstream commit d92116b800fb79a72ad26121f5011f6aa3ad94c2 ]
On OLPC XO-1, the RTC is discovered via device tree from the arch
initcall. Don't let the PC platform register another one from its device
initcall, it's not going to work:
sysfs: cannot create duplicate filename '/devices/platform/rtc_cmos'
CPU: 0 PID: 1 Comm: swapper Not tainted 4.19.0-rc6 #12
Hardware name: OLPC XO/XO, BIOS OLPC Ver 1.00.01 06/11/2014
Call Trace:
dump_stack+0x16/0x18
sysfs_warn_dup+0x46/0x58
sysfs_create_dir_ns+0x76/0x9b
kobject_add_internal+0xed/0x209
? __schedule+0x3fa/0x447
kobject_add+0x5b/0x66
device_add+0x298/0x535
? insert_resource_conflict+0x2a/0x3e
platform_device_add+0x14d/0x192
? io_delay_init+0x19/0x19
platform_device_register+0x1c/0x1f
add_rtc_cmos+0x16/0x31
do_one_initcall+0x78/0x14a
? do_early_param+0x75/0x75
kernel_init_freeable+0x152/0x1e0
? rest_init+0xa2/0xa2
kernel_init+0x8/0xd5
ret_from_fork+0x2e/0x38
kobject_add_internal failed for rtc_cmos with -EEXIST, don't try to
register things with the same name in the same directory.
platform rtc_cmos: registered platform RTC device (no PNP device found)
Signed-off-by: Lubomir Rintel <[email protected]>
Signed-off-by: Borislav Petkov <[email protected]>
Acked-by: Thomas Gleixner <[email protected]>
CC: "H. Peter Anvin" <[email protected]>
CC: Ingo Molnar <[email protected]>
CC: x86-ml <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
arch/x86/platform/olpc/olpc-xo1-rtc.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/arch/x86/platform/olpc/olpc-xo1-rtc.c b/arch/x86/platform/olpc/olpc-xo1-rtc.c
index a2b4efddd61a..8e7ddd7e313a 100644
--- a/arch/x86/platform/olpc/olpc-xo1-rtc.c
+++ b/arch/x86/platform/olpc/olpc-xo1-rtc.c
@@ -16,6 +16,7 @@
#include <asm/msr.h>
#include <asm/olpc.h>
+#include <asm/x86_init.h>
static void rtc_wake_on(struct device *dev)
{
@@ -75,6 +76,8 @@ static int __init xo1_rtc_init(void)
if (r)
return r;
+ x86_platform.legacy.rtc = 0;
+
device_init_wakeup(&xo1_rtc_device.dev, 1);
return 0;
}
--
2.17.1
From: Christian Hewitt <[email protected]>
[ Upstream commit a357ea098c9605f60d92a66a9073f56ce25726da ]
This patch adds the device ID for the AMPAK AP6335 combo module used
in the 1st generation WeTek Hub Android/LibreELEC HTPC box. The WiFI
chip identifies itself as BCM4339, while Bluetooth identifies itself
as BCM4335 (rev C0):
```
[ 4.864248] Bluetooth: hci0: BCM: chip id 86
[ 4.866388] Bluetooth: hci0: BCM: features 0x2f
[ 4.889317] Bluetooth: hci0: BCM4335C0
[ 4.889332] Bluetooth: hci0: BCM4335C0 (003.001.009) build 0000
[ 9.778383] Bluetooth: hci0: BCM4335C0 (003.001.009) build 0268
```
Output from hciconfig:
```
hci0: Type: Primary Bus: UART
BD Address: 43:39:00:00:1F:AC ACL MTU: 1021:8 SCO MTU: 64:1
UP RUNNING
RX bytes:7567 acl:234 sco:0 events:386 errors:0
TX bytes:53844 acl:77 sco:0 commands:304 errors:0
Features: 0xbf 0xfe 0xcf 0xfe 0xdb 0xff 0x7b 0x87
Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3
Link policy: RSWITCH SNIFF
Link mode: SLAVE ACCEPT
Name: 'HUB'
Class: 0x0c0000
Service Classes: Rendering, Capturing
Device Class: Miscellaneous,
HCI Version: 4.0 (0x6) Revision: 0x10c
LMP Version: 4.0 (0x6) Subversion: 0x6109
Manufacturer: Broadcom Corporation (15)
```
Signed-off-by: Christian Hewitt <[email protected]>
Signed-off-by: Marcel Holtmann <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/bluetooth/btbcm.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/bluetooth/btbcm.c b/drivers/bluetooth/btbcm.c
index 99cde1f9467d..e3e4d929e74f 100644
--- a/drivers/bluetooth/btbcm.c
+++ b/drivers/bluetooth/btbcm.c
@@ -324,6 +324,7 @@ static const struct bcm_subver_table bcm_uart_subver_table[] = {
{ 0x4103, "BCM4330B1" }, /* 002.001.003 */
{ 0x410e, "BCM43341B0" }, /* 002.001.014 */
{ 0x4406, "BCM4324B3" }, /* 002.004.006 */
+ { 0x6109, "BCM4335C0" }, /* 003.001.009 */
{ 0x610c, "BCM4354" }, /* 003.001.012 */
{ 0x2122, "BCM4343A0" }, /* 001.001.034 */
{ 0x2209, "BCM43430A1" }, /* 001.002.009 */
--
2.17.1
From: Jeffrey Hugo <[email protected]>
[ Upstream commit 59bbff3775c0951300f7b41345a54b999438f8d0 ]
The type of a cache might not be specified by architectural mechanisms (ie
system registers), but its type might be specified in the PPTT. In this
case, we should populate the type of the cache, rather than leave it
undefined.
This fixes the issue where the cacheinfo driver will not populate sysfs
for such caches, resulting in the information missing from utilities like
lstopo and lscpu, thus degrading the user experience.
Fixes: 2bd00bcd73e5 (ACPI/PPTT: Add Processor Properties Topology Table parsing)
Reported-by: Vijaya Kumar K <[email protected]>
Signed-off-by: Jeffrey Hugo <[email protected]>
Reviewed-by: Sudeep Holla <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/acpi/pptt.c | 33 +++++++++++++--------------------
1 file changed, 13 insertions(+), 20 deletions(-)
diff --git a/drivers/acpi/pptt.c b/drivers/acpi/pptt.c
index d1e26cb599bf..da031b1df6f5 100644
--- a/drivers/acpi/pptt.c
+++ b/drivers/acpi/pptt.c
@@ -338,9 +338,6 @@ static struct acpi_pptt_cache *acpi_find_cache_node(struct acpi_table_header *ta
return found;
}
-/* total number of attributes checked by the properties code */
-#define PPTT_CHECKED_ATTRIBUTES 4
-
/**
* update_cache_properties() - Update cacheinfo for the given processor
* @this_leaf: Kernel cache info structure being updated
@@ -357,25 +354,15 @@ static void update_cache_properties(struct cacheinfo *this_leaf,
struct acpi_pptt_cache *found_cache,
struct acpi_pptt_processor *cpu_node)
{
- int valid_flags = 0;
-
this_leaf->fw_token = cpu_node;
- if (found_cache->flags & ACPI_PPTT_SIZE_PROPERTY_VALID) {
+ if (found_cache->flags & ACPI_PPTT_SIZE_PROPERTY_VALID)
this_leaf->size = found_cache->size;
- valid_flags++;
- }
- if (found_cache->flags & ACPI_PPTT_LINE_SIZE_VALID) {
+ if (found_cache->flags & ACPI_PPTT_LINE_SIZE_VALID)
this_leaf->coherency_line_size = found_cache->line_size;
- valid_flags++;
- }
- if (found_cache->flags & ACPI_PPTT_NUMBER_OF_SETS_VALID) {
+ if (found_cache->flags & ACPI_PPTT_NUMBER_OF_SETS_VALID)
this_leaf->number_of_sets = found_cache->number_of_sets;
- valid_flags++;
- }
- if (found_cache->flags & ACPI_PPTT_ASSOCIATIVITY_VALID) {
+ if (found_cache->flags & ACPI_PPTT_ASSOCIATIVITY_VALID)
this_leaf->ways_of_associativity = found_cache->associativity;
- valid_flags++;
- }
if (found_cache->flags & ACPI_PPTT_WRITE_POLICY_VALID) {
switch (found_cache->attributes & ACPI_PPTT_MASK_WRITE_POLICY) {
case ACPI_PPTT_CACHE_POLICY_WT:
@@ -402,11 +389,17 @@ static void update_cache_properties(struct cacheinfo *this_leaf,
}
}
/*
- * If the above flags are valid, and the cache type is NOCACHE
- * update the cache type as well.
+ * If cache type is NOCACHE, then the cache hasn't been specified
+ * via other mechanisms. Update the type if a cache type has been
+ * provided.
+ *
+ * Note, we assume such caches are unified based on conventional system
+ * design and known examples. Significant work is required elsewhere to
+ * fully support data/instruction only type caches which are only
+ * specified in PPTT.
*/
if (this_leaf->type == CACHE_TYPE_NOCACHE &&
- valid_flags == PPTT_CHECKED_ATTRIBUTES)
+ found_cache->flags & ACPI_PPTT_CACHE_TYPE_VALID)
this_leaf->type = CACHE_TYPE_UNIFIED;
}
--
2.17.1
From: Balakrishna Godavarthi <[email protected]>
[ Upstream commit c2d7827338618a9e73a3f892ca63d9082bb7a94d ]
When flag KASAN is set, we are seeing an following crash while removing
hci_uart module.
[ 50.589909] Unable to handle kernel paging request at virtual address 6b6b6b6b6b6b73
[ 50.597902] Mem abort info:
[ 50.600846] Exception class = DABT (current EL), IL = 32 bits
[ 50.606959] SET = 0, FnV = 0
[ 50.610142] EA = 0, S1PTW = 0
[ 50.613396] Data abort info:
[ 50.616401] ISV = 0, ISS = 0x00000004
[ 50.620373] CM = 0, WnR = 0
[ 50.623466] [006b6b6b6b6b6b73] address between user and kernel address ranges
[ 50.630818] Internal error: Oops: 96000004 [#1] PREEMPT SMP
[ 50.671670] PC is at qca_power_shutdown+0x28/0x100 [hci_uart]
[ 50.677593] LR is at qca_close+0x74/0xb0 [hci_uart]
[ 50.775689] Process rmmod (pid: 2144, stack limit = 0xffffff801ba90000)
[ 50.782493] Call trace:
[ 50.872150] [<ffffff8000c3c81c>] qca_power_shutdown+0x28/0x100 [hci_uart]
[ 50.879138] [<ffffff8000c3c968>] qca_close+0x74/0xb0 [hci_uart]
[ 50.885238] [<ffffff8000c3a71c>] hci_uart_unregister_device+0x44/0x50 [hci_uart]
[ 50.892846] [<ffffff8000c3c9f4>] qca_serdev_remove+0x50/0x5c [hci_uart]
[ 50.899654] [<ffffff800844f630>] serdev_drv_remove+0x28/0x38
[ 50.905489] [<ffffff800850fc44>] device_release_driver_internal+0x140/0x1e4
[ 50.912653] [<ffffff800850fd94>] driver_detach+0x78/0x84
[ 50.918121] [<ffffff800850edac>] bus_remove_driver+0x80/0xa8
[ 50.923942] [<ffffff80085107dc>] driver_unregister+0x4c/0x58
[ 50.929768] [<ffffff8000c3ca8c>] qca_deinit+0x24/0x598 [hci_uart]
[ 50.936045] [<ffffff8000c3ca10>] hci_uart_exit+0x10/0x48 [hci_uart]
[ 50.942495] [<ffffff8008136630>] SyS_delete_module+0x17c/0x224
This crash is due to dereference of hdev, after freeing it.
Signed-off-by: Balakrishna Godavarthi <[email protected]>
Signed-off-by: Marcel Holtmann <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/bluetooth/hci_qca.c | 15 +++++++++------
1 file changed, 9 insertions(+), 6 deletions(-)
diff --git a/drivers/bluetooth/hci_qca.c b/drivers/bluetooth/hci_qca.c
index 2fee65886d50..f0d593c3fa72 100644
--- a/drivers/bluetooth/hci_qca.c
+++ b/drivers/bluetooth/hci_qca.c
@@ -167,7 +167,7 @@ struct qca_serdev {
};
static int qca_power_setup(struct hci_uart *hu, bool on);
-static void qca_power_shutdown(struct hci_dev *hdev);
+static void qca_power_shutdown(struct hci_uart *hu);
static void __serial_clock_on(struct tty_struct *tty)
{
@@ -609,7 +609,7 @@ static int qca_close(struct hci_uart *hu)
if (hu->serdev) {
qcadev = serdev_device_get_drvdata(hu->serdev);
if (qcadev->btsoc_type == QCA_WCN3990)
- qca_power_shutdown(hu->hdev);
+ qca_power_shutdown(hu);
else
gpiod_set_value_cansleep(qcadev->bt_en, 0);
@@ -1232,12 +1232,15 @@ static const struct qca_vreg_data qca_soc_data = {
.num_vregs = 4,
};
-static void qca_power_shutdown(struct hci_dev *hdev)
+static void qca_power_shutdown(struct hci_uart *hu)
{
- struct hci_uart *hu = hci_get_drvdata(hdev);
+ struct serdev_device *serdev = hu->serdev;
+ unsigned char cmd = QCA_WCN3990_POWEROFF_PULSE;
host_set_baudrate(hu, 2400);
- qca_send_power_pulse(hdev, QCA_WCN3990_POWEROFF_PULSE);
+ hci_uart_set_flow_control(hu, true);
+ serdev_device_write_buf(serdev, &cmd, sizeof(cmd));
+ hci_uart_set_flow_control(hu, false);
qca_power_setup(hu, false);
}
@@ -1413,7 +1416,7 @@ static void qca_serdev_remove(struct serdev_device *serdev)
struct qca_serdev *qcadev = serdev_device_get_drvdata(serdev);
if (qcadev->btsoc_type == QCA_WCN3990)
- qca_power_shutdown(qcadev->serdev_hu.hdev);
+ qca_power_shutdown(&qcadev->serdev_hu);
else
clk_disable_unprepare(qcadev->susclk);
--
2.17.1
From: Jacob Keller <[email protected]>
[ Upstream commit 396fbf9cab5dc07f8f87773062a8d35f54b40a05 ]
We have MAX_FW_API_VER_BRANCH, MAX_FW_API_VER_MAJOR, and
MAX_FW_API_VER_MINOR that we use in ice_controlq.h to test when a
firmware version is newer than expected. This is currently tested by
comparing each field separately. Thus, we compare the branch field
against the MAX_FW_API_VER_BRANCH, and so forth.
This means that currently, if we suppose that the max firmware version
is defined as 0.2.1, i.e.
Then firmware 0.1.3 will fail to load. This is because the minor version
3 is greater than the max minor version 1.
This is not intuitive, because of the notion that increasing the major
firmware version to 2 should mean any firmware version with a major
version is less than 2 should be considered older than 2...
In order to allow both 0.2.1 and 0.1.3 to load, you would have to define
the "max" firmware version as 0.2.3.. It is possible that such
a firmware version doesn't even exist yet!
Fix this by replacing the current logic with an updated check that
behaves as follows:
First, we check the major version. If it is greater than the expected
version, then we prevent driver load. Additionally, a warning message is
logged to indicate to the system administrator that they need to update
their driver. This is now the only case where the driver will refuse to
load.
Second, if the major version is less than the expected version, we log
an information message indicating the NVM should be updated.
Third, if the major version is exact, we'll then check the minor
version. If the minor version is more than two versions less than
expected, we log an information message indicating the NVM should be
updated. If it is more than two versions greater than the expected
version, we log an information message that the driver should be
updated.
To support this, the ice_aq_ver_check function needs its signature
updated to pass the HW structure. Since we now pass this structure,
there is no need to pass the firmware API versions separately.
Signed-off-by: Jacob Keller <[email protected]>
Signed-off-by: Anirudh Venkataramanan <[email protected]>
Tested-by: Andrew Bowers <[email protected]>
Signed-off-by: Jeff Kirsher <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/intel/ice/ice_controlq.c | 30 ++++++++++++-------
1 file changed, 19 insertions(+), 11 deletions(-)
diff --git a/drivers/net/ethernet/intel/ice/ice_controlq.c b/drivers/net/ethernet/intel/ice/ice_controlq.c
index 62be72fdc8f3..e783976c401d 100644
--- a/drivers/net/ethernet/intel/ice/ice_controlq.c
+++ b/drivers/net/ethernet/intel/ice/ice_controlq.c
@@ -518,22 +518,31 @@ ice_shutdown_sq(struct ice_hw *hw, struct ice_ctl_q_info *cq)
/**
* ice_aq_ver_check - Check the reported AQ API version.
- * @fw_branch: The "branch" of FW, typically describes the device type
- * @fw_major: The major version of the FW API
- * @fw_minor: The minor version increment of the FW API
+ * @hw: pointer to the hardware structure
*
* Checks if the driver should load on a given AQ API version.
*
* Return: 'true' iff the driver should attempt to load. 'false' otherwise.
*/
-static bool ice_aq_ver_check(u8 fw_branch, u8 fw_major, u8 fw_minor)
+static bool ice_aq_ver_check(struct ice_hw *hw)
{
- if (fw_branch != EXP_FW_API_VER_BRANCH)
- return false;
- if (fw_major != EXP_FW_API_VER_MAJOR)
- return false;
- if (fw_minor != EXP_FW_API_VER_MINOR)
+ if (hw->api_maj_ver > EXP_FW_API_VER_MAJOR) {
+ /* Major API version is newer than expected, don't load */
+ dev_warn(ice_hw_to_dev(hw),
+ "The driver for the device stopped because the NVM image is newer than expected. You must install the most recent version of the network driver.\n");
return false;
+ } else if (hw->api_maj_ver == EXP_FW_API_VER_MAJOR) {
+ if (hw->api_min_ver > (EXP_FW_API_VER_MINOR + 2))
+ dev_info(ice_hw_to_dev(hw),
+ "The driver for the device detected a newer version of the NVM image than expected. Please install the most recent version of the network driver.\n");
+ else if ((hw->api_min_ver + 2) < EXP_FW_API_VER_MINOR)
+ dev_info(ice_hw_to_dev(hw),
+ "The driver for the device detected an older version of the NVM image than expected. Please update the NVM image.\n");
+ } else {
+ /* Major API version is older than expected, log a warning */
+ dev_info(ice_hw_to_dev(hw),
+ "The driver for the device detected an older version of the NVM image than expected. Please update the NVM image.\n");
+ }
return true;
}
@@ -588,8 +597,7 @@ static enum ice_status ice_init_check_adminq(struct ice_hw *hw)
if (status)
goto init_ctrlq_free_rq;
- if (!ice_aq_ver_check(hw->api_branch, hw->api_maj_ver,
- hw->api_min_ver)) {
+ if (!ice_aq_ver_check(hw)) {
status = ICE_ERR_FW_API_VER;
goto init_ctrlq_free_rq;
}
--
2.17.1
From: Luca Coelho <[email protected]>
[ Upstream commit 2e1976bb75263fbad918e82184b16a23bd721546 ]
When reading the profiles from the EWRD table in ACPI, we loop over
the data and set it into our internal table. We use the number of
profiles specified in ACPI without checking its validity, so if the
ACPI table is corrupted and the number is larger than our array size,
we will try to make an out-of-bounds access.
Fix this by making sure the value specified in the ACPI table is
valid.
Fixes: 6996490501ed ("iwlwifi: mvm: add support for EWRD (Dynamic SAR) ACPI table")
Signed-off-by: Luca Coelho <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/intel/iwlwifi/mvm/fw.c | 8 ++++++--
1 file changed, 6 insertions(+), 2 deletions(-)
diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/fw.c b/drivers/net/wireless/intel/iwlwifi/mvm/fw.c
index 6bb1a99a197a..48a3611d6a31 100644
--- a/drivers/net/wireless/intel/iwlwifi/mvm/fw.c
+++ b/drivers/net/wireless/intel/iwlwifi/mvm/fw.c
@@ -704,8 +704,12 @@ static int iwl_mvm_sar_get_ewrd_table(struct iwl_mvm *mvm)
enabled = !!(wifi_pkg->package.elements[1].integer.value);
n_profiles = wifi_pkg->package.elements[2].integer.value;
- /* in case of BIOS bug */
- if (n_profiles <= 0) {
+ /*
+ * Check the validity of n_profiles. The EWRD profiles start
+ * from index 1, so the maximum value allowed here is
+ * ACPI_SAR_PROFILES_NUM - 1.
+ */
+ if (n_profiles <= 0 || n_profiles >= ACPI_SAR_PROFILE_NUM) {
ret = -EINVAL;
goto out_free;
}
--
2.17.1
From: Emmanuel Grumbach <[email protected]>
[ Upstream commit 155f7e0441cd121b1e673d465a35e99f4b9b2f0b ]
Fix a bug that happens in the following scenario:
1) suspend without WoWLAN
2) mac80211 calls drv_stop because of the suspend
3) __iwl_mvm_mac_stop deallocates the aux station
4) during drv_stop the firmware crashes
5) iwlmvm:
* sets IWL_MVM_STATUS_HW_RESTART_REQUESTED
* asks mac80211 to kick the restart flow
6) mac80211 puts the restart worker into a freezable
queue which means that the worker will not run for now
since the workqueue is already frozen
7) ...
8) resume
9) mac80211 runs ieee80211_reconfig as part of the resume
10) mac80211 detects that a restart flow has been requested
and that we are now resuming from suspend and cancels
the restart worker
11) mac80211 calls drv_start()
12) __iwl_mvm_mac_start checks that IWL_MVM_STATUS_HW_RESTART_REQUESTED
clears it, sets IWL_MVM_STATUS_IN_HW_RESTART and calls
iwl_mvm_restart_cleanup()
13) iwl_fw_error_dump gets called and accesses the device
to get debug data
14) iwl_mvm_up adds the aux station
15) iwl_mvm_add_aux_sta() allocates an internal station for
the aux station
16) iwl_mvm_allocate_int_sta() tests IWL_MVM_STATUS_IN_HW_RESTART
and doesn't really allocate a station ID for the aux
station
17) a new queue is added for the aux station
Note that steps from 5 to 9 aren't really part of the
problem but were described for the sake of completeness.
Once the iwl_mvm_mac_stop() is called, the device is not
accessible, meaning that step 12) can't succeed and we'll
see the following:
drivers/net/wireless/intel/iwlwifi/pcie/trans.c:2122 iwl_trans_pcie_grab_nic_access+0xc0/0x1d6 [iwlwifi]()
Timeout waiting for hardware access (CSR_GP_CNTRL 0x080403d8)
Call Trace:
[<ffffffffc03e6ad3>] iwl_trans_pcie_grab_nic_access+0xc0/0x1d6 [iwlwifi]
[<ffffffffc03e6a13>] iwl_trans_pcie_dump_regs+0x3fd/0x3fd [iwlwifi]
[<ffffffffc03dad42>] iwl_fw_error_dump+0x4f5/0xe8b [iwlwifi]
[<ffffffffc04bd43e>] __iwl_mvm_mac_start+0x5a/0x21a [iwlmvm]
[<ffffffffc04bd6d2>] iwl_mvm_mac_start+0xd4/0x103 [iwlmvm]
[<ffffffffc042d378>] drv_start+0xa1/0xc5 [iwl7000_mac80211]
[<ffffffffc045a339>] ieee80211_reconfig+0x145/0xf50 [mac80211]
[<ffffffffc044788b>] ieee80211_resume+0x62/0x66 [mac80211]
[<ffffffffc0366c5b>] wiphy_resume+0xa9/0xc6 [cfg80211]
The station id of the aux station is set to 0xff in step 3
and because we don't really allocate a new station id for
the auxliary station (as explained in 16), we end up sending
a command to the firmware asking to connect the queue
to station id 0xff. This makes the firmware crash with the
following information:
0x00002093 | ADVANCED_SYSASSERT
0x000002F0 | trm_hw_status0
0x00000000 | trm_hw_status1
0x00000B38 | branchlink2
0x0001978C | interruptlink1
0x00000000 | interruptlink2
0xFF080501 | data1
0xDEADBEEF | data2
0xDEADBEEF | data3
Firmware error during reconfiguration - reprobe!
FW error in SYNC CMD SCD_QUEUE_CFG
Fix this by clearing IWL_MVM_STATUS_HW_RESTART_REQUESTED
in iwl_mvm_mac_stop(). We won't be able to collect debug
data anyway and when we will brought up again, we will
have a clean state from the firmware perspective.
Since we won't have IWL_MVM_STATUS_IN_HW_RESTART set in
step 12) we won't get to the 2093 ASSERT either.
Fixes: bf8b286f86fc ("iwlwifi: mvm: defer setting IWL_MVM_STATUS_IN_HW_RESTART")
Signed-off-by: Emmanuel Grumbach <[email protected]>
Signed-off-by: Luca Coelho <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c | 9 ++++++---
1 file changed, 6 insertions(+), 3 deletions(-)
diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c b/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c
index b15b0d84bb7e..155cc2ac0120 100644
--- a/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c
+++ b/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c
@@ -1233,12 +1233,15 @@ void __iwl_mvm_mac_stop(struct iwl_mvm *mvm)
iwl_mvm_del_aux_sta(mvm);
/*
- * Clear IN_HW_RESTART flag when stopping the hw (as restart_complete()
- * won't be called in this case).
+ * Clear IN_HW_RESTART and HW_RESTART_REQUESTED flag when stopping the
+ * hw (as restart_complete() won't be called in this case) and mac80211
+ * won't execute the restart.
* But make sure to cleanup interfaces that have gone down before/during
* HW restart was requested.
*/
- if (test_and_clear_bit(IWL_MVM_STATUS_IN_HW_RESTART, &mvm->status))
+ if (test_and_clear_bit(IWL_MVM_STATUS_IN_HW_RESTART, &mvm->status) ||
+ test_and_clear_bit(IWL_MVM_STATUS_HW_RESTART_REQUESTED,
+ &mvm->status))
ieee80211_iterate_interfaces(mvm->hw, 0,
iwl_mvm_cleanup_iterator, mvm);
--
2.17.1
From: Tony Lindgren <[email protected]>
[ Upstream commit 4e651bad848955d88b29a568bfbfb4b831270e16 ]
We do not currently clear wl->elp_compl on ELP timeout and we have bogus
lingering pointer that wlcore_irq then will try to access after recovery
is done:
BUG: spinlock bad magic on CPU#1, irq/255-wl12xx/580
...
(spin_dump) from [<c01b9344>] (do_raw_spin_lock+0xc8/0x124)
(do_raw_spin_lock) from [<c09b3970>] (_raw_spin_lock_irqsave+0x68/0x74)
(_raw_spin_lock_irqsave) from [<c01a02f0>] (complete+0x24/0x58)
(complete) from [<bf572610>] (wlcore_irq+0x48/0x17c [wlcore])
(wlcore_irq [wlcore]) from [<c01c5efc>] (irq_thread_fn+0x2c/0x64)
(irq_thread_fn) from [<c01c623c>] (irq_thread+0x148/0x290)
(irq_thread) from [<c016b4b0>] (kthread+0x160/0x17c)
(kthread) from [<c01010b4>] (ret_from_fork+0x14/0x20)
...
After that the system will hang. Let's fix this by adding a flag for
recovery and moving the recovery work call to to the error handling
section.
And we want to set WL1271_FLAG_INTENDED_FW_RECOVERY and actually clear
it too in wl1271_recovery_work() and just downgrade the error to a
warning to prevent overly verbose output.
Cc: Eyal Reizer <[email protected]>
Signed-off-by: Tony Lindgren <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/ti/wlcore/main.c | 18 ++++++++++++++----
1 file changed, 14 insertions(+), 4 deletions(-)
diff --git a/drivers/net/wireless/ti/wlcore/main.c b/drivers/net/wireless/ti/wlcore/main.c
index 89b0d0fade9f..19e3c5a0b715 100644
--- a/drivers/net/wireless/ti/wlcore/main.c
+++ b/drivers/net/wireless/ti/wlcore/main.c
@@ -957,6 +957,8 @@ static void wl1271_recovery_work(struct work_struct *work)
BUG_ON(wl->conf.recovery.bug_on_recovery &&
!test_bit(WL1271_FLAG_INTENDED_FW_RECOVERY, &wl->flags));
+ clear_bit(WL1271_FLAG_INTENDED_FW_RECOVERY, &wl->flags);
+
if (wl->conf.recovery.no_recovery) {
wl1271_info("No recovery (chosen on module load). Fw will remain stuck.");
goto out_unlock;
@@ -6710,6 +6712,7 @@ static int __maybe_unused wlcore_runtime_resume(struct device *dev)
int ret;
unsigned long start_time = jiffies;
bool pending = false;
+ bool recovery = false;
/* Nothing to do if no ELP mode requested */
if (!test_bit(WL1271_FLAG_IN_ELP, &wl->flags))
@@ -6726,7 +6729,7 @@ static int __maybe_unused wlcore_runtime_resume(struct device *dev)
ret = wlcore_raw_write32(wl, HW_ACCESS_ELP_CTRL_REG, ELPCTRL_WAKE_UP);
if (ret < 0) {
- wl12xx_queue_recovery_work(wl);
+ recovery = true;
goto err;
}
@@ -6734,11 +6737,12 @@ static int __maybe_unused wlcore_runtime_resume(struct device *dev)
ret = wait_for_completion_timeout(&compl,
msecs_to_jiffies(WL1271_WAKEUP_TIMEOUT));
if (ret == 0) {
- wl1271_error("ELP wakeup timeout!");
- wl12xx_queue_recovery_work(wl);
+ wl1271_warning("ELP wakeup timeout!");
/* Return no error for runtime PM for recovery */
- return 0;
+ ret = 0;
+ recovery = true;
+ goto err;
}
}
@@ -6753,6 +6757,12 @@ static int __maybe_unused wlcore_runtime_resume(struct device *dev)
spin_lock_irqsave(&wl->wl_lock, flags);
wl->elp_compl = NULL;
spin_unlock_irqrestore(&wl->wl_lock, flags);
+
+ if (recovery) {
+ set_bit(WL1271_FLAG_INTENDED_FW_RECOVERY, &wl->flags);
+ wl12xx_queue_recovery_work(wl);
+ }
+
return ret;
}
--
2.17.1
From: Ben Peddell <[email protected]>
[ Upstream commit 7567c2a2ad9e80a2ce977eef535e64b61899633e ]
Forgot to include the maintainers with my first email.
Somewhere between Michael Lyle's original
"bcache: PI controller for writeback rate V2" patch dated 07 Sep 2017
and 1d316e6 bcache: implement PI controller for writeback rate,
the mapping of the writeback_rate_minimum attribute was dropped.
Re-add the missing sysfs writeback_rate_minimum attribute mapping to
"allow the user to specify a minimum rate at which dirty blocks are
retired."
Fixes: 1d316e6 ("bcache: implement PI controller for writeback rate")
Signed-off-by: Ben Peddell <[email protected]>
Signed-off-by: Coly Li <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/md/bcache/sysfs.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/md/bcache/sysfs.c b/drivers/md/bcache/sysfs.c
index 150cf4f4cf74..26f035a0c5b9 100644
--- a/drivers/md/bcache/sysfs.c
+++ b/drivers/md/bcache/sysfs.c
@@ -285,6 +285,7 @@ STORE(__cached_dev)
1, WRITEBACK_RATE_UPDATE_SECS_MAX);
d_strtoul(writeback_rate_i_term_inverse);
d_strtoul_nonzero(writeback_rate_p_term_inverse);
+ d_strtoul_nonzero(writeback_rate_minimum);
sysfs_strtoul_clamp(io_error_limit, dc->error_limit, 0, INT_MAX);
@@ -412,6 +413,7 @@ static struct attribute *bch_cached_dev_files[] = {
&sysfs_writeback_rate_update_seconds,
&sysfs_writeback_rate_i_term_inverse,
&sysfs_writeback_rate_p_term_inverse,
+ &sysfs_writeback_rate_minimum,
&sysfs_writeback_rate_debug,
&sysfs_errors,
&sysfs_io_error_limit,
--
2.17.1
From: Linus Walleij <[email protected]>
[ Upstream commit 28be5f15df2ee6882b0a122693159c96a28203c7 ]
commit efdfeb079cc3
("regulator: fixed: Convert to use GPIO descriptor only")
switched to use gpiod_get() to look up the regulator from the
gpiolib core whether that is device tree or boardfile.
This meant that we activate the code in
a603a2b8d86e ("gpio: of: Add special quirk to parse regulator flags")
which means the descriptors coming from the device tree already
have the right inversion and open drain semantics set up from
the gpiolib core.
As the fixed regulator was inspected again we got the
inverted inversion and things broke.
Fix it by ignoring the config in the device tree for now: the
later patches in the series will push all inversion handling
over to the gpiolib core and set it up properly in the
boardfiles for legacy devices, but I did not finish that
for this kernel cycle.
Fixes: commit efdfeb079cc3 ("regulator: fixed: Convert to use GPIO descriptor only")
Reported-by: Leonard Crestez <[email protected]>
Reported-by: Fabio Estevam <[email protected]>
Reported-by: John Stultz <[email protected]>
Reported-by: Anders Roxell <[email protected]>
Signed-off-by: Linus Walleij <[email protected]>
Tested-by: John Stultz <[email protected]>
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/regulator/fixed.c | 11 ++++++++---
1 file changed, 8 insertions(+), 3 deletions(-)
diff --git a/drivers/regulator/fixed.c b/drivers/regulator/fixed.c
index 988a7472c2ab..d68ff65a5adc 100644
--- a/drivers/regulator/fixed.c
+++ b/drivers/regulator/fixed.c
@@ -84,9 +84,14 @@ of_get_fixed_voltage_config(struct device *dev,
of_property_read_u32(np, "startup-delay-us", &config->startup_delay);
- config->enable_high = of_property_read_bool(np, "enable-active-high");
- config->gpio_is_open_drain = of_property_read_bool(np,
- "gpio-open-drain");
+ /*
+ * FIXME: we pulled active low/high and open drain handling into
+ * gpiolib so it will be handled there. Delete this in the second
+ * step when we also remove the custom inversion handling for all
+ * legacy boardfiles.
+ */
+ config->enable_high = 1;
+ config->gpio_is_open_drain = 0;
if (of_find_property(np, "vin-supply", NULL))
config->input_supply = "vin";
--
2.17.1
From: "Gustavo A. R. Silva" <[email protected]>
[ Upstream commit fbed20280d912449cfb40c382cb55e3d11502587 ]
There is a potential execution path in which function
of_find_compatible_node() returns NULL. In such a case,
we end up having a NULL pointer dereference when accessing
pointer *nfc_np* in function of_clk_get().
So, we better don't take any chances and fix this by null
checking pointer *nfc_np* before calling of_clk_get().
Addresses-Coverity-ID: 1473052 ("Dereference null return value")
Fixes: f88fc122cc34 ("mtd: nand: Cleanup/rework the atmel_nand driver")
Signed-off-by: Gustavo A. R. Silva <[email protected]>
Reviewed-by: Boris Brezillon <[email protected]>
Acked-by: Tudor Ambarus <[email protected]>
Signed-off-by: Miquel Raynal <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/mtd/nand/raw/atmel/nand-controller.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/drivers/mtd/nand/raw/atmel/nand-controller.c b/drivers/mtd/nand/raw/atmel/nand-controller.c
index a068b214ebaa..a594fb1e9a99 100644
--- a/drivers/mtd/nand/raw/atmel/nand-controller.c
+++ b/drivers/mtd/nand/raw/atmel/nand-controller.c
@@ -2063,6 +2063,10 @@ atmel_hsmc_nand_controller_legacy_init(struct atmel_hsmc_nand_controller *nc)
nand_np = dev->of_node;
nfc_np = of_find_compatible_node(dev->of_node, NULL,
"atmel,sama5d3-nfc");
+ if (!nfc_np) {
+ dev_err(dev, "Could not find device node for sama5d3-nfc\n");
+ return -ENODEV;
+ }
nc->clk = of_clk_get(nfc_np, 0);
if (IS_ERR(nc->clk)) {
--
2.17.1
From: Yu Zhao <[email protected]>
[ Upstream commit 5169894982bb67486d93cc1e10151712bb86bcb6 ]
This device reports SDHCI_CLOCK_INT_STABLE even though it's not
ready to take SDHCI_CLOCK_CARD_EN. The symptom is that reading
SDHCI_CLOCK_CONTROL after enabling the clock shows absence of the
bit from the register (e.g. expecting 0x0000fa07 = 0x0000fa03 |
SDHCI_CLOCK_CARD_EN but only observed the first operand).
mmc1: Timeout waiting for hardware cmd interrupt.
mmc1: sdhci: ============ SDHCI REGISTER DUMP ===========
mmc1: sdhci: Sys addr: 0x00000000 | Version: 0x00000603
mmc1: sdhci: Blk size: 0x00000000 | Blk cnt: 0x00000000
mmc1: sdhci: Argument: 0x00000000 | Trn mode: 0x00000000
mmc1: sdhci: Present: 0x01ff0001 | Host ctl: 0x00000001
mmc1: sdhci: Power: 0x0000000f | Blk gap: 0x00000000
mmc1: sdhci: Wake-up: 0x00000000 | Clock: 0x0000fa03
mmc1: sdhci: Timeout: 0x00000000 | Int stat: 0x00000000
mmc1: sdhci: Int enab: 0x00ff0083 | Sig enab: 0x00ff0083
mmc1: sdhci: AC12 err: 0x00000000 | Slot int: 0x00000000
mmc1: sdhci: Caps: 0x25fcc8bf | Caps_1: 0x00002077
mmc1: sdhci: Cmd: 0x00000000 | Max curr: 0x005800c8
mmc1: sdhci: Resp[0]: 0x00000000 | Resp[1]: 0x00000000
mmc1: sdhci: Resp[2]: 0x00000000 | Resp[3]: 0x00000000
mmc1: sdhci: Host ctl2: 0x00000008
mmc1: sdhci: ADMA Err: 0x00000000 | ADMA Ptr: 0x00000000
mmc1: sdhci: ============================================
The problem happens during wakeup from S3. Adding a delay quirk
after power up reliably fixes the problem.
Signed-off-by: Yu Zhao <[email protected]>
Signed-off-by: Ulf Hansson <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/mmc/host/sdhci-pci-o2micro.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/mmc/host/sdhci-pci-o2micro.c b/drivers/mmc/host/sdhci-pci-o2micro.c
index 77e9bc4aaee9..cc3ffeffd7a2 100644
--- a/drivers/mmc/host/sdhci-pci-o2micro.c
+++ b/drivers/mmc/host/sdhci-pci-o2micro.c
@@ -490,6 +490,9 @@ int sdhci_pci_o2_probe(struct sdhci_pci_chip *chip)
pci_write_config_byte(chip->pdev, O2_SD_LOCK_WP, scratch);
break;
case PCI_DEVICE_ID_O2_SEABIRD0:
+ if (chip->pdev->revision == 0x01)
+ chip->quirks |= SDHCI_QUIRK_DELAY_AFTER_POWER;
+ /* fall through */
case PCI_DEVICE_ID_O2_SEABIRD1:
/* UnLock WP */
ret = pci_read_config_byte(chip->pdev,
--
2.17.1
From: Sanskriti Sharma <[email protected]>
[ Upstream commit ce49d8436cffa9b7a6a5f110879d53e89dbc6746 ]
Ensure that all code paths in strbuf_addv() call va_end() on the
ap_saved copy that was made.
Fixes the following coverity complaint:
Error: VARARGS (CWE-237): [#def683]
tools/perf/util/strbuf.c:106: missing_va_end: va_end was not called
for "ap_saved".
Signed-off-by: Sanskriti Sharma <[email protected]>
Reviewed-by: Jiri Olsa <[email protected]>
Cc: Joe Lawrence <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
tools/perf/util/strbuf.c | 10 ++++++++--
1 file changed, 8 insertions(+), 2 deletions(-)
diff --git a/tools/perf/util/strbuf.c b/tools/perf/util/strbuf.c
index 3d1cf5bf7f18..9005fbe0780e 100644
--- a/tools/perf/util/strbuf.c
+++ b/tools/perf/util/strbuf.c
@@ -98,19 +98,25 @@ static int strbuf_addv(struct strbuf *sb, const char *fmt, va_list ap)
va_copy(ap_saved, ap);
len = vsnprintf(sb->buf + sb->len, sb->alloc - sb->len, fmt, ap);
- if (len < 0)
+ if (len < 0) {
+ va_end(ap_saved);
return len;
+ }
if (len > strbuf_avail(sb)) {
ret = strbuf_grow(sb, len);
- if (ret)
+ if (ret) {
+ va_end(ap_saved);
return ret;
+ }
len = vsnprintf(sb->buf + sb->len, sb->alloc - sb->len, fmt, ap_saved);
va_end(ap_saved);
if (len > strbuf_avail(sb)) {
pr_debug("this should not happen, your vsnprintf is broken");
+ va_end(ap_saved);
return -EINVAL;
}
}
+ va_end(ap_saved);
return strbuf_setlen(sb, sb->len + len);
}
--
2.17.1
From: Masahiro Yamada <[email protected]>
[ Upstream commit 0d55c668b218a1db68b5044bce4de74e1bd0f0c8 ]
NAND devices need additional data area (OOB) for error correction,
but it is also used for Bad Block Marker (BBM). In many cases, the
first byte in OOB is used for BBM, but the location actually depends
on chip vendors. The NAND controller should preserve the precious
BBM to keep track of bad blocks.
In Denali IP, the SPARE_AREA_SKIP_BYTES register is used to specify
the number of bytes to skip from the start of OOB. The ECC engine
will automatically skip the specified number of bytes when it gets
access to OOB area.
The same value for SPARE_AREA_SKIP_BYTES should be used between
firmware and the operating system if you intend to use the NAND
device across the control hand-off.
In fact, the current denali.c code expects firmware to have already
set the SPARE_AREA_SKIP_BYTES register, then reads the value out.
If no firmware (or bootloader) has initialized the controller, the
register value is zero, which is the default after power-on-reset.
In other words, the Linux driver cannot initialize the controller
by itself.
Some possible solutions are:
[1] Add a DT property to specify the skipped bytes in OOB
[2] Associate the preferred value with compatible
[3] Hard-code the default value in the driver
My first attempt was [1], but in the review process, [3] was suggested
as a counter-implementation.
(https://lore.kernel.org/patchwork/patch/983055/)
The default value 8 was chosen to match to the boot ROM of the UniPhier
platform. The preferred value may vary by platform. If so, please
trade up to a different solution.
Signed-off-by: Masahiro Yamada <[email protected]>
Reviewed-by: Boris Brezillon <[email protected]>
Signed-off-by: Miquel Raynal <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/mtd/nand/raw/denali.c | 14 ++++++++++----
1 file changed, 10 insertions(+), 4 deletions(-)
diff --git a/drivers/mtd/nand/raw/denali.c b/drivers/mtd/nand/raw/denali.c
index b864b93dd289..2242e999a76b 100644
--- a/drivers/mtd/nand/raw/denali.c
+++ b/drivers/mtd/nand/raw/denali.c
@@ -28,6 +28,7 @@
MODULE_LICENSE("GPL");
#define DENALI_NAND_NAME "denali-nand"
+#define DENALI_DEFAULT_OOB_SKIP_BYTES 8
/* for Indexed Addressing */
#define DENALI_INDEXED_CTRL 0x00
@@ -1105,12 +1106,17 @@ static void denali_hw_init(struct denali_nand_info *denali)
denali->revision = swab16(ioread32(denali->reg + REVISION));
/*
- * tell driver how many bit controller will skip before
- * writing ECC code in OOB, this register may be already
- * set by firmware. So we read this value out.
- * if this value is 0, just let it be.
+ * Set how many bytes should be skipped before writing data in OOB.
+ * If a non-zero value has already been set (by firmware or something),
+ * just use it. Otherwise, set the driver default.
*/
denali->oob_skip_bytes = ioread32(denali->reg + SPARE_AREA_SKIP_BYTES);
+ if (!denali->oob_skip_bytes) {
+ denali->oob_skip_bytes = DENALI_DEFAULT_OOB_SKIP_BYTES;
+ iowrite32(denali->oob_skip_bytes,
+ denali->reg + SPARE_AREA_SKIP_BYTES);
+ }
+
denali_detect_max_banks(denali);
iowrite32(0x0F, denali->reg + RB_PIN_ENABLED);
iowrite32(CHIP_EN_DONT_CARE__FLAG, denali->reg + CHIP_ENABLE_DONT_CARE);
--
2.17.1
From: Dou Liyang <[email protected]>
[ Upstream commit d0381bf4f80c571dde1244fe5b85dc35e8b3f546 ]
ACPI driver should make sure all the processor IDs in their ACPI Namespace
are unique. the driver performs a depth-first walk of the namespace tree
and calls the acpi_processor_ids_walk() to check the duplicate IDs.
But, the acpi_processor_ids_walk() mistakes the return value. If a
processor is checked, it returns true which causes the walk break
immediately, and other processors will never be checked.
Repace the value with AE_OK which is the standard acpi_status value.
And don't abort the namespace walk even on error.
Fixes: 8c8cb30f49b8 (acpi/processor: Implement DEVICE operator for processor enumeration)
Signed-off-by: Dou Liyang <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/acpi/acpi_processor.c | 7 ++++---
1 file changed, 4 insertions(+), 3 deletions(-)
diff --git a/drivers/acpi/acpi_processor.c b/drivers/acpi/acpi_processor.c
index 449d86d39965..fc447410ae4d 100644
--- a/drivers/acpi/acpi_processor.c
+++ b/drivers/acpi/acpi_processor.c
@@ -643,7 +643,7 @@ static acpi_status __init acpi_processor_ids_walk(acpi_handle handle,
status = acpi_get_type(handle, &acpi_type);
if (ACPI_FAILURE(status))
- return false;
+ return status;
switch (acpi_type) {
case ACPI_TYPE_PROCESSOR:
@@ -663,11 +663,12 @@ static acpi_status __init acpi_processor_ids_walk(acpi_handle handle,
}
processor_validated_ids_update(uid);
- return true;
+ return AE_OK;
err:
+ /* Exit on error, but don't abort the namespace walk */
acpi_handle_info(handle, "Invalid processor object\n");
- return false;
+ return AE_OK;
}
--
2.17.1
From: Sagi Grimberg <[email protected]>
[ Upstream commit 2acf70ade79d26b97611a8df52eb22aa33814cd4 ]
Queue deletion is done asynchronous when the last reference on the queue
is dropped. Thus, in order to make sure we don't over allocate under a
connect/disconnect storm, we let queue deletion complete before making
forward progress.
However, given that we flush the system_wq from rdma_cm context which
runs from a workqueue context, we can have a circular locking complaint
[1]. Fix that by using a private workqueue for queue deletion.
[1]:
======================================================
WARNING: possible circular locking dependency detected
4.19.0-rc4-dbg+ #3 Not tainted
------------------------------------------------------
kworker/5:0/39 is trying to acquire lock:
00000000a10b6db9 (&id_priv->handler_mutex){+.+.}, at: rdma_destroy_id+0x6f/0x440 [rdma_cm]
but task is already holding lock:
00000000331b4e2c ((work_completion)(&queue->release_work)){+.+.}, at: process_one_work+0x3ed/0xa20
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #3 ((work_completion)(&queue->release_work)){+.+.}:
process_one_work+0x474/0xa20
worker_thread+0x63/0x5a0
kthread+0x1cf/0x1f0
ret_from_fork+0x24/0x30
-> #2 ((wq_completion)"events"){+.+.}:
flush_workqueue+0xf3/0x970
nvmet_rdma_cm_handler+0x133d/0x1734 [nvmet_rdma]
cma_ib_req_handler+0x72f/0xf90 [rdma_cm]
cm_process_work+0x2e/0x110 [ib_cm]
cm_req_handler+0x135b/0x1c30 [ib_cm]
cm_work_handler+0x2b7/0x38cd [ib_cm]
process_one_work+0x4ae/0xa20
nvmet_rdma:nvmet_rdma_cm_handler: nvmet_rdma: disconnected (10): status 0 id 0000000040357082
worker_thread+0x63/0x5a0
kthread+0x1cf/0x1f0
ret_from_fork+0x24/0x30
nvme nvme0: Reconnecting in 10 seconds...
-> #1 (&id_priv->handler_mutex/1){+.+.}:
__mutex_lock+0xfe/0xbe0
mutex_lock_nested+0x1b/0x20
cma_ib_req_handler+0x6aa/0xf90 [rdma_cm]
cm_process_work+0x2e/0x110 [ib_cm]
cm_req_handler+0x135b/0x1c30 [ib_cm]
cm_work_handler+0x2b7/0x38cd [ib_cm]
process_one_work+0x4ae/0xa20
worker_thread+0x63/0x5a0
kthread+0x1cf/0x1f0
ret_from_fork+0x24/0x30
-> #0 (&id_priv->handler_mutex){+.+.}:
lock_acquire+0xc5/0x200
__mutex_lock+0xfe/0xbe0
mutex_lock_nested+0x1b/0x20
rdma_destroy_id+0x6f/0x440 [rdma_cm]
nvmet_rdma_release_queue_work+0x8e/0x1b0 [nvmet_rdma]
process_one_work+0x4ae/0xa20
worker_thread+0x63/0x5a0
kthread+0x1cf/0x1f0
ret_from_fork+0x24/0x30
Fixes: 777dc82395de ("nvmet-rdma: occasionally flush ongoing controller teardown")
Reported-by: Bart Van Assche <[email protected]>
Signed-off-by: Sagi Grimberg <[email protected]>
Tested-by: Bart Van Assche <[email protected]>
Signed-off-by: Christoph Hellwig <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/nvme/target/rdma.c | 19 +++++++++++++++----
1 file changed, 15 insertions(+), 4 deletions(-)
diff --git a/drivers/nvme/target/rdma.c b/drivers/nvme/target/rdma.c
index bfc4da660bb4..5becca88ccbe 100644
--- a/drivers/nvme/target/rdma.c
+++ b/drivers/nvme/target/rdma.c
@@ -122,6 +122,7 @@ struct nvmet_rdma_device {
int inline_page_count;
};
+struct workqueue_struct *nvmet_rdma_delete_wq;
static bool nvmet_rdma_use_srq;
module_param_named(use_srq, nvmet_rdma_use_srq, bool, 0444);
MODULE_PARM_DESC(use_srq, "Use shared receive queue.");
@@ -1267,12 +1268,12 @@ static int nvmet_rdma_queue_connect(struct rdma_cm_id *cm_id,
if (queue->host_qid == 0) {
/* Let inflight controller teardown complete */
- flush_scheduled_work();
+ flush_workqueue(nvmet_rdma_delete_wq);
}
ret = nvmet_rdma_cm_accept(cm_id, queue, &event->param.conn);
if (ret) {
- schedule_work(&queue->release_work);
+ queue_work(nvmet_rdma_delete_wq, &queue->release_work);
/* Destroying rdma_cm id is not needed here */
return 0;
}
@@ -1337,7 +1338,7 @@ static void __nvmet_rdma_queue_disconnect(struct nvmet_rdma_queue *queue)
if (disconnect) {
rdma_disconnect(queue->cm_id);
- schedule_work(&queue->release_work);
+ queue_work(nvmet_rdma_delete_wq, &queue->release_work);
}
}
@@ -1367,7 +1368,7 @@ static void nvmet_rdma_queue_connect_fail(struct rdma_cm_id *cm_id,
mutex_unlock(&nvmet_rdma_queue_mutex);
pr_err("failed to connect queue %d\n", queue->idx);
- schedule_work(&queue->release_work);
+ queue_work(nvmet_rdma_delete_wq, &queue->release_work);
}
/**
@@ -1649,8 +1650,17 @@ static int __init nvmet_rdma_init(void)
if (ret)
goto err_ib_client;
+ nvmet_rdma_delete_wq = alloc_workqueue("nvmet-rdma-delete-wq",
+ WQ_UNBOUND | WQ_MEM_RECLAIM | WQ_SYSFS, 0);
+ if (!nvmet_rdma_delete_wq) {
+ ret = -ENOMEM;
+ goto err_unreg_transport;
+ }
+
return 0;
+err_unreg_transport:
+ nvmet_unregister_transport(&nvmet_rdma_ops);
err_ib_client:
ib_unregister_client(&nvmet_rdma_ib_client);
return ret;
@@ -1658,6 +1668,7 @@ static int __init nvmet_rdma_init(void)
static void __exit nvmet_rdma_exit(void)
{
+ destroy_workqueue(nvmet_rdma_delete_wq);
nvmet_unregister_transport(&nvmet_rdma_ops);
ib_unregister_client(&nvmet_rdma_ib_client);
WARN_ON_ONCE(!list_empty(&nvmet_rdma_queue_list));
--
2.17.1
From: Rajneesh Bhardwaj <[email protected]>
[ Upstream commit 1cdda9486f5103fb133f88e662e48c504adbb779 ]
ACPI Low Power S0 Idle capabilities are announced via FADT table and can
be used to inform the kernel about the presence of one or more Low Power
Idle (LPI) entries as descried in LPIT table. LPIT table can exist
independently even if the FADT S0 Idle flag is not set and thus it could
confuse user since the following cpuidle attributes are created.
/sys/devices/system/cpu/cpuidle/low_power_idle_cpu_residency_us
/sys/devices/system/cpu/cpuidle/low_power_idle_system_residency_us
Presence or absence of above attributes could mean that the given
platform supports S0ix state or not.
This change allows to create the above cpuidle attributes only if
FADT table supports Low Power S0 Idle.
Signed-off-by: Rajneesh Bhardwaj <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/acpi/acpi_lpit.c | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/drivers/acpi/acpi_lpit.c b/drivers/acpi/acpi_lpit.c
index cf4fc0161164..e43cb71b6972 100644
--- a/drivers/acpi/acpi_lpit.c
+++ b/drivers/acpi/acpi_lpit.c
@@ -117,11 +117,17 @@ static void lpit_update_residency(struct lpit_residency_info *info,
if (!info->iomem_addr)
return;
+ if (!(acpi_gbl_FADT.flags & ACPI_FADT_LOW_POWER_S0))
+ return;
+
/* Silently fail, if cpuidle attribute group is not present */
sysfs_add_file_to_group(&cpu_subsys.dev_root->kobj,
&dev_attr_low_power_idle_system_residency_us.attr,
"cpuidle");
} else if (info->gaddr.space_id == ACPI_ADR_SPACE_FIXED_HARDWARE) {
+ if (!(acpi_gbl_FADT.flags & ACPI_FADT_LOW_POWER_S0))
+ return;
+
/* Silently fail, if cpuidle attribute group is not present */
sysfs_add_file_to_group(&cpu_subsys.dev_root->kobj,
&dev_attr_low_power_idle_cpu_residency_us.attr,
--
2.17.1
From: Nathan Chancellor <[email protected]>
[ Upstream commit a1108c7b2efb892350ba6a0e932dfd45622f4e2b ]
Clang warns when one enumerated type is implicitly converted to another.
drivers/spi/spi-ep93xx.c:342:62: warning: implicit conversion from
enumeration type 'enum dma_transfer_direction' to different enumeration
type 'enum dma_data_direction' [-Wenum-conversion]
nents = dma_map_sg(chan->device->dev, sgt->sgl, sgt->nents, dir);
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~
./include/linux/dma-mapping.h:428:58: note: expanded from macro
'dma_map_sg'
#define dma_map_sg(d, s, n, r) dma_map_sg_attrs(d, s, n, r, 0)
~~~~~~~~~~~~~~~~ ^
drivers/spi/spi-ep93xx.c:348:57: warning: implicit conversion from
enumeration type 'enum dma_transfer_direction' to different enumeration
type 'enum dma_data_direction' [-Wenum-conversion]
dma_unmap_sg(chan->device->dev, sgt->sgl, sgt->nents, dir);
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~
./include/linux/dma-mapping.h:429:62: note: expanded from macro
'dma_unmap_sg'
#define dma_unmap_sg(d, s, n, r) dma_unmap_sg_attrs(d, s, n, r, 0)
~~~~~~~~~~~~~~~~~~ ^
drivers/spi/spi-ep93xx.c:377:56: warning: implicit conversion from
enumeration type 'enum dma_transfer_direction' to different enumeration
type 'enum dma_data_direction' [-Wenum-conversion]
dma_unmap_sg(chan->device->dev, sgt->sgl, sgt->nents, dir);
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~
./include/linux/dma-mapping.h:429:62: note: expanded from macro
'dma_unmap_sg'
#define dma_unmap_sg(d, s, n, r) dma_unmap_sg_attrs(d, s, n, r, 0)
~~~~~~~~~~~~~~~~~~ ^
3 warnings generated.
dma_{,un}map_sg expect an enum of type dma_data_direction but this
driver uses dma_transfer_direction for everything. Convert the driver to
use dma_data_direction for these two functions.
There are two places that strictly require an enum of type
dma_transfer_direction: the direction member in struct dma_slave_config
and the direction parameter in dmaengine_prep_slave_sg. To avoid using
an explicit cast, add a simple function, ep93xx_dma_data_to_trans_dir,
to safely map between the two types because they are not 1 to 1 in
meaning.
Signed-off-by: Nathan Chancellor <[email protected]>
Reviewed-by: Nick Desaulniers <[email protected]>
Reviewed-by: Mika Westerberg <[email protected]>
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/spi/spi-ep93xx.c | 36 +++++++++++++++++++++++++-----------
1 file changed, 25 insertions(+), 11 deletions(-)
diff --git a/drivers/spi/spi-ep93xx.c b/drivers/spi/spi-ep93xx.c
index f1526757aaf6..79fc3940245a 100644
--- a/drivers/spi/spi-ep93xx.c
+++ b/drivers/spi/spi-ep93xx.c
@@ -246,6 +246,19 @@ static int ep93xx_spi_read_write(struct spi_master *master)
return -EINPROGRESS;
}
+static enum dma_transfer_direction
+ep93xx_dma_data_to_trans_dir(enum dma_data_direction dir)
+{
+ switch (dir) {
+ case DMA_TO_DEVICE:
+ return DMA_MEM_TO_DEV;
+ case DMA_FROM_DEVICE:
+ return DMA_DEV_TO_MEM;
+ default:
+ return DMA_TRANS_NONE;
+ }
+}
+
/**
* ep93xx_spi_dma_prepare() - prepares a DMA transfer
* @master: SPI master
@@ -257,7 +270,7 @@ static int ep93xx_spi_read_write(struct spi_master *master)
*/
static struct dma_async_tx_descriptor *
ep93xx_spi_dma_prepare(struct spi_master *master,
- enum dma_transfer_direction dir)
+ enum dma_data_direction dir)
{
struct ep93xx_spi *espi = spi_master_get_devdata(master);
struct spi_transfer *xfer = master->cur_msg->state;
@@ -277,9 +290,9 @@ ep93xx_spi_dma_prepare(struct spi_master *master,
buswidth = DMA_SLAVE_BUSWIDTH_1_BYTE;
memset(&conf, 0, sizeof(conf));
- conf.direction = dir;
+ conf.direction = ep93xx_dma_data_to_trans_dir(dir);
- if (dir == DMA_DEV_TO_MEM) {
+ if (dir == DMA_FROM_DEVICE) {
chan = espi->dma_rx;
buf = xfer->rx_buf;
sgt = &espi->rx_sgt;
@@ -343,7 +356,8 @@ ep93xx_spi_dma_prepare(struct spi_master *master,
if (!nents)
return ERR_PTR(-ENOMEM);
- txd = dmaengine_prep_slave_sg(chan, sgt->sgl, nents, dir, DMA_CTRL_ACK);
+ txd = dmaengine_prep_slave_sg(chan, sgt->sgl, nents, conf.direction,
+ DMA_CTRL_ACK);
if (!txd) {
dma_unmap_sg(chan->device->dev, sgt->sgl, sgt->nents, dir);
return ERR_PTR(-ENOMEM);
@@ -360,13 +374,13 @@ ep93xx_spi_dma_prepare(struct spi_master *master,
* unmapped.
*/
static void ep93xx_spi_dma_finish(struct spi_master *master,
- enum dma_transfer_direction dir)
+ enum dma_data_direction dir)
{
struct ep93xx_spi *espi = spi_master_get_devdata(master);
struct dma_chan *chan;
struct sg_table *sgt;
- if (dir == DMA_DEV_TO_MEM) {
+ if (dir == DMA_FROM_DEVICE) {
chan = espi->dma_rx;
sgt = &espi->rx_sgt;
} else {
@@ -381,8 +395,8 @@ static void ep93xx_spi_dma_callback(void *callback_param)
{
struct spi_master *master = callback_param;
- ep93xx_spi_dma_finish(master, DMA_MEM_TO_DEV);
- ep93xx_spi_dma_finish(master, DMA_DEV_TO_MEM);
+ ep93xx_spi_dma_finish(master, DMA_TO_DEVICE);
+ ep93xx_spi_dma_finish(master, DMA_FROM_DEVICE);
spi_finalize_current_transfer(master);
}
@@ -392,15 +406,15 @@ static int ep93xx_spi_dma_transfer(struct spi_master *master)
struct ep93xx_spi *espi = spi_master_get_devdata(master);
struct dma_async_tx_descriptor *rxd, *txd;
- rxd = ep93xx_spi_dma_prepare(master, DMA_DEV_TO_MEM);
+ rxd = ep93xx_spi_dma_prepare(master, DMA_FROM_DEVICE);
if (IS_ERR(rxd)) {
dev_err(&master->dev, "DMA RX failed: %ld\n", PTR_ERR(rxd));
return PTR_ERR(rxd);
}
- txd = ep93xx_spi_dma_prepare(master, DMA_MEM_TO_DEV);
+ txd = ep93xx_spi_dma_prepare(master, DMA_TO_DEVICE);
if (IS_ERR(txd)) {
- ep93xx_spi_dma_finish(master, DMA_DEV_TO_MEM);
+ ep93xx_spi_dma_finish(master, DMA_FROM_DEVICE);
dev_err(&master->dev, "DMA TX failed: %ld\n", PTR_ERR(txd));
return PTR_ERR(txd);
}
--
2.17.1
From: Sanskriti Sharma <[email protected]>
[ Upstream commit 1e44224fb0528b4c0cc176bde2bb31e9127eb14b ]
For each system in a given pevent, read_event_files() reads in a
temporary 'sys' string. Be sure to free this string before moving onto
to the next system and/or leaving read_event_files().
Fixes the following coverity complaints:
Error: RESOURCE_LEAK (CWE-772):
tools/perf/util/trace-event-read.c:343: overwrite_var: Overwriting
"sys" in "sys = read_string()" leaks the storage that "sys" points to.
tools/perf/util/trace-event-read.c:353: leaked_storage: Variable "sys"
going out of scope leaks the storage it points to.
Signed-off-by: Sanskriti Sharma <[email protected]>
Reviewed-by: Jiri Olsa <[email protected]>
Cc: Joe Lawrence <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
tools/perf/util/trace-event-read.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/tools/perf/util/trace-event-read.c b/tools/perf/util/trace-event-read.c
index 3dfc1db6b25b..5eb1b2469bba 100644
--- a/tools/perf/util/trace-event-read.c
+++ b/tools/perf/util/trace-event-read.c
@@ -349,9 +349,12 @@ static int read_event_files(struct tep_handle *pevent)
for (x=0; x < count; x++) {
size = read8(pevent);
ret = read_event_file(pevent, sys, size);
- if (ret)
+ if (ret) {
+ free(sys);
return ret;
+ }
}
+ free(sys);
}
return 0;
}
--
2.17.1
From: Javier González <[email protected]>
[ Upstream commit d8adaa3b86324c6186d0adf74bc256bdacfffdb6 ]
In pblk, when a new line is allocated, metadata for the previously
written line is scheduled. This is done through a fixed memory region
that is shared through time and contexts across different lines and
therefore protected by a lock. Unfortunately, this lock is not properly
covering all the metadata used for sharing this memory regions,
resulting in a race condition.
This patch fixes this race condition by protecting this metadata
properly.
Fixes: dd2a43437337 ("lightnvm: pblk: sched. metadata on write thread")
Signed-off-by: Javier González <[email protected]>
Signed-off-by: Matias Bjørling <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/lightnvm/pblk-write.c | 14 +++++++-------
1 file changed, 7 insertions(+), 7 deletions(-)
diff --git a/drivers/lightnvm/pblk-write.c b/drivers/lightnvm/pblk-write.c
index ee774a86cf1e..879227d584e7 100644
--- a/drivers/lightnvm/pblk-write.c
+++ b/drivers/lightnvm/pblk-write.c
@@ -417,12 +417,11 @@ int pblk_submit_meta_io(struct pblk *pblk, struct pblk_line *meta_line)
rqd->ppa_list[i] = addr_to_gen_ppa(pblk, paddr, id);
}
+ spin_lock(&l_mg->close_lock);
emeta->mem += rq_len;
- if (emeta->mem >= lm->emeta_len[0]) {
- spin_lock(&l_mg->close_lock);
+ if (emeta->mem >= lm->emeta_len[0])
list_del(&meta_line->list);
- spin_unlock(&l_mg->close_lock);
- }
+ spin_unlock(&l_mg->close_lock);
pblk_down_page(pblk, rqd->ppa_list, rqd->nr_ppas);
@@ -491,14 +490,15 @@ static struct pblk_line *pblk_should_submit_meta_io(struct pblk *pblk,
struct pblk_line *meta_line;
spin_lock(&l_mg->close_lock);
-retry:
if (list_empty(&l_mg->emeta_list)) {
spin_unlock(&l_mg->close_lock);
return NULL;
}
meta_line = list_first_entry(&l_mg->emeta_list, struct pblk_line, list);
- if (meta_line->emeta->mem >= lm->emeta_len[0])
- goto retry;
+ if (meta_line->emeta->mem >= lm->emeta_len[0]) {
+ spin_unlock(&l_mg->close_lock);
+ return NULL;
+ }
spin_unlock(&l_mg->close_lock);
if (!pblk_valid_meta_ppa(pblk, meta_line, data_rqd))
--
2.17.1
From: Janosch Frank <[email protected]>
[ Upstream commit b5130dc2224d1881f24224c0590c6d97f2168d6a ]
When running as a level 3 guest with no host provided sthyi support
sclp_ocf_cpc_name_copy() will only return zeroes. Zeroes are not a
valid group name, so let's not indicate that the group name field is
valid.
Also the group name is not dependent on stsi, let's not return based
on stsi before setting it.
Fixes: 95ca2cb57985 ("KVM: s390: Add sthyi emulation")
Signed-off-by: Janosch Frank <[email protected]>
Signed-off-by: Martin Schwidefsky <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/s390/kernel/sthyi.c | 8 +++++---
1 file changed, 5 insertions(+), 3 deletions(-)
diff --git a/arch/s390/kernel/sthyi.c b/arch/s390/kernel/sthyi.c
index 0859cde36f75..888cc2f166db 100644
--- a/arch/s390/kernel/sthyi.c
+++ b/arch/s390/kernel/sthyi.c
@@ -183,17 +183,19 @@ static void fill_hdr(struct sthyi_sctns *sctns)
static void fill_stsi_mac(struct sthyi_sctns *sctns,
struct sysinfo_1_1_1 *sysinfo)
{
+ sclp_ocf_cpc_name_copy(sctns->mac.infmname);
+ if (*(u64 *)sctns->mac.infmname != 0)
+ sctns->mac.infmval1 |= MAC_NAME_VLD;
+
if (stsi(sysinfo, 1, 1, 1))
return;
- sclp_ocf_cpc_name_copy(sctns->mac.infmname);
-
memcpy(sctns->mac.infmtype, sysinfo->type, sizeof(sctns->mac.infmtype));
memcpy(sctns->mac.infmmanu, sysinfo->manufacturer, sizeof(sctns->mac.infmmanu));
memcpy(sctns->mac.infmpman, sysinfo->plant, sizeof(sctns->mac.infmpman));
memcpy(sctns->mac.infmseq, sysinfo->sequence, sizeof(sctns->mac.infmseq));
- sctns->mac.infmval1 |= MAC_ID_VLD | MAC_NAME_VLD;
+ sctns->mac.infmval1 |= MAC_ID_VLD;
}
static void fill_stsi_par(struct sthyi_sctns *sctns,
--
2.17.1
From: Thierry Reding <[email protected]>
[ Upstream commit 95dcd64bc5a27080beaa344edfe5bdcca3d2e7dc ]
Technically this is not required because disabling the PWM should be
enough. However, when support for atomic operations was implemented in
the PWM subsystem, only actual changes to the PWM channel are applied
during pwm_config(), which means that during after resume from suspend
the old settings won't be applied.
One possible solution is for the PWM driver to implement its own PM
operations such that settings from before suspend get applied on resume.
This has the disadvantage of completely ignoring any particular ordering
requirements that PWM user drivers might have, so it is best to leave it
up to the user drivers to apply the settings that they want at the
appropriate time.
Another way to solve this would be to read back the current state of the
PWM at the time of resume. That way, in case the configuration was lost
during suspend, applying the old settings in PWM user drivers would
actually get them applied because they differ from the current settings.
However, not all PWM drivers support reading the hardware state, and not
all hardware may support it.
The best workaround at this point seems to be to let PWM user drivers
tell the PWM subsystem that the PWM is turned off by, in addition to
disabling it, also setting the duty cycle to 0. This causes the resume
operation to apply a configuration that is different from the current
configuration, resulting in the proper state from before suspend getting
restored.
Signed-off-by: Thierry Reding <[email protected]>
Signed-off-by: Guenter Roeck <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/hwmon/pwm-fan.c | 12 +++++++++++-
1 file changed, 11 insertions(+), 1 deletion(-)
diff --git a/drivers/hwmon/pwm-fan.c b/drivers/hwmon/pwm-fan.c
index 7838af58f92d..9d611dd268e1 100644
--- a/drivers/hwmon/pwm-fan.c
+++ b/drivers/hwmon/pwm-fan.c
@@ -290,9 +290,19 @@ static int pwm_fan_remove(struct platform_device *pdev)
static int pwm_fan_suspend(struct device *dev)
{
struct pwm_fan_ctx *ctx = dev_get_drvdata(dev);
+ struct pwm_args args;
+ int ret;
+
+ pwm_get_args(ctx->pwm, &args);
+
+ if (ctx->pwm_value) {
+ ret = pwm_config(ctx->pwm, 0, args.period);
+ if (ret < 0)
+ return ret;
- if (ctx->pwm_value)
pwm_disable(ctx->pwm);
+ }
+
return 0;
}
--
2.17.1
From: Wang Dongsheng <[email protected]>
[ Upstream commit c7eabbee3de99347105faa7fd925a500ccf43baf ]
The device specific resource can be free in free_slot after
removing host controller.
Signed-off-by: Wang Dongsheng <[email protected]>
Acked-by: Adrian Hunter <[email protected]>
Signed-off-by: Ulf Hansson <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/mmc/host/sdhci-acpi.c | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/drivers/mmc/host/sdhci-acpi.c b/drivers/mmc/host/sdhci-acpi.c
index 32321bd596d8..c61109f7b793 100644
--- a/drivers/mmc/host/sdhci-acpi.c
+++ b/drivers/mmc/host/sdhci-acpi.c
@@ -76,6 +76,7 @@ struct sdhci_acpi_slot {
size_t priv_size;
int (*probe_slot)(struct platform_device *, const char *, const char *);
int (*remove_slot)(struct platform_device *);
+ int (*free_slot)(struct platform_device *pdev);
int (*setup_host)(struct platform_device *pdev);
};
@@ -756,6 +757,9 @@ static int sdhci_acpi_probe(struct platform_device *pdev)
err_cleanup:
sdhci_cleanup_host(c->host);
err_free:
+ if (c->slot && c->slot->free_slot)
+ c->slot->free_slot(pdev);
+
sdhci_free_host(c->host);
return err;
}
@@ -777,6 +781,10 @@ static int sdhci_acpi_remove(struct platform_device *pdev)
dead = (sdhci_readl(c->host, SDHCI_INT_STATUS) == ~0);
sdhci_remove_host(c->host, dead);
+
+ if (c->slot && c->slot->free_slot)
+ c->slot->free_slot(pdev);
+
sdhci_free_host(c->host);
return 0;
--
2.17.1
From: Javier González <[email protected]>
[ Upstream commit 44cdbdc657b23f75736eca3e88b781f009104363 ]
pblk exposes a sysfs interface that represents its internal state. Part
of this state is the map bitmap for the current open line, which should
be protected by the line lock to avoid a race when freeing the line
metadata. Currently, it is not.
This patch makes sure that the line state is consistent and NULL
bitmap pointers are not dereferenced.
Signed-off-by: Javier González <[email protected]>
Signed-off-by: Matias Bjørling <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/lightnvm/pblk-core.c | 5 +++--
drivers/lightnvm/pblk-sysfs.c | 8 +++++++-
2 files changed, 10 insertions(+), 3 deletions(-)
diff --git a/drivers/lightnvm/pblk-core.c b/drivers/lightnvm/pblk-core.c
index 00984b486fea..2940cdc87af1 100644
--- a/drivers/lightnvm/pblk-core.c
+++ b/drivers/lightnvm/pblk-core.c
@@ -1539,13 +1539,14 @@ struct pblk_line *pblk_line_replace_data(struct pblk *pblk)
struct pblk_line *cur, *new = NULL;
unsigned int left_seblks;
- cur = l_mg->data_line;
new = l_mg->data_next;
if (!new)
goto out;
- l_mg->data_line = new;
spin_lock(&l_mg->free_lock);
+ cur = l_mg->data_line;
+ l_mg->data_line = new;
+
pblk_line_setup_metadata(new, l_mg, &pblk->lm);
spin_unlock(&l_mg->free_lock);
diff --git a/drivers/lightnvm/pblk-sysfs.c b/drivers/lightnvm/pblk-sysfs.c
index 9fc3dfa168b4..8d2ed510c04b 100644
--- a/drivers/lightnvm/pblk-sysfs.c
+++ b/drivers/lightnvm/pblk-sysfs.c
@@ -262,8 +262,14 @@ static ssize_t pblk_sysfs_lines(struct pblk *pblk, char *page)
sec_in_line = l_mg->data_line->sec_in_line;
meta_weight = bitmap_weight(&l_mg->meta_bitmap,
PBLK_DATA_LINES);
- map_weight = bitmap_weight(l_mg->data_line->map_bitmap,
+
+ spin_lock(&l_mg->data_line->lock);
+ if (l_mg->data_line->map_bitmap)
+ map_weight = bitmap_weight(l_mg->data_line->map_bitmap,
lm->sec_per_line);
+ else
+ map_weight = 0;
+ spin_unlock(&l_mg->data_line->lock);
}
spin_unlock(&l_mg->free_lock);
--
2.17.1
From: Serhey Popovych <[email protected]>
[ Upstream commit df52eab23d703142c766ac00bdb8db19d71238d0 ]
Configuring generic network device parameters on tun will fail in
presence of IFLA_INFO_KIND attribute in IFLA_LINKINFO nested attribute
since tun_validate() always return failure.
This can be visualized with following ip-link(8) command sequences:
# ip link set dev tun0 group 100
# ip link set dev tun0 group 100 type tun
RTNETLINK answers: Invalid argument
with contrast to dummy and veth drivers:
# ip link set dev dummy0 group 100
# ip link set dev dummy0 type dummy
# ip link set dev veth0 group 100
# ip link set dev veth0 group 100 type veth
Fix by returning zero in tun_validate() when @data is NULL that is
always in case since rtnl_link_ops->maxtype is zero in tun driver.
Fixes: f019a7a594d9 ("tun: Implement ip link del tunXXX")
Signed-off-by: Serhey Popovych <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/tun.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/net/tun.c b/drivers/net/tun.c
index 50e9cc19023a..c52207beef88 100644
--- a/drivers/net/tun.c
+++ b/drivers/net/tun.c
@@ -2264,6 +2264,8 @@ static void tun_setup(struct net_device *dev)
static int tun_validate(struct nlattr *tb[], struct nlattr *data[],
struct netlink_ext_ack *extack)
{
+ if (!data)
+ return 0;
return -EINVAL;
}
--
2.17.1
From: Jia-Ju Bai <[email protected]>
[ Upstream commit 7325b4bbe5952e3e939f15de812f2ee0c0d33ca9 ]
The driver may sleep with holding a spinlock.
The function call paths (from bottom to top) in Linux-4.16 are:
[FUNC] nvm_dev_dma_alloc(GFP_KERNEL)
drivers/lightnvm/pblk-core.c, 754:
nvm_dev_dma_alloc in pblk_line_submit_smeta_io
drivers/lightnvm/pblk-core.c, 1048:
pblk_line_submit_smeta_io in pblk_line_init_bb
drivers/lightnvm/pblk-core.c, 1434:
pblk_line_init_bb in pblk_line_replace_data
drivers/lightnvm/pblk-recovery.c, 980:
pblk_line_replace_data in pblk_recov_l2p
drivers/lightnvm/pblk-recovery.c, 976:
spin_lock in pblk_recov_l2p
[FUNC] bio_map_kern(GFP_KERNEL)
drivers/lightnvm/pblk-core.c, 762:
bio_map_kern in pblk_line_submit_smeta_io
drivers/lightnvm/pblk-core.c, 1048:
pblk_line_submit_smeta_io in pblk_line_init_bb
drivers/lightnvm/pblk-core.c, 1434:
pblk_line_init_bb in pblk_line_replace_data
drivers/lightnvm/pblk-recovery.c, 980:
pblk_line_replace_data in pblk_recov_l2p
drivers/lightnvm/pblk-recovery.c, 976:
spin_lock in pblk_recov_l2p
To fix these bugs, the call to pblk_line_replace_data()
is moved out of the spinlock protection.
These bugs are found by my static analysis tool DSAC.
Signed-off-by: Jia-Ju Bai <[email protected]>
Reviewed-by: Javier González <[email protected]>
Signed-off-by: Matias Bjørling <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/lightnvm/pblk-recovery.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/drivers/lightnvm/pblk-recovery.c b/drivers/lightnvm/pblk-recovery.c
index e232e47e1353..df75d9caec45 100644
--- a/drivers/lightnvm/pblk-recovery.c
+++ b/drivers/lightnvm/pblk-recovery.c
@@ -956,12 +956,14 @@ struct pblk_line *pblk_recov_l2p(struct pblk *pblk)
}
}
- spin_lock(&l_mg->free_lock);
if (!open_lines) {
+ spin_lock(&l_mg->free_lock);
WARN_ON_ONCE(!test_and_clear_bit(meta_line,
&l_mg->meta_bitmap));
+ spin_unlock(&l_mg->free_lock);
pblk_line_replace_data(pblk);
} else {
+ spin_lock(&l_mg->free_lock);
/* Allocate next line for preparation */
l_mg->data_next = pblk_line_get(pblk);
if (l_mg->data_next) {
@@ -969,8 +971,8 @@ struct pblk_line *pblk_recov_l2p(struct pblk *pblk)
l_mg->data_next->type = PBLK_LINETYPE_DATA;
is_next = 1;
}
+ spin_unlock(&l_mg->free_lock);
}
- spin_unlock(&l_mg->free_lock);
if (is_next)
pblk_line_erase(pblk, l_mg->data_next);
--
2.17.1
From: Prarit Bhargava <[email protected]>
[ Upstream commit f69ffc5d3db8f1f03fd6d1df5930f9a1fbd787b6 ]
cpupower crashes on VMWare guests. The guests have the AMD PStateDef MSR
(0xC0010064 + state number) set to zero. As a result fid and did are zero
and the crash occurs because of a divide by zero (cof = fid/did). This
can be prevented by checking the enable bit in the PStateDef MSR before
calculating cof. By doing this the value of pstate[i] remains zero and
the value can be tested before displaying the active Pstates.
Check the enable bit in the PstateDef register for all supported families
and only print out enabled Pstates.
Signed-off-by: Prarit Bhargava <[email protected]>
Cc: Shuah Khan <[email protected]>
Cc: Stafford Horne <[email protected]>
Signed-off-by: Shuah Khan (Samsung OSG) <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
tools/power/cpupower/utils/cpufreq-info.c | 2 ++
tools/power/cpupower/utils/helpers/amd.c | 5 +++++
2 files changed, 7 insertions(+)
diff --git a/tools/power/cpupower/utils/cpufreq-info.c b/tools/power/cpupower/utils/cpufreq-info.c
index df43cd45d810..ccd08dd00996 100644
--- a/tools/power/cpupower/utils/cpufreq-info.c
+++ b/tools/power/cpupower/utils/cpufreq-info.c
@@ -200,6 +200,8 @@ static int get_boost_mode(unsigned int cpu)
printf(_(" Boost States: %d\n"), b_states);
printf(_(" Total States: %d\n"), pstate_no);
for (i = 0; i < pstate_no; i++) {
+ if (!pstates[i])
+ continue;
if (i < b_states)
printf(_(" Pstate-Pb%d: %luMHz (boost state)"
"\n"), i, pstates[i]);
diff --git a/tools/power/cpupower/utils/helpers/amd.c b/tools/power/cpupower/utils/helpers/amd.c
index bb41cdd0df6b..58d23997424d 100644
--- a/tools/power/cpupower/utils/helpers/amd.c
+++ b/tools/power/cpupower/utils/helpers/amd.c
@@ -119,6 +119,11 @@ int decode_pstates(unsigned int cpu, unsigned int cpu_family,
}
if (read_msr(cpu, MSR_AMD_PSTATE + i, &pstate.val))
return -1;
+ if ((cpu_family == 0x17) && (!pstate.fam17h_bits.en))
+ continue;
+ else if (!pstate.bits.en)
+ continue;
+
pstates[i] = get_cof(cpu_family, pstate);
}
*no = i;
--
2.17.1
From: Sanskriti Sharma <[email protected]>
[ Upstream commit faedbf3fd19f2511a39397f76359e4cc6ee93072 ]
Free tracing_data structure in tracing_data_get() error paths.
Fixes the following coverity complaint:
Error: RESOURCE_LEAK (CWE-772):
leaked_storage: Variable "tdata" going out of scope leaks the storage
Signed-off-by: Sanskriti Sharma <[email protected]>
Reviewed-by: Jiri Olsa <[email protected]>
Cc: Joe Lawrence <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
tools/perf/util/trace-event-info.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/tools/perf/util/trace-event-info.c b/tools/perf/util/trace-event-info.c
index 7b0ca7cbb7de..8ad8e755127b 100644
--- a/tools/perf/util/trace-event-info.c
+++ b/tools/perf/util/trace-event-info.c
@@ -531,12 +531,14 @@ struct tracing_data *tracing_data_get(struct list_head *pattrs,
"/tmp/perf-XXXXXX");
if (!mkstemp(tdata->temp_file)) {
pr_debug("Can't make temp file");
+ free(tdata);
return NULL;
}
temp_fd = open(tdata->temp_file, O_RDWR);
if (temp_fd < 0) {
pr_debug("Can't read '%s'", tdata->temp_file);
+ free(tdata);
return NULL;
}
--
2.17.1
From: Waiman Long <[email protected]>
[ Upstream commit 9506a7425b094d2f1d9c877ed5a78f416669269b ]
It was found that when debug_locks was turned off because of a problem
found by the lockdep code, the system performance could drop quite
significantly when the lock_stat code was also configured into the
kernel. For instance, parallel kernel build time on a 4-socket x86-64
server nearly doubled.
Further analysis into the cause of the slowdown traced back to the
frequent call to debug_locks_off() from the __lock_acquired() function
probably due to some inconsistent lockdep states with debug_locks
off. The debug_locks_off() function did an unconditional atomic xchg
to write a 0 value into debug_locks which had already been set to 0.
This led to severe cacheline contention in the cacheline that held
debug_locks. As debug_locks is being referenced in quite a few different
places in the kernel, this greatly slow down the system performance.
To prevent that trashing of debug_locks cacheline, lock_acquired()
and lock_contended() now checks the state of debug_locks before
proceeding. The debug_locks_off() function is also modified to check
debug_locks before calling __debug_locks_off().
Signed-off-by: Waiman Long <[email protected]>
Cc: Andrew Morton <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Paul E. McKenney <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Will Deacon <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Ingo Molnar <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
kernel/locking/lockdep.c | 4 ++--
lib/debug_locks.c | 2 +-
2 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/kernel/locking/lockdep.c b/kernel/locking/lockdep.c
index dd13f865ad40..26b57e24476f 100644
--- a/kernel/locking/lockdep.c
+++ b/kernel/locking/lockdep.c
@@ -4122,7 +4122,7 @@ void lock_contended(struct lockdep_map *lock, unsigned long ip)
{
unsigned long flags;
- if (unlikely(!lock_stat))
+ if (unlikely(!lock_stat || !debug_locks))
return;
if (unlikely(current->lockdep_recursion))
@@ -4142,7 +4142,7 @@ void lock_acquired(struct lockdep_map *lock, unsigned long ip)
{
unsigned long flags;
- if (unlikely(!lock_stat))
+ if (unlikely(!lock_stat || !debug_locks))
return;
if (unlikely(current->lockdep_recursion))
diff --git a/lib/debug_locks.c b/lib/debug_locks.c
index 96c4c633d95e..124fdf238b3d 100644
--- a/lib/debug_locks.c
+++ b/lib/debug_locks.c
@@ -37,7 +37,7 @@ EXPORT_SYMBOL_GPL(debug_locks_silent);
*/
int debug_locks_off(void)
{
- if (__debug_locks_off()) {
+ if (debug_locks && __debug_locks_off()) {
if (!debug_locks_silent) {
console_verbose();
return 1;
--
2.17.1
From: Sanskriti Sharma <[email protected]>
[ Upstream commit 9c8a182e5a73e01afd11742a2ab887bf338fdafd ]
parse_ftrace_printk() tokenizes and parses a line, calling strdup() each
iteration. Add code to free this temporary format string duplicate.
Fixes the following coverity complaints:
Error: RESOURCE_LEAK (CWE-772):
tools/perf/util/trace-event-parse.c:158: overwrite_var: Overwriting
"printk" in "printk = strdup(fmt + 1)" leaks the storage that "printk"
points to.
tools/perf/util/trace-event-parse.c:162: leaked_storage: Variable
"printk" going out of scope leaks the storage it points to.
Signed-off-by: Sanskriti Sharma <[email protected]>
Reviewed-by: Jiri Olsa <[email protected]>
Cc: Joe Lawrence <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
tools/perf/util/trace-event-parse.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/tools/perf/util/trace-event-parse.c b/tools/perf/util/trace-event-parse.c
index e76214f8d596..b15a9bf1837b 100644
--- a/tools/perf/util/trace-event-parse.c
+++ b/tools/perf/util/trace-event-parse.c
@@ -158,6 +158,7 @@ void parse_ftrace_printk(struct tep_handle *pevent,
printk = strdup(fmt+1);
line = strtok_r(NULL, "\n", &next);
tep_register_print_string(pevent, printk, addr);
+ free(printk);
}
}
--
2.17.1
From: Ivan Khoronzhuk <[email protected]>
[ Upstream commit 9737cc99dd14b5b8b9d267618a6061feade8ea68 ]
After flushing all mcast entries from the table, the ones contained in
mc list of ndev are not restored when promisc mode is toggled off,
because they are considered as synched with ALE, thus, in order to
restore them after promisc mode - reset syncing info. This fix
touches only switch mode devices, including single port boards
like Beagle Bone.
Fixes: commit 5da1948969bc
("net: ethernet: ti: cpsw: fix lost of mcast packets while rx_mode update")
Signed-off-by: Ivan Khoronzhuk <[email protected]>
Reviewed-by: Grygorii Strashko <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/ti/cpsw.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/net/ethernet/ti/cpsw.c b/drivers/net/ethernet/ti/cpsw.c
index 832bce07c385..5dd838a67417 100644
--- a/drivers/net/ethernet/ti/cpsw.c
+++ b/drivers/net/ethernet/ti/cpsw.c
@@ -642,6 +642,7 @@ static void cpsw_set_promiscious(struct net_device *ndev, bool enable)
/* Clear all mcast from ALE */
cpsw_ale_flush_multicast(ale, ALE_ALL_PORTS, -1);
+ __dev_mc_unsync(ndev, NULL);
/* Flood All Unicast Packets to Host port */
cpsw_ale_control_set(ale, 0, ALE_P0_UNI_FLOOD, 1);
--
2.17.1
From: Eric Dumazet <[email protected]>
[ Upstream commit 4c16128b6271e70c8743178e90cccee147858503 ]
At least UDP / TCP stacks can now cook skbs with a tstamp using
MONOTONIC base (or arbitrary values with SCM_TXTIME)
Since loopback driver does not call (directly or indirectly)
skb_scrub_packet(), we need to clear skb->tstamp so that
net_timestamp_check() can eventually resample the time,
using ktime_get_real().
Fixes: 80b14dee2bea ("net: Add a new socket option for a future transmit time.")
Fixes: fb420d5d91c1 ("tcp/fq: move back to CLOCK_MONOTONIC")
Signed-off-by: Eric Dumazet <[email protected]>
Cc: Willem de Bruijn <[email protected]>
Cc: Soheil Hassas Yeganeh <[email protected]>
Acked-by: Soheil Hassas Yeganeh <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/loopback.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/drivers/net/loopback.c b/drivers/net/loopback.c
index 30612497643c..d192936b76cf 100644
--- a/drivers/net/loopback.c
+++ b/drivers/net/loopback.c
@@ -75,6 +75,10 @@ static netdev_tx_t loopback_xmit(struct sk_buff *skb,
int len;
skb_tx_timestamp(skb);
+
+ /* do not fool net_timestamp_check() with various clock bases */
+ skb->tstamp = 0;
+
skb_orphan(skb);
/* Before queueing this packet to netif_rx(),
--
2.17.1
From: Ryan C Goodfellow <[email protected]>
[ Upstream commit 5948185b97fa1f83d7855e638a72982a1073ebf5 ]
This commit makes it possible to use devlink to split the 100G CXP
Netronome into two 40G interfaces. Currently when you ask for 2
interfaces, the math in src/nfp_devlink.c:nfp_devlink_port_split
calculates that you want 5 lanes per port because for some reason
eth_port.port_lanes=10 (shouldn't this be 12 for CXP?). What we really
want when asking for 2 breakout interfaces is 4 lanes per port. This
commit makes that happen by calculating based on 8 lanes if 10 are
present.
Signed-off-by: Ryan C Goodfellow <[email protected]>
Reviewed-by: Jakub Kicinski <[email protected]>
Reviewed-by: Greg Weeks <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
.../net/ethernet/netronome/nfp/nfp_devlink.c | 17 ++++++++++++++---
1 file changed, 14 insertions(+), 3 deletions(-)
diff --git a/drivers/net/ethernet/netronome/nfp/nfp_devlink.c b/drivers/net/ethernet/netronome/nfp/nfp_devlink.c
index db463e20a876..e9a4179e7e48 100644
--- a/drivers/net/ethernet/netronome/nfp/nfp_devlink.c
+++ b/drivers/net/ethernet/netronome/nfp/nfp_devlink.c
@@ -96,6 +96,7 @@ nfp_devlink_port_split(struct devlink *devlink, unsigned int port_index,
{
struct nfp_pf *pf = devlink_priv(devlink);
struct nfp_eth_table_port eth_port;
+ unsigned int lanes;
int ret;
if (count < 2)
@@ -114,8 +115,12 @@ nfp_devlink_port_split(struct devlink *devlink, unsigned int port_index,
goto out;
}
- ret = nfp_devlink_set_lanes(pf, eth_port.index,
- eth_port.port_lanes / count);
+ /* Special case the 100G CXP -> 2x40G split */
+ lanes = eth_port.port_lanes / count;
+ if (eth_port.lanes == 10 && count == 2)
+ lanes = 8 / count;
+
+ ret = nfp_devlink_set_lanes(pf, eth_port.index, lanes);
out:
mutex_unlock(&pf->lock);
@@ -128,6 +133,7 @@ nfp_devlink_port_unsplit(struct devlink *devlink, unsigned int port_index,
{
struct nfp_pf *pf = devlink_priv(devlink);
struct nfp_eth_table_port eth_port;
+ unsigned int lanes;
int ret;
mutex_lock(&pf->lock);
@@ -143,7 +149,12 @@ nfp_devlink_port_unsplit(struct devlink *devlink, unsigned int port_index,
goto out;
}
- ret = nfp_devlink_set_lanes(pf, eth_port.index, eth_port.port_lanes);
+ /* Special case the 100G CXP -> 2x40G unsplit */
+ lanes = eth_port.port_lanes;
+ if (eth_port.port_lanes == 8)
+ lanes = 10;
+
+ ret = nfp_devlink_set_lanes(pf, eth_port.index, lanes);
out:
mutex_unlock(&pf->lock);
--
2.17.1
From: Suzuki K Poulose <[email protected]>
[ Upstream commit 8ab66cbe63aeaf9e5970fb4aaef1c660fca59321 ]
The matches() routine for a capability must honor the "scope"
passed to it and return the proper results.
i.e, when passed with SCOPE_LOCAL_CPU, it should check the
status of the capability on the current CPU. This is used by
verify_local_cpu_capabilities() on a late secondary CPU to make
sure that it's compliant with the established system features.
However, ARM64_HAS_CACHE_{IDC/DIC} always checks the system wide
registers and this could mean that a late secondary CPU could return
"true" (since the CPU hasn't updated the system wide registers yet)
and thus lead the system in an inconsistent state, where
the system assumes it has IDC/DIC feature, while the new CPU
doesn't.
Fixes: commit 6ae4b6e0578886eb36 ("arm64: Add support for new control bits CTR_EL0.DIC and CTR_EL0.IDC")
Cc: Philip Elcan <[email protected]>
Cc: Shanker Donthineni <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Will Deacon <[email protected]>
Signed-off-by: Suzuki K Poulose <[email protected]>
Signed-off-by: Catalin Marinas <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm64/kernel/cpufeature.c | 22 ++++++++++++++++++----
1 file changed, 18 insertions(+), 4 deletions(-)
diff --git a/arch/arm64/kernel/cpufeature.c b/arch/arm64/kernel/cpufeature.c
index e238b7932096..93f69d82225d 100644
--- a/arch/arm64/kernel/cpufeature.c
+++ b/arch/arm64/kernel/cpufeature.c
@@ -848,15 +848,29 @@ static bool has_no_fpsimd(const struct arm64_cpu_capabilities *entry, int __unus
}
static bool has_cache_idc(const struct arm64_cpu_capabilities *entry,
- int __unused)
+ int scope)
{
- return read_sanitised_ftr_reg(SYS_CTR_EL0) & BIT(CTR_IDC_SHIFT);
+ u64 ctr;
+
+ if (scope == SCOPE_SYSTEM)
+ ctr = arm64_ftr_reg_ctrel0.sys_val;
+ else
+ ctr = read_cpuid_cachetype();
+
+ return ctr & BIT(CTR_IDC_SHIFT);
}
static bool has_cache_dic(const struct arm64_cpu_capabilities *entry,
- int __unused)
+ int scope)
{
- return read_sanitised_ftr_reg(SYS_CTR_EL0) & BIT(CTR_DIC_SHIFT);
+ u64 ctr;
+
+ if (scope == SCOPE_SYSTEM)
+ ctr = arm64_ftr_reg_ctrel0.sys_val;
+ else
+ ctr = read_cpuid_cachetype();
+
+ return ctr & BIT(CTR_DIC_SHIFT);
}
#ifdef CONFIG_UNMAP_KERNEL_AT_EL0
--
2.17.1
From: Haiyang Zhang <[email protected]>
[ Upstream commit 005479556197f80139771960dda0dfdcd2d2aad5 ]
The VF device's serial number is saved as a string in PCI slot's
kobj name, not the slot->number. This patch corrects the netvsc
driver, so the VF device can be successfully paired with synthetic
NIC.
Fixes: 00d7ddba1143 ("hv_netvsc: pair VF based on serial number")
Reported-by: Vitaly Kuznetsov <[email protected]>
Signed-off-by: Haiyang Zhang <[email protected]>
Reviewed-by: Stephen Hemminger <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/hyperv/netvsc_drv.c | 15 +++++++++++----
1 file changed, 11 insertions(+), 4 deletions(-)
diff --git a/drivers/net/hyperv/netvsc_drv.c b/drivers/net/hyperv/netvsc_drv.c
index 3af6d8d15233..1c37a821895b 100644
--- a/drivers/net/hyperv/netvsc_drv.c
+++ b/drivers/net/hyperv/netvsc_drv.c
@@ -2022,14 +2022,15 @@ static void netvsc_vf_setup(struct work_struct *w)
rtnl_unlock();
}
-/* Find netvsc by VMBus serial number.
- * The PCI hyperv controller records the serial number as the slot.
+/* Find netvsc by VF serial number.
+ * The PCI hyperv controller records the serial number as the slot kobj name.
*/
static struct net_device *get_netvsc_byslot(const struct net_device *vf_netdev)
{
struct device *parent = vf_netdev->dev.parent;
struct net_device_context *ndev_ctx;
struct pci_dev *pdev;
+ u32 serial;
if (!parent || !dev_is_pci(parent))
return NULL; /* not a PCI device */
@@ -2040,16 +2041,22 @@ static struct net_device *get_netvsc_byslot(const struct net_device *vf_netdev)
return NULL;
}
+ if (kstrtou32(pci_slot_name(pdev->slot), 10, &serial)) {
+ netdev_notice(vf_netdev, "Invalid vf serial:%s\n",
+ pci_slot_name(pdev->slot));
+ return NULL;
+ }
+
list_for_each_entry(ndev_ctx, &netvsc_dev_list, list) {
if (!ndev_ctx->vf_alloc)
continue;
- if (ndev_ctx->vf_serial == pdev->slot->number)
+ if (ndev_ctx->vf_serial == serial)
return hv_get_drvdata(ndev_ctx->device_ctx);
}
netdev_notice(vf_netdev,
- "no netdev found for slot %u\n", pdev->slot->number);
+ "no netdev found for vf serial:%u\n", serial);
return NULL;
}
--
2.17.1
From: Paolo Abeni <[email protected]>
[ Upstream commit cb20f2d2c0507d60d94ef896991e95708f051dd1 ]
The commit 2eb0f624b709 ("netfilter: add NAT support for shifted
portmap ranges") did not set the checkentry/destroy callbacks for
the newly added DNAT target. As a result, rulesets using only
such nat targets are not effective, as the relevant conntrack hooks
are not enabled.
The above affect also nft_compat rulesets.
Fix the issue adding the missing initializers.
Fixes: 2eb0f624b709 ("netfilter: add NAT support for shifted portmap ranges")
Signed-off-by: Paolo Abeni <[email protected]>
Signed-off-by: Pablo Neira Ayuso <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/netfilter/xt_nat.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/net/netfilter/xt_nat.c b/net/netfilter/xt_nat.c
index 8af9707f8789..ac91170fc8c8 100644
--- a/net/netfilter/xt_nat.c
+++ b/net/netfilter/xt_nat.c
@@ -216,6 +216,8 @@ static struct xt_target xt_nat_target_reg[] __read_mostly = {
{
.name = "DNAT",
.revision = 2,
+ .checkentry = xt_nat_checkentry,
+ .destroy = xt_nat_destroy,
.target = xt_dnat_target_v2,
.targetsize = sizeof(struct nf_nat_range2),
.table = "nat",
--
2.17.1
From: Omar Sandoval <[email protected]>
[ Upstream commit 1448a2a5360ae06f25e2edc61ae070dff5c0beb4 ]
If we fail to allocate the request queue for a disk, we still need to
free that disk, not just the previous ones. Additionally, we need to
cleanup the previous request queues.
Signed-off-by: Omar Sandoval <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/block/swim.c | 13 +++++++++++--
1 file changed, 11 insertions(+), 2 deletions(-)
diff --git a/drivers/block/swim.c b/drivers/block/swim.c
index 0e31884a9519..cbe909c51847 100644
--- a/drivers/block/swim.c
+++ b/drivers/block/swim.c
@@ -887,8 +887,17 @@ static int swim_floppy_init(struct swim_priv *swd)
exit_put_disks:
unregister_blkdev(FLOPPY_MAJOR, "fd");
- while (drive--)
- put_disk(swd->unit[drive].disk);
+ do {
+ struct gendisk *disk = swd->unit[drive].disk;
+
+ if (disk) {
+ if (disk->queue) {
+ blk_cleanup_queue(disk->queue);
+ disk->queue = NULL;
+ }
+ put_disk(disk);
+ }
+ } while (drive--);
return err;
}
--
2.17.1
From: Omar Sandoval <[email protected]>
[ Upstream commit 71327f547ee3a46ec5c39fdbbd268401b2578d0e ]
Move queue allocation next to disk allocation to fix a couple of issues:
- If add_disk() hasn't been called, we should clear disk->queue before
calling put_disk().
- If we fail to allocate a request queue, we still need to put all of
the disks, not just the ones that we allocated queues for.
Signed-off-by: Omar Sandoval <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/block/ataflop.c | 25 +++++++++++++++----------
1 file changed, 15 insertions(+), 10 deletions(-)
diff --git a/drivers/block/ataflop.c b/drivers/block/ataflop.c
index dfb2c2622e5a..822e3060d834 100644
--- a/drivers/block/ataflop.c
+++ b/drivers/block/ataflop.c
@@ -1935,6 +1935,11 @@ static int __init atari_floppy_init (void)
unit[i].disk = alloc_disk(1);
if (!unit[i].disk)
goto Enomem;
+
+ unit[i].disk->queue = blk_init_queue(do_fd_request,
+ &ataflop_lock);
+ if (!unit[i].disk->queue)
+ goto Enomem;
}
if (UseTrackbuffer < 0)
@@ -1966,10 +1971,6 @@ static int __init atari_floppy_init (void)
sprintf(unit[i].disk->disk_name, "fd%d", i);
unit[i].disk->fops = &floppy_fops;
unit[i].disk->private_data = &unit[i];
- unit[i].disk->queue = blk_init_queue(do_fd_request,
- &ataflop_lock);
- if (!unit[i].disk->queue)
- goto Enomem;
set_capacity(unit[i].disk, MAX_DISK_SIZE * 2);
add_disk(unit[i].disk);
}
@@ -1984,13 +1985,17 @@ static int __init atari_floppy_init (void)
return 0;
Enomem:
- while (i--) {
- struct request_queue *q = unit[i].disk->queue;
+ do {
+ struct gendisk *disk = unit[i].disk;
- put_disk(unit[i].disk);
- if (q)
- blk_cleanup_queue(q);
- }
+ if (disk) {
+ if (disk->queue) {
+ blk_cleanup_queue(disk->queue);
+ disk->queue = NULL;
+ }
+ put_disk(unit[i].disk);
+ }
+ } while (i--);
unregister_blkdev(FLOPPY_MAJOR, "fd");
return -ENOMEM;
--
2.17.1
On 10/31/2018 07:03 PM, Sasha Levin wrote:
> From: Prarit Bhargava <[email protected]>
>
> [ Upstream commit f69ffc5d3db8f1f03fd6d1df5930f9a1fbd787b6 ]
>
> cpupower crashes on VMWare guests. The guests have the AMD PStateDef MSR
> (0xC0010064 + state number) set to zero. As a result fid and did are zero
> and the crash occurs because of a divide by zero (cof = fid/did). This
> can be prevented by checking the enable bit in the PStateDef MSR before
> calculating cof. By doing this the value of pstate[i] remains zero and
> the value can be tested before displaying the active Pstates.
>
> Check the enable bit in the PstateDef register for all supported families
> and only print out enabled Pstates.
>
Hi Sasha,
This patch, f69ffc5d3db8, depends on 8c22e2f69592 ("cpupower: Fix AMD Family
0x17 msr_pstate size"). Without 8c22e2f69592 the patch below will always read a
value of "0" and not output the correct data.
8c22e2f69592 must be applied to any stable branch that f69ffc5d3db8 is applied to.
P.
> Signed-off-by: Prarit Bhargava <[email protected]>
> Cc: Shuah Khan <[email protected]>
> Cc: Stafford Horne <[email protected]>
> Signed-off-by: Shuah Khan (Samsung OSG) <[email protected]>
> Signed-off-by: Sasha Levin <[email protected]>
> ---
> tools/power/cpupower/utils/cpufreq-info.c | 2 ++
> tools/power/cpupower/utils/helpers/amd.c | 5 +++++
> 2 files changed, 7 insertions(+)
>
> diff --git a/tools/power/cpupower/utils/cpufreq-info.c b/tools/power/cpupower/utils/cpufreq-info.c
> index df43cd45d810..ccd08dd00996 100644
> --- a/tools/power/cpupower/utils/cpufreq-info.c
> +++ b/tools/power/cpupower/utils/cpufreq-info.c
> @@ -200,6 +200,8 @@ static int get_boost_mode(unsigned int cpu)
> printf(_(" Boost States: %d\n"), b_states);
> printf(_(" Total States: %d\n"), pstate_no);
> for (i = 0; i < pstate_no; i++) {
> + if (!pstates[i])
> + continue;
> if (i < b_states)
> printf(_(" Pstate-Pb%d: %luMHz (boost state)"
> "\n"), i, pstates[i]);
> diff --git a/tools/power/cpupower/utils/helpers/amd.c b/tools/power/cpupower/utils/helpers/amd.c
> index bb41cdd0df6b..58d23997424d 100644
> --- a/tools/power/cpupower/utils/helpers/amd.c
> +++ b/tools/power/cpupower/utils/helpers/amd.c
> @@ -119,6 +119,11 @@ int decode_pstates(unsigned int cpu, unsigned int cpu_family,
> }
> if (read_msr(cpu, MSR_AMD_PSTATE + i, &pstate.val))
> return -1;
> + if ((cpu_family == 0x17) && (!pstate.fam17h_bits.en))
> + continue;
> + else if (!pstate.bits.en)
> + continue;
> +
> pstates[i] = get_cof(cpu_family, pstate);
> }
> *no = i;
>
On Thu, Nov 01, 2018 at 07:43:35AM -0400, Prarit Bhargava wrote:
>
>
>On 10/31/2018 07:03 PM, Sasha Levin wrote:
>> From: Prarit Bhargava <[email protected]>
>>
>> [ Upstream commit f69ffc5d3db8f1f03fd6d1df5930f9a1fbd787b6 ]
>>
>> cpupower crashes on VMWare guests. The guests have the AMD PStateDef MSR
>> (0xC0010064 + state number) set to zero. As a result fid and did are zero
>> and the crash occurs because of a divide by zero (cof = fid/did). This
>> can be prevented by checking the enable bit in the PStateDef MSR before
>> calculating cof. By doing this the value of pstate[i] remains zero and
>> the value can be tested before displaying the active Pstates.
>>
>> Check the enable bit in the PstateDef register for all supported families
>> and only print out enabled Pstates.
>>
>
>Hi Sasha,
>
>This patch, f69ffc5d3db8, depends on 8c22e2f69592 ("cpupower: Fix AMD Family
>0x17 msr_pstate size"). Without 8c22e2f69592 the patch below will always read a
>value of "0" and not output the correct data.
>
>8c22e2f69592 must be applied to any stable branch that f69ffc5d3db8 is applied to.
I'll grab it too, thank you.
--
Thanks,
Sasha
Sasha Levin <[email protected]> 于2018年11月1日周四 上午12:45写道：
>
> From: Shaohua Li <[email protected]>
>
> [ Upstream commit d595567dc4f0c1d90685ec1e2e296e2cad2643ac ]
>
> If we change the number of array's device after device is removed from array,
> then add the device back to array, we can see that device is added as active
> role instead of spare which we expected.
>
> Please see the below link for details:
> https://marc.info/?l=linux-raid&m=153736982015076&w=2
>
> This is caused by that we prefer to use device's previous role which is
> recorded by saved_raid_disk, but we should respect the new number of
> conf->raid_disks since it could be changed after device is removed.
>
> Reported-by: Gioh Kim <[email protected]>
> Tested-by: Gioh Kim <[email protected]>
> Acked-by: Guoqing Jiang <[email protected]>9e753ba9b9b405e3902d9f08aec5f2ea58a0c317
> Signed-off-by: Shaohua Li <[email protected]>
> Signed-off-by: Sasha Levin <[email protected]>
Hi Sasha,
This patch breaks linear hotadd please also include commit
9e753ba9b9b405e3902d9f08aec5f2ea58a0c317
MD: fix invalid stored role for a disk - try2
Regards,
Jack Wang
> ---
> drivers/md/md.c | 4 ++++
> 1 file changed, 4 insertions(+)
>
> diff --git a/drivers/md/md.c b/drivers/md/md.c
> index 8668793262d0..85459c17cc60 100644
> --- a/drivers/md/md.c
> +++ b/drivers/md/md.c
> @@ -1776,6 +1776,10 @@ static int super_1_validate(struct mddev *mddev, struct md_rdev *rdev)
> } else
> set_bit(In_sync, &rdev->flags);
> rdev->raid_disk = role;
> + if (role >= mddev->raid_disks) {
> + rdev->saved_raid_disk = -1;
> + rdev->raid_disk = -1;
> + }
> break;
> }
> if (sb->devflags & WriteMostly1)
> --
> 2.17.1
>
On Tue, Nov 06, 2018 at 08:37:32AM +0100, Jack Wang wrote:
>Sasha Levin <[email protected]> 于2018年11月1日周四 上午12:45写道：
>>
>> From: Shaohua Li <[email protected]>
>>
>> [ Upstream commit d595567dc4f0c1d90685ec1e2e296e2cad2643ac ]
>>
>> If we change the number of array's device after device is removed from array,
>> then add the device back to array, we can see that device is added as active
>> role instead of spare which we expected.
>>
>> Please see the below link for details:
>> https://marc.info/?l=linux-raid&m=153736982015076&w=2
>>
>> This is caused by that we prefer to use device's previous role which is
>> recorded by saved_raid_disk, but we should respect the new number of
>> conf->raid_disks since it could be changed after device is removed.
>>
>> Reported-by: Gioh Kim <[email protected]>
>> Tested-by: Gioh Kim <[email protected]>
>> Acked-by: Guoqing Jiang <[email protected]>9e753ba9b9b405e3902d9f08aec5f2ea58a0c317
>> Signed-off-by: Shaohua Li <[email protected]>
>> Signed-off-by: Sasha Levin <[email protected]>
>Hi Sasha,
>
>This patch breaks linear hotadd please also include commit
>9e753ba9b9b405e3902d9f08aec5f2ea58a0c317
>MD: fix invalid stored role for a disk - try2
I'll queue it up, thanks Jack!
--
Thanks,
Sasha