This is the start of the stable review cycle for the 4.4.163 release.
There are 114 patches in this series, all will be posted as a response
to this one. If anyone has any issues with these being applied, please
let me know.
Responses should be made by Sat Nov 10 21:50:28 UTC 2018.
Anything received after that time might be too late.
The whole patch series can be found in one patch at:
https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.4.163-rc1.gz
or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.4.y
and the diffstat can be found below.
thanks,
greg k-h
-------------
Pseudo-Shortlog of commits:
Greg Kroah-Hartman <[email protected]>
Linux 4.4.163-rc1
Nathan Chancellor <[email protected]>
x86/time: Correct the attribute on jiffies' definition
Peter Zijlstra <[email protected]>
x86/percpu: Fix this_cpu_read()
Phil Auld <[email protected]>
sched/fair: Fix throttle_list starvation with low CFS quota
Mikhail Nikiforov <[email protected]>
Input: elan_i2c - add ACPI ID for Lenovo IdeaPad 330-15IGM
Alan Stern <[email protected]>
USB: fix the usbfs flag sanitization for control transfers
Gustavo A. R. Silva <[email protected]>
usb: gadget: storage: Fix Spectre v1 vulnerability
Tobias Herzog <[email protected]>
cdc-acm: correct counting of UART states in serial state notification
Gustavo A. R. Silva <[email protected]>
IB/ucm: Fix Spectre v1 vulnerability
Gustavo A. R. Silva <[email protected]>
RDMA/ucma: Fix Spectre v1 vulnerability
Gustavo A. R. Silva <[email protected]>
ptp: fix Spectre v1 vulnerability
Al Viro <[email protected]>
cachefiles: fix the race between cachefiles_bury_object() and rmdir(2)
Ard Biesheuvel <[email protected]>
ahci: don't ignore result code of ahci_reset_controller()
Jia-Ju Bai <[email protected]>
crypto: shash - Fix a sleep-in-atomic bug in shash_setkey_unaligned
Linus Torvalds <[email protected]>
mremap: properly flush TLB before releasing the page
Ido Schimmel <[email protected]>
rtnetlink: Disallow FDB configuration for non-Ethernet device
Jason Wang <[email protected]>
vhost: Fix Spectre V1 vulnerability
Cong Wang <[email protected]>
net: drop skb on failure in ip_check_defrag()
Marcelo Ricardo Leitner <[email protected]>
sctp: fix race on sctp_id2asoc
Heiner Kallweit <[email protected]>
r8169: fix NAPI handling under high load
Niklas Cassel <[email protected]>
net: stmmac: Fix stmmac_mdio_reset() when building stmmac as modules
Wenwen Wang <[email protected]>
net: socket: fix a missing-check bug
Jakub Kicinski <[email protected]>
net: sched: gred: pass the right attribute to gred_change_table_def()
David Ahern <[email protected]>
net/ipv6: Fix index counter for unicast addresses in in6_dump_addrs
Stefano Brivio <[email protected]>
ipv6/ndisc: Preserve IPv6 control buffer if protocol error handlers are called
Eric Dumazet <[email protected]>
ipv6: mcast: fix a use-after-free in inet6_mc_check
Nikolay Aleksandrov <[email protected]>
net: bridge: remove ipv6 zero address check in mcast queries
Hangbin Liu <[email protected]>
bridge: do not add port to router list when receives query with source 0.0.0.0
Rasmus Villemoes <[email protected]>
perf tools: Disable parallelism for 'make clean'
Kimmo Rautkoski <[email protected]>
mtd: spi-nor: Add support for is25wp series chips
Khazhismel Kumykov <[email protected]>
fs/fat/fatent.c: add cond_resched() to fat_count_free_clusters()
Sascha Hauer <[email protected]>
ARM: dts: imx53-qsb: disable 1.2GHz OPP
Maciej W. Rozycki <[email protected]>
MIPS: DEC: Fix an int-handler.S CPU_DADDI_WORKAROUNDS regression
Christian Grönke <[email protected]>
igb: Remove superfluous reset to PHY and page 0 selection
Matt Redfearn <[email protected]>
MIPS: microMIPS: Fix decoding of swsp16 instruction
Raghava Aditya Renukunta <[email protected]>
scsi: aacraid: Fix typo in blink status
Paolo Abeni <[email protected]>
bonding: avoid defaulting hard_header_len to ETH_HLEN on slave removal
Gustavo A. R. Silva <[email protected]>
PM / devfreq: tegra: fix error return code in tegra_devfreq_probe()
Gustavo A. R. Silva <[email protected]>
ASoC: spear: fix error return code in spdif_in_probe()
Gustavo A. R. Silva <[email protected]>
spi: xlp: fix error return code in xlp_spi_probe()
Gustavo A. R. Silva <[email protected]>
spi/bcm63xx: fix error return code in bcm63xx_spi_probe()
Matt Redfearn <[email protected]>
MIPS: Handle non word sized instructions when examining frame
Gustavo A. R. Silva <[email protected]>
spi/bcm63xx-hspi: fix error return code in bcm63xx_hsspi_probe()
Gustavo A. R. Silva <[email protected]>
usb: dwc3: omap: fix error return code in dwc3_omap_probe()
Gustavo A. R. Silva <[email protected]>
usb: ehci-omap: fix error return code in ehci_hcd_omap_probe()
Gustavo A. R. Silva <[email protected]>
usb: imx21-hcd: fix error return code in imx21_probe()
Gustavo A. R. Silva <[email protected]>
gpio: msic: fix error return code in platform_msic_gpio_probe()
David S. Miller <[email protected]>
sparc64: Fix exception handling in UltraSPARC-III memcpy.
Gustavo A. R. Silva <[email protected]>
gpu: host1x: fix error return code in host1x_probe()
Mike Kravetz <[email protected]>
sparc64 mm: Fix more TSB sizing issues
Gustavo A. R. Silva <[email protected]>
video: fbdev: pxa3xx_gcu: fix error return code in pxa3xx_gcu_probe()
Gustavo A. R. Silva <[email protected]>
tty: serial: sprd: fix error return code in sprd_probe()
Guillaume Nault <[email protected]>
l2tp: hold socket before dropping lock in l2tp_ip{, 6}_recv()
Peter S. Housel <[email protected]>
brcmfmac: Fix glom_skb leak in brcmf_sdiod_recv_chain
Alexander Duyck <[email protected]>
gro: Allow tunnel stacking in the case of FOU/GUE
Nicolas Dichtel <[email protected]>
vti6: flush x-netns xfrm cache when vti interface is removed
Takashi Iwai <[email protected]>
ALSA: timer: Fix zero-division by continue of uninitialized instance
Mark Rustad <[email protected]>
ixgbe: Correct X550EM_x revision check
Emil Tantilov <[email protected]>
ixgbe: fix RSS limit for X550
Tariq Toukan <[email protected]>
net/mlx5e: Correctly handle RSS indirection table when changing number of channels
Tariq Toukan <[email protected]>
net/mlx5e: Fix LRO modify
William Dauchy <[email protected]>
ixgbevf: Fix handling of NAPI budget when multiple queues are enabled per vector
Ashish Samant <[email protected]>
fuse: Dont call set_page_dirty_lock() for ITER_BVEC pages for async_dio
Pavel Roskin <[email protected]>
drm/nouveau/fbcon: fix oops without fbdev emulation
Daniel Borkmann <[email protected]>
bpf: generally move prog destruction to RCU deferral
Alan Stern <[email protected]>
usb-storage: fix bogus hardware error messages for ATA pass-thru devices
WANG Cong <[email protected]>
sch_red: update backlog as well
Sowmini Varadhan <[email protected]>
sparc/pci: Refactor dev_archdata initialization into pci_init_dev_archdata
Ewan D. Milne <[email protected]>
scsi: Add STARGET_CREATED_REMOVE state to scsi_target_state
Jonathan Basseri <[email protected]>
xfrm: Clear sk_dst_cache when applying per-socket policy.
Catalin Marinas <[email protected]>
arm64: Fix potential race with hardware DBM in ptep_set_access_flags()
Mark Syms <[email protected]>
CIFS: handle guest access errors to Windows shares
Geert Uytterhoeven <[email protected]>
ASoC: wm8940: Enable cache usage to fix crashes on resume
Geert Uytterhoeven <[email protected]>
ASoC: ak4613: Enable cache usage to fix crashes on resume
Maciej W. Rozycki <[email protected]>
MIPS: Fix FCSR Cause bit handling for correct SIGFPE issue
Vladis Dronov <[email protected]>
usbvision: revert commit 588afcc1
Alexander Shishkin <[email protected]>
perf/core: Don't leak event in the syscall error path
Raghava Aditya Renukunta <[email protected]>
aacraid: Start adapter after updating number of MSIX vectors
Prarit Bhargava <[email protected]>
x86/PCI: Mark Broadwell-EP Home Agent 1 as having non-compliant BARs
Jarkko Sakkinen <[email protected]>
tpm: fix: return rc when devm_add_action() fails
Arnd Bergmann <[email protected]>
thermal: allow u8500-thermal driver to be a module
Arnd Bergmann <[email protected]>
thermal: allow spear-thermal driver to be a module
Jeff Mahoney <[email protected]>
btrfs: don't create or leak aliased root while cleaning up orphans
Peter Zijlstra <[email protected]>
sched/cgroup: Fix cgroup entity load tracking tear-down
Florian Fainelli <[email protected]>
um: Avoid longjmp/setjmp symbol clashes with libpthread.a
Eric Dumazet <[email protected]>
ipv6: orphan skbs in reassembly unit
Eugenia Emantayev <[email protected]>
net/mlx4_en: Resolve dividing by zero in 32-bit system
Mateusz Jurczyk <[email protected]>
af_iucv: Move sockaddr length checks to before accessing sa_family in bind and connect handlers
Andrey Ryabinin <[email protected]>
radix-tree: fix radix_tree_iter_retry() for tagged iterators.
Jiri Kosina <[email protected]>
btrfs: cleaner_kthread() doesn't need explicit freeze
Matt Fleming <[email protected]>
x86/mm/pat: Prevent hang during boot when mapping pages
Srinivas Kandagatla <[email protected]>
ARM: dts: apq8064: add ahci ports-implemented mask
Steven Rostedt (Red Hat) <[email protected]>
tracing: Skip more functions when doing stack tracing of events
Paul Bolle <[email protected]>
ser_gigaset: use container_of() instead of detour
David Herrmann <[email protected]>
net: drop write-only stack variable
Johannes Berg <[email protected]>
ipv6: suppress sparse warnings in IP6_ECN_set_ce()
Eric Biggers <[email protected]>
KEYS: put keyring if install_session_keyring_to_cred() fails
Wenwen Wang <[email protected]>
net: cxgb3_main: fix a missing-check bug
Jiri Olsa <[email protected]>
perf/ring_buffer: Prevent concurent ring buffer access
Florian Fainelli <[email protected]>
smsc95xx: Check for Wake-on-LAN modes
Florian Fainelli <[email protected]>
smsc75xx: Check for Wake-on-LAN modes
Florian Fainelli <[email protected]>
r8152: Check for supported Wake-on-LAN Modes
Florian Fainelli <[email protected]>
sr9800: Check for supported Wake-on-LAN modes
Florian Fainelli <[email protected]>
lan78xx: Check for supported Wake-on-LAN modes
Florian Fainelli <[email protected]>
ax88179_178a: Check for supported Wake-on-LAN modes
Florian Fainelli <[email protected]>
asix: Check for supported Wake-on-LAN modes
Lubomir Rintel <[email protected]>
pxa168fb: prepare the clock
Matias Karhumaa <[email protected]>
Bluetooth: SMP: fix crash in unpairing
Martin Willi <[email protected]>
mac80211_hwsim: do not omit multicast announce of first added radio
Sean Tranchetti <[email protected]>
xfrm: validate template mode
Thomas Petazzoni <[email protected]>
ARM: 8799/1: mm: fix pci_ioremap_io() offset check
Andrei Otcheretianski <[email protected]>
cfg80211: reg: Init wiphy_idx in regulatory_hint_core()
Andrei Otcheretianski <[email protected]>
mac80211: Always report TX status
Thadeu Lima de Souza Cascardo <[email protected]>
xfrm6: call kfree_skb when skb is toobig
Steffen Klassert <[email protected]>
xfrm: Validate address prefix lengths in the xfrm selector.
-------------
Diffstat:
Makefile | 4 +-
arch/arm/boot/dts/imx53-qsb-common.dtsi | 11 ++++
arch/arm/boot/dts/qcom-apq8064.dtsi | 3 +-
arch/arm/mm/ioremap.c | 2 +-
arch/arm64/mm/fault.c | 15 ++---
arch/mips/dec/int-handler.S | 34 ++--------
arch/mips/include/asm/fpu_emulator.h | 13 ++++
arch/mips/include/asm/switch_to.h | 18 ++++++
arch/mips/include/uapi/asm/inst.h | 2 +-
arch/mips/kernel/mips-r2-to-r6-emul.c | 10 +--
arch/mips/kernel/process.c | 11 ++--
arch/mips/kernel/ptrace.c | 7 +--
arch/mips/kernel/traps.c | 72 ++++++++++++----------
arch/sparc/include/asm/page_64.h | 1 +
arch/sparc/kernel/pci.c | 29 ++++++---
arch/sparc/lib/U3memcpy.S | 4 +-
arch/sparc/mm/fault_64.c | 1 +
arch/sparc/mm/tlb.c | 35 +++++++++--
arch/sparc/mm/tsb.c | 18 ++++--
arch/um/Makefile | 4 ++
arch/x86/include/asm/percpu.h | 8 +--
arch/x86/kernel/time.c | 2 +-
arch/x86/mm/pageattr.c | 21 ++++---
arch/x86/pci/fixup.c | 7 +++
arch/x86/um/setjmp_32.S | 16 ++---
arch/x86/um/setjmp_64.S | 16 ++---
crypto/shash.c | 2 +-
drivers/ata/ahci.c | 5 +-
drivers/char/tpm/tpm-chip.c | 6 +-
drivers/devfreq/tegra-devfreq.c | 6 +-
drivers/gpio/gpio-msic.c | 4 +-
drivers/gpu/drm/nouveau/nouveau_fbcon.c | 7 ++-
drivers/gpu/host1x/dev.c | 4 +-
drivers/infiniband/core/ucm.c | 3 +
drivers/infiniband/core/ucma.c | 3 +
drivers/input/mouse/elan_i2c_core.c | 1 +
drivers/isdn/gigaset/ser-gigaset.c | 9 +--
drivers/media/usb/usbvision/usbvision-video.c | 7 ---
drivers/mfd/db8500-prcmu.c | 3 +
drivers/mtd/spi-nor/spi-nor.c | 6 ++
drivers/net/bonding/bond_main.c | 2 +-
drivers/net/ethernet/chelsio/cxgb3/cxgb3_main.c | 17 +++++
drivers/net/ethernet/intel/igb/e1000_82575.c | 11 ----
drivers/net/ethernet/intel/ixgbe/ixgbe.h | 2 +-
drivers/net/ethernet/intel/ixgbe/ixgbe_type.h | 2 +-
drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c | 9 +--
drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c | 2 +
drivers/net/ethernet/mellanox/mlx4/en_clock.c | 5 +-
drivers/net/ethernet/mellanox/mlx5/core/en.h | 2 +
.../net/ethernet/mellanox/mlx5/core/en_ethtool.c | 2 +
drivers/net/ethernet/mellanox/mlx5/core/en_main.c | 30 ++++++---
drivers/net/ethernet/realtek/r8169.c | 8 +--
drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c | 2 +-
drivers/net/usb/asix_common.c | 3 +
drivers/net/usb/ax88179_178a.c | 3 +
drivers/net/usb/lan78xx.c | 17 ++---
drivers/net/usb/r8152.c | 3 +
drivers/net/usb/smsc75xx.c | 3 +
drivers/net/usb/smsc95xx.c | 3 +
drivers/net/usb/sr9800.c | 3 +
drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c | 7 +--
drivers/net/wireless/mac80211_hwsim.c | 3 +-
drivers/ptp/ptp_chardev.c | 4 ++
drivers/scsi/aacraid/linit.c | 2 +-
drivers/scsi/aacraid/src.c | 2 +-
drivers/scsi/scsi_scan.c | 5 +-
drivers/scsi/scsi_sysfs.c | 8 ++-
drivers/spi/spi-bcm63xx-hsspi.c | 4 +-
drivers/spi/spi-bcm63xx.c | 4 +-
drivers/spi/spi-xlp.c | 4 +-
drivers/thermal/Kconfig | 6 +-
drivers/tty/serial/sprd_serial.c | 4 +-
drivers/usb/class/cdc-acm.c | 14 ++---
drivers/usb/core/devio.c | 4 +-
drivers/usb/dwc3/dwc3-omap.c | 4 +-
drivers/usb/gadget/function/f_mass_storage.c | 3 +
drivers/usb/host/ehci-omap.c | 4 +-
drivers/usb/host/imx21-hcd.c | 6 +-
drivers/usb/storage/transport.c | 14 ++++-
drivers/vhost/vhost.c | 2 +
drivers/video/fbdev/pxa168fb.c | 6 +-
drivers/video/fbdev/pxa3xx-gcu.c | 4 +-
fs/btrfs/disk-io.c | 6 +-
fs/btrfs/disk-io.h | 2 +
fs/btrfs/root-tree.c | 27 +++++---
fs/cachefiles/namei.c | 2 +-
fs/cifs/connect.c | 3 +
fs/fat/fatent.c | 1 +
fs/fuse/file.c | 6 +-
fs/fuse/fuse_i.h | 1 +
include/linux/bpf.h | 5 --
include/linux/radix-tree.h | 1 +
include/net/inet_ecn.h | 3 +-
include/scsi/scsi_device.h | 1 +
kernel/bpf/arraymap.c | 4 +-
kernel/bpf/syscall.c | 13 +---
kernel/events/core.c | 5 +-
kernel/sched/core.c | 4 +-
kernel/sched/fair.c | 59 ++++++++++++------
kernel/sched/sched.h | 4 +-
kernel/trace/trace.c | 19 +++++-
mm/huge_memory.c | 6 +-
mm/mremap.c | 21 +++++--
net/bluetooth/mgmt.c | 7 +--
net/bluetooth/smp.c | 29 +++++++--
net/bluetooth/smp.h | 3 +-
net/bridge/br_multicast.c | 9 ++-
net/core/rtnetlink.c | 10 +++
net/ipv4/fou.c | 16 +++++
net/ipv4/ip_fragment.c | 12 ++--
net/ipv6/addrconf.c | 6 +-
net/ipv6/ip6_vti.c | 31 ++++++++++
net/ipv6/mcast.c | 16 ++---
net/ipv6/ndisc.c | 3 +-
net/ipv6/netfilter/nf_conntrack_reasm.c | 1 +
net/ipv6/xfrm6_output.c | 2 +
net/iucv/af_iucv.c | 8 +--
net/l2tp/l2tp_ip.c | 11 ++--
net/l2tp/l2tp_ip6.c | 11 ++--
net/mac80211/status.c | 7 +--
net/sched/sch_gred.c | 2 +-
net/sched/sch_red.c | 4 ++
net/sctp/socket.c | 5 +-
net/socket.c | 11 +++-
net/unix/af_unix.c | 5 +-
net/wireless/reg.c | 1 +
net/xfrm/xfrm_state.c | 1 +
net/xfrm/xfrm_user.c | 15 +++++
security/keys/process_keys.c | 7 ++-
sound/core/timer.c | 14 +++++
sound/soc/codecs/ak4613.c | 1 +
sound/soc/codecs/wm8940.c | 1 +
sound/soc/spear/spdif_in.c | 6 +-
tools/perf/Makefile | 4 +-
134 files changed, 737 insertions(+), 388 deletions(-)
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 32bf94fb5c2ec4ec842152d0e5937cd4bb6738fa ]
XFRM mode parameters passed as part of the user templates
in the IP_XFRM_POLICY are never properly validated. Passing
values other than valid XFRM modes can cause stack-out-of-bounds
reads to occur later in the XFRM processing:
[ 140.535608] ================================================================
[ 140.543058] BUG: KASAN: stack-out-of-bounds in xfrm_state_find+0x17e4/0x1cc4
[ 140.550306] Read of size 4 at addr ffffffc0238a7a58 by task repro/5148
[ 140.557369]
[ 140.558927] Call trace:
[ 140.558936] dump_backtrace+0x0/0x388
[ 140.558940] show_stack+0x24/0x30
[ 140.558946] __dump_stack+0x24/0x2c
[ 140.558949] dump_stack+0x8c/0xd0
[ 140.558956] print_address_description+0x74/0x234
[ 140.558960] kasan_report+0x240/0x264
[ 140.558963] __asan_report_load4_noabort+0x2c/0x38
[ 140.558967] xfrm_state_find+0x17e4/0x1cc4
[ 140.558971] xfrm_resolve_and_create_bundle+0x40c/0x1fb8
[ 140.558975] xfrm_lookup+0x238/0x1444
[ 140.558977] xfrm_lookup_route+0x48/0x11c
[ 140.558984] ip_route_output_flow+0x88/0xc4
[ 140.558991] raw_sendmsg+0xa74/0x266c
[ 140.558996] inet_sendmsg+0x258/0x3b0
[ 140.559002] sock_sendmsg+0xbc/0xec
[ 140.559005] SyS_sendto+0x3a8/0x5a8
[ 140.559008] el0_svc_naked+0x34/0x38
[ 140.559009]
[ 140.592245] page dumped because: kasan: bad access detected
[ 140.597981] page_owner info is not active (free page?)
[ 140.603267]
[ 140.653503] ================================================================
Signed-off-by: Sean Tranchetti <[email protected]>
Signed-off-by: Steffen Klassert <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/xfrm/xfrm_user.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/net/xfrm/xfrm_user.c b/net/xfrm/xfrm_user.c
index c2e98dcba9fe..476f1fc6d655 100644
--- a/net/xfrm/xfrm_user.c
+++ b/net/xfrm/xfrm_user.c
@@ -1408,6 +1408,9 @@ static int validate_tmpl(int nr, struct xfrm_user_tmpl *ut, u16 family)
(ut[i].family != prev_family))
return -EINVAL;
+ if (ut[i].mode >= XFRM_MODE_MAX)
+ return -EINVAL;
+
prev_family = ut[i].family;
switch (ut[i].family) {
--
2.17.1
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 3a58ac65e2d7969bcdf1b6acb70fa4d12a88e53e ]
IO_SPACE_LIMIT is the ending address of the PCI IO space, i.e
something like 0xfffff (and not 0x100000).
Therefore, when offset = 0xf0000 is passed as argument, this function
fails even though the offset + SZ_64K fits below the
IO_SPACE_LIMIT. This makes the last chunk of 64 KB of the I/O space
not usable as it cannot be mapped.
This patch fixes that by substracing 1 to offset + SZ_64K, so that we
compare the addrss of the last byte of the I/O space against
IO_SPACE_LIMIT instead of the address of the first byte of what is
after the I/O space.
Fixes: c2794437091a4 ("ARM: Add fixed PCI i/o mapping")
Signed-off-by: Thomas Petazzoni <[email protected]>
Acked-by: Nicolas Pitre <[email protected]>
Signed-off-by: Russell King <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm/mm/ioremap.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/mm/ioremap.c b/arch/arm/mm/ioremap.c
index 0c81056c1dd7..2a3feb73de0b 100644
--- a/arch/arm/mm/ioremap.c
+++ b/arch/arm/mm/ioremap.c
@@ -460,7 +460,7 @@ void pci_ioremap_set_mem_type(int mem_type)
int pci_ioremap_io(unsigned int offset, phys_addr_t phys_addr)
{
- BUG_ON(offset + SZ_64K > IO_SPACE_LIMIT);
+ BUG_ON(offset + SZ_64K - 1 > IO_SPACE_LIMIT);
return ioremap_page_range(PCI_IO_VIRT_BASE + offset,
PCI_IO_VIRT_BASE + offset + SZ_64K,
--
2.17.1
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit be54f69c26193de31053190761e521903b89d098 ]
# echo 1 > options/stacktrace
# echo 1 > events/sched/sched_switch/enable
# cat trace
<idle>-0 [002] d..2 1982.525169: <stack trace>
=> save_stack_trace
=> __ftrace_trace_stack
=> trace_buffer_unlock_commit_regs
=> event_trigger_unlock_commit
=> trace_event_buffer_commit
=> trace_event_raw_event_sched_switch
=> __schedule
=> schedule
=> schedule_preempt_disabled
=> cpu_startup_entry
=> start_secondary
The above shows that we are seeing 6 functions before ever making it to the
caller of the sched_switch event.
# echo stacktrace > events/sched/sched_switch/trigger
# cat trace
<idle>-0 [002] d..3 2146.335208: <stack trace>
=> trace_event_buffer_commit
=> trace_event_raw_event_sched_switch
=> __schedule
=> schedule
=> schedule_preempt_disabled
=> cpu_startup_entry
=> start_secondary
The stacktrace trigger isn't as bad, because it adds its own skip to the
stacktracing, but still has two events extra.
One issue is that if the stacktrace passes its own "regs" then there should
be no addition to the skip, as the regs will not include the functions being
called. This was an issue that was fixed by commit 7717c6be6999 ("tracing:
Fix stacktrace skip depth in trace_buffer_unlock_commit_regs()" as adding
the skip number for kprobes made the probes not have any stack at all.
But since this is only an issue when regs is being used, a skip should be
added if regs is NULL. Now we have:
# echo 1 > options/stacktrace
# echo 1 > events/sched/sched_switch/enable
# cat trace
<idle>-0 [000] d..2 1297.676333: <stack trace>
=> __schedule
=> schedule
=> schedule_preempt_disabled
=> cpu_startup_entry
=> rest_init
=> start_kernel
=> x86_64_start_reservations
=> x86_64_start_kernel
# echo stacktrace > events/sched/sched_switch/trigger
# cat trace
<idle>-0 [002] d..3 1370.759745: <stack trace>
=> __schedule
=> schedule
=> schedule_preempt_disabled
=> cpu_startup_entry
=> start_secondary
And kprobes are not touched.
Reported-by: Peter Zijlstra <[email protected]>
Signed-off-by: Steven Rostedt <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
kernel/trace/trace.c | 19 ++++++++++++++++++-
1 file changed, 18 insertions(+), 1 deletion(-)
diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c
index e409ddce8754..1a47a64d623f 100644
--- a/kernel/trace/trace.c
+++ b/kernel/trace/trace.c
@@ -1757,7 +1757,17 @@ void trace_buffer_unlock_commit_regs(struct trace_array *tr,
{
__buffer_unlock_commit(buffer, event);
- ftrace_trace_stack(tr, buffer, flags, 0, pc, regs);
+ /*
+ * If regs is not set, then skip the following callers:
+ * trace_buffer_unlock_commit_regs
+ * event_trigger_unlock_commit
+ * trace_event_buffer_commit
+ * trace_event_raw_event_sched_switch
+ * Note, we can still get here via blktrace, wakeup tracer
+ * and mmiotrace, but that's ok if they lose a function or
+ * two. They are that meaningful.
+ */
+ ftrace_trace_stack(tr, buffer, flags, regs ? 0 : 4, pc, regs);
ftrace_trace_userstack(buffer, flags, pc);
}
EXPORT_SYMBOL_GPL(trace_buffer_unlock_commit_regs);
@@ -1815,6 +1825,13 @@ static void __ftrace_trace_stack(struct ring_buffer *buffer,
trace.nr_entries = 0;
trace.skip = skip;
+ /*
+ * Add two, for this function and the call to save_stack_trace()
+ * If regs is set, then these functions will not be in the way.
+ */
+ if (!regs)
+ trace.skip += 2;
+
/*
* Since events can happen in NMIs there's no safe way to
* use the per cpu ftrace_stacks. We reserve it and if an interrupt
--
2.17.1
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit e535ec0899d1fe52ec3a84c9bc03457ac67ad6f7 ]
There's a mixture of signed 32-bit and unsigned 32-bit and 64-bit data
types used for keeping track of how many pages have been mapped.
This leads to hangs during boot when mapping large numbers of pages
(multiple terabytes, as reported by Waiman) because those values are
interpreted as being negative.
commit 742563777e8d ("x86/mm/pat: Avoid truncation when converting
cpa->numpages to address") fixed one of those bugs, but there is
another lurking in __change_page_attr_set_clr().
Additionally, the return value type for the populate_*() functions can
return negative values when a large number of pages have been mapped,
triggering the error paths even though no error occurred.
Consistently use 64-bit types on 64-bit platforms when counting pages.
Even in the signed case this gives us room for regions 8PiB
(pebibytes) in size whilst still allowing the usual negative value
error checking idiom.
Reported-by: Waiman Long <[email protected]>
Cc: Ard Biesheuvel <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: Linus Torvalds <[email protected]>
CC: Theodore Ts'o <[email protected]>
Cc: Arnd Bergmann <[email protected]>
Cc: Greg Kroah-Hartman <[email protected]>
Cc: Scott J Norton <[email protected]>
Cc: Douglas Hatch <[email protected]>
Signed-off-by: Matt Fleming <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/x86/mm/pageattr.c | 21 +++++++++++----------
1 file changed, 11 insertions(+), 10 deletions(-)
diff --git a/arch/x86/mm/pageattr.c b/arch/x86/mm/pageattr.c
index 0e1dd7d47f05..26598e08666c 100644
--- a/arch/x86/mm/pageattr.c
+++ b/arch/x86/mm/pageattr.c
@@ -955,11 +955,11 @@ static void populate_pte(struct cpa_data *cpa,
}
}
-static int populate_pmd(struct cpa_data *cpa,
- unsigned long start, unsigned long end,
- unsigned num_pages, pud_t *pud, pgprot_t pgprot)
+static long populate_pmd(struct cpa_data *cpa,
+ unsigned long start, unsigned long end,
+ unsigned num_pages, pud_t *pud, pgprot_t pgprot)
{
- unsigned int cur_pages = 0;
+ long cur_pages = 0;
pmd_t *pmd;
pgprot_t pmd_pgprot;
@@ -1029,12 +1029,12 @@ static int populate_pmd(struct cpa_data *cpa,
return num_pages;
}
-static int populate_pud(struct cpa_data *cpa, unsigned long start, pgd_t *pgd,
- pgprot_t pgprot)
+static long populate_pud(struct cpa_data *cpa, unsigned long start, pgd_t *pgd,
+ pgprot_t pgprot)
{
pud_t *pud;
unsigned long end;
- int cur_pages = 0;
+ long cur_pages = 0;
pgprot_t pud_pgprot;
end = start + (cpa->numpages << PAGE_SHIFT);
@@ -1090,7 +1090,7 @@ static int populate_pud(struct cpa_data *cpa, unsigned long start, pgd_t *pgd,
/* Map trailing leftover */
if (start < end) {
- int tmp;
+ long tmp;
pud = pud_offset(pgd, start);
if (pud_none(*pud))
@@ -1116,7 +1116,7 @@ static int populate_pgd(struct cpa_data *cpa, unsigned long addr)
pgprot_t pgprot = __pgprot(_KERNPG_TABLE);
pud_t *pud = NULL; /* shut up gcc */
pgd_t *pgd_entry;
- int ret;
+ long ret;
pgd_entry = cpa->pgd + pgd_index(addr);
@@ -1351,7 +1351,8 @@ static int cpa_process_alias(struct cpa_data *cpa)
static int __change_page_attr_set_clr(struct cpa_data *cpa, int checkalias)
{
- int ret, numpages = cpa->numpages;
+ unsigned long numpages = cpa->numpages;
+ int ret;
while (numpages) {
/*
--
2.17.1
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit e3c42b61ff813921ba58cfc0019e3fd63f651190 ]
Verify that the caller-provided sockaddr structure is large enough to
contain the sa_family field, before accessing it in bind() and connect()
handlers of the AF_IUCV socket. Since neither syscall enforces a minimum
size of the corresponding memory region, very short sockaddrs (zero or
one byte long) result in operating on uninitialized memory while
referencing .sa_family.
Fixes: 52a82e23b9f2 ("af_iucv: Validate socket address length in iucv_sock_bind()")
Signed-off-by: Mateusz Jurczyk <[email protected]>
[jwi: removed unneeded null-check for addr]
Signed-off-by: Julian Wiedmann <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/iucv/af_iucv.c | 8 +++-----
1 file changed, 3 insertions(+), 5 deletions(-)
diff --git a/net/iucv/af_iucv.c b/net/iucv/af_iucv.c
index aeffb65181f5..5984cc35d508 100644
--- a/net/iucv/af_iucv.c
+++ b/net/iucv/af_iucv.c
@@ -705,10 +705,8 @@ static int iucv_sock_bind(struct socket *sock, struct sockaddr *addr,
char uid[9];
/* Verify the input sockaddr */
- if (!addr || addr->sa_family != AF_IUCV)
- return -EINVAL;
-
- if (addr_len < sizeof(struct sockaddr_iucv))
+ if (addr_len < sizeof(struct sockaddr_iucv) ||
+ addr->sa_family != AF_IUCV)
return -EINVAL;
lock_sock(sk);
@@ -852,7 +850,7 @@ static int iucv_sock_connect(struct socket *sock, struct sockaddr *addr,
struct iucv_sock *iucv = iucv_sk(sk);
int err;
- if (addr->sa_family != AF_IUCV || alen < sizeof(struct sockaddr_iucv))
+ if (alen < sizeof(struct sockaddr_iucv) || addr->sa_family != AF_IUCV)
return -EINVAL;
if (sk->sk_state != IUCV_OPEN && sk->sk_state != IUCV_BOUND)
--
2.17.1
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 26716ce124fce88f288f07738ef685d5dfe5c13f ]
When the thermal subsystem is a loadable module, the u8500 driver
fails to build:
drivers/thermal/built-in.o: In function `db8500_thermal_probe':
db8500_thermal.c:(.text+0x96c): undefined reference to `thermal_zone_device_register'
drivers/thermal/built-in.o: In function `db8500_thermal_work':
db8500_thermal.c:(.text+0xab4): undefined reference to `thermal_zone_device_update'
This changes the symbol to a tristate, so Kconfig can track the
dependency correctly.
Signed-off-by: Arnd Bergmann <[email protected]>
Signed-off-by: Eduardo Valentin <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/mfd/db8500-prcmu.c | 3 +++
drivers/thermal/Kconfig | 4 ++--
2 files changed, 5 insertions(+), 2 deletions(-)
diff --git a/drivers/mfd/db8500-prcmu.c b/drivers/mfd/db8500-prcmu.c
index e6e4bacb09ee..12099b09a9a7 100644
--- a/drivers/mfd/db8500-prcmu.c
+++ b/drivers/mfd/db8500-prcmu.c
@@ -2048,6 +2048,7 @@ int db8500_prcmu_config_hotmon(u8 low, u8 high)
return 0;
}
+EXPORT_SYMBOL_GPL(db8500_prcmu_config_hotmon);
static int config_hot_period(u16 val)
{
@@ -2074,11 +2075,13 @@ int db8500_prcmu_start_temp_sense(u16 cycles32k)
return config_hot_period(cycles32k);
}
+EXPORT_SYMBOL_GPL(db8500_prcmu_start_temp_sense);
int db8500_prcmu_stop_temp_sense(void)
{
return config_hot_period(0xFFFF);
}
+EXPORT_SYMBOL_GPL(db8500_prcmu_stop_temp_sense);
static int prcmu_a9wdog(u8 cmd, u8 d0, u8 d1, u8 d2, u8 d3)
{
diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig
index b556fa8250fc..1def65d2f0b5 100644
--- a/drivers/thermal/Kconfig
+++ b/drivers/thermal/Kconfig
@@ -237,8 +237,8 @@ config DOVE_THERMAL
framework.
config DB8500_THERMAL
- bool "DB8500 thermal management"
- depends on ARCH_U8500
+ tristate "DB8500 thermal management"
+ depends on MFD_DB8500_PRCMU
default y
help
Adds DB8500 thermal management implementation according to the thermal
--
2.17.1
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 9c734b2769a73eea2e9e9767c0e0bf839ff23679 ]
The driver does not check for Wake-on-LAN modes specified by an user,
but will conditionally set the device as wake-up enabled or not based on
that, which could be a very confusing user experience.
Fixes: 6c636503260d ("smsc75xx: add wol magic packet support")
Signed-off-by: Florian Fainelli <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/usb/smsc75xx.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/net/usb/smsc75xx.c b/drivers/net/usb/smsc75xx.c
index 8dbe086e0a96..234febc6e1d9 100644
--- a/drivers/net/usb/smsc75xx.c
+++ b/drivers/net/usb/smsc75xx.c
@@ -728,6 +728,9 @@ static int smsc75xx_ethtool_set_wol(struct net_device *net,
struct smsc75xx_priv *pdata = (struct smsc75xx_priv *)(dev->data[0]);
int ret;
+ if (wolinfo->wolopts & ~SUPPORTED_WAKE)
+ return -EINVAL;
+
pdata->wolopts = wolinfo->wolopts & SUPPORTED_WAKE;
ret = device_set_wakeup_enable(&dev->udev->dev, pdata->wolopts);
--
2.17.1
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit da77b67195de1c65bef4908fa29967c4d0af2da2 ]
Commit b894157145e4 ("x86/PCI: Mark Broadwell-EP Home Agent & PCU as having
non-compliant BARs") marked Home Agent 0 & PCU has having non-compliant
BARs. Home Agent 1 also has non-compliant BARs.
Mark Home Agent 1 as having non-compliant BARs so the PCI core doesn't
touch them.
The problem with these devices is documented in the Xeon v4 specification
update:
BDF2 PCI BARs in the Home Agent Will Return Non-Zero Values
During Enumeration
Problem: During system initialization the Operating System may access
the standard PCI BARs (Base Address Registers). Due to
this erratum, accesses to the Home Agent BAR registers (Bus
1; Device 18; Function 0,4; Offsets (0x14-0x24) will return
non-zero values.
Implication: The operating system may issue a warning. Intel has not
observed any functional failures due to this erratum.
Link: http://www.intel.com/content/www/us/en/processors/xeon/xeon-e5-v4-spec-update.html
Fixes: b894157145e4 ("x86/PCI: Mark Broadwell-EP Home Agent & PCU as having non-compliant BARs")
Signed-off-by: Prarit Bhargava <[email protected]>
Signed-off-by: Bjorn Helgaas <[email protected]>
CC: Thomas Gleixner <[email protected]>
CC: Ingo Molnar <[email protected]>
CC: "H. Peter Anvin" <[email protected]>
CC: Andi Kleen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/x86/pci/fixup.c | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/arch/x86/pci/fixup.c b/arch/x86/pci/fixup.c
index 0ae7e9fa348d..89f90549c6a8 100644
--- a/arch/x86/pci/fixup.c
+++ b/arch/x86/pci/fixup.c
@@ -541,9 +541,16 @@ static void twinhead_reserve_killing_zone(struct pci_dev *dev)
}
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x27B9, twinhead_reserve_killing_zone);
+/*
+ * Broadwell EP Home Agent BARs erroneously return non-zero values when read.
+ *
+ * See http://www.intel.com/content/www/us/en/processors/xeon/xeon-e5-v4-spec-update.html
+ * entry BDF2.
+ */
static void pci_bdwep_bar(struct pci_dev *dev)
{
dev->non_compliant_bars = 1;
}
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x6f60, pci_bdwep_bar);
DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x6fa0, pci_bdwep_bar);
DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x6fc0, pci_bdwep_bar);
--
2.17.1
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit c4ce446e33d7a0e978256ac6fea4c80e59d9de5f ]
The driver currently silently accepts unsupported Wake-on-LAN modes
(other than WAKE_PHY or WAKE_MAGIC) without reporting that to the user,
which is confusing.
Fixes: 2e55cc7210fe ("[PATCH] USB: usbnet (3/9) module for ASIX Ethernet adapters")
Signed-off-by: Florian Fainelli <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/usb/asix_common.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/net/usb/asix_common.c b/drivers/net/usb/asix_common.c
index 7fbd8f044207..2092ef6431f2 100644
--- a/drivers/net/usb/asix_common.c
+++ b/drivers/net/usb/asix_common.c
@@ -449,6 +449,9 @@ int asix_set_wol(struct net_device *net, struct ethtool_wolinfo *wolinfo)
struct usbnet *dev = netdev_priv(net);
u8 opt = 0;
+ if (wolinfo->wolopts & ~(WAKE_PHY | WAKE_MAGIC))
+ return -EINVAL;
+
if (wolinfo->wolopts & WAKE_PHY)
opt |= AX_MONITOR_LINK;
if (wolinfo->wolopts & WAKE_MAGIC)
--
2.17.1
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 8682250b3c1b75a45feb7452bc413d004cfe3778 ]
If a frame is dropped for any reason, mac80211 wouldn't report the TX
status back to user space.
As the user space may rely on the TX_STATUS to kick its state
machines, resends etc, it's better to just report this frame as not
acked instead.
Signed-off-by: Andrei Otcheretianski <[email protected]>
Signed-off-by: Luca Coelho <[email protected]>
Signed-off-by: Johannes Berg <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/mac80211/status.c | 7 ++-----
1 file changed, 2 insertions(+), 5 deletions(-)
diff --git a/net/mac80211/status.c b/net/mac80211/status.c
index 45fb1abdb265..2731cf5bf052 100644
--- a/net/mac80211/status.c
+++ b/net/mac80211/status.c
@@ -466,11 +466,6 @@ static void ieee80211_report_ack_skb(struct ieee80211_local *local,
if (!skb)
return;
- if (dropped) {
- dev_kfree_skb_any(skb);
- return;
- }
-
if (info->flags & IEEE80211_TX_INTFL_NL80211_FRAME_TX) {
u64 cookie = IEEE80211_SKB_CB(skb)->ack.cookie;
struct ieee80211_sub_if_data *sdata;
@@ -491,6 +486,8 @@ static void ieee80211_report_ack_skb(struct ieee80211_local *local,
}
rcu_read_unlock();
+ dev_kfree_skb_any(skb);
+ } else if (dropped) {
dev_kfree_skb_any(skb);
} else {
/* consumes skb */
--
2.17.1
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 9f8a7658bcafb2a7853f7a2eae8a94e87e6e695b ]
When a user timer instance is continued without the explicit start
beforehand, the system gets eventually zero-division error like:
divide error: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN
CPU: 1 PID: 27320 Comm: syz-executor Not tainted 4.8.0-rc3-next-20160825+ #8
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
task: ffff88003c9b2280 task.stack: ffff880027280000
RIP: 0010:[<ffffffff858e1a6c>] [< inline >] ktime_divns include/linux/ktime.h:195
RIP: 0010:[<ffffffff858e1a6c>] [<ffffffff858e1a6c>] snd_hrtimer_callback+0x1bc/0x3c0 sound/core/hrtimer.c:62
Call Trace:
<IRQ>
[< inline >] __run_hrtimer kernel/time/hrtimer.c:1238
[<ffffffff81504335>] __hrtimer_run_queues+0x325/0xe70 kernel/time/hrtimer.c:1302
[<ffffffff81506ceb>] hrtimer_interrupt+0x18b/0x420 kernel/time/hrtimer.c:1336
[<ffffffff8126d8df>] local_apic_timer_interrupt+0x6f/0xe0 arch/x86/kernel/apic/apic.c:933
[<ffffffff86e13056>] smp_apic_timer_interrupt+0x76/0xa0 arch/x86/kernel/apic/apic.c:957
[<ffffffff86e1210c>] apic_timer_interrupt+0x8c/0xa0 arch/x86/entry/entry_64.S:487
<EOI>
.....
Although a similar issue was spotted and a fix patch was merged in
commit [6b760bb2c63a: ALSA: timer: fix division by zero after
SNDRV_TIMER_IOCTL_CONTINUE], it seems covering only a part of
iceberg.
In this patch, we fix the issue a bit more drastically. Basically the
continue of an uninitialized timer is supposed to be a fresh start, so
we do it for user timers. For the direct snd_timer_continue() call,
there is no way to pass the initial tick value, so we kick out for the
uninitialized case.
Reported-by: Dmitry Vyukov <[email protected]>
Cc: <[email protected]>
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/core/timer.c | 14 ++++++++++++++
1 file changed, 14 insertions(+)
diff --git a/sound/core/timer.c b/sound/core/timer.c
index ef850a99d64a..f989adb98a22 100644
--- a/sound/core/timer.c
+++ b/sound/core/timer.c
@@ -35,6 +35,9 @@
#include <sound/initval.h>
#include <linux/kmod.h>
+/* internal flags */
+#define SNDRV_TIMER_IFLG_PAUSED 0x00010000
+
#if IS_ENABLED(CONFIG_SND_HRTIMER)
#define DEFAULT_TIMER_LIMIT 4
#elif IS_ENABLED(CONFIG_SND_RTCTIMER)
@@ -547,6 +550,10 @@ static int snd_timer_stop1(struct snd_timer_instance *timeri, bool stop)
}
}
timeri->flags &= ~(SNDRV_TIMER_IFLG_RUNNING | SNDRV_TIMER_IFLG_START);
+ if (stop)
+ timeri->flags &= ~SNDRV_TIMER_IFLG_PAUSED;
+ else
+ timeri->flags |= SNDRV_TIMER_IFLG_PAUSED;
snd_timer_notify1(timeri, stop ? SNDRV_TIMER_EVENT_STOP :
SNDRV_TIMER_EVENT_PAUSE);
unlock:
@@ -608,6 +615,10 @@ int snd_timer_stop(struct snd_timer_instance *timeri)
*/
int snd_timer_continue(struct snd_timer_instance *timeri)
{
+ /* timer can continue only after pause */
+ if (!(timeri->flags & SNDRV_TIMER_IFLG_PAUSED))
+ return -EINVAL;
+
if (timeri->flags & SNDRV_TIMER_IFLG_SLAVE)
return snd_timer_start_slave(timeri, false);
else
@@ -1837,6 +1848,9 @@ static int snd_timer_user_continue(struct file *file)
tu = file->private_data;
if (!tu->timeri)
return -EBADFD;
+ /* start timer instead of continue if it's not used before */
+ if (!(tu->timeri->flags & SNDRV_TIMER_IFLG_PAUSED))
+ return snd_timer_user_start(file);
tu->timeri->lost = 0;
return (err = snd_timer_continue(tu->timeri)) < 0 ? err : 0;
}
--
2.17.1
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 1e953d846ac015fbfcf09c857e8f893924cb629c ]
Commit af1b1a9b36b8 ("sparc64 mm: Fix base TSB sizing when hugetlb
pages are used") addressed the difference between hugetlb and THP
pages when computing TSB sizes. The following additional issues
were also discovered while working with the code.
In order to save memory, THP makes use of a huge zero page. This huge
zero page does not count against a task's RSS, but it does consume TSB
entries. This is similar to hugetlb pages. Therefore, count huge
zero page entries in hugetlb_pte_count.
Accounting of THP pages is done in the routine set_pmd_at().
Unfortunately, this does not catch the case where a THP page is split.
To handle this case, decrement the count in pmdp_invalidate().
pmdp_invalidate is only called when splitting a THP. However, 'sanity
checks' are added in case it is ever called for other purposes.
A more general issue exists with HPAGE_SIZE accounting.
hugetlb_pte_count tracks the number of HPAGE_SIZE (8M) pages. This
value is used to size the TSB for HPAGE_SIZE pages. However,
each HPAGE_SIZE page consists of two REAL_HPAGE_SIZE (4M) pages.
The TSB contains an entry for each REAL_HPAGE_SIZE page. Therefore,
the number of REAL_HPAGE_SIZE pages should be used to size the huge
page TSB. A new compile time constant REAL_HPAGE_PER_HPAGE is used
to multiply hugetlb_pte_count before sizing the TSB.
Changes from V1
- Fixed build issue if hugetlb or THP not configured
Signed-off-by: Mike Kravetz <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/sparc/include/asm/page_64.h | 1 +
arch/sparc/mm/fault_64.c | 1 +
arch/sparc/mm/tlb.c | 35 ++++++++++++++++++++++++++++----
arch/sparc/mm/tsb.c | 18 ++++++++++------
4 files changed, 45 insertions(+), 10 deletions(-)
diff --git a/arch/sparc/include/asm/page_64.h b/arch/sparc/include/asm/page_64.h
index 8c2a8c937540..c1263fc390db 100644
--- a/arch/sparc/include/asm/page_64.h
+++ b/arch/sparc/include/asm/page_64.h
@@ -25,6 +25,7 @@
#define HPAGE_MASK (~(HPAGE_SIZE - 1UL))
#define HUGETLB_PAGE_ORDER (HPAGE_SHIFT - PAGE_SHIFT)
#define HAVE_ARCH_HUGETLB_UNMAPPED_AREA
+#define REAL_HPAGE_PER_HPAGE (_AC(1,UL) << (HPAGE_SHIFT - REAL_HPAGE_SHIFT))
#endif
#ifndef __ASSEMBLY__
diff --git a/arch/sparc/mm/fault_64.c b/arch/sparc/mm/fault_64.c
index e15f33715103..b01ec72522cb 100644
--- a/arch/sparc/mm/fault_64.c
+++ b/arch/sparc/mm/fault_64.c
@@ -487,6 +487,7 @@ good_area:
tsb_grow(mm, MM_TSB_BASE, mm_rss);
#if defined(CONFIG_HUGETLB_PAGE) || defined(CONFIG_TRANSPARENT_HUGEPAGE)
mm_rss = mm->context.hugetlb_pte_count + mm->context.thp_pte_count;
+ mm_rss *= REAL_HPAGE_PER_HPAGE;
if (unlikely(mm_rss >
mm->context.tsb_block[MM_TSB_HUGE].tsb_rss_limit)) {
if (mm->context.tsb_block[MM_TSB_HUGE].tsb)
diff --git a/arch/sparc/mm/tlb.c b/arch/sparc/mm/tlb.c
index 3659d37b4d81..c56a195c9071 100644
--- a/arch/sparc/mm/tlb.c
+++ b/arch/sparc/mm/tlb.c
@@ -174,10 +174,25 @@ void set_pmd_at(struct mm_struct *mm, unsigned long addr,
return;
if ((pmd_val(pmd) ^ pmd_val(orig)) & _PAGE_PMD_HUGE) {
- if (pmd_val(pmd) & _PAGE_PMD_HUGE)
- mm->context.thp_pte_count++;
- else
- mm->context.thp_pte_count--;
+ /*
+ * Note that this routine only sets pmds for THP pages.
+ * Hugetlb pages are handled elsewhere. We need to check
+ * for huge zero page. Huge zero pages are like hugetlb
+ * pages in that there is no RSS, but there is the need
+ * for TSB entries. So, huge zero page counts go into
+ * hugetlb_pte_count.
+ */
+ if (pmd_val(pmd) & _PAGE_PMD_HUGE) {
+ if (is_huge_zero_page(pmd_page(pmd)))
+ mm->context.hugetlb_pte_count++;
+ else
+ mm->context.thp_pte_count++;
+ } else {
+ if (is_huge_zero_page(pmd_page(orig)))
+ mm->context.hugetlb_pte_count--;
+ else
+ mm->context.thp_pte_count--;
+ }
/* Do not try to allocate the TSB hash table if we
* don't have one already. We have various locks held
@@ -204,6 +219,9 @@ void set_pmd_at(struct mm_struct *mm, unsigned long addr,
}
}
+/*
+ * This routine is only called when splitting a THP
+ */
void pmdp_invalidate(struct vm_area_struct *vma, unsigned long address,
pmd_t *pmdp)
{
@@ -213,6 +231,15 @@ void pmdp_invalidate(struct vm_area_struct *vma, unsigned long address,
set_pmd_at(vma->vm_mm, address, pmdp, entry);
flush_tlb_range(vma, address, address + HPAGE_PMD_SIZE);
+
+ /*
+ * set_pmd_at() will not be called in a way to decrement
+ * thp_pte_count when splitting a THP, so do it now.
+ * Sanity check pmd before doing the actual decrement.
+ */
+ if ((pmd_val(entry) & _PAGE_PMD_HUGE) &&
+ !is_huge_zero_page(pmd_page(entry)))
+ (vma->vm_mm)->context.thp_pte_count--;
}
void pgtable_trans_huge_deposit(struct mm_struct *mm, pmd_t *pmdp,
diff --git a/arch/sparc/mm/tsb.c b/arch/sparc/mm/tsb.c
index 266411291634..84cd593117a6 100644
--- a/arch/sparc/mm/tsb.c
+++ b/arch/sparc/mm/tsb.c
@@ -489,8 +489,10 @@ retry_tsb_alloc:
int init_new_context(struct task_struct *tsk, struct mm_struct *mm)
{
+ unsigned long mm_rss = get_mm_rss(mm);
#if defined(CONFIG_HUGETLB_PAGE) || defined(CONFIG_TRANSPARENT_HUGEPAGE)
- unsigned long total_huge_pte_count;
+ unsigned long saved_hugetlb_pte_count;
+ unsigned long saved_thp_pte_count;
#endif
unsigned int i;
@@ -503,10 +505,12 @@ int init_new_context(struct task_struct *tsk, struct mm_struct *mm)
* will re-increment the counters as the parent PTEs are
* copied into the child address space.
*/
- total_huge_pte_count = mm->context.hugetlb_pte_count +
- mm->context.thp_pte_count;
+ saved_hugetlb_pte_count = mm->context.hugetlb_pte_count;
+ saved_thp_pte_count = mm->context.thp_pte_count;
mm->context.hugetlb_pte_count = 0;
mm->context.thp_pte_count = 0;
+
+ mm_rss -= saved_thp_pte_count * (HPAGE_SIZE / PAGE_SIZE);
#endif
/* copy_mm() copies over the parent's mm_struct before calling
@@ -519,11 +523,13 @@ int init_new_context(struct task_struct *tsk, struct mm_struct *mm)
/* If this is fork, inherit the parent's TSB size. We would
* grow it to that size on the first page fault anyways.
*/
- tsb_grow(mm, MM_TSB_BASE, get_mm_rss(mm));
+ tsb_grow(mm, MM_TSB_BASE, mm_rss);
#if defined(CONFIG_HUGETLB_PAGE) || defined(CONFIG_TRANSPARENT_HUGEPAGE)
- if (unlikely(total_huge_pte_count))
- tsb_grow(mm, MM_TSB_HUGE, total_huge_pte_count);
+ if (unlikely(saved_hugetlb_pte_count + saved_thp_pte_count))
+ tsb_grow(mm, MM_TSB_HUGE,
+ (saved_hugetlb_pte_count + saved_thp_pte_count) *
+ REAL_HPAGE_PER_HPAGE);
#endif
if (unlikely(!mm->context.tsb_block[MM_TSB_BASE].tsb))
--
2.17.1
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 378da4a65f3a0390837b38145bb5d8c2d20c2cf7 ]
platform_get_irq() returns an error code, but the spi-bcm63xx-hsspi
driver ignores it and always returns -ENXIO. This is not correct and,
prevents -EPROBE_DEFER from being propagated properly.
Notice that platform_get_irq() no longer returns 0 on error:
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=e330b9a6bb35dc7097a4f02cb1ae7b6f96df92af
Print and propagate the return value of platform_get_irq on failure.
This issue was detected with the help of Coccinelle.
Signed-off-by: Gustavo A. R. Silva <[email protected]>
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/spi/spi-bcm63xx-hsspi.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/spi/spi-bcm63xx-hsspi.c b/drivers/spi/spi-bcm63xx-hsspi.c
index 55789f7cda92..645f428ad0a2 100644
--- a/drivers/spi/spi-bcm63xx-hsspi.c
+++ b/drivers/spi/spi-bcm63xx-hsspi.c
@@ -336,8 +336,8 @@ static int bcm63xx_hsspi_probe(struct platform_device *pdev)
irq = platform_get_irq(pdev, 0);
if (irq < 0) {
- dev_err(dev, "no irq\n");
- return -ENXIO;
+ dev_err(dev, "no irq: %d\n", irq);
+ return irq;
}
res_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
--
2.17.1
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit dcd2d1f78664fdc75eadaaf65257834e24383d01 ]
During system resume:
kernel BUG at drivers/base/regmap/regcache.c:347!
...
PC is at regcache_sync+0x1c/0x128
LR is at ak4613_resume+0x28/0x34
The ak4613 driver is using a regmap cache sync to restore the
configuration of the chip on resume but does not actually define a
register cache which means that the resume is never going to work and we
trigger asserts in regmap. Fix this by enabling caching.
Based on commit d3030d11961a8c10 ("ASoC: ak4642: Enable cache usage to
fix crashes on resume") by Mark Brown <[email protected]>.
Signed-off-by: Geert Uytterhoeven <[email protected]>
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/soc/codecs/ak4613.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/sound/soc/codecs/ak4613.c b/sound/soc/codecs/ak4613.c
index 07a266460ec3..b4b36cc92ffe 100644
--- a/sound/soc/codecs/ak4613.c
+++ b/sound/soc/codecs/ak4613.c
@@ -143,6 +143,7 @@ static const struct regmap_config ak4613_regmap_cfg = {
.max_register = 0x16,
.reg_defaults = ak4613_reg,
.num_reg_defaults = ARRAY_SIZE(ak4613_reg),
+ .cache_type = REGCACHE_RBTREE,
};
static const struct of_device_id ak4613_of_match[] = {
--
2.17.1
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 838fe1887765f4cc679febea60d87d2a06bd300e ]
cleaner_kthread() is not marked freezable, and therefore calling
try_to_freeze() in its context is a pointless no-op.
In addition to that, as has been clearly demonstrated by 80ad623edd2d
("Revert "btrfs: clear PF_NOFREEZE in cleaner_kthread()"), it's perfectly
valid / legal for cleaner_kthread() to stay scheduled out in an arbitrary
place during suspend (in that particular example that was waiting for
reading of extent pages), so there is no need to leave any traces of
freezer in this kthread.
Fixes: 80ad623edd2d ("Revert "btrfs: clear PF_NOFREEZE in cleaner_kthread()")
Fixes: 696249132158 ("btrfs: clear PF_NOFREEZE in cleaner_kthread()")
Signed-off-by: Jiri Kosina <[email protected]>
Signed-off-by: David Sterba <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/btrfs/disk-io.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/fs/btrfs/disk-io.c b/fs/btrfs/disk-io.c
index ae6e3a30e61e..a2001abbe379 100644
--- a/fs/btrfs/disk-io.c
+++ b/fs/btrfs/disk-io.c
@@ -1820,7 +1820,7 @@ static int cleaner_kthread(void *arg)
*/
btrfs_delete_unused_bgs(root->fs_info);
sleep:
- if (!try_to_freeze() && !again) {
+ if (!again) {
set_current_state(TASK_INTERRUPTIBLE);
if (!kthread_should_stop())
schedule();
--
2.17.1
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit ca1f3ae3154ad6d08caa740c99be0d86644a4e44 ]
platform_get_irq() returns an error code, but the gpio-msic driver
ignores it and always returns -EINVAL. This is not correct, and
prevents -EPROBE_DEFER from being propagated properly.
Notice that platform_get_irq() no longer returns 0 on error:
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=e330b9a6bb35dc7097a4f02cb1ae7b6f96df92af
Print and propagate the return value of platform_get_irq on failure.
Signed-off-by: Gustavo A. R. Silva <[email protected]>
Signed-off-by: Linus Walleij <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpio/gpio-msic.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/gpio/gpio-msic.c b/drivers/gpio/gpio-msic.c
index 22523aae8abe..3abf066f93d3 100644
--- a/drivers/gpio/gpio-msic.c
+++ b/drivers/gpio/gpio-msic.c
@@ -266,8 +266,8 @@ static int platform_msic_gpio_probe(struct platform_device *pdev)
int i;
if (irq < 0) {
- dev_err(dev, "no IRQ line\n");
- return -EINVAL;
+ dev_err(dev, "no IRQ line: %d\n", irq);
+ return irq;
}
if (!pdata || !pdata->gpio_base) {
--
2.17.1
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Niklas Cassel <[email protected]>
[ Upstream commit 30549aab146ccb1275230c3b4b4bc6b4181fd54e ]
When building stmmac, it is only possible to select CONFIG_DWMAC_GENERIC,
or any of the glue drivers, when CONFIG_STMMAC_PLATFORM is set.
The only exception is CONFIG_STMMAC_PCI.
When calling of_mdiobus_register(), it will call our ->reset()
callback, which is set to stmmac_mdio_reset().
Most of the code in stmmac_mdio_reset() is protected by a
"#if defined(CONFIG_STMMAC_PLATFORM)", which will evaluate
to false when CONFIG_STMMAC_PLATFORM=m.
Because of this, the phy reset gpio will only be pulled when
stmmac is built as built-in, but not when built as modules.
Fix this by using "#if IS_ENABLED()" instead of "#if defined()".
Signed-off-by: Niklas Cassel <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c
@@ -130,7 +130,7 @@ static int stmmac_mdio_write(struct mii_
*/
int stmmac_mdio_reset(struct mii_bus *bus)
{
-#if defined(CONFIG_STMMAC_PLATFORM)
+#if IS_ENABLED(CONFIG_STMMAC_PLATFORM)
struct net_device *ndev = bus->priv;
struct stmmac_priv *priv = netdev_priv(ndev);
unsigned int mii_address = priv->hw->mii.addr;
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 48cac18ecf1de82f76259a54402c3adb7839ad01 ]
Andrey reported a use-after-free in IPv6 stack.
Issue here is that we free the socket while it still has skb
in TX path and in some queues.
It happens here because IPv6 reassembly unit messes skb->truesize,
breaking skb_set_owner_w() badly.
We fixed a similar issue for IPV4 in commit 8282f27449bf ("inet: frag:
Always orphan skbs inside ip_defrag()")
Acked-by: Joe Stringer <[email protected]>
==================================================================
BUG: KASAN: use-after-free in sock_wfree+0x118/0x120
Read of size 8 at addr ffff880062da0060 by task a.out/4140
page:ffffea00018b6800 count:1 mapcount:0 mapping: (null)
index:0x0 compound_mapcount: 0
flags: 0x100000000008100(slab|head)
raw: 0100000000008100 0000000000000000 0000000000000000 0000000180130013
raw: dead000000000100 dead000000000200 ffff88006741f140 0000000000000000
page dumped because: kasan: bad access detected
CPU: 0 PID: 4140 Comm: a.out Not tainted 4.10.0-rc3+ #59
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:15
dump_stack+0x292/0x398 lib/dump_stack.c:51
describe_address mm/kasan/report.c:262
kasan_report_error+0x121/0x560 mm/kasan/report.c:370
kasan_report mm/kasan/report.c:392
__asan_report_load8_noabort+0x3e/0x40 mm/kasan/report.c:413
sock_flag ./arch/x86/include/asm/bitops.h:324
sock_wfree+0x118/0x120 net/core/sock.c:1631
skb_release_head_state+0xfc/0x250 net/core/skbuff.c:655
skb_release_all+0x15/0x60 net/core/skbuff.c:668
__kfree_skb+0x15/0x20 net/core/skbuff.c:684
kfree_skb+0x16e/0x4e0 net/core/skbuff.c:705
inet_frag_destroy+0x121/0x290 net/ipv4/inet_fragment.c:304
inet_frag_put ./include/net/inet_frag.h:133
nf_ct_frag6_gather+0x1125/0x38b0 net/ipv6/netfilter/nf_conntrack_reasm.c:617
ipv6_defrag+0x21b/0x350 net/ipv6/netfilter/nf_defrag_ipv6_hooks.c:68
nf_hook_entry_hookfn ./include/linux/netfilter.h:102
nf_hook_slow+0xc3/0x290 net/netfilter/core.c:310
nf_hook ./include/linux/netfilter.h:212
__ip6_local_out+0x52c/0xaf0 net/ipv6/output_core.c:160
ip6_local_out+0x2d/0x170 net/ipv6/output_core.c:170
ip6_send_skb+0xa1/0x340 net/ipv6/ip6_output.c:1722
ip6_push_pending_frames+0xb3/0xe0 net/ipv6/ip6_output.c:1742
rawv6_push_pending_frames net/ipv6/raw.c:613
rawv6_sendmsg+0x2cff/0x4130 net/ipv6/raw.c:927
inet_sendmsg+0x164/0x5b0 net/ipv4/af_inet.c:744
sock_sendmsg_nosec net/socket.c:635
sock_sendmsg+0xca/0x110 net/socket.c:645
sock_write_iter+0x326/0x620 net/socket.c:848
new_sync_write fs/read_write.c:499
__vfs_write+0x483/0x760 fs/read_write.c:512
vfs_write+0x187/0x530 fs/read_write.c:560
SYSC_write fs/read_write.c:607
SyS_write+0xfb/0x230 fs/read_write.c:599
entry_SYSCALL_64_fastpath+0x1f/0xc2 arch/x86/entry/entry_64.S:203
RIP: 0033:0x7ff26e6f5b79
RSP: 002b:00007ff268e0ed98 EFLAGS: 00000206 ORIG_RAX: 0000000000000001
RAX: ffffffffffffffda RBX: 00007ff268e0f9c0 RCX: 00007ff26e6f5b79
RDX: 0000000000000010 RSI: 0000000020f50fe1 RDI: 0000000000000003
RBP: 00007ff26ebc1220 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000206 R12: 0000000000000000
R13: 00007ff268e0f9c0 R14: 00007ff26efec040 R15: 0000000000000003
The buggy address belongs to the object at ffff880062da0000
which belongs to the cache RAWv6 of size 1504
The buggy address ffff880062da0060 is located 96 bytes inside
of 1504-byte region [ffff880062da0000, ffff880062da05e0)
Freed by task 4113:
save_stack_trace+0x16/0x20 arch/x86/kernel/stacktrace.c:57
save_stack+0x43/0xd0 mm/kasan/kasan.c:502
set_track mm/kasan/kasan.c:514
kasan_slab_free+0x73/0xc0 mm/kasan/kasan.c:578
slab_free_hook mm/slub.c:1352
slab_free_freelist_hook mm/slub.c:1374
slab_free mm/slub.c:2951
kmem_cache_free+0xb2/0x2c0 mm/slub.c:2973
sk_prot_free net/core/sock.c:1377
__sk_destruct+0x49c/0x6e0 net/core/sock.c:1452
sk_destruct+0x47/0x80 net/core/sock.c:1460
__sk_free+0x57/0x230 net/core/sock.c:1468
sk_free+0x23/0x30 net/core/sock.c:1479
sock_put ./include/net/sock.h:1638
sk_common_release+0x31e/0x4e0 net/core/sock.c:2782
rawv6_close+0x54/0x80 net/ipv6/raw.c:1214
inet_release+0xed/0x1c0 net/ipv4/af_inet.c:425
inet6_release+0x50/0x70 net/ipv6/af_inet6.c:431
sock_release+0x8d/0x1e0 net/socket.c:599
sock_close+0x16/0x20 net/socket.c:1063
__fput+0x332/0x7f0 fs/file_table.c:208
____fput+0x15/0x20 fs/file_table.c:244
task_work_run+0x19b/0x270 kernel/task_work.c:116
exit_task_work ./include/linux/task_work.h:21
do_exit+0x186b/0x2800 kernel/exit.c:839
do_group_exit+0x149/0x420 kernel/exit.c:943
SYSC_exit_group kernel/exit.c:954
SyS_exit_group+0x1d/0x20 kernel/exit.c:952
entry_SYSCALL_64_fastpath+0x1f/0xc2 arch/x86/entry/entry_64.S:203
Allocated by task 4115:
save_stack_trace+0x16/0x20 arch/x86/kernel/stacktrace.c:57
save_stack+0x43/0xd0 mm/kasan/kasan.c:502
set_track mm/kasan/kasan.c:514
kasan_kmalloc+0xad/0xe0 mm/kasan/kasan.c:605
kasan_slab_alloc+0x12/0x20 mm/kasan/kasan.c:544
slab_post_alloc_hook mm/slab.h:432
slab_alloc_node mm/slub.c:2708
slab_alloc mm/slub.c:2716
kmem_cache_alloc+0x1af/0x250 mm/slub.c:2721
sk_prot_alloc+0x65/0x2a0 net/core/sock.c:1334
sk_alloc+0x105/0x1010 net/core/sock.c:1396
inet6_create+0x44d/0x1150 net/ipv6/af_inet6.c:183
__sock_create+0x4f6/0x880 net/socket.c:1199
sock_create net/socket.c:1239
SYSC_socket net/socket.c:1269
SyS_socket+0xf9/0x230 net/socket.c:1249
entry_SYSCALL_64_fastpath+0x1f/0xc2 arch/x86/entry/entry_64.S:203
Memory state around the buggy address:
ffff880062d9ff00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
ffff880062d9ff80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
>ffff880062da0000: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
^
ffff880062da0080: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff880062da0100: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
==================================================================
Reported-by: Andrey Konovalov <[email protected]>
Signed-off-by: Eric Dumazet <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/ipv6/netfilter/nf_conntrack_reasm.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/net/ipv6/netfilter/nf_conntrack_reasm.c b/net/ipv6/netfilter/nf_conntrack_reasm.c
index 838b65a59a73..5a9ae56e7868 100644
--- a/net/ipv6/netfilter/nf_conntrack_reasm.c
+++ b/net/ipv6/netfilter/nf_conntrack_reasm.c
@@ -601,6 +601,7 @@ struct sk_buff *nf_ct_frag6_gather(struct net *net, struct sk_buff *skb, u32 use
hdr = ipv6_hdr(clone);
fhdr = (struct frag_hdr *)skb_transport_header(clone);
+ skb_orphan(skb);
fq = fq_find(net, fhdr->identification, user, &hdr->saddr, &hdr->daddr,
skb->dev ? skb->dev->ifindex : 0, ip6_frag_ecn(hdr));
if (fq == NULL) {
--
2.17.1
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 934767c56b0d9dbb95a40e9e6e4d9dcdc3a165ad ]
The return status of the adapter check on KERNEL_PANIC is supposed to be
the upper 16 bits of the OMR status register.
Fixes: c421530bf848604e (scsi: aacraid: Reorder Adpater status check)
Reported-by: Dan Carpenter <[email protected]>
Signed-off-by: Raghava Aditya Renukunta <[email protected]>
Reviewed-by: Dave Carroll <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/scsi/aacraid/src.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/scsi/aacraid/src.c b/drivers/scsi/aacraid/src.c
index e415e1c58eb5..cf3ac0654a3a 100644
--- a/drivers/scsi/aacraid/src.c
+++ b/drivers/scsi/aacraid/src.c
@@ -444,7 +444,7 @@ err_out:
return -1;
err_blink:
- return (status > 16) & 0xFF;
+ return (status >> 16) & 0xFF;
}
/**
--
2.17.1
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 19cdead3e2ef8ed765c5d1ce48057ca9d97b5094 ]
On slave list updates, the bonding driver computes its hard_header_len
as the maximum of all enslaved devices's hard_header_len.
If the slave list is empty, e.g. on last enslaved device removal,
ETH_HLEN is used.
Since the bonding header_ops are set only when the first enslaved
device is attached, the above can lead to header_ops->create()
being called with the wrong skb headroom in place.
If bond0 is configured on top of ipoib devices, with the
following commands:
ifup bond0
for slave in $BOND_SLAVES_LIST; do
ip link set dev $slave nomaster
done
ping -c 1 <ip on bond0 subnet>
we will obtain a skb_under_panic() with a similar call trace:
skb_push+0x3d/0x40
push_pseudo_header+0x17/0x30 [ib_ipoib]
ipoib_hard_header+0x4e/0x80 [ib_ipoib]
arp_create+0x12f/0x220
arp_send_dst.part.19+0x28/0x50
arp_solicit+0x115/0x290
neigh_probe+0x4d/0x70
__neigh_event_send+0xa7/0x230
neigh_resolve_output+0x12e/0x1c0
ip_finish_output2+0x14b/0x390
ip_finish_output+0x136/0x1e0
ip_output+0x76/0xe0
ip_local_out+0x35/0x40
ip_send_skb+0x19/0x40
ip_push_pending_frames+0x33/0x40
raw_sendmsg+0x7d3/0xb50
inet_sendmsg+0x31/0xb0
sock_sendmsg+0x38/0x50
SYSC_sendto+0x102/0x190
SyS_sendto+0xe/0x10
do_syscall_64+0x67/0x180
entry_SYSCALL64_slow_path+0x25/0x25
This change addresses the issue avoiding updating the bonding device
hard_header_len when the slaves list become empty, forbidding to
shrink it below the value used by header_ops->create().
The bug is there since commit 54ef31371407 ("[PATCH] bonding: Handle large
hard_header_len") but the panic can be triggered only since
commit fc791b633515 ("IB/ipoib: move back IB LL address into the hard
header").
Reported-by: Norbert P <[email protected]>
Fixes: 54ef31371407 ("[PATCH] bonding: Handle large hard_header_len")
Fixes: fc791b633515 ("IB/ipoib: move back IB LL address into the hard header")
Signed-off-by: Marcelo Ricardo Leitner <[email protected]>
Signed-off-by: Paolo Abeni <[email protected]>
Signed-off-by: Jay Vosburgh <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/bonding/bond_main.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/net/bonding/bond_main.c
+++ b/drivers/net/bonding/bond_main.c
@@ -1107,11 +1107,11 @@ static void bond_compute_features(struct
gso_max_size = min(gso_max_size, slave->dev->gso_max_size);
gso_max_segs = min(gso_max_segs, slave->dev->gso_max_segs);
}
+ bond_dev->hard_header_len = max_hard_header_len;
done:
bond_dev->vlan_features = vlan_features;
bond_dev->hw_enc_features = enc_features | NETIF_F_GSO_ENCAP_ALL;
- bond_dev->hard_header_len = max_hard_header_len;
bond_dev->gso_max_segs = gso_max_segs;
netif_set_gso_max_size(bond_dev, gso_max_size);
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Tobias Herzog <[email protected]>
commit f976d0e5747ca65ccd0fb2a4118b193d70aa1836 upstream.
The usb standard ("Universal Serial Bus Class Definitions for Communication
Devices") distiguishes between "consistent signals" (DSR, DCD), and
"irregular signals" (break, ring, parity error, framing error, overrun).
The bits of "irregular signals" are set, if this error/event occurred on
the device side and are immeadeatly unset, if the serial state notification
was sent.
Like other drivers of real serial ports do, just the occurence of those
events should be counted in serial_icounter_struct (but no 1->0
transitions).
Signed-off-by: Tobias Herzog <[email protected]>
Acked-by: Oliver Neukum <[email protected]>
Cc: stable <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/class/cdc-acm.c | 14 +++++++-------
1 file changed, 7 insertions(+), 7 deletions(-)
--- a/drivers/usb/class/cdc-acm.c
+++ b/drivers/usb/class/cdc-acm.c
@@ -332,17 +332,17 @@ static void acm_ctrl_irq(struct urb *urb
if (difference & ACM_CTRL_DSR)
acm->iocount.dsr++;
- if (difference & ACM_CTRL_BRK)
- acm->iocount.brk++;
- if (difference & ACM_CTRL_RI)
- acm->iocount.rng++;
if (difference & ACM_CTRL_DCD)
acm->iocount.dcd++;
- if (difference & ACM_CTRL_FRAMING)
+ if (newctrl & ACM_CTRL_BRK)
+ acm->iocount.brk++;
+ if (newctrl & ACM_CTRL_RI)
+ acm->iocount.rng++;
+ if (newctrl & ACM_CTRL_FRAMING)
acm->iocount.frame++;
- if (difference & ACM_CTRL_PARITY)
+ if (newctrl & ACM_CTRL_PARITY)
acm->iocount.parity++;
- if (difference & ACM_CTRL_OVERRUN)
+ if (newctrl & ACM_CTRL_OVERRUN)
acm->iocount.overrun++;
spin_unlock(&acm->read_lock);
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Gustavo A. R. Silva <[email protected]>
commit 9ae24af3669111d418242caec8dd4ebd9ba26860 upstream.
num can be indirectly controlled by user-space, hence leading to
a potential exploitation of the Spectre variant 1 vulnerability.
This issue was detected with the help of Smatch:
drivers/usb/gadget/function/f_mass_storage.c:3177 fsg_lun_make() warn:
potential spectre issue 'fsg_opts->common->luns' [r] (local cap)
Fix this by sanitizing num before using it to index
fsg_opts->common->luns
Notice that given that speculation windows are large, the policy is
to kill the speculation on the first load and not worry if it can be
completed with a dependent load/store [1].
[1] https://marc.info/?l=linux-kernel&m=152449131114778&w=2
Cc: [email protected]
Signed-off-by: Gustavo A. R. Silva <[email protected]>
Acked-by: Felipe Balbi <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/gadget/function/f_mass_storage.c | 3 +++
1 file changed, 3 insertions(+)
--- a/drivers/usb/gadget/function/f_mass_storage.c
+++ b/drivers/usb/gadget/function/f_mass_storage.c
@@ -220,6 +220,8 @@
#include <linux/usb/gadget.h>
#include <linux/usb/composite.h>
+#include <linux/nospec.h>
+
#include "configfs.h"
@@ -3260,6 +3262,7 @@ static struct config_group *fsg_lun_make
fsg_opts = to_fsg_opts(&group->cg_item);
if (num >= FSG_MAX_LUNS)
return ERR_PTR(-ERANGE);
+ num = array_index_nospec(num, FSG_MAX_LUNS);
mutex_lock(&fsg_opts->lock);
if (fsg_opts->refcnt || fsg_opts->common->luns[num]) {
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Mikhail Nikiforov <[email protected]>
commit 13c1c5e4d7f887cba36c5e3df3faa22071c1469f upstream.
Add ELAN061C to the ACPI table to support Elan touchpad found in Lenovo
IdeaPad 330-15IGM.
Signed-off-by: Mikhail Nikiforov <[email protected]>
Cc: [email protected]
Signed-off-by: Dmitry Torokhov <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/input/mouse/elan_i2c_core.c | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/input/mouse/elan_i2c_core.c
+++ b/drivers/input/mouse/elan_i2c_core.c
@@ -1251,6 +1251,7 @@ static const struct acpi_device_id elan_
{ "ELAN0611", 0 },
{ "ELAN0612", 0 },
{ "ELAN0618", 0 },
+ { "ELAN061C", 0 },
{ "ELAN061D", 0 },
{ "ELAN0622", 0 },
{ "ELAN1000", 0 },
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Phil Auld <[email protected]>
commit baa9be4ffb55876923dc9716abc0a448e510ba30 upstream.
With a very low cpu.cfs_quota_us setting, such as the minimum of 1000,
distribute_cfs_runtime may not empty the throttled_list before it runs
out of runtime to distribute. In that case, due to the change from
c06f04c7048 to put throttled entries at the head of the list, later entries
on the list will starve. Essentially, the same X processes will get pulled
off the list, given CPU time and then, when expired, get put back on the
head of the list where distribute_cfs_runtime will give runtime to the same
set of processes leaving the rest.
Fix the issue by setting a bit in struct cfs_bandwidth when
distribute_cfs_runtime is running, so that the code in throttle_cfs_rq can
decide to put the throttled entry on the tail or the head of the list. The
bit is set/cleared by the callers of distribute_cfs_runtime while they hold
cfs_bandwidth->lock.
This is easy to reproduce with a handful of CPU consumers. I use 'crash' on
the live system. In some cases you can simply look at the throttled list and
see the later entries are not changing:
crash> list cfs_rq.throttled_list -H 0xffff90b54f6ade40 -s cfs_rq.runtime_remaining | paste - - | awk '{print $1" "$4}' | pr -t -n3
1 ffff90b56cb2d200 -976050
2 ffff90b56cb2cc00 -484925
3 ffff90b56cb2bc00 -658814
4 ffff90b56cb2ba00 -275365
5 ffff90b166a45600 -135138
6 ffff90b56cb2da00 -282505
7 ffff90b56cb2e000 -148065
8 ffff90b56cb2fa00 -872591
9 ffff90b56cb2c000 -84687
10 ffff90b56cb2f000 -87237
11 ffff90b166a40a00 -164582
crash> list cfs_rq.throttled_list -H 0xffff90b54f6ade40 -s cfs_rq.runtime_remaining | paste - - | awk '{print $1" "$4}' | pr -t -n3
1 ffff90b56cb2d200 -994147
2 ffff90b56cb2cc00 -306051
3 ffff90b56cb2bc00 -961321
4 ffff90b56cb2ba00 -24490
5 ffff90b166a45600 -135138
6 ffff90b56cb2da00 -282505
7 ffff90b56cb2e000 -148065
8 ffff90b56cb2fa00 -872591
9 ffff90b56cb2c000 -84687
10 ffff90b56cb2f000 -87237
11 ffff90b166a40a00 -164582
Sometimes it is easier to see by finding a process getting starved and looking
at the sched_info:
crash> task ffff8eb765994500 sched_info
PID: 7800 TASK: ffff8eb765994500 CPU: 16 COMMAND: "cputest"
sched_info = {
pcount = 8,
run_delay = 697094208,
last_arrival = 240260125039,
last_queued = 240260327513
},
crash> task ffff8eb765994500 sched_info
PID: 7800 TASK: ffff8eb765994500 CPU: 16 COMMAND: "cputest"
sched_info = {
pcount = 8,
run_delay = 697094208,
last_arrival = 240260125039,
last_queued = 240260327513
},
Signed-off-by: Phil Auld <[email protected]>
Reviewed-by: Ben Segall <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: [email protected]
Fixes: c06f04c70489 ("sched: Fix potential near-infinite distribute_cfs_runtime() loop")
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Ingo Molnar <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
kernel/sched/fair.c | 22 +++++++++++++++++++---
kernel/sched/sched.h | 2 ++
2 files changed, 21 insertions(+), 3 deletions(-)
--- a/kernel/sched/fair.c
+++ b/kernel/sched/fair.c
@@ -3624,9 +3624,13 @@ static void throttle_cfs_rq(struct cfs_r
/*
* Add to the _head_ of the list, so that an already-started
- * distribute_cfs_runtime will not see us
+ * distribute_cfs_runtime will not see us. If disribute_cfs_runtime is
+ * not running add to the tail so that later runqueues don't get starved.
*/
- list_add_rcu(&cfs_rq->throttled_list, &cfs_b->throttled_cfs_rq);
+ if (cfs_b->distribute_running)
+ list_add_rcu(&cfs_rq->throttled_list, &cfs_b->throttled_cfs_rq);
+ else
+ list_add_tail_rcu(&cfs_rq->throttled_list, &cfs_b->throttled_cfs_rq);
/*
* If we're the first throttled task, make sure the bandwidth
@@ -3769,14 +3773,16 @@ static int do_sched_cfs_period_timer(str
* in us over-using our runtime if it is all used during this loop, but
* only by limited amounts in that extreme case.
*/
- while (throttled && cfs_b->runtime > 0) {
+ while (throttled && cfs_b->runtime > 0 && !cfs_b->distribute_running) {
runtime = cfs_b->runtime;
+ cfs_b->distribute_running = 1;
raw_spin_unlock(&cfs_b->lock);
/* we can't nest cfs_b->lock while distributing bandwidth */
runtime = distribute_cfs_runtime(cfs_b, runtime,
runtime_expires);
raw_spin_lock(&cfs_b->lock);
+ cfs_b->distribute_running = 0;
throttled = !list_empty(&cfs_b->throttled_cfs_rq);
cfs_b->runtime -= min(runtime, cfs_b->runtime);
@@ -3887,6 +3893,11 @@ static void do_sched_cfs_slack_timer(str
/* confirm we're still not at a refresh boundary */
raw_spin_lock(&cfs_b->lock);
+ if (cfs_b->distribute_running) {
+ raw_spin_unlock(&cfs_b->lock);
+ return;
+ }
+
if (runtime_refresh_within(cfs_b, min_bandwidth_expiration)) {
raw_spin_unlock(&cfs_b->lock);
return;
@@ -3896,6 +3907,9 @@ static void do_sched_cfs_slack_timer(str
runtime = cfs_b->runtime;
expires = cfs_b->runtime_expires;
+ if (runtime)
+ cfs_b->distribute_running = 1;
+
raw_spin_unlock(&cfs_b->lock);
if (!runtime)
@@ -3906,6 +3920,7 @@ static void do_sched_cfs_slack_timer(str
raw_spin_lock(&cfs_b->lock);
if (expires == cfs_b->runtime_expires)
cfs_b->runtime -= min(runtime, cfs_b->runtime);
+ cfs_b->distribute_running = 0;
raw_spin_unlock(&cfs_b->lock);
}
@@ -4017,6 +4032,7 @@ void init_cfs_bandwidth(struct cfs_bandw
cfs_b->period_timer.function = sched_cfs_period_timer;
hrtimer_init(&cfs_b->slack_timer, CLOCK_MONOTONIC, HRTIMER_MODE_REL);
cfs_b->slack_timer.function = sched_cfs_slack_timer;
+ cfs_b->distribute_running = 0;
}
static void init_cfs_rq_runtime(struct cfs_rq *cfs_rq)
--- a/kernel/sched/sched.h
+++ b/kernel/sched/sched.h
@@ -233,6 +233,8 @@ struct cfs_bandwidth {
/* statistics */
int nr_periods, nr_throttled;
u64 throttled_time;
+
+ bool distribute_running;
#endif
};
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Nathan Chancellor <[email protected]>
commit 53c13ba8ed39e89f21a0b98f4c8a241bb44e483d upstream.
Clang warns that the declaration of jiffies in include/linux/jiffies.h
doesn't match the definition in arch/x86/time/kernel.c:
arch/x86/kernel/time.c:29:42: warning: section does not match previous declaration [-Wsection]
__visible volatile unsigned long jiffies __cacheline_aligned = INITIAL_JIFFIES;
^
./include/linux/cache.h:49:4: note: expanded from macro '__cacheline_aligned'
__section__(".data..cacheline_aligned")))
^
./include/linux/jiffies.h:81:31: note: previous attribute is here
extern unsigned long volatile __cacheline_aligned_in_smp __jiffy_arch_data jiffies;
^
./arch/x86/include/asm/cache.h:20:2: note: expanded from macro '__cacheline_aligned_in_smp'
__page_aligned_data
^
./include/linux/linkage.h:39:29: note: expanded from macro '__page_aligned_data'
#define __page_aligned_data __section(.data..page_aligned) __aligned(PAGE_SIZE)
^
./include/linux/compiler_attributes.h:233:56: note: expanded from macro '__section'
#define __section(S) __attribute__((__section__(#S)))
^
1 warning generated.
The declaration was changed in commit 7c30f352c852 ("jiffies.h: declare
jiffies and jiffies_64 with ____cacheline_aligned_in_smp") but wasn't
updated here. Make them match so Clang no longer warns.
Fixes: 7c30f352c852 ("jiffies.h: declare jiffies and jiffies_64 with ____cacheline_aligned_in_smp")
Signed-off-by: Nathan Chancellor <[email protected]>
Signed-off-by: Thomas Gleixner <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: "H. Peter Anvin" <[email protected]>
Cc: Nick Desaulniers <[email protected]>
Cc: [email protected]
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/kernel/time.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/arch/x86/kernel/time.c
+++ b/arch/x86/kernel/time.c
@@ -23,7 +23,7 @@
#include <asm/time.h>
#ifdef CONFIG_X86_64
-__visible volatile unsigned long jiffies __cacheline_aligned = INITIAL_JIFFIES;
+__visible volatile unsigned long jiffies __cacheline_aligned_in_smp = INITIAL_JIFFIES;
#endif
unsigned long profile_pc(struct pt_regs *regs)
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Eric Dumazet <[email protected]>
[ Upstream commit dc012f3628eaecfb5ba68404a5c30ef501daf63d ]
syzbot found a use-after-free in inet6_mc_check [1]
The problem here is that inet6_mc_check() uses rcu
and read_lock(&iml->sflock)
So the fact that ip6_mc_leave_src() is called under RTNL
and the socket lock does not help us, we need to acquire
iml->sflock in write mode.
In the future, we should convert all this stuff to RCU.
[1]
BUG: KASAN: use-after-free in ipv6_addr_equal include/net/ipv6.h:521 [inline]
BUG: KASAN: use-after-free in inet6_mc_check+0xae7/0xb40 net/ipv6/mcast.c:649
Read of size 8 at addr ffff8801ce7f2510 by task syz-executor0/22432
CPU: 1 PID: 22432 Comm: syz-executor0 Not tainted 4.19.0-rc7+ #280
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x1c4/0x2b4 lib/dump_stack.c:113
print_address_description.cold.8+0x9/0x1ff mm/kasan/report.c:256
kasan_report_error mm/kasan/report.c:354 [inline]
kasan_report.cold.9+0x242/0x309 mm/kasan/report.c:412
__asan_report_load8_noabort+0x14/0x20 mm/kasan/report.c:433
ipv6_addr_equal include/net/ipv6.h:521 [inline]
inet6_mc_check+0xae7/0xb40 net/ipv6/mcast.c:649
__raw_v6_lookup+0x320/0x3f0 net/ipv6/raw.c:98
ipv6_raw_deliver net/ipv6/raw.c:183 [inline]
raw6_local_deliver+0x3d3/0xcb0 net/ipv6/raw.c:240
ip6_input_finish+0x467/0x1aa0 net/ipv6/ip6_input.c:345
NF_HOOK include/linux/netfilter.h:289 [inline]
ip6_input+0xe9/0x600 net/ipv6/ip6_input.c:426
ip6_mc_input+0x48a/0xd20 net/ipv6/ip6_input.c:503
dst_input include/net/dst.h:450 [inline]
ip6_rcv_finish+0x17a/0x330 net/ipv6/ip6_input.c:76
NF_HOOK include/linux/netfilter.h:289 [inline]
ipv6_rcv+0x120/0x640 net/ipv6/ip6_input.c:271
__netif_receive_skb_one_core+0x14d/0x200 net/core/dev.c:4913
__netif_receive_skb+0x2c/0x1e0 net/core/dev.c:5023
netif_receive_skb_internal+0x12c/0x620 net/core/dev.c:5126
napi_frags_finish net/core/dev.c:5664 [inline]
napi_gro_frags+0x75a/0xc90 net/core/dev.c:5737
tun_get_user+0x3189/0x4250 drivers/net/tun.c:1923
tun_chr_write_iter+0xb9/0x154 drivers/net/tun.c:1968
call_write_iter include/linux/fs.h:1808 [inline]
do_iter_readv_writev+0x8b0/0xa80 fs/read_write.c:680
do_iter_write+0x185/0x5f0 fs/read_write.c:959
vfs_writev+0x1f1/0x360 fs/read_write.c:1004
do_writev+0x11a/0x310 fs/read_write.c:1039
__do_sys_writev fs/read_write.c:1112 [inline]
__se_sys_writev fs/read_write.c:1109 [inline]
__x64_sys_writev+0x75/0xb0 fs/read_write.c:1109
do_syscall_64+0x1b9/0x820 arch/x86/entry/common.c:290
entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x457421
Code: 75 14 b8 14 00 00 00 0f 05 48 3d 01 f0 ff ff 0f 83 34 b5 fb ff c3 48 83 ec 08 e8 1a 2d 00 00 48 89 04 24 b8 14 00 00 00 0f 05 <48> 8b 3c 24 48 89 c2 e8 63 2d 00 00 48 89 d0 48 83 c4 08 48 3d 01
RSP: 002b:00007f2d30ecaba0 EFLAGS: 00000293 ORIG_RAX: 0000000000000014
RAX: ffffffffffffffda RBX: 000000000000003e RCX: 0000000000457421
RDX: 0000000000000001 RSI: 00007f2d30ecabf0 RDI: 00000000000000f0
RBP: 0000000020000500 R08: 00000000000000f0 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000293 R12: 00007f2d30ecb6d4
R13: 00000000004c4890 R14: 00000000004d7b90 R15: 00000000ffffffff
Allocated by task 22437:
save_stack+0x43/0xd0 mm/kasan/kasan.c:448
set_track mm/kasan/kasan.c:460 [inline]
kasan_kmalloc+0xc7/0xe0 mm/kasan/kasan.c:553
__do_kmalloc mm/slab.c:3718 [inline]
__kmalloc+0x14e/0x760 mm/slab.c:3727
kmalloc include/linux/slab.h:518 [inline]
sock_kmalloc+0x15a/0x1f0 net/core/sock.c:1983
ip6_mc_source+0x14dd/0x1960 net/ipv6/mcast.c:427
do_ipv6_setsockopt.isra.9+0x3afb/0x45d0 net/ipv6/ipv6_sockglue.c:743
ipv6_setsockopt+0xbd/0x170 net/ipv6/ipv6_sockglue.c:933
rawv6_setsockopt+0x59/0x140 net/ipv6/raw.c:1069
sock_common_setsockopt+0x9a/0xe0 net/core/sock.c:3038
__sys_setsockopt+0x1ba/0x3c0 net/socket.c:1902
__do_sys_setsockopt net/socket.c:1913 [inline]
__se_sys_setsockopt net/socket.c:1910 [inline]
__x64_sys_setsockopt+0xbe/0x150 net/socket.c:1910
do_syscall_64+0x1b9/0x820 arch/x86/entry/common.c:290
entry_SYSCALL_64_after_hwframe+0x49/0xbe
Freed by task 22430:
save_stack+0x43/0xd0 mm/kasan/kasan.c:448
set_track mm/kasan/kasan.c:460 [inline]
__kasan_slab_free+0x102/0x150 mm/kasan/kasan.c:521
kasan_slab_free+0xe/0x10 mm/kasan/kasan.c:528
__cache_free mm/slab.c:3498 [inline]
kfree+0xcf/0x230 mm/slab.c:3813
__sock_kfree_s net/core/sock.c:2004 [inline]
sock_kfree_s+0x29/0x60 net/core/sock.c:2010
ip6_mc_leave_src+0x11a/0x1d0 net/ipv6/mcast.c:2448
__ipv6_sock_mc_close+0x20b/0x4e0 net/ipv6/mcast.c:310
ipv6_sock_mc_close+0x158/0x1d0 net/ipv6/mcast.c:328
inet6_release+0x40/0x70 net/ipv6/af_inet6.c:452
__sock_release+0xd7/0x250 net/socket.c:579
sock_close+0x19/0x20 net/socket.c:1141
__fput+0x385/0xa30 fs/file_table.c:278
____fput+0x15/0x20 fs/file_table.c:309
task_work_run+0x1e8/0x2a0 kernel/task_work.c:113
tracehook_notify_resume include/linux/tracehook.h:193 [inline]
exit_to_usermode_loop+0x318/0x380 arch/x86/entry/common.c:166
prepare_exit_to_usermode arch/x86/entry/common.c:197 [inline]
syscall_return_slowpath arch/x86/entry/common.c:268 [inline]
do_syscall_64+0x6be/0x820 arch/x86/entry/common.c:293
entry_SYSCALL_64_after_hwframe+0x49/0xbe
The buggy address belongs to the object at ffff8801ce7f2500
which belongs to the cache kmalloc-192 of size 192
The buggy address is located 16 bytes inside of
192-byte region [ffff8801ce7f2500, ffff8801ce7f25c0)
The buggy address belongs to the page:
page:ffffea000739fc80 count:1 mapcount:0 mapping:ffff8801da800040 index:0x0
flags: 0x2fffc0000000100(slab)
raw: 02fffc0000000100 ffffea0006f6e548 ffffea000737b948 ffff8801da800040
raw: 0000000000000000 ffff8801ce7f2000 0000000100000010 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff8801ce7f2400: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff8801ce7f2480: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
>ffff8801ce7f2500: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
^
ffff8801ce7f2580: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
ffff8801ce7f2600: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Signed-off-by: Eric Dumazet <[email protected]>
Reported-by: syzbot <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/ipv6/mcast.c | 16 ++++++++--------
1 file changed, 8 insertions(+), 8 deletions(-)
--- a/net/ipv6/mcast.c
+++ b/net/ipv6/mcast.c
@@ -2390,17 +2390,17 @@ static int ip6_mc_leave_src(struct sock
{
int err;
- /* callers have the socket lock and rtnl lock
- * so no other readers or writers of iml or its sflist
- */
+ write_lock_bh(&iml->sflock);
if (!iml->sflist) {
/* any-source empty exclude case */
- return ip6_mc_del_src(idev, &iml->addr, iml->sfmode, 0, NULL, 0);
+ err = ip6_mc_del_src(idev, &iml->addr, iml->sfmode, 0, NULL, 0);
+ } else {
+ err = ip6_mc_del_src(idev, &iml->addr, iml->sfmode,
+ iml->sflist->sl_count, iml->sflist->sl_addr, 0);
+ sock_kfree_s(sk, iml->sflist, IP6_SFLSIZE(iml->sflist->sl_max));
+ iml->sflist = NULL;
}
- err = ip6_mc_del_src(idev, &iml->addr, iml->sfmode,
- iml->sflist->sl_count, iml->sflist->sl_addr, 0);
- sock_kfree_s(sk, iml->sflist, IP6_SFLSIZE(iml->sflist->sl_max));
- iml->sflist = NULL;
+ write_unlock_bh(&iml->sflock);
return err;
}
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Heiner Kallweit <[email protected]>
[ Upstream commit 6b839b6cf9eada30b086effb51e5d6076bafc761 ]
rtl_rx() and rtl_tx() are called only if the respective bits are set
in the interrupt status register. Under high load NAPI may not be
able to process all data (work_done == budget) and it will schedule
subsequent calls to the poll callback.
rtl_ack_events() however resets the bits in the interrupt status
register, therefore subsequent calls to rtl8169_poll() won't call
rtl_rx() and rtl_tx() - chip interrupts are still disabled.
Fix this by calling rtl_rx() and rtl_tx() independent of the bits
set in the interrupt status register. Both functions will detect
if there's nothing to do for them.
Fixes: da78dbff2e05 ("r8169: remove work from irq handler.")
Signed-off-by: Heiner Kallweit <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/realtek/r8169.c | 8 +++-----
1 file changed, 3 insertions(+), 5 deletions(-)
--- a/drivers/net/ethernet/realtek/r8169.c
+++ b/drivers/net/ethernet/realtek/r8169.c
@@ -7540,17 +7540,15 @@ static int rtl8169_poll(struct napi_stru
struct rtl8169_private *tp = container_of(napi, struct rtl8169_private, napi);
struct net_device *dev = tp->dev;
u16 enable_mask = RTL_EVENT_NAPI | tp->event_slow;
- int work_done= 0;
+ int work_done;
u16 status;
status = rtl_get_events(tp);
rtl_ack_events(tp, status & ~tp->event_slow);
- if (status & RTL_EVENT_NAPI_RX)
- work_done = rtl_rx(dev, tp, (u32) budget);
+ work_done = rtl_rx(dev, tp, (u32) budget);
- if (status & RTL_EVENT_NAPI_TX)
- rtl_tx(dev, tp);
+ rtl_tx(dev, tp);
if (status & tp->event_slow) {
enable_mask &= ~tp->event_slow;
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 9e578b37505018622dfafc40eed7cd78ff2af221 ]
platform_get_irq() returns an error code, but the tegra-devfreq
driver ignores it and always returns -ENODEV. This is not correct,
and prevents -EPROBE_DEFER from being propagated properly.
Notice that platform_get_irq() no longer returns 0 on error:
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=e330b9a6bb35dc7097a4f02cb1ae7b6f96df92af
Print and propagate the return value of platform_get_irq on failure.
Reviewed-by: Chanwoo Choi <[email protected]>
Signed-off-by: Gustavo A. R. Silva <[email protected]>
Signed-off-by: MyungJoo Ham <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/devfreq/tegra-devfreq.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/devfreq/tegra-devfreq.c b/drivers/devfreq/tegra-devfreq.c
index 848b93ee930f..64a2e02b87d7 100644
--- a/drivers/devfreq/tegra-devfreq.c
+++ b/drivers/devfreq/tegra-devfreq.c
@@ -688,9 +688,9 @@ static int tegra_devfreq_probe(struct platform_device *pdev)
}
irq = platform_get_irq(pdev, 0);
- if (irq <= 0) {
- dev_err(&pdev->dev, "Failed to get IRQ\n");
- return -ENODEV;
+ if (irq < 0) {
+ dev_err(&pdev->dev, "Failed to get IRQ: %d\n", irq);
+ return irq;
}
platform_set_drvdata(pdev, tegra);
--
2.17.1
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Gustavo A. R. Silva <[email protected]>
commit a3671a4f973ee9d9621d60166cc3b037c397d604 upstream.
hdr.cmd can be indirectly controlled by user-space, hence leading to
a potential exploitation of the Spectre variant 1 vulnerability.
This issue was detected with the help of Smatch:
drivers/infiniband/core/ucma.c:1686 ucma_write() warn: potential
spectre issue 'ucma_cmd_table' [r] (local cap)
Fix this by sanitizing hdr.cmd before using it to index
ucm_cmd_table.
Notice that given that speculation windows are large, the policy is
to kill the speculation on the first load and not worry if it can be
completed with a dependent load/store [1].
[1] https://marc.info/?l=linux-kernel&m=152449131114778&w=2
Cc: [email protected]
Signed-off-by: Gustavo A. R. Silva <[email protected]>
Signed-off-by: Doug Ledford <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/infiniband/core/ucma.c | 3 +++
1 file changed, 3 insertions(+)
--- a/drivers/infiniband/core/ucma.c
+++ b/drivers/infiniband/core/ucma.c
@@ -44,6 +44,8 @@
#include <linux/module.h>
#include <linux/nsproxy.h>
+#include <linux/nospec.h>
+
#include <rdma/rdma_user_cm.h>
#include <rdma/ib_marshall.h>
#include <rdma/rdma_cm.h>
@@ -1627,6 +1629,7 @@ static ssize_t ucma_write(struct file *f
if (hdr.cmd >= ARRAY_SIZE(ucma_cmd_table))
return -EINVAL;
+ hdr.cmd = array_index_nospec(hdr.cmd, ARRAY_SIZE(ucma_cmd_table));
if (hdr.in + sizeof(hdr) > len)
return -EINVAL;
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Alan Stern <[email protected]>
commit 665c365a77fbfeabe52694aedf3446d5f2f1ce42 upstream.
Commit 7a68d9fb8510 ("USB: usbdevfs: sanitize flags more") checks the
transfer flags for URBs submitted from userspace via usbfs. However,
the check for whether the USBDEVFS_URB_SHORT_NOT_OK flag should be
allowed for a control transfer was added in the wrong place, before
the code has properly determined the direction of the control
transfer. (Control transfers are special because for them, the
direction is set by the bRequestType byte of the Setup packet rather
than direction bit of the endpoint address.)
This patch moves code which sets up the allow_short flag for control
transfers down after is_in has been set to the correct value.
Signed-off-by: Alan Stern <[email protected]>
Reported-and-tested-by: [email protected]
Fixes: 7a68d9fb8510 ("USB: usbdevfs: sanitize flags more")
CC: Oliver Neukum <[email protected]>
CC: <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/core/devio.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/drivers/usb/core/devio.c
+++ b/drivers/usb/core/devio.c
@@ -1329,8 +1329,6 @@ static int proc_do_submiturb(struct usb_
u = 0;
switch (uurb->type) {
case USBDEVFS_URB_TYPE_CONTROL:
- if (is_in)
- allow_short = true;
if (!usb_endpoint_xfer_control(&ep->desc))
return -EINVAL;
/* min 8 byte setup packet */
@@ -1360,6 +1358,8 @@ static int proc_do_submiturb(struct usb_
is_in = 0;
uurb->endpoint &= ~USB_DIR_IN;
}
+ if (is_in)
+ allow_short = true;
snoop(&ps->dev->dev, "control urb: bRequestType=%02x "
"bRequest=%02x wValue=%04x "
"wIndex=%04x wLength=%04x\n",
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Gustavo A. R. Silva <[email protected]>
commit 0295e39595e1146522f2722715dba7f7fba42217 upstream.
hdr.cmd can be indirectly controlled by user-space, hence leading to
a potential exploitation of the Spectre variant 1 vulnerability.
This issue was detected with the help of Smatch:
drivers/infiniband/core/ucm.c:1127 ib_ucm_write() warn: potential
spectre issue 'ucm_cmd_table' [r] (local cap)
Fix this by sanitizing hdr.cmd before using it to index
ucm_cmd_table.
Notice that given that speculation windows are large, the policy is
to kill the speculation on the first load and not worry if it can be
completed with a dependent load/store [1].
[1] https://marc.info/?l=linux-kernel&m=152449131114778&w=2
Cc: [email protected]
Signed-off-by: Gustavo A. R. Silva <[email protected]>
Signed-off-by: Doug Ledford <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/infiniband/core/ucm.c | 3 +++
1 file changed, 3 insertions(+)
--- a/drivers/infiniband/core/ucm.c
+++ b/drivers/infiniband/core/ucm.c
@@ -46,6 +46,8 @@
#include <linux/mutex.h>
#include <linux/slab.h>
+#include <linux/nospec.h>
+
#include <asm/uaccess.h>
#include <rdma/ib.h>
@@ -1115,6 +1117,7 @@ static ssize_t ib_ucm_write(struct file
if (hdr.cmd >= ARRAY_SIZE(ucm_cmd_table))
return -EINVAL;
+ hdr.cmd = array_index_nospec(hdr.cmd, ARRAY_SIZE(ucm_cmd_table));
if (hdr.in + sizeof(hdr) > len)
return -EINVAL;
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 99dbff202e28ad1dadf55b058bcae7908678e963 ]
platform_get_irq() returns an error code, but the ehci-omap driver
ignores it and always returns -ENODEV. This is not correct and,
prevents -EPROBE_DEFER from being propagated properly.
Also, notice that platform_get_irq() no longer returns 0 on error:
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=e330b9a6bb35dc7097a4f02cb1ae7b6f96df92af
Print and propagate the return value of platform_get_irq on failure.
This issue was detected with the help of Coccinelle.
Signed-off-by: Gustavo A. R. Silva <[email protected]>
Acked-by: Alan Stern <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/usb/host/ehci-omap.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/usb/host/ehci-omap.c b/drivers/usb/host/ehci-omap.c
index a24720beb39d..cccde8217f28 100644
--- a/drivers/usb/host/ehci-omap.c
+++ b/drivers/usb/host/ehci-omap.c
@@ -130,8 +130,8 @@ static int ehci_hcd_omap_probe(struct platform_device *pdev)
irq = platform_get_irq(pdev, 0);
if (irq < 0) {
- dev_err(dev, "EHCI irq failed\n");
- return -ENODEV;
+ dev_err(dev, "EHCI irq failed: %d\n", irq);
+ return irq;
}
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
--
2.17.1
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 27d30400c448264c1ac9434cb836de0c230af213 ]
platform_get_irq() returns an error code, but the spdif_in driver
ignores it and always returns -EINVAL. This is not correct, and
prevents -EPROBE_DEFER from being propagated properly.
Notice that platform_get_irq() no longer returns 0 on error:
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=e330b9a6bb35dc7097a4f02cb1ae7b6f96df92af
Print error message and propagate the return value of platform_get_irq
on failure.
Signed-off-by: Gustavo A. R. Silva <[email protected]>
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/soc/spear/spdif_in.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/sound/soc/spear/spdif_in.c b/sound/soc/spear/spdif_in.c
index 977a078eb92f..7f32527fc3c8 100644
--- a/sound/soc/spear/spdif_in.c
+++ b/sound/soc/spear/spdif_in.c
@@ -223,8 +223,10 @@ static int spdif_in_probe(struct platform_device *pdev)
host->io_base = io_base;
host->irq = platform_get_irq(pdev, 0);
- if (host->irq < 0)
- return -EINVAL;
+ if (host->irq < 0) {
+ dev_warn(&pdev->dev, "failed to get IRQ: %d\n", host->irq);
+ return host->irq;
+ }
host->clk = devm_clk_get(&pdev->dev, NULL);
if (IS_ERR(host->clk))
--
2.17.1
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 9a6b94796ae6feaf275ec6200e9b2964db208182 ]
platform_get_irq() returns an error code, but the spi-xlp driver ignores
it and always returns -EINVAL. This is not correct and, prevents
-EPROBE_DEFER from being propagated properly.
Notice that platform_get_irq() no longer returns 0 on error:
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=e330b9a6bb35dc7097a4f02cb1ae7b6f96df92af
Print and propagate the return value of platform_get_irq on failure.
This issue was detected with the help of Coccinelle.
Signed-off-by: Gustavo A. R. Silva <[email protected]>
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/spi/spi-xlp.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/spi/spi-xlp.c b/drivers/spi/spi-xlp.c
index 8f04feca6ee3..0ddb0adaa8aa 100644
--- a/drivers/spi/spi-xlp.c
+++ b/drivers/spi/spi-xlp.c
@@ -392,8 +392,8 @@ static int xlp_spi_probe(struct platform_device *pdev)
irq = platform_get_irq(pdev, 0);
if (irq < 0) {
- dev_err(&pdev->dev, "no IRQ resource found\n");
- return -EINVAL;
+ dev_err(&pdev->dev, "no IRQ resource found: %d\n", irq);
+ return irq;
}
err = devm_request_irq(&pdev->dev, irq, xlp_spi_interrupt, 0,
pdev->name, xspi);
--
2.17.1
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit ba8afe94723e9ba665aee9cca649fb2c80f7304c ]
platform_get_irq() returns an error code, but the spi-bcm63xx driver
ignores it and always returns -ENXIO. This is not correct and,
prevents -EPROBE_DEFER from being propagated properly.
Notice that platform_get_irq() no longer returns 0 on error:
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=e330b9a6bb35dc7097a4f02cb1ae7b6f96df92af
Print and propagate the return value of platform_get_irq on failure.
This issue was detected with the help of Coccinelle.
Signed-off-by: Gustavo A. R. Silva <[email protected]>
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/spi/spi-bcm63xx.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/spi/spi-bcm63xx.c b/drivers/spi/spi-bcm63xx.c
index bf9a610e5b89..f14500910bc2 100644
--- a/drivers/spi/spi-bcm63xx.c
+++ b/drivers/spi/spi-bcm63xx.c
@@ -496,8 +496,8 @@ static int bcm63xx_spi_probe(struct platform_device *pdev)
irq = platform_get_irq(pdev, 0);
if (irq < 0) {
- dev_err(dev, "no irq\n");
- return -ENXIO;
+ dev_err(dev, "no irq: %d\n", irq);
+ return irq;
}
clk = devm_clk_get(dev, "spi");
--
2.17.1
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Al Viro <[email protected]>
commit 169b803397499be85bdd1e3d07d6f5e3d4bd669e upstream.
the victim might've been rmdir'ed just before the lock_rename();
unlike the normal callers, we do not look the source up after the
parents are locked - we know it beforehand and just recheck that it's
still the child of what used to be its parent. Unfortunately,
the check is too weak - we don't spot a dead directory since its
->d_parent is unchanged, dentry is positive, etc. So we sail all
the way to ->rename(), with hosting filesystems _not_ expecting
to be asked renaming an rmdir'ed subdirectory.
The fix is easy, fortunately - the lock on parent is sufficient for
making IS_DEADDIR() on child safe.
Cc: [email protected]
Fixes: 9ae326a69004 (CacheFiles: A cache that backs onto a mounted filesystem)
Signed-off-by: Al Viro <[email protected]>
Signed-off-by: David Howells <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/cachefiles/namei.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/fs/cachefiles/namei.c
+++ b/fs/cachefiles/namei.c
@@ -317,7 +317,7 @@ try_again:
trap = lock_rename(cache->graveyard, dir);
/* do some checks before getting the grave dentry */
- if (rep->d_parent != dir) {
+ if (rep->d_parent != dir || IS_DEADDIR(d_inode(rep))) {
/* the entry was probably culled when we dropped the parent dir
* lock */
unlock_rename(cache->graveyard, dir);
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit d312fefea8387503375f728855c9a62de20c9665 ]
ahci_pci_reset_controller() calls ahci_reset_controller(), which may
fail, but ignores the result code and always returns success. This
may result in failures like below
ahci 0000:02:00.0: version 3.0
ahci 0000:02:00.0: enabling device (0000 -> 0003)
ahci 0000:02:00.0: SSS flag set, parallel bus scan disabled
ahci 0000:02:00.0: controller reset failed (0xffffffff)
ahci 0000:02:00.0: failed to stop engine (-5)
... repeated many times ...
ahci 0000:02:00.0: failed to stop engine (-5)
Unable to handle kernel paging request at virtual address ffff0000093f9018
...
PC is at ahci_stop_engine+0x5c/0xd8 [libahci]
LR is at ahci_deinit_port.constprop.12+0x1c/0xc0 [libahci]
...
[<ffff000000a17014>] ahci_stop_engine+0x5c/0xd8 [libahci]
[<ffff000000a196b4>] ahci_deinit_port.constprop.12+0x1c/0xc0 [libahci]
[<ffff000000a197d8>] ahci_init_controller+0x80/0x168 [libahci]
[<ffff000000a260f8>] ahci_pci_init_controller+0x60/0x68 [ahci]
[<ffff000000a26f94>] ahci_init_one+0x75c/0xd88 [ahci]
[<ffff000008430324>] local_pci_probe+0x3c/0xb8
[<ffff000008431728>] pci_device_probe+0x138/0x170
[<ffff000008585e54>] driver_probe_device+0x2dc/0x458
[<ffff0000085860e4>] __driver_attach+0x114/0x118
[<ffff000008583ca8>] bus_for_each_dev+0x60/0xa0
[<ffff000008585638>] driver_attach+0x20/0x28
[<ffff0000085850b0>] bus_add_driver+0x1f0/0x2a8
[<ffff000008586ae0>] driver_register+0x60/0xf8
[<ffff00000842f9b4>] __pci_register_driver+0x3c/0x48
[<ffff000000a3001c>] ahci_pci_driver_init+0x1c/0x1000 [ahci]
[<ffff000008083918>] do_one_initcall+0x38/0x120
where an obvious hardware level failure results in an unnecessary 15 second
delay and a subsequent crash.
So record the result code of ahci_reset_controller() and relay it, rather
than ignoring it.
Signed-off-by: Ard Biesheuvel <[email protected]>
Signed-off-by: Tejun Heo <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/ata/ahci.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index 34fdaa6e99ba..5f1f049063dd 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -619,8 +619,11 @@ static void ahci_pci_save_initial_config(struct pci_dev *pdev,
static int ahci_pci_reset_controller(struct ata_host *host)
{
struct pci_dev *pdev = to_pci_dev(host->dev);
+ int rc;
- ahci_reset_controller(host);
+ rc = ahci_reset_controller(host);
+ if (rc)
+ return rc;
if (pdev->vendor == PCI_VENDOR_ID_INTEL) {
struct ahci_host_priv *hpriv = host->private_data;
--
2.17.1
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 9039f3ef446e9ffa200200c934f049add9e58426 ]
The SCTP program may sleep under a spinlock, and the function call path is:
sctp_generate_t3_rtx_event (acquire the spinlock)
sctp_do_sm
sctp_side_effects
sctp_cmd_interpreter
sctp_make_init_ack
sctp_pack_cookie
crypto_shash_setkey
shash_setkey_unaligned
kmalloc(GFP_KERNEL)
For the same reason, the orinoco driver may sleep in interrupt handler,
and the function call path is:
orinoco_rx_isr_tasklet
orinoco_rx
orinoco_mic
crypto_shash_setkey
shash_setkey_unaligned
kmalloc(GFP_KERNEL)
To fix it, GFP_KERNEL is replaced with GFP_ATOMIC.
This bug is found by my static analysis tool and my code review.
Signed-off-by: Jia-Ju Bai <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
crypto/shash.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/crypto/shash.c b/crypto/shash.c
index 5444b429e35d..4f89f78031e2 100644
--- a/crypto/shash.c
+++ b/crypto/shash.c
@@ -41,7 +41,7 @@ static int shash_setkey_unaligned(struct crypto_shash *tfm, const u8 *key,
int err;
absize = keylen + (alignmask & ~(crypto_tfm_ctx_alignment() - 1));
- buffer = kmalloc(absize, GFP_KERNEL);
+ buffer = kmalloc(absize, GFP_ATOMIC);
if (!buffer)
return -ENOMEM;
--
2.17.1
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 11887ed172a6960673f130dad8f8fb42778f64d7 ]
Commit 34c2f668d0f6b ("MIPS: microMIPS: Add unaligned access support.")
added fairly broken support for handling 16bit microMIPS instructions in
get_frame_info(). It adjusts the instruction pointer by 16bits in the
case of a 16bit sp move instruction, but not any other 16bit
instruction.
Commit b6c7a324df37 ("MIPS: Fix get_frame_info() handling of microMIPS
function size") goes some way to fixing get_frame_info() to iterate over
microMIPS instuctions, but the instruction pointer is still manipulated
using a postincrement, and is of union mips_instruction type. Since the
union is sized to the largest member (a word), but microMIPS
instructions are a mix of halfword and word sizes, the function does not
always iterate correctly, ending up misaligned with the instruction
stream and interpreting it incorrectly.
Since the instruction modifying the stack pointer is usually the first
in the function, that one is usually handled correctly. But the
instruction which saves the return address to the sp is some variable
number of instructions into the frame and is frequently missed due to
not being on a word boundary, leading to incomplete walking of the
stack.
Fix this by incrementing the instruction pointer based on the size of
the previously decoded instruction (& remove the hack introduced by
commit 34c2f668d0f6b ("MIPS: microMIPS: Add unaligned access support.")
which adjusts the instruction pointer in the case of a 16bit sp move
instruction, but not any other).
Fixes: 34c2f668d0f6b ("MIPS: microMIPS: Add unaligned access support.")
Signed-off-by: Matt Redfearn <[email protected]>
Cc: Marcin Nowakowski <[email protected]>
Cc: James Hogan <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Paul Burton <[email protected]>
Cc: [email protected]
Cc: [email protected]
Patchwork: https://patchwork.linux-mips.org/patch/16953/
Signed-off-by: Ralf Baechle <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/mips/kernel/process.c | 9 ++++++---
1 file changed, 6 insertions(+), 3 deletions(-)
diff --git a/arch/mips/kernel/process.c b/arch/mips/kernel/process.c
index ed6cac4a4df0..a9cc74354df8 100644
--- a/arch/mips/kernel/process.c
+++ b/arch/mips/kernel/process.c
@@ -341,6 +341,7 @@ static int get_frame_info(struct mips_frame_info *info)
bool is_mmips = IS_ENABLED(CONFIG_CPU_MICROMIPS);
union mips_instruction insn, *ip, *ip_end;
const unsigned int max_insns = 128;
+ unsigned int last_insn_size = 0;
unsigned int i;
info->pc_offset = -1;
@@ -352,15 +353,19 @@ static int get_frame_info(struct mips_frame_info *info)
ip_end = (void *)ip + info->func_size;
- for (i = 0; i < max_insns && ip < ip_end; i++, ip++) {
+ for (i = 0; i < max_insns && ip < ip_end; i++) {
+ ip = (void *)ip + last_insn_size;
if (is_mmips && mm_insn_16bit(ip->halfword[0])) {
insn.halfword[0] = 0;
insn.halfword[1] = ip->halfword[0];
+ last_insn_size = 2;
} else if (is_mmips) {
insn.halfword[0] = ip->halfword[1];
insn.halfword[1] = ip->halfword[0];
+ last_insn_size = 4;
} else {
insn.word = ip->word;
+ last_insn_size = 4;
}
if (is_jump_ins(&insn))
@@ -382,8 +387,6 @@ static int get_frame_info(struct mips_frame_info *info)
tmp = (ip->halfword[0] >> 1);
info->frame_size = -(signed short)(tmp & 0xf);
}
- ip = (void *) &ip->halfword[1];
- ip--;
} else
#endif
info->frame_size = - ip->i_format.simmediate;
--
2.17.1
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Peter Zijlstra <[email protected]>
commit b59167ac7bafd804c91e49ad53c6d33a7394d4c8 upstream.
Eric reported that a sequence count loop using this_cpu_read() got
optimized out. This is wrong, this_cpu_read() must imply READ_ONCE()
because the interface is IRQ-safe, therefore an interrupt can have
changed the per-cpu value.
Fixes: 7c3576d261ce ("[PATCH] i386: Convert PDA into the percpu section")
Reported-by: Eric Dumazet <[email protected]>
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Signed-off-by: Thomas Gleixner <[email protected]>
Acked-by: Eric Dumazet <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/include/asm/percpu.h | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
--- a/arch/x86/include/asm/percpu.h
+++ b/arch/x86/include/asm/percpu.h
@@ -184,22 +184,22 @@ do { \
typeof(var) pfo_ret__; \
switch (sizeof(var)) { \
case 1: \
- asm(op "b "__percpu_arg(1)",%0" \
+ asm volatile(op "b "__percpu_arg(1)",%0"\
: "=q" (pfo_ret__) \
: "m" (var)); \
break; \
case 2: \
- asm(op "w "__percpu_arg(1)",%0" \
+ asm volatile(op "w "__percpu_arg(1)",%0"\
: "=r" (pfo_ret__) \
: "m" (var)); \
break; \
case 4: \
- asm(op "l "__percpu_arg(1)",%0" \
+ asm volatile(op "l "__percpu_arg(1)",%0"\
: "=r" (pfo_ret__) \
: "m" (var)); \
break; \
case 8: \
- asm(op "q "__percpu_arg(1)",%0" \
+ asm volatile(op "q "__percpu_arg(1)",%0"\
: "=r" (pfo_ret__) \
: "m" (var)); \
break; \
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Cong Wang <[email protected]>
[ Upstream commit 7de414a9dd91426318df7b63da024b2b07e53df5 ]
Most callers of pskb_trim_rcsum() simply drop the skb when
it fails, however, ip_check_defrag() still continues to pass
the skb up to stack. This is suspicious.
In ip_check_defrag(), after we learn the skb is an IP fragment,
passing the skb to callers makes no sense, because callers expect
fragments are defrag'ed on success. So, dropping the skb when we
can't defrag it is reasonable.
Note, prior to commit 88078d98d1bb, this is not a big problem as
checksum will be fixed up anyway. After it, the checksum is not
correct on failure.
Found this during code review.
Fixes: 88078d98d1bb ("net: pskb_trim_rcsum() and CHECKSUM_COMPLETE are friends")
Cc: Eric Dumazet <[email protected]>
Signed-off-by: Cong Wang <[email protected]>
Reviewed-by: Eric Dumazet <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/ipv4/ip_fragment.c | 12 ++++++++----
1 file changed, 8 insertions(+), 4 deletions(-)
--- a/net/ipv4/ip_fragment.c
+++ b/net/ipv4/ip_fragment.c
@@ -716,10 +716,14 @@ struct sk_buff *ip_check_defrag(struct n
if (ip_is_fragment(&iph)) {
skb = skb_share_check(skb, GFP_ATOMIC);
if (skb) {
- if (!pskb_may_pull(skb, netoff + iph.ihl * 4))
- return skb;
- if (pskb_trim_rcsum(skb, netoff + len))
- return skb;
+ if (!pskb_may_pull(skb, netoff + iph.ihl * 4)) {
+ kfree_skb(skb);
+ return NULL;
+ }
+ if (pskb_trim_rcsum(skb, netoff + len)) {
+ kfree_skb(skb);
+ return NULL;
+ }
memset(IPCB(skb), 0, sizeof(struct inet_skb_parm));
if (ip_defrag(net, skb, user))
return NULL;
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Gustavo A. R. Silva <[email protected]>
commit efa61c8cf2950ab5c0e66cff3cabe2a2b24e81ba upstream.
pin_index can be indirectly controlled by user-space, hence leading
to a potential exploitation of the Spectre variant 1 vulnerability.
This issue was detected with the help of Smatch:
drivers/ptp/ptp_chardev.c:253 ptp_ioctl() warn: potential spectre issue
'ops->pin_config' [r] (local cap)
Fix this by sanitizing pin_index before using it to index
ops->pin_config, and before passing it as an argument to
function ptp_set_pinfunc(), in which it is used to index
info->pin_config.
Notice that given that speculation windows are large, the policy is
to kill the speculation on the first load and not worry if it can be
completed with a dependent load/store [1].
[1] https://marc.info/?l=linux-kernel&m=152449131114778&w=2
Cc: [email protected]
Signed-off-by: Gustavo A. R. Silva <[email protected]>
Acked-by: Richard Cochran <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/ptp/ptp_chardev.c | 4 ++++
1 file changed, 4 insertions(+)
--- a/drivers/ptp/ptp_chardev.c
+++ b/drivers/ptp/ptp_chardev.c
@@ -23,6 +23,8 @@
#include <linux/sched.h>
#include <linux/slab.h>
+#include <linux/nospec.h>
+
#include "ptp_private.h"
static int ptp_disable_pinfunc(struct ptp_clock_info *ops,
@@ -224,6 +226,7 @@ long ptp_ioctl(struct posix_clock *pc, u
err = -EINVAL;
break;
}
+ pin_index = array_index_nospec(pin_index, ops->n_pins);
if (mutex_lock_interruptible(&ptp->pincfg_mux))
return -ERESTARTSYS;
pd = ops->pin_config[pin_index];
@@ -242,6 +245,7 @@ long ptp_ioctl(struct posix_clock *pc, u
err = -EINVAL;
break;
}
+ pin_index = array_index_nospec(pin_index, ops->n_pins);
if (mutex_lock_interruptible(&ptp->pincfg_mux))
return -ERESTARTSYS;
err = ptp_set_pinfunc(ptp, pin_index, pd.func, pd.chan);
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jakub Kicinski <[email protected]>
[ Upstream commit 38b4f18d56372e1e21771ab7b0357b853330186c ]
gred_change_table_def() takes a pointer to TCA_GRED_DPS attribute,
and expects it will be able to interpret its contents as
struct tc_gred_sopt. Pass the correct gred attribute, instead of
TCA_OPTIONS.
This bug meant the table definition could never be changed after
Qdisc was initialized (unless whatever TCA_OPTIONS contained both
passed netlink validation and was a valid struct tc_gred_sopt...).
Old behaviour:
$ ip link add type dummy
$ tc qdisc replace dev dummy0 parent root handle 7: \
gred setup vqs 4 default 0
$ tc qdisc replace dev dummy0 parent root handle 7: \
gred setup vqs 4 default 0
RTNETLINK answers: Invalid argument
Now:
$ ip link add type dummy
$ tc qdisc replace dev dummy0 parent root handle 7: \
gred setup vqs 4 default 0
$ tc qdisc replace dev dummy0 parent root handle 7: \
gred setup vqs 4 default 0
$ tc qdisc replace dev dummy0 parent root handle 7: \
gred setup vqs 4 default 0
Fixes: f62d6b936df5 ("[PKT_SCHED]: GRED: Use central VQ change procedure")
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/sched/sch_gred.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/net/sched/sch_gred.c
+++ b/net/sched/sch_gred.c
@@ -444,7 +444,7 @@ static int gred_change(struct Qdisc *sch
if (tb[TCA_GRED_PARMS] == NULL && tb[TCA_GRED_STAB] == NULL) {
if (tb[TCA_GRED_LIMIT] != NULL)
sch->limit = nla_get_u32(tb[TCA_GRED_LIMIT]);
- return gred_change_table_def(sch, opt);
+ return gred_change_table_def(sch, tb[TCA_GRED_DPS]);
}
if (tb[TCA_GRED_PARMS] == NULL ||
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Hangbin Liu <[email protected]>
commit 5a2de63fd1a59c30c02526d427bc014b98adf508 upstream.
Based on RFC 4541, 2.1.1. IGMP Forwarding Rules
The switch supporting IGMP snooping must maintain a list of
multicast routers and the ports on which they are attached. This
list can be constructed in any combination of the following ways:
a) This list should be built by the snooping switch sending
Multicast Router Solicitation messages as described in IGMP
Multicast Router Discovery [MRDISC]. It may also snoop
Multicast Router Advertisement messages sent by and to other
nodes.
b) The arrival port for IGMP Queries (sent by multicast routers)
where the source address is not 0.0.0.0.
We should not add the port to router list when receives query with source
0.0.0.0.
Reported-by: Ying Xu <[email protected]>
Signed-off-by: Hangbin Liu <[email protected]>
Acked-by: Nikolay Aleksandrov <[email protected]>
Acked-by: Roopa Prabhu <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/bridge/br_multicast.c | 10 +++++++++-
1 file changed, 9 insertions(+), 1 deletion(-)
--- a/net/bridge/br_multicast.c
+++ b/net/bridge/br_multicast.c
@@ -1261,7 +1261,15 @@ static void br_multicast_query_received(
return;
br_multicast_update_query_timer(br, query, max_delay);
- br_multicast_mark_router(br, port);
+
+ /* Based on RFC4541, section 2.1.1 IGMP Forwarding Rules,
+ * the arrival port for IGMP Queries where the source address
+ * is 0.0.0.0 should not be added to router port list.
+ */
+ if ((saddr->proto == htons(ETH_P_IP) && saddr->u.ip4) ||
+ (saddr->proto == htons(ETH_P_IPV6) &&
+ !ipv6_addr_any(&saddr->u.ip6)))
+ br_multicast_mark_router(br, port);
}
static int br_ip4_multicast_query(struct net_bridge *br,
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 68fe55680d0f3342969f49412fceabb90bdfadba ]
Fix a commit 3021773c7c3e ("MIPS: DEC: Avoid la pseudo-instruction in
delay slots") regression and remove assembly errors:
arch/mips/dec/int-handler.S: Assembler messages:
arch/mips/dec/int-handler.S:162: Error: Macro used $at after ".set noat"
arch/mips/dec/int-handler.S:163: Error: Macro used $at after ".set noat"
arch/mips/dec/int-handler.S:229: Error: Macro used $at after ".set noat"
arch/mips/dec/int-handler.S:230: Error: Macro used $at after ".set noat"
triggering with with the CPU_DADDI_WORKAROUNDS option set and the DADDIU
instruction. This is because with that option in place the instruction
becomes a macro, which expands to an LI/DADDU (or actually ADDIU/DADDU)
sequence that uses $at as a temporary register.
With CPU_DADDI_WORKAROUNDS we only support `-msym32' compilation though,
and this is already enforced in arch/mips/Makefile, so choose the 32-bit
expansion variant for the supported configurations and then replace the
64-bit variant with #error just in case.
Fixes: 3021773c7c3e ("MIPS: DEC: Avoid la pseudo-instruction in delay slots")
Signed-off-by: Maciej W. Rozycki <[email protected]>
Cc: [email protected]
Cc: [email protected] # 4.8+
Patchwork: https://patchwork.linux-mips.org/patch/16893/
Signed-off-by: Ralf Baechle <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/mips/dec/int-handler.S | 34 ++++++----------------------------
1 file changed, 6 insertions(+), 28 deletions(-)
diff --git a/arch/mips/dec/int-handler.S b/arch/mips/dec/int-handler.S
index 554d1da97743..21f4a9fe82fa 100644
--- a/arch/mips/dec/int-handler.S
+++ b/arch/mips/dec/int-handler.S
@@ -147,23 +147,12 @@
* Find irq with highest priority
*/
# open coded PTR_LA t1, cpu_mask_nr_tbl
-#if (_MIPS_SZPTR == 32)
+#if defined(CONFIG_32BIT) || defined(KBUILD_64BIT_SYM32)
# open coded la t1, cpu_mask_nr_tbl
lui t1, %hi(cpu_mask_nr_tbl)
addiu t1, %lo(cpu_mask_nr_tbl)
-
-#endif
-#if (_MIPS_SZPTR == 64)
- # open coded dla t1, cpu_mask_nr_tbl
- .set push
- .set noat
- lui t1, %highest(cpu_mask_nr_tbl)
- lui AT, %hi(cpu_mask_nr_tbl)
- daddiu t1, t1, %higher(cpu_mask_nr_tbl)
- daddiu AT, AT, %lo(cpu_mask_nr_tbl)
- dsll t1, 32
- daddu t1, t1, AT
- .set pop
+#else
+#error GCC `-msym32' option required for 64-bit DECstation builds
#endif
1: lw t2,(t1)
nop
@@ -214,23 +203,12 @@
* Find irq with highest priority
*/
# open coded PTR_LA t1,asic_mask_nr_tbl
-#if (_MIPS_SZPTR == 32)
+#if defined(CONFIG_32BIT) || defined(KBUILD_64BIT_SYM32)
# open coded la t1, asic_mask_nr_tbl
lui t1, %hi(asic_mask_nr_tbl)
addiu t1, %lo(asic_mask_nr_tbl)
-
-#endif
-#if (_MIPS_SZPTR == 64)
- # open coded dla t1, asic_mask_nr_tbl
- .set push
- .set noat
- lui t1, %highest(asic_mask_nr_tbl)
- lui AT, %hi(asic_mask_nr_tbl)
- daddiu t1, t1, %higher(asic_mask_nr_tbl)
- daddiu AT, AT, %lo(asic_mask_nr_tbl)
- dsll t1, 32
- daddu t1, t1, AT
- .set pop
+#else
+#error GCC `-msym32' option required for 64-bit DECstation builds
#endif
2: lw t2,(t1)
nop
--
2.17.1
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit ac081c3be3fae6d0cc3e1862507fca3862d30b67 ]
On non-preempt kernels this loop can take a long time (more than 50 ticks)
processing through entries.
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Khazhismel Kumykov <[email protected]>
Acked-by: OGAWA Hirofumi <[email protected]>
Reviewed-by: Andrew Morton <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/fat/fatent.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/fs/fat/fatent.c b/fs/fat/fatent.c
index a70e37c47a78..e3fc477728b3 100644
--- a/fs/fat/fatent.c
+++ b/fs/fat/fatent.c
@@ -681,6 +681,7 @@ int fat_count_free_clusters(struct super_block *sb)
if (ops->ent_get(&fatent) == FAT_ENT_FREE)
free++;
} while (fat_ent_next(sbi, &fatent));
+ cond_resched();
}
sbi->free_clusters = free;
sbi->free_clus_valid = 1;
--
2.17.1
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jason Wang <[email protected]>
[ Upstream commit ff002269a4ee9c769dbf9365acef633ebcbd6cbe ]
The idx in vhost_vring_ioctl() was controlled by userspace, hence a
potential exploitation of the Spectre variant 1 vulnerability.
Fixing this by sanitizing idx before using it to index d->vqs.
Cc: Michael S. Tsirkin <[email protected]>
Cc: Josh Poimboeuf <[email protected]>
Cc: Andrea Arcangeli <[email protected]>
Signed-off-by: Jason Wang <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/vhost/vhost.c | 2 ++
1 file changed, 2 insertions(+)
--- a/drivers/vhost/vhost.c
+++ b/drivers/vhost/vhost.c
@@ -27,6 +27,7 @@
#include <linux/cgroup.h>
#include <linux/module.h>
#include <linux/sort.h>
+#include <linux/nospec.h>
#include "vhost.h"
@@ -748,6 +749,7 @@ long vhost_vring_ioctl(struct vhost_dev
if (idx >= d->nvqs)
return -ENOBUFS;
+ idx = array_index_nospec(idx, d->nvqs);
vq = d->vqs[idx];
mutex_lock(&vq->mutex);
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Ido Schimmel <[email protected]>
[ Upstream commit da71577545a52be3e0e9225a946e5fd79cfab015 ]
When an FDB entry is configured, the address is validated to have the
length of an Ethernet address, but the device for which the address is
configured can be of any type.
The above can result in the use of uninitialized memory when the address
is later compared against existing addresses since 'dev->addr_len' is
used and it may be greater than ETH_ALEN, as with ip6tnl devices.
Fix this by making sure that FDB entries are only configured for
Ethernet devices.
BUG: KMSAN: uninit-value in memcmp+0x11d/0x180 lib/string.c:863
CPU: 1 PID: 4318 Comm: syz-executor998 Not tainted 4.19.0-rc3+ #49
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS
Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x14b/0x190 lib/dump_stack.c:113
kmsan_report+0x183/0x2b0 mm/kmsan/kmsan.c:956
__msan_warning+0x70/0xc0 mm/kmsan/kmsan_instr.c:645
memcmp+0x11d/0x180 lib/string.c:863
dev_uc_add_excl+0x165/0x7b0 net/core/dev_addr_lists.c:464
ndo_dflt_fdb_add net/core/rtnetlink.c:3463 [inline]
rtnl_fdb_add+0x1081/0x1270 net/core/rtnetlink.c:3558
rtnetlink_rcv_msg+0xa0b/0x1530 net/core/rtnetlink.c:4715
netlink_rcv_skb+0x36e/0x5f0 net/netlink/af_netlink.c:2454
rtnetlink_rcv+0x50/0x60 net/core/rtnetlink.c:4733
netlink_unicast_kernel net/netlink/af_netlink.c:1317 [inline]
netlink_unicast+0x1638/0x1720 net/netlink/af_netlink.c:1343
netlink_sendmsg+0x1205/0x1290 net/netlink/af_netlink.c:1908
sock_sendmsg_nosec net/socket.c:621 [inline]
sock_sendmsg net/socket.c:631 [inline]
___sys_sendmsg+0xe70/0x1290 net/socket.c:2114
__sys_sendmsg net/socket.c:2152 [inline]
__do_sys_sendmsg net/socket.c:2161 [inline]
__se_sys_sendmsg+0x2a3/0x3d0 net/socket.c:2159
__x64_sys_sendmsg+0x4a/0x70 net/socket.c:2159
do_syscall_64+0xb8/0x100 arch/x86/entry/common.c:291
entry_SYSCALL_64_after_hwframe+0x63/0xe7
RIP: 0033:0x440ee9
Code: e8 cc ab 02 00 48 83 c4 18 c3 0f 1f 80 00 00 00 00 48 89 f8 48 89 f7
48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff
ff 0f 83 bb 0a fc ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:00007fff6a93b518 EFLAGS: 00000213 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 0000000000440ee9
RDX: 0000000000000000 RSI: 0000000020000240 RDI: 0000000000000003
RBP: 0000000000000000 R08: 00000000004002c8 R09: 00000000004002c8
R10: 00000000004002c8 R11: 0000000000000213 R12: 000000000000b4b0
R13: 0000000000401ec0 R14: 0000000000000000 R15: 0000000000000000
Uninit was created at:
kmsan_save_stack_with_flags mm/kmsan/kmsan.c:256 [inline]
kmsan_internal_poison_shadow+0xb8/0x1b0 mm/kmsan/kmsan.c:181
kmsan_kmalloc+0x98/0x100 mm/kmsan/kmsan_hooks.c:91
kmsan_slab_alloc+0x10/0x20 mm/kmsan/kmsan_hooks.c:100
slab_post_alloc_hook mm/slab.h:446 [inline]
slab_alloc_node mm/slub.c:2718 [inline]
__kmalloc_node_track_caller+0x9e7/0x1160 mm/slub.c:4351
__kmalloc_reserve net/core/skbuff.c:138 [inline]
__alloc_skb+0x2f5/0x9e0 net/core/skbuff.c:206
alloc_skb include/linux/skbuff.h:996 [inline]
netlink_alloc_large_skb net/netlink/af_netlink.c:1189 [inline]
netlink_sendmsg+0xb49/0x1290 net/netlink/af_netlink.c:1883
sock_sendmsg_nosec net/socket.c:621 [inline]
sock_sendmsg net/socket.c:631 [inline]
___sys_sendmsg+0xe70/0x1290 net/socket.c:2114
__sys_sendmsg net/socket.c:2152 [inline]
__do_sys_sendmsg net/socket.c:2161 [inline]
__se_sys_sendmsg+0x2a3/0x3d0 net/socket.c:2159
__x64_sys_sendmsg+0x4a/0x70 net/socket.c:2159
do_syscall_64+0xb8/0x100 arch/x86/entry/common.c:291
entry_SYSCALL_64_after_hwframe+0x63/0xe7
v2:
* Make error message more specific (David)
Fixes: 090096bf3db1 ("net: generic fdb support for drivers without ndo_fdb_<op>")
Signed-off-by: Ido Schimmel <[email protected]>
Reported-and-tested-by: [email protected]
Reported-and-tested-by: [email protected]
Cc: Vlad Yasevich <[email protected]>
Cc: David Ahern <[email protected]>
Reviewed-by: David Ahern <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/core/rtnetlink.c | 10 ++++++++++
1 file changed, 10 insertions(+)
--- a/net/core/rtnetlink.c
+++ b/net/core/rtnetlink.c
@@ -2734,6 +2734,11 @@ static int rtnl_fdb_add(struct sk_buff *
return -EINVAL;
}
+ if (dev->type != ARPHRD_ETHER) {
+ pr_info("PF_BRIDGE: FDB add only supported for Ethernet devices");
+ return -EINVAL;
+ }
+
addr = nla_data(tb[NDA_LLADDR]);
err = fdb_vid_parse(tb[NDA_VLAN], &vid);
@@ -2836,6 +2841,11 @@ static int rtnl_fdb_del(struct sk_buff *
return -EINVAL;
}
+ if (dev->type != ARPHRD_ETHER) {
+ pr_info("PF_BRIDGE: FDB delete only supported for Ethernet devices");
+ return -EINVAL;
+ }
+
addr = nla_data(tb[NDA_LLADDR]);
err = fdb_vid_parse(tb[NDA_VLAN], &vid);
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Linus Torvalds <[email protected]>
Commit eb66ae030829605d61fbef1909ce310e29f78821 upstream.
This is a backport to stable 4.4.y.
Jann Horn points out that our TLB flushing was subtly wrong for the
mremap() case. What makes mremap() special is that we don't follow the
usual "add page to list of pages to be freed, then flush tlb, and then
free pages". No, mremap() obviously just _moves_ the page from one page
table location to another.
That matters, because mremap() thus doesn't directly control the
lifetime of the moved page with a freelist: instead, the lifetime of the
page is controlled by the page table locking, that serializes access to
the entry.
As a result, we need to flush the TLB not just before releasing the lock
for the source location (to avoid any concurrent accesses to the entry),
but also before we release the destination page table lock (to avoid the
TLB being flushed after somebody else has already done something to that
page).
This also makes the whole "need_flush" logic unnecessary, since we now
always end up flushing the TLB for every valid entry.
Reported-and-tested-by: Jann Horn <[email protected]>
Acked-by: Will Deacon <[email protected]>
Tested-by: Ingo Molnar <[email protected]>
Acked-by: Peter Zijlstra (Intel) <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
[will: backport to 4.4 stable]
Signed-off-by: Will Deacon <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
mm/huge_memory.c | 6 +++++-
mm/mremap.c | 21 ++++++++++++++++-----
2 files changed, 21 insertions(+), 6 deletions(-)
--- a/mm/huge_memory.c
+++ b/mm/huge_memory.c
@@ -1511,7 +1511,7 @@ int move_huge_pmd(struct vm_area_struct
spinlock_t *old_ptl, *new_ptl;
int ret = 0;
pmd_t pmd;
-
+ bool force_flush = false;
struct mm_struct *mm = vma->vm_mm;
if ((old_addr & ~HPAGE_PMD_MASK) ||
@@ -1539,6 +1539,8 @@ int move_huge_pmd(struct vm_area_struct
if (new_ptl != old_ptl)
spin_lock_nested(new_ptl, SINGLE_DEPTH_NESTING);
pmd = pmdp_huge_get_and_clear(mm, old_addr, old_pmd);
+ if (pmd_present(pmd))
+ force_flush = true;
VM_BUG_ON(!pmd_none(*new_pmd));
if (pmd_move_must_withdraw(new_ptl, old_ptl)) {
@@ -1547,6 +1549,8 @@ int move_huge_pmd(struct vm_area_struct
pgtable_trans_huge_deposit(mm, new_pmd, pgtable);
}
set_pmd_at(mm, new_addr, new_pmd, pmd_mksoft_dirty(pmd));
+ if (force_flush)
+ flush_tlb_range(vma, old_addr, old_addr + PMD_SIZE);
if (new_ptl != old_ptl)
spin_unlock(new_ptl);
spin_unlock(old_ptl);
--- a/mm/mremap.c
+++ b/mm/mremap.c
@@ -96,6 +96,8 @@ static void move_ptes(struct vm_area_str
struct mm_struct *mm = vma->vm_mm;
pte_t *old_pte, *new_pte, pte;
spinlock_t *old_ptl, *new_ptl;
+ bool force_flush = false;
+ unsigned long len = old_end - old_addr;
/*
* When need_rmap_locks is true, we take the i_mmap_rwsem and anon_vma
@@ -143,12 +145,26 @@ static void move_ptes(struct vm_area_str
if (pte_none(*old_pte))
continue;
pte = ptep_get_and_clear(mm, old_addr, old_pte);
+ /*
+ * If we are remapping a valid PTE, make sure
+ * to flush TLB before we drop the PTL for the PTE.
+ *
+ * NOTE! Both old and new PTL matter: the old one
+ * for racing with page_mkclean(), the new one to
+ * make sure the physical page stays valid until
+ * the TLB entry for the old mapping has been
+ * flushed.
+ */
+ if (pte_present(pte))
+ force_flush = true;
pte = move_pte(pte, new_vma->vm_page_prot, old_addr, new_addr);
pte = move_soft_dirty_pte(pte);
set_pte_at(mm, new_addr, new_pte, pte);
}
arch_leave_lazy_mmu_mode();
+ if (force_flush)
+ flush_tlb_range(vma, old_end - len, old_end);
if (new_ptl != old_ptl)
spin_unlock(new_ptl);
pte_unmap(new_pte - 1);
@@ -168,7 +184,6 @@ unsigned long move_page_tables(struct vm
{
unsigned long extent, next, old_end;
pmd_t *old_pmd, *new_pmd;
- bool need_flush = false;
unsigned long mmun_start; /* For mmu_notifiers */
unsigned long mmun_end; /* For mmu_notifiers */
@@ -207,7 +222,6 @@ unsigned long move_page_tables(struct vm
anon_vma_unlock_write(vma->anon_vma);
}
if (err > 0) {
- need_flush = true;
continue;
} else if (!err) {
split_huge_page_pmd(vma, old_addr, old_pmd);
@@ -224,10 +238,7 @@ unsigned long move_page_tables(struct vm
extent = LATENCY_LIMIT;
move_ptes(vma, old_pmd, old_addr, old_addr + extent,
new_vma, new_pmd, new_addr, need_rmap_locks);
- need_flush = true;
}
- if (likely(need_flush))
- flush_tlb_range(vma, old_end-len, old_addr);
mmu_notifier_invalidate_range_end(vma->vm_mm, mmun_start, mmun_end);
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit cea8cd498f4f1c30ea27e3664b3c671e495c4fce ]
When the immediate encoded in the instruction is accessed, it is sign
extended due to being a signed value being assigned to a signed integer.
The ISA specifies that this operation is an unsigned operation.
The sign extension leads us to incorrectly decode:
801e9c8e: cbf1 sw ra,68(sp)
As having an immediate of 1073741809.
Since the instruction format does not specify signed/unsigned, and this
is currently the only location to use this instuction format, change it
to an unsigned immediate.
Fixes: bb9bc4689b9c ("MIPS: Calculate microMIPS ra properly when unwinding the stack")
Suggested-by: Paul Burton <[email protected]>
Signed-off-by: Matt Redfearn <[email protected]>
Reviewed-by: James Hogan <[email protected]>
Cc: Marcin Nowakowski <[email protected]>
Cc: Miodrag Dinic <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: David Daney <[email protected]>
Cc: [email protected]
Cc: [email protected]
Patchwork: https://patchwork.linux-mips.org/patch/16957/
Signed-off-by: Ralf Baechle <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/mips/include/uapi/asm/inst.h | 2 +-
arch/mips/kernel/process.c | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/mips/include/uapi/asm/inst.h b/arch/mips/include/uapi/asm/inst.h
index 9b44d5a816fa..1b6f2f219298 100644
--- a/arch/mips/include/uapi/asm/inst.h
+++ b/arch/mips/include/uapi/asm/inst.h
@@ -846,7 +846,7 @@ struct mm16_r3_format { /* Load from global pointer format */
struct mm16_r5_format { /* Load/store from stack pointer format */
__BITFIELD_FIELD(unsigned int opcode : 6,
__BITFIELD_FIELD(unsigned int rt : 5,
- __BITFIELD_FIELD(signed int simmediate : 5,
+ __BITFIELD_FIELD(unsigned int imm : 5,
__BITFIELD_FIELD(unsigned int : 16, /* Ignored */
;))))
};
diff --git a/arch/mips/kernel/process.c b/arch/mips/kernel/process.c
index a9cc74354df8..ebd8a715fe38 100644
--- a/arch/mips/kernel/process.c
+++ b/arch/mips/kernel/process.c
@@ -207,7 +207,7 @@ static inline int is_ra_save_ins(union mips_instruction *ip, int *poff)
if (ip->mm16_r5_format.rt != 31)
return 0;
- *poff = ip->mm16_r5_format.simmediate;
+ *poff = ip->mm16_r5_format.imm;
*poff = (*poff << 2) / sizeof(ulong);
return 1;
--
2.17.1
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Marcelo Ricardo Leitner <[email protected]>
[ Upstream commit b336decab22158937975293aea79396525f92bb3 ]
syzbot reported an use-after-free involving sctp_id2asoc. Dmitry Vyukov
helped to root cause it and it is because of reading the asoc after it
was freed:
CPU 1 CPU 2
(working on socket 1) (working on socket 2)
sctp_association_destroy
sctp_id2asoc
spin lock
grab the asoc from idr
spin unlock
spin lock
remove asoc from idr
spin unlock
free(asoc)
if asoc->base.sk != sk ... [*]
This can only be hit if trying to fetch asocs from different sockets. As
we have a single IDR for all asocs, in all SCTP sockets, their id is
unique on the system. An application can try to send stuff on an id
that matches on another socket, and the if in [*] will protect from such
usage. But it didn't consider that as that asoc may belong to another
socket, it may be freed in parallel (read: under another socket lock).
We fix it by moving the checks in [*] into the protected region. This
fixes it because the asoc cannot be freed while the lock is held.
Reported-by: [email protected]
Acked-by: Dmitry Vyukov <[email protected]>
Signed-off-by: Marcelo Ricardo Leitner <[email protected]>
Acked-by: Neil Horman <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/sctp/socket.c | 5 ++---
1 file changed, 2 insertions(+), 3 deletions(-)
--- a/net/sctp/socket.c
+++ b/net/sctp/socket.c
@@ -248,11 +248,10 @@ struct sctp_association *sctp_id2assoc(s
spin_lock_bh(&sctp_assocs_id_lock);
asoc = (struct sctp_association *)idr_find(&sctp_assocs_id, (int)id);
+ if (asoc && (asoc->base.sk != sk || asoc->base.dead))
+ asoc = NULL;
spin_unlock_bh(&sctp_assocs_id_lock);
- if (!asoc || (asoc->base.sk != sk) || asoc->base.dead)
- return NULL;
-
return asoc;
}
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 2a83fba6cae89dd9c0625e68ff8ffff791c67ac0 ]
This patch reverts two previous applied patches to fix an issue
that appeared when using SGMII based SFP modules. In the current
state the driver will try to reset the PHY before obtaining the
phy_addr of the SGMII attached PHY. That leads to an error in
e1000_write_phy_reg_sgmii_82575. Causing the initialization to
fail:
igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k
igb: Copyright (c) 2007-2014 Intel Corporation.
igb: probe of ????:??:??.? failed with error -3
The patches being reverted are:
commit 182785335447957409282ca745aa5bc3968facee
Author: Aaron Sierra <[email protected]>
Date: Tue Nov 29 10:03:56 2016 -0600
igb: reset the PHY before reading the PHY ID
commit 440aeca4b9858248d8f16d724d9fa87a4f65fa33
Author: Matwey V Kornilov <[email protected]>
Date: Thu Nov 24 13:32:48 2016 +0300
igb: Explicitly select page 0 at initialization
The first reverted patch directly causes the problem mentioned above.
In case of SGMII the phy_addr is not known at this point and will
only be obtained by 'igb_get_phy_id_82575' further down in the code.
The second removed patch selects forces selection of page 0 in the
PHY. Something that the reset tries to address as well.
As pointed out by Alexander Duzck, the patch below fixes the same
issue but in the proper location:
commit 4e684f59d760a2c7c716bb60190783546e2d08a1
Author: Chris J Arges <[email protected]>
Date: Wed Nov 2 09:13:42 2016 -0500
igb: Workaround for igb i210 firmware issue
Reverts: 440aeca4b9858248d8f16d724d9fa87a4f65fa33.
Reverts: 182785335447957409282ca745aa5bc3968facee.
Signed-off-by: Christian Grönke <[email protected]>
Reviewed-by: Alexander Duyck <[email protected]>
Tested-by: Aaron Brown <[email protected]>
Signed-off-by: Jeff Kirsher <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/intel/igb/e1000_82575.c | 11 -----------
1 file changed, 11 deletions(-)
diff --git a/drivers/net/ethernet/intel/igb/e1000_82575.c b/drivers/net/ethernet/intel/igb/e1000_82575.c
index f3f3b95d5512..97bf0c3d5c69 100644
--- a/drivers/net/ethernet/intel/igb/e1000_82575.c
+++ b/drivers/net/ethernet/intel/igb/e1000_82575.c
@@ -223,17 +223,6 @@ static s32 igb_init_phy_params_82575(struct e1000_hw *hw)
hw->bus.func = (rd32(E1000_STATUS) & E1000_STATUS_FUNC_MASK) >>
E1000_STATUS_FUNC_SHIFT;
- /* Make sure the PHY is in a good state. Several people have reported
- * firmware leaving the PHY's page select register set to something
- * other than the default of zero, which causes the PHY ID read to
- * access something other than the intended register.
- */
- ret_val = hw->phy.ops.reset(hw);
- if (ret_val) {
- hw_dbg("Error resetting the PHY.\n");
- goto out;
- }
-
/* Set phy->phy_addr and phy->id. */
ret_val = igb_get_phy_id_82575(hw);
if (ret_val)
--
2.17.1
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Wenwen Wang <[email protected]>
[ Upstream commit b6168562c8ce2bd5a30e213021650422e08764dc ]
In ethtool_ioctl(), the ioctl command 'ethcmd' is checked through a switch
statement to see whether it is necessary to pre-process the ethtool
structure, because, as mentioned in the comment, the structure
ethtool_rxnfc is defined with padding. If yes, a user-space buffer 'rxnfc'
is allocated through compat_alloc_user_space(). One thing to note here is
that, if 'ethcmd' is ETHTOOL_GRXCLSRLALL, the size of the buffer 'rxnfc' is
partially determined by 'rule_cnt', which is actually acquired from the
user-space buffer 'compat_rxnfc', i.e., 'compat_rxnfc->rule_cnt', through
get_user(). After 'rxnfc' is allocated, the data in the original user-space
buffer 'compat_rxnfc' is then copied to 'rxnfc' through copy_in_user(),
including the 'rule_cnt' field. However, after this copy, no check is
re-enforced on 'rxnfc->rule_cnt'. So it is possible that a malicious user
race to change the value in the 'compat_rxnfc->rule_cnt' between these two
copies. Through this way, the attacker can bypass the previous check on
'rule_cnt' and inject malicious data. This can cause undefined behavior of
the kernel and introduce potential security risk.
This patch avoids the above issue via copying the value acquired by
get_user() to 'rxnfc->rule_cn', if 'ethcmd' is ETHTOOL_GRXCLSRLALL.
Signed-off-by: Wenwen Wang <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/socket.c | 11 ++++++++---
1 file changed, 8 insertions(+), 3 deletions(-)
--- a/net/socket.c
+++ b/net/socket.c
@@ -2760,9 +2760,14 @@ static int ethtool_ioctl(struct net *net
copy_in_user(&rxnfc->fs.ring_cookie,
&compat_rxnfc->fs.ring_cookie,
(void __user *)(&rxnfc->fs.location + 1) -
- (void __user *)&rxnfc->fs.ring_cookie) ||
- copy_in_user(&rxnfc->rule_cnt, &compat_rxnfc->rule_cnt,
- sizeof(rxnfc->rule_cnt)))
+ (void __user *)&rxnfc->fs.ring_cookie))
+ return -EFAULT;
+ if (ethcmd == ETHTOOL_GRXCLSRLALL) {
+ if (put_user(rule_cnt, &rxnfc->rule_cnt))
+ return -EFAULT;
+ } else if (copy_in_user(&rxnfc->rule_cnt,
+ &compat_rxnfc->rule_cnt,
+ sizeof(rxnfc->rule_cnt)))
return -EFAULT;
}
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: David Ahern <[email protected]>
[ Upstream commit 4ba4c566ba8448a05e6257e0b98a21f1a0d55315 ]
The loop wants to skip previously dumped addresses, so loops until
current index >= saved index. If the message fills it wants to save
the index for the next address to dump - ie., the one that did not
fit in the current message.
Currently, it is incrementing the index counter before comparing to the
saved index, and then the saved index is off by 1 - it assumes the
current address is going to fit in the message.
Change the index handling to increment only after a succesful dump.
Fixes: 502a2ffd7376a ("ipv6: convert idev_list to list macros")
Signed-off-by: David Ahern <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/ipv6/addrconf.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
--- a/net/ipv6/addrconf.c
+++ b/net/ipv6/addrconf.c
@@ -4439,8 +4439,8 @@ static int in6_dump_addrs(struct inet6_d
/* unicast address incl. temp addr */
list_for_each_entry(ifa, &idev->addr_list, if_list) {
- if (++ip_idx < s_ip_idx)
- continue;
+ if (ip_idx < s_ip_idx)
+ goto next;
err = inet6_fill_ifaddr(skb, ifa,
NETLINK_CB(cb->skb).portid,
cb->nlh->nlmsg_seq,
@@ -4449,6 +4449,8 @@ static int in6_dump_addrs(struct inet6_d
if (err < 0)
break;
nl_dump_check_consistent(cb, nlmsg_hdr(skb));
+next:
+ ip_idx++;
}
break;
}
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 0ae99ecba7928c7bc66cf14d8a88f0b6ec9fc78e ]
platform_get_irq() returns an error code, but the dwc3-omap driver
ignores it and always returns -EINVAL. This is not correct and,
prevents -EPROBE_DEFER from being propagated properly.
Notice that platform_get_irq() no longer returns 0 on error:
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=e330b9a6bb35dc7097a4f02cb1ae7b6f96df92af
Print and propagate the return value of platform_get_irq on failure.
This issue was detected with the help of Coccinelle.
Signed-off-by: Gustavo A. R. Silva <[email protected]>
Signed-off-by: Felipe Balbi <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/usb/dwc3/dwc3-omap.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/usb/dwc3/dwc3-omap.c b/drivers/usb/dwc3/dwc3-omap.c
index 22e9606d8e08..9078af0ce06c 100644
--- a/drivers/usb/dwc3/dwc3-omap.c
+++ b/drivers/usb/dwc3/dwc3-omap.c
@@ -469,8 +469,8 @@ static int dwc3_omap_probe(struct platform_device *pdev)
irq = platform_get_irq(pdev, 0);
if (irq < 0) {
- dev_err(dev, "missing IRQ resource\n");
- return -EINVAL;
+ dev_err(dev, "missing IRQ resource: %d\n", irq);
+ return irq;
}
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
--
2.17.1
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 5a1aca4469fdccd5b74ba0b4e490173b2b447895 ]
Sanitize FCSR Cause bit handling, following a trail of past attempts:
* commit 4249548454f7 ("MIPS: ptrace: Fix FP context restoration FCSR
regression"),
* commit 443c44032a54 ("MIPS: Always clear FCSR cause bits after
emulation"),
* commit 64bedffe4968 ("MIPS: Clear [MSA]FPE CSR.Cause after
notify_die()"),
* commit b1442d39fac2 ("MIPS: Prevent user from setting FCSR cause
bits"),
* commit b54d2901517d ("Properly handle branch delay slots in connection
with signals.").
Specifically do not mask these bits out in ptrace(2) processing and send
a SIGFPE signal instead whenever a matching pair of an FCSR Cause and
Enable bit is seen as execution of an affected context is about to
resume. Only then clear Cause bits, and even then do not clear any bits
that are set but masked with the respective Enable bits. Adjust Cause
bit clearing throughout code likewise, except within the FPU emulator
proper where they are set according to IEEE 754 exceptions raised as the
operation emulated executed. Do so so that any IEEE 754 exceptions
subject to their default handling are recorded like with operations
executed by FPU hardware.
Signed-off-by: Maciej W. Rozycki <[email protected]>
Cc: Paul Burton <[email protected]>
Cc: James Hogan <[email protected]>
Cc: [email protected]
Cc: [email protected]
Patchwork: https://patchwork.linux-mips.org/patch/14460/
Signed-off-by: Ralf Baechle <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/mips/include/asm/fpu_emulator.h | 13 +++++
arch/mips/include/asm/switch_to.h | 18 +++++++
arch/mips/kernel/mips-r2-to-r6-emul.c | 10 ++--
arch/mips/kernel/ptrace.c | 7 ++-
arch/mips/kernel/traps.c | 72 +++++++++++++++------------
5 files changed, 78 insertions(+), 42 deletions(-)
diff --git a/arch/mips/include/asm/fpu_emulator.h b/arch/mips/include/asm/fpu_emulator.h
index 2f021cdfba4f..742223716fc8 100644
--- a/arch/mips/include/asm/fpu_emulator.h
+++ b/arch/mips/include/asm/fpu_emulator.h
@@ -66,6 +66,8 @@ extern int do_dsemulret(struct pt_regs *xcp);
extern int fpu_emulator_cop1Handler(struct pt_regs *xcp,
struct mips_fpu_struct *ctx, int has_fpu,
void *__user *fault_addr);
+void force_fcr31_sig(unsigned long fcr31, void __user *fault_addr,
+ struct task_struct *tsk);
int process_fpemu_return(int sig, void __user *fault_addr,
unsigned long fcr31);
int mm_isBranchInstr(struct pt_regs *regs, struct mm_decoded_insn dec_insn,
@@ -92,4 +94,15 @@ static inline void fpu_emulator_init_fpu(void)
set_fpr64(&t->thread.fpu.fpr[i], 0, SIGNALLING_NAN);
}
+/*
+ * Mask the FCSR Cause bits according to the Enable bits, observing
+ * that Unimplemented is always enabled.
+ */
+static inline unsigned long mask_fcr31_x(unsigned long fcr31)
+{
+ return fcr31 & (FPU_CSR_UNI_X |
+ ((fcr31 & FPU_CSR_ALL_E) <<
+ (ffs(FPU_CSR_ALL_X) - ffs(FPU_CSR_ALL_E))));
+}
+
#endif /* _ASM_FPU_EMULATOR_H */
diff --git a/arch/mips/include/asm/switch_to.h b/arch/mips/include/asm/switch_to.h
index ebb5c0f2f90d..c0ae27971e31 100644
--- a/arch/mips/include/asm/switch_to.h
+++ b/arch/mips/include/asm/switch_to.h
@@ -75,6 +75,22 @@ do { if (cpu_has_rw_llb) { \
} \
} while (0)
+/*
+ * Check FCSR for any unmasked exceptions pending set with `ptrace',
+ * clear them and send a signal.
+ */
+#define __sanitize_fcr31(next) \
+do { \
+ unsigned long fcr31 = mask_fcr31_x(next->thread.fpu.fcr31); \
+ void __user *pc; \
+ \
+ if (unlikely(fcr31)) { \
+ pc = (void __user *)task_pt_regs(next)->cp0_epc; \
+ next->thread.fpu.fcr31 &= ~fcr31; \
+ force_fcr31_sig(fcr31, pc, next); \
+ } \
+} while (0)
+
/*
* For newly created kernel threads switch_to() will return to
* ret_from_kernel_thread, newly created user threads to ret_from_fork.
@@ -85,6 +101,8 @@ do { if (cpu_has_rw_llb) { \
do { \
__mips_mt_fpaff_switch_to(prev); \
lose_fpu_inatomic(1, prev); \
+ if (tsk_used_math(next)) \
+ __sanitize_fcr31(next); \
if (cpu_has_dsp) { \
__save_dsp(prev); \
__restore_dsp(next); \
diff --git a/arch/mips/kernel/mips-r2-to-r6-emul.c b/arch/mips/kernel/mips-r2-to-r6-emul.c
index cbe0f025856d..7b887027dca2 100644
--- a/arch/mips/kernel/mips-r2-to-r6-emul.c
+++ b/arch/mips/kernel/mips-r2-to-r6-emul.c
@@ -900,7 +900,7 @@ static inline int mipsr2_find_op_func(struct pt_regs *regs, u32 inst,
* mipsr2_decoder: Decode and emulate a MIPS R2 instruction
* @regs: Process register set
* @inst: Instruction to decode and emulate
- * @fcr31: Floating Point Control and Status Register returned
+ * @fcr31: Floating Point Control and Status Register Cause bits returned
*/
int mipsr2_decoder(struct pt_regs *regs, u32 inst, unsigned long *fcr31)
{
@@ -1183,13 +1183,13 @@ fpu_emul:
err = fpu_emulator_cop1Handler(regs, ¤t->thread.fpu, 0,
&fault_addr);
- *fcr31 = current->thread.fpu.fcr31;
/*
- * We can't allow the emulated instruction to leave any of
- * the cause bits set in $fcr31.
+ * We can't allow the emulated instruction to leave any
+ * enabled Cause bits set in $fcr31.
*/
- current->thread.fpu.fcr31 &= ~FPU_CSR_ALL_X;
+ *fcr31 = res = mask_fcr31_x(current->thread.fpu.fcr31);
+ current->thread.fpu.fcr31 &= ~res;
/*
* this is a tricky issue - lose_fpu() uses LL/SC atomics
diff --git a/arch/mips/kernel/ptrace.c b/arch/mips/kernel/ptrace.c
index 5a869515b393..9d04392f7ef0 100644
--- a/arch/mips/kernel/ptrace.c
+++ b/arch/mips/kernel/ptrace.c
@@ -79,16 +79,15 @@ void ptrace_disable(struct task_struct *child)
}
/*
- * Poke at FCSR according to its mask. Don't set the cause bits as
- * this is currently not handled correctly in FP context restoration
- * and will cause an oops if a corresponding enable bit is set.
+ * Poke at FCSR according to its mask. Set the Cause bits even
+ * if a corresponding Enable bit is set. This will be noticed at
+ * the time the thread is switched to and SIGFPE thrown accordingly.
*/
static void ptrace_setfcr31(struct task_struct *child, u32 value)
{
u32 fcr31;
u32 mask;
- value &= ~FPU_CSR_ALL_X;
fcr31 = child->thread.fpu.fcr31;
mask = boot_cpu_data.fpu_msk31;
child->thread.fpu.fcr31 = (value & ~mask) | (fcr31 & mask);
diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c
index 1b901218e3ae..6abd6b41c13d 100644
--- a/arch/mips/kernel/traps.c
+++ b/arch/mips/kernel/traps.c
@@ -706,6 +706,32 @@ asmlinkage void do_ov(struct pt_regs *regs)
exception_exit(prev_state);
}
+/*
+ * Send SIGFPE according to FCSR Cause bits, which must have already
+ * been masked against Enable bits. This is impotant as Inexact can
+ * happen together with Overflow or Underflow, and `ptrace' can set
+ * any bits.
+ */
+void force_fcr31_sig(unsigned long fcr31, void __user *fault_addr,
+ struct task_struct *tsk)
+{
+ struct siginfo si = { .si_addr = fault_addr, .si_signo = SIGFPE };
+
+ if (fcr31 & FPU_CSR_INV_X)
+ si.si_code = FPE_FLTINV;
+ else if (fcr31 & FPU_CSR_DIV_X)
+ si.si_code = FPE_FLTDIV;
+ else if (fcr31 & FPU_CSR_OVF_X)
+ si.si_code = FPE_FLTOVF;
+ else if (fcr31 & FPU_CSR_UDF_X)
+ si.si_code = FPE_FLTUND;
+ else if (fcr31 & FPU_CSR_INE_X)
+ si.si_code = FPE_FLTRES;
+ else
+ si.si_code = __SI_FAULT;
+ force_sig_info(SIGFPE, &si, tsk);
+}
+
int process_fpemu_return(int sig, void __user *fault_addr, unsigned long fcr31)
{
struct siginfo si = { 0 };
@@ -715,27 +741,7 @@ int process_fpemu_return(int sig, void __user *fault_addr, unsigned long fcr31)
return 0;
case SIGFPE:
- si.si_addr = fault_addr;
- si.si_signo = sig;
- /*
- * Inexact can happen together with Overflow or Underflow.
- * Respect the mask to deliver the correct exception.
- */
- fcr31 &= (fcr31 & FPU_CSR_ALL_E) <<
- (ffs(FPU_CSR_ALL_X) - ffs(FPU_CSR_ALL_E));
- if (fcr31 & FPU_CSR_INV_X)
- si.si_code = FPE_FLTINV;
- else if (fcr31 & FPU_CSR_DIV_X)
- si.si_code = FPE_FLTDIV;
- else if (fcr31 & FPU_CSR_OVF_X)
- si.si_code = FPE_FLTOVF;
- else if (fcr31 & FPU_CSR_UDF_X)
- si.si_code = FPE_FLTUND;
- else if (fcr31 & FPU_CSR_INE_X)
- si.si_code = FPE_FLTRES;
- else
- si.si_code = __SI_FAULT;
- force_sig_info(sig, &si, current);
+ force_fcr31_sig(fcr31, fault_addr, current);
return 1;
case SIGBUS:
@@ -798,13 +804,13 @@ static int simulate_fp(struct pt_regs *regs, unsigned int opcode,
/* Run the emulator */
sig = fpu_emulator_cop1Handler(regs, ¤t->thread.fpu, 1,
&fault_addr);
- fcr31 = current->thread.fpu.fcr31;
/*
- * We can't allow the emulated instruction to leave any of
- * the cause bits set in $fcr31.
+ * We can't allow the emulated instruction to leave any
+ * enabled Cause bits set in $fcr31.
*/
- current->thread.fpu.fcr31 &= ~FPU_CSR_ALL_X;
+ fcr31 = mask_fcr31_x(current->thread.fpu.fcr31);
+ current->thread.fpu.fcr31 &= ~fcr31;
/* Restore the hardware register state */
own_fpu(1);
@@ -830,7 +836,7 @@ asmlinkage void do_fpe(struct pt_regs *regs, unsigned long fcr31)
goto out;
/* Clear FCSR.Cause before enabling interrupts */
- write_32bit_cp1_register(CP1_STATUS, fcr31 & ~FPU_CSR_ALL_X);
+ write_32bit_cp1_register(CP1_STATUS, fcr31 & ~mask_fcr31_x(fcr31));
local_irq_enable();
die_if_kernel("FP exception in kernel code", regs);
@@ -852,13 +858,13 @@ asmlinkage void do_fpe(struct pt_regs *regs, unsigned long fcr31)
/* Run the emulator */
sig = fpu_emulator_cop1Handler(regs, ¤t->thread.fpu, 1,
&fault_addr);
- fcr31 = current->thread.fpu.fcr31;
/*
- * We can't allow the emulated instruction to leave any of
- * the cause bits set in $fcr31.
+ * We can't allow the emulated instruction to leave any
+ * enabled Cause bits set in $fcr31.
*/
- current->thread.fpu.fcr31 &= ~FPU_CSR_ALL_X;
+ fcr31 = mask_fcr31_x(current->thread.fpu.fcr31);
+ current->thread.fpu.fcr31 &= ~fcr31;
/* Restore the hardware register state */
own_fpu(1); /* Using the FPU again. */
@@ -1431,13 +1437,13 @@ asmlinkage void do_cpu(struct pt_regs *regs)
sig = fpu_emulator_cop1Handler(regs, ¤t->thread.fpu, 0,
&fault_addr);
- fcr31 = current->thread.fpu.fcr31;
/*
* We can't allow the emulated instruction to leave
- * any of the cause bits set in $fcr31.
+ * any enabled Cause bits set in $fcr31.
*/
- current->thread.fpu.fcr31 &= ~FPU_CSR_ALL_X;
+ fcr31 = mask_fcr31_x(current->thread.fpu.fcr31);
+ current->thread.fpu.fcr31 &= ~fcr31;
/* Send a signal if required. */
if (!process_fpemu_return(sig, fault_addr, fcr31) && !err)
--
2.17.1
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Stefano Brivio <[email protected]>
[ Upstream commit ee1abcf689353f36d9322231b4320926096bdee0 ]
Commit a61bbcf28a8c ("[NET]: Store skb->timestamp as offset to a base
timestamp") introduces a neighbour control buffer and zeroes it out in
ndisc_rcv(), as ndisc_recv_ns() uses it.
Commit f2776ff04722 ("[IPV6]: Fix address/interface handling in UDP and
DCCP, according to the scoping architecture.") introduces the usage of the
IPv6 control buffer in protocol error handlers (e.g. inet6_iif() in
present-day __udp6_lib_err()).
Now, with commit b94f1c0904da ("ipv6: Use icmpv6_notify() to propagate
redirect, instead of rt6_redirect()."), we call protocol error handlers
from ndisc_redirect_rcv(), after the control buffer is already stolen and
some parts are already zeroed out. This implies that inet6_iif() on this
path will always return zero.
This gives unexpected results on UDP socket lookup in __udp6_lib_err(), as
we might actually need to match sockets for a given interface.
Instead of always claiming the control buffer in ndisc_rcv(), do that only
when needed.
Fixes: b94f1c0904da ("ipv6: Use icmpv6_notify() to propagate redirect, instead of rt6_redirect().")
Signed-off-by: Stefano Brivio <[email protected]>
Reviewed-by: Sabrina Dubroca <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/ipv6/ndisc.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
--- a/net/ipv6/ndisc.c
+++ b/net/ipv6/ndisc.c
@@ -1649,10 +1649,9 @@ int ndisc_rcv(struct sk_buff *skb)
return 0;
}
- memset(NEIGH_CB(skb), 0, sizeof(struct neighbour_cb));
-
switch (msg->icmph.icmp6_type) {
case NDISC_NEIGHBOUR_SOLICITATION:
+ memset(NEIGH_CB(skb), 0, sizeof(struct neighbour_cb));
ndisc_recv_ns(skb);
break;
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 40920c2bb119fd49ba03e2f97a172171781be442 ]
Commit 1a967d6c9b39c226be1b45f13acd4d8a5ab3dc44 ("correctly to
anonymous authentication for the NTLM(v2) authentication") introduces
a regression in handling errors related to attempting a guest
connection to a Windows share which requires authentication. This
should result in a permission denied error but actually causes the
kernel module to enter a never-ending loop trying to follow a DFS
referal which doesn't exist.
The base cause of this is the failure now occurs later in the process
during tree connect and not at the session setup setup and all errors
in tree connect are interpreted as needing to follow the DFS paths
which isn't in this case correct. So, check the returned error against
EACCES and fail if this is returned error.
Feedback from Aurelien:
PS> net user guest /activate:no
PS> mkdir C:\guestshare
PS> icacls C:\guestshare /grant 'Everyone:(OI)(CI)F'
PS> new-smbshare -name guestshare -path C:\guestshare -fullaccess Everyone
I've tested v3.10, v4.4, master, master+your patch using default options
(empty or no user "NU") and user=abc (U).
NT_LOGON_FAILURE in session setup: LF
This is what you seem to have in 3.10.
NT_ACCESS_DENIED in tree connect to the share: AD
This is what you get before your infinite loop.
| NU U
--------------------------------
3.10 | LF LF
4.4 | LF LF
master | AD LF
master+patch | AD LF
No infinite DFS loop :(
All these issues result in mount failing very fast with permission denied.
I guess it could be from either the Windows version or the share/folder
ACL. A deeper analysis of the packets might reveal more.
In any case I did not notice any issues for on a basic DFS setup with
the patch so I don't think it introduced any regressions, which is
probably all that matters. It still bothers me a little I couldn't hit
the bug.
I've included kernel output w/ debugging output and network capture of
my tests if anyone want to have a look at it. (master+patch = ml-guestfix).
Signed-off-by: Mark Syms <[email protected]>
Reviewed-by: Aurelien Aptel <[email protected]>
Tested-by: Aurelien Aptel <[email protected]>
Acked-by: Pavel Shilovsky <[email protected]>
Signed-off-by: Steve French <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/cifs/connect.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c
index 077ad3a06c9a..1eeb4780c3ed 100644
--- a/fs/cifs/connect.c
+++ b/fs/cifs/connect.c
@@ -3674,6 +3674,9 @@ try_mount_again:
if (IS_ERR(tcon)) {
rc = PTR_ERR(tcon);
tcon = NULL;
+ if (rc == -EACCES)
+ goto mount_fail_check;
+
goto remote_path_check;
}
--
2.17.1
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Nikolay Aleksandrov <[email protected]>
commit 0fe5119e267f3e3d8ac206895f5922195ec55a8a upstream.
Recently a check was added which prevents marking of routers with zero
source address, but for IPv6 that cannot happen as the relevant RFCs
actually forbid such packets:
RFC 2710 (MLDv1):
"To be valid, the Query message MUST
come from a link-local IPv6 Source Address, be at least 24 octets
long, and have a correct MLD checksum."
Same goes for RFC 3810.
And also it can be seen as a requirement in ipv6_mc_check_mld_query()
which is used by the bridge to validate the message before processing
it. Thus any queries with :: source address won't be processed anyway.
So just remove the check for zero IPv6 source address from the query
processing function.
Fixes: 5a2de63fd1a5 ("bridge: do not add port to router list when receives query with source 0.0.0.0")
Signed-off-by: Nikolay Aleksandrov <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Cc: Hangbin Liu <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/bridge/br_multicast.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
--- a/net/bridge/br_multicast.c
+++ b/net/bridge/br_multicast.c
@@ -1267,8 +1267,7 @@ static void br_multicast_query_received(
* is 0.0.0.0 should not be added to router port list.
*/
if ((saddr->proto == htons(ETH_P_IP) && saddr->u.ip4) ||
- (saddr->proto == htons(ETH_P_IPV6) &&
- !ipv6_addr_any(&saddr->u.ip6)))
+ saddr->proto == htons(ETH_P_IPV6))
br_multicast_mark_router(br, port);
}
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 50c7a0ef2d97e56c7ce2f1ea5fe1d8e25aadc1bb ]
The wm8940 driver is using a regmap cache sync to restore the
configuration of the chip when switching from OFF to STANDBY, but does
not actually define a register cache which means that the restore is
never going to work and we trigger asserts in regmap. Fix this by
enabling caching.
Based on commit d3030d11961a8c10 ("ASoC: ak4642: Enable cache usage to
fix crashes on resume") by Mark Brown <[email protected]>.
Signed-off-by: Geert Uytterhoeven <[email protected]>
Acked-by: Charles Keepax <[email protected]>
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/soc/codecs/wm8940.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/sound/soc/codecs/wm8940.c b/sound/soc/codecs/wm8940.c
index f6f9395ea38e..1c600819f768 100644
--- a/sound/soc/codecs/wm8940.c
+++ b/sound/soc/codecs/wm8940.c
@@ -743,6 +743,7 @@ static const struct regmap_config wm8940_regmap = {
.max_register = WM8940_MONOMIX,
.reg_defaults = wm8940_reg_defaults,
.num_reg_defaults = ARRAY_SIZE(wm8940_reg_defaults),
+ .cache_type = REGCACHE_RBTREE,
.readable_reg = wm8940_readable_register,
.volatile_reg = wm8940_volatile_register,
--
2.17.1
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit da15fc2fa9c07b23db8f5e479bd8a9f0d741ca07 ]
The Yocto build system does a 'make clean' when rebuilding due to
changed dependencies, and that consistently fails for me (causing the
whole BSP build to fail) with errors such as
| find: '[...]/perf/1.0-r9/perf-1.0/plugin_mac80211.so': No such file or directory
| find: '[...]/perf/1.0-r9/perf-1.0/plugin_mac80211.so': No such file or directory
| find: find: '[...]/perf/1.0-r9/perf-1.0/libtraceevent.a''[...]/perf/1.0-r9/perf-1.0/libtraceevent.a': No such file or directory: No such file or directory
|
[...]
| find: cannot delete '/mnt/xfs/devel/pil/yocto/tmp-glibc/work/wandboard-oe-linux-gnueabi/perf/1.0-r9/perf-1.0/util/.pstack.o.cmd': No such file or directory
Apparently (despite the comment), 'make clean' ends up launching
multiple sub-makes that all want to remove the same things - perhaps
this only happens in combination with a O=... parameter. In any case, we
don't lose much by explicitly disabling the parallelism for the clean
target, and it makes automated builds much more reliable.
Signed-off-by: Rasmus Villemoes <[email protected]>
Acked-by: Jiri Olsa <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
tools/perf/Makefile | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/tools/perf/Makefile
+++ b/tools/perf/Makefile
@@ -69,10 +69,10 @@ all tags TAGS:
$(make)
#
-# The clean target is not really parallel, don't print the jobs info:
+# Explicitly disable parallelism for the clean target.
#
clean:
- $(make)
+ $(make) -j1
#
# The build-test target is not really parallel, don't print the jobs info:
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 6d332747fa5f0a6843b56b5b129168ba909336d1 ]
In a system with DBM (dirty bit management) capable agents there is a
possible race between a CPU executing ptep_set_access_flags() (maybe
non-DBM capable) and a hardware update of the dirty state (clearing of
PTE_RDONLY). The scenario:
a) the pte is writable (PTE_WRITE set), clean (PTE_RDONLY set) and old
(PTE_AF clear)
b) ptep_set_access_flags() is called as a result of a read access and it
needs to set the pte to writable, clean and young (PTE_AF set)
c) a DBM-capable agent, as a result of a different write access, is
marking the entry as young (setting PTE_AF) and dirty (clearing
PTE_RDONLY)
The current ptep_set_access_flags() implementation would set the
PTE_RDONLY bit in the resulting value overriding the DBM update and
losing the dirty state.
This patch fixes such race by setting PTE_RDONLY to the most permissive
(lowest value) of the current entry and the new one.
Fixes: 66dbd6e61a52 ("arm64: Implement ptep_set_access_flags() for hardware AF/DBM")
Cc: Will Deacon <[email protected]>
Acked-by: Mark Rutland <[email protected]>
Acked-by: Steve Capper <[email protected]>
Signed-off-by: Catalin Marinas <[email protected]>
Signed-off-by: Will Deacon <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm64/mm/fault.c | 15 ++++++++-------
1 file changed, 8 insertions(+), 7 deletions(-)
diff --git a/arch/arm64/mm/fault.c b/arch/arm64/mm/fault.c
index 86485415c5f0..be7f8416809f 100644
--- a/arch/arm64/mm/fault.c
+++ b/arch/arm64/mm/fault.c
@@ -107,26 +107,27 @@ int ptep_set_access_flags(struct vm_area_struct *vma,
/* only preserve the access flags and write permission */
pte_val(entry) &= PTE_AF | PTE_WRITE | PTE_DIRTY;
- /*
- * PTE_RDONLY is cleared by default in the asm below, so set it in
- * back if necessary (read-only or clean PTE).
- */
+ /* set PTE_RDONLY if actual read-only or clean PTE */
if (!pte_write(entry) || !pte_sw_dirty(entry))
pte_val(entry) |= PTE_RDONLY;
/*
* Setting the flags must be done atomically to avoid racing with the
- * hardware update of the access/dirty state.
+ * hardware update of the access/dirty state. The PTE_RDONLY bit must
+ * be set to the most permissive (lowest value) of *ptep and entry
+ * (calculated as: a & b == ~(~a | ~b)).
*/
+ pte_val(entry) ^= PTE_RDONLY;
asm volatile("// ptep_set_access_flags\n"
" prfm pstl1strm, %2\n"
"1: ldxr %0, %2\n"
- " and %0, %0, %3 // clear PTE_RDONLY\n"
+ " eor %0, %0, %3 // negate PTE_RDONLY in *ptep\n"
" orr %0, %0, %4 // set flags\n"
+ " eor %0, %0, %3 // negate final PTE_RDONLY\n"
" stxr %w1, %0, %2\n"
" cbnz %w1, 1b\n"
: "=&r" (old_pteval), "=&r" (tmp), "+Q" (pte_val(*ptep))
- : "L" (~PTE_RDONLY), "r" (pte_val(entry)));
+ : "L" (PTE_RDONLY), "r" (pte_val(entry)));
flush_tlb_fix_spurious_fault(vma, address);
return 1;
--
2.17.1
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 0ede1c401332173ab0693121dc6cde04a4dbf131 ]
Mikael Pettersson reported that some test programs in the strace-4.18
testsuite cause an OOPS.
After some debugging it turns out that garbage values are returned
when an exception occurs, causing the fixup memset() to be run with
bogus arguments.
The problem is that two of the exception handler stubs write the
successfully copied length into the wrong register.
Fixes: ee841d0aff64 ("sparc64: Convert U3copy_{from,to}_user to accurate exception reporting.")
Reported-by: Mikael Pettersson <[email protected]>
Tested-by: Mikael Pettersson <[email protected]>
Reviewed-by: Sam Ravnborg <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/sparc/lib/U3memcpy.S | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/sparc/lib/U3memcpy.S b/arch/sparc/lib/U3memcpy.S
index 54f98706b03b..5a8cb37f0a3b 100644
--- a/arch/sparc/lib/U3memcpy.S
+++ b/arch/sparc/lib/U3memcpy.S
@@ -145,13 +145,13 @@ ENDPROC(U3_retl_o2_plus_GS_plus_0x08)
ENTRY(U3_retl_o2_and_7_plus_GS)
and %o2, 7, %o2
retl
- add %o2, GLOBAL_SPARE, %o2
+ add %o2, GLOBAL_SPARE, %o0
ENDPROC(U3_retl_o2_and_7_plus_GS)
ENTRY(U3_retl_o2_and_7_plus_GS_plus_8)
add GLOBAL_SPARE, 8, GLOBAL_SPARE
and %o2, 7, %o2
retl
- add %o2, GLOBAL_SPARE, %o2
+ add %o2, GLOBAL_SPARE, %o0
ENDPROC(U3_retl_o2_and_7_plus_GS_plus_8)
#endif
--
2.17.1
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit eea96566c189c77e5272585984eb2729881a2f1d ]
The maximum CPU frequency for the i.MX53 QSB is 1GHz, so disable the
1.2GHz OPP. This makes the board work again with configs that have
cpufreq enabled like imx_v6_v7_defconfig on which the board stopped
working with the addition of cpufreq-dt support.
Fixes: 791f416608 ("ARM: dts: imx53: add cpufreq-dt support")
Signed-off-by: Sascha Hauer <[email protected]>
Signed-off-by: Shawn Guo <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm/boot/dts/imx53-qsb-common.dtsi | 11 +++++++++++
1 file changed, 11 insertions(+)
diff --git a/arch/arm/boot/dts/imx53-qsb-common.dtsi b/arch/arm/boot/dts/imx53-qsb-common.dtsi
index 53fd75c8ffcf..47894b41e4e2 100644
--- a/arch/arm/boot/dts/imx53-qsb-common.dtsi
+++ b/arch/arm/boot/dts/imx53-qsb-common.dtsi
@@ -130,6 +130,17 @@
};
};
+&cpu0 {
+ /* CPU rated to 1GHz, not 1.2GHz as per the default settings */
+ operating-points = <
+ /* kHz uV */
+ 166666 850000
+ 400000 900000
+ 800000 1050000
+ 1000000 1200000
+ >;
+};
+
&esdhc1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_esdhc1>;
--
2.17.1
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit ec085c5a51b768947ca481f90b66653e36b3c566 ]
platform_get_irq() returns an error code, but the sprd_serial driver
ignores it and always returns -ENODEV. This is not correct and,
prevents -EPROBE_DEFER from being propagated properly.
Also, notice that platform_get_irq() no longer returns 0 on error:
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=e330b9a6bb35dc7097a4f02cb1ae7b6f96df92af
Print and propagate the return value of platform_get_irq on failure.
This issue was detected with the help of Coccinelle.
Signed-off-by: Gustavo A. R. Silva <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/tty/serial/sprd_serial.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/tty/serial/sprd_serial.c b/drivers/tty/serial/sprd_serial.c
index 9dbae01d41ce..1e302caaa450 100644
--- a/drivers/tty/serial/sprd_serial.c
+++ b/drivers/tty/serial/sprd_serial.c
@@ -731,8 +731,8 @@ static int sprd_probe(struct platform_device *pdev)
irq = platform_get_irq(pdev, 0);
if (irq < 0) {
- dev_err(&pdev->dev, "not provide irq resource\n");
- return -ENODEV;
+ dev_err(&pdev->dev, "not provide irq resource: %d\n", irq);
+ return irq;
}
up->irq = irq;
--
2.17.1
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit d616f81cdd2a21edfa90a595a4e9b143f5ba8414 ]
Added support for is25wp032, is25wp064 and is25wp128.
Signed-off-by: Kimmo Rautkoski <[email protected]>
Reviewed-by: Marek Vasut <[email protected]>
Signed-off-by: Boris Brezillon <[email protected]>
[ Adrian Bunk: Trivial adaption to changed context. ]
Signed-off-by: Adrian Bunk <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/mtd/spi-nor/spi-nor.c | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/drivers/mtd/spi-nor/spi-nor.c b/drivers/mtd/spi-nor/spi-nor.c
index 64d6f053c2a5..276998ea0267 100644
--- a/drivers/mtd/spi-nor/spi-nor.c
+++ b/drivers/mtd/spi-nor/spi-nor.c
@@ -708,6 +708,12 @@ static const struct flash_info spi_nor_ids[] = {
/* ISSI */
{ "is25cd512", INFO(0x7f9d20, 0, 32 * 1024, 2, SECT_4K) },
+ { "is25wp032", INFO(0x9d7016, 0, 64 * 1024, 64,
+ SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
+ { "is25wp064", INFO(0x9d7017, 0, 64 * 1024, 128,
+ SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
+ { "is25wp128", INFO(0x9d7018, 0, 64 * 1024, 256,
+ SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
/* Macronix */
{ "mx25l512e", INFO(0xc22010, 0, 64 * 1024, 1, SECT_4K) },
--
2.17.1
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 7b2c63de20080c18d0de35b292ad61fc9bc8328e ]
platform_get_irq() returns an error code, but the host1x driver
ignores it and always returns -ENXIO. This is not correct and,
prevents -EPROBE_DEFER from being propagated properly.
Notice that platform_get_irq() no longer returns 0 on error:
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=e330b9a6bb35dc7097a4f02cb1ae7b6f96df92af
Print and propagate the return value of platform_get_irq on failure.
This issue was detected with the help of Coccinelle.
Signed-off-by: Gustavo A. R. Silva <[email protected]>
Signed-off-by: Thierry Reding <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/host1x/dev.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/host1x/dev.c b/drivers/gpu/host1x/dev.c
index 53d3d1d45b48..ce1b10a2ae85 100644
--- a/drivers/gpu/host1x/dev.c
+++ b/drivers/gpu/host1x/dev.c
@@ -116,8 +116,8 @@ static int host1x_probe(struct platform_device *pdev)
syncpt_irq = platform_get_irq(pdev, 0);
if (syncpt_irq < 0) {
- dev_err(&pdev->dev, "failed to get IRQ\n");
- return -ENXIO;
+ dev_err(&pdev->dev, "failed to get IRQ: %d\n", syncpt_irq);
+ return syncpt_irq;
}
host = devm_kzalloc(&pdev->dev, sizeof(*host), GFP_KERNEL);
--
2.17.1
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 4f3b193dee4423d8c89c9a3e8e05f9197ea459a4 ]
Call put_device() and return error code if devm_add_action() fails.
Signed-off-by: Jarkko Sakkinen <[email protected]>
Reported-by: Jason Gunthorpe <[email protected]>
Fixes: 8e0ee3c9faed ("tpm: fix the cleanup of struct tpm_chip")
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/char/tpm/tpm-chip.c | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
diff --git a/drivers/char/tpm/tpm-chip.c b/drivers/char/tpm/tpm-chip.c
index e759100e41a7..28894878dcd5 100644
--- a/drivers/char/tpm/tpm-chip.c
+++ b/drivers/char/tpm/tpm-chip.c
@@ -230,7 +230,11 @@ struct tpm_chip *tpmm_chip_alloc(struct device *dev,
chip->cdev.owner = dev->driver->owner;
chip->cdev.kobj.parent = &chip->dev.kobj;
- devm_add_action(dev, (void (*)(void *)) put_device, &chip->dev);
+ rc = devm_add_action(dev, (void (*)(void *)) put_device, &chip->dev);
+ if (rc) {
+ put_device(&chip->dev);
+ return ERR_PTR(rc);
+ }
return chip;
}
--
2.17.1
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit a3c18422a4b4e108bcf6a2328f48867e1003fd95 ]
Socket must be held while under the protection of the l2tp lock; there
is no guarantee that sk remains valid after the read_unlock_bh() call.
Same issue for l2tp_ip and l2tp_ip6.
Signed-off-by: Guillaume Nault <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/l2tp/l2tp_ip.c | 11 ++++++-----
net/l2tp/l2tp_ip6.c | 11 ++++++-----
2 files changed, 12 insertions(+), 10 deletions(-)
diff --git a/net/l2tp/l2tp_ip.c b/net/l2tp/l2tp_ip.c
index 48ab93842322..c7e6098c924e 100644
--- a/net/l2tp/l2tp_ip.c
+++ b/net/l2tp/l2tp_ip.c
@@ -184,14 +184,15 @@ pass_up:
read_lock_bh(&l2tp_ip_lock);
sk = __l2tp_ip_bind_lookup(net, iph->daddr, 0, tunnel_id);
+ if (!sk) {
+ read_unlock_bh(&l2tp_ip_lock);
+ goto discard;
+ }
+
+ sock_hold(sk);
read_unlock_bh(&l2tp_ip_lock);
}
- if (sk == NULL)
- goto discard;
-
- sock_hold(sk);
-
if (!xfrm4_policy_check(sk, XFRM_POLICY_IN, skb))
goto discard_put;
diff --git a/net/l2tp/l2tp_ip6.c b/net/l2tp/l2tp_ip6.c
index bcdab1cba773..5fe0a6f6af3d 100644
--- a/net/l2tp/l2tp_ip6.c
+++ b/net/l2tp/l2tp_ip6.c
@@ -196,14 +196,15 @@ pass_up:
read_lock_bh(&l2tp_ip6_lock);
sk = __l2tp_ip6_bind_lookup(&init_net, &iph->daddr,
0, tunnel_id);
+ if (!sk) {
+ read_unlock_bh(&l2tp_ip6_lock);
+ goto discard;
+ }
+
+ sock_hold(sk);
read_unlock_bh(&l2tp_ip6_lock);
}
- if (sk == NULL)
- goto discard;
-
- sock_hold(sk);
-
if (!xfrm6_policy_check(sk, XFRM_POLICY_IN, skb))
goto discard_put;
--
2.17.1
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 7f92083eb58f85ea114d97f65fcbe22be5b0468d ]
This is the same fix than commit a5d0dc810abf ("vti: flush x-netns xfrm
cache when vti interface is removed")
This patch fixes a refcnt problem when a x-netns vti6 interface is removed:
unregister_netdevice: waiting for vti6_test to become free. Usage count = 1
Here is a script to reproduce the problem:
ip link set dev ntfp2 up
ip addr add dev ntfp2 2001::1/64
ip link add vti6_test type vti6 local 2001::1 remote 2001::2 key 1
ip netns add secure
ip link set vti6_test netns secure
ip netns exec secure ip link set vti6_test up
ip netns exec secure ip link s lo up
ip netns exec secure ip addr add dev vti6_test 2003::1/64
ip -6 xfrm policy add dir out tmpl src 2001::1 dst 2001::2 proto esp \
mode tunnel mark 1
ip -6 xfrm policy add dir in tmpl src 2001::2 dst 2001::1 proto esp \
mode tunnel mark 1
ip xfrm state add src 2001::1 dst 2001::2 proto esp spi 1 mode tunnel \
enc des3_ede 0x112233445566778811223344556677881122334455667788 mark 1
ip xfrm state add src 2001::2 dst 2001::1 proto esp spi 1 mode tunnel \
enc des3_ede 0x112233445566778811223344556677881122334455667788 mark 1
ip netns exec secure ping6 -c 4 2003::2
ip netns del secure
CC: Lance Richardson <[email protected]>
Signed-off-by: Nicolas Dichtel <[email protected]>
Acked-by: Lance Richardson <[email protected]>
Signed-off-by: Steffen Klassert <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/ipv6/ip6_vti.c | 31 +++++++++++++++++++++++++++++++
1 file changed, 31 insertions(+)
diff --git a/net/ipv6/ip6_vti.c b/net/ipv6/ip6_vti.c
index 60d4052d97a6..51da5987952c 100644
--- a/net/ipv6/ip6_vti.c
+++ b/net/ipv6/ip6_vti.c
@@ -1140,6 +1140,33 @@ static struct xfrm6_protocol vti_ipcomp6_protocol __read_mostly = {
.priority = 100,
};
+static bool is_vti6_tunnel(const struct net_device *dev)
+{
+ return dev->netdev_ops == &vti6_netdev_ops;
+}
+
+static int vti6_device_event(struct notifier_block *unused,
+ unsigned long event, void *ptr)
+{
+ struct net_device *dev = netdev_notifier_info_to_dev(ptr);
+ struct ip6_tnl *t = netdev_priv(dev);
+
+ if (!is_vti6_tunnel(dev))
+ return NOTIFY_DONE;
+
+ switch (event) {
+ case NETDEV_DOWN:
+ if (!net_eq(t->net, dev_net(dev)))
+ xfrm_garbage_collect(t->net);
+ break;
+ }
+ return NOTIFY_DONE;
+}
+
+static struct notifier_block vti6_notifier_block __read_mostly = {
+ .notifier_call = vti6_device_event,
+};
+
/**
* vti6_tunnel_init - register protocol and reserve needed resources
*
@@ -1150,6 +1177,8 @@ static int __init vti6_tunnel_init(void)
const char *msg;
int err;
+ register_netdevice_notifier(&vti6_notifier_block);
+
msg = "tunnel device";
err = register_pernet_device(&vti6_net_ops);
if (err < 0)
@@ -1182,6 +1211,7 @@ xfrm_proto_ah_failed:
xfrm_proto_esp_failed:
unregister_pernet_device(&vti6_net_ops);
pernet_dev_failed:
+ unregister_netdevice_notifier(&vti6_notifier_block);
pr_err("vti6 init: failed to register %s\n", msg);
return err;
}
@@ -1196,6 +1226,7 @@ static void __exit vti6_tunnel_cleanup(void)
xfrm6_protocol_deregister(&vti_ah6_protocol, IPPROTO_AH);
xfrm6_protocol_deregister(&vti_esp6_protocol, IPPROTO_ESP);
unregister_pernet_device(&vti6_net_ops);
+ unregister_netdevice_notifier(&vti6_notifier_block);
}
module_init(vti6_tunnel_init);
--
2.17.1
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit c3483384ee511ee2af40b4076366cd82a6a47b86 ]
This patch should fix the issues seen with a recent fix to prevent
tunnel-in-tunnel frames from being generated with GRO. The fix itself is
correct for now as long as we do not add any devices that support
NETIF_F_GSO_GRE_CSUM. When such a device is added it could have the
potential to mess things up due to the fact that the outer transport header
points to the outer UDP header and not the GRE header as would be expected.
Fixes: fac8e0f579695 ("tunnels: Don't apply GRO to multiple layers of encapsulation.")
Signed-off-by: Alexander Duyck <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/ipv4/fou.c | 16 ++++++++++++++++
1 file changed, 16 insertions(+)
diff --git a/net/ipv4/fou.c b/net/ipv4/fou.c
index 08d8ee124538..d83888bc33d3 100644
--- a/net/ipv4/fou.c
+++ b/net/ipv4/fou.c
@@ -195,6 +195,14 @@ static struct sk_buff **fou_gro_receive(struct sk_buff **head,
u8 proto = NAPI_GRO_CB(skb)->proto;
const struct net_offload **offloads;
+ /* We can clear the encap_mark for FOU as we are essentially doing
+ * one of two possible things. We are either adding an L4 tunnel
+ * header to the outer L3 tunnel header, or we are are simply
+ * treating the GRE tunnel header as though it is a UDP protocol
+ * specific header such as VXLAN or GENEVE.
+ */
+ NAPI_GRO_CB(skb)->encap_mark = 0;
+
rcu_read_lock();
offloads = NAPI_GRO_CB(skb)->is_ipv6 ? inet6_offloads : inet_offloads;
ops = rcu_dereference(offloads[proto]);
@@ -354,6 +362,14 @@ static struct sk_buff **gue_gro_receive(struct sk_buff **head,
}
}
+ /* We can clear the encap_mark for GUE as we are essentially doing
+ * one of two possible things. We are either adding an L4 tunnel
+ * header to the outer L3 tunnel header, or we are are simply
+ * treating the GRE tunnel header as though it is a UDP protocol
+ * specific header such as VXLAN or GENEVE.
+ */
+ NAPI_GRO_CB(skb)->encap_mark = 0;
+
rcu_read_lock();
offloads = NAPI_GRO_CB(skb)->is_ipv6 ? inet6_offloads : inet_offloads;
ops = rcu_dereference(offloads[guehdr->proto_ctype]);
--
2.17.1
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 3ca2b2506ec9a3b1615930a6810d30ec9aba10a1 ]
The X550EM_x revision check needs to check a value, not just a bit.
Use a mask and check the value. Also remove the redundant check
inside the ixgbe_enter_lplu_t_x550em, because it can only be called
when both the mac type and revision check pass.
Signed-off-by: Mark Rustad <[email protected]>
Tested-by: Phil Schmitt <[email protected]>
Signed-off-by: Jeff Kirsher <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/intel/ixgbe/ixgbe_type.h | 2 +-
drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c | 9 +++------
2 files changed, 4 insertions(+), 7 deletions(-)
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h b/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h
index 995f03107eac..04bc4df82fa7 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h
@@ -3508,7 +3508,7 @@ struct ixgbe_info {
#define IXGBE_FUSES0_GROUP(_i) (0x11158 + ((_i) * 4))
#define IXGBE_FUSES0_300MHZ BIT(5)
-#define IXGBE_FUSES0_REV1 BIT(6)
+#define IXGBE_FUSES0_REV_MASK (3 << 6)
#define IXGBE_KRM_PORT_CAR_GEN_CTRL(P) ((P) ? 0x8010 : 0x4010)
#define IXGBE_KRM_LINK_CTRL_1(P) ((P) ? 0x820C : 0x420C)
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c
index a75f2e3ce86f..ffd2e74e5638 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c
@@ -1873,10 +1873,6 @@ static s32 ixgbe_enter_lplu_t_x550em(struct ixgbe_hw *hw)
u32 save_autoneg;
bool link_up;
- /* SW LPLU not required on later HW revisions. */
- if (IXGBE_FUSES0_REV1 & IXGBE_READ_REG(hw, IXGBE_FUSES0_GROUP(0)))
- return 0;
-
/* If blocked by MNG FW, then don't restart AN */
if (ixgbe_check_reset_blocked(hw))
return 0;
@@ -2030,8 +2026,9 @@ static s32 ixgbe_init_phy_ops_X550em(struct ixgbe_hw *hw)
}
/* setup SW LPLU only for first revision */
- if (!(IXGBE_FUSES0_REV1 & IXGBE_READ_REG(hw,
- IXGBE_FUSES0_GROUP(0))))
+ if (hw->mac.type == ixgbe_mac_X550EM_x &&
+ !(IXGBE_READ_REG(hw, IXGBE_FUSES0_GROUP(0)) &
+ IXGBE_FUSES0_REV_MASK))
phy->ops.enter_lplu = ixgbe_enter_lplu_t_x550em;
phy->ops.handle_lasi = ixgbe_handle_lasi_ext_t_x550em;
--
2.17.1
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 85082dba0a5059c538cfa786d07f5ec5370d22fe ]
Upon changing num_channels, reset the RSS indirection table to
match the new value.
Fixes: 2d75b2bc8a8c ('net/mlx5e: Add ethtool RSS configuration options')
Signed-off-by: Tariq Toukan <[email protected]>
Signed-off-by: Saeed Mahameed <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/mellanox/mlx5/core/en.h | 2 ++
.../net/ethernet/mellanox/mlx5/core/en_ethtool.c | 2 ++
drivers/net/ethernet/mellanox/mlx5/core/en_main.c | 15 +++++++++++----
3 files changed, 15 insertions(+), 4 deletions(-)
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en.h b/drivers/net/ethernet/mellanox/mlx5/core/en.h
index 22e72bf1ae48..7a716733d9ca 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en.h
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en.h
@@ -586,6 +586,8 @@ int mlx5e_redirect_rqt(struct mlx5e_priv *priv, enum mlx5e_rqt_ix rqt_ix);
int mlx5e_open_locked(struct net_device *netdev);
int mlx5e_close_locked(struct net_device *netdev);
+void mlx5e_build_default_indir_rqt(u32 *indirection_rqt, int len,
+ int num_channels);
static inline void mlx5e_tx_notify_hw(struct mlx5e_sq *sq,
struct mlx5e_tx_wqe *wqe, int bf_sz)
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c b/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c
index 7cc9df717323..7ee301310817 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c
@@ -385,6 +385,8 @@ static int mlx5e_set_channels(struct net_device *dev,
mlx5e_close_locked(dev);
priv->params.num_channels = count;
+ mlx5e_build_default_indir_rqt(priv->params.indirection_rqt,
+ MLX5E_INDIR_RQT_SIZE, count);
if (was_opened)
err = mlx5e_open_locked(dev);
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c
index 765b069d6a90..26d25ecdca7e 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c
@@ -1186,7 +1186,6 @@ static void mlx5e_fill_indir_rqt_rqns(struct mlx5e_priv *priv, void *rqtc)
ix = mlx5e_bits_invert(i, MLX5E_LOG_INDIR_RQT_SIZE);
ix = priv->params.indirection_rqt[ix];
- ix = ix % priv->params.num_channels;
MLX5_SET(rqtc, rqtc, rq_num[i],
test_bit(MLX5E_STATE_OPENED, &priv->state) ?
priv->channel[ix]->rq.rqn :
@@ -1983,12 +1982,20 @@ u16 mlx5e_get_max_inline_cap(struct mlx5_core_dev *mdev)
2 /*sizeof(mlx5e_tx_wqe.inline_hdr_start)*/;
}
+void mlx5e_build_default_indir_rqt(u32 *indirection_rqt, int len,
+ int num_channels)
+{
+ int i;
+
+ for (i = 0; i < len; i++)
+ indirection_rqt[i] = i % num_channels;
+}
+
static void mlx5e_build_netdev_priv(struct mlx5_core_dev *mdev,
struct net_device *netdev,
int num_channels)
{
struct mlx5e_priv *priv = netdev_priv(netdev);
- int i;
priv->params.log_sq_size =
MLX5E_PARAMS_DEFAULT_LOG_SQ_SIZE;
@@ -2012,8 +2019,8 @@ static void mlx5e_build_netdev_priv(struct mlx5_core_dev *mdev,
netdev_rss_key_fill(priv->params.toeplitz_hash_key,
sizeof(priv->params.toeplitz_hash_key));
- for (i = 0; i < MLX5E_INDIR_RQT_SIZE; i++)
- priv->params.indirection_rqt[i] = i % num_channels;
+ mlx5e_build_default_indir_rqt(priv->params.indirection_rqt,
+ MLX5E_INDIR_RQT_SIZE, num_channels);
priv->params.lro_wqe_sz =
MLX5E_PARAMS_DEFAULT_LRO_WQE_SZ;
--
2.17.1
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit d5468d7afaa9c9e961e150f0455a14a9f4872a98 ]
Commit 588afcc1c0e4 ("[media] usbvision fix overflow of interfaces
array")' should be reverted, because:
* "!dev->actconfig->interface[ifnum]" won't catch a case where the value
is not NULL but some garbage. This way the system may crash later with
GPF.
* "(ifnum >= USB_MAXINTERFACES)" does not cover all the error
conditions. "ifnum" should be compared to "dev->actconfig->
desc.bNumInterfaces", i.e. compared to the number of "struct
usb_interface" kzalloc()-ed, not to USB_MAXINTERFACES.
* There is a "struct usb_device" leak in this error path, as there is
usb_get_dev(), but no usb_put_dev() on this path.
* There is a bug of the same type several lines below with number of
endpoints. The code is accessing hard-coded second endpoint
("interface->endpoint[1].desc") which may not exist. It would be great
to handle this in the same patch too.
* All the concerns above are resolved by already-accepted commit fa52bd50
("[media] usbvision: fix crash on detecting device with invalid
configuration")
* Mailing list message:
http://www.spinics.net/lists/linux-media/msg94832.html
Signed-off-by: Vladis Dronov <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
Cc: <[email protected]> # for v4.5
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/media/usb/usbvision/usbvision-video.c | 7 -------
1 file changed, 7 deletions(-)
diff --git a/drivers/media/usb/usbvision/usbvision-video.c b/drivers/media/usb/usbvision/usbvision-video.c
index cafc34938a79..91d709efef7a 100644
--- a/drivers/media/usb/usbvision/usbvision-video.c
+++ b/drivers/media/usb/usbvision/usbvision-video.c
@@ -1461,13 +1461,6 @@ static int usbvision_probe(struct usb_interface *intf,
printk(KERN_INFO "%s: %s found\n", __func__,
usbvision_device_data[model].model_string);
- /*
- * this is a security check.
- * an exploit using an incorrect bInterfaceNumber is known
- */
- if (ifnum >= USB_MAXINTERFACES || !dev->actconfig->interface[ifnum])
- return -ENODEV;
-
if (usbvision_device_data[model].interface >= 0)
interface = &dev->actconfig->interface[usbvision_device_data[model].interface]->altsetting[0];
else if (ifnum < dev->actconfig->desc.bNumInterfaces)
--
2.17.1
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 46edf52d08342b3dc1f9a61c5200ab8b1c0f5a37 ]
platform_get_irq() returns an error code, but the imx21-hcd driver
ignores it and always returns -ENXIO. This is not correct, and
prevents -EPROBE_DEFER from being propagated properly.
Notice that platform_get_irq() no longer returns 0 on error:
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=e330b9a6bb35dc7097a4f02cb1ae7b6f96df92af
Print error message and propagate the return value of platform_get_irq
on failure.
This issue was detected with the help of Coccinelle.
Signed-off-by: Gustavo A. R. Silva <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/usb/host/imx21-hcd.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/drivers/usb/host/imx21-hcd.c b/drivers/usb/host/imx21-hcd.c
index f542045dc2a6..e25d72e0527f 100644
--- a/drivers/usb/host/imx21-hcd.c
+++ b/drivers/usb/host/imx21-hcd.c
@@ -1849,8 +1849,10 @@ static int imx21_probe(struct platform_device *pdev)
if (!res)
return -ENODEV;
irq = platform_get_irq(pdev, 0);
- if (irq < 0)
- return -ENXIO;
+ if (irq < 0) {
+ dev_err(&pdev->dev, "Failed to get IRQ: %d\n", irq);
+ return irq;
+ }
hcd = usb_create_hcd(&imx21_hc_driver,
&pdev->dev, dev_name(&pdev->dev));
--
2.17.1
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 116d77fea02e2a5aded7d29ba4c692774cb339f1 ]
The adapter has to be started after updating the number of MSIX Vectors
Fixes: ecc479e00db8 (aacraid: Set correct MSIX count for EEH recovery)
Cc: [email protected]
Signed-off-by: Raghava Aditya Renukunta <[email protected]>
Reviewed-by: Johannes Thumshirn <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/scsi/aacraid/linit.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/scsi/aacraid/linit.c b/drivers/scsi/aacraid/linit.c
index 8da8b46da722..1c447405ebbf 100644
--- a/drivers/scsi/aacraid/linit.c
+++ b/drivers/scsi/aacraid/linit.c
@@ -1416,8 +1416,8 @@ static int aac_acquire_resources(struct aac_dev *dev)
/* After EEH recovery or suspend resume, max_msix count
* may change, therfore updating in init as well.
*/
- aac_adapter_start(dev);
dev->init->Sa_MSIXVectors = cpu_to_le32(dev->max_msix);
+ aac_adapter_start(dev);
}
return 0;
--
2.17.1
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 7588f1ecc5f0c914e669d8afb6525f47cd1c4355 ]
platform_get_irq() returns an error code, but the pxa3xx_gcu driver
ignores it and always returns -ENODEV. This is not correct and,
prevents -EPROBE_DEFER from being propagated properly.
Also, notice that platform_get_irq() no longer returns 0 on error:
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=e330b9a6bb35dc7097a4f02cb1ae7b6f96df92af
Print and propagate the return value of platform_get_irq on failure.
This issue was detected with the help of Coccinelle.
Signed-off-by: Gustavo A. R. Silva <[email protected]>
Signed-off-by: Bartlomiej Zolnierkiewicz <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/video/fbdev/pxa3xx-gcu.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/video/fbdev/pxa3xx-gcu.c b/drivers/video/fbdev/pxa3xx-gcu.c
index 50bce45e7f3d..933619da1a94 100644
--- a/drivers/video/fbdev/pxa3xx-gcu.c
+++ b/drivers/video/fbdev/pxa3xx-gcu.c
@@ -626,8 +626,8 @@ static int pxa3xx_gcu_probe(struct platform_device *pdev)
/* request the IRQ */
irq = platform_get_irq(pdev, 0);
if (irq < 0) {
- dev_err(dev, "no IRQ defined\n");
- return -ENODEV;
+ dev_err(dev, "no IRQ defined: %d\n", irq);
+ return irq;
}
ret = devm_request_irq(dev, irq, pxa3xx_gcu_handle_irq,
--
2.17.1
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 201c2f85bd0bc13b712d9c0b3d11251b182e06ae ]
In the error path, event_file not being NULL is used to determine
whether the event itself still needs to be free'd, so fix it up to
avoid leaking.
Reported-by: Leon Yu <[email protected]>
Signed-off-by: Alexander Shishkin <[email protected]>
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Cc: Arnaldo Carvalho de Melo <[email protected]>
Cc: Arnaldo Carvalho de Melo <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Vince Weaver <[email protected]>
Fixes: 130056275ade ("perf: Do not double free")
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Ingo Molnar <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
kernel/events/core.c | 1 +
1 file changed, 1 insertion(+)
--- a/kernel/events/core.c
+++ b/kernel/events/core.c
@@ -8532,6 +8532,7 @@ SYSCALL_DEFINE5(perf_event_open,
f_flags);
if (IS_ERR(event_file)) {
err = PTR_ERR(event_file);
+ event_file = NULL;
goto err_context;
}
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 4813766325374af6ed0b66879ba6a0bbb05c83b6 ]
This is similar to an earlier commit 52dfcc5ccfbb ("drm/nouveau: fix for
disabled fbdev emulation"), but protects all occurrences of helper.fbdev
in the source.
I see oops in nouveau_fbcon_accel_save_disable() called from
nouveau_fbcon_set_suspend_work() on Linux 3.13 when
CONFIG_DRM_FBDEV_EMULATION option is disabled.
Signed-off-by: Pavel Roskin <[email protected]>
Reviewed-by: Daniel Vetter <[email protected]>
Signed-off-by: Ben Skeggs <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/nouveau/nouveau_fbcon.c | 7 ++++---
1 file changed, 4 insertions(+), 3 deletions(-)
diff --git a/drivers/gpu/drm/nouveau/nouveau_fbcon.c b/drivers/gpu/drm/nouveau/nouveau_fbcon.c
index e40a1b07a014..343476d15726 100644
--- a/drivers/gpu/drm/nouveau/nouveau_fbcon.c
+++ b/drivers/gpu/drm/nouveau/nouveau_fbcon.c
@@ -235,7 +235,7 @@ void
nouveau_fbcon_accel_save_disable(struct drm_device *dev)
{
struct nouveau_drm *drm = nouveau_drm(dev);
- if (drm->fbcon) {
+ if (drm->fbcon && drm->fbcon->helper.fbdev) {
drm->fbcon->saved_flags = drm->fbcon->helper.fbdev->flags;
drm->fbcon->helper.fbdev->flags |= FBINFO_HWACCEL_DISABLED;
}
@@ -245,7 +245,7 @@ void
nouveau_fbcon_accel_restore(struct drm_device *dev)
{
struct nouveau_drm *drm = nouveau_drm(dev);
- if (drm->fbcon) {
+ if (drm->fbcon && drm->fbcon->helper.fbdev) {
drm->fbcon->helper.fbdev->flags = drm->fbcon->saved_flags;
}
}
@@ -257,7 +257,8 @@ nouveau_fbcon_accel_fini(struct drm_device *dev)
struct nouveau_fbdev *fbcon = drm->fbcon;
if (fbcon && drm->channel) {
console_lock();
- fbcon->helper.fbdev->flags |= FBINFO_HWACCEL_DISABLED;
+ if (fbcon->helper.fbdev)
+ fbcon->helper.fbdev->flags |= FBINFO_HWACCEL_DISABLED;
console_unlock();
nouveau_channel_idle(drm->channel);
nvif_object_fini(&fbcon->twod);
--
2.17.1
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit d0f71afffa1c3d5a36a4a278f1dbbd2643176dc3 ]
This is the same patch as for ixgbe but applied differently according to
busy polling. See commit 5d6002b7b822c74 ("ixgbe: Fix handling of NAPI
budget when multiple queues are enabled per vector")
Signed-off-by: William Dauchy <[email protected]>
Tested-by: Phil Schmitt <[email protected]>
Signed-off-by: Jeff Kirsher <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c b/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c
index 50bbad37d640..723bda33472a 100644
--- a/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c
+++ b/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c
@@ -1014,6 +1014,8 @@ static int ixgbevf_poll(struct napi_struct *napi, int budget)
ixgbevf_for_each_ring(ring, q_vector->tx)
clean_complete &= ixgbevf_clean_tx_irq(q_vector, ring);
+ if (budget <= 0)
+ return budget;
#ifdef CONFIG_NET_RX_BUSY_POLL
if (!ixgbevf_qv_lock_napi(q_vector))
return budget;
--
2.17.1
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 1aacde3d22c42281236155c1ef6d7a5aa32a826b ]
Jann Horn reported following analysis that could potentially result
in a very hard to trigger (if not impossible) UAF race, to quote his
event timeline:
- Set up a process with threads T1, T2 and T3
- Let T1 set up a socket filter F1 that invokes another filter F2
through a BPF map [tail call]
- Let T1 trigger the socket filter via a unix domain socket write,
don't wait for completion
- Let T2 call PERF_EVENT_IOC_SET_BPF with F2, don't wait for completion
- Now T2 should be behind bpf_prog_get(), but before bpf_prog_put()
- Let T3 close the file descriptor for F2, dropping the reference
count of F2 to 2
- At this point, T1 should have looked up F2 from the map, but not
finished executing it
- Let T3 remove F2 from the BPF map, dropping the reference count of
F2 to 1
- Now T2 should call bpf_prog_put() (wrong BPF program type), dropping
the reference count of F2 to 0 and scheduling bpf_prog_free_deferred()
via schedule_work()
- At this point, the BPF program could be freed
- BPF execution is still running in a freed BPF program
While at PERF_EVENT_IOC_SET_BPF time it's only guaranteed that the perf
event fd we're doing the syscall on doesn't disappear from underneath us
for whole syscall time, it may not be the case for the bpf fd used as
an argument only after we did the put. It needs to be a valid fd pointing
to a BPF program at the time of the call to make the bpf_prog_get() and
while T2 gets preempted, F2 must have dropped reference to 1 on the other
CPU. The fput() from the close() in T3 should also add additionally delay
to the reference drop via exit_task_work() when bpf_prog_release() gets
called as well as scheduling bpf_prog_free_deferred().
That said, it makes nevertheless sense to move the BPF prog destruction
generally after RCU grace period to guarantee that such scenario above,
but also others as recently fixed in ceb56070359b ("bpf, perf: delay release
of BPF prog after grace period") with regards to tail calls won't happen.
Integrating bpf_prog_free_deferred() directly into the RCU callback is
not allowed since the invocation might happen from either softirq or
process context, so we're not permitted to block. Reviewing all bpf_prog_put()
invocations from eBPF side (note, cBPF -> eBPF progs don't use this for
their destruction) with call_rcu() look good to me.
Since we don't know whether at the time of attaching the program, we're
already part of a tail call map, we need to use RCU variant. However, due
to this, there won't be severely more stress on the RCU callback queue:
situations with above bpf_prog_get() and bpf_prog_put() combo in practice
normally won't lead to releases, but even if they would, enough effort/
cycles have to be put into loading a BPF program into the kernel already.
Reported-by: Jann Horn <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Acked-by: Alexei Starovoitov <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
include/linux/bpf.h | 5 -----
kernel/bpf/arraymap.c | 4 +---
kernel/bpf/syscall.c | 13 +++----------
kernel/events/core.c | 2 +-
4 files changed, 5 insertions(+), 19 deletions(-)
--- a/include/linux/bpf.h
+++ b/include/linux/bpf.h
@@ -177,7 +177,6 @@ void bpf_register_map_type(struct bpf_ma
struct bpf_prog *bpf_prog_get(u32 ufd);
struct bpf_prog *bpf_prog_inc(struct bpf_prog *prog);
void bpf_prog_put(struct bpf_prog *prog);
-void bpf_prog_put_rcu(struct bpf_prog *prog);
struct bpf_map *bpf_map_get_with_uref(u32 ufd);
struct bpf_map *__bpf_map_get(struct fd f);
@@ -208,10 +207,6 @@ static inline struct bpf_prog *bpf_prog_
static inline void bpf_prog_put(struct bpf_prog *prog)
{
}
-
-static inline void bpf_prog_put_rcu(struct bpf_prog *prog)
-{
-}
#endif /* CONFIG_BPF_SYSCALL */
/* verifier prototypes for helper functions called from eBPF programs */
--- a/kernel/bpf/arraymap.c
+++ b/kernel/bpf/arraymap.c
@@ -270,9 +270,7 @@ static void *prog_fd_array_get_ptr(struc
static void prog_fd_array_put_ptr(void *ptr)
{
- struct bpf_prog *prog = ptr;
-
- bpf_prog_put_rcu(prog);
+ bpf_prog_put(ptr);
}
/* decrement refcnt of all bpf_progs that are stored in this map */
--- a/kernel/bpf/syscall.c
+++ b/kernel/bpf/syscall.c
@@ -487,7 +487,7 @@ static void bpf_prog_uncharge_memlock(st
free_uid(user);
}
-static void __prog_put_common(struct rcu_head *rcu)
+static void __bpf_prog_put_rcu(struct rcu_head *rcu)
{
struct bpf_prog_aux *aux = container_of(rcu, struct bpf_prog_aux, rcu);
@@ -496,17 +496,10 @@ static void __prog_put_common(struct rcu
bpf_prog_free(aux->prog);
}
-/* version of bpf_prog_put() that is called after a grace period */
-void bpf_prog_put_rcu(struct bpf_prog *prog)
-{
- if (atomic_dec_and_test(&prog->aux->refcnt))
- call_rcu(&prog->aux->rcu, __prog_put_common);
-}
-
void bpf_prog_put(struct bpf_prog *prog)
{
if (atomic_dec_and_test(&prog->aux->refcnt))
- __prog_put_common(&prog->aux->rcu);
+ call_rcu(&prog->aux->rcu, __bpf_prog_put_rcu);
}
EXPORT_SYMBOL_GPL(bpf_prog_put);
@@ -514,7 +507,7 @@ static int bpf_prog_release(struct inode
{
struct bpf_prog *prog = filp->private_data;
- bpf_prog_put_rcu(prog);
+ bpf_prog_put(prog);
return 0;
}
--- a/kernel/events/core.c
+++ b/kernel/events/core.c
@@ -7141,7 +7141,7 @@ static void perf_event_free_bpf_prog(str
prog = event->tp_event->prog;
if (prog && event->tp_event->bpf_prog_owner == event) {
event->tp_event->prog = NULL;
- bpf_prog_put_rcu(prog);
+ bpf_prog_put(prog);
}
}
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit d7f4f332f082c4d4ba53582f902ed6b44fd6f45e ]
Fixes: 2ccccf5fb43f ("net_sched: update hierarchical backlog too")
Cc: Jamal Hadi Salim <[email protected]>
Signed-off-by: Cong Wang <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/sched/sch_red.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/net/sched/sch_red.c b/net/sched/sch_red.c
index 0505b8408c8b..4bf2b599ef98 100644
--- a/net/sched/sch_red.c
+++ b/net/sched/sch_red.c
@@ -97,6 +97,7 @@ static int red_enqueue(struct sk_buff *skb, struct Qdisc *sch)
ret = qdisc_enqueue(skb, child);
if (likely(ret == NET_XMIT_SUCCESS)) {
+ qdisc_qstats_backlog_inc(sch, skb);
sch->q.qlen++;
} else if (net_xmit_drop_count(ret)) {
q->stats.pdrop++;
@@ -118,6 +119,7 @@ static struct sk_buff *red_dequeue(struct Qdisc *sch)
skb = child->dequeue(child);
if (skb) {
qdisc_bstats_update(sch, skb);
+ qdisc_qstats_backlog_dec(sch, skb);
sch->q.qlen--;
} else {
if (!red_is_idling(&q->vars))
@@ -143,6 +145,7 @@ static unsigned int red_drop(struct Qdisc *sch)
if (child->ops->drop && (len = child->ops->drop(child)) > 0) {
q->stats.other++;
qdisc_qstats_drop(sch);
+ sch->qstats.backlog -= len;
sch->q.qlen--;
return len;
}
@@ -158,6 +161,7 @@ static void red_reset(struct Qdisc *sch)
struct red_sched_data *q = qdisc_priv(sch);
qdisc_reset(q->qdisc);
+ sch->qstats.backlog = 0;
sch->q.qlen = 0;
red_restart(&q->vars);
}
--
2.17.1
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit f9279c968c257ee39b0d7bd2571a4d231a67bcc1 ]
The addition of the STARGET_REMOVE state had the side effect of
introducing a race condition that can cause a crash.
scsi_target_reap_ref_release() checks the starget->state to
see if it still in STARGET_CREATED, and if so, skips calling
transport_remove_device() and device_del(), because the starget->state
is only set to STARGET_RUNNING after scsi_target_add() has called
device_add() and transport_add_device().
However, if an rport loss occurs while a target is being scanned,
it can happen that scsi_remove_target() will be called while the
starget is still in the STARGET_CREATED state. In this case, the
starget->state will be set to STARGET_REMOVE, and as a result,
scsi_target_reap_ref_release() will take the wrong path. The end
result is a panic:
[ 1255.356653] Oops: 0000 [#1] SMP
[ 1255.360154] Modules linked in: x86_pkg_temp_thermal kvm_intel kvm irqbypass crc32c_intel ghash_clmulni_i
[ 1255.393234] CPU: 5 PID: 149 Comm: kworker/u96:4 Tainted: G W 4.11.0+ #8
[ 1255.401879] Hardware name: Dell Inc. PowerEdge R320/08VT7V, BIOS 2.0.22 11/19/2013
[ 1255.410327] Workqueue: scsi_wq_6 fc_scsi_scan_rport [scsi_transport_fc]
[ 1255.417720] task: ffff88060ca8c8c0 task.stack: ffffc900048a8000
[ 1255.424331] RIP: 0010:kernfs_find_ns+0x13/0xc0
[ 1255.429287] RSP: 0018:ffffc900048abbf0 EFLAGS: 00010246
[ 1255.435123] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000
[ 1255.443083] RDX: 0000000000000000 RSI: ffffffff8188d659 RDI: 0000000000000000
[ 1255.451043] RBP: ffffc900048abc10 R08: 0000000000000000 R09: 0000012433fe0025
[ 1255.459005] R10: 0000000025e5a4b5 R11: 0000000025e5a4b5 R12: ffffffff8188d659
[ 1255.466972] R13: 0000000000000000 R14: ffff8805f55e5088 R15: 0000000000000000
[ 1255.474931] FS: 0000000000000000(0000) GS:ffff880616b40000(0000) knlGS:0000000000000000
[ 1255.483959] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 1255.490370] CR2: 0000000000000068 CR3: 0000000001c09000 CR4: 00000000000406e0
[ 1255.498332] Call Trace:
[ 1255.501058] kernfs_find_and_get_ns+0x31/0x60
[ 1255.505916] sysfs_unmerge_group+0x1d/0x60
[ 1255.510498] dpm_sysfs_remove+0x22/0x60
[ 1255.514783] device_del+0xf4/0x2e0
[ 1255.518577] ? device_remove_file+0x19/0x20
[ 1255.523241] attribute_container_class_device_del+0x1a/0x20
[ 1255.529457] transport_remove_classdev+0x4e/0x60
[ 1255.534607] ? transport_add_class_device+0x40/0x40
[ 1255.540046] attribute_container_device_trigger+0xb0/0xc0
[ 1255.546069] transport_remove_device+0x15/0x20
[ 1255.551025] scsi_target_reap_ref_release+0x25/0x40
[ 1255.556467] scsi_target_reap+0x2e/0x40
[ 1255.560744] __scsi_scan_target+0xaa/0x5b0
[ 1255.565312] scsi_scan_target+0xec/0x100
[ 1255.569689] fc_scsi_scan_rport+0xb1/0xc0 [scsi_transport_fc]
[ 1255.576099] process_one_work+0x14b/0x390
[ 1255.580569] worker_thread+0x4b/0x390
[ 1255.584651] kthread+0x109/0x140
[ 1255.588251] ? rescuer_thread+0x330/0x330
[ 1255.592730] ? kthread_park+0x60/0x60
[ 1255.596815] ret_from_fork+0x29/0x40
[ 1255.600801] Code: 24 08 48 83 42 40 01 5b 41 5c 5d c3 66 66 66 2e 0f 1f 84 00 00 00 00 00 66 66 66 66 90
[ 1255.621876] RIP: kernfs_find_ns+0x13/0xc0 RSP: ffffc900048abbf0
[ 1255.628479] CR2: 0000000000000068
[ 1255.632756] ---[ end trace 34a69ba0477d036f ]---
Fix this by adding another scsi_target state STARGET_CREATED_REMOVE
to distinguish this case.
Fixes: f05795d3d771 ("scsi: Add intermediate STARGET_REMOVE state to scsi_target_state")
Reported-by: David Jeffery <[email protected]>
Signed-off-by: Ewan D. Milne <[email protected]>
Cc: <[email protected]>
Reviewed-by: Laurence Oberman <[email protected]>
Tested-by: Laurence Oberman <[email protected]>
Reviewed-by: Johannes Thumshirn <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/scsi/scsi_scan.c | 5 +++--
drivers/scsi/scsi_sysfs.c | 8 ++++++--
include/scsi/scsi_device.h | 1 +
3 files changed, 10 insertions(+), 4 deletions(-)
diff --git a/drivers/scsi/scsi_scan.c b/drivers/scsi/scsi_scan.c
index 692445bcca6f..850ddc5fac04 100644
--- a/drivers/scsi/scsi_scan.c
+++ b/drivers/scsi/scsi_scan.c
@@ -381,11 +381,12 @@ static void scsi_target_reap_ref_release(struct kref *kref)
= container_of(kref, struct scsi_target, reap_ref);
/*
- * if we get here and the target is still in the CREATED state that
+ * if we get here and the target is still in a CREATED state that
* means it was allocated but never made visible (because a scan
* turned up no LUNs), so don't call device_del() on it.
*/
- if (starget->state != STARGET_CREATED) {
+ if ((starget->state != STARGET_CREATED) &&
+ (starget->state != STARGET_CREATED_REMOVE)) {
transport_remove_device(&starget->dev);
device_del(&starget->dev);
}
diff --git a/drivers/scsi/scsi_sysfs.c b/drivers/scsi/scsi_sysfs.c
index 8db0c48943d6..085e470d1c49 100644
--- a/drivers/scsi/scsi_sysfs.c
+++ b/drivers/scsi/scsi_sysfs.c
@@ -1212,11 +1212,15 @@ restart:
spin_lock_irqsave(shost->host_lock, flags);
list_for_each_entry(starget, &shost->__targets, siblings) {
if (starget->state == STARGET_DEL ||
- starget->state == STARGET_REMOVE)
+ starget->state == STARGET_REMOVE ||
+ starget->state == STARGET_CREATED_REMOVE)
continue;
if (starget->dev.parent == dev || &starget->dev == dev) {
kref_get(&starget->reap_ref);
- starget->state = STARGET_REMOVE;
+ if (starget->state == STARGET_CREATED)
+ starget->state = STARGET_CREATED_REMOVE;
+ else
+ starget->state = STARGET_REMOVE;
spin_unlock_irqrestore(shost->host_lock, flags);
__scsi_remove_target(starget);
scsi_target_reap(starget);
diff --git a/include/scsi/scsi_device.h b/include/scsi/scsi_device.h
index 293b9a7f53bc..fb53a94a5e8b 100644
--- a/include/scsi/scsi_device.h
+++ b/include/scsi/scsi_device.h
@@ -240,6 +240,7 @@ enum scsi_target_state {
STARGET_CREATED = 1,
STARGET_RUNNING,
STARGET_REMOVE,
+ STARGET_CREATED_REMOVE,
STARGET_DEL,
};
--
2.17.1
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 5ea59db8a375216e6c915c5586f556766673b5a7 ]
An earlier change to this function (3bdae810721b) fixed a leak in the
case of an unsuccessful call to brcmf_sdiod_buffrw(). However, the
glom_skb buffer, used for emulating a scattering read, is never used
or referenced after its contents are copied into the destination
buffers, and therefore always needs to be freed by the end of the
function.
Fixes: 3bdae810721b ("brcmfmac: Fix glob_skb leak in brcmf_sdiod_recv_chain")
Fixes: a413e39a38573 ("brcmfmac: fix brcmf_sdcard_recv_chain() for host without sg support")
Cc: [email protected] # 4.9.x-
Signed-off-by: Peter S. Housel <[email protected]>
Signed-off-by: Arend van Spriel <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c | 7 +++----
1 file changed, 3 insertions(+), 4 deletions(-)
diff --git a/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c b/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c
index 91da67657f81..72e1796c8167 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c
@@ -705,7 +705,7 @@ done:
int brcmf_sdiod_recv_chain(struct brcmf_sdio_dev *sdiodev,
struct sk_buff_head *pktq, uint totlen)
{
- struct sk_buff *glom_skb;
+ struct sk_buff *glom_skb = NULL;
struct sk_buff *skb;
u32 addr = sdiodev->sbwad;
int err = 0;
@@ -726,10 +726,8 @@ int brcmf_sdiod_recv_chain(struct brcmf_sdio_dev *sdiodev,
return -ENOMEM;
err = brcmf_sdiod_buffrw(sdiodev, SDIO_FUNC_2, false, addr,
glom_skb);
- if (err) {
- brcmu_pkt_buf_free_skb(glom_skb);
+ if (err)
goto done;
- }
skb_queue_walk(pktq, skb) {
memcpy(skb->data, glom_skb->data, skb->len);
@@ -740,6 +738,7 @@ int brcmf_sdiod_recv_chain(struct brcmf_sdio_dev *sdiodev,
pktq);
done:
+ brcmu_pkt_buf_free_skb(glom_skb);
return err;
}
--
2.17.1
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit a4fd4a724d6c30ad671046d83be2e9be2f11d275 ]
Ever since commit a621bac3044e ("scsi_lib: correctly retry failed zero
length REQ_TYPE_FS commands"), people have been getting bogus error
messages for USB disk drives using ATA pass-thru. For example:
[ 1344.880193] sd 6:0:0:0: [sdb] Attached SCSI disk
[ 1345.069152] sd 6:0:0:0: [sdb] tag#0 FAILED Result: hostbyte=DID_ERROR driverbyte=DRIVER_SENSE
[ 1345.069159] sd 6:0:0:0: [sdb] tag#0 Sense Key : Hardware Error [current] [descriptor]
[ 1345.069162] sd 6:0:0:0: [sdb] tag#0 Add. Sense: No additional sense information
[ 1345.069168] sd 6:0:0:0: [sdb] tag#0 CDB: ATA command pass through(16) 85 06 20 00 00 00 00 00 00 00 00 00 00 00 e5 00
[ 1345.172252] sd 6:0:0:0: [sdb] tag#0 FAILED Result: hostbyte=DID_ERROR driverbyte=DRIVER_SENSE
[ 1345.172258] sd 6:0:0:0: [sdb] tag#0 Sense Key : Hardware Error [current] [descriptor]
[ 1345.172261] sd 6:0:0:0: [sdb] tag#0 Add. Sense: No additional sense information
[ 1345.172266] sd 6:0:0:0: [sdb] tag#0 CDB: ATA command pass through(12)/Blank a1 06 20 da 00 00 4f c2 00 b0 00 00
These messages can be quite annoying, because programs like udisks2
provoke them every 10 minutes or so. Other programs can also have
this effect, such as those in smartmontools.
I don't fully understand how that commit induced the SCSI core to log
these error messages, but the underlying cause for them is code added
to usb-storage by commit f1a0743bc0e7 ("USB: storage: When a device
returns no sense data, call it a Hardware Error"). At the time it was
necessary to do this, in order to prevent an infinite retry loop with
some not-so-great mass storage devices.
However, the ATA pass-thru protocol uses SCSI sense data to return
command status values, and some devices always report Check Condition
status for ATA pass-thru commands to ensure that the host retrieves
the sense data, even if the command succeeded. This violates the USB
mass-storage protocol (Check Condition status is supposed to mean the
command failed), but we can't help that.
This patch attempts to mitigate the problem of these bogus error
reports by changing usb-storage. The HARDWARE ERROR sense key will be
inserted only for commands that aren't ATA pass-thru.
Thanks to Ewan Milne for pointing out that this mechanism was present
in usb-storage. 8 years after writing it, I had completely forgotten
its existence.
Signed-off-by: Alan Stern <[email protected]>
Tested-by: Kris Lindgren <[email protected]>
Ref: https://bugzilla.redhat.com/show_bug.cgi?id=1351305
CC: Ewan D. Milne <[email protected]>
CC: <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/usb/storage/transport.c | 14 +++++++++++++-
1 file changed, 13 insertions(+), 1 deletion(-)
diff --git a/drivers/usb/storage/transport.c b/drivers/usb/storage/transport.c
index 02f86dd1a340..90a7bffe3484 100644
--- a/drivers/usb/storage/transport.c
+++ b/drivers/usb/storage/transport.c
@@ -808,12 +808,24 @@ Retry_Sense:
if (result == USB_STOR_TRANSPORT_GOOD) {
srb->result = SAM_STAT_GOOD;
srb->sense_buffer[0] = 0x0;
+ }
+
+ /*
+ * ATA-passthru commands use sense data to report
+ * the command completion status, and often devices
+ * return Check Condition status when nothing is
+ * wrong.
+ */
+ else if (srb->cmnd[0] == ATA_16 ||
+ srb->cmnd[0] == ATA_12) {
+ /* leave the data alone */
+ }
/* If there was a problem, report an unspecified
* hardware error to prevent the higher layers from
* entering an infinite retry loop.
*/
- } else {
+ else {
srb->result = DID_ERROR << 16;
if ((sshdr.response_code & 0x72) == 0x72)
srb->sense_buffer[1] = HARDWARE_ERROR;
--
2.17.1
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 9a78d4fc28904785ffe4c2d361e25b251b479704 ]
The function pcibios_add_device() added by commit d0c31e020057
("sparc/PCI: Fix for panic while enabling SR-IOV") initializes
the dev_archdata by doing a memcpy from the PF. This has the
problem that it erroneously copies the OF device without
explicitly refcounting it.
As David Miller pointed out: "Generally speaking we don't
really support hot-plug for OF probed devices, but if we did
all of the device tree pointers have to be refcounted properly."
To fix this error, and also avoid code duplication, this patch
creates a new helper function, pci_init_dev_archdata(), that
initializes the fields in dev_archdata, and can be invoked
by callers after they have taken the needed refcounts
Signed-off-by: Sowmini Varadhan <[email protected]>
Tested-by: Babu Moger <[email protected]>
Reviewed-by: Khalid Aziz <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/sparc/kernel/pci.c | 29 +++++++++++++++++++++--------
1 file changed, 21 insertions(+), 8 deletions(-)
diff --git a/arch/sparc/kernel/pci.c b/arch/sparc/kernel/pci.c
index 9f9614df9e1e..c2b202d763a1 100644
--- a/arch/sparc/kernel/pci.c
+++ b/arch/sparc/kernel/pci.c
@@ -245,6 +245,18 @@ static void pci_parse_of_addrs(struct platform_device *op,
}
}
+static void pci_init_dev_archdata(struct dev_archdata *sd, void *iommu,
+ void *stc, void *host_controller,
+ struct platform_device *op,
+ int numa_node)
+{
+ sd->iommu = iommu;
+ sd->stc = stc;
+ sd->host_controller = host_controller;
+ sd->op = op;
+ sd->numa_node = numa_node;
+}
+
static struct pci_dev *of_create_pci_dev(struct pci_pbm_info *pbm,
struct device_node *node,
struct pci_bus *bus, int devfn)
@@ -259,13 +271,10 @@ static struct pci_dev *of_create_pci_dev(struct pci_pbm_info *pbm,
if (!dev)
return NULL;
+ op = of_find_device_by_node(node);
sd = &dev->dev.archdata;
- sd->iommu = pbm->iommu;
- sd->stc = &pbm->stc;
- sd->host_controller = pbm;
- sd->op = op = of_find_device_by_node(node);
- sd->numa_node = pbm->numa_node;
-
+ pci_init_dev_archdata(sd, pbm->iommu, &pbm->stc, pbm, op,
+ pbm->numa_node);
sd = &op->dev.archdata;
sd->iommu = pbm->iommu;
sd->stc = &pbm->stc;
@@ -1003,9 +1012,13 @@ int pcibios_add_device(struct pci_dev *dev)
* Copy dev_archdata from PF to VF
*/
if (dev->is_virtfn) {
+ struct dev_archdata *psd;
+
pdev = dev->physfn;
- memcpy(&dev->dev.archdata, &pdev->dev.archdata,
- sizeof(struct dev_archdata));
+ psd = &pdev->dev.archdata;
+ pci_init_dev_archdata(&dev->dev.archdata, psd->iommu,
+ psd->stc, psd->host_controller, NULL,
+ psd->numa_node);
}
return 0;
}
--
2.17.1
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 2b06cdf3e688b98fcc9945873b5d42792bd4eee0 ]
If a socket has a valid dst cache, then xfrm_lookup_route will get
skipped. However, the cache is not invalidated when applying policy to a
socket (i.e. IPV6_XFRM_POLICY). The result is that new policies are
sometimes ignored on those sockets. (Note: This was broken for IPv4 and
IPv6 at different times.)
This can be demonstrated like so,
1. Create UDP socket.
2. connect() the socket.
3. Apply an outbound XFRM policy to the socket. (setsockopt)
4. send() data on the socket.
Packets will continue to be sent in the clear instead of matching an
xfrm or returning a no-match error (EAGAIN). This affects calls to
send() and not sendto().
Invalidating the sk_dst_cache is necessary to correctly apply xfrm
policies. Since we do this in xfrm_user_policy(), the sk_lock was
already acquired in either do_ip_setsockopt() or do_ipv6_setsockopt(),
and we may call __sk_dst_reset().
Performance impact should be negligible, since this code is only called
when changing xfrm policy, and only affects the socket in question.
Fixes: 00bc0ef5880d ("ipv6: Skip XFRM lookup if dst_entry in socket cache is valid")
Tested: https://android-review.googlesource.com/517555
Tested: https://android-review.googlesource.com/418659
Signed-off-by: Jonathan Basseri <[email protected]>
Signed-off-by: Steffen Klassert <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/xfrm/xfrm_state.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/net/xfrm/xfrm_state.c b/net/xfrm/xfrm_state.c
index d6a11af0bab1..9b6e51450fc5 100644
--- a/net/xfrm/xfrm_state.c
+++ b/net/xfrm/xfrm_state.c
@@ -1884,6 +1884,7 @@ int xfrm_user_policy(struct sock *sk, int optname, u8 __user *optval, int optlen
if (err >= 0) {
xfrm_sk_policy_insert(sk, err, pol);
xfrm_pol_put(pol);
+ __sk_dst_reset(sk);
err = 0;
}
--
2.17.1
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit e9ee3238f8a480bbca58e51d02a93628d7c1f265 ]
X550 allows for up to 64 RSS queues, but the driver can have max
of 63 (-1 MSIX vector for link).
On systems with >= 64 CPUs the driver will set the redirection table
for all 64 queues which will result in packets being dropped.
Signed-off-by: Emil Tantilov <[email protected]>
Tested-by: Phil Schmitt <[email protected]>
Signed-off-by: Jeff Kirsher <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/intel/ixgbe/ixgbe.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe.h b/drivers/net/ethernet/intel/ixgbe/ixgbe.h
index 1d2174526a4c..18e4e4a69262 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe.h
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe.h
@@ -312,7 +312,7 @@ enum ixgbe_ring_f_enum {
};
#define IXGBE_MAX_RSS_INDICES 16
-#define IXGBE_MAX_RSS_INDICES_X550 64
+#define IXGBE_MAX_RSS_INDICES_X550 63
#define IXGBE_MAX_VMDQ_INDICES 64
#define IXGBE_MAX_FDIR_INDICES 63 /* based on q_vector limit */
#define IXGBE_MAX_FCOE_INDICES 8
--
2.17.1
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit d636bd9f12a66ea3775c9fabbf3f8e118253467a ]
In join_session_keyring(), if install_session_keyring_to_cred() were to
fail, we would leak the keyring reference, just like in the bug fixed by
commit 23567fd052a9 ("KEYS: Fix keyring ref leak in
join_session_keyring()"). Fortunately this cannot happen currently, but
we really should be more careful. Do this by adding and using a new
error label at which the keyring reference is dropped.
Signed-off-by: Eric Biggers <[email protected]>
Signed-off-by: David Howells <[email protected]>
Signed-off-by: James Morris <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
security/keys/process_keys.c | 7 ++++---
1 file changed, 4 insertions(+), 3 deletions(-)
diff --git a/security/keys/process_keys.c b/security/keys/process_keys.c
index ac1d5b2b1626..a7095372701e 100644
--- a/security/keys/process_keys.c
+++ b/security/keys/process_keys.c
@@ -808,15 +808,14 @@ long join_session_keyring(const char *name)
ret = PTR_ERR(keyring);
goto error2;
} else if (keyring == new->session_keyring) {
- key_put(keyring);
ret = 0;
- goto error2;
+ goto error3;
}
/* we've got a keyring - now to install it */
ret = install_session_keyring_to_cred(new, keyring);
if (ret < 0)
- goto error2;
+ goto error3;
commit_creds(new);
mutex_unlock(&key_session_mutex);
@@ -826,6 +825,8 @@ long join_session_keyring(const char *name)
okay:
return ret;
+error3:
+ key_put(keyring);
error2:
mutex_unlock(&key_session_mutex);
error:
--
2.17.1
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 61c12b49e1c9c77d7a1bcc161de540d0fd21cf0c ]
Commit 8fba54aebbdf ("fuse: direct-io: don't dirty ITER_BVEC pages") fixes
the ITER_BVEC page deadlock for direct io in fuse by checking in
fuse_direct_io(), whether the page is a bvec page or not, before locking
it. However, this check is missed when the "async_dio" mount option is
enabled. In this case, set_page_dirty_lock() is called from the req->end
callback in request_end(), when the fuse thread is returning from userspace
to respond to the read request. This will cause the same deadlock because
the bvec condition is not checked in this path.
Here is the stack of the deadlocked thread, while returning from userspace:
[13706.656686] INFO: task glusterfs:3006 blocked for more than 120 seconds.
[13706.657808] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables
this message.
[13706.658788] glusterfs D ffffffff816c80f0 0 3006 1
0x00000080
[13706.658797] ffff8800d6713a58 0000000000000086 ffff8800d9ad7000
ffff8800d9ad5400
[13706.658799] ffff88011ffd5cc0 ffff8800d6710008 ffff88011fd176c0
7fffffffffffffff
[13706.658801] 0000000000000002 ffffffff816c80f0 ffff8800d6713a78
ffffffff816c790e
[13706.658803] Call Trace:
[13706.658809] [<ffffffff816c80f0>] ? bit_wait_io_timeout+0x80/0x80
[13706.658811] [<ffffffff816c790e>] schedule+0x3e/0x90
[13706.658813] [<ffffffff816ca7e5>] schedule_timeout+0x1b5/0x210
[13706.658816] [<ffffffff81073ffb>] ? gup_pud_range+0x1db/0x1f0
[13706.658817] [<ffffffff810668fe>] ? kvm_clock_read+0x1e/0x20
[13706.658819] [<ffffffff81066909>] ? kvm_clock_get_cycles+0x9/0x10
[13706.658822] [<ffffffff810f5792>] ? ktime_get+0x52/0xc0
[13706.658824] [<ffffffff816c6f04>] io_schedule_timeout+0xa4/0x110
[13706.658826] [<ffffffff816c8126>] bit_wait_io+0x36/0x50
[13706.658828] [<ffffffff816c7d06>] __wait_on_bit_lock+0x76/0xb0
[13706.658831] [<ffffffffa0545636>] ? lock_request+0x46/0x70 [fuse]
[13706.658834] [<ffffffff8118800a>] __lock_page+0xaa/0xb0
[13706.658836] [<ffffffff810c8500>] ? wake_atomic_t_function+0x40/0x40
[13706.658838] [<ffffffff81194d08>] set_page_dirty_lock+0x58/0x60
[13706.658841] [<ffffffffa054d968>] fuse_release_user_pages+0x58/0x70 [fuse]
[13706.658844] [<ffffffffa0551430>] ? fuse_aio_complete+0x190/0x190 [fuse]
[13706.658847] [<ffffffffa0551459>] fuse_aio_complete_req+0x29/0x90 [fuse]
[13706.658849] [<ffffffffa05471e9>] request_end+0xd9/0x190 [fuse]
[13706.658852] [<ffffffffa0549126>] fuse_dev_do_write+0x336/0x490 [fuse]
[13706.658854] [<ffffffffa054963e>] fuse_dev_write+0x6e/0xa0 [fuse]
[13706.658857] [<ffffffff812a9ef3>] ? security_file_permission+0x23/0x90
[13706.658859] [<ffffffff81205300>] do_iter_readv_writev+0x60/0x90
[13706.658862] [<ffffffffa05495d0>] ? fuse_dev_splice_write+0x350/0x350
[fuse]
[13706.658863] [<ffffffff812062a1>] do_readv_writev+0x171/0x1f0
[13706.658866] [<ffffffff810b3d00>] ? try_to_wake_up+0x210/0x210
[13706.658868] [<ffffffff81206361>] vfs_writev+0x41/0x50
[13706.658870] [<ffffffff81206496>] SyS_writev+0x56/0xf0
[13706.658872] [<ffffffff810257a1>] ? syscall_trace_leave+0xf1/0x160
[13706.658874] [<ffffffff816cbb2e>] system_call_fastpath+0x12/0x71
Fix this by making should_dirty a fuse_io_priv parameter that can be
checked in fuse_aio_complete_req().
Reported-by: Tiger Yang <[email protected]>
Signed-off-by: Ashish Samant <[email protected]>
Signed-off-by: Miklos Szeredi <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/fuse/file.c | 6 +++---
fs/fuse/fuse_i.h | 1 +
2 files changed, 4 insertions(+), 3 deletions(-)
diff --git a/fs/fuse/file.c b/fs/fuse/file.c
index 8577f3ba6dc6..7014318f6d18 100644
--- a/fs/fuse/file.c
+++ b/fs/fuse/file.c
@@ -625,7 +625,7 @@ static void fuse_aio_complete_req(struct fuse_conn *fc, struct fuse_req *req)
struct fuse_io_priv *io = req->io;
ssize_t pos = -1;
- fuse_release_user_pages(req, !io->write);
+ fuse_release_user_pages(req, io->should_dirty);
if (io->write) {
if (req->misc.write.in.size != req->misc.write.out.size)
@@ -1333,7 +1333,6 @@ ssize_t fuse_direct_io(struct fuse_io_priv *io, struct iov_iter *iter,
loff_t *ppos, int flags)
{
int write = flags & FUSE_DIO_WRITE;
- bool should_dirty = !write && iter_is_iovec(iter);
int cuse = flags & FUSE_DIO_CUSE;
struct file *file = io->file;
struct inode *inode = file->f_mapping->host;
@@ -1362,6 +1361,7 @@ ssize_t fuse_direct_io(struct fuse_io_priv *io, struct iov_iter *iter,
mutex_unlock(&inode->i_mutex);
}
+ io->should_dirty = !write && iter_is_iovec(iter);
while (count) {
size_t nres;
fl_owner_t owner = current->files;
@@ -1378,7 +1378,7 @@ ssize_t fuse_direct_io(struct fuse_io_priv *io, struct iov_iter *iter,
nres = fuse_send_read(req, io, pos, nbytes, owner);
if (!io->async)
- fuse_release_user_pages(req, should_dirty);
+ fuse_release_user_pages(req, io->should_dirty);
if (req->out.h.error) {
if (!res)
res = req->out.h.error;
diff --git a/fs/fuse/fuse_i.h b/fs/fuse/fuse_i.h
index 7aafe9acc6c0..c6eb35a95fcc 100644
--- a/fs/fuse/fuse_i.h
+++ b/fs/fuse/fuse_i.h
@@ -252,6 +252,7 @@ struct fuse_io_priv {
size_t size;
__u64 offset;
bool write;
+ bool should_dirty;
int err;
struct kiocb *iocb;
struct file *file;
--
2.17.1
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit ab0394fe2c258fdb5086c51a251b28f8ee7ab35c ]
Ethtool LRO enable/disable is broken, as of today we only modify TCP
TIRs in order to apply the requested configuration.
Hardware requires that all TIRs pointing to the same RQ should share the
same LRO configuration. For that all other TIRs' LRO fields must be
modified as well.
Fixes: 5c50368f3831 ('net/mlx5e: Light-weight netdev open/stop')
Signed-off-by: Tariq Toukan <[email protected]>
Signed-off-by: Saeed Mahameed <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/mellanox/mlx5/core/en_main.c | 15 +++++++++++----
1 file changed, 11 insertions(+), 4 deletions(-)
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c
index 90e876ecc720..765b069d6a90 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c
@@ -1304,7 +1304,7 @@ static void mlx5e_build_tir_ctx_lro(void *tirc, struct mlx5e_priv *priv)
lro_timer_supported_periods[2]));
}
-static int mlx5e_modify_tir_lro(struct mlx5e_priv *priv, int tt)
+static int mlx5e_modify_tirs_lro(struct mlx5e_priv *priv)
{
struct mlx5_core_dev *mdev = priv->mdev;
@@ -1312,6 +1312,7 @@ static int mlx5e_modify_tir_lro(struct mlx5e_priv *priv, int tt)
void *tirc;
int inlen;
int err;
+ int tt;
inlen = MLX5_ST_SZ_BYTES(modify_tir_in);
in = mlx5_vzalloc(inlen);
@@ -1323,7 +1324,11 @@ static int mlx5e_modify_tir_lro(struct mlx5e_priv *priv, int tt)
mlx5e_build_tir_ctx_lro(tirc, priv);
- err = mlx5_core_modify_tir(mdev, priv->tirn[tt], in, inlen);
+ for (tt = 0; tt < MLX5E_NUM_TT; tt++) {
+ err = mlx5_core_modify_tir(mdev, priv->tirn[tt], in, inlen);
+ if (err)
+ break;
+ }
kvfree(in);
@@ -1870,8 +1875,10 @@ static int mlx5e_set_features(struct net_device *netdev,
mlx5e_close_locked(priv->netdev);
priv->params.lro_en = !!(features & NETIF_F_LRO);
- mlx5e_modify_tir_lro(priv, MLX5E_TT_IPV4_TCP);
- mlx5e_modify_tir_lro(priv, MLX5E_TT_IPV6_TCP);
+ err = mlx5e_modify_tirs_lro(priv);
+ if (err)
+ mlx5_core_warn(priv->mdev, "lro modify failed, %d\n",
+ err);
if (was_opened)
err = mlx5e_open_locked(priv->netdev);
--
2.17.1
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 2c05d88818ab6571816b93edce4d53703870d7ae ]
In cxgb_extension_ioctl(), the command of the ioctl is firstly copied from
the user-space buffer 'useraddr' to 'cmd' and checked through the
switch statement. If the command is not as expected, an error code
EOPNOTSUPP is returned. In the following execution, i.e., the cases of the
switch statement, the whole buffer of 'useraddr' is copied again to a
specific data structure, according to what kind of command is requested.
However, after the second copy, there is no re-check on the newly-copied
command. Given that the buffer 'useraddr' is in the user space, a malicious
user can race to change the command between the two copies. By doing so,
the attacker can supply malicious data to the kernel and cause undefined
behavior.
This patch adds a re-check in each case of the switch statement if there is
a second copy in that case, to re-check whether the command obtained in the
second copy is the same as the one in the first copy. If not, an error code
EINVAL is returned.
Signed-off-by: Wenwen Wang <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/chelsio/cxgb3/cxgb3_main.c | 17 +++++++++++++++++
1 file changed, 17 insertions(+)
diff --git a/drivers/net/ethernet/chelsio/cxgb3/cxgb3_main.c b/drivers/net/ethernet/chelsio/cxgb3/cxgb3_main.c
index 7ae8374bff13..3dd4c39640dc 100644
--- a/drivers/net/ethernet/chelsio/cxgb3/cxgb3_main.c
+++ b/drivers/net/ethernet/chelsio/cxgb3/cxgb3_main.c
@@ -2147,6 +2147,8 @@ static int cxgb_extension_ioctl(struct net_device *dev, void __user *useraddr)
return -EPERM;
if (copy_from_user(&t, useraddr, sizeof(t)))
return -EFAULT;
+ if (t.cmd != CHELSIO_SET_QSET_PARAMS)
+ return -EINVAL;
if (t.qset_idx >= SGE_QSETS)
return -EINVAL;
if (!in_range(t.intr_lat, 0, M_NEWTIMER) ||
@@ -2246,6 +2248,9 @@ static int cxgb_extension_ioctl(struct net_device *dev, void __user *useraddr)
if (copy_from_user(&t, useraddr, sizeof(t)))
return -EFAULT;
+ if (t.cmd != CHELSIO_GET_QSET_PARAMS)
+ return -EINVAL;
+
/* Display qsets for all ports when offload enabled */
if (test_bit(OFFLOAD_DEVMAP_BIT, &adapter->open_device_map)) {
q1 = 0;
@@ -2291,6 +2296,8 @@ static int cxgb_extension_ioctl(struct net_device *dev, void __user *useraddr)
return -EBUSY;
if (copy_from_user(&edata, useraddr, sizeof(edata)))
return -EFAULT;
+ if (edata.cmd != CHELSIO_SET_QSET_NUM)
+ return -EINVAL;
if (edata.val < 1 ||
(edata.val > 1 && !(adapter->flags & USING_MSIX)))
return -EINVAL;
@@ -2331,6 +2338,8 @@ static int cxgb_extension_ioctl(struct net_device *dev, void __user *useraddr)
return -EPERM;
if (copy_from_user(&t, useraddr, sizeof(t)))
return -EFAULT;
+ if (t.cmd != CHELSIO_LOAD_FW)
+ return -EINVAL;
/* Check t.len sanity ? */
fw_data = memdup_user(useraddr + sizeof(t), t.len);
if (IS_ERR(fw_data))
@@ -2354,6 +2363,8 @@ static int cxgb_extension_ioctl(struct net_device *dev, void __user *useraddr)
return -EBUSY;
if (copy_from_user(&m, useraddr, sizeof(m)))
return -EFAULT;
+ if (m.cmd != CHELSIO_SETMTUTAB)
+ return -EINVAL;
if (m.nmtus != NMTUS)
return -EINVAL;
if (m.mtus[0] < 81) /* accommodate SACK */
@@ -2395,6 +2406,8 @@ static int cxgb_extension_ioctl(struct net_device *dev, void __user *useraddr)
return -EBUSY;
if (copy_from_user(&m, useraddr, sizeof(m)))
return -EFAULT;
+ if (m.cmd != CHELSIO_SET_PM)
+ return -EINVAL;
if (!is_power_of_2(m.rx_pg_sz) ||
!is_power_of_2(m.tx_pg_sz))
return -EINVAL; /* not power of 2 */
@@ -2428,6 +2441,8 @@ static int cxgb_extension_ioctl(struct net_device *dev, void __user *useraddr)
return -EIO; /* need the memory controllers */
if (copy_from_user(&t, useraddr, sizeof(t)))
return -EFAULT;
+ if (t.cmd != CHELSIO_GET_MEM)
+ return -EINVAL;
if ((t.addr & 7) || (t.len & 7))
return -EINVAL;
if (t.mem_id == MEM_CM)
@@ -2480,6 +2495,8 @@ static int cxgb_extension_ioctl(struct net_device *dev, void __user *useraddr)
return -EAGAIN;
if (copy_from_user(&t, useraddr, sizeof(t)))
return -EFAULT;
+ if (t.cmd != CHELSIO_SET_TRACE_FILTER)
+ return -EINVAL;
tp = (const struct trace_params *)&t.sip;
if (t.config_tx)
--
2.17.1
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit f2750df1548bd8a2b060eb609fc43ca82811af4c ]
The driver does not check for Wake-on-LAN modes specified by an user,
but will conditionally set the device as wake-up enabled or not based on
that, which could be a very confusing user experience.
Fixes: 21ff2e8976b1 ("r8152: support WOL")
Signed-off-by: Florian Fainelli <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/usb/r8152.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c
index 2bb336cb13ee..2d83689374bb 100644
--- a/drivers/net/usb/r8152.c
+++ b/drivers/net/usb/r8152.c
@@ -3663,6 +3663,9 @@ static int rtl8152_set_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
if (!rtl_can_wakeup(tp))
return -EOPNOTSUPP;
+ if (wol->wolopts & ~WAKE_ANY)
+ return -EINVAL;
+
ret = usb_autopm_get_interface(tp->intf);
if (ret < 0)
goto out_set_wol;
--
2.17.1
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 6fe1f348b3dd1f700f9630562b7d38afd6949568 ]
When a cgroup's CPU runqueue is destroyed, it should remove its
remaining load accounting from its parent cgroup.
The current site for doing so it unsuited because its far too late and
unordered against other cgroup removal (->css_free() will be, but we're also
in an RCU callback).
Put it in the ->css_offline() callback, which is the start of cgroup
destruction, right after the group has been made unavailable to
userspace. The ->css_offline() callbacks are called in hierarchical order
after the following v4.4 commit:
aa226ff4a1ce ("cgroup: make sure a parent css isn't offlined before its children")
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Cc: Christian Borntraeger <[email protected]>
Cc: Johannes Weiner <[email protected]>
Cc: Li Zefan <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Oleg Nesterov <[email protected]>
Cc: Paul E. McKenney <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Tejun Heo <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Ingo Molnar <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
kernel/sched/core.c | 4 +---
kernel/sched/fair.c | 37 +++++++++++++++++++++----------------
kernel/sched/sched.h | 2 +-
3 files changed, 23 insertions(+), 20 deletions(-)
diff --git a/kernel/sched/core.c b/kernel/sched/core.c
index 65ed3501c2ca..4743e1f2a3d1 100644
--- a/kernel/sched/core.c
+++ b/kernel/sched/core.c
@@ -7817,11 +7817,9 @@ void sched_destroy_group(struct task_group *tg)
void sched_offline_group(struct task_group *tg)
{
unsigned long flags;
- int i;
/* end participation in shares distribution */
- for_each_possible_cpu(i)
- unregister_fair_sched_group(tg, i);
+ unregister_fair_sched_group(tg);
spin_lock_irqsave(&task_group_lock, flags);
list_del_rcu(&tg->list);
diff --git a/kernel/sched/fair.c b/kernel/sched/fair.c
index 3b136fb4422c..a0c5bb93a3ab 100644
--- a/kernel/sched/fair.c
+++ b/kernel/sched/fair.c
@@ -8154,11 +8154,8 @@ void free_fair_sched_group(struct task_group *tg)
for_each_possible_cpu(i) {
if (tg->cfs_rq)
kfree(tg->cfs_rq[i]);
- if (tg->se) {
- if (tg->se[i])
- remove_entity_load_avg(tg->se[i]);
+ if (tg->se)
kfree(tg->se[i]);
- }
}
kfree(tg->cfs_rq);
@@ -8206,21 +8203,29 @@ err:
return 0;
}
-void unregister_fair_sched_group(struct task_group *tg, int cpu)
+void unregister_fair_sched_group(struct task_group *tg)
{
- struct rq *rq = cpu_rq(cpu);
unsigned long flags;
+ struct rq *rq;
+ int cpu;
- /*
- * Only empty task groups can be destroyed; so we can speculatively
- * check on_list without danger of it being re-added.
- */
- if (!tg->cfs_rq[cpu]->on_list)
- return;
+ for_each_possible_cpu(cpu) {
+ if (tg->se[cpu])
+ remove_entity_load_avg(tg->se[cpu]);
- raw_spin_lock_irqsave(&rq->lock, flags);
- list_del_leaf_cfs_rq(tg->cfs_rq[cpu]);
- raw_spin_unlock_irqrestore(&rq->lock, flags);
+ /*
+ * Only empty task groups can be destroyed; so we can speculatively
+ * check on_list without danger of it being re-added.
+ */
+ if (!tg->cfs_rq[cpu]->on_list)
+ continue;
+
+ rq = cpu_rq(cpu);
+
+ raw_spin_lock_irqsave(&rq->lock, flags);
+ list_del_leaf_cfs_rq(tg->cfs_rq[cpu]);
+ raw_spin_unlock_irqrestore(&rq->lock, flags);
+ }
}
void init_tg_cfs_entry(struct task_group *tg, struct cfs_rq *cfs_rq,
@@ -8302,7 +8307,7 @@ int alloc_fair_sched_group(struct task_group *tg, struct task_group *parent)
return 1;
}
-void unregister_fair_sched_group(struct task_group *tg, int cpu) { }
+void unregister_fair_sched_group(struct task_group *tg) { }
#endif /* CONFIG_FAIR_GROUP_SCHED */
diff --git a/kernel/sched/sched.h b/kernel/sched/sched.h
index 0c9ebd82a684..af8d8c3eb8ab 100644
--- a/kernel/sched/sched.h
+++ b/kernel/sched/sched.h
@@ -308,7 +308,7 @@ extern int tg_nop(struct task_group *tg, void *data);
extern void free_fair_sched_group(struct task_group *tg);
extern int alloc_fair_sched_group(struct task_group *tg, struct task_group *parent);
-extern void unregister_fair_sched_group(struct task_group *tg, int cpu);
+extern void unregister_fair_sched_group(struct task_group *tg);
extern void init_tg_cfs_entry(struct task_group *tg, struct cfs_rq *cfs_rq,
struct sched_entity *se, int cpu,
struct sched_entity *parent);
--
2.17.1
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 4d2f1794c07aae55b8f25f4d8aebcafc0d3e501d ]
When the thermal subsystem is a loadable module, the spear driver
fails to build:
drivers/thermal/built-in.o: In function `spear_thermal_exit':
spear_thermal.c:(.text+0xf8): undefined reference to `thermal_zone_device_unregister'
drivers/thermal/built-in.o: In function `spear_thermal_probe':
spear_thermal.c:(.text+0x230): undefined reference to `thermal_zone_device_register'
This changes the symbol to a tristate, so Kconfig can track the
dependency correctly.
Signed-off-by: Arnd Bergmann <[email protected]>
Signed-off-by: Eduardo Valentin <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/thermal/Kconfig | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig
index 4b660b5beb98..b556fa8250fc 100644
--- a/drivers/thermal/Kconfig
+++ b/drivers/thermal/Kconfig
@@ -195,7 +195,7 @@ config IMX_THERMAL
passive trip is crossed.
config SPEAR_THERMAL
- bool "SPEAr thermal sensor driver"
+ tristate "SPEAr thermal sensor driver"
depends on PLAT_SPEAR || COMPILE_TEST
depends on OF
help
--
2.17.1
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit c530c471ba37bdd9fe1c7185b01455c00ae606fb ]
The driver does not check for Wake-on-LAN modes specified by an user,
but will conditionally set the device as wake-up enabled or not based on
that, which could be a very confusing user experience.
Fixes: e0e474a83c18 ("smsc95xx: add wol magic packet support")
Signed-off-by: Florian Fainelli <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/usb/smsc95xx.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/net/usb/smsc95xx.c b/drivers/net/usb/smsc95xx.c
index 66b3ab9f614e..7cee7777d13f 100644
--- a/drivers/net/usb/smsc95xx.c
+++ b/drivers/net/usb/smsc95xx.c
@@ -727,6 +727,9 @@ static int smsc95xx_ethtool_set_wol(struct net_device *net,
struct smsc95xx_priv *pdata = (struct smsc95xx_priv *)(dev->data[0]);
int ret;
+ if (wolinfo->wolopts & ~SUPPORTED_WAKE)
+ return -EINVAL;
+
pdata->wolopts = wolinfo->wolopts & SUPPORTED_WAKE;
ret = device_set_wakeup_enable(&dev->udev->dev, pdata->wolopts);
--
2.17.1
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 5ba6b4aa9a410c5e2c6417df52b5e2118ea9b467 ]
The driver currently silently accepts unsupported Wake-on-LAN modes
(other than WAKE_PHY or WAKE_MAGIC) without reporting that to the user,
which is confusing.
Fixes: e2ca90c276e1 ("ax88179_178a: ASIX AX88179_178A USB 3.0/2.0 to gigabit ethernet adapter driver")
Signed-off-by: Florian Fainelli <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/usb/ax88179_178a.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/net/usb/ax88179_178a.c b/drivers/net/usb/ax88179_178a.c
index e6338c16081a..e3f2e6098db4 100644
--- a/drivers/net/usb/ax88179_178a.c
+++ b/drivers/net/usb/ax88179_178a.c
@@ -566,6 +566,9 @@ ax88179_set_wol(struct net_device *net, struct ethtool_wolinfo *wolinfo)
struct usbnet *dev = netdev_priv(net);
u8 opt = 0;
+ if (wolinfo->wolopts & ~(WAKE_PHY | WAKE_MAGIC))
+ return -EINVAL;
+
if (wolinfo->wolopts & WAKE_PHY)
opt |= AX_MONITOR_MODE_RWLC;
if (wolinfo->wolopts & WAKE_MAGIC)
--
2.17.1
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 4850cf4581578216468b7b3c3d06cc5abb0a697d ]
When doing roundup_pow_of_two for large enough number with
bit 31, an overflow will occur and a value equal to 1 will
be returned. In this case 1 will be subtracted from the return
value and division by zero will be reached.
Fixes: 31c128b66e5b ("net/mlx4_en: Choose time-stamping shift value according to HW frequency")
Signed-off-by: Eugenia Emantayev <[email protected]>
Signed-off-by: Tariq Toukan <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/mellanox/mlx4/en_clock.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/mellanox/mlx4/en_clock.c b/drivers/net/ethernet/mellanox/mlx4/en_clock.c
index 4dccf7287f0f..52e4ed2f639d 100644
--- a/drivers/net/ethernet/mellanox/mlx4/en_clock.c
+++ b/drivers/net/ethernet/mellanox/mlx4/en_clock.c
@@ -251,8 +251,11 @@ static u32 freq_to_shift(u16 freq)
{
u32 freq_khz = freq * 1000;
u64 max_val_cycles = freq_khz * 1000 * MLX4_EN_WRAP_AROUND_SEC;
+ u64 tmp_rounded =
+ roundup_pow_of_two(max_val_cycles) > max_val_cycles ?
+ roundup_pow_of_two(max_val_cycles) - 1 : UINT_MAX;
u64 max_val_cycles_rounded = is_power_of_2(max_val_cycles + 1) ?
- max_val_cycles : roundup_pow_of_two(max_val_cycles) - 1;
+ max_val_cycles : tmp_rounded;
/* calculate max possible multiplier in order to fit in 64bit */
u64 max_mul = div_u64(0xffffffffffffffffULL, max_val_cycles_rounded);
--
2.17.1
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit cd6fb677ce7e460c25bdd66f689734102ec7d642 ]
Some of the scheduling tracepoints allow the perf_tp_event
code to write to ring buffer under different cpu than the
code is running on.
This results in corrupted ring buffer data demonstrated in
following perf commands:
# perf record -e 'sched:sched_switch,sched:sched_wakeup' perf bench sched messaging
# Running 'sched/messaging' benchmark:
# 20 sender and receiver processes per group
# 10 groups == 400 processes run
Total time: 0.383 [sec]
[ perf record: Woken up 8 times to write data ]
0x42b890 [0]: failed to process type: -1765585640
[ perf record: Captured and wrote 4.825 MB perf.data (29669 samples) ]
# perf report --stdio
0x42b890 [0]: failed to process type: -1765585640
The reason for the corruption are some of the scheduling tracepoints,
that have __perf_task dfined and thus allow to store data to another
cpu ring buffer:
sched_waking
sched_wakeup
sched_wakeup_new
sched_stat_wait
sched_stat_sleep
sched_stat_iowait
sched_stat_blocked
The perf_tp_event function first store samples for current cpu
related events defined for tracepoint:
hlist_for_each_entry_rcu(event, head, hlist_entry)
perf_swevent_event(event, count, &data, regs);
And then iterates events of the 'task' and store the sample
for any task's event that passes tracepoint checks:
ctx = rcu_dereference(task->perf_event_ctxp[perf_sw_context]);
list_for_each_entry_rcu(event, &ctx->event_list, event_entry) {
if (event->attr.type != PERF_TYPE_TRACEPOINT)
continue;
if (event->attr.config != entry->type)
continue;
perf_swevent_event(event, count, &data, regs);
}
Above code can race with same code running on another cpu,
ending up with 2 cpus trying to store under the same ring
buffer, which is specifically not allowed.
This patch prevents the problem, by allowing only events with the same
current cpu to receive the event.
NOTE: this requires the use of (per-task-)per-cpu buffers for this
feature to work; perf-record does this.
Signed-off-by: Jiri Olsa <[email protected]>
[peterz: small edits to Changelog]
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Andrew Vagin <[email protected]>
Cc: Arnaldo Carvalho de Melo <[email protected]>
Cc: Arnaldo Carvalho de Melo <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Vince Weaver <[email protected]>
Fixes: e6dab5ffab59 ("perf/trace: Add ability to set a target task for events")
Link: http://lkml.kernel.org/r/20180923161343.GB15054@krava
Signed-off-by: Ingo Molnar <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
kernel/events/core.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/kernel/events/core.c b/kernel/events/core.c
index 990ac41d8a5f..330fcd1b1822 100644
--- a/kernel/events/core.c
+++ b/kernel/events/core.c
@@ -7018,6 +7018,8 @@ void perf_tp_event(u64 addr, u64 count, void *record, int entry_size,
goto unlock;
list_for_each_entry_rcu(event, &ctx->event_list, event_entry) {
+ if (event->cpu != smp_processor_id())
+ continue;
if (event->attr.type != PERF_TYPE_TRACEPOINT)
continue;
if (event->attr.config != entry->type)
--
2.17.1
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit c15c0ab12fd62f2b19181d05c62d24bc9fa55a42 ]
Pass the correct type __wsum to csum_sub() and csum_add(). This doesn't
really change anything since __wsum really *is* __be32, but removes the
address space warnings from sparse.
Cc: Eric Dumazet <[email protected]>
Fixes: 34ae6a1aa054 ("ipv6: update skb->csum when CE mark is propagated")
Signed-off-by: Johannes Berg <[email protected]>
Acked-by: Eric Dumazet <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
include/net/inet_ecn.h | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/include/net/inet_ecn.h b/include/net/inet_ecn.h
index 0dc0a51da38f..dce2d586d9ce 100644
--- a/include/net/inet_ecn.h
+++ b/include/net/inet_ecn.h
@@ -128,7 +128,8 @@ static inline int IP6_ECN_set_ce(struct sk_buff *skb, struct ipv6hdr *iph)
to = from | htonl(INET_ECN_CE << 20);
*(__be32 *)iph = to;
if (skb->ip_summed == CHECKSUM_COMPLETE)
- skb->csum = csum_add(csum_sub(skb->csum, from), to);
+ skb->csum = csum_add(csum_sub(skb->csum, (__force __wsum)from),
+ (__force __wsum)to);
return 1;
}
--
2.17.1
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit bb4add2ce991e4ec891b5a0287fd1ab77b631979 ]
This patch adds new ports-implemented mask, which is required to get
achi working on the mainline. Without this patch value read from
PORTS_IMPL register which is zero would not enable any ports for
software to use.
Fixes: 566d1827df2e ("libata: disable forced PORTS_IMPL for >= AHCI 1.3")
Cc: [email protected] # v4.5+
Signed-off-by: Srinivas Kandagatla <[email protected]>
Reviewed-by: Andy Gross <[email protected]>
Signed-off-by: Tejun Heo <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm/boot/dts/qcom-apq8064.dtsi | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi
index e00d50ef678f..3ff5ea16ebb3 100644
--- a/arch/arm/boot/dts/qcom-apq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-apq8064.dtsi
@@ -577,7 +577,7 @@
};
sata0: sata@29000000 {
- compatible = "generic-ahci";
+ compatible = "qcom,apq8064-ahci", "generic-ahci";
status = "disabled";
reg = <0x29000000 0x180>;
interrupts = <GIC_SPI 209 IRQ_TYPE_NONE>;
@@ -599,6 +599,7 @@
phys = <&sata_phy0>;
phy-names = "sata-phy";
+ ports-implemented = <0x1>;
};
/* Temporary fixed regulator */
--
2.17.1
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 3575dbf2cbbc8e598f17ec441aed526dbea0e1bd ]
Remove a write-only stack variable from unix_attach_fds(). This is a
left-over from the security fix in:
commit 712f4aad406bb1ed67f3f98d04c044191f0ff593
Author: willy tarreau <[email protected]>
Date: Sun Jan 10 07:54:56 2016 +0100
unix: properly account for FDs passed over unix sockets
Signed-off-by: David Herrmann <[email protected]>
Acked-by: Hannes Frederic Sowa <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/unix/af_unix.c | 5 +----
1 file changed, 1 insertion(+), 4 deletions(-)
diff --git a/net/unix/af_unix.c b/net/unix/af_unix.c
index e05ec54ac53f..c6b1eec94911 100644
--- a/net/unix/af_unix.c
+++ b/net/unix/af_unix.c
@@ -1531,7 +1531,6 @@ static int unix_attach_fds(struct scm_cookie *scm, struct sk_buff *skb)
{
int i;
unsigned char max_level = 0;
- int unix_sock_count = 0;
if (too_many_unix_fds(current))
return -ETOOMANYREFS;
@@ -1539,11 +1538,9 @@ static int unix_attach_fds(struct scm_cookie *scm, struct sk_buff *skb)
for (i = scm->fp->count - 1; i >= 0; i--) {
struct sock *sk = unix_get_socket(scm->fp->fp[i]);
- if (sk) {
- unix_sock_count++;
+ if (sk)
max_level = max(max_level,
unix_sk(sk)->recursion_level);
- }
}
if (unlikely(max_level > MAX_RECURSION_LEVEL))
return -ETOOMANYREFS;
--
2.17.1
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit c5cb93e994ffb43b7b3b1ff10b9f928f54574a36 ]
The driver currently silently accepts unsupported Wake-on-LAN modes
(other than WAKE_PHY or WAKE_MAGIC) without reporting that to the user,
which is confusing.
Fixes: 19a38d8e0aa3 ("USB2NET : SR9800 : One chip USB2.0 USB2NET SR9800 Device Driver Support")
Signed-off-by: Florian Fainelli <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/usb/sr9800.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/net/usb/sr9800.c b/drivers/net/usb/sr9800.c
index a50df0d8fb9a..004c955c1fd1 100644
--- a/drivers/net/usb/sr9800.c
+++ b/drivers/net/usb/sr9800.c
@@ -421,6 +421,9 @@ sr_set_wol(struct net_device *net, struct ethtool_wolinfo *wolinfo)
struct usbnet *dev = netdev_priv(net);
u8 opt = 0;
+ if (wolinfo->wolopts & ~(WAKE_PHY | WAKE_MAGIC))
+ return -EINVAL;
+
if (wolinfo->wolopts & WAKE_PHY)
opt |= SR_MONITOR_LINK;
if (wolinfo->wolopts & WAKE_MAGIC)
--
2.17.1
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit f44f1e7da7c8e3f4575d5d61c4df978496903fcc ]
Building a statically linked UML kernel on a Centos 6.9 host resulted in
the following linking failure (GCC 4.4, glibc-2.12):
/usr/lib/gcc/x86_64-redhat-linux/4.4.7/../../../../lib64/libpthread.a(libpthread.o):
In function `siglongjmp':
(.text+0x8490): multiple definition of `longjmp'
arch/x86/um/built-in.o:/local/users/fainelli/openwrt/trunk/build_dir/target-x86_64_musl/linux-uml/linux-4.4.69/arch/x86/um/setjmp_64.S:44:
first defined here
/usr/lib/gcc/x86_64-redhat-linux/4.4.7/../../../../lib64/libpthread.a(libpthread.o):
In function `sem_open':
(.text+0x77cd): warning: the use of `mktemp' is dangerous, better use
`mkstemp'
collect2: ld returned 1 exit status
make[4]: *** [vmlinux] Error 1
Adopt a solution similar to the one done for vmap where we define
longjmp/setjmp to be kernel_longjmp/setjmp. In the process, make sure we
do rename the functions in arch/x86/um/setjmp_*.S accordingly.
Fixes: a7df4716d195 ("um: link with -lpthread")
Signed-off-by: Florian Fainelli <[email protected]>
Signed-off-by: Richard Weinberger <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/um/Makefile | 4 ++++
arch/x86/um/setjmp_32.S | 16 ++++++++--------
arch/x86/um/setjmp_64.S | 16 ++++++++--------
3 files changed, 20 insertions(+), 16 deletions(-)
diff --git a/arch/um/Makefile b/arch/um/Makefile
index 9ccf462131c4..d9cd7ed27834 100644
--- a/arch/um/Makefile
+++ b/arch/um/Makefile
@@ -59,10 +59,14 @@ KBUILD_CPPFLAGS += -I$(srctree)/$(HOST_DIR)/um
# Same things for in6addr_loopback and mktime - found in libc. For these two we
# only get link-time error, luckily.
#
+# -Dlongjmp=kernel_longjmp prevents anything from referencing the libpthread.a
+# embedded copy of longjmp, same thing for setjmp.
+#
# These apply to USER_CFLAGS to.
KBUILD_CFLAGS += $(CFLAGS) $(CFLAGS-y) -D__arch_um__ \
$(ARCH_INCLUDE) $(MODE_INCLUDE) -Dvmap=kernel_vmap \
+ -Dlongjmp=kernel_longjmp -Dsetjmp=kernel_setjmp \
-Din6addr_loopback=kernel_in6addr_loopback \
-Din6addr_any=kernel_in6addr_any -Dstrrchr=kernel_strrchr
diff --git a/arch/x86/um/setjmp_32.S b/arch/x86/um/setjmp_32.S
index b766792c9933..39053192918d 100644
--- a/arch/x86/um/setjmp_32.S
+++ b/arch/x86/um/setjmp_32.S
@@ -16,9 +16,9 @@
.text
.align 4
- .globl setjmp
- .type setjmp, @function
-setjmp:
+ .globl kernel_setjmp
+ .type kernel_setjmp, @function
+kernel_setjmp:
#ifdef _REGPARM
movl %eax,%edx
#else
@@ -35,13 +35,13 @@ setjmp:
movl %ecx,20(%edx) # Return address
ret
- .size setjmp,.-setjmp
+ .size kernel_setjmp,.-kernel_setjmp
.text
.align 4
- .globl longjmp
- .type longjmp, @function
-longjmp:
+ .globl kernel_longjmp
+ .type kernel_longjmp, @function
+kernel_longjmp:
#ifdef _REGPARM
xchgl %eax,%edx
#else
@@ -55,4 +55,4 @@ longjmp:
movl 16(%edx),%edi
jmp *20(%edx)
- .size longjmp,.-longjmp
+ .size kernel_longjmp,.-kernel_longjmp
diff --git a/arch/x86/um/setjmp_64.S b/arch/x86/um/setjmp_64.S
index 45f547b4043e..c56942e1a38c 100644
--- a/arch/x86/um/setjmp_64.S
+++ b/arch/x86/um/setjmp_64.S
@@ -18,9 +18,9 @@
.text
.align 4
- .globl setjmp
- .type setjmp, @function
-setjmp:
+ .globl kernel_setjmp
+ .type kernel_setjmp, @function
+kernel_setjmp:
pop %rsi # Return address, and adjust the stack
xorl %eax,%eax # Return value
movq %rbx,(%rdi)
@@ -34,13 +34,13 @@ setjmp:
movq %rsi,56(%rdi) # Return address
ret
- .size setjmp,.-setjmp
+ .size kernel_setjmp,.-kernel_setjmp
.text
.align 4
- .globl longjmp
- .type longjmp, @function
-longjmp:
+ .globl kernel_longjmp
+ .type kernel_longjmp, @function
+kernel_longjmp:
movl %esi,%eax # Return value (int)
movq (%rdi),%rbx
movq 8(%rdi),%rsp
@@ -51,4 +51,4 @@ longjmp:
movq 48(%rdi),%r15
jmp *56(%rdi)
- .size longjmp,.-longjmp
+ .size kernel_longjmp,.-kernel_longjmp
--
2.17.1
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 35bbb97fc898aeb874cb7c8b746f091caa359994 ]
commit 909c3a22da3 (Btrfs: fix loading of orphan roots leading to BUG_ON)
avoids the BUG_ON but can add an aliased root to the dead_roots list or
leak the root.
Since we've already been loading roots into the radix tree, we should
use it before looking the root up on disk.
Cc: <[email protected]> # 4.5
Signed-off-by: Jeff Mahoney <[email protected]>
Reviewed-by: David Sterba <[email protected]>
Signed-off-by: David Sterba <[email protected]>
Signed-off-by: Chris Mason <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/btrfs/disk-io.c | 4 ++--
fs/btrfs/disk-io.h | 2 ++
fs/btrfs/root-tree.c | 27 ++++++++++++++++++---------
3 files changed, 22 insertions(+), 11 deletions(-)
diff --git a/fs/btrfs/disk-io.c b/fs/btrfs/disk-io.c
index a2001abbe379..120363d0f981 100644
--- a/fs/btrfs/disk-io.c
+++ b/fs/btrfs/disk-io.c
@@ -1608,8 +1608,8 @@ fail:
return ret;
}
-static struct btrfs_root *btrfs_lookup_fs_root(struct btrfs_fs_info *fs_info,
- u64 root_id)
+struct btrfs_root *btrfs_lookup_fs_root(struct btrfs_fs_info *fs_info,
+ u64 root_id)
{
struct btrfs_root *root;
diff --git a/fs/btrfs/disk-io.h b/fs/btrfs/disk-io.h
index adeb31830b9c..3c9819403487 100644
--- a/fs/btrfs/disk-io.h
+++ b/fs/btrfs/disk-io.h
@@ -68,6 +68,8 @@ struct extent_buffer *btrfs_find_tree_block(struct btrfs_fs_info *fs_info,
struct btrfs_root *btrfs_read_fs_root(struct btrfs_root *tree_root,
struct btrfs_key *location);
int btrfs_init_fs_root(struct btrfs_root *root);
+struct btrfs_root *btrfs_lookup_fs_root(struct btrfs_fs_info *fs_info,
+ u64 root_id);
int btrfs_insert_fs_root(struct btrfs_fs_info *fs_info,
struct btrfs_root *root);
void btrfs_free_fs_roots(struct btrfs_fs_info *fs_info);
diff --git a/fs/btrfs/root-tree.c b/fs/btrfs/root-tree.c
index 2c849b08a91b..6a6efb26d52f 100644
--- a/fs/btrfs/root-tree.c
+++ b/fs/btrfs/root-tree.c
@@ -272,6 +272,23 @@ int btrfs_find_orphan_roots(struct btrfs_root *tree_root)
root_key.objectid = key.offset;
key.offset++;
+ /*
+ * The root might have been inserted already, as before we look
+ * for orphan roots, log replay might have happened, which
+ * triggers a transaction commit and qgroup accounting, which
+ * in turn reads and inserts fs roots while doing backref
+ * walking.
+ */
+ root = btrfs_lookup_fs_root(tree_root->fs_info,
+ root_key.objectid);
+ if (root) {
+ WARN_ON(!test_bit(BTRFS_ROOT_ORPHAN_ITEM_INSERTED,
+ &root->state));
+ if (btrfs_root_refs(&root->root_item) == 0)
+ btrfs_add_dead_root(root);
+ continue;
+ }
+
root = btrfs_read_fs_root(tree_root, &root_key);
err = PTR_ERR_OR_ZERO(root);
if (err && err != -ENOENT) {
@@ -310,16 +327,8 @@ int btrfs_find_orphan_roots(struct btrfs_root *tree_root)
set_bit(BTRFS_ROOT_ORPHAN_ITEM_INSERTED, &root->state);
err = btrfs_insert_fs_root(root->fs_info, root);
- /*
- * The root might have been inserted already, as before we look
- * for orphan roots, log replay might have happened, which
- * triggers a transaction commit and qgroup accounting, which
- * in turn reads and inserts fs roots while doing backref
- * walking.
- */
- if (err == -EEXIST)
- err = 0;
if (err) {
+ BUG_ON(err == -EEXIST);
btrfs_free_fs_root(root);
break;
}
--
2.17.1
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 28ef8b49a338dc1844e86b7954cfffc7dfa2660a ]
The allocation of hwsim radio identifiers uses a post-increment from 0,
so the first radio has idx 0. This idx is explicitly excluded from
multicast announcements ever since, but it is unclear why.
Drop that idx check and announce the first radio as well. This makes
userspace happy if it relies on these events.
Signed-off-by: Martin Willi <[email protected]>
Signed-off-by: Johannes Berg <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/mac80211_hwsim.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/drivers/net/wireless/mac80211_hwsim.c b/drivers/net/wireless/mac80211_hwsim.c
index c98cb962b454..05413176a5d6 100644
--- a/drivers/net/wireless/mac80211_hwsim.c
+++ b/drivers/net/wireless/mac80211_hwsim.c
@@ -2547,8 +2547,7 @@ static int mac80211_hwsim_new_radio(struct genl_info *info,
list_add_tail(&data->list, &hwsim_radios);
spin_unlock_bh(&hwsim_radio_lock);
- if (idx > 0)
- hwsim_mcast_new_radio(idx, info, param);
+ hwsim_mcast_new_radio(idx, info, param);
return idx;
--
2.17.1
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 24f33e64fcd0d50a4b1a8e5b41bd0257aa66b0e8 ]
Core regulatory hints didn't set wiphy_idx to WIPHY_IDX_INVALID. Since
the regulatory request is zeroed, wiphy_idx was always implicitly set to
0. This resulted in updating only phy #0.
Fix that.
Fixes: 806a9e39670b ("cfg80211: make regulatory_request use wiphy_idx instead of wiphy")
Signed-off-by: Andrei Otcheretianski <[email protected]>
Signed-off-by: Luca Coelho <[email protected]>
[add fixes tag]
Signed-off-by: Johannes Berg <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/wireless/reg.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/net/wireless/reg.c b/net/wireless/reg.c
index 06d050da0d94..50dffd183cc6 100644
--- a/net/wireless/reg.c
+++ b/net/wireless/reg.c
@@ -2367,6 +2367,7 @@ static int regulatory_hint_core(const char *alpha2)
request->alpha2[0] = alpha2[0];
request->alpha2[1] = alpha2[1];
request->initiator = NL80211_REGDOM_SET_BY_CORE;
+ request->wiphy_idx = WIPHY_IDX_INVALID;
queue_regulatory_request(request);
--
2.17.1
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 3cb9185c67304b2a7ea9be73e7d13df6fb2793a1 ]
radix_tree_iter_retry() resets slot to NULL, but it doesn't reset tags.
Then NULL slot and non-zero iter.tags passed to radix_tree_next_slot()
leading to crash:
RIP: radix_tree_next_slot include/linux/radix-tree.h:473
find_get_pages_tag+0x334/0x930 mm/filemap.c:1452
....
Call Trace:
pagevec_lookup_tag+0x3a/0x80 mm/swap.c:960
mpage_prepare_extent_to_map+0x321/0xa90 fs/ext4/inode.c:2516
ext4_writepages+0x10be/0x2b20 fs/ext4/inode.c:2736
do_writepages+0x97/0x100 mm/page-writeback.c:2364
__filemap_fdatawrite_range+0x248/0x2e0 mm/filemap.c:300
filemap_write_and_wait_range+0x121/0x1b0 mm/filemap.c:490
ext4_sync_file+0x34d/0xdb0 fs/ext4/fsync.c:115
vfs_fsync_range+0x10a/0x250 fs/sync.c:195
vfs_fsync fs/sync.c:209
do_fsync+0x42/0x70 fs/sync.c:219
SYSC_fdatasync fs/sync.c:232
SyS_fdatasync+0x19/0x20 fs/sync.c:230
entry_SYSCALL_64_fastpath+0x23/0xc1 arch/x86/entry/entry_64.S:207
We must reset iterator's tags to bail out from radix_tree_next_slot()
and go to the slow-path in radix_tree_next_chunk().
Fixes: 46437f9a554f ("radix-tree: fix race in gang lookup")
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Andrey Ryabinin <[email protected]>
Reported-by: Dmitry Vyukov <[email protected]>
Acked-by: Konstantin Khlebnikov <[email protected]>
Cc: Matthew Wilcox <[email protected]>
Cc: Hugh Dickins <[email protected]>
Cc: Ross Zwisler <[email protected]>
Cc: <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
include/linux/radix-tree.h | 1 +
1 file changed, 1 insertion(+)
diff --git a/include/linux/radix-tree.h b/include/linux/radix-tree.h
index 5d5174b59802..673dee29a9b9 100644
--- a/include/linux/radix-tree.h
+++ b/include/linux/radix-tree.h
@@ -382,6 +382,7 @@ static inline __must_check
void **radix_tree_iter_retry(struct radix_tree_iter *iter)
{
iter->next_index = iter->index;
+ iter->tags = 0;
return NULL;
}
--
2.17.1
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 07bf7908950a8b14e81aa1807e3c667eab39287a ]
We don't validate the address prefix lengths in the xfrm
selector we got from userspace. This can lead to undefined
behaviour in the address matching functions if the prefix
is too big for the given address family. Fix this by checking
the prefixes and refuse SA/policy insertation when a prefix
is invalid.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-by: Air Icy <[email protected]>
Signed-off-by: Steffen Klassert <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/xfrm/xfrm_user.c | 12 ++++++++++++
1 file changed, 12 insertions(+)
diff --git a/net/xfrm/xfrm_user.c b/net/xfrm/xfrm_user.c
index a9b4491a3cc4..c2e98dcba9fe 100644
--- a/net/xfrm/xfrm_user.c
+++ b/net/xfrm/xfrm_user.c
@@ -151,10 +151,16 @@ static int verify_newsa_info(struct xfrm_usersa_info *p,
err = -EINVAL;
switch (p->family) {
case AF_INET:
+ if (p->sel.prefixlen_d > 32 || p->sel.prefixlen_s > 32)
+ goto out;
+
break;
case AF_INET6:
#if IS_ENABLED(CONFIG_IPV6)
+ if (p->sel.prefixlen_d > 128 || p->sel.prefixlen_s > 128)
+ goto out;
+
break;
#else
err = -EAFNOSUPPORT;
@@ -1312,10 +1318,16 @@ static int verify_newpolicy_info(struct xfrm_userpolicy_info *p)
switch (p->sel.family) {
case AF_INET:
+ if (p->sel.prefixlen_d > 32 || p->sel.prefixlen_s > 32)
+ return -EINVAL;
+
break;
case AF_INET6:
#if IS_ENABLED(CONFIG_IPV6)
+ if (p->sel.prefixlen_d > 128 || p->sel.prefixlen_s > 128)
+ return -EINVAL;
+
break;
#else
return -EAFNOSUPPORT;
--
2.17.1
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit eb9ad088f96653a26b340f7c447c44cf023d5cdc ]
The driver supports a fair amount of Wake-on-LAN modes, but is not
checking that the user specified one that is supported.
Fixes: 55d7de9de6c3 ("Microchip's LAN7800 family USB 2/3 to 10/100/1000 Ethernet device driver")
Signed-off-by: Florian Fainelli <[email protected]>
Reviewed-by: Woojung Huh <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/usb/lan78xx.c | 17 ++++-------------
1 file changed, 4 insertions(+), 13 deletions(-)
diff --git a/drivers/net/usb/lan78xx.c b/drivers/net/usb/lan78xx.c
index 1aede726052c..45a6a7cae4bf 100644
--- a/drivers/net/usb/lan78xx.c
+++ b/drivers/net/usb/lan78xx.c
@@ -1051,19 +1051,10 @@ static int lan78xx_set_wol(struct net_device *netdev,
if (ret < 0)
return ret;
- pdata->wol = 0;
- if (wol->wolopts & WAKE_UCAST)
- pdata->wol |= WAKE_UCAST;
- if (wol->wolopts & WAKE_MCAST)
- pdata->wol |= WAKE_MCAST;
- if (wol->wolopts & WAKE_BCAST)
- pdata->wol |= WAKE_BCAST;
- if (wol->wolopts & WAKE_MAGIC)
- pdata->wol |= WAKE_MAGIC;
- if (wol->wolopts & WAKE_PHY)
- pdata->wol |= WAKE_PHY;
- if (wol->wolopts & WAKE_ARP)
- pdata->wol |= WAKE_ARP;
+ if (wol->wolopts & ~WAKE_ALL)
+ return -EINVAL;
+
+ pdata->wol = wol->wolopts;
device_set_wakeup_enable(&dev->udev->dev, (bool)wol->wolopts);
--
2.17.1
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 8d2c3ab4445640957d136caa3629857d63544a2a ]
The purpose of gigaset_device_release() is to kfree() the struct
ser_cardstate that contains our struct device. This is done via a bit of
a detour. First we make our struct device's driver_data point to the
container of our struct ser_cardstate (which is a struct cardstate). In
gigaset_device_release() we then retrieve that driver_data again. And
after that we finally kfree() the struct ser_cardstate that was saved in
the struct cardstate.
All of this can be achieved much easier by using container_of() to get
from our struct device to its container, struct ser_cardstate. Do so.
Note that at the time the detour was implemented commit b8b2c7d845d5
("base/platform: assert that dev_pm_domain callbacks are called
unconditionally") had just entered the tree. That commit disconnected
our platform_device and our platform_driver. These were reconnected
again in v4.5-rc2 through commit 25cad69f21f5 ("base/platform: Fix
platform drivers with no probe callback"). And one of the consequences
of that fix was that it broke the detour via driver_data. That's because
it made __device_release_driver() stop being a NOP for our struct device
and actually do stuff again. One of the things it now does, is setting
our driver_data to NULL. That, in turn, makes it impossible for
gigaset_device_release() to get to our struct cardstate. Which has the
net effect of leaking a struct ser_cardstate at every call of this
driver's tty close() operation. So using container_of() has the
additional benefit of actually working.
Reported-by: Dmitry Vyukov <[email protected]>
Tested-by: Dmitry Vyukov <[email protected]>
Signed-off-by: Paul Bolle <[email protected]>
Acked-by: Tilman Schmidt <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/isdn/gigaset/ser-gigaset.c | 9 +--------
1 file changed, 1 insertion(+), 8 deletions(-)
diff --git a/drivers/isdn/gigaset/ser-gigaset.c b/drivers/isdn/gigaset/ser-gigaset.c
index 74bf1a17ae7c..b90776ef56ec 100644
--- a/drivers/isdn/gigaset/ser-gigaset.c
+++ b/drivers/isdn/gigaset/ser-gigaset.c
@@ -373,13 +373,7 @@ static void gigaset_freecshw(struct cardstate *cs)
static void gigaset_device_release(struct device *dev)
{
- struct cardstate *cs = dev_get_drvdata(dev);
-
- if (!cs)
- return;
- dev_set_drvdata(dev, NULL);
- kfree(cs->hw.ser);
- cs->hw.ser = NULL;
+ kfree(container_of(dev, struct ser_cardstate, dev.dev));
}
/*
@@ -408,7 +402,6 @@ static int gigaset_initcshw(struct cardstate *cs)
cs->hw.ser = NULL;
return rc;
}
- dev_set_drvdata(&cs->hw.ser->dev.dev, cs);
tasklet_init(&cs->write_tasklet,
gigaset_modem_fill, (unsigned long) cs);
--
2.17.1
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit cb28c306b93b71f2741ce1a5a66289db26715f4d ]
In case unpair_device() was called through mgmt interface at the same time
when pairing was in progress, Bluetooth kernel module crash was seen.
[ 600.351225] general protection fault: 0000 [#1] SMP PTI
[ 600.351235] CPU: 1 PID: 11096 Comm: btmgmt Tainted: G OE 4.19.0-rc1+ #1
[ 600.351238] Hardware name: Dell Inc. Latitude E5440/08RCYC, BIOS A18 05/14/2017
[ 600.351272] RIP: 0010:smp_chan_destroy.isra.10+0xce/0x2c0 [bluetooth]
[ 600.351276] Code: c0 0f 84 b4 01 00 00 80 78 28 04 0f 84 53 01 00 00 4d 85 ed 0f 85 ab 00 00 00 48 8b 08 48 8b 50 08 be 10 00 00 00 48 89 51 08 <48> 89 0a 48 b9 00 02 00 00 00 00 ad de 48 89 48 08 48 8b 83 00 01
[ 600.351279] RSP: 0018:ffffa9be839b3b50 EFLAGS: 00010246
[ 600.351282] RAX: ffff9c999ac565a0 RBX: ffff9c9996e98c00 RCX: ffff9c999aa28b60
[ 600.351285] RDX: dead000000000200 RSI: 0000000000000010 RDI: ffff9c999e403500
[ 600.351287] RBP: ffffa9be839b3b70 R08: 0000000000000000 R09: ffffffff92a25c00
[ 600.351290] R10: ffffa9be839b3ae8 R11: 0000000000000001 R12: ffff9c995375b800
[ 600.351292] R13: 0000000000000000 R14: ffff9c99619a5000 R15: ffff9c9962a01c00
[ 600.351295] FS: 00007fb2be27c700(0000) GS:ffff9c999e880000(0000) knlGS:0000000000000000
[ 600.351298] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 600.351300] CR2: 00007fb2bdadbad0 CR3: 000000041c328001 CR4: 00000000001606e0
[ 600.351302] Call Trace:
[ 600.351325] smp_failure+0x4f/0x70 [bluetooth]
[ 600.351345] smp_cancel_pairing+0x74/0x80 [bluetooth]
[ 600.351370] unpair_device+0x1c1/0x330 [bluetooth]
[ 600.351399] hci_sock_sendmsg+0x960/0x9f0 [bluetooth]
[ 600.351409] ? apparmor_socket_sendmsg+0x1e/0x20
[ 600.351417] sock_sendmsg+0x3e/0x50
[ 600.351422] sock_write_iter+0x85/0xf0
[ 600.351429] do_iter_readv_writev+0x12b/0x1b0
[ 600.351434] do_iter_write+0x87/0x1a0
[ 600.351439] vfs_writev+0x98/0x110
[ 600.351443] ? ep_poll+0x16d/0x3d0
[ 600.351447] ? ep_modify+0x73/0x170
[ 600.351451] do_writev+0x61/0xf0
[ 600.351455] ? do_writev+0x61/0xf0
[ 600.351460] __x64_sys_writev+0x1c/0x20
[ 600.351465] do_syscall_64+0x5a/0x110
[ 600.351471] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[ 600.351474] RIP: 0033:0x7fb2bdb62fe0
[ 600.351477] Code: 73 01 c3 48 8b 0d b8 6e 2c 00 f7 d8 64 89 01 48 83 c8 ff c3 66 0f 1f 44 00 00 83 3d 69 c7 2c 00 00 75 10 b8 14 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 31 c3 48 83 ec 08 e8 de 80 01 00 48 89 04 24
[ 600.351479] RSP: 002b:00007ffe062cb8f8 EFLAGS: 00000246 ORIG_RAX: 0000000000000014
[ 600.351484] RAX: ffffffffffffffda RBX: 000000000255b3d0 RCX: 00007fb2bdb62fe0
[ 600.351487] RDX: 0000000000000001 RSI: 00007ffe062cb920 RDI: 0000000000000004
[ 600.351490] RBP: 00007ffe062cb920 R08: 000000000255bd80 R09: 0000000000000000
[ 600.351494] R10: 0000000000000353 R11: 0000000000000246 R12: 0000000000000001
[ 600.351497] R13: 00007ffe062cbbe0 R14: 0000000000000000 R15: 0000000000000000
[ 600.351501] Modules linked in: algif_hash algif_skcipher af_alg cmac ipt_MASQUERADE nf_conntrack_netlink nfnetlink xfrm_user xfrm_algo iptable_nat nf_nat_ipv4 xt_addrtype iptable_filter ip_tables xt_conntrack x_tables nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 libcrc32c br_netfilter bridge stp llc overlay arc4 nls_iso8859_1 dm_crypt intel_rapl x86_pkg_temp_thermal intel_powerclamp coretemp dell_laptop kvm_intel crct10dif_pclmul dell_smm_hwmon crc32_pclmul ghash_clmulni_intel pcbc aesni_intel aes_x86_64 crypto_simd cryptd glue_helper intel_cstate intel_rapl_perf uvcvideo videobuf2_vmalloc videobuf2_memops videobuf2_v4l2 videobuf2_common videodev media hid_multitouch input_leds joydev serio_raw dell_wmi snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic dell_smbios dcdbas sparse_keymap
[ 600.351569] snd_hda_intel btusb snd_hda_codec btrtl btbcm btintel snd_hda_core bluetooth(OE) snd_hwdep snd_pcm iwlmvm ecdh_generic wmi_bmof dell_wmi_descriptor snd_seq_midi mac80211 snd_seq_midi_event lpc_ich iwlwifi snd_rawmidi snd_seq snd_seq_device snd_timer cfg80211 snd soundcore mei_me mei dell_rbtn dell_smo8800 mac_hid parport_pc ppdev lp parport autofs4 hid_generic usbhid hid i915 nouveau kvmgt vfio_mdev mdev vfio_iommu_type1 vfio kvm irqbypass i2c_algo_bit ttm drm_kms_helper syscopyarea sysfillrect sysimgblt mxm_wmi psmouse ahci sdhci_pci cqhci libahci fb_sys_fops sdhci drm e1000e video wmi
[ 600.351637] ---[ end trace e49e9f1df09c94fb ]---
[ 600.351664] RIP: 0010:smp_chan_destroy.isra.10+0xce/0x2c0 [bluetooth]
[ 600.351666] Code: c0 0f 84 b4 01 00 00 80 78 28 04 0f 84 53 01 00 00 4d 85 ed 0f 85 ab 00 00 00 48 8b 08 48 8b 50 08 be 10 00 00 00 48 89 51 08 <48> 89 0a 48 b9 00 02 00 00 00 00 ad de 48 89 48 08 48 8b 83 00 01
[ 600.351669] RSP: 0018:ffffa9be839b3b50 EFLAGS: 00010246
[ 600.351672] RAX: ffff9c999ac565a0 RBX: ffff9c9996e98c00 RCX: ffff9c999aa28b60
[ 600.351674] RDX: dead000000000200 RSI: 0000000000000010 RDI: ffff9c999e403500
[ 600.351676] RBP: ffffa9be839b3b70 R08: 0000000000000000 R09: ffffffff92a25c00
[ 600.351679] R10: ffffa9be839b3ae8 R11: 0000000000000001 R12: ffff9c995375b800
[ 600.351681] R13: 0000000000000000 R14: ffff9c99619a5000 R15: ffff9c9962a01c00
[ 600.351684] FS: 00007fb2be27c700(0000) GS:ffff9c999e880000(0000) knlGS:0000000000000000
[ 600.351686] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 600.351689] CR2: 00007fb2bdadbad0 CR3: 000000041c328001 CR4: 00000000001606e0
Crash happened because list_del_rcu() was called twice for smp->ltk. This
was possible if unpair_device was called right after ltk was generated
but before keys were distributed.
In this commit smp_cancel_pairing was refactored to cancel pairing if it
is in progress and otherwise just removes keys. Once keys are removed from
rcu list, pointers to smp context's keys are set to NULL to make sure
removed list items are not accessed later.
This commit also adjusts the functionality of mgmt unpair_device() little
bit. Previously pairing was canceled only if pairing was in state that
keys were already generated. With this commit unpair_device() cancels
pairing already in earlier states.
Bug was found by fuzzing kernel SMP implementation using Synopsys
Defensics.
Reported-by: Pekka Oikarainen <[email protected]>
Signed-off-by: Matias Karhumaa <[email protected]>
Signed-off-by: Johan Hedberg <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/bluetooth/mgmt.c | 7 ++-----
net/bluetooth/smp.c | 29 +++++++++++++++++++++++++----
net/bluetooth/smp.h | 3 ++-
3 files changed, 29 insertions(+), 10 deletions(-)
diff --git a/net/bluetooth/mgmt.c b/net/bluetooth/mgmt.c
index b1b0a1c0bd8d..ecc3da6a14a1 100644
--- a/net/bluetooth/mgmt.c
+++ b/net/bluetooth/mgmt.c
@@ -3083,9 +3083,8 @@ static int unpair_device(struct sock *sk, struct hci_dev *hdev, void *data,
/* LE address type */
addr_type = le_addr_type(cp->addr.type);
- hci_remove_irk(hdev, &cp->addr.bdaddr, addr_type);
-
- err = hci_remove_ltk(hdev, &cp->addr.bdaddr, addr_type);
+ /* Abort any ongoing SMP pairing. Removes ltk and irk if they exist. */
+ err = smp_cancel_and_remove_pairing(hdev, &cp->addr.bdaddr, addr_type);
if (err < 0) {
err = mgmt_cmd_complete(sk, hdev->id, MGMT_OP_UNPAIR_DEVICE,
MGMT_STATUS_NOT_PAIRED, &rp,
@@ -3099,8 +3098,6 @@ static int unpair_device(struct sock *sk, struct hci_dev *hdev, void *data,
goto done;
}
- /* Abort any ongoing SMP pairing */
- smp_cancel_pairing(conn);
/* Defer clearing up the connection parameters until closing to
* give a chance of keeping them if a repairing happens.
diff --git a/net/bluetooth/smp.c b/net/bluetooth/smp.c
index 0dc27d2e8f18..bedfaef2c59e 100644
--- a/net/bluetooth/smp.c
+++ b/net/bluetooth/smp.c
@@ -2371,30 +2371,51 @@ unlock:
return ret;
}
-void smp_cancel_pairing(struct hci_conn *hcon)
+int smp_cancel_and_remove_pairing(struct hci_dev *hdev, bdaddr_t *bdaddr,
+ u8 addr_type)
{
- struct l2cap_conn *conn = hcon->l2cap_data;
+ struct hci_conn *hcon;
+ struct l2cap_conn *conn;
struct l2cap_chan *chan;
struct smp_chan *smp;
+ int err;
+
+ err = hci_remove_ltk(hdev, bdaddr, addr_type);
+ hci_remove_irk(hdev, bdaddr, addr_type);
+
+ hcon = hci_conn_hash_lookup_le(hdev, bdaddr, addr_type);
+ if (!hcon)
+ goto done;
+ conn = hcon->l2cap_data;
if (!conn)
- return;
+ goto done;
chan = conn->smp;
if (!chan)
- return;
+ goto done;
l2cap_chan_lock(chan);
smp = chan->data;
if (smp) {
+ /* Set keys to NULL to make sure smp_failure() does not try to
+ * remove and free already invalidated rcu list entries. */
+ smp->ltk = NULL;
+ smp->slave_ltk = NULL;
+ smp->remote_irk = NULL;
+
if (test_bit(SMP_FLAG_COMPLETE, &smp->flags))
smp_failure(conn, 0);
else
smp_failure(conn, SMP_UNSPECIFIED);
+ err = 0;
}
l2cap_chan_unlock(chan);
+
+done:
+ return err;
}
static int smp_cmd_encrypt_info(struct l2cap_conn *conn, struct sk_buff *skb)
diff --git a/net/bluetooth/smp.h b/net/bluetooth/smp.h
index ffcc70b6b199..993cbd7bcfe7 100644
--- a/net/bluetooth/smp.h
+++ b/net/bluetooth/smp.h
@@ -180,7 +180,8 @@ enum smp_key_pref {
};
/* SMP Commands */
-void smp_cancel_pairing(struct hci_conn *hcon);
+int smp_cancel_and_remove_pairing(struct hci_dev *hdev, bdaddr_t *bdaddr,
+ u8 addr_type);
bool smp_sufficient_security(struct hci_conn *hcon, u8 sec_level,
enum smp_key_pref key_pref);
int smp_conn_security(struct hci_conn *hcon, __u8 sec_level);
--
2.17.1
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit d85536cde91fcfed6fb8d983783bd2b92c843939 ]
Add missing prepare/unprepare operations for fbi->clk,
this fixes following kernel warning:
------------[ cut here ]------------
WARNING: CPU: 0 PID: 1 at drivers/clk/clk.c:874 clk_core_enable+0x2c/0x1b0
Enabling unprepared disp0_clk
Modules linked in:
CPU: 0 PID: 1 Comm: swapper Not tainted 4.18.0-rc8-00032-g02b43ddd4f21-dirty #25
Hardware name: Marvell MMP2 (Device Tree Support)
[<c010f7cc>] (unwind_backtrace) from [<c010cc6c>] (show_stack+0x10/0x14)
[<c010cc6c>] (show_stack) from [<c011dab4>] (__warn+0xd8/0xf0)
[<c011dab4>] (__warn) from [<c011db10>] (warn_slowpath_fmt+0x44/0x6c)
[<c011db10>] (warn_slowpath_fmt) from [<c043898c>] (clk_core_enable+0x2c/0x1b0)
[<c043898c>] (clk_core_enable) from [<c0439ec8>] (clk_core_enable_lock+0x18/0x2c)
[<c0439ec8>] (clk_core_enable_lock) from [<c0436698>] (pxa168fb_probe+0x464/0x6ac)
[<c0436698>] (pxa168fb_probe) from [<c04779a0>] (platform_drv_probe+0x48/0x94)
[<c04779a0>] (platform_drv_probe) from [<c0475bec>] (driver_probe_device+0x328/0x470)
[<c0475bec>] (driver_probe_device) from [<c0475de4>] (__driver_attach+0xb0/0x124)
[<c0475de4>] (__driver_attach) from [<c0473c38>] (bus_for_each_dev+0x64/0xa0)
[<c0473c38>] (bus_for_each_dev) from [<c0474ee0>] (bus_add_driver+0x1b8/0x230)
[<c0474ee0>] (bus_add_driver) from [<c0476a20>] (driver_register+0xac/0xf0)
[<c0476a20>] (driver_register) from [<c0102dd4>] (do_one_initcall+0xb8/0x1f0)
[<c0102dd4>] (do_one_initcall) from [<c0b010a0>] (kernel_init_freeable+0x294/0x2e0)
[<c0b010a0>] (kernel_init_freeable) from [<c07e9eb8>] (kernel_init+0x8/0x10c)
[<c07e9eb8>] (kernel_init) from [<c01010e8>] (ret_from_fork+0x14/0x2c)
Exception stack(0xd008bfb0 to 0xd008bff8)
bfa0: 00000000 00000000 00000000 00000000
bfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
bfe0: 00000000 00000000 00000000 00000000 00000013 00000000
---[ end trace c0af40f9e2ed7cb4 ]---
Signed-off-by: Lubomir Rintel <[email protected]>
[b.zolnierkie: enhance patch description a bit]
Signed-off-by: Bartlomiej Zolnierkiewicz <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/video/fbdev/pxa168fb.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/video/fbdev/pxa168fb.c b/drivers/video/fbdev/pxa168fb.c
index efb57c059997..5190b1749e2a 100644
--- a/drivers/video/fbdev/pxa168fb.c
+++ b/drivers/video/fbdev/pxa168fb.c
@@ -712,7 +712,7 @@ static int pxa168fb_probe(struct platform_device *pdev)
/*
* enable controller clock
*/
- clk_enable(fbi->clk);
+ clk_prepare_enable(fbi->clk);
pxa168fb_set_par(info);
@@ -767,7 +767,7 @@ static int pxa168fb_probe(struct platform_device *pdev)
failed_free_cmap:
fb_dealloc_cmap(&info->cmap);
failed_free_clk:
- clk_disable(fbi->clk);
+ clk_disable_unprepare(fbi->clk);
failed_free_fbmem:
dma_free_coherent(fbi->dev, info->fix.smem_len,
info->screen_base, fbi->fb_start_dma);
@@ -807,7 +807,7 @@ static int pxa168fb_remove(struct platform_device *pdev)
dma_free_writecombine(fbi->dev, PAGE_ALIGN(info->fix.smem_len),
info->screen_base, info->fix.smem_start);
- clk_disable(fbi->clk);
+ clk_disable_unprepare(fbi->clk);
framebuffer_release(info);
--
2.17.1
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 215ab0f021c9fea3c18b75e7d522400ee6a49990 ]
After commit d6990976af7c5d8f55903bfb4289b6fb030bf754 ("vti6: fix PMTU caching
and reporting on xmit"), some too big skbs might be potentially passed down to
__xfrm6_output, causing it to fail to transmit but not free the skb, causing a
leak of skb, and consequentially a leak of dst references.
After running pmtu.sh, that shows as failure to unregister devices in a namespace:
[ 311.397671] unregister_netdevice: waiting for veth_b to become free. Usage count = 1
The fix is to call kfree_skb in case of transmit failures.
Fixes: dd767856a36e ("xfrm6: Don't call icmpv6_send on local error")
Signed-off-by: Thadeu Lima de Souza Cascardo <[email protected]>
Reviewed-by: Sabrina Dubroca <[email protected]>
Signed-off-by: Steffen Klassert <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/ipv6/xfrm6_output.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/net/ipv6/xfrm6_output.c b/net/ipv6/xfrm6_output.c
index 4d09ce6fa90e..64862c5084ee 100644
--- a/net/ipv6/xfrm6_output.c
+++ b/net/ipv6/xfrm6_output.c
@@ -165,9 +165,11 @@ static int __xfrm6_output(struct net *net, struct sock *sk, struct sk_buff *skb)
if (toobig && xfrm6_local_dontfrag(skb)) {
xfrm6_local_rxpmtu(skb, mtu);
+ kfree_skb(skb);
return -EMSGSIZE;
} else if (!skb->ignore_df && toobig && skb->sk) {
xfrm_local_error(skb, mtu);
+ kfree_skb(skb);
return -EMSGSIZE;
}
--
2.17.1
On Thu, Nov 08, 2018 at 01:50:41PM -0800, Greg Kroah-Hartman wrote:
> 4.4-stable review patch. If anyone has any objections, please let me know.
> [ Upstream commit 838fe1887765f4cc679febea60d87d2a06bd300e ]
Please check the discussion under
https://lore.kernel.org/lkml/[email protected]/
Jiri's reply:
"This patch just removes pointless try_to_freeze(), that's guaranteed
not to do anything and return immediately, as the btrfs kthread is not
freezable. So I don't think it's needed in stable; the semantics is
equivalent before and after."
Sasha was fine with dropping the patch from stable candidates and this
has not changed. Thanks.
On Fri, Nov 09, 2018 at 12:28:10AM +0100, David Sterba wrote:
>On Thu, Nov 08, 2018 at 01:50:41PM -0800, Greg Kroah-Hartman wrote:
>> 4.4-stable review patch. If anyone has any objections, please let me know.
>
>> [ Upstream commit 838fe1887765f4cc679febea60d87d2a06bd300e ]
>
>Please check the discussion under
>
>https://lore.kernel.org/lkml/[email protected]/
>
>Jiri's reply:
>
>"This patch just removes pointless try_to_freeze(), that's guaranteed
>not to do anything and return immediately, as the btrfs kthread is not
>freezable. So I don't think it's needed in stable; the semantics is
>equivalent before and after."
>
>Sasha was fine with dropping the patch from stable candidates and this
>has not changed. Thanks.
Indeed, I thought I dropped it but I see that I didn't. My bad, sorry.
--
Thanks,
Sasha
On Thu, Nov 08, 2018 at 07:04:38PM -0500, Sasha Levin wrote:
> On Fri, Nov 09, 2018 at 12:28:10AM +0100, David Sterba wrote:
> > On Thu, Nov 08, 2018 at 01:50:41PM -0800, Greg Kroah-Hartman wrote:
> > > 4.4-stable review patch. If anyone has any objections, please let me know.
> >
> > > [ Upstream commit 838fe1887765f4cc679febea60d87d2a06bd300e ]
> >
> > Please check the discussion under
> >
> > https://lore.kernel.org/lkml/[email protected]/
> >
> > Jiri's reply:
> >
> > "This patch just removes pointless try_to_freeze(), that's guaranteed
> > not to do anything and return immediately, as the btrfs kthread is not
> > freezable. So I don't think it's needed in stable; the semantics is
> > equivalent before and after."
> >
> > Sasha was fine with dropping the patch from stable candidates and this
> > has not changed. Thanks.
>
> Indeed, I thought I dropped it but I see that I didn't. My bad, sorry.
I've now dropped this. David, thanks for letting us know.
greg k-h
On 11/8/18 1:50 PM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.4.163 release.
> There are 114 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Sat Nov 10 21:50:28 UTC 2018.
> Anything received after that time might be too late.
>
Building i386:allnoconfig ... failed
--------------
Error log:
kernel/built-in.o: In function `cpu_startup_entry':
(.text+0x1a2e9): undefined reference to `cpuidle_devices'
make[1]: *** [vmlinux] Error 1
make: *** [sub-make] Error 2
Bisect results:
# bad: [70cfa9ca6595d3238b36b9f6b36cf6e18dfd2c3b] Linux 4.4.163-rc1
# good: [24c2342b8e51ab3185e68470709904150a1e3ee0] Linux 4.4.162
git bisect start 'HEAD' 'v4.4.162'
# good: [008f87b2e9c5db7dd3756832a9e449415d837c7d] ixgbe: fix RSS limit for X550
git bisect good 008f87b2e9c5db7dd3756832a9e449415d837c7d
# good: [5d92c564ec3dd9a5833974f3ce113cc7a94e0f6a] mtd: spi-nor: Add support for is25wp series chips
git bisect good 5d92c564ec3dd9a5833974f3ce113cc7a94e0f6a
# good: [71fba871e4a07400eb1400b1e6b45ca3a5487834] rtnetlink: Disallow FDB configuration for non-Ethernet device
git bisect good 71fba871e4a07400eb1400b1e6b45ca3a5487834
# good: [4d1024282b1259209bb4601f4b51dce367cf8a02] IB/ucm: Fix Spectre v1 vulnerability
git bisect good 4d1024282b1259209bb4601f4b51dce367cf8a02
# good: [fe9d47ae282ebd2bb10a36ec2bace1afd0ba050e] Input: elan_i2c - add ACPI ID for Lenovo IdeaPad 330-15IGM
git bisect good fe9d47ae282ebd2bb10a36ec2bace1afd0ba050e
# bad: [573e8431fe60169157440664f74c6af254b3b00e] x86/percpu: Fix this_cpu_read()
git bisect bad 573e8431fe60169157440664f74c6af254b3b00e
# good: [be0ac51f4181a18c458080d79919aeee17ce0c68] sched/fair: Fix throttle_list starvation with low CFS quota
git bisect good be0ac51f4181a18c458080d79919aeee17ce0c68
# first bad commit: [573e8431fe60169157440664f74c6af254b3b00e] x86/percpu: Fix this_cpu_read()
Full results will follow later, after builds are complete.
Guenter
On 11/9/18 5:50 AM, Guenter Roeck wrote:
> On 11/8/18 1:50 PM, Greg Kroah-Hartman wrote:
>> This is the start of the stable review cycle for the 4.4.163 release.
>> There are 114 patches in this series, all will be posted as a response
>> to this one. If anyone has any issues with these being applied, please
>> let me know.
>>
>> Responses should be made by Sat Nov 10 21:50:28 UTC 2018.
>> Anything received after that time might be too late.
>>
>
> Building i386:allnoconfig ... failed
> --------------
> Error log:
> kernel/built-in.o: In function `cpu_startup_entry':
> (.text+0x1a2e9): undefined reference to `cpuidle_devices'
> make[1]: *** [vmlinux] Error 1
> make: *** [sub-make] Error 2
>
>
> Bisect results:
>
> # bad: [70cfa9ca6595d3238b36b9f6b36cf6e18dfd2c3b] Linux 4.4.163-rc1
> # good: [24c2342b8e51ab3185e68470709904150a1e3ee0] Linux 4.4.162
> git bisect start 'HEAD' 'v4.4.162'
> # good: [008f87b2e9c5db7dd3756832a9e449415d837c7d] ixgbe: fix RSS limit for X550
> git bisect good 008f87b2e9c5db7dd3756832a9e449415d837c7d
> # good: [5d92c564ec3dd9a5833974f3ce113cc7a94e0f6a] mtd: spi-nor: Add support for is25wp series chips
> git bisect good 5d92c564ec3dd9a5833974f3ce113cc7a94e0f6a
> # good: [71fba871e4a07400eb1400b1e6b45ca3a5487834] rtnetlink: Disallow FDB configuration for non-Ethernet device
> git bisect good 71fba871e4a07400eb1400b1e6b45ca3a5487834
> # good: [4d1024282b1259209bb4601f4b51dce367cf8a02] IB/ucm: Fix Spectre v1 vulnerability
> git bisect good 4d1024282b1259209bb4601f4b51dce367cf8a02
> # good: [fe9d47ae282ebd2bb10a36ec2bace1afd0ba050e] Input: elan_i2c - add ACPI ID for Lenovo IdeaPad 330-15IGM
> git bisect good fe9d47ae282ebd2bb10a36ec2bace1afd0ba050e
> # bad: [573e8431fe60169157440664f74c6af254b3b00e] x86/percpu: Fix this_cpu_read()
> git bisect bad 573e8431fe60169157440664f74c6af254b3b00e
> # good: [be0ac51f4181a18c458080d79919aeee17ce0c68] sched/fair: Fix throttle_list starvation with low CFS quota
> git bisect good be0ac51f4181a18c458080d79919aeee17ce0c68
> # first bad commit: [573e8431fe60169157440664f74c6af254b3b00e] x86/percpu: Fix this_cpu_read()
>
> Full results will follow later, after builds are complete.
>
> Guenter
Upstream commit 9bd616e3dbed ("cpuidle: Do not access cpuidle_devices
when !CONFIG_CPU_IDLE") should fix the problem.
Guenter
On Fri, Nov 09, 2018 at 05:50:09AM -0800, Guenter Roeck wrote:
> On 11/8/18 1:50 PM, Greg Kroah-Hartman wrote:
> > This is the start of the stable review cycle for the 4.4.163 release.
> > There are 114 patches in this series, all will be posted as a response
> > to this one. If anyone has any issues with these being applied, please
> > let me know.
> >
> > Responses should be made by Sat Nov 10 21:50:28 UTC 2018.
> > Anything received after that time might be too late.
> >
>
> Building i386:allnoconfig ... failed
> --------------
> Error log:
> kernel/built-in.o: In function `cpu_startup_entry':
> (.text+0x1a2e9): undefined reference to `cpuidle_devices'
> make[1]: *** [vmlinux] Error 1
> make: *** [sub-make] Error 2
>
>
> Bisect results:
>
> # bad: [70cfa9ca6595d3238b36b9f6b36cf6e18dfd2c3b] Linux 4.4.163-rc1
> # good: [24c2342b8e51ab3185e68470709904150a1e3ee0] Linux 4.4.162
> git bisect start 'HEAD' 'v4.4.162'
> # good: [008f87b2e9c5db7dd3756832a9e449415d837c7d] ixgbe: fix RSS limit for X550
> git bisect good 008f87b2e9c5db7dd3756832a9e449415d837c7d
> # good: [5d92c564ec3dd9a5833974f3ce113cc7a94e0f6a] mtd: spi-nor: Add support for is25wp series chips
> git bisect good 5d92c564ec3dd9a5833974f3ce113cc7a94e0f6a
> # good: [71fba871e4a07400eb1400b1e6b45ca3a5487834] rtnetlink: Disallow FDB configuration for non-Ethernet device
> git bisect good 71fba871e4a07400eb1400b1e6b45ca3a5487834
> # good: [4d1024282b1259209bb4601f4b51dce367cf8a02] IB/ucm: Fix Spectre v1 vulnerability
> git bisect good 4d1024282b1259209bb4601f4b51dce367cf8a02
> # good: [fe9d47ae282ebd2bb10a36ec2bace1afd0ba050e] Input: elan_i2c - add ACPI ID for Lenovo IdeaPad 330-15IGM
> git bisect good fe9d47ae282ebd2bb10a36ec2bace1afd0ba050e
> # bad: [573e8431fe60169157440664f74c6af254b3b00e] x86/percpu: Fix this_cpu_read()
> git bisect bad 573e8431fe60169157440664f74c6af254b3b00e
> # good: [be0ac51f4181a18c458080d79919aeee17ce0c68] sched/fair: Fix throttle_list starvation with low CFS quota
> git bisect good be0ac51f4181a18c458080d79919aeee17ce0c68
> # first bad commit: [573e8431fe60169157440664f74c6af254b3b00e] x86/percpu: Fix this_cpu_read()
>
> Full results will follow later, after builds are complete.
Ugh, kbuild just reported this as well. Something's odd with 4.4 and
this patch, I think I might just drop it as no one has ever reported
this issue there...
Let me dig some more first...
greg k-h
On Thu, Nov 08, 2018 at 01:51:18PM -0800, Greg Kroah-Hartman wrote:
> 4.4-stable review patch. If anyone has any objections, please let me know.
>
This patch was partly wrong. Here is the followup fix:
94d7ee0baa8b ("l2tp: hold tunnel socket when handling control frames in l2tp_ip and l2tp_ip6")
Both a3c18422a4 ("l2tp: hold socket before dropping lock in l2tp_ip{, 6}_recv()")
and 94d7ee0baa8b ("l2tp: hold tunnel socket when handling control frames in l2tp_ip and l2tp_ip6")
should be applied/backported together.
> ------------------
>
> [ Upstream commit a3c18422a4b4e108bcf6a2328f48867e1003fd95 ]
>
> Socket must be held while under the protection of the l2tp lock; there
> is no guarantee that sk remains valid after the read_unlock_bh() call.
>
> Same issue for l2tp_ip and l2tp_ip6.
>
> Signed-off-by: Guillaume Nault <[email protected]>
> Signed-off-by: David S. Miller <[email protected]>
> Signed-off-by: Sasha Levin <[email protected]>
> ---
> net/l2tp/l2tp_ip.c | 11 ++++++-----
> net/l2tp/l2tp_ip6.c | 11 ++++++-----
> 2 files changed, 12 insertions(+), 10 deletions(-)
>
> diff --git a/net/l2tp/l2tp_ip.c b/net/l2tp/l2tp_ip.c
> index 48ab93842322..c7e6098c924e 100644
> --- a/net/l2tp/l2tp_ip.c
> +++ b/net/l2tp/l2tp_ip.c
> @@ -184,14 +184,15 @@ pass_up:
>
> read_lock_bh(&l2tp_ip_lock);
> sk = __l2tp_ip_bind_lookup(net, iph->daddr, 0, tunnel_id);
> + if (!sk) {
> + read_unlock_bh(&l2tp_ip_lock);
> + goto discard;
> + }
> +
> + sock_hold(sk);
sock_hold(sk) is missing in the 'if' branch of this condition.
> read_unlock_bh(&l2tp_ip_lock);
> }
>
> - if (sk == NULL)
> - goto discard;
> -
> - sock_hold(sk);
> -
Original sock_hold(sk) covered both parts of the condition.
> if (!xfrm4_policy_check(sk, XFRM_POLICY_IN, skb))
> goto discard_put;
>
> diff --git a/net/l2tp/l2tp_ip6.c b/net/l2tp/l2tp_ip6.c
> index bcdab1cba773..5fe0a6f6af3d 100644
> --- a/net/l2tp/l2tp_ip6.c
> +++ b/net/l2tp/l2tp_ip6.c
> @@ -196,14 +196,15 @@ pass_up:
> read_lock_bh(&l2tp_ip6_lock);
> sk = __l2tp_ip6_bind_lookup(&init_net, &iph->daddr,
> 0, tunnel_id);
> + if (!sk) {
> + read_unlock_bh(&l2tp_ip6_lock);
> + goto discard;
> + }
> +
> + sock_hold(sk);
Same here.
> read_unlock_bh(&l2tp_ip6_lock);
> }
>
> - if (sk == NULL)
> - goto discard;
> -
> - sock_hold(sk);
> -
> if (!xfrm6_policy_check(sk, XFRM_POLICY_IN, skb))
> goto discard_put;
>
> --
> 2.17.1
>
On Fri, Nov 09, 2018 at 06:14:06AM -0800, Guenter Roeck wrote:
> On 11/9/18 5:50 AM, Guenter Roeck wrote:
> > On 11/8/18 1:50 PM, Greg Kroah-Hartman wrote:
> > > This is the start of the stable review cycle for the 4.4.163 release.
> > > There are 114 patches in this series, all will be posted as a response
> > > to this one.? If anyone has any issues with these being applied, please
> > > let me know.
> > >
> > > Responses should be made by Sat Nov 10 21:50:28 UTC 2018.
> > > Anything received after that time might be too late.
> > >
> >
> > Building i386:allnoconfig ... failed
> > --------------
> > Error log:
> > kernel/built-in.o: In function `cpu_startup_entry':
> > (.text+0x1a2e9): undefined reference to `cpuidle_devices'
> > make[1]: *** [vmlinux] Error 1
> > make: *** [sub-make] Error 2
> >
> >
> > Bisect results:
> >
> > # bad: [70cfa9ca6595d3238b36b9f6b36cf6e18dfd2c3b] Linux 4.4.163-rc1
> > # good: [24c2342b8e51ab3185e68470709904150a1e3ee0] Linux 4.4.162
> > git bisect start 'HEAD' 'v4.4.162'
> > # good: [008f87b2e9c5db7dd3756832a9e449415d837c7d] ixgbe: fix RSS limit for X550
> > git bisect good 008f87b2e9c5db7dd3756832a9e449415d837c7d
> > # good: [5d92c564ec3dd9a5833974f3ce113cc7a94e0f6a] mtd: spi-nor: Add support for is25wp series chips
> > git bisect good 5d92c564ec3dd9a5833974f3ce113cc7a94e0f6a
> > # good: [71fba871e4a07400eb1400b1e6b45ca3a5487834] rtnetlink: Disallow FDB configuration for non-Ethernet device
> > git bisect good 71fba871e4a07400eb1400b1e6b45ca3a5487834
> > # good: [4d1024282b1259209bb4601f4b51dce367cf8a02] IB/ucm: Fix Spectre v1 vulnerability
> > git bisect good 4d1024282b1259209bb4601f4b51dce367cf8a02
> > # good: [fe9d47ae282ebd2bb10a36ec2bace1afd0ba050e] Input: elan_i2c - add ACPI ID for Lenovo IdeaPad 330-15IGM
> > git bisect good fe9d47ae282ebd2bb10a36ec2bace1afd0ba050e
> > # bad: [573e8431fe60169157440664f74c6af254b3b00e] x86/percpu: Fix this_cpu_read()
> > git bisect bad 573e8431fe60169157440664f74c6af254b3b00e
> > # good: [be0ac51f4181a18c458080d79919aeee17ce0c68] sched/fair: Fix throttle_list starvation with low CFS quota
> > git bisect good be0ac51f4181a18c458080d79919aeee17ce0c68
> > # first bad commit: [573e8431fe60169157440664f74c6af254b3b00e] x86/percpu: Fix this_cpu_read()
> >
> > Full results will follow later, after builds are complete.
> >
> > Guenter
>
> Upstream commit 9bd616e3dbed ("cpuidle: Do not access cpuidle_devices
> when !CONFIG_CPU_IDLE") should fix the problem.
Thanks, you beat me too it! Now queued up and I've pushed out a -rc2
with that fix added.
greg k-h
On Fri, Nov 09, 2018 at 04:33:32PM +0100, Guillaume Nault wrote:
> On Thu, Nov 08, 2018 at 01:51:18PM -0800, Greg Kroah-Hartman wrote:
> > 4.4-stable review patch. If anyone has any objections, please let me know.
> >
> This patch was partly wrong. Here is the followup fix:
> 94d7ee0baa8b ("l2tp: hold tunnel socket when handling control frames in l2tp_ip and l2tp_ip6")
>
> Both a3c18422a4 ("l2tp: hold socket before dropping lock in l2tp_ip{, 6}_recv()")
> and 94d7ee0baa8b ("l2tp: hold tunnel socket when handling control frames in l2tp_ip and l2tp_ip6")
> should be applied/backported together.
Thanks for letting me know, I've now backported this as well.
greg k-h
On Fri, Nov 09, 2018 at 08:28:56AM -0800, Greg Kroah-Hartman wrote:
> On Fri, Nov 09, 2018 at 04:33:32PM +0100, Guillaume Nault wrote:
> > On Thu, Nov 08, 2018 at 01:51:18PM -0800, Greg Kroah-Hartman wrote:
> > > 4.4-stable review patch. If anyone has any objections, please let me know.
> > >
> > This patch was partly wrong. Here is the followup fix:
> > 94d7ee0baa8b ("l2tp: hold tunnel socket when handling control frames in l2tp_ip and l2tp_ip6")
> >
> > Both a3c18422a4 ("l2tp: hold socket before dropping lock in l2tp_ip{, 6}_recv()")
> > and 94d7ee0baa8b ("l2tp: hold tunnel socket when handling control frames in l2tp_ip and l2tp_ip6")
> > should be applied/backported together.
>
> Thanks for letting me know, I've now backported this as well.
>
Great, it should all be fine now.
Thanks.
On 11/08/2018 02:50 PM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.4.163 release.
> There are 114 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Sat Nov 10 21:50:28 UTC 2018.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.4.163-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.4.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
>
Compiled and booted on my new test system. I don't have a reference for
dmesg regressions and I haven't noticed any problems.
thanks,
-- Shuah
On Thu, Nov 08, 2018 at 01:50:15PM -0800, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.4.163 release.
> There are 114 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Sat Nov 10 21:50:28 UTC 2018.
> Anything received after that time might be too late.
>
For v4.4.162-116-gb63fc4e232df:
Build results:
total: 150 pass: 150 fail: 0
Qemu test results:
total: 262 pass: 262 fail: 0
Details are available at https://kerneltests.org/builders/.
Guenter
On Thu, Nov 08, 2018 at 01:50:15PM -0800, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.4.163 release.
> There are 114 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Sat Nov 10 21:50:28 UTC 2018.
> Anything received after that time might be too late.
Results from Linaro’s test farm.
No regressions on arm64, arm, x86_64, and i386.
Summary
------------------------------------------------------------------------
kernel: 4.4.163-rc2
git repo: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
git branch: linux-4.4.y
git commit: b63fc4e232dfad182f129c0a55afeb860ea0ce54
git describe: v4.4.162-116-gb63fc4e232df
Test details: https://qa-reports.linaro.org/lkft/linux-stable-rc-4.4-oe/build/v4.4.162-116-gb63fc4e232df
No regressions (compared to build v4.4.162)
No fixes (compared to build v4.4.162)
--
Linaro LKFT
https://lkft.linaro.org
On Fri, Nov 09, 2018 at 01:30:40PM -0800, Guenter Roeck wrote:
> On Thu, Nov 08, 2018 at 01:50:15PM -0800, Greg Kroah-Hartman wrote:
> > This is the start of the stable review cycle for the 4.4.163 release.
> > There are 114 patches in this series, all will be posted as a response
> > to this one. If anyone has any issues with these being applied, please
> > let me know.
> >
> > Responses should be made by Sat Nov 10 21:50:28 UTC 2018.
> > Anything received after that time might be too late.
> >
>
> For v4.4.162-116-gb63fc4e232df:
>
> Build results:
> total: 150 pass: 150 fail: 0
> Qemu test results:
> total: 262 pass: 262 fail: 0
>
> Details are available at https://kerneltests.org/builders/.
Great! Thanks for testing all of these and letting me know.
greg k-h