Add SFP (Security Fuse Processor) read support for NXP (Freescale)
QorIQ series SOC's.
This patch adds support for the T1023 SOC using the SFP offset from
the existing T1023 device tree. In theory this should also work for
T1024, T1014 and T1013 which uses the same SFP base offset.
Signed-off-by: Richard Alpe <[email protected]>
---
v2: Rebase.
v3: Updates according to feedback from Srinivas.
v4,v5: No changes to this patch.
drivers/nvmem/Kconfig | 12 ++++++
drivers/nvmem/Makefile | 2 +
drivers/nvmem/qoriq-efuse.c | 78 +++++++++++++++++++++++++++++++++++++
3 files changed, 92 insertions(+)
create mode 100644 drivers/nvmem/qoriq-efuse.c
diff --git a/drivers/nvmem/Kconfig b/drivers/nvmem/Kconfig
index 6dec38805041..43446e5f7d9b 100644
--- a/drivers/nvmem/Kconfig
+++ b/drivers/nvmem/Kconfig
@@ -377,4 +377,16 @@ config NVMEM_ZYNQMP
If sure, say yes. If unsure, say no.
+config NVMEM_QORIQ_EFUSE
+ tristate "NXP QorIQ eFuse support"
+ depends on PPC_85xx || COMPILE_TEST
+ depends on HAS_IOMEM
+ help
+ This driver provides read support for the eFuses (SFP) on NXP QorIQ
+ series SoC's. This includes secure boot settings, the globally unique
+ NXP ID 'FUIDR' and the OEM unique ID 'OUIDR'.
+
+ This driver can also be built as a module. If so, the module
+ will be called nvmem_qoriq_efuse.
+
endif
diff --git a/drivers/nvmem/Makefile b/drivers/nvmem/Makefile
index 6a1efffa88f0..b8fdf9b51953 100644
--- a/drivers/nvmem/Makefile
+++ b/drivers/nvmem/Makefile
@@ -74,3 +74,5 @@ obj-$(CONFIG_NVMEM_VF610_OCOTP) += nvmem-vf610-ocotp.o
nvmem-vf610-ocotp-y := vf610-ocotp.o
obj-$(CONFIG_NVMEM_ZYNQMP) += nvmem_zynqmp_nvmem.o
nvmem_zynqmp_nvmem-y := zynqmp_nvmem.o
+obj-$(CONFIG_NVMEM_QORIQ_EFUSE) += nvmem-qoriq-efuse.o
+nvmem-qoriq-efuse-y := qoriq-efuse.o
diff --git a/drivers/nvmem/qoriq-efuse.c b/drivers/nvmem/qoriq-efuse.c
new file mode 100644
index 000000000000..e7fd04d6dd94
--- /dev/null
+++ b/drivers/nvmem/qoriq-efuse.c
@@ -0,0 +1,78 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2023 Westermo Network Technologies AB
+ */
+
+#include <linux/device.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/mod_devicetable.h>
+#include <linux/nvmem-provider.h>
+#include <linux/platform_device.h>
+
+struct qoriq_efuse_priv {
+ void __iomem *base;
+};
+
+static int qoriq_efuse_read(void *context, unsigned int offset, void *val,
+ size_t bytes)
+{
+ struct qoriq_efuse_priv *priv = context;
+
+ /* .stride = 4 so offset is guaranteed to be aligned */
+ __ioread32_copy(val, priv->base + offset, bytes / 4);
+
+ /* Ignore trailing bytes (there shouldn't be any) */
+
+ return 0;
+}
+
+static int qoriq_efuse_probe(struct platform_device *pdev)
+{
+ struct nvmem_config config = {
+ .dev = &pdev->dev,
+ .read_only = true,
+ .reg_read = qoriq_efuse_read,
+ .stride = sizeof(u32),
+ .word_size = sizeof(u32),
+ .name = "qoriq_efuse_read",
+ .id = NVMEM_DEVID_AUTO,
+ .root_only = true,
+ };
+ struct qoriq_efuse_priv *priv;
+ struct nvmem_device *nvmem;
+ struct resource *res;
+
+ priv = devm_kzalloc(config.dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ priv->base = devm_platform_get_and_ioremap_resource(pdev, 0, &res);
+ if (IS_ERR(priv->base))
+ return PTR_ERR(priv->base);
+
+ config.size = resource_size(res);
+ config.priv = priv;
+ nvmem = devm_nvmem_register(config.dev, &config);
+
+ return PTR_ERR_OR_ZERO(nvmem);
+}
+
+static const struct of_device_id qoriq_efuse_of_match[] = {
+ { .compatible = "fsl,t1023-sfp", },
+ {/* sentinel */},
+};
+MODULE_DEVICE_TABLE(of, qoriq_efuse_of_match);
+
+static struct platform_driver qoriq_efuse_driver = {
+ .probe = qoriq_efuse_probe,
+ .driver = {
+ .name = "qoriq-efuse",
+ .of_match_table = qoriq_efuse_of_match,
+ },
+};
+module_platform_driver(qoriq_efuse_driver);
+
+MODULE_AUTHOR("Richard Alpe <[email protected]>");
+MODULE_DESCRIPTION("NXP QorIQ Security Fuse Processor (SFP) Reader");
+MODULE_LICENSE("GPL");
--
2.34.1
Hi Richard,
Thanks for your work.
On 2023-04-10 10:20:51 +0200, Richard Alpe wrote:
> Add SFP (Security Fuse Processor) read support for NXP (Freescale)
> QorIQ series SOC's.
>
> This patch adds support for the T1023 SOC using the SFP offset from
> the existing T1023 device tree. In theory this should also work for
> T1024, T1014 and T1013 which uses the same SFP base offset.
>
> Signed-off-by: Richard Alpe <[email protected]>
Looks good.
Reviewed-by: Niklas Söderlund <[email protected]>
> ---
> v2: Rebase.
> v3: Updates according to feedback from Srinivas.
> v4,v5: No changes to this patch.
>
> drivers/nvmem/Kconfig | 12 ++++++
> drivers/nvmem/Makefile | 2 +
> drivers/nvmem/qoriq-efuse.c | 78 +++++++++++++++++++++++++++++++++++++
> 3 files changed, 92 insertions(+)
> create mode 100644 drivers/nvmem/qoriq-efuse.c
>
> diff --git a/drivers/nvmem/Kconfig b/drivers/nvmem/Kconfig
> index 6dec38805041..43446e5f7d9b 100644
> --- a/drivers/nvmem/Kconfig
> +++ b/drivers/nvmem/Kconfig
> @@ -377,4 +377,16 @@ config NVMEM_ZYNQMP
>
> If sure, say yes. If unsure, say no.
>
> +config NVMEM_QORIQ_EFUSE
> + tristate "NXP QorIQ eFuse support"
> + depends on PPC_85xx || COMPILE_TEST
> + depends on HAS_IOMEM
> + help
> + This driver provides read support for the eFuses (SFP) on NXP QorIQ
> + series SoC's. This includes secure boot settings, the globally unique
> + NXP ID 'FUIDR' and the OEM unique ID 'OUIDR'.
> +
> + This driver can also be built as a module. If so, the module
> + will be called nvmem_qoriq_efuse.
> +
> endif
> diff --git a/drivers/nvmem/Makefile b/drivers/nvmem/Makefile
> index 6a1efffa88f0..b8fdf9b51953 100644
> --- a/drivers/nvmem/Makefile
> +++ b/drivers/nvmem/Makefile
> @@ -74,3 +74,5 @@ obj-$(CONFIG_NVMEM_VF610_OCOTP) += nvmem-vf610-ocotp.o
> nvmem-vf610-ocotp-y := vf610-ocotp.o
> obj-$(CONFIG_NVMEM_ZYNQMP) += nvmem_zynqmp_nvmem.o
> nvmem_zynqmp_nvmem-y := zynqmp_nvmem.o
> +obj-$(CONFIG_NVMEM_QORIQ_EFUSE) += nvmem-qoriq-efuse.o
> +nvmem-qoriq-efuse-y := qoriq-efuse.o
> diff --git a/drivers/nvmem/qoriq-efuse.c b/drivers/nvmem/qoriq-efuse.c
> new file mode 100644
> index 000000000000..e7fd04d6dd94
> --- /dev/null
> +++ b/drivers/nvmem/qoriq-efuse.c
> @@ -0,0 +1,78 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (C) 2023 Westermo Network Technologies AB
> + */
> +
> +#include <linux/device.h>
> +#include <linux/io.h>
> +#include <linux/module.h>
> +#include <linux/mod_devicetable.h>
> +#include <linux/nvmem-provider.h>
> +#include <linux/platform_device.h>
> +
> +struct qoriq_efuse_priv {
> + void __iomem *base;
> +};
> +
> +static int qoriq_efuse_read(void *context, unsigned int offset, void *val,
> + size_t bytes)
> +{
> + struct qoriq_efuse_priv *priv = context;
> +
> + /* .stride = 4 so offset is guaranteed to be aligned */
> + __ioread32_copy(val, priv->base + offset, bytes / 4);
> +
> + /* Ignore trailing bytes (there shouldn't be any) */
> +
> + return 0;
> +}
> +
> +static int qoriq_efuse_probe(struct platform_device *pdev)
> +{
> + struct nvmem_config config = {
> + .dev = &pdev->dev,
> + .read_only = true,
> + .reg_read = qoriq_efuse_read,
> + .stride = sizeof(u32),
> + .word_size = sizeof(u32),
> + .name = "qoriq_efuse_read",
> + .id = NVMEM_DEVID_AUTO,
> + .root_only = true,
> + };
> + struct qoriq_efuse_priv *priv;
> + struct nvmem_device *nvmem;
> + struct resource *res;
> +
> + priv = devm_kzalloc(config.dev, sizeof(*priv), GFP_KERNEL);
> + if (!priv)
> + return -ENOMEM;
> +
> + priv->base = devm_platform_get_and_ioremap_resource(pdev, 0, &res);
> + if (IS_ERR(priv->base))
> + return PTR_ERR(priv->base);
> +
> + config.size = resource_size(res);
> + config.priv = priv;
> + nvmem = devm_nvmem_register(config.dev, &config);
> +
> + return PTR_ERR_OR_ZERO(nvmem);
> +}
> +
> +static const struct of_device_id qoriq_efuse_of_match[] = {
> + { .compatible = "fsl,t1023-sfp", },
> + {/* sentinel */},
> +};
> +MODULE_DEVICE_TABLE(of, qoriq_efuse_of_match);
> +
> +static struct platform_driver qoriq_efuse_driver = {
> + .probe = qoriq_efuse_probe,
> + .driver = {
> + .name = "qoriq-efuse",
> + .of_match_table = qoriq_efuse_of_match,
> + },
> +};
> +module_platform_driver(qoriq_efuse_driver);
> +
> +MODULE_AUTHOR("Richard Alpe <[email protected]>");
> +MODULE_DESCRIPTION("NXP QorIQ Security Fuse Processor (SFP) Reader");
> +MODULE_LICENSE("GPL");
> --
> 2.34.1
>
--
Kind Regards,
Niklas Söderlund
On 2023-04-10 10:20, Richard Alpe wrote:
> Add SFP (Security Fuse Processor) read support for NXP (Freescale)
> QorIQ series SOC's.
>
> This patch adds support for the T1023 SOC using the SFP offset from
> the existing T1023 device tree. In theory this should also work for
> T1024, T1014 and T1013 which uses the same SFP base offset.
>
> Signed-off-by: Richard Alpe <[email protected]>
> ---
> v2: Rebase.
> v3: Updates according to feedback from Srinivas.
> v4,v5: No changes to this patch.
>
> drivers/nvmem/Kconfig | 12 ++++++
> drivers/nvmem/Makefile | 2 +
> drivers/nvmem/qoriq-efuse.c | 78 +++++++++++++++++++++++++++++++++++++
> 3 files changed, 92 insertions(+)
> create mode 100644 drivers/nvmem/qoriq-efuse.c
>
> diff --git a/drivers/nvmem/Kconfig b/drivers/nvmem/Kconfig
> index 6dec38805041..43446e5f7d9b 100644
> --- a/drivers/nvmem/Kconfig
> +++ b/drivers/nvmem/Kconfig
> @@ -377,4 +377,16 @@ config NVMEM_ZYNQMP
>
> If sure, say yes. If unsure, say no.
>
> +config NVMEM_QORIQ_EFUSE
> + tristate "NXP QorIQ eFuse support"
> + depends on PPC_85xx || COMPILE_TEST
> + depends on HAS_IOMEM
> + help
> + This driver provides read support for the eFuses (SFP) on NXP QorIQ
> + series SoC's. This includes secure boot settings, the globally
> unique
> + NXP ID 'FUIDR' and the OEM unique ID 'OUIDR'.
> +
> + This driver can also be built as a module. If so, the module
> + will be called nvmem_qoriq_efuse.
> +
> endif
> diff --git a/drivers/nvmem/Makefile b/drivers/nvmem/Makefile
> index 6a1efffa88f0..b8fdf9b51953 100644
> --- a/drivers/nvmem/Makefile
> +++ b/drivers/nvmem/Makefile
> @@ -74,3 +74,5 @@ obj-$(CONFIG_NVMEM_VF610_OCOTP) +=
> nvmem-vf610-ocotp.o
> nvmem-vf610-ocotp-y := vf610-ocotp.o
> obj-$(CONFIG_NVMEM_ZYNQMP) += nvmem_zynqmp_nvmem.o
> nvmem_zynqmp_nvmem-y := zynqmp_nvmem.o
> +obj-$(CONFIG_NVMEM_QORIQ_EFUSE) += nvmem-qoriq-efuse.o
> +nvmem-qoriq-efuse-y := qoriq-efuse.o
> diff --git a/drivers/nvmem/qoriq-efuse.c b/drivers/nvmem/qoriq-efuse.c
> new file mode 100644
> index 000000000000..e7fd04d6dd94
> --- /dev/null
> +++ b/drivers/nvmem/qoriq-efuse.c
> @@ -0,0 +1,78 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (C) 2023 Westermo Network Technologies AB
> + */
> +
> +#include <linux/device.h>
> +#include <linux/io.h>
> +#include <linux/module.h>
> +#include <linux/mod_devicetable.h>
> +#include <linux/nvmem-provider.h>
> +#include <linux/platform_device.h>
> +
> +struct qoriq_efuse_priv {
> + void __iomem *base;
> +};
> +
> +static int qoriq_efuse_read(void *context, unsigned int offset, void
> *val,
> + size_t bytes)
> +{
> + struct qoriq_efuse_priv *priv = context;
> +
> + /* .stride = 4 so offset is guaranteed to be aligned */
> + __ioread32_copy(val, priv->base + offset, bytes / 4);
> +
> + /* Ignore trailing bytes (there shouldn't be any) */
> +
> + return 0;
> +}
> +
> +static int qoriq_efuse_probe(struct platform_device *pdev)
> +{
> + struct nvmem_config config = {
> + .dev = &pdev->dev,
> + .read_only = true,
> + .reg_read = qoriq_efuse_read,
> + .stride = sizeof(u32),
> + .word_size = sizeof(u32),
> + .name = "qoriq_efuse_read",
> + .id = NVMEM_DEVID_AUTO,
> + .root_only = true,
> + };
> + struct qoriq_efuse_priv *priv;
> + struct nvmem_device *nvmem;
> + struct resource *res;
> +
> + priv = devm_kzalloc(config.dev, sizeof(*priv), GFP_KERNEL);
> + if (!priv)
> + return -ENOMEM;
> +
> + priv->base = devm_platform_get_and_ioremap_resource(pdev, 0, &res);
> + if (IS_ERR(priv->base))
> + return PTR_ERR(priv->base);
> +
> + config.size = resource_size(res);
> + config.priv = priv;
> + nvmem = devm_nvmem_register(config.dev, &config);
> +
> + return PTR_ERR_OR_ZERO(nvmem);
> +}
> +
> +static const struct of_device_id qoriq_efuse_of_match[] = {
> + { .compatible = "fsl,t1023-sfp", },
> + {/* sentinel */},
> +};
> +MODULE_DEVICE_TABLE(of, qoriq_efuse_of_match);
> +
> +static struct platform_driver qoriq_efuse_driver = {
> + .probe = qoriq_efuse_probe,
> + .driver = {
> + .name = "qoriq-efuse",
> + .of_match_table = qoriq_efuse_of_match,
> + },
> +};
> +module_platform_driver(qoriq_efuse_driver);
> +
> +MODULE_AUTHOR("Richard Alpe <[email protected]>");
> +MODULE_DESCRIPTION("NXP QorIQ Security Fuse Processor (SFP) Reader");
> +MODULE_LICENSE("GPL");
Gentle ping on this Srinivas
On 4/10/23 04:20, Richard Alpe wrote:
> Add SFP (Security Fuse Processor) read support for NXP (Freescale)
> QorIQ series SOC's.
>
> This patch adds support for the T1023 SOC using the SFP offset from
> the existing T1023 device tree. In theory this should also work for
> T1024, T1014 and T1013 which uses the same SFP base offset.
>
> Signed-off-by: Richard Alpe <[email protected]>
This seems like a duplicate of layerscape-sfp.c. The hardware is
(presumably) quite similar, with the T1024RM referencing the QorIQ Trust
Architecture User Guide version 2.0, and the L1046 (e.g.) referencing
version 2.1.
I think this driver should be removed in favor of the older driver.
There are some problematic bits: most notably no offset is applied by
this driver, so all fuses have an offset of 0x200. So we will need to
implement/document this only for the "fsl,t1023-sfp" compatible, which
has already made its way into the T1023 devicetree...
This really should have been caught during review; a quick grep for
"SFP" would have revealed the duplication.
--Sean
[Embedded World 2024, SECO SpA]<https://www.messe-ticket.de/Nuernberg/embeddedworld2024/Register/ew24517689>
On 3/12/24 18:09, Sean Anderson wrote:
> On 4/10/23 04:20, Richard Alpe wrote:
>> Add SFP (Security Fuse Processor) read support for NXP (Freescale)
>> QorIQ series SOC's.
>>
>> This patch adds support for the T1023 SOC using the SFP offset from
>> the existing T1023 device tree. In theory this should also work for
>> T1024, T1014 and T1013 which uses the same SFP base offset.
>>
>> Signed-off-by: Richard Alpe <[email protected]>
>
> This seems like a duplicate of layerscape-sfp.c. The hardware is
> (presumably) quite similar, with the T1024RM referencing the QorIQ Trust
> Architecture User Guide version 2.0, and the L1046 (e.g.) referencing
> version 2.1.
>
> I think this driver should be removed in favor of the older driver.
> There are some problematic bits: most notably no offset is applied by
> this driver, so all fuses have an offset of 0x200. So we will need to
> implement/document this only for the "fsl,t1023-sfp" compatible, which
> has already made its way into the T1023 devicetree...
Actually, it seems like the driver was added long after the compatible
was added to t1023si-post.dtsi, so maybe we can just change the semantics
of the nvmem cell offset.
--Sean
> This really should have been caught during review; a quick grep for
> "SFP" would have revealed the duplication.
>
> --Sean
[Embedded World 2024, SECO SpA]<https://www.messe-ticket.de/Nuernberg/embeddedworld2024/Register/ew24517689>