This is the start of the stable review cycle for the 4.19.76 release.
There are 63 patches in this series, all will be posted as a response
to this one. If anyone has any issues with these being applied, please
let me know.
Responses should be made by Tue 01 Oct 2019 01:47:47 PM UTC.
Anything received after that time might be too late.
The whole patch series can be found in one patch at:
https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.19.76-rc1.gz
or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.19.y
and the diffstat can be found below.
thanks,
greg k-h
-------------
Pseudo-Shortlog of commits:
Greg Kroah-Hartman <[email protected]>
Linux 4.19.76-rc1
Ka-Cheong Poon <[email protected]>
net/rds: An rds_sock is added too early to the hash table
Cong Wang <[email protected]>
net_sched: check cops->tcf_block in tc_bind_tclass()
Jian-Hong Pan <[email protected]>
Bluetooth: btrtl: Additional Realtek 8822CE Bluetooth devices
Fernando Fernandez Mancera <[email protected]>
netfilter: nft_socket: fix erroneous socket assignment
Darrick J. Wong <[email protected]>
xfs: don't crash on null attr fork xfs_bmapi_read
Ilia Mirkin <[email protected]>
drm/nouveau/disp/nv50-: fix center/aspect-corrected scaling
Hans de Goede <[email protected]>
ACPI: video: Add new hw_changes_brightness quirk, set it on PB Easynote MZ35
Jian-Hong Pan <[email protected]>
Bluetooth: btrtl: HCI reset on close for Realtek BT chip
Stephen Hemminger <[email protected]>
net: don't warn in inet diag when IPV6 is disabled
Chris Wilson <[email protected]>
drm: Flush output polling on shutdown
Chao Yu <[email protected]>
f2fs: fix to do sanity check on segment bitmap of LFS curseg
Michal Suchanek <[email protected]>
net/ibmvnic: Fix missing { in __ibmvnic_reset
Mikulas Patocka <[email protected]>
dm zoned: fix invalid memory access
Chao Yu <[email protected]>
Revert "f2fs: avoid out-of-range memory access"
zhengbin <[email protected]>
blk-mq: move cancel of requeue_work to the front of blk_exit_queue
Jianchao Wang <[email protected]>
blk-mq: change gfp flags to GFP_NOIO in blk_mq_realloc_hw_ctxs
Steven Price <[email protected]>
initramfs: don't free a non-existent initrd
Coly Li <[email protected]>
bcache: remove redundant LIST_HEAD(journal) from run_cache_set()
Dexuan Cui <[email protected]>
PCI: hv: Avoid use of hv_pci_dev->pci_slot after freeing it
Surbhi Palande <[email protected]>
f2fs: check all the data segments against all node ones
Marc Zyngier <[email protected]>
irqchip/gic-v3-its: Fix LPI release for Multi-MSI devices
Lorenz Bauer <[email protected]>
bpf: libbpf: retry loading program on EAGAIN
Shirish S <[email protected]>
Revert "drm/amd/powerplay: Enable/Disable NBPSTATE on On/OFF of UVD"
Himanshu Madhani <[email protected]>
scsi: qla2xxx: Return switch command on a timeout
Quinn Tran <[email protected]>
scsi: qla2xxx: Remove all rports if fabric scan retry fails
Quinn Tran <[email protected]>
scsi: qla2xxx: Turn off IOCB timeout timer on IOCB completion
Waiman Long <[email protected]>
locking/lockdep: Add debug_locks check in __lock_downgrade() - again
Waiman Long <[email protected]>
locking/lockdep: Add debug_locks check in __lock_downgrade()
David Lechner <[email protected]>
power: supply: sysfs: ratelimit property read error message
Nathan Chancellor <[email protected]>
pinctrl: sprd: Use define directive for sprd_pinconf_params values
Vadim Sukhomlinov <[email protected]>
tpm: Fix TPM 1.2 Shutdown sequence to prevent future TPM operations
Josh Poimboeuf <[email protected]>
objtool: Clobber user CFLAGS variable
Takashi Iwai <[email protected]>
ALSA: hda - Apply AMD controller workaround for Raven platform
Shih-Yuan Lee (FourDollars) <[email protected]>
ALSA: hda - Add laptop imic fixup for ASUS M9V laptop
Takashi Sakamoto <[email protected]>
ALSA: dice: fix wrong packet parameter for Alesis iO26
Jussi Laako <[email protected]>
ALSA: usb-audio: Add DSD support for EVGA NU Audio
Ilya Pshonkin <[email protected]>
ALSA: usb-audio: Add Hiby device family to quirks for native DSD support
Takashi Iwai <[email protected]>
ASoC: fsl: Fix of-node refcount unbalance in fsl_ssi_probe_from_dt()
Hans de Goede <[email protected]>
ASoC: Intel: cht_bsw_max98090_ti: Enable codec clock once and keep it enabled
Marco Felsch <[email protected]>
media: tvp5150: fix switch exit in set control handler
Naftali Goldstein <[email protected]>
iwlwifi: mvm: always init rs_fw with 20MHz bandwidth rates
Emmanuel Grumbach <[email protected]>
iwlwifi: mvm: send BCAST management frames to the right station
Saeed Mahameed <[email protected]>
net/mlx5e: Rx, Check ip headers sanity
Saeed Mahameed <[email protected]>
net/mlx5e: Rx, Fixup skb checksum for packets with tail padding
Saeed Mahameed <[email protected]>
net/mlx5e: XDP, Avoid checksum complete when XDP prog is loaded
Or Gerlitz <[email protected]>
net/mlx5e: Allow reporting of checksum unnecessary
Cong Wang <[email protected]>
mlx5: fix get_ip_proto()
Alaa Hleihel <[email protected]>
net/mlx5e: don't set CHECKSUM_COMPLETE on SCTP packets
Natali Shechtman <[email protected]>
net/mlx5e: Set ECN for received packets using CQE indication
Aurelien Aptel <[email protected]>
CIFS: fix deadlock in cached root handling
Gustavo A. R. Silva <[email protected]>
crypto: talitos - fix missing break in switch statement
Tokunori Ikegami <[email protected]>
mtd: cfi_cmdset_0002: Use chip_good() to retry in do_write_oneword()
Sebastian Parschauer <[email protected]>
HID: Add quirk for HP X500 PIXART OEM mouse
Alan Stern <[email protected]>
HID: hidraw: Fix invalid read in hidraw_ioctl
Alan Stern <[email protected]>
HID: logitech: Fix general protection fault caused by Logitech driver
Roderick Colenbrander <[email protected]>
HID: sony: Fix memory corruption issue on cleanup.
Alan Stern <[email protected]>
HID: prodikeys: Fix general protection fault during probe
Jack Morgenstein <[email protected]>
IB/core: Add an unbound WQ type to the new CQ API
Nick Desaulniers <[email protected]>
drm/amd/display: readd -msse2 to prevent Clang from emitting libcalls to undefined SW FP routines
Greg Kurz <[email protected]>
powerpc/xive: Fix bogus error code returned by OPAL
Leon Romanovsky <[email protected]>
RDMA/restrack: Protect from reentry to resource return path
Juliet Kim <[email protected]>
net/ibmvnic: free reset work of removed device from queue
Marcel Holtmann <[email protected]>
Revert "Bluetooth: validate BLE connection interval updates"
-------------
Diffstat:
Makefile | 4 +-
arch/powerpc/include/asm/opal.h | 2 +-
arch/powerpc/platforms/powernv/opal-wrappers.S | 2 +-
arch/powerpc/sysdev/xive/native.c | 11 ++
block/blk-core.c | 2 +-
block/blk-flush.c | 6 +-
block/blk-mq.c | 19 +--
block/blk-sysfs.c | 3 +
block/blk.h | 2 +-
drivers/acpi/acpi_video.c | 37 ++++++
drivers/bluetooth/btrtl.c | 20 +++
drivers/bluetooth/btrtl.h | 6 +
drivers/bluetooth/btusb.c | 4 +
drivers/char/tpm/tpm-chip.c | 3 +
drivers/crypto/talitos.c | 1 +
drivers/gpu/drm/amd/display/dc/calcs/Makefile | 4 +
drivers/gpu/drm/amd/display/dc/dml/Makefile | 4 +
drivers/gpu/drm/amd/powerplay/hwmgr/smu8_hwmgr.c | 5 +-
drivers/gpu/drm/drm_probe_helper.c | 9 +-
drivers/gpu/drm/nouveau/dispnv50/head.c | 28 ++++-
drivers/hid/hid-ids.h | 1 +
drivers/hid/hid-lg.c | 10 +-
drivers/hid/hid-lg4ff.c | 1 -
drivers/hid/hid-prodikeys.c | 12 +-
drivers/hid/hid-quirks.c | 1 +
drivers/hid/hid-sony.c | 2 +-
drivers/hid/hidraw.c | 2 +-
drivers/infiniband/core/cq.c | 8 +-
drivers/infiniband/core/device.c | 15 ++-
drivers/infiniband/core/mad.c | 2 +-
drivers/infiniband/core/restrack.c | 4 +-
drivers/irqchip/irq-gic-v3-its.c | 9 +-
drivers/md/bcache/super.c | 1 -
drivers/md/dm-zoned-target.c | 2 -
drivers/media/i2c/tvp5150.c | 2 +-
drivers/mtd/chips/cfi_cmdset_0002.c | 18 ++-
drivers/net/ethernet/ibm/ibmvnic.c | 9 +-
drivers/net/ethernet/mellanox/mlx5/core/en.h | 3 +
.../net/ethernet/mellanox/mlx5/core/en_ethtool.c | 28 +++++
drivers/net/ethernet/mellanox/mlx5/core/en_main.c | 8 ++
drivers/net/ethernet/mellanox/mlx5/core/en_rx.c | 126 ++++++++++++++++---
drivers/net/ethernet/mellanox/mlx5/core/en_stats.c | 9 ++
drivers/net/ethernet/mellanox/mlx5/core/en_stats.h | 6 +
drivers/net/wireless/intel/iwlwifi/mvm/rs-fw.c | 5 +-
drivers/net/wireless/intel/iwlwifi/mvm/rs.c | 2 +-
drivers/net/wireless/intel/iwlwifi/mvm/rs.h | 2 +-
drivers/net/wireless/intel/iwlwifi/mvm/tx.c | 2 +-
drivers/pci/controller/pci-hyperv.c | 2 +-
drivers/pinctrl/sprd/pinctrl-sprd.c | 6 +-
drivers/power/supply/power_supply_sysfs.c | 3 +-
drivers/scsi/qla2xxx/qla_gs.c | 134 +++++++++++----------
drivers/scsi/qla2xxx/qla_init.c | 11 +-
fs/cifs/smb2ops.c | 44 +++++++
fs/f2fs/segment.c | 44 ++++++-
fs/f2fs/super.c | 4 +-
fs/xfs/libxfs/xfs_bmap.c | 29 +++--
include/rdma/ib_verbs.h | 9 +-
init/initramfs.c | 2 +-
kernel/locking/lockdep.c | 6 +
net/bluetooth/hci_event.c | 5 -
net/bluetooth/l2cap_core.c | 9 +-
net/ipv4/raw_diag.c | 3 -
net/netfilter/nft_socket.c | 6 +-
net/rds/bind.c | 40 +++---
net/sched/sch_api.c | 2 +
sound/firewire/dice/dice-alesis.c | 2 +-
sound/pci/hda/hda_intel.c | 3 +-
sound/pci/hda/patch_analog.c | 1 +
sound/soc/fsl/fsl_ssi.c | 6 +-
sound/soc/intel/boards/cht_bsw_max98090_ti.c | 47 +++++++-
sound/usb/quirks.c | 2 +
tools/lib/bpf/bpf.c | 17 ++-
tools/objtool/Makefile | 2 +-
73 files changed, 669 insertions(+), 232 deletions(-)
From: Alaa Hleihel <[email protected]>
[ Upstream commit fe1dc069990c1f290ef6b99adb46332c03258f38 ]
CHECKSUM_COMPLETE is not applicable to SCTP protocol.
Setting it for SCTP packets leads to CRC32c validation failure.
Fixes: bbceefce9adf ("net/mlx5e: Support RX CHECKSUM_COMPLETE")
Signed-off-by: Alaa Hleihel <[email protected]>
Reviewed-by: Or Gerlitz <[email protected]>
Signed-off-by: Saeed Mahameed <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/mellanox/mlx5/core/en_rx.c | 11 +++++++++++
1 file changed, 11 insertions(+)
--- a/drivers/net/ethernet/mellanox/mlx5/core/en_rx.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_rx.c
@@ -725,6 +725,14 @@ static u32 mlx5e_get_fcs(const struct sk
return __get_unaligned_cpu32(fcs_bytes);
}
+static u8 get_ip_proto(struct sk_buff *skb, __be16 proto)
+{
+ void *ip_p = skb->data + sizeof(struct ethhdr);
+
+ return (proto == htons(ETH_P_IP)) ? ((struct iphdr *)ip_p)->protocol :
+ ((struct ipv6hdr *)ip_p)->nexthdr;
+}
+
#define short_frame(size) ((size) <= ETH_ZLEN + ETH_FCS_LEN)
static inline void mlx5e_handle_csum(struct net_device *netdev,
@@ -758,6 +766,9 @@ static inline void mlx5e_handle_csum(str
goto csum_unnecessary;
if (likely(is_last_ethertype_ip(skb, &network_depth, &proto))) {
+ if (unlikely(get_ip_proto(skb, proto) == IPPROTO_SCTP))
+ goto csum_unnecessary;
+
skb->ip_summed = CHECKSUM_COMPLETE;
skb->csum = csum_unfold((__force __sum16)cqe->check_sum);
if (network_depth > ETH_HLEN)
From: Jack Morgenstein <[email protected]>
commit f794809a7259dfaa3d47d90ef5a86007cf48b1ce upstream.
The upstream kernel commit cited below modified the workqueue in the
new CQ API to be bound to a specific CPU (instead of being unbound).
This caused ALL users of the new CQ API to use the same bound WQ.
Specifically, MAD handling was severely delayed when the CPU bound
to the WQ was busy handling (higher priority) interrupts.
This caused a delay in the MAD "heartbeat" response handling,
which resulted in ports being incorrectly classified as "down".
To fix this, add a new "unbound" WQ type to the new CQ API, so that users
have the option to choose either a bound WQ or an unbound WQ.
For MADs, choose the new "unbound" WQ.
Fixes: b7363e67b23e ("IB/device: Convert ib-comp-wq to be CPU-bound")
Signed-off-by: Jack Morgenstein <[email protected]>
Signed-off-by: Leon Romanovsky <[email protected]>
Reviewed-by: Sagi Grimberg <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/infiniband/core/cq.c | 8 ++++++--
drivers/infiniband/core/device.c | 15 ++++++++++++++-
drivers/infiniband/core/mad.c | 2 +-
include/rdma/ib_verbs.h | 9 ++++++---
4 files changed, 27 insertions(+), 7 deletions(-)
--- a/drivers/infiniband/core/cq.c
+++ b/drivers/infiniband/core/cq.c
@@ -112,12 +112,12 @@ static void ib_cq_poll_work(struct work_
IB_POLL_BATCH);
if (completed >= IB_POLL_BUDGET_WORKQUEUE ||
ib_req_notify_cq(cq, IB_POLL_FLAGS) > 0)
- queue_work(ib_comp_wq, &cq->work);
+ queue_work(cq->comp_wq, &cq->work);
}
static void ib_cq_completion_workqueue(struct ib_cq *cq, void *private)
{
- queue_work(ib_comp_wq, &cq->work);
+ queue_work(cq->comp_wq, &cq->work);
}
/**
@@ -175,9 +175,12 @@ struct ib_cq *__ib_alloc_cq(struct ib_de
ib_req_notify_cq(cq, IB_CQ_NEXT_COMP);
break;
case IB_POLL_WORKQUEUE:
+ case IB_POLL_UNBOUND_WORKQUEUE:
cq->comp_handler = ib_cq_completion_workqueue;
INIT_WORK(&cq->work, ib_cq_poll_work);
ib_req_notify_cq(cq, IB_CQ_NEXT_COMP);
+ cq->comp_wq = (cq->poll_ctx == IB_POLL_WORKQUEUE) ?
+ ib_comp_wq : ib_comp_unbound_wq;
break;
default:
ret = -EINVAL;
@@ -213,6 +216,7 @@ void ib_free_cq(struct ib_cq *cq)
irq_poll_disable(&cq->iop);
break;
case IB_POLL_WORKQUEUE:
+ case IB_POLL_UNBOUND_WORKQUEUE:
cancel_work_sync(&cq->work);
break;
default:
--- a/drivers/infiniband/core/device.c
+++ b/drivers/infiniband/core/device.c
@@ -61,6 +61,7 @@ struct ib_client_data {
};
struct workqueue_struct *ib_comp_wq;
+struct workqueue_struct *ib_comp_unbound_wq;
struct workqueue_struct *ib_wq;
EXPORT_SYMBOL_GPL(ib_wq);
@@ -1166,10 +1167,19 @@ static int __init ib_core_init(void)
goto err;
}
+ ib_comp_unbound_wq =
+ alloc_workqueue("ib-comp-unb-wq",
+ WQ_UNBOUND | WQ_HIGHPRI | WQ_MEM_RECLAIM |
+ WQ_SYSFS, WQ_UNBOUND_MAX_ACTIVE);
+ if (!ib_comp_unbound_wq) {
+ ret = -ENOMEM;
+ goto err_comp;
+ }
+
ret = class_register(&ib_class);
if (ret) {
pr_warn("Couldn't create InfiniBand device class\n");
- goto err_comp;
+ goto err_comp_unbound;
}
ret = rdma_nl_init();
@@ -1218,6 +1228,8 @@ err_ibnl:
rdma_nl_exit();
err_sysfs:
class_unregister(&ib_class);
+err_comp_unbound:
+ destroy_workqueue(ib_comp_unbound_wq);
err_comp:
destroy_workqueue(ib_comp_wq);
err:
@@ -1236,6 +1248,7 @@ static void __exit ib_core_cleanup(void)
addr_cleanup();
rdma_nl_exit();
class_unregister(&ib_class);
+ destroy_workqueue(ib_comp_unbound_wq);
destroy_workqueue(ib_comp_wq);
/* Make sure that any pending umem accounting work is done. */
destroy_workqueue(ib_wq);
--- a/drivers/infiniband/core/mad.c
+++ b/drivers/infiniband/core/mad.c
@@ -3190,7 +3190,7 @@ static int ib_mad_port_open(struct ib_de
}
port_priv->cq = ib_alloc_cq(port_priv->device, port_priv, cq_size, 0,
- IB_POLL_WORKQUEUE);
+ IB_POLL_UNBOUND_WORKQUEUE);
if (IS_ERR(port_priv->cq)) {
dev_err(&device->dev, "Couldn't create ib_mad CQ\n");
ret = PTR_ERR(port_priv->cq);
--- a/include/rdma/ib_verbs.h
+++ b/include/rdma/ib_verbs.h
@@ -71,6 +71,7 @@
extern struct workqueue_struct *ib_wq;
extern struct workqueue_struct *ib_comp_wq;
+extern struct workqueue_struct *ib_comp_unbound_wq;
union ib_gid {
u8 raw[16];
@@ -1576,9 +1577,10 @@ struct ib_ah {
typedef void (*ib_comp_handler)(struct ib_cq *cq, void *cq_context);
enum ib_poll_context {
- IB_POLL_DIRECT, /* caller context, no hw completions */
- IB_POLL_SOFTIRQ, /* poll from softirq context */
- IB_POLL_WORKQUEUE, /* poll from workqueue */
+ IB_POLL_DIRECT, /* caller context, no hw completions */
+ IB_POLL_SOFTIRQ, /* poll from softirq context */
+ IB_POLL_WORKQUEUE, /* poll from workqueue */
+ IB_POLL_UNBOUND_WORKQUEUE, /* poll from unbound workqueue */
};
struct ib_cq {
@@ -1595,6 +1597,7 @@ struct ib_cq {
struct irq_poll iop;
struct work_struct work;
};
+ struct workqueue_struct *comp_wq;
/*
* Implementation details of the RDMA core, don't use in drivers:
*/
From: Hans de Goede <[email protected]>
commit 4bcdec39c454c4e8f9512115bdcc3efec1ba5f55 upstream.
Users have been seeing sound stability issues with max98090 codecs since:
commit 648e921888ad ("clk: x86: Stop marking clocks as CLK_IS_CRITICAL")
At first that commit broke sound for Chromebook Swanky and Clapper models,
the problem was that the machine-driver has been controlling the wrong
clock on those models since support for them was added. This was hidden by
clk-pmc-atom.c keeping the actual clk on unconditionally.
With the machine-driver controlling the proper clock, sound works again
but we are seeing bug reports describing it as: low volume,
"sounds like played at 10x speed" and instable.
When these issues are hit the following message is seen in dmesg:
"max98090 i2c-193C9890:00: PLL unlocked".
Attempts have been made to fix this by inserting a delay between enabling
the clk and enabling and checking the pll, but this has not helped.
It seems that at least on boards which use pmc_plt_clk_0 as clock,
if we ever disable the clk, the pll looses its lock and after that we get
various issues.
This commit fixes this by enabling the clock once at probe time on
these boards. In essence this restores the old behavior of clk-pmc-atom.c
always keeping the clk on on these boards.
Fixes: 648e921888ad ("clk: x86: Stop marking clocks as CLK_IS_CRITICAL")
Reported-by: Mogens Jensen <[email protected]>
Reported-by: Dean Wallace <[email protected]>
Signed-off-by: Hans de Goede <[email protected]>
Acked-by: Pierre-Louis Bossart <[email protected]>
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
sound/soc/intel/boards/cht_bsw_max98090_ti.c | 47 +++++++++++++++++++++++----
1 file changed, 41 insertions(+), 6 deletions(-)
--- a/sound/soc/intel/boards/cht_bsw_max98090_ti.c
+++ b/sound/soc/intel/boards/cht_bsw_max98090_ti.c
@@ -42,6 +42,7 @@ struct cht_mc_private {
struct clk *mclk;
struct snd_soc_jack jack;
bool ts3a227e_present;
+ int quirks;
};
static int platform_clock_control(struct snd_soc_dapm_widget *w,
@@ -53,6 +54,10 @@ static int platform_clock_control(struct
struct cht_mc_private *ctx = snd_soc_card_get_drvdata(card);
int ret;
+ /* See the comment in snd_cht_mc_probe() */
+ if (ctx->quirks & QUIRK_PMC_PLT_CLK_0)
+ return 0;
+
codec_dai = snd_soc_card_get_codec_dai(card, CHT_CODEC_DAI);
if (!codec_dai) {
dev_err(card->dev, "Codec dai not found; Unable to set platform clock\n");
@@ -222,6 +227,10 @@ static int cht_codec_init(struct snd_soc
"jack detection gpios not added, error %d\n", ret);
}
+ /* See the comment in snd_cht_mc_probe() */
+ if (ctx->quirks & QUIRK_PMC_PLT_CLK_0)
+ return 0;
+
/*
* The firmware might enable the clock at
* boot (this information may or may not
@@ -420,16 +429,15 @@ static int snd_cht_mc_probe(struct platf
int ret_val = 0;
struct cht_mc_private *drv;
const char *mclk_name;
- int quirks = 0;
-
- dmi_id = dmi_first_match(cht_max98090_quirk_table);
- if (dmi_id)
- quirks = (unsigned long)dmi_id->driver_data;
drv = devm_kzalloc(&pdev->dev, sizeof(*drv), GFP_KERNEL);
if (!drv)
return -ENOMEM;
+ dmi_id = dmi_first_match(cht_max98090_quirk_table);
+ if (dmi_id)
+ drv->quirks = (unsigned long)dmi_id->driver_data;
+
drv->ts3a227e_present = acpi_dev_found("104C227E");
if (!drv->ts3a227e_present) {
/* no need probe TI jack detection chip */
@@ -446,7 +454,7 @@ static int snd_cht_mc_probe(struct platf
snd_soc_card_cht.dev = &pdev->dev;
snd_soc_card_set_drvdata(&snd_soc_card_cht, drv);
- if (quirks & QUIRK_PMC_PLT_CLK_0)
+ if (drv->quirks & QUIRK_PMC_PLT_CLK_0)
mclk_name = "pmc_plt_clk_0";
else
mclk_name = "pmc_plt_clk_3";
@@ -459,6 +467,21 @@ static int snd_cht_mc_probe(struct platf
return PTR_ERR(drv->mclk);
}
+ /*
+ * Boards which have the MAX98090's clk connected to clk_0 do not seem
+ * to like it if we muck with the clock. If we disable the clock when
+ * it is unused we get "max98090 i2c-193C9890:00: PLL unlocked" errors
+ * and the PLL never seems to lock again.
+ * So for these boards we enable it here once and leave it at that.
+ */
+ if (drv->quirks & QUIRK_PMC_PLT_CLK_0) {
+ ret_val = clk_prepare_enable(drv->mclk);
+ if (ret_val < 0) {
+ dev_err(&pdev->dev, "MCLK enable error: %d\n", ret_val);
+ return ret_val;
+ }
+ }
+
ret_val = devm_snd_soc_register_card(&pdev->dev, &snd_soc_card_cht);
if (ret_val) {
dev_err(&pdev->dev,
@@ -469,11 +492,23 @@ static int snd_cht_mc_probe(struct platf
return ret_val;
}
+static int snd_cht_mc_remove(struct platform_device *pdev)
+{
+ struct snd_soc_card *card = platform_get_drvdata(pdev);
+ struct cht_mc_private *ctx = snd_soc_card_get_drvdata(card);
+
+ if (ctx->quirks & QUIRK_PMC_PLT_CLK_0)
+ clk_disable_unprepare(ctx->mclk);
+
+ return 0;
+}
+
static struct platform_driver snd_cht_mc_driver = {
.driver = {
.name = "cht-bsw-max98090",
},
.probe = snd_cht_mc_probe,
+ .remove = snd_cht_mc_remove,
};
module_platform_driver(snd_cht_mc_driver)
From: Takashi Iwai <[email protected]>
commit 2757970f6d0d0a112247600b23d38c0c728ceeb3 upstream.
The node obtained from of_find_node_by_path() has to be unreferenced
after the use, but we forgot it for the root node.
Fixes: f0fba2ad1b6b ("ASoC: multi-component - ASoC Multi-Component Support")
Cc: Timur Tabi <[email protected]>
Cc: Nicolin Chen <[email protected]>
Cc: Xiubo Li <[email protected]>
Cc: Fabio Estevam <[email protected]>
Signed-off-by: Takashi Iwai <[email protected]>
Acked-by: Nicolin Chen <[email protected]>
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
sound/soc/fsl/fsl_ssi.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
--- a/sound/soc/fsl/fsl_ssi.c
+++ b/sound/soc/fsl/fsl_ssi.c
@@ -1439,8 +1439,10 @@ static int fsl_ssi_probe_from_dt(struct
* different name to register the device.
*/
if (!ssi->card_name[0] && of_get_property(np, "codec-handle", NULL)) {
- sprop = of_get_property(of_find_node_by_path("/"),
- "compatible", NULL);
+ struct device_node *root = of_find_node_by_path("/");
+
+ sprop = of_get_property(root, "compatible", NULL);
+ of_node_put(root);
/* Strip "fsl," in the compatible name if applicable */
p = strrchr(sprop, ',');
if (p)
From: Ilya Pshonkin <[email protected]>
commit 029d2c0fd61eac74700fb4ffff36fc63bfff7e5e upstream.
This patch adds quirk VID ID for Hiby portable players family with
native DSD playback support.
Signed-off-by: Ilya Pshonkin <[email protected]>
Cc: <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
sound/usb/quirks.c | 1 +
1 file changed, 1 insertion(+)
--- a/sound/usb/quirks.c
+++ b/sound/usb/quirks.c
@@ -1449,6 +1449,7 @@ u64 snd_usb_interface_dsd_format_quirks(
case 0x152a: /* Thesycon devices */
case 0x25ce: /* Mytek devices */
case 0x2ab6: /* T+A devices */
+ case 0xc502: /* HiBy devices */
if (fp->dsd_raw)
return SNDRV_PCM_FMTBIT_DSD_U32_BE;
break;
From: Jussi Laako <[email protected]>
commit f41f900568d9ffd896cc941db7021eb14bd55910 upstream.
EVGA NU Audio is actually a USB audio device on a PCIexpress card,
with it's own USB controller. It supports both PCM and DSD.
Signed-off-by: Jussi Laako <[email protected]>
Cc: <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
sound/usb/quirks.c | 1 +
1 file changed, 1 insertion(+)
--- a/sound/usb/quirks.c
+++ b/sound/usb/quirks.c
@@ -1449,6 +1449,7 @@ u64 snd_usb_interface_dsd_format_quirks(
case 0x152a: /* Thesycon devices */
case 0x25ce: /* Mytek devices */
case 0x2ab6: /* T+A devices */
+ case 0x3842: /* EVGA */
case 0xc502: /* HiBy devices */
if (fp->dsd_raw)
return SNDRV_PCM_FMTBIT_DSD_U32_BE;
From: Takashi Sakamoto <[email protected]>
commit 3a9236e97207f2469254b4098995159b80174d95 upstream.
At higher sampling rate (e.g. 192.0 kHz), Alesis iO26 transfers 4 data
channels per data block in CIP.
Both iO14 and iO26 have the same contents in their configuration ROM.
For this reason, ALSA Dice driver attempts to distinguish them according
to the value of TX0_AUDIO register at probe callback. Although the way is
valid at lower and middle sampling rate, it's lastly invalid at higher
sampling rate because because the two models returns the same value for
read transaction to the register.
In the most cases, users just plug-in the device and ALSA dice driver
detects it. In the case, the device runs at lower sampling rate and
the driver detects expectedly. For this reason, this commit leaves the
way to detect as is.
Fixes: 28b208f600a3 ("ALSA: dice: add parameters of stream formats for models produced by Alesis")
Cc: <[email protected]> # v4.18+
Signed-off-by: Takashi Sakamoto <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
sound/firewire/dice/dice-alesis.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/sound/firewire/dice/dice-alesis.c
+++ b/sound/firewire/dice/dice-alesis.c
@@ -15,7 +15,7 @@ alesis_io14_tx_pcm_chs[MAX_STREAMS][SND_
static const unsigned int
alesis_io26_tx_pcm_chs[MAX_STREAMS][SND_DICE_RATE_MODE_COUNT] = {
- {10, 10, 8}, /* Tx0 = Analog + S/PDIF. */
+ {10, 10, 4}, /* Tx0 = Analog + S/PDIF. */
{16, 8, 0}, /* Tx1 = ADAT1 + ADAT2. */
};
From: Josh Poimboeuf <[email protected]>
commit f73b3cc39c84220e6dccd463b5c8279b03514646 upstream.
If the build user has the CFLAGS variable set in their environment,
objtool blindly appends to it, which can cause unexpected behavior.
Clobber CFLAGS to ensure consistent objtool compilation behavior.
Reported-by: Valdis Kletnieks <[email protected]>
Tested-by: Valdis Kletnieks <[email protected]>
Signed-off-by: Josh Poimboeuf <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Link: https://lkml.kernel.org/r/83a276df209962e6058fcb6c615eef9d401c21bc.1567121311.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <[email protected]>
CC: Nathan Chancellor <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
tools/objtool/Makefile | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/tools/objtool/Makefile
+++ b/tools/objtool/Makefile
@@ -35,7 +35,7 @@ INCLUDES := -I$(srctree)/tools/include \
-I$(srctree)/tools/arch/$(HOSTARCH)/include/uapi \
-I$(srctree)/tools/objtool/arch/$(ARCH)/include
WARNINGS := $(EXTRA_WARNINGS) -Wno-switch-default -Wno-switch-enum -Wno-packed
-CFLAGS += -Werror $(WARNINGS) $(KBUILD_HOSTCFLAGS) -g $(INCLUDES) $(LIBELF_FLAGS)
+CFLAGS := -Werror $(WARNINGS) $(KBUILD_HOSTCFLAGS) -g $(INCLUDES) $(LIBELF_FLAGS)
LDFLAGS += $(LIBELF_LIBS) $(LIBSUBCMD) $(KBUILD_HOSTLDFLAGS)
# Allow old libelf to be used:
From: Or Gerlitz <[email protected]>
[ Upstream commit b856df28f9230a47669efbdd57896084caadb2b3 ]
Currently we practically never report checksum unnecessary, because
for all IP packets we take the checksum complete path.
Enable non-default runs with reprorting checksum unnecessary, using
an ethtool private flag. This can be useful for performance evals
and other explorations.
Required by downstream patch which fixes XDP checksum.
Fixes: 86994156c736 ("net/mlx5e: XDP fast RX drop bpf programs support")
Signed-off-by: Or Gerlitz <[email protected]>
Reviewed-by: Tariq Toukan <[email protected]>
Signed-off-by: Saeed Mahameed <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/mellanox/mlx5/core/en.h | 3 ++
drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c | 27 +++++++++++++++++++
drivers/net/ethernet/mellanox/mlx5/core/en_main.c | 4 ++
drivers/net/ethernet/mellanox/mlx5/core/en_rx.c | 3 ++
4 files changed, 37 insertions(+)
--- a/drivers/net/ethernet/mellanox/mlx5/core/en.h
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en.h
@@ -210,6 +210,7 @@ static const char mlx5e_priv_flags[][ETH
"tx_cqe_moder",
"rx_cqe_compress",
"rx_striding_rq",
+ "rx_no_csum_complete",
};
enum mlx5e_priv_flag {
@@ -217,6 +218,7 @@ enum mlx5e_priv_flag {
MLX5E_PFLAG_TX_CQE_BASED_MODER = (1 << 1),
MLX5E_PFLAG_RX_CQE_COMPRESS = (1 << 2),
MLX5E_PFLAG_RX_STRIDING_RQ = (1 << 3),
+ MLX5E_PFLAG_RX_NO_CSUM_COMPLETE = (1 << 4),
};
#define MLX5E_SET_PFLAG(params, pflag, enable) \
@@ -298,6 +300,7 @@ struct mlx5e_dcbx_dp {
enum {
MLX5E_RQ_STATE_ENABLED,
MLX5E_RQ_STATE_AM,
+ MLX5E_RQ_STATE_NO_CSUM_COMPLETE,
};
struct mlx5e_cq {
--- a/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c
@@ -1510,6 +1510,27 @@ static int set_pflag_rx_striding_rq(stru
return 0;
}
+static int set_pflag_rx_no_csum_complete(struct net_device *netdev, bool enable)
+{
+ struct mlx5e_priv *priv = netdev_priv(netdev);
+ struct mlx5e_channels *channels = &priv->channels;
+ struct mlx5e_channel *c;
+ int i;
+
+ if (!test_bit(MLX5E_STATE_OPENED, &priv->state))
+ return 0;
+
+ for (i = 0; i < channels->num; i++) {
+ c = channels->c[i];
+ if (enable)
+ __set_bit(MLX5E_RQ_STATE_NO_CSUM_COMPLETE, &c->rq.state);
+ else
+ __clear_bit(MLX5E_RQ_STATE_NO_CSUM_COMPLETE, &c->rq.state);
+ }
+
+ return 0;
+}
+
static int mlx5e_handle_pflag(struct net_device *netdev,
u32 wanted_flags,
enum mlx5e_priv_flag flag,
@@ -1561,6 +1582,12 @@ static int mlx5e_set_priv_flags(struct n
err = mlx5e_handle_pflag(netdev, pflags,
MLX5E_PFLAG_RX_STRIDING_RQ,
set_pflag_rx_striding_rq);
+ if (err)
+ goto out;
+
+ err = mlx5e_handle_pflag(netdev, pflags,
+ MLX5E_PFLAG_RX_NO_CSUM_COMPLETE,
+ set_pflag_rx_no_csum_complete);
out:
mutex_unlock(&priv->state_lock);
--- a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c
@@ -934,6 +934,9 @@ static int mlx5e_open_rq(struct mlx5e_ch
if (params->rx_dim_enabled)
__set_bit(MLX5E_RQ_STATE_AM, &c->rq.state);
+ if (params->pflags & MLX5E_PFLAG_RX_NO_CSUM_COMPLETE)
+ __set_bit(MLX5E_RQ_STATE_NO_CSUM_COMPLETE, &c->rq.state);
+
return 0;
err_destroy_rq:
@@ -4533,6 +4536,7 @@ void mlx5e_build_nic_params(struct mlx5_
params->rx_cqe_compress_def = slow_pci_heuristic(mdev);
MLX5E_SET_PFLAG(params, MLX5E_PFLAG_RX_CQE_COMPRESS, params->rx_cqe_compress_def);
+ MLX5E_SET_PFLAG(params, MLX5E_PFLAG_RX_NO_CSUM_COMPLETE, false);
/* RQ */
/* Prefer Striding RQ, unless any of the following holds:
--- a/drivers/net/ethernet/mellanox/mlx5/core/en_rx.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_rx.c
@@ -754,6 +754,9 @@ static inline void mlx5e_handle_csum(str
return;
}
+ if (unlikely(test_bit(MLX5E_RQ_STATE_NO_CSUM_COMPLETE, &rq->state)))
+ goto csum_unnecessary;
+
/* CQE csum doesn't cover padding octets in short ethernet
* frames. And the pad field is appended prior to calculating
* and appending the FCS field.
From: Cong Wang <[email protected]>
[ Upstream commit ef6fcd455278c2be3032a346cc66d9dd9866b787 ]
IP header is not necessarily located right after struct ethhdr,
there could be multiple 802.1Q headers in between, this is why
we call __vlan_get_protocol().
Fixes: fe1dc069990c ("net/mlx5e: don't set CHECKSUM_COMPLETE on SCTP packets")
Cc: Alaa Hleihel <[email protected]>
Cc: Or Gerlitz <[email protected]>
Cc: Saeed Mahameed <[email protected]>
Signed-off-by: Cong Wang <[email protected]>
Reviewed-by: Tariq Toukan <[email protected]>
Acked-by: Saeed Mahameed <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Saeed Mahameed <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/mellanox/mlx5/core/en_rx.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
--- a/drivers/net/ethernet/mellanox/mlx5/core/en_rx.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_rx.c
@@ -725,9 +725,9 @@ static u32 mlx5e_get_fcs(const struct sk
return __get_unaligned_cpu32(fcs_bytes);
}
-static u8 get_ip_proto(struct sk_buff *skb, __be16 proto)
+static u8 get_ip_proto(struct sk_buff *skb, int network_depth, __be16 proto)
{
- void *ip_p = skb->data + sizeof(struct ethhdr);
+ void *ip_p = skb->data + network_depth;
return (proto == htons(ETH_P_IP)) ? ((struct iphdr *)ip_p)->protocol :
((struct ipv6hdr *)ip_p)->nexthdr;
@@ -766,7 +766,7 @@ static inline void mlx5e_handle_csum(str
goto csum_unnecessary;
if (likely(is_last_ethertype_ip(skb, &network_depth, &proto))) {
- if (unlikely(get_ip_proto(skb, proto) == IPPROTO_SCTP))
+ if (unlikely(get_ip_proto(skb, network_depth, proto) == IPPROTO_SCTP))
goto csum_unnecessary;
skb->ip_summed = CHECKSUM_COMPLETE;
From: Saeed Mahameed <[email protected]>
[ Upstream commit 5d0bb3bac4b9f6c22280b04545626fdfd99edc6b ]
XDP programs might change packets data contents which will make the
reported skb checksum (checksum complete) invalid.
When XDP programs are loaded/unloaded set/clear rx RQs
MLX5E_RQ_STATE_NO_CSUM_COMPLETE flag.
Fixes: 86994156c736 ("net/mlx5e: XDP fast RX drop bpf programs support")
Reviewed-by: Tariq Toukan <[email protected]>
Signed-off-by: Saeed Mahameed <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c | 3 ++-
drivers/net/ethernet/mellanox/mlx5/core/en_main.c | 6 +++++-
drivers/net/ethernet/mellanox/mlx5/core/en_rx.c | 3 ++-
3 files changed, 9 insertions(+), 3 deletions(-)
--- a/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c
@@ -1517,7 +1517,8 @@ static int set_pflag_rx_no_csum_complete
struct mlx5e_channel *c;
int i;
- if (!test_bit(MLX5E_STATE_OPENED, &priv->state))
+ if (!test_bit(MLX5E_STATE_OPENED, &priv->state) ||
+ priv->channels.params.xdp_prog)
return 0;
for (i = 0; i < channels->num; i++) {
--- a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c
@@ -934,7 +934,11 @@ static int mlx5e_open_rq(struct mlx5e_ch
if (params->rx_dim_enabled)
__set_bit(MLX5E_RQ_STATE_AM, &c->rq.state);
- if (params->pflags & MLX5E_PFLAG_RX_NO_CSUM_COMPLETE)
+ /* We disable csum_complete when XDP is enabled since
+ * XDP programs might manipulate packets which will render
+ * skb->checksum incorrect.
+ */
+ if (MLX5E_GET_PFLAG(params, MLX5E_PFLAG_RX_NO_CSUM_COMPLETE) || c->xdp)
__set_bit(MLX5E_RQ_STATE_NO_CSUM_COMPLETE, &c->rq.state);
return 0;
--- a/drivers/net/ethernet/mellanox/mlx5/core/en_rx.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_rx.c
@@ -754,7 +754,8 @@ static inline void mlx5e_handle_csum(str
return;
}
- if (unlikely(test_bit(MLX5E_RQ_STATE_NO_CSUM_COMPLETE, &rq->state)))
+ /* True when explicitly set via priv flag, or XDP prog is loaded */
+ if (test_bit(MLX5E_RQ_STATE_NO_CSUM_COMPLETE, &rq->state))
goto csum_unnecessary;
/* CQE csum doesn't cover padding octets in short ethernet
From: Saeed Mahameed <[email protected]>
[ Upstream commit 0aa1d18615c163f92935b806dcaff9157645233a ]
When an ethernet frame with ip payload is padded, the padding octets are
not covered by the hardware checksum.
Prior to the cited commit, skb checksum was forced to be CHECKSUM_NONE
when padding is detected. After it, the kernel will try to trim the
padding bytes and subtract their checksum from skb->csum.
In this patch we fixup skb->csum for any ip packet with tail padding of
any size, if any padding found.
FCS case is just one special case of this general purpose patch, hence,
it is removed.
Fixes: 88078d98d1bb ("net: pskb_trim_rcsum() and CHECKSUM_COMPLETE are friends"),
Cc: Eric Dumazet <[email protected]>
Reviewed-by: Tariq Toukan <[email protected]>
Signed-off-by: Saeed Mahameed <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/mellanox/mlx5/core/en_rx.c | 79 +++++++++++++++++----
drivers/net/ethernet/mellanox/mlx5/core/en_stats.c | 6 +
drivers/net/ethernet/mellanox/mlx5/core/en_stats.h | 4 +
3 files changed, 74 insertions(+), 15 deletions(-)
--- a/drivers/net/ethernet/mellanox/mlx5/core/en_rx.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_rx.c
@@ -714,17 +714,6 @@ static inline void mlx5e_enable_ecn(stru
rq->stats->ecn_mark += !!rc;
}
-static u32 mlx5e_get_fcs(const struct sk_buff *skb)
-{
- const void *fcs_bytes;
- u32 _fcs_bytes;
-
- fcs_bytes = skb_header_pointer(skb, skb->len - ETH_FCS_LEN,
- ETH_FCS_LEN, &_fcs_bytes);
-
- return __get_unaligned_cpu32(fcs_bytes);
-}
-
static u8 get_ip_proto(struct sk_buff *skb, int network_depth, __be16 proto)
{
void *ip_p = skb->data + network_depth;
@@ -735,6 +724,68 @@ static u8 get_ip_proto(struct sk_buff *s
#define short_frame(size) ((size) <= ETH_ZLEN + ETH_FCS_LEN)
+#define MAX_PADDING 8
+
+static void
+tail_padding_csum_slow(struct sk_buff *skb, int offset, int len,
+ struct mlx5e_rq_stats *stats)
+{
+ stats->csum_complete_tail_slow++;
+ skb->csum = csum_block_add(skb->csum,
+ skb_checksum(skb, offset, len, 0),
+ offset);
+}
+
+static void
+tail_padding_csum(struct sk_buff *skb, int offset,
+ struct mlx5e_rq_stats *stats)
+{
+ u8 tail_padding[MAX_PADDING];
+ int len = skb->len - offset;
+ void *tail;
+
+ if (unlikely(len > MAX_PADDING)) {
+ tail_padding_csum_slow(skb, offset, len, stats);
+ return;
+ }
+
+ tail = skb_header_pointer(skb, offset, len, tail_padding);
+ if (unlikely(!tail)) {
+ tail_padding_csum_slow(skb, offset, len, stats);
+ return;
+ }
+
+ stats->csum_complete_tail++;
+ skb->csum = csum_block_add(skb->csum, csum_partial(tail, len, 0), offset);
+}
+
+static void
+mlx5e_skb_padding_csum(struct sk_buff *skb, int network_depth, __be16 proto,
+ struct mlx5e_rq_stats *stats)
+{
+ struct ipv6hdr *ip6;
+ struct iphdr *ip4;
+ int pkt_len;
+
+ switch (proto) {
+ case htons(ETH_P_IP):
+ ip4 = (struct iphdr *)(skb->data + network_depth);
+ pkt_len = network_depth + ntohs(ip4->tot_len);
+ break;
+ case htons(ETH_P_IPV6):
+ ip6 = (struct ipv6hdr *)(skb->data + network_depth);
+ pkt_len = network_depth + sizeof(*ip6) + ntohs(ip6->payload_len);
+ break;
+ default:
+ return;
+ }
+
+ if (likely(pkt_len >= skb->len))
+ return;
+
+ tail_padding_csum(skb, pkt_len, stats);
+}
+
static inline void mlx5e_handle_csum(struct net_device *netdev,
struct mlx5_cqe64 *cqe,
struct mlx5e_rq *rq,
@@ -783,10 +834,8 @@ static inline void mlx5e_handle_csum(str
skb->csum = csum_partial(skb->data + ETH_HLEN,
network_depth - ETH_HLEN,
skb->csum);
- if (unlikely(netdev->features & NETIF_F_RXFCS))
- skb->csum = csum_block_add(skb->csum,
- (__force __wsum)mlx5e_get_fcs(skb),
- skb->len - ETH_FCS_LEN);
+
+ mlx5e_skb_padding_csum(skb, network_depth, proto, stats);
stats->csum_complete++;
return;
}
--- a/drivers/net/ethernet/mellanox/mlx5/core/en_stats.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_stats.c
@@ -58,6 +58,8 @@ static const struct counter_desc sw_stat
{ MLX5E_DECLARE_STAT(struct mlx5e_sw_stats, rx_csum_unnecessary) },
{ MLX5E_DECLARE_STAT(struct mlx5e_sw_stats, rx_csum_none) },
{ MLX5E_DECLARE_STAT(struct mlx5e_sw_stats, rx_csum_complete) },
+ { MLX5E_DECLARE_STAT(struct mlx5e_sw_stats, rx_csum_complete_tail) },
+ { MLX5E_DECLARE_STAT(struct mlx5e_sw_stats, rx_csum_complete_tail_slow) },
{ MLX5E_DECLARE_STAT(struct mlx5e_sw_stats, rx_csum_unnecessary_inner) },
{ MLX5E_DECLARE_STAT(struct mlx5e_sw_stats, rx_xdp_drop) },
{ MLX5E_DECLARE_STAT(struct mlx5e_sw_stats, rx_xdp_redirect) },
@@ -149,6 +151,8 @@ void mlx5e_grp_sw_update_stats(struct ml
s->rx_removed_vlan_packets += rq_stats->removed_vlan_packets;
s->rx_csum_none += rq_stats->csum_none;
s->rx_csum_complete += rq_stats->csum_complete;
+ s->rx_csum_complete_tail += rq_stats->csum_complete_tail;
+ s->rx_csum_complete_tail_slow += rq_stats->csum_complete_tail_slow;
s->rx_csum_unnecessary += rq_stats->csum_unnecessary;
s->rx_csum_unnecessary_inner += rq_stats->csum_unnecessary_inner;
s->rx_xdp_drop += rq_stats->xdp_drop;
@@ -1139,6 +1143,8 @@ static const struct counter_desc rq_stat
{ MLX5E_DECLARE_RX_STAT(struct mlx5e_rq_stats, packets) },
{ MLX5E_DECLARE_RX_STAT(struct mlx5e_rq_stats, bytes) },
{ MLX5E_DECLARE_RX_STAT(struct mlx5e_rq_stats, csum_complete) },
+ { MLX5E_DECLARE_RX_STAT(struct mlx5e_rq_stats, csum_complete_tail) },
+ { MLX5E_DECLARE_RX_STAT(struct mlx5e_rq_stats, csum_complete_tail_slow) },
{ MLX5E_DECLARE_RX_STAT(struct mlx5e_rq_stats, csum_unnecessary) },
{ MLX5E_DECLARE_RX_STAT(struct mlx5e_rq_stats, csum_unnecessary_inner) },
{ MLX5E_DECLARE_RX_STAT(struct mlx5e_rq_stats, csum_none) },
--- a/drivers/net/ethernet/mellanox/mlx5/core/en_stats.h
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_stats.h
@@ -71,6 +71,8 @@ struct mlx5e_sw_stats {
u64 rx_csum_unnecessary;
u64 rx_csum_none;
u64 rx_csum_complete;
+ u64 rx_csum_complete_tail;
+ u64 rx_csum_complete_tail_slow;
u64 rx_csum_unnecessary_inner;
u64 rx_xdp_drop;
u64 rx_xdp_redirect;
@@ -180,6 +182,8 @@ struct mlx5e_rq_stats {
u64 packets;
u64 bytes;
u64 csum_complete;
+ u64 csum_complete_tail;
+ u64 csum_complete_tail_slow;
u64 csum_unnecessary;
u64 csum_unnecessary_inner;
u64 csum_none;
From: Saeed Mahameed <[email protected]>
[ Upstream commit 0318a7b7fcad9765931146efa7ca3a034194737c ]
In the two places is_last_ethertype_ip is being called, the caller will
be looking inside the ip header, to be safe, add ip{4,6} header sanity
check. And return true only on valid ip headers, i.e: the whole header
is contained in the linear part of the skb.
Note: Such situation is very rare and hard to reproduce, since mlx5e
allocates a large enough headroom to contain the largest header one can
imagine.
Fixes: fe1dc069990c ("net/mlx5e: don't set CHECKSUM_COMPLETE on SCTP packets")
Reported-by: Cong Wang <[email protected]>
Reviewed-by: Tariq Toukan <[email protected]>
Signed-off-by: Saeed Mahameed <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/mellanox/mlx5/core/en_rx.c | 9 ++++++++-
1 file changed, 8 insertions(+), 1 deletion(-)
--- a/drivers/net/ethernet/mellanox/mlx5/core/en_rx.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_rx.c
@@ -694,7 +694,14 @@ static inline bool is_last_ethertype_ip(
{
*proto = ((struct ethhdr *)skb->data)->h_proto;
*proto = __vlan_get_protocol(skb, *proto, network_depth);
- return (*proto == htons(ETH_P_IP) || *proto == htons(ETH_P_IPV6));
+
+ if (*proto == htons(ETH_P_IP))
+ return pskb_may_pull(skb, *network_depth + sizeof(struct iphdr));
+
+ if (*proto == htons(ETH_P_IPV6))
+ return pskb_may_pull(skb, *network_depth + sizeof(struct ipv6hdr));
+
+ return false;
}
static inline void mlx5e_enable_ecn(struct mlx5e_rq *rq, struct sk_buff *skb)
From: Emmanuel Grumbach <[email protected]>
commit 65c3b582ecab7a403efdf08babbf87fdbe27369c upstream.
Probe responses were sent to the multicast station while
they should be routed to the broadcast station.
This has no negative effect since the frame was still
routed to the right queue, but it looked very fishy
to send a frame to a (queue, station) tuple where
'queue' is not mapped to 'station'.
Fixes: 7c305de2b954 ("iwlwifi: mvm: Direct multicast frames to the correct station")
Signed-off-by: Emmanuel Grumbach <[email protected]>
Signed-off-by: Luca Coelho <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/wireless/intel/iwlwifi/mvm/tx.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/net/wireless/intel/iwlwifi/mvm/tx.c
+++ b/drivers/net/wireless/intel/iwlwifi/mvm/tx.c
@@ -671,7 +671,7 @@ int iwl_mvm_tx_skb_non_sta(struct iwl_mv
if (info.control.vif->type == NL80211_IFTYPE_P2P_DEVICE ||
info.control.vif->type == NL80211_IFTYPE_AP ||
info.control.vif->type == NL80211_IFTYPE_ADHOC) {
- if (info.control.vif->type == NL80211_IFTYPE_P2P_DEVICE)
+ if (!ieee80211_is_data(hdr->frame_control))
sta_id = mvmvif->bcast_sta.sta_id;
else
sta_id = mvmvif->mcast_sta.sta_id;
From: Marco Felsch <[email protected]>
commit 2d29bcc8c237874795175b2930fa9a45a115175a upstream.
The function only consists of a single switch case block without a
default case. Unsupported control requests are indicated by the -EINVAL
return code trough the last return statement at the end of the function. So
exiting just the switch case block returns the -EINVAL error code but the
hue control is supported and a zero should be returned instead.
Replace the break by a 'return 0' to fix this behaviour.
Fixes: d183e4efcae8 ("[media] v4l: tvp5150: Add missing break in set
control handler")
Signed-off-by: Marco Felsch <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/media/i2c/tvp5150.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/media/i2c/tvp5150.c
+++ b/drivers/media/i2c/tvp5150.c
@@ -828,7 +828,7 @@ static int tvp5150_s_ctrl(struct v4l2_ct
return 0;
case V4L2_CID_HUE:
tvp5150_write(sd, TVP5150_HUE_CTL, ctrl->val);
- break;
+ return 0;
case V4L2_CID_TEST_PATTERN:
decoder->enable = ctrl->val ? false : true;
tvp5150_selmux(sd);
From: Naftali Goldstein <[email protected]>
commit 2859de7637b541dc7191f4d3fce4a1adba80fb3e upstream.
As with the non-offloaded rs case, during assoc on the ap side the phy
context is set to 20MHz until authorization of a client that supports
wider channel-widths. Support this by sending the initial
tlc_config_cmd with max supported channel width of 20MHz until
authorization succeeds.
Fixes: 6b7a5aea71b3 ("iwlwifi: mvm: always init rs with 20mhz bandwidth rates")
Signed-off-by: Naftali Goldstein <[email protected]>
Signed-off-by: Luca Coelho <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/wireless/intel/iwlwifi/mvm/rs-fw.c | 5 +++--
drivers/net/wireless/intel/iwlwifi/mvm/rs.c | 2 +-
drivers/net/wireless/intel/iwlwifi/mvm/rs.h | 2 +-
3 files changed, 5 insertions(+), 4 deletions(-)
--- a/drivers/net/wireless/intel/iwlwifi/mvm/rs-fw.c
+++ b/drivers/net/wireless/intel/iwlwifi/mvm/rs-fw.c
@@ -315,7 +315,7 @@ out:
}
void rs_fw_rate_init(struct iwl_mvm *mvm, struct ieee80211_sta *sta,
- enum nl80211_band band)
+ enum nl80211_band band, bool update)
{
struct ieee80211_hw *hw = mvm->hw;
struct iwl_mvm_sta *mvmsta = iwl_mvm_sta_from_mac80211(sta);
@@ -324,7 +324,8 @@ void rs_fw_rate_init(struct iwl_mvm *mvm
struct ieee80211_supported_band *sband;
struct iwl_tlc_config_cmd cfg_cmd = {
.sta_id = mvmsta->sta_id,
- .max_ch_width = rs_fw_bw_from_sta_bw(sta),
+ .max_ch_width = update ?
+ rs_fw_bw_from_sta_bw(sta) : RATE_MCS_CHAN_WIDTH_20,
.flags = cpu_to_le16(rs_fw_set_config_flags(mvm, sta)),
.chains = rs_fw_set_active_chains(iwl_mvm_get_valid_tx_ant(mvm)),
.max_mpdu_len = cpu_to_le16(sta->max_amsdu_len),
--- a/drivers/net/wireless/intel/iwlwifi/mvm/rs.c
+++ b/drivers/net/wireless/intel/iwlwifi/mvm/rs.c
@@ -4113,7 +4113,7 @@ void iwl_mvm_rs_rate_init(struct iwl_mvm
enum nl80211_band band, bool update)
{
if (iwl_mvm_has_tlc_offload(mvm))
- rs_fw_rate_init(mvm, sta, band);
+ rs_fw_rate_init(mvm, sta, band, update);
else
rs_drv_rate_init(mvm, sta, band, update);
}
--- a/drivers/net/wireless/intel/iwlwifi/mvm/rs.h
+++ b/drivers/net/wireless/intel/iwlwifi/mvm/rs.h
@@ -461,7 +461,7 @@ void rs_remove_sta_debugfs(void *mvm, vo
void iwl_mvm_rs_add_sta(struct iwl_mvm *mvm, struct iwl_mvm_sta *mvmsta);
void rs_fw_rate_init(struct iwl_mvm *mvm, struct ieee80211_sta *sta,
- enum nl80211_band band);
+ enum nl80211_band band, bool update);
int rs_fw_tx_protection(struct iwl_mvm *mvm, struct iwl_mvm_sta *mvmsta,
bool enable);
void iwl_mvm_tlc_update_notif(struct iwl_mvm *mvm,
From: Dexuan Cui <[email protected]>
[ Upstream commit 533ca1feed98b0bf024779a14760694c7cb4d431 ]
The slot must be removed before the pci_dev is removed, otherwise a panic
can happen due to use-after-free.
Fixes: 15becc2b56c6 ("PCI: hv: Add hv_pci_remove_slots() when we unload the driver")
Signed-off-by: Dexuan Cui <[email protected]>
Signed-off-by: Lorenzo Pieralisi <[email protected]>
Cc: [email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/pci/controller/pci-hyperv.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/pci/controller/pci-hyperv.c b/drivers/pci/controller/pci-hyperv.c
index 5dadc964ad3b4..5c28498466415 100644
--- a/drivers/pci/controller/pci-hyperv.c
+++ b/drivers/pci/controller/pci-hyperv.c
@@ -2706,8 +2706,8 @@ static int hv_pci_remove(struct hv_device *hdev)
/* Remove the bus from PCI's point of view. */
pci_lock_rescan_remove();
pci_stop_root_bus(hbus->pci_bus);
- pci_remove_root_bus(hbus->pci_bus);
hv_pci_remove_slots(hbus);
+ pci_remove_root_bus(hbus->pci_bus);
pci_unlock_rescan_remove();
hbus->state = hv_pcibus_removed;
}
--
2.20.1
From: Surbhi Palande <[email protected]>
[ Upstream commit 1166c1f2f69117ad254189ca781287afa6e550b6 ]
As a part of the sanity checking while mounting, distinct segment number
assignment to data and node segments is verified. Fixing a small bug in
this verification between node and data segments. We need to check all
the data segments with all the node segments.
Fixes: 042be0f849e5f ("f2fs: fix to do sanity check with current segment number")
Signed-off-by: Surbhi Palande <[email protected]>
Reviewed-by: Chao Yu <[email protected]>
Signed-off-by: Jaegeuk Kim <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/f2fs/super.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/fs/f2fs/super.c b/fs/f2fs/super.c
index 1871031e2d5eb..e9ab4b39d4eef 100644
--- a/fs/f2fs/super.c
+++ b/fs/f2fs/super.c
@@ -2413,11 +2413,11 @@ int f2fs_sanity_check_ckpt(struct f2fs_sb_info *sbi)
}
}
for (i = 0; i < NR_CURSEG_NODE_TYPE; i++) {
- for (j = i; j < NR_CURSEG_DATA_TYPE; j++) {
+ for (j = 0; j < NR_CURSEG_DATA_TYPE; j++) {
if (le32_to_cpu(ckpt->cur_node_segno[i]) ==
le32_to_cpu(ckpt->cur_data_segno[j])) {
f2fs_msg(sbi->sb, KERN_ERR,
- "Data segment (%u) and Data segment (%u)"
+ "Node segment (%u) and Data segment (%u)"
" has the same segno: %u", i, j,
le32_to_cpu(ckpt->cur_node_segno[i]));
return 1;
--
2.20.1
From: Steven Price <[email protected]>
[ Upstream commit 5d59aa8f9ce972b472201aed86e904bb75879ff0 ]
Since commit 54c7a8916a88 ("initramfs: free initrd memory if opening
/initrd.image fails"), the kernel has unconditionally attempted to free
the initrd even if it doesn't exist.
In the non-existent case this causes a boot-time splat if
CONFIG_DEBUG_VIRTUAL is enabled due to a call to virt_to_phys() with a
NULL address.
Instead we should check that the initrd actually exists and only attempt
to free it if it does.
Link: http://lkml.kernel.org/r/[email protected]
Fixes: 54c7a8916a88 ("initramfs: free initrd memory if opening /initrd.image fails")
Signed-off-by: Steven Price <[email protected]>
Reported-by: Mark Rutland <[email protected]>
Tested-by: Mark Rutland <[email protected]>
Reviewed-by: Mike Rapoport <[email protected]>
Cc: Christoph Hellwig <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
init/initramfs.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/init/initramfs.c b/init/initramfs.c
index cd5fb00fcb549..dab8d63459f63 100644
--- a/init/initramfs.c
+++ b/init/initramfs.c
@@ -524,7 +524,7 @@ static void __init free_initrd(void)
unsigned long crashk_start = (unsigned long)__va(crashk_res.start);
unsigned long crashk_end = (unsigned long)__va(crashk_res.end);
#endif
- if (do_retain_initrd)
+ if (do_retain_initrd || !initrd_start)
goto skip;
#ifdef CONFIG_KEXEC_CORE
--
2.20.1
From: Jianchao Wang <[email protected]>
[ Upstream commit 5b202853ffbc54b29f23c4b1b5f3948efab489a2 ]
blk_mq_realloc_hw_ctxs could be invoked during update hw queues.
At the momemt, IO is blocked. Change the gfp flags from GFP_KERNEL
to GFP_NOIO to avoid forever hang during memory allocation in
blk_mq_realloc_hw_ctxs.
Signed-off-by: Jianchao Wang <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
block/blk-core.c | 2 +-
block/blk-flush.c | 6 +++---
block/blk-mq.c | 17 ++++++++++-------
block/blk.h | 2 +-
4 files changed, 15 insertions(+), 12 deletions(-)
diff --git a/block/blk-core.c b/block/blk-core.c
index af635f878f966..074ae9376189b 100644
--- a/block/blk-core.c
+++ b/block/blk-core.c
@@ -1165,7 +1165,7 @@ int blk_init_allocated_queue(struct request_queue *q)
{
WARN_ON_ONCE(q->mq_ops);
- q->fq = blk_alloc_flush_queue(q, NUMA_NO_NODE, q->cmd_size);
+ q->fq = blk_alloc_flush_queue(q, NUMA_NO_NODE, q->cmd_size, GFP_KERNEL);
if (!q->fq)
return -ENOMEM;
diff --git a/block/blk-flush.c b/block/blk-flush.c
index 76487948a27fa..87fc49daa2b49 100644
--- a/block/blk-flush.c
+++ b/block/blk-flush.c
@@ -566,12 +566,12 @@ int blkdev_issue_flush(struct block_device *bdev, gfp_t gfp_mask,
EXPORT_SYMBOL(blkdev_issue_flush);
struct blk_flush_queue *blk_alloc_flush_queue(struct request_queue *q,
- int node, int cmd_size)
+ int node, int cmd_size, gfp_t flags)
{
struct blk_flush_queue *fq;
int rq_sz = sizeof(struct request);
- fq = kzalloc_node(sizeof(*fq), GFP_KERNEL, node);
+ fq = kzalloc_node(sizeof(*fq), flags, node);
if (!fq)
goto fail;
@@ -579,7 +579,7 @@ struct blk_flush_queue *blk_alloc_flush_queue(struct request_queue *q,
spin_lock_init(&fq->mq_flush_lock);
rq_sz = round_up(rq_sz + cmd_size, cache_line_size());
- fq->flush_rq = kzalloc_node(rq_sz, GFP_KERNEL, node);
+ fq->flush_rq = kzalloc_node(rq_sz, flags, node);
if (!fq->flush_rq)
goto fail_rq;
diff --git a/block/blk-mq.c b/block/blk-mq.c
index 455fda99255a4..9dfafee65bce2 100644
--- a/block/blk-mq.c
+++ b/block/blk-mq.c
@@ -2198,12 +2198,12 @@ static int blk_mq_init_hctx(struct request_queue *q,
* runtime
*/
hctx->ctxs = kmalloc_array_node(nr_cpu_ids, sizeof(void *),
- GFP_KERNEL, node);
+ GFP_NOIO | __GFP_NOWARN | __GFP_NORETRY, node);
if (!hctx->ctxs)
goto unregister_cpu_notifier;
- if (sbitmap_init_node(&hctx->ctx_map, nr_cpu_ids, ilog2(8), GFP_KERNEL,
- node))
+ if (sbitmap_init_node(&hctx->ctx_map, nr_cpu_ids, ilog2(8),
+ GFP_NOIO | __GFP_NOWARN | __GFP_NORETRY, node))
goto free_ctxs;
hctx->nr_ctx = 0;
@@ -2216,7 +2216,8 @@ static int blk_mq_init_hctx(struct request_queue *q,
set->ops->init_hctx(hctx, set->driver_data, hctx_idx))
goto free_bitmap;
- hctx->fq = blk_alloc_flush_queue(q, hctx->numa_node, set->cmd_size);
+ hctx->fq = blk_alloc_flush_queue(q, hctx->numa_node, set->cmd_size,
+ GFP_NOIO | __GFP_NOWARN | __GFP_NORETRY);
if (!hctx->fq)
goto exit_hctx;
@@ -2530,12 +2531,14 @@ static void blk_mq_realloc_hw_ctxs(struct blk_mq_tag_set *set,
node = blk_mq_hw_queue_to_node(q->mq_map, i);
hctxs[i] = kzalloc_node(blk_mq_hw_ctx_size(set),
- GFP_KERNEL, node);
+ GFP_NOIO | __GFP_NOWARN | __GFP_NORETRY,
+ node);
if (!hctxs[i])
break;
- if (!zalloc_cpumask_var_node(&hctxs[i]->cpumask, GFP_KERNEL,
- node)) {
+ if (!zalloc_cpumask_var_node(&hctxs[i]->cpumask,
+ GFP_NOIO | __GFP_NOWARN | __GFP_NORETRY,
+ node)) {
kfree(hctxs[i]);
hctxs[i] = NULL;
break;
diff --git a/block/blk.h b/block/blk.h
index 977d4b5d968d5..11e4ca2f2cd46 100644
--- a/block/blk.h
+++ b/block/blk.h
@@ -124,7 +124,7 @@ static inline void __blk_get_queue(struct request_queue *q)
}
struct blk_flush_queue *blk_alloc_flush_queue(struct request_queue *q,
- int node, int cmd_size);
+ int node, int cmd_size, gfp_t flags);
void blk_free_flush_queue(struct blk_flush_queue *q);
int blk_init_rl(struct request_list *rl, struct request_queue *q,
--
2.20.1
From: zhengbin <[email protected]>
[ Upstream commit e26cc08265dda37d2acc8394604f220ef412299d ]
blk_exit_queue will free elevator_data, while blk_mq_requeue_work
will access it. Move cancel of requeue_work to the front of
blk_exit_queue to avoid use-after-free.
blk_exit_queue blk_mq_requeue_work
__elevator_exit blk_mq_run_hw_queues
blk_mq_exit_sched blk_mq_run_hw_queue
dd_exit_queue blk_mq_hctx_has_pending
kfree(elevator_data) blk_mq_sched_has_work
dd_has_work
Fixes: fbc2a15e3433 ("blk-mq: move cancel of requeue_work into blk_mq_release")
Cc: [email protected]
Reviewed-by: Ming Lei <[email protected]>
Signed-off-by: zhengbin <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
block/blk-mq.c | 2 --
block/blk-sysfs.c | 3 +++
2 files changed, 3 insertions(+), 2 deletions(-)
diff --git a/block/blk-mq.c b/block/blk-mq.c
index 9dfafee65bce2..7ea85ec52026e 100644
--- a/block/blk-mq.c
+++ b/block/blk-mq.c
@@ -2461,8 +2461,6 @@ void blk_mq_release(struct request_queue *q)
struct blk_mq_hw_ctx *hctx;
unsigned int i;
- cancel_delayed_work_sync(&q->requeue_work);
-
/* hctx kobj stays in hctx */
queue_for_each_hw_ctx(q, hctx, i) {
if (!hctx)
diff --git a/block/blk-sysfs.c b/block/blk-sysfs.c
index 3772671cf2bc5..bab47a17b96f4 100644
--- a/block/blk-sysfs.c
+++ b/block/blk-sysfs.c
@@ -836,6 +836,9 @@ static void __blk_release_queue(struct work_struct *work)
blk_free_queue_stats(q->stats);
+ if (q->mq_ops)
+ cancel_delayed_work_sync(&q->requeue_work);
+
blk_exit_rl(q, &q->root_rl);
if (q->queue_tags)
--
2.20.1
From: Chao Yu <[email protected]>
[ Upstream commit a37d0862d17411edb67677a580a6f505ec2225f6 ]
As Pavel Machek reported:
"We normally use -EUCLEAN to signal filesystem corruption. Plus, it is
good idea to report it to the syslog and mark filesystem as "needing
fsck" if filesystem can do that."
Still we need improve the original patch with:
- use unlikely keyword
- add message print
- return EUCLEAN
However, after rethink this patch, I don't think we should add such
condition check here as below reasons:
- We have already checked the field in f2fs_sanity_check_ckpt(),
- If there is fs corrupt or security vulnerability, there is nothing
to guarantee the field is integrated after the check, unless we do
the check before each of its use, however no filesystem does that.
- We only have similar check for bitmap, which was added due to there
is bitmap corruption happened on f2fs' runtime in product.
- There are so many key fields in SB/CP/NAT did have such check
after f2fs_sanity_check_{sb,cp,..}.
So I propose to revert this unneeded check.
This reverts commit 56f3ce675103e3fb9e631cfb4131fc768bc23e9a.
Signed-off-by: Chao Yu <[email protected]>
Signed-off-by: Jaegeuk Kim <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/f2fs/segment.c | 5 -----
1 file changed, 5 deletions(-)
diff --git a/fs/f2fs/segment.c b/fs/f2fs/segment.c
index 92f72bb5aff43..8fc3edb6760c2 100644
--- a/fs/f2fs/segment.c
+++ b/fs/f2fs/segment.c
@@ -3261,11 +3261,6 @@ static int read_compacted_summaries(struct f2fs_sb_info *sbi)
seg_i = CURSEG_I(sbi, i);
segno = le32_to_cpu(ckpt->cur_data_segno[i]);
blk_off = le16_to_cpu(ckpt->cur_data_blkoff[i]);
- if (blk_off > ENTRIES_IN_SUM) {
- f2fs_bug_on(sbi, 1);
- f2fs_put_page(page, 1);
- return -EFAULT;
- }
seg_i->next_segno = segno;
reset_curseg(sbi, i, 0);
seg_i->alloc_type = ckpt->alloc_type[i];
--
2.20.1
From: David Lechner <[email protected]>
[ Upstream commit 87a2b65fc855e6be50f791c2ebbb492541896827 ]
This adds rate limiting to the message that is printed when reading a
power supply property via sysfs returns an error. This will prevent
userspace applications from unintentionally dDOSing the system by
continuously reading a property that returns an error.
Signed-off-by: David Lechner <[email protected]>
Signed-off-by: Sebastian Reichel <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/power/supply/power_supply_sysfs.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/power/supply/power_supply_sysfs.c b/drivers/power/supply/power_supply_sysfs.c
index 5a2757a7f4088..5358a80d854f9 100644
--- a/drivers/power/supply/power_supply_sysfs.c
+++ b/drivers/power/supply/power_supply_sysfs.c
@@ -131,7 +131,8 @@ static ssize_t power_supply_show_property(struct device *dev,
dev_dbg(dev, "driver has no data for `%s' property\n",
attr->attr.name);
else if (ret != -ENODEV && ret != -EAGAIN)
- dev_err(dev, "driver failed to report `%s' property: %zd\n",
+ dev_err_ratelimited(dev,
+ "driver failed to report `%s' property: %zd\n",
attr->attr.name, ret);
return ret;
}
--
2.20.1
From: Quinn Tran <[email protected]>
[ Upstream commit e112761a4f1dcbe9fb9f43f46de7be69d6963b0d ]
Turn off IOCB timeout timer on IOCB completion instead of turning it off in a
deferred task. This prevent false alarm if the deferred task is stalled out.
Signed-off-by: Quinn Tran <[email protected]>
Signed-off-by: Himanshu Madhani <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/scsi/qla2xxx/qla_gs.c | 8 +++++---
1 file changed, 5 insertions(+), 3 deletions(-)
diff --git a/drivers/scsi/qla2xxx/qla_gs.c b/drivers/scsi/qla2xxx/qla_gs.c
index fc08e46a93ca9..98d936f18b65e 100644
--- a/drivers/scsi/qla2xxx/qla_gs.c
+++ b/drivers/scsi/qla2xxx/qla_gs.c
@@ -4225,10 +4225,13 @@ static void qla2x00_async_gpnft_gnnft_sp_done(void *s, int res)
return;
}
- if (cmd == GPN_FT_CMD)
+ if (cmd == GPN_FT_CMD) {
+ del_timer(&sp->u.iocb_cmd.timer);
e = qla2x00_alloc_work(vha, QLA_EVT_GPNFT_DONE);
- else
+ } else {
e = qla2x00_alloc_work(vha, QLA_EVT_GNNFT_DONE);
+ }
+
if (!e) {
/* please ignore kernel warning. Otherwise, we have mem leak. */
if (sp->u.iocb_cmd.u.ctarg.req) {
@@ -4357,7 +4360,6 @@ void qla24xx_async_gpnft_done(scsi_qla_host_t *vha, srb_t *sp)
{
ql_dbg(ql_dbg_disc, vha, 0xffff,
"%s enter\n", __func__);
- del_timer(&sp->u.iocb_cmd.timer);
qla24xx_async_gnnft(vha, sp, sp->gen2);
}
--
2.20.1
From: Waiman Long <[email protected]>
[ Upstream commit 71492580571467fb7177aade19c18ce7486267f5 ]
Tetsuo Handa had reported he saw an incorrect "downgrading a read lock"
warning right after a previous lockdep warning. It is likely that the
previous warning turned off lock debugging causing the lockdep to have
inconsistency states leading to the lock downgrade warning.
Fix that by add a check for debug_locks at the beginning of
__lock_downgrade().
Debugged-by: Tetsuo Handa <[email protected]>
Reported-by: Tetsuo Handa <[email protected]>
Reported-by: [email protected]
Signed-off-by: Waiman Long <[email protected]>
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Cc: Andrew Morton <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Paul E. McKenney <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Will Deacon <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Ingo Molnar <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
kernel/locking/lockdep.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/kernel/locking/lockdep.c b/kernel/locking/lockdep.c
index 68ba411a90075..1c8e5d186ad64 100644
--- a/kernel/locking/lockdep.c
+++ b/kernel/locking/lockdep.c
@@ -3608,6 +3608,9 @@ static int __lock_downgrade(struct lockdep_map *lock, unsigned long ip)
unsigned int depth;
int i;
+ if (unlikely(!debug_locks))
+ return 0;
+
depth = curr->lockdep_depth;
/*
* This function is about (re)setting the class of a held lock,
--
2.20.1
From: Alan Stern <[email protected]>
commit 98375b86c79137416e9fd354177b85e768c16e56 upstream.
The syzbot fuzzer provoked a general protection fault in the
hid-prodikeys driver:
kasan: CONFIG_KASAN_INLINE enabled
kasan: GPF could be caused by NULL-ptr deref or user memory access
general protection fault: 0000 [#1] SMP KASAN
CPU: 0 PID: 12 Comm: kworker/0:1 Not tainted 5.3.0-rc5+ #28
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS
Google 01/01/2011
Workqueue: usb_hub_wq hub_event
RIP: 0010:pcmidi_submit_output_report drivers/hid/hid-prodikeys.c:300 [inline]
RIP: 0010:pcmidi_set_operational drivers/hid/hid-prodikeys.c:558 [inline]
RIP: 0010:pcmidi_snd_initialise drivers/hid/hid-prodikeys.c:686 [inline]
RIP: 0010:pk_probe+0xb51/0xfd0 drivers/hid/hid-prodikeys.c:836
Code: 0f 85 50 04 00 00 48 8b 04 24 4c 89 7d 10 48 8b 58 08 e8 b2 53 e4 fc
48 8b 54 24 20 48 b8 00 00 00 00 00 fc ff df 48 c1 ea 03 <80> 3c 02 00 0f
85 13 04 00 00 48 ba 00 00 00 00 00 fc ff df 49 8b
The problem is caused by the fact that pcmidi_get_output_report() will
return an error if the HID device doesn't provide the right sort of
output report, but pcmidi_set_operational() doesn't bother to check
the return code and assumes the function call always succeeds.
This patch adds the missing check and aborts the probe operation if
necessary.
Reported-and-tested-by: [email protected]
Signed-off-by: Alan Stern <[email protected]>
CC: <[email protected]>
Signed-off-by: Jiri Kosina <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/hid/hid-prodikeys.c | 12 ++++++++++--
1 file changed, 10 insertions(+), 2 deletions(-)
--- a/drivers/hid/hid-prodikeys.c
+++ b/drivers/hid/hid-prodikeys.c
@@ -555,10 +555,14 @@ static void pcmidi_setup_extra_keys(
static int pcmidi_set_operational(struct pcmidi_snd *pm)
{
+ int rc;
+
if (pm->ifnum != 1)
return 0; /* only set up ONCE for interace 1 */
- pcmidi_get_output_report(pm);
+ rc = pcmidi_get_output_report(pm);
+ if (rc < 0)
+ return rc;
pcmidi_submit_output_report(pm, 0xc1);
return 0;
}
@@ -687,7 +691,11 @@ static int pcmidi_snd_initialise(struct
spin_lock_init(&pm->rawmidi_in_lock);
init_sustain_timers(pm);
- pcmidi_set_operational(pm);
+ err = pcmidi_set_operational(pm);
+ if (err < 0) {
+ pk_error("failed to find output report\n");
+ goto fail_register;
+ }
/* register it */
err = snd_card_register(card);
From: Lorenz Bauer <[email protected]>
[ Upstream commit 86edaed379632e216a97e6bcef9f498b64522d50 ]
Commit c3494801cd17 ("bpf: check pending signals while
verifying programs") makes it possible for the BPF_PROG_LOAD
to fail with EAGAIN. Retry unconditionally in this case.
Fixes: c3494801cd17 ("bpf: check pending signals while verifying programs")
Signed-off-by: Lorenz Bauer <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
tools/lib/bpf/bpf.c | 17 ++++++++++++++---
1 file changed, 14 insertions(+), 3 deletions(-)
diff --git a/tools/lib/bpf/bpf.c b/tools/lib/bpf/bpf.c
index dd0b68d1f4be0..482025b728399 100644
--- a/tools/lib/bpf/bpf.c
+++ b/tools/lib/bpf/bpf.c
@@ -75,6 +75,17 @@ static inline int sys_bpf(enum bpf_cmd cmd, union bpf_attr *attr,
return syscall(__NR_bpf, cmd, attr, size);
}
+static inline int sys_bpf_prog_load(union bpf_attr *attr, unsigned int size)
+{
+ int fd;
+
+ do {
+ fd = sys_bpf(BPF_PROG_LOAD, attr, size);
+ } while (fd < 0 && errno == EAGAIN);
+
+ return fd;
+}
+
int bpf_create_map_xattr(const struct bpf_create_map_attr *create_attr)
{
__u32 name_len = create_attr->name ? strlen(create_attr->name) : 0;
@@ -218,7 +229,7 @@ int bpf_load_program_xattr(const struct bpf_load_program_attr *load_attr,
memcpy(attr.prog_name, load_attr->name,
min(name_len, BPF_OBJ_NAME_LEN - 1));
- fd = sys_bpf(BPF_PROG_LOAD, &attr, sizeof(attr));
+ fd = sys_bpf_prog_load(&attr, sizeof(attr));
if (fd >= 0 || !log_buf || !log_buf_sz)
return fd;
@@ -227,7 +238,7 @@ int bpf_load_program_xattr(const struct bpf_load_program_attr *load_attr,
attr.log_size = log_buf_sz;
attr.log_level = 1;
log_buf[0] = 0;
- return sys_bpf(BPF_PROG_LOAD, &attr, sizeof(attr));
+ return sys_bpf_prog_load(&attr, sizeof(attr));
}
int bpf_load_program(enum bpf_prog_type type, const struct bpf_insn *insns,
@@ -268,7 +279,7 @@ int bpf_verify_program(enum bpf_prog_type type, const struct bpf_insn *insns,
attr.kern_version = kern_version;
attr.prog_flags = strict_alignment ? BPF_F_STRICT_ALIGNMENT : 0;
- return sys_bpf(BPF_PROG_LOAD, &attr, sizeof(attr));
+ return sys_bpf_prog_load(&attr, sizeof(attr));
}
int bpf_map_update_elem(int fd, const void *key, const void *value,
--
2.20.1
From: Shirish S <[email protected]>
[ Upstream commit 00fedbe629bfc0a51c07b6e665265ce31d8b6f3c ]
This reverts commit dbd8299c32f6f413f6cfe322fe0308f3cfc577e8.
Reason for revert:
This patch sends msg PPSMC_MSG_DisableLowMemoryPstate(0x002e)
in wrong of sequence to SMU which is before PPSMC_MSG_UVDPowerON (0x0008).
This leads to SMU failing to service the request as it is
dependent on UVD to be powered ON, since it accesses UVD
registers.
This msg should ideally be sent only when the UVD is about to decode
a 4k video.
Signed-off-by: Shirish S <[email protected]>
Signed-off-by: suresh guttula <[email protected]>
Reviewed-by: Alex Deucher <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/amd/powerplay/hwmgr/smu8_hwmgr.c | 5 +----
1 file changed, 1 insertion(+), 4 deletions(-)
diff --git a/drivers/gpu/drm/amd/powerplay/hwmgr/smu8_hwmgr.c b/drivers/gpu/drm/amd/powerplay/hwmgr/smu8_hwmgr.c
index c9a15baf2c10f..0adfc5392cd37 100644
--- a/drivers/gpu/drm/amd/powerplay/hwmgr/smu8_hwmgr.c
+++ b/drivers/gpu/drm/amd/powerplay/hwmgr/smu8_hwmgr.c
@@ -1222,17 +1222,14 @@ static int smu8_dpm_force_dpm_level(struct pp_hwmgr *hwmgr,
static int smu8_dpm_powerdown_uvd(struct pp_hwmgr *hwmgr)
{
- if (PP_CAP(PHM_PlatformCaps_UVDPowerGating)) {
- smu8_nbdpm_pstate_enable_disable(hwmgr, true, true);
+ if (PP_CAP(PHM_PlatformCaps_UVDPowerGating))
return smum_send_msg_to_smc(hwmgr, PPSMC_MSG_UVDPowerOFF);
- }
return 0;
}
static int smu8_dpm_powerup_uvd(struct pp_hwmgr *hwmgr)
{
if (PP_CAP(PHM_PlatformCaps_UVDPowerGating)) {
- smu8_nbdpm_pstate_enable_disable(hwmgr, false, true);
return smum_send_msg_to_smc_with_parameter(
hwmgr,
PPSMC_MSG_UVDPowerON,
--
2.20.1
From: Michal Suchanek <[email protected]>
[ Upstream commit c8dc55956b09b53ccffceb6e3146981210e27821 ]
Commit 1c2977c09499 ("net/ibmvnic: free reset work of removed device from queue")
adds a } without corresponding { causing build break.
Fixes: 1c2977c09499 ("net/ibmvnic: free reset work of removed device from queue")
Signed-off-by: Michal Suchanek <[email protected]>
Reviewed-by: Tyrel Datwyler <[email protected]>
Reviewed-by: Juliet Kim <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/ibm/ibmvnic.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/ibm/ibmvnic.c b/drivers/net/ethernet/ibm/ibmvnic.c
index f232943c818bf..aa067a7a72d40 100644
--- a/drivers/net/ethernet/ibm/ibmvnic.c
+++ b/drivers/net/ethernet/ibm/ibmvnic.c
@@ -1999,7 +1999,7 @@ static void __ibmvnic_reset(struct work_struct *work)
rwi = get_next_rwi(adapter);
while (rwi) {
if (adapter->state == VNIC_REMOVING ||
- adapter->state == VNIC_REMOVED)
+ adapter->state == VNIC_REMOVED) {
kfree(rwi);
rc = EBUSY;
break;
--
2.20.1
From: Cong Wang <[email protected]>
[ Upstream commit 8b142a00edcf8422ca48b8de88d286efb500cb53 ]
At least sch_red and sch_tbf don't implement ->tcf_block()
while still have a non-zero tc "class".
Instead of adding nop implementations to each of such qdisc's,
we can just relax the check of cops->tcf_block() in
tc_bind_tclass(). They don't support TC filter anyway.
Reported-by: [email protected]
Cc: Jamal Hadi Salim <[email protected]>
Cc: Jiri Pirko <[email protected]>
Signed-off-by: Cong Wang <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/sched/sch_api.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/net/sched/sch_api.c b/net/sched/sch_api.c
index be7cd140b2a38..b06cc5e504127 100644
--- a/net/sched/sch_api.c
+++ b/net/sched/sch_api.c
@@ -1831,6 +1831,8 @@ static void tc_bind_tclass(struct Qdisc *q, u32 portid, u32 clid,
cl = cops->find(q, portid);
if (!cl)
return;
+ if (!cops->tcf_block)
+ return;
block = cops->tcf_block(q, cl, NULL);
if (!block)
return;
--
2.20.1
From: Ilia Mirkin <[email protected]>
[ Upstream commit 533f4752407543f488a9118d817b8c504352b6fb ]
Previously center scaling would get scaling applied to it (when it was
only supposed to center the image), and aspect-corrected scaling did not
always correctly pick whether to reduce width or height for a particular
combination of inputs/outputs.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=110660
Signed-off-by: Ilia Mirkin <[email protected]>
Signed-off-by: Ben Skeggs <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/nouveau/dispnv50/head.c | 28 +++++++++++++++++++++----
1 file changed, 24 insertions(+), 4 deletions(-)
diff --git a/drivers/gpu/drm/nouveau/dispnv50/head.c b/drivers/gpu/drm/nouveau/dispnv50/head.c
index d81a99bb2ac31..b041ffb3af270 100644
--- a/drivers/gpu/drm/nouveau/dispnv50/head.c
+++ b/drivers/gpu/drm/nouveau/dispnv50/head.c
@@ -169,14 +169,34 @@ nv50_head_atomic_check_view(struct nv50_head_atom *armh,
*/
switch (mode) {
case DRM_MODE_SCALE_CENTER:
- asyh->view.oW = min((u16)umode->hdisplay, asyh->view.oW);
- asyh->view.oH = min((u16)umode_vdisplay, asyh->view.oH);
- /* fall-through */
+ /* NOTE: This will cause scaling when the input is
+ * larger than the output.
+ */
+ asyh->view.oW = min(asyh->view.iW, asyh->view.oW);
+ asyh->view.oH = min(asyh->view.iH, asyh->view.oH);
+ break;
case DRM_MODE_SCALE_ASPECT:
- if (asyh->view.oH < asyh->view.oW) {
+ /* Determine whether the scaling should be on width or on
+ * height. This is done by comparing the aspect ratios of the
+ * sizes. If the output AR is larger than input AR, that means
+ * we want to change the width (letterboxed on the
+ * left/right), otherwise on the height (letterboxed on the
+ * top/bottom).
+ *
+ * E.g. 4:3 (1.333) AR image displayed on a 16:10 (1.6) AR
+ * screen will have letterboxes on the left/right. However a
+ * 16:9 (1.777) AR image on that same screen will have
+ * letterboxes on the top/bottom.
+ *
+ * inputAR = iW / iH; outputAR = oW / oH
+ * outputAR > inputAR is equivalent to oW * iH > iW * oH
+ */
+ if (asyh->view.oW * asyh->view.iH > asyh->view.iW * asyh->view.oH) {
+ /* Recompute output width, i.e. left/right letterbox */
u32 r = (asyh->view.iW << 19) / asyh->view.iH;
asyh->view.oW = ((asyh->view.oH * r) + (r / 2)) >> 19;
} else {
+ /* Recompute output height, i.e. top/bottom letterbox */
u32 r = (asyh->view.iH << 19) / asyh->view.iW;
asyh->view.oH = ((asyh->view.oW * r) + (r / 2)) >> 19;
}
--
2.20.1
From: Hans de Goede <[email protected]>
[ Upstream commit 4f7f96453b462b3de0fa18d18fe983960bb5ee7f ]
Some machines change the brightness themselves when a brightness hotkey
gets pressed, despite us telling them not to. This causes the brightness to
go two steps up / down when the hotkey is pressed. This is esp. a problem
on older machines with only a few brightness levels.
This commit adds a new hw_changes_brightness quirk which makes
acpi_video_device_notify() only call backlight_force_update(...,
BACKLIGHT_UPDATE_HOTKEY) and not do anything else, notifying userspace
that the brightness was changed and leaving it at that fixing the dual
step problem.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=204077
Reported-by: Kacper Piwiński <[email protected]>
Tested-by: Kacper Piwiński <[email protected]>
Signed-off-by: Hans de Goede <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/acpi/acpi_video.c | 37 +++++++++++++++++++++++++++++++++++++
1 file changed, 37 insertions(+)
diff --git a/drivers/acpi/acpi_video.c b/drivers/acpi/acpi_video.c
index d73afb562ad95..1a23e7aa74df7 100644
--- a/drivers/acpi/acpi_video.c
+++ b/drivers/acpi/acpi_video.c
@@ -73,6 +73,12 @@ module_param(report_key_events, int, 0644);
MODULE_PARM_DESC(report_key_events,
"0: none, 1: output changes, 2: brightness changes, 3: all");
+static int hw_changes_brightness = -1;
+module_param(hw_changes_brightness, int, 0644);
+MODULE_PARM_DESC(hw_changes_brightness,
+ "Set this to 1 on buggy hw which changes the brightness itself when "
+ "a hotkey is pressed: -1: auto, 0: normal 1: hw-changes-brightness");
+
/*
* Whether the struct acpi_video_device_attrib::device_id_scheme bit should be
* assumed even if not actually set.
@@ -418,6 +424,14 @@ static int video_set_report_key_events(const struct dmi_system_id *id)
return 0;
}
+static int video_hw_changes_brightness(
+ const struct dmi_system_id *d)
+{
+ if (hw_changes_brightness == -1)
+ hw_changes_brightness = 1;
+ return 0;
+}
+
static const struct dmi_system_id video_dmi_table[] = {
/*
* Broken _BQC workaround http://bugzilla.kernel.org/show_bug.cgi?id=13121
@@ -542,6 +556,21 @@ static const struct dmi_system_id video_dmi_table[] = {
DMI_MATCH(DMI_PRODUCT_NAME, "Vostro V131"),
},
},
+ /*
+ * Some machines change the brightness themselves when a brightness
+ * hotkey gets pressed, despite us telling them not to. In this case
+ * acpi_video_device_notify() should only call backlight_force_update(
+ * BACKLIGHT_UPDATE_HOTKEY) and not do anything else.
+ */
+ {
+ /* https://bugzilla.kernel.org/show_bug.cgi?id=204077 */
+ .callback = video_hw_changes_brightness,
+ .ident = "Packard Bell EasyNote MZ35",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Packard Bell"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "EasyNote MZ35"),
+ },
+ },
{}
};
@@ -1625,6 +1654,14 @@ static void acpi_video_device_notify(acpi_handle handle, u32 event, void *data)
bus = video_device->video;
input = bus->input;
+ if (hw_changes_brightness > 0) {
+ if (video_device->backlight)
+ backlight_force_update(video_device->backlight,
+ BACKLIGHT_UPDATE_HOTKEY);
+ acpi_notifier_call_chain(device, event, 0);
+ return;
+ }
+
switch (event) {
case ACPI_VIDEO_NOTIFY_CYCLE_BRIGHTNESS: /* Cycle brightness */
brightness_switch_event(video_device, event);
--
2.20.1
From: Marc Zyngier <[email protected]>
[ Upstream commit c9c96e30ecaa0aafa225aa1a5392cb7db17c7a82 ]
When allocating a range of LPIs for a Multi-MSI capable device,
this allocation extended to the closest power of 2.
But on the release path, the interrupts are released one by
one. This results in not releasing the "extra" range, leaking
the its_device. Trying to reprobe the device will then fail.
Fix it by releasing the LPIs the same way we allocate them.
Fixes: 8208d1708b88 ("irqchip/gic-v3-its: Align PCI Multi-MSI allocation on their size")
Reported-by: Jiaxing Luo <[email protected]>
Tested-by: John Garry <[email protected]>
Signed-off-by: Marc Zyngier <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/irqchip/irq-gic-v3-its.c | 9 ++++-----
1 file changed, 4 insertions(+), 5 deletions(-)
diff --git a/drivers/irqchip/irq-gic-v3-its.c b/drivers/irqchip/irq-gic-v3-its.c
index 9ba73e11757d9..e7549a2b1482b 100644
--- a/drivers/irqchip/irq-gic-v3-its.c
+++ b/drivers/irqchip/irq-gic-v3-its.c
@@ -2514,14 +2514,13 @@ static void its_irq_domain_free(struct irq_domain *domain, unsigned int virq,
struct its_node *its = its_dev->its;
int i;
+ bitmap_release_region(its_dev->event_map.lpi_map,
+ its_get_event_id(irq_domain_get_irq_data(domain, virq)),
+ get_count_order(nr_irqs));
+
for (i = 0; i < nr_irqs; i++) {
struct irq_data *data = irq_domain_get_irq_data(domain,
virq + i);
- u32 event = its_get_event_id(data);
-
- /* Mark interrupt index as unused */
- clear_bit(event, its_dev->event_map.lpi_map);
-
/* Nuke the entry in the domain */
irq_domain_reset_irq_data(data);
}
--
2.20.1
From: Takashi Iwai <[email protected]>
commit d2c63b7dfd06788a466d5ec8a850491f084c5fc2 upstream.
It's reported that the garbled sound on HP Envy x360 13z-ag000 (Ryzen
Laptop) is fixed by the same workaround applied to other AMD chips.
Update the driver_data entry for Raven (1022:15e3) to use the newly
introduced preset, AZX_DCAPS_PRESET_AMD_SB. Since it already contains
AZX_DCAPS_PM_RUNTIME, we can drop that bit, too.
Reported-and-tested-by: Dennis Padiernos <[email protected]>
Cc: <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
sound/pci/hda/hda_intel.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
--- a/sound/pci/hda/hda_intel.c
+++ b/sound/pci/hda/hda_intel.c
@@ -2662,8 +2662,7 @@ static const struct pci_device_id azx_id
AZX_DCAPS_PM_RUNTIME },
/* AMD Raven */
{ PCI_DEVICE(0x1022, 0x15e3),
- .driver_data = AZX_DRIVER_GENERIC | AZX_DCAPS_PRESET_ATI_SB |
- AZX_DCAPS_PM_RUNTIME },
+ .driver_data = AZX_DRIVER_GENERIC | AZX_DCAPS_PRESET_AMD_SB },
/* ATI HDMI */
{ PCI_DEVICE(0x1002, 0x0002),
.driver_data = AZX_DRIVER_ATIHDMI_NS | AZX_DCAPS_PRESET_ATI_HDMI_NS },
From: Shih-Yuan Lee (FourDollars) <[email protected]>
commit 7b485d175631be676424aedb8cd2f66d0c93da78 upstream.
The same fixup to enable laptop imic is needed for ASUS M9V with AD1986A
codec like another HP machine.
Signed-off-by: Shih-Yuan Lee (FourDollars) <[email protected]>
Cc: <[email protected]>
Link: https://lore.kernel.org/r/20190920134052.GA8035@localhost
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
sound/pci/hda/patch_analog.c | 1 +
1 file changed, 1 insertion(+)
--- a/sound/pci/hda/patch_analog.c
+++ b/sound/pci/hda/patch_analog.c
@@ -370,6 +370,7 @@ static const struct hda_fixup ad1986a_fi
static const struct snd_pci_quirk ad1986a_fixup_tbl[] = {
SND_PCI_QUIRK(0x103c, 0x30af, "HP B2800", AD1986A_FIXUP_LAPTOP_IMIC),
+ SND_PCI_QUIRK(0x1043, 0x1153, "ASUS M9V", AD1986A_FIXUP_LAPTOP_IMIC),
SND_PCI_QUIRK(0x1043, 0x1443, "ASUS Z99He", AD1986A_FIXUP_EAPD),
SND_PCI_QUIRK(0x1043, 0x1447, "ASUS A8JN", AD1986A_FIXUP_EAPD),
SND_PCI_QUIRK_MASK(0x1043, 0xff00, 0x8100, "ASUS P5", AD1986A_FIXUP_3STACK),
From: Natali Shechtman <[email protected]>
[ Upstream commit f007c13d4ad62f494c83897eda96437005df4a91 ]
In multi-host (MH) NIC scheme, a single HW port serves multiple hosts
or sockets on the same host.
The HW uses a mechanism in the PCIe buffer which monitors
the amount of consumed PCIe buffers per host.
On a certain configuration, under congestion,
the HW emulates a switch doing ECN marking on packets using ECN
indication on the completion descriptor (CQE).
The driver needs to set the ECN bits on the packet SKB,
such that the network stack can react on that, this commit does that.
Needed by downstream patch which fixes a mlx5 checksum issue.
Fixes: bbceefce9adf ("net/mlx5e: Support RX CHECKSUM_COMPLETE")
Signed-off-by: Natali Shechtman <[email protected]>
Reviewed-by: Tariq Toukan <[email protected]>
Signed-off-by: Saeed Mahameed <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/mellanox/mlx5/core/en_rx.c | 35 ++++++++++++++++++---
drivers/net/ethernet/mellanox/mlx5/core/en_stats.c | 3 +
drivers/net/ethernet/mellanox/mlx5/core/en_stats.h | 2 +
3 files changed, 35 insertions(+), 5 deletions(-)
--- a/drivers/net/ethernet/mellanox/mlx5/core/en_rx.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_rx.c
@@ -37,6 +37,7 @@
#include <net/busy_poll.h>
#include <net/ip6_checksum.h>
#include <net/page_pool.h>
+#include <net/inet_ecn.h>
#include "en.h"
#include "en_tc.h"
#include "eswitch.h"
@@ -688,12 +689,29 @@ static inline void mlx5e_skb_set_hash(st
skb_set_hash(skb, be32_to_cpu(cqe->rss_hash_result), ht);
}
-static inline bool is_last_ethertype_ip(struct sk_buff *skb, int *network_depth)
+static inline bool is_last_ethertype_ip(struct sk_buff *skb, int *network_depth,
+ __be16 *proto)
{
- __be16 ethertype = ((struct ethhdr *)skb->data)->h_proto;
+ *proto = ((struct ethhdr *)skb->data)->h_proto;
+ *proto = __vlan_get_protocol(skb, *proto, network_depth);
+ return (*proto == htons(ETH_P_IP) || *proto == htons(ETH_P_IPV6));
+}
+
+static inline void mlx5e_enable_ecn(struct mlx5e_rq *rq, struct sk_buff *skb)
+{
+ int network_depth = 0;
+ __be16 proto;
+ void *ip;
+ int rc;
- ethertype = __vlan_get_protocol(skb, ethertype, network_depth);
- return (ethertype == htons(ETH_P_IP) || ethertype == htons(ETH_P_IPV6));
+ if (unlikely(!is_last_ethertype_ip(skb, &network_depth, &proto)))
+ return;
+
+ ip = skb->data + network_depth;
+ rc = ((proto == htons(ETH_P_IP)) ? IP_ECN_set_ce((struct iphdr *)ip) :
+ IP6_ECN_set_ce(skb, (struct ipv6hdr *)ip));
+
+ rq->stats->ecn_mark += !!rc;
}
static u32 mlx5e_get_fcs(const struct sk_buff *skb)
@@ -717,6 +735,7 @@ static inline void mlx5e_handle_csum(str
{
struct mlx5e_rq_stats *stats = rq->stats;
int network_depth = 0;
+ __be16 proto;
if (unlikely(!(netdev->features & NETIF_F_RXCSUM)))
goto csum_none;
@@ -738,7 +757,7 @@ static inline void mlx5e_handle_csum(str
if (short_frame(skb->len))
goto csum_unnecessary;
- if (likely(is_last_ethertype_ip(skb, &network_depth))) {
+ if (likely(is_last_ethertype_ip(skb, &network_depth, &proto))) {
skb->ip_summed = CHECKSUM_COMPLETE;
skb->csum = csum_unfold((__force __sum16)cqe->check_sum);
if (network_depth > ETH_HLEN)
@@ -775,6 +794,8 @@ csum_none:
stats->csum_none++;
}
+#define MLX5E_CE_BIT_MASK 0x80
+
static inline void mlx5e_build_rx_skb(struct mlx5_cqe64 *cqe,
u32 cqe_bcnt,
struct mlx5e_rq *rq,
@@ -819,6 +840,10 @@ static inline void mlx5e_build_rx_skb(st
skb->mark = be32_to_cpu(cqe->sop_drop_qpn) & MLX5E_TC_FLOW_ID_MASK;
mlx5e_handle_csum(netdev, cqe, rq, skb, !!lro_num_seg);
+ /* checking CE bit in cqe - MSB in ml_path field */
+ if (unlikely(cqe->ml_path & MLX5E_CE_BIT_MASK))
+ mlx5e_enable_ecn(rq, skb);
+
skb->protocol = eth_type_trans(skb, netdev);
}
--- a/drivers/net/ethernet/mellanox/mlx5/core/en_stats.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_stats.c
@@ -53,6 +53,7 @@ static const struct counter_desc sw_stat
{ MLX5E_DECLARE_STAT(struct mlx5e_sw_stats, rx_lro_packets) },
{ MLX5E_DECLARE_STAT(struct mlx5e_sw_stats, rx_lro_bytes) },
+ { MLX5E_DECLARE_STAT(struct mlx5e_sw_stats, rx_ecn_mark) },
{ MLX5E_DECLARE_STAT(struct mlx5e_sw_stats, rx_removed_vlan_packets) },
{ MLX5E_DECLARE_STAT(struct mlx5e_sw_stats, rx_csum_unnecessary) },
{ MLX5E_DECLARE_STAT(struct mlx5e_sw_stats, rx_csum_none) },
@@ -144,6 +145,7 @@ void mlx5e_grp_sw_update_stats(struct ml
s->rx_bytes += rq_stats->bytes;
s->rx_lro_packets += rq_stats->lro_packets;
s->rx_lro_bytes += rq_stats->lro_bytes;
+ s->rx_ecn_mark += rq_stats->ecn_mark;
s->rx_removed_vlan_packets += rq_stats->removed_vlan_packets;
s->rx_csum_none += rq_stats->csum_none;
s->rx_csum_complete += rq_stats->csum_complete;
@@ -1144,6 +1146,7 @@ static const struct counter_desc rq_stat
{ MLX5E_DECLARE_RX_STAT(struct mlx5e_rq_stats, xdp_redirect) },
{ MLX5E_DECLARE_RX_STAT(struct mlx5e_rq_stats, lro_packets) },
{ MLX5E_DECLARE_RX_STAT(struct mlx5e_rq_stats, lro_bytes) },
+ { MLX5E_DECLARE_RX_STAT(struct mlx5e_rq_stats, ecn_mark) },
{ MLX5E_DECLARE_RX_STAT(struct mlx5e_rq_stats, removed_vlan_packets) },
{ MLX5E_DECLARE_RX_STAT(struct mlx5e_rq_stats, wqe_err) },
{ MLX5E_DECLARE_RX_STAT(struct mlx5e_rq_stats, mpwqe_filler_cqes) },
--- a/drivers/net/ethernet/mellanox/mlx5/core/en_stats.h
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_stats.h
@@ -66,6 +66,7 @@ struct mlx5e_sw_stats {
u64 tx_nop;
u64 rx_lro_packets;
u64 rx_lro_bytes;
+ u64 rx_ecn_mark;
u64 rx_removed_vlan_packets;
u64 rx_csum_unnecessary;
u64 rx_csum_none;
@@ -184,6 +185,7 @@ struct mlx5e_rq_stats {
u64 csum_none;
u64 lro_packets;
u64 lro_bytes;
+ u64 ecn_mark;
u64 removed_vlan_packets;
u64 xdp_drop;
u64 xdp_redirect;
From: Nathan Chancellor <[email protected]>
[ Upstream commit 957063c924736d4341e5d588757b9f31e8f6fa24 ]
Clang warns when one enumerated type is implicitly converted to another:
drivers/pinctrl/sprd/pinctrl-sprd.c:845:19: warning: implicit conversion
from enumeration type 'enum sprd_pinconf_params' to different
enumeration type 'enum pin_config_param' [-Wenum-conversion]
{"sprd,control", SPRD_PIN_CONFIG_CONTROL, 0},
~ ^~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/sprd/pinctrl-sprd.c:846:22: warning: implicit conversion
from enumeration type 'enum sprd_pinconf_params' to different
enumeration type 'enum pin_config_param' [-Wenum-conversion]
{"sprd,sleep-mode", SPRD_PIN_CONFIG_SLEEP_MODE, 0},
~ ^~~~~~~~~~~~~~~~~~~~~~~~~~
It is expected that pinctrl drivers can extend pin_config_param because
of the gap between PIN_CONFIG_END and PIN_CONFIG_MAX so this conversion
isn't an issue. Most drivers that take advantage of this define the
PIN_CONFIG variables as constants, rather than enumerated values. Do the
same thing here so that Clang no longer warns.
Link: https://github.com/ClangBuiltLinux/linux/issues/138
Signed-off-by: Nathan Chancellor <[email protected]>
Reviewed-by: Baolin Wang <[email protected]>
Signed-off-by: Linus Walleij <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/pinctrl/sprd/pinctrl-sprd.c | 6 ++----
1 file changed, 2 insertions(+), 4 deletions(-)
diff --git a/drivers/pinctrl/sprd/pinctrl-sprd.c b/drivers/pinctrl/sprd/pinctrl-sprd.c
index 78c2f548b25f1..8f3468d9f848d 100644
--- a/drivers/pinctrl/sprd/pinctrl-sprd.c
+++ b/drivers/pinctrl/sprd/pinctrl-sprd.c
@@ -159,10 +159,8 @@ struct sprd_pinctrl {
struct sprd_pinctrl_soc_info *info;
};
-enum sprd_pinconf_params {
- SPRD_PIN_CONFIG_CONTROL = PIN_CONFIG_END + 1,
- SPRD_PIN_CONFIG_SLEEP_MODE = PIN_CONFIG_END + 2,
-};
+#define SPRD_PIN_CONFIG_CONTROL (PIN_CONFIG_END + 1)
+#define SPRD_PIN_CONFIG_SLEEP_MODE (PIN_CONFIG_END + 2)
static int sprd_pinctrl_get_id_by_name(struct sprd_pinctrl *sprd_pctl,
const char *name)
--
2.20.1
From: Coly Li <[email protected]>
[ Upstream commit cdca22bcbc64fc83dadb8d927df400a8d86ddabb ]
Commit 95f18c9d1310 ("bcache: avoid potential memleak of list of
journal_replay(s) in the CACHE_SYNC branch of run_cache_set") forgets
to remove the original define of LIST_HEAD(journal), which makes
the change no take effect. This patch removes redundant variable
LIST_HEAD(journal) from run_cache_set(), to make Shenghui's fix
working.
Fixes: 95f18c9d1310 ("bcache: avoid potential memleak of list of journal_replay(s) in the CACHE_SYNC branch of run_cache_set")
Reported-by: Juha Aatrokoski <[email protected]>
Cc: Shenghui Wang <[email protected]>
Signed-off-by: Coly Li <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/md/bcache/super.c | 1 -
1 file changed, 1 deletion(-)
diff --git a/drivers/md/bcache/super.c b/drivers/md/bcache/super.c
index e6c7a84bb1dfd..2321643974dab 100644
--- a/drivers/md/bcache/super.c
+++ b/drivers/md/bcache/super.c
@@ -1768,7 +1768,6 @@ static int run_cache_set(struct cache_set *c)
set_gc_sectors(c);
if (CACHE_SYNC(&c->sb)) {
- LIST_HEAD(journal);
struct bkey *k;
struct jset *j;
--
2.20.1
From: Chao Yu <[email protected]>
[ Upstream commit c854f4d681365498f53ba07843a16423625aa7e9 ]
As Jungyeon Reported in bugzilla:
https://bugzilla.kernel.org/show_bug.cgi?id=203233
- Reproduces
gcc poc_13.c
./run.sh f2fs
- Kernel messages
F2FS-fs (sdb): Bitmap was wrongly set, blk:4608
kernel BUG at fs/f2fs/segment.c:2133!
RIP: 0010:update_sit_entry+0x35d/0x3e0
Call Trace:
f2fs_allocate_data_block+0x16c/0x5a0
do_write_page+0x57/0x100
f2fs_do_write_node_page+0x33/0xa0
__write_node_page+0x270/0x4e0
f2fs_sync_node_pages+0x5df/0x670
f2fs_write_checkpoint+0x364/0x13a0
f2fs_sync_fs+0xa3/0x130
f2fs_do_sync_file+0x1a6/0x810
do_fsync+0x33/0x60
__x64_sys_fsync+0xb/0x10
do_syscall_64+0x43/0x110
entry_SYSCALL_64_after_hwframe+0x44/0xa9
The testcase fails because that, in fuzzed image, current segment was
allocated with LFS type, its .next_blkoff should point to an unused
block address, but actually, its bitmap shows it's not. So during
allocation, f2fs crash when setting bitmap.
Introducing sanity_check_curseg() to check such inconsistence of
current in-used segment.
Signed-off-by: Chao Yu <[email protected]>
Signed-off-by: Jaegeuk Kim <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/f2fs/segment.c | 39 +++++++++++++++++++++++++++++++++++++++
1 file changed, 39 insertions(+)
diff --git a/fs/f2fs/segment.c b/fs/f2fs/segment.c
index 8fc3edb6760c2..da7af7822e595 100644
--- a/fs/f2fs/segment.c
+++ b/fs/f2fs/segment.c
@@ -4098,6 +4098,41 @@ static int build_dirty_segmap(struct f2fs_sb_info *sbi)
return init_victim_secmap(sbi);
}
+static int sanity_check_curseg(struct f2fs_sb_info *sbi)
+{
+ int i;
+
+ /*
+ * In LFS/SSR curseg, .next_blkoff should point to an unused blkaddr;
+ * In LFS curseg, all blkaddr after .next_blkoff should be unused.
+ */
+ for (i = 0; i < NO_CHECK_TYPE; i++) {
+ struct curseg_info *curseg = CURSEG_I(sbi, i);
+ struct seg_entry *se = get_seg_entry(sbi, curseg->segno);
+ unsigned int blkofs = curseg->next_blkoff;
+
+ if (f2fs_test_bit(blkofs, se->cur_valid_map))
+ goto out;
+
+ if (curseg->alloc_type == SSR)
+ continue;
+
+ for (blkofs += 1; blkofs < sbi->blocks_per_seg; blkofs++) {
+ if (!f2fs_test_bit(blkofs, se->cur_valid_map))
+ continue;
+out:
+ f2fs_msg(sbi->sb, KERN_ERR,
+ "Current segment's next free block offset is "
+ "inconsistent with bitmap, logtype:%u, "
+ "segno:%u, type:%u, next_blkoff:%u, blkofs:%u",
+ i, curseg->segno, curseg->alloc_type,
+ curseg->next_blkoff, blkofs);
+ return -EINVAL;
+ }
+ }
+ return 0;
+}
+
/*
* Update min, max modified time for cost-benefit GC algorithm
*/
@@ -4193,6 +4228,10 @@ int f2fs_build_segment_manager(struct f2fs_sb_info *sbi)
if (err)
return err;
+ err = sanity_check_curseg(sbi);
+ if (err)
+ return err;
+
init_min_max_mtime(sbi);
return 0;
}
--
2.20.1
From: Ka-Cheong Poon <[email protected]>
[ Upstream commit c5c1a030a7dbf8dd4e1fa4405ae9a89dc1d2a8db ]
In rds_bind(), an rds_sock is added to the RDS bind hash table before
rs_transport is set. This means that the socket can be found by the
receive code path when rs_transport is NULL. And the receive code
path de-references rs_transport for congestion update check. This can
cause a panic. An rds_sock should not be added to the bind hash table
before all the needed fields are set.
Reported-by: [email protected]
Signed-off-by: Ka-Cheong Poon <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/rds/bind.c | 40 ++++++++++++++++++----------------------
1 file changed, 18 insertions(+), 22 deletions(-)
diff --git a/net/rds/bind.c b/net/rds/bind.c
index 0f4398e7f2a7a..05464fd7c17af 100644
--- a/net/rds/bind.c
+++ b/net/rds/bind.c
@@ -1,5 +1,5 @@
/*
- * Copyright (c) 2006, 2018 Oracle and/or its affiliates. All rights reserved.
+ * Copyright (c) 2006, 2019 Oracle and/or its affiliates. All rights reserved.
*
* This software is available to you under a choice of one of two
* licenses. You may choose to be licensed under the terms of the GNU
@@ -239,34 +239,30 @@ int rds_bind(struct socket *sock, struct sockaddr *uaddr, int addr_len)
goto out;
}
- sock_set_flag(sk, SOCK_RCU_FREE);
- ret = rds_add_bound(rs, binding_addr, &port, scope_id);
- if (ret)
- goto out;
-
- if (rs->rs_transport) { /* previously bound */
+ /* The transport can be set using SO_RDS_TRANSPORT option before the
+ * socket is bound.
+ */
+ if (rs->rs_transport) {
trans = rs->rs_transport;
if (trans->laddr_check(sock_net(sock->sk),
binding_addr, scope_id) != 0) {
ret = -ENOPROTOOPT;
- rds_remove_bound(rs);
- } else {
- ret = 0;
+ goto out;
}
- goto out;
- }
- trans = rds_trans_get_preferred(sock_net(sock->sk), binding_addr,
- scope_id);
- if (!trans) {
- ret = -EADDRNOTAVAIL;
- rds_remove_bound(rs);
- pr_info_ratelimited("RDS: %s could not find a transport for %pI6c, load rds_tcp or rds_rdma?\n",
- __func__, binding_addr);
- goto out;
+ } else {
+ trans = rds_trans_get_preferred(sock_net(sock->sk),
+ binding_addr, scope_id);
+ if (!trans) {
+ ret = -EADDRNOTAVAIL;
+ pr_info_ratelimited("RDS: %s could not find a transport for %pI6c, load rds_tcp or rds_rdma?\n",
+ __func__, binding_addr);
+ goto out;
+ }
+ rs->rs_transport = trans;
}
- rs->rs_transport = trans;
- ret = 0;
+ sock_set_flag(sk, SOCK_RCU_FREE);
+ ret = rds_add_bound(rs, binding_addr, &port, scope_id);
out:
release_sock(sk);
--
2.20.1
From: Waiman Long <[email protected]>
[ Upstream commit 513e1073d52e55b8024b4f238a48de7587c64ccf ]
Tetsuo Handa had reported he saw an incorrect "downgrading a read lock"
warning right after a previous lockdep warning. It is likely that the
previous warning turned off lock debugging causing the lockdep to have
inconsistency states leading to the lock downgrade warning.
Fix that by add a check for debug_locks at the beginning of
__lock_downgrade().
Reported-by: Tetsuo Handa <[email protected]>
Reported-by: [email protected]
Signed-off-by: Waiman Long <[email protected]>
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Cc: Andrew Morton <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Paul E. McKenney <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Will Deacon <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Ingo Molnar <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
kernel/locking/lockdep.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/kernel/locking/lockdep.c b/kernel/locking/lockdep.c
index e810e8cb17e18..68ba411a90075 100644
--- a/kernel/locking/lockdep.c
+++ b/kernel/locking/lockdep.c
@@ -3567,6 +3567,9 @@ __lock_set_class(struct lockdep_map *lock, const char *name,
unsigned int depth;
int i;
+ if (unlikely(!debug_locks))
+ return 0;
+
depth = curr->lockdep_depth;
/*
* This function is about (re)setting the class of a held lock,
--
2.20.1
From: Quinn Tran <[email protected]>
[ Upstream commit 9ba1cb25c151de306d64647e545d34af64f30c19 ]
When all fabric scan retries fail, remove all RPorts, DMA resources for the
command. Otherwise we have stale Rports.
Signed-off-by: Quinn Tran <[email protected]>
Signed-off-by: Himanshu Madhani <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/scsi/qla2xxx/qla_gs.c | 128 +++++++++++++++++-----------------
1 file changed, 64 insertions(+), 64 deletions(-)
diff --git a/drivers/scsi/qla2xxx/qla_gs.c b/drivers/scsi/qla2xxx/qla_gs.c
index 98d936f18b65e..34ff4bbc8de10 100644
--- a/drivers/scsi/qla2xxx/qla_gs.c
+++ b/drivers/scsi/qla2xxx/qla_gs.c
@@ -4045,6 +4045,41 @@ void qla24xx_async_gnnft_done(scsi_qla_host_t *vha, srb_t *sp)
}
}
+static int qla2x00_post_gnnft_gpnft_done_work(struct scsi_qla_host *vha,
+ srb_t *sp, int cmd)
+{
+ struct qla_work_evt *e;
+
+ if (cmd != QLA_EVT_GPNFT_DONE && cmd != QLA_EVT_GNNFT_DONE)
+ return QLA_PARAMETER_ERROR;
+
+ e = qla2x00_alloc_work(vha, cmd);
+ if (!e)
+ return QLA_FUNCTION_FAILED;
+
+ e->u.iosb.sp = sp;
+
+ return qla2x00_post_work(vha, e);
+}
+
+static int qla2x00_post_nvme_gpnft_done_work(struct scsi_qla_host *vha,
+ srb_t *sp, int cmd)
+{
+ struct qla_work_evt *e;
+
+ if (cmd != QLA_EVT_GPNFT)
+ return QLA_PARAMETER_ERROR;
+
+ e = qla2x00_alloc_work(vha, cmd);
+ if (!e)
+ return QLA_FUNCTION_FAILED;
+
+ e->u.gpnft.fc4_type = FC4_TYPE_NVME;
+ e->u.gpnft.sp = sp;
+
+ return qla2x00_post_work(vha, e);
+}
+
static void qla2x00_find_free_fcp_nvme_slot(struct scsi_qla_host *vha,
struct srb *sp)
{
@@ -4145,22 +4180,36 @@ static void qla2x00_async_gpnft_gnnft_sp_done(void *s, int res)
{
struct srb *sp = s;
struct scsi_qla_host *vha = sp->vha;
- struct qla_work_evt *e;
struct ct_sns_req *ct_req =
(struct ct_sns_req *)sp->u.iocb_cmd.u.ctarg.req;
u16 cmd = be16_to_cpu(ct_req->command);
u8 fc4_type = sp->gen2;
unsigned long flags;
+ int rc;
/* gen2 field is holding the fc4type */
ql_dbg(ql_dbg_disc, vha, 0xffff,
"Async done-%s res %x FC4Type %x\n",
sp->name, res, sp->gen2);
+ sp->rc = res;
if (res) {
unsigned long flags;
+ const char *name = sp->name;
+
+ /*
+ * We are in an Interrupt context, queue up this
+ * sp for GNNFT_DONE work. This will allow all
+ * the resource to get freed up.
+ */
+ rc = qla2x00_post_gnnft_gpnft_done_work(vha, sp,
+ QLA_EVT_GNNFT_DONE);
+ if (rc) {
+ /* Cleanup here to prevent memory leak */
+ qla24xx_sp_unmap(vha, sp);
+ sp->free(sp);
+ }
- sp->free(sp);
spin_lock_irqsave(&vha->work_lock, flags);
vha->scan.scan_flags &= ~SF_SCANNING;
vha->scan.scan_retry++;
@@ -4171,9 +4220,9 @@ static void qla2x00_async_gpnft_gnnft_sp_done(void *s, int res)
set_bit(LOOP_RESYNC_NEEDED, &vha->dpc_flags);
qla2xxx_wake_dpc(vha);
} else {
- ql_dbg(ql_dbg_disc, sp->vha, 0xffff,
- "Async done-%s rescan failed on all retries\n",
- sp->name);
+ ql_dbg(ql_dbg_disc, vha, 0xffff,
+ "Async done-%s rescan failed on all retries.\n",
+ name);
}
return;
}
@@ -4188,80 +4237,31 @@ static void qla2x00_async_gpnft_gnnft_sp_done(void *s, int res)
vha->scan.scan_flags &= ~SF_SCANNING;
spin_unlock_irqrestore(&vha->work_lock, flags);
- e = qla2x00_alloc_work(vha, QLA_EVT_GPNFT);
- if (!e) {
- /*
- * please ignore kernel warning. Otherwise,
- * we have mem leak.
- */
- if (sp->u.iocb_cmd.u.ctarg.req) {
- dma_free_coherent(&vha->hw->pdev->dev,
- sp->u.iocb_cmd.u.ctarg.req_allocated_size,
- sp->u.iocb_cmd.u.ctarg.req,
- sp->u.iocb_cmd.u.ctarg.req_dma);
- sp->u.iocb_cmd.u.ctarg.req = NULL;
- }
- if (sp->u.iocb_cmd.u.ctarg.rsp) {
- dma_free_coherent(&vha->hw->pdev->dev,
- sp->u.iocb_cmd.u.ctarg.rsp_allocated_size,
- sp->u.iocb_cmd.u.ctarg.rsp,
- sp->u.iocb_cmd.u.ctarg.rsp_dma);
- sp->u.iocb_cmd.u.ctarg.rsp = NULL;
- }
-
- ql_dbg(ql_dbg_disc, vha, 0xffff,
- "Async done-%s unable to alloc work element\n",
- sp->name);
- sp->free(sp);
+ sp->rc = res;
+ rc = qla2x00_post_nvme_gpnft_done_work(vha, sp, QLA_EVT_GPNFT);
+ if (!rc) {
+ qla24xx_sp_unmap(vha, sp);
set_bit(LOCAL_LOOP_UPDATE, &vha->dpc_flags);
set_bit(LOOP_RESYNC_NEEDED, &vha->dpc_flags);
return;
}
- e->u.gpnft.fc4_type = FC4_TYPE_NVME;
- sp->rc = res;
- e->u.gpnft.sp = sp;
-
- qla2x00_post_work(vha, e);
- return;
}
if (cmd == GPN_FT_CMD) {
del_timer(&sp->u.iocb_cmd.timer);
- e = qla2x00_alloc_work(vha, QLA_EVT_GPNFT_DONE);
+ rc = qla2x00_post_gnnft_gpnft_done_work(vha, sp,
+ QLA_EVT_GPNFT_DONE);
} else {
- e = qla2x00_alloc_work(vha, QLA_EVT_GNNFT_DONE);
+ rc = qla2x00_post_gnnft_gpnft_done_work(vha, sp,
+ QLA_EVT_GNNFT_DONE);
}
- if (!e) {
- /* please ignore kernel warning. Otherwise, we have mem leak. */
- if (sp->u.iocb_cmd.u.ctarg.req) {
- dma_free_coherent(&vha->hw->pdev->dev,
- sp->u.iocb_cmd.u.ctarg.req_allocated_size,
- sp->u.iocb_cmd.u.ctarg.req,
- sp->u.iocb_cmd.u.ctarg.req_dma);
- sp->u.iocb_cmd.u.ctarg.req = NULL;
- }
- if (sp->u.iocb_cmd.u.ctarg.rsp) {
- dma_free_coherent(&vha->hw->pdev->dev,
- sp->u.iocb_cmd.u.ctarg.rsp_allocated_size,
- sp->u.iocb_cmd.u.ctarg.rsp,
- sp->u.iocb_cmd.u.ctarg.rsp_dma);
- sp->u.iocb_cmd.u.ctarg.rsp = NULL;
- }
-
- ql_dbg(ql_dbg_disc, vha, 0xffff,
- "Async done-%s unable to alloc work element\n",
- sp->name);
- sp->free(sp);
+ if (rc) {
+ qla24xx_sp_unmap(vha, sp);
set_bit(LOCAL_LOOP_UPDATE, &vha->dpc_flags);
set_bit(LOOP_RESYNC_NEEDED, &vha->dpc_flags);
return;
}
-
- sp->rc = res;
- e->u.iosb.sp = sp;
-
- qla2x00_post_work(vha, e);
}
/*
--
2.20.1
From: Jian-Hong Pan <[email protected]>
[ Upstream commit 6d0762b19c5963ff9e178e8af3626532ee04d93d ]
The ASUS X412FA laptop contains a Realtek RTL8822CE device with an
associated BT chip using a USB ID of 04ca:4005. This ID is added to the
driver.
The /sys/kernel/debug/usb/devices portion for this device is:
T: Bus=01 Lev=01 Prnt=01 Port=09 Cnt=04 Dev#= 4 Spd=12 MxCh= 0
D: Ver= 1.00 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=04ca ProdID=4005 Rev= 0.00
S: Manufacturer=Realtek
S: Product=Bluetooth Radio
S: SerialNumber=00e04c000001
C:* #Ifs= 2 Cfg#= 1 Atr=a0 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms
I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms
I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms
I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms
I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms
Buglink: https://bugzilla.kernel.org/show_bug.cgi?id=204707
Signed-off-by: Jian-Hong Pan <[email protected]>
Signed-off-by: Marcel Holtmann <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/bluetooth/btusb.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index 96b8a00934c4a..08936bf696d33 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -391,6 +391,9 @@ static const struct usb_device_id blacklist_table[] = {
{ USB_DEVICE(0x13d3, 0x3526), .driver_info = BTUSB_REALTEK },
{ USB_DEVICE(0x0b05, 0x185c), .driver_info = BTUSB_REALTEK },
+ /* Additional Realtek 8822CE Bluetooth devices */
+ { USB_DEVICE(0x04ca, 0x4005), .driver_info = BTUSB_REALTEK },
+
/* Silicon Wave based devices */
{ USB_DEVICE(0x0c10, 0x0000), .driver_info = BTUSB_SWAVE },
--
2.20.1
From: Chris Wilson <[email protected]>
[ Upstream commit 3b295cb1a411d9c82bbfaa66bc17a8508716ed07 ]
We need to mark the output polling as disabled to prevent concurrent
irqs from queuing new work as shutdown the probe -- causing that work to
execute after we have freed the structs:
<4> [341.846490] DEBUG_LOCKS_WARN_ON(mutex_is_locked(lock))
<4> [341.846497] WARNING: CPU: 3 PID: 3300 at kernel/locking/mutex-debug.c:103 mutex_destroy+0x49/0x50
<4> [341.846508] Modules linked in: i915(-) vgem thunderbolt snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic mei_hdcp x86_pkg_temp_thermal coretemp crct10dif_pclmul crc32_pclmul ghash_clmulni_intel snd_hda_codec snd_hwdep snd_hda_core snd_pcm mcs7830 btusb usbnet btrtl mii btbcm btintel bluetooth ecdh_generic ecc mei_me mei prime_numbers i2c_hid pinctrl_sunrisepoint pinctrl_intel [last unloaded: i915]
<4> [341.846546] CPU: 3 PID: 3300 Comm: i915_module_loa Tainted: G U 5.2.0-rc2-CI-CI_DRM_6175+ #1
<4> [341.846553] Hardware name: Dell Inc. XPS 13 9360/0823VW, BIOS 2.9.0 07/09/2018
<4> [341.846560] RIP: 0010:mutex_destroy+0x49/0x50
<4> [341.846565] Code: 00 00 5b c3 e8 a8 9f 3b 00 85 c0 74 ed 8b 05 3e 55 23 01 85 c0 75 e3 48 c7 c6 00 d0 08 82 48 c7 c7 a8 aa 07 82 e8 e7 08 fa ff <0f> 0b eb cc 0f 1f 00 48 b8 11 11 11 11 11 11 11 11 48 89 76 20 48
<4> [341.846578] RSP: 0018:ffffc900006cfdb0 EFLAGS: 00010286
<4> [341.846583] RAX: 0000000000000000 RBX: ffff88826759a168 RCX: 0000000000000000
<4> [341.846589] RDX: 0000000000000002 RSI: 0000000000000000 RDI: ffffffff8112844c
<4> [341.846595] RBP: ffff8882708fa548 R08: 0000000000000000 R09: 0000000000039600
<4> [341.846601] R10: 0000000000000000 R11: 0000000000000ce4 R12: ffffffffa07de1e0
<4> [341.846607] R13: 0000000000000000 R14: 0000000000000000 R15: ffffffffa07de2d0
<4> [341.846613] FS: 00007f62b5ae0e40(0000) GS:ffff888276380000(0000) knlGS:0000000000000000
<4> [341.846620] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
<4> [341.846626] CR2: 000055a4e064f4a0 CR3: 0000000266b16006 CR4: 00000000003606e0
<4> [341.846632] Call Trace:
<4> [341.846639] drm_fb_helper_fini.part.17+0xb3/0x100
<4> [341.846682] intel_fbdev_fini+0x20/0x80 [i915]
<4> [341.846722] intel_modeset_cleanup+0x9a/0x140 [i915]
<4> [341.846750] i915_driver_unload+0xa3/0x100 [i915]
<4> [341.846778] i915_pci_remove+0x19/0x30 [i915]
<4> [341.846784] pci_device_remove+0x36/0xb0
<4> [341.846790] device_release_driver_internal+0xd3/0x1b0
<4> [341.846795] driver_detach+0x3f/0x80
<4> [341.846800] bus_remove_driver+0x53/0xd0
<4> [341.846805] pci_unregister_driver+0x25/0xa0
<4> [341.846843] i915_exit+0x16/0x1c [i915]
<4> [341.846849] __se_sys_delete_module+0x162/0x210
<4> [341.846855] ? trace_hardirqs_off_thunk+0x1a/0x1c
<4> [341.846859] ? do_syscall_64+0xd/0x1c0
<4> [341.846864] do_syscall_64+0x55/0x1c0
<4> [341.846869] entry_SYSCALL_64_after_hwframe+0x49/0xbe
<4> [341.846875] RIP: 0033:0x7f62b51871b7
<4> [341.846881] Code: 73 01 c3 48 8b 0d d1 8c 2c 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 b8 b0 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d a1 8c 2c 00 f7 d8 64 89 01 48
<4> [341.846897] RSP: 002b:00007ffe7a227138 EFLAGS: 00000206 ORIG_RAX: 00000000000000b0
<4> [341.846904] RAX: ffffffffffffffda RBX: 00007ffe7a2272b0 RCX: 00007f62b51871b7
<4> [341.846910] RDX: 0000000000000001 RSI: 0000000000000800 RDI: 0000557cd6b55948
<4> [341.846916] RBP: 0000557cd6b558e0 R08: 0000557cd6b5594c R09: 00007ffe7a227160
<4> [341.846922] R10: 00007ffe7a226134 R11: 0000000000000206 R12: 0000000000000000
<4> [341.846927] R13: 00007ffe7a227820 R14: 0000000000000000 R15: 0000000000000000
<4> [341.846936] irq event stamp: 3547847
<4> [341.846940] hardirqs last enabled at (3547847): [<ffffffff819aad2c>] _raw_spin_unlock_irqrestore+0x4c/0x60
<4> [341.846949] hardirqs last disabled at (3547846): [<ffffffff819aab9d>] _raw_spin_lock_irqsave+0xd/0x50
<4> [341.846957] softirqs last enabled at (3547376): [<ffffffff81c0033a>] __do_softirq+0x33a/0x4b9
<4> [341.846966] softirqs last disabled at (3547367): [<ffffffff810b6379>] irq_exit+0xa9/0xc0
<4> [341.846973] WARNING: CPU: 3 PID: 3300 at kernel/locking/mutex-debug.c:103 mutex_destroy+0x49/0x50
<4> [341.846980] ---[ end trace ba94ca8952ba970e ]---
<7> [341.866547] [drm:intel_dp_detect [i915]] MST support? port A: no, sink: no, modparam: yes
<7> [341.890480] [drm:drm_add_display_info] non_desktop set to 0
<7> [341.890530] [drm:drm_add_edid_modes] ELD: no CEA Extension found
<7> [341.890537] [drm:drm_add_display_info] non_desktop set to 0
<7> [341.890578] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:86:eDP-1] probed modes :
<7> [341.890589] [drm:drm_mode_debug_printmodeline] Modeline "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa
<7> [341.890602] [drm:drm_mode_debug_printmodeline] Modeline "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa
<4> [341.890628] general protection fault: 0000 [#1] PREEMPT SMP PTI
<4> [341.890636] CPU: 0 PID: 508 Comm: kworker/0:4 Tainted: G U W 5.2.0-rc2-CI-CI_DRM_6175+ #1
<4> [341.890646] Hardware name: Dell Inc. XPS 13 9360/0823VW, BIOS 2.9.0 07/09/2018
<4> [341.890655] Workqueue: events output_poll_execute
<4> [341.890663] RIP: 0010:drm_setup_crtcs+0x13e/0xbe0
<4> [341.890669] Code: 00 41 8b 44 24 58 85 c0 0f 8e f9 01 00 00 44 8b 6c 24 20 44 8b 74 24 28 31 db 31 ed 49 8b 44 24 60 48 63 d5 44 89 ee 83 c5 01 <48> 8b 04 d0 44 89 f2 48 8b 38 48 8b 87 88 01 00 00 48 8b 40 20 e8
<4> [341.890686] RSP: 0018:ffffc9000033fd40 EFLAGS: 00010202
<4> [341.890692] RAX: 6b6b6b6b6b6b6b6b RBX: 0000000000000002 RCX: 0000000000000000
<4> [341.890700] RDX: 0000000000000001 RSI: 0000000000000c80 RDI: 00000000ffffffff
<4> [341.890707] RBP: 0000000000000002 R08: 0000000000000000 R09: 0000000000000000
<4> [341.890715] R10: 0000000000000c80 R11: 0000000000000000 R12: ffff888267599fe8
<4> [341.890722] R13: 0000000000000c80 R14: 0000000000000708 R15: 0000000000000007
<4> [341.890730] FS: 0000000000000000(0000) GS:ffff888276200000(0000) knlGS:0000000000000000
<4> [341.890739] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
<4> [341.890745] CR2: 000055a4e064f4a0 CR3: 000000026d234003 CR4: 00000000003606f0
<4> [341.890752] Call Trace:
<4> [341.890760] drm_fb_helper_hotplug_event.part.24+0x89/0xb0
<4> [341.890768] drm_kms_helper_hotplug_event+0x21/0x30
<4> [341.890774] output_poll_execute+0x9d/0x1a0
<4> [341.890782] process_one_work+0x245/0x610
<4> [341.890790] worker_thread+0x37/0x380
<4> [341.890796] ? process_one_work+0x610/0x610
<4> [341.890802] kthread+0x119/0x130
<4> [341.890808] ? kthread_park+0x80/0x80
<4> [341.890815] ret_from_fork+0x3a/0x50
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=109964
Signed-off-by: Chris Wilson <[email protected]>
Reviewed-by: Imre Deak <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/drm_probe_helper.c | 9 ++++++++-
1 file changed, 8 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/drm_probe_helper.c b/drivers/gpu/drm/drm_probe_helper.c
index d18b7e27ef64c..c0b26135dbd5b 100644
--- a/drivers/gpu/drm/drm_probe_helper.c
+++ b/drivers/gpu/drm/drm_probe_helper.c
@@ -581,6 +581,9 @@ static void output_poll_execute(struct work_struct *work)
enum drm_connector_status old_status;
bool repoll = false, changed;
+ if (!dev->mode_config.poll_enabled)
+ return;
+
/* Pick up any changes detected by the probe functions. */
changed = dev->mode_config.delayed_event;
dev->mode_config.delayed_event = false;
@@ -735,7 +738,11 @@ EXPORT_SYMBOL(drm_kms_helper_poll_init);
*/
void drm_kms_helper_poll_fini(struct drm_device *dev)
{
- drm_kms_helper_poll_disable(dev);
+ if (!dev->mode_config.poll_enabled)
+ return;
+
+ dev->mode_config.poll_enabled = false;
+ cancel_delayed_work_sync(&dev->mode_config.output_poll_work);
}
EXPORT_SYMBOL(drm_kms_helper_poll_fini);
--
2.20.1
From: Stephen Hemminger <[email protected]>
[ Upstream commit 1e64d7cbfdce4887008314d5b367209582223f27 ]
If IPV6 was disabled, then ss command would cause a kernel warning
because the command was attempting to dump IPV6 socket information.
The fix is to just remove the warning.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=202249
Fixes: 432490f9d455 ("net: ip, diag -- Add diag interface for raw sockets")
Signed-off-by: Stephen Hemminger <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/ipv4/raw_diag.c | 3 ---
1 file changed, 3 deletions(-)
diff --git a/net/ipv4/raw_diag.c b/net/ipv4/raw_diag.c
index c200065ef9a5e..6367ecdf76c42 100644
--- a/net/ipv4/raw_diag.c
+++ b/net/ipv4/raw_diag.c
@@ -23,9 +23,6 @@ raw_get_hashinfo(const struct inet_diag_req_v2 *r)
return &raw_v6_hashinfo;
#endif
} else {
- pr_warn_once("Unexpected inet family %d\n",
- r->sdiag_family);
- WARN_ON_ONCE(1);
return ERR_PTR(-EINVAL);
}
}
--
2.20.1
From: Darrick J. Wong <[email protected]>
[ Upstream commit 8612de3f7ba6e900465e340516b8313806d27b2d ]
Zorro Lang reported a crash in generic/475 if we try to inactivate a
corrupt inode with a NULL attr fork (stack trace shortened somewhat):
RIP: 0010:xfs_bmapi_read+0x311/0xb00 [xfs]
RSP: 0018:ffff888047f9ed68 EFLAGS: 00010202
RAX: dffffc0000000000 RBX: ffff888047f9f038 RCX: 1ffffffff5f99f51
RDX: 0000000000000002 RSI: 0000000000000008 RDI: 0000000000000012
RBP: ffff888002a41f00 R08: ffffed10005483f0 R09: ffffed10005483ef
R10: ffffed10005483ef R11: ffff888002a41f7f R12: 0000000000000004
R13: ffffe8fff53b5768 R14: 0000000000000005 R15: 0000000000000001
FS: 00007f11d44b5b80(0000) GS:ffff888114200000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000ef6000 CR3: 000000002e176003 CR4: 00000000001606e0
Call Trace:
xfs_dabuf_map.constprop.18+0x696/0xe50 [xfs]
xfs_da_read_buf+0xf5/0x2c0 [xfs]
xfs_da3_node_read+0x1d/0x230 [xfs]
xfs_attr_inactive+0x3cc/0x5e0 [xfs]
xfs_inactive+0x4c8/0x5b0 [xfs]
xfs_fs_destroy_inode+0x31b/0x8e0 [xfs]
destroy_inode+0xbc/0x190
xfs_bulkstat_one_int+0xa8c/0x1200 [xfs]
xfs_bulkstat_one+0x16/0x20 [xfs]
xfs_bulkstat+0x6fa/0xf20 [xfs]
xfs_ioc_bulkstat+0x182/0x2b0 [xfs]
xfs_file_ioctl+0xee0/0x12a0 [xfs]
do_vfs_ioctl+0x193/0x1000
ksys_ioctl+0x60/0x90
__x64_sys_ioctl+0x6f/0xb0
do_syscall_64+0x9f/0x4d0
entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x7f11d39a3e5b
The "obvious" cause is that the attr ifork is null despite the inode
claiming an attr fork having at least one extent, but it's not so
obvious why we ended up with an inode in that state.
Reported-by: Zorro Lang <[email protected]>
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=204031
Signed-off-by: Darrick J. Wong <[email protected]>
Reviewed-by: Bill O'Donnell <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/xfs/libxfs/xfs_bmap.c | 29 +++++++++++++++++++++--------
1 file changed, 21 insertions(+), 8 deletions(-)
diff --git a/fs/xfs/libxfs/xfs_bmap.c b/fs/xfs/libxfs/xfs_bmap.c
index 06a7da8dbda5c..38dc0b43c3665 100644
--- a/fs/xfs/libxfs/xfs_bmap.c
+++ b/fs/xfs/libxfs/xfs_bmap.c
@@ -3841,15 +3841,28 @@ xfs_bmapi_read(
XFS_STATS_INC(mp, xs_blk_mapr);
ifp = XFS_IFORK_PTR(ip, whichfork);
+ if (!ifp) {
+ /* No CoW fork? Return a hole. */
+ if (whichfork == XFS_COW_FORK) {
+ mval->br_startoff = bno;
+ mval->br_startblock = HOLESTARTBLOCK;
+ mval->br_blockcount = len;
+ mval->br_state = XFS_EXT_NORM;
+ *nmap = 1;
+ return 0;
+ }
- /* No CoW fork? Return a hole. */
- if (whichfork == XFS_COW_FORK && !ifp) {
- mval->br_startoff = bno;
- mval->br_startblock = HOLESTARTBLOCK;
- mval->br_blockcount = len;
- mval->br_state = XFS_EXT_NORM;
- *nmap = 1;
- return 0;
+ /*
+ * A missing attr ifork implies that the inode says we're in
+ * extents or btree format but failed to pass the inode fork
+ * verifier while trying to load it. Treat that as a file
+ * corruption too.
+ */
+#ifdef DEBUG
+ xfs_alert(mp, "%s: inode %llu missing fork %d",
+ __func__, ip->i_ino, whichfork);
+#endif /* DEBUG */
+ return -EFSCORRUPTED;
}
if (!(ifp->if_flags & XFS_IFEXTENTS)) {
--
2.20.1
From: Jian-Hong Pan <[email protected]>
[ Upstream commit 7af3f558aca74f2ee47b173f1c27f6bb9a5b5561 ]
Realtek RTL8822BE BT chip on ASUS X420FA cannot be turned on correctly
after on-off several times. Bluetooth daemon sets BT mode failed when
this issue happens. Scanning must be active while turning off for this
bug to be hit.
bluetoothd[1576]: Failed to set mode: Failed (0x03)
If BT is turned off, then turned on again, it works correctly again.
According to the vendor driver, the HCI_QUIRK_RESET_ON_CLOSE flag is set
during probing. So, this patch makes Realtek's BT reset on close to fix
this issue.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=203429
Signed-off-by: Jian-Hong Pan <[email protected]>
Reviewed-by: Daniel Drake <[email protected]>
Signed-off-by: Marcel Holtmann <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/bluetooth/btrtl.c | 20 ++++++++++++++++++++
drivers/bluetooth/btrtl.h | 6 ++++++
drivers/bluetooth/btusb.c | 1 +
3 files changed, 27 insertions(+)
diff --git a/drivers/bluetooth/btrtl.c b/drivers/bluetooth/btrtl.c
index 1342f8e6025cc..8d1cd2479e36f 100644
--- a/drivers/bluetooth/btrtl.c
+++ b/drivers/bluetooth/btrtl.c
@@ -639,6 +639,26 @@ int btrtl_setup_realtek(struct hci_dev *hdev)
}
EXPORT_SYMBOL_GPL(btrtl_setup_realtek);
+int btrtl_shutdown_realtek(struct hci_dev *hdev)
+{
+ struct sk_buff *skb;
+ int ret;
+
+ /* According to the vendor driver, BT must be reset on close to avoid
+ * firmware crash.
+ */
+ skb = __hci_cmd_sync(hdev, HCI_OP_RESET, 0, NULL, HCI_INIT_TIMEOUT);
+ if (IS_ERR(skb)) {
+ ret = PTR_ERR(skb);
+ bt_dev_err(hdev, "HCI reset during shutdown failed");
+ return ret;
+ }
+ kfree_skb(skb);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(btrtl_shutdown_realtek);
+
static unsigned int btrtl_convert_baudrate(u32 device_baudrate)
{
switch (device_baudrate) {
diff --git a/drivers/bluetooth/btrtl.h b/drivers/bluetooth/btrtl.h
index f5e36f3993a81..852f27d4ee289 100644
--- a/drivers/bluetooth/btrtl.h
+++ b/drivers/bluetooth/btrtl.h
@@ -65,6 +65,7 @@ void btrtl_free(struct btrtl_device_info *btrtl_dev);
int btrtl_download_firmware(struct hci_dev *hdev,
struct btrtl_device_info *btrtl_dev);
int btrtl_setup_realtek(struct hci_dev *hdev);
+int btrtl_shutdown_realtek(struct hci_dev *hdev);
int btrtl_get_uart_settings(struct hci_dev *hdev,
struct btrtl_device_info *btrtl_dev,
unsigned int *controller_baudrate,
@@ -93,6 +94,11 @@ static inline int btrtl_setup_realtek(struct hci_dev *hdev)
return -EOPNOTSUPP;
}
+static inline int btrtl_shutdown_realtek(struct hci_dev *hdev)
+{
+ return -EOPNOTSUPP;
+}
+
static inline int btrtl_get_uart_settings(struct hci_dev *hdev,
struct btrtl_device_info *btrtl_dev,
unsigned int *controller_baudrate,
diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index 09c83dc2ef677..96b8a00934c4a 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -3128,6 +3128,7 @@ static int btusb_probe(struct usb_interface *intf,
#ifdef CONFIG_BT_HCIBTUSB_RTL
if (id->driver_info & BTUSB_REALTEK) {
hdev->setup = btrtl_setup_realtek;
+ hdev->shutdown = btrtl_shutdown_realtek;
/* Realtek devices lose their updated firmware over suspend,
* but the USB hub doesn't notice any status change.
--
2.20.1
From: Fernando Fernandez Mancera <[email protected]>
[ Upstream commit 039b1f4f24ecc8493b6bb9d70b4b78750d1b35c2 ]
The socket assignment is wrong, see skb_orphan():
When skb->destructor callback is not set, but skb->sk is set, this hits BUG().
Link: https://bugzilla.redhat.com/show_bug.cgi?id=1651813
Fixes: 554ced0a6e29 ("netfilter: nf_tables: add support for native socket matching")
Signed-off-by: Fernando Fernandez Mancera <[email protected]>
Signed-off-by: Pablo Neira Ayuso <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/netfilter/nft_socket.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/net/netfilter/nft_socket.c b/net/netfilter/nft_socket.c
index d7f3776dfd719..637ce3e8c575c 100644
--- a/net/netfilter/nft_socket.c
+++ b/net/netfilter/nft_socket.c
@@ -47,9 +47,6 @@ static void nft_socket_eval(const struct nft_expr *expr,
return;
}
- /* So that subsequent socket matching not to require other lookups. */
- skb->sk = sk;
-
switch(priv->key) {
case NFT_SOCKET_TRANSPARENT:
nft_reg_store8(dest, inet_sk_transparent(sk));
@@ -66,6 +63,9 @@ static void nft_socket_eval(const struct nft_expr *expr,
WARN_ON(1);
regs->verdict.code = NFT_BREAK;
}
+
+ if (sk != skb->sk)
+ sock_gen_put(sk);
}
static const struct nla_policy nft_socket_policy[NFTA_SOCKET_MAX + 1] = {
--
2.20.1
From: Mikulas Patocka <[email protected]>
[ Upstream commit 0c8e9c2d668278652af028c3cc068c65f66342f4 ]
Commit 75d66ffb48efb30f2dd42f041ba8b39c5b2bd115 ("dm zoned: properly
handle backing device failure") triggers a coverity warning:
*** CID 1452808: Memory - illegal accesses (USE_AFTER_FREE)
/drivers/md/dm-zoned-target.c: 137 in dmz_submit_bio()
131 clone->bi_private = bioctx;
132
133 bio_advance(bio, clone->bi_iter.bi_size);
134
135 refcount_inc(&bioctx->ref);
136 generic_make_request(clone);
>>> CID 1452808: Memory - illegal accesses (USE_AFTER_FREE)
>>> Dereferencing freed pointer "clone".
137 if (clone->bi_status == BLK_STS_IOERR)
138 return -EIO;
139
140 if (bio_op(bio) == REQ_OP_WRITE && dmz_is_seq(zone))
141 zone->wp_block += nr_blocks;
142
The "clone" bio may be processed and freed before the check
"clone->bi_status == BLK_STS_IOERR" - so this check can access invalid
memory.
Fixes: 75d66ffb48efb3 ("dm zoned: properly handle backing device failure")
Cc: [email protected]
Signed-off-by: Mikulas Patocka <[email protected]>
Reviewed-by: Damien Le Moal <[email protected]>
Signed-off-by: Mike Snitzer <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/md/dm-zoned-target.c | 2 --
1 file changed, 2 deletions(-)
diff --git a/drivers/md/dm-zoned-target.c b/drivers/md/dm-zoned-target.c
index 1030c42add05f..3dd668f694051 100644
--- a/drivers/md/dm-zoned-target.c
+++ b/drivers/md/dm-zoned-target.c
@@ -133,8 +133,6 @@ static int dmz_submit_bio(struct dmz_target *dmz, struct dm_zone *zone,
atomic_inc(&bioctx->ref);
generic_make_request(clone);
- if (clone->bi_status == BLK_STS_IOERR)
- return -EIO;
if (bio_op(bio) == REQ_OP_WRITE && dmz_is_seq(zone))
zone->wp_block += nr_blocks;
--
2.20.1
From: Vadim Sukhomlinov <[email protected]>
commit db4d8cb9c9f2af71c4d087817160d866ed572cc9 upstream
TPM 2.0 Shutdown involve sending TPM2_Shutdown to TPM chip and disabling
future TPM operations. TPM 1.2 behavior was different, future TPM
operations weren't disabled, causing rare issues. This patch ensures
that future TPM operations are disabled.
Fixes: d1bd4a792d39 ("tpm: Issue a TPM2_Shutdown for TPM2 devices.")
Cc: [email protected]
Signed-off-by: Vadim Sukhomlinov <[email protected]>
[dianders: resolved merge conflicts with mainline]
Signed-off-by: Douglas Anderson <[email protected]>
Reviewed-by: Jarkko Sakkinen <[email protected]>
Signed-off-by: Jarkko Sakkinen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/char/tpm/tpm-chip.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/char/tpm/tpm-chip.c b/drivers/char/tpm/tpm-chip.c
index 46caadca916a0..dccc61af9ffab 100644
--- a/drivers/char/tpm/tpm-chip.c
+++ b/drivers/char/tpm/tpm-chip.c
@@ -187,12 +187,15 @@ static int tpm_class_shutdown(struct device *dev)
{
struct tpm_chip *chip = container_of(dev, struct tpm_chip, dev);
+ down_write(&chip->ops_sem);
if (chip->flags & TPM_CHIP_FLAG_TPM2) {
down_write(&chip->ops_sem);
tpm2_shutdown(chip, TPM2_SU_CLEAR);
chip->ops = NULL;
up_write(&chip->ops_sem);
}
+ chip->ops = NULL;
+ up_write(&chip->ops_sem);
return 0;
}
--
2.20.1
From: Himanshu Madhani <[email protected]>
[ Upstream commit ef801f07e7b3cc1786d8ab1b4fdf069cc2a136d2 ]
This patch fixes commit bcc71cc3cde1 ("scsi: qla2xxx: Fix for double
free of SRB structure") which placed code in wrong routines.
Also updated the use of WARN_ON() to WARN_ON_ONCE() to prevent
flooding log messages.
Fixes: bcc71cc3cde1 ("scsi: qla2xxx: Fix for double free of SRB structure")
Signed-off-by: Himanshu Madhani <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/scsi/qla2xxx/qla_init.c | 11 +++++------
1 file changed, 5 insertions(+), 6 deletions(-)
diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c
index 39a8f4a671aaa..7c1f36b69bdc3 100644
--- a/drivers/scsi/qla2xxx/qla_init.c
+++ b/drivers/scsi/qla2xxx/qla_init.c
@@ -54,7 +54,7 @@ qla2x00_sp_timeout(struct timer_list *t)
unsigned long flags;
struct qla_hw_data *ha = sp->vha->hw;
- WARN_ON(irqs_disabled());
+ WARN_ON_ONCE(irqs_disabled());
spin_lock_irqsave(&ha->hardware_lock, flags);
req = sp->qpair->req;
req->outstanding_cmds[sp->handle] = NULL;
@@ -796,6 +796,9 @@ qla24xx_async_gnl_sp_done(void *s, int res)
sp->name, res, sp->u.iocb_cmd.u.mbx.in_mb[1],
sp->u.iocb_cmd.u.mbx.in_mb[2]);
+ if (res == QLA_FUNCTION_TIMEOUT)
+ return;
+
memset(&ea, 0, sizeof(ea));
ea.sp = sp;
ea.rc = res;
@@ -979,17 +982,13 @@ void qla24xx_async_gpdb_sp_done(void *s, int res)
"Async done-%s res %x, WWPN %8phC mb[1]=%x mb[2]=%x \n",
sp->name, res, fcport->port_name, mb[1], mb[2]);
- fcport->flags &= ~(FCF_ASYNC_SENT | FCF_ASYNC_ACTIVE);
-
- if (res == QLA_FUNCTION_TIMEOUT)
- return;
-
if (res == QLA_FUNCTION_TIMEOUT) {
dma_pool_free(sp->vha->hw->s_dma_pool, sp->u.iocb_cmd.u.mbx.in,
sp->u.iocb_cmd.u.mbx.in_dma);
return;
}
+ fcport->flags &= ~(FCF_ASYNC_SENT | FCF_ASYNC_ACTIVE);
memset(&ea, 0, sizeof(ea));
ea.event = FCME_GPDB_DONE;
ea.fcport = fcport;
--
2.20.1
From: Greg Kurz <[email protected]>
commit 6ccb4ac2bf8a35c694ead92f8ac5530a16e8f2c8 upstream.
There's a bug in skiboot that causes the OPAL_XIVE_ALLOCATE_IRQ call
to return the 32-bit value 0xffffffff when OPAL has run out of IRQs.
Unfortunatelty, OPAL return values are signed 64-bit entities and
errors are supposed to be negative. If that happens, the linux code
confusingly treats 0xffffffff as a valid IRQ number and panics at some
point.
A fix was recently merged in skiboot:
e97391ae2bb5 ("xive: fix return value of opal_xive_allocate_irq()")
but we need a workaround anyway to support older skiboots already
in the field.
Internally convert 0xffffffff to OPAL_RESOURCE which is the usual error
returned upon resource exhaustion.
Cc: [email protected] # v4.12+
Signed-off-by: Greg Kurz <[email protected]>
Reviewed-by: Cédric Le Goater <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
(groug: fix arch/powerpc/platforms/powernv/opal-wrappers.S instead of
non-existing arch/powerpc/platforms/powernv/opal-call.c)
Signed-off-by: Greg Kurz <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/powerpc/include/asm/opal.h | 2 +-
arch/powerpc/platforms/powernv/opal-wrappers.S | 2 +-
arch/powerpc/sysdev/xive/native.c | 11 +++++++++++
3 files changed, 13 insertions(+), 2 deletions(-)
--- a/arch/powerpc/include/asm/opal.h
+++ b/arch/powerpc/include/asm/opal.h
@@ -275,7 +275,7 @@ int64_t opal_xive_get_vp_info(uint64_t v
int64_t opal_xive_set_vp_info(uint64_t vp,
uint64_t flags,
uint64_t report_cl_pair);
-int64_t opal_xive_allocate_irq(uint32_t chip_id);
+int64_t opal_xive_allocate_irq_raw(uint32_t chip_id);
int64_t opal_xive_free_irq(uint32_t girq);
int64_t opal_xive_sync(uint32_t type, uint32_t id);
int64_t opal_xive_dump(uint32_t type, uint32_t id);
--- a/arch/powerpc/platforms/powernv/opal-wrappers.S
+++ b/arch/powerpc/platforms/powernv/opal-wrappers.S
@@ -303,7 +303,7 @@ OPAL_CALL(opal_xive_set_queue_info, OPA
OPAL_CALL(opal_xive_donate_page, OPAL_XIVE_DONATE_PAGE);
OPAL_CALL(opal_xive_alloc_vp_block, OPAL_XIVE_ALLOCATE_VP_BLOCK);
OPAL_CALL(opal_xive_free_vp_block, OPAL_XIVE_FREE_VP_BLOCK);
-OPAL_CALL(opal_xive_allocate_irq, OPAL_XIVE_ALLOCATE_IRQ);
+OPAL_CALL(opal_xive_allocate_irq_raw, OPAL_XIVE_ALLOCATE_IRQ);
OPAL_CALL(opal_xive_free_irq, OPAL_XIVE_FREE_IRQ);
OPAL_CALL(opal_xive_get_vp_info, OPAL_XIVE_GET_VP_INFO);
OPAL_CALL(opal_xive_set_vp_info, OPAL_XIVE_SET_VP_INFO);
--- a/arch/powerpc/sysdev/xive/native.c
+++ b/arch/powerpc/sysdev/xive/native.c
@@ -235,6 +235,17 @@ static bool xive_native_match(struct dev
return of_device_is_compatible(node, "ibm,opal-xive-vc");
}
+static s64 opal_xive_allocate_irq(u32 chip_id)
+{
+ s64 irq = opal_xive_allocate_irq_raw(chip_id);
+
+ /*
+ * Old versions of skiboot can incorrectly return 0xffffffff to
+ * indicate no space, fix it up here.
+ */
+ return irq == 0xffffffff ? OPAL_RESOURCE : irq;
+}
+
#ifdef CONFIG_SMP
static int xive_native_get_ipi(unsigned int cpu, struct xive_cpu *xc)
{
On 2019/09/29 22:54, Greg Kroah-Hartman wrote:
> From: Waiman Long <[email protected]>
>
> [ Upstream commit 513e1073d52e55b8024b4f238a48de7587c64ccf ]
>
> Tetsuo Handa had reported he saw an incorrect "downgrading a read lock"
> warning right after a previous lockdep warning. It is likely that the
> previous warning turned off lock debugging causing the lockdep to have
> inconsistency states leading to the lock downgrade warning.
>
> Fix that by add a check for debug_locks at the beginning of
> __lock_downgrade().
Please drop "[PATCH 4.19 36/63] locking/lockdep: Add debug_locks check in __lock_downgrade()".
We had a revert patch shown below in the past.
"[PATCH 4.19 37/63] locking/lockdep: Add debug_locks check in __lock_downgrade() - again" seems the correct patch.
On 2019/04/25 17:08, [email protected] wrote:>
> This is a note to let you know that I've just added the patch titled
>
> Revert "locking/lockdep: Add debug_locks check in __lock_downgrade()"
>
> to the 4.19-stable tree which can be found at:
> http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary
>
> The filename of the patch is:
> revert-locking-lockdep-add-debug_locks-check-in-__lock_downgrade.patch
> and it can be found in the queue-4.19 subdirectory.
>
> If you, or anyone else, feels it should not be added to the stable tree,
> please let <[email protected]> know about it.
>
>
>>From 7f437eec35a20f40d9ff82ae1c072b211c29e8e0 Mon Sep 17 00:00:00 2001
> From: Greg Kroah-Hartman <[email protected]>
> Date: Thu, 25 Apr 2019 10:00:43 +0200
> Subject: Revert "locking/lockdep: Add debug_locks check in __lock_downgrade()"
>
> From: Greg Kroah-Hartman <[email protected]>
>
> This reverts commit 0e0f7b30721233ce610bde2395a8e58ff7771475 which was
> commit 71492580571467fb7177aade19c18ce7486267f5 upstream.
>
> Tetsuo rightly points out that the backport here is incorrect, as it
> touches the __lock_set_class function instead of the intended
> __lock_downgrade function.
>
> Reported-by: Tetsuo Handa <[email protected]>
> Cc: Waiman Long <[email protected]>
> Cc: Peter Zijlstra (Intel) <[email protected]>
> Cc: Andrew Morton <[email protected]>
> Cc: Linus Torvalds <[email protected]>
> Cc: Paul E. McKenney <[email protected]>
> Cc: Peter Zijlstra <[email protected]>
> Cc: Thomas Gleixner <[email protected]>
> Cc: Will Deacon <[email protected]>
> Cc: Ingo Molnar <[email protected]>
> Cc: Sasha Levin <[email protected]>
> Signed-off-by: Greg Kroah-Hartman <[email protected]>
> ---
> kernel/locking/lockdep.c | 3 ---
> 1 file changed, 3 deletions(-)
>
> --- a/kernel/locking/lockdep.c
> +++ b/kernel/locking/lockdep.c
> @@ -3567,9 +3567,6 @@ __lock_set_class(struct lockdep_map *loc
> unsigned int depth;
> int i;
>
> - if (unlikely(!debug_locks))
> - return 0;
> -
> depth = curr->lockdep_depth;
> /*
> * This function is about (re)setting the class of a held lock,
>
>
stable-rc/linux-4.19.y boot: 80 boots: 1 failed, 78 passed with 1 conflict (v4.19.75-64-gb52c75f7b978)
Full Boot Summary: https://kernelci.org/boot/all/job/stable-rc/branch/linux-4.19.y/kernel/v4.19.75-64-gb52c75f7b978/
Full Build Summary: https://kernelci.org/build/stable-rc/branch/linux-4.19.y/kernel/v4.19.75-64-gb52c75f7b978/
Tree: stable-rc
Branch: linux-4.19.y
Git Describe: v4.19.75-64-gb52c75f7b978
Git Commit: b52c75f7b9785d0d0e6bf145787ed2fc99f5483c
Git URL: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
Tested: 43 unique boards, 15 SoC families, 13 builds out of 206
Boot Regressions Detected:
arm:
tegra_defconfig:
gcc-8:
tegra124-nyan-big:
lab-collabora: new failure (last pass: v4.19.75-33-gdab8e08e7087)
Boot Failure Detected:
arm:
tegra_defconfig:
gcc-8:
tegra124-nyan-big: 1 failed lab
Conflicting Boot Failure Detected: (These likely are not failures as other labs are reporting PASS. Needs review.)
arm:
exynos_defconfig:
exynos5422-odroidxu3:
lab-collabora: PASS (gcc-8)
lab-baylibre: FAIL (gcc-8)
---
For more info write to <[email protected]>
On Sun, Sep 29, 2019 at 11:43:38PM +0900, Tetsuo Handa wrote:
>On 2019/09/29 22:54, Greg Kroah-Hartman wrote:
>> From: Waiman Long <[email protected]>
>>
>> [ Upstream commit 513e1073d52e55b8024b4f238a48de7587c64ccf ]
>>
>> Tetsuo Handa had reported he saw an incorrect "downgrading a read lock"
>> warning right after a previous lockdep warning. It is likely that the
>> previous warning turned off lock debugging causing the lockdep to have
>> inconsistency states leading to the lock downgrade warning.
>>
>> Fix that by add a check for debug_locks at the beginning of
>> __lock_downgrade().
>
>Please drop "[PATCH 4.19 36/63] locking/lockdep: Add debug_locks check in __lock_downgrade()".
>We had a revert patch shown below in the past.
We had a revert in the stable trees, but that revert was incorrect.
Take a look at commit 513e1073d52e55 upstream, it patches
__lock_set_class() (even though the subject line says
__lock_downgrade()). So this is not a backporting error as the revert
said it is, but is rather the intended location to be patched.
If this is actually wrong, then it should be addressed upstream first.
--
Thanks,
Sasha
On 2019/09/30 9:28, Sasha Levin wrote:
> On Sun, Sep 29, 2019 at 11:43:38PM +0900, Tetsuo Handa wrote:
>> On 2019/09/29 22:54, Greg Kroah-Hartman wrote:
>>> From: Waiman Long <[email protected]>
>>>
>>> [ Upstream commit 513e1073d52e55b8024b4f238a48de7587c64ccf ]
>>>
>>> Tetsuo Handa had reported he saw an incorrect "downgrading a read lock"
>>> warning right after a previous lockdep warning. It is likely that the
>>> previous warning turned off lock debugging causing the lockdep to have
>>> inconsistency states leading to the lock downgrade warning.
>>>
>>> Fix that by add a check for debug_locks at the beginning of
>>> __lock_downgrade().
>>
>> Please drop "[PATCH 4.19 36/63] locking/lockdep: Add debug_locks check in __lock_downgrade()".
>> We had a revert patch shown below in the past.
>
> We had a revert in the stable trees, but that revert was incorrect.
>
> Take a look at commit 513e1073d52e55 upstream, it patches
> __lock_set_class() (even though the subject line says
> __lock_downgrade()). So this is not a backporting error as the revert
> said it is, but is rather the intended location to be patched.
>
> If this is actually wrong, then it should be addressed upstream first.
>
Hmm, upstream has two commits with same author, same date, same subject, different hash, different content.
I couldn't find from https://lkml.kernel.org/r/[email protected] that
we want to patch both __lock_set_class() and __lock_downgrade(), but I found that the tip-bot has patched
__lock_downgrade() on "2019-01-21 11:29" and __lock_set_class() on "2019-02-04 8:56".
Seems that we by error patched both functions, though patching both functions should be harmless...
64aa348ed kernel/lockdep.c (Peter Zijlstra 2008-08-11 09:30:21 +0200 4115) static int
00ef9f734 kernel/lockdep.c (Peter Zijlstra 2008-12-04 09:00:17 +0100 4116) __lock_set_class(struct lockdep_map *lock, const char *name,
00ef9f734 kernel/lockdep.c (Peter Zijlstra 2008-12-04 09:00:17 +0100 4117) struct lock_class_key *key, unsigned int subclass,
00ef9f734 kernel/lockdep.c (Peter Zijlstra 2008-12-04 09:00:17 +0100 4118) unsigned long ip)
64aa348ed kernel/lockdep.c (Peter Zijlstra 2008-08-11 09:30:21 +0200 4119) {
64aa348ed kernel/lockdep.c (Peter Zijlstra 2008-08-11 09:30:21 +0200 4120) struct task_struct *curr = current;
8c8889d8e kernel/locking/lockdep.c (Imre Deak 2019-05-24 23:15:08 +0300 4121) unsigned int depth, merged = 0;
41c2c5b86 kernel/locking/lockdep.c (J. R. Okajima 2017-02-03 01:38:15 +0900 4122) struct held_lock *hlock;
64aa348ed kernel/lockdep.c (Peter Zijlstra 2008-08-11 09:30:21 +0200 4123) struct lock_class *class;
64aa348ed kernel/lockdep.c (Peter Zijlstra 2008-08-11 09:30:21 +0200 4124) int i;
64aa348ed kernel/lockdep.c (Peter Zijlstra 2008-08-11 09:30:21 +0200 4125)
513e1073d kernel/locking/lockdep.c (Waiman Long 2019-01-09 23:03:25 -0500 4126) if (unlikely(!debug_locks))
513e1073d kernel/locking/lockdep.c (Waiman Long 2019-01-09 23:03:25 -0500 4127) return 0;
513e1073d kernel/locking/lockdep.c (Waiman Long 2019-01-09 23:03:25 -0500 4128)
6419c4af7 kernel/locking/lockdep.c (J. R. Okajima 2017-02-03 01:38:17 +0900 4162) static int __lock_downgrade(struct lockdep_map *lock, unsigned long ip)
6419c4af7 kernel/locking/lockdep.c (J. R. Okajima 2017-02-03 01:38:17 +0900 4163) {
6419c4af7 kernel/locking/lockdep.c (J. R. Okajima 2017-02-03 01:38:17 +0900 4164) struct task_struct *curr = current;
8c8889d8e kernel/locking/lockdep.c (Imre Deak 2019-05-24 23:15:08 +0300 4165) unsigned int depth, merged = 0;
6419c4af7 kernel/locking/lockdep.c (J. R. Okajima 2017-02-03 01:38:17 +0900 4166) struct held_lock *hlock;
6419c4af7 kernel/locking/lockdep.c (J. R. Okajima 2017-02-03 01:38:17 +0900 4167) int i;
6419c4af7 kernel/locking/lockdep.c (J. R. Okajima 2017-02-03 01:38:17 +0900 4168)
714925805 kernel/locking/lockdep.c (Waiman Long 2019-01-09 23:03:25 -0500 4169) if (unlikely(!debug_locks))
714925805 kernel/locking/lockdep.c (Waiman Long 2019-01-09 23:03:25 -0500 4170) return 0;
714925805 kernel/locking/lockdep.c (Waiman Long 2019-01-09 23:03:25 -0500 4171)
commit 513e1073d52e55b8024b4f238a48de7587c64ccf
Author: Waiman Long <[email protected]>
Date: Wed Jan 9 23:03:25 2019 -0500
locking/lockdep: Add debug_locks check in __lock_downgrade()
commit 71492580571467fb7177aade19c18ce7486267f5
Author: Waiman Long <[email protected]>
Date: Wed Jan 9 23:03:25 2019 -0500
locking/lockdep: Add debug_locks check in __lock_downgrade()
> From: Vadim Sukhomlinov <[email protected]>
>
> commit db4d8cb9c9f2af71c4d087817160d866ed572cc9 upstream
>
> TPM 2.0 Shutdown involve sending TPM2_Shutdown to TPM chip and disabling
> future TPM operations. TPM 1.2 behavior was different, future TPM
> operations weren't disabled, causing rare issues. This patch ensures
> that future TPM operations are disabled.
> diff --git a/drivers/char/tpm/tpm-chip.c b/drivers/char/tpm/tpm-chip.c
> index 46caadca916a0..dccc61af9ffab 100644
> --- a/drivers/char/tpm/tpm-chip.c
> +++ b/drivers/char/tpm/tpm-chip.c
> @@ -187,12 +187,15 @@ static int tpm_class_shutdown(struct device *dev)
> {
> struct tpm_chip *chip = container_of(dev, struct tpm_chip, dev);
>
> + down_write(&chip->ops_sem);
> if (chip->flags & TPM_CHIP_FLAG_TPM2) {
> down_write(&chip->ops_sem);
> tpm2_shutdown(chip, TPM2_SU_CLEAR);
> chip->ops = NULL;
> up_write(&chip->ops_sem);
> }
> + chip->ops = NULL;
> + up_write(&chip->ops_sem);
This is wrong, it takes &chip->ops_sem twice, that can't be
good. db4d8cb9c9f2af71c4d087817160d866ed572cc9 does not have that
problem.
Best regards,
Pavel
--
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
Hi!
> + for (blkofs += 1; blkofs < sbi->blocks_per_seg; blkofs++) {
> + if (!f2fs_test_bit(blkofs, se->cur_valid_map))
> + continue;
> +out:
> + f2fs_msg(sbi->sb, KERN_ERR,
> + "Current segment's next free block offset is "
> + "inconsistent with bitmap, logtype:%u, "
> + "segno:%u, type:%u, next_blkoff:%u, blkofs:%u",
> + i, curseg->segno, curseg->alloc_type,
> + curseg->next_blkoff, blkofs);
> + return -EINVAL;
> + }
So this is detecting filesystem corruption, right? Should it be
-EUCLEAN?
Pavel
--
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
Hello,
On 2019/9/30 15:21, Pavel Machek wrote:
> Hi!
>
>
>> + for (blkofs += 1; blkofs < sbi->blocks_per_seg; blkofs++) {
>> + if (!f2fs_test_bit(blkofs, se->cur_valid_map))
>> + continue;
>> +out:
>> + f2fs_msg(sbi->sb, KERN_ERR,
>> + "Current segment's next free block offset is "
>> + "inconsistent with bitmap, logtype:%u, "
>> + "segno:%u, type:%u, next_blkoff:%u, blkofs:%u",
>> + i, curseg->segno, curseg->alloc_type,
>> + curseg->next_blkoff, blkofs);
>> + return -EINVAL;
>> + }
>
> So this is detecting filesystem corruption, right? Should it be
> -EUCLEAN?
Was fixed in another commit 10f966bbf521 ("f2fs: use generic
EFSBADCRC/EFSCORRUPTED"). :)
Thanks,
>
> Pavel
>
On Mon, Sep 30, 2019 at 10:46:39AM +0900, Tetsuo Handa wrote:
>On 2019/09/30 9:28, Sasha Levin wrote:
>> On Sun, Sep 29, 2019 at 11:43:38PM +0900, Tetsuo Handa wrote:
>>> On 2019/09/29 22:54, Greg Kroah-Hartman wrote:
>>>> From: Waiman Long <[email protected]>
>>>>
>>>> [ Upstream commit 513e1073d52e55b8024b4f238a48de7587c64ccf ]
>>>>
>>>> Tetsuo Handa had reported he saw an incorrect "downgrading a read lock"
>>>> warning right after a previous lockdep warning. It is likely that the
>>>> previous warning turned off lock debugging causing the lockdep to have
>>>> inconsistency states leading to the lock downgrade warning.
>>>>
>>>> Fix that by add a check for debug_locks at the beginning of
>>>> __lock_downgrade().
>>>
>>> Please drop "[PATCH 4.19 36/63] locking/lockdep: Add debug_locks check in __lock_downgrade()".
>>> We had a revert patch shown below in the past.
>>
>> We had a revert in the stable trees, but that revert was incorrect.
>>
>> Take a look at commit 513e1073d52e55 upstream, it patches
>> __lock_set_class() (even though the subject line says
>> __lock_downgrade()). So this is not a backporting error as the revert
>> said it is, but is rather the intended location to be patched.
>>
>> If this is actually wrong, then it should be addressed upstream first.
>>
>
>Hmm, upstream has two commits with same author, same date, same subject, different hash, different content.
>I couldn't find from https://lkml.kernel.org/r/[email protected] that
>we want to patch both __lock_set_class() and __lock_downgrade(), but I found that the tip-bot has patched
>__lock_downgrade() on "2019-01-21 11:29" and __lock_set_class() on "2019-02-04 8:56".
>Seems that we by error patched both functions, though patching both functions should be harmless...
Right, there's a lot of confusion between the duplicate subject lines
and what this patch actually does. My point was that this is an upstream
issue rather than a stable issue, we're just aligning with upstream
here.
--
Thanks,
Sasha
On Mon, Sep 30, 2019 at 08:13:46AM +0200, Pavel Machek wrote:
>> From: Vadim Sukhomlinov <[email protected]>
>>
>> commit db4d8cb9c9f2af71c4d087817160d866ed572cc9 upstream
>>
>> TPM 2.0 Shutdown involve sending TPM2_Shutdown to TPM chip and disabling
>> future TPM operations. TPM 1.2 behavior was different, future TPM
>> operations weren't disabled, causing rare issues. This patch ensures
>> that future TPM operations are disabled.
>
>> diff --git a/drivers/char/tpm/tpm-chip.c b/drivers/char/tpm/tpm-chip.c
>> index 46caadca916a0..dccc61af9ffab 100644
>> --- a/drivers/char/tpm/tpm-chip.c
>> +++ b/drivers/char/tpm/tpm-chip.c
>> @@ -187,12 +187,15 @@ static int tpm_class_shutdown(struct device *dev)
>> {
>> struct tpm_chip *chip = container_of(dev, struct tpm_chip, dev);
>>
>> + down_write(&chip->ops_sem);
>> if (chip->flags & TPM_CHIP_FLAG_TPM2) {
>> down_write(&chip->ops_sem);
>> tpm2_shutdown(chip, TPM2_SU_CLEAR);
>> chip->ops = NULL;
>> up_write(&chip->ops_sem);
>> }
>> + chip->ops = NULL;
>> + up_write(&chip->ops_sem);
>
>This is wrong, it takes &chip->ops_sem twice, that can't be
>good. db4d8cb9c9f2af71c4d087817160d866ed572cc9 does not have that
>problem.
I agree. I've dropped it from 4.19 and 4.14.
Jarkko, can you take a look at this again please?
--
Thanks,
Sasha
On Mon, Sep 30, 2019 at 03:36:16PM +0800, Chao Yu wrote:
>Hello,
>
>On 2019/9/30 15:21, Pavel Machek wrote:
>> Hi!
>>
>>
>>> + for (blkofs += 1; blkofs < sbi->blocks_per_seg; blkofs++) {
>>> + if (!f2fs_test_bit(blkofs, se->cur_valid_map))
>>> + continue;
>>> +out:
>>> + f2fs_msg(sbi->sb, KERN_ERR,
>>> + "Current segment's next free block offset is "
>>> + "inconsistent with bitmap, logtype:%u, "
>>> + "segno:%u, type:%u, next_blkoff:%u, blkofs:%u",
>>> + i, curseg->segno, curseg->alloc_type,
>>> + curseg->next_blkoff, blkofs);
>>> + return -EINVAL;
>>> + }
>>
>> So this is detecting filesystem corruption, right? Should it be
>> -EUCLEAN?
>
>Was fixed in another commit 10f966bbf521 ("f2fs: use generic
>EFSBADCRC/EFSCORRUPTED"). :)
I've queued up a backport of this for 5.2, 4.19, and 4.14, thanks!.
--
Thanks,
Sasha
On 9/29/19 9:46 PM, Tetsuo Handa wrote:
> On 2019/09/30 9:28, Sasha Levin wrote:
>> On Sun, Sep 29, 2019 at 11:43:38PM +0900, Tetsuo Handa wrote:
>>> On 2019/09/29 22:54, Greg Kroah-Hartman wrote:
>>>> From: Waiman Long <[email protected]>
>>>>
>>>> [ Upstream commit 513e1073d52e55b8024b4f238a48de7587c64ccf ]
>>>>
>>>> Tetsuo Handa had reported he saw an incorrect "downgrading a read lock"
>>>> warning right after a previous lockdep warning. It is likely that the
>>>> previous warning turned off lock debugging causing the lockdep to have
>>>> inconsistency states leading to the lock downgrade warning.
>>>>
>>>> Fix that by add a check for debug_locks at the beginning of
>>>> __lock_downgrade().
>>> Please drop "[PATCH 4.19 36/63] locking/lockdep: Add debug_locks check in __lock_downgrade()".
>>> We had a revert patch shown below in the past.
>> We had a revert in the stable trees, but that revert was incorrect.
>>
>> Take a look at commit 513e1073d52e55 upstream, it patches
>> __lock_set_class() (even though the subject line says
>> __lock_downgrade()). So this is not a backporting error as the revert
>> said it is, but is rather the intended location to be patched.
>>
>> If this is actually wrong, then it should be addressed upstream first.
>>
> Hmm, upstream has two commits with same author, same date, same subject, different hash, different content.
> I couldn't find from https://lkml.kernel.org/r/[email protected] that
> we want to patch both __lock_set_class() and __lock_downgrade(), but I found that the tip-bot has patched
> __lock_downgrade() on "2019-01-21 11:29" and __lock_set_class() on "2019-02-04 8:56".
> Seems that we by error patched both functions, though patching both functions should be harmless...
>
> 64aa348ed kernel/lockdep.c (Peter Zijlstra 2008-08-11 09:30:21 +0200 4115) static int
> 00ef9f734 kernel/lockdep.c (Peter Zijlstra 2008-12-04 09:00:17 +0100 4116) __lock_set_class(struct lockdep_map *lock, const char *name,
> 00ef9f734 kernel/lockdep.c (Peter Zijlstra 2008-12-04 09:00:17 +0100 4117) struct lock_class_key *key, unsigned int subclass,
> 00ef9f734 kernel/lockdep.c (Peter Zijlstra 2008-12-04 09:00:17 +0100 4118) unsigned long ip)
> 64aa348ed kernel/lockdep.c (Peter Zijlstra 2008-08-11 09:30:21 +0200 4119) {
> 64aa348ed kernel/lockdep.c (Peter Zijlstra 2008-08-11 09:30:21 +0200 4120) struct task_struct *curr = current;
> 8c8889d8e kernel/locking/lockdep.c (Imre Deak 2019-05-24 23:15:08 +0300 4121) unsigned int depth, merged = 0;
> 41c2c5b86 kernel/locking/lockdep.c (J. R. Okajima 2017-02-03 01:38:15 +0900 4122) struct held_lock *hlock;
> 64aa348ed kernel/lockdep.c (Peter Zijlstra 2008-08-11 09:30:21 +0200 4123) struct lock_class *class;
> 64aa348ed kernel/lockdep.c (Peter Zijlstra 2008-08-11 09:30:21 +0200 4124) int i;
> 64aa348ed kernel/lockdep.c (Peter Zijlstra 2008-08-11 09:30:21 +0200 4125)
> 513e1073d kernel/locking/lockdep.c (Waiman Long 2019-01-09 23:03:25 -0500 4126) if (unlikely(!debug_locks))
> 513e1073d kernel/locking/lockdep.c (Waiman Long 2019-01-09 23:03:25 -0500 4127) return 0;
> 513e1073d kernel/locking/lockdep.c (Waiman Long 2019-01-09 23:03:25 -0500 4128)
>
> 6419c4af7 kernel/locking/lockdep.c (J. R. Okajima 2017-02-03 01:38:17 +0900 4162) static int __lock_downgrade(struct lockdep_map *lock, unsigned long ip)
> 6419c4af7 kernel/locking/lockdep.c (J. R. Okajima 2017-02-03 01:38:17 +0900 4163) {
> 6419c4af7 kernel/locking/lockdep.c (J. R. Okajima 2017-02-03 01:38:17 +0900 4164) struct task_struct *curr = current;
> 8c8889d8e kernel/locking/lockdep.c (Imre Deak 2019-05-24 23:15:08 +0300 4165) unsigned int depth, merged = 0;
> 6419c4af7 kernel/locking/lockdep.c (J. R. Okajima 2017-02-03 01:38:17 +0900 4166) struct held_lock *hlock;
> 6419c4af7 kernel/locking/lockdep.c (J. R. Okajima 2017-02-03 01:38:17 +0900 4167) int i;
> 6419c4af7 kernel/locking/lockdep.c (J. R. Okajima 2017-02-03 01:38:17 +0900 4168)
> 714925805 kernel/locking/lockdep.c (Waiman Long 2019-01-09 23:03:25 -0500 4169) if (unlikely(!debug_locks))
> 714925805 kernel/locking/lockdep.c (Waiman Long 2019-01-09 23:03:25 -0500 4170) return 0;
> 714925805 kernel/locking/lockdep.c (Waiman Long 2019-01-09 23:03:25 -0500 4171)
>
> commit 513e1073d52e55b8024b4f238a48de7587c64ccf
> Author: Waiman Long <[email protected]>
> Date: Wed Jan 9 23:03:25 2019 -0500
>
> locking/lockdep: Add debug_locks check in __lock_downgrade()
>
> commit 71492580571467fb7177aade19c18ce7486267f5
> Author: Waiman Long <[email protected]>
> Date: Wed Jan 9 23:03:25 2019 -0500
>
> locking/lockdep: Add debug_locks check in __lock_downgrade()
>
As I had said before, it looks like the git-apply mixed up the location
due to the fact that the hunks are exactly the same for both locations.
So if the patch to be applied does not have the right line number, it
will get applied to the wrong location first.
Cheers,
Longman
On Sun, Sep 29, 2019 at 11:43:38PM +0900, Tetsuo Handa wrote:
> On 2019/09/29 22:54, Greg Kroah-Hartman wrote:
> > From: Waiman Long <[email protected]>
> >
> > [ Upstream commit 513e1073d52e55b8024b4f238a48de7587c64ccf ]
> >
> > Tetsuo Handa had reported he saw an incorrect "downgrading a read lock"
> > warning right after a previous lockdep warning. It is likely that the
> > previous warning turned off lock debugging causing the lockdep to have
> > inconsistency states leading to the lock downgrade warning.
> >
> > Fix that by add a check for debug_locks at the beginning of
> > __lock_downgrade().
>
> Please drop "[PATCH 4.19 36/63] locking/lockdep: Add debug_locks check in __lock_downgrade()".
> We had a revert patch shown below in the past.
Ugh, I missed that, thanks.
> "[PATCH 4.19 37/63] locking/lockdep: Add debug_locks check in __lock_downgrade() - again" seems the correct patch.
Ok, will keep that one. And will drop the "again" part of that subject
line, had to add that to make quilt happy :(
thanks for the review.
greg k-h
On Sun, Sep 29, 2019 at 03:53:33PM +0200, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.19.76 release.
> There are 63 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Tue 01 Oct 2019 01:47:47 PM UTC.
> Anything received after that time might be too late.
>
Build results:
total: 156 pass: 156 fail: 0
Qemu test results:
total: 390 pass: 390 fail: 0
Guenter
On 9/29/19 7:53 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.19.76 release.
> There are 63 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Tue 01 Oct 2019 01:47:47 PM UTC.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.19.76-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.19.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
>
Compiled and booted on my test system. No dmesg regressions.
thanks,
-- Shuah
On Sun, Sep 29, 2019 at 03:53:33PM +0200, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.19.76 release.
> There are 63 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Tue 01 Oct 2019 01:47:47 PM UTC.
> Anything received after that time might be too late.
Results from Linaro’s test farm.
No regressions on arm64, arm, x86_64, and i386.
Summary
------------------------------------------------------------------------
kernel: 4.19.76-rc1
git repo: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
git branch: linux-4.19.y
git commit: b52c75f7b9785d0d0e6bf145787ed2fc99f5483c
git describe: v4.19.75-64-gb52c75f7b978
Test details: https://qa-reports.linaro.org/lkft/linux-stable-rc-4.19-oe/build/v4.19.75-64-gb52c75f7b978
No regressions (compared to build v4.19.75)
No fixes (compared to build v4.19.75)
Ran 23641 total tests in the following environments and test suites.
Environments
--------------
- dragonboard-410c - arm64
- hi6220-hikey - arm64
- i386
- juno-r2 - arm64
- qemu_arm
- qemu_arm64
- qemu_i386
- qemu_x86_64
- x15 - arm
- x86_64
Test Suites
-----------
* build
* install-android-platform-tools-r2600
* kselftest
* libhugetlbfs
* ltp-cap_bounds-tests
* ltp-commands-tests
* ltp-containers-tests
* ltp-cpuhotplug-tests
* ltp-cve-tests
* ltp-dio-tests
* ltp-fcntl-locktests-tests
* ltp-filecaps-tests
* ltp-fs_bind-tests
* ltp-fs_perms_simple-tests
* ltp-fsx-tests
* ltp-hugetlb-tests
* ltp-io-tests
* ltp-ipc-tests
* ltp-math-tests
* ltp-mm-tests
* ltp-nptl-tests
* ltp-pty-tests
* ltp-sched-tests
* ltp-securebits-tests
* ltp-syscalls-tests
* ltp-timers-tests
* perf
* spectre-meltdown-checker-test
* v4l2-compliance
* ltp-fs-tests
* network-basic-tests
* ltp-open-posix-tests
* kvm-unit-tests
* ssuite
* kselftest-vsyscall-mode-native
* kselftest-vsyscall-mode-none
--
Linaro LKFT
https://lkft.linaro.org
On 29/09/2019 14:53, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.19.76 release.
> There are 63 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Tue 01 Oct 2019 01:47:47 PM UTC.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.19.76-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.19.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
All tests are passing for Tegra ...
Test results for stable-v4.19:
12 builds: 12 pass, 0 fail
22 boots: 22 pass, 0 fail
32 tests: 32 pass, 0 fail
Linux version: 4.19.76-g555161ee1b7a
Boards tested: tegra124-jetson-tk1, tegra186-p2771-0000,
tegra194-p2972-0000, tegra20-ventana,
tegra210-p2371-2180, tegra30-cardhu-a04
Cheers
Jon
--
nvpublic
On Mon, Sep 30, 2019 at 08:57:12AM -0400, Sasha Levin wrote:
> On Mon, Sep 30, 2019 at 08:13:46AM +0200, Pavel Machek wrote:
> > > From: Vadim Sukhomlinov <[email protected]>
> > >
> > > commit db4d8cb9c9f2af71c4d087817160d866ed572cc9 upstream
> > >
> > > TPM 2.0 Shutdown involve sending TPM2_Shutdown to TPM chip and disabling
> > > future TPM operations. TPM 1.2 behavior was different, future TPM
> > > operations weren't disabled, causing rare issues. This patch ensures
> > > that future TPM operations are disabled.
> >
> > > diff --git a/drivers/char/tpm/tpm-chip.c b/drivers/char/tpm/tpm-chip.c
> > > index 46caadca916a0..dccc61af9ffab 100644
> > > --- a/drivers/char/tpm/tpm-chip.c
> > > +++ b/drivers/char/tpm/tpm-chip.c
> > > @@ -187,12 +187,15 @@ static int tpm_class_shutdown(struct device *dev)
> > > {
> > > struct tpm_chip *chip = container_of(dev, struct tpm_chip, dev);
> > >
> > > + down_write(&chip->ops_sem);
> > > if (chip->flags & TPM_CHIP_FLAG_TPM2) {
> > > down_write(&chip->ops_sem);
> > > tpm2_shutdown(chip, TPM2_SU_CLEAR);
> > > chip->ops = NULL;
> > > up_write(&chip->ops_sem);
> > > }
> > > + chip->ops = NULL;
> > > + up_write(&chip->ops_sem);
> >
> > This is wrong, it takes &chip->ops_sem twice, that can't be
> > good. db4d8cb9c9f2af71c4d087817160d866ed572cc9 does not have that
> > problem.
>
> I agree. I've dropped it from 4.19 and 4.14.
>
> Jarkko, can you take a look at this again please?
Pavel, thank you for spotting that one, phew!
I'll do an update.
/Jarkko
On Mon, Sep 30, 2019 at 10:00:35AM -0400, Waiman Long wrote:
>On 9/29/19 9:46 PM, Tetsuo Handa wrote:
>> On 2019/09/30 9:28, Sasha Levin wrote:
>>> On Sun, Sep 29, 2019 at 11:43:38PM +0900, Tetsuo Handa wrote:
>>>> On 2019/09/29 22:54, Greg Kroah-Hartman wrote:
>>>>> From: Waiman Long <[email protected]>
>>>>>
>>>>> [ Upstream commit 513e1073d52e55b8024b4f238a48de7587c64ccf ]
>>>>>
>>>>> Tetsuo Handa had reported he saw an incorrect "downgrading a read lock"
>>>>> warning right after a previous lockdep warning. It is likely that the
>>>>> previous warning turned off lock debugging causing the lockdep to have
>>>>> inconsistency states leading to the lock downgrade warning.
>>>>>
>>>>> Fix that by add a check for debug_locks at the beginning of
>>>>> __lock_downgrade().
>>>> Please drop "[PATCH 4.19 36/63] locking/lockdep: Add debug_locks check in __lock_downgrade()".
>>>> We had a revert patch shown below in the past.
>>> We had a revert in the stable trees, but that revert was incorrect.
>>>
>>> Take a look at commit 513e1073d52e55 upstream, it patches
>>> __lock_set_class() (even though the subject line says
>>> __lock_downgrade()). So this is not a backporting error as the revert
>>> said it is, but is rather the intended location to be patched.
>>>
>>> If this is actually wrong, then it should be addressed upstream first.
>>>
>> Hmm, upstream has two commits with same author, same date, same subject, different hash, different content.
>> I couldn't find from https://lkml.kernel.org/r/[email protected] that
>> we want to patch both __lock_set_class() and __lock_downgrade(), but I found that the tip-bot has patched
>> __lock_downgrade() on "2019-01-21 11:29" and __lock_set_class() on "2019-02-04 8:56".
>> Seems that we by error patched both functions, though patching both functions should be harmless...
>>
>> 64aa348ed kernel/lockdep.c (Peter Zijlstra 2008-08-11 09:30:21 +0200 4115) static int
>> 00ef9f734 kernel/lockdep.c (Peter Zijlstra 2008-12-04 09:00:17 +0100 4116) __lock_set_class(struct lockdep_map *lock, const char *name,
>> 00ef9f734 kernel/lockdep.c (Peter Zijlstra 2008-12-04 09:00:17 +0100 4117) struct lock_class_key *key, unsigned int subclass,
>> 00ef9f734 kernel/lockdep.c (Peter Zijlstra 2008-12-04 09:00:17 +0100 4118) unsigned long ip)
>> 64aa348ed kernel/lockdep.c (Peter Zijlstra 2008-08-11 09:30:21 +0200 4119) {
>> 64aa348ed kernel/lockdep.c (Peter Zijlstra 2008-08-11 09:30:21 +0200 4120) struct task_struct *curr = current;
>> 8c8889d8e kernel/locking/lockdep.c (Imre Deak 2019-05-24 23:15:08 +0300 4121) unsigned int depth, merged = 0;
>> 41c2c5b86 kernel/locking/lockdep.c (J. R. Okajima 2017-02-03 01:38:15 +0900 4122) struct held_lock *hlock;
>> 64aa348ed kernel/lockdep.c (Peter Zijlstra 2008-08-11 09:30:21 +0200 4123) struct lock_class *class;
>> 64aa348ed kernel/lockdep.c (Peter Zijlstra 2008-08-11 09:30:21 +0200 4124) int i;
>> 64aa348ed kernel/lockdep.c (Peter Zijlstra 2008-08-11 09:30:21 +0200 4125)
>> 513e1073d kernel/locking/lockdep.c (Waiman Long 2019-01-09 23:03:25 -0500 4126) if (unlikely(!debug_locks))
>> 513e1073d kernel/locking/lockdep.c (Waiman Long 2019-01-09 23:03:25 -0500 4127) return 0;
>> 513e1073d kernel/locking/lockdep.c (Waiman Long 2019-01-09 23:03:25 -0500 4128)
>>
>> 6419c4af7 kernel/locking/lockdep.c (J. R. Okajima 2017-02-03 01:38:17 +0900 4162) static int __lock_downgrade(struct lockdep_map *lock, unsigned long ip)
>> 6419c4af7 kernel/locking/lockdep.c (J. R. Okajima 2017-02-03 01:38:17 +0900 4163) {
>> 6419c4af7 kernel/locking/lockdep.c (J. R. Okajima 2017-02-03 01:38:17 +0900 4164) struct task_struct *curr = current;
>> 8c8889d8e kernel/locking/lockdep.c (Imre Deak 2019-05-24 23:15:08 +0300 4165) unsigned int depth, merged = 0;
>> 6419c4af7 kernel/locking/lockdep.c (J. R. Okajima 2017-02-03 01:38:17 +0900 4166) struct held_lock *hlock;
>> 6419c4af7 kernel/locking/lockdep.c (J. R. Okajima 2017-02-03 01:38:17 +0900 4167) int i;
>> 6419c4af7 kernel/locking/lockdep.c (J. R. Okajima 2017-02-03 01:38:17 +0900 4168)
>> 714925805 kernel/locking/lockdep.c (Waiman Long 2019-01-09 23:03:25 -0500 4169) if (unlikely(!debug_locks))
>> 714925805 kernel/locking/lockdep.c (Waiman Long 2019-01-09 23:03:25 -0500 4170) return 0;
>> 714925805 kernel/locking/lockdep.c (Waiman Long 2019-01-09 23:03:25 -0500 4171)
>>
>> commit 513e1073d52e55b8024b4f238a48de7587c64ccf
>> Author: Waiman Long <[email protected]>
>> Date: Wed Jan 9 23:03:25 2019 -0500
>>
>> locking/lockdep: Add debug_locks check in __lock_downgrade()
>>
>> commit 71492580571467fb7177aade19c18ce7486267f5
>> Author: Waiman Long <[email protected]>
>> Date: Wed Jan 9 23:03:25 2019 -0500
>>
>> locking/lockdep: Add debug_locks check in __lock_downgrade()
>>
>As I had said before, it looks like the git-apply mixed up the location
>due to the fact that the hunks are exactly the same for both locations.
>So if the patch to be applied does not have the right line number, it
>will get applied to the wrong location first.
I very much agree, my point is that *both* patches are upstream right
now, and if one of those patches is wrong then it should be reverted
upstream, and we'd be happy to take the revert.
--
Thanks,
Sasha
On 10/1/19 6:20 PM, Sasha Levin wrote:
> On Mon, Sep 30, 2019 at 10:00:35AM -0400, Waiman Long wrote:
>> On 9/29/19 9:46 PM, Tetsuo Handa wrote:
>>> On 2019/09/30 9:28, Sasha Levin wrote:
>>>> On Sun, Sep 29, 2019 at 11:43:38PM +0900, Tetsuo Handa wrote:
>>>>> On 2019/09/29 22:54, Greg Kroah-Hartman wrote:
>>>>>> From: Waiman Long <[email protected]>
>>>>>>
>>>>>> [ Upstream commit 513e1073d52e55b8024b4f238a48de7587c64ccf ]
>>>>>>
>>>>>> Tetsuo Handa had reported he saw an incorrect "downgrading a read
>>>>>> lock"
>>>>>> warning right after a previous lockdep warning. It is likely that
>>>>>> the
>>>>>> previous warning turned off lock debugging causing the lockdep to
>>>>>> have
>>>>>> inconsistency states leading to the lock downgrade warning.
>>>>>>
>>>>>> Fix that by add a check for debug_locks at the beginning of
>>>>>> __lock_downgrade().
>>>>> Please drop "[PATCH 4.19 36/63] locking/lockdep: Add debug_locks
>>>>> check in __lock_downgrade()".
>>>>> We had a revert patch shown below in the past.
>>>> We had a revert in the stable trees, but that revert was incorrect.
>>>>
>>>> Take a look at commit 513e1073d52e55 upstream, it patches
>>>> __lock_set_class() (even though the subject line says
>>>> __lock_downgrade()). So this is not a backporting error as the revert
>>>> said it is, but is rather the intended location to be patched.
>>>>
>>>> If this is actually wrong, then it should be addressed upstream first.
>>>>
>>> Hmm, upstream has two commits with same author, same date, same
>>> subject, different hash, different content.
>>> I couldn't find from
>>> https://lkml.kernel.org/r/[email protected]
>>> that
>>> we want to patch both __lock_set_class() and __lock_downgrade(), but
>>> I found that the tip-bot has patched
>>> __lock_downgrade() on "2019-01-21 11:29" and __lock_set_class() on
>>> "2019-02-04 8:56".
>>> Seems that we by error patched both functions, though patching both
>>> functions should be harmless...
>>>
>>> 64aa348ed kernel/lockdep.c (Peter Zijlstra
>>> 2008-08-11 09:30:21 +0200 4115) static int
>>> 00ef9f734 kernel/lockdep.c (Peter Zijlstra
>>> 2008-12-04 09:00:17 +0100 4116) __lock_set_class(struct lockdep_map
>>> *lock, const char *name,
>>> 00ef9f734 kernel/lockdep.c (Peter Zijlstra
>>> 2008-12-04 09:00:17 +0100 4117) struct lock_class_key
>>> *key, unsigned int subclass,
>>> 00ef9f734 kernel/lockdep.c (Peter Zijlstra
>>> 2008-12-04 09:00:17 +0100 4118) unsigned long ip)
>>> 64aa348ed kernel/lockdep.c (Peter Zijlstra
>>> 2008-08-11 09:30:21 +0200 4119) {
>>> 64aa348ed kernel/lockdep.c (Peter Zijlstra
>>> 2008-08-11 09:30:21 +0200 4120) struct task_struct *curr = current;
>>> 8c8889d8e kernel/locking/lockdep.c (Imre Deak
>>> 2019-05-24 23:15:08 +0300 4121) unsigned int depth, merged = 0;
>>> 41c2c5b86 kernel/locking/lockdep.c (J. R. Okajima
>>> 2017-02-03 01:38:15 +0900 4122) struct held_lock *hlock;
>>> 64aa348ed kernel/lockdep.c (Peter Zijlstra
>>> 2008-08-11 09:30:21 +0200 4123) struct lock_class *class;
>>> 64aa348ed kernel/lockdep.c (Peter Zijlstra
>>> 2008-08-11 09:30:21 +0200 4124) int i;
>>> 64aa348ed kernel/lockdep.c (Peter Zijlstra
>>> 2008-08-11 09:30:21 +0200 4125)
>>> 513e1073d kernel/locking/lockdep.c (Waiman Long
>>> 2019-01-09 23:03:25 -0500 4126) if (unlikely(!debug_locks))
>>> 513e1073d kernel/locking/lockdep.c (Waiman Long
>>> 2019-01-09 23:03:25 -0500 4127) return 0;
>>> 513e1073d kernel/locking/lockdep.c (Waiman Long
>>> 2019-01-09 23:03:25 -0500 4128)
>>>
>>> 6419c4af7 kernel/locking/lockdep.c (J. R. Okajima
>>> 2017-02-03 01:38:17 +0900 4162) static int __lock_downgrade(struct
>>> lockdep_map *lock, unsigned long ip)
>>> 6419c4af7 kernel/locking/lockdep.c (J. R. Okajima
>>> 2017-02-03 01:38:17 +0900 4163) {
>>> 6419c4af7 kernel/locking/lockdep.c (J. R. Okajima
>>> 2017-02-03 01:38:17 +0900 4164) struct task_struct *curr = current;
>>> 8c8889d8e kernel/locking/lockdep.c (Imre Deak
>>> 2019-05-24 23:15:08 +0300 4165) unsigned int depth, merged = 0;
>>> 6419c4af7 kernel/locking/lockdep.c (J. R. Okajima
>>> 2017-02-03 01:38:17 +0900 4166) struct held_lock *hlock;
>>> 6419c4af7 kernel/locking/lockdep.c (J. R. Okajima
>>> 2017-02-03 01:38:17 +0900 4167) int i;
>>> 6419c4af7 kernel/locking/lockdep.c (J. R. Okajima
>>> 2017-02-03 01:38:17 +0900 4168)
>>> 714925805 kernel/locking/lockdep.c (Waiman Long
>>> 2019-01-09 23:03:25 -0500 4169) if (unlikely(!debug_locks))
>>> 714925805 kernel/locking/lockdep.c (Waiman Long
>>> 2019-01-09 23:03:25 -0500 4170) return 0;
>>> 714925805 kernel/locking/lockdep.c (Waiman Long
>>> 2019-01-09 23:03:25 -0500 4171)
>>>
>>> commit 513e1073d52e55b8024b4f238a48de7587c64ccf
>>> Author: Waiman Long <[email protected]>
>>> Date: Wed Jan 9 23:03:25 2019 -0500
>>>
>>> locking/lockdep: Add debug_locks check in __lock_downgrade()
>>>
>>> commit 71492580571467fb7177aade19c18ce7486267f5
>>> Author: Waiman Long <[email protected]>
>>> Date: Wed Jan 9 23:03:25 2019 -0500
>>>
>>> locking/lockdep: Add debug_locks check in __lock_downgrade()
>>>
>> As I had said before, it looks like the git-apply mixed up the location
>> due to the fact that the hunks are exactly the same for both locations.
>> So if the patch to be applied does not have the right line number, it
>> will get applied to the wrong location first.
>
> I very much agree, my point is that *both* patches are upstream right
> now, and if one of those patches is wrong then it should be reverted
> upstream, and we'd be happy to take the revert.
The patch itself shouldn't do any harm even if it is applied to the
wrong function. So there is no urgency to revert it.
Cheers,
Longman