2019-01-24 07:53:35

by Jan Kiszka

[permalink] [raw]
Subject: [PATCH v2] arm64: dts: hikey: Give wifi some time after power-on

From: Jan Kiszka <[email protected]>

Somewhere along recent changes to power control of the wl1835, power-on
became very unreliable on the hikey, failing like this:

wl1271_sdio: probe of mmc2:0001:1 failed with error -16
wl1271_sdio: probe of mmc2:0001:2 failed with error -16

After playing with some dt parameters and comparing to other users of
this chip, it turned out we need some power-on delay to make things
stable again. In contrast to those other users which define 200 ms, the
hikey would already be happy with 1 ms. Still, we use the safer 10 ms,
like on the Ultra96.

Fixes: ea452678734e ("arm64: dts: hikey: Fix WiFi support")
Signed-off-by: Jan Kiszka <[email protected]>
Acked-by: Ulf Hansson <[email protected]>
---

Changes in v2:
- set delay to 10 ms
- updated changelog

Who will take care of updating also the Hikey firmware dts with this
change?

arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts | 1 +
1 file changed, 1 insertion(+)

diff --git a/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts b/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts
index 610235028cc7..ba946543dd0a 100644
--- a/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts
+++ b/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts
@@ -118,6 +118,7 @@
reset-gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
clocks = <&pmic>;
clock-names = "ext_clock";
+ post-power-on-delay-ms = <10>;
power-off-delay-us = <10>;
};

--
2.16.4


2019-02-01 16:34:51

by Wei Xu

[permalink] [raw]
Subject: Re: [PATCH v2] arm64: dts: hikey: Give wifi some time after power-on

Hi Jan,

On 1/24/2019 7:52 AM, Jan Kiszka wrote:
> From: Jan Kiszka <[email protected]>
>
> Somewhere along recent changes to power control of the wl1835, power-on
> became very unreliable on the hikey, failing like this:
>
> wl1271_sdio: probe of mmc2:0001:1 failed with error -16
> wl1271_sdio: probe of mmc2:0001:2 failed with error -16
>
> After playing with some dt parameters and comparing to other users of
> this chip, it turned out we need some power-on delay to make things
> stable again. In contrast to those other users which define 200 ms, the
> hikey would already be happy with 1 ms. Still, we use the safer 10 ms,
> like on the Ultra96.
>
> Fixes: ea452678734e ("arm64: dts: hikey: Fix WiFi support")
> Signed-off-by: Jan Kiszka <[email protected]>
> Acked-by: Ulf Hansson <[email protected]>

Applied to the hisilicon soc dt tree.
Thanks!

Best Regards,
Wei

> ---
>
> Changes in v2:
> - set delay to 10 ms
> - updated changelog
>
> Who will take care of updating also the Hikey firmware dts with this
> change?
>
> arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts | 1 +
> 1 file changed, 1 insertion(+)
>
> diff --git a/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts b/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts
> index 610235028cc7..ba946543dd0a 100644
> --- a/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts
> +++ b/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts
> @@ -118,6 +118,7 @@
> reset-gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
> clocks = <&pmic>;
> clock-names = "ext_clock";
> + post-power-on-delay-ms = <10>;
> power-off-delay-us = <10>;
> };
>
> --
> 2.16.4
>
> .
>


2019-02-04 06:07:43

by Ulf Hansson

[permalink] [raw]
Subject: Re: [PATCH v2] arm64: dts: hikey: Give wifi some time after power-on

On Fri, 1 Feb 2019 at 17:34, Wei Xu <[email protected]> wrote:
>
> Hi Jan,
>
> On 1/24/2019 7:52 AM, Jan Kiszka wrote:
> > From: Jan Kiszka <[email protected]>
> >
> > Somewhere along recent changes to power control of the wl1835, power-on
> > became very unreliable on the hikey, failing like this:
> >
> > wl1271_sdio: probe of mmc2:0001:1 failed with error -16
> > wl1271_sdio: probe of mmc2:0001:2 failed with error -16
> >
> > After playing with some dt parameters and comparing to other users of
> > this chip, it turned out we need some power-on delay to make things
> > stable again. In contrast to those other users which define 200 ms, the
> > hikey would already be happy with 1 ms. Still, we use the safer 10 ms,
> > like on the Ultra96.
> >
> > Fixes: ea452678734e ("arm64: dts: hikey: Fix WiFi support")
> > Signed-off-by: Jan Kiszka <[email protected]>
> > Acked-by: Ulf Hansson <[email protected]>
>
> Applied to the hisilicon soc dt tree.

Wei, can you please also add a stable tag to it?

[...]

Thanks and kind regards
Uffe

2019-02-04 11:14:30

by Wei Xu

[permalink] [raw]
Subject: Re: [PATCH v2] arm64: dts: hikey: Give wifi some time after power-on

Hi Ulf,

On 2/4/2019 6:06 AM, Ulf Hansson wrote:
> On Fri, 1 Feb 2019 at 17:34, Wei Xu <[email protected]> wrote:
>>
>> Hi Jan,
>>
>> On 1/24/2019 7:52 AM, Jan Kiszka wrote:
>>> From: Jan Kiszka <[email protected]>
>>>
>>> Somewhere along recent changes to power control of the wl1835, power-on
>>> became very unreliable on the hikey, failing like this:
>>>
>>> wl1271_sdio: probe of mmc2:0001:1 failed with error -16
>>> wl1271_sdio: probe of mmc2:0001:2 failed with error -16
>>>
>>> After playing with some dt parameters and comparing to other users of
>>> this chip, it turned out we need some power-on delay to make things
>>> stable again. In contrast to those other users which define 200 ms, the
>>> hikey would already be happy with 1 ms. Still, we use the safer 10 ms,
>>> like on the Ultra96.
>>>
>>> Fixes: ea452678734e ("arm64: dts: hikey: Fix WiFi support")
>>> Signed-off-by: Jan Kiszka <[email protected]>
>>> Acked-by: Ulf Hansson <[email protected]>
>>
>> Applied to the hisilicon soc dt tree.
>
> Wei, can you please also add a stable tag to it?

Yes, added below tag into this patch.
Cc: <[email protected]> #4.12+

Thanks for your kindly reminder :)

Best Regards,
Wei

>
> [...]
>
> Thanks and kind regards
> Uffe
>
> .
>