2018-12-14 12:04:12

by Greg Kroah-Hartman

[permalink] [raw]
Subject: [PATCH 4.19 000/142] 4.19.10-stable review

This is the start of the stable review cycle for the 4.19.10 release.
There are 142 patches in this series, all will be posted as a response
to this one. If anyone has any issues with these being applied, please
let me know.

Responses should be made by Sun Dec 16 11:57:12 UTC 2018.
Anything received after that time might be too late.

The whole patch series can be found in one patch at:
https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.19.10-rc1.gz
or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.19.y
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <[email protected]>
Linux 4.19.10-rc1

Edward Cree <[email protected]>
bpf: fix off-by-one error in adjust_subprog_starts

Piotr Stankiewicz <[email protected]>
IB/hfi1: Fix an out-of-bounds access in get_hw_stats

Hui Wang <[email protected]>
ALSA: hda/realtek - Fix the mute LED regresion on Lenovo X1 Carbon

Jian-Hong Pan <[email protected]>
ALSA: hda/realtek: Enable audio jacks of ASUS UX433FN/UX333FA with ALC294

Jian-Hong Pan <[email protected]>
ALSA: hda/realtek: Enable audio jacks of ASUS UX533FD with ALC294

Chris Chiu <[email protected]>
ALSA: hda/realtek: ALC294 mic and headset-mode fixups for ASUS X542UN

Kailang Yang <[email protected]>
ALSA: hda/realtek - Fixed headphone issue for ALC700

Takashi Sakamoto <[email protected]>
ALSA: fireface: fix reference to wrong register for clock configuration

Matthew Wilcox <[email protected]>
dax: Check page->mapping isn't NULL

Tigran Mkrtchyan <[email protected]>
flexfiles: enforce per-mirror stateid only for v4 DSes

Pan Bian <[email protected]>
ocfs2: fix potential use after free

Li Zhijian <[email protected]>
initramfs: clean old path before creating a hardlink

Anders Roxell <[email protected]>
kernel/kcov.c: mark funcs in __sanitizer_cov_trace_pc() as notrace

Alexey Dobriyan <[email protected]>
proc: fixup map_files test on arm

Qian Cai <[email protected]>
debugobjects: avoid recursive calls with kmemleak

Pan Bian <[email protected]>
hfsplus: do not free node before using

Pan Bian <[email protected]>
hfs: do not free node before using

Wei Yang <[email protected]>
mm/page_alloc.c: fix calculation of pgdat->nr_zones

Larry Chen <[email protected]>
ocfs2: fix deadlock caused by ocfs2_defrag_extent()

Lorenzo Pieralisi <[email protected]>
ACPI/IORT: Fix iort_get_platform_device_domain() uninitialized pointer value

Prabhath Sajeepa <[email protected]>
nvme-rdma: fix double freeing of async event data

Sagi Grimberg <[email protected]>
nvme: flush namespace scanning work just before removing namespaces

Christoph Hellwig <[email protected]>
nvme: warn when finding multi-port subsystems without multipathing enabled

Colin Ian King <[email protected]>
fscache, cachefiles: remove redundant variable 'cache'

Nathan Chancellor <[email protected]>
cachefiles: Explicitly cast enumerated type in put_object

NeilBrown <[email protected]>
fscache: fix race between enablement and dropping of object

David Howells <[email protected]>
afs: Fix validation/callback interaction

Kees Cook <[email protected]>
pstore/ram: Correctly calculate usable PRZ bytes

Pan Bian <[email protected]>
pvcalls-front: fixes incorrect error handling

Igor Druzhinin <[email protected]>
Revert "xen/balloon: Mark unallocated host memory as UNUSABLE"

Srikanth Boddepalli <[email protected]>
xen: xlate_mmu: add missing header to fix 'W=1' warning

Y.C. Chen <[email protected]>
drm/ast: fixed reading monitor EDID not stable issue

shaoyunl <[email protected]>
drm/amdgpu: Add delay after enable RLC ucode

Pan Bian <[email protected]>
net: hisilicon: remove unexpected free_netdev

Josh Elsasser <[email protected]>
ixgbe: recognize 1000BaseLX SFP modules as 1Gbps

Yunjian Wang <[email protected]>
igb: fix uninitialized variables

Kiran Kumar Modukuri <[email protected]>
cachefiles: Fix page leak in cachefiles_read_backing_file while vmscan is active

kiran.modukuri <[email protected]>
fscache: Fix race in fscache_op_complete() due to split atomic_sub & read

David Howells <[email protected]>
cachefiles: Fix an assertion failure when trying to update a failed object

Hui Wang <[email protected]>
ALSA: usb-audio: Add vendor and product name for Dell WD19 Dock

Taehee Yoo <[email protected]>
netfilter: nf_tables: deactivate expressions in rule replecement routine

Marek Szyprowski <[email protected]>
usb: gadget: u_ether: fix unsafe list iteration

Lorenzo Bianconi <[email protected]>
net: thunderx: fix NULL pointer dereference in nic_remove

Yi Wang <[email protected]>
x86/kvm/vmx: fix old-style function declaration

Yi Wang <[email protected]>
KVM: x86: fix empty-body warnings

Liran Alon <[email protected]>
KVM: VMX: Update shared MSRs to be saved/restored on MSR_EFER.LMA changes

Taehee Yoo <[email protected]>
netfilter: nf_conncount: remove wrong condition check routine

Taehee Yoo <[email protected]>
netfilter: nat: fix double register in masquerade modules

Taehee Yoo <[email protected]>
netfilter: add missing error handling code for register functions

Artemy Kovalyov <[email protected]>
IB/mlx5: Fix page fault handling for MW

Alin Nastac <[email protected]>
netfilter: ipv6: Preserve link scope traffic original oif

Christian Hewitt <[email protected]>
drm/meson: add support for 1080p25 mode

Mika Westerberg <[email protected]>
thunderbolt: Prevent root port runtime suspend during NVM upgrade

Aaro Koskinen <[email protected]>
USB: omap_udc: fix rejection of out transfers when DMA is used

Aaro Koskinen <[email protected]>
USB: omap_udc: fix USB gadget functionality on Palm Tungsten E

Aaro Koskinen <[email protected]>
USB: omap_udc: fix omap_udc_start() on 15xx machines

Aaro Koskinen <[email protected]>
USB: omap_udc: fix crashes on probe error and module removal

Aaro Koskinen <[email protected]>
USB: omap_udc: use devm_request_irq()

Xin Long <[email protected]>
ipvs: call ip_vs_dst_notifier earlier than ipv6_dev_notf

Arnd Bergmann <[email protected]>
fsi: master-ast-cf: select GENERIC_ALLOCATOR

Martynas Pumputis <[email protected]>
bpf: fix check of allowed specifiers in bpf_trace_printk

Yixian Liu <[email protected]>
RDMA/hns: Bugfix pbl configuration for rereg mr

Pan Bian <[email protected]>
exportfs: do not read dentry after free

Peter Ujfalusi <[email protected]>
ASoC: omap-dmic: Add pm_qos handling to avoid overruns with CPU_IDLE

Peter Ujfalusi <[email protected]>
ASoC: omap-mcpdm: Add pm_qos handling to avoid under/overruns with CPU_IDLE

Peter Ujfalusi <[email protected]>
ASoC: omap-mcbsp: Fix latency value calculation for pm_qos

Jakub Kicinski <[email protected]>
tools: bpftool: fix potential NULL pointer dereference in do_load

Kamal Heib <[email protected]>
RDMA/rdmavt: Fix rvt_create_ah function signature

Selvin Xavier <[email protected]>
RDMA/bnxt_re: Avoid accessing the device structure after it is freed

Selvin Xavier <[email protected]>
RDMA/bnxt_re: Fix system hang when registration with L2 driver fails

Parav Pandit <[email protected]>
RDMA/core: Add GIDs while changing MAC addr only for registered ndev

Majd Dibbiny <[email protected]>
RDMA/mlx5: Fix fence type for IB_WR_LOCAL_INV WR

Robbie Ko <[email protected]>
Btrfs: send, fix infinite loop due to directory rename dependencies

Romain Izard <[email protected]>
ARM: dts: at91: sama5d2: use the divided clock for SMC

Manu Gautam <[email protected]>
phy: qcom-qusb2: Fix HSTX_TRIM tuning with fused value for SDM845

Manu Gautam <[email protected]>
phy: qcom-qusb2: Use HSTX_TRIM fused value as is

Artem Savkov <[email protected]>
objtool: Fix segfault in .cold detection with -ffunction-sections

Artem Savkov <[email protected]>
objtool: Fix double-free in .cold detection error path

Keyon Jie <[email protected]>
ASoC: acpi: fix: continue searching when machine is ignored

Trent Piepho <[email protected]>
PCI: imx6: Fix link training status detection in link up check

Jiri Olsa <[email protected]>
perf tools: Restore proper cwd on return from mnt namespace

Huacai Chen <[email protected]>
hwmon: (w83795) temp4_type has writable permission

Taehee Yoo <[email protected]>
netfilter: xt_hashlimit: fix a possible memory leak in htable_create()

Jens Axboe <[email protected]>
aio: fix failure to put the file pointer

Roman Gushchin <[email protected]>
bpf: allocate local storage buffers using GFP_ATOMIC

Vadim Pasternak <[email protected]>
hwmon: (mlxreg-fan) Fix macros for tacho fault reading

Tony Lindgren <[email protected]>
spi: omap2-mcspi: Add missing suspend and resume calls

Tzung-Bi Shih <[email protected]>
ASoC: dapm: Recalculate audio map forcely when card instantiated

Peter Ujfalusi <[email protected]>
ASoC: omap-abe-twl6040: Fix missing audio card caused by deferred probing

Nicolin Chen <[email protected]>
hwmon: (ina2xx) Fix current value calculation

Thomas Richter <[email protected]>
s390/cpum_cf: Reject request for sampling in event initialization

Rohit kumar <[email protected]>
ASoC: qcom: Set dai_link id to each dai_link

Pierre-Louis Bossart <[email protected]>
ASoC: Intel: Power down links before turning off display audio power

Richard Fitzgerald <[email protected]>
ASoC: wm_adsp: Fix dma-unsafe read of scratch registers

Katsuhiro Suzuki <[email protected]>
ASoC: rockchip: add missing slave_config setting for I2S

Stefan Wahren <[email protected]>
hwmon: (raspberrypi) Fix initial notify

Nicolin Chen <[email protected]>
hwmon (ina2xx) Fix NULL id pointer in probe()

Eric Farman <[email protected]>
s390/cio: Fix cleanup when unsupported IDA format is used

Eric Farman <[email protected]>
s390/cio: Fix cleanup of pfn_array alloc failure

Florian Westphal <[email protected]>
netfilter: nf_tables: fix use-after-free when deleting compat expressions

Taehee Yoo <[email protected]>
netfilter: xt_RATEEST: remove netns exit routine

Jiri Olsa <[email protected]>
perf tools: Fix crash on synthesizing the unit

Florian Westphal <[email protected]>
selftests: add script to stress-test nft packet path vs. control plane

Florian Westphal <[email protected]>
netfilter: nf_tables: don't skip inactive chains during update

Taehee Yoo <[email protected]>
netfilter: nf_conncount: fix unexpected permanent node of list.

Taehee Yoo <[email protected]>
netfilter: nf_conncount: fix list_del corruption in conn_free

Taehee Yoo <[email protected]>
netfilter: nf_conncount: use spin_lock_bh instead of spin_lock

YueHaibing <[email protected]>
sysv: return 'err' instead of 0 in __sysv_write_inode

Bjorn Andersson <[email protected]>
arm64: dts: sdm845-mtp: Reserve reserved gpios

Vasily Khoruzhick <[email protected]>
ASoC: sun8i-codec: fix crash on module removal

Quentin Monnet <[email protected]>
tools: bpftool: prevent infinite loop in get_fdinfo()

Janusz Krzysztofik <[email protected]>
ARM: OMAP1: ams-delta: Fix possible use of uninitialized field

Adam Ford <[email protected]>
ARM: dts: am3517-som: Fix WL127x Wifi interrupt

Adam Ford <[email protected]>
ARM: dts: logicpd-somlv: Fix interrupt on mmc3_dat1

Adam Ford <[email protected]>
ARM: dts: LogicPD Torpedo: Fix mmc3_dat1 interrupt

Adam Ford <[email protected]>
ARM: dts: am3517: Fix pinmuxing for CD on MMC1

Christophe JAILLET <[email protected]>
staging: rtl8723bs: Fix the return value in case of error in 'rtw_wx_read32()'

Srinivas Kandagatla <[email protected]>
ASoC: qdsp6: q6afe-dai: Fix the dai widgets

Rohit kumar <[email protected]>
ASoC: qdsp6: q6afe: Fix wrong MI2S SD line mask

Kuninori Morimoto <[email protected]>
ASoC: rsnd: fixup clock start checker

Nathan Chancellor <[email protected]>
ARM: OMAP2+: prm44xx: Fix section annotation on omap44xx_prm_enable_io_wakeup

Sabrina Dubroca <[email protected]>
net: fix XPS static_key accounting

Sabrina Dubroca <[email protected]>
net: restore call to netdev_queue_numa_node_write when resetting XPS

Xin Long <[email protected]>
sctp: update frag_point when stream_interleave is set

Baruch Siach <[email protected]>
net: phy: sfp: correct store of detected link modes

Jason Wang <[email protected]>
virtio-net: keep vnet header zeroed after processing XDP

Nicolas Dichtel <[email protected]>
tun: forbid iface creation with rtnl ops

Yuchung Cheng <[email protected]>
tcp: fix NULL ref in tail loss probe

Eric Dumazet <[email protected]>
tcp: Do not underestimate rwnd_limited

Xin Long <[email protected]>
sctp: kfree_rcu asoc

Eric Dumazet <[email protected]>
rtnetlink: ndo_dflt_fdb_dump() only work for ARPHRD_ETHER devices

Benjamin Herrenschmidt <[email protected]>
Revert "net/ibm/emac: wrong bit is used for STA control"

Edward Cree <[email protected]>
net: use skb_list_del_init() to remove from RX sublists

Christoph Paasch <[email protected]>
net: Prevent invalid access to skb->prev in __qdisc_drop_all

Heiner Kallweit <[email protected]>
net: phy: don't allow __set_phy_supported to add unsupported modes

Eran Ben Elisha <[email protected]>
net/mlx4_en: Change min MTU size to ETH_MIN_MTU

Tarick Bedeir <[email protected]>
net/mlx4_core: Correctly set PFC param if global pause is turned off.

Su Yanjun <[email protected]>
net: 8139cp: fix a BUG triggered by changing mtu with network traffic

Shmulik Ladkani <[email protected]>
ipv6: sr: properly initialize flowi6 prior passing to ip6_route_output

Stefano Brivio <[email protected]>
neighbour: Avoid writing before skb->head in neigh_hh_output()

Stefano Brivio <[email protected]>
ipv6: Check available headroom in ip6_xmit() even without options

Jiri Wiesner <[email protected]>
ipv4: ipv6: netfilter: Adjust the frag mem limit when truesize changes


-------------

Diffstat:

Makefile | 4 +-
arch/arm/boot/dts/am3517-evm.dts | 2 +-
arch/arm/boot/dts/am3517-som.dtsi | 2 +-
arch/arm/boot/dts/logicpd-som-lv.dtsi | 2 +-
arch/arm/boot/dts/logicpd-torpedo-37xx-devkit.dts | 2 +-
arch/arm/boot/dts/sama5d2.dtsi | 2 +-
arch/arm/mach-omap1/board-ams-delta.c | 3 +
arch/arm/mach-omap2/prm44xx.c | 2 +-
arch/arm64/boot/dts/qcom/sdm845-mtp.dts | 4 +
arch/s390/kernel/perf_cpum_cf.c | 2 +
arch/x86/kvm/lapic.c | 2 +-
arch/x86/kvm/vmx.c | 29 ++-
arch/x86/xen/enlighten.c | 78 --------
arch/x86/xen/setup.c | 6 +-
drivers/acpi/arm64/iort.c | 2 +-
drivers/fsi/Kconfig | 1 +
drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c | 7 +-
drivers/gpu/drm/ast/ast_mode.c | 36 +++-
drivers/gpu/drm/meson/meson_venc.c | 1 +
drivers/hwmon/ina2xx.c | 6 +-
drivers/hwmon/mlxreg-fan.c | 2 +-
drivers/hwmon/raspberrypi-hwmon.c | 6 -
drivers/hwmon/w83795.c | 2 +-
drivers/infiniband/core/roce_gid_mgmt.c | 6 +-
drivers/infiniband/hw/bnxt_re/main.c | 3 +
drivers/infiniband/hw/hfi1/chip.c | 3 +-
drivers/infiniband/hw/hfi1/hfi.h | 2 +
drivers/infiniband/hw/hfi1/verbs.c | 2 +-
drivers/infiniband/hw/hns/hns_roce_hw_v2.c | 128 ++++++-------
drivers/infiniband/hw/mlx5/odp.c | 1 +
drivers/infiniband/hw/mlx5/qp.c | 19 +-
drivers/infiniband/sw/rdmavt/ah.c | 4 +-
drivers/infiniband/sw/rdmavt/ah.h | 3 +-
drivers/net/ethernet/cavium/thunder/nic_main.c | 3 +
drivers/net/ethernet/hisilicon/hip04_eth.c | 4 +-
drivers/net/ethernet/ibm/emac/emac.h | 2 +-
drivers/net/ethernet/intel/igb/e1000_i210.c | 1 +
drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c | 4 +-
drivers/net/ethernet/mellanox/mlx4/en_ethtool.c | 4 +-
drivers/net/ethernet/mellanox/mlx4/en_netdev.c | 4 +-
drivers/net/ethernet/mellanox/mlx4/mlx4_en.h | 1 -
drivers/net/ethernet/realtek/8139cp.c | 5 +
drivers/net/phy/phy_device.c | 19 +-
drivers/net/phy/sfp-bus.c | 2 +-
drivers/net/tun.c | 6 +-
drivers/net/virtio_net.c | 14 +-
drivers/nvme/host/core.c | 4 +-
drivers/nvme/host/nvme.h | 3 +
drivers/nvme/host/rdma.c | 2 +
drivers/pci/controller/dwc/pci-imx6.c | 10 +-
drivers/phy/qualcomm/phy-qcom-qusb2.c | 20 +-
drivers/s390/cio/vfio_ccw_cp.c | 6 +-
drivers/spi/spi-omap2-mcspi.c | 37 ++--
drivers/staging/rtl8723bs/os_dep/ioctl_linux.c | 2 +-
drivers/thunderbolt/switch.c | 40 +++-
drivers/usb/gadget/function/u_ether.c | 11 +-
drivers/usb/gadget/udc/omap_udc.c | 88 +++------
drivers/xen/balloon.c | 65 +------
drivers/xen/pvcalls-front.c | 4 +-
drivers/xen/xlate_mmu.c | 1 +
fs/afs/inode.c | 18 +-
fs/aio.c | 1 +
fs/btrfs/send.c | 11 +-
fs/cachefiles/namei.c | 6 +-
fs/cachefiles/rdwr.c | 9 +-
fs/cachefiles/xattr.c | 3 +-
fs/dax.c | 2 +-
fs/exportfs/expfs.c | 2 +-
fs/fscache/object.c | 3 +
fs/hfs/btree.c | 3 +-
fs/hfsplus/btree.c | 3 +-
fs/nfs/flexfilelayout/flexfilelayout.c | 6 +-
fs/ocfs2/export.c | 2 +-
fs/ocfs2/move_extents.c | 47 ++---
fs/pstore/ram.c | 15 +-
fs/sysv/inode.c | 2 +-
include/linux/fscache-cache.h | 3 +-
include/linux/pstore.h | 5 +-
include/linux/skbuff.h | 11 ++
include/net/neighbour.h | 28 ++-
include/net/netfilter/ipv4/nf_nat_masquerade.h | 2 +-
include/net/netfilter/ipv6/nf_nat_masquerade.h | 2 +-
include/net/sctp/structs.h | 2 +
include/xen/balloon.h | 5 -
init/initramfs.c | 22 ++-
kernel/bpf/local_storage.c | 3 +-
kernel/bpf/verifier.c | 2 +-
kernel/kcov.c | 4 +-
kernel/trace/bpf_trace.c | 8 +-
lib/debugobjects.c | 5 +-
mm/page_alloc.c | 4 +-
net/core/dev.c | 61 +++---
net/core/rtnetlink.c | 3 +
net/ipv4/ip_fragment.c | 7 +
net/ipv4/ip_input.c | 4 +-
net/ipv4/netfilter/ipt_MASQUERADE.c | 7 +-
net/ipv4/netfilter/nf_nat_masquerade_ipv4.c | 38 +++-
net/ipv4/netfilter/nft_masq_ipv4.c | 4 +-
net/ipv4/tcp_output.c | 16 +-
net/ipv6/ip6_input.c | 4 +-
net/ipv6/ip6_output.c | 42 ++---
net/ipv6/netfilter.c | 3 +-
net/ipv6/netfilter/ip6t_MASQUERADE.c | 8 +-
net/ipv6/netfilter/nf_conntrack_reasm.c | 8 +-
net/ipv6/netfilter/nf_nat_masquerade_ipv6.c | 49 +++--
net/ipv6/netfilter/nft_masq_ipv6.c | 4 +-
net/ipv6/reassembly.c | 8 +-
net/ipv6/seg6_iptunnel.c | 1 +
net/netfilter/ipvs/ip_vs_ctl.c | 3 +
net/netfilter/nf_conncount.c | 44 +++--
net/netfilter/nf_tables_api.c | 29 +--
net/netfilter/nft_compat.c | 3 +-
net/netfilter/nft_flow_offload.c | 5 +-
net/netfilter/xt_RATEEST.c | 10 -
net/netfilter/xt_hashlimit.c | 9 +-
net/sched/sch_netem.c | 3 +
net/sctp/associola.c | 9 +-
net/sctp/sm_make_chunk.c | 3 +
sound/firewire/fireface/ff-protocol-ff400.c | 2 +-
sound/pci/hda/patch_realtek.c | 77 ++++++++
sound/soc/codecs/hdac_hdmi.c | 11 +-
sound/soc/codecs/wm_adsp.c | 37 ++--
sound/soc/intel/skylake/skl.c | 12 +-
sound/soc/omap/omap-abe-twl6040.c | 67 +++----
sound/soc/omap/omap-dmic.c | 9 +
sound/soc/omap/omap-mcbsp.c | 6 +-
sound/soc/omap/omap-mcpdm.c | 43 ++++-
sound/soc/qcom/common.c | 9 +-
sound/soc/qcom/qdsp6/q6afe-dai.c | 208 ++++++++++-----------
sound/soc/qcom/qdsp6/q6afe.c | 16 +-
sound/soc/rockchip/rockchip_pcm.c | 1 +
sound/soc/sh/rcar/ssi.c | 2 +-
sound/soc/soc-acpi.c | 10 +-
sound/soc/soc-core.c | 1 +
sound/soc/sunxi/sun8i-codec.c | 6 -
sound/usb/quirks-table.h | 10 +
tools/bpf/bpftool/common.c | 2 +-
tools/bpf/bpftool/prog.c | 10 +-
tools/objtool/elf.c | 19 +-
tools/perf/tests/attr/base-record | 2 +-
tools/perf/util/evsel.c | 2 +-
tools/perf/util/namespaces.c | 17 +-
tools/perf/util/namespaces.h | 1 +
tools/testing/selftests/Makefile | 1 +
tools/testing/selftests/bpf/test_verifier.c | 19 ++
tools/testing/selftests/netfilter/Makefile | 6 +
tools/testing/selftests/netfilter/config | 2 +
.../selftests/netfilter/nft_trans_stress.sh | 78 ++++++++
.../selftests/proc/proc-self-map-files-002.c | 9 +-
149 files changed, 1223 insertions(+), 832 deletions(-)




2018-12-14 12:02:47

by Greg Kroah-Hartman

[permalink] [raw]
Subject: [PATCH 4.19 001/142] ipv4: ipv6: netfilter: Adjust the frag mem limit when truesize changes

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

From: Jiri Wiesner <[email protected]>

[ Upstream commit ebaf39e6032faf77218220707fc3fa22487784e0 ]

The *_frag_reasm() functions are susceptible to miscalculating the byte
count of packet fragments in case the truesize of a head buffer changes.
The truesize member may be changed by the call to skb_unclone(), leaving
the fragment memory limit counter unbalanced even if all fragments are
processed. This miscalculation goes unnoticed as long as the network
namespace which holds the counter is not destroyed.

Should an attempt be made to destroy a network namespace that holds an
unbalanced fragment memory limit counter the cleanup of the namespace
never finishes. The thread handling the cleanup gets stuck in
inet_frags_exit_net() waiting for the percpu counter to reach zero. The
thread is usually in running state with a stacktrace similar to:

PID: 1073 TASK: ffff880626711440 CPU: 1 COMMAND: "kworker/u48:4"
#5 [ffff880621563d48] _raw_spin_lock at ffffffff815f5480
#6 [ffff880621563d48] inet_evict_bucket at ffffffff8158020b
#7 [ffff880621563d80] inet_frags_exit_net at ffffffff8158051c
#8 [ffff880621563db0] ops_exit_list at ffffffff814f5856
#9 [ffff880621563dd8] cleanup_net at ffffffff814f67c0
#10 [ffff880621563e38] process_one_work at ffffffff81096f14

It is not possible to create new network namespaces, and processes
that call unshare() end up being stuck in uninterruptible sleep state
waiting to acquire the net_mutex.

The bug was observed in the IPv6 netfilter code by Per Sundstrom.
I thank him for his analysis of the problem. The parts of this patch
that apply to IPv4 and IPv6 fragment reassembly are preemptive measures.

Signed-off-by: Jiri Wiesner <[email protected]>
Reported-by: Per Sundstrom <[email protected]>
Acked-by: Peter Oskolkov <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/ipv4/ip_fragment.c | 7 +++++++
net/ipv6/netfilter/nf_conntrack_reasm.c | 8 +++++++-
net/ipv6/reassembly.c | 8 +++++++-
3 files changed, 21 insertions(+), 2 deletions(-)

--- a/net/ipv4/ip_fragment.c
+++ b/net/ipv4/ip_fragment.c
@@ -513,6 +513,7 @@ static int ip_frag_reasm(struct ipq *qp,
struct rb_node *rbn;
int len;
int ihlen;
+ int delta;
int err;
u8 ecn;

@@ -554,10 +555,16 @@ static int ip_frag_reasm(struct ipq *qp,
if (len > 65535)
goto out_oversize;

+ delta = - head->truesize;
+
/* Head of list must not be cloned. */
if (skb_unclone(head, GFP_ATOMIC))
goto out_nomem;

+ delta += head->truesize;
+ if (delta)
+ add_frag_mem_limit(qp->q.net, delta);
+
/* If the first fragment is fragmented itself, we split
* it to two chunks: the first with data and paged part
* and the second, holding only fragments. */
--- a/net/ipv6/netfilter/nf_conntrack_reasm.c
+++ b/net/ipv6/netfilter/nf_conntrack_reasm.c
@@ -341,7 +341,7 @@ static bool
nf_ct_frag6_reasm(struct frag_queue *fq, struct sk_buff *prev, struct net_device *dev)
{
struct sk_buff *fp, *head = fq->q.fragments;
- int payload_len;
+ int payload_len, delta;
u8 ecn;

inet_frag_kill(&fq->q);
@@ -363,10 +363,16 @@ nf_ct_frag6_reasm(struct frag_queue *fq,
return false;
}

+ delta = - head->truesize;
+
/* Head of list must not be cloned. */
if (skb_unclone(head, GFP_ATOMIC))
return false;

+ delta += head->truesize;
+ if (delta)
+ add_frag_mem_limit(fq->q.net, delta);
+
/* If the first fragment is fragmented itself, we split
* it to two chunks: the first with data and paged part
* and the second, holding only fragments. */
--- a/net/ipv6/reassembly.c
+++ b/net/ipv6/reassembly.c
@@ -281,7 +281,7 @@ static int ip6_frag_reasm(struct frag_qu
{
struct net *net = container_of(fq->q.net, struct net, ipv6.frags);
struct sk_buff *fp, *head = fq->q.fragments;
- int payload_len;
+ int payload_len, delta;
unsigned int nhoff;
int sum_truesize;
u8 ecn;
@@ -322,10 +322,16 @@ static int ip6_frag_reasm(struct frag_qu
if (payload_len > IPV6_MAXPLEN)
goto out_oversize;

+ delta = - head->truesize;
+
/* Head of list must not be cloned. */
if (skb_unclone(head, GFP_ATOMIC))
goto out_oom;

+ delta += head->truesize;
+ if (delta)
+ add_frag_mem_limit(fq->q.net, delta);
+
/* If the first fragment is fragmented itself, we split
* it to two chunks: the first with data and paged part
* and the second, holding only fragments. */



2018-12-14 12:03:08

by Greg Kroah-Hartman

[permalink] [raw]
Subject: [PATCH 4.19 011/142] Revert "net/ibm/emac: wrong bit is used for STA control"

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

From: Benjamin Herrenschmidt <[email protected]>

[ Upstream commit 5b3279e2cba2238b37f6c18adfdea8bddb32715a ]

This reverts commit 624ca9c33c8a853a4a589836e310d776620f4ab9.

This commit is completely bogus. The STACR register has two formats, old
and new, depending on the version of the IP block used. There's a pair of
device-tree properties that can be used to specify the format used:

has-inverted-stacr-oc
has-new-stacr-staopc

What this commit did was to change the bit definition used with the old
parts to match the new parts. This of course breaks the driver on all
the old ones.

Instead, the author should have set the appropriate properties in the
device-tree for the variant used on his board.

Signed-off-by: Benjamin Herrenschmidt <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/ibm/emac/emac.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/net/ethernet/ibm/emac/emac.h
+++ b/drivers/net/ethernet/ibm/emac/emac.h
@@ -231,7 +231,7 @@ struct emac_regs {
#define EMAC_STACR_PHYE 0x00004000
#define EMAC_STACR_STAC_MASK 0x00003000
#define EMAC_STACR_STAC_READ 0x00001000
-#define EMAC_STACR_STAC_WRITE 0x00000800
+#define EMAC_STACR_STAC_WRITE 0x00002000
#define EMAC_STACR_OPBC_MASK 0x00000C00
#define EMAC_STACR_OPBC_50 0x00000000
#define EMAC_STACR_OPBC_66 0x00000400



2018-12-14 12:03:29

by Greg Kroah-Hartman

[permalink] [raw]
Subject: [PATCH 4.19 013/142] sctp: kfree_rcu asoc

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

From: Xin Long <[email protected]>

[ Upstream commit fb6df5a6234c38a9c551559506a49a677ac6f07a ]

In sctp_hash_transport/sctp_epaddr_lookup_transport, it dereferences
a transport's asoc under rcu_read_lock while asoc is freed not after
a grace period, which leads to a use-after-free panic.

This patch fixes it by calling kfree_rcu to make asoc be freed after
a grace period.

Note that only the asoc's memory is delayed to free in the patch, it
won't cause sk to linger longer.

Thanks Neil and Marcelo to make this clear.

Fixes: 7fda702f9315 ("sctp: use new rhlist interface on sctp transport rhashtable")
Fixes: cd2b70875058 ("sctp: check duplicate node before inserting a new transport")
Reported-by: [email protected]
Reported-by: [email protected]
Suggested-by: Neil Horman <[email protected]>
Signed-off-by: Xin Long <[email protected]>
Acked-by: Marcelo Ricardo Leitner <[email protected]>
Acked-by: Neil Horman <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
include/net/sctp/structs.h | 2 ++
net/sctp/associola.c | 2 +-
2 files changed, 3 insertions(+), 1 deletion(-)

--- a/include/net/sctp/structs.h
+++ b/include/net/sctp/structs.h
@@ -2075,6 +2075,8 @@ struct sctp_association {

__u64 abandoned_unsent[SCTP_PR_INDEX(MAX) + 1];
__u64 abandoned_sent[SCTP_PR_INDEX(MAX) + 1];
+
+ struct rcu_head rcu;
};


--- a/net/sctp/associola.c
+++ b/net/sctp/associola.c
@@ -434,7 +434,7 @@ static void sctp_association_destroy(str

WARN_ON(atomic_read(&asoc->rmem_alloc));

- kfree(asoc);
+ kfree_rcu(asoc, rcu);
SCTP_DBG_OBJCNT_DEC(assoc);
}




2018-12-14 12:03:49

by Greg Kroah-Hartman

[permalink] [raw]
Subject: [PATCH 4.19 003/142] neighbour: Avoid writing before skb->head in neigh_hh_output()

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

From: Stefano Brivio <[email protected]>

[ Upstream commit e6ac64d4c4d095085d7dd71cbd05704ac99829b2 ]

While skb_push() makes the kernel panic if the skb headroom is less than
the unaligned hardware header size, it will proceed normally in case we
copy more than that because of alignment, and we'll silently corrupt
adjacent slabs.

In the case fixed by the previous patch,
"ipv6: Check available headroom in ip6_xmit() even without options", we
end up in neigh_hh_output() with 14 bytes headroom, 14 bytes hardware
header and write 16 bytes, starting 2 bytes before the allocated buffer.

Always check we're not writing before skb->head and, if the headroom is
not enough, warn and drop the packet.

v2:
- instead of panicking with BUG_ON(), WARN_ON_ONCE() and drop the packet
(Eric Dumazet)
- if we avoid the panic, though, we need to explicitly check the headroom
before the memcpy(), otherwise we'll have corrupted slabs on a running
kernel, after we warn
- use __skb_push() instead of skb_push(), as the headroom check is
already implemented here explicitly (Eric Dumazet)

Signed-off-by: Stefano Brivio <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
include/net/neighbour.h | 28 +++++++++++++++++++++++-----
1 file changed, 23 insertions(+), 5 deletions(-)

--- a/include/net/neighbour.h
+++ b/include/net/neighbour.h
@@ -453,6 +453,7 @@ static inline int neigh_hh_bridge(struct

static inline int neigh_hh_output(const struct hh_cache *hh, struct sk_buff *skb)
{
+ unsigned int hh_alen = 0;
unsigned int seq;
unsigned int hh_len;

@@ -460,16 +461,33 @@ static inline int neigh_hh_output(const
seq = read_seqbegin(&hh->hh_lock);
hh_len = hh->hh_len;
if (likely(hh_len <= HH_DATA_MOD)) {
- /* this is inlined by gcc */
- memcpy(skb->data - HH_DATA_MOD, hh->hh_data, HH_DATA_MOD);
+ hh_alen = HH_DATA_MOD;
+
+ /* skb_push() would proceed silently if we have room for
+ * the unaligned size but not for the aligned size:
+ * check headroom explicitly.
+ */
+ if (likely(skb_headroom(skb) >= HH_DATA_MOD)) {
+ /* this is inlined by gcc */
+ memcpy(skb->data - HH_DATA_MOD, hh->hh_data,
+ HH_DATA_MOD);
+ }
} else {
- unsigned int hh_alen = HH_DATA_ALIGN(hh_len);
+ hh_alen = HH_DATA_ALIGN(hh_len);

- memcpy(skb->data - hh_alen, hh->hh_data, hh_alen);
+ if (likely(skb_headroom(skb) >= hh_alen)) {
+ memcpy(skb->data - hh_alen, hh->hh_data,
+ hh_alen);
+ }
}
} while (read_seqretry(&hh->hh_lock, seq));

- skb_push(skb, hh_len);
+ if (WARN_ON_ONCE(skb_headroom(skb) < hh_alen)) {
+ kfree_skb(skb);
+ return NET_XMIT_DROP;
+ }
+
+ __skb_push(skb, hh_len);
return dev_queue_xmit(skb);
}




2018-12-14 12:04:11

by Greg Kroah-Hartman

[permalink] [raw]
Subject: [PATCH 4.19 007/142] net/mlx4_en: Change min MTU size to ETH_MIN_MTU

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

From: Eran Ben Elisha <[email protected]>

[ Upstream commit 24be19e47779d604d1492c114459dca9a92acf78 ]

NIC driver minimal MTU size shall be set to ETH_MIN_MTU, as defined in
the RFC791 and in the network stack. Remove old mlx4_en only define for
it, which was set to wrong value.

Fixes: b80f71f5816f ("ethernet/mellanox: use core min/max MTU checking")
Signed-off-by: Eran Ben Elisha <[email protected]>
Signed-off-by: Tariq Toukan <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/mellanox/mlx4/en_netdev.c | 4 ++--
drivers/net/ethernet/mellanox/mlx4/mlx4_en.h | 1 -
2 files changed, 2 insertions(+), 3 deletions(-)

--- a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c
+++ b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c
@@ -3494,8 +3494,8 @@ int mlx4_en_init_netdev(struct mlx4_en_d
dev->gso_partial_features = NETIF_F_GSO_UDP_TUNNEL_CSUM;
}

- /* MTU range: 46 - hw-specific max */
- dev->min_mtu = MLX4_EN_MIN_MTU;
+ /* MTU range: 68 - hw-specific max */
+ dev->min_mtu = ETH_MIN_MTU;
dev->max_mtu = priv->max_mtu;

mdev->pndev[port] = dev;
--- a/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h
+++ b/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h
@@ -161,7 +161,6 @@
#define MLX4_SELFTEST_LB_MIN_MTU (MLX4_LOOPBACK_TEST_PAYLOAD + NET_IP_ALIGN + \
ETH_HLEN + PREAMBLE_LEN)

-#define MLX4_EN_MIN_MTU 46
/* VLAN_HLEN is added twice,to support skb vlan tagged with multiple
* headers. (For example: ETH_P_8021Q and ETH_P_8021AD).
*/



2018-12-14 12:04:20

by Greg Kroah-Hartman

[permalink] [raw]
Subject: [PATCH 4.19 009/142] net: Prevent invalid access to skb->prev in __qdisc_drop_all

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

From: Christoph Paasch <[email protected]>

[ Upstream commit 9410d386d0a829ace9558336263086c2fbbe8aed ]

__qdisc_drop_all() accesses skb->prev to get to the tail of the
segment-list.

With commit 68d2f84a1368 ("net: gro: properly remove skb from list")
the skb-list handling has been changed to set skb->next to NULL and set
the list-poison on skb->prev.

With that change, __qdisc_drop_all() will panic when it tries to
dereference skb->prev.

Since commit 992cba7e276d ("net: Add and use skb_list_del_init().")
__list_del_entry is used, leaving skb->prev unchanged (thus,
pointing to the list-head if it's the first skb of the list).
This will make __qdisc_drop_all modify the next-pointer of the list-head
and result in a panic later on:

[ 34.501053] general protection fault: 0000 [#1] SMP KASAN PTI
[ 34.501968] CPU: 2 PID: 0 Comm: swapper/2 Not tainted 4.20.0-rc2.mptcp #108
[ 34.502887] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 0.5.1 01/01/2011
[ 34.504074] RIP: 0010:dev_gro_receive+0x343/0x1f90
[ 34.504751] Code: e0 48 c1 e8 03 42 80 3c 30 00 0f 85 4a 1c 00 00 4d 8b 24 24 4c 39 65 d0 0f 84 0a 04 00 00 49 8d 7c 24 38 48 89 f8 48 c1 e8 03 <42> 0f b6 04 30 84 c0 74 08 3c 04
[ 34.507060] RSP: 0018:ffff8883af507930 EFLAGS: 00010202
[ 34.507761] RAX: 0000000000000007 RBX: ffff8883970b2c80 RCX: 1ffff11072e165a6
[ 34.508640] RDX: 1ffff11075867008 RSI: ffff8883ac338040 RDI: 0000000000000038
[ 34.509493] RBP: ffff8883af5079d0 R08: ffff8883970b2d40 R09: 0000000000000062
[ 34.510346] R10: 0000000000000034 R11: 0000000000000000 R12: 0000000000000000
[ 34.511215] R13: 0000000000000000 R14: dffffc0000000000 R15: ffff8883ac338008
[ 34.512082] FS: 0000000000000000(0000) GS:ffff8883af500000(0000) knlGS:0000000000000000
[ 34.513036] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 34.513741] CR2: 000055ccc3e9d020 CR3: 00000003abf32000 CR4: 00000000000006e0
[ 34.514593] Call Trace:
[ 34.514893] <IRQ>
[ 34.515157] napi_gro_receive+0x93/0x150
[ 34.515632] receive_buf+0x893/0x3700
[ 34.516094] ? __netif_receive_skb+0x1f/0x1a0
[ 34.516629] ? virtnet_probe+0x1b40/0x1b40
[ 34.517153] ? __stable_node_chain+0x4d0/0x850
[ 34.517684] ? kfree+0x9a/0x180
[ 34.518067] ? __kasan_slab_free+0x171/0x190
[ 34.518582] ? detach_buf+0x1df/0x650
[ 34.519061] ? lapic_next_event+0x5a/0x90
[ 34.519539] ? virtqueue_get_buf_ctx+0x280/0x7f0
[ 34.520093] virtnet_poll+0x2df/0xd60
[ 34.520533] ? receive_buf+0x3700/0x3700
[ 34.521027] ? qdisc_watchdog_schedule_ns+0xd5/0x140
[ 34.521631] ? htb_dequeue+0x1817/0x25f0
[ 34.522107] ? sch_direct_xmit+0x142/0xf30
[ 34.522595] ? virtqueue_napi_schedule+0x26/0x30
[ 34.523155] net_rx_action+0x2f6/0xc50
[ 34.523601] ? napi_complete_done+0x2f0/0x2f0
[ 34.524126] ? kasan_check_read+0x11/0x20
[ 34.524608] ? _raw_spin_lock+0x7d/0xd0
[ 34.525070] ? _raw_spin_lock_bh+0xd0/0xd0
[ 34.525563] ? kvm_guest_apic_eoi_write+0x6b/0x80
[ 34.526130] ? apic_ack_irq+0x9e/0xe0
[ 34.526567] __do_softirq+0x188/0x4b5
[ 34.527015] irq_exit+0x151/0x180
[ 34.527417] do_IRQ+0xdb/0x150
[ 34.527783] common_interrupt+0xf/0xf
[ 34.528223] </IRQ>

This patch makes sure that skb->prev is set to NULL when entering
netem_enqueue.

Cc: Prashant Bhole <[email protected]>
Cc: Tyler Hicks <[email protected]>
Cc: Eric Dumazet <[email protected]>
Fixes: 68d2f84a1368 ("net: gro: properly remove skb from list")
Suggested-by: Eric Dumazet <[email protected]>
Signed-off-by: Christoph Paasch <[email protected]>
Reviewed-by: Eric Dumazet <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/sched/sch_netem.c | 3 +++
1 file changed, 3 insertions(+)

--- a/net/sched/sch_netem.c
+++ b/net/sched/sch_netem.c
@@ -441,6 +441,9 @@ static int netem_enqueue(struct sk_buff
int count = 1;
int rc = NET_XMIT_SUCCESS;

+ /* Do not fool qdisc_drop_all() */
+ skb->prev = NULL;
+
/* Random duplication */
if (q->duplicate && q->duplicate >= get_crandom(&q->dup_cor))
++count;



2018-12-14 12:04:22

by Greg Kroah-Hartman

[permalink] [raw]
Subject: [PATCH 4.19 008/142] net: phy: dont allow __set_phy_supported to add unsupported modes

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

From: Heiner Kallweit <[email protected]>

[ Upstream commit d2a36971ef595069b7a600d1144c2e0881a930a1 ]

Currently __set_phy_supported allows to add modes w/o checking whether
the PHY supports them. This is wrong, it should never add modes but
only remove modes we don't want to support.

The commit marked as fixed didn't do anything wrong, it just copied
existing functionality to the helper which is being fixed now.

Fixes: f3a6bd393c2c ("phylib: Add phy_set_max_speed helper")
Signed-off-by: Heiner Kallweit <[email protected]>
Reviewed-by: Andrew Lunn <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/phy/phy_device.c | 19 ++++++++-----------
1 file changed, 8 insertions(+), 11 deletions(-)

--- a/drivers/net/phy/phy_device.c
+++ b/drivers/net/phy/phy_device.c
@@ -1738,20 +1738,17 @@ EXPORT_SYMBOL(genphy_loopback);

static int __set_phy_supported(struct phy_device *phydev, u32 max_speed)
{
- phydev->supported &= ~(PHY_1000BT_FEATURES | PHY_100BT_FEATURES |
- PHY_10BT_FEATURES);
-
switch (max_speed) {
- default:
- return -ENOTSUPP;
- case SPEED_1000:
- phydev->supported |= PHY_1000BT_FEATURES;
+ case SPEED_10:
+ phydev->supported &= ~PHY_100BT_FEATURES;
/* fall through */
case SPEED_100:
- phydev->supported |= PHY_100BT_FEATURES;
- /* fall through */
- case SPEED_10:
- phydev->supported |= PHY_10BT_FEATURES;
+ phydev->supported &= ~PHY_1000BT_FEATURES;
+ break;
+ case SPEED_1000:
+ break;
+ default:
+ return -ENOTSUPP;
}

return 0;



2018-12-14 12:04:44

by Greg Kroah-Hartman

[permalink] [raw]
Subject: [PATCH 4.19 031/142] ARM: OMAP1: ams-delta: Fix possible use of uninitialized field

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit cec83ff1241ec98113a19385ea9e9cfa9aa4125b ]

While playing with initialization order of modem device, it has been
discovered that under some circumstances (early console init, I
believe) its .pm() callback may be called before the
uart_port->private_data pointer is initialized from
plat_serial8250_port->private_data, resulting in NULL pointer
dereference. Fix it by checking for uninitialized pointer before using
it in modem_pm().

Fixes: aabf31737a6a ("ARM: OMAP1: ams-delta: update the modem to use regulator API")
Signed-off-by: Janusz Krzysztofik <[email protected]>
Signed-off-by: Tony Lindgren <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm/mach-omap1/board-ams-delta.c | 3 +++
1 file changed, 3 insertions(+)

diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c
index dd28d2614d7f..d10d8831f527 100644
--- a/arch/arm/mach-omap1/board-ams-delta.c
+++ b/arch/arm/mach-omap1/board-ams-delta.c
@@ -726,6 +726,9 @@ static void modem_pm(struct uart_port *port, unsigned int state, unsigned old)
struct modem_private_data *priv = port->private_data;
int ret;

+ if (!priv)
+ return;
+
if (IS_ERR(priv->regulator))
return;

--
2.19.1




2018-12-14 12:04:46

by Greg Kroah-Hartman

[permalink] [raw]
Subject: [PATCH 4.19 040/142] selftests: add script to stress-test nft packet path vs. control plane

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit 25d8bcedbf4329895dbaf9dd67baa6f18dad918c ]

Start flood ping for each cpu while loading/flushing rulesets to make
sure we do not access already-free'd rules from nf_tables evaluation loop.

Also add this to TARGETS so 'make run_tests' in selftest dir runs it
automatically.

This would have caught the bug fixed in previous change
("netfilter: nf_tables: do not skip inactive chains during generation update")
sooner.

Signed-off-by: Florian Westphal <[email protected]>
Signed-off-by: Pablo Neira Ayuso <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
tools/testing/selftests/Makefile | 1 +
tools/testing/selftests/netfilter/Makefile | 6 ++
tools/testing/selftests/netfilter/config | 2 +
.../selftests/netfilter/nft_trans_stress.sh | 78 +++++++++++++++++++
4 files changed, 87 insertions(+)
create mode 100644 tools/testing/selftests/netfilter/Makefile
create mode 100644 tools/testing/selftests/netfilter/config
create mode 100755 tools/testing/selftests/netfilter/nft_trans_stress.sh

diff --git a/tools/testing/selftests/Makefile b/tools/testing/selftests/Makefile
index f1fe492c8e17..f0017c831e57 100644
--- a/tools/testing/selftests/Makefile
+++ b/tools/testing/selftests/Makefile
@@ -24,6 +24,7 @@ TARGETS += memory-hotplug
TARGETS += mount
TARGETS += mqueue
TARGETS += net
+TARGETS += netfilter
TARGETS += nsfs
TARGETS += powerpc
TARGETS += proc
diff --git a/tools/testing/selftests/netfilter/Makefile b/tools/testing/selftests/netfilter/Makefile
new file mode 100644
index 000000000000..47ed6cef93fb
--- /dev/null
+++ b/tools/testing/selftests/netfilter/Makefile
@@ -0,0 +1,6 @@
+# SPDX-License-Identifier: GPL-2.0
+# Makefile for netfilter selftests
+
+TEST_PROGS := nft_trans_stress.sh
+
+include ../lib.mk
diff --git a/tools/testing/selftests/netfilter/config b/tools/testing/selftests/netfilter/config
new file mode 100644
index 000000000000..1017313e41a8
--- /dev/null
+++ b/tools/testing/selftests/netfilter/config
@@ -0,0 +1,2 @@
+CONFIG_NET_NS=y
+NF_TABLES_INET=y
diff --git a/tools/testing/selftests/netfilter/nft_trans_stress.sh b/tools/testing/selftests/netfilter/nft_trans_stress.sh
new file mode 100755
index 000000000000..f1affd12c4b1
--- /dev/null
+++ b/tools/testing/selftests/netfilter/nft_trans_stress.sh
@@ -0,0 +1,78 @@
+#!/bin/bash
+#
+# This test is for stress-testing the nf_tables config plane path vs.
+# packet path processing: Make sure we never release rules that are
+# still visible to other cpus.
+#
+# set -e
+
+# Kselftest framework requirement - SKIP code is 4.
+ksft_skip=4
+
+testns=testns1
+tables="foo bar baz quux"
+
+nft --version > /dev/null 2>&1
+if [ $? -ne 0 ];then
+ echo "SKIP: Could not run test without nft tool"
+ exit $ksft_skip
+fi
+
+ip -Version > /dev/null 2>&1
+if [ $? -ne 0 ];then
+ echo "SKIP: Could not run test without ip tool"
+ exit $ksft_skip
+fi
+
+tmp=$(mktemp)
+
+for table in $tables; do
+ echo add table inet "$table" >> "$tmp"
+ echo flush table inet "$table" >> "$tmp"
+
+ echo "add chain inet $table INPUT { type filter hook input priority 0; }" >> "$tmp"
+ echo "add chain inet $table OUTPUT { type filter hook output priority 0; }" >> "$tmp"
+ for c in $(seq 1 400); do
+ chain=$(printf "chain%03u" "$c")
+ echo "add chain inet $table $chain" >> "$tmp"
+ done
+
+ for c in $(seq 1 400); do
+ chain=$(printf "chain%03u" "$c")
+ for BASE in INPUT OUTPUT; do
+ echo "add rule inet $table $BASE counter jump $chain" >> "$tmp"
+ done
+ echo "add rule inet $table $chain counter return" >> "$tmp"
+ done
+done
+
+ip netns add "$testns"
+ip -netns "$testns" link set lo up
+
+lscpu | grep ^CPU\(s\): | ( read cpu cpunum ;
+cpunum=$((cpunum-1))
+for i in $(seq 0 $cpunum);do
+ mask=$(printf 0x%x $((1<<$i)))
+ ip netns exec "$testns" taskset $mask ping -4 127.0.0.1 -fq > /dev/null &
+ ip netns exec "$testns" taskset $mask ping -6 ::1 -fq > /dev/null &
+done)
+
+sleep 1
+
+for i in $(seq 1 10) ; do ip netns exec "$testns" nft -f "$tmp" & done
+
+for table in $tables;do
+ randsleep=$((RANDOM%10))
+ sleep $randsleep
+ ip netns exec "$testns" nft delete table inet $table 2>/dev/null
+done
+
+randsleep=$((RANDOM%10))
+sleep $randsleep
+
+pkill -9 ping
+
+wait
+
+rm -f "$tmp"
+ip netns del "$testns"
--
2.19.1




2018-12-14 12:04:49

by Greg Kroah-Hartman

[permalink] [raw]
Subject: [PATCH 4.19 033/142] ASoC: sun8i-codec: fix crash on module removal

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit 278df5e5527b633f4882f1680ad58b62a7c07bfe ]

drvdata is actually sun8i_codec, not snd_soc_card, so it crashes
when calling snd_soc_card_get_drvdata().

Drop card and scodec vars anyway since we don't need to
disable/unprepare clocks - it's already done by calling
runtime_suspend()

Drop clk_disable_unprepare() calls for the same reason.

Fixes: 36c684936fae7 ("ASoC: Add sun8i digital audio codec")
Signed-off-by: Vasily Khoruzhick <[email protected]>
Acked-by: Maxime Ripard <[email protected]>
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/soc/sunxi/sun8i-codec.c | 6 ------
1 file changed, 6 deletions(-)

diff --git a/sound/soc/sunxi/sun8i-codec.c b/sound/soc/sunxi/sun8i-codec.c
index fb37dd927e33..bf615fa16dc8 100644
--- a/sound/soc/sunxi/sun8i-codec.c
+++ b/sound/soc/sunxi/sun8i-codec.c
@@ -589,16 +589,10 @@ static int sun8i_codec_probe(struct platform_device *pdev)

static int sun8i_codec_remove(struct platform_device *pdev)
{
- struct snd_soc_card *card = platform_get_drvdata(pdev);
- struct sun8i_codec *scodec = snd_soc_card_get_drvdata(card);
-
pm_runtime_disable(&pdev->dev);
if (!pm_runtime_status_suspended(&pdev->dev))
sun8i_codec_runtime_suspend(&pdev->dev);

- clk_disable_unprepare(scodec->clk_module);
- clk_disable_unprepare(scodec->clk_bus);
-
return 0;
}

--
2.19.1




2018-12-14 12:04:52

by Greg Kroah-Hartman

[permalink] [raw]
Subject: [PATCH 4.19 035/142] sysv: return err instead of 0 in __sysv_write_inode

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit c4b7d1ba7d263b74bb72e9325262a67139605cde ]

Fixes gcc '-Wunused-but-set-variable' warning:

fs/sysv/inode.c: In function '__sysv_write_inode':
fs/sysv/inode.c:239:6: warning:
variable 'err' set but not used [-Wunused-but-set-variable]

__sysv_write_inode should return 'err' instead of 0

Fixes: 05459ca81ac3 ("repair sysv_write_inode(), switch sysv to simple_fsync()")
Signed-off-by: YueHaibing <[email protected]>
Signed-off-by: Al Viro <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/sysv/inode.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/fs/sysv/inode.c b/fs/sysv/inode.c
index 499a20a5a010..273736f41be3 100644
--- a/fs/sysv/inode.c
+++ b/fs/sysv/inode.c
@@ -275,7 +275,7 @@ static int __sysv_write_inode(struct inode *inode, int wait)
}
}
brelse(bh);
- return 0;
+ return err;
}

int sysv_write_inode(struct inode *inode, struct writeback_control *wbc)
--
2.19.1




2018-12-14 12:04:53

by Greg Kroah-Hartman

[permalink] [raw]
Subject: [PATCH 4.19 038/142] netfilter: nf_conncount: fix unexpected permanent node of list.

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit 3c5cdb17c3be76714dfd0d03e384f70579545614 ]

When list->count is 0, the list is deleted by GC. But list->count is
never reached 0 because initial count value is 1 and it is increased
when node is inserted. So that initial value of list->count should be 0.

Originally GC always finds zero count list through deleting node and
decreasing count. However, list may be left empty since node insertion
may fail eg. allocaton problem. In order to solve this problem, GC
routine also finds zero count list without deleting node.

Fixes: cb2b36f5a97d ("netfilter: nf_conncount: Switch to plain list")
Signed-off-by: Taehee Yoo <[email protected]>
Signed-off-by: Pablo Neira Ayuso <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/netfilter/nf_conncount.c | 18 +++++++++++++++---
1 file changed, 15 insertions(+), 3 deletions(-)

diff --git a/net/netfilter/nf_conncount.c b/net/netfilter/nf_conncount.c
index cb33709138df..8acae4a3e4c0 100644
--- a/net/netfilter/nf_conncount.c
+++ b/net/netfilter/nf_conncount.c
@@ -144,8 +144,10 @@ static bool conn_free(struct nf_conncount_list *list,
list->count--;
conn->dead = true;
list_del_rcu(&conn->node);
- if (list->count == 0)
+ if (list->count == 0) {
+ list->dead = true;
free_entry = true;
+ }

spin_unlock_bh(&list->list_lock);
call_rcu(&conn->rcu_head, __conn_free);
@@ -248,7 +250,7 @@ void nf_conncount_list_init(struct nf_conncount_list *list)
{
spin_lock_init(&list->list_lock);
INIT_LIST_HEAD(&list->head);
- list->count = 1;
+ list->count = 0;
list->dead = false;
}
EXPORT_SYMBOL_GPL(nf_conncount_list_init);
@@ -262,6 +264,7 @@ bool nf_conncount_gc_list(struct net *net,
struct nf_conn *found_ct;
unsigned int collected = 0;
bool free_entry = false;
+ bool ret = false;

list_for_each_entry_safe(conn, conn_n, &list->head, node) {
found = find_or_evict(net, list, conn, &free_entry);
@@ -291,7 +294,15 @@ bool nf_conncount_gc_list(struct net *net,
if (collected > CONNCOUNT_GC_MAX_NODES)
return false;
}
- return false;
+
+ spin_lock_bh(&list->list_lock);
+ if (!list->count) {
+ list->dead = true;
+ ret = true;
+ }
+ spin_unlock_bh(&list->list_lock);
+
+ return ret;
}
EXPORT_SYMBOL_GPL(nf_conncount_gc_list);

@@ -417,6 +428,7 @@ insert_tree(struct net *net,
nf_conncount_list_init(&rbconn->list);
list_add(&conn->node, &rbconn->list.head);
count = 1;
+ rbconn->list.count = count;

rb_link_node(&rbconn->node, parent, rbnode);
rb_insert_color(&rbconn->node, root);
--
2.19.1




2018-12-14 12:04:55

by Greg Kroah-Hartman

[permalink] [raw]
Subject: [PATCH 4.19 022/142] ARM: OMAP2+: prm44xx: Fix section annotation on omap44xx_prm_enable_io_wakeup

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit eef3dc34a1e0b01d53328b88c25237bcc7323777 ]

When building the kernel with Clang, the following section mismatch
warning appears:

WARNING: vmlinux.o(.text+0x38b3c): Section mismatch in reference from
the function omap44xx_prm_late_init() to the function
.init.text:omap44xx_prm_enable_io_wakeup()
The function omap44xx_prm_late_init() references
the function __init omap44xx_prm_enable_io_wakeup().
This is often because omap44xx_prm_late_init lacks a __init
annotation or the annotation of omap44xx_prm_enable_io_wakeup is wrong.

Remove the __init annotation from omap44xx_prm_enable_io_wakeup so there
is no more mismatch.

Signed-off-by: Nathan Chancellor <[email protected]>
Signed-off-by: Tony Lindgren <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm/mach-omap2/prm44xx.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/mach-omap2/prm44xx.c b/arch/arm/mach-omap2/prm44xx.c
index 7b95729e8359..38a1be6c3694 100644
--- a/arch/arm/mach-omap2/prm44xx.c
+++ b/arch/arm/mach-omap2/prm44xx.c
@@ -351,7 +351,7 @@ static void omap44xx_prm_reconfigure_io_chain(void)
* to occur, WAKEUPENABLE bits must be set in the pad mux registers, and
* omap44xx_prm_reconfigure_io_chain() must be called. No return value.
*/
-static void __init omap44xx_prm_enable_io_wakeup(void)
+static void omap44xx_prm_enable_io_wakeup(void)
{
s32 inst = omap4_prmst_get_prm_dev_inst();

--
2.19.1




2018-12-14 12:05:00

by Greg Kroah-Hartman

[permalink] [raw]
Subject: [PATCH 4.19 041/142] perf tools: Fix crash on synthesizing the unit

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit fb50c09e923870a358d68b0d58891bd145b8d7c7 ]

Adam reported a record command crash for simple session like:

$ perf record -e cpu-clock ls

with following backtrace:

Program received signal SIGSEGV, Segmentation fault.
3543 ev = event_update_event__new(size + 1, PERF_EVENT_UPDATE__UNIT, evsel->id[0]);
(gdb) bt
#0 perf_event__synthesize_event_update_unit
#1 0x000000000051e469 in perf_event__synthesize_extra_attr
#2 0x00000000004445cb in record__synthesize
#3 0x0000000000444bc5 in __cmd_record
...

We synthesize an update event that needs to touch the evsel id array,
which is not defined at that time. Fix this by forcing the id allocation
for events with their unit defined.

Reflecting possible read_format ID bit in the attr tests.

Reported-by: Yongxin Liu <[email protected]>
Signed-off-by: Jiri Olsa <[email protected]>
Cc: Adam Lee <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=201477
Fixes: bfd8f72c2778 ("perf record: Synthesize unit/scale/... in event update")
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
tools/perf/tests/attr/base-record | 2 +-
tools/perf/util/evsel.c | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/tools/perf/tests/attr/base-record b/tools/perf/tests/attr/base-record
index 37940665f736..efd0157b9d22 100644
--- a/tools/perf/tests/attr/base-record
+++ b/tools/perf/tests/attr/base-record
@@ -9,7 +9,7 @@ size=112
config=0
sample_period=*
sample_type=263
-read_format=0
+read_format=0|4
disabled=1
inherit=1
pinned=0
diff --git a/tools/perf/util/evsel.c b/tools/perf/util/evsel.c
index 03a72310315f..e7dbdcc8d465 100644
--- a/tools/perf/util/evsel.c
+++ b/tools/perf/util/evsel.c
@@ -1088,7 +1088,7 @@ void perf_evsel__config(struct perf_evsel *evsel, struct record_opts *opts,
attr->exclude_user = 1;
}

- if (evsel->own_cpus)
+ if (evsel->own_cpus || evsel->unit)
evsel->attr.read_format |= PERF_FORMAT_ID;

/*
--
2.19.1




2018-12-14 12:05:01

by Greg Kroah-Hartman

[permalink] [raw]
Subject: [PATCH 4.19 025/142] ASoC: qdsp6: q6afe-dai: Fix the dai widgets

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit e14856f6cfbb1b96aa45a68f188b147b5bde76b4 ]

For some reason the dapm widgets are incorrectly defined from the start,
Not sure how we ended up with such thing. Fix them now!

Without this fix the backend dais are always powered up even if there
is no active stream.

Reported-by: Jimmy Cheng-Yi Chiang <[email protected]>
Reported-by: Rohit kumar <[email protected]>
Signed-off-by: Srinivas Kandagatla <[email protected]>
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/soc/qcom/qdsp6/q6afe-dai.c | 208 +++++++++++++++----------------
1 file changed, 104 insertions(+), 104 deletions(-)

diff --git a/sound/soc/qcom/qdsp6/q6afe-dai.c b/sound/soc/qcom/qdsp6/q6afe-dai.c
index 60ff4a2d3577..8f6c8fc073a9 100644
--- a/sound/soc/qcom/qdsp6/q6afe-dai.c
+++ b/sound/soc/qcom/qdsp6/q6afe-dai.c
@@ -1112,204 +1112,204 @@ static int q6afe_of_xlate_dai_name(struct snd_soc_component *component,
}

static const struct snd_soc_dapm_widget q6afe_dai_widgets[] = {
- SND_SOC_DAPM_AIF_OUT("HDMI_RX", "HDMI Playback", 0, 0, 0, 0),
- SND_SOC_DAPM_AIF_OUT("SLIMBUS_0_RX", "Slimbus Playback", 0, 0, 0, 0),
- SND_SOC_DAPM_AIF_OUT("SLIMBUS_1_RX", "Slimbus1 Playback", 0, 0, 0, 0),
- SND_SOC_DAPM_AIF_OUT("SLIMBUS_2_RX", "Slimbus2 Playback", 0, 0, 0, 0),
- SND_SOC_DAPM_AIF_OUT("SLIMBUS_3_RX", "Slimbus3 Playback", 0, 0, 0, 0),
- SND_SOC_DAPM_AIF_OUT("SLIMBUS_4_RX", "Slimbus4 Playback", 0, 0, 0, 0),
- SND_SOC_DAPM_AIF_OUT("SLIMBUS_5_RX", "Slimbus5 Playback", 0, 0, 0, 0),
- SND_SOC_DAPM_AIF_OUT("SLIMBUS_6_RX", "Slimbus6 Playback", 0, 0, 0, 0),
- SND_SOC_DAPM_AIF_IN("SLIMBUS_0_TX", "Slimbus Capture", 0, 0, 0, 0),
- SND_SOC_DAPM_AIF_IN("SLIMBUS_1_TX", "Slimbus1 Capture", 0, 0, 0, 0),
- SND_SOC_DAPM_AIF_IN("SLIMBUS_2_TX", "Slimbus2 Capture", 0, 0, 0, 0),
- SND_SOC_DAPM_AIF_IN("SLIMBUS_3_TX", "Slimbus3 Capture", 0, 0, 0, 0),
- SND_SOC_DAPM_AIF_IN("SLIMBUS_4_TX", "Slimbus4 Capture", 0, 0, 0, 0),
- SND_SOC_DAPM_AIF_IN("SLIMBUS_5_TX", "Slimbus5 Capture", 0, 0, 0, 0),
- SND_SOC_DAPM_AIF_IN("SLIMBUS_6_TX", "Slimbus6 Capture", 0, 0, 0, 0),
- SND_SOC_DAPM_AIF_OUT("QUAT_MI2S_RX", "Quaternary MI2S Playback",
+ SND_SOC_DAPM_AIF_IN("HDMI_RX", NULL, 0, 0, 0, 0),
+ SND_SOC_DAPM_AIF_IN("SLIMBUS_0_RX", NULL, 0, 0, 0, 0),
+ SND_SOC_DAPM_AIF_IN("SLIMBUS_1_RX", NULL, 0, 0, 0, 0),
+ SND_SOC_DAPM_AIF_IN("SLIMBUS_2_RX", NULL, 0, 0, 0, 0),
+ SND_SOC_DAPM_AIF_IN("SLIMBUS_3_RX", NULL, 0, 0, 0, 0),
+ SND_SOC_DAPM_AIF_IN("SLIMBUS_4_RX", NULL, 0, 0, 0, 0),
+ SND_SOC_DAPM_AIF_IN("SLIMBUS_5_RX", NULL, 0, 0, 0, 0),
+ SND_SOC_DAPM_AIF_IN("SLIMBUS_6_RX", NULL, 0, 0, 0, 0),
+ SND_SOC_DAPM_AIF_OUT("SLIMBUS_0_TX", NULL, 0, 0, 0, 0),
+ SND_SOC_DAPM_AIF_OUT("SLIMBUS_1_TX", NULL, 0, 0, 0, 0),
+ SND_SOC_DAPM_AIF_OUT("SLIMBUS_2_TX", NULL, 0, 0, 0, 0),
+ SND_SOC_DAPM_AIF_OUT("SLIMBUS_3_TX", NULL, 0, 0, 0, 0),
+ SND_SOC_DAPM_AIF_OUT("SLIMBUS_4_TX", NULL, 0, 0, 0, 0),
+ SND_SOC_DAPM_AIF_OUT("SLIMBUS_5_TX", NULL, 0, 0, 0, 0),
+ SND_SOC_DAPM_AIF_OUT("SLIMBUS_6_TX", NULL, 0, 0, 0, 0),
+ SND_SOC_DAPM_AIF_IN("QUAT_MI2S_RX", NULL,
0, 0, 0, 0),
- SND_SOC_DAPM_AIF_IN("QUAT_MI2S_TX", "Quaternary MI2S Capture",
+ SND_SOC_DAPM_AIF_OUT("QUAT_MI2S_TX", NULL,
0, 0, 0, 0),
- SND_SOC_DAPM_AIF_OUT("TERT_MI2S_RX", "Tertiary MI2S Playback",
+ SND_SOC_DAPM_AIF_IN("TERT_MI2S_RX", NULL,
0, 0, 0, 0),
- SND_SOC_DAPM_AIF_IN("TERT_MI2S_TX", "Tertiary MI2S Capture",
+ SND_SOC_DAPM_AIF_OUT("TERT_MI2S_TX", NULL,
0, 0, 0, 0),
- SND_SOC_DAPM_AIF_OUT("SEC_MI2S_RX", "Secondary MI2S Playback",
+ SND_SOC_DAPM_AIF_IN("SEC_MI2S_RX", NULL,
0, 0, 0, 0),
- SND_SOC_DAPM_AIF_IN("SEC_MI2S_TX", "Secondary MI2S Capture",
+ SND_SOC_DAPM_AIF_OUT("SEC_MI2S_TX", NULL,
0, 0, 0, 0),
- SND_SOC_DAPM_AIF_OUT("SEC_MI2S_RX_SD1",
+ SND_SOC_DAPM_AIF_IN("SEC_MI2S_RX_SD1",
"Secondary MI2S Playback SD1",
0, 0, 0, 0),
- SND_SOC_DAPM_AIF_OUT("PRI_MI2S_RX", "Primary MI2S Playback",
+ SND_SOC_DAPM_AIF_IN("PRI_MI2S_RX", NULL,
0, 0, 0, 0),
- SND_SOC_DAPM_AIF_IN("PRI_MI2S_TX", "Primary MI2S Capture",
+ SND_SOC_DAPM_AIF_OUT("PRI_MI2S_TX", NULL,
0, 0, 0, 0),

- SND_SOC_DAPM_AIF_OUT("PRIMARY_TDM_RX_0", "Primary TDM0 Playback",
+ SND_SOC_DAPM_AIF_IN("PRIMARY_TDM_RX_0", NULL,
0, 0, 0, 0),
- SND_SOC_DAPM_AIF_OUT("PRIMARY_TDM_RX_1", "Primary TDM1 Playback",
+ SND_SOC_DAPM_AIF_IN("PRIMARY_TDM_RX_1", NULL,
0, 0, 0, 0),
- SND_SOC_DAPM_AIF_OUT("PRIMARY_TDM_RX_2", "Primary TDM2 Playback",
+ SND_SOC_DAPM_AIF_IN("PRIMARY_TDM_RX_2", NULL,
0, 0, 0, 0),
- SND_SOC_DAPM_AIF_OUT("PRIMARY_TDM_RX_3", "Primary TDM3 Playback",
+ SND_SOC_DAPM_AIF_IN("PRIMARY_TDM_RX_3", NULL,
0, 0, 0, 0),
- SND_SOC_DAPM_AIF_OUT("PRIMARY_TDM_RX_4", "Primary TDM4 Playback",
+ SND_SOC_DAPM_AIF_IN("PRIMARY_TDM_RX_4", NULL,
0, 0, 0, 0),
- SND_SOC_DAPM_AIF_OUT("PRIMARY_TDM_RX_5", "Primary TDM5 Playback",
+ SND_SOC_DAPM_AIF_IN("PRIMARY_TDM_RX_5", NULL,
0, 0, 0, 0),
- SND_SOC_DAPM_AIF_OUT("PRIMARY_TDM_RX_6", "Primary TDM6 Playback",
+ SND_SOC_DAPM_AIF_IN("PRIMARY_TDM_RX_6", NULL,
0, 0, 0, 0),
- SND_SOC_DAPM_AIF_OUT("PRIMARY_TDM_RX_7", "Primary TDM7 Playback",
+ SND_SOC_DAPM_AIF_IN("PRIMARY_TDM_RX_7", NULL,
0, 0, 0, 0),
- SND_SOC_DAPM_AIF_IN("PRIMARY_TDM_TX_0", "Primary TDM0 Capture",
+ SND_SOC_DAPM_AIF_OUT("PRIMARY_TDM_TX_0", NULL,
0, 0, 0, 0),
- SND_SOC_DAPM_AIF_IN("PRIMARY_TDM_TX_1", "Primary TDM1 Capture",
+ SND_SOC_DAPM_AIF_OUT("PRIMARY_TDM_TX_1", NULL,
0, 0, 0, 0),
- SND_SOC_DAPM_AIF_IN("PRIMARY_TDM_TX_2", "Primary TDM2 Capture",
+ SND_SOC_DAPM_AIF_OUT("PRIMARY_TDM_TX_2", NULL,
0, 0, 0, 0),
- SND_SOC_DAPM_AIF_IN("PRIMARY_TDM_TX_3", "Primary TDM3 Capture",
+ SND_SOC_DAPM_AIF_OUT("PRIMARY_TDM_TX_3", NULL,
0, 0, 0, 0),
- SND_SOC_DAPM_AIF_IN("PRIMARY_TDM_TX_4", "Primary TDM4 Capture",
+ SND_SOC_DAPM_AIF_OUT("PRIMARY_TDM_TX_4", NULL,
0, 0, 0, 0),
- SND_SOC_DAPM_AIF_IN("PRIMARY_TDM_TX_5", "Primary TDM5 Capture",
+ SND_SOC_DAPM_AIF_OUT("PRIMARY_TDM_TX_5", NULL,
0, 0, 0, 0),
- SND_SOC_DAPM_AIF_IN("PRIMARY_TDM_TX_6", "Primary TDM6 Capture",
+ SND_SOC_DAPM_AIF_OUT("PRIMARY_TDM_TX_6", NULL,
0, 0, 0, 0),
- SND_SOC_DAPM_AIF_IN("PRIMARY_TDM_TX_7", "Primary TDM7 Capture",
+ SND_SOC_DAPM_AIF_OUT("PRIMARY_TDM_TX_7", NULL,
0, 0, 0, 0),

- SND_SOC_DAPM_AIF_OUT("SEC_TDM_RX_0", "Secondary TDM0 Playback",
+ SND_SOC_DAPM_AIF_IN("SEC_TDM_RX_0", NULL,
0, 0, 0, 0),
- SND_SOC_DAPM_AIF_OUT("SEC_TDM_RX_1", "Secondary TDM1 Playback",
+ SND_SOC_DAPM_AIF_IN("SEC_TDM_RX_1", NULL,
0, 0, 0, 0),
- SND_SOC_DAPM_AIF_OUT("SEC_TDM_RX_2", "Secondary TDM2 Playback",
+ SND_SOC_DAPM_AIF_IN("SEC_TDM_RX_2", NULL,
0, 0, 0, 0),
- SND_SOC_DAPM_AIF_OUT("SEC_TDM_RX_3", "Secondary TDM3 Playback",
+ SND_SOC_DAPM_AIF_IN("SEC_TDM_RX_3", NULL,
0, 0, 0, 0),
- SND_SOC_DAPM_AIF_OUT("SEC_TDM_RX_4", "Secondary TDM4 Playback",
+ SND_SOC_DAPM_AIF_IN("SEC_TDM_RX_4", NULL,
0, 0, 0, 0),
- SND_SOC_DAPM_AIF_OUT("SEC_TDM_RX_5", "Secondary TDM5 Playback",
+ SND_SOC_DAPM_AIF_IN("SEC_TDM_RX_5", NULL,
0, 0, 0, 0),
- SND_SOC_DAPM_AIF_OUT("SEC_TDM_RX_6", "Secondary TDM6 Playback",
+ SND_SOC_DAPM_AIF_IN("SEC_TDM_RX_6", NULL,
0, 0, 0, 0),
- SND_SOC_DAPM_AIF_OUT("SEC_TDM_RX_7", "Secondary TDM7 Playback",
+ SND_SOC_DAPM_AIF_IN("SEC_TDM_RX_7", NULL,
0, 0, 0, 0),
- SND_SOC_DAPM_AIF_IN("SEC_TDM_TX_0", "Secondary TDM0 Capture",
+ SND_SOC_DAPM_AIF_OUT("SEC_TDM_TX_0", NULL,
0, 0, 0, 0),
- SND_SOC_DAPM_AIF_IN("SEC_TDM_TX_1", "Secondary TDM1 Capture",
+ SND_SOC_DAPM_AIF_OUT("SEC_TDM_TX_1", NULL,
0, 0, 0, 0),
- SND_SOC_DAPM_AIF_IN("SEC_TDM_TX_2", "Secondary TDM2 Capture",
+ SND_SOC_DAPM_AIF_OUT("SEC_TDM_TX_2", NULL,
0, 0, 0, 0),
- SND_SOC_DAPM_AIF_IN("SEC_TDM_TX_3", "Secondary TDM3 Capture",
+ SND_SOC_DAPM_AIF_OUT("SEC_TDM_TX_3", NULL,
0, 0, 0, 0),
- SND_SOC_DAPM_AIF_IN("SEC_TDM_TX_4", "Secondary TDM4 Capture",
+ SND_SOC_DAPM_AIF_OUT("SEC_TDM_TX_4", NULL,
0, 0, 0, 0),
- SND_SOC_DAPM_AIF_IN("SEC_TDM_TX_5", "Secondary TDM5 Capture",
+ SND_SOC_DAPM_AIF_OUT("SEC_TDM_TX_5", NULL,
0, 0, 0, 0),
- SND_SOC_DAPM_AIF_IN("SEC_TDM_TX_6", "Secondary TDM6 Capture",
+ SND_SOC_DAPM_AIF_OUT("SEC_TDM_TX_6", NULL,
0, 0, 0, 0),
- SND_SOC_DAPM_AIF_IN("SEC_TDM_TX_7", "Secondary TDM7 Capture",
+ SND_SOC_DAPM_AIF_OUT("SEC_TDM_TX_7", NULL,
0, 0, 0, 0),

- SND_SOC_DAPM_AIF_OUT("TERT_TDM_RX_0", "Tertiary TDM0 Playback",
+ SND_SOC_DAPM_AIF_IN("TERT_TDM_RX_0", NULL,
0, 0, 0, 0),
- SND_SOC_DAPM_AIF_OUT("TERT_TDM_RX_1", "Tertiary TDM1 Playback",
+ SND_SOC_DAPM_AIF_IN("TERT_TDM_RX_1", NULL,
0, 0, 0, 0),
- SND_SOC_DAPM_AIF_OUT("TERT_TDM_RX_2", "Tertiary TDM2 Playback",
+ SND_SOC_DAPM_AIF_IN("TERT_TDM_RX_2", NULL,
0, 0, 0, 0),
- SND_SOC_DAPM_AIF_OUT("TERT_TDM_RX_3", "Tertiary TDM3 Playback",
+ SND_SOC_DAPM_AIF_IN("TERT_TDM_RX_3", NULL,
0, 0, 0, 0),
- SND_SOC_DAPM_AIF_OUT("TERT_TDM_RX_4", "Tertiary TDM4 Playback",
+ SND_SOC_DAPM_AIF_IN("TERT_TDM_RX_4", NULL,
0, 0, 0, 0),
- SND_SOC_DAPM_AIF_OUT("TERT_TDM_RX_5", "Tertiary TDM5 Playback",
+ SND_SOC_DAPM_AIF_IN("TERT_TDM_RX_5", NULL,
0, 0, 0, 0),
- SND_SOC_DAPM_AIF_OUT("TERT_TDM_RX_6", "Tertiary TDM6 Playback",
+ SND_SOC_DAPM_AIF_IN("TERT_TDM_RX_6", NULL,
0, 0, 0, 0),
- SND_SOC_DAPM_AIF_OUT("TERT_TDM_RX_7", "Tertiary TDM7 Playback",
+ SND_SOC_DAPM_AIF_IN("TERT_TDM_RX_7", NULL,
0, 0, 0, 0),
- SND_SOC_DAPM_AIF_IN("TERT_TDM_TX_0", "Tertiary TDM0 Capture",
+ SND_SOC_DAPM_AIF_OUT("TERT_TDM_TX_0", NULL,
0, 0, 0, 0),
- SND_SOC_DAPM_AIF_IN("TERT_TDM_TX_1", "Tertiary TDM1 Capture",
+ SND_SOC_DAPM_AIF_OUT("TERT_TDM_TX_1", NULL,
0, 0, 0, 0),
- SND_SOC_DAPM_AIF_IN("TERT_TDM_TX_2", "Tertiary TDM2 Capture",
+ SND_SOC_DAPM_AIF_OUT("TERT_TDM_TX_2", NULL,
0, 0, 0, 0),
- SND_SOC_DAPM_AIF_IN("TERT_TDM_TX_3", "Tertiary TDM3 Capture",
+ SND_SOC_DAPM_AIF_OUT("TERT_TDM_TX_3", NULL,
0, 0, 0, 0),
- SND_SOC_DAPM_AIF_IN("TERT_TDM_TX_4", "Tertiary TDM4 Capture",
+ SND_SOC_DAPM_AIF_OUT("TERT_TDM_TX_4", NULL,
0, 0, 0, 0),
- SND_SOC_DAPM_AIF_IN("TERT_TDM_TX_5", "Tertiary TDM5 Capture",
+ SND_SOC_DAPM_AIF_OUT("TERT_TDM_TX_5", NULL,
0, 0, 0, 0),
- SND_SOC_DAPM_AIF_IN("TERT_TDM_TX_6", "Tertiary TDM6 Capture",
+ SND_SOC_DAPM_AIF_OUT("TERT_TDM_TX_6", NULL,
0, 0, 0, 0),
- SND_SOC_DAPM_AIF_IN("TERT_TDM_TX_7", "Tertiary TDM7 Capture",
+ SND_SOC_DAPM_AIF_OUT("TERT_TDM_TX_7", NULL,
0, 0, 0, 0),

- SND_SOC_DAPM_AIF_OUT("QUAT_TDM_RX_0", "Quaternary TDM0 Playback",
+ SND_SOC_DAPM_AIF_IN("QUAT_TDM_RX_0", NULL,
0, 0, 0, 0),
- SND_SOC_DAPM_AIF_OUT("QUAT_TDM_RX_1", "Quaternary TDM1 Playback",
+ SND_SOC_DAPM_AIF_IN("QUAT_TDM_RX_1", NULL,
0, 0, 0, 0),
- SND_SOC_DAPM_AIF_OUT("QUAT_TDM_RX_2", "Quaternary TDM2 Playback",
+ SND_SOC_DAPM_AIF_IN("QUAT_TDM_RX_2", NULL,
0, 0, 0, 0),
- SND_SOC_DAPM_AIF_OUT("QUAT_TDM_RX_3", "Quaternary TDM3 Playback",
+ SND_SOC_DAPM_AIF_IN("QUAT_TDM_RX_3", NULL,
0, 0, 0, 0),
- SND_SOC_DAPM_AIF_OUT("QUAT_TDM_RX_4", "Quaternary TDM4 Playback",
+ SND_SOC_DAPM_AIF_IN("QUAT_TDM_RX_4", NULL,
0, 0, 0, 0),
- SND_SOC_DAPM_AIF_OUT("QUAT_TDM_RX_5", "Quaternary TDM5 Playback",
+ SND_SOC_DAPM_AIF_IN("QUAT_TDM_RX_5", NULL,
0, 0, 0, 0),
- SND_SOC_DAPM_AIF_OUT("QUAT_TDM_RX_6", "Quaternary TDM6 Playback",
+ SND_SOC_DAPM_AIF_IN("QUAT_TDM_RX_6", NULL,
0, 0, 0, 0),
- SND_SOC_DAPM_AIF_OUT("QUAT_TDM_RX_7", "Quaternary TDM7 Playback",
+ SND_SOC_DAPM_AIF_IN("QUAT_TDM_RX_7", NULL,
0, 0, 0, 0),
- SND_SOC_DAPM_AIF_IN("QUAT_TDM_TX_0", "Quaternary TDM0 Capture",
+ SND_SOC_DAPM_AIF_OUT("QUAT_TDM_TX_0", NULL,
0, 0, 0, 0),
- SND_SOC_DAPM_AIF_IN("QUAT_TDM_TX_1", "Quaternary TDM1 Capture",
+ SND_SOC_DAPM_AIF_OUT("QUAT_TDM_TX_1", NULL,
0, 0, 0, 0),
- SND_SOC_DAPM_AIF_IN("QUAT_TDM_TX_2", "Quaternary TDM2 Capture",
+ SND_SOC_DAPM_AIF_OUT("QUAT_TDM_TX_2", NULL,
0, 0, 0, 0),
- SND_SOC_DAPM_AIF_IN("QUAT_TDM_TX_3", "Quaternary TDM3 Capture",
+ SND_SOC_DAPM_AIF_OUT("QUAT_TDM_TX_3", NULL,
0, 0, 0, 0),
- SND_SOC_DAPM_AIF_IN("QUAT_TDM_TX_4", "Quaternary TDM4 Capture",
+ SND_SOC_DAPM_AIF_OUT("QUAT_TDM_TX_4", NULL,
0, 0, 0, 0),
- SND_SOC_DAPM_AIF_IN("QUAT_TDM_TX_5", "Quaternary TDM5 Capture",
+ SND_SOC_DAPM_AIF_OUT("QUAT_TDM_TX_5", NULL,
0, 0, 0, 0),
- SND_SOC_DAPM_AIF_IN("QUAT_TDM_TX_6", "Quaternary TDM6 Capture",
+ SND_SOC_DAPM_AIF_OUT("QUAT_TDM_TX_6", NULL,
0, 0, 0, 0),
- SND_SOC_DAPM_AIF_IN("QUAT_TDM_TX_7", "Quaternary TDM7 Capture",
+ SND_SOC_DAPM_AIF_OUT("QUAT_TDM_TX_7", NULL,
0, 0, 0, 0),

- SND_SOC_DAPM_AIF_OUT("QUIN_TDM_RX_0", "Quinary TDM0 Playback",
+ SND_SOC_DAPM_AIF_IN("QUIN_TDM_RX_0", NULL,
0, 0, 0, 0),
- SND_SOC_DAPM_AIF_OUT("QUIN_TDM_RX_1", "Quinary TDM1 Playback",
+ SND_SOC_DAPM_AIF_IN("QUIN_TDM_RX_1", NULL,
0, 0, 0, 0),
- SND_SOC_DAPM_AIF_OUT("QUIN_TDM_RX_2", "Quinary TDM2 Playback",
+ SND_SOC_DAPM_AIF_IN("QUIN_TDM_RX_2", NULL,
0, 0, 0, 0),
- SND_SOC_DAPM_AIF_OUT("QUIN_TDM_RX_3", "Quinary TDM3 Playback",
+ SND_SOC_DAPM_AIF_IN("QUIN_TDM_RX_3", NULL,
0, 0, 0, 0),
- SND_SOC_DAPM_AIF_OUT("QUIN_TDM_RX_4", "Quinary TDM4 Playback",
+ SND_SOC_DAPM_AIF_IN("QUIN_TDM_RX_4", NULL,
0, 0, 0, 0),
- SND_SOC_DAPM_AIF_OUT("QUIN_TDM_RX_5", "Quinary TDM5 Playback",
+ SND_SOC_DAPM_AIF_IN("QUIN_TDM_RX_5", NULL,
0, 0, 0, 0),
- SND_SOC_DAPM_AIF_OUT("QUIN_TDM_RX_6", "Quinary TDM6 Playback",
+ SND_SOC_DAPM_AIF_IN("QUIN_TDM_RX_6", NULL,
0, 0, 0, 0),
- SND_SOC_DAPM_AIF_OUT("QUIN_TDM_RX_7", "Quinary TDM7 Playback",
+ SND_SOC_DAPM_AIF_IN("QUIN_TDM_RX_7", NULL,
0, 0, 0, 0),
- SND_SOC_DAPM_AIF_IN("QUIN_TDM_TX_0", "Quinary TDM0 Capture",
+ SND_SOC_DAPM_AIF_OUT("QUIN_TDM_TX_0", NULL,
0, 0, 0, 0),
- SND_SOC_DAPM_AIF_IN("QUIN_TDM_TX_1", "Quinary TDM1 Capture",
+ SND_SOC_DAPM_AIF_OUT("QUIN_TDM_TX_1", NULL,
0, 0, 0, 0),
- SND_SOC_DAPM_AIF_IN("QUIN_TDM_TX_2", "Quinary TDM2 Capture",
+ SND_SOC_DAPM_AIF_OUT("QUIN_TDM_TX_2", NULL,
0, 0, 0, 0),
- SND_SOC_DAPM_AIF_IN("QUIN_TDM_TX_3", "Quinary TDM3 Capture",
+ SND_SOC_DAPM_AIF_OUT("QUIN_TDM_TX_3", NULL,
0, 0, 0, 0),
- SND_SOC_DAPM_AIF_IN("QUIN_TDM_TX_4", "Quinary TDM4 Capture",
+ SND_SOC_DAPM_AIF_OUT("QUIN_TDM_TX_4", NULL,
0, 0, 0, 0),
- SND_SOC_DAPM_AIF_IN("QUIN_TDM_TX_5", "Quinary TDM5 Capture",
+ SND_SOC_DAPM_AIF_OUT("QUIN_TDM_TX_5", NULL,
0, 0, 0, 0),
- SND_SOC_DAPM_AIF_IN("QUIN_TDM_TX_6", "Quinary TDM6 Capture",
+ SND_SOC_DAPM_AIF_OUT("QUIN_TDM_TX_6", NULL,
0, 0, 0, 0),
- SND_SOC_DAPM_AIF_IN("QUIN_TDM_TX_7", "Quinary TDM7 Capture",
+ SND_SOC_DAPM_AIF_OUT("QUIN_TDM_TX_7", NULL,
0, 0, 0, 0),
};

--
2.19.1




2018-12-14 12:05:01

by Greg Kroah-Hartman

[permalink] [raw]
Subject: [PATCH 4.19 016/142] tun: forbid iface creation with rtnl ops

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

From: Nicolas Dichtel <[email protected]>

[ Upstream commit 35b827b6d06199841a83839e8bb69c0cd13a28be ]

It's not supported right now (the goal of the initial patch was to support
'ip link del' only).

Before the patch:
$ ip link add foo type tun
[ 239.632660] BUG: unable to handle kernel NULL pointer dereference at 0000000000000000
[snip]
[ 239.636410] RIP: 0010:register_netdevice+0x8e/0x3a0

This panic occurs because dev->netdev_ops is not set by tun_setup(). But to
have something usable, it will require more than just setting
netdev_ops.

Fixes: f019a7a594d9 ("tun: Implement ip link del tunXXX")
CC: Eric W. Biederman <[email protected]>
Signed-off-by: Nicolas Dichtel <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/tun.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)

--- a/drivers/net/tun.c
+++ b/drivers/net/tun.c
@@ -2268,9 +2268,9 @@ static void tun_setup(struct net_device
static int tun_validate(struct nlattr *tb[], struct nlattr *data[],
struct netlink_ext_ack *extack)
{
- if (!data)
- return 0;
- return -EINVAL;
+ NL_SET_ERR_MSG(extack,
+ "tun/tap creation via rtnetlink is not supported.");
+ return -EOPNOTSUPP;
}

static size_t tun_get_size(const struct net_device *dev)



2018-12-14 12:05:08

by Greg Kroah-Hartman

[permalink] [raw]
Subject: [PATCH 4.19 017/142] virtio-net: keep vnet header zeroed after processing XDP

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

From: Jason Wang <[email protected]>

[ Upstream commit 436c9453a1ac0944b82870ef2e0d9be956b396d9 ]

We copy vnet header unconditionally in page_to_skb() this is wrong
since XDP may modify the packet data. So let's keep a zeroed vnet
header for not confusing the conversion between vnet header and skb
metadata.

In the future, we should able to detect whether or not the packet was
modified and keep using the vnet header when packet was not touched.

Fixes: f600b6905015 ("virtio_net: Add XDP support")
Reported-by: Pavel Popa <[email protected]>
Signed-off-by: Jason Wang <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/virtio_net.c | 14 +++++++++-----
1 file changed, 9 insertions(+), 5 deletions(-)

--- a/drivers/net/virtio_net.c
+++ b/drivers/net/virtio_net.c
@@ -365,7 +365,8 @@ static unsigned int mergeable_ctx_to_tru
static struct sk_buff *page_to_skb(struct virtnet_info *vi,
struct receive_queue *rq,
struct page *page, unsigned int offset,
- unsigned int len, unsigned int truesize)
+ unsigned int len, unsigned int truesize,
+ bool hdr_valid)
{
struct sk_buff *skb;
struct virtio_net_hdr_mrg_rxbuf *hdr;
@@ -387,7 +388,8 @@ static struct sk_buff *page_to_skb(struc
else
hdr_padded_len = sizeof(struct padded_vnet_hdr);

- memcpy(hdr, p, hdr_len);
+ if (hdr_valid)
+ memcpy(hdr, p, hdr_len);

len -= hdr_len;
offset += hdr_padded_len;
@@ -739,7 +741,8 @@ static struct sk_buff *receive_big(struc
struct virtnet_rq_stats *stats)
{
struct page *page = buf;
- struct sk_buff *skb = page_to_skb(vi, rq, page, 0, len, PAGE_SIZE);
+ struct sk_buff *skb = page_to_skb(vi, rq, page, 0, len,
+ PAGE_SIZE, true);

stats->bytes += len - vi->hdr_len;
if (unlikely(!skb))
@@ -842,7 +845,8 @@ static struct sk_buff *receive_mergeable
rcu_read_unlock();
put_page(page);
head_skb = page_to_skb(vi, rq, xdp_page,
- offset, len, PAGE_SIZE);
+ offset, len,
+ PAGE_SIZE, false);
return head_skb;
}
break;
@@ -898,7 +902,7 @@ static struct sk_buff *receive_mergeable
goto err_skb;
}

- head_skb = page_to_skb(vi, rq, page, offset, len, truesize);
+ head_skb = page_to_skb(vi, rq, page, offset, len, truesize, !xdp_prog);
curr_skb = head_skb;

if (unlikely(!curr_skb))



2018-12-14 12:05:18

by Greg Kroah-Hartman

[permalink] [raw]
Subject: [PATCH 4.19 052/142] s390/cpum_cf: Reject request for sampling in event initialization

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit 613a41b0d16e617f46776a93b975a1eeea96417c ]

On s390 command perf top fails
[root@s35lp76 perf] # ./perf top -F100000 --stdio
Error:
cycles: PMU Hardware doesn't support sampling/overflow-interrupts.
Try 'perf stat'
[root@s35lp76 perf] #

Using event -e rb0000 works as designed. Event rb0000 is the event
number of the sampling facility for basic sampling.

During system start up the following PMUs are installed in the kernel's
PMU list (from head to tail):
cpum_cf --> s390 PMU counter facility device driver
cpum_sf --> s390 PMU sampling facility device driver
uprobe
kprobe
tracepoint
task_clock
cpu_clock

Perf top executes following functions and calls perf_event_open(2) system
call with different parameters many times:

cmd_top
--> __cmd_top
--> perf_evlist__add_default
--> __perf_evlist__add_default
--> perf_evlist__new_cycles (creates event type:0 (HW)
config 0 (CPU_CYCLES)
--> perf_event_attr__set_max_precise_ip
Uses perf_event_open(2) to detect correct
precise_ip level. Fails 3 times on s390 which is ok.

Then functions cmd_top
--> __cmd_top
--> perf_top__start_counters
-->perf_evlist__config
--> perf_can_comm_exec
--> perf_probe_api
This functions test support for the following events:
"cycles:u", "instructions:u", "cpu-clock:u" using
--> perf_do_probe_api
--> perf_event_open_cloexec
Test the close on exec flag support with
perf_event_open(2).
perf_do_probe_api returns true if the event is
supported.
The function returns true because event cpu-clock is
supported by the PMU cpu_clock.
This is achieved by many calls to perf_event_open(2).

Function perf_top__start_counters now calls perf_evsel__open() for every
event, which is the default event cpu_cycles (config:0) and type HARDWARE
(type:0) which a predfined frequence of 4000.

Given the above order of the PMU list, the PMU cpum_cf gets called first
and returns 0, which indicates support for this sampling. The event is
fully allocated in the function perf_event_open (file kernel/event/core.c
near line 10521 and the following check fails:

event = perf_event_alloc(&attr, cpu, task, group_leader, NULL,
NULL, NULL, cgroup_fd);
if (IS_ERR(event)) {
err = PTR_ERR(event);
goto err_cred;
}

if (is_sampling_event(event)) {
if (event->pmu->capabilities & PERF_PMU_CAP_NO_INTERRUPT) {
err = -EOPNOTSUPP;
goto err_alloc;
}
}

The check for the interrupt capabilities fails and the system call
perf_event_open() returns -EOPNOTSUPP (-95).

Add a check to return -ENODEV when sampling is requested in PMU cpum_cf.
This allows common kernel code in the perf_event_open() system call to
test the next PMU in above list.

Fixes: 97b1198fece0 (" "s390, perf: Use common PMU interrupt disabled code")
Signed-off-by: Thomas Richter <[email protected]>
Reviewed-by: Hendrik Brueckner <[email protected]>
Signed-off-by: Martin Schwidefsky <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/s390/kernel/perf_cpum_cf.c | 2 ++
1 file changed, 2 insertions(+)

diff --git a/arch/s390/kernel/perf_cpum_cf.c b/arch/s390/kernel/perf_cpum_cf.c
index 74091fd3101e..d5523adeddbf 100644
--- a/arch/s390/kernel/perf_cpum_cf.c
+++ b/arch/s390/kernel/perf_cpum_cf.c
@@ -346,6 +346,8 @@ static int __hw_perf_event_init(struct perf_event *event)
break;

case PERF_TYPE_HARDWARE:
+ if (is_sampling_event(event)) /* No sampling support */
+ return -ENOENT;
ev = attr->config;
/* Count user space (problem-state) only */
if (!attr->exclude_user && attr->exclude_kernel) {
--
2.19.1




2018-12-14 12:05:19

by Greg Kroah-Hartman

[permalink] [raw]
Subject: [PATCH 4.19 053/142] hwmon: (ina2xx) Fix current value calculation

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit 38cd989ee38c16388cde89db5b734f9d55b905f9 ]

The current register (04h) has a sign bit at MSB. The comments
for this calculation also mention that it's a signed register.

However, the regval is unsigned type so result of calculation
turns out to be an incorrect value when current is negative.

This patch simply fixes this by adding a casting to s16.

Fixes: 5d389b125186c ("hwmon: (ina2xx) Make calibration register value fixed")
Signed-off-by: Nicolin Chen <[email protected]>
Signed-off-by: Guenter Roeck <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/hwmon/ina2xx.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/hwmon/ina2xx.c b/drivers/hwmon/ina2xx.c
index c2252cf452f5..07ee19573b3f 100644
--- a/drivers/hwmon/ina2xx.c
+++ b/drivers/hwmon/ina2xx.c
@@ -274,7 +274,7 @@ static int ina2xx_get_value(struct ina2xx_data *data, u8 reg,
break;
case INA2XX_CURRENT:
/* signed register, result in mA */
- val = regval * data->current_lsb_uA;
+ val = (s16)regval * data->current_lsb_uA;
val = DIV_ROUND_CLOSEST(val, 1000);
break;
case INA2XX_CALIBRATION:
--
2.19.1




2018-12-14 12:05:25

by Greg Kroah-Hartman

[permalink] [raw]
Subject: [PATCH 4.19 030/142] ARM: dts: am3517-som: Fix WL127x Wifi interrupt

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit 419b194cdedc76d0d3cd5b0900db0fa8177c4a52 ]

At the same time the AM3517 EVM was gaining WiFi support,
separate patches were introduced to move the interrupt
from HIGH to RISING. Because they overlapped, this was not
done to the AM3517-EVM. This patch fixes Kernel 4.19+

Fixes: 6bf5e3410f19 ("ARM: dts: am3517-som: Add WL127x Wifi")

Signed-off-by: Adam Ford <[email protected]>
Signed-off-by: Tony Lindgren <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm/boot/dts/am3517-som.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/am3517-som.dtsi b/arch/arm/boot/dts/am3517-som.dtsi
index dae6e458e59f..b1c988eed87c 100644
--- a/arch/arm/boot/dts/am3517-som.dtsi
+++ b/arch/arm/boot/dts/am3517-som.dtsi
@@ -163,7 +163,7 @@
compatible = "ti,wl1271";
reg = <2>;
interrupt-parent = <&gpio6>;
- interrupts = <10 IRQ_TYPE_LEVEL_HIGH>; /* gpio_170 */
+ interrupts = <10 IRQ_TYPE_EDGE_RISING>; /* gpio_170 */
ref-clock-frequency = <26000000>;
tcxo-clock-frequency = <26000000>;
};
--
2.19.1




2018-12-14 12:05:33

by Greg Kroah-Hartman

[permalink] [raw]
Subject: [PATCH 4.19 029/142] ARM: dts: logicpd-somlv: Fix interrupt on mmc3_dat1

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit 3d8b804bc528d3720ec0c39c212af92dafaf6e84 ]

The interrupt on mmc3_dat1 is wrong which prevents this from
appearing in /proc/interrupts.

Fixes: ab8dd3aed011 ("ARM: DTS: Add minimal Support for Logic PD
DM3730 SOM-LV") #Kernel 4.9+

Signed-off-by: Adam Ford <[email protected]>
Signed-off-by: Tony Lindgren <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm/boot/dts/logicpd-som-lv.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/logicpd-som-lv.dtsi b/arch/arm/boot/dts/logicpd-som-lv.dtsi
index ac343330d0c8..98b682a8080c 100644
--- a/arch/arm/boot/dts/logicpd-som-lv.dtsi
+++ b/arch/arm/boot/dts/logicpd-som-lv.dtsi
@@ -129,7 +129,7 @@
};

&mmc3 {
- interrupts-extended = <&intc 94 &omap3_pmx_core2 0x46>;
+ interrupts-extended = <&intc 94 &omap3_pmx_core 0x136>;
pinctrl-0 = <&mmc3_pins &wl127x_gpio>;
pinctrl-names = "default";
vmmc-supply = <&wl12xx_vmmc>;
--
2.19.1




2018-12-14 12:05:55

by Greg Kroah-Hartman

[permalink] [raw]
Subject: [PATCH 4.19 065/142] objtool: Fix double-free in .cold detection error path

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit 0b9301fb632f7111a3293a30cc5b20f1b82ed08d ]

If read_symbols() fails during second list traversal (the one dealing
with ".cold" subfunctions) it frees the symbol, but never deletes it
from the list/hash_table resulting in symbol being freed again in
elf_close(). Fix it by just returning an error, leaving cleanup to
elf_close().

Signed-off-by: Artem Savkov <[email protected]>
Signed-off-by: Josh Poimboeuf <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Fixes: 13810435b9a7 ("objtool: Support GCC 8's cold subfunctions")
Link: http://lkml.kernel.org/r/beac5a9b7da9e8be90223459dcbe07766ae437dd.1542736240.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
tools/objtool/elf.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/tools/objtool/elf.c b/tools/objtool/elf.c
index 7ec85d567598..a6f543e0b387 100644
--- a/tools/objtool/elf.c
+++ b/tools/objtool/elf.c
@@ -312,7 +312,7 @@ static int read_symbols(struct elf *elf)
if (!pfunc) {
WARN("%s(): can't find parent function",
sym->name);
- goto err;
+ return -1;
}

sym->pfunc = pfunc;
--
2.19.1




2018-12-14 12:05:55

by Greg Kroah-Hartman

[permalink] [raw]
Subject: [PATCH 4.19 037/142] netfilter: nf_conncount: fix list_del corruption in conn_free

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit 31568ec09ea02a050249921698c9729419539cce ]

nf_conncount_tuple is an element of nft_connlimit and that is deleted by
conn_free(). Elements can be deleted by both GC routine and data path
functions (nf_conncount_lookup, nf_conncount_add) and they call
conn_free() to free elements. But conn_free() only protects lists, not
each element. So that list_del corruption could occurred.

The conn_free() doesn't check whether element is already deleted. In
order to protect elements, dead flag is added. If an element is deleted,
dead flag is set. The only conn_free() can delete elements so that both
list lock and dead flag are enough to protect it.

test commands:
%nft add table ip filter
%nft add chain ip filter input { type filter hook input priority 0\; }
%nft add rule filter input meter test { ip id ct count over 2 } counter

splat looks like:
[ 1779.495778] list_del corruption, ffff8800b6e12008->prev is LIST_POISON2 (dead000000000200)
[ 1779.505453] ------------[ cut here ]------------
[ 1779.506260] kernel BUG at lib/list_debug.c:50!
[ 1779.515831] invalid opcode: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN PTI
[ 1779.516772] CPU: 0 PID: 33 Comm: kworker/0:2 Not tainted 4.19.0-rc6+ #22
[ 1779.516772] Workqueue: events_power_efficient nft_rhash_gc [nf_tables_set]
[ 1779.516772] RIP: 0010:__list_del_entry_valid+0xd8/0x150
[ 1779.516772] Code: 39 48 83 c4 08 b8 01 00 00 00 5b 5d c3 48 89 ea 48 c7 c7 00 c3 5b 98 e8 0f dc 40 ff 0f 0b 48 c7 c7 60 c3 5b 98 e8 01 dc 40 ff <0f> 0b 48 c7 c7 c0 c3 5b 98 e8 f3 db 40 ff 0f 0b 48 c7 c7 20 c4 5b
[ 1779.516772] RSP: 0018:ffff880119127420 EFLAGS: 00010286
[ 1779.516772] RAX: 000000000000004e RBX: dead000000000200 RCX: 0000000000000000
[ 1779.516772] RDX: 000000000000004e RSI: 0000000000000008 RDI: ffffed0023224e7a
[ 1779.516772] RBP: ffff88011934bc10 R08: ffffed002367cea9 R09: ffffed002367cea9
[ 1779.516772] R10: 0000000000000001 R11: ffffed002367cea8 R12: ffff8800b6e12008
[ 1779.516772] R13: ffff8800b6e12010 R14: ffff88011934bc20 R15: ffff8800b6e12008
[ 1779.516772] FS: 0000000000000000(0000) GS:ffff88011b200000(0000) knlGS:0000000000000000
[ 1779.516772] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 1779.516772] CR2: 00007fc876534010 CR3: 000000010da16000 CR4: 00000000001006f0
[ 1779.516772] Call Trace:
[ 1779.516772] conn_free+0x9f/0x2b0 [nf_conncount]
[ 1779.516772] ? nf_ct_tmpl_alloc+0x2a0/0x2a0 [nf_conntrack]
[ 1779.516772] ? nf_conncount_add+0x520/0x520 [nf_conncount]
[ 1779.516772] ? do_raw_spin_trylock+0x1a0/0x1a0
[ 1779.516772] ? do_raw_spin_trylock+0x10/0x1a0
[ 1779.516772] find_or_evict+0xe5/0x150 [nf_conncount]
[ 1779.516772] nf_conncount_gc_list+0x162/0x360 [nf_conncount]
[ 1779.516772] ? nf_conncount_lookup+0xee0/0xee0 [nf_conncount]
[ 1779.516772] ? _raw_spin_unlock_irqrestore+0x45/0x50
[ 1779.516772] ? trace_hardirqs_off+0x6b/0x220
[ 1779.516772] ? trace_hardirqs_on_caller+0x220/0x220
[ 1779.516772] nft_rhash_gc+0x16b/0x540 [nf_tables_set]
[ ... ]

Fixes: 5c789e131cbb ("netfilter: nf_conncount: Add list lock and gc worker, and RCU for init tree search")
Signed-off-by: Taehee Yoo <[email protected]>
Signed-off-by: Pablo Neira Ayuso <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/netfilter/nf_conncount.c | 7 +++++--
1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/net/netfilter/nf_conncount.c b/net/netfilter/nf_conncount.c
index 71b1f4f99580..cb33709138df 100644
--- a/net/netfilter/nf_conncount.c
+++ b/net/netfilter/nf_conncount.c
@@ -49,6 +49,7 @@ struct nf_conncount_tuple {
struct nf_conntrack_zone zone;
int cpu;
u32 jiffies32;
+ bool dead;
struct rcu_head rcu_head;
};

@@ -106,6 +107,7 @@ nf_conncount_add(struct nf_conncount_list *list,
conn->zone = *zone;
conn->cpu = raw_smp_processor_id();
conn->jiffies32 = (u32)jiffies;
+ conn->dead = false;
spin_lock_bh(&list->list_lock);
if (list->dead == true) {
kmem_cache_free(conncount_conn_cachep, conn);
@@ -134,12 +136,13 @@ static bool conn_free(struct nf_conncount_list *list,

spin_lock_bh(&list->list_lock);

- if (list->count == 0) {
+ if (conn->dead) {
spin_unlock_bh(&list->list_lock);
- return free_entry;
+ return free_entry;
}

list->count--;
+ conn->dead = true;
list_del_rcu(&conn->node);
if (list->count == 0)
free_entry = true;
--
2.19.1




2018-12-14 12:06:05

by Greg Kroah-Hartman

[permalink] [raw]
Subject: [PATCH 4.19 062/142] perf tools: Restore proper cwd on return from mnt namespace

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit b01c1f69c8660eaeab7d365cd570103c5c073a02 ]

When reporting on 'record' server we try to retrieve/use the mnt
namespace of the profiled tasks. We use following API with cookie to
hold the return namespace, roughly:

nsinfo__mountns_enter(struct nsinfo *nsi, struct nscookie *nc)
setns(newns, 0);
...
new ns related open..
...
nsinfo__mountns_exit(struct nscookie *nc)
setns(nc->oldns)

Once finished we setns to old namespace, which also sets the current
working directory (cwd) to "/", trashing the cwd we had.

This is mostly fine, because we use absolute paths almost everywhere,
but it screws up 'perf diff':

# perf diff
failed to open perf.data: No such file or directory (try 'perf record' first)
...

Adding the current working directory to be part of the cookie and
restoring it in the nsinfo__mountns_exit call.

Signed-off-by: Jiri Olsa <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Krister Johansen <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Fixes: 843ff37bb59e ("perf symbols: Find symbols in different mount namespace")
Link: http://lkml.kernel.org/r/[email protected]
[ No need to check for NULL args for free(), use zfree() for struct members ]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
tools/perf/util/namespaces.c | 17 +++++++++++++++--
tools/perf/util/namespaces.h | 1 +
2 files changed, 16 insertions(+), 2 deletions(-)

diff --git a/tools/perf/util/namespaces.c b/tools/perf/util/namespaces.c
index cf8bd123cf73..aed170bd4384 100644
--- a/tools/perf/util/namespaces.c
+++ b/tools/perf/util/namespaces.c
@@ -18,6 +18,7 @@
#include <stdio.h>
#include <string.h>
#include <unistd.h>
+#include <asm/bug.h>

struct namespaces *namespaces__new(struct namespaces_event *event)
{
@@ -186,6 +187,7 @@ void nsinfo__mountns_enter(struct nsinfo *nsi,
char curpath[PATH_MAX];
int oldns = -1;
int newns = -1;
+ char *oldcwd = NULL;

if (nc == NULL)
return;
@@ -199,9 +201,13 @@ void nsinfo__mountns_enter(struct nsinfo *nsi,
if (snprintf(curpath, PATH_MAX, "/proc/self/ns/mnt") >= PATH_MAX)
return;

+ oldcwd = get_current_dir_name();
+ if (!oldcwd)
+ return;
+
oldns = open(curpath, O_RDONLY);
if (oldns < 0)
- return;
+ goto errout;

newns = open(nsi->mntns_path, O_RDONLY);
if (newns < 0)
@@ -210,11 +216,13 @@ void nsinfo__mountns_enter(struct nsinfo *nsi,
if (setns(newns, CLONE_NEWNS) < 0)
goto errout;

+ nc->oldcwd = oldcwd;
nc->oldns = oldns;
nc->newns = newns;
return;

errout:
+ free(oldcwd);
if (oldns > -1)
close(oldns);
if (newns > -1)
@@ -223,11 +231,16 @@ void nsinfo__mountns_enter(struct nsinfo *nsi,

void nsinfo__mountns_exit(struct nscookie *nc)
{
- if (nc == NULL || nc->oldns == -1 || nc->newns == -1)
+ if (nc == NULL || nc->oldns == -1 || nc->newns == -1 || !nc->oldcwd)
return;

setns(nc->oldns, CLONE_NEWNS);

+ if (nc->oldcwd) {
+ WARN_ON_ONCE(chdir(nc->oldcwd));
+ zfree(&nc->oldcwd);
+ }
+
if (nc->oldns > -1) {
close(nc->oldns);
nc->oldns = -1;
diff --git a/tools/perf/util/namespaces.h b/tools/perf/util/namespaces.h
index cae1a9a39722..d5f46c09ea31 100644
--- a/tools/perf/util/namespaces.h
+++ b/tools/perf/util/namespaces.h
@@ -38,6 +38,7 @@ struct nsinfo {
struct nscookie {
int oldns;
int newns;
+ char *oldcwd;
};

int nsinfo__init(struct nsinfo *nsi);
--
2.19.1




2018-12-14 12:06:06

by Greg Kroah-Hartman

[permalink] [raw]
Subject: [PATCH 4.19 046/142] hwmon (ina2xx) Fix NULL id pointer in probe()

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit 70df9ebbd82c794ddfbb49d45b337f18d5588dc2 ]

When using DT configurations, the id pointer might turn out to
be NULL. Then the driver encounters NULL pointer access:

Unable to handle kernel read from unreadable memory at vaddr 00000018
[...]
PC is at ina2xx_probe+0x114/0x200
LR is at ina2xx_probe+0x10c/0x200
[...]
Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b

The reason is that i2c core returns the id pointer by matching
id_table with client->name, while the client->name is actually
using the name from the first string in the DT compatible list,
not the best one. So i2c core would fail to match the id_table
if the best matched compatible string isn't the first one, and
then would return a NULL id pointer.

This probably should be fixed in i2c core. But it doesn't hurt
to make the driver robust. So this patch fixes it by using the
"chip" that's added to unify both DT and non-DT configurations.

Additionally, since id pointer could be null, so as id->name:
ina2xx 10-0047: power monitor (null) (Rshunt = 1000 uOhm)
ina2xx 10-0048: power monitor (null) (Rshunt = 10000 uOhm)

So this patch also fixes NULL name pointer, using client->name
to play safe and to align with hwmon->name.

Fixes: bd0ddd4d0883 ("hwmon: (ina2xx) Add OF device ID table")
Signed-off-by: Nicolin Chen <[email protected]>
Signed-off-by: Guenter Roeck <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/hwmon/ina2xx.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/hwmon/ina2xx.c b/drivers/hwmon/ina2xx.c
index 71d3445ba869..c2252cf452f5 100644
--- a/drivers/hwmon/ina2xx.c
+++ b/drivers/hwmon/ina2xx.c
@@ -491,7 +491,7 @@ static int ina2xx_probe(struct i2c_client *client,
}

data->groups[group++] = &ina2xx_group;
- if (id->driver_data == ina226)
+ if (chip == ina226)
data->groups[group++] = &ina226_group;

hwmon_dev = devm_hwmon_device_register_with_groups(dev, client->name,
@@ -500,7 +500,7 @@ static int ina2xx_probe(struct i2c_client *client,
return PTR_ERR(hwmon_dev);

dev_info(dev, "power monitor %s (Rshunt = %li uOhm)\n",
- id->name, data->rshunt);
+ client->name, data->rshunt);

return 0;
}
--
2.19.1




2018-12-14 12:06:20

by Greg Kroah-Hartman

[permalink] [raw]
Subject: [PATCH 4.19 049/142] ASoC: wm_adsp: Fix dma-unsafe read of scratch registers

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit 20e00db2f59bdddf8a8e241473ef8be94631d3ae ]

Stack memory isn't DMA-safe so it isn't safe to use either
regmap_raw_read or regmap_bulk_read to read into stack memory.

The two functions to read the scratch registers were using
stack memory and regmap_raw_read. It's not worth allocating
memory just for this trivial read, and it isn't time-critical.
A simple regmap_read for each register is sufficient.

Signed-off-by: Richard Fitzgerald <[email protected]>
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/soc/codecs/wm_adsp.c | 37 ++++++++++++++++++++-----------------
1 file changed, 20 insertions(+), 17 deletions(-)

diff --git a/sound/soc/codecs/wm_adsp.c b/sound/soc/codecs/wm_adsp.c
index f61656070225..4d3ec295679d 100644
--- a/sound/soc/codecs/wm_adsp.c
+++ b/sound/soc/codecs/wm_adsp.c
@@ -765,38 +765,41 @@ static unsigned int wm_adsp_region_to_reg(struct wm_adsp_region const *mem,

static void wm_adsp2_show_fw_status(struct wm_adsp *dsp)
{
- u16 scratch[4];
+ unsigned int scratch[4];
+ unsigned int addr = dsp->base + ADSP2_SCRATCH0;
+ unsigned int i;
int ret;

- ret = regmap_raw_read(dsp->regmap, dsp->base + ADSP2_SCRATCH0,
- scratch, sizeof(scratch));
- if (ret) {
- adsp_err(dsp, "Failed to read SCRATCH regs: %d\n", ret);
- return;
+ for (i = 0; i < ARRAY_SIZE(scratch); ++i) {
+ ret = regmap_read(dsp->regmap, addr + i, &scratch[i]);
+ if (ret) {
+ adsp_err(dsp, "Failed to read SCRATCH%u: %d\n", i, ret);
+ return;
+ }
}

adsp_dbg(dsp, "FW SCRATCH 0:0x%x 1:0x%x 2:0x%x 3:0x%x\n",
- be16_to_cpu(scratch[0]),
- be16_to_cpu(scratch[1]),
- be16_to_cpu(scratch[2]),
- be16_to_cpu(scratch[3]));
+ scratch[0], scratch[1], scratch[2], scratch[3]);
}

static void wm_adsp2v2_show_fw_status(struct wm_adsp *dsp)
{
- u32 scratch[2];
+ unsigned int scratch[2];
int ret;

- ret = regmap_raw_read(dsp->regmap, dsp->base + ADSP2V2_SCRATCH0_1,
- scratch, sizeof(scratch));
-
+ ret = regmap_read(dsp->regmap, dsp->base + ADSP2V2_SCRATCH0_1,
+ &scratch[0]);
if (ret) {
- adsp_err(dsp, "Failed to read SCRATCH regs: %d\n", ret);
+ adsp_err(dsp, "Failed to read SCRATCH0_1: %d\n", ret);
return;
}

- scratch[0] = be32_to_cpu(scratch[0]);
- scratch[1] = be32_to_cpu(scratch[1]);
+ ret = regmap_read(dsp->regmap, dsp->base + ADSP2V2_SCRATCH2_3,
+ &scratch[1]);
+ if (ret) {
+ adsp_err(dsp, "Failed to read SCRATCH2_3: %d\n", ret);
+ return;
+ }

adsp_dbg(dsp, "FW SCRATCH 0:0x%x 1:0x%x 2:0x%x 3:0x%x\n",
scratch[0] & 0xFFFF,
--
2.19.1




2018-12-14 12:06:24

by Greg Kroah-Hartman

[permalink] [raw]
Subject: [PATCH 4.19 026/142] staging: rtl8723bs: Fix the return value in case of error in rtw_wx_read32()

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit c3e43d8b958bd6849817393483e805d8638a8ab7 ]

We return 0 unconditionally in 'rtw_wx_read32()'.
However, 'ret' is set to some error codes in several error handling paths.

Return 'ret' instead to propagate the error code.

Fixes: 554c0a3abf216 ("staging: Add rtl8723bs sdio wifi driver")
Signed-off-by: Christophe JAILLET <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/staging/rtl8723bs/os_dep/ioctl_linux.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/staging/rtl8723bs/os_dep/ioctl_linux.c b/drivers/staging/rtl8723bs/os_dep/ioctl_linux.c
index c38298d960ff..4f120e72c7d2 100644
--- a/drivers/staging/rtl8723bs/os_dep/ioctl_linux.c
+++ b/drivers/staging/rtl8723bs/os_dep/ioctl_linux.c
@@ -2289,7 +2289,7 @@ static int rtw_wx_read32(struct net_device *dev,
exit:
kfree(ptmp);

- return 0;
+ return ret;
}

static int rtw_wx_write32(struct net_device *dev,
--
2.19.1




2018-12-14 12:06:28

by Greg Kroah-Hartman

[permalink] [raw]
Subject: [PATCH 4.19 019/142] sctp: update frag_point when stream_interleave is set

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

From: Xin Long <[email protected]>

[ Upstream commit 4135cce7fd0a0d755665c02728578c7c5afe4726 ]

sctp_assoc_update_frag_point() should be called whenever asoc->pathmtu
changes, but we missed one place in sctp_association_init(). It would
cause frag_point is zero when sending data.

As says in Jakub's reproducer, if sp->pathmtu is set by socketopt, the
new asoc->pathmtu inherits it in sctp_association_init(). Later when
transports are added and their pmtu >= asoc->pathmtu, it will never
call sctp_assoc_update_frag_point() to set frag_point.

This patch is to fix it by updating frag_point after asoc->pathmtu is
set as sp->pathmtu in sctp_association_init(). Note that it moved them
after sctp_stream_init(), as stream->si needs to be set first.

Frag_point's calculation is also related with datachunk's type, so it
needs to update frag_point when stream->si may be changed in
sctp_process_init().

v1->v2:
- call sctp_assoc_update_frag_point() separately in sctp_process_init
and sctp_association_init, per Marcelo's suggestion.

Fixes: 2f5e3c9df693 ("sctp: introduce sctp_assoc_update_frag_point")
Reported-by: Jakub Audykowicz <[email protected]>
Signed-off-by: Xin Long <[email protected]>
Acked-by: Marcelo Ricardo Leitner <[email protected]>
Acked-by: Neil Horman <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/sctp/associola.c | 7 ++++---
net/sctp/sm_make_chunk.c | 3 +++
2 files changed, 7 insertions(+), 3 deletions(-)

--- a/net/sctp/associola.c
+++ b/net/sctp/associola.c
@@ -118,9 +118,6 @@ static struct sctp_association *sctp_ass
asoc->flowlabel = sp->flowlabel;
asoc->dscp = sp->dscp;

- /* Initialize default path MTU. */
- asoc->pathmtu = sp->pathmtu;
-
/* Set association default SACK delay */
asoc->sackdelay = msecs_to_jiffies(sp->sackdelay);
asoc->sackfreq = sp->sackfreq;
@@ -252,6 +249,10 @@ static struct sctp_association *sctp_ass
0, gfp))
goto fail_init;

+ /* Initialize default path MTU. */
+ asoc->pathmtu = sp->pathmtu;
+ sctp_assoc_update_frag_point(asoc);
+
/* Assume that peer would support both address types unless we are
* told otherwise.
*/
--- a/net/sctp/sm_make_chunk.c
+++ b/net/sctp/sm_make_chunk.c
@@ -2462,6 +2462,9 @@ int sctp_process_init(struct sctp_associ
asoc->c.sinit_max_instreams, gfp))
goto clean_up;

+ /* Update frag_point when stream_interleave may get changed. */
+ sctp_assoc_update_frag_point(asoc);
+
if (!asoc->temp && sctp_assoc_set_id(asoc, gfp))
goto clean_up;




2018-12-14 12:06:31

by Greg Kroah-Hartman

[permalink] [raw]
Subject: [PATCH 4.19 068/142] phy: qcom-qusb2: Fix HSTX_TRIM tuning with fused value for SDM845

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit c88520db18ba0b9a41326c3b8680e7c09eb4c381 ]

Tune1 register on sdm845 is used to update HSTX_TRIM with fused
setting. Enable same by specifying update_tune1_with_efuse flag
for sdm845, otherwise driver ends up programming tune2 register.

Fixes: ef17f6e212ca ("phy: qcom-qusb2: Add QUSB2 PHYs support for sdm845")
Signed-off-by: Manu Gautam <[email protected]>
Reviewed-by: Douglas Anderson <[email protected]>
Reviewed-by: Stephen Boyd <[email protected]>
Acked-by: Vivek Gautam <[email protected]>
Signed-off-by: Kishon Vijay Abraham I <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/phy/qualcomm/phy-qcom-qusb2.c | 1 +
1 file changed, 1 insertion(+)

diff --git a/drivers/phy/qualcomm/phy-qcom-qusb2.c b/drivers/phy/qualcomm/phy-qcom-qusb2.c
index 9d6c88064158..69c92843eb3b 100644
--- a/drivers/phy/qualcomm/phy-qcom-qusb2.c
+++ b/drivers/phy/qualcomm/phy-qcom-qusb2.c
@@ -231,6 +231,7 @@ static const struct qusb2_phy_cfg sdm845_phy_cfg = {
.mask_core_ready = CORE_READY_STATUS,
.has_pll_override = true,
.autoresume_en = BIT(0),
+ .update_tune1_with_efuse = true,
};

static const char * const qusb2_phy_vreg_names[] = {
--
2.19.1




2018-12-14 12:06:38

by Greg Kroah-Hartman

[permalink] [raw]
Subject: [PATCH 4.19 078/142] ASoC: omap-mcpdm: Add pm_qos handling to avoid under/overruns with CPU_IDLE

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit 373a500e34aea97971c9d71e45edad458d3da98f ]

We need to block sleep states which would require longer time to leave than
the time the DMA must react to the DMA request in order to keep the FIFO
serviced without under of overrun.

Signed-off-by: Peter Ujfalusi <[email protected]>
Acked-by: Jarkko Nikula <[email protected]>
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/soc/omap/omap-mcpdm.c | 43 ++++++++++++++++++++++++++++++++++++-
1 file changed, 42 insertions(+), 1 deletion(-)

diff --git a/sound/soc/omap/omap-mcpdm.c b/sound/soc/omap/omap-mcpdm.c
index 4c1be36c2207..7d5bdc5a2890 100644
--- a/sound/soc/omap/omap-mcpdm.c
+++ b/sound/soc/omap/omap-mcpdm.c
@@ -54,6 +54,8 @@ struct omap_mcpdm {
unsigned long phys_base;
void __iomem *io_base;
int irq;
+ struct pm_qos_request pm_qos_req;
+ int latency[2];

struct mutex mutex;

@@ -277,6 +279,9 @@ static void omap_mcpdm_dai_shutdown(struct snd_pcm_substream *substream,
struct snd_soc_dai *dai)
{
struct omap_mcpdm *mcpdm = snd_soc_dai_get_drvdata(dai);
+ int tx = (substream->stream == SNDRV_PCM_STREAM_PLAYBACK);
+ int stream1 = tx ? SNDRV_PCM_STREAM_PLAYBACK : SNDRV_PCM_STREAM_CAPTURE;
+ int stream2 = tx ? SNDRV_PCM_STREAM_CAPTURE : SNDRV_PCM_STREAM_PLAYBACK;

mutex_lock(&mcpdm->mutex);

@@ -289,6 +294,14 @@ static void omap_mcpdm_dai_shutdown(struct snd_pcm_substream *substream,
}
}

+ if (mcpdm->latency[stream2])
+ pm_qos_update_request(&mcpdm->pm_qos_req,
+ mcpdm->latency[stream2]);
+ else if (mcpdm->latency[stream1])
+ pm_qos_remove_request(&mcpdm->pm_qos_req);
+
+ mcpdm->latency[stream1] = 0;
+
mutex_unlock(&mcpdm->mutex);
}

@@ -300,7 +313,7 @@ static int omap_mcpdm_dai_hw_params(struct snd_pcm_substream *substream,
int stream = substream->stream;
struct snd_dmaengine_dai_dma_data *dma_data;
u32 threshold;
- int channels;
+ int channels, latency;
int link_mask = 0;

channels = params_channels(params);
@@ -344,14 +357,25 @@ static int omap_mcpdm_dai_hw_params(struct snd_pcm_substream *substream,

dma_data->maxburst =
(MCPDM_DN_THRES_MAX - threshold) * channels;
+ latency = threshold;
} else {
/* If playback is not running assume a stereo stream to come */
if (!mcpdm->config[!stream].link_mask)
mcpdm->config[!stream].link_mask = (0x3 << 3);

dma_data->maxburst = threshold * channels;
+ latency = (MCPDM_DN_THRES_MAX - threshold);
}

+ /*
+ * The DMA must act to a DMA request within latency time (usec) to avoid
+ * under/overflow
+ */
+ mcpdm->latency[stream] = latency * USEC_PER_SEC / params_rate(params);
+
+ if (!mcpdm->latency[stream])
+ mcpdm->latency[stream] = 10;
+
/* Check if we need to restart McPDM with this stream */
if (mcpdm->config[stream].link_mask &&
mcpdm->config[stream].link_mask != link_mask)
@@ -366,6 +390,20 @@ static int omap_mcpdm_prepare(struct snd_pcm_substream *substream,
struct snd_soc_dai *dai)
{
struct omap_mcpdm *mcpdm = snd_soc_dai_get_drvdata(dai);
+ struct pm_qos_request *pm_qos_req = &mcpdm->pm_qos_req;
+ int tx = (substream->stream == SNDRV_PCM_STREAM_PLAYBACK);
+ int stream1 = tx ? SNDRV_PCM_STREAM_PLAYBACK : SNDRV_PCM_STREAM_CAPTURE;
+ int stream2 = tx ? SNDRV_PCM_STREAM_CAPTURE : SNDRV_PCM_STREAM_PLAYBACK;
+ int latency = mcpdm->latency[stream2];
+
+ /* Prevent omap hardware from hitting off between FIFO fills */
+ if (!latency || mcpdm->latency[stream1] < latency)
+ latency = mcpdm->latency[stream1];
+
+ if (pm_qos_request_active(pm_qos_req))
+ pm_qos_update_request(pm_qos_req, latency);
+ else if (latency)
+ pm_qos_add_request(pm_qos_req, PM_QOS_CPU_DMA_LATENCY, latency);

if (!omap_mcpdm_active(mcpdm)) {
omap_mcpdm_start(mcpdm);
@@ -427,6 +465,9 @@ static int omap_mcpdm_remove(struct snd_soc_dai *dai)
free_irq(mcpdm->irq, (void *)mcpdm);
pm_runtime_disable(mcpdm->dev);

+ if (pm_qos_request_active(&mcpdm->pm_qos_req))
+ pm_qos_remove_request(&mcpdm->pm_qos_req);
+
return 0;
}

--
2.19.1




2018-12-14 12:06:41

by Greg Kroah-Hartman

[permalink] [raw]
Subject: [PATCH 4.19 056/142] spi: omap2-mcspi: Add missing suspend and resume calls

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit 91b9deefedf4c35a01027ce38bed7299605026a3 ]

I've been wondering still about omap2-mcspi related suspend and resume
flakeyness and looks like we're missing calls to spi_master_suspend()
and spi_master_resume(). Adding those and using pm_runtime_force_suspend()
and pm_runtime_force_resume() makes things work for suspend and resume
and allows us to stop using noirq suspend and resume.

And while at it, let's use SET_SYSTEM_SLEEP_PM_OPS to simplify things
further.

Signed-off-by: Tony Lindgren <[email protected]>
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/spi/spi-omap2-mcspi.c | 37 +++++++++++++++++++++++------------
1 file changed, 25 insertions(+), 12 deletions(-)

diff --git a/drivers/spi/spi-omap2-mcspi.c b/drivers/spi/spi-omap2-mcspi.c
index 508c61c669e7..e2be7da74343 100644
--- a/drivers/spi/spi-omap2-mcspi.c
+++ b/drivers/spi/spi-omap2-mcspi.c
@@ -1455,13 +1455,26 @@ static int omap2_mcspi_remove(struct platform_device *pdev)
/* work with hotplug and coldplug */
MODULE_ALIAS("platform:omap2_mcspi");

-#ifdef CONFIG_SUSPEND
-static int omap2_mcspi_suspend_noirq(struct device *dev)
+static int __maybe_unused omap2_mcspi_suspend(struct device *dev)
{
- return pinctrl_pm_select_sleep_state(dev);
+ struct spi_master *master = dev_get_drvdata(dev);
+ struct omap2_mcspi *mcspi = spi_master_get_devdata(master);
+ int error;
+
+ error = pinctrl_pm_select_sleep_state(dev);
+ if (error)
+ dev_warn(mcspi->dev, "%s: failed to set pins: %i\n",
+ __func__, error);
+
+ error = spi_master_suspend(master);
+ if (error)
+ dev_warn(mcspi->dev, "%s: master suspend failed: %i\n",
+ __func__, error);
+
+ return pm_runtime_force_suspend(dev);
}

-static int omap2_mcspi_resume_noirq(struct device *dev)
+static int __maybe_unused omap2_mcspi_resume(struct device *dev)
{
struct spi_master *master = dev_get_drvdata(dev);
struct omap2_mcspi *mcspi = spi_master_get_devdata(master);
@@ -1472,17 +1485,17 @@ static int omap2_mcspi_resume_noirq(struct device *dev)
dev_warn(mcspi->dev, "%s: failed to set pins: %i\n",
__func__, error);

- return 0;
-}
+ error = spi_master_resume(master);
+ if (error)
+ dev_warn(mcspi->dev, "%s: master resume failed: %i\n",
+ __func__, error);

-#else
-#define omap2_mcspi_suspend_noirq NULL
-#define omap2_mcspi_resume_noirq NULL
-#endif
+ return pm_runtime_force_resume(dev);
+}

static const struct dev_pm_ops omap2_mcspi_pm_ops = {
- .suspend_noirq = omap2_mcspi_suspend_noirq,
- .resume_noirq = omap2_mcspi_resume_noirq,
+ SET_SYSTEM_SLEEP_PM_OPS(omap2_mcspi_suspend,
+ omap2_mcspi_resume)
.runtime_resume = omap_mcspi_runtime_resume,
};

--
2.19.1




2018-12-14 12:06:49

by Greg Kroah-Hartman

[permalink] [raw]
Subject: [PATCH 4.19 079/142] ASoC: omap-dmic: Add pm_qos handling to avoid overruns with CPU_IDLE

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit ffdcc3638c58d55a6fa68b6e5dfd4fb4109652eb ]

We need to block sleep states which would require longer time to leave than
the time the DMA must react to the DMA request in order to keep the FIFO
serviced without overrun.

Signed-off-by: Peter Ujfalusi <[email protected]>
Acked-by: Jarkko Nikula <[email protected]>
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/soc/omap/omap-dmic.c | 9 +++++++++
1 file changed, 9 insertions(+)

diff --git a/sound/soc/omap/omap-dmic.c b/sound/soc/omap/omap-dmic.c
index fe966272bd0c..cba9645b6487 100644
--- a/sound/soc/omap/omap-dmic.c
+++ b/sound/soc/omap/omap-dmic.c
@@ -48,6 +48,8 @@ struct omap_dmic {
struct device *dev;
void __iomem *io_base;
struct clk *fclk;
+ struct pm_qos_request pm_qos_req;
+ int latency;
int fclk_freq;
int out_freq;
int clk_div;
@@ -124,6 +126,8 @@ static void omap_dmic_dai_shutdown(struct snd_pcm_substream *substream,

mutex_lock(&dmic->mutex);

+ pm_qos_remove_request(&dmic->pm_qos_req);
+
if (!dai->active)
dmic->active = 0;

@@ -228,6 +232,8 @@ static int omap_dmic_dai_hw_params(struct snd_pcm_substream *substream,
/* packet size is threshold * channels */
dma_data = snd_soc_dai_get_dma_data(dai, substream);
dma_data->maxburst = dmic->threshold * channels;
+ dmic->latency = (OMAP_DMIC_THRES_MAX - dmic->threshold) * USEC_PER_SEC /
+ params_rate(params);

return 0;
}
@@ -238,6 +244,9 @@ static int omap_dmic_dai_prepare(struct snd_pcm_substream *substream,
struct omap_dmic *dmic = snd_soc_dai_get_drvdata(dai);
u32 ctrl;

+ if (pm_qos_request_active(&dmic->pm_qos_req))
+ pm_qos_update_request(&dmic->pm_qos_req, dmic->latency);
+
/* Configure uplink threshold */
omap_dmic_write(dmic, OMAP_DMIC_FIFO_CTRL_REG, dmic->threshold);

--
2.19.1




2018-12-14 12:06:52

by Greg Kroah-Hartman

[permalink] [raw]
Subject: [PATCH 4.19 080/142] exportfs: do not read dentry after free

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit 2084ac6c505a58f7efdec13eba633c6aaa085ca5 ]

The function dentry_connected calls dput(dentry) to drop the previously
acquired reference to dentry. In this case, dentry can be released.
After that, IS_ROOT(dentry) checks the condition
(dentry == dentry->d_parent), which may result in a use-after-free bug.
This patch directly compares dentry with its parent obtained before
dropping the reference.

Fixes: a056cc8934c("exportfs: stop retrying once we race with
rename/remove")

Signed-off-by: Pan Bian <[email protected]>
Signed-off-by: Al Viro <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/exportfs/expfs.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/fs/exportfs/expfs.c b/fs/exportfs/expfs.c
index 645158dc33f1..63707abcbeb3 100644
--- a/fs/exportfs/expfs.c
+++ b/fs/exportfs/expfs.c
@@ -77,7 +77,7 @@ static bool dentry_connected(struct dentry *dentry)
struct dentry *parent = dget_parent(dentry);

dput(dentry);
- if (IS_ROOT(dentry)) {
+ if (dentry == parent) {
dput(parent);
return false;
}
--
2.19.1




2018-12-14 12:06:54

by Greg Kroah-Hartman

[permalink] [raw]
Subject: [PATCH 4.19 058/142] bpf: allocate local storage buffers using GFP_ATOMIC

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit 569a933b03f3c48b392fe67c0086b3a6b9306b5a ]

Naresh reported an issue with the non-atomic memory allocation of
cgroup local storage buffers:

[ 73.047526] BUG: sleeping function called from invalid context at
/srv/oe/build/tmp-rpb-glibc/work-shared/intel-corei7-64/kernel-source/mm/slab.h:421
[ 73.060915] in_atomic(): 1, irqs_disabled(): 0, pid: 3157, name: test_cgroup_sto
[ 73.068342] INFO: lockdep is turned off.
[ 73.072293] CPU: 2 PID: 3157 Comm: test_cgroup_sto Not tainted
4.20.0-rc2-next-20181113 #1
[ 73.080548] Hardware name: Supermicro SYS-5019S-ML/X11SSH-F, BIOS
2.0b 07/27/2017
[ 73.088018] Call Trace:
[ 73.090463] dump_stack+0x70/0xa5
[ 73.093783] ___might_sleep+0x152/0x240
[ 73.097619] __might_sleep+0x4a/0x80
[ 73.101191] __kmalloc_node+0x1cf/0x2f0
[ 73.105031] ? cgroup_storage_update_elem+0x46/0x90
[ 73.109909] cgroup_storage_update_elem+0x46/0x90

cgroup_storage_update_elem() (as well as other update map update
callbacks) is called with disabled preemption, so GFP_ATOMIC
allocation should be used: e.g. alloc_htab_elem() in hashtab.c.

Reported-by: Naresh Kamboju <[email protected]>
Tested-by: Naresh Kamboju <[email protected]>
Signed-off-by: Roman Gushchin <[email protected]>
Cc: Alexei Starovoitov <[email protected]>
Cc: Daniel Borkmann <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
kernel/bpf/local_storage.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/kernel/bpf/local_storage.c b/kernel/bpf/local_storage.c
index 830d7f095748..fc1605aee5ea 100644
--- a/kernel/bpf/local_storage.c
+++ b/kernel/bpf/local_storage.c
@@ -138,7 +138,8 @@ static int cgroup_storage_update_elem(struct bpf_map *map, void *_key,
return -ENOENT;

new = kmalloc_node(sizeof(struct bpf_storage_buffer) +
- map->value_size, __GFP_ZERO | GFP_USER,
+ map->value_size,
+ __GFP_ZERO | GFP_ATOMIC | __GFP_NOWARN,
map->numa_node);
if (!new)
return -ENOMEM;
--
2.19.1




2018-12-14 12:06:56

by Greg Kroah-Hartman

[permalink] [raw]
Subject: [PATCH 4.19 084/142] ipvs: call ip_vs_dst_notifier earlier than ipv6_dev_notf

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit 2a31e4bd9ad255ee40809b5c798c4b1c2b09703b ]

ip_vs_dst_event is supposed to clean up all dst used in ipvs'
destinations when a net dev is going down. But it works only
when the dst's dev is the same as the dev from the event.

Now with the same priority but late registration,
ip_vs_dst_notifier is always called later than ipv6_dev_notf
where the dst's dev is set to lo for NETDEV_DOWN event.

As the dst's dev lo is not the same as the dev from the event
in ip_vs_dst_event, ip_vs_dst_notifier doesn't actually work.
Also as these dst have to wait for dest_trash_timer to clean
them up. It would cause some non-permanent kernel warnings:

unregister_netdevice: waiting for br0 to become free. Usage count = 3

To fix it, call ip_vs_dst_notifier earlier than ipv6_dev_notf
by increasing its priority to ADDRCONF_NOTIFY_PRIORITY + 5.

Note that for ipv4 route fib_netdev_notifier doesn't set dst's
dev to lo in NETDEV_DOWN event, so this fix is only needed when
IP_VS_IPV6 is defined.

Fixes: 7a4f0761fce3 ("IPVS: init and cleanup restructuring")
Reported-by: Li Shuang <[email protected]>
Signed-off-by: Xin Long <[email protected]>
Acked-by: Julian Anastasov <[email protected]>
Acked-by: Simon Horman <[email protected]>
Signed-off-by: Pablo Neira Ayuso <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/netfilter/ipvs/ip_vs_ctl.c | 3 +++
1 file changed, 3 insertions(+)

diff --git a/net/netfilter/ipvs/ip_vs_ctl.c b/net/netfilter/ipvs/ip_vs_ctl.c
index 62eefea48973..518364f4abcc 100644
--- a/net/netfilter/ipvs/ip_vs_ctl.c
+++ b/net/netfilter/ipvs/ip_vs_ctl.c
@@ -3980,6 +3980,9 @@ static void __net_exit ip_vs_control_net_cleanup_sysctl(struct netns_ipvs *ipvs)

static struct notifier_block ip_vs_dst_notifier = {
.notifier_call = ip_vs_dst_event,
+#ifdef CONFIG_IP_VS_IPV6
+ .priority = ADDRCONF_NOTIFY_PRIORITY + 5,
+#endif
};

int __net_init ip_vs_control_net_init(struct netns_ipvs *ipvs)
--
2.19.1




2018-12-14 12:07:03

by Greg Kroah-Hartman

[permalink] [raw]
Subject: [PATCH 4.19 086/142] USB: omap_udc: fix crashes on probe error and module removal

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit 99f700366fcea1aa2fa3c49c99f371670c3c62f8 ]

We currently crash if usb_add_gadget_udc_release() fails, since the
udc->done is not initialized until in the remove function.
Furthermore, on module removal the udc data is accessed although
the release function is already triggered by usb_del_gadget_udc()
early in the function.

Fix by rewriting the release and remove functions, basically moving
all the cleanup into the release function, and doing the completion
only in the module removal case.

The patch fixes omap_udc module probe with a failing gadged, and also
allows the removal of omap_udc. Tested by running "modprobe omap_udc;
modprobe -r omap_udc" in a loop.

Signed-off-by: Aaro Koskinen <[email protected]>
Signed-off-by: Felipe Balbi <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/usb/gadget/udc/omap_udc.c | 50 ++++++++++++-------------------
1 file changed, 19 insertions(+), 31 deletions(-)

diff --git a/drivers/usb/gadget/udc/omap_udc.c b/drivers/usb/gadget/udc/omap_udc.c
index 1c77218c82af..240ccba44592 100644
--- a/drivers/usb/gadget/udc/omap_udc.c
+++ b/drivers/usb/gadget/udc/omap_udc.c
@@ -2593,9 +2593,22 @@ omap_ep_setup(char *name, u8 addr, u8 type,

static void omap_udc_release(struct device *dev)
{
- complete(udc->done);
+ pullup_disable(udc);
+ if (!IS_ERR_OR_NULL(udc->transceiver)) {
+ usb_put_phy(udc->transceiver);
+ udc->transceiver = NULL;
+ }
+ omap_writew(0, UDC_SYSCON1);
+ remove_proc_file();
+ if (udc->dc_clk) {
+ if (udc->clk_requested)
+ omap_udc_enable_clock(0);
+ clk_put(udc->hhc_clk);
+ clk_put(udc->dc_clk);
+ }
+ if (udc->done)
+ complete(udc->done);
kfree(udc);
- udc = NULL;
}

static int
@@ -2900,12 +2913,8 @@ static int omap_udc_probe(struct platform_device *pdev)
}

create_proc_file();
- status = usb_add_gadget_udc_release(&pdev->dev, &udc->gadget,
- omap_udc_release);
- if (!status)
- return 0;
-
- remove_proc_file();
+ return usb_add_gadget_udc_release(&pdev->dev, &udc->gadget,
+ omap_udc_release);

cleanup1:
kfree(udc);
@@ -2932,36 +2941,15 @@ static int omap_udc_remove(struct platform_device *pdev)
{
DECLARE_COMPLETION_ONSTACK(done);

- if (!udc)
- return -ENODEV;
-
- usb_del_gadget_udc(&udc->gadget);
- if (udc->driver)
- return -EBUSY;
-
udc->done = &done;

- pullup_disable(udc);
- if (!IS_ERR_OR_NULL(udc->transceiver)) {
- usb_put_phy(udc->transceiver);
- udc->transceiver = NULL;
- }
- omap_writew(0, UDC_SYSCON1);
-
- remove_proc_file();
+ usb_del_gadget_udc(&udc->gadget);

- if (udc->dc_clk) {
- if (udc->clk_requested)
- omap_udc_enable_clock(0);
- clk_put(udc->hhc_clk);
- clk_put(udc->dc_clk);
- }
+ wait_for_completion(&done);

release_mem_region(pdev->resource[0].start,
pdev->resource[0].end - pdev->resource[0].start + 1);

- wait_for_completion(&done);
-
return 0;
}

--
2.19.1




2018-12-14 12:07:12

by Greg Kroah-Hartman

[permalink] [raw]
Subject: [PATCH 4.19 070/142] Btrfs: send, fix infinite loop due to directory rename dependencies

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit a4390aee72713d9e73f1132bcdeb17d72fbbf974 ]

When doing an incremental send, due to the need of delaying directory move
(rename) operations we can end up in infinite loop at
apply_children_dir_moves().

An example scenario that triggers this problem is described below, where
directory names correspond to the numbers of their respective inodes.

Parent snapshot:

.
|--- 261/
|--- 271/
|--- 266/
|--- 259/
|--- 260/
| |--- 267
|
|--- 264/
| |--- 258/
| |--- 257/
|
|--- 265/
|--- 268/
|--- 269/
| |--- 262/
|
|--- 270/
|--- 272/
| |--- 263/
| |--- 275/
|
|--- 274/
|--- 273/

Send snapshot:

.
|-- 275/
|-- 274/
|-- 273/
|-- 262/
|-- 269/
|-- 258/
|-- 271/
|-- 268/
|-- 267/
|-- 270/
|-- 259/
| |-- 265/
|
|-- 272/
|-- 257/
|-- 260/
|-- 264/
|-- 263/
|-- 261/
|-- 266/

When processing inode 257 we delay its move (rename) operation because its
new parent in the send snapshot, inode 272, was not yet processed. Then
when processing inode 272, we delay the move operation for that inode
because inode 274 is its ancestor in the send snapshot. Finally we delay
the move operation for inode 274 when processing it because inode 275 is
its new parent in the send snapshot and was not yet moved.

When finishing processing inode 275, we start to do the move operations
that were previously delayed (at apply_children_dir_moves()), resulting in
the following iterations:

1) We issue the move operation for inode 274;

2) Because inode 262 depended on the move operation of inode 274 (it was
delayed because 274 is its ancestor in the send snapshot), we issue the
move operation for inode 262;

3) We issue the move operation for inode 272, because it was delayed by
inode 274 too (ancestor of 272 in the send snapshot);

4) We issue the move operation for inode 269 (it was delayed by 262);

5) We issue the move operation for inode 257 (it was delayed by 272);

6) We issue the move operation for inode 260 (it was delayed by 272);

7) We issue the move operation for inode 258 (it was delayed by 269);

8) We issue the move operation for inode 264 (it was delayed by 257);

9) We issue the move operation for inode 271 (it was delayed by 258);

10) We issue the move operation for inode 263 (it was delayed by 264);

11) We issue the move operation for inode 268 (it was delayed by 271);

12) We verify if we can issue the move operation for inode 270 (it was
delayed by 271). We detect a path loop in the current state, because
inode 267 needs to be moved first before we can issue the move
operation for inode 270. So we delay again the move operation for
inode 270, this time we will attempt to do it after inode 267 is
moved;

13) We issue the move operation for inode 261 (it was delayed by 263);

14) We verify if we can issue the move operation for inode 266 (it was
delayed by 263). We detect a path loop in the current state, because
inode 270 needs to be moved first before we can issue the move
operation for inode 266. So we delay again the move operation for
inode 266, this time we will attempt to do it after inode 270 is
moved (its move operation was delayed in step 12);

15) We issue the move operation for inode 267 (it was delayed by 268);

16) We verify if we can issue the move operation for inode 266 (it was
delayed by 270). We detect a path loop in the current state, because
inode 270 needs to be moved first before we can issue the move
operation for inode 266. So we delay again the move operation for
inode 266, this time we will attempt to do it after inode 270 is
moved (its move operation was delayed in step 12). So here we added
again the same delayed move operation that we added in step 14;

17) We attempt again to see if we can issue the move operation for inode
266, and as in step 16, we realize we can not due to a path loop in
the current state due to a dependency on inode 270. Again we delay
inode's 266 rename to happen after inode's 270 move operation, adding
the same dependency to the empty stack that we did in steps 14 and 16.
The next iteration will pick the same move dependency on the stack
(the only entry) and realize again there is still a path loop and then
again the same dependency to the stack, over and over, resulting in
an infinite loop.

So fix this by preventing adding the same move dependency entries to the
stack by removing each pending move record from the red black tree of
pending moves. This way the next call to get_pending_dir_moves() will
not return anything for the current parent inode.

A test case for fstests, with this reproducer, follows soon.

Signed-off-by: Robbie Ko <[email protected]>
Reviewed-by: Filipe Manana <[email protected]>
[Wrote changelog with example and more clear explanation]
Signed-off-by: Filipe Manana <[email protected]>
Signed-off-by: David Sterba <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/btrfs/send.c | 11 ++++++++---
1 file changed, 8 insertions(+), 3 deletions(-)

diff --git a/fs/btrfs/send.c b/fs/btrfs/send.c
index ba8950bfd9c7..84cb6e5ef36c 100644
--- a/fs/btrfs/send.c
+++ b/fs/btrfs/send.c
@@ -3344,7 +3344,8 @@ static void free_pending_move(struct send_ctx *sctx, struct pending_dir_move *m)
kfree(m);
}

-static void tail_append_pending_moves(struct pending_dir_move *moves,
+static void tail_append_pending_moves(struct send_ctx *sctx,
+ struct pending_dir_move *moves,
struct list_head *stack)
{
if (list_empty(&moves->list)) {
@@ -3355,6 +3356,10 @@ static void tail_append_pending_moves(struct pending_dir_move *moves,
list_add_tail(&moves->list, stack);
list_splice_tail(&list, stack);
}
+ if (!RB_EMPTY_NODE(&moves->node)) {
+ rb_erase(&moves->node, &sctx->pending_dir_moves);
+ RB_CLEAR_NODE(&moves->node);
+ }
}

static int apply_children_dir_moves(struct send_ctx *sctx)
@@ -3369,7 +3374,7 @@ static int apply_children_dir_moves(struct send_ctx *sctx)
return 0;

INIT_LIST_HEAD(&stack);
- tail_append_pending_moves(pm, &stack);
+ tail_append_pending_moves(sctx, pm, &stack);

while (!list_empty(&stack)) {
pm = list_first_entry(&stack, struct pending_dir_move, list);
@@ -3380,7 +3385,7 @@ static int apply_children_dir_moves(struct send_ctx *sctx)
goto out;
pm = get_pending_dir_moves(sctx, parent_ino);
if (pm)
- tail_append_pending_moves(pm, &stack);
+ tail_append_pending_moves(sctx, pm, &stack);
}
return 0;

--
2.19.1




2018-12-14 12:07:13

by Greg Kroah-Hartman

[permalink] [raw]
Subject: [PATCH 4.19 087/142] USB: omap_udc: fix omap_udc_start() on 15xx machines

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit 6ca6695f576b8453fe68865e84d25946d63b10ad ]

On OMAP 15xx machines there are no transceivers, and omap_udc_start()
always fails as it forgot to adjust the default return value.

Signed-off-by: Aaro Koskinen <[email protected]>
Signed-off-by: Felipe Balbi <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/usb/gadget/udc/omap_udc.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/usb/gadget/udc/omap_udc.c b/drivers/usb/gadget/udc/omap_udc.c
index 240ccba44592..33250e569af8 100644
--- a/drivers/usb/gadget/udc/omap_udc.c
+++ b/drivers/usb/gadget/udc/omap_udc.c
@@ -2041,7 +2041,7 @@ static inline int machine_without_vbus_sense(void)
static int omap_udc_start(struct usb_gadget *g,
struct usb_gadget_driver *driver)
{
- int status = -ENODEV;
+ int status;
struct omap_ep *ep;
unsigned long flags;

@@ -2079,6 +2079,7 @@ static int omap_udc_start(struct usb_gadget *g,
goto done;
}
} else {
+ status = 0;
if (can_pullup(udc))
pullup_enable(udc);
else
--
2.19.1




2018-12-14 12:07:16

by Greg Kroah-Hartman

[permalink] [raw]
Subject: [PATCH 4.19 090/142] thunderbolt: Prevent root port runtime suspend during NVM upgrade

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit 1830b6eeda1fed42d85f2388f79c926331a9b2d0 ]

During NVM upgrade process the host router is hot-removed for a short
while. During this time it is possible that the root port is moved into
D3cold which would be fine if the root port could trigger PME on itself.
However, many systems actually do not implement it so what happens is
that the root port goes into D3cold and never wakes up unless userspace
does PCI config space access, such as running 'lscpi'.

For this reason we explicitly prevent the root port from runtime
suspending during NVM upgrade.

Signed-off-by: Mika Westerberg <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/thunderbolt/switch.c | 40 ++++++++++++++++++++++++++++++++++--
1 file changed, 38 insertions(+), 2 deletions(-)

diff --git a/drivers/thunderbolt/switch.c b/drivers/thunderbolt/switch.c
index 7442bc4c6433..dd9ae6f5d19c 100644
--- a/drivers/thunderbolt/switch.c
+++ b/drivers/thunderbolt/switch.c
@@ -864,6 +864,30 @@ static ssize_t key_store(struct device *dev, struct device_attribute *attr,
}
static DEVICE_ATTR(key, 0600, key_show, key_store);

+static void nvm_authenticate_start(struct tb_switch *sw)
+{
+ struct pci_dev *root_port;
+
+ /*
+ * During host router NVM upgrade we should not allow root port to
+ * go into D3cold because some root ports cannot trigger PME
+ * itself. To be on the safe side keep the root port in D0 during
+ * the whole upgrade process.
+ */
+ root_port = pci_find_pcie_root_port(sw->tb->nhi->pdev);
+ if (root_port)
+ pm_runtime_get_noresume(&root_port->dev);
+}
+
+static void nvm_authenticate_complete(struct tb_switch *sw)
+{
+ struct pci_dev *root_port;
+
+ root_port = pci_find_pcie_root_port(sw->tb->nhi->pdev);
+ if (root_port)
+ pm_runtime_put(&root_port->dev);
+}
+
static ssize_t nvm_authenticate_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
@@ -913,10 +937,18 @@ static ssize_t nvm_authenticate_store(struct device *dev,

sw->nvm->authenticating = true;

- if (!tb_route(sw))
+ if (!tb_route(sw)) {
+ /*
+ * Keep root port from suspending as long as the
+ * NVM upgrade process is running.
+ */
+ nvm_authenticate_start(sw);
ret = nvm_authenticate_host(sw);
- else
+ if (ret)
+ nvm_authenticate_complete(sw);
+ } else {
ret = nvm_authenticate_device(sw);
+ }
pm_runtime_mark_last_busy(&sw->dev);
pm_runtime_put_autosuspend(&sw->dev);
}
@@ -1336,6 +1368,10 @@ static int tb_switch_add_dma_port(struct tb_switch *sw)
if (ret <= 0)
return ret;

+ /* Now we can allow root port to suspend again */
+ if (!tb_route(sw))
+ nvm_authenticate_complete(sw);
+
if (status) {
tb_sw_info(sw, "switch flash authentication failed\n");
tb_switch_set_uuid(sw);
--
2.19.1




2018-12-14 12:07:19

by Greg Kroah-Hartman

[permalink] [raw]
Subject: [PATCH 4.19 045/142] s390/cio: Fix cleanup when unsupported IDA format is used

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit b89e242eee8d4cd8261d8d821c62c5d1efc454d0 ]

Direct returns from within a loop are rude, but it doesn't mean it gets
to avoid releasing the memory acquired beforehand.

Signed-off-by: Eric Farman <[email protected]>
Message-Id: <[email protected]>
Reviewed-by: Farhan Ali <[email protected]>
Reviewed-by: Pierre Morel <[email protected]>
Acked-by: Halil Pasic <[email protected]>
Signed-off-by: Cornelia Huck <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/s390/cio/vfio_ccw_cp.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/s390/cio/vfio_ccw_cp.c b/drivers/s390/cio/vfio_ccw_cp.c
index ef5ab45d94b3..70a006ba4d05 100644
--- a/drivers/s390/cio/vfio_ccw_cp.c
+++ b/drivers/s390/cio/vfio_ccw_cp.c
@@ -387,8 +387,10 @@ static int ccwchain_calc_length(u64 iova, struct channel_program *cp)
* orb specified one of the unsupported formats, we defer
* checking for IDAWs in unsupported formats to here.
*/
- if ((!cp->orb.cmd.c64 || cp->orb.cmd.i2k) && ccw_is_idal(ccw))
+ if ((!cp->orb.cmd.c64 || cp->orb.cmd.i2k) && ccw_is_idal(ccw)) {
+ kfree(p);
return -EOPNOTSUPP;
+ }

if ((!ccw_is_chain(ccw)) && (!ccw_is_tic(ccw)))
break;
--
2.19.1




2018-12-14 12:07:40

by Greg Kroah-Hartman

[permalink] [raw]
Subject: [PATCH 4.19 105/142] fscache: Fix race in fscache_op_complete() due to split atomic_sub & read

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit 3f2b7b9035107d6096ea438ea3d97dcf0481b6d2 ]

The code in fscache_retrieval_complete is using atomic_sub followed by an
atomic_read:

atomic_sub(n_pages, &op->n_pages);
if (atomic_read(&op->n_pages) <= 0)
fscache_op_complete(&op->op, true);

This causes two threads doing a decrement of n_pages to race with each
other seeing the op->refcount 0 at same time - and they end up calling
fscache_op_complete() in both the threads leading to an assertion failure.

Fix this by using atomic_sub_return_relaxed() instead of two calls. Note
that I'm using 'relaxed' rather than, say, 'release' as there aren't
multiple variables that appear to need ordering across the release.

The oops looks something like:

FS-Cache: Assertion failed
FS-Cache: 0 > 0 is false
...
kernel BUG at /usr/src/linux-4.4.0/fs/fscache/operation.c:449!
...
Workqueue: fscache_operation fscache_op_work_func [fscache]
...
RIP: 0010:[<ffffffffc037eacd>] fscache_op_complete+0x10d/0x180 [fscache]
...
Call Trace:
[<ffffffffc1464cf9>] cachefiles_read_copier+0x3a9/0x410 [cachefiles]
[<ffffffffc037e272>] fscache_op_work_func+0x22/0x50 [fscache]
[<ffffffff81096da0>] process_one_work+0x150/0x3f0
[<ffffffff8109751a>] worker_thread+0x11a/0x470
[<ffffffff81808e59>] ? __schedule+0x359/0x980
[<ffffffff81097400>] ? rescuer_thread+0x310/0x310
[<ffffffff8109cdd6>] kthread+0xd6/0xf0
[<ffffffff8109cd00>] ? kthread_park+0x60/0x60
[<ffffffff8180d0cf>] ret_from_fork+0x3f/0x70
[<ffffffff8109cd00>] ? kthread_park+0x60/0x60

This seen this in 4.4.x kernels and the same bug affects fscache in latest
upstreams kernels.

Fixes: 1bb4b7f98f36 ("FS-Cache: The retrieval remaining-pages counter needs to be atomic_t")
Signed-off-by: Kiran Kumar Modukuri <[email protected]>
Signed-off-by: David Howells <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
include/linux/fscache-cache.h | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/include/linux/fscache-cache.h b/include/linux/fscache-cache.h
index 34cf0fdd7dc7..610815e3f1aa 100644
--- a/include/linux/fscache-cache.h
+++ b/include/linux/fscache-cache.h
@@ -196,8 +196,7 @@ static inline void fscache_enqueue_retrieval(struct fscache_retrieval *op)
static inline void fscache_retrieval_complete(struct fscache_retrieval *op,
int n_pages)
{
- atomic_sub(n_pages, &op->n_pages);
- if (atomic_read(&op->n_pages) <= 0)
+ if (atomic_sub_return_relaxed(n_pages, &op->n_pages) <= 0)
fscache_op_complete(&op->op, false);
}

--
2.19.1




2018-12-14 12:07:40

by Greg Kroah-Hartman

[permalink] [raw]
Subject: [PATCH 4.19 075/142] RDMA/rdmavt: Fix rvt_create_ah function signature

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit 4f32fb921b153ae9ea280e02a3e91509fffc03d3 ]

rdmavt uses a crazy system that looses the type checking when assinging
functions to struct ib_device function pointers. Because of this the
signature to this function was not changed when the below commit revised
things.

Fix the signature so we are not calling a function pointer with a
mismatched signature.

Fixes: 477864c8fcd9 ("IB/core: Let create_ah return extended response to user")
Signed-off-by: Kamal Heib <[email protected]>
Reviewed-by: Dennis Dalessandro <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/infiniband/sw/rdmavt/ah.c | 4 +++-
drivers/infiniband/sw/rdmavt/ah.h | 3 ++-
2 files changed, 5 insertions(+), 2 deletions(-)

diff --git a/drivers/infiniband/sw/rdmavt/ah.c b/drivers/infiniband/sw/rdmavt/ah.c
index 89ec0f64abfc..084bb4baebb5 100644
--- a/drivers/infiniband/sw/rdmavt/ah.c
+++ b/drivers/infiniband/sw/rdmavt/ah.c
@@ -91,13 +91,15 @@ EXPORT_SYMBOL(rvt_check_ah);
* rvt_create_ah - create an address handle
* @pd: the protection domain
* @ah_attr: the attributes of the AH
+ * @udata: pointer to user's input output buffer information.
*
* This may be called from interrupt context.
*
* Return: newly allocated ah
*/
struct ib_ah *rvt_create_ah(struct ib_pd *pd,
- struct rdma_ah_attr *ah_attr)
+ struct rdma_ah_attr *ah_attr,
+ struct ib_udata *udata)
{
struct rvt_ah *ah;
struct rvt_dev_info *dev = ib_to_rvt(pd->device);
diff --git a/drivers/infiniband/sw/rdmavt/ah.h b/drivers/infiniband/sw/rdmavt/ah.h
index 16105af99189..25271b48a683 100644
--- a/drivers/infiniband/sw/rdmavt/ah.h
+++ b/drivers/infiniband/sw/rdmavt/ah.h
@@ -51,7 +51,8 @@
#include <rdma/rdma_vt.h>

struct ib_ah *rvt_create_ah(struct ib_pd *pd,
- struct rdma_ah_attr *ah_attr);
+ struct rdma_ah_attr *ah_attr,
+ struct ib_udata *udata);
int rvt_destroy_ah(struct ib_ah *ibah);
int rvt_modify_ah(struct ib_ah *ibah, struct rdma_ah_attr *ah_attr);
int rvt_query_ah(struct ib_ah *ibah, struct rdma_ah_attr *ah_attr);
--
2.19.1




2018-12-14 12:07:41

by Greg Kroah-Hartman

[permalink] [raw]
Subject: [PATCH 4.19 104/142] cachefiles: Fix an assertion failure when trying to update a failed object

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit e6bc06faf64a83384cc0abc537df954c9d3ff942 ]

If cachefiles gets an error other then ENOENT when trying to look up an
object in the cache (in this case, EACCES), the object state machine will
eventually transition to the DROP_OBJECT state.

This state invokes fscache_drop_object() which tries to sync the auxiliary
data with the cache (this is done lazily since commit 402cb8dda949d) on an
incomplete cache object struct.

The problem comes when cachefiles_update_object_xattr() is called to
rewrite the xattr holding the data. There's an assertion there that the
cache object points to a dentry as we're going to update its xattr. The
assertion trips, however, as dentry didn't get set.

Fix the problem by skipping the update in cachefiles if the object doesn't
refer to a dentry. A better way to do it could be to skip the update from
the DROP_OBJECT state handler in fscache, but that might deny the cache the
opportunity to update intermediate state.

If this error occurs, the kernel log includes lines that look like the
following:

CacheFiles: Lookup failed error -13
CacheFiles:
CacheFiles: Assertion failed
------------[ cut here ]------------
kernel BUG at fs/cachefiles/xattr.c:138!
...
Workqueue: fscache_object fscache_object_work_func [fscache]
RIP: 0010:cachefiles_update_object_xattr.cold.4+0x18/0x1a [cachefiles]
...
Call Trace:
cachefiles_update_object+0xdd/0x1c0 [cachefiles]
fscache_update_aux_data+0x23/0x30 [fscache]
fscache_drop_object+0x18e/0x1c0 [fscache]
fscache_object_work_func+0x74/0x2b0 [fscache]
process_one_work+0x18d/0x340
worker_thread+0x2e/0x390
? pwq_unbound_release_workfn+0xd0/0xd0
kthread+0x112/0x130
? kthread_bind+0x30/0x30
ret_from_fork+0x35/0x40

Note that there are actually two issues here: (1) EACCES happened on a
cache object and (2) an oops occurred. I think that the second is a
consequence of the first (it certainly looks like it ought to be). This
patch only deals with the second.

Fixes: 402cb8dda949 ("fscache: Attach the index key and aux data to the cookie")
Reported-by: Zhibin Li <[email protected]>
Signed-off-by: David Howells <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/cachefiles/xattr.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/fs/cachefiles/xattr.c b/fs/cachefiles/xattr.c
index 0a29a00aed2e..511e6c68156a 100644
--- a/fs/cachefiles/xattr.c
+++ b/fs/cachefiles/xattr.c
@@ -135,7 +135,8 @@ int cachefiles_update_object_xattr(struct cachefiles_object *object,
struct dentry *dentry = object->dentry;
int ret;

- ASSERT(dentry);
+ if (!dentry)
+ return -ESTALE;

_enter("%p,#%d", object, auxdata->len);

--
2.19.1




2018-12-14 12:07:46

by Greg Kroah-Hartman

[permalink] [raw]
Subject: [PATCH 4.19 113/142] Revert "xen/balloon: Mark unallocated host memory as UNUSABLE"

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit 123664101aa2156d05251704fc63f9bcbf77741a ]

This reverts commit b3cf8528bb21febb650a7ecbf080d0647be40b9f.

That commit unintentionally broke Xen balloon memory hotplug with
"hotplug_unpopulated" set to 1. As long as "System RAM" resource
got assigned under a new "Unusable memory" resource in IO/Mem tree
any attempt to online this memory would fail due to general kernel
restrictions on having "System RAM" resources as 1st level only.

The original issue that commit has tried to workaround fa564ad96366
("x86/PCI: Enable a 64bit BAR on AMD Family 15h (Models 00-1f, 30-3f,
60-7f)") also got amended by the following 03a551734 ("x86/PCI: Move
and shrink AMD 64-bit window to avoid conflict") which made the
original fix to Xen ballooning unnecessary.

Signed-off-by: Igor Druzhinin <[email protected]>
Reviewed-by: Boris Ostrovsky <[email protected]>
Signed-off-by: Juergen Gross <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/x86/xen/enlighten.c | 78 ----------------------------------------
arch/x86/xen/setup.c | 6 ++--
drivers/xen/balloon.c | 65 +++++----------------------------
include/xen/balloon.h | 5 ---
4 files changed, 13 insertions(+), 141 deletions(-)

diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c
index 2eeddd814653..c6c7c9b7b5c1 100644
--- a/arch/x86/xen/enlighten.c
+++ b/arch/x86/xen/enlighten.c
@@ -7,7 +7,6 @@

#include <xen/features.h>
#include <xen/page.h>
-#include <xen/interface/memory.h>

#include <asm/xen/hypercall.h>
#include <asm/xen/hypervisor.h>
@@ -343,80 +342,3 @@ void xen_arch_unregister_cpu(int num)
}
EXPORT_SYMBOL(xen_arch_unregister_cpu);
#endif
-
-#ifdef CONFIG_XEN_BALLOON_MEMORY_HOTPLUG
-void __init arch_xen_balloon_init(struct resource *hostmem_resource)
-{
- struct xen_memory_map memmap;
- int rc;
- unsigned int i, last_guest_ram;
- phys_addr_t max_addr = PFN_PHYS(max_pfn);
- struct e820_table *xen_e820_table;
- const struct e820_entry *entry;
- struct resource *res;
-
- if (!xen_initial_domain())
- return;
-
- xen_e820_table = kmalloc(sizeof(*xen_e820_table), GFP_KERNEL);
- if (!xen_e820_table)
- return;
-
- memmap.nr_entries = ARRAY_SIZE(xen_e820_table->entries);
- set_xen_guest_handle(memmap.buffer, xen_e820_table->entries);
- rc = HYPERVISOR_memory_op(XENMEM_machine_memory_map, &memmap);
- if (rc) {
- pr_warn("%s: Can't read host e820 (%d)\n", __func__, rc);
- goto out;
- }
-
- last_guest_ram = 0;
- for (i = 0; i < memmap.nr_entries; i++) {
- if (xen_e820_table->entries[i].addr >= max_addr)
- break;
- if (xen_e820_table->entries[i].type == E820_TYPE_RAM)
- last_guest_ram = i;
- }
-
- entry = &xen_e820_table->entries[last_guest_ram];
- if (max_addr >= entry->addr + entry->size)
- goto out; /* No unallocated host RAM. */
-
- hostmem_resource->start = max_addr;
- hostmem_resource->end = entry->addr + entry->size;
-
- /*
- * Mark non-RAM regions between the end of dom0 RAM and end of host RAM
- * as unavailable. The rest of that region can be used for hotplug-based
- * ballooning.
- */
- for (; i < memmap.nr_entries; i++) {
- entry = &xen_e820_table->entries[i];
-
- if (entry->type == E820_TYPE_RAM)
- continue;
-
- if (entry->addr >= hostmem_resource->end)
- break;
-
- res = kzalloc(sizeof(*res), GFP_KERNEL);
- if (!res)
- goto out;
-
- res->name = "Unavailable host RAM";
- res->start = entry->addr;
- res->end = (entry->addr + entry->size < hostmem_resource->end) ?
- entry->addr + entry->size : hostmem_resource->end;
- rc = insert_resource(hostmem_resource, res);
- if (rc) {
- pr_warn("%s: Can't insert [%llx - %llx) (%d)\n",
- __func__, res->start, res->end, rc);
- kfree(res);
- goto out;
- }
- }
-
- out:
- kfree(xen_e820_table);
-}
-#endif /* CONFIG_XEN_BALLOON_MEMORY_HOTPLUG */
diff --git a/arch/x86/xen/setup.c b/arch/x86/xen/setup.c
index 1163e33121fb..075ed47993bb 100644
--- a/arch/x86/xen/setup.c
+++ b/arch/x86/xen/setup.c
@@ -808,6 +808,7 @@ char * __init xen_memory_setup(void)
addr = xen_e820_table.entries[0].addr;
size = xen_e820_table.entries[0].size;
while (i < xen_e820_table.nr_entries) {
+ bool discard = false;

chunk_size = size;
type = xen_e820_table.entries[i].type;
@@ -823,10 +824,11 @@ char * __init xen_memory_setup(void)
xen_add_extra_mem(pfn_s, n_pfns);
xen_max_p2m_pfn = pfn_s + n_pfns;
} else
- type = E820_TYPE_UNUSABLE;
+ discard = true;
}

- xen_align_and_add_e820_region(addr, chunk_size, type);
+ if (!discard)
+ xen_align_and_add_e820_region(addr, chunk_size, type);

addr += chunk_size;
size -= chunk_size;
diff --git a/drivers/xen/balloon.c b/drivers/xen/balloon.c
index e12bb256036f..7ab6caef599c 100644
--- a/drivers/xen/balloon.c
+++ b/drivers/xen/balloon.c
@@ -251,25 +251,10 @@ static void release_memory_resource(struct resource *resource)
kfree(resource);
}

-/*
- * Host memory not allocated to dom0. We can use this range for hotplug-based
- * ballooning.
- *
- * It's a type-less resource. Setting IORESOURCE_MEM will make resource
- * management algorithms (arch_remove_reservations()) look into guest e820,
- * which we don't want.
- */
-static struct resource hostmem_resource = {
- .name = "Host RAM",
-};
-
-void __attribute__((weak)) __init arch_xen_balloon_init(struct resource *res)
-{}
-
static struct resource *additional_memory_resource(phys_addr_t size)
{
- struct resource *res, *res_hostmem;
- int ret = -ENOMEM;
+ struct resource *res;
+ int ret;

res = kzalloc(sizeof(*res), GFP_KERNEL);
if (!res)
@@ -278,42 +263,13 @@ static struct resource *additional_memory_resource(phys_addr_t size)
res->name = "System RAM";
res->flags = IORESOURCE_SYSTEM_RAM | IORESOURCE_BUSY;

- res_hostmem = kzalloc(sizeof(*res), GFP_KERNEL);
- if (res_hostmem) {
- /* Try to grab a range from hostmem */
- res_hostmem->name = "Host memory";
- ret = allocate_resource(&hostmem_resource, res_hostmem,
- size, 0, -1,
- PAGES_PER_SECTION * PAGE_SIZE, NULL, NULL);
- }
-
- if (!ret) {
- /*
- * Insert this resource into iomem. Because hostmem_resource
- * tracks portion of guest e820 marked as UNUSABLE noone else
- * should try to use it.
- */
- res->start = res_hostmem->start;
- res->end = res_hostmem->end;
- ret = insert_resource(&iomem_resource, res);
- if (ret < 0) {
- pr_err("Can't insert iomem_resource [%llx - %llx]\n",
- res->start, res->end);
- release_memory_resource(res_hostmem);
- res_hostmem = NULL;
- res->start = res->end = 0;
- }
- }
-
- if (ret) {
- ret = allocate_resource(&iomem_resource, res,
- size, 0, -1,
- PAGES_PER_SECTION * PAGE_SIZE, NULL, NULL);
- if (ret < 0) {
- pr_err("Cannot allocate new System RAM resource\n");
- kfree(res);
- return NULL;
- }
+ ret = allocate_resource(&iomem_resource, res,
+ size, 0, -1,
+ PAGES_PER_SECTION * PAGE_SIZE, NULL, NULL);
+ if (ret < 0) {
+ pr_err("Cannot allocate new System RAM resource\n");
+ kfree(res);
+ return NULL;
}

#ifdef CONFIG_SPARSEMEM
@@ -325,7 +281,6 @@ static struct resource *additional_memory_resource(phys_addr_t size)
pr_err("New System RAM resource outside addressable RAM (%lu > %lu)\n",
pfn, limit);
release_memory_resource(res);
- release_memory_resource(res_hostmem);
return NULL;
}
}
@@ -747,8 +702,6 @@ static int __init balloon_init(void)
set_online_page_callback(&xen_online_page);
register_memory_notifier(&xen_memory_nb);
register_sysctl_table(xen_root);
-
- arch_xen_balloon_init(&hostmem_resource);
#endif

#ifdef CONFIG_XEN_PV
diff --git a/include/xen/balloon.h b/include/xen/balloon.h
index 61f410fd74e4..4914b93a23f2 100644
--- a/include/xen/balloon.h
+++ b/include/xen/balloon.h
@@ -44,8 +44,3 @@ static inline void xen_balloon_init(void)
{
}
#endif
-
-#ifdef CONFIG_XEN_BALLOON_MEMORY_HOTPLUG
-struct resource;
-void arch_xen_balloon_init(struct resource *hostmem_resource);
-#endif
--
2.19.1




2018-12-14 12:07:47

by Greg Kroah-Hartman

[permalink] [raw]
Subject: [PATCH 4.19 051/142] ASoC: qcom: Set dai_link id to each dai_link

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit 67fd1437d11620de8768b22fe20942e752ed52e9 ]

Frontend dai_link id is used for closing ADM sessions.
During concurrent usecase when one session is closed,
it closes other ADM session associated with other usecase
too. Dai_link->id should always point to Frontend dai id.
Set cpu_dai id as dai_link id to fix the issue.

Signed-off-by: Rohit kumar <[email protected]>
Acked-by: Srinivas Kandagatla <[email protected]>
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/soc/qcom/common.c | 9 ++++++---
1 file changed, 6 insertions(+), 3 deletions(-)

diff --git a/sound/soc/qcom/common.c b/sound/soc/qcom/common.c
index eb1b9da05dd4..4715527054e5 100644
--- a/sound/soc/qcom/common.c
+++ b/sound/soc/qcom/common.c
@@ -13,6 +13,7 @@ int qcom_snd_parse_of(struct snd_soc_card *card)
struct device_node *cpu = NULL;
struct device *dev = card->dev;
struct snd_soc_dai_link *link;
+ struct of_phandle_args args;
int ret, num_links;

ret = snd_soc_of_parse_card_name(card, "model");
@@ -47,12 +48,14 @@ int qcom_snd_parse_of(struct snd_soc_card *card)
goto err;
}

- link->cpu_of_node = of_parse_phandle(cpu, "sound-dai", 0);
- if (!link->cpu_of_node) {
+ ret = of_parse_phandle_with_args(cpu, "sound-dai",
+ "#sound-dai-cells", 0, &args);
+ if (ret) {
dev_err(card->dev, "error getting cpu phandle\n");
- ret = -EINVAL;
goto err;
}
+ link->cpu_of_node = args.np;
+ link->id = args.args[0];

ret = snd_soc_of_get_dai_name(cpu, &link->cpu_dai_name);
if (ret) {
--
2.19.1




2018-12-14 12:07:55

by Greg Kroah-Hartman

[permalink] [raw]
Subject: [PATCH 4.19 097/142] KVM: VMX: Update shared MSRs to be saved/restored on MSR_EFER.LMA changes

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit f48b4711dd6e1cf282f9dfd159c14a305909c97c ]

When guest transitions from/to long-mode by modifying MSR_EFER.LMA,
the list of shared MSRs to be saved/restored on guest<->host
transitions is updated (See vmx_set_efer() call to setup_msrs()).

On every entry to guest, vcpu_enter_guest() calls
vmx_prepare_switch_to_guest(). This function should also take care
of setting the shared MSRs to be saved/restored. However, the
function does nothing in case we are already running with loaded
guest state (vmx->loaded_cpu_state != NULL).

This means that even when guest modifies MSR_EFER.LMA which results
in updating the list of shared MSRs, it isn't being taken into account
by vmx_prepare_switch_to_guest() because it happens while we are
running with loaded guest state.

To fix above mentioned issue, add a flag to mark that the list of
shared MSRs has been updated and modify vmx_prepare_switch_to_guest()
to set shared MSRs when running with host state *OR* list of shared
MSRs has been updated.

Note that this issue was mistakenly introduced by commit
678e315e78a7 ("KVM: vmx: add dedicated utility to access guest's
kernel_gs_base") because previously vmx_set_efer() always called
vmx_load_host_state() which resulted in vmx_prepare_switch_to_guest() to
set shared MSRs.

Fixes: 678e315e78a7 ("KVM: vmx: add dedicated utility to access guest's kernel_gs_base")
Reported-by: Eyal Moscovici <[email protected]>
Reviewed-by: Mihai Carabas <[email protected]>
Reviewed-by: Liam Merwick <[email protected]>
Reviewed-by: Jim Mattson <[email protected]>
Signed-off-by: Liran Alon <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/x86/kvm/vmx.c | 21 ++++++++++++++++-----
1 file changed, 16 insertions(+), 5 deletions(-)

diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c
index e55f7a90d4b2..b1aef90aab91 100644
--- a/arch/x86/kvm/vmx.c
+++ b/arch/x86/kvm/vmx.c
@@ -962,6 +962,7 @@ struct vcpu_vmx {
struct shared_msr_entry *guest_msrs;
int nmsrs;
int save_nmsrs;
+ bool guest_msrs_dirty;
unsigned long host_idt_base;
#ifdef CONFIG_X86_64
u64 msr_host_kernel_gs_base;
@@ -2874,6 +2875,20 @@ static void vmx_prepare_switch_to_guest(struct kvm_vcpu *vcpu)

vmx->req_immediate_exit = false;

+ /*
+ * Note that guest MSRs to be saved/restored can also be changed
+ * when guest state is loaded. This happens when guest transitions
+ * to/from long-mode by setting MSR_EFER.LMA.
+ */
+ if (!vmx->loaded_cpu_state || vmx->guest_msrs_dirty) {
+ vmx->guest_msrs_dirty = false;
+ for (i = 0; i < vmx->save_nmsrs; ++i)
+ kvm_set_shared_msr(vmx->guest_msrs[i].index,
+ vmx->guest_msrs[i].data,
+ vmx->guest_msrs[i].mask);
+
+ }
+
if (vmx->loaded_cpu_state)
return;

@@ -2934,11 +2949,6 @@ static void vmx_prepare_switch_to_guest(struct kvm_vcpu *vcpu)
vmcs_writel(HOST_GS_BASE, gs_base);
host_state->gs_base = gs_base;
}
-
- for (i = 0; i < vmx->save_nmsrs; ++i)
- kvm_set_shared_msr(vmx->guest_msrs[i].index,
- vmx->guest_msrs[i].data,
- vmx->guest_msrs[i].mask);
}

static void vmx_prepare_switch_to_host(struct vcpu_vmx *vmx)
@@ -3418,6 +3428,7 @@ static void setup_msrs(struct vcpu_vmx *vmx)
move_msr_up(vmx, index, save_nmsrs++);

vmx->save_nmsrs = save_nmsrs;
+ vmx->guest_msrs_dirty = true;

if (cpu_has_vmx_msr_bitmap())
vmx_update_msr_bitmap(&vmx->vcpu);
--
2.19.1




2018-12-14 12:08:01

by Greg Kroah-Hartman

[permalink] [raw]
Subject: [PATCH 4.19 128/142] debugobjects: avoid recursive calls with kmemleak

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit 8de456cf87ba863e028c4dd01bae44255ce3d835 ]

CONFIG_DEBUG_OBJECTS_RCU_HEAD does not play well with kmemleak due to
recursive calls.

fill_pool
kmemleak_ignore
make_black_object
put_object
__call_rcu (kernel/rcu/tree.c)
debug_rcu_head_queue
debug_object_activate
debug_object_init
fill_pool
kmemleak_ignore
make_black_object
...

So add SLAB_NOLEAKTRACE to kmem_cache_create() to not register newly
allocated debug objects at all.

Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Qian Cai <[email protected]>
Suggested-by: Catalin Marinas <[email protected]>
Acked-by: Waiman Long <[email protected]>
Acked-by: Catalin Marinas <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Yang Shi <[email protected]>
Cc: Arnd Bergmann <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
lib/debugobjects.c | 5 ++---
1 file changed, 2 insertions(+), 3 deletions(-)

diff --git a/lib/debugobjects.c b/lib/debugobjects.c
index 70935ed91125..14afeeb7d6ef 100644
--- a/lib/debugobjects.c
+++ b/lib/debugobjects.c
@@ -135,7 +135,6 @@ static void fill_pool(void)
if (!new)
return;

- kmemleak_ignore(new);
raw_spin_lock_irqsave(&pool_lock, flags);
hlist_add_head(&new->node, &obj_pool);
debug_objects_allocated++;
@@ -1128,7 +1127,6 @@ static int __init debug_objects_replace_static_objects(void)
obj = kmem_cache_zalloc(obj_cache, GFP_KERNEL);
if (!obj)
goto free;
- kmemleak_ignore(obj);
hlist_add_head(&obj->node, &objects);
}

@@ -1184,7 +1182,8 @@ void __init debug_objects_mem_init(void)

obj_cache = kmem_cache_create("debug_objects_cache",
sizeof (struct debug_obj), 0,
- SLAB_DEBUG_OBJECTS, NULL);
+ SLAB_DEBUG_OBJECTS | SLAB_NOLEAKTRACE,
+ NULL);

if (!obj_cache || debug_objects_replace_static_objects()) {
debug_objects_enabled = 0;
--
2.19.1




2018-12-14 12:08:03

by Greg Kroah-Hartman

[permalink] [raw]
Subject: [PATCH 4.19 082/142] bpf: fix check of allowed specifiers in bpf_trace_printk

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit 1efb6ee3edea57f57f9fb05dba8dcb3f7333f61f ]

A format string consisting of "%p" or "%s" followed by an invalid
specifier (e.g. "%p%\n" or "%s%") could pass the check which
would make format_decode (lib/vsprintf.c) to warn.

Fixes: 9c959c863f82 ("tracing: Allow BPF programs to call bpf_trace_printk()")
Reported-by: [email protected]
Signed-off-by: Martynas Pumputis <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
kernel/trace/bpf_trace.c | 8 +++++---
1 file changed, 5 insertions(+), 3 deletions(-)

diff --git a/kernel/trace/bpf_trace.c b/kernel/trace/bpf_trace.c
index 08fcfe440c63..9864a35c8bb5 100644
--- a/kernel/trace/bpf_trace.c
+++ b/kernel/trace/bpf_trace.c
@@ -196,11 +196,13 @@ BPF_CALL_5(bpf_trace_printk, char *, fmt, u32, fmt_size, u64, arg1,
i++;
} else if (fmt[i] == 'p' || fmt[i] == 's') {
mod[fmt_cnt]++;
- i++;
- if (!isspace(fmt[i]) && !ispunct(fmt[i]) && fmt[i] != 0)
+ /* disallow any further format extensions */
+ if (fmt[i + 1] != 0 &&
+ !isspace(fmt[i + 1]) &&
+ !ispunct(fmt[i + 1]))
return -EINVAL;
fmt_cnt++;
- if (fmt[i - 1] == 's') {
+ if (fmt[i] == 's') {
if (str_seen)
/* allow only one '%s' per fmt string */
return -EINVAL;
--
2.19.1




2018-12-14 12:08:06

by Greg Kroah-Hartman

[permalink] [raw]
Subject: [PATCH 4.19 088/142] USB: omap_udc: fix USB gadget functionality on Palm Tungsten E

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit 2c2322fbcab8102b8cadc09d66714700a2da42c2 ]

On Palm TE nothing happens when you try to use gadget drivers and plug
the USB cable. Fix by adding the board to the vbus sense quirk list.

Signed-off-by: Aaro Koskinen <[email protected]>
Signed-off-by: Felipe Balbi <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/usb/gadget/udc/omap_udc.c | 1 +
1 file changed, 1 insertion(+)

diff --git a/drivers/usb/gadget/udc/omap_udc.c b/drivers/usb/gadget/udc/omap_udc.c
index 33250e569af8..9b23e04c8f02 100644
--- a/drivers/usb/gadget/udc/omap_udc.c
+++ b/drivers/usb/gadget/udc/omap_udc.c
@@ -2033,6 +2033,7 @@ static inline int machine_without_vbus_sense(void)
{
return machine_is_omap_innovator()
|| machine_is_omap_osk()
+ || machine_is_omap_palmte()
|| machine_is_sx1()
/* No known omap7xx boards with vbus sense */
|| cpu_is_omap7xx();
--
2.19.1




2018-12-14 12:08:07

by Greg Kroah-Hartman

[permalink] [raw]
Subject: [PATCH 4.19 130/142] kernel/kcov.c: mark funcs in __sanitizer_cov_trace_pc() as notrace

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit 903e8ff86753e6f327bb92166a0665e4ecb8e2e7 ]

Since __sanitizer_cov_trace_pc() is marked as notrace, function calls in
__sanitizer_cov_trace_pc() shouldn't be traced either.
ftrace_graph_caller() gets called for each function that isn't marked
'notrace', like canonicalize_ip(). This is the call trace from a run:

[ 139.644550] ftrace_graph_caller+0x1c/0x24
[ 139.648352] canonicalize_ip+0x18/0x28
[ 139.652313] __sanitizer_cov_trace_pc+0x14/0x58
[ 139.656184] sched_clock+0x34/0x1e8
[ 139.659759] trace_clock_local+0x40/0x88
[ 139.663722] ftrace_push_return_trace+0x8c/0x1f0
[ 139.667767] prepare_ftrace_return+0xa8/0x100
[ 139.671709] ftrace_graph_caller+0x1c/0x24

Rework so that check_kcov_mode() and canonicalize_ip() that are called
from __sanitizer_cov_trace_pc() are also marked as notrace.

Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnd Bergmann <[email protected]>
Signen-off-by: Anders Roxell <[email protected]>
Co-developed-by: Arnd Bergmann <[email protected]>
Acked-by: Steven Rostedt (VMware) <[email protected]>
Cc: Dmitry Vyukov <[email protected]>
Cc: Ingo Molnar <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
kernel/kcov.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/kernel/kcov.c b/kernel/kcov.c
index 3ebd09efe72a..97959d7b77e2 100644
--- a/kernel/kcov.c
+++ b/kernel/kcov.c
@@ -56,7 +56,7 @@ struct kcov {
struct task_struct *t;
};

-static bool check_kcov_mode(enum kcov_mode needed_mode, struct task_struct *t)
+static notrace bool check_kcov_mode(enum kcov_mode needed_mode, struct task_struct *t)
{
unsigned int mode;

@@ -78,7 +78,7 @@ static bool check_kcov_mode(enum kcov_mode needed_mode, struct task_struct *t)
return mode == needed_mode;
}

-static unsigned long canonicalize_ip(unsigned long ip)
+static notrace unsigned long canonicalize_ip(unsigned long ip)
{
#ifdef CONFIG_RANDOMIZE_BASE
ip -= kaslr_offset();
--
2.19.1




2018-12-14 12:08:13

by Greg Kroah-Hartman

[permalink] [raw]
Subject: [PATCH 4.19 067/142] phy: qcom-qusb2: Use HSTX_TRIM fused value as is

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit 6e34d358b24ffc40764eb3681164c79091765429 ]

Fix HSTX_TRIM tuning logic which instead of using fused value
as HSTX_TRIM, incorrectly performs bitwise OR operation with
existing default value.

Fixes: ca04d9d3e1b1 ("phy: qcom-qusb2: New driver for QUSB2 PHY on Qcom chips")
Signed-off-by: Manu Gautam <[email protected]>
Reviewed-by: Douglas Anderson <[email protected]>
Reviewed-by: Stephen Boyd <[email protected]>
Acked-by: Vivek Gautam <[email protected]>
Signed-off-by: Kishon Vijay Abraham I <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/phy/qualcomm/phy-qcom-qusb2.c | 19 ++++++++++---------
1 file changed, 10 insertions(+), 9 deletions(-)

diff --git a/drivers/phy/qualcomm/phy-qcom-qusb2.c b/drivers/phy/qualcomm/phy-qcom-qusb2.c
index e70e425f26f5..9d6c88064158 100644
--- a/drivers/phy/qualcomm/phy-qcom-qusb2.c
+++ b/drivers/phy/qualcomm/phy-qcom-qusb2.c
@@ -402,10 +402,10 @@ static void qusb2_phy_set_tune2_param(struct qusb2_phy *qphy)

/*
* Read efuse register having TUNE2/1 parameter's high nibble.
- * If efuse register shows value as 0x0, or if we fail to find
- * a valid efuse register settings, then use default value
- * as 0xB for high nibble that we have already set while
- * configuring phy.
+ * If efuse register shows value as 0x0 (indicating value is not
+ * fused), or if we fail to find a valid efuse register setting,
+ * then use default value for high nibble that we have already
+ * set while configuring the phy.
*/
val = nvmem_cell_read(qphy->cell, NULL);
if (IS_ERR(val) || !val[0]) {
@@ -415,12 +415,13 @@ static void qusb2_phy_set_tune2_param(struct qusb2_phy *qphy)

/* Fused TUNE1/2 value is the higher nibble only */
if (cfg->update_tune1_with_efuse)
- qusb2_setbits(qphy->base, cfg->regs[QUSB2PHY_PORT_TUNE1],
- val[0] << 0x4);
+ qusb2_write_mask(qphy->base, cfg->regs[QUSB2PHY_PORT_TUNE1],
+ val[0] << HSTX_TRIM_SHIFT,
+ HSTX_TRIM_MASK);
else
- qusb2_setbits(qphy->base, cfg->regs[QUSB2PHY_PORT_TUNE2],
- val[0] << 0x4);
-
+ qusb2_write_mask(qphy->base, cfg->regs[QUSB2PHY_PORT_TUNE2],
+ val[0] << HSTX_TRIM_SHIFT,
+ HSTX_TRIM_MASK);
}

static int qusb2_phy_set_mode(struct phy *phy, enum phy_mode mode)
--
2.19.1




2018-12-14 12:08:31

by Greg Kroah-Hartman

[permalink] [raw]
Subject: [PATCH 4.19 136/142] ALSA: hda/realtek - Fixed headphone issue for ALC700

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

From: Kailang Yang <[email protected]>

commit bde1a7459623a66c2abec4d0a841e4b06cc88d9a upstream.

If it plugged headphone or headset into the jack, then
do the reboot, it will have a chance to cause headphone no sound.
It just need to run the headphone mode procedure after boot time.
The issue will be fixed.
It also suitable for ALC234 ALC274 and ALC294.

Signed-off-by: Kailang Yang <[email protected]>
Cc: <[email protected]>
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>

---
sound/pci/hda/patch_realtek.c | 33 +++++++++++++++++++++++++++++++++
1 file changed, 33 insertions(+)

--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -7227,6 +7227,37 @@ static void alc269_fill_coef(struct hda_
alc_update_coef_idx(codec, 0x4, 0, 1<<11);
}

+static void alc294_hp_init(struct hda_codec *codec)
+{
+ struct alc_spec *spec = codec->spec;
+ hda_nid_t hp_pin = spec->gen.autocfg.hp_pins[0];
+ int i, val;
+
+ if (!hp_pin)
+ return;
+
+ snd_hda_codec_write(codec, hp_pin, 0,
+ AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE);
+
+ msleep(100);
+
+ snd_hda_codec_write(codec, hp_pin, 0,
+ AC_VERB_SET_PIN_WIDGET_CONTROL, 0x0);
+
+ alc_update_coef_idx(codec, 0x6f, 0x000f, 0);/* Set HP depop to manual mode */
+ alc_update_coefex_idx(codec, 0x58, 0x00, 0x8000, 0x8000); /* HP depop procedure start */
+
+ /* Wait for depop procedure finish */
+ val = alc_read_coefex_idx(codec, 0x58, 0x01);
+ for (i = 0; i < 20 && val & 0x0080; i++) {
+ msleep(50);
+ val = alc_read_coefex_idx(codec, 0x58, 0x01);
+ }
+ /* Set HP depop to auto mode */
+ alc_update_coef_idx(codec, 0x6f, 0x000f, 0x000b);
+ msleep(50);
+}
+
/*
*/
static int patch_alc269(struct hda_codec *codec)
@@ -7352,6 +7383,7 @@ static int patch_alc269(struct hda_codec
spec->codec_variant = ALC269_TYPE_ALC294;
spec->gen.mixer_nid = 0; /* ALC2x4 does not have any loopback mixer path */
alc_update_coef_idx(codec, 0x6b, 0x0018, (1<<4) | (1<<3)); /* UAJ MIC Vref control by verb */
+ alc294_hp_init(codec);
break;
case 0x10ec0300:
spec->codec_variant = ALC269_TYPE_ALC300;
@@ -7363,6 +7395,7 @@ static int patch_alc269(struct hda_codec
spec->codec_variant = ALC269_TYPE_ALC700;
spec->gen.mixer_nid = 0; /* ALC700 does not have any loopback mixer path */
alc_update_coef_idx(codec, 0x4a, 1 << 15, 0); /* Combo jack auto trigger control */
+ alc294_hp_init(codec);
break;

}



2018-12-14 12:08:39

by Greg Kroah-Hartman

[permalink] [raw]
Subject: [PATCH 4.19 073/142] RDMA/bnxt_re: Fix system hang when registration with L2 driver fails

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit 3c4b1419c33c2417836a63f8126834ee36968321 ]

Driver doesn't release rtnl lock if registration with
L2 driver (bnxt_re_register_netdev) fais and this causes
hang while requesting for the next lock.

[ 371.635416] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 371.635417] kworker/u48:1 D 0 634 2 0x80000000
[ 371.635423] Workqueue: bnxt_re bnxt_re_task [bnxt_re]
[ 371.635424] Call Trace:
[ 371.635426] ? __schedule+0x36b/0xbd0
[ 371.635429] schedule+0x39/0x90
[ 371.635430] schedule_preempt_disabled+0x11/0x20
[ 371.635431] __mutex_lock+0x45b/0x9c0
[ 371.635433] ? __mutex_lock+0x16d/0x9c0
[ 371.635435] ? bnxt_re_ib_reg+0x2b/0xb30 [bnxt_re]
[ 371.635438] ? wake_up_klogd+0x37/0x40
[ 371.635442] bnxt_re_ib_reg+0x2b/0xb30 [bnxt_re]
[ 371.635447] bnxt_re_task+0xfd/0x180 [bnxt_re]
[ 371.635449] process_one_work+0x216/0x5b0
[ 371.635450] ? process_one_work+0x189/0x5b0
[ 371.635453] worker_thread+0x4e/0x3d0
[ 371.635455] kthread+0x10e/0x140
[ 371.635456] ? process_one_work+0x5b0/0x5b0
[ 371.635458] ? kthread_stop+0x220/0x220
[ 371.635460] ret_from_fork+0x3a/0x50
[ 371.635477] INFO: task NetworkManager:1228 blocked for more than 120 seconds.
[ 371.635478] Tainted: G B OE 4.20.0-rc1+ #42
[ 371.635479] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.

Release the rtnl_lock correctly in the failure path.

Fixes: de5c95d0f518 ("RDMA/bnxt_re: Fix system crash during RDMA resource initialization")
Signed-off-by: Selvin Xavier <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/infiniband/hw/bnxt_re/main.c | 1 +
1 file changed, 1 insertion(+)

diff --git a/drivers/infiniband/hw/bnxt_re/main.c b/drivers/infiniband/hw/bnxt_re/main.c
index 85cd1a3593d6..bb3f16273938 100644
--- a/drivers/infiniband/hw/bnxt_re/main.c
+++ b/drivers/infiniband/hw/bnxt_re/main.c
@@ -1252,6 +1252,7 @@ static int bnxt_re_ib_reg(struct bnxt_re_dev *rdev)
/* Registered a new RoCE device instance to netdev */
rc = bnxt_re_register_netdev(rdev);
if (rc) {
+ rtnl_unlock();
pr_err("Failed to register with netedev: %#x\n", rc);
return -EINVAL;
}
--
2.19.1




2018-12-14 12:08:46

by Greg Kroah-Hartman

[permalink] [raw]
Subject: [PATCH 4.19 111/142] drm/ast: fixed reading monitor EDID not stable issue

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit 300625620314194d9e6d4f6dda71f2dc9cf62d9f ]

v1: over-sample data to increase the stability with some specific monitors
v2: refine to avoid infinite loop
v3: remove un-necessary "volatile" declaration

[airlied: fix two checkpatch warnings]

Signed-off-by: Y.C. Chen <[email protected]>
Signed-off-by: Dave Airlie <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/ast/ast_mode.c | 36 ++++++++++++++++++++++++++++------
1 file changed, 30 insertions(+), 6 deletions(-)

diff --git a/drivers/gpu/drm/ast/ast_mode.c b/drivers/gpu/drm/ast/ast_mode.c
index 7c6ac3cadb6b..8bb355d5d43d 100644
--- a/drivers/gpu/drm/ast/ast_mode.c
+++ b/drivers/gpu/drm/ast/ast_mode.c
@@ -973,9 +973,21 @@ static int get_clock(void *i2c_priv)
{
struct ast_i2c_chan *i2c = i2c_priv;
struct ast_private *ast = i2c->dev->dev_private;
- uint32_t val;
+ uint32_t val, val2, count, pass;
+
+ count = 0;
+ pass = 0;
+ val = (ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xb7, 0x10) >> 4) & 0x01;
+ do {
+ val2 = (ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xb7, 0x10) >> 4) & 0x01;
+ if (val == val2) {
+ pass++;
+ } else {
+ pass = 0;
+ val = (ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xb7, 0x10) >> 4) & 0x01;
+ }
+ } while ((pass < 5) && (count++ < 0x10000));

- val = ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xb7, 0x10) >> 4;
return val & 1 ? 1 : 0;
}

@@ -983,9 +995,21 @@ static int get_data(void *i2c_priv)
{
struct ast_i2c_chan *i2c = i2c_priv;
struct ast_private *ast = i2c->dev->dev_private;
- uint32_t val;
+ uint32_t val, val2, count, pass;
+
+ count = 0;
+ pass = 0;
+ val = (ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xb7, 0x20) >> 5) & 0x01;
+ do {
+ val2 = (ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xb7, 0x20) >> 5) & 0x01;
+ if (val == val2) {
+ pass++;
+ } else {
+ pass = 0;
+ val = (ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xb7, 0x20) >> 5) & 0x01;
+ }
+ } while ((pass < 5) && (count++ < 0x10000));

- val = ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xb7, 0x20) >> 5;
return val & 1 ? 1 : 0;
}

@@ -998,7 +1022,7 @@ static void set_clock(void *i2c_priv, int clock)

for (i = 0; i < 0x10000; i++) {
ujcrb7 = ((clock & 0x01) ? 0 : 1);
- ast_set_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xb7, 0xfe, ujcrb7);
+ ast_set_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xb7, 0xf4, ujcrb7);
jtemp = ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xb7, 0x01);
if (ujcrb7 == jtemp)
break;
@@ -1014,7 +1038,7 @@ static void set_data(void *i2c_priv, int data)

for (i = 0; i < 0x10000; i++) {
ujcrb7 = ((data & 0x01) ? 0 : 1) << 2;
- ast_set_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xb7, 0xfb, ujcrb7);
+ ast_set_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xb7, 0xf1, ujcrb7);
jtemp = ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xb7, 0x04);
if (ujcrb7 == jtemp)
break;
--
2.19.1




2018-12-14 12:08:48

by Greg Kroah-Hartman

[permalink] [raw]
Subject: [PATCH 4.19 076/142] tools: bpftool: fix potential NULL pointer dereference in do_load

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit dde7011a824cfa815b03f853ec985ff46b740939 ]

This patch fixes a possible null pointer dereference in
do_load, detected by the semantic patch deref_null.cocci,
with the following warning:

./tools/bpf/bpftool/prog.c:1021:23-25: ERROR: map_replace is NULL but dereferenced.

The following code has potential null pointer references:
881 map_replace = reallocarray(map_replace, old_map_fds + 1,
882 sizeof(*map_replace));
883 if (!map_replace) {
884 p_err("mem alloc failed");
885 goto err_free_reuse_maps;
886 }

...
1019 err_free_reuse_maps:
1020 for (i = 0; i < old_map_fds; i++)
1021 close(map_replace[i].fd);
1022 free(map_replace);

Fixes: 3ff5a4dc5d89 ("tools: bpftool: allow reuse of maps with bpftool prog load")
Co-developed-by: Wen Yang <[email protected]>
Signed-off-by: Wen Yang <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
tools/bpf/bpftool/prog.c | 10 +++++++---
1 file changed, 7 insertions(+), 3 deletions(-)

diff --git a/tools/bpf/bpftool/prog.c b/tools/bpf/bpftool/prog.c
index dce960d22106..0de024a6cc2b 100644
--- a/tools/bpf/bpftool/prog.c
+++ b/tools/bpf/bpftool/prog.c
@@ -749,6 +749,7 @@ static int do_load(int argc, char **argv)
}
NEXT_ARG();
} else if (is_prefix(*argv, "map")) {
+ void *new_map_replace;
char *endptr, *name;
int fd;

@@ -782,12 +783,15 @@ static int do_load(int argc, char **argv)
if (fd < 0)
goto err_free_reuse_maps;

- map_replace = reallocarray(map_replace, old_map_fds + 1,
- sizeof(*map_replace));
- if (!map_replace) {
+ new_map_replace = reallocarray(map_replace,
+ old_map_fds + 1,
+ sizeof(*map_replace));
+ if (!new_map_replace) {
p_err("mem alloc failed");
goto err_free_reuse_maps;
}
+ map_replace = new_map_replace;
+
map_replace[old_map_fds].idx = idx;
map_replace[old_map_fds].name = name;
map_replace[old_map_fds].fd = fd;
--
2.19.1




2018-12-14 12:08:59

by Greg Kroah-Hartman

[permalink] [raw]
Subject: [PATCH 4.19 112/142] xen: xlate_mmu: add missing header to fix W=1 warning

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit 72791ac854fea36034fa7976b748fde585008e78 ]

Add a missing header otherwise compiler warns about missed prototype:

drivers/xen/xlate_mmu.c:183:5: warning: no previous prototype for 'xen_xlate_unmap_gfn_range?' [-Wmissing-prototypes]
int xen_xlate_unmap_gfn_range(struct vm_area_struct *vma,
^~~~~~~~~~~~~~~~~~~~~~~~~

Signed-off-by: Srikanth Boddepalli <[email protected]>
Reviewed-by: Boris Ostrovsky <[email protected]>
Reviewed-by: Joey Pabalinas <[email protected]>
Signed-off-by: Juergen Gross <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/xen/xlate_mmu.c | 1 +
1 file changed, 1 insertion(+)

diff --git a/drivers/xen/xlate_mmu.c b/drivers/xen/xlate_mmu.c
index 23f1387b3ef7..e7df65d32c91 100644
--- a/drivers/xen/xlate_mmu.c
+++ b/drivers/xen/xlate_mmu.c
@@ -36,6 +36,7 @@
#include <asm/xen/hypervisor.h>

#include <xen/xen.h>
+#include <xen/xen-ops.h>
#include <xen/page.h>
#include <xen/interface/xen.h>
#include <xen/interface/memory.h>
--
2.19.1




2018-12-14 12:09:06

by Greg Kroah-Hartman

[permalink] [raw]
Subject: [PATCH 4.19 103/142] ALSA: usb-audio: Add vendor and product name for Dell WD19 Dock

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit 8159a6a4a7d2a092d5375f695ecfca22b4562b5f ]

Like the Dell WD15 Dock, the WD19 Dock (0bda:402e) doens't provide
useful string for the vendor and product names too. In order to share
the UCM with WD15, here we keep the profile_name same as the WD15.

Signed-off-by: Hui Wang <[email protected]>
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/usb/quirks-table.h | 10 ++++++++++
1 file changed, 10 insertions(+)

diff --git a/sound/usb/quirks-table.h b/sound/usb/quirks-table.h
index 08aa78007020..1c73b9ed44a6 100644
--- a/sound/usb/quirks-table.h
+++ b/sound/usb/quirks-table.h
@@ -3387,5 +3387,15 @@ AU0828_DEVICE(0x2040, 0x7270, "Hauppauge", "HVR-950Q"),
.ifnum = QUIRK_NO_INTERFACE
}
},
+/* Dell WD19 Dock */
+{
+ USB_DEVICE(0x0bda, 0x402e),
+ .driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) {
+ .vendor_name = "Dell",
+ .product_name = "WD19 Dock",
+ .profile_name = "Dell-WD15-Dock",
+ .ifnum = QUIRK_NO_INTERFACE
+ }
+},

#undef USB_DEVICE_VENDOR_SPEC
--
2.19.1




2018-12-14 12:09:19

by Greg Kroah-Hartman

[permalink] [raw]
Subject: [PATCH 4.19 142/142] bpf: fix off-by-one error in adjust_subprog_starts

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

From: Edward Cree <[email protected]>

commit afd594240806acc138cf696c09f2f4829d55d02f upstream.

When patching in a new sequence for the first insn of a subprog, the start
of that subprog does not change (it's the first insn of the sequence), so
adjust_subprog_starts should check start <= off (rather than < off).
Also added a test to test_verifier.c (it's essentially the syz reproducer).

Fixes: cc8b0b92a169 ("bpf: introduce function calls (function boundaries)")
Reported-by: [email protected]
Signed-off-by: Edward Cree <[email protected]>
Acked-by: Yonghong Song <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>

---
kernel/bpf/verifier.c | 2 +-
tools/testing/selftests/bpf/test_verifier.c | 19 +++++++++++++++++++
2 files changed, 20 insertions(+), 1 deletion(-)

--- a/kernel/bpf/verifier.c
+++ b/kernel/bpf/verifier.c
@@ -5283,7 +5283,7 @@ static void adjust_subprog_starts(struct
return;
/* NOTE: fake 'exit' subprog should be updated as well. */
for (i = 0; i <= env->subprog_cnt; i++) {
- if (env->subprog_info[i].start < off)
+ if (env->subprog_info[i].start <= off)
continue;
env->subprog_info[i].start += len - 1;
}
--- a/tools/testing/selftests/bpf/test_verifier.c
+++ b/tools/testing/selftests/bpf/test_verifier.c
@@ -12511,6 +12511,25 @@ static struct bpf_test tests[] = {
.prog_type = BPF_PROG_TYPE_SCHED_CLS,
.result = ACCEPT,
},
+ {
+ "calls: ctx read at start of subprog",
+ .insns = {
+ BPF_MOV64_REG(BPF_REG_6, BPF_REG_1),
+ BPF_RAW_INSN(BPF_JMP | BPF_CALL, 0, 1, 0, 5),
+ BPF_JMP_REG(BPF_JSGT, BPF_REG_0, BPF_REG_0, 0),
+ BPF_MOV64_REG(BPF_REG_1, BPF_REG_6),
+ BPF_RAW_INSN(BPF_JMP | BPF_CALL, 0, 1, 0, 2),
+ BPF_MOV64_REG(BPF_REG_1, BPF_REG_0),
+ BPF_EXIT_INSN(),
+ BPF_LDX_MEM(BPF_B, BPF_REG_9, BPF_REG_1, 0),
+ BPF_MOV64_IMM(BPF_REG_0, 0),
+ BPF_EXIT_INSN(),
+ },
+ .prog_type = BPF_PROG_TYPE_SOCKET_FILTER,
+ .errstr_unpriv = "function calls to other bpf functions are allowed for root only",
+ .result_unpriv = REJECT,
+ .result = ACCEPT,
+ },
};

static int probe_filter_length(const struct bpf_insn *fp)



2018-12-14 12:09:23

by Greg Kroah-Hartman

[permalink] [raw]
Subject: [PATCH 4.19 116/142] afs: Fix validation/callback interaction

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit ae3b7361dc0ee9a425bf7d77ce211f533500b39b ]

When afs_validate() is called to validate a vnode (inode), there are two
unhandled cases in the fastpath at the top of the function:

(1) If the vnode is promised (AFS_VNODE_CB_PROMISED is set), the break
counters match and the data has expired, then there's an implicit case
in which the vnode needs revalidating.

This has no consequences since the default "valid = false" set at the
top of the function happens to do the right thing.

(2) If the vnode is not promised and it hasn't been deleted
(AFS_VNODE_DELETED is not set) then there's a default case we're not
handling in which the vnode is invalid. If the vnode is invalid, we
need to bring cb_s_break and cb_v_break up to date before we refetch
the status.

As a consequence, once the server loses track of the client
(ie. sufficient time has passed since we last sent it an operation),
it will send us a CB.InitCallBackState* operation when we next try to
talk to it. This calls afs_init_callback_state() which increments
afs_server::cb_s_break, but this then doesn't propagate to the
afs_vnode record.

The result being that every afs_validate() call thereafter sends a
status fetch operation to the server.

Clarify and fix this by:

(A) Setting valid in all the branches rather than initialising it at the
top so that the compiler catches where we've missed.

(B) Restructuring the logic in the 'promised' branch so that we set valid
to false if the callback is due to expire (or has expired) and so that
the final case is that the vnode is still valid.

(C) Adding an else-statement that ups cb_s_break and cb_v_break if the
promised and deleted cases don't match.

Fixes: c435ee34551e ("afs: Overhaul the callback handling")
Signed-off-by: David Howells <[email protected]>
Signed-off-by: Al Viro <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/afs/inode.c | 18 ++++++++++++------
1 file changed, 12 insertions(+), 6 deletions(-)

diff --git a/fs/afs/inode.c b/fs/afs/inode.c
index 479b7fdda124..071075d775a9 100644
--- a/fs/afs/inode.c
+++ b/fs/afs/inode.c
@@ -379,7 +379,7 @@ void afs_zap_data(struct afs_vnode *vnode)
int afs_validate(struct afs_vnode *vnode, struct key *key)
{
time64_t now = ktime_get_real_seconds();
- bool valid = false;
+ bool valid;
int ret;

_enter("{v={%x:%u} fl=%lx},%x",
@@ -399,15 +399,21 @@ int afs_validate(struct afs_vnode *vnode, struct key *key)
vnode->cb_v_break = vnode->volume->cb_v_break;
valid = false;
} else if (vnode->status.type == AFS_FTYPE_DIR &&
- test_bit(AFS_VNODE_DIR_VALID, &vnode->flags) &&
- vnode->cb_expires_at - 10 > now) {
- valid = true;
- } else if (!test_bit(AFS_VNODE_ZAP_DATA, &vnode->flags) &&
- vnode->cb_expires_at - 10 > now) {
+ (!test_bit(AFS_VNODE_DIR_VALID, &vnode->flags) ||
+ vnode->cb_expires_at - 10 <= now)) {
+ valid = false;
+ } else if (test_bit(AFS_VNODE_ZAP_DATA, &vnode->flags) ||
+ vnode->cb_expires_at - 10 <= now) {
+ valid = false;
+ } else {
valid = true;
}
} else if (test_bit(AFS_VNODE_DELETED, &vnode->flags)) {
valid = true;
+ } else {
+ vnode->cb_s_break = vnode->cb_interest->server->cb_s_break;
+ vnode->cb_v_break = vnode->volume->cb_v_break;
+ valid = false;
}

read_sequnlock_excl(&vnode->cb_lock);
--
2.19.1




2018-12-14 12:09:25

by Greg Kroah-Hartman

[permalink] [raw]
Subject: [PATCH 4.19 118/142] cachefiles: Explicitly cast enumerated type in put_object

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit b7e768b7e3522695ed36dcb48ecdcd344bd30a9b ]

Clang warns when one enumerated type is implicitly converted to another.

fs/cachefiles/namei.c:247:50: warning: implicit conversion from
enumeration type 'enum cachefiles_obj_ref_trace' to different
enumeration type 'enum fscache_obj_ref_trace' [-Wenum-conversion]
cache->cache.ops->put_object(&xobject->fscache,
cachefiles_obj_put_wait_retry);

Silence this warning by explicitly casting to fscache_obj_ref_trace,
which is also done in put_object.

Reported-by: Nick Desaulniers <[email protected]>
Signed-off-by: Nathan Chancellor <[email protected]>
Signed-off-by: David Howells <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/cachefiles/namei.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/fs/cachefiles/namei.c b/fs/cachefiles/namei.c
index 95983c744164..5ab411d4bc59 100644
--- a/fs/cachefiles/namei.c
+++ b/fs/cachefiles/namei.c
@@ -244,11 +244,13 @@ static int cachefiles_mark_object_active(struct cachefiles_cache *cache,

ASSERT(!test_bit(CACHEFILES_OBJECT_ACTIVE, &xobject->flags));

- cache->cache.ops->put_object(&xobject->fscache, cachefiles_obj_put_wait_retry);
+ cache->cache.ops->put_object(&xobject->fscache,
+ (enum fscache_obj_ref_trace)cachefiles_obj_put_wait_retry);
goto try_again;

requeue:
- cache->cache.ops->put_object(&xobject->fscache, cachefiles_obj_put_wait_timeo);
+ cache->cache.ops->put_object(&xobject->fscache,
+ (enum fscache_obj_ref_trace)cachefiles_obj_put_wait_timeo);
_leave(" = -ETIMEDOUT");
return -ETIMEDOUT;
}
--
2.19.1




2018-12-14 12:09:26

by Greg Kroah-Hartman

[permalink] [raw]
Subject: [PATCH 4.19 127/142] hfsplus: do not free node before using

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit c7d7d620dcbd2a1c595092280ca943f2fced7bbd ]

hfs_bmap_free() frees node via hfs_bnode_put(node). However it then
reads node->this when dumping error message on an error path, which may
result in a use-after-free bug. This patch frees node only when it is
never used.

Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Pan Bian <[email protected]>
Reviewed-by: Andrew Morton <[email protected]>
Cc: Ernesto A. Fernandez <[email protected]>
Cc: Joe Perches <[email protected]>
Cc: Viacheslav Dubeyko <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/hfsplus/btree.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/fs/hfsplus/btree.c b/fs/hfsplus/btree.c
index de14b2b6881b..3de3bc4918b5 100644
--- a/fs/hfsplus/btree.c
+++ b/fs/hfsplus/btree.c
@@ -454,14 +454,15 @@ void hfs_bmap_free(struct hfs_bnode *node)

nidx -= len * 8;
i = node->next;
- hfs_bnode_put(node);
if (!i) {
/* panic */;
pr_crit("unable to free bnode %u. "
"bmap not found!\n",
node->this);
+ hfs_bnode_put(node);
return;
}
+ hfs_bnode_put(node);
node = hfs_bnode_find(tree, i);
if (IS_ERR(node))
return;
--
2.19.1




2018-12-14 12:09:32

by Greg Kroah-Hartman

[permalink] [raw]
Subject: [PATCH 4.19 135/142] ALSA: fireface: fix reference to wrong register for clock configuration

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

From: Takashi Sakamoto <[email protected]>

commit fa9c98e4b975bb3192ed6af09d9fa282ed3cd8a0 upstream.

In an initial commit, 'SYNC_STATUS' register is referred to get
clock configuration, however this is wrong, according to my local
note at hand for reverse-engineering about packet dump. It should
be 'CLOCK_CONFIG' register. Actually, ff400_dump_clock_config()
is correctly programmed.

This commit fixes the bug.

Cc: <[email protected]> # v4.12+
Fixes: 76fdb3a9e13a ('ALSA: fireface: add support for Fireface 400')
Signed-off-by: Takashi Sakamoto <[email protected]>
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>

---
sound/firewire/fireface/ff-protocol-ff400.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

--- a/sound/firewire/fireface/ff-protocol-ff400.c
+++ b/sound/firewire/fireface/ff-protocol-ff400.c
@@ -30,7 +30,7 @@ static int ff400_get_clock(struct snd_ff
int err;

err = snd_fw_transaction(ff->unit, TCODE_READ_QUADLET_REQUEST,
- FF400_SYNC_STATUS, &reg, sizeof(reg), 0);
+ FF400_CLOCK_CONFIG, &reg, sizeof(reg), 0);
if (err < 0)
return err;
data = le32_to_cpu(reg);



2018-12-14 12:09:41

by Greg Kroah-Hartman

[permalink] [raw]
Subject: [PATCH 4.19 101/142] usb: gadget: u_ether: fix unsafe list iteration

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit c9287fa657b3328b4549c0ab39ea7f197a3d6a50 ]

list_for_each_entry_safe() is not safe for deleting entries from the
list if the spin lock, which protects it, is released and reacquired during
the list iteration. Fix this issue by replacing this construction with
a simple check if list is empty and removing the first entry in each
iteration. This is almost equivalent to a revert of the commit mentioned in
the Fixes: tag.

This patch fixes following issue:
--->8---
Unable to handle kernel NULL pointer dereference at virtual address 00000104
pgd = (ptrval)
[00000104] *pgd=00000000
Internal error: Oops: 817 [#1] PREEMPT SMP ARM
Modules linked in:
CPU: 1 PID: 84 Comm: kworker/1:1 Not tainted 4.20.0-rc2-next-20181114-00009-g8266b35ec404 #1061
Hardware name: SAMSUNG EXYNOS (Flattened Device Tree)
Workqueue: events eth_work
PC is at rx_fill+0x60/0xac
LR is at _raw_spin_lock_irqsave+0x50/0x5c
pc : [<c065fee0>] lr : [<c0a056b8>] psr: 80000093
sp : ee7fbee8 ip : 00000100 fp : 00000000
r10: 006000c0 r9 : c10b0ab0 r8 : ee7eb5c0
r7 : ee7eb614 r6 : ee7eb5ec r5 : 000000dc r4 : ee12ac00
r3 : ee12ac24 r2 : 00000200 r1 : 60000013 r0 : ee7eb5ec
Flags: Nzcv IRQs off FIQs on Mode SVC_32 ISA ARM Segment none
Control: 10c5387d Table: 6d5dc04a DAC: 00000051
Process kworker/1:1 (pid: 84, stack limit = 0x(ptrval))
Stack: (0xee7fbee8 to 0xee7fc000)
...
[<c065fee0>] (rx_fill) from [<c0143b7c>] (process_one_work+0x200/0x738)
[<c0143b7c>] (process_one_work) from [<c0144118>] (worker_thread+0x2c/0x4c8)
[<c0144118>] (worker_thread) from [<c014a8a4>] (kthread+0x128/0x164)
[<c014a8a4>] (kthread) from [<c01010b4>] (ret_from_fork+0x14/0x20)
Exception stack(0xee7fbfb0 to 0xee7fbff8)
...
---[ end trace 64480bc835eba7d6 ]---

Fixes: fea14e68ff5e ("usb: gadget: u_ether: use better list accessors")
Signed-off-by: Marek Szyprowski <[email protected]>
Signed-off-by: Felipe Balbi <[email protected]>

Signed-off-by: Sasha Levin <[email protected]>
---
drivers/usb/gadget/function/u_ether.c | 11 ++++++-----
1 file changed, 6 insertions(+), 5 deletions(-)

diff --git a/drivers/usb/gadget/function/u_ether.c b/drivers/usb/gadget/function/u_ether.c
index 1000d864929c..0f026d445e31 100644
--- a/drivers/usb/gadget/function/u_ether.c
+++ b/drivers/usb/gadget/function/u_ether.c
@@ -401,12 +401,12 @@ static int alloc_requests(struct eth_dev *dev, struct gether *link, unsigned n)
static void rx_fill(struct eth_dev *dev, gfp_t gfp_flags)
{
struct usb_request *req;
- struct usb_request *tmp;
unsigned long flags;

/* fill unused rxq slots with some skb */
spin_lock_irqsave(&dev->req_lock, flags);
- list_for_each_entry_safe(req, tmp, &dev->rx_reqs, list) {
+ while (!list_empty(&dev->rx_reqs)) {
+ req = list_first_entry(&dev->rx_reqs, struct usb_request, list);
list_del_init(&req->list);
spin_unlock_irqrestore(&dev->req_lock, flags);

@@ -1125,7 +1125,6 @@ void gether_disconnect(struct gether *link)
{
struct eth_dev *dev = link->ioport;
struct usb_request *req;
- struct usb_request *tmp;

WARN_ON(!dev);
if (!dev)
@@ -1142,7 +1141,8 @@ void gether_disconnect(struct gether *link)
*/
usb_ep_disable(link->in_ep);
spin_lock(&dev->req_lock);
- list_for_each_entry_safe(req, tmp, &dev->tx_reqs, list) {
+ while (!list_empty(&dev->tx_reqs)) {
+ req = list_first_entry(&dev->tx_reqs, struct usb_request, list);
list_del(&req->list);

spin_unlock(&dev->req_lock);
@@ -1154,7 +1154,8 @@ void gether_disconnect(struct gether *link)

usb_ep_disable(link->out_ep);
spin_lock(&dev->req_lock);
- list_for_each_entry_safe(req, tmp, &dev->rx_reqs, list) {
+ while (!list_empty(&dev->rx_reqs)) {
+ req = list_first_entry(&dev->rx_reqs, struct usb_request, list);
list_del(&req->list);

spin_unlock(&dev->req_lock);
--
2.19.1




2018-12-14 12:09:46

by Greg Kroah-Hartman

[permalink] [raw]
Subject: [PATCH 4.19 139/142] ALSA: hda/realtek: Enable audio jacks of ASUS UX433FN/UX333FA with ALC294

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

From: Jian-Hong Pan <[email protected]>

commit 0bea4cc8383519f78f3f74caca7bdebdfb346d3b upstream.

The ASUS UX433FN and UX333FA with ALC294 cannot detect the headset MIC
and output through the internal speaker and the headphone until
ALC294_FIXUP_ASUS_SPK and ALC294_FIXUP_ASUS_HEADSET_MIC quirk applied.

Signed-off-by: Daniel Drake <[email protected]>
Signed-off-by: Jian-Hong Pan <[email protected]>
Cc: <[email protected]>
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>

---
sound/pci/hda/patch_realtek.c | 4 ++++
1 file changed, 4 insertions(+)

--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -7193,6 +7193,10 @@ static const struct snd_hda_pin_quirk al
{0x14, 0x90170110},
{0x1b, 0x90a70130},
{0x21, 0x04211020}),
+ SND_HDA_PIN_QUIRK(0x10ec0294, 0x1043, "ASUS", ALC294_FIXUP_ASUS_SPK,
+ {0x12, 0x90a60130},
+ {0x17, 0x90170110},
+ {0x21, 0x04211020}),
SND_HDA_PIN_QUIRK(0x10ec0295, 0x1028, "Dell", ALC269_FIXUP_DELL1_MIC_NO_PRESENCE,
ALC295_STANDARD_PINS,
{0x17, 0x21014020},



2018-12-14 12:09:46

by Greg Kroah-Hartman

[permalink] [raw]
Subject: [PATCH 4.19 098/142] KVM: x86: fix empty-body warnings

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit 354cb410d87314e2eda344feea84809e4261570a ]

We get the following warnings about empty statements when building
with 'W=1':

arch/x86/kvm/lapic.c:632:53: warning: suggest braces around empty body in an ‘if’ statement [-Wempty-body]
arch/x86/kvm/lapic.c:1907:42: warning: suggest braces around empty body in an ‘if’ statement [-Wempty-body]
arch/x86/kvm/lapic.c:1936:65: warning: suggest braces around empty body in an ‘if’ statement [-Wempty-body]
arch/x86/kvm/lapic.c:1975:44: warning: suggest braces around empty body in an ‘if’ statement [-Wempty-body]

Rework the debug helper macro to get rid of these warnings.

Signed-off-by: Yi Wang <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/x86/kvm/lapic.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/x86/kvm/lapic.c b/arch/x86/kvm/lapic.c
index 2216d21e955d..3692de84c420 100644
--- a/arch/x86/kvm/lapic.c
+++ b/arch/x86/kvm/lapic.c
@@ -55,7 +55,7 @@
#define PRIo64 "o"

/* #define apic_debug(fmt,arg...) printk(KERN_WARNING fmt,##arg) */
-#define apic_debug(fmt, arg...)
+#define apic_debug(fmt, arg...) do {} while (0)

/* 14 is the version for Xeon and Pentium 8.4.8*/
#define APIC_VERSION (0x14UL | ((KVM_APIC_LVT_NUM - 1) << 16))
--
2.19.1




2018-12-14 12:09:47

by Greg Kroah-Hartman

[permalink] [raw]
Subject: [PATCH 4.19 131/142] initramfs: clean old path before creating a hardlink

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit 7c0950d455d6ab610d2990a13120f935b75abf2c ]

sys_link() can fail due to the new path already existing. This case
ofen occurs when we use a concated initrd, for example:

1) prepare a basic rootfs, it contains a regular files rc.local
lizhijian@:~/yocto-tiny-i386-2016-04-22$ cat etc/rc.local
#!/bin/sh
echo "Running /etc/rc.local..."
yocto-tiny-i386-2016-04-22$ find . | sed 's,^\./,,' | cpio -o -H newc | gzip -n -9 >../rootfs.cgz

2) create a extra initrd which also includes a etc/rc.local
lizhijian@:~/lkp-x86_64/etc$ echo "append initrd" >rc.local
lizhijian@:~/lkp/lkp-x86_64/etc$ cat rc.local
append initrd
lizhijian@:~/lkp/lkp-x86_64/etc$ ln rc.local rc.local.hardlink
append initrd
lizhijian@:~/lkp/lkp-x86_64/etc$ stat rc.local rc.local.hardlink
File: 'rc.local'
Size: 14 Blocks: 8 IO Block: 4096 regular file
Device: 801h/2049d Inode: 11296086 Links: 2
Access: (0664/-rw-rw-r--) Uid: ( 1002/lizhijian) Gid: ( 1002/lizhijian)
Access: 2018-11-15 16:08:28.654464815 +0800
Modify: 2018-11-15 16:07:57.514903210 +0800
Change: 2018-11-15 16:08:24.180228872 +0800
Birth: -
File: 'rc.local.hardlink'
Size: 14 Blocks: 8 IO Block: 4096 regular file
Device: 801h/2049d Inode: 11296086 Links: 2
Access: (0664/-rw-rw-r--) Uid: ( 1002/lizhijian) Gid: ( 1002/lizhijian)
Access: 2018-11-15 16:08:28.654464815 +0800
Modify: 2018-11-15 16:07:57.514903210 +0800
Change: 2018-11-15 16:08:24.180228872 +0800
Birth: -

lizhijian@:~/lkp/lkp-x86_64$ find . | sed 's,^\./,,' | cpio -o -H newc | gzip -n -9 >../rc-local.cgz
lizhijian@:~/lkp/lkp-x86_64$ gzip -dc ../rc-local.cgz | cpio -t
.
etc
etc/rc.local.hardlink <<< it will be extracted first at this initrd
etc/rc.local

3) concate 2 initrds and boot
lizhijian@:~/lkp$ cat rootfs.cgz rc-local.cgz >concate-initrd.cgz
lizhijian@:~/lkp$ qemu-system-x86_64 -nographic -enable-kvm -cpu host -smp 1 -m 1024 -kernel ~/lkp/linux/arch/x86/boot/bzImage -append "console=ttyS0 earlyprint=ttyS0 ignore_loglevel" -initrd ./concate-initr.cgz -serial stdio -nodefaults

In this case, sys_link(2) will fail and return -EEXIST, so we can only get
the rc.local at rootfs.cgz instead of rc-local.cgz

[[email protected]: move code to avoid forward declaration]
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Li Zhijian <[email protected]>
Cc: Philip Li <[email protected]>
Cc: Dominik Brodowski <[email protected]>
Cc: Li Zhijian <[email protected]>
Cc: Al Viro <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
init/initramfs.c | 22 ++++++++++++----------
1 file changed, 12 insertions(+), 10 deletions(-)

diff --git a/init/initramfs.c b/init/initramfs.c
index 640557788026..f6f4a1e4cd54 100644
--- a/init/initramfs.c
+++ b/init/initramfs.c
@@ -291,16 +291,6 @@ static int __init do_reset(void)
return 1;
}

-static int __init maybe_link(void)
-{
- if (nlink >= 2) {
- char *old = find_link(major, minor, ino, mode, collected);
- if (old)
- return (ksys_link(old, collected) < 0) ? -1 : 1;
- }
- return 0;
-}
-
static void __init clean_path(char *path, umode_t fmode)
{
struct kstat st;
@@ -313,6 +303,18 @@ static void __init clean_path(char *path, umode_t fmode)
}
}

+static int __init maybe_link(void)
+{
+ if (nlink >= 2) {
+ char *old = find_link(major, minor, ino, mode, collected);
+ if (old) {
+ clean_path(collected, 0);
+ return (ksys_link(old, collected) < 0) ? -1 : 1;
+ }
+ }
+ return 0;
+}
+
static __initdata int wfd;

static int __init do_name(void)
--
2.19.1




2018-12-14 12:09:50

by Greg Kroah-Hartman

[permalink] [raw]
Subject: [PATCH 4.19 133/142] flexfiles: enforce per-mirror stateid only for v4 DSes

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

From: Tigran Mkrtchyan <[email protected]>

commit 320f35b7bf8cccf1997ca3126843535e1b95e9c4 upstream.

Since commit bb21ce0ad227 we always enforce per-mirror stateid.
However, this makes sense only for v4+ servers.

Signed-off-by: Tigran Mkrtchyan <[email protected]>
Signed-off-by: Trond Myklebust <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>

---
fs/nfs/flexfilelayout/flexfilelayout.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)

--- a/fs/nfs/flexfilelayout/flexfilelayout.c
+++ b/fs/nfs/flexfilelayout/flexfilelayout.c
@@ -1733,7 +1733,8 @@ ff_layout_read_pagelist(struct nfs_pgio_
if (fh)
hdr->args.fh = fh;

- if (!nfs4_ff_layout_select_ds_stateid(lseg, idx, &hdr->args.stateid))
+ if (vers == 4 &&
+ !nfs4_ff_layout_select_ds_stateid(lseg, idx, &hdr->args.stateid))
goto out_failed;

/*
@@ -1798,7 +1799,8 @@ ff_layout_write_pagelist(struct nfs_pgio
if (fh)
hdr->args.fh = fh;

- if (!nfs4_ff_layout_select_ds_stateid(lseg, idx, &hdr->args.stateid))
+ if (vers == 4 &&
+ !nfs4_ff_layout_select_ds_stateid(lseg, idx, &hdr->args.stateid))
goto out_failed;

/*



2018-12-14 12:10:01

by Greg Kroah-Hartman

[permalink] [raw]
Subject: [PATCH 4.19 140/142] ALSA: hda/realtek - Fix the mute LED regresion on Lenovo X1 Carbon

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

From: Hui Wang <[email protected]>

commit 6ba189c5c1a4bda70dc1e4826c58b0246068bb8d upstream.

Users reported a mute LED regression on Lenovo X1 Carbon, the root
cause is we applied the fixup of ALC285_FIXUP_LENOVO_HEADPHONE_NOISE
to this machine, then the machine can't apply the fixup of
ALC269_FIXUP_THINKPAD_ACPI anymore. To fix it, we chain two fixup
together.

Fixes: c4cfcf6f4297 ("ALSA: hda/realtek - fix the pop noise on headphone for lenovo laptops")
Cc: <[email protected]>
Signed-off-by: Hui Wang <[email protected]>
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>

---
sound/pci/hda/patch_realtek.c | 2 ++
1 file changed, 2 insertions(+)

--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -6395,6 +6395,8 @@ static const struct hda_fixup alc269_fix
[ALC285_FIXUP_LENOVO_HEADPHONE_NOISE] = {
.type = HDA_FIXUP_FUNC,
.v.func = alc285_fixup_invalidate_dacs,
+ .chained = true,
+ .chain_id = ALC269_FIXUP_THINKPAD_ACPI
},
[ALC295_FIXUP_HP_AUTO_MUTE] = {
.type = HDA_FIXUP_FUNC,



2018-12-14 12:10:16

by Greg Kroah-Hartman

[permalink] [raw]
Subject: [PATCH 4.19 141/142] IB/hfi1: Fix an out-of-bounds access in get_hw_stats

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

From: Piotr Stankiewicz <[email protected]>

commit 36d842194a57f1b21fbc6a6875f2fa2f9a7f8679 upstream.

When running with KASAN, the following trace is produced:

[ 62.535888]

==================================================================
[ 62.544930] BUG: KASAN: slab-out-of-bounds in
gut_hw_stats+0x122/0x230 [hfi1]
[ 62.553856] Write of size 8 at addr ffff88080e8d6330 by task
kworker/0:1/14

[ 62.565333] CPU: 0 PID: 14 Comm: kworker/0:1 Not tainted
4.19.0-test-build-kasan+ #8
[ 62.575087] Hardware name: Intel Corporation S2600KPR/S2600KPR, BIOS
SE5C610.86B.01.01.0019.101220160604 10/12/2016
[ 62.587951] Workqueue: events work_for_cpu_fn
[ 62.594050] Call Trace:
[ 62.598023] dump_stack+0xc6/0x14c
[ 62.603089] ? dump_stack_print_info.cold.1+0x2f/0x2f
[ 62.610041] ? kmsg_dump_rewind_nolock+0x59/0x59
[ 62.616615] ? get_hw_stats+0x122/0x230 [hfi1]
[ 62.622985] print_address_description+0x6c/0x23c
[ 62.629744] ? get_hw_stats+0x122/0x230 [hfi1]
[ 62.636108] kasan_report.cold.6+0x241/0x308
[ 62.642365] get_hw_stats+0x122/0x230 [hfi1]
[ 62.648703] ? hfi1_alloc_rn+0x40/0x40 [hfi1]
[ 62.655088] ? __kmalloc+0x110/0x240
[ 62.660695] ? hfi1_alloc_rn+0x40/0x40 [hfi1]
[ 62.667142] setup_hw_stats+0xd8/0x430 [ib_core]
[ 62.673972] ? show_hfi+0x50/0x50 [hfi1]
[ 62.680026] ib_device_register_sysfs+0x165/0x180 [ib_core]
[ 62.687995] ib_register_device+0x5a2/0xa10 [ib_core]
[ 62.695340] ? show_hfi+0x50/0x50 [hfi1]
[ 62.701421] ? ib_unregister_device+0x2e0/0x2e0 [ib_core]
[ 62.709222] ? __vmalloc_node_range+0x2d0/0x380
[ 62.716131] ? rvt_driver_mr_init+0x11f/0x2d0 [rdmavt]
[ 62.723735] ? vmalloc_node+0x5c/0x70
[ 62.729697] ? rvt_driver_mr_init+0x11f/0x2d0 [rdmavt]
[ 62.737347] ? rvt_driver_mr_init+0x1f5/0x2d0 [rdmavt]
[ 62.744998] ? __rvt_alloc_mr+0x110/0x110 [rdmavt]
[ 62.752315] ? rvt_rc_error+0x140/0x140 [rdmavt]
[ 62.759434] ? rvt_vma_open+0x30/0x30 [rdmavt]
[ 62.766364] ? mutex_unlock+0x1d/0x40
[ 62.772445] ? kmem_cache_create_usercopy+0x15d/0x230
[ 62.780115] rvt_register_device+0x1f6/0x360 [rdmavt]
[ 62.787823] ? rvt_get_port_immutable+0x180/0x180 [rdmavt]
[ 62.796058] ? __get_txreq+0x400/0x400 [hfi1]
[ 62.802969] ? memcpy+0x34/0x50
[ 62.808611] hfi1_register_ib_device+0xde6/0xeb0 [hfi1]
[ 62.816601] ? hfi1_get_npkeys+0x10/0x10 [hfi1]
[ 62.823760] ? hfi1_init+0x89f/0x9a0 [hfi1]
[ 62.830469] ? hfi1_setup_eagerbufs+0xad0/0xad0 [hfi1]
[ 62.838204] ? pcie_capability_clear_and_set_word+0xcd/0xe0
[ 62.846429] ? pcie_capability_read_word+0xd0/0xd0
[ 62.853791] ? hfi1_pcie_init+0x187/0x4b0 [hfi1]
[ 62.860958] init_one+0x67f/0xae0 [hfi1]
[ 62.867301] ? hfi1_init+0x9a0/0x9a0 [hfi1]
[ 62.873876] ? wait_woken+0x130/0x130
[ 62.879860] ? read_word_at_a_time+0xe/0x20
[ 62.886329] ? strscpy+0x14b/0x280
[ 62.891998] ? hfi1_init+0x9a0/0x9a0 [hfi1]
[ 62.898405] local_pci_probe+0x70/0xd0
[ 62.904295] ? pci_device_shutdown+0x90/0x90
[ 62.910833] work_for_cpu_fn+0x29/0x40
[ 62.916750] process_one_work+0x584/0x960
[ 62.922974] ? rcu_work_rcufn+0x40/0x40
[ 62.928991] ? __schedule+0x396/0xdc0
[ 62.934806] ? __sched_text_start+0x8/0x8
[ 62.941020] ? pick_next_task_fair+0x68b/0xc60
[ 62.947674] ? run_rebalance_domains+0x260/0x260
[ 62.954471] ? __list_add_valid+0x29/0xa0
[ 62.960607] ? move_linked_works+0x1c7/0x230
[ 62.967077] ?
trace_event_raw_event_workqueue_execute_start+0x140/0x140
[ 62.976248] ? mutex_lock+0xa6/0x100
[ 62.982029] ? __mutex_lock_slowpath+0x10/0x10
[ 62.988795] ? __switch_to+0x37a/0x710
[ 62.994731] worker_thread+0x62e/0x9d0
[ 63.000602] ? max_active_store+0xf0/0xf0
[ 63.006828] ? __switch_to_asm+0x40/0x70
[ 63.012932] ? __switch_to_asm+0x34/0x70
[ 63.019013] ? __switch_to_asm+0x40/0x70
[ 63.025042] ? __switch_to_asm+0x34/0x70
[ 63.031030] ? __switch_to_asm+0x40/0x70
[ 63.037006] ? __schedule+0x396/0xdc0
[ 63.042660] ? kmem_cache_alloc_trace+0xf3/0x1f0
[ 63.049323] ? kthread+0x59/0x1d0
[ 63.054594] ? ret_from_fork+0x35/0x40
[ 63.060257] ? __sched_text_start+0x8/0x8
[ 63.066212] ? schedule+0xcf/0x250
[ 63.071529] ? __wake_up_common+0x110/0x350
[ 63.077794] ? __schedule+0xdc0/0xdc0
[ 63.083348] ? wait_woken+0x130/0x130
[ 63.088963] ? finish_task_switch+0x1f1/0x520
[ 63.095258] ? kasan_unpoison_shadow+0x30/0x40
[ 63.101792] ? __init_waitqueue_head+0xa0/0xd0
[ 63.108183] ? replenish_dl_entity.cold.60+0x18/0x18
[ 63.115151] ? _raw_spin_lock_irqsave+0x25/0x50
[ 63.121754] ? max_active_store+0xf0/0xf0
[ 63.127753] kthread+0x1ae/0x1d0
[ 63.132894] ? kthread_bind+0x30/0x30
[ 63.138422] ret_from_fork+0x35/0x40

[ 63.146973] Allocated by task 14:
[ 63.152077] kasan_kmalloc+0xbf/0xe0
[ 63.157471] __kmalloc+0x110/0x240
[ 63.162804] init_cntrs+0x34d/0xdf0 [hfi1]
[ 63.168883] hfi1_init_dd+0x29a3/0x2f90 [hfi1]
[ 63.175244] init_one+0x551/0xae0 [hfi1]
[ 63.181065] local_pci_probe+0x70/0xd0
[ 63.186759] work_for_cpu_fn+0x29/0x40
[ 63.192310] process_one_work+0x584/0x960
[ 63.198163] worker_thread+0x62e/0x9d0
[ 63.203843] kthread+0x1ae/0x1d0
[ 63.208874] ret_from_fork+0x35/0x40

[ 63.217203] Freed by task 1:
[ 63.221844] __kasan_slab_free+0x12e/0x180
[ 63.227844] kfree+0x92/0x1a0
[ 63.232570] single_release+0x3a/0x60
[ 63.238024] __fput+0x1d9/0x480
[ 63.242911] task_work_run+0x139/0x190
[ 63.248440] exit_to_usermode_loop+0x191/0x1a0
[ 63.254814] do_syscall_64+0x301/0x330
[ 63.260283] entry_SYSCALL_64_after_hwframe+0x44/0xa9

[ 63.270199] The buggy address belongs to the object at
ffff88080e8d5500
which belongs to the cache kmalloc-4096 of size 4096
[ 63.287247] The buggy address is located 3632 bytes inside of
4096-byte region [ffff88080e8d5500, ffff88080e8d6500)
[ 63.303564] The buggy address belongs to the page:
[ 63.310447] page:ffffea00203a3400 count:1 mapcount:0
mapping:ffff88081380e840 index:0x0 compound_mapcount: 0
[ 63.323102] flags: 0x2fffff80008100(slab|head)
[ 63.329775] raw: 002fffff80008100 0000000000000000 0000000100000001
ffff88081380e840
[ 63.340175] raw: 0000000000000000 0000000000070007 00000001ffffffff
0000000000000000
[ 63.350564] page dumped because: kasan: bad access detected

[ 63.361974] Memory state around the buggy address:
[ 63.369137] ffff88080e8d6200: 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00
[ 63.379082] ffff88080e8d6280: 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00
[ 63.389032] >ffff88080e8d6300: 00 00 00 00 00 00 fc fc fc fc fc fc fc
fc fc fc
[ 63.398944] ^
[ 63.406141] ffff88080e8d6380: fc fc fc fc fc fc fc fc fc fc fc fc fc
fc fc fc
[ 63.416109] ffff88080e8d6400: fc fc fc fc fc fc fc fc fc fc fc fc fc
fc fc fc
[ 63.426099]
==================================================================

The trace happens because get_hw_stats() assumes there is room in the
memory allocated in init_cntrs() to accommodate the driver counters.
Unfortunately, that routine only allocated space for the device
counters.

Fix by insuring the allocation has room for the additional driver
counters.

Cc: <[email protected]> # v4.14+
Fixes: b7481944b06e9 ("IB/hfi1: Show statistics counters under IB stats interface")
Reviewed-by: Mike Marciniczyn <[email protected]>
Reviewed-by: Mike Ruhl <[email protected]>
Signed-off-by: Piotr Stankiewicz <[email protected]>
Signed-off-by: Dennis Dalessandro <[email protected]>
Signed-off-by: Doug Ledford <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>

---
drivers/infiniband/hw/hfi1/chip.c | 3 ++-
drivers/infiniband/hw/hfi1/hfi.h | 2 ++
drivers/infiniband/hw/hfi1/verbs.c | 2 +-
3 files changed, 5 insertions(+), 2 deletions(-)

--- a/drivers/infiniband/hw/hfi1/chip.c
+++ b/drivers/infiniband/hw/hfi1/chip.c
@@ -12485,7 +12485,8 @@ static int init_cntrs(struct hfi1_devdat
}

/* allocate space for the counter values */
- dd->cntrs = kcalloc(dd->ndevcntrs, sizeof(u64), GFP_KERNEL);
+ dd->cntrs = kcalloc(dd->ndevcntrs + num_driver_cntrs, sizeof(u64),
+ GFP_KERNEL);
if (!dd->cntrs)
goto bail;

--- a/drivers/infiniband/hw/hfi1/hfi.h
+++ b/drivers/infiniband/hw/hfi1/hfi.h
@@ -154,6 +154,8 @@ struct hfi1_ib_stats {
extern struct hfi1_ib_stats hfi1_stats;
extern const struct pci_error_handlers hfi1_pci_err_handler;

+extern int num_driver_cntrs;
+
/*
* First-cut criterion for "device is active" is
* two thousand dwords combined Tx, Rx traffic per
--- a/drivers/infiniband/hw/hfi1/verbs.c
+++ b/drivers/infiniband/hw/hfi1/verbs.c
@@ -1701,7 +1701,7 @@ static const char * const driver_cntr_na
static DEFINE_MUTEX(cntr_names_lock); /* protects the *_cntr_names bufers */
static const char **dev_cntr_names;
static const char **port_cntr_names;
-static int num_driver_cntrs = ARRAY_SIZE(driver_cntr_names);
+int num_driver_cntrs = ARRAY_SIZE(driver_cntr_names);
static int num_dev_cntrs;
static int num_port_cntrs;
static int cntr_names_initialized;



2018-12-14 12:10:18

by Greg Kroah-Hartman

[permalink] [raw]
Subject: [PATCH 4.19 124/142] ocfs2: fix deadlock caused by ocfs2_defrag_extent()

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit e21e57445a64598b29a6f629688f9b9a39e7242a ]

ocfs2_defrag_extent may fall into deadlock.

ocfs2_ioctl_move_extents
ocfs2_ioctl_move_extents
ocfs2_move_extents
ocfs2_defrag_extent
ocfs2_lock_allocators_move_extents

ocfs2_reserve_clusters
inode_lock GLOBAL_BITMAP_SYSTEM_INODE

__ocfs2_flush_truncate_log
inode_lock GLOBAL_BITMAP_SYSTEM_INODE

As backtrace shows above, ocfs2_reserve_clusters() will call inode_lock
against the global bitmap if local allocator has not sufficient cluters.
Once global bitmap could meet the demand, ocfs2_reserve_cluster will
return success with global bitmap locked.

After ocfs2_reserve_cluster(), if truncate log is full,
__ocfs2_flush_truncate_log() will definitely fall into deadlock because
it needs to inode_lock global bitmap, which has already been locked.

To fix this bug, we could remove from
ocfs2_lock_allocators_move_extents() the code which intends to lock
global allocator, and put the removed code after
__ocfs2_flush_truncate_log().

ocfs2_lock_allocators_move_extents() is referred by 2 places, one is
here, the other does not need the data allocator context, which means
this patch does not affect the caller so far.

Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Larry Chen <[email protected]>
Reviewed-by: Changwei Ge <[email protected]>
Cc: Mark Fasheh <[email protected]>
Cc: Joel Becker <[email protected]>
Cc: Junxiao Bi <[email protected]>
Cc: Joseph Qi <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/ocfs2/move_extents.c | 47 +++++++++++++++++++++++------------------
1 file changed, 26 insertions(+), 21 deletions(-)

diff --git a/fs/ocfs2/move_extents.c b/fs/ocfs2/move_extents.c
index 7eb3b0a6347e..f55f82ca3425 100644
--- a/fs/ocfs2/move_extents.c
+++ b/fs/ocfs2/move_extents.c
@@ -156,18 +156,14 @@ static int __ocfs2_move_extent(handle_t *handle,
}

/*
- * lock allocators, and reserving appropriate number of bits for
- * meta blocks and data clusters.
- *
- * in some cases, we don't need to reserve clusters, just let data_ac
- * be NULL.
+ * lock allocator, and reserve appropriate number of bits for
+ * meta blocks.
*/
-static int ocfs2_lock_allocators_move_extents(struct inode *inode,
+static int ocfs2_lock_meta_allocator_move_extents(struct inode *inode,
struct ocfs2_extent_tree *et,
u32 clusters_to_move,
u32 extents_to_split,
struct ocfs2_alloc_context **meta_ac,
- struct ocfs2_alloc_context **data_ac,
int extra_blocks,
int *credits)
{
@@ -192,13 +188,6 @@ static int ocfs2_lock_allocators_move_extents(struct inode *inode,
goto out;
}

- if (data_ac) {
- ret = ocfs2_reserve_clusters(osb, clusters_to_move, data_ac);
- if (ret) {
- mlog_errno(ret);
- goto out;
- }
- }

*credits += ocfs2_calc_extend_credits(osb->sb, et->et_root_el);

@@ -257,10 +246,10 @@ static int ocfs2_defrag_extent(struct ocfs2_move_extents_context *context,
}
}

- ret = ocfs2_lock_allocators_move_extents(inode, &context->et, *len, 1,
- &context->meta_ac,
- &context->data_ac,
- extra_blocks, &credits);
+ ret = ocfs2_lock_meta_allocator_move_extents(inode, &context->et,
+ *len, 1,
+ &context->meta_ac,
+ extra_blocks, &credits);
if (ret) {
mlog_errno(ret);
goto out;
@@ -283,6 +272,21 @@ static int ocfs2_defrag_extent(struct ocfs2_move_extents_context *context,
}
}

+ /*
+ * Make sure ocfs2_reserve_cluster is called after
+ * __ocfs2_flush_truncate_log, otherwise, dead lock may happen.
+ *
+ * If ocfs2_reserve_cluster is called
+ * before __ocfs2_flush_truncate_log, dead lock on global bitmap
+ * may happen.
+ *
+ */
+ ret = ocfs2_reserve_clusters(osb, *len, &context->data_ac);
+ if (ret) {
+ mlog_errno(ret);
+ goto out_unlock_mutex;
+ }
+
handle = ocfs2_start_trans(osb, credits);
if (IS_ERR(handle)) {
ret = PTR_ERR(handle);
@@ -600,9 +604,10 @@ static int ocfs2_move_extent(struct ocfs2_move_extents_context *context,
}
}

- ret = ocfs2_lock_allocators_move_extents(inode, &context->et, len, 1,
- &context->meta_ac,
- NULL, extra_blocks, &credits);
+ ret = ocfs2_lock_meta_allocator_move_extents(inode, &context->et,
+ len, 1,
+ &context->meta_ac,
+ extra_blocks, &credits);
if (ret) {
mlog_errno(ret);
goto out;
--
2.19.1




2018-12-14 12:10:27

by Greg Kroah-Hartman

[permalink] [raw]
Subject: [PATCH 4.19 117/142] fscache: fix race between enablement and dropping of object

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit c5a94f434c82529afda290df3235e4d85873c5b4 ]

It was observed that a process blocked indefintely in
__fscache_read_or_alloc_page(), waiting for FSCACHE_COOKIE_LOOKING_UP
to be cleared via fscache_wait_for_deferred_lookup().

At this time, ->backing_objects was empty, which would normaly prevent
__fscache_read_or_alloc_page() from getting to the point of waiting.
This implies that ->backing_objects was cleared *after*
__fscache_read_or_alloc_page was was entered.

When an object is "killed" and then "dropped",
FSCACHE_COOKIE_LOOKING_UP is cleared in fscache_lookup_failure(), then
KILL_OBJECT and DROP_OBJECT are "called" and only in DROP_OBJECT is
->backing_objects cleared. This leaves a window where
something else can set FSCACHE_COOKIE_LOOKING_UP and
__fscache_read_or_alloc_page() can start waiting, before
->backing_objects is cleared

There is some uncertainty in this analysis, but it seems to be fit the
observations. Adding the wake in this patch will be handled correctly
by __fscache_read_or_alloc_page(), as it checks if ->backing_objects
is empty again, after waiting.

Customer which reported the hang, also report that the hang cannot be
reproduced with this fix.

The backtrace for the blocked process looked like:

PID: 29360 TASK: ffff881ff2ac0f80 CPU: 3 COMMAND: "zsh"
#0 [ffff881ff43efbf8] schedule at ffffffff815e56f1
#1 [ffff881ff43efc58] bit_wait at ffffffff815e64ed
#2 [ffff881ff43efc68] __wait_on_bit at ffffffff815e61b8
#3 [ffff881ff43efca0] out_of_line_wait_on_bit at ffffffff815e625e
#4 [ffff881ff43efd08] fscache_wait_for_deferred_lookup at ffffffffa04f2e8f [fscache]
#5 [ffff881ff43efd18] __fscache_read_or_alloc_page at ffffffffa04f2ffe [fscache]
#6 [ffff881ff43efd58] __nfs_readpage_from_fscache at ffffffffa0679668 [nfs]
#7 [ffff881ff43efd78] nfs_readpage at ffffffffa067092b [nfs]
#8 [ffff881ff43efda0] generic_file_read_iter at ffffffff81187a73
#9 [ffff881ff43efe50] nfs_file_read at ffffffffa066544b [nfs]
#10 [ffff881ff43efe70] __vfs_read at ffffffff811fc756
#11 [ffff881ff43efee8] vfs_read at ffffffff811fccfa
#12 [ffff881ff43eff18] sys_read at ffffffff811fda62
#13 [ffff881ff43eff50] entry_SYSCALL_64_fastpath at ffffffff815e986e

Signed-off-by: NeilBrown <[email protected]>
Signed-off-by: David Howells <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/fscache/object.c | 3 +++
1 file changed, 3 insertions(+)

diff --git a/fs/fscache/object.c b/fs/fscache/object.c
index 9edc920f651f..6d9cb1719de5 100644
--- a/fs/fscache/object.c
+++ b/fs/fscache/object.c
@@ -730,6 +730,9 @@ static const struct fscache_state *fscache_drop_object(struct fscache_object *ob

if (awaken)
wake_up_bit(&cookie->flags, FSCACHE_COOKIE_INVALIDATING);
+ if (test_and_clear_bit(FSCACHE_COOKIE_LOOKING_UP, &cookie->flags))
+ wake_up_bit(&cookie->flags, FSCACHE_COOKIE_LOOKING_UP);
+

/* Prevent a race with our last child, which has to signal EV_CLEARED
* before dropping our spinlock.
--
2.19.1




2018-12-14 12:36:35

by Greg Kroah-Hartman

[permalink] [raw]
Subject: [PATCH 4.19 126/142] hfs: do not free node before using

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit ce96a407adef126870b3f4a1b73529dd8aa80f49 ]

hfs_bmap_free() frees the node via hfs_bnode_put(node). However, it
then reads node->this when dumping error message on an error path, which
may result in a use-after-free bug. This patch frees the node only when
it is never again used.

Link: http://lkml.kernel.org/r/[email protected]
Fixes: a1185ffa2fc ("HFS rewrite")
Signed-off-by: Pan Bian <[email protected]>
Reviewed-by: Andrew Morton <[email protected]>
Cc: Joe Perches <[email protected]>
Cc: Ernesto A. Fernandez <[email protected]>
Cc: Viacheslav Dubeyko <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/hfs/btree.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/fs/hfs/btree.c b/fs/hfs/btree.c
index 374b5688e29e..9bdff5e40626 100644
--- a/fs/hfs/btree.c
+++ b/fs/hfs/btree.c
@@ -329,13 +329,14 @@ void hfs_bmap_free(struct hfs_bnode *node)

nidx -= len * 8;
i = node->next;
- hfs_bnode_put(node);
if (!i) {
/* panic */;
pr_crit("unable to free bnode %u. bmap not found!\n",
node->this);
+ hfs_bnode_put(node);
return;
}
+ hfs_bnode_put(node);
node = hfs_bnode_find(tree, i);
if (IS_ERR(node))
return;
--
2.19.1




2018-12-14 12:36:38

by Greg Kroah-Hartman

[permalink] [raw]
Subject: [PATCH 4.19 125/142] mm/page_alloc.c: fix calculation of pgdat->nr_zones

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit 8f416836c0d50b198cad1225132e5abebf8980dc ]

init_currently_empty_zone() will adjust pgdat->nr_zones and set it to
'zone_idx(zone) + 1' unconditionally. This is correct in the normal
case, while not exact in hot-plug situation.

This function is used in two places:

* free_area_init_core()
* move_pfn_range_to_zone()

In the first case, we are sure zone index increase monotonically. While
in the second one, this is under users control.

One way to reproduce this is:
----------------------------

1. create a virtual machine with empty node1

-m 4G,slots=32,maxmem=32G \
-smp 4,maxcpus=8 \
-numa node,nodeid=0,mem=4G,cpus=0-3 \
-numa node,nodeid=1,mem=0G,cpus=4-7

2. hot-add cpu 3-7

cpu-add [3-7]

2. hot-add memory to nod1

object_add memory-backend-ram,id=ram0,size=1G
device_add pc-dimm,id=dimm0,memdev=ram0,node=1

3. online memory with following order

echo online_movable > memory47/state
echo online > memory40/state

After this, node1 will have its nr_zones equals to (ZONE_NORMAL + 1)
instead of (ZONE_MOVABLE + 1).

Michal said:
"Having an incorrect nr_zones might result in all sorts of problems
which would be quite hard to debug (e.g. reclaim not considering the
movable zone). I do not expect many users would suffer from this it
but still this is trivial and obviously right thing to do so
backporting to the stable tree shouldn't be harmful (last famous
words)"

Link: http://lkml.kernel.org/r/[email protected]
Fixes: f1dd2cd13c4b ("mm, memory_hotplug: do not associate hotadded memory to zones until online")
Signed-off-by: Wei Yang <[email protected]>
Acked-by: Michal Hocko <[email protected]>
Reviewed-by: Oscar Salvador <[email protected]>
Cc: Anshuman Khandual <[email protected]>
Cc: Dave Hansen <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>

Signed-off-by: Sasha Levin <[email protected]>
---
mm/page_alloc.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/mm/page_alloc.c b/mm/page_alloc.c
index b721631d78ab..6a62b2421cdf 100644
--- a/mm/page_alloc.c
+++ b/mm/page_alloc.c
@@ -5733,8 +5733,10 @@ void __meminit init_currently_empty_zone(struct zone *zone,
unsigned long size)
{
struct pglist_data *pgdat = zone->zone_pgdat;
+ int zone_idx = zone_idx(zone) + 1;

- pgdat->nr_zones = zone_idx(zone) + 1;
+ if (zone_idx > pgdat->nr_zones)
+ pgdat->nr_zones = zone_idx;

zone->zone_start_pfn = zone_start_pfn;

--
2.19.1




2018-12-14 12:36:44

by Greg Kroah-Hartman

[permalink] [raw]
Subject: [PATCH 4.19 123/142] ACPI/IORT: Fix iort_get_platform_device_domain() uninitialized pointer value

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit ea2412dc21cc790335d319181dddc43682aef164 ]

Running the Clang static analyzer on IORT code detected the following
error:

Logic error: Branch condition evaluates to a garbage value

in

iort_get_platform_device_domain()

If the named component associated with a given device has no IORT
mappings, iort_get_platform_device_domain() exits its MSI mapping loop
with msi_parent pointer containing garbage, which can lead to erroneous
code path execution.

Initialize the msi_parent pointer, fixing the bug.

Fixes: d4f54a186667 ("ACPI: platform: setup MSI domain for ACPI based
platform device")
Reported-by: Patrick Bellasi <[email protected]>
Reviewed-by: Hanjun Guo <[email protected]>
Acked-by: Will Deacon <[email protected]>
Cc: Sudeep Holla <[email protected]>
Cc: "Rafael J. Wysocki" <[email protected]>
Signed-off-by: Lorenzo Pieralisi <[email protected]>
Signed-off-by: Catalin Marinas <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/acpi/arm64/iort.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/acpi/arm64/iort.c b/drivers/acpi/arm64/iort.c
index 08f26db2da7e..e938576e58cb 100644
--- a/drivers/acpi/arm64/iort.c
+++ b/drivers/acpi/arm64/iort.c
@@ -700,7 +700,7 @@ static void iort_set_device_domain(struct device *dev,
*/
static struct irq_domain *iort_get_platform_device_domain(struct device *dev)
{
- struct acpi_iort_node *node, *msi_parent;
+ struct acpi_iort_node *node, *msi_parent = NULL;
struct fwnode_handle *iort_fwnode;
struct acpi_iort_its_group *its;
int i;
--
2.19.1




2018-12-14 12:36:56

by Greg Kroah-Hartman

[permalink] [raw]
Subject: [PATCH 4.19 121/142] nvme: flush namespace scanning work just before removing namespaces

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit f6c8e432cb0479255322c5d0335b9f1699a0270c ]

nvme_stop_ctrl can be called also for reset flow and there is no need to
flush the scan_work as namespaces are not being removed. This can cause
deadlock in rdma, fc and loop drivers since nvme_stop_ctrl barriers
before controller teardown (and specifically I/O cancellation of the
scan_work itself) takes place, but the scan_work will be blocked anyways
so there is no need to flush it.

Instead, move scan_work flush to nvme_remove_namespaces() where it really
needs to flush.

Reported-by: Ming Lei <[email protected]>
Signed-off-by: Sagi Grimberg <[email protected]>
Reviewed-by: Keith Busch <[email protected]>
Reviewed by: James Smart <[email protected]>
Tested-by: Ewan D. Milne <[email protected]>
Signed-off-by: Christoph Hellwig <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/nvme/host/core.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/nvme/host/core.c b/drivers/nvme/host/core.c
index 0ba301f7e8b4..b7b2659e02fa 100644
--- a/drivers/nvme/host/core.c
+++ b/drivers/nvme/host/core.c
@@ -3308,6 +3308,9 @@ void nvme_remove_namespaces(struct nvme_ctrl *ctrl)
struct nvme_ns *ns, *next;
LIST_HEAD(ns_list);

+ /* prevent racing with ns scanning */
+ flush_work(&ctrl->scan_work);
+
/*
* The dead states indicates the controller was not gracefully
* disconnected. In that case, we won't be able to flush any data while
@@ -3463,7 +3466,6 @@ void nvme_stop_ctrl(struct nvme_ctrl *ctrl)
nvme_mpath_stop(ctrl);
nvme_stop_keep_alive(ctrl);
flush_work(&ctrl->async_event_work);
- flush_work(&ctrl->scan_work);
cancel_work_sync(&ctrl->fw_act_work);
if (ctrl->ops->stop_ctrl)
ctrl->ops->stop_ctrl(ctrl);
--
2.19.1




2018-12-14 12:37:02

by Greg Kroah-Hartman

[permalink] [raw]
Subject: [PATCH 4.19 138/142] ALSA: hda/realtek: Enable audio jacks of ASUS UX533FD with ALC294

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

From: Jian-Hong Pan <[email protected]>

commit 4e051106730dfc640a8b49db88440af304726f4d upstream.

The ASUS UX533FD with ALC294 cannot detect the headset MIC and outputs
through the internal speaker and the headphone until
ALC294_FIXUP_ASUS_SPK and ALC294_FIXUP_ASUS_HEADSET_MIC quirk applied.

Signed-off-by: Daniel Drake <[email protected]>
Signed-off-by: Jian-Hong Pan <[email protected]>
Cc: <[email protected]>
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>

---
sound/pci/hda/patch_realtek.c | 23 +++++++++++++++++++++++
1 file changed, 23 insertions(+)

--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -5521,6 +5521,8 @@ enum {
ALC295_FIXUP_HP_AUTO_MUTE,
ALC286_FIXUP_ACER_AIO_MIC_NO_PRESENCE,
ALC294_FIXUP_ASUS_MIC,
+ ALC294_FIXUP_ASUS_HEADSET_MIC,
+ ALC294_FIXUP_ASUS_SPK,
};

static const struct hda_fixup alc269_fixups[] = {
@@ -6417,6 +6419,26 @@ static const struct hda_fixup alc269_fix
.chained = true,
.chain_id = ALC269_FIXUP_HEADSET_MODE_NO_HP_MIC
},
+ [ALC294_FIXUP_ASUS_HEADSET_MIC] = {
+ .type = HDA_FIXUP_PINS,
+ .v.pins = (const struct hda_pintbl[]) {
+ { 0x19, 0x01a1113c }, /* use as headset mic, without its own jack detect */
+ { }
+ },
+ .chained = true,
+ .chain_id = ALC269_FIXUP_HEADSET_MODE_NO_HP_MIC
+ },
+ [ALC294_FIXUP_ASUS_SPK] = {
+ .type = HDA_FIXUP_VERBS,
+ .v.verbs = (const struct hda_verb[]) {
+ /* Set EAPD high */
+ { 0x20, AC_VERB_SET_COEF_INDEX, 0x40 },
+ { 0x20, AC_VERB_SET_PROC_COEF, 0x8800 },
+ { }
+ },
+ .chained = true,
+ .chain_id = ALC294_FIXUP_ASUS_HEADSET_MIC
+ },
};

static const struct snd_pci_quirk alc269_fixup_tbl[] = {
@@ -6559,6 +6581,7 @@ static const struct snd_pci_quirk alc269
SND_PCI_QUIRK(0x1043, 0x12e0, "ASUS X541SA", ALC256_FIXUP_ASUS_MIC),
SND_PCI_QUIRK(0x1043, 0x13b0, "ASUS Z550SA", ALC256_FIXUP_ASUS_MIC),
SND_PCI_QUIRK(0x1043, 0x1427, "Asus Zenbook UX31E", ALC269VB_FIXUP_ASUS_ZENBOOK),
+ SND_PCI_QUIRK(0x1043, 0x14a1, "ASUS UX533FD", ALC294_FIXUP_ASUS_SPK),
SND_PCI_QUIRK(0x1043, 0x1517, "Asus Zenbook UX31A", ALC269VB_FIXUP_ASUS_ZENBOOK_UX31A),
SND_PCI_QUIRK(0x1043, 0x16e3, "ASUS UX50", ALC269_FIXUP_STEREO_DMIC),
SND_PCI_QUIRK(0x1043, 0x1a13, "Asus G73Jw", ALC269_FIXUP_ASUS_G73JW),



2018-12-14 12:37:10

by Greg Kroah-Hartman

[permalink] [raw]
Subject: [PATCH 4.19 119/142] fscache, cachefiles: remove redundant variable cache

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit 31ffa563833576bd49a8bf53120568312755e6e2 ]

Variable 'cache' is being assigned but is never used hence it is
redundant and can be removed.

Cleans up clang warning:
warning: variable 'cache' set but not used [-Wunused-but-set-variable]

Signed-off-by: Colin Ian King <[email protected]>
Signed-off-by: David Howells <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/cachefiles/rdwr.c | 3 ---
1 file changed, 3 deletions(-)

diff --git a/fs/cachefiles/rdwr.c b/fs/cachefiles/rdwr.c
index db233588a69a..8a577409d030 100644
--- a/fs/cachefiles/rdwr.c
+++ b/fs/cachefiles/rdwr.c
@@ -968,11 +968,8 @@ void cachefiles_uncache_page(struct fscache_object *_object, struct page *page)
__releases(&object->fscache.cookie->lock)
{
struct cachefiles_object *object;
- struct cachefiles_cache *cache;

object = container_of(_object, struct cachefiles_object, fscache);
- cache = container_of(object->fscache.cache,
- struct cachefiles_cache, cache);

_enter("%p,{%lu}", object, page->index);

--
2.19.1




2018-12-14 12:37:12

by Greg Kroah-Hartman

[permalink] [raw]
Subject: [PATCH 4.19 137/142] ALSA: hda/realtek: ALC294 mic and headset-mode fixups for ASUS X542UN

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

From: Chris Chiu <[email protected]>

commit d8ae458eeca9ed686e09a1b894867cb91fc4c1cb upstream.

The known ALC256_FIXUP_ASUS_MIC fixup can fix the headphone jack
sensing and enable use of the internal microphone on this laptop
X542UN. However, it's ALC294 so create a new fixup named
ALC294_FIXUP_ASUS_MIC to avoid confusion.

Signed-off-by: Jian-Hong Pan <[email protected]>
Signed-off-by: Daniel Drake <[email protected]>
Signed-off-by: Chris Chiu <[email protected]>
Cc: <[email protected]>
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>

---
sound/pci/hda/patch_realtek.c | 15 +++++++++++++++
1 file changed, 15 insertions(+)

--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -5520,6 +5520,7 @@ enum {
ALC285_FIXUP_LENOVO_HEADPHONE_NOISE,
ALC295_FIXUP_HP_AUTO_MUTE,
ALC286_FIXUP_ACER_AIO_MIC_NO_PRESENCE,
+ ALC294_FIXUP_ASUS_MIC,
};

static const struct hda_fixup alc269_fixups[] = {
@@ -6406,6 +6407,16 @@ static const struct hda_fixup alc269_fix
.chained = true,
.chain_id = ALC269_FIXUP_HEADSET_MIC
},
+ [ALC294_FIXUP_ASUS_MIC] = {
+ .type = HDA_FIXUP_PINS,
+ .v.pins = (const struct hda_pintbl[]) {
+ { 0x13, 0x90a60160 }, /* use as internal mic */
+ { 0x19, 0x04a11120 }, /* use as headset mic, without its own jack detect */
+ { }
+ },
+ .chained = true,
+ .chain_id = ALC269_FIXUP_HEADSET_MODE_NO_HP_MIC
+ },
};

static const struct snd_pci_quirk alc269_fixup_tbl[] = {
@@ -7155,6 +7166,10 @@ static const struct snd_hda_pin_quirk al
SND_HDA_PIN_QUIRK(0x10ec0293, 0x1028, "Dell", ALC293_FIXUP_DELL1_MIC_NO_PRESENCE,
ALC292_STANDARD_PINS,
{0x13, 0x90a60140}),
+ SND_HDA_PIN_QUIRK(0x10ec0294, 0x1043, "ASUS", ALC294_FIXUP_ASUS_MIC,
+ {0x14, 0x90170110},
+ {0x1b, 0x90a70130},
+ {0x21, 0x04211020}),
SND_HDA_PIN_QUIRK(0x10ec0295, 0x1028, "Dell", ALC269_FIXUP_DELL1_MIC_NO_PRESENCE,
ALC295_STANDARD_PINS,
{0x17, 0x21014020},



2018-12-14 12:37:24

by Greg Kroah-Hartman

[permalink] [raw]
Subject: [PATCH 4.19 132/142] ocfs2: fix potential use after free

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit 164f7e586739d07eb56af6f6d66acebb11f315c8 ]

ocfs2_get_dentry() calls iput(inode) to drop the reference count of
inode, and if the reference count hits 0, inode is freed. However, in
this function, it then reads inode->i_generation, which may result in a
use after free bug. Move the put operation later.

Link: http://lkml.kernel.org/r/[email protected]
Fixes: 781f200cb7a("ocfs2: Remove masklog ML_EXPORT.")
Signed-off-by: Pan Bian <[email protected]>
Reviewed-by: Andrew Morton <[email protected]>
Cc: Mark Fasheh <[email protected]>
Cc: Joel Becker <[email protected]>
Cc: Junxiao Bi <[email protected]>
Cc: Joseph Qi <[email protected]>
Cc: Changwei Ge <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/ocfs2/export.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

--- a/fs/ocfs2/export.c
+++ b/fs/ocfs2/export.c
@@ -125,10 +125,10 @@ check_err:

check_gen:
if (handle->ih_generation != inode->i_generation) {
- iput(inode);
trace_ocfs2_get_dentry_generation((unsigned long long)blkno,
handle->ih_generation,
inode->i_generation);
+ iput(inode);
result = ERR_PTR(-ESTALE);
goto bail;
}



2018-12-14 12:37:29

by Greg Kroah-Hartman

[permalink] [raw]
Subject: [PATCH 4.19 134/142] dax: Check page->mapping isnt NULL

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

From: Matthew Wilcox <[email protected]>

commit c93db7bb6ef3251e0ea48ade311d3e9942748e1c upstream.

If we race with inode destroy, it's possible for page->mapping to be
NULL before we even enter this routine, as well as after having slept
waiting for the dax entry to become unlocked.

Fixes: c2a7d2a11552 ("filesystem-dax: Introduce dax_lock_mapping_entry()")
Cc: <[email protected]>
Reported-by: Jan Kara <[email protected]>
Signed-off-by: Matthew Wilcox <[email protected]>
Reviewed-by: Johannes Thumshirn <[email protected]>
Reviewed-by: Jan Kara <[email protected]>
Signed-off-by: Dan Williams <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>

---
fs/dax.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

--- a/fs/dax.c
+++ b/fs/dax.c
@@ -423,7 +423,7 @@ bool dax_lock_mapping_entry(struct page
for (;;) {
mapping = READ_ONCE(page->mapping);

- if (!dax_mapping(mapping))
+ if (!mapping || !dax_mapping(mapping))
break;

/*



2018-12-14 12:37:34

by Greg Kroah-Hartman

[permalink] [raw]
Subject: [PATCH 4.19 120/142] nvme: warn when finding multi-port subsystems without multipathing enabled

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit 14a1336e6fff47dd1028b484d6c802105c58e2ee ]

Without CONFIG_NVME_MULTIPATH enabled a multi-port subsystem might
show up as invididual devices and cause problems, warn about it.

Signed-off-by: Christoph Hellwig <[email protected]>
Reviewed-by: Sagi Grimberg <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/nvme/host/nvme.h | 3 +++
1 file changed, 3 insertions(+)

diff --git a/drivers/nvme/host/nvme.h b/drivers/nvme/host/nvme.h
index bb4a2003c097..60220de2db52 100644
--- a/drivers/nvme/host/nvme.h
+++ b/drivers/nvme/host/nvme.h
@@ -537,6 +537,9 @@ static inline void nvme_mpath_check_last_path(struct nvme_ns *ns)
static inline int nvme_mpath_init(struct nvme_ctrl *ctrl,
struct nvme_id_ctrl *id)
{
+ if (ctrl->subsys->cmic & (1 << 3))
+ dev_warn(ctrl->device,
+"Please enable CONFIG_NVME_MULTIPATH for full support of multi-port devices.\n");
return 0;
}
static inline void nvme_mpath_uninit(struct nvme_ctrl *ctrl)
--
2.19.1




2018-12-14 12:38:02

by Greg Kroah-Hartman

[permalink] [raw]
Subject: [PATCH 4.19 122/142] nvme-rdma: fix double freeing of async event data

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit 6344d02dc8f886b6bbcd922ae1a17e4a41500f2d ]

Some error paths in configuration of admin queue free data buffer
associated with async request SQE without resetting the data buffer
pointer to NULL, This buffer is also freed up again if the controller
is shutdown or reset.

Signed-off-by: Prabhath Sajeepa <[email protected]>
Reviewed-by: Roland Dreier <[email protected]>
Signed-off-by: Christoph Hellwig <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/nvme/host/rdma.c | 2 ++
1 file changed, 2 insertions(+)

diff --git a/drivers/nvme/host/rdma.c b/drivers/nvme/host/rdma.c
index dc042017c293..b6a28de682e8 100644
--- a/drivers/nvme/host/rdma.c
+++ b/drivers/nvme/host/rdma.c
@@ -184,6 +184,7 @@ static int nvme_rdma_alloc_qe(struct ib_device *ibdev, struct nvme_rdma_qe *qe,
qe->dma = ib_dma_map_single(ibdev, qe->data, capsule_size, dir);
if (ib_dma_mapping_error(ibdev, qe->dma)) {
kfree(qe->data);
+ qe->data = NULL;
return -ENOMEM;
}

@@ -816,6 +817,7 @@ static int nvme_rdma_configure_admin_queue(struct nvme_rdma_ctrl *ctrl,
out_free_async_qe:
nvme_rdma_free_qe(ctrl->device->dev, &ctrl->async_event_sqe,
sizeof(struct nvme_command), DMA_TO_DEVICE);
+ ctrl->async_event_sqe.data = NULL;
out_free_queue:
nvme_rdma_free_queue(&ctrl->queues[0]);
return error;
--
2.19.1




2018-12-14 12:38:13

by Greg Kroah-Hartman

[permalink] [raw]
Subject: [PATCH 4.19 129/142] proc: fixup map_files test on arm

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit dbd4af54745fc0c805217693c807a3928b2d408b ]

https://bugs.linaro.org/show_bug.cgi?id=3782

Turns out arm doesn't permit mapping address 0, so try minimum virtual
address instead.

Link: http://lkml.kernel.org/r/20181113165446.GA28157@avx2
Signed-off-by: Alexey Dobriyan <[email protected]>
Reported-by: Rafael David Tinoco <[email protected]>
Tested-by: Rafael David Tinoco <[email protected]>
Acked-by: Cyrill Gorcunov <[email protected]>
Cc: Shuah Khan <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
tools/testing/selftests/proc/proc-self-map-files-002.c | 9 +++++++--
1 file changed, 7 insertions(+), 2 deletions(-)

diff --git a/tools/testing/selftests/proc/proc-self-map-files-002.c b/tools/testing/selftests/proc/proc-self-map-files-002.c
index 6f1f4a6e1ecb..85744425b08d 100644
--- a/tools/testing/selftests/proc/proc-self-map-files-002.c
+++ b/tools/testing/selftests/proc/proc-self-map-files-002.c
@@ -13,7 +13,7 @@
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*/
-/* Test readlink /proc/self/map_files/... with address 0. */
+/* Test readlink /proc/self/map_files/... with minimum address. */
#include <errno.h>
#include <sys/types.h>
#include <sys/stat.h>
@@ -47,6 +47,11 @@ static void fail(const char *fmt, unsigned long a, unsigned long b)
int main(void)
{
const unsigned int PAGE_SIZE = sysconf(_SC_PAGESIZE);
+#ifdef __arm__
+ unsigned long va = 2 * PAGE_SIZE;
+#else
+ unsigned long va = 0;
+#endif
void *p;
int fd;
unsigned long a, b;
@@ -55,7 +60,7 @@ int main(void)
if (fd == -1)
return 1;

- p = mmap(NULL, PAGE_SIZE, PROT_NONE, MAP_PRIVATE|MAP_FILE|MAP_FIXED, fd, 0);
+ p = mmap((void *)va, PAGE_SIZE, PROT_NONE, MAP_PRIVATE|MAP_FILE|MAP_FIXED, fd, 0);
if (p == MAP_FAILED) {
if (errno == EPERM)
return 2;
--
2.19.1




2018-12-14 12:38:30

by Greg Kroah-Hartman

[permalink] [raw]
Subject: [PATCH 4.19 092/142] netfilter: ipv6: Preserve link scope traffic original oif

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit 508b09046c0f21678652fb66fd1e9959d55591d2 ]

When ip6_route_me_harder is invoked, it resets outgoing interface of:
- link-local scoped packets sent by neighbor discovery
- multicast packets sent by MLD host
- multicast packets send by MLD proxy daemon that sets outgoing
interface through IPV6_PKTINFO ipi6_ifindex

Link-local and multicast packets must keep their original oif after
ip6_route_me_harder is called.

Signed-off-by: Alin Nastac <[email protected]>
Signed-off-by: Pablo Neira Ayuso <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/ipv6/netfilter.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/net/ipv6/netfilter.c b/net/ipv6/netfilter.c
index 5ae8e1c51079..8b075f0bc351 100644
--- a/net/ipv6/netfilter.c
+++ b/net/ipv6/netfilter.c
@@ -24,7 +24,8 @@ int ip6_route_me_harder(struct net *net, struct sk_buff *skb)
unsigned int hh_len;
struct dst_entry *dst;
struct flowi6 fl6 = {
- .flowi6_oif = sk ? sk->sk_bound_dev_if : 0,
+ .flowi6_oif = sk && sk->sk_bound_dev_if ? sk->sk_bound_dev_if :
+ rt6_need_strict(&iph->daddr) ? skb_dst(skb)->dev->ifindex : 0,
.flowi6_mark = skb->mark,
.flowi6_uid = sock_net_uid(net, sk),
.daddr = iph->daddr,
--
2.19.1




2018-12-14 12:38:38

by Greg Kroah-Hartman

[permalink] [raw]
Subject: [PATCH 4.19 099/142] x86/kvm/vmx: fix old-style function declaration

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit 1e4329ee2c52692ea42cc677fb2133519718b34a ]

The inline keyword which is not at the beginning of the function
declaration may trigger the following build warnings, so let's fix it:

arch/x86/kvm/vmx.c:1309:1: warning: ‘inline’ is not at beginning of declaration [-Wold-style-declaration]
arch/x86/kvm/vmx.c:5947:1: warning: ‘inline’ is not at beginning of declaration [-Wold-style-declaration]
arch/x86/kvm/vmx.c:5985:1: warning: ‘inline’ is not at beginning of declaration [-Wold-style-declaration]
arch/x86/kvm/vmx.c:6023:1: warning: ‘inline’ is not at beginning of declaration [-Wold-style-declaration]

Signed-off-by: Yi Wang <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/x86/kvm/vmx.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c
index b1aef90aab91..c97a9d60d305 100644
--- a/arch/x86/kvm/vmx.c
+++ b/arch/x86/kvm/vmx.c
@@ -1285,7 +1285,7 @@ static void vmx_set_nmi_mask(struct kvm_vcpu *vcpu, bool masked);
static bool nested_vmx_is_page_fault_vmexit(struct vmcs12 *vmcs12,
u16 error_code);
static void vmx_update_msr_bitmap(struct kvm_vcpu *vcpu);
-static void __always_inline vmx_disable_intercept_for_msr(unsigned long *msr_bitmap,
+static __always_inline void vmx_disable_intercept_for_msr(unsigned long *msr_bitmap,
u32 msr, int type);

static DEFINE_PER_CPU(struct vmcs *, vmxarea);
@@ -5935,7 +5935,7 @@ static void free_vpid(int vpid)
spin_unlock(&vmx_vpid_lock);
}

-static void __always_inline vmx_disable_intercept_for_msr(unsigned long *msr_bitmap,
+static __always_inline void vmx_disable_intercept_for_msr(unsigned long *msr_bitmap,
u32 msr, int type)
{
int f = sizeof(unsigned long);
@@ -5973,7 +5973,7 @@ static void __always_inline vmx_disable_intercept_for_msr(unsigned long *msr_bit
}
}

-static void __always_inline vmx_enable_intercept_for_msr(unsigned long *msr_bitmap,
+static __always_inline void vmx_enable_intercept_for_msr(unsigned long *msr_bitmap,
u32 msr, int type)
{
int f = sizeof(unsigned long);
@@ -6011,7 +6011,7 @@ static void __always_inline vmx_enable_intercept_for_msr(unsigned long *msr_bitm
}
}

-static void __always_inline vmx_set_intercept_for_msr(unsigned long *msr_bitmap,
+static __always_inline void vmx_set_intercept_for_msr(unsigned long *msr_bitmap,
u32 msr, int type, bool value)
{
if (value)
--
2.19.1




2018-12-14 12:38:47

by Greg Kroah-Hartman

[permalink] [raw]
Subject: [PATCH 4.19 100/142] net: thunderx: fix NULL pointer dereference in nic_remove

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit 24a6d2dd263bc910de018c78d1148b3e33b94512 ]

Fix a possible NULL pointer dereference in nic_remove routine
removing the nicpf module if nic_probe fails.
The issue can be triggered with the following reproducer:

$rmmod nicvf
$rmmod nicpf

[ 521.412008] Unable to handle kernel access to user memory outside uaccess routines at virtual address 0000000000000014
[ 521.422777] Mem abort info:
[ 521.425561] ESR = 0x96000004
[ 521.428624] Exception class = DABT (current EL), IL = 32 bits
[ 521.434535] SET = 0, FnV = 0
[ 521.437579] EA = 0, S1PTW = 0
[ 521.440730] Data abort info:
[ 521.443603] ISV = 0, ISS = 0x00000004
[ 521.447431] CM = 0, WnR = 0
[ 521.450417] user pgtable: 4k pages, 48-bit VAs, pgdp = 0000000072a3da42
[ 521.457022] [0000000000000014] pgd=0000000000000000
[ 521.461916] Internal error: Oops: 96000004 [#1] SMP
[ 521.511801] Hardware name: GIGABYTE H270-T70/MT70-HD0, BIOS T49 02/02/2018
[ 521.518664] pstate: 80400005 (Nzcv daif +PAN -UAO)
[ 521.523451] pc : nic_remove+0x24/0x88 [nicpf]
[ 521.527808] lr : pci_device_remove+0x48/0xd8
[ 521.532066] sp : ffff000013433cc0
[ 521.535370] x29: ffff000013433cc0 x28: ffff810f6ac50000
[ 521.540672] x27: 0000000000000000 x26: 0000000000000000
[ 521.545974] x25: 0000000056000000 x24: 0000000000000015
[ 521.551274] x23: ffff8007ff89a110 x22: ffff000001667070
[ 521.556576] x21: ffff8007ffb170b0 x20: ffff8007ffb17000
[ 521.561877] x19: 0000000000000000 x18: 0000000000000025
[ 521.567178] x17: 0000000000000000 x16: 000000000000010ffc33ff98 x8 : 0000000000000000
[ 521.593683] x7 : 0000000000000000 x6 : 0000000000000001
[ 521.598983] x5 : 0000000000000002 x4 : 0000000000000003
[ 521.604284] x3 : ffff8007ffb17184 x2 : ffff8007ffb17184
[ 521.609585] x1 : ffff000001662118 x0 : ffff000008557be0
[ 521.614887] Process rmmod (pid: 1897, stack limit = 0x00000000859535c3)
[ 521.621490] Call trace:
[ 521.623928] nic_remove+0x24/0x88 [nicpf]
[ 521.627927] pci_device_remove+0x48/0xd8
[ 521.631847] device_release_driver_internal+0x1b0/0x248
[ 521.637062] driver_detach+0x50/0xc0
[ 521.640628] bus_remove_driver+0x60/0x100
[ 521.644627] driver_unregister+0x34/0x60
[ 521.648538] pci_unregister_driver+0x24/0xd8
[ 521.652798] nic_cleanup_module+0x14/0x111c [nicpf]
[ 521.657672] __arm64_sys_delete_module+0x150/0x218
[ 521.662460] el0_svc_handler+0x94/0x110
[ 521.666287] el0_svc+0x8/0xc
[ 521.669160] Code: aa1e03e0 9102c295 d503201f f9404eb3 (b9401660)

Fixes: 4863dea3fab0 ("net: Adding support for Cavium ThunderX network controller")
Signed-off-by: Lorenzo Bianconi <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/cavium/thunder/nic_main.c | 3 +++
1 file changed, 3 insertions(+)

diff --git a/drivers/net/ethernet/cavium/thunder/nic_main.c b/drivers/net/ethernet/cavium/thunder/nic_main.c
index 55af04fa03a7..6c8dcb65ff03 100644
--- a/drivers/net/ethernet/cavium/thunder/nic_main.c
+++ b/drivers/net/ethernet/cavium/thunder/nic_main.c
@@ -1441,6 +1441,9 @@ static void nic_remove(struct pci_dev *pdev)
{
struct nicpf *nic = pci_get_drvdata(pdev);

+ if (!nic)
+ return;
+
if (nic->flags & NIC_SRIOV_ENABLED)
pci_disable_sriov(pdev);

--
2.19.1




2018-12-14 12:38:59

by Greg Kroah-Hartman

[permalink] [raw]
Subject: [PATCH 4.19 096/142] netfilter: nf_conncount: remove wrong condition check routine

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit 53ca0f2fec39c80ccd19e6e3f30cc8daef174b70 ]

All lists that reach the tree_nodes_free() function have both zero
counter and true dead flag. The reason for this is that lists to be
release are selected by nf_conncount_gc_list() which already decrements
the list counter and sets on the dead flag. Therefore, this if statement
in tree_nodes_free() is unnecessary and wrong.

Fixes: 31568ec09ea0 ("netfilter: nf_conncount: fix list_del corruption in conn_free")
Signed-off-by: Taehee Yoo <[email protected]>
Signed-off-by: Pablo Neira Ayuso <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/netfilter/nf_conncount.c | 7 ++-----
1 file changed, 2 insertions(+), 5 deletions(-)

diff --git a/net/netfilter/nf_conncount.c b/net/netfilter/nf_conncount.c
index 8acae4a3e4c0..b6d0f6deea86 100644
--- a/net/netfilter/nf_conncount.c
+++ b/net/netfilter/nf_conncount.c
@@ -323,11 +323,8 @@ static void tree_nodes_free(struct rb_root *root,
while (gc_count) {
rbconn = gc_nodes[--gc_count];
spin_lock(&rbconn->list.list_lock);
- if (rbconn->list.count == 0 && rbconn->list.dead == false) {
- rbconn->list.dead = true;
- rb_erase(&rbconn->node, root);
- call_rcu(&rbconn->rcu_head, __tree_nodes_free);
- }
+ rb_erase(&rbconn->node, root);
+ call_rcu(&rbconn->rcu_head, __tree_nodes_free);
spin_unlock(&rbconn->list.list_lock);
}
}
--
2.19.1




2018-12-14 12:39:01

by Greg Kroah-Hartman

[permalink] [raw]
Subject: [PATCH 4.19 114/142] pvcalls-front: fixes incorrect error handling

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit 975ef94a0284648fb0137bd5e949b18cef604e33 ]

kfree() is incorrectly used to release the pages allocated by
__get_free_page() and __get_free_pages(). Use the matching deallocators
i.e., free_page() and free_pages(), respectively.

Signed-off-by: Pan Bian <[email protected]>
Reviewed-by: Stefano Stabellini <[email protected]>
Signed-off-by: Juergen Gross <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/xen/pvcalls-front.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/xen/pvcalls-front.c b/drivers/xen/pvcalls-front.c
index 2f11ca72a281..77224d8f3e6f 100644
--- a/drivers/xen/pvcalls-front.c
+++ b/drivers/xen/pvcalls-front.c
@@ -385,8 +385,8 @@ static int create_active(struct sock_mapping *map, int *evtchn)
out_error:
if (*evtchn >= 0)
xenbus_free_evtchn(pvcalls_front_dev, *evtchn);
- kfree(map->active.data.in);
- kfree(map->active.ring);
+ free_pages((unsigned long)map->active.data.in, PVCALLS_RING_ORDER);
+ free_page((unsigned long)map->active.ring);
return ret;
}

--
2.19.1




2018-12-14 12:39:05

by Greg Kroah-Hartman

[permalink] [raw]
Subject: [PATCH 4.19 115/142] pstore/ram: Correctly calculate usable PRZ bytes

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit 89d328f637b9904b6d4c9af73c8a608b8dd4d6f8 ]

The actual number of bytes stored in a PRZ is smaller than the
bytes requested by platform data, since there is a header on each
PRZ. Additionally, if ECC is enabled, there are trailing bytes used
as well. Normally this mismatch doesn't matter since PRZs are circular
buffers and the leading "overflow" bytes are just thrown away. However, in
the case of a compressed record, this rather badly corrupts the results.

This corruption was visible with "ramoops.mem_size=204800 ramoops.ecc=1".
Any stored crashes would not be uncompressable (producing a pstorefs
"dmesg-*.enc.z" file), and triggering errors at boot:

[ 2.790759] pstore: crypto_comp_decompress failed, ret = -22!

Backporting this depends on commit 70ad35db3321 ("pstore: Convert console
write to use ->write_buf")

Reported-by: Joel Fernandes <[email protected]>
Fixes: b0aad7a99c1d ("pstore: Add compression support to pstore")
Signed-off-by: Kees Cook <[email protected]>
Reviewed-by: Joel Fernandes (Google) <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/pstore/ram.c | 15 ++++++---------
include/linux/pstore.h | 5 ++++-
2 files changed, 10 insertions(+), 10 deletions(-)

diff --git a/fs/pstore/ram.c b/fs/pstore/ram.c
index f4fd2e72add4..03cd59375abe 100644
--- a/fs/pstore/ram.c
+++ b/fs/pstore/ram.c
@@ -806,17 +806,14 @@ static int ramoops_probe(struct platform_device *pdev)

cxt->pstore.data = cxt;
/*
- * Console can handle any buffer size, so prefer LOG_LINE_MAX. If we
- * have to handle dumps, we must have at least record_size buffer. And
- * for ftrace, bufsize is irrelevant (if bufsize is 0, buf will be
- * ZERO_SIZE_PTR).
+ * Since bufsize is only used for dmesg crash dumps, it
+ * must match the size of the dprz record (after PRZ header
+ * and ECC bytes have been accounted for).
*/
- if (cxt->console_size)
- cxt->pstore.bufsize = 1024; /* LOG_LINE_MAX */
- cxt->pstore.bufsize = max(cxt->record_size, cxt->pstore.bufsize);
- cxt->pstore.buf = kmalloc(cxt->pstore.bufsize, GFP_KERNEL);
+ cxt->pstore.bufsize = cxt->dprzs[0]->buffer_size;
+ cxt->pstore.buf = kzalloc(cxt->pstore.bufsize, GFP_KERNEL);
if (!cxt->pstore.buf) {
- pr_err("cannot allocate pstore buffer\n");
+ pr_err("cannot allocate pstore crash dump buffer\n");
err = -ENOMEM;
goto fail_clear;
}
diff --git a/include/linux/pstore.h b/include/linux/pstore.h
index a15bc4d48752..30fcec375a3a 100644
--- a/include/linux/pstore.h
+++ b/include/linux/pstore.h
@@ -90,7 +90,10 @@ struct pstore_record {
*
* @buf_lock: spinlock to serialize access to @buf
* @buf: preallocated crash dump buffer
- * @bufsize: size of @buf available for crash dump writes
+ * @bufsize: size of @buf available for crash dump bytes (must match
+ * smallest number of bytes available for writing to a
+ * backend entry, since compressed bytes don't take kindly
+ * to being truncated)
*
* @read_mutex: serializes @open, @read, @close, and @erase callbacks
* @flags: bitfield of frontends the backend can accept writes for
--
2.19.1




2018-12-14 12:39:24

by Greg Kroah-Hartman

[permalink] [raw]
Subject: [PATCH 4.19 094/142] netfilter: add missing error handling code for register functions

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit 584eab291c67894cb17cc87544b9d086228ea70f ]

register_{netdevice/inetaddr/inet6addr}_notifier may return an error
value, this patch adds the code to handle these error paths.

Signed-off-by: Taehee Yoo <[email protected]>
Signed-off-by: Pablo Neira Ayuso <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
.../net/netfilter/ipv4/nf_nat_masquerade.h | 2 +-
.../net/netfilter/ipv6/nf_nat_masquerade.h | 2 +-
net/ipv4/netfilter/ipt_MASQUERADE.c | 7 ++--
net/ipv4/netfilter/nf_nat_masquerade_ipv4.c | 21 +++++++++---
net/ipv4/netfilter/nft_masq_ipv4.c | 4 ++-
net/ipv6/netfilter/ip6t_MASQUERADE.c | 8 +++--
net/ipv6/netfilter/nf_nat_masquerade_ipv6.c | 32 +++++++++++++------
net/ipv6/netfilter/nft_masq_ipv6.c | 4 ++-
net/netfilter/nft_flow_offload.c | 5 ++-
9 files changed, 63 insertions(+), 22 deletions(-)

diff --git a/include/net/netfilter/ipv4/nf_nat_masquerade.h b/include/net/netfilter/ipv4/nf_nat_masquerade.h
index cd24be4c4a99..13d55206bb9f 100644
--- a/include/net/netfilter/ipv4/nf_nat_masquerade.h
+++ b/include/net/netfilter/ipv4/nf_nat_masquerade.h
@@ -9,7 +9,7 @@ nf_nat_masquerade_ipv4(struct sk_buff *skb, unsigned int hooknum,
const struct nf_nat_range2 *range,
const struct net_device *out);

-void nf_nat_masquerade_ipv4_register_notifier(void);
+int nf_nat_masquerade_ipv4_register_notifier(void);
void nf_nat_masquerade_ipv4_unregister_notifier(void);

#endif /*_NF_NAT_MASQUERADE_IPV4_H_ */
diff --git a/include/net/netfilter/ipv6/nf_nat_masquerade.h b/include/net/netfilter/ipv6/nf_nat_masquerade.h
index 0c3b5ebf0bb8..2917bf95c437 100644
--- a/include/net/netfilter/ipv6/nf_nat_masquerade.h
+++ b/include/net/netfilter/ipv6/nf_nat_masquerade.h
@@ -5,7 +5,7 @@
unsigned int
nf_nat_masquerade_ipv6(struct sk_buff *skb, const struct nf_nat_range2 *range,
const struct net_device *out);
-void nf_nat_masquerade_ipv6_register_notifier(void);
+int nf_nat_masquerade_ipv6_register_notifier(void);
void nf_nat_masquerade_ipv6_unregister_notifier(void);

#endif /* _NF_NAT_MASQUERADE_IPV6_H_ */
diff --git a/net/ipv4/netfilter/ipt_MASQUERADE.c b/net/ipv4/netfilter/ipt_MASQUERADE.c
index ce1512b02cb2..fd3f9e8a74da 100644
--- a/net/ipv4/netfilter/ipt_MASQUERADE.c
+++ b/net/ipv4/netfilter/ipt_MASQUERADE.c
@@ -81,9 +81,12 @@ static int __init masquerade_tg_init(void)
int ret;

ret = xt_register_target(&masquerade_tg_reg);
+ if (ret)
+ return ret;

- if (ret == 0)
- nf_nat_masquerade_ipv4_register_notifier();
+ ret = nf_nat_masquerade_ipv4_register_notifier();
+ if (ret)
+ xt_unregister_target(&masquerade_tg_reg);

return ret;
}
diff --git a/net/ipv4/netfilter/nf_nat_masquerade_ipv4.c b/net/ipv4/netfilter/nf_nat_masquerade_ipv4.c
index ad3aeff152ed..4a7c1f207d6e 100644
--- a/net/ipv4/netfilter/nf_nat_masquerade_ipv4.c
+++ b/net/ipv4/netfilter/nf_nat_masquerade_ipv4.c
@@ -133,16 +133,29 @@ static struct notifier_block masq_inet_notifier = {

static atomic_t masquerade_notifier_refcount = ATOMIC_INIT(0);

-void nf_nat_masquerade_ipv4_register_notifier(void)
+int nf_nat_masquerade_ipv4_register_notifier(void)
{
+ int ret;
+
/* check if the notifier was already set */
if (atomic_inc_return(&masquerade_notifier_refcount) > 1)
- return;
+ return 0;

/* Register for device down reports */
- register_netdevice_notifier(&masq_dev_notifier);
+ ret = register_netdevice_notifier(&masq_dev_notifier);
+ if (ret)
+ goto err_dec;
/* Register IP address change reports */
- register_inetaddr_notifier(&masq_inet_notifier);
+ ret = register_inetaddr_notifier(&masq_inet_notifier);
+ if (ret)
+ goto err_unregister;
+
+ return ret;
+err_unregister:
+ unregister_netdevice_notifier(&masq_dev_notifier);
+err_dec:
+ atomic_dec(&masquerade_notifier_refcount);
+ return ret;
}
EXPORT_SYMBOL_GPL(nf_nat_masquerade_ipv4_register_notifier);

diff --git a/net/ipv4/netfilter/nft_masq_ipv4.c b/net/ipv4/netfilter/nft_masq_ipv4.c
index f1193e1e928a..6847de1d1db8 100644
--- a/net/ipv4/netfilter/nft_masq_ipv4.c
+++ b/net/ipv4/netfilter/nft_masq_ipv4.c
@@ -69,7 +69,9 @@ static int __init nft_masq_ipv4_module_init(void)
if (ret < 0)
return ret;

- nf_nat_masquerade_ipv4_register_notifier();
+ ret = nf_nat_masquerade_ipv4_register_notifier();
+ if (ret)
+ nft_unregister_expr(&nft_masq_ipv4_type);

return ret;
}
diff --git a/net/ipv6/netfilter/ip6t_MASQUERADE.c b/net/ipv6/netfilter/ip6t_MASQUERADE.c
index 491f808e356a..29c7f1915a96 100644
--- a/net/ipv6/netfilter/ip6t_MASQUERADE.c
+++ b/net/ipv6/netfilter/ip6t_MASQUERADE.c
@@ -58,8 +58,12 @@ static int __init masquerade_tg6_init(void)
int err;

err = xt_register_target(&masquerade_tg6_reg);
- if (err == 0)
- nf_nat_masquerade_ipv6_register_notifier();
+ if (err)
+ return err;
+
+ err = nf_nat_masquerade_ipv6_register_notifier();
+ if (err)
+ xt_unregister_target(&masquerade_tg6_reg);

return err;
}
diff --git a/net/ipv6/netfilter/nf_nat_masquerade_ipv6.c b/net/ipv6/netfilter/nf_nat_masquerade_ipv6.c
index e6eb7cf9b54f..10012fc687b6 100644
--- a/net/ipv6/netfilter/nf_nat_masquerade_ipv6.c
+++ b/net/ipv6/netfilter/nf_nat_masquerade_ipv6.c
@@ -120,8 +120,8 @@ static void iterate_cleanup_work(struct work_struct *work)
* of ipv6 addresses being deleted), we also need to add an upper
* limit to the number of queued work items.
*/
-static int masq_inet_event(struct notifier_block *this,
- unsigned long event, void *ptr)
+static int masq_inet6_event(struct notifier_block *this,
+ unsigned long event, void *ptr)
{
struct inet6_ifaddr *ifa = ptr;
const struct net_device *dev;
@@ -158,20 +158,34 @@ static int masq_inet_event(struct notifier_block *this,
return NOTIFY_DONE;
}

-static struct notifier_block masq_inet_notifier = {
- .notifier_call = masq_inet_event,
+static struct notifier_block masq_inet6_notifier = {
+ .notifier_call = masq_inet6_event,
};

static atomic_t masquerade_notifier_refcount = ATOMIC_INIT(0);

-void nf_nat_masquerade_ipv6_register_notifier(void)
+int nf_nat_masquerade_ipv6_register_notifier(void)
{
+ int ret;
+
/* check if the notifier is already set */
if (atomic_inc_return(&masquerade_notifier_refcount) > 1)
- return;
+ return 0;

- register_netdevice_notifier(&masq_dev_notifier);
- register_inet6addr_notifier(&masq_inet_notifier);
+ ret = register_netdevice_notifier(&masq_dev_notifier);
+ if (ret)
+ goto err_dec;
+
+ ret = register_inet6addr_notifier(&masq_inet6_notifier);
+ if (ret)
+ goto err_unregister;
+
+ return ret;
+err_unregister:
+ unregister_netdevice_notifier(&masq_dev_notifier);
+err_dec:
+ atomic_dec(&masquerade_notifier_refcount);
+ return ret;
}
EXPORT_SYMBOL_GPL(nf_nat_masquerade_ipv6_register_notifier);

@@ -181,7 +195,7 @@ void nf_nat_masquerade_ipv6_unregister_notifier(void)
if (atomic_dec_return(&masquerade_notifier_refcount) > 0)
return;

- unregister_inet6addr_notifier(&masq_inet_notifier);
+ unregister_inet6addr_notifier(&masq_inet6_notifier);
unregister_netdevice_notifier(&masq_dev_notifier);
}
EXPORT_SYMBOL_GPL(nf_nat_masquerade_ipv6_unregister_notifier);
diff --git a/net/ipv6/netfilter/nft_masq_ipv6.c b/net/ipv6/netfilter/nft_masq_ipv6.c
index dd0122f3cffe..e06c82e9dfcd 100644
--- a/net/ipv6/netfilter/nft_masq_ipv6.c
+++ b/net/ipv6/netfilter/nft_masq_ipv6.c
@@ -70,7 +70,9 @@ static int __init nft_masq_ipv6_module_init(void)
if (ret < 0)
return ret;

- nf_nat_masquerade_ipv6_register_notifier();
+ ret = nf_nat_masquerade_ipv6_register_notifier();
+ if (ret)
+ nft_unregister_expr(&nft_masq_ipv6_type);

return ret;
}
diff --git a/net/netfilter/nft_flow_offload.c b/net/netfilter/nft_flow_offload.c
index d6bab8c3cbb0..5fd4c57c79cc 100644
--- a/net/netfilter/nft_flow_offload.c
+++ b/net/netfilter/nft_flow_offload.c
@@ -214,7 +214,9 @@ static int __init nft_flow_offload_module_init(void)
{
int err;

- register_netdevice_notifier(&flow_offload_netdev_notifier);
+ err = register_netdevice_notifier(&flow_offload_netdev_notifier);
+ if (err)
+ goto err;

err = nft_register_expr(&nft_flow_offload_type);
if (err < 0)
@@ -224,6 +226,7 @@ static int __init nft_flow_offload_module_init(void)

register_expr:
unregister_netdevice_notifier(&flow_offload_netdev_notifier);
+err:
return err;
}

--
2.19.1




2018-12-14 12:39:31

by Greg Kroah-Hartman

[permalink] [raw]
Subject: [PATCH 4.19 110/142] drm/amdgpu: Add delay after enable RLC ucode

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit ad97d9de45835b6a0f71983b0ae0cffd7306730a ]

Driver shouldn't try to access any GFX registers until RLC is idle.
During the test, it took 12 seconds for RLC to clear the BUSY bit
in RLC_GPM_STAT register which is un-acceptable for driver.
As per RLC engineer, it would take RLC Ucode less than 10,000 GFXCLK
cycles to finish its critical section. In a lowest 300M enginer clock
setting(default from vbios), 50 us delay is enough.

This commit fix the hang when RLC introduce the work around for XGMI
which requires more cycles to setup more registers than normal

Signed-off-by: shaoyunl <[email protected]>
Acked-by: Felix Kuehling <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c | 7 ++++---
1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c b/drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c
index ef00d14f8645..325e2213cac5 100644
--- a/drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c
+++ b/drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c
@@ -2243,12 +2243,13 @@ static void gfx_v9_0_rlc_start(struct amdgpu_device *adev)
#endif

WREG32_FIELD15(GC, 0, RLC_CNTL, RLC_ENABLE_F32, 1);
+ udelay(50);

/* carrizo do enable cp interrupt after cp inited */
- if (!(adev->flags & AMD_IS_APU))
+ if (!(adev->flags & AMD_IS_APU)) {
gfx_v9_0_enable_gui_idle_interrupt(adev, true);
-
- udelay(50);
+ udelay(50);
+ }

#ifdef AMDGPU_RLC_DEBUG_RETRY
/* RLC_GPM_GENERAL_6 : RLC Ucode version */
--
2.19.1




2018-12-14 12:39:35

by Greg Kroah-Hartman

[permalink] [raw]
Subject: [PATCH 4.19 108/142] ixgbe: recognize 1000BaseLX SFP modules as 1Gbps

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit a8bf879af7b1999eba36303ce9cc60e0e7dd816c ]

Add the two 1000BaseLX enum values to the X550's check for 1Gbps modules,
allowing the core driver code to establish a link over this SFP type.

This is done by the out-of-tree driver but the fix wasn't in mainline.

Fixes: e23f33367882 ("ixgbe: Fix 1G and 10G link stability for X550EM_x SFP+”)
Fixes: 6a14ee0cfb19 ("ixgbe: Add X550 support function pointers")
Signed-off-by: Josh Elsasser <[email protected]>
Tested-by: Andrew Bowers <[email protected]>
Signed-off-by: Jeff Kirsher <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c
index a8148c7126e5..9772016222c3 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c
@@ -2248,7 +2248,9 @@ static s32 ixgbe_get_link_capabilities_X550em(struct ixgbe_hw *hw,
*autoneg = false;

if (hw->phy.sfp_type == ixgbe_sfp_type_1g_sx_core0 ||
- hw->phy.sfp_type == ixgbe_sfp_type_1g_sx_core1) {
+ hw->phy.sfp_type == ixgbe_sfp_type_1g_sx_core1 ||
+ hw->phy.sfp_type == ixgbe_sfp_type_1g_lx_core0 ||
+ hw->phy.sfp_type == ixgbe_sfp_type_1g_lx_core1) {
*speed = IXGBE_LINK_SPEED_1GB_FULL;
return 0;
}
--
2.19.1




2018-12-14 12:39:49

by Greg Kroah-Hartman

[permalink] [raw]
Subject: [PATCH 4.19 106/142] cachefiles: Fix page leak in cachefiles_read_backing_file while vmscan is active

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit 9a24ce5b66f9c8190d63b15f4473600db4935f1f ]

[Description]

In a heavily loaded system where the system pagecache is nearing memory
limits and fscache is enabled, pages can be leaked by fscache while trying
read pages from cachefiles backend. This can happen because two
applications can be reading same page from a single mount, two threads can
be trying to read the backing page at same time. This results in one of
the threads finding that a page for the backing file or netfs file is
already in the radix tree. During the error handling cachefiles does not
clean up the reference on backing page, leading to page leak.

[Fix]
The fix is straightforward, to decrement the reference when error is
encountered.

[dhowells: Note that I've removed the clearance and put of newpage as
they aren't attested in the commit message and don't appear to actually
achieve anything since a new page is only allocated is newpage!=NULL and
any residual new page is cleared before returning.]

[Testing]
I have tested the fix using following method for 12+ hrs.

1) mkdir -p /mnt/nfs ; mount -o vers=3,fsc <server_ip>:/export /mnt/nfs
2) create 10000 files of 2.8MB in a NFS mount.
3) start a thread to simulate heavy VM presssure
(while true ; do echo 3 > /proc/sys/vm/drop_caches ; sleep 1 ; done)&
4) start multiple parallel reader for data set at same time
find /mnt/nfs -type f | xargs -P 80 cat > /dev/null &
find /mnt/nfs -type f | xargs -P 80 cat > /dev/null &
find /mnt/nfs -type f | xargs -P 80 cat > /dev/null &
..
..
find /mnt/nfs -type f | xargs -P 80 cat > /dev/null &
find /mnt/nfs -type f | xargs -P 80 cat > /dev/null &
5) finally check using cat /proc/fs/fscache/stats | grep -i pages ;
free -h , cat /proc/meminfo and page-types -r -b lru
to ensure all pages are freed.

Reviewed-by: Daniel Axtens <[email protected]>
Signed-off-by: Shantanu Goel <[email protected]>
Signed-off-by: Kiran Kumar Modukuri <[email protected]>
[dja: forward ported to current upstream]
Signed-off-by: Daniel Axtens <[email protected]>
Signed-off-by: David Howells <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/cachefiles/rdwr.c | 6 ++++++
1 file changed, 6 insertions(+)

diff --git a/fs/cachefiles/rdwr.c b/fs/cachefiles/rdwr.c
index 40f7595aad10..db233588a69a 100644
--- a/fs/cachefiles/rdwr.c
+++ b/fs/cachefiles/rdwr.c
@@ -535,7 +535,10 @@ static int cachefiles_read_backing_file(struct cachefiles_object *object,
netpage->index, cachefiles_gfp);
if (ret < 0) {
if (ret == -EEXIST) {
+ put_page(backpage);
+ backpage = NULL;
put_page(netpage);
+ netpage = NULL;
fscache_retrieval_complete(op, 1);
continue;
}
@@ -608,7 +611,10 @@ static int cachefiles_read_backing_file(struct cachefiles_object *object,
netpage->index, cachefiles_gfp);
if (ret < 0) {
if (ret == -EEXIST) {
+ put_page(backpage);
+ backpage = NULL;
put_page(netpage);
+ netpage = NULL;
fscache_retrieval_complete(op, 1);
continue;
}
--
2.19.1




2018-12-14 12:39:57

by Greg Kroah-Hartman

[permalink] [raw]
Subject: [PATCH 4.19 095/142] netfilter: nat: fix double register in masquerade modules

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit 095faf45e64be00bff4da2d6182dface3d69c9b7 ]

There is a reference counter to ensure that masquerade modules register
notifiers only once. However, the existing reference counter approach is
not safe, test commands are:

while :
do
modprobe ip6t_MASQUERADE &
modprobe nft_masq_ipv6 &
modprobe -rv ip6t_MASQUERADE &
modprobe -rv nft_masq_ipv6 &
done

numbers below represent the reference counter.
--------------------------------------------------------
CPU0 CPU1 CPU2 CPU3 CPU4
[insmod] [insmod] [rmmod] [rmmod] [insmod]
--------------------------------------------------------
0->1
register 1->2
returns 2->1
returns 1->0
0->1
register <--
unregister
--------------------------------------------------------

The unregistation of CPU3 should be processed before the
registration of CPU4.

In order to fix this, use a mutex instead of reference counter.

splat looks like:
[ 323.869557] watchdog: BUG: soft lockup - CPU#0 stuck for 22s! [modprobe:1381]
[ 323.869574] Modules linked in: nf_tables(+) nf_nat_ipv6(-) nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 n]
[ 323.869574] irq event stamp: 194074
[ 323.898930] hardirqs last enabled at (194073): [<ffffffff90004a0d>] trace_hardirqs_on_thunk+0x1a/0x1c
[ 323.898930] hardirqs last disabled at (194074): [<ffffffff90004a29>] trace_hardirqs_off_thunk+0x1a/0x1c
[ 323.898930] softirqs last enabled at (182132): [<ffffffff922006ec>] __do_softirq+0x6ec/0xa3b
[ 323.898930] softirqs last disabled at (182109): [<ffffffff90193426>] irq_exit+0x1a6/0x1e0
[ 323.898930] CPU: 0 PID: 1381 Comm: modprobe Not tainted 4.20.0-rc2+ #27
[ 323.898930] RIP: 0010:raw_notifier_chain_register+0xea/0x240
[ 323.898930] Code: 3c 03 0f 8e f2 00 00 00 44 3b 6b 10 7f 4d 49 bc 00 00 00 00 00 fc ff df eb 22 48 8d 7b 10 488
[ 323.898930] RSP: 0018:ffff888101597218 EFLAGS: 00000206 ORIG_RAX: ffffffffffffff13
[ 323.898930] RAX: 0000000000000000 RBX: ffffffffc04361c0 RCX: 0000000000000000
[ 323.898930] RDX: 1ffffffff26132ae RSI: ffffffffc04aa3c0 RDI: ffffffffc04361d0
[ 323.898930] RBP: ffffffffc04361c8 R08: 0000000000000000 R09: 0000000000000001
[ 323.898930] R10: ffff8881015972b0 R11: fffffbfff26132c4 R12: dffffc0000000000
[ 323.898930] R13: 0000000000000000 R14: 1ffff110202b2e44 R15: ffffffffc04aa3c0
[ 323.898930] FS: 00007f813ed41540(0000) GS:ffff88811ae00000(0000) knlGS:0000000000000000
[ 323.898930] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 323.898930] CR2: 0000559bf2c9f120 CR3: 000000010bc80000 CR4: 00000000001006f0
[ 323.898930] Call Trace:
[ 323.898930] ? atomic_notifier_chain_register+0x2d0/0x2d0
[ 323.898930] ? down_read+0x150/0x150
[ 323.898930] ? sched_clock_cpu+0x126/0x170
[ 323.898930] ? nf_tables_core_module_init+0xe4/0xe4 [nf_tables]
[ 323.898930] ? nf_tables_core_module_init+0xe4/0xe4 [nf_tables]
[ 323.898930] register_netdevice_notifier+0xbb/0x790
[ 323.898930] ? __dev_close_many+0x2d0/0x2d0
[ 323.898930] ? __mutex_unlock_slowpath+0x17f/0x740
[ 323.898930] ? wait_for_completion+0x710/0x710
[ 323.898930] ? nf_tables_core_module_init+0xe4/0xe4 [nf_tables]
[ 323.898930] ? up_write+0x6c/0x210
[ 323.898930] ? nf_tables_core_module_init+0xe4/0xe4 [nf_tables]
[ 324.127073] ? nf_tables_core_module_init+0xe4/0xe4 [nf_tables]
[ 324.127073] nft_chain_filter_init+0x1e/0xe8a [nf_tables]
[ 324.127073] nf_tables_module_init+0x37/0x92 [nf_tables]
[ ... ]

Fixes: 8dd33cc93ec9 ("netfilter: nf_nat: generalize IPv4 masquerading support for nf_tables")
Fixes: be6b635cd674 ("netfilter: nf_nat: generalize IPv6 masquerading support for nf_tables")
Signed-off-by: Taehee Yoo <[email protected]>
Signed-off-by: Pablo Neira Ayuso <[email protected]>

Signed-off-by: Sasha Levin <[email protected]>
---
net/ipv4/netfilter/nf_nat_masquerade_ipv4.c | 23 ++++++++++++++-------
net/ipv6/netfilter/nf_nat_masquerade_ipv6.c | 23 ++++++++++++++-------
2 files changed, 32 insertions(+), 14 deletions(-)

diff --git a/net/ipv4/netfilter/nf_nat_masquerade_ipv4.c b/net/ipv4/netfilter/nf_nat_masquerade_ipv4.c
index 4a7c1f207d6e..4c7fcd32f8e6 100644
--- a/net/ipv4/netfilter/nf_nat_masquerade_ipv4.c
+++ b/net/ipv4/netfilter/nf_nat_masquerade_ipv4.c
@@ -131,15 +131,17 @@ static struct notifier_block masq_inet_notifier = {
.notifier_call = masq_inet_event,
};

-static atomic_t masquerade_notifier_refcount = ATOMIC_INIT(0);
+static int masq_refcnt;
+static DEFINE_MUTEX(masq_mutex);

int nf_nat_masquerade_ipv4_register_notifier(void)
{
- int ret;
+ int ret = 0;

+ mutex_lock(&masq_mutex);
/* check if the notifier was already set */
- if (atomic_inc_return(&masquerade_notifier_refcount) > 1)
- return 0;
+ if (++masq_refcnt > 1)
+ goto out_unlock;

/* Register for device down reports */
ret = register_netdevice_notifier(&masq_dev_notifier);
@@ -150,22 +152,29 @@ int nf_nat_masquerade_ipv4_register_notifier(void)
if (ret)
goto err_unregister;

+ mutex_unlock(&masq_mutex);
return ret;
+
err_unregister:
unregister_netdevice_notifier(&masq_dev_notifier);
err_dec:
- atomic_dec(&masquerade_notifier_refcount);
+ masq_refcnt--;
+out_unlock:
+ mutex_unlock(&masq_mutex);
return ret;
}
EXPORT_SYMBOL_GPL(nf_nat_masquerade_ipv4_register_notifier);

void nf_nat_masquerade_ipv4_unregister_notifier(void)
{
+ mutex_lock(&masq_mutex);
/* check if the notifier still has clients */
- if (atomic_dec_return(&masquerade_notifier_refcount) > 0)
- return;
+ if (--masq_refcnt > 0)
+ goto out_unlock;

unregister_netdevice_notifier(&masq_dev_notifier);
unregister_inetaddr_notifier(&masq_inet_notifier);
+out_unlock:
+ mutex_unlock(&masq_mutex);
}
EXPORT_SYMBOL_GPL(nf_nat_masquerade_ipv4_unregister_notifier);
diff --git a/net/ipv6/netfilter/nf_nat_masquerade_ipv6.c b/net/ipv6/netfilter/nf_nat_masquerade_ipv6.c
index 10012fc687b6..37b1d413c825 100644
--- a/net/ipv6/netfilter/nf_nat_masquerade_ipv6.c
+++ b/net/ipv6/netfilter/nf_nat_masquerade_ipv6.c
@@ -162,15 +162,17 @@ static struct notifier_block masq_inet6_notifier = {
.notifier_call = masq_inet6_event,
};

-static atomic_t masquerade_notifier_refcount = ATOMIC_INIT(0);
+static int masq_refcnt;
+static DEFINE_MUTEX(masq_mutex);

int nf_nat_masquerade_ipv6_register_notifier(void)
{
- int ret;
+ int ret = 0;

+ mutex_lock(&masq_mutex);
/* check if the notifier is already set */
- if (atomic_inc_return(&masquerade_notifier_refcount) > 1)
- return 0;
+ if (++masq_refcnt > 1)
+ goto out_unlock;

ret = register_netdevice_notifier(&masq_dev_notifier);
if (ret)
@@ -180,22 +182,29 @@ int nf_nat_masquerade_ipv6_register_notifier(void)
if (ret)
goto err_unregister;

+ mutex_unlock(&masq_mutex);
return ret;
+
err_unregister:
unregister_netdevice_notifier(&masq_dev_notifier);
err_dec:
- atomic_dec(&masquerade_notifier_refcount);
+ masq_refcnt--;
+out_unlock:
+ mutex_unlock(&masq_mutex);
return ret;
}
EXPORT_SYMBOL_GPL(nf_nat_masquerade_ipv6_register_notifier);

void nf_nat_masquerade_ipv6_unregister_notifier(void)
{
+ mutex_lock(&masq_mutex);
/* check if the notifier still has clients */
- if (atomic_dec_return(&masquerade_notifier_refcount) > 0)
- return;
+ if (--masq_refcnt > 0)
+ goto out_unlock;

unregister_inet6addr_notifier(&masq_inet6_notifier);
unregister_netdevice_notifier(&masq_dev_notifier);
+out_unlock:
+ mutex_unlock(&masq_mutex);
}
EXPORT_SYMBOL_GPL(nf_nat_masquerade_ipv6_unregister_notifier);
--
2.19.1




2018-12-14 12:40:12

by Greg Kroah-Hartman

[permalink] [raw]
Subject: [PATCH 4.19 093/142] IB/mlx5: Fix page fault handling for MW

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit 75b7b86bdb0df37e08e44b6c1f99010967f81944 ]

Memory windows are implemented with an indirect MKey, when a page fault
event comes for a MW Mkey we need to find the MR at the end of the list of
the indirect MKeys by iterating on all items from the first to the last.

The offset calculated during this process has to be zeroed after the first
iteration or the next iteration will start from a wrong address, resulting
incorrect ODP faulting behavior.

Fixes: db570d7deafb ("IB/mlx5: Add ODP support to MW")
Signed-off-by: Artemy Kovalyov <[email protected]>
Signed-off-by: Moni Shoua <[email protected]>
Signed-off-by: Leon Romanovsky <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/infiniband/hw/mlx5/odp.c | 1 +
1 file changed, 1 insertion(+)

diff --git a/drivers/infiniband/hw/mlx5/odp.c b/drivers/infiniband/hw/mlx5/odp.c
index d216e0d2921d..9e1cac8cb260 100644
--- a/drivers/infiniband/hw/mlx5/odp.c
+++ b/drivers/infiniband/hw/mlx5/odp.c
@@ -724,6 +724,7 @@ static int pagefault_single_data_segment(struct mlx5_ib_dev *dev,
head = frame;

bcnt -= frame->bcnt;
+ offset = 0;
}
break;

--
2.19.1




2018-12-14 12:40:24

by Greg Kroah-Hartman

[permalink] [raw]
Subject: [PATCH 4.19 072/142] RDMA/core: Add GIDs while changing MAC addr only for registered ndev

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit d52ef88a9f4be523425730da3239cf87bee936da ]

Currently when MAC address is changed, regardless of the netdev reg_state,
GID entries are removed and added to reflect the new MAC address and new
default GID entries.

When a bonding device is used and the underlying PCI device is removed
several netdevice events are generated. Two events of the interest are
CHANGEADDR and UNREGISTER event on lower(slave) netdevice of the bond
netdevice.

Sometimes CHANGEADDR event is generated when netdev state is
UNREGISTERING (after UNREGISTER event is generated). In this scenario, GID
entries for default GIDs are added and never deleted because GID entries
are deleted only when netdev state is < UNREGISTERED.

This leads to non zero reference count on the netdevice. Due to this, PCI
device unbind operation is getting stuck.

To avoid it, when changing mac address, add GID entries only if netdev is
in REGISTERED state.

Fixes: 03db3a2d81e6 ("IB/core: Add RoCE GID table management")
Signed-off-by: Parav Pandit <[email protected]>
Reviewed-by: Mark Bloch <[email protected]>
Signed-off-by: Leon Romanovsky <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/infiniband/core/roce_gid_mgmt.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/infiniband/core/roce_gid_mgmt.c b/drivers/infiniband/core/roce_gid_mgmt.c
index ee366199b169..25d43c8f1c2a 100644
--- a/drivers/infiniband/core/roce_gid_mgmt.c
+++ b/drivers/infiniband/core/roce_gid_mgmt.c
@@ -767,8 +767,10 @@ static int netdevice_event(struct notifier_block *this, unsigned long event,

case NETDEV_CHANGEADDR:
cmds[0] = netdev_del_cmd;
- cmds[1] = add_default_gid_cmd;
- cmds[2] = add_cmd;
+ if (ndev->reg_state == NETREG_REGISTERED) {
+ cmds[1] = add_default_gid_cmd;
+ cmds[2] = add_cmd;
+ }
break;

case NETDEV_CHANGEUPPER:
--
2.19.1




2018-12-14 12:40:24

by Greg Kroah-Hartman

[permalink] [raw]
Subject: [PATCH 4.19 074/142] RDMA/bnxt_re: Avoid accessing the device structure after it is freed

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit a6c66d6a08b88cc10aca9d3f65cfae31e7652a99 ]

When bnxt_re_ib_reg returns failure, the device structure gets
freed. Driver tries to access the device pointer
after it is freed.

[ 4871.034744] Failed to register with netedev: 0xffffffa1
[ 4871.034765] infiniband (null): Failed to register with IB: 0xffffffea
[ 4871.046430] ==================================================================
[ 4871.046437] BUG: KASAN: use-after-free in bnxt_re_task+0x63/0x180 [bnxt_re]
[ 4871.046439] Write of size 4 at addr ffff880fa8406f48 by task kworker/u48:2/17813

[ 4871.046443] CPU: 20 PID: 17813 Comm: kworker/u48:2 Kdump: loaded Tainted: G B OE 4.20.0-rc1+ #42
[ 4871.046444] Hardware name: Dell Inc. PowerEdge R730/0599V5, BIOS 1.0.4 08/28/2014
[ 4871.046447] Workqueue: bnxt_re bnxt_re_task [bnxt_re]
[ 4871.046449] Call Trace:
[ 4871.046454] dump_stack+0x91/0xeb
[ 4871.046458] print_address_description+0x6a/0x2a0
[ 4871.046461] kasan_report+0x176/0x2d0
[ 4871.046463] ? bnxt_re_task+0x63/0x180 [bnxt_re]
[ 4871.046466] bnxt_re_task+0x63/0x180 [bnxt_re]
[ 4871.046470] process_one_work+0x216/0x5b0
[ 4871.046471] ? process_one_work+0x189/0x5b0
[ 4871.046475] worker_thread+0x4e/0x3d0
[ 4871.046479] kthread+0x10e/0x140
[ 4871.046480] ? process_one_work+0x5b0/0x5b0
[ 4871.046482] ? kthread_stop+0x220/0x220
[ 4871.046486] ret_from_fork+0x3a/0x50

[ 4871.046492] The buggy address belongs to the page:
[ 4871.046494] page:ffffea003ea10180 count:0 mapcount:0 mapping:0000000000000000 index:0x0
[ 4871.046495] flags: 0x57ffffc0000000()
[ 4871.046498] raw: 0057ffffc0000000 0000000000000000 ffffea003ea10188 0000000000000000
[ 4871.046500] raw: 0000000000000000 0000000000000000 00000000ffffffff 0000000000000000
[ 4871.046501] page dumped because: kasan: bad access detected

Avoid accessing the device structure once it is freed.

Fixes: 497158aa5f52 ("RDMA/bnxt_re: Fix the ib_reg failure cleanup")
Signed-off-by: Selvin Xavier <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/infiniband/hw/bnxt_re/main.c | 2 ++
1 file changed, 2 insertions(+)

diff --git a/drivers/infiniband/hw/bnxt_re/main.c b/drivers/infiniband/hw/bnxt_re/main.c
index bb3f16273938..22bd9784fa2e 100644
--- a/drivers/infiniband/hw/bnxt_re/main.c
+++ b/drivers/infiniband/hw/bnxt_re/main.c
@@ -1462,6 +1462,7 @@ static void bnxt_re_task(struct work_struct *work)
"Failed to register with IB: %#x", rc);
bnxt_re_remove_one(rdev);
bnxt_re_dev_unreg(rdev);
+ goto exit;
}
break;
case NETDEV_UP:
@@ -1485,6 +1486,7 @@ static void bnxt_re_task(struct work_struct *work)
}
smp_mb__before_atomic();
atomic_dec(&rdev->sched_count);
+exit:
kfree(re_work);
}

--
2.19.1




2018-12-14 12:40:25

by Greg Kroah-Hartman

[permalink] [raw]
Subject: [PATCH 4.19 071/142] RDMA/mlx5: Fix fence type for IB_WR_LOCAL_INV WR

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit 074fca3a18e7e1e0d4d7dcc9d7badc43b90232f4 ]

Currently, for IB_WR_LOCAL_INV WR, when the next fence is None, the
current fence will be SMALL instead of Normal Fence.

Without this patch krping doesn't work on CX-5 devices and throws
following error:

The error messages are from CX5 driver are: (from server side)
[ 710.434014] mlx5_0:dump_cqe:278:(pid 2712): dump error cqe
[ 710.434016] 00000000 00000000 00000000 00000000
[ 710.434016] 00000000 00000000 00000000 00000000
[ 710.434017] 00000000 00000000 00000000 00000000
[ 710.434018] 00000000 93003204 100000b8 000524d2
[ 710.434019] krping: cq completion failed with wr_id 0 status 4 opcode 128 vender_err 32

Fixed the logic to set the correct fence type.

Fixes: 6e8484c5cf07 ("RDMA/mlx5: set UMR wqe fence according to HCA cap")
Signed-off-by: Majd Dibbiny <[email protected]>
Signed-off-by: Leon Romanovsky <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/infiniband/hw/mlx5/qp.c | 19 ++++++++++---------
1 file changed, 10 insertions(+), 9 deletions(-)

diff --git a/drivers/infiniband/hw/mlx5/qp.c b/drivers/infiniband/hw/mlx5/qp.c
index d53d954ac8af..183fe5c8ceb7 100644
--- a/drivers/infiniband/hw/mlx5/qp.c
+++ b/drivers/infiniband/hw/mlx5/qp.c
@@ -4413,17 +4413,18 @@ static int _mlx5_ib_post_send(struct ib_qp *ibqp, const struct ib_send_wr *wr,
goto out;
}

- if (wr->opcode == IB_WR_LOCAL_INV ||
- wr->opcode == IB_WR_REG_MR) {
+ if (wr->opcode == IB_WR_REG_MR) {
fence = dev->umr_fence;
next_fence = MLX5_FENCE_MODE_INITIATOR_SMALL;
- } else if (wr->send_flags & IB_SEND_FENCE) {
- if (qp->next_fence)
- fence = MLX5_FENCE_MODE_SMALL_AND_FENCE;
- else
- fence = MLX5_FENCE_MODE_FENCE;
- } else {
- fence = qp->next_fence;
+ } else {
+ if (wr->send_flags & IB_SEND_FENCE) {
+ if (qp->next_fence)
+ fence = MLX5_FENCE_MODE_SMALL_AND_FENCE;
+ else
+ fence = MLX5_FENCE_MODE_FENCE;
+ } else {
+ fence = qp->next_fence;
+ }
}

switch (ibqp->qp_type) {
--
2.19.1




2018-12-14 12:40:32

by Greg Kroah-Hartman

[permalink] [raw]
Subject: [PATCH 4.19 091/142] drm/meson: add support for 1080p25 mode

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit 31e1ab494559fb46de304cc6c2aed1528f94b298 ]

This essential mode for PAL users is missing, so add it.

Fixes: 335e3713afb87 ("drm/meson: Add support for HDMI venc modes and settings")
Signed-off-by: Christian Hewitt <[email protected]>
Acked-by: Neil Armstrong <[email protected]>
Signed-off-by: Neil Armstrong <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Sean Paul <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/meson/meson_venc.c | 1 +
1 file changed, 1 insertion(+)

diff --git a/drivers/gpu/drm/meson/meson_venc.c b/drivers/gpu/drm/meson/meson_venc.c
index 14aac661f38b..7a3a6ed9f27b 100644
--- a/drivers/gpu/drm/meson/meson_venc.c
+++ b/drivers/gpu/drm/meson/meson_venc.c
@@ -715,6 +715,7 @@ struct meson_hdmi_venc_vic_mode {
{ 5, &meson_hdmi_encp_mode_1080i60 },
{ 20, &meson_hdmi_encp_mode_1080i50 },
{ 32, &meson_hdmi_encp_mode_1080p24 },
+ { 33, &meson_hdmi_encp_mode_1080p50 },
{ 34, &meson_hdmi_encp_mode_1080p30 },
{ 31, &meson_hdmi_encp_mode_1080p50 },
{ 16, &meson_hdmi_encp_mode_1080p60 },
--
2.19.1




2018-12-14 12:40:35

by Greg Kroah-Hartman

[permalink] [raw]
Subject: [PATCH 4.19 109/142] net: hisilicon: remove unexpected free_netdev

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit c758940158bf29fe14e9d0f89d5848f227b48134 ]

The net device ndev is freed via free_netdev when failing to register
the device. The control flow then jumps to the error handling code
block. ndev is used and freed again. Resulting in a use-after-free bug.

Signed-off-by: Pan Bian <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/hisilicon/hip04_eth.c | 4 +---
1 file changed, 1 insertion(+), 3 deletions(-)

diff --git a/drivers/net/ethernet/hisilicon/hip04_eth.c b/drivers/net/ethernet/hisilicon/hip04_eth.c
index 14374a856d30..6127697ede12 100644
--- a/drivers/net/ethernet/hisilicon/hip04_eth.c
+++ b/drivers/net/ethernet/hisilicon/hip04_eth.c
@@ -914,10 +914,8 @@ static int hip04_mac_probe(struct platform_device *pdev)
}

ret = register_netdev(ndev);
- if (ret) {
- free_netdev(ndev);
+ if (ret)
goto alloc_fail;
- }

return 0;

--
2.19.1




2018-12-14 12:40:43

by Greg Kroah-Hartman

[permalink] [raw]
Subject: [PATCH 4.19 089/142] USB: omap_udc: fix rejection of out transfers when DMA is used

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit 069caf5950dfa75d0526cd89c439ff9d9d3136d8 ]

Commit 387f869d2579 ("usb: gadget: u_ether: conditionally align
transfer size") started aligning transfer size only if requested,
breaking omap_udc DMA mode. Set quirk_ep_out_aligned_size to restore
the old behaviour.

Fixes: 387f869d2579 ("usb: gadget: u_ether: conditionally align transfer size")
Signed-off-by: Aaro Koskinen <[email protected]>
Signed-off-by: Felipe Balbi <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/usb/gadget/udc/omap_udc.c | 1 +
1 file changed, 1 insertion(+)

diff --git a/drivers/usb/gadget/udc/omap_udc.c b/drivers/usb/gadget/udc/omap_udc.c
index 9b23e04c8f02..fcf13ef33b31 100644
--- a/drivers/usb/gadget/udc/omap_udc.c
+++ b/drivers/usb/gadget/udc/omap_udc.c
@@ -2642,6 +2642,7 @@ omap_udc_setup(struct platform_device *odev, struct usb_phy *xceiv)
udc->gadget.speed = USB_SPEED_UNKNOWN;
udc->gadget.max_speed = USB_SPEED_FULL;
udc->gadget.name = driver_name;
+ udc->gadget.quirk_ep_out_aligned_size = 1;
udc->transceiver = xceiv;

/* ep0 is special; put it right after the SETUP buffer */
--
2.19.1




2018-12-14 12:41:07

by Greg Kroah-Hartman

[permalink] [raw]
Subject: [PATCH 4.19 107/142] igb: fix uninitialized variables

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit e4c39f7926b4de355f7df75651d75003806aae09 ]

This patch fixes the variable 'phy_word' may be used uninitialized.

Signed-off-by: Yunjian Wang <[email protected]>
Tested-by: Aaron Brown <[email protected]>
Signed-off-by: Jeff Kirsher <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/intel/igb/e1000_i210.c | 1 +
1 file changed, 1 insertion(+)

diff --git a/drivers/net/ethernet/intel/igb/e1000_i210.c b/drivers/net/ethernet/intel/igb/e1000_i210.c
index c54ebedca6da..c393cb2c0f16 100644
--- a/drivers/net/ethernet/intel/igb/e1000_i210.c
+++ b/drivers/net/ethernet/intel/igb/e1000_i210.c
@@ -842,6 +842,7 @@ s32 igb_pll_workaround_i210(struct e1000_hw *hw)
nvm_word = E1000_INVM_DEFAULT_AL;
tmp_nvm = nvm_word | E1000_INVM_PLL_WO_VAL;
igb_write_phy_reg_82580(hw, I347AT4_PAGE_SELECT, E1000_PHY_PLL_FREQ_PAGE);
+ phy_word = E1000_PHY_PLL_UNCONF;
for (i = 0; i < E1000_MAX_PLL_TRIES; i++) {
/* check current state directly from internal PHY */
igb_read_phy_reg_82580(hw, E1000_PHY_PLL_FREQ_REG, &phy_word);
--
2.19.1




2018-12-14 12:41:07

by Greg Kroah-Hartman

[permalink] [raw]
Subject: [PATCH 4.19 102/142] netfilter: nf_tables: deactivate expressions in rule replecement routine

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit ca08987885a147643817d02bf260bc4756ce8cd4 ]

There is no expression deactivation call from the rule replacement path,
hence, chain counter is not decremented. A few steps to reproduce the
problem:

%nft add table ip filter
%nft add chain ip filter c1
%nft add chain ip filter c1
%nft add rule ip filter c1 jump c2
%nft replace rule ip filter c1 handle 3 accept
%nft flush ruleset

<jump c2> expression means immediate NFT_JUMP to chain c2.
Reference count of chain c2 is increased when the rule is added.

When rule is deleted or replaced, the reference counter of c2 should be
decreased via nft_rule_expr_deactivate() which calls
nft_immediate_deactivate().

Splat looks like:
[ 214.396453] WARNING: CPU: 1 PID: 21 at net/netfilter/nf_tables_api.c:1432 nf_tables_chain_destroy.isra.38+0x2f9/0x3a0 [nf_tables]
[ 214.398983] Modules linked in: nf_tables nfnetlink
[ 214.398983] CPU: 1 PID: 21 Comm: kworker/1:1 Not tainted 4.20.0-rc2+ #44
[ 214.398983] Workqueue: events nf_tables_trans_destroy_work [nf_tables]
[ 214.398983] RIP: 0010:nf_tables_chain_destroy.isra.38+0x2f9/0x3a0 [nf_tables]
[ 214.398983] Code: 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 80 3c 02 00 0f 85 8e 00 00 00 48 8b 7b 58 e8 e1 2c 4e c6 48 89 df e8 d9 2c 4e c6 eb 9a <0f> 0b eb 96 0f 0b e9 7e fe ff ff e8 a7 7e 4e c6 e9 a4 fe ff ff e8
[ 214.398983] RSP: 0018:ffff8881152874e8 EFLAGS: 00010202
[ 214.398983] RAX: 0000000000000001 RBX: ffff88810ef9fc28 RCX: ffff8881152876f0
[ 214.398983] RDX: dffffc0000000000 RSI: 1ffff11022a50ede RDI: ffff88810ef9fc78
[ 214.398983] RBP: 1ffff11022a50e9d R08: 0000000080000000 R09: 0000000000000000
[ 214.398983] R10: 0000000000000000 R11: 0000000000000000 R12: 1ffff11022a50eba
[ 214.398983] R13: ffff888114446e08 R14: ffff8881152876f0 R15: ffffed1022a50ed6
[ 214.398983] FS: 0000000000000000(0000) GS:ffff888116400000(0000) knlGS:0000000000000000
[ 214.398983] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 214.398983] CR2: 00007fab9bb5f868 CR3: 000000012aa16000 CR4: 00000000001006e0
[ 214.398983] Call Trace:
[ 214.398983] ? nf_tables_table_destroy.isra.37+0x100/0x100 [nf_tables]
[ 214.398983] ? __kasan_slab_free+0x145/0x180
[ 214.398983] ? nf_tables_trans_destroy_work+0x439/0x830 [nf_tables]
[ 214.398983] ? kfree+0xdb/0x280
[ 214.398983] nf_tables_trans_destroy_work+0x5f5/0x830 [nf_tables]
[ ... ]

Fixes: bb7b40aecbf7 ("netfilter: nf_tables: bogus EBUSY in chain deletions")
Reported by: Christoph Anton Mitterer <[email protected]>
Link: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=914505
Link: https://bugzilla.kernel.org/show_bug.cgi?id=201791
Signed-off-by: Taehee Yoo <[email protected]>
Signed-off-by: Pablo Neira Ayuso <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/netfilter/nf_tables_api.c | 15 ++++-----------
1 file changed, 4 insertions(+), 11 deletions(-)

diff --git a/net/netfilter/nf_tables_api.c b/net/netfilter/nf_tables_api.c
index 06ed55cef962..fe0558b15fd3 100644
--- a/net/netfilter/nf_tables_api.c
+++ b/net/netfilter/nf_tables_api.c
@@ -2646,21 +2646,14 @@ static int nf_tables_newrule(struct net *net, struct sock *nlsk,
}

if (nlh->nlmsg_flags & NLM_F_REPLACE) {
- if (!nft_is_active_next(net, old_rule)) {
- err = -ENOENT;
- goto err2;
- }
- trans = nft_trans_rule_add(&ctx, NFT_MSG_DELRULE,
- old_rule);
+ trans = nft_trans_rule_add(&ctx, NFT_MSG_NEWRULE, rule);
if (trans == NULL) {
err = -ENOMEM;
goto err2;
}
- nft_deactivate_next(net, old_rule);
- chain->use--;
-
- if (nft_trans_rule_add(&ctx, NFT_MSG_NEWRULE, rule) == NULL) {
- err = -ENOMEM;
+ err = nft_delrule(&ctx, old_rule);
+ if (err < 0) {
+ nft_trans_destroy(trans);
goto err2;
}

--
2.19.1




2018-12-14 12:41:21

by Greg Kroah-Hartman

[permalink] [raw]
Subject: [PATCH 4.19 083/142] fsi: master-ast-cf: select GENERIC_ALLOCATOR

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit 64999fa7aa2c076ec6d05aee481f11f5296ceb8c ]

In randconfig builds without CONFIG_GENERIC_ALLOCATOR, this driver
fails to link:

ERROR: "gen_pool_alloc_algo" [drivers/fsi/fsi-master-ast-cf.ko] undefined!
ERROR: "gen_pool_fixed_alloc" [drivers/fsi/fsi-master-ast-cf.ko] undefined!
ERROR: "of_gen_pool_get" [drivers/fsi/fsi-master-ast-cf.ko] undefined!
ERROR: "gen_pool_free" [drivers/fsi/fsi-master-ast-cf.ko] undefined!

Select the dependency as all other users do.

Fixes: 6a794a27daca ("fsi: master-ast-cf: Add new FSI master using Aspeed ColdFire")
Signed-off-by: Arnd Bergmann <[email protected]>
Signed-off-by: Benjamin Herrenschmidt <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/fsi/Kconfig | 1 +
1 file changed, 1 insertion(+)

diff --git a/drivers/fsi/Kconfig b/drivers/fsi/Kconfig
index af3a20dd5aa4..99c99a5d57fe 100644
--- a/drivers/fsi/Kconfig
+++ b/drivers/fsi/Kconfig
@@ -46,6 +46,7 @@ config FSI_MASTER_AST_CF
tristate "FSI master based on Aspeed ColdFire coprocessor"
depends on GPIOLIB
depends on GPIO_ASPEED
+ select GENERIC_ALLOCATOR
---help---
This option enables a FSI master using the AST2400 and AST2500 GPIO
lines driven by the internal ColdFire coprocessor. This requires
--
2.19.1




2018-12-14 12:41:32

by Greg Kroah-Hartman

[permalink] [raw]
Subject: [PATCH 4.19 069/142] ARM: dts: at91: sama5d2: use the divided clock for SMC

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit 4ab7ca092c3c7ac8b16aa28eba723a8868f82f14 ]

The SAMA5D2 is different from SAMA5D3 and SAMA5D4, as there are two
different clocks for the peripherals in the SoC. The Static Memory
controller is connected to the divided master clock.

Unfortunately, the device tree does not correctly show this and uses the
master clock directly. This clock is then used by the code for the NAND
controller to calculate the timings for the controller, and we end up with
slow NAND Flash access.

Fix the device tree, and the performance of Flash access is improved.

Signed-off-by: Romain Izard <[email protected]>
Signed-off-by: Alexandre Belloni <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm/boot/dts/sama5d2.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/sama5d2.dtsi b/arch/arm/boot/dts/sama5d2.dtsi
index 61f68e5c48e9..b405992eb601 100644
--- a/arch/arm/boot/dts/sama5d2.dtsi
+++ b/arch/arm/boot/dts/sama5d2.dtsi
@@ -308,7 +308,7 @@
0x1 0x0 0x60000000 0x10000000
0x2 0x0 0x70000000 0x10000000
0x3 0x0 0x80000000 0x10000000>;
- clocks = <&mck>;
+ clocks = <&h32ck>;
status = "disabled";

nand_controller: nand-controller {
--
2.19.1




2018-12-14 12:41:47

by Greg Kroah-Hartman

[permalink] [raw]
Subject: [PATCH 4.19 048/142] ASoC: rockchip: add missing slave_config setting for I2S

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit 16a8ee4c80b45984b6de1f90a49edcf336b7c621 ]

This patch adds missing prepare_sleve_config that is needed for
setup the DMA slave channel for I2S.

Signed-off-by: Katsuhiro Suzuki <[email protected]>
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/soc/rockchip/rockchip_pcm.c | 1 +
1 file changed, 1 insertion(+)

diff --git a/sound/soc/rockchip/rockchip_pcm.c b/sound/soc/rockchip/rockchip_pcm.c
index f77538319221..7029e0b85f9e 100644
--- a/sound/soc/rockchip/rockchip_pcm.c
+++ b/sound/soc/rockchip/rockchip_pcm.c
@@ -32,6 +32,7 @@ static const struct snd_pcm_hardware snd_rockchip_hardware = {

static const struct snd_dmaengine_pcm_config rk_dmaengine_pcm_config = {
.pcm_hardware = &snd_rockchip_hardware,
+ .prepare_slave_config = snd_dmaengine_pcm_prepare_slave_config,
.prealloc_buffer_size = 32 * 1024,
};

--
2.19.1




2018-12-14 12:42:02

by Greg Kroah-Hartman

[permalink] [raw]
Subject: [PATCH 4.19 066/142] objtool: Fix segfault in .cold detection with -ffunction-sections

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit 22566c1603030f0a036ad564634b064ad1a55db2 ]

Because find_symbol_by_name() traverses the same lists as
read_symbols(), changing sym->name in place without copying it affects
the result of find_symbol_by_name(). In the case where a ".cold"
function precedes its parent in sec->symbol_list, it can result in a
function being considered a parent of itself. This leads to function
length being set to 0 and other consequent side-effects including a
segfault in add_switch_table(). The effects of this bug are only
visible when building with -ffunction-sections in KCFLAGS.

Fix by copying the search string instead of modifying it in place.

Signed-off-by: Artem Savkov <[email protected]>
Signed-off-by: Josh Poimboeuf <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Fixes: 13810435b9a7 ("objtool: Support GCC 8's cold subfunctions")
Link: http://lkml.kernel.org/r/910abd6b5a4945130fd44f787c24e07b9e07c8da.1542736240.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
tools/objtool/elf.c | 17 ++++++++++++++---
1 file changed, 14 insertions(+), 3 deletions(-)

diff --git a/tools/objtool/elf.c b/tools/objtool/elf.c
index a6f543e0b387..b75d004f6482 100644
--- a/tools/objtool/elf.c
+++ b/tools/objtool/elf.c
@@ -31,6 +31,8 @@
#include "elf.h"
#include "warn.h"

+#define MAX_NAME_LEN 128
+
struct section *find_section_by_name(struct elf *elf, const char *name)
{
struct section *sec;
@@ -298,6 +300,8 @@ static int read_symbols(struct elf *elf)
/* Create parent/child links for any cold subfunctions */
list_for_each_entry(sec, &elf->sections, list) {
list_for_each_entry(sym, &sec->symbol_list, list) {
+ char pname[MAX_NAME_LEN + 1];
+ size_t pnamelen;
if (sym->type != STT_FUNC)
continue;
sym->pfunc = sym->cfunc = sym;
@@ -305,9 +309,16 @@ static int read_symbols(struct elf *elf)
if (!coldstr)
continue;

- coldstr[0] = '\0';
- pfunc = find_symbol_by_name(elf, sym->name);
- coldstr[0] = '.';
+ pnamelen = coldstr - sym->name;
+ if (pnamelen > MAX_NAME_LEN) {
+ WARN("%s(): parent function name exceeds maximum length of %d characters",
+ sym->name, MAX_NAME_LEN);
+ return -1;
+ }
+
+ strncpy(pname, sym->name, pnamelen);
+ pname[pnamelen] = '\0';
+ pfunc = find_symbol_by_name(elf, pname);

if (!pfunc) {
WARN("%s(): can't find parent function",
--
2.19.1




2018-12-14 12:42:07

by Greg Kroah-Hartman

[permalink] [raw]
Subject: [PATCH 4.19 085/142] USB: omap_udc: use devm_request_irq()

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit 286afdde1640d8ea8916a0f05e811441fbbf4b9d ]

The current code fails to release the third irq on the error path
(observed by reading the code), and we get also multiple WARNs with
failing gadget drivers due to duplicate IRQ releases. Fix by using
devm_request_irq().

Signed-off-by: Aaro Koskinen <[email protected]>
Signed-off-by: Felipe Balbi <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/usb/gadget/udc/omap_udc.c | 37 +++++++++----------------------
1 file changed, 10 insertions(+), 27 deletions(-)

diff --git a/drivers/usb/gadget/udc/omap_udc.c b/drivers/usb/gadget/udc/omap_udc.c
index 3a16431da321..1c77218c82af 100644
--- a/drivers/usb/gadget/udc/omap_udc.c
+++ b/drivers/usb/gadget/udc/omap_udc.c
@@ -2867,8 +2867,8 @@ static int omap_udc_probe(struct platform_device *pdev)
udc->clr_halt = UDC_RESET_EP;

/* USB general purpose IRQ: ep0, state changes, dma, etc */
- status = request_irq(pdev->resource[1].start, omap_udc_irq,
- 0, driver_name, udc);
+ status = devm_request_irq(&pdev->dev, pdev->resource[1].start,
+ omap_udc_irq, 0, driver_name, udc);
if (status != 0) {
ERR("can't get irq %d, err %d\n",
(int) pdev->resource[1].start, status);
@@ -2876,20 +2876,20 @@ static int omap_udc_probe(struct platform_device *pdev)
}

/* USB "non-iso" IRQ (PIO for all but ep0) */
- status = request_irq(pdev->resource[2].start, omap_udc_pio_irq,
- 0, "omap_udc pio", udc);
+ status = devm_request_irq(&pdev->dev, pdev->resource[2].start,
+ omap_udc_pio_irq, 0, "omap_udc pio", udc);
if (status != 0) {
ERR("can't get irq %d, err %d\n",
(int) pdev->resource[2].start, status);
- goto cleanup2;
+ goto cleanup1;
}
#ifdef USE_ISO
- status = request_irq(pdev->resource[3].start, omap_udc_iso_irq,
- 0, "omap_udc iso", udc);
+ status = devm_request_irq(&pdev->dev, pdev->resource[3].start,
+ omap_udc_iso_irq, 0, "omap_udc iso", udc);
if (status != 0) {
ERR("can't get irq %d, err %d\n",
(int) pdev->resource[3].start, status);
- goto cleanup3;
+ goto cleanup1;
}
#endif
if (cpu_is_omap16xx() || cpu_is_omap7xx()) {
@@ -2902,22 +2902,11 @@ static int omap_udc_probe(struct platform_device *pdev)
create_proc_file();
status = usb_add_gadget_udc_release(&pdev->dev, &udc->gadget,
omap_udc_release);
- if (status)
- goto cleanup4;
-
- return 0;
+ if (!status)
+ return 0;

-cleanup4:
remove_proc_file();

-#ifdef USE_ISO
-cleanup3:
- free_irq(pdev->resource[2].start, udc);
-#endif
-
-cleanup2:
- free_irq(pdev->resource[1].start, udc);
-
cleanup1:
kfree(udc);
udc = NULL;
@@ -2961,12 +2950,6 @@ static int omap_udc_remove(struct platform_device *pdev)

remove_proc_file();

-#ifdef USE_ISO
- free_irq(pdev->resource[3].start, udc);
-#endif
- free_irq(pdev->resource[2].start, udc);
- free_irq(pdev->resource[1].start, udc);
-
if (udc->dc_clk) {
if (udc->clk_requested)
omap_udc_enable_clock(0);
--
2.19.1




2018-12-14 12:42:08

by Greg Kroah-Hartman

[permalink] [raw]
Subject: [PATCH 4.19 064/142] ASoC: acpi: fix: continue searching when machine is ignored

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit a3e620f8422832afd832ad5e20aa97d0c72bada8 ]

The machine_quirk may return NULL which means the acpi entries should be
skipped and search for next matched entry is needed, here add return
check here and continue for NULL case.

Signed-off-by: Keyon Jie <[email protected]>
Signed-off-by: Pierre-Louis Bossart <[email protected]>
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/soc/soc-acpi.c | 10 ++++++++--
1 file changed, 8 insertions(+), 2 deletions(-)

diff --git a/sound/soc/soc-acpi.c b/sound/soc/soc-acpi.c
index b8e72b52db30..4fb29f0e561e 100644
--- a/sound/soc/soc-acpi.c
+++ b/sound/soc/soc-acpi.c
@@ -10,11 +10,17 @@ struct snd_soc_acpi_mach *
snd_soc_acpi_find_machine(struct snd_soc_acpi_mach *machines)
{
struct snd_soc_acpi_mach *mach;
+ struct snd_soc_acpi_mach *mach_alt;

for (mach = machines; mach->id[0]; mach++) {
if (acpi_dev_present(mach->id, NULL, -1)) {
- if (mach->machine_quirk)
- mach = mach->machine_quirk(mach);
+ if (mach->machine_quirk) {
+ mach_alt = mach->machine_quirk(mach);
+ if (!mach_alt)
+ continue; /* not full match, ignore */
+ mach = mach_alt;
+ }
+
return mach;
}
}
--
2.19.1




2018-12-14 12:42:10

by Greg Kroah-Hartman

[permalink] [raw]
Subject: [PATCH 4.19 063/142] PCI: imx6: Fix link training status detection in link up check

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit 68bc10bf992180f269816ff3d22eb30383138577 ]

This bug was introduced in the interaction for two commits on either
branch of the merge commit 562df5c8521e ("Merge branch
'pci/host-designware' into next").

Commit 4d107d3b5a68 ("PCI: imx6: Move link up check into
imx6_pcie_wait_for_link()"), changed imx6_pcie_wait_for_link() to poll
the link status register directly, checking for link up and not
training, and made imx6_pcie_link_up() only check the link up bit (once,
not a polling loop).

While commit 886bc5ceb5cc ("PCI: designware: Add generic
dw_pcie_wait_for_link()"), replaced the loop in
imx6_pcie_wait_for_link() with a call to a new dwc core function, which
polled imx6_pcie_link_up(), which still checked both link up and not
training in a loop.

When these two commits were merged, the version of
imx6_pcie_wait_for_link() from 886bc5ceb5cc was kept, which eliminated
the link training check placed there by 4d107d3b5a68. However, the
version of imx6_pcie_link_up() from 4d107d3b5a68 was kept, which
eliminated the link training check that had been there and was moved to
imx6_pcie_wait_for_link().

The result was the link training check got lost for the imx6 driver.

Eliminate imx6_pcie_link_up() so that the default handler,
dw_pcie_link_up(), is used instead. The default handler has the correct
code, which checks for link up and also that it still is not training,
fixing the regression.

Fixes: 562df5c8521e ("Merge branch 'pci/host-designware' into next")
Signed-off-by: Trent Piepho <[email protected]>
[[email protected]: rewrote the commit log]
Signed-off-by: Lorenzo Pieralisi <[email protected]>
Reviewed-by: Lucas Stach <[email protected]>
Cc: Bjorn Helgaas <[email protected]>
Cc: Joao Pinto <[email protected]>
Cc: Lorenzo Pieralisi <[email protected]>
Cc: Richard Zhu <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/pci/controller/dwc/pci-imx6.c | 10 +---------
1 file changed, 1 insertion(+), 9 deletions(-)

diff --git a/drivers/pci/controller/dwc/pci-imx6.c b/drivers/pci/controller/dwc/pci-imx6.c
index 4a9a673b4777..975050a69494 100644
--- a/drivers/pci/controller/dwc/pci-imx6.c
+++ b/drivers/pci/controller/dwc/pci-imx6.c
@@ -80,8 +80,6 @@ struct imx6_pcie {
#define PCIE_PL_PFLR_FORCE_LINK (1 << 15)
#define PCIE_PHY_DEBUG_R0 (PL_OFFSET + 0x28)
#define PCIE_PHY_DEBUG_R1 (PL_OFFSET + 0x2c)
-#define PCIE_PHY_DEBUG_R1_XMLH_LINK_IN_TRAINING (1 << 29)
-#define PCIE_PHY_DEBUG_R1_XMLH_LINK_UP (1 << 4)

#define PCIE_PHY_CTRL (PL_OFFSET + 0x114)
#define PCIE_PHY_CTRL_DATA_LOC 0
@@ -641,12 +639,6 @@ static int imx6_pcie_host_init(struct pcie_port *pp)
return 0;
}

-static int imx6_pcie_link_up(struct dw_pcie *pci)
-{
- return dw_pcie_readl_dbi(pci, PCIE_PHY_DEBUG_R1) &
- PCIE_PHY_DEBUG_R1_XMLH_LINK_UP;
-}
-
static const struct dw_pcie_host_ops imx6_pcie_host_ops = {
.host_init = imx6_pcie_host_init,
};
@@ -679,7 +671,7 @@ static int imx6_add_pcie_port(struct imx6_pcie *imx6_pcie,
}

static const struct dw_pcie_ops dw_pcie_ops = {
- .link_up = imx6_pcie_link_up,
+ /* No special ops needed, but pcie-designware still expects this struct */
};

static int imx6_pcie_probe(struct platform_device *pdev)
--
2.19.1




2018-12-14 12:42:23

by Greg Kroah-Hartman

[permalink] [raw]
Subject: [PATCH 4.19 044/142] s390/cio: Fix cleanup of pfn_array alloc failure

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit 806212f91c874b24cf9eb4a9f180323671b6c5ed ]

If pfn_array_alloc fails somehow, we need to release the pfn_array_table
that was malloc'd earlier.

Signed-off-by: Eric Farman <[email protected]>
Message-Id: <[email protected]>
Acked-by: Halil Pasic <[email protected]>
Signed-off-by: Cornelia Huck <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/s390/cio/vfio_ccw_cp.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/s390/cio/vfio_ccw_cp.c b/drivers/s390/cio/vfio_ccw_cp.c
index fd77e46eb3b2..ef5ab45d94b3 100644
--- a/drivers/s390/cio/vfio_ccw_cp.c
+++ b/drivers/s390/cio/vfio_ccw_cp.c
@@ -528,7 +528,7 @@ static int ccwchain_fetch_direct(struct ccwchain *chain,

ret = pfn_array_alloc_pin(pat->pat_pa, cp->mdev, ccw->cda, ccw->count);
if (ret < 0)
- goto out_init;
+ goto out_unpin;

/* Translate this direct ccw to a idal ccw. */
idaws = kcalloc(ret, sizeof(*idaws), GFP_DMA | GFP_KERNEL);
--
2.19.1




2018-12-14 12:42:25

by Greg Kroah-Hartman

[permalink] [raw]
Subject: [PATCH 4.19 060/142] netfilter: xt_hashlimit: fix a possible memory leak in htable_create()

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit b4e955e9f372035361fbc6f07b21fe2cc6a5be4a ]

In the htable_create(), hinfo is allocated by vmalloc()
So that if error occurred, hinfo should be freed.

Fixes: 11d5f15723c9 ("netfilter: xt_hashlimit: Create revision 2 to support higher pps rates")
Signed-off-by: Taehee Yoo <[email protected]>
Signed-off-by: Pablo Neira Ayuso <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/netfilter/xt_hashlimit.c | 9 +++------
1 file changed, 3 insertions(+), 6 deletions(-)

diff --git a/net/netfilter/xt_hashlimit.c b/net/netfilter/xt_hashlimit.c
index 3e7d259e5d8d..1ad4017f9b73 100644
--- a/net/netfilter/xt_hashlimit.c
+++ b/net/netfilter/xt_hashlimit.c
@@ -295,9 +295,10 @@ static int htable_create(struct net *net, struct hashlimit_cfg3 *cfg,

/* copy match config into hashtable config */
ret = cfg_copy(&hinfo->cfg, (void *)cfg, 3);
-
- if (ret)
+ if (ret) {
+ vfree(hinfo);
return ret;
+ }

hinfo->cfg.size = size;
if (hinfo->cfg.max == 0)
@@ -814,7 +815,6 @@ hashlimit_mt_v1(const struct sk_buff *skb, struct xt_action_param *par)
int ret;

ret = cfg_copy(&cfg, (void *)&info->cfg, 1);
-
if (ret)
return ret;

@@ -830,7 +830,6 @@ hashlimit_mt_v2(const struct sk_buff *skb, struct xt_action_param *par)
int ret;

ret = cfg_copy(&cfg, (void *)&info->cfg, 2);
-
if (ret)
return ret;

@@ -921,7 +920,6 @@ static int hashlimit_mt_check_v1(const struct xt_mtchk_param *par)
return ret;

ret = cfg_copy(&cfg, (void *)&info->cfg, 1);
-
if (ret)
return ret;

@@ -940,7 +938,6 @@ static int hashlimit_mt_check_v2(const struct xt_mtchk_param *par)
return ret;

ret = cfg_copy(&cfg, (void *)&info->cfg, 2);
-
if (ret)
return ret;

--
2.19.1




2018-12-14 12:42:26

by Greg Kroah-Hartman

[permalink] [raw]
Subject: [PATCH 4.19 081/142] RDMA/hns: Bugfix pbl configuration for rereg mr

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit ca088320a02537f36c243ac21794525d8eabb3bd ]

Current hns driver assigned the first two PBL page addresses from previous
registered MR to the hardware when reregister MR changing the memory
locations occurred. This will lead to PBL addressing error as the PBL has
already been released. This patch fixes this wrong assignment by using the
page address from new allocated PBL.

Fixes: a2c80b7b4119 ("RDMA/hns: Add rereg mr support for hip08")
Signed-off-by: Yixian Liu <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/infiniband/hw/hns/hns_roce_hw_v2.c | 128 ++++++++++-----------
1 file changed, 60 insertions(+), 68 deletions(-)

diff --git a/drivers/infiniband/hw/hns/hns_roce_hw_v2.c b/drivers/infiniband/hw/hns/hns_roce_hw_v2.c
index 0218c0f8c2a7..a442b29e7611 100644
--- a/drivers/infiniband/hw/hns/hns_roce_hw_v2.c
+++ b/drivers/infiniband/hw/hns/hns_roce_hw_v2.c
@@ -1661,10 +1661,9 @@ static int hns_roce_v2_set_mac(struct hns_roce_dev *hr_dev, u8 phy_port,
return hns_roce_cmq_send(hr_dev, &desc, 1);
}

-static int hns_roce_v2_write_mtpt(void *mb_buf, struct hns_roce_mr *mr,
- unsigned long mtpt_idx)
+static int set_mtpt_pbl(struct hns_roce_v2_mpt_entry *mpt_entry,
+ struct hns_roce_mr *mr)
{
- struct hns_roce_v2_mpt_entry *mpt_entry;
struct scatterlist *sg;
u64 page_addr;
u64 *pages;
@@ -1672,6 +1671,53 @@ static int hns_roce_v2_write_mtpt(void *mb_buf, struct hns_roce_mr *mr,
int len;
int entry;

+ mpt_entry->pbl_size = cpu_to_le32(mr->pbl_size);
+ mpt_entry->pbl_ba_l = cpu_to_le32(lower_32_bits(mr->pbl_ba >> 3));
+ roce_set_field(mpt_entry->byte_48_mode_ba,
+ V2_MPT_BYTE_48_PBL_BA_H_M, V2_MPT_BYTE_48_PBL_BA_H_S,
+ upper_32_bits(mr->pbl_ba >> 3));
+
+ pages = (u64 *)__get_free_page(GFP_KERNEL);
+ if (!pages)
+ return -ENOMEM;
+
+ i = 0;
+ for_each_sg(mr->umem->sg_head.sgl, sg, mr->umem->nmap, entry) {
+ len = sg_dma_len(sg) >> PAGE_SHIFT;
+ for (j = 0; j < len; ++j) {
+ page_addr = sg_dma_address(sg) +
+ (j << mr->umem->page_shift);
+ pages[i] = page_addr >> 6;
+ /* Record the first 2 entry directly to MTPT table */
+ if (i >= HNS_ROCE_V2_MAX_INNER_MTPT_NUM - 1)
+ goto found;
+ i++;
+ }
+ }
+found:
+ mpt_entry->pa0_l = cpu_to_le32(lower_32_bits(pages[0]));
+ roce_set_field(mpt_entry->byte_56_pa0_h, V2_MPT_BYTE_56_PA0_H_M,
+ V2_MPT_BYTE_56_PA0_H_S, upper_32_bits(pages[0]));
+
+ mpt_entry->pa1_l = cpu_to_le32(lower_32_bits(pages[1]));
+ roce_set_field(mpt_entry->byte_64_buf_pa1, V2_MPT_BYTE_64_PA1_H_M,
+ V2_MPT_BYTE_64_PA1_H_S, upper_32_bits(pages[1]));
+ roce_set_field(mpt_entry->byte_64_buf_pa1,
+ V2_MPT_BYTE_64_PBL_BUF_PG_SZ_M,
+ V2_MPT_BYTE_64_PBL_BUF_PG_SZ_S,
+ mr->pbl_buf_pg_sz + PG_SHIFT_OFFSET);
+
+ free_page((unsigned long)pages);
+
+ return 0;
+}
+
+static int hns_roce_v2_write_mtpt(void *mb_buf, struct hns_roce_mr *mr,
+ unsigned long mtpt_idx)
+{
+ struct hns_roce_v2_mpt_entry *mpt_entry;
+ int ret;
+
mpt_entry = mb_buf;
memset(mpt_entry, 0, sizeof(*mpt_entry));

@@ -1686,7 +1732,6 @@ static int hns_roce_v2_write_mtpt(void *mb_buf, struct hns_roce_mr *mr,
mr->pbl_ba_pg_sz + PG_SHIFT_OFFSET);
roce_set_field(mpt_entry->byte_4_pd_hop_st, V2_MPT_BYTE_4_PD_M,
V2_MPT_BYTE_4_PD_S, mr->pd);
- mpt_entry->byte_4_pd_hop_st = cpu_to_le32(mpt_entry->byte_4_pd_hop_st);

roce_set_bit(mpt_entry->byte_8_mw_cnt_en, V2_MPT_BYTE_8_RA_EN_S, 0);
roce_set_bit(mpt_entry->byte_8_mw_cnt_en, V2_MPT_BYTE_8_R_INV_EN_S, 1);
@@ -1700,13 +1745,11 @@ static int hns_roce_v2_write_mtpt(void *mb_buf, struct hns_roce_mr *mr,
(mr->access & IB_ACCESS_REMOTE_WRITE ? 1 : 0));
roce_set_bit(mpt_entry->byte_8_mw_cnt_en, V2_MPT_BYTE_8_LW_EN_S,
(mr->access & IB_ACCESS_LOCAL_WRITE ? 1 : 0));
- mpt_entry->byte_8_mw_cnt_en = cpu_to_le32(mpt_entry->byte_8_mw_cnt_en);

roce_set_bit(mpt_entry->byte_12_mw_pa, V2_MPT_BYTE_12_PA_S,
mr->type == MR_TYPE_MR ? 0 : 1);
roce_set_bit(mpt_entry->byte_12_mw_pa, V2_MPT_BYTE_12_INNER_PA_VLD_S,
1);
- mpt_entry->byte_12_mw_pa = cpu_to_le32(mpt_entry->byte_12_mw_pa);

mpt_entry->len_l = cpu_to_le32(lower_32_bits(mr->size));
mpt_entry->len_h = cpu_to_le32(upper_32_bits(mr->size));
@@ -1717,53 +1760,9 @@ static int hns_roce_v2_write_mtpt(void *mb_buf, struct hns_roce_mr *mr,
if (mr->type == MR_TYPE_DMA)
return 0;

- mpt_entry->pbl_size = cpu_to_le32(mr->pbl_size);
-
- mpt_entry->pbl_ba_l = cpu_to_le32(lower_32_bits(mr->pbl_ba >> 3));
- roce_set_field(mpt_entry->byte_48_mode_ba, V2_MPT_BYTE_48_PBL_BA_H_M,
- V2_MPT_BYTE_48_PBL_BA_H_S,
- upper_32_bits(mr->pbl_ba >> 3));
- mpt_entry->byte_48_mode_ba = cpu_to_le32(mpt_entry->byte_48_mode_ba);
-
- pages = (u64 *)__get_free_page(GFP_KERNEL);
- if (!pages)
- return -ENOMEM;
-
- i = 0;
- for_each_sg(mr->umem->sg_head.sgl, sg, mr->umem->nmap, entry) {
- len = sg_dma_len(sg) >> PAGE_SHIFT;
- for (j = 0; j < len; ++j) {
- page_addr = sg_dma_address(sg) +
- (j << mr->umem->page_shift);
- pages[i] = page_addr >> 6;
-
- /* Record the first 2 entry directly to MTPT table */
- if (i >= HNS_ROCE_V2_MAX_INNER_MTPT_NUM - 1)
- goto found;
- i++;
- }
- }
+ ret = set_mtpt_pbl(mpt_entry, mr);

-found:
- mpt_entry->pa0_l = cpu_to_le32(lower_32_bits(pages[0]));
- roce_set_field(mpt_entry->byte_56_pa0_h, V2_MPT_BYTE_56_PA0_H_M,
- V2_MPT_BYTE_56_PA0_H_S,
- upper_32_bits(pages[0]));
- mpt_entry->byte_56_pa0_h = cpu_to_le32(mpt_entry->byte_56_pa0_h);
-
- mpt_entry->pa1_l = cpu_to_le32(lower_32_bits(pages[1]));
- roce_set_field(mpt_entry->byte_64_buf_pa1, V2_MPT_BYTE_64_PA1_H_M,
- V2_MPT_BYTE_64_PA1_H_S, upper_32_bits(pages[1]));
-
- free_page((unsigned long)pages);
-
- roce_set_field(mpt_entry->byte_64_buf_pa1,
- V2_MPT_BYTE_64_PBL_BUF_PG_SZ_M,
- V2_MPT_BYTE_64_PBL_BUF_PG_SZ_S,
- mr->pbl_buf_pg_sz + PG_SHIFT_OFFSET);
- mpt_entry->byte_64_buf_pa1 = cpu_to_le32(mpt_entry->byte_64_buf_pa1);
-
- return 0;
+ return ret;
}

static int hns_roce_v2_rereg_write_mtpt(struct hns_roce_dev *hr_dev,
@@ -1772,6 +1771,7 @@ static int hns_roce_v2_rereg_write_mtpt(struct hns_roce_dev *hr_dev,
u64 size, void *mb_buf)
{
struct hns_roce_v2_mpt_entry *mpt_entry = mb_buf;
+ int ret = 0;

if (flags & IB_MR_REREG_PD) {
roce_set_field(mpt_entry->byte_4_pd_hop_st, V2_MPT_BYTE_4_PD_M,
@@ -1784,14 +1784,14 @@ static int hns_roce_v2_rereg_write_mtpt(struct hns_roce_dev *hr_dev,
V2_MPT_BYTE_8_BIND_EN_S,
(mr_access_flags & IB_ACCESS_MW_BIND ? 1 : 0));
roce_set_bit(mpt_entry->byte_8_mw_cnt_en,
- V2_MPT_BYTE_8_ATOMIC_EN_S,
- (mr_access_flags & IB_ACCESS_REMOTE_ATOMIC ? 1 : 0));
+ V2_MPT_BYTE_8_ATOMIC_EN_S,
+ mr_access_flags & IB_ACCESS_REMOTE_ATOMIC ? 1 : 0);
roce_set_bit(mpt_entry->byte_8_mw_cnt_en, V2_MPT_BYTE_8_RR_EN_S,
- (mr_access_flags & IB_ACCESS_REMOTE_READ ? 1 : 0));
+ mr_access_flags & IB_ACCESS_REMOTE_READ ? 1 : 0);
roce_set_bit(mpt_entry->byte_8_mw_cnt_en, V2_MPT_BYTE_8_RW_EN_S,
- (mr_access_flags & IB_ACCESS_REMOTE_WRITE ? 1 : 0));
+ mr_access_flags & IB_ACCESS_REMOTE_WRITE ? 1 : 0);
roce_set_bit(mpt_entry->byte_8_mw_cnt_en, V2_MPT_BYTE_8_LW_EN_S,
- (mr_access_flags & IB_ACCESS_LOCAL_WRITE ? 1 : 0));
+ mr_access_flags & IB_ACCESS_LOCAL_WRITE ? 1 : 0);
}

if (flags & IB_MR_REREG_TRANS) {
@@ -1800,21 +1800,13 @@ static int hns_roce_v2_rereg_write_mtpt(struct hns_roce_dev *hr_dev,
mpt_entry->len_l = cpu_to_le32(lower_32_bits(size));
mpt_entry->len_h = cpu_to_le32(upper_32_bits(size));

- mpt_entry->pbl_size = cpu_to_le32(mr->pbl_size);
- mpt_entry->pbl_ba_l =
- cpu_to_le32(lower_32_bits(mr->pbl_ba >> 3));
- roce_set_field(mpt_entry->byte_48_mode_ba,
- V2_MPT_BYTE_48_PBL_BA_H_M,
- V2_MPT_BYTE_48_PBL_BA_H_S,
- upper_32_bits(mr->pbl_ba >> 3));
- mpt_entry->byte_48_mode_ba =
- cpu_to_le32(mpt_entry->byte_48_mode_ba);
-
mr->iova = iova;
mr->size = size;
+
+ ret = set_mtpt_pbl(mpt_entry, mr);
}

- return 0;
+ return ret;
}

static void *get_cqe_v2(struct hns_roce_cq *hr_cq, int n)
--
2.19.1




2018-12-14 12:42:27

by Greg Kroah-Hartman

[permalink] [raw]
Subject: [PATCH 4.19 061/142] hwmon: (w83795) temp4_type has writable permission

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit 09aaf6813cfca4c18034fda7a43e68763f34abb1 ]

Both datasheet and comments of store_temp_mode() tell us that temp1~4_type
is writable, so fix it.

Signed-off-by: Yao Wang <[email protected]>
Signed-off-by: Huacai Chen <[email protected]>
Fixes: 39deb6993e7c (" hwmon: (w83795) Simplify temperature sensor type handling")
Signed-off-by: Guenter Roeck <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/hwmon/w83795.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/hwmon/w83795.c b/drivers/hwmon/w83795.c
index 49276bbdac3d..1bb80f992aa8 100644
--- a/drivers/hwmon/w83795.c
+++ b/drivers/hwmon/w83795.c
@@ -1691,7 +1691,7 @@ store_sf_setup(struct device *dev, struct device_attribute *attr,
* somewhere else in the code
*/
#define SENSOR_ATTR_TEMP(index) { \
- SENSOR_ATTR_2(temp##index##_type, S_IRUGO | (index < 4 ? S_IWUSR : 0), \
+ SENSOR_ATTR_2(temp##index##_type, S_IRUGO | (index < 5 ? S_IWUSR : 0), \
show_temp_mode, store_temp_mode, NOT_USED, index - 1), \
SENSOR_ATTR_2(temp##index##_input, S_IRUGO, show_temp, \
NULL, TEMP_READ, index - 1), \
--
2.19.1




2018-12-14 12:42:33

by Greg Kroah-Hartman

[permalink] [raw]
Subject: [PATCH 4.19 077/142] ASoC: omap-mcbsp: Fix latency value calculation for pm_qos

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit dd2f52d8991af9fe0928d59ec502ba52be7bc38d ]

The latency number is in usec for the pm_qos. Correct the calculation to
give us the time in usec

Signed-off-by: Peter Ujfalusi <[email protected]>
Acked-by: Jarkko Nikula <[email protected]>
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/soc/omap/omap-mcbsp.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/sound/soc/omap/omap-mcbsp.c b/sound/soc/omap/omap-mcbsp.c
index d0ebb6b9bfac..2d6decbfc99e 100644
--- a/sound/soc/omap/omap-mcbsp.c
+++ b/sound/soc/omap/omap-mcbsp.c
@@ -308,9 +308,9 @@ static int omap_mcbsp_dai_hw_params(struct snd_pcm_substream *substream,
pkt_size = channels;
}

- latency = ((((buffer_size - pkt_size) / channels) * 1000)
- / (params->rate_num / params->rate_den));
-
+ latency = (buffer_size - pkt_size) / channels;
+ latency = latency * USEC_PER_SEC /
+ (params->rate_num / params->rate_den);
mcbsp->latency[substream->stream] = latency;

omap_mcbsp_set_threshold(substream, pkt_size);
--
2.19.1




2018-12-14 12:42:33

by Greg Kroah-Hartman

[permalink] [raw]
Subject: [PATCH 4.19 057/142] hwmon: (mlxreg-fan) Fix macros for tacho fault reading

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit 243cfe3fb8978c7eec24511aba7dac98819ed896 ]

Fix macros for tacometer fault reading.
This fix is relevant for three Mellanox systems MQMB7, MSN37, MSN34,
which are about to be released to the customers.
At the moment, none of them is at customers sites.

Fixes: 65afb4c8e7e4 ("hwmon: (mlxreg-fan) Add support for Mellanox FAN driver")
Signed-off-by: Vadim Pasternak <[email protected]>
Signed-off-by: Guenter Roeck <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/hwmon/mlxreg-fan.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/hwmon/mlxreg-fan.c b/drivers/hwmon/mlxreg-fan.c
index de46577c7d5a..d8fa4bea4bc8 100644
--- a/drivers/hwmon/mlxreg-fan.c
+++ b/drivers/hwmon/mlxreg-fan.c
@@ -51,7 +51,7 @@
*/
#define MLXREG_FAN_GET_RPM(rval, d, s) (DIV_ROUND_CLOSEST(15000000 * 100, \
((rval) + (s)) * (d)))
-#define MLXREG_FAN_GET_FAULT(val, mask) (!!((val) ^ (mask)))
+#define MLXREG_FAN_GET_FAULT(val, mask) (!((val) ^ (mask)))
#define MLXREG_FAN_PWM_DUTY2STATE(duty) (DIV_ROUND_CLOSEST((duty) * \
MLXREG_FAN_MAX_STATE, \
MLXREG_FAN_MAX_DUTY))
--
2.19.1




2018-12-14 12:42:43

by Greg Kroah-Hartman

[permalink] [raw]
Subject: [PATCH 4.19 042/142] netfilter: xt_RATEEST: remove netns exit routine

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit 0fbcc5b568edab7d848b7c7fa66d44ffbd4133c0 ]

xt_rateest_net_exit() was added to check whether rules are flushed
successfully. but ->net_exit() callback is called earlier than
->destroy() callback.
So that ->net_exit() callback can't check that.

test commands:
%ip netns add vm1
%ip netns exec vm1 iptables -t mangle -I PREROUTING -p udp \
--dport 1111 -j RATEEST --rateest-name ap \
--rateest-interval 250ms --rateest-ewma 0.5s
%ip netns del vm1

splat looks like:
[ 668.813518] WARNING: CPU: 0 PID: 87 at net/netfilter/xt_RATEEST.c:210 xt_rateest_net_exit+0x210/0x340 [xt_RATEEST]
[ 668.813518] Modules linked in: xt_RATEEST xt_tcpudp iptable_mangle bpfilter ip_tables x_tables
[ 668.813518] CPU: 0 PID: 87 Comm: kworker/u4:2 Not tainted 4.19.0-rc7+ #21
[ 668.813518] Workqueue: netns cleanup_net
[ 668.813518] RIP: 0010:xt_rateest_net_exit+0x210/0x340 [xt_RATEEST]
[ 668.813518] Code: 00 48 8b 85 30 ff ff ff 4c 8b 23 80 38 00 0f 85 24 01 00 00 48 8b 85 30 ff ff ff 4d 85 e4 4c 89 a5 58 ff ff ff c6 00 f8 74 b2 <0f> 0b 48 83 c3 08 4c 39 f3 75 b0 48 b8 00 00 00 00 00 fc ff df 49
[ 668.813518] RSP: 0018:ffff8801156c73f8 EFLAGS: 00010282
[ 668.813518] RAX: ffffed0022ad8e85 RBX: ffff880118928e98 RCX: 5db8012a00000000
[ 668.813518] RDX: ffff8801156c7428 RSI: 00000000cb1d185f RDI: ffff880115663b74
[ 668.813518] RBP: ffff8801156c74d0 R08: ffff8801156633c0 R09: 1ffff100236440be
[ 668.813518] R10: 0000000000000001 R11: ffffed002367d852 R12: ffff880115142b08
[ 668.813518] R13: 1ffff10022ad8e81 R14: ffff880118928ea8 R15: dffffc0000000000
[ 668.813518] FS: 0000000000000000(0000) GS:ffff88011b200000(0000) knlGS:0000000000000000
[ 668.813518] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 668.813518] CR2: 0000563aa69f4f28 CR3: 0000000105a16000 CR4: 00000000001006f0
[ 668.813518] Call Trace:
[ 668.813518] ? unregister_netdevice_many+0xe0/0xe0
[ 668.813518] ? xt_rateest_net_init+0x2c0/0x2c0 [xt_RATEEST]
[ 668.813518] ? default_device_exit+0x1ca/0x270
[ 668.813518] ? remove_proc_entry+0x1cd/0x390
[ 668.813518] ? dev_change_net_namespace+0xd00/0xd00
[ 668.813518] ? __init_waitqueue_head+0x130/0x130
[ 668.813518] ops_exit_list.isra.10+0x94/0x140
[ 668.813518] cleanup_net+0x45b/0x900
[ 668.813518] ? net_drop_ns+0x110/0x110
[ 668.813518] ? swapgs_restore_regs_and_return_to_usermode+0x3c/0x80
[ 668.813518] ? save_trace+0x300/0x300
[ 668.813518] ? lock_acquire+0x196/0x470
[ 668.813518] ? lock_acquire+0x196/0x470
[ 668.813518] ? process_one_work+0xb60/0x1de0
[ 668.813518] ? _raw_spin_unlock_irq+0x29/0x40
[ 668.813518] ? _raw_spin_unlock_irq+0x29/0x40
[ 668.813518] ? __lock_acquire+0x4500/0x4500
[ 668.813518] ? __lock_is_held+0xb4/0x140
[ 668.813518] process_one_work+0xc13/0x1de0
[ 668.813518] ? pwq_dec_nr_in_flight+0x3c0/0x3c0
[ 668.813518] ? set_load_weight+0x270/0x270
[ ... ]

Fixes: 3427b2ab63fa ("netfilter: make xt_rateest hash table per net")
Signed-off-by: Taehee Yoo <[email protected]>
Signed-off-by: Pablo Neira Ayuso <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/netfilter/xt_RATEEST.c | 10 ----------
1 file changed, 10 deletions(-)

diff --git a/net/netfilter/xt_RATEEST.c b/net/netfilter/xt_RATEEST.c
index dec843cadf46..9e05c86ba5c4 100644
--- a/net/netfilter/xt_RATEEST.c
+++ b/net/netfilter/xt_RATEEST.c
@@ -201,18 +201,8 @@ static __net_init int xt_rateest_net_init(struct net *net)
return 0;
}

-static void __net_exit xt_rateest_net_exit(struct net *net)
-{
- struct xt_rateest_net *xn = net_generic(net, xt_rateest_id);
- int i;
-
- for (i = 0; i < ARRAY_SIZE(xn->hash); i++)
- WARN_ON_ONCE(!hlist_empty(&xn->hash[i]));
-}
-
static struct pernet_operations xt_rateest_net_ops = {
.init = xt_rateest_net_init,
- .exit = xt_rateest_net_exit,
.id = &xt_rateest_id,
.size = sizeof(struct xt_rateest_net),
};
--
2.19.1




2018-12-14 12:42:46

by Greg Kroah-Hartman

[permalink] [raw]
Subject: [PATCH 4.19 054/142] ASoC: omap-abe-twl6040: Fix missing audio card caused by deferred probing

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit 76836fd354922ebe4798a64fda01f8dc6a8b0984 ]

The machine driver fails to probe in next-20181113 with:

[ 2.539093] omap-abe-twl6040 sound: ASoC: CODEC DAI twl6040-legacy not registered
[ 2.546630] omap-abe-twl6040 sound: devm_snd_soc_register_card() failed: -517
...
[ 3.693206] omap-abe-twl6040 sound: ASoC: Both platform name/of_node are set for TWL6040
[ 3.701446] omap-abe-twl6040 sound: ASoC: failed to init link TWL6040
[ 3.708007] omap-abe-twl6040 sound: devm_snd_soc_register_card() failed: -22
[ 3.715148] omap-abe-twl6040: probe of sound failed with error -22

Bisect pointed to a merge commit:
first bad commit: [0f688ab20a540aafa984c5dbd68a71debebf4d7f] Merge remote-tracking branch 'net-next/master'

and a diff between a working kernel does not reveal anything which would
explain the change in behavior.

Further investigation showed that on the second try of loading fails
because the dai_link->platform is no longer NULL and it might be pointing
to uninitialized memory.

The fix is to move the snd_soc_dai_link and snd_soc_card inside of the
abe_twl6040 struct, which is dynamically allocated every time the driver
probes.

Signed-off-by: Peter Ujfalusi <[email protected]>
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/soc/omap/omap-abe-twl6040.c | 67 +++++++++++++------------------
1 file changed, 29 insertions(+), 38 deletions(-)

diff --git a/sound/soc/omap/omap-abe-twl6040.c b/sound/soc/omap/omap-abe-twl6040.c
index d5ae9eb8c756..fed45b41f9d3 100644
--- a/sound/soc/omap/omap-abe-twl6040.c
+++ b/sound/soc/omap/omap-abe-twl6040.c
@@ -36,6 +36,8 @@
#include "../codecs/twl6040.h"

struct abe_twl6040 {
+ struct snd_soc_card card;
+ struct snd_soc_dai_link dai_links[2];
int jack_detection; /* board can detect jack events */
int mclk_freq; /* MCLK frequency speed for twl6040 */
};
@@ -208,40 +210,10 @@ static int omap_abe_dmic_init(struct snd_soc_pcm_runtime *rtd)
ARRAY_SIZE(dmic_audio_map));
}

-/* Digital audio interface glue - connects codec <--> CPU */
-static struct snd_soc_dai_link abe_twl6040_dai_links[] = {
- {
- .name = "TWL6040",
- .stream_name = "TWL6040",
- .codec_dai_name = "twl6040-legacy",
- .codec_name = "twl6040-codec",
- .init = omap_abe_twl6040_init,
- .ops = &omap_abe_ops,
- },
- {
- .name = "DMIC",
- .stream_name = "DMIC Capture",
- .codec_dai_name = "dmic-hifi",
- .codec_name = "dmic-codec",
- .init = omap_abe_dmic_init,
- .ops = &omap_abe_dmic_ops,
- },
-};
-
-/* Audio machine driver */
-static struct snd_soc_card omap_abe_card = {
- .owner = THIS_MODULE,
-
- .dapm_widgets = twl6040_dapm_widgets,
- .num_dapm_widgets = ARRAY_SIZE(twl6040_dapm_widgets),
- .dapm_routes = audio_map,
- .num_dapm_routes = ARRAY_SIZE(audio_map),
-};
-
static int omap_abe_probe(struct platform_device *pdev)
{
struct device_node *node = pdev->dev.of_node;
- struct snd_soc_card *card = &omap_abe_card;
+ struct snd_soc_card *card;
struct device_node *dai_node;
struct abe_twl6040 *priv;
int num_links = 0;
@@ -252,12 +224,18 @@ static int omap_abe_probe(struct platform_device *pdev)
return -ENODEV;
}

- card->dev = &pdev->dev;
-
priv = devm_kzalloc(&pdev->dev, sizeof(struct abe_twl6040), GFP_KERNEL);
if (priv == NULL)
return -ENOMEM;

+ card = &priv->card;
+ card->dev = &pdev->dev;
+ card->owner = THIS_MODULE;
+ card->dapm_widgets = twl6040_dapm_widgets;
+ card->num_dapm_widgets = ARRAY_SIZE(twl6040_dapm_widgets);
+ card->dapm_routes = audio_map;
+ card->num_dapm_routes = ARRAY_SIZE(audio_map);
+
if (snd_soc_of_parse_card_name(card, "ti,model")) {
dev_err(&pdev->dev, "Card name is not provided\n");
return -ENODEV;
@@ -274,14 +252,27 @@ static int omap_abe_probe(struct platform_device *pdev)
dev_err(&pdev->dev, "McPDM node is not provided\n");
return -EINVAL;
}
- abe_twl6040_dai_links[0].cpu_of_node = dai_node;
- abe_twl6040_dai_links[0].platform_of_node = dai_node;
+
+ priv->dai_links[0].name = "DMIC";
+ priv->dai_links[0].stream_name = "TWL6040";
+ priv->dai_links[0].cpu_of_node = dai_node;
+ priv->dai_links[0].platform_of_node = dai_node;
+ priv->dai_links[0].codec_dai_name = "twl6040-legacy";
+ priv->dai_links[0].codec_name = "twl6040-codec";
+ priv->dai_links[0].init = omap_abe_twl6040_init;
+ priv->dai_links[0].ops = &omap_abe_ops;

dai_node = of_parse_phandle(node, "ti,dmic", 0);
if (dai_node) {
num_links = 2;
- abe_twl6040_dai_links[1].cpu_of_node = dai_node;
- abe_twl6040_dai_links[1].platform_of_node = dai_node;
+ priv->dai_links[1].name = "TWL6040";
+ priv->dai_links[1].stream_name = "DMIC Capture";
+ priv->dai_links[1].cpu_of_node = dai_node;
+ priv->dai_links[1].platform_of_node = dai_node;
+ priv->dai_links[1].codec_dai_name = "dmic-hifi";
+ priv->dai_links[1].codec_name = "dmic-codec";
+ priv->dai_links[1].init = omap_abe_dmic_init;
+ priv->dai_links[1].ops = &omap_abe_dmic_ops;
} else {
num_links = 1;
}
@@ -300,7 +291,7 @@ static int omap_abe_probe(struct platform_device *pdev)
return -ENODEV;
}

- card->dai_link = abe_twl6040_dai_links;
+ card->dai_link = priv->dai_links;
card->num_links = num_links;

snd_soc_card_set_drvdata(card, priv);
--
2.19.1




2018-12-14 12:42:47

by Greg Kroah-Hartman

[permalink] [raw]
Subject: [PATCH 4.19 050/142] ASoC: Intel: Power down links before turning off display audio power

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit 4c10473d6ddf12ec124c9ff71a5d23bb5388478b ]

On certain platforms, Display HDMI HDA codec was not going to sleep state
after the use when links are powered down after turning off the display
power. As per the HW recommendation, links are powered down before turning
off the display power to ensure that the codec goes to sleep state.

This patch was updated from an earlier version submitted upstream [1]
which conflicted with the changes merged for HDaudio codec support
with the Intel DSP.

[1] https://patchwork.kernel.org/patch/10540213/

Signed-off-by: Sriram Periyasamy <[email protected]>
Signed-off-by: Sanyog Kale <[email protected]>
Signed-off-by: Pierre-Louis Bossart <[email protected]>
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/soc/codecs/hdac_hdmi.c | 11 +++++------
sound/soc/intel/skylake/skl.c | 12 ++++++------
2 files changed, 11 insertions(+), 12 deletions(-)

diff --git a/sound/soc/codecs/hdac_hdmi.c b/sound/soc/codecs/hdac_hdmi.c
index 7b8533abf637..b61d518f4fef 100644
--- a/sound/soc/codecs/hdac_hdmi.c
+++ b/sound/soc/codecs/hdac_hdmi.c
@@ -2184,11 +2184,6 @@ static int hdac_hdmi_runtime_suspend(struct device *dev)
*/
snd_hdac_codec_read(hdev, hdev->afg, 0, AC_VERB_SET_POWER_STATE,
AC_PWRST_D3);
- err = snd_hdac_display_power(bus, false);
- if (err < 0) {
- dev_err(dev, "Cannot turn on display power on i915\n");
- return err;
- }

hlink = snd_hdac_ext_bus_get_link(bus, dev_name(dev));
if (!hlink) {
@@ -2198,7 +2193,11 @@ static int hdac_hdmi_runtime_suspend(struct device *dev)

snd_hdac_ext_bus_link_put(bus, hlink);

- return 0;
+ err = snd_hdac_display_power(bus, false);
+ if (err < 0)
+ dev_err(dev, "Cannot turn off display power on i915\n");
+
+ return err;
}

static int hdac_hdmi_runtime_resume(struct device *dev)
diff --git a/sound/soc/intel/skylake/skl.c b/sound/soc/intel/skylake/skl.c
index 1d17be0f78a0..50f16a0f6535 100644
--- a/sound/soc/intel/skylake/skl.c
+++ b/sound/soc/intel/skylake/skl.c
@@ -752,6 +752,12 @@ static void skl_probe_work(struct work_struct *work)
}
}

+ /*
+ * we are done probing so decrement link counts
+ */
+ list_for_each_entry(hlink, &bus->hlink_list, list)
+ snd_hdac_ext_bus_link_put(bus, hlink);
+
if (IS_ENABLED(CONFIG_SND_SOC_HDAC_HDMI)) {
err = snd_hdac_display_power(bus, false);
if (err < 0) {
@@ -761,12 +767,6 @@ static void skl_probe_work(struct work_struct *work)
}
}

- /*
- * we are done probing so decrement link counts
- */
- list_for_each_entry(hlink, &bus->hlink_list, list)
- snd_hdac_ext_bus_link_put(bus, hlink);
-
/* configure PM */
pm_runtime_put_noidle(bus->dev);
pm_runtime_allow(bus->dev);
--
2.19.1




2018-12-14 12:42:57

by Greg Kroah-Hartman

[permalink] [raw]
Subject: [PATCH 4.19 047/142] hwmon: (raspberrypi) Fix initial notify

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit 35fdc3902179366489a12cae4cb3ccc3b95f0afe ]

In case an under-voltage happens before probing the driver wont
write the critical warning into the kernel log. So don't init
of last_throttled during probe and fix this issue.

Fixes: 74d1e007915f ("hwmon: Add support for RPi voltage sensor")
Reported-by: "Noralf Trønnes" <[email protected]>
Signed-off-by: Stefan Wahren <[email protected]>
Signed-off-by: Guenter Roeck <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/hwmon/raspberrypi-hwmon.c | 6 ------
1 file changed, 6 deletions(-)

diff --git a/drivers/hwmon/raspberrypi-hwmon.c b/drivers/hwmon/raspberrypi-hwmon.c
index be5ba4690895..0d0457245e7d 100644
--- a/drivers/hwmon/raspberrypi-hwmon.c
+++ b/drivers/hwmon/raspberrypi-hwmon.c
@@ -115,7 +115,6 @@ static int rpi_hwmon_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct rpi_hwmon_data *data;
- int ret;

data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
if (!data)
@@ -124,11 +123,6 @@ static int rpi_hwmon_probe(struct platform_device *pdev)
/* Parent driver assure that firmware is correct */
data->fw = dev_get_drvdata(dev->parent);

- /* Init throttled */
- ret = rpi_firmware_property(data->fw, RPI_FIRMWARE_GET_THROTTLED,
- &data->last_throttled,
- sizeof(data->last_throttled));
-
data->hwmon_dev = devm_hwmon_device_register_with_info(dev, "rpi_volt",
data,
&rpi_chip_info,
--
2.19.1




2018-12-14 12:43:13

by Greg Kroah-Hartman

[permalink] [raw]
Subject: [PATCH 4.19 024/142] ASoC: qdsp6: q6afe: Fix wrong MI2S SD line mask

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit 112b57fa737445b2361be332ce8cc0fd3e2b994e ]

SD line mask for MI2S starts from BIT 0 instead of BIT 1.
Fix all bit mask for MI2S SD lines.

Signed-off-by: Rohit kumar <[email protected]>
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/soc/qcom/qdsp6/q6afe.c | 16 ++++++++--------
1 file changed, 8 insertions(+), 8 deletions(-)

diff --git a/sound/soc/qcom/qdsp6/q6afe.c b/sound/soc/qcom/qdsp6/q6afe.c
index 000775b4bba8..829b5e987b2a 100644
--- a/sound/soc/qcom/qdsp6/q6afe.c
+++ b/sound/soc/qcom/qdsp6/q6afe.c
@@ -49,14 +49,14 @@
#define AFE_PORT_I2S_SD1 0x2
#define AFE_PORT_I2S_SD2 0x3
#define AFE_PORT_I2S_SD3 0x4
-#define AFE_PORT_I2S_SD0_MASK BIT(0x1)
-#define AFE_PORT_I2S_SD1_MASK BIT(0x2)
-#define AFE_PORT_I2S_SD2_MASK BIT(0x3)
-#define AFE_PORT_I2S_SD3_MASK BIT(0x4)
-#define AFE_PORT_I2S_SD0_1_MASK GENMASK(2, 1)
-#define AFE_PORT_I2S_SD2_3_MASK GENMASK(4, 3)
-#define AFE_PORT_I2S_SD0_1_2_MASK GENMASK(3, 1)
-#define AFE_PORT_I2S_SD0_1_2_3_MASK GENMASK(4, 1)
+#define AFE_PORT_I2S_SD0_MASK BIT(0x0)
+#define AFE_PORT_I2S_SD1_MASK BIT(0x1)
+#define AFE_PORT_I2S_SD2_MASK BIT(0x2)
+#define AFE_PORT_I2S_SD3_MASK BIT(0x3)
+#define AFE_PORT_I2S_SD0_1_MASK GENMASK(1, 0)
+#define AFE_PORT_I2S_SD2_3_MASK GENMASK(3, 2)
+#define AFE_PORT_I2S_SD0_1_2_MASK GENMASK(2, 0)
+#define AFE_PORT_I2S_SD0_1_2_3_MASK GENMASK(3, 0)
#define AFE_PORT_I2S_QUAD01 0x5
#define AFE_PORT_I2S_QUAD23 0x6
#define AFE_PORT_I2S_6CHS 0x7
--
2.19.1




2018-12-14 12:43:18

by Greg Kroah-Hartman

[permalink] [raw]
Subject: [PATCH 4.19 023/142] ASoC: rsnd: fixup clock start checker

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit 3ee9a76a8c5a10e1bfb04b81db767c6d562ddaf3 ]

commit 4d230d12710646 ("ASoC: rsnd: fixup not to call clk_get/set under
non-atomic") fixuped clock start timing. But it exchanged clock start
checker from ssi->usrcnt to ssi->rate.

Current rsnd_ssi_master_clk_start() is called from .prepare,
but some player (for example GStreamer) might calls it many times.
In such case, the checker might returns error even though it was not
error. It should check ssi->usrcnt instead of ssi->rate.
This patch fixup it. Without this patch, GStreamer can't switch
48kHz / 44.1kHz.

Reported-by: Yusuke Goda <[email protected]>
Signed-off-by: Kuninori Morimoto <[email protected]>
Tested-by: Yusuke Goda <[email protected]>
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/soc/sh/rcar/ssi.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/sound/soc/sh/rcar/ssi.c b/sound/soc/sh/rcar/ssi.c
index 3f880ec66459..a566dae3ec8a 100644
--- a/sound/soc/sh/rcar/ssi.c
+++ b/sound/soc/sh/rcar/ssi.c
@@ -283,7 +283,7 @@ static int rsnd_ssi_master_clk_start(struct rsnd_mod *mod,
if (rsnd_ssi_is_multi_slave(mod, io))
return 0;

- if (ssi->rate) {
+ if (ssi->usrcnt > 1) {
if (ssi->rate != rate) {
dev_err(dev, "SSI parent/child should use same rate\n");
return -EINVAL;
--
2.19.1




2018-12-14 12:43:32

by Greg Kroah-Hartman

[permalink] [raw]
Subject: [PATCH 4.19 021/142] net: fix XPS static_key accounting

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

From: Sabrina Dubroca <[email protected]>

[ Upstream commit 867d0ad476db89a1e8af3f297af402399a54eea5 ]

Commit 04157469b7b8 ("net: Use static_key for XPS maps") introduced a
static key for XPS, but the increments/decrements don't match.

First, the static key's counter is incremented once for each queue, but
only decremented once for a whole batch of queues, leading to large
unbalances.

Second, the xps_rxqs_needed key is decremented whenever we reset a batch
of queues, whether they had any rxqs mapping or not, so that if we setup
cpu-XPS on em1 and RXQS-XPS on em2, resetting the queues on em1 would
decrement the xps_rxqs_needed key.

This reworks the accounting scheme so that the xps_needed key is
incremented only once for each type of XPS for all the queues on a
device, and the xps_rxqs_needed key is incremented only once for all
queues. This is sufficient to let us retrieve queues via
get_xps_queue().

This patch introduces a new reset_xps_maps(), which reinitializes and
frees the appropriate map (xps_rxqs_map or xps_cpus_map), and drops a
reference to the needed keys:
- both xps_needed and xps_rxqs_needed, in case of rxqs maps,
- only xps_needed, in case of CPU maps.

Now, we also need to call reset_xps_maps() at the end of
__netif_set_xps_queue() when there's no active map left, for example
when writing '00000000,00000000' to all queues' xps_rxqs setting.

Fixes: 04157469b7b8 ("net: Use static_key for XPS maps")
Signed-off-by: Sabrina Dubroca <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/core/dev.c | 45 ++++++++++++++++++++++++---------------------
1 file changed, 24 insertions(+), 21 deletions(-)

--- a/net/core/dev.c
+++ b/net/core/dev.c
@@ -2161,6 +2161,20 @@ static bool remove_xps_queue_cpu(struct
return active;
}

+static void reset_xps_maps(struct net_device *dev,
+ struct xps_dev_maps *dev_maps,
+ bool is_rxqs_map)
+{
+ if (is_rxqs_map) {
+ static_key_slow_dec_cpuslocked(&xps_rxqs_needed);
+ RCU_INIT_POINTER(dev->xps_rxqs_map, NULL);
+ } else {
+ RCU_INIT_POINTER(dev->xps_cpus_map, NULL);
+ }
+ static_key_slow_dec_cpuslocked(&xps_needed);
+ kfree_rcu(dev_maps, rcu);
+}
+
static void clean_xps_maps(struct net_device *dev, const unsigned long *mask,
struct xps_dev_maps *dev_maps, unsigned int nr_ids,
u16 offset, u16 count, bool is_rxqs_map)
@@ -2172,13 +2186,8 @@ static void clean_xps_maps(struct net_de
j < nr_ids;)
active |= remove_xps_queue_cpu(dev, dev_maps, j, offset,
count);
- if (!active) {
- if (is_rxqs_map)
- RCU_INIT_POINTER(dev->xps_rxqs_map, NULL);
- else
- RCU_INIT_POINTER(dev->xps_cpus_map, NULL);
- kfree_rcu(dev_maps, rcu);
- }
+ if (!active)
+ reset_xps_maps(dev, dev_maps, is_rxqs_map);

if (!is_rxqs_map) {
for (i = offset + (count - 1); count--; i--) {
@@ -2222,10 +2231,6 @@ static void netif_reset_xps_queues(struc
false);

out_no_maps:
- if (static_key_enabled(&xps_rxqs_needed))
- static_key_slow_dec_cpuslocked(&xps_rxqs_needed);
-
- static_key_slow_dec_cpuslocked(&xps_needed);
mutex_unlock(&xps_map_mutex);
cpus_read_unlock();
}
@@ -2343,9 +2348,12 @@ int __netif_set_xps_queue(struct net_dev
if (!new_dev_maps)
goto out_no_new_maps;

- static_key_slow_inc_cpuslocked(&xps_needed);
- if (is_rxqs_map)
- static_key_slow_inc_cpuslocked(&xps_rxqs_needed);
+ if (!dev_maps) {
+ /* Increment static keys at most once per type */
+ static_key_slow_inc_cpuslocked(&xps_needed);
+ if (is_rxqs_map)
+ static_key_slow_inc_cpuslocked(&xps_rxqs_needed);
+ }

for (j = -1; j = netif_attrmask_next(j, possible_mask, nr_ids),
j < nr_ids;) {
@@ -2443,13 +2451,8 @@ out_no_new_maps:
}

/* free map if not active */
- if (!active) {
- if (is_rxqs_map)
- RCU_INIT_POINTER(dev->xps_rxqs_map, NULL);
- else
- RCU_INIT_POINTER(dev->xps_cpus_map, NULL);
- kfree_rcu(dev_maps, rcu);
- }
+ if (!active)
+ reset_xps_maps(dev, dev_maps, is_rxqs_map);

out_no_maps:
mutex_unlock(&xps_map_mutex);



2018-12-14 12:43:37

by Greg Kroah-Hartman

[permalink] [raw]
Subject: [PATCH 4.19 059/142] aio: fix failure to put the file pointer

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit 53fffe29a9e664a999dd3787e4428da8c30533e0 ]

If the ioprio capability check fails, we return without putting
the file pointer.

Fixes: d9a08a9e616b ("fs: Add aio iopriority support")
Signed-off-by: Jens Axboe <[email protected]>
Signed-off-by: Al Viro <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/aio.c | 1 +
1 file changed, 1 insertion(+)

diff --git a/fs/aio.c b/fs/aio.c
index b9350f3360c6..04c4d6218978 100644
--- a/fs/aio.c
+++ b/fs/aio.c
@@ -1436,6 +1436,7 @@ static int aio_prep_rw(struct kiocb *req, struct iocb *iocb)
ret = ioprio_check_cap(iocb->aio_reqprio);
if (ret) {
pr_debug("aio ioprio check cap error: %d\n", ret);
+ fput(req->ki_filp);
return ret;
}

--
2.19.1




2018-12-14 12:44:02

by Greg Kroah-Hartman

[permalink] [raw]
Subject: [PATCH 4.19 055/142] ASoC: dapm: Recalculate audio map forcely when card instantiated

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit 882eab6c28d23a970ae73b7eb831b169a672d456 ]

Audio map are possible in wrong state before card->instantiated has
been set to true. Imaging the following examples:

time 1: at the beginning

in:-1 in:-1 in:-1 in:-1
out:-1 out:-1 out:-1 out:-1
SIGGEN A B Spk

time 2: after someone called snd_soc_dapm_new_widgets()
(e.g. create_fill_widget_route_map() in sound/soc/codecs/hdac_hdmi.c)

in:1 in:0 in:0 in:0
out:0 out:0 out:0 out:1
SIGGEN A B Spk

time 3: routes added

in:1 in:0 in:0 in:0
out:0 out:0 out:0 out:1
SIGGEN -----> A -----> B ---> Spk

In the end, the path should be powered on but it did not. At time 3,
"in" of SIGGEN and "out" of Spk did not propagate to their neighbors
because snd_soc_dapm_add_path() will not invalidate the paths if
the card has not instantiated (i.e. card->instantiated is false).
To correct the state of audio map, recalculate the whole map forcely.

Signed-off-by: Tzung-Bi Shih <[email protected]>
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/soc/soc-core.c | 1 +
1 file changed, 1 insertion(+)

diff --git a/sound/soc/soc-core.c b/sound/soc/soc-core.c
index 473eefe8658e..62aa320c2070 100644
--- a/sound/soc/soc-core.c
+++ b/sound/soc/soc-core.c
@@ -2126,6 +2126,7 @@ static int snd_soc_instantiate_card(struct snd_soc_card *card)
}

card->instantiated = 1;
+ dapm_mark_endpoints_dirty(card);
snd_soc_dapm_sync(&card->dapm);
mutex_unlock(&card->mutex);
mutex_unlock(&client_mutex);
--
2.19.1




2018-12-14 12:44:03

by Greg Kroah-Hartman

[permalink] [raw]
Subject: [PATCH 4.19 020/142] net: restore call to netdev_queue_numa_node_write when resetting XPS

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

From: Sabrina Dubroca <[email protected]>

[ Upstream commit f28c020fb488e1a8b87469812017044bef88aa2b ]

Before commit 80d19669ecd3 ("net: Refactor XPS for CPUs and Rx queues"),
netif_reset_xps_queues() did netdev_queue_numa_node_write() for all the
queues being reset. Now, this is only done when the "active" variable in
clean_xps_maps() is false, ie when on all the CPUs, there's no active
XPS mapping left.

Fixes: 80d19669ecd3 ("net: Refactor XPS for CPUs and Rx queues")
Signed-off-by: Sabrina Dubroca <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/core/dev.c | 16 +++++++++-------
1 file changed, 9 insertions(+), 7 deletions(-)

--- a/net/core/dev.c
+++ b/net/core/dev.c
@@ -2173,17 +2173,19 @@ static void clean_xps_maps(struct net_de
active |= remove_xps_queue_cpu(dev, dev_maps, j, offset,
count);
if (!active) {
- if (is_rxqs_map) {
+ if (is_rxqs_map)
RCU_INIT_POINTER(dev->xps_rxqs_map, NULL);
- } else {
+ else
RCU_INIT_POINTER(dev->xps_cpus_map, NULL);
+ kfree_rcu(dev_maps, rcu);
+ }

- for (i = offset + (count - 1); count--; i--)
- netdev_queue_numa_node_write(
- netdev_get_tx_queue(dev, i),
- NUMA_NO_NODE);
+ if (!is_rxqs_map) {
+ for (i = offset + (count - 1); count--; i--) {
+ netdev_queue_numa_node_write(
+ netdev_get_tx_queue(dev, i),
+ NUMA_NO_NODE);
}
- kfree_rcu(dev_maps, rcu);
}
}




2018-12-14 12:44:03

by Greg Kroah-Hartman

[permalink] [raw]
Subject: [PATCH 4.19 036/142] netfilter: nf_conncount: use spin_lock_bh instead of spin_lock

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit fd3e71a9f71e232181a225301a75936373636ccc ]

conn_free() holds lock with spin_lock() and it is called by both
nf_conncount_lookup() and nf_conncount_gc_list(). nf_conncount_lookup()
is called from bottom-half context and nf_conncount_gc_list() from
process context. So that spin_lock() call is not safe. Hence
conn_free() should use spin_lock_bh() instead of spin_lock().

test commands:
%nft add table ip filter
%nft add chain ip filter input { type filter hook input priority 0\; }
%nft add rule filter input meter test { ip saddr ct count over 2 } \
counter

splat looks like:
[ 461.996507] ================================
[ 461.998999] WARNING: inconsistent lock state
[ 461.998999] 4.19.0-rc6+ #22 Not tainted
[ 461.998999] --------------------------------
[ 461.998999] inconsistent {IN-SOFTIRQ-W} -> {SOFTIRQ-ON-W} usage.
[ 461.998999] kworker/0:2/134 [HC0[0]:SC0[0]:HE1:SE1] takes:
[ 461.998999] 00000000a71a559a (&(&list->list_lock)->rlock){+.?.}, at: conn_free+0x69/0x2b0 [nf_conncount]
[ 461.998999] {IN-SOFTIRQ-W} state was registered at:
[ 461.998999] _raw_spin_lock+0x30/0x70
[ 461.998999] nf_conncount_add+0x28a/0x520 [nf_conncount]
[ 461.998999] nft_connlimit_eval+0x401/0x580 [nft_connlimit]
[ 461.998999] nft_dynset_eval+0x32b/0x590 [nf_tables]
[ 461.998999] nft_do_chain+0x497/0x1430 [nf_tables]
[ 461.998999] nft_do_chain_ipv4+0x255/0x330 [nf_tables]
[ 461.998999] nf_hook_slow+0xb1/0x160
[ ... ]
[ 461.998999] other info that might help us debug this:
[ 461.998999] Possible unsafe locking scenario:
[ 461.998999]
[ 461.998999] CPU0
[ 461.998999] ----
[ 461.998999] lock(&(&list->list_lock)->rlock);
[ 461.998999] <Interrupt>
[ 461.998999] lock(&(&list->list_lock)->rlock);
[ 461.998999]
[ 461.998999] *** DEADLOCK ***
[ 461.998999]
[ ... ]

Fixes: 5c789e131cbb ("netfilter: nf_conncount: Add list lock and gc worker, and RCU for init tree search")
Signed-off-by: Taehee Yoo <[email protected]>
Signed-off-by: Pablo Neira Ayuso <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/netfilter/nf_conncount.c | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/net/netfilter/nf_conncount.c b/net/netfilter/nf_conncount.c
index 02ca7df793f5..71b1f4f99580 100644
--- a/net/netfilter/nf_conncount.c
+++ b/net/netfilter/nf_conncount.c
@@ -106,15 +106,15 @@ nf_conncount_add(struct nf_conncount_list *list,
conn->zone = *zone;
conn->cpu = raw_smp_processor_id();
conn->jiffies32 = (u32)jiffies;
- spin_lock(&list->list_lock);
+ spin_lock_bh(&list->list_lock);
if (list->dead == true) {
kmem_cache_free(conncount_conn_cachep, conn);
- spin_unlock(&list->list_lock);
+ spin_unlock_bh(&list->list_lock);
return NF_CONNCOUNT_SKIP;
}
list_add_tail(&conn->node, &list->head);
list->count++;
- spin_unlock(&list->list_lock);
+ spin_unlock_bh(&list->list_lock);
return NF_CONNCOUNT_ADDED;
}
EXPORT_SYMBOL_GPL(nf_conncount_add);
@@ -132,10 +132,10 @@ static bool conn_free(struct nf_conncount_list *list,
{
bool free_entry = false;

- spin_lock(&list->list_lock);
+ spin_lock_bh(&list->list_lock);

if (list->count == 0) {
- spin_unlock(&list->list_lock);
+ spin_unlock_bh(&list->list_lock);
return free_entry;
}

@@ -144,7 +144,7 @@ static bool conn_free(struct nf_conncount_list *list,
if (list->count == 0)
free_entry = true;

- spin_unlock(&list->list_lock);
+ spin_unlock_bh(&list->list_lock);
call_rcu(&conn->rcu_head, __conn_free);
return free_entry;
}
--
2.19.1




2018-12-14 12:44:03

by Greg Kroah-Hartman

[permalink] [raw]
Subject: [PATCH 4.19 039/142] netfilter: nf_tables: dont skip inactive chains during update

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit 0fb39bbe43d4481fcf300d2b5822de60942fd189 ]

There is no synchronization between packet path and the configuration plane.

The packet path uses two arrays with rules, one contains the current (active)
generation. The other either contains the last (obsolete) generation or
the future one.

Consider:
cpu1 cpu2
nft_do_chain(c);
delete c
net->gen++;
genbit = !!net->gen;
rules = c->rg[genbit];

cpu1 ignores c when updating if c is not active anymore in the new
generation.

On cpu2, we now use rules from wrong generation, as c->rg[old]
contains the rules matching 'c' whereas c->rg[new] was not updated and
can even point to rules that have been free'd already, causing a crash.

To fix this, make sure that 'current' to the 'next' generation are
identical for chains that are going away so that c->rg[new] will just
use the matching rules even if genbit was incremented already.

Fixes: 0cbc06b3faba7 ("netfilter: nf_tables: remove synchronize_rcu in commit phase")
Signed-off-by: Florian Westphal <[email protected]>
Signed-off-by: Pablo Neira Ayuso <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/netfilter/nf_tables_api.c | 9 +++------
1 file changed, 3 insertions(+), 6 deletions(-)

diff --git a/net/netfilter/nf_tables_api.c b/net/netfilter/nf_tables_api.c
index 2cfb173cd0b2..4c016b49fe2b 100644
--- a/net/netfilter/nf_tables_api.c
+++ b/net/netfilter/nf_tables_api.c
@@ -6277,7 +6277,7 @@ static void nf_tables_commit_chain_free_rules_old(struct nft_rule **rules)
call_rcu(&old->h, __nf_tables_commit_chain_free_rules_old);
}

-static void nf_tables_commit_chain_active(struct net *net, struct nft_chain *chain)
+static void nf_tables_commit_chain(struct net *net, struct nft_chain *chain)
{
struct nft_rule **g0, **g1;
bool next_genbit;
@@ -6363,11 +6363,8 @@ static int nf_tables_commit(struct net *net, struct sk_buff *skb)

/* step 2. Make rules_gen_X visible to packet path */
list_for_each_entry(table, &net->nft.tables, list) {
- list_for_each_entry(chain, &table->chains, list) {
- if (!nft_is_active_next(net, chain))
- continue;
- nf_tables_commit_chain_active(net, chain);
- }
+ list_for_each_entry(chain, &table->chains, list)
+ nf_tables_commit_chain(net, chain);
}

/*
--
2.19.1




2018-12-14 12:44:07

by Greg Kroah-Hartman

[permalink] [raw]
Subject: [PATCH 4.19 034/142] arm64: dts: sdm845-mtp: Reserve reserved gpios

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit 5f8d3ab136d0ccb59c4d628d8f85e0d8f2761d07 ]

With the introduction of commit 3edfb7bd76bd ("gpiolib: Show correct
direction from the beginning") the gpiolib will attempt to read the
direction of all pins, which triggers a read from protected register
regions.

The pins 0 through 3 and 81 through 84 are protected, so mark these as
reserved.

Signed-off-by: Bjorn Andersson <[email protected]>
Reviewed-by: Stephen Boyd <[email protected]>
Reviewed-by: Linus Walleij <[email protected]>
Signed-off-by: Andy Gross <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm64/boot/dts/qcom/sdm845-mtp.dts | 4 ++++
1 file changed, 4 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sdm845-mtp.dts b/arch/arm64/boot/dts/qcom/sdm845-mtp.dts
index 6d651f314193..6921f8dc5ebb 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-mtp.dts
+++ b/arch/arm64/boot/dts/qcom/sdm845-mtp.dts
@@ -31,6 +31,10 @@
status = "okay";
};

+&tlmm {
+ gpio-reserved-ranges = <0 4>, <81 4>;
+};
+
&uart9 {
status = "okay";
};
--
2.19.1




2018-12-14 12:44:14

by Greg Kroah-Hartman

[permalink] [raw]
Subject: [PATCH 4.19 043/142] netfilter: nf_tables: fix use-after-free when deleting compat expressions

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit 29e3880109e357fdc607b4393f8308cef6af9413 ]

nft_compat ops do not have static storage duration, unlike all other
expressions.

When nf_tables_expr_destroy() returns, expr->ops might have been
free'd already, so we need to store next address before calling
expression destructor.

For same reason, we can't deref match pointer after nft_xt_put().

This can be easily reproduced by adding msleep() before
nft_match_destroy() returns.

Fixes: 0ca743a55991 ("netfilter: nf_tables: add compatibility layer for x_tables")
Reported-by: Pablo Neira Ayuso <[email protected]>
Signed-off-by: Florian Westphal <[email protected]>
Signed-off-by: Pablo Neira Ayuso <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/netfilter/nf_tables_api.c | 5 +++--
net/netfilter/nft_compat.c | 3 ++-
2 files changed, 5 insertions(+), 3 deletions(-)

diff --git a/net/netfilter/nf_tables_api.c b/net/netfilter/nf_tables_api.c
index 4c016b49fe2b..06ed55cef962 100644
--- a/net/netfilter/nf_tables_api.c
+++ b/net/netfilter/nf_tables_api.c
@@ -2432,7 +2432,7 @@ static int nf_tables_getrule(struct net *net, struct sock *nlsk,
static void nf_tables_rule_destroy(const struct nft_ctx *ctx,
struct nft_rule *rule)
{
- struct nft_expr *expr;
+ struct nft_expr *expr, *next;

lockdep_assert_held(&ctx->net->nft.commit_mutex);
/*
@@ -2441,8 +2441,9 @@ static void nf_tables_rule_destroy(const struct nft_ctx *ctx,
*/
expr = nft_expr_first(rule);
while (expr != nft_expr_last(rule) && expr->ops) {
+ next = nft_expr_next(expr);
nf_tables_expr_destroy(ctx, expr);
- expr = nft_expr_next(expr);
+ expr = next;
}
kfree(rule);
}
diff --git a/net/netfilter/nft_compat.c b/net/netfilter/nft_compat.c
index ad2fe6a7e47d..29d6fc73caf9 100644
--- a/net/netfilter/nft_compat.c
+++ b/net/netfilter/nft_compat.c
@@ -501,6 +501,7 @@ __nft_match_destroy(const struct nft_ctx *ctx, const struct nft_expr *expr,
void *info)
{
struct xt_match *match = expr->ops->data;
+ struct module *me = match->me;
struct xt_mtdtor_param par;

par.net = ctx->net;
@@ -511,7 +512,7 @@ __nft_match_destroy(const struct nft_ctx *ctx, const struct nft_expr *expr,
par.match->destroy(&par);

if (nft_xt_put(container_of(expr->ops, struct nft_xt, ops)))
- module_put(match->me);
+ module_put(me);
}

static void
--
2.19.1




2018-12-14 12:44:17

by Greg Kroah-Hartman

[permalink] [raw]
Subject: [PATCH 4.19 032/142] tools: bpftool: prevent infinite loop in get_fdinfo()

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit 53909030aa29bffe1f8490df62176c2375135652 ]

Function getline() returns -1 on failure to read a line, thus creating
an infinite loop in get_fdinfo() if the key is not found. Fix it by
calling the function only as long as we get a strictly positive return
value.

Found by copying the code for a key which is not always present...

Fixes: 71bb428fe2c1 ("tools: bpf: add bpftool")
Signed-off-by: Quentin Monnet <[email protected]>
Reviewed-by: Jakub Kicinski <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
tools/bpf/bpftool/common.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/tools/bpf/bpftool/common.c b/tools/bpf/bpftool/common.c
index b3a0709ea7ed..fcaf00621102 100644
--- a/tools/bpf/bpftool/common.c
+++ b/tools/bpf/bpftool/common.c
@@ -304,7 +304,7 @@ char *get_fdinfo(int fd, const char *key)
return NULL;
}

- while ((n = getline(&line, &line_n, fdi))) {
+ while ((n = getline(&line, &line_n, fdi)) > 0) {
char *value;
int len;

--
2.19.1




2018-12-14 12:44:31

by Greg Kroah-Hartman

[permalink] [raw]
Subject: [PATCH 4.19 028/142] ARM: dts: LogicPD Torpedo: Fix mmc3_dat1 interrupt

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit 6809564d64ff1301d44c13334cc0e8369e825a20 ]

When the Torpedo was first introduced back at Kernel 4.2,
the interrupt extended flag has been set incorrectly.

It was subsequently moved, so this patch corrects Kernel
4.18+

Fixes: a38867305203 ("ARM: dts: Move move WiFi bindings to
logicpd-torpedo-37xx-devkit") # v4.18+

Signed-off-by: Adam Ford <[email protected]>
Signed-off-by: Tony Lindgren <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm/boot/dts/logicpd-torpedo-37xx-devkit.dts | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/logicpd-torpedo-37xx-devkit.dts b/arch/arm/boot/dts/logicpd-torpedo-37xx-devkit.dts
index 9d5d53fbe9c0..c39cf2ca54da 100644
--- a/arch/arm/boot/dts/logicpd-torpedo-37xx-devkit.dts
+++ b/arch/arm/boot/dts/logicpd-torpedo-37xx-devkit.dts
@@ -35,7 +35,7 @@
* jumpering combinations for the long run.
*/
&mmc3 {
- interrupts-extended = <&intc 94 &omap3_pmx_core2 0x46>;
+ interrupts-extended = <&intc 94 &omap3_pmx_core 0x136>;
pinctrl-0 = <&mmc3_pins &mmc3_core2_pins>;
pinctrl-names = "default";
vmmc-supply = <&wl12xx_vmmc>;
--
2.19.1




2018-12-14 12:44:39

by Greg Kroah-Hartman

[permalink] [raw]
Subject: [PATCH 4.19 027/142] ARM: dts: am3517: Fix pinmuxing for CD on MMC1

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit e7f4ffffa972db4820c23ff9831a6a4f3f6d8cc5 ]

The MMC1 is active low, not active high. For some reason,
this worked with different combination of U-Boot and kernels,
but it's supposed to be active low and is currently broken.

Fixes: cfaa856a2510 ("ARM: dts: am3517: Add pinmuxing, CD and
WP for MMC1") #kernel 4.18+

Signed-off-by: Adam Ford <[email protected]>
Signed-off-by: Tony Lindgren <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm/boot/dts/am3517-evm.dts | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/am3517-evm.dts b/arch/arm/boot/dts/am3517-evm.dts
index 1d158cfda15f..c45aef806870 100644
--- a/arch/arm/boot/dts/am3517-evm.dts
+++ b/arch/arm/boot/dts/am3517-evm.dts
@@ -227,7 +227,7 @@
vmmc-supply = <&vmmc_fixed>;
bus-width = <4>;
wp-gpios = <&gpio4 30 GPIO_ACTIVE_HIGH>; /* gpio_126 */
- cd-gpios = <&gpio4 31 GPIO_ACTIVE_HIGH>; /* gpio_127 */
+ cd-gpios = <&gpio4 31 GPIO_ACTIVE_LOW>; /* gpio_127 */
};

&mmc3 {
--
2.19.1




2018-12-14 12:44:54

by Greg Kroah-Hartman

[permalink] [raw]
Subject: [PATCH 4.19 004/142] ipv6: sr: properly initialize flowi6 prior passing to ip6_route_output

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

From: Shmulik Ladkani <[email protected]>

[ Upstream commit 1b4e5ad5d6b9f15cd0b5121f86d4719165958417 ]

In 'seg6_output', stack variable 'struct flowi6 fl6' was missing
initialization.

Fixes: 6c8702c60b88 ("ipv6: sr: add support for SRH encapsulation and injection with lwtunnels")
Signed-off-by: Shmulik Ladkani <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/ipv6/seg6_iptunnel.c | 1 +
1 file changed, 1 insertion(+)

--- a/net/ipv6/seg6_iptunnel.c
+++ b/net/ipv6/seg6_iptunnel.c
@@ -347,6 +347,7 @@ static int seg6_output(struct net *net,
struct ipv6hdr *hdr = ipv6_hdr(skb);
struct flowi6 fl6;

+ memset(&fl6, 0, sizeof(fl6));
fl6.daddr = hdr->daddr;
fl6.saddr = hdr->saddr;
fl6.flowlabel = ip6_flowinfo(hdr);



2018-12-14 12:44:59

by Greg Kroah-Hartman

[permalink] [raw]
Subject: [PATCH 4.19 006/142] net/mlx4_core: Correctly set PFC param if global pause is turned off.

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

From: Tarick Bedeir <[email protected]>

[ Upstream commit bd5122cd1e0644d8bd8dd84517c932773e999766 ]

rx_ppp and tx_ppp can be set between 0 and 255, so don't clamp to 1.

Fixes: 6e8814ceb7e8 ("net/mlx4_en: Fix mixed PFC and Global pause user control requests")
Signed-off-by: Tarick Bedeir <[email protected]>
Reviewed-by: Eran Ben Elisha <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/mellanox/mlx4/en_ethtool.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/net/ethernet/mellanox/mlx4/en_ethtool.c
+++ b/drivers/net/ethernet/mellanox/mlx4/en_ethtool.c
@@ -1084,8 +1084,8 @@ static int mlx4_en_set_pauseparam(struct

tx_pause = !!(pause->tx_pause);
rx_pause = !!(pause->rx_pause);
- rx_ppp = priv->prof->rx_ppp && !(tx_pause || rx_pause);
- tx_ppp = priv->prof->tx_ppp && !(tx_pause || rx_pause);
+ rx_ppp = (tx_pause || rx_pause) ? 0 : priv->prof->rx_ppp;
+ tx_ppp = (tx_pause || rx_pause) ? 0 : priv->prof->tx_ppp;

err = mlx4_SET_PORT_general(mdev->dev, priv->port,
priv->rx_skb_size + ETH_FCS_LEN,



2018-12-14 12:45:04

by Greg Kroah-Hartman

[permalink] [raw]
Subject: [PATCH 4.19 005/142] net: 8139cp: fix a BUG triggered by changing mtu with network traffic

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

From: Su Yanjun <[email protected]>

[ Upstream commit a5d4a89245ead1f37ed135213653c5beebea4237 ]

When changing mtu many times with traffic, a bug is triggered:

[ 1035.684037] kernel BUG at lib/dynamic_queue_limits.c:26!
[ 1035.684042] invalid opcode: 0000 [#1] SMP
[ 1035.684049] Modules linked in: loop binfmt_misc 8139cp(OE) macsec
tcp_diag udp_diag inet_diag unix_diag af_packet_diag netlink_diag tcp_lp
fuse uinput xt_CHECKSUM iptable_mangle ipt_MASQUERADE
nf_nat_masquerade_ipv4 iptable_nat nf_nat_ipv4 nf_nat nf_conntrack_ipv4
nf_defrag_ipv4 xt_conntrack nf_conntrack ipt_REJECT nf_reject_ipv4 tun
bridge stp llc ebtable_filter ebtables ip6table_filter devlink
ip6_tables iptable_filter sunrpc snd_hda_codec_generic snd_hda_intel
snd_hda_codec snd_hda_core snd_hwdep ppdev snd_seq iosf_mbi crc32_pclmul
parport_pc snd_seq_device ghash_clmulni_intel parport snd_pcm
aesni_intel joydev lrw snd_timer virtio_balloon sg gf128mul glue_helper
ablk_helper cryptd snd soundcore i2c_piix4 pcspkr ip_tables xfs
libcrc32c sr_mod sd_mod cdrom crc_t10dif crct10dif_generic ata_generic
[ 1035.684102] pata_acpi virtio_console qxl drm_kms_helper syscopyarea
sysfillrect sysimgblt floppy fb_sys_fops crct10dif_pclmul
crct10dif_common ttm crc32c_intel serio_raw ata_piix drm libata 8139too
virtio_pci drm_panel_orientation_quirks virtio_ring virtio mii dm_mirror
dm_region_hash dm_log dm_mod [last unloaded: 8139cp]
[ 1035.684132] CPU: 9 PID: 25140 Comm: if-mtu-change Kdump: loaded
Tainted: G OE ------------ T 3.10.0-957.el7.x86_64 #1
[ 1035.684134] Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011
[ 1035.684136] task: ffff8f59b1f5a080 ti: ffff8f5a2e32c000 task.ti:
ffff8f5a2e32c000
[ 1035.684149] RIP: 0010:[<ffffffffba3a40d0>] [<ffffffffba3a40d0>]
dql_completed+0x180/0x190
[ 1035.684162] RSP: 0000:ffff8f5a75483e50 EFLAGS: 00010093
[ 1035.684162] RAX: 00000000000000c2 RBX: ffff8f5a6f91c000 RCX:
0000000000000000
[ 1035.684162] RDX: 0000000000000000 RSI: 0000000000000184 RDI:
ffff8f599fea3ec0
[ 1035.684162] RBP: ffff8f5a75483ea8 R08: 00000000000000c2 R09:
0000000000000000
[ 1035.684162] R10: 00000000000616ef R11: ffff8f5a75483b56 R12:
ffff8f599fea3e00
[ 1035.684162] R13: 0000000000000001 R14: 0000000000000000 R15:
0000000000000184
[ 1035.684162] FS: 00007fa8434de740(0000) GS:ffff8f5a75480000(0000)
knlGS:0000000000000000
[ 1035.684162] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 1035.684162] CR2: 00000000004305d0 CR3: 000000024eb66000 CR4:
00000000001406e0
[ 1035.684162] Call Trace:
[ 1035.684162] <IRQ>
[ 1035.684162] [<ffffffffc08cbaf8>] ? cp_interrupt+0x478/0x580 [8139cp]
[ 1035.684162] [<ffffffffba14a294>]
__handle_irq_event_percpu+0x44/0x1c0
[ 1035.684162] [<ffffffffba14a442>] handle_irq_event_percpu+0x32/0x80
[ 1035.684162] [<ffffffffba14a4cc>] handle_irq_event+0x3c/0x60
[ 1035.684162] [<ffffffffba14db29>] handle_fasteoi_irq+0x59/0x110
[ 1035.684162] [<ffffffffba02e554>] handle_irq+0xe4/0x1a0
[ 1035.684162] [<ffffffffba7795dd>] do_IRQ+0x4d/0xf0
[ 1035.684162] [<ffffffffba76b362>] common_interrupt+0x162/0x162
[ 1035.684162] <EOI>
[ 1035.684162] [<ffffffffba0c2ae4>] ? __wake_up_bit+0x24/0x70
[ 1035.684162] [<ffffffffba1e46f5>] ? do_set_pte+0xd5/0x120
[ 1035.684162] [<ffffffffba1b64fb>] unlock_page+0x2b/0x30
[ 1035.684162] [<ffffffffba1e4879>] do_read_fault.isra.61+0x139/0x1b0
[ 1035.684162] [<ffffffffba1e9134>] handle_pte_fault+0x2f4/0xd10
[ 1035.684162] [<ffffffffba1ebc6d>] handle_mm_fault+0x39d/0x9b0
[ 1035.684162] [<ffffffffba76f5e3>] __do_page_fault+0x203/0x500
[ 1035.684162] [<ffffffffba76f9c6>] trace_do_page_fault+0x56/0x150
[ 1035.684162] [<ffffffffba76ef42>] do_async_page_fault+0x22/0xf0
[ 1035.684162] [<ffffffffba76b788>] async_page_fault+0x28/0x30
[ 1035.684162] Code: 54 c7 47 54 ff ff ff ff 44 0f 49 ce 48 8b 35 48 2f
9c 00 48 89 77 58 e9 fe fe ff ff 0f 1f 80 00 00 00 00 41 89 d1 e9 ef fe
ff ff <0f> 0b 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 55 8d 42 ff 48
[ 1035.684162] RIP [<ffffffffba3a40d0>] dql_completed+0x180/0x190
[ 1035.684162] RSP <ffff8f5a75483e50>

It's not the same as in 7fe0ee09 patch described.
As 8139cp uses shared irq mode, other device irq will trigger
cp_interrupt to execute.

cp_change_mtu
-> cp_close
-> cp_open

In cp_close routine just before free_irq(), some interrupt may occur.
In my environment, cp_interrupt exectutes and IntrStatus is 0x4,
exactly TxOk. That will cause cp_tx to wake device queue.

As device queue is started, cp_start_xmit and cp_open will run at same
time which will cause kernel BUG.

For example:
[#] for tx descriptor

At start:

[#][#][#]
num_queued=3

After cp_init_hw->cp_start_hw->netdev_reset_queue:

[#][#][#]
num_queued=0

When 8139cp starts to work then cp_tx will check
num_queued mismatchs the complete_bytes.

The patch will check IntrMask before check IntrStatus in cp_interrupt.
When 8139cp interrupt is disabled, just return.

Signed-off-by: Su Yanjun <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/realtek/8139cp.c | 5 +++++
1 file changed, 5 insertions(+)

--- a/drivers/net/ethernet/realtek/8139cp.c
+++ b/drivers/net/ethernet/realtek/8139cp.c
@@ -571,6 +571,7 @@ static irqreturn_t cp_interrupt (int irq
struct cp_private *cp;
int handled = 0;
u16 status;
+ u16 mask;

if (unlikely(dev == NULL))
return IRQ_NONE;
@@ -578,6 +579,10 @@ static irqreturn_t cp_interrupt (int irq

spin_lock(&cp->lock);

+ mask = cpr16(IntrMask);
+ if (!mask)
+ goto out_unlock;
+
status = cpr16(IntrStatus);
if (!status || (status == 0xFFFF))
goto out_unlock;



2018-12-14 12:45:07

by Greg Kroah-Hartman

[permalink] [raw]
Subject: [PATCH 4.19 002/142] ipv6: Check available headroom in ip6_xmit() even without options

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

From: Stefano Brivio <[email protected]>

[ Upstream commit 66033f47ca60294a95fc85ec3a3cc909dab7b765 ]

Even if we send an IPv6 packet without options, MAX_HEADER might not be
enough to account for the additional headroom required by alignment of
hardware headers.

On a configuration without HYPERV_NET, WLAN, AX25, and with IPV6_TUNNEL,
sending short SCTP packets over IPv4 over L2TP over IPv6, we start with
100 bytes of allocated headroom in sctp_packet_transmit(), end up with 54
bytes after l2tp_xmit_skb(), and 14 bytes in ip6_finish_output2().

Those would be enough to append our 14 bytes header, but we're going to
align that to 16 bytes, and write 2 bytes out of the allocated slab in
neigh_hh_output().

KASan says:

[ 264.967848] ==================================================================
[ 264.967861] BUG: KASAN: slab-out-of-bounds in ip6_finish_output2+0x1aec/0x1c70
[ 264.967866] Write of size 16 at addr 000000006af1c7fe by task netperf/6201
[ 264.967870]
[ 264.967876] CPU: 0 PID: 6201 Comm: netperf Not tainted 4.20.0-rc4+ #1
[ 264.967881] Hardware name: IBM 2827 H43 400 (z/VM 6.4.0)
[ 264.967887] Call Trace:
[ 264.967896] ([<00000000001347d6>] show_stack+0x56/0xa0)
[ 264.967903] [<00000000017e379c>] dump_stack+0x23c/0x290
[ 264.967912] [<00000000007bc594>] print_address_description+0xf4/0x290
[ 264.967919] [<00000000007bc8fc>] kasan_report+0x13c/0x240
[ 264.967927] [<000000000162f5e4>] ip6_finish_output2+0x1aec/0x1c70
[ 264.967935] [<000000000163f890>] ip6_finish_output+0x430/0x7f0
[ 264.967943] [<000000000163fe44>] ip6_output+0x1f4/0x580
[ 264.967953] [<000000000163882a>] ip6_xmit+0xfea/0x1ce8
[ 264.967963] [<00000000017396e2>] inet6_csk_xmit+0x282/0x3f8
[ 264.968033] [<000003ff805fb0ba>] l2tp_xmit_skb+0xe02/0x13e0 [l2tp_core]
[ 264.968037] [<000003ff80631192>] l2tp_eth_dev_xmit+0xda/0x150 [l2tp_eth]
[ 264.968041] [<0000000001220020>] dev_hard_start_xmit+0x268/0x928
[ 264.968069] [<0000000001330e8e>] sch_direct_xmit+0x7ae/0x1350
[ 264.968071] [<000000000122359c>] __dev_queue_xmit+0x2b7c/0x3478
[ 264.968075] [<00000000013d2862>] ip_finish_output2+0xce2/0x11a0
[ 264.968078] [<00000000013d9b14>] ip_finish_output+0x56c/0x8c8
[ 264.968081] [<00000000013ddd1e>] ip_output+0x226/0x4c0
[ 264.968083] [<00000000013dbd6c>] __ip_queue_xmit+0x894/0x1938
[ 264.968100] [<000003ff80bc3a5c>] sctp_packet_transmit+0x29d4/0x3648 [sctp]
[ 264.968116] [<000003ff80b7bf68>] sctp_outq_flush_ctrl.constprop.5+0x8d0/0xe50 [sctp]
[ 264.968131] [<000003ff80b7c716>] sctp_outq_flush+0x22e/0x7d8 [sctp]
[ 264.968146] [<000003ff80b35c68>] sctp_cmd_interpreter.isra.16+0x530/0x6800 [sctp]
[ 264.968161] [<000003ff80b3410a>] sctp_do_sm+0x222/0x648 [sctp]
[ 264.968177] [<000003ff80bbddac>] sctp_primitive_ASSOCIATE+0xbc/0xf8 [sctp]
[ 264.968192] [<000003ff80b93328>] __sctp_connect+0x830/0xc20 [sctp]
[ 264.968208] [<000003ff80bb11ce>] sctp_inet_connect+0x2e6/0x378 [sctp]
[ 264.968212] [<0000000001197942>] __sys_connect+0x21a/0x450
[ 264.968215] [<000000000119aff8>] sys_socketcall+0x3d0/0xb08
[ 264.968218] [<000000000184ea7a>] system_call+0x2a2/0x2c0

[...]

Just like ip_finish_output2() does for IPv4, check that we have enough
headroom in ip6_xmit(), and reallocate it if we don't.

This issue is older than git history.

Reported-by: Jianlin Shi <[email protected]>
Signed-off-by: Stefano Brivio <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/ipv6/ip6_output.c | 42 +++++++++++++++++++++---------------------
1 file changed, 21 insertions(+), 21 deletions(-)

--- a/net/ipv6/ip6_output.c
+++ b/net/ipv6/ip6_output.c
@@ -195,37 +195,37 @@ int ip6_xmit(const struct sock *sk, stru
const struct ipv6_pinfo *np = inet6_sk(sk);
struct in6_addr *first_hop = &fl6->daddr;
struct dst_entry *dst = skb_dst(skb);
+ unsigned int head_room;
struct ipv6hdr *hdr;
u8 proto = fl6->flowi6_proto;
int seg_len = skb->len;
int hlimit = -1;
u32 mtu;

- if (opt) {
- unsigned int head_room;
-
- /* First: exthdrs may take lots of space (~8K for now)
- MAX_HEADER is not enough.
- */
- head_room = opt->opt_nflen + opt->opt_flen;
- seg_len += head_room;
- head_room += sizeof(struct ipv6hdr) + LL_RESERVED_SPACE(dst->dev);
+ head_room = sizeof(struct ipv6hdr) + LL_RESERVED_SPACE(dst->dev);
+ if (opt)
+ head_room += opt->opt_nflen + opt->opt_flen;

- if (skb_headroom(skb) < head_room) {
- struct sk_buff *skb2 = skb_realloc_headroom(skb, head_room);
- if (!skb2) {
- IP6_INC_STATS(net, ip6_dst_idev(skb_dst(skb)),
- IPSTATS_MIB_OUTDISCARDS);
- kfree_skb(skb);
- return -ENOBUFS;
- }
- if (skb->sk)
- skb_set_owner_w(skb2, skb->sk);
- consume_skb(skb);
- skb = skb2;
+ if (unlikely(skb_headroom(skb) < head_room)) {
+ struct sk_buff *skb2 = skb_realloc_headroom(skb, head_room);
+ if (!skb2) {
+ IP6_INC_STATS(net, ip6_dst_idev(skb_dst(skb)),
+ IPSTATS_MIB_OUTDISCARDS);
+ kfree_skb(skb);
+ return -ENOBUFS;
}
+ if (skb->sk)
+ skb_set_owner_w(skb2, skb->sk);
+ consume_skb(skb);
+ skb = skb2;
+ }
+
+ if (opt) {
+ seg_len += opt->opt_nflen + opt->opt_flen;
+
if (opt->opt_flen)
ipv6_push_frag_opts(skb, opt, &proto);
+
if (opt->opt_nflen)
ipv6_push_nfrag_opts(skb, opt, &proto, &first_hop,
&fl6->saddr);



2018-12-14 12:45:14

by Greg Kroah-Hartman

[permalink] [raw]
Subject: [PATCH 4.19 015/142] tcp: fix NULL ref in tail loss probe

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

From: Yuchung Cheng <[email protected]>

[ Upstream commit b2b7af861122a0c0f6260155c29a1b2e594cd5b5 ]

TCP loss probe timer may fire when the retranmission queue is empty but
has a non-zero tp->packets_out counter. tcp_send_loss_probe will call
tcp_rearm_rto which triggers NULL pointer reference by fetching the
retranmission queue head in its sub-routines.

Add a more detailed warning to help catch the root cause of the inflight
accounting inconsistency.

Reported-by: Rafael Tinoco <[email protected]>
Signed-off-by: Yuchung Cheng <[email protected]>
Signed-off-by: Eric Dumazet <[email protected]>
Signed-off-by: Neal Cardwell <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/ipv4/tcp_output.c | 11 +++++++----
1 file changed, 7 insertions(+), 4 deletions(-)

--- a/net/ipv4/tcp_output.c
+++ b/net/ipv4/tcp_output.c
@@ -2479,15 +2479,18 @@ void tcp_send_loss_probe(struct sock *sk
goto rearm_timer;
}
skb = skb_rb_last(&sk->tcp_rtx_queue);
+ if (unlikely(!skb)) {
+ WARN_ONCE(tp->packets_out,
+ "invalid inflight: %u state %u cwnd %u mss %d\n",
+ tp->packets_out, sk->sk_state, tp->snd_cwnd, mss);
+ inet_csk(sk)->icsk_pending = 0;
+ return;
+ }

/* At most one outstanding TLP retransmission. */
if (tp->tlp_high_seq)
goto rearm_timer;

- /* Retransmit last segment. */
- if (WARN_ON(!skb))
- goto rearm_timer;
-
if (skb_still_in_host_queue(sk, skb))
goto rearm_timer;




2018-12-14 12:45:18

by Greg Kroah-Hartman

[permalink] [raw]
Subject: [PATCH 4.19 014/142] tcp: Do not underestimate rwnd_limited

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

From: Eric Dumazet <[email protected]>

[ Upstream commit 41727549de3e7281feb174d568c6e46823db8684 ]

If available rwnd is too small, tcp_tso_should_defer()
can decide it is worth waiting before splitting a TSO packet.

This really means we are rwnd limited.

Fixes: 5615f88614a4 ("tcp: instrument how long TCP is limited by receive window")
Signed-off-by: Eric Dumazet <[email protected]>
Acked-by: Soheil Hassas Yeganeh <[email protected]>
Reviewed-by: Yuchung Cheng <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/ipv4/tcp_output.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)

--- a/net/ipv4/tcp_output.c
+++ b/net/ipv4/tcp_output.c
@@ -2338,8 +2338,11 @@ static bool tcp_write_xmit(struct sock *
} else {
if (!push_one &&
tcp_tso_should_defer(sk, skb, &is_cwnd_limited,
- max_segs))
+ max_segs)) {
+ if (!is_cwnd_limited)
+ is_rwnd_limited = true;
break;
+ }
}

limit = mss_now;



2018-12-14 12:45:35

by Greg Kroah-Hartman

[permalink] [raw]
Subject: [PATCH 4.19 012/142] rtnetlink: ndo_dflt_fdb_dump() only work for ARPHRD_ETHER devices

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

From: Eric Dumazet <[email protected]>

[ Upstream commit 688838934c231bb08f46db687e57f6d8bf82709c ]

kmsan was able to trigger a kernel-infoleak using a gre device [1]

nlmsg_populate_fdb_fill() has a hard coded assumption
that dev->addr_len is ETH_ALEN, as normally guaranteed
for ARPHRD_ETHER devices.

A similar issue was fixed recently in commit da71577545a5
("rtnetlink: Disallow FDB configuration for non-Ethernet device")

[1]
BUG: KMSAN: kernel-infoleak in copyout lib/iov_iter.c:143 [inline]
BUG: KMSAN: kernel-infoleak in _copy_to_iter+0x4c0/0x2700 lib/iov_iter.c:576
CPU: 0 PID: 6697 Comm: syz-executor310 Not tainted 4.20.0-rc3+ #95
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x32d/0x480 lib/dump_stack.c:113
kmsan_report+0x12c/0x290 mm/kmsan/kmsan.c:683
kmsan_internal_check_memory+0x32a/0xa50 mm/kmsan/kmsan.c:743
kmsan_copy_to_user+0x78/0xd0 mm/kmsan/kmsan_hooks.c:634
copyout lib/iov_iter.c:143 [inline]
_copy_to_iter+0x4c0/0x2700 lib/iov_iter.c:576
copy_to_iter include/linux/uio.h:143 [inline]
skb_copy_datagram_iter+0x4e2/0x1070 net/core/datagram.c:431
skb_copy_datagram_msg include/linux/skbuff.h:3316 [inline]
netlink_recvmsg+0x6f9/0x19d0 net/netlink/af_netlink.c:1975
sock_recvmsg_nosec net/socket.c:794 [inline]
sock_recvmsg+0x1d1/0x230 net/socket.c:801
___sys_recvmsg+0x444/0xae0 net/socket.c:2278
__sys_recvmsg net/socket.c:2327 [inline]
__do_sys_recvmsg net/socket.c:2337 [inline]
__se_sys_recvmsg+0x2fa/0x450 net/socket.c:2334
__x64_sys_recvmsg+0x4a/0x70 net/socket.c:2334
do_syscall_64+0xcf/0x110 arch/x86/entry/common.c:291
entry_SYSCALL_64_after_hwframe+0x63/0xe7
RIP: 0033:0x441119
Code: 18 89 d0 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 db 0a fc ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:00007fffc7f008a8 EFLAGS: 00000207 ORIG_RAX: 000000000000002f
RAX: ffffffffffffffda RBX: 00000000004002c8 RCX: 0000000000441119
RDX: 0000000000000040 RSI: 00000000200005c0 RDI: 0000000000000003
RBP: 00000000006cc018 R08: 0000000000000100 R09: 0000000000000100
R10: 0000000000000100 R11: 0000000000000207 R12: 0000000000402080
R13: 0000000000402110 R14: 0000000000000000 R15: 0000000000000000

Uninit was stored to memory at:
kmsan_save_stack_with_flags mm/kmsan/kmsan.c:246 [inline]
kmsan_save_stack mm/kmsan/kmsan.c:261 [inline]
kmsan_internal_chain_origin+0x13d/0x240 mm/kmsan/kmsan.c:469
kmsan_memcpy_memmove_metadata+0x1a9/0xf70 mm/kmsan/kmsan.c:344
kmsan_memcpy_metadata+0xb/0x10 mm/kmsan/kmsan.c:362
__msan_memcpy+0x61/0x70 mm/kmsan/kmsan_instr.c:162
__nla_put lib/nlattr.c:744 [inline]
nla_put+0x20a/0x2d0 lib/nlattr.c:802
nlmsg_populate_fdb_fill+0x444/0x810 net/core/rtnetlink.c:3466
nlmsg_populate_fdb net/core/rtnetlink.c:3775 [inline]
ndo_dflt_fdb_dump+0x73a/0x960 net/core/rtnetlink.c:3807
rtnl_fdb_dump+0x1318/0x1cb0 net/core/rtnetlink.c:3979
netlink_dump+0xc79/0x1c90 net/netlink/af_netlink.c:2244
__netlink_dump_start+0x10c4/0x11d0 net/netlink/af_netlink.c:2352
netlink_dump_start include/linux/netlink.h:216 [inline]
rtnetlink_rcv_msg+0x141b/0x1540 net/core/rtnetlink.c:4910
netlink_rcv_skb+0x394/0x640 net/netlink/af_netlink.c:2477
rtnetlink_rcv+0x50/0x60 net/core/rtnetlink.c:4965
netlink_unicast_kernel net/netlink/af_netlink.c:1310 [inline]
netlink_unicast+0x1699/0x1740 net/netlink/af_netlink.c:1336
netlink_sendmsg+0x13c7/0x1440 net/netlink/af_netlink.c:1917
sock_sendmsg_nosec net/socket.c:621 [inline]
sock_sendmsg net/socket.c:631 [inline]
___sys_sendmsg+0xe3b/0x1240 net/socket.c:2116
__sys_sendmsg net/socket.c:2154 [inline]
__do_sys_sendmsg net/socket.c:2163 [inline]
__se_sys_sendmsg+0x305/0x460 net/socket.c:2161
__x64_sys_sendmsg+0x4a/0x70 net/socket.c:2161
do_syscall_64+0xcf/0x110 arch/x86/entry/common.c:291
entry_SYSCALL_64_after_hwframe+0x63/0xe7

Uninit was created at:
kmsan_save_stack_with_flags mm/kmsan/kmsan.c:246 [inline]
kmsan_internal_poison_shadow+0x6d/0x130 mm/kmsan/kmsan.c:170
kmsan_kmalloc+0xa1/0x100 mm/kmsan/kmsan_hooks.c:186
__kmalloc+0x14c/0x4d0 mm/slub.c:3825
kmalloc include/linux/slab.h:551 [inline]
__hw_addr_create_ex net/core/dev_addr_lists.c:34 [inline]
__hw_addr_add_ex net/core/dev_addr_lists.c:80 [inline]
__dev_mc_add+0x357/0x8a0 net/core/dev_addr_lists.c:670
dev_mc_add+0x6d/0x80 net/core/dev_addr_lists.c:687
ip_mc_filter_add net/ipv4/igmp.c:1128 [inline]
igmp_group_added+0x4d4/0xb80 net/ipv4/igmp.c:1311
__ip_mc_inc_group+0xea9/0xf70 net/ipv4/igmp.c:1444
ip_mc_inc_group net/ipv4/igmp.c:1453 [inline]
ip_mc_up+0x1c3/0x400 net/ipv4/igmp.c:1775
inetdev_event+0x1d03/0x1d80 net/ipv4/devinet.c:1522
notifier_call_chain kernel/notifier.c:93 [inline]
__raw_notifier_call_chain kernel/notifier.c:394 [inline]
raw_notifier_call_chain+0x13d/0x240 kernel/notifier.c:401
__dev_notify_flags+0x3da/0x860 net/core/dev.c:1733
dev_change_flags+0x1ac/0x230 net/core/dev.c:7569
do_setlink+0x165f/0x5ea0 net/core/rtnetlink.c:2492
rtnl_newlink+0x2ad7/0x35a0 net/core/rtnetlink.c:3111
rtnetlink_rcv_msg+0x1148/0x1540 net/core/rtnetlink.c:4947
netlink_rcv_skb+0x394/0x640 net/netlink/af_netlink.c:2477
rtnetlink_rcv+0x50/0x60 net/core/rtnetlink.c:4965
netlink_unicast_kernel net/netlink/af_netlink.c:1310 [inline]
netlink_unicast+0x1699/0x1740 net/netlink/af_netlink.c:1336
netlink_sendmsg+0x13c7/0x1440 net/netlink/af_netlink.c:1917
sock_sendmsg_nosec net/socket.c:621 [inline]
sock_sendmsg net/socket.c:631 [inline]
___sys_sendmsg+0xe3b/0x1240 net/socket.c:2116
__sys_sendmsg net/socket.c:2154 [inline]
__do_sys_sendmsg net/socket.c:2163 [inline]
__se_sys_sendmsg+0x305/0x460 net/socket.c:2161
__x64_sys_sendmsg+0x4a/0x70 net/socket.c:2161
do_syscall_64+0xcf/0x110 arch/x86/entry/common.c:291
entry_SYSCALL_64_after_hwframe+0x63/0xe7

Bytes 36-37 of 105 are uninitialized
Memory access of size 105 starts at ffff88819686c000
Data copied to user address 0000000020000380

Fixes: d83b06036048 ("net: add fdb generic dump routine")
Signed-off-by: Eric Dumazet <[email protected]>
Cc: John Fastabend <[email protected]>
Cc: Ido Schimmel <[email protected]>
Cc: David Ahern <[email protected]>
Reviewed-by: Ido Schimmel <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/core/rtnetlink.c | 3 +++
1 file changed, 3 insertions(+)

--- a/net/core/rtnetlink.c
+++ b/net/core/rtnetlink.c
@@ -3730,6 +3730,9 @@ int ndo_dflt_fdb_dump(struct sk_buff *sk
{
int err;

+ if (dev->type != ARPHRD_ETHER)
+ return -EINVAL;
+
netif_addr_lock_bh(dev);
err = nlmsg_populate_fdb(skb, cb, dev, idx, &dev->uc);
if (err)



2018-12-14 12:45:43

by Greg Kroah-Hartman

[permalink] [raw]
Subject: [PATCH 4.19 018/142] net: phy: sfp: correct store of detected link modes

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

From: Baruch Siach <[email protected]>

[ Upstream commit d7f7e0018b96fd1a30a968faa9464eb57372c1ec ]

The link modes that sfp_parse_support() detects are stored in the
'modes' bitmap. There is no reason to make an exception for 1000Base-PX
or 1000Base-BX10.

Fixes: 03145864bd0f ("sfp: support 1G BiDi (eg, FiberStore SFP-GE-BX) modules")
Signed-off-by: Baruch Siach <[email protected]>
Acked-by: Russell King <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/phy/sfp-bus.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/net/phy/sfp-bus.c
+++ b/drivers/net/phy/sfp-bus.c
@@ -162,7 +162,7 @@ void sfp_parse_support(struct sfp_bus *b
/* 1000Base-PX or 1000Base-BX10 */
if ((id->base.e_base_px || id->base.e_base_bx10) &&
br_min <= 1300 && br_max >= 1200)
- phylink_set(support, 1000baseX_Full);
+ phylink_set(modes, 1000baseX_Full);

/* For active or passive cables, select the link modes
* based on the bit rates and the cable compliance bytes.



2018-12-14 12:46:54

by Greg Kroah-Hartman

[permalink] [raw]
Subject: [PATCH 4.19 010/142] net: use skb_list_del_init() to remove from RX sublists

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

From: Edward Cree <[email protected]>

[ Upstream commit 22f6bbb7bcfcef0b373b0502a7ff390275c575dd ]

list_del() leaves the skb->next pointer poisoned, which can then lead to
a crash in e.g. OVS forwarding. For example, setting up an OVS VXLAN
forwarding bridge on sfc as per:

========
$ ovs-vsctl show
5dfd9c47-f04b-4aaa-aa96-4fbb0a522a30
Bridge "br0"
Port "br0"
Interface "br0"
type: internal
Port "enp6s0f0"
Interface "enp6s0f0"
Port "vxlan0"
Interface "vxlan0"
type: vxlan
options: {key="1", local_ip="10.0.0.5", remote_ip="10.0.0.4"}
ovs_version: "2.5.0"
========
(where 10.0.0.5 is an address on enp6s0f1)
and sending traffic across it will lead to the following panic:
========
general protection fault: 0000 [#1] SMP PTI
CPU: 5 PID: 0 Comm: swapper/5 Not tainted 4.20.0-rc3-ehc+ #701
Hardware name: Dell Inc. PowerEdge R710/0M233H, BIOS 6.4.0 07/23/2013
RIP: 0010:dev_hard_start_xmit+0x38/0x200
Code: 53 48 89 fb 48 83 ec 20 48 85 ff 48 89 54 24 08 48 89 4c 24 18 0f 84 ab 01 00 00 48 8d 86 90 00 00 00 48 89 f5 48 89 44 24 10 <4c> 8b 33 48 c7 03 00 00 00 00 48 8b 05 c7 d1 b3 00 4d 85 f6 0f 95
RSP: 0018:ffff888627b437e0 EFLAGS: 00010202
RAX: 0000000000000000 RBX: dead000000000100 RCX: ffff88862279c000
RDX: ffff888614a342c0 RSI: 0000000000000000 RDI: 0000000000000000
RBP: ffff888618a88000 R08: 0000000000000001 R09: 00000000000003e8
R10: 0000000000000000 R11: ffff888614a34140 R12: 0000000000000000
R13: 0000000000000062 R14: dead000000000100 R15: ffff888616430000
FS: 0000000000000000(0000) GS:ffff888627b40000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f6d2bc6d000 CR3: 000000000200a000 CR4: 00000000000006e0
Call Trace:
<IRQ>
__dev_queue_xmit+0x623/0x870
? masked_flow_lookup+0xf7/0x220 [openvswitch]
? ep_poll_callback+0x101/0x310
do_execute_actions+0xaba/0xaf0 [openvswitch]
? __wake_up_common+0x8a/0x150
? __wake_up_common_lock+0x87/0xc0
? queue_userspace_packet+0x31c/0x5b0 [openvswitch]
ovs_execute_actions+0x47/0x120 [openvswitch]
ovs_dp_process_packet+0x7d/0x110 [openvswitch]
ovs_vport_receive+0x6e/0xd0 [openvswitch]
? dst_alloc+0x64/0x90
? rt_dst_alloc+0x50/0xd0
? ip_route_input_slow+0x19a/0x9a0
? __udp_enqueue_schedule_skb+0x198/0x1b0
? __udp4_lib_rcv+0x856/0xa30
? __udp4_lib_rcv+0x856/0xa30
? cpumask_next_and+0x19/0x20
? find_busiest_group+0x12d/0xcd0
netdev_frame_hook+0xce/0x150 [openvswitch]
__netif_receive_skb_core+0x205/0xae0
__netif_receive_skb_list_core+0x11e/0x220
netif_receive_skb_list+0x203/0x460
? __efx_rx_packet+0x335/0x5e0 [sfc]
efx_poll+0x182/0x320 [sfc]
net_rx_action+0x294/0x3c0
__do_softirq+0xca/0x297
irq_exit+0xa6/0xb0
do_IRQ+0x54/0xd0
common_interrupt+0xf/0xf
</IRQ>
========
So, in all listified-receive handling, instead pull skbs off the lists with
skb_list_del_init().

Fixes: 9af86f933894 ("net: core: fix use-after-free in __netif_receive_skb_list_core")
Fixes: 7da517a3bc52 ("net: core: Another step of skb receive list processing")
Fixes: a4ca8b7df73c ("net: ipv4: fix drop handling in ip_list_rcv() and ip_list_rcv_finish()")
Fixes: d8269e2cbf90 ("net: ipv6: listify ipv6_rcv() and ip6_rcv_finish()")
Signed-off-by: Edward Cree <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
include/linux/skbuff.h | 11 +++++++++++
net/core/dev.c | 8 ++++----
net/ipv4/ip_input.c | 4 ++--
net/ipv6/ip6_input.c | 4 ++--
4 files changed, 19 insertions(+), 8 deletions(-)

--- a/include/linux/skbuff.h
+++ b/include/linux/skbuff.h
@@ -1355,6 +1355,17 @@ static inline void skb_zcopy_abort(struc
}
}

+static inline void skb_mark_not_on_list(struct sk_buff *skb)
+{
+ skb->next = NULL;
+}
+
+static inline void skb_list_del_init(struct sk_buff *skb)
+{
+ __list_del_entry(&skb->list);
+ skb_mark_not_on_list(skb);
+}
+
/**
* skb_queue_empty - check if a queue is empty
* @list: queue head
--- a/net/core/dev.c
+++ b/net/core/dev.c
@@ -4981,7 +4981,7 @@ static void __netif_receive_skb_list_cor
struct net_device *orig_dev = skb->dev;
struct packet_type *pt_prev = NULL;

- list_del(&skb->list);
+ skb_list_del_init(skb);
__netif_receive_skb_core(skb, pfmemalloc, &pt_prev);
if (!pt_prev)
continue;
@@ -5137,7 +5137,7 @@ static void netif_receive_skb_list_inter
INIT_LIST_HEAD(&sublist);
list_for_each_entry_safe(skb, next, head, list) {
net_timestamp_check(netdev_tstamp_prequeue, skb);
- list_del(&skb->list);
+ skb_list_del_init(skb);
if (!skb_defer_rx_timestamp(skb))
list_add_tail(&skb->list, &sublist);
}
@@ -5148,7 +5148,7 @@ static void netif_receive_skb_list_inter
rcu_read_lock();
list_for_each_entry_safe(skb, next, head, list) {
xdp_prog = rcu_dereference(skb->dev->xdp_prog);
- list_del(&skb->list);
+ skb_list_del_init(skb);
if (do_xdp_generic(xdp_prog, skb) == XDP_PASS)
list_add_tail(&skb->list, &sublist);
}
@@ -5167,7 +5167,7 @@ static void netif_receive_skb_list_inter

if (cpu >= 0) {
/* Will be handled, remove from list */
- list_del(&skb->list);
+ skb_list_del_init(skb);
enqueue_to_backlog(skb, cpu, &rflow->last_qtail);
}
}
--- a/net/ipv4/ip_input.c
+++ b/net/ipv4/ip_input.c
@@ -551,7 +551,7 @@ static void ip_list_rcv_finish(struct ne
list_for_each_entry_safe(skb, next, head, list) {
struct dst_entry *dst;

- list_del(&skb->list);
+ skb_list_del_init(skb);
/* if ingress device is enslaved to an L3 master device pass the
* skb to its handler for processing
*/
@@ -598,7 +598,7 @@ void ip_list_rcv(struct list_head *head,
struct net_device *dev = skb->dev;
struct net *net = dev_net(dev);

- list_del(&skb->list);
+ skb_list_del_init(skb);
skb = ip_rcv_core(skb, net);
if (skb == NULL)
continue;
--- a/net/ipv6/ip6_input.c
+++ b/net/ipv6/ip6_input.c
@@ -95,7 +95,7 @@ static void ip6_list_rcv_finish(struct n
list_for_each_entry_safe(skb, next, head, list) {
struct dst_entry *dst;

- list_del(&skb->list);
+ skb_list_del_init(skb);
/* if ingress device is enslaved to an L3 master device pass the
* skb to its handler for processing
*/
@@ -295,7 +295,7 @@ void ipv6_list_rcv(struct list_head *hea
struct net_device *dev = skb->dev;
struct net *net = dev_net(dev);

- list_del(&skb->list);
+ skb_list_del_init(skb);
skb = ip6_rcv_core(skb, dev, net);
if (skb == NULL)
continue;



2018-12-14 18:36:12

by kernelci.org bot

[permalink] [raw]
Subject: Re: [PATCH 4.19 000/142] 4.19.10-stable review

stable-rc/linux-4.19.y boot: 117 boots: 0 failed, 116 passed with 1 offline (v4.19.9-143-g4875bf1f86d7)

Full Boot Summary: https://kernelci.org/boot/all/job/stable-rc/branch/linux-4.19.y/kernel/v4.19.9-143-g4875bf1f86d7/
Full Build Summary: https://kernelci.org/build/stable-rc/branch/linux-4.19.y/kernel/v4.19.9-143-g4875bf1f86d7/

Tree: stable-rc
Branch: linux-4.19.y
Git Describe: v4.19.9-143-g4875bf1f86d7
Git Commit: 4875bf1f86d7bdc8dbf3222ab4028239446fab3f
Git URL: http://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
Tested: 62 unique boards, 23 SoC families, 12 builds out of 202

Offline Platforms:

arm:

multi_v7_defconfig:
stih410-b2120: 1 offline lab

---
For more info write to <[email protected]>

2018-12-14 20:13:31

by Shuah Khan

[permalink] [raw]
Subject: Re: [PATCH 4.19 000/142] 4.19.10-stable review

On 12/14/18 4:58 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.19.10 release.
> There are 142 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Sun Dec 16 11:57:12 UTC 2018.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.19.10-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.19.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
>

Compiled and booted on my test system. No dmesg regressions.

thanks,
-- Shuah


2018-12-15 02:07:20

by Guenter Roeck

[permalink] [raw]
Subject: Re: [PATCH 4.19 000/142] 4.19.10-stable review

On 12/14/18 3:58 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.19.10 release.
> There are 142 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Sun Dec 16 11:57:12 UTC 2018.
> Anything received after that time might be too late.
>

Build results:
total: 155 pass: 155 fail: 0
Qemu test results:
total: 337 pass: 337 fail: 0

Details are available at https://kerneltests.org/builders/.

Guenter

2018-12-15 08:07:58

by Greg Kroah-Hartman

[permalink] [raw]
Subject: Re: [PATCH 4.19 000/142] 4.19.10-stable review

On Fri, Dec 14, 2018 at 01:11:32PM -0700, shuah wrote:
> On 12/14/18 4:58 AM, Greg Kroah-Hartman wrote:
> > This is the start of the stable review cycle for the 4.19.10 release.
> > There are 142 patches in this series, all will be posted as a response
> > to this one. If anyone has any issues with these being applied, please
> > let me know.
> >
> > Responses should be made by Sun Dec 16 11:57:12 UTC 2018.
> > Anything received after that time might be too late.
> >
> > The whole patch series can be found in one patch at:
> > https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.19.10-rc1.gz
> > or in the git tree and branch at:
> > git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.19.y
> > and the diffstat can be found below.
> >
> > thanks,
> >
> > greg k-h
> >
>
> Compiled and booted on my test system. No dmesg regressions.

Thanks for testing all of these and letting me know.

greg k-h

2018-12-15 08:08:23

by Greg Kroah-Hartman

[permalink] [raw]
Subject: Re: [PATCH 4.19 000/142] 4.19.10-stable review

On Fri, Dec 14, 2018 at 06:06:10PM -0800, Guenter Roeck wrote:
> On 12/14/18 3:58 AM, Greg Kroah-Hartman wrote:
> > This is the start of the stable review cycle for the 4.19.10 release.
> > There are 142 patches in this series, all will be posted as a response
> > to this one. If anyone has any issues with these being applied, please
> > let me know.
> >
> > Responses should be made by Sun Dec 16 11:57:12 UTC 2018.
> > Anything received after that time might be too late.
> >
>
> Build results:
> total: 155 pass: 155 fail: 0
> Qemu test results:
> total: 337 pass: 337 fail: 0
>
> Details are available at https://kerneltests.org/builders/.

Thanks for testing all of these and letting me know. I'll work on the
4.4 tree later today...

greg k-h

2018-12-15 11:17:16

by Harsh Shandilya

[permalink] [raw]
Subject: Re: [PATCH 4.19 000/142] 4.19.10-stable review

On 14 December 2018 5:28:05 PM IST, Greg Kroah-Hartman <[email protected]> wrote:
>This is the start of the stable review cycle for the 4.19.10 release.
>There are 142 patches in this series, all will be posted as a response
>to this one. If anyone has any issues with these being applied, please
>let me know.
>
>Responses should be made by Sun Dec 16 11:57:12 UTC 2018.
>Anything received after that time might be too late.
>
>The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.19.10-rc1.gz
>or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
>linux-4.19.y
>and the diffstat can be found below.
>
>thanks,
>
>greg k-h
Built and booted on the Lenovo IdeaPad 330-15ARR, no dmesg regressions.
--
Harsh Shandilya
PRJKT Development LLC

2018-12-15 17:02:29

by Dan Rue

[permalink] [raw]
Subject: Re: [PATCH 4.19 000/142] 4.19.10-stable review

On Fri, Dec 14, 2018 at 12:58:05PM +0100, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.19.10 release.
> There are 142 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Sun Dec 16 11:57:12 UTC 2018.
> Anything received after that time might be too late.

Results from Linaro’s test farm.
Regressions detected.

Summary
------------------------------------------------------------------------

kernel: 4.19.10-rc1
git repo: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
git branch: linux-4.19.y
git commit: 4875bf1f86d7bdc8dbf3222ab4028239446fab3f
git describe: v4.19.9-143-g4875bf1f86d7
Test details: https://qa-reports.linaro.org/lkft/linux-stable-rc-4.19-oe/build/v4.19.9-143-g4875bf1f86d7

No regressions (compared to build v4.19.9)

No fixes (compared to build v4.19.9)

Ran 18346 total tests in the following environments and test suites.

Environments
--------------
- dragonboard-410c - arm64
- hi6220-hikey - arm64
- i386
- juno-r2 - arm64
- qemu_arm
- qemu_arm64
- qemu_i386
- qemu_x86_64
- x15 - arm
- x86_64

Test Suites
-----------
* boot
* install-android-platform-tools-r2600
* kselftest
* libhugetlbfs
* ltp-containers-tests
* ltp-cve-tests
* ltp-fs-tests
* ltp-hugetlb-tests
* ltp-io-tests
* ltp-ipc-tests
* ltp-math-tests
* spectre-meltdown-checker-test
* ltp-cap_bounds-tests
* ltp-cpuhotplug-tests
* ltp-fcntl-locktests-tests
* ltp-filecaps-tests
* ltp-fs_bind-tests
* ltp-fs_perms_simple-tests
* ltp-fsx-tests
* ltp-nptl-tests
* ltp-pty-tests
* ltp-sched-tests
* ltp-securebits-tests
* ltp-timers-tests
* ltp-open-posix-tests
* ltp-syscalls-tests
* kselftest-vsyscall-mode-native
* kselftest-vsyscall-mode-none

--
Linaro LKFT
https://lkft.linaro.org

2018-12-15 17:13:49

by Greg Kroah-Hartman

[permalink] [raw]
Subject: Re: [PATCH 4.19 000/142] 4.19.10-stable review

On Sat, Dec 15, 2018 at 11:01:02AM -0600, Dan Rue wrote:
> On Fri, Dec 14, 2018 at 12:58:05PM +0100, Greg Kroah-Hartman wrote:
> > This is the start of the stable review cycle for the 4.19.10 release.
> > There are 142 patches in this series, all will be posted as a response
> > to this one. If anyone has any issues with these being applied, please
> > let me know.
> >
> > Responses should be made by Sun Dec 16 11:57:12 UTC 2018.
> > Anything received after that time might be too late.
>
> Results from Linaro’s test farm.
> Regressions detected.

They were?

>
> Summary
> ------------------------------------------------------------------------
>
> kernel: 4.19.10-rc1
> git repo: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
> git branch: linux-4.19.y
> git commit: 4875bf1f86d7bdc8dbf3222ab4028239446fab3f
> git describe: v4.19.9-143-g4875bf1f86d7
> Test details: https://qa-reports.linaro.org/lkft/linux-stable-rc-4.19-oe/build/v4.19.9-143-g4875bf1f86d7
>
> No regressions (compared to build v4.19.9)
>
> No fixes (compared to build v4.19.9)
>
> Ran 18346 total tests in the following environments and test suites.

This said there were no regressions.

confused,

greg k-h

2018-12-15 19:54:26

by Jiri Wiesner

[permalink] [raw]
Subject: Re: [PATCH 4.19 001/142] ipv4: ipv6: netfilter: Adjust the frag mem limit when truesize changes

On 2018-12-14 12:58, Greg Kroah-Hartman wrote:
> 4.19-stable review patch. If anyone has any objections, please let me
> know.
>
> ------------------
>
> From: Jiri Wiesner <[email protected]>
>
> [ Upstream commit ebaf39e6032faf77218220707fc3fa22487784e0 ]

The patch under review should to be applied to 4.19-stable.

2018-12-17 09:07:53

by Greg Kroah-Hartman

[permalink] [raw]
Subject: Re: [PATCH 4.19 000/142] 4.19.10-stable review

On Sat, Dec 15, 2018 at 04:46:52PM +0530, Harsh Shandilya wrote:
> On 14 December 2018 5:28:05 PM IST, Greg Kroah-Hartman <[email protected]> wrote:
> >This is the start of the stable review cycle for the 4.19.10 release.
> >There are 142 patches in this series, all will be posted as a response
> >to this one. If anyone has any issues with these being applied, please
> >let me know.
> >
> >Responses should be made by Sun Dec 16 11:57:12 UTC 2018.
> >Anything received after that time might be too late.
> >
> >The whole patch series can be found in one patch at:
> > https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.19.10-rc1.gz
> >or in the git tree and branch at:
> > git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
> >linux-4.19.y
> >and the diffstat can be found below.
> >
> >thanks,
> >
> >greg k-h
> Built and booted on the Lenovo IdeaPad 330-15ARR, no dmesg regressions.

Thanks for testing and letting me know.

greg k-h

2018-12-17 14:25:59

by Greg Kroah-Hartman

[permalink] [raw]
Subject: Re: [PATCH 4.19 000/142] 4.19.10-stable review

On Mon, Dec 17, 2018 at 07:56:32AM -0600, Dan Rue wrote:
> On Sat, Dec 15, 2018 at 06:11:45PM +0100, Greg Kroah-Hartman wrote:
> > On Sat, Dec 15, 2018 at 11:01:02AM -0600, Dan Rue wrote:
> > > On Fri, Dec 14, 2018 at 12:58:05PM +0100, Greg Kroah-Hartman wrote:
> > > > This is the start of the stable review cycle for the 4.19.10 release.
> > > > There are 142 patches in this series, all will be posted as a response
> > > > to this one. If anyone has any issues with these being applied, please
> > > > let me know.
> > > >
> > > > Responses should be made by Sun Dec 16 11:57:12 UTC 2018.
> > > > Anything received after that time might be too late.
> > >
> > > Results from Linaro’s test farm.
> > > Regressions detected.
> >
> > They were?
>
> My mistake. There were some false regressions that showed up and I was a
> bit distracted when sending the reports and missed that.
>
> Results from Linaro’s test farm.
> No regressions on arm64, arm, x86_64, and i386.

Ok, good, thanks for confirming, I was confused :)

greg k-h

2018-12-17 17:23:38

by Dan Rue

[permalink] [raw]
Subject: Re: [PATCH 4.19 000/142] 4.19.10-stable review

On Sat, Dec 15, 2018 at 06:11:45PM +0100, Greg Kroah-Hartman wrote:
> On Sat, Dec 15, 2018 at 11:01:02AM -0600, Dan Rue wrote:
> > On Fri, Dec 14, 2018 at 12:58:05PM +0100, Greg Kroah-Hartman wrote:
> > > This is the start of the stable review cycle for the 4.19.10 release.
> > > There are 142 patches in this series, all will be posted as a response
> > > to this one. If anyone has any issues with these being applied, please
> > > let me know.
> > >
> > > Responses should be made by Sun Dec 16 11:57:12 UTC 2018.
> > > Anything received after that time might be too late.
> >
> > Results from Linaro’s test farm.
> > Regressions detected.
>
> They were?

My mistake. There were some false regressions that showed up and I was a
bit distracted when sending the reports and missed that.

Results from Linaro’s test farm.
No regressions on arm64, arm, x86_64, and i386.

>
> >
> > Summary
> > ------------------------------------------------------------------------
> >
> > kernel: 4.19.10-rc1
> > git repo: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
> > git branch: linux-4.19.y
> > git commit: 4875bf1f86d7bdc8dbf3222ab4028239446fab3f
> > git describe: v4.19.9-143-g4875bf1f86d7
> > Test details: https://qa-reports.linaro.org/lkft/linux-stable-rc-4.19-oe/build/v4.19.9-143-g4875bf1f86d7
> >
> > No regressions (compared to build v4.19.9)
> >
> > No fixes (compared to build v4.19.9)
> >
> > Ran 18346 total tests in the following environments and test suites.
>
> This said there were no regressions.
>
> confused,
>
> greg k-h