This patch series based on v4.20-rc1, include MT2712 usb/iommu/smi/i2c/spi/pwm/mmc/nand/pcie device nodes
Chunfeng Yun (1):
arm64: dts: Add USB3 related nodes for MT2712
Honghui Zhang (1):
arm64: dts: add pcie nodes for MT2712
YT Shen (6):
arm64: dts: add iommu/smi nodes for MT2712
arm64: dts: add i2c nodes for MT2712
arm64: dts: add spi nodes for MT2712
arm64: dts: add pwm nodes for MT2712
arm64: dts: add mmc nodes for MT2712
arm64: dts: add nand nodes for MT2712
arch/arm64/boot/dts/mediatek/mt2712-evb.dts | 98 +++++
arch/arm64/boot/dts/mediatek/mt2712e.dtsi | 555 ++++++++++++++++++++++++++++
2 files changed, 653 insertions(+)
--
1.9.1
Signed-off-by: YT Shen <[email protected]>
---
arch/arm64/boot/dts/mediatek/mt2712e.dtsi | 128 ++++++++++++++++++++++++++++++
1 file changed, 128 insertions(+)
diff --git a/arch/arm64/boot/dts/mediatek/mt2712e.dtsi b/arch/arm64/boot/dts/mediatek/mt2712e.dtsi
index 6c228a2..d429770 100644
--- a/arch/arm64/boot/dts/mediatek/mt2712e.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt2712e.dtsi
@@ -8,6 +8,7 @@
#include <dt-bindings/clock/mt2712-clk.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/memory/mt2712-larb-port.h>
#include <dt-bindings/phy/phy.h>
#include <dt-bindings/power/mt2712-power.h>
#include "mt2712-pinfunc.h"
@@ -313,12 +314,33 @@
status = "disabled";
};
+ iommu0: iommu@10205000 {
+ compatible = "mediatek,mt2712-m4u";
+ reg = <0 0x10205000 0 0x1000>;
+ interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&infracfg CLK_INFRA_M4U>;
+ clock-names = "bclk";
+ mediatek,larbs = <&larb0 &larb1 &larb2
+ &larb3 &larb6>;
+ #iommu-cells = <1>;
+ };
+
apmixedsys: syscon@10209000 {
compatible = "mediatek,mt2712-apmixedsys", "syscon";
reg = <0 0x10209000 0 0x1000>;
#clock-cells = <1>;
};
+ iommu1: iommu@1020a000 {
+ compatible = "mediatek,mt2712-m4u";
+ reg = <0 0x1020a000 0 0x1000>;
+ interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&infracfg CLK_INFRA_M4U>;
+ clock-names = "bclk";
+ mediatek,larbs = <&larb4 &larb5 &larb7>;
+ #iommu-cells = <1>;
+ };
+
mcucfg: syscon@10220000 {
compatible = "mediatek,mt2712-mcucfg", "syscon";
reg = <0 0x10220000 0 0x1000>;
@@ -543,12 +565,85 @@
#clock-cells = <1>;
};
+ larb0: larb@14021000 {
+ compatible = "mediatek,mt2712-smi-larb";
+ reg = <0 0x14021000 0 0x1000>;
+ mediatek,smi = <&smi_common0>;
+ mediatek,larb-id = <0>;
+ power-domains = <&scpsys MT2712_POWER_DOMAIN_MM>;
+ clocks = <&mmsys CLK_MM_SMI_LARB0>,
+ <&mmsys CLK_MM_SMI_LARB0>;
+ clock-names = "apb", "smi";
+ };
+
+ smi_common0: smi@14022000 {
+ compatible = "mediatek,mt2712-smi-common";
+ reg = <0 0x14022000 0 0x1000>;
+ power-domains = <&scpsys MT2712_POWER_DOMAIN_MM>;
+ clocks = <&mmsys CLK_MM_SMI_COMMON>,
+ <&mmsys CLK_MM_SMI_COMMON>;
+ clock-names = "apb", "smi";
+ };
+
+ larb4: larb@14027000 {
+ compatible = "mediatek,mt2712-smi-larb";
+ reg = <0 0x14027000 0 0x1000>;
+ mediatek,smi = <&smi_common1>;
+ mediatek,larb-id = <4>;
+ power-domains = <&scpsys MT2712_POWER_DOMAIN_MM>;
+ clocks = <&mmsys CLK_MM_SMI_LARB4>,
+ <&mmsys CLK_MM_SMI_LARB4>;
+ clock-names = "apb", "smi";
+ };
+
+ larb5: larb@14030000 {
+ compatible = "mediatek,mt2712-smi-larb";
+ reg = <0 0x14030000 0 0x1000>;
+ mediatek,smi = <&smi_common1>;
+ mediatek,larb-id = <5>;
+ power-domains = <&scpsys MT2712_POWER_DOMAIN_MM>;
+ clocks = <&mmsys CLK_MM_SMI_LARB5>,
+ <&mmsys CLK_MM_SMI_LARB5>;
+ clock-names = "apb", "smi";
+ };
+
+ smi_common1: smi@14031000 {
+ compatible = "mediatek,mt2712-smi-common";
+ reg = <0 0x14031000 0 0x1000>;
+ power-domains = <&scpsys MT2712_POWER_DOMAIN_MM>;
+ clocks = <&mmsys CLK_MM_SMI_COMMON1>,
+ <&mmsys CLK_MM_SMI_COMMON1>;
+ clock-names = "apb", "smi";
+ };
+
+ larb7: larb@14032000 {
+ compatible = "mediatek,mt2712-smi-larb";
+ reg = <0 0x14032000 0 0x1000>;
+ mediatek,smi = <&smi_common1>;
+ mediatek,larb-id = <7>;
+ power-domains = <&scpsys MT2712_POWER_DOMAIN_MM>;
+ clocks = <&mmsys CLK_MM_SMI_LARB7>,
+ <&mmsys CLK_MM_SMI_LARB7>;
+ clock-names = "apb", "smi";
+ };
+
imgsys: syscon@15000000 {
compatible = "mediatek,mt2712-imgsys", "syscon";
reg = <0 0x15000000 0 0x1000>;
#clock-cells = <1>;
};
+ larb2: larb@15001000 {
+ compatible = "mediatek,mt2712-smi-larb";
+ reg = <0 0x15001000 0 0x1000>;
+ mediatek,smi = <&smi_common0>;
+ mediatek,larb-id = <2>;
+ power-domains = <&scpsys MT2712_POWER_DOMAIN_ISP>;
+ clocks = <&imgsys CLK_IMG_SMI_LARB2>,
+ <&imgsys CLK_IMG_SMI_LARB2>;
+ clock-names = "apb", "smi";
+ };
+
bdpsys: syscon@15010000 {
compatible = "mediatek,mt2712-bdpsys", "syscon";
reg = <0 0x15010000 0 0x1000>;
@@ -561,12 +656,45 @@
#clock-cells = <1>;
};
+ larb1: larb@16010000 {
+ compatible = "mediatek,mt2712-smi-larb";
+ reg = <0 0x16010000 0 0x1000>;
+ mediatek,smi = <&smi_common0>;
+ mediatek,larb-id = <1>;
+ power-domains = <&scpsys MT2712_POWER_DOMAIN_VDEC>;
+ clocks = <&vdecsys CLK_VDEC_CKEN>,
+ <&vdecsys CLK_VDEC_LARB1_CKEN>;
+ clock-names = "apb", "smi";
+ };
+
vencsys: syscon@18000000 {
compatible = "mediatek,mt2712-vencsys", "syscon";
reg = <0 0x18000000 0 0x1000>;
#clock-cells = <1>;
};
+ larb3: larb@18001000 {
+ compatible = "mediatek,mt2712-smi-larb";
+ reg = <0 0x18001000 0 0x1000>;
+ mediatek,smi = <&smi_common0>;
+ mediatek,larb-id = <3>;
+ power-domains = <&scpsys MT2712_POWER_DOMAIN_VENC>;
+ clocks = <&vencsys CLK_VENC_SMI_COMMON_CON>,
+ <&vencsys CLK_VENC_VENC>;
+ clock-names = "apb", "smi";
+ };
+
+ larb6: larb@18002000 {
+ compatible = "mediatek,mt2712-smi-larb";
+ reg = <0 0x18002000 0 0x1000>;
+ mediatek,smi = <&smi_common0>;
+ mediatek,larb-id = <6>;
+ power-domains = <&scpsys MT2712_POWER_DOMAIN_VENC>;
+ clocks = <&vencsys CLK_VENC_SMI_COMMON_CON>,
+ <&vencsys CLK_VENC_VENC>;
+ clock-names = "apb", "smi";
+ };
+
jpgdecsys: syscon@19000000 {
compatible = "mediatek,mt2712-jpgdecsys", "syscon";
reg = <0 0x19000000 0 0x1000>;
--
1.9.1
Signed-off-by: YT Shen <[email protected]>
---
arch/arm64/boot/dts/mediatek/mt2712e.dtsi | 21 +++++++++++++++++++++
1 file changed, 21 insertions(+)
diff --git a/arch/arm64/boot/dts/mediatek/mt2712e.dtsi b/arch/arm64/boot/dts/mediatek/mt2712e.dtsi
index 4f0aa65..e8afb54 100644
--- a/arch/arm64/boot/dts/mediatek/mt2712e.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt2712e.dtsi
@@ -504,6 +504,27 @@
status = "disabled";
};
+ nandc: nfi@1100e000 {
+ compatible = "mediatek,mt2712-nfc";
+ reg = <0 0x1100e000 0 0x1000>;
+ interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&topckgen CLK_TOP_NFI2X_EN>, <&pericfg CLK_PERI_NFI>;
+ clock-names = "nfi_clk", "pad_clk";
+ ecc-engine = <&bch>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ bch: ecc@1100f000 {
+ compatible = "mediatek,mt2712-ecc";
+ reg = <0 0x1100f000 0 0x1000>;
+ interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&topckgen CLK_TOP_NFI1X_CK_EN>;
+ clock-names = "nfiecc_clk";
+ status = "disabled";
+ };
+
i2c3: i2c@11010000 {
compatible = "mediatek,mt2712-i2c";
reg = <0 0x11010000 0 0x90>,
--
1.9.1
From: Honghui Zhang <[email protected]>
This patch add device node for mt2712 pcie.
Signed-off-by: Honghui Zhang <[email protected]>
---
arch/arm64/boot/dts/mediatek/mt2712e.dtsi | 63 +++++++++++++++++++++++++++++++
1 file changed, 63 insertions(+)
diff --git a/arch/arm64/boot/dts/mediatek/mt2712e.dtsi b/arch/arm64/boot/dts/mediatek/mt2712e.dtsi
index e8afb54..976d92a 100644
--- a/arch/arm64/boot/dts/mediatek/mt2712e.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt2712e.dtsi
@@ -791,6 +791,69 @@
};
};
+ pcie: pcie@11700000 {
+ compatible = "mediatek,mt2712-pcie";
+ device_type = "pci";
+ reg = <0 0x11700000 0 0x1000>,
+ <0 0x112ff000 0 0x1000>;
+ reg-names = "port0", "port1";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&topckgen CLK_TOP_PE2_MAC_P0_SEL>,
+ <&topckgen CLK_TOP_PE2_MAC_P1_SEL>,
+ <&pericfg CLK_PERI_PCIE0>,
+ <&pericfg CLK_PERI_PCIE1>;
+ clock-names = "sys_ck0", "sys_ck1", "ahb_ck0", "ahb_ck1";
+ phys = <&u3port0 PHY_TYPE_PCIE>, <&u3port1 PHY_TYPE_PCIE>;
+ phy-names = "pcie-phy0", "pcie-phy1";
+ bus-range = <0x00 0xff>;
+ ranges = <0x82000000 0 0x20000000 0x0 0x20000000 0 0x10000000>;
+
+ pcie0: pcie@0,0 {
+ device_type = "pci";
+ status = "disabled";
+ reg = <0x0000 0 0 0 0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ ranges;
+ num-lanes = <1>;
+ interrupt-map-mask = <0 0 0 7>;
+ interrupt-map = <0 0 0 1 &pcie_intc0 0>,
+ <0 0 0 2 &pcie_intc0 1>,
+ <0 0 0 3 &pcie_intc0 2>,
+ <0 0 0 4 &pcie_intc0 3>;
+ pcie_intc0: interrupt-controller {
+ interrupt-controller;
+ #address-cells = <0>;
+ #interrupt-cells = <1>;
+ };
+ };
+
+ pcie1: pcie@1,0 {
+ device_type = "pci";
+ status = "disabled";
+ reg = <0x0800 0 0 0 0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ ranges;
+ num-lanes = <1>;
+ interrupt-map-mask = <0 0 0 7>;
+ interrupt-map = <0 0 0 1 &pcie_intc1 0>,
+ <0 0 0 2 &pcie_intc1 1>,
+ <0 0 0 3 &pcie_intc1 2>,
+ <0 0 0 4 &pcie_intc1 3>;
+ pcie_intc1: interrupt-controller {
+ interrupt-controller;
+ #address-cells = <0>;
+ #interrupt-cells = <1>;
+ };
+ };
+ };
+
mfgcfg: syscon@13000000 {
compatible = "mediatek,mt2712-mfgcfg", "syscon";
reg = <0 0x13000000 0 0x1000>;
--
1.9.1
Signed-off-by: YT Shen <[email protected]>
---
arch/arm64/boot/dts/mediatek/mt2712e.dtsi | 28 ++++++++++++++++++++++++++++
1 file changed, 28 insertions(+)
diff --git a/arch/arm64/boot/dts/mediatek/mt2712e.dtsi b/arch/arm64/boot/dts/mediatek/mt2712e.dtsi
index 4843376..e9856fe 100644
--- a/arch/arm64/boot/dts/mediatek/mt2712e.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt2712e.dtsi
@@ -418,6 +418,34 @@
status = "disabled";
};
+ pwm: pwm@11006000 {
+ compatible = "mediatek,mt2712-pwm";
+ reg = <0 0x11006000 0 0x1000>;
+ #pwm-cells = <2>;
+ interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&topckgen CLK_TOP_PWM_SEL>,
+ <&pericfg CLK_PERI_PWM>,
+ <&pericfg CLK_PERI_PWM0>,
+ <&pericfg CLK_PERI_PWM1>,
+ <&pericfg CLK_PERI_PWM2>,
+ <&pericfg CLK_PERI_PWM3>,
+ <&pericfg CLK_PERI_PWM4>,
+ <&pericfg CLK_PERI_PWM5>,
+ <&pericfg CLK_PERI_PWM6>,
+ <&pericfg CLK_PERI_PWM7>;
+ clock-names = "top",
+ "main",
+ "pwm1",
+ "pwm2",
+ "pwm3",
+ "pwm4",
+ "pwm5",
+ "pwm6",
+ "pwm7",
+ "pwm8";
+ status = "disabled";
+ };
+
i2c0: i2c@11007000 {
compatible = "mediatek,mt2712-i2c";
reg = <0 0x11007000 0 0x90>,
--
1.9.1
Signed-off-by: YT Shen <[email protected]>
---
arch/arm64/boot/dts/mediatek/mt2712e.dtsi | 90 +++++++++++++++++++++++++++++++
1 file changed, 90 insertions(+)
diff --git a/arch/arm64/boot/dts/mediatek/mt2712e.dtsi b/arch/arm64/boot/dts/mediatek/mt2712e.dtsi
index d429770..7bac8b6 100644
--- a/arch/arm64/boot/dts/mediatek/mt2712e.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt2712e.dtsi
@@ -418,6 +418,96 @@
status = "disabled";
};
+ i2c0: i2c@11007000 {
+ compatible = "mediatek,mt2712-i2c";
+ reg = <0 0x11007000 0 0x90>,
+ <0 0x11000180 0 0x80>;
+ interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_LOW>;
+ clock-div = <4>;
+ clocks = <&pericfg CLK_PERI_I2C0>,
+ <&pericfg CLK_PERI_AP_DMA>;
+ clock-names = "main",
+ "dma";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c1: i2c@11008000 {
+ compatible = "mediatek,mt2712-i2c";
+ reg = <0 0x11008000 0 0x90>,
+ <0 0x11000200 0 0x80>;
+ interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_LOW>;
+ clock-div = <4>;
+ clocks = <&pericfg CLK_PERI_I2C1>,
+ <&pericfg CLK_PERI_AP_DMA>;
+ clock-names = "main",
+ "dma";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c2: i2c@11009000 {
+ compatible = "mediatek,mt2712-i2c";
+ reg = <0 0x11009000 0 0x90>,
+ <0 0x11000280 0 0x80>;
+ interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_LOW>;
+ clock-div = <4>;
+ clocks = <&pericfg CLK_PERI_I2C2>,
+ <&pericfg CLK_PERI_AP_DMA>;
+ clock-names = "main",
+ "dma";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c3: i2c@11010000 {
+ compatible = "mediatek,mt2712-i2c";
+ reg = <0 0x11010000 0 0x90>,
+ <0 0x11000300 0 0x80>;
+ interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_LOW>;
+ clock-div = <4>;
+ clocks = <&pericfg CLK_PERI_I2C3>,
+ <&pericfg CLK_PERI_AP_DMA>;
+ clock-names = "main",
+ "dma";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c4: i2c@11011000 {
+ compatible = "mediatek,mt2712-i2c";
+ reg = <0 0x11011000 0 0x90>,
+ <0 0x11000380 0 0x80>;
+ interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_LOW>;
+ clock-div = <4>;
+ clocks = <&pericfg CLK_PERI_I2C4>,
+ <&pericfg CLK_PERI_AP_DMA>;
+ clock-names = "main",
+ "dma";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c5: i2c@11013000 {
+ compatible = "mediatek,mt2712-i2c";
+ reg = <0 0x11013000 0 0x90>,
+ <0 0x11000100 0 0x80>;
+ interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_LOW>;
+ clock-div = <4>;
+ clocks = <&pericfg CLK_PERI_I2C5>,
+ <&pericfg CLK_PERI_AP_DMA>;
+ clock-names = "main",
+ "dma";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
uart4: serial@11019000 {
compatible = "mediatek,mt2712-uart",
"mediatek,mt6577-uart";
--
1.9.1
Signed-off-by: YT Shen <[email protected]>
---
arch/arm64/boot/dts/mediatek/mt2712e.dtsi | 65 +++++++++++++++++++++++++++++++
1 file changed, 65 insertions(+)
diff --git a/arch/arm64/boot/dts/mediatek/mt2712e.dtsi b/arch/arm64/boot/dts/mediatek/mt2712e.dtsi
index 7bac8b6..4843376 100644
--- a/arch/arm64/boot/dts/mediatek/mt2712e.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt2712e.dtsi
@@ -463,6 +463,19 @@
status = "disabled";
};
+ spi0: spi@1100a000 {
+ compatible = "mediatek,mt2712-spi";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0 0x1100a000 0 0x100>;
+ interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&topckgen CLK_TOP_UNIVPLL2_D4>,
+ <&topckgen CLK_TOP_SPI_SEL>,
+ <&pericfg CLK_PERI_SPI0>;
+ clock-names = "parent-clk", "sel-clk", "spi-clk";
+ status = "disabled";
+ };
+
i2c3: i2c@11010000 {
compatible = "mediatek,mt2712-i2c";
reg = <0 0x11010000 0 0x90>,
@@ -508,6 +521,58 @@
status = "disabled";
};
+ spi2: spi@11015000 {
+ compatible = "mediatek,mt2712-spi";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0 0x11015000 0 0x100>;
+ interrupts = <GIC_SPI 284 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&topckgen CLK_TOP_UNIVPLL2_D4>,
+ <&topckgen CLK_TOP_SPI_SEL>,
+ <&pericfg CLK_PERI_SPI2>;
+ clock-names = "parent-clk", "sel-clk", "spi-clk";
+ status = "disabled";
+ };
+
+ spi3: spi@11016000 {
+ compatible = "mediatek,mt2712-spi";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0 0x11016000 0 0x100>;
+ interrupts = <GIC_SPI 285 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&topckgen CLK_TOP_UNIVPLL2_D4>,
+ <&topckgen CLK_TOP_SPI_SEL>,
+ <&pericfg CLK_PERI_SPI3>;
+ clock-names = "parent-clk", "sel-clk", "spi-clk";
+ status = "disabled";
+ };
+
+ spi4: spi@10012000 {
+ compatible = "mediatek,mt2712-spi";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0 0x10012000 0 0x100>;
+ interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&topckgen CLK_TOP_UNIVPLL2_D4>,
+ <&topckgen CLK_TOP_SPI_SEL>,
+ <&infracfg CLK_INFRA_AO_SPI0>;
+ clock-names = "parent-clk", "sel-clk", "spi-clk";
+ status = "disabled";
+ };
+
+ spi5: spi@11018000 {
+ compatible = "mediatek,mt2712-spi";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0 0x11018000 0 0x100>;
+ interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&topckgen CLK_TOP_UNIVPLL2_D4>,
+ <&topckgen CLK_TOP_SPI_SEL>,
+ <&pericfg CLK_PERI_SPI5>;
+ clock-names = "parent-clk", "sel-clk", "spi-clk";
+ status = "disabled";
+ };
+
uart4: serial@11019000 {
compatible = "mediatek,mt2712-uart",
"mediatek,mt6577-uart";
--
1.9.1
Signed-off-by: YT Shen <[email protected]>
---
arch/arm64/boot/dts/mediatek/mt2712e.dtsi | 34 +++++++++++++++++++++++++++++++
1 file changed, 34 insertions(+)
diff --git a/arch/arm64/boot/dts/mediatek/mt2712e.dtsi b/arch/arm64/boot/dts/mediatek/mt2712e.dtsi
index e9856fe..4f0aa65 100644
--- a/arch/arm64/boot/dts/mediatek/mt2712e.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt2712e.dtsi
@@ -611,6 +611,40 @@
status = "disabled";
};
+ mmc0: mmc@11230000 {
+ compatible = "mediatek,mt2712-mmc";
+ reg = <0 0x11230000 0 0x1000>;
+ interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&pericfg CLK_PERI_MSDC30_0>,
+ <&pericfg CLK_PERI_MSDC50_0_HCLK_EN>,
+ <&pericfg CLK_PERI_MSDC30_0_QTR_EN>,
+ <&pericfg CLK_PERI_MSDC50_0_EN>;
+ clock-names = "source", "hclk", "bus_clk", "source_cg";
+ status = "disabled";
+ };
+
+ mmc1: mmc@11240000 {
+ compatible = "mediatek,mt2712-mmc";
+ reg = <0 0x11240000 0 0x1000>;
+ interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&pericfg CLK_PERI_MSDC30_1>,
+ <&topckgen CLK_TOP_AXI_SEL>,
+ <&pericfg CLK_PERI_MSDC30_1_EN>;
+ clock-names = "source", "hclk", "source_cg";
+ status = "disabled";
+ };
+
+ mmc2: mmc@11250000 {
+ compatible = "mediatek,mt2712-mmc";
+ reg = <0 0x11250000 0 0x1000>;
+ interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&pericfg CLK_PERI_MSDC30_2>,
+ <&topckgen CLK_TOP_AXI_SEL>,
+ <&pericfg CLK_PERI_MSDC30_2_EN>;
+ clock-names = "source", "hclk", "source_cg";
+ status = "disabled";
+ };
+
ssusb: usb@11271000 {
compatible = "mediatek,mt2712-mtu3", "mediatek,mtu3";
reg = <0 0x11271000 0 0x3000>,
--
1.9.1
From: Chunfeng Yun <[email protected]>
This patch adds USB3 related nodes for mt2712m1 platform.
Signed-off-by: Chunfeng Yun <[email protected]>
---
arch/arm64/boot/dts/mediatek/mt2712-evb.dts | 98 ++++++++++++++++++++++
arch/arm64/boot/dts/mediatek/mt2712e.dtsi | 126 ++++++++++++++++++++++++++++
2 files changed, 224 insertions(+)
diff --git a/arch/arm64/boot/dts/mediatek/mt2712-evb.dts b/arch/arm64/boot/dts/mediatek/mt2712-evb.dts
index 98d6275..1353dad 100644
--- a/arch/arm64/boot/dts/mediatek/mt2712-evb.dts
+++ b/arch/arm64/boot/dts/mediatek/mt2712-evb.dts
@@ -6,6 +6,7 @@
*/
/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
#include "mt2712e.dtsi"
/ {
@@ -41,6 +42,53 @@
regulator-max-microvolt = <1000000>;
};
+ extcon_usb: extcon_iddig {
+ compatible = "linux,extcon-usb-gpio";
+ id-gpio = <&pio 12 GPIO_ACTIVE_HIGH>;
+ };
+
+ extcon_usb1: extcon_iddig1 {
+ compatible = "linux,extcon-usb-gpio";
+ id-gpio = <&pio 14 GPIO_ACTIVE_HIGH>;
+ };
+
+ usb_p0_vbus: regulator@2 {
+ compatible = "regulator-fixed";
+ regulator-name = "p0_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&pio 13 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ usb_p1_vbus: regulator@3 {
+ compatible = "regulator-fixed";
+ regulator-name = "p1_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&pio 15 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ usb_p2_vbus: regulator@4 {
+ compatible = "regulator-fixed";
+ regulator-name = "p2_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&pio 16 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ usb_p3_vbus: regulator@5 {
+ compatible = "regulator-fixed";
+ regulator-name = "p3_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&pio 17 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ regulator-always-on;
+ };
+
};
&auxadc {
@@ -59,7 +107,57 @@
proc-supply = <&cpus_fixed_vproc1>;
};
+&pio {
+ usb0_id_pins_float: usb0_iddig {
+ pins_iddig {
+ pinmux = <MT2712_PIN_12_IDDIG_P0__FUNC_IDDIG_A>;
+ bias-pull-up;
+ };
+ };
+
+ usb1_id_pins_float: usb1_iddig {
+ pins_iddig {
+ pinmux = <MT2712_PIN_14_IDDIG_P1__FUNC_IDDIG_B>;
+ bias-pull-up;
+ };
+ };
+};
+
+&ssusb {
+ vbus-supply = <&usb_p0_vbus>;
+ extcon = <&extcon_usb>;
+ dr_mode = "otg";
+ wakeup-source;
+ mediatek,u3p-dis-msk = <0x1>;
+ //enable-manual-drd;
+ //maximum-speed = "full-speed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb0_id_pins_float>;
+ status = "okay";
+};
+
+&ssusb1 {
+ vbus-supply = <&usb_p1_vbus>;
+ extcon = <&extcon_usb1>;
+ dr_mode = "otg";
+ //mediatek,u3p-dis-msk = <0x1>;
+ enable-manual-drd;
+ wakeup-source;
+ //maximum-speed = "full-speed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb1_id_pins_float>;
+ status = "okay";
+};
+
&uart0 {
status = "okay";
};
+&usb_host0 {
+ vbus-supply = <&usb_p2_vbus>;
+ status = "okay";
+};
+
+&usb_host1 {
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt2712e.dtsi b/arch/arm64/boot/dts/mediatek/mt2712e.dtsi
index ee627a7..6c228a2 100644
--- a/arch/arm64/boot/dts/mediatek/mt2712e.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt2712e.dtsi
@@ -8,6 +8,7 @@
#include <dt-bindings/clock/mt2712-clk.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/phy/phy.h>
#include <dt-bindings/power/mt2712-power.h>
#include "mt2712-pinfunc.h"
@@ -405,6 +406,131 @@
status = "disabled";
};
+ ssusb: usb@11271000 {
+ compatible = "mediatek,mt2712-mtu3", "mediatek,mtu3";
+ reg = <0 0x11271000 0 0x3000>,
+ <0 0x11280700 0 0x0100>;
+ reg-names = "mac", "ippc";
+ interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_LOW>;
+ phys = <&u2port0 PHY_TYPE_USB2>,
+ <&u2port1 PHY_TYPE_USB2>;
+ power-domains = <&scpsys MT2712_POWER_DOMAIN_USB>;
+ clocks = <&topckgen CLK_TOP_USB30_SEL>;
+ clock-names = "sys_ck";
+ mediatek,syscon-wakeup = <&pericfg 0x510 2>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+ status = "disabled";
+
+ usb_host0: xhci@11270000 {
+ compatible = "mediatek,mt2712-xhci",
+ "mediatek,mtk-xhci";
+ reg = <0 0x11270000 0 0x1000>;
+ reg-names = "mac";
+ interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_LOW>;
+ power-domains = <&scpsys MT2712_POWER_DOMAIN_USB>;
+ clocks = <&topckgen CLK_TOP_USB30_SEL>, <&clk26m>;
+ clock-names = "sys_ck", "ref_ck";
+ status = "disabled";
+ };
+ };
+
+ u3phy0: usb-phy@11290000 {
+ compatible = "mediatek,mt2712-u3phy";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+ status = "okay";
+
+ u2port0: usb-phy@11290000 {
+ reg = <0 0x11290000 0 0x700>;
+ clocks = <&clk26m>;
+ clock-names = "ref";
+ #phy-cells = <1>;
+ status = "okay";
+ };
+
+ u2port1: usb-phy@11298000 {
+ reg = <0 0x11298000 0 0x700>;
+ clocks = <&clk26m>;
+ clock-names = "ref";
+ #phy-cells = <1>;
+ status = "okay";
+ };
+
+ u3port0: usb-phy@11298700 {
+ reg = <0 0x11298700 0 0x900>;
+ clocks = <&clk26m>;
+ clock-names = "ref";
+ #phy-cells = <1>;
+ status = "okay";
+ };
+ };
+
+ ssusb1: usb@112c1000 {
+ compatible = "mediatek,mt2712-mtu3", "mediatek,mtu3";
+ reg = <0 0x112c1000 0 0x3000>,
+ <0 0x112d0700 0 0x0100>;
+ reg-names = "mac", "ippc";
+ interrupts = <GIC_SPI 248 IRQ_TYPE_LEVEL_LOW>;
+ phys = <&u2port2 PHY_TYPE_USB2>,
+ <&u2port3 PHY_TYPE_USB2>,
+ <&u3port1 PHY_TYPE_USB3>;
+ power-domains = <&scpsys MT2712_POWER_DOMAIN_USB2>;
+ clocks = <&topckgen CLK_TOP_USB30_SEL>;
+ clock-names = "sys_ck";
+ mediatek,syscon-wakeup = <&pericfg 0x514 2>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+ status = "disabled";
+
+ usb_host1: xhci@112c0000 {
+ compatible = "mediatek,mt2712-xhci",
+ "mediatek,mtk-xhci";
+ reg = <0 0x112c0000 0 0x1000>;
+ reg-names = "mac";
+ interrupts = <GIC_SPI 249 IRQ_TYPE_LEVEL_LOW>;
+ power-domains = <&scpsys MT2712_POWER_DOMAIN_USB2>;
+ clocks = <&topckgen CLK_TOP_USB30_SEL>, <&clk26m>;
+ clock-names = "sys_ck", "ref_ck";
+ status = "disabled";
+ };
+ };
+
+ u3phy1: usb-phy@112e0000 {
+ compatible = "mediatek,mt2712-u3phy";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+ status = "okay";
+
+ u2port2: usb-phy@112e0000 {
+ reg = <0 0x112e0000 0 0x700>;
+ clocks = <&clk26m>;
+ clock-names = "ref";
+ #phy-cells = <1>;
+ status = "okay";
+ };
+
+ u2port3: usb-phy@112e8000 {
+ reg = <0 0x112e8000 0 0x700>;
+ clocks = <&clk26m>;
+ clock-names = "ref";
+ #phy-cells = <1>;
+ status = "okay";
+ };
+
+ u3port1: usb-phy@112e8700 {
+ reg = <0 0x112e8700 0 0x900>;
+ clocks = <&clk26m>;
+ clock-names = "ref";
+ #phy-cells = <1>;
+ status = "okay";
+ };
+ };
+
mfgcfg: syscon@13000000 {
compatible = "mediatek,mt2712-mfgcfg", "syscon";
reg = <0 0x13000000 0 0x1000>;
--
1.9.1
On 03/12/2018 12:35, YT Shen wrote:
> This patch series based on v4.20-rc1, include MT2712 usb/iommu/smi/i2c/spi/pwm/mmc/nand/pcie device nodes
>
> Chunfeng Yun (1):
> arm64: dts: Add USB3 related nodes for MT2712
>
> Honghui Zhang (1):
> arm64: dts: add pcie nodes for MT2712
>
> YT Shen (6):
> arm64: dts: add iommu/smi nodes for MT2712
> arm64: dts: add i2c nodes for MT2712
> arm64: dts: add spi nodes for MT2712
> arm64: dts: add pwm nodes for MT2712
> arm64: dts: add mmc nodes for MT2712
> arm64: dts: add nand nodes for MT2712
>
All pushed to v5.0-next/dts64
Thanks,
Matthias
> arch/arm64/boot/dts/mediatek/mt2712-evb.dts | 98 +++++
> arch/arm64/boot/dts/mediatek/mt2712e.dtsi | 555 ++++++++++++++++++++++++++++
> 2 files changed, 653 insertions(+)
>