In function `ehci_brcm_hub_control`, like following code,
it filters out the case where the upper byte of wIndex is nonzero,
so it need be replaced with temp.
```
if ((typeReq == GetPortStatus) &&
(wIndex && wIndex <= ports) && // need to be replaced
ehci->reset_done[wIndex-1] &&
time_after_eq(jiffies, ehci->reset_done[wIndex-1]) &&
(ehci_readl(ehci, status_reg) & PORT_RESUME)) {
```
Signed-off-by: Haimin Zhang <[email protected]>
Reported-by: TCS Robot <[email protected]>
---
drivers/usb/host/ehci-brcm.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/usb/host/ehci-brcm.c b/drivers/usb/host/ehci-brcm.c
index a1e3290e5459..efcfca162126 100644
--- a/drivers/usb/host/ehci-brcm.c
+++ b/drivers/usb/host/ehci-brcm.c
@@ -73,9 +73,9 @@ static int ehci_brcm_hub_control(
* of RESUME
*/
if ((typeReq == GetPortStatus) &&
- (wIndex && wIndex <= ports) &&
- ehci->reset_done[wIndex-1] &&
- time_after_eq(jiffies, ehci->reset_done[wIndex-1]) &&
+ (temp < ports) &&
+ ehci->reset_done[temp] &&
+ time_after_eq(jiffies, ehci->reset_done[temp]) &&
(ehci_readl(ehci, status_reg) & PORT_RESUME)) {
/*
--
2.30.1 (Apple Git-130)
On Fri, Nov 05, 2021 at 04:33:57PM +0800, Haimin Zhang wrote:
> In function `ehci_brcm_hub_control`, like following code,
> it filters out the case where the upper byte of wIndex is nonzero,
> so it need be replaced with temp.
I do not understand this text, can you try to reword it?
And you have trailing whitespace.
And why use `?
> ```
What is this for? Changelog comments are not in markdown format.
> if ((typeReq == GetPortStatus) &&
> (wIndex && wIndex <= ports) && // need to be replaced
What does this comment mean?
> ehci->reset_done[wIndex-1] &&
> time_after_eq(jiffies, ehci->reset_done[wIndex-1]) &&
> (ehci_readl(ehci, status_reg) & PORT_RESUME)) {
> ```
>
> Signed-off-by: Haimin Zhang <[email protected]>
> Reported-by: TCS Robot <[email protected]>
Again, lines need to be in different order, and your from: line is not
correct.
Also, you need an individual email address, not a group email alias for
your contributions. We work with individuals, not groups.
> ---
> drivers/usb/host/ehci-brcm.c | 6 +++---
> 1 file changed, 3 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/usb/host/ehci-brcm.c b/drivers/usb/host/ehci-brcm.c
> index a1e3290e5459..efcfca162126 100644
> --- a/drivers/usb/host/ehci-brcm.c
> +++ b/drivers/usb/host/ehci-brcm.c
> @@ -73,9 +73,9 @@ static int ehci_brcm_hub_control(
> * of RESUME
> */
> if ((typeReq == GetPortStatus) &&
> - (wIndex && wIndex <= ports) &&
> - ehci->reset_done[wIndex-1] &&
> - time_after_eq(jiffies, ehci->reset_done[wIndex-1]) &&
> + (temp < ports) &&
Where did temp come from?
thanks,
greg k-h
On Fri, Nov 05, 2021 at 09:52:13AM +0100, Greg KH wrote:
> On Fri, Nov 05, 2021 at 04:33:57PM +0800, Haimin Zhang wrote:
> > In function `ehci_brcm_hub_control`, like following code,
> > it filters out the case where the upper byte of wIndex is nonzero,
> > so it need be replaced with temp.
>
> I do not understand this text, can you try to reword it?
>
> And you have trailing whitespace.
>
> And why use `?
>
> > ```
>
> What is this for? Changelog comments are not in markdown format.
>
> > if ((typeReq == GetPortStatus) &&
> > (wIndex && wIndex <= ports) && // need to be replaced
>
> What does this comment mean?
>
> > ehci->reset_done[wIndex-1] &&
> > time_after_eq(jiffies, ehci->reset_done[wIndex-1]) &&
> > (ehci_readl(ehci, status_reg) & PORT_RESUME)) {
> > ```
> >
> > Signed-off-by: Haimin Zhang <[email protected]>
> > Reported-by: TCS Robot <[email protected]>
>
> Again, lines need to be in different order, and your from: line is not
> correct.
>
> Also, you need an individual email address, not a group email alias for
> your contributions. We work with individuals, not groups.
>
>
>
> > ---
> > drivers/usb/host/ehci-brcm.c | 6 +++---
> > 1 file changed, 3 insertions(+), 3 deletions(-)
> >
> > diff --git a/drivers/usb/host/ehci-brcm.c b/drivers/usb/host/ehci-brcm.c
> > index a1e3290e5459..efcfca162126 100644
> > --- a/drivers/usb/host/ehci-brcm.c
> > +++ b/drivers/usb/host/ehci-brcm.c
> > @@ -73,9 +73,9 @@ static int ehci_brcm_hub_control(
> > * of RESUME
> > */
> > if ((typeReq == GetPortStatus) &&
> > - (wIndex && wIndex <= ports) &&
> > - ehci->reset_done[wIndex-1] &&
> > - time_after_eq(jiffies, ehci->reset_done[wIndex-1]) &&
> > + (temp < ports) &&
>
> Where did temp come from?
Also, as long as this piece of code is being changed, it would be a good
idea to get rid of all the unnecessary parentheses.
Alan Stern
On 11/5/21 1:52 AM, Greg KH wrote:
> On Fri, Nov 05, 2021 at 04:33:57PM +0800, Haimin Zhang wrote:
>> In function `ehci_brcm_hub_control`, like following code,
>> it filters out the case where the upper byte of wIndex is nonzero,
>> so it need be replaced with temp.
>
> I do not understand this text, can you try to reword it?
>
> And you have trailing whitespace.
>
> And why use `?
>
>> ```
>
> What is this for? Changelog comments are not in markdown format.
>
>> if ((typeReq == GetPortStatus) &&
>> (wIndex && wIndex <= ports) && // need to be replaced
>
> What does this comment mean?
>
>> ehci->reset_done[wIndex-1] &&
>> time_after_eq(jiffies, ehci->reset_done[wIndex-1]) &&
>> (ehci_readl(ehci, status_reg) & PORT_RESUME)) {
>> ```
>>
>> Signed-off-by: Haimin Zhang <[email protected]>
>> Reported-by: TCS Robot <[email protected]>
>
> Again, lines need to be in different order, and your from: line is not
> correct.
>
> Also, you need an individual email address, not a group email alias for
> your contributions. We work with individuals, not groups.
Also, would you mind copying the people who are remotely involved with
this piece of code, like Al? Thank you
--
Florian