This is the start of the stable review cycle for the 4.9.203 release.
There are 222 patches in this series, all will be posted as a response
to this one. If anyone has any issues with these being applied, please
let me know.
Responses should be made by Sun, 24 Nov 2019 09:59:19 +0000.
Anything received after that time might be too late.
The whole patch series can be found in one patch at:
https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.9.203-rc1.gz
or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.9.y
and the diffstat can be found below.
thanks,
greg k-h
-------------
Pseudo-Shortlog of commits:
Greg Kroah-Hartman <[email protected]>
Linux 4.9.203-rc1
Pavel Tatashin <[email protected]>
arm64: uaccess: Ensure PAN is re-enabled after unhandled uaccess fault
Roger Quadros <[email protected]>
ARM: dts: omap5: Fix dual-role mode on Super-Speed port
Huibin Hong <[email protected]>
spi: rockchip: initialize dma_slave_config properly
Felix Fietkau <[email protected]>
mac80211: minstrel: fix CCK rate group streams value
zhong jiang <[email protected]>
misc: cxl: Fix possible null pointer dereference
Nicolin Chen <[email protected]>
hwmon: (ina3221) Fix INA3221_CONFIG_MODE macros
Thierry Reding <[email protected]>
hwmon: (pwm-fan) Silence error on probe deferral
Colin Ian King <[email protected]>
orangefs: rate limit the client not running info message
Timothy E Baldwin <[email protected]>
ARM: 8802/1: Call syscall_trace_exit even when system call skipped
Trent Piepho <[email protected]>
spi: spidev: Fix OF tree warning logic
Marek Vasut <[email protected]>
gpio: syscon: Fix possible NULL ptr usage
Bjorn Helgaas <[email protected]>
x86/kexec: Correct KEXEC_BACKUP_SRC_END off-by-one error
Colin Ian King <[email protected]>
media: cx231xx: fix potential sign-extension overflow on large shift
Tim Smith <[email protected]>
GFS2: Flush the GFS2 delete workqueue before stopping the kernel threads
Wenwen Wang <[email protected]>
media: isif: fix a NULL pointer dereference bug
He Zhe <[email protected]>
printk: Give error on attempt to set log buffer length to over 2G
Vignesh R <[email protected]>
mfd: ti_am335x_tscadc: Keep ADC interface on if child is wakeup capable
Nathan Chancellor <[email protected]>
backlight: lm3639: Unconditionally call led_classdev_unregister
Borislav Petkov <[email protected]>
proc/vmcore: Fix i386 build error of missing copy_oldmem_page_encrypted()
Vasily Gorbik <[email protected]>
s390/kasan: avoid vdso instrumentation
Shenghui Wang <[email protected]>
bcache: recal cached_dev_sectors on detach
Geert Uytterhoeven <[email protected]>
reset: Fix potential use-after-free in __of_reset_control_get()
Dan Carpenter <[email protected]>
fbdev: sbuslib: integer overflow in sbusfb_ioctl_helper()
Dan Carpenter <[email protected]>
fbdev: sbuslib: use checked version of put_user()
Sara Sharon <[email protected]>
iwlwifi: mvm: don't send keys when entering D3
Ronald Tschalär <[email protected]>
ACPI / SBS: Fix rare oops when removing modules
Radu Solea <[email protected]>
crypto: mxs-dcp - Fix AES issues
Radu Solea <[email protected]>
crypto: mxs-dcp - Fix SHA null hashes and output length
Borislav Petkov <[email protected]>
x86/olpc: Fix build error with CONFIG_MFD_CS5535=m
Julian Sax <[email protected]>
Input: silead - try firmware reload after unsuccessful resume
Martin Kepplinger <[email protected]>
Input: st1232 - set INPUT_PROP_DIRECT property
Rami Rosen <[email protected]>
dmaengine: ioat: fix prototype of ioat_enumerate_channels
Olga Kornievskaia <[email protected]>
NFSv4.x: fix lock recovery during delegation recall
Florian Fainelli <[email protected]>
i2c: brcmstb: Allow enabling the driver on DSL SoCs
Marek Szyprowski <[email protected]>
clk: samsung: Use clk_hw API for calling clk framework from clk notifiers
Chung-Hsien Hsu <[email protected]>
brcmfmac: fix full timeout waiting for action frame on-channel tx
Chung-Hsien Hsu <[email protected]>
brcmfmac: reduce timeout for action frame scan
Borislav Petkov <[email protected]>
cpu/SMT: State SMT is disabled even with nosmt and without "=force"
Ricardo Ribalda Delgado <[email protected]>
mtd: physmap_of: Release resources on error
Johan Hovold <[email protected]>
USB: serial: cypress_m8: fix interrupt-out transfer length
Cameron Kaiser <[email protected]>
KVM: PPC: Book3S PR: Exiting split hack mode needs to fixup both PC and LR
Michael Pobega <[email protected]>
ALSA: hda/sigmatel - Disable automute for Elo VuPoint
Nathan Chancellor <[email protected]>
media: pxa_camera: Fix check for pdev->dev.of_node
Nathan Chancellor <[email protected]>
ata: ep93xx: Use proper enums for directions
Bob Moore <[email protected]>
ACPICA: Never run _REG on system_memory and system_IO
Nathan Chancellor <[email protected]>
IB/mlx4: Avoid implicit enumerated type conversion
Wei Yongjun <[email protected]>
IB/mthca: Fix error return code in __mthca_init_one()
Radoslaw Tyl <[email protected]>
ixgbe: Fix crash with VFs and flow director on interface flap
Nathan Chancellor <[email protected]>
mtd: rawnand: sh_flctl: Use proper enum for flctl_dma_fifo0_transfer
Naveen N. Rao <[email protected]>
powerpc/pseries: Fix how we iterate over the DTL entries
Naveen N. Rao <[email protected]>
powerpc/pseries: Fix DTL buffer registration
Nathan Chancellor <[email protected]>
cxgb4: Use proper enum in IEEE_FAUX_SYNC
Nathan Chancellor <[email protected]>
cxgb4: Use proper enum in cxgb4_dcb_handle_fw_update
Dan Carpenter <[email protected]>
mei: samples: fix a signedness bug in amt_host_if_call()
Nathan Chancellor <[email protected]>
dmaengine: timb_dma: Use proper enum in td_prep_slave_sg
Nathan Chancellor <[email protected]>
dmaengine: ep93xx: Return proper enum in ep93xx_dma_chan_direction
Andrew Zaborowski <[email protected]>
nl80211: Fix a GET_KEY reply attribute
Jia-Ju Bai <[email protected]>
usb: gadget: udc: fotg210-udc: Fix a sleep-in-atomic-context bug in fotg210_get_status()
Simon Wunderlich <[email protected]>
ath9k: fix reporting calculated new FFT upper max
Florian Fainelli <[email protected]>
ata: ahci_brcm: Allow using driver or DSL SoCs
Ben Greear <[email protected]>
ath10k: fix vdev-start timeout on error
Anshuman Khandual <[email protected]>
arm64/numa: Report correct memblock range for the dummy node
Suzuki K Poulose <[email protected]>
kvm: arm/arm64: Fix stage2_flush_memslot for 4 level page table
Trond Myklebust <[email protected]>
SUNRPC: Fix priority queue fairness
Jaegeuk Kim <[email protected]>
f2fs: return correct errno in f2fs_gc
H. Nikolaus Schaller <[email protected]>
ARM: dts: omap5: enable OTG role for DWC3 controller
YueHaibing <[email protected]>
net: xen-netback: fix return type of ndo_start_xmit function
YueHaibing <[email protected]>
net: ovs: fix return type of ndo_start_xmit function
Jens Axboe <[email protected]>
libata: have ata_scsi_rw_xlat() fail invalid passthrough requests
Christoph Hellwig <[email protected]>
block: introduce blk_rq_is_passthrough
Daniel Vetter <[email protected]>
fbdev: Ditch fb_edid_add_monspecs
Masami Hiramatsu <[email protected]>
uprobes/x86: Prohibit probing on MOV SS instruction
Masami Hiramatsu <[email protected]>
kprobes/x86: Prohibit probing on exception masking instructions
Peter Zijlstra <[email protected]>
x86/atomic: Fix smp_mb__{before,after}_atomic()
Dan Carpenter <[email protected]>
net: cdc_ncm: Signedness bug in cdc_ncm_set_dgram_size()
Jouni Hogander <[email protected]>
slcan: Fix memory leak in error path
zhong jiang <[email protected]>
memfd: Use radix_tree_deref_slot_protected to avoid the warning.
Israel Rukshin <[email protected]>
IB/iser: Fix possible NULL deref at iser_inv_desc()
Kirill Tkhai <[email protected]>
fuse: use READ_ONCE on congestion_threshold and max_background
Chunfeng Yun <[email protected]>
usb: xhci-mtk: fix ISOC error when interval is zero
Rob Herring <[email protected]>
ARM: dts: lpc32xx: Fix SPI controller node names
Rob Herring <[email protected]>
arm64: dts: lg: Fix SPI controller node names
Rob Herring <[email protected]>
arm64: dts: amd: Fix SPI bus warnings
Finn Thain <[email protected]>
scsi: NCR5380: Handle BUS FREE during reselection
Finn Thain <[email protected]>
scsi: NCR5380: Don't call dsprintk() following reselection interrupt
Finn Thain <[email protected]>
scsi: NCR5380: Don't clear busy flag when abort fails
Finn Thain <[email protected]>
scsi: NCR5380: Check for invalid reselection target
Finn Thain <[email protected]>
scsi: NCR5380: Use DRIVER_SENSE to indicate valid sense data
Hannes Reinecke <[email protected]>
scsi: NCR5380: Clear all unissued commands on host reset
Dan Aloni <[email protected]>
crypto: fix a memory leak in rsa-kcs1pad's encryption mode
Christoph Manszewski <[email protected]>
crypto: s5p-sss: Fix Fix argument list alignment
Luiz Augusto von Dentz <[email protected]>
Bluetooth: L2CAP: Detect if remote is not able to use the whole MPS
Rob Herring <[email protected]>
ARM: dts: realview: Fix SPI controller node names
Justin Ernst <[email protected]>
EDAC: Raise the maximum number of memory controllers
YueHaibing <[email protected]>
net: smsc: fix return type of ndo_start_xmit function
Marc Dietrich <[email protected]>
ARM: dts: paz00: fix wakeup gpio keycode
Marcel Ziswiler <[email protected]>
ARM: tegra: apalis_t30: fix mmc1 cmd pull-up
Marcel Ziswiler <[email protected]>
ARM: dts: tegra30: fix xcvr-setup-use-fuses
Jason Yan <[email protected]>
scsi: libsas: always unregister the old device if going to discover new
Alex Williamson <[email protected]>
vfio/pci: Mask buggy SR-IOV VF INTx support
Li Qiang <[email protected]>
vfio/pci: Fix potential memory leak in vfio_msi_cap_len
zhong jiang <[email protected]>
misc: genwqe: should return proper error value.
Laura Abbott <[email protected]>
misc: kgdbts: Fix restrict error
Leo Yan <[email protected]>
coresight: tmc: Fix byte-address alignment for RRP
Tomasz Nowicki <[email protected]>
coresight: etm4x: Configure EL2 exception level when kernel is running in HYP
Suzuki K Poulose <[email protected]>
coresight: Fix handling of sinks
Laurent Pinchart <[email protected]>
usb: gadget: uvc: Only halt video streaming endpoint in bulk mode
Laurent Pinchart <[email protected]>
usb: gadget: uvc: Factor out video USB request queueing
Andreas Kemnade <[email protected]>
phy: phy-twl4030-usb: fix denied runtime access
Joel Pepper <[email protected]>
usb: gadget: uvc: configfs: Prevent format changes after linking header
Laurent Pinchart <[email protected]>
usb: gadget: uvc: configfs: Drop leaked references to config items
Nathan Chancellor <[email protected]>
media: davinci: Fix implicit enum conversion warning
Brad Love <[email protected]>
media: au0828: Fix incorrect error messages
Jia-Ju Bai <[email protected]>
media: pci: ivtv: Fix a sleep-in-atomic-context bug in ivtv_yuv_init()
Dengcheng Zhu <[email protected]>
MIPS: kexec: Relax memory restriction
Matthew Whitehead <[email protected]>
x86/CPU: Use correct macros for Cyrix calls
YueHaibing <[email protected]>
net: micrel: fix return type of ndo_start_xmit function
Shahed Shaikh <[email protected]>
bnx2x: Ignore bandwidth attention in single function mode
Rob Herring <[email protected]>
ARM: dts: marvell: Fix SPI and I2C bus warnings
Stefan Agner <[email protected]>
cpufeature: avoid warning when compiling with clang
Nathan Chancellor <[email protected]>
spi: pic32: Use proper enum in dmaengine_prep_slave_rg
Rob Herring <[email protected]>
ARM: dts: ste: Fix SPI controller node names
Linus Walleij <[email protected]>
ARM: dts: ux500: Fix LCDA clock line muxing
Geert Uytterhoeven <[email protected]>
ARM: dts: ux500: Correct SCU unit address
Chao Yu <[email protected]>
f2fs: fix to recover inode's uid/gid during POR
Grygorii Strashko <[email protected]>
ARM: dts: am335x-evm: fix number of cpsw
Petr Machata <[email protected]>
mlxsw: spectrum: Init shaper for TCs 8..15
Loic Poulain <[email protected]>
usb: chipidea: Fix otg event handler
Nicolas Adell <[email protected]>
usb: chipidea: imx: enable OTG overcurrent in case USB subsystem is already started
YueHaibing <[email protected]>
net: amd: fix return type of ndo_start_xmit function
YueHaibing <[email protected]>
net: broadcom: fix return type of ndo_start_xmit function
YueHaibing <[email protected]>
net: xilinx: fix return type of ndo_start_xmit function
YueHaibing <[email protected]>
net: toshiba: fix return type of ndo_start_xmit function
Andreas Kemnade <[email protected]>
power: supply: twl4030_charger: disable eoc interrupt on linear charge
Andreas Kemnade <[email protected]>
power: supply: twl4030_charger: fix charging current out-of-bounds
Rob Herring <[email protected]>
libfdt: Ensure INT_MAX is defined in libfdt_env.h
Håkon Bugge <[email protected]>
RDMA/i40iw: Fix incorrect iterator type
Nathan Fontenot <[email protected]>
powerpc/pseries: Disable CPU hotplug across migrations
Nicholas Piggin <[email protected]>
powerpc/64s/hash: Fix stab_rr off by one initialization
Breno Leitao <[email protected]>
powerpc/iommu: Avoid derefence before pointer check
Anton Vasilyev <[email protected]>
serial: mxs-auart: Fix potential infinite loop
Sinan Kaya <[email protected]>
PCI/ACPI: Correct error message for ASPM disabling
Julian Wiedmann <[email protected]>
s390/qeth: invoke softirqs after napi_schedule()
Dan Carpenter <[email protected]>
ath9k: Fix a locking bug in ath9k_add_interface()
Rob Herring <[email protected]>
ARM: dts: rockchip: Fix erroneous SPI bus dtc warnings on rk3036
Haishuang Yan <[email protected]>
ip_gre: fix parsing gre header in ipgre_err
Bernd Edlinger <[email protected]>
kernfs: Fix range checks in kernfs_get_target_path
Banajit Goswami <[email protected]>
component: fix loop condition to call unbind() if bind() fails
Tomasz Figa <[email protected]>
power: supply: max8998-charger: Fix platform data retrieval
Claudiu Beznea <[email protected]>
power: reset: at91-poweroff: do not procede if at91_shdwc is allocated
Dan Carpenter <[email protected]>
power: supply: ab8500_fg: silence uninitialized variable warnings
Ganesh Goudar <[email protected]>
cxgb4: Fix endianness issue in t4_fwcache()
Ludovic Desroches <[email protected]>
pinctrl: at91: don't use the same irqchip with multiple gpiochips
Dinh Nguyen <[email protected]>
ARM: dts: socfpga: Fix I2C bus unit-address error
Alan Modra <[email protected]>
powerpc/vdso: Correct call frame information
Christian Lamparter <[email protected]>
ARM: dts: qcom: ipq4019: fix cpu0's qcom,saw2 reg value
Cong Wang <[email protected]>
llc: avoid blocking in llc_sap_close()
Dan Carpenter <[email protected]>
pinctrl: at91-pio4: fix has_config check in atmel_pctl_dt_subnode_to_map()
Takashi Iwai <[email protected]>
ALSA: intel8x0m: Register irq handler after register initializations
Arnd Bergmann <[email protected]>
media: dvb: fix compat ioctl translation
Lao Wei <[email protected]>
media: fix: media: pci: meye: validate offset to avoid arbitrary access
Srinivas Kandagatla <[email protected]>
nvmem: core: return error code instead of NULL from nvmem_device_get
Masami Hiramatsu <[email protected]>
kprobes: Don't call BUG_ON() if there is a kprobe in use on free list
Deepak Ukey <[email protected]>
scsi: pm80xx: Fixed system hang issue during kexec boot
Deepak Ukey <[email protected]>
scsi: pm80xx: Corrected dma_unmap_sg() parameter
Oleksij Rempel <[email protected]>
ARM: imx6: register pm_power_off handler if "fsl,pmic-stby-poweroff" is set
George Kennedy <[email protected]>
scsi: sym53c8xx: fix NULL pointer dereference panic in sym_int_sir()
Chao Yu <[email protected]>
f2fs: fix memory leak of percpu counter in fill_super()
Eric W. Biederman <[email protected]>
signal: Properly deliver SIGSEGV from x86 uprobes
Eric W. Biederman <[email protected]>
signal: Properly deliver SIGILL from uprobes
Eric W. Biederman <[email protected]>
signal: Always ignore SIGKILL and SIGSTOP sent to the global init
Felix Fietkau <[email protected]>
ath9k: add back support for using active monitor interfaces for tx99
Daniel Silsby <[email protected]>
dmaengine: dma-jz4780: Further residue status fix
Paul Cercueil <[email protected]>
dmaengine: dma-jz4780: Don't depend on MACH_JZ4780
H. Nikolaus Schaller <[email protected]>
ARM: dts: omap3-gta04: keep vpll2 always on
H. Nikolaus Schaller <[email protected]>
ARM: dts: omap3-gta04: make NAND partitions compatible with recent U-Boot
H. Nikolaus Schaller <[email protected]>
ARM: dts: omap3-gta04: fix touchscreen tsc2007
H. Nikolaus Schaller <[email protected]>
ARM: dts: omap3-gta04: tvout: enable as display1 alias
H. Nikolaus Schaller <[email protected]>
ARM: dts: omap3-gta04: fixes for tvout / venc
H. Nikolaus Schaller <[email protected]>
ARM: dts: omap3-gta04: give spi_lcd node a label so that we can overwrite in other DTS files
Rob Herring <[email protected]>
of: make PowerMac cache node search conditional on CONFIG_PPC_PMAC
Yong Zhi <[email protected]>
ASoC: Intel: hdac_hdmi: Limit sampling rates at dai creation
Ding Xiang <[email protected]>
mips: txx9: fix iounmap related issue
Erik Stromdahl <[email protected]>
ath10k: wmi: disable softirq's while calling ieee80211_rx
Marek Szyprowski <[email protected]>
ARM: dts: exynos: Disable pull control for S5M8767 PMIC
Colin Ian King <[email protected]>
ASoC: sgtl5000: avoid division by zero if lo_vag is zero
Stefan Wahren <[email protected]>
net: lan78xx: Bail out if lan78xx_get_endpoints fails
Larry Finger <[email protected]>
rtl8187: Fix warning generated when strncpy() destination length matches the sixe argument
Marcel Ziswiler <[email protected]>
ARM: dts: pxa: fix power i2c base address
Sara Sharon <[email protected]>
iwlwifi: mvm: avoid sending too many BARs
Vijay Immanuel <[email protected]>
IB/rxe: fixes for rdma read retry
Patryk Małek <[email protected]>
i40e: Prevent deleting MAC address from VF when set by PF
Patryk Małek <[email protected]>
i40e: hold the rtnl lock on clearing interrupt scheme
Mitch Williams <[email protected]>
i40e: use correct length for strncpy
Marek Szyprowski <[email protected]>
ARM: dts: exynos: Fix regulators configuration on Peach Pi/Pit Chromebooks
Marek Szyprowski <[email protected]>
ARM: dts: exynos: Fix sound in Snow-rev5 Chromebook
Tuomas Tynkkynen <[email protected]>
MIPS: BCM47XX: Enable USB power on Netgear WNDR3400v3
Charles Keepax <[email protected]>
ASoC: dpcm: Properly initialise hw->rate_max
Bob Peterson <[email protected]>
gfs2: Don't set GFS2_RDF_UPTODATE when the lvb is updated
Felix Fietkau <[email protected]>
ath9k: fix tx99 with monitor mode interface
Takashi Iwai <[email protected]>
ALSA: seq: Do error checks at creating system ports
Rajeev Kumar Sirasanagandla <[email protected]>
cfg80211: Avoid regulatory restore when COUNTRY_IE_IGNORE is set
Jay Foster <[email protected]>
ARM: dts: at91/trivial: Fix USART1 definition for at91sam9g45
Aapo Vienamo <[email protected]>
arm64: dts: tegra210-p2180: Correct sdmmc4 vqmmc-supply
Dan Carpenter <[email protected]>
ALSA: pcm: signedness bug in snd_pcm_plug_alloc()
Marcus Folkesson <[email protected]>
iio: dac: mcp4922: fix error handling in mcp4922_write_raw
Tamizh chelvam <[email protected]>
ath10k: fix kernel panic by moving pci flush after napi_disable
Eugen Hristev <[email protected]>
mmc: sdhci-of-at91: fix quirk2 overwrite
Roman Gushchin <[email protected]>
mm: hugetlb: switch to css_tryget() in hugetlb_cgroup_charge_cgroup()
Roman Gushchin <[email protected]>
mm: memcg: switch to css_tryget() in get_mem_cgroup_from_mm()
Eric Auger <[email protected]>
iommu/vt-d: Fix QI_DEV_IOTLB_PFSID and QI_DEV_EIOTLB_PFSID macros
Al Viro <[email protected]>
ecryptfs_lookup_interpose(): lower_dentry->d_parent is not stable either
Al Viro <[email protected]>
ecryptfs_lookup_interpose(): lower_dentry->d_inode is not stable
James Erwin <[email protected]>
IB/hfi1: Ensure full Gen3 speed in a Gen4 system
Chuhong Yuan <[email protected]>
Input: synaptics-rmi4 - destroy F54 poller workqueue when removing
Lucas Stach <[email protected]>
Input: synaptics-rmi4 - clear IRQ enables for F54
Lucas Stach <[email protected]>
Input: synaptics-rmi4 - fix video buffer size
Oliver Neukum <[email protected]>
Input: ff-memless - kill timer in destroy()
Henry Lin <[email protected]>
ALSA: usb-audio: not submit urb for stopped endpoint
Takashi Iwai <[email protected]>
ALSA: usb-audio: Fix missing error check at mixer resolution test
Jouni Hogander <[email protected]>
slip: Fix memory leak in slip_open error path
Oliver Neukum <[email protected]>
ax88172a: fix information leak on short answers
-------------
Diffstat:
Makefile | 4 +-
arch/arm/boot/compressed/libfdt_env.h | 2 +
arch/arm/boot/dts/am335x-evm.dts | 12 +--
arch/arm/boot/dts/arm-realview-eb.dtsi | 2 +-
arch/arm/boot/dts/arm-realview-pb1176.dts | 2 +-
arch/arm/boot/dts/arm-realview-pb11mp.dts | 2 +-
arch/arm/boot/dts/arm-realview-pbx.dtsi | 2 +-
arch/arm/boot/dts/at91sam9g45.dtsi | 2 +-
arch/arm/boot/dts/dove-cubox.dts | 2 +-
arch/arm/boot/dts/dove.dtsi | 6 +-
arch/arm/boot/dts/exynos5250-arndale.dts | 9 ++
arch/arm/boot/dts/exynos5250-snow-rev5.dts | 11 +++
arch/arm/boot/dts/exynos5420-peach-pit.dts | 3 +
arch/arm/boot/dts/exynos5800-peach-pi.dts | 3 +
arch/arm/boot/dts/lpc32xx.dtsi | 4 +-
arch/arm/boot/dts/omap3-gta04.dtsi | 49 ++++++---
arch/arm/boot/dts/omap5-board-common.dtsi | 5 +
arch/arm/boot/dts/orion5x-linkstation.dtsi | 2 +-
arch/arm/boot/dts/pxa27x.dtsi | 2 +-
arch/arm/boot/dts/qcom-ipq4019.dtsi | 2 +-
arch/arm/boot/dts/rk3036.dtsi | 2 +-
arch/arm/boot/dts/socfpga_cyclone5_de0_sockit.dts | 2 +-
arch/arm/boot/dts/ste-dbx5x0.dtsi | 6 +-
arch/arm/boot/dts/ste-href-family-pinctrl.dtsi | 8 +-
arch/arm/boot/dts/ste-hrefprev60.dtsi | 2 +-
arch/arm/boot/dts/ste-snowball.dts | 2 +-
arch/arm/boot/dts/ste-u300.dts | 2 +-
arch/arm/boot/dts/tegra20-paz00.dts | 6 +-
arch/arm/boot/dts/tegra30-apalis.dtsi | 6 +-
arch/arm/boot/dts/tegra30.dtsi | 6 +-
arch/arm/boot/dts/versatile-ab.dts | 2 +-
arch/arm/kernel/entry-common.S | 9 +-
arch/arm/kvm/mmu.c | 3 +-
arch/arm/mach-imx/pm-imx6.c | 25 +++++
arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi | 4 +-
arch/arm64/boot/dts/lg/lg1312.dtsi | 4 +-
arch/arm64/boot/dts/lg/lg1313.dtsi | 4 +-
arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi | 1 +
arch/arm64/lib/clear_user.S | 2 +
arch/arm64/lib/copy_from_user.S | 2 +
arch/arm64/lib/copy_in_user.S | 2 +
arch/arm64/lib/copy_to_user.S | 2 +
arch/arm64/mm/numa.c | 2 +-
arch/mips/bcm47xx/workarounds.c | 8 +-
arch/mips/include/asm/kexec.h | 6 +-
arch/mips/txx9/generic/setup.c | 5 +-
arch/powerpc/boot/libfdt_env.h | 2 +
arch/powerpc/kernel/iommu.c | 2 +-
arch/powerpc/kernel/rtas.c | 2 +
arch/powerpc/kernel/vdso32/datapage.S | 1 +
arch/powerpc/kernel/vdso32/gettimeofday.S | 1 +
arch/powerpc/kernel/vdso64/datapage.S | 1 +
arch/powerpc/kernel/vdso64/gettimeofday.S | 1 +
arch/powerpc/kvm/book3s.c | 3 +
arch/powerpc/mm/slb.c | 2 +-
arch/powerpc/platforms/pseries/dtl.c | 4 +-
arch/s390/kernel/vdso32/Makefile | 3 +-
arch/s390/kernel/vdso64/Makefile | 3 +-
arch/x86/Kconfig | 3 +-
arch/x86/include/asm/atomic.h | 8 +-
arch/x86/include/asm/atomic64_64.h | 8 +-
arch/x86/include/asm/barrier.h | 4 +-
arch/x86/include/asm/insn.h | 18 ++++
arch/x86/include/asm/kexec.h | 2 +-
arch/x86/kernel/cpu/cyrix.c | 2 +-
arch/x86/kernel/kprobes/core.c | 4 +
arch/x86/kernel/uprobes.c | 6 +-
crypto/rsa-pkcs1pad.c | 9 --
drivers/acpi/acpica/acevents.h | 2 +
drivers/acpi/acpica/aclocal.h | 2 +-
drivers/acpi/acpica/evregion.c | 17 +++-
drivers/acpi/acpica/evrgnini.c | 6 +-
drivers/acpi/acpica/evxfregn.c | 1 -
drivers/acpi/osl.c | 1 +
drivers/acpi/pci_root.c | 5 +-
drivers/acpi/sbshc.c | 2 +
drivers/ata/Kconfig | 3 +-
drivers/ata/libata-scsi.c | 21 ++++
drivers/ata/pata_ep93xx.c | 8 +-
drivers/base/component.c | 6 +-
drivers/clk/samsung/clk-cpu.c | 6 +-
drivers/clk/samsung/clk-cpu.h | 2 +-
drivers/crypto/mxs-dcp.c | 80 ++++++++++++---
drivers/crypto/s5p-sss.c | 4 +-
drivers/dma/Kconfig | 2 +-
drivers/dma/dma-jz4780.c | 2 +-
drivers/dma/ioat/init.c | 7 +-
drivers/dma/timb_dma.c | 2 +-
drivers/gpio/gpio-syscon.c | 2 +-
drivers/hwmon/ina3221.c | 6 +-
drivers/hwmon/pwm-fan.c | 8 +-
drivers/hwtracing/coresight/coresight-etm4x.c | 40 ++++----
drivers/hwtracing/coresight/coresight-tmc-etf.c | 4 +-
drivers/hwtracing/coresight/coresight.c | 22 +++--
drivers/i2c/busses/Kconfig | 7 +-
drivers/iio/dac/mcp4922.c | 11 ++-
drivers/infiniband/hw/hfi1/pcie.c | 4 +-
drivers/infiniband/hw/i40iw/i40iw_cm.c | 2 +-
drivers/infiniband/hw/mthca/mthca_main.c | 3 +-
drivers/infiniband/sw/rxe/rxe_comp.c | 21 +++-
drivers/infiniband/sw/rxe/rxe_req.c | 15 +--
drivers/infiniband/ulp/iser/iser_initiator.c | 18 +++-
drivers/input/ff-memless.c | 9 ++
drivers/input/rmi4/rmi_f54.c | 5 +-
drivers/input/touchscreen/silead.c | 13 +++
drivers/input/touchscreen/st1232.c | 1 +
drivers/md/bcache/super.c | 1 +
drivers/media/pci/ivtv/ivtv-yuv.c | 2 +-
drivers/media/pci/meye/meye.c | 2 +-
drivers/media/platform/davinci/isif.c | 3 +-
drivers/media/platform/davinci/vpbe_display.c | 2 +-
drivers/media/platform/pxa_camera.c | 2 +-
drivers/media/usb/au0828/au0828-core.c | 4 +-
drivers/media/usb/cx231xx/cx231xx-video.c | 2 +-
drivers/mfd/ti_am335x_tscadc.c | 13 +++
drivers/misc/cxl/guest.c | 2 -
drivers/misc/genwqe/card_utils.c | 13 +--
drivers/misc/kgdbts.c | 16 ++-
drivers/mmc/host/sdhci-of-at91.c | 2 +-
drivers/mtd/maps/physmap_of.c | 27 +----
drivers/mtd/nand/sh_flctl.c | 4 +-
drivers/net/can/slcan.c | 1 +
drivers/net/ethernet/amd/am79c961a.c | 2 +-
drivers/net/ethernet/amd/atarilance.c | 6 +-
drivers/net/ethernet/amd/declance.c | 2 +-
drivers/net/ethernet/amd/sun3lance.c | 6 +-
drivers/net/ethernet/amd/sunlance.c | 2 +-
drivers/net/ethernet/amd/xgbe/xgbe-drv.c | 4 +-
drivers/net/ethernet/broadcom/bcm63xx_enet.c | 5 +-
drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c | 10 ++
drivers/net/ethernet/broadcom/sb1250-mac.c | 4 +-
drivers/net/ethernet/chelsio/cxgb4/cxgb4_dcb.c | 4 +-
drivers/net/ethernet/chelsio/cxgb4/cxgb4_dcb.h | 2 +-
drivers/net/ethernet/chelsio/cxgb4/t4_hw.c | 2 +-
drivers/net/ethernet/intel/i40e/i40e_main.c | 8 ++
drivers/net/ethernet/intel/i40e/i40e_ptp.c | 3 +-
drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c | 10 ++
drivers/net/ethernet/intel/ixgbe/ixgbe_main.c | 10 +-
drivers/net/ethernet/mellanox/mlxsw/spectrum.c | 7 ++
drivers/net/ethernet/micrel/ks8695net.c | 2 +-
drivers/net/ethernet/micrel/ks8851_mll.c | 4 +-
drivers/net/ethernet/smsc/smc911x.c | 3 +-
drivers/net/ethernet/smsc/smc91x.c | 3 +-
drivers/net/ethernet/smsc/smsc911x.c | 3 +-
drivers/net/ethernet/toshiba/ps3_gelic_net.c | 4 +-
drivers/net/ethernet/toshiba/ps3_gelic_net.h | 2 +-
drivers/net/ethernet/toshiba/spider_net.c | 4 +-
drivers/net/ethernet/toshiba/tc35815.c | 6 +-
drivers/net/ethernet/xilinx/ll_temac_main.c | 3 +-
drivers/net/ethernet/xilinx/xilinx_axienet_main.c | 3 +-
drivers/net/ethernet/xilinx/xilinx_emaclite.c | 9 +-
drivers/net/slip/slip.c | 1 +
drivers/net/usb/ax88172a.c | 2 +-
drivers/net/usb/cdc_ncm.c | 2 +-
drivers/net/usb/lan78xx.c | 5 +
drivers/net/wireless/ath/ath10k/ahb.c | 4 +-
drivers/net/wireless/ath/ath10k/core.h | 1 +
drivers/net/wireless/ath/ath10k/mac.c | 2 +-
drivers/net/wireless/ath/ath10k/pci.c | 2 +-
drivers/net/wireless/ath/ath10k/wmi.c | 22 ++++-
drivers/net/wireless/ath/ath10k/wmi.h | 8 +-
drivers/net/wireless/ath/ath9k/common-spectral.c | 2 +-
drivers/net/wireless/ath/ath9k/main.c | 1 -
drivers/net/wireless/ath/ath9k/tx99.c | 10 +-
.../net/wireless/broadcom/brcm80211/brcmfmac/p2p.c | 26 +++--
.../net/wireless/broadcom/brcm80211/brcmfmac/p2p.h | 2 +
drivers/net/wireless/intel/iwlwifi/mvm/d3.c | 4 +-
drivers/net/wireless/intel/iwlwifi/mvm/tx.c | 8 ++
.../net/wireless/realtek/rtl818x/rtl8187/leds.c | 2 +-
drivers/net/xen-netback/interface.c | 3 +-
drivers/nvmem/core.c | 2 +-
drivers/of/base.c | 2 +-
drivers/phy/phy-twl4030-usb.c | 29 ++++++
drivers/pinctrl/pinctrl-at91-pio4.c | 8 +-
drivers/pinctrl/pinctrl-at91.c | 28 +++---
drivers/power/reset/at91-sama5d2_shdwc.c | 3 +
drivers/power/supply/ab8500_fg.c | 31 +++---
drivers/power/supply/max8998_charger.c | 2 +-
drivers/power/supply/twl4030_charger.c | 30 +++++-
drivers/reset/core.c | 15 +--
drivers/s390/net/qeth_l2_main.c | 3 +
drivers/s390/net/qeth_l3_main.c | 3 +
drivers/scsi/NCR5380.c | 42 +++++---
drivers/scsi/libsas/sas_expander.c | 13 +--
drivers/scsi/pm8001/pm8001_hwi.c | 6 ++
drivers/scsi/pm8001/pm8001_sas.c | 9 +-
drivers/scsi/pm8001/pm8001_sas.h | 1 +
drivers/scsi/pm8001/pm80xx_hwi.c | 80 +++++++++++++--
drivers/scsi/pm8001/pm80xx_hwi.h | 3 +
drivers/scsi/sym53c8xx_2/sym_hipd.c | 15 ++-
drivers/spi/spi-pic32.c | 4 +-
drivers/spi/spi-rockchip.c | 3 +
drivers/spi/spidev.c | 8 +-
drivers/tty/serial/mxs-auart.c | 3 +-
drivers/usb/chipidea/otg.c | 9 +-
drivers/usb/chipidea/usbmisc_imx.c | 2 +
drivers/usb/gadget/function/uvc_configfs.c | 7 ++
drivers/usb/gadget/function/uvc_video.c | 32 ++++--
drivers/usb/gadget/udc/fotg210-udc.c | 2 +-
drivers/usb/host/xhci-mtk-sch.c | 4 +-
drivers/usb/serial/cypress_m8.c | 2 +-
drivers/vfio/pci/vfio_pci.c | 8 +-
drivers/vfio/pci/vfio_pci_config.c | 31 +++++-
drivers/video/backlight/lm3639_bl.c | 6 +-
drivers/video/fbdev/core/fbmon.c | 95 ------------------
drivers/video/fbdev/core/modedb.c | 57 -----------
drivers/video/fbdev/sbuslib.c | 28 +++---
fs/compat_ioctl.c | 10 +-
fs/ecryptfs/inode.c | 19 ++--
fs/f2fs/gc.c | 2 +-
fs/f2fs/recovery.c | 2 +
fs/f2fs/super.c | 6 +-
fs/fuse/control.c | 4 +-
fs/gfs2/rgrp.c | 2 +-
fs/gfs2/super.c | 2 +-
fs/kernfs/symlink.c | 5 +-
fs/nfs/delegation.c | 6 +-
fs/orangefs/orangefs-sysfs.c | 2 +-
fs/proc/vmcore.c | 10 ++
include/linux/blkdev.h | 9 +-
include/linux/cpufeature.h | 2 +-
include/linux/edac.h | 3 +-
include/linux/fb.h | 3 -
include/linux/intel-iommu.h | 6 +-
include/linux/libfdt_env.h | 1 +
include/linux/platform_data/dma-ep93xx.h | 2 +-
include/linux/sunrpc/sched.h | 2 -
include/net/llc.h | 1 +
include/rdma/ib_verbs.h | 2 +-
kernel/cpu.c | 1 +
kernel/events/uprobes.c | 4 +-
kernel/kprobes.c | 8 +-
kernel/printk/printk.c | 18 ++--
kernel/signal.c | 4 +
mm/hugetlb_cgroup.c | 2 +-
mm/memcontrol.c | 2 +-
mm/shmem.c | 2 +-
net/bluetooth/l2cap_core.c | 10 ++
net/ipv4/gre_demux.c | 7 +-
net/ipv4/ip_gre.c | 9 +-
net/llc/llc_core.c | 4 +-
net/mac80211/rc80211_minstrel_ht.c | 2 +-
net/openvswitch/vport-internal_dev.c | 5 +-
net/sunrpc/sched.c | 109 ++++++++++-----------
net/wireless/nl80211.c | 2 +-
net/wireless/reg.c | 46 +++++++++
samples/mei/mei-amt-version.c | 2 +-
sound/core/oss/pcm_plugin.c | 4 +-
sound/core/seq/seq_system.c | 18 +++-
sound/pci/hda/patch_sigmatel.c | 20 ++++
sound/pci/intel8x0m.c | 20 ++--
sound/soc/codecs/hdac_hdmi.c | 6 ++
sound/soc/codecs/sgtl5000.c | 2 +-
sound/soc/soc-pcm.c | 2 +-
sound/usb/endpoint.c | 3 +
sound/usb/mixer.c | 4 +-
256 files changed, 1341 insertions(+), 746 deletions(-)
From: Bob Peterson <[email protected]>
[ Upstream commit 4f36cb36c9d14340bb200d2ad9117b03ce992cfe ]
The GFS2_RDF_UPTODATE flag in the rgrp is used to determine when
a rgrp buffer is valid. It's cleared when the glock is invalidated,
signifying that the buffer data is now invalid. But before this
patch, function update_rgrp_lvb was setting the flag when it
determined it had a valid lvb. But that's an invalid assumption:
just because you have a valid lvb doesn't mean you have valid
buffers. After all, another node may have made the lvb valid,
and this node just fetched it from the glock via dlm.
Consider this scenario:
1. The file system is mounted with RGRPLVB option.
2. In gfs2_inplace_reserve it locks the rgrp glock EX, but thanks
to GL_SKIP, it skips the gfs2_rgrp_bh_get.
3. Since loops == 0 and the allocation target (ap->target) is
bigger than the largest known chunk of blocks in the rgrp
(rs->rs_rbm.rgd->rd_extfail_pt) it skips that rgrp and bypasses
the call to gfs2_rgrp_bh_get there as well.
4. update_rgrp_lvb sees the lvb MAGIC number is valid, so bypasses
gfs2_rgrp_bh_get, but it still sets sets GFS2_RDF_UPTODATE due
to this invalid assumption.
5. The next time update_rgrp_lvb is called, it sees the bit is set
and just returns 0, assuming both the lvb and rgrp are both
uptodate. But since this is a smaller allocation, or space has
been freed by another node, thus adjusting the lvb values,
it decides to use the rgrp for allocations, with invalid rd_free
due to the fact it was never updated.
This patch changes update_rgrp_lvb so it doesn't set the UPTODATE
flag anymore. That way, it has no choice but to fetch the latest
values.
Signed-off-by: Bob Peterson <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/gfs2/rgrp.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/fs/gfs2/rgrp.c b/fs/gfs2/rgrp.c
index 0731267072706..f77a38755aea6 100644
--- a/fs/gfs2/rgrp.c
+++ b/fs/gfs2/rgrp.c
@@ -1211,7 +1211,7 @@ static int update_rgrp_lvb(struct gfs2_rgrpd *rgd)
rl_flags = be32_to_cpu(rgd->rd_rgl->rl_flags);
rl_flags &= ~GFS2_RDF_MASK;
rgd->rd_flags &= GFS2_RDF_MASK;
- rgd->rd_flags |= (rl_flags | GFS2_RDF_UPTODATE | GFS2_RDF_CHECK);
+ rgd->rd_flags |= (rl_flags | GFS2_RDF_CHECK);
if (rgd->rd_rgl->rl_unlinked == 0)
rgd->rd_flags &= ~GFS2_RDF_CHECK;
rgd->rd_free = be32_to_cpu(rgd->rd_rgl->rl_free);
--
2.20.1
From: Eric W. Biederman <[email protected]>
[ Upstream commit 86989c41b5ea08776c450cb759592532314a4ed6 ]
If the first process started (aka /sbin/init) receives a SIGKILL it
will panic the system if it is delivered. Making the system unusable
and undebugable. It isn't much better if the first process started
receives SIGSTOP.
So always ignore SIGSTOP and SIGKILL sent to init.
This is done in a separate clause in sig_task_ignored as force_sig_info
can clear SIG_UNKILLABLE and this protection should work even then.
Reviewed-by: Thomas Gleixner <[email protected]>
Signed-off-by: "Eric W. Biederman" <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
kernel/signal.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/kernel/signal.c b/kernel/signal.c
index 2bb1f9dc86c7d..30914b3c76b21 100644
--- a/kernel/signal.c
+++ b/kernel/signal.c
@@ -71,6 +71,10 @@ static int sig_task_ignored(struct task_struct *t, int sig, bool force)
handler = sig_handler(t, sig);
+ /* SIGKILL and SIGSTOP may not be sent to the global init */
+ if (unlikely(is_global_init(t) && sig_kernel_only(sig)))
+ return true;
+
if (unlikely(t->signal->flags & SIGNAL_UNKILLABLE) &&
handler == SIG_DFL && !(force && sig_kernel_only(sig)))
return 1;
--
2.20.1
From: Al Viro <[email protected]>
commit 762c69685ff7ad5ad7fee0656671e20a0c9c864d upstream.
We need to get the underlying dentry of parent; sure, absent the races
it is the parent of underlying dentry, but there's nothing to prevent
losing a timeslice to preemtion in the middle of evaluation of
lower_dentry->d_parent->d_inode, having another process move lower_dentry
around and have its (ex)parent not pinned anymore and freed on memory
pressure. Then we regain CPU and try to fetch ->d_inode from memory
that is freed by that point.
dentry->d_parent *is* stable here - it's an argument of ->lookup() and
we are guaranteed that it won't be moved anywhere until we feed it
to d_add/d_splice_alias. So we safely go that way to get to its
underlying dentry.
Cc: [email protected] # since 2009 or so
Signed-off-by: Al Viro <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/ecryptfs/inode.c | 7 +++----
1 file changed, 3 insertions(+), 4 deletions(-)
--- a/fs/ecryptfs/inode.c
+++ b/fs/ecryptfs/inode.c
@@ -326,9 +326,9 @@ static int ecryptfs_i_size_read(struct d
static struct dentry *ecryptfs_lookup_interpose(struct dentry *dentry,
struct dentry *lower_dentry)
{
+ struct path *path = ecryptfs_dentry_to_lower_path(dentry->d_parent);
struct inode *inode, *lower_inode;
struct ecryptfs_dentry_info *dentry_info;
- struct vfsmount *lower_mnt;
int rc = 0;
dentry_info = kmem_cache_alloc(ecryptfs_dentry_info_cache, GFP_KERNEL);
@@ -340,13 +340,12 @@ static struct dentry *ecryptfs_lookup_in
return ERR_PTR(-ENOMEM);
}
- lower_mnt = mntget(ecryptfs_dentry_to_lower_mnt(dentry->d_parent));
fsstack_copy_attr_atime(d_inode(dentry->d_parent),
- d_inode(lower_dentry->d_parent));
+ d_inode(path->dentry));
BUG_ON(!d_count(lower_dentry));
ecryptfs_set_dentry_private(dentry, dentry_info);
- dentry_info->lower_path.mnt = lower_mnt;
+ dentry_info->lower_path.mnt = mntget(path->mnt);
dentry_info->lower_path.dentry = lower_dentry;
/*
From: Larry Finger <[email protected]>
[ Upstream commit 199ba9faca909e77ac533449ecd1248123ce89e7 ]
In gcc8, when the 3rd argument (size) of a call to strncpy() matches the
length of the first argument, the compiler warns of the possibility of an
unterminated string. Using strlcpy() forces a null at the end.
Signed-off-by: Larry Finger <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/realtek/rtl818x/rtl8187/leds.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/wireless/realtek/rtl818x/rtl8187/leds.c b/drivers/net/wireless/realtek/rtl818x/rtl8187/leds.c
index c2d5b495c179a..c089540116fa7 100644
--- a/drivers/net/wireless/realtek/rtl818x/rtl8187/leds.c
+++ b/drivers/net/wireless/realtek/rtl818x/rtl8187/leds.c
@@ -146,7 +146,7 @@ static int rtl8187_register_led(struct ieee80211_hw *dev,
led->dev = dev;
led->ledpin = ledpin;
led->is_radio = is_radio;
- strncpy(led->name, name, sizeof(led->name));
+ strlcpy(led->name, name, sizeof(led->name));
led->led_dev.name = led->name;
led->led_dev.default_trigger = default_trigger;
--
2.20.1
From: Eric W. Biederman <[email protected]>
[ Upstream commit 55a3235fc71bf34303e34a95eeee235b2d2a35dd ]
For userspace to tell the difference between a random signal and an
exception, the exception must include siginfo information.
Using SEND_SIG_FORCED for SIGILL is thus wrong, and it will result
in userspace seeing si_code == SI_USER (like a random signal) instead
of si_code == SI_KERNEL or a more specific si_code as all exceptions
deliver.
Therefore replace force_sig_info(SIGILL, SEND_SIG_FORCE, current)
with force_sig(SIG_ILL, current) which gets this right and is
shorter and easier to type.
Fixes: 014940bad8e4 ("uprobes/x86: Send SIGILL if arch_uprobe_post_xol() fails")
Fixes: 0b5256c7f173 ("uprobes: Send SIGILL if handle_trampoline() fails")
Reviewed-by: Thomas Gleixner <[email protected]>
Signed-off-by: "Eric W. Biederman" <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
kernel/events/uprobes.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/kernel/events/uprobes.c b/kernel/events/uprobes.c
index fbfab5722254a..8ddd29476c0dc 100644
--- a/kernel/events/uprobes.c
+++ b/kernel/events/uprobes.c
@@ -1846,7 +1846,7 @@ static void handle_trampoline(struct pt_regs *regs)
sigill:
uprobe_warn(current, "handle uretprobe, sending SIGILL.");
- force_sig_info(SIGILL, SEND_SIG_FORCED, current);
+ force_sig(SIGILL, current);
}
@@ -1962,7 +1962,7 @@ static void handle_singlestep(struct uprobe_task *utask, struct pt_regs *regs)
if (unlikely(err)) {
uprobe_warn(current, "execute the probed insn, sending SIGILL.");
- force_sig_info(SIGILL, SEND_SIG_FORCED, current);
+ force_sig(SIGILL, current);
}
}
--
2.20.1
From: Chao Yu <[email protected]>
[ Upstream commit 4a70e255449c9a13eed7a6eeecc85a1ea63cef76 ]
In fill_super -> init_percpu_info, we should destroy percpu counter
in error path, otherwise memory allcoated for percpu counter will
leak.
Signed-off-by: Chao Yu <[email protected]>
Signed-off-by: Jaegeuk Kim <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/f2fs/super.c | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
diff --git a/fs/f2fs/super.c b/fs/f2fs/super.c
index 9eff18c1f3e46..e0ac676e0a35c 100644
--- a/fs/f2fs/super.c
+++ b/fs/f2fs/super.c
@@ -1650,8 +1650,12 @@ static int init_percpu_info(struct f2fs_sb_info *sbi)
if (err)
return err;
- return percpu_counter_init(&sbi->total_valid_inode_count, 0,
+ err = percpu_counter_init(&sbi->total_valid_inode_count, 0,
GFP_KERNEL);
+ if (err)
+ percpu_counter_destroy(&sbi->alloc_valid_block_count);
+
+ return err;
}
/*
--
2.20.1
From: Eric Auger <[email protected]>
commit 4e7120d79edb31e4ee68e6f8421448e4603be1e9 upstream.
For both PASID-based-Device-TLB Invalidate Descriptor and
Device-TLB Invalidate Descriptor, the Physical Function Source-ID
value is split according to this layout:
PFSID[3:0] is set at offset 12 and PFSID[15:4] is put at offset 52.
Fix the part laid out at offset 52.
Fixes: 0f725561e1684 ("iommu/vt-d: Add definitions for PFSID")
Signed-off-by: Eric Auger <[email protected]>
Acked-by: Jacob Pan <[email protected]>
Cc: [email protected] # v4.19+
Acked-by: Lu Baolu <[email protected]>
Signed-off-by: Joerg Roedel <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
include/linux/intel-iommu.h | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
--- a/include/linux/intel-iommu.h
+++ b/include/linux/intel-iommu.h
@@ -295,7 +295,8 @@ enum {
#define QI_DEV_IOTLB_SID(sid) ((u64)((sid) & 0xffff) << 32)
#define QI_DEV_IOTLB_QDEP(qdep) (((qdep) & 0x1f) << 16)
#define QI_DEV_IOTLB_ADDR(addr) ((u64)(addr) & VTD_PAGE_MASK)
-#define QI_DEV_IOTLB_PFSID(pfsid) (((u64)(pfsid & 0xf) << 12) | ((u64)(pfsid & 0xfff) << 52))
+#define QI_DEV_IOTLB_PFSID(pfsid) (((u64)(pfsid & 0xf) << 12) | \
+ ((u64)((pfsid >> 4) & 0xfff) << 52))
#define QI_DEV_IOTLB_SIZE 1
#define QI_DEV_IOTLB_MAX_INVS 32
@@ -320,7 +321,8 @@ enum {
#define QI_DEV_EIOTLB_PASID(p) (((u64)p) << 32)
#define QI_DEV_EIOTLB_SID(sid) ((u64)((sid) & 0xffff) << 16)
#define QI_DEV_EIOTLB_QDEP(qd) ((u64)((qd) & 0x1f) << 4)
-#define QI_DEV_EIOTLB_PFSID(pfsid) (((u64)(pfsid & 0xf) << 12) | ((u64)(pfsid & 0xfff) << 52))
+#define QI_DEV_EIOTLB_PFSID(pfsid) (((u64)(pfsid & 0xf) << 12) | \
+ ((u64)((pfsid >> 4) & 0xfff) << 52))
#define QI_DEV_EIOTLB_MAX_INVS 32
#define QI_PGRP_IDX(idx) (((u64)(idx)) << 55)
From: Oleksij Rempel <[email protected]>
[ Upstream commit 8148d2136002da2e2887caf6a07bbd9c033f14f3 ]
One of the Freescale recommended sequences for power off with external
PMIC is the following:
...
3. SoC is programming PMIC for power off when standby is asserted.
4. In CCM STOP mode, Standby is asserted, PMIC gates SoC supplies.
See:
http://www.nxp.com/assets/documents/data/en/reference-manuals/IMX6DQRM.pdf
page 5083
This patch implements step 4. of this sequence.
Signed-off-by: Oleksij Rempel <[email protected]>
Signed-off-by: Shawn Guo <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm/mach-imx/pm-imx6.c | 25 +++++++++++++++++++++++++
1 file changed, 25 insertions(+)
diff --git a/arch/arm/mach-imx/pm-imx6.c b/arch/arm/mach-imx/pm-imx6.c
index 1515e498d348c..dd9eb3f14f45c 100644
--- a/arch/arm/mach-imx/pm-imx6.c
+++ b/arch/arm/mach-imx/pm-imx6.c
@@ -602,6 +602,28 @@ static void __init imx6_pm_common_init(const struct imx6_pm_socdata
IMX6Q_GPR1_GINT);
}
+static void imx6_pm_stby_poweroff(void)
+{
+ imx6_set_lpm(STOP_POWER_OFF);
+ imx6q_suspend_finish(0);
+
+ mdelay(1000);
+
+ pr_emerg("Unable to poweroff system\n");
+}
+
+static int imx6_pm_stby_poweroff_probe(void)
+{
+ if (pm_power_off) {
+ pr_warn("%s: pm_power_off already claimed %p %pf!\n",
+ __func__, pm_power_off, pm_power_off);
+ return -EBUSY;
+ }
+
+ pm_power_off = imx6_pm_stby_poweroff;
+ return 0;
+}
+
void __init imx6_pm_ccm_init(const char *ccm_compat)
{
struct device_node *np;
@@ -618,6 +640,9 @@ void __init imx6_pm_ccm_init(const char *ccm_compat)
val = readl_relaxed(ccm_base + CLPCR);
val &= ~BM_CLPCR_LPM;
writel_relaxed(val, ccm_base + CLPCR);
+
+ if (of_property_read_bool(np, "fsl,pmic-stby-poweroff"))
+ imx6_pm_stby_poweroff_probe();
}
void __init imx6q_pm_init(void)
--
2.20.1
From: Eugen Hristev <[email protected]>
commit fed23c5829ecab4ddc712d7b0046e59610ca3ba4 upstream.
The quirks2 are parsed and set (e.g. from DT) before the quirk for broken
HS200 is set in the driver.
The driver needs to enable just this flag, not rewrite the whole quirk set.
Fixes: 7871aa60ae00 ("mmc: sdhci-of-at91: add quirk for broken HS200")
Signed-off-by: Eugen Hristev <[email protected]>
Acked-by: Adrian Hunter <[email protected]>
Cc: [email protected]
Signed-off-by: Ulf Hansson <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/mmc/host/sdhci-of-at91.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/mmc/host/sdhci-of-at91.c
+++ b/drivers/mmc/host/sdhci-of-at91.c
@@ -318,7 +318,7 @@ static int sdhci_at91_probe(struct platf
pm_runtime_use_autosuspend(&pdev->dev);
/* HS200 is broken at this moment */
- host->quirks2 = SDHCI_QUIRK2_BROKEN_HS200;
+ host->quirks2 |= SDHCI_QUIRK2_BROKEN_HS200;
ret = sdhci_add_host(host);
if (ret)
From: Charles Keepax <[email protected]>
[ Upstream commit e33ffbd9cd39da09831ce62c11025d830bf78d9e ]
If the CPU DAI does not initialise rate_max, say if using
using KNOT or CONTINUOUS, then the rate_max field will be
initialised to 0. A value of zero in the rate_max field of
the hardware runtime will cause the sound card to support no
sample rates at all. Obviously this is not desired, just a
different mechanism is being used to apply the constraints. As
such update the setting of rate_max in dpcm_init_runtime_hw
to be consistent with the non-DPCM cases and set rate_max to
UINT_MAX if nothing is defined on the CPU DAI.
Signed-off-by: Charles Keepax <[email protected]>
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/soc/soc-pcm.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/sound/soc/soc-pcm.c b/sound/soc/soc-pcm.c
index 1d00f6e894ef4..d69559e458725 100644
--- a/sound/soc/soc-pcm.c
+++ b/sound/soc/soc-pcm.c
@@ -1592,7 +1592,7 @@ static void dpcm_init_runtime_hw(struct snd_pcm_runtime *runtime,
u64 formats)
{
runtime->hw.rate_min = stream->rate_min;
- runtime->hw.rate_max = stream->rate_max;
+ runtime->hw.rate_max = min_not_zero(stream->rate_max, UINT_MAX);
runtime->hw.channels_min = stream->channels_min;
runtime->hw.channels_max = stream->channels_max;
if (runtime->hw.formats)
--
2.20.1
From: Aapo Vienamo <[email protected]>
[ Upstream commit 6ff7705da8806de45ca1490194f0b4eb07725804 ]
On p2180 sdmmc4 is powered from a fixed 1.8 V regulator.
Signed-off-by: Aapo Vienamo <[email protected]>
Reviewed-by: Mikko Perttunen <[email protected]>
Signed-off-by: Thierry Reding <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi b/arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi
index 6a51d282ec636..d1e687b4911f5 100644
--- a/arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi
@@ -281,6 +281,7 @@
status = "okay";
bus-width = <8>;
non-removable;
+ vqmmc-supply = <&vdd_1v8>;
};
clocks {
--
2.20.1
From: Takashi Iwai <[email protected]>
commit 167beb1756791e0806365a3f86a0da10d7a327ee upstream.
A check of the return value from get_cur_mix_raw() is missing at the
resolution test code in get_min_max_with_quirks(), which may leave the
variable untouched, leading to a random uninitialized value, as
detected by syzkaller fuzzer.
Add the missing return error check for fixing that.
Reported-and-tested-by: [email protected]
Cc: <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
sound/usb/mixer.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
--- a/sound/usb/mixer.c
+++ b/sound/usb/mixer.c
@@ -1046,7 +1046,8 @@ static int get_min_max_with_quirks(struc
if (cval->min + cval->res < cval->max) {
int last_valid_res = cval->res;
int saved, test, check;
- get_cur_mix_raw(cval, minchn, &saved);
+ if (get_cur_mix_raw(cval, minchn, &saved) < 0)
+ goto no_res_check;
for (;;) {
test = saved;
if (test < cval->max)
@@ -1066,6 +1067,7 @@ static int get_min_max_with_quirks(struc
snd_usb_set_cur_mix_value(cval, minchn, 0, saved);
}
+no_res_check:
cval->initialized = 1;
}
From: Lao Wei <[email protected]>
[ Upstream commit eac7230fdb4672c2cb56f6a01a1744f562c01f80 ]
Motion eye video4linux driver for Sony Vaio PictureBook desn't validate user-controlled parameter
'vma->vm_pgoff', a malicious process might access all of kernel memory from user space by trying
pass different arbitrary address.
Discussion: http://www.openwall.com/lists/oss-security/2018/07/06/1
Signed-off-by: Lao Wei <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/media/pci/meye/meye.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/media/pci/meye/meye.c b/drivers/media/pci/meye/meye.c
index ba887e8e1b171..a85c5199ccd30 100644
--- a/drivers/media/pci/meye/meye.c
+++ b/drivers/media/pci/meye/meye.c
@@ -1469,7 +1469,7 @@ static int meye_mmap(struct file *file, struct vm_area_struct *vma)
unsigned long page, pos;
mutex_lock(&meye.lock);
- if (size > gbuffers * gbufsize) {
+ if (size > gbuffers * gbufsize || offset > gbuffers * gbufsize - size) {
mutex_unlock(&meye.lock);
return -EINVAL;
}
--
2.20.1
From: H. Nikolaus Schaller <[email protected]>
[ Upstream commit 7384a24248eda140a234d356b6c840701ee9f055 ]
we fix penirq polarity, add penirq pinmux and touchscreen
properties.
Signed-off-by: H. Nikolaus Schaller <[email protected]>
Signed-off-by: Tony Lindgren <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm/boot/dts/omap3-gta04.dtsi | 18 +++++++++++++++++-
1 file changed, 17 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/omap3-gta04.dtsi b/arch/arm/boot/dts/omap3-gta04.dtsi
index e86f42086a29b..6e809b0ff5c9f 100644
--- a/arch/arm/boot/dts/omap3-gta04.dtsi
+++ b/arch/arm/boot/dts/omap3-gta04.dtsi
@@ -274,6 +274,13 @@
OMAP3_CORE1_IOPAD(0x2134, PIN_INPUT_PULLUP | MUX_MODE4) /* gpio112 */
>;
};
+
+ penirq_pins: pinmux_penirq_pins {
+ pinctrl-single,pins = <
+ /* here we could enable to wakeup the cpu from suspend by a pen touch */
+ OMAP3_CORE1_IOPAD(0x2194, PIN_INPUT_PULLUP | MUX_MODE4) /* gpio160 */
+ >;
+ };
};
&omap3_pmx_core2 {
@@ -411,10 +418,19 @@
tsc2007@48 {
compatible = "ti,tsc2007";
reg = <0x48>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&penirq_pins>;
interrupt-parent = <&gpio6>;
interrupts = <0 IRQ_TYPE_EDGE_FALLING>; /* GPIO_160 */
- gpios = <&gpio6 0 GPIO_ACTIVE_LOW>;
+ gpios = <&gpio6 0 GPIO_ACTIVE_LOW>; /* GPIO_160 */
ti,x-plate-ohms = <600>;
+ touchscreen-size-x = <480>;
+ touchscreen-size-y = <640>;
+ touchscreen-max-pressure = <1000>;
+ touchscreen-fuzz-x = <3>;
+ touchscreen-fuzz-y = <8>;
+ touchscreen-fuzz-pressure = <10>;
+ touchscreen-inverted-y;
};
/* RFID EEPROM */
--
2.20.1
From: Arnd Bergmann <[email protected]>
[ Upstream commit 1ccbeeb888ac33627d91f1ccf0b84ef3bcadef24 ]
The VIDEO_GET_EVENT and VIDEO_STILLPICTURE was added back in 2005 but
it never worked because the command number is wrong.
Using the right command number means we have a better chance of them
actually doing the right thing, though clearly nobody has ever tried
it successfully.
I noticed these while auditing the remaining users of compat_time_t
for y2038 bugs. This one is fine in that regard, it just never did
anything.
Fixes: 6e87abd0b8cb ("[DVB]: Add compat ioctl handling.")
Signed-off-by: Arnd Bergmann <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/compat_ioctl.c | 10 ++++++----
1 file changed, 6 insertions(+), 4 deletions(-)
diff --git a/fs/compat_ioctl.c b/fs/compat_ioctl.c
index 4b7da4409c60c..5b832e83772a6 100644
--- a/fs/compat_ioctl.c
+++ b/fs/compat_ioctl.c
@@ -160,6 +160,7 @@ struct compat_video_event {
unsigned int frame_rate;
} u;
};
+#define VIDEO_GET_EVENT32 _IOR('o', 28, struct compat_video_event)
static int do_video_get_event(struct file *file,
unsigned int cmd, struct compat_video_event __user *up)
@@ -171,7 +172,7 @@ static int do_video_get_event(struct file *file,
if (kevent == NULL)
return -EFAULT;
- err = do_ioctl(file, cmd, (unsigned long)kevent);
+ err = do_ioctl(file, VIDEO_GET_EVENT, (unsigned long)kevent);
if (!err) {
err = convert_in_user(&kevent->type, &up->type);
err |= convert_in_user(&kevent->timestamp, &up->timestamp);
@@ -190,6 +191,7 @@ struct compat_video_still_picture {
compat_uptr_t iFrame;
int32_t size;
};
+#define VIDEO_STILLPICTURE32 _IOW('o', 30, struct compat_video_still_picture)
static int do_video_stillpicture(struct file *file,
unsigned int cmd, struct compat_video_still_picture __user *up)
@@ -212,7 +214,7 @@ static int do_video_stillpicture(struct file *file,
if (err)
return -EFAULT;
- err = do_ioctl(file, cmd, (unsigned long) up_native);
+ err = do_ioctl(file, VIDEO_STILLPICTURE, (unsigned long) up_native);
return err;
}
@@ -1484,9 +1486,9 @@ static long do_ioctl_trans(unsigned int cmd,
return rtc_ioctl(file, cmd, argp);
/* dvb */
- case VIDEO_GET_EVENT:
+ case VIDEO_GET_EVENT32:
return do_video_get_event(file, cmd, argp);
- case VIDEO_STILLPICTURE:
+ case VIDEO_STILLPICTURE32:
return do_video_stillpicture(file, cmd, argp);
case VIDEO_SET_SPU_PALETTE:
return do_video_set_spu_palette(file, cmd, argp);
--
2.20.1
From: Dan Carpenter <[email protected]>
[ Upstream commit b97760ae8e3dc8bb91881c13425a0bff55f2bd85 ]
Smatch complains about this condition:
if (has_config && num_pins >= 1)
The "has_config" variable is either uninitialized or true. The
"num_pins" variable is unsigned and we verified that it is non-zero on
the lines before so we know "num_pines >= 1" is true. Really, we could
just check "num_configs" directly and remove the "has_config" variable.
Fixes: 776180848b57 ("pinctrl: introduce driver for Atmel PIO4 controller")
Signed-off-by: Dan Carpenter <[email protected]>
Acked-by: Ludovic Desroches <[email protected]>
Signed-off-by: Linus Walleij <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/pinctrl/pinctrl-at91-pio4.c | 8 ++------
1 file changed, 2 insertions(+), 6 deletions(-)
diff --git a/drivers/pinctrl/pinctrl-at91-pio4.c b/drivers/pinctrl/pinctrl-at91-pio4.c
index 88ba9c50cc8ed..b596f45426ea0 100644
--- a/drivers/pinctrl/pinctrl-at91-pio4.c
+++ b/drivers/pinctrl/pinctrl-at91-pio4.c
@@ -479,7 +479,6 @@ static int atmel_pctl_dt_subnode_to_map(struct pinctrl_dev *pctldev,
unsigned num_pins, num_configs, reserve;
unsigned long *configs;
struct property *pins;
- bool has_config;
u32 pinfunc;
int ret, i;
@@ -495,9 +494,6 @@ static int atmel_pctl_dt_subnode_to_map(struct pinctrl_dev *pctldev,
return ret;
}
- if (num_configs)
- has_config = true;
-
num_pins = pins->length / sizeof(u32);
if (!num_pins) {
dev_err(pctldev->dev, "no pins found in node %s\n",
@@ -511,7 +507,7 @@ static int atmel_pctl_dt_subnode_to_map(struct pinctrl_dev *pctldev,
* map for each pin.
*/
reserve = 1;
- if (has_config && num_pins >= 1)
+ if (num_configs)
reserve++;
reserve *= num_pins;
ret = pinctrl_utils_reserve_map(pctldev, map, reserved_maps, num_maps,
@@ -534,7 +530,7 @@ static int atmel_pctl_dt_subnode_to_map(struct pinctrl_dev *pctldev,
pinctrl_utils_add_map_mux(pctldev, map, reserved_maps, num_maps,
group, func);
- if (has_config) {
+ if (num_configs) {
ret = pinctrl_utils_add_map_configs(pctldev, map,
reserved_maps, num_maps, group,
configs, num_configs,
--
2.20.1
From: Takashi Iwai <[email protected]>
[ Upstream commit 7064f376d4a10686f51c879401a569bb4babf9c6 ]
The interrupt handler has to be acquired after the other resource
initialization when allocated with IRQF_SHARED. Otherwise it's
triggered before the resource gets ready, and may lead to unpleasant
behavior.
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/pci/intel8x0m.c | 20 ++++++++++----------
1 file changed, 10 insertions(+), 10 deletions(-)
diff --git a/sound/pci/intel8x0m.c b/sound/pci/intel8x0m.c
index 1bc98c867133d..2286dfd72ff7e 100644
--- a/sound/pci/intel8x0m.c
+++ b/sound/pci/intel8x0m.c
@@ -1171,16 +1171,6 @@ static int snd_intel8x0m_create(struct snd_card *card,
}
port_inited:
- if (request_irq(pci->irq, snd_intel8x0m_interrupt, IRQF_SHARED,
- KBUILD_MODNAME, chip)) {
- dev_err(card->dev, "unable to grab IRQ %d\n", pci->irq);
- snd_intel8x0m_free(chip);
- return -EBUSY;
- }
- chip->irq = pci->irq;
- pci_set_master(pci);
- synchronize_irq(chip->irq);
-
/* initialize offsets */
chip->bdbars_count = 2;
tbl = intel_regs;
@@ -1224,11 +1214,21 @@ static int snd_intel8x0m_create(struct snd_card *card,
chip->int_sta_reg = ICH_REG_GLOB_STA;
chip->int_sta_mask = int_sta_masks;
+ pci_set_master(pci);
+
if ((err = snd_intel8x0m_chip_init(chip, 1)) < 0) {
snd_intel8x0m_free(chip);
return err;
}
+ if (request_irq(pci->irq, snd_intel8x0m_interrupt, IRQF_SHARED,
+ KBUILD_MODNAME, chip)) {
+ dev_err(card->dev, "unable to grab IRQ %d\n", pci->irq);
+ snd_intel8x0m_free(chip);
+ return -EBUSY;
+ }
+ chip->irq = pci->irq;
+
if ((err = snd_device_new(card, SNDRV_DEV_LOWLEVEL, chip, &ops)) < 0) {
snd_intel8x0m_free(chip);
return err;
--
2.20.1
From: Jay Foster <[email protected]>
[ Upstream commit 10af10db8c76fa5b9bf1f52a895c1cb2c0ac24da ]
Fix a typo. No functional change made by this patch.
Signed-off-by: Jay Foster <[email protected]>
Signed-off-by: Nicolas Ferre <[email protected]>
Signed-off-by: Alexandre Belloni <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm/boot/dts/at91sam9g45.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi b/arch/arm/boot/dts/at91sam9g45.dtsi
index b3501ae2a3bd1..4fba898b8f4f9 100644
--- a/arch/arm/boot/dts/at91sam9g45.dtsi
+++ b/arch/arm/boot/dts/at91sam9g45.dtsi
@@ -546,7 +546,7 @@
};
};
- uart1 {
+ usart1 {
pinctrl_usart1: usart1-0 {
atmel,pins =
<AT91_PIOB 4 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PB4 periph A with pullup */
--
2.20.1
From: Cong Wang <[email protected]>
[ Upstream commit 9708d2b5b7c648e8e0a40d11e8cea12f6277f33c ]
llc_sap_close() is called by llc_sap_put() which
could be called in BH context in llc_rcv(). We can't
block in BH.
There is no reason to block it here, kfree_rcu() should
be sufficient.
Signed-off-by: Cong Wang <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
include/net/llc.h | 1 +
net/llc/llc_core.c | 4 +---
2 files changed, 2 insertions(+), 3 deletions(-)
diff --git a/include/net/llc.h b/include/net/llc.h
index 82d989995d18a..95e5ced4c1339 100644
--- a/include/net/llc.h
+++ b/include/net/llc.h
@@ -66,6 +66,7 @@ struct llc_sap {
int sk_count;
struct hlist_nulls_head sk_laddr_hash[LLC_SK_LADDR_HASH_ENTRIES];
struct hlist_head sk_dev_hash[LLC_SK_DEV_HASH_ENTRIES];
+ struct rcu_head rcu;
};
static inline
diff --git a/net/llc/llc_core.c b/net/llc/llc_core.c
index e896a2c53b120..f1e442a39db8d 100644
--- a/net/llc/llc_core.c
+++ b/net/llc/llc_core.c
@@ -127,9 +127,7 @@ void llc_sap_close(struct llc_sap *sap)
list_del_rcu(&sap->node);
spin_unlock_bh(&llc_sap_list_lock);
- synchronize_rcu();
-
- kfree(sap);
+ kfree_rcu(sap, rcu);
}
static struct packet_type llc_packet_type __read_mostly = {
--
2.20.1
From: Tuomas Tynkkynen <[email protected]>
[ Upstream commit feef7918667b84f9d5653c501542dd8d84ae32af ]
Setting GPIO 21 high seems to be required to enable power to USB ports
on the WNDR3400v3. As there is already similar code for WNR3500L,
make the existing USB power GPIO code generic and use that.
Signed-off-by: Tuomas Tynkkynen <[email protected]>
Acked-by: Hauke Mehrtens <[email protected]>
Signed-off-by: Paul Burton <[email protected]>
Patchwork: https://patchwork.linux-mips.org/patch/20259/
Cc: Rafał Miłecki <[email protected]>
Cc: [email protected]
Cc: [email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
arch/mips/bcm47xx/workarounds.c | 8 +++++---
1 file changed, 5 insertions(+), 3 deletions(-)
diff --git a/arch/mips/bcm47xx/workarounds.c b/arch/mips/bcm47xx/workarounds.c
index e81ce4623070e..06fb94370c7c9 100644
--- a/arch/mips/bcm47xx/workarounds.c
+++ b/arch/mips/bcm47xx/workarounds.c
@@ -4,9 +4,8 @@
#include <bcm47xx_board.h>
#include <bcm47xx.h>
-static void __init bcm47xx_workarounds_netgear_wnr3500l(void)
+static void __init bcm47xx_workarounds_enable_usb_power(int usb_power)
{
- const int usb_power = 12;
int err;
err = gpio_request_one(usb_power, GPIOF_OUT_INIT_HIGH, "usb_power");
@@ -22,7 +21,10 @@ void __init bcm47xx_workarounds(void)
switch (board) {
case BCM47XX_BOARD_NETGEAR_WNR3500L:
- bcm47xx_workarounds_netgear_wnr3500l();
+ bcm47xx_workarounds_enable_usb_power(12);
+ break;
+ case BCM47XX_BOARD_NETGEAR_WNDR3400_V3:
+ bcm47xx_workarounds_enable_usb_power(21);
break;
default:
/* No workaround(s) needed */
--
2.20.1
From: Chuhong Yuan <[email protected]>
commit ba60cf9f78f0d7c8e73c7390608f7f818ee68aa0 upstream.
The driver forgets to destroy workqueue in remove() similarly to what is
done when probe() fails. Add a call to destroy_workqueue() to fix it.
Since unregistration will wait for the work to finish, we do not need to
cancel/flush the work instance in remove().
Signed-off-by: Chuhong Yuan <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Dmitry Torokhov <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/input/rmi4/rmi_f54.c | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/input/rmi4/rmi_f54.c
+++ b/drivers/input/rmi4/rmi_f54.c
@@ -744,6 +744,7 @@ static void rmi_f54_remove(struct rmi_fu
video_unregister_device(&f54->vdev);
v4l2_device_unregister(&f54->v4l2);
+ destroy_workqueue(f54->workqueue);
}
struct rmi_function_handler rmi_f54_handler = {
From: Alan Modra <[email protected]>
[ Upstream commit 56d20861c027498b5a1112b4f9f05b56d906fdda ]
Call Frame Information is used by gdb for back-traces and inserting
breakpoints on function return for the "finish" command. This failed
when inside __kernel_clock_gettime. More concerning than difficulty
debugging is that CFI is also used by stack frame unwinding code to
implement exceptions. If you have an app that needs to handle
asynchronous exceptions for some reason, and you are unlucky enough to
get one inside the VDSO time functions, your app will crash.
What's wrong: There is control flow in __kernel_clock_gettime that
reaches label 99 without saving lr in r12. CFI info however is
interpreted by the unwinder without reference to control flow: It's a
simple matter of "Execute all the CFI opcodes up to the current
address". That means the unwinder thinks r12 contains the return
address at label 99. Disabuse it of that notion by resetting CFI for
the return address at label 99.
Note that the ".cfi_restore lr" could have gone anywhere from the
"mtlr r12" a few instructions earlier to the instruction at label 99.
I put the CFI as late as possible, because in general that's best
practice (and if possible grouped with other CFI in order to reduce
the number of CFI opcodes executed when unwinding). Using r12 as the
return address is perfectly fine after the "mtlr r12" since r12 on
that code path still contains the return address.
__get_datapage also has a CFI error. That function temporarily saves
lr in r0, and reflects that fact with ".cfi_register lr,r0". A later
use of r0 means the CFI at that point isn't correct, as r0 no longer
contains the return address. Fix that too.
Signed-off-by: Alan Modra <[email protected]>
Tested-by: Reza Arbab <[email protected]>
Signed-off-by: Paul Mackerras <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/powerpc/kernel/vdso32/datapage.S | 1 +
arch/powerpc/kernel/vdso32/gettimeofday.S | 1 +
arch/powerpc/kernel/vdso64/datapage.S | 1 +
arch/powerpc/kernel/vdso64/gettimeofday.S | 1 +
4 files changed, 4 insertions(+)
diff --git a/arch/powerpc/kernel/vdso32/datapage.S b/arch/powerpc/kernel/vdso32/datapage.S
index 3745113fcc652..2a7eb5452aba7 100644
--- a/arch/powerpc/kernel/vdso32/datapage.S
+++ b/arch/powerpc/kernel/vdso32/datapage.S
@@ -37,6 +37,7 @@ data_page_branch:
mtlr r0
addi r3, r3, __kernel_datapage_offset-data_page_branch
lwz r0,0(r3)
+ .cfi_restore lr
add r3,r0,r3
blr
.cfi_endproc
diff --git a/arch/powerpc/kernel/vdso32/gettimeofday.S b/arch/powerpc/kernel/vdso32/gettimeofday.S
index 6b2b69616e776..7b341b86216c2 100644
--- a/arch/powerpc/kernel/vdso32/gettimeofday.S
+++ b/arch/powerpc/kernel/vdso32/gettimeofday.S
@@ -139,6 +139,7 @@ V_FUNCTION_BEGIN(__kernel_clock_gettime)
*/
99:
li r0,__NR_clock_gettime
+ .cfi_restore lr
sc
blr
.cfi_endproc
diff --git a/arch/powerpc/kernel/vdso64/datapage.S b/arch/powerpc/kernel/vdso64/datapage.S
index abf17feffe404..bf96686915116 100644
--- a/arch/powerpc/kernel/vdso64/datapage.S
+++ b/arch/powerpc/kernel/vdso64/datapage.S
@@ -37,6 +37,7 @@ data_page_branch:
mtlr r0
addi r3, r3, __kernel_datapage_offset-data_page_branch
lwz r0,0(r3)
+ .cfi_restore lr
add r3,r0,r3
blr
.cfi_endproc
diff --git a/arch/powerpc/kernel/vdso64/gettimeofday.S b/arch/powerpc/kernel/vdso64/gettimeofday.S
index 3820213248836..09b2a49f6dd53 100644
--- a/arch/powerpc/kernel/vdso64/gettimeofday.S
+++ b/arch/powerpc/kernel/vdso64/gettimeofday.S
@@ -124,6 +124,7 @@ V_FUNCTION_BEGIN(__kernel_clock_gettime)
*/
99:
li r0,__NR_clock_gettime
+ .cfi_restore lr
sc
blr
.cfi_endproc
--
2.20.1
From: Marek Szyprowski <[email protected]>
[ Upstream commit f8f3b7fc21b1cb59385b780acd9b9a26d04cb7b2 ]
Regulators, which are marked as 'on-in-suspend' seems to be critical for
board operation, thus they must not be disabled anytime. This can be
only assured by marking them as 'always-on', because otherwise some
actions of their clients might result in turning them off. This patch
restores suspend/resume operation on Peach-Pit Chromebook board. It
partially reverts 'always-on' property removal done by the commit
mentioned in the Fixes tag.
Fixes: 665c441eea3d ("ARM: dts: exynos: Remove unneded always-on for regulators on Peach boards")
Signed-off-by: Marek Szyprowski <[email protected]>
Tested-by: Tomasz Figa <[email protected]>
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm/boot/dts/exynos5420-peach-pit.dts | 3 +++
arch/arm/boot/dts/exynos5800-peach-pi.dts | 3 +++
2 files changed, 6 insertions(+)
diff --git a/arch/arm/boot/dts/exynos5420-peach-pit.dts b/arch/arm/boot/dts/exynos5420-peach-pit.dts
index 8b754ae8c8f7d..c9d379b1a1669 100644
--- a/arch/arm/boot/dts/exynos5420-peach-pit.dts
+++ b/arch/arm/boot/dts/exynos5420-peach-pit.dts
@@ -302,6 +302,7 @@
regulator-name = "vdd_1v35";
regulator-min-microvolt = <1350000>;
regulator-max-microvolt = <1350000>;
+ regulator-always-on;
regulator-boot-on;
regulator-state-mem {
regulator-on-in-suspend;
@@ -323,6 +324,7 @@
regulator-name = "vdd_2v";
regulator-min-microvolt = <2000000>;
regulator-max-microvolt = <2000000>;
+ regulator-always-on;
regulator-boot-on;
regulator-state-mem {
regulator-on-in-suspend;
@@ -333,6 +335,7 @@
regulator-name = "vdd_1v8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
+ regulator-always-on;
regulator-boot-on;
regulator-state-mem {
regulator-on-in-suspend;
diff --git a/arch/arm/boot/dts/exynos5800-peach-pi.dts b/arch/arm/boot/dts/exynos5800-peach-pi.dts
index 1f90df2d7ecd8..ae58b8d6f6144 100644
--- a/arch/arm/boot/dts/exynos5800-peach-pi.dts
+++ b/arch/arm/boot/dts/exynos5800-peach-pi.dts
@@ -302,6 +302,7 @@
regulator-name = "vdd_1v35";
regulator-min-microvolt = <1350000>;
regulator-max-microvolt = <1350000>;
+ regulator-always-on;
regulator-boot-on;
regulator-state-mem {
regulator-on-in-suspend;
@@ -323,6 +324,7 @@
regulator-name = "vdd_2v";
regulator-min-microvolt = <2000000>;
regulator-max-microvolt = <2000000>;
+ regulator-always-on;
regulator-boot-on;
regulator-state-mem {
regulator-on-in-suspend;
@@ -333,6 +335,7 @@
regulator-name = "vdd_1v8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
+ regulator-always-on;
regulator-boot-on;
regulator-state-mem {
regulator-on-in-suspend;
--
2.20.1
From: Patryk Małek <[email protected]>
[ Upstream commit 5907cf6c5bbe78be2ed18b875b316c6028b20634 ]
To prevent VF from deleting MAC address that was assigned by the
PF we need to check for that scenario when we try to delete a MAC
address from a VF.
Signed-off-by: Patryk Małek <[email protected]>
Tested-by: Andrew Bowers <[email protected]>
Signed-off-by: Jeff Kirsher <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c b/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c
index 54b8ee2583f14..7484ad3c955db 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c
@@ -2000,6 +2000,16 @@ static int i40e_vc_del_mac_addr_msg(struct i40e_vf *vf, u8 *msg, u16 msglen)
ret = I40E_ERR_INVALID_MAC_ADDR;
goto error_param;
}
+
+ if (vf->pf_set_mac &&
+ ether_addr_equal(al->list[i].addr,
+ vf->default_lan_addr.addr)) {
+ dev_err(&pf->pdev->dev,
+ "MAC addr %pM has been set by PF, cannot delete it for VF %d, reset VF to change MAC addr\n",
+ vf->default_lan_addr.addr, vf->vf_id);
+ ret = I40E_ERR_PARAM;
+ goto error_param;
+ }
}
vsi = pf->vsi[vf->lan_vsi_idx];
--
2.20.1
From: Mitch Williams <[email protected]>
[ Upstream commit 7eb74ff891b4e94b8bac48f648a21e4b94ddee64 ]
Caught by GCC 8. When we provide a length for strncpy, we should not
include the terminating null. So we must tell it one less than the size
of the destination buffer.
Signed-off-by: Mitch Williams <[email protected]>
Tested-by: Andrew Bowers <[email protected]>
Signed-off-by: Jeff Kirsher <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/intel/i40e/i40e_ptp.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/intel/i40e/i40e_ptp.c b/drivers/net/ethernet/intel/i40e/i40e_ptp.c
index f1feceab758a5..41cbcb0ac2d94 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_ptp.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_ptp.c
@@ -604,7 +604,8 @@ static long i40e_ptp_create_clock(struct i40e_pf *pf)
if (!IS_ERR_OR_NULL(pf->ptp_clock))
return 0;
- strncpy(pf->ptp_caps.name, i40e_driver_name, sizeof(pf->ptp_caps.name));
+ strncpy(pf->ptp_caps.name, i40e_driver_name,
+ sizeof(pf->ptp_caps.name) - 1);
pf->ptp_caps.owner = THIS_MODULE;
pf->ptp_caps.max_adj = 999999999;
pf->ptp_caps.n_ext_ts = 0;
--
2.20.1
From: Julian Wiedmann <[email protected]>
[ Upstream commit 4d19db777a2f32c9b76f6fd517ed8960576cb43e ]
Calling napi_schedule() from process context does not ensure that the
NET_RX softirq is run in a timely fashion. So trigger it manually.
This is no big issue with current code. A call to ndo_open() is usually
followed by a ndo_set_rx_mode() call, and for qeth this contains a
spin_unlock_bh(). Except for OSN, where qeth_l2_set_rx_mode() bails out
early.
Nevertheless it's best to not depend on this behaviour, and just fix
the issue at its source like all other drivers do. For instance see
commit 83a0c6e58901 ("i40e: Invoke softirqs after napi_reschedule").
Fixes: a1c3ed4c9ca0 ("qeth: NAPI support for l2 and l3 discipline")
Signed-off-by: Julian Wiedmann <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/s390/net/qeth_l2_main.c | 3 +++
drivers/s390/net/qeth_l3_main.c | 3 +++
2 files changed, 6 insertions(+)
diff --git a/drivers/s390/net/qeth_l2_main.c b/drivers/s390/net/qeth_l2_main.c
index 6ba4e921d2fd3..51152681aba6e 100644
--- a/drivers/s390/net/qeth_l2_main.c
+++ b/drivers/s390/net/qeth_l2_main.c
@@ -991,7 +991,10 @@ static int __qeth_l2_open(struct net_device *dev)
if (qdio_stop_irq(card->data.ccwdev, 0) >= 0) {
napi_enable(&card->napi);
+ local_bh_disable();
napi_schedule(&card->napi);
+ /* kick-start the NAPI softirq: */
+ local_bh_enable();
} else
rc = -EIO;
return rc;
diff --git a/drivers/s390/net/qeth_l3_main.c b/drivers/s390/net/qeth_l3_main.c
index 6e6ba1baf9c48..b40a61d9ad9ec 100644
--- a/drivers/s390/net/qeth_l3_main.c
+++ b/drivers/s390/net/qeth_l3_main.c
@@ -3005,7 +3005,10 @@ static int __qeth_l3_open(struct net_device *dev)
if (qdio_stop_irq(card->data.ccwdev, 0) >= 0) {
napi_enable(&card->napi);
+ local_bh_disable();
napi_schedule(&card->napi);
+ /* kick-start the NAPI softirq: */
+ local_bh_enable();
} else
rc = -EIO;
return rc;
--
2.20.1
From: Ludovic Desroches <[email protected]>
[ Upstream commit 0c3dfa176912b5f87732545598200fb55e9c1978 ]
Sharing the same irqchip with multiple gpiochips is not a good
practice. For instance, when installing hooks, we change the state
of the irqchip. The initial state of the irqchip for the second
gpiochip to register is then disrupted.
Signed-off-by: Ludovic Desroches <[email protected]>
Signed-off-by: Linus Walleij <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/pinctrl/pinctrl-at91.c | 28 ++++++++++++++--------------
1 file changed, 14 insertions(+), 14 deletions(-)
diff --git a/drivers/pinctrl/pinctrl-at91.c b/drivers/pinctrl/pinctrl-at91.c
index 9f09041859099..9401a0630e80b 100644
--- a/drivers/pinctrl/pinctrl-at91.c
+++ b/drivers/pinctrl/pinctrl-at91.c
@@ -1545,16 +1545,6 @@ void at91_pinctrl_gpio_resume(void)
#define gpio_irq_set_wake NULL
#endif /* CONFIG_PM */
-static struct irq_chip gpio_irqchip = {
- .name = "GPIO",
- .irq_ack = gpio_irq_ack,
- .irq_disable = gpio_irq_mask,
- .irq_mask = gpio_irq_mask,
- .irq_unmask = gpio_irq_unmask,
- /* .irq_set_type is set dynamically */
- .irq_set_wake = gpio_irq_set_wake,
-};
-
static void gpio_irq_handler(struct irq_desc *desc)
{
struct irq_chip *chip = irq_desc_get_chip(desc);
@@ -1595,12 +1585,22 @@ static int at91_gpio_of_irq_setup(struct platform_device *pdev,
struct gpio_chip *gpiochip_prev = NULL;
struct at91_gpio_chip *prev = NULL;
struct irq_data *d = irq_get_irq_data(at91_gpio->pioc_virq);
+ struct irq_chip *gpio_irqchip;
int ret, i;
+ gpio_irqchip = devm_kzalloc(&pdev->dev, sizeof(*gpio_irqchip), GFP_KERNEL);
+ if (!gpio_irqchip)
+ return -ENOMEM;
+
at91_gpio->pioc_hwirq = irqd_to_hwirq(d);
- /* Setup proper .irq_set_type function */
- gpio_irqchip.irq_set_type = at91_gpio->ops->irq_type;
+ gpio_irqchip->name = "GPIO";
+ gpio_irqchip->irq_ack = gpio_irq_ack;
+ gpio_irqchip->irq_disable = gpio_irq_mask;
+ gpio_irqchip->irq_mask = gpio_irq_mask;
+ gpio_irqchip->irq_unmask = gpio_irq_unmask;
+ gpio_irqchip->irq_set_wake = gpio_irq_set_wake,
+ gpio_irqchip->irq_set_type = at91_gpio->ops->irq_type;
/* Disable irqs of this PIO controller */
writel_relaxed(~0, at91_gpio->regbase + PIO_IDR);
@@ -1611,7 +1611,7 @@ static int at91_gpio_of_irq_setup(struct platform_device *pdev,
* interrupt.
*/
ret = gpiochip_irqchip_add(&at91_gpio->chip,
- &gpio_irqchip,
+ gpio_irqchip,
0,
handle_edge_irq,
IRQ_TYPE_NONE);
@@ -1629,7 +1629,7 @@ static int at91_gpio_of_irq_setup(struct platform_device *pdev,
if (!gpiochip_prev) {
/* Then register the chain on the parent IRQ */
gpiochip_set_chained_irqchip(&at91_gpio->chip,
- &gpio_irqchip,
+ gpio_irqchip,
at91_gpio->pioc_virq,
gpio_irq_handler);
return 0;
--
2.20.1
From: Stefan Wahren <[email protected]>
[ Upstream commit fa8cd98c06407b5798b927cd7fd14d30f360ed02 ]
We need to bail out if lan78xx_get_endpoints() fails, otherwise the
result is overwritten.
Fixes: 55d7de9de6c3 ("Microchip's LAN7800 family USB 2/3 to 10/100/1000 Ethernet")
Signed-off-by: Stefan Wahren <[email protected]>
Reviewed-by: Raghuram Chary Jallipalli <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/usb/lan78xx.c | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/drivers/net/usb/lan78xx.c b/drivers/net/usb/lan78xx.c
index e143a7fe93201..a3f9d8f05db4a 100644
--- a/drivers/net/usb/lan78xx.c
+++ b/drivers/net/usb/lan78xx.c
@@ -2621,6 +2621,11 @@ static int lan78xx_bind(struct lan78xx_net *dev, struct usb_interface *intf)
int i;
ret = lan78xx_get_endpoints(dev, intf);
+ if (ret) {
+ netdev_warn(dev->net, "lan78xx_get_endpoints failed: %d\n",
+ ret);
+ return ret;
+ }
dev->data[0] = (unsigned long)kzalloc(sizeof(*pdata), GFP_KERNEL);
--
2.20.1
From: Lucas Stach <[email protected]>
commit 003f01c780020daa9a06dea1db495b553a868c29 upstream.
The video buffer used by the queue is a vb2_v4l2_buffer, not a plain
vb2_buffer. Using the wrong type causes the allocation of the buffer
storage to be too small, causing a out of bounds write when
__init_vb2_v4l2_buffer initializes the buffer.
Signed-off-by: Lucas Stach <[email protected]>
Fixes: 3a762dbd5347 ("[media] Input: synaptics-rmi4 - add support for F54 diagnostics")
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Dmitry Torokhov <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/input/rmi4/rmi_f54.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/input/rmi4/rmi_f54.c
+++ b/drivers/input/rmi4/rmi_f54.c
@@ -364,7 +364,7 @@ static const struct vb2_ops rmi_f54_queu
static const struct vb2_queue rmi_f54_queue = {
.type = V4L2_BUF_TYPE_VIDEO_CAPTURE,
.io_modes = VB2_MMAP | VB2_USERPTR | VB2_DMABUF | VB2_READ,
- .buf_struct_size = sizeof(struct vb2_buffer),
+ .buf_struct_size = sizeof(struct vb2_v4l2_buffer),
.ops = &rmi_f54_queue_ops,
.mem_ops = &vb2_vmalloc_memops,
.timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC,
From: Sinan Kaya <[email protected]>
[ Upstream commit 1ad61b612b95980a4d970c52022aa01dfc0f6068 ]
If _OSC execution fails today for platforms without an _OSC entry, code is
printing a misleading message saying disabling ASPM as follows:
acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
We need to ensure that platform supports ASPM to begin with.
Reported-by: Michael Kelley <[email protected]>
Signed-off-by: Sinan Kaya <[email protected]>
Signed-off-by: Bjorn Helgaas <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/acpi/pci_root.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/drivers/acpi/pci_root.c b/drivers/acpi/pci_root.c
index b66815f35be6b..317ecc2e5757b 100644
--- a/drivers/acpi/pci_root.c
+++ b/drivers/acpi/pci_root.c
@@ -454,8 +454,9 @@ static void negotiate_os_control(struct acpi_pci_root *root, int *no_aspm)
decode_osc_support(root, "OS supports", support);
status = acpi_pci_osc_support(root, support);
if (ACPI_FAILURE(status)) {
- dev_info(&device->dev, "_OSC failed (%s); disabling ASPM\n",
- acpi_format_exception(status));
+ dev_info(&device->dev, "_OSC failed (%s)%s\n",
+ acpi_format_exception(status),
+ pcie_aspm_support_enabled() ? "; disabling ASPM" : "");
*no_aspm = 1;
return;
}
--
2.20.1
From: Anton Vasilyev <[email protected]>
[ Upstream commit 5963e8a3122471cadfe0eba41c4ceaeaa5c8bb4d ]
On the error path of mxs_auart_request_gpio_irq() is performed
backward iterating with index i of enum type. Underline enum type
may be unsigned char. In this case check (--i >= 0) will be always
true and error handling goes into infinite loop.
The patch changes the check so that it is valid for signed and unsigned
types.
Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: Anton Vasilyev <[email protected]>
Acked-by: Uwe Kleine-König <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/tty/serial/mxs-auart.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/tty/serial/mxs-auart.c b/drivers/tty/serial/mxs-auart.c
index 1d9d778828bae..515bf18c82943 100644
--- a/drivers/tty/serial/mxs-auart.c
+++ b/drivers/tty/serial/mxs-auart.c
@@ -1635,8 +1635,9 @@ static int mxs_auart_request_gpio_irq(struct mxs_auart_port *s)
/*
* If something went wrong, rollback.
+ * Be careful: i may be unsigned.
*/
- while (err && (--i >= 0))
+ while (err && (i-- > 0))
if (irq[i] >= 0)
free_irq(irq[i], s);
--
2.20.1
From: Håkon Bugge <[email protected]>
[ Upstream commit 802fa45cd320de319e86c93bca72abec028ba059 ]
Commit f27b4746f378 ("i40iw: add connection management code") uses an
incorrect rcu iterator, whilst holding the rtnl_lock. Since the
critical region invokes i40iw_manage_qhash(), which is a sleeping
function, the rcu locking and traversal cannot be used.
Signed-off-by: Håkon Bugge <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/infiniband/hw/i40iw/i40iw_cm.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/infiniband/hw/i40iw/i40iw_cm.c b/drivers/infiniband/hw/i40iw/i40iw_cm.c
index 85637696f6e96..282a726351c81 100644
--- a/drivers/infiniband/hw/i40iw/i40iw_cm.c
+++ b/drivers/infiniband/hw/i40iw/i40iw_cm.c
@@ -1652,7 +1652,7 @@ static enum i40iw_status_code i40iw_add_mqh_6(struct i40iw_device *iwdev,
unsigned long flags;
rtnl_lock();
- for_each_netdev_rcu(&init_net, ip_dev) {
+ for_each_netdev(&init_net, ip_dev) {
if ((((rdma_vlan_dev_vlan_id(ip_dev) < I40IW_NO_VLAN) &&
(rdma_vlan_dev_real_dev(ip_dev) == iwdev->netdev)) ||
(ip_dev == iwdev->netdev)) && (ip_dev->flags & IFF_UP)) {
--
2.20.1
From: Andreas Kemnade <[email protected]>
[ Upstream commit 8314c212f995bc0d06b54ad02ef0ab4089781540 ]
the charging current uses unsigned int variables, if we step back
if the current is still low, we would run into negative which
means setting the target to a huge value.
Better add checks here.
Signed-off-by: Andreas Kemnade <[email protected]>
Signed-off-by: Sebastian Reichel <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/power/supply/twl4030_charger.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/power/supply/twl4030_charger.c b/drivers/power/supply/twl4030_charger.c
index bcd4dc304f270..14fed11e8f6e3 100644
--- a/drivers/power/supply/twl4030_charger.c
+++ b/drivers/power/supply/twl4030_charger.c
@@ -449,7 +449,8 @@ static void twl4030_current_worker(struct work_struct *data)
if (v < USB_MIN_VOLT) {
/* Back up and stop adjusting. */
- bci->usb_cur -= USB_CUR_STEP;
+ if (bci->usb_cur >= USB_CUR_STEP)
+ bci->usb_cur -= USB_CUR_STEP;
bci->usb_cur_target = bci->usb_cur;
} else if (bci->usb_cur >= bci->usb_cur_target ||
bci->usb_cur + USB_CUR_STEP > USB_MAX_CURRENT) {
--
2.20.1
From: Ganesh Goudar <[email protected]>
[ Upstream commit 0dc235afc59a226d951352b0adf4a89b532a9d13 ]
Do not put host-endian 0 or 1 into big endian feild.
Reported-by: Al Viro <[email protected]>
Signed-off-by: Ganesh Goudar <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/chelsio/cxgb4/t4_hw.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c b/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c
index ebeeb3581b9c5..b4b435276a18d 100644
--- a/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c
+++ b/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c
@@ -3541,7 +3541,7 @@ int t4_fwcache(struct adapter *adap, enum fw_params_param_dev_fwcache op)
c.param[0].mnem =
cpu_to_be32(FW_PARAMS_MNEM_V(FW_PARAMS_MNEM_DEV) |
FW_PARAMS_PARAM_X_V(FW_PARAMS_PARAM_DEV_FWCACHE));
- c.param[0].val = (__force __be32)op;
+ c.param[0].val = cpu_to_be32(op);
return t4_wr_mbox(adap, adap->mbox, &c, sizeof(c), NULL);
}
--
2.20.1
From: Andreas Kemnade <[email protected]>
[ Upstream commit 079cdff3d0a09c5da10ae1be35def7a116776328 ]
This avoids getting woken up from suspend after power interruptions
when the bci wrongly thinks the battery is full just because
of input current going low because of low input power
Signed-off-by: Andreas Kemnade <[email protected]>
Signed-off-by: Sebastian Reichel <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/power/supply/twl4030_charger.c | 27 +++++++++++++++++++++++++-
1 file changed, 26 insertions(+), 1 deletion(-)
diff --git a/drivers/power/supply/twl4030_charger.c b/drivers/power/supply/twl4030_charger.c
index 14fed11e8f6e3..5b1f147b11cb0 100644
--- a/drivers/power/supply/twl4030_charger.c
+++ b/drivers/power/supply/twl4030_charger.c
@@ -469,6 +469,7 @@ static void twl4030_current_worker(struct work_struct *data)
static int twl4030_charger_enable_usb(struct twl4030_bci *bci, bool enable)
{
int ret;
+ u32 reg;
if (bci->usb_mode == CHARGE_OFF)
enable = false;
@@ -482,14 +483,38 @@ static int twl4030_charger_enable_usb(struct twl4030_bci *bci, bool enable)
bci->usb_enabled = 1;
}
- if (bci->usb_mode == CHARGE_AUTO)
+ if (bci->usb_mode == CHARGE_AUTO) {
+ /* Enable interrupts now. */
+ reg = ~(u32)(TWL4030_ICHGLOW | TWL4030_ICHGEOC |
+ TWL4030_TBATOR2 | TWL4030_TBATOR1 |
+ TWL4030_BATSTS);
+ ret = twl_i2c_write_u8(TWL4030_MODULE_INTERRUPTS, reg,
+ TWL4030_INTERRUPTS_BCIIMR1A);
+ if (ret < 0) {
+ dev_err(bci->dev,
+ "failed to unmask interrupts: %d\n",
+ ret);
+ return ret;
+ }
/* forcing the field BCIAUTOUSB (BOOT_BCI[1]) to 1 */
ret = twl4030_clear_set_boot_bci(0, TWL4030_BCIAUTOUSB);
+ }
/* forcing USBFASTMCHG(BCIMFSTS4[2]) to 1 */
ret = twl4030_clear_set(TWL_MODULE_MAIN_CHARGE, 0,
TWL4030_USBFASTMCHG, TWL4030_BCIMFSTS4);
if (bci->usb_mode == CHARGE_LINEAR) {
+ /* Enable interrupts now. */
+ reg = ~(u32)(TWL4030_ICHGLOW | TWL4030_TBATOR2 |
+ TWL4030_TBATOR1 | TWL4030_BATSTS);
+ ret = twl_i2c_write_u8(TWL4030_MODULE_INTERRUPTS, reg,
+ TWL4030_INTERRUPTS_BCIIMR1A);
+ if (ret < 0) {
+ dev_err(bci->dev,
+ "failed to unmask interrupts: %d\n",
+ ret);
+ return ret;
+ }
twl4030_clear_set_boot_bci(TWL4030_BCIAUTOAC|TWL4030_CVENAC, 0);
/* Watch dog key: WOVF acknowledge */
ret = twl_i2c_write_u8(TWL_MODULE_MAIN_CHARGE, 0x33,
--
2.20.1
From: YueHaibing <[email protected]>
[ Upstream commit 81255af8d9d5565004792c295dde49344df450ca ]
The method ndo_start_xmit() is defined as returning an 'netdev_tx_t',
which is a typedef for an enum type, so make sure the implementation in
this driver has returns 'netdev_tx_t' value, and change the function
return type to netdev_tx_t.
Found by coccinelle.
Signed-off-by: YueHaibing <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/xilinx/ll_temac_main.c | 3 ++-
drivers/net/ethernet/xilinx/xilinx_axienet_main.c | 3 ++-
drivers/net/ethernet/xilinx/xilinx_emaclite.c | 9 +++++----
3 files changed, 9 insertions(+), 6 deletions(-)
diff --git a/drivers/net/ethernet/xilinx/ll_temac_main.c b/drivers/net/ethernet/xilinx/ll_temac_main.c
index a9bd665fd1225..545f60877bb7d 100644
--- a/drivers/net/ethernet/xilinx/ll_temac_main.c
+++ b/drivers/net/ethernet/xilinx/ll_temac_main.c
@@ -673,7 +673,8 @@ static inline int temac_check_tx_bd_space(struct temac_local *lp, int num_frag)
return 0;
}
-static int temac_start_xmit(struct sk_buff *skb, struct net_device *ndev)
+static netdev_tx_t
+temac_start_xmit(struct sk_buff *skb, struct net_device *ndev)
{
struct temac_local *lp = netdev_priv(ndev);
struct cdmac_bd *cur_p;
diff --git a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
index 5f21ddff9e0f9..46fcf3ec2caf7 100644
--- a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
+++ b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
@@ -655,7 +655,8 @@ static inline int axienet_check_tx_bd_space(struct axienet_local *lp,
* start the transmission. Additionally if checksum offloading is supported,
* it populates AXI Stream Control fields with appropriate values.
*/
-static int axienet_start_xmit(struct sk_buff *skb, struct net_device *ndev)
+static netdev_tx_t
+axienet_start_xmit(struct sk_buff *skb, struct net_device *ndev)
{
u32 ii;
u32 num_frag;
diff --git a/drivers/net/ethernet/xilinx/xilinx_emaclite.c b/drivers/net/ethernet/xilinx/xilinx_emaclite.c
index aa02a03a6d8db..034b36442ee75 100644
--- a/drivers/net/ethernet/xilinx/xilinx_emaclite.c
+++ b/drivers/net/ethernet/xilinx/xilinx_emaclite.c
@@ -1005,9 +1005,10 @@ static int xemaclite_close(struct net_device *dev)
* deferred and the Tx queue is stopped so that the deferred socket buffer can
* be transmitted when the Emaclite device is free to transmit data.
*
- * Return: 0, always.
+ * Return: NETDEV_TX_OK, always.
*/
-static int xemaclite_send(struct sk_buff *orig_skb, struct net_device *dev)
+static netdev_tx_t
+xemaclite_send(struct sk_buff *orig_skb, struct net_device *dev)
{
struct net_local *lp = netdev_priv(dev);
struct sk_buff *new_skb;
@@ -1028,7 +1029,7 @@ static int xemaclite_send(struct sk_buff *orig_skb, struct net_device *dev)
/* Take the time stamp now, since we can't do this in an ISR. */
skb_tx_timestamp(new_skb);
spin_unlock_irqrestore(&lp->reset_lock, flags);
- return 0;
+ return NETDEV_TX_OK;
}
spin_unlock_irqrestore(&lp->reset_lock, flags);
@@ -1037,7 +1038,7 @@ static int xemaclite_send(struct sk_buff *orig_skb, struct net_device *dev)
dev->stats.tx_bytes += len;
dev_consume_skb_any(new_skb);
- return 0;
+ return NETDEV_TX_OK;
}
/**
--
2.20.1
From: Petr Machata <[email protected]>
[ Upstream commit a9f36656b519a9a21309793c306941a3cd0eeb8f ]
With introduction of MC-aware mode to mlxsw, it became necessary to
configure TCs above 7 as well. There is now code in mlxsw to disable ETS
for these higher classes, but disablement of max shaper was neglected.
By default, max shaper is currently disabled to begin with, so the
problem is just cosmetic. However, for symmetry, do like we do for ETS
configuration, and call mlxsw_sp_port_ets_maxrate_set() for both TC i
and i + 8.
Signed-off-by: Petr Machata <[email protected]>
Reviewed-by: Jiri Pirko <[email protected]>
Signed-off-by: Ido Schimmel <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/mellanox/mlxsw/spectrum.c | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/drivers/net/ethernet/mellanox/mlxsw/spectrum.c b/drivers/net/ethernet/mellanox/mlxsw/spectrum.c
index 585a40cc6470b..8460c4807567c 100644
--- a/drivers/net/ethernet/mellanox/mlxsw/spectrum.c
+++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum.c
@@ -2191,6 +2191,13 @@ static int mlxsw_sp_port_ets_init(struct mlxsw_sp_port *mlxsw_sp_port)
MLXSW_REG_QEEC_MAS_DIS);
if (err)
return err;
+
+ err = mlxsw_sp_port_ets_maxrate_set(mlxsw_sp_port,
+ MLXSW_REG_QEEC_HIERARCY_TC,
+ i + 8, i,
+ MLXSW_REG_QEEC_MAS_DIS);
+ if (err)
+ return err;
}
/* Map all priorities to traffic class 0. */
--
2.20.1
From: Chao Yu <[email protected]>
[ Upstream commit dc4cd1257c86451cec3e8e352cc376348e4f4af4 ]
Step to reproduce this bug:
1. logon as root
2. mount -t f2fs /dev/sdd /mnt;
3. touch /mnt/file;
4. chown system /mnt/file; chgrp system /mnt/file;
5. xfs_io -f /mnt/file -c "fsync";
6. godown /mnt;
7. umount /mnt;
8. mount -t f2fs /dev/sdd /mnt;
After step 8) we will expect file's uid/gid are all system, but during
recovery, these two fields were not been recovered, fix it.
Signed-off-by: Chao Yu <[email protected]>
Signed-off-by: Jaegeuk Kim <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/f2fs/recovery.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/fs/f2fs/recovery.c b/fs/f2fs/recovery.c
index 9de1480a86bd3..e87b7d7e80fc7 100644
--- a/fs/f2fs/recovery.c
+++ b/fs/f2fs/recovery.c
@@ -179,6 +179,8 @@ static void recover_inode(struct inode *inode, struct page *page)
char *name;
inode->i_mode = le16_to_cpu(raw->i_mode);
+ i_uid_write(inode, le32_to_cpu(raw->i_uid));
+ i_gid_write(inode, le32_to_cpu(raw->i_gid));
f2fs_i_size_write(inode, le64_to_cpu(raw->i_size));
inode->i_atime.tv_sec = le64_to_cpu(raw->i_mtime);
inode->i_ctime.tv_sec = le64_to_cpu(raw->i_ctime);
--
2.20.1
From: Eric W. Biederman <[email protected]>
[ Upstream commit 4a63c1ffd384ebdce40aac9c997dab68379137be ]
For userspace to tell the difference between an random signal
and an exception, the exception must include siginfo information.
Using SEND_SIG_FORCED for SIGSEGV is thus wrong, and it will result in
userspace seeing si_code == SI_USER (like a random signal) instead of
si_code == SI_KERNEL or a more specific si_code as all exceptions
deliver.
Therefore replace force_sig_info(SIGSEGV, SEND_SIG_FORCE, current)
with force_sig(SIG_SEGV, current) which gets this right and is shorter
and easier to type.
Fixes: 791eca10107f ("uretprobes/x86: Hijack return address")
Reviewed-by: Thomas Gleixner <[email protected]>
Signed-off-by: "Eric W. Biederman" <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/x86/kernel/uprobes.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/x86/kernel/uprobes.c b/arch/x86/kernel/uprobes.c
index e35466afe989d..eac679ab543f6 100644
--- a/arch/x86/kernel/uprobes.c
+++ b/arch/x86/kernel/uprobes.c
@@ -983,7 +983,7 @@ arch_uretprobe_hijack_return_addr(unsigned long trampoline_vaddr, struct pt_regs
pr_err("uprobe: return address clobbered: pid=%d, %%sp=%#lx, "
"%%ip=%#lx\n", current->pid, regs->sp, regs->ip);
- force_sig_info(SIGSEGV, SEND_SIG_FORCED, current);
+ force_sig(SIGSEGV, current);
}
return -1;
--
2.20.1
From: Dan Carpenter <[email protected]>
[ Upstream commit 54baff8d4e5dce2cef61953b1dc22079cda1ddb1 ]
If kstrtoul() fails then we print "charge_full" when it's uninitialized.
The debug printk doesn't add anything so I deleted it and cleaned these
two functions up a bit.
Signed-off-by: Dan Carpenter <[email protected]>
Signed-off-by: Sebastian Reichel <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/power/supply/ab8500_fg.c | 31 ++++++++++++-------------------
1 file changed, 12 insertions(+), 19 deletions(-)
diff --git a/drivers/power/supply/ab8500_fg.c b/drivers/power/supply/ab8500_fg.c
index 2199f673118c0..ea8c26a108f00 100644
--- a/drivers/power/supply/ab8500_fg.c
+++ b/drivers/power/supply/ab8500_fg.c
@@ -2437,17 +2437,14 @@ static ssize_t charge_full_store(struct ab8500_fg *di, const char *buf,
size_t count)
{
unsigned long charge_full;
- ssize_t ret;
+ int ret;
ret = kstrtoul(buf, 10, &charge_full);
+ if (ret)
+ return ret;
- dev_dbg(di->dev, "Ret %zd charge_full %lu", ret, charge_full);
-
- if (!ret) {
- di->bat_cap.max_mah = (int) charge_full;
- ret = count;
- }
- return ret;
+ di->bat_cap.max_mah = (int) charge_full;
+ return count;
}
static ssize_t charge_now_show(struct ab8500_fg *di, char *buf)
@@ -2459,20 +2456,16 @@ static ssize_t charge_now_store(struct ab8500_fg *di, const char *buf,
size_t count)
{
unsigned long charge_now;
- ssize_t ret;
+ int ret;
ret = kstrtoul(buf, 10, &charge_now);
+ if (ret)
+ return ret;
- dev_dbg(di->dev, "Ret %zd charge_now %lu was %d",
- ret, charge_now, di->bat_cap.prev_mah);
-
- if (!ret) {
- di->bat_cap.user_mah = (int) charge_now;
- di->flags.user_cap = true;
- ret = count;
- queue_delayed_work(di->fg_wq, &di->fg_periodic_work, 0);
- }
- return ret;
+ di->bat_cap.user_mah = (int) charge_now;
+ di->flags.user_cap = true;
+ queue_delayed_work(di->fg_wq, &di->fg_periodic_work, 0);
+ return count;
}
static struct ab8500_fg_sysfs_entry charge_full_attr =
--
2.20.1
From: Patryk Małek <[email protected]>
[ Upstream commit 5cba17b14182696d6bb0ec83a1d087933f252241 ]
Hold the rtnl lock when we're clearing interrupt scheme
in i40e_shutdown and in i40e_remove.
Signed-off-by: Patryk Małek <[email protected]>
Tested-by: Andrew Bowers <[email protected]>
Signed-off-by: Jeff Kirsher <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/intel/i40e/i40e_main.c | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c
index 886378c5334fa..043b69b5843b0 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_main.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_main.c
@@ -11360,6 +11360,7 @@ static void i40e_remove(struct pci_dev *pdev)
mutex_destroy(&hw->aq.asq_mutex);
/* Clear all dynamic memory lists of rings, q_vectors, and VSIs */
+ rtnl_lock();
i40e_clear_interrupt_scheme(pf);
for (i = 0; i < pf->num_alloc_vsi; i++) {
if (pf->vsi[i]) {
@@ -11368,6 +11369,7 @@ static void i40e_remove(struct pci_dev *pdev)
pf->vsi[i] = NULL;
}
}
+ rtnl_unlock();
for (i = 0; i < I40E_MAX_VEB; i++) {
kfree(pf->veb[i]);
@@ -11513,7 +11515,13 @@ static void i40e_shutdown(struct pci_dev *pdev)
wr32(hw, I40E_PFPM_WUFC,
(pf->wol_en ? I40E_PFPM_WUFC_MAG_MASK : 0));
+ /* Since we're going to destroy queues during the
+ * i40e_clear_interrupt_scheme() we should hold the RTNL lock for this
+ * whole section
+ */
+ rtnl_lock();
i40e_clear_interrupt_scheme(pf);
+ rtnl_unlock();
if (system_state == SYSTEM_POWER_OFF) {
pci_wake_from_d3(pdev, pf->wol_en);
--
2.20.1
From: Dan Carpenter <[email protected]>
[ Upstream commit 461cf036057477805a8a391e5fd0f5264a5e56a8 ]
We tried to revert commit d9c52fd17cb4 ("ath9k: fix tx99 with monitor
mode interface") but accidentally missed part of the locking change.
The lock has to be held earlier so that we're holding it when we do
"sc->tx99_vif = vif;" and also there in the current code there is a
stray unlock before we have taken the lock.
Fixes: 6df0580be8bc ("ath9k: add back support for using active monitor interfaces for tx99")
Signed-off-by: Dan Carpenter <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/ath/ath9k/main.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c
index f6151a00041d6..abc997427bae5 100644
--- a/drivers/net/wireless/ath/ath9k/main.c
+++ b/drivers/net/wireless/ath/ath9k/main.c
@@ -1249,6 +1249,7 @@ static int ath9k_add_interface(struct ieee80211_hw *hw,
struct ath_vif *avp = (void *)vif->drv_priv;
struct ath_node *an = &avp->mcast_node;
+ mutex_lock(&sc->mutex);
if (IS_ENABLED(CONFIG_ATH9K_TX99)) {
if (sc->cur_chan->nvifs >= 1) {
mutex_unlock(&sc->mutex);
@@ -1257,8 +1258,6 @@ static int ath9k_add_interface(struct ieee80211_hw *hw,
sc->tx99_vif = vif;
}
- mutex_lock(&sc->mutex);
-
ath_dbg(common, CONFIG, "Attach a VIF of type: %d\n", vif->type);
sc->cur_chan->nvifs++;
--
2.20.1
From: Shahed Shaikh <[email protected]>
[ Upstream commit 75a110a1783ef8324ffd763b24f4ac268253cbca ]
This is a workaround for FW bug -
MFW generates bandwidth attention in single function mode, which
is only expected to be generated in multi function mode.
This undesired attention in SF mode results in incorrect HW
configuration and resulting into Tx timeout.
Signed-off-by: Shahed Shaikh <[email protected]>
Signed-off-by: Ariel Elior <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
index a9681b191304a..ce8a777b1e975 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
@@ -3540,6 +3540,16 @@ static void bnx2x_drv_info_iscsi_stat(struct bnx2x *bp)
*/
static void bnx2x_config_mf_bw(struct bnx2x *bp)
{
+ /* Workaround for MFW bug.
+ * MFW is not supposed to generate BW attention in
+ * single function mode.
+ */
+ if (!IS_MF(bp)) {
+ DP(BNX2X_MSG_MCP,
+ "Ignoring MF BW config in single function mode\n");
+ return;
+ }
+
if (bp->link_vars.link_up) {
bnx2x_cmng_fns_init(bp, true, CMNG_FNS_MINMAX);
bnx2x_link_sync_notify(bp);
--
2.20.1
From: Deepak Ukey <[email protected]>
[ Upstream commit 76cb25b058034d37244be6aca97a2ad52a5fbcad ]
For the function dma_unmap_sg(), the <nents> parameter should be number of
elements in the scatter list prior to the mapping, not after the mapping.
Signed-off-by: Deepak Ukey <[email protected]>
Signed-off-by: Viswas G <[email protected]>
Acked-by: Jack Wang <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/scsi/pm8001/pm8001_sas.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/scsi/pm8001/pm8001_sas.c b/drivers/scsi/pm8001/pm8001_sas.c
index ce584c31d36e5..d1fcd21f7f7dd 100644
--- a/drivers/scsi/pm8001/pm8001_sas.c
+++ b/drivers/scsi/pm8001/pm8001_sas.c
@@ -466,7 +466,7 @@ err_out:
dev_printk(KERN_ERR, pm8001_ha->dev, "pm8001 exec failed[%d]!\n", rc);
if (!sas_protocol_ata(t->task_proto))
if (n_elem)
- dma_unmap_sg(pm8001_ha->dev, t->scatter, n_elem,
+ dma_unmap_sg(pm8001_ha->dev, t->scatter, t->num_scatter,
t->data_dir);
out_done:
spin_unlock_irqrestore(&pm8001_ha->lock, flags);
--
2.20.1
From: YueHaibing <[email protected]>
[ Upstream commit 2b49117a5abee8478b0470cba46ac74f93b4a479 ]
The method ndo_start_xmit() is defined as returning an 'netdev_tx_t',
which is a typedef for an enum type, so make sure the implementation in
this driver has returns 'netdev_tx_t' value, and change the function
return type to netdev_tx_t.
Found by coccinelle.
Signed-off-by: YueHaibing <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/micrel/ks8695net.c | 2 +-
drivers/net/ethernet/micrel/ks8851_mll.c | 4 ++--
2 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/net/ethernet/micrel/ks8695net.c b/drivers/net/ethernet/micrel/ks8695net.c
index 20cb85bc0c5f8..6135d90f368fa 100644
--- a/drivers/net/ethernet/micrel/ks8695net.c
+++ b/drivers/net/ethernet/micrel/ks8695net.c
@@ -1156,7 +1156,7 @@ ks8695_timeout(struct net_device *ndev)
* sk_buff and adds it to the TX ring. It then kicks the TX DMA
* engine to ensure transmission begins.
*/
-static int
+static netdev_tx_t
ks8695_start_xmit(struct sk_buff *skb, struct net_device *ndev)
{
struct ks8695_priv *ksp = netdev_priv(ndev);
diff --git a/drivers/net/ethernet/micrel/ks8851_mll.c b/drivers/net/ethernet/micrel/ks8851_mll.c
index 2fc5cd56c0a84..8dc1f0277117d 100644
--- a/drivers/net/ethernet/micrel/ks8851_mll.c
+++ b/drivers/net/ethernet/micrel/ks8851_mll.c
@@ -1020,9 +1020,9 @@ static void ks_write_qmu(struct ks_net *ks, u8 *pdata, u16 len)
* spin_lock_irqsave is required because tx and rx should be mutual exclusive.
* So while tx is in-progress, prevent IRQ interrupt from happenning.
*/
-static int ks_start_xmit(struct sk_buff *skb, struct net_device *netdev)
+static netdev_tx_t ks_start_xmit(struct sk_buff *skb, struct net_device *netdev)
{
- int retv = NETDEV_TX_OK;
+ netdev_tx_t retv = NETDEV_TX_OK;
struct ks_net *ks = netdev_priv(netdev);
disable_irq(netdev->irq);
--
2.20.1
From: Srinivas Kandagatla <[email protected]>
[ Upstream commit ca6ac25cecf0e740d7cc8e03e0ebbf8acbeca3df ]
nvmem_device_get() should return ERR_PTR() on error or valid pointer
on success, but one of the code path seems to return NULL, so fix it.
Reported-by: Niklas Cassel <[email protected]>
Signed-off-by: Srinivas Kandagatla <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/nvmem/core.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/nvmem/core.c b/drivers/nvmem/core.c
index 9ca24e4d5d49c..2a0c5f3b0e509 100644
--- a/drivers/nvmem/core.c
+++ b/drivers/nvmem/core.c
@@ -609,7 +609,7 @@ static struct nvmem_device *nvmem_find(const char *name)
d = bus_find_device(&nvmem_bus_type, NULL, (void *)name, nvmem_match);
if (!d)
- return NULL;
+ return ERR_PTR(-ENOENT);
return to_nvmem_device(d);
}
--
2.20.1
From: Deepak Ukey <[email protected]>
[ Upstream commit 72349b62a571effd6faadd0600b8e657dd87afbf ]
When the firmware is not responding, execution of kexec boot causes a system
hang. When firmware assertion happened, driver get notified with interrupt
vector updated in MPI configuration table. Then, the driver will read
scratchpad register and set controller_fatal_error flag to true.
Signed-off-by: Deepak Ukey <[email protected]>
Signed-off-by: Viswas G <[email protected]>
Acked-by: Jack Wang <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/scsi/pm8001/pm8001_hwi.c | 6 +++
drivers/scsi/pm8001/pm8001_sas.c | 7 +++
drivers/scsi/pm8001/pm8001_sas.h | 1 +
drivers/scsi/pm8001/pm80xx_hwi.c | 80 +++++++++++++++++++++++++++++---
drivers/scsi/pm8001/pm80xx_hwi.h | 3 ++
5 files changed, 91 insertions(+), 6 deletions(-)
diff --git a/drivers/scsi/pm8001/pm8001_hwi.c b/drivers/scsi/pm8001/pm8001_hwi.c
index 10546faac58c6..f374abfb7f1f8 100644
--- a/drivers/scsi/pm8001/pm8001_hwi.c
+++ b/drivers/scsi/pm8001/pm8001_hwi.c
@@ -1479,6 +1479,12 @@ u32 pm8001_mpi_msg_consume(struct pm8001_hba_info *pm8001_ha,
} else {
u32 producer_index;
void *pi_virt = circularQ->pi_virt;
+ /* spurious interrupt during setup if
+ * kexec-ing and driver doing a doorbell access
+ * with the pre-kexec oq interrupt setup
+ */
+ if (!pi_virt)
+ break;
/* Update the producer index from SPC */
producer_index = pm8001_read_32(pi_virt);
circularQ->producer_index = cpu_to_le32(producer_index);
diff --git a/drivers/scsi/pm8001/pm8001_sas.c b/drivers/scsi/pm8001/pm8001_sas.c
index d1fcd21f7f7dd..e64a13f0bce17 100644
--- a/drivers/scsi/pm8001/pm8001_sas.c
+++ b/drivers/scsi/pm8001/pm8001_sas.c
@@ -374,6 +374,13 @@ static int pm8001_task_exec(struct sas_task *task,
return 0;
}
pm8001_ha = pm8001_find_ha_by_dev(task->dev);
+ if (pm8001_ha->controller_fatal_error) {
+ struct task_status_struct *ts = &t->task_status;
+
+ ts->resp = SAS_TASK_UNDELIVERED;
+ t->task_done(t);
+ return 0;
+ }
PM8001_IO_DBG(pm8001_ha, pm8001_printk("pm8001_task_exec device \n "));
spin_lock_irqsave(&pm8001_ha->lock, flags);
do {
diff --git a/drivers/scsi/pm8001/pm8001_sas.h b/drivers/scsi/pm8001/pm8001_sas.h
index 6628cc38316c2..d8768ac41ebbf 100644
--- a/drivers/scsi/pm8001/pm8001_sas.h
+++ b/drivers/scsi/pm8001/pm8001_sas.h
@@ -531,6 +531,7 @@ struct pm8001_hba_info {
u32 logging_level;
u32 fw_status;
u32 smp_exp_mode;
+ bool controller_fatal_error;
const struct firmware *fw_image;
struct isr_param irq_vector[PM8001_MAX_MSIX_VEC];
};
diff --git a/drivers/scsi/pm8001/pm80xx_hwi.c b/drivers/scsi/pm8001/pm80xx_hwi.c
index eb4fee61df729..9edd61c063a1a 100644
--- a/drivers/scsi/pm8001/pm80xx_hwi.c
+++ b/drivers/scsi/pm8001/pm80xx_hwi.c
@@ -572,6 +572,9 @@ static void update_main_config_table(struct pm8001_hba_info *pm8001_ha)
pm8001_ha->main_cfg_tbl.pm80xx_tbl.pcs_event_log_size);
pm8001_mw32(address, MAIN_PCS_EVENT_LOG_OPTION,
pm8001_ha->main_cfg_tbl.pm80xx_tbl.pcs_event_log_severity);
+ /* Update Fatal error interrupt vector */
+ pm8001_ha->main_cfg_tbl.pm80xx_tbl.fatal_err_interrupt |=
+ ((pm8001_ha->number_of_intr - 1) << 8);
pm8001_mw32(address, MAIN_FATAL_ERROR_INTERRUPT,
pm8001_ha->main_cfg_tbl.pm80xx_tbl.fatal_err_interrupt);
pm8001_mw32(address, MAIN_EVENT_CRC_CHECK,
@@ -1099,6 +1102,9 @@ static int pm80xx_chip_init(struct pm8001_hba_info *pm8001_ha)
return -EBUSY;
}
+ /* Initialize the controller fatal error flag */
+ pm8001_ha->controller_fatal_error = false;
+
/* Initialize pci space address eg: mpi offset */
init_pci_device_addresses(pm8001_ha);
init_default_table_values(pm8001_ha);
@@ -1207,13 +1213,17 @@ pm80xx_chip_soft_rst(struct pm8001_hba_info *pm8001_ha)
u32 bootloader_state;
u32 ibutton0, ibutton1;
- /* Check if MPI is in ready state to reset */
- if (mpi_uninit_check(pm8001_ha) != 0) {
- PM8001_FAIL_DBG(pm8001_ha,
- pm8001_printk("MPI state is not ready\n"));
- return -1;
+ /* Process MPI table uninitialization only if FW is ready */
+ if (!pm8001_ha->controller_fatal_error) {
+ /* Check if MPI is in ready state to reset */
+ if (mpi_uninit_check(pm8001_ha) != 0) {
+ regval = pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_1);
+ PM8001_FAIL_DBG(pm8001_ha, pm8001_printk(
+ "MPI state is not ready scratch1 :0x%x\n",
+ regval));
+ return -1;
+ }
}
-
/* checked for reset register normal state; 0x0 */
regval = pm8001_cr32(pm8001_ha, 0, SPC_REG_SOFT_RESET);
PM8001_INIT_DBG(pm8001_ha,
@@ -3717,6 +3727,46 @@ static void process_one_iomb(struct pm8001_hba_info *pm8001_ha, void *piomb)
}
}
+static void print_scratchpad_registers(struct pm8001_hba_info *pm8001_ha)
+{
+ PM8001_FAIL_DBG(pm8001_ha,
+ pm8001_printk("MSGU_SCRATCH_PAD_0: 0x%x\n",
+ pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_0)));
+ PM8001_FAIL_DBG(pm8001_ha,
+ pm8001_printk("MSGU_SCRATCH_PAD_1:0x%x\n",
+ pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_1)));
+ PM8001_FAIL_DBG(pm8001_ha,
+ pm8001_printk("MSGU_SCRATCH_PAD_2: 0x%x\n",
+ pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_2)));
+ PM8001_FAIL_DBG(pm8001_ha,
+ pm8001_printk("MSGU_SCRATCH_PAD_3: 0x%x\n",
+ pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_3)));
+ PM8001_FAIL_DBG(pm8001_ha,
+ pm8001_printk("MSGU_HOST_SCRATCH_PAD_0: 0x%x\n",
+ pm8001_cr32(pm8001_ha, 0, MSGU_HOST_SCRATCH_PAD_0)));
+ PM8001_FAIL_DBG(pm8001_ha,
+ pm8001_printk("MSGU_HOST_SCRATCH_PAD_1: 0x%x\n",
+ pm8001_cr32(pm8001_ha, 0, MSGU_HOST_SCRATCH_PAD_1)));
+ PM8001_FAIL_DBG(pm8001_ha,
+ pm8001_printk("MSGU_HOST_SCRATCH_PAD_2: 0x%x\n",
+ pm8001_cr32(pm8001_ha, 0, MSGU_HOST_SCRATCH_PAD_2)));
+ PM8001_FAIL_DBG(pm8001_ha,
+ pm8001_printk("MSGU_HOST_SCRATCH_PAD_3: 0x%x\n",
+ pm8001_cr32(pm8001_ha, 0, MSGU_HOST_SCRATCH_PAD_3)));
+ PM8001_FAIL_DBG(pm8001_ha,
+ pm8001_printk("MSGU_HOST_SCRATCH_PAD_4: 0x%x\n",
+ pm8001_cr32(pm8001_ha, 0, MSGU_HOST_SCRATCH_PAD_4)));
+ PM8001_FAIL_DBG(pm8001_ha,
+ pm8001_printk("MSGU_HOST_SCRATCH_PAD_5: 0x%x\n",
+ pm8001_cr32(pm8001_ha, 0, MSGU_HOST_SCRATCH_PAD_5)));
+ PM8001_FAIL_DBG(pm8001_ha,
+ pm8001_printk("MSGU_RSVD_SCRATCH_PAD_0: 0x%x\n",
+ pm8001_cr32(pm8001_ha, 0, MSGU_HOST_SCRATCH_PAD_6)));
+ PM8001_FAIL_DBG(pm8001_ha,
+ pm8001_printk("MSGU_RSVD_SCRATCH_PAD_1: 0x%x\n",
+ pm8001_cr32(pm8001_ha, 0, MSGU_HOST_SCRATCH_PAD_7)));
+}
+
static int process_oq(struct pm8001_hba_info *pm8001_ha, u8 vec)
{
struct outbound_queue_table *circularQ;
@@ -3724,10 +3774,28 @@ static int process_oq(struct pm8001_hba_info *pm8001_ha, u8 vec)
u8 uninitialized_var(bc);
u32 ret = MPI_IO_STATUS_FAIL;
unsigned long flags;
+ u32 regval;
+ if (vec == (pm8001_ha->number_of_intr - 1)) {
+ regval = pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_1);
+ if ((regval & SCRATCH_PAD_MIPSALL_READY) !=
+ SCRATCH_PAD_MIPSALL_READY) {
+ pm8001_ha->controller_fatal_error = true;
+ PM8001_FAIL_DBG(pm8001_ha, pm8001_printk(
+ "Firmware Fatal error! Regval:0x%x\n", regval));
+ print_scratchpad_registers(pm8001_ha);
+ return ret;
+ }
+ }
spin_lock_irqsave(&pm8001_ha->lock, flags);
circularQ = &pm8001_ha->outbnd_q_tbl[vec];
do {
+ /* spurious interrupt during setup if kexec-ing and
+ * driver doing a doorbell access w/ the pre-kexec oq
+ * interrupt setup.
+ */
+ if (!circularQ->pi_virt)
+ break;
ret = pm8001_mpi_msg_consume(pm8001_ha, circularQ, &pMsg1, &bc);
if (MPI_IO_STATUS_SUCCESS == ret) {
/* process the outbound message */
diff --git a/drivers/scsi/pm8001/pm80xx_hwi.h b/drivers/scsi/pm8001/pm80xx_hwi.h
index 7a443bad61634..411b414a9a0ef 100644
--- a/drivers/scsi/pm8001/pm80xx_hwi.h
+++ b/drivers/scsi/pm8001/pm80xx_hwi.h
@@ -1288,6 +1288,9 @@ typedef struct SASProtocolTimerConfig SASProtocolTimerConfig_t;
#define SCRATCH_PAD_BOOT_LOAD_SUCCESS 0x0
#define SCRATCH_PAD_IOP0_READY 0xC00
#define SCRATCH_PAD_IOP1_READY 0x3000
+#define SCRATCH_PAD_MIPSALL_READY (SCRATCH_PAD_IOP1_READY | \
+ SCRATCH_PAD_IOP0_READY | \
+ SCRATCH_PAD_RAAE_READY)
/* boot loader state */
#define SCRATCH_PAD1_BOOTSTATE_MASK 0x70 /* Bit 4-6 */
--
2.20.1
From: Matthew Whitehead <[email protected]>
[ Upstream commit 03b099bdcdf7125d4a63dc9ddeefdd454e05123d ]
There are comments in processor-cyrix.h advising you to _not_ make calls
using the deprecated macros in this style:
setCx86_old(CX86_CCR4, getCx86_old(CX86_CCR4) | 0x80);
This is because it expands the macro into a non-functioning calling
sequence. The calling order must be:
outb(CX86_CCR2, 0x22);
inb(0x23);
>From the comments:
* When using the old macros a line like
* setCx86(CX86_CCR2, getCx86(CX86_CCR2) | 0x88);
* gets expanded to:
* do {
* outb((CX86_CCR2), 0x22);
* outb((({
* outb((CX86_CCR2), 0x22);
* inb(0x23);
* }) | 0x88), 0x23);
* } while (0);
The new macros fix this problem, so use them instead.
Signed-off-by: Matthew Whitehead <[email protected]>
Signed-off-by: Borislav Petkov <[email protected]>
Reviewed-by: Andy Lutomirski <[email protected]>
Cc: Greg Kroah-Hartman <[email protected]>
Cc: "H. Peter Anvin" <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jia Zhang <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Philippe Ombredanne <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
arch/x86/kernel/cpu/cyrix.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/x86/kernel/cpu/cyrix.c b/arch/x86/kernel/cpu/cyrix.c
index 311d0fad17e6b..a4f6e0ec4ba0f 100644
--- a/arch/x86/kernel/cpu/cyrix.c
+++ b/arch/x86/kernel/cpu/cyrix.c
@@ -434,7 +434,7 @@ static void cyrix_identify(struct cpuinfo_x86 *c)
/* enable MAPEN */
setCx86(CX86_CCR3, (ccr3 & 0x0f) | 0x10);
/* enable cpuid */
- setCx86_old(CX86_CCR4, getCx86_old(CX86_CCR4) | 0x80);
+ setCx86(CX86_CCR4, getCx86(CX86_CCR4) | 0x80);
/* disable MAPEN */
setCx86(CX86_CCR3, ccr3);
local_irq_restore(flags);
--
2.20.1
From: Dengcheng Zhu <[email protected]>
[ Upstream commit a6da4d6fdf8bd512c98d3ac7f1d16bc4bb282919 ]
We can rely on the system kernel and the dump capture kernel themselves in
memory usage.
Being restrictive with 512MB limit may cause kexec tool failure on some
platforms.
Tested-by: Rachel Mozes <[email protected]>
Reported-by: Rachel Mozes <[email protected]>
Signed-off-by: Dengcheng Zhu <[email protected]>
Signed-off-by: Paul Burton <[email protected]>
Patchwork: https://patchwork.linux-mips.org/patch/20568/
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
arch/mips/include/asm/kexec.h | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/arch/mips/include/asm/kexec.h b/arch/mips/include/asm/kexec.h
index 493a3cc7c39ad..cfdbe66575f4d 100644
--- a/arch/mips/include/asm/kexec.h
+++ b/arch/mips/include/asm/kexec.h
@@ -12,11 +12,11 @@
#include <asm/stacktrace.h>
/* Maximum physical address we can use pages from */
-#define KEXEC_SOURCE_MEMORY_LIMIT (0x20000000)
+#define KEXEC_SOURCE_MEMORY_LIMIT (-1UL)
/* Maximum address we can reach in physical address mode */
-#define KEXEC_DESTINATION_MEMORY_LIMIT (0x20000000)
+#define KEXEC_DESTINATION_MEMORY_LIMIT (-1UL)
/* Maximum address we can use for the control code buffer */
-#define KEXEC_CONTROL_MEMORY_LIMIT (0x20000000)
+#define KEXEC_CONTROL_MEMORY_LIMIT (-1UL)
/* Reserve 3*4096 bytes for board-specific info */
#define KEXEC_CONTROL_PAGE_SIZE (4096 + 3*4096)
--
2.20.1
From: Jia-Ju Bai <[email protected]>
[ Upstream commit 8d11eb847de7d89c2754988c944d51a4f63e219b ]
The driver may sleep in a interrupt handler.
The function call paths (from bottom to top) in Linux-4.16 are:
[FUNC] kzalloc(GFP_KERNEL)
drivers/media/pci/ivtv/ivtv-yuv.c, 938:
kzalloc in ivtv_yuv_init
drivers/media/pci/ivtv/ivtv-yuv.c, 960:
ivtv_yuv_init in ivtv_yuv_next_free
drivers/media/pci/ivtv/ivtv-yuv.c, 1126:
ivtv_yuv_next_free in ivtv_yuv_setup_stream_frame
drivers/media/pci/ivtv/ivtv-irq.c, 827:
ivtv_yuv_setup_stream_frame in ivtv_irq_dec_data_req
drivers/media/pci/ivtv/ivtv-irq.c, 1013:
ivtv_irq_dec_data_req in ivtv_irq_handler
To fix this bug, GFP_KERNEL is replaced with GFP_ATOMIC.
This bug is found by my static analysis tool DSAC.
Signed-off-by: Jia-Ju Bai <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/media/pci/ivtv/ivtv-yuv.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/media/pci/ivtv/ivtv-yuv.c b/drivers/media/pci/ivtv/ivtv-yuv.c
index f7299d3d82449..bcb51e87c72f0 100644
--- a/drivers/media/pci/ivtv/ivtv-yuv.c
+++ b/drivers/media/pci/ivtv/ivtv-yuv.c
@@ -935,7 +935,7 @@ static void ivtv_yuv_init(struct ivtv *itv)
}
/* We need a buffer for blanking when Y plane is offset - non-fatal if we can't get one */
- yi->blanking_ptr = kzalloc(720 * 16, GFP_KERNEL|__GFP_NOWARN);
+ yi->blanking_ptr = kzalloc(720 * 16, GFP_ATOMIC|__GFP_NOWARN);
if (yi->blanking_ptr) {
yi->blanking_dmaptr = pci_map_single(itv->pdev, yi->blanking_ptr, 720*16, PCI_DMA_TODEVICE);
} else {
--
2.20.1
From: Andreas Kemnade <[email protected]>
[ Upstream commit 6c7103aa026094a4ee2c2708ec6977a6dfc5331d ]
When runtime is not enabled, pm_runtime_get_sync() returns -EACCESS,
the counter will be incremented but the resume callback not called,
so enumeration and charging will not start properly.
To avoid that happen, disable irq on suspend and recheck on resume.
Practically this happens when the device is woken up from suspend by
plugging in usb.
Signed-off-by: Andreas Kemnade <[email protected]>
Signed-off-by: Kishon Vijay Abraham I <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/phy/phy-twl4030-usb.c | 29 +++++++++++++++++++++++++++++
1 file changed, 29 insertions(+)
diff --git a/drivers/phy/phy-twl4030-usb.c b/drivers/phy/phy-twl4030-usb.c
index 547ca7b3f0985..ddb530ee2255c 100644
--- a/drivers/phy/phy-twl4030-usb.c
+++ b/drivers/phy/phy-twl4030-usb.c
@@ -144,6 +144,7 @@
#define PMBR1 0x0D
#define GPIO_USB_4PIN_ULPI_2430C (3 << 0)
+static irqreturn_t twl4030_usb_irq(int irq, void *_twl);
/*
* If VBUS is valid or ID is ground, then we know a
* cable is present and we need to be runtime-enabled
@@ -392,6 +393,33 @@ static void __twl4030_phy_power(struct twl4030_usb *twl, int on)
WARN_ON(twl4030_usb_write_verify(twl, PHY_PWR_CTRL, pwr) < 0);
}
+static int __maybe_unused twl4030_usb_suspend(struct device *dev)
+{
+ struct twl4030_usb *twl = dev_get_drvdata(dev);
+
+ /*
+ * we need enabled runtime on resume,
+ * so turn irq off here, so we do not get it early
+ * note: wakeup on usb plug works independently of this
+ */
+ dev_dbg(twl->dev, "%s\n", __func__);
+ disable_irq(twl->irq);
+
+ return 0;
+}
+
+static int __maybe_unused twl4030_usb_resume(struct device *dev)
+{
+ struct twl4030_usb *twl = dev_get_drvdata(dev);
+
+ dev_dbg(twl->dev, "%s\n", __func__);
+ enable_irq(twl->irq);
+ /* check whether cable status changed */
+ twl4030_usb_irq(0, twl);
+
+ return 0;
+}
+
static int __maybe_unused twl4030_usb_runtime_suspend(struct device *dev)
{
struct twl4030_usb *twl = dev_get_drvdata(dev);
@@ -652,6 +680,7 @@ static const struct phy_ops ops = {
static const struct dev_pm_ops twl4030_usb_pm_ops = {
SET_RUNTIME_PM_OPS(twl4030_usb_runtime_suspend,
twl4030_usb_runtime_resume, NULL)
+ SET_SYSTEM_SLEEP_PM_OPS(twl4030_usb_suspend, twl4030_usb_resume)
};
static int twl4030_usb_probe(struct platform_device *pdev)
--
2.20.1
From: Nathan Chancellor <[email protected]>
[ Upstream commit 8cfde7847d5ed0bb77bace41519572963e43cd17 ]
Clang warns when one enumerated type is converted implicitly to another:
drivers/spi/spi-pic32.c:323:8: warning: implicit conversion from
enumeration type 'enum dma_data_direction' to different enumeration type
'enum dma_transfer_direction' [-Wenum-conversion]
DMA_FROM_DEVICE,
^~~~~~~~~~~~~~~
drivers/spi/spi-pic32.c:333:8: warning: implicit conversion from
enumeration type 'enum dma_data_direction' to different enumeration type
'enum dma_transfer_direction' [-Wenum-conversion]
DMA_TO_DEVICE,
^~~~~~~~~~~~~
2 warnings generated.
Use the proper enums from dma_transfer_direction (DMA_FROM_DEVICE =
DMA_DEV_TO_MEM = 2, DMA_TO_DEVICE = DMA_MEM_TO_DEV = 1) to satify Clang.
Link: https://github.com/ClangBuiltLinux/linux/issues/159
Signed-off-by: Nathan Chancellor <[email protected]>
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/spi/spi-pic32.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/spi/spi-pic32.c b/drivers/spi/spi-pic32.c
index fefb688a34328..2f4df804c4d80 100644
--- a/drivers/spi/spi-pic32.c
+++ b/drivers/spi/spi-pic32.c
@@ -320,7 +320,7 @@ static int pic32_spi_dma_transfer(struct pic32_spi *pic32s,
desc_rx = dmaengine_prep_slave_sg(master->dma_rx,
xfer->rx_sg.sgl,
xfer->rx_sg.nents,
- DMA_FROM_DEVICE,
+ DMA_DEV_TO_MEM,
DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
if (!desc_rx) {
ret = -EINVAL;
@@ -330,7 +330,7 @@ static int pic32_spi_dma_transfer(struct pic32_spi *pic32s,
desc_tx = dmaengine_prep_slave_sg(master->dma_tx,
xfer->tx_sg.sgl,
xfer->tx_sg.nents,
- DMA_TO_DEVICE,
+ DMA_MEM_TO_DEV,
DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
if (!desc_tx) {
ret = -EINVAL;
--
2.20.1
From: Marek Szyprowski <[email protected]>
[ Upstream commit 64858773d78e820003a94e5a7179d368213655d6 ]
This patch adds missing properties to the CODEC and sound nodes, so the
audio will work also on Snow rev5 Chromebook. This patch is an extension
to the commit e9eefc3f8ce0 ("ARM: dts: exynos: Add missing clock and
DAI properties to the max98095 node in Snow Chromebook")
and commit 6ab569936d60 ("ARM: dts: exynos: Enable HDMI audio on Snow
Chromebook"). It has been reported that such changes work fine on the
rev5 board too.
Signed-off-by: Marek Szyprowski <[email protected]>
[krzk: Fixed typo in phandle to &max98090]
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm/boot/dts/exynos5250-snow-rev5.dts | 11 +++++++++++
1 file changed, 11 insertions(+)
diff --git a/arch/arm/boot/dts/exynos5250-snow-rev5.dts b/arch/arm/boot/dts/exynos5250-snow-rev5.dts
index 90560c316f644..cb986175b69b4 100644
--- a/arch/arm/boot/dts/exynos5250-snow-rev5.dts
+++ b/arch/arm/boot/dts/exynos5250-snow-rev5.dts
@@ -23,6 +23,14 @@
samsung,model = "Snow-I2S-MAX98090";
samsung,audio-codec = <&max98090>;
+
+ cpu {
+ sound-dai = <&i2s0 0>;
+ };
+
+ codec {
+ sound-dai = <&max98090 0>, <&hdmi>;
+ };
};
};
@@ -34,6 +42,9 @@
interrupt-parent = <&gpx0>;
pinctrl-names = "default";
pinctrl-0 = <&max98090_irq>;
+ clocks = <&pmu_system_controller 0>;
+ clock-names = "mclk";
+ #sound-dai-cells = <1>;
};
};
--
2.20.1
From: Bernd Edlinger <[email protected]>
[ Upstream commit a75e78f21f9ad4b810868c89dbbabcc3931591ca ]
The terminating NUL byte is only there because the buffer is
allocated with kzalloc(PAGE_SIZE, GFP_KERNEL), but since the
range-check is off-by-one, and PAGE_SIZE==PATH_MAX, the
returned string may not be zero-terminated if it is exactly
PATH_MAX characters long. Furthermore also the initial loop
may theoretically exceed PATH_MAX and cause a fault.
Signed-off-by: Bernd Edlinger <[email protected]>
Acked-by: Tejun Heo <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/kernfs/symlink.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/fs/kernfs/symlink.c b/fs/kernfs/symlink.c
index 80317b04c84a2..e431a850f2f2b 100644
--- a/fs/kernfs/symlink.c
+++ b/fs/kernfs/symlink.c
@@ -63,6 +63,9 @@ static int kernfs_get_target_path(struct kernfs_node *parent,
if (base == kn)
break;
+ if ((s - path) + 3 >= PATH_MAX)
+ return -ENAMETOOLONG;
+
strcpy(s, "../");
s += 3;
base = base->parent;
@@ -79,7 +82,7 @@ static int kernfs_get_target_path(struct kernfs_node *parent,
if (len < 2)
return -EINVAL;
len--;
- if ((s - path) + len > PATH_MAX)
+ if ((s - path) + len >= PATH_MAX)
return -ENAMETOOLONG;
/* reverse fillup of target string from target to base */
--
2.20.1
From: Rob Herring <[email protected]>
[ Upstream commit cf680cc5251487b9a39919c3cda31a108af19cf8 ]
dtc has new checks for I2C and SPI buses. Fix the warnings in node names
and unit-addresses.
arch/arm/boot/dts/dove-cubox.dtb: Warning (i2c_bus_reg): /i2c-mux/i2c@0/clock-generator: I2C bus unit address format error, expected "60"
arch/arm/boot/dts/dove-cubox-es.dtb: Warning (i2c_bus_reg): /i2c-mux/i2c@0/clock-generator: I2C bus unit address format error, expected "60"
arch/arm/boot/dts/dove-cubox.dtb: Warning (spi_bus_bridge): /mbus/internal-regs/spi-ctrl@10600: node name for SPI buses should be 'spi'
arch/arm/boot/dts/dove-cubox-es.dtb: Warning (spi_bus_bridge): /mbus/internal-regs/spi-ctrl@10600: node name for SPI buses should be 'spi'
arch/arm/boot/dts/dove-dove-db.dtb: Warning (spi_bus_bridge): /mbus/internal-regs/spi-ctrl@10600: node name for SPI buses should be 'spi'
arch/arm/boot/dts/dove-sbc-a510.dtb: Warning (spi_bus_bridge): /mbus/internal-regs/spi-ctrl@10600: node name for SPI buses should be 'spi'
arch/arm/boot/dts/dove-sbc-a510.dtb: Warning (spi_bus_bridge): /mbus/internal-regs/spi-ctrl@14600: node name for SPI buses should be 'spi'
arch/arm/boot/dts/orion5x-kuroboxpro.dtb: Warning (i2c_bus_reg): /soc/internal-regs/i2c@11000/rtc: I2C bus unit address format error, expected "32"
arch/arm/boot/dts/orion5x-linkstation-lschl.dtb: Warning (i2c_bus_reg): /soc/internal-regs/i2c@11000/rtc: I2C bus unit address format error, expected "32"
arch/arm/boot/dts/orion5x-linkstation-lsgl.dtb: Warning (i2c_bus_reg): /soc/internal-regs/i2c@11000/rtc: I2C bus unit address format error, expected "32"
arch/arm/boot/dts/orion5x-linkstation-lswtgl.dtb: Warning (i2c_bus_reg): /soc/internal-regs/i2c@11000/rtc: I2C bus unit address format error, expected "32"
Cc: Jason Cooper <[email protected]>
Cc: Andrew Lunn <[email protected]>
Cc: Sebastian Hesselbarth <[email protected]>
Cc: Gregory Clement <[email protected]>
Signed-off-by: Rob Herring <[email protected]>
Signed-off-by: Gregory CLEMENT <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm/boot/dts/dove-cubox.dts | 2 +-
arch/arm/boot/dts/dove.dtsi | 6 +++---
arch/arm/boot/dts/orion5x-linkstation.dtsi | 2 +-
3 files changed, 5 insertions(+), 5 deletions(-)
diff --git a/arch/arm/boot/dts/dove-cubox.dts b/arch/arm/boot/dts/dove-cubox.dts
index af3cb633135fc..ee32315e3d3af 100644
--- a/arch/arm/boot/dts/dove-cubox.dts
+++ b/arch/arm/boot/dts/dove-cubox.dts
@@ -86,7 +86,7 @@
status = "okay";
clock-frequency = <100000>;
- si5351: clock-generator {
+ si5351: clock-generator@60 {
compatible = "silabs,si5351a-msop";
reg = <0x60>;
#address-cells = <1>;
diff --git a/arch/arm/boot/dts/dove.dtsi b/arch/arm/boot/dts/dove.dtsi
index 698d58cea20d2..11342aeccb73a 100644
--- a/arch/arm/boot/dts/dove.dtsi
+++ b/arch/arm/boot/dts/dove.dtsi
@@ -152,7 +152,7 @@
0xffffe000 MBUS_ID(0x03, 0x01) 0 0x0000800 /* CESA SRAM 2k */
0xfffff000 MBUS_ID(0x0d, 0x00) 0 0x0000800>; /* PMU SRAM 2k */
- spi0: spi-ctrl@10600 {
+ spi0: spi@10600 {
compatible = "marvell,orion-spi";
#address-cells = <1>;
#size-cells = <0>;
@@ -165,7 +165,7 @@
status = "disabled";
};
- i2c: i2c-ctrl@11000 {
+ i2c: i2c@11000 {
compatible = "marvell,mv64xxx-i2c";
reg = <0x11000 0x20>;
#address-cells = <1>;
@@ -215,7 +215,7 @@
status = "disabled";
};
- spi1: spi-ctrl@14600 {
+ spi1: spi@14600 {
compatible = "marvell,orion-spi";
#address-cells = <1>;
#size-cells = <0>;
diff --git a/arch/arm/boot/dts/orion5x-linkstation.dtsi b/arch/arm/boot/dts/orion5x-linkstation.dtsi
index ed456ab35fd84..c1bc8376d4eb0 100644
--- a/arch/arm/boot/dts/orion5x-linkstation.dtsi
+++ b/arch/arm/boot/dts/orion5x-linkstation.dtsi
@@ -156,7 +156,7 @@
&i2c {
status = "okay";
- rtc {
+ rtc@32 {
compatible = "ricoh,rs5c372a";
reg = <0x32>;
};
--
2.20.1
From: Rob Herring <[email protected]>
[ Upstream commit 016add12977bcc30f77d7e48fc9a3a024cb46645 ]
SPI controller nodes should be named 'spi' rather than 'ssp'. Fixing the
name enables dtc SPI bus checks.
Cc: Linus Walleij <[email protected]>
Signed-off-by: Rob Herring <[email protected]>
Signed-off-by: Linus Walleij <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm/boot/dts/arm-realview-eb.dtsi | 2 +-
arch/arm/boot/dts/arm-realview-pb1176.dts | 2 +-
arch/arm/boot/dts/arm-realview-pb11mp.dts | 2 +-
arch/arm/boot/dts/arm-realview-pbx.dtsi | 2 +-
arch/arm/boot/dts/versatile-ab.dts | 2 +-
5 files changed, 5 insertions(+), 5 deletions(-)
diff --git a/arch/arm/boot/dts/arm-realview-eb.dtsi b/arch/arm/boot/dts/arm-realview-eb.dtsi
index e2e9599596e25..05379b6c1c13b 100644
--- a/arch/arm/boot/dts/arm-realview-eb.dtsi
+++ b/arch/arm/boot/dts/arm-realview-eb.dtsi
@@ -334,7 +334,7 @@
clock-names = "uartclk", "apb_pclk";
};
- ssp: ssp@1000d000 {
+ ssp: spi@1000d000 {
compatible = "arm,pl022", "arm,primecell";
reg = <0x1000d000 0x1000>;
clocks = <&sspclk>, <&pclk>;
diff --git a/arch/arm/boot/dts/arm-realview-pb1176.dts b/arch/arm/boot/dts/arm-realview-pb1176.dts
index c789564f28033..c1fd5615ddfe3 100644
--- a/arch/arm/boot/dts/arm-realview-pb1176.dts
+++ b/arch/arm/boot/dts/arm-realview-pb1176.dts
@@ -343,7 +343,7 @@
clock-names = "apb_pclk";
};
- pb1176_ssp: ssp@1010b000 {
+ pb1176_ssp: spi@1010b000 {
compatible = "arm,pl022", "arm,primecell";
reg = <0x1010b000 0x1000>;
interrupt-parent = <&intc_dc1176>;
diff --git a/arch/arm/boot/dts/arm-realview-pb11mp.dts b/arch/arm/boot/dts/arm-realview-pb11mp.dts
index 3944765ac4b06..e306f1cceb4ec 100644
--- a/arch/arm/boot/dts/arm-realview-pb11mp.dts
+++ b/arch/arm/boot/dts/arm-realview-pb11mp.dts
@@ -480,7 +480,7 @@
clock-names = "uartclk", "apb_pclk";
};
- ssp@1000d000 {
+ spi@1000d000 {
compatible = "arm,pl022", "arm,primecell";
reg = <0x1000d000 0x1000>;
interrupt-parent = <&intc_pb11mp>;
diff --git a/arch/arm/boot/dts/arm-realview-pbx.dtsi b/arch/arm/boot/dts/arm-realview-pbx.dtsi
index aeb49c4bd773f..2bf3958b2e6b9 100644
--- a/arch/arm/boot/dts/arm-realview-pbx.dtsi
+++ b/arch/arm/boot/dts/arm-realview-pbx.dtsi
@@ -318,7 +318,7 @@
clock-names = "uartclk", "apb_pclk";
};
- ssp: ssp@1000d000 {
+ ssp: spi@1000d000 {
compatible = "arm,pl022", "arm,primecell";
reg = <0x1000d000 0x1000>;
clocks = <&sspclk>, <&pclk>;
diff --git a/arch/arm/boot/dts/versatile-ab.dts b/arch/arm/boot/dts/versatile-ab.dts
index 409e069b3a845..00d7d28e86f0b 100644
--- a/arch/arm/boot/dts/versatile-ab.dts
+++ b/arch/arm/boot/dts/versatile-ab.dts
@@ -303,7 +303,7 @@
clock-names = "apb_pclk";
};
- ssp@101f4000 {
+ spi@101f4000 {
compatible = "arm,pl022", "arm,primecell";
reg = <0x101f4000 0x1000>;
interrupts = <11>;
--
2.20.1
From: Luiz Augusto von Dentz <[email protected]>
[ Upstream commit a5c3021bb62b970713550db3f7fd08aa70665d7e ]
If the remote is not able to fully utilize the MPS choosen recalculate
the credits based on the actual amount it is sending that way it can
still send packets of MTU size without credits dropping to 0.
Signed-off-by: Luiz Augusto von Dentz <[email protected]>
Signed-off-by: Marcel Holtmann <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/bluetooth/l2cap_core.c | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/net/bluetooth/l2cap_core.c b/net/bluetooth/l2cap_core.c
index 48d23abfe7992..1306962a792af 100644
--- a/net/bluetooth/l2cap_core.c
+++ b/net/bluetooth/l2cap_core.c
@@ -6811,6 +6811,16 @@ static int l2cap_le_data_rcv(struct l2cap_chan *chan, struct sk_buff *skb)
chan->sdu_len = sdu_len;
chan->sdu_last_frag = skb;
+ /* Detect if remote is not able to use the selected MPS */
+ if (skb->len + L2CAP_SDULEN_SIZE < chan->mps) {
+ u16 mps_len = skb->len + L2CAP_SDULEN_SIZE;
+
+ /* Adjust the number of credits */
+ BT_DBG("chan->mps %u -> %u", chan->mps, mps_len);
+ chan->mps = mps_len;
+ l2cap_chan_le_send_credits(chan);
+ }
+
return 0;
}
--
2.20.1
From: Nicholas Piggin <[email protected]>
[ Upstream commit 09b4438db13fa83b6219aee5993711a2aa2a0c64 ]
This causes SLB alloation to start 1 beyond the start of the SLB.
There is no real problem because after it wraps it stats behaving
properly, it's just surprisig to see when looking at SLB traces.
Signed-off-by: Nicholas Piggin <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/powerpc/mm/slb.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/powerpc/mm/slb.c b/arch/powerpc/mm/slb.c
index 64c9a91773af4..96c41b55b106b 100644
--- a/arch/powerpc/mm/slb.c
+++ b/arch/powerpc/mm/slb.c
@@ -321,7 +321,7 @@ void slb_initialize(void)
#endif
}
- get_paca()->stab_rr = SLB_NUM_BOLTED;
+ get_paca()->stab_rr = SLB_NUM_BOLTED - 1;
lflags = SLB_VSID_KERNEL | linear_llp;
vflags = SLB_VSID_KERNEL | vmalloc_llp;
--
2.20.1
From: Hannes Reinecke <[email protected]>
[ Upstream commit 1aeeeed7f03c576f096eede7b0384f99a98f588c ]
When doing a host reset we should be clearing all outstanding commands, not
just the command triggering the reset.
[mkp: adjusted Hannes' SoB address]
Signed-off-by: Hannes Reinecke <[email protected]>
Reviewed-by: Johannes Thumshirn <[email protected]>
Cc: Ondrey Zary <[email protected]>
Signed-off-by: Finn Thain <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/scsi/NCR5380.c | 7 +++++--
1 file changed, 5 insertions(+), 2 deletions(-)
diff --git a/drivers/scsi/NCR5380.c b/drivers/scsi/NCR5380.c
index 3cfab8868c989..ba7b3aef3ef0b 100644
--- a/drivers/scsi/NCR5380.c
+++ b/drivers/scsi/NCR5380.c
@@ -2392,7 +2392,7 @@ static int NCR5380_bus_reset(struct scsi_cmnd *cmd)
spin_lock_irqsave(&hostdata->lock, flags);
#if (NDEBUG & NDEBUG_ANY)
- scmd_printk(KERN_INFO, cmd, __func__);
+ shost_printk(KERN_INFO, instance, __func__);
#endif
NCR5380_dprint(NDEBUG_ANY, instance);
NCR5380_dprint_phase(NDEBUG_ANY, instance);
@@ -2410,10 +2410,13 @@ static int NCR5380_bus_reset(struct scsi_cmnd *cmd)
* commands!
*/
- if (list_del_cmd(&hostdata->unissued, cmd)) {
+ list_for_each_entry(ncmd, &hostdata->unissued, list) {
+ struct scsi_cmnd *cmd = NCR5380_to_scmd(ncmd);
+
cmd->result = DID_RESET << 16;
cmd->scsi_done(cmd);
}
+ INIT_LIST_HEAD(&hostdata->unissued);
if (hostdata->selecting) {
hostdata->selecting->result = DID_RESET << 16;
--
2.20.1
From: Nathan Fontenot <[email protected]>
[ Upstream commit 85a88cabad57d26d826dd94ea34d3a785824d802 ]
When performing partition migrations all present CPUs must be online
as all present CPUs must make the H_JOIN call as part of the migration
process. Once all present CPUs make the H_JOIN call, one CPU is returned
to make the rtas call to perform the migration to the destination system.
During testing of migration and changing the SMT state we have found
instances where CPUs are offlined, as part of the SMT state change,
before they make the H_JOIN call. This results in a hung system where
every CPU is either in H_JOIN or offline.
To prevent this this patch disables CPU hotplug during the migration
process.
Signed-off-by: Nathan Fontenot <[email protected]>
Reviewed-by: Tyrel Datwyler <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/powerpc/kernel/rtas.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/arch/powerpc/kernel/rtas.c b/arch/powerpc/kernel/rtas.c
index a309a7a29cc60..641f3e4c33808 100644
--- a/arch/powerpc/kernel/rtas.c
+++ b/arch/powerpc/kernel/rtas.c
@@ -984,6 +984,7 @@ int rtas_ibm_suspend_me(u64 handle)
goto out;
}
+ cpu_hotplug_disable();
stop_topology_update();
/* Call function on all CPUs. One of us will make the
@@ -998,6 +999,7 @@ int rtas_ibm_suspend_me(u64 handle)
printk(KERN_ERR "Error doing global join\n");
start_topology_update();
+ cpu_hotplug_enable();
/* Take down CPUs not online prior to suspend */
cpuret = rtas_offline_cpus_mask(offline_mask);
--
2.20.1
From: Finn Thain <[email protected]>
[ Upstream commit 070356513963be6196142acff56acc8359069fa1 ]
When sense data is valid, call set_driver_byte(cmd, DRIVER_SENSE). Otherwise
some callers of scsi_execute() will ignore sense data. Don't set DID_ERROR or
DID_RESET just because sense data is missing.
Tested-by: Michael Schmitz <[email protected]>
Signed-off-by: Finn Thain <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/scsi/NCR5380.c | 9 ++++-----
1 file changed, 4 insertions(+), 5 deletions(-)
diff --git a/drivers/scsi/NCR5380.c b/drivers/scsi/NCR5380.c
index ba7b3aef3ef0b..35419ba32c467 100644
--- a/drivers/scsi/NCR5380.c
+++ b/drivers/scsi/NCR5380.c
@@ -617,11 +617,12 @@ static void complete_cmd(struct Scsi_Host *instance,
if (hostdata->sensing == cmd) {
/* Autosense processing ends here */
- if ((cmd->result & 0xff) != SAM_STAT_GOOD) {
+ if (status_byte(cmd->result) != GOOD) {
scsi_eh_restore_cmnd(cmd, &hostdata->ses);
- set_host_byte(cmd, DID_ERROR);
- } else
+ } else {
scsi_eh_restore_cmnd(cmd, &hostdata->ses);
+ set_driver_byte(cmd, DRIVER_SENSE);
+ }
hostdata->sensing = NULL;
}
@@ -2356,7 +2357,6 @@ static int NCR5380_abort(struct scsi_cmnd *cmd)
if (list_del_cmd(&hostdata->autosense, cmd)) {
dsprintk(NDEBUG_ABORT, instance,
"abort: removed %p from sense queue\n", cmd);
- set_host_byte(cmd, DID_ERROR);
complete_cmd(instance, cmd);
}
@@ -2435,7 +2435,6 @@ static int NCR5380_bus_reset(struct scsi_cmnd *cmd)
list_for_each_entry(ncmd, &hostdata->autosense, list) {
struct scsi_cmnd *cmd = NCR5380_to_scmd(ncmd);
- set_host_byte(cmd, DID_RESET);
cmd->scsi_done(cmd);
}
INIT_LIST_HEAD(&hostdata->autosense);
--
2.20.1
From: YueHaibing <[email protected]>
[ Upstream commit bacade822524e02f662d88f784d2ae821a5546fb ]
The method ndo_start_xmit() is defined as returning an 'netdev_tx_t',
which is a typedef for an enum type, so make sure the implementation in
this driver has returns 'netdev_tx_t' value, and change the function
return type to netdev_tx_t.
Found by coccinelle.
Signed-off-by: YueHaibing <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/toshiba/ps3_gelic_net.c | 4 ++--
drivers/net/ethernet/toshiba/ps3_gelic_net.h | 2 +-
drivers/net/ethernet/toshiba/spider_net.c | 4 ++--
drivers/net/ethernet/toshiba/tc35815.c | 6 ++++--
4 files changed, 9 insertions(+), 7 deletions(-)
diff --git a/drivers/net/ethernet/toshiba/ps3_gelic_net.c b/drivers/net/ethernet/toshiba/ps3_gelic_net.c
index 272f2b1cb7add..34f8437955310 100644
--- a/drivers/net/ethernet/toshiba/ps3_gelic_net.c
+++ b/drivers/net/ethernet/toshiba/ps3_gelic_net.c
@@ -845,9 +845,9 @@ static int gelic_card_kick_txdma(struct gelic_card *card,
* @skb: packet to send out
* @netdev: interface device structure
*
- * returns 0 on success, <0 on failure
+ * returns NETDEV_TX_OK on success, NETDEV_TX_BUSY on failure
*/
-int gelic_net_xmit(struct sk_buff *skb, struct net_device *netdev)
+netdev_tx_t gelic_net_xmit(struct sk_buff *skb, struct net_device *netdev)
{
struct gelic_card *card = netdev_card(netdev);
struct gelic_descr *descr;
diff --git a/drivers/net/ethernet/toshiba/ps3_gelic_net.h b/drivers/net/ethernet/toshiba/ps3_gelic_net.h
index 8505196be9f52..d123644bd720b 100644
--- a/drivers/net/ethernet/toshiba/ps3_gelic_net.h
+++ b/drivers/net/ethernet/toshiba/ps3_gelic_net.h
@@ -370,7 +370,7 @@ void gelic_card_up(struct gelic_card *card);
void gelic_card_down(struct gelic_card *card);
int gelic_net_open(struct net_device *netdev);
int gelic_net_stop(struct net_device *netdev);
-int gelic_net_xmit(struct sk_buff *skb, struct net_device *netdev);
+netdev_tx_t gelic_net_xmit(struct sk_buff *skb, struct net_device *netdev);
void gelic_net_set_multi(struct net_device *netdev);
void gelic_net_tx_timeout(struct net_device *netdev);
int gelic_net_change_mtu(struct net_device *netdev, int new_mtu);
diff --git a/drivers/net/ethernet/toshiba/spider_net.c b/drivers/net/ethernet/toshiba/spider_net.c
index 36a6e8b54d941..1085987946212 100644
--- a/drivers/net/ethernet/toshiba/spider_net.c
+++ b/drivers/net/ethernet/toshiba/spider_net.c
@@ -880,9 +880,9 @@ out:
* @skb: packet to send out
* @netdev: interface device structure
*
- * returns 0 on success, !0 on failure
+ * returns NETDEV_TX_OK on success, NETDEV_TX_BUSY on failure
*/
-static int
+static netdev_tx_t
spider_net_xmit(struct sk_buff *skb, struct net_device *netdev)
{
int cnt;
diff --git a/drivers/net/ethernet/toshiba/tc35815.c b/drivers/net/ethernet/toshiba/tc35815.c
index 47ebac456ae57..9b84ee736fdc1 100644
--- a/drivers/net/ethernet/toshiba/tc35815.c
+++ b/drivers/net/ethernet/toshiba/tc35815.c
@@ -474,7 +474,8 @@ static void free_rxbuf_skb(struct pci_dev *hwdev, struct sk_buff *skb, dma_addr_
/* Index to functions, as function prototypes. */
static int tc35815_open(struct net_device *dev);
-static int tc35815_send_packet(struct sk_buff *skb, struct net_device *dev);
+static netdev_tx_t tc35815_send_packet(struct sk_buff *skb,
+ struct net_device *dev);
static irqreturn_t tc35815_interrupt(int irq, void *dev_id);
static int tc35815_rx(struct net_device *dev, int limit);
static int tc35815_poll(struct napi_struct *napi, int budget);
@@ -1249,7 +1250,8 @@ tc35815_open(struct net_device *dev)
* invariant will hold if you make sure that the netif_*_queue()
* calls are done at the proper times.
*/
-static int tc35815_send_packet(struct sk_buff *skb, struct net_device *dev)
+static netdev_tx_t
+tc35815_send_packet(struct sk_buff *skb, struct net_device *dev)
{
struct tc35815_local *lp = netdev_priv(dev);
struct TxFD *txfd;
--
2.20.1
From: Rob Herring <[email protected]>
[ Upstream commit 11236ef582b8d66290bb3b3710e03ca1d85d8ad8 ]
SPI controller nodes should be named 'spi' rather than 'ssp'. Fixing the
name enables dtc SPI bus checks.
Cc: Vladimir Zapolskiy <[email protected]>
Cc: Sylvain Lemieux <[email protected]>
Signed-off-by: Rob Herring <[email protected]>
Signed-off-by: Arnd Bergmann <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm/boot/dts/lpc32xx.dtsi | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/lpc32xx.dtsi b/arch/arm/boot/dts/lpc32xx.dtsi
index 0d20aadc78bb1..5fa3111731cb0 100644
--- a/arch/arm/boot/dts/lpc32xx.dtsi
+++ b/arch/arm/boot/dts/lpc32xx.dtsi
@@ -179,7 +179,7 @@
* ssp0 and spi1 are shared pins;
* enable one in your board dts, as needed.
*/
- ssp0: ssp@20084000 {
+ ssp0: spi@20084000 {
compatible = "arm,pl022", "arm,primecell";
reg = <0x20084000 0x1000>;
interrupts = <20 IRQ_TYPE_LEVEL_HIGH>;
@@ -199,7 +199,7 @@
* ssp1 and spi2 are shared pins;
* enable one in your board dts, as needed.
*/
- ssp1: ssp@2008c000 {
+ ssp1: spi@2008c000 {
compatible = "arm,pl022", "arm,primecell";
reg = <0x2008c000 0x1000>;
interrupts = <21 IRQ_TYPE_LEVEL_HIGH>;
--
2.20.1
From: Nicolas Adell <[email protected]>
[ Upstream commit 1dedbdf2bbb1ede8d96f35f9845ecae179dc1988 ]
When initializing the USB subsystem before starting the kernel,
OTG overcurrent detection is disabled. In case the OTG polarity of
overcurrent is low active, the overcurrent detection is never enabled
again and events cannot be reported as expected. Because imx usb
overcurrent polarity is low active by default, only detection needs
to be enable in usbmisc init function.
Signed-off-by: Nicolas Adell <[email protected]>
Signed-off-by: Peter Chen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/usb/chipidea/usbmisc_imx.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/usb/chipidea/usbmisc_imx.c b/drivers/usb/chipidea/usbmisc_imx.c
index 20d02a5e418d9..c6577f489d0f6 100644
--- a/drivers/usb/chipidea/usbmisc_imx.c
+++ b/drivers/usb/chipidea/usbmisc_imx.c
@@ -273,6 +273,8 @@ static int usbmisc_imx6q_init(struct imx_usbmisc_data *data)
} else if (data->oc_polarity == 1) {
/* High active */
reg &= ~(MX6_BM_OVER_CUR_DIS | MX6_BM_OVER_CUR_POLARITY);
+ } else {
+ reg &= ~(MX6_BM_OVER_CUR_DIS);
}
writel(reg, usbmisc->base + data->index * 4);
--
2.20.1
From: YueHaibing <[email protected]>
[ Upstream commit 0c13b8d1aee87c35a2fbc1d85a1f766227cf54b5 ]
The method ndo_start_xmit() is defined as returning an 'netdev_tx_t',
which is a typedef for an enum type, so make sure the implementation in
this driver has returns 'netdev_tx_t' value, and change the function
return type to netdev_tx_t.
Found by coccinelle.
Signed-off-by: YueHaibing <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/broadcom/bcm63xx_enet.c | 5 +++--
drivers/net/ethernet/broadcom/sb1250-mac.c | 4 ++--
2 files changed, 5 insertions(+), 4 deletions(-)
diff --git a/drivers/net/ethernet/broadcom/bcm63xx_enet.c b/drivers/net/ethernet/broadcom/bcm63xx_enet.c
index c4078401b7ded..900f2f706cbc7 100644
--- a/drivers/net/ethernet/broadcom/bcm63xx_enet.c
+++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.c
@@ -571,12 +571,13 @@ static irqreturn_t bcm_enet_isr_dma(int irq, void *dev_id)
/*
* tx request callback
*/
-static int bcm_enet_start_xmit(struct sk_buff *skb, struct net_device *dev)
+static netdev_tx_t
+bcm_enet_start_xmit(struct sk_buff *skb, struct net_device *dev)
{
struct bcm_enet_priv *priv;
struct bcm_enet_desc *desc;
u32 len_stat;
- int ret;
+ netdev_tx_t ret;
priv = netdev_priv(dev);
diff --git a/drivers/net/ethernet/broadcom/sb1250-mac.c b/drivers/net/ethernet/broadcom/sb1250-mac.c
index f1b81187a2010..dc7953894c351 100644
--- a/drivers/net/ethernet/broadcom/sb1250-mac.c
+++ b/drivers/net/ethernet/broadcom/sb1250-mac.c
@@ -299,7 +299,7 @@ static enum sbmac_state sbmac_set_channel_state(struct sbmac_softc *,
static void sbmac_promiscuous_mode(struct sbmac_softc *sc, int onoff);
static uint64_t sbmac_addr2reg(unsigned char *ptr);
static irqreturn_t sbmac_intr(int irq, void *dev_instance);
-static int sbmac_start_tx(struct sk_buff *skb, struct net_device *dev);
+static netdev_tx_t sbmac_start_tx(struct sk_buff *skb, struct net_device *dev);
static void sbmac_setmulti(struct sbmac_softc *sc);
static int sbmac_init(struct platform_device *pldev, long long base);
static int sbmac_set_speed(struct sbmac_softc *s, enum sbmac_speed speed);
@@ -2032,7 +2032,7 @@ static irqreturn_t sbmac_intr(int irq,void *dev_instance)
* Return value:
* nothing
********************************************************************* */
-static int sbmac_start_tx(struct sk_buff *skb, struct net_device *dev)
+static netdev_tx_t sbmac_start_tx(struct sk_buff *skb, struct net_device *dev)
{
struct sbmac_softc *sc = netdev_priv(dev);
unsigned long flags;
--
2.20.1
From: Laurent Pinchart <[email protected]>
[ Upstream commit 9d1ff5dcb3cd3390b1e56f1c24ae42c72257c4a3 ]
USB requests for video data are queued from two different locations in
the driver, with the same code block occurring twice. Factor it out to a
function.
Signed-off-by: Laurent Pinchart <[email protected]>
Reviewed-by: Paul Elder <[email protected]>
Tested-by: Paul Elder <[email protected]>
Reviewed-by: Kieran Bingham <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/usb/gadget/function/uvc_video.c | 30 ++++++++++++++++---------
1 file changed, 20 insertions(+), 10 deletions(-)
diff --git a/drivers/usb/gadget/function/uvc_video.c b/drivers/usb/gadget/function/uvc_video.c
index 0f01c04d7cbd8..540917f54506a 100644
--- a/drivers/usb/gadget/function/uvc_video.c
+++ b/drivers/usb/gadget/function/uvc_video.c
@@ -129,6 +129,19 @@ uvc_video_encode_isoc(struct usb_request *req, struct uvc_video *video,
* Request handling
*/
+static int uvcg_video_ep_queue(struct uvc_video *video, struct usb_request *req)
+{
+ int ret;
+
+ ret = usb_ep_queue(video->ep, req, GFP_ATOMIC);
+ if (ret < 0) {
+ printk(KERN_INFO "Failed to queue request (%d).\n", ret);
+ usb_ep_set_halt(video->ep);
+ }
+
+ return ret;
+}
+
/*
* I somehow feel that synchronisation won't be easy to achieve here. We have
* three events that control USB requests submission:
@@ -193,14 +206,13 @@ uvc_video_complete(struct usb_ep *ep, struct usb_request *req)
video->encode(req, video, buf);
- if ((ret = usb_ep_queue(ep, req, GFP_ATOMIC)) < 0) {
- printk(KERN_INFO "Failed to queue request (%d).\n", ret);
- usb_ep_set_halt(ep);
- spin_unlock_irqrestore(&video->queue.irqlock, flags);
+ ret = uvcg_video_ep_queue(video, req);
+ spin_unlock_irqrestore(&video->queue.irqlock, flags);
+
+ if (ret < 0) {
uvcg_queue_cancel(queue, 0);
goto requeue;
}
- spin_unlock_irqrestore(&video->queue.irqlock, flags);
return;
@@ -320,15 +332,13 @@ int uvcg_video_pump(struct uvc_video *video)
video->encode(req, video, buf);
/* Queue the USB request */
- ret = usb_ep_queue(video->ep, req, GFP_ATOMIC);
+ ret = uvcg_video_ep_queue(video, req);
+ spin_unlock_irqrestore(&queue->irqlock, flags);
+
if (ret < 0) {
- printk(KERN_INFO "Failed to queue request (%d)\n", ret);
- usb_ep_set_halt(video->ep);
- spin_unlock_irqrestore(&queue->irqlock, flags);
uvcg_queue_cancel(queue, 0);
break;
}
- spin_unlock_irqrestore(&queue->irqlock, flags);
}
spin_lock_irqsave(&video->req_lock, flags);
--
2.20.1
From: Grygorii Strashko <[email protected]>
[ Upstream commit dcbf6b18d81bcdc51390ca1b258c17e2e13b7d0c ]
am335x-evm has only one CPSW external port physically wired, but DT defines
2 ext. ports. As result, PHY connection failure reported for the second
ext. port.
Update DT to reflect am335x-evm board HW configuration, and, while here,
switch to use phy-handle instead of phy_id.
Signed-off-by: Grygorii Strashko <[email protected]>
Signed-off-by: Tony Lindgren <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm/boot/dts/am335x-evm.dts | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)
diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts
index e82432c79f85f..3f3ad09c7cd5f 100644
--- a/arch/arm/boot/dts/am335x-evm.dts
+++ b/arch/arm/boot/dts/am335x-evm.dts
@@ -701,6 +701,7 @@
pinctrl-0 = <&cpsw_default>;
pinctrl-1 = <&cpsw_sleep>;
status = "okay";
+ slaves = <1>;
};
&davinci_mdio {
@@ -708,15 +709,14 @@
pinctrl-0 = <&davinci_mdio_default>;
pinctrl-1 = <&davinci_mdio_sleep>;
status = "okay";
-};
-&cpsw_emac0 {
- phy_id = <&davinci_mdio>, <0>;
- phy-mode = "rgmii-txid";
+ ethphy0: ethernet-phy@0 {
+ reg = <0>;
+ };
};
-&cpsw_emac1 {
- phy_id = <&davinci_mdio>, <1>;
+&cpsw_emac0 {
+ phy-handle = <ðphy0>;
phy-mode = "rgmii-txid";
};
--
2.20.1
From: Kirill Tkhai <[email protected]>
[ Upstream commit 2a23f2b8adbe4bd584f936f7ac17a99750eed9d7 ]
Since they are of unsigned int type, it's allowed to read them
unlocked during reporting to userspace. Let's underline this fact
with READ_ONCE() macroses.
Signed-off-by: Kirill Tkhai <[email protected]>
Signed-off-by: Miklos Szeredi <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/fuse/control.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/fs/fuse/control.c b/fs/fuse/control.c
index e25c40c10f4fa..97ac2f5843fcc 100644
--- a/fs/fuse/control.c
+++ b/fs/fuse/control.c
@@ -107,7 +107,7 @@ static ssize_t fuse_conn_max_background_read(struct file *file,
if (!fc)
return 0;
- val = fc->max_background;
+ val = READ_ONCE(fc->max_background);
fuse_conn_put(fc);
return fuse_conn_limit_read(file, buf, len, ppos, val);
@@ -144,7 +144,7 @@ static ssize_t fuse_conn_congestion_threshold_read(struct file *file,
if (!fc)
return 0;
- val = fc->congestion_threshold;
+ val = READ_ONCE(fc->congestion_threshold);
fuse_conn_put(fc);
return fuse_conn_limit_read(file, buf, len, ppos, val);
--
2.20.1
From: Rob Herring <[email protected]>
[ Upstream commit 2f967f9e9fa076affb711da1a8389b5d33814fc6 ]
SPI controller nodes should be named 'spi' rather than 'ssp'. Fixing the
name enables dtc SPI bus checks.
Signed-off-by: Rob Herring <[email protected]>
Signed-off-by: Linus Walleij <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm/boot/dts/ste-dbx5x0.dtsi | 4 ++--
arch/arm/boot/dts/ste-hrefprev60.dtsi | 2 +-
arch/arm/boot/dts/ste-snowball.dts | 2 +-
arch/arm/boot/dts/ste-u300.dts | 2 +-
4 files changed, 5 insertions(+), 5 deletions(-)
diff --git a/arch/arm/boot/dts/ste-dbx5x0.dtsi b/arch/arm/boot/dts/ste-dbx5x0.dtsi
index 45869c3234358..5f1769209526a 100644
--- a/arch/arm/boot/dts/ste-dbx5x0.dtsi
+++ b/arch/arm/boot/dts/ste-dbx5x0.dtsi
@@ -864,7 +864,7 @@
power-domains = <&pm_domains DOMAIN_VAPE>;
};
- ssp@80002000 {
+ spi@80002000 {
compatible = "arm,pl022", "arm,primecell";
reg = <0x80002000 0x1000>;
interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
@@ -878,7 +878,7 @@
power-domains = <&pm_domains DOMAIN_VAPE>;
};
- ssp@80003000 {
+ spi@80003000 {
compatible = "arm,pl022", "arm,primecell";
reg = <0x80003000 0x1000>;
interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm/boot/dts/ste-hrefprev60.dtsi b/arch/arm/boot/dts/ste-hrefprev60.dtsi
index ece222d51717c..cf8d03bc42c15 100644
--- a/arch/arm/boot/dts/ste-hrefprev60.dtsi
+++ b/arch/arm/boot/dts/ste-hrefprev60.dtsi
@@ -57,7 +57,7 @@
};
};
- ssp@80002000 {
+ spi@80002000 {
/*
* On the first generation boards, this SSP/SPI port was connected
* to the AB8500.
diff --git a/arch/arm/boot/dts/ste-snowball.dts b/arch/arm/boot/dts/ste-snowball.dts
index 386eee6de2320..272d36c3d223b 100644
--- a/arch/arm/boot/dts/ste-snowball.dts
+++ b/arch/arm/boot/dts/ste-snowball.dts
@@ -386,7 +386,7 @@
pinctrl-1 = <&i2c3_sleep_mode>;
};
- ssp@80002000 {
+ spi@80002000 {
pinctrl-names = "default";
pinctrl-0 = <&ssp0_snowball_mode>;
};
diff --git a/arch/arm/boot/dts/ste-u300.dts b/arch/arm/boot/dts/ste-u300.dts
index 2f5107ffeef04..ea6768b96a9df 100644
--- a/arch/arm/boot/dts/ste-u300.dts
+++ b/arch/arm/boot/dts/ste-u300.dts
@@ -441,7 +441,7 @@
dma-names = "rx";
};
- spi: ssp@c0006000 {
+ spi: spi@c0006000 {
compatible = "arm,pl022", "arm,primecell";
reg = <0xc0006000 0x1000>;
interrupt-parent = <&vica>;
--
2.20.1
From: Christoph Hellwig <[email protected]>
commit 57292b58ddb58689e8c3b4c6eadbef10d9ca44dd upstream.
This can be used to check for fs vs non-fs requests and basically
removes all knowledge of BLOCK_PC specific from the block layer,
as well as preparing for removing the cmd_type field in struct request.
Signed-off-by: Christoph Hellwig <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
[only take the blkdev.h changes as we only want the function for backported
patches - gregkh]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
include/linux/blkdev.h | 9 +++++++--
1 file changed, 7 insertions(+), 2 deletions(-)
--- a/include/linux/blkdev.h
+++ b/include/linux/blkdev.h
@@ -212,6 +212,11 @@ struct request {
(req)->cmd_flags |= flags; \
} while (0)
+static inline bool blk_rq_is_passthrough(struct request *rq)
+{
+ return rq->cmd_type != REQ_TYPE_FS;
+}
+
static inline unsigned short req_get_ioprio(struct request *req)
{
return req->ioprio;
@@ -663,7 +668,7 @@ static inline void blk_clear_rl_full(str
static inline bool rq_mergeable(struct request *rq)
{
- if (rq->cmd_type != REQ_TYPE_FS)
+ if (blk_rq_is_passthrough(rq))
return false;
if (req_op(rq) == REQ_OP_FLUSH)
@@ -910,7 +915,7 @@ static inline unsigned int blk_rq_get_ma
{
struct request_queue *q = rq->q;
- if (unlikely(rq->cmd_type != REQ_TYPE_FS))
+ if (blk_rq_is_passthrough(rq))
return q->limits.max_hw_sectors;
if (!q->limits.chunk_sectors ||
From: Brad Love <[email protected]>
[ Upstream commit f347596f2bf114a3af3d80201c6e6bef538d884f ]
Correcting red herring error messages.
Where appropriate, replaces au0282_dev_register with:
- au0828_analog_register
- au0828_dvb_register
Signed-off-by: Brad Love <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/media/usb/au0828/au0828-core.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/media/usb/au0828/au0828-core.c b/drivers/media/usb/au0828/au0828-core.c
index 38e73ee5c8fb1..78f0bf8ee084c 100644
--- a/drivers/media/usb/au0828/au0828-core.c
+++ b/drivers/media/usb/au0828/au0828-core.c
@@ -639,7 +639,7 @@ static int au0828_usb_probe(struct usb_interface *interface,
/* Analog TV */
retval = au0828_analog_register(dev, interface);
if (retval) {
- pr_err("%s() au0282_dev_register failed to register on V4L2\n",
+ pr_err("%s() au0828_analog_register failed to register on V4L2\n",
__func__);
goto done;
}
@@ -647,7 +647,7 @@ static int au0828_usb_probe(struct usb_interface *interface,
/* Digital TV */
retval = au0828_dvb_register(dev);
if (retval)
- pr_err("%s() au0282_dev_register failed\n",
+ pr_err("%s() au0828_dvb_register failed\n",
__func__);
/* Remote controller */
--
2.20.1
From: Claudiu Beznea <[email protected]>
[ Upstream commit 9f1e44774be578fb92776add95f1fcaf8284d692 ]
There should be only one instance of struct shdwc in the system. This is
referenced through at91_shdwc. Return in probe if at91_shdwc is already
allocated.
Signed-off-by: Claudiu Beznea <[email protected]>
Acked-by: Nicolas Ferre <[email protected]>
Signed-off-by: Sebastian Reichel <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/power/reset/at91-sama5d2_shdwc.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/power/reset/at91-sama5d2_shdwc.c b/drivers/power/reset/at91-sama5d2_shdwc.c
index 90b0b5a70ce52..04ca990e8f6cb 100644
--- a/drivers/power/reset/at91-sama5d2_shdwc.c
+++ b/drivers/power/reset/at91-sama5d2_shdwc.c
@@ -246,6 +246,9 @@ static int __init at91_shdwc_probe(struct platform_device *pdev)
if (!pdev->dev.of_node)
return -ENODEV;
+ if (at91_shdwc)
+ return -EBUSY;
+
at91_shdwc = devm_kzalloc(&pdev->dev, sizeof(*at91_shdwc), GFP_KERNEL);
if (!at91_shdwc)
return -ENOMEM;
--
2.20.1
From: Suzuki K Poulose <[email protected]>
[ Upstream commit d2db7773ba864df6b4e19643dfc54838550d8049 ]
So far we have only supported 3 level page table with fixed IPA of
40bits, where PUD is folded. With 4 level page tables, we need
to check if the PUD entry is valid or not. Fix stage2_flush_memslot()
to do this check, before walking down the table.
Acked-by: Christoffer Dall <[email protected]>
Acked-by: Marc Zyngier <[email protected]>
Reviewed-by: Eric Auger <[email protected]>
Signed-off-by: Suzuki K Poulose <[email protected]>
Signed-off-by: Marc Zyngier <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm/kvm/mmu.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/arch/arm/kvm/mmu.c b/arch/arm/kvm/mmu.c
index b3d268a79f057..bb0d5e21d60bd 100644
--- a/arch/arm/kvm/mmu.c
+++ b/arch/arm/kvm/mmu.c
@@ -366,7 +366,8 @@ static void stage2_flush_memslot(struct kvm *kvm,
pgd = kvm->arch.pgd + stage2_pgd_index(addr);
do {
next = stage2_pgd_addr_end(addr, end);
- stage2_flush_puds(kvm, pgd, addr, next);
+ if (!stage2_pgd_none(*pgd))
+ stage2_flush_puds(kvm, pgd, addr, next);
} while (pgd++, addr = next, addr != end);
}
--
2.20.1
From: Laurent Pinchart <[email protected]>
[ Upstream commit 86f3daed59bceb4fa7981d85e89f63ebbae1d561 ]
Some of the .allow_link() and .drop_link() operations implementations
call config_group_find_item() and then leak the reference to the
returned item. Fix this by dropping those references where needed.
Signed-off-by: Laurent Pinchart <[email protected]>
Reviewed-by: Kieran Bingham <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/usb/gadget/function/uvc_configfs.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/drivers/usb/gadget/function/uvc_configfs.c b/drivers/usb/gadget/function/uvc_configfs.c
index d7dcd39fe12cb..3803dda54666b 100644
--- a/drivers/usb/gadget/function/uvc_configfs.c
+++ b/drivers/usb/gadget/function/uvc_configfs.c
@@ -543,6 +543,7 @@ static int uvcg_control_class_allow_link(struct config_item *src,
unlock:
mutex_unlock(&opts->lock);
out:
+ config_item_put(header);
mutex_unlock(su_mutex);
return ret;
}
@@ -584,6 +585,7 @@ static int uvcg_control_class_drop_link(struct config_item *src,
unlock:
mutex_unlock(&opts->lock);
out:
+ config_item_put(header);
mutex_unlock(su_mutex);
return ret;
}
@@ -2047,6 +2049,7 @@ static int uvcg_streaming_class_allow_link(struct config_item *src,
unlock:
mutex_unlock(&opts->lock);
out:
+ config_item_put(header);
mutex_unlock(su_mutex);
return ret;
}
@@ -2091,6 +2094,7 @@ static int uvcg_streaming_class_drop_link(struct config_item *src,
unlock:
mutex_unlock(&opts->lock);
out:
+ config_item_put(header);
mutex_unlock(su_mutex);
return ret;
}
--
2.20.1
From: Tomasz Figa <[email protected]>
[ Upstream commit cb90a2c6f77fe9b43d1e3f759bb2f13fe7fa1811 ]
Since the max8998 MFD driver supports instantiation by DT, platform data
retrieval is handled in MFD probe and cell drivers should get use
the pdata field of max8998_dev struct to obtain them.
Fixes: ee999fb3f17f ("mfd: max8998: Add support for Device Tree")
Signed-off-by: Tomasz Figa <[email protected]>
Signed-off-by: Paweł Chmiel <[email protected]>
Signed-off-by: Sebastian Reichel <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/power/supply/max8998_charger.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/power/supply/max8998_charger.c b/drivers/power/supply/max8998_charger.c
index b64cf0f141425..66438029bdd0c 100644
--- a/drivers/power/supply/max8998_charger.c
+++ b/drivers/power/supply/max8998_charger.c
@@ -85,7 +85,7 @@ static const struct power_supply_desc max8998_battery_desc = {
static int max8998_battery_probe(struct platform_device *pdev)
{
struct max8998_dev *iodev = dev_get_drvdata(pdev->dev.parent);
- struct max8998_platform_data *pdata = dev_get_platdata(iodev->dev);
+ struct max8998_platform_data *pdata = iodev->pdata;
struct power_supply_config psy_cfg = {};
struct max8998_battery_data *max8998;
struct i2c_client *i2c;
--
2.20.1
From: Simon Wunderlich <[email protected]>
[ Upstream commit 4fb5837ac2bd46a85620b297002c704e9958f64d ]
Since the debug print code is outside of the loop, it shouldn't use the loop
iterator anymore but instead print the found maximum index.
Cc: Nick Kossifidis <[email protected]>
Signed-off-by: Simon Wunderlich <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/ath/ath9k/common-spectral.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/wireless/ath/ath9k/common-spectral.c b/drivers/net/wireless/ath/ath9k/common-spectral.c
index eedf86b67cf51..807fbe31e9303 100644
--- a/drivers/net/wireless/ath/ath9k/common-spectral.c
+++ b/drivers/net/wireless/ath/ath9k/common-spectral.c
@@ -411,7 +411,7 @@ ath_cmn_process_ht20_40_fft(struct ath_rx_status *rs,
ath_dbg(common, SPECTRAL_SCAN,
"Calculated new upper max 0x%X at %i\n",
- tmp_mag, i);
+ tmp_mag, fft_sample_40.upper_max_index);
} else
for (i = dc_pos; i < SPECTRAL_HT20_40_NUM_BINS; i++) {
if (fft_sample_40.data[i] == (upper_mag >> max_exp))
--
2.20.1
From: Haishuang Yan <[email protected]>
[ Upstream commit b0350d51f001e6edc13ee4f253b98b50b05dd401 ]
gre_parse_header stops parsing when csum_err is encountered, which means
tpi->key is undefined and ip_tunnel_lookup will return NULL improperly.
This patch introduce a NULL pointer as csum_err parameter. Even when
csum_err is encountered, it won't return error and continue parsing gre
header as expected.
Fixes: 9f57c67c379d ("gre: Remove support for sharing GRE protocol hook.")
Reported-by: Jiri Benc <[email protected]>
Signed-off-by: Haishuang Yan <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/ipv4/gre_demux.c | 7 ++++---
net/ipv4/ip_gre.c | 9 +++------
2 files changed, 7 insertions(+), 9 deletions(-)
diff --git a/net/ipv4/gre_demux.c b/net/ipv4/gre_demux.c
index b798862b6be5d..7efe740c06ebf 100644
--- a/net/ipv4/gre_demux.c
+++ b/net/ipv4/gre_demux.c
@@ -86,13 +86,14 @@ int gre_parse_header(struct sk_buff *skb, struct tnl_ptk_info *tpi,
options = (__be32 *)(greh + 1);
if (greh->flags & GRE_CSUM) {
- if (skb_checksum_simple_validate(skb)) {
+ if (!skb_checksum_simple_validate(skb)) {
+ skb_checksum_try_convert(skb, IPPROTO_GRE, 0,
+ null_compute_pseudo);
+ } else if (csum_err) {
*csum_err = true;
return -EINVAL;
}
- skb_checksum_try_convert(skb, IPPROTO_GRE, 0,
- null_compute_pseudo);
options++;
}
diff --git a/net/ipv4/ip_gre.c b/net/ipv4/ip_gre.c
index 576f705d81809..9609ad71dd260 100644
--- a/net/ipv4/ip_gre.c
+++ b/net/ipv4/ip_gre.c
@@ -224,13 +224,10 @@ static void gre_err(struct sk_buff *skb, u32 info)
const int type = icmp_hdr(skb)->type;
const int code = icmp_hdr(skb)->code;
struct tnl_ptk_info tpi;
- bool csum_err = false;
- if (gre_parse_header(skb, &tpi, &csum_err, htons(ETH_P_IP),
- iph->ihl * 4) < 0) {
- if (!csum_err) /* ignore csum errors. */
- return;
- }
+ if (gre_parse_header(skb, &tpi, NULL, htons(ETH_P_IP),
+ iph->ihl * 4) < 0)
+ return;
if (type == ICMP_DEST_UNREACH && code == ICMP_FRAG_NEEDED) {
ipv4_update_pmtu(skb, dev_net(skb->dev), info,
--
2.20.1
From: Nathan Chancellor <[email protected]>
[ Upstream commit e2bfa4ca23d9b5a7bdfcf21319fad9b59e38a05c ]
Clang warns when one enumerated type is converted implicitly to another:
drivers/mtd/nand/raw/sh_flctl.c:483:46: warning: implicit conversion
from enumeration type 'enum dma_transfer_direction' to different
enumeration type 'enum dma_data_direction' [-Wenum-conversion]
flctl_dma_fifo0_transfer(flctl, buf, rlen, DMA_DEV_TO_MEM) > 0)
~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~
drivers/mtd/nand/raw/sh_flctl.c:542:46: warning: implicit conversion
from enumeration type 'enum dma_transfer_direction' to different
enumeration type 'enum dma_data_direction' [-Wenum-conversion]
flctl_dma_fifo0_transfer(flctl, buf, rlen, DMA_MEM_TO_DEV) > 0)
~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~
2 warnings generated.
Use the proper enums from dma_data_direction to satisfy Clang.
DMA_MEM_TO_DEV = DMA_TO_DEVICE = 1
DMA_DEV_TO_MEM = DMA_FROM_DEVICE = 2
Reported-by: Nick Desaulniers <[email protected]>
Signed-off-by: Nathan Chancellor <[email protected]>
Reviewed-by: Nick Desaulniers <[email protected]>
Signed-off-by: Miquel Raynal <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/mtd/nand/sh_flctl.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/mtd/nand/sh_flctl.c b/drivers/mtd/nand/sh_flctl.c
index 442ce619b3b6d..d6c013f93b8c0 100644
--- a/drivers/mtd/nand/sh_flctl.c
+++ b/drivers/mtd/nand/sh_flctl.c
@@ -480,7 +480,7 @@ static void read_fiforeg(struct sh_flctl *flctl, int rlen, int offset)
/* initiate DMA transfer */
if (flctl->chan_fifo0_rx && rlen >= 32 &&
- flctl_dma_fifo0_transfer(flctl, buf, rlen, DMA_DEV_TO_MEM) > 0)
+ flctl_dma_fifo0_transfer(flctl, buf, rlen, DMA_FROM_DEVICE) > 0)
goto convert; /* DMA success */
/* do polling transfer */
@@ -539,7 +539,7 @@ static void write_ec_fiforeg(struct sh_flctl *flctl, int rlen,
/* initiate DMA transfer */
if (flctl->chan_fifo0_tx && rlen >= 32 &&
- flctl_dma_fifo0_transfer(flctl, buf, rlen, DMA_MEM_TO_DEV) > 0)
+ flctl_dma_fifo0_transfer(flctl, buf, rlen, DMA_TO_DEVICE) > 0)
return; /* DMA success */
/* do polling transfer */
--
2.20.1
From: Trond Myklebust <[email protected]>
[ Upstream commit f42f7c283078ce3c1e8368b140e270755b1ae313 ]
Fix up the priority queue to not batch by owner, but by queue, so that
we allow '1 << priority' elements to be dequeued before switching to
the next priority queue.
The owner field is still used to wake up requests in round robin order
by owner to avoid single processes hogging the RPC layer by loading the
queues.
Signed-off-by: Trond Myklebust <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
include/linux/sunrpc/sched.h | 2 -
net/sunrpc/sched.c | 109 +++++++++++++++++------------------
2 files changed, 54 insertions(+), 57 deletions(-)
diff --git a/include/linux/sunrpc/sched.h b/include/linux/sunrpc/sched.h
index 7ba040c797ec4..da2791b5fe879 100644
--- a/include/linux/sunrpc/sched.h
+++ b/include/linux/sunrpc/sched.h
@@ -185,7 +185,6 @@ struct rpc_timer {
struct rpc_wait_queue {
spinlock_t lock;
struct list_head tasks[RPC_NR_PRIORITY]; /* task queue for each priority level */
- pid_t owner; /* process id of last task serviced */
unsigned char maxpriority; /* maximum priority (0 if queue is not a priority queue) */
unsigned char priority; /* current priority */
unsigned char nr; /* # tasks remaining for cookie */
@@ -201,7 +200,6 @@ struct rpc_wait_queue {
* from a single cookie. The aim is to improve
* performance of NFS operations such as read/write.
*/
-#define RPC_BATCH_COUNT 16
#define RPC_IS_PRIORITY(q) ((q)->maxpriority > 0)
/*
diff --git a/net/sunrpc/sched.c b/net/sunrpc/sched.c
index 600eacce653ae..0ef65822fdd34 100644
--- a/net/sunrpc/sched.c
+++ b/net/sunrpc/sched.c
@@ -99,64 +99,78 @@ __rpc_add_timer(struct rpc_wait_queue *queue, struct rpc_task *task)
list_add(&task->u.tk_wait.timer_list, &queue->timer_list.list);
}
-static void rpc_rotate_queue_owner(struct rpc_wait_queue *queue)
-{
- struct list_head *q = &queue->tasks[queue->priority];
- struct rpc_task *task;
-
- if (!list_empty(q)) {
- task = list_first_entry(q, struct rpc_task, u.tk_wait.list);
- if (task->tk_owner == queue->owner)
- list_move_tail(&task->u.tk_wait.list, q);
- }
-}
-
static void rpc_set_waitqueue_priority(struct rpc_wait_queue *queue, int priority)
{
if (queue->priority != priority) {
- /* Fairness: rotate the list when changing priority */
- rpc_rotate_queue_owner(queue);
queue->priority = priority;
+ queue->nr = 1U << priority;
}
}
-static void rpc_set_waitqueue_owner(struct rpc_wait_queue *queue, pid_t pid)
-{
- queue->owner = pid;
- queue->nr = RPC_BATCH_COUNT;
-}
-
static void rpc_reset_waitqueue_priority(struct rpc_wait_queue *queue)
{
rpc_set_waitqueue_priority(queue, queue->maxpriority);
- rpc_set_waitqueue_owner(queue, 0);
}
/*
- * Add new request to a priority queue.
+ * Add a request to a queue list
*/
-static void __rpc_add_wait_queue_priority(struct rpc_wait_queue *queue,
- struct rpc_task *task,
- unsigned char queue_priority)
+static void
+__rpc_list_enqueue_task(struct list_head *q, struct rpc_task *task)
{
- struct list_head *q;
struct rpc_task *t;
- INIT_LIST_HEAD(&task->u.tk_wait.links);
- if (unlikely(queue_priority > queue->maxpriority))
- queue_priority = queue->maxpriority;
- if (queue_priority > queue->priority)
- rpc_set_waitqueue_priority(queue, queue_priority);
- q = &queue->tasks[queue_priority];
list_for_each_entry(t, q, u.tk_wait.list) {
if (t->tk_owner == task->tk_owner) {
- list_add_tail(&task->u.tk_wait.list, &t->u.tk_wait.links);
+ list_add_tail(&task->u.tk_wait.links,
+ &t->u.tk_wait.links);
+ /* Cache the queue head in task->u.tk_wait.list */
+ task->u.tk_wait.list.next = q;
+ task->u.tk_wait.list.prev = NULL;
return;
}
}
+ INIT_LIST_HEAD(&task->u.tk_wait.links);
list_add_tail(&task->u.tk_wait.list, q);
}
+/*
+ * Remove request from a queue list
+ */
+static void
+__rpc_list_dequeue_task(struct rpc_task *task)
+{
+ struct list_head *q;
+ struct rpc_task *t;
+
+ if (task->u.tk_wait.list.prev == NULL) {
+ list_del(&task->u.tk_wait.links);
+ return;
+ }
+ if (!list_empty(&task->u.tk_wait.links)) {
+ t = list_first_entry(&task->u.tk_wait.links,
+ struct rpc_task,
+ u.tk_wait.links);
+ /* Assume __rpc_list_enqueue_task() cached the queue head */
+ q = t->u.tk_wait.list.next;
+ list_add_tail(&t->u.tk_wait.list, q);
+ list_del(&task->u.tk_wait.links);
+ }
+ list_del(&task->u.tk_wait.list);
+}
+
+/*
+ * Add new request to a priority queue.
+ */
+static void __rpc_add_wait_queue_priority(struct rpc_wait_queue *queue,
+ struct rpc_task *task,
+ unsigned char queue_priority)
+{
+ if (unlikely(queue_priority > queue->maxpriority))
+ queue_priority = queue->maxpriority;
+ __rpc_list_enqueue_task(&queue->tasks[queue_priority], task);
+}
+
/*
* Add new request to wait queue.
*
@@ -194,13 +208,7 @@ static void __rpc_add_wait_queue(struct rpc_wait_queue *queue,
*/
static void __rpc_remove_wait_queue_priority(struct rpc_task *task)
{
- struct rpc_task *t;
-
- if (!list_empty(&task->u.tk_wait.links)) {
- t = list_entry(task->u.tk_wait.links.next, struct rpc_task, u.tk_wait.list);
- list_move(&t->u.tk_wait.list, &task->u.tk_wait.list);
- list_splice_init(&task->u.tk_wait.links, &t->u.tk_wait.links);
- }
+ __rpc_list_dequeue_task(task);
}
/*
@@ -212,7 +220,8 @@ static void __rpc_remove_wait_queue(struct rpc_wait_queue *queue, struct rpc_tas
__rpc_disable_timer(queue, task);
if (RPC_IS_PRIORITY(queue))
__rpc_remove_wait_queue_priority(task);
- list_del(&task->u.tk_wait.list);
+ else
+ list_del(&task->u.tk_wait.list);
queue->qlen--;
dprintk("RPC: %5u removed from queue %p \"%s\"\n",
task->tk_pid, queue, rpc_qname(queue));
@@ -481,17 +490,9 @@ static struct rpc_task *__rpc_find_next_queued_priority(struct rpc_wait_queue *q
* Service a batch of tasks from a single owner.
*/
q = &queue->tasks[queue->priority];
- if (!list_empty(q)) {
- task = list_entry(q->next, struct rpc_task, u.tk_wait.list);
- if (queue->owner == task->tk_owner) {
- if (--queue->nr)
- goto out;
- list_move_tail(&task->u.tk_wait.list, q);
- }
- /*
- * Check if we need to switch queues.
- */
- goto new_owner;
+ if (!list_empty(q) && --queue->nr) {
+ task = list_first_entry(q, struct rpc_task, u.tk_wait.list);
+ goto out;
}
/*
@@ -503,7 +504,7 @@ static struct rpc_task *__rpc_find_next_queued_priority(struct rpc_wait_queue *q
else
q = q - 1;
if (!list_empty(q)) {
- task = list_entry(q->next, struct rpc_task, u.tk_wait.list);
+ task = list_first_entry(q, struct rpc_task, u.tk_wait.list);
goto new_queue;
}
} while (q != &queue->tasks[queue->priority]);
@@ -513,8 +514,6 @@ static struct rpc_task *__rpc_find_next_queued_priority(struct rpc_wait_queue *q
new_queue:
rpc_set_waitqueue_priority(queue, (unsigned int)(q - &queue->tasks[0]));
-new_owner:
- rpc_set_waitqueue_owner(queue, task->tk_owner);
out:
return task;
}
--
2.20.1
From: Wei Yongjun <[email protected]>
[ Upstream commit 39f2495618c5e980d2873ea3f2d1877dd253e07a ]
Fix to return a negative error code from the mthca_cmd_init() error
handling case instead of 0, as done elsewhere in this function.
Fixes: 80fd8238734c ("[PATCH] IB/mthca: Encapsulate command interface init")
Signed-off-by: Wei Yongjun <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/infiniband/hw/mthca/mthca_main.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/infiniband/hw/mthca/mthca_main.c b/drivers/infiniband/hw/mthca/mthca_main.c
index ded76c101dde3..834b06aacc2bf 100644
--- a/drivers/infiniband/hw/mthca/mthca_main.c
+++ b/drivers/infiniband/hw/mthca/mthca_main.c
@@ -989,7 +989,8 @@ static int __mthca_init_one(struct pci_dev *pdev, int hca_type)
goto err_free_dev;
}
- if (mthca_cmd_init(mdev)) {
+ err = mthca_cmd_init(mdev);
+ if (err) {
mthca_err(mdev, "Failed to init command interface, aborting.\n");
goto err_free_dev;
}
--
2.20.1
From: Nathan Chancellor <[email protected]>
[ Upstream commit b56511c15713ba6c7572e77a41f7ddba9c1053ec ]
Clang warns when one enumerated type is implicitly converted to another.
drivers/infiniband/hw/mlx4/mad.c:1811:41: warning: implicit conversion
from enumeration type 'enum mlx4_ib_qp_flags' to different enumeration
type 'enum ib_qp_create_flags' [-Wenum-conversion]
qp_init_attr.init_attr.create_flags = MLX4_IB_SRIOV_TUNNEL_QP;
~ ^~~~~~~~~~~~~~~~~~~~~~~
drivers/infiniband/hw/mlx4/mad.c:1819:41: warning: implicit conversion
from enumeration type 'enum mlx4_ib_qp_flags' to different enumeration
type 'enum ib_qp_create_flags' [-Wenum-conversion]
qp_init_attr.init_attr.create_flags = MLX4_IB_SRIOV_SQP;
~ ^~~~~~~~~~~~~~~~~
The type mlx4_ib_qp_flags explicitly provides supplemental values to the
type ib_qp_create_flags. Make that clear to Clang by changing the
create_flags type to u32.
Reported-by: Nick Desaulniers <[email protected]>
Signed-off-by: Nathan Chancellor <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
include/rdma/ib_verbs.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/include/rdma/ib_verbs.h b/include/rdma/ib_verbs.h
index 0638b8aeba34d..1d9c701b1c7b3 100644
--- a/include/rdma/ib_verbs.h
+++ b/include/rdma/ib_verbs.h
@@ -1026,7 +1026,7 @@ struct ib_qp_init_attr {
struct ib_qp_cap cap;
enum ib_sig_type sq_sig_type;
enum ib_qp_type qp_type;
- enum ib_qp_create_flags create_flags;
+ u32 create_flags;
/*
* Only needed for special QP types, or when using the RW API.
--
2.20.1
From: Dinh Nguyen <[email protected]>
[ Upstream commit cbbc488ed85061a765cf370c3e41f383c1e0add6 ]
dtc has new checks for I2C buses. Fix the warnings in unit-addresses.
arch/arm/boot/dts/socfpga_cyclone5_de0_sockit.dtb: Warning (i2c_bus_reg): /soc/i2c@ffc04000/adxl345@0: I2C bus unit address format error, expected "53"
Signed-off-by: Rob Herring <[email protected]>
Signed-off-by: Dinh Nguyen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm/boot/dts/socfpga_cyclone5_de0_sockit.dts | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/socfpga_cyclone5_de0_sockit.dts b/arch/arm/boot/dts/socfpga_cyclone5_de0_sockit.dts
index afea3645ada43..89d55894d9162 100644
--- a/arch/arm/boot/dts/socfpga_cyclone5_de0_sockit.dts
+++ b/arch/arm/boot/dts/socfpga_cyclone5_de0_sockit.dts
@@ -88,7 +88,7 @@
status = "okay";
speed-mode = <0>;
- adxl345: adxl345@0 {
+ adxl345: adxl345@53 {
compatible = "adi,adxl345";
reg = <0x53>;
--
2.20.1
From: Nathan Chancellor <[email protected]>
[ Upstream commit 6adde4a36f1b6a562a1057fbb1065007851050e7 ]
Clang warns when one enumerated type is implicitly converted to another.
drivers/ata/pata_ep93xx.c:662:36: warning: implicit conversion from
enumeration type 'enum dma_data_direction' to different enumeration type
'enum dma_transfer_direction' [-Wenum-conversion]
drv_data->dma_rx_data.direction = DMA_FROM_DEVICE;
~ ^~~~~~~~~~~~~~~
drivers/ata/pata_ep93xx.c:670:36: warning: implicit conversion from
enumeration type 'enum dma_data_direction' to different enumeration type
'enum dma_transfer_direction' [-Wenum-conversion]
drv_data->dma_tx_data.direction = DMA_TO_DEVICE;
~ ^~~~~~~~~~~~~
drivers/ata/pata_ep93xx.c:681:19: warning: implicit conversion from
enumeration type 'enum dma_data_direction' to different enumeration type
'enum dma_transfer_direction' [-Wenum-conversion]
conf.direction = DMA_FROM_DEVICE;
~ ^~~~~~~~~~~~~~~
drivers/ata/pata_ep93xx.c:692:19: warning: implicit conversion from
enumeration type 'enum dma_data_direction' to different enumeration type
'enum dma_transfer_direction' [-Wenum-conversion]
conf.direction = DMA_TO_DEVICE;
~ ^~~~~~~~~~~~~
Use the equivalent valued enums from the expected type so that Clang no
longer warns about a conversion.
DMA_TO_DEVICE = DMA_MEM_TO_DEV = 1
DMA_FROM_DEVICE = DMA_DEV_TO_MEM = 2
Acked-by: Bartlomiej Zolnierkiewicz <[email protected]>
Signed-off-by: Nathan Chancellor <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/ata/pata_ep93xx.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/ata/pata_ep93xx.c b/drivers/ata/pata_ep93xx.c
index bd6b089c67a3a..634c814cbeda4 100644
--- a/drivers/ata/pata_ep93xx.c
+++ b/drivers/ata/pata_ep93xx.c
@@ -659,7 +659,7 @@ static void ep93xx_pata_dma_init(struct ep93xx_pata_data *drv_data)
* start of new transfer.
*/
drv_data->dma_rx_data.port = EP93XX_DMA_IDE;
- drv_data->dma_rx_data.direction = DMA_FROM_DEVICE;
+ drv_data->dma_rx_data.direction = DMA_DEV_TO_MEM;
drv_data->dma_rx_data.name = "ep93xx-pata-rx";
drv_data->dma_rx_channel = dma_request_channel(mask,
ep93xx_pata_dma_filter, &drv_data->dma_rx_data);
@@ -667,7 +667,7 @@ static void ep93xx_pata_dma_init(struct ep93xx_pata_data *drv_data)
return;
drv_data->dma_tx_data.port = EP93XX_DMA_IDE;
- drv_data->dma_tx_data.direction = DMA_TO_DEVICE;
+ drv_data->dma_tx_data.direction = DMA_MEM_TO_DEV;
drv_data->dma_tx_data.name = "ep93xx-pata-tx";
drv_data->dma_tx_channel = dma_request_channel(mask,
ep93xx_pata_dma_filter, &drv_data->dma_tx_data);
@@ -678,7 +678,7 @@ static void ep93xx_pata_dma_init(struct ep93xx_pata_data *drv_data)
/* Configure receive channel direction and source address */
memset(&conf, 0, sizeof(conf));
- conf.direction = DMA_FROM_DEVICE;
+ conf.direction = DMA_DEV_TO_MEM;
conf.src_addr = drv_data->udma_in_phys;
conf.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
if (dmaengine_slave_config(drv_data->dma_rx_channel, &conf)) {
@@ -689,7 +689,7 @@ static void ep93xx_pata_dma_init(struct ep93xx_pata_data *drv_data)
/* Configure transmit channel direction and destination address */
memset(&conf, 0, sizeof(conf));
- conf.direction = DMA_TO_DEVICE;
+ conf.direction = DMA_MEM_TO_DEV;
conf.dst_addr = drv_data->udma_out_phys;
conf.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
if (dmaengine_slave_config(drv_data->dma_tx_channel, &conf)) {
--
2.20.1
From: Justin Ernst <[email protected]>
[ Upstream commit 6b58859419554fb824e09cfdd73151a195473cbc ]
We observe an oops in the skx_edac module during boot:
EDAC MC0: Giving out device to module skx_edac controller Skylake Socket#0 IMC#0
EDAC MC1: Giving out device to module skx_edac controller Skylake Socket#0 IMC#1
EDAC MC2: Giving out device to module skx_edac controller Skylake Socket#1 IMC#0
...
EDAC MC13: Giving out device to module skx_edac controller Skylake Socket#0 IMC#1
EDAC MC14: Giving out device to module skx_edac controller Skylake Socket#1 IMC#0
EDAC MC15: Giving out device to module skx_edac controller Skylake Socket#1 IMC#1
Too many memory controllers: 16
EDAC MC: Removed device 0 for skx_edac Skylake Socket#0 IMC#0
We observe there are two memory controllers per socket, with a limit
of 16. Raise the maximum number of memory controllers from 16 to 2 *
MAX_NUMNODES (1024).
[ bp: This is just a band-aid fix until we've sorted out the whole issue
with the bus_type association and handling in EDAC and can get rid of
this arbitrary limit. ]
Signed-off-by: Justin Ernst <[email protected]>
Signed-off-by: Borislav Petkov <[email protected]>
Acked-by: Russ Anderson <[email protected]>
Cc: Mauro Carvalho Chehab <[email protected]>
Cc: [email protected]
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
include/linux/edac.h | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/include/linux/edac.h b/include/linux/edac.h
index 9e0d78966552c..c6233227720c7 100644
--- a/include/linux/edac.h
+++ b/include/linux/edac.h
@@ -17,6 +17,7 @@
#include <linux/completion.h>
#include <linux/workqueue.h>
#include <linux/debugfs.h>
+#include <linux/numa.h>
struct device;
@@ -778,6 +779,6 @@ struct mem_ctl_info {
/*
* Maximum number of memory controllers in the coherent fabric.
*/
-#define EDAC_MAX_MCS 16
+#define EDAC_MAX_MCS 2 * MAX_NUMNODES
#endif
--
2.20.1
From: Jia-Ju Bai <[email protected]>
[ Upstream commit 2337a77c1cc86bc4e504ecf3799f947659c86026 ]
The driver may sleep in an interrupt handler.
The function call path (from bottom to top) in Linux-4.17 is:
[FUNC] fotg210_ep_queue(GFP_KERNEL)
drivers/usb/gadget/udc/fotg210-udc.c, 744:
fotg210_ep_queue in fotg210_get_status
drivers/usb/gadget/udc/fotg210-udc.c, 768:
fotg210_get_status in fotg210_setup_packet
drivers/usb/gadget/udc/fotg210-udc.c, 949:
fotg210_setup_packet in fotg210_irq (interrupt handler)
To fix this bug, GFP_KERNEL is replaced with GFP_ATOMIC.
If possible, spin_unlock() and spin_lock() around fotg210_ep_queue()
can be also removed.
This bug is found by my static analysis tool DSAC.
Signed-off-by: Jia-Ju Bai <[email protected]>
Signed-off-by: Felipe Balbi <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/usb/gadget/udc/fotg210-udc.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/usb/gadget/udc/fotg210-udc.c b/drivers/usb/gadget/udc/fotg210-udc.c
index 95df2b3bb6a1a..76e991557116a 100644
--- a/drivers/usb/gadget/udc/fotg210-udc.c
+++ b/drivers/usb/gadget/udc/fotg210-udc.c
@@ -744,7 +744,7 @@ static void fotg210_get_status(struct fotg210_udc *fotg210,
fotg210->ep0_req->length = 2;
spin_unlock(&fotg210->lock);
- fotg210_ep_queue(fotg210->gadget.ep0, fotg210->ep0_req, GFP_KERNEL);
+ fotg210_ep_queue(fotg210->gadget.ep0, fotg210->ep0_req, GFP_ATOMIC);
spin_lock(&fotg210->lock);
}
--
2.20.1
From: Johan Hovold <[email protected]>
[ Upstream commit 56445eef55cb5904096fed7a73cf87b755dfffc7 ]
Fix interrupt-out transfer length which was being set to the
transfer-buffer length rather than the size of the outgoing packet.
Note that no slab data was leaked as the whole transfer buffer is always
cleared before each transfer.
Fixes: 9aa8dae7b1fa ("cypress_m8: use usb_fill_int_urb where appropriate")
Signed-off-by: Johan Hovold <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/usb/serial/cypress_m8.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/usb/serial/cypress_m8.c b/drivers/usb/serial/cypress_m8.c
index bbeeb2bd55a83..2c915be1db4ce 100644
--- a/drivers/usb/serial/cypress_m8.c
+++ b/drivers/usb/serial/cypress_m8.c
@@ -773,7 +773,7 @@ static void cypress_send(struct usb_serial_port *port)
usb_fill_int_urb(port->interrupt_out_urb, port->serial->dev,
usb_sndintpipe(port->serial->dev, port->interrupt_out_endpointAddress),
- port->interrupt_out_buffer, port->interrupt_out_size,
+ port->interrupt_out_buffer, actual_size,
cypress_write_int_callback, port, priv->write_urb_interval);
result = usb_submit_urb(port->interrupt_out_urb, GFP_ATOMIC);
if (result) {
--
2.20.1
From: Ricardo Ribalda Delgado <[email protected]>
[ Upstream commit ef0de747f7ad179c7698a5b0e28db05f18ecbf57 ]
During probe, if there was an error the memory region and the memory
map were not properly released.This can lead a system unusable if
deferred probe is in use.
Replace mem_request and map with devm_ioremap_resource
Signed-off-by: Ricardo Ribalda Delgado <[email protected]>
Signed-off-by: Boris Brezillon <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/mtd/maps/physmap_of.c | 27 +++++----------------------
1 file changed, 5 insertions(+), 22 deletions(-)
diff --git a/drivers/mtd/maps/physmap_of.c b/drivers/mtd/maps/physmap_of.c
index 3fad35942895c..7a716bed11580 100644
--- a/drivers/mtd/maps/physmap_of.c
+++ b/drivers/mtd/maps/physmap_of.c
@@ -29,7 +29,6 @@
struct of_flash_list {
struct mtd_info *mtd;
struct map_info map;
- struct resource *res;
};
struct of_flash {
@@ -54,18 +53,10 @@ static int of_flash_remove(struct platform_device *dev)
mtd_concat_destroy(info->cmtd);
}
- for (i = 0; i < info->list_size; i++) {
+ for (i = 0; i < info->list_size; i++)
if (info->list[i].mtd)
map_destroy(info->list[i].mtd);
- if (info->list[i].map.virt)
- iounmap(info->list[i].map.virt);
-
- if (info->list[i].res) {
- release_resource(info->list[i].res);
- kfree(info->list[i].res);
- }
- }
return 0;
}
@@ -223,10 +214,11 @@ static int of_flash_probe(struct platform_device *dev)
err = -EBUSY;
res_size = resource_size(&res);
- info->list[i].res = request_mem_region(res.start, res_size,
- dev_name(&dev->dev));
- if (!info->list[i].res)
+ info->list[i].map.virt = devm_ioremap_resource(&dev->dev, &res);
+ if (IS_ERR(info->list[i].map.virt)) {
+ err = PTR_ERR(info->list[i].map.virt);
goto err_out;
+ }
err = -ENXIO;
width = of_get_property(dp, "bank-width", NULL);
@@ -247,15 +239,6 @@ static int of_flash_probe(struct platform_device *dev)
return err;
}
- err = -ENOMEM;
- info->list[i].map.virt = ioremap(info->list[i].map.phys,
- info->list[i].map.size);
- if (!info->list[i].map.virt) {
- dev_err(&dev->dev, "Failed to ioremap() flash"
- " region\n");
- goto err_out;
- }
-
simple_map_init(&info->list[i].map);
/*
--
2.20.1
From: Finn Thain <[email protected]>
[ Upstream commit 7ef55f6744c45e3d7c85a3f74ada39b67ac741dd ]
The X3T9.2 specification (draft) says, under "6.1.4.1 RESELECTION", that "the
initiator shall not respond to a RESELECTION phase if other than two SCSI ID
bits are on the DATA BUS." This issue (too many bits set) has been observed in
the wild, so add a check.
Tested-by: Michael Schmitz <[email protected]>
Signed-off-by: Finn Thain <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/scsi/NCR5380.c | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/drivers/scsi/NCR5380.c b/drivers/scsi/NCR5380.c
index 35419ba32c467..15c0fff7519be 100644
--- a/drivers/scsi/NCR5380.c
+++ b/drivers/scsi/NCR5380.c
@@ -2102,6 +2102,11 @@ static void NCR5380_reselect(struct Scsi_Host *instance)
NCR5380_write(MODE_REG, MR_BASE);
target_mask = NCR5380_read(CURRENT_SCSI_DATA_REG) & ~(hostdata->id_mask);
+ if (!target_mask || target_mask & (target_mask - 1)) {
+ shost_printk(KERN_WARNING, instance,
+ "reselect: bad target_mask 0x%02x\n", target_mask);
+ return;
+ }
dsprintk(NDEBUG_RESELECTION, instance, "reselect\n");
--
2.20.1
From: Dan Aloni <[email protected]>
[ Upstream commit 3944f139d5592790b70bc64f197162e643a8512b ]
The encryption mode of pkcs1pad never uses out_sg and out_buf, so
there's no need to allocate the buffer, which presently is not even
being freed.
CC: Herbert Xu <[email protected]>
CC: [email protected]
CC: "David S. Miller" <[email protected]>
Signed-off-by: Dan Aloni <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
crypto/rsa-pkcs1pad.c | 9 ---------
1 file changed, 9 deletions(-)
diff --git a/crypto/rsa-pkcs1pad.c b/crypto/rsa-pkcs1pad.c
index 7830d304dff6f..d58224d808675 100644
--- a/crypto/rsa-pkcs1pad.c
+++ b/crypto/rsa-pkcs1pad.c
@@ -267,15 +267,6 @@ static int pkcs1pad_encrypt(struct akcipher_request *req)
pkcs1pad_sg_set_buf(req_ctx->in_sg, req_ctx->in_buf,
ctx->key_size - 1 - req->src_len, req->src);
- req_ctx->out_buf = kmalloc(ctx->key_size, GFP_KERNEL);
- if (!req_ctx->out_buf) {
- kfree(req_ctx->in_buf);
- return -ENOMEM;
- }
-
- pkcs1pad_sg_set_buf(req_ctx->out_sg, req_ctx->out_buf,
- ctx->key_size, NULL);
-
akcipher_request_set_tfm(&req_ctx->child_req, ctx->child);
akcipher_request_set_callback(&req_ctx->child_req, req->base.flags,
pkcs1pad_encrypt_sign_complete_cb, req);
--
2.20.1
From: Finn Thain <[email protected]>
[ Upstream commit ca694afad707cb3ae2fdef3b28454444d9ac726e ]
The X3T9.2 specification (draft) says, under "6.1.4.2 RESELECTION time-out
procedure", that a target may assert RST or go to BUS FREE phase if the
initiator does not respond within 200 us. Something like this has been
observed with AztecMonster II target. When it happens, all we can do is wait
for the target to try again.
Tested-by: Michael Schmitz <[email protected]>
Signed-off-by: Finn Thain <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/scsi/NCR5380.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/scsi/NCR5380.c b/drivers/scsi/NCR5380.c
index 03f9ddbc37fbb..27270631c70c2 100644
--- a/drivers/scsi/NCR5380.c
+++ b/drivers/scsi/NCR5380.c
@@ -2133,6 +2133,9 @@ static void NCR5380_reselect(struct Scsi_Host *instance)
if (NCR5380_poll_politely(instance,
STATUS_REG, SR_REQ, SR_REQ, 2 * HZ) < 0) {
+ if ((NCR5380_read(STATUS_REG) & (SR_BSY | SR_SEL)) == 0)
+ /* BUS FREE phase */
+ return;
shost_printk(KERN_ERR, instance, "reselect: REQ timeout\n");
do_abort(instance);
return;
--
2.20.1
From: Li Qiang <[email protected]>
[ Upstream commit 30ea32ab1951c80c6113f300fce2c70cd12659e4 ]
Free allocated vdev->msi_perm in error path.
Signed-off-by: Li Qiang <[email protected]>
Reviewed-by: Eric Auger <[email protected]>
Signed-off-by: Alex Williamson <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/vfio/pci/vfio_pci_config.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/vfio/pci/vfio_pci_config.c b/drivers/vfio/pci/vfio_pci_config.c
index 7b8a957b008d2..06a20ea183dd6 100644
--- a/drivers/vfio/pci/vfio_pci_config.c
+++ b/drivers/vfio/pci/vfio_pci_config.c
@@ -1182,8 +1182,10 @@ static int vfio_msi_cap_len(struct vfio_pci_device *vdev, u8 pos)
return -ENOMEM;
ret = init_pci_cap_msi_perm(vdev->msi_perm, len, flags);
- if (ret)
+ if (ret) {
+ kfree(vdev->msi_perm);
return ret;
+ }
return len;
}
--
2.20.1
From: Finn Thain <[email protected]>
[ Upstream commit 45ddc1b24806cc8f1a09f23dd4e7b6e4a8ae36e1 ]
When NCR5380_abort() returns FAILED, the driver forgets that the target is
still busy. Hence, further commands may be sent to the target, which may fail
during selection and produce the error message, "reselection after won
arbitration?". Prevent this by leaving the busy flag set when NCR5380_abort()
fails.
Tested-by: Michael Schmitz <[email protected]>
Signed-off-by: Finn Thain <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/scsi/NCR5380.c | 14 ++++++++++----
1 file changed, 10 insertions(+), 4 deletions(-)
diff --git a/drivers/scsi/NCR5380.c b/drivers/scsi/NCR5380.c
index 15c0fff7519be..a4856eeac26f6 100644
--- a/drivers/scsi/NCR5380.c
+++ b/drivers/scsi/NCR5380.c
@@ -626,8 +626,6 @@ static void complete_cmd(struct Scsi_Host *instance,
hostdata->sensing = NULL;
}
- hostdata->busy[scmd_id(cmd)] &= ~(1 << cmd->device->lun);
-
cmd->scsi_done(cmd);
}
@@ -1799,6 +1797,7 @@ static void NCR5380_information_transfer(struct Scsi_Host *instance)
cmd->result = DID_ERROR << 16;
complete_cmd(instance, cmd);
hostdata->connected = NULL;
+ hostdata->busy[scmd_id(cmd)] &= ~(1 << cmd->device->lun);
return;
#endif
case PHASE_DATAIN:
@@ -1881,6 +1880,7 @@ static void NCR5380_information_transfer(struct Scsi_Host *instance)
cmd, scmd_id(cmd), cmd->device->lun);
hostdata->connected = NULL;
+ hostdata->busy[scmd_id(cmd)] &= ~(1 << cmd->device->lun);
cmd->result &= ~0xffff;
cmd->result |= cmd->SCp.Status;
@@ -2040,6 +2040,7 @@ static void NCR5380_information_transfer(struct Scsi_Host *instance)
NCR5380_transfer_pio(instance, &phase, &len, &data);
if (msgout == ABORT) {
hostdata->connected = NULL;
+ hostdata->busy[scmd_id(cmd)] &= ~(1 << cmd->device->lun);
cmd->result = DID_ERROR << 16;
complete_cmd(instance, cmd);
maybe_release_dma_irq(instance);
@@ -2194,13 +2195,16 @@ static void NCR5380_reselect(struct Scsi_Host *instance)
dsprintk(NDEBUG_RESELECTION | NDEBUG_QUEUES, instance,
"reselect: removed %p from disconnected queue\n", tmp);
} else {
+ int target = ffs(target_mask) - 1;
+
shost_printk(KERN_ERR, instance, "target bitmask 0x%02x lun %d not in disconnected queue.\n",
target_mask, lun);
/*
* Since we have an established nexus that we can't do anything
* with, we must abort it.
*/
- do_abort(instance);
+ if (do_abort(instance) == 0)
+ hostdata->busy[target] &= ~(1 << lun);
return;
}
@@ -2368,8 +2372,10 @@ static int NCR5380_abort(struct scsi_cmnd *cmd)
out:
if (result == FAILED)
dsprintk(NDEBUG_ABORT, instance, "abort: failed to abort %p\n", cmd);
- else
+ else {
+ hostdata->busy[scmd_id(cmd)] &= ~(1 << cmd->device->lun);
dsprintk(NDEBUG_ABORT, instance, "abort: successfully aborted %p\n", cmd);
+ }
queue_work(hostdata->work_q, &hostdata->main_task);
maybe_release_dma_irq(instance);
--
2.20.1
From: Olga Kornievskaia <[email protected]>
[ Upstream commit 44f411c353bf6d98d5a34f8f1b8605d43b2e50b8 ]
Running "./nfstest_delegation --runtest recall26" uncovers that
client doesn't recover the lock when we have an appending open,
where the initial open got a write delegation.
Instead of checking for the passed in open context against
the file lock's open context. Check that the state is the same.
Signed-off-by: Olga Kornievskaia <[email protected]>
Signed-off-by: Trond Myklebust <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/nfs/delegation.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/fs/nfs/delegation.c b/fs/nfs/delegation.c
index 46afd7cdcc378..9a8830a0f31f9 100644
--- a/fs/nfs/delegation.c
+++ b/fs/nfs/delegation.c
@@ -101,7 +101,7 @@ int nfs4_check_delegation(struct inode *inode, fmode_t flags)
return nfs4_do_check_delegation(inode, flags, false);
}
-static int nfs_delegation_claim_locks(struct nfs_open_context *ctx, struct nfs4_state *state, const nfs4_stateid *stateid)
+static int nfs_delegation_claim_locks(struct nfs4_state *state, const nfs4_stateid *stateid)
{
struct inode *inode = state->inode;
struct file_lock *fl;
@@ -116,7 +116,7 @@ static int nfs_delegation_claim_locks(struct nfs_open_context *ctx, struct nfs4_
spin_lock(&flctx->flc_lock);
restart:
list_for_each_entry(fl, list, fl_list) {
- if (nfs_file_open_context(fl->fl_file) != ctx)
+ if (nfs_file_open_context(fl->fl_file)->state != state)
continue;
spin_unlock(&flctx->flc_lock);
status = nfs4_lock_delegation_recall(fl, state, stateid);
@@ -163,7 +163,7 @@ static int nfs_delegation_claim_opens(struct inode *inode,
seq = raw_seqcount_begin(&sp->so_reclaim_seqcount);
err = nfs4_open_delegation_recall(ctx, state, stateid, type);
if (!err)
- err = nfs_delegation_claim_locks(ctx, state, stateid);
+ err = nfs_delegation_claim_locks(state, stateid);
if (!err && read_seqcount_retry(&sp->so_reclaim_seqcount, seq))
err = -EAGAIN;
mutex_unlock(&sp->so_delegreturn_mutex);
--
2.20.1
From: Laurent Pinchart <[email protected]>
[ Upstream commit 8dbf9c7abefd5c1434a956d5c6b25e11183061a3 ]
When USB requests for video data fail to be submitted, the driver
signals a problem to the host by halting the video streaming endpoint.
This is only valid in bulk mode, as isochronous transfers have no
handshake phase and can't thus report a stall. The usb_ep_set_halt()
call returns an error when using isochronous endpoints, which we happily
ignore, but some UDCs complain in the kernel log. Fix this by only
trying to halt the endpoint in bulk mode.
Signed-off-by: Laurent Pinchart <[email protected]>
Reviewed-by: Paul Elder <[email protected]>
Tested-by: Paul Elder <[email protected]>
Reviewed-by: Kieran Bingham <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/usb/gadget/function/uvc_video.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/usb/gadget/function/uvc_video.c b/drivers/usb/gadget/function/uvc_video.c
index 540917f54506a..d6bab12b0b47d 100644
--- a/drivers/usb/gadget/function/uvc_video.c
+++ b/drivers/usb/gadget/function/uvc_video.c
@@ -136,7 +136,9 @@ static int uvcg_video_ep_queue(struct uvc_video *video, struct usb_request *req)
ret = usb_ep_queue(video->ep, req, GFP_ATOMIC);
if (ret < 0) {
printk(KERN_INFO "Failed to queue request (%d).\n", ret);
- usb_ep_set_halt(video->ep);
+ /* Isochronous endpoints can't be halted. */
+ if (usb_endpoint_xfer_bulk(video->ep->desc))
+ usb_ep_set_halt(video->ep);
}
return ret;
--
2.20.1
From: Julian Sax <[email protected]>
[ Upstream commit dde27443211062e841806feaf690674b7c3a599f ]
A certain silead controller (Chip ID: 0x56810000) loses its firmware
after suspend, causing the resume to fail. This patch tries to load
the firmware, should a resume error occur and retries the resuming.
Signed-off-by: Julian Sax <[email protected]>
Acked-by: Hans de Goede <[email protected]>
Signed-off-by: Dmitry Torokhov <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/input/touchscreen/silead.c | 13 +++++++++++++
1 file changed, 13 insertions(+)
diff --git a/drivers/input/touchscreen/silead.c b/drivers/input/touchscreen/silead.c
index f502c8488be86..867772878c0c8 100644
--- a/drivers/input/touchscreen/silead.c
+++ b/drivers/input/touchscreen/silead.c
@@ -504,20 +504,33 @@ static int __maybe_unused silead_ts_suspend(struct device *dev)
static int __maybe_unused silead_ts_resume(struct device *dev)
{
struct i2c_client *client = to_i2c_client(dev);
+ bool second_try = false;
int error, status;
silead_ts_set_power(client, SILEAD_POWER_ON);
+ retry:
error = silead_ts_reset(client);
if (error)
return error;
+ if (second_try) {
+ error = silead_ts_load_fw(client);
+ if (error)
+ return error;
+ }
+
error = silead_ts_startup(client);
if (error)
return error;
status = silead_ts_get_status(client);
if (status != SILEAD_STATUS_OK) {
+ if (!second_try) {
+ second_try = true;
+ dev_dbg(dev, "Reloading firmware after unsuccessful resume\n");
+ goto retry;
+ }
dev_err(dev, "Resume error, status: 0x%02x\n", status);
return -ENODEV;
}
--
2.20.1
From: Chunfeng Yun <[email protected]>
[ Upstream commit 87173acc0d8f0987bda8827da35fff67f52ad15d ]
If the interval equal zero, needn't round up to power of two
for the number of packets in each ESIT, so fix it.
Signed-off-by: Chunfeng Yun <[email protected]>
Signed-off-by: Mathias Nyman <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/usb/host/xhci-mtk-sch.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/usb/host/xhci-mtk-sch.c b/drivers/usb/host/xhci-mtk-sch.c
index 73f763c4f5f59..144674913c788 100644
--- a/drivers/usb/host/xhci-mtk-sch.c
+++ b/drivers/usb/host/xhci-mtk-sch.c
@@ -122,7 +122,9 @@ static void setup_sch_info(struct usb_device *udev,
}
if (ep_type == ISOC_IN_EP || ep_type == ISOC_OUT_EP) {
- if (esit_pkts <= sch_ep->esit)
+ if (sch_ep->esit == 1)
+ sch_ep->pkts = esit_pkts;
+ else if (esit_pkts <= sch_ep->esit)
sch_ep->pkts = 1;
else
sch_ep->pkts = roundup_pow_of_two(esit_pkts)
--
2.20.1
From: Leo Yan <[email protected]>
[ Upstream commit e7753f3937610633a540f2be81be87531f96ff04 ]
>From the comment in the code, it claims the requirement for byte-address
alignment for RRP register: 'for 32-bit, 64-bit and 128-bit wide trace
memory, the four LSBs must be 0s. For 256-bit wide trace memory, the
five LSBs must be 0s'. This isn't consistent with the program, the
program sets five LSBs as zeros for 32/64/128-bit wide trace memory and
set six LSBs zeros for 256-bit wide trace memory.
After checking with the CoreSight Trace Memory Controller technical
reference manual (ARM DDI 0461B, section 3.3.4 RAM Read Pointer
Register), it proves the comment is right and the program does wrong
setting.
This patch fixes byte-address alignment for RRP by following correct
definition in the technical reference manual.
Cc: Mathieu Poirier <[email protected]>
Cc: Mike Leach <[email protected]>
Signed-off-by: Leo Yan <[email protected]>
Signed-off-by: Mathieu Poirier <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/hwtracing/coresight/coresight-tmc-etf.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/hwtracing/coresight/coresight-tmc-etf.c b/drivers/hwtracing/coresight/coresight-tmc-etf.c
index d6941ea24d8df..14df4e34c21cf 100644
--- a/drivers/hwtracing/coresight/coresight-tmc-etf.c
+++ b/drivers/hwtracing/coresight/coresight-tmc-etf.c
@@ -425,10 +425,10 @@ static void tmc_update_etf_buffer(struct coresight_device *csdev,
case TMC_MEM_INTF_WIDTH_32BITS:
case TMC_MEM_INTF_WIDTH_64BITS:
case TMC_MEM_INTF_WIDTH_128BITS:
- mask = GENMASK(31, 5);
+ mask = GENMASK(31, 4);
break;
case TMC_MEM_INTF_WIDTH_256BITS:
- mask = GENMASK(31, 6);
+ mask = GENMASK(31, 5);
break;
}
--
2.20.1
From: Ronald Tschalär <[email protected]>
[ Upstream commit 757c968c442397f1249bb775a7c8c03842e3e0c7 ]
There was a small race when removing the sbshc module where
smbus_alarm() had queued acpi_smbus_callback() for deferred execution
but it hadn't been run yet, so that when it did run hc had been freed
and the module unloaded, resulting in an invalid paging request.
A similar race existed when removing the sbs module with regards to
acpi_sbs_callback() (which is called from acpi_smbus_callback()).
We therefore need to ensure no callbacks are pending or executing before
the cleanups are done and the modules are removed.
Signed-off-by: Ronald Tschalär <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/acpi/osl.c | 1 +
drivers/acpi/sbshc.c | 2 ++
2 files changed, 3 insertions(+)
diff --git a/drivers/acpi/osl.c b/drivers/acpi/osl.c
index 416953a425109..b9fade7a3bcf4 100644
--- a/drivers/acpi/osl.c
+++ b/drivers/acpi/osl.c
@@ -1126,6 +1126,7 @@ void acpi_os_wait_events_complete(void)
flush_workqueue(kacpid_wq);
flush_workqueue(kacpi_notify_wq);
}
+EXPORT_SYMBOL(acpi_os_wait_events_complete);
struct acpi_hp_work {
struct work_struct work;
diff --git a/drivers/acpi/sbshc.c b/drivers/acpi/sbshc.c
index 7a3431018e0ab..5008ead4609a4 100644
--- a/drivers/acpi/sbshc.c
+++ b/drivers/acpi/sbshc.c
@@ -196,6 +196,7 @@ int acpi_smbus_unregister_callback(struct acpi_smb_hc *hc)
hc->callback = NULL;
hc->context = NULL;
mutex_unlock(&hc->lock);
+ acpi_os_wait_events_complete();
return 0;
}
@@ -292,6 +293,7 @@ static int acpi_smbus_hc_remove(struct acpi_device *device)
hc = acpi_driver_data(device);
acpi_ec_remove_query_handler(hc->ec, hc->query_bit);
+ acpi_os_wait_events_complete();
kfree(hc);
device->driver_data = NULL;
return 0;
--
2.20.1
From: Radu Solea <[email protected]>
[ Upstream commit c709eebaf5c5faa8a0f140355f9cfe67e8f7afb1 ]
DCP writes at least 32 bytes in the output buffer instead of hash length
as documented. Add intermediate buffer to prevent write out of bounds.
When requested to produce null hashes DCP fails to produce valid output.
Add software workaround to bypass hardware and return valid output.
Signed-off-by: Radu Solea <[email protected]>
Signed-off-by: Leonard Crestez <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/crypto/mxs-dcp.c | 47 +++++++++++++++++++++++++++++++---------
1 file changed, 37 insertions(+), 10 deletions(-)
diff --git a/drivers/crypto/mxs-dcp.c b/drivers/crypto/mxs-dcp.c
index decaed448ebbb..7483adf120084 100644
--- a/drivers/crypto/mxs-dcp.c
+++ b/drivers/crypto/mxs-dcp.c
@@ -28,9 +28,24 @@
#define DCP_MAX_CHANS 4
#define DCP_BUF_SZ PAGE_SIZE
+#define DCP_SHA_PAY_SZ 64
#define DCP_ALIGNMENT 64
+/*
+ * Null hashes to align with hw behavior on imx6sl and ull
+ * these are flipped for consistency with hw output
+ */
+const uint8_t sha1_null_hash[] =
+ "\x09\x07\xd8\xaf\x90\x18\x60\x95\xef\xbf"
+ "\x55\x32\x0d\x4b\x6b\x5e\xee\xa3\x39\xda";
+
+const uint8_t sha256_null_hash[] =
+ "\x55\xb8\x52\x78\x1b\x99\x95\xa4"
+ "\x4c\x93\x9b\x64\xe4\x41\xae\x27"
+ "\x24\xb9\x6f\x99\xc8\xf4\xfb\x9a"
+ "\x14\x1c\xfc\x98\x42\xc4\xb0\xe3";
+
/* DCP DMA descriptor. */
struct dcp_dma_desc {
uint32_t next_cmd_addr;
@@ -48,6 +63,7 @@ struct dcp_coherent_block {
uint8_t aes_in_buf[DCP_BUF_SZ];
uint8_t aes_out_buf[DCP_BUF_SZ];
uint8_t sha_in_buf[DCP_BUF_SZ];
+ uint8_t sha_out_buf[DCP_SHA_PAY_SZ];
uint8_t aes_key[2 * AES_KEYSIZE_128];
@@ -513,8 +529,6 @@ static int mxs_dcp_run_sha(struct ahash_request *req)
struct crypto_ahash *tfm = crypto_ahash_reqtfm(req);
struct dcp_async_ctx *actx = crypto_ahash_ctx(tfm);
struct dcp_sha_req_ctx *rctx = ahash_request_ctx(req);
- struct hash_alg_common *halg = crypto_hash_alg_common(tfm);
-
struct dcp_dma_desc *desc = &sdcp->coh->desc[actx->chan];
dma_addr_t digest_phys = 0;
@@ -536,10 +550,23 @@ static int mxs_dcp_run_sha(struct ahash_request *req)
desc->payload = 0;
desc->status = 0;
+ /*
+ * Align driver with hw behavior when generating null hashes
+ */
+ if (rctx->init && rctx->fini && desc->size == 0) {
+ struct hash_alg_common *halg = crypto_hash_alg_common(tfm);
+ const uint8_t *sha_buf =
+ (actx->alg == MXS_DCP_CONTROL1_HASH_SELECT_SHA1) ?
+ sha1_null_hash : sha256_null_hash;
+ memcpy(sdcp->coh->sha_out_buf, sha_buf, halg->digestsize);
+ ret = 0;
+ goto done_run;
+ }
+
/* Set HASH_TERM bit for last transfer block. */
if (rctx->fini) {
- digest_phys = dma_map_single(sdcp->dev, req->result,
- halg->digestsize, DMA_FROM_DEVICE);
+ digest_phys = dma_map_single(sdcp->dev, sdcp->coh->sha_out_buf,
+ DCP_SHA_PAY_SZ, DMA_FROM_DEVICE);
desc->control0 |= MXS_DCP_CONTROL0_HASH_TERM;
desc->payload = digest_phys;
}
@@ -547,9 +574,10 @@ static int mxs_dcp_run_sha(struct ahash_request *req)
ret = mxs_dcp_start_dma(actx);
if (rctx->fini)
- dma_unmap_single(sdcp->dev, digest_phys, halg->digestsize,
+ dma_unmap_single(sdcp->dev, digest_phys, DCP_SHA_PAY_SZ,
DMA_FROM_DEVICE);
+done_run:
dma_unmap_single(sdcp->dev, buf_phys, DCP_BUF_SZ, DMA_TO_DEVICE);
return ret;
@@ -567,6 +595,7 @@ static int dcp_sha_req_to_buf(struct crypto_async_request *arq)
const int nents = sg_nents(req->src);
uint8_t *in_buf = sdcp->coh->sha_in_buf;
+ uint8_t *out_buf = sdcp->coh->sha_out_buf;
uint8_t *src_buf;
@@ -621,11 +650,9 @@ static int dcp_sha_req_to_buf(struct crypto_async_request *arq)
actx->fill = 0;
- /* For some reason, the result is flipped. */
- for (i = 0; i < halg->digestsize / 2; i++) {
- swap(req->result[i],
- req->result[halg->digestsize - i - 1]);
- }
+ /* For some reason the result is flipped */
+ for (i = 0; i < halg->digestsize; i++)
+ req->result[i] = out_buf[halg->digestsize - i - 1];
}
return 0;
--
2.20.1
From: Marcel Ziswiler <[email protected]>
[ Upstream commit 564706f65cda3de52b09e51feb423a43940fe661 ]
There was a dot instead of a comma. Fix this.
Signed-off-by: Marcel Ziswiler <[email protected]>
Signed-off-by: Thierry Reding <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm/boot/dts/tegra30.dtsi | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/arch/arm/boot/dts/tegra30.dtsi b/arch/arm/boot/dts/tegra30.dtsi
index 5030065cbdfe3..ad30d2a51af15 100644
--- a/arch/arm/boot/dts/tegra30.dtsi
+++ b/arch/arm/boot/dts/tegra30.dtsi
@@ -823,7 +823,7 @@
nvidia,elastic-limit = <16>;
nvidia,term-range-adj = <6>;
nvidia,xcvr-setup = <51>;
- nvidia.xcvr-setup-use-fuses;
+ nvidia,xcvr-setup-use-fuses;
nvidia,xcvr-lsfslew = <1>;
nvidia,xcvr-lsrslew = <1>;
nvidia,xcvr-hsslew = <32>;
@@ -860,7 +860,7 @@
nvidia,elastic-limit = <16>;
nvidia,term-range-adj = <6>;
nvidia,xcvr-setup = <51>;
- nvidia.xcvr-setup-use-fuses;
+ nvidia,xcvr-setup-use-fuses;
nvidia,xcvr-lsfslew = <2>;
nvidia,xcvr-lsrslew = <2>;
nvidia,xcvr-hsslew = <32>;
@@ -896,7 +896,7 @@
nvidia,elastic-limit = <16>;
nvidia,term-range-adj = <6>;
nvidia,xcvr-setup = <51>;
- nvidia.xcvr-setup-use-fuses;
+ nvidia,xcvr-setup-use-fuses;
nvidia,xcvr-lsfslew = <2>;
nvidia,xcvr-lsrslew = <2>;
nvidia,xcvr-hsslew = <32>;
--
2.20.1
From: Bob Moore <[email protected]>
[ Upstream commit 8b1cafdcb4b75c5027c52f1e82b47ebe727ad7ed ]
These address spaces are defined by the ACPI spec to be
"always available", and thus _REG should never be run on them.
Provides compatibility with other ACPI implementations.
Signed-off-by: Bob Moore <[email protected]>
Signed-off-by: Erik Schmauss <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/acpi/acpica/acevents.h | 2 ++
drivers/acpi/acpica/aclocal.h | 2 +-
drivers/acpi/acpica/evregion.c | 17 +++++++++++++++--
drivers/acpi/acpica/evrgnini.c | 6 +-----
drivers/acpi/acpica/evxfregn.c | 1 -
5 files changed, 19 insertions(+), 9 deletions(-)
diff --git a/drivers/acpi/acpica/acevents.h b/drivers/acpi/acpica/acevents.h
index 92fa47c6498cd..20fd17aaa9189 100644
--- a/drivers/acpi/acpica/acevents.h
+++ b/drivers/acpi/acpica/acevents.h
@@ -247,6 +247,8 @@ acpi_status
acpi_ev_initialize_region(union acpi_operand_object *region_obj,
u8 acpi_ns_locked);
+u8 acpi_ev_is_pci_root_bridge(struct acpi_namespace_node *node);
+
/*
* evsci - SCI (System Control Interrupt) handling/dispatch
*/
diff --git a/drivers/acpi/acpica/aclocal.h b/drivers/acpi/acpica/aclocal.h
index dff1207a60788..219bc576d1270 100644
--- a/drivers/acpi/acpica/aclocal.h
+++ b/drivers/acpi/acpica/aclocal.h
@@ -428,9 +428,9 @@ struct acpi_simple_repair_info {
/* Info for running the _REG methods */
struct acpi_reg_walk_info {
- acpi_adr_space_type space_id;
u32 function;
u32 reg_run_count;
+ acpi_adr_space_type space_id;
};
/*****************************************************************************
diff --git a/drivers/acpi/acpica/evregion.c b/drivers/acpi/acpica/evregion.c
index 4c6f795140402..9cb60fdc77e50 100644
--- a/drivers/acpi/acpica/evregion.c
+++ b/drivers/acpi/acpica/evregion.c
@@ -677,6 +677,19 @@ acpi_ev_execute_reg_methods(struct acpi_namespace_node *node,
ACPI_FUNCTION_TRACE(ev_execute_reg_methods);
+ /*
+ * These address spaces do not need a call to _REG, since the ACPI
+ * specification defines them as: "must always be accessible". Since
+ * they never change state (never become unavailable), no need to ever
+ * call _REG on them. Also, a data_table is not a "real" address space,
+ * so do not call _REG. September 2018.
+ */
+ if ((space_id == ACPI_ADR_SPACE_SYSTEM_MEMORY) ||
+ (space_id == ACPI_ADR_SPACE_SYSTEM_IO) ||
+ (space_id == ACPI_ADR_SPACE_DATA_TABLE)) {
+ return_VOID;
+ }
+
info.space_id = space_id;
info.function = function;
info.reg_run_count = 0;
@@ -738,8 +751,8 @@ acpi_ev_reg_run(acpi_handle obj_handle,
}
/*
- * We only care about regions.and objects that are allowed to have address
- * space handlers
+ * We only care about regions and objects that are allowed to have
+ * address space handlers
*/
if ((node->type != ACPI_TYPE_REGION) && (node != acpi_gbl_root_node)) {
return (AE_OK);
diff --git a/drivers/acpi/acpica/evrgnini.c b/drivers/acpi/acpica/evrgnini.c
index 75ddd160a716f..c8646c3977865 100644
--- a/drivers/acpi/acpica/evrgnini.c
+++ b/drivers/acpi/acpica/evrgnini.c
@@ -50,9 +50,6 @@
#define _COMPONENT ACPI_EVENTS
ACPI_MODULE_NAME("evrgnini")
-/* Local prototypes */
-static u8 acpi_ev_is_pci_root_bridge(struct acpi_namespace_node *node);
-
/*******************************************************************************
*
* FUNCTION: acpi_ev_system_memory_region_setup
@@ -67,7 +64,6 @@ static u8 acpi_ev_is_pci_root_bridge(struct acpi_namespace_node *node);
* DESCRIPTION: Setup a system_memory operation region
*
******************************************************************************/
-
acpi_status
acpi_ev_system_memory_region_setup(acpi_handle handle,
u32 function,
@@ -347,7 +343,7 @@ acpi_ev_pci_config_region_setup(acpi_handle handle,
*
******************************************************************************/
-static u8 acpi_ev_is_pci_root_bridge(struct acpi_namespace_node *node)
+u8 acpi_ev_is_pci_root_bridge(struct acpi_namespace_node *node)
{
acpi_status status;
struct acpi_pnp_device_id *hid;
diff --git a/drivers/acpi/acpica/evxfregn.c b/drivers/acpi/acpica/evxfregn.c
index d2743067126af..f87d59a05c681 100644
--- a/drivers/acpi/acpica/evxfregn.c
+++ b/drivers/acpi/acpica/evxfregn.c
@@ -227,7 +227,6 @@ acpi_remove_address_space_handler(acpi_handle device,
*/
region_obj =
handler_obj->address_space.region_list;
-
}
/* Remove this Handler object from the list */
--
2.20.1
From: Michael Pobega <[email protected]>
[ Upstream commit d153135e93a50cdb6f1b52e238909e9965b56056 ]
The Elo VuPoint 15MX has two headphone jacks of which neither work by
default. Disabling automute allows ALSA to work normally with the
speakers & left headphone jack.
Future pin configuration changes may be required in the future to get
the right headphone jack working in tandem.
Signed-off-by: Michael Pobega <[email protected]>
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/pci/hda/patch_sigmatel.c | 20 ++++++++++++++++++++
1 file changed, 20 insertions(+)
diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c
index 0abab7926dca3..d1a6d20ace0da 100644
--- a/sound/pci/hda/patch_sigmatel.c
+++ b/sound/pci/hda/patch_sigmatel.c
@@ -77,6 +77,7 @@ enum {
STAC_DELL_M6_BOTH,
STAC_DELL_EQ,
STAC_ALIENWARE_M17X,
+ STAC_ELO_VUPOINT_15MX,
STAC_92HD89XX_HP_FRONT_JACK,
STAC_92HD89XX_HP_Z1_G2_RIGHT_MIC_JACK,
STAC_92HD73XX_ASUS_MOBO,
@@ -1875,6 +1876,18 @@ static void stac92hd73xx_fixup_no_jd(struct hda_codec *codec,
codec->no_jack_detect = 1;
}
+
+static void stac92hd73xx_disable_automute(struct hda_codec *codec,
+ const struct hda_fixup *fix, int action)
+{
+ struct sigmatel_spec *spec = codec->spec;
+
+ if (action != HDA_FIXUP_ACT_PRE_PROBE)
+ return;
+
+ spec->gen.suppress_auto_mute = 1;
+}
+
static const struct hda_fixup stac92hd73xx_fixups[] = {
[STAC_92HD73XX_REF] = {
.type = HDA_FIXUP_FUNC,
@@ -1900,6 +1913,10 @@ static const struct hda_fixup stac92hd73xx_fixups[] = {
.type = HDA_FIXUP_FUNC,
.v.func = stac92hd73xx_fixup_alienware_m17x,
},
+ [STAC_ELO_VUPOINT_15MX] = {
+ .type = HDA_FIXUP_FUNC,
+ .v.func = stac92hd73xx_disable_automute,
+ },
[STAC_92HD73XX_INTEL] = {
.type = HDA_FIXUP_PINS,
.v.pins = intel_dg45id_pin_configs,
@@ -1938,6 +1955,7 @@ static const struct hda_model_fixup stac92hd73xx_models[] = {
{ .id = STAC_DELL_M6_BOTH, .name = "dell-m6" },
{ .id = STAC_DELL_EQ, .name = "dell-eq" },
{ .id = STAC_ALIENWARE_M17X, .name = "alienware" },
+ { .id = STAC_ELO_VUPOINT_15MX, .name = "elo-vupoint-15mx" },
{ .id = STAC_92HD73XX_ASUS_MOBO, .name = "asus-mobo" },
{}
};
@@ -1987,6 +2005,8 @@ static const struct snd_pci_quirk stac92hd73xx_fixup_tbl[] = {
"Alienware M17x", STAC_ALIENWARE_M17X),
SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x0490,
"Alienware M17x R3", STAC_DELL_EQ),
+ SND_PCI_QUIRK(0x1059, 0x1011,
+ "ELO VuPoint 15MX", STAC_ELO_VUPOINT_15MX),
SND_PCI_QUIRK(PCI_VENDOR_ID_HP, 0x1927,
"HP Z1 G2", STAC_92HD89XX_HP_Z1_G2_RIGHT_MIC_JACK),
SND_PCI_QUIRK(PCI_VENDOR_ID_HP, 0x2b17,
--
2.20.1
From: Peter Zijlstra <[email protected]>
commit 69d927bba39517d0980462efc051875b7f4db185 upstream.
Recent probing at the Linux Kernel Memory Model uncovered a
'surprise'. Strongly ordered architectures where the atomic RmW
primitive implies full memory ordering and
smp_mb__{before,after}_atomic() are a simple barrier() (such as x86)
fail for:
*x = 1;
atomic_inc(u);
smp_mb__after_atomic();
r0 = *y;
Because, while the atomic_inc() implies memory order, it
(surprisingly) does not provide a compiler barrier. This then allows
the compiler to re-order like so:
atomic_inc(u);
*x = 1;
smp_mb__after_atomic();
r0 = *y;
Which the CPU is then allowed to re-order (under TSO rules) like:
atomic_inc(u);
r0 = *y;
*x = 1;
And this very much was not intended. Therefore strengthen the atomic
RmW ops to include a compiler barrier.
NOTE: atomic_{or,and,xor} and the bitops already had the compiler
barrier.
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Signed-off-by: Ingo Molnar <[email protected]>
Signed-off-by: Jari Ruusu <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/include/asm/atomic.h | 8 ++++----
arch/x86/include/asm/atomic64_64.h | 8 ++++----
arch/x86/include/asm/barrier.h | 4 ++--
3 files changed, 10 insertions(+), 10 deletions(-)
--- a/arch/x86/include/asm/atomic.h
+++ b/arch/x86/include/asm/atomic.h
@@ -49,7 +49,7 @@ static __always_inline void atomic_add(i
{
asm volatile(LOCK_PREFIX "addl %1,%0"
: "+m" (v->counter)
- : "ir" (i));
+ : "ir" (i) : "memory");
}
/**
@@ -63,7 +63,7 @@ static __always_inline void atomic_sub(i
{
asm volatile(LOCK_PREFIX "subl %1,%0"
: "+m" (v->counter)
- : "ir" (i));
+ : "ir" (i) : "memory");
}
/**
@@ -89,7 +89,7 @@ static __always_inline bool atomic_sub_a
static __always_inline void atomic_inc(atomic_t *v)
{
asm volatile(LOCK_PREFIX "incl %0"
- : "+m" (v->counter));
+ : "+m" (v->counter) :: "memory");
}
/**
@@ -101,7 +101,7 @@ static __always_inline void atomic_inc(a
static __always_inline void atomic_dec(atomic_t *v)
{
asm volatile(LOCK_PREFIX "decl %0"
- : "+m" (v->counter));
+ : "+m" (v->counter) :: "memory");
}
/**
--- a/arch/x86/include/asm/atomic64_64.h
+++ b/arch/x86/include/asm/atomic64_64.h
@@ -44,7 +44,7 @@ static __always_inline void atomic64_add
{
asm volatile(LOCK_PREFIX "addq %1,%0"
: "=m" (v->counter)
- : "er" (i), "m" (v->counter));
+ : "er" (i), "m" (v->counter) : "memory");
}
/**
@@ -58,7 +58,7 @@ static inline void atomic64_sub(long i,
{
asm volatile(LOCK_PREFIX "subq %1,%0"
: "=m" (v->counter)
- : "er" (i), "m" (v->counter));
+ : "er" (i), "m" (v->counter) : "memory");
}
/**
@@ -85,7 +85,7 @@ static __always_inline void atomic64_inc
{
asm volatile(LOCK_PREFIX "incq %0"
: "=m" (v->counter)
- : "m" (v->counter));
+ : "m" (v->counter) : "memory");
}
/**
@@ -98,7 +98,7 @@ static __always_inline void atomic64_dec
{
asm volatile(LOCK_PREFIX "decq %0"
: "=m" (v->counter)
- : "m" (v->counter));
+ : "m" (v->counter) : "memory");
}
/**
--- a/arch/x86/include/asm/barrier.h
+++ b/arch/x86/include/asm/barrier.h
@@ -105,8 +105,8 @@ do { \
#endif
/* Atomic operations are already serializing on x86 */
-#define __smp_mb__before_atomic() barrier()
-#define __smp_mb__after_atomic() barrier()
+#define __smp_mb__before_atomic() do { } while (0)
+#define __smp_mb__after_atomic() do { } while (0)
#include <asm-generic/barrier.h>
From: YueHaibing <[email protected]>
[ Upstream commit eddf11e18dff0e8671e06ce54e64cfc843303ab9 ]
The method ndo_start_xmit() is defined as returning an 'netdev_tx_t',
which is a typedef for an enum type, so make sure the implementation in
this driver has returns 'netdev_tx_t' value, and change the function
return type to netdev_tx_t.
Found by coccinelle.
Signed-off-by: YueHaibing <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/openvswitch/vport-internal_dev.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/net/openvswitch/vport-internal_dev.c b/net/openvswitch/vport-internal_dev.c
index e7da29021b38b..c233924825801 100644
--- a/net/openvswitch/vport-internal_dev.c
+++ b/net/openvswitch/vport-internal_dev.c
@@ -44,7 +44,8 @@ static struct internal_dev *internal_dev_priv(struct net_device *netdev)
}
/* Called with rcu_read_lock_bh. */
-static int internal_dev_xmit(struct sk_buff *skb, struct net_device *netdev)
+static netdev_tx_t
+internal_dev_xmit(struct sk_buff *skb, struct net_device *netdev)
{
int len, err;
@@ -63,7 +64,7 @@ static int internal_dev_xmit(struct sk_buff *skb, struct net_device *netdev)
} else {
netdev->stats.tx_errors++;
}
- return 0;
+ return NETDEV_TX_OK;
}
static int internal_dev_open(struct net_device *netdev)
--
2.20.1
From: YueHaibing <[email protected]>
[ Upstream commit a9ca7f17c6d240e269a24cbcd76abf9a940309dd ]
The method ndo_start_xmit() is defined as returning an 'netdev_tx_t',
which is a typedef for an enum type, so make sure the implementation in
this driver has returns 'netdev_tx_t' value, and change the function
return type to netdev_tx_t.
Found by coccinelle.
Signed-off-by: YueHaibing <[email protected]>
Acked-by: Wei Liu <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/xen-netback/interface.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/net/xen-netback/interface.c b/drivers/net/xen-netback/interface.c
index e1f47b6ea3b76..46008f2845502 100644
--- a/drivers/net/xen-netback/interface.c
+++ b/drivers/net/xen-netback/interface.c
@@ -171,7 +171,8 @@ static u16 xenvif_select_queue(struct net_device *dev, struct sk_buff *skb,
return vif->hash.mapping[skb_get_hash_raw(skb) % size];
}
-static int xenvif_start_xmit(struct sk_buff *skb, struct net_device *dev)
+static netdev_tx_t
+xenvif_start_xmit(struct sk_buff *skb, struct net_device *dev)
{
struct xenvif *vif = netdev_priv(dev);
struct xenvif_queue *queue = NULL;
--
2.20.1
From: Florian Fainelli <[email protected]>
[ Upstream commit e1eba2ea54a2de0e4c58d87270d25706bb77b844 ]
ARCH_BCM_63XX which is used by ARM-based DSL SoCs from Broadcom uses the
same controller, make it possible to select the STB driver and update
the Kconfig and help text a bit.
Signed-off-by: Florian Fainelli <[email protected]>
Signed-off-by: Wolfram Sang <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/i2c/busses/Kconfig | 7 ++++---
1 file changed, 4 insertions(+), 3 deletions(-)
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index d252276feadf6..759c621a860a9 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -397,12 +397,13 @@ config I2C_BCM_KONA
If you do not need KONA I2C interface, say N.
config I2C_BRCMSTB
- tristate "BRCM Settop I2C controller"
- depends on ARCH_BRCMSTB || BMIPS_GENERIC || COMPILE_TEST
+ tristate "BRCM Settop/DSL I2C controller"
+ depends on ARCH_BRCMSTB || BMIPS_GENERIC || ARCH_BCM_63XX || \
+ COMPILE_TEST
default y
help
If you say yes to this option, support will be included for the
- I2C interface on the Broadcom Settop SoCs.
+ I2C interface on the Broadcom Settop/DSL SoCs.
If you do not need I2C interface, say N.
--
2.20.1
From: Anshuman Khandual <[email protected]>
[ Upstream commit 77cfe950901e5c13aca2df6437a05f39dd9a929b ]
The dummy node ID is marked into all memory ranges on the system. So the
dummy node really extends the entire memblock.memory. Hence report correct
extent information for the dummy node using memblock range helper functions
instead of the range [0LLU, PFN_PHYS(max_pfn) - 1)].
Fixes: 1a2db30034 ("arm64, numa: Add NUMA support for arm64 platforms")
Acked-by: Punit Agrawal <[email protected]>
Signed-off-by: Anshuman Khandual <[email protected]>
Signed-off-by: Catalin Marinas <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm64/mm/numa.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm64/mm/numa.c b/arch/arm64/mm/numa.c
index 4b32168cf91a0..b1e42bad69ac3 100644
--- a/arch/arm64/mm/numa.c
+++ b/arch/arm64/mm/numa.c
@@ -424,7 +424,7 @@ static int __init dummy_numa_init(void)
if (numa_off)
pr_info("NUMA disabled\n"); /* Forced off on command line. */
pr_info("Faking a node at [mem %#018Lx-%#018Lx]\n",
- 0LLU, PFN_PHYS(max_pfn) - 1);
+ memblock_start_of_DRAM(), memblock_end_of_DRAM() - 1);
for_each_memblock(memory, mblk) {
ret = numa_add_memblk(0, mblk->base, mblk->base + mblk->size);
--
2.20.1
From: Naveen N. Rao <[email protected]>
[ Upstream commit db787af1b8a6b4be428ee2ea7d409dafcaa4a43c ]
When CONFIG_VIRT_CPU_ACCOUNTING_NATIVE is not set, we register the DTL
buffer for a cpu when the associated file under powerpc/dtl in debugfs
is opened. When doing so, we need to set the size of the buffer being
registered in the second u32 word of the buffer. This needs to be in big
endian, but we are not doing the conversion resulting in the below error
showing up in dmesg:
dtl_start: DTL registration for cpu 0 (hw 0) failed with -4
Fix this in the obvious manner.
Fixes: 7c105b63bd98 ("powerpc: Add CONFIG_CPU_LITTLE_ENDIAN kernel config option.")
Signed-off-by: Naveen N. Rao <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/powerpc/platforms/pseries/dtl.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/powerpc/platforms/pseries/dtl.c b/arch/powerpc/platforms/pseries/dtl.c
index 39049e4884fbd..37de83c5ef172 100644
--- a/arch/powerpc/platforms/pseries/dtl.c
+++ b/arch/powerpc/platforms/pseries/dtl.c
@@ -150,7 +150,7 @@ static int dtl_start(struct dtl *dtl)
/* Register our dtl buffer with the hypervisor. The HV expects the
* buffer size to be passed in the second word of the buffer */
- ((u32 *)dtl->buf)[1] = DISPATCH_LOG_BYTES;
+ ((u32 *)dtl->buf)[1] = cpu_to_be32(DISPATCH_LOG_BYTES);
hwcpu = get_hard_smp_processor_id(dtl->cpu);
addr = __pa(dtl->buf);
--
2.20.1
From: Jason Yan <[email protected]>
[ Upstream commit 32c850bf587f993b2620b91e5af8a64a7813f504 ]
If we went into sas_rediscover_dev() the attached_sas_addr was already insured
not to be zero. So it's unnecessary to check if the attached_sas_addr is zero.
And although if the sas address is not changed, we always have to unregister
the old device when we are going to register a new one. We cannot just leave
the device there and bring up the new.
Signed-off-by: Jason Yan <[email protected]>
CC: chenxiang <[email protected]>
CC: John Garry <[email protected]>
CC: Johannes Thumshirn <[email protected]>
CC: Ewan Milne <[email protected]>
CC: Christoph Hellwig <[email protected]>
CC: Tomas Henzl <[email protected]>
CC: Dan Williams <[email protected]>
CC: Hannes Reinecke <[email protected]>
Reviewed-by: Johannes Thumshirn <[email protected]>
Reviewed-by: Hannes Reinecke <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/scsi/libsas/sas_expander.c | 13 +++++--------
1 file changed, 5 insertions(+), 8 deletions(-)
diff --git a/drivers/scsi/libsas/sas_expander.c b/drivers/scsi/libsas/sas_expander.c
index 400eee9d77832..d44f18f773c0f 100644
--- a/drivers/scsi/libsas/sas_expander.c
+++ b/drivers/scsi/libsas/sas_expander.c
@@ -2049,14 +2049,11 @@ static int sas_rediscover_dev(struct domain_device *dev, int phy_id, bool last)
return res;
}
- /* delete the old link */
- if (SAS_ADDR(phy->attached_sas_addr) &&
- SAS_ADDR(sas_addr) != SAS_ADDR(phy->attached_sas_addr)) {
- SAS_DPRINTK("ex %016llx phy 0x%x replace %016llx\n",
- SAS_ADDR(dev->sas_addr), phy_id,
- SAS_ADDR(phy->attached_sas_addr));
- sas_unregister_devs_sas_addr(dev, phy_id, last);
- }
+ /* we always have to delete the old device when we went here */
+ SAS_DPRINTK("ex %016llx phy 0x%x replace %016llx\n",
+ SAS_ADDR(dev->sas_addr), phy_id,
+ SAS_ADDR(phy->attached_sas_addr));
+ sas_unregister_devs_sas_addr(dev, phy_id, last);
return sas_discover_new(dev, phy_id);
}
--
2.20.1
From: Naveen N. Rao <[email protected]>
[ Upstream commit 9258227e9dd1da8feddb07ad9702845546a581c9 ]
When CONFIG_VIRT_CPU_ACCOUNTING_NATIVE is not set, we look up dtl_idx in
the lppaca to determine the number of entries in the buffer. Since
lppaca is in big endian, we need to do an endian conversion before using
this in our calculation to determine the number of entries in the
buffer. Without this, we do not iterate over the existing entries in the
DTL buffer properly.
Fixes: 7c105b63bd98 ("powerpc: Add CONFIG_CPU_LITTLE_ENDIAN kernel config option.")
Signed-off-by: Naveen N. Rao <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/powerpc/platforms/pseries/dtl.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/powerpc/platforms/pseries/dtl.c b/arch/powerpc/platforms/pseries/dtl.c
index 37de83c5ef172..7a4d172c93765 100644
--- a/arch/powerpc/platforms/pseries/dtl.c
+++ b/arch/powerpc/platforms/pseries/dtl.c
@@ -185,7 +185,7 @@ static void dtl_stop(struct dtl *dtl)
static u64 dtl_current_index(struct dtl *dtl)
{
- return lppaca_of(dtl->cpu).dtl_idx;
+ return be64_to_cpu(lppaca_of(dtl->cpu).dtl_idx);
}
#endif /* CONFIG_VIRT_CPU_ACCOUNTING_NATIVE */
--
2.20.1
From: Radoslaw Tyl <[email protected]>
[ Upstream commit 5d826d209164b0752c883607be4cdbbcf7cab494 ]
This patch fix crash when we have restore flow director filters after reset
adapter. In ixgbe_fdir_filter_restore() filter->action is outside of the
rx_ring array, as it has a VF identifier in the upper 32 bits.
Signed-off-by: Radoslaw Tyl <[email protected]>
Tested-by: Andrew Bowers <[email protected]>
Signed-off-by: Jeff Kirsher <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/intel/ixgbe/ixgbe_main.c | 10 ++++++++--
1 file changed, 8 insertions(+), 2 deletions(-)
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
index a5428b6abdac2..8ad20b7852ed7 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
@@ -4804,6 +4804,7 @@ static void ixgbe_fdir_filter_restore(struct ixgbe_adapter *adapter)
struct ixgbe_hw *hw = &adapter->hw;
struct hlist_node *node2;
struct ixgbe_fdir_filter *filter;
+ u64 action;
spin_lock(&adapter->fdir_perfect_lock);
@@ -4812,12 +4813,17 @@ static void ixgbe_fdir_filter_restore(struct ixgbe_adapter *adapter)
hlist_for_each_entry_safe(filter, node2,
&adapter->fdir_filter_list, fdir_node) {
+ action = filter->action;
+ if (action != IXGBE_FDIR_DROP_QUEUE && action != 0)
+ action =
+ (action >> ETHTOOL_RX_FLOW_SPEC_RING_VF_OFF) - 1;
+
ixgbe_fdir_write_perfect_filter_82599(hw,
&filter->filter,
filter->sw_idx,
- (filter->action == IXGBE_FDIR_DROP_QUEUE) ?
+ (action == IXGBE_FDIR_DROP_QUEUE) ?
IXGBE_FDIR_DROP_QUEUE :
- adapter->rx_ring[filter->action]->reg_idx);
+ adapter->rx_ring[action]->reg_idx);
}
spin_unlock(&adapter->fdir_perfect_lock);
--
2.20.1
From: Nathan Chancellor <[email protected]>
[ Upstream commit 44d7f1a77d8c84f8e42789b5475b74ae0e6d4758 ]
Clang warns that the address of a pointer will always evaluated as true
in a boolean context.
drivers/media/platform/pxa_camera.c:2400:17: warning: address of
'pdev->dev.of_node' will always evaluate to 'true'
[-Wpointer-bool-conversion]
if (&pdev->dev.of_node && !pcdev->pdata) {
~~~~~~~~~~^~~~~~~ ~~
1 warning generated.
Judging from the rest of the kernel, it seems like this was an error and
just the value of of_node should be checked rather than the address.
Reported-by: Nick Desaulniers <[email protected]>
Signed-off-by: Nathan Chancellor <[email protected]>
Reviewed-by: Nick Desaulniers <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/media/platform/pxa_camera.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/media/platform/pxa_camera.c b/drivers/media/platform/pxa_camera.c
index 390d708c807a0..3fab9f776afa7 100644
--- a/drivers/media/platform/pxa_camera.c
+++ b/drivers/media/platform/pxa_camera.c
@@ -2334,7 +2334,7 @@ static int pxa_camera_probe(struct platform_device *pdev)
pcdev->res = res;
pcdev->pdata = pdev->dev.platform_data;
- if (&pdev->dev.of_node && !pcdev->pdata) {
+ if (pdev->dev.of_node && !pcdev->pdata) {
err = pxa_camera_pdata_from_dt(&pdev->dev, pcdev, &pcdev->asd);
} else {
pcdev->platform_flags = pcdev->pdata->flags;
--
2.20.1
From: Felix Fietkau <[email protected]>
[ Upstream commit 80df9be67c44cb636bbc92caeddad8caf334c53c ]
Fixes a harmless underflow issue when CCK rates are actively being used
Signed-off-by: Felix Fietkau <[email protected]>
Signed-off-by: Johannes Berg <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/mac80211/rc80211_minstrel_ht.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/net/mac80211/rc80211_minstrel_ht.c b/net/mac80211/rc80211_minstrel_ht.c
index 30fbabf4bcbc1..593184d14b3ef 100644
--- a/net/mac80211/rc80211_minstrel_ht.c
+++ b/net/mac80211/rc80211_minstrel_ht.c
@@ -128,7 +128,7 @@
#define CCK_GROUP \
[MINSTREL_CCK_GROUP] = { \
- .streams = 0, \
+ .streams = 1, \
.flags = 0, \
.duration = { \
CCK_DURATION_LIST(false), \
--
2.20.1
From: Borislav Petkov <[email protected]>
[ Upstream commit d0e7d14455d41163126afecd0fcce935463cc512 ]
When booting with "nosmt=force" a message is issued into dmesg to
confirm that SMT has been force-disabled but such a message is not
issued when only "nosmt" is on the kernel command line.
Fix that.
Signed-off-by: Borislav Petkov <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Ingo Molnar <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
kernel/cpu.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/kernel/cpu.c b/kernel/cpu.c
index 0ed3e9deda306..c2573e858009b 100644
--- a/kernel/cpu.c
+++ b/kernel/cpu.c
@@ -379,6 +379,7 @@ void __init cpu_smt_disable(bool force)
pr_info("SMT: Force disabled\n");
cpu_smt_control = CPU_SMT_FORCE_DISABLED;
} else {
+ pr_info("SMT: disabled\n");
cpu_smt_control = CPU_SMT_DISABLED;
}
}
--
2.20.1
From: Dan Carpenter <[email protected]>
[ Upstream commit 185647813cac080453cb73a2e034a8821049f2a7 ]
"out_buf_sz" needs to be signed for the error handling to work.
Signed-off-by: Dan Carpenter <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
samples/mei/mei-amt-version.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/samples/mei/mei-amt-version.c b/samples/mei/mei-amt-version.c
index bb9988914a563..32234481ad7db 100644
--- a/samples/mei/mei-amt-version.c
+++ b/samples/mei/mei-amt-version.c
@@ -370,7 +370,7 @@ static uint32_t amt_host_if_call(struct amt_host_if *acmd,
unsigned int expected_sz)
{
uint32_t in_buf_sz;
- uint32_t out_buf_sz;
+ ssize_t out_buf_sz;
ssize_t written;
uint32_t status;
struct amt_host_if_resp_header *msg_hdr;
--
2.20.1
From: Chung-Hsien Hsu <[email protected]>
[ Upstream commit edb6d6885bef82d1eac432dbeca9fbf4ec349d7e ]
Finding a common channel to send an action frame out is required for
some action types. Since a loop with several scan retry is used to find
the channel, a short wait time could be considered for each attempt.
This patch reduces the wait time from 1500 to 450 msec for each action
frame scan.
This patch fixes the WFA p2p certification 5.1.20 failure caused by the
long action frame send time.
Signed-off-by: Chung-Hsien Hsu <[email protected]>
Signed-off-by: Chi-Hsien Lin <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/broadcom/brcm80211/brcmfmac/p2p.c | 9 ++++-----
1 file changed, 4 insertions(+), 5 deletions(-)
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/p2p.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/p2p.c
index f78d91b692871..c91f5ef0be7c3 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/p2p.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/p2p.c
@@ -74,7 +74,7 @@
#define P2P_AF_MAX_WAIT_TIME msecs_to_jiffies(2000)
#define P2P_INVALID_CHANNEL -1
#define P2P_CHANNEL_SYNC_RETRY 5
-#define P2P_AF_FRM_SCAN_MAX_WAIT msecs_to_jiffies(1500)
+#define P2P_AF_FRM_SCAN_MAX_WAIT msecs_to_jiffies(450)
#define P2P_DEFAULT_SLEEP_TIME_VSDB 200
/* WiFi P2P Public Action Frame OUI Subtypes */
@@ -1139,7 +1139,6 @@ static s32 brcmf_p2p_af_searching_channel(struct brcmf_p2p_info *p2p)
{
struct afx_hdl *afx_hdl = &p2p->afx_hdl;
struct brcmf_cfg80211_vif *pri_vif;
- unsigned long duration;
s32 retry;
brcmf_dbg(TRACE, "Enter\n");
@@ -1155,7 +1154,6 @@ static s32 brcmf_p2p_af_searching_channel(struct brcmf_p2p_info *p2p)
* pending action frame tx is cancelled.
*/
retry = 0;
- duration = msecs_to_jiffies(P2P_AF_FRM_SCAN_MAX_WAIT);
while ((retry < P2P_CHANNEL_SYNC_RETRY) &&
(afx_hdl->peer_chan == P2P_INVALID_CHANNEL)) {
afx_hdl->is_listen = false;
@@ -1163,7 +1161,8 @@ static s32 brcmf_p2p_af_searching_channel(struct brcmf_p2p_info *p2p)
retry);
/* search peer on peer's listen channel */
schedule_work(&afx_hdl->afx_work);
- wait_for_completion_timeout(&afx_hdl->act_frm_scan, duration);
+ wait_for_completion_timeout(&afx_hdl->act_frm_scan,
+ P2P_AF_FRM_SCAN_MAX_WAIT);
if ((afx_hdl->peer_chan != P2P_INVALID_CHANNEL) ||
(!test_bit(BRCMF_P2P_STATUS_FINDING_COMMON_CHANNEL,
&p2p->status)))
@@ -1176,7 +1175,7 @@ static s32 brcmf_p2p_af_searching_channel(struct brcmf_p2p_info *p2p)
afx_hdl->is_listen = true;
schedule_work(&afx_hdl->afx_work);
wait_for_completion_timeout(&afx_hdl->act_frm_scan,
- duration);
+ P2P_AF_FRM_SCAN_MAX_WAIT);
}
if ((afx_hdl->peer_chan != P2P_INVALID_CHANNEL) ||
(!test_bit(BRCMF_P2P_STATUS_FINDING_COMMON_CHANNEL,
--
2.20.1
From: Martin Kepplinger <[email protected]>
[ Upstream commit 20bbb312079494a406c10c90932e3c80837c9d94 ]
This is how userspace checks for touchscreen devices most reliably.
Signed-off-by: Martin Kepplinger <[email protected]>
Signed-off-by: Dmitry Torokhov <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/input/touchscreen/st1232.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/input/touchscreen/st1232.c b/drivers/input/touchscreen/st1232.c
index e943678ce54cd..f1c574d6be17f 100644
--- a/drivers/input/touchscreen/st1232.c
+++ b/drivers/input/touchscreen/st1232.c
@@ -203,6 +203,7 @@ static int st1232_ts_probe(struct i2c_client *client,
input_dev->id.bustype = BUS_I2C;
input_dev->dev.parent = &client->dev;
+ __set_bit(INPUT_PROP_DIRECT, input_dev->propbit);
__set_bit(EV_SYN, input_dev->evbit);
__set_bit(EV_KEY, input_dev->evbit);
__set_bit(EV_ABS, input_dev->evbit);
--
2.20.1
From: Tim Smith <[email protected]>
[ Upstream commit 1eb8d7387908022951792a46fa040ad3942b3b08 ]
Flushing the workqueue can cause operations to happen which might
call gfs2_log_reserve(), or get stuck waiting for locks taken by such
operations. gfs2_log_reserve() can io_schedule(). If this happens, it
will never wake because the only thing which can wake it is gfs2_logd()
which was already stopped.
This causes umount of a gfs2 filesystem to wedge permanently if, for
example, the umount immediately follows a large delete operation.
When this occured, the following stack trace was obtained from the
umount command
[<ffffffff81087968>] flush_workqueue+0x1c8/0x520
[<ffffffffa0666e29>] gfs2_make_fs_ro+0x69/0x160 [gfs2]
[<ffffffffa0667279>] gfs2_put_super+0xa9/0x1c0 [gfs2]
[<ffffffff811b7edf>] generic_shutdown_super+0x6f/0x100
[<ffffffff811b7ff7>] kill_block_super+0x27/0x70
[<ffffffffa0656a71>] gfs2_kill_sb+0x71/0x80 [gfs2]
[<ffffffff811b792b>] deactivate_locked_super+0x3b/0x70
[<ffffffff811b79b9>] deactivate_super+0x59/0x60
[<ffffffff811d2998>] cleanup_mnt+0x58/0x80
[<ffffffff811d2a12>] __cleanup_mnt+0x12/0x20
[<ffffffff8108c87d>] task_work_run+0x7d/0xa0
[<ffffffff8106d7d9>] exit_to_usermode_loop+0x73/0x98
[<ffffffff81003961>] syscall_return_slowpath+0x41/0x50
[<ffffffff815a594c>] int_ret_from_sys_call+0x25/0x8f
[<ffffffffffffffff>] 0xffffffffffffffff
Signed-off-by: Tim Smith <[email protected]>
Signed-off-by: Mark Syms <[email protected]>
Signed-off-by: Bob Peterson <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/gfs2/super.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/fs/gfs2/super.c b/fs/gfs2/super.c
index e3ee387a6dfeb..37496d83661a7 100644
--- a/fs/gfs2/super.c
+++ b/fs/gfs2/super.c
@@ -844,10 +844,10 @@ static int gfs2_make_fs_ro(struct gfs2_sbd *sdp)
if (error && !test_bit(SDF_SHUTDOWN, &sdp->sd_flags))
return error;
+ flush_workqueue(gfs2_delete_workqueue);
kthread_stop(sdp->sd_quotad_process);
kthread_stop(sdp->sd_logd_process);
- flush_workqueue(gfs2_delete_workqueue);
gfs2_quota_sync(sdp->sd_vfs, 0);
gfs2_statfs_sync(sdp->sd_vfs, 0);
--
2.20.1
From: Wenwen Wang <[email protected]>
[ Upstream commit a26ac6c1bed951b2066cc4b2257facd919e35c0b ]
In isif_probe(), there is a while loop to get the ISIF base address and
linearization table0 and table1 address. In the loop body, the function
platform_get_resource() is called to get the resource. If
platform_get_resource() returns NULL, the loop is terminated and the
execution goes to 'fail_nobase_res'. Suppose the loop is terminated at the
first iteration because platform_get_resource() returns NULL and the
execution goes to 'fail_nobase_res'. Given that there is another while loop
at 'fail_nobase_res' and i equals to 0, one iteration of the second while
loop will be executed. However, the second while loop does not check the
return value of platform_get_resource(). This can cause a NULL pointer
dereference bug if the return value is a NULL pointer.
This patch avoids the above issue by adding a check in the second while
loop after the call to platform_get_resource().
Signed-off-by: Wenwen Wang <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/media/platform/davinci/isif.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/media/platform/davinci/isif.c b/drivers/media/platform/davinci/isif.c
index 99faea2e84c6b..78e37cf3470f2 100644
--- a/drivers/media/platform/davinci/isif.c
+++ b/drivers/media/platform/davinci/isif.c
@@ -1106,7 +1106,8 @@ static int isif_probe(struct platform_device *pdev)
while (i >= 0) {
res = platform_get_resource(pdev, IORESOURCE_MEM, i);
- release_mem_region(res->start, resource_size(res));
+ if (res)
+ release_mem_region(res->start, resource_size(res));
i--;
}
vpfe_unregister_ccdc_device(&isif_hw_dev);
--
2.20.1
From: Nathan Chancellor <[email protected]>
[ Upstream commit 3b0b8f0d9a259f6a428af63e7a77547325f8e081 ]
Clang warns when one enumerated type is implicitly converted to another.
drivers/net/ethernet/chelsio/cxgb4/cxgb4_dcb.c:303:7: warning: implicit
conversion from enumeration type 'enum cxgb4_dcb_state' to different
enumeration type 'enum cxgb4_dcb_state_input' [-Wenum-conversion]
? CXGB4_DCB_STATE_FW_ALLSYNCED
^~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/net/ethernet/chelsio/cxgb4/cxgb4_dcb.c:304:7: warning: implicit
conversion from enumeration type 'enum cxgb4_dcb_state' to different
enumeration type 'enum cxgb4_dcb_state_input' [-Wenum-conversion]
: CXGB4_DCB_STATE_FW_INCOMPLETE);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
2 warnings generated.
Use the equivalent value of the expected type to silence Clang while
resulting in no functional change.
CXGB4_DCB_STATE_FW_INCOMPLETE = CXGB4_DCB_INPUT_FW_INCOMPLETE = 2
CXGB4_DCB_STATE_FW_ALLSYNCED = CXGB4_DCB_INPUT_FW_ALLSYNCED = 3
Signed-off-by: Nathan Chancellor <[email protected]>
Reviewed-by: Nick Desaulniers <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/chelsio/cxgb4/cxgb4_dcb.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_dcb.c b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_dcb.c
index 6ee2ed30626bf..306b4b3206168 100644
--- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_dcb.c
+++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_dcb.c
@@ -266,8 +266,8 @@ void cxgb4_dcb_handle_fw_update(struct adapter *adap,
enum cxgb4_dcb_state_input input =
((pcmd->u.dcb.control.all_syncd_pkd &
FW_PORT_CMD_ALL_SYNCD_F)
- ? CXGB4_DCB_STATE_FW_ALLSYNCED
- : CXGB4_DCB_STATE_FW_INCOMPLETE);
+ ? CXGB4_DCB_INPUT_FW_ALLSYNCED
+ : CXGB4_DCB_INPUT_FW_INCOMPLETE);
if (dcb->dcb_version != FW_PORT_DCB_VER_UNKNOWN) {
dcb_running_version = FW_PORT_CMD_DCB_VERSION_G(
--
2.20.1
From: Nathan Chancellor <[email protected]>
[ Upstream commit 258b6d141878530ba1f8fc44db683822389de914 ]
Clang warns when one enumerated type is implicitly converted to another.
drivers/net/ethernet/chelsio/cxgb4/cxgb4_dcb.c:390:4: warning: implicit
conversion from enumeration type 'enum cxgb4_dcb_state' to different
enumeration type 'enum cxgb4_dcb_state_input' [-Wenum-conversion]
IEEE_FAUX_SYNC(dev, dcb);
^~~~~~~~~~~~~~~~~~~~~~~~
drivers/net/ethernet/chelsio/cxgb4/cxgb4_dcb.h:70:10: note: expanded
from macro 'IEEE_FAUX_SYNC'
CXGB4_DCB_STATE_FW_ALLSYNCED);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~
Use the equivalent value of the expected type to silence Clang while
resulting in no functional change.
CXGB4_DCB_STATE_FW_ALLSYNCED = CXGB4_DCB_INPUT_FW_ALLSYNCED = 3
Signed-off-by: Nathan Chancellor <[email protected]>
Reviewed-by: Nick Desaulniers <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/chelsio/cxgb4/cxgb4_dcb.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_dcb.h b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_dcb.h
index ccf24d3dc9824..2c418c405c508 100644
--- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_dcb.h
+++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_dcb.h
@@ -67,7 +67,7 @@
do { \
if ((__dcb)->dcb_version == FW_PORT_DCB_VER_IEEE) \
cxgb4_dcb_state_fsm((__dev), \
- CXGB4_DCB_STATE_FW_ALLSYNCED); \
+ CXGB4_DCB_INPUT_FW_ALLSYNCED); \
} while (0)
/* States we can be in for a port's Data Center Bridging.
--
2.20.1
From: Huibin Hong <[email protected]>
[ Upstream commit dd8fd2cbc73f8650f651da71fc61a6e4f30c1566 ]
The rxconf and txconf structs are allocated on the
stack, so make sure we zero them before filling out
the relevant fields.
Signed-off-by: Huibin Hong <[email protected]>
Signed-off-by: Emil Renner Berthing <[email protected]>
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/spi/spi-rockchip.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/spi/spi-rockchip.c b/drivers/spi/spi-rockchip.c
index 0f89c2169c244..3a94f465e8e05 100644
--- a/drivers/spi/spi-rockchip.c
+++ b/drivers/spi/spi-rockchip.c
@@ -443,6 +443,9 @@ static int rockchip_spi_prepare_dma(struct rockchip_spi *rs)
struct dma_slave_config rxconf, txconf;
struct dma_async_tx_descriptor *rxdesc, *txdesc;
+ memset(&rxconf, 0, sizeof(rxconf));
+ memset(&txconf, 0, sizeof(txconf));
+
spin_lock_irqsave(&rs->lock, flags);
rs->state &= ~RXBUSY;
rs->state &= ~TXBUSY;
--
2.20.1
From: Pavel Tatashin <[email protected]>
commit 94bb804e1e6f0a9a77acf20d7c70ea141c6c821e upstream.
A number of our uaccess routines ('__arch_clear_user()' and
'__arch_copy_{in,from,to}_user()') fail to re-enable PAN if they
encounter an unhandled fault whilst accessing userspace.
For CPUs implementing both hardware PAN and UAO, this bug has no effect
when both extensions are in use by the kernel.
For CPUs implementing hardware PAN but not UAO, this means that a kernel
using hardware PAN may execute portions of code with PAN inadvertently
disabled, opening us up to potential security vulnerabilities that rely
on userspace access from within the kernel which would usually be
prevented by this mechanism. In other words, parts of the kernel run the
same way as they would on a CPU without PAN implemented/emulated at all.
For CPUs not implementing hardware PAN and instead relying on software
emulation via 'CONFIG_ARM64_SW_TTBR0_PAN=y', the impact is unfortunately
much worse. Calling 'schedule()' with software PAN disabled means that
the next task will execute in the kernel using the page-table and ASID
of the previous process even after 'switch_mm()', since the actual
hardware switch is deferred until return to userspace. At this point, or
if there is a intermediate call to 'uaccess_enable()', the page-table
and ASID of the new process are installed. Sadly, due to the changes
introduced by KPTI, this is not an atomic operation and there is a very
small window (two instructions) where the CPU is configured with the
page-table of the old task and the ASID of the new task; a speculative
access in this state is disastrous because it would corrupt the TLB
entries for the new task with mappings from the previous address space.
As Pavel explains:
| I was able to reproduce memory corruption problem on Broadcom's SoC
| ARMv8-A like this:
|
| Enable software perf-events with PERF_SAMPLE_CALLCHAIN so userland's
| stack is accessed and copied.
|
| The test program performed the following on every CPU and forking
| many processes:
|
| unsigned long *map = mmap(NULL, PAGE_SIZE, PROT_READ|PROT_WRITE,
| MAP_SHARED | MAP_ANONYMOUS, -1, 0);
| map[0] = getpid();
| sched_yield();
| if (map[0] != getpid()) {
| fprintf(stderr, "Corruption detected!");
| }
| munmap(map, PAGE_SIZE);
|
| From time to time I was getting map[0] to contain pid for a
| different process.
Ensure that PAN is re-enabled when returning after an unhandled user
fault from our uaccess routines.
Cc: Catalin Marinas <[email protected]>
Reviewed-by: Mark Rutland <[email protected]>
Tested-by: Mark Rutland <[email protected]>
Cc: <[email protected]>
Fixes: 338d4f49d6f7 ("arm64: kernel: Add support for Privileged Access Never")
Signed-off-by: Pavel Tatashin <[email protected]>
[will: rewrote commit message]
[will: backport for 4.9.y stable kernels]
Signed-off-by: Will Deacon <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/arm64/lib/clear_user.S | 2 ++
arch/arm64/lib/copy_from_user.S | 2 ++
arch/arm64/lib/copy_in_user.S | 2 ++
arch/arm64/lib/copy_to_user.S | 2 ++
4 files changed, 8 insertions(+)
--- a/arch/arm64/lib/clear_user.S
+++ b/arch/arm64/lib/clear_user.S
@@ -62,5 +62,7 @@ ENDPROC(__arch_clear_user)
.section .fixup,"ax"
.align 2
9: mov x0, x2 // return the original size
+ALTERNATIVE("nop", __stringify(SET_PSTATE_PAN(1)), ARM64_ALT_PAN_NOT_UAO, \
+ CONFIG_ARM64_PAN)
ret
.previous
--- a/arch/arm64/lib/copy_from_user.S
+++ b/arch/arm64/lib/copy_from_user.S
@@ -80,5 +80,7 @@ ENDPROC(__arch_copy_from_user)
.section .fixup,"ax"
.align 2
9998: sub x0, end, dst // bytes not copied
+ALTERNATIVE("nop", __stringify(SET_PSTATE_PAN(1)), ARM64_ALT_PAN_NOT_UAO, \
+ CONFIG_ARM64_PAN)
ret
.previous
--- a/arch/arm64/lib/copy_in_user.S
+++ b/arch/arm64/lib/copy_in_user.S
@@ -81,5 +81,7 @@ ENDPROC(__arch_copy_in_user)
.section .fixup,"ax"
.align 2
9998: sub x0, end, dst // bytes not copied
+ALTERNATIVE("nop", __stringify(SET_PSTATE_PAN(1)), ARM64_ALT_PAN_NOT_UAO, \
+ CONFIG_ARM64_PAN)
ret
.previous
--- a/arch/arm64/lib/copy_to_user.S
+++ b/arch/arm64/lib/copy_to_user.S
@@ -79,5 +79,7 @@ ENDPROC(__arch_copy_to_user)
.section .fixup,"ax"
.align 2
9998: sub x0, end, dst // bytes not copied
+ALTERNATIVE("nop", __stringify(SET_PSTATE_PAN(1)), ARM64_ALT_PAN_NOT_UAO, \
+ CONFIG_ARM64_PAN)
ret
.previous
From: Trent Piepho <[email protected]>
[ Upstream commit 605b3bec73cbd74b4ac937b580cd0b47d1300484 ]
spidev will make a big fuss if a device tree node binds a device by
using "spidev" as the node's compatible property.
However, the logic for this isn't looking for "spidev" in the
compatible, but rather checking that the device is NOT compatible with
spidev's list of devices.
This causes a false positive if a device not named "rohm,dh2228fv", etc.
binds to spidev, even if a means other than putting "spidev" in the
device tree was used. E.g., the sysfs driver_override attribute.
Signed-off-by: Trent Piepho <[email protected]>
Reviewed-by: Jan Kundrát <[email protected]>
Tested-by: Jan Kundrát <[email protected]>
Reviewed-by: Geert Uytterhoeven <[email protected]>
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/spi/spidev.c | 8 +++-----
1 file changed, 3 insertions(+), 5 deletions(-)
diff --git a/drivers/spi/spidev.c b/drivers/spi/spidev.c
index 2e05046f866bd..f4ea286b0121e 100644
--- a/drivers/spi/spidev.c
+++ b/drivers/spi/spidev.c
@@ -751,11 +751,9 @@ static int spidev_probe(struct spi_device *spi)
* compatible string, it is a Linux implementation thing
* rather than a description of the hardware.
*/
- if (spi->dev.of_node && !of_match_device(spidev_dt_ids, &spi->dev)) {
- dev_err(&spi->dev, "buggy DT: spidev listed directly in DT\n");
- WARN_ON(spi->dev.of_node &&
- !of_match_device(spidev_dt_ids, &spi->dev));
- }
+ WARN(spi->dev.of_node &&
+ of_device_is_compatible(spi->dev.of_node, "spidev"),
+ "%pOF: buggy DT: spidev listed directly in DT\n", spi->dev.of_node);
spidev_probe_acpi(spi);
--
2.20.1
From: zhong jiang <[email protected]>
[ Upstream commit 3dac3583bf1a61db6aaf31dfd752c677a4400afd ]
It is not safe to dereference an object before a null test. It is
not needed and just remove them. Ftrace can be used instead.
Signed-off-by: zhong jiang <[email protected]>
Acked-by: Andrew Donnellan <[email protected]>
Acked-by: Frederic Barrat <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/misc/cxl/guest.c | 2 --
1 file changed, 2 deletions(-)
diff --git a/drivers/misc/cxl/guest.c b/drivers/misc/cxl/guest.c
index 3e102cd6ed914..d08509cd978a4 100644
--- a/drivers/misc/cxl/guest.c
+++ b/drivers/misc/cxl/guest.c
@@ -1026,8 +1026,6 @@ int cxl_guest_init_afu(struct cxl *adapter, int slice, struct device_node *afu_n
void cxl_guest_remove_afu(struct cxl_afu *afu)
{
- pr_devel("in %s - AFU(%d)\n", __func__, afu->slice);
-
if (!afu)
return;
--
2.20.1
From: Nicolin Chen <[email protected]>
[ Upstream commit 791ebc9d34e9d212fc03742c31654b017d385926 ]
The three INA3221_CONFIG_MODE macros are not correctly defined here.
The MODE3-1 bits are located at BIT 2-0 according to the datasheet.
So this patch just fixes them by shifting all of them with a correct
offset. However, this isn't a crital bug fix as the driver does not
use any of them at this point.
Signed-off-by: Nicolin Chen <[email protected]>
Signed-off-by: Guenter Roeck <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/hwmon/ina3221.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/hwmon/ina3221.c b/drivers/hwmon/ina3221.c
index e6b49500c52ae..8c9555313fc3d 100644
--- a/drivers/hwmon/ina3221.c
+++ b/drivers/hwmon/ina3221.c
@@ -38,9 +38,9 @@
#define INA3221_WARN3 0x0c
#define INA3221_MASK_ENABLE 0x0f
-#define INA3221_CONFIG_MODE_SHUNT BIT(1)
-#define INA3221_CONFIG_MODE_BUS BIT(2)
-#define INA3221_CONFIG_MODE_CONTINUOUS BIT(3)
+#define INA3221_CONFIG_MODE_SHUNT BIT(0)
+#define INA3221_CONFIG_MODE_BUS BIT(1)
+#define INA3221_CONFIG_MODE_CONTINUOUS BIT(2)
#define INA3221_RSHUNT_DEFAULT 10000
--
2.20.1
From: Colin Ian King <[email protected]>
[ Upstream commit 2978d873471005577e7b68a528b4f256a529b030 ]
Currently accessing various /sys/fs/orangefs files will spam the
kernel log with the following info message when the client is not
running:
[ 491.489284] sysfs_service_op_show: Client not running :-5:
Rate limit this info message to make it less spammy.
Signed-off-by: Colin Ian King <[email protected]>
Signed-off-by: Mike Marshall <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/orangefs/orangefs-sysfs.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/fs/orangefs/orangefs-sysfs.c b/fs/orangefs/orangefs-sysfs.c
index a799546a67f77..f6172c3f83ba0 100644
--- a/fs/orangefs/orangefs-sysfs.c
+++ b/fs/orangefs/orangefs-sysfs.c
@@ -315,7 +315,7 @@ static ssize_t sysfs_service_op_show(struct kobject *kobj,
/* Can't do a service_operation if the client is not running... */
rc = is_daemon_in_service();
if (rc) {
- pr_info("%s: Client not running :%d:\n",
+ pr_info_ratelimited("%s: Client not running :%d:\n",
__func__,
is_daemon_in_service());
goto out;
--
2.20.1
From: Nathan Chancellor <[email protected]>
[ Upstream commit 5e621f5d538985f010035c6f3e28c22829d36db1 ]
Clang warns when implicitly converting from one enumerated type to
another. Avoid this by using the equivalent value from the expected
type.
drivers/dma/timb_dma.c:548:27: warning: implicit conversion from
enumeration type 'enum dma_transfer_direction' to different enumeration
type 'enum dma_data_direction' [-Wenum-conversion]
td_desc->desc_list_len, DMA_MEM_TO_DEV);
^~~~~~~~~~~~~~
1 warning generated.
Reported-by: Nick Desaulniers <[email protected]>
Signed-off-by: Nathan Chancellor <[email protected]>
Reviewed-by: Nick Desaulniers <[email protected]>
Signed-off-by: Vinod Koul <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/dma/timb_dma.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/dma/timb_dma.c b/drivers/dma/timb_dma.c
index 896bafb7a5324..cf6588cc3efdc 100644
--- a/drivers/dma/timb_dma.c
+++ b/drivers/dma/timb_dma.c
@@ -545,7 +545,7 @@ static struct dma_async_tx_descriptor *td_prep_slave_sg(struct dma_chan *chan,
}
dma_sync_single_for_device(chan2dmadev(chan), td_desc->txd.phys,
- td_desc->desc_list_len, DMA_MEM_TO_DEV);
+ td_desc->desc_list_len, DMA_TO_DEVICE);
return &td_desc->txd;
}
--
2.20.1
From: Borislav Petkov <[email protected]>
[ Upstream commit cf089611f4c446285046fcd426d90c18f37d2905 ]
Lianbo reported a build error with a particular 32-bit config, see Link
below for details.
Provide a weak copy_oldmem_page_encrypted() function which architectures
can override, in the same manner other functionality in that file is
supplied.
Reported-by: Lianbo Jiang <[email protected]>
Signed-off-by: Borislav Petkov <[email protected]>
CC: [email protected]
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
fs/proc/vmcore.c | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/fs/proc/vmcore.c b/fs/proc/vmcore.c
index 8ab782d8b33dd..93d13f4010c14 100644
--- a/fs/proc/vmcore.c
+++ b/fs/proc/vmcore.c
@@ -164,6 +164,16 @@ int __weak remap_oldmem_pfn_range(struct vm_area_struct *vma,
return remap_pfn_range(vma, from, pfn, size, prot);
}
+/*
+ * Architectures which support memory encryption override this.
+ */
+ssize_t __weak
+copy_oldmem_page_encrypted(unsigned long pfn, char *buf, size_t csize,
+ unsigned long offset, int userbuf)
+{
+ return copy_oldmem_page(pfn, buf, csize, offset, userbuf);
+}
+
/*
* Copy to either kernel or user space
*/
--
2.20.1
From: He Zhe <[email protected]>
[ Upstream commit e6fe3e5b7d16e8f146a4ae7fe481bc6e97acde1e ]
The current printk() is ready to handle log buffer size up to 2G.
Give an explicit error for users who want to use larger log buffer.
Also fix printk formatting to show the 2G as a positive number.
Link: http://lkml.kernel.org/r/[email protected]
Cc: [email protected]
Cc: [email protected]
Suggested-by: Sergey Senozhatsky <[email protected]>
Signed-off-by: He Zhe <[email protected]>
Reviewed-by: Sergey Senozhatsky <[email protected]>
[pmladek: Fixed to the really safe limit 2GB.]
Signed-off-by: Petr Mladek <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
kernel/printk/printk.c | 18 ++++++++++++------
1 file changed, 12 insertions(+), 6 deletions(-)
diff --git a/kernel/printk/printk.c b/kernel/printk/printk.c
index 6607d77afe55a..a0339c458c140 100644
--- a/kernel/printk/printk.c
+++ b/kernel/printk/printk.c
@@ -383,6 +383,7 @@ static u32 clear_idx;
/* record buffer */
#define LOG_ALIGN __alignof__(struct printk_log)
#define __LOG_BUF_LEN (1 << CONFIG_LOG_BUF_SHIFT)
+#define LOG_BUF_LEN_MAX (u32)(1 << 31)
static char __log_buf[__LOG_BUF_LEN] __aligned(LOG_ALIGN);
static char *log_buf = __log_buf;
static u32 log_buf_len = __LOG_BUF_LEN;
@@ -983,18 +984,23 @@ void log_buf_kexec_setup(void)
static unsigned long __initdata new_log_buf_len;
/* we practice scaling the ring buffer by powers of 2 */
-static void __init log_buf_len_update(unsigned size)
+static void __init log_buf_len_update(u64 size)
{
+ if (size > (u64)LOG_BUF_LEN_MAX) {
+ size = (u64)LOG_BUF_LEN_MAX;
+ pr_err("log_buf over 2G is not supported.\n");
+ }
+
if (size)
size = roundup_pow_of_two(size);
if (size > log_buf_len)
- new_log_buf_len = size;
+ new_log_buf_len = (unsigned long)size;
}
/* save requested log_buf_len since it's too early to process it */
static int __init log_buf_len_setup(char *str)
{
- unsigned int size;
+ u64 size;
if (!str)
return -EINVAL;
@@ -1064,7 +1070,7 @@ void __init setup_log_buf(int early)
}
if (unlikely(!new_log_buf)) {
- pr_err("log_buf_len: %ld bytes not available\n",
+ pr_err("log_buf_len: %lu bytes not available\n",
new_log_buf_len);
return;
}
@@ -1077,8 +1083,8 @@ void __init setup_log_buf(int early)
memcpy(log_buf, __log_buf, __LOG_BUF_LEN);
raw_spin_unlock_irqrestore(&logbuf_lock, flags);
- pr_info("log_buf_len: %d bytes\n", log_buf_len);
- pr_info("early log buf free: %d(%d%%)\n",
+ pr_info("log_buf_len: %u bytes\n", log_buf_len);
+ pr_info("early log buf free: %u(%u%%)\n",
free, (free * 100) / __LOG_BUF_LEN);
}
--
2.20.1
From: Vignesh R <[email protected]>
[ Upstream commit c974ac771479327b5424f60d58845e31daddadea ]
If a child device like touchscreen is wakeup capable, then keep ADC
interface on, so that a touching resistive screen will generate wakeup
event to the system.
Signed-off-by: Vignesh R <[email protected]>
Signed-off-by: Lee Jones <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/mfd/ti_am335x_tscadc.c | 13 +++++++++++++
1 file changed, 13 insertions(+)
diff --git a/drivers/mfd/ti_am335x_tscadc.c b/drivers/mfd/ti_am335x_tscadc.c
index 60286adbd6a1c..e56f0844b98de 100644
--- a/drivers/mfd/ti_am335x_tscadc.c
+++ b/drivers/mfd/ti_am335x_tscadc.c
@@ -295,11 +295,24 @@ static int ti_tscadc_remove(struct platform_device *pdev)
return 0;
}
+static int __maybe_unused ti_tscadc_can_wakeup(struct device *dev, void *data)
+{
+ return device_may_wakeup(dev);
+}
+
static int __maybe_unused tscadc_suspend(struct device *dev)
{
struct ti_tscadc_dev *tscadc = dev_get_drvdata(dev);
regmap_write(tscadc->regmap, REG_SE, 0x00);
+ if (device_for_each_child(dev, NULL, ti_tscadc_can_wakeup)) {
+ u32 ctrl;
+
+ regmap_read(tscadc->regmap, REG_CTRL, &ctrl);
+ ctrl &= ~(CNTRLREG_POWERDOWN);
+ ctrl |= CNTRLREG_TSCSSENB;
+ regmap_write(tscadc->regmap, REG_CTRL, ctrl);
+ }
pm_runtime_put_sync(dev);
return 0;
--
2.20.1
From: Thierry Reding <[email protected]>
[ Upstream commit 9f67f7583e77fe5dc57aab3a6159c2642544eaad ]
Probe deferrals aren't actual errors, so silence the error message in
case the PWM cannot yet be acquired.
Signed-off-by: Thierry Reding <[email protected]>
Signed-off-by: Guenter Roeck <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/hwmon/pwm-fan.c | 8 ++++++--
1 file changed, 6 insertions(+), 2 deletions(-)
diff --git a/drivers/hwmon/pwm-fan.c b/drivers/hwmon/pwm-fan.c
index fb03449de2e07..aa6333620c37d 100644
--- a/drivers/hwmon/pwm-fan.c
+++ b/drivers/hwmon/pwm-fan.c
@@ -231,8 +231,12 @@ static int pwm_fan_probe(struct platform_device *pdev)
ctx->pwm = devm_of_pwm_get(&pdev->dev, pdev->dev.of_node, NULL);
if (IS_ERR(ctx->pwm)) {
- dev_err(&pdev->dev, "Could not get PWM\n");
- return PTR_ERR(ctx->pwm);
+ ret = PTR_ERR(ctx->pwm);
+
+ if (ret != -EPROBE_DEFER)
+ dev_err(&pdev->dev, "Could not get PWM: %d\n", ret);
+
+ return ret;
}
platform_set_drvdata(pdev, ctx);
--
2.20.1
From: Timothy E Baldwin <[email protected]>
[ Upstream commit f18aef742c8fbd68e280dff0a63ba0ca6ee8ad85 ]
On at least x86 and ARM64, and as documented in the ptrace man page
a skipped system call will still cause a syscall exit ptrace stop.
Previous to this commit 32-bit ARM did not, resulting in strace
being confused when seccomp skips system calls.
This change also impacts programs that use ptrace to skip system calls.
Fixes: ad75b51459ae ("ARM: 7579/1: arch/allow a scno of -1 to not cause a SIGILL")
Signed-off-by: Timothy E Baldwin <[email protected]>
Signed-off-by: Eugene Syromyatnikov <[email protected]>
Reviewed-by: Kees Cook <[email protected]>
Tested-by: Kees Cook <[email protected]>
Tested-by: Eugene Syromyatnikov <[email protected]>
Signed-off-by: Russell King <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm/kernel/entry-common.S | 9 ++++-----
1 file changed, 4 insertions(+), 5 deletions(-)
diff --git a/arch/arm/kernel/entry-common.S b/arch/arm/kernel/entry-common.S
index d69adfb3d79e6..178a2a9606595 100644
--- a/arch/arm/kernel/entry-common.S
+++ b/arch/arm/kernel/entry-common.S
@@ -263,16 +263,15 @@ __sys_trace:
cmp scno, #-1 @ skip the syscall?
bne 2b
add sp, sp, #S_OFF @ restore stack
- b ret_slow_syscall
-__sys_trace_return:
- str r0, [sp, #S_R0 + S_OFF]! @ save returned r0
+__sys_trace_return_nosave:
+ enable_irq_notrace
mov r0, sp
bl syscall_trace_exit
b ret_slow_syscall
-__sys_trace_return_nosave:
- enable_irq_notrace
+__sys_trace_return:
+ str r0, [sp, #S_R0 + S_OFF]! @ save returned r0
mov r0, sp
bl syscall_trace_exit
b ret_slow_syscall
--
2.20.1
From: Bjorn Helgaas <[email protected]>
[ Upstream commit 51fbf14f2528a8c6401290e37f1c893a2412f1d3 ]
The only use of KEXEC_BACKUP_SRC_END is as an argument to
walk_system_ram_res():
int crash_load_segments(struct kimage *image)
{
...
walk_system_ram_res(KEXEC_BACKUP_SRC_START, KEXEC_BACKUP_SRC_END,
image, determine_backup_region);
walk_system_ram_res() expects "start, end" arguments that are inclusive,
i.e., the range to be walked includes both the start and end addresses.
KEXEC_BACKUP_SRC_END was previously defined as (640 * 1024UL), which is the
first address *past* the desired 0-640KB range.
Define KEXEC_BACKUP_SRC_END as (640 * 1024UL - 1) so the KEXEC_BACKUP_SRC
region is [0-0x9ffff], not [0-0xa0000].
Fixes: dd5f726076cc ("kexec: support for kexec on panic using new system call")
Signed-off-by: Bjorn Helgaas <[email protected]>
Signed-off-by: Borislav Petkov <[email protected]>
CC: "H. Peter Anvin" <[email protected]>
CC: Andrew Morton <[email protected]>
CC: Brijesh Singh <[email protected]>
CC: Greg Kroah-Hartman <[email protected]>
CC: Ingo Molnar <[email protected]>
CC: Lianbo Jiang <[email protected]>
CC: Takashi Iwai <[email protected]>
CC: Thomas Gleixner <[email protected]>
CC: Tom Lendacky <[email protected]>
CC: Vivek Goyal <[email protected]>
CC: [email protected]
CC: [email protected]
CC: [email protected]
CC: [email protected]
CC: [email protected]
Link: http://lkml.kernel.org/r/153805811578.1157.6948388946904655969.stgit@bhelgaas-glaptop.roam.corp.google.com
Signed-off-by: Sasha Levin <[email protected]>
---
arch/x86/include/asm/kexec.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/x86/include/asm/kexec.h b/arch/x86/include/asm/kexec.h
index 282630e4c6ea4..1624a7ffa95d8 100644
--- a/arch/x86/include/asm/kexec.h
+++ b/arch/x86/include/asm/kexec.h
@@ -66,7 +66,7 @@ struct kimage;
/* Memory to backup during crash kdump */
#define KEXEC_BACKUP_SRC_START (0UL)
-#define KEXEC_BACKUP_SRC_END (640 * 1024UL) /* 640K */
+#define KEXEC_BACKUP_SRC_END (640 * 1024UL - 1) /* 640K */
/*
* CPU does not save ss and sp on stack if execution is already
--
2.20.1
From: Marek Vasut <[email protected]>
[ Upstream commit 70728c29465bc4bfa7a8c14304771eab77e923c7 ]
The priv->data->set can be NULL while flags contains GPIO_SYSCON_FEAT_OUT
and chip->set is valid pointer. This happens in case the controller uses
the default GPIO setter. Always use chip->set to access the setter to avoid
possible NULL pointer dereferencing.
Signed-off-by: Marek Vasut <[email protected]>
Signed-off-by: Linus Walleij <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpio/gpio-syscon.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/gpio/gpio-syscon.c b/drivers/gpio/gpio-syscon.c
index 537cec7583fca..cf88a0bfe99ea 100644
--- a/drivers/gpio/gpio-syscon.c
+++ b/drivers/gpio/gpio-syscon.c
@@ -122,7 +122,7 @@ static int syscon_gpio_dir_out(struct gpio_chip *chip, unsigned offset, int val)
BIT(offs % SYSCON_REG_BITS));
}
- priv->data->set(chip, offset, val);
+ chip->set(chip, offset, val);
return 0;
}
--
2.20.1
From: Nathan Chancellor <[email protected]>
[ Upstream commit 9524d6b265f9b2b9a61fceb2ee2ce1c2a83e39ca ]
Clang warns when implicitly converting from one enumerated type to
another. Avoid this by using the equivalent value from the expected
type.
In file included from drivers/dma/ep93xx_dma.c:30:
./include/linux/platform_data/dma-ep93xx.h:88:10: warning: implicit
conversion from enumeration type 'enum dma_data_direction' to different
enumeration type 'enum dma_transfer_direction' [-Wenum-conversion]
return DMA_NONE;
~~~~~~ ^~~~~~~~
1 warning generated.
Reported-by: Nick Desaulniers <[email protected]>
Signed-off-by: Nathan Chancellor <[email protected]>
Reviewed-by: Nick Desaulniers <[email protected]>
Signed-off-by: Vinod Koul <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
include/linux/platform_data/dma-ep93xx.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/include/linux/platform_data/dma-ep93xx.h b/include/linux/platform_data/dma-ep93xx.h
index e82c642fa53cd..5913be0793a26 100644
--- a/include/linux/platform_data/dma-ep93xx.h
+++ b/include/linux/platform_data/dma-ep93xx.h
@@ -84,7 +84,7 @@ static inline enum dma_transfer_direction
ep93xx_dma_chan_direction(struct dma_chan *chan)
{
if (!ep93xx_dma_chan_is_m2p(chan))
- return DMA_NONE;
+ return DMA_TRANS_NONE;
/* even channels are for TX, odd for RX */
return (chan->chan_id % 2 == 0) ? DMA_MEM_TO_DEV : DMA_DEV_TO_MEM;
--
2.20.1
From: Geert Uytterhoeven <[email protected]>
[ Upstream commit b790c8ea5593d6dc3580adfad8e117eeb56af874 ]
Calling of_node_put() decreases the reference count of a device tree
object, and may free some data.
However, the of_phandle_args structure embedding it is passed to
reset_controller_dev.of_xlate() after that, so it may still be accessed.
Move the call to of_node_put() down to fix this.
Signed-off-by: Geert Uytterhoeven <[email protected]>
[[email protected]: moved of_node_put after mutex_unlock]
Signed-off-by: Philipp Zabel <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/reset/core.c | 15 ++++++++-------
1 file changed, 8 insertions(+), 7 deletions(-)
diff --git a/drivers/reset/core.c b/drivers/reset/core.c
index 188205a552613..d0ebca301afc9 100644
--- a/drivers/reset/core.c
+++ b/drivers/reset/core.c
@@ -324,28 +324,29 @@ struct reset_control *__of_reset_control_get(struct device_node *node,
break;
}
}
- of_node_put(args.np);
if (!rcdev) {
- mutex_unlock(&reset_list_mutex);
- return ERR_PTR(-EPROBE_DEFER);
+ rstc = ERR_PTR(-EPROBE_DEFER);
+ goto out;
}
if (WARN_ON(args.args_count != rcdev->of_reset_n_cells)) {
- mutex_unlock(&reset_list_mutex);
- return ERR_PTR(-EINVAL);
+ rstc = ERR_PTR(-EINVAL);
+ goto out;
}
rstc_id = rcdev->of_xlate(rcdev, &args);
if (rstc_id < 0) {
- mutex_unlock(&reset_list_mutex);
- return ERR_PTR(rstc_id);
+ rstc = ERR_PTR(rstc_id);
+ goto out;
}
/* reset_list_mutex also protects the rcdev's reset_control list */
rstc = __reset_control_get_internal(rcdev, rstc_id, shared);
+out:
mutex_unlock(&reset_list_mutex);
+ of_node_put(args.np);
return rstc;
}
--
2.20.1
From: Shenghui Wang <[email protected]>
[ Upstream commit 46010141da6677b81cc77f9b47f8ac62bd1cbfd3 ]
Recal cached_dev_sectors on cached_dev detached, as recal done on
cached_dev attached.
Update the cached_dev_sectors before bcache_device_detach called
as bcache_device_detach will set bcache_device->c to NULL.
Signed-off-by: Shenghui Wang <[email protected]>
Signed-off-by: Coly Li <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/md/bcache/super.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/md/bcache/super.c b/drivers/md/bcache/super.c
index c5bc3e5e921e4..080f9afcde8da 100644
--- a/drivers/md/bcache/super.c
+++ b/drivers/md/bcache/super.c
@@ -904,6 +904,7 @@ static void cached_dev_detach_finish(struct work_struct *w)
bch_write_bdev_super(dc, &cl);
closure_sync(&cl);
+ calc_cached_dev_sectors(dc->disk.c);
bcache_device_detach(&dc->disk);
list_move(&dc->list, &uncached_devices);
--
2.20.1
From: Dan Carpenter <[email protected]>
[ Upstream commit e5017716adb8aa5c01c52386c1b7470101ffe9c5 ]
The "index + count" addition can overflow. Both come directly from the
user. This bug leads to an information leak.
Signed-off-by: Dan Carpenter <[email protected]>
Cc: Peter Malone <[email protected]>
Cc: Philippe Ombredanne <[email protected]>
Cc: Mathieu Malaterre <[email protected]>
Signed-off-by: Bartlomiej Zolnierkiewicz <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/video/fbdev/sbuslib.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/video/fbdev/sbuslib.c b/drivers/video/fbdev/sbuslib.c
index b425718925c01..52e161dbd2047 100644
--- a/drivers/video/fbdev/sbuslib.c
+++ b/drivers/video/fbdev/sbuslib.c
@@ -170,7 +170,7 @@ int sbusfb_ioctl_helper(unsigned long cmd, unsigned long arg,
get_user(ublue, &c->blue))
return -EFAULT;
- if (index + count > cmap->len)
+ if (index > cmap->len || count > cmap->len - index)
return -EINVAL;
for (i = 0; i < count; i++) {
--
2.20.1
From: Dan Carpenter <[email protected]>
[ Upstream commit d8bad911e5e55e228d59c0606ff7e6b8131ca7bf ]
I'm not sure why the code assumes that only the first put_user() needs
an access_ok() check. I have made all the put_user() and get_user()
calls checked.
Signed-off-by: Dan Carpenter <[email protected]>
Cc: Philippe Ombredanne <[email protected]>
Cc: Mathieu Malaterre <[email protected]>
Cc: Peter Malone <[email protected]>,
Signed-off-by: Bartlomiej Zolnierkiewicz <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/video/fbdev/sbuslib.c | 26 +++++++++++++-------------
1 file changed, 13 insertions(+), 13 deletions(-)
diff --git a/drivers/video/fbdev/sbuslib.c b/drivers/video/fbdev/sbuslib.c
index 31c301d6be621..b425718925c01 100644
--- a/drivers/video/fbdev/sbuslib.c
+++ b/drivers/video/fbdev/sbuslib.c
@@ -105,11 +105,11 @@ int sbusfb_ioctl_helper(unsigned long cmd, unsigned long arg,
struct fbtype __user *f = (struct fbtype __user *) arg;
if (put_user(type, &f->fb_type) ||
- __put_user(info->var.yres, &f->fb_height) ||
- __put_user(info->var.xres, &f->fb_width) ||
- __put_user(fb_depth, &f->fb_depth) ||
- __put_user(0, &f->fb_cmsize) ||
- __put_user(fb_size, &f->fb_cmsize))
+ put_user(info->var.yres, &f->fb_height) ||
+ put_user(info->var.xres, &f->fb_width) ||
+ put_user(fb_depth, &f->fb_depth) ||
+ put_user(0, &f->fb_cmsize) ||
+ put_user(fb_size, &f->fb_cmsize))
return -EFAULT;
return 0;
}
@@ -124,10 +124,10 @@ int sbusfb_ioctl_helper(unsigned long cmd, unsigned long arg,
unsigned int index, count, i;
if (get_user(index, &c->index) ||
- __get_user(count, &c->count) ||
- __get_user(ured, &c->red) ||
- __get_user(ugreen, &c->green) ||
- __get_user(ublue, &c->blue))
+ get_user(count, &c->count) ||
+ get_user(ured, &c->red) ||
+ get_user(ugreen, &c->green) ||
+ get_user(ublue, &c->blue))
return -EFAULT;
cmap.len = 1;
@@ -164,10 +164,10 @@ int sbusfb_ioctl_helper(unsigned long cmd, unsigned long arg,
u8 red, green, blue;
if (get_user(index, &c->index) ||
- __get_user(count, &c->count) ||
- __get_user(ured, &c->red) ||
- __get_user(ugreen, &c->green) ||
- __get_user(ublue, &c->blue))
+ get_user(count, &c->count) ||
+ get_user(ured, &c->red) ||
+ get_user(ugreen, &c->green) ||
+ get_user(ublue, &c->blue))
return -EFAULT;
if (index + count > cmap->len)
--
2.20.1
From: Sara Sharon <[email protected]>
[ Upstream commit 8c7fd6a365eb5b2647b2c01918730d0a485b9f85 ]
In the past, we needed to program the keys when entering D3. This was
since we replaced the image. However, now that there is a single
image, this is no longer needed. Note that RSC is sent separately in
a new command. This solves issues with newer devices that support PN
offload. Since driver re-sent the keys, the PN got zeroed and the
receiver dropped the next packets, until PN caught up again.
Signed-off-by: Sara Sharon <[email protected]>
Signed-off-by: Luca Coelho <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/intel/iwlwifi/mvm/d3.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/d3.c b/drivers/net/wireless/intel/iwlwifi/mvm/d3.c
index 207d8ae1e1160..19052efe53f12 100644
--- a/drivers/net/wireless/intel/iwlwifi/mvm/d3.c
+++ b/drivers/net/wireless/intel/iwlwifi/mvm/d3.c
@@ -935,8 +935,10 @@ int iwl_mvm_wowlan_config_key_params(struct iwl_mvm *mvm,
{
struct iwl_wowlan_kek_kck_material_cmd kek_kck_cmd = {};
struct iwl_wowlan_tkip_params_cmd tkip_cmd = {};
+ bool unified = fw_has_capa(&mvm->fw->ucode_capa,
+ IWL_UCODE_TLV_CAPA_CNSLDTD_D3_D0_IMG);
struct wowlan_key_data key_data = {
- .configure_keys = !d0i3,
+ .configure_keys = !d0i3 && !unified,
.use_rsc_tsc = false,
.tkip = &tkip_cmd,
.use_tkip = false,
--
2.20.1
From: Colin Ian King <[email protected]>
[ Upstream commit 32ae592036d7aeaabcccb2b1715373a68639a768 ]
Shifting the u8 value[3] by an int can lead to sign-extension
overflow. For example, if value[3] is 0xff and the shift is 24 then it
is promoted to int and then the top bit is sign-extended so that all
upper 32 bits are set. Fix this by casting value[3] to a u32 before
the shift.
Detected by CoverityScan, CID#1016522 ("Unintended sign extension")
Fixes: e0d3bafd0258 ("V4L/DVB (10954): Add cx231xx USB driver")
Signed-off-by: Colin Ian King <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/media/usb/cx231xx/cx231xx-video.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/media/usb/cx231xx/cx231xx-video.c b/drivers/media/usb/cx231xx/cx231xx-video.c
index 6414188ffdfac..cd973e780da93 100644
--- a/drivers/media/usb/cx231xx/cx231xx-video.c
+++ b/drivers/media/usb/cx231xx/cx231xx-video.c
@@ -1389,7 +1389,7 @@ int cx231xx_g_register(struct file *file, void *priv,
ret = cx231xx_read_ctrl_reg(dev, VRT_GET_REGISTER,
(u16)reg->reg, value, 4);
reg->val = value[0] | value[1] << 8 |
- value[2] << 16 | value[3] << 24;
+ value[2] << 16 | (u32)value[3] << 24;
reg->size = 4;
break;
case 1: /* AFE - read byte */
--
2.20.1
From: Roger Quadros <[email protected]>
[ Upstream commit a763ecc15d0e37c3a15ff6825183061209832685 ]
OMAP5's Super-Speed USB port has a software mailbox register
that needs to be fed with VBUS and ID events from an external
VBUS/ID comparator.
Without this, Host role will not work correctly.
Fixes: 656c1a65ab55 ("ARM: dts: omap5: enable OTG role for DWC3 controller")
Reported-by: H. Nikolaus Schaller <[email protected]>
Signed-off-by: Roger Quadros <[email protected]>
Signed-off-by: Tony Lindgren <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm/boot/dts/omap5-board-common.dtsi | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm/boot/dts/omap5-board-common.dtsi b/arch/arm/boot/dts/omap5-board-common.dtsi
index 3e9e3d90f2b4f..e412373fe7bfd 100644
--- a/arch/arm/boot/dts/omap5-board-common.dtsi
+++ b/arch/arm/boot/dts/omap5-board-common.dtsi
@@ -695,6 +695,7 @@
};
&dwc3 {
+ extcon = <&extcon_usb3>;
dr_mode = "otg";
};
--
2.20.1
From: Andrew Zaborowski <[email protected]>
[ Upstream commit efdfce7270de85a8706d1ea051bef3a7486809ff ]
Use the NL80211_KEY_IDX attribute inside the NL80211_ATTR_KEY in
NL80211_CMD_GET_KEY responses to comply with nl80211_key_policy.
This is unlikely to affect existing userspace.
Signed-off-by: Andrew Zaborowski <[email protected]>
Signed-off-by: Johannes Berg <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/wireless/nl80211.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index 060bc0cc82526..bb19be78aed70 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -3058,7 +3058,7 @@ static void get_key_callback(void *c, struct key_params *params)
params->cipher)))
goto nla_put_failure;
- if (nla_put_u8(cookie->msg, NL80211_ATTR_KEY_IDX, cookie->idx))
+ if (nla_put_u8(cookie->msg, NL80211_KEY_IDX, cookie->idx))
goto nla_put_failure;
nla_nest_end(cookie->msg, key);
--
2.20.1
From: Rami Rosen <[email protected]>
[ Upstream commit f4d34aa8c887a8a2d23ef546da0efa10e3f77241 ]
Signed-off-by: Rami Rosen <[email protected]>
Signed-off-by: Vinod Koul <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/dma/ioat/init.c | 7 +++----
1 file changed, 3 insertions(+), 4 deletions(-)
diff --git a/drivers/dma/ioat/init.c b/drivers/dma/ioat/init.c
index d139706f01fe8..9d936584d3310 100644
--- a/drivers/dma/ioat/init.c
+++ b/drivers/dma/ioat/init.c
@@ -129,7 +129,7 @@ static void
ioat_init_channel(struct ioatdma_device *ioat_dma,
struct ioatdma_chan *ioat_chan, int idx);
static void ioat_intr_quirk(struct ioatdma_device *ioat_dma);
-static int ioat_enumerate_channels(struct ioatdma_device *ioat_dma);
+static void ioat_enumerate_channels(struct ioatdma_device *ioat_dma);
static int ioat3_dma_self_test(struct ioatdma_device *ioat_dma);
static int ioat_dca_enabled = 1;
@@ -573,7 +573,7 @@ static void ioat_dma_remove(struct ioatdma_device *ioat_dma)
* ioat_enumerate_channels - find and initialize the device's channels
* @ioat_dma: the ioat dma device to be enumerated
*/
-static int ioat_enumerate_channels(struct ioatdma_device *ioat_dma)
+static void ioat_enumerate_channels(struct ioatdma_device *ioat_dma)
{
struct ioatdma_chan *ioat_chan;
struct device *dev = &ioat_dma->pdev->dev;
@@ -592,7 +592,7 @@ static int ioat_enumerate_channels(struct ioatdma_device *ioat_dma)
xfercap_log = readb(ioat_dma->reg_base + IOAT_XFERCAP_OFFSET);
xfercap_log &= 0x1f; /* bits [4:0] valid */
if (xfercap_log == 0)
- return 0;
+ return;
dev_dbg(dev, "%s: xfercap = %d\n", __func__, 1 << xfercap_log);
for (i = 0; i < dma->chancnt; i++) {
@@ -609,7 +609,6 @@ static int ioat_enumerate_channels(struct ioatdma_device *ioat_dma)
}
}
dma->chancnt = i;
- return i;
}
/**
--
2.20.1
From: Marek Szyprowski <[email protected]>
[ Upstream commit 1da220e3a5d22fccda0bc8542997abc1d1741268 ]
clk_notifier_register() documentation states, that the provided notifier
callbacks associated with the notifier must not re-enter into the clk
framework by calling any top-level clk APIs. Fix this by replacing
clk_get_rate() calls with clk_hw_get_rate(), which is safe in this
context.
Signed-off-by: Marek Szyprowski <[email protected]>
Signed-off-by: Sylwester Nawrocki <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/clk/samsung/clk-cpu.c | 6 +++---
drivers/clk/samsung/clk-cpu.h | 2 +-
2 files changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/clk/samsung/clk-cpu.c b/drivers/clk/samsung/clk-cpu.c
index 8bf7e805fd349..1271315b0c25b 100644
--- a/drivers/clk/samsung/clk-cpu.c
+++ b/drivers/clk/samsung/clk-cpu.c
@@ -152,7 +152,7 @@ static int exynos_cpuclk_pre_rate_change(struct clk_notifier_data *ndata,
struct exynos_cpuclk *cpuclk, void __iomem *base)
{
const struct exynos_cpuclk_cfg_data *cfg_data = cpuclk->cfg;
- unsigned long alt_prate = clk_get_rate(cpuclk->alt_parent);
+ unsigned long alt_prate = clk_hw_get_rate(cpuclk->alt_parent);
unsigned long alt_div = 0, alt_div_mask = DIV_MASK;
unsigned long div0, div1 = 0, mux_reg;
unsigned long flags;
@@ -280,7 +280,7 @@ static int exynos5433_cpuclk_pre_rate_change(struct clk_notifier_data *ndata,
struct exynos_cpuclk *cpuclk, void __iomem *base)
{
const struct exynos_cpuclk_cfg_data *cfg_data = cpuclk->cfg;
- unsigned long alt_prate = clk_get_rate(cpuclk->alt_parent);
+ unsigned long alt_prate = clk_hw_get_rate(cpuclk->alt_parent);
unsigned long alt_div = 0, alt_div_mask = DIV_MASK;
unsigned long div0, div1 = 0, mux_reg;
unsigned long flags;
@@ -432,7 +432,7 @@ int __init exynos_register_cpu_clock(struct samsung_clk_provider *ctx,
else
cpuclk->clk_nb.notifier_call = exynos_cpuclk_notifier_cb;
- cpuclk->alt_parent = __clk_lookup(alt_parent);
+ cpuclk->alt_parent = __clk_get_hw(__clk_lookup(alt_parent));
if (!cpuclk->alt_parent) {
pr_err("%s: could not lookup alternate parent %s\n",
__func__, alt_parent);
diff --git a/drivers/clk/samsung/clk-cpu.h b/drivers/clk/samsung/clk-cpu.h
index d4b6b517fe1b4..bd38c6aa38970 100644
--- a/drivers/clk/samsung/clk-cpu.h
+++ b/drivers/clk/samsung/clk-cpu.h
@@ -49,7 +49,7 @@ struct exynos_cpuclk_cfg_data {
*/
struct exynos_cpuclk {
struct clk_hw hw;
- struct clk *alt_parent;
+ struct clk_hw *alt_parent;
void __iomem *ctrl_base;
spinlock_t *lock;
const struct exynos_cpuclk_cfg_data *cfg;
--
2.20.1
From: Nathan Chancellor <[email protected]>
[ Upstream commit 7cea645ae9c5a54aa7904fddb2cdf250acd63a6c ]
Clang warns that the address of a pointer will always evaluated as true
in a boolean context.
drivers/video/backlight/lm3639_bl.c:403:14: warning: address of
'pchip->cdev_torch' will always evaluate to 'true'
[-Wpointer-bool-conversion]
if (&pchip->cdev_torch)
~~ ~~~~~~~^~~~~~~~~~
drivers/video/backlight/lm3639_bl.c:405:14: warning: address of
'pchip->cdev_flash' will always evaluate to 'true'
[-Wpointer-bool-conversion]
if (&pchip->cdev_flash)
~~ ~~~~~~~^~~~~~~~~~
2 warnings generated.
These statements have been present since 2012, introduced by
commit 0f59858d5119 ("backlight: add new lm3639 backlight
driver"). Given that they have been called unconditionally since
then presumably without any issues, removing the always true if
statements to fix the warnings without any real world changes.
Link: https://github.com/ClangBuiltLinux/linux/issues/119
Signed-off-by: Nathan Chancellor <[email protected]>
Reviewed-by: Daniel Thompson <[email protected]>
Signed-off-by: Lee Jones <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/video/backlight/lm3639_bl.c | 6 ++----
1 file changed, 2 insertions(+), 4 deletions(-)
diff --git a/drivers/video/backlight/lm3639_bl.c b/drivers/video/backlight/lm3639_bl.c
index cd50df5807ead..086611c7bc03c 100644
--- a/drivers/video/backlight/lm3639_bl.c
+++ b/drivers/video/backlight/lm3639_bl.c
@@ -400,10 +400,8 @@ static int lm3639_remove(struct i2c_client *client)
regmap_write(pchip->regmap, REG_ENABLE, 0x00);
- if (&pchip->cdev_torch)
- led_classdev_unregister(&pchip->cdev_torch);
- if (&pchip->cdev_flash)
- led_classdev_unregister(&pchip->cdev_flash);
+ led_classdev_unregister(&pchip->cdev_torch);
+ led_classdev_unregister(&pchip->cdev_flash);
if (pchip->bled)
device_remove_file(&(pchip->bled->dev), &dev_attr_bled_mode);
return 0;
--
2.20.1
From: Florian Fainelli <[email protected]>
[ Upstream commit 7fb44929cb0e5cdcde143e1ca3ca57b5b8247db0 ]
The Broadcom STB AHCI controller is the same as the one found on DSL
SoCs, so we will utilize the same driver on these systems as well.
Signed-off-by: Florian Fainelli <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/ata/Kconfig | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
index 5d16fc4fa46c7..a8d4f4b5a77eb 100644
--- a/drivers/ata/Kconfig
+++ b/drivers/ata/Kconfig
@@ -100,7 +100,8 @@ config SATA_AHCI_PLATFORM
config AHCI_BRCM
tristate "Broadcom AHCI SATA support"
- depends on ARCH_BRCMSTB || BMIPS_GENERIC || ARCH_BCM_NSP
+ depends on ARCH_BRCMSTB || BMIPS_GENERIC || ARCH_BCM_NSP || \
+ ARCH_BCM_63XX
help
This option enables support for the AHCI SATA3 controller found on
Broadcom SoC's.
--
2.20.1
From: Vasily Gorbik <[email protected]>
[ Upstream commit 348498458505e202df41b6b9a78da448d39298b7 ]
vdso is mapped into user space processes, which won't have kasan
shodow mapped.
Reviewed-by: Martin Schwidefsky <[email protected]>
Signed-off-by: Vasily Gorbik <[email protected]>
Signed-off-by: Martin Schwidefsky <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/s390/kernel/vdso32/Makefile | 3 ++-
arch/s390/kernel/vdso64/Makefile | 3 ++-
2 files changed, 4 insertions(+), 2 deletions(-)
diff --git a/arch/s390/kernel/vdso32/Makefile b/arch/s390/kernel/vdso32/Makefile
index ca7c3c34f94ba..2bb3a255e51a4 100644
--- a/arch/s390/kernel/vdso32/Makefile
+++ b/arch/s390/kernel/vdso32/Makefile
@@ -24,9 +24,10 @@ obj-y += vdso32_wrapper.o
extra-y += vdso32.lds
CPPFLAGS_vdso32.lds += -P -C -U$(ARCH)
-# Disable gcov profiling and ubsan for VDSO code
+# Disable gcov profiling, ubsan and kasan for VDSO code
GCOV_PROFILE := n
UBSAN_SANITIZE := n
+KASAN_SANITIZE := n
# Force dependency (incbin is bad)
$(obj)/vdso32_wrapper.o : $(obj)/vdso32.so
diff --git a/arch/s390/kernel/vdso64/Makefile b/arch/s390/kernel/vdso64/Makefile
index 84af2b6b64c42..76c56b5382be9 100644
--- a/arch/s390/kernel/vdso64/Makefile
+++ b/arch/s390/kernel/vdso64/Makefile
@@ -24,9 +24,10 @@ obj-y += vdso64_wrapper.o
extra-y += vdso64.lds
CPPFLAGS_vdso64.lds += -P -C -U$(ARCH)
-# Disable gcov profiling and ubsan for VDSO code
+# Disable gcov profiling, ubsan and kasan for VDSO code
GCOV_PROFILE := n
UBSAN_SANITIZE := n
+KASAN_SANITIZE := n
# Force dependency (incbin is bad)
$(obj)/vdso64_wrapper.o : $(obj)/vdso64.so
--
2.20.1
From: Ben Greear <[email protected]>
[ Upstream commit 833fd34d743c728afe6d127ef7bee67e7d9199a8 ]
The vdev-start-response message should cause the
completion to fire, even in the error case. Otherwise,
the user still gets no useful information and everything
is blocked until the timeout period.
Add some warning text to print out the invalid status
code to aid debugging, and propagate failure code.
Signed-off-by: Ben Greear <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/ath/ath10k/core.h | 1 +
drivers/net/wireless/ath/ath10k/mac.c | 2 +-
drivers/net/wireless/ath/ath10k/wmi.c | 19 ++++++++++++++++---
drivers/net/wireless/ath/ath10k/wmi.h | 8 +++++++-
4 files changed, 25 insertions(+), 5 deletions(-)
diff --git a/drivers/net/wireless/ath/ath10k/core.h b/drivers/net/wireless/ath/ath10k/core.h
index 90c0c4a7175db..414153cd57845 100644
--- a/drivers/net/wireless/ath/ath10k/core.h
+++ b/drivers/net/wireless/ath/ath10k/core.h
@@ -811,6 +811,7 @@ struct ath10k {
struct completion install_key_done;
+ int last_wmi_vdev_start_status;
struct completion vdev_setup_done;
struct workqueue_struct *workqueue;
diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
index 1588fe8110d00..2294ba311c47a 100644
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -947,7 +947,7 @@ static inline int ath10k_vdev_setup_sync(struct ath10k *ar)
if (time_left == 0)
return -ETIMEDOUT;
- return 0;
+ return ar->last_wmi_vdev_start_status;
}
static int ath10k_monitor_vdev_start(struct ath10k *ar, int vdev_id)
diff --git a/drivers/net/wireless/ath/ath10k/wmi.c b/drivers/net/wireless/ath/ath10k/wmi.c
index c208fed048554..af3bc06b4aeda 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.c
+++ b/drivers/net/wireless/ath/ath10k/wmi.c
@@ -3103,18 +3103,31 @@ void ath10k_wmi_event_vdev_start_resp(struct ath10k *ar, struct sk_buff *skb)
{
struct wmi_vdev_start_ev_arg arg = {};
int ret;
+ u32 status;
ath10k_dbg(ar, ATH10K_DBG_WMI, "WMI_VDEV_START_RESP_EVENTID\n");
+ ar->last_wmi_vdev_start_status = 0;
+
ret = ath10k_wmi_pull_vdev_start(ar, skb, &arg);
if (ret) {
ath10k_warn(ar, "failed to parse vdev start event: %d\n", ret);
- return;
+ ar->last_wmi_vdev_start_status = ret;
+ goto out;
}
- if (WARN_ON(__le32_to_cpu(arg.status)))
- return;
+ status = __le32_to_cpu(arg.status);
+ if (WARN_ON_ONCE(status)) {
+ ath10k_warn(ar, "vdev-start-response reports status error: %d (%s)\n",
+ status, (status == WMI_VDEV_START_CHAN_INVALID) ?
+ "chan-invalid" : "unknown");
+ /* Setup is done one way or another though, so we should still
+ * do the completion, so don't return here.
+ */
+ ar->last_wmi_vdev_start_status = -EINVAL;
+ }
+out:
complete(&ar->vdev_setup_done);
}
diff --git a/drivers/net/wireless/ath/ath10k/wmi.h b/drivers/net/wireless/ath/ath10k/wmi.h
index 9b8562ff66987..cce028ea9b57d 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.h
+++ b/drivers/net/wireless/ath/ath10k/wmi.h
@@ -6248,11 +6248,17 @@ struct wmi_ch_info_ev_arg {
__le32 rx_frame_count;
};
+/* From 10.4 firmware, not sure all have the same values. */
+enum wmi_vdev_start_status {
+ WMI_VDEV_START_OK = 0,
+ WMI_VDEV_START_CHAN_INVALID,
+};
+
struct wmi_vdev_start_ev_arg {
__le32 vdev_id;
__le32 req_id;
__le32 resp_type; /* %WMI_VDEV_RESP_ */
- __le32 status;
+ __le32 status; /* See wmi_vdev_start_status enum above */
};
struct wmi_peer_kick_ev_arg {
--
2.20.1
From: Jaegeuk Kim <[email protected]>
[ Upstream commit 61f7725aa148ee870436a29d3a24d5c00ab7e9af ]
This fixes overriding error number in f2fs_gc.
Reviewed-by: Chao Yu <[email protected]>
Signed-off-by: Jaegeuk Kim <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/f2fs/gc.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/fs/f2fs/gc.c b/fs/f2fs/gc.c
index 759056e776e50..b1d62003cda62 100644
--- a/fs/f2fs/gc.c
+++ b/fs/f2fs/gc.c
@@ -985,7 +985,7 @@ int f2fs_gc(struct f2fs_sb_info *sbi, bool sync)
put_gc_inode(&gc_list);
- if (sync)
+ if (sync && !ret)
ret = sec_freed ? 0 : -EAGAIN;
return ret;
}
--
2.20.1
From: zhong jiang <[email protected]>
[ Upstream commit 02241995b004faa7d9ff628e97f24056190853f8 ]
The function should return -EFAULT when copy_from_user fails. Even
though the caller does not distinguish them. but we should keep backward
compatibility.
Signed-off-by: zhong jiang <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/misc/genwqe/card_utils.c | 13 +++++++------
1 file changed, 7 insertions(+), 6 deletions(-)
diff --git a/drivers/misc/genwqe/card_utils.c b/drivers/misc/genwqe/card_utils.c
index b642b4fd731b6..95584bffa4eaf 100644
--- a/drivers/misc/genwqe/card_utils.c
+++ b/drivers/misc/genwqe/card_utils.c
@@ -298,7 +298,7 @@ static int genwqe_sgl_size(int num_pages)
int genwqe_alloc_sync_sgl(struct genwqe_dev *cd, struct genwqe_sgl *sgl,
void __user *user_addr, size_t user_size)
{
- int rc;
+ int ret = -ENOMEM;
struct pci_dev *pci_dev = cd->pci_dev;
sgl->fpage_offs = offset_in_page((unsigned long)user_addr);
@@ -317,7 +317,7 @@ int genwqe_alloc_sync_sgl(struct genwqe_dev *cd, struct genwqe_sgl *sgl,
if (get_order(sgl->sgl_size) > MAX_ORDER) {
dev_err(&pci_dev->dev,
"[%s] err: too much memory requested!\n", __func__);
- return -ENOMEM;
+ return ret;
}
sgl->sgl = __genwqe_alloc_consistent(cd, sgl->sgl_size,
@@ -325,7 +325,7 @@ int genwqe_alloc_sync_sgl(struct genwqe_dev *cd, struct genwqe_sgl *sgl,
if (sgl->sgl == NULL) {
dev_err(&pci_dev->dev,
"[%s] err: no memory available!\n", __func__);
- return -ENOMEM;
+ return ret;
}
/* Only use buffering on incomplete pages */
@@ -338,7 +338,7 @@ int genwqe_alloc_sync_sgl(struct genwqe_dev *cd, struct genwqe_sgl *sgl,
/* Sync with user memory */
if (copy_from_user(sgl->fpage + sgl->fpage_offs,
user_addr, sgl->fpage_size)) {
- rc = -EFAULT;
+ ret = -EFAULT;
goto err_out;
}
}
@@ -351,7 +351,7 @@ int genwqe_alloc_sync_sgl(struct genwqe_dev *cd, struct genwqe_sgl *sgl,
/* Sync with user memory */
if (copy_from_user(sgl->lpage, user_addr + user_size -
sgl->lpage_size, sgl->lpage_size)) {
- rc = -EFAULT;
+ ret = -EFAULT;
goto err_out2;
}
}
@@ -373,7 +373,8 @@ int genwqe_alloc_sync_sgl(struct genwqe_dev *cd, struct genwqe_sgl *sgl,
sgl->sgl = NULL;
sgl->sgl_dma_addr = 0;
sgl->sgl_size = 0;
- return -ENOMEM;
+
+ return ret;
}
int genwqe_setup_sgl(struct genwqe_dev *cd, struct genwqe_sgl *sgl,
--
2.20.1
From: H. Nikolaus Schaller <[email protected]>
[ Upstream commit 656c1a65ab555ee5c7cd0d6aee8ab82ca3c1795f ]
Since SMPS10 and OTG cable detection extcon are described here, and
work to enable OTG power when an OTG cable is plugged in, we can
define OTG mode in the controller (which is disabled by default in
omap5.dtsi).
Tested on OMAP5EVM and Pyra.
Suggested-by: Roger Quadros <[email protected]>
Signed-off-by: H. Nikolaus Schaller <[email protected]>
Signed-off-by: Tony Lindgren <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm/boot/dts/omap5-board-common.dtsi | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/arch/arm/boot/dts/omap5-board-common.dtsi b/arch/arm/boot/dts/omap5-board-common.dtsi
index 4caadb2532497..3e9e3d90f2b4f 100644
--- a/arch/arm/boot/dts/omap5-board-common.dtsi
+++ b/arch/arm/boot/dts/omap5-board-common.dtsi
@@ -694,6 +694,10 @@
vbus-supply = <&smps10_out1_reg>;
};
+&dwc3 {
+ dr_mode = "otg";
+};
+
&mcspi1 {
};
--
2.20.1
From: Jens Axboe <[email protected]>
commit 2d7271501720038381d45fb3dcbe4831228fc8cc upstream.
For passthrough requests, libata-scsi takes what the user passes in
as gospel. This can be problematic if the user fills in the CDB
incorrectly. One example of that is in request sizes. For read/write
commands, the CDB contains fields describing the transfer length of
the request. These should match with the SG_IO header fields, but
libata-scsi currently does no validation of that.
Check that the number of blocks in the CDB for passthrough requests
matches what was mapped into the request. If the CDB asks for more
data then the validated SG_IO header fields, error it.
Reported-by: Krishna Ram Prakash R <[email protected]>
Reviewed-by: Kees Cook <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/ata/libata-scsi.c | 21 +++++++++++++++++++++
1 file changed, 21 insertions(+)
--- a/drivers/ata/libata-scsi.c
+++ b/drivers/ata/libata-scsi.c
@@ -1734,6 +1734,21 @@ nothing_to_do:
return 1;
}
+static bool ata_check_nblocks(struct scsi_cmnd *scmd, u32 n_blocks)
+{
+ struct request *rq = scmd->request;
+ u32 req_blocks;
+
+ if (!blk_rq_is_passthrough(rq))
+ return true;
+
+ req_blocks = blk_rq_bytes(rq) / scmd->device->sector_size;
+ if (n_blocks > req_blocks)
+ return false;
+
+ return true;
+}
+
/**
* ata_scsi_rw_xlat - Translate SCSI r/w command into an ATA one
* @qc: Storage for translated ATA taskfile
@@ -1776,6 +1791,8 @@ static unsigned int ata_scsi_rw_xlat(str
scsi_10_lba_len(cdb, &block, &n_block);
if (cdb[1] & (1 << 3))
tf_flags |= ATA_TFLAG_FUA;
+ if (!ata_check_nblocks(scmd, n_block))
+ goto invalid_fld;
break;
case READ_6:
case WRITE_6:
@@ -1790,6 +1807,8 @@ static unsigned int ata_scsi_rw_xlat(str
*/
if (!n_block)
n_block = 256;
+ if (!ata_check_nblocks(scmd, n_block))
+ goto invalid_fld;
break;
case READ_16:
case WRITE_16:
@@ -1800,6 +1819,8 @@ static unsigned int ata_scsi_rw_xlat(str
scsi_16_lba_len(cdb, &block, &n_block);
if (cdb[1] & (1 << 3))
tf_flags |= ATA_TFLAG_FUA;
+ if (!ata_check_nblocks(scmd, n_block))
+ goto invalid_fld;
break;
default:
DPRINTK("no-byte command\n");
From: Radu Solea <[email protected]>
[ Upstream commit fadd7a6e616b89c7f4f7bfa7b824f290bab32c3c ]
The DCP driver does not obey cryptlen, when doing android CTS this
results in passing to hardware input stream lengths which are not
multiple of block size.
Add a check to prevent future erroneous stream lengths from reaching the
hardware and adjust the scatterlist walking code to obey cryptlen.
Also properly copy-out the IV for chaining.
Signed-off-by: Radu Solea <[email protected]>
Signed-off-by: Franck LENORMAND <[email protected]>
Signed-off-by: Leonard Crestez <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/crypto/mxs-dcp.c | 33 +++++++++++++++++++++++++++++++--
1 file changed, 31 insertions(+), 2 deletions(-)
diff --git a/drivers/crypto/mxs-dcp.c b/drivers/crypto/mxs-dcp.c
index 7483adf120084..b4bd34429cc14 100644
--- a/drivers/crypto/mxs-dcp.c
+++ b/drivers/crypto/mxs-dcp.c
@@ -225,6 +225,12 @@ static int mxs_dcp_run_aes(struct dcp_async_ctx *actx,
dma_addr_t dst_phys = dma_map_single(sdcp->dev, sdcp->coh->aes_out_buf,
DCP_BUF_SZ, DMA_FROM_DEVICE);
+ if (actx->fill % AES_BLOCK_SIZE) {
+ dev_err(sdcp->dev, "Invalid block size!\n");
+ ret = -EINVAL;
+ goto aes_done_run;
+ }
+
/* Fill in the DMA descriptor. */
desc->control0 = MXS_DCP_CONTROL0_DECR_SEMAPHORE |
MXS_DCP_CONTROL0_INTERRUPT |
@@ -254,6 +260,7 @@ static int mxs_dcp_run_aes(struct dcp_async_ctx *actx,
ret = mxs_dcp_start_dma(actx);
+aes_done_run:
dma_unmap_single(sdcp->dev, key_phys, 2 * AES_KEYSIZE_128,
DMA_TO_DEVICE);
dma_unmap_single(sdcp->dev, src_phys, DCP_BUF_SZ, DMA_TO_DEVICE);
@@ -280,13 +287,15 @@ static int mxs_dcp_aes_block_crypt(struct crypto_async_request *arq)
uint8_t *out_tmp, *src_buf, *dst_buf = NULL;
uint32_t dst_off = 0;
+ uint32_t last_out_len = 0;
uint8_t *key = sdcp->coh->aes_key;
int ret = 0;
int split = 0;
- unsigned int i, len, clen, rem = 0;
+ unsigned int i, len, clen, rem = 0, tlen = 0;
int init = 0;
+ bool limit_hit = false;
actx->fill = 0;
@@ -305,6 +314,11 @@ static int mxs_dcp_aes_block_crypt(struct crypto_async_request *arq)
for_each_sg(req->src, src, nents, i) {
src_buf = sg_virt(src);
len = sg_dma_len(src);
+ tlen += len;
+ limit_hit = tlen > req->nbytes;
+
+ if (limit_hit)
+ len = req->nbytes - (tlen - len);
do {
if (actx->fill + len > out_off)
@@ -321,13 +335,15 @@ static int mxs_dcp_aes_block_crypt(struct crypto_async_request *arq)
* If we filled the buffer or this is the last SG,
* submit the buffer.
*/
- if (actx->fill == out_off || sg_is_last(src)) {
+ if (actx->fill == out_off || sg_is_last(src) ||
+ limit_hit) {
ret = mxs_dcp_run_aes(actx, req, init);
if (ret)
return ret;
init = 0;
out_tmp = out_buf;
+ last_out_len = actx->fill;
while (dst && actx->fill) {
if (!split) {
dst_buf = sg_virt(dst);
@@ -350,6 +366,19 @@ static int mxs_dcp_aes_block_crypt(struct crypto_async_request *arq)
}
}
} while (len);
+
+ if (limit_hit)
+ break;
+ }
+
+ /* Copy the IV for CBC for chaining */
+ if (!rctx->ecb) {
+ if (rctx->enc)
+ memcpy(req->info, out_buf+(last_out_len-AES_BLOCK_SIZE),
+ AES_BLOCK_SIZE);
+ else
+ memcpy(req->info, in_buf+(last_out_len-AES_BLOCK_SIZE),
+ AES_BLOCK_SIZE);
}
return ret;
--
2.20.1
From: Daniel Vetter <[email protected]>
commit 3b8720e63f4a1fc6f422a49ecbaa3b59c86d5aaf upstream.
It's dead code ever since
commit 34280340b1dc74c521e636f45cd728f9abf56ee2
Author: Geert Uytterhoeven <[email protected]>
Date: Fri Dec 4 17:01:43 2015 +0100
fbdev: Remove unused SH-Mobile HDMI driver
Also with this gone we can remove the cea_modes db. This entire thing
is massively incomplete anyway, compared to the CEA parsing that
drm_edid.c does.
Acked-by: Linus Torvalds <[email protected]>
Cc: Tavis Ormandy <[email protected]>
Signed-off-by: Daniel Vetter <[email protected]>
Signed-off-by: Bartlomiej Zolnierkiewicz <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/video/fbdev/core/fbmon.c | 95 --------------------------------------
drivers/video/fbdev/core/modedb.c | 57 ----------------------
include/linux/fb.h | 3 -
3 files changed, 155 deletions(-)
--- a/drivers/video/fbdev/core/fbmon.c
+++ b/drivers/video/fbdev/core/fbmon.c
@@ -997,97 +997,6 @@ void fb_edid_to_monspecs(unsigned char *
DPRINTK("========================================\n");
}
-/**
- * fb_edid_add_monspecs() - add monitor video modes from E-EDID data
- * @edid: 128 byte array with an E-EDID block
- * @spacs: monitor specs to be extended
- */
-void fb_edid_add_monspecs(unsigned char *edid, struct fb_monspecs *specs)
-{
- unsigned char *block;
- struct fb_videomode *m;
- int num = 0, i;
- u8 svd[64], edt[(128 - 4) / DETAILED_TIMING_DESCRIPTION_SIZE];
- u8 pos = 4, svd_n = 0;
-
- if (!edid)
- return;
-
- if (!edid_checksum(edid))
- return;
-
- if (edid[0] != 0x2 ||
- edid[2] < 4 || edid[2] > 128 - DETAILED_TIMING_DESCRIPTION_SIZE)
- return;
-
- DPRINTK(" Short Video Descriptors\n");
-
- while (pos < edid[2]) {
- u8 len = edid[pos] & 0x1f, type = (edid[pos] >> 5) & 7;
- pr_debug("Data block %u of %u bytes\n", type, len);
- if (type == 2) {
- for (i = pos; i < pos + len; i++) {
- u8 idx = edid[pos + i] & 0x7f;
- svd[svd_n++] = idx;
- pr_debug("N%sative mode #%d\n",
- edid[pos + i] & 0x80 ? "" : "on-n", idx);
- }
- } else if (type == 3 && len >= 3) {
- /* Check Vendor Specific Data Block. For HDMI,
- it is always 00-0C-03 for HDMI Licensing, LLC. */
- if (edid[pos + 1] == 3 && edid[pos + 2] == 0xc &&
- edid[pos + 3] == 0)
- specs->misc |= FB_MISC_HDMI;
- }
- pos += len + 1;
- }
-
- block = edid + edid[2];
-
- DPRINTK(" Extended Detailed Timings\n");
-
- for (i = 0; i < (128 - edid[2]) / DETAILED_TIMING_DESCRIPTION_SIZE;
- i++, block += DETAILED_TIMING_DESCRIPTION_SIZE)
- if (PIXEL_CLOCK)
- edt[num++] = block - edid;
-
- /* Yikes, EDID data is totally useless */
- if (!(num + svd_n))
- return;
-
- m = kzalloc((specs->modedb_len + num + svd_n) *
- sizeof(struct fb_videomode), GFP_KERNEL);
-
- if (!m)
- return;
-
- memcpy(m, specs->modedb, specs->modedb_len * sizeof(struct fb_videomode));
-
- for (i = specs->modedb_len; i < specs->modedb_len + num; i++) {
- get_detailed_timing(edid + edt[i - specs->modedb_len], &m[i]);
- if (i == specs->modedb_len)
- m[i].flag |= FB_MODE_IS_FIRST;
- pr_debug("Adding %ux%u@%u\n", m[i].xres, m[i].yres, m[i].refresh);
- }
-
- for (i = specs->modedb_len + num; i < specs->modedb_len + num + svd_n; i++) {
- int idx = svd[i - specs->modedb_len - num];
- if (!idx || idx >= ARRAY_SIZE(cea_modes)) {
- pr_warning("Reserved SVD code %d\n", idx);
- } else if (!cea_modes[idx].xres) {
- pr_warning("Unimplemented SVD code %d\n", idx);
- } else {
- memcpy(&m[i], cea_modes + idx, sizeof(m[i]));
- pr_debug("Adding SVD #%d: %ux%u@%u\n", idx,
- m[i].xres, m[i].yres, m[i].refresh);
- }
- }
-
- kfree(specs->modedb);
- specs->modedb = m;
- specs->modedb_len = specs->modedb_len + num + svd_n;
-}
-
/*
* VESA Generalized Timing Formula (GTF)
*/
@@ -1497,9 +1406,6 @@ int fb_parse_edid(unsigned char *edid, s
void fb_edid_to_monspecs(unsigned char *edid, struct fb_monspecs *specs)
{
}
-void fb_edid_add_monspecs(unsigned char *edid, struct fb_monspecs *specs)
-{
-}
void fb_destroy_modedb(struct fb_videomode *modedb)
{
}
@@ -1607,7 +1513,6 @@ EXPORT_SYMBOL(fb_firmware_edid);
EXPORT_SYMBOL(fb_parse_edid);
EXPORT_SYMBOL(fb_edid_to_monspecs);
-EXPORT_SYMBOL(fb_edid_add_monspecs);
EXPORT_SYMBOL(fb_get_mode);
EXPORT_SYMBOL(fb_validate_mode);
EXPORT_SYMBOL(fb_destroy_modedb);
--- a/drivers/video/fbdev/core/modedb.c
+++ b/drivers/video/fbdev/core/modedb.c
@@ -289,63 +289,6 @@ static const struct fb_videomode modedb[
};
#ifdef CONFIG_FB_MODE_HELPERS
-const struct fb_videomode cea_modes[65] = {
- /* #1: [email protected]/60Hz */
- [1] = {
- NULL, 60, 640, 480, 39722, 48, 16, 33, 10, 96, 2, 0,
- FB_VMODE_NONINTERLACED, 0,
- },
- /* #3: [email protected]/60Hz */
- [3] = {
- NULL, 60, 720, 480, 37037, 60, 16, 30, 9, 62, 6, 0,
- FB_VMODE_NONINTERLACED, 0,
- },
- /* #5: [email protected]/60Hz */
- [5] = {
- NULL, 60, 1920, 1080, 13763, 148, 88, 15, 2, 44, 5,
- FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
- FB_VMODE_INTERLACED, 0,
- },
- /* #7: 720(1440)[email protected]/60Hz */
- [7] = {
- NULL, 60, 1440, 480, 18554/*37108*/, 114, 38, 15, 4, 124, 3, 0,
- FB_VMODE_INTERLACED, 0,
- },
- /* #9: 720(1440)[email protected]/60Hz */
- [9] = {
- NULL, 60, 1440, 240, 18554, 114, 38, 16, 4, 124, 3, 0,
- FB_VMODE_NONINTERLACED, 0,
- },
- /* #18: 720x576pH@50Hz */
- [18] = {
- NULL, 50, 720, 576, 37037, 68, 12, 39, 5, 64, 5, 0,
- FB_VMODE_NONINTERLACED, 0,
- },
- /* #19: 1280x720p@50Hz */
- [19] = {
- NULL, 50, 1280, 720, 13468, 220, 440, 20, 5, 40, 5,
- FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
- FB_VMODE_NONINTERLACED, 0,
- },
- /* #20: 1920x1080i@50Hz */
- [20] = {
- NULL, 50, 1920, 1080, 13480, 148, 528, 15, 5, 528, 5,
- FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
- FB_VMODE_INTERLACED, 0,
- },
- /* #32: [email protected]/24Hz */
- [32] = {
- NULL, 24, 1920, 1080, 13468, 148, 638, 36, 4, 44, 5,
- FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
- FB_VMODE_NONINTERLACED, 0,
- },
- /* #35: (2880)[email protected]/60Hz */
- [35] = {
- NULL, 60, 2880, 480, 9250, 240, 64, 30, 9, 248, 6, 0,
- FB_VMODE_NONINTERLACED, 0,
- },
-};
-
const struct fb_videomode vesa_modes[] = {
/* 0 640x350-85 VESA */
{ NULL, 85, 640, 350, 31746, 96, 32, 60, 32, 64, 3,
--- a/include/linux/fb.h
+++ b/include/linux/fb.h
@@ -732,8 +732,6 @@ extern int fb_parse_edid(unsigned char *
extern const unsigned char *fb_firmware_edid(struct device *device);
extern void fb_edid_to_monspecs(unsigned char *edid,
struct fb_monspecs *specs);
-extern void fb_edid_add_monspecs(unsigned char *edid,
- struct fb_monspecs *specs);
extern void fb_destroy_modedb(struct fb_videomode *modedb);
extern int fb_find_mode_cvt(struct fb_videomode *mode, int margins, int rb);
extern unsigned char *fb_ddc_read(struct i2c_adapter *adapter);
@@ -807,7 +805,6 @@ struct dmt_videomode {
extern const char *fb_mode_option;
extern const struct fb_videomode vesa_modes[];
-extern const struct fb_videomode cea_modes[65];
extern const struct dmt_videomode dmt_modes[];
struct fb_modelist {
From: Dan Carpenter <[email protected]>
commit a56dcc6b455830776899ce3686735f1172e12243 upstream.
This code is supposed to test for negative error codes and partial
reads, but because sizeof() is size_t (unsigned) type then negative
error codes are type promoted to high positive values and the condition
doesn't work as expected.
Fixes: 332f989a3b00 ("CDC-NCM: handle incomplete transfer of MTU")
Signed-off-by: Dan Carpenter <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Nobuhiro Iwamatsu <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/usb/cdc_ncm.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/net/usb/cdc_ncm.c
+++ b/drivers/net/usb/cdc_ncm.c
@@ -577,7 +577,7 @@ static void cdc_ncm_set_dgram_size(struc
err = usbnet_read_cmd(dev, USB_CDC_GET_MAX_DATAGRAM_SIZE,
USB_TYPE_CLASS | USB_DIR_IN | USB_RECIP_INTERFACE,
0, iface_no, &max_datagram_size, sizeof(max_datagram_size));
- if (err < sizeof(max_datagram_size)) {
+ if (err != sizeof(max_datagram_size)) {
dev_dbg(&dev->intf->dev, "GET_MAX_DATAGRAM_SIZE failed\n");
goto out;
}
From: zhong jiang <[email protected]>
The commit 3ce6b467b9b2 ("memfd: Fix locking when tagging pins")
introduces the following warning messages.
*WARNING: suspicious RCU usage in memfd_wait_for_pins*
It is because we still use radix_tree_deref_slot without read_rcu_lock.
We should use radix_tree_deref_slot_protected instead in the case.
Cc: [email protected]
Fixes: 3ce6b467b9b2 ("memfd: Fix locking when tagging pins")
Signed-off-by: zhong jiang <[email protected]>
Reviewed-by: Matthew Wilcox (Oracle) <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
mm/shmem.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/mm/shmem.c
+++ b/mm/shmem.c
@@ -2464,7 +2464,7 @@ static void shmem_tag_pins(struct addres
spin_lock_irq(&mapping->tree_lock);
radix_tree_for_each_slot(slot, &mapping->page_tree, &iter, start) {
- page = radix_tree_deref_slot(slot);
+ page = radix_tree_deref_slot_protected(slot, &mapping->tree_lock);
if (!page || radix_tree_exception(page)) {
if (radix_tree_deref_retry(page)) {
slot = radix_tree_iter_retry(&iter);
From: Jouni Hogander <[email protected]>
commit ed50e1600b4483c049ce76e6bd3b665a6a9300ed upstream.
This patch is fixing memory leak reported by Syzkaller:
BUG: memory leak unreferenced object 0xffff888067f65500 (size 4096):
comm "syz-executor043", pid 454, jiffies 4294759719 (age 11.930s)
hex dump (first 32 bytes):
73 6c 63 61 6e 30 00 00 00 00 00 00 00 00 00 00 slcan0..........
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<00000000a06eec0d>] __kmalloc+0x18b/0x2c0
[<0000000083306e66>] kvmalloc_node+0x3a/0xc0
[<000000006ac27f87>] alloc_netdev_mqs+0x17a/0x1080
[<0000000061a996c9>] slcan_open+0x3ae/0x9a0
[<000000001226f0f9>] tty_ldisc_open.isra.1+0x76/0xc0
[<0000000019289631>] tty_set_ldisc+0x28c/0x5f0
[<000000004de5a617>] tty_ioctl+0x48d/0x1590
[<00000000daef496f>] do_vfs_ioctl+0x1c7/0x1510
[<0000000059068dbc>] ksys_ioctl+0x99/0xb0
[<000000009a6eb334>] __x64_sys_ioctl+0x78/0xb0
[<0000000053d0332e>] do_syscall_64+0x16f/0x580
[<0000000021b83b99>] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[<000000008ea75434>] 0xffffffffffffffff
Cc: Wolfgang Grandegger <[email protected]>
Cc: Marc Kleine-Budde <[email protected]>
Cc: Lukas Bulwahn <[email protected]>
Signed-off-by: Jouni Hogander <[email protected]>
Signed-off-by: Marc Kleine-Budde <[email protected]>
Cc: Oliver Hartkopp <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/can/slcan.c | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/net/can/slcan.c
+++ b/drivers/net/can/slcan.c
@@ -613,6 +613,7 @@ err_free_chan:
sl->tty = NULL;
tty->disc_data = NULL;
clear_bit(SLF_INUSE, &sl->flags);
+ free_netdev(sl->dev);
err_exit:
rtnl_unlock();
From: Israel Rukshin <[email protected]>
[ Upstream commit 65f07f5a09dacf3b60619f196f096ea3671a5eda ]
In case target remote invalidates bogus rkey and signature is not used,
pi_ctx is NULL deref.
The commit also fails the connection on bogus remote invalidation.
Fixes: 59caaed7a72a ("IB/iser: Support the remote invalidation exception")
Signed-off-by: Israel Rukshin <[email protected]>
Reviewed-by: Max Gurtovoy <[email protected]>
Reviewed-by: Sagi Grimberg <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/infiniband/ulp/iser/iser_initiator.c | 18 +++++++++++++-----
1 file changed, 13 insertions(+), 5 deletions(-)
diff --git a/drivers/infiniband/ulp/iser/iser_initiator.c b/drivers/infiniband/ulp/iser/iser_initiator.c
index 81ae2e30dd125..27a7e4406f343 100644
--- a/drivers/infiniband/ulp/iser/iser_initiator.c
+++ b/drivers/infiniband/ulp/iser/iser_initiator.c
@@ -590,13 +590,19 @@ void iser_login_rsp(struct ib_cq *cq, struct ib_wc *wc)
ib_conn->post_recv_buf_count--;
}
-static inline void
+static inline int
iser_inv_desc(struct iser_fr_desc *desc, u32 rkey)
{
- if (likely(rkey == desc->rsc.mr->rkey))
+ if (likely(rkey == desc->rsc.mr->rkey)) {
desc->rsc.mr_valid = 0;
- else if (likely(rkey == desc->pi_ctx->sig_mr->rkey))
+ } else if (likely(desc->pi_ctx && rkey == desc->pi_ctx->sig_mr->rkey)) {
desc->pi_ctx->sig_mr_valid = 0;
+ } else {
+ iser_err("Bogus remote invalidation for rkey %#x\n", rkey);
+ return -EINVAL;
+ }
+
+ return 0;
}
static int
@@ -624,12 +630,14 @@ iser_check_remote_inv(struct iser_conn *iser_conn,
if (iser_task->dir[ISER_DIR_IN]) {
desc = iser_task->rdma_reg[ISER_DIR_IN].mem_h;
- iser_inv_desc(desc, rkey);
+ if (unlikely(iser_inv_desc(desc, rkey)))
+ return -EINVAL;
}
if (iser_task->dir[ISER_DIR_OUT]) {
desc = iser_task->rdma_reg[ISER_DIR_OUT].mem_h;
- iser_inv_desc(desc, rkey);
+ if (unlikely(iser_inv_desc(desc, rkey)))
+ return -EINVAL;
}
} else {
iser_err("failed to get task for itt=%d\n", hdr->itt);
--
2.20.1
From: Rob Herring <[email protected]>
[ Upstream commit e9f0878c4b2004ac19581274c1ae4c61ae3ca70e ]
dtc has new checks for SPI buses. Fix the warnings in node names.
arch/arm64/boot/dts/amd/amd-overdrive.dtb: Warning (spi_bus_bridge): /smb/ssp@e1030000: node name for SPI buses should be 'spi'
arch/arm64/boot/dts/amd/amd-overdrive-rev-b0.dtb: Warning (spi_bus_bridge): /smb/ssp@e1030000: node name for SPI buses should be 'spi'
arch/arm64/boot/dts/amd/amd-overdrive-rev-b1.dtb: Warning (spi_bus_bridge): /smb/ssp@e1030000: node name for SPI buses should be 'spi'
Cc: Brijesh Singh <[email protected]>
Cc: Suravee Suthikulpanit <[email protected]>
Cc: Tom Lendacky <[email protected]>
Signed-off-by: Rob Herring <[email protected]>
Signed-off-by: Arnd Bergmann <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi b/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi
index bd3adeac374f4..2973a14523eaf 100644
--- a/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi
+++ b/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi
@@ -106,7 +106,7 @@
clock-names = "uartclk", "apb_pclk";
};
- spi0: ssp@e1020000 {
+ spi0: spi@e1020000 {
status = "disabled";
compatible = "arm,pl022", "arm,primecell";
reg = <0 0xe1020000 0 0x1000>;
@@ -116,7 +116,7 @@
clock-names = "apb_pclk";
};
- spi1: ssp@e1030000 {
+ spi1: spi@e1030000 {
status = "disabled";
compatible = "arm,pl022", "arm,primecell";
reg = <0 0xe1030000 0 0x1000>;
--
2.20.1
From: Finn Thain <[email protected]>
[ Upstream commit 08267216b3f8aa5adc204bdccf8deb72c1cd7665 ]
The X3T9.2 specification (draft) says, under "6.1.4.1 RESELECTION",
... The reselected initiator shall then assert the BSY signal
within a selection abort time of its most recent detection of being
reselected; this is required for correct operation of the time-out
procedure.
The selection abort time is only 200 us which may be insufficient time for a
printk() call. Move the diagnostics to the error paths.
Tested-by: Michael Schmitz <[email protected]>
Signed-off-by: Finn Thain <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/scsi/NCR5380.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/scsi/NCR5380.c b/drivers/scsi/NCR5380.c
index a4856eeac26f6..03f9ddbc37fbb 100644
--- a/drivers/scsi/NCR5380.c
+++ b/drivers/scsi/NCR5380.c
@@ -2109,8 +2109,6 @@ static void NCR5380_reselect(struct Scsi_Host *instance)
return;
}
- dsprintk(NDEBUG_RESELECTION, instance, "reselect\n");
-
/*
* At this point, we have detected that our SCSI ID is on the bus,
* SEL is true and BSY was false for at least one bus settle delay
@@ -2123,6 +2121,7 @@ static void NCR5380_reselect(struct Scsi_Host *instance)
NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_BSY);
if (NCR5380_poll_politely(instance,
STATUS_REG, SR_SEL, 0, 2 * HZ) < 0) {
+ shost_printk(KERN_ERR, instance, "reselect: !SEL timeout\n");
NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
return;
}
@@ -2134,6 +2133,7 @@ static void NCR5380_reselect(struct Scsi_Host *instance)
if (NCR5380_poll_politely(instance,
STATUS_REG, SR_REQ, SR_REQ, 2 * HZ) < 0) {
+ shost_printk(KERN_ERR, instance, "reselect: REQ timeout\n");
do_abort(instance);
return;
}
--
2.20.1
From: Cameron Kaiser <[email protected]>
[ Upstream commit 1006284c5e411872333967b1970c2ca46a9e225f ]
When an OS (currently only classic Mac OS) is running in KVM-PR and makes a
linked jump from code with split hack addressing enabled into code that does
not, LR is not correctly updated and reflects the previously munged PC.
To fix this, this patch undoes the address munge when exiting split
hack mode so that code relying on LR being a proper address will now
execute. This does not affect OS X or other operating systems running
on KVM-PR.
Signed-off-by: Cameron Kaiser <[email protected]>
Signed-off-by: Paul Mackerras <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/powerpc/kvm/book3s.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/arch/powerpc/kvm/book3s.c b/arch/powerpc/kvm/book3s.c
index 73c3c127d8584..209cad89a11a5 100644
--- a/arch/powerpc/kvm/book3s.c
+++ b/arch/powerpc/kvm/book3s.c
@@ -78,8 +78,11 @@ void kvmppc_unfixup_split_real(struct kvm_vcpu *vcpu)
{
if (vcpu->arch.hflags & BOOK3S_HFLAG_SPLIT_HACK) {
ulong pc = kvmppc_get_pc(vcpu);
+ ulong lr = kvmppc_get_lr(vcpu);
if ((pc & SPLIT_HACK_MASK) == SPLIT_HACK_OFFS)
kvmppc_set_pc(vcpu, pc & ~SPLIT_HACK_MASK);
+ if ((lr & SPLIT_HACK_MASK) == SPLIT_HACK_OFFS)
+ kvmppc_set_lr(vcpu, lr & ~SPLIT_HACK_MASK);
vcpu->arch.hflags &= ~BOOK3S_HFLAG_SPLIT_HACK;
}
}
--
2.20.1
From: Chung-Hsien Hsu <[email protected]>
[ Upstream commit fbf07000960d9c8a13fdc17c6de0230d681c7543 ]
The driver sends an action frame down and waits for a completion signal
triggered by the received BRCMF_E_ACTION_FRAME_OFF_CHAN_COMPLETE event
to continue the process. However, the action frame could be transmitted
either on the current channel or on an off channel. For the on-channel
case, only BRCMF_E_ACTION_FRAME_COMPLETE event will be received when
the frame is transmitted, which make the driver always wait a full
timeout duration. This patch has the completion signal be triggered by
receiving the BRCMF_E_ACTION_FRAME_COMPLETE event for the on-channel
case.
This change fixes WFA p2p certification 5.1.19 failure.
Signed-off-by: Chung-Hsien Hsu <[email protected]>
Signed-off-by: Chi-Hsien Lin <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
.../wireless/broadcom/brcm80211/brcmfmac/p2p.c | 17 +++++++++++++++--
.../wireless/broadcom/brcm80211/brcmfmac/p2p.h | 2 ++
2 files changed, 17 insertions(+), 2 deletions(-)
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/p2p.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/p2p.c
index c91f5ef0be7c3..aac9c97d22557 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/p2p.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/p2p.c
@@ -1462,10 +1462,12 @@ int brcmf_p2p_notify_action_tx_complete(struct brcmf_if *ifp,
return 0;
if (e->event_code == BRCMF_E_ACTION_FRAME_COMPLETE) {
- if (e->status == BRCMF_E_STATUS_SUCCESS)
+ if (e->status == BRCMF_E_STATUS_SUCCESS) {
set_bit(BRCMF_P2P_STATUS_ACTION_TX_COMPLETED,
&p2p->status);
- else {
+ if (!p2p->wait_for_offchan_complete)
+ complete(&p2p->send_af_done);
+ } else {
set_bit(BRCMF_P2P_STATUS_ACTION_TX_NOACK, &p2p->status);
/* If there is no ack, we don't need to wait for
* WLC_E_ACTION_FRAME_OFFCHAN_COMPLETE event
@@ -1516,6 +1518,17 @@ static s32 brcmf_p2p_tx_action_frame(struct brcmf_p2p_info *p2p,
p2p->af_sent_channel = le32_to_cpu(af_params->channel);
p2p->af_tx_sent_jiffies = jiffies;
+ if (test_bit(BRCMF_P2P_STATUS_DISCOVER_LISTEN, &p2p->status) &&
+ p2p->af_sent_channel ==
+ ieee80211_frequency_to_channel(p2p->remain_on_channel.center_freq))
+ p2p->wait_for_offchan_complete = false;
+ else
+ p2p->wait_for_offchan_complete = true;
+
+ brcmf_dbg(TRACE, "Waiting for %s tx completion event\n",
+ (p2p->wait_for_offchan_complete) ?
+ "off-channel" : "on-channel");
+
timeout = wait_for_completion_timeout(&p2p->send_af_done,
P2P_AF_MAX_WAIT_TIME);
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/p2p.h b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/p2p.h
index 8ce9447533ef8..fbee511489046 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/p2p.h
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/p2p.h
@@ -124,6 +124,7 @@ struct afx_hdl {
* @gon_req_action: about to send go negotiation requets frame.
* @block_gon_req_tx: drop tx go negotiation requets frame.
* @p2pdev_dynamically: is p2p device if created by module param or supplicant.
+ * @wait_for_offchan_complete: wait for off-channel tx completion event.
*/
struct brcmf_p2p_info {
struct brcmf_cfg80211_info *cfg;
@@ -144,6 +145,7 @@ struct brcmf_p2p_info {
bool gon_req_action;
bool block_gon_req_tx;
bool p2pdev_dynamically;
+ bool wait_for_offchan_complete;
};
s32 brcmf_p2p_attach(struct brcmf_cfg80211_info *cfg, bool p2pdev_forced);
--
2.20.1
From: Marc Dietrich <[email protected]>
[ Upstream commit ebea2a43fdafdbce918bd7e200b709d6c33b9f3b ]
The power key is controlled solely by the EC, which only tiggeres this
gpio after wakeup.
Fixes immediately return to suspend after wake from LP1.
Signed-off-by: Marc Dietrich <[email protected]>
Tested-by: Nicolas Chauvet <[email protected]>
Signed-off-by: Thierry Reding <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm/boot/dts/tegra20-paz00.dts | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/arch/arm/boot/dts/tegra20-paz00.dts b/arch/arm/boot/dts/tegra20-paz00.dts
index b4bfa5586c233..23d4c837b87a6 100644
--- a/arch/arm/boot/dts/tegra20-paz00.dts
+++ b/arch/arm/boot/dts/tegra20-paz00.dts
@@ -521,10 +521,10 @@
gpio-keys {
compatible = "gpio-keys";
- power {
- label = "Power";
+ wakeup {
+ label = "Wakeup";
gpios = <&gpio TEGRA_GPIO(J, 7) GPIO_ACTIVE_LOW>;
- linux,code = <KEY_POWER>;
+ linux,code = <KEY_WAKEUP>;
wakeup-source;
};
};
--
2.20.1
From: Rob Herring <[email protected]>
[ Upstream commit 131c3eb428ccd5f0c784b9edb4f72ec296a045d2 ]
dtc has new checks for SPI buses. The rk3036 dts file has a node named
spi' which causes false positive warnings. As the node is a pinctrl child
node, change the node name to be 'spi-pins' to fix the warnings.
arch/arm/boot/dts/rk3036-evb.dtb: Warning (spi_bus_bridge): /pinctrl/spi: incorrect #address-cells for SPI bus
arch/arm/boot/dts/rk3036-kylin.dtb: Warning (spi_bus_bridge): /pinctrl/spi: incorrect #address-cells for SPI bus
arch/arm/boot/dts/rk3036-evb.dtb: Warning (spi_bus_bridge): /pinctrl/spi: incorrect #size-cells for SPI bus
arch/arm/boot/dts/rk3036-kylin.dtb: Warning (spi_bus_bridge): /pinctrl/spi: incorrect #size-cells for SPI bus
Cc: Heiko Stuebner <[email protected]>
Cc: [email protected]
Signed-off-by: Rob Herring <[email protected]>
Signed-off-by: Heiko Stuebner <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm/boot/dts/rk3036.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/rk3036.dtsi b/arch/arm/boot/dts/rk3036.dtsi
index a935523a1eb85..147c73f68f1d9 100644
--- a/arch/arm/boot/dts/rk3036.dtsi
+++ b/arch/arm/boot/dts/rk3036.dtsi
@@ -744,7 +744,7 @@
/* no rts / cts for uart2 */
};
- spi {
+ spi-pins {
spi_txd:spi-txd {
rockchip,pins = <1 29 RK_FUNC_3 &pcfg_pull_default>;
};
--
2.20.1
From: Rob Herring <[email protected]>
[ Upstream commit 09bae3b64cb580c95329bd8d16f08f0a5cb81ec9 ]
SPI controller nodes should be named 'spi' rather than 'ssp'. Fixing the
name enables dtc SPI bus checks.
Cc: Chanho Min <[email protected]>
Signed-off-by: Rob Herring <[email protected]>
Signed-off-by: Arnd Bergmann <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm64/boot/dts/lg/lg1312.dtsi | 4 ++--
arch/arm64/boot/dts/lg/lg1313.dtsi | 4 ++--
2 files changed, 4 insertions(+), 4 deletions(-)
diff --git a/arch/arm64/boot/dts/lg/lg1312.dtsi b/arch/arm64/boot/dts/lg/lg1312.dtsi
index fbafa24cd5335..5e0c5dc973e33 100644
--- a/arch/arm64/boot/dts/lg/lg1312.dtsi
+++ b/arch/arm64/boot/dts/lg/lg1312.dtsi
@@ -167,14 +167,14 @@
clock-names = "apb_pclk";
status="disabled";
};
- spi0: ssp@fe800000 {
+ spi0: spi@fe800000 {
compatible = "arm,pl022", "arm,primecell";
reg = <0x0 0xfe800000 0x1000>;
interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk_bus>;
clock-names = "apb_pclk";
};
- spi1: ssp@fe900000 {
+ spi1: spi@fe900000 {
compatible = "arm,pl022", "arm,primecell";
reg = <0x0 0xfe900000 0x1000>;
interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm64/boot/dts/lg/lg1313.dtsi b/arch/arm64/boot/dts/lg/lg1313.dtsi
index e703e1149c757..f3b1ba6f74220 100644
--- a/arch/arm64/boot/dts/lg/lg1313.dtsi
+++ b/arch/arm64/boot/dts/lg/lg1313.dtsi
@@ -167,14 +167,14 @@
clock-names = "apb_pclk";
status="disabled";
};
- spi0: ssp@fe800000 {
+ spi0: spi@fe800000 {
compatible = "arm,pl022", "arm,primecell";
reg = <0x0 0xfe800000 0x1000>;
interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk_bus>;
clock-names = "apb_pclk";
};
- spi1: ssp@fe900000 {
+ spi1: spi@fe900000 {
compatible = "arm,pl022", "arm,primecell";
reg = <0x0 0xfe900000 0x1000>;
interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
--
2.20.1
From: Alex Williamson <[email protected]>
[ Upstream commit db04264fe9bc0f2b62e036629f9afb530324b693 ]
The SR-IOV spec requires that VFs must report zero for the INTx pin
register as VFs are precluded from INTx support. It's much easier for
the host kernel to understand whether a device is a VF and therefore
whether a non-zero pin register value is bogus than it is to do the
same in userspace. Override the INTx count for such devices and
virtualize the pin register to provide a consistent view of the device
to the user.
As this is clearly a spec violation, warn about it to support hardware
validation, but also provide a known whitelist as it doesn't do much
good to continue complaining if the hardware vendor doesn't plan to
fix it.
Known devices with this issue: 8086:270c
Tested-by: Gage Eads <[email protected]>
Reviewed-by: Ashok Raj <[email protected]>
Signed-off-by: Alex Williamson <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/vfio/pci/vfio_pci.c | 8 ++++++--
drivers/vfio/pci/vfio_pci_config.c | 27 +++++++++++++++++++++++++++
2 files changed, 33 insertions(+), 2 deletions(-)
diff --git a/drivers/vfio/pci/vfio_pci.c b/drivers/vfio/pci/vfio_pci.c
index a1a712d18e028..da3f0ed18c769 100644
--- a/drivers/vfio/pci/vfio_pci.c
+++ b/drivers/vfio/pci/vfio_pci.c
@@ -426,10 +426,14 @@ static int vfio_pci_get_irq_count(struct vfio_pci_device *vdev, int irq_type)
{
if (irq_type == VFIO_PCI_INTX_IRQ_INDEX) {
u8 pin;
+
+ if (!IS_ENABLED(CONFIG_VFIO_PCI_INTX) ||
+ vdev->nointx || vdev->pdev->is_virtfn)
+ return 0;
+
pci_read_config_byte(vdev->pdev, PCI_INTERRUPT_PIN, &pin);
- if (IS_ENABLED(CONFIG_VFIO_PCI_INTX) && !vdev->nointx && pin)
- return 1;
+ return pin ? 1 : 0;
} else if (irq_type == VFIO_PCI_MSI_IRQ_INDEX) {
u8 pos;
u16 flags;
diff --git a/drivers/vfio/pci/vfio_pci_config.c b/drivers/vfio/pci/vfio_pci_config.c
index 06a20ea183dd6..84905d074c4ff 100644
--- a/drivers/vfio/pci/vfio_pci_config.c
+++ b/drivers/vfio/pci/vfio_pci_config.c
@@ -1608,6 +1608,15 @@ static int vfio_ecap_init(struct vfio_pci_device *vdev)
return 0;
}
+/*
+ * Nag about hardware bugs, hopefully to have vendors fix them, but at least
+ * to collect a list of dependencies for the VF INTx pin quirk below.
+ */
+static const struct pci_device_id known_bogus_vf_intx_pin[] = {
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x270c) },
+ {}
+};
+
/*
* For each device we allocate a pci_config_map that indicates the
* capability occupying each dword and thus the struct perm_bits we
@@ -1673,6 +1682,24 @@ int vfio_config_init(struct vfio_pci_device *vdev)
if (pdev->is_virtfn) {
*(__le16 *)&vconfig[PCI_VENDOR_ID] = cpu_to_le16(pdev->vendor);
*(__le16 *)&vconfig[PCI_DEVICE_ID] = cpu_to_le16(pdev->device);
+
+ /*
+ * Per SR-IOV spec rev 1.1, 3.4.1.18 the interrupt pin register
+ * does not apply to VFs and VFs must implement this register
+ * as read-only with value zero. Userspace is not readily able
+ * to identify whether a device is a VF and thus that the pin
+ * definition on the device is bogus should it violate this
+ * requirement. We already virtualize the pin register for
+ * other purposes, so we simply need to replace the bogus value
+ * and consider VFs when we determine INTx IRQ count.
+ */
+ if (vconfig[PCI_INTERRUPT_PIN] &&
+ !pci_match_id(known_bogus_vf_intx_pin, pdev))
+ pci_warn(pdev,
+ "Hardware bug: VF reports bogus INTx pin %d\n",
+ vconfig[PCI_INTERRUPT_PIN]);
+
+ vconfig[PCI_INTERRUPT_PIN] = 0; /* Gratuitous for good VFs */
}
if (!IS_ENABLED(CONFIG_VFIO_PCI_INTX) || vdev->nointx)
--
2.20.1
From: Christoph Manszewski <[email protected]>
[ Upstream commit 6c12b6ba45490eeb820fdceccf5a53f42a26799c ]
Fix misalignment of continued argument list.
Signed-off-by: Christoph Manszewski <[email protected]>
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Acked-by: Kamil Konieczny <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/crypto/s5p-sss.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/crypto/s5p-sss.c b/drivers/crypto/s5p-sss.c
index 500e4090e2fd4..5a37c075ee553 100644
--- a/drivers/crypto/s5p-sss.c
+++ b/drivers/crypto/s5p-sss.c
@@ -298,7 +298,7 @@ static void s5p_unset_indata(struct s5p_aes_dev *dev)
}
static int s5p_make_sg_cpy(struct s5p_aes_dev *dev, struct scatterlist *src,
- struct scatterlist **dst)
+ struct scatterlist **dst)
{
void *pages;
int len;
@@ -510,7 +510,7 @@ static int s5p_set_indata_start(struct s5p_aes_dev *dev,
}
static int s5p_set_outdata_start(struct s5p_aes_dev *dev,
- struct ablkcipher_request *req)
+ struct ablkcipher_request *req)
{
struct scatterlist *sg;
int err;
--
2.20.1
From: Laura Abbott <[email protected]>
[ Upstream commit fa0218ef733e6f247a1a3986e3eb12460064ac77 ]
kgdbts current fails when compiled with restrict:
drivers/misc/kgdbts.c: In function ‘configure_kgdbts’:
drivers/misc/kgdbts.c:1070:2: error: ‘strcpy’ source argument is the same as destination [-Werror=restrict]
strcpy(config, opt);
^~~~~~~~~~~~~~~~~~~
As the error says, config is being used in both the source and destination.
Refactor the code to avoid the extra copy and put the parsing closer to
the actual location.
Signed-off-by: Laura Abbott <[email protected]>
Acked-by: Daniel Thompson <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/misc/kgdbts.c | 16 ++++++----------
1 file changed, 6 insertions(+), 10 deletions(-)
diff --git a/drivers/misc/kgdbts.c b/drivers/misc/kgdbts.c
index bb3a76ad80da2..fc8cb855c6e66 100644
--- a/drivers/misc/kgdbts.c
+++ b/drivers/misc/kgdbts.c
@@ -979,6 +979,12 @@ static void kgdbts_run_tests(void)
int nmi_sleep = 0;
int i;
+ verbose = 0;
+ if (strstr(config, "V1"))
+ verbose = 1;
+ if (strstr(config, "V2"))
+ verbose = 2;
+
ptr = strchr(config, 'F');
if (ptr)
fork_test = simple_strtol(ptr + 1, NULL, 10);
@@ -1062,13 +1068,6 @@ static int kgdbts_option_setup(char *opt)
return -ENOSPC;
}
strcpy(config, opt);
-
- verbose = 0;
- if (strstr(config, "V1"))
- verbose = 1;
- if (strstr(config, "V2"))
- verbose = 2;
-
return 0;
}
@@ -1080,9 +1079,6 @@ static int configure_kgdbts(void)
if (!strlen(config) || isspace(config[0]))
goto noconfig;
- err = kgdbts_option_setup(config);
- if (err)
- goto noconfig;
final_ack = 0;
run_plant_and_detach_test(1);
--
2.20.1
From: Marcel Ziswiler <[email protected]>
[ Upstream commit 1c997fe4becdc6fcbc06e23982ceb65621e6572a ]
Fix MMC1 cmd pin pull-up causing issues on carrier boards without
external pull-up.
Signed-off-by: Marcel Ziswiler <[email protected]>
Signed-off-by: Thierry Reding <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm/boot/dts/tegra30-apalis.dtsi | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/arch/arm/boot/dts/tegra30-apalis.dtsi b/arch/arm/boot/dts/tegra30-apalis.dtsi
index 192b95177aac3..826bdd0b8a257 100644
--- a/arch/arm/boot/dts/tegra30-apalis.dtsi
+++ b/arch/arm/boot/dts/tegra30-apalis.dtsi
@@ -147,14 +147,14 @@
/* Apalis MMC1 */
sdmmc3_clk_pa6 {
- nvidia,pins = "sdmmc3_clk_pa6",
- "sdmmc3_cmd_pa7";
+ nvidia,pins = "sdmmc3_clk_pa6";
nvidia,function = "sdmmc3";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
};
sdmmc3_dat0_pb7 {
- nvidia,pins = "sdmmc3_dat0_pb7",
+ nvidia,pins = "sdmmc3_cmd_pa7",
+ "sdmmc3_dat0_pb7",
"sdmmc3_dat1_pb6",
"sdmmc3_dat2_pb5",
"sdmmc3_dat3_pb4",
--
2.20.1
From: Masami Hiramatsu <[email protected]>
commit 13ebe18c94f5b0665c01ae7fad2717ae959f4212 upstream.
Since MOV SS and POP SS instructions will delay the exceptions until the
next instruction is executed, single-stepping on it by uprobes must be
prohibited.
uprobe already rejects probing on POP SS (0x1f), but allows probing on MOV
SS (0x8e and reg == 2). This checks the target instruction and if it is
MOV SS or POP SS, returns -ENOTSUPP to reject probing.
Signed-off-by: Masami Hiramatsu <[email protected]>
Signed-off-by: Thomas Gleixner <[email protected]>
Acked-by: Oleg Nesterov <[email protected]>
Cc: Ricardo Neri <[email protected]>
Cc: Francis Deslauriers <[email protected]>
Cc: Alexei Starovoitov <[email protected]>
Cc: Steven Rostedt <[email protected]>
Cc: Andy Lutomirski <[email protected]>
Cc: "H . Peter Anvin" <[email protected]>
Cc: Yonghong Song <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: "David S . Miller" <[email protected]>
Link: https://lkml.kernel.org/r/152587072544.17316.5950935243917346341.stgit@devbox
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/kernel/uprobes.c | 4 ++++
1 file changed, 4 insertions(+)
--- a/arch/x86/kernel/uprobes.c
+++ b/arch/x86/kernel/uprobes.c
@@ -296,6 +296,10 @@ static int uprobe_init_insn(struct arch_
if (is_prefix_bad(insn))
return -ENOTSUPP;
+ /* We should not singlestep on the exception masking instructions */
+ if (insn_masking_exception(insn))
+ return -ENOTSUPP;
+
if (x86_64)
good_insns = good_insns_64;
else
From: Tomasz Nowicki <[email protected]>
[ Upstream commit b860801e3237ec4c74cf8de0be4816996757ae5c ]
For non-VHE systems host kernel runs at EL1 and jumps to EL2 whenever
hypervisor code should be executed. In this case ETM4x driver must
restrict configuration to EL1 when it setups kernel tracing.
However, there is no separate hypervisor privilege level when VHE
is enabled, the host kernel runs at EL2.
This patch fixes configuration of TRCACATRn register for VHE systems
so that ETM_EXLEVEL_NS_HYP bit is used instead of ETM_EXLEVEL_NS_OS
to on/off kernel tracing. At the same time, it moves common code
to new helper.
Signed-off-by: Tomasz Nowicki <[email protected]>
Signed-off-by: Mathieu Poirier <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/hwtracing/coresight/coresight-etm4x.c | 40 +++++++++----------
1 file changed, 20 insertions(+), 20 deletions(-)
diff --git a/drivers/hwtracing/coresight/coresight-etm4x.c b/drivers/hwtracing/coresight/coresight-etm4x.c
index 44d6c29e26448..22079f886f452 100644
--- a/drivers/hwtracing/coresight/coresight-etm4x.c
+++ b/drivers/hwtracing/coresight/coresight-etm4x.c
@@ -35,6 +35,7 @@
#include <linux/pm_runtime.h>
#include <asm/sections.h>
#include <asm/local.h>
+#include <asm/virt.h>
#include "coresight-etm4x.h"
#include "coresight-etm-perf.h"
@@ -615,7 +616,7 @@ static void etm4_set_default_config(struct etmv4_config *config)
config->vinst_ctrl |= BIT(0);
}
-static u64 etm4_get_access_type(struct etmv4_config *config)
+static u64 etm4_get_ns_access_type(struct etmv4_config *config)
{
u64 access_type = 0;
@@ -626,17 +627,26 @@ static u64 etm4_get_access_type(struct etmv4_config *config)
* Bit[13] Exception level 1 - OS
* Bit[14] Exception level 2 - Hypervisor
* Bit[15] Never implemented
- *
- * Always stay away from hypervisor mode.
*/
- access_type = ETM_EXLEVEL_NS_HYP;
-
- if (config->mode & ETM_MODE_EXCL_KERN)
- access_type |= ETM_EXLEVEL_NS_OS;
+ if (!is_kernel_in_hyp_mode()) {
+ /* Stay away from hypervisor mode for non-VHE */
+ access_type = ETM_EXLEVEL_NS_HYP;
+ if (config->mode & ETM_MODE_EXCL_KERN)
+ access_type |= ETM_EXLEVEL_NS_OS;
+ } else if (config->mode & ETM_MODE_EXCL_KERN) {
+ access_type = ETM_EXLEVEL_NS_HYP;
+ }
if (config->mode & ETM_MODE_EXCL_USER)
access_type |= ETM_EXLEVEL_NS_APP;
+ return access_type;
+}
+
+static u64 etm4_get_access_type(struct etmv4_config *config)
+{
+ u64 access_type = etm4_get_ns_access_type(config);
+
/*
* EXLEVEL_S, bits[11:8], don't trace anything happening
* in secure state.
@@ -890,20 +900,10 @@ void etm4_config_trace_mode(struct etmv4_config *config)
addr_acc = config->addr_acc[ETM_DEFAULT_ADDR_COMP];
/* clear default config */
- addr_acc &= ~(ETM_EXLEVEL_NS_APP | ETM_EXLEVEL_NS_OS);
+ addr_acc &= ~(ETM_EXLEVEL_NS_APP | ETM_EXLEVEL_NS_OS |
+ ETM_EXLEVEL_NS_HYP);
- /*
- * EXLEVEL_NS, bits[15:12]
- * The Exception levels are:
- * Bit[12] Exception level 0 - Application
- * Bit[13] Exception level 1 - OS
- * Bit[14] Exception level 2 - Hypervisor
- * Bit[15] Never implemented
- */
- if (mode & ETM_MODE_EXCL_KERN)
- addr_acc |= ETM_EXLEVEL_NS_OS;
- else
- addr_acc |= ETM_EXLEVEL_NS_APP;
+ addr_acc |= etm4_get_ns_access_type(config);
config->addr_acc[ETM_DEFAULT_ADDR_COMP] = addr_acc;
config->addr_acc[ETM_DEFAULT_ADDR_COMP + 1] = addr_acc;
--
2.20.1
From: Rob Herring <[email protected]>
[ Upstream commit 53dd9dce6979bc54d64a3a09a2fb20187a025be7 ]
The next update of libfdt has a new dependency on INT_MAX. Update the
instances of libfdt_env.h in the kernel to either include the necessary
header with the definition or define it locally.
Cc: Russell King <[email protected]>
Cc: Benjamin Herrenschmidt <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Michael Ellerman <[email protected]>
Cc: [email protected]
Cc: [email protected]
Signed-off-by: Rob Herring <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm/boot/compressed/libfdt_env.h | 2 ++
arch/powerpc/boot/libfdt_env.h | 2 ++
include/linux/libfdt_env.h | 1 +
3 files changed, 5 insertions(+)
diff --git a/arch/arm/boot/compressed/libfdt_env.h b/arch/arm/boot/compressed/libfdt_env.h
index 17ae0f3efac8e..005bf4ff1b4cb 100644
--- a/arch/arm/boot/compressed/libfdt_env.h
+++ b/arch/arm/boot/compressed/libfdt_env.h
@@ -5,6 +5,8 @@
#include <linux/string.h>
#include <asm/byteorder.h>
+#define INT_MAX ((int)(~0U>>1))
+
typedef __be16 fdt16_t;
typedef __be32 fdt32_t;
typedef __be64 fdt64_t;
diff --git a/arch/powerpc/boot/libfdt_env.h b/arch/powerpc/boot/libfdt_env.h
index 7e3789ea396b8..0b3db6322c793 100644
--- a/arch/powerpc/boot/libfdt_env.h
+++ b/arch/powerpc/boot/libfdt_env.h
@@ -4,6 +4,8 @@
#include <types.h>
#include <string.h>
+#define INT_MAX ((int)(~0U>>1))
+
#include "of.h"
typedef u32 uint32_t;
diff --git a/include/linux/libfdt_env.h b/include/linux/libfdt_env.h
index 2a663c6bb4285..8850e243c9406 100644
--- a/include/linux/libfdt_env.h
+++ b/include/linux/libfdt_env.h
@@ -1,6 +1,7 @@
#ifndef _LIBFDT_ENV_H
#define _LIBFDT_ENV_H
+#include <linux/kernel.h> /* For INT_MAX */
#include <linux/string.h>
#include <asm/byteorder.h>
--
2.20.1
From: Stefan Agner <[email protected]>
[ Upstream commit c785896b21dd8e156326ff660050b0074d3431df ]
The table id (second) argument to MODULE_DEVICE_TABLE is often
referenced otherwise. This is not the case for CPU features. This
leads to warnings when building the kernel with Clang:
arch/arm/crypto/aes-ce-glue.c:450:1: warning: variable
'cpu_feature_match_AES' is not needed and will not be emitted
[-Wunneeded-internal-declaration]
module_cpu_feature_match(AES, aes_init);
^
Avoid warnings by using __maybe_unused, similar to commit 1f318a8bafcf
("modules: mark __inittest/__exittest as __maybe_unused").
Fixes: 67bad2fdb754 ("cpu: add generic support for CPU feature based module autoloading")
Signed-off-by: Stefan Agner <[email protected]>
Acked-by: Ard Biesheuvel <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
include/linux/cpufeature.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/include/linux/cpufeature.h b/include/linux/cpufeature.h
index 986c06c88d814..84d3c81b59781 100644
--- a/include/linux/cpufeature.h
+++ b/include/linux/cpufeature.h
@@ -45,7 +45,7 @@
* 'asm/cpufeature.h' of your favorite architecture.
*/
#define module_cpu_feature_match(x, __initfunc) \
-static struct cpu_feature const cpu_feature_match_ ## x[] = \
+static struct cpu_feature const __maybe_unused cpu_feature_match_ ## x[] = \
{ { .feature = cpu_feature(x) }, { } }; \
MODULE_DEVICE_TABLE(cpu, cpu_feature_match_ ## x); \
\
--
2.20.1
From: Linus Walleij <[email protected]>
[ Upstream commit ecde29569e3484e1d0a032bf4074449bce4d4a03 ]
The "lcdaclk_b_1" group is muxed with the function "lcd"
but needs a separate entry to be muxed in with "lcda"
rather than "lcd".
Signed-off-by: Linus Walleij <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm/boot/dts/ste-href-family-pinctrl.dtsi | 8 ++++++--
1 file changed, 6 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/ste-href-family-pinctrl.dtsi b/arch/arm/boot/dts/ste-href-family-pinctrl.dtsi
index 5c5cea232743d..1ec193b0c5065 100644
--- a/arch/arm/boot/dts/ste-href-family-pinctrl.dtsi
+++ b/arch/arm/boot/dts/ste-href-family-pinctrl.dtsi
@@ -607,16 +607,20 @@
mcde {
lcd_default_mode: lcd_default {
- default_mux {
+ default_mux1 {
/* Mux in VSI0 and all the data lines */
function = "lcd";
groups =
"lcdvsi0_a_1", /* VSI0 for LCD */
"lcd_d0_d7_a_1", /* Data lines */
"lcd_d8_d11_a_1", /* TV-out */
- "lcdaclk_b_1", /* Clock line for TV-out */
"lcdvsi1_a_1"; /* VSI1 for HDMI */
};
+ default_mux2 {
+ function = "lcda";
+ groups =
+ "lcdaclk_b_1"; /* Clock line for TV-out */
+ };
default_cfg1 {
pins =
"GPIO68_E1", /* VSI0 */
--
2.20.1
From: Masami Hiramatsu <[email protected]>
commit ee6a7354a3629f9b65bc18dbe393503e9440d6f5 upstream.
Since MOV SS and POP SS instructions will delay the exceptions until the
next instruction is executed, single-stepping on it by kprobes must be
prohibited.
However, kprobes usually executes those instructions directly on trampoline
buffer (a.k.a. kprobe-booster), except for the kprobes which has
post_handler. Thus if kprobe user probes MOV SS with post_handler, it will
do single-stepping on the MOV SS.
This means it is safe that if it is used via ftrace or perf/bpf since those
don't use the post_handler.
Anyway, since the stack switching is a rare case, it is safer just
rejecting kprobes on such instructions.
Signed-off-by: Masami Hiramatsu <[email protected]>
Signed-off-by: Thomas Gleixner <[email protected]>
Cc: Ricardo Neri <[email protected]>
Cc: Francis Deslauriers <[email protected]>
Cc: Oleg Nesterov <[email protected]>
Cc: Alexei Starovoitov <[email protected]>
Cc: Steven Rostedt <[email protected]>
Cc: Andy Lutomirski <[email protected]>
Cc: "H . Peter Anvin" <[email protected]>
Cc: Yonghong Song <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: "David S . Miller" <[email protected]>
Link: https://lkml.kernel.org/r/152587069574.17316.3311695234863248641.stgit@devbox
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/include/asm/insn.h | 18 ++++++++++++++++++
arch/x86/kernel/kprobes/core.c | 4 ++++
2 files changed, 22 insertions(+)
--- a/arch/x86/include/asm/insn.h
+++ b/arch/x86/include/asm/insn.h
@@ -208,4 +208,22 @@ static inline int insn_offset_immediate(
return insn_offset_displacement(insn) + insn->displacement.nbytes;
}
+#define POP_SS_OPCODE 0x1f
+#define MOV_SREG_OPCODE 0x8e
+
+/*
+ * Intel SDM Vol.3A 6.8.3 states;
+ * "Any single-step trap that would be delivered following the MOV to SS
+ * instruction or POP to SS instruction (because EFLAGS.TF is 1) is
+ * suppressed."
+ * This function returns true if @insn is MOV SS or POP SS. On these
+ * instructions, single stepping is suppressed.
+ */
+static inline int insn_masking_exception(struct insn *insn)
+{
+ return insn->opcode.bytes[0] == POP_SS_OPCODE ||
+ (insn->opcode.bytes[0] == MOV_SREG_OPCODE &&
+ X86_MODRM_REG(insn->modrm.bytes[0]) == 2);
+}
+
#endif /* _ASM_X86_INSN_H */
--- a/arch/x86/kernel/kprobes/core.c
+++ b/arch/x86/kernel/kprobes/core.c
@@ -376,6 +376,10 @@ int __copy_instruction(u8 *dest, u8 *src
return 0;
memcpy(dest, insn.kaddr, length);
+ /* We should not singlestep on the exception masking instructions */
+ if (insn_masking_exception(&insn))
+ return 0;
+
#ifdef CONFIG_X86_64
if (insn_rip_relative(&insn)) {
s64 newdisp;
From: Rajeev Kumar Sirasanagandla <[email protected]>
[ Upstream commit 7417844b63d4b0dc8ab23f88259bf95de7d09b57 ]
When REGULATORY_COUNTRY_IE_IGNORE is set, __reg_process_hint_country_ie()
ignores the country code change request from __cfg80211_connect_result()
via regulatory_hint_country_ie().
After Disconnect, similar to above, country code should not be reset to
world when country IE ignore is set. But this is violated and restore of
regulatory settings is invoked by cfg80211_disconnect_work via
regulatory_hint_disconnect().
To address this, avoid regulatory restore from regulatory_hint_disconnect()
when COUNTRY_IE_IGNORE is set.
Note: Currently, restore_regulatory_settings() takes care of clearing
beacon hints. But in the proposed change, regulatory restore is avoided.
Therefore, explicitly clear beacon hints when DISABLE_BEACON_HINTS
is not set.
Signed-off-by: Rajeev Kumar Sirasanagandla <[email protected]>
Signed-off-by: Johannes Berg <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/wireless/reg.c | 46 ++++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 46 insertions(+)
diff --git a/net/wireless/reg.c b/net/wireless/reg.c
index 44befe9f9ff08..dde741f298de7 100644
--- a/net/wireless/reg.c
+++ b/net/wireless/reg.c
@@ -2616,8 +2616,54 @@ static void restore_regulatory_settings(bool reset_user)
schedule_work(®_work);
}
+static bool is_wiphy_all_set_reg_flag(enum ieee80211_regulatory_flags flag)
+{
+ struct cfg80211_registered_device *rdev;
+ struct wireless_dev *wdev;
+
+ list_for_each_entry(rdev, &cfg80211_rdev_list, list) {
+ list_for_each_entry(wdev, &rdev->wiphy.wdev_list, list) {
+ wdev_lock(wdev);
+ if (!(wdev->wiphy->regulatory_flags & flag)) {
+ wdev_unlock(wdev);
+ return false;
+ }
+ wdev_unlock(wdev);
+ }
+ }
+
+ return true;
+}
+
void regulatory_hint_disconnect(void)
{
+ /* Restore of regulatory settings is not required when wiphy(s)
+ * ignore IE from connected access point but clearance of beacon hints
+ * is required when wiphy(s) supports beacon hints.
+ */
+ if (is_wiphy_all_set_reg_flag(REGULATORY_COUNTRY_IE_IGNORE)) {
+ struct reg_beacon *reg_beacon, *btmp;
+
+ if (is_wiphy_all_set_reg_flag(REGULATORY_DISABLE_BEACON_HINTS))
+ return;
+
+ spin_lock_bh(®_pending_beacons_lock);
+ list_for_each_entry_safe(reg_beacon, btmp,
+ ®_pending_beacons, list) {
+ list_del(®_beacon->list);
+ kfree(reg_beacon);
+ }
+ spin_unlock_bh(®_pending_beacons_lock);
+
+ list_for_each_entry_safe(reg_beacon, btmp,
+ ®_beacon_list, list) {
+ list_del(®_beacon->list);
+ kfree(reg_beacon);
+ }
+
+ return;
+ }
+
pr_debug("All devices are disconnected, going to restore regulatory settings\n");
restore_regulatory_settings(false);
}
--
2.20.1
From: Loic Poulain <[email protected]>
[ Upstream commit 59739131e0ca06db7560f9073fff2fb83f6bc2a5 ]
At OTG work running time, it's possible that several events need to be
addressed (e.g. ID and VBUS events). The current implementation handles
only one event at a time which leads to ignoring the other one. Fix it.
Signed-off-by: Loic Poulain <[email protected]>
Signed-off-by: Peter Chen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/usb/chipidea/otg.c | 9 ++++++---
1 file changed, 6 insertions(+), 3 deletions(-)
diff --git a/drivers/usb/chipidea/otg.c b/drivers/usb/chipidea/otg.c
index f36a1ac3bfbdf..b8650210be0f7 100644
--- a/drivers/usb/chipidea/otg.c
+++ b/drivers/usb/chipidea/otg.c
@@ -206,14 +206,17 @@ static void ci_otg_work(struct work_struct *work)
}
pm_runtime_get_sync(ci->dev);
+
if (ci->id_event) {
ci->id_event = false;
ci_handle_id_switch(ci);
- } else if (ci->b_sess_valid_event) {
+ }
+
+ if (ci->b_sess_valid_event) {
ci->b_sess_valid_event = false;
ci_handle_vbus_change(ci);
- } else
- dev_err(ci->dev, "unexpected event occurs at %s\n", __func__);
+ }
+
pm_runtime_put_sync(ci->dev);
enable_irq(ci->irq);
--
2.20.1
From: Christian Lamparter <[email protected]>
[ Upstream commit bd73a3dd257fb838bd456a18eeee0ef0224b7a40 ]
while compiling an ipq4019 target, dtc will complain:
regulator@b089000 unit address format error, expected "2089000"
The saw0 regulator reg value seems to be
copied and pasted from qcom-ipq8064.dtsi.
This patch fixes the reg value to match that of the
unit address which in turn silences the warning.
(There is no driver for qcom,saw2 right now.
So this went unnoticed)
Signed-off-by: Christian Lamparter <[email protected]>
Signed-off-by: John Crispin <[email protected]>
Signed-off-by: Andy Gross <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm/boot/dts/qcom-ipq4019.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/qcom-ipq4019.dtsi b/arch/arm/boot/dts/qcom-ipq4019.dtsi
index 4b7d97275c621..5ee84e3cb3e97 100644
--- a/arch/arm/boot/dts/qcom-ipq4019.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi
@@ -211,7 +211,7 @@
saw0: regulator@b089000 {
compatible = "qcom,saw2";
- reg = <0x02089000 0x1000>, <0x0b009000 0x1000>;
+ reg = <0x0b089000 0x1000>, <0x0b009000 0x1000>;
regulator;
};
--
2.20.1
From: Masami Hiramatsu <[email protected]>
[ Upstream commit cbdd96f5586151e48317d90a403941ec23f12660 ]
Instead of calling BUG_ON(), if we find a kprobe in use on free kprobe
list, just remove it from the list and keep it on kprobe hash list
as same as other in-use kprobes.
Signed-off-by: Masami Hiramatsu <[email protected]>
Cc: Anil S Keshavamurthy <[email protected]>
Cc: David S . Miller <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Naveen N . Rao <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Link: http://lkml.kernel.org/r/153666126882.21306.10738207224288507996.stgit@devbox
Signed-off-by: Ingo Molnar <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
kernel/kprobes.c | 8 +++++++-
1 file changed, 7 insertions(+), 1 deletion(-)
diff --git a/kernel/kprobes.c b/kernel/kprobes.c
index 11863e2b01c25..1b75fb8c7735e 100644
--- a/kernel/kprobes.c
+++ b/kernel/kprobes.c
@@ -514,8 +514,14 @@ static void do_free_cleaned_kprobes(void)
struct optimized_kprobe *op, *tmp;
list_for_each_entry_safe(op, tmp, &freeing_list, list) {
- BUG_ON(!kprobe_unused(&op->kp));
list_del_init(&op->list);
+ if (WARN_ON_ONCE(!kprobe_unused(&op->kp))) {
+ /*
+ * This must not happen, but if there is a kprobe
+ * still in use, keep it on kprobes hash list.
+ */
+ continue;
+ }
free_aggr_kprobe(&op->kp);
}
}
--
2.20.1
From: Geert Uytterhoeven <[email protected]>
[ Upstream commit 2f217d24ecaec2012e628d21e244eef0608656a4 ]
The unit address of the Cortex-A9 SCU device node contains one zero too
many. Remove it.
Signed-off-by: Geert Uytterhoeven <[email protected]>
Signed-off-by: Linus Walleij <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm/boot/dts/ste-dbx5x0.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/ste-dbx5x0.dtsi b/arch/arm/boot/dts/ste-dbx5x0.dtsi
index d309314f3a364..45869c3234358 100644
--- a/arch/arm/boot/dts/ste-dbx5x0.dtsi
+++ b/arch/arm/boot/dts/ste-dbx5x0.dtsi
@@ -188,7 +188,7 @@
<0xa0410100 0x100>;
};
- scu@a04100000 {
+ scu@a0410000 {
compatible = "arm,cortex-a9-scu";
reg = <0xa0410000 0x100>;
};
--
2.20.1
From: George Kennedy <[email protected]>
[ Upstream commit 288315e95264b6355e26609e9dec5dc4563d4ab0 ]
sym_int_sir() in sym_hipd.c does not check the command pointer for NULL before
using it in debug message prints.
Suggested-by: Matthew Wilcox <[email protected]>
Signed-off-by: George Kennedy <[email protected]>
Reviewed-by: Mark Kanda <[email protected]>
Acked-by: Matthew Wilcox <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/scsi/sym53c8xx_2/sym_hipd.c | 15 +++++++++++----
1 file changed, 11 insertions(+), 4 deletions(-)
diff --git a/drivers/scsi/sym53c8xx_2/sym_hipd.c b/drivers/scsi/sym53c8xx_2/sym_hipd.c
index c6425e3df5a04..f1c7714377524 100644
--- a/drivers/scsi/sym53c8xx_2/sym_hipd.c
+++ b/drivers/scsi/sym53c8xx_2/sym_hipd.c
@@ -4371,6 +4371,13 @@ static void sym_nego_rejected(struct sym_hcb *np, struct sym_tcb *tp, struct sym
OUTB(np, HS_PRT, HS_BUSY);
}
+#define sym_printk(lvl, tp, cp, fmt, v...) do { \
+ if (cp) \
+ scmd_printk(lvl, cp->cmd, fmt, ##v); \
+ else \
+ starget_printk(lvl, tp->starget, fmt, ##v); \
+} while (0)
+
/*
* chip exception handler for programmed interrupts.
*/
@@ -4416,7 +4423,7 @@ static void sym_int_sir(struct sym_hcb *np)
* been selected with ATN. We do not want to handle that.
*/
case SIR_SEL_ATN_NO_MSG_OUT:
- scmd_printk(KERN_WARNING, cp->cmd,
+ sym_printk(KERN_WARNING, tp, cp,
"No MSG OUT phase after selection with ATN\n");
goto out_stuck;
/*
@@ -4424,7 +4431,7 @@ static void sym_int_sir(struct sym_hcb *np)
* having reselected the initiator.
*/
case SIR_RESEL_NO_MSG_IN:
- scmd_printk(KERN_WARNING, cp->cmd,
+ sym_printk(KERN_WARNING, tp, cp,
"No MSG IN phase after reselection\n");
goto out_stuck;
/*
@@ -4432,7 +4439,7 @@ static void sym_int_sir(struct sym_hcb *np)
* an IDENTIFY.
*/
case SIR_RESEL_NO_IDENTIFY:
- scmd_printk(KERN_WARNING, cp->cmd,
+ sym_printk(KERN_WARNING, tp, cp,
"No IDENTIFY after reselection\n");
goto out_stuck;
/*
@@ -4461,7 +4468,7 @@ static void sym_int_sir(struct sym_hcb *np)
case SIR_RESEL_ABORTED:
np->lastmsg = np->msgout[0];
np->msgout[0] = M_NOOP;
- scmd_printk(KERN_WARNING, cp->cmd,
+ sym_printk(KERN_WARNING, tp, cp,
"message %x sent on bad reselection\n", np->lastmsg);
goto out;
/*
--
2.20.1
From: Paul Cercueil <[email protected]>
[ Upstream commit c558ecd21c852c97ff98dc6c61f715ba420ec251 ]
If we make this driver depend on MACH_JZ4780, that means it can be
enabled only if we're building a kernel specially crafted for a
JZ4780-based board, while most GNU/Linux distributions will want one
generic MIPS kernel that works on multiple boards.
Signed-off-by: Paul Cercueil <[email protected]>
Signed-off-by: Vinod Koul <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/dma/Kconfig | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/dma/Kconfig b/drivers/dma/Kconfig
index 141aefbe37ec9..b0f798244a897 100644
--- a/drivers/dma/Kconfig
+++ b/drivers/dma/Kconfig
@@ -120,7 +120,7 @@ config DMA_JZ4740
config DMA_JZ4780
tristate "JZ4780 DMA support"
- depends on MACH_JZ4780 || COMPILE_TEST
+ depends on MIPS || COMPILE_TEST
select DMA_ENGINE
select DMA_VIRTUAL_CHANNELS
help
--
2.20.1
From: Felix Fietkau <[email protected]>
[ Upstream commit 6df0580be8bc30803c4d8b2ed9c2230a2740c795 ]
Various documented examples on how to set up tx99 with ath9k rely
on setting up a regular monitor interface for setting the channel.
My previous patch "ath9k: fix tx99 with monitor mode interface" made
it possible to set it up this way again. However, it was removing support
for using an active monitor interface, which is required for controlling
the bitrate as well, since the bitrate is not passed down with a regular
monitor interface.
This patch partially reverts the previous one, but keeps support for using
a regular monitor interface to keep documented steps working in cases
where the bitrate does not matter
Fixes: d9c52fd17cb48 ("ath9k: fix tx99 with monitor mode interface")
Signed-off-by: Felix Fietkau <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/ath/ath9k/ath9k.h | 1 +
drivers/net/wireless/ath/ath9k/main.c | 10 ++++++++--
drivers/net/wireless/ath/ath9k/tx99.c | 7 +++++++
drivers/net/wireless/ath/ath9k/xmit.c | 2 +-
4 files changed, 17 insertions(+), 3 deletions(-)
diff --git a/drivers/net/wireless/ath/ath9k/ath9k.h b/drivers/net/wireless/ath/ath9k/ath9k.h
index 51e878a9d5211..7bda18c61eb6e 100644
--- a/drivers/net/wireless/ath/ath9k/ath9k.h
+++ b/drivers/net/wireless/ath/ath9k/ath9k.h
@@ -1033,6 +1033,7 @@ struct ath_softc {
struct ath_spec_scan_priv spec_priv;
+ struct ieee80211_vif *tx99_vif;
struct sk_buff *tx99_skb;
bool tx99_state;
s16 tx99_power;
diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c
index fbc34beee1580..f6151a00041d6 100644
--- a/drivers/net/wireless/ath/ath9k/main.c
+++ b/drivers/net/wireless/ath/ath9k/main.c
@@ -1249,8 +1249,13 @@ static int ath9k_add_interface(struct ieee80211_hw *hw,
struct ath_vif *avp = (void *)vif->drv_priv;
struct ath_node *an = &avp->mcast_node;
- if (IS_ENABLED(CONFIG_ATH9K_TX99))
- return -EOPNOTSUPP;
+ if (IS_ENABLED(CONFIG_ATH9K_TX99)) {
+ if (sc->cur_chan->nvifs >= 1) {
+ mutex_unlock(&sc->mutex);
+ return -EOPNOTSUPP;
+ }
+ sc->tx99_vif = vif;
+ }
mutex_lock(&sc->mutex);
@@ -1335,6 +1340,7 @@ static void ath9k_remove_interface(struct ieee80211_hw *hw,
ath9k_p2p_remove_vif(sc, vif);
sc->cur_chan->nvifs--;
+ sc->tx99_vif = NULL;
if (!ath9k_is_chanctx_enabled())
list_del(&avp->list);
diff --git a/drivers/net/wireless/ath/ath9k/tx99.c b/drivers/net/wireless/ath/ath9k/tx99.c
index 0cb5b2a873be8..096902e0fdf5c 100644
--- a/drivers/net/wireless/ath/ath9k/tx99.c
+++ b/drivers/net/wireless/ath/ath9k/tx99.c
@@ -54,6 +54,7 @@ static struct sk_buff *ath9k_build_tx99_skb(struct ath_softc *sc)
struct ieee80211_hdr *hdr;
struct ieee80211_tx_info *tx_info;
struct sk_buff *skb;
+ struct ath_vif *avp;
skb = alloc_skb(len, GFP_KERNEL);
if (!skb)
@@ -71,11 +72,17 @@ static struct sk_buff *ath9k_build_tx99_skb(struct ath_softc *sc)
memcpy(hdr->addr2, hw->wiphy->perm_addr, ETH_ALEN);
memcpy(hdr->addr3, hw->wiphy->perm_addr, ETH_ALEN);
+ if (sc->tx99_vif) {
+ avp = (struct ath_vif *) sc->tx99_vif->drv_priv;
+ hdr->seq_ctrl |= cpu_to_le16(avp->seq_no);
+ }
+
tx_info = IEEE80211_SKB_CB(skb);
memset(tx_info, 0, sizeof(*tx_info));
rate = &tx_info->control.rates[0];
tx_info->band = sc->cur_chan->chandef.chan->band;
tx_info->flags = IEEE80211_TX_CTL_NO_ACK;
+ tx_info->control.vif = sc->tx99_vif;
rate->count = 1;
if (ah->curchan && IS_CHAN_HT(ah->curchan)) {
rate->flags |= IEEE80211_TX_RC_MCS;
diff --git a/drivers/net/wireless/ath/ath9k/xmit.c b/drivers/net/wireless/ath/ath9k/xmit.c
index 2c35819f65426..0ef27d99bef33 100644
--- a/drivers/net/wireless/ath/ath9k/xmit.c
+++ b/drivers/net/wireless/ath/ath9k/xmit.c
@@ -2970,7 +2970,7 @@ int ath9k_tx99_send(struct ath_softc *sc, struct sk_buff *skb,
return -EINVAL;
}
- ath_set_rates(NULL, NULL, bf);
+ ath_set_rates(sc->tx99_vif, NULL, bf);
ath9k_hw_set_desc_link(sc->sc_ah, bf->bf_desc, bf->bf_daddr);
ath9k_hw_tx99_start(sc->sc_ah, txctl->txq->axq_qnum);
--
2.20.1
From: YueHaibing <[email protected]>
[ Upstream commit 6323d57f335ce1490d025cacc83fc10b07792130 ]
The method ndo_start_xmit() is defined as returning an 'netdev_tx_t',
which is a typedef for an enum type, so make sure the implementation in
this driver has returns 'netdev_tx_t' value, and change the function
return type to netdev_tx_t.
Found by coccinelle.
Signed-off-by: YueHaibing <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/smsc/smc911x.c | 3 ++-
drivers/net/ethernet/smsc/smc91x.c | 3 ++-
drivers/net/ethernet/smsc/smsc911x.c | 3 ++-
3 files changed, 6 insertions(+), 3 deletions(-)
diff --git a/drivers/net/ethernet/smsc/smc911x.c b/drivers/net/ethernet/smsc/smc911x.c
index cb49c9654f0a7..323b3ac16bc0e 100644
--- a/drivers/net/ethernet/smsc/smc911x.c
+++ b/drivers/net/ethernet/smsc/smc911x.c
@@ -514,7 +514,8 @@ static void smc911x_hardware_send_pkt(struct net_device *dev)
* now, or set the card to generates an interrupt when ready
* for the packet.
*/
-static int smc911x_hard_start_xmit(struct sk_buff *skb, struct net_device *dev)
+static netdev_tx_t
+smc911x_hard_start_xmit(struct sk_buff *skb, struct net_device *dev)
{
struct smc911x_local *lp = netdev_priv(dev);
unsigned int free;
diff --git a/drivers/net/ethernet/smsc/smc91x.c b/drivers/net/ethernet/smsc/smc91x.c
index 73212590d04a3..b0c72167badec 100644
--- a/drivers/net/ethernet/smsc/smc91x.c
+++ b/drivers/net/ethernet/smsc/smc91x.c
@@ -637,7 +637,8 @@ done: if (!THROTTLE_TX_PKTS)
* now, or set the card to generates an interrupt when ready
* for the packet.
*/
-static int smc_hard_start_xmit(struct sk_buff *skb, struct net_device *dev)
+static netdev_tx_t
+smc_hard_start_xmit(struct sk_buff *skb, struct net_device *dev)
{
struct smc_local *lp = netdev_priv(dev);
void __iomem *ioaddr = lp->base;
diff --git a/drivers/net/ethernet/smsc/smsc911x.c b/drivers/net/ethernet/smsc/smsc911x.c
index 734caa7a557be..4143659615e10 100644
--- a/drivers/net/ethernet/smsc/smsc911x.c
+++ b/drivers/net/ethernet/smsc/smsc911x.c
@@ -1776,7 +1776,8 @@ static int smsc911x_stop(struct net_device *dev)
}
/* Entry point for transmitting a packet */
-static int smsc911x_hard_start_xmit(struct sk_buff *skb, struct net_device *dev)
+static netdev_tx_t
+smsc911x_hard_start_xmit(struct sk_buff *skb, struct net_device *dev)
{
struct smsc911x_data *pdata = netdev_priv(dev);
unsigned int freespace;
--
2.20.1
From: Suzuki K Poulose <[email protected]>
[ Upstream commit c71369de02b285d9da526a526d8f2affc7b17c59 ]
The coresight components could be operated either in sysfs mode or in perf
mode. For some of the components, the mode of operation doesn't matter as
they simply relay the data to the next component in the trace path. But for
sinks, they need to be able to provide the trace data back to the user.
Thus we need to make sure that "mode" is handled appropriately. e.g,
the sysfs mode could have multiple sources driving the trace data, while
perf mode doesn't allow sharing the sink.
The coresight_enable_sink() however doesn't really allow this check to
trigger as it skips the "enable_sink" callback if the component is
already enabled, irrespective of the mode. This could cause mixing
of data from different modes or even same mode (in perf), if the
sources are different. Also, if we fail to enable the sink while
enabling a path (where sink is the first component enabled),
we could end up in disabling the components in the "entire"
path which were not enabled in this trial, causing disruptions
in the existing trace paths.
Cc: Mathieu Poirier <[email protected]>
Signed-off-by: Suzuki K Poulose <[email protected]>
Signed-off-by: Mathieu Poirier <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/hwtracing/coresight/coresight.c | 22 +++++++++++++++-------
1 file changed, 15 insertions(+), 7 deletions(-)
diff --git a/drivers/hwtracing/coresight/coresight.c b/drivers/hwtracing/coresight/coresight.c
index 398e44a9ec45d..5ffabc388630e 100644
--- a/drivers/hwtracing/coresight/coresight.c
+++ b/drivers/hwtracing/coresight/coresight.c
@@ -132,12 +132,14 @@ static int coresight_enable_sink(struct coresight_device *csdev, u32 mode)
{
int ret;
- if (!csdev->enable) {
- if (sink_ops(csdev)->enable) {
- ret = sink_ops(csdev)->enable(csdev, mode);
- if (ret)
- return ret;
- }
+ /*
+ * We need to make sure the "new" session is compatible with the
+ * existing "mode" of operation.
+ */
+ if (sink_ops(csdev)->enable) {
+ ret = sink_ops(csdev)->enable(csdev, mode);
+ if (ret)
+ return ret;
csdev->enable = true;
}
@@ -331,8 +333,14 @@ int coresight_enable_path(struct list_head *path, u32 mode)
switch (type) {
case CORESIGHT_DEV_TYPE_SINK:
ret = coresight_enable_sink(csdev, mode);
+ /*
+ * Sink is the first component turned on. If we
+ * failed to enable the sink, there are no components
+ * that need disabling. Disabling the path here
+ * would mean we could disrupt an existing session.
+ */
if (ret)
- goto err;
+ goto out;
break;
case CORESIGHT_DEV_TYPE_SOURCE:
/* sources are enabled from either sysFS or Perf */
--
2.20.1
From: Felix Fietkau <[email protected]>
[ Upstream commit d9c52fd17cb483bd8a470398afcb79f86c1b77c8 ]
Tx99 is typically configured via a monitor mode interface, which does
not get added to the driver as a vif. Since the code currently expects
a configured virtual interface for tx99, enabling tx99 via debugfs fails.
Since the vif is not needed anyway, remove all checks for it.
Signed-off-by: Felix Fietkau <[email protected]>
[[email protected]: s/CPTCFG/CONFIG/]
Signed-off-by: Kalle Valo <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/ath/ath9k/ath9k.h | 1 -
drivers/net/wireless/ath/ath9k/main.c | 12 +++---------
drivers/net/wireless/ath/ath9k/tx99.c | 9 ---------
drivers/net/wireless/ath/ath9k/xmit.c | 2 +-
4 files changed, 4 insertions(+), 20 deletions(-)
diff --git a/drivers/net/wireless/ath/ath9k/ath9k.h b/drivers/net/wireless/ath/ath9k/ath9k.h
index 7bda18c61eb6e..51e878a9d5211 100644
--- a/drivers/net/wireless/ath/ath9k/ath9k.h
+++ b/drivers/net/wireless/ath/ath9k/ath9k.h
@@ -1033,7 +1033,6 @@ struct ath_softc {
struct ath_spec_scan_priv spec_priv;
- struct ieee80211_vif *tx99_vif;
struct sk_buff *tx99_skb;
bool tx99_state;
s16 tx99_power;
diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c
index b868f02ced893..fbc34beee1580 100644
--- a/drivers/net/wireless/ath/ath9k/main.c
+++ b/drivers/net/wireless/ath/ath9k/main.c
@@ -1249,15 +1249,10 @@ static int ath9k_add_interface(struct ieee80211_hw *hw,
struct ath_vif *avp = (void *)vif->drv_priv;
struct ath_node *an = &avp->mcast_node;
- mutex_lock(&sc->mutex);
+ if (IS_ENABLED(CONFIG_ATH9K_TX99))
+ return -EOPNOTSUPP;
- if (IS_ENABLED(CONFIG_ATH9K_TX99)) {
- if (sc->cur_chan->nvifs >= 1) {
- mutex_unlock(&sc->mutex);
- return -EOPNOTSUPP;
- }
- sc->tx99_vif = vif;
- }
+ mutex_lock(&sc->mutex);
ath_dbg(common, CONFIG, "Attach a VIF of type: %d\n", vif->type);
sc->cur_chan->nvifs++;
@@ -1340,7 +1335,6 @@ static void ath9k_remove_interface(struct ieee80211_hw *hw,
ath9k_p2p_remove_vif(sc, vif);
sc->cur_chan->nvifs--;
- sc->tx99_vif = NULL;
if (!ath9k_is_chanctx_enabled())
list_del(&avp->list);
diff --git a/drivers/net/wireless/ath/ath9k/tx99.c b/drivers/net/wireless/ath/ath9k/tx99.c
index 8e9480cc33e15..0cb5b2a873be8 100644
--- a/drivers/net/wireless/ath/ath9k/tx99.c
+++ b/drivers/net/wireless/ath/ath9k/tx99.c
@@ -54,12 +54,6 @@ static struct sk_buff *ath9k_build_tx99_skb(struct ath_softc *sc)
struct ieee80211_hdr *hdr;
struct ieee80211_tx_info *tx_info;
struct sk_buff *skb;
- struct ath_vif *avp;
-
- if (!sc->tx99_vif)
- return NULL;
-
- avp = (struct ath_vif *)sc->tx99_vif->drv_priv;
skb = alloc_skb(len, GFP_KERNEL);
if (!skb)
@@ -77,14 +71,11 @@ static struct sk_buff *ath9k_build_tx99_skb(struct ath_softc *sc)
memcpy(hdr->addr2, hw->wiphy->perm_addr, ETH_ALEN);
memcpy(hdr->addr3, hw->wiphy->perm_addr, ETH_ALEN);
- hdr->seq_ctrl |= cpu_to_le16(avp->seq_no);
-
tx_info = IEEE80211_SKB_CB(skb);
memset(tx_info, 0, sizeof(*tx_info));
rate = &tx_info->control.rates[0];
tx_info->band = sc->cur_chan->chandef.chan->band;
tx_info->flags = IEEE80211_TX_CTL_NO_ACK;
- tx_info->control.vif = sc->tx99_vif;
rate->count = 1;
if (ah->curchan && IS_CHAN_HT(ah->curchan)) {
rate->flags |= IEEE80211_TX_RC_MCS;
diff --git a/drivers/net/wireless/ath/ath9k/xmit.c b/drivers/net/wireless/ath/ath9k/xmit.c
index 0ef27d99bef33..2c35819f65426 100644
--- a/drivers/net/wireless/ath/ath9k/xmit.c
+++ b/drivers/net/wireless/ath/ath9k/xmit.c
@@ -2970,7 +2970,7 @@ int ath9k_tx99_send(struct ath_softc *sc, struct sk_buff *skb,
return -EINVAL;
}
- ath_set_rates(sc->tx99_vif, NULL, bf);
+ ath_set_rates(NULL, NULL, bf);
ath9k_hw_set_desc_link(sc->sc_ah, bf->bf_desc, bf->bf_daddr);
ath9k_hw_tx99_start(sc->sc_ah, txctl->txq->axq_qnum);
--
2.20.1
From: Marek Szyprowski <[email protected]>
[ Upstream commit ef2ecab9af5feae97c47b7f61cdd96f7f49b2c23 ]
S5M8767 PMIC interrupt line on Exynos5250-based Arndale board has
external pull-up resistors, so disable any pull control for it in
in controller node. This fixes support for S5M8767 interrupts and
enables operation of wakeup from S5M8767 RTC alarm.
Signed-off-by: Marek Szyprowski <[email protected]>
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm/boot/dts/exynos5250-arndale.dts | 9 +++++++++
1 file changed, 9 insertions(+)
diff --git a/arch/arm/boot/dts/exynos5250-arndale.dts b/arch/arm/boot/dts/exynos5250-arndale.dts
index 6098dacd09f11..1b2709af2a42b 100644
--- a/arch/arm/boot/dts/exynos5250-arndale.dts
+++ b/arch/arm/boot/dts/exynos5250-arndale.dts
@@ -170,6 +170,8 @@
reg = <0x66>;
interrupt-parent = <&gpx3>;
interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&s5m8767_irq>;
vinb1-supply = <&main_dc_reg>;
vinb2-supply = <&main_dc_reg>;
@@ -547,6 +549,13 @@
cap-sd-highspeed;
};
+&pinctrl_0 {
+ s5m8767_irq: s5m8767-irq {
+ samsung,pins = "gpx3-2";
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ };
+};
+
&rtc {
status = "okay";
};
--
2.20.1
From: Banajit Goswami <[email protected]>
[ Upstream commit bdae566d5d9733b6e32b378668b84eadf28a94d4 ]
During component_bind_all(), if bind() fails for any
particular component associated with a master, unbind()
should be called for all previous components in that
master's match array, whose bind() might have completed
successfully. As per the current logic, if bind() fails
for the component at position 'n' in the master's match
array, it would start calling unbind() from component in
'n'th position itself and work backwards, and will always
skip calling unbind() for component in 0th position in the
master's match array.
Fix this by updating the loop condition, and the logic to
refer to the components in master's match array, so that
unbind() is called for all components starting from 'n-1'st
position in the array, until (and including) component in
0th position.
Signed-off-by: Banajit Goswami <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/base/component.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/base/component.c b/drivers/base/component.c
index 89b032f2ffd22..08da6160e94dd 100644
--- a/drivers/base/component.c
+++ b/drivers/base/component.c
@@ -461,9 +461,9 @@ int component_bind_all(struct device *master_dev, void *data)
}
if (ret != 0) {
- for (; i--; )
- if (!master->match->compare[i].duplicate) {
- c = master->match->compare[i].component;
+ for (; i > 0; i--)
+ if (!master->match->compare[i - 1].duplicate) {
+ c = master->match->compare[i - 1].component;
component_unbind(c, master, data);
}
}
--
2.20.1
From: Sara Sharon <[email protected]>
[ Upstream commit 1a19c139be18ed4d6d681049cc48586fae070120 ]
When we receive TX response, we may release a few packets
due to a hole that was closed in the transmission window.
However, if that frame failed, we will mark all the released
frames as failed and will send multiple BARs.
This affects statistics badly, and cause unnecessary frames
transmission.
Instead, mark all the following packets as success, with the
desired result of sending a bar for the failed frame only.
Signed-off-by: Sara Sharon <[email protected]>
Signed-off-by: Luca Coelho <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/intel/iwlwifi/mvm/tx.c | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/tx.c b/drivers/net/wireless/intel/iwlwifi/mvm/tx.c
index 1aa74b87599ff..63dcea640d076 100644
--- a/drivers/net/wireless/intel/iwlwifi/mvm/tx.c
+++ b/drivers/net/wireless/intel/iwlwifi/mvm/tx.c
@@ -1303,6 +1303,14 @@ static void iwl_mvm_rx_tx_cmd_single(struct iwl_mvm *mvm,
break;
}
+ /*
+ * If we are freeing multiple frames, mark all the frames
+ * but the first one as acked, since they were acknowledged
+ * before
+ * */
+ if (skb_freed > 1)
+ info->flags |= IEEE80211_TX_STAT_ACK;
+
iwl_mvm_tx_status_check_trigger(mvm, status);
info->status.rates[0].count = tx_resp->failure_frame + 1;
--
2.20.1
From: Marcel Ziswiler <[email protected]>
[ Upstream commit 8a1ecc01a473b75ab97be9b36f623e4551a6e9ae ]
There is one too many zeroes in the Power I2C base address. Fix this.
Signed-off-by: Marcel Ziswiler <[email protected]>
Signed-off-by: Robert Jarzmik <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm/boot/dts/pxa27x.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/pxa27x.dtsi b/arch/arm/boot/dts/pxa27x.dtsi
index 9e73dc6b3ed3e..0e1320afa1562 100644
--- a/arch/arm/boot/dts/pxa27x.dtsi
+++ b/arch/arm/boot/dts/pxa27x.dtsi
@@ -70,7 +70,7 @@
clocks = <&clks CLK_PWM1>;
};
- pwri2c: i2c@40f000180 {
+ pwri2c: i2c@40f00180 {
compatible = "mrvl,pxa-i2c";
reg = <0x40f00180 0x24>;
interrupts = <6>;
--
2.20.1
From: Joel Pepper <[email protected]>
[ Upstream commit cb2200f7af8341aaf0c6abd7ba37e4c667c41639 ]
While checks are in place to avoid attributes and children of a format
being manipulated after the format is linked into the streaming header,
the linked flag was never actually set, invalidating the protections.
Update the flag as appropriate in the header link calls.
Signed-off-by: Joel Pepper <[email protected]>
Reviewed-by: Kieran Bingham <[email protected]>
Signed-off-by: Laurent Pinchart <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/usb/gadget/function/uvc_configfs.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/usb/gadget/function/uvc_configfs.c b/drivers/usb/gadget/function/uvc_configfs.c
index 3803dda54666b..3d843e14447bb 100644
--- a/drivers/usb/gadget/function/uvc_configfs.c
+++ b/drivers/usb/gadget/function/uvc_configfs.c
@@ -772,6 +772,7 @@ static int uvcg_streaming_header_allow_link(struct config_item *src,
format_ptr->fmt = target_fmt;
list_add_tail(&format_ptr->entry, &src_hdr->formats);
++src_hdr->num_fmt;
+ ++target_fmt->linked;
out:
mutex_unlock(&opts->lock);
@@ -810,6 +811,8 @@ static int uvcg_streaming_header_drop_link(struct config_item *src,
break;
}
+ --target_fmt->linked;
+
out:
mutex_unlock(&opts->lock);
mutex_unlock(su_mutex);
--
2.20.1
From: Nathan Chancellor <[email protected]>
[ Upstream commit 4158757395b300b6eb308fc20b96d1d231484413 ]
Clang warns when one enumerated type is implicitly converted to another.
drivers/media/platform/davinci/vpbe_display.c:524:24: warning: implicit
conversion from enumeration type 'enum osd_v_exp_ratio' to different
enumeration type 'enum osd_h_exp_ratio' [-Wenum-conversion]
layer_info->h_exp = V_EXP_6_OVER_5;
~ ^~~~~~~~~~~~~~
1 warning generated.
This appears to be a copy and paste error judging from the couple of
lines directly above this statement and the way that height is handled
in the if block above this one.
Reported-by: Nick Desaulniers <[email protected]>
Signed-off-by: Nathan Chancellor <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/media/platform/davinci/vpbe_display.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/media/platform/davinci/vpbe_display.c b/drivers/media/platform/davinci/vpbe_display.c
index a9bc0175e4d3d..c839003953a74 100644
--- a/drivers/media/platform/davinci/vpbe_display.c
+++ b/drivers/media/platform/davinci/vpbe_display.c
@@ -518,7 +518,7 @@ vpbe_disp_calculate_scale_factor(struct vpbe_display *disp_dev,
else if (v_scale == 4)
layer_info->v_zoom = ZOOM_X4;
if (v_exp)
- layer_info->h_exp = V_EXP_6_OVER_5;
+ layer_info->v_exp = V_EXP_6_OVER_5;
} else {
/* no scaling, only cropping. Set display area to crop area */
cfg->ysize = expected_ysize;
--
2.20.1
From: Henry Lin <[email protected]>
commit 528699317dd6dc722dccc11b68800cf945109390 upstream.
While output urb's snd_complete_urb() is executing, calling
prepare_outbound_urb() may cause endpoint stopped before
prepare_outbound_urb() returns and result in next urb submitted
to stopped endpoint. usb-audio driver cannot re-use it afterwards as
the urb is still hold by usb stack.
This change checks EP_FLAG_RUNNING flag after prepare_outbound_urb() again
to let snd_complete_urb() know the endpoint already stopped and does not
submit next urb. Below kind of error will be fixed:
[ 213.153103] usb 1-2: timeout: still 1 active urbs on EP #1
[ 213.164121] usb 1-2: cannot submit urb 0, error -16: unknown error
Signed-off-by: Henry Lin <[email protected]>
Cc: <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
sound/usb/endpoint.c | 3 +++
1 file changed, 3 insertions(+)
--- a/sound/usb/endpoint.c
+++ b/sound/usb/endpoint.c
@@ -403,6 +403,9 @@ static void snd_complete_urb(struct urb
}
prepare_outbound_urb(ep, ctx);
+ /* can be stopped during prepare callback */
+ if (unlikely(!test_bit(EP_FLAG_RUNNING, &ep->flags)))
+ goto exit_clear;
} else {
retire_inbound_urb(ep, ctx);
/* can be stopped during retire callback */
From: Tamizh chelvam <[email protected]>
[ Upstream commit bd1d395070cca4f42a93e520b0597274789274a4 ]
When continuously running wifi up/down sequence, the napi poll
can be scheduled after the CE buffers being freed by ath10k_pci_flush
Steps:
In a certain condition, during wifi down below scenario might occur.
ath10k_stop->ath10k_hif_stop->napi_schedule->ath10k_pci_flush->napi_poll(napi_synchronize).
In the above scenario, CE buffer entries will be freed up and become NULL in
ath10k_pci_flush. And the napi_poll has been invoked after the flush process
and it will try to get the skb from the CE buffer entry and perform some action on that.
Since the CE buffer already cleaned by pci flush this action will create NULL
pointer dereference and trigger below kernel panic.
Unable to handle kernel NULL pointer dereference at virtual address 0000005c
PC is at ath10k_pci_htt_rx_cb+0x64/0x3ec [ath10k_pci]
ath10k_pci_htt_rx_cb [ath10k_pci]
ath10k_ce_per_engine_service+0x74/0xc4 [ath10k_pci]
ath10k_ce_per_engine_service [ath10k_pci]
ath10k_ce_per_engine_service_any+0x74/0x80 [ath10k_pci]
ath10k_ce_per_engine_service_any [ath10k_pci]
ath10k_pci_napi_poll+0x48/0xec [ath10k_pci]
ath10k_pci_napi_poll [ath10k_pci]
net_rx_action+0xac/0x160
net_rx_action
__do_softirq+0xdc/0x208
__do_softirq
irq_exit+0x84/0xe0
irq_exit
__handle_domain_irq+0x80/0xa0
__handle_domain_irq
gic_handle_irq+0x38/0x5c
gic_handle_irq
__irq_usr+0x44/0x60
Tested on QCA4019 and firmware version 10.4.3.2.1.1-00010
Signed-off-by: Tamizh chelvam <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/ath/ath10k/ahb.c | 4 ++--
drivers/net/wireless/ath/ath10k/pci.c | 2 +-
2 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/net/wireless/ath/ath10k/ahb.c b/drivers/net/wireless/ath/ath10k/ahb.c
index da770af830369..125b5c31b2b0a 100644
--- a/drivers/net/wireless/ath/ath10k/ahb.c
+++ b/drivers/net/wireless/ath/ath10k/ahb.c
@@ -658,10 +658,10 @@ static void ath10k_ahb_hif_stop(struct ath10k *ar)
ath10k_ahb_irq_disable(ar);
synchronize_irq(ar_ahb->irq);
- ath10k_pci_flush(ar);
-
napi_synchronize(&ar->napi);
napi_disable(&ar->napi);
+
+ ath10k_pci_flush(ar);
}
static int ath10k_ahb_hif_power_up(struct ath10k *ar)
diff --git a/drivers/net/wireless/ath/ath10k/pci.c b/drivers/net/wireless/ath/ath10k/pci.c
index 25b8d501d437e..b7bac14d1487b 100644
--- a/drivers/net/wireless/ath/ath10k/pci.c
+++ b/drivers/net/wireless/ath/ath10k/pci.c
@@ -1781,9 +1781,9 @@ static void ath10k_pci_hif_stop(struct ath10k *ar)
ath10k_pci_irq_disable(ar);
ath10k_pci_irq_sync(ar);
- ath10k_pci_flush(ar);
napi_synchronize(&ar->napi);
napi_disable(&ar->napi);
+ ath10k_pci_flush(ar);
spin_lock_irqsave(&ar_pci->ps_lock, flags);
WARN_ON(ar_pci->ps_wake_refcount > 0);
--
2.20.1
From: Oliver Neukum <[email protected]>
[ Upstream commit a9a51bd727d141a67b589f375fe69d0e54c4fe22 ]
If a malicious device gives a short MAC it can elicit up to
5 bytes of leaked memory out of the driver. We need to check for
ETH_ALEN instead.
Reported-by: [email protected]
Signed-off-by: Oliver Neukum <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/usb/ax88172a.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/net/usb/ax88172a.c
+++ b/drivers/net/usb/ax88172a.c
@@ -215,7 +215,7 @@ static int ax88172a_bind(struct usbnet *
/* Get the MAC address */
ret = asix_read_cmd(dev, AX_CMD_READ_NODE_ID, 0, 0, ETH_ALEN, buf, 0);
- if (ret < 0) {
+ if (ret < ETH_ALEN) {
netdev_err(dev->net, "Failed to read MAC address: %d\n", ret);
goto free;
}
From: YueHaibing <[email protected]>
[ Upstream commit fe72352e37ae8478f4c97975a9831f0c50f22e73 ]
The method ndo_start_xmit() is defined as returning an 'netdev_tx_t',
which is a typedef for an enum type, so make sure the implementation in
this driver has returns 'netdev_tx_t' value, and change the function
return type to netdev_tx_t.
Found by coccinelle.
Signed-off-by: YueHaibing <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/amd/am79c961a.c | 2 +-
drivers/net/ethernet/amd/atarilance.c | 6 ++++--
drivers/net/ethernet/amd/declance.c | 2 +-
drivers/net/ethernet/amd/sun3lance.c | 6 ++++--
drivers/net/ethernet/amd/sunlance.c | 2 +-
drivers/net/ethernet/amd/xgbe/xgbe-drv.c | 4 ++--
6 files changed, 13 insertions(+), 9 deletions(-)
diff --git a/drivers/net/ethernet/amd/am79c961a.c b/drivers/net/ethernet/amd/am79c961a.c
index fcdf5dda448f9..77d99c532917c 100644
--- a/drivers/net/ethernet/amd/am79c961a.c
+++ b/drivers/net/ethernet/amd/am79c961a.c
@@ -440,7 +440,7 @@ static void am79c961_timeout(struct net_device *dev)
/*
* Transmit a packet
*/
-static int
+static netdev_tx_t
am79c961_sendpacket(struct sk_buff *skb, struct net_device *dev)
{
struct dev_priv *priv = netdev_priv(dev);
diff --git a/drivers/net/ethernet/amd/atarilance.c b/drivers/net/ethernet/amd/atarilance.c
index d2bc8e5dcd23b..35a9f252ceb6c 100644
--- a/drivers/net/ethernet/amd/atarilance.c
+++ b/drivers/net/ethernet/amd/atarilance.c
@@ -339,7 +339,8 @@ static unsigned long lance_probe1( struct net_device *dev, struct lance_addr
*init_rec );
static int lance_open( struct net_device *dev );
static void lance_init_ring( struct net_device *dev );
-static int lance_start_xmit( struct sk_buff *skb, struct net_device *dev );
+static netdev_tx_t lance_start_xmit(struct sk_buff *skb,
+ struct net_device *dev);
static irqreturn_t lance_interrupt( int irq, void *dev_id );
static int lance_rx( struct net_device *dev );
static int lance_close( struct net_device *dev );
@@ -770,7 +771,8 @@ static void lance_tx_timeout (struct net_device *dev)
/* XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX */
-static int lance_start_xmit( struct sk_buff *skb, struct net_device *dev )
+static netdev_tx_t
+lance_start_xmit(struct sk_buff *skb, struct net_device *dev)
{
struct lance_private *lp = netdev_priv(dev);
struct lance_ioreg *IO = lp->iobase;
diff --git a/drivers/net/ethernet/amd/declance.c b/drivers/net/ethernet/amd/declance.c
index 9e80a76c3dfe1..76393ae4cf0aa 100644
--- a/drivers/net/ethernet/amd/declance.c
+++ b/drivers/net/ethernet/amd/declance.c
@@ -893,7 +893,7 @@ static void lance_tx_timeout(struct net_device *dev)
netif_wake_queue(dev);
}
-static int lance_start_xmit(struct sk_buff *skb, struct net_device *dev)
+static netdev_tx_t lance_start_xmit(struct sk_buff *skb, struct net_device *dev)
{
struct lance_private *lp = netdev_priv(dev);
volatile struct lance_regs *ll = lp->ll;
diff --git a/drivers/net/ethernet/amd/sun3lance.c b/drivers/net/ethernet/amd/sun3lance.c
index 3d8c6b2cdea4c..09271665712da 100644
--- a/drivers/net/ethernet/amd/sun3lance.c
+++ b/drivers/net/ethernet/amd/sun3lance.c
@@ -235,7 +235,8 @@ struct lance_private {
static int lance_probe( struct net_device *dev);
static int lance_open( struct net_device *dev );
static void lance_init_ring( struct net_device *dev );
-static int lance_start_xmit( struct sk_buff *skb, struct net_device *dev );
+static netdev_tx_t lance_start_xmit(struct sk_buff *skb,
+ struct net_device *dev);
static irqreturn_t lance_interrupt( int irq, void *dev_id);
static int lance_rx( struct net_device *dev );
static int lance_close( struct net_device *dev );
@@ -511,7 +512,8 @@ static void lance_init_ring( struct net_device *dev )
}
-static int lance_start_xmit( struct sk_buff *skb, struct net_device *dev )
+static netdev_tx_t
+lance_start_xmit(struct sk_buff *skb, struct net_device *dev)
{
struct lance_private *lp = netdev_priv(dev);
int entry, len;
diff --git a/drivers/net/ethernet/amd/sunlance.c b/drivers/net/ethernet/amd/sunlance.c
index 3153465d4d02f..acbbe4e5a2f8c 100644
--- a/drivers/net/ethernet/amd/sunlance.c
+++ b/drivers/net/ethernet/amd/sunlance.c
@@ -1106,7 +1106,7 @@ static void lance_tx_timeout(struct net_device *dev)
netif_wake_queue(dev);
}
-static int lance_start_xmit(struct sk_buff *skb, struct net_device *dev)
+static netdev_tx_t lance_start_xmit(struct sk_buff *skb, struct net_device *dev)
{
struct lance_private *lp = netdev_priv(dev);
int entry, skblen, len;
diff --git a/drivers/net/ethernet/amd/xgbe/xgbe-drv.c b/drivers/net/ethernet/amd/xgbe/xgbe-drv.c
index 1e4e8b245cd55..1df7f5da8411f 100644
--- a/drivers/net/ethernet/amd/xgbe/xgbe-drv.c
+++ b/drivers/net/ethernet/amd/xgbe/xgbe-drv.c
@@ -1390,7 +1390,7 @@ static int xgbe_close(struct net_device *netdev)
return 0;
}
-static int xgbe_xmit(struct sk_buff *skb, struct net_device *netdev)
+static netdev_tx_t xgbe_xmit(struct sk_buff *skb, struct net_device *netdev)
{
struct xgbe_prv_data *pdata = netdev_priv(netdev);
struct xgbe_hw_if *hw_if = &pdata->hw_if;
@@ -1399,7 +1399,7 @@ static int xgbe_xmit(struct sk_buff *skb, struct net_device *netdev)
struct xgbe_ring *ring;
struct xgbe_packet_data *packet;
struct netdev_queue *txq;
- int ret;
+ netdev_tx_t ret;
DBGPR("-->xgbe_xmit: skb->len = %d\n", skb->len);
--
2.20.1
From: Breno Leitao <[email protected]>
[ Upstream commit 984ecdd68de0fa1f63ce205d6c19ef5a7bc67b40 ]
The tbl pointer is being derefenced by IOMMU_PAGE_SIZE prior the check
if it is not NULL.
Just moving the dereference code to after the check, where there will
be guarantee that 'tbl' will not be NULL.
Signed-off-by: Breno Leitao <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/powerpc/kernel/iommu.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/powerpc/kernel/iommu.c b/arch/powerpc/kernel/iommu.c
index 5f202a566ec5f..9bfdd2510fd5e 100644
--- a/arch/powerpc/kernel/iommu.c
+++ b/arch/powerpc/kernel/iommu.c
@@ -765,9 +765,9 @@ dma_addr_t iommu_map_page(struct device *dev, struct iommu_table *tbl,
vaddr = page_address(page) + offset;
uaddr = (unsigned long)vaddr;
- npages = iommu_num_pages(uaddr, size, IOMMU_PAGE_SIZE(tbl));
if (tbl) {
+ npages = iommu_num_pages(uaddr, size, IOMMU_PAGE_SIZE(tbl));
align = 0;
if (tbl->it_page_shift < PAGE_SHIFT && size >= PAGE_SIZE &&
((unsigned long)vaddr & ~PAGE_MASK) == 0)
--
2.20.1
From: Marcus Folkesson <[email protected]>
[ Upstream commit 0833627fc3f757a0dca11e2a9c46c96335a900ee ]
Do not try to write negative values and make sure that the write goes well.
Signed-off-by: Marcus Folkesson <[email protected]>
Signed-off-by: Jonathan Cameron <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/iio/dac/mcp4922.c | 11 ++++++++---
1 file changed, 8 insertions(+), 3 deletions(-)
diff --git a/drivers/iio/dac/mcp4922.c b/drivers/iio/dac/mcp4922.c
index 3854d201a5d6c..68dd0be1ac076 100644
--- a/drivers/iio/dac/mcp4922.c
+++ b/drivers/iio/dac/mcp4922.c
@@ -94,17 +94,22 @@ static int mcp4922_write_raw(struct iio_dev *indio_dev,
long mask)
{
struct mcp4922_state *state = iio_priv(indio_dev);
+ int ret;
if (val2 != 0)
return -EINVAL;
switch (mask) {
case IIO_CHAN_INFO_RAW:
- if (val > GENMASK(chan->scan_type.realbits-1, 0))
+ if (val < 0 || val > GENMASK(chan->scan_type.realbits - 1, 0))
return -EINVAL;
val <<= chan->scan_type.shift;
- state->value[chan->channel] = val;
- return mcp4922_spi_write(state, chan->channel, val);
+
+ ret = mcp4922_spi_write(state, chan->channel, val);
+ if (!ret)
+ state->value[chan->channel] = val;
+ return ret;
+
default:
return -EINVAL;
}
--
2.20.1
From: Jouni Hogander <[email protected]>
[ Upstream commit 3b5a39979dafea9d0cd69c7ae06088f7a84cdafa ]
Driver/net/can/slcan.c is derived from slip.c. Memory leak was detected
by Syzkaller in slcan. Same issue exists in slip.c and this patch is
addressing the leak in slip.c.
Here is the slcan memory leak trace reported by Syzkaller:
BUG: memory leak unreferenced object 0xffff888067f65500 (size 4096):
comm "syz-executor043", pid 454, jiffies 4294759719 (age 11.930s)
hex dump (first 32 bytes):
73 6c 63 61 6e 30 00 00 00 00 00 00 00 00 00 00 slcan0..........
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<00000000a06eec0d>] __kmalloc+0x18b/0x2c0
[<0000000083306e66>] kvmalloc_node+0x3a/0xc0
[<000000006ac27f87>] alloc_netdev_mqs+0x17a/0x1080
[<0000000061a996c9>] slcan_open+0x3ae/0x9a0
[<000000001226f0f9>] tty_ldisc_open.isra.1+0x76/0xc0
[<0000000019289631>] tty_set_ldisc+0x28c/0x5f0
[<000000004de5a617>] tty_ioctl+0x48d/0x1590
[<00000000daef496f>] do_vfs_ioctl+0x1c7/0x1510
[<0000000059068dbc>] ksys_ioctl+0x99/0xb0
[<000000009a6eb334>] __x64_sys_ioctl+0x78/0xb0
[<0000000053d0332e>] do_syscall_64+0x16f/0x580
[<0000000021b83b99>] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[<000000008ea75434>] 0xfffffffffffffff
Cc: "David S. Miller" <[email protected]>
Cc: Oliver Hartkopp <[email protected]>
Cc: Lukas Bulwahn <[email protected]>
Signed-off-by: Jouni Hogander <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/slip/slip.c | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/net/slip/slip.c
+++ b/drivers/net/slip/slip.c
@@ -860,6 +860,7 @@ err_free_chan:
sl->tty = NULL;
tty->disc_data = NULL;
clear_bit(SLF_INUSE, &sl->flags);
+ free_netdev(sl->dev);
err_exit:
rtnl_unlock();
From: Vijay Immanuel <[email protected]>
[ Upstream commit 030e46e495af855a13964a0aab9753ea82a96edc ]
When a read request is retried for the remaining partial
data, the response may restart from read response first
or read response only. So support those cases.
Do not advance the comp psn beyond the current wqe's last_psn
as that could skip over an entire read wqe and will cause the
req_retry() logic to set an incorrect req psn.
An example sequence is as follows:
Write PSN 40 -- this is the current WQE.
Read request PSN 41
Write PSN 42
Receive ACK PSN 42 -- this will complete the current WQE
for PSN 40, and set the comp psn to 42 which is a problem
because the read request at PSN 41 has been skipped over.
So when req_retry() tries to retransmit the read request,
it sets the req psn to 42 which is incorrect.
When retrying a read request, calculate the number of psns
completed based on the dma resid instead of the wqe first_psn.
The wqe first_psn could have moved if the read request was
retried multiple times.
Set the reth length to the dma resid to handle read retries for
the remaining partial data.
Signed-off-by: Vijay Immanuel <[email protected]>
Signed-off-by: Doug Ledford <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/infiniband/sw/rxe/rxe_comp.c | 21 ++++++++++++++++-----
drivers/infiniband/sw/rxe/rxe_req.c | 15 +++++++++------
2 files changed, 25 insertions(+), 11 deletions(-)
diff --git a/drivers/infiniband/sw/rxe/rxe_comp.c b/drivers/infiniband/sw/rxe/rxe_comp.c
index df15b6d7b645e..b03a6206d9be7 100644
--- a/drivers/infiniband/sw/rxe/rxe_comp.c
+++ b/drivers/infiniband/sw/rxe/rxe_comp.c
@@ -250,6 +250,17 @@ static inline enum comp_state check_ack(struct rxe_qp *qp,
case IB_OPCODE_RC_RDMA_READ_RESPONSE_MIDDLE:
if (pkt->opcode != IB_OPCODE_RC_RDMA_READ_RESPONSE_MIDDLE &&
pkt->opcode != IB_OPCODE_RC_RDMA_READ_RESPONSE_LAST) {
+ /* read retries of partial data may restart from
+ * read response first or response only.
+ */
+ if ((pkt->psn == wqe->first_psn &&
+ pkt->opcode ==
+ IB_OPCODE_RC_RDMA_READ_RESPONSE_FIRST) ||
+ (wqe->first_psn == wqe->last_psn &&
+ pkt->opcode ==
+ IB_OPCODE_RC_RDMA_READ_RESPONSE_ONLY))
+ break;
+
return COMPST_ERROR;
}
break;
@@ -486,11 +497,11 @@ static inline enum comp_state complete_wqe(struct rxe_qp *qp,
struct rxe_pkt_info *pkt,
struct rxe_send_wqe *wqe)
{
- qp->comp.opcode = -1;
-
- if (pkt) {
- if (psn_compare(pkt->psn, qp->comp.psn) >= 0)
- qp->comp.psn = (pkt->psn + 1) & BTH_PSN_MASK;
+ if (pkt && wqe->state == wqe_state_pending) {
+ if (psn_compare(wqe->last_psn, qp->comp.psn) >= 0) {
+ qp->comp.psn = (wqe->last_psn + 1) & BTH_PSN_MASK;
+ qp->comp.opcode = -1;
+ }
if (qp->req.wait_psn) {
qp->req.wait_psn = 0;
diff --git a/drivers/infiniband/sw/rxe/rxe_req.c b/drivers/infiniband/sw/rxe/rxe_req.c
index 0f9fe2ca2a91a..6fb771290c566 100644
--- a/drivers/infiniband/sw/rxe/rxe_req.c
+++ b/drivers/infiniband/sw/rxe/rxe_req.c
@@ -72,9 +72,6 @@ static void req_retry(struct rxe_qp *qp)
int npsn;
int first = 1;
- wqe = queue_head(qp->sq.queue);
- npsn = (qp->comp.psn - wqe->first_psn) & BTH_PSN_MASK;
-
qp->req.wqe_index = consumer_index(qp->sq.queue);
qp->req.psn = qp->comp.psn;
qp->req.opcode = -1;
@@ -106,11 +103,17 @@ static void req_retry(struct rxe_qp *qp)
if (first) {
first = 0;
- if (mask & WR_WRITE_OR_SEND_MASK)
+ if (mask & WR_WRITE_OR_SEND_MASK) {
+ npsn = (qp->comp.psn - wqe->first_psn) &
+ BTH_PSN_MASK;
retry_first_write_send(qp, wqe, mask, npsn);
+ }
- if (mask & WR_READ_MASK)
+ if (mask & WR_READ_MASK) {
+ npsn = (wqe->dma.length - wqe->dma.resid) /
+ qp->mtu;
wqe->iova += npsn * qp->mtu;
+ }
}
wqe->state = wqe_state_posted;
@@ -439,7 +442,7 @@ static struct sk_buff *init_req_packet(struct rxe_qp *qp,
if (pkt->mask & RXE_RETH_MASK) {
reth_set_rkey(pkt, ibwr->wr.rdma.rkey);
reth_set_va(pkt, wqe->iova);
- reth_set_len(pkt, wqe->dma.length);
+ reth_set_len(pkt, wqe->dma.resid);
}
if (pkt->mask & RXE_IMMDT_MASK)
--
2.20.1
From: Borislav Petkov <[email protected]>
[ Upstream commit fa112cf1e8bc693d5a666b1c479a2859c8b6e0f1 ]
When building a 32-bit config which has the above MFD item as module
but OLPC_XO1_PM is enabled =y - which is bool, btw - the kernel fails
building with:
ld: arch/x86/platform/olpc/olpc-xo1-pm.o: in function `xo1_pm_remove':
/home/boris/kernel/linux/arch/x86/platform/olpc/olpc-xo1-pm.c:159: undefined reference to `mfd_cell_disable'
ld: arch/x86/platform/olpc/olpc-xo1-pm.o: in function `xo1_pm_probe':
/home/boris/kernel/linux/arch/x86/platform/olpc/olpc-xo1-pm.c:133: undefined reference to `mfd_cell_enable'
make: *** [Makefile:1030: vmlinux] Error 1
Force MFD_CS5535 to y if OLPC_XO1_PM is enabled.
Signed-off-by: Borislav Petkov <[email protected]>
Cc: Lubomir Rintel <[email protected]>
Cc: [email protected]
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
arch/x86/Kconfig | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 1067f7668c4ee..80636caee07cc 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -2614,8 +2614,7 @@ config OLPC
config OLPC_XO1_PM
bool "OLPC XO-1 Power Management"
- depends on OLPC && MFD_CS5535 && PM_SLEEP
- select MFD_CORE
+ depends on OLPC && MFD_CS5535=y && PM_SLEEP
---help---
Add support for poweroff and suspend of the OLPC XO-1 laptop.
--
2.20.1
On 22/11/2019 10:25, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.9.203 release.
> There are 222 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Sun, 24 Nov 2019 09:59:19 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.9.203-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.9.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
All tests are passing for Tegra ...
Test results for stable-v4.9:
8 builds: 8 pass, 0 fail
16 boots: 16 pass, 0 fail
24 tests: 24 pass, 0 fail
Linux version: 4.9.203-rc1-gc2ff777d9ae8
Boards tested: tegra124-jetson-tk1, tegra20-ventana,
tegra210-p2371-2180, tegra30-cardhu-a04
Cheers
Jon
--
nvpublic
On Fri, Nov 22, 2019 at 11:25:40AM +0100, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.9.203 release.
> There are 222 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Sun, 24 Nov 2019 09:59:19 +0000.
> Anything received after that time might be too late.
>
Build results:
total: 172 pass: 172 fail: 0
Qemu test results:
total: 356 pass: 356 fail: 0
Guenter
On 11/22/19 3:25 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.9.203 release.
> There are 222 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Sun, 24 Nov 2019 09:59:19 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.9.203-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.9.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
>
Compiled and booted on my test system. No dmesg regressions.
thanks,
-- Shuah
Hello!
On 11/22/19 4:25 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.9.203 release.
> There are 222 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Sun, 24 Nov 2019 09:59:19 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.9.203-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.9.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
Results from Linaro’s test farm.
No regressions on arm64, arm, x86_64, and i386.
Summary
------------------------------------------------------------------------
kernel: 4.9.203-rc1
git repo: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
git branch: linux-4.9.y
git commit: c2ff777d9ae88f46236e8fdb9654a87b0468b28b
git describe: v4.9.202-223-gc2ff777d9ae8
Test details: https://qa-reports.linaro.org/lkft/linux-stable-rc-4.9-oe/build/v4.9.202-223-gc2ff777d9ae8
No regressions (compared to build v4.9.202)
No fixes (compared to build v4.9.202)
Ran 23946 total tests in the following environments and test suites.
Environments
--------------
- dragonboard-410c - arm64
- hi6220-hikey - arm64
- i386
- juno-r2 - arm64
- qemu_arm
- qemu_arm64
- qemu_i386
- qemu_x86_64
- x15 - arm
- x86_64
Test Suites
-----------
* build
* install-android-platform-tools-r2600
* kselftest
* libhugetlbfs
* linux-log-parser
* ltp-cap_bounds-tests
* ltp-commands-tests
* ltp-containers-tests
* ltp-cpuhotplug-tests
* ltp-cve-tests
* ltp-dio-tests
* ltp-fcntl-locktests-tests
* ltp-filecaps-tests
* ltp-fs-tests
* ltp-fs_bind-tests
* ltp-fs_perms_simple-tests
* ltp-fsx-tests
* ltp-hugetlb-tests
* ltp-io-tests
* ltp-ipc-tests
* ltp-math-tests
* ltp-mm-tests
* ltp-nptl-tests
* ltp-pty-tests
* ltp-sched-tests
* ltp-securebits-tests
* ltp-syscalls-tests
* perf
* spectre-meltdown-checker-test
* v4l2-compliance
* network-basic-tests
* ltp-open-posix-tests
* prep-tmp-disk
* kvm-unit-tests
* kselftest-vsyscall-mode-native
* kselftest-vsyscall-mode-none
* ssuite
Greetings!
Daniel Díaz
[email protected]
--
Linaro LKFT
https://lkft.linaro.org