From: "Kristian H. Kristensen" <[email protected]>
[ Upstream commit 99c66bc051e7407fe0bf0607b142ec0be1a1d1dd ]
Prevents deadlock when fifo is full and reader closes file.
Signed-off-by: Kristian H. Kristensen <[email protected]>
Signed-off-by: Rob Clark <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/msm/msm_rd.c | 7 ++++++-
1 file changed, 6 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/msm/msm_rd.c b/drivers/gpu/drm/msm/msm_rd.c
index 0c2c8d2c631f..25fc161ab618 100644
--- a/drivers/gpu/drm/msm/msm_rd.c
+++ b/drivers/gpu/drm/msm/msm_rd.c
@@ -115,7 +115,9 @@ static void rd_write(struct msm_rd_state *rd, const void *buf, int sz)
char *fptr = &fifo->buf[fifo->head];
int n;
- wait_event(rd->fifo_event, circ_space(&rd->fifo) > 0);
+ wait_event(rd->fifo_event, circ_space(&rd->fifo) > 0 || !rd->open);
+ if (!rd->open)
+ return;
/* Note that smp_load_acquire() is not strictly required
* as CIRC_SPACE_TO_END() does not access the tail more
@@ -213,7 +215,10 @@ static int rd_open(struct inode *inode, struct file *file)
static int rd_release(struct inode *inode, struct file *file)
{
struct msm_rd_state *rd = inode->i_private;
+
rd->open = false;
+ wake_up_all(&rd->fifo_event);
+
return 0;
}
--
2.19.1
From: Marek Vasut <[email protected]>
[ Upstream commit 2137a109a5e39c2bdccfffe65230ed3fadbaac0e ]
In case the upstream clock are not set, which can happen in case the
VC5 has no valid upstream clock, the $src variable is used uninited
by regmap_update_bits(). Check for this condition and return -EINVAL
in such case.
Note that in case the VC5 has no valid upstream clock, the VC5 can
not operate correctly. That is a hardware property of the VC5. The
internal oscilator present in some VC5 models is also considered
upstream clock.
Signed-off-by: Marek Vasut <[email protected]>
Cc: Alexey Firago <[email protected]>
Cc: Laurent Pinchart <[email protected]>
Cc: Stephen Boyd <[email protected]>
Cc: [email protected]
[[email protected]: Added comment about probe preventing this from
happening in the first place]
Signed-off-by: Stephen Boyd <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/clk/clk-versaclock5.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/clk/clk-versaclock5.c b/drivers/clk/clk-versaclock5.c
index decffb3826ec..a738af893532 100644
--- a/drivers/clk/clk-versaclock5.c
+++ b/drivers/clk/clk-versaclock5.c
@@ -262,8 +262,10 @@ static int vc5_mux_set_parent(struct clk_hw *hw, u8 index)
if (vc5->clk_mux_ins == VC5_MUX_IN_XIN)
src = VC5_PRIM_SRC_SHDN_EN_XTAL;
- if (vc5->clk_mux_ins == VC5_MUX_IN_CLKIN)
+ else if (vc5->clk_mux_ins == VC5_MUX_IN_CLKIN)
src = VC5_PRIM_SRC_SHDN_EN_CLKIN;
+ else /* Invalid; should have been caught by vc5_probe() */
+ return -EINVAL;
}
return regmap_update_bits(vc5->regmap, VC5_PRIM_SRC_SHDN, mask, src);
--
2.19.1
From: Zeng Tao <[email protected]>
[ Upstream commit 88b1bb1f3b88e0bf20b05d543a53a5b99bd7ceb6 ]
Currently the link_state is uninitialized and the default value is 0(U0)
before the first time we start the udc, and after we start the udc then
stop the udc, the link_state will be undefined.
We may have the following warnings if we start the udc again with
an undefined link_state:
WARNING: CPU: 0 PID: 327 at drivers/usb/dwc3/gadget.c:294 dwc3_send_gadget_ep_cmd+0x304/0x308
dwc3 100e0000.hidwc3_0: wakeup failed --> -22
[...]
Call Trace:
[<c010f270>] (unwind_backtrace) from [<c010b3d8>] (show_stack+0x10/0x14)
[<c010b3d8>] (show_stack) from [<c034a4dc>] (dump_stack+0x84/0x98)
[<c034a4dc>] (dump_stack) from [<c0118000>] (__warn+0xe8/0x100)
[<c0118000>] (__warn) from [<c0118050>](warn_slowpath_fmt+0x38/0x48)
[<c0118050>] (warn_slowpath_fmt) from [<c0442ec0>](dwc3_send_gadget_ep_cmd+0x304/0x308)
[<c0442ec0>] (dwc3_send_gadget_ep_cmd) from [<c0445e68>](dwc3_ep0_start_trans+0x48/0xf4)
[<c0445e68>] (dwc3_ep0_start_trans) from [<c0446750>](dwc3_ep0_out_start+0x64/0x80)
[<c0446750>] (dwc3_ep0_out_start) from [<c04451c0>](__dwc3_gadget_start+0x1e0/0x278)
[<c04451c0>] (__dwc3_gadget_start) from [<c04452e0>](dwc3_gadget_start+0x88/0x10c)
[<c04452e0>] (dwc3_gadget_start) from [<c045ee54>](udc_bind_to_driver+0x88/0xbc)
[<c045ee54>] (udc_bind_to_driver) from [<c045f29c>](usb_gadget_probe_driver+0xf8/0x140)
[<c045f29c>] (usb_gadget_probe_driver) from [<bf005424>](gadget_dev_desc_UDC_store+0xac/0xc4 [libcomposite])
[<bf005424>] (gadget_dev_desc_UDC_store [libcomposite]) from[<c023d8e0>] (configfs_write_file+0xd4/0x160)
[<c023d8e0>] (configfs_write_file) from [<c01d51e8>] (__vfs_write+0x1c/0x114)
[<c01d51e8>] (__vfs_write) from [<c01d5ff4>] (vfs_write+0xa4/0x168)
[<c01d5ff4>] (vfs_write) from [<c01d6d40>] (SyS_write+0x3c/0x90)
[<c01d6d40>] (SyS_write) from [<c0107400>] (ret_fast_syscall+0x0/0x3c)
Signed-off-by: Zeng Tao <[email protected]>
Signed-off-by: Felipe Balbi <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/usb/dwc3/gadget.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index f51527c8925b..2fa9685d526a 100644
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -1869,6 +1869,7 @@ static int __dwc3_gadget_start(struct dwc3 *dwc)
/* begin to receive SETUP packets */
dwc->ep0state = EP0_SETUP_PHASE;
+ dwc->link_state = DWC3_LINK_STATE_SS_DIS;
dwc3_ep0_out_start(dwc);
dwc3_gadget_enable_irq(dwc);
--
2.19.1
From: Bo He <[email protected]>
[ Upstream commit 01c10880d24291a96a4ab0da773e3c5ce4d12da8 ]
We see dwc3 endpoint stopped by unwanted irq during
suspend resume test, which is caused dwc3 ep can't be started
with error "No Resource".
Here, add synchronize_irq before suspend to sync the
pending IRQ handlers complete.
Signed-off-by: Bo He <[email protected]>
Signed-off-by: Yu Wang <[email protected]>
Signed-off-by: Felipe Balbi <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/usb/dwc3/gadget.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index 2a4ea9a1b1e3..f51527c8925b 100644
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -3279,6 +3279,8 @@ int dwc3_gadget_suspend(struct dwc3 *dwc)
dwc3_disconnect_gadget(dwc);
__dwc3_gadget_stop(dwc);
+ synchronize_irq(dwc->irq_gadget);
+
return 0;
}
--
2.19.1
From: Alexandre Belloni <[email protected]>
[ Upstream commit fdac94489c4d247088b3885875b39b3e1eb621ef ]
Return values for select are not checked properly and timeouts may not be
detected.
Signed-off-by: Alexandre Belloni <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
tools/testing/selftests/rtc/rtctest.c | 7 ++-----
1 file changed, 2 insertions(+), 5 deletions(-)
diff --git a/tools/testing/selftests/rtc/rtctest.c b/tools/testing/selftests/rtc/rtctest.c
index e20b017e7073..dea4e3d6d9e1 100644
--- a/tools/testing/selftests/rtc/rtctest.c
+++ b/tools/testing/selftests/rtc/rtctest.c
@@ -145,15 +145,12 @@ TEST_F(rtc, alarm_alm_set) {
rc = select(self->fd + 1, &readfds, NULL, NULL, &tv);
ASSERT_NE(-1, rc);
- EXPECT_NE(0, rc);
+ ASSERT_NE(0, rc);
/* Disable alarm interrupts */
rc = ioctl(self->fd, RTC_AIE_OFF, 0);
ASSERT_NE(-1, rc);
- if (rc == 0)
- return;
-
rc = read(self->fd, &data, sizeof(unsigned long));
ASSERT_NE(-1, rc);
TH_LOG("data: %lx", data);
@@ -202,7 +199,7 @@ TEST_F(rtc, alarm_wkalm_set) {
rc = select(self->fd + 1, &readfds, NULL, NULL, &tv);
ASSERT_NE(-1, rc);
- EXPECT_NE(0, rc);
+ ASSERT_NE(0, rc);
rc = read(self->fd, &data, sizeof(unsigned long));
ASSERT_NE(-1, rc);
--
2.19.1
From: Peng Hao <[email protected]>
[ Upstream commit bf7d28c53453ea904584960de55e33e03b9d93b1 ]
Using sizeof(pointer) for determining the size of a memset() only works
when the size of the pointer and the size of type to which it points are
the same. For pte_t this is only true for 64bit and 32bit-NONPAE. On 32bit
PAE systems this is wrong as the pointer size is 4 byte but the PTE entry
is 8 bytes. It's actually not a real world issue as this code depends on
64bit, but it's wrong nevertheless.
Use sizeof(*p) for correctness sake.
Fixes: aad983913d77 ("x86/mm/encrypt: Simplify sme_populate_pgd() and sme_populate_pgd_large()")
Signed-off-by: Peng Hao <[email protected]>
Signed-off-by: Thomas Gleixner <[email protected]>
Cc: Kirill A. Shutemov <[email protected]>
Cc: Tom Lendacky <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
arch/x86/mm/mem_encrypt_identity.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/x86/mm/mem_encrypt_identity.c b/arch/x86/mm/mem_encrypt_identity.c
index a19ef1a416ff..4aa9b1480866 100644
--- a/arch/x86/mm/mem_encrypt_identity.c
+++ b/arch/x86/mm/mem_encrypt_identity.c
@@ -158,8 +158,8 @@ static void __init sme_populate_pgd(struct sme_populate_pgd_data *ppd)
pmd = pmd_offset(pud, ppd->vaddr);
if (pmd_none(*pmd)) {
pte = ppd->pgtable_area;
- memset(pte, 0, sizeof(pte) * PTRS_PER_PTE);
- ppd->pgtable_area += sizeof(pte) * PTRS_PER_PTE;
+ memset(pte, 0, sizeof(*pte) * PTRS_PER_PTE);
+ ppd->pgtable_area += sizeof(*pte) * PTRS_PER_PTE;
set_pmd(pmd, __pmd(PMD_FLAGS | __pa(pte)));
}
--
2.19.1
From: Yang Yingliang <[email protected]>
[ Upstream commit c530bb8a726a37811e9fb5d68cd6b5408173b545 ]
The mbi_lock mutex is left uninitialized, so let's use DEFINE_MUTEX
to initialize it statically.
Fixes: 505287525c24d ("irqchip/gic-v3: Add support for Message Based Interrupts as an MSI controller")
Signed-off-by: Yang Yingliang <[email protected]>
Signed-off-by: Marc Zyngier <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/irqchip/irq-gic-v3-mbi.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/irqchip/irq-gic-v3-mbi.c b/drivers/irqchip/irq-gic-v3-mbi.c
index ad70e7c416e3..fbfa7ff6deb1 100644
--- a/drivers/irqchip/irq-gic-v3-mbi.c
+++ b/drivers/irqchip/irq-gic-v3-mbi.c
@@ -24,7 +24,7 @@ struct mbi_range {
unsigned long *bm;
};
-static struct mutex mbi_lock;
+static DEFINE_MUTEX(mbi_lock);
static phys_addr_t mbi_phys_base;
static struct mbi_range *mbi_ranges;
static unsigned int mbi_range_nr;
--
2.19.1
From: Aaron Hill <[email protected]>
[ Upstream commit 129699bb8c7572106b5bbb2407c2daee4727ccad ]
Changes since V1:
* Use dev_info instead of printk
* Use dev_warn instead of BUG_ON
Previously, sysfs_create_group was called before all initialization had
fully run - specifically, before pci_set_drvdata was called. Since the
sysctl group is visible to userspace as soon as sysfs_create_group
returns, a small window of time existed during which a process could read
from an uninitialized/partially-initialized device.
This commit moves the creation of the sysctl group to after all
initialized is completed. This ensures that it's impossible for
userspace to read from a sysctl file before initialization has fully
completed.
To catch any future regressions, I've added a check to ensure
that proc_thermal_emum_mode is never PROC_THERMAL_NONE when a process
tries to read from a sysctl file. Previously, the aforementioned race
condition could result in the 'else' branch
running while PROC_THERMAL_NONE was set,
leading to a null pointer deference.
Signed-off-by: Aaron Hill <[email protected]>
Signed-off-by: Zhang Rui <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
.../processor_thermal_device.c | 28 ++++++++++---------
1 file changed, 15 insertions(+), 13 deletions(-)
diff --git a/drivers/thermal/int340x_thermal/processor_thermal_device.c b/drivers/thermal/int340x_thermal/processor_thermal_device.c
index 8e0f665cf06f..8e1cf4d789be 100644
--- a/drivers/thermal/int340x_thermal/processor_thermal_device.c
+++ b/drivers/thermal/int340x_thermal/processor_thermal_device.c
@@ -84,7 +84,12 @@ static ssize_t power_limit_##index##_##suffix##_show(struct device *dev, \
struct pci_dev *pci_dev; \
struct platform_device *pdev; \
struct proc_thermal_device *proc_dev; \
-\
+ \
+ if (proc_thermal_emum_mode == PROC_THERMAL_NONE) { \
+ dev_warn(dev, "Attempted to get power limit before device was initialized!\n"); \
+ return 0; \
+ } \
+ \
if (proc_thermal_emum_mode == PROC_THERMAL_PLATFORM_DEV) { \
pdev = to_platform_device(dev); \
proc_dev = platform_get_drvdata(pdev); \
@@ -298,11 +303,6 @@ static int proc_thermal_add(struct device *dev,
*priv = proc_priv;
ret = proc_thermal_read_ppcc(proc_priv);
- if (!ret) {
- ret = sysfs_create_group(&dev->kobj,
- &power_limit_attribute_group);
-
- }
if (ret)
return ret;
@@ -316,8 +316,7 @@ static int proc_thermal_add(struct device *dev,
proc_priv->int340x_zone = int340x_thermal_zone_add(adev, ops);
if (IS_ERR(proc_priv->int340x_zone)) {
- ret = PTR_ERR(proc_priv->int340x_zone);
- goto remove_group;
+ return PTR_ERR(proc_priv->int340x_zone);
} else
ret = 0;
@@ -331,9 +330,6 @@ static int proc_thermal_add(struct device *dev,
remove_zone:
int340x_thermal_zone_remove(proc_priv->int340x_zone);
-remove_group:
- sysfs_remove_group(&proc_priv->dev->kobj,
- &power_limit_attribute_group);
return ret;
}
@@ -364,7 +360,10 @@ static int int3401_add(struct platform_device *pdev)
platform_set_drvdata(pdev, proc_priv);
proc_thermal_emum_mode = PROC_THERMAL_PLATFORM_DEV;
- return 0;
+ dev_info(&pdev->dev, "Creating sysfs group for PROC_THERMAL_PLATFORM_DEV\n");
+
+ return sysfs_create_group(&pdev->dev.kobj,
+ &power_limit_attribute_group);
}
static int int3401_remove(struct platform_device *pdev)
@@ -441,7 +440,10 @@ static int proc_thermal_pci_probe(struct pci_dev *pdev,
dev_err(&pdev->dev, "No auxiliary DTSs enabled\n");
}
- return 0;
+ dev_info(&pdev->dev, "Creating sysfs group for PROC_THERMAL_PCI\n");
+
+ return sysfs_create_group(&pdev->dev.kobj,
+ &power_limit_attribute_group);
}
static void proc_thermal_pci_remove(struct pci_dev *pdev)
--
2.19.1
From: Bob Copeland <[email protected]>
[ Upstream commit a0dc02039a2ee54fb4ae400e0b755ed30e73e58c ]
In ieee80211_rx_h_mesh_fwding, we increment the 'dropped_frames_ttl'
counter when we decrement the ttl to zero. For unicast frames
destined for other hosts, we stop processing the frame at that point.
For multicast frames, we do not rebroadcast it in this case, but we
do pass the frame up the stack to process it on this STA. That
doesn't match the usual definition of "dropped," so don't count
those as such.
With this change, something like `ping6 -i0.2 ff02::1%mesh0` from a
peer in a ttl=1 network no longer increments the counter rapidly.
Signed-off-by: Bob Copeland <[email protected]>
Signed-off-by: Johannes Berg <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/mac80211/rx.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/net/mac80211/rx.c b/net/mac80211/rx.c
index 428f7ad5f9b5..ef215d0e99b0 100644
--- a/net/mac80211/rx.c
+++ b/net/mac80211/rx.c
@@ -2710,7 +2710,9 @@ ieee80211_rx_h_mesh_fwding(struct ieee80211_rx_data *rx)
skb_set_queue_mapping(skb, q);
if (!--mesh_hdr->ttl) {
- IEEE80211_IFSTA_MESH_CTR_INC(ifmsh, dropped_frames_ttl);
+ if (!is_multicast_ether_addr(hdr->addr1))
+ IEEE80211_IFSTA_MESH_CTR_INC(ifmsh,
+ dropped_frames_ttl);
goto out;
}
--
2.19.1
From: Ilya Dryomov <[email protected]>
[ Upstream commit 4aac9228d16458cedcfd90c7fb37211cf3653ac3 ]
con_fault() can transition the connection into STANDBY right after
ceph_con_keepalive() clears STANDBY in clear_standby():
libceph user thread ceph-msgr worker
ceph_con_keepalive()
mutex_lock(&con->mutex)
clear_standby(con)
mutex_unlock(&con->mutex)
mutex_lock(&con->mutex)
con_fault()
...
if KEEPALIVE_PENDING isn't set
set state to STANDBY
...
mutex_unlock(&con->mutex)
set KEEPALIVE_PENDING
set WRITE_PENDING
This triggers warnings in clear_standby() when either ceph_con_send()
or ceph_con_keepalive() get to clearing STANDBY next time.
I don't see a reason to condition queue_con() call on the previous
value of KEEPALIVE_PENDING, so move the setting of KEEPALIVE_PENDING
into the critical section -- unlike WRITE_PENDING, KEEPALIVE_PENDING
could have been a non-atomic flag.
Reported-by: [email protected]
Signed-off-by: Ilya Dryomov <[email protected]>
Tested-by: Myungho Jung <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/ceph/messenger.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/net/ceph/messenger.c b/net/ceph/messenger.c
index 2f126eff275d..664f886f464d 100644
--- a/net/ceph/messenger.c
+++ b/net/ceph/messenger.c
@@ -3219,9 +3219,10 @@ void ceph_con_keepalive(struct ceph_connection *con)
dout("con_keepalive %p\n", con);
mutex_lock(&con->mutex);
clear_standby(con);
+ con_flag_set(con, CON_FLAG_KEEPALIVE_PENDING);
mutex_unlock(&con->mutex);
- if (con_flag_test_and_set(con, CON_FLAG_KEEPALIVE_PENDING) == 0 &&
- con_flag_test_and_set(con, CON_FLAG_WRITE_PENDING) == 0)
+
+ if (con_flag_test_and_set(con, CON_FLAG_WRITE_PENDING) == 0)
queue_con(con);
}
EXPORT_SYMBOL(ceph_con_keepalive);
--
2.19.1
From: Kenneth Feng <[email protected]>
[ Upstream commit 6d87dc97eb3341de3f7b1efa3156cb0e014f4a96 ]
gfxclk for OD setting is limited to 1980M for non-acg
ASICs of Vega10
Signed-off-by: Kenneth Feng <[email protected]>
Reviewed-by: Evan Quan <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
.../powerplay/hwmgr/vega10_processpptables.c | 22 ++++++++++++++++++-
1 file changed, 21 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/amd/powerplay/hwmgr/vega10_processpptables.c b/drivers/gpu/drm/amd/powerplay/hwmgr/vega10_processpptables.c
index b8747a5c9204..99d596dc0e89 100644
--- a/drivers/gpu/drm/amd/powerplay/hwmgr/vega10_processpptables.c
+++ b/drivers/gpu/drm/amd/powerplay/hwmgr/vega10_processpptables.c
@@ -32,6 +32,7 @@
#include "vega10_pptable.h"
#define NUM_DSPCLK_LEVELS 8
+#define VEGA10_ENGINECLOCK_HARDMAX 198000
static void set_hw_cap(struct pp_hwmgr *hwmgr, bool enable,
enum phm_platform_caps cap)
@@ -258,7 +259,26 @@ static int init_over_drive_limits(
struct pp_hwmgr *hwmgr,
const ATOM_Vega10_POWERPLAYTABLE *powerplay_table)
{
- hwmgr->platform_descriptor.overdriveLimit.engineClock =
+ const ATOM_Vega10_GFXCLK_Dependency_Table *gfxclk_dep_table =
+ (const ATOM_Vega10_GFXCLK_Dependency_Table *)
+ (((unsigned long) powerplay_table) +
+ le16_to_cpu(powerplay_table->usGfxclkDependencyTableOffset));
+ bool is_acg_enabled = false;
+ ATOM_Vega10_GFXCLK_Dependency_Record_V2 *patom_record_v2;
+
+ if (gfxclk_dep_table->ucRevId == 1) {
+ patom_record_v2 =
+ (ATOM_Vega10_GFXCLK_Dependency_Record_V2 *)gfxclk_dep_table->entries;
+ is_acg_enabled =
+ (bool)patom_record_v2[gfxclk_dep_table->ucNumEntries-1].ucACGEnable;
+ }
+
+ if (powerplay_table->ulMaxODEngineClock > VEGA10_ENGINECLOCK_HARDMAX &&
+ !is_acg_enabled)
+ hwmgr->platform_descriptor.overdriveLimit.engineClock =
+ VEGA10_ENGINECLOCK_HARDMAX;
+ else
+ hwmgr->platform_descriptor.overdriveLimit.engineClock =
le32_to_cpu(powerplay_table->ulMaxODEngineClock);
hwmgr->platform_descriptor.overdriveLimit.memoryClock =
le32_to_cpu(powerplay_table->ulMaxODMemoryClock);
--
2.19.1
From: Ming Lei <[email protected]>
[ Upstream commit 698cef173983b086977e633e46476e0f925ca01e ]
Except for blk_queue_split(), bio_split() is used for splitting bio too,
then the remained bio is often resubmit to queue via generic_make_request().
So the same queue enter recursion exits in this case too. Unfortunatley
commit cd4a4ae4683dc2 doesn't help this case.
This patch covers the above case by setting BIO_QUEUE_ENTERED before calling
q->make_request_fn.
In theory the per-bio flag is used to simulate one stack variable, it is
just fine to clear it after q->make_request_fn is returned. Especially
the same bio can't be submitted from another context.
Fixes: cd4a4ae4683dc2 ("block: don't use blocking queue entered for recursive bio submits")
Cc: Tetsuo Handa <[email protected]>
Cc: NeilBrown <[email protected]>
Reviewed-by: Mike Snitzer <[email protected]>
Signed-off-by: Ming Lei <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
block/blk-core.c | 11 +++++++++++
block/blk-merge.c | 10 ----------
2 files changed, 11 insertions(+), 10 deletions(-)
diff --git a/block/blk-core.c b/block/blk-core.c
index deb56932f8c4..22260339f66f 100644
--- a/block/blk-core.c
+++ b/block/blk-core.c
@@ -2449,7 +2449,18 @@ blk_qc_t generic_make_request(struct bio *bio)
/* Create a fresh bio_list for all subordinate requests */
bio_list_on_stack[1] = bio_list_on_stack[0];
bio_list_init(&bio_list_on_stack[0]);
+
+ /*
+ * Since we're recursing into make_request here, ensure
+ * that we mark this bio as already having entered the queue.
+ * If not, and the queue is going away, we can get stuck
+ * forever on waiting for the queue reference to drop. But
+ * that will never happen, as we're already holding a
+ * reference to it.
+ */
+ bio_set_flag(bio, BIO_QUEUE_ENTERED);
ret = q->make_request_fn(q, bio);
+ bio_clear_flag(bio, BIO_QUEUE_ENTERED);
/* sort new bios into those for a lower level
* and those for the same level
diff --git a/block/blk-merge.c b/block/blk-merge.c
index 7695034f4b87..adfe835ab258 100644
--- a/block/blk-merge.c
+++ b/block/blk-merge.c
@@ -272,16 +272,6 @@ void blk_queue_split(struct request_queue *q, struct bio **bio)
/* there isn't chance to merge the splitted bio */
split->bi_opf |= REQ_NOMERGE;
- /*
- * Since we're recursing into make_request here, ensure
- * that we mark this bio as already having entered the queue.
- * If not, and the queue is going away, we can get stuck
- * forever on waiting for the queue reference to drop. But
- * that will never happen, as we're already holding a
- * reference to it.
- */
- bio_set_flag(*bio, BIO_QUEUE_ENTERED);
-
bio_chain(split, *bio);
trace_block_split(q, split, (*bio)->bi_iter.bi_sector);
generic_make_request(*bio);
--
2.19.1
From: Eric Dumazet <[email protected]>
[ Upstream commit 63530aba7826a0f8e129874df9c4d264f9db3f9e ]
syzbot found that ax25 routes where not properly protected
against concurrent use [1].
In this particular report the bug happened while
copying ax25->digipeat.
Fix this problem by making sure we call ax25_get_route()
while ax25_route_lock is held, so that no modification
could happen while using the route.
The current two ax25_get_route() callers do not sleep,
so this change should be fine.
Once we do that, ax25_get_route() no longer needs to
grab a reference on the found route.
[1]
ax25_connect(): syz-executor0 uses autobind, please contact [email protected]
BUG: KASAN: use-after-free in memcpy include/linux/string.h:352 [inline]
BUG: KASAN: use-after-free in kmemdup+0x42/0x60 mm/util.c:113
Read of size 66 at addr ffff888066641a80 by task syz-executor2/531
ax25_connect(): syz-executor0 uses autobind, please contact [email protected]
CPU: 1 PID: 531 Comm: syz-executor2 Not tainted 5.0.0-rc2+ #10
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x1db/0x2d0 lib/dump_stack.c:113
print_address_description.cold+0x7c/0x20d mm/kasan/report.c:187
kasan_report.cold+0x1b/0x40 mm/kasan/report.c:317
check_memory_region_inline mm/kasan/generic.c:185 [inline]
check_memory_region+0x123/0x190 mm/kasan/generic.c:191
memcpy+0x24/0x50 mm/kasan/common.c:130
memcpy include/linux/string.h:352 [inline]
kmemdup+0x42/0x60 mm/util.c:113
kmemdup include/linux/string.h:425 [inline]
ax25_rt_autobind+0x25d/0x750 net/ax25/ax25_route.c:424
ax25_connect.cold+0x30/0xa4 net/ax25/af_ax25.c:1224
__sys_connect+0x357/0x490 net/socket.c:1664
__do_sys_connect net/socket.c:1675 [inline]
__se_sys_connect net/socket.c:1672 [inline]
__x64_sys_connect+0x73/0xb0 net/socket.c:1672
do_syscall_64+0x1a3/0x800 arch/x86/entry/common.c:290
entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x458099
Code: 6d b7 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 3b b7 fb ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:00007f870ee22c78 EFLAGS: 00000246 ORIG_RAX: 000000000000002a
RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 0000000000458099
RDX: 0000000000000048 RSI: 0000000020000080 RDI: 0000000000000005
RBP: 000000000073bf00 R08: 0000000000000000 R09: 0000000000000000
ax25_connect(): syz-executor4 uses autobind, please contact [email protected]
R10: 0000000000000000 R11: 0000000000000246 R12: 00007f870ee236d4
R13: 00000000004be48e R14: 00000000004ce9a8 R15: 00000000ffffffff
Allocated by task 526:
save_stack+0x45/0xd0 mm/kasan/common.c:73
set_track mm/kasan/common.c:85 [inline]
__kasan_kmalloc mm/kasan/common.c:496 [inline]
__kasan_kmalloc.constprop.0+0xcf/0xe0 mm/kasan/common.c:469
kasan_kmalloc+0x9/0x10 mm/kasan/common.c:504
ax25_connect(): syz-executor5 uses autobind, please contact [email protected]
kmem_cache_alloc_trace+0x151/0x760 mm/slab.c:3609
kmalloc include/linux/slab.h:545 [inline]
ax25_rt_add net/ax25/ax25_route.c:95 [inline]
ax25_rt_ioctl+0x3b9/0x1270 net/ax25/ax25_route.c:233
ax25_ioctl+0x322/0x10b0 net/ax25/af_ax25.c:1763
sock_do_ioctl+0xe2/0x400 net/socket.c:950
sock_ioctl+0x32f/0x6c0 net/socket.c:1074
vfs_ioctl fs/ioctl.c:46 [inline]
file_ioctl fs/ioctl.c:509 [inline]
do_vfs_ioctl+0x107b/0x17d0 fs/ioctl.c:696
ksys_ioctl+0xab/0xd0 fs/ioctl.c:713
__do_sys_ioctl fs/ioctl.c:720 [inline]
__se_sys_ioctl fs/ioctl.c:718 [inline]
__x64_sys_ioctl+0x73/0xb0 fs/ioctl.c:718
do_syscall_64+0x1a3/0x800 arch/x86/entry/common.c:290
entry_SYSCALL_64_after_hwframe+0x49/0xbe
ax25_connect(): syz-executor5 uses autobind, please contact [email protected]
Freed by task 550:
save_stack+0x45/0xd0 mm/kasan/common.c:73
set_track mm/kasan/common.c:85 [inline]
__kasan_slab_free+0x102/0x150 mm/kasan/common.c:458
kasan_slab_free+0xe/0x10 mm/kasan/common.c:466
__cache_free mm/slab.c:3487 [inline]
kfree+0xcf/0x230 mm/slab.c:3806
ax25_rt_add net/ax25/ax25_route.c:92 [inline]
ax25_rt_ioctl+0x304/0x1270 net/ax25/ax25_route.c:233
ax25_ioctl+0x322/0x10b0 net/ax25/af_ax25.c:1763
sock_do_ioctl+0xe2/0x400 net/socket.c:950
sock_ioctl+0x32f/0x6c0 net/socket.c:1074
vfs_ioctl fs/ioctl.c:46 [inline]
file_ioctl fs/ioctl.c:509 [inline]
do_vfs_ioctl+0x107b/0x17d0 fs/ioctl.c:696
ksys_ioctl+0xab/0xd0 fs/ioctl.c:713
__do_sys_ioctl fs/ioctl.c:720 [inline]
__se_sys_ioctl fs/ioctl.c:718 [inline]
__x64_sys_ioctl+0x73/0xb0 fs/ioctl.c:718
do_syscall_64+0x1a3/0x800 arch/x86/entry/common.c:290
entry_SYSCALL_64_after_hwframe+0x49/0xbe
The buggy address belongs to the object at ffff888066641a80
which belongs to the cache kmalloc-96 of size 96
The buggy address is located 0 bytes inside of
96-byte region [ffff888066641a80, ffff888066641ae0)
The buggy address belongs to the page:
page:ffffea0001999040 count:1 mapcount:0 mapping:ffff88812c3f04c0 index:0x0
flags: 0x1fffc0000000200(slab)
ax25_connect(): syz-executor4 uses autobind, please contact [email protected]
raw: 01fffc0000000200 ffffea0001817948 ffffea0002341dc8 ffff88812c3f04c0
raw: 0000000000000000 ffff888066641000 0000000100000020 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff888066641980: fb fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc
ffff888066641a00: 00 00 00 00 00 00 00 00 02 fc fc fc fc fc fc fc
>ffff888066641a80: fb fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc
^
ffff888066641b00: fb fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc
ffff888066641b80: 00 00 00 00 00 00 00 00 00 00 00 00 fc fc fc fc
Signed-off-by: Eric Dumazet <[email protected]>
Cc: Ralf Baechle <[email protected]>
Reported-by: syzbot <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
include/net/ax25.h | 12 ++++++++++++
net/ax25/ax25_ip.c | 4 ++--
net/ax25/ax25_route.c | 19 ++++++++-----------
3 files changed, 22 insertions(+), 13 deletions(-)
diff --git a/include/net/ax25.h b/include/net/ax25.h
index 3f9aea8087e3..8b7eb46ad72d 100644
--- a/include/net/ax25.h
+++ b/include/net/ax25.h
@@ -201,6 +201,18 @@ static inline void ax25_hold_route(ax25_route *ax25_rt)
void __ax25_put_route(ax25_route *ax25_rt);
+extern rwlock_t ax25_route_lock;
+
+static inline void ax25_route_lock_use(void)
+{
+ read_lock(&ax25_route_lock);
+}
+
+static inline void ax25_route_lock_unuse(void)
+{
+ read_unlock(&ax25_route_lock);
+}
+
static inline void ax25_put_route(ax25_route *ax25_rt)
{
if (refcount_dec_and_test(&ax25_rt->refcount))
diff --git a/net/ax25/ax25_ip.c b/net/ax25/ax25_ip.c
index 70417e9b932d..314bbc8010fb 100644
--- a/net/ax25/ax25_ip.c
+++ b/net/ax25/ax25_ip.c
@@ -114,6 +114,7 @@ netdev_tx_t ax25_ip_xmit(struct sk_buff *skb)
dst = (ax25_address *)(bp + 1);
src = (ax25_address *)(bp + 8);
+ ax25_route_lock_use();
route = ax25_get_route(dst, NULL);
if (route) {
digipeat = route->digipeat;
@@ -206,9 +207,8 @@ netdev_tx_t ax25_ip_xmit(struct sk_buff *skb)
ax25_queue_xmit(skb, dev);
put:
- if (route)
- ax25_put_route(route);
+ ax25_route_lock_unuse();
return NETDEV_TX_OK;
}
diff --git a/net/ax25/ax25_route.c b/net/ax25/ax25_route.c
index a0eff323af12..66f74c85cf6b 100644
--- a/net/ax25/ax25_route.c
+++ b/net/ax25/ax25_route.c
@@ -40,7 +40,7 @@
#include <linux/export.h>
static ax25_route *ax25_route_list;
-static DEFINE_RWLOCK(ax25_route_lock);
+DEFINE_RWLOCK(ax25_route_lock);
void ax25_rt_device_down(struct net_device *dev)
{
@@ -335,6 +335,7 @@ const struct seq_operations ax25_rt_seqops = {
* Find AX.25 route
*
* Only routes with a reference count of zero can be destroyed.
+ * Must be called with ax25_route_lock read locked.
*/
ax25_route *ax25_get_route(ax25_address *addr, struct net_device *dev)
{
@@ -342,7 +343,6 @@ ax25_route *ax25_get_route(ax25_address *addr, struct net_device *dev)
ax25_route *ax25_def_rt = NULL;
ax25_route *ax25_rt;
- read_lock(&ax25_route_lock);
/*
* Bind to the physical interface we heard them on, or the default
* route if none is found;
@@ -365,11 +365,6 @@ ax25_route *ax25_get_route(ax25_address *addr, struct net_device *dev)
if (ax25_spe_rt != NULL)
ax25_rt = ax25_spe_rt;
- if (ax25_rt != NULL)
- ax25_hold_route(ax25_rt);
-
- read_unlock(&ax25_route_lock);
-
return ax25_rt;
}
@@ -400,9 +395,12 @@ int ax25_rt_autobind(ax25_cb *ax25, ax25_address *addr)
ax25_route *ax25_rt;
int err = 0;
- if ((ax25_rt = ax25_get_route(addr, NULL)) == NULL)
+ ax25_route_lock_use();
+ ax25_rt = ax25_get_route(addr, NULL);
+ if (!ax25_rt) {
+ ax25_route_lock_unuse();
return -EHOSTUNREACH;
-
+ }
if ((ax25->ax25_dev = ax25_dev_ax25dev(ax25_rt->dev)) == NULL) {
err = -EHOSTUNREACH;
goto put;
@@ -437,8 +435,7 @@ int ax25_rt_autobind(ax25_cb *ax25, ax25_address *addr)
}
put:
- ax25_put_route(ax25_rt);
-
+ ax25_route_lock_unuse();
return err;
}
--
2.19.1
From: Colin Ian King <[email protected]>
[ Upstream commit 73aaf920cc72024c4a4460cfa46d56e5014172f3 ]
The call to SMB2_queary_acl can allocate memory to pntsd and also
return a failure via a call to SMB2_query_acl (and then query_info).
This occurs when query_info allocates the structure and then in
query_info the call to smb2_validate_and_copy_iov fails. Currently the
failure just returns without kfree'ing pntsd hence causing a memory
leak.
Currently, *data is allocated if it's not already pointing to a buffer,
so it needs to be kfree'd only if was allocated in query_info, so the
fix adds an allocated flag to track this. Also set *dlen to zero on
an error just to be safe since *data is kfree'd.
Also set errno to -ENOMEM if the allocation of *data fails.
Signed-off-by: Colin Ian King <[email protected]>
Signed-off-by: Steve French <[email protected]>
Reviewed-by: Dan Carpener <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/cifs/smb2pdu.c | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/fs/cifs/smb2pdu.c b/fs/cifs/smb2pdu.c
index c393ac255af7..d1ae7cdb236d 100644
--- a/fs/cifs/smb2pdu.c
+++ b/fs/cifs/smb2pdu.c
@@ -2714,6 +2714,7 @@ query_info(const unsigned int xid, struct cifs_tcon *tcon,
int resp_buftype = CIFS_NO_BUFFER;
struct cifs_ses *ses = tcon->ses;
int flags = 0;
+ bool allocated = false;
cifs_dbg(FYI, "Query Info\n");
@@ -2753,14 +2754,21 @@ query_info(const unsigned int xid, struct cifs_tcon *tcon,
"Error %d allocating memory for acl\n",
rc);
*dlen = 0;
+ rc = -ENOMEM;
goto qinf_exit;
}
+ allocated = true;
}
}
rc = smb2_validate_and_copy_iov(le16_to_cpu(rsp->OutputBufferOffset),
le32_to_cpu(rsp->OutputBufferLength),
&rsp_iov, min_len, *data);
+ if (rc && allocated) {
+ kfree(*data);
+ *data = NULL;
+ *dlen = 0;
+ }
qinf_exit:
SMB2_query_info_free(&rqst);
--
2.19.1
From: Tejun Heo <[email protected]>
[ Upstream commit 7fc5854f8c6efae9e7624970ab49a1eac2faefb1 ]
sync_inodes_sb() can race against cgwb (cgroup writeback) membership
switches and fail to writeback some inodes. For example, if an inode
switches to another wb while sync_inodes_sb() is in progress, the new
wb might not be visible to bdi_split_work_to_wbs() at all or the inode
might jump from a wb which hasn't issued writebacks yet to one which
already has.
This patch adds backing_dev_info->wb_switch_rwsem to synchronize cgwb
switch path against sync_inodes_sb() so that sync_inodes_sb() is
guaranteed to see all the target wbs and inodes can't jump wbs to
escape syncing.
v2: Fixed misplaced rwsem init. Spotted by Jiufei.
Signed-off-by: Tejun Heo <[email protected]>
Reported-by: Jiufei Xue <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Acked-by: Jan Kara <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/fs-writeback.c | 40 ++++++++++++++++++++++++++++++--
include/linux/backing-dev-defs.h | 1 +
mm/backing-dev.c | 1 +
3 files changed, 40 insertions(+), 2 deletions(-)
diff --git a/fs/fs-writeback.c b/fs/fs-writeback.c
index b40168fcc94a..36855c1f8daf 100644
--- a/fs/fs-writeback.c
+++ b/fs/fs-writeback.c
@@ -331,11 +331,22 @@ struct inode_switch_wbs_context {
struct work_struct work;
};
+static void bdi_down_write_wb_switch_rwsem(struct backing_dev_info *bdi)
+{
+ down_write(&bdi->wb_switch_rwsem);
+}
+
+static void bdi_up_write_wb_switch_rwsem(struct backing_dev_info *bdi)
+{
+ up_write(&bdi->wb_switch_rwsem);
+}
+
static void inode_switch_wbs_work_fn(struct work_struct *work)
{
struct inode_switch_wbs_context *isw =
container_of(work, struct inode_switch_wbs_context, work);
struct inode *inode = isw->inode;
+ struct backing_dev_info *bdi = inode_to_bdi(inode);
struct address_space *mapping = inode->i_mapping;
struct bdi_writeback *old_wb = inode->i_wb;
struct bdi_writeback *new_wb = isw->new_wb;
@@ -343,6 +354,12 @@ static void inode_switch_wbs_work_fn(struct work_struct *work)
struct page *page;
bool switched = false;
+ /*
+ * If @inode switches cgwb membership while sync_inodes_sb() is
+ * being issued, sync_inodes_sb() might miss it. Synchronize.
+ */
+ down_read(&bdi->wb_switch_rwsem);
+
/*
* By the time control reaches here, RCU grace period has passed
* since I_WB_SWITCH assertion and all wb stat update transactions
@@ -428,6 +445,8 @@ static void inode_switch_wbs_work_fn(struct work_struct *work)
spin_unlock(&new_wb->list_lock);
spin_unlock(&old_wb->list_lock);
+ up_read(&bdi->wb_switch_rwsem);
+
if (switched) {
wb_wakeup(new_wb);
wb_put(old_wb);
@@ -468,9 +487,18 @@ static void inode_switch_wbs(struct inode *inode, int new_wb_id)
if (inode->i_state & I_WB_SWITCH)
return;
+ /*
+ * Avoid starting new switches while sync_inodes_sb() is in
+ * progress. Otherwise, if the down_write protected issue path
+ * blocks heavily, we might end up starting a large number of
+ * switches which will block on the rwsem.
+ */
+ if (!down_read_trylock(&bdi->wb_switch_rwsem))
+ return;
+
isw = kzalloc(sizeof(*isw), GFP_ATOMIC);
if (!isw)
- return;
+ goto out_unlock;
/* find and pin the new wb */
rcu_read_lock();
@@ -504,12 +532,14 @@ static void inode_switch_wbs(struct inode *inode, int new_wb_id)
* Let's continue after I_WB_SWITCH is guaranteed to be visible.
*/
call_rcu(&isw->rcu_head, inode_switch_wbs_rcu_fn);
- return;
+ goto out_unlock;
out_free:
if (isw->new_wb)
wb_put(isw->new_wb);
kfree(isw);
+out_unlock:
+ up_read(&bdi->wb_switch_rwsem);
}
/**
@@ -887,6 +917,9 @@ fs_initcall(cgroup_writeback_init);
#else /* CONFIG_CGROUP_WRITEBACK */
+static void bdi_down_write_wb_switch_rwsem(struct backing_dev_info *bdi) { }
+static void bdi_up_write_wb_switch_rwsem(struct backing_dev_info *bdi) { }
+
static struct bdi_writeback *
locked_inode_to_wb_and_lock_list(struct inode *inode)
__releases(&inode->i_lock)
@@ -2413,8 +2446,11 @@ void sync_inodes_sb(struct super_block *sb)
return;
WARN_ON(!rwsem_is_locked(&sb->s_umount));
+ /* protect against inode wb switch, see inode_switch_wbs_work_fn() */
+ bdi_down_write_wb_switch_rwsem(bdi);
bdi_split_work_to_wbs(bdi, &work, false);
wb_wait_for_completion(bdi, &done);
+ bdi_up_write_wb_switch_rwsem(bdi);
wait_sb_inodes(sb);
}
diff --git a/include/linux/backing-dev-defs.h b/include/linux/backing-dev-defs.h
index c31157135598..07e02d6df5ad 100644
--- a/include/linux/backing-dev-defs.h
+++ b/include/linux/backing-dev-defs.h
@@ -190,6 +190,7 @@ struct backing_dev_info {
struct radix_tree_root cgwb_tree; /* radix tree of active cgroup wbs */
struct rb_root cgwb_congested_tree; /* their congested states */
struct mutex cgwb_release_mutex; /* protect shutdown of wb structs */
+ struct rw_semaphore wb_switch_rwsem; /* no cgwb switch while syncing */
#else
struct bdi_writeback_congested *wb_congested;
#endif
diff --git a/mm/backing-dev.c b/mm/backing-dev.c
index 8a8bb8796c6c..72e6d0c55cfa 100644
--- a/mm/backing-dev.c
+++ b/mm/backing-dev.c
@@ -689,6 +689,7 @@ static int cgwb_bdi_init(struct backing_dev_info *bdi)
INIT_RADIX_TREE(&bdi->cgwb_tree, GFP_ATOMIC);
bdi->cgwb_congested_tree = RB_ROOT;
mutex_init(&bdi->cgwb_release_mutex);
+ init_rwsem(&bdi->wb_switch_rwsem);
ret = wb_init(&bdi->wb, bdi, 1, GFP_KERNEL);
if (!ret) {
--
2.19.1
From: Varun Prakash <[email protected]>
[ Upstream commit fe35a40e675473eb65f2f5462b82770f324b5689 ]
Assign fc_vport to ln->fc_vport before calling csio_fcoe_alloc_vnp() to
avoid a NULL pointer dereference in csio_vport_set_state().
ln->fc_vport is dereferenced in csio_vport_set_state().
Signed-off-by: Varun Prakash <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/scsi/csiostor/csio_attr.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/scsi/csiostor/csio_attr.c b/drivers/scsi/csiostor/csio_attr.c
index 8a004036e3d7..9bd2bd8dc2be 100644
--- a/drivers/scsi/csiostor/csio_attr.c
+++ b/drivers/scsi/csiostor/csio_attr.c
@@ -594,12 +594,12 @@ csio_vport_create(struct fc_vport *fc_vport, bool disable)
}
fc_vport_set_state(fc_vport, FC_VPORT_INITIALIZING);
+ ln->fc_vport = fc_vport;
if (csio_fcoe_alloc_vnp(hw, ln))
goto error;
*(struct csio_lnode **)fc_vport->dd_data = ln;
- ln->fc_vport = fc_vport;
if (!fc_vport->node_name)
fc_vport->node_name = wwn_to_u64(csio_ln_wwnn(ln));
if (!fc_vport->port_name)
--
2.19.1
From: Arnd Bergmann <[email protected]>
[ Upstream commit a840f690d3c6f2f27425ca7e7bd2d635cdec07d7 ]
drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c:368:13: error: 'dpu_plane_danger_signal_ctrl' defined but not used [-Werror=unused-function]
Fixes: 7b2e7adea732 ("drm/msm/dpu: Make dpu_plane_danger_signal_ctrl void")
Signed-off-by: Arnd Bergmann <[email protected]>
Signed-off-by: Anders Roxell <[email protected]>
Signed-off-by: Rob Clark <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c | 26 +++++++++++------------
1 file changed, 13 insertions(+), 13 deletions(-)
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c
index f549daf30fe6..1d155a7cb08c 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c
@@ -365,19 +365,6 @@ static void _dpu_plane_set_qos_ctrl(struct drm_plane *plane,
&pdpu->pipe_qos_cfg);
}
-static void dpu_plane_danger_signal_ctrl(struct drm_plane *plane, bool enable)
-{
- struct dpu_plane *pdpu = to_dpu_plane(plane);
- struct dpu_kms *dpu_kms = _dpu_plane_get_kms(plane);
-
- if (!pdpu->is_rt_pipe)
- return;
-
- pm_runtime_get_sync(&dpu_kms->pdev->dev);
- _dpu_plane_set_qos_ctrl(plane, enable, DPU_PLANE_QOS_PANIC_CTRL);
- pm_runtime_put_sync(&dpu_kms->pdev->dev);
-}
-
/**
* _dpu_plane_set_ot_limit - set OT limit for the given plane
* @plane: Pointer to drm plane
@@ -1271,6 +1258,19 @@ static void dpu_plane_reset(struct drm_plane *plane)
}
#ifdef CONFIG_DEBUG_FS
+static void dpu_plane_danger_signal_ctrl(struct drm_plane *plane, bool enable)
+{
+ struct dpu_plane *pdpu = to_dpu_plane(plane);
+ struct dpu_kms *dpu_kms = _dpu_plane_get_kms(plane);
+
+ if (!pdpu->is_rt_pipe)
+ return;
+
+ pm_runtime_get_sync(&dpu_kms->pdev->dev);
+ _dpu_plane_set_qos_ctrl(plane, enable, DPU_PLANE_QOS_PANIC_CTRL);
+ pm_runtime_put_sync(&dpu_kms->pdev->dev);
+}
+
static ssize_t _dpu_plane_danger_read(struct file *file,
char __user *buff, size_t count, loff_t *ppos)
{
--
2.19.1
From: Vitaly Kuznetsov <[email protected]>
[ Upstream commit 619ad846fc3452adaf71ca246c5aa711e2055398 ]
kvm-unit-tests' eventinj "NMI failing on IDT" test results in NMI being
delivered to the host (L1) when it's running nested. The problem seems to
be: svm_complete_interrupts() raises 'nmi_injected' flag but later we
decide to reflect EXIT_NPF to L1. The flag remains pending and we do NMI
injection upon entry so it got delivered to L1 instead of L2.
It seems that VMX code solves the same issue in prepare_vmcs12(), this was
introduced with code refactoring in commit 5f3d5799974b ("KVM: nVMX: Rework
event injection and recovery").
Signed-off-by: Vitaly Kuznetsov <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/x86/kvm/svm.c | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/arch/x86/kvm/svm.c b/arch/x86/kvm/svm.c
index cea8f8c03e8c..3411c32a8770 100644
--- a/arch/x86/kvm/svm.c
+++ b/arch/x86/kvm/svm.c
@@ -3401,6 +3401,14 @@ static int nested_svm_vmexit(struct vcpu_svm *svm)
kvm_mmu_reset_context(&svm->vcpu);
kvm_mmu_load(&svm->vcpu);
+ /*
+ * Drop what we picked up for L2 via svm_complete_interrupts() so it
+ * doesn't end up in L1.
+ */
+ svm->vcpu.arch.nmi_injected = false;
+ kvm_clear_exception_queue(&svm->vcpu);
+ kvm_clear_interrupt_queue(&svm->vcpu);
+
return 0;
}
--
2.19.1
From: Ben Gardon <[email protected]>
[ Upstream commit 94a980c39c8e3f8abaff5d3b5bbcd4ccf1c02c4f ]
Fix a call to userspace_mem_region_find to conform to its spec of
taking an inclusive, inclusive range. It was previously being called
with an inclusive, exclusive range. Also remove a redundant region bounds
check in vm_userspace_mem_region_add. Region overlap checking is already
performed by the call to userspace_mem_region_find.
Tested: Compiled tools/testing/selftests/kvm with -static
Ran all resulting test binaries on an Intel Haswell test machine
All tests passed
Signed-off-by: Ben Gardon <[email protected]>
Reviewed-by: Jim Mattson <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
tools/testing/selftests/kvm/lib/kvm_util.c | 9 ++-------
1 file changed, 2 insertions(+), 7 deletions(-)
diff --git a/tools/testing/selftests/kvm/lib/kvm_util.c b/tools/testing/selftests/kvm/lib/kvm_util.c
index 1b41e71283d5..6ee49133ad22 100644
--- a/tools/testing/selftests/kvm/lib/kvm_util.c
+++ b/tools/testing/selftests/kvm/lib/kvm_util.c
@@ -532,7 +532,7 @@ void vm_userspace_mem_region_add(struct kvm_vm *vm,
* already exist.
*/
region = (struct userspace_mem_region *) userspace_mem_region_find(
- vm, guest_paddr, guest_paddr + npages * vm->page_size);
+ vm, guest_paddr, (guest_paddr + npages * vm->page_size) - 1);
if (region != NULL)
TEST_ASSERT(false, "overlapping userspace_mem_region already "
"exists\n"
@@ -548,15 +548,10 @@ void vm_userspace_mem_region_add(struct kvm_vm *vm,
region = region->next) {
if (region->region.slot == slot)
break;
- if ((guest_paddr <= (region->region.guest_phys_addr
- + region->region.memory_size))
- && ((guest_paddr + npages * vm->page_size)
- >= region->region.guest_phys_addr))
- break;
}
if (region != NULL)
TEST_ASSERT(false, "A mem region with the requested slot "
- "or overlapping physical memory range already exists.\n"
+ "already exists.\n"
" requested slot: %u paddr: 0x%lx npages: 0x%lx\n"
" existing slot: %u paddr: 0x%lx size: 0x%lx",
slot, guest_paddr, npages,
--
2.19.1
From: Shuming Fan <[email protected]>
[ Upstream commit 22c7d5e7bad1fb2d8b9c611acb55a389f5d848d8 ]
The ADC mixer setting needs to restore to default value
after calibration.
Signed-off-by: Shuming Fan <[email protected]>
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/soc/codecs/rt5682.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/sound/soc/codecs/rt5682.c b/sound/soc/codecs/rt5682.c
index 34cfaf8f6f34..89c43b26c379 100644
--- a/sound/soc/codecs/rt5682.c
+++ b/sound/soc/codecs/rt5682.c
@@ -2512,6 +2512,7 @@ static void rt5682_calibrate(struct rt5682_priv *rt5682)
regmap_write(rt5682->regmap, RT5682_PWR_DIG_1, 0x0000);
regmap_write(rt5682->regmap, RT5682_CHOP_DAC, 0x2000);
regmap_write(rt5682->regmap, RT5682_CALIB_ADC_CTRL, 0x2005);
+ regmap_write(rt5682->regmap, RT5682_STO1_ADC_MIXER, 0xc0c4);
mutex_unlock(&rt5682->calibrate_mutex);
--
2.19.1
From: Dan Carpenter <[email protected]>
[ Upstream commit df28169e1538e4a8bcd8b779b043e5aa6524545c ]
The source_sink_alloc_func() function is supposed to return error
pointers on error. The function is called from usb_get_function() which
doesn't check for NULL returns so it would result in an Oops.
Of course, in the current kernel, small allocations always succeed so
this doesn't affect runtime.
Signed-off-by: Dan Carpenter <[email protected]>
Signed-off-by: Felipe Balbi <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/usb/gadget/function/f_sourcesink.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/usb/gadget/function/f_sourcesink.c b/drivers/usb/gadget/function/f_sourcesink.c
index 9cdef108fb1b..ed68a4860b7d 100644
--- a/drivers/usb/gadget/function/f_sourcesink.c
+++ b/drivers/usb/gadget/function/f_sourcesink.c
@@ -838,7 +838,7 @@ static struct usb_function *source_sink_alloc_func(
ss = kzalloc(sizeof(*ss), GFP_KERNEL);
if (!ss)
- return NULL;
+ return ERR_PTR(-ENOMEM);
ss_opts = container_of(fi, struct f_ss_opts, func_inst);
--
2.19.1
From: Silvio Cesare <[email protected]>
[ Upstream commit c407cd008fd039320d147088b52d0fa34ed3ddcb ]
Change snprintf to scnprintf. There are generally two cases where using
snprintf causes problems.
1) Uses of size += snprintf(buf, SIZE - size, fmt, ...)
In this case, if snprintf would have written more characters than what the
buffer size (SIZE) is, then size will end up larger than SIZE. In later
uses of snprintf, SIZE - size will result in a negative number, leading
to problems. Note that size might already be too large by using
size = snprintf before the code reaches a case of size += snprintf.
2) If size is ultimately used as a length parameter for a copy back to user
space, then it will potentially allow for a buffer overflow and information
disclosure when size is greater than SIZE. When the size is used to index
the buffer directly, we can have memory corruption. This also means when
size = snprintf... is used, it may also cause problems since size may become
large. Copying to userspace is mitigated by the HARDENED_USERCOPY kernel
configuration.
The solution to these issues is to use scnprintf which returns the number of
characters actually written to the buffer, so the size variable will never
exceed SIZE.
Signed-off-by: Silvio Cesare <[email protected]>
Cc: Timur Tabi <[email protected]>
Cc: Nicolin Chen <[email protected]>
Cc: Mark Brown <[email protected]>
Cc: Xiubo Li <[email protected]>
Cc: Fabio Estevam <[email protected]>
Cc: Dan Carpenter <[email protected]>
Cc: Kees Cook <[email protected]>
Cc: Will Deacon <[email protected]>
Cc: Greg KH <[email protected]>
Signed-off-by: Willy Tarreau <[email protected]>
Acked-by: Nicolin Chen <[email protected]>
Reviewed-by: Kees Cook <[email protected]>
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/soc/fsl/imx-audmux.c | 24 ++++++++++++------------
1 file changed, 12 insertions(+), 12 deletions(-)
diff --git a/sound/soc/fsl/imx-audmux.c b/sound/soc/fsl/imx-audmux.c
index 392d5eef356d..99e07b01a2ce 100644
--- a/sound/soc/fsl/imx-audmux.c
+++ b/sound/soc/fsl/imx-audmux.c
@@ -86,49 +86,49 @@ static ssize_t audmux_read_file(struct file *file, char __user *user_buf,
if (!buf)
return -ENOMEM;
- ret = snprintf(buf, PAGE_SIZE, "PDCR: %08x\nPTCR: %08x\n",
+ ret = scnprintf(buf, PAGE_SIZE, "PDCR: %08x\nPTCR: %08x\n",
pdcr, ptcr);
if (ptcr & IMX_AUDMUX_V2_PTCR_TFSDIR)
- ret += snprintf(buf + ret, PAGE_SIZE - ret,
+ ret += scnprintf(buf + ret, PAGE_SIZE - ret,
"TxFS output from %s, ",
audmux_port_string((ptcr >> 27) & 0x7));
else
- ret += snprintf(buf + ret, PAGE_SIZE - ret,
+ ret += scnprintf(buf + ret, PAGE_SIZE - ret,
"TxFS input, ");
if (ptcr & IMX_AUDMUX_V2_PTCR_TCLKDIR)
- ret += snprintf(buf + ret, PAGE_SIZE - ret,
+ ret += scnprintf(buf + ret, PAGE_SIZE - ret,
"TxClk output from %s",
audmux_port_string((ptcr >> 22) & 0x7));
else
- ret += snprintf(buf + ret, PAGE_SIZE - ret,
+ ret += scnprintf(buf + ret, PAGE_SIZE - ret,
"TxClk input");
- ret += snprintf(buf + ret, PAGE_SIZE - ret, "\n");
+ ret += scnprintf(buf + ret, PAGE_SIZE - ret, "\n");
if (ptcr & IMX_AUDMUX_V2_PTCR_SYN) {
- ret += snprintf(buf + ret, PAGE_SIZE - ret,
+ ret += scnprintf(buf + ret, PAGE_SIZE - ret,
"Port is symmetric");
} else {
if (ptcr & IMX_AUDMUX_V2_PTCR_RFSDIR)
- ret += snprintf(buf + ret, PAGE_SIZE - ret,
+ ret += scnprintf(buf + ret, PAGE_SIZE - ret,
"RxFS output from %s, ",
audmux_port_string((ptcr >> 17) & 0x7));
else
- ret += snprintf(buf + ret, PAGE_SIZE - ret,
+ ret += scnprintf(buf + ret, PAGE_SIZE - ret,
"RxFS input, ");
if (ptcr & IMX_AUDMUX_V2_PTCR_RCLKDIR)
- ret += snprintf(buf + ret, PAGE_SIZE - ret,
+ ret += scnprintf(buf + ret, PAGE_SIZE - ret,
"RxClk output from %s",
audmux_port_string((ptcr >> 12) & 0x7));
else
- ret += snprintf(buf + ret, PAGE_SIZE - ret,
+ ret += scnprintf(buf + ret, PAGE_SIZE - ret,
"RxClk input");
}
- ret += snprintf(buf + ret, PAGE_SIZE - ret,
+ ret += scnprintf(buf + ret, PAGE_SIZE - ret,
"\nData received from %s\n",
audmux_port_string((pdcr >> 13) & 0x7));
--
2.19.1
From: "Ewan D. Milne" <[email protected]>
[ Upstream commit 7961cba6f7d8215fa632df3d220e5154bb825249 ]
We cannot wait on a completion object in the lpfc_nvme_lport structure in
the _destroy_localport() code path because the NVMe/fc transport will free
that structure immediately after the .localport_delete() callback. This
results in a use-after-free, and a hang if slub_debug=FZPU is enabled.
Fix this by putting the completion on the stack.
Signed-off-by: Ewan D. Milne <[email protected]>
Acked-by: James Smart <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/scsi/lpfc/lpfc_nvme.c | 16 +++++++++-------
drivers/scsi/lpfc/lpfc_nvme.h | 2 +-
2 files changed, 10 insertions(+), 8 deletions(-)
diff --git a/drivers/scsi/lpfc/lpfc_nvme.c b/drivers/scsi/lpfc/lpfc_nvme.c
index ba831def9301..b6fe88de372a 100644
--- a/drivers/scsi/lpfc/lpfc_nvme.c
+++ b/drivers/scsi/lpfc/lpfc_nvme.c
@@ -297,7 +297,8 @@ lpfc_nvme_localport_delete(struct nvme_fc_local_port *localport)
lport);
/* release any threads waiting for the unreg to complete */
- complete(&lport->lport_unreg_done);
+ if (lport->vport->localport)
+ complete(lport->lport_unreg_cmp);
}
/* lpfc_nvme_remoteport_delete
@@ -2547,7 +2548,8 @@ lpfc_nvme_create_localport(struct lpfc_vport *vport)
*/
void
lpfc_nvme_lport_unreg_wait(struct lpfc_vport *vport,
- struct lpfc_nvme_lport *lport)
+ struct lpfc_nvme_lport *lport,
+ struct completion *lport_unreg_cmp)
{
#if (IS_ENABLED(CONFIG_NVME_FC))
u32 wait_tmo;
@@ -2559,8 +2561,7 @@ lpfc_nvme_lport_unreg_wait(struct lpfc_vport *vport,
*/
wait_tmo = msecs_to_jiffies(LPFC_NVME_WAIT_TMO * 1000);
while (true) {
- ret = wait_for_completion_timeout(&lport->lport_unreg_done,
- wait_tmo);
+ ret = wait_for_completion_timeout(lport_unreg_cmp, wait_tmo);
if (unlikely(!ret)) {
lpfc_printf_vlog(vport, KERN_ERR, LOG_NVME_IOERR,
"6176 Lport %p Localport %p wait "
@@ -2594,12 +2595,12 @@ lpfc_nvme_destroy_localport(struct lpfc_vport *vport)
struct lpfc_nvme_lport *lport;
struct lpfc_nvme_ctrl_stat *cstat;
int ret;
+ DECLARE_COMPLETION_ONSTACK(lport_unreg_cmp);
if (vport->nvmei_support == 0)
return;
localport = vport->localport;
- vport->localport = NULL;
lport = (struct lpfc_nvme_lport *)localport->private;
cstat = lport->cstat;
@@ -2610,13 +2611,14 @@ lpfc_nvme_destroy_localport(struct lpfc_vport *vport)
/* lport's rport list is clear. Unregister
* lport and release resources.
*/
- init_completion(&lport->lport_unreg_done);
+ lport->lport_unreg_cmp = &lport_unreg_cmp;
ret = nvme_fc_unregister_localport(localport);
/* Wait for completion. This either blocks
* indefinitely or succeeds
*/
- lpfc_nvme_lport_unreg_wait(vport, lport);
+ lpfc_nvme_lport_unreg_wait(vport, lport, &lport_unreg_cmp);
+ vport->localport = NULL;
kfree(cstat);
/* Regardless of the unregister upcall response, clear
diff --git a/drivers/scsi/lpfc/lpfc_nvme.h b/drivers/scsi/lpfc/lpfc_nvme.h
index cfd4719be25c..b234d0298994 100644
--- a/drivers/scsi/lpfc/lpfc_nvme.h
+++ b/drivers/scsi/lpfc/lpfc_nvme.h
@@ -50,7 +50,7 @@ struct lpfc_nvme_ctrl_stat {
/* Declare nvme-based local and remote port definitions. */
struct lpfc_nvme_lport {
struct lpfc_vport *vport;
- struct completion lport_unreg_done;
+ struct completion *lport_unreg_cmp;
/* Add stats counters here */
struct lpfc_nvme_ctrl_stat *cstat;
atomic_t fc4NvmeLsRequests;
--
2.19.1
From: Douglas Anderson <[email protected]>
[ Upstream commit a3c5e2cd79753121f49a8662c1e0a60ddb5486ca ]
The bindings for Qualcomm opp levels changed after being Acked but
before landing. Thus the code in the GPU driver that was relying on
the old bindings is now broken.
Let's change the code to match the new bindings by adjusting the old
string 'qcom,level' to the new string 'opp-level'. See the patch
("dt-bindings: opp: Introduce opp-level bindings").
NOTE: we will do additional cleanup to totally remove the string from
the code and use the new dev_pm_opp_get_level() but we'll do it in a
future patch. This will facilitate getting the important code fix in
sooner without having to deal with cross-maintainer dependencies.
This patch needs to land before the patch ("arm64: dts: sdm845: Add
gpu and gmu device nodes") since if a tree contains the device tree
patch but not this one you'll get a crash at bootup.
Fixes: 4b565ca5a2cb ("drm/msm: Add A6XX device support")
Signed-off-by: Douglas Anderson <[email protected]>
Reviewed-by: Jordan Crouse <[email protected]>
Signed-off-by: Rob Clark <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/msm/adreno/a6xx_gmu.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/msm/adreno/a6xx_gmu.c b/drivers/gpu/drm/msm/adreno/a6xx_gmu.c
index d4e98e5876bc..00b2e6e94689 100644
--- a/drivers/gpu/drm/msm/adreno/a6xx_gmu.c
+++ b/drivers/gpu/drm/msm/adreno/a6xx_gmu.c
@@ -939,7 +939,7 @@ static u32 a6xx_gmu_get_arc_level(struct device *dev, unsigned long freq)
np = dev_pm_opp_get_of_node(opp);
if (np) {
- of_property_read_u32(np, "qcom,level", &val);
+ of_property_read_u32(np, "opp-level", &val);
of_node_put(np);
}
--
2.19.1
This patch turned out to be wrong and was reverted. Please drop this patch.
commit 947b7ac135b16aa60f9141ff72bd494eda0edb5e
Author: Jens Axboe <[email protected]>
Date: Sun Jan 27 06:35:28 2019 -0700
Revert "block: cover another queue enter recursion via BIO_QUEUE_ENTERED"
We can't touch a bio after ->make_request_fn(), for all we know it could
already have been completed by the time this function returns.
This reverts commit 698cef173983b086977e633e46476e0f925ca01e.
Reported-by: [email protected]
Signed-off-by: Jens Axboe <[email protected]>
> From: Ming Lei <[email protected]>
>
> [ Upstream commit 698cef173983b086977e633e46476e0f925ca01e ]
>
> Except for blk_queue_split(), bio_split() is used for splitting bio too,
> then the remained bio is often resubmit to queue via generic_make_request().
> So the same queue enter recursion exits in this case too. Unfortunatley
> commit cd4a4ae4683dc2 doesn't help this case.
>
> This patch covers the above case by setting BIO_QUEUE_ENTERED before calling
> q->make_request_fn.
>
> In theory the per-bio flag is used to simulate one stack variable, it is
> just fine to clear it after q->make_request_fn is returned. Especially
> the same bio can't be submitted from another context.
>
> Fixes: cd4a4ae4683dc2 ("block: don't use blocking queue entered for recursive bio submits")
> Cc: Tetsuo Handa <[email protected]>
> Cc: NeilBrown <[email protected]>
> Reviewed-by: Mike Snitzer <[email protected]>
> Signed-off-by: Ming Lei <[email protected]>
> Signed-off-by: Jens Axboe <[email protected]>
> Signed-off-by: Sasha Levin <[email protected]>
> ---
> block/blk-core.c | 11 +++++++++++
> block/blk-merge.c | 10 ----------
> 2 files changed, 11 insertions(+), 10 deletions(-)
On Thu, Feb 14, 2019 at 09:08:27PM -0500, Sasha Levin wrote:
> From: Ming Lei <[email protected]>
>
> [ Upstream commit 698cef173983b086977e633e46476e0f925ca01e ]
>
> Except for blk_queue_split(), bio_split() is used for splitting bio too,
> then the remained bio is often resubmit to queue via generic_make_request().
> So the same queue enter recursion exits in this case too. Unfortunatley
> commit cd4a4ae4683dc2 doesn't help this case.
>
> This patch covers the above case by setting BIO_QUEUE_ENTERED before calling
> q->make_request_fn.
>
> In theory the per-bio flag is used to simulate one stack variable, it is
> just fine to clear it after q->make_request_fn is returned. Especially
> the same bio can't be submitted from another context.
>
> Fixes: cd4a4ae4683dc2 ("block: don't use blocking queue entered for recursive bio submits")
> Cc: Tetsuo Handa <[email protected]>
> Cc: NeilBrown <[email protected]>
> Reviewed-by: Mike Snitzer <[email protected]>
> Signed-off-by: Ming Lei <[email protected]>
> Signed-off-by: Jens Axboe <[email protected]>
> Signed-off-by: Sasha Levin <[email protected]>
> ---
> block/blk-core.c | 11 +++++++++++
> block/blk-merge.c | 10 ----------
> 2 files changed, 11 insertions(+), 10 deletions(-)
>
> diff --git a/block/blk-core.c b/block/blk-core.c
> index deb56932f8c4..22260339f66f 100644
> --- a/block/blk-core.c
> +++ b/block/blk-core.c
> @@ -2449,7 +2449,18 @@ blk_qc_t generic_make_request(struct bio *bio)
> /* Create a fresh bio_list for all subordinate requests */
> bio_list_on_stack[1] = bio_list_on_stack[0];
> bio_list_init(&bio_list_on_stack[0]);
> +
> + /*
> + * Since we're recursing into make_request here, ensure
> + * that we mark this bio as already having entered the queue.
> + * If not, and the queue is going away, we can get stuck
> + * forever on waiting for the queue reference to drop. But
> + * that will never happen, as we're already holding a
> + * reference to it.
> + */
> + bio_set_flag(bio, BIO_QUEUE_ENTERED);
> ret = q->make_request_fn(q, bio);
> + bio_clear_flag(bio, BIO_QUEUE_ENTERED);
>
> /* sort new bios into those for a lower level
> * and those for the same level
> diff --git a/block/blk-merge.c b/block/blk-merge.c
> index 7695034f4b87..adfe835ab258 100644
> --- a/block/blk-merge.c
> +++ b/block/blk-merge.c
> @@ -272,16 +272,6 @@ void blk_queue_split(struct request_queue *q, struct bio **bio)
> /* there isn't chance to merge the splitted bio */
> split->bi_opf |= REQ_NOMERGE;
>
> - /*
> - * Since we're recursing into make_request here, ensure
> - * that we mark this bio as already having entered the queue.
> - * If not, and the queue is going away, we can get stuck
> - * forever on waiting for the queue reference to drop. But
> - * that will never happen, as we're already holding a
> - * reference to it.
> - */
> - bio_set_flag(*bio, BIO_QUEUE_ENTERED);
> -
> bio_chain(split, *bio);
> trace_block_split(q, split, (*bio)->bi_iter.bi_sector);
> generic_make_request(*bio);
> --
> 2.19.1
>
This one should be dropped, given it has been reverted.
--
Ming
From: Jens Axboe <[email protected]>
[ Upstream commit 947b7ac135b16aa60f9141ff72bd494eda0edb5e ]
We can't touch a bio after ->make_request_fn(), for all we know it could
already have been completed by the time this function returns.
This reverts commit 698cef173983b086977e633e46476e0f925ca01e.
Reported-by: [email protected]
Signed-off-by: Jens Axboe <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
block/blk-core.c | 11 -----------
block/blk-merge.c | 10 ++++++++++
2 files changed, 10 insertions(+), 11 deletions(-)
diff --git a/block/blk-core.c b/block/blk-core.c
index 22260339f66f..deb56932f8c4 100644
--- a/block/blk-core.c
+++ b/block/blk-core.c
@@ -2449,18 +2449,7 @@ blk_qc_t generic_make_request(struct bio *bio)
/* Create a fresh bio_list for all subordinate requests */
bio_list_on_stack[1] = bio_list_on_stack[0];
bio_list_init(&bio_list_on_stack[0]);
-
- /*
- * Since we're recursing into make_request here, ensure
- * that we mark this bio as already having entered the queue.
- * If not, and the queue is going away, we can get stuck
- * forever on waiting for the queue reference to drop. But
- * that will never happen, as we're already holding a
- * reference to it.
- */
- bio_set_flag(bio, BIO_QUEUE_ENTERED);
ret = q->make_request_fn(q, bio);
- bio_clear_flag(bio, BIO_QUEUE_ENTERED);
/* sort new bios into those for a lower level
* and those for the same level
diff --git a/block/blk-merge.c b/block/blk-merge.c
index adfe835ab258..7695034f4b87 100644
--- a/block/blk-merge.c
+++ b/block/blk-merge.c
@@ -272,6 +272,16 @@ void blk_queue_split(struct request_queue *q, struct bio **bio)
/* there isn't chance to merge the splitted bio */
split->bi_opf |= REQ_NOMERGE;
+ /*
+ * Since we're recursing into make_request here, ensure
+ * that we mark this bio as already having entered the queue.
+ * If not, and the queue is going away, we can get stuck
+ * forever on waiting for the queue reference to drop. But
+ * that will never happen, as we're already holding a
+ * reference to it.
+ */
+ bio_set_flag(*bio, BIO_QUEUE_ENTERED);
+
bio_chain(split, *bio);
trace_block_split(q, split, (*bio)->bi_iter.bi_sector);
generic_make_request(*bio);
--
2.19.1
From: Balaji Pothunoori <[email protected]>
[ Upstream commit 7ed5285396c257fd4070b1e29e7b2341aae2a1ce ]
Following call trace is observed while adding TDLS peer entry in driver
during TDLS setup.
Call Trace:
[<c1301476>] dump_stack+0x47/0x61
[<c10537d2>] __warn+0xe2/0x100
[<fa22415f>] ? sta_apply_parameters+0x49f/0x550 [mac80211]
[<c1053895>] warn_slowpath_null+0x25/0x30
[<fa22415f>] sta_apply_parameters+0x49f/0x550 [mac80211]
[<fa20ad42>] ? sta_info_alloc+0x1c2/0x450 [mac80211]
[<fa224623>] ieee80211_add_station+0xe3/0x160 [mac80211]
[<c1876fe3>] nl80211_new_station+0x273/0x420
[<c170f6d9>] genl_rcv_msg+0x219/0x3c0
[<c170f4c0>] ? genl_rcv+0x30/0x30
[<c170ee7e>] netlink_rcv_skb+0x8e/0xb0
[<c170f4ac>] genl_rcv+0x1c/0x30
[<c170e8aa>] netlink_unicast+0x13a/0x1d0
[<c170ec18>] netlink_sendmsg+0x2d8/0x390
[<c16c5acd>] sock_sendmsg+0x2d/0x40
[<c16c6369>] ___sys_sendmsg+0x1d9/0x1e0
Fixing this by allowing TDLS setup request only when we have completed
association.
Signed-off-by: Balaji Pothunoori <[email protected]>
Signed-off-by: Johannes Berg <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/mac80211/cfg.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c
index 818aa0060349..04337e6be7f0 100644
--- a/net/mac80211/cfg.c
+++ b/net/mac80211/cfg.c
@@ -1490,6 +1490,10 @@ static int ieee80211_add_station(struct wiphy *wiphy, struct net_device *dev,
if (params->sta_flags_set & BIT(NL80211_STA_FLAG_TDLS_PEER))
sta->sta.tdls = true;
+ if (sta->sta.tdls && sdata->vif.type == NL80211_IFTYPE_STATION &&
+ !sdata->u.mgd.associated)
+ return -EINVAL;
+
err = sta_apply_parameters(local, sta, params);
if (err) {
sta_info_free(local, sta);
--
2.19.1
From: Maciej Żenczykowski <[email protected]>
[ Upstream commit 3b707c3008cad04604c1f50e39f456621821c414 ]
__bpf_redirect() and act_mirred checks this boolean
to determine whether to prefix an ethernet header.
Signed-off-by: Maciej Żenczykowski <[email protected]>
Acked-by: Daniel Borkmann <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
include/linux/if_arp.h | 1 +
1 file changed, 1 insertion(+)
diff --git a/include/linux/if_arp.h b/include/linux/if_arp.h
index 6756fea18b69..e44746de95cd 100644
--- a/include/linux/if_arp.h
+++ b/include/linux/if_arp.h
@@ -54,6 +54,7 @@ static inline bool dev_is_mac_header_xmit(const struct net_device *dev)
case ARPHRD_IPGRE:
case ARPHRD_VOID:
case ARPHRD_NONE:
+ case ARPHRD_RAWIP:
return false;
default:
return true;
--
2.19.1
From: Vitaly Kuznetsov <[email protected]>
[ Upstream commit 35b531a1e7fc30ac8c62e5ac1794eb1460da614e ]
Check that KVM_CAP_HYPERV_ENLIGHTENED_VMCS returns correct version range.
Signed-off-by: Vitaly Kuznetsov <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
tools/testing/selftests/kvm/x86_64/evmcs_test.c | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/tools/testing/selftests/kvm/x86_64/evmcs_test.c b/tools/testing/selftests/kvm/x86_64/evmcs_test.c
index 92c2cfd1b182..5d89b30ddde2 100644
--- a/tools/testing/selftests/kvm/x86_64/evmcs_test.c
+++ b/tools/testing/selftests/kvm/x86_64/evmcs_test.c
@@ -103,6 +103,12 @@ int main(int argc, char *argv[])
vcpu_ioctl(vm, VCPU_ID, KVM_ENABLE_CAP, &enable_evmcs_cap);
+ /* KVM should return supported EVMCS version range */
+ TEST_ASSERT(((evmcs_ver >> 8) >= (evmcs_ver & 0xff)) &&
+ (evmcs_ver & 0xff) > 0,
+ "Incorrect EVMCS version range: %x:%x\n",
+ evmcs_ver & 0xff, evmcs_ver >> 8);
+
run = vcpu_state(vm, VCPU_ID);
vcpu_regs_get(vm, VCPU_ID, ®s1);
--
2.19.1
From: Suravee Suthikulpanit <[email protected]>
[ Upstream commit bb218fbcfaaa3b115d4cd7a43c0ca164f3a96e57 ]
In case of incomplete IPI with invalid interrupt type, the current
SVM driver does not properly emulate the IPI, and fails to boot
FreeBSD guests with multiple vcpus when enabling AVIC.
Fix this by update APIC ICR high/low registers, which also
emulate sending the IPI.
Signed-off-by: Suravee Suthikulpanit <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/x86/kvm/svm.c | 19 ++++---------------
1 file changed, 4 insertions(+), 15 deletions(-)
diff --git a/arch/x86/kvm/svm.c b/arch/x86/kvm/svm.c
index 101f53ccf571..cea8f8c03e8c 100644
--- a/arch/x86/kvm/svm.c
+++ b/arch/x86/kvm/svm.c
@@ -4486,25 +4486,14 @@ static int avic_incomplete_ipi_interception(struct vcpu_svm *svm)
kvm_lapic_reg_write(apic, APIC_ICR, icrl);
break;
case AVIC_IPI_FAILURE_TARGET_NOT_RUNNING: {
- int i;
- struct kvm_vcpu *vcpu;
- struct kvm *kvm = svm->vcpu.kvm;
struct kvm_lapic *apic = svm->vcpu.arch.apic;
/*
- * At this point, we expect that the AVIC HW has already
- * set the appropriate IRR bits on the valid target
- * vcpus. So, we just need to kick the appropriate vcpu.
+ * Update ICR high and low, then emulate sending IPI,
+ * which is handled when writing APIC_ICR.
*/
- kvm_for_each_vcpu(i, vcpu, kvm) {
- bool m = kvm_apic_match_dest(vcpu, apic,
- icrl & KVM_APIC_SHORT_MASK,
- GET_APIC_DEST_FIELD(icrh),
- icrl & KVM_APIC_DEST_MASK);
-
- if (m && !avic_vcpu_is_running(vcpu))
- kvm_vcpu_wake_up(vcpu);
- }
+ kvm_lapic_reg_write(apic, APIC_ICR2, icrh);
+ kvm_lapic_reg_write(apic, APIC_ICR, icrl);
break;
}
case AVIC_IPI_FAILURE_INVALID_TARGET:
--
2.19.1
From: Pavel Shilovsky <[email protected]>
[ Upstream commit 6a9cbdd1ceca1dc2359ddf082efe61b97c3e752b ]
If the server doesn't grant us at least 3 credits during the mount
we won't be able to complete it because query path info operation
requires 3 credits. Use the cached file handle if possible to allow
the mount to succeed.
Signed-off-by: Pavel Shilovsky <[email protected]>
Reviewed-by: Ronnie Sahlberg <[email protected]>
Signed-off-by: Steve French <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/cifs/smb2inode.c | 17 +++++++++++++++++
1 file changed, 17 insertions(+)
diff --git a/fs/cifs/smb2inode.c b/fs/cifs/smb2inode.c
index a8999f930b22..057d2034209f 100644
--- a/fs/cifs/smb2inode.c
+++ b/fs/cifs/smb2inode.c
@@ -294,6 +294,8 @@ smb2_query_path_info(const unsigned int xid, struct cifs_tcon *tcon,
int rc;
struct smb2_file_all_info *smb2_data;
__u32 create_options = 0;
+ struct cifs_fid fid;
+ bool no_cached_open = tcon->nohandlecache;
*adjust_tz = false;
*symlink = false;
@@ -302,6 +304,21 @@ smb2_query_path_info(const unsigned int xid, struct cifs_tcon *tcon,
GFP_KERNEL);
if (smb2_data == NULL)
return -ENOMEM;
+
+ /* If it is a root and its handle is cached then use it */
+ if (!strlen(full_path) && !no_cached_open) {
+ rc = open_shroot(xid, tcon, &fid);
+ if (rc)
+ goto out;
+ rc = SMB2_query_info(xid, tcon, fid.persistent_fid,
+ fid.volatile_fid, smb2_data);
+ close_shroot(&tcon->crfid);
+ if (rc)
+ goto out;
+ move_smb2_info_to_cifs(data, smb2_data);
+ goto out;
+ }
+
if (backup_cred(cifs_sb))
create_options |= CREATE_OPEN_BACKUP_INTENT;
--
2.19.1
From: Mathieu Malaterre <[email protected]>
[ Upstream commit 7c53eb5d87bc21464da4268c3c0c47457b6d9c9b ]
During refactor in commit 9e478066eae4 ("mac80211: fix MU-MIMO
follow-MAC mode") a new struct 'action' was declared with packed
attribute as:
struct {
struct ieee80211_hdr_3addr hdr;
u8 category;
u8 action_code;
} __packed action;
But since struct 'ieee80211_hdr_3addr' is declared with an aligned
keyword as:
struct ieee80211_hdr {
__le16 frame_control;
__le16 duration_id;
u8 addr1[ETH_ALEN];
u8 addr2[ETH_ALEN];
u8 addr3[ETH_ALEN];
__le16 seq_ctrl;
u8 addr4[ETH_ALEN];
} __packed __aligned(2);
Solve the ambiguity of placing aligned structure in a packed one by
adding the aligned(2) attribute to struct 'action'.
This removes the following warning (W=1):
net/mac80211/rx.c:234:2: warning: alignment 1 of 'struct <anonymous>' is less than 2 [-Wpacked-not-aligned]
Cc: Johannes Berg <[email protected]>
Suggested-by: Johannes Berg <[email protected]>
Signed-off-by: Mathieu Malaterre <[email protected]>
Signed-off-by: Johannes Berg <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/mac80211/rx.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/net/mac80211/rx.c b/net/mac80211/rx.c
index ef215d0e99b0..40f1a2986048 100644
--- a/net/mac80211/rx.c
+++ b/net/mac80211/rx.c
@@ -230,7 +230,7 @@ static void ieee80211_handle_mu_mimo_mon(struct ieee80211_sub_if_data *sdata,
struct ieee80211_hdr_3addr hdr;
u8 category;
u8 action_code;
- } __packed action;
+ } __packed __aligned(2) action;
if (!sdata)
return;
--
2.19.1
From: Zhang Run <[email protected]>
[ Upstream commit 6eea3527e68acc22483f4763c8682f223eb90029 ]
The ax88772_bind() should return error code immediately when the PHY
was not reset properly through ax88772a_hw_reset().
Otherwise, The asix_get_phyid() will block when get the PHY
Identifier from the PHYSID1 MII registers through asix_mdio_read()
due to the PHY isn't ready. Furthermore, it will produce a lot of
error message cause system crash.As follows:
asix 1-1:1.0 (unnamed net_device) (uninitialized): Failed to write
reg index 0x0000: -71
asix 1-1:1.0 (unnamed net_device) (uninitialized): Failed to send
software reset: ffffffb9
asix 1-1:1.0 (unnamed net_device) (uninitialized): Failed to write
reg index 0x0000: -71
asix 1-1:1.0 (unnamed net_device) (uninitialized): Failed to enable
software MII access
asix 1-1:1.0 (unnamed net_device) (uninitialized): Failed to read
reg index 0x0000: -71
asix 1-1:1.0 (unnamed net_device) (uninitialized): Failed to write
reg index 0x0000: -71
asix 1-1:1.0 (unnamed net_device) (uninitialized): Failed to enable
software MII access
asix 1-1:1.0 (unnamed net_device) (uninitialized): Failed to read
reg index 0x0000: -71
...
Signed-off-by: Zhang Run <[email protected]>
Reviewed-by: Yang Wei <[email protected]>
Tested-by: Marcel Ziswiler <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/usb/asix_devices.c | 9 +++++++--
1 file changed, 7 insertions(+), 2 deletions(-)
diff --git a/drivers/net/usb/asix_devices.c b/drivers/net/usb/asix_devices.c
index b654f05b2ccd..3d93993e74da 100644
--- a/drivers/net/usb/asix_devices.c
+++ b/drivers/net/usb/asix_devices.c
@@ -739,8 +739,13 @@ static int ax88772_bind(struct usbnet *dev, struct usb_interface *intf)
asix_read_cmd(dev, AX_CMD_STATMNGSTS_REG, 0, 0, 1, &chipcode, 0);
chipcode &= AX_CHIPCODE_MASK;
- (chipcode == AX_AX88772_CHIPCODE) ? ax88772_hw_reset(dev, 0) :
- ax88772a_hw_reset(dev, 0);
+ ret = (chipcode == AX_AX88772_CHIPCODE) ? ax88772_hw_reset(dev, 0) :
+ ax88772a_hw_reset(dev, 0);
+
+ if (ret < 0) {
+ netdev_dbg(dev->net, "Failed to reset AX88772: %d\n", ret);
+ return ret;
+ }
/* Read PHYID register *AFTER* the PHY was reset properly */
phyid = asix_get_phyid(dev);
--
2.19.1
From: Hannes Reinecke <[email protected]>
[ Upstream commit 78a61cd42a64f3587862b372a79e1d6aaf131fd7 ]
Bit 6 in the ANACAP field is used to indicate that the ANA group ID
doesn't change while the namespace is attached to the controller.
There is an optimisation in the code to only allocate space
for the ANA group header, as the namespace list won't change and
hence would not need to be refreshed.
However, this optimisation was never carried over to the actual
workflow, which always assumes that the buffer is large enough
to hold the ANA header _and_ the namespace list.
So drop this optimisation and always allocate enough space.
Reviewed-by: Christoph Hellwig <[email protected]>
Signed-off-by: Hannes Reinecke <[email protected]>
Signed-off-by: Sagi Grimberg <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/nvme/host/multipath.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/drivers/nvme/host/multipath.c b/drivers/nvme/host/multipath.c
index 9901afd804ce..266bac07ed11 100644
--- a/drivers/nvme/host/multipath.c
+++ b/drivers/nvme/host/multipath.c
@@ -561,8 +561,7 @@ int nvme_mpath_init(struct nvme_ctrl *ctrl, struct nvme_id_ctrl *id)
timer_setup(&ctrl->anatt_timer, nvme_anatt_timeout, 0);
ctrl->ana_log_size = sizeof(struct nvme_ana_rsp_hdr) +
ctrl->nanagrpid * sizeof(struct nvme_ana_group_desc);
- if (!(ctrl->anacap & (1 << 6)))
- ctrl->ana_log_size += ctrl->max_namespaces * sizeof(__le32);
+ ctrl->ana_log_size += ctrl->max_namespaces * sizeof(__le32);
if (ctrl->ana_log_size > ctrl->max_hw_sectors << SECTOR_SHIFT) {
dev_err(ctrl->device,
--
2.19.1
From: Sagi Grimberg <[email protected]>
[ Upstream commit 4c174e6366746ae8d49f9cc409f728eebb7a9ac9 ]
Currently, we have several problems with the timeout
handler:
1. If we timeout on the controller establishment flow, we will hang
because we don't execute the error recovery (and we shouldn't because
the create_ctrl flow needs to fail and cleanup on its own)
2. We might also hang if we get a disconnet on a queue while the
controller is already deleting. This racy flow can cause the controller
disable/shutdown admin command to hang.
We cannot complete a timed out request from the timeout handler without
mutual exclusion from the teardown flow (e.g. nvme_rdma_error_recovery_work).
So we serialize it in the timeout handler and teardown io and admin
queues to guarantee that no one races with us from completing the
request.
Reported-by: Jaesoo Lee <[email protected]>
Reviewed-by: Christoph Hellwig <[email protected]>
Signed-off-by: Sagi Grimberg <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/nvme/host/rdma.c | 26 ++++++++++++++++++--------
1 file changed, 18 insertions(+), 8 deletions(-)
diff --git a/drivers/nvme/host/rdma.c b/drivers/nvme/host/rdma.c
index ab6ec7295bf9..6e24b20304b5 100644
--- a/drivers/nvme/host/rdma.c
+++ b/drivers/nvme/host/rdma.c
@@ -1679,18 +1679,28 @@ static enum blk_eh_timer_return
nvme_rdma_timeout(struct request *rq, bool reserved)
{
struct nvme_rdma_request *req = blk_mq_rq_to_pdu(rq);
+ struct nvme_rdma_queue *queue = req->queue;
+ struct nvme_rdma_ctrl *ctrl = queue->ctrl;
- dev_warn(req->queue->ctrl->ctrl.device,
- "I/O %d QID %d timeout, reset controller\n",
- rq->tag, nvme_rdma_queue_idx(req->queue));
+ dev_warn(ctrl->ctrl.device, "I/O %d QID %d timeout\n",
+ rq->tag, nvme_rdma_queue_idx(queue));
- /* queue error recovery */
- nvme_rdma_error_recovery(req->queue->ctrl);
+ if (ctrl->ctrl.state != NVME_CTRL_LIVE) {
+ /*
+ * Teardown immediately if controller times out while starting
+ * or we are already started error recovery. all outstanding
+ * requests are completed on shutdown, so we return BLK_EH_DONE.
+ */
+ flush_work(&ctrl->err_work);
+ nvme_rdma_teardown_io_queues(ctrl, false);
+ nvme_rdma_teardown_admin_queue(ctrl, false);
+ return BLK_EH_DONE;
+ }
- /* fail with DNR on cmd timeout */
- nvme_req(rq)->status = NVME_SC_ABORT_REQ | NVME_SC_DNR;
+ dev_warn(ctrl->ctrl.device, "starting error recovery\n");
+ nvme_rdma_error_recovery(ctrl);
- return BLK_EH_DONE;
+ return BLK_EH_RESET_TIMER;
}
static blk_status_t nvme_rdma_queue_rq(struct blk_mq_hw_ctx *hctx,
--
2.19.1
From: Edward Cree <[email protected]>
[ Upstream commit 3366463513f544c12c6b88c13da4462ee9e7a1a1 ]
Use a bitmap to keep track of which partition types we've already seen;
for duplicates, return -EEXIST from efx_ef10_mtd_probe_partition() and
thus skip adding that partition.
Duplicate partitions occur because of the A/B backup scheme used by newer
sfc NICs. Prior to this patch they cause sysfs_warn_dup errors because
they have the same name, causing us not to expose any MTDs at all.
Signed-off-by: Edward Cree <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/sfc/ef10.c | 29 +++++++++++++++++++++--------
1 file changed, 21 insertions(+), 8 deletions(-)
diff --git a/drivers/net/ethernet/sfc/ef10.c b/drivers/net/ethernet/sfc/ef10.c
index 7eeac3d6cfe8..a497aace7e4f 100644
--- a/drivers/net/ethernet/sfc/ef10.c
+++ b/drivers/net/ethernet/sfc/ef10.c
@@ -6042,22 +6042,25 @@ static const struct efx_ef10_nvram_type_info efx_ef10_nvram_types[] = {
{ NVRAM_PARTITION_TYPE_LICENSE, 0, 0, "sfc_license" },
{ NVRAM_PARTITION_TYPE_PHY_MIN, 0xff, 0, "sfc_phy_fw" },
};
+#define EF10_NVRAM_PARTITION_COUNT ARRAY_SIZE(efx_ef10_nvram_types)
static int efx_ef10_mtd_probe_partition(struct efx_nic *efx,
struct efx_mcdi_mtd_partition *part,
- unsigned int type)
+ unsigned int type,
+ unsigned long *found)
{
MCDI_DECLARE_BUF(inbuf, MC_CMD_NVRAM_METADATA_IN_LEN);
MCDI_DECLARE_BUF(outbuf, MC_CMD_NVRAM_METADATA_OUT_LENMAX);
const struct efx_ef10_nvram_type_info *info;
size_t size, erase_size, outlen;
+ int type_idx = 0;
bool protected;
int rc;
- for (info = efx_ef10_nvram_types; ; info++) {
- if (info ==
- efx_ef10_nvram_types + ARRAY_SIZE(efx_ef10_nvram_types))
+ for (type_idx = 0; ; type_idx++) {
+ if (type_idx == EF10_NVRAM_PARTITION_COUNT)
return -ENODEV;
+ info = efx_ef10_nvram_types + type_idx;
if ((type & ~info->type_mask) == info->type)
break;
}
@@ -6070,6 +6073,13 @@ static int efx_ef10_mtd_probe_partition(struct efx_nic *efx,
if (protected)
return -ENODEV; /* hide it */
+ /* If we've already exposed a partition of this type, hide this
+ * duplicate. All operations on MTDs are keyed by the type anyway,
+ * so we can't act on the duplicate.
+ */
+ if (__test_and_set_bit(type_idx, found))
+ return -EEXIST;
+
part->nvram_type = type;
MCDI_SET_DWORD(inbuf, NVRAM_METADATA_IN_TYPE, type);
@@ -6098,6 +6108,7 @@ static int efx_ef10_mtd_probe_partition(struct efx_nic *efx,
static int efx_ef10_mtd_probe(struct efx_nic *efx)
{
MCDI_DECLARE_BUF(outbuf, MC_CMD_NVRAM_PARTITIONS_OUT_LENMAX);
+ DECLARE_BITMAP(found, EF10_NVRAM_PARTITION_COUNT);
struct efx_mcdi_mtd_partition *parts;
size_t outlen, n_parts_total, i, n_parts;
unsigned int type;
@@ -6126,11 +6137,13 @@ static int efx_ef10_mtd_probe(struct efx_nic *efx)
for (i = 0; i < n_parts_total; i++) {
type = MCDI_ARRAY_DWORD(outbuf, NVRAM_PARTITIONS_OUT_TYPE_ID,
i);
- rc = efx_ef10_mtd_probe_partition(efx, &parts[n_parts], type);
- if (rc == 0)
- n_parts++;
- else if (rc != -ENODEV)
+ rc = efx_ef10_mtd_probe_partition(efx, &parts[n_parts], type,
+ found);
+ if (rc == -EEXIST || rc == -ENODEV)
+ continue;
+ if (rc)
goto fail;
+ n_parts++;
}
rc = efx_mtd_add(efx, &parts[0].common, n_parts, sizeof(*parts));
--
2.19.1
From: Haiyang Zhang <[email protected]>
[ Upstream commit 7c9f335a3ff20557a92584199f3d35c7e992bbe5 ]
These assignments occur in multiple places. The patch refactor them
to a function for simplicity. It also puts the struct to heap area
for future expension.
Signed-off-by: Haiyang Zhang <[email protected]>
Reviewed-by: Michael Kelley <[email protected]>
[sl: fix up subject line]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/hyperv/netvsc_drv.c | 134 ++++++++++++++++++++------------
1 file changed, 85 insertions(+), 49 deletions(-)
diff --git a/drivers/net/hyperv/netvsc_drv.c b/drivers/net/hyperv/netvsc_drv.c
index cf36e7ff3191..4055e12fce9a 100644
--- a/drivers/net/hyperv/netvsc_drv.c
+++ b/drivers/net/hyperv/netvsc_drv.c
@@ -857,6 +857,36 @@ static void netvsc_get_channels(struct net_device *net,
}
}
+/* Alloc struct netvsc_device_info, and initialize it from either existing
+ * struct netvsc_device, or from default values.
+ */
+static struct netvsc_device_info *netvsc_devinfo_get
+ (struct netvsc_device *nvdev)
+{
+ struct netvsc_device_info *dev_info;
+
+ dev_info = kzalloc(sizeof(*dev_info), GFP_ATOMIC);
+
+ if (!dev_info)
+ return NULL;
+
+ if (nvdev) {
+ dev_info->num_chn = nvdev->num_chn;
+ dev_info->send_sections = nvdev->send_section_cnt;
+ dev_info->send_section_size = nvdev->send_section_size;
+ dev_info->recv_sections = nvdev->recv_section_cnt;
+ dev_info->recv_section_size = nvdev->recv_section_size;
+ } else {
+ dev_info->num_chn = VRSS_CHANNEL_DEFAULT;
+ dev_info->send_sections = NETVSC_DEFAULT_TX;
+ dev_info->send_section_size = NETVSC_SEND_SECTION_SIZE;
+ dev_info->recv_sections = NETVSC_DEFAULT_RX;
+ dev_info->recv_section_size = NETVSC_RECV_SECTION_SIZE;
+ }
+
+ return dev_info;
+}
+
static int netvsc_detach(struct net_device *ndev,
struct netvsc_device *nvdev)
{
@@ -942,7 +972,7 @@ static int netvsc_set_channels(struct net_device *net,
struct net_device_context *net_device_ctx = netdev_priv(net);
struct netvsc_device *nvdev = rtnl_dereference(net_device_ctx->nvdev);
unsigned int orig, count = channels->combined_count;
- struct netvsc_device_info device_info;
+ struct netvsc_device_info *device_info;
int ret;
/* We do not support separate count for rx, tx, or other */
@@ -961,24 +991,26 @@ static int netvsc_set_channels(struct net_device *net,
orig = nvdev->num_chn;
- memset(&device_info, 0, sizeof(device_info));
- device_info.num_chn = count;
- device_info.send_sections = nvdev->send_section_cnt;
- device_info.send_section_size = nvdev->send_section_size;
- device_info.recv_sections = nvdev->recv_section_cnt;
- device_info.recv_section_size = nvdev->recv_section_size;
+ device_info = netvsc_devinfo_get(nvdev);
+
+ if (!device_info)
+ return -ENOMEM;
+
+ device_info->num_chn = count;
ret = netvsc_detach(net, nvdev);
if (ret)
- return ret;
+ goto out;
- ret = netvsc_attach(net, &device_info);
+ ret = netvsc_attach(net, device_info);
if (ret) {
- device_info.num_chn = orig;
- if (netvsc_attach(net, &device_info))
+ device_info->num_chn = orig;
+ if (netvsc_attach(net, device_info))
netdev_err(net, "restoring channel setting failed\n");
}
+out:
+ kfree(device_info);
return ret;
}
@@ -1047,48 +1079,45 @@ static int netvsc_change_mtu(struct net_device *ndev, int mtu)
struct net_device *vf_netdev = rtnl_dereference(ndevctx->vf_netdev);
struct netvsc_device *nvdev = rtnl_dereference(ndevctx->nvdev);
int orig_mtu = ndev->mtu;
- struct netvsc_device_info device_info;
+ struct netvsc_device_info *device_info;
int ret = 0;
if (!nvdev || nvdev->destroy)
return -ENODEV;
+ device_info = netvsc_devinfo_get(nvdev);
+
+ if (!device_info)
+ return -ENOMEM;
+
/* Change MTU of underlying VF netdev first. */
if (vf_netdev) {
ret = dev_set_mtu(vf_netdev, mtu);
if (ret)
- return ret;
+ goto out;
}
- memset(&device_info, 0, sizeof(device_info));
- device_info.num_chn = nvdev->num_chn;
- device_info.send_sections = nvdev->send_section_cnt;
- device_info.send_section_size = nvdev->send_section_size;
- device_info.recv_sections = nvdev->recv_section_cnt;
- device_info.recv_section_size = nvdev->recv_section_size;
-
ret = netvsc_detach(ndev, nvdev);
if (ret)
goto rollback_vf;
ndev->mtu = mtu;
- ret = netvsc_attach(ndev, &device_info);
- if (ret)
- goto rollback;
-
- return 0;
+ ret = netvsc_attach(ndev, device_info);
+ if (!ret)
+ goto out;
-rollback:
/* Attempt rollback to original MTU */
ndev->mtu = orig_mtu;
- if (netvsc_attach(ndev, &device_info))
+ if (netvsc_attach(ndev, device_info))
netdev_err(ndev, "restoring mtu failed\n");
rollback_vf:
if (vf_netdev)
dev_set_mtu(vf_netdev, orig_mtu);
+out:
+ kfree(device_info);
return ret;
}
@@ -1673,7 +1702,7 @@ static int netvsc_set_ringparam(struct net_device *ndev,
{
struct net_device_context *ndevctx = netdev_priv(ndev);
struct netvsc_device *nvdev = rtnl_dereference(ndevctx->nvdev);
- struct netvsc_device_info device_info;
+ struct netvsc_device_info *device_info;
struct ethtool_ringparam orig;
u32 new_tx, new_rx;
int ret = 0;
@@ -1693,26 +1722,29 @@ static int netvsc_set_ringparam(struct net_device *ndev,
new_rx == orig.rx_pending)
return 0; /* no change */
- memset(&device_info, 0, sizeof(device_info));
- device_info.num_chn = nvdev->num_chn;
- device_info.send_sections = new_tx;
- device_info.send_section_size = nvdev->send_section_size;
- device_info.recv_sections = new_rx;
- device_info.recv_section_size = nvdev->recv_section_size;
+ device_info = netvsc_devinfo_get(nvdev);
+
+ if (!device_info)
+ return -ENOMEM;
+
+ device_info->send_sections = new_tx;
+ device_info->recv_sections = new_rx;
ret = netvsc_detach(ndev, nvdev);
if (ret)
- return ret;
+ goto out;
- ret = netvsc_attach(ndev, &device_info);
+ ret = netvsc_attach(ndev, device_info);
if (ret) {
- device_info.send_sections = orig.tx_pending;
- device_info.recv_sections = orig.rx_pending;
+ device_info->send_sections = orig.tx_pending;
+ device_info->recv_sections = orig.rx_pending;
- if (netvsc_attach(ndev, &device_info))
+ if (netvsc_attach(ndev, device_info))
netdev_err(ndev, "restoring ringparam failed");
}
+out:
+ kfree(device_info);
return ret;
}
@@ -2166,7 +2198,7 @@ static int netvsc_probe(struct hv_device *dev,
{
struct net_device *net = NULL;
struct net_device_context *net_device_ctx;
- struct netvsc_device_info device_info;
+ struct netvsc_device_info *device_info = NULL;
struct netvsc_device *nvdev;
int ret = -ENOMEM;
@@ -2213,21 +2245,21 @@ static int netvsc_probe(struct hv_device *dev,
netif_set_real_num_rx_queues(net, 1);
/* Notify the netvsc driver of the new device */
- memset(&device_info, 0, sizeof(device_info));
- device_info.num_chn = VRSS_CHANNEL_DEFAULT;
- device_info.send_sections = NETVSC_DEFAULT_TX;
- device_info.send_section_size = NETVSC_SEND_SECTION_SIZE;
- device_info.recv_sections = NETVSC_DEFAULT_RX;
- device_info.recv_section_size = NETVSC_RECV_SECTION_SIZE;
-
- nvdev = rndis_filter_device_add(dev, &device_info);
+ device_info = netvsc_devinfo_get(NULL);
+
+ if (!device_info) {
+ ret = -ENOMEM;
+ goto devinfo_failed;
+ }
+
+ nvdev = rndis_filter_device_add(dev, device_info);
if (IS_ERR(nvdev)) {
ret = PTR_ERR(nvdev);
netdev_err(net, "unable to add netvsc device (ret %d)\n", ret);
goto rndis_failed;
}
- memcpy(net->dev_addr, device_info.mac_adr, ETH_ALEN);
+ memcpy(net->dev_addr, device_info->mac_adr, ETH_ALEN);
/* We must get rtnl lock before scheduling nvdev->subchan_work,
* otherwise netvsc_subchan_work() can get rtnl lock first and wait
@@ -2265,12 +2297,16 @@ static int netvsc_probe(struct hv_device *dev,
list_add(&net_device_ctx->list, &netvsc_dev_list);
rtnl_unlock();
+
+ kfree(device_info);
return 0;
register_failed:
rtnl_unlock();
rndis_filter_device_remove(dev, nvdev);
rndis_failed:
+ kfree(device_info);
+devinfo_failed:
free_percpu(net_device_ctx->vf_stats);
no_stats:
hv_set_drvdata(dev, NULL);
--
2.19.1
From: Haiyang Zhang <[email protected]>
[ Upstream commit 17d91256898402daf4425cc541ac9cbf64574d9a ]
Changing mtu, channels, or buffer sizes ops call to netvsc_attach(),
rndis_set_subchannel(), which always reset the hash key to default
value. That will override hash key changed previously. This patch
fixes the problem by save the hash key, then restore it when we re-
add the netvsc device.
Fixes: ff4a44199012 ("netvsc: allow get/set of RSS indirection table")
Signed-off-by: Haiyang Zhang <[email protected]>
Reviewed-by: Michael Kelley <[email protected]>
[sl: fix up subject line]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/hyperv/hyperv_net.h | 10 +++++++---
drivers/net/hyperv/netvsc.c | 2 +-
drivers/net/hyperv/netvsc_drv.c | 5 ++++-
drivers/net/hyperv/rndis_filter.c | 9 +++++++--
4 files changed, 19 insertions(+), 7 deletions(-)
diff --git a/drivers/net/hyperv/hyperv_net.h b/drivers/net/hyperv/hyperv_net.h
index ef6f766f6389..e598a684700b 100644
--- a/drivers/net/hyperv/hyperv_net.h
+++ b/drivers/net/hyperv/hyperv_net.h
@@ -144,6 +144,8 @@ struct hv_netvsc_packet {
u32 total_data_buflen;
};
+#define NETVSC_HASH_KEYLEN 40
+
struct netvsc_device_info {
unsigned char mac_adr[ETH_ALEN];
u32 num_chn;
@@ -151,6 +153,8 @@ struct netvsc_device_info {
u32 recv_sections;
u32 send_section_size;
u32 recv_section_size;
+
+ u8 rss_key[NETVSC_HASH_KEYLEN];
};
enum rndis_device_state {
@@ -160,8 +164,6 @@ enum rndis_device_state {
RNDIS_DEV_DATAINITIALIZED,
};
-#define NETVSC_HASH_KEYLEN 40
-
struct rndis_device {
struct net_device *ndev;
@@ -209,7 +211,9 @@ int netvsc_recv_callback(struct net_device *net,
void netvsc_channel_cb(void *context);
int netvsc_poll(struct napi_struct *napi, int budget);
-int rndis_set_subchannel(struct net_device *ndev, struct netvsc_device *nvdev);
+int rndis_set_subchannel(struct net_device *ndev,
+ struct netvsc_device *nvdev,
+ struct netvsc_device_info *dev_info);
int rndis_filter_open(struct netvsc_device *nvdev);
int rndis_filter_close(struct netvsc_device *nvdev);
struct netvsc_device *rndis_filter_device_add(struct hv_device *dev,
diff --git a/drivers/net/hyperv/netvsc.c b/drivers/net/hyperv/netvsc.c
index 922054c1d544..1910810e55bd 100644
--- a/drivers/net/hyperv/netvsc.c
+++ b/drivers/net/hyperv/netvsc.c
@@ -84,7 +84,7 @@ static void netvsc_subchan_work(struct work_struct *w)
rdev = nvdev->extension;
if (rdev) {
- ret = rndis_set_subchannel(rdev->ndev, nvdev);
+ ret = rndis_set_subchannel(rdev->ndev, nvdev, NULL);
if (ret == 0) {
netif_device_attach(rdev->ndev);
} else {
diff --git a/drivers/net/hyperv/netvsc_drv.c b/drivers/net/hyperv/netvsc_drv.c
index 4055e12fce9a..80d9297ad9d9 100644
--- a/drivers/net/hyperv/netvsc_drv.c
+++ b/drivers/net/hyperv/netvsc_drv.c
@@ -876,6 +876,9 @@ static struct netvsc_device_info *netvsc_devinfo_get
dev_info->send_section_size = nvdev->send_section_size;
dev_info->recv_sections = nvdev->recv_section_cnt;
dev_info->recv_section_size = nvdev->recv_section_size;
+
+ memcpy(dev_info->rss_key, nvdev->extension->rss_key,
+ NETVSC_HASH_KEYLEN);
} else {
dev_info->num_chn = VRSS_CHANNEL_DEFAULT;
dev_info->send_sections = NETVSC_DEFAULT_TX;
@@ -938,7 +941,7 @@ static int netvsc_attach(struct net_device *ndev,
return PTR_ERR(nvdev);
if (nvdev->num_chn > 1) {
- ret = rndis_set_subchannel(ndev, nvdev);
+ ret = rndis_set_subchannel(ndev, nvdev, dev_info);
/* if unavailable, just proceed with one queue */
if (ret) {
diff --git a/drivers/net/hyperv/rndis_filter.c b/drivers/net/hyperv/rndis_filter.c
index a4661d396e3c..db81378e6624 100644
--- a/drivers/net/hyperv/rndis_filter.c
+++ b/drivers/net/hyperv/rndis_filter.c
@@ -1134,7 +1134,9 @@ static void netvsc_sc_open(struct vmbus_channel *new_sc)
* This breaks overlap of processing the host message for the
* new primary channel with the initialization of sub-channels.
*/
-int rndis_set_subchannel(struct net_device *ndev, struct netvsc_device *nvdev)
+int rndis_set_subchannel(struct net_device *ndev,
+ struct netvsc_device *nvdev,
+ struct netvsc_device_info *dev_info)
{
struct nvsp_message *init_packet = &nvdev->channel_init_pkt;
struct net_device_context *ndev_ctx = netdev_priv(ndev);
@@ -1175,7 +1177,10 @@ int rndis_set_subchannel(struct net_device *ndev, struct netvsc_device *nvdev)
atomic_read(&nvdev->open_chn) == nvdev->num_chn);
/* ignore failues from setting rss parameters, still have channels */
- rndis_filter_set_rss_param(rdev, netvsc_hash_key);
+ if (dev_info)
+ rndis_filter_set_rss_param(rdev, dev_info->rss_key);
+ else
+ rndis_filter_set_rss_param(rdev, netvsc_hash_key);
netif_set_real_num_tx_queues(ndev, nvdev->num_chn);
netif_set_real_num_rx_queues(ndev, nvdev->num_chn);
--
2.19.1
From: Atsushi Nemoto <[email protected]>
[ Upstream commit 17b42a20d7ca59377788c6a2409e77569570cc10 ]
The connect_local_phy should return NULL (not negative errno) on
error, since its caller expects it.
Signed-off-by: Atsushi Nemoto <[email protected]>
Acked-by: Thor Thayer <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/altera/altera_tse_main.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/altera/altera_tse_main.c b/drivers/net/ethernet/altera/altera_tse_main.c
index 02921d877c08..aa1d1f5339d2 100644
--- a/drivers/net/ethernet/altera/altera_tse_main.c
+++ b/drivers/net/ethernet/altera/altera_tse_main.c
@@ -714,8 +714,10 @@ static struct phy_device *connect_local_phy(struct net_device *dev)
phydev = phy_connect(dev, phy_id_fmt, &altera_tse_adjust_link,
priv->phy_iface);
- if (IS_ERR(phydev))
+ if (IS_ERR(phydev)) {
netdev_err(dev, "Could not attach to PHY\n");
+ phydev = NULL;
+ }
} else {
int ret;
--
2.19.1
From: Chaitanya Tata <[email protected]>
[ Upstream commit 93183bdbe73bbdd03e9566c8dc37c9d06b0d0db6 ]
Recently, DMG frequency bands have been extended till 71GHz, so extend
the range check till 20GHz (45-71GHZ), else some channels will be marked
as disabled.
Signed-off-by: Chaitanya Tata <[email protected]>
Signed-off-by: Johannes Berg <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/wireless/reg.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/net/wireless/reg.c b/net/wireless/reg.c
index ecfb1a06dbb2..cce4c16eaaa0 100644
--- a/net/wireless/reg.c
+++ b/net/wireless/reg.c
@@ -1255,7 +1255,7 @@ static bool is_valid_rd(const struct ieee80211_regdomain *rd)
* definitions (the "2.4 GHz band", the "5 GHz band" and the "60GHz band"),
* however it is safe for now to assume that a frequency rule should not be
* part of a frequency's band if the start freq or end freq are off by more
- * than 2 GHz for the 2.4 and 5 GHz bands, and by more than 10 GHz for the
+ * than 2 GHz for the 2.4 and 5 GHz bands, and by more than 20 GHz for the
* 60 GHz band.
* This resolution can be lowered and should be considered as we add
* regulatory rule support for other "bands".
@@ -1270,7 +1270,7 @@ static bool freq_in_rule_band(const struct ieee80211_freq_range *freq_range,
* with the Channel starting frequency above 45 GHz.
*/
u32 limit = freq_khz > 45 * ONE_GHZ_IN_KHZ ?
- 10 * ONE_GHZ_IN_KHZ : 2 * ONE_GHZ_IN_KHZ;
+ 20 * ONE_GHZ_IN_KHZ : 2 * ONE_GHZ_IN_KHZ;
if (abs(freq_khz - freq_range->start_freq_khz) <= limit)
return true;
if (abs(freq_khz - freq_range->end_freq_khz) <= limit)
--
2.19.1
From: Liam Mark <[email protected]>
[ Upstream commit 31eb79db420a3f94c4c45a8c0a05cd30e333f981 ]
Often userspace doesn't know when the kernel will be calling dma_buf_detach
on the buffer.
If userpace starts its CPU access at the same time as the sg list is being
freed it could end up accessing the sg list after it has been freed.
Thread A Thread B
- DMA_BUF_IOCTL_SYNC IOCT
- ion_dma_buf_begin_cpu_access
- list_for_each_entry
- ion_dma_buf_detatch
- free_duped_table
- dma_sync_sg_for_cpu
Fix this by getting the ion_buffer lock before freeing the sg table memory.
Fixes: 2a55e7b5e544 ("staging: android: ion: Call dma_map_sg for syncing and mapping")
Signed-off-by: Liam Mark <[email protected]>
Acked-by: Laura Abbott <[email protected]>
Acked-by: Andrew F. Davis <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/staging/android/ion/ion.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/staging/android/ion/ion.c b/drivers/staging/android/ion/ion.c
index 99073325b0c0..45c7f829e387 100644
--- a/drivers/staging/android/ion/ion.c
+++ b/drivers/staging/android/ion/ion.c
@@ -237,10 +237,10 @@ static void ion_dma_buf_detatch(struct dma_buf *dmabuf,
struct ion_dma_buf_attachment *a = attachment->priv;
struct ion_buffer *buffer = dmabuf->priv;
- free_duped_table(a->table);
mutex_lock(&buffer->lock);
list_del(&a->list);
mutex_unlock(&buffer->lock);
+ free_duped_table(a->table);
kfree(a);
}
--
2.19.1
From: Thomas Falcon <[email protected]>
[ Upstream commit e95d22c69b2c130ccce257b84daf283fd82d611e ]
The IBM virtual ethernet driver's polling function continues
to process frames after rescheduling NAPI, resulting in a warning
if it exhausted its budget. Do not restart polling after calling
napi_reschedule. Instead let frames be processed in the following
instance.
Signed-off-by: Thomas Falcon <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/ibm/ibmveth.c | 2 --
1 file changed, 2 deletions(-)
diff --git a/drivers/net/ethernet/ibm/ibmveth.c b/drivers/net/ethernet/ibm/ibmveth.c
index 098d8764c0ea..dd71d5db7274 100644
--- a/drivers/net/ethernet/ibm/ibmveth.c
+++ b/drivers/net/ethernet/ibm/ibmveth.c
@@ -1313,7 +1313,6 @@ static int ibmveth_poll(struct napi_struct *napi, int budget)
unsigned long lpar_rc;
u16 mss = 0;
-restart_poll:
while (frames_processed < budget) {
if (!ibmveth_rxq_pending_buffer(adapter))
break;
@@ -1401,7 +1400,6 @@ static int ibmveth_poll(struct napi_struct *napi, int budget)
napi_reschedule(napi)) {
lpar_rc = h_vio_signal(adapter->vdev->unit_address,
VIO_IRQ_DISABLE);
- goto restart_poll;
}
}
--
2.19.1
From: Matthias Kaehlcke <[email protected]>
[ Upstream commit e8a6ca808c5ed1e2b43ab25f1f2cbd43a7574f73 ]
The geni set/get_mctrl() functions currently do nothing unless
hardware flow control is enabled. Remove this arbitrary limitation.
Suggested-by: Johan Hovold <[email protected]>
Fixes: 8a8a66a1a18a ("tty: serial: qcom_geni_serial: Add support for flow control")
Signed-off-by: Matthias Kaehlcke <[email protected]>
Reviewed-by: Johan Hovold <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/tty/serial/qcom_geni_serial.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/tty/serial/qcom_geni_serial.c b/drivers/tty/serial/qcom_geni_serial.c
index d3b5261ee80a..76e0ad7251e1 100644
--- a/drivers/tty/serial/qcom_geni_serial.c
+++ b/drivers/tty/serial/qcom_geni_serial.c
@@ -221,7 +221,7 @@ static unsigned int qcom_geni_serial_get_mctrl(struct uart_port *uport)
unsigned int mctrl = TIOCM_DSR | TIOCM_CAR;
u32 geni_ios;
- if (uart_console(uport) || !uart_cts_enabled(uport)) {
+ if (uart_console(uport)) {
mctrl |= TIOCM_CTS;
} else {
geni_ios = readl_relaxed(uport->membase + SE_GENI_IOS);
@@ -237,7 +237,7 @@ static void qcom_geni_serial_set_mctrl(struct uart_port *uport,
{
u32 uart_manual_rfr = 0;
- if (uart_console(uport) || !uart_cts_enabled(uport))
+ if (uart_console(uport))
return;
if (!(mctrl & TIOCM_RTS))
--
2.19.1
From: Tomonori Sakita <[email protected]>
[ Upstream commit 815d835b7ba46685c316b000013367dacb2b461b ]
Using over-sampling ratio, lpuart can accept baud rate upto uartclk / 4.
Signed-off-by: Tomonori Sakita <[email protected]>
Signed-off-by: Atsushi Nemoto <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/tty/serial/fsl_lpuart.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/tty/serial/fsl_lpuart.c b/drivers/tty/serial/fsl_lpuart.c
index 00c220e4f43c..989b95af1b95 100644
--- a/drivers/tty/serial/fsl_lpuart.c
+++ b/drivers/tty/serial/fsl_lpuart.c
@@ -1693,7 +1693,7 @@ lpuart32_set_termios(struct uart_port *port, struct ktermios *termios,
}
/* ask the core to calculate the divisor */
- baud = uart_get_baud_rate(port, termios, old, 50, port->uartclk / 16);
+ baud = uart_get_baud_rate(port, termios, old, 50, port->uartclk / 4);
spin_lock_irqsave(&sport->port.lock, flags);
--
2.19.1
From: Haiyang Zhang <[email protected]>
[ Upstream commit b4a10c750424e01b5e37372fef0a574ebf7b56c3 ]
Hyper-V hosts require us to disable RSS before changing RSS key,
otherwise the changing request will fail. This patch fixes the
coding error.
Fixes: ff4a44199012 ("netvsc: allow get/set of RSS indirection table")
Reported-by: Wei Hu <[email protected]>
Signed-off-by: Haiyang Zhang <[email protected]>
Reviewed-by: Michael Kelley <[email protected]>
[sl: fix up subject line]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/hyperv/rndis_filter.c | 25 +++++++++++++++++++------
1 file changed, 19 insertions(+), 6 deletions(-)
diff --git a/drivers/net/hyperv/rndis_filter.c b/drivers/net/hyperv/rndis_filter.c
index 8b537a049c1e..a4661d396e3c 100644
--- a/drivers/net/hyperv/rndis_filter.c
+++ b/drivers/net/hyperv/rndis_filter.c
@@ -774,8 +774,8 @@ rndis_filter_set_offload_params(struct net_device *ndev,
return ret;
}
-int rndis_filter_set_rss_param(struct rndis_device *rdev,
- const u8 *rss_key)
+static int rndis_set_rss_param_msg(struct rndis_device *rdev,
+ const u8 *rss_key, u16 flag)
{
struct net_device *ndev = rdev->ndev;
struct rndis_request *request;
@@ -804,7 +804,7 @@ int rndis_filter_set_rss_param(struct rndis_device *rdev,
rssp->hdr.type = NDIS_OBJECT_TYPE_RSS_PARAMETERS;
rssp->hdr.rev = NDIS_RECEIVE_SCALE_PARAMETERS_REVISION_2;
rssp->hdr.size = sizeof(struct ndis_recv_scale_param);
- rssp->flag = 0;
+ rssp->flag = flag;
rssp->hashinfo = NDIS_HASH_FUNC_TOEPLITZ | NDIS_HASH_IPV4 |
NDIS_HASH_TCP_IPV4 | NDIS_HASH_IPV6 |
NDIS_HASH_TCP_IPV6;
@@ -829,9 +829,12 @@ int rndis_filter_set_rss_param(struct rndis_device *rdev,
wait_for_completion(&request->wait_event);
set_complete = &request->response_msg.msg.set_complete;
- if (set_complete->status == RNDIS_STATUS_SUCCESS)
- memcpy(rdev->rss_key, rss_key, NETVSC_HASH_KEYLEN);
- else {
+ if (set_complete->status == RNDIS_STATUS_SUCCESS) {
+ if (!(flag & NDIS_RSS_PARAM_FLAG_DISABLE_RSS) &&
+ !(flag & NDIS_RSS_PARAM_FLAG_HASH_KEY_UNCHANGED))
+ memcpy(rdev->rss_key, rss_key, NETVSC_HASH_KEYLEN);
+
+ } else {
netdev_err(ndev, "Fail to set RSS parameters:0x%x\n",
set_complete->status);
ret = -EINVAL;
@@ -842,6 +845,16 @@ int rndis_filter_set_rss_param(struct rndis_device *rdev,
return ret;
}
+int rndis_filter_set_rss_param(struct rndis_device *rdev,
+ const u8 *rss_key)
+{
+ /* Disable RSS before change */
+ rndis_set_rss_param_msg(rdev, rss_key,
+ NDIS_RSS_PARAM_FLAG_DISABLE_RSS);
+
+ return rndis_set_rss_param_msg(rdev, rss_key, 0);
+}
+
static int rndis_filter_query_device_link_status(struct rndis_device *dev,
struct netvsc_device *net_device)
{
--
2.19.1
From: Pavel Shilovsky <[email protected]>
[ Upstream commit 0fd1d37b0501efc6e295f56ab55cdaff784aa50c ]
If we don't receive a response we can't assume that the server
granted one credit. Assume zero credits in such cases.
Signed-off-by: Pavel Shilovsky <[email protected]>
Reviewed-by: Ronnie Sahlberg <[email protected]>
Signed-off-by: Steve French <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/cifs/smb2pdu.c | 15 +++++++++++----
1 file changed, 11 insertions(+), 4 deletions(-)
diff --git a/fs/cifs/smb2pdu.c b/fs/cifs/smb2pdu.c
index d1ae7cdb236d..3c44c51310c4 100644
--- a/fs/cifs/smb2pdu.c
+++ b/fs/cifs/smb2pdu.c
@@ -2834,9 +2834,10 @@ smb2_echo_callback(struct mid_q_entry *mid)
{
struct TCP_Server_Info *server = mid->callback_data;
struct smb2_echo_rsp *rsp = (struct smb2_echo_rsp *)mid->resp_buf;
- unsigned int credits_received = 1;
+ unsigned int credits_received = 0;
- if (mid->mid_state == MID_RESPONSE_RECEIVED)
+ if (mid->mid_state == MID_RESPONSE_RECEIVED
+ || mid->mid_state == MID_RESPONSE_MALFORMED)
credits_received = le16_to_cpu(rsp->sync_hdr.CreditRequest);
DeleteMidQEntry(mid);
@@ -3093,7 +3094,7 @@ smb2_readv_callback(struct mid_q_entry *mid)
struct TCP_Server_Info *server = tcon->ses->server;
struct smb2_sync_hdr *shdr =
(struct smb2_sync_hdr *)rdata->iov[0].iov_base;
- unsigned int credits_received = 1;
+ unsigned int credits_received = 0;
struct smb_rqst rqst = { .rq_iov = rdata->iov,
.rq_nvec = 2,
.rq_pages = rdata->pages,
@@ -3132,6 +3133,9 @@ smb2_readv_callback(struct mid_q_entry *mid)
task_io_account_read(rdata->got_bytes);
cifs_stats_bytes_read(tcon, rdata->got_bytes);
break;
+ case MID_RESPONSE_MALFORMED:
+ credits_received = le16_to_cpu(shdr->CreditRequest);
+ /* fall through */
default:
if (rdata->result != -ENODATA)
rdata->result = -EIO;
@@ -3325,7 +3329,7 @@ smb2_writev_callback(struct mid_q_entry *mid)
struct cifs_tcon *tcon = tlink_tcon(wdata->cfile->tlink);
unsigned int written;
struct smb2_write_rsp *rsp = (struct smb2_write_rsp *)mid->resp_buf;
- unsigned int credits_received = 1;
+ unsigned int credits_received = 0;
switch (mid->mid_state) {
case MID_RESPONSE_RECEIVED:
@@ -3353,6 +3357,9 @@ smb2_writev_callback(struct mid_q_entry *mid)
case MID_RETRY_NEEDED:
wdata->result = -EAGAIN;
break;
+ case MID_RESPONSE_MALFORMED:
+ credits_received = le16_to_cpu(rsp->sync_hdr.CreditRequest);
+ /* fall through */
default:
wdata->result = -EIO;
break;
--
2.19.1
From: Mike Snitzer <[email protected]>
[ Upstream commit 57c36519e4b949f89381053f7283f5d605595b42 ]
DM's clone_bio() now benefits from using bio_trim() by fixing the fact
that clone_bio() wasn't clearing BIO_SEG_VALID like bio_trim() does;
which triggers blk_recount_segments() via bio_phys_segments().
Reviewed-by: Ming Lei <[email protected]>
Signed-off-by: Mike Snitzer <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/md/dm.c | 8 ++------
1 file changed, 2 insertions(+), 6 deletions(-)
diff --git a/drivers/md/dm.c b/drivers/md/dm.c
index 63a7c416b224..7138e69d40e0 100644
--- a/drivers/md/dm.c
+++ b/drivers/md/dm.c
@@ -1318,7 +1318,7 @@ static int clone_bio(struct dm_target_io *tio, struct bio *bio,
__bio_clone_fast(clone, bio);
- if (unlikely(bio_integrity(bio) != NULL)) {
+ if (bio_integrity(bio)) {
int r;
if (unlikely(!dm_target_has_integrity(tio->ti->type) &&
@@ -1334,11 +1334,7 @@ static int clone_bio(struct dm_target_io *tio, struct bio *bio,
return r;
}
- bio_advance(clone, to_bytes(sector - clone->bi_iter.bi_sector));
- clone->bi_iter.bi_size = to_bytes(len);
-
- if (unlikely(bio_integrity(bio) != NULL))
- bio_integrity_trim(clone);
+ bio_trim(clone, sector - clone->bi_iter.bi_sector, len);
return 0;
}
--
2.19.1
From: Peter Zijlstra <[email protected]>
[ Upstream commit 4c4e3731564c8945ac5ac90fc2a1e1f21cb79c92 ]
Notable cmpxchg() does not provide ordering when it fails, however
wake_q_add() requires ordering in this specific case too. Without this
it would be possible for the concurrent wakeup to not observe our
prior state.
Andrea Parri provided:
C wake_up_q-wake_q_add
{
int next = 0;
int y = 0;
}
P0(int *next, int *y)
{
int r0;
/* in wake_up_q() */
WRITE_ONCE(*next, 1); /* node->next = NULL */
smp_mb(); /* implied by wake_up_process() */
r0 = READ_ONCE(*y);
}
P1(int *next, int *y)
{
int r1;
/* in wake_q_add() */
WRITE_ONCE(*y, 1); /* wake_cond = true */
smp_mb__before_atomic();
r1 = cmpxchg_relaxed(next, 1, 2);
}
exists (0:r0=0 /\ 1:r1=0)
This "exists" clause cannot be satisfied according to the LKMM:
Test wake_up_q-wake_q_add Allowed
States 3
0:r0=0; 1:r1=1;
0:r0=1; 1:r1=0;
0:r0=1; 1:r1=1;
No
Witnesses
Positive: 0 Negative: 3
Condition exists (0:r0=0 /\ 1:r1=0)
Observation wake_up_q-wake_q_add Never 0 3
Reported-by: Yongji Xie <[email protected]>
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Cc: Davidlohr Bueso <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Waiman Long <[email protected]>
Cc: Will Deacon <[email protected]>
Signed-off-by: Ingo Molnar <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
kernel/sched/core.c | 7 ++++---
1 file changed, 4 insertions(+), 3 deletions(-)
diff --git a/kernel/sched/core.c b/kernel/sched/core.c
index 6fedf3a98581..463af32de32c 100644
--- a/kernel/sched/core.c
+++ b/kernel/sched/core.c
@@ -405,10 +405,11 @@ void wake_q_add(struct wake_q_head *head, struct task_struct *task)
* its already queued (either by us or someone else) and will get the
* wakeup due to that.
*
- * This cmpxchg() executes a full barrier, which pairs with the full
- * barrier executed by the wakeup in wake_up_q().
+ * In order to ensure that a pending wakeup will observe our pending
+ * state, even in the failed case, an explicit smp_mb() must be used.
*/
- if (cmpxchg(&node->next, NULL, WAKE_Q_TAIL))
+ smp_mb__before_atomic();
+ if (cmpxchg_relaxed(&node->next, NULL, WAKE_Q_TAIL))
return;
get_task_struct(task);
--
2.19.1
From: Vineet Gupta <[email protected]>
[ Upstream commit ab6c03676cb190156603cf4c5ecf97aa406c9c53 ]
and use smaller/on-stack buffer instead
The motivation for this change was lockdep splat like below.
| potentially unexpected fatal signal 11.
| BUG: sleeping function called from invalid context at ../mm/page_alloc.c:4317
| in_atomic(): 1, irqs_disabled(): 0, pid: 57, name: segv
| no locks held by segv/57.
| Preemption disabled at:
| [<8182f17e>] get_signal+0x4a6/0x7c4
| CPU: 0 PID: 57 Comm: segv Not tainted 4.17.0+ #23
|
| Stack Trace:
| arc_unwind_core.constprop.1+0xd0/0xf4
| __might_sleep+0x1f6/0x234
| __get_free_pages+0x174/0xca0
| show_regs+0x22/0x330
| get_signal+0x4ac/0x7c4 # print_fatal_signals() -> preempt_disable()
| do_signal+0x30/0x224
| resume_user_mode_begin+0x90/0xd8
So signal handling core calls show_regs() with preemption disabled but
an ensuing GFP_KERNEL page allocator call is flagged by lockdep.
We could have switched to GFP_NOWAIT, but turns out that is not enough
anways and eliding page allocator call leads to less code and
instruction traces to sift thru when debugging pesky crashes.
FWIW, this patch doesn't cure the lockdep splat (which next patch does).
Reviewed-by: William Kucharski <[email protected]>
Signed-off-by: Vineet Gupta <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arc/kernel/troubleshoot.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/arch/arc/kernel/troubleshoot.c b/arch/arc/kernel/troubleshoot.c
index e8d9fb452346..5c6663321e87 100644
--- a/arch/arc/kernel/troubleshoot.c
+++ b/arch/arc/kernel/troubleshoot.c
@@ -18,6 +18,8 @@
#include <asm/arcregs.h>
#include <asm/irqflags.h>
+#define ARC_PATH_MAX 256
+
/*
* Common routine to print scratch regs (r0-r12) or callee regs (r13-r25)
* -Prints 3 regs per line and a CR.
@@ -58,11 +60,12 @@ static void show_callee_regs(struct callee_regs *cregs)
print_reg_file(&(cregs->r13), 13);
}
-static void print_task_path_n_nm(struct task_struct *tsk, char *buf)
+static void print_task_path_n_nm(struct task_struct *tsk)
{
char *path_nm = NULL;
struct mm_struct *mm;
struct file *exe_file;
+ char buf[ARC_PATH_MAX];
mm = get_task_mm(tsk);
if (!mm)
@@ -72,7 +75,7 @@ static void print_task_path_n_nm(struct task_struct *tsk, char *buf)
mmput(mm);
if (exe_file) {
- path_nm = file_path(exe_file, buf, 255);
+ path_nm = file_path(exe_file, buf, ARC_PATH_MAX-1);
fput(exe_file);
}
@@ -80,10 +83,9 @@ static void print_task_path_n_nm(struct task_struct *tsk, char *buf)
pr_info("Path: %s\n", !IS_ERR(path_nm) ? path_nm : "?");
}
-static void show_faulting_vma(unsigned long address, char *buf)
+static void show_faulting_vma(unsigned long address)
{
struct vm_area_struct *vma;
- char *nm = buf;
struct mm_struct *active_mm = current->active_mm;
/* can't use print_vma_addr() yet as it doesn't check for
@@ -96,8 +98,11 @@ static void show_faulting_vma(unsigned long address, char *buf)
* if the container VMA is not found
*/
if (vma && (vma->vm_start <= address)) {
+ char buf[ARC_PATH_MAX];
+ char *nm = "?";
+
if (vma->vm_file) {
- nm = file_path(vma->vm_file, buf, PAGE_SIZE - 1);
+ nm = file_path(vma->vm_file, buf, ARC_PATH_MAX-1);
if (IS_ERR(nm))
nm = "?";
}
@@ -173,13 +178,8 @@ void show_regs(struct pt_regs *regs)
{
struct task_struct *tsk = current;
struct callee_regs *cregs;
- char *buf;
- buf = (char *)__get_free_page(GFP_KERNEL);
- if (!buf)
- return;
-
- print_task_path_n_nm(tsk, buf);
+ print_task_path_n_nm(tsk);
show_regs_print_info(KERN_INFO);
show_ecr_verbose(regs);
@@ -189,7 +189,7 @@ void show_regs(struct pt_regs *regs)
(void *)regs->blink, (void *)regs->ret);
if (user_mode(regs))
- show_faulting_vma(regs->ret, buf); /* faulting code, not data */
+ show_faulting_vma(regs->ret); /* faulting code, not data */
pr_info("[STAT32]: 0x%08lx", regs->status32);
@@ -221,8 +221,6 @@ void show_regs(struct pt_regs *regs)
cregs = (struct callee_regs *)current->thread.callee_reg;
if (cregs)
show_callee_regs(cregs);
-
- free_page((unsigned long)buf);
}
void show_kernel_fault_diag(const char *str, struct pt_regs *regs,
--
2.19.1
From: "Ewan D. Milne" <[email protected]>
[ Upstream commit c41f59884be5cca293ed61f3d64637dbba3a6381 ]
We cannot wait on a completion object in the lpfc_nvme_targetport structure
in the _destroy_targetport() code path because the NVMe/fc transport will
free that structure immediately after the .targetport_delete() callback.
This results in a use-after-free, and a hang if slub_debug=FZPU is enabled.
Fix this by putting the completion on the stack.
Signed-off-by: Ewan D. Milne <[email protected]>
Acked-by: James Smart <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/scsi/lpfc/lpfc_nvmet.c | 8 +++++---
drivers/scsi/lpfc/lpfc_nvmet.h | 2 +-
2 files changed, 6 insertions(+), 4 deletions(-)
diff --git a/drivers/scsi/lpfc/lpfc_nvmet.c b/drivers/scsi/lpfc/lpfc_nvmet.c
index 6245f442d784..95fee83090eb 100644
--- a/drivers/scsi/lpfc/lpfc_nvmet.c
+++ b/drivers/scsi/lpfc/lpfc_nvmet.c
@@ -1003,7 +1003,8 @@ lpfc_nvmet_targetport_delete(struct nvmet_fc_target_port *targetport)
struct lpfc_nvmet_tgtport *tport = targetport->private;
/* release any threads waiting for the unreg to complete */
- complete(&tport->tport_unreg_done);
+ if (tport->phba->targetport)
+ complete(tport->tport_unreg_cmp);
}
static void
@@ -1692,6 +1693,7 @@ lpfc_nvmet_destroy_targetport(struct lpfc_hba *phba)
struct lpfc_nvmet_tgtport *tgtp;
struct lpfc_queue *wq;
uint32_t qidx;
+ DECLARE_COMPLETION_ONSTACK(tport_unreg_cmp);
if (phba->nvmet_support == 0)
return;
@@ -1701,9 +1703,9 @@ lpfc_nvmet_destroy_targetport(struct lpfc_hba *phba)
wq = phba->sli4_hba.nvme_wq[qidx];
lpfc_nvmet_wqfull_flush(phba, wq, NULL);
}
- init_completion(&tgtp->tport_unreg_done);
+ tgtp->tport_unreg_cmp = &tport_unreg_cmp;
nvmet_fc_unregister_targetport(phba->targetport);
- wait_for_completion_timeout(&tgtp->tport_unreg_done, 5);
+ wait_for_completion_timeout(&tport_unreg_cmp, 5);
lpfc_nvmet_cleanup_io_context(phba);
}
phba->targetport = NULL;
diff --git a/drivers/scsi/lpfc/lpfc_nvmet.h b/drivers/scsi/lpfc/lpfc_nvmet.h
index 1aaff63f1f41..0ec1082ce7ef 100644
--- a/drivers/scsi/lpfc/lpfc_nvmet.h
+++ b/drivers/scsi/lpfc/lpfc_nvmet.h
@@ -34,7 +34,7 @@
/* Used for NVME Target */
struct lpfc_nvmet_tgtport {
struct lpfc_hba *phba;
- struct completion tport_unreg_done;
+ struct completion *tport_unreg_cmp;
/* Stats counters - lpfc_nvmet_unsol_ls_buffer */
atomic_t rcv_ls_req_in;
--
2.19.1
From: Ernesto A. Fernández <[email protected]>
[ Upstream commit 8b9433eb4de3c26a9226c981c283f9f4896ae030 ]
On a DIO_SKIP_HOLES filesystem, the ->get_block() method is currently
not allowed to create blocks for an empty inode. This confusion comes
from trying to bit shift a negative number, so check the size of the
inode first.
The problem is most visible for hfsplus, because the fallback to
buffered I/O doesn't happen and the write fails with EIO. This is in
part the fault of the module, because it gives a wrong return value on
->get_block(); that will be fixed in a separate patch.
Reviewed-by: Jeff Moyer <[email protected]>
Reviewed-by: Jan Kara <[email protected]>
Signed-off-by: Ernesto A. Fernández <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/direct-io.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/fs/direct-io.c b/fs/direct-io.c
index 41a0e97252ae..7d3f2c1d141d 100644
--- a/fs/direct-io.c
+++ b/fs/direct-io.c
@@ -679,6 +679,7 @@ static int get_more_blocks(struct dio *dio, struct dio_submit *sdio,
unsigned long fs_count; /* Number of filesystem-sized blocks */
int create;
unsigned int i_blkbits = sdio->blkbits + sdio->blkfactor;
+ loff_t i_size;
/*
* If there was a memory error and we've overwritten all the
@@ -708,8 +709,8 @@ static int get_more_blocks(struct dio *dio, struct dio_submit *sdio,
*/
create = dio->op == REQ_OP_WRITE;
if (dio->flags & DIO_SKIP_HOLES) {
- if (fs_startblk <= ((i_size_read(dio->inode) - 1) >>
- i_blkbits))
+ i_size = i_size_read(dio->inode);
+ if (i_size && fs_startblk <= (i_size - 1) >> i_blkbits)
create = 0;
}
--
2.19.1
From: Peter Zijlstra <[email protected]>
[ Upstream commit b061c38bef43406df8e73c5be06cbfacad5ee6ad ]
We must not rely on wake_q_add() to delay the wakeup; in particular
commit:
1d0dcb3ad9d3 ("futex: Implement lockless wakeups")
moved wake_q_add() before smp_store_release(&q->lock_ptr, NULL), which
could result in futex_wait() waking before observing ->lock_ptr ==
NULL and going back to sleep again.
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Fixes: 1d0dcb3ad9d3 ("futex: Implement lockless wakeups")
Signed-off-by: Ingo Molnar <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
kernel/futex.c | 13 ++++++++-----
1 file changed, 8 insertions(+), 5 deletions(-)
diff --git a/kernel/futex.c b/kernel/futex.c
index 5cc8083a4c89..6189292244a3 100644
--- a/kernel/futex.c
+++ b/kernel/futex.c
@@ -1444,11 +1444,7 @@ static void mark_wake_futex(struct wake_q_head *wake_q, struct futex_q *q)
if (WARN(q->pi_state || q->rt_waiter, "refusing to wake PI futex\n"))
return;
- /*
- * Queue the task for later wakeup for after we've released
- * the hb->lock. wake_q_add() grabs reference to p.
- */
- wake_q_add(wake_q, p);
+ get_task_struct(p);
__unqueue_futex(q);
/*
* The waiting task can free the futex_q as soon as q->lock_ptr = NULL
@@ -1458,6 +1454,13 @@ static void mark_wake_futex(struct wake_q_head *wake_q, struct futex_q *q)
* plist_del in __unqueue_futex().
*/
smp_store_release(&q->lock_ptr, NULL);
+
+ /*
+ * Queue the task for later wakeup for after we've released
+ * the hb->lock. wake_q_add() grabs reference to p.
+ */
+ wake_q_add(wake_q, p);
+ put_task_struct(p);
}
/*
--
2.19.1
From: Prateek Sood <[email protected]>
[ Upstream commit 6dc080eeb2ba01973bfff0d79844d7a59e12542e ]
For some peculiar reason rcuwait_wake_up() has the right barrier in
the comment, but not in the code.
This mistake has been observed to cause a deadlock in the following
situation:
P1 P2
percpu_up_read() percpu_down_write()
rcu_sync_is_idle() // false
rcu_sync_enter()
...
__percpu_up_read()
[S] ,- __this_cpu_dec(*sem->read_count)
| smp_rmb();
[L] | task = rcu_dereference(w->task) // NULL
|
| [S] w->task = current
| smp_mb();
| [L] readers_active_check() // fail
`-> <store happens here>
Where the smp_rmb() (obviously) fails to constrain the store.
[ peterz: Added changelog. ]
Signed-off-by: Prateek Sood <[email protected]>
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Reviewed-by: Andrea Parri <[email protected]>
Acked-by: Davidlohr Bueso <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Fixes: 8f95c90ceb54 ("sched/wait, RCU: Introduce rcuwait machinery")
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Ingo Molnar <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
kernel/exit.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/kernel/exit.c b/kernel/exit.c
index 55b4fa6d01eb..d607e23fd0c3 100644
--- a/kernel/exit.c
+++ b/kernel/exit.c
@@ -307,7 +307,7 @@ void rcuwait_wake_up(struct rcuwait *w)
* MB (A) MB (B)
* [L] cond [L] tsk
*/
- smp_rmb(); /* (B) */
+ smp_mb(); /* (B) */
/*
* Avoid using task_rcu_dereference() magic as long as we are careful,
--
2.19.1
From: Nathan Chancellor <[email protected]>
[ Upstream commit 97715058b70da1262fd07798c8b2e3e894f759dd ]
When CONFIG_NO_AUTO_INLINE was present in linux-next (which added
'-fno-inline-functions' to KBUILD_CFLAGS), an allyesconfig build with
Clang failed at the modpost stage:
ERROR: "is_broadcast_mac_addr" [drivers/staging/rtl8723bs/r8723bs.ko] undefined!
ERROR: "is_zero_mac_addr" [drivers/staging/rtl8723bs/r8723bs.ko] undefined!
ERROR: "is_multicast_mac_addr" [drivers/staging/rtl8723bs/r8723bs.ko] undefined!
These functions were marked as extern inline, meaning that if inlining
doesn't happen, the function will be undefined, as it is above.
This happens to work with GCC because the '-fno-inline-functions' option
respects the __inline attribute so all instances of these functions are
inlined as expected and the definition doesn't actually matter. However,
with Clang and '-fno-inline-functions', a function has to be marked with
the __always_inline attribute to be considered for inlining, which none
of these functions are. Clang tries to find the symbol definition
elsewhere as it was told and fails, which trickles down to modpost.
To make sure that this code compiles regardless of compiler and make the
intention of the code clearer, use 'static' to ensure these functions
are always defined, regardless of inlining. Additionally, silence a
checkpatch warning by switching from '__inline' to 'inline'.
Signed-off-by: Nathan Chancellor <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/staging/rtl8723bs/include/ieee80211.h | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/staging/rtl8723bs/include/ieee80211.h b/drivers/staging/rtl8723bs/include/ieee80211.h
index bcc8dfa8e672..9efb4dcb9d3a 100644
--- a/drivers/staging/rtl8723bs/include/ieee80211.h
+++ b/drivers/staging/rtl8723bs/include/ieee80211.h
@@ -850,18 +850,18 @@ enum ieee80211_state {
#define IP_FMT "%pI4"
#define IP_ARG(x) (x)
-extern __inline int is_multicast_mac_addr(const u8 *addr)
+static inline int is_multicast_mac_addr(const u8 *addr)
{
return ((addr[0] != 0xff) && (0x01 & addr[0]));
}
-extern __inline int is_broadcast_mac_addr(const u8 *addr)
+static inline int is_broadcast_mac_addr(const u8 *addr)
{
return ((addr[0] == 0xff) && (addr[1] == 0xff) && (addr[2] == 0xff) && \
(addr[3] == 0xff) && (addr[4] == 0xff) && (addr[5] == 0xff));
}
-extern __inline int is_zero_mac_addr(const u8 *addr)
+static inline int is_zero_mac_addr(const u8 *addr)
{
return ((addr[0] == 0x00) && (addr[1] == 0x00) && (addr[2] == 0x00) && \
(addr[3] == 0x00) && (addr[4] == 0x00) && (addr[5] == 0x00));
--
2.19.1
From: Priit Laes <[email protected]>
[ Upstream commit 5e1bc251cebc84b41b8eb5d2434e54d939a85430 ]
Although TMDS clock is required for HDMI to properly function,
nobody called clk_prepare_enable(). This fixes reference counting
issues and makes sure clock is running when it needs to be running.
Due to TDMS clock being parent clock for DDC clock, TDMS clock
was turned on/off for each EDID probe, causing spurious failures
for certain HDMI/DVI screens.
Fixes: 9c5681011a0c ("drm/sun4i: Add HDMI support")
Signed-off-by: Priit Laes <[email protected]>
[Maxime: Moved the TMDS clock enable earlier]
Signed-off-by: Maxime Ripard <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/sun4i/sun4i_hdmi_enc.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/drivers/gpu/drm/sun4i/sun4i_hdmi_enc.c b/drivers/gpu/drm/sun4i/sun4i_hdmi_enc.c
index 061d2e0d9011..416da5376701 100644
--- a/drivers/gpu/drm/sun4i/sun4i_hdmi_enc.c
+++ b/drivers/gpu/drm/sun4i/sun4i_hdmi_enc.c
@@ -92,6 +92,8 @@ static void sun4i_hdmi_disable(struct drm_encoder *encoder)
val = readl(hdmi->base + SUN4I_HDMI_VID_CTRL_REG);
val &= ~SUN4I_HDMI_VID_CTRL_ENABLE;
writel(val, hdmi->base + SUN4I_HDMI_VID_CTRL_REG);
+
+ clk_disable_unprepare(hdmi->tmds_clk);
}
static void sun4i_hdmi_enable(struct drm_encoder *encoder)
@@ -102,6 +104,8 @@ static void sun4i_hdmi_enable(struct drm_encoder *encoder)
DRM_DEBUG_DRIVER("Enabling the HDMI Output\n");
+ clk_prepare_enable(hdmi->tmds_clk);
+
sun4i_hdmi_setup_avi_infoframes(hdmi, mode);
val |= SUN4I_HDMI_PKT_CTRL_TYPE(0, SUN4I_HDMI_PKT_AVI);
val |= SUN4I_HDMI_PKT_CTRL_TYPE(1, SUN4I_HDMI_PKT_END);
--
2.19.1
From: Alban Bedel <[email protected]>
[ Upstream commit 009808154c69c48d5b41fc8cf5ad5ab5704efd8f ]
In the power on function the error path doesn't return the suspend
override to its proper state. It should should deassert this reset
line to enable the suspend override.
Signed-off-by: Alban Bedel <[email protected]>
Signed-off-by: Kishon Vijay Abraham I <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/phy/qualcomm/phy-ath79-usb.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/phy/qualcomm/phy-ath79-usb.c b/drivers/phy/qualcomm/phy-ath79-usb.c
index 6fd6e07ab345..f7d64f3910b4 100644
--- a/drivers/phy/qualcomm/phy-ath79-usb.c
+++ b/drivers/phy/qualcomm/phy-ath79-usb.c
@@ -31,7 +31,7 @@ static int ath79_usb_phy_power_on(struct phy *phy)
err = reset_control_deassert(priv->reset);
if (err && priv->no_suspend_override)
- reset_control_assert(priv->no_suspend_override);
+ reset_control_deassert(priv->no_suspend_override);
return err;
}
--
2.19.1
From: Geert Uytterhoeven <[email protected]>
[ Upstream commit 508cacd7da6659ae7b7bdd0a335f675422277758 ]
With gcc 7.3.0:
gpio-mockup-chardev.c: In function ‘get_debugfs’:
gpio-mockup-chardev.c:62:3: warning: ignoring return value of ‘asprintf’, declared with attribute warn_unused_result [-Wunused-result]
asprintf(path, "%s/gpio", mnt_fs_get_target(fs));
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Handle asprintf() failures to fix this.
Signed-off-by: Geert Uytterhoeven <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
tools/testing/selftests/gpio/gpio-mockup-chardev.c | 9 ++++++---
1 file changed, 6 insertions(+), 3 deletions(-)
diff --git a/tools/testing/selftests/gpio/gpio-mockup-chardev.c b/tools/testing/selftests/gpio/gpio-mockup-chardev.c
index f8d468f54e98..aaa1e9f083c3 100644
--- a/tools/testing/selftests/gpio/gpio-mockup-chardev.c
+++ b/tools/testing/selftests/gpio/gpio-mockup-chardev.c
@@ -37,7 +37,7 @@ static int get_debugfs(char **path)
struct libmnt_table *tb;
struct libmnt_iter *itr = NULL;
struct libmnt_fs *fs;
- int found = 0;
+ int found = 0, ret;
cxt = mnt_new_context();
if (!cxt)
@@ -58,8 +58,11 @@ static int get_debugfs(char **path)
break;
}
}
- if (found)
- asprintf(path, "%s/gpio", mnt_fs_get_target(fs));
+ if (found) {
+ ret = asprintf(path, "%s/gpio", mnt_fs_get_target(fs));
+ if (ret < 0)
+ err(EXIT_FAILURE, "failed to format string");
+ }
mnt_free_iter(itr);
mnt_free_context(cxt);
--
2.19.1
From: Xie Yongji <[email protected]>
[ Upstream commit e158488be27b157802753a59b336142dc0eb0380 ]
Because wake_q_add() can imply an immediate wakeup (cmpxchg failure
case), we must not rely on the wakeup being delayed. However, commit:
e38513905eea ("locking/rwsem: Rework zeroing reader waiter->task")
relies on exactly that behaviour in that the wakeup must not happen
until after we clear waiter->task.
[ peterz: Added changelog. ]
Signed-off-by: Xie Yongji <[email protected]>
Signed-off-by: Zhang Yu <[email protected]>
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Fixes: e38513905eea ("locking/rwsem: Rework zeroing reader waiter->task")
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Ingo Molnar <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
kernel/locking/rwsem-xadd.c | 11 +++++++++--
1 file changed, 9 insertions(+), 2 deletions(-)
diff --git a/kernel/locking/rwsem-xadd.c b/kernel/locking/rwsem-xadd.c
index 09b180063ee1..50d9af615dc4 100644
--- a/kernel/locking/rwsem-xadd.c
+++ b/kernel/locking/rwsem-xadd.c
@@ -198,15 +198,22 @@ static void __rwsem_mark_wake(struct rw_semaphore *sem,
woken++;
tsk = waiter->task;
- wake_q_add(wake_q, tsk);
+ get_task_struct(tsk);
list_del(&waiter->list);
/*
- * Ensure that the last operation is setting the reader
+ * Ensure calling get_task_struct() before setting the reader
* waiter to nil such that rwsem_down_read_failed() cannot
* race with do_exit() by always holding a reference count
* to the task to wakeup.
*/
smp_store_release(&waiter->task, NULL);
+ /*
+ * Ensure issuing the wakeup (either by us or someone else)
+ * after setting the reader waiter to nil.
+ */
+ wake_q_add(wake_q, tsk);
+ /* wake_q_add() already take the task ref */
+ put_task_struct(tsk);
}
adjustment = woken * RWSEM_ACTIVE_READ_BIAS - adjustment;
--
2.19.1
From: Silvio Cesare <[email protected]>
[ Upstream commit e581e151e965bf1f2815dd94620b638fec4d0a7e ]
Change snprintf to scnprintf. There are generally two cases where using
snprintf causes problems.
1) Uses of size += snprintf(buf, SIZE - size, fmt, ...)
In this case, if snprintf would have written more characters than what the
buffer size (SIZE) is, then size will end up larger than SIZE. In later
uses of snprintf, SIZE - size will result in a negative number, leading
to problems. Note that size might already be too large by using
size = snprintf before the code reaches a case of size += snprintf.
2) If size is ultimately used as a length parameter for a copy back to user
space, then it will potentially allow for a buffer overflow and information
disclosure when size is greater than SIZE. When the size is used to index
the buffer directly, we can have memory corruption. This also means when
size = snprintf... is used, it may also cause problems since size may become
large. Copying to userspace is mitigated by the HARDENED_USERCOPY kernel
configuration.
The solution to these issues is to use scnprintf which returns the number of
characters actually written to the buffer, so the size variable will never
exceed SIZE.
Signed-off-by: Silvio Cesare <[email protected]>
Cc: Liam Girdwood <[email protected]>
Cc: Mark Brown <[email protected]>
Cc: Dan Carpenter <[email protected]>
Cc: Kees Cook <[email protected]>
Cc: Will Deacon <[email protected]>
Cc: Greg KH <[email protected]>
Signed-off-by: Willy Tarreau <[email protected]>
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/soc/soc-dapm.c | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/sound/soc/soc-dapm.c b/sound/soc/soc-dapm.c
index a5178845065b..2c4c13419539 100644
--- a/sound/soc/soc-dapm.c
+++ b/sound/soc/soc-dapm.c
@@ -2019,19 +2019,19 @@ static ssize_t dapm_widget_power_read_file(struct file *file,
out = is_connected_output_ep(w, NULL, NULL);
}
- ret = snprintf(buf, PAGE_SIZE, "%s: %s%s in %d out %d",
+ ret = scnprintf(buf, PAGE_SIZE, "%s: %s%s in %d out %d",
w->name, w->power ? "On" : "Off",
w->force ? " (forced)" : "", in, out);
if (w->reg >= 0)
- ret += snprintf(buf + ret, PAGE_SIZE - ret,
+ ret += scnprintf(buf + ret, PAGE_SIZE - ret,
" - R%d(0x%x) mask 0x%x",
w->reg, w->reg, w->mask << w->shift);
- ret += snprintf(buf + ret, PAGE_SIZE - ret, "\n");
+ ret += scnprintf(buf + ret, PAGE_SIZE - ret, "\n");
if (w->sname)
- ret += snprintf(buf + ret, PAGE_SIZE - ret, " stream %s %s\n",
+ ret += scnprintf(buf + ret, PAGE_SIZE - ret, " stream %s %s\n",
w->sname,
w->active ? "active" : "inactive");
@@ -2044,7 +2044,7 @@ static ssize_t dapm_widget_power_read_file(struct file *file,
if (!p->connect)
continue;
- ret += snprintf(buf + ret, PAGE_SIZE - ret,
+ ret += scnprintf(buf + ret, PAGE_SIZE - ret,
" %s \"%s\" \"%s\"\n",
(rdir == SND_SOC_DAPM_DIR_IN) ? "in" : "out",
p->name ? p->name : "static",
--
2.19.1
From: Matthias Reichl <[email protected]>
[ Upstream commit 2833548ecbb385a289124077ab4d812258a867d5 ]
cpu and platform are optional components in DAI links. For example
codec-codec links usually have no platform set.
Call snd_soc_find_component only if the name or of_node of
a cpu or platform is set. Otherwise it will return NULL and
soc_init_dai_link bails out immediately with -EPROBE_DEFER,
meaning registering a card with NULL cpu or platform in DAI links
can never succeed.
Fixes: 8780cf1142a5 ("ASoC: soc-core: defer card probe until all component is added to list")
Signed-off-by: Matthias Reichl <[email protected]>
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/soc/soc-core.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/sound/soc/soc-core.c b/sound/soc/soc-core.c
index e4da6656f65f..0324729001e5 100644
--- a/sound/soc/soc-core.c
+++ b/sound/soc/soc-core.c
@@ -1135,7 +1135,8 @@ static int soc_init_dai_link(struct snd_soc_card *card,
* Defer card registartion if platform dai component is not added to
* component list.
*/
- if (!soc_find_component(link->platform->of_node, link->platform->name))
+ if ((link->platform->of_node || link->platform->name) &&
+ !soc_find_component(link->platform->of_node, link->platform->name))
return -EPROBE_DEFER;
/*
@@ -1154,7 +1155,8 @@ static int soc_init_dai_link(struct snd_soc_card *card,
* Defer card registartion if cpu dai component is not added to
* component list.
*/
- if (!soc_find_component(link->cpu_of_node, link->cpu_name))
+ if ((link->cpu_of_node || link->cpu_name) &&
+ !soc_find_component(link->cpu_of_node, link->cpu_name))
return -EPROBE_DEFER;
/*
--
2.19.1
From: Srinivas Ramana <[email protected]>
[ Upstream commit bddda606ec76550dd63592e32a6e87e7d32583f7 ]
If all CPUs in the irq_default_affinity mask are offline when an interrupt
is initialized then irq_setup_affinity() can set an empty affinity mask for
a newly allocated interrupt.
Fix this by falling back to cpu_online_mask in case the resulting affinity
mask is zero.
Signed-off-by: Srinivas Ramana <[email protected]>
Signed-off-by: Thomas Gleixner <[email protected]>
Cc: [email protected]
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
kernel/irq/manage.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/kernel/irq/manage.c b/kernel/irq/manage.c
index 9dbdccab3b6a..5c0ba5ca5930 100644
--- a/kernel/irq/manage.c
+++ b/kernel/irq/manage.c
@@ -393,6 +393,9 @@ int irq_setup_affinity(struct irq_desc *desc)
}
cpumask_and(&mask, cpu_online_mask, set);
+ if (cpumask_empty(&mask))
+ cpumask_copy(&mask, cpu_online_mask);
+
if (node != NUMA_NO_NODE) {
const struct cpumask *nodemask = cpumask_of_node(node);
--
2.19.1
From: Alexandre Belloni <[email protected]>
[ Upstream commit 7b3027728f4d4f6763f4d7e771acfc9424cdd0e6 ]
Unfortunately, some RTC don't have a second resolution for alarm so also
test for alarm on a minute boundary.
Signed-off-by: Alexandre Belloni <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
tools/testing/selftests/rtc/rtctest.c | 102 ++++++++++++++++++++++++++
1 file changed, 102 insertions(+)
diff --git a/tools/testing/selftests/rtc/rtctest.c b/tools/testing/selftests/rtc/rtctest.c
index dea4e3d6d9e1..b2065536d407 100644
--- a/tools/testing/selftests/rtc/rtctest.c
+++ b/tools/testing/selftests/rtc/rtctest.c
@@ -211,6 +211,108 @@ TEST_F(rtc, alarm_wkalm_set) {
ASSERT_EQ(new, secs);
}
+TEST_F(rtc, alarm_alm_set_minute) {
+ struct timeval tv = { .tv_sec = 62 };
+ unsigned long data;
+ struct rtc_time tm;
+ fd_set readfds;
+ time_t secs, new;
+ int rc;
+
+ rc = ioctl(self->fd, RTC_RD_TIME, &tm);
+ ASSERT_NE(-1, rc);
+
+ secs = timegm((struct tm *)&tm) + 60 - tm.tm_sec;
+ gmtime_r(&secs, (struct tm *)&tm);
+
+ rc = ioctl(self->fd, RTC_ALM_SET, &tm);
+ if (rc == -1) {
+ ASSERT_EQ(EINVAL, errno);
+ TH_LOG("skip alarms are not supported.");
+ return;
+ }
+
+ rc = ioctl(self->fd, RTC_ALM_READ, &tm);
+ ASSERT_NE(-1, rc);
+
+ TH_LOG("Alarm time now set to %02d:%02d:%02d.",
+ tm.tm_hour, tm.tm_min, tm.tm_sec);
+
+ /* Enable alarm interrupts */
+ rc = ioctl(self->fd, RTC_AIE_ON, 0);
+ ASSERT_NE(-1, rc);
+
+ FD_ZERO(&readfds);
+ FD_SET(self->fd, &readfds);
+
+ rc = select(self->fd + 1, &readfds, NULL, NULL, &tv);
+ ASSERT_NE(-1, rc);
+ ASSERT_NE(0, rc);
+
+ /* Disable alarm interrupts */
+ rc = ioctl(self->fd, RTC_AIE_OFF, 0);
+ ASSERT_NE(-1, rc);
+
+ rc = read(self->fd, &data, sizeof(unsigned long));
+ ASSERT_NE(-1, rc);
+ TH_LOG("data: %lx", data);
+
+ rc = ioctl(self->fd, RTC_RD_TIME, &tm);
+ ASSERT_NE(-1, rc);
+
+ new = timegm((struct tm *)&tm);
+ ASSERT_EQ(new, secs);
+}
+
+TEST_F(rtc, alarm_wkalm_set_minute) {
+ struct timeval tv = { .tv_sec = 62 };
+ struct rtc_wkalrm alarm = { 0 };
+ struct rtc_time tm;
+ unsigned long data;
+ fd_set readfds;
+ time_t secs, new;
+ int rc;
+
+ rc = ioctl(self->fd, RTC_RD_TIME, &alarm.time);
+ ASSERT_NE(-1, rc);
+
+ secs = timegm((struct tm *)&alarm.time) + 60 - alarm.time.tm_sec;
+ gmtime_r(&secs, (struct tm *)&alarm.time);
+
+ alarm.enabled = 1;
+
+ rc = ioctl(self->fd, RTC_WKALM_SET, &alarm);
+ if (rc == -1) {
+ ASSERT_EQ(EINVAL, errno);
+ TH_LOG("skip alarms are not supported.");
+ return;
+ }
+
+ rc = ioctl(self->fd, RTC_WKALM_RD, &alarm);
+ ASSERT_NE(-1, rc);
+
+ TH_LOG("Alarm time now set to %02d/%02d/%02d %02d:%02d:%02d.",
+ alarm.time.tm_mday, alarm.time.tm_mon + 1,
+ alarm.time.tm_year + 1900, alarm.time.tm_hour,
+ alarm.time.tm_min, alarm.time.tm_sec);
+
+ FD_ZERO(&readfds);
+ FD_SET(self->fd, &readfds);
+
+ rc = select(self->fd + 1, &readfds, NULL, NULL, &tv);
+ ASSERT_NE(-1, rc);
+ ASSERT_NE(0, rc);
+
+ rc = read(self->fd, &data, sizeof(unsigned long));
+ ASSERT_NE(-1, rc);
+
+ rc = ioctl(self->fd, RTC_RD_TIME, &tm);
+ ASSERT_NE(-1, rc);
+
+ new = timegm((struct tm *)&tm);
+ ASSERT_EQ(new, secs);
+}
+
static void __attribute__((constructor))
__constructor_order_last(void)
{
--
2.19.1
From: Alison Schofield <[email protected]>
[ Upstream commit 91cd63d320f84dcbf21d4327f31f7e1f85adebd0 ]
An expansion field was added to the kernel copy of this structure for
future use. See mm/gup_benchmark.c.
Add the same expansion field here, so that the IOCTL command decodes
correctly. Otherwise, it fails with EINVAL.
Signed-off-by: Alison Schofield <[email protected]>
Acked-by: Kirill A. Shutemov <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
tools/testing/selftests/vm/gup_benchmark.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/tools/testing/selftests/vm/gup_benchmark.c b/tools/testing/selftests/vm/gup_benchmark.c
index 880b96fc80d4..c0534e298b51 100644
--- a/tools/testing/selftests/vm/gup_benchmark.c
+++ b/tools/testing/selftests/vm/gup_benchmark.c
@@ -25,6 +25,7 @@ struct gup_benchmark {
__u64 size;
__u32 nr_pages_per_call;
__u32 flags;
+ __u64 expansion[10]; /* For future use */
};
int main(int argc, char **argv)
--
2.19.1
From: Alban Bedel <[email protected]>
[ Upstream commit 827cb0323928952c0db9515aba9d534fb1285b3f ]
I submitted this driver several times before it got accepted. The
first series hasn't been accepted but the DTS binding did made it.
I then made a second series that added generic reset support to the
PHY core, this in turn required a change to the DT binding. This
second series seemed to have been ignored, so I did a third one
without the change to the PHY core and the DT binding update, and this
last attempt finally made it.
But two months later the DT binding update from the second series has
been integrated too. So now the driver doesn't match the binding and
the only DTS using it. This patch fix the driver to match the new
binding.
Signed-off-by: Alban Bedel <[email protected]>
Signed-off-by: Kishon Vijay Abraham I <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/phy/qualcomm/phy-ath79-usb.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/phy/qualcomm/phy-ath79-usb.c b/drivers/phy/qualcomm/phy-ath79-usb.c
index f7d64f3910b4..09a77e556ece 100644
--- a/drivers/phy/qualcomm/phy-ath79-usb.c
+++ b/drivers/phy/qualcomm/phy-ath79-usb.c
@@ -69,7 +69,7 @@ static int ath79_usb_phy_probe(struct platform_device *pdev)
if (!priv)
return -ENOMEM;
- priv->reset = devm_reset_control_get(&pdev->dev, "usb-phy");
+ priv->reset = devm_reset_control_get(&pdev->dev, "phy");
if (IS_ERR(priv->reset))
return PTR_ERR(priv->reset);
--
2.19.1
From: Eugeniy Paltsev <[email protected]>
[ Upstream commit 4e868f8419cb4cb558c5d428e7ab5629cef864c7 ]
| CC mm/nobootmem.o
|In file included from ./include/asm-generic/bug.h:18:0,
| from ./arch/arc/include/asm/bug.h:32,
| from ./include/linux/bug.h:5,
| from ./include/linux/mmdebug.h:5,
| from ./include/linux/gfp.h:5,
| from ./include/linux/slab.h:15,
| from mm/nobootmem.c:14:
|mm/nobootmem.c: In function '__free_pages_memory':
|./include/linux/kernel.h:845:29: warning: comparison of distinct pointer types lacks a cast
| (!!(sizeof((typeof(x) *)1 == (typeof(y) *)1)))
| ^
|./include/linux/kernel.h:859:4: note: in expansion of macro '__typecheck'
| (__typecheck(x, y) && __no_side_effects(x, y))
| ^~~~~~~~~~~
|./include/linux/kernel.h:869:24: note: in expansion of macro '__safe_cmp'
| __builtin_choose_expr(__safe_cmp(x, y), \
| ^~~~~~~~~~
|./include/linux/kernel.h:878:19: note: in expansion of macro '__careful_cmp'
| #define min(x, y) __careful_cmp(x, y, <)
| ^~~~~~~~~~~~~
|mm/nobootmem.c:104:11: note: in expansion of macro 'min'
| order = min(MAX_ORDER - 1UL, __ffs(start));
Change __ffs return value from 'int' to 'unsigned long' as it
is done in other implementations (like asm-generic, x86, etc...)
to avoid build-time warnings in places where type is strictly
checked.
As __ffs may return values in [0-31] interval changing return
type to unsigned is valid.
Signed-off-by: Eugeniy Paltsev <[email protected]>
Signed-off-by: Vineet Gupta <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arc/include/asm/bitops.h | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/arch/arc/include/asm/bitops.h b/arch/arc/include/asm/bitops.h
index 8da87feec59a..99e6d8948f4a 100644
--- a/arch/arc/include/asm/bitops.h
+++ b/arch/arc/include/asm/bitops.h
@@ -340,7 +340,7 @@ static inline __attribute__ ((const)) int __fls(unsigned long x)
/*
* __ffs: Similar to ffs, but zero based (0-31)
*/
-static inline __attribute__ ((const)) int __ffs(unsigned long word)
+static inline __attribute__ ((const)) unsigned long __ffs(unsigned long word)
{
if (!word)
return word;
@@ -400,9 +400,9 @@ static inline __attribute__ ((const)) int ffs(unsigned long x)
/*
* __ffs: Similar to ffs, but zero based (0-31)
*/
-static inline __attribute__ ((const)) int __ffs(unsigned long x)
+static inline __attribute__ ((const)) unsigned long __ffs(unsigned long x)
{
- int n;
+ unsigned long n;
asm volatile(
" ffs.f %0, %1 \n" /* 0:31; 31(Z) if src 0 */
--
2.19.1
From: Fathi Boudra <[email protected]>
[ Upstream commit 5bbc73a841d7f0bbe025a342146dde462a796a5a ]
seccomp_bpf fails to build due to undefined reference errors:
aarch64-linaro-linux-gcc --sysroot=/build/tmp-rpb-glibc/sysroots/hikey
-O2 -pipe -g -feliminate-unused-debug-types -Wl,-no-as-needed -Wall
-Wl,-O1 -Wl,--hash-style=gnu -Wl,--as-needed -lpthread seccomp_bpf.c -o
/build/tmp-rpb-glibc/work/hikey-linaro-linux/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf
/tmp/ccrlR3MW.o: In function `tsync_sibling':
/usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:1920: undefined reference to `sem_post'
/usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:1920: undefined reference to `sem_post'
/tmp/ccrlR3MW.o: In function `TSYNC_setup':
/usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:1863: undefined reference to `sem_init'
/tmp/ccrlR3MW.o: In function `TSYNC_teardown':
/usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:1904: undefined reference to `sem_destroy'
/usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:1897: undefined reference to `pthread_kill'
/usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:1898: undefined reference to `pthread_cancel'
/usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:1899: undefined reference to `pthread_join'
/tmp/ccrlR3MW.o: In function `tsync_start_sibling':
/usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:1941: undefined reference to `pthread_create'
/usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:1941: undefined reference to `pthread_create'
/tmp/ccrlR3MW.o: In function `TSYNC_siblings_fail_prctl':
/usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:1978: undefined reference to `sem_wait'
/usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:1990: undefined reference to `pthread_join'
/usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:1992: undefined reference to `pthread_join'
/tmp/ccrlR3MW.o: In function `tsync_start_sibling':
/usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:1941: undefined reference to `pthread_create'
/usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:1941: undefined reference to `pthread_create'
/tmp/ccrlR3MW.o: In function `TSYNC_two_siblings_with_ancestor':
/usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:2016: undefined reference to `sem_wait'
/usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:2032: undefined reference to `pthread_join'
/usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:2034: undefined reference to `pthread_join'
/tmp/ccrlR3MW.o: In function `tsync_start_sibling':
/usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:1941: undefined reference to `pthread_create'
/usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:1941: undefined reference to `pthread_create'
/tmp/ccrlR3MW.o: In function `TSYNC_two_sibling_want_nnp':
/usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:2046: undefined reference to `sem_wait'
/usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:2058: undefined reference to `pthread_join'
/usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:2060: undefined reference to `pthread_join'
/tmp/ccrlR3MW.o: In function `tsync_start_sibling':
/usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:1941: undefined reference to `pthread_create'
/usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:1941: undefined reference to `pthread_create'
/tmp/ccrlR3MW.o: In function `TSYNC_two_siblings_with_no_filter':
/usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:2073: undefined reference to `sem_wait'
/usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:2098: undefined reference to `pthread_join'
/usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:2100: undefined reference to `pthread_join'
/tmp/ccrlR3MW.o: In function `tsync_start_sibling':
/usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:1941: undefined reference to `pthread_create'
/usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:1941: undefined reference to `pthread_create'
/tmp/ccrlR3MW.o: In function `TSYNC_two_siblings_with_one_divergence':
/usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:2125: undefined reference to `sem_wait'
/usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:2143: undefined reference to `pthread_join'
/usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:2145: undefined reference to `pthread_join'
/tmp/ccrlR3MW.o: In function `tsync_start_sibling':
/usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:1941: undefined reference to `pthread_create'
/usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:1941: undefined reference to `pthread_create'
/tmp/ccrlR3MW.o: In function `TSYNC_two_siblings_not_under_filter':
/usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:2169: undefined reference to `sem_wait'
/usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:2202: undefined reference to `pthread_join'
/usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:2227: undefined reference to `pthread_join'
/tmp/ccrlR3MW.o: In function `tsync_start_sibling':
/usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:1941: undefined reference to `pthread_create'
It's GNU Make and linker specific.
The default Makefile rule looks like:
$(CC) $(CFLAGS) $(LDFLAGS) $@ $^ $(LDLIBS)
When linking is done by gcc itself, no issue, but when it needs to be passed
to proper ld, only LDLIBS follows and then ld cannot know what libs to link
with.
More detail:
https://www.gnu.org/software/make/manual/html_node/Implicit-Variables.html
LDFLAGS
Extra flags to give to compilers when they are supposed to invoke the linker,
‘ld’, such as -L. Libraries (-lfoo) should be added to the LDLIBS variable
instead.
LDLIBS
Library flags or names given to compilers when they are supposed to invoke the
linker, ‘ld’. LOADLIBES is a deprecated (but still supported) alternative to
LDLIBS. Non-library linker flags, such as -L, should go in the LDFLAGS
variable.
https://lkml.org/lkml/2010/2/10/362
tools/perf: libraries must come after objects
Link order matters, use LDLIBS instead of LDFLAGS to properly link against
libpthread.
Signed-off-by: Fathi Boudra <[email protected]>
Acked-by: Kees Cook <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
tools/testing/selftests/seccomp/Makefile | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/tools/testing/selftests/seccomp/Makefile b/tools/testing/selftests/seccomp/Makefile
index fce7f4ce0692..1760b3e39730 100644
--- a/tools/testing/selftests/seccomp/Makefile
+++ b/tools/testing/selftests/seccomp/Makefile
@@ -9,7 +9,7 @@ BINARIES := seccomp_bpf seccomp_benchmark
CFLAGS += -Wl,-no-as-needed -Wall
seccomp_bpf: seccomp_bpf.c ../kselftest_harness.h
- $(CC) $(CFLAGS) $(LDFLAGS) -lpthread $< -o $@
+ $(CC) $(CFLAGS) $(LDFLAGS) $< -lpthread -o $@
TEST_PROGS += $(BINARIES)
EXTRA_CLEAN := $(BINARIES)
--
2.19.1
From: Curtis Malainey <[email protected]>
[ Upstream commit 09ac6a817bd687e7f5dac00470262efdd72f9319 ]
snd_soc_init_platform initializes pointers to snd_soc_dai_link which is
statically allocated and it does this by devm_kzalloc. In the event of
an EPROBE_DEFER the memory will be freed and the pointers are left
dangling. snd_soc_init_platform sees the dangling pointers and assumes
they are pointing to initialized memory and does not reallocate them on
the second probe attempt which results in a use after free bug since
devm has freed the memory from the first probe attempt.
Since the intention for snd_soc_dai_link->platform is that it can be set
statically by the machine driver we need to respect the pointer in the
event we did not set it but still catch dangling pointers. The solution
is to add a flag to track whether the pointer was dynamically allocated
or not.
Signed-off-by: Curtis Malainey <[email protected]>
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
include/sound/soc.h | 6 ++++++
sound/soc/soc-core.c | 11 ++++++-----
2 files changed, 12 insertions(+), 5 deletions(-)
diff --git a/include/sound/soc.h b/include/sound/soc.h
index 3e0ac310a3df..e721082c84a3 100644
--- a/include/sound/soc.h
+++ b/include/sound/soc.h
@@ -985,6 +985,12 @@ struct snd_soc_dai_link {
/* Do not create a PCM for this DAI link (Backend link) */
unsigned int ignore:1;
+ /*
+ * This driver uses legacy platform naming. Set by the core, machine
+ * drivers should not modify this value.
+ */
+ unsigned int legacy_platform:1;
+
struct list_head list; /* DAI link list of the soc card */
struct snd_soc_dobj dobj; /* For topology */
};
diff --git a/sound/soc/soc-core.c b/sound/soc/soc-core.c
index 0b91d8fc6ca2..17632da21ba7 100644
--- a/sound/soc/soc-core.c
+++ b/sound/soc/soc-core.c
@@ -1034,17 +1034,18 @@ static int snd_soc_init_platform(struct snd_soc_card *card,
* this function should be removed in the future
*/
/* convert Legacy platform link */
- if (!platform) {
+ if (!platform || dai_link->legacy_platform) {
platform = devm_kzalloc(card->dev,
sizeof(struct snd_soc_dai_link_component),
GFP_KERNEL);
if (!platform)
return -ENOMEM;
- dai_link->platform = platform;
- platform->name = dai_link->platform_name;
- platform->of_node = dai_link->platform_of_node;
- platform->dai_name = NULL;
+ dai_link->platform = platform;
+ dai_link->legacy_platform = 1;
+ platform->name = dai_link->platform_name;
+ platform->of_node = dai_link->platform_of_node;
+ platform->dai_name = NULL;
}
/* if there's no platform we match on the empty platform */
--
2.19.1
From: Dan Carpenter <[email protected]>
[ Upstream commit d39eca547f3ec67140a5d765a426eb157b978a59 ]
If tegra_dfll_unregister() fails then "soc" is an error pointer. We
should just return instead of dereferencing it.
Fixes: 1752c9ee23fb ("clk: tegra: dfll: Fix drvdata overwriting issue")
Signed-off-by: Dan Carpenter <[email protected]>
Signed-off-by: Stephen Boyd <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/clk/tegra/clk-tegra124-dfll-fcpu.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/clk/tegra/clk-tegra124-dfll-fcpu.c b/drivers/clk/tegra/clk-tegra124-dfll-fcpu.c
index 269d3595758b..edc31bb56674 100644
--- a/drivers/clk/tegra/clk-tegra124-dfll-fcpu.c
+++ b/drivers/clk/tegra/clk-tegra124-dfll-fcpu.c
@@ -133,9 +133,11 @@ static int tegra124_dfll_fcpu_remove(struct platform_device *pdev)
struct tegra_dfll_soc_data *soc;
soc = tegra_dfll_unregister(pdev);
- if (IS_ERR(soc))
+ if (IS_ERR(soc)) {
dev_err(&pdev->dev, "failed to unregister DFLL: %ld\n",
PTR_ERR(soc));
+ return PTR_ERR(soc);
+ }
tegra_cvb_remove_opp_table(soc->dev, soc->cvb, soc->max_freq);
--
2.19.1
From: Shuming Fan <[email protected]>
[ Upstream commit ee7ea2a9a318a89d21b156dc75e54d53904bdbe5 ]
Fix typo which causes headphone no sound while using BCLK
as PLL source.
Signed-off-by: Shuming Fan <[email protected]>
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/soc/codecs/rt5682.h | 24 ++++++++++++------------
1 file changed, 12 insertions(+), 12 deletions(-)
diff --git a/sound/soc/codecs/rt5682.h b/sound/soc/codecs/rt5682.h
index d82a8301fd74..96944cff0ed7 100644
--- a/sound/soc/codecs/rt5682.h
+++ b/sound/soc/codecs/rt5682.h
@@ -849,18 +849,18 @@
#define RT5682_SCLK_SRC_PLL2 (0x2 << 13)
#define RT5682_SCLK_SRC_SDW (0x3 << 13)
#define RT5682_SCLK_SRC_RCCLK (0x4 << 13)
-#define RT5682_PLL1_SRC_MASK (0x3 << 10)
-#define RT5682_PLL1_SRC_SFT 10
-#define RT5682_PLL1_SRC_MCLK (0x0 << 10)
-#define RT5682_PLL1_SRC_BCLK1 (0x1 << 10)
-#define RT5682_PLL1_SRC_SDW (0x2 << 10)
-#define RT5682_PLL1_SRC_RC (0x3 << 10)
-#define RT5682_PLL2_SRC_MASK (0x3 << 8)
-#define RT5682_PLL2_SRC_SFT 8
-#define RT5682_PLL2_SRC_MCLK (0x0 << 8)
-#define RT5682_PLL2_SRC_BCLK1 (0x1 << 8)
-#define RT5682_PLL2_SRC_SDW (0x2 << 8)
-#define RT5682_PLL2_SRC_RC (0x3 << 8)
+#define RT5682_PLL2_SRC_MASK (0x3 << 10)
+#define RT5682_PLL2_SRC_SFT 10
+#define RT5682_PLL2_SRC_MCLK (0x0 << 10)
+#define RT5682_PLL2_SRC_BCLK1 (0x1 << 10)
+#define RT5682_PLL2_SRC_SDW (0x2 << 10)
+#define RT5682_PLL2_SRC_RC (0x3 << 10)
+#define RT5682_PLL1_SRC_MASK (0x3 << 8)
+#define RT5682_PLL1_SRC_SFT 8
+#define RT5682_PLL1_SRC_MCLK (0x0 << 8)
+#define RT5682_PLL1_SRC_BCLK1 (0x1 << 8)
+#define RT5682_PLL1_SRC_SDW (0x2 << 8)
+#define RT5682_PLL1_SRC_RC (0x3 << 8)
--
2.19.1
From: Kai-Heng Feng <[email protected]>
[ Upstream commit 77ae0d8e401f083ca69c202502da4fc0e38cb1b7 ]
A Goodix touchpad doesn't work. Touching the touchpad can trigger IRQ
but there's no input event from HID subsystem.
Turns out it reports some invalid data:
[ 22.136630] i2c_hid i2c-DELL091F:00: input: 0b 00 01 00 00 00 00 00 00 00 00
After some trial and error, it's another device that doesn't work well
with ON/SLEEP commands. Disable runtime PM to fix the issue.
Signed-off-by: Kai-Heng Feng <[email protected]>
Signed-off-by: Jiri Kosina <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/hid/hid-ids.h | 3 +++
drivers/hid/i2c-hid/i2c-hid-core.c | 2 ++
2 files changed, 5 insertions(+)
diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h
index 27519eb8ee63..81bc2f6b93a3 100644
--- a/drivers/hid/hid-ids.h
+++ b/drivers/hid/hid-ids.h
@@ -459,6 +459,9 @@
#define USB_DEVICE_ID_GENERAL_TOUCH_WIN8_PIT_010A 0x010a
#define USB_DEVICE_ID_GENERAL_TOUCH_WIN8_PIT_E100 0xe100
+#define I2C_VENDOR_ID_GOODIX 0x27c6
+#define I2C_DEVICE_ID_GOODIX_01F0 0x01f0
+
#define USB_VENDOR_ID_GOODTOUCH 0x1aad
#define USB_DEVICE_ID_GOODTOUCH_000f 0x000f
diff --git a/drivers/hid/i2c-hid/i2c-hid-core.c b/drivers/hid/i2c-hid/i2c-hid-core.c
index 8555ce7e737b..c5edfa966343 100644
--- a/drivers/hid/i2c-hid/i2c-hid-core.c
+++ b/drivers/hid/i2c-hid/i2c-hid-core.c
@@ -179,6 +179,8 @@ static const struct i2c_hid_quirks {
I2C_HID_QUIRK_DELAY_AFTER_SLEEP },
{ USB_VENDOR_ID_LG, I2C_DEVICE_ID_LG_8001,
I2C_HID_QUIRK_NO_RUNTIME_PM },
+ { I2C_VENDOR_ID_GOODIX, I2C_DEVICE_ID_GOODIX_01F0,
+ I2C_HID_QUIRK_NO_RUNTIME_PM },
{ 0, 0 }
};
--
2.19.1
From: Lubomir Rintel <[email protected]>
[ Upstream commit c6e909972ef87aa2a479269f46b84126f99ec6db ]
Add a missing comma so that the output is valid JSON format again.
Fixes: 9fba738a53dd ("clk: add duty cycle support")
Signed-off-by: Lubomir Rintel <[email protected]>
Signed-off-by: Stephen Boyd <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/clk/clk.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c
index af011974d4ec..2bcd9cb26348 100644
--- a/drivers/clk/clk.c
+++ b/drivers/clk/clk.c
@@ -2782,7 +2782,7 @@ static void clk_dump_one(struct seq_file *s, struct clk_core *c, int level)
seq_printf(s, "\"protect_count\": %d,", c->protect_count);
seq_printf(s, "\"rate\": %lu,", clk_core_get_rate(c));
seq_printf(s, "\"accuracy\": %lu,", clk_core_get_accuracy(c));
- seq_printf(s, "\"phase\": %d", clk_core_get_phase(c));
+ seq_printf(s, "\"phase\": %d,", clk_core_get_phase(c));
seq_printf(s, "\"duty_cycle\": %u",
clk_core_get_scaled_duty_cycle(c, 100000));
}
--
2.19.1
From: Mark Brown <[email protected]>
[ Upstream commit 5a7b2aabc1aa0393f067d9325ada96fdf67f8cb7 ]
There are some use cases where you're checking for a lot of things on a
card and it makes sense that you might end up trying to call
snd_soc_find_component() without either a name or an of_node. Currently
in that case we try to dereference the name and crash but it's more
useful to allow the caller to just treat that as a case where we don't
find anything, that error handling will already exist.
Inspired by a patch from Ajit Pandey fixing some callers.
Fixes: 8780cf1142a5 ("ASoC: soc-core: defer card probe until all component is added to list")
Reported-by: Pierre-Louis Bossart <[email protected]>
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/soc/soc-core.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/sound/soc/soc-core.c b/sound/soc/soc-core.c
index 17632da21ba7..e4da6656f65f 100644
--- a/sound/soc/soc-core.c
+++ b/sound/soc/soc-core.c
@@ -742,7 +742,7 @@ static struct snd_soc_component *soc_find_component(
if (of_node) {
if (component->dev->of_node == of_node)
return component;
- } else if (strcmp(component->name, name) == 0) {
+ } else if (name && strcmp(component->name, name) == 0) {
return component;
}
}
--
2.19.1
From: Dan Carpenter <[email protected]>
[ Upstream commit 678e2b44c8e3fec3afc7202f1996a4500a50be93 ]
The problem is seen in the q6asm_dai_compr_set_params() function:
ret = q6asm_map_memory_regions(dir, prtd->audio_client, prtd->phys,
(prtd->pcm_size / prtd->periods),
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
prtd->periods);
In this code prtd->pcm_size is the buffer_size and prtd->periods comes
from params->buffer.fragments. If we allow the number of fragments to
be zero then it results in a divide by zero bug. One possible fix would
be to use prtd->pcm_count directly instead of using the division to
re-calculate it. But I decided that it doesn't really make sense to
allow zero fragments.
Signed-off-by: Dan Carpenter <[email protected]>
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/core/compress_offload.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/sound/core/compress_offload.c b/sound/core/compress_offload.c
index 26b5e245b074..8b78ddffa509 100644
--- a/sound/core/compress_offload.c
+++ b/sound/core/compress_offload.c
@@ -529,7 +529,8 @@ static int snd_compress_check_input(struct snd_compr_params *params)
{
/* first let's check the buffer parameter's */
if (params->buffer.fragment_size == 0 ||
- params->buffer.fragments > INT_MAX / params->buffer.fragment_size)
+ params->buffer.fragments > INT_MAX / params->buffer.fragment_size ||
+ params->buffer.fragments == 0)
return -EINVAL;
/* now codec parameters */
--
2.19.1
From: Dan Carpenter <[email protected]>
[ Upstream commit 3fe931b31a4078395c1967f0495dcc9e5ec6b5e3 ]
The intel_soc_dts_iosf_init() function doesn't return NULL, it returns
error pointers.
Fixes: 4d0dd6c1576b ("Thermal/int340x/processor_thermal: Enable auxiliary DTS for Braswell")
Signed-off-by: Dan Carpenter <[email protected]>
Signed-off-by: Zhang Rui <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/thermal/int340x_thermal/processor_thermal_device.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/thermal/int340x_thermal/processor_thermal_device.c b/drivers/thermal/int340x_thermal/processor_thermal_device.c
index 284cf2c5a8fd..8e0f665cf06f 100644
--- a/drivers/thermal/int340x_thermal/processor_thermal_device.c
+++ b/drivers/thermal/int340x_thermal/processor_thermal_device.c
@@ -423,7 +423,7 @@ static int proc_thermal_pci_probe(struct pci_dev *pdev,
proc_priv->soc_dts = intel_soc_dts_iosf_init(
INTEL_SOC_DTS_INTERRUPT_MSI, 2, 0);
- if (proc_priv->soc_dts && pdev->irq) {
+ if (!IS_ERR(proc_priv->soc_dts) && pdev->irq) {
ret = pci_enable_msi(pdev);
if (!ret) {
ret = request_threaded_irq(pdev->irq, NULL,
--
2.19.1
From: Rander Wang <[email protected]>
[ Upstream commit 906a9abc5de73c383af518f5a806f4be2993a0c7 ]
For some reason this field was set to zero when all other drivers use
.dynamic = 1 for front-ends. This change was tested on Dell XPS13 and
has no impact with the existing legacy driver. The SOF driver also works
with this change which enables it to override the fixed topology.
Signed-off-by: Rander Wang <[email protected]>
Acked-by: Pierre-Louis Bossart <[email protected]>
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/soc/intel/boards/broadwell.c | 2 +-
sound/soc/intel/boards/haswell.c | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/sound/soc/intel/boards/broadwell.c b/sound/soc/intel/boards/broadwell.c
index 68e6543e6cb0..99f2a0156ae8 100644
--- a/sound/soc/intel/boards/broadwell.c
+++ b/sound/soc/intel/boards/broadwell.c
@@ -192,7 +192,7 @@ static struct snd_soc_dai_link broadwell_rt286_dais[] = {
.stream_name = "Loopback",
.cpu_dai_name = "Loopback Pin",
.platform_name = "haswell-pcm-audio",
- .dynamic = 0,
+ .dynamic = 1,
.codec_name = "snd-soc-dummy",
.codec_dai_name = "snd-soc-dummy-dai",
.trigger = {SND_SOC_DPCM_TRIGGER_POST, SND_SOC_DPCM_TRIGGER_POST},
diff --git a/sound/soc/intel/boards/haswell.c b/sound/soc/intel/boards/haswell.c
index eab1f439dd3f..a4022983a7ce 100644
--- a/sound/soc/intel/boards/haswell.c
+++ b/sound/soc/intel/boards/haswell.c
@@ -146,7 +146,7 @@ static struct snd_soc_dai_link haswell_rt5640_dais[] = {
.stream_name = "Loopback",
.cpu_dai_name = "Loopback Pin",
.platform_name = "haswell-pcm-audio",
- .dynamic = 0,
+ .dynamic = 1,
.codec_name = "snd-soc-dummy",
.codec_dai_name = "snd-soc-dummy-dai",
.trigger = {SND_SOC_DPCM_TRIGGER_POST, SND_SOC_DPCM_TRIGGER_POST},
--
2.19.1
From: Rohit kumar <[email protected]>
[ Upstream commit 04eb1efcd614d6f067b76a355b3a3599667959dc ]
soc_init_dai_link() calls soc_find_component() which needs
to be within client_mutex lock. Add client_mutex lock around
soc_init_dai_link() in snd_soc_register_card() to avoid
lockdep warning.
Fixes: 8780cf1142a5 ("ASoC: soc-core: defer card probe until all component is added to list")
Reported-by: Kuninori Morimoto <[email protected]>
Signed-off-by: Rohit kumar <[email protected]>
Signed-off-by: Ajit Pandey <[email protected]>
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/soc/soc-core.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/sound/soc/soc-core.c b/sound/soc/soc-core.c
index 74b12f90ea9b..0b91d8fc6ca2 100644
--- a/sound/soc/soc-core.c
+++ b/sound/soc/soc-core.c
@@ -1027,6 +1027,7 @@ static int snd_soc_init_platform(struct snd_soc_card *card,
struct snd_soc_dai_link *dai_link)
{
struct snd_soc_dai_link_component *platform = dai_link->platform;
+
/*
* FIXME
*
@@ -2754,15 +2755,18 @@ int snd_soc_register_card(struct snd_soc_card *card)
if (!card->name || !card->dev)
return -EINVAL;
+ mutex_lock(&client_mutex);
for_each_card_prelinks(card, i, link) {
ret = soc_init_dai_link(card, link);
if (ret) {
dev_err(card->dev, "ASoC: failed to init link %s\n",
link->name);
+ mutex_unlock(&client_mutex);
return ret;
}
}
+ mutex_unlock(&client_mutex);
dev_set_drvdata(card->dev, card);
--
2.19.1
From: Ajit Pandey <[email protected]>
[ Upstream commit 8780cf1142a59568a3aa77959cbd76b2edb6fd81 ]
DAI component probe is not called if it is not present
in component list during sound card registration.
Check if component is available in component list for
platform and cpu dai before soundcard registration.
Signed-off-by: Ajit Pandey <[email protected]>
Signed-off-by: Rohit kumar <[email protected]>
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/soc/soc-core.c | 17 ++++++++++++++++-
1 file changed, 16 insertions(+), 1 deletion(-)
diff --git a/sound/soc/soc-core.c b/sound/soc/soc-core.c
index b29d0f65611e..74b12f90ea9b 100644
--- a/sound/soc/soc-core.c
+++ b/sound/soc/soc-core.c
@@ -1027,7 +1027,6 @@ static int snd_soc_init_platform(struct snd_soc_card *card,
struct snd_soc_dai_link *dai_link)
{
struct snd_soc_dai_link_component *platform = dai_link->platform;
-
/*
* FIXME
*
@@ -1129,6 +1128,14 @@ static int soc_init_dai_link(struct snd_soc_card *card,
link->name);
return -EINVAL;
}
+
+ /*
+ * Defer card registartion if platform dai component is not added to
+ * component list.
+ */
+ if (!soc_find_component(link->platform->of_node, link->platform->name))
+ return -EPROBE_DEFER;
+
/*
* CPU device may be specified by either name or OF node, but
* can be left unspecified, and will be matched based on DAI
@@ -1140,6 +1147,14 @@ static int soc_init_dai_link(struct snd_soc_card *card,
link->name);
return -EINVAL;
}
+
+ /*
+ * Defer card registartion if cpu dai component is not added to
+ * component list.
+ */
+ if (!soc_find_component(link->cpu_of_node, link->cpu_name))
+ return -EPROBE_DEFER;
+
/*
* At least one of CPU DAI name or CPU device name/node must be
* specified
--
2.19.1
From: Yizhuo <[email protected]>
[ Upstream commit 8c3590de0a378c2449fc1aec127cc693632458e4 ]
Inside function rt274_i2c_probe(), if regmap_read() function
returns -EINVAL, then local variable "val" leaves uninitialized
but used in if statement. This is potentially unsafe.
Signed-off-by: Yizhuo <[email protected]>
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/soc/codecs/rt274.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/sound/soc/codecs/rt274.c b/sound/soc/codecs/rt274.c
index 0ef966d56bac..e2855ab9a2c6 100644
--- a/sound/soc/codecs/rt274.c
+++ b/sound/soc/codecs/rt274.c
@@ -1128,8 +1128,11 @@ static int rt274_i2c_probe(struct i2c_client *i2c,
return ret;
}
- regmap_read(rt274->regmap,
+ ret = regmap_read(rt274->regmap,
RT274_GET_PARAM(AC_NODE_ROOT, AC_PAR_VENDOR_ID), &val);
+ if (ret)
+ return ret;
+
if (val != RT274_VENDOR_ID) {
dev_err(&i2c->dev,
"Device with ID register %#x is not rt274\n", val);
--
2.19.1
On Thu, Feb 14 2019 at 9:08pm -0500,
Sasha Levin <[email protected]> wrote:
> From: Mike Snitzer <[email protected]>
>
> [ Upstream commit 57c36519e4b949f89381053f7283f5d605595b42 ]
>
> DM's clone_bio() now benefits from using bio_trim() by fixing the fact
> that clone_bio() wasn't clearing BIO_SEG_VALID like bio_trim() does;
> which triggers blk_recount_segments() via bio_phys_segments().
>
> Reviewed-by: Ming Lei <[email protected]>
> Signed-off-by: Mike Snitzer <[email protected]>
> Signed-off-by: Sasha Levin <[email protected]>
Please no, I later effectively reverted this change with commit
fa8db4948f522 ("dm: don't use bio_trim() afterall")
(As and aside, I really shouldn't have to defend against stable@ bots
picking up a commit, like 57c36519e4b949f, that wasn't marked for
stable@.)
On Thu, Feb 14, 2019 at 09:07:44PM -0500, Sasha Levin wrote:
> From: Ajit Pandey <[email protected]>
>
> [ Upstream commit 8780cf1142a59568a3aa77959cbd76b2edb6fd81 ]
>
> DAI component probe is not called if it is not present
> in component list during sound card registration.
> Check if component is available in component list for
> platform and cpu dai before soundcard registration.
This is a really bad idea without also looking at surrounding commits -
taken randomly by itself it's more likely to introduce regressions than
help.
On Thu, Feb 14, 2019 at 09:07:48PM -0500, Sasha Levin wrote:
> Fixes: 8780cf1142a5 ("ASoC: soc-core: defer card probe until all component is added to list")
> Reported-by: Kuninori Morimoto <[email protected]>
I just suggested not backporting the above fix for which this is an
incremental fix.
On Thu, Feb 14, 2019 at 09:07:54PM -0500, Sasha Levin wrote:
> From: Curtis Malainey <[email protected]>
>
> [ Upstream commit 09ac6a817bd687e7f5dac00470262efdd72f9319 ]
>
> snd_soc_init_platform initializes pointers to snd_soc_dai_link which is
> statically allocated and it does this by devm_kzalloc. In the event of
> an EPROBE_DEFER the memory will be freed and the pointers are left
This is also part of the same set of issues.
??, 14 ????. 2019 ?. ? 18:40, Sasha Levin <[email protected]>:
>
> From: Pavel Shilovsky <[email protected]>
>
> [ Upstream commit 0fd1d37b0501efc6e295f56ab55cdaff784aa50c ]
>
> If we don't receive a response we can't assume that the server
> granted one credit. Assume zero credits in such cases.
>
> Signed-off-by: Pavel Shilovsky <[email protected]>
> Reviewed-by: Ronnie Sahlberg <[email protected]>
> Signed-off-by: Steve French <[email protected]>
> Signed-off-by: Sasha Levin <[email protected]>
> ---
> fs/cifs/smb2pdu.c | 15 +++++++++++----
> 1 file changed, 11 insertions(+), 4 deletions(-)
>
> diff --git a/fs/cifs/smb2pdu.c b/fs/cifs/smb2pdu.c
> index d1ae7cdb236d..3c44c51310c4 100644
> --- a/fs/cifs/smb2pdu.c
> +++ b/fs/cifs/smb2pdu.c
> @@ -2834,9 +2834,10 @@ smb2_echo_callback(struct mid_q_entry *mid)
> {
> struct TCP_Server_Info *server = mid->callback_data;
> struct smb2_echo_rsp *rsp = (struct smb2_echo_rsp *)mid->resp_buf;
> - unsigned int credits_received = 1;
> + unsigned int credits_received = 0;
>
> - if (mid->mid_state == MID_RESPONSE_RECEIVED)
> + if (mid->mid_state == MID_RESPONSE_RECEIVED
> + || mid->mid_state == MID_RESPONSE_MALFORMED)
> credits_received = le16_to_cpu(rsp->sync_hdr.CreditRequest);
>
> DeleteMidQEntry(mid);
> @@ -3093,7 +3094,7 @@ smb2_readv_callback(struct mid_q_entry *mid)
> struct TCP_Server_Info *server = tcon->ses->server;
> struct smb2_sync_hdr *shdr =
> (struct smb2_sync_hdr *)rdata->iov[0].iov_base;
> - unsigned int credits_received = 1;
> + unsigned int credits_received = 0;
> struct smb_rqst rqst = { .rq_iov = rdata->iov,
> .rq_nvec = 2,
> .rq_pages = rdata->pages,
> @@ -3132,6 +3133,9 @@ smb2_readv_callback(struct mid_q_entry *mid)
> task_io_account_read(rdata->got_bytes);
> cifs_stats_bytes_read(tcon, rdata->got_bytes);
> break;
> + case MID_RESPONSE_MALFORMED:
> + credits_received = le16_to_cpu(shdr->CreditRequest);
> + /* fall through */
> default:
> if (rdata->result != -ENODATA)
> rdata->result = -EIO;
> @@ -3325,7 +3329,7 @@ smb2_writev_callback(struct mid_q_entry *mid)
> struct cifs_tcon *tcon = tlink_tcon(wdata->cfile->tlink);
> unsigned int written;
> struct smb2_write_rsp *rsp = (struct smb2_write_rsp *)mid->resp_buf;
> - unsigned int credits_received = 1;
> + unsigned int credits_received = 0;
>
> switch (mid->mid_state) {
> case MID_RESPONSE_RECEIVED:
> @@ -3353,6 +3357,9 @@ smb2_writev_callback(struct mid_q_entry *mid)
> case MID_RETRY_NEEDED:
> wdata->result = -EAGAIN;
> break;
> + case MID_RESPONSE_MALFORMED:
> + credits_received = le16_to_cpu(rsp->sync_hdr.CreditRequest);
> + /* fall through */
> default:
> wdata->result = -EIO;
> break;
> --
> 2.19.1
>
Can you also apply the following patch to 4.20.y and 4.19.y, please?
https://patchwork.ozlabs.org/patch/1030180/
Best regards,
Pavel Shilovsky
On Fri, Feb 15, 2019 at 11:57:12AM +0000, Mark Brown wrote:
>On Thu, Feb 14, 2019 at 09:07:44PM -0500, Sasha Levin wrote:
>> From: Ajit Pandey <[email protected]>
>>
>> [ Upstream commit 8780cf1142a59568a3aa77959cbd76b2edb6fd81 ]
>>
>> DAI component probe is not called if it is not present
>> in component list during sound card registration.
>> Check if component is available in component list for
>> platform and cpu dai before soundcard registration.
>
>This is a really bad idea without also looking at surrounding commits -
>taken randomly by itself it's more likely to introduce regressions than
>help.
I've dropped it, thank you.
--
Thanks,
Sasha
On Fri, Feb 15, 2019 at 11:57:56AM +0000, Mark Brown wrote:
>On Thu, Feb 14, 2019 at 09:07:48PM -0500, Sasha Levin wrote:
>
>> Fixes: 8780cf1142a5 ("ASoC: soc-core: defer card probe until all component is added to list")
>> Reported-by: Kuninori Morimoto <[email protected]>
>
>I just suggested not backporting the above fix for which this is an
>incremental fix.
Dropped as well, thanks.
--
Thanks,
Sasha
On Fri, Feb 15, 2019 at 11:58:18AM +0000, Mark Brown wrote:
>On Thu, Feb 14, 2019 at 09:07:54PM -0500, Sasha Levin wrote:
>> From: Curtis Malainey <[email protected]>
>>
>> [ Upstream commit 09ac6a817bd687e7f5dac00470262efdd72f9319 ]
>>
>> snd_soc_init_platform initializes pointers to snd_soc_dai_link which is
>> statically allocated and it does this by devm_kzalloc. In the event of
>> an EPROBE_DEFER the memory will be freed and the pointers are left
>
>This is also part of the same set of issues.
Dropped as well.
--
Thanks,
Sasha
On Thu, Feb 14, 2019 at 10:49:09PM -0500, Mike Snitzer wrote:
>On Thu, Feb 14 2019 at 9:08pm -0500,
>Sasha Levin <[email protected]> wrote:
>
>> From: Mike Snitzer <[email protected]>
>>
>> [ Upstream commit 57c36519e4b949f89381053f7283f5d605595b42 ]
>>
>> DM's clone_bio() now benefits from using bio_trim() by fixing the fact
>> that clone_bio() wasn't clearing BIO_SEG_VALID like bio_trim() does;
>> which triggers blk_recount_segments() via bio_phys_segments().
>>
>> Reviewed-by: Ming Lei <[email protected]>
>> Signed-off-by: Mike Snitzer <[email protected]>
>> Signed-off-by: Sasha Levin <[email protected]>
>
>Please no, I later effectively reverted this change with commit
>fa8db4948f522 ("dm: don't use bio_trim() afterall")
I've dropped it, thank you.
>(As and aside, I really shouldn't have to defend against stable@ bots
>picking up a commit, like 57c36519e4b949f, that wasn't marked for
>stable@.)
Is it the case that this commit isn't appropriate for stable for some
reason, or was it just buggy?
--
Thanks,
Sasha
On Fri, Feb 15, 2019 at 10:28:08AM +0800, Ming Lei wrote:
>On Thu, Feb 14, 2019 at 09:08:27PM -0500, Sasha Levin wrote:
>> From: Ming Lei <[email protected]>
>>
>> [ Upstream commit 698cef173983b086977e633e46476e0f925ca01e ]
>>
>> Except for blk_queue_split(), bio_split() is used for splitting bio too,
>> then the remained bio is often resubmit to queue via generic_make_request().
>> So the same queue enter recursion exits in this case too. Unfortunatley
>> commit cd4a4ae4683dc2 doesn't help this case.
>>
>> This patch covers the above case by setting BIO_QUEUE_ENTERED before calling
>> q->make_request_fn.
>>
>> In theory the per-bio flag is used to simulate one stack variable, it is
>> just fine to clear it after q->make_request_fn is returned. Especially
>> the same bio can't be submitted from another context.
>>
>> Fixes: cd4a4ae4683dc2 ("block: don't use blocking queue entered for recursive bio submits")
>> Cc: Tetsuo Handa <[email protected]>
>> Cc: NeilBrown <[email protected]>
>> Reviewed-by: Mike Snitzer <[email protected]>
>> Signed-off-by: Ming Lei <[email protected]>
>> Signed-off-by: Jens Axboe <[email protected]>
>> Signed-off-by: Sasha Levin <[email protected]>
>> ---
>> block/blk-core.c | 11 +++++++++++
>> block/blk-merge.c | 10 ----------
>> 2 files changed, 11 insertions(+), 10 deletions(-)
>>
>> diff --git a/block/blk-core.c b/block/blk-core.c
>> index deb56932f8c4..22260339f66f 100644
>> --- a/block/blk-core.c
>> +++ b/block/blk-core.c
>> @@ -2449,7 +2449,18 @@ blk_qc_t generic_make_request(struct bio *bio)
>> /* Create a fresh bio_list for all subordinate requests */
>> bio_list_on_stack[1] = bio_list_on_stack[0];
>> bio_list_init(&bio_list_on_stack[0]);
>> +
>> + /*
>> + * Since we're recursing into make_request here, ensure
>> + * that we mark this bio as already having entered the queue.
>> + * If not, and the queue is going away, we can get stuck
>> + * forever on waiting for the queue reference to drop. But
>> + * that will never happen, as we're already holding a
>> + * reference to it.
>> + */
>> + bio_set_flag(bio, BIO_QUEUE_ENTERED);
>> ret = q->make_request_fn(q, bio);
>> + bio_clear_flag(bio, BIO_QUEUE_ENTERED);
>>
>> /* sort new bios into those for a lower level
>> * and those for the same level
>> diff --git a/block/blk-merge.c b/block/blk-merge.c
>> index 7695034f4b87..adfe835ab258 100644
>> --- a/block/blk-merge.c
>> +++ b/block/blk-merge.c
>> @@ -272,16 +272,6 @@ void blk_queue_split(struct request_queue *q, struct bio **bio)
>> /* there isn't chance to merge the splitted bio */
>> split->bi_opf |= REQ_NOMERGE;
>>
>> - /*
>> - * Since we're recursing into make_request here, ensure
>> - * that we mark this bio as already having entered the queue.
>> - * If not, and the queue is going away, we can get stuck
>> - * forever on waiting for the queue reference to drop. But
>> - * that will never happen, as we're already holding a
>> - * reference to it.
>> - */
>> - bio_set_flag(*bio, BIO_QUEUE_ENTERED);
>> -
>> bio_chain(split, *bio);
>> trace_block_split(q, split, (*bio)->bi_iter.bi_sector);
>> generic_make_request(*bio);
>> --
>> 2.19.1
>>
>
>This one should be dropped, given it has been reverted.
Dropped, thank you.
--
Thanks,
Sasha
On Fri, Feb 15, 2019 at 08:10:47PM +0000, Pavel Shilovskiy wrote:
>чт, 14 февр. 2019 г. в 18:40, Sasha Levin <[email protected]>:
>>
>> From: Pavel Shilovsky <[email protected]>
>>
>> [ Upstream commit 0fd1d37b0501efc6e295f56ab55cdaff784aa50c ]
>>
>> If we don't receive a response we can't assume that the server
>> granted one credit. Assume zero credits in such cases.
>>
>> Signed-off-by: Pavel Shilovsky <[email protected]>
>> Reviewed-by: Ronnie Sahlberg <[email protected]>
>> Signed-off-by: Steve French <[email protected]>
>> Signed-off-by: Sasha Levin <[email protected]>
>> ---
>> fs/cifs/smb2pdu.c | 15 +++++++++++----
>> 1 file changed, 11 insertions(+), 4 deletions(-)
>>
>> diff --git a/fs/cifs/smb2pdu.c b/fs/cifs/smb2pdu.c
>> index d1ae7cdb236d..3c44c51310c4 100644
>> --- a/fs/cifs/smb2pdu.c
>> +++ b/fs/cifs/smb2pdu.c
>> @@ -2834,9 +2834,10 @@ smb2_echo_callback(struct mid_q_entry *mid)
>> {
>> struct TCP_Server_Info *server = mid->callback_data;
>> struct smb2_echo_rsp *rsp = (struct smb2_echo_rsp *)mid->resp_buf;
>> - unsigned int credits_received = 1;
>> + unsigned int credits_received = 0;
>>
>> - if (mid->mid_state == MID_RESPONSE_RECEIVED)
>> + if (mid->mid_state == MID_RESPONSE_RECEIVED
>> + || mid->mid_state == MID_RESPONSE_MALFORMED)
>> credits_received = le16_to_cpu(rsp->sync_hdr.CreditRequest);
>>
>> DeleteMidQEntry(mid);
>> @@ -3093,7 +3094,7 @@ smb2_readv_callback(struct mid_q_entry *mid)
>> struct TCP_Server_Info *server = tcon->ses->server;
>> struct smb2_sync_hdr *shdr =
>> (struct smb2_sync_hdr *)rdata->iov[0].iov_base;
>> - unsigned int credits_received = 1;
>> + unsigned int credits_received = 0;
>> struct smb_rqst rqst = { .rq_iov = rdata->iov,
>> .rq_nvec = 2,
>> .rq_pages = rdata->pages,
>> @@ -3132,6 +3133,9 @@ smb2_readv_callback(struct mid_q_entry *mid)
>> task_io_account_read(rdata->got_bytes);
>> cifs_stats_bytes_read(tcon, rdata->got_bytes);
>> break;
>> + case MID_RESPONSE_MALFORMED:
>> + credits_received = le16_to_cpu(shdr->CreditRequest);
>> + /* fall through */
>> default:
>> if (rdata->result != -ENODATA)
>> rdata->result = -EIO;
>> @@ -3325,7 +3329,7 @@ smb2_writev_callback(struct mid_q_entry *mid)
>> struct cifs_tcon *tcon = tlink_tcon(wdata->cfile->tlink);
>> unsigned int written;
>> struct smb2_write_rsp *rsp = (struct smb2_write_rsp *)mid->resp_buf;
>> - unsigned int credits_received = 1;
>> + unsigned int credits_received = 0;
>>
>> switch (mid->mid_state) {
>> case MID_RESPONSE_RECEIVED:
>> @@ -3353,6 +3357,9 @@ smb2_writev_callback(struct mid_q_entry *mid)
>> case MID_RETRY_NEEDED:
>> wdata->result = -EAGAIN;
>> break;
>> + case MID_RESPONSE_MALFORMED:
>> + credits_received = le16_to_cpu(rsp->sync_hdr.CreditRequest);
>> + /* fall through */
>> default:
>> wdata->result = -EIO;
>> break;
>> --
>> 2.19.1
>>
>
>Can you also apply the following patch to 4.20.y and 4.19.y, please?
>
>https://patchwork.ozlabs.org/patch/1030180/
I'll queue it up for the next cycle as it has dependencies on stable@
commits that didn't make it in yet and I don't want to mess up with
Greg's flow. Thanks you!
--
Thanks,
Sasha
On Wed, Feb 27 2019 at 12:38pm -0500,
Sasha Levin <[email protected]> wrote:
> On Thu, Feb 14, 2019 at 10:49:09PM -0500, Mike Snitzer wrote:
> >On Thu, Feb 14 2019 at 9:08pm -0500,
> >Sasha Levin <[email protected]> wrote:
> >
> >>From: Mike Snitzer <[email protected]>
> >>
> >>[ Upstream commit 57c36519e4b949f89381053f7283f5d605595b42 ]
> >>
> >>DM's clone_bio() now benefits from using bio_trim() by fixing the fact
> >>that clone_bio() wasn't clearing BIO_SEG_VALID like bio_trim() does;
> >>which triggers blk_recount_segments() via bio_phys_segments().
> >>
> >>Reviewed-by: Ming Lei <[email protected]>
> >>Signed-off-by: Mike Snitzer <[email protected]>
> >>Signed-off-by: Sasha Levin <[email protected]>
> >
> >Please no, I later effectively reverted this change with commit
> >fa8db4948f522 ("dm: don't use bio_trim() afterall")
>
> I've dropped it, thank you.
>
> >(As and aside, I really shouldn't have to defend against stable@ bots
> >picking up a commit, like 57c36519e4b949f, that wasn't marked for
> >stable@.)
>
> Is it the case that this commit isn't appropriate for stable for some
> reason, or was it just buggy?
Commit 57c36519e4b9 exposed a bug elsewhere, as fixed by a truly
"stable" fix:
ff0c129d3b5ec ("dm crypt: don't overallocate the integrity tag space")
So the end result is commit 57c36519e4b9 is just bad to bring to a
"stable" kernel. It unlocks another bug for no meaningful benefit.
Mike
ср, 27 февр. 2019 г. в 09:54, Sasha Levin <[email protected]>:
>
> On Fri, Feb 15, 2019 at 08:10:47PM +0000, Pavel Shilovskiy wrote:
> >чт, 14 февр. 2019 г. в 18:40, Sasha Levin <[email protected]>:
> >>
> >> From: Pavel Shilovsky <[email protected]>
> >>
> >> [ Upstream commit 0fd1d37b0501efc6e295f56ab55cdaff784aa50c ]
> >>
> >> If we don't receive a response we can't assume that the server
> >> granted one credit. Assume zero credits in such cases.
> >>
> >> Signed-off-by: Pavel Shilovsky <[email protected]>
> >> Reviewed-by: Ronnie Sahlberg <[email protected]>
> >> Signed-off-by: Steve French <[email protected]>
> >> Signed-off-by: Sasha Levin <[email protected]>
> >> ---
> >> fs/cifs/smb2pdu.c | 15 +++++++++++----
> >> 1 file changed, 11 insertions(+), 4 deletions(-)
> >>
> >> diff --git a/fs/cifs/smb2pdu.c b/fs/cifs/smb2pdu.c
> >> index d1ae7cdb236d..3c44c51310c4 100644
> >> --- a/fs/cifs/smb2pdu.c
> >> +++ b/fs/cifs/smb2pdu.c
> >> @@ -2834,9 +2834,10 @@ smb2_echo_callback(struct mid_q_entry *mid)
> >> {
> >> struct TCP_Server_Info *server = mid->callback_data;
> >> struct smb2_echo_rsp *rsp = (struct smb2_echo_rsp *)mid->resp_buf;
> >> - unsigned int credits_received = 1;
> >> + unsigned int credits_received = 0;
> >>
> >> - if (mid->mid_state == MID_RESPONSE_RECEIVED)
> >> + if (mid->mid_state == MID_RESPONSE_RECEIVED
> >> + || mid->mid_state == MID_RESPONSE_MALFORMED)
> >> credits_received = le16_to_cpu(rsp->sync_hdr.CreditRequest);
> >>
> >> DeleteMidQEntry(mid);
> >> @@ -3093,7 +3094,7 @@ smb2_readv_callback(struct mid_q_entry *mid)
> >> struct TCP_Server_Info *server = tcon->ses->server;
> >> struct smb2_sync_hdr *shdr =
> >> (struct smb2_sync_hdr *)rdata->iov[0].iov_base;
> >> - unsigned int credits_received = 1;
> >> + unsigned int credits_received = 0;
> >> struct smb_rqst rqst = { .rq_iov = rdata->iov,
> >> .rq_nvec = 2,
> >> .rq_pages = rdata->pages,
> >> @@ -3132,6 +3133,9 @@ smb2_readv_callback(struct mid_q_entry *mid)
> >> task_io_account_read(rdata->got_bytes);
> >> cifs_stats_bytes_read(tcon, rdata->got_bytes);
> >> break;
> >> + case MID_RESPONSE_MALFORMED:
> >> + credits_received = le16_to_cpu(shdr->CreditRequest);
> >> + /* fall through */
> >> default:
> >> if (rdata->result != -ENODATA)
> >> rdata->result = -EIO;
> >> @@ -3325,7 +3329,7 @@ smb2_writev_callback(struct mid_q_entry *mid)
> >> struct cifs_tcon *tcon = tlink_tcon(wdata->cfile->tlink);
> >> unsigned int written;
> >> struct smb2_write_rsp *rsp = (struct smb2_write_rsp *)mid->resp_buf;
> >> - unsigned int credits_received = 1;
> >> + unsigned int credits_received = 0;
> >>
> >> switch (mid->mid_state) {
> >> case MID_RESPONSE_RECEIVED:
> >> @@ -3353,6 +3357,9 @@ smb2_writev_callback(struct mid_q_entry *mid)
> >> case MID_RETRY_NEEDED:
> >> wdata->result = -EAGAIN;
> >> break;
> >> + case MID_RESPONSE_MALFORMED:
> >> + credits_received = le16_to_cpu(rsp->sync_hdr.CreditRequest);
> >> + /* fall through */
> >> default:
> >> wdata->result = -EIO;
> >> break;
> >> --
> >> 2.19.1
> >>
> >
> >Can you also apply the following patch to 4.20.y and 4.19.y, please?
> >
> >https://patchwork.ozlabs.org/patch/1030180/
>
> I'll queue it up for the next cycle as it has dependencies on stable@
> commits that didn't make it in yet and I don't want to mess up with
> Greg's flow. Thanks you!
It seems that this one has already been merged to 4.20.11:
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=linux-4.20.y&id=7cb453e5a88169b2a5cec1e00778fc969efd1a77
So, between those two stable kernels only 4.19 doesn't have the patch.
--
Best regards,
Pavel Shilovsky