This patchset adds space around operators and removes
all the checkpatch warnings for the same from the files
present under drivers/staging/rtl8188eu/hal/ directory.
Shreeya Patel (11):
Staging: rtl8188eu: hal_com: Add space around operators
Staging: rtl8188eu: odm: Add space around operators
Staging: rtl8188eu: odm_hwconfig: Add space around operators
Staging: rtl8188eu: phy: Add space around operators
Staging: rtl8188eu: pwrseqcmd: Add space around operators
Staging: rtl8188eu: rf: Add space around operators
Staging: rtl8188eu: rf_cfg: Add space around operators
Staging: rtl8188eu: rtl8188e_cmd: Add space around operators
Staging: rtl8188eu: rtl8188e_hal_init: Add space around operators
Staging: rtl8188eu: rtl8188e_rxdesc: Add space around operators
Staging: rtl8188eu: rtl8188eu_xmit: Add space around operators
drivers/staging/rtl8188eu/hal/hal_com.c | 22 +--
drivers/staging/rtl8188eu/hal/odm.c | 48 +++---
drivers/staging/rtl8188eu/hal/odm_hwconfig.c | 54 +++----
drivers/staging/rtl8188eu/hal/phy.c | 138 +++++++++---------
drivers/staging/rtl8188eu/hal/pwrseqcmd.c | 2 +-
drivers/staging/rtl8188eu/hal/rf.c | 60 ++++----
drivers/staging/rtl8188eu/hal/rf_cfg.c | 4 +-
drivers/staging/rtl8188eu/hal/rtl8188e_cmd.c | 42 +++---
.../staging/rtl8188eu/hal/rtl8188e_hal_init.c | 44 +++---
.../staging/rtl8188eu/hal/rtl8188e_rxdesc.c | 2 +-
.../staging/rtl8188eu/hal/rtl8188eu_xmit.c | 32 ++--
11 files changed, 224 insertions(+), 224 deletions(-)
--
2.17.1
Add space around operators for improving the code
readability.
Reported by checkpatch.pl
git diff -w shows no difference.
diff of the .o files before and after the changes shows no difference.
Signed-off-by: Shreeya Patel <[email protected]>
---
shreeya@Shreeya-Patel:~git/kernels/staging$ git diff -w drivers/staging/rtl8188eu/hal/hal_com.c
shreeya@Shreeya-Patel:~git/kernels/staging$
shreeya@Shreeya-Patel:~git/kernels/staging/drivers/staging/rtl8188eu/hal$ diff hal_com_old.o hal_com.o
shreeya@Shreeya-Patel:~git/kernels/staging/drivers/staging/rtl8188eu/hal$
drivers/staging/rtl8188eu/hal/hal_com.c | 22 +++++++++++-----------
1 file changed, 11 insertions(+), 11 deletions(-)
diff --git a/drivers/staging/rtl8188eu/hal/hal_com.c b/drivers/staging/rtl8188eu/hal/hal_com.c
index 95f1b1431373..ebe19e076ff2 100644
--- a/drivers/staging/rtl8188eu/hal/hal_com.c
+++ b/drivers/staging/rtl8188eu/hal/hal_com.c
@@ -18,26 +18,26 @@ void dump_chip_info(struct HAL_VERSION chip_vers)
uint cnt = 0;
char buf[128];
- cnt += sprintf((buf+cnt), "Chip Version Info: CHIP_8188E_");
- cnt += sprintf((buf+cnt), "%s_", chip_vers.ChipType == NORMAL_CHIP ?
+ cnt += sprintf((buf + cnt), "Chip Version Info: CHIP_8188E_");
+ cnt += sprintf((buf + cnt), "%s_", chip_vers.ChipType == NORMAL_CHIP ?
"Normal_Chip" : "Test_Chip");
- cnt += sprintf((buf+cnt), "%s_", chip_vers.VendorType == CHIP_VENDOR_TSMC ?
+ cnt += sprintf((buf + cnt), "%s_", chip_vers.VendorType == CHIP_VENDOR_TSMC ?
"TSMC" : "UMC");
if (chip_vers.CUTVersion == A_CUT_VERSION)
- cnt += sprintf((buf+cnt), "A_CUT_");
+ cnt += sprintf((buf + cnt), "A_CUT_");
else if (chip_vers.CUTVersion == B_CUT_VERSION)
- cnt += sprintf((buf+cnt), "B_CUT_");
+ cnt += sprintf((buf + cnt), "B_CUT_");
else if (chip_vers.CUTVersion == C_CUT_VERSION)
- cnt += sprintf((buf+cnt), "C_CUT_");
+ cnt += sprintf((buf + cnt), "C_CUT_");
else if (chip_vers.CUTVersion == D_CUT_VERSION)
- cnt += sprintf((buf+cnt), "D_CUT_");
+ cnt += sprintf((buf + cnt), "D_CUT_");
else if (chip_vers.CUTVersion == E_CUT_VERSION)
- cnt += sprintf((buf+cnt), "E_CUT_");
+ cnt += sprintf((buf + cnt), "E_CUT_");
else
- cnt += sprintf((buf+cnt), "UNKNOWN_CUT(%d)_",
+ cnt += sprintf((buf + cnt), "UNKNOWN_CUT(%d)_",
chip_vers.CUTVersion);
- cnt += sprintf((buf+cnt), "1T1R_");
- cnt += sprintf((buf+cnt), "RomVer(0)\n");
+ cnt += sprintf((buf + cnt), "1T1R_");
+ cnt += sprintf((buf + cnt), "RomVer(0)\n");
pr_info("%s", buf);
}
--
2.17.1
Add space around operators for improving the code
readability.
Reported by checkpatch.pl
git diff -w shows no difference.
diff of the .o files before and after the changes shows no difference.
Signed-off-by: Shreeya Patel <[email protected]>
---
shreeya@Shreeya-Patel:~git/kernels/staging$ git diff -w drivers/staging/rtl8188eu/hal/odm.c
shreeya@Shreeya-Patel:~git/kernels/staging$
shreeya@Shreeya-Patel:~git/kernels/staging/drivers/staging/rtl8188eu/hal$ diff odm_old.o odm.o
shreeya@Shreeya-Patel:~git/kernels/staging/drivers/staging/rtl8188eu/hal$
drivers/staging/rtl8188eu/hal/odm.c | 48 ++++++++++++++---------------
1 file changed, 24 insertions(+), 24 deletions(-)
diff --git a/drivers/staging/rtl8188eu/hal/odm.c b/drivers/staging/rtl8188eu/hal/odm.c
index 7489491f5aaa..a6eb9798b6f8 100644
--- a/drivers/staging/rtl8188eu/hal/odm.c
+++ b/drivers/staging/rtl8188eu/hal/odm.c
@@ -342,7 +342,7 @@ void odm_DIG(struct odm_dm_struct *pDM_Odm)
u8 CurrentIGI = pDM_DigTable->CurIGValue;
ODM_RT_TRACE(pDM_Odm, ODM_COMP_DIG, ODM_DBG_LOUD, ("odm_DIG()==>\n"));
- if ((!(pDM_Odm->SupportAbility&ODM_BB_DIG)) || (!(pDM_Odm->SupportAbility&ODM_BB_FA_CNT))) {
+ if ((!(pDM_Odm->SupportAbility & ODM_BB_DIG)) || (!(pDM_Odm->SupportAbility & ODM_BB_FA_CNT))) {
ODM_RT_TRACE(pDM_Odm, ODM_COMP_DIG, ODM_DBG_LOUD,
("odm_DIG() Return: SupportAbility ODM_BB_DIG or ODM_BB_FA_CNT is disabled\n"));
return;
@@ -419,7 +419,7 @@ void odm_DIG(struct odm_dm_struct *pDM_Odm)
}
if (pDM_DigTable->LargeFAHit >= 3) {
- if ((pDM_DigTable->ForbiddenIGI+1) > pDM_DigTable->rx_gain_range_max)
+ if ((pDM_DigTable->ForbiddenIGI + 1) > pDM_DigTable->rx_gain_range_max)
pDM_DigTable->rx_gain_range_min = pDM_DigTable->rx_gain_range_max;
else
pDM_DigTable->rx_gain_range_min = (pDM_DigTable->ForbiddenIGI + 1);
@@ -432,7 +432,7 @@ void odm_DIG(struct odm_dm_struct *pDM_Odm)
pDM_DigTable->Recover_cnt--;
} else {
if (pDM_DigTable->LargeFAHit < 3) {
- if ((pDM_DigTable->ForbiddenIGI-1) < DIG_Dynamic_MIN) { /* DM_DIG_MIN) */
+ if ((pDM_DigTable->ForbiddenIGI - 1) < DIG_Dynamic_MIN) { /* DM_DIG_MIN) */
pDM_DigTable->ForbiddenIGI = DIG_Dynamic_MIN; /* DM_DIG_MIN; */
pDM_DigTable->rx_gain_range_min = DIG_Dynamic_MIN; /* DM_DIG_MIN; */
ODM_RT_TRACE(pDM_Odm, ODM_COMP_DIG, ODM_DBG_LOUD, ("odm_DIG(): Normal Case: At Lower Bound\n"));
@@ -518,24 +518,24 @@ void odm_FalseAlarmCounterStatistics(struct odm_dm_struct *pDM_Odm)
phy_set_bb_reg(adapter, ODM_REG_OFDM_FA_RSTD_11N, BIT(31), 1); /* hold page D counter */
ret_value = phy_query_bb_reg(adapter, ODM_REG_OFDM_FA_TYPE1_11N, bMaskDWord);
- FalseAlmCnt->Cnt_Fast_Fsync = (ret_value&0xffff);
- FalseAlmCnt->Cnt_SB_Search_fail = (ret_value & 0xffff0000)>>16;
+ FalseAlmCnt->Cnt_Fast_Fsync = (ret_value & 0xffff);
+ FalseAlmCnt->Cnt_SB_Search_fail = (ret_value & 0xffff0000) >> 16;
ret_value = phy_query_bb_reg(adapter, ODM_REG_OFDM_FA_TYPE2_11N, bMaskDWord);
- FalseAlmCnt->Cnt_OFDM_CCA = (ret_value&0xffff);
- FalseAlmCnt->Cnt_Parity_Fail = (ret_value & 0xffff0000)>>16;
+ FalseAlmCnt->Cnt_OFDM_CCA = (ret_value & 0xffff);
+ FalseAlmCnt->Cnt_Parity_Fail = (ret_value & 0xffff0000) >> 16;
ret_value = phy_query_bb_reg(adapter, ODM_REG_OFDM_FA_TYPE3_11N, bMaskDWord);
- FalseAlmCnt->Cnt_Rate_Illegal = (ret_value&0xffff);
- FalseAlmCnt->Cnt_Crc8_fail = (ret_value & 0xffff0000)>>16;
+ FalseAlmCnt->Cnt_Rate_Illegal = (ret_value & 0xffff);
+ FalseAlmCnt->Cnt_Crc8_fail = (ret_value & 0xffff0000) >> 16;
ret_value = phy_query_bb_reg(adapter, ODM_REG_OFDM_FA_TYPE4_11N, bMaskDWord);
- FalseAlmCnt->Cnt_Mcs_fail = (ret_value&0xffff);
+ FalseAlmCnt->Cnt_Mcs_fail = (ret_value & 0xffff);
FalseAlmCnt->Cnt_Ofdm_fail = FalseAlmCnt->Cnt_Parity_Fail + FalseAlmCnt->Cnt_Rate_Illegal +
FalseAlmCnt->Cnt_Crc8_fail + FalseAlmCnt->Cnt_Mcs_fail +
FalseAlmCnt->Cnt_Fast_Fsync + FalseAlmCnt->Cnt_SB_Search_fail;
ret_value = phy_query_bb_reg(adapter, ODM_REG_SC_CNT_11N, bMaskDWord);
- FalseAlmCnt->Cnt_BW_LSC = (ret_value&0xffff);
- FalseAlmCnt->Cnt_BW_USC = (ret_value & 0xffff0000)>>16;
+ FalseAlmCnt->Cnt_BW_LSC = (ret_value & 0xffff);
+ FalseAlmCnt->Cnt_BW_USC = (ret_value & 0xffff0000) >> 16;
/* hold cck counter */
phy_set_bb_reg(adapter, ODM_REG_CCK_FA_RST_11N, BIT(12), 1);
@@ -544,10 +544,10 @@ void odm_FalseAlarmCounterStatistics(struct odm_dm_struct *pDM_Odm)
ret_value = phy_query_bb_reg(adapter, ODM_REG_CCK_FA_LSB_11N, bMaskByte0);
FalseAlmCnt->Cnt_Cck_fail = ret_value;
ret_value = phy_query_bb_reg(adapter, ODM_REG_CCK_FA_MSB_11N, bMaskByte3);
- FalseAlmCnt->Cnt_Cck_fail += (ret_value & 0xff)<<8;
+ FalseAlmCnt->Cnt_Cck_fail += (ret_value & 0xff) << 8;
ret_value = phy_query_bb_reg(adapter, ODM_REG_CCK_CCA_CNT_11N, bMaskDWord);
- FalseAlmCnt->Cnt_CCK_CCA = ((ret_value&0xFF)<<8) | ((ret_value&0xFF00)>>8);
+ FalseAlmCnt->Cnt_CCK_CCA = ((ret_value & 0xFF) << 8) | ((ret_value & 0xFF00) >> 8);
FalseAlmCnt->Cnt_all = (FalseAlmCnt->Cnt_Fast_Fsync +
FalseAlmCnt->Cnt_SB_Search_fail +
@@ -583,7 +583,7 @@ void odm_CCKPacketDetectionThresh(struct odm_dm_struct *pDM_Odm)
u8 CurCCK_CCAThres;
struct false_alarm_stats *FalseAlmCnt = &(pDM_Odm->FalseAlmCnt);
- if (!(pDM_Odm->SupportAbility & (ODM_BB_CCK_PD|ODM_BB_FA_CNT)))
+ if (!(pDM_Odm->SupportAbility & (ODM_BB_CCK_PD | ODM_BB_FA_CNT)))
return;
if (pDM_Odm->ExtLNA)
return;
@@ -630,10 +630,10 @@ void ODM_RF_Saving(struct odm_dm_struct *pDM_Odm, u8 bForceInNormal)
Rssi_Low_bound = 45;
}
if (pDM_PSTable->initialize == 0) {
- pDM_PSTable->Reg874 = (phy_query_bb_reg(adapter, 0x874, bMaskDWord)&0x1CC000)>>14;
- pDM_PSTable->RegC70 = (phy_query_bb_reg(adapter, 0xc70, bMaskDWord) & BIT(3))>>3;
- pDM_PSTable->Reg85C = (phy_query_bb_reg(adapter, 0x85c, bMaskDWord)&0xFF000000)>>24;
- pDM_PSTable->RegA74 = (phy_query_bb_reg(adapter, 0xa74, bMaskDWord)&0xF000)>>12;
+ pDM_PSTable->Reg874 = (phy_query_bb_reg(adapter, 0x874, bMaskDWord) & 0x1CC000) >> 14;
+ pDM_PSTable->RegC70 = (phy_query_bb_reg(adapter, 0xc70, bMaskDWord) & BIT(3)) >> 3;
+ pDM_PSTable->Reg85C = (phy_query_bb_reg(adapter, 0x85c, bMaskDWord) & 0xFF000000) >> 24;
+ pDM_PSTable->RegA74 = (phy_query_bb_reg(adapter, 0xa74, bMaskDWord) & 0xF000) >> 12;
pDM_PSTable->initialize = 1;
}
@@ -718,13 +718,13 @@ u32 ODM_Get_Rate_Bitmap(struct odm_dm_struct *pDM_Odm, u32 macid, u32 ra_mask, u
else
rate_bitmap = 0x0000000f;
break;
- case (ODM_WM_A|ODM_WM_G):
+ case (ODM_WM_A | ODM_WM_G):
if (rssi_level == DM_RATR_STA_HIGH)
rate_bitmap = 0x00000f00;
else
rate_bitmap = 0x00000ff0;
break;
- case (ODM_WM_B|ODM_WM_G):
+ case (ODM_WM_B | ODM_WM_G):
if (rssi_level == DM_RATR_STA_HIGH)
rate_bitmap = 0x00000f00;
else if (rssi_level == DM_RATR_STA_MIDDLE)
@@ -732,8 +732,8 @@ u32 ODM_Get_Rate_Bitmap(struct odm_dm_struct *pDM_Odm, u32 macid, u32 ra_mask, u
else
rate_bitmap = 0x00000ff5;
break;
- case (ODM_WM_B|ODM_WM_G|ODM_WM_N24G):
- case (ODM_WM_A|ODM_WM_B|ODM_WM_G|ODM_WM_N24G):
+ case (ODM_WM_B | ODM_WM_G | ODM_WM_N24G):
+ case (ODM_WM_A | ODM_WM_B | ODM_WM_G | ODM_WM_N24G):
if (rssi_level == DM_RATR_STA_HIGH) {
rate_bitmap = 0x000f0000;
} else if (rssi_level == DM_RATR_STA_MIDDLE) {
@@ -911,7 +911,7 @@ void odm_RSSIMonitorCheckCE(struct odm_dm_struct *pDM_Odm)
if (psta->rssi_stat.UndecoratedSmoothedPWDB > tmpEntryMaxPWDB)
tmpEntryMaxPWDB = psta->rssi_stat.UndecoratedSmoothedPWDB;
if (psta->rssi_stat.UndecoratedSmoothedPWDB != (-1))
- PWDB_rssi[sta_cnt++] = (psta->mac_id | (psta->rssi_stat.UndecoratedSmoothedPWDB<<16));
+ PWDB_rssi[sta_cnt++] = (psta->mac_id | (psta->rssi_stat.UndecoratedSmoothedPWDB << 16));
}
}
--
2.17.1
Add space around operators for improving the code
readability.
Reported by checkpatch.pl
git diff -w shows no difference.
diff of the .o files before and after the changes shows no difference.
Signed-off-by: Shreeya Patel <[email protected]>
---
shreeya@Shreeya-Patel:~git/kernels/staging$ git diff -w drivers/staging/rtl8188eu/hal/odm_hwconfig.c
shreeya@Shreeya-Patel:~git/kernels/staging$
shreeya@Shreeya-Patel:~git/kernels/staging/drivers/staging/rtl8188eu/hal$ diff odm_hwconfig_old.o odm_hwconfig.o
shreeya@Shreeya-Patel:~git/kernels/staging/drivers/staging/rtl8188eu/hal$
drivers/staging/rtl8188eu/hal/odm_hwconfig.c | 54 ++++++++++----------
1 file changed, 27 insertions(+), 27 deletions(-)
diff --git a/drivers/staging/rtl8188eu/hal/odm_hwconfig.c b/drivers/staging/rtl8188eu/hal/odm_hwconfig.c
index d5a9ac51e907..a6f2731b076d 100644
--- a/drivers/staging/rtl8188eu/hal/odm_hwconfig.c
+++ b/drivers/staging/rtl8188eu/hal/odm_hwconfig.c
@@ -103,33 +103,33 @@ static void odm_RxPhyStatus92CSeries_Parsing(struct odm_dm_struct *dm_odm,
switch (LNA_idx) {
case 7:
if (VGA_idx <= 27)
- rx_pwr_all = -100 + 2 * (27-VGA_idx); /* VGA_idx = 27~2 */
+ rx_pwr_all = -100 + 2 * (27 - VGA_idx); /* VGA_idx = 27~2 */
else
rx_pwr_all = -100;
break;
case 6:
- rx_pwr_all = -48 + 2 * (2-VGA_idx); /* VGA_idx = 2~0 */
+ rx_pwr_all = -48 + 2 * (2 - VGA_idx); /* VGA_idx = 2~0 */
break;
case 5:
- rx_pwr_all = -42 + 2 * (7-VGA_idx); /* VGA_idx = 7~5 */
+ rx_pwr_all = -42 + 2 * (7 - VGA_idx); /* VGA_idx = 7~5 */
break;
case 4:
- rx_pwr_all = -36 + 2 * (7-VGA_idx); /* VGA_idx = 7~4 */
+ rx_pwr_all = -36 + 2 * (7 - VGA_idx); /* VGA_idx = 7~4 */
break;
case 3:
- rx_pwr_all = -24 + 2 * (7-VGA_idx); /* VGA_idx = 7~0 */
+ rx_pwr_all = -24 + 2 * (7 - VGA_idx); /* VGA_idx = 7~0 */
break;
case 2:
if (cck_highpwr)
- rx_pwr_all = -12 + 2 * (5-VGA_idx); /* VGA_idx = 5~0 */
+ rx_pwr_all = -12 + 2 * (5 - VGA_idx); /* VGA_idx = 5~0 */
else
- rx_pwr_all = -6 + 2 * (5-VGA_idx);
+ rx_pwr_all = -6 + 2 * (5 - VGA_idx);
break;
case 1:
- rx_pwr_all = 8-2 * VGA_idx;
+ rx_pwr_all = 8 - 2 * VGA_idx;
break;
case 0:
- rx_pwr_all = 14-2 * VGA_idx;
+ rx_pwr_all = 14 - 2 * VGA_idx;
break;
default:
break;
@@ -138,7 +138,7 @@ static void odm_RxPhyStatus92CSeries_Parsing(struct odm_dm_struct *dm_odm,
PWDB_ALL = odm_query_rxpwrpercentage(rx_pwr_all);
if (!cck_highpwr) {
if (PWDB_ALL >= 80)
- PWDB_ALL = ((PWDB_ALL-80)<<1) + ((PWDB_ALL-80)>>1) + 80;
+ PWDB_ALL = ((PWDB_ALL - 80) << 1) + ((PWDB_ALL - 80) >> 1) + 80;
else if ((PWDB_ALL <= 78) && (PWDB_ALL >= 20))
PWDB_ALL += 3;
if (PWDB_ALL > 100)
@@ -162,7 +162,7 @@ static void odm_RxPhyStatus92CSeries_Parsing(struct odm_dm_struct *dm_odm,
else if (SQ_rpt < 20)
SQ = 100;
else
- SQ = ((64-SQ_rpt) * 100) / 44;
+ SQ = ((64 - SQ_rpt) * 100) / 44;
}
pPhyInfo->SignalQuality = SQ;
pPhyInfo->RxMIMOSignalQuality[RF_PATH_A] = SQ;
@@ -200,8 +200,8 @@ static void odm_RxPhyStatus92CSeries_Parsing(struct odm_dm_struct *dm_odm,
pPhyInfo->RxMIMOSignalStrength[i] = (u8)RSSI;
/* Get Rx snr value in DB */
- pPhyInfo->RxSNR[i] = (s32)(pPhyStaRpt->path_rxsnr[i]/2);
- dm_odm->PhyDbgInfo.RxSNRdB[i] = (s32)(pPhyStaRpt->path_rxsnr[i]/2);
+ pPhyInfo->RxSNR[i] = (s32)(pPhyStaRpt->path_rxsnr[i] / 2);
+ dm_odm->PhyDbgInfo.RxSNRdB[i] = (s32)(pPhyStaRpt->path_rxsnr[i] / 2);
}
/* (2)PWDB, Average PWDB calculated by hardware (for rate adaptive) */
rx_pwr_all = (((pPhyStaRpt->cck_sig_qual_ofdm_pwdb_all) >> 1) & 0x7f) - 110;
@@ -280,8 +280,8 @@ static void odm_Process_RSSIForDM(struct odm_dm_struct *dm_odm,
if (dm_odm->AntDivType == CG_TRX_SMART_ANTDIV) {
if (pDM_FatTable->FAT_State == FAT_TRAINING_STATE) {
if (pPktinfo->bPacketToSelf) {
- antsel_tr_mux = (pDM_FatTable->antsel_rx_keep_2<<2) |
- (pDM_FatTable->antsel_rx_keep_1<<1) |
+ antsel_tr_mux = (pDM_FatTable->antsel_rx_keep_2 << 2) |
+ (pDM_FatTable->antsel_rx_keep_1 << 1) |
pDM_FatTable->antsel_rx_keep_0;
pDM_FatTable->antSumRSSI[antsel_tr_mux] += pPhyInfo->RxPWDBAll;
pDM_FatTable->antRSSIcnt[antsel_tr_mux]++;
@@ -289,8 +289,8 @@ static void odm_Process_RSSIForDM(struct odm_dm_struct *dm_odm,
}
} else if ((dm_odm->AntDivType == CG_TRX_HW_ANTDIV) || (dm_odm->AntDivType == CGCS_RX_HW_ANTDIV)) {
if (pPktinfo->bPacketToSelf || pPktinfo->bPacketBeacon) {
- antsel_tr_mux = (pDM_FatTable->antsel_rx_keep_2<<2) |
- (pDM_FatTable->antsel_rx_keep_1<<1) | pDM_FatTable->antsel_rx_keep_0;
+ antsel_tr_mux = (pDM_FatTable->antsel_rx_keep_2 << 2) |
+ (pDM_FatTable->antsel_rx_keep_1 << 1) | pDM_FatTable->antsel_rx_keep_0;
rtl88eu_dm_ant_sel_statistics(dm_odm, antsel_tr_mux, pPktinfo->StationID, pPhyInfo->RxPWDBAll);
}
}
@@ -328,17 +328,17 @@ static void odm_Process_RSSIForDM(struct odm_dm_struct *dm_odm,
} else {
if (pPhyInfo->RxPWDBAll > (u32)UndecoratedSmoothedOFDM) {
UndecoratedSmoothedOFDM =
- (((UndecoratedSmoothedOFDM) * (Rx_Smooth_Factor-1)) +
+ (((UndecoratedSmoothedOFDM) * (Rx_Smooth_Factor - 1)) +
(RSSI_Ave)) / (Rx_Smooth_Factor);
UndecoratedSmoothedOFDM = UndecoratedSmoothedOFDM + 1;
} else {
UndecoratedSmoothedOFDM =
- (((UndecoratedSmoothedOFDM) * (Rx_Smooth_Factor-1)) +
+ (((UndecoratedSmoothedOFDM) * (Rx_Smooth_Factor - 1)) +
(RSSI_Ave)) / (Rx_Smooth_Factor);
}
}
- pEntry->rssi_stat.PacketMap = (pEntry->rssi_stat.PacketMap<<1) | BIT(0);
+ pEntry->rssi_stat.PacketMap = (pEntry->rssi_stat.PacketMap << 1) | BIT(0);
} else {
RSSI_Ave = pPhyInfo->RxPWDBAll;
@@ -349,16 +349,16 @@ static void odm_Process_RSSIForDM(struct odm_dm_struct *dm_odm,
} else {
if (pPhyInfo->RxPWDBAll > (u32)UndecoratedSmoothedCCK) {
UndecoratedSmoothedCCK =
- ((UndecoratedSmoothedCCK * (Rx_Smooth_Factor-1)) +
+ ((UndecoratedSmoothedCCK * (Rx_Smooth_Factor - 1)) +
pPhyInfo->RxPWDBAll) / Rx_Smooth_Factor;
UndecoratedSmoothedCCK = UndecoratedSmoothedCCK + 1;
} else {
UndecoratedSmoothedCCK =
- ((UndecoratedSmoothedCCK * (Rx_Smooth_Factor-1)) +
+ ((UndecoratedSmoothedCCK * (Rx_Smooth_Factor - 1)) +
pPhyInfo->RxPWDBAll) / Rx_Smooth_Factor;
}
}
- pEntry->rssi_stat.PacketMap = pEntry->rssi_stat.PacketMap<<1;
+ pEntry->rssi_stat.PacketMap = pEntry->rssi_stat.PacketMap << 1;
}
/* 2011.07.28 LukeLee: modified to prevent unstable CCK RSSI */
if (pEntry->rssi_stat.ValidBit >= 64)
@@ -367,16 +367,16 @@ static void odm_Process_RSSIForDM(struct odm_dm_struct *dm_odm,
pEntry->rssi_stat.ValidBit++;
for (i = 0; i < pEntry->rssi_stat.ValidBit; i++)
- OFDM_pkt += (u8)(pEntry->rssi_stat.PacketMap>>i) & BIT(0);
+ OFDM_pkt += (u8)(pEntry->rssi_stat.PacketMap >> i) & BIT(0);
if (pEntry->rssi_stat.ValidBit == 64) {
Weighting = min_t(u32, OFDM_pkt << 4, 64);
- UndecoratedSmoothedPWDB = (Weighting * UndecoratedSmoothedOFDM + (64-Weighting) * UndecoratedSmoothedCCK)>>6;
+ UndecoratedSmoothedPWDB = (Weighting * UndecoratedSmoothedOFDM + (64 - Weighting) * UndecoratedSmoothedCCK) >> 6;
} else {
if (pEntry->rssi_stat.ValidBit != 0)
UndecoratedSmoothedPWDB = (OFDM_pkt * UndecoratedSmoothedOFDM +
- (pEntry->rssi_stat.ValidBit-OFDM_pkt) *
- UndecoratedSmoothedCCK)/pEntry->rssi_stat.ValidBit;
+ (pEntry->rssi_stat.ValidBit - OFDM_pkt) *
+ UndecoratedSmoothedCCK) / pEntry->rssi_stat.ValidBit;
else
UndecoratedSmoothedPWDB = 0;
}
--
2.17.1
Add space around operators for improving the code
readability.
Reported by checkpatch.pl
git diff -w shows no difference.
diff of the .o files before and after the changes shows no difference.
Signed-off-by: Shreeya Patel <[email protected]>
---
shreeya@Shreeya-Patel:~git/kernels/staging$ git diff -w drivers/staging/rtl8188eu/hal/phy.c
shreeya@Shreeya-Patel:~git/kernels/staging$
shreeya@Shreeya-Patel:~git/kernels/staging/drivers/staging/rtl8188eu/hal$ diff phy_old.o phy.o
shreeya@Shreeya-Patel:~git/kernels/staging/drivers/staging/rtl8188eu/hal$
drivers/staging/rtl8188eu/hal/phy.c | 138 ++++++++++++++--------------
1 file changed, 69 insertions(+), 69 deletions(-)
diff --git a/drivers/staging/rtl8188eu/hal/phy.c b/drivers/staging/rtl8188eu/hal/phy.c
index afaf9e55195a..b9025815b682 100644
--- a/drivers/staging/rtl8188eu/hal/phy.c
+++ b/drivers/staging/rtl8188eu/hal/phy.c
@@ -69,10 +69,10 @@ static u32 rf_serial_read(struct adapter *adapt,
bMaskDWord);
tmplong2 = (tmplong2 & (~bLSSIReadAddress)) |
- (offset<<23) | bLSSIReadEdge;
+ (offset << 23) | bLSSIReadEdge;
phy_set_bb_reg(adapt, rFPGA0_XA_HSSIParameter2, bMaskDWord,
- tmplong&(~bLSSIReadEdge));
+ tmplong & (~bLSSIReadEdge));
udelay(10);
phy_set_bb_reg(adapt, phyreg->rfHSSIPara2, bMaskDWord, tmplong2);
@@ -102,7 +102,7 @@ static void rf_serial_write(struct adapter *adapt,
struct bb_reg_def *phyreg = &adapt->HalData->PHYRegDef[rfpath];
offset &= 0xff;
- data_and_addr = ((offset<<20) | (data&0x000fffff)) & 0x0fffffff;
+ data_and_addr = ((offset << 20) | (data & 0x000fffff)) & 0x0fffffff;
phy_set_bb_reg(adapt, phyreg->rf3wireOffset, bMaskDWord, data_and_addr);
}
@@ -143,20 +143,20 @@ static void get_tx_power_index(struct adapter *adapt, u8 channel, u8 *cck_pwr,
for (TxCount = 0; TxCount < path_nums; TxCount++) {
if (TxCount == RF_PATH_A) {
cck_pwr[TxCount] = hal_data->Index24G_CCK_Base[TxCount][index];
- ofdm_pwr[TxCount] = hal_data->Index24G_BW40_Base[RF_PATH_A][index]+
+ ofdm_pwr[TxCount] = hal_data->Index24G_BW40_Base[RF_PATH_A][index] +
hal_data->OFDM_24G_Diff[TxCount][RF_PATH_A];
- bw20_pwr[TxCount] = hal_data->Index24G_BW40_Base[RF_PATH_A][index]+
+ bw20_pwr[TxCount] = hal_data->Index24G_BW40_Base[RF_PATH_A][index] +
hal_data->BW20_24G_Diff[TxCount][RF_PATH_A];
bw40_pwr[TxCount] = hal_data->Index24G_BW40_Base[TxCount][index];
} else if (TxCount == RF_PATH_B) {
cck_pwr[TxCount] = hal_data->Index24G_CCK_Base[TxCount][index];
- ofdm_pwr[TxCount] = hal_data->Index24G_BW40_Base[RF_PATH_A][index]+
- hal_data->BW20_24G_Diff[RF_PATH_A][index]+
+ ofdm_pwr[TxCount] = hal_data->Index24G_BW40_Base[RF_PATH_A][index] +
+ hal_data->BW20_24G_Diff[RF_PATH_A][index] +
hal_data->BW20_24G_Diff[TxCount][index];
- bw20_pwr[TxCount] = hal_data->Index24G_BW40_Base[RF_PATH_A][index]+
- hal_data->BW20_24G_Diff[TxCount][RF_PATH_A]+
+ bw20_pwr[TxCount] = hal_data->Index24G_BW40_Base[RF_PATH_A][index] +
+ hal_data->BW20_24G_Diff[TxCount][RF_PATH_A] +
hal_data->BW20_24G_Diff[TxCount][index];
bw40_pwr[TxCount] = hal_data->Index24G_BW40_Base[TxCount][index];
}
@@ -205,7 +205,7 @@ static void phy_set_bw_mode_callback(struct adapter *adapt)
/* Set MAC register */
reg_bw_opmode = usb_read8(adapt, REG_BWOPMODE);
- reg_prsr_rsc = usb_read8(adapt, REG_RRSR+2);
+ reg_prsr_rsc = usb_read8(adapt, REG_RRSR + 2);
switch (hal_data->CurrentChannelBW) {
case HT_CHANNEL_WIDTH_20:
@@ -215,9 +215,9 @@ static void phy_set_bw_mode_callback(struct adapter *adapt)
case HT_CHANNEL_WIDTH_40:
reg_bw_opmode &= ~BW_OPMODE_20MHZ;
usb_write8(adapt, REG_BWOPMODE, reg_bw_opmode);
- reg_prsr_rsc = (reg_prsr_rsc&0x90) |
- (hal_data->nCur40MhzPrimeSC<<5);
- usb_write8(adapt, REG_RRSR+2, reg_prsr_rsc);
+ reg_prsr_rsc = (reg_prsr_rsc & 0x90) |
+ (hal_data->nCur40MhzPrimeSC << 5);
+ usb_write8(adapt, REG_RRSR + 2, reg_prsr_rsc);
break;
default:
break;
@@ -236,7 +236,7 @@ static void phy_set_bw_mode_callback(struct adapter *adapt)
* These settings are required only for 40MHz
*/
phy_set_bb_reg(adapt, rCCK0_System, bCCKSideBand,
- (hal_data->nCur40MhzPrimeSC>>1));
+ (hal_data->nCur40MhzPrimeSC >> 1));
phy_set_bb_reg(adapt, rOFDM1_LSTF, 0xC00,
hal_data->nCur40MhzPrimeSC);
phy_set_bb_reg(adapt, 0x818, (BIT(26) | BIT(27)),
@@ -337,8 +337,8 @@ void rtl88eu_dm_txpower_track_adjust(struct odm_dm_struct *dm_odm, u8 type,
if (pwr_value >= ODM_TXPWRTRACK_MAX_IDX_88E && *direction == 1)
pwr_value = ODM_TXPWRTRACK_MAX_IDX_88E;
- *out_write_val = pwr_value | (pwr_value<<8) | (pwr_value<<16) |
- (pwr_value<<24);
+ *out_write_val = pwr_value | (pwr_value << 8) | (pwr_value << 16) |
+ (pwr_value << 24);
}
static void dm_txpwr_track_setpwr(struct odm_dm_struct *dm_odm)
@@ -389,9 +389,9 @@ void rtl88eu_dm_txpower_tracking_callback_thermalmeter(struct adapter *adapt)
if (thermal_val) {
/* Query OFDM path A default setting */
- ele_d = phy_query_bb_reg(adapt, rOFDM0_XATxIQImbalance, bMaskDWord)&bMaskOFDM_D;
+ ele_d = phy_query_bb_reg(adapt, rOFDM0_XATxIQImbalance, bMaskDWord) & bMaskOFDM_D;
for (i = 0; i < OFDM_TABLE_SIZE_92D; i++) {
- if (ele_d == (OFDMSwingTable[i]&bMaskOFDM_D)) {
+ if (ele_d == (OFDMSwingTable[i] & bMaskOFDM_D)) {
ofdm_index_old[0] = (u8)i;
dm_odm->BbSwingIdxOfdmBase = (u8)i;
break;
@@ -472,18 +472,18 @@ void rtl88eu_dm_txpower_tracking_callback_thermalmeter(struct adapter *adapt)
}
}
if (offset >= index_mapping_NUM_88E)
- offset = index_mapping_NUM_88E-1;
+ offset = index_mapping_NUM_88E - 1;
/* Updating ofdm_index values with new OFDM / CCK offset */
ofdm_index[0] = dm_odm->RFCalibrateInfo.OFDM_index[0] + ofdm_index_mapping[j][offset];
- if (ofdm_index[0] > OFDM_TABLE_SIZE_92D-1)
- ofdm_index[0] = OFDM_TABLE_SIZE_92D-1;
+ if (ofdm_index[0] > OFDM_TABLE_SIZE_92D - 1)
+ ofdm_index[0] = OFDM_TABLE_SIZE_92D - 1;
else if (ofdm_index[0] < ofdm_min_index)
ofdm_index[0] = ofdm_min_index;
cck_index = dm_odm->RFCalibrateInfo.CCK_index + ofdm_index_mapping[j][offset];
- if (cck_index > CCK_TABLE_SIZE-1)
- cck_index = CCK_TABLE_SIZE-1;
+ if (cck_index > CCK_TABLE_SIZE - 1)
+ cck_index = CCK_TABLE_SIZE - 1;
else if (cck_index < 0)
cck_index = 0;
@@ -548,8 +548,8 @@ static u8 phy_path_a_iqk(struct adapter *adapt, bool config_pathb)
reg_e9c = phy_query_bb_reg(adapt, rTx_Power_After_IQK_A, bMaskDWord);
if (!(reg_eac & BIT(28)) &&
- (((reg_e94 & 0x03FF0000)>>16) != 0x142) &&
- (((reg_e9c & 0x03FF0000)>>16) != 0x42))
+ (((reg_e94 & 0x03FF0000) >> 16) != 0x142) &&
+ (((reg_e9c & 0x03FF0000) >> 16) != 0x42))
result |= 0x01;
return result;
}
@@ -600,13 +600,13 @@ static u8 phy_path_a_rx_iqk(struct adapter *adapt, bool configPathB)
reg_e9c = phy_query_bb_reg(adapt, rTx_Power_After_IQK_A, bMaskDWord);
if (!(reg_eac & BIT(28)) &&
- (((reg_e94 & 0x03FF0000)>>16) != 0x142) &&
- (((reg_e9c & 0x03FF0000)>>16) != 0x42))
+ (((reg_e94 & 0x03FF0000) >> 16) != 0x142) &&
+ (((reg_e9c & 0x03FF0000) >> 16) != 0x42))
result |= 0x01;
else /* if Tx not OK, ignore Rx */
return result;
- u4tmp = 0x80007C00 | (reg_e94&0x3FF0000) | ((reg_e9c&0x3FF0000) >> 16);
+ u4tmp = 0x80007C00 | (reg_e94 & 0x3FF0000) | ((reg_e9c & 0x3FF0000) >> 16);
phy_set_bb_reg(adapt, rTx_IQK, bMaskDWord, u4tmp);
/* 1 RX IQK */
@@ -648,8 +648,8 @@ static u8 phy_path_a_rx_iqk(struct adapter *adapt, bool configPathB)
phy_set_rf_reg(adapt, RF_PATH_A, 0xdf, bRFRegOffsetMask, 0x180);
if (!(reg_eac & BIT(27)) && /* if Tx is OK, check whether Rx is OK */
- (((reg_ea4 & 0x03FF0000)>>16) != 0x132) &&
- (((reg_eac & 0x03FF0000)>>16) != 0x36))
+ (((reg_ea4 & 0x03FF0000) >> 16) != 0x132) &&
+ (((reg_eac & 0x03FF0000) >> 16) != 0x36))
result |= 0x02;
else
ODM_RT_TRACE(dm_odm, ODM_COMP_CALIBRATION, ODM_DBG_LOUD,
@@ -677,15 +677,15 @@ static u8 phy_path_b_iqk(struct adapter *adapt)
regecc = phy_query_bb_reg(adapt, rRx_Power_After_IQK_B_2, bMaskDWord);
if (!(regeac & BIT(31)) &&
- (((regeb4 & 0x03FF0000)>>16) != 0x142) &&
- (((regebc & 0x03FF0000)>>16) != 0x42))
+ (((regeb4 & 0x03FF0000) >> 16) != 0x142) &&
+ (((regebc & 0x03FF0000) >> 16) != 0x42))
result |= 0x01;
else
return result;
if (!(regeac & BIT(30)) &&
- (((regec4 & 0x03FF0000)>>16) != 0x132) &&
- (((regecc & 0x03FF0000)>>16) != 0x36))
+ (((regec4 & 0x03FF0000) >> 16) != 0x132) &&
+ (((regecc & 0x03FF0000) >> 16) != 0x36))
result |= 0x02;
else
ODM_RT_TRACE(dm_odm, ODM_COMP_CALIBRATION,
@@ -711,7 +711,7 @@ static void patha_fill_iqk(struct adapter *adapt, bool iqkok, s32 result[][8],
tx0_a = (x * oldval_0) >> 8;
phy_set_bb_reg(adapt, rOFDM0_XATxIQImbalance, 0x3FF, tx0_a);
phy_set_bb_reg(adapt, rOFDM0_ECCAThreshold, BIT(31),
- ((x * oldval_0>>7) & 0x1));
+ ((x * oldval_0 >> 7) & 0x1));
y = result[final_candidate][1];
if ((y & 0x00000200) != 0)
@@ -719,11 +719,11 @@ static void patha_fill_iqk(struct adapter *adapt, bool iqkok, s32 result[][8],
tx0_c = (y * oldval_0) >> 8;
phy_set_bb_reg(adapt, rOFDM0_XCTxAFE, 0xF0000000,
- ((tx0_c&0x3C0)>>6));
+ ((tx0_c & 0x3C0) >> 6));
phy_set_bb_reg(adapt, rOFDM0_XATxIQImbalance, 0x003F0000,
- (tx0_c&0x3F));
+ (tx0_c & 0x3F));
phy_set_bb_reg(adapt, rOFDM0_ECCAThreshold, BIT(29),
- ((y * oldval_0>>7) & 0x1));
+ ((y * oldval_0 >> 7) & 0x1));
if (txonly)
return;
@@ -757,7 +757,7 @@ static void pathb_fill_iqk(struct adapter *adapt, bool iqkok, s32 result[][8],
phy_set_bb_reg(adapt, rOFDM0_XBTxIQImbalance, 0x3FF, tx1_a);
phy_set_bb_reg(adapt, rOFDM0_ECCAThreshold, BIT(27),
- ((x * oldval_1>>7) & 0x1));
+ ((x * oldval_1 >> 7) & 0x1));
y = result[final_candidate][5];
if ((y & 0x00000200) != 0)
@@ -766,11 +766,11 @@ static void pathb_fill_iqk(struct adapter *adapt, bool iqkok, s32 result[][8],
tx1_c = (y * oldval_1) >> 8;
phy_set_bb_reg(adapt, rOFDM0_XDTxAFE, 0xF0000000,
- ((tx1_c&0x3C0)>>6));
+ ((tx1_c & 0x3C0) >> 6));
phy_set_bb_reg(adapt, rOFDM0_XBTxIQImbalance, 0x003F0000,
- (tx1_c&0x3F));
+ (tx1_c & 0x3F));
phy_set_bb_reg(adapt, rOFDM0_ECCAThreshold, BIT(25),
- ((y * oldval_1>>7) & 0x1));
+ ((y * oldval_1 >> 7) & 0x1));
if (txonly)
return;
@@ -851,9 +851,9 @@ static void mac_setting_calibration(struct adapter *adapt, u32 *mac_reg, u32 *ba
usb_write8(adapt, mac_reg[i], 0x3F);
for (i = 1; i < (IQK_MAC_REG_NUM - 1); i++)
- usb_write8(adapt, mac_reg[i], (u8)(backup[i]&(~BIT(3))));
+ usb_write8(adapt, mac_reg[i], (u8)(backup[i] & (~BIT(3))));
- usb_write8(adapt, mac_reg[i], (u8)(backup[i]&(~BIT(5))));
+ usb_write8(adapt, mac_reg[i], (u8)(backup[i] & (~BIT(5))));
}
static void path_a_standby(struct adapter *adapt)
@@ -902,22 +902,22 @@ static bool simularity_compare(struct adapter *adapt, s32 resulta[][8],
if (diff > MAX_TOLERANCE) {
if ((i == 2 || i == 6) && !sim_bitmap) {
- if (resulta[c1][i] + resulta[c1][i+1] == 0)
- final_candidate[(i/4)] = c2;
- else if (resulta[c2][i] + resulta[c2][i+1] == 0)
- final_candidate[(i/4)] = c1;
+ if (resulta[c1][i] + resulta[c1][i + 1] == 0)
+ final_candidate[(i / 4)] = c2;
+ else if (resulta[c2][i] + resulta[c2][i + 1] == 0)
+ final_candidate[(i / 4)] = c1;
else
- sim_bitmap = sim_bitmap | (1<<i);
+ sim_bitmap = sim_bitmap | (1 << i);
} else {
- sim_bitmap = sim_bitmap | (1<<i);
+ sim_bitmap = sim_bitmap | (1 << i);
}
}
}
if (sim_bitmap == 0) {
- for (i = 0; i < (bound/4); i++) {
+ for (i = 0; i < (bound / 4); i++) {
if (final_candidate[i] != 0xFF) {
- for (j = i*4; j < (i+1)*4-2; j++)
+ for (j = i * 4; j < (i + 1) * 4 - 2; j++)
resulta[3][j] = resulta[final_candidate[i]][j];
result = false;
}
@@ -1038,9 +1038,9 @@ static void phy_iq_calibrate(struct adapter *adapt, s32 result[][8],
path_a_ok = phy_path_a_iqk(adapt, is2t);
if (path_a_ok == 0x01) {
result[t][0] = (phy_query_bb_reg(adapt, rTx_Power_Before_IQK_A,
- bMaskDWord)&0x3FF0000)>>16;
+ bMaskDWord) & 0x3FF0000) >> 16;
result[t][1] = (phy_query_bb_reg(adapt, rTx_Power_After_IQK_A,
- bMaskDWord)&0x3FF0000)>>16;
+ bMaskDWord) & 0x3FF0000) >> 16;
break;
}
}
@@ -1049,9 +1049,9 @@ static void phy_iq_calibrate(struct adapter *adapt, s32 result[][8],
path_a_ok = phy_path_a_rx_iqk(adapt, is2t);
if (path_a_ok == 0x03) {
result[t][2] = (phy_query_bb_reg(adapt, rRx_Power_Before_IQK_A_2,
- bMaskDWord)&0x3FF0000)>>16;
+ bMaskDWord) & 0x3FF0000) >> 16;
result[t][3] = (phy_query_bb_reg(adapt, rRx_Power_After_IQK_A_2,
- bMaskDWord)&0x3FF0000)>>16;
+ bMaskDWord) & 0x3FF0000) >> 16;
break;
}
ODM_RT_TRACE(dm_odm, ODM_COMP_CALIBRATION, ODM_DBG_LOUD,
@@ -1073,19 +1073,19 @@ static void phy_iq_calibrate(struct adapter *adapt, s32 result[][8],
path_b_ok = phy_path_b_iqk(adapt);
if (path_b_ok == 0x03) {
result[t][4] = (phy_query_bb_reg(adapt, rTx_Power_Before_IQK_B,
- bMaskDWord)&0x3FF0000)>>16;
+ bMaskDWord) & 0x3FF0000) >> 16;
result[t][5] = (phy_query_bb_reg(adapt, rTx_Power_After_IQK_B,
- bMaskDWord)&0x3FF0000)>>16;
+ bMaskDWord) & 0x3FF0000) >> 16;
result[t][6] = (phy_query_bb_reg(adapt, rRx_Power_Before_IQK_B_2,
- bMaskDWord)&0x3FF0000)>>16;
+ bMaskDWord) & 0x3FF0000) >> 16;
result[t][7] = (phy_query_bb_reg(adapt, rRx_Power_After_IQK_B_2,
- bMaskDWord)&0x3FF0000)>>16;
+ bMaskDWord) & 0x3FF0000) >> 16;
break;
} else if (i == (retry_count - 1) && path_b_ok == 0x01) { /* Tx IQK OK */
result[t][4] = (phy_query_bb_reg(adapt, rTx_Power_Before_IQK_B,
- bMaskDWord)&0x3FF0000)>>16;
+ bMaskDWord) & 0x3FF0000) >> 16;
result[t][5] = (phy_query_bb_reg(adapt, rTx_Power_After_IQK_B,
- bMaskDWord)&0x3FF0000)>>16;
+ bMaskDWord) & 0x3FF0000) >> 16;
}
}
@@ -1138,12 +1138,12 @@ static void phy_lc_calibrate(struct adapter *adapt, bool is2t)
/* Check continuous TX and Packet TX */
tmpreg = usb_read8(adapt, 0xd03);
- if ((tmpreg&0x70) != 0)
- usb_write8(adapt, 0xd03, tmpreg&0x8F);
+ if ((tmpreg & 0x70) != 0)
+ usb_write8(adapt, 0xd03, tmpreg & 0x8F);
else
usb_write8(adapt, REG_TXPAUSE, 0xFF);
- if ((tmpreg&0x70) != 0) {
+ if ((tmpreg & 0x70) != 0) {
/* 1. Read original RF mode */
/* Path-A */
rf_a_mode = rtw_hal_read_rfreg(adapt, RF_PATH_A, RF_AC,
@@ -1157,12 +1157,12 @@ static void phy_lc_calibrate(struct adapter *adapt, bool is2t)
/* 2. Set RF mode = standby mode */
/* Path-A */
phy_set_rf_reg(adapt, RF_PATH_A, RF_AC, bMask12Bits,
- (rf_a_mode&0x8FFFF)|0x10000);
+ (rf_a_mode & 0x8FFFF) | 0x10000);
/* Path-B */
if (is2t)
phy_set_rf_reg(adapt, RF_PATH_B, RF_AC, bMask12Bits,
- (rf_b_mode&0x8FFFF)|0x10000);
+ (rf_b_mode & 0x8FFFF) | 0x10000);
}
/* 3. Read RF reg18 */
@@ -1170,12 +1170,12 @@ static void phy_lc_calibrate(struct adapter *adapt, bool is2t)
/* 4. Set LC calibration begin bit15 */
phy_set_rf_reg(adapt, RF_PATH_A, RF_CHNLBW, bMask12Bits,
- lc_cal|0x08000);
+ lc_cal | 0x08000);
msleep(100);
/* Restore original situation */
- if ((tmpreg&0x70) != 0) {
+ if ((tmpreg & 0x70) != 0) {
/* Deal with continuous TX case */
/* Path-A */
usb_write8(adapt, 0xd03, tmpreg);
--
2.17.1
Add space around operators for improving the code
readability.
Reported by checkpatch.pl
git diff -w shows no difference.
diff of the .o files before and after the changes shows no difference.
Signed-off-by: Shreeya Patel <[email protected]>
---
shreeya@Shreeya-Patel:~git/kernels/staging$ git diff -w drivers/staging/rtl8188eu/hal/pwrseqcmd.c
shreeya@Shreeya-Patel:~git/kernels/staging$
shreeya@Shreeya-Patel:~git/kernels/staging/drivers/staging/rtl8188eu/hal$ diff pwrseqcmd_old.o pwrseqcmd.o
shreeya@Shreeya-Patel:~git/kernels/staging/drivers/staging/rtl8188eu/hal$
drivers/staging/rtl8188eu/hal/pwrseqcmd.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/staging/rtl8188eu/hal/pwrseqcmd.c b/drivers/staging/rtl8188eu/hal/pwrseqcmd.c
index 249cbc375074..77edd7ad19a1 100644
--- a/drivers/staging/rtl8188eu/hal/pwrseqcmd.c
+++ b/drivers/staging/rtl8188eu/hal/pwrseqcmd.c
@@ -85,7 +85,7 @@ u8 rtl88eu_pwrseqcmdparsing(struct adapter *padapter, u8 cut_vers,
if (GET_PWR_CFG_VALUE(pwrcfgcmd) == PWRSEQ_DELAY_US)
udelay(GET_PWR_CFG_OFFSET(pwrcfgcmd));
else
- udelay(GET_PWR_CFG_OFFSET(pwrcfgcmd)*1000);
+ udelay(GET_PWR_CFG_OFFSET(pwrcfgcmd) * 1000);
break;
case PWR_CMD_END:
/* When this command is parsed, end the process */
--
2.17.1
Add space around operators for improving the code
readability.
Reported by checkpatch.pl
git diff -w shows no difference.
diff of the .o files before and after the changes shows no difference.
Signed-off-by: Shreeya Patel <[email protected]>
---
shreeya@Shreeya-Patel:~git/kernels/staging$ git diff -w drivers/staging/rtl8188eu/hal/rf_cfg.c
shreeya@Shreeya-Patel:~git/kernels/staging$
shreeya@Shreeya-Patel:~git/kernels/staging/drivers/staging/rtl8188eu/hal$ diff rf_cfg_old.o rf_cfg.o
shreeya@Shreeya-Patel:~git/kernels/staging/drivers/staging/rtl8188eu/hal$
drivers/staging/rtl8188eu/hal/rf_cfg.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/staging/rtl8188eu/hal/rf_cfg.c b/drivers/staging/rtl8188eu/hal/rf_cfg.c
index 004e19301eae..0b20e62f9a68 100644
--- a/drivers/staging/rtl8188eu/hal/rf_cfg.c
+++ b/drivers/staging/rtl8188eu/hal/rf_cfg.c
@@ -143,7 +143,7 @@ static u32 Array_RadioA_1T_8188E[] = {
#define READ_NEXT_PAIR(v1, v2, i) \
do { \
i += 2; v1 = array[i]; \
- v2 = array[i+1]; \
+ v2 = array[i + 1]; \
} while (0)
#define RFREG_OFFSET_MASK 0xfffff
@@ -190,7 +190,7 @@ static bool rtl88e_phy_config_rf_with_headerfile(struct adapter *adapt)
for (i = 0; i < array_len; i += 2) {
u32 v1 = array[i];
- u32 v2 = array[i+1];
+ u32 v2 = array[i + 1];
if (v1 < 0xCDCDCDCD) {
rtl8188e_config_rf_reg(adapt, v1, v2);
--
2.17.1
Add space around operators for improving the code
readability.
Reported by checkpatch.pl
git diff -w shows no difference.
diff of the .o files before and after the changes shows no difference.
Signed-off-by: Shreeya Patel <[email protected]>
---
shreeya@Shreeya-Patel:~git/kernels/staging$ git diff -w drivers/staging/rtl8188eu/hal/rf.c
shreeya@Shreeya-Patel:~git/kernels/staging$
shreeya@Shreeya-Patel:~git/kernels/staging/drivers/staging/rtl8188eu/hal$ diff rf_old.o rf.o
shreeya@Shreeya-Patel:~git/kernels/staging/drivers/staging/rtl8188eu/hal$
drivers/staging/rtl8188eu/hal/rf.c | 60 +++++++++++++++---------------
1 file changed, 30 insertions(+), 30 deletions(-)
diff --git a/drivers/staging/rtl8188eu/hal/rf.c b/drivers/staging/rtl8188eu/hal/rf.c
index 6fe4daea8fd5..00a9f692bb06 100644
--- a/drivers/staging/rtl8188eu/hal/rf.c
+++ b/drivers/staging/rtl8188eu/hal/rf.c
@@ -49,9 +49,9 @@ void rtl88eu_phy_rf6052_set_cck_txpower(struct adapter *adapt, u8 *powerlevel)
tx_agc[RF_PATH_B] = 0x3f3f3f3f;
for (idx1 = RF_PATH_A; idx1 <= RF_PATH_B; idx1++) {
tx_agc[idx1] = powerlevel[idx1] |
- (powerlevel[idx1]<<8) |
- (powerlevel[idx1]<<16) |
- (powerlevel[idx1]<<24);
+ (powerlevel[idx1] << 8) |
+ (powerlevel[idx1] << 16) |
+ (powerlevel[idx1] << 24);
}
} else {
if (pdmpriv->DynamicTxHighPowerLvl == TxHighPwrLevel_Level1) {
@@ -63,17 +63,17 @@ void rtl88eu_phy_rf6052_set_cck_txpower(struct adapter *adapt, u8 *powerlevel)
} else {
for (idx1 = RF_PATH_A; idx1 <= RF_PATH_B; idx1++) {
tx_agc[idx1] = powerlevel[idx1] |
- (powerlevel[idx1]<<8) |
- (powerlevel[idx1]<<16) |
- (powerlevel[idx1]<<24);
+ (powerlevel[idx1] << 8) |
+ (powerlevel[idx1] << 16) |
+ (powerlevel[idx1] << 24);
}
if (hal_data->EEPROMRegulatory == 0) {
tmpval = hal_data->MCSTxPowerLevelOriginalOffset[0][6] +
- (hal_data->MCSTxPowerLevelOriginalOffset[0][7]<<8);
+ (hal_data->MCSTxPowerLevelOriginalOffset[0][7] << 8);
tx_agc[RF_PATH_A] += tmpval;
tmpval = hal_data->MCSTxPowerLevelOriginalOffset[0][14] +
- (hal_data->MCSTxPowerLevelOriginalOffset[0][15]<<24);
+ (hal_data->MCSTxPowerLevelOriginalOffset[0][15] << 24);
tx_agc[RF_PATH_B] += tmpval;
}
}
@@ -100,15 +100,15 @@ void rtl88eu_phy_rf6052_set_cck_txpower(struct adapter *adapt, u8 *powerlevel)
}
/* rf-A cck tx power */
- tmpval = tx_agc[RF_PATH_A]&0xff;
+ tmpval = tx_agc[RF_PATH_A] & 0xff;
phy_set_bb_reg(adapt, rTxAGC_A_CCK1_Mcs32, bMaskByte1, tmpval);
- tmpval = tx_agc[RF_PATH_A]>>8;
+ tmpval = tx_agc[RF_PATH_A] >> 8;
phy_set_bb_reg(adapt, rTxAGC_B_CCK11_A_CCK2_11, 0xffffff00, tmpval);
/* rf-B cck tx power */
- tmpval = tx_agc[RF_PATH_B]>>24;
+ tmpval = tx_agc[RF_PATH_B] >> 24;
phy_set_bb_reg(adapt, rTxAGC_B_CCK11_A_CCK2_11, bMaskByte0, tmpval);
- tmpval = tx_agc[RF_PATH_B]&0x00ffffff;
+ tmpval = tx_agc[RF_PATH_B] & 0x00ffffff;
phy_set_bb_reg(adapt, rTxAGC_B_CCK1_55_Mcs32, 0xffffff00, tmpval);
}
@@ -124,9 +124,9 @@ static void getpowerbase88e(struct adapter *adapt, u8 *pwr_level_ofdm,
for (i = 0; i < 2; i++) {
powerbase0 = pwr_level_ofdm[i];
- powerbase0 = (powerbase0<<24) | (powerbase0<<16) |
- (powerbase0<<8) | powerbase0;
- *(ofdmbase+i) = powerbase0;
+ powerbase0 = (powerbase0 << 24) | (powerbase0 << 16) |
+ (powerbase0 << 8) | powerbase0;
+ *(ofdmbase + i) = powerbase0;
}
/* Check HT20 to HT40 diff */
if (adapt->HalData->CurrentChannelBW == HT_CHANNEL_WIDTH_20)
@@ -134,8 +134,8 @@ static void getpowerbase88e(struct adapter *adapt, u8 *pwr_level_ofdm,
else
powerlevel[0] = pwr_level_bw40[0];
powerbase1 = powerlevel[0];
- powerbase1 = (powerbase1<<24) | (powerbase1<<16) |
- (powerbase1<<8) | powerbase1;
+ powerbase1 = (powerbase1 << 24) | (powerbase1 << 16) |
+ (powerbase1 << 8) | powerbase1;
*mcs_base = powerbase1;
}
static void get_rx_power_val_by_reg(struct adapter *adapt, u8 channel,
@@ -157,7 +157,7 @@ static void get_rx_power_val_by_reg(struct adapter *adapt, u8 channel,
switch (regulatory) {
case 0:
chnlGroup = 0;
- write_val = hal_data->MCSTxPowerLevelOriginalOffset[chnlGroup][index+(rf ? 8 : 0)] +
+ write_val = hal_data->MCSTxPowerLevelOriginalOffset[chnlGroup][index + (rf ? 8 : 0)] +
((index < 2) ? powerbase0[rf] : powerbase1[rf]);
break;
case 1: /* Realtek regulatory */
@@ -167,7 +167,7 @@ static void get_rx_power_val_by_reg(struct adapter *adapt, u8 channel,
if (hal_data->pwrGroupCnt >= hal_data->PGMaxGroup)
Hal_GetChnlGroup88E(channel, &chnlGroup);
- write_val = hal_data->MCSTxPowerLevelOriginalOffset[chnlGroup][index+(rf ? 8 : 0)] +
+ write_val = hal_data->MCSTxPowerLevelOriginalOffset[chnlGroup][index + (rf ? 8 : 0)] +
((index < 2) ? powerbase0[rf] : powerbase1[rf]);
break;
case 2: /* Better regulatory */
@@ -179,14 +179,14 @@ static void get_rx_power_val_by_reg(struct adapter *adapt, u8 channel,
chnlGroup = 0;
if (index < 2)
- pwr_diff = hal_data->TxPwrLegacyHtDiff[rf][channel-1];
+ pwr_diff = hal_data->TxPwrLegacyHtDiff[rf][channel - 1];
else if (hal_data->CurrentChannelBW == HT_CHANNEL_WIDTH_20)
- pwr_diff = hal_data->TxPwrHt20Diff[rf][channel-1];
+ pwr_diff = hal_data->TxPwrHt20Diff[rf][channel - 1];
if (hal_data->CurrentChannelBW == HT_CHANNEL_WIDTH_40)
- customer_pwr_limit = hal_data->PwrGroupHT40[rf][channel-1];
+ customer_pwr_limit = hal_data->PwrGroupHT40[rf][channel - 1];
else
- customer_pwr_limit = hal_data->PwrGroupHT20[rf][channel-1];
+ customer_pwr_limit = hal_data->PwrGroupHT20[rf][channel - 1];
if (pwr_diff >= customer_pwr_limit)
pwr_diff = 0;
@@ -200,9 +200,9 @@ static void get_rx_power_val_by_reg(struct adapter *adapt, u8 channel,
if (pwr_diff_limit[i] > pwr_diff)
pwr_diff_limit[i] = pwr_diff;
}
- customer_limit = (pwr_diff_limit[3]<<24) |
- (pwr_diff_limit[2]<<16) |
- (pwr_diff_limit[1]<<8) |
+ customer_limit = (pwr_diff_limit[3] << 24) |
+ (pwr_diff_limit[2] << 16) |
+ (pwr_diff_limit[1] << 8) |
(pwr_diff_limit[0]);
write_val = customer_limit + ((index < 2) ? powerbase0[rf] : powerbase1[rf]);
break;
@@ -221,7 +221,7 @@ static void get_rx_power_val_by_reg(struct adapter *adapt, u8 channel,
else if (pdmpriv->DynamicTxHighPowerLvl == TxHighPwrLevel_Level2)
write_val = 0x00000000;
- *(out_val+rf) = write_val;
+ *(out_val + rf) = write_val;
}
}
@@ -240,12 +240,12 @@ static void write_ofdm_pwr_reg(struct adapter *adapt, u8 index, u32 *pvalue)
for (rf = 0; rf < 2; rf++) {
write_val = pvalue[rf];
for (i = 0; i < 4; i++) {
- pwr_val[i] = (u8)((write_val & (0x7f<<(i*8)))>>(i*8));
+ pwr_val[i] = (u8)((write_val & (0x7f << (i * 8))) >> (i * 8));
if (pwr_val[i] > RF6052_MAX_TX_PWR)
pwr_val[i] = RF6052_MAX_TX_PWR;
}
- write_val = (pwr_val[3]<<24) | (pwr_val[2]<<16) |
- (pwr_val[1]<<8) | pwr_val[0];
+ write_val = (pwr_val[3] << 24) | (pwr_val[2] << 16) |
+ (pwr_val[1] << 8) | pwr_val[0];
if (rf == 0)
regoffset = regoffset_a[index];
--
2.17.1
Add space around operators for improving the code
readability.
Reported by checkpatch.pl
git diff -w shows no difference.
diff of the .o files before and after the changes shows no difference.
Signed-off-by: Shreeya Patel <[email protected]>
---
shreeya@Shreeya-Patel:~git/kernels/staging$ git diff -w drivers/staging/rtl8188eu/hal/rtl8188e_cmd.c
shreeya@Shreeya-Patel:~git/kernels/staging$
shreeya@Shreeya-Patel:~git/kernels/staging/drivers/staging/rtl8188eu/hal$ diff rtl8188e_cmd_old.o rtl8188e_cmd.o
shreeya@Shreeya-Patel:~git/kernels/staging/drivers/staging/rtl8188eu/hal$
drivers/staging/rtl8188eu/hal/rtl8188e_cmd.c | 42 ++++++++++----------
1 file changed, 21 insertions(+), 21 deletions(-)
diff --git a/drivers/staging/rtl8188eu/hal/rtl8188e_cmd.c b/drivers/staging/rtl8188eu/hal/rtl8188e_cmd.c
index 7646167a0b36..371e746915dd 100644
--- a/drivers/staging/rtl8188eu/hal/rtl8188e_cmd.c
+++ b/drivers/staging/rtl8188eu/hal/rtl8188e_cmd.c
@@ -113,24 +113,24 @@ void rtw_hal_add_ra_tid(struct adapter *pAdapter, u32 bitmap, u8 arg, u8 rssi_le
struct odm_dm_struct *odmpriv = &pAdapter->HalData->odmpriv;
u8 macid, init_rate, raid, shortGIrate = false;
- macid = arg&0x1f;
+ macid = arg & 0x1f;
- raid = (bitmap>>28) & 0x0f;
+ raid = (bitmap >> 28) & 0x0f;
bitmap &= 0x0fffffff;
if (rssi_level != DM_RATR_STA_INIT)
bitmap = ODM_Get_Rate_Bitmap(odmpriv, macid, bitmap, rssi_level);
- bitmap |= ((raid<<28)&0xf0000000);
+ bitmap |= ((raid << 28) & 0xf0000000);
- init_rate = get_highest_rate_idx(bitmap&0x0fffffff)&0x3f;
+ init_rate = get_highest_rate_idx(bitmap & 0x0fffffff) & 0x3f;
shortGIrate = (arg & BIT(5)) ? true : false;
if (shortGIrate)
init_rate |= BIT(6);
- raid = (bitmap>>28) & 0x0f;
+ raid = (bitmap >> 28) & 0x0f;
bitmap &= 0x0fffffff;
@@ -172,7 +172,7 @@ void rtl8188e_set_FwPwrMode_cmd(struct adapter *adapt, u8 Mode)
break;
}
- H2CSetPwrMode.SmartPS_RLBM = (((pwrpriv->smart_ps<<4)&0xf0) | (RLBM & 0x0f));
+ H2CSetPwrMode.SmartPS_RLBM = (((pwrpriv->smart_ps << 4) & 0xf0) | (RLBM & 0x0f));
H2CSetPwrMode.AwakeInterval = 1;
@@ -239,9 +239,9 @@ static void ConstructBeacon(struct adapter *adapt, u8 *pframe, u32 *pLength)
pframe += 2;
pktlen += 2;
- if ((pmlmeinfo->state&0x03) == WIFI_FW_AP_STATE) {
+ if ((pmlmeinfo->state & 0x03) == WIFI_FW_AP_STATE) {
pktlen += cur_network->ie_length - sizeof(struct ndis_802_11_fixed_ie);
- memcpy(pframe, cur_network->ies+sizeof(struct ndis_802_11_fixed_ie), pktlen);
+ memcpy(pframe, cur_network->ies + sizeof(struct ndis_802_11_fixed_ie), pktlen);
goto _ConstructBeacon;
}
@@ -258,7 +258,7 @@ static void ConstructBeacon(struct adapter *adapt, u8 *pframe, u32 *pLength)
/* DS parameter set */
pframe = rtw_set_ie(pframe, _DSSET_IE_, 1, (unsigned char *)&(cur_network->Configuration.DSConfig), &pktlen);
- if ((pmlmeinfo->state&0x03) == WIFI_FW_ADHOC_STATE) {
+ if ((pmlmeinfo->state & 0x03) == WIFI_FW_ADHOC_STATE) {
u32 ATIMWindow;
/* IBSS Parameter Set... */
ATIMWindow = 0;
@@ -473,7 +473,7 @@ static void SetFwRsvdPagePkt(struct adapter *adapt, bool bDLFinished)
/* 3 (2) ps-poll *1 page */
RsvdPageLoc.LocPsPoll = PageNum;
ConstructPSPoll(adapt, &ReservedPagePacket[BufIndex], &PSPollLength);
- rtl8188e_fill_fake_txdesc(adapt, &ReservedPagePacket[BufIndex-TxDescLen], PSPollLength, true, false);
+ rtl8188e_fill_fake_txdesc(adapt, &ReservedPagePacket[BufIndex - TxDescLen], PSPollLength, true, false);
PageNeed = (u8)PageNum_128(TxDescLen + PSPollLength);
PageNum += PageNeed;
@@ -483,7 +483,7 @@ static void SetFwRsvdPagePkt(struct adapter *adapt, bool bDLFinished)
/* 3 (3) null data * 1 page */
RsvdPageLoc.LocNullData = PageNum;
ConstructNullFunctionData(adapt, &ReservedPagePacket[BufIndex], &NullDataLength, pnetwork->MacAddress, false, 0, 0, false);
- rtl8188e_fill_fake_txdesc(adapt, &ReservedPagePacket[BufIndex-TxDescLen], NullDataLength, false, false);
+ rtl8188e_fill_fake_txdesc(adapt, &ReservedPagePacket[BufIndex - TxDescLen], NullDataLength, false, false);
PageNeed = (u8)PageNum_128(TxDescLen + NullDataLength);
PageNum += PageNeed;
@@ -493,7 +493,7 @@ static void SetFwRsvdPagePkt(struct adapter *adapt, bool bDLFinished)
/* 3 (4) probe response * 1page */
RsvdPageLoc.LocProbeRsp = PageNum;
ConstructProbeRsp(adapt, &ReservedPagePacket[BufIndex], &ProbeRspLength, pnetwork->MacAddress, false);
- rtl8188e_fill_fake_txdesc(adapt, &ReservedPagePacket[BufIndex-TxDescLen], ProbeRspLength, false, false);
+ rtl8188e_fill_fake_txdesc(adapt, &ReservedPagePacket[BufIndex - TxDescLen], ProbeRspLength, false, false);
PageNeed = (u8)PageNum_128(TxDescLen + ProbeRspLength);
PageNum += PageNeed;
@@ -504,7 +504,7 @@ static void SetFwRsvdPagePkt(struct adapter *adapt, bool bDLFinished)
RsvdPageLoc.LocQosNull = PageNum;
ConstructNullFunctionData(adapt, &ReservedPagePacket[BufIndex],
&QosNullLength, pnetwork->MacAddress, true, 0, 0, false);
- rtl8188e_fill_fake_txdesc(adapt, &ReservedPagePacket[BufIndex-TxDescLen], QosNullLength, false, false);
+ rtl8188e_fill_fake_txdesc(adapt, &ReservedPagePacket[BufIndex - TxDescLen], QosNullLength, false, false);
PageNeed = (u8)PageNum_128(TxDescLen + QosNullLength);
PageNum += PageNeed;
@@ -546,17 +546,17 @@ void rtl8188e_set_FwJoinBssReport_cmd(struct adapter *adapt, u8 mstatus)
if (mstatus == 1) {
/* We should set AID, correct TSF, HW seq enable before set JoinBssReport to Fw in 88/92C. */
/* Suggested by filen. Added by tynli. */
- usb_write16(adapt, REG_BCN_PSR_RPT, (0xC000|pmlmeinfo->aid));
+ usb_write16(adapt, REG_BCN_PSR_RPT, (0xC000 | pmlmeinfo->aid));
/* Do not set TSF again here or vWiFi beacon DMA INT will not work. */
/* Set REG_CR bit 8. DMA beacon by SW. */
haldata->RegCR_1 |= BIT(0);
- usb_write8(adapt, REG_CR+1, haldata->RegCR_1);
+ usb_write8(adapt, REG_CR + 1, haldata->RegCR_1);
/* Disable Hw protection for a time which revserd for Hw sending beacon. */
/* Fix download reserved page packet fail that access collision with the protection time. */
/* 2010.05.11. Added by tynli. */
- usb_write8(adapt, REG_BCN_CTRL, usb_read8(adapt, REG_BCN_CTRL)&(~BIT(3)));
+ usb_write8(adapt, REG_BCN_CTRL, usb_read8(adapt, REG_BCN_CTRL) & (~BIT(3)));
usb_write8(adapt, REG_BCN_CTRL, usb_read8(adapt, REG_BCN_CTRL) | BIT(4));
if (haldata->RegFwHwTxQCtrl & BIT(6)) {
@@ -565,7 +565,7 @@ void rtl8188e_set_FwJoinBssReport_cmd(struct adapter *adapt, u8 mstatus)
}
/* Set FWHW_TXQ_CTRL 0x422[6]=0 to tell Hw the packet is not a real beacon frame. */
- usb_write8(adapt, REG_FWHW_TXQ_CTRL+2, (haldata->RegFwHwTxQCtrl&(~BIT(6))));
+ usb_write8(adapt, REG_FWHW_TXQ_CTRL + 2, (haldata->RegFwHwTxQCtrl & (~BIT(6))));
haldata->RegFwHwTxQCtrl &= (~BIT(6));
/* Clear beacon valid check bit. */
@@ -582,7 +582,7 @@ void rtl8188e_set_FwJoinBssReport_cmd(struct adapter *adapt, u8 mstatus)
/* check rsvd page download OK. */
rtw_hal_get_hwreg(adapt, HW_VAR_BCN_VALID, (u8 *)(&bcn_valid));
poll++;
- } while (!bcn_valid && (poll%10) != 0 && !adapt->bSurpriseRemoved && !adapt->bDriverStopped);
+ } while (!bcn_valid && (poll % 10) != 0 && !adapt->bSurpriseRemoved && !adapt->bDriverStopped);
} while (!bcn_valid && DLBcnCount <= 100 && !adapt->bSurpriseRemoved && !adapt->bDriverStopped);
if (adapt->bSurpriseRemoved || adapt->bDriverStopped)
@@ -600,7 +600,7 @@ void rtl8188e_set_FwJoinBssReport_cmd(struct adapter *adapt, u8 mstatus)
/* Enable Bcn */
usb_write8(adapt, REG_BCN_CTRL, usb_read8(adapt, REG_BCN_CTRL) | BIT(3));
- usb_write8(adapt, REG_BCN_CTRL, usb_read8(adapt, REG_BCN_CTRL)&(~BIT(4)));
+ usb_write8(adapt, REG_BCN_CTRL, usb_read8(adapt, REG_BCN_CTRL) & (~BIT(4)));
/* To make sure that if there exists an adapter which would like to send beacon. */
/* If exists, the origianl value of 0x422[6] will be 1, we should check this to */
@@ -608,7 +608,7 @@ void rtl8188e_set_FwJoinBssReport_cmd(struct adapter *adapt, u8 mstatus)
/* the beacon cannot be sent by HW. */
/* 2010.06.23. Added by tynli. */
if (bSendBeacon) {
- usb_write8(adapt, REG_FWHW_TXQ_CTRL+2, (haldata->RegFwHwTxQCtrl | BIT(6)));
+ usb_write8(adapt, REG_FWHW_TXQ_CTRL + 2, (haldata->RegFwHwTxQCtrl | BIT(6)));
haldata->RegFwHwTxQCtrl |= BIT(6);
}
@@ -621,6 +621,6 @@ void rtl8188e_set_FwJoinBssReport_cmd(struct adapter *adapt, u8 mstatus)
/* Do not enable HW DMA BCN or it will cause Pcie interface hang by timing issue. 2011.11.24. by tynli. */
/* Clear CR[8] or beacon packet will not be send to TxBuf anymore. */
haldata->RegCR_1 &= (~BIT(0));
- usb_write8(adapt, REG_CR+1, haldata->RegCR_1);
+ usb_write8(adapt, REG_CR + 1, haldata->RegCR_1);
}
}
--
2.17.1
Add space around operators for improving the code
readability.
Reported by checkpatch.pl
git diff -w shows no difference.
diff of the .o files before and after the changes shows no difference.
Signed-off-by: Shreeya Patel <[email protected]>
---
shreeya@Shreeya-Patel:~git/kernels/staging$ git diff -w drivers/staging/rtl8188eu/hal/rtl8188e_hal_init.c
shreeya@Shreeya-Patel:~git/kernels/staging$
shreeya@Shreeya-Patel:~git/kernels/staging/drivers/staging/rtl8188eu/hal$ diff rtl8188e_hal_init_old.o rtl8188e_hal_init.o
shreeya@Shreeya-Patel:~git/kernels/staging/drivers/staging/rtl8188eu/hal$
.../staging/rtl8188eu/hal/rtl8188e_hal_init.c | 44 +++++++++----------
1 file changed, 22 insertions(+), 22 deletions(-)
diff --git a/drivers/staging/rtl8188eu/hal/rtl8188e_hal_init.c b/drivers/staging/rtl8188eu/hal/rtl8188e_hal_init.c
index 57ae0e83dd3e..740004d71a15 100644
--- a/drivers/staging/rtl8188eu/hal/rtl8188e_hal_init.c
+++ b/drivers/staging/rtl8188eu/hal/rtl8188e_hal_init.c
@@ -22,7 +22,7 @@ void iol_mode_enable(struct adapter *padapter, u8 enable)
if (enable) {
/* Enable initial offload */
reg_0xf0 = usb_read8(padapter, REG_SYS_CFG);
- usb_write8(padapter, REG_SYS_CFG, reg_0xf0|SW_OFFLOAD_EN);
+ usb_write8(padapter, REG_SYS_CFG, reg_0xf0 | SW_OFFLOAD_EN);
if (!padapter->bFWReady) {
DBG_88E("bFWReady == false call reset 8051...\n");
@@ -42,9 +42,9 @@ s32 iol_execute(struct adapter *padapter, u8 control)
u8 reg_0x88 = 0;
unsigned long start = 0;
- control = control&0x0f;
+ control = control & 0x0f;
reg_0x88 = usb_read8(padapter, REG_HMEBOX_E0);
- usb_write8(padapter, REG_HMEBOX_E0, reg_0x88|control);
+ usb_write8(padapter, REG_HMEBOX_E0, reg_0x88 | control);
start = jiffies;
while ((reg_0x88 = usb_read8(padapter, REG_HMEBOX_E0)) & control &&
@@ -54,7 +54,7 @@ s32 iol_execute(struct adapter *padapter, u8 control)
reg_0x88 = usb_read8(padapter, REG_HMEBOX_E0);
status = (reg_0x88 & control) ? _FAIL : _SUCCESS;
- if (reg_0x88 & control<<4)
+ if (reg_0x88 & control << 4)
status = _FAIL;
return status;
}
@@ -64,7 +64,7 @@ static s32 iol_InitLLTTable(struct adapter *padapter, u8 txpktbuf_bndy)
s32 rst = _SUCCESS;
iol_mode_enable(padapter, 1);
- usb_write8(padapter, REG_TDECTRL+1, txpktbuf_bndy);
+ usb_write8(padapter, REG_TDECTRL + 1, txpktbuf_bndy);
rst = iol_execute(padapter, CMD_INIT_LLT);
iol_mode_enable(padapter, 0);
return rst;
@@ -92,9 +92,9 @@ void _8051Reset88E(struct adapter *padapter)
{
u8 u1bTmp;
- u1bTmp = usb_read8(padapter, REG_SYS_FUNC_EN+1);
- usb_write8(padapter, REG_SYS_FUNC_EN+1, u1bTmp&(~BIT(2)));
- usb_write8(padapter, REG_SYS_FUNC_EN+1, u1bTmp|(BIT(2)));
+ u1bTmp = usb_read8(padapter, REG_SYS_FUNC_EN + 1);
+ usb_write8(padapter, REG_SYS_FUNC_EN + 1, u1bTmp & (~BIT(2)));
+ usb_write8(padapter, REG_SYS_FUNC_EN + 1, u1bTmp | (BIT(2)));
DBG_88E("=====> _8051Reset88E(): 8051 reset success .\n");
}
@@ -122,7 +122,7 @@ void rtw_hal_read_chip_version(struct adapter *padapter)
value32 = usb_read32(padapter, REG_SYS_CFG);
ChipVersion.ChipType = ((value32 & RTL_ID) ? TEST_CHIP : NORMAL_CHIP);
ChipVersion.VendorType = ((value32 & VENDOR_ID) ? CHIP_VENDOR_UMC : CHIP_VENDOR_TSMC);
- ChipVersion.CUTVersion = (value32 & CHIP_VER_RTL_MASK)>>CHIP_VER_RTL_SHIFT; /* IC version (CUT) */
+ ChipVersion.CUTVersion = (value32 & CHIP_VER_RTL_MASK) >> CHIP_VER_RTL_SHIFT; /* IC version (CUT) */
dump_chip_info(ChipVersion);
@@ -163,10 +163,10 @@ void rtw_hal_notch_filter(struct adapter *adapter, bool enable)
{
if (enable) {
DBG_88E("Enable notch filter\n");
- usb_write8(adapter, rOFDM0_RxDSP+1, usb_read8(adapter, rOFDM0_RxDSP+1) | BIT(1));
+ usb_write8(adapter, rOFDM0_RxDSP + 1, usb_read8(adapter, rOFDM0_RxDSP + 1) | BIT(1));
} else {
DBG_88E("Disable notch filter\n");
- usb_write8(adapter, rOFDM0_RxDSP+1, usb_read8(adapter, rOFDM0_RxDSP+1) & ~BIT(1));
+ usb_write8(adapter, rOFDM0_RxDSP + 1, usb_read8(adapter, rOFDM0_RxDSP + 1) & ~BIT(1));
}
}
@@ -308,7 +308,7 @@ static void Hal_ReadPowerValueFromPROM_8188E(struct txpowerinfo24g *pwrInfo24G,
if (pwrInfo24G->IndexCCK_Base[rfPath][group] == 0xFF)
pwrInfo24G->IndexCCK_Base[rfPath][group] = EEPROM_DEFAULT_24G_INDEX;
}
- for (group = 0; group < MAX_CHNL_GROUP_24G-1; group++) {
+ for (group = 0; group < MAX_CHNL_GROUP_24G - 1; group++) {
pwrInfo24G->IndexBW40_Base[rfPath][group] = PROMContent[eeAddr++];
if (pwrInfo24G->IndexBW40_Base[rfPath][group] == 0xFF)
pwrInfo24G->IndexBW40_Base[rfPath][group] = EEPROM_DEFAULT_24G_INDEX;
@@ -319,7 +319,7 @@ static void Hal_ReadPowerValueFromPROM_8188E(struct txpowerinfo24g *pwrInfo24G,
if (PROMContent[eeAddr] == 0xFF) {
pwrInfo24G->BW20_Diff[rfPath][TxCount] = EEPROM_DEFAULT_24G_HT20_DIFF;
} else {
- pwrInfo24G->BW20_Diff[rfPath][TxCount] = (PROMContent[eeAddr]&0xf0)>>4;
+ pwrInfo24G->BW20_Diff[rfPath][TxCount] = (PROMContent[eeAddr] & 0xf0) >> 4;
if (pwrInfo24G->BW20_Diff[rfPath][TxCount] & BIT(3)) /* 4bit sign number to 8 bit sign number */
pwrInfo24G->BW20_Diff[rfPath][TxCount] |= 0xF0;
}
@@ -327,7 +327,7 @@ static void Hal_ReadPowerValueFromPROM_8188E(struct txpowerinfo24g *pwrInfo24G,
if (PROMContent[eeAddr] == 0xFF) {
pwrInfo24G->OFDM_Diff[rfPath][TxCount] = EEPROM_DEFAULT_24G_OFDM_DIFF;
} else {
- pwrInfo24G->OFDM_Diff[rfPath][TxCount] = (PROMContent[eeAddr]&0x0f);
+ pwrInfo24G->OFDM_Diff[rfPath][TxCount] = (PROMContent[eeAddr] & 0x0f);
if (pwrInfo24G->OFDM_Diff[rfPath][TxCount] & BIT(3)) /* 4bit sign number to 8 bit sign number */
pwrInfo24G->OFDM_Diff[rfPath][TxCount] |= 0xF0;
}
@@ -337,7 +337,7 @@ static void Hal_ReadPowerValueFromPROM_8188E(struct txpowerinfo24g *pwrInfo24G,
if (PROMContent[eeAddr] == 0xFF) {
pwrInfo24G->BW40_Diff[rfPath][TxCount] = EEPROM_DEFAULT_DIFF;
} else {
- pwrInfo24G->BW40_Diff[rfPath][TxCount] = (PROMContent[eeAddr]&0xf0)>>4;
+ pwrInfo24G->BW40_Diff[rfPath][TxCount] = (PROMContent[eeAddr] & 0xf0) >> 4;
if (pwrInfo24G->BW40_Diff[rfPath][TxCount] & BIT(3)) /* 4bit sign number to 8 bit sign number */
pwrInfo24G->BW40_Diff[rfPath][TxCount] |= 0xF0;
}
@@ -345,7 +345,7 @@ static void Hal_ReadPowerValueFromPROM_8188E(struct txpowerinfo24g *pwrInfo24G,
if (PROMContent[eeAddr] == 0xFF) {
pwrInfo24G->BW20_Diff[rfPath][TxCount] = EEPROM_DEFAULT_DIFF;
} else {
- pwrInfo24G->BW20_Diff[rfPath][TxCount] = (PROMContent[eeAddr]&0x0f);
+ pwrInfo24G->BW20_Diff[rfPath][TxCount] = (PROMContent[eeAddr] & 0x0f);
if (pwrInfo24G->BW20_Diff[rfPath][TxCount] & BIT(3)) /* 4bit sign number to 8 bit sign number */
pwrInfo24G->BW20_Diff[rfPath][TxCount] |= 0xF0;
}
@@ -354,7 +354,7 @@ static void Hal_ReadPowerValueFromPROM_8188E(struct txpowerinfo24g *pwrInfo24G,
if (PROMContent[eeAddr] == 0xFF) {
pwrInfo24G->OFDM_Diff[rfPath][TxCount] = EEPROM_DEFAULT_DIFF;
} else {
- pwrInfo24G->OFDM_Diff[rfPath][TxCount] = (PROMContent[eeAddr]&0xf0)>>4;
+ pwrInfo24G->OFDM_Diff[rfPath][TxCount] = (PROMContent[eeAddr] & 0xf0) >> 4;
if (pwrInfo24G->OFDM_Diff[rfPath][TxCount] & BIT(3)) /* 4bit sign number to 8 bit sign number */
pwrInfo24G->OFDM_Diff[rfPath][TxCount] |= 0xF0;
}
@@ -362,7 +362,7 @@ static void Hal_ReadPowerValueFromPROM_8188E(struct txpowerinfo24g *pwrInfo24G,
if (PROMContent[eeAddr] == 0xFF) {
pwrInfo24G->CCK_Diff[rfPath][TxCount] = EEPROM_DEFAULT_DIFF;
} else {
- pwrInfo24G->CCK_Diff[rfPath][TxCount] = (PROMContent[eeAddr]&0x0f);
+ pwrInfo24G->CCK_Diff[rfPath][TxCount] = (PROMContent[eeAddr] & 0x0f);
if (pwrInfo24G->CCK_Diff[rfPath][TxCount] & BIT(3)) /* 4bit sign number to 8 bit sign number */
pwrInfo24G->CCK_Diff[rfPath][TxCount] |= 0xF0;
}
@@ -450,9 +450,9 @@ void Hal_ReadTxPowerInfo88E(struct adapter *padapter, u8 *PROMContent, bool Auto
/* 2010/10/19 MH Add Regulator recognize for CU. */
if (!AutoLoadFail) {
- pHalData->EEPROMRegulatory = (PROMContent[EEPROM_RF_BOARD_OPTION_88E]&0x7); /* bit0~2 */
+ pHalData->EEPROMRegulatory = (PROMContent[EEPROM_RF_BOARD_OPTION_88E] & 0x7); /* bit0~2 */
if (PROMContent[EEPROM_RF_BOARD_OPTION_88E] == 0xFF)
- pHalData->EEPROMRegulatory = (EEPROM_DEFAULT_BOARD_OPTION&0x7); /* bit0~2 */
+ pHalData->EEPROMRegulatory = (EEPROM_DEFAULT_BOARD_OPTION & 0x7); /* bit0~2 */
} else {
pHalData->EEPROMRegulatory = 0;
}
@@ -532,9 +532,9 @@ void Hal_ReadAntennaDiversity88E(struct adapter *pAdapter, u8 *PROMContent, bool
if (!AutoLoadFail) {
/* Antenna Diversity setting. */
if (registry_par->antdiv_cfg == 2) { /* 2:By EFUSE */
- pHalData->AntDivCfg = (PROMContent[EEPROM_RF_BOARD_OPTION_88E]&0x18)>>3;
+ pHalData->AntDivCfg = (PROMContent[EEPROM_RF_BOARD_OPTION_88E] & 0x18) >> 3;
if (PROMContent[EEPROM_RF_BOARD_OPTION_88E] == 0xFF)
- pHalData->AntDivCfg = (EEPROM_DEFAULT_BOARD_OPTION&0x18)>>3;
+ pHalData->AntDivCfg = (EEPROM_DEFAULT_BOARD_OPTION & 0x18) >> 3;
} else {
pHalData->AntDivCfg = registry_par->antdiv_cfg; /* 0:OFF , 1:ON, 2:By EFUSE */
}
--
2.17.1
Add space around operators for improving the code
readability.
Reported by checkpatch.pl
git diff -w shows no difference.
diff of the .o files before and after the changes shows no difference.
Signed-off-by: Shreeya Patel <[email protected]>
---
shreeya@Shreeya-Patel:~git/kernels/staging$ git diff -w drivers/staging/rtl8188eu/hal/rtl8188e_rxdesc.c
shreeya@Shreeya-Patel:~git/kernels/staging$
shreeya@Shreeya-Patel:~git/kernels/staging/drivers/staging/rtl8188eu/hal$ diff rtl8188e_rxdesc_old.o rtl8188e_rxdesc.o
shreeya@Shreeya-Patel:~git/kernels/staging/drivers/staging/rtl8188eu/hal$
drivers/staging/rtl8188eu/hal/rtl8188e_rxdesc.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/staging/rtl8188eu/hal/rtl8188e_rxdesc.c b/drivers/staging/rtl8188eu/hal/rtl8188e_rxdesc.c
index 0a900827c4fc..7d0135fde795 100644
--- a/drivers/staging/rtl8188eu/hal/rtl8188e_rxdesc.c
+++ b/drivers/staging/rtl8188eu/hal/rtl8188e_rxdesc.c
@@ -182,7 +182,7 @@ void update_recvframe_phyinfo_88e(struct recv_frame *precvframe,
rtl8188e_process_phy_info(padapter, precvframe);
}
} else if (pkt_info.bPacketToSelf || pkt_info.bPacketBeacon) {
- if (check_fwstate(&padapter->mlmepriv, WIFI_ADHOC_STATE|WIFI_ADHOC_MASTER_STATE)) {
+ if (check_fwstate(&padapter->mlmepriv, WIFI_ADHOC_STATE | WIFI_ADHOC_MASTER_STATE)) {
if (psta)
precvframe->psta = psta;
}
--
2.17.1
Add space around operators for improving the code
readability.
Reported by checkpatch.pl
git diff -w shows no difference.
diff of the .o files before and after the changes shows no difference.
Signed-off-by: Shreeya Patel <[email protected]>
---
shreeya@Shreeya-Patel:~git/kernels/staging$ git diff -w drivers/staging/rtl8188eu/hal/rtl8188eu_xmit.c
shreeya@Shreeya-Patel:~git/kernels/staging$
shreeya@Shreeya-Patel:~git/kernels/staging/drivers/staging/rtl8188eu/hal$ diff rtl8188eu_xmit_old.o rtl8188eu_xmit.o
shreeya@Shreeya-Patel:~git/kernels/staging/drivers/staging/rtl8188eu/hal$
.../staging/rtl8188eu/hal/rtl8188eu_xmit.c | 32 +++++++++----------
1 file changed, 16 insertions(+), 16 deletions(-)
diff --git a/drivers/staging/rtl8188eu/hal/rtl8188eu_xmit.c b/drivers/staging/rtl8188eu/hal/rtl8188eu_xmit.c
index 2808f2b119bf..7d315bd438d4 100644
--- a/drivers/staging/rtl8188eu/hal/rtl8188eu_xmit.c
+++ b/drivers/staging/rtl8188eu/hal/rtl8188eu_xmit.c
@@ -58,12 +58,12 @@ void rtl8188e_fill_fake_txdesc(struct adapter *adapt, u8 *desc, u32 BufferLen, u
/* offset 0 */
ptxdesc->txdw0 |= cpu_to_le32(OWN | FSG | LSG); /* own, bFirstSeg, bLastSeg; */
- ptxdesc->txdw0 |= cpu_to_le32(((TXDESC_SIZE+OFFSET_SZ)<<OFFSET_SHT)&0x00ff0000); /* 32 bytes for TX Desc */
+ ptxdesc->txdw0 |= cpu_to_le32(((TXDESC_SIZE + OFFSET_SZ) << OFFSET_SHT) & 0x00ff0000); /* 32 bytes for TX Desc */
- ptxdesc->txdw0 |= cpu_to_le32(BufferLen&0x0000ffff); /* Buffer size + command header */
+ ptxdesc->txdw0 |= cpu_to_le32(BufferLen & 0x0000ffff); /* Buffer size + command header */
/* offset 4 */
- ptxdesc->txdw1 |= cpu_to_le32((QSLT_MGNT<<QSEL_SHT)&0x00001f00); /* Fixed queue of Mgnt queue */
+ ptxdesc->txdw1 |= cpu_to_le32((QSLT_MGNT << QSEL_SHT) & 0x00001f00); /* Fixed queue of Mgnt queue */
/* Set NAVUSEHDR to prevent Ps-poll AId filed to be changed to error vlaue by Hw. */
if (ispspoll) {
@@ -91,16 +91,16 @@ static void fill_txdesc_sectype(struct pkt_attrib *pattrib, struct tx_desc *ptxd
/* SEC_TYPE : 0:NO_ENC,1:WEP40/TKIP,2:WAPI,3:AES */
case _WEP40_:
case _WEP104_:
- ptxdesc->txdw1 |= cpu_to_le32((0x01<<SEC_TYPE_SHT)&0x00c00000);
+ ptxdesc->txdw1 |= cpu_to_le32((0x01 << SEC_TYPE_SHT) & 0x00c00000);
ptxdesc->txdw2 |= cpu_to_le32(0x7 << AMPDU_DENSITY_SHT);
break;
case _TKIP_:
case _TKIP_WTMIC_:
- ptxdesc->txdw1 |= cpu_to_le32((0x01<<SEC_TYPE_SHT)&0x00c00000);
+ ptxdesc->txdw1 |= cpu_to_le32((0x01 << SEC_TYPE_SHT) & 0x00c00000);
ptxdesc->txdw2 |= cpu_to_le32(0x7 << AMPDU_DENSITY_SHT);
break;
case _AES_:
- ptxdesc->txdw1 |= cpu_to_le32((0x03<<SEC_TYPE_SHT)&0x00c00000);
+ ptxdesc->txdw1 |= cpu_to_le32((0x03 << SEC_TYPE_SHT) & 0x00c00000);
ptxdesc->txdw2 |= cpu_to_le32(0x7 << AMPDU_DENSITY_SHT);
break;
case _NO_PRIVACY_:
@@ -127,7 +127,7 @@ static void fill_txdesc_vcs(struct pkt_attrib *pattrib, __le32 *pdw)
*pdw |= cpu_to_le32(HW_RTS_EN);
/* Set RTS BW */
if (pattrib->ht_en) {
- *pdw |= (pattrib->bwmode&HT_CHANNEL_WIDTH_40) ? cpu_to_le32(BIT(27)) : 0;
+ *pdw |= (pattrib->bwmode & HT_CHANNEL_WIDTH_40) ? cpu_to_le32(BIT(27)) : 0;
if (pattrib->ch_offset == HAL_PRIME_CHNL_OFFSET_LOWER)
*pdw |= cpu_to_le32((0x01 << 28) & 0x30000000);
@@ -144,7 +144,7 @@ static void fill_txdesc_vcs(struct pkt_attrib *pattrib, __le32 *pdw)
static void fill_txdesc_phy(struct pkt_attrib *pattrib, __le32 *pdw)
{
if (pattrib->ht_en) {
- *pdw |= (pattrib->bwmode&HT_CHANNEL_WIDTH_40) ? cpu_to_le32(BIT(25)) : 0;
+ *pdw |= (pattrib->bwmode & HT_CHANNEL_WIDTH_40) ? cpu_to_le32(BIT(25)) : 0;
if (pattrib->ch_offset == HAL_PRIME_CHNL_OFFSET_LOWER)
*pdw |= cpu_to_le32((0x01 << DATA_SC_SHT) & 0x003f0000);
@@ -171,7 +171,7 @@ static s32 update_txdesc(struct xmit_frame *pxmitframe, u8 *pmem, s32 sz, u8 bag
if (adapt->registrypriv.mp_mode == 0) {
if ((!bagg_pkt) && (urb_zero_packet_chk(adapt, sz) == 0)) {
- ptxdesc = (struct tx_desc *)(pmem+PACKET_OFFSET_SZ);
+ ptxdesc = (struct tx_desc *)(pmem + PACKET_OFFSET_SZ);
pull = 1;
}
}
@@ -263,11 +263,11 @@ static s32 update_txdesc(struct xmit_frame *pxmitframe, u8 *pmem, s32 sz, u8 bag
ptxdesc->txdw4 |= cpu_to_le32(BIT(24));/* DATA_SHORT */
ptxdesc->txdw5 |= cpu_to_le32(MRateToHwRate(pmlmeext->tx_rate));
}
- } else if ((pxmitframe->frame_tag&0x0f) == MGNT_FRAMETAG) {
+ } else if ((pxmitframe->frame_tag & 0x0f) == MGNT_FRAMETAG) {
/* offset 4 */
ptxdesc->txdw1 |= cpu_to_le32(pattrib->mac_id & 0x3f);
- qsel = (uint)(pattrib->qsel&0x0000001f);
+ qsel = (uint)(pattrib->qsel & 0x0000001f);
ptxdesc->txdw1 |= cpu_to_le32((qsel << QSEL_SHT) & 0x00001f00);
ptxdesc->txdw1 |= cpu_to_le32((pattrib->raid << RATE_ID_SHT) & 0x000f0000);
@@ -278,7 +278,7 @@ static s32 update_txdesc(struct xmit_frame *pxmitframe, u8 *pmem, s32 sz, u8 bag
ptxdesc->txdw2 |= cpu_to_le32(BIT(19));
/* offset 12 */
- ptxdesc->txdw3 |= cpu_to_le32((pattrib->seqnum<<SEQ_SHT)&0x0FFF0000);
+ ptxdesc->txdw3 |= cpu_to_le32((pattrib->seqnum << SEQ_SHT) & 0x0FFF0000);
/* offset 20 */
ptxdesc->txdw5 |= cpu_to_le32(RTY_LMT_EN);/* retry limit enable */
@@ -288,7 +288,7 @@ static s32 update_txdesc(struct xmit_frame *pxmitframe, u8 *pmem, s32 sz, u8 bag
ptxdesc->txdw5 |= cpu_to_le32(0x00300000);/* retry limit = 12 */
ptxdesc->txdw5 |= cpu_to_le32(MRateToHwRate(pmlmeext->tx_rate));
- } else if ((pxmitframe->frame_tag&0x0f) == TXAGG_FRAMETAG) {
+ } else if ((pxmitframe->frame_tag & 0x0f) == TXAGG_FRAMETAG) {
DBG_88E("pxmitframe->frame_tag == TXAGG_FRAMETAG\n");
} else {
DBG_88E("pxmitframe->frame_tag = %d\n", pxmitframe->frame_tag);
@@ -301,7 +301,7 @@ static s32 update_txdesc(struct xmit_frame *pxmitframe, u8 *pmem, s32 sz, u8 bag
/* offset 8 */
/* offset 12 */
- ptxdesc->txdw3 |= cpu_to_le32((pattrib->seqnum<<SEQ_SHT)&0x0fff0000);
+ ptxdesc->txdw3 |= cpu_to_le32((pattrib->seqnum << SEQ_SHT) & 0x0fff0000);
/* offset 20 */
ptxdesc->txdw5 |= cpu_to_le32(MRateToHwRate(pmlmeext->tx_rate));
@@ -466,7 +466,7 @@ bool rtl8188eu_xmitframe_complete(struct adapter *adapt,
/* 3 2. aggregate same priority and same DA(AP or STA) frames */
pfirstframe = pxmitframe;
- len = xmitframe_need_length(pfirstframe) + TXDESC_SIZE + (pfirstframe->pkt_offset*PACKET_OFFSET_SZ);
+ len = xmitframe_need_length(pfirstframe) + TXDESC_SIZE + (pfirstframe->pkt_offset * PACKET_OFFSET_SZ);
pbuf_tail = len;
pbuf = round_up(pbuf_tail, 8);
@@ -517,7 +517,7 @@ bool rtl8188eu_xmitframe_complete(struct adapter *adapt,
pxmitframe->agg_num = 0; /* not first frame of aggregation */
pxmitframe->pkt_offset = 0; /* not first frame of aggregation, no need to reserve offset */
- len = xmitframe_need_length(pxmitframe) + TXDESC_SIZE + (pxmitframe->pkt_offset*PACKET_OFFSET_SZ);
+ len = xmitframe_need_length(pxmitframe) + TXDESC_SIZE + (pxmitframe->pkt_offset * PACKET_OFFSET_SZ);
if (round_up(pbuf + len, 8) > MAX_XMITBUF_SZ) {
pxmitframe->agg_num = 1;
--
2.17.1
On Sun, Mar 22, 2020 at 03:51:13AM +0530, Shreeya Patel wrote:
> Add space around operators for improving the code
> readability.
> Reported by checkpatch.pl
>
> git diff -w shows no difference.
> diff of the .o files before and after the changes shows no difference.
There is no need to have these two lines on every changelog comment in
this series :(
And pick a column to line wrap on (usually 72) and stick with that. You
are using two different ones here, and for this whole series, and it
looks very odd, don't you think?
thanks,
greg k-h
On Sun, 2020-03-22 at 12:27 +0100, Greg KH wrote:
> On Sun, Mar 22, 2020 at 03:51:13AM +0530, Shreeya Patel wrote:
> > Add space around operators for improving the code
> > readability.
> > Reported by checkpatch.pl
> >
> > git diff -w shows no difference.
> > diff of the .o files before and after the changes shows no difference.
>
> There is no need to have these two lines on every changelog comment in
> this series :(
In my opinion, there's no need for a series here.
Whitespace only changes _should_ be done all at once.
Whitespace changes _could_ have changed string constants.
So noting that the patch in only whitespace and that
there isn't a difference in object files is useful as
it shows any change has been compiled and tested.
On Sun, 2020-03-22 at 08:09 -0700, Joe Perches wrote:
> On Sun, 2020-03-22 at 12:27 +0100, Greg KH wrote:
Hi Greg and Joe,
> > On Sun, Mar 22, 2020 at 03:51:13AM +0530, Shreeya Patel wrote:
> > > Add space around operators for improving the code
> > > readability.
> > > Reported by checkpatch.pl
> > >
> > > git diff -w shows no difference.
> > > diff of the .o files before and after the changes shows no
> > > difference.
> >
> > There is no need to have these two lines on every changelog comment
> > in
> > this series :(
>
Yes I get that.
> In my opinion, there's no need for a series here.
>
> Whitespace only changes _should_ be done all at once.
>
> Whitespace changes _could_ have changed string constants.
>
> So noting that the patch in only whitespace and that
> there isn't a difference in object files is useful as
> it shows any change has been compiled and tested.
>
Joe, I feel the same thing, there is no need of a patch series
for it but I was given a suggestion that it becomes difficult for the
reviewers to review the patch so it is good to send a patchset instead.
But as you said, we are testing that there is no change in the object
file so we can go ahead with a single patch for all the whitespace
changes.
If you feel this is right then can I go ahead and send a single patch
for it? ( need your or Greg's confirmation before I do it )
Thanks
>
Hi Shreeya,
On Mon, 23 Mar 2020 04:48:08 +0530
Shreeya Patel <[email protected]> wrote:
> On Sun, 2020-03-22 at 08:09 -0700, Joe Perches wrote:
> > On Sun, 2020-03-22 at 12:27 +0100, Greg KH wrote:
>
> Hi Greg and Joe,
>
> > > On Sun, Mar 22, 2020 at 03:51:13AM +0530, Shreeya Patel wrote:
> > > > Add space around operators for improving the code
> > > > readability.
> > > > Reported by checkpatch.pl
> > > >
> > > > git diff -w shows no difference.
> > > > diff of the .o files before and after the changes shows no
> > > > difference.
> > >
> > > There is no need to have these two lines on every changelog comment
> > > in
> > > this series :(
> >
> Yes I get that.
>
> > In my opinion, there's no need for a series here.
> >
> > Whitespace only changes _should_ be done all at once.
> >
> > Whitespace changes _could_ have changed string constants.
> >
> > So noting that the patch in only whitespace and that
> > there isn't a difference in object files is useful as
> > it shows any change has been compiled and tested.
> >
>
> Joe, I feel the same thing, there is no need of a patch series
> for it but I was given a suggestion that it becomes difficult for the
> reviewers to review the patch so it is good to send a patchset instead.
In this case, reviewing the 224 lines you're touching in one shot feels
the same as reviewing them over 11 patches, as the change is always of
the same type. Maybe a single patch is actually even a bit quicker to
review.
Are you sure the suggestion was referring to this, and it wasn't about
different type of changes in the same patch?
--
Stefano
On Mon, 2020-03-23 at 02:04 +0100, Stefano Brivio wrote:
> Hi Shreeya,
>
> On Mon, 23 Mar 2020 04:48:08 +0530
> Shreeya Patel <[email protected]> wrote:
>
> > On Sun, 2020-03-22 at 08:09 -0700, Joe Perches wrote:
> > > On Sun, 2020-03-22 at 12:27 +0100, Greg KH wrote:
> >
> > Hi Greg and Joe,
> >
> > > > On Sun, Mar 22, 2020 at 03:51:13AM +0530, Shreeya Patel
> > > > wrote:
> > > > > Add space around operators for improving the code
> > > > > readability.
> > > > > Reported by checkpatch.pl
> > > > >
> > > > > git diff -w shows no difference.
> > > > > diff of the .o files before and after the changes shows no
> > > > > difference.
> > > >
> > > > There is no need to have these two lines on every changelog
> > > > comment
> > > > in
> > > > this series :(
> > >
> > >
> >
> > Yes I get that.
> >
> > > In my opinion, there's no need for a series here.
> > >
> > > Whitespace only changes _should_ be done all at once.
> > >
> > > Whitespace changes _could_ have changed string constants.
> > >
> > > So noting that the patch in only whitespace and that
> > > there isn't a difference in object files is useful as
> > > it shows any change has been compiled and tested.
> > >
> >
> > Joe, I feel the same thing, there is no need of a patch series
> > for it but I was given a suggestion that it becomes difficult for
> > the
> > reviewers to review the patch so it is good to send a patchset
> > instead.
>
> In this case, reviewing the 224 lines you're touching in one shot
> feels
> the same as reviewing them over 11 patches, as the change is always
> of
> the same type. Maybe a single patch is actually even a bit quicker to
> review.
>
> Are you sure the suggestion was referring to this, and it wasn't
> about
> different type of changes in the same patch?
>
Yes I am sure about it. But anyway I will send a single patch for these
changes now.
Thanks Stefano :)