This is the start of the stable review cycle for the 4.4.276 release.
There are 188 patches in this series, all will be posted as a response
to this one. If anyone has any issues with these being applied, please
let me know.
Responses should be made by Wed, 21 Jul 2021 14:47:42 +0000.
Anything received after that time might be too late.
The whole patch series can be found in one patch at:
https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.4.276-rc1.gz
or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.4.y
and the diffstat can be found below.
thanks,
greg k-h
-------------
Pseudo-Shortlog of commits:
Greg Kroah-Hartman <[email protected]>
Linux 4.4.276-rc1
Martin Fäcknitz <[email protected]>
MIPS: vdso: Invalid GIC access through VDSO
Randy Dunlap <[email protected]>
mips: disable branch profiling in boot/decompress.o
Christophe JAILLET <[email protected]>
scsi: be2iscsi: Fix an error handling path in beiscsi_dev_probe()
Krzysztof Kozlowski <[email protected]>
memory: fsl_ifc: fix leak of private memory on probe failure
Krzysztof Kozlowski <[email protected]>
memory: fsl_ifc: fix leak of IO mapping on probe failure
Dan Carpenter <[email protected]>
rtc: fix snprintf() checking in is_rtc_hctosys()
Krzysztof Kozlowski <[email protected]>
ARM: dts: exynos: fix PWM LED max brightness on Odroid XU4
Nathan Chancellor <[email protected]>
hexagon: use common DISCARDS macro
Zhen Lei <[email protected]>
ALSA: isa: Fix error return code in snd_cmi8330_probe()
Gao Xiang <[email protected]>
nfs: fix acl memory leak of posix_acl_create()
Zhen Lei <[email protected]>
um: fix error return code in winch_tramp()
Zhen Lei <[email protected]>
um: fix error return code in slip_open()
Krzysztof Wilczyński <[email protected]>
PCI/sysfs: Fix dsm_label_utf16s_to_utf8s() buffer overrun
Xie Yongji <[email protected]>
virtio_console: Assure used length from device is limited
Xie Yongji <[email protected]>
virtio-blk: Fix memory leak among suspend/resume procedure
Zou Wei <[email protected]>
power: supply: ab8500: add missing MODULE_DEVICE_TABLE
Zou Wei <[email protected]>
power: supply: charger-manager: add missing MODULE_DEVICE_TABLE
Jeff Layton <[email protected]>
ceph: remove bogus checks and WARN_ONs from ceph_set_page_dirty
Zou Wei <[email protected]>
watchdog: Fix possible use-after-free by calling del_timer_sync()
Zou Wei <[email protected]>
watchdog: sc520_wdt: Fix possible use-after-free in wdt_turnoff()
Zou Wei <[email protected]>
watchdog: Fix possible use-after-free in wdt_startup()
Nick Desaulniers <[email protected]>
ARM: 9087/1: kprobes: test-thumb: fix for LLVM_IAS=1
Bixuan Cui <[email protected]>
power: reset: gpio-poweroff: add missing MODULE_DEVICE_TABLE
Linus Walleij <[email protected]>
power: supply: ab8500: Avoid NULL pointers
Uwe Kleine-König <[email protected]>
pwm: spear: Don't modify HW state in .remove callback
Dimitri John Ledkov <[email protected]>
lib/decompress_unlz4.c: correctly handle zero-padding around initrds.
Jiajun Cao <[email protected]>
ALSA: hda: Add IRQ check for platform_get_irq()
Uwe Kleine-König <[email protected]>
backlight: lm3630a: Fix return code of .update_status() callback
Benjamin Herrenschmidt <[email protected]>
powerpc/boot: Fixup device-tree on little endian
Yang Yingliang <[email protected]>
usb: gadget: hid: fix error return code in hid_bind()
Ruslan Bilovol <[email protected]>
usb: gadget: f_hid: fix endianness issue with descriptors
Takashi Sakamoto <[email protected]>
ALSA: bebob: add support for ToneWeal FW66
Zhen Lei <[email protected]>
ASoC: soc-core: Fix the error return code in snd_soc_of_parse_audio_routing()
Athira Rajeev <[email protected]>
selftests/powerpc: Fix "no_handler" EBB selftest
Yang Yingliang <[email protected]>
ALSA: ppc: fix error return code in snd_pmac_probe()
Srinivas Neeli <[email protected]>
gpio: zynq: Check return value of pm_runtime_get_sync
Geoff Levand <[email protected]>
powerpc/ps3: Add dma_mask to ps3_dma_region
Takashi Iwai <[email protected]>
ALSA: sb: Fix potential double-free of CSP mixer elements
Zou Wei <[email protected]>
mfd: da9052/stmpe: Add and modify MODULE_DEVICE_TABLE
Mike Christie <[email protected]>
scsi: iscsi: Add iscsi_cls_conn refcount helpers
Jiapeng Chong <[email protected]>
fs/jfs: Fix missing error code in lmLogInit()
Christophe JAILLET <[email protected]>
tty: serial: 8250: serial_cs: Fix a memory leak in error handling path
James Smart <[email protected]>
scsi: lpfc: Fix "Unexpected timeout" error in direct attach topology
Takashi Sakamoto <[email protected]>
Revert "ALSA: bebob/oxfw: fix Kconfig entry for Mackie d.2 Pro"
Lv Yunlong <[email protected]>
misc/libmasm/module: Fix two use after free in ibmasm_init_one
Sherry Sun <[email protected]>
tty: serial: fsl_lpuart: fix the potential risk of division or modulo by zero
Lai Jiangshan <[email protected]>
KVM: X86: Disable hardware breakpoints unconditionally before kvm_x86->run()
Sean Christopherson <[email protected]>
KVM: x86: Use guest MAXPHYADDR from CPUID.0x8000_0008 iff TDP is enabled
Pavel Skripkin <[email protected]>
jfs: fix GPF in diFree
Benjamin Drung <[email protected]>
media: uvcvideo: Fix pixel format change for Elgato Cam Link 4K
Johan Hovold <[email protected]>
media: gspca/sunplus: fix zero-length control requests
Johan Hovold <[email protected]>
media: gspca/sq905: fix control-request direction
Pavel Skripkin <[email protected]>
media: zr364xx: fix memory leak in zr364xx_start_readpipe
Hou Tao <[email protected]>
dm btree remove: assign new_root only when removal succeeds
Lv Yunlong <[email protected]>
ipack/carriers/tpci200: Fix a double free in tpci200_pci_probe
Yun Zhou <[email protected]>
seq_buf: Fix overflow in seq_buf_putmem_hex()
Linus Walleij <[email protected]>
power: supply: ab8500: Fix an old bug
Petr Pavlu <[email protected]>
ipmi/watchdog: Stop watchdog timer when the current action is 'none'
Dmitry Osipenko <[email protected]>
ASoC: tegra: Set driver_name=tegra for all machine drivers
Timo Sigurdsson <[email protected]>
ata: ahci_sunxi: Disable DIPM
Al Cooper <[email protected]>
mmc: sdhci: Fix warning message when accessing RPMB in HS400 mode
Nathan Chancellor <[email protected]>
powerpc/barrier: Avoid collision with clang's __lwsync macro
Davis Mosenkovs <[email protected]>
mac80211: fix memory corruption in EAPOL handling
Thadeu Lima de Souza Cascardo <[email protected]>
can: bcm: delay release of struct bcm_op after synchronize_rcu()
Oliver Hartkopp <[email protected]>
can: gw: synchronize rcu operations before removing gw job entry
Miklos Szeredi <[email protected]>
fuse: reject internal errno
Marcelo Ricardo Leitner <[email protected]>
sctp: add size validation when walking chunks
Tim Jiang <[email protected]>
Bluetooth: btusb: fix bt fiwmare downloading failure issue for qca btsoc.
Kai-Heng Feng <[email protected]>
Bluetooth: Shutdown controller after workqueues are flushed or cancelled
Yu Liu <[email protected]>
Bluetooth: Fix the HCI to MGMT status conversion table
Gerd Rausch <[email protected]>
RDMA/cma: Fix rdma_resolve_route() memory leak
Gustavo A. R. Silva <[email protected]>
wireless: wext-spy: Fix out-of-bounds warning
Íñigo Huguet <[email protected]>
sfc: error code if SRIOV cannot be disabled
Íñigo Huguet <[email protected]>
sfc: avoid double pci_remove of VFs
Zheyu Ma <[email protected]>
atm: nicstar: register the interrupt handler in the right place
Zheyu Ma <[email protected]>
atm: nicstar: use 'dma_free_coherent' instead of 'kfree'
Zou Wei <[email protected]>
cw1200: add missing MODULE_DEVICE_TABLE
Lee Gibson <[email protected]>
wl1251: Fix possible buffer overflow in wl1251_cmd_scan
Tony Lindgren <[email protected]>
wlcore/wl12xx: Fix wl12xx get_mac error if device is in ELP
Steffen Klassert <[email protected]>
xfrm: Fix error reporting in xfrm_state_construct.
Minchan Kim <[email protected]>
selinux: use __GFP_NOWARN with GFP_NOWAIT in the AVC
Yang Yingliang <[email protected]>
net: micrel: check return value after calling platform_get_resource()
Joe Thornber <[email protected]>
dm space maps: don't reset space map allocation cursor when committing
Jiapeng Chong <[email protected]>
RDMA/cxgb4: Fix missing error code in create_qp()
Willy Tarreau <[email protected]>
ipv6: use prandom_u32() for ID generation
Jesse Brandeburg <[email protected]>
e100: handle eeprom as little endian
Arturo Giusti <[email protected]>
udf: Fix NULL pointer dereference in udf_symlink function
Xie Yongji <[email protected]>
drm/virtio: Fix double free on probe failure
Pavel Skripkin <[email protected]>
reiserfs: add check for invalid 1st journal block
Sebastian Andrzej Siewior <[email protected]>
net: Treat __napi_schedule_irqoff() as __napi_schedule() on PREEMPT_RT
Zou Wei <[email protected]>
atm: nicstar: Fix possible use-after-free in nicstar_cleanup()
Zou Wei <[email protected]>
mISDN: fix possible use-after-free in HFC_cleanup()
Zou Wei <[email protected]>
atm: iphase: fix possible use-after-free in ia_module_exit()
Bibo Mao <[email protected]>
hugetlb: clear huge pte during flush function on mips platform
Andy Shevchenko <[email protected]>
net: pch_gbe: Use proper accessors to BE data in pch_ptp_match()
Quat Le <[email protected]>
scsi: core: Retry I/O for Notify (Enable Spinup) Required error
Johan Hovold <[email protected]>
mmc: vub3000: fix control-request direction
Marek Szyprowski <[email protected]>
extcon: max8997: Add missing modalias string
Stephan Gerhold <[email protected]>
extcon: sm5502: Drop invalid register write in sm5502_reg_data
Christophe JAILLET <[email protected]>
phy: ti: dm816x: Fix the error handling path in 'dm816x_usb_phy_probe()
Zhen Lei <[email protected]>
scsi: mpt3sas: Fix error return value in _scsih_expander_add()
Dan Carpenter <[email protected]>
staging: gdm724x: check for overflow in gdm_lte_netif_rx()
Dan Carpenter <[email protected]>
staging: gdm724x: check for buffer overflow in gdm_lte_multi_sdu_pkt()
Randy Dunlap <[email protected]>
s390: appldata depends on PROC_SYSCTL
Randy Dunlap <[email protected]>
scsi: FlashPoint: Rename si_flags field
Christophe JAILLET <[email protected]>
tty: nozomi: Fix the error handling path of 'nozomi_card_init()'
Yu Kuai <[email protected]>
char: pcmcia: error out if 'num_bytes_read' is greater than 4 in set_protocol()
Zhen Lei <[email protected]>
Input: hil_kbd - fix error return code in hil_dev_connect()
Jonathan Cameron <[email protected]>
iio: accel: stk8ba50: Fix buffer alignment in iio_push_to_buffers_with_timestamp()
Jonathan Cameron <[email protected]>
iio: accel: stk8312: Fix buffer alignment in iio_push_to_buffers_with_timestamp()
Jonathan Cameron <[email protected]>
iio: accel: bma180: Fix buffer alignment in iio_push_to_buffers_with_timestamp()
Nuno Sa <[email protected]>
iio: adis_buffer: do not return ints in irq handlers
Christophe JAILLET <[email protected]>
tty: nozomi: Fix a resource leak in an error handling function
Muchun Song <[email protected]>
writeback: fix obtain a reference to a freeing memcg css
Dinghao Liu <[email protected]>
i40e: Fix error handling in i40e_vsi_open
Eric Dumazet <[email protected]>
vxlan: add missing rcu_read_lock() in neigh_reduce()
Pavel Skripkin <[email protected]>
net: ethernet: ezchip: fix error handling
Pavel Skripkin <[email protected]>
net: ethernet: ezchip: fix UAF in nps_enet_remove
Pavel Skripkin <[email protected]>
net: ethernet: aeroflex: fix UAF in greth_of_remove
Pablo Neira Ayuso <[email protected]>
netfilter: nft_exthdr: check for IPv6 packet before further processing
Liu Shixin <[email protected]>
netlabel: Fix memory leak in netlbl_mgmt_add_common
Yang Li <[email protected]>
ath10k: Fix an error code in ath10k_add_interface()
Christophe JAILLET <[email protected]>
brcmsmac: mac80211_if: Fix a resource leak in an error handling path
Randy Dunlap <[email protected]>
wireless: carl9170: fix LEDS build errors & warnings
Colin Ian King <[email protected]>
drm: qxl: ensure surf.data is ininitialized
Zhen Lei <[email protected]>
ehea: fix error return code in ehea_restart_qps()
Andy Shevchenko <[email protected]>
net: pch_gbe: Propagate error from devm_gpio_request_one()
Krzysztof Wilczyński <[email protected]>
ACPI: sysfs: Fix a buffer overrun problem with description_show()
Herbert Xu <[email protected]>
crypto: nx - Fix RCU warning in nx842_OF_upd_status
Mirko Vogt <mirko-dev|[email protected]>
spi: spi-sun6i: Fix chipselect/clock bug
Dillon Min <[email protected]>
media: s5p-g2d: Fix a memory leak on ctx->fh.m2m_ctx
Zhen Lei <[email protected]>
mmc: usdhi6rol0: fix error return code in usdhi6_probe()
Gustavo A. R. Silva <[email protected]>
media: siano: Fix out-of-bounds warnings in smscore_load_firmware_family2()
Zhen Lei <[email protected]>
media: tc358743: Fix error return code in tc358743_probe_of()
Sergey Shtylyov <[email protected]>
pata_ep93xx: fix deferred probing
Sergey Shtylyov <[email protected]>
pata_octeon_cf: avoid WARN_ON() in ata_host_activate()
Randy Dunlap <[email protected]>
media: I2C: change 'RST' to "RSET" to fix multiple build errors
Sergey Shtylyov <[email protected]>
pata_rb532_cf: fix deferred probing
Sergey Shtylyov <[email protected]>
sata_highbank: fix deferred probing
Zhen Lei <[email protected]>
crypto: ux500 - Fix error return code in hash_hw_final()
Corentin Labbe <[email protected]>
crypto: ixp4xx - dma_unmap the correct address
Arnd Bergmann <[email protected]>
ia64: mca_drv: fix incorrect array size calculation
Jiapeng Chong <[email protected]>
platform/x86: toshiba_acpi: Fix missing error code in toshiba_acpi_setup_keyboard()
Hanjun Guo <[email protected]>
ACPI: bus: Call kobject_put() in acpi_init() error path
Richard Fitzgerald <[email protected]>
random32: Fix implicit truncation warning in prandom_seed_state()
Alexander Aring <[email protected]>
fs: dlm: cancel work sync othercon
zhangyi (F) <[email protected]>
block_dump: remove block_dump feature in mark_inode_dirty()
Mario Limonciello <[email protected]>
ACPI: processor idle: Fix up C-state latency if not ordered
Axel Lin <[email protected]>
regulator: da9052: Ensure enough delay time for .set_voltage_time_sel
Christophe Leroy <[email protected]>
btrfs: disable build on platforms having page size 256K
Mauro Carvalho Chehab <[email protected]>
media: dvb_net: avoid speculation from net slot
Ard Biesheuvel <[email protected]>
crypto: shash - avoid comparing pointers to exported functions under CFI
Zheyu Ma <[email protected]>
mmc: via-sdmmc: add a check against NULL pointer dereference
Zheyu Ma <[email protected]>
media: bt8xx: Fix a missing check bug in bt878_probe
Lv Yunlong <[email protected]>
media: v4l2-core: Avoid the dangling pointer in v4l2_fh_release
Jack Xu <[email protected]>
crypto: qat - remove unused macro in FW loader
Jack Xu <[email protected]>
crypto: qat - check return code of qat_hal_rd_rel_reg()
Anirudh Rayabharam <[email protected]>
media: pvrusb2: fix warning in pvr2_i2c_core_done
Pavel Skripkin <[email protected]>
media: cpia2: fix memory leak in cpia2_usb_probe
Bixuan Cui <[email protected]>
crypto: nx - add missing MODULE_DEVICE_TABLE
Tian Tao <[email protected]>
spi: omap-100k: Fix the length judgment problem
Jay Fang <[email protected]>
spi: spi-topcliff-pch: Fix potential double free in pch_spi_process_messages()
Miklos Szeredi <[email protected]>
fuse: check connected before queueing on fpq->io
Yun Zhou <[email protected]>
seq_buf: Make trace_seq_putmem_hex() support data longer than 8
Michael Buesch <[email protected]>
ssb: sdio: Don't overwrite const buffer if block_write fails
Pali Rohár <[email protected]>
ath9k: Fix kernel NULL pointer dereference during ath_reset_internal()
Ondrej Zary <[email protected]>
serial_cs: Add Option International GSM-Ready 56K/ISDN modem
Oliver Lang <[email protected]>
iio: ltr501: ltr501_read_ps(): add missing endianness conversion
Oliver Lang <[email protected]>
iio: ltr501: ltr559: fix initialization of LTR501_ALS_CONTR
Marc Kleine-Budde <[email protected]>
iio: ltr501: mark register holding upper 8 bits of ALS_DATA{0,1} and PS_DATA as volatile, too
Vineeth Vijayan <[email protected]>
s390/cio: dont call css_wait_for_slow_path() inside a lock
Zhang Xiaoxu <[email protected]>
SUNRPC: Should wake up the privileged task firstly.
Zhang Xiaoxu <[email protected]>
SUNRPC: Fix the batch tasks count wraparound.
Pan Dong <[email protected]>
ext4: fix avefreec in find_group_orlov
Zhang Yi <[email protected]>
ext4: remove check for zero nr_to_scan in ext4_es_scan()
Zhang Yi <[email protected]>
ext4: correct the cache_nr in tracepoint ext4_es_shrink_exit
Anirudh Rayabharam <[email protected]>
ext4: fix kernel infoleak via ext4_extent_header
David Sterba <[email protected]>
btrfs: clear defrag status of a root if starting transaction fails
Ludovic Desroches <[email protected]>
ARM: dts: at91: sama5d4: fix pinctrl muxing
Alexander Larkin <[email protected]>
Input: joydev - prevent use of not validated data in JSIOCSBTNMAP ioctl
Al Viro <[email protected]>
iov_iter_fault_in_readable() should do nothing in xarray case
Desmond Cheong Zhi Xi <[email protected]>
ntfs: fix validity check for file name attribute
Hannu Hartikainen <[email protected]>
USB: cdc-acm: blacklist Heimann USB Appset device
Linyu Yuan <[email protected]>
usb: gadget: eem: fix echo command packet response issue
Pavel Skripkin <[email protected]>
net: can: ems_usb: fix use-after-free in ems_usb_disconnect()
Johan Hovold <[email protected]>
Input: usbtouchscreen - fix control-request directions
Pavel Skripkin <[email protected]>
media: dvb-usb: fix wrong definition
Daehwan Jung <[email protected]>
ALSA: usb-audio: fix rate on Ozone Z90 USB headset
-------------
Diffstat:
Makefile | 4 +-
arch/arm/boot/dts/exynos5422-odroidxu4.dts | 2 +-
arch/arm/boot/dts/sama5d4.dtsi | 2 +-
arch/arm/probes/kprobes/test-thumb.c | 10 ++--
arch/hexagon/kernel/vmlinux.lds.S | 7 +--
arch/ia64/kernel/mca_drv.c | 2 +-
arch/mips/boot/compressed/decompress.c | 2 +
arch/mips/include/asm/hugetlb.h | 8 ++-
arch/mips/vdso/vdso.h | 2 +-
arch/powerpc/boot/devtree.c | 59 +++++++++++++---------
arch/powerpc/boot/ns16550.c | 9 +++-
arch/powerpc/include/asm/barrier.h | 2 +
arch/powerpc/include/asm/ps3.h | 2 +
arch/powerpc/platforms/ps3/mm.c | 12 +++++
arch/s390/Kconfig | 2 +-
arch/um/drivers/chan_user.c | 3 +-
arch/um/drivers/slip_user.c | 3 +-
arch/x86/kvm/cpuid.c | 8 ++-
arch/x86/kvm/x86.c | 2 +
crypto/shash.c | 18 +++++--
drivers/acpi/bus.c | 1 +
drivers/acpi/device_sysfs.c | 2 +-
drivers/acpi/processor_idle.c | 40 +++++++++++++++
drivers/ata/ahci_sunxi.c | 2 +-
drivers/ata/pata_ep93xx.c | 2 +-
drivers/ata/pata_octeon_cf.c | 5 +-
drivers/ata/pata_rb532_cf.c | 6 ++-
drivers/ata/sata_highbank.c | 6 ++-
drivers/atm/iphase.c | 2 +-
drivers/atm/nicstar.c | 26 +++++-----
drivers/block/virtio_blk.c | 2 +
drivers/bluetooth/btusb.c | 5 ++
drivers/char/ipmi/ipmi_watchdog.c | 22 ++++----
drivers/char/pcmcia/cm4000_cs.c | 4 ++
drivers/char/virtio_console.c | 4 +-
drivers/crypto/ixp4xx_crypto.c | 2 +-
drivers/crypto/nx/nx-842-pseries.c | 9 ++--
drivers/crypto/qat/qat_common/qat_hal.c | 6 ++-
drivers/crypto/qat/qat_common/qat_uclo.c | 1 -
drivers/crypto/ux500/hash/hash_core.c | 1 +
drivers/extcon/extcon-max8997.c | 1 +
drivers/extcon/extcon-sm5502.c | 1 -
drivers/gpio/gpio-zynq.c | 5 +-
drivers/gpu/drm/qxl/qxl_dumb.c | 2 +
drivers/gpu/drm/virtio/virtgpu_kms.c | 1 +
drivers/iio/accel/bma180.c | 10 ++--
drivers/iio/accel/stk8312.c | 12 +++--
drivers/iio/accel/stk8ba50.c | 17 +++----
drivers/iio/imu/adis_buffer.c | 3 --
drivers/iio/light/ltr501.c | 15 ++++--
drivers/infiniband/core/cma.c | 3 +-
drivers/infiniband/hw/cxgb4/qp.c | 1 +
drivers/input/joydev.c | 2 +-
drivers/input/keyboard/hil_kbd.c | 1 +
drivers/input/touchscreen/usbtouchscreen.c | 8 +--
drivers/ipack/carriers/tpci200.c | 5 +-
drivers/isdn/hardware/mISDN/hfcpci.c | 2 +-
drivers/md/persistent-data/dm-btree-remove.c | 3 +-
drivers/md/persistent-data/dm-space-map-disk.c | 9 +++-
drivers/md/persistent-data/dm-space-map-metadata.c | 9 +++-
drivers/media/common/siano/smscoreapi.c | 22 ++++----
drivers/media/common/siano/smscoreapi.h | 4 +-
drivers/media/dvb-core/dvb_net.c | 25 ++++++---
drivers/media/i2c/s5c73m3/s5c73m3-core.c | 6 +--
drivers/media/i2c/s5c73m3/s5c73m3.h | 2 +-
drivers/media/i2c/s5k4ecgx.c | 10 ++--
drivers/media/i2c/s5k5baf.c | 6 +--
drivers/media/i2c/s5k6aa.c | 10 ++--
drivers/media/i2c/tc358743.c | 1 +
drivers/media/pci/bt8xx/bt878.c | 3 ++
drivers/media/platform/s5p-g2d/g2d.c | 3 ++
drivers/media/usb/cpia2/cpia2.h | 1 +
drivers/media/usb/cpia2/cpia2_core.c | 12 +++++
drivers/media/usb/cpia2/cpia2_usb.c | 13 ++---
drivers/media/usb/dvb-usb/cxusb.c | 2 +-
drivers/media/usb/gspca/sq905.c | 2 +-
drivers/media/usb/gspca/sunplus.c | 8 ++-
drivers/media/usb/pvrusb2/pvrusb2-hdw.c | 4 +-
drivers/media/usb/uvc/uvc_video.c | 27 ++++++++++
drivers/media/usb/zr364xx/zr364xx.c | 1 +
drivers/media/v4l2-core/v4l2-fh.c | 1 +
drivers/memory/fsl_ifc.c | 8 +--
drivers/mfd/da9052-i2c.c | 1 +
drivers/mfd/stmpe-i2c.c | 2 +-
drivers/misc/ibmasm/module.c | 5 +-
drivers/mmc/host/sdhci.c | 4 ++
drivers/mmc/host/sdhci.h | 1 +
drivers/mmc/host/usdhi6rol0.c | 1 +
drivers/mmc/host/via-sdmmc.c | 3 ++
drivers/mmc/host/vub300.c | 2 +-
drivers/net/can/usb/ems_usb.c | 3 +-
drivers/net/ethernet/aeroflex/greth.c | 3 +-
drivers/net/ethernet/ezchip/nps_enet.c | 4 +-
drivers/net/ethernet/ibm/ehea/ehea_main.c | 9 ++--
drivers/net/ethernet/intel/e100.c | 12 ++---
drivers/net/ethernet/intel/i40e/i40e_main.c | 2 +
drivers/net/ethernet/micrel/ks8842.c | 4 ++
.../net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c | 29 +++++------
drivers/net/ethernet/sfc/ef10_sriov.c | 25 +++++----
drivers/net/vxlan.c | 2 +
drivers/net/wireless/ath/ath10k/mac.c | 1 +
drivers/net/wireless/ath/ath9k/main.c | 5 ++
drivers/net/wireless/ath/carl9170/Kconfig | 8 ++-
.../net/wireless/brcm80211/brcmsmac/mac80211_if.c | 8 ++-
drivers/net/wireless/cw1200/cw1200_sdio.c | 1 +
drivers/net/wireless/ti/wl1251/cmd.c | 9 ++--
drivers/net/wireless/ti/wl12xx/main.c | 7 +++
drivers/pci/pci-label.c | 2 +-
drivers/phy/phy-dm816x-usb.c | 17 +++++--
drivers/platform/x86/toshiba_acpi.c | 1 +
drivers/power/ab8500_btemp.c | 1 +
drivers/power/ab8500_charger.c | 19 ++++++-
drivers/power/ab8500_fg.c | 1 +
drivers/power/charger-manager.c | 1 +
drivers/power/reset/gpio-poweroff.c | 1 +
drivers/pwm/pwm-spear.c | 4 --
drivers/regulator/da9052-regulator.c | 3 +-
drivers/rtc/rtc-proc.c | 4 +-
drivers/s390/cio/chp.c | 3 ++
drivers/s390/cio/chsc.c | 2 -
drivers/scsi/FlashPoint.c | 32 ++++++------
drivers/scsi/be2iscsi/be_main.c | 1 +
drivers/scsi/libiscsi.c | 7 +--
drivers/scsi/lpfc/lpfc_els.c | 9 ++++
drivers/scsi/mpt3sas/mpt3sas_scsih.c | 4 +-
drivers/scsi/scsi_lib.c | 1 +
drivers/scsi/scsi_transport_iscsi.c | 12 +++++
drivers/spi/spi-omap-100k.c | 2 +-
drivers/spi/spi-sun6i.c | 6 ++-
drivers/spi/spi-topcliff-pch.c | 4 +-
drivers/ssb/sdio.c | 1 -
drivers/staging/gdm724x/gdm_lte.c | 20 ++++++--
drivers/tty/nozomi.c | 9 ++--
drivers/tty/serial/8250/serial_cs.c | 12 ++++-
drivers/tty/serial/fsl_lpuart.c | 3 ++
drivers/usb/class/cdc-acm.c | 5 ++
drivers/usb/gadget/function/f_eem.c | 43 ++++++++++++++--
drivers/usb/gadget/function/f_hid.c | 2 +-
drivers/usb/gadget/legacy/hid.c | 4 +-
drivers/video/backlight/lm3630a_bl.c | 12 ++---
drivers/watchdog/lpc18xx_wdt.c | 2 +-
drivers/watchdog/sbc60xxwdt.c | 2 +-
drivers/watchdog/sc520_wdt.c | 2 +-
drivers/watchdog/w83877f_wdt.c | 2 +-
fs/btrfs/Kconfig | 2 +
fs/btrfs/transaction.c | 6 ++-
fs/ceph/addr.c | 10 +---
fs/dlm/lowcomms.c | 2 +-
fs/ext4/extents.c | 3 ++
fs/ext4/extents_status.c | 4 +-
fs/ext4/ialloc.c | 11 ++--
fs/fs-writeback.c | 34 +++----------
fs/fuse/dev.c | 11 +++-
fs/jfs/inode.c | 3 +-
fs/jfs/jfs_logmgr.c | 1 +
fs/nfs/nfs3proc.c | 4 +-
fs/ntfs/inode.c | 2 +-
fs/reiserfs/journal.c | 14 +++++
fs/udf/namei.c | 4 ++
include/crypto/internal/hash.h | 8 +--
include/linux/mfd/abx500/ux500_chargalg.h | 2 +-
include/linux/prandom.h | 2 +-
include/scsi/scsi_transport_iscsi.h | 2 +
lib/decompress_unlz4.c | 8 +++
lib/iov_iter.c | 2 +-
lib/seq_buf.c | 8 ++-
net/bluetooth/hci_core.c | 16 +++---
net/bluetooth/mgmt.c | 3 ++
net/can/bcm.c | 7 ++-
net/can/gw.c | 3 ++
net/core/dev.c | 11 +++-
net/ipv6/output_core.c | 28 ++--------
net/mac80211/rx.c | 2 +-
net/netfilter/nft_exthdr.c | 3 ++
net/netlabel/netlabel_mgmt.c | 19 +++----
net/sctp/input.c | 2 +-
net/sunrpc/sched.c | 12 ++++-
net/wireless/wext-spy.c | 14 ++---
net/xfrm/xfrm_user.c | 28 +++++-----
security/selinux/avc.c | 13 ++---
sound/firewire/Kconfig | 5 +-
sound/firewire/bebob/bebob.c | 5 +-
sound/firewire/oxfw/oxfw.c | 2 +-
sound/isa/cmi8330.c | 2 +-
sound/isa/sb/sb16_csp.c | 8 ++-
sound/pci/hda/hda_tegra.c | 3 ++
sound/ppc/powermac.c | 6 ++-
sound/soc/soc-core.c | 2 +-
sound/soc/tegra/tegra_alc5632.c | 1 +
sound/soc/tegra/tegra_max98090.c | 1 +
sound/soc/tegra/tegra_rt5640.c | 1 +
sound/soc/tegra/tegra_rt5677.c | 1 +
sound/soc/tegra/tegra_wm8753.c | 1 +
sound/soc/tegra/tegra_wm8903.c | 1 +
sound/soc/tegra/tegra_wm9712.c | 1 +
sound/soc/tegra/trimslice.c | 1 +
sound/usb/format.c | 2 +
.../selftests/powerpc/pmu/ebb/no_handler_test.c | 2 -
198 files changed, 891 insertions(+), 453 deletions(-)
From: Sergey Shtylyov <[email protected]>
[ Upstream commit 4a24efa16e7db02306fb5db84518bb0a7ada5a46 ]
The driver overrides the error codes returned by platform_get_irq() to
-EINVAL, so if it returns -EPROBE_DEFER, the driver would fail the probe
permanently instead of the deferred probing. Switch to propagating the
error code upstream, still checking/overriding IRQ0 as libata regards it
as "no IRQ" (thus polling) anyway...
Fixes: 9ec36cafe43b ("of/irq: do irq resolution in platform_get_irq")
Signed-off-by: Sergey Shtylyov <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jens Axboe <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/ata/sata_highbank.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/drivers/ata/sata_highbank.c b/drivers/ata/sata_highbank.c
index 8638d575b2b9..77691154d2f1 100644
--- a/drivers/ata/sata_highbank.c
+++ b/drivers/ata/sata_highbank.c
@@ -483,10 +483,12 @@ static int ahci_highbank_probe(struct platform_device *pdev)
}
irq = platform_get_irq(pdev, 0);
- if (irq <= 0) {
+ if (irq < 0) {
dev_err(dev, "no irq\n");
- return -EINVAL;
+ return irq;
}
+ if (!irq)
+ return -EINVAL;
hpriv = devm_kzalloc(dev, sizeof(*hpriv), GFP_KERNEL);
if (!hpriv) {
--
2.30.2
From: Pavel Skripkin <[email protected]>
commit ab4a0b8fcb9a95c02909b62049811bd2e586aaa4 upstream.
In ems_usb_disconnect() dev pointer, which is netdev private data, is
used after free_candev() call:
| if (dev) {
| unregister_netdev(dev->netdev);
| free_candev(dev->netdev);
|
| unlink_all_urbs(dev);
|
| usb_free_urb(dev->intr_urb);
|
| kfree(dev->intr_in_buffer);
| kfree(dev->tx_msg_buffer);
| }
Fix it by simply moving free_candev() at the end of the block.
Fail log:
| BUG: KASAN: use-after-free in ems_usb_disconnect
| Read of size 8 at addr ffff88804e041008 by task kworker/1:2/2895
|
| CPU: 1 PID: 2895 Comm: kworker/1:2 Not tainted 5.13.0-rc5+ #164
| Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a-rebuilt.opensuse.4
| Workqueue: usb_hub_wq hub_event
| Call Trace:
| dump_stack (lib/dump_stack.c:122)
| print_address_description.constprop.0.cold (mm/kasan/report.c:234)
| kasan_report.cold (mm/kasan/report.c:420 mm/kasan/report.c:436)
| ems_usb_disconnect (drivers/net/can/usb/ems_usb.c:683 drivers/net/can/usb/ems_usb.c:1058)
Fixes: 702171adeed3 ("ems_usb: Added support for EMS CPC-USB/ARM7 CAN/USB interface")
Link: https://lore.kernel.org/r/[email protected]
Cc: linux-stable <[email protected]>
Signed-off-by: Pavel Skripkin <[email protected]>
Signed-off-by: Marc Kleine-Budde <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/can/usb/ems_usb.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/drivers/net/can/usb/ems_usb.c
+++ b/drivers/net/can/usb/ems_usb.c
@@ -1071,7 +1071,6 @@ static void ems_usb_disconnect(struct us
if (dev) {
unregister_netdev(dev->netdev);
- free_candev(dev->netdev);
unlink_all_urbs(dev);
@@ -1079,6 +1078,8 @@ static void ems_usb_disconnect(struct us
kfree(dev->intr_in_buffer);
kfree(dev->tx_msg_buffer);
+
+ free_candev(dev->netdev);
}
}
From: Sergey Shtylyov <[email protected]>
[ Upstream commit 5c8121262484d99bffb598f39a0df445cecd8efb ]
The driver overrides the error codes returned by platform_get_irq() to
-ENXIO, so if it returns -EPROBE_DEFER, the driver would fail the probe
permanently instead of the deferred probing. Propagate the error code
upstream, as it should have been done from the start...
Fixes: 2fff27512600 ("PATA host controller driver for ep93xx")
Signed-off-by: Sergey Shtylyov <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jens Axboe <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/ata/pata_ep93xx.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/ata/pata_ep93xx.c b/drivers/ata/pata_ep93xx.c
index 634c814cbeda..ebdd2dfabbeb 100644
--- a/drivers/ata/pata_ep93xx.c
+++ b/drivers/ata/pata_ep93xx.c
@@ -927,7 +927,7 @@ static int ep93xx_pata_probe(struct platform_device *pdev)
/* INT[3] (IRQ_EP93XX_EXT3) line connected as pull down */
irq = platform_get_irq(pdev, 0);
if (irq < 0) {
- err = -ENXIO;
+ err = irq;
goto err_rel_gpio;
}
--
2.30.2
From: Al Viro <[email protected]>
commit 0e8f0d67401589a141950856902c7d0ec8d9c985 upstream.
... and actually should just check it's given an iovec-backed iterator
in the first place.
Cc: [email protected]
Signed-off-by: Al Viro <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
lib/iov_iter.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/lib/iov_iter.c
+++ b/lib/iov_iter.c
@@ -311,7 +311,7 @@ int iov_iter_fault_in_readable(struct io
int err;
struct iovec v;
- if (!(i->type & (ITER_BVEC|ITER_KVEC))) {
+ if (iter_is_iovec(i)) {
iterate_iovec(i, bytes, v, iov, skip, ({
err = fault_in_multipages_readable(v.iov_base,
v.iov_len);
From: Lv Yunlong <[email protected]>
[ Upstream commit 7dd0c9e547b6924e18712b6b51aa3cba1896ee2c ]
A use after free bug caused by the dangling pointer
filp->privitate_data in v4l2_fh_release.
See https://lore.kernel.org/patchwork/patch/1419058/.
My patch sets the dangling pointer to NULL to provide
robust.
Signed-off-by: Lv Yunlong <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/media/v4l2-core/v4l2-fh.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/media/v4l2-core/v4l2-fh.c b/drivers/media/v4l2-core/v4l2-fh.c
index 1d076deb05a9..ce844ecc3340 100644
--- a/drivers/media/v4l2-core/v4l2-fh.c
+++ b/drivers/media/v4l2-core/v4l2-fh.c
@@ -107,6 +107,7 @@ int v4l2_fh_release(struct file *filp)
v4l2_fh_del(fh);
v4l2_fh_exit(fh);
kfree(fh);
+ filp->private_data = NULL;
}
return 0;
}
--
2.30.2
From: Zhen Lei <[email protected]>
[ Upstream commit 2f9ae69e5267f53e89e296fccee291975a85f0eb ]
Fix to return a negative error code from the error handling case instead
of 0, as done elsewhere in this function.
Fixes: 75fa9ea6e3c0 ("mmc: add a driver for the Renesas usdhi6rol0 SD/SDIO host controller")
Reported-by: Hulk Robot <[email protected]>
Signed-off-by: Zhen Lei <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Ulf Hansson <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/mmc/host/usdhi6rol0.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/mmc/host/usdhi6rol0.c b/drivers/mmc/host/usdhi6rol0.c
index 2b6a9c6a6e96..49798a68299e 100644
--- a/drivers/mmc/host/usdhi6rol0.c
+++ b/drivers/mmc/host/usdhi6rol0.c
@@ -1751,6 +1751,7 @@ static int usdhi6_probe(struct platform_device *pdev)
version = usdhi6_read(host, USDHI6_VERSION);
if ((version & 0xfff) != 0xa0d) {
+ ret = -EPERM;
dev_err(dev, "Version not recognized %x\n", version);
goto e_clk_off;
}
--
2.30.2
From: Andy Shevchenko <[email protected]>
[ Upstream commit 9e3617a7b84512bf96c04f9cf82d1a7257d33794 ]
If GPIO controller is not available yet we need to defer
the probe of GBE until provider will become available.
While here, drop GPIOF_EXPORT because it's deprecated and
may not be available.
Fixes: f1a26fdf5944 ("pch_gbe: Add MinnowBoard support")
Signed-off-by: Andy Shevchenko <[email protected]>
Tested-by: Flavio Suligoi <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c | 10 +++++++---
1 file changed, 7 insertions(+), 3 deletions(-)
diff --git a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c
index 3b98b263bad0..a7ec9492d126 100644
--- a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c
+++ b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c
@@ -2625,9 +2625,13 @@ static int pch_gbe_probe(struct pci_dev *pdev,
adapter->pdev = pdev;
adapter->hw.back = adapter;
adapter->hw.reg = pcim_iomap_table(pdev)[PCH_GBE_PCI_BAR];
+
adapter->pdata = (struct pch_gbe_privdata *)pci_id->driver_data;
- if (adapter->pdata && adapter->pdata->platform_init)
- adapter->pdata->platform_init(pdev);
+ if (adapter->pdata && adapter->pdata->platform_init) {
+ ret = adapter->pdata->platform_init(pdev);
+ if (ret)
+ goto err_free_netdev;
+ }
adapter->ptp_pdev = pci_get_bus_and_slot(adapter->pdev->bus->number,
PCI_DEVFN(12, 4));
@@ -2717,7 +2721,7 @@ err_free_netdev:
*/
static int pch_gbe_minnow_platform_init(struct pci_dev *pdev)
{
- unsigned long flags = GPIOF_DIR_OUT | GPIOF_INIT_HIGH | GPIOF_EXPORT;
+ unsigned long flags = GPIOF_OUT_INIT_HIGH;
unsigned gpio = MINNOW_PHY_RESET_GPIO;
int ret;
--
2.30.2
From: Jiapeng Chong <[email protected]>
[ Upstream commit 28e367127718a9cb85d615a71e152f7acee41bfc ]
The error code is missing in this code scenario, add the error code
'-EINVAL' to the return value 'error'.
Eliminate the follow smatch warning:
drivers/platform/x86/toshiba_acpi.c:2834 toshiba_acpi_setup_keyboard()
warn: missing error code 'error'.
Reported-by: Abaci Robot <[email protected]>
Signed-off-by: Jiapeng Chong <[email protected]>
Link: https://lore.kernel.org/r/1622628348-87035-1-git-send-email-jiapeng.chong@linux.alibaba.com
Signed-off-by: Hans de Goede <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/platform/x86/toshiba_acpi.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/platform/x86/toshiba_acpi.c b/drivers/platform/x86/toshiba_acpi.c
index 1ff95b5a429d..974d4ac78d10 100644
--- a/drivers/platform/x86/toshiba_acpi.c
+++ b/drivers/platform/x86/toshiba_acpi.c
@@ -2448,6 +2448,7 @@ static int toshiba_acpi_setup_keyboard(struct toshiba_acpi_dev *dev)
if (!dev->info_supported && !dev->system_event_supported) {
pr_warn("No hotkey query interface found\n");
+ error = -EINVAL;
goto err_remove_filter;
}
--
2.30.2
From: Corentin Labbe <[email protected]>
[ Upstream commit 9395c58fdddd79cdd3882132cdd04e8ac7ad525f ]
Testing ixp4xx_crypto with CONFIG_DMA_API_DEBUG lead to the following error:
DMA-API: platform ixp4xx_crypto.0: device driver tries to free DMA memory it has not allocated [device address=0x0000000000000000] [size=24 bytes]
This is due to dma_unmap using the wrong address.
Fixes: 0d44dc59b2b4 ("crypto: ixp4xx - Fix handling of chained sg buffers")
Signed-off-by: Corentin Labbe <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/crypto/ixp4xx_crypto.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/crypto/ixp4xx_crypto.c b/drivers/crypto/ixp4xx_crypto.c
index 13657105cfb9..8d0613170d57 100644
--- a/drivers/crypto/ixp4xx_crypto.c
+++ b/drivers/crypto/ixp4xx_crypto.c
@@ -334,7 +334,7 @@ static void free_buf_chain(struct device *dev, struct buffer_desc *buf,u32 phys)
buf1 = buf->next;
phys1 = buf->phys_next;
- dma_unmap_single(dev, buf->phys_next, buf->buf_len, buf->dir);
+ dma_unmap_single(dev, buf->phys_addr, buf->buf_len, buf->dir);
dma_pool_free(buffer_pool, buf, phys);
buf = buf1;
phys = phys1;
--
2.30.2
From: Herbert Xu <[email protected]>
[ Upstream commit 2a96726bd0ccde4f12b9b9a9f61f7b1ac5af7e10 ]
The function nx842_OF_upd_status triggers a sparse RCU warning when
it directly dereferences the RCU-protected devdata. This appears
to be an accident as there was another variable of the same name
that was passed in from the caller.
After it was removed (because the main purpose of using it, to
update the status member was itself removed) the global variable
unintenionally stood in as its replacement.
This patch restores the devdata parameter.
Fixes: 90fd73f912f0 ("crypto: nx - remove pSeries NX 'status' field")
Signed-off-by: Herbert Xu <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/crypto/nx/nx-842-pseries.c | 8 +++++---
1 file changed, 5 insertions(+), 3 deletions(-)
diff --git a/drivers/crypto/nx/nx-842-pseries.c b/drivers/crypto/nx/nx-842-pseries.c
index 2e5b4004f0ee..1b8c87770645 100644
--- a/drivers/crypto/nx/nx-842-pseries.c
+++ b/drivers/crypto/nx/nx-842-pseries.c
@@ -553,13 +553,15 @@ static int nx842_OF_set_defaults(struct nx842_devdata *devdata)
* The status field indicates if the device is enabled when the status
* is 'okay'. Otherwise the device driver will be disabled.
*
- * @prop - struct property point containing the maxsyncop for the update
+ * @devdata: struct nx842_devdata to use for dev_info
+ * @prop: struct property point containing the maxsyncop for the update
*
* Returns:
* 0 - Device is available
* -ENODEV - Device is not available
*/
-static int nx842_OF_upd_status(struct property *prop)
+static int nx842_OF_upd_status(struct nx842_devdata *devdata,
+ struct property *prop)
{
const char *status = (const char *)prop->value;
@@ -773,7 +775,7 @@ static int nx842_OF_upd(struct property *new_prop)
goto out;
/* Perform property updates */
- ret = nx842_OF_upd_status(status);
+ ret = nx842_OF_upd_status(new_devdata, status);
if (ret)
goto error_out;
--
2.30.2
From: Zhen Lei <[email protected]>
[ Upstream commit 015dbf5662fd689d581c0bc980711b073ca09a1a ]
Fix to return -EFAULT from the error handling case instead of 0, as done
elsewhere in this function.
By the way, when get_zeroed_page() fails, directly return -ENOMEM to
simplify code.
Fixes: 2c69448bbced ("ehea: DLPAR memory add fix")
Reported-by: Hulk Robot <[email protected]>
Signed-off-by: Zhen Lei <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/ibm/ehea/ehea_main.c | 9 +++++----
1 file changed, 5 insertions(+), 4 deletions(-)
diff --git a/drivers/net/ethernet/ibm/ehea/ehea_main.c b/drivers/net/ethernet/ibm/ehea/ehea_main.c
index efe84ca20da7..43fc6d370457 100644
--- a/drivers/net/ethernet/ibm/ehea/ehea_main.c
+++ b/drivers/net/ethernet/ibm/ehea/ehea_main.c
@@ -2654,10 +2654,8 @@ static int ehea_restart_qps(struct net_device *dev)
u16 dummy16 = 0;
cb0 = (void *)get_zeroed_page(GFP_KERNEL);
- if (!cb0) {
- ret = -ENOMEM;
- goto out;
- }
+ if (!cb0)
+ return -ENOMEM;
for (i = 0; i < (port->num_def_qps); i++) {
struct ehea_port_res *pr = &port->port_res[i];
@@ -2677,6 +2675,7 @@ static int ehea_restart_qps(struct net_device *dev)
cb0);
if (hret != H_SUCCESS) {
netdev_err(dev, "query_ehea_qp failed (1)\n");
+ ret = -EFAULT;
goto out;
}
@@ -2689,6 +2688,7 @@ static int ehea_restart_qps(struct net_device *dev)
&dummy64, &dummy16, &dummy16);
if (hret != H_SUCCESS) {
netdev_err(dev, "modify_ehea_qp failed (1)\n");
+ ret = -EFAULT;
goto out;
}
@@ -2697,6 +2697,7 @@ static int ehea_restart_qps(struct net_device *dev)
cb0);
if (hret != H_SUCCESS) {
netdev_err(dev, "query_ehea_qp failed (2)\n");
+ ret = -EFAULT;
goto out;
}
--
2.30.2
From: Sergey Shtylyov <[email protected]>
[ Upstream commit 2d3a62fbae8e5badc2342388f65ab2191c209cc0 ]
The driver overrides the error codes returned by platform_get_irq() to
-ENOENT, so if it returns -EPROBE_DEFER, the driver would fail the probe
permanently instead of the deferred probing. Switch to propagating the
error code upstream, still checking/overriding IRQ0 as libata regards it
as "no IRQ" (thus polling) anyway...
Fixes: 9ec36cafe43b ("of/irq: do irq resolution in platform_get_irq")
Signed-off-by: Sergey Shtylyov <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jens Axboe <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/ata/pata_rb532_cf.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/drivers/ata/pata_rb532_cf.c b/drivers/ata/pata_rb532_cf.c
index c8b6a780a290..76c550e160f6 100644
--- a/drivers/ata/pata_rb532_cf.c
+++ b/drivers/ata/pata_rb532_cf.c
@@ -120,10 +120,12 @@ static int rb532_pata_driver_probe(struct platform_device *pdev)
}
irq = platform_get_irq(pdev, 0);
- if (irq <= 0) {
+ if (irq < 0) {
dev_err(&pdev->dev, "no IRQ resource found\n");
- return -ENOENT;
+ return irq;
}
+ if (!irq)
+ return -EINVAL;
pdata = dev_get_platdata(&pdev->dev);
if (!pdata) {
--
2.30.2
From: Bixuan Cui <[email protected]>
[ Upstream commit 06676aa1f455c74e3ad1624cea3acb9ed2ef71ae ]
This patch adds missing MODULE_DEVICE_TABLE definition which generates
correct modalias for automatic loading of this driver when it is built
as an external module.
Reported-by: Hulk Robot <[email protected]>
Signed-off-by: Bixuan Cui <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/crypto/nx/nx-842-pseries.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/crypto/nx/nx-842-pseries.c b/drivers/crypto/nx/nx-842-pseries.c
index cddc6d8b55d9..2e5b4004f0ee 100644
--- a/drivers/crypto/nx/nx-842-pseries.c
+++ b/drivers/crypto/nx/nx-842-pseries.c
@@ -1086,6 +1086,7 @@ static struct vio_device_id nx842_vio_driver_ids[] = {
{"ibm,compression-v1", "ibm,compression"},
{"", ""},
};
+MODULE_DEVICE_TABLE(vio, nx842_vio_driver_ids);
static struct vio_driver nx842_vio_driver = {
.name = KBUILD_MODNAME,
--
2.30.2
From: Pavel Skripkin <[email protected]>
[ Upstream commit e4b8700e07a86e8eab6916aa5c5ba99042c34089 ]
priv is netdev private data, but it is used
after free_netdev(). It can cause use-after-free when accessing priv
pointer. So, fix it by moving free_netdev() after netif_napi_del()
call.
Fixes: 0dd077093636 ("NET: Add ezchip ethernet driver")
Signed-off-by: Pavel Skripkin <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/ezchip/nps_enet.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/ezchip/nps_enet.c b/drivers/net/ethernet/ezchip/nps_enet.c
index b1026689b78f..73d2bc349b2f 100644
--- a/drivers/net/ethernet/ezchip/nps_enet.c
+++ b/drivers/net/ethernet/ezchip/nps_enet.c
@@ -621,8 +621,8 @@ static s32 nps_enet_remove(struct platform_device *pdev)
struct nps_enet_priv *priv = netdev_priv(ndev);
unregister_netdev(ndev);
- free_netdev(ndev);
netif_napi_del(&priv->napi);
+ free_netdev(ndev);
return 0;
}
--
2.30.2
From: Sergey Shtylyov <[email protected]>
[ Upstream commit bfc1f378c8953e68ccdbfe0a8c20748427488b80 ]
Iff platform_get_irq() fails (or returns IRQ0) and thus the polling mode
has to be used, ata_host_activate() hits the WARN_ON() due to 'irq_handler'
parameter being non-NULL if the polling mode is selected. Let's only set
the pointer to the driver's IRQ handler if platform_get_irq() returns a
valid IRQ # -- this should avoid the unnecessary WARN_ON()...
Fixes: 43f01da0f279 ("MIPS/OCTEON/ata: Convert pata_octeon_cf.c to use device tree.")
Signed-off-by: Sergey Shtylyov <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jens Axboe <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/ata/pata_octeon_cf.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/drivers/ata/pata_octeon_cf.c b/drivers/ata/pata_octeon_cf.c
index 27245957eee3..909de33f9158 100644
--- a/drivers/ata/pata_octeon_cf.c
+++ b/drivers/ata/pata_octeon_cf.c
@@ -909,10 +909,11 @@ static int octeon_cf_probe(struct platform_device *pdev)
return -EINVAL;
}
- irq_handler = octeon_cf_interrupt;
i = platform_get_irq(dma_dev, 0);
- if (i > 0)
+ if (i > 0) {
irq = i;
+ irq_handler = octeon_cf_interrupt;
+ }
}
of_node_put(dma_node);
}
--
2.30.2
From: Hannu Hartikainen <[email protected]>
commit 4897807753e078655a78de39ed76044d784f3e63 upstream.
The device (32a7:0000 Heimann Sensor GmbH USB appset demo) claims to be
a CDC-ACM device in its descriptors but in fact is not. If it is run
with echo disabled it returns garbled data, probably due to something
that happens in the TTY layer. And when run with echo enabled (the
default), it will mess up the calibration data of the sensor the first
time any data is sent to the device.
In short, I had a bad time after connecting the sensor and trying to get
it to work. I hope blacklisting it in the cdc-acm driver will save
someone else a bit of trouble.
Signed-off-by: Hannu Hartikainen <[email protected]>
Cc: stable <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/class/cdc-acm.c | 5 +++++
1 file changed, 5 insertions(+)
--- a/drivers/usb/class/cdc-acm.c
+++ b/drivers/usb/class/cdc-acm.c
@@ -1939,6 +1939,11 @@ static const struct usb_device_id acm_id
.driver_info = IGNORE_DEVICE,
},
+ /* Exclude Heimann Sensor GmbH USB appset demo */
+ { USB_DEVICE(0x32a7, 0x0000),
+ .driver_info = IGNORE_DEVICE,
+ },
+
/* control interfaces without any protocol set */
{ USB_INTERFACE_INFO(USB_CLASS_COMM, USB_CDC_SUBCLASS_ACM,
USB_CDC_PROTO_NONE) },
From: Vineeth Vijayan <[email protected]>
commit c749d8c018daf5fba6dfac7b6c5c78b27efd7d65 upstream.
Currently css_wait_for_slow_path() gets called inside the chp->lock.
The path-verification-loop of slowpath inside this lock could lead to
deadlock as reported by the lockdep validator.
The ccw_device_get_chp_desc() during the instance of a device-set-online
would try to acquire the same 'chp->lock' to read the chp->desc.
The instance of this function can get called from multiple scenario,
like probing or setting-device online manually. This could, in some
corner-cases lead to the deadlock.
lockdep validator reported this as,
CPU0 CPU1
---- ----
lock(&chp->lock);
lock(kn->active#43);
lock(&chp->lock);
lock((wq_completion)cio);
The chp->lock was introduced to serialize the access of struct
channel_path. This lock is not needed for the css_wait_for_slow_path()
function, so invoke the slow-path function outside this lock.
Fixes: b730f3a93395 ("[S390] cio: add lock to struct channel_path")
Cc: <[email protected]>
Reviewed-by: Peter Oberparleiter <[email protected]>
Signed-off-by: Vineeth Vijayan <[email protected]>
Signed-off-by: Vasily Gorbik <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/s390/cio/chp.c | 3 +++
drivers/s390/cio/chsc.c | 2 --
2 files changed, 3 insertions(+), 2 deletions(-)
--- a/drivers/s390/cio/chp.c
+++ b/drivers/s390/cio/chp.c
@@ -257,6 +257,9 @@ static ssize_t chp_status_write(struct d
if (!num_args)
return count;
+ /* Wait until previous actions have settled. */
+ css_wait_for_slow_path();
+
if (!strncasecmp(cmd, "on", 2) || !strcmp(cmd, "1")) {
mutex_lock(&cp->lock);
error = s390_vary_chpid(cp->chpid, 1);
--- a/drivers/s390/cio/chsc.c
+++ b/drivers/s390/cio/chsc.c
@@ -769,8 +769,6 @@ int chsc_chp_vary(struct chp_id chpid, i
{
struct channel_path *chp = chpid_to_chp(chpid);
- /* Wait until previous actions have settled. */
- css_wait_for_slow_path();
/*
* Redo PathVerification on the devices the chpid connects to
*/
From: Mirko Vogt <mirko-dev|[email protected]>
[ Upstream commit 0d7993b234c9fad8cb6bec6adfaa74694ba85ecb ]
The current sun6i SPI implementation initializes the transfer too early,
resulting in SCK going high before the transfer. When using an additional
(gpio) chipselect with sun6i, the chipselect is asserted at a time when
clock is high, making the SPI transfer fail.
This is due to SUN6I_GBL_CTL_BUS_ENABLE being written into
SUN6I_GBL_CTL_REG at an early stage. Moving that to the transfer
function, hence, right before the transfer starts, mitigates that
problem.
Fixes: 3558fe900e8af (spi: sunxi: Add Allwinner A31 SPI controller driver)
Signed-off-by: Mirko Vogt <mirko-dev|[email protected]>
Signed-off-by: Ralf Schlatterbeck <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/spi/spi-sun6i.c | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
diff --git a/drivers/spi/spi-sun6i.c b/drivers/spi/spi-sun6i.c
index 48888ab630c2..079bdc4e65ff 100644
--- a/drivers/spi/spi-sun6i.c
+++ b/drivers/spi/spi-sun6i.c
@@ -249,6 +249,10 @@ static int sun6i_spi_transfer_one(struct spi_master *master,
}
sun6i_spi_write(sspi, SUN6I_CLK_CTL_REG, reg);
+ /* Finally enable the bus - doing so before might raise SCK to HIGH */
+ reg = sun6i_spi_read(sspi, SUN6I_GBL_CTL_REG);
+ reg |= SUN6I_GBL_CTL_BUS_ENABLE;
+ sun6i_spi_write(sspi, SUN6I_GBL_CTL_REG, reg);
/* Setup the transfer now... */
if (sspi->tx_buf)
@@ -332,7 +336,7 @@ static int sun6i_spi_runtime_resume(struct device *dev)
}
sun6i_spi_write(sspi, SUN6I_GBL_CTL_REG,
- SUN6I_GBL_CTL_BUS_ENABLE | SUN6I_GBL_CTL_MASTER | SUN6I_GBL_CTL_TP);
+ SUN6I_GBL_CTL_MASTER | SUN6I_GBL_CTL_TP);
return 0;
--
2.30.2
From: Anirudh Rayabharam <[email protected]>
[ Upstream commit f8194e5e63fdcb349e8da9eef9e574d5b1d687cb ]
syzbot has reported the following warning in pvr2_i2c_done:
sysfs group 'power' not found for kobject '1-0043'
When the device is disconnected (pvr_hdw_disconnect), the i2c adapter is
not unregistered along with the USB and v4l2 teardown. As part of the USB
device disconnect, the sysfs files of the subdevices are also deleted.
So, by the time pvr_i2c_core_done is called by pvr_context_destroy, the
sysfs files have been deleted.
To fix this, unregister the i2c adapter too in pvr_hdw_disconnect. Make
the device deregistration code shared by calling pvr_hdw_disconnect from
pvr2_hdw_destroy.
Reported-by: [email protected]
Tested-by: [email protected]
Reviewed-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Anirudh Rayabharam <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/media/usb/pvrusb2/pvrusb2-hdw.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/media/usb/pvrusb2/pvrusb2-hdw.c b/drivers/media/usb/pvrusb2/pvrusb2-hdw.c
index 232b0fd3e478..ba3b0141538d 100644
--- a/drivers/media/usb/pvrusb2/pvrusb2-hdw.c
+++ b/drivers/media/usb/pvrusb2/pvrusb2-hdw.c
@@ -2731,9 +2731,8 @@ void pvr2_hdw_destroy(struct pvr2_hdw *hdw)
pvr2_stream_destroy(hdw->vid_stream);
hdw->vid_stream = NULL;
}
- pvr2_i2c_core_done(hdw);
v4l2_device_unregister(&hdw->v4l2_dev);
- pvr2_hdw_remove_usb_stuff(hdw);
+ pvr2_hdw_disconnect(hdw);
mutex_lock(&pvr2_unit_mtx);
do {
if ((hdw->unit_number >= 0) &&
@@ -2760,6 +2759,7 @@ void pvr2_hdw_disconnect(struct pvr2_hdw *hdw)
{
pvr2_trace(PVR2_TRACE_INIT,"pvr2_hdw_disconnect(hdw=%p)",hdw);
LOCK_TAKE(hdw->big_lock);
+ pvr2_i2c_core_done(hdw);
LOCK_TAKE(hdw->ctl_lock);
pvr2_hdw_remove_usb_stuff(hdw);
LOCK_GIVE(hdw->ctl_lock);
--
2.30.2
From: Arnd Bergmann <[email protected]>
[ Upstream commit c5f320ff8a79501bb59338278336ec43acb9d7e2 ]
gcc points out a mistake in the mca driver that goes back to before the
git history:
arch/ia64/kernel/mca_drv.c: In function 'init_record_index_pools':
arch/ia64/kernel/mca_drv.c:346:54: error: expression does not compute the number of elements in this array; element typ
e is 'int', not 'size_t' {aka 'long unsigned int'} [-Werror=sizeof-array-div]
346 | for (i = 1; i < sizeof sal_log_sect_min_sizes/sizeof(size_t); i++)
| ^
This is the same as sizeof(size_t), which is two shorter than the actual
array. Use the ARRAY_SIZE() macro to get the correct calculation instead.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnd Bergmann <[email protected]>
Cc: Masahiro Yamada <[email protected]>
Cc: Randy Dunlap <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/ia64/kernel/mca_drv.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/ia64/kernel/mca_drv.c b/arch/ia64/kernel/mca_drv.c
index 94f8bf777afa..3503d488e9b3 100644
--- a/arch/ia64/kernel/mca_drv.c
+++ b/arch/ia64/kernel/mca_drv.c
@@ -343,7 +343,7 @@ init_record_index_pools(void)
/* - 2 - */
sect_min_size = sal_log_sect_min_sizes[0];
- for (i = 1; i < sizeof sal_log_sect_min_sizes/sizeof(size_t); i++)
+ for (i = 1; i < ARRAY_SIZE(sal_log_sect_min_sizes); i++)
if (sect_min_size > sal_log_sect_min_sizes[i])
sect_min_size = sal_log_sect_min_sizes[i];
--
2.30.2
From: Alexander Aring <[email protected]>
[ Upstream commit c6aa00e3d20c2767ba3f57b64eb862572b9744b3 ]
These rx tx flags arguments are for signaling close_connection() from
which worker they are called. Obviously the receive worker cannot cancel
itself and vice versa for swork. For the othercon the receive worker
should only be used, however to avoid deadlocks we should pass the same
flags as the original close_connection() was called.
Signed-off-by: Alexander Aring <[email protected]>
Signed-off-by: David Teigland <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/dlm/lowcomms.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/fs/dlm/lowcomms.c b/fs/dlm/lowcomms.c
index 9d7a4a714907..99f4cd91910f 100644
--- a/fs/dlm/lowcomms.c
+++ b/fs/dlm/lowcomms.c
@@ -554,7 +554,7 @@ static void close_connection(struct connection *con, bool and_other,
}
if (con->othercon && and_other) {
/* Will only re-enter once. */
- close_connection(con->othercon, false, true, true);
+ close_connection(con->othercon, false, tx, rx);
}
if (con->rx_page) {
__free_page(con->rx_page);
--
2.30.2
From: Mario Limonciello <[email protected]>
[ Upstream commit 65ea8f2c6e230bdf71fed0137cf9e9d1b307db32 ]
Generally, the C-state latency is provided by the _CST method or
FADT, but some OEM platforms using AMD Picasso, Renoir, Van Gogh,
and Cezanne set the C2 latency greater than C3's which causes the
C2 state to be skipped.
That will block the core entering PC6, which prevents S0ix working
properly on Linux systems.
In other operating systems, the latency values are not validated and
this does not cause problems by skipping states.
To avoid this issue on Linux, detect when latencies are not an
arithmetic progression and sort them.
Link: https://gitlab.freedesktop.org/agd5f/linux/-/commit/026d186e4592c1ee9c1cb44295912d0294508725
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/1230#note_712174
Suggested-by: Prike Liang <[email protected]>
Suggested-by: Alex Deucher <[email protected]>
Signed-off-by: Mario Limonciello <[email protected]>
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/acpi/processor_idle.c | 40 +++++++++++++++++++++++++++++++++++
1 file changed, 40 insertions(+)
diff --git a/drivers/acpi/processor_idle.c b/drivers/acpi/processor_idle.c
index 175c86bee3a9..69fec2d3a1f5 100644
--- a/drivers/acpi/processor_idle.c
+++ b/drivers/acpi/processor_idle.c
@@ -28,6 +28,7 @@
#include <linux/acpi.h>
#include <linux/dmi.h>
#include <linux/sched.h> /* need_resched() */
+#include <linux/sort.h>
#include <linux/tick.h>
#include <linux/cpuidle.h>
#include <linux/syscore_ops.h>
@@ -572,10 +573,37 @@ static void acpi_processor_power_verify_c3(struct acpi_processor *pr,
return;
}
+static int acpi_cst_latency_cmp(const void *a, const void *b)
+{
+ const struct acpi_processor_cx *x = a, *y = b;
+
+ if (!(x->valid && y->valid))
+ return 0;
+ if (x->latency > y->latency)
+ return 1;
+ if (x->latency < y->latency)
+ return -1;
+ return 0;
+}
+static void acpi_cst_latency_swap(void *a, void *b, int n)
+{
+ struct acpi_processor_cx *x = a, *y = b;
+ u32 tmp;
+
+ if (!(x->valid && y->valid))
+ return;
+ tmp = x->latency;
+ x->latency = y->latency;
+ y->latency = tmp;
+}
+
static int acpi_processor_power_verify(struct acpi_processor *pr)
{
unsigned int i;
unsigned int working = 0;
+ unsigned int last_latency = 0;
+ unsigned int last_type = 0;
+ bool buggy_latency = false;
pr->power.timer_broadcast_on_state = INT_MAX;
@@ -599,12 +627,24 @@ static int acpi_processor_power_verify(struct acpi_processor *pr)
}
if (!cx->valid)
continue;
+ if (cx->type >= last_type && cx->latency < last_latency)
+ buggy_latency = true;
+ last_latency = cx->latency;
+ last_type = cx->type;
lapic_timer_check_state(i, pr, cx);
tsc_check_state(cx->type);
working++;
}
+ if (buggy_latency) {
+ pr_notice("FW issue: working around C-state latencies out of order\n");
+ sort(&pr->power.states[1], max_cstate,
+ sizeof(struct acpi_processor_cx),
+ acpi_cst_latency_cmp,
+ acpi_cst_latency_swap);
+ }
+
lapic_timer_propagate_broadcast(pr);
return (working);
--
2.30.2
From: Richard Fitzgerald <[email protected]>
[ Upstream commit d327ea15a305024ef0085252fa3657bbb1ce25f5 ]
sparse generates the following warning:
include/linux/prandom.h:114:45: sparse: sparse: cast truncates bits from
constant value
This is because the 64-bit seed value is manipulated and then placed in a
u32, causing an implicit cast and truncation. A forced cast to u32 doesn't
prevent this warning, which is reasonable because a typecast doesn't prove
that truncation was expected.
Logical-AND the value with 0xffffffff to make explicit that truncation to
32-bit is intended.
Reported-by: kernel test robot <[email protected]>
Signed-off-by: Richard Fitzgerald <[email protected]>
Reviewed-by: Petr Mladek <[email protected]>
Signed-off-by: Petr Mladek <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
include/linux/prandom.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/include/linux/prandom.h b/include/linux/prandom.h
index cc1e71334e53..e20339c78a84 100644
--- a/include/linux/prandom.h
+++ b/include/linux/prandom.h
@@ -93,7 +93,7 @@ static inline u32 __seed(u32 x, u32 m)
*/
static inline void prandom_seed_state(struct rnd_state *state, u64 seed)
{
- u32 i = (seed >> 32) ^ (seed << 10) ^ seed;
+ u32 i = ((seed >> 32) ^ (seed << 10) ^ seed) & 0xffffffffUL;
state->s1 = __seed(i, 2U);
state->s2 = __seed(i, 8U);
--
2.30.2
From: Zheyu Ma <[email protected]>
[ Upstream commit 45c8ddd06c4b729c56a6083ab311bfbd9643f4a6 ]
Before referencing 'host->data', the driver needs to check whether it is
null pointer, otherwise it will cause a null pointer reference.
This log reveals it:
[ 29.355199] BUG: kernel NULL pointer dereference, address:
0000000000000014
[ 29.357323] #PF: supervisor write access in kernel mode
[ 29.357706] #PF: error_code(0x0002) - not-present page
[ 29.358088] PGD 0 P4D 0
[ 29.358280] Oops: 0002 [#1] PREEMPT SMP PTI
[ 29.358595] CPU: 2 PID: 0 Comm: swapper/2 Not tainted 5.12.4-
g70e7f0549188-dirty #102
[ 29.359164] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009),
BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014
[ 29.359978] RIP: 0010:via_sdc_isr+0x21f/0x410
[ 29.360314] Code: ff ff e8 84 aa d0 fd 66 45 89 7e 28 66 41 f7 c4 00
10 75 56 e8 72 aa d0 fd 66 41 f7 c4 00 c0 74 10 e8 65 aa d0 fd 48 8b 43
18 <c7> 40 14 ac ff ff ff e8 55 aa d0 fd 48 89 df e8 ad fb ff ff e9 77
[ 29.361661] RSP: 0018:ffffc90000118e98 EFLAGS: 00010046
[ 29.362042] RAX: 0000000000000000 RBX: ffff888107d77880
RCX: 0000000000000000
[ 29.362564] RDX: 0000000000000000 RSI: ffffffff835d20bb
RDI: 00000000ffffffff
[ 29.363085] RBP: ffffc90000118ed8 R08: 0000000000000001
R09: 0000000000000001
[ 29.363604] R10: 0000000000000000 R11: 0000000000000001
R12: 0000000000008600
[ 29.364128] R13: ffff888107d779c8 R14: ffffc90009c00200
R15: 0000000000008000
[ 29.364651] FS: 0000000000000000(0000) GS:ffff88817bc80000(0000)
knlGS:0000000000000000
[ 29.365235] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 29.365655] CR2: 0000000000000014 CR3: 0000000005a2e000
CR4: 00000000000006e0
[ 29.366170] DR0: 0000000000000000 DR1: 0000000000000000
DR2: 0000000000000000
[ 29.366683] DR3: 0000000000000000 DR6: 00000000fffe0ff0
DR7: 0000000000000400
[ 29.367197] Call Trace:
[ 29.367381] <IRQ>
[ 29.367537] __handle_irq_event_percpu+0x53/0x3e0
[ 29.367916] handle_irq_event_percpu+0x35/0x90
[ 29.368247] handle_irq_event+0x39/0x60
[ 29.368632] handle_fasteoi_irq+0xc2/0x1d0
[ 29.368950] __common_interrupt+0x7f/0x150
[ 29.369254] common_interrupt+0xb4/0xd0
[ 29.369547] </IRQ>
[ 29.369708] asm_common_interrupt+0x1e/0x40
[ 29.370016] RIP: 0010:native_safe_halt+0x17/0x20
[ 29.370360] Code: 07 0f 00 2d db 80 43 00 f4 5d c3 0f 1f 84 00 00 00
00 00 8b 05 c2 37 e5 01 55 48 89 e5 85 c0 7e 07 0f 00 2d bb 80 43 00 fb
f4 <5d> c3 cc cc cc cc cc cc cc 55 48 89 e5 e8 67 53 ff ff 8b 0d f9 91
[ 29.371696] RSP: 0018:ffffc9000008fe90 EFLAGS: 00000246
[ 29.372079] RAX: 0000000000000000 RBX: 0000000000000002
RCX: 0000000000000000
[ 29.372595] RDX: 0000000000000000 RSI: ffffffff854f67a4
RDI: ffffffff85403406
[ 29.373122] RBP: ffffc9000008fe90 R08: 0000000000000001
R09: 0000000000000001
[ 29.373646] R10: 0000000000000000 R11: 0000000000000001
R12: ffffffff86009188
[ 29.374160] R13: 0000000000000000 R14: 0000000000000000
R15: ffff888100258000
[ 29.374690] default_idle+0x9/0x10
[ 29.374944] arch_cpu_idle+0xa/0x10
[ 29.375198] default_idle_call+0x6e/0x250
[ 29.375491] do_idle+0x1f0/0x2d0
[ 29.375740] cpu_startup_entry+0x18/0x20
[ 29.376034] start_secondary+0x11f/0x160
[ 29.376328] secondary_startup_64_no_verify+0xb0/0xbb
[ 29.376705] Modules linked in:
[ 29.376939] Dumping ftrace buffer:
[ 29.377187] (ftrace buffer empty)
[ 29.377460] CR2: 0000000000000014
[ 29.377712] ---[ end trace 51a473dffb618c47 ]---
[ 29.378056] RIP: 0010:via_sdc_isr+0x21f/0x410
[ 29.378380] Code: ff ff e8 84 aa d0 fd 66 45 89 7e 28 66 41 f7 c4 00
10 75 56 e8 72 aa d0 fd 66 41 f7 c4 00 c0 74 10 e8 65 aa d0 fd 48 8b 43
18 <c7> 40 14 ac ff ff ff e8 55 aa d0 fd 48 89 df e8 ad fb ff ff e9 77
[ 29.379714] RSP: 0018:ffffc90000118e98 EFLAGS: 00010046
[ 29.380098] RAX: 0000000000000000 RBX: ffff888107d77880
RCX: 0000000000000000
[ 29.380614] RDX: 0000000000000000 RSI: ffffffff835d20bb
RDI: 00000000ffffffff
[ 29.381134] RBP: ffffc90000118ed8 R08: 0000000000000001
R09: 0000000000000001
[ 29.381653] R10: 0000000000000000 R11: 0000000000000001
R12: 0000000000008600
[ 29.382176] R13: ffff888107d779c8 R14: ffffc90009c00200
R15: 0000000000008000
[ 29.382697] FS: 0000000000000000(0000) GS:ffff88817bc80000(0000)
knlGS:0000000000000000
[ 29.383277] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 29.383697] CR2: 0000000000000014 CR3: 0000000005a2e000
CR4: 00000000000006e0
[ 29.384223] DR0: 0000000000000000 DR1: 0000000000000000
DR2: 0000000000000000
[ 29.384736] DR3: 0000000000000000 DR6: 00000000fffe0ff0
DR7: 0000000000000400
[ 29.385260] Kernel panic - not syncing: Fatal exception in interrupt
[ 29.385882] Dumping ftrace buffer:
[ 29.386135] (ftrace buffer empty)
[ 29.386401] Kernel Offset: disabled
[ 29.386656] Rebooting in 1 seconds..
Signed-off-by: Zheyu Ma <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Ulf Hansson <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/mmc/host/via-sdmmc.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/mmc/host/via-sdmmc.c b/drivers/mmc/host/via-sdmmc.c
index b455e9cf95af..a3472127bea3 100644
--- a/drivers/mmc/host/via-sdmmc.c
+++ b/drivers/mmc/host/via-sdmmc.c
@@ -859,6 +859,9 @@ static void via_sdc_data_isr(struct via_crdr_mmc_host *host, u16 intmask)
{
BUG_ON(intmask == 0);
+ if (!host->data)
+ return;
+
if (intmask & VIA_CRDR_SDSTS_DT)
host->data->error = -ETIMEDOUT;
else if (intmask & (VIA_CRDR_SDSTS_RC | VIA_CRDR_SDSTS_WC))
--
2.30.2
From: Zhen Lei <[email protected]>
[ Upstream commit a6b1e7093f0a099571fc8836ab4a589633f956a8 ]
When the CSI bps per lane is not in the valid range, an appropriate error
code -EINVAL should be returned. However, we currently do not explicitly
assign this error code to 'ret'. As a result, 0 was incorrectly returned.
Fixes: 256148246852 ("[media] tc358743: support probe from device tree")
Reported-by: Hulk Robot <[email protected]>
Signed-off-by: Zhen Lei <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/media/i2c/tc358743.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/media/i2c/tc358743.c b/drivers/media/i2c/tc358743.c
index 1e95fdb61041..c3befb3f5dcd 100644
--- a/drivers/media/i2c/tc358743.c
+++ b/drivers/media/i2c/tc358743.c
@@ -1761,6 +1761,7 @@ static int tc358743_probe_of(struct tc358743_state *state)
bps_pr_lane = 2 * endpoint->link_frequencies[0];
if (bps_pr_lane < 62500000U || bps_pr_lane > 1000000000U) {
dev_err(dev, "unsupported bps per lane: %u bps\n", bps_pr_lane);
+ ret = -EINVAL;
goto disable_clk;
}
--
2.30.2
From: Pavel Skripkin <[email protected]>
[ Upstream commit 0de449d599594f5472e00267d651615c7f2c6c1d ]
As documented at drivers/base/platform.c for platform_get_irq:
* Gets an IRQ for a platform device and prints an error message if finding the
* IRQ fails. Device drivers should check the return value for errors so as to
* not pass a negative integer value to the request_irq() APIs.
So, the driver should check that platform_get_irq() return value
is _negative_, not that it's equal to zero, because -ENXIO (return
value from request_irq() if irq was not found) will
pass this check and it leads to passing negative irq to request_irq()
Fixes: 0dd077093636 ("NET: Add ezchip ethernet driver")
Signed-off-by: Pavel Skripkin <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/ezchip/nps_enet.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/ezchip/nps_enet.c b/drivers/net/ethernet/ezchip/nps_enet.c
index 73d2bc349b2f..2cb20d8e6bdf 100644
--- a/drivers/net/ethernet/ezchip/nps_enet.c
+++ b/drivers/net/ethernet/ezchip/nps_enet.c
@@ -586,7 +586,7 @@ static s32 nps_enet_probe(struct platform_device *pdev)
/* Get IRQ number */
priv->irq = platform_get_irq(pdev, 0);
- if (!priv->irq) {
+ if (priv->irq < 0) {
dev_err(dev, "failed to retrieve <irq Rx-Tx> value from device tree\n");
err = -ENODEV;
goto out_netdev;
--
2.30.2
From: Randy Dunlap <[email protected]>
[ Upstream commit 8edcb5049ac29aa3c8acc5ef15dd4036543d747e ]
The use of an enum named 'RST' conflicts with a #define macro
named 'RST' in arch/mips/include/asm/mach-rc32434/rb.h.
The MIPS use of RST was there first (AFAICT), so change the
media/i2c/ uses of RST to be named 'RSET'.
'git grep -w RSET' does not report any naming conflicts with the
new name.
This fixes multiple build errors:
arch/mips/include/asm/mach-rc32434/rb.h:15:14: error: expected identifier before '(' token
15 | #define RST (1 << 15)
| ^
drivers/media/i2c/s5c73m3/s5c73m3.h:356:2: note: in expansion of macro 'RST'
356 | RST,
| ^~~
../arch/mips/include/asm/mach-rc32434/rb.h:15:14: error: expected identifier before '(' token
15 | #define RST (1 << 15)
| ^
../drivers/media/i2c/s5k6aa.c:180:2: note: in expansion of macro 'RST'
180 | RST,
| ^~~
../arch/mips/include/asm/mach-rc32434/rb.h:15:14: error: expected identifier before '(' token
15 | #define RST (1 << 15)
| ^
../drivers/media/i2c/s5k5baf.c:238:2: note: in expansion of macro 'RST'
238 | RST,
| ^~~
and some others that I have trimmed.
Fixes: cac47f1822fc ("[media] V4L: Add S5C73M3 camera driver")
Fixes: 8b99312b7214 ("[media] Add v4l2 subdev driver for S5K4ECGX sensor")
Fixes: 7d459937dc09 ("[media] Add driver for Samsung S5K5BAF camera sensor")
Fixes: bfa8dd3a0524 ("[media] v4l: Add v4l2 subdev driver for S5K6AAFX sensor")
Signed-off-by: Randy Dunlap <[email protected]>
Reported-by: kernel test robot <[email protected]>
Cc: Shawn Guo <[email protected]>
Cc: Sascha Hauer <[email protected]>
Cc: Pengutronix Kernel Team <[email protected]>
Cc: Fabio Estevam <[email protected]>
Cc: NXP Linux Team <[email protected]>
Cc: [email protected] (moderated for non-subscribers)
Cc: Andrzej Hajda <[email protected]>
Cc: Sylwester Nawrocki <[email protected]>
Cc: Sangwook Lee <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/media/i2c/s5c73m3/s5c73m3-core.c | 6 +++---
drivers/media/i2c/s5c73m3/s5c73m3.h | 2 +-
drivers/media/i2c/s5k4ecgx.c | 10 +++++-----
drivers/media/i2c/s5k5baf.c | 6 +++---
drivers/media/i2c/s5k6aa.c | 10 +++++-----
5 files changed, 17 insertions(+), 17 deletions(-)
diff --git a/drivers/media/i2c/s5c73m3/s5c73m3-core.c b/drivers/media/i2c/s5c73m3/s5c73m3-core.c
index 51b26010403c..376ffa19555d 100644
--- a/drivers/media/i2c/s5c73m3/s5c73m3-core.c
+++ b/drivers/media/i2c/s5c73m3/s5c73m3-core.c
@@ -1393,7 +1393,7 @@ static int __s5c73m3_power_on(struct s5c73m3 *state)
s5c73m3_gpio_deassert(state, STBY);
usleep_range(100, 200);
- s5c73m3_gpio_deassert(state, RST);
+ s5c73m3_gpio_deassert(state, RSET);
usleep_range(50, 100);
return 0;
@@ -1408,7 +1408,7 @@ static int __s5c73m3_power_off(struct s5c73m3 *state)
{
int i, ret;
- if (s5c73m3_gpio_assert(state, RST))
+ if (s5c73m3_gpio_assert(state, RSET))
usleep_range(10, 50);
if (s5c73m3_gpio_assert(state, STBY))
@@ -1613,7 +1613,7 @@ static int s5c73m3_get_platform_data(struct s5c73m3 *state)
state->mclk_frequency = pdata->mclk_frequency;
state->gpio[STBY] = pdata->gpio_stby;
- state->gpio[RST] = pdata->gpio_reset;
+ state->gpio[RSET] = pdata->gpio_reset;
return 0;
}
diff --git a/drivers/media/i2c/s5c73m3/s5c73m3.h b/drivers/media/i2c/s5c73m3/s5c73m3.h
index 13aed59f0f5d..01f57055e20f 100644
--- a/drivers/media/i2c/s5c73m3/s5c73m3.h
+++ b/drivers/media/i2c/s5c73m3/s5c73m3.h
@@ -361,7 +361,7 @@ struct s5c73m3_ctrls {
enum s5c73m3_gpio_id {
STBY,
- RST,
+ RSET,
GPIO_NUM,
};
diff --git a/drivers/media/i2c/s5k4ecgx.c b/drivers/media/i2c/s5k4ecgx.c
index 97084237275d..4959edcb76cd 100644
--- a/drivers/media/i2c/s5k4ecgx.c
+++ b/drivers/media/i2c/s5k4ecgx.c
@@ -177,7 +177,7 @@ static const char * const s5k4ecgx_supply_names[] = {
enum s5k4ecgx_gpio_id {
STBY,
- RST,
+ RSET,
GPIO_NUM,
};
@@ -482,7 +482,7 @@ static int __s5k4ecgx_power_on(struct s5k4ecgx *priv)
if (s5k4ecgx_gpio_set_value(priv, STBY, priv->gpio[STBY].level))
usleep_range(30, 50);
- if (s5k4ecgx_gpio_set_value(priv, RST, priv->gpio[RST].level))
+ if (s5k4ecgx_gpio_set_value(priv, RSET, priv->gpio[RSET].level))
usleep_range(30, 50);
return 0;
@@ -490,7 +490,7 @@ static int __s5k4ecgx_power_on(struct s5k4ecgx *priv)
static int __s5k4ecgx_power_off(struct s5k4ecgx *priv)
{
- if (s5k4ecgx_gpio_set_value(priv, RST, !priv->gpio[RST].level))
+ if (s5k4ecgx_gpio_set_value(priv, RSET, !priv->gpio[RSET].level))
usleep_range(30, 50);
if (s5k4ecgx_gpio_set_value(priv, STBY, !priv->gpio[STBY].level))
@@ -878,7 +878,7 @@ static int s5k4ecgx_config_gpios(struct s5k4ecgx *priv,
int ret;
priv->gpio[STBY].gpio = -EINVAL;
- priv->gpio[RST].gpio = -EINVAL;
+ priv->gpio[RSET].gpio = -EINVAL;
ret = s5k4ecgx_config_gpio(gpio->gpio, gpio->level, "S5K4ECGX_STBY");
@@ -897,7 +897,7 @@ static int s5k4ecgx_config_gpios(struct s5k4ecgx *priv,
s5k4ecgx_free_gpios(priv);
return ret;
}
- priv->gpio[RST] = *gpio;
+ priv->gpio[RSET] = *gpio;
if (gpio_is_valid(gpio->gpio))
gpio_set_value(gpio->gpio, 0);
diff --git a/drivers/media/i2c/s5k5baf.c b/drivers/media/i2c/s5k5baf.c
index 774e0d0c94cb..a9052219a278 100644
--- a/drivers/media/i2c/s5k5baf.c
+++ b/drivers/media/i2c/s5k5baf.c
@@ -238,7 +238,7 @@ struct s5k5baf_gpio {
enum s5k5baf_gpio_id {
STBY,
- RST,
+ RSET,
NUM_GPIOS,
};
@@ -973,7 +973,7 @@ static int s5k5baf_power_on(struct s5k5baf *state)
s5k5baf_gpio_deassert(state, STBY);
usleep_range(50, 100);
- s5k5baf_gpio_deassert(state, RST);
+ s5k5baf_gpio_deassert(state, RSET);
return 0;
err_reg_dis:
@@ -991,7 +991,7 @@ static int s5k5baf_power_off(struct s5k5baf *state)
state->apply_cfg = 0;
state->apply_crop = 0;
- s5k5baf_gpio_assert(state, RST);
+ s5k5baf_gpio_assert(state, RSET);
s5k5baf_gpio_assert(state, STBY);
if (!IS_ERR(state->clock))
diff --git a/drivers/media/i2c/s5k6aa.c b/drivers/media/i2c/s5k6aa.c
index 5ac2babe123b..ca1c0568a561 100644
--- a/drivers/media/i2c/s5k6aa.c
+++ b/drivers/media/i2c/s5k6aa.c
@@ -181,7 +181,7 @@ static const char * const s5k6aa_supply_names[] = {
enum s5k6aa_gpio_id {
STBY,
- RST,
+ RSET,
GPIO_NUM,
};
@@ -845,7 +845,7 @@ static int __s5k6aa_power_on(struct s5k6aa *s5k6aa)
ret = s5k6aa->s_power(1);
usleep_range(4000, 4000);
- if (s5k6aa_gpio_deassert(s5k6aa, RST))
+ if (s5k6aa_gpio_deassert(s5k6aa, RSET))
msleep(20);
return ret;
@@ -855,7 +855,7 @@ static int __s5k6aa_power_off(struct s5k6aa *s5k6aa)
{
int ret;
- if (s5k6aa_gpio_assert(s5k6aa, RST))
+ if (s5k6aa_gpio_assert(s5k6aa, RSET))
usleep_range(100, 150);
if (s5k6aa->s_power) {
@@ -1514,7 +1514,7 @@ static int s5k6aa_configure_gpios(struct s5k6aa *s5k6aa,
int ret;
s5k6aa->gpio[STBY].gpio = -EINVAL;
- s5k6aa->gpio[RST].gpio = -EINVAL;
+ s5k6aa->gpio[RSET].gpio = -EINVAL;
gpio = &pdata->gpio_stby;
if (gpio_is_valid(gpio->gpio)) {
@@ -1537,7 +1537,7 @@ static int s5k6aa_configure_gpios(struct s5k6aa *s5k6aa,
if (ret < 0)
return ret;
- s5k6aa->gpio[RST] = *gpio;
+ s5k6aa->gpio[RSET] = *gpio;
}
return 0;
--
2.30.2
From: zhangyi (F) <[email protected]>
[ Upstream commit 12e0613715e1cf305fffafaf0e89d810d9a85cc0 ]
block_dump is an old debugging interface, one of it's functions is used
to print the information about who write which file on disk. If we
enable block_dump through /proc/sys/vm/block_dump and turn on debug log
level, we can gather information about write process name, target file
name and disk from kernel message. This feature is realized in
block_dump___mark_inode_dirty(), it print above information into kernel
message directly when marking inode dirty, so it is noisy and can easily
trigger log storm. At the same time, get the dentry refcount is also not
safe, we found it will lead to deadlock on ext4 file system with
data=journal mode.
After tracepoints has been introduced into the kernel, we got a
tracepoint in __mark_inode_dirty(), which is a better replacement of
block_dump___mark_inode_dirty(). The only downside is that it only trace
the inode number and not a file name, but it probably doesn't matter
because the original printed file name in block_dump is not accurate in
some cases, and we can still find it through the inode number and device
id. So this patch delete the dirting inode part of block_dump feature.
Signed-off-by: zhangyi (F) <[email protected]>
Reviewed-by: Jan Kara <[email protected]>
Reviewed-by: Christoph Hellwig <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jens Axboe <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/fs-writeback.c | 25 -------------------------
1 file changed, 25 deletions(-)
diff --git a/fs/fs-writeback.c b/fs/fs-writeback.c
index 7f068330edb6..958a1bd0b5fc 100644
--- a/fs/fs-writeback.c
+++ b/fs/fs-writeback.c
@@ -2040,28 +2040,6 @@ int dirtytime_interval_handler(struct ctl_table *table, int write,
return ret;
}
-static noinline void block_dump___mark_inode_dirty(struct inode *inode)
-{
- if (inode->i_ino || strcmp(inode->i_sb->s_id, "bdev")) {
- struct dentry *dentry;
- const char *name = "?";
-
- dentry = d_find_alias(inode);
- if (dentry) {
- spin_lock(&dentry->d_lock);
- name = (const char *) dentry->d_name.name;
- }
- printk(KERN_DEBUG
- "%s(%d): dirtied inode %lu (%s) on %s\n",
- current->comm, task_pid_nr(current), inode->i_ino,
- name, inode->i_sb->s_id);
- if (dentry) {
- spin_unlock(&dentry->d_lock);
- dput(dentry);
- }
- }
-}
-
/**
* __mark_inode_dirty - internal function
* @inode: inode to mark
@@ -2120,9 +2098,6 @@ void __mark_inode_dirty(struct inode *inode, int flags)
(dirtytime && (inode->i_state & I_DIRTY_INODE)))
return;
- if (unlikely(block_dump))
- block_dump___mark_inode_dirty(inode);
-
spin_lock(&inode->i_lock);
if (dirtytime && (inode->i_state & I_DIRTY_INODE))
goto out_unlock_inode;
--
2.30.2
From: Gustavo A. R. Silva <[email protected]>
[ Upstream commit 13dfead49db07225335d4f587a560a2210391a1a ]
Rename struct sms_msg_data4 to sms_msg_data5 and increase the size of
its msg_data array from 4 to 5 elements. Notice that at some point
the 5th element of msg_data is being accessed in function
smscore_load_firmware_family2():
1006 trigger_msg->msg_data[4] = 4; /* Task ID */
Also, there is no need for the object _trigger_msg_ of type struct
sms_msg_data *, when _msg_ can be used, directly. Notice that msg_data
in struct sms_msg_data is a one-element array, which causes multiple
out-of-bounds warnings when accessing beyond its first element
in function smscore_load_firmware_family2():
992 struct sms_msg_data *trigger_msg =
993 (struct sms_msg_data *) msg;
994
995 pr_debug("sending MSG_SMS_SWDOWNLOAD_TRIGGER_REQ\n");
996 SMS_INIT_MSG(&msg->x_msg_header,
997 MSG_SMS_SWDOWNLOAD_TRIGGER_REQ,
998 sizeof(struct sms_msg_hdr) +
999 sizeof(u32) * 5);
1000
1001 trigger_msg->msg_data[0] = firmware->start_address;
1002 /* Entry point */
1003 trigger_msg->msg_data[1] = 6; /* Priority */
1004 trigger_msg->msg_data[2] = 0x200; /* Stack size */
1005 trigger_msg->msg_data[3] = 0; /* Parameter */
1006 trigger_msg->msg_data[4] = 4; /* Task ID */
even when enough dynamic memory is allocated for _msg_:
929 /* PAGE_SIZE buffer shall be enough and dma aligned */
930 msg = kmalloc(PAGE_SIZE, GFP_KERNEL | coredev->gfp_buf_flags);
but as _msg_ is casted to (struct sms_msg_data *):
992 struct sms_msg_data *trigger_msg =
993 (struct sms_msg_data *) msg;
the out-of-bounds warnings are actually valid and should be addressed.
Fix this by declaring object _msg_ of type struct sms_msg_data5 *,
which contains a 5-elements array, instead of just 4. And use
_msg_ directly, instead of creating object trigger_msg.
This helps with the ongoing efforts to enable -Warray-bounds by fixing
the following warnings:
CC [M] drivers/media/common/siano/smscoreapi.o
drivers/media/common/siano/smscoreapi.c: In function ‘smscore_load_firmware_family2’:
drivers/media/common/siano/smscoreapi.c:1003:24: warning: array subscript 1 is above array bounds of ‘u32[1]’ {aka ‘unsigned int[1]’} [-Warray-bounds]
1003 | trigger_msg->msg_data[1] = 6; /* Priority */
| ~~~~~~~~~~~~~~~~~~~~~^~~
In file included from drivers/media/common/siano/smscoreapi.c:12:
drivers/media/common/siano/smscoreapi.h:619:6: note: while referencing ‘msg_data’
619 | u32 msg_data[1];
| ^~~~~~~~
drivers/media/common/siano/smscoreapi.c:1004:24: warning: array subscript 2 is above array bounds of ‘u32[1]’ {aka ‘unsigned int[1]’} [-Warray-bounds]
1004 | trigger_msg->msg_data[2] = 0x200; /* Stack size */
| ~~~~~~~~~~~~~~~~~~~~~^~~
In file included from drivers/media/common/siano/smscoreapi.c:12:
drivers/media/common/siano/smscoreapi.h:619:6: note: while referencing ‘msg_data’
619 | u32 msg_data[1];
| ^~~~~~~~
drivers/media/common/siano/smscoreapi.c:1005:24: warning: array subscript 3 is above array bounds of ‘u32[1]’ {aka ‘unsigned int[1]’} [-Warray-bounds]
1005 | trigger_msg->msg_data[3] = 0; /* Parameter */
| ~~~~~~~~~~~~~~~~~~~~~^~~
In file included from drivers/media/common/siano/smscoreapi.c:12:
drivers/media/common/siano/smscoreapi.h:619:6: note: while referencing ‘msg_data’
619 | u32 msg_data[1];
| ^~~~~~~~
drivers/media/common/siano/smscoreapi.c:1006:24: warning: array subscript 4 is above array bounds of ‘u32[1]’ {aka ‘unsigned int[1]’} [-Warray-bounds]
1006 | trigger_msg->msg_data[4] = 4; /* Task ID */
| ~~~~~~~~~~~~~~~~~~~~~^~~
In file included from drivers/media/common/siano/smscoreapi.c:12:
drivers/media/common/siano/smscoreapi.h:619:6: note: while referencing ‘msg_data’
619 | u32 msg_data[1];
| ^~~~~~~~
Fixes: 018b0c6f8acb ("[media] siano: make load firmware logic to work with newer firmwares")
Co-developed-by: Kees Cook <[email protected]>
Signed-off-by: Kees Cook <[email protected]>
Signed-off-by: Gustavo A. R. Silva <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/media/common/siano/smscoreapi.c | 22 +++++++++-------------
drivers/media/common/siano/smscoreapi.h | 4 ++--
2 files changed, 11 insertions(+), 15 deletions(-)
diff --git a/drivers/media/common/siano/smscoreapi.c b/drivers/media/common/siano/smscoreapi.c
index 2a8d9a36d6f0..5cc68144771c 100644
--- a/drivers/media/common/siano/smscoreapi.c
+++ b/drivers/media/common/siano/smscoreapi.c
@@ -914,7 +914,7 @@ static int smscore_load_firmware_family2(struct smscore_device_t *coredev,
void *buffer, size_t size)
{
struct sms_firmware *firmware = (struct sms_firmware *) buffer;
- struct sms_msg_data4 *msg;
+ struct sms_msg_data5 *msg;
u32 mem_address, calc_checksum = 0;
u32 i, *ptr;
u8 *payload = firmware->payload;
@@ -995,24 +995,20 @@ static int smscore_load_firmware_family2(struct smscore_device_t *coredev,
goto exit_fw_download;
if (coredev->mode == DEVICE_MODE_NONE) {
- struct sms_msg_data *trigger_msg =
- (struct sms_msg_data *) msg;
-
pr_debug("sending MSG_SMS_SWDOWNLOAD_TRIGGER_REQ\n");
SMS_INIT_MSG(&msg->x_msg_header,
MSG_SMS_SWDOWNLOAD_TRIGGER_REQ,
- sizeof(struct sms_msg_hdr) +
- sizeof(u32) * 5);
+ sizeof(*msg));
- trigger_msg->msg_data[0] = firmware->start_address;
+ msg->msg_data[0] = firmware->start_address;
/* Entry point */
- trigger_msg->msg_data[1] = 6; /* Priority */
- trigger_msg->msg_data[2] = 0x200; /* Stack size */
- trigger_msg->msg_data[3] = 0; /* Parameter */
- trigger_msg->msg_data[4] = 4; /* Task ID */
+ msg->msg_data[1] = 6; /* Priority */
+ msg->msg_data[2] = 0x200; /* Stack size */
+ msg->msg_data[3] = 0; /* Parameter */
+ msg->msg_data[4] = 4; /* Task ID */
- rc = smscore_sendrequest_and_wait(coredev, trigger_msg,
- trigger_msg->x_msg_header.msg_length,
+ rc = smscore_sendrequest_and_wait(coredev, msg,
+ msg->x_msg_header.msg_length,
&coredev->trigger_done);
} else {
SMS_INIT_MSG(&msg->x_msg_header, MSG_SW_RELOAD_EXEC_REQ,
diff --git a/drivers/media/common/siano/smscoreapi.h b/drivers/media/common/siano/smscoreapi.h
index 4cc39e4a8318..55d02c27f124 100644
--- a/drivers/media/common/siano/smscoreapi.h
+++ b/drivers/media/common/siano/smscoreapi.h
@@ -636,9 +636,9 @@ struct sms_msg_data2 {
u32 msg_data[2];
};
-struct sms_msg_data4 {
+struct sms_msg_data5 {
struct sms_msg_hdr x_msg_header;
- u32 msg_data[4];
+ u32 msg_data[5];
};
struct sms_data_download {
--
2.30.2
From: Krzysztof Wilczyński <[email protected]>
[ Upstream commit 888be6067b97132c3992866bbcf647572253ab3f ]
Currently, a device description can be obtained using ACPI, if the _STR
method exists for a particular device, and then exposed to the userspace
via a sysfs object as a string value.
If the _STR method is available for a given device then the data
(usually a Unicode string) is read and stored in a buffer (of the
ACPI_TYPE_BUFFER type) with a pointer to said buffer cached in the
struct acpi_device_pnp for later access.
The description_show() function is responsible for exposing the device
description to the userspace via a corresponding sysfs object and
internally calls the utf16s_to_utf8s() function with a pointer to the
buffer that contains the Unicode string so that it can be converted from
UTF16 encoding to UTF8 and thus allowing for the value to be safely
stored and later displayed.
When invoking the utf16s_to_utf8s() function, the description_show()
function also sets a limit of the data that can be saved into a provided
buffer as a result of the character conversion to be a total of
PAGE_SIZE, and upon completion, the utf16s_to_utf8s() function returns
an integer value denoting the number of bytes that have been written
into the provided buffer.
Following the execution of the utf16s_to_utf8s() a newline character
will be added at the end of the resulting buffer so that when the value
is read in the userspace through the sysfs object then it would include
newline making it more accessible when working with the sysfs file
system in the shell, etc. Normally, this wouldn't be a problem, but if
the function utf16s_to_utf8s() happens to return the number of bytes
written to be precisely PAGE_SIZE, then we would overrun the buffer and
write the newline character outside the allotted space which can have
undefined consequences or result in a failure.
To fix this buffer overrun, ensure that there always is enough space
left for the newline character to be safely appended.
Fixes: d1efe3c324ea ("ACPI: Add new sysfs interface to export device description")
Signed-off-by: Krzysztof Wilczyński <[email protected]>
Reviewed-by: Bjorn Helgaas <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/acpi/device_sysfs.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/acpi/device_sysfs.c b/drivers/acpi/device_sysfs.c
index 139ee989b0d0..c201aaf287dc 100644
--- a/drivers/acpi/device_sysfs.c
+++ b/drivers/acpi/device_sysfs.c
@@ -450,7 +450,7 @@ static ssize_t description_show(struct device *dev,
(wchar_t *)acpi_dev->pnp.str_obj->buffer.pointer,
acpi_dev->pnp.str_obj->buffer.length,
UTF16_LITTLE_ENDIAN, buf,
- PAGE_SIZE);
+ PAGE_SIZE - 1);
buf[result++] = '\n';
--
2.30.2
From: Randy Dunlap <[email protected]>
[ Upstream commit 5d3516b3647621d5a1180672ea9e0817fb718ada ]
APPLDATA_BASE should depend on PROC_SYSCTL instead of PROC_FS.
Building with PROC_FS but not PROC_SYSCTL causes a build error,
since appldata_base.c uses data and APIs from fs/proc/proc_sysctl.c.
arch/s390/appldata/appldata_base.o: in function `appldata_generic_handler':
appldata_base.c:(.text+0x192): undefined reference to `sysctl_vals'
Fixes: c185b783b099 ("[S390] Remove config options.")
Signed-off-by: Randy Dunlap <[email protected]>
Cc: Heiko Carstens <[email protected]>
Cc: Vasily Gorbik <[email protected]>
Cc: Christian Borntraeger <[email protected]>
Cc: [email protected]
Signed-off-by: Vasily Gorbik <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Vasily Gorbik <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/s390/Kconfig | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig
index 9bdaeb38a768..7466e034e1fc 100644
--- a/arch/s390/Kconfig
+++ b/arch/s390/Kconfig
@@ -834,7 +834,7 @@ config CMM_IUCV
config APPLDATA_BASE
def_bool n
prompt "Linux - VM Monitor Stream, base infrastructure"
- depends on PROC_FS
+ depends on PROC_SYSCTL
help
This provides a kernel interface for creating and updating z/VM APPLDATA
monitor records. The monitor records are updated at certain time
--
2.30.2
From: Pavel Skripkin <[email protected]>
[ Upstream commit e3a5de6d81d8b2199935c7eb3f7d17a50a7075b7 ]
static int greth_of_remove(struct platform_device *of_dev)
{
...
struct greth_private *greth = netdev_priv(ndev);
...
unregister_netdev(ndev);
free_netdev(ndev);
of_iounmap(&of_dev->resource[0], greth->regs, resource_size(&of_dev->resource[0]));
...
}
greth is netdev private data, but it is used
after free_netdev(). It can cause use-after-free when accessing greth
pointer. So, fix it by moving free_netdev() after of_iounmap()
call.
Fixes: d4c41139df6e ("net: Add Aeroflex Gaisler 10/100/1G Ethernet MAC driver")
Signed-off-by: Pavel Skripkin <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/aeroflex/greth.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/aeroflex/greth.c b/drivers/net/ethernet/aeroflex/greth.c
index 20bf55dbd76f..e3ca8abb14f4 100644
--- a/drivers/net/ethernet/aeroflex/greth.c
+++ b/drivers/net/ethernet/aeroflex/greth.c
@@ -1579,10 +1579,11 @@ static int greth_of_remove(struct platform_device *of_dev)
mdiobus_unregister(greth->mdio);
unregister_netdev(ndev);
- free_netdev(ndev);
of_iounmap(&of_dev->resource[0], greth->regs, resource_size(&of_dev->resource[0]));
+ free_netdev(ndev);
+
return 0;
}
--
2.30.2
From: Dan Carpenter <[email protected]>
[ Upstream commit 4a36e160856db8a8ddd6a3d2e5db5a850ab87f82 ]
There needs to be a check to verify that we don't read beyond the end
of "buf". This function is called from do_rx(). The "buf" is the USB
transfer_buffer and "len" is "urb->actual_length".
Fixes: 61e121047645 ("staging: gdm7240: adding LTE USB driver")
Signed-off-by: Dan Carpenter <[email protected]>
Link: https://lore.kernel.org/r/YMcnl4zCwGWGDVMG@mwanda
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/staging/gdm724x/gdm_lte.c | 10 +++++++++-
1 file changed, 9 insertions(+), 1 deletion(-)
diff --git a/drivers/staging/gdm724x/gdm_lte.c b/drivers/staging/gdm724x/gdm_lte.c
index 79de678807cc..1eacf82d1bd0 100644
--- a/drivers/staging/gdm724x/gdm_lte.c
+++ b/drivers/staging/gdm724x/gdm_lte.c
@@ -689,6 +689,7 @@ static void gdm_lte_multi_sdu_pkt(struct phy_dev *phy_dev, char *buf, int len)
struct multi_sdu *multi_sdu = (struct multi_sdu *)buf;
struct sdu *sdu = NULL;
u8 *data = (u8 *)multi_sdu->data;
+ int copied;
u16 i = 0;
u16 num_packet;
u16 hci_len;
@@ -702,6 +703,12 @@ static void gdm_lte_multi_sdu_pkt(struct phy_dev *phy_dev, char *buf, int len)
multi_sdu->num_packet);
for (i = 0; i < num_packet; i++) {
+ copied = data - multi_sdu->data;
+ if (len < copied + sizeof(*sdu)) {
+ pr_err("rx prevent buffer overflow");
+ return;
+ }
+
sdu = (struct sdu *)data;
cmd_evt = gdm_dev16_to_cpu(phy_dev->
@@ -715,7 +722,8 @@ static void gdm_lte_multi_sdu_pkt(struct phy_dev *phy_dev, char *buf, int len)
pr_err("rx sdu wrong hci %04x\n", cmd_evt);
return;
}
- if (hci_len < 12) {
+ if (hci_len < 12 ||
+ len < copied + sizeof(*sdu) + (hci_len - 12)) {
pr_err("rx sdu invalid len %d\n", hci_len);
return;
}
--
2.30.2
From: Pablo Neira Ayuso <[email protected]>
[ Upstream commit cdd73cc545c0fb9b1a1f7b209f4f536e7990cff4 ]
ipv6_find_hdr() does not validate that this is an IPv6 packet. Add a
sanity check for calling ipv6_find_hdr() to make sure an IPv6 packet
is passed for parsing.
Fixes: 96518518cc41 ("netfilter: add nftables")
Signed-off-by: Pablo Neira Ayuso <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/netfilter/nft_exthdr.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/net/netfilter/nft_exthdr.c b/net/netfilter/nft_exthdr.c
index ba7aed13e174..a81f6bf42d1f 100644
--- a/net/netfilter/nft_exthdr.c
+++ b/net/netfilter/nft_exthdr.c
@@ -34,6 +34,9 @@ static void nft_exthdr_eval(const struct nft_expr *expr,
unsigned int offset = 0;
int err;
+ if (pkt->skb->protocol != htons(ETH_P_IPV6))
+ goto err;
+
err = ipv6_find_hdr(pkt->skb, &offset, priv->type, NULL, NULL);
if (err < 0)
goto err;
--
2.30.2
From: Yang Li <[email protected]>
[ Upstream commit e9ca70c735ce66fc6a0e02c8b6958434f74ef8de ]
When the code execute this if statement, the value of ret is 0.
However, we can see from the ath10k_warn() log that the value of
ret should be -EINVAL.
Clean up smatch warning:
drivers/net/wireless/ath/ath10k/mac.c:5596 ath10k_add_interface() warn:
missing error code 'ret'
Reported-by: Abaci Robot <[email protected]>
Fixes: ccec9038c721 ("ath10k: enable raw encap mode and software crypto engine")
Signed-off-by: Yang Li <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/ath/ath10k/mac.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
index 5fad38c3feb1..7993ca956ede 100644
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -4450,6 +4450,7 @@ static int ath10k_add_interface(struct ieee80211_hw *hw,
if (arvif->nohwcrypt &&
!test_bit(ATH10K_FLAG_RAW_MODE, &ar->dev_flags)) {
+ ret = -EINVAL;
ath10k_warn(ar, "cryptmode module param needed for sw crypto\n");
goto err;
}
--
2.30.2
From: Christophe JAILLET <[email protected]>
[ Upstream commit 9a25344d5177c2b9285532236dc3d10a091f39a8 ]
If 'brcms_attach()' fails, we must undo the previous 'ieee80211_alloc_hw()'
as already done in the remove function.
Fixes: 5b435de0d786 ("net: wireless: add brcm80211 drivers")
Signed-off-by: Christophe JAILLET <[email protected]>
Acked-by: Arend van Spriel <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/8fbc171a1a493b38db5a6f0873c6021fca026a6c.1620852921.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c | 8 +++++++-
1 file changed, 7 insertions(+), 1 deletion(-)
diff --git a/drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c b/drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c
index a4e1eec96c60..e3a500fb4e3c 100644
--- a/drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c
+++ b/drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c
@@ -1221,6 +1221,7 @@ static int brcms_bcma_probe(struct bcma_device *pdev)
{
struct brcms_info *wl;
struct ieee80211_hw *hw;
+ int ret;
dev_info(&pdev->dev, "mfg %x core %x rev %d class %d irq %d\n",
pdev->id.manuf, pdev->id.id, pdev->id.rev, pdev->id.class,
@@ -1245,11 +1246,16 @@ static int brcms_bcma_probe(struct bcma_device *pdev)
wl = brcms_attach(pdev);
if (!wl) {
pr_err("%s: brcms_attach failed!\n", __func__);
- return -ENODEV;
+ ret = -ENODEV;
+ goto err_free_ieee80211;
}
brcms_led_register(wl);
return 0;
+
+err_free_ieee80211:
+ ieee80211_free_hw(hw);
+ return ret;
}
static int brcms_suspend(struct bcma_device *pdev)
--
2.30.2
From: Linyu Yuan <[email protected]>
commit 4249d6fbc10fd997abdf8a1ea49c0389a0edf706 upstream.
when receive eem echo command, it will send a response,
but queue this response to the usb request which allocate
from gadget device endpoint zero,
and transmit the request to IN endpoint of eem interface.
on dwc3 gadget, it will trigger following warning in function
__dwc3_gadget_ep_queue(),
if (WARN(req->dep != dep, "request %pK belongs to '%s'\n",
&req->request, req->dep->name))
return -EINVAL;
fix it by allocating a usb request from IN endpoint of eem interface,
and transmit the usb request to same IN endpoint of eem interface.
Signed-off-by: Linyu Yuan <[email protected]>
Cc: stable <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/gadget/function/f_eem.c | 43 ++++++++++++++++++++++++++++++++----
1 file changed, 39 insertions(+), 4 deletions(-)
--- a/drivers/usb/gadget/function/f_eem.c
+++ b/drivers/usb/gadget/function/f_eem.c
@@ -34,6 +34,11 @@ struct f_eem {
u8 ctrl_id;
};
+struct in_context {
+ struct sk_buff *skb;
+ struct usb_ep *ep;
+};
+
static inline struct f_eem *func_to_eem(struct usb_function *f)
{
return container_of(f, struct f_eem, port.func);
@@ -327,9 +332,12 @@ fail:
static void eem_cmd_complete(struct usb_ep *ep, struct usb_request *req)
{
- struct sk_buff *skb = (struct sk_buff *)req->context;
+ struct in_context *ctx = req->context;
- dev_kfree_skb_any(skb);
+ dev_kfree_skb_any(ctx->skb);
+ kfree(req->buf);
+ usb_ep_free_request(ctx->ep, req);
+ kfree(ctx);
}
/*
@@ -413,7 +421,9 @@ static int eem_unwrap(struct gether *por
* b15: bmType (0 == data, 1 == command)
*/
if (header & BIT(15)) {
- struct usb_request *req = cdev->req;
+ struct usb_request *req;
+ struct in_context *ctx;
+ struct usb_ep *ep;
u16 bmEEMCmd;
/* EEM command packet format:
@@ -442,11 +452,36 @@ static int eem_unwrap(struct gether *por
skb_trim(skb2, len);
put_unaligned_le16(BIT(15) | BIT(11) | len,
skb_push(skb2, 2));
+
+ ep = port->in_ep;
+ req = usb_ep_alloc_request(ep, GFP_ATOMIC);
+ if (!req) {
+ dev_kfree_skb_any(skb2);
+ goto next;
+ }
+
+ req->buf = kmalloc(skb2->len, GFP_KERNEL);
+ if (!req->buf) {
+ usb_ep_free_request(ep, req);
+ dev_kfree_skb_any(skb2);
+ goto next;
+ }
+
+ ctx = kmalloc(sizeof(*ctx), GFP_KERNEL);
+ if (!ctx) {
+ kfree(req->buf);
+ usb_ep_free_request(ep, req);
+ dev_kfree_skb_any(skb2);
+ goto next;
+ }
+ ctx->skb = skb2;
+ ctx->ep = ep;
+
skb_copy_bits(skb2, 0, req->buf, skb2->len);
req->length = skb2->len;
req->complete = eem_cmd_complete;
req->zero = 1;
- req->context = skb2;
+ req->context = ctx;
if (usb_ep_queue(port->in_ep, req, GFP_ATOMIC))
DBG(cdev, "echo response queue fail\n");
break;
From: Dan Carpenter <[email protected]>
[ Upstream commit 7002b526f4ff1f6da34356e67085caafa6be383a ]
This code assumes that "len" is at least 62 bytes, but we need a check
to prevent a read overflow.
Fixes: 61e121047645 ("staging: gdm7240: adding LTE USB driver")
Signed-off-by: Dan Carpenter <[email protected]>
Link: https://lore.kernel.org/r/YMcoTPsCYlhh2TQo@mwanda
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/staging/gdm724x/gdm_lte.c | 10 ++++++----
1 file changed, 6 insertions(+), 4 deletions(-)
diff --git a/drivers/staging/gdm724x/gdm_lte.c b/drivers/staging/gdm724x/gdm_lte.c
index 1eacf82d1bd0..8561f7fb53e9 100644
--- a/drivers/staging/gdm724x/gdm_lte.c
+++ b/drivers/staging/gdm724x/gdm_lte.c
@@ -624,10 +624,12 @@ static void gdm_lte_netif_rx(struct net_device *dev, char *buf,
* bytes (99,130,83,99 dec)
*/
} __packed;
- void *addr = buf + sizeof(struct iphdr) +
- sizeof(struct udphdr) +
- offsetof(struct dhcp_packet, chaddr);
- ether_addr_copy(nic->dest_mac_addr, addr);
+ int offset = sizeof(struct iphdr) +
+ sizeof(struct udphdr) +
+ offsetof(struct dhcp_packet, chaddr);
+ if (offset + ETH_ALEN > len)
+ return;
+ ether_addr_copy(nic->dest_mac_addr, buf + offset);
}
}
--
2.30.2
From: Jack Xu <[email protected]>
[ Upstream commit 96b57229209490c8bca4335b01a426a96173dc56 ]
Check the return code of the function qat_hal_rd_rel_reg() and return it
to the caller.
This is to fix the following warning when compiling the driver with
clang scan-build:
drivers/crypto/qat/qat_common/qat_hal.c:1436:2: warning: 6th function call argument is an uninitialized value
Signed-off-by: Jack Xu <[email protected]>
Co-developed-by: Zhehui Xiang <[email protected]>
Signed-off-by: Zhehui Xiang <[email protected]>
Reviewed-by: Giovanni Cabiddu <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/crypto/qat/qat_common/qat_hal.c | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
diff --git a/drivers/crypto/qat/qat_common/qat_hal.c b/drivers/crypto/qat/qat_common/qat_hal.c
index 380e761801a7..5e5003379281 100644
--- a/drivers/crypto/qat/qat_common/qat_hal.c
+++ b/drivers/crypto/qat/qat_common/qat_hal.c
@@ -1210,7 +1210,11 @@ static int qat_hal_put_rel_wr_xfer(struct icp_qat_fw_loader_handle *handle,
pr_err("QAT: bad xfrAddr=0x%x\n", xfr_addr);
return -EINVAL;
}
- qat_hal_rd_rel_reg(handle, ae, ctx, ICP_GPB_REL, gprnum, &gprval);
+ status = qat_hal_rd_rel_reg(handle, ae, ctx, ICP_GPB_REL, gprnum, &gprval);
+ if (status) {
+ pr_err("QAT: failed to read register");
+ return status;
+ }
gpr_addr = qat_hal_get_reg_addr(ICP_GPB_REL, gprnum);
data16low = 0xffff & data;
data16hi = 0xffff & (data >> 0x10);
--
2.30.2
From: Marek Szyprowski <[email protected]>
[ Upstream commit dc11fc2991e9efbceef93912b83e333d2835fb19 ]
The platform device driver name is "max8997-muic", so advertise it
properly in the modalias string. This fixes automated module loading when
this driver is compiled as a module.
Fixes: b76668ba8a77 ("Extcon: add MAX8997 extcon driver")
Signed-off-by: Marek Szyprowski <[email protected]>
Signed-off-by: Chanwoo Choi <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/extcon/extcon-max8997.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/extcon/extcon-max8997.c b/drivers/extcon/extcon-max8997.c
index 3d6b42f61f56..a37c7257ccc7 100644
--- a/drivers/extcon/extcon-max8997.c
+++ b/drivers/extcon/extcon-max8997.c
@@ -780,3 +780,4 @@ module_platform_driver(max8997_muic_driver);
MODULE_DESCRIPTION("Maxim MAX8997 Extcon driver");
MODULE_AUTHOR("Donggeun Kim <[email protected]>");
MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:max8997-muic");
--
2.30.2
From: Christophe JAILLET <[email protected]>
[ Upstream commit f7eedcb8539ddcbb6fe7791f1b4ccf43f905c72f ]
Add an error handling path in the probe to release some resources, as
already done in the remove function.
Fixes: 609adde838f4 ("phy: Add a driver for dm816x USB PHY")
Signed-off-by: Christophe JAILLET <[email protected]>
Link: https://lore.kernel.org/r/ac5136881f6bdec50be19b3bf73b3bc1b15ef1f1.1622898974.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Vinod Koul <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/phy/phy-dm816x-usb.c | 17 +++++++++++++----
1 file changed, 13 insertions(+), 4 deletions(-)
diff --git a/drivers/phy/phy-dm816x-usb.c b/drivers/phy/phy-dm816x-usb.c
index b4bbef664d20..908b5ff0e888 100644
--- a/drivers/phy/phy-dm816x-usb.c
+++ b/drivers/phy/phy-dm816x-usb.c
@@ -246,19 +246,28 @@ static int dm816x_usb_phy_probe(struct platform_device *pdev)
pm_runtime_enable(phy->dev);
generic_phy = devm_phy_create(phy->dev, NULL, &ops);
- if (IS_ERR(generic_phy))
- return PTR_ERR(generic_phy);
+ if (IS_ERR(generic_phy)) {
+ error = PTR_ERR(generic_phy);
+ goto clk_unprepare;
+ }
phy_set_drvdata(generic_phy, phy);
phy_provider = devm_of_phy_provider_register(phy->dev,
of_phy_simple_xlate);
- if (IS_ERR(phy_provider))
- return PTR_ERR(phy_provider);
+ if (IS_ERR(phy_provider)) {
+ error = PTR_ERR(phy_provider);
+ goto clk_unprepare;
+ }
usb_add_phy_dev(&phy->phy);
return 0;
+
+clk_unprepare:
+ pm_runtime_disable(phy->dev);
+ clk_unprepare(phy->refclk);
+ return error;
}
static int dm816x_usb_phy_remove(struct platform_device *pdev)
--
2.30.2
From: Christophe JAILLET <[email protected]>
[ Upstream commit 6ae7d0f5a92b9619f6e3c307ce56b2cefff3f0e9 ]
The error handling path is broken and we may un-register things that have
never been registered.
Update the loops index accordingly.
Fixes: 9842c38e9176 ("kfifo: fix warn_unused_result")
Suggested-by: Dan Carpenter <[email protected]>
Signed-off-by: Christophe JAILLET <[email protected]>
Link: https://lore.kernel.org/r/e28c2e92c7475da25b03d022ea2d6dcf1ba807a2.1621968629.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/tty/nozomi.c | 8 +++++---
1 file changed, 5 insertions(+), 3 deletions(-)
diff --git a/drivers/tty/nozomi.c b/drivers/tty/nozomi.c
index 880cfc780e67..1a3cc6ef4331 100644
--- a/drivers/tty/nozomi.c
+++ b/drivers/tty/nozomi.c
@@ -1437,7 +1437,7 @@ static int nozomi_card_init(struct pci_dev *pdev,
NOZOMI_NAME, dc);
if (unlikely(ret)) {
dev_err(&pdev->dev, "can't request irq %d\n", pdev->irq);
- goto err_free_kfifo;
+ goto err_free_all_kfifo;
}
DBG1("base_addr: %p", dc->base_addr);
@@ -1475,13 +1475,15 @@ static int nozomi_card_init(struct pci_dev *pdev,
return 0;
err_free_tty:
- for (i = 0; i < MAX_PORT; ++i) {
+ for (i--; i >= 0; i--) {
tty_unregister_device(ntty_driver, dc->index_start + i);
tty_port_destroy(&dc->port[i].port);
}
free_irq(pdev->irq, dc);
+err_free_all_kfifo:
+ i = MAX_PORT;
err_free_kfifo:
- for (i = 0; i < MAX_PORT; i++)
+ for (i--; i >= PORT_MDM; i--)
kfifo_free(&dc->port[i].fifo_ul);
err_free_sbuf:
kfree(dc->send_buf);
--
2.30.2
From: Zou Wei <[email protected]>
[ Upstream commit 34e7434ba4e97f4b85c1423a59b2922ba7dff2ea ]
This module's remove path calls del_timer(). However, that function
does not wait until the timer handler finishes. This means that the
timer handler may still be running after the driver's remove function
has finished, which would result in a use-after-free.
Fix by calling del_timer_sync(), which makes sure the timer handler
has finished, and unable to re-schedule itself.
Reported-by: Hulk Robot <[email protected]>
Signed-off-by: Zou Wei <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/atm/nicstar.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/atm/nicstar.c b/drivers/atm/nicstar.c
index 49da83f87170..486d7a114031 100644
--- a/drivers/atm/nicstar.c
+++ b/drivers/atm/nicstar.c
@@ -298,7 +298,7 @@ static void __exit nicstar_cleanup(void)
{
XPRINTK("nicstar: nicstar_cleanup() called.\n");
- del_timer(&ns_timer);
+ del_timer_sync(&ns_timer);
pci_unregister_driver(&nicstar_driver);
--
2.30.2
From: Hanjun Guo <[email protected]>
[ Upstream commit 4ac7a817f1992103d4e68e9837304f860b5e7300 ]
Although the system will not be in a good condition or it will not
boot if acpi_bus_init() fails, it is still necessary to put the
kobject in the error path before returning to avoid leaking memory.
Signed-off-by: Hanjun Guo <[email protected]>
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/acpi/bus.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/acpi/bus.c b/drivers/acpi/bus.c
index 521d1b28760c..d016eba51a95 100644
--- a/drivers/acpi/bus.c
+++ b/drivers/acpi/bus.c
@@ -1087,6 +1087,7 @@ static int __init acpi_init(void)
init_acpi_device_notify();
result = acpi_bus_init();
if (result) {
+ kobject_put(acpi_kobj);
disable_acpi();
return result;
}
--
2.30.2
From: Arturo Giusti <[email protected]>
[ Upstream commit fa236c2b2d4436d9f19ee4e5d5924e90ffd7bb43 ]
In function udf_symlink, epos.bh is assigned with the value returned
by udf_tgetblk. The function udf_tgetblk is defined in udf/misc.c
and returns the value of sb_getblk function that could be NULL.
Then, epos.bh is used without any check, causing a possible
NULL pointer dereference when sb_getblk fails.
This fix adds a check to validate the value of epos.bh.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=213083
Signed-off-by: Arturo Giusti <[email protected]>
Signed-off-by: Jan Kara <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/udf/namei.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/fs/udf/namei.c b/fs/udf/namei.c
index f34c545f4e54..074560ad190e 100644
--- a/fs/udf/namei.c
+++ b/fs/udf/namei.c
@@ -945,6 +945,10 @@ static int udf_symlink(struct inode *dir, struct dentry *dentry,
iinfo->i_location.partitionReferenceNum,
0);
epos.bh = udf_tgetblk(sb, block);
+ if (unlikely(!epos.bh)) {
+ err = -ENOMEM;
+ goto out_no_entry;
+ }
lock_buffer(epos.bh);
memset(epos.bh->b_data, 0x00, bsize);
set_buffer_uptodate(epos.bh);
--
2.30.2
From: Alexander Larkin <[email protected]>
commit f8f84af5da9ee04ef1d271528656dac42a090d00 upstream.
Even though we validate user-provided inputs we then traverse past
validated data when applying the new map. The issue was originally
discovered by Murray McAllister with this simple POC (if the following
is executed by an unprivileged user it will instantly panic the system):
int main(void) {
int fd, ret;
unsigned int buffer[10000];
fd = open("/dev/input/js0", O_RDONLY);
if (fd == -1)
printf("Error opening file\n");
ret = ioctl(fd, JSIOCSBTNMAP & ~IOCSIZE_MASK, &buffer);
printf("%d\n", ret);
}
The solution is to traverse internal buffer which is guaranteed to only
contain valid date when constructing the map.
Fixes: 182d679b2298 ("Input: joydev - prevent potential read overflow in ioctl")
Fixes: 999b874f4aa3 ("Input: joydev - validate axis/button maps before clobbering current ones")
Reported-by: Murray McAllister <[email protected]>
Suggested-by: Linus Torvalds <[email protected]>
Signed-off-by: Alexander Larkin <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Cc: [email protected]
Signed-off-by: Dmitry Torokhov <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/input/joydev.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/input/joydev.c
+++ b/drivers/input/joydev.c
@@ -492,7 +492,7 @@ static int joydev_handle_JSIOCSBTNMAP(st
memcpy(joydev->keypam, keypam, len);
for (i = 0; i < joydev->nkey; i++)
- joydev->keymap[keypam[i] - BTN_MISC] = i;
+ joydev->keymap[joydev->keypam[i] - BTN_MISC] = i;
out:
kfree(keypam);
From: Sebastian Andrzej Siewior <[email protected]>
[ Upstream commit 8380c81d5c4fced6f4397795a5ae65758272bbfd ]
__napi_schedule_irqoff() is an optimized version of __napi_schedule()
which can be used where it is known that interrupts are disabled,
e.g. in interrupt-handlers, spin_lock_irq() sections or hrtimer
callbacks.
On PREEMPT_RT enabled kernels this assumptions is not true. Force-
threaded interrupt handlers and spinlocks are not disabling interrupts
and the NAPI hrtimer callback is forced into softirq context which runs
with interrupts enabled as well.
Chasing all usage sites of __napi_schedule_irqoff() is a whack-a-mole
game so make __napi_schedule_irqoff() invoke __napi_schedule() for
PREEMPT_RT kernels.
The callers of ____napi_schedule() in the networking core have been
audited and are correct on PREEMPT_RT kernels as well.
Reported-by: Juri Lelli <[email protected]>
Signed-off-by: Sebastian Andrzej Siewior <[email protected]>
Reviewed-by: Thomas Gleixner <[email protected]>
Reviewed-by: Juri Lelli <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/core/dev.c | 11 +++++++++--
1 file changed, 9 insertions(+), 2 deletions(-)
diff --git a/net/core/dev.c b/net/core/dev.c
index 6fd356e72211..9a0c726bd124 100644
--- a/net/core/dev.c
+++ b/net/core/dev.c
@@ -4723,11 +4723,18 @@ EXPORT_SYMBOL(__napi_schedule);
* __napi_schedule_irqoff - schedule for receive
* @n: entry to schedule
*
- * Variant of __napi_schedule() assuming hard irqs are masked
+ * Variant of __napi_schedule() assuming hard irqs are masked.
+ *
+ * On PREEMPT_RT enabled kernels this maps to __napi_schedule()
+ * because the interrupt disabled assumption might not be true
+ * due to force-threaded interrupts and spinlock substitution.
*/
void __napi_schedule_irqoff(struct napi_struct *n)
{
- ____napi_schedule(this_cpu_ptr(&softnet_data), n);
+ if (!IS_ENABLED(CONFIG_PREEMPT_RT))
+ ____napi_schedule(this_cpu_ptr(&softnet_data), n);
+ else
+ __napi_schedule(n);
}
EXPORT_SYMBOL(__napi_schedule_irqoff);
--
2.30.2
From: Pavel Skripkin <[email protected]>
[ Upstream commit a149127be52fa7eaf5b3681a0317a2bbb772d5a9 ]
syzbot reported divide error in reiserfs.
The problem was in incorrect journal 1st block.
Syzbot's reproducer manualy generated wrong superblock
with incorrect 1st block. In journal_init() wasn't
any checks about this particular case.
For example, if 1st journal block is before superblock
1st block, it can cause zeroing important superblock members
in do_journal_end().
Link: https://lore.kernel.org/r/[email protected]
Reported-by: [email protected]
Signed-off-by: Pavel Skripkin <[email protected]>
Signed-off-by: Jan Kara <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/reiserfs/journal.c | 14 ++++++++++++++
1 file changed, 14 insertions(+)
diff --git a/fs/reiserfs/journal.c b/fs/reiserfs/journal.c
index 00985f9db9f7..6a0fa0cdc1ed 100644
--- a/fs/reiserfs/journal.c
+++ b/fs/reiserfs/journal.c
@@ -2770,6 +2770,20 @@ int journal_init(struct super_block *sb, const char *j_dev_name,
goto free_and_return;
}
+ /*
+ * Sanity check to see if journal first block is correct.
+ * If journal first block is invalid it can cause
+ * zeroing important superblock members.
+ */
+ if (!SB_ONDISK_JOURNAL_DEVICE(sb) &&
+ SB_ONDISK_JOURNAL_1st_BLOCK(sb) < SB_JOURNAL_1st_RESERVED_BLOCK(sb)) {
+ reiserfs_warning(sb, "journal-1393",
+ "journal 1st super block is invalid: 1st reserved block %d, but actual 1st block is %d",
+ SB_JOURNAL_1st_RESERVED_BLOCK(sb),
+ SB_ONDISK_JOURNAL_1st_BLOCK(sb));
+ goto free_and_return;
+ }
+
if (journal_init_dev(sb, journal, j_dev_name) != 0) {
reiserfs_warning(sb, "sh-462",
"unable to initialize journal device");
--
2.30.2
From: Zhen Lei <[email protected]>
[ Upstream commit b01360384009ab066940b45f34880991ea7ccbfb ]
Fix to return a negative error code from the error handling
case instead of 0, as done elsewhere in this function.
Fixes: 8a63b1994c50 ("crypto: ux500 - Add driver for HASH hardware")
Reported-by: Hulk Robot <[email protected]>
Signed-off-by: Zhen Lei <[email protected]>
Reviewed-by: Linus Walleij <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/crypto/ux500/hash/hash_core.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/crypto/ux500/hash/hash_core.c b/drivers/crypto/ux500/hash/hash_core.c
index bca6b701c067..7021b5b49c03 100644
--- a/drivers/crypto/ux500/hash/hash_core.c
+++ b/drivers/crypto/ux500/hash/hash_core.c
@@ -1022,6 +1022,7 @@ static int hash_hw_final(struct ahash_request *req)
goto out;
}
} else if (req->nbytes == 0 && ctx->keylen > 0) {
+ ret = -EPERM;
dev_err(device_data->dev, "%s: Empty message with keylength > 0, NOT supported\n",
__func__);
goto out;
--
2.30.2
From: Randy Dunlap <[email protected]>
[ Upstream commit 4d431153e751caa93f3b7e6f6313446974e92253 ]
The BusLogic driver has build errors on ia64 due to a name collision (in
the #included FlashPoint.c file). Rename the struct field in struct
sccb_mgr_info from si_flags to si_mflags (manager flags) to mend the build.
This is the first problem. There are 50+ others after this one:
In file included from ../include/uapi/linux/signal.h:6,
from ../include/linux/signal_types.h:10,
from ../include/linux/sched.h:29,
from ../include/linux/hardirq.h:9,
from ../include/linux/interrupt.h:11,
from ../drivers/scsi/BusLogic.c:27:
../arch/ia64/include/uapi/asm/siginfo.h:15:27: error: expected ':', ',', ';', '}' or '__attribute__' before '.' token
15 | #define si_flags _sifields._sigfault._flags
| ^
../drivers/scsi/FlashPoint.c:43:6: note: in expansion of macro 'si_flags'
43 | u16 si_flags;
| ^~~~~~~~
In file included from ../drivers/scsi/BusLogic.c:51:
../drivers/scsi/FlashPoint.c: In function 'FlashPoint_ProbeHostAdapter':
../drivers/scsi/FlashPoint.c:1076:11: error: 'struct sccb_mgr_info' has no member named '_sifields'
1076 | pCardInfo->si_flags = 0x0000;
| ^~
../drivers/scsi/FlashPoint.c:1079:12: error: 'struct sccb_mgr_info' has no member named '_sifields'
Link: https://lore.kernel.org/r/[email protected]
Fixes: 391e2f25601e ("[SCSI] BusLogic: Port driver to 64-bit.")
Cc: "James E.J. Bottomley" <[email protected]>
Cc: "Martin K. Petersen" <[email protected]>
Cc: Christoph Hellwig <[email protected]>
Cc: Jens Axboe <[email protected]>
Cc: Hannes Reinecke <[email protected]>
Cc: Khalid Aziz <[email protected]>
Cc: Khalid Aziz <[email protected]>
Reported-by: kernel test robot <[email protected]>
Reviewed-by: Hannes Reinecke <[email protected]>
Signed-off-by: Randy Dunlap <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/scsi/FlashPoint.c | 32 ++++++++++++++++----------------
1 file changed, 16 insertions(+), 16 deletions(-)
diff --git a/drivers/scsi/FlashPoint.c b/drivers/scsi/FlashPoint.c
index 867b864f5047..4bca37d52bad 100644
--- a/drivers/scsi/FlashPoint.c
+++ b/drivers/scsi/FlashPoint.c
@@ -40,7 +40,7 @@ struct sccb_mgr_info {
u16 si_per_targ_ultra_nego;
u16 si_per_targ_no_disc;
u16 si_per_targ_wide_nego;
- u16 si_flags;
+ u16 si_mflags;
unsigned char si_card_family;
unsigned char si_bustype;
unsigned char si_card_model[3];
@@ -1070,22 +1070,22 @@ static int FlashPoint_ProbeHostAdapter(struct sccb_mgr_info *pCardInfo)
ScamFlg =
(unsigned char)FPT_utilEERead(ioport, SCAM_CONFIG / 2);
- pCardInfo->si_flags = 0x0000;
+ pCardInfo->si_mflags = 0x0000;
if (i & 0x01)
- pCardInfo->si_flags |= SCSI_PARITY_ENA;
+ pCardInfo->si_mflags |= SCSI_PARITY_ENA;
if (!(i & 0x02))
- pCardInfo->si_flags |= SOFT_RESET;
+ pCardInfo->si_mflags |= SOFT_RESET;
if (i & 0x10)
- pCardInfo->si_flags |= EXTENDED_TRANSLATION;
+ pCardInfo->si_mflags |= EXTENDED_TRANSLATION;
if (ScamFlg & SCAM_ENABLED)
- pCardInfo->si_flags |= FLAG_SCAM_ENABLED;
+ pCardInfo->si_mflags |= FLAG_SCAM_ENABLED;
if (ScamFlg & SCAM_LEVEL2)
- pCardInfo->si_flags |= FLAG_SCAM_LEVEL2;
+ pCardInfo->si_mflags |= FLAG_SCAM_LEVEL2;
j = (RD_HARPOON(ioport + hp_bm_ctrl) & ~SCSI_TERM_ENA_L);
if (i & 0x04) {
@@ -1101,7 +1101,7 @@ static int FlashPoint_ProbeHostAdapter(struct sccb_mgr_info *pCardInfo)
if (!(RD_HARPOON(ioport + hp_page_ctrl) & NARROW_SCSI_CARD))
- pCardInfo->si_flags |= SUPPORT_16TAR_32LUN;
+ pCardInfo->si_mflags |= SUPPORT_16TAR_32LUN;
pCardInfo->si_card_family = HARPOON_FAMILY;
pCardInfo->si_bustype = BUSTYPE_PCI;
@@ -1137,15 +1137,15 @@ static int FlashPoint_ProbeHostAdapter(struct sccb_mgr_info *pCardInfo)
if (pCardInfo->si_card_model[1] == '3') {
if (RD_HARPOON(ioport + hp_ee_ctrl) & BIT(7))
- pCardInfo->si_flags |= LOW_BYTE_TERM;
+ pCardInfo->si_mflags |= LOW_BYTE_TERM;
} else if (pCardInfo->si_card_model[2] == '0') {
temp = RD_HARPOON(ioport + hp_xfer_pad);
WR_HARPOON(ioport + hp_xfer_pad, (temp & ~BIT(4)));
if (RD_HARPOON(ioport + hp_ee_ctrl) & BIT(7))
- pCardInfo->si_flags |= LOW_BYTE_TERM;
+ pCardInfo->si_mflags |= LOW_BYTE_TERM;
WR_HARPOON(ioport + hp_xfer_pad, (temp | BIT(4)));
if (RD_HARPOON(ioport + hp_ee_ctrl) & BIT(7))
- pCardInfo->si_flags |= HIGH_BYTE_TERM;
+ pCardInfo->si_mflags |= HIGH_BYTE_TERM;
WR_HARPOON(ioport + hp_xfer_pad, temp);
} else {
temp = RD_HARPOON(ioport + hp_ee_ctrl);
@@ -1163,9 +1163,9 @@ static int FlashPoint_ProbeHostAdapter(struct sccb_mgr_info *pCardInfo)
WR_HARPOON(ioport + hp_ee_ctrl, temp);
WR_HARPOON(ioport + hp_xfer_pad, temp2);
if (!(temp3 & BIT(7)))
- pCardInfo->si_flags |= LOW_BYTE_TERM;
+ pCardInfo->si_mflags |= LOW_BYTE_TERM;
if (!(temp3 & BIT(6)))
- pCardInfo->si_flags |= HIGH_BYTE_TERM;
+ pCardInfo->si_mflags |= HIGH_BYTE_TERM;
}
ARAM_ACCESS(ioport);
@@ -1272,7 +1272,7 @@ static void *FlashPoint_HardwareResetHostAdapter(struct sccb_mgr_info
WR_HARPOON(ioport + hp_arb_id, pCardInfo->si_id);
CurrCard->ourId = pCardInfo->si_id;
- i = (unsigned char)pCardInfo->si_flags;
+ i = (unsigned char)pCardInfo->si_mflags;
if (i & SCSI_PARITY_ENA)
WR_HARPOON(ioport + hp_portctrl_1, (HOST_MODE8 | CHK_SCSI_P));
@@ -1286,14 +1286,14 @@ static void *FlashPoint_HardwareResetHostAdapter(struct sccb_mgr_info
j |= SCSI_TERM_ENA_H;
WR_HARPOON(ioport + hp_ee_ctrl, j);
- if (!(pCardInfo->si_flags & SOFT_RESET)) {
+ if (!(pCardInfo->si_mflags & SOFT_RESET)) {
FPT_sresb(ioport, thisCard);
FPT_scini(thisCard, pCardInfo->si_id, 0);
}
- if (pCardInfo->si_flags & POST_ALL_UNDERRRUNS)
+ if (pCardInfo->si_mflags & POST_ALL_UNDERRRUNS)
CurrCard->globalFlags |= F_NO_FILTER;
if (pCurrNvRam) {
--
2.30.2
From: Willy Tarreau <[email protected]>
[ Upstream commit 62f20e068ccc50d6ab66fdb72ba90da2b9418c99 ]
This is a complement to commit aa6dd211e4b1 ("inet: use bigger hash
table for IP ID generation"), but focusing on some specific aspects
of IPv6.
Contary to IPv4, IPv6 only uses packet IDs with fragments, and with a
minimum MTU of 1280, it's much less easy to force a remote peer to
produce many fragments to explore its ID sequence. In addition packet
IDs are 32-bit in IPv6, which further complicates their analysis. On
the other hand, it is often easier to choose among plenty of possible
source addresses and partially work around the bigger hash table the
commit above permits, which leaves IPv6 partially exposed to some
possibilities of remote analysis at the risk of weakening some
protocols like DNS if some IDs can be predicted with a good enough
probability.
Given the wide range of permitted IDs, the risk of collision is extremely
low so there's no need to rely on the positive increment algorithm that
is shared with the IPv4 code via ip_idents_reserve(). We have a fast
PRNG, so let's simply call prandom_u32() and be done with it.
Performance measurements at 10 Gbps couldn't show any difference with
the previous code, even when using a single core, because due to the
large fragments, we're limited to only ~930 kpps at 10 Gbps and the cost
of the random generation is completely offset by other operations and by
the network transfer time. In addition, this change removes the need to
update a shared entry in the idents table so it may even end up being
slightly faster on large scale systems where this matters.
The risk of at least one collision here is about 1/80 million among
10 IDs, 1/850k among 100 IDs, and still only 1/8.5k among 1000 IDs,
which remains very low compared to IPv4 where all IDs are reused
every 4 to 80ms on a 10 Gbps flow depending on packet sizes.
Reported-by: Amit Klein <[email protected]>
Signed-off-by: Willy Tarreau <[email protected]>
Reviewed-by: Eric Dumazet <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/ipv6/output_core.c | 28 +++++-----------------------
1 file changed, 5 insertions(+), 23 deletions(-)
diff --git a/net/ipv6/output_core.c b/net/ipv6/output_core.c
index 6b896cc9604e..e2de4b0479f6 100644
--- a/net/ipv6/output_core.c
+++ b/net/ipv6/output_core.c
@@ -14,29 +14,11 @@ static u32 __ipv6_select_ident(struct net *net,
const struct in6_addr *dst,
const struct in6_addr *src)
{
- const struct {
- struct in6_addr dst;
- struct in6_addr src;
- } __aligned(SIPHASH_ALIGNMENT) combined = {
- .dst = *dst,
- .src = *src,
- };
- u32 hash, id;
-
- /* Note the following code is not safe, but this is okay. */
- if (unlikely(siphash_key_is_zero(&net->ipv4.ip_id_key)))
- get_random_bytes(&net->ipv4.ip_id_key,
- sizeof(net->ipv4.ip_id_key));
-
- hash = siphash(&combined, sizeof(combined), &net->ipv4.ip_id_key);
-
- /* Treat id of 0 as unset and if we get 0 back from ip_idents_reserve,
- * set the hight order instead thus minimizing possible future
- * collisions.
- */
- id = ip_idents_reserve(hash, 1);
- if (unlikely(!id))
- id = 1 << 31;
+ u32 id;
+
+ do {
+ id = prandom_u32();
+ } while (!id);
return id;
}
--
2.30.2
From: Liu Shixin <[email protected]>
[ Upstream commit b8f6b0522c298ae9267bd6584e19b942a0636910 ]
Hulk Robot reported memory leak in netlbl_mgmt_add_common.
The problem is non-freed map in case of netlbl_domhsh_add() failed.
BUG: memory leak
unreferenced object 0xffff888100ab7080 (size 96):
comm "syz-executor537", pid 360, jiffies 4294862456 (age 22.678s)
hex dump (first 32 bytes):
05 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
fe 00 00 00 00 00 00 00 00 00 00 00 00 00 00 01 ................
backtrace:
[<0000000008b40026>] netlbl_mgmt_add_common.isra.0+0xb2a/0x1b40
[<000000003be10950>] netlbl_mgmt_add+0x271/0x3c0
[<00000000c70487ed>] genl_family_rcv_msg_doit.isra.0+0x20e/0x320
[<000000001f2ff614>] genl_rcv_msg+0x2bf/0x4f0
[<0000000089045792>] netlink_rcv_skb+0x134/0x3d0
[<0000000020e96fdd>] genl_rcv+0x24/0x40
[<0000000042810c66>] netlink_unicast+0x4a0/0x6a0
[<000000002e1659f0>] netlink_sendmsg+0x789/0xc70
[<000000006e43415f>] sock_sendmsg+0x139/0x170
[<00000000680a73d7>] ____sys_sendmsg+0x658/0x7d0
[<0000000065cbb8af>] ___sys_sendmsg+0xf8/0x170
[<0000000019932b6c>] __sys_sendmsg+0xd3/0x190
[<00000000643ac172>] do_syscall_64+0x37/0x90
[<000000009b79d6dc>] entry_SYSCALL_64_after_hwframe+0x44/0xae
Fixes: 63c416887437 ("netlabel: Add network address selectors to the NetLabel/LSM domain mapping")
Reported-by: Hulk Robot <[email protected]>
Signed-off-by: Liu Shixin <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/netlabel/netlabel_mgmt.c | 19 ++++++++++---------
1 file changed, 10 insertions(+), 9 deletions(-)
diff --git a/net/netlabel/netlabel_mgmt.c b/net/netlabel/netlabel_mgmt.c
index 13f777f20995..5f1218dc9162 100644
--- a/net/netlabel/netlabel_mgmt.c
+++ b/net/netlabel/netlabel_mgmt.c
@@ -92,6 +92,7 @@ static const struct nla_policy netlbl_mgmt_genl_policy[NLBL_MGMT_A_MAX + 1] = {
static int netlbl_mgmt_add_common(struct genl_info *info,
struct netlbl_audit *audit_info)
{
+ void *pmap = NULL;
int ret_val = -EINVAL;
struct netlbl_domaddr_map *addrmap = NULL;
struct cipso_v4_doi *cipsov4 = NULL;
@@ -165,6 +166,7 @@ static int netlbl_mgmt_add_common(struct genl_info *info,
ret_val = -ENOMEM;
goto add_free_addrmap;
}
+ pmap = map;
map->list.addr = addr->s_addr & mask->s_addr;
map->list.mask = mask->s_addr;
map->list.valid = 1;
@@ -173,10 +175,8 @@ static int netlbl_mgmt_add_common(struct genl_info *info,
map->def.cipso = cipsov4;
ret_val = netlbl_af4list_add(&map->list, &addrmap->list4);
- if (ret_val != 0) {
- kfree(map);
- goto add_free_addrmap;
- }
+ if (ret_val != 0)
+ goto add_free_map;
entry->def.type = NETLBL_NLTYPE_ADDRSELECT;
entry->def.addrsel = addrmap;
@@ -212,6 +212,7 @@ static int netlbl_mgmt_add_common(struct genl_info *info,
ret_val = -ENOMEM;
goto add_free_addrmap;
}
+ pmap = map;
map->list.addr = *addr;
map->list.addr.s6_addr32[0] &= mask->s6_addr32[0];
map->list.addr.s6_addr32[1] &= mask->s6_addr32[1];
@@ -222,10 +223,8 @@ static int netlbl_mgmt_add_common(struct genl_info *info,
map->def.type = entry->def.type;
ret_val = netlbl_af6list_add(&map->list, &addrmap->list6);
- if (ret_val != 0) {
- kfree(map);
- goto add_free_addrmap;
- }
+ if (ret_val != 0)
+ goto add_free_map;
entry->def.type = NETLBL_NLTYPE_ADDRSELECT;
entry->def.addrsel = addrmap;
@@ -234,10 +233,12 @@ static int netlbl_mgmt_add_common(struct genl_info *info,
ret_val = netlbl_domhsh_add(entry, audit_info);
if (ret_val != 0)
- goto add_free_addrmap;
+ goto add_free_map;
return 0;
+add_free_map:
+ kfree(pmap);
add_free_addrmap:
kfree(addrmap);
add_doi_put_def:
--
2.30.2
From: Joe Thornber <[email protected]>
[ Upstream commit 5faafc77f7de69147d1e818026b9a0cbf036a7b2 ]
Current commit code resets the place where the search for free blocks
will begin back to the start of the metadata device. There are a couple
of repercussions to this:
- The first allocation after the commit is likely to take longer than
normal as it searches for a free block in an area that is likely to
have very few free blocks (if any).
- Any free blocks it finds will have been recently freed. Reusing them
means we have fewer old copies of the metadata to aid recovery from
hardware error.
Fix these issues by leaving the cursor alone, only resetting when the
search hits the end of the metadata device.
Signed-off-by: Joe Thornber <[email protected]>
Signed-off-by: Mike Snitzer <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/md/persistent-data/dm-space-map-disk.c | 9 ++++++++-
drivers/md/persistent-data/dm-space-map-metadata.c | 9 ++++++++-
2 files changed, 16 insertions(+), 2 deletions(-)
diff --git a/drivers/md/persistent-data/dm-space-map-disk.c b/drivers/md/persistent-data/dm-space-map-disk.c
index bf4c5e2ccb6f..e0acae7a3815 100644
--- a/drivers/md/persistent-data/dm-space-map-disk.c
+++ b/drivers/md/persistent-data/dm-space-map-disk.c
@@ -171,6 +171,14 @@ static int sm_disk_new_block(struct dm_space_map *sm, dm_block_t *b)
* Any block we allocate has to be free in both the old and current ll.
*/
r = sm_ll_find_common_free_block(&smd->old_ll, &smd->ll, smd->begin, smd->ll.nr_blocks, b);
+ if (r == -ENOSPC) {
+ /*
+ * There's no free block between smd->begin and the end of the metadata device.
+ * We search before smd->begin in case something has been freed.
+ */
+ r = sm_ll_find_common_free_block(&smd->old_ll, &smd->ll, 0, smd->begin, b);
+ }
+
if (r)
return r;
@@ -199,7 +207,6 @@ static int sm_disk_commit(struct dm_space_map *sm)
return r;
memcpy(&smd->old_ll, &smd->ll, sizeof(smd->old_ll));
- smd->begin = 0;
smd->nr_allocated_this_transaction = 0;
r = sm_disk_get_nr_free(sm, &nr_free);
diff --git a/drivers/md/persistent-data/dm-space-map-metadata.c b/drivers/md/persistent-data/dm-space-map-metadata.c
index 967d8f2a731f..62a4d7da9bd9 100644
--- a/drivers/md/persistent-data/dm-space-map-metadata.c
+++ b/drivers/md/persistent-data/dm-space-map-metadata.c
@@ -451,6 +451,14 @@ static int sm_metadata_new_block_(struct dm_space_map *sm, dm_block_t *b)
* Any block we allocate has to be free in both the old and current ll.
*/
r = sm_ll_find_common_free_block(&smm->old_ll, &smm->ll, smm->begin, smm->ll.nr_blocks, b);
+ if (r == -ENOSPC) {
+ /*
+ * There's no free block between smm->begin and the end of the metadata device.
+ * We search before smm->begin in case something has been freed.
+ */
+ r = sm_ll_find_common_free_block(&smm->old_ll, &smm->ll, 0, smm->begin, b);
+ }
+
if (r)
return r;
@@ -502,7 +510,6 @@ static int sm_metadata_commit(struct dm_space_map *sm)
return r;
memcpy(&smm->old_ll, &smm->ll, sizeof(smm->old_ll));
- smm->begin = 0;
smm->allocated_this_transaction = 0;
return 0;
--
2.30.2
From: Zhen Lei <[email protected]>
[ Upstream commit d6c2ce435ffe23ef7f395ae76ec747414589db46 ]
When an expander does not contain any 'phys', an appropriate error code -1
should be returned, as done elsewhere in this function. However, we
currently do not explicitly assign this error code to 'rc'. As a result, 0
was incorrectly returned.
Link: https://lore.kernel.org/r/[email protected]
Fixes: f92363d12359 ("[SCSI] mpt3sas: add new driver supporting 12GB SAS")
Reported-by: Hulk Robot <[email protected]>
Signed-off-by: Zhen Lei <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/scsi/mpt3sas/mpt3sas_scsih.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/scsi/mpt3sas/mpt3sas_scsih.c b/drivers/scsi/mpt3sas/mpt3sas_scsih.c
index 8735e4257028..49b751a8f5f3 100644
--- a/drivers/scsi/mpt3sas/mpt3sas_scsih.c
+++ b/drivers/scsi/mpt3sas/mpt3sas_scsih.c
@@ -5014,8 +5014,10 @@ _scsih_expander_add(struct MPT3SAS_ADAPTER *ioc, u16 handle)
handle, parent_handle, (unsigned long long)
sas_expander->sas_address, sas_expander->num_phys);
- if (!sas_expander->num_phys)
+ if (!sas_expander->num_phys) {
+ rc = -1;
goto out_fail;
+ }
sas_expander->phy = kcalloc(sas_expander->num_phys,
sizeof(struct _sas_phy), GFP_KERNEL);
if (!sas_expander->phy) {
--
2.30.2
From: Minchan Kim <[email protected]>
[ Upstream commit 648f2c6100cfa18e7dfe43bc0b9c3b73560d623c ]
In the field, we have seen lots of allocation failure from the call
path below.
06-03 13:29:12.999 1010315 31557 31557 W Binder : 31542_2: page allocation failure: order:0, mode:0x800(GFP_NOWAIT), nodemask=(null),cpuset=background,mems_allowed=0
...
...
06-03 13:29:12.999 1010315 31557 31557 W Call trace:
06-03 13:29:12.999 1010315 31557 31557 W : dump_backtrace.cfi_jt+0x0/0x8
06-03 13:29:12.999 1010315 31557 31557 W : dump_stack+0xc8/0x14c
06-03 13:29:12.999 1010315 31557 31557 W : warn_alloc+0x158/0x1c8
06-03 13:29:12.999 1010315 31557 31557 W : __alloc_pages_slowpath+0x9d8/0xb80
06-03 13:29:12.999 1010315 31557 31557 W : __alloc_pages_nodemask+0x1c4/0x430
06-03 13:29:12.999 1010315 31557 31557 W : allocate_slab+0xb4/0x390
06-03 13:29:12.999 1010315 31557 31557 W : ___slab_alloc+0x12c/0x3a4
06-03 13:29:12.999 1010315 31557 31557 W : kmem_cache_alloc+0x358/0x5e4
06-03 13:29:12.999 1010315 31557 31557 W : avc_alloc_node+0x30/0x184
06-03 13:29:12.999 1010315 31557 31557 W : avc_update_node+0x54/0x4f0
06-03 13:29:12.999 1010315 31557 31557 W : avc_has_extended_perms+0x1a4/0x460
06-03 13:29:12.999 1010315 31557 31557 W : selinux_file_ioctl+0x320/0x3d0
06-03 13:29:12.999 1010315 31557 31557 W : __arm64_sys_ioctl+0xec/0x1fc
06-03 13:29:12.999 1010315 31557 31557 W : el0_svc_common+0xc0/0x24c
06-03 13:29:12.999 1010315 31557 31557 W : el0_svc+0x28/0x88
06-03 13:29:12.999 1010315 31557 31557 W : el0_sync_handler+0x8c/0xf0
06-03 13:29:12.999 1010315 31557 31557 W : el0_sync+0x1a4/0x1c0
..
..
06-03 13:29:12.999 1010315 31557 31557 W SLUB : Unable to allocate memory on node -1, gfp=0x900(GFP_NOWAIT|__GFP_ZERO)
06-03 13:29:12.999 1010315 31557 31557 W cache : avc_node, object size: 72, buffer size: 80, default order: 0, min order: 0
06-03 13:29:12.999 1010315 31557 31557 W node 0 : slabs: 57, objs: 2907, free: 0
06-03 13:29:12.999 1010161 10686 10686 W SLUB : Unable to allocate memory on node -1, gfp=0x900(GFP_NOWAIT|__GFP_ZERO)
06-03 13:29:12.999 1010161 10686 10686 W cache : avc_node, object size: 72, buffer size: 80, default order: 0, min order: 0
06-03 13:29:12.999 1010161 10686 10686 W node 0 : slabs: 57, objs: 2907, free: 0
06-03 13:29:12.999 1010161 10686 10686 W SLUB : Unable to allocate memory on node -1, gfp=0x900(GFP_NOWAIT|__GFP_ZERO)
06-03 13:29:12.999 1010161 10686 10686 W cache : avc_node, object size: 72, buffer size: 80, default order: 0, min order: 0
06-03 13:29:12.999 1010161 10686 10686 W node 0 : slabs: 57, objs: 2907, free: 0
06-03 13:29:12.999 1010161 10686 10686 W SLUB : Unable to allocate memory on node -1, gfp=0x900(GFP_NOWAIT|__GFP_ZERO)
06-03 13:29:12.999 1010161 10686 10686 W cache : avc_node, object size: 72, buffer size: 80, default order: 0, min order: 0
06-03 13:29:12.999 1010161 10686 10686 W node 0 : slabs: 57, objs: 2907, free: 0
06-03 13:29:13.000 1010161 10686 10686 W SLUB : Unable to allocate memory on node -1, gfp=0x900(GFP_NOWAIT|__GFP_ZERO)
06-03 13:29:13.000 1010161 10686 10686 W cache : avc_node, object size: 72, buffer size: 80, default order: 0, min order: 0
06-03 13:29:13.000 1010161 10686 10686 W node 0 : slabs: 57, objs: 2907, free: 0
06-03 13:29:13.000 1010161 10686 10686 W SLUB : Unable to allocate memory on node -1, gfp=0x900(GFP_NOWAIT|__GFP_ZERO)
06-03 13:29:13.000 1010161 10686 10686 W cache : avc_node, object size: 72, buffer size: 80, default order: 0, min order: 0
06-03 13:29:13.000 1010161 10686 10686 W node 0 : slabs: 57, objs: 2907, free: 0
06-03 13:29:13.000 1010161 10686 10686 W SLUB : Unable to allocate memory on node -1, gfp=0x900(GFP_NOWAIT|__GFP_ZERO)
06-03 13:29:13.000 1010161 10686 10686 W cache : avc_node, object size: 72, buffer size: 80, default order: 0, min order: 0
06-03 13:29:13.000 1010161 10686 10686 W node 0 : slabs: 57, objs: 2907, free: 0
06-03 13:29:13.000 10230 30892 30892 W SLUB : Unable to allocate memory on node -1, gfp=0x900(GFP_NOWAIT|__GFP_ZERO)
06-03 13:29:13.000 10230 30892 30892 W cache : avc_node, object size: 72, buffer size: 80, default order: 0, min order: 0
06-03 13:29:13.000 10230 30892 30892 W node 0 : slabs: 57, objs: 2907, free: 0
06-03 13:29:13.000 10230 30892 30892 W SLUB : Unable to allocate memory on node -1, gfp=0x900(GFP_NOWAIT|__GFP_ZERO)
06-03 13:29:13.000 10230 30892 30892 W cache : avc_node, object size: 72, buffer size: 80, default order: 0, min order: 0
Based on [1], selinux is tolerate for failure of memory allocation.
Then, use __GFP_NOWARN together.
[1] 476accbe2f6e ("selinux: use GFP_NOWAIT in the AVC kmem_caches")
Signed-off-by: Minchan Kim <[email protected]>
[PM: subj fix, line wraps, normalized commit refs]
Signed-off-by: Paul Moore <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
security/selinux/avc.c | 13 +++++++------
1 file changed, 7 insertions(+), 6 deletions(-)
diff --git a/security/selinux/avc.c b/security/selinux/avc.c
index f3c473791b69..a16c72c2a967 100644
--- a/security/selinux/avc.c
+++ b/security/selinux/avc.c
@@ -348,26 +348,27 @@ static struct avc_xperms_decision_node
struct avc_xperms_decision_node *xpd_node;
struct extended_perms_decision *xpd;
- xpd_node = kmem_cache_zalloc(avc_xperms_decision_cachep, GFP_NOWAIT);
+ xpd_node = kmem_cache_zalloc(avc_xperms_decision_cachep,
+ GFP_NOWAIT | __GFP_NOWARN);
if (!xpd_node)
return NULL;
xpd = &xpd_node->xpd;
if (which & XPERMS_ALLOWED) {
xpd->allowed = kmem_cache_zalloc(avc_xperms_data_cachep,
- GFP_NOWAIT);
+ GFP_NOWAIT | __GFP_NOWARN);
if (!xpd->allowed)
goto error;
}
if (which & XPERMS_AUDITALLOW) {
xpd->auditallow = kmem_cache_zalloc(avc_xperms_data_cachep,
- GFP_NOWAIT);
+ GFP_NOWAIT | __GFP_NOWARN);
if (!xpd->auditallow)
goto error;
}
if (which & XPERMS_DONTAUDIT) {
xpd->dontaudit = kmem_cache_zalloc(avc_xperms_data_cachep,
- GFP_NOWAIT);
+ GFP_NOWAIT | __GFP_NOWARN);
if (!xpd->dontaudit)
goto error;
}
@@ -395,7 +396,7 @@ static struct avc_xperms_node *avc_xperms_alloc(void)
{
struct avc_xperms_node *xp_node;
- xp_node = kmem_cache_zalloc(avc_xperms_cachep, GFP_NOWAIT);
+ xp_node = kmem_cache_zalloc(avc_xperms_cachep, GFP_NOWAIT | __GFP_NOWARN);
if (!xp_node)
return xp_node;
INIT_LIST_HEAD(&xp_node->xpd_head);
@@ -548,7 +549,7 @@ static struct avc_node *avc_alloc_node(void)
{
struct avc_node *node;
- node = kmem_cache_zalloc(avc_node_cachep, GFP_NOWAIT);
+ node = kmem_cache_zalloc(avc_node_cachep, GFP_NOWAIT | __GFP_NOWARN);
if (!node)
goto out;
--
2.30.2
From: Colin Ian King <[email protected]>
[ Upstream commit fbbf23ddb2a1cc0c12c9f78237d1561c24006f50 ]
The object surf is not fully initialized and the uninitialized
field surf.data is being copied by the call to qxl_bo_create
via the call to qxl_gem_object_create. Set surf.data to zero
to ensure garbage data from the stack is not being copied.
Addresses-Coverity: ("Uninitialized scalar variable")
Fixes: f64122c1f6ad ("drm: add new QXL driver. (v1.4)")
Signed-off-by: Colin Ian King <[email protected]>
Link: http://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Gerd Hoffmann <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/qxl/qxl_dumb.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/gpu/drm/qxl/qxl_dumb.c b/drivers/gpu/drm/qxl/qxl_dumb.c
index d34bb4130ff0..5f757328fced 100644
--- a/drivers/gpu/drm/qxl/qxl_dumb.c
+++ b/drivers/gpu/drm/qxl/qxl_dumb.c
@@ -57,6 +57,8 @@ int qxl_mode_dumb_create(struct drm_file *file_priv,
surf.height = args->height;
surf.stride = pitch;
surf.format = format;
+ surf.data = 0;
+
r = qxl_gem_object_create_with_handle(qdev, file_priv,
QXL_GEM_DOMAIN_VRAM,
args->size, &surf, &qobj,
--
2.30.2
From: Xie Yongji <[email protected]>
[ Upstream commit cec7f1774605a5ef47c134af62afe7c75c30b0ee ]
The virtio_gpu_init() will free vgdev and vgdev->vbufs on failure.
But such failure will be caught by virtio_gpu_probe() and then
virtio_gpu_release() will be called to do some cleanup which
will free vgdev and vgdev->vbufs again. So let's set dev->dev_private
to NULL to avoid double free.
Signed-off-by: Xie Yongji <[email protected]>
Link: http://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Gerd Hoffmann <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/virtio/virtgpu_kms.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/gpu/drm/virtio/virtgpu_kms.c b/drivers/gpu/drm/virtio/virtgpu_kms.c
index 476b9993b068..44f9762e86e8 100644
--- a/drivers/gpu/drm/virtio/virtgpu_kms.c
+++ b/drivers/gpu/drm/virtio/virtgpu_kms.c
@@ -233,6 +233,7 @@ err_ttm:
err_vbufs:
vgdev->vdev->config->del_vqs(vgdev->vdev);
err_vqs:
+ dev->dev_private = NULL;
kfree(vgdev);
return ret;
}
--
2.30.2
From: Andy Shevchenko <[email protected]>
[ Upstream commit 443ef39b499cc9c6635f83238101f1bb923e9326 ]
Sparse is not happy about handling of strict types in pch_ptp_match():
.../pch_gbe_main.c:158:33: warning: incorrect type in argument 2 (different base types)
.../pch_gbe_main.c:158:33: expected unsigned short [usertype] uid_hi
.../pch_gbe_main.c:158:33: got restricted __be16 [usertype]
.../pch_gbe_main.c:158:45: warning: incorrect type in argument 3 (different base types)
.../pch_gbe_main.c:158:45: expected unsigned int [usertype] uid_lo
.../pch_gbe_main.c:158:45: got restricted __be32 [usertype]
.../pch_gbe_main.c:158:56: warning: incorrect type in argument 4 (different base types)
.../pch_gbe_main.c:158:56: expected unsigned short [usertype] seqid
.../pch_gbe_main.c:158:56: got restricted __be16 [usertype]
Fix that by switching to use proper accessors to BE data.
Reported-by: kernel test robot <[email protected]>
Signed-off-by: Andy Shevchenko <[email protected]>
Tested-by: Flavio Suligoi <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
.../ethernet/oki-semi/pch_gbe/pch_gbe_main.c | 19 ++++++-------------
1 file changed, 6 insertions(+), 13 deletions(-)
diff --git a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c
index a7ec9492d126..45cfb1a0933d 100644
--- a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c
+++ b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c
@@ -124,7 +124,7 @@ static int pch_ptp_match(struct sk_buff *skb, u16 uid_hi, u32 uid_lo, u16 seqid)
{
u8 *data = skb->data;
unsigned int offset;
- u16 *hi, *id;
+ u16 hi, id;
u32 lo;
if (ptp_classify_raw(skb) == PTP_CLASS_NONE)
@@ -135,14 +135,11 @@ static int pch_ptp_match(struct sk_buff *skb, u16 uid_hi, u32 uid_lo, u16 seqid)
if (skb->len < offset + OFF_PTP_SEQUENCE_ID + sizeof(seqid))
return 0;
- hi = (u16 *)(data + offset + OFF_PTP_SOURCE_UUID);
- id = (u16 *)(data + offset + OFF_PTP_SEQUENCE_ID);
+ hi = get_unaligned_be16(data + offset + OFF_PTP_SOURCE_UUID + 0);
+ lo = get_unaligned_be32(data + offset + OFF_PTP_SOURCE_UUID + 2);
+ id = get_unaligned_be16(data + offset + OFF_PTP_SEQUENCE_ID);
- memcpy(&lo, &hi[1], sizeof(lo));
-
- return (uid_hi == *hi &&
- uid_lo == lo &&
- seqid == *id);
+ return (uid_hi == hi && uid_lo == lo && seqid == id);
}
static void
@@ -152,7 +149,6 @@ pch_rx_timestamp(struct pch_gbe_adapter *adapter, struct sk_buff *skb)
struct pci_dev *pdev;
u64 ns;
u32 hi, lo, val;
- u16 uid, seq;
if (!adapter->hwts_rx_en)
return;
@@ -168,10 +164,7 @@ pch_rx_timestamp(struct pch_gbe_adapter *adapter, struct sk_buff *skb)
lo = pch_src_uuid_lo_read(pdev);
hi = pch_src_uuid_hi_read(pdev);
- uid = hi & 0xffff;
- seq = (hi >> 16) & 0xffff;
-
- if (!pch_ptp_match(skb, htons(uid), htonl(lo), htons(seq)))
+ if (!pch_ptp_match(skb, hi, lo, hi >> 16))
goto out;
ns = pch_rx_snap_read(pdev);
--
2.30.2
From: Dillon Min <[email protected]>
[ Upstream commit 5d11e6aad1811ea293ee2996cec9124f7fccb661 ]
The m2m_ctx resources was allocated by v4l2_m2m_ctx_init() in g2d_open()
should be freed from g2d_release() when it's not used.
Fix it
Fixes: 918847341af0 ("[media] v4l: add G2D driver for s5p device family")
Signed-off-by: Dillon Min <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/media/platform/s5p-g2d/g2d.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/media/platform/s5p-g2d/g2d.c b/drivers/media/platform/s5p-g2d/g2d.c
index 2b939555cccb..21968ef9dc45 100644
--- a/drivers/media/platform/s5p-g2d/g2d.c
+++ b/drivers/media/platform/s5p-g2d/g2d.c
@@ -282,6 +282,9 @@ static int g2d_release(struct file *file)
struct g2d_dev *dev = video_drvdata(file);
struct g2d_ctx *ctx = fh2ctx(file->private_data);
+ mutex_lock(&dev->mutex);
+ v4l2_m2m_ctx_release(ctx->fh.m2m_ctx);
+ mutex_unlock(&dev->mutex);
v4l2_ctrl_handler_free(&ctx->ctrl_handler);
v4l2_fh_del(&ctx->fh);
v4l2_fh_exit(&ctx->fh);
--
2.30.2
From: Mauro Carvalho Chehab <[email protected]>
[ Upstream commit abc0226df64dc137b48b911c1fe4319aec5891bb ]
The risk of especulation is actually almost-non-existing here,
as there are very few users of TCP/IP using the DVB stack,
as, this is mainly used with DVB-S/S2 cards, and only by people
that receives TCP/IP from satellite connections, which limits
a lot the number of users of such feature(*).
(*) In thesis, DVB-C cards could also benefit from it, but I'm
yet to see a hardware that supports it.
Yet, fixing it is trivial.
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/media/dvb-core/dvb_net.c | 25 +++++++++++++++++++------
1 file changed, 19 insertions(+), 6 deletions(-)
diff --git a/drivers/media/dvb-core/dvb_net.c b/drivers/media/dvb-core/dvb_net.c
index ce4332e80a91..735baa74043c 100644
--- a/drivers/media/dvb-core/dvb_net.c
+++ b/drivers/media/dvb-core/dvb_net.c
@@ -57,6 +57,7 @@
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/netdevice.h>
+#include <linux/nospec.h>
#include <linux/etherdevice.h>
#include <linux/dvb/net.h>
#include <linux/uio.h>
@@ -1350,14 +1351,20 @@ static int dvb_net_do_ioctl(struct file *file,
struct net_device *netdev;
struct dvb_net_priv *priv_data;
struct dvb_net_if *dvbnetif = parg;
+ int if_num = dvbnetif->if_num;
- if (dvbnetif->if_num >= DVB_NET_DEVICES_MAX ||
- !dvbnet->state[dvbnetif->if_num]) {
+ if (if_num >= DVB_NET_DEVICES_MAX) {
ret = -EINVAL;
goto ioctl_error;
}
+ if_num = array_index_nospec(if_num, DVB_NET_DEVICES_MAX);
- netdev = dvbnet->device[dvbnetif->if_num];
+ if (!dvbnet->state[if_num]) {
+ ret = -EINVAL;
+ goto ioctl_error;
+ }
+
+ netdev = dvbnet->device[if_num];
priv_data = netdev_priv(netdev);
dvbnetif->pid=priv_data->pid;
@@ -1410,14 +1417,20 @@ static int dvb_net_do_ioctl(struct file *file,
struct net_device *netdev;
struct dvb_net_priv *priv_data;
struct __dvb_net_if_old *dvbnetif = parg;
+ int if_num = dvbnetif->if_num;
+
+ if (if_num >= DVB_NET_DEVICES_MAX) {
+ ret = -EINVAL;
+ goto ioctl_error;
+ }
+ if_num = array_index_nospec(if_num, DVB_NET_DEVICES_MAX);
- if (dvbnetif->if_num >= DVB_NET_DEVICES_MAX ||
- !dvbnet->state[dvbnetif->if_num]) {
+ if (!dvbnet->state[if_num]) {
ret = -EINVAL;
goto ioctl_error;
}
- netdev = dvbnet->device[dvbnetif->if_num];
+ netdev = dvbnet->device[if_num];
priv_data = netdev_priv(netdev);
dvbnetif->pid=priv_data->pid;
--
2.30.2
From: Zou Wei <[email protected]>
[ Upstream commit 1c72e6ab66b9598cac741ed397438a52065a8f1f ]
This module's remove path calls del_timer(). However, that function
does not wait until the timer handler finishes. This means that the
timer handler may still be running after the driver's remove function
has finished, which would result in a use-after-free.
Fix by calling del_timer_sync(), which makes sure the timer handler
has finished, and unable to re-schedule itself.
Reported-by: Hulk Robot <[email protected]>
Signed-off-by: Zou Wei <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/atm/iphase.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/atm/iphase.c b/drivers/atm/iphase.c
index 860a33a90ebf..dc1b7f11e6af 100644
--- a/drivers/atm/iphase.c
+++ b/drivers/atm/iphase.c
@@ -3296,7 +3296,7 @@ static void __exit ia_module_exit(void)
{
pci_unregister_driver(&ia_driver);
- del_timer(&ia_timer);
+ del_timer_sync(&ia_timer);
}
module_init(ia_module_init);
--
2.30.2
From: Zhen Lei <[email protected]>
[ Upstream commit d9b576917a1d0efa293801a264150a1b37691617 ]
Return error code -EINVAL rather than '0' when the combo devices are not
supported.
Fixes: fa71c605c2bb ("Input: combine hil_kbd and hil_ptr drivers")
Reported-by: Hulk Robot <[email protected]>
Signed-off-by: Zhen Lei <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Dmitry Torokhov <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/input/keyboard/hil_kbd.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/input/keyboard/hil_kbd.c b/drivers/input/keyboard/hil_kbd.c
index 5b152f25a8e1..da07742fd9a4 100644
--- a/drivers/input/keyboard/hil_kbd.c
+++ b/drivers/input/keyboard/hil_kbd.c
@@ -512,6 +512,7 @@ static int hil_dev_connect(struct serio *serio, struct serio_driver *drv)
HIL_IDD_NUM_AXES_PER_SET(*idd)) {
printk(KERN_INFO PREFIX
"combo devices are not supported.\n");
+ error = -EINVAL;
goto bail1;
}
--
2.30.2
From: Yu Kuai <[email protected]>
[ Upstream commit 37188559c610f1b7eec83c8e448936c361c578de ]
Theoretically, it will cause index out of bounds error if
'num_bytes_read' is greater than 4. As we expect it(and was tested)
never to be greater than 4, error out if it happens.
Fixes: c1986ee9bea3 ("[PATCH] New Omnikey Cardman 4000 driver")
Signed-off-by: Yu Kuai <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/char/pcmcia/cm4000_cs.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/drivers/char/pcmcia/cm4000_cs.c b/drivers/char/pcmcia/cm4000_cs.c
index c115217c79ae..f8d98f7e6fb7 100644
--- a/drivers/char/pcmcia/cm4000_cs.c
+++ b/drivers/char/pcmcia/cm4000_cs.c
@@ -544,6 +544,10 @@ static int set_protocol(struct cm4000_dev *dev, struct ptsreq *ptsreq)
io_read_num_rec_bytes(iobase, &num_bytes_read);
if (num_bytes_read >= 4) {
DEBUGP(2, dev, "NumRecBytes = %i\n", num_bytes_read);
+ if (num_bytes_read > 4) {
+ rc = -EIO;
+ goto exit_setprotocol;
+ }
break;
}
mdelay(10);
--
2.30.2
From: Christophe Leroy <[email protected]>
[ Upstream commit b05fbcc36be1f8597a1febef4892053a0b2f3f60 ]
With a config having PAGE_SIZE set to 256K, BTRFS build fails
with the following message
include/linux/compiler_types.h:326:38: error: call to
'__compiletime_assert_791' declared with attribute error:
BUILD_BUG_ON failed: (BTRFS_MAX_COMPRESSED % PAGE_SIZE) != 0
BTRFS_MAX_COMPRESSED being 128K, BTRFS cannot support platforms with
256K pages at the time being.
There are two platforms that can select 256K pages:
- hexagon
- powerpc
Disable BTRFS when 256K page size is selected. Supporting this would
require changes to the subpage mode that's currently being developed.
Given that 256K is many times larger than page sizes commonly used and
for what the algorithms and structures have been tuned, it's out of
scope and disabling build is a reasonable option.
Reported-by: kernel test robot <[email protected]>
Signed-off-by: Christophe Leroy <[email protected]>
[ update changelog ]
Signed-off-by: David Sterba <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/btrfs/Kconfig | 2 ++
1 file changed, 2 insertions(+)
diff --git a/fs/btrfs/Kconfig b/fs/btrfs/Kconfig
index 80e9c18ea64f..fd6b67c40d9d 100644
--- a/fs/btrfs/Kconfig
+++ b/fs/btrfs/Kconfig
@@ -9,6 +9,8 @@ config BTRFS_FS
select RAID6_PQ
select XOR_BLOCKS
select SRCU
+ depends on !PPC_256K_PAGES # powerpc
+ depends on !PAGE_SIZE_256KB # hexagon
help
Btrfs is a general purpose copy-on-write filesystem with extents,
--
2.30.2
From: Stephan Gerhold <[email protected]>
[ Upstream commit d25b224f8e5507879b36a769a6d1324cf163466c ]
When sm5502_init_dev_type() iterates over sm5502_reg_data to
initialize the registers it is limited by ARRAY_SIZE(sm5502_reg_data).
There is no need to add another empty element to sm5502_reg_data.
Having the additional empty element in sm5502_reg_data will just
result in writing 0xff to register 0x00, which does not really
make sense.
Fixes: 914b881f9452 ("extcon: sm5502: Add support new SM5502 extcon device driver")
Signed-off-by: Stephan Gerhold <[email protected]>
Signed-off-by: Chanwoo Choi <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/extcon/extcon-sm5502.c | 1 -
1 file changed, 1 deletion(-)
diff --git a/drivers/extcon/extcon-sm5502.c b/drivers/extcon/extcon-sm5502.c
index f63f9961ac12..9b8c79bc3acd 100644
--- a/drivers/extcon/extcon-sm5502.c
+++ b/drivers/extcon/extcon-sm5502.c
@@ -92,7 +92,6 @@ static struct reg_data sm5502_reg_data[] = {
| SM5502_REG_INTM2_MHL_MASK,
.invert = true,
},
- { }
};
/* List of detectable cables */
--
2.30.2
From: Eric Dumazet <[email protected]>
[ Upstream commit 85e8b032d6ebb0f698a34dd22c2f13443d905888 ]
syzbot complained in neigh_reduce(), because rcu_read_lock_bh()
is treated differently than rcu_read_lock()
WARNING: suspicious RCU usage
5.13.0-rc6-syzkaller #0 Not tainted
-----------------------------
include/net/addrconf.h:313 suspicious rcu_dereference_check() usage!
other info that might help us debug this:
rcu_scheduler_active = 2, debug_locks = 1
3 locks held by kworker/0:0/5:
#0: ffff888011064d38 ((wq_completion)events){+.+.}-{0:0}, at: arch_atomic64_set arch/x86/include/asm/atomic64_64.h:34 [inline]
#0: ffff888011064d38 ((wq_completion)events){+.+.}-{0:0}, at: atomic64_set include/asm-generic/atomic-instrumented.h:856 [inline]
#0: ffff888011064d38 ((wq_completion)events){+.+.}-{0:0}, at: atomic_long_set include/asm-generic/atomic-long.h:41 [inline]
#0: ffff888011064d38 ((wq_completion)events){+.+.}-{0:0}, at: set_work_data kernel/workqueue.c:617 [inline]
#0: ffff888011064d38 ((wq_completion)events){+.+.}-{0:0}, at: set_work_pool_and_clear_pending kernel/workqueue.c:644 [inline]
#0: ffff888011064d38 ((wq_completion)events){+.+.}-{0:0}, at: process_one_work+0x871/0x1600 kernel/workqueue.c:2247
#1: ffffc90000ca7da8 ((work_completion)(&port->wq)){+.+.}-{0:0}, at: process_one_work+0x8a5/0x1600 kernel/workqueue.c:2251
#2: ffffffff8bf795c0 (rcu_read_lock_bh){....}-{1:2}, at: __dev_queue_xmit+0x1da/0x3130 net/core/dev.c:4180
stack backtrace:
CPU: 0 PID: 5 Comm: kworker/0:0 Not tainted 5.13.0-rc6-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Workqueue: events ipvlan_process_multicast
Call Trace:
__dump_stack lib/dump_stack.c:79 [inline]
dump_stack+0x141/0x1d7 lib/dump_stack.c:120
__in6_dev_get include/net/addrconf.h:313 [inline]
__in6_dev_get include/net/addrconf.h:311 [inline]
neigh_reduce drivers/net/vxlan.c:2167 [inline]
vxlan_xmit+0x34d5/0x4c30 drivers/net/vxlan.c:2919
__netdev_start_xmit include/linux/netdevice.h:4944 [inline]
netdev_start_xmit include/linux/netdevice.h:4958 [inline]
xmit_one net/core/dev.c:3654 [inline]
dev_hard_start_xmit+0x1eb/0x920 net/core/dev.c:3670
__dev_queue_xmit+0x2133/0x3130 net/core/dev.c:4246
ipvlan_process_multicast+0xa99/0xd70 drivers/net/ipvlan/ipvlan_core.c:287
process_one_work+0x98d/0x1600 kernel/workqueue.c:2276
worker_thread+0x64c/0x1120 kernel/workqueue.c:2422
kthread+0x3b1/0x4a0 kernel/kthread.c:313
ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:294
Fixes: f564f45c4518 ("vxlan: add ipv6 proxy support")
Signed-off-by: Eric Dumazet <[email protected]>
Reported-by: syzbot <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/vxlan.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/net/vxlan.c b/drivers/net/vxlan.c
index 50ede6b8b874..4d44ec5b7cd7 100644
--- a/drivers/net/vxlan.c
+++ b/drivers/net/vxlan.c
@@ -1549,6 +1549,7 @@ static int neigh_reduce(struct net_device *dev, struct sk_buff *skb)
struct neighbour *n;
struct inet6_dev *in6_dev;
+ rcu_read_lock();
in6_dev = __in6_dev_get(dev);
if (!in6_dev)
goto out;
@@ -1605,6 +1606,7 @@ static int neigh_reduce(struct net_device *dev, struct sk_buff *skb)
}
out:
+ rcu_read_unlock();
consume_skb(skb);
return NETDEV_TX_OK;
}
--
2.30.2
From: Jesse Brandeburg <[email protected]>
[ Upstream commit d4ef55288aa2e1b76033717242728ac98ddc4721 ]
Sparse tool was warning on some implicit conversions from
little endian data read from the EEPROM on the e100 cards.
Fix these by being explicit about the conversions using
le16_to_cpu().
Signed-off-by: Jesse Brandeburg <[email protected]>
Signed-off-by: Tony Nguyen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/intel/e100.c | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)
diff --git a/drivers/net/ethernet/intel/e100.c b/drivers/net/ethernet/intel/e100.c
index 93c29094ceff..9035cb5fc70d 100644
--- a/drivers/net/ethernet/intel/e100.c
+++ b/drivers/net/ethernet/intel/e100.c
@@ -1423,7 +1423,7 @@ static int e100_phy_check_without_mii(struct nic *nic)
u8 phy_type;
int without_mii;
- phy_type = (nic->eeprom[eeprom_phy_iface] >> 8) & 0x0f;
+ phy_type = (le16_to_cpu(nic->eeprom[eeprom_phy_iface]) >> 8) & 0x0f;
switch (phy_type) {
case NoSuchPhy: /* Non-MII PHY; UNTESTED! */
@@ -1543,7 +1543,7 @@ static int e100_phy_init(struct nic *nic)
mdio_write(netdev, nic->mii.phy_id, MII_BMCR, bmcr);
} else if ((nic->mac >= mac_82550_D102) || ((nic->flags & ich) &&
(mdio_read(netdev, nic->mii.phy_id, MII_TPISTATUS) & 0x8000) &&
- (nic->eeprom[eeprom_cnfg_mdix] & eeprom_mdix_enabled))) {
+ (le16_to_cpu(nic->eeprom[eeprom_cnfg_mdix]) & eeprom_mdix_enabled))) {
/* enable/disable MDI/MDI-X auto-switching. */
mdio_write(netdev, nic->mii.phy_id, MII_NCONFIG,
nic->mii.force_media ? 0 : NCONFIG_AUTO_SWITCH);
@@ -2298,9 +2298,9 @@ static int e100_asf(struct nic *nic)
{
/* ASF can be enabled from eeprom */
return (nic->pdev->device >= 0x1050) && (nic->pdev->device <= 0x1057) &&
- (nic->eeprom[eeprom_config_asf] & eeprom_asf) &&
- !(nic->eeprom[eeprom_config_asf] & eeprom_gcl) &&
- ((nic->eeprom[eeprom_smbus_addr] & 0xFF) != 0xFE);
+ (le16_to_cpu(nic->eeprom[eeprom_config_asf]) & eeprom_asf) &&
+ !(le16_to_cpu(nic->eeprom[eeprom_config_asf]) & eeprom_gcl) &&
+ ((le16_to_cpu(nic->eeprom[eeprom_smbus_addr]) & 0xFF) != 0xFE);
}
static int e100_up(struct nic *nic)
@@ -2952,7 +2952,7 @@ static int e100_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
/* Wol magic packet can be enabled from eeprom */
if ((nic->mac >= mac_82558_D101_A4) &&
- (nic->eeprom[eeprom_id] & eeprom_id_wol)) {
+ (le16_to_cpu(nic->eeprom[eeprom_id]) & eeprom_id_wol)) {
nic->flags |= wol_magic;
device_set_wakeup_enable(&pdev->dev, true);
}
--
2.30.2
From: Axel Lin <[email protected]>
[ Upstream commit a336dc8f683e5be794186b5643cd34cb28dd2c53 ]
Use DIV_ROUND_UP to prevent truncation by integer division issue.
This ensures we return enough delay time.
Also fix returning negative value when new_sel < old_sel.
Signed-off-by: Axel Lin <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/regulator/da9052-regulator.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/regulator/da9052-regulator.c b/drivers/regulator/da9052-regulator.c
index 12a25b40e473..fa9cb7df79de 100644
--- a/drivers/regulator/da9052-regulator.c
+++ b/drivers/regulator/da9052-regulator.c
@@ -258,7 +258,8 @@ static int da9052_regulator_set_voltage_time_sel(struct regulator_dev *rdev,
case DA9052_ID_BUCK3:
case DA9052_ID_LDO2:
case DA9052_ID_LDO3:
- ret = (new_sel - old_sel) * info->step_uV / 6250;
+ ret = DIV_ROUND_UP(abs(new_sel - old_sel) * info->step_uV,
+ 6250);
break;
}
--
2.30.2
From: Dinghao Liu <[email protected]>
[ Upstream commit 9c04cfcd4aad232e36306cdc5c74cd9fc9148a7e ]
When vsi->type == I40E_VSI_FDIR, we have caught the return value of
i40e_vsi_request_irq() but without further handling. Check and execute
memory clean on failure just like the other i40e_vsi_request_irq().
Fixes: 8a9eb7d3cbcab ("i40e: rework fdir setup and teardown")
Signed-off-by: Dinghao Liu <[email protected]>
Tested-by: Tony Brelinski <[email protected]>
Signed-off-by: Tony Nguyen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/intel/i40e/i40e_main.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c
index 8bdc17658f3f..d6d4faa5c542 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_main.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_main.c
@@ -5409,6 +5409,8 @@ int i40e_vsi_open(struct i40e_vsi *vsi)
dev_driver_string(&pf->pdev->dev),
dev_name(&pf->pdev->dev));
err = i40e_vsi_request_irq(vsi, int_name);
+ if (err)
+ goto err_setup_rx;
} else {
err = -EINVAL;
--
2.30.2
From: Quat Le <[email protected]>
commit 104739aca4488909175e9e31d5cd7d75b82a2046 upstream.
If the device is power-cycled, it takes time for the initiator to transmit
the periodic NOTIFY (ENABLE SPINUP) SAS primitive, and for the device to
respond to the primitive to become ACTIVE. Retry the I/O request to allow
the device time to become ACTIVE.
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Bart Van Assche <[email protected]>
Signed-off-by: Quat Le <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/scsi/scsi_lib.c | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/scsi/scsi_lib.c
+++ b/drivers/scsi/scsi_lib.c
@@ -1004,6 +1004,7 @@ void scsi_io_completion(struct scsi_cmnd
case 0x07: /* operation in progress */
case 0x08: /* Long write in progress */
case 0x09: /* self test in progress */
+ case 0x11: /* notify (enable spinup) required */
case 0x14: /* space allocation in progress */
action = ACTION_DELAYED_RETRY;
break;
From: Muchun Song <[email protected]>
[ Upstream commit 8b0ed8443ae6458786580d36b7d5f8125535c5d4 ]
The caller of wb_get_create() should pin the memcg, because
wb_get_create() relies on this guarantee. The rcu read lock
only can guarantee that the memcg css returned by css_from_id()
cannot be released, but the reference of the memcg can be zero.
rcu_read_lock()
memcg_css = css_from_id()
wb_get_create(memcg_css)
cgwb_create(memcg_css)
// css_get can change the ref counter from 0 back to 1
css_get(memcg_css)
rcu_read_unlock()
Fix it by holding a reference to the css before calling
wb_get_create(). This is not a problem I encountered in the
real world. Just the result of a code review.
Fixes: 682aa8e1a6a1 ("writeback: implement unlocked_inode_to_wb transaction and use it for stat updates")
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Muchun Song <[email protected]>
Acked-by: Michal Hocko <[email protected]>
Acked-by: Tejun Heo <[email protected]>
Signed-off-by: Jan Kara <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/fs-writeback.c | 9 +++++++--
1 file changed, 7 insertions(+), 2 deletions(-)
diff --git a/fs/fs-writeback.c b/fs/fs-writeback.c
index 958a1bd0b5fc..0ce7ff7a2ce8 100644
--- a/fs/fs-writeback.c
+++ b/fs/fs-writeback.c
@@ -512,9 +512,14 @@ static void inode_switch_wbs(struct inode *inode, int new_wb_id)
/* find and pin the new wb */
rcu_read_lock();
memcg_css = css_from_id(new_wb_id, &memory_cgrp_subsys);
- if (memcg_css)
- isw->new_wb = wb_get_create(bdi, memcg_css, GFP_ATOMIC);
+ if (memcg_css && !css_tryget(memcg_css))
+ memcg_css = NULL;
rcu_read_unlock();
+ if (!memcg_css)
+ goto out_free;
+
+ isw->new_wb = wb_get_create(bdi, memcg_css, GFP_ATOMIC);
+ css_put(memcg_css);
if (!isw->new_wb)
goto out_free;
--
2.30.2
From: Tony Lindgren <[email protected]>
[ Upstream commit 11ef6bc846dcdce838f0b00c5f6a562c57e5d43b ]
At least on wl12xx, reading the MAC after boot can fail with a warning
at drivers/net/wireless/ti/wlcore/sdio.c:78 wl12xx_sdio_raw_read.
The failed call comes from wl12xx_get_mac() that wlcore_nvs_cb() calls
after request_firmware_work_func().
After the error, no wireless interface is created. Reloading the wl12xx
module makes the interface work.
Turns out the wlan controller can be in a low-power ELP state after the
boot from the bootloader or kexec, and needs to be woken up first.
Let's wake the hardware and add a sleep after that similar to
wl12xx_pre_boot() is already doing.
Note that a similar issue could exist for wl18xx, but I have not seen it
so far. And a search for wl18xx_get_mac and wl12xx_sdio_raw_read did not
produce similar errors.
Cc: Carl Philipp Klemm <[email protected]>
Signed-off-by: Tony Lindgren <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/ti/wl12xx/main.c | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/drivers/net/wireless/ti/wl12xx/main.c b/drivers/net/wireless/ti/wl12xx/main.c
index e4b28d37046a..c453a634d769 100644
--- a/drivers/net/wireless/ti/wl12xx/main.c
+++ b/drivers/net/wireless/ti/wl12xx/main.c
@@ -1515,6 +1515,13 @@ static int wl12xx_get_fuse_mac(struct wl1271 *wl)
u32 mac1, mac2;
int ret;
+ /* Device may be in ELP from the bootloader or kexec */
+ ret = wlcore_write32(wl, WL12XX_WELP_ARM_COMMAND, WELP_ARM_COMMAND_VAL);
+ if (ret < 0)
+ goto out;
+
+ usleep_range(500000, 700000);
+
ret = wlcore_set_partition(wl, &wl->ptable[PART_DRPW]);
if (ret < 0)
goto out;
--
2.30.2
From: Kai-Heng Feng <[email protected]>
[ Upstream commit 0ea9fd001a14ebc294f112b0361a4e601551d508 ]
Rfkill block and unblock Intel USB Bluetooth [8087:0026] may make it
stops working:
[ 509.691509] Bluetooth: hci0: HCI reset during shutdown failed
[ 514.897584] Bluetooth: hci0: MSFT filter_enable is already on
[ 530.044751] usb 3-10: reset full-speed USB device number 5 using xhci_hcd
[ 545.660350] usb 3-10: device descriptor read/64, error -110
[ 561.283530] usb 3-10: device descriptor read/64, error -110
[ 561.519682] usb 3-10: reset full-speed USB device number 5 using xhci_hcd
[ 566.686650] Bluetooth: hci0: unexpected event for opcode 0x0500
[ 568.752452] Bluetooth: hci0: urb 0000000096cd309b failed to resubmit (113)
[ 578.797955] Bluetooth: hci0: Failed to read MSFT supported features (-110)
[ 586.286565] Bluetooth: hci0: urb 00000000c522f633 failed to resubmit (113)
[ 596.215302] Bluetooth: hci0: Failed to read MSFT supported features (-110)
Or kernel panics because other workqueues already freed skb:
[ 2048.663763] BUG: kernel NULL pointer dereference, address: 0000000000000000
[ 2048.663775] #PF: supervisor read access in kernel mode
[ 2048.663779] #PF: error_code(0x0000) - not-present page
[ 2048.663782] PGD 0 P4D 0
[ 2048.663787] Oops: 0000 [#1] SMP NOPTI
[ 2048.663793] CPU: 3 PID: 4491 Comm: rfkill Tainted: G W 5.13.0-rc1-next-20210510+ #20
[ 2048.663799] Hardware name: HP HP EliteBook 850 G8 Notebook PC/8846, BIOS T76 Ver. 01.01.04 12/02/2020
[ 2048.663801] RIP: 0010:__skb_ext_put+0x6/0x50
[ 2048.663814] Code: 8b 1b 48 85 db 75 db 5b 41 5c 5d c3 be 01 00 00 00 e8 de 13 c0 ff eb e7 be 02 00 00 00 e8 d2 13 c0 ff eb db 0f 1f 44 00 00 55 <8b> 07 48 89 e5 83 f8 01 74 14 b8 ff ff ff ff f0 0f c1
07 83 f8 01
[ 2048.663819] RSP: 0018:ffffc1d105b6fd80 EFLAGS: 00010286
[ 2048.663824] RAX: 0000000000000000 RBX: ffff9d9ac5649000 RCX: 0000000000000000
[ 2048.663827] RDX: ffffffffc0d1daf6 RSI: 0000000000000206 RDI: 0000000000000000
[ 2048.663830] RBP: ffffc1d105b6fd98 R08: 0000000000000001 R09: ffff9d9ace8ceac0
[ 2048.663834] R10: ffff9d9ace8ceac0 R11: 0000000000000001 R12: ffff9d9ac5649000
[ 2048.663838] R13: 0000000000000000 R14: 00007ffe0354d650 R15: 0000000000000000
[ 2048.663843] FS: 00007fe02ab19740(0000) GS:ffff9d9e5f8c0000(0000) knlGS:0000000000000000
[ 2048.663849] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 2048.663853] CR2: 0000000000000000 CR3: 0000000111a52004 CR4: 0000000000770ee0
[ 2048.663856] PKRU: 55555554
[ 2048.663859] Call Trace:
[ 2048.663865] ? skb_release_head_state+0x5e/0x80
[ 2048.663873] kfree_skb+0x2f/0xb0
[ 2048.663881] btusb_shutdown_intel_new+0x36/0x60 [btusb]
[ 2048.663905] hci_dev_do_close+0x48c/0x5e0 [bluetooth]
[ 2048.663954] ? __cond_resched+0x1a/0x50
[ 2048.663962] hci_rfkill_set_block+0x56/0xa0 [bluetooth]
[ 2048.664007] rfkill_set_block+0x98/0x170
[ 2048.664016] rfkill_fop_write+0x136/0x1e0
[ 2048.664022] vfs_write+0xc7/0x260
[ 2048.664030] ksys_write+0xb1/0xe0
[ 2048.664035] ? exit_to_user_mode_prepare+0x37/0x1c0
[ 2048.664042] __x64_sys_write+0x1a/0x20
[ 2048.664048] do_syscall_64+0x40/0xb0
[ 2048.664055] entry_SYSCALL_64_after_hwframe+0x44/0xae
[ 2048.664060] RIP: 0033:0x7fe02ac23c27
[ 2048.664066] Code: 0d 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b7 0f 1f 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 28 48 89 54 24 18 48 89 74 24
[ 2048.664070] RSP: 002b:00007ffe0354d638 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
[ 2048.664075] RAX: ffffffffffffffda RBX: 0000000000000001 RCX: 00007fe02ac23c27
[ 2048.664078] RDX: 0000000000000008 RSI: 00007ffe0354d650 RDI: 0000000000000003
[ 2048.664081] RBP: 0000000000000000 R08: 0000559b05998440 R09: 0000559b05998440
[ 2048.664084] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000003
[ 2048.664086] R13: 0000000000000000 R14: ffffffff00000000 R15: 00000000ffffffff
So move the shutdown callback to a place where workqueues are either
flushed or cancelled to resolve the issue.
Signed-off-by: Kai-Heng Feng <[email protected]>
Signed-off-by: Marcel Holtmann <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/bluetooth/hci_core.c | 16 ++++++++--------
1 file changed, 8 insertions(+), 8 deletions(-)
diff --git a/net/bluetooth/hci_core.c b/net/bluetooth/hci_core.c
index 041e719543fe..c478924198d5 100644
--- a/net/bluetooth/hci_core.c
+++ b/net/bluetooth/hci_core.c
@@ -1666,14 +1666,6 @@ int hci_dev_do_close(struct hci_dev *hdev)
BT_DBG("%s %p", hdev->name, hdev);
- if (!hci_dev_test_flag(hdev, HCI_UNREGISTER) &&
- !hci_dev_test_flag(hdev, HCI_USER_CHANNEL) &&
- test_bit(HCI_UP, &hdev->flags)) {
- /* Execute vendor specific shutdown routine */
- if (hdev->shutdown)
- hdev->shutdown(hdev);
- }
-
cancel_delayed_work(&hdev->power_off);
hci_req_cancel(hdev, ENODEV);
@@ -1746,6 +1738,14 @@ int hci_dev_do_close(struct hci_dev *hdev)
clear_bit(HCI_INIT, &hdev->flags);
}
+ if (!hci_dev_test_flag(hdev, HCI_UNREGISTER) &&
+ !hci_dev_test_flag(hdev, HCI_USER_CHANNEL) &&
+ test_bit(HCI_UP, &hdev->flags)) {
+ /* Execute vendor specific shutdown routine */
+ if (hdev->shutdown)
+ hdev->shutdown(hdev);
+ }
+
/* flush cmd work */
flush_work(&hdev->cmd_work);
--
2.30.2
From: Tim Jiang <[email protected]>
[ Upstream commit 4f00bfb372674d586c4a261bfc595cbce101fbb6 ]
This is btsoc timing issue, after host start to downloading bt firmware,
ep2 need time to switch from function acl to function dfu, so host add
20ms delay as workaround.
Signed-off-by: Tim Jiang <[email protected]>
Signed-off-by: Marcel Holtmann <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/bluetooth/btusb.c | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index 7039a58a6a4e..3d62f17111cb 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -2555,6 +2555,11 @@ static int btusb_setup_qca_download_fw(struct hci_dev *hdev,
sent += size;
count -= size;
+ /* ep2 need time to switch from function acl to function dfu,
+ * so we add 20ms delay here.
+ */
+ msleep(20);
+
while (count) {
size = min_t(size_t, count, QCA_DFU_PACKET_LEN);
--
2.30.2
From: Jonathan Cameron <[email protected]>
[ Upstream commit 334883894bc1e145a1e0f5de1b0d1b6a1133f0e6 ]
To make code more readable, use a structure to express the channel
layout and ensure the timestamp is 8 byte aligned.
Found during an audit of all calls of this function.
Fixes: db6a19b8251f ("iio: accel: Add trigger support for STK8BA50")
Signed-off-by: Jonathan Cameron <[email protected]>
Reviewed-by: Andy Shevchenko <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/iio/accel/stk8ba50.c | 17 ++++++++---------
1 file changed, 8 insertions(+), 9 deletions(-)
diff --git a/drivers/iio/accel/stk8ba50.c b/drivers/iio/accel/stk8ba50.c
index 5709d9eb8f34..b6e2d15024c8 100644
--- a/drivers/iio/accel/stk8ba50.c
+++ b/drivers/iio/accel/stk8ba50.c
@@ -95,12 +95,11 @@ struct stk8ba50_data {
u8 sample_rate_idx;
struct iio_trigger *dready_trig;
bool dready_trigger_on;
- /*
- * 3 x 16-bit channels (10-bit data, 6-bit padding) +
- * 1 x 16 padding +
- * 4 x 16 64-bit timestamp
- */
- s16 buffer[8];
+ /* Ensure timestamp is naturally aligned */
+ struct {
+ s16 chans[3];
+ s64 timetamp __aligned(8);
+ } scan;
};
#define STK8BA50_ACCEL_CHANNEL(index, reg, axis) { \
@@ -330,7 +329,7 @@ static irqreturn_t stk8ba50_trigger_handler(int irq, void *p)
ret = i2c_smbus_read_i2c_block_data(data->client,
STK8BA50_REG_XOUT,
STK8BA50_ALL_CHANNEL_SIZE,
- (u8 *)data->buffer);
+ (u8 *)data->scan.chans);
if (ret < STK8BA50_ALL_CHANNEL_SIZE) {
dev_err(&data->client->dev, "register read failed\n");
goto err;
@@ -343,10 +342,10 @@ static irqreturn_t stk8ba50_trigger_handler(int irq, void *p)
if (ret < 0)
goto err;
- data->buffer[i++] = ret;
+ data->scan.chans[i++] = ret;
}
}
- iio_push_to_buffers_with_timestamp(indio_dev, data->buffer,
+ iio_push_to_buffers_with_timestamp(indio_dev, &data->scan,
pf->timestamp);
err:
mutex_unlock(&data->lock);
--
2.30.2
From: Johan Hovold <[email protected]>
commit 3c0bb3107703d2c58f7a0a7a2060bb57bc120326 upstream.
The direction of the pipe argument must match the request-type direction
bit or control requests may fail depending on the host-controller-driver
implementation.
Fix the SET_ROM_WAIT_STATES request which erroneously used
usb_rcvctrlpipe().
Fixes: 88095e7b473a ("mmc: Add new VUB300 USB-to-SD/SDIO/MMC driver")
Cc: [email protected] # 3.0
Signed-off-by: Johan Hovold <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Ulf Hansson <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/mmc/host/vub300.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/mmc/host/vub300.c
+++ b/drivers/mmc/host/vub300.c
@@ -2294,7 +2294,7 @@ static int vub300_probe(struct usb_inter
if (retval < 0)
goto error5;
retval =
- usb_control_msg(vub300->udev, usb_rcvctrlpipe(vub300->udev, 0),
+ usb_control_msg(vub300->udev, usb_sndctrlpipe(vub300->udev, 0),
SET_ROM_WAIT_STATES,
USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
firmware_rom_wait_states, 0x0000, NULL, 0, HZ);
From: Miklos Szeredi <[email protected]>
commit 49221cf86d18bb66fe95d3338cb33bd4b9880ca5 upstream.
Don't allow userspace to report errors that could be kernel-internal.
Reported-by: Anatoly Trosinenko <[email protected]>
Fixes: 334f485df85a ("[PATCH] FUSE - device functions")
Cc: <[email protected]> # v2.6.14
Signed-off-by: Miklos Szeredi <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/fuse/dev.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/fs/fuse/dev.c
+++ b/fs/fuse/dev.c
@@ -1931,7 +1931,7 @@ static ssize_t fuse_dev_do_write(struct
}
err = -EINVAL;
- if (oh.error <= -1000 || oh.error > 0)
+ if (oh.error <= -512 || oh.error > 0)
goto err_finish;
spin_lock(&fpq->lock);
From: Zou Wei <[email protected]>
[ Upstream commit 009fc857c5f6fda81f2f7dd851b2d54193a8e733 ]
This module's remove path calls del_timer(). However, that function
does not wait until the timer handler finishes. This means that the
timer handler may still be running after the driver's remove function
has finished, which would result in a use-after-free.
Fix by calling del_timer_sync(), which makes sure the timer handler
has finished, and unable to re-schedule itself.
Reported-by: Hulk Robot <[email protected]>
Signed-off-by: Zou Wei <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/isdn/hardware/mISDN/hfcpci.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/isdn/hardware/mISDN/hfcpci.c b/drivers/isdn/hardware/mISDN/hfcpci.c
index ff48da61c94c..89cf1d695a01 100644
--- a/drivers/isdn/hardware/mISDN/hfcpci.c
+++ b/drivers/isdn/hardware/mISDN/hfcpci.c
@@ -2352,7 +2352,7 @@ static void __exit
HFC_cleanup(void)
{
if (timer_pending(&hfc_tl))
- del_timer(&hfc_tl);
+ del_timer_sync(&hfc_tl);
pci_unregister_driver(&hfc_driver);
}
--
2.30.2
From: Nuno Sa <[email protected]>
[ Upstream commit d877539ad8e8fdde9af69887055fec6402be1a13 ]
On an IRQ handler we should not return normal error codes as 'irqreturn_t'
is expected.
Not necessarily stable material as the old check cannot fail, so it's a bug
we can not hit.
Fixes: ccd2b52f4ac69 ("staging:iio: Add common ADIS library")
Reviewed-by: Alexandru Ardelean <[email protected]>
Signed-off-by: Nuno Sa <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jonathan Cameron <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/iio/imu/adis_buffer.c | 3 ---
1 file changed, 3 deletions(-)
diff --git a/drivers/iio/imu/adis_buffer.c b/drivers/iio/imu/adis_buffer.c
index 9de553e8c214..625f54d9e382 100644
--- a/drivers/iio/imu/adis_buffer.c
+++ b/drivers/iio/imu/adis_buffer.c
@@ -83,9 +83,6 @@ static irqreturn_t adis_trigger_handler(int irq, void *p)
struct adis *adis = iio_device_get_drvdata(indio_dev);
int ret;
- if (!adis->buffer)
- return -ENOMEM;
-
if (adis->data->has_paging) {
mutex_lock(&adis->txrx_lock);
if (adis->current_page != 0) {
--
2.30.2
From: Dmitry Osipenko <[email protected]>
commit f6eb84fa596abf28959fc7e0b626f925eb1196c7 upstream.
The driver_name="tegra" is now required by the newer ALSA UCMs, otherwise
Tegra UCMs don't match by the path/name.
All Tegra machine drivers are specifying the card's name, but it has no
effect if model name is specified in the device-tree since it overrides
the card's name. We need to set the driver_name to "tegra" in order to
get a usable lookup path for the updated ALSA UCMs. The new UCM lookup
path has a form of driver_name/card_name.
The old lookup paths that are based on driver module name continue to
work as before. Note that UCM matching never worked for Tegra ASoC drivers
if they were compiled as built-in, this is fixed by supporting the new
naming scheme.
Cc: [email protected]
Signed-off-by: Dmitry Osipenko <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
sound/soc/tegra/tegra_alc5632.c | 1 +
sound/soc/tegra/tegra_max98090.c | 1 +
sound/soc/tegra/tegra_rt5640.c | 1 +
sound/soc/tegra/tegra_rt5677.c | 1 +
sound/soc/tegra/tegra_wm8753.c | 1 +
sound/soc/tegra/tegra_wm8903.c | 1 +
sound/soc/tegra/tegra_wm9712.c | 1 +
sound/soc/tegra/trimslice.c | 1 +
8 files changed, 8 insertions(+)
--- a/sound/soc/tegra/tegra_alc5632.c
+++ b/sound/soc/tegra/tegra_alc5632.c
@@ -149,6 +149,7 @@ static struct snd_soc_dai_link tegra_alc
static struct snd_soc_card snd_soc_tegra_alc5632 = {
.name = "tegra-alc5632",
+ .driver_name = "tegra",
.owner = THIS_MODULE,
.remove = tegra_alc5632_card_remove,
.dai_link = &tegra_alc5632_dai,
--- a/sound/soc/tegra/tegra_max98090.c
+++ b/sound/soc/tegra/tegra_max98090.c
@@ -205,6 +205,7 @@ static struct snd_soc_dai_link tegra_max
static struct snd_soc_card snd_soc_tegra_max98090 = {
.name = "tegra-max98090",
+ .driver_name = "tegra",
.owner = THIS_MODULE,
.remove = tegra_max98090_card_remove,
.dai_link = &tegra_max98090_dai,
--- a/sound/soc/tegra/tegra_rt5640.c
+++ b/sound/soc/tegra/tegra_rt5640.c
@@ -150,6 +150,7 @@ static struct snd_soc_dai_link tegra_rt5
static struct snd_soc_card snd_soc_tegra_rt5640 = {
.name = "tegra-rt5640",
+ .driver_name = "tegra",
.owner = THIS_MODULE,
.remove = tegra_rt5640_card_remove,
.dai_link = &tegra_rt5640_dai,
--- a/sound/soc/tegra/tegra_rt5677.c
+++ b/sound/soc/tegra/tegra_rt5677.c
@@ -198,6 +198,7 @@ static struct snd_soc_dai_link tegra_rt5
static struct snd_soc_card snd_soc_tegra_rt5677 = {
.name = "tegra-rt5677",
+ .driver_name = "tegra",
.owner = THIS_MODULE,
.remove = tegra_rt5677_card_remove,
.dai_link = &tegra_rt5677_dai,
--- a/sound/soc/tegra/tegra_wm8753.c
+++ b/sound/soc/tegra/tegra_wm8753.c
@@ -110,6 +110,7 @@ static struct snd_soc_dai_link tegra_wm8
static struct snd_soc_card snd_soc_tegra_wm8753 = {
.name = "tegra-wm8753",
+ .driver_name = "tegra",
.owner = THIS_MODULE,
.dai_link = &tegra_wm8753_dai,
.num_links = 1,
--- a/sound/soc/tegra/tegra_wm8903.c
+++ b/sound/soc/tegra/tegra_wm8903.c
@@ -227,6 +227,7 @@ static struct snd_soc_dai_link tegra_wm8
static struct snd_soc_card snd_soc_tegra_wm8903 = {
.name = "tegra-wm8903",
+ .driver_name = "tegra",
.owner = THIS_MODULE,
.dai_link = &tegra_wm8903_dai,
.num_links = 1,
--- a/sound/soc/tegra/tegra_wm9712.c
+++ b/sound/soc/tegra/tegra_wm9712.c
@@ -59,6 +59,7 @@ static struct snd_soc_dai_link tegra_wm9
static struct snd_soc_card snd_soc_tegra_wm9712 = {
.name = "tegra-wm9712",
+ .driver_name = "tegra",
.owner = THIS_MODULE,
.dai_link = &tegra_wm9712_dai,
.num_links = 1,
--- a/sound/soc/tegra/trimslice.c
+++ b/sound/soc/tegra/trimslice.c
@@ -103,6 +103,7 @@ static struct snd_soc_dai_link trimslice
static struct snd_soc_card snd_soc_trimslice = {
.name = "tegra-trimslice",
+ .driver_name = "tegra",
.owner = THIS_MODULE,
.dai_link = &trimslice_tlv320aic23_dai,
.num_links = 1,
From: Marcelo Ricardo Leitner <[email protected]>
[ Upstream commit 50619dbf8db77e98d821d615af4f634d08e22698 ]
The first chunk in a packet is ensured to be present at the beginning of
sctp_rcv(), as a packet needs to have at least 1 chunk. But the second
one, may not be completely available and ch->length can be over
uninitialized memory.
Fix here is by only trying to walk on the next chunk if there is enough to
hold at least the header, and then proceed with the ch->length validation
that is already there.
Reported-by: Ilja Van Sprundel <[email protected]>
Signed-off-by: Marcelo Ricardo Leitner <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/sctp/input.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/net/sctp/input.c b/net/sctp/input.c
index 9fa89a35afcd..9dcc18db9918 100644
--- a/net/sctp/input.c
+++ b/net/sctp/input.c
@@ -1086,7 +1086,7 @@ static struct sctp_association *__sctp_rcv_walk_lookup(struct net *net,
ch = (sctp_chunkhdr_t *) ch_end;
chunk_num++;
- } while (ch_end < skb_tail_pointer(skb));
+ } while (ch_end + sizeof(*ch) < skb_tail_pointer(skb));
return asoc;
}
--
2.30.2
From: Timo Sigurdsson <[email protected]>
commit f6bca4d91b2ea052e917cca3f9d866b5cc1d500a upstream.
DIPM is unsupported or broken on sunxi. Trying to enable the power
management policy med_power_with_dipm on an Allwinner A20 SoC based board
leads to immediate I/O errors and the attached SATA disk disappears from
the /dev filesystem. A reset (power cycle) is required to make the SATA
controller or disk work again. The A10 and A20 SoC data sheets and manuals
don't mention DIPM at all [1], so it's fair to assume that it's simply not
supported. But even if it was, it should be considered broken and best be
disabled in the ahci_sunxi driver.
[1] https://github.com/allwinner-zh/documents/tree/master/
Fixes: c5754b5220f0 ("ARM: sunxi: Add support for Allwinner SUNXi SoCs sata to ahci_platform")
Cc: [email protected]
Signed-off-by: Timo Sigurdsson <[email protected]>
Tested-by: Timo Sigurdsson <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jens Axboe <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/ata/ahci_sunxi.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/ata/ahci_sunxi.c
+++ b/drivers/ata/ahci_sunxi.c
@@ -165,7 +165,7 @@ static void ahci_sunxi_start_engine(stru
}
static const struct ata_port_info ahci_sunxi_port_info = {
- .flags = AHCI_FLAG_COMMON | ATA_FLAG_NCQ,
+ .flags = AHCI_FLAG_COMMON | ATA_FLAG_NCQ | ATA_FLAG_NO_DIPM,
.pio_mask = ATA_PIO4,
.udma_mask = ATA_UDMA6,
.port_ops = &ahci_platform_ops,
From: Jonathan Cameron <[email protected]>
[ Upstream commit fc36da3131a747a9367a05caf06de19be1bcc972 ]
To make code more readable, use a structure to express the channel
layout and ensure the timestamp is 8 byte aligned.
Found during an audit of all calls of this function.
Fixes: b9a6a237ffc9 ("iio:bma180: Drop _update_scan_mode()")
Signed-off-by: Jonathan Cameron <[email protected]>
Cc: Peter Meerwald <[email protected]>
Reviewed-by: Andy Shevchenko <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/iio/accel/bma180.c | 10 +++++++---
1 file changed, 7 insertions(+), 3 deletions(-)
diff --git a/drivers/iio/accel/bma180.c b/drivers/iio/accel/bma180.c
index f04b88406995..68c9e5478fec 100644
--- a/drivers/iio/accel/bma180.c
+++ b/drivers/iio/accel/bma180.c
@@ -120,7 +120,11 @@ struct bma180_data {
int scale;
int bw;
bool pmode;
- u8 buff[16]; /* 3x 16-bit + 8-bit + padding + timestamp */
+ /* Ensure timestamp is naturally aligned */
+ struct {
+ s16 chan[4];
+ s64 timestamp __aligned(8);
+ } scan;
};
enum bma180_chan {
@@ -666,12 +670,12 @@ static irqreturn_t bma180_trigger_handler(int irq, void *p)
mutex_unlock(&data->mutex);
goto err;
}
- ((s16 *)data->buff)[i++] = ret;
+ data->scan.chan[i++] = ret;
}
mutex_unlock(&data->mutex);
- iio_push_to_buffers_with_timestamp(indio_dev, data->buff, time_ns);
+ iio_push_to_buffers_with_timestamp(indio_dev, &data->scan, time_ns);
err:
iio_trigger_notify_done(indio_dev->trig);
--
2.30.2
From: Thadeu Lima de Souza Cascardo <[email protected]>
commit d5f9023fa61ee8b94f37a93f08e94b136cf1e463 upstream.
can_rx_register() callbacks may be called concurrently to the call to
can_rx_unregister(). The callbacks and callback data, though, are
protected by RCU and the struct sock reference count.
So the callback data is really attached to the life of sk, meaning
that it should be released on sk_destruct. However, bcm_remove_op()
calls tasklet_kill(), and RCU callbacks may be called under RCU
softirq, so that cannot be used on kernels before the introduction of
HRTIMER_MODE_SOFT.
However, bcm_rx_handler() is called under RCU protection, so after
calling can_rx_unregister(), we may call synchronize_rcu() in order to
wait for any RCU read-side critical sections to finish. That is,
bcm_rx_handler() won't be called anymore for those ops. So, we only
free them, after we do that synchronize_rcu().
Fixes: ffd980f976e7 ("[CAN]: Add broadcast manager (bcm) protocol")
Link: https://lore.kernel.org/r/[email protected]
Cc: linux-stable <[email protected]>
Reported-by: [email protected]
Reported-by: Norbert Slusarek <[email protected]>
Signed-off-by: Thadeu Lima de Souza Cascardo <[email protected]>
Acked-by: Oliver Hartkopp <[email protected]>
Signed-off-by: Marc Kleine-Budde <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/can/bcm.c | 7 ++++++-
1 file changed, 6 insertions(+), 1 deletion(-)
--- a/net/can/bcm.c
+++ b/net/can/bcm.c
@@ -813,6 +813,7 @@ static int bcm_delete_rx_op(struct list_
bcm_rx_handler, op);
list_del(&op->list);
+ synchronize_rcu();
bcm_remove_op(op);
return 1; /* done */
}
@@ -1538,9 +1539,13 @@ static int bcm_release(struct socket *so
REGMASK(op->can_id),
bcm_rx_handler, op);
- bcm_remove_op(op);
}
+ synchronize_rcu();
+
+ list_for_each_entry_safe(op, next, &bo->rx_ops, list)
+ bcm_remove_op(op);
+
/* remove procfs entry */
if (proc_dir && bo->bcm_proc_read)
remove_proc_entry(bo->procname, proc_dir);
From: Jonathan Cameron <[email protected]>
[ Upstream commit f40a71ffec808e7e51848f63f0c0d3c32d65081b ]
To make code more readable, use a structure to express the channel
layout and ensure the timestamp is 8 byte aligned.
Found during an audit of all calls of this function.
Fixes: 95c12bba51c3 ("iio: accel: Add buffer mode for Sensortek STK8312")
Signed-off-by: Jonathan Cameron <[email protected]>
Reviewed-by: Andy Shevchenko <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/iio/accel/stk8312.c | 12 ++++++++----
1 file changed, 8 insertions(+), 4 deletions(-)
diff --git a/drivers/iio/accel/stk8312.c b/drivers/iio/accel/stk8312.c
index 85fe7f7247c1..945c80183f35 100644
--- a/drivers/iio/accel/stk8312.c
+++ b/drivers/iio/accel/stk8312.c
@@ -107,7 +107,11 @@ struct stk8312_data {
u8 mode;
struct iio_trigger *dready_trig;
bool dready_trigger_on;
- s8 buffer[16]; /* 3x8-bit channels + 5x8 padding + 64-bit timestamp */
+ /* Ensure timestamp is naturally aligned */
+ struct {
+ s8 chans[3];
+ s64 timestamp __aligned(8);
+ } scan;
};
static IIO_CONST_ATTR(in_accel_scale_available, STK8312_SCALE_AVAIL);
@@ -444,7 +448,7 @@ static irqreturn_t stk8312_trigger_handler(int irq, void *p)
ret = i2c_smbus_read_i2c_block_data(data->client,
STK8312_REG_XOUT,
STK8312_ALL_CHANNEL_SIZE,
- data->buffer);
+ data->scan.chans);
if (ret < STK8312_ALL_CHANNEL_SIZE) {
dev_err(&data->client->dev, "register read failed\n");
mutex_unlock(&data->lock);
@@ -458,12 +462,12 @@ static irqreturn_t stk8312_trigger_handler(int irq, void *p)
mutex_unlock(&data->lock);
goto err;
}
- data->buffer[i++] = ret;
+ data->scan.chans[i++] = ret;
}
}
mutex_unlock(&data->lock);
- iio_push_to_buffers_with_timestamp(indio_dev, data->buffer,
+ iio_push_to_buffers_with_timestamp(indio_dev, &data->scan,
pf->timestamp);
err:
iio_trigger_notify_done(indio_dev->trig);
--
2.30.2
From: Al Cooper <[email protected]>
commit d0244847f9fc5e20df8b7483c8a4717fe0432d38 upstream.
When an eMMC device is being run in HS400 mode, any access to the
RPMB device will cause the error message "mmc1: Invalid UHS-I mode
selected". This happens as a result of tuning being disabled before
RPMB access and then re-enabled after the RPMB access is complete.
When tuning is re-enabled, the system has to switch from HS400
to HS200 to do the tuning and then back to HS400. As part of
sequence to switch from HS400 to HS200 the system is temporarily
put into HS mode. When switching to HS mode, sdhci_get_preset_value()
is called and does not have support for HS mode and prints the warning
message and returns the preset for SDR12. The fix is to add support
for MMC and SD HS modes to sdhci_get_preset_value().
This can be reproduced on any system running eMMC in HS400 mode
(not HS400ES) by using the "mmc" utility to run the following
command: "mmc rpmb read-counter /dev/mmcblk0rpmb".
Signed-off-by: Al Cooper <[email protected]>
Acked-by: Adrian Hunter <[email protected]>
Fixes: 52983382c74f ("mmc: sdhci: enhance preset value function")
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Ulf Hansson <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/mmc/host/sdhci.c | 4 ++++
drivers/mmc/host/sdhci.h | 1 +
2 files changed, 5 insertions(+)
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -1134,6 +1134,10 @@ static u16 sdhci_get_preset_value(struct
u16 preset = 0;
switch (host->timing) {
+ case MMC_TIMING_MMC_HS:
+ case MMC_TIMING_SD_HS:
+ preset = sdhci_readw(host, SDHCI_PRESET_FOR_HIGH_SPEED);
+ break;
case MMC_TIMING_UHS_SDR12:
preset = sdhci_readw(host, SDHCI_PRESET_FOR_SDR12);
break;
--- a/drivers/mmc/host/sdhci.h
+++ b/drivers/mmc/host/sdhci.h
@@ -232,6 +232,7 @@
/* 60-FB reserved */
+#define SDHCI_PRESET_FOR_HIGH_SPEED 0x64
#define SDHCI_PRESET_FOR_SDR12 0x66
#define SDHCI_PRESET_FOR_SDR25 0x68
#define SDHCI_PRESET_FOR_SDR50 0x6A
From: Johan Hovold <[email protected]>
commit b4bb4d425b7b02424afea2dfdcd77b3b4794175e upstream.
The direction of the pipe argument must match the request-type direction
bit or control requests may fail depending on the host-controller-driver
implementation.
Control transfers without a data stage are treated as OUT requests by
the USB stack and should be using usb_sndctrlpipe(). Failing to do so
will now trigger a warning.
Fix the single zero-length control request which was using the
read-register helper, and update the helper so that zero-length reads
fail with an error message instead.
Fixes: 6a7eba24e4f0 ("V4L/DVB (8157): gspca: all subdrivers")
Cc: [email protected] # 2.6.27
Signed-off-by: Johan Hovold <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/media/usb/gspca/sunplus.c | 8 ++++++--
1 file changed, 6 insertions(+), 2 deletions(-)
--- a/drivers/media/usb/gspca/sunplus.c
+++ b/drivers/media/usb/gspca/sunplus.c
@@ -255,6 +255,10 @@ static void reg_r(struct gspca_dev *gspc
PERR("reg_r: buffer overflow\n");
return;
}
+ if (len == 0) {
+ PERR("reg_r: zero-length read\n");
+ return;
+ }
if (gspca_dev->usb_err < 0)
return;
ret = usb_control_msg(gspca_dev->dev,
@@ -263,7 +267,7 @@ static void reg_r(struct gspca_dev *gspc
USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
0, /* value */
index,
- len ? gspca_dev->usb_buf : NULL, len,
+ gspca_dev->usb_buf, len,
500);
if (ret < 0) {
pr_err("reg_r err %d\n", ret);
@@ -739,7 +743,7 @@ static int sd_start(struct gspca_dev *gs
case MegaImageVI:
reg_w_riv(gspca_dev, 0xf0, 0, 0);
spca504B_WaitCmdStatus(gspca_dev);
- reg_r(gspca_dev, 0xf0, 4, 0);
+ reg_w_riv(gspca_dev, 0xf0, 4, 0);
spca504B_WaitCmdStatus(gspca_dev);
break;
default:
From: Yu Liu <[email protected]>
[ Upstream commit 4ef36a52b0e47c80bbfd69c0cce61c7ae9f541ed ]
0x2B, 0x31 and 0x33 are reserved for future use but were not present in
the HCI to MGMT conversion table, this caused the conversion to be
incorrect for the HCI status code greater than 0x2A.
Reviewed-by: Miao-chen Chou <[email protected]>
Signed-off-by: Yu Liu <[email protected]>
Signed-off-by: Marcel Holtmann <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/bluetooth/mgmt.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/net/bluetooth/mgmt.c b/net/bluetooth/mgmt.c
index ee761fb09559..4a95c89d8506 100644
--- a/net/bluetooth/mgmt.c
+++ b/net/bluetooth/mgmt.c
@@ -212,12 +212,15 @@ static u8 mgmt_status_table[] = {
MGMT_STATUS_TIMEOUT, /* Instant Passed */
MGMT_STATUS_NOT_SUPPORTED, /* Pairing Not Supported */
MGMT_STATUS_FAILED, /* Transaction Collision */
+ MGMT_STATUS_FAILED, /* Reserved for future use */
MGMT_STATUS_INVALID_PARAMS, /* Unacceptable Parameter */
MGMT_STATUS_REJECTED, /* QoS Rejected */
MGMT_STATUS_NOT_SUPPORTED, /* Classification Not Supported */
MGMT_STATUS_REJECTED, /* Insufficient Security */
MGMT_STATUS_INVALID_PARAMS, /* Parameter Out Of Range */
+ MGMT_STATUS_FAILED, /* Reserved for future use */
MGMT_STATUS_BUSY, /* Role Switch Pending */
+ MGMT_STATUS_FAILED, /* Reserved for future use */
MGMT_STATUS_FAILED, /* Slot Violation */
MGMT_STATUS_FAILED, /* Role Switch Failed */
MGMT_STATUS_INVALID_PARAMS, /* EIR Too Large */
--
2.30.2
From: Hou Tao <[email protected]>
commit b6e58b5466b2959f83034bead2e2e1395cca8aeb upstream.
remove_raw() in dm_btree_remove() may fail due to IO read error
(e.g. read the content of origin block fails during shadowing),
and the value of shadow_spine::root is uninitialized, but
the uninitialized value is still assign to new_root in the
end of dm_btree_remove().
For dm-thin, the value of pmd->details_root or pmd->root will become
an uninitialized value, so if trying to read details_info tree again
out-of-bound memory may occur as showed below:
general protection fault, probably for non-canonical address 0x3fdcb14c8d7520
CPU: 4 PID: 515 Comm: dmsetup Not tainted 5.13.0-rc6
Hardware name: QEMU Standard PC
RIP: 0010:metadata_ll_load_ie+0x14/0x30
Call Trace:
sm_metadata_count_is_more_than_one+0xb9/0xe0
dm_tm_shadow_block+0x52/0x1c0
shadow_step+0x59/0xf0
remove_raw+0xb2/0x170
dm_btree_remove+0xf4/0x1c0
dm_pool_delete_thin_device+0xc3/0x140
pool_message+0x218/0x2b0
target_message+0x251/0x290
ctl_ioctl+0x1c4/0x4d0
dm_ctl_ioctl+0xe/0x20
__x64_sys_ioctl+0x7b/0xb0
do_syscall_64+0x40/0xb0
entry_SYSCALL_64_after_hwframe+0x44/0xae
Fixing it by only assign new_root when removal succeeds
Signed-off-by: Hou Tao <[email protected]>
Cc: [email protected]
Signed-off-by: Mike Snitzer <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/md/persistent-data/dm-btree-remove.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/drivers/md/persistent-data/dm-btree-remove.c
+++ b/drivers/md/persistent-data/dm-btree-remove.c
@@ -549,7 +549,8 @@ int dm_btree_remove(struct dm_btree_info
delete_at(n, index);
}
- *new_root = shadow_root(&spine);
+ if (!r)
+ *new_root = shadow_root(&spine);
exit_shadow_spine(&spine);
return r;
From: Nathan Chancellor <[email protected]>
commit 015d98149b326e0f1f02e44413112ca8b4330543 upstream.
A change in clang 13 results in the __lwsync macro being defined as
__builtin_ppc_lwsync, which emits 'lwsync' or 'msync' depending on what
the target supports. This breaks the build because of -Werror in
arch/powerpc, along with thousands of warnings:
In file included from arch/powerpc/kernel/pmc.c:12:
In file included from include/linux/bug.h:5:
In file included from arch/powerpc/include/asm/bug.h:109:
In file included from include/asm-generic/bug.h:20:
In file included from include/linux/kernel.h:12:
In file included from include/linux/bitops.h:32:
In file included from arch/powerpc/include/asm/bitops.h:62:
arch/powerpc/include/asm/barrier.h:49:9: error: '__lwsync' macro redefined [-Werror,-Wmacro-redefined]
#define __lwsync() __asm__ __volatile__ (stringify_in_c(LWSYNC) : : :"memory")
^
<built-in>:308:9: note: previous definition is here
#define __lwsync __builtin_ppc_lwsync
^
1 error generated.
Undefine this macro so that the runtime patching introduced by
commit 2d1b2027626d ("powerpc: Fixup lwsync at runtime") continues to
work properly with clang and the build no longer breaks.
Cc: [email protected]
Signed-off-by: Nathan Chancellor <[email protected]>
Reviewed-by: Nick Desaulniers <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://github.com/ClangBuiltLinux/linux/issues/1386
Link: https://github.com/llvm/llvm-project/commit/62b5df7fe2b3fda1772befeda15598fbef96a614
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/powerpc/include/asm/barrier.h | 2 ++
1 file changed, 2 insertions(+)
--- a/arch/powerpc/include/asm/barrier.h
+++ b/arch/powerpc/include/asm/barrier.h
@@ -43,6 +43,8 @@
# define SMPWMB eieio
#endif
+/* clang defines this macro for a builtin, which will not work with runtime patching */
+#undef __lwsync
#define __lwsync() __asm__ __volatile__ (stringify_in_c(LWSYNC) : : :"memory")
#define dma_rmb() __lwsync()
#define dma_wmb() __asm__ __volatile__ (stringify_in_c(SMPWMB) : : :"memory")
From: Yang Yingliang <[email protected]>
[ Upstream commit 20f1932e2282c58cb5ac59517585206cf5b385ae ]
It will cause null-ptr-deref if platform_get_resource() returns NULL,
we need check the return value.
Signed-off-by: Yang Yingliang <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/micrel/ks8842.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/drivers/net/ethernet/micrel/ks8842.c b/drivers/net/ethernet/micrel/ks8842.c
index cb0102dd7f70..d691c33dffc6 100644
--- a/drivers/net/ethernet/micrel/ks8842.c
+++ b/drivers/net/ethernet/micrel/ks8842.c
@@ -1150,6 +1150,10 @@ static int ks8842_probe(struct platform_device *pdev)
unsigned i;
iomem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!iomem) {
+ dev_err(&pdev->dev, "Invalid resource\n");
+ return -EINVAL;
+ }
if (!request_mem_region(iomem->start, resource_size(iomem), DRV_NAME))
goto err_mem_region;
--
2.30.2
From: Lv Yunlong <[email protected]>
commit 9272e5d0028d45a3b45b58c9255e6e0df53f7ad9 upstream.
In the out_err_bus_register error branch of tpci200_pci_probe,
tpci200->info->cfg_regs is freed by tpci200_uninstall()->
tpci200_unregister()->pci_iounmap(..,tpci200->info->cfg_regs)
in the first time.
But later, iounmap() is called to free tpci200->info->cfg_regs
again.
My patch sets tpci200->info->cfg_regs to NULL after tpci200_uninstall()
to avoid the double free.
Fixes: cea2f7cdff2af ("Staging: ipack/bridges/tpci200: Use the TPCI200 in big endian mode")
Cc: stable <[email protected]>
Acked-by: Samuel Iglesias Gonsalvez <[email protected]>
Signed-off-by: Lv Yunlong <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/ipack/carriers/tpci200.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
--- a/drivers/ipack/carriers/tpci200.c
+++ b/drivers/ipack/carriers/tpci200.c
@@ -591,8 +591,11 @@ static int tpci200_pci_probe(struct pci_
out_err_bus_register:
tpci200_uninstall(tpci200);
+ /* tpci200->info->cfg_regs is unmapped in tpci200_uninstall */
+ tpci200->info->cfg_regs = NULL;
out_err_install:
- iounmap(tpci200->info->cfg_regs);
+ if (tpci200->info->cfg_regs)
+ iounmap(tpci200->info->cfg_regs);
out_err_ioremap:
pci_release_region(pdev, TPCI200_CFG_MEM_BAR);
out_err_pci_request:
From: Sean Christopherson <[email protected]>
commit 4bf48e3c0aafd32b960d341c4925b48f416f14a5 upstream.
Ignore the guest MAXPHYADDR reported by CPUID.0x8000_0008 if TDP, i.e.
NPT, is disabled, and instead use the host's MAXPHYADDR. Per AMD'S APM:
Maximum guest physical address size in bits. This number applies only
to guests using nested paging. When this field is zero, refer to the
PhysAddrSize field for the maximum guest physical address size.
Fixes: 24c82e576b78 ("KVM: Sanitize cpuid")
Cc: [email protected]
Signed-off-by: Sean Christopherson <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/kvm/cpuid.c | 8 +++++++-
1 file changed, 7 insertions(+), 1 deletion(-)
--- a/arch/x86/kvm/cpuid.c
+++ b/arch/x86/kvm/cpuid.c
@@ -611,8 +611,14 @@ static inline int __do_cpuid_ent(struct
unsigned virt_as = max((entry->eax >> 8) & 0xff, 48U);
unsigned phys_as = entry->eax & 0xff;
- if (!g_phys_as)
+ /*
+ * Use bare metal's MAXPHADDR if the CPU doesn't report guest
+ * MAXPHYADDR separately, or if TDP (NPT) is disabled, as the
+ * guest version "applies only to guests using nested paging".
+ */
+ if (!g_phys_as || !tdp_enabled)
g_phys_as = phys_as;
+
entry->eax = g_phys_as | (virt_as << 8);
entry->edx = 0;
/*
From: Christophe JAILLET <[email protected]>
[ Upstream commit 31a9a318255960d32ae183e95d0999daf2418608 ]
A 'request_irq()' call is not balanced by a corresponding 'free_irq()' in
the error handling path, as already done in the remove function.
Add it.
Fixes: 9842c38e9176 ("kfifo: fix warn_unused_result")
Reviewed-by: Jiri Slaby <[email protected]>
Signed-off-by: Christophe JAILLET <[email protected]>
Link: https://lore.kernel.org/r/4f0d2b3038e82f081d370ccb0cade3ad88463fe7.1620580838.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/tty/nozomi.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/tty/nozomi.c b/drivers/tty/nozomi.c
index 5cc80b80c82b..880cfc780e67 100644
--- a/drivers/tty/nozomi.c
+++ b/drivers/tty/nozomi.c
@@ -1479,6 +1479,7 @@ err_free_tty:
tty_unregister_device(ntty_driver, dc->index_start + i);
tty_port_destroy(&dc->port[i].port);
}
+ free_irq(pdev->irq, dc);
err_free_kfifo:
for (i = 0; i < MAX_PORT; i++)
kfifo_free(&dc->port[i].fifo_ul);
--
2.30.2
From: Lee Gibson <[email protected]>
[ Upstream commit d10a87a3535cce2b890897914f5d0d83df669c63 ]
Function wl1251_cmd_scan calls memcpy without checking the length.
Harden by checking the length is within the maximum allowed size.
Signed-off-by: Lee Gibson <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/ti/wl1251/cmd.c | 9 ++++++---
1 file changed, 6 insertions(+), 3 deletions(-)
diff --git a/drivers/net/wireless/ti/wl1251/cmd.c b/drivers/net/wireless/ti/wl1251/cmd.c
index ede31f048ef9..247f4310a38f 100644
--- a/drivers/net/wireless/ti/wl1251/cmd.c
+++ b/drivers/net/wireless/ti/wl1251/cmd.c
@@ -465,9 +465,12 @@ int wl1251_cmd_scan(struct wl1251 *wl, u8 *ssid, size_t ssid_len,
cmd->channels[i].channel = channels[i]->hw_value;
}
- cmd->params.ssid_len = ssid_len;
- if (ssid)
- memcpy(cmd->params.ssid, ssid, ssid_len);
+ if (ssid) {
+ int len = clamp_val(ssid_len, 0, IEEE80211_MAX_SSID_LEN);
+
+ cmd->params.ssid_len = len;
+ memcpy(cmd->params.ssid, ssid, len);
+ }
ret = wl1251_cmd_send(wl, CMD_SCAN, cmd, sizeof(*cmd));
if (ret < 0) {
--
2.30.2
From: Benjamin Drung <[email protected]>
commit 4c6e0976295add7f0ed94d276c04a3d6f1ea8f83 upstream.
The Elgato Cam Link 4K HDMI video capture card reports to support three
different pixel formats, where the first format depends on the connected
HDMI device.
```
$ v4l2-ctl -d /dev/video0 --list-formats-ext
ioctl: VIDIOC_ENUM_FMT
Type: Video Capture
[0]: 'NV12' (Y/CbCr 4:2:0)
Size: Discrete 3840x2160
Interval: Discrete 0.033s (29.970 fps)
[1]: 'NV12' (Y/CbCr 4:2:0)
Size: Discrete 3840x2160
Interval: Discrete 0.033s (29.970 fps)
[2]: 'YU12' (Planar YUV 4:2:0)
Size: Discrete 3840x2160
Interval: Discrete 0.033s (29.970 fps)
```
Changing the pixel format to anything besides the first pixel format
does not work:
```
$ v4l2-ctl -d /dev/video0 --try-fmt-video pixelformat=YU12
Format Video Capture:
Width/Height : 3840/2160
Pixel Format : 'NV12' (Y/CbCr 4:2:0)
Field : None
Bytes per Line : 3840
Size Image : 12441600
Colorspace : sRGB
Transfer Function : Rec. 709
YCbCr/HSV Encoding: Rec. 709
Quantization : Default (maps to Limited Range)
Flags :
```
User space applications like VLC might show an error message on the
terminal in that case:
```
libv4l2: error set_fmt gave us a different result than try_fmt!
```
Depending on the error handling of the user space applications, they
might display a distorted video, because they use the wrong pixel format
for decoding the stream.
The Elgato Cam Link 4K responds to the USB video probe
VS_PROBE_CONTROL/VS_COMMIT_CONTROL with a malformed data structure: The
second byte contains bFormatIndex (instead of being the second byte of
bmHint). The first byte is always zero. The third byte is always 1.
The firmware bug was reported to Elgato on 2020-12-01 and it was
forwarded by the support team to the developers as feature request.
There is no firmware update available since then. The latest firmware
for Elgato Cam Link 4K as of 2021-03-23 has MCU 20.02.19 and FPGA 67.
Therefore correct the malformed data structure for this device. The
change was successfully tested with VLC, OBS, and Chromium using
different pixel formats (YUYV, NV12, YU12), resolutions (3840x2160,
1920x1080), and frame rates (29.970 and 59.940 fps).
Cc: [email protected]
Signed-off-by: Benjamin Drung <[email protected]>
Signed-off-by: Laurent Pinchart <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/media/usb/uvc/uvc_video.c | 27 +++++++++++++++++++++++++++
1 file changed, 27 insertions(+)
--- a/drivers/media/usb/uvc/uvc_video.c
+++ b/drivers/media/usb/uvc/uvc_video.c
@@ -89,10 +89,37 @@ int uvc_query_ctrl(struct uvc_device *de
static void uvc_fixup_video_ctrl(struct uvc_streaming *stream,
struct uvc_streaming_control *ctrl)
{
+ static const struct usb_device_id elgato_cam_link_4k = {
+ USB_DEVICE(0x0fd9, 0x0066)
+ };
struct uvc_format *format = NULL;
struct uvc_frame *frame = NULL;
unsigned int i;
+ /*
+ * The response of the Elgato Cam Link 4K is incorrect: The second byte
+ * contains bFormatIndex (instead of being the second byte of bmHint).
+ * The first byte is always zero. The third byte is always 1.
+ *
+ * The UVC 1.5 class specification defines the first five bits in the
+ * bmHint bitfield. The remaining bits are reserved and should be zero.
+ * Therefore a valid bmHint will be less than 32.
+ *
+ * Latest Elgato Cam Link 4K firmware as of 2021-03-23 needs this fix.
+ * MCU: 20.02.19, FPGA: 67
+ */
+ if (usb_match_one_id(stream->dev->intf, &elgato_cam_link_4k) &&
+ ctrl->bmHint > 255) {
+ u8 corrected_format_index = ctrl->bmHint >> 8;
+
+ /* uvc_dbg(stream->dev, VIDEO,
+ "Correct USB video probe response from {bmHint: 0x%04x, bFormatIndex: %u} to {bmHint: 0x%04x, bFormatIndex: %u}\n",
+ ctrl->bmHint, ctrl->bFormatIndex,
+ 1, corrected_format_index); */
+ ctrl->bmHint = 1;
+ ctrl->bFormatIndex = corrected_format_index;
+ }
+
for (i = 0; i < stream->nformats; ++i) {
if (stream->format[i].index == ctrl->bFormatIndex) {
format = &stream->format[i];
From: Lai Jiangshan <[email protected]>
commit f85d40160691881a17a397c448d799dfc90987ba upstream.
When the host is using debug registers but the guest is not using them
nor is the guest in guest-debug state, the kvm code does not reset
the host debug registers before kvm_x86->run(). Rather, it relies on
the hardware vmentry instruction to automatically reset the dr7 registers
which ensures that the host breakpoints do not affect the guest.
This however violates the non-instrumentable nature around VM entry
and exit; for example, when a host breakpoint is set on vcpu->arch.cr2,
Another issue is consistency. When the guest debug registers are active,
the host breakpoints are reset before kvm_x86->run(). But when the
guest debug registers are inactive, the host breakpoints are delayed to
be disabled. The host tracing tools may see different results depending
on what the guest is doing.
To fix the problems, we clear %db7 unconditionally before kvm_x86->run()
if the host has set any breakpoints, no matter if the guest is using
them or not.
Signed-off-by: Lai Jiangshan <[email protected]>
Message-Id: <[email protected]>
Cc: [email protected]
[Only clear %db7 instead of reloading all debug registers. - Paolo]
Signed-off-by: Paolo Bonzini <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/kvm/x86.c | 2 ++
1 file changed, 2 insertions(+)
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -6724,6 +6724,8 @@ static int vcpu_enter_guest(struct kvm_v
set_debugreg(vcpu->arch.eff_db[3], 3);
set_debugreg(vcpu->arch.dr6, 6);
vcpu->arch.switch_db_regs &= ~KVM_DEBUGREG_RELOAD;
+ } else if (unlikely(hw_breakpoint_active())) {
+ set_debugreg(0, 7);
}
kvm_x86_ops->run(vcpu);
From: Oliver Hartkopp <[email protected]>
commit fb8696ab14adadb2e3f6c17c18ed26b3ecd96691 upstream.
can_can_gw_rcv() is called under RCU protection, so after calling
can_rx_unregister(), we have to call synchronize_rcu in order to wait
for any RCU read-side critical sections to finish before removing the
kmem_cache entry with the referenced gw job entry.
Link: https://lore.kernel.org/r/[email protected]
Fixes: c1aabdf379bc ("can-gw: add netlink based CAN routing")
Cc: linux-stable <[email protected]>
Signed-off-by: Oliver Hartkopp <[email protected]>
Signed-off-by: Marc Kleine-Budde <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/can/gw.c | 3 +++
1 file changed, 3 insertions(+)
--- a/net/can/gw.c
+++ b/net/can/gw.c
@@ -497,6 +497,7 @@ static int cgw_notifier(struct notifier_
if (gwj->src.dev == dev || gwj->dst.dev == dev) {
hlist_del(&gwj->list);
cgw_unregister_filter(gwj);
+ synchronize_rcu();
kmem_cache_free(cgw_cache, gwj);
}
}
@@ -941,6 +942,7 @@ static void cgw_remove_all_jobs(void)
hlist_for_each_entry_safe(gwj, nx, &cgw_list, list) {
hlist_del(&gwj->list);
cgw_unregister_filter(gwj);
+ synchronize_rcu();
kmem_cache_free(cgw_cache, gwj);
}
}
@@ -1008,6 +1010,7 @@ static int cgw_remove_job(struct sk_buff
hlist_del(&gwj->list);
cgw_unregister_filter(gwj);
+ synchronize_rcu();
kmem_cache_free(cgw_cache, gwj);
err = 0;
break;
From: Pavel Skripkin <[email protected]>
commit 9d574f985fe33efd6911f4d752de6f485a1ea732 upstream.
Avoid passing inode with
JFS_SBI(inode->i_sb)->ipimap == NULL to
diFree()[1]. GFP will appear:
struct inode *ipimap = JFS_SBI(ip->i_sb)->ipimap;
struct inomap *imap = JFS_IP(ipimap)->i_imap;
JFS_IP() will return invalid pointer when ipimap == NULL
Call Trace:
diFree+0x13d/0x2dc0 fs/jfs/jfs_imap.c:853 [1]
jfs_evict_inode+0x2c9/0x370 fs/jfs/inode.c:154
evict+0x2ed/0x750 fs/inode.c:578
iput_final fs/inode.c:1654 [inline]
iput.part.0+0x3fe/0x820 fs/inode.c:1680
iput+0x58/0x70 fs/inode.c:1670
Reported-and-tested-by: [email protected]
Signed-off-by: Pavel Skripkin <[email protected]>
Signed-off-by: Dave Kleikamp <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/jfs/inode.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/fs/jfs/inode.c
+++ b/fs/jfs/inode.c
@@ -160,7 +160,8 @@ void jfs_evict_inode(struct inode *inode
if (test_cflag(COMMIT_Freewmap, inode))
jfs_free_zero_link(inode);
- diFree(inode);
+ if (JFS_SBI(inode->i_sb)->ipimap)
+ diFree(inode);
/*
* Free the inode from the quota allocation.
From: Petr Pavlu <[email protected]>
commit 2253042d86f57d90a621ac2513a7a7a13afcf809 upstream.
When an IPMI watchdog timer is being stopped in ipmi_close() or
ipmi_ioctl(WDIOS_DISABLECARD), the current watchdog action is updated to
WDOG_TIMEOUT_NONE and _ipmi_set_timeout(IPMI_SET_TIMEOUT_NO_HB) is called
to install this action. The latter function ends up invoking
__ipmi_set_timeout() which makes the actual 'Set Watchdog Timer' IPMI
request.
For IPMI 1.0, this operation results in fully stopping the watchdog timer.
For IPMI >= 1.5, function __ipmi_set_timeout() always specifies the "don't
stop" flag in the prepared 'Set Watchdog Timer' IPMI request. This causes
that the watchdog timer has its action correctly updated to 'none' but the
timer continues to run. A problem is that IPMI firmware can then still log
an expiration event when the configured timeout is reached, which is
unexpected because the watchdog timer was requested to be stopped.
The patch fixes this problem by not setting the "don't stop" flag in
__ipmi_set_timeout() when the current action is WDOG_TIMEOUT_NONE which
results in stopping the watchdog timer. This makes the behaviour for
IPMI >= 1.5 consistent with IPMI 1.0. It also matches the logic in
__ipmi_heartbeat() which does not allow to reset the watchdog if the
current action is WDOG_TIMEOUT_NONE as that would start the timer.
Signed-off-by: Petr Pavlu <[email protected]>
Message-Id: <[email protected]>
Cc: [email protected]
Signed-off-by: Corey Minyard <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/char/ipmi/ipmi_watchdog.c | 22 ++++++++++++----------
1 file changed, 12 insertions(+), 10 deletions(-)
--- a/drivers/char/ipmi/ipmi_watchdog.c
+++ b/drivers/char/ipmi/ipmi_watchdog.c
@@ -393,16 +393,18 @@ static int i_ipmi_set_timeout(struct ipm
data[0] = 0;
WDOG_SET_TIMER_USE(data[0], WDOG_TIMER_USE_SMS_OS);
- if ((ipmi_version_major > 1)
- || ((ipmi_version_major == 1) && (ipmi_version_minor >= 5))) {
- /* This is an IPMI 1.5-only feature. */
- data[0] |= WDOG_DONT_STOP_ON_SET;
- } else if (ipmi_watchdog_state != WDOG_TIMEOUT_NONE) {
- /*
- * In ipmi 1.0, setting the timer stops the watchdog, we
- * need to start it back up again.
- */
- hbnow = 1;
+ if (ipmi_watchdog_state != WDOG_TIMEOUT_NONE) {
+ if ((ipmi_version_major > 1) ||
+ ((ipmi_version_major == 1) && (ipmi_version_minor >= 5))) {
+ /* This is an IPMI 1.5-only feature. */
+ data[0] |= WDOG_DONT_STOP_ON_SET;
+ } else {
+ /*
+ * In ipmi 1.0, setting the timer stops the watchdog, we
+ * need to start it back up again.
+ */
+ hbnow = 1;
+ }
}
data[1] = 0;
From: Bibo Mao <[email protected]>
[ Upstream commit 33ae8f801ad8bec48e886d368739feb2816478f2 ]
If multiple threads are accessing the same huge page at the same
time, hugetlb_cow will be called if one thread write the COW huge
page. And function huge_ptep_clear_flush is called to notify other
threads to clear the huge pte tlb entry. The other threads clear
the huge pte tlb entry and reload it from page table, the reload
huge pte entry may be old.
This patch fixes this issue on mips platform, and it clears huge
pte entry before notifying other threads to flush current huge
page entry, it is similar with other architectures.
Signed-off-by: Bibo Mao <[email protected]>
Signed-off-by: Thomas Bogendoerfer <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/mips/include/asm/hugetlb.h | 8 +++++++-
1 file changed, 7 insertions(+), 1 deletion(-)
diff --git a/arch/mips/include/asm/hugetlb.h b/arch/mips/include/asm/hugetlb.h
index 982bc0685330..4747a4694669 100644
--- a/arch/mips/include/asm/hugetlb.h
+++ b/arch/mips/include/asm/hugetlb.h
@@ -67,7 +67,13 @@ static inline pte_t huge_ptep_get_and_clear(struct mm_struct *mm,
static inline void huge_ptep_clear_flush(struct vm_area_struct *vma,
unsigned long addr, pte_t *ptep)
{
- flush_tlb_page(vma, addr & huge_page_mask(hstate_vma(vma)));
+ /*
+ * clear the huge pte entry firstly, so that the other smp threads will
+ * not get old pte entry after finishing flush_tlb_page and before
+ * setting new huge pte entry
+ */
+ huge_ptep_get_and_clear(vma->vm_mm, addr, ptep);
+ flush_tlb_page(vma, addr);
}
static inline int huge_pte_none(pte_t pte)
--
2.30.2
From: Johan Hovold <[email protected]>
commit 53ae298fde7adcc4b1432bce2dbdf8dac54dfa72 upstream.
The direction of the pipe argument must match the request-type direction
bit or control requests may fail depending on the host-controller-driver
implementation.
Fix the USB_REQ_SYNCH_FRAME request which erroneously used
usb_sndctrlpipe().
Fixes: 27d35fc3fb06 ("V4L/DVB (10639): gspca - sq905: New subdriver.")
Cc: [email protected] # 2.6.30
Signed-off-by: Johan Hovold <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/media/usb/gspca/sq905.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/media/usb/gspca/sq905.c
+++ b/drivers/media/usb/gspca/sq905.c
@@ -130,7 +130,7 @@ static int sq905_command(struct gspca_de
}
ret = usb_control_msg(gspca_dev->dev,
- usb_sndctrlpipe(gspca_dev->dev, 0),
+ usb_rcvctrlpipe(gspca_dev->dev, 0),
USB_REQ_SYNCH_FRAME, /* request */
USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
SQ905_PING, 0, gspca_dev->usb_buf, 1,
From: Zheyu Ma <[email protected]>
[ Upstream commit 6a1e5a4af17e440dd82a58a2c5f40ff17a82b722 ]
When 'nicstar_init_one' fails, 'ns_init_card_error' will be executed for
error handling, but the correct memory free function should be used,
otherwise it will cause an error. Since 'card->rsq.org' and
'card->tsq.org' are allocated using 'dma_alloc_coherent' function, they
should be freed using 'dma_free_coherent'.
Fix this by using 'dma_free_coherent' instead of 'kfree'
This log reveals it:
[ 3.440294] kernel BUG at mm/slub.c:4206!
[ 3.441059] invalid opcode: 0000 [#1] PREEMPT SMP PTI
[ 3.441430] CPU: 2 PID: 1 Comm: swapper/0 Not tainted 5.12.4-g70e7f0549188-dirty #141
[ 3.441986] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014
[ 3.442780] RIP: 0010:kfree+0x26a/0x300
[ 3.443065] Code: e8 3a c3 b9 ff e9 d6 fd ff ff 49 8b 45 00 31 db a9 00 00 01 00 75 4d 49 8b 45 00 a9 00 00 01 00 75 0a 49 8b 45 08 a8 01 75 02 <0f> 0b 89 d9 b8 00 10 00 00 be 06 00 00 00 48 d3 e0 f7 d8 48 63 d0
[ 3.443396] RSP: 0000:ffffc90000017b70 EFLAGS: 00010246
[ 3.443396] RAX: dead000000000100 RBX: 0000000000000000 RCX: 0000000000000000
[ 3.443396] RDX: 0000000000000000 RSI: ffffffff85d3df94 RDI: ffffffff85df38e6
[ 3.443396] RBP: ffffc90000017b90 R08: 0000000000000001 R09: 0000000000000001
[ 3.443396] R10: 0000000000000000 R11: 0000000000000001 R12: ffff888107dc0000
[ 3.443396] R13: ffffea00001f0100 R14: ffff888101a8bf00 R15: ffff888107dc0160
[ 3.443396] FS: 0000000000000000(0000) GS:ffff88817bc80000(0000) knlGS:0000000000000000
[ 3.443396] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 3.443396] CR2: 0000000000000000 CR3: 000000000642e000 CR4: 00000000000006e0
[ 3.443396] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 3.443396] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 3.443396] Call Trace:
[ 3.443396] ns_init_card_error+0x12c/0x220
[ 3.443396] nicstar_init_one+0x10d2/0x1130
[ 3.443396] local_pci_probe+0x4a/0xb0
[ 3.443396] pci_device_probe+0x126/0x1d0
[ 3.443396] ? pci_device_remove+0x100/0x100
[ 3.443396] really_probe+0x27e/0x650
[ 3.443396] driver_probe_device+0x84/0x1d0
[ 3.443396] ? mutex_lock_nested+0x16/0x20
[ 3.443396] device_driver_attach+0x63/0x70
[ 3.443396] __driver_attach+0x117/0x1a0
[ 3.443396] ? device_driver_attach+0x70/0x70
[ 3.443396] bus_for_each_dev+0xb6/0x110
[ 3.443396] ? rdinit_setup+0x40/0x40
[ 3.443396] driver_attach+0x22/0x30
[ 3.443396] bus_add_driver+0x1e6/0x2a0
[ 3.443396] driver_register+0xa4/0x180
[ 3.443396] __pci_register_driver+0x77/0x80
[ 3.443396] ? uPD98402_module_init+0xd/0xd
[ 3.443396] nicstar_init+0x1f/0x75
[ 3.443396] do_one_initcall+0x7a/0x3d0
[ 3.443396] ? rdinit_setup+0x40/0x40
[ 3.443396] ? rcu_read_lock_sched_held+0x4a/0x70
[ 3.443396] kernel_init_freeable+0x2a7/0x2f9
[ 3.443396] ? rest_init+0x2c0/0x2c0
[ 3.443396] kernel_init+0x13/0x180
[ 3.443396] ? rest_init+0x2c0/0x2c0
[ 3.443396] ? rest_init+0x2c0/0x2c0
[ 3.443396] ret_from_fork+0x1f/0x30
[ 3.443396] Modules linked in:
[ 3.443396] Dumping ftrace buffer:
[ 3.443396] (ftrace buffer empty)
[ 3.458593] ---[ end trace 3c6f8f0d8ef59bcd ]---
[ 3.458922] RIP: 0010:kfree+0x26a/0x300
[ 3.459198] Code: e8 3a c3 b9 ff e9 d6 fd ff ff 49 8b 45 00 31 db a9 00 00 01 00 75 4d 49 8b 45 00 a9 00 00 01 00 75 0a 49 8b 45 08 a8 01 75 02 <0f> 0b 89 d9 b8 00 10 00 00 be 06 00 00 00 48 d3 e0 f7 d8 48 63 d0
[ 3.460499] RSP: 0000:ffffc90000017b70 EFLAGS: 00010246
[ 3.460870] RAX: dead000000000100 RBX: 0000000000000000 RCX: 0000000000000000
[ 3.461371] RDX: 0000000000000000 RSI: ffffffff85d3df94 RDI: ffffffff85df38e6
[ 3.461873] RBP: ffffc90000017b90 R08: 0000000000000001 R09: 0000000000000001
[ 3.462372] R10: 0000000000000000 R11: 0000000000000001 R12: ffff888107dc0000
[ 3.462871] R13: ffffea00001f0100 R14: ffff888101a8bf00 R15: ffff888107dc0160
[ 3.463368] FS: 0000000000000000(0000) GS:ffff88817bc80000(0000) knlGS:0000000000000000
[ 3.463949] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 3.464356] CR2: 0000000000000000 CR3: 000000000642e000 CR4: 00000000000006e0
[ 3.464856] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 3.465356] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 3.465860] Kernel panic - not syncing: Fatal exception
[ 3.466370] Dumping ftrace buffer:
[ 3.466616] (ftrace buffer empty)
[ 3.466871] Kernel Offset: disabled
[ 3.467122] Rebooting in 1 seconds..
Signed-off-by: Zheyu Ma <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/atm/nicstar.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/drivers/atm/nicstar.c b/drivers/atm/nicstar.c
index 486d7a114031..86f3e72e686f 100644
--- a/drivers/atm/nicstar.c
+++ b/drivers/atm/nicstar.c
@@ -837,10 +837,12 @@ static void ns_init_card_error(ns_dev *card, int error)
dev_kfree_skb_any(hb);
}
if (error >= 12) {
- kfree(card->rsq.org);
+ dma_free_coherent(&card->pcidev->dev, NS_RSQSIZE + NS_RSQ_ALIGNMENT,
+ card->rsq.org, card->rsq.dma);
}
if (error >= 11) {
- kfree(card->tsq.org);
+ dma_free_coherent(&card->pcidev->dev, NS_TSQSIZE + NS_TSQ_ALIGNMENT,
+ card->tsq.org, card->tsq.dma);
}
if (error >= 10) {
free_irq(card->pcidev->irq, card);
--
2.30.2
From: Jiapeng Chong <[email protected]>
[ Upstream commit aeb27bb76ad8197eb47890b1ff470d5faf8ec9a5 ]
The error code is missing in this code scenario so 0 will be returned. Add
the error code '-EINVAL' to the return value 'ret'.
Eliminates the follow smatch warning:
drivers/infiniband/hw/cxgb4/qp.c:298 create_qp() warn: missing error code 'ret'.
Link: https://lore.kernel.org/r/1622545669-20625-1-git-send-email-jiapeng.chong@linux.alibaba.com
Reported-by: Abaci Robot <[email protected]>
Signed-off-by: Jiapeng Chong <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/infiniband/hw/cxgb4/qp.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/infiniband/hw/cxgb4/qp.c b/drivers/infiniband/hw/cxgb4/qp.c
index 07579e31168c..67e4002bd776 100644
--- a/drivers/infiniband/hw/cxgb4/qp.c
+++ b/drivers/infiniband/hw/cxgb4/qp.c
@@ -277,6 +277,7 @@ static int create_qp(struct c4iw_rdev *rdev, struct t4_wq *wq,
if (user && (!wq->sq.bar2_pa || !wq->rq.bar2_pa)) {
pr_warn(MOD "%s: sqid %u or rqid %u not in BAR2 range.\n",
pci_name(rdev->lldi.pdev), wq->sq.qid, wq->rq.qid);
+ ret = -EINVAL;
goto free_dma;
}
--
2.30.2
From: Takashi Sakamoto <[email protected]>
[ Upstream commit 5d6fb80a142b5994355ce675c517baba6089d199 ]
This reverts commit 0edabdfe89581669609eaac5f6a8d0ae6fe95e7f.
I've explained that optional FireWire card for d.2 is also built-in to
d.2 Pro, however it's wrong. The optional card uses DM1000 ASIC and has
'Mackie DJ Mixer' in its model name of configuration ROM. On the other
hand, built-in FireWire card for d.2 Pro and d.4 Pro uses OXFW971 ASIC
and has 'd.Pro' in its model name according to manuals and user
experiences. The former card is not the card for d.2 Pro. They are similar
in appearance but different internally.
Signed-off-by: Takashi Sakamoto <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/firewire/Kconfig | 4 ++--
sound/firewire/bebob/bebob.c | 2 +-
sound/firewire/oxfw/oxfw.c | 2 +-
3 files changed, 4 insertions(+), 4 deletions(-)
diff --git a/sound/firewire/Kconfig b/sound/firewire/Kconfig
index fdc01466d143..4199cfc4a96a 100644
--- a/sound/firewire/Kconfig
+++ b/sound/firewire/Kconfig
@@ -36,7 +36,7 @@ config SND_OXFW
* Mackie(Loud) Onyx-i series (former models)
* Mackie(Loud) Onyx Satellite
* Mackie(Loud) Tapco Link.Firewire
- * Mackie(Loud) d.4 pro
+ * Mackie(Loud) d.2 pro/d.4 pro (built-in FireWire card with OXFW971 ASIC)
* Mackie(Loud) U.420/U.420d
* TASCAM FireOne
@@ -91,7 +91,7 @@ config SND_BEBOB
* PreSonus FIREBOX/FIREPOD/FP10/Inspire1394
* BridgeCo RDAudio1/Audio5
* Mackie Onyx 1220/1620/1640 (FireWire I/O Card)
- * Mackie d.2 (FireWire Option) and d.2 Pro
+ * Mackie d.2 (optional FireWire card with DM1000 ASIC)
* Stanton FinalScratch 2 (ScratchAmp)
* Tascam IF-FW/DM
* Behringer XENIX UFX 1204/1604
diff --git a/sound/firewire/bebob/bebob.c b/sound/firewire/bebob/bebob.c
index 088250ff2429..64dca7931272 100644
--- a/sound/firewire/bebob/bebob.c
+++ b/sound/firewire/bebob/bebob.c
@@ -362,7 +362,7 @@ static const struct ieee1394_device_id bebob_id_table[] = {
SND_BEBOB_DEV_ENTRY(VEN_BRIDGECO, 0x00010049, &spec_normal),
/* Mackie, Onyx 1220/1620/1640 (Firewire I/O Card) */
SND_BEBOB_DEV_ENTRY(VEN_MACKIE2, 0x00010065, &spec_normal),
- // Mackie, d.2 (Firewire option card) and d.2 Pro (the card is built-in).
+ // Mackie, d.2 (optional Firewire card with DM1000).
SND_BEBOB_DEV_ENTRY(VEN_MACKIE1, 0x00010067, &spec_normal),
/* Stanton, ScratchAmp */
SND_BEBOB_DEV_ENTRY(VEN_STANTON, 0x00000001, &spec_normal),
diff --git a/sound/firewire/oxfw/oxfw.c b/sound/firewire/oxfw/oxfw.c
index 2d310bf2f2b2..c700e11ab327 100644
--- a/sound/firewire/oxfw/oxfw.c
+++ b/sound/firewire/oxfw/oxfw.c
@@ -320,7 +320,7 @@ static const struct ieee1394_device_id oxfw_id_table[] = {
* Onyx-i series (former models): 0x081216
* Mackie Onyx Satellite: 0x00200f
* Tapco LINK.firewire 4x6: 0x000460
- * d.4 pro: Unknown
+ * d.2 pro/d.4 pro (built-in card): Unknown
* U.420: Unknown
* U.420d: Unknown
*/
--
2.30.2
From: Zheyu Ma <[email protected]>
[ Upstream commit 70b639dc41ad499384e41e106fce72e36805c9f2 ]
Because the error handling is sequential, the application of resources
should be carried out in the order of error handling, so the operation
of registering the interrupt handler should be put in front, so as not
to free the unregistered interrupt handler during error handling.
This log reveals it:
[ 3.438724] Trying to free already-free IRQ 23
[ 3.439060] WARNING: CPU: 5 PID: 1 at kernel/irq/manage.c:1825 free_irq+0xfb/0x480
[ 3.440039] Modules linked in:
[ 3.440257] CPU: 5 PID: 1 Comm: swapper/0 Not tainted 5.12.4-g70e7f0549188-dirty #142
[ 3.440793] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014
[ 3.441561] RIP: 0010:free_irq+0xfb/0x480
[ 3.441845] Code: 6e 08 74 6f 4d 89 f4 e8 c3 78 09 00 4d 8b 74 24 18 4d 85 f6 75 e3 e8 b4 78 09 00 8b 75 c8 48 c7 c7 a0 ac d5 85 e8 95 d7 f5 ff <0f> 0b 48 8b 75 c0 4c 89 ff e8 87 c5 90 03 48 8b 43 40 4c 8b a0 80
[ 3.443121] RSP: 0000:ffffc90000017b50 EFLAGS: 00010086
[ 3.443483] RAX: 0000000000000000 RBX: ffff888107c6f000 RCX: 0000000000000000
[ 3.443972] RDX: 0000000000000000 RSI: ffffffff8123f301 RDI: 00000000ffffffff
[ 3.444462] RBP: ffffc90000017b90 R08: 0000000000000001 R09: 0000000000000003
[ 3.444950] R10: 0000000000000000 R11: 0000000000000001 R12: 0000000000000000
[ 3.444994] R13: ffff888107dc0000 R14: ffff888104f6bf00 R15: ffff888107c6f0a8
[ 3.444994] FS: 0000000000000000(0000) GS:ffff88817bd40000(0000) knlGS:0000000000000000
[ 3.444994] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 3.444994] CR2: 0000000000000000 CR3: 000000000642e000 CR4: 00000000000006e0
[ 3.444994] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 3.444994] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 3.444994] Call Trace:
[ 3.444994] ns_init_card_error+0x18e/0x250
[ 3.444994] nicstar_init_one+0x10d2/0x1130
[ 3.444994] local_pci_probe+0x4a/0xb0
[ 3.444994] pci_device_probe+0x126/0x1d0
[ 3.444994] ? pci_device_remove+0x100/0x100
[ 3.444994] really_probe+0x27e/0x650
[ 3.444994] driver_probe_device+0x84/0x1d0
[ 3.444994] ? mutex_lock_nested+0x16/0x20
[ 3.444994] device_driver_attach+0x63/0x70
[ 3.444994] __driver_attach+0x117/0x1a0
[ 3.444994] ? device_driver_attach+0x70/0x70
[ 3.444994] bus_for_each_dev+0xb6/0x110
[ 3.444994] ? rdinit_setup+0x40/0x40
[ 3.444994] driver_attach+0x22/0x30
[ 3.444994] bus_add_driver+0x1e6/0x2a0
[ 3.444994] driver_register+0xa4/0x180
[ 3.444994] __pci_register_driver+0x77/0x80
[ 3.444994] ? uPD98402_module_init+0xd/0xd
[ 3.444994] nicstar_init+0x1f/0x75
[ 3.444994] do_one_initcall+0x7a/0x3d0
[ 3.444994] ? rdinit_setup+0x40/0x40
[ 3.444994] ? rcu_read_lock_sched_held+0x4a/0x70
[ 3.444994] kernel_init_freeable+0x2a7/0x2f9
[ 3.444994] ? rest_init+0x2c0/0x2c0
[ 3.444994] kernel_init+0x13/0x180
[ 3.444994] ? rest_init+0x2c0/0x2c0
[ 3.444994] ? rest_init+0x2c0/0x2c0
[ 3.444994] ret_from_fork+0x1f/0x30
[ 3.444994] Kernel panic - not syncing: panic_on_warn set ...
[ 3.444994] CPU: 5 PID: 1 Comm: swapper/0 Not tainted 5.12.4-g70e7f0549188-dirty #142
[ 3.444994] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014
[ 3.444994] Call Trace:
[ 3.444994] dump_stack+0xba/0xf5
[ 3.444994] ? free_irq+0xfb/0x480
[ 3.444994] panic+0x155/0x3ed
[ 3.444994] ? __warn+0xed/0x150
[ 3.444994] ? free_irq+0xfb/0x480
[ 3.444994] __warn+0x103/0x150
[ 3.444994] ? free_irq+0xfb/0x480
[ 3.444994] report_bug+0x119/0x1c0
[ 3.444994] handle_bug+0x3b/0x80
[ 3.444994] exc_invalid_op+0x18/0x70
[ 3.444994] asm_exc_invalid_op+0x12/0x20
[ 3.444994] RIP: 0010:free_irq+0xfb/0x480
[ 3.444994] Code: 6e 08 74 6f 4d 89 f4 e8 c3 78 09 00 4d 8b 74 24 18 4d 85 f6 75 e3 e8 b4 78 09 00 8b 75 c8 48 c7 c7 a0 ac d5 85 e8 95 d7 f5 ff <0f> 0b 48 8b 75 c0 4c 89 ff e8 87 c5 90 03 48 8b 43 40 4c 8b a0 80
[ 3.444994] RSP: 0000:ffffc90000017b50 EFLAGS: 00010086
[ 3.444994] RAX: 0000000000000000 RBX: ffff888107c6f000 RCX: 0000000000000000
[ 3.444994] RDX: 0000000000000000 RSI: ffffffff8123f301 RDI: 00000000ffffffff
[ 3.444994] RBP: ffffc90000017b90 R08: 0000000000000001 R09: 0000000000000003
[ 3.444994] R10: 0000000000000000 R11: 0000000000000001 R12: 0000000000000000
[ 3.444994] R13: ffff888107dc0000 R14: ffff888104f6bf00 R15: ffff888107c6f0a8
[ 3.444994] ? vprintk_func+0x71/0x110
[ 3.444994] ns_init_card_error+0x18e/0x250
[ 3.444994] nicstar_init_one+0x10d2/0x1130
[ 3.444994] local_pci_probe+0x4a/0xb0
[ 3.444994] pci_device_probe+0x126/0x1d0
[ 3.444994] ? pci_device_remove+0x100/0x100
[ 3.444994] really_probe+0x27e/0x650
[ 3.444994] driver_probe_device+0x84/0x1d0
[ 3.444994] ? mutex_lock_nested+0x16/0x20
[ 3.444994] device_driver_attach+0x63/0x70
[ 3.444994] __driver_attach+0x117/0x1a0
[ 3.444994] ? device_driver_attach+0x70/0x70
[ 3.444994] bus_for_each_dev+0xb6/0x110
[ 3.444994] ? rdinit_setup+0x40/0x40
[ 3.444994] driver_attach+0x22/0x30
[ 3.444994] bus_add_driver+0x1e6/0x2a0
[ 3.444994] driver_register+0xa4/0x180
[ 3.444994] __pci_register_driver+0x77/0x80
[ 3.444994] ? uPD98402_module_init+0xd/0xd
[ 3.444994] nicstar_init+0x1f/0x75
[ 3.444994] do_one_initcall+0x7a/0x3d0
[ 3.444994] ? rdinit_setup+0x40/0x40
[ 3.444994] ? rcu_read_lock_sched_held+0x4a/0x70
[ 3.444994] kernel_init_freeable+0x2a7/0x2f9
[ 3.444994] ? rest_init+0x2c0/0x2c0
[ 3.444994] kernel_init+0x13/0x180
[ 3.444994] ? rest_init+0x2c0/0x2c0
[ 3.444994] ? rest_init+0x2c0/0x2c0
[ 3.444994] ret_from_fork+0x1f/0x30
[ 3.444994] Dumping ftrace buffer:
[ 3.444994] (ftrace buffer empty)
[ 3.444994] Kernel Offset: disabled
[ 3.444994] Rebooting in 1 seconds..
Signed-off-by: Zheyu Ma <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/atm/nicstar.c | 18 +++++++++---------
1 file changed, 9 insertions(+), 9 deletions(-)
diff --git a/drivers/atm/nicstar.c b/drivers/atm/nicstar.c
index 86f3e72e686f..56d464b58768 100644
--- a/drivers/atm/nicstar.c
+++ b/drivers/atm/nicstar.c
@@ -525,6 +525,15 @@ static int ns_init_card(int i, struct pci_dev *pcidev)
/* Set the VPI/VCI MSb mask to zero so we can receive OAM cells */
writel(0x00000000, card->membase + VPM);
+ card->intcnt = 0;
+ if (request_irq
+ (pcidev->irq, &ns_irq_handler, IRQF_SHARED, "nicstar", card) != 0) {
+ pr_err("nicstar%d: can't allocate IRQ %d.\n", i, pcidev->irq);
+ error = 9;
+ ns_init_card_error(card, error);
+ return error;
+ }
+
/* Initialize TSQ */
card->tsq.org = dma_alloc_coherent(&card->pcidev->dev,
NS_TSQSIZE + NS_TSQ_ALIGNMENT,
@@ -751,15 +760,6 @@ static int ns_init_card(int i, struct pci_dev *pcidev)
card->efbie = 1;
- card->intcnt = 0;
- if (request_irq
- (pcidev->irq, &ns_irq_handler, IRQF_SHARED, "nicstar", card) != 0) {
- printk("nicstar%d: can't allocate IRQ %d.\n", i, pcidev->irq);
- error = 9;
- ns_init_card_error(card, error);
- return error;
- }
-
/* Register device */
card->atmdev = atm_dev_register("nicstar", &card->pcidev->dev, &atm_ops,
-1, NULL);
--
2.30.2
From: Íñigo Huguet <[email protected]>
[ Upstream commit 1ebe4feb8b442884f5a28d2437040096723dd1ea ]
If SRIOV cannot be disabled during device removal or module unloading,
return error code so it can be logged properly in the calling function.
Note that this can only happen if any VF is currently attached to a
guest using Xen, but not with vfio/KVM. Despite that in that case the
VFs won't work properly with PF removed and/or the module unloaded, I
have let it as is because I don't know what side effects may have
changing it, and also it seems to be the same that other drivers are
doing in this situation.
In the case of being called during SRIOV reconfiguration, the behavior
hasn't changed because the function is called with force=false.
Signed-off-by: Íñigo Huguet <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/sfc/ef10_sriov.c | 15 +++++++++++----
1 file changed, 11 insertions(+), 4 deletions(-)
diff --git a/drivers/net/ethernet/sfc/ef10_sriov.c b/drivers/net/ethernet/sfc/ef10_sriov.c
index b3c27331b374..8fce0c819a4b 100644
--- a/drivers/net/ethernet/sfc/ef10_sriov.c
+++ b/drivers/net/ethernet/sfc/ef10_sriov.c
@@ -378,12 +378,17 @@ fail1:
return rc;
}
+/* Disable SRIOV and remove VFs
+ * If some VFs are attached to a guest (using Xen, only) nothing is
+ * done if force=false, and vports are freed if force=true (for the non
+ * attachedc ones, only) but SRIOV is not disabled and VFs are not
+ * removed in either case.
+ */
static int efx_ef10_pci_sriov_disable(struct efx_nic *efx, bool force)
{
struct pci_dev *dev = efx->pci_dev;
- unsigned int vfs_assigned = 0;
-
- vfs_assigned = pci_vfs_assigned(dev);
+ unsigned int vfs_assigned = pci_vfs_assigned(dev);
+ int rc = 0;
if (vfs_assigned && !force) {
netif_info(efx, drv, efx->net_dev, "VFs are assigned to guests; "
@@ -393,10 +398,12 @@ static int efx_ef10_pci_sriov_disable(struct efx_nic *efx, bool force)
if (!vfs_assigned)
pci_disable_sriov(dev);
+ else
+ rc = -EBUSY;
efx_ef10_sriov_free_vf_vswitching(efx);
efx->vf_count = 0;
- return 0;
+ return rc;
}
int efx_ef10_sriov_configure(struct efx_nic *efx, int num_vfs)
--
2.30.2
From: Christophe JAILLET <[email protected]>
[ Upstream commit fad92b11047a748c996ebd6cfb164a63814eeb2e ]
In the probe function, if the final 'serial_config()' fails, 'info' is
leaking.
Add a resource handling path to free this memory.
Signed-off-by: Christophe JAILLET <[email protected]>
Link: https://lore.kernel.org/r/dc25f96b7faebf42e60fe8d02963c941cf4d8124.1621971720.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/tty/serial/8250/serial_cs.c | 11 ++++++++++-
1 file changed, 10 insertions(+), 1 deletion(-)
diff --git a/drivers/tty/serial/8250/serial_cs.c b/drivers/tty/serial/8250/serial_cs.c
index bf5feb2ea35a..92c64ed12295 100644
--- a/drivers/tty/serial/8250/serial_cs.c
+++ b/drivers/tty/serial/8250/serial_cs.c
@@ -305,6 +305,7 @@ static int serial_resume(struct pcmcia_device *link)
static int serial_probe(struct pcmcia_device *link)
{
struct serial_info *info;
+ int ret;
dev_dbg(&link->dev, "serial_attach()\n");
@@ -319,7 +320,15 @@ static int serial_probe(struct pcmcia_device *link)
if (do_sound)
link->config_flags |= CONF_ENABLE_SPKR;
- return serial_config(link);
+ ret = serial_config(link);
+ if (ret)
+ goto free_info;
+
+ return 0;
+
+free_info:
+ kfree(info);
+ return ret;
}
static void serial_detach(struct pcmcia_device *link)
--
2.30.2
From: Linus Walleij <[email protected]>
commit f1c74a6c07e76fcb31a4bcc1f437c4361a2674ce upstream.
Trying to get the AB8500 charging driver working I ran into a bit
of bitrot: we haven't used the driver for a while so errors in
refactorings won't be noticed.
This one is pretty self evident: use argument to the macro or we
end up with a random pointer to something else.
Cc: [email protected]
Cc: Krzysztof Kozlowski <[email protected]>
Cc: Marcus Cooper <[email protected]>
Fixes: 297d716f6260 ("power_supply: Change ownership from driver to core")
Signed-off-by: Linus Walleij <[email protected]>
Signed-off-by: Sebastian Reichel <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
include/linux/mfd/abx500/ux500_chargalg.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/include/linux/mfd/abx500/ux500_chargalg.h
+++ b/include/linux/mfd/abx500/ux500_chargalg.h
@@ -15,7 +15,7 @@
* - POWER_SUPPLY_TYPE_USB,
* because only them store as drv_data pointer to struct ux500_charger.
*/
-#define psy_to_ux500_charger(x) power_supply_get_drvdata(psy)
+#define psy_to_ux500_charger(x) power_supply_get_drvdata(x)
/* Forward declaration */
struct ux500_charger;
From: Pavel Skripkin <[email protected]>
commit 0a045eac8d0427b64577a24d74bb8347c905ac65 upstream.
syzbot reported memory leak in zr364xx driver.
The problem was in non-freed urb in case of
usb_submit_urb() fail.
backtrace:
[<ffffffff82baedf6>] kmalloc include/linux/slab.h:561 [inline]
[<ffffffff82baedf6>] usb_alloc_urb+0x66/0xe0 drivers/usb/core/urb.c:74
[<ffffffff82f7cce8>] zr364xx_start_readpipe+0x78/0x130 drivers/media/usb/zr364xx/zr364xx.c:1022
[<ffffffff84251dfc>] zr364xx_board_init drivers/media/usb/zr364xx/zr364xx.c:1383 [inline]
[<ffffffff84251dfc>] zr364xx_probe+0x6a3/0x851 drivers/media/usb/zr364xx/zr364xx.c:1516
[<ffffffff82bb6507>] usb_probe_interface+0x177/0x370 drivers/usb/core/driver.c:396
[<ffffffff826018a9>] really_probe+0x159/0x500 drivers/base/dd.c:576
Fixes: ccbf035ae5de ("V4L/DVB (12278): zr364xx: implement V4L2_CAP_STREAMING")
Cc: [email protected]
Reported-by: [email protected]
Signed-off-by: Pavel Skripkin <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/media/usb/zr364xx/zr364xx.c | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/media/usb/zr364xx/zr364xx.c
+++ b/drivers/media/usb/zr364xx/zr364xx.c
@@ -1068,6 +1068,7 @@ static int zr364xx_start_readpipe(struct
DBG("submitting URB %p\n", pipe_info->stream_urb);
retval = usb_submit_urb(pipe_info->stream_urb, GFP_KERNEL);
if (retval) {
+ usb_free_urb(pipe_info->stream_urb);
printk(KERN_ERR KBUILD_MODNAME ": start read pipe failed\n");
return retval;
}
From: Íñigo Huguet <[email protected]>
[ Upstream commit 45423cff1db66cf0993e8a9bd0ac93e740149e49 ]
If pci_remove was called for a PF with VFs, the removal of the VFs was
called twice from efx_ef10_sriov_fini: one directly with pci_driver->remove
and another implicit by calling pci_disable_sriov, which also perform
the VFs remove. This was leading to crashing the kernel on the second
attempt.
Given that pci_disable_sriov already calls to pci remove function, get
rid of the direct call to pci_driver->remove from the driver.
2 different ways to trigger the bug:
- Create one or more VFs, then attach the PF to a virtual machine (at
least with qemu/KVM)
- Create one or more VFs, then remove the PF with:
echo 1 > /sys/bus/pci/devices/PF_PCI_ID/remove
Removing sfc module does not trigger the error, at least for me, because
it removes the VF first, and then the PF.
Example of a log with the error:
list_del corruption, ffff967fd20a8ad0->next is LIST_POISON1 (dead000000000100)
------------[ cut here ]------------
kernel BUG at lib/list_debug.c:47!
[...trimmed...]
RIP: 0010:__list_del_entry_valid.cold.1+0x12/0x4c
[...trimmed...]
Call Trace:
efx_dissociate+0x1f/0x140 [sfc]
efx_pci_remove+0x27/0x150 [sfc]
pci_device_remove+0x3b/0xc0
device_release_driver_internal+0x103/0x1f0
pci_stop_bus_device+0x69/0x90
pci_stop_and_remove_bus_device+0xe/0x20
pci_iov_remove_virtfn+0xba/0x120
sriov_disable+0x2f/0xe0
efx_ef10_pci_sriov_disable+0x52/0x80 [sfc]
? pcie_aer_is_native+0x12/0x40
efx_ef10_sriov_fini+0x72/0x110 [sfc]
efx_pci_remove+0x62/0x150 [sfc]
pci_device_remove+0x3b/0xc0
device_release_driver_internal+0x103/0x1f0
unbind_store+0xf6/0x130
kernfs_fop_write+0x116/0x190
vfs_write+0xa5/0x1a0
ksys_write+0x4f/0xb0
do_syscall_64+0x5b/0x1a0
entry_SYSCALL_64_after_hwframe+0x65/0xca
Signed-off-by: Íñigo Huguet <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/sfc/ef10_sriov.c | 10 +---------
1 file changed, 1 insertion(+), 9 deletions(-)
diff --git a/drivers/net/ethernet/sfc/ef10_sriov.c b/drivers/net/ethernet/sfc/ef10_sriov.c
index 3c17f274e802..b3c27331b374 100644
--- a/drivers/net/ethernet/sfc/ef10_sriov.c
+++ b/drivers/net/ethernet/sfc/ef10_sriov.c
@@ -415,7 +415,6 @@ int efx_ef10_sriov_init(struct efx_nic *efx)
void efx_ef10_sriov_fini(struct efx_nic *efx)
{
struct efx_ef10_nic_data *nic_data = efx->nic_data;
- unsigned int i;
int rc;
if (!nic_data->vf) {
@@ -425,14 +424,7 @@ void efx_ef10_sriov_fini(struct efx_nic *efx)
return;
}
- /* Remove any VFs in the host */
- for (i = 0; i < efx->vf_count; ++i) {
- struct efx_nic *vf_efx = nic_data->vf[i].efx;
-
- if (vf_efx)
- vf_efx->pci_dev->driver->remove(vf_efx->pci_dev);
- }
-
+ /* Disable SRIOV and remove any VFs in the host */
rc = efx_ef10_pci_sriov_disable(efx, true);
if (rc)
netif_dbg(efx, drv, efx->net_dev,
--
2.30.2
From: Zou Wei <[email protected]>
[ Upstream commit dd778f89225cd258e8f0fed2b7256124982c8bb5 ]
This patch adds missing MODULE_DEVICE_TABLE definition which generates
correct modalias for automatic loading of this driver when it is built
as an external module.
Reported-by: Hulk Robot <[email protected]>
Signed-off-by: Zou Wei <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/cw1200/cw1200_sdio.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/net/wireless/cw1200/cw1200_sdio.c b/drivers/net/wireless/cw1200/cw1200_sdio.c
index d3acc85932a5..de92107549ee 100644
--- a/drivers/net/wireless/cw1200/cw1200_sdio.c
+++ b/drivers/net/wireless/cw1200/cw1200_sdio.c
@@ -62,6 +62,7 @@ static const struct sdio_device_id cw1200_sdio_ids[] = {
{ SDIO_DEVICE(SDIO_VENDOR_ID_STE, SDIO_DEVICE_ID_STE_CW1200) },
{ /* end: all zeroes */ },
};
+MODULE_DEVICE_TABLE(sdio, cw1200_sdio_ids);
/* hwbus_ops implemetation */
--
2.30.2
From: Benjamin Herrenschmidt <[email protected]>
[ Upstream commit c93f80849bdd9b45d834053ae1336e28f0026c84 ]
This fixes the core devtree.c functions and the ns16550 UART backend.
Signed-off-by: Benjamin Herrenschmidt <[email protected]>
Signed-off-by: Paul Mackerras <[email protected]>
Reviewed-by: Segher Boessenkool <[email protected]>
Acked-by: Nicholas Piggin <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
arch/powerpc/boot/devtree.c | 59 +++++++++++++++++++++----------------
arch/powerpc/boot/ns16550.c | 9 ++++--
2 files changed, 41 insertions(+), 27 deletions(-)
diff --git a/arch/powerpc/boot/devtree.c b/arch/powerpc/boot/devtree.c
index a7e21a35c03a..27c84b82b588 100644
--- a/arch/powerpc/boot/devtree.c
+++ b/arch/powerpc/boot/devtree.c
@@ -17,6 +17,7 @@
#include "string.h"
#include "stdio.h"
#include "ops.h"
+#include "of.h"
void dt_fixup_memory(u64 start, u64 size)
{
@@ -27,21 +28,25 @@ void dt_fixup_memory(u64 start, u64 size)
root = finddevice("/");
if (getprop(root, "#address-cells", &naddr, sizeof(naddr)) < 0)
naddr = 2;
+ else
+ naddr = be32_to_cpu(naddr);
if (naddr < 1 || naddr > 2)
fatal("Can't cope with #address-cells == %d in /\n\r", naddr);
if (getprop(root, "#size-cells", &nsize, sizeof(nsize)) < 0)
nsize = 1;
+ else
+ nsize = be32_to_cpu(nsize);
if (nsize < 1 || nsize > 2)
fatal("Can't cope with #size-cells == %d in /\n\r", nsize);
i = 0;
if (naddr == 2)
- memreg[i++] = start >> 32;
- memreg[i++] = start & 0xffffffff;
+ memreg[i++] = cpu_to_be32(start >> 32);
+ memreg[i++] = cpu_to_be32(start & 0xffffffff);
if (nsize == 2)
- memreg[i++] = size >> 32;
- memreg[i++] = size & 0xffffffff;
+ memreg[i++] = cpu_to_be32(size >> 32);
+ memreg[i++] = cpu_to_be32(size & 0xffffffff);
memory = finddevice("/memory");
if (! memory) {
@@ -49,9 +54,9 @@ void dt_fixup_memory(u64 start, u64 size)
setprop_str(memory, "device_type", "memory");
}
- printf("Memory <- <0x%x", memreg[0]);
+ printf("Memory <- <0x%x", be32_to_cpu(memreg[0]));
for (i = 1; i < (naddr + nsize); i++)
- printf(" 0x%x", memreg[i]);
+ printf(" 0x%x", be32_to_cpu(memreg[i]));
printf("> (%ldMB)\n\r", (unsigned long)(size >> 20));
setprop(memory, "reg", memreg, (naddr + nsize)*sizeof(u32));
@@ -69,10 +74,10 @@ void dt_fixup_cpu_clocks(u32 cpu, u32 tb, u32 bus)
printf("CPU bus-frequency <- 0x%x (%dMHz)\n\r", bus, MHZ(bus));
while ((devp = find_node_by_devtype(devp, "cpu"))) {
- setprop_val(devp, "clock-frequency", cpu);
- setprop_val(devp, "timebase-frequency", tb);
+ setprop_val(devp, "clock-frequency", cpu_to_be32(cpu));
+ setprop_val(devp, "timebase-frequency", cpu_to_be32(tb));
if (bus > 0)
- setprop_val(devp, "bus-frequency", bus);
+ setprop_val(devp, "bus-frequency", cpu_to_be32(bus));
}
timebase_period_ns = 1000000000 / tb;
@@ -84,7 +89,7 @@ void dt_fixup_clock(const char *path, u32 freq)
if (devp) {
printf("%s: clock-frequency <- %x (%dMHz)\n\r", path, freq, MHZ(freq));
- setprop_val(devp, "clock-frequency", freq);
+ setprop_val(devp, "clock-frequency", cpu_to_be32(freq));
}
}
@@ -137,8 +142,12 @@ void dt_get_reg_format(void *node, u32 *naddr, u32 *nsize)
{
if (getprop(node, "#address-cells", naddr, 4) != 4)
*naddr = 2;
+ else
+ *naddr = be32_to_cpu(*naddr);
if (getprop(node, "#size-cells", nsize, 4) != 4)
*nsize = 1;
+ else
+ *nsize = be32_to_cpu(*nsize);
}
static void copy_val(u32 *dest, u32 *src, int naddr)
@@ -167,9 +176,9 @@ static int add_reg(u32 *reg, u32 *add, int naddr)
int i, carry = 0;
for (i = MAX_ADDR_CELLS - 1; i >= MAX_ADDR_CELLS - naddr; i--) {
- u64 tmp = (u64)reg[i] + add[i] + carry;
+ u64 tmp = (u64)be32_to_cpu(reg[i]) + be32_to_cpu(add[i]) + carry;
carry = tmp >> 32;
- reg[i] = (u32)tmp;
+ reg[i] = cpu_to_be32((u32)tmp);
}
return !carry;
@@ -184,18 +193,18 @@ static int compare_reg(u32 *reg, u32 *range, u32 *rangesize)
u32 end;
for (i = 0; i < MAX_ADDR_CELLS; i++) {
- if (reg[i] < range[i])
+ if (be32_to_cpu(reg[i]) < be32_to_cpu(range[i]))
return 0;
- if (reg[i] > range[i])
+ if (be32_to_cpu(reg[i]) > be32_to_cpu(range[i]))
break;
}
for (i = 0; i < MAX_ADDR_CELLS; i++) {
- end = range[i] + rangesize[i];
+ end = be32_to_cpu(range[i]) + be32_to_cpu(rangesize[i]);
- if (reg[i] < end)
+ if (be32_to_cpu(reg[i]) < end)
break;
- if (reg[i] > end)
+ if (be32_to_cpu(reg[i]) > end)
return 0;
}
@@ -244,7 +253,6 @@ static int dt_xlate(void *node, int res, int reglen, unsigned long *addr,
return 0;
dt_get_reg_format(parent, &naddr, &nsize);
-
if (nsize > 2)
return 0;
@@ -256,10 +264,10 @@ static int dt_xlate(void *node, int res, int reglen, unsigned long *addr,
copy_val(last_addr, prop_buf + offset, naddr);
- ret_size = prop_buf[offset + naddr];
+ ret_size = be32_to_cpu(prop_buf[offset + naddr]);
if (nsize == 2) {
ret_size <<= 32;
- ret_size |= prop_buf[offset + naddr + 1];
+ ret_size |= be32_to_cpu(prop_buf[offset + naddr + 1]);
}
for (;;) {
@@ -282,7 +290,6 @@ static int dt_xlate(void *node, int res, int reglen, unsigned long *addr,
offset = find_range(last_addr, prop_buf, prev_naddr,
naddr, prev_nsize, buflen / 4);
-
if (offset < 0)
return 0;
@@ -300,8 +307,7 @@ static int dt_xlate(void *node, int res, int reglen, unsigned long *addr,
if (naddr > 2)
return 0;
- ret_addr = ((u64)last_addr[2] << 32) | last_addr[3];
-
+ ret_addr = ((u64)be32_to_cpu(last_addr[2]) << 32) | be32_to_cpu(last_addr[3]);
if (sizeof(void *) == 4 &&
(ret_addr >= 0x100000000ULL || ret_size > 0x100000000ULL ||
ret_addr + ret_size > 0x100000000ULL))
@@ -354,11 +360,14 @@ int dt_is_compatible(void *node, const char *compat)
int dt_get_virtual_reg(void *node, void **addr, int nres)
{
unsigned long xaddr;
- int n;
+ int n, i;
n = getprop(node, "virtual-reg", addr, nres * 4);
- if (n > 0)
+ if (n > 0) {
+ for (i = 0; i < n/4; i ++)
+ ((u32 *)addr)[i] = be32_to_cpu(((u32 *)addr)[i]);
return n / 4;
+ }
for (n = 0; n < nres; n++) {
if (!dt_xlate_reg(node, n, &xaddr, NULL))
diff --git a/arch/powerpc/boot/ns16550.c b/arch/powerpc/boot/ns16550.c
index 8c9ead94be06..cea34a20085c 100644
--- a/arch/powerpc/boot/ns16550.c
+++ b/arch/powerpc/boot/ns16550.c
@@ -14,6 +14,7 @@
#include "stdio.h"
#include "io.h"
#include "ops.h"
+#include "of.h"
#define UART_DLL 0 /* Out: Divisor Latch Low */
#define UART_DLM 1 /* Out: Divisor Latch High */
@@ -57,16 +58,20 @@ int ns16550_console_init(void *devp, struct serial_console_data *scdp)
int n;
u32 reg_offset;
- if (dt_get_virtual_reg(devp, (void **)®_base, 1) < 1)
+ if (dt_get_virtual_reg(devp, (void **)®_base, 1) < 1) {
+ printf("virt reg parse fail...\r\n");
return -1;
+ }
n = getprop(devp, "reg-offset", ®_offset, sizeof(reg_offset));
if (n == sizeof(reg_offset))
- reg_base += reg_offset;
+ reg_base += be32_to_cpu(reg_offset);
n = getprop(devp, "reg-shift", ®_shift, sizeof(reg_shift));
if (n != sizeof(reg_shift))
reg_shift = 0;
+ else
+ reg_shift = be32_to_cpu(reg_shift);
scdp->open = ns16550_open;
scdp->putc = ns16550_putc;
--
2.30.2
From: Yun Zhou <[email protected]>
commit d3b16034a24a112bb83aeb669ac5b9b01f744bb7 upstream.
There's two variables being increased in that loop (i and j), and i
follows the raw data, and j follows what is being written into the buffer.
We should compare 'i' to MAX_MEMHEX_BYTES or compare 'j' to HEX_CHARS.
Otherwise, if 'j' goes bigger than HEX_CHARS, it will overflow the
destination buffer.
Link: https://lore.kernel.org/lkml/[email protected]/
Link: https://lkml.kernel.org/r/[email protected]
Cc: [email protected]
Fixes: 5e3ca0ec76fce ("ftrace: introduce the "hex" output method")
Signed-off-by: Yun Zhou <[email protected]>
Signed-off-by: Steven Rostedt (VMware) <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
lib/seq_buf.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
--- a/lib/seq_buf.c
+++ b/lib/seq_buf.c
@@ -227,8 +227,10 @@ int seq_buf_putmem_hex(struct seq_buf *s
WARN_ON(s->size == 0);
+ BUILD_BUG_ON(MAX_MEMHEX_BYTES * 2 >= HEX_CHARS);
+
while (len) {
- start_len = min(len, HEX_CHARS - 1);
+ start_len = min(len, MAX_MEMHEX_BYTES);
#ifdef __BIG_ENDIAN
for (i = 0, j = 0; i < start_len; i++) {
#else
From: Jiajun Cao <[email protected]>
[ Upstream commit 8c13212443230d03ff25014514ec0d53498c0912 ]
The function hda_tegra_first_init() neglects to check the return
value after executing platform_get_irq().
hda_tegra_first_init() should check the return value (if negative
error number) for errors so as to not pass a negative value to
the devm_request_irq().
Fix it by adding a check for the return value irq_id.
Signed-off-by: Jiajun Cao <[email protected]>
Signed-off-by: Xin Tan <[email protected]>
Reviewed-by: Thierry Reding <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/pci/hda/hda_tegra.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/sound/pci/hda/hda_tegra.c b/sound/pci/hda/hda_tegra.c
index 039fbbb1e53c..89359a962e47 100644
--- a/sound/pci/hda/hda_tegra.c
+++ b/sound/pci/hda/hda_tegra.c
@@ -363,6 +363,9 @@ static int hda_tegra_first_init(struct azx *chip, struct platform_device *pdev)
unsigned short gcap;
int irq_id = platform_get_irq(pdev, 0);
+ if (irq_id < 0)
+ return irq_id;
+
err = hda_tegra_init_chip(chip, pdev);
if (err)
return err;
--
2.30.2
From: Dimitri John Ledkov <[email protected]>
[ Upstream commit 2c484419efc09e7234c667aa72698cb79ba8d8ed ]
lz4 compatible decompressor is simple. The format is underspecified and
relies on EOF notification to determine when to stop. Initramfs buffer
format[1] explicitly states that it can have arbitrary number of zero
padding. Thus when operating without a fill function, be extra careful to
ensure that sizes less than 4, or apperantly empty chunksizes are treated
as EOF.
To test this I have created two cpio initrds, first a normal one,
main.cpio. And second one with just a single /test-file with content
"second" second.cpio. Then i compressed both of them with gzip, and with
lz4 -l. Then I created a padding of 4 bytes (dd if=/dev/zero of=pad4 bs=1
count=4). To create four testcase initrds:
1) main.cpio.gzip + extra.cpio.gzip = pad0.gzip
2) main.cpio.lz4 + extra.cpio.lz4 = pad0.lz4
3) main.cpio.gzip + pad4 + extra.cpio.gzip = pad4.gzip
4) main.cpio.lz4 + pad4 + extra.cpio.lz4 = pad4.lz4
The pad4 test-cases replicate the initrd load by grub, as it pads and
aligns every initrd it loads.
All of the above boot, however /test-file was not accessible in the initrd
for the testcase #4, as decoding in lz4 decompressor failed. Also an
error message printed which usually is harmless.
Whith a patched kernel, all of the above testcases now pass, and
/test-file is accessible.
This fixes lz4 initrd decompress warning on every boot with grub. And
more importantly this fixes inability to load multiple lz4 compressed
initrds with grub. This patch has been shipping in Ubuntu kernels since
January 2021.
[1] ./Documentation/driver-api/early-userspace/buffer-format.rst
BugLink: https://bugs.launchpad.net/bugs/1835660
Link: https://lore.kernel.org/lkml/[email protected]/ # v0
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Dimitri John Ledkov <[email protected]>
Cc: Kyungsik Lee <[email protected]>
Cc: Yinghai Lu <[email protected]>
Cc: Bongkyu Kim <[email protected]>
Cc: Kees Cook <[email protected]>
Cc: Sven Schmidt <[email protected]>
Cc: Rajat Asthana <[email protected]>
Cc: Nick Terrell <[email protected]>
Cc: Gao Xiang <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
lib/decompress_unlz4.c | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/lib/decompress_unlz4.c b/lib/decompress_unlz4.c
index 036fc882cd72..f1449244fdd4 100644
--- a/lib/decompress_unlz4.c
+++ b/lib/decompress_unlz4.c
@@ -115,6 +115,9 @@ STATIC inline int INIT unlz4(u8 *input, long in_len,
error("data corrupted");
goto exit_2;
}
+ } else if (size < 4) {
+ /* empty or end-of-file */
+ goto exit_3;
}
chunksize = get_unaligned_le32(inp);
@@ -128,6 +131,10 @@ STATIC inline int INIT unlz4(u8 *input, long in_len,
continue;
}
+ if (!fill && chunksize == 0) {
+ /* empty or end-of-file */
+ goto exit_3;
+ }
if (posp)
*posp += 4;
@@ -184,6 +191,7 @@ STATIC inline int INIT unlz4(u8 *input, long in_len,
}
}
+exit_3:
ret = 0;
exit_2:
if (!input)
--
2.30.2
From: Bixuan Cui <[email protected]>
[ Upstream commit ed3443fb4df4e140a22f65144546c8a8e1e27f4e ]
This patch adds missing MODULE_DEVICE_TABLE definition which generates
correct modalias for automatic loading of this driver when it is built
as an external module.
Reported-by: Hulk Robot <[email protected]>
Signed-off-by: Bixuan Cui <[email protected]>
Signed-off-by: Sebastian Reichel <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/power/reset/gpio-poweroff.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/power/reset/gpio-poweroff.c b/drivers/power/reset/gpio-poweroff.c
index be3d81ff51cc..a44e3427fdeb 100644
--- a/drivers/power/reset/gpio-poweroff.c
+++ b/drivers/power/reset/gpio-poweroff.c
@@ -84,6 +84,7 @@ static const struct of_device_id of_gpio_poweroff_match[] = {
{ .compatible = "gpio-poweroff", },
{},
};
+MODULE_DEVICE_TABLE(of, of_gpio_poweroff_match);
static struct platform_driver gpio_poweroff_driver = {
.probe = gpio_poweroff_probe,
--
2.30.2
From: Zou Wei <[email protected]>
[ Upstream commit c08a6b31e4917034f0ed0cb457c3bb209576f542 ]
This module's remove path calls del_timer(). However, that function
does not wait until the timer handler finishes. This means that the
timer handler may still be running after the driver's remove function
has finished, which would result in a use-after-free.
Fix by calling del_timer_sync(), which makes sure the timer handler
has finished, and unable to re-schedule itself.
Reported-by: Hulk Robot <[email protected]>
Signed-off-by: Zou Wei <[email protected]>
Reviewed-by: Guenter Roeck <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Guenter Roeck <[email protected]>
Signed-off-by: Wim Van Sebroeck <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/watchdog/sbc60xxwdt.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/watchdog/sbc60xxwdt.c b/drivers/watchdog/sbc60xxwdt.c
index 2eef58a0cf05..152db059d5aa 100644
--- a/drivers/watchdog/sbc60xxwdt.c
+++ b/drivers/watchdog/sbc60xxwdt.c
@@ -152,7 +152,7 @@ static void wdt_startup(void)
static void wdt_turnoff(void)
{
/* Stop the timer */
- del_timer(&timer);
+ del_timer_sync(&timer);
inb_p(wdt_stop);
pr_info("Watchdog timer is now disabled...\n");
}
--
2.30.2
From: Zou Wei <[email protected]>
[ Upstream commit 90b7c141132244e8e49a34a4c1e445cce33e07f4 ]
This module's remove path calls del_timer(). However, that function
does not wait until the timer handler finishes. This means that the
timer handler may still be running after the driver's remove function
has finished, which would result in a use-after-free.
Fix by calling del_timer_sync(), which makes sure the timer handler
has finished, and unable to re-schedule itself.
Reported-by: Hulk Robot <[email protected]>
Signed-off-by: Zou Wei <[email protected]>
Reviewed-by: Guenter Roeck <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Guenter Roeck <[email protected]>
Signed-off-by: Wim Van Sebroeck <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/watchdog/sc520_wdt.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/watchdog/sc520_wdt.c b/drivers/watchdog/sc520_wdt.c
index 1cfd3f6a13d5..08500db8324f 100644
--- a/drivers/watchdog/sc520_wdt.c
+++ b/drivers/watchdog/sc520_wdt.c
@@ -190,7 +190,7 @@ static int wdt_startup(void)
static int wdt_turnoff(void)
{
/* Stop the timer */
- del_timer(&timer);
+ del_timer_sync(&timer);
/* Stop the watchdog */
wdt_config(0);
--
2.30.2
From: Uwe Kleine-König <[email protected]>
[ Upstream commit b9481a667a90ec739995e85f91f3672ca44d6ffa ]
According to <linux/backlight.h> .update_status() is supposed to
return 0 on success and a negative error code otherwise. Adapt
lm3630a_bank_a_update_status() and lm3630a_bank_b_update_status() to
actually do it.
While touching that also add the error code to the failure message.
Signed-off-by: Uwe Kleine-König <[email protected]>
Reviewed-by: Daniel Thompson <[email protected]>
Signed-off-by: Lee Jones <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/video/backlight/lm3630a_bl.c | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)
diff --git a/drivers/video/backlight/lm3630a_bl.c b/drivers/video/backlight/lm3630a_bl.c
index 5ef6f9d420a2..ab882c04f975 100644
--- a/drivers/video/backlight/lm3630a_bl.c
+++ b/drivers/video/backlight/lm3630a_bl.c
@@ -183,7 +183,7 @@ static int lm3630a_bank_a_update_status(struct backlight_device *bl)
if ((pwm_ctrl & LM3630A_PWM_BANK_A) != 0) {
lm3630a_pwm_ctrl(pchip, bl->props.brightness,
bl->props.max_brightness);
- return bl->props.brightness;
+ return 0;
}
/* disable sleep */
@@ -203,8 +203,8 @@ static int lm3630a_bank_a_update_status(struct backlight_device *bl)
return 0;
out_i2c_err:
- dev_err(pchip->dev, "i2c failed to access\n");
- return bl->props.brightness;
+ dev_err(pchip->dev, "i2c failed to access (%pe)\n", ERR_PTR(ret));
+ return ret;
}
static int lm3630a_bank_a_get_brightness(struct backlight_device *bl)
@@ -260,7 +260,7 @@ static int lm3630a_bank_b_update_status(struct backlight_device *bl)
if ((pwm_ctrl & LM3630A_PWM_BANK_B) != 0) {
lm3630a_pwm_ctrl(pchip, bl->props.brightness,
bl->props.max_brightness);
- return bl->props.brightness;
+ return 0;
}
/* disable sleep */
@@ -280,8 +280,8 @@ static int lm3630a_bank_b_update_status(struct backlight_device *bl)
return 0;
out_i2c_err:
- dev_err(pchip->dev, "i2c failed to access REG_CTRL\n");
- return bl->props.brightness;
+ dev_err(pchip->dev, "i2c failed to access (%pe)\n", ERR_PTR(ret));
+ return ret;
}
static int lm3630a_bank_b_get_brightness(struct backlight_device *bl)
--
2.30.2
From: Gustavo A. R. Silva <[email protected]>
[ Upstream commit e93bdd78406da9ed01554c51e38b2a02c8ef8025 ]
Fix the following out-of-bounds warning:
net/wireless/wext-spy.c:178:2: warning: 'memcpy' offset [25, 28] from the object at 'threshold' is out of the bounds of referenced subobject 'low' with type 'struct iw_quality' at offset 20 [-Warray-bounds]
The problem is that the original code is trying to copy data into a
couple of struct members adjacent to each other in a single call to
memcpy(). This causes a legitimate compiler warning because memcpy()
overruns the length of &threshold.low and &spydata->spy_thr_low. As
these are just a couple of struct members, fix this by using direct
assignments, instead of memcpy().
This helps with the ongoing efforts to globally enable -Warray-bounds
and get us closer to being able to tighten the FORTIFY_SOURCE routines
on memcpy().
Link: https://github.com/KSPP/linux/issues/109
Reported-by: kernel test robot <[email protected]>
Signed-off-by: Gustavo A. R. Silva <[email protected]>
Reviewed-by: Kees Cook <[email protected]>
Link: https://lore.kernel.org/r/20210422200032.GA168995@embeddedor
Signed-off-by: Johannes Berg <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/wireless/wext-spy.c | 14 +++++++-------
1 file changed, 7 insertions(+), 7 deletions(-)
diff --git a/net/wireless/wext-spy.c b/net/wireless/wext-spy.c
index 33bef22e44e9..b379a0371653 100644
--- a/net/wireless/wext-spy.c
+++ b/net/wireless/wext-spy.c
@@ -120,8 +120,8 @@ int iw_handler_set_thrspy(struct net_device * dev,
return -EOPNOTSUPP;
/* Just do it */
- memcpy(&(spydata->spy_thr_low), &(threshold->low),
- 2 * sizeof(struct iw_quality));
+ spydata->spy_thr_low = threshold->low;
+ spydata->spy_thr_high = threshold->high;
/* Clear flag */
memset(spydata->spy_thr_under, '\0', sizeof(spydata->spy_thr_under));
@@ -147,8 +147,8 @@ int iw_handler_get_thrspy(struct net_device * dev,
return -EOPNOTSUPP;
/* Just do it */
- memcpy(&(threshold->low), &(spydata->spy_thr_low),
- 2 * sizeof(struct iw_quality));
+ threshold->low = spydata->spy_thr_low;
+ threshold->high = spydata->spy_thr_high;
return 0;
}
@@ -173,10 +173,10 @@ static void iw_send_thrspy_event(struct net_device * dev,
memcpy(threshold.addr.sa_data, address, ETH_ALEN);
threshold.addr.sa_family = ARPHRD_ETHER;
/* Copy stats */
- memcpy(&(threshold.qual), wstats, sizeof(struct iw_quality));
+ threshold.qual = *wstats;
/* Copy also thresholds */
- memcpy(&(threshold.low), &(spydata->spy_thr_low),
- 2 * sizeof(struct iw_quality));
+ threshold.low = spydata->spy_thr_low;
+ threshold.high = spydata->spy_thr_high;
/* Send event to user space */
wireless_send_event(dev, SIOCGIWTHRSPY, &wrqu, (char *) &threshold);
--
2.30.2
From: Steffen Klassert <[email protected]>
[ Upstream commit 6fd06963fa74197103cdbb4b494763127b3f2f34 ]
When memory allocation for XFRMA_ENCAP or XFRMA_COADDR fails,
the error will not be reported because the -ENOMEM assignment
to the err variable is overwritten before. Fix this by moving
these two in front of the function so that memory allocation
failures will be reported.
Reported-by: Tobias Brunner <[email protected]>
Signed-off-by: Steffen Klassert <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/xfrm/xfrm_user.c | 28 ++++++++++++++--------------
1 file changed, 14 insertions(+), 14 deletions(-)
diff --git a/net/xfrm/xfrm_user.c b/net/xfrm/xfrm_user.c
index 158f630cc7a6..98ea6ebc7317 100644
--- a/net/xfrm/xfrm_user.c
+++ b/net/xfrm/xfrm_user.c
@@ -566,6 +566,20 @@ static struct xfrm_state *xfrm_state_construct(struct net *net,
copy_from_user_state(x, p);
+ if (attrs[XFRMA_ENCAP]) {
+ x->encap = kmemdup(nla_data(attrs[XFRMA_ENCAP]),
+ sizeof(*x->encap), GFP_KERNEL);
+ if (x->encap == NULL)
+ goto error;
+ }
+
+ if (attrs[XFRMA_COADDR]) {
+ x->coaddr = kmemdup(nla_data(attrs[XFRMA_COADDR]),
+ sizeof(*x->coaddr), GFP_KERNEL);
+ if (x->coaddr == NULL)
+ goto error;
+ }
+
if (attrs[XFRMA_SA_EXTRA_FLAGS])
x->props.extra_flags = nla_get_u32(attrs[XFRMA_SA_EXTRA_FLAGS]);
@@ -586,23 +600,9 @@ static struct xfrm_state *xfrm_state_construct(struct net *net,
attrs[XFRMA_ALG_COMP])))
goto error;
- if (attrs[XFRMA_ENCAP]) {
- x->encap = kmemdup(nla_data(attrs[XFRMA_ENCAP]),
- sizeof(*x->encap), GFP_KERNEL);
- if (x->encap == NULL)
- goto error;
- }
-
if (attrs[XFRMA_TFCPAD])
x->tfcpad = nla_get_u32(attrs[XFRMA_TFCPAD]);
- if (attrs[XFRMA_COADDR]) {
- x->coaddr = kmemdup(nla_data(attrs[XFRMA_COADDR]),
- sizeof(*x->coaddr), GFP_KERNEL);
- if (x->coaddr == NULL)
- goto error;
- }
-
xfrm_mark_get(attrs, &x->mark);
err = __xfrm_init_state(x, false);
--
2.30.2
From: Yang Yingliang <[email protected]>
[ Upstream commit 88693f770bb09c196b1eb5f06a484a254ecb9924 ]
Fix to return a negative error code from the error handling
case instead of 0.
Reported-by: Hulk Robot <[email protected]>
Signed-off-by: Yang Yingliang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/usb/gadget/legacy/hid.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/usb/gadget/legacy/hid.c b/drivers/usb/gadget/legacy/hid.c
index 7e5d2c48476e..97329ba5d382 100644
--- a/drivers/usb/gadget/legacy/hid.c
+++ b/drivers/usb/gadget/legacy/hid.c
@@ -175,8 +175,10 @@ static int hid_bind(struct usb_composite_dev *cdev)
struct usb_descriptor_header *usb_desc;
usb_desc = usb_otg_descriptor_alloc(gadget);
- if (!usb_desc)
+ if (!usb_desc) {
+ status = -ENOMEM;
goto put;
+ }
usb_otg_descriptor_init(gadget, usb_desc);
otg_desc[0] = usb_desc;
otg_desc[1] = NULL;
--
2.30.2
From: Lv Yunlong <[email protected]>
[ Upstream commit 7272b591c4cb9327c43443f67b8fbae7657dd9ae ]
In ibmasm_init_one, it calls ibmasm_init_remote_input_dev().
Inside ibmasm_init_remote_input_dev, mouse_dev and keybd_dev are
allocated by input_allocate_device(), and assigned to
sp->remote.mouse_dev and sp->remote.keybd_dev respectively.
In the err_free_devices error branch of ibmasm_init_one,
mouse_dev and keybd_dev are freed by input_free_device(), and return
error. Then the execution runs into error_send_message error branch
of ibmasm_init_one, where ibmasm_free_remote_input_dev(sp) is called
to unregister the freed sp->remote.mouse_dev and sp->remote.keybd_dev.
My patch add a "error_init_remote" label to handle the error of
ibmasm_init_remote_input_dev(), to avoid the uaf bugs.
Signed-off-by: Lv Yunlong <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/misc/ibmasm/module.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/drivers/misc/ibmasm/module.c b/drivers/misc/ibmasm/module.c
index 6b3bf9ab051d..706decef68a0 100644
--- a/drivers/misc/ibmasm/module.c
+++ b/drivers/misc/ibmasm/module.c
@@ -123,7 +123,7 @@ static int ibmasm_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
result = ibmasm_init_remote_input_dev(sp);
if (result) {
dev_err(sp->dev, "Failed to initialize remote queue\n");
- goto error_send_message;
+ goto error_init_remote;
}
result = ibmasm_send_driver_vpd(sp);
@@ -143,8 +143,9 @@ static int ibmasm_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
return 0;
error_send_message:
- disable_sp_interrupts(sp->base_address);
ibmasm_free_remote_input_dev(sp);
+error_init_remote:
+ disable_sp_interrupts(sp->base_address);
free_irq(sp->irq, (void *)sp);
error_request_irq:
iounmap(sp->base_address);
--
2.30.2
From: Krzysztof Wilczyński <[email protected]>
[ Upstream commit bdcdaa13ad96f1a530711c29e6d4b8311eff767c ]
"utf16s_to_utf8s(..., buf, PAGE_SIZE)" puts up to PAGE_SIZE bytes into
"buf" and returns the number of bytes it actually put there. If it wrote
PAGE_SIZE bytes, the newline added by dsm_label_utf16s_to_utf8s() would
overrun "buf".
Reduce the size available for utf16s_to_utf8s() to use so there is always
space for the newline.
[bhelgaas: reorder patch in series, commit log]
Fixes: 6058989bad05 ("PCI: Export ACPI _DSM provided firmware instance number and string name to sysfs")
Link: https://lore.kernel.org/r/[email protected]
Reported-by: Joe Perches <[email protected]>
Signed-off-by: Krzysztof Wilczyński <[email protected]>
Signed-off-by: Bjorn Helgaas <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/pci/pci-label.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/pci/pci-label.c b/drivers/pci/pci-label.c
index 024b5c179348..7d200a88cd74 100644
--- a/drivers/pci/pci-label.c
+++ b/drivers/pci/pci-label.c
@@ -157,7 +157,7 @@ static void dsm_label_utf16s_to_utf8s(union acpi_object *obj, char *buf)
len = utf16s_to_utf8s((const wchar_t *)obj->buffer.pointer,
obj->buffer.length,
UTF16_LITTLE_ENDIAN,
- buf, PAGE_SIZE);
+ buf, PAGE_SIZE - 1);
buf[len] = '\n';
}
--
2.30.2
From: Krzysztof Kozlowski <[email protected]>
[ Upstream commit 3b132ab67fc7a358fff35e808fa65d4bea452521 ]
On probe error the driver should unmap the IO memory. Smatch reports:
drivers/memory/fsl_ifc.c:298 fsl_ifc_ctrl_probe() warn: 'fsl_ifc_ctrl_dev->gregs' not released on lines: 298.
Fixes: a20cbdeffce2 ("powerpc/fsl: Add support for Integrated Flash Controller")
Reported-by: kernel test robot <[email protected]>
Reported-by: Dan Carpenter <[email protected]>
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/memory/fsl_ifc.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/memory/fsl_ifc.c b/drivers/memory/fsl_ifc.c
index acd1460cf787..040be4638140 100644
--- a/drivers/memory/fsl_ifc.c
+++ b/drivers/memory/fsl_ifc.c
@@ -228,8 +228,7 @@ static int fsl_ifc_ctrl_probe(struct platform_device *dev)
fsl_ifc_ctrl_dev->regs = of_iomap(dev->dev.of_node, 0);
if (!fsl_ifc_ctrl_dev->regs) {
dev_err(&dev->dev, "failed to get memory region\n");
- ret = -ENODEV;
- goto err;
+ return -ENODEV;
}
version = ifc_in32(&fsl_ifc_ctrl_dev->regs->ifc_rev) &
@@ -306,6 +305,7 @@ err_irq:
free_irq(fsl_ifc_ctrl_dev->irq, fsl_ifc_ctrl_dev);
irq_dispose_mapping(fsl_ifc_ctrl_dev->irq);
err:
+ iounmap(fsl_ifc_ctrl_dev->gregs);
return ret;
}
--
2.30.2
From: Dan Carpenter <[email protected]>
[ Upstream commit 54b909436ede47e0ee07f1765da27ec2efa41e84 ]
The scnprintf() function silently truncates the printf() and returns
the number bytes that it was able to copy (not counting the NUL
terminator). Thus, the highest value it can return here is
"NAME_SIZE - 1" and the overflow check is dead code. Fix this by
using the snprintf() function which returns the number of bytes that
would have been copied if there was enough space and changing the
condition from "> NAME_SIZE" to ">= NAME_SIZE".
Fixes: 92589c986b33 ("rtc-proc: permit the /proc/driver/rtc device to use other devices")
Signed-off-by: Dan Carpenter <[email protected]>
Signed-off-by: Alexandre Belloni <[email protected]>
Link: https://lore.kernel.org/r/YJov/pcGmhLi2pEl@mwanda
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/rtc/rtc-proc.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/rtc/rtc-proc.c b/drivers/rtc/rtc-proc.c
index ffa69e1c9245..4f10cb1561cc 100644
--- a/drivers/rtc/rtc-proc.c
+++ b/drivers/rtc/rtc-proc.c
@@ -26,8 +26,8 @@ static bool is_rtc_hctosys(struct rtc_device *rtc)
int size;
char name[NAME_SIZE];
- size = scnprintf(name, NAME_SIZE, "rtc%d", rtc->id);
- if (size > NAME_SIZE)
+ size = snprintf(name, NAME_SIZE, "rtc%d", rtc->id);
+ if (size >= NAME_SIZE)
return false;
return !strncmp(name, CONFIG_RTC_HCTOSYS_DEVICE, NAME_SIZE);
--
2.30.2
From: Xie Yongji <[email protected]>
[ Upstream commit d00d8da5869a2608e97cfede094dfc5e11462a46 ]
The buf->len might come from an untrusted device. This
ensures the value would not exceed the size of the buffer
to avoid data corruption or loss.
Signed-off-by: Xie Yongji <[email protected]>
Acked-by: Jason Wang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Michael S. Tsirkin <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/char/virtio_console.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/char/virtio_console.c b/drivers/char/virtio_console.c
index 226ccb7891d4..c2f1c921cb2c 100644
--- a/drivers/char/virtio_console.c
+++ b/drivers/char/virtio_console.c
@@ -487,7 +487,7 @@ static struct port_buffer *get_inbuf(struct port *port)
buf = virtqueue_get_buf(port->in_vq, &len);
if (buf) {
- buf->len = len;
+ buf->len = min_t(size_t, len, buf->size);
buf->offset = 0;
port->stats.bytes_received += len;
}
@@ -1752,7 +1752,7 @@ static void control_work_handler(struct work_struct *work)
while ((buf = virtqueue_get_buf(vq, &len))) {
spin_unlock(&portdev->c_ivq_lock);
- buf->len = len;
+ buf->len = min_t(size_t, len, buf->size);
buf->offset = 0;
handle_control_message(vq->vdev, portdev, buf);
--
2.30.2
From: Yang Yingliang <[email protected]>
[ Upstream commit 80b9c1be567c3c6bbe0d4b290af578e630485b5d ]
If snd_pmac_tumbler_init() or snd_pmac_tumbler_post_init() fails,
snd_pmac_probe() need return error code.
Reported-by: Hulk Robot <[email protected]>
Signed-off-by: Yang Yingliang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/ppc/powermac.c | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
diff --git a/sound/ppc/powermac.c b/sound/ppc/powermac.c
index 33c6be9fb388..7c70ba5e2540 100644
--- a/sound/ppc/powermac.c
+++ b/sound/ppc/powermac.c
@@ -90,7 +90,11 @@ static int snd_pmac_probe(struct platform_device *devptr)
sprintf(card->shortname, "PowerMac %s", name_ext);
sprintf(card->longname, "%s (Dev %d) Sub-frame %d",
card->shortname, chip->device_id, chip->subframe);
- if ( snd_pmac_tumbler_init(chip) < 0 || snd_pmac_tumbler_post_init() < 0)
+ err = snd_pmac_tumbler_init(chip);
+ if (err < 0)
+ goto __error;
+ err = snd_pmac_tumbler_post_init();
+ if (err < 0)
goto __error;
break;
case PMAC_AWACS:
--
2.30.2
From: Takashi Sakamoto <[email protected]>
[ Upstream commit 50ebe56222bfa0911a932930f9229ee5995508d9 ]
A user of FFADO project reported the issue of ToneWeal FW66. As a result,
the device is identified as one of applications of BeBoB solution.
I note that in the report the device returns contradictory result in plug
discovery process for audio subunit. Fortunately ALSA BeBoB driver doesn't
perform it thus it's likely to handle the device without issues.
I receive no reaction to test request for this patch yet, however it would
be worth to add support for it.
daniel@gibbonmoon:/sys/bus/firewire/devices/fw1$ grep -r . *
Binary file config_rom matches
dev:244:1
guid:0x0023270002000000
hardware_version:0x000002
is_local:0
model:0x020002
model_name:FW66
power/runtime_active_time:0
power/runtime_active_kids:0
power/runtime_usage:0
power/runtime_status:unsupported
power/async:disabled
power/runtime_suspended_time:0
power/runtime_enabled:disabled
power/control:auto
subsystem/drivers_autoprobe:1
uevent:MAJOR=244
uevent:MINOR=1
uevent:DEVNAME=fw1
units:0x00a02d:0x010001
vendor:0x002327
vendor_name:ToneWeal
fw1.0/uevent:MODALIAS=ieee1394:ven00002327mo00020002sp0000A02Dver00010001
fw1.0/power/runtime_active_time:0
fw1.0/power/runtime_active_kids:0
fw1.0/power/runtime_usage:0
fw1.0/power/runtime_status:unsupported
fw1.0/power/async:disabled
fw1.0/power/runtime_suspended_time:0
fw1.0/power/runtime_enabled:disabled
fw1.0/power/control:auto
fw1.0/model:0x020002
fw1.0/rom_index:15
fw1.0/specifier_id:0x00a02d
fw1.0/model_name:FW66
fw1.0/version:0x010001
fw1.0/modalias:ieee1394:ven00002327mo00020002sp0000A02Dver00010001
Cc: Daniel Jozsef <[email protected]>
Reference: https://lore.kernel.org/alsa-devel/20200119164335.GA11974@workstation/
Signed-off-by: Takashi Sakamoto <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/firewire/Kconfig | 1 +
sound/firewire/bebob/bebob.c | 3 +++
2 files changed, 4 insertions(+)
diff --git a/sound/firewire/Kconfig b/sound/firewire/Kconfig
index 4199cfc4a96a..850315d1abca 100644
--- a/sound/firewire/Kconfig
+++ b/sound/firewire/Kconfig
@@ -117,6 +117,7 @@ config SND_BEBOB
* M-Audio Ozonic/NRV10/ProfireLightBridge
* M-Audio FireWire 1814/ProjectMix IO
* Digidesign Mbox 2 Pro
+ * ToneWeal FW66
To compile this driver as a module, choose M here: the module
will be called snd-bebob.
diff --git a/sound/firewire/bebob/bebob.c b/sound/firewire/bebob/bebob.c
index 64dca7931272..c3c14e383e73 100644
--- a/sound/firewire/bebob/bebob.c
+++ b/sound/firewire/bebob/bebob.c
@@ -60,6 +60,7 @@ static DECLARE_BITMAP(devices_used, SNDRV_CARDS);
#define VEN_MAUDIO1 0x00000d6c
#define VEN_MAUDIO2 0x000007f5
#define VEN_DIGIDESIGN 0x00a07e
+#define OUI_SHOUYO 0x002327
#define MODEL_FOCUSRITE_SAFFIRE_BOTH 0x00000000
#define MODEL_MAUDIO_AUDIOPHILE_BOTH 0x00010060
@@ -461,6 +462,8 @@ static const struct ieee1394_device_id bebob_id_table[] = {
&maudio_special_spec),
/* Digidesign Mbox 2 Pro */
SND_BEBOB_DEV_ENTRY(VEN_DIGIDESIGN, 0x0000a9, &spec_normal),
+ // Toneweal FW66.
+ SND_BEBOB_DEV_ENTRY(OUI_SHOUYO, 0x020002, &spec_normal),
/* IDs are unknown but able to be supported */
/* Apogee, Mini-ME Firewire */
/* Apogee, Mini-DAC Firewire */
--
2.30.2
From: Martin Fäcknitz <[email protected]>
[ Upstream commit 47ce8527fbba145a7723685bc9a27d9855e06491 ]
Accessing raw timers (currently only CLOCK_MONOTONIC_RAW) through VDSO
doesn't return the correct time when using the GIC as clock source.
The address of the GIC mapped page is in this case not calculated
correctly. The GIC mapped page is calculated from the VDSO data by
subtracting PAGE_SIZE:
void *get_gic(const struct vdso_data *data) {
return (void __iomem *)data - PAGE_SIZE;
}
However, the data pointer is not page aligned for raw clock sources.
This is because the VDSO data for raw clock sources (CS_RAW = 1) is
stored after the VDSO data for coarse clock sources (CS_HRES_COARSE = 0).
Therefore, only the VDSO data for CS_HRES_COARSE is page aligned:
+--------------------+
| |
| vd[CS_RAW] | ---+
| vd[CS_HRES_COARSE] | |
+--------------------+ | -PAGE_SIZE
| | |
| GIC mapped page | <--+
| |
+--------------------+
When __arch_get_hw_counter() is called with &vd[CS_RAW], get_gic returns
the wrong address (somewhere inside the GIC mapped page). The GIC counter
values are not returned which results in an invalid time.
Fixes: a7f4df4e21dd ("MIPS: VDSO: Add implementations of gettimeofday() and clock_gettime()")
Signed-off-by: Martin Fäcknitz <[email protected]>
Signed-off-by: Thomas Bogendoerfer <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/mips/vdso/vdso.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/mips/vdso/vdso.h b/arch/mips/vdso/vdso.h
index cfb1be441dec..921589b45bc2 100644
--- a/arch/mips/vdso/vdso.h
+++ b/arch/mips/vdso/vdso.h
@@ -81,7 +81,7 @@ static inline const union mips_vdso_data *get_vdso_data(void)
static inline void __iomem *get_gic(const union mips_vdso_data *data)
{
- return (void __iomem *)data - PAGE_SIZE;
+ return (void __iomem *)((unsigned long)data & PAGE_MASK) - PAGE_SIZE;
}
#endif /* CONFIG_CLKSRC_MIPS_GIC */
--
2.30.2
From: Gerd Rausch <[email protected]>
[ Upstream commit 74f160ead74bfe5f2b38afb4fcf86189f9ff40c9 ]
Fix a memory leak when "mda_resolve_route() is called more than once on
the same "rdma_cm_id".
This is possible if cma_query_handler() triggers the
RDMA_CM_EVENT_ROUTE_ERROR flow which puts the state machine back and
allows rdma_resolve_route() to be called again.
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Gerd Rausch <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/infiniband/core/cma.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/infiniband/core/cma.c b/drivers/infiniband/core/cma.c
index b59a4a819aaa..b5e7bd23857e 100644
--- a/drivers/infiniband/core/cma.c
+++ b/drivers/infiniband/core/cma.c
@@ -2227,7 +2227,8 @@ static int cma_resolve_ib_route(struct rdma_id_private *id_priv, int timeout_ms)
work->new_state = RDMA_CM_ROUTE_RESOLVED;
work->event.event = RDMA_CM_EVENT_ROUTE_RESOLVED;
- route->path_rec = kmalloc(sizeof *route->path_rec, GFP_KERNEL);
+ if (!route->path_rec)
+ route->path_rec = kmalloc(sizeof *route->path_rec, GFP_KERNEL);
if (!route->path_rec) {
ret = -ENOMEM;
goto err1;
--
2.30.2
From: Zou Wei <[email protected]>
[ Upstream commit d0212f095ab56672f6f36aabc605bda205e1e0bf ]
This driver's remove path calls del_timer(). However, that function
does not wait until the timer handler finishes. This means that the
timer handler may still be running after the driver's remove function
has finished, which would result in a use-after-free.
Fix by calling del_timer_sync(), which makes sure the timer handler
has finished, and unable to re-schedule itself.
Reported-by: Hulk Robot <[email protected]>
Signed-off-by: Zou Wei <[email protected]>
Reviewed-by: Guenter Roeck <[email protected]>
Acked-by: Vladimir Zapolskiy <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Guenter Roeck <[email protected]>
Signed-off-by: Wim Van Sebroeck <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/watchdog/lpc18xx_wdt.c | 2 +-
drivers/watchdog/w83877f_wdt.c | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/watchdog/lpc18xx_wdt.c b/drivers/watchdog/lpc18xx_wdt.c
index ab7b8b185d99..fbdc0f32e666 100644
--- a/drivers/watchdog/lpc18xx_wdt.c
+++ b/drivers/watchdog/lpc18xx_wdt.c
@@ -309,7 +309,7 @@ static int lpc18xx_wdt_remove(struct platform_device *pdev)
unregister_restart_handler(&lpc18xx_wdt->restart_handler);
dev_warn(&pdev->dev, "I quit now, hardware will probably reboot!\n");
- del_timer(&lpc18xx_wdt->timer);
+ del_timer_sync(&lpc18xx_wdt->timer);
watchdog_unregister_device(&lpc18xx_wdt->wdt_dev);
clk_disable_unprepare(lpc18xx_wdt->wdt_clk);
diff --git a/drivers/watchdog/w83877f_wdt.c b/drivers/watchdog/w83877f_wdt.c
index f0483c75ed32..4b52cf321747 100644
--- a/drivers/watchdog/w83877f_wdt.c
+++ b/drivers/watchdog/w83877f_wdt.c
@@ -170,7 +170,7 @@ static void wdt_startup(void)
static void wdt_turnoff(void)
{
/* Stop the timer */
- del_timer(&timer);
+ del_timer_sync(&timer);
wdt_change(WDT_DISABLE);
--
2.30.2
From: Zou Wei <[email protected]>
[ Upstream commit 4700ef326556ed74aba188f12396740a8c1c21dd ]
This patch adds/modifies MODULE_DEVICE_TABLE definition which generates
correct modalias for automatic loading of this driver when it is built
as an external module.
Reported-by: Hulk Robot <[email protected]>
Signed-off-by: Zou Wei <[email protected]>
Signed-off-by: Lee Jones <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/mfd/da9052-i2c.c | 1 +
drivers/mfd/stmpe-i2c.c | 2 +-
2 files changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/mfd/da9052-i2c.c b/drivers/mfd/da9052-i2c.c
index 2697ffb08009..2992fd94bc0c 100644
--- a/drivers/mfd/da9052-i2c.c
+++ b/drivers/mfd/da9052-i2c.c
@@ -118,6 +118,7 @@ static const struct i2c_device_id da9052_i2c_id[] = {
{"da9053-bc", DA9053_BC},
{}
};
+MODULE_DEVICE_TABLE(i2c, da9052_i2c_id);
#ifdef CONFIG_OF
static const struct of_device_id dialog_dt_ids[] = {
diff --git a/drivers/mfd/stmpe-i2c.c b/drivers/mfd/stmpe-i2c.c
index c3f4aab53b07..663a6c1c3d0d 100644
--- a/drivers/mfd/stmpe-i2c.c
+++ b/drivers/mfd/stmpe-i2c.c
@@ -107,7 +107,7 @@ static const struct i2c_device_id stmpe_i2c_id[] = {
{ "stmpe2403", STMPE2403 },
{ }
};
-MODULE_DEVICE_TABLE(i2c, stmpe_id);
+MODULE_DEVICE_TABLE(i2c, stmpe_i2c_id);
static struct i2c_driver stmpe_i2c_driver = {
.driver = {
--
2.30.2
From: Krzysztof Kozlowski <[email protected]>
[ Upstream commit fd2f1717966535b7d0b6fe45cf0d79e94330da5f ]
There is no "max_brightness" property as pointed out by dtschema:
arch/arm/boot/dts/exynos5422-odroidxu4.dt.yaml: led-controller: led-1: 'max-brightness' is a required property
Fixes: 6658356014cb ("ARM: dts: Add support Odroid XU4 board for exynos5422-odroidxu4")
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm/boot/dts/exynos5422-odroidxu4.dts | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/exynos5422-odroidxu4.dts b/arch/arm/boot/dts/exynos5422-odroidxu4.dts
index 2faf88627a48..b45e2a0c3908 100644
--- a/arch/arm/boot/dts/exynos5422-odroidxu4.dts
+++ b/arch/arm/boot/dts/exynos5422-odroidxu4.dts
@@ -26,7 +26,7 @@
label = "blue:heartbeat";
pwms = <&pwm 2 2000000 0>;
pwm-names = "pwm2";
- max_brightness = <255>;
+ max-brightness = <255>;
linux,default-trigger = "heartbeat";
};
};
--
2.30.2
From: Sherry Sun <[email protected]>
[ Upstream commit fcb10ee27fb91b25b68d7745db9817ecea9f1038 ]
We should be very careful about the register values that will be used
for division or modulo operations, althrough the possibility that the
UARTBAUD register value is zero is very low, but we had better to deal
with the "bad data" of hardware in advance to avoid division or modulo
by zero leading to undefined kernel behavior.
Signed-off-by: Sherry Sun <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/tty/serial/fsl_lpuart.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/tty/serial/fsl_lpuart.c b/drivers/tty/serial/fsl_lpuart.c
index 1544a7cc76ff..1319f3dd5b70 100644
--- a/drivers/tty/serial/fsl_lpuart.c
+++ b/drivers/tty/serial/fsl_lpuart.c
@@ -1681,6 +1681,9 @@ lpuart32_console_get_options(struct lpuart_port *sport, int *baud,
bd = lpuart32_read(sport->port.membase + UARTBAUD);
bd &= UARTBAUD_SBR_MASK;
+ if (!bd)
+ return;
+
sbr = bd;
uartclk = clk_get_rate(sport->clk);
/*
--
2.30.2
From: Christophe JAILLET <[email protected]>
[ Upstream commit 030e4138d11fced3b831c2761e4cecf347bae99c ]
If an error occurs after a pci_enable_pcie_error_reporting() call, it must
be undone by a corresponding pci_disable_pcie_error_reporting() call, as
already done in the remove function.
Link: https://lore.kernel.org/r/77adb02cfea7f1364e5603ecf3930d8597ae356e.1623482155.git.christophe.jaillet@wanadoo.fr
Fixes: 3567f36a09d1 ("[SCSI] be2iscsi: Fix AER handling in driver")
Signed-off-by: Christophe JAILLET <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/scsi/be2iscsi/be_main.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/scsi/be2iscsi/be_main.c b/drivers/scsi/be2iscsi/be_main.c
index 758f76e88704..c89aab5e0ef8 100644
--- a/drivers/scsi/be2iscsi/be_main.c
+++ b/drivers/scsi/be2iscsi/be_main.c
@@ -5812,6 +5812,7 @@ hba_free:
pci_disable_msix(phba->pcidev);
pci_dev_put(phba->pcidev);
iscsi_host_free(phba->shost);
+ pci_disable_pcie_error_reporting(pcidev);
pci_set_drvdata(pcidev, NULL);
disable_pci:
pci_release_regions(pcidev);
--
2.30.2
From: Nick Desaulniers <[email protected]>
[ Upstream commit 8b95a7d90ce8160ac5cffd5bace6e2eba01a871e ]
There's a few instructions that GAS infers operands but Clang doesn't;
from what I can tell the Arm ARM doesn't say these are optional.
F5.1.257 TBB, TBH T1 Halfword variant
F5.1.238 STREXD T1 variant
F5.1.84 LDREXD T1 variant
Link: https://github.com/ClangBuiltLinux/linux/issues/1309
Signed-off-by: Nick Desaulniers <[email protected]>
Reviewed-by: Jian Cai <[email protected]>
Signed-off-by: Russell King <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm/probes/kprobes/test-thumb.c | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/arch/arm/probes/kprobes/test-thumb.c b/arch/arm/probes/kprobes/test-thumb.c
index b683b4517458..4254391f3906 100644
--- a/arch/arm/probes/kprobes/test-thumb.c
+++ b/arch/arm/probes/kprobes/test-thumb.c
@@ -444,21 +444,21 @@ void kprobe_thumb32_test_cases(void)
"3: mvn r0, r0 \n\t"
"2: nop \n\t")
- TEST_RX("tbh [pc, r",7, (9f-(1f+4))>>1,"]",
+ TEST_RX("tbh [pc, r",7, (9f-(1f+4))>>1,", lsl #1]",
"9: \n\t"
".short (2f-1b-4)>>1 \n\t"
".short (3f-1b-4)>>1 \n\t"
"3: mvn r0, r0 \n\t"
"2: nop \n\t")
- TEST_RX("tbh [pc, r",12, ((9f-(1f+4))>>1)+1,"]",
+ TEST_RX("tbh [pc, r",12, ((9f-(1f+4))>>1)+1,", lsl #1]",
"9: \n\t"
".short (2f-1b-4)>>1 \n\t"
".short (3f-1b-4)>>1 \n\t"
"3: mvn r0, r0 \n\t"
"2: nop \n\t")
- TEST_RRX("tbh [r",1,9f, ", r",14,1,"]",
+ TEST_RRX("tbh [r",1,9f, ", r",14,1,", lsl #1]",
"9: \n\t"
".short (2f-1b-4)>>1 \n\t"
".short (3f-1b-4)>>1 \n\t"
@@ -471,10 +471,10 @@ void kprobe_thumb32_test_cases(void)
TEST_UNSUPPORTED("strexb r0, r1, [r2]")
TEST_UNSUPPORTED("strexh r0, r1, [r2]")
- TEST_UNSUPPORTED("strexd r0, r1, [r2]")
+ TEST_UNSUPPORTED("strexd r0, r1, r2, [r2]")
TEST_UNSUPPORTED("ldrexb r0, [r1]")
TEST_UNSUPPORTED("ldrexh r0, [r1]")
- TEST_UNSUPPORTED("ldrexd r0, [r1]")
+ TEST_UNSUPPORTED("ldrexd r0, r1, [r1]")
TEST_GROUP("Data-processing (shifted register) and (modified immediate)")
--
2.30.2
From: Randy Dunlap <[email protected]>
[ Upstream commit 97e488073cfca0eea84450169ca4cbfcc64e33e3 ]
Use DISABLE_BRANCH_PROFILING for arch/mips/boot/compressed/decompress.o
to prevent linkage errors.
mips64-linux-ld: arch/mips/boot/compressed/decompress.o: in function `LZ4_decompress_fast_extDict':
decompress.c:(.text+0x8c): undefined reference to `ftrace_likely_update'
mips64-linux-ld: decompress.c:(.text+0xf4): undefined reference to `ftrace_likely_update'
mips64-linux-ld: decompress.c:(.text+0x200): undefined reference to `ftrace_likely_update'
mips64-linux-ld: decompress.c:(.text+0x230): undefined reference to `ftrace_likely_update'
mips64-linux-ld: decompress.c:(.text+0x320): undefined reference to `ftrace_likely_update'
mips64-linux-ld: arch/mips/boot/compressed/decompress.o:decompress.c:(.text+0x3f4): more undefined references to `ftrace_likely_update' follow
Fixes: e76e1fdfa8f8 ("lib: add support for LZ4-compressed kernel")
Reported-by: kernel test robot <[email protected]>
Signed-off-by: Randy Dunlap <[email protected]>
Cc: Thomas Bogendoerfer <[email protected]>
Cc: [email protected]
Cc: Kyungsik Lee <[email protected]>
Signed-off-by: Thomas Bogendoerfer <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/mips/boot/compressed/decompress.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/arch/mips/boot/compressed/decompress.c b/arch/mips/boot/compressed/decompress.c
index 080cd53bac36..a1a54a3af03b 100644
--- a/arch/mips/boot/compressed/decompress.c
+++ b/arch/mips/boot/compressed/decompress.c
@@ -11,6 +11,8 @@
* option) any later version.
*/
+#define DISABLE_BRANCH_PROFILING
+
#include <linux/types.h>
#include <linux/kernel.h>
#include <linux/string.h>
--
2.30.2
From: Srinivas Neeli <[email protected]>
[ Upstream commit a51b2fb94b04ab71e53a71b9fad03fa826941254 ]
Return value of "pm_runtime_get_sync" API was neither captured nor checked.
Fixed it by capturing the return value and then checking for any warning.
Addresses-Coverity: "check_return"
Signed-off-by: Srinivas Neeli <[email protected]>
Signed-off-by: Bartosz Golaszewski <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpio/gpio-zynq.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/drivers/gpio/gpio-zynq.c b/drivers/gpio/gpio-zynq.c
index 8abeacac5885..ccfdf5a45998 100644
--- a/drivers/gpio/gpio-zynq.c
+++ b/drivers/gpio/gpio-zynq.c
@@ -764,8 +764,11 @@ err_disable_clk:
static int zynq_gpio_remove(struct platform_device *pdev)
{
struct zynq_gpio *gpio = platform_get_drvdata(pdev);
+ int ret;
- pm_runtime_get_sync(&pdev->dev);
+ ret = pm_runtime_get_sync(&pdev->dev);
+ if (ret < 0)
+ dev_warn(&pdev->dev, "pm_runtime_get_sync() Failed\n");
gpiochip_remove(&gpio->chip);
clk_disable_unprepare(gpio->clk);
device_set_wakeup_capable(&pdev->dev, 0);
--
2.30.2
From: Ruslan Bilovol <[email protected]>
[ Upstream commit 33cb46c4676d01956811b68a29157ea969a5df70 ]
Running sparse checker it shows warning message about
incorrect endianness used for descriptor initialization:
| f_hid.c:91:43: warning: incorrect type in initializer (different base types)
| f_hid.c:91:43: expected restricted __le16 [usertype] bcdHID
| f_hid.c:91:43: got int
Fixing issue with cpu_to_le16() macro, however this is not a real issue
as the value is the same both endians.
Cc: Fabien Chouteau <[email protected]>
Cc: Segiy Stetsyuk <[email protected]>
Signed-off-by: Ruslan Bilovol <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/usb/gadget/function/f_hid.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/usb/gadget/function/f_hid.c b/drivers/usb/gadget/function/f_hid.c
index a5dae5bb62ab..590e056d3618 100644
--- a/drivers/usb/gadget/function/f_hid.c
+++ b/drivers/usb/gadget/function/f_hid.c
@@ -91,7 +91,7 @@ static struct usb_interface_descriptor hidg_interface_desc = {
static struct hid_descriptor hidg_desc = {
.bLength = sizeof hidg_desc,
.bDescriptorType = HID_DT_HID,
- .bcdHID = 0x0101,
+ .bcdHID = cpu_to_le16(0x0101),
.bCountryCode = 0x00,
.bNumDescriptors = 0x1,
/*.desc[0].bDescriptorType = DYNAMIC */
--
2.30.2
From: Zhen Lei <[email protected]>
[ Upstream commit 7d3865a10b9ff2669c531d5ddd60bf46b3d48f1e ]
When devm_kcalloc() fails, the error code -ENOMEM should be returned
instead of -EINVAL.
Signed-off-by: Zhen Lei <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/soc/soc-core.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/sound/soc/soc-core.c b/sound/soc/soc-core.c
index b927f9c81d92..e69a7f8b6163 100644
--- a/sound/soc/soc-core.c
+++ b/sound/soc/soc-core.c
@@ -3394,7 +3394,7 @@ int snd_soc_of_parse_audio_routing(struct snd_soc_card *card,
if (!routes) {
dev_err(card->dev,
"ASoC: Could not allocate DAPM route table\n");
- return -EINVAL;
+ return -ENOMEM;
}
for (i = 0; i < num_routes; i++) {
--
2.30.2
From: James Smart <[email protected]>
[ Upstream commit e30d55137edef47434c40d7570276a0846fe922c ]
An 'unexpected timeout' message may be seen in a point-2-point topology.
The message occurs when a PLOGI is received before the driver is notified
of FLOGI completion. The FLOGI completion failure causes discovery to be
triggered for a second time. The discovery timer is restarted but no new
discovery activity is initiated, thus the timeout message eventually
appears.
In point-2-point, when discovery has progressed before the FLOGI completion
is processed, it is not a failure. Add code to FLOGI completion to detect
that discovery has progressed and exit the FLOGI handling (noop'ing it).
Link: https://lore.kernel.org/r/[email protected]
Co-developed-by: Justin Tee <[email protected]>
Signed-off-by: Justin Tee <[email protected]>
Signed-off-by: James Smart <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/scsi/lpfc/lpfc_els.c | 9 +++++++++
1 file changed, 9 insertions(+)
diff --git a/drivers/scsi/lpfc/lpfc_els.c b/drivers/scsi/lpfc/lpfc_els.c
index 5be938b47f48..b66b1ed6d2af 100644
--- a/drivers/scsi/lpfc/lpfc_els.c
+++ b/drivers/scsi/lpfc/lpfc_els.c
@@ -1142,6 +1142,15 @@ stop_rr_fcf_flogi:
phba->fcf.fcf_redisc_attempted = 0; /* reset */
goto out;
}
+ } else if (vport->port_state > LPFC_FLOGI &&
+ vport->fc_flag & FC_PT2PT) {
+ /*
+ * In a p2p topology, it is possible that discovery has
+ * already progressed, and this completion can be ignored.
+ * Recheck the indicated topology.
+ */
+ if (!sp->cmn.fPort)
+ goto out;
}
flogifail:
--
2.30.2
From: Jeff Layton <[email protected]>
[ Upstream commit 22d41cdcd3cfd467a4af074165357fcbea1c37f5 ]
The checks for page->mapping are odd, as set_page_dirty is an
address_space operation, and I don't see where it would be called on a
non-pagecache page.
The warning about the page lock also seems bogus. The comment over
set_page_dirty() says that it can be called without the page lock in
some rare cases. I don't think we want to warn if that's the case.
Reported-by: Matthew Wilcox <[email protected]>
Signed-off-by: Jeff Layton <[email protected]>
Signed-off-by: Ilya Dryomov <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/ceph/addr.c | 10 +---------
1 file changed, 1 insertion(+), 9 deletions(-)
diff --git a/fs/ceph/addr.c b/fs/ceph/addr.c
index fbf383048409..26de74684c17 100644
--- a/fs/ceph/addr.c
+++ b/fs/ceph/addr.c
@@ -72,10 +72,6 @@ static int ceph_set_page_dirty(struct page *page)
struct inode *inode;
struct ceph_inode_info *ci;
struct ceph_snap_context *snapc;
- int ret;
-
- if (unlikely(!mapping))
- return !TestSetPageDirty(page);
if (PageDirty(page)) {
dout("%p set_page_dirty %p idx %lu -- already dirty\n",
@@ -121,11 +117,7 @@ static int ceph_set_page_dirty(struct page *page)
page->private = (unsigned long)snapc;
SetPagePrivate(page);
- ret = __set_page_dirty_nobuffers(page);
- WARN_ON(!PageLocked(page));
- WARN_ON(!page->mapping);
-
- return ret;
+ return __set_page_dirty_nobuffers(page);
}
/*
--
2.30.2
From: Mike Christie <[email protected]>
[ Upstream commit b1d19e8c92cfb0ded180ef3376c20e130414e067 ]
There are a couple places where we could free the iscsi_cls_conn while it's
still in use. This adds some helpers to get/put a refcount on the struct
and converts an exiting user. Subsequent commits will then use the helpers
to fix 2 bugs in the eh code.
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Lee Duncan <[email protected]>
Signed-off-by: Mike Christie <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/scsi/libiscsi.c | 7 ++-----
drivers/scsi/scsi_transport_iscsi.c | 12 ++++++++++++
include/scsi/scsi_transport_iscsi.h | 2 ++
3 files changed, 16 insertions(+), 5 deletions(-)
diff --git a/drivers/scsi/libiscsi.c b/drivers/scsi/libiscsi.c
index 18b8d86ef74b..0713d02cf112 100644
--- a/drivers/scsi/libiscsi.c
+++ b/drivers/scsi/libiscsi.c
@@ -1384,7 +1384,6 @@ void iscsi_session_failure(struct iscsi_session *session,
enum iscsi_err err)
{
struct iscsi_conn *conn;
- struct device *dev;
spin_lock_bh(&session->frwd_lock);
conn = session->leadconn;
@@ -1393,10 +1392,8 @@ void iscsi_session_failure(struct iscsi_session *session,
return;
}
- dev = get_device(&conn->cls_conn->dev);
+ iscsi_get_conn(conn->cls_conn);
spin_unlock_bh(&session->frwd_lock);
- if (!dev)
- return;
/*
* if the host is being removed bypass the connection
* recovery initialization because we are going to kill
@@ -1406,7 +1403,7 @@ void iscsi_session_failure(struct iscsi_session *session,
iscsi_conn_error_event(conn->cls_conn, err);
else
iscsi_conn_failure(conn, err);
- put_device(dev);
+ iscsi_put_conn(conn->cls_conn);
}
EXPORT_SYMBOL_GPL(iscsi_session_failure);
diff --git a/drivers/scsi/scsi_transport_iscsi.c b/drivers/scsi/scsi_transport_iscsi.c
index 42bc4b71b0ba..e0159e6a1065 100644
--- a/drivers/scsi/scsi_transport_iscsi.c
+++ b/drivers/scsi/scsi_transport_iscsi.c
@@ -2328,6 +2328,18 @@ int iscsi_destroy_conn(struct iscsi_cls_conn *conn)
}
EXPORT_SYMBOL_GPL(iscsi_destroy_conn);
+void iscsi_put_conn(struct iscsi_cls_conn *conn)
+{
+ put_device(&conn->dev);
+}
+EXPORT_SYMBOL_GPL(iscsi_put_conn);
+
+void iscsi_get_conn(struct iscsi_cls_conn *conn)
+{
+ get_device(&conn->dev);
+}
+EXPORT_SYMBOL_GPL(iscsi_get_conn);
+
/*
* iscsi interface functions
*/
diff --git a/include/scsi/scsi_transport_iscsi.h b/include/scsi/scsi_transport_iscsi.h
index 6183d20a01fb..e673c7c9c5fb 100644
--- a/include/scsi/scsi_transport_iscsi.h
+++ b/include/scsi/scsi_transport_iscsi.h
@@ -437,6 +437,8 @@ extern void iscsi_free_session(struct iscsi_cls_session *session);
extern int iscsi_destroy_session(struct iscsi_cls_session *session);
extern struct iscsi_cls_conn *iscsi_create_conn(struct iscsi_cls_session *sess,
int dd_size, uint32_t cid);
+extern void iscsi_put_conn(struct iscsi_cls_conn *conn);
+extern void iscsi_get_conn(struct iscsi_cls_conn *conn);
extern int iscsi_destroy_conn(struct iscsi_cls_conn *conn);
extern void iscsi_unblock_session(struct iscsi_cls_session *session);
extern void iscsi_block_session(struct iscsi_cls_session *session);
--
2.30.2
From: Linus Walleij <[email protected]>
[ Upstream commit 5bcb5087c9dd3dca1ff0ebd8002c5313c9332b56 ]
Sometimes the code will crash because we haven't enabled
AC or USB charging and thus not created the corresponding
psy device. Fix it by checking that it is there before
notifying.
Signed-off-by: Linus Walleij <[email protected]>
Signed-off-by: Sebastian Reichel <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/power/ab8500_charger.c | 18 +++++++++++++++++-
1 file changed, 17 insertions(+), 1 deletion(-)
diff --git a/drivers/power/ab8500_charger.c b/drivers/power/ab8500_charger.c
index e388171f4e58..98724c3a28e5 100644
--- a/drivers/power/ab8500_charger.c
+++ b/drivers/power/ab8500_charger.c
@@ -409,6 +409,14 @@ disable_otp:
static void ab8500_power_supply_changed(struct ab8500_charger *di,
struct power_supply *psy)
{
+ /*
+ * This happens if we get notifications or interrupts and
+ * the platform has been configured not to support one or
+ * other type of charging.
+ */
+ if (!psy)
+ return;
+
if (di->autopower_cfg) {
if (!di->usb.charger_connected &&
!di->ac.charger_connected &&
@@ -435,7 +443,15 @@ static void ab8500_charger_set_usb_connected(struct ab8500_charger *di,
if (!connected)
di->flags.vbus_drop_end = false;
- sysfs_notify(&di->usb_chg.psy->dev.kobj, NULL, "present");
+ /*
+ * Sometimes the platform is configured not to support
+ * USB charging and no psy has been created, but we still
+ * will get these notifications.
+ */
+ if (di->usb_chg.psy) {
+ sysfs_notify(&di->usb_chg.psy->dev.kobj, NULL,
+ "present");
+ }
if (connected) {
mutex_lock(&di->charger_attached_mutex);
--
2.30.2
From: Uwe Kleine-König <[email protected]>
[ Upstream commit b601a18f12383001e7a8da238de7ca1559ebc450 ]
A consumer is expected to disable a PWM before calling pwm_put(). And if
they didn't there is hopefully a good reason (or the consumer needs
fixing). Also if disabling an enabled PWM was the right thing to do,
this should better be done in the framework instead of in each low level
driver.
So drop the hardware modification from the .remove() callback.
Signed-off-by: Uwe Kleine-König <[email protected]>
Signed-off-by: Thierry Reding <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/pwm/pwm-spear.c | 4 ----
1 file changed, 4 deletions(-)
diff --git a/drivers/pwm/pwm-spear.c b/drivers/pwm/pwm-spear.c
index 6c6b44fd3f43..2d11ac277de8 100644
--- a/drivers/pwm/pwm-spear.c
+++ b/drivers/pwm/pwm-spear.c
@@ -231,10 +231,6 @@ static int spear_pwm_probe(struct platform_device *pdev)
static int spear_pwm_remove(struct platform_device *pdev)
{
struct spear_pwm_chip *pc = platform_get_drvdata(pdev);
- int i;
-
- for (i = 0; i < NUM_PWM; i++)
- pwm_disable(&pc->chip.pwms[i]);
/* clk was prepared in probe, hence unprepare it here */
clk_unprepare(pc->clk);
--
2.30.2
From: Zou Wei <[email protected]>
[ Upstream commit dfe52db13ab8d24857a9840ec7ca75eef800c26c ]
This patch adds missing MODULE_DEVICE_TABLE definition which generates
correct modalias for automatic loading of this driver when it is built
as an external module.
Reported-by: Hulk Robot <[email protected]>
Signed-off-by: Zou Wei <[email protected]>
Signed-off-by: Sebastian Reichel <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/power/ab8500_btemp.c | 1 +
drivers/power/ab8500_charger.c | 1 +
drivers/power/ab8500_fg.c | 1 +
3 files changed, 3 insertions(+)
diff --git a/drivers/power/ab8500_btemp.c b/drivers/power/ab8500_btemp.c
index 8f8044e1acf3..24732df01cf9 100644
--- a/drivers/power/ab8500_btemp.c
+++ b/drivers/power/ab8500_btemp.c
@@ -1186,6 +1186,7 @@ static const struct of_device_id ab8500_btemp_match[] = {
{ .compatible = "stericsson,ab8500-btemp", },
{ },
};
+MODULE_DEVICE_TABLE(of, ab8500_btemp_match);
static struct platform_driver ab8500_btemp_driver = {
.probe = ab8500_btemp_probe,
diff --git a/drivers/power/ab8500_charger.c b/drivers/power/ab8500_charger.c
index 98724c3a28e5..1a7013ec0caf 100644
--- a/drivers/power/ab8500_charger.c
+++ b/drivers/power/ab8500_charger.c
@@ -3756,6 +3756,7 @@ static const struct of_device_id ab8500_charger_match[] = {
{ .compatible = "stericsson,ab8500-charger", },
{ },
};
+MODULE_DEVICE_TABLE(of, ab8500_charger_match);
static struct platform_driver ab8500_charger_driver = {
.probe = ab8500_charger_probe,
diff --git a/drivers/power/ab8500_fg.c b/drivers/power/ab8500_fg.c
index d91111200dde..c58b496ca05a 100644
--- a/drivers/power/ab8500_fg.c
+++ b/drivers/power/ab8500_fg.c
@@ -3239,6 +3239,7 @@ static const struct of_device_id ab8500_fg_match[] = {
{ .compatible = "stericsson,ab8500-fg", },
{ },
};
+MODULE_DEVICE_TABLE(of, ab8500_fg_match);
static struct platform_driver ab8500_fg_driver = {
.probe = ab8500_fg_probe,
--
2.30.2
From: Zou Wei <[email protected]>
[ Upstream commit 073b5d5b1f9cc94a3eea25279fbafee3f4f5f097 ]
This patch adds missing MODULE_DEVICE_TABLE definition which generates
correct modalias for automatic loading of this driver when it is built
as an external module.
Reported-by: Hulk Robot <[email protected]>
Signed-off-by: Zou Wei <[email protected]>
Signed-off-by: Sebastian Reichel <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/power/charger-manager.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/power/charger-manager.c b/drivers/power/charger-manager.c
index 1ea5d1aa268b..6656f847ed93 100644
--- a/drivers/power/charger-manager.c
+++ b/drivers/power/charger-manager.c
@@ -1490,6 +1490,7 @@ static const struct of_device_id charger_manager_match[] = {
},
{},
};
+MODULE_DEVICE_TABLE(of, charger_manager_match);
static struct charger_desc *of_cm_parse_desc(struct device *dev)
{
--
2.30.2
From: Nathan Chancellor <[email protected]>
[ Upstream commit 681ba73c72302214686401e707e2087ed11a6556 ]
ld.lld warns that the '.modinfo' section is not currently handled:
ld.lld: warning: kernel/built-in.a(workqueue.o):(.modinfo) is being placed in '.modinfo'
ld.lld: warning: kernel/built-in.a(printk/printk.o):(.modinfo) is being placed in '.modinfo'
ld.lld: warning: kernel/built-in.a(irq/spurious.o):(.modinfo) is being placed in '.modinfo'
ld.lld: warning: kernel/built-in.a(rcu/update.o):(.modinfo) is being placed in '.modinfo'
The '.modinfo' section was added in commit 898490c010b5 ("moduleparam:
Save information about built-in modules in separate file") to the DISCARDS
macro but Hexagon has never used that macro. The unification of DISCARDS
happened in commit 023bf6f1b8bf ("linker script: unify usage of discard
definition") in 2009, prior to Hexagon being added in 2011.
Switch Hexagon over to the DISCARDS macro so that anything that is
expected to be discarded gets discarded.
Link: https://lkml.kernel.org/r/[email protected]
Fixes: e95bf452a9e2 ("Hexagon: Add configuration and makefiles for the Hexagon architecture.")
Signed-off-by: Nathan Chancellor <[email protected]>
Reviewed-by: Nick Desaulniers <[email protected]>
Acked-by: Brian Cain <[email protected]>
Cc: David Rientjes <[email protected]>
Cc: Oliver Glitta <[email protected]>
Cc: Vlastimil Babka <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/hexagon/kernel/vmlinux.lds.S | 7 +------
1 file changed, 1 insertion(+), 6 deletions(-)
diff --git a/arch/hexagon/kernel/vmlinux.lds.S b/arch/hexagon/kernel/vmlinux.lds.S
index 5f268c1071b3..b5c050fe23a5 100644
--- a/arch/hexagon/kernel/vmlinux.lds.S
+++ b/arch/hexagon/kernel/vmlinux.lds.S
@@ -70,13 +70,8 @@ SECTIONS
_end = .;
- /DISCARD/ : {
- EXIT_TEXT
- EXIT_DATA
- EXIT_CALL
- }
-
STABS_DEBUG
DWARF_DEBUG
+ DISCARDS
}
--
2.30.2
From: Krzysztof Kozlowski <[email protected]>
[ Upstream commit 8e0d09b1232d0538066c40ed4c13086faccbdff6 ]
On probe error the driver should free the memory allocated for private
structure. Fix this by using resource-managed allocation.
Fixes: a20cbdeffce2 ("powerpc/fsl: Add support for Integrated Flash Controller")
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/memory/fsl_ifc.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/memory/fsl_ifc.c b/drivers/memory/fsl_ifc.c
index 040be4638140..65b984d64350 100644
--- a/drivers/memory/fsl_ifc.c
+++ b/drivers/memory/fsl_ifc.c
@@ -107,7 +107,6 @@ static int fsl_ifc_ctrl_remove(struct platform_device *dev)
iounmap(ctrl->regs);
dev_set_drvdata(&dev->dev, NULL);
- kfree(ctrl);
return 0;
}
@@ -218,7 +217,8 @@ static int fsl_ifc_ctrl_probe(struct platform_device *dev)
dev_info(&dev->dev, "Freescale Integrated Flash Controller\n");
- fsl_ifc_ctrl_dev = kzalloc(sizeof(*fsl_ifc_ctrl_dev), GFP_KERNEL);
+ fsl_ifc_ctrl_dev = devm_kzalloc(&dev->dev, sizeof(*fsl_ifc_ctrl_dev),
+ GFP_KERNEL);
if (!fsl_ifc_ctrl_dev)
return -ENOMEM;
--
2.30.2
From: Jiapeng Chong <[email protected]>
[ Upstream commit 492109333c29e1bb16d8732e1d597b02e8e0bf2e ]
The error code is missing in this code scenario, add the error code
'-EINVAL' to the return value 'rc.
Eliminate the follow smatch warning:
fs/jfs/jfs_logmgr.c:1327 lmLogInit() warn: missing error code 'rc'.
Reported-by: Abaci Robot <[email protected]>
Signed-off-by: Jiapeng Chong <[email protected]>
Signed-off-by: Dave Kleikamp <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/jfs/jfs_logmgr.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/fs/jfs/jfs_logmgr.c b/fs/jfs/jfs_logmgr.c
index a69bdf2a1085..d19542a88c2c 100644
--- a/fs/jfs/jfs_logmgr.c
+++ b/fs/jfs/jfs_logmgr.c
@@ -1339,6 +1339,7 @@ int lmLogInit(struct jfs_log * log)
} else {
if (memcmp(logsuper->uuid, log->uuid, 16)) {
jfs_warn("wrong uuid on JFS log device");
+ rc = -EINVAL;
goto errout20;
}
log->size = le32_to_cpu(logsuper->size);
--
2.30.2
From: Xie Yongji <[email protected]>
[ Upstream commit b71ba22e7c6c6b279c66f53ee7818709774efa1f ]
The vblk->vqs should be freed before we call init_vqs()
in virtblk_restore().
Signed-off-by: Xie Yongji <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Acked-by: Jason Wang <[email protected]>
Signed-off-by: Michael S. Tsirkin <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/block/virtio_blk.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/block/virtio_blk.c b/drivers/block/virtio_blk.c
index bdc3efacd0d2..2bcc2bc64149 100644
--- a/drivers/block/virtio_blk.c
+++ b/drivers/block/virtio_blk.c
@@ -808,6 +808,8 @@ static int virtblk_freeze(struct virtio_device *vdev)
blk_mq_stop_hw_queues(vblk->disk->queue);
vdev->config->del_vqs(vdev);
+ kfree(vblk->vqs);
+
return 0;
}
--
2.30.2
From: Zhen Lei <[email protected]>
[ Upstream commit 31028cbed26a8afa25533a10425ffa2ab794c76c ]
When 'SB_HW_16' check fails, the error code -ENODEV instead of 0 should be
returned, which is the same as that returned when 'WSS_HW_CMI8330' check
fails.
Fixes: 43bcd973d6d0 ("[ALSA] Add snd_card_set_generic_dev() call to ISA drivers")
Reported-by: Hulk Robot <[email protected]>
Signed-off-by: Zhen Lei <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/isa/cmi8330.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/sound/isa/cmi8330.c b/sound/isa/cmi8330.c
index dfedfd85f205..463906882b95 100644
--- a/sound/isa/cmi8330.c
+++ b/sound/isa/cmi8330.c
@@ -564,7 +564,7 @@ static int snd_cmi8330_probe(struct snd_card *card, int dev)
}
if (acard->sb->hardware != SB_HW_16) {
snd_printk(KERN_ERR PFX "SB16 not found during probe\n");
- return err;
+ return -ENODEV;
}
snd_wss_out(acard->wss, CS4231_MISC_INFO, 0x40); /* switch on MODE2 */
--
2.30.2
From: Zhen Lei <[email protected]>
[ Upstream commit b77e81fbe5f5fb4ad9a61ec80f6d1e30b6da093a ]
Fix to return a negative error code from the error handling case instead
of 0, as done elsewhere in this function.
Fixes: a3c77c67a443 ("[PATCH] uml: slirp and slip driver cleanups and fixes")
Reported-by: Hulk Robot <[email protected]>
Signed-off-by: Zhen Lei <[email protected]>
Acked-By: [email protected]
Signed-off-by: Richard Weinberger <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/um/drivers/slip_user.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/arch/um/drivers/slip_user.c b/arch/um/drivers/slip_user.c
index 0d6b66c64a81..76d155631c5d 100644
--- a/arch/um/drivers/slip_user.c
+++ b/arch/um/drivers/slip_user.c
@@ -145,7 +145,8 @@ static int slip_open(void *data)
}
sfd = err;
- if (set_up_tty(sfd))
+ err = set_up_tty(sfd);
+ if (err)
goto out_close2;
pri->slave = sfd;
--
2.30.2
From: Takashi Iwai <[email protected]>
[ Upstream commit c305366a37441c2ac90b08711cb6f032b43672f2 ]
snd_sb_qsound_destroy() contains the calls of removing the previously
created mixer controls, but it doesn't clear the pointers. As
snd_sb_qsound_destroy() itself may be repeatedly called via ioctl,
this could lead to double-free potentially.
Fix it by clearing the struct fields properly afterwards.
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/isa/sb/sb16_csp.c | 8 ++++++--
1 file changed, 6 insertions(+), 2 deletions(-)
diff --git a/sound/isa/sb/sb16_csp.c b/sound/isa/sb/sb16_csp.c
index 2cc068be7d3b..90fa57ad14c0 100644
--- a/sound/isa/sb/sb16_csp.c
+++ b/sound/isa/sb/sb16_csp.c
@@ -1086,10 +1086,14 @@ static void snd_sb_qsound_destroy(struct snd_sb_csp * p)
card = p->chip->card;
down_write(&card->controls_rwsem);
- if (p->qsound_switch)
+ if (p->qsound_switch) {
snd_ctl_remove(card, p->qsound_switch);
- if (p->qsound_space)
+ p->qsound_switch = NULL;
+ }
+ if (p->qsound_space) {
snd_ctl_remove(card, p->qsound_space);
+ p->qsound_space = NULL;
+ }
up_write(&card->controls_rwsem);
/* cancel pending transfer of QSound parameters */
--
2.30.2
From: Gao Xiang <[email protected]>
[ Upstream commit 1fcb6fcd74a222d9ead54d405842fc763bb86262 ]
When looking into another nfs xfstests report, I found acl and
default_acl in nfs3_proc_create() and nfs3_proc_mknod() error
paths are possibly leaked. Fix them in advance.
Fixes: 013cdf1088d7 ("nfs: use generic posix ACL infrastructure for v3 Posix ACLs")
Cc: Trond Myklebust <[email protected]>
Cc: Anna Schumaker <[email protected]>
Cc: Christoph Hellwig <[email protected]>
Cc: Joseph Qi <[email protected]>
Signed-off-by: Gao Xiang <[email protected]>
Signed-off-by: Trond Myklebust <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/nfs/nfs3proc.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/fs/nfs/nfs3proc.c b/fs/nfs/nfs3proc.c
index cb28cceefebe..9f365b004453 100644
--- a/fs/nfs/nfs3proc.c
+++ b/fs/nfs/nfs3proc.c
@@ -363,7 +363,7 @@ nfs3_proc_create(struct inode *dir, struct dentry *dentry, struct iattr *sattr,
break;
case NFS3_CREATE_UNCHECKED:
- goto out;
+ goto out_release_acls;
}
nfs_fattr_init(data->res.dir_attr);
nfs_fattr_init(data->res.fattr);
@@ -708,7 +708,7 @@ nfs3_proc_mknod(struct inode *dir, struct dentry *dentry, struct iattr *sattr,
break;
default:
status = -EINVAL;
- goto out;
+ goto out_release_acls;
}
status = nfs3_do_create(dir, dentry, data);
--
2.30.2
From: Zhen Lei <[email protected]>
[ Upstream commit ccf1236ecac476d9d2704866d9a476c86e387971 ]
Fix to return a negative error code from the error handling case instead
of 0, as done elsewhere in this function.
Fixes: 89df6bfc0405 ("uml: DEBUG_SHIRQ fixes")
Reported-by: Hulk Robot <[email protected]>
Signed-off-by: Zhen Lei <[email protected]>
Acked-By: [email protected]
Signed-off-by: Richard Weinberger <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/um/drivers/chan_user.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/arch/um/drivers/chan_user.c b/arch/um/drivers/chan_user.c
index 3fd7c3efdb18..feb7f5ab4084 100644
--- a/arch/um/drivers/chan_user.c
+++ b/arch/um/drivers/chan_user.c
@@ -256,7 +256,8 @@ static int winch_tramp(int fd, struct tty_port *port, int *fd_out,
goto out_close;
}
- if (os_set_fd_block(*fd_out, 0)) {
+ err = os_set_fd_block(*fd_out, 0);
+ if (err) {
printk(UM_KERN_ERR "winch_tramp: failed to set thread_fd "
"non-blocking.\n");
goto out_close;
--
2.30.2
From: Geoff Levand <[email protected]>
[ Upstream commit 9733862e50fdba55e7f1554e4286fcc5302ff28e ]
Commit f959dcd6ddfd29235030e8026471ac1b022ad2b0 (dma-direct: Fix
potential NULL pointer dereference) added a null check on the
dma_mask pointer of the kernel's device structure.
Add a dma_mask variable to the ps3_dma_region structure and set
the device structure's dma_mask pointer to point to this new variable.
Fixes runtime errors like these:
# WARNING: Fixes tag on line 10 doesn't match correct format
# WARNING: Fixes tag on line 10 doesn't match correct format
ps3_system_bus_match:349: dev=8.0(sb_01), drv=8.0(ps3flash): match
WARNING: CPU: 0 PID: 1 at kernel/dma/mapping.c:151 .dma_map_page_attrs+0x34/0x1e0
ps3flash sb_01: ps3stor_setup:193: map DMA region failed
Signed-off-by: Geoff Levand <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/562d0c9ea0100a30c3b186bcc7adb34b0bbd2cd7.1622746428.git.geoff@infradead.org
Signed-off-by: Sasha Levin <[email protected]>
---
arch/powerpc/include/asm/ps3.h | 2 ++
arch/powerpc/platforms/ps3/mm.c | 12 ++++++++++++
2 files changed, 14 insertions(+)
diff --git a/arch/powerpc/include/asm/ps3.h b/arch/powerpc/include/asm/ps3.h
index a1bc7e758422..2d729b53a556 100644
--- a/arch/powerpc/include/asm/ps3.h
+++ b/arch/powerpc/include/asm/ps3.h
@@ -83,6 +83,7 @@ struct ps3_dma_region_ops;
* @bus_addr: The 'translated' bus address of the region.
* @len: The length in bytes of the region.
* @offset: The offset from the start of memory of the region.
+ * @dma_mask: Device dma_mask.
* @ioid: The IOID of the device who owns this region
* @chunk_list: Opaque variable used by the ioc page manager.
* @region_ops: struct ps3_dma_region_ops - dma region operations
@@ -97,6 +98,7 @@ struct ps3_dma_region {
enum ps3_dma_region_type region_type;
unsigned long len;
unsigned long offset;
+ u64 dma_mask;
/* driver variables (set by ps3_dma_region_create) */
unsigned long bus_addr;
diff --git a/arch/powerpc/platforms/ps3/mm.c b/arch/powerpc/platforms/ps3/mm.c
index 19bae78b1f25..76cbf1be9962 100644
--- a/arch/powerpc/platforms/ps3/mm.c
+++ b/arch/powerpc/platforms/ps3/mm.c
@@ -18,6 +18,7 @@
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
+#include <linux/dma-mapping.h>
#include <linux/kernel.h>
#include <linux/export.h>
#include <linux/memblock.h>
@@ -1132,6 +1133,7 @@ int ps3_dma_region_init(struct ps3_system_bus_device *dev,
enum ps3_dma_region_type region_type, void *addr, unsigned long len)
{
unsigned long lpar_addr;
+ int result;
lpar_addr = addr ? ps3_mm_phys_to_lpar(__pa(addr)) : 0;
@@ -1143,6 +1145,16 @@ int ps3_dma_region_init(struct ps3_system_bus_device *dev,
r->offset -= map.r1.offset;
r->len = len ? len : _ALIGN_UP(map.total, 1 << r->page_size);
+ dev->core.dma_mask = &r->dma_mask;
+
+ result = dma_set_mask_and_coherent(&dev->core, DMA_BIT_MASK(32));
+
+ if (result < 0) {
+ dev_err(&dev->core, "%s:%d: dma_set_mask_and_coherent failed: %d\n",
+ __func__, __LINE__, result);
+ return result;
+ }
+
switch (dev->dev_type) {
case PS3_DEVICE_TYPE_SB:
r->region_ops = (USE_DYNAMIC_DMA)
--
2.30.2
From: Athira Rajeev <[email protected]>
[ Upstream commit 45677c9aebe926192e59475b35a1ff35ff2d4217 ]
The "no_handler_test" in ebb selftests attempts to read the PMU
registers twice via helper function "dump_ebb_state". First dump is
just before closing of event and the second invocation is done after
closing of the event. The original intention of second
dump_ebb_state was to dump the state of registers at the end of
the test when the counters are frozen. But this will be achieved
with the first call itself since sample period is set to low value
and PMU will be frozen by then. Hence patch removes the
dump which was done before closing of the event.
Reported-by: Shirisha Ganta <[email protected]>
Signed-off-by: Athira Rajeev <[email protected]>
Tested-by: Nageswara R Sastry <[email protected] <mailto:[email protected]>>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
tools/testing/selftests/powerpc/pmu/ebb/no_handler_test.c | 2 --
1 file changed, 2 deletions(-)
diff --git a/tools/testing/selftests/powerpc/pmu/ebb/no_handler_test.c b/tools/testing/selftests/powerpc/pmu/ebb/no_handler_test.c
index 8341d7778d5e..87630d44fb4c 100644
--- a/tools/testing/selftests/powerpc/pmu/ebb/no_handler_test.c
+++ b/tools/testing/selftests/powerpc/pmu/ebb/no_handler_test.c
@@ -50,8 +50,6 @@ static int no_handler_test(void)
event_close(&event);
- dump_ebb_state();
-
/* The real test is that we never took an EBB at 0x0 */
return 0;
--
2.30.2
Hi!
> This is the start of the stable review cycle for the 4.4.276 release.
> There are 188 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
CIP testing did not find any problems here:
https://gitlab.com/cip-project/cip-testing/linux-stable-rc-ci/-/tree/linux-4.4.y
Tested-by: Pavel Machek (CIP) <[email protected]>
Best regards,
Pavel
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
On 7/19/21 8:49 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.4.276 release.
> There are 188 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed, 21 Jul 2021 14:47:42 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.4.276-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.4.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
>
Compiled and booted on my test system. No dmesg regressions.
Tested-by: Shuah Khan <[email protected]>
thanks,
-- Shuah
On 7/19/21 7:49 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.4.276 release.
> There are 188 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed, 21 Jul 2021 14:47:42 +0000.
> Anything received after that time might be too late.
>
Building ppc:mpc8544ds:mpc85xx_defconfig:net,e1000:initrd ... failed
------------
Error log:
drivers/memory/fsl_ifc.c: In function 'fsl_ifc_ctrl_probe':
drivers/memory/fsl_ifc.c:308:28: error: 'struct fsl_ifc_ctrl' has no member named 'gregs'; did you mean 'regs'?
Looks like 'regs' was at some point renamed to 'gregs'.
Guenter
On Mon, Jul 19, 2021 at 04:49:44PM +0200, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.4.276 release.
> There are 188 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed, 21 Jul 2021 14:47:42 +0000.
> Anything received after that time might be too late.
>
Build results:
total: 160 pass: 160 fail: 0
Qemu test results:
total: 328 pass: 315 fail: 13
Failed tests:
ppc:mpc8544ds:mpc85xx_defconfig:net,e1000:initrd
ppc:mpc8544ds:mpc85xx_defconfig:scsi[53C895A]:net,ne2k_pci:rootfs
ppc:mpc8544ds:mpc85xx_defconfig:sata-sii3112:net,rtl8139:rootfs
ppc:mpc8544ds:mpc85xx_defconfig:sdhci:mmc:net,usb-ohci:rootfs
ppc:mpc8544ds:mpc85xx_smp_defconfig:net,e1000:initrd
ppc:mpc8544ds:mpc85xx_smp_defconfig:scsi[DC395]:net,i82550:rootfs
ppc:mpc8544ds:mpc85xx_smp_defconfig:scsi[53C895A]:net,usb-ohci:rootfs
ppc:mpc8544ds:mpc85xx_smp_defconfig:sata-sii3112:net,ne2k_pci:rootfs
ppc64:ppce500:corenet64_smp_defconfig:e5500:net,rtl8139:initrd
ppc64:ppce500:corenet64_smp_defconfig:e5500:net,virtio-net:nvme:rootfs
ppc64:ppce500:corenet64_smp_defconfig:e5500:net,e1000:sdhci:mmc:rootfs
ppc64:ppce500:corenet64_smp_defconfig:e5500:net,tulip:scsi[53C895A]:rootfs
ppc64:ppce500:corenet64_smp_defconfig:e5500:net,i82562:sata-sii3112:rootfs
All failed tests are due to
drivers/memory/fsl_ifc.c: In function ‘fsl_ifc_ctrl_probe’:
drivers/memory/fsl_ifc.c:308:28: error: ‘struct fsl_ifc_ctrl’ has no member named ‘gregs’; did you mean ‘regs’?
as already reported.
Guenter
Hi!
> From: Xie Yongji <[email protected]>
>
> [ Upstream commit d00d8da5869a2608e97cfede094dfc5e11462a46 ]
>
> The buf->len might come from an untrusted device. This
> ensures the value would not exceed the size of the buffer
> to avoid data corruption or loss.
Since we are not trusting the other side, do we need to use _nospec
variants to prevent speculation attacks?
Best regards,
Pavel
> +++ b/drivers/char/virtio_console.c
> @@ -487,7 +487,7 @@ static struct port_buffer *get_inbuf(struct port *port)
>
> buf = virtqueue_get_buf(port->in_vq, &len);
> if (buf) {
> - buf->len = len;
> + buf->len = min_t(size_t, len, buf->size);
> buf->offset = 0;
> port->stats.bytes_received += len;
> }
> @@ -1752,7 +1752,7 @@ static void control_work_handler(struct work_struct *work)
> while ((buf = virtqueue_get_buf(vq, &len))) {
> spin_unlock(&portdev->c_ivq_lock);
>
> - buf->len = len;
> + buf->len = min_t(size_t, len, buf->size);
> buf->offset = 0;
>
> handle_control_message(vq->vdev, portdev, buf);
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
On Mon, 19 Jul 2021 at 20:27, Greg Kroah-Hartman
<[email protected]> wrote:
>
> This is the start of the stable review cycle for the 4.4.276 release.
> There are 188 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed, 21 Jul 2021 14:47:42 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.4.276-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.4.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
Results from Linaro’s test farm.
No regressions on arm64, arm, x86_64, and i386.
Tested-by: Linux Kernel Functional Testing <[email protected]>
## Build
* kernel: 4.4.276-rc1
* git: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
* git branch: linux-4.4.y
* git commit: ffa748a4e4ff211e492aa3a41d20c4b2e4a15aca
* git describe: v4.4.275-189-gffa748a4e4ff
* test details:
https://qa-reports.linaro.org/lkft/linux-stable-rc-linux-4.4.y/build/v4.4.275-189-gffa748a4e4ff
## Regressions (compared to v4.4.275-189-g56a34275371b)
No regressions found.
Tested-by: Linux Kernel Functional Testing <[email protected]>
## Fixes (compared to v4.4.275-189-g56a34275371b)
No fixes found.
## Test result summary
total: 45986, pass: 36399, fail: 314, skip: 8033, xfail: 1240,
## Build Summary
* arm: 96 total, 96 passed, 0 failed
* arm64: 23 total, 23 passed, 0 failed
* i386: 13 total, 13 passed, 0 failed
* juno-r2: 1 total, 1 passed, 0 failed
* mips: 36 total, 36 passed, 0 failed
* sparc: 9 total, 9 passed, 0 failed
* x15: 1 total, 1 passed, 0 failed
* x86: 1 total, 1 passed, 0 failed
* x86_64: 13 total, 13 passed, 0 failed
## Test suites summary
* fwts
* install-android-platform-tools-r2600
* kselftest-android
* kselftest-bpf
* kselftest-capabilities
* kselftest-cgroup
* kselftest-clone3
* kselftest-core
* kselftest-cpu-hotplug
* kselftest-cpufreq
* kselftest-efivarfs
* kselftest-filesystems
* kselftest-firmware
* kselftest-fpu
* kselftest-futex
* kselftest-gpio
* kselftest-intel_pstate
* kselftest-ipc
* kselftest-ir
* kselftest-kcmp
* kselftest-kexec
* kselftest-kvm
* kselftest-lib
* kselftest-livepatch
* kselftest-lkdtm
* kselftest-membarrier
* kselftest-ptrace
* kselftest-rseq
* kselftest-rtc
* kselftest-seccomp
* kselftest-sigaltstack
* kselftest-size
* kselftest-splice
* kselftest-static_keys
* kselftest-sync
* kselftest-sysctl
* kselftest-timens
* kselftest-timers
* kselftest-tmpfs
* kselftest-tpm2
* kselftest-user
* kselftest-vm
* kselftest-x86
* kselftest-zram
* kvm-unit-tests
* libhugetlbfs
* linux-log-parser
* ltp-cap_bounds-tests
* ltp-commands-tests
* ltp-containers-tests
* ltp-controllers-tests
* ltp-cpuhotplug-tests
* ltp-crypto-tests
* ltp-cve-tests
* ltp-dio-tests
* ltp-fcntl-locktests-tests
* ltp-filecaps-tests
* ltp-fs-tests
* ltp-fs_bind-tests
* ltp-fs_perms_simple-tests
* ltp-fsx-tests
* ltp-hugetlb-tests
* ltp-io-tests
* ltp-ipc-tests
* ltp-math-tests
* ltp-mm-tests
* ltp-nptl-tests
* ltp-open-posix-tests
* ltp-pty-tests
* ltp-sched-tests
* ltp-securebits-tests
* ltp-syscalls-tests
* ltp-tracing-tests
* network-basic-tests
* packetdrill
* perf
* ssuite
* v4l2-compliance
--
Linaro LKFT
https://lkft.linaro.org