Hi,
Dependencies
============
1. Patch 2 ("pinctrl: samsung: accept GPIO bank nodes with a suffix") is
necessary for DTS patches, so would be nice to apply it before this merge
window.
2. Everything else is independent.
Best regards,
Krzysztof
Krzysztof Kozlowski (24):
pinctrl: samsung: drop pin banks references on error paths
pinctrl: samsung: accept GPIO bank nodes with a suffix
ARM: dts: exynos: drop unused pinctrl defines in Exynos3250
ARM: dts: exynos: simplify PMIC DVS pin configuration in Odroid XU
ARM: dts: exynos: override pins by label in Peach Pit
ARM: dts: exynos: simplify PMIC DVS pin configuration in Peach Pit
ARM: dts: exynos: override pins by label in Peach Pi
ARM: dts: exynos: simplify PMIC DVS pin configuration in Peach Pi
ARM: dts: s3c64xx: drop unneeded pinctrl wake-up interrupt mapping
ARM: dts: exynos: align pinctrl with dtschema in Exynos3250
ARM: dts: exynos: align pinctrl with dtschema in Exynos4210
ARM: dts: exynos: align pinctrl with dtschema in Exynos4412
ARM: dts: exynos: align pinctrl with dtschema in Exynos5250
ARM: dts: exynos: align pinctrl with dtschema in Exynos5260
ARM: dts: exynos: align pinctrl with dtschema in Exynos5410
ARM: dts: exynos: align pinctrl with dtschema in Exynos542x/5800
arm64: dts: exynos: align pinctrl with dtschema in Exynos5433
arm64: dts: exynos: align pinctrl with dtschema in Exynos7
arm64: dts: exynos: align pinctrl with dtschema in Exynos850
arm64: dts: exynos: align pinctrl with dtschema in ExynosAutov9
ARM: dts: s3c24xx: align pinctrl with dtschema
ARM: dts: s3c64xx: align pinctrl with dtschema
ARM: dts: s5pv210: align pinctrl with dtschema
dt-bindings: pinctrl: samsung: convert to dtschema
.../pinctrl/samsung,pinctrl-gpio-bank.yaml | 52 +++
.../pinctrl/samsung,pinctrl-pins-cfg.yaml | 81 ++++
.../samsung,pinctrl-wakeup-interrupt.yaml | 76 ++++
.../bindings/pinctrl/samsung,pinctrl.yaml | 381 +++++++++++++++++
.../bindings/pinctrl/samsung-pinctrl.txt | 383 ------------------
MAINTAINERS | 2 +-
arch/arm/boot/dts/exynos3250-artik5.dtsi | 10 +-
arch/arm/boot/dts/exynos3250-pinctrl.dtsi | 165 ++++----
arch/arm/boot/dts/exynos4210-i9100.dts | 30 +-
arch/arm/boot/dts/exynos4210-origen.dts | 2 +-
arch/arm/boot/dts/exynos4210-pinctrl.dtsi | 226 +++++------
arch/arm/boot/dts/exynos4210-smdkv310.dts | 4 +-
arch/arm/boot/dts/exynos4210-trats.dts | 6 +-
.../boot/dts/exynos4210-universal_c210.dts | 12 +-
arch/arm/boot/dts/exynos4412-galaxy-s3.dtsi | 4 +-
arch/arm/boot/dts/exynos4412-itop-elite.dts | 2 +-
.../boot/dts/exynos4412-itop-scp-core.dtsi | 2 +-
arch/arm/boot/dts/exynos4412-midas.dtsi | 30 +-
.../boot/dts/exynos4412-odroid-common.dtsi | 8 +-
arch/arm/boot/dts/exynos4412-odroidx.dts | 2 +-
arch/arm/boot/dts/exynos4412-origen.dts | 4 +-
arch/arm/boot/dts/exynos4412-p4note.dtsi | 44 +-
arch/arm/boot/dts/exynos4412-pinctrl.dtsi | 252 ++++++------
arch/arm/boot/dts/exynos4412-smdk4412.dts | 4 +-
arch/arm/boot/dts/exynos5250-arndale.dts | 2 +-
arch/arm/boot/dts/exynos5250-pinctrl.dtsi | 220 +++++-----
arch/arm/boot/dts/exynos5250-smdk5250.dts | 2 +-
arch/arm/boot/dts/exynos5250-snow-common.dtsi | 22 +-
arch/arm/boot/dts/exynos5250-snow-rev5.dts | 2 +-
arch/arm/boot/dts/exynos5250-snow.dts | 2 +-
arch/arm/boot/dts/exynos5250-spring.dts | 20 +-
arch/arm/boot/dts/exynos5260-pinctrl.dtsi | 148 +++----
arch/arm/boot/dts/exynos5260-xyref5260.dts | 2 +-
arch/arm/boot/dts/exynos5410-odroidxu.dts | 22 +-
arch/arm/boot/dts/exynos5410-pinctrl.dtsi | 170 ++++----
arch/arm/boot/dts/exynos5410-smdk5410.dts | 4 +-
arch/arm/boot/dts/exynos5420-arndale-octa.dts | 2 +-
arch/arm/boot/dts/exynos5420-peach-pit.dts | 89 ++--
arch/arm/boot/dts/exynos5420-pinctrl.dtsi | 194 ++++-----
arch/arm/boot/dts/exynos5420-smdk5420.dts | 6 +-
arch/arm/boot/dts/exynos5422-odroid-core.dtsi | 2 +-
.../boot/dts/exynos5422-odroidxu3-common.dtsi | 6 +-
arch/arm/boot/dts/exynos5800-peach-pi.dts | 89 ++--
arch/arm/boot/dts/s3c2416-pinctrl.dtsi | 60 +--
arch/arm/boot/dts/s3c6410-mini6410.dts | 4 +-
arch/arm/boot/dts/s3c64xx-pinctrl.dtsi | 210 +++++-----
arch/arm/boot/dts/s3c64xx.dtsi | 16 +-
arch/arm/boot/dts/s5pv210-aquila.dts | 2 +-
arch/arm/boot/dts/s5pv210-aries.dtsi | 40 +-
arch/arm/boot/dts/s5pv210-fascinate4g.dts | 12 +-
arch/arm/boot/dts/s5pv210-galaxys.dts | 16 +-
arch/arm/boot/dts/s5pv210-pinctrl.dtsi | 226 +++++------
.../boot/dts/exynos/exynos5433-pinctrl.dtsi | 211 +++++-----
.../dts/exynos/exynos5433-tm2-common.dtsi | 259 ++++++------
.../boot/dts/exynos/exynos7-espresso.dts | 6 +-
.../boot/dts/exynos/exynos7-pinctrl.dtsi | 176 ++++----
.../boot/dts/exynos/exynos850-pinctrl.dtsi | 52 +--
.../boot/dts/exynos/exynosautov9-pinctrl.dtsi | 50 +--
drivers/pinctrl/samsung/pinctrl-samsung.c | 86 +++-
59 files changed, 2212 insertions(+), 2000 deletions(-)
create mode 100644 Documentation/devicetree/bindings/pinctrl/samsung,pinctrl-gpio-bank.yaml
create mode 100644 Documentation/devicetree/bindings/pinctrl/samsung,pinctrl-pins-cfg.yaml
create mode 100644 Documentation/devicetree/bindings/pinctrl/samsung,pinctrl-wakeup-interrupt.yaml
create mode 100644 Documentation/devicetree/bindings/pinctrl/samsung,pinctrl.yaml
delete mode 100644 Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt
--
2.32.0
The PIN_OUT/PIN_OUT_SET/PIN_CFG defines for pin controller pin
configuration are not used.
Signed-off-by: Krzysztof Kozlowski <[email protected]>
---
arch/arm/boot/dts/exynos3250-pinctrl.dtsi | 25 -----------------------
1 file changed, 25 deletions(-)
diff --git a/arch/arm/boot/dts/exynos3250-pinctrl.dtsi b/arch/arm/boot/dts/exynos3250-pinctrl.dtsi
index dff3c6e3aa1f..a616cb1aca29 100644
--- a/arch/arm/boot/dts/exynos3250-pinctrl.dtsi
+++ b/arch/arm/boot/dts/exynos3250-pinctrl.dtsi
@@ -19,31 +19,6 @@ _pin { \
samsung,pin-drv = <EXYNOS4_PIN_DRV_ ##_drv>; \
}
-#define PIN_OUT(_pin, _drv) \
- _pin { \
- samsung,pins = #_pin; \
- samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; \
- samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; \
- samsung,pin-drv = <EXYNOS4_PIN_DRV_ ##_drv>; \
- }
-
-#define PIN_OUT_SET(_pin, _val, _drv) \
- _pin { \
- samsung,pins = #_pin; \
- samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; \
- samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; \
- samsung,pin-drv = <EXYNOS4_PIN_DRV_ ##_drv>; \
- samsung,pin-val = <_val>; \
- }
-
-#define PIN_CFG(_pin, _sel, _pull, _drv) \
- _pin { \
- samsung,pins = #_pin; \
- samsung,pin-function = <_sel>; \
- samsung,pin-pud = <EXYNOS_PIN_PULL_ ##_pull>; \
- samsung,pin-drv = <EXYNOS4_PIN_DRV_ ##_drv>; \
- }
-
#define PIN_SLP(_pin, _mode, _pull) \
_pin { \
samsung,pins = #_pin; \
--
2.32.0
Existing dt-bindings expected that each GPIO/pin bank within pin
controller has its own node with name matching the bank (e.g. gpa0,
gpx2) and "gpio-controller" property. The node name is then used for
matching between driver data and DTS.
Newly introduced dtschema expects to have nodes ending with "-gpio-bank"
suffix, so rewrite bank-devicetree matching to look for old and new
style of naming.
Signed-off-by: Krzysztof Kozlowski <[email protected]>
---
drivers/pinctrl/samsung/pinctrl-samsung.c | 57 ++++++++++++++++++-----
1 file changed, 45 insertions(+), 12 deletions(-)
diff --git a/drivers/pinctrl/samsung/pinctrl-samsung.c b/drivers/pinctrl/samsung/pinctrl-samsung.c
index f2864a7869b3..561853df8ef7 100644
--- a/drivers/pinctrl/samsung/pinctrl-samsung.c
+++ b/drivers/pinctrl/samsung/pinctrl-samsung.c
@@ -1011,13 +1011,56 @@ static void samsung_banks_of_node_put(struct samsung_pinctrl_drv_data *d)
of_node_put(bank->of_node);
}
+/*
+ * Iterate over all driver pin banks to find one matching the name of node,
+ * skipping optional "-gpio" node suffix. When found, assign node to the bank.
+ */
+static void samsung_banks_of_node_get(struct device *dev,
+ struct samsung_pinctrl_drv_data *d,
+ struct device_node *node)
+{
+ const char *suffix = "-gpio-bank";
+ struct samsung_pin_bank *bank;
+ struct device_node *child;
+ /* Pin bank names are up to 4 characters */
+ char node_name[20];
+ unsigned int i;
+ size_t len;
+
+ bank = d->pin_banks;
+ for (i = 0; i < d->nr_banks; ++i, ++bank) {
+ strscpy(node_name, bank->name, sizeof(node_name));
+ len = strlcat(node_name, suffix, sizeof(node_name));
+ if (len == sizeof(sizeof(node_name))) {
+ dev_err(dev, "Too long pin bank name '%s', ignoring\n",
+ bank->name);
+ continue;
+ }
+
+ for_each_child_of_node(node, child) {
+ if (!of_find_property(child, "gpio-controller", NULL))
+ continue;
+ if (of_node_name_eq(child, node_name))
+ break;
+ else if (of_node_name_eq(child, bank->name))
+ break;
+ }
+
+ if (child)
+ bank->of_node = child;
+ else
+ dev_warn(dev, "Missing node for bank %s - invalid DTB\n",
+ bank->name);
+ /* child reference dropped in samsung_drop_banks_of_node() */
+ }
+}
+
/* retrieve the soc specific data */
static const struct samsung_pin_ctrl *
samsung_pinctrl_get_soc_data(struct samsung_pinctrl_drv_data *d,
struct platform_device *pdev)
{
struct device_node *node = pdev->dev.of_node;
- struct device_node *np;
const struct samsung_pin_bank_data *bdata;
const struct samsung_pin_ctrl *ctrl;
struct samsung_pin_bank *bank;
@@ -1081,17 +1124,7 @@ samsung_pinctrl_get_soc_data(struct samsung_pinctrl_drv_data *d,
*/
d->virt_base = virt_base[0];
- for_each_child_of_node(node, np) {
- if (!of_find_property(np, "gpio-controller", NULL))
- continue;
- bank = d->pin_banks;
- for (i = 0; i < d->nr_banks; ++i, ++bank) {
- if (of_node_name_eq(np, bank->name)) {
- bank->of_node = np;
- break;
- }
- }
- }
+ samsung_banks_of_node_get(&pdev->dev, d, node);
d->pin_base = pin_base;
pin_base += d->nr_pins;
--
2.32.0
The pin configuration for PMIC DVS (pmic-dvs-2 and pmic-dvs-3) are
exactly the same, so merge them.
Signed-off-by: Krzysztof Kozlowski <[email protected]>
---
arch/arm/boot/dts/exynos5410-odroidxu.dts | 12 ++----------
1 file changed, 2 insertions(+), 10 deletions(-)
diff --git a/arch/arm/boot/dts/exynos5410-odroidxu.dts b/arch/arm/boot/dts/exynos5410-odroidxu.dts
index 884fef55836c..9f2200dd5b43 100644
--- a/arch/arm/boot/dts/exynos5410-odroidxu.dts
+++ b/arch/arm/boot/dts/exynos5410-odroidxu.dts
@@ -188,8 +188,7 @@ max77802: pmic@9 {
interrupt-parent = <&gpx0>;
interrupts = <4 IRQ_TYPE_NONE>;
pinctrl-names = "default";
- pinctrl-0 = <&max77802_irq>, <&pmic_dvs_1>, <&pmic_dvs_2>,
- <&pmic_dvs_3>;
+ pinctrl-0 = <&max77802_irq>, <&pmic_dvs_1>, <&pmic_dvs_2>;
wakeup-source;
#clock-cells = <1>;
@@ -563,15 +562,8 @@ sd2_wp: sd2-wp {
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
};
- pmic_dvs_3: pmic-dvs-3 {
- samsung,pins = "gpx0-0";
- samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
- samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
- samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
- };
-
pmic_dvs_2: pmic-dvs-2 {
- samsung,pins = "gpx0-1";
+ samsung,pins = "gpx0-0", "gpx0-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
--
2.32.0
The driver iterates over its devicetree children with
for_each_child_of_node() and stores for later found node pointer. This
has to be put in error paths to avoid leak during re-probing.
Fixes: ab663789d697 ("pinctrl: samsung: Match pin banks with their device nodes")
Cc: <[email protected]>
Signed-off-by: Krzysztof Kozlowski <[email protected]>
---
drivers/pinctrl/samsung/pinctrl-samsung.c | 29 +++++++++++++++++------
1 file changed, 22 insertions(+), 7 deletions(-)
diff --git a/drivers/pinctrl/samsung/pinctrl-samsung.c b/drivers/pinctrl/samsung/pinctrl-samsung.c
index 8941f658e7f1..f2864a7869b3 100644
--- a/drivers/pinctrl/samsung/pinctrl-samsung.c
+++ b/drivers/pinctrl/samsung/pinctrl-samsung.c
@@ -1002,6 +1002,15 @@ samsung_pinctrl_get_soc_data_for_of_alias(struct platform_device *pdev)
return &(of_data->ctrl[id]);
}
+static void samsung_banks_of_node_put(struct samsung_pinctrl_drv_data *d)
+{
+ struct samsung_pin_bank *bank;
+ unsigned int i;
+
+ for (i = 0; i < d->nr_banks; ++i, ++bank)
+ of_node_put(bank->of_node);
+}
+
/* retrieve the soc specific data */
static const struct samsung_pin_ctrl *
samsung_pinctrl_get_soc_data(struct samsung_pinctrl_drv_data *d,
@@ -1116,19 +1125,19 @@ static int samsung_pinctrl_probe(struct platform_device *pdev)
if (ctrl->retention_data) {
drvdata->retention_ctrl = ctrl->retention_data->init(drvdata,
ctrl->retention_data);
- if (IS_ERR(drvdata->retention_ctrl))
- return PTR_ERR(drvdata->retention_ctrl);
+ if (IS_ERR(drvdata->retention_ctrl)) {
+ ret = PTR_ERR(drvdata->retention_ctrl);
+ goto err_put_banks;
+ }
}
ret = samsung_pinctrl_register(pdev, drvdata);
if (ret)
- return ret;
+ goto err_put_banks;
ret = samsung_gpiolib_register(pdev, drvdata);
- if (ret) {
- samsung_pinctrl_unregister(pdev, drvdata);
- return ret;
- }
+ if (ret)
+ goto err_unregister;
if (ctrl->eint_gpio_init)
ctrl->eint_gpio_init(drvdata);
@@ -1138,6 +1147,12 @@ static int samsung_pinctrl_probe(struct platform_device *pdev)
platform_set_drvdata(pdev, drvdata);
return 0;
+
+err_unregister:
+ samsung_pinctrl_unregister(pdev, drvdata);
+err_put_banks:
+ samsung_banks_of_node_put(drvdata);
+ return ret;
}
/*
--
2.32.0
Using node paths to extend or override a device tree node is error
prone. If there was a typo error, a new node will be created instead of
extending the existing node. This will lead to run-time errors that
could be hard to detect.
A mistyped label on the other hand, will cause a dtc compile error
(during build time).
Signed-off-by: Krzysztof Kozlowski <[email protected]>
---
arch/arm/boot/dts/exynos5420-peach-pit.dts | 44 +++++++++++-----------
1 file changed, 22 insertions(+), 22 deletions(-)
diff --git a/arch/arm/boot/dts/exynos5420-peach-pit.dts b/arch/arm/boot/dts/exynos5420-peach-pit.dts
index e76fb104db19..1ae5528e9ebf 100644
--- a/arch/arm/boot/dts/exynos5420-peach-pit.dts
+++ b/arch/arm/boot/dts/exynos5420-peach-pit.dts
@@ -868,27 +868,26 @@ pmic_dvs_1: pmic-dvs-1 {
};
};
-&pinctrl_1 {
- /* Adjust WiFi drive strengths lower for EMI */
- sd1_clk: sd1-clk {
- samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
- };
+/* pinctrl_1 */
+/* Adjust WiFi drive strengths lower for EMI */
+&sd1_bus1 {
+ samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
+};
- sd1_cmd: sd1-cmd {
- samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
- };
+&sd1_bus4 {
+ samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
+};
- sd1_bus1: sd1-bus-width1 {
- samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
- };
+&sd1_bus8 {
+ samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
+};
- sd1_bus4: sd1-bus-width4 {
- samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
- };
+&sd1_clk {
+ samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
+};
- sd1_bus8: sd1-bus-width8 {
- samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
- };
+&sd1_cmd {
+ samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
};
&pinctrl_2 {
@@ -907,12 +906,13 @@ pmic_dvs_3: pmic-dvs-3 {
};
};
-&pinctrl_3 {
- /* Drive SPI lines at x2 for better integrity */
- spi2-bus {
- samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
- };
+/* pinctrl_3*/
+/* Drive SPI lines at x2 for better integrity */
+&spi2_bus {
+ samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
+};
+&pinctrl_3 {
/* Drive SPI chip select at x2 for better integrity */
ec_spi_cs: ec-spi-cs {
samsung,pins = "gpb1-2";
--
2.32.0
The pin configuration for PMIC DVS (pmic-dvs-2 and pmic-dvs-3) are
exactly the same, so merge them.
Signed-off-by: Krzysztof Kozlowski <[email protected]>
---
arch/arm/boot/dts/exynos5420-peach-pit.dts | 11 ++---------
1 file changed, 2 insertions(+), 9 deletions(-)
diff --git a/arch/arm/boot/dts/exynos5420-peach-pit.dts b/arch/arm/boot/dts/exynos5420-peach-pit.dts
index 1ae5528e9ebf..e8819659081a 100644
--- a/arch/arm/boot/dts/exynos5420-peach-pit.dts
+++ b/arch/arm/boot/dts/exynos5420-peach-pit.dts
@@ -212,7 +212,7 @@ max77802: pmic@9 {
interrupts = <1 IRQ_TYPE_NONE>;
pinctrl-names = "default";
pinctrl-0 = <&max77802_irq>, <&pmic_selb>,
- <&pmic_dvs_1>, <&pmic_dvs_2>, <&pmic_dvs_3>;
+ <&pmic_dvs_1>, <&pmic_dvs_2>;
wakeup-source;
reg = <0x9>;
#clock-cells = <1>;
@@ -892,14 +892,7 @@ &sd1_cmd {
&pinctrl_2 {
pmic_dvs_2: pmic-dvs-2 {
- samsung,pins = "gpj4-2";
- samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
- samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
- samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
- };
-
- pmic_dvs_3: pmic-dvs-3 {
- samsung,pins = "gpj4-3";
+ samsung,pins = "gpj4-2", "gpj4-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
--
2.32.0
Using node paths to extend or override a device tree node is error
prone. If there was a typo error, a new node will be created instead of
extending the existing node. This will lead to run-time errors that
could be hard to detect.
A mistyped label on the other hand, will cause a dtc compile error
(during build time).
Signed-off-by: Krzysztof Kozlowski <[email protected]>
---
arch/arm/boot/dts/exynos5800-peach-pi.dts | 33 +++++++++++------------
1 file changed, 16 insertions(+), 17 deletions(-)
diff --git a/arch/arm/boot/dts/exynos5800-peach-pi.dts b/arch/arm/boot/dts/exynos5800-peach-pi.dts
index 77013ee586f8..6bf3fd37fb2b 100644
--- a/arch/arm/boot/dts/exynos5800-peach-pi.dts
+++ b/arch/arm/boot/dts/exynos5800-peach-pi.dts
@@ -850,27 +850,26 @@ pmic_dvs_1: pmic-dvs-1 {
};
};
-&pinctrl_1 {
- /* Adjust WiFi drive strengths lower for EMI */
- sd1_clk: sd1-clk {
- samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
- };
+/* pinctrl_1 */
+/* Adjust WiFi drive strengths lower for EMI */
+&sd1_bus1 {
+ samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
+};
- sd1_cmd: sd1-cmd {
- samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
- };
+&sd1_bus4 {
+ samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
+};
- sd1_bus1: sd1-bus-width1 {
- samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
- };
+&sd1_bus8 {
+ samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
+};
- sd1_bus4: sd1-bus-width4 {
- samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
- };
+&sd1_clk {
+ samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
+};
- sd1_bus8: sd1-bus-width8 {
- samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
- };
+&sd1_cmd {
+ samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
};
&pinctrl_2 {
--
2.32.0
The pin configuration for PMIC DVS (pmic-dvs-2 and pmic-dvs-3) are
exactly the same, so merge them.
Signed-off-by: Krzysztof Kozlowski <[email protected]>
---
arch/arm/boot/dts/exynos5800-peach-pi.dts | 20 +++++++-------------
1 file changed, 7 insertions(+), 13 deletions(-)
diff --git a/arch/arm/boot/dts/exynos5800-peach-pi.dts b/arch/arm/boot/dts/exynos5800-peach-pi.dts
index 6bf3fd37fb2b..eca805b83816 100644
--- a/arch/arm/boot/dts/exynos5800-peach-pi.dts
+++ b/arch/arm/boot/dts/exynos5800-peach-pi.dts
@@ -221,7 +221,7 @@ max77802: pmic@9 {
interrupts = <1 IRQ_TYPE_NONE>;
pinctrl-names = "default";
pinctrl-0 = <&max77802_irq>, <&pmic_selb>,
- <&pmic_dvs_1>, <&pmic_dvs_2>, <&pmic_dvs_3>;
+ <&pmic_dvs_1>, <&pmic_dvs_2>;
wakeup-source;
reg = <0x9>;
#clock-cells = <1>;
@@ -874,26 +874,20 @@ &sd1_cmd {
&pinctrl_2 {
pmic_dvs_2: pmic-dvs-2 {
- samsung,pins = "gpj4-2";
+ samsung,pins = "gpj4-2", "gpj4-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
};
+};
- pmic_dvs_3: pmic-dvs-3 {
- samsung,pins = "gpj4-3";
- samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
- samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
- samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
- };
+/* pinctrl_3*/
+/* Drive SPI lines at x2 for better integrity */
+&spi2_bus {
+ samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
};
&pinctrl_3 {
- /* Drive SPI lines at x2 for better integrity */
- spi2-bus {
- samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
- };
-
/* Drive SPI chip select at x2 for better integrity */
ec_spi_cs: ec-spi-cs {
samsung,pins = "gpb1-2";
--
2.32.0
Simplify the nodes of S3C64xx pin controller with wake-up interrupts by
removing the artificial pinctrl-interrupt-map mapping node and use
interrupts-extended.
Signed-off-by: Krzysztof Kozlowski <[email protected]>
---
arch/arm/boot/dts/s3c64xx.dtsi | 16 ++++------------
1 file changed, 4 insertions(+), 12 deletions(-)
diff --git a/arch/arm/boot/dts/s3c64xx.dtsi b/arch/arm/boot/dts/s3c64xx.dtsi
index cb11a87dbc42..67a7a66e11d5 100644
--- a/arch/arm/boot/dts/s3c64xx.dtsi
+++ b/arch/arm/boot/dts/s3c64xx.dtsi
@@ -178,20 +178,12 @@ pinctrl0: pinctrl@7f008000 {
interrupt-parent = <&vic1>;
interrupts = <21>;
- pctrl_int_map: pinctrl-interrupt-map {
- interrupt-map = <0 &vic0 0>,
- <1 &vic0 1>,
- <2 &vic1 0>,
- <3 &vic1 1>;
- #address-cells = <0>;
- #size-cells = <0>;
- #interrupt-cells = <1>;
- };
-
wakeup-interrupt-controller {
compatible = "samsung,s3c64xx-wakeup-eint";
- interrupts = <0>, <1>, <2>, <3>;
- interrupt-parent = <&pctrl_int_map>;
+ interrupts-extended = <&vic0 0>,
+ <&vic0 1>,
+ <&vic1 0>,
+ <&vic1 1>;
};
};
};
--
2.32.0
Align the pin controller related nodes with dtschema. No functional
change expected.
Signed-off-by: Krzysztof Kozlowski <[email protected]>
---
arch/arm/boot/dts/exynos4210-i9100.dts | 30 +--
arch/arm/boot/dts/exynos4210-origen.dts | 2 +-
arch/arm/boot/dts/exynos4210-pinctrl.dtsi | 226 +++++++++---------
arch/arm/boot/dts/exynos4210-smdkv310.dts | 4 +-
arch/arm/boot/dts/exynos4210-trats.dts | 6 +-
.../boot/dts/exynos4210-universal_c210.dts | 12 +-
6 files changed, 140 insertions(+), 140 deletions(-)
diff --git a/arch/arm/boot/dts/exynos4210-i9100.dts b/arch/arm/boot/dts/exynos4210-i9100.dts
index 33894054b8b0..3c0a18b30837 100644
--- a/arch/arm/boot/dts/exynos4210-i9100.dts
+++ b/arch/arm/boot/dts/exynos4210-i9100.dts
@@ -672,26 +672,26 @@ &pinctrl_0 {
pinctrl-names = "default";
pinctrl-0 = <&sleep0>;
- sleep0: sleep-states {
- gpa0-0 {
+ sleep0: sleep-state {
+ gpa0-0-pin {
samsung,pins = "gpa0-0";
samsung,pin-con-pdn = <EXYNOS_PIN_PDN_INPUT>;
samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_NONE>;
};
- gpa0-1 {
+ gpa0-1-pin {
samsung,pins = "gpa0-1";
samsung,pin-con-pdn = <EXYNOS_PIN_PDN_OUT0>;
samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_NONE>;
};
- gpa0-2 {
+ gpa0-2-pin {
samsung,pins = "gpa0-2";
samsung,pin-con-pdn = <EXYNOS_PIN_PDN_INPUT>;
samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_NONE>;
};
- gpa0-3 {
+ gpa0-3-pin {
samsung,pins = "gpa0-3";
samsung,pin-con-pdn = <EXYNOS_PIN_PDN_OUT1>;
samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_NONE>;
@@ -700,19 +700,19 @@ gpa0-3 {
};
&pinctrl_1 {
- mhl_int: mhl-int {
+ mhl_int: mhl-int-pins {
samsung,pins = "gpf3-5";
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
};
- i2c_mhl_bus: i2c-mhl-bus {
+ i2c_mhl_bus: i2c-mhl-bus-pins {
samsung,pins = "gpf0-4", "gpf0-6";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- usb_sel: usb-sel {
+ usb_sel: usb-sel-pins {
samsung,pins = "gpl0-6";
samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
@@ -720,7 +720,7 @@ usb_sel: usb-sel {
samsung,pin-val = <0>;
};
- bt_en: bt-en {
+ bt_en: bt-en-pins {
samsung,pins = "gpl0-4";
samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
@@ -728,7 +728,7 @@ bt_en: bt-en {
samsung,pin-val = <0>;
};
- bt_res: bt-res {
+ bt_res: bt-res-pins {
samsung,pins = "gpl1-0";
samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
@@ -736,7 +736,7 @@ bt_res: bt-res {
samsung,pin-val = <0>;
};
- otg_gp: otg-gp {
+ otg_gp: otg-gp-pins {
samsung,pins = "gpx3-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
@@ -744,23 +744,23 @@ otg_gp: otg-gp {
samsung,pin-val = <0>;
};
- mag_mhl_gpio: mag-mhl {
+ mag_mhl_gpio: mag-mhl-pins {
samsung,pins = "gpd0-2";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
};
- max8997_irq: max8997-irq {
+ max8997_irq: max8997-irq-pins {
samsung,pins = "gpx0-7";
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
};
- max17042_fuel_irq: max17042-fuel-irq {
+ max17042_fuel_irq: max17042-fuel-irq-pins {
samsung,pins = "gpx2-3";
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
};
- tsp224_irq: tsp224-irq {
+ tsp224_irq: tsp224-irq-pins {
samsung,pins = "gpx0-4";
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
};
diff --git a/arch/arm/boot/dts/exynos4210-origen.dts b/arch/arm/boot/dts/exynos4210-origen.dts
index 435fda60e86d..a08ce2f37ea2 100644
--- a/arch/arm/boot/dts/exynos4210-origen.dts
+++ b/arch/arm/boot/dts/exynos4210-origen.dts
@@ -316,7 +316,7 @@ EN32KHZ_AP {
};
&pinctrl_1 {
- max8997_irq: max8997-irq {
+ max8997_irq: max8997-irq-pins {
samsung,pins = "gpx0-3", "gpx0-4";
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
};
diff --git a/arch/arm/boot/dts/exynos4210-pinctrl.dtsi b/arch/arm/boot/dts/exynos4210-pinctrl.dtsi
index 520c5934a8d4..6373009bb727 100644
--- a/arch/arm/boot/dts/exynos4210-pinctrl.dtsi
+++ b/arch/arm/boot/dts/exynos4210-pinctrl.dtsi
@@ -14,7 +14,7 @@
#include <dt-bindings/pinctrl/samsung.h>
&pinctrl_0 {
- gpa0: gpa0 {
+ gpa0: gpa0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -22,7 +22,7 @@ gpa0: gpa0 {
#interrupt-cells = <2>;
};
- gpa1: gpa1 {
+ gpa1: gpa1-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -30,7 +30,7 @@ gpa1: gpa1 {
#interrupt-cells = <2>;
};
- gpb: gpb {
+ gpb: gpb-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -38,7 +38,7 @@ gpb: gpb {
#interrupt-cells = <2>;
};
- gpc0: gpc0 {
+ gpc0: gpc0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -46,7 +46,7 @@ gpc0: gpc0 {
#interrupt-cells = <2>;
};
- gpc1: gpc1 {
+ gpc1: gpc1-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -54,7 +54,7 @@ gpc1: gpc1 {
#interrupt-cells = <2>;
};
- gpd0: gpd0 {
+ gpd0: gpd0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -62,7 +62,7 @@ gpd0: gpd0 {
#interrupt-cells = <2>;
};
- gpd1: gpd1 {
+ gpd1: gpd1-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -70,7 +70,7 @@ gpd1: gpd1 {
#interrupt-cells = <2>;
};
- gpe0: gpe0 {
+ gpe0: gpe0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -78,7 +78,7 @@ gpe0: gpe0 {
#interrupt-cells = <2>;
};
- gpe1: gpe1 {
+ gpe1: gpe1-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -86,7 +86,7 @@ gpe1: gpe1 {
#interrupt-cells = <2>;
};
- gpe2: gpe2 {
+ gpe2: gpe2-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -94,7 +94,7 @@ gpe2: gpe2 {
#interrupt-cells = <2>;
};
- gpe3: gpe3 {
+ gpe3: gpe3-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -102,7 +102,7 @@ gpe3: gpe3 {
#interrupt-cells = <2>;
};
- gpe4: gpe4 {
+ gpe4: gpe4-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -110,7 +110,7 @@ gpe4: gpe4 {
#interrupt-cells = <2>;
};
- gpf0: gpf0 {
+ gpf0: gpf0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -118,7 +118,7 @@ gpf0: gpf0 {
#interrupt-cells = <2>;
};
- gpf1: gpf1 {
+ gpf1: gpf1-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -126,7 +126,7 @@ gpf1: gpf1 {
#interrupt-cells = <2>;
};
- gpf2: gpf2 {
+ gpf2: gpf2-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -134,7 +134,7 @@ gpf2: gpf2 {
#interrupt-cells = <2>;
};
- gpf3: gpf3 {
+ gpf3: gpf3-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -142,112 +142,112 @@ gpf3: gpf3 {
#interrupt-cells = <2>;
};
- uart0_data: uart0-data {
+ uart0_data: uart0-data-pins {
samsung,pins = "gpa0-0", "gpa0-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- uart0_fctl: uart0-fctl {
+ uart0_fctl: uart0-fctl-pins {
samsung,pins = "gpa0-2", "gpa0-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- uart1_data: uart1-data {
+ uart1_data: uart1-data-pins {
samsung,pins = "gpa0-4", "gpa0-5";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- uart1_fctl: uart1-fctl {
+ uart1_fctl: uart1-fctl-pins {
samsung,pins = "gpa0-6", "gpa0-7";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- i2c2_bus: i2c2-bus {
+ i2c2_bus: i2c2-bus-pins {
samsung,pins = "gpa0-6", "gpa0-7";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- uart2_data: uart2-data {
+ uart2_data: uart2-data-pins {
samsung,pins = "gpa1-0", "gpa1-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- uart2_fctl: uart2-fctl {
+ uart2_fctl: uart2-fctl-pins {
samsung,pins = "gpa1-2", "gpa1-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- uart_audio_a: uart-audio-a {
+ uart_audio_a: uart-audio-a-pins {
samsung,pins = "gpa1-0", "gpa1-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- i2c3_bus: i2c3-bus {
+ i2c3_bus: i2c3-bus-pins {
samsung,pins = "gpa1-2", "gpa1-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- uart3_data: uart3-data {
+ uart3_data: uart3-data-pins {
samsung,pins = "gpa1-4", "gpa1-5";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- uart_audio_b: uart-audio-b {
+ uart_audio_b: uart-audio-b-pins {
samsung,pins = "gpa1-4", "gpa1-5";
samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- spi0_bus: spi0-bus {
+ spi0_bus: spi0-bus-pins {
samsung,pins = "gpb-0", "gpb-2", "gpb-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- i2c4_bus: i2c4-bus {
+ i2c4_bus: i2c4-bus-pins {
samsung,pins = "gpb-2", "gpb-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- spi1_bus: spi1-bus {
+ spi1_bus: spi1-bus-pins {
samsung,pins = "gpb-4", "gpb-6", "gpb-7";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- i2c5_bus: i2c5-bus {
+ i2c5_bus: i2c5-bus-pins {
samsung,pins = "gpb-6", "gpb-7";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- i2s1_bus: i2s1-bus {
+ i2s1_bus: i2s1-bus-pins {
samsung,pins = "gpc0-0", "gpc0-1", "gpc0-2", "gpc0-3",
"gpc0-4";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
@@ -255,7 +255,7 @@ i2s1_bus: i2s1-bus {
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- pcm1_bus: pcm1-bus {
+ pcm1_bus: pcm1-bus-pins {
samsung,pins = "gpc0-0", "gpc0-1", "gpc0-2", "gpc0-3",
"gpc0-4";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
@@ -263,7 +263,7 @@ pcm1_bus: pcm1-bus {
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- ac97_bus: ac97-bus {
+ ac97_bus: ac97-bus-pins {
samsung,pins = "gpc0-0", "gpc0-1", "gpc0-2", "gpc0-3",
"gpc0-4";
samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
@@ -271,7 +271,7 @@ ac97_bus: ac97-bus {
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- i2s2_bus: i2s2-bus {
+ i2s2_bus: i2s2-bus-pins {
samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3",
"gpc1-4";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
@@ -279,7 +279,7 @@ i2s2_bus: i2s2-bus {
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- pcm2_bus: pcm2-bus {
+ pcm2_bus: pcm2-bus-pins {
samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3",
"gpc1-4";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
@@ -287,105 +287,105 @@ pcm2_bus: pcm2-bus {
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- spdif_bus: spdif-bus {
+ spdif_bus: spdif-bus-pins {
samsung,pins = "gpc1-0", "gpc1-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- i2c6_bus: i2c6-bus {
+ i2c6_bus: i2c6-bus-pins {
samsung,pins = "gpc1-3", "gpc1-4";
samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- spi2_bus: spi2-bus {
+ spi2_bus: spi2-bus-pins {
samsung,pins = "gpc1-1", "gpc1-2", "gpc1-3", "gpc1-4";
samsung,pin-function = <EXYNOS_PIN_FUNC_5>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- i2c7_bus: i2c7-bus {
+ i2c7_bus: i2c7-bus-pins {
samsung,pins = "gpd0-2", "gpd0-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- i2c0_bus: i2c0-bus {
+ i2c0_bus: i2c0-bus-pins {
samsung,pins = "gpd1-0", "gpd1-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- i2c1_bus: i2c1-bus {
+ i2c1_bus: i2c1-bus-pins {
samsung,pins = "gpd1-2", "gpd1-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- pwm0_out: pwm0-out {
+ pwm0_out: pwm0-out-pins {
samsung,pins = "gpd0-0";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- pwm1_out: pwm1-out {
+ pwm1_out: pwm1-out-pins {
samsung,pins = "gpd0-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- pwm2_out: pwm2-out {
+ pwm2_out: pwm2-out-pins {
samsung,pins = "gpd0-2";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- pwm3_out: pwm3-out {
+ pwm3_out: pwm3-out-pins {
samsung,pins = "gpd0-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- lcd_ctrl: lcd-ctrl {
+ lcd_ctrl: lcd-ctrl-pins {
samsung,pins = "gpd0-0", "gpd0-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- lcd_sync: lcd-sync {
+ lcd_sync: lcd-sync-pins {
samsung,pins = "gpf0-0", "gpf0-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- lcd_en: lcd-en {
+ lcd_en: lcd-en-pins {
samsung,pins = "gpe3-4";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- lcd_clk: lcd-clk {
+ lcd_clk: lcd-clk-pins {
samsung,pins = "gpf0-0", "gpf0-1", "gpf0-2", "gpf0-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- lcd_data16: lcd-data-width16 {
+ lcd_data16: lcd-data-width16-pins {
samsung,pins = "gpf0-7", "gpf1-0", "gpf1-1", "gpf1-2",
"gpf1-3", "gpf1-6", "gpf1-7", "gpf2-0",
"gpf2-1", "gpf2-2", "gpf2-3", "gpf2-7",
@@ -395,7 +395,7 @@ lcd_data16: lcd-data-width16 {
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- lcd_data18: lcd-data-width18 {
+ lcd_data18: lcd-data-width18-pins {
samsung,pins = "gpf0-6", "gpf0-7", "gpf1-0", "gpf1-1",
"gpf1-2", "gpf1-3", "gpf1-6", "gpf1-7",
"gpf2-0", "gpf2-1", "gpf2-2", "gpf2-3",
@@ -406,7 +406,7 @@ lcd_data18: lcd-data-width18 {
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- lcd_data24: lcd-data-width24 {
+ lcd_data24: lcd-data-width24-pins {
samsung,pins = "gpf0-4", "gpf0-5", "gpf0-6", "gpf0-7",
"gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3",
"gpf1-4", "gpf1-5", "gpf1-6", "gpf1-7",
@@ -420,7 +420,7 @@ lcd_data24: lcd-data-width24 {
};
&pinctrl_1 {
- gpj0: gpj0 {
+ gpj0: gpj0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -428,7 +428,7 @@ gpj0: gpj0 {
#interrupt-cells = <2>;
};
- gpj1: gpj1 {
+ gpj1: gpj1-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -436,7 +436,7 @@ gpj1: gpj1 {
#interrupt-cells = <2>;
};
- gpk0: gpk0 {
+ gpk0: gpk0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -444,7 +444,7 @@ gpk0: gpk0 {
#interrupt-cells = <2>;
};
- gpk1: gpk1 {
+ gpk1: gpk1-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -452,7 +452,7 @@ gpk1: gpk1 {
#interrupt-cells = <2>;
};
- gpk2: gpk2 {
+ gpk2: gpk2-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -460,7 +460,7 @@ gpk2: gpk2 {
#interrupt-cells = <2>;
};
- gpk3: gpk3 {
+ gpk3: gpk3-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -468,7 +468,7 @@ gpk3: gpk3 {
#interrupt-cells = <2>;
};
- gpl0: gpl0 {
+ gpl0: gpl0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -476,7 +476,7 @@ gpl0: gpl0 {
#interrupt-cells = <2>;
};
- gpl1: gpl1 {
+ gpl1: gpl1-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -484,7 +484,7 @@ gpl1: gpl1 {
#interrupt-cells = <2>;
};
- gpl2: gpl2 {
+ gpl2: gpl2-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -492,42 +492,42 @@ gpl2: gpl2 {
#interrupt-cells = <2>;
};
- gpy0: gpy0 {
+ gpy0: gpy0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
};
- gpy1: gpy1 {
+ gpy1: gpy1-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
};
- gpy2: gpy2 {
+ gpy2: gpy2-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
};
- gpy3: gpy3 {
+ gpy3: gpy3-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
};
- gpy4: gpy4 {
+ gpy4: gpy4-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
};
- gpy5: gpy5 {
+ gpy5: gpy5-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
};
- gpy6: gpy6 {
+ gpy6: gpy6-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
};
- gpx0: gpx0 {
+ gpx0: gpx0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -544,7 +544,7 @@ gpx0: gpx0 {
#interrupt-cells = <2>;
};
- gpx1: gpx1 {
+ gpx1: gpx1-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -561,7 +561,7 @@ gpx1: gpx1 {
#interrupt-cells = <2>;
};
- gpx2: gpx2 {
+ gpx2: gpx2-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -569,7 +569,7 @@ gpx2: gpx2 {
#interrupt-cells = <2>;
};
- gpx3: gpx3 {
+ gpx3: gpx3-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -577,238 +577,238 @@ gpx3: gpx3 {
#interrupt-cells = <2>;
};
- sd0_clk: sd0-clk {
+ sd0_clk: sd0-clk-pins {
samsung,pins = "gpk0-0";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
- sd0_cmd: sd0-cmd {
+ sd0_cmd: sd0-cmd-pins {
samsung,pins = "gpk0-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
- sd0_cd: sd0-cd {
+ sd0_cd: sd0-cd-pins {
samsung,pins = "gpk0-2";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
- sd0_bus1: sd0-bus-width1 {
+ sd0_bus1: sd0-bus-width1-pins {
samsung,pins = "gpk0-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
- sd0_bus4: sd0-bus-width4 {
+ sd0_bus4: sd0-bus-width4-pins {
samsung,pins = "gpk0-3", "gpk0-4", "gpk0-5", "gpk0-6";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
- sd0_bus8: sd0-bus-width8 {
+ sd0_bus8: sd0-bus-width8-pins {
samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
- sd4_clk: sd4-clk {
+ sd4_clk: sd4-clk-pins {
samsung,pins = "gpk0-0";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
- sd4_cmd: sd4-cmd {
+ sd4_cmd: sd4-cmd-pins {
samsung,pins = "gpk0-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
- sd4_cd: sd4-cd {
+ sd4_cd: sd4-cd-pins {
samsung,pins = "gpk0-2";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
- sd4_bus1: sd4-bus-width1 {
+ sd4_bus1: sd4-bus-width1-pins {
samsung,pins = "gpk0-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
- sd4_bus4: sd4-bus-width4 {
+ sd4_bus4: sd4-bus-width4-pins {
samsung,pins = "gpk0-3", "gpk0-4", "gpk0-5", "gpk0-6";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
- sd4_bus8: sd4-bus-width8 {
+ sd4_bus8: sd4-bus-width8-pins {
samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
- sd1_clk: sd1-clk {
+ sd1_clk: sd1-clk-pins {
samsung,pins = "gpk1-0";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
- sd1_cmd: sd1-cmd {
+ sd1_cmd: sd1-cmd-pins {
samsung,pins = "gpk1-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
- sd1_cd: sd1-cd {
+ sd1_cd: sd1-cd-pins {
samsung,pins = "gpk1-2";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
- sd1_bus1: sd1-bus-width1 {
+ sd1_bus1: sd1-bus-width1-pins {
samsung,pins = "gpk1-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
- sd1_bus4: sd1-bus-width4 {
+ sd1_bus4: sd1-bus-width4-pins {
samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
- sd2_clk: sd2-clk {
+ sd2_clk: sd2-clk-pins {
samsung,pins = "gpk2-0";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
- sd2_cmd: sd2-cmd {
+ sd2_cmd: sd2-cmd-pins {
samsung,pins = "gpk2-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
- sd2_cd: sd2-cd {
+ sd2_cd: sd2-cd-pins {
samsung,pins = "gpk2-2";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
- sd2_bus1: sd2-bus-width1 {
+ sd2_bus1: sd2-bus-width1-pins {
samsung,pins = "gpk2-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
- sd2_bus4: sd2-bus-width4 {
+ sd2_bus4: sd2-bus-width4-pins {
samsung,pins = "gpk2-3", "gpk2-4", "gpk2-5", "gpk2-6";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
- sd2_bus8: sd2-bus-width8 {
+ sd2_bus8: sd2-bus-width8-pins {
samsung,pins = "gpk3-3", "gpk3-4", "gpk3-5", "gpk3-6";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
- sd3_clk: sd3-clk {
+ sd3_clk: sd3-clk-pins {
samsung,pins = "gpk3-0";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
- sd3_cmd: sd3-cmd {
+ sd3_cmd: sd3-cmd-pins {
samsung,pins = "gpk3-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
- sd3_cd: sd3-cd {
+ sd3_cd: sd3-cd-pins {
samsung,pins = "gpk3-2";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
- sd3_bus1: sd3-bus-width1 {
+ sd3_bus1: sd3-bus-width1-pins {
samsung,pins = "gpk3-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
- sd3_bus4: sd3-bus-width4 {
+ sd3_bus4: sd3-bus-width4-pins {
samsung,pins = "gpk3-3", "gpk3-4", "gpk3-5", "gpk3-6";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
- eint0: ext-int0 {
+ eint0: ext-int0-pins {
samsung,pins = "gpx0-0";
samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- eint8: ext-int8 {
+ eint8: ext-int8-pins {
samsung,pins = "gpx1-0";
samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- eint15: ext-int15 {
+ eint15: ext-int15-pins {
samsung,pins = "gpx1-7";
samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- eint16: ext-int16 {
+ eint16: ext-int16-pins {
samsung,pins = "gpx2-0";
samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- eint31: ext-int31 {
+ eint31: ext-int31-pins {
samsung,pins = "gpx3-7";
samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- cam_port_a_io: cam-port-a-io {
+ cam_port_a_io: cam-port-a-io-pins {
samsung,pins = "gpj0-0", "gpj0-1", "gpj0-2", "gpj0-3",
"gpj0-4", "gpj0-5", "gpj0-6", "gpj0-7",
"gpj1-0", "gpj1-1", "gpj1-2", "gpj1-4";
@@ -817,21 +817,21 @@ cam_port_a_io: cam-port-a-io {
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- cam_port_a_clk_active: cam-port-a-clk-active {
+ cam_port_a_clk_active: cam-port-a-clk-active-pins {
samsung,pins = "gpj1-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
- cam_port_a_clk_idle: cam-port-a-clk-idle {
+ cam_port_a_clk_idle: cam-port-a-clk-idle-pins {
samsung,pins = "gpj1-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- hdmi_cec: hdmi-cec {
+ hdmi_cec: hdmi-cec-pins {
samsung,pins = "gpx3-6";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
@@ -840,12 +840,12 @@ hdmi_cec: hdmi-cec {
};
&pinctrl_2 {
- gpz: gpz {
+ gpz: gpz-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
};
- i2s0_bus: i2s0-bus {
+ i2s0_bus: i2s0-bus-pins {
samsung,pins = "gpz-0", "gpz-1", "gpz-2", "gpz-3",
"gpz-4", "gpz-5", "gpz-6";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
@@ -853,7 +853,7 @@ i2s0_bus: i2s0-bus {
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- pcm0_bus: pcm0-bus {
+ pcm0_bus: pcm0-bus-pins {
samsung,pins = "gpz-0", "gpz-1", "gpz-2", "gpz-3",
"gpz-4";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
diff --git a/arch/arm/boot/dts/exynos4210-smdkv310.dts b/arch/arm/boot/dts/exynos4210-smdkv310.dts
index d5797a67bf48..a5dfd7fd49b3 100644
--- a/arch/arm/boot/dts/exynos4210-smdkv310.dts
+++ b/arch/arm/boot/dts/exynos4210-smdkv310.dts
@@ -152,14 +152,14 @@ key-e {
};
&pinctrl_1 {
- keypad_rows: keypad-rows {
+ keypad_rows: keypad-rows-pins {
samsung,pins = "gpx2-0", "gpx2-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- keypad_cols: keypad-cols {
+ keypad_cols: keypad-cols-pins {
samsung,pins = "gpx1-0", "gpx1-1", "gpx1-2", "gpx1-3",
"gpx1-4", "gpx1-5", "gpx1-6", "gpx1-7";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
diff --git a/arch/arm/boot/dts/exynos4210-trats.dts b/arch/arm/boot/dts/exynos4210-trats.dts
index 9c4ff7521348..01f44d95f671 100644
--- a/arch/arm/boot/dts/exynos4210-trats.dts
+++ b/arch/arm/boot/dts/exynos4210-trats.dts
@@ -464,19 +464,19 @@ EN32KHZ_CP {
};
&pinctrl_1 {
- bt_shutdown: bt-shutdown {
+ bt_shutdown: bt-shutdown-pins {
samsung,pins = "gpl1-0";
samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
};
- bt_host_wakeup: bt-host-wakeup {
+ bt_host_wakeup: bt-host-wakeup-pins {
samsung,pins = "gpx2-6";
samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
};
- bt_device_wakeup: bt-device-wakeup {
+ bt_device_wakeup: bt-device-wakeup-pins {
samsung,pins = "gpx3-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
diff --git a/arch/arm/boot/dts/exynos4210-universal_c210.dts b/arch/arm/boot/dts/exynos4210-universal_c210.dts
index 9f93e7464aed..170d54a0bb5c 100644
--- a/arch/arm/boot/dts/exynos4210-universal_c210.dts
+++ b/arch/arm/boot/dts/exynos4210-universal_c210.dts
@@ -533,37 +533,37 @@ &ohci {
};
&pinctrl_1 {
- bt_shutdown: bt-shutdown {
+ bt_shutdown: bt-shutdown-pins {
samsung,pins = "gpe1-4";
samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
};
- bt_host_wakeup: bt-host-wakeup {
+ bt_host_wakeup: bt-host-wakeup-pins {
samsung,pins = "gpx2-6";
samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
};
- bt_device_wakeup: bt-device-wakeup {
+ bt_device_wakeup: bt-device-wakeup-pins {
samsung,pins = "gpx3-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
};
- lp3974_irq: lp3974-irq {
+ lp3974_irq: lp3974-irq-pins {
samsung,pins = "gpx0-7", "gpx2-7";
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
};
- hdmi_hpd: hdmi-hpd {
+ hdmi_hpd: hdmi-hpd-pins {
samsung,pins = "gpx3-7";
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
};
};
&pinctrl_0 {
- i2c_ddc_bus: i2c-ddc-bus {
+ i2c_ddc_bus: i2c-ddc-bus-pins {
samsung,pins = "gpe4-2", "gpe4-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
--
2.32.0
Align the pin controller related nodes with dtschema. No functional
change expected.
Signed-off-by: Krzysztof Kozlowski <[email protected]>
---
arch/arm/boot/dts/exynos3250-artik5.dtsi | 10 +-
arch/arm/boot/dts/exynos3250-pinctrl.dtsi | 140 +++++++++++-----------
2 files changed, 75 insertions(+), 75 deletions(-)
diff --git a/arch/arm/boot/dts/exynos3250-artik5.dtsi b/arch/arm/boot/dts/exynos3250-artik5.dtsi
index 829c05b2c405..7b429622a288 100644
--- a/arch/arm/boot/dts/exynos3250-artik5.dtsi
+++ b/arch/arm/boot/dts/exynos3250-artik5.dtsi
@@ -356,7 +356,7 @@ &mshc_1 {
};
&pinctrl_1 {
- bten: bten {
+ bten: bten-pins {
samsung,pins ="gpx1-7";
samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
@@ -364,7 +364,7 @@ bten: bten {
samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_DOWN>;
};
- wlanen: wlanen {
+ wlanen: wlanen-pins {
samsung,pins = "gpx2-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
@@ -372,12 +372,12 @@ wlanen: wlanen {
samsung,pin-val = <1>;
};
- s2mps14_irq: s2mps14-irq {
+ s2mps14_irq: s2mps14-irq-pins {
samsung,pins = "gpx3-5";
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
};
- bthostwake: bthostwake {
+ bthostwake: bthostwake-pins {
samsung,pins = "gpx3-6";
samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
@@ -385,7 +385,7 @@ bthostwake: bthostwake {
samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_NONE>;
};
- btwake: btwake {
+ btwake: btwake-pins {
samsung,pins = "gpx3-7";
samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
diff --git a/arch/arm/boot/dts/exynos3250-pinctrl.dtsi b/arch/arm/boot/dts/exynos3250-pinctrl.dtsi
index a616cb1aca29..cc30d154ec94 100644
--- a/arch/arm/boot/dts/exynos3250-pinctrl.dtsi
+++ b/arch/arm/boot/dts/exynos3250-pinctrl.dtsi
@@ -12,7 +12,7 @@
#include <dt-bindings/pinctrl/samsung.h>
#define PIN_IN(_pin, _pull, _drv) \
- _pin { \
+ pin- ## _pin { \
samsung,pins = #_pin; \
samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>; \
samsung,pin-pud = <EXYNOS_PIN_PULL_ ##_pull>; \
@@ -20,14 +20,14 @@ _pin { \
}
#define PIN_SLP(_pin, _mode, _pull) \
- _pin { \
+ pin- ## _pin { \
samsung,pins = #_pin; \
samsung,pin-con-pdn = <EXYNOS_PIN_PDN_ ##_mode>; \
samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_ ##_pull>; \
}
&pinctrl_0 {
- gpa0: gpa0 {
+ gpa0: gpa0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -35,7 +35,7 @@ gpa0: gpa0 {
#interrupt-cells = <2>;
};
- gpa1: gpa1 {
+ gpa1: gpa1-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -43,7 +43,7 @@ gpa1: gpa1 {
#interrupt-cells = <2>;
};
- gpb: gpb {
+ gpb: gpb-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -51,7 +51,7 @@ gpb: gpb {
#interrupt-cells = <2>;
};
- gpc0: gpc0 {
+ gpc0: gpc0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -59,7 +59,7 @@ gpc0: gpc0 {
#interrupt-cells = <2>;
};
- gpc1: gpc1 {
+ gpc1: gpc1-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -67,7 +67,7 @@ gpc1: gpc1 {
#interrupt-cells = <2>;
};
- gpd0: gpd0 {
+ gpd0: gpd0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -75,7 +75,7 @@ gpd0: gpd0 {
#interrupt-cells = <2>;
};
- gpd1: gpd1 {
+ gpd1: gpd1-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -83,84 +83,84 @@ gpd1: gpd1 {
#interrupt-cells = <2>;
};
- uart0_data: uart0-data {
+ uart0_data: uart0-data-pins {
samsung,pins = "gpa0-0", "gpa0-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- uart0_fctl: uart0-fctl {
+ uart0_fctl: uart0-fctl-pins {
samsung,pins = "gpa0-2", "gpa0-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- uart1_data: uart1-data {
+ uart1_data: uart1-data-pins {
samsung,pins = "gpa0-4", "gpa0-5";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- uart1_fctl: uart1-fctl {
+ uart1_fctl: uart1-fctl-pins {
samsung,pins = "gpa0-6", "gpa0-7";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- i2c2_bus: i2c2-bus {
+ i2c2_bus: i2c2-bus-pins {
samsung,pins = "gpa0-6", "gpa0-7";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- uart2_data: uart2-data {
+ uart2_data: uart2-data-pins {
samsung,pins = "gpa1-0", "gpa1-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- i2c3_bus: i2c3-bus {
+ i2c3_bus: i2c3-bus-pins {
samsung,pins = "gpa1-2", "gpa1-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- spi0_bus: spi0-bus {
+ spi0_bus: spi0-bus-pins {
samsung,pins = "gpb-0", "gpb-2", "gpb-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- i2c4_bus: i2c4-bus {
+ i2c4_bus: i2c4-bus-pins {
samsung,pins = "gpb-0", "gpb-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- spi1_bus: spi1-bus {
+ spi1_bus: spi1-bus-pins {
samsung,pins = "gpb-4", "gpb-6", "gpb-7";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- i2c5_bus: i2c5-bus {
+ i2c5_bus: i2c5-bus-pins {
samsung,pins = "gpb-2", "gpb-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- i2s2_bus: i2s2-bus {
+ i2s2_bus: i2s2-bus-pins {
samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3",
"gpc1-4";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
@@ -168,7 +168,7 @@ i2s2_bus: i2s2-bus {
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- pcm2_bus: pcm2-bus {
+ pcm2_bus: pcm2-bus-pins {
samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3",
"gpc1-4";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
@@ -176,63 +176,63 @@ pcm2_bus: pcm2-bus {
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- i2c6_bus: i2c6-bus {
+ i2c6_bus: i2c6-bus-pins {
samsung,pins = "gpc1-3", "gpc1-4";
samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- pwm0_out: pwm0-out {
+ pwm0_out: pwm0-out-pins {
samsung,pins = "gpd0-0";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- pwm1_out: pwm1-out {
+ pwm1_out: pwm1-out-pins {
samsung,pins = "gpd0-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- i2c7_bus: i2c7-bus {
+ i2c7_bus: i2c7-bus-pins {
samsung,pins = "gpd0-2", "gpd0-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- pwm2_out: pwm2-out {
+ pwm2_out: pwm2-out-pins {
samsung,pins = "gpd0-2";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- pwm3_out: pwm3-out {
+ pwm3_out: pwm3-out-pins {
samsung,pins = "gpd0-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- i2c0_bus: i2c0-bus {
+ i2c0_bus: i2c0-bus-pins {
samsung,pins = "gpd1-0", "gpd1-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- mipi0_clk: mipi0-clk {
+ mipi0_clk: mipi0-clk-pins {
samsung,pins = "gpd1-0", "gpd1-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- i2c1_bus: i2c1-bus {
+ i2c1_bus: i2c1-bus-pins {
samsung,pins = "gpd1-2", "gpd1-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
@@ -241,22 +241,22 @@ i2c1_bus: i2c1-bus {
};
&pinctrl_1 {
- gpe0: gpe0 {
+ gpe0: gpe0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
};
- gpe1: gpe1 {
+ gpe1: gpe1-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
};
- gpe2: gpe2 {
+ gpe2: gpe2-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
};
- gpk0: gpk0 {
+ gpk0: gpk0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -264,7 +264,7 @@ gpk0: gpk0 {
#interrupt-cells = <2>;
};
- gpk1: gpk1 {
+ gpk1: gpk1-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -272,7 +272,7 @@ gpk1: gpk1 {
#interrupt-cells = <2>;
};
- gpk2: gpk2 {
+ gpk2: gpk2-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -280,7 +280,7 @@ gpk2: gpk2 {
#interrupt-cells = <2>;
};
- gpl0: gpl0 {
+ gpl0: gpl0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -288,7 +288,7 @@ gpl0: gpl0 {
#interrupt-cells = <2>;
};
- gpm0: gpm0 {
+ gpm0: gpm0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -296,7 +296,7 @@ gpm0: gpm0 {
#interrupt-cells = <2>;
};
- gpm1: gpm1 {
+ gpm1: gpm1-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -304,7 +304,7 @@ gpm1: gpm1 {
#interrupt-cells = <2>;
};
- gpm2: gpm2 {
+ gpm2: gpm2-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -312,7 +312,7 @@ gpm2: gpm2 {
#interrupt-cells = <2>;
};
- gpm3: gpm3 {
+ gpm3: gpm3-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -320,7 +320,7 @@ gpm3: gpm3 {
#interrupt-cells = <2>;
};
- gpm4: gpm4 {
+ gpm4: gpm4-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -328,7 +328,7 @@ gpm4: gpm4 {
#interrupt-cells = <2>;
};
- gpx0: gpx0 {
+ gpx0: gpx0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -345,7 +345,7 @@ gpx0: gpx0 {
#interrupt-cells = <2>;
};
- gpx1: gpx1 {
+ gpx1: gpx1-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -362,7 +362,7 @@ gpx1: gpx1 {
#interrupt-cells = <2>;
};
- gpx2: gpx2 {
+ gpx2: gpx2-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -370,7 +370,7 @@ gpx2: gpx2 {
#interrupt-cells = <2>;
};
- gpx3: gpx3 {
+ gpx3: gpx3-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -378,126 +378,126 @@ gpx3: gpx3 {
#interrupt-cells = <2>;
};
- sd0_clk: sd0-clk {
+ sd0_clk: sd0-clk-pins {
samsung,pins = "gpk0-0";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
- sd0_cmd: sd0-cmd {
+ sd0_cmd: sd0-cmd-pins {
samsung,pins = "gpk0-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
- sd0_cd: sd0-cd {
+ sd0_cd: sd0-cd-pins {
samsung,pins = "gpk0-2";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
- sd0_rdqs: sd0-rdqs {
+ sd0_rdqs: sd0-rdqs-pins {
samsung,pins = "gpk0-7";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
- sd0_bus1: sd0-bus-width1 {
+ sd0_bus1: sd0-bus-width1-pins {
samsung,pins = "gpk0-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
- sd0_bus4: sd0-bus-width4 {
+ sd0_bus4: sd0-bus-width4-pins {
samsung,pins = "gpk0-4", "gpk0-5", "gpk0-6";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
- sd0_bus8: sd0-bus-width8 {
+ sd0_bus8: sd0-bus-width8-pins {
samsung,pins = "gpl0-0", "gpl0-1", "gpl0-2", "gpl0-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
- sd1_clk: sd1-clk {
+ sd1_clk: sd1-clk-pins {
samsung,pins = "gpk1-0";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
- sd1_cmd: sd1-cmd {
+ sd1_cmd: sd1-cmd-pins {
samsung,pins = "gpk1-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
- sd1_cd: sd1-cd {
+ sd1_cd: sd1-cd-pins {
samsung,pins = "gpk1-2";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
- sd1_bus1: sd1-bus-width1 {
+ sd1_bus1: sd1-bus-width1-pins {
samsung,pins = "gpk1-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
- sd1_bus4: sd1-bus-width4 {
+ sd1_bus4: sd1-bus-width4-pins {
samsung,pins = "gpk1-4", "gpk1-5", "gpk1-6";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
- sd2_clk: sd2-clk {
+ sd2_clk: sd2-clk-pins {
samsung,pins = "gpk2-0";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
- sd2_cmd: sd2-cmd {
+ sd2_cmd: sd2-cmd-pins {
samsung,pins = "gpk2-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
- sd2_cd: sd2-cd {
+ sd2_cd: sd2-cd-pins {
samsung,pins = "gpk2-2";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
- sd2_bus1: sd2-bus-width1 {
+ sd2_bus1: sd2-bus-width1-pins {
samsung,pins = "gpk2-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
- sd2_bus4: sd2-bus-width4 {
+ sd2_bus4: sd2-bus-width4-pins {
samsung,pins = "gpk2-4", "gpk2-5", "gpk2-6";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
- cam_port_b_io: cam-port-b-io {
+ cam_port_b_io: cam-port-b-io-pins {
samsung,pins = "gpm0-0", "gpm0-1", "gpm0-2", "gpm0-3",
"gpm0-4", "gpm0-5", "gpm0-6", "gpm0-7",
"gpm1-0", "gpm1-1", "gpm2-0", "gpm2-1";
@@ -506,35 +506,35 @@ cam_port_b_io: cam-port-b-io {
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- cam_port_b_clk_active: cam-port-b-clk-active {
+ cam_port_b_clk_active: cam-port-b-clk-active-pins {
samsung,pins = "gpm2-2";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
- cam_port_b_clk_idle: cam-port-b-clk-idle {
+ cam_port_b_clk_idle: cam-port-b-clk-idle-pins {
samsung,pins = "gpm2-2";
samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- fimc_is_i2c0: fimc-is-i2c0 {
+ fimc_is_i2c0: fimc-is-i2c0-pins {
samsung,pins = "gpm4-0", "gpm4-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- fimc_is_i2c1: fimc-is-i2c1 {
+ fimc_is_i2c1: fimc-is-i2c1-pins {
samsung,pins = "gpm4-2", "gpm4-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- fimc_is_uart: fimc-is-uart {
+ fimc_is_uart: fimc-is-uart-pins {
samsung,pins = "gpm3-5", "gpm3-7";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
--
2.32.0
Align the pin controller related nodes with dtschema. No functional
change expected.
Signed-off-by: Krzysztof Kozlowski <[email protected]>
---
arch/arm/boot/dts/exynos5250-arndale.dts | 2 +-
arch/arm/boot/dts/exynos5250-pinctrl.dtsi | 220 +++++++++---------
arch/arm/boot/dts/exynos5250-smdk5250.dts | 2 +-
arch/arm/boot/dts/exynos5250-snow-common.dtsi | 22 +-
arch/arm/boot/dts/exynos5250-snow-rev5.dts | 2 +-
arch/arm/boot/dts/exynos5250-snow.dts | 2 +-
arch/arm/boot/dts/exynos5250-spring.dts | 20 +-
7 files changed, 135 insertions(+), 135 deletions(-)
diff --git a/arch/arm/boot/dts/exynos5250-arndale.dts b/arch/arm/boot/dts/exynos5250-arndale.dts
index 3583095fbb2a..693bf9e48183 100644
--- a/arch/arm/boot/dts/exynos5250-arndale.dts
+++ b/arch/arm/boot/dts/exynos5250-arndale.dts
@@ -590,7 +590,7 @@ &mmc_2 {
};
&pinctrl_0 {
- s5m8767_irq: s5m8767-irq {
+ s5m8767_irq: s5m8767-irq-pins {
samsung,pins = "gpx3-2";
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
};
diff --git a/arch/arm/boot/dts/exynos5250-pinctrl.dtsi b/arch/arm/boot/dts/exynos5250-pinctrl.dtsi
index d7d756614edd..918947a3897e 100644
--- a/arch/arm/boot/dts/exynos5250-pinctrl.dtsi
+++ b/arch/arm/boot/dts/exynos5250-pinctrl.dtsi
@@ -12,7 +12,7 @@
#include <dt-bindings/pinctrl/samsung.h>
&pinctrl_0 {
- gpa0: gpa0 {
+ gpa0: gpa0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -20,7 +20,7 @@ gpa0: gpa0 {
#interrupt-cells = <2>;
};
- gpa1: gpa1 {
+ gpa1: gpa1-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -28,7 +28,7 @@ gpa1: gpa1 {
#interrupt-cells = <2>;
};
- gpa2: gpa2 {
+ gpa2: gpa2-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -36,7 +36,7 @@ gpa2: gpa2 {
#interrupt-cells = <2>;
};
- gpb0: gpb0 {
+ gpb0: gpb0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -44,7 +44,7 @@ gpb0: gpb0 {
#interrupt-cells = <2>;
};
- gpb1: gpb1 {
+ gpb1: gpb1-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -52,7 +52,7 @@ gpb1: gpb1 {
#interrupt-cells = <2>;
};
- gpb2: gpb2 {
+ gpb2: gpb2-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -60,7 +60,7 @@ gpb2: gpb2 {
#interrupt-cells = <2>;
};
- gpb3: gpb3 {
+ gpb3: gpb3-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -68,7 +68,7 @@ gpb3: gpb3 {
#interrupt-cells = <2>;
};
- gpc0: gpc0 {
+ gpc0: gpc0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -76,7 +76,7 @@ gpc0: gpc0 {
#interrupt-cells = <2>;
};
- gpc1: gpc1 {
+ gpc1: gpc1-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -84,7 +84,7 @@ gpc1: gpc1 {
#interrupt-cells = <2>;
};
- gpc2: gpc2 {
+ gpc2: gpc2-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -92,7 +92,7 @@ gpc2: gpc2 {
#interrupt-cells = <2>;
};
- gpc3: gpc3 {
+ gpc3: gpc3-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -100,7 +100,7 @@ gpc3: gpc3 {
#interrupt-cells = <2>;
};
- gpd0: gpd0 {
+ gpd0: gpd0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -108,7 +108,7 @@ gpd0: gpd0 {
#interrupt-cells = <2>;
};
- gpd1: gpd1 {
+ gpd1: gpd1-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -116,42 +116,42 @@ gpd1: gpd1 {
#interrupt-cells = <2>;
};
- gpy0: gpy0 {
+ gpy0: gpy0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
};
- gpy1: gpy1 {
+ gpy1: gpy1-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
};
- gpy2: gpy2 {
+ gpy2: gpy2-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
};
- gpy3: gpy3 {
+ gpy3: gpy3-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
};
- gpy4: gpy4 {
+ gpy4: gpy4-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
};
- gpy5: gpy5 {
+ gpy5: gpy5-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
};
- gpy6: gpy6 {
+ gpy6: gpy6-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
};
- gpc4: gpc4 {
+ gpc4: gpc4-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -159,7 +159,7 @@ gpc4: gpc4 {
#interrupt-cells = <2>;
};
- gpx0: gpx0 {
+ gpx0: gpx0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -170,7 +170,7 @@ gpx0: gpx0 {
<26 0>, <26 1>, <27 0>, <27 1>;
};
- gpx1: gpx1 {
+ gpx1: gpx1-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -181,7 +181,7 @@ gpx1: gpx1 {
<30 0>, <30 1>, <31 0>, <31 1>;
};
- gpx2: gpx2 {
+ gpx2: gpx2-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -189,7 +189,7 @@ gpx2: gpx2 {
#interrupt-cells = <2>;
};
- gpx3: gpx3 {
+ gpx3: gpx3-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -197,104 +197,104 @@ gpx3: gpx3 {
#interrupt-cells = <2>;
};
- uart0_data: uart0-data {
+ uart0_data: uart0-data-pins {
samsung,pins = "gpa0-0", "gpa0-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- uart0_fctl: uart0-fctl {
+ uart0_fctl: uart0-fctl-pins {
samsung,pins = "gpa0-2", "gpa0-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- i2c2_bus: i2c2-bus {
+ i2c2_bus: i2c2-bus-pins {
samsung,pins = "gpa0-6", "gpa0-7";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- i2c2_hs_bus: i2c2-hs-bus {
+ i2c2_hs_bus: i2c2-hs-bus-pins {
samsung,pins = "gpa0-6", "gpa0-7";
samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- i2c2_gpio_bus: i2c2-gpio-bus {
+ i2c2_gpio_bus: i2c2-gpio-bus-pins {
samsung,pins = "gpa0-6", "gpa0-7";
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- uart2_data: uart2-data {
+ uart2_data: uart2-data-pins {
samsung,pins = "gpa1-0", "gpa1-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- uart2_fctl: uart2-fctl {
+ uart2_fctl: uart2-fctl-pins {
samsung,pins = "gpa1-2", "gpa1-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- i2c3_bus: i2c3-bus {
+ i2c3_bus: i2c3-bus-pins {
samsung,pins = "gpa1-2", "gpa1-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- i2c3_hs_bus: i2c3-hs-bus {
+ i2c3_hs_bus: i2c3-hs-bus-pins {
samsung,pins = "gpa1-2", "gpa1-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- uart3_data: uart3-data {
+ uart3_data: uart3-data-pins {
samsung,pins = "gpa1-4", "gpa1-5";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- spi0_bus: spi0-bus {
+ spi0_bus: spi0-bus-pins {
samsung,pins = "gpa2-0", "gpa2-2", "gpa2-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- i2c4_bus: i2c4-bus {
+ i2c4_bus: i2c4-bus-pins {
samsung,pins = "gpa2-0", "gpa2-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- i2c5_bus: i2c5-bus {
+ i2c5_bus: i2c5-bus-pins {
samsung,pins = "gpa2-2", "gpa2-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- spi1_bus: spi1-bus {
+ spi1_bus: spi1-bus-pins {
samsung,pins = "gpa2-4", "gpa2-6", "gpa2-7";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- i2s1_bus: i2s1-bus {
+ i2s1_bus: i2s1-bus-pins {
samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2", "gpb0-3",
"gpb0-4";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
@@ -302,7 +302,7 @@ i2s1_bus: i2s1-bus {
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- pcm1_bus: pcm1-bus {
+ pcm1_bus: pcm1-bus-pins {
samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2", "gpb0-3",
"gpb0-4";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
@@ -310,7 +310,7 @@ pcm1_bus: pcm1-bus {
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- ac97_bus: ac97-bus {
+ ac97_bus: ac97-bus-pins {
samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2", "gpb0-3",
"gpb0-4";
samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
@@ -318,7 +318,7 @@ ac97_bus: ac97-bus {
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- i2s2_bus: i2s2-bus {
+ i2s2_bus: i2s2-bus-pins {
samsung,pins = "gpb1-0", "gpb1-1", "gpb1-2", "gpb1-3",
"gpb1-4";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
@@ -326,7 +326,7 @@ i2s2_bus: i2s2-bus {
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- pcm2_bus: pcm2-bus {
+ pcm2_bus: pcm2-bus-pins {
samsung,pins = "gpb1-0", "gpb1-1", "gpb1-2", "gpb1-3",
"gpb1-4";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
@@ -334,280 +334,280 @@ pcm2_bus: pcm2-bus {
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- spdif_bus: spdif-bus {
+ spdif_bus: spdif-bus-pins {
samsung,pins = "gpb1-0", "gpb1-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- spi2_bus: spi2-bus {
+ spi2_bus: spi2-bus-pins {
samsung,pins = "gpb1-1", "gpb1-3", "gpb1-4";
samsung,pin-function = <EXYNOS_PIN_FUNC_5>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- i2c6_bus: i2c6-bus {
+ i2c6_bus: i2c6-bus-pins {
samsung,pins = "gpb1-3", "gpb1-4";
samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- pwm0_out: pwm0-out {
+ pwm0_out: pwm0-out-pins {
samsung,pins = "gpb2-0";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- pwm1_out: pwm1-out {
+ pwm1_out: pwm1-out-pins {
samsung,pins = "gpb2-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- pwm2_out: pwm2-out {
+ pwm2_out: pwm2-out-pins {
samsung,pins = "gpb2-2";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- pwm3_out: pwm3-out {
+ pwm3_out: pwm3-out-pins {
samsung,pins = "gpb2-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- i2c7_bus: i2c7-bus {
+ i2c7_bus: i2c7-bus-pins {
samsung,pins = "gpb2-2", "gpb2-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- i2c0_bus: i2c0-bus {
+ i2c0_bus: i2c0-bus-pins {
samsung,pins = "gpb3-0", "gpb3-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- i2c1_bus: i2c1-bus {
+ i2c1_bus: i2c1-bus-pins {
samsung,pins = "gpb3-2", "gpb3-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- i2c0_hs_bus: i2c0-hs-bus {
+ i2c0_hs_bus: i2c0-hs-bus-pins {
samsung,pins = "gpb3-0", "gpb3-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- i2c1_hs_bus: i2c1-hs-bus {
+ i2c1_hs_bus: i2c1-hs-bus-pins {
samsung,pins = "gpb3-2", "gpb3-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- sd0_clk: sd0-clk {
+ sd0_clk: sd0-clk-pins {
samsung,pins = "gpc0-0";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
- sd0_cmd: sd0-cmd {
+ sd0_cmd: sd0-cmd-pins {
samsung,pins = "gpc0-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
- sd0_cd: sd0-cd {
+ sd0_cd: sd0-cd-pins {
samsung,pins = "gpc0-2";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
- sd0_bus1: sd0-bus-width1 {
+ sd0_bus1: sd0-bus-width1-pins {
samsung,pins = "gpc0-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
- sd0_bus4: sd0-bus-width4 {
+ sd0_bus4: sd0-bus-width4-pins {
samsung,pins = "gpc0-3", "gpc0-4", "gpc0-5", "gpc0-6";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
- sd0_bus8: sd0-bus-width8 {
+ sd0_bus8: sd0-bus-width8-pins {
samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
- sd1_clk: sd1-clk {
+ sd1_clk: sd1-clk-pins {
samsung,pins = "gpc2-0";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
- sd1_cmd: sd1-cmd {
+ sd1_cmd: sd1-cmd-pins {
samsung,pins = "gpc2-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
- sd1_cd: sd1-cd {
+ sd1_cd: sd1-cd-pins {
samsung,pins = "gpc2-2";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
- sd1_bus1: sd1-bus-width1 {
+ sd1_bus1: sd1-bus-width1-pins {
samsung,pins = "gpc2-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
- sd1_bus4: sd1-bus-width4 {
+ sd1_bus4: sd1-bus-width4-pins {
samsung,pins = "gpc2-3", "gpc2-4", "gpc2-5", "gpc2-6";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
- sd2_clk: sd2-clk {
+ sd2_clk: sd2-clk-pins {
samsung,pins = "gpc3-0";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
- sd2_cmd: sd2-cmd {
+ sd2_cmd: sd2-cmd-pins {
samsung,pins = "gpc3-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
- sd2_cd: sd2-cd {
+ sd2_cd: sd2-cd-pins {
samsung,pins = "gpc3-2";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
- sd2_bus1: sd2-bus-width1 {
+ sd2_bus1: sd2-bus-width1-pins {
samsung,pins = "gpc3-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
- sd2_bus4: sd2-bus-width4 {
+ sd2_bus4: sd2-bus-width4-pins {
samsung,pins = "gpc3-3", "gpc3-4", "gpc3-5", "gpc3-6";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
- sd2_bus8: sd2-bus-width8 {
+ sd2_bus8: sd2-bus-width8-pins {
samsung,pins = "gpc4-3", "gpc4-4", "gpc4-5", "gpc4-6";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
- sd3_clk: sd3-clk {
+ sd3_clk: sd3-clk-pins {
samsung,pins = "gpc4-0";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
- sd3_cmd: sd3-cmd {
+ sd3_cmd: sd3-cmd-pins {
samsung,pins = "gpc4-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
- sd3_cd: sd3-cd {
+ sd3_cd: sd3-cd-pins {
samsung,pins = "gpc4-2";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
- sd3_bus1: sd3-bus-width1 {
+ sd3_bus1: sd3-bus-width1-pins {
samsung,pins = "gpc4-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
- sd3_bus4: sd3-bus-width4 {
+ sd3_bus4: sd3-bus-width4-pins {
samsung,pins = "gpc4-3", "gpc4-4", "gpc4-5", "gpc4-6";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
- uart1_data: uart1-data {
+ uart1_data: uart1-data-pins {
samsung,pins = "gpd0-0", "gpd0-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- uart1_fctl: uart1-fctl {
+ uart1_fctl: uart1-fctl-pins {
samsung,pins = "gpd0-2", "gpd0-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- dp_hpd: dp_hpd {
+ dp_hpd: dp-hpd-pins {
samsung,pins = "gpx0-7";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- hdmi_cec: hdmi-cec {
+ hdmi_cec: hdmi-cec-pins {
samsung,pins = "gpx3-6";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- hdmi_hpd: hdmi-hpd {
+ hdmi_hpd: hdmi-hpd-pins {
samsung,pins = "gpx3-7";
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
};
};
&pinctrl_1 {
- gpe0: gpe0 {
+ gpe0: gpe0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -615,7 +615,7 @@ gpe0: gpe0 {
#interrupt-cells = <2>;
};
- gpe1: gpe1 {
+ gpe1: gpe1-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -623,7 +623,7 @@ gpe1: gpe1 {
#interrupt-cells = <2>;
};
- gpf0: gpf0 {
+ gpf0: gpf0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -631,7 +631,7 @@ gpf0: gpf0 {
#interrupt-cells = <2>;
};
- gpf1: gpf1 {
+ gpf1: gpf1-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -639,7 +639,7 @@ gpf1: gpf1 {
#interrupt-cells = <2>;
};
- gpg0: gpg0 {
+ gpg0: gpg0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -647,7 +647,7 @@ gpg0: gpg0 {
#interrupt-cells = <2>;
};
- gpg1: gpg1 {
+ gpg1: gpg1-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -655,7 +655,7 @@ gpg1: gpg1 {
#interrupt-cells = <2>;
};
- gpg2: gpg2 {
+ gpg2: gpg2-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -663,7 +663,7 @@ gpg2: gpg2 {
#interrupt-cells = <2>;
};
- gph0: gph0 {
+ gph0: gph0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -671,7 +671,7 @@ gph0: gph0 {
#interrupt-cells = <2>;
};
- gph1: gph1 {
+ gph1: gph1-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -679,7 +679,7 @@ gph1: gph1 {
#interrupt-cells = <2>;
};
- cam_gpio_a: cam-gpio-a {
+ cam_gpio_a: cam-gpio-a-pins {
samsung,pins = "gpe0-0", "gpe0-1", "gpe0-2", "gpe0-3",
"gpe0-4", "gpe0-5", "gpe0-6", "gpe0-7",
"gpe1-0", "gpe1-1";
@@ -688,7 +688,7 @@ cam_gpio_a: cam-gpio-a {
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- cam_gpio_b: cam-gpio-b {
+ cam_gpio_b: cam-gpio-b-pins {
samsung,pins = "gpf0-0", "gpf0-1", "gpf0-2", "gpf0-3",
"gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
@@ -696,42 +696,42 @@ cam_gpio_b: cam-gpio-b {
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- cam_i2c2_bus: cam-i2c2-bus {
+ cam_i2c2_bus: cam-i2c2-bus-pins {
samsung,pins = "gpe0-6", "gpe1-0";
samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- cam_spi1_bus: cam-spi1-bus {
+ cam_spi1_bus: cam-spi1-bus-pins {
samsung,pins = "gpe0-4", "gpe0-5", "gpf0-2", "gpf0-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- cam_i2c1_bus: cam-i2c1-bus {
+ cam_i2c1_bus: cam-i2c1-bus-pins {
samsung,pins = "gpf0-2", "gpf0-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- cam_i2c0_bus: cam-i2c0-bus {
+ cam_i2c0_bus: cam-i2c0-bus-pins {
samsung,pins = "gpf0-0", "gpf0-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- cam_spi0_bus: cam-spi0-bus {
+ cam_spi0_bus: cam-spi0-bus-pins {
samsung,pins = "gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- cam_bayrgb_bus: cam-bayrgb-bus {
+ cam_bayrgb_bus: cam-bayrgb-bus-pins {
samsung,pins = "gpg0-0", "gpg0-1", "gpg0-2", "gpg0-3",
"gpg0-4", "gpg0-5", "gpg0-6", "gpg0-7",
"gpg1-0", "gpg1-1", "gpg1-2", "gpg1-3",
@@ -742,7 +742,7 @@ cam_bayrgb_bus: cam-bayrgb-bus {
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- cam_port_a: cam-port-a {
+ cam_port_a: cam-port-a-pins {
samsung,pins = "gph0-0", "gph0-1", "gph0-2", "gph0-3",
"gph1-0", "gph1-1", "gph1-2", "gph1-3",
"gph1-4", "gph1-5", "gph1-6", "gph1-7";
@@ -753,7 +753,7 @@ cam_port_a: cam-port-a {
};
&pinctrl_2 {
- gpv0: gpv0 {
+ gpv0: gpv0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -761,7 +761,7 @@ gpv0: gpv0 {
#interrupt-cells = <2>;
};
- gpv1: gpv1 {
+ gpv1: gpv1-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -769,7 +769,7 @@ gpv1: gpv1 {
#interrupt-cells = <2>;
};
- gpv2: gpv2 {
+ gpv2: gpv2-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -777,7 +777,7 @@ gpv2: gpv2 {
#interrupt-cells = <2>;
};
- gpv3: gpv3 {
+ gpv3: gpv3-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -785,7 +785,7 @@ gpv3: gpv3 {
#interrupt-cells = <2>;
};
- gpv4: gpv4 {
+ gpv4: gpv4-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -793,7 +793,7 @@ gpv4: gpv4 {
#interrupt-cells = <2>;
};
- c2c_rxd: c2c-rxd {
+ c2c_rxd: c2c-rxd-pins {
samsung,pins = "gpv0-0", "gpv0-1", "gpv0-2", "gpv0-3",
"gpv0-4", "gpv0-5", "gpv0-6", "gpv0-7",
"gpv1-0", "gpv1-1", "gpv1-2", "gpv1-3",
@@ -803,7 +803,7 @@ c2c_rxd: c2c-rxd {
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- c2c_txd: c2c-txd {
+ c2c_txd: c2c-txd-pins {
samsung,pins = "gpv2-0", "gpv2-1", "gpv2-2", "gpv2-3",
"gpv2-4", "gpv2-5", "gpv2-6", "gpv2-7",
"gpv3-0", "gpv3-1", "gpv3-2", "gpv3-3",
@@ -815,7 +815,7 @@ c2c_txd: c2c-txd {
};
&pinctrl_3 {
- gpz: gpz {
+ gpz: gpz-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -823,7 +823,7 @@ gpz: gpz {
#interrupt-cells = <2>;
};
- i2s0_bus: i2s0-bus {
+ i2s0_bus: i2s0-bus-pins {
samsung,pins = "gpz-0", "gpz-1", "gpz-2", "gpz-3",
"gpz-4", "gpz-5", "gpz-6";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
diff --git a/arch/arm/boot/dts/exynos5250-smdk5250.dts b/arch/arm/boot/dts/exynos5250-smdk5250.dts
index 39bbe18145cf..497fbd009ae5 100644
--- a/arch/arm/boot/dts/exynos5250-smdk5250.dts
+++ b/arch/arm/boot/dts/exynos5250-smdk5250.dts
@@ -410,7 +410,7 @@ partition@40000 {
};
&pinctrl_0 {
- max77686_irq: max77686-irq {
+ max77686_irq: max77686-irq-pins {
samsung,pins = "gpx3-2";
samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
diff --git a/arch/arm/boot/dts/exynos5250-snow-common.dtsi b/arch/arm/boot/dts/exynos5250-snow-common.dtsi
index 2335c4687349..f7f5630a620b 100644
--- a/arch/arm/boot/dts/exynos5250-snow-common.dtsi
+++ b/arch/arm/boot/dts/exynos5250-snow-common.dtsi
@@ -587,63 +587,63 @@ &mmc_3 {
};
&pinctrl_0 {
- wifi_en: wifi-en {
+ wifi_en: wifi-en-pins {
samsung,pins = "gpx0-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- wifi_rst: wifi-rst {
+ wifi_rst: wifi-rst-pins {
samsung,pins = "gpx0-2";
samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- power_key_irq: power-key-irq {
+ power_key_irq: power-key-irq-pins {
samsung,pins = "gpx1-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- ec_irq: ec-irq {
+ ec_irq: ec-irq-pins {
samsung,pins = "gpx1-6";
samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- tps65090_irq: tps65090-irq {
+ tps65090_irq: tps65090-irq-pins {
samsung,pins = "gpx2-6";
samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- usb3_vbus_en: usb3-vbus-en {
+ usb3_vbus_en: usb3-vbus-en-pins {
samsung,pins = "gpx2-7";
samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- max77686_irq: max77686-irq {
+ max77686_irq: max77686-irq-pins {
samsung,pins = "gpx3-2";
samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- lid_irq: lid-irq {
+ lid_irq: lid-irq-pins {
samsung,pins = "gpx3-5";
samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- hdmi_hpd_irq: hdmi-hpd-irq {
+ hdmi_hpd_irq: hdmi-hpd-irq-pins {
samsung,pins = "gpx3-7";
samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
@@ -652,14 +652,14 @@ hdmi_hpd_irq: hdmi-hpd-irq {
};
&pinctrl_1 {
- arb_their_claim: arb-their-claim {
+ arb_their_claim: arb-their-claim-pins {
samsung,pins = "gpe0-4";
samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- arb_our_claim: arb-our-claim {
+ arb_our_claim: arb-our-claim-pins {
samsung,pins = "gpf0-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
diff --git a/arch/arm/boot/dts/exynos5250-snow-rev5.dts b/arch/arm/boot/dts/exynos5250-snow-rev5.dts
index f8ca61df6981..0a47597d6f0d 100644
--- a/arch/arm/boot/dts/exynos5250-snow-rev5.dts
+++ b/arch/arm/boot/dts/exynos5250-snow-rev5.dts
@@ -47,7 +47,7 @@ max98090: audio-codec@10 {
};
&pinctrl_0 {
- max98090_irq: max98090-irq {
+ max98090_irq: max98090-irq-pins {
samsung,pins = "gpx0-4";
samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
diff --git a/arch/arm/boot/dts/exynos5250-snow.dts b/arch/arm/boot/dts/exynos5250-snow.dts
index a630bc654a49..906aa7aae710 100644
--- a/arch/arm/boot/dts/exynos5250-snow.dts
+++ b/arch/arm/boot/dts/exynos5250-snow.dts
@@ -43,7 +43,7 @@ max98095: audio-codec@11 {
};
&pinctrl_0 {
- max98095_en: max98095-en {
+ max98095_en: max98095-en-pins {
samsung,pins = "gpx1-7";
samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
diff --git a/arch/arm/boot/dts/exynos5250-spring.dts b/arch/arm/boot/dts/exynos5250-spring.dts
index e0feedcf54bb..d52b5e4e5870 100644
--- a/arch/arm/boot/dts/exynos5250-spring.dts
+++ b/arch/arm/boot/dts/exynos5250-spring.dts
@@ -451,63 +451,63 @@ &mmc_1 {
};
&pinctrl_0 {
- s5m8767_dvs: s5m8767-dvs {
+ s5m8767_dvs: s5m8767-dvs-pins {
samsung,pins = "gpd1-0", "gpd1-1", "gpd1-2";
samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- dp_hpd_gpio: dp-hpd {
+ dp_hpd_gpio: dp-hpd-pins {
samsung,pins = "gpc3-0";
samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- trackpad_irq: trackpad-irq {
+ trackpad_irq: trackpad-irq-pins {
samsung,pins = "gpx1-2";
samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- power_key_irq: power-key-irq {
+ power_key_irq: power-key-irq-pins {
samsung,pins = "gpx1-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- ec_irq: ec-irq {
+ ec_irq: ec-irq-pins {
samsung,pins = "gpx1-6";
samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- s5m8767_ds: s5m8767-ds {
+ s5m8767_ds: s5m8767-ds-pins {
samsung,pins = "gpx2-3", "gpx2-4", "gpx2-5";
samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- s5m8767_irq: s5m8767-irq {
+ s5m8767_irq: s5m8767-irq-pins {
samsung,pins = "gpx3-2";
samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- lid_irq: lid-irq {
+ lid_irq: lid-irq-pins {
samsung,pins = "gpx3-5";
samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- hdmi_hpd_irq: hdmi-hpd-irq {
+ hdmi_hpd_irq: hdmi-hpd-irq-pins {
samsung,pins = "gpx3-7";
samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
@@ -516,7 +516,7 @@ hdmi_hpd_irq: hdmi-hpd-irq {
};
&pinctrl_1 {
- hsic_reset: hsic-reset {
+ hsic_reset: hsic-reset-pins {
samsung,pins = "gpe1-0";
samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
--
2.32.0
Align the pin controller related nodes with dtschema. No functional
change expected.
Signed-off-by: Krzysztof Kozlowski <[email protected]>
---
arch/arm/boot/dts/exynos4412-galaxy-s3.dtsi | 4 +-
arch/arm/boot/dts/exynos4412-itop-elite.dts | 2 +-
.../boot/dts/exynos4412-itop-scp-core.dtsi | 2 +-
arch/arm/boot/dts/exynos4412-midas.dtsi | 30 +--
.../boot/dts/exynos4412-odroid-common.dtsi | 8 +-
arch/arm/boot/dts/exynos4412-odroidx.dts | 2 +-
arch/arm/boot/dts/exynos4412-origen.dts | 4 +-
arch/arm/boot/dts/exynos4412-p4note.dtsi | 44 +--
arch/arm/boot/dts/exynos4412-pinctrl.dtsi | 252 +++++++++---------
arch/arm/boot/dts/exynos4412-smdk4412.dts | 4 +-
10 files changed, 176 insertions(+), 176 deletions(-)
diff --git a/arch/arm/boot/dts/exynos4412-galaxy-s3.dtsi b/arch/arm/boot/dts/exynos4412-galaxy-s3.dtsi
index c14e37dc3a9b..03dffc690b79 100644
--- a/arch/arm/boot/dts/exynos4412-galaxy-s3.dtsi
+++ b/arch/arm/boot/dts/exynos4412-galaxy-s3.dtsi
@@ -151,13 +151,13 @@ &ldo25_reg {
};
&pinctrl_0 {
- camera_flash_host: camera-flash-host {
+ camera_flash_host: camera-flash-host-pins {
samsung,pins = "gpj1-0";
samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
samsung,pin-val = <0>;
};
- camera_flash_isp: camera-flash-isp {
+ camera_flash_isp: camera-flash-isp-pins {
samsung,pins = "gpj1-0";
samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
samsung,pin-val = <1>;
diff --git a/arch/arm/boot/dts/exynos4412-itop-elite.dts b/arch/arm/boot/dts/exynos4412-itop-elite.dts
index 47431307cb3c..a9406280b979 100644
--- a/arch/arm/boot/dts/exynos4412-itop-elite.dts
+++ b/arch/arm/boot/dts/exynos4412-itop-elite.dts
@@ -192,7 +192,7 @@ &i2s0 {
};
&pinctrl_1 {
- ether-reset {
+ ether-reset-pins {
samsung,pins = "gpc0-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
diff --git a/arch/arm/boot/dts/exynos4412-itop-scp-core.dtsi b/arch/arm/boot/dts/exynos4412-itop-scp-core.dtsi
index b3726d4d7d93..a67cb61e3cbb 100644
--- a/arch/arm/boot/dts/exynos4412-itop-scp-core.dtsi
+++ b/arch/arm/boot/dts/exynos4412-itop-scp-core.dtsi
@@ -484,7 +484,7 @@ &mshc_0 {
};
&pinctrl_1 {
- hsic_reset: hsic-reset {
+ hsic_reset: hsic-reset-pins {
samsung,pins = "gpm2-4";
samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
diff --git a/arch/arm/boot/dts/exynos4412-midas.dtsi b/arch/arm/boot/dts/exynos4412-midas.dtsi
index 968c7943653e..23f50c9be527 100644
--- a/arch/arm/boot/dts/exynos4412-midas.dtsi
+++ b/arch/arm/boot/dts/exynos4412-midas.dtsi
@@ -987,19 +987,19 @@ &pinctrl_0 {
pinctrl-names = "default";
pinctrl-0 = <&sleep0>;
- mhl_int: mhl-int {
+ mhl_int: mhl-int-pins {
samsung,pins = "gpf3-5";
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
};
- i2c_mhl_bus: i2c-mhl-bus {
+ i2c_mhl_bus: i2c-mhl-bus-pins {
samsung,pins = "gpf0-4", "gpf0-6";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- sleep0: sleep-states {
+ sleep0: sleep-state {
PIN_SLP(gpa0-0, INPUT, NONE);
PIN_SLP(gpa0-1, OUT0, NONE);
PIN_SLP(gpa0-2, INPUT, NONE);
@@ -1102,52 +1102,52 @@ &pinctrl_1 {
pinctrl-names = "default";
pinctrl-0 = <&sleep1>;
- gpio_keys: gpio-keys {
+ gpio_keys: gpio-keys-pins {
samsung,pins = "gpx0-1", "gpx2-2", "gpx2-7", "gpx3-3";
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
};
- bt_shutdown: bt-shutdown {
+ bt_shutdown: bt-shutdown-pins {
samsung,pins = "gpl0-6";
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
};
- bt_host_wakeup: bt-host-wakeup {
+ bt_host_wakeup: bt-host-wakeup-pins {
samsung,pins = "gpx2-6";
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
};
- bt_device_wakeup: bt-device-wakeup {
+ bt_device_wakeup: bt-device-wakeup-pins {
samsung,pins = "gpx3-1";
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
};
- max77686_irq: max77686-irq {
+ max77686_irq: max77686-irq-pins {
samsung,pins = "gpx0-7";
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
};
- max77693_irq: max77693-irq {
+ max77693_irq: max77693-irq-pins {
samsung,pins = "gpx1-5";
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
};
- max77693_fuel_irq: max77693-fuel-irq {
+ max77693_fuel_irq: max77693-fuel-irq-pins {
samsung,pins = "gpx2-3";
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
};
- sdhci2_cd: sdhci2-cd-irq {
+ sdhci2_cd: sdhci2-cd-irq-pins {
samsung,pins = "gpx3-4";
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
};
- hdmi_hpd: hdmi-hpd {
+ hdmi_hpd: hdmi-hpd-pins {
samsung,pins = "gpx3-7";
samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
};
- sleep1: sleep-states {
+ sleep1: sleep-state {
PIN_SLP(gpk0-0, PREV, NONE);
PIN_SLP(gpk0-1, PREV, NONE);
PIN_SLP(gpk0-2, OUT0, NONE);
@@ -1300,7 +1300,7 @@ &pinctrl_2 {
pinctrl-names = "default";
pinctrl-0 = <&sleep2>;
- sleep2: sleep-states {
+ sleep2: sleep-state {
PIN_SLP(gpz-0, INPUT, DOWN);
PIN_SLP(gpz-1, INPUT, DOWN);
PIN_SLP(gpz-2, INPUT, DOWN);
@@ -1315,7 +1315,7 @@ &pinctrl_3 {
pinctrl-names = "default";
pinctrl-0 = <&sleep3>;
- sleep3: sleep-states {
+ sleep3: sleep-state {
PIN_SLP(gpv0-0, INPUT, DOWN);
PIN_SLP(gpv0-1, INPUT, DOWN);
PIN_SLP(gpv0-2, INPUT, DOWN);
diff --git a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
index 5b1d4591b35c..e7669b9e9edb 100644
--- a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
+++ b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
@@ -172,24 +172,24 @@ cooling_map1: map1 {
};
&pinctrl_1 {
- gpio_power_key: power-key {
+ gpio_power_key: power-key-pins {
samsung,pins = "gpx1-3";
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
};
- max77686_irq: max77686-irq {
+ max77686_irq: max77686-irq-pins {
samsung,pins = "gpx3-2";
samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- hdmi_hpd: hdmi-hpd {
+ hdmi_hpd: hdmi-hpd-pins {
samsung,pins = "gpx3-7";
samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
};
- emmc_rstn: emmc-rstn {
+ emmc_rstn: emmc-rstn-pins {
samsung,pins = "gpk1-2";
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
};
diff --git a/arch/arm/boot/dts/exynos4412-odroidx.dts b/arch/arm/boot/dts/exynos4412-odroidx.dts
index 440135d0ff2a..a9fada51eb50 100644
--- a/arch/arm/boot/dts/exynos4412-odroidx.dts
+++ b/arch/arm/boot/dts/exynos4412-odroidx.dts
@@ -112,7 +112,7 @@ &mshc_0 {
};
&pinctrl_1 {
- gpio_home_key: home-key {
+ gpio_home_key: home-key-pins {
samsung,pins = "gpx2-2";
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
};
diff --git a/arch/arm/boot/dts/exynos4412-origen.dts b/arch/arm/boot/dts/exynos4412-origen.dts
index e6aec5facabf..6db09dba07ff 100644
--- a/arch/arm/boot/dts/exynos4412-origen.dts
+++ b/arch/arm/boot/dts/exynos4412-origen.dts
@@ -506,14 +506,14 @@ &mshc_0 {
};
&pinctrl_1 {
- keypad_rows: keypad-rows {
+ keypad_rows: keypad-rows-pins {
samsung,pins = "gpx2-0", "gpx2-1", "gpx2-2";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- keypad_cols: keypad-cols {
+ keypad_cols: keypad-cols-pins {
samsung,pins = "gpx1-0", "gpx1-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
diff --git a/arch/arm/boot/dts/exynos4412-p4note.dtsi b/arch/arm/boot/dts/exynos4412-p4note.dtsi
index 22c3086e0076..b386a9b8e188 100644
--- a/arch/arm/boot/dts/exynos4412-p4note.dtsi
+++ b/arch/arm/boot/dts/exynos4412-p4note.dtsi
@@ -641,19 +641,19 @@ &pinctrl_0 {
pinctrl-names = "default";
pinctrl-0 = <&sleep0>;
- tsp_reg_gpio_2: tsp-reg-gpio-2 {
+ tsp_reg_gpio_2: tsp-reg-gpio-2-pins {
samsung,pins = "gpb-5";
samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
};
- tsp_reg_gpio_3: tsp-reg-gpio-3 {
+ tsp_reg_gpio_3: tsp-reg-gpio-3-pins {
samsung,pins = "gpb-7";
samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
};
- sleep0: sleep-states {
+ sleep0: sleep-state {
PIN_SLP(gpa0-0, INPUT, NONE);
PIN_SLP(gpa0-1, OUT0, NONE);
PIN_SLP(gpa0-2, INPUT, NONE);
@@ -755,19 +755,19 @@ &pinctrl_1 {
pinctrl-names = "default";
pinctrl-0 = <&sleep1>;
- sd3_wifi: sd3-wifi {
+ sd3_wifi: sd3-wifi-pins {
samsung,pins = "gpk3-3", "gpk3-4", "gpk3-5", "gpk3-6";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
};
- bt_shutdown: bt-shutdown {
+ bt_shutdown: bt-shutdown-pins {
samsung,pins = "gpl0-6";
samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
};
- uart_sel: uart-sel {
+ uart_sel: uart-sel-pins {
samsung,pins = "gpl2-7";
samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
@@ -775,82 +775,82 @@ uart_sel: uart-sel {
/* 0 = CP, 1 = AP (serial output) */
};
- tsp_rst: tsp-rst {
+ tsp_rst: tsp-rst-pins {
samsung,pins = "gpm0-4";
samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
};
- tsp_irq: tsp-irq {
+ tsp_irq: tsp-irq-pins {
samsung,pins = "gpm2-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
};
- wifi_reset: wifi-reset {
+ wifi_reset: wifi-reset-pins {
samsung,pins = "gpm3-5";
samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
};
- tsp_reg_gpio_1: tsp-reg-gpio-1 {
+ tsp_reg_gpio_1: tsp-reg-gpio-1-pins {
samsung,pins = "gpm4-5";
samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
};
- ak8975_irq: ak8975-irq {
+ ak8975_irq: ak8975-irq-pins {
samsung,pins = "gpm4-7";
samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
};
- stmpe_adc_irq: stmpe-adc-irq {
+ stmpe_adc_irq: stmpe-adc-irq-pins {
samsung,pins = "gpx0-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
};
- max77686_irq: max77686-irq {
+ max77686_irq: max77686-irq-pins {
samsung,pins = "gpx0-7";
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
};
- gpio_keys: gpio-keys {
+ gpio_keys: gpio-keys-pins {
samsung,pins = "gpx2-2", "gpx2-7", "gpx3-3";
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
};
- fuel_alert_irq: fuel-alert-irq {
+ fuel_alert_irq: fuel-alert-irq-pins {
samsung,pins = "gpx2-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
};
- wifi_host_wake: wifi-host-wake {
+ wifi_host_wake: wifi-host-wake-pins {
samsung,pins = "gpx2-5";
samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
};
- bt_host_wakeup: bt-host-wakeup {
+ bt_host_wakeup: bt-host-wakeup-pins {
samsung,pins = "gpx2-6";
samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
};
- bt_device_wakeup: bt-device-wakeup {
+ bt_device_wakeup: bt-device-wakeup-pins {
samsung,pins = "gpx3-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
};
- sdhci2_cd: sdhci2-cd {
+ sdhci2_cd: sdhci2-cd-pins {
samsung,pins = "gpx3-4";
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
};
- sleep1: sleep-states {
+ sleep1: sleep-state {
PIN_SLP(gpk0-0, PREV, NONE);
PIN_SLP(gpk0-1, PREV, NONE);
PIN_SLP(gpk0-2, PREV, NONE);
@@ -1004,7 +1004,7 @@ &pinctrl_2 {
pinctrl-names = "default";
pinctrl-0 = <&sleep2>;
- sleep2: sleep-states {
+ sleep2: sleep-state {
PIN_SLP(gpz-0, INPUT, DOWN);
PIN_SLP(gpz-1, INPUT, DOWN);
PIN_SLP(gpz-2, INPUT, DOWN);
@@ -1019,7 +1019,7 @@ &pinctrl_3 {
pinctrl-names = "default";
pinctrl-0 = <&sleep3>;
- sleep3: sleep-states {
+ sleep3: sleep-state {
PIN_SLP(gpv0-0, INPUT, DOWN);
PIN_SLP(gpv0-1, INPUT, DOWN);
PIN_SLP(gpv0-2, INPUT, DOWN);
diff --git a/arch/arm/boot/dts/exynos4412-pinctrl.dtsi b/arch/arm/boot/dts/exynos4412-pinctrl.dtsi
index d7d5fdc230d8..88b8afd55664 100644
--- a/arch/arm/boot/dts/exynos4412-pinctrl.dtsi
+++ b/arch/arm/boot/dts/exynos4412-pinctrl.dtsi
@@ -19,7 +19,7 @@ _pin { \
}
&pinctrl_0 {
- gpa0: gpa0 {
+ gpa0: gpa0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -27,7 +27,7 @@ gpa0: gpa0 {
#interrupt-cells = <2>;
};
- gpa1: gpa1 {
+ gpa1: gpa1-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -35,7 +35,7 @@ gpa1: gpa1 {
#interrupt-cells = <2>;
};
- gpb: gpb {
+ gpb: gpb-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -43,7 +43,7 @@ gpb: gpb {
#interrupt-cells = <2>;
};
- gpc0: gpc0 {
+ gpc0: gpc0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -51,7 +51,7 @@ gpc0: gpc0 {
#interrupt-cells = <2>;
};
- gpc1: gpc1 {
+ gpc1: gpc1-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -59,7 +59,7 @@ gpc1: gpc1 {
#interrupt-cells = <2>;
};
- gpd0: gpd0 {
+ gpd0: gpd0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -67,7 +67,7 @@ gpd0: gpd0 {
#interrupt-cells = <2>;
};
- gpd1: gpd1 {
+ gpd1: gpd1-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -75,7 +75,7 @@ gpd1: gpd1 {
#interrupt-cells = <2>;
};
- gpf0: gpf0 {
+ gpf0: gpf0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -83,7 +83,7 @@ gpf0: gpf0 {
#interrupt-cells = <2>;
};
- gpf1: gpf1 {
+ gpf1: gpf1-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -91,7 +91,7 @@ gpf1: gpf1 {
#interrupt-cells = <2>;
};
- gpf2: gpf2 {
+ gpf2: gpf2-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -99,7 +99,7 @@ gpf2: gpf2 {
#interrupt-cells = <2>;
};
- gpf3: gpf3 {
+ gpf3: gpf3-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -107,7 +107,7 @@ gpf3: gpf3 {
#interrupt-cells = <2>;
};
- gpj0: gpj0 {
+ gpj0: gpj0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -115,7 +115,7 @@ gpj0: gpj0 {
#interrupt-cells = <2>;
};
- gpj1: gpj1 {
+ gpj1: gpj1-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -123,112 +123,112 @@ gpj1: gpj1 {
#interrupt-cells = <2>;
};
- uart0_data: uart0-data {
+ uart0_data: uart0-data-pins {
samsung,pins = "gpa0-0", "gpa0-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- uart0_fctl: uart0-fctl {
+ uart0_fctl: uart0-fctl-pins {
samsung,pins = "gpa0-2", "gpa0-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- uart1_data: uart1-data {
+ uart1_data: uart1-data-pins {
samsung,pins = "gpa0-4", "gpa0-5";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- uart1_fctl: uart1-fctl {
+ uart1_fctl: uart1-fctl-pins {
samsung,pins = "gpa0-6", "gpa0-7";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- i2c2_bus: i2c2-bus {
+ i2c2_bus: i2c2-bus-pins {
samsung,pins = "gpa0-6", "gpa0-7";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- uart2_data: uart2-data {
+ uart2_data: uart2-data-pins {
samsung,pins = "gpa1-0", "gpa1-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- uart2_fctl: uart2-fctl {
+ uart2_fctl: uart2-fctl-pins {
samsung,pins = "gpa1-2", "gpa1-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- uart_audio_a: uart-audio-a {
+ uart_audio_a: uart-audio-a-pins {
samsung,pins = "gpa1-0", "gpa1-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- i2c3_bus: i2c3-bus {
+ i2c3_bus: i2c3-bus-pins {
samsung,pins = "gpa1-2", "gpa1-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- uart3_data: uart3-data {
+ uart3_data: uart3-data-pins {
samsung,pins = "gpa1-4", "gpa1-5";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- uart_audio_b: uart-audio-b {
+ uart_audio_b: uart-audio-b-pins {
samsung,pins = "gpa1-4", "gpa1-5";
samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- spi0_bus: spi0-bus {
+ spi0_bus: spi0-bus-pins {
samsung,pins = "gpb-0", "gpb-2", "gpb-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- i2c4_bus: i2c4-bus {
+ i2c4_bus: i2c4-bus-pins {
samsung,pins = "gpb-0", "gpb-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- spi1_bus: spi1-bus {
+ spi1_bus: spi1-bus-pins {
samsung,pins = "gpb-4", "gpb-6", "gpb-7";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- i2c5_bus: i2c5-bus {
+ i2c5_bus: i2c5-bus-pins {
samsung,pins = "gpb-2", "gpb-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- i2s1_bus: i2s1-bus {
+ i2s1_bus: i2s1-bus-pins {
samsung,pins = "gpc0-0", "gpc0-1", "gpc0-2", "gpc0-3",
"gpc0-4";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
@@ -236,7 +236,7 @@ i2s1_bus: i2s1-bus {
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- pcm1_bus: pcm1-bus {
+ pcm1_bus: pcm1-bus-pins {
samsung,pins = "gpc0-0", "gpc0-1", "gpc0-2", "gpc0-3",
"gpc0-4";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
@@ -244,7 +244,7 @@ pcm1_bus: pcm1-bus {
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- ac97_bus: ac97-bus {
+ ac97_bus: ac97-bus-pins {
samsung,pins = "gpc0-0", "gpc0-1", "gpc0-2", "gpc0-3",
"gpc0-4";
samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
@@ -252,7 +252,7 @@ ac97_bus: ac97-bus {
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- i2s2_bus: i2s2-bus {
+ i2s2_bus: i2s2-bus-pins {
samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3",
"gpc1-4";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
@@ -260,7 +260,7 @@ i2s2_bus: i2s2-bus {
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- pcm2_bus: pcm2-bus {
+ pcm2_bus: pcm2-bus-pins {
samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3",
"gpc1-4";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
@@ -268,105 +268,105 @@ pcm2_bus: pcm2-bus {
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- spdif_bus: spdif-bus {
+ spdif_bus: spdif-bus-pins {
samsung,pins = "gpc1-0", "gpc1-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- i2c6_bus: i2c6-bus {
+ i2c6_bus: i2c6-bus-pins {
samsung,pins = "gpc1-3", "gpc1-4";
samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- spi2_bus: spi2-bus {
+ spi2_bus: spi2-bus-pins {
samsung,pins = "gpc1-1", "gpc1-3", "gpc1-4";
samsung,pin-function = <EXYNOS_PIN_FUNC_5>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- pwm0_out: pwm0-out {
+ pwm0_out: pwm0-out-pins {
samsung,pins = "gpd0-0";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- pwm1_out: pwm1-out {
+ pwm1_out: pwm1-out-pins {
samsung,pins = "gpd0-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- lcd_ctrl: lcd-ctrl {
+ lcd_ctrl: lcd-ctrl-pins {
samsung,pins = "gpd0-0", "gpd0-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- i2c7_bus: i2c7-bus {
+ i2c7_bus: i2c7-bus-pins {
samsung,pins = "gpd0-2", "gpd0-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- pwm2_out: pwm2-out {
+ pwm2_out: pwm2-out-pins {
samsung,pins = "gpd0-2";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- pwm3_out: pwm3-out {
+ pwm3_out: pwm3-out-pins {
samsung,pins = "gpd0-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- i2c0_bus: i2c0-bus {
+ i2c0_bus: i2c0-bus-pins {
samsung,pins = "gpd1-0", "gpd1-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- mipi0_clk: mipi0-clk {
+ mipi0_clk: mipi0-clk-pins {
samsung,pins = "gpd1-0", "gpd1-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- i2c1_bus: i2c1-bus {
+ i2c1_bus: i2c1-bus-pins {
samsung,pins = "gpd1-2", "gpd1-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- mipi1_clk: mipi1-clk {
+ mipi1_clk: mipi1-clk-pins {
samsung,pins = "gpd1-2", "gpd1-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- lcd_clk: lcd-clk {
+ lcd_clk: lcd-clk-pins {
samsung,pins = "gpf0-0", "gpf0-1", "gpf0-2", "gpf0-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- lcd_data16: lcd-data-width16 {
+ lcd_data16: lcd-data-width16-pins {
samsung,pins = "gpf0-7", "gpf1-0", "gpf1-1", "gpf1-2",
"gpf1-3", "gpf1-6", "gpf1-7", "gpf2-0",
"gpf2-1", "gpf2-2", "gpf2-3", "gpf2-7",
@@ -376,7 +376,7 @@ lcd_data16: lcd-data-width16 {
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- lcd_data18: lcd-data-width18 {
+ lcd_data18: lcd-data-width18-pins {
samsung,pins = "gpf0-6", "gpf0-7", "gpf1-0", "gpf1-1",
"gpf1-2", "gpf1-3", "gpf1-6", "gpf1-7",
"gpf2-0", "gpf2-1", "gpf2-2", "gpf2-3",
@@ -387,7 +387,7 @@ lcd_data18: lcd-data-width18 {
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- lcd_data24: lcd-data-width24 {
+ lcd_data24: lcd-data-width24-pins {
samsung,pins = "gpf0-4", "gpf0-5", "gpf0-6", "gpf0-7",
"gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3",
"gpf1-4", "gpf1-5", "gpf1-6", "gpf1-7",
@@ -399,14 +399,14 @@ lcd_data24: lcd-data-width24 {
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- lcd_ldi: lcd-ldi {
+ lcd_ldi: lcd-ldi-pins {
samsung,pins = "gpf3-4";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- cam_port_a_io: cam-port-a-io {
+ cam_port_a_io: cam-port-a-io-pins {
samsung,pins = "gpj0-0", "gpj0-1", "gpj0-2", "gpj0-3",
"gpj0-4", "gpj0-5", "gpj0-6", "gpj0-7",
"gpj1-0", "gpj1-1", "gpj1-2", "gpj1-4";
@@ -415,14 +415,14 @@ cam_port_a_io: cam-port-a-io {
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- cam_port_a_clk_active: cam-port-a-clk-active {
+ cam_port_a_clk_active: cam-port-a-clk-active-pins {
samsung,pins = "gpj1-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
- cam_port_a_clk_idle: cam-port-a-clk-idle {
+ cam_port_a_clk_idle: cam-port-a-clk-idle-pins {
samsung,pins = "gpj1-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
@@ -431,7 +431,7 @@ cam_port_a_clk_idle: cam-port-a-clk-idle {
};
&pinctrl_1 {
- gpk0: gpk0 {
+ gpk0: gpk0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -439,7 +439,7 @@ gpk0: gpk0 {
#interrupt-cells = <2>;
};
- gpk1: gpk1 {
+ gpk1: gpk1-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -447,7 +447,7 @@ gpk1: gpk1 {
#interrupt-cells = <2>;
};
- gpk2: gpk2 {
+ gpk2: gpk2-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -455,7 +455,7 @@ gpk2: gpk2 {
#interrupt-cells = <2>;
};
- gpk3: gpk3 {
+ gpk3: gpk3-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -463,7 +463,7 @@ gpk3: gpk3 {
#interrupt-cells = <2>;
};
- gpl0: gpl0 {
+ gpl0: gpl0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -471,7 +471,7 @@ gpl0: gpl0 {
#interrupt-cells = <2>;
};
- gpl1: gpl1 {
+ gpl1: gpl1-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -479,7 +479,7 @@ gpl1: gpl1 {
#interrupt-cells = <2>;
};
- gpl2: gpl2 {
+ gpl2: gpl2-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -487,7 +487,7 @@ gpl2: gpl2 {
#interrupt-cells = <2>;
};
- gpm0: gpm0 {
+ gpm0: gpm0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -495,7 +495,7 @@ gpm0: gpm0 {
#interrupt-cells = <2>;
};
- gpm1: gpm1 {
+ gpm1: gpm1-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -503,7 +503,7 @@ gpm1: gpm1 {
#interrupt-cells = <2>;
};
- gpm2: gpm2 {
+ gpm2: gpm2-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -511,7 +511,7 @@ gpm2: gpm2 {
#interrupt-cells = <2>;
};
- gpm3: gpm3 {
+ gpm3: gpm3-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -519,7 +519,7 @@ gpm3: gpm3 {
#interrupt-cells = <2>;
};
- gpm4: gpm4 {
+ gpm4: gpm4-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -527,42 +527,42 @@ gpm4: gpm4 {
#interrupt-cells = <2>;
};
- gpy0: gpy0 {
+ gpy0: gpy0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
};
- gpy1: gpy1 {
+ gpy1: gpy1-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
};
- gpy2: gpy2 {
+ gpy2: gpy2-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
};
- gpy3: gpy3 {
+ gpy3: gpy3-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
};
- gpy4: gpy4 {
+ gpy4: gpy4-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
};
- gpy5: gpy5 {
+ gpy5: gpy5-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
};
- gpy6: gpy6 {
+ gpy6: gpy6-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
};
- gpx0: gpx0 {
+ gpx0: gpx0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -579,7 +579,7 @@ gpx0: gpx0 {
#interrupt-cells = <2>;
};
- gpx1: gpx1 {
+ gpx1: gpx1-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -596,7 +596,7 @@ gpx1: gpx1 {
#interrupt-cells = <2>;
};
- gpx2: gpx2 {
+ gpx2: gpx2-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -604,7 +604,7 @@ gpx2: gpx2 {
#interrupt-cells = <2>;
};
- gpx3: gpx3 {
+ gpx3: gpx3-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -612,203 +612,203 @@ gpx3: gpx3 {
#interrupt-cells = <2>;
};
- sd0_clk: sd0-clk {
+ sd0_clk: sd0-clk-pins {
samsung,pins = "gpk0-0";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
- sd0_cmd: sd0-cmd {
+ sd0_cmd: sd0-cmd-pins {
samsung,pins = "gpk0-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
- sd0_cd: sd0-cd {
+ sd0_cd: sd0-cd-pins {
samsung,pins = "gpk0-2";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
- sd0_bus1: sd0-bus-width1 {
+ sd0_bus1: sd0-bus-width1-pins {
samsung,pins = "gpk0-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
- sd0_bus4: sd0-bus-width4 {
+ sd0_bus4: sd0-bus-width4-pins {
samsung,pins = "gpk0-3", "gpk0-4", "gpk0-5", "gpk0-6";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
- sd0_bus8: sd0-bus-width8 {
+ sd0_bus8: sd0-bus-width8-pins {
samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
- sd4_clk: sd4-clk {
+ sd4_clk: sd4-clk-pins {
samsung,pins = "gpk0-0";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
- sd4_cmd: sd4-cmd {
+ sd4_cmd: sd4-cmd-pins {
samsung,pins = "gpk0-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
- sd4_cd: sd4-cd {
+ sd4_cd: sd4-cd-pins {
samsung,pins = "gpk0-2";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
- sd4_bus1: sd4-bus-width1 {
+ sd4_bus1: sd4-bus-width1-pins {
samsung,pins = "gpk0-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
- sd4_bus4: sd4-bus-width4 {
+ sd4_bus4: sd4-bus-width4-pins {
samsung,pins = "gpk0-3", "gpk0-4", "gpk0-5", "gpk0-6";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
- sd4_bus8: sd4-bus-width8 {
+ sd4_bus8: sd4-bus-width8-pins {
samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6";
samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
- sd1_clk: sd1-clk {
+ sd1_clk: sd1-clk-pins {
samsung,pins = "gpk1-0";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
- sd1_cmd: sd1-cmd {
+ sd1_cmd: sd1-cmd-pins {
samsung,pins = "gpk1-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
- sd1_cd: sd1-cd {
+ sd1_cd: sd1-cd-pins {
samsung,pins = "gpk1-2";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
- sd1_bus1: sd1-bus-width1 {
+ sd1_bus1: sd1-bus-width1-pins {
samsung,pins = "gpk1-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
- sd1_bus4: sd1-bus-width4 {
+ sd1_bus4: sd1-bus-width4-pins {
samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
- sd2_clk: sd2-clk {
+ sd2_clk: sd2-clk-pins {
samsung,pins = "gpk2-0";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
- sd2_cmd: sd2-cmd {
+ sd2_cmd: sd2-cmd-pins {
samsung,pins = "gpk2-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
- sd2_cd: sd2-cd {
+ sd2_cd: sd2-cd-pins {
samsung,pins = "gpk2-2";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
- sd2_bus1: sd2-bus-width1 {
+ sd2_bus1: sd2-bus-width1-pins {
samsung,pins = "gpk2-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
- sd2_bus4: sd2-bus-width4 {
+ sd2_bus4: sd2-bus-width4-pins {
samsung,pins = "gpk2-3", "gpk2-4", "gpk2-5", "gpk2-6";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
- sd2_bus8: sd2-bus-width8 {
+ sd2_bus8: sd2-bus-width8-pins {
samsung,pins = "gpk3-3", "gpk3-4", "gpk3-5", "gpk3-6";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
- sd3_clk: sd3-clk {
+ sd3_clk: sd3-clk-pins {
samsung,pins = "gpk3-0";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
- sd3_cmd: sd3-cmd {
+ sd3_cmd: sd3-cmd-pins {
samsung,pins = "gpk3-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
- sd3_cd: sd3-cd {
+ sd3_cd: sd3-cd-pins {
samsung,pins = "gpk3-2";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
- sd3_bus1: sd3-bus-width1 {
+ sd3_bus1: sd3-bus-width1-pins {
samsung,pins = "gpk3-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
- sd3_bus4: sd3-bus-width4 {
+ sd3_bus4: sd3-bus-width4-pins {
samsung,pins = "gpk3-3", "gpk3-4", "gpk3-5", "gpk3-6";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
- cam_port_b_io: cam-port-b-io {
+ cam_port_b_io: cam-port-b-io-pins {
samsung,pins = "gpm0-0", "gpm0-1", "gpm0-2", "gpm0-3",
"gpm0-4", "gpm0-5", "gpm0-6", "gpm0-7",
"gpm1-0", "gpm1-1", "gpm2-0", "gpm2-1";
@@ -817,77 +817,77 @@ cam_port_b_io: cam-port-b-io {
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- cam_port_b_clk_active: cam-port-b-clk-active {
+ cam_port_b_clk_active: cam-port-b-clk-active-pins {
samsung,pins = "gpm2-2";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
- cam_port_b_clk_idle: cam-port-b-clk-idle {
+ cam_port_b_clk_idle: cam-port-b-clk-idle-pins {
samsung,pins = "gpm2-2";
samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- eint0: ext-int0 {
+ eint0: ext-int0-pins {
samsung,pins = "gpx0-0";
samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- eint8: ext-int8 {
+ eint8: ext-int8-pins {
samsung,pins = "gpx1-0";
samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- eint15: ext-int15 {
+ eint15: ext-int15-pins {
samsung,pins = "gpx1-7";
samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- eint16: ext-int16 {
+ eint16: ext-int16-pins {
samsung,pins = "gpx2-0";
samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- eint31: ext-int31 {
+ eint31: ext-int31-pins {
samsung,pins = "gpx3-7";
samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- fimc_is_i2c0: fimc-is-i2c0 {
+ fimc_is_i2c0: fimc-is-i2c0-pins {
samsung,pins = "gpm4-0", "gpm4-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- fimc_is_i2c1: fimc-is-i2c1 {
+ fimc_is_i2c1: fimc-is-i2c1-pins {
samsung,pins = "gpm4-2", "gpm4-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- fimc_is_uart: fimc-is-uart {
+ fimc_is_uart: fimc-is-uart-pins {
samsung,pins = "gpm3-5", "gpm3-7";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- hdmi_cec: hdmi-cec {
+ hdmi_cec: hdmi-cec-pins {
samsung,pins = "gpx3-6";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
@@ -896,7 +896,7 @@ hdmi_cec: hdmi-cec {
};
&pinctrl_2 {
- gpz: gpz {
+ gpz: gpz-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -904,7 +904,7 @@ gpz: gpz {
#interrupt-cells = <2>;
};
- i2s0_bus: i2s0-bus {
+ i2s0_bus: i2s0-bus-pins {
samsung,pins = "gpz-0", "gpz-1", "gpz-2", "gpz-3",
"gpz-4", "gpz-5", "gpz-6";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
@@ -912,7 +912,7 @@ i2s0_bus: i2s0-bus {
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- pcm0_bus: pcm0-bus {
+ pcm0_bus: pcm0-bus-pins {
samsung,pins = "gpz-0", "gpz-1", "gpz-2", "gpz-3",
"gpz-4";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
@@ -922,7 +922,7 @@ pcm0_bus: pcm0-bus {
};
&pinctrl_3 {
- gpv0: gpv0 {
+ gpv0: gpv0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -930,7 +930,7 @@ gpv0: gpv0 {
#interrupt-cells = <2>;
};
- gpv1: gpv1 {
+ gpv1: gpv1-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -938,7 +938,7 @@ gpv1: gpv1 {
#interrupt-cells = <2>;
};
- gpv2: gpv2 {
+ gpv2: gpv2-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -946,7 +946,7 @@ gpv2: gpv2 {
#interrupt-cells = <2>;
};
- gpv3: gpv3 {
+ gpv3: gpv3-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -954,7 +954,7 @@ gpv3: gpv3 {
#interrupt-cells = <2>;
};
- gpv4: gpv4 {
+ gpv4: gpv4-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -962,7 +962,7 @@ gpv4: gpv4 {
#interrupt-cells = <2>;
};
- c2c_bus: c2c-bus {
+ c2c_bus: c2c-bus-pins {
samsung,pins = "gpv0-0", "gpv0-1", "gpv0-2", "gpv0-3",
"gpv0-4", "gpv0-5", "gpv0-6", "gpv0-7",
"gpv1-0", "gpv1-1", "gpv1-2", "gpv1-3",
diff --git a/arch/arm/boot/dts/exynos4412-smdk4412.dts b/arch/arm/boot/dts/exynos4412-smdk4412.dts
index cc99b955af0c..a40ff394977c 100644
--- a/arch/arm/boot/dts/exynos4412-smdk4412.dts
+++ b/arch/arm/boot/dts/exynos4412-smdk4412.dts
@@ -133,14 +133,14 @@ key-E {
};
&pinctrl_1 {
- keypad_rows: keypad-rows {
+ keypad_rows: keypad-rows-pins {
samsung,pins = "gpx2-0", "gpx2-1", "gpx2-2";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- keypad_cols: keypad-cols {
+ keypad_cols: keypad-cols-pins {
samsung,pins = "gpx1-0", "gpx1-1", "gpx1-2", "gpx1-3",
"gpx1-4", "gpx1-5", "gpx1-6", "gpx1-7";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
--
2.32.0
Align the pin controller related nodes with dtschema. No functional
change expected.
Signed-off-by: Krzysztof Kozlowski <[email protected]>
---
arch/arm/boot/dts/exynos5260-pinctrl.dtsi | 148 ++++++++++-----------
arch/arm/boot/dts/exynos5260-xyref5260.dts | 2 +-
2 files changed, 75 insertions(+), 75 deletions(-)
diff --git a/arch/arm/boot/dts/exynos5260-pinctrl.dtsi b/arch/arm/boot/dts/exynos5260-pinctrl.dtsi
index 17e2f3e0d71e..150607f8103d 100644
--- a/arch/arm/boot/dts/exynos5260-pinctrl.dtsi
+++ b/arch/arm/boot/dts/exynos5260-pinctrl.dtsi
@@ -12,7 +12,7 @@
#include <dt-bindings/pinctrl/samsung.h>
&pinctrl_0 {
- gpa0: gpa0 {
+ gpa0: gpa0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -20,7 +20,7 @@ gpa0: gpa0 {
#interrupt-cells = <2>;
};
- gpa1: gpa1 {
+ gpa1: gpa1-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -28,7 +28,7 @@ gpa1: gpa1 {
#interrupt-cells = <2>;
};
- gpa2: gpa2 {
+ gpa2: gpa2-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -36,7 +36,7 @@ gpa2: gpa2 {
#interrupt-cells = <2>;
};
- gpb0: gpb0 {
+ gpb0: gpb0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -44,7 +44,7 @@ gpb0: gpb0 {
#interrupt-cells = <2>;
};
- gpb1: gpb1 {
+ gpb1: gpb1-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -52,7 +52,7 @@ gpb1: gpb1 {
#interrupt-cells = <2>;
};
- gpb2: gpb2 {
+ gpb2: gpb2-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -60,7 +60,7 @@ gpb2: gpb2 {
#interrupt-cells = <2>;
};
- gpb3: gpb3 {
+ gpb3: gpb3-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -68,7 +68,7 @@ gpb3: gpb3 {
#interrupt-cells = <2>;
};
- gpb4: gpb4 {
+ gpb4: gpb4-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -76,7 +76,7 @@ gpb4: gpb4 {
#interrupt-cells = <2>;
};
- gpb5: gpb5 {
+ gpb5: gpb5-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -84,7 +84,7 @@ gpb5: gpb5 {
#interrupt-cells = <2>;
};
- gpd0: gpd0 {
+ gpd0: gpd0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -92,7 +92,7 @@ gpd0: gpd0 {
#interrupt-cells = <2>;
};
- gpd1: gpd1 {
+ gpd1: gpd1-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -100,7 +100,7 @@ gpd1: gpd1 {
#interrupt-cells = <2>;
};
- gpd2: gpd2 {
+ gpd2: gpd2-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -108,7 +108,7 @@ gpd2: gpd2 {
#interrupt-cells = <2>;
};
- gpe0: gpe0 {
+ gpe0: gpe0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -116,7 +116,7 @@ gpe0: gpe0 {
#interrupt-cells = <2>;
};
- gpe1: gpe1 {
+ gpe1: gpe1-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -124,7 +124,7 @@ gpe1: gpe1 {
#interrupt-cells = <2>;
};
- gpf0: gpf0 {
+ gpf0: gpf0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -132,7 +132,7 @@ gpf0: gpf0 {
#interrupt-cells = <2>;
};
- gpf1: gpf1 {
+ gpf1: gpf1-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -140,7 +140,7 @@ gpf1: gpf1 {
#interrupt-cells = <2>;
};
- gpk0: gpk0 {
+ gpk0: gpk0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -148,7 +148,7 @@ gpk0: gpk0 {
#interrupt-cells = <2>;
};
- gpx0: gpx0 {
+ gpx0: gpx0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -164,7 +164,7 @@ gpx0: gpx0 {
#interrupt-cells = <2>;
};
- gpx1: gpx1 {
+ gpx1: gpx1-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -180,7 +180,7 @@ gpx1: gpx1 {
#interrupt-cells = <2>;
};
- gpx2: gpx2 {
+ gpx2: gpx2-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -188,7 +188,7 @@ gpx2: gpx2 {
#interrupt-cells = <2>;
};
- gpx3: gpx3 {
+ gpx3: gpx3-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -196,63 +196,63 @@ gpx3: gpx3 {
#interrupt-cells = <2>;
};
- uart0_data: uart0-data {
+ uart0_data: uart0-data-pins {
samsung,pins = "gpa0-0", "gpa0-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
};
- uart0_fctl: uart0-fctl {
+ uart0_fctl: uart0-fctl-pins {
samsung,pins = "gpa0-2", "gpa0-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
};
- uart1_data: uart1-data {
+ uart1_data: uart1-data-pins {
samsung,pins = "gpa1-0", "gpa1-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
};
- uart1_fctl: uart1-fctl {
+ uart1_fctl: uart1-fctl-pins {
samsung,pins = "gpa1-2", "gpa1-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
};
- uart2_data: uart2-data {
+ uart2_data: uart2-data-pins {
samsung,pins = "gpa1-4", "gpa1-5";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
};
- spi0_bus: spi0-bus {
+ spi0_bus: spi0-bus-pins {
samsung,pins = "gpa2-0", "gpa2-2", "gpa2-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
};
- spi1_bus: spi1-bus {
+ spi1_bus: spi1-bus-pins {
samsung,pins = "gpa2-4", "gpa2-6", "gpa2-7";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
};
- usb3_vbus0_en: usb3-vbus0-en {
+ usb3_vbus0_en: usb3-vbus0-en-pins {
samsung,pins = "gpa2-4";
samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
};
- i2s1_bus: i2s1-bus {
+ i2s1_bus: i2s1-bus-pins {
samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2", "gpb0-3",
"gpb0-4";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
@@ -260,7 +260,7 @@ i2s1_bus: i2s1-bus {
samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
};
- pcm1_bus: pcm1-bus {
+ pcm1_bus: pcm1-bus-pins {
samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2", "gpb0-3",
"gpb0-4";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
@@ -268,105 +268,105 @@ pcm1_bus: pcm1-bus {
samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
};
- spdif1_bus: spdif1-bus {
+ spdif1_bus: spdif1-bus-pins {
samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2";
samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
};
- spi2_bus: spi2-bus {
+ spi2_bus: spi2-bus-pins {
samsung,pins = "gpb1-0", "gpb1-2", "gpb1-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
};
- i2c0_hs_bus: i2c0-hs-bus {
+ i2c0_hs_bus: i2c0-hs-bus-pins {
samsung,pins = "gpb3-0", "gpb3-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
};
- i2c1_hs_bus: i2c1-hs-bus {
+ i2c1_hs_bus: i2c1-hs-bus-pins {
samsung,pins = "gpb3-2", "gpb3-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
};
- i2c2_hs_bus: i2c2-hs-bus {
+ i2c2_hs_bus: i2c2-hs-bus-pins {
samsung,pins = "gpb3-4", "gpb3-5";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
};
- i2c3_hs_bus: i2c3-hs-bus {
+ i2c3_hs_bus: i2c3-hs-bus-pins {
samsung,pins = "gpb3-6", "gpb3-7";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
};
- i2c4_bus: i2c4-bus {
+ i2c4_bus: i2c4-bus-pins {
samsung,pins = "gpb4-0", "gpb4-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
};
- i2c5_bus: i2c5-bus {
+ i2c5_bus: i2c5-bus-pins {
samsung,pins = "gpb4-2", "gpb4-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
};
- i2c6_bus: i2c6-bus {
+ i2c6_bus: i2c6-bus-pins {
samsung,pins = "gpb4-4", "gpb4-5";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
};
- i2c7_bus: i2c7-bus {
+ i2c7_bus: i2c7-bus-pins {
samsung,pins = "gpb4-6", "gpb4-7";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
};
- i2c8_bus: i2c8-bus {
+ i2c8_bus: i2c8-bus-pins {
samsung,pins = "gpb5-0", "gpb5-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
};
- i2c9_bus: i2c9-bus {
+ i2c9_bus: i2c9-bus-pins {
samsung,pins = "gpb5-2", "gpb5-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
};
- i2c10_bus: i2c10-bus {
+ i2c10_bus: i2c10-bus-pins {
samsung,pins = "gpb5-4", "gpb5-5";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
};
- i2c11_bus: i2c11-bus {
+ i2c11_bus: i2c11-bus-pins {
samsung,pins = "gpb5-6", "gpb5-7";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
};
- cam_gpio_a: cam-gpio-a {
+ cam_gpio_a: cam-gpio-a-pins {
samsung,pins = "gpe0-0", "gpe0-1", "gpe0-2", "gpe0-3",
"gpe0-4", "gpe0-5", "gpe0-6", "gpe0-7",
"gpe1-0", "gpe1-1";
@@ -375,7 +375,7 @@ cam_gpio_a: cam-gpio-a {
samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
};
- cam_gpio_b: cam-gpio-b {
+ cam_gpio_b: cam-gpio-b-pins {
samsung,pins = "gpf0-0", "gpf0-1", "gpf0-2", "gpf0-3",
"gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
@@ -383,28 +383,28 @@ cam_gpio_b: cam-gpio-b {
samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
};
- cam_i2c1_bus: cam-i2c1-bus {
+ cam_i2c1_bus: cam-i2c1-bus-pins {
samsung,pins = "gpf0-2", "gpf0-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
};
- cam_i2c0_bus: cam-i2c0-bus {
+ cam_i2c0_bus: cam-i2c0-bus-pins {
samsung,pins = "gpf0-0", "gpf0-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
};
- cam_spi0_bus: cam-spi0-bus {
+ cam_spi0_bus: cam-spi0-bus-pins {
samsung,pins = "gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
};
- cam_spi1_bus: cam-spi1-bus {
+ cam_spi1_bus: cam-spi1-bus-pins {
samsung,pins = "gpf1-4", "gpf1-5", "gpf1-6", "gpf1-7";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
@@ -413,7 +413,7 @@ cam_spi1_bus: cam-spi1-bus {
};
&pinctrl_1 {
- gpc0: gpc0 {
+ gpc0: gpc0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -421,7 +421,7 @@ gpc0: gpc0 {
#interrupt-cells = <2>;
};
- gpc1: gpc1 {
+ gpc1: gpc1-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -429,7 +429,7 @@ gpc1: gpc1 {
#interrupt-cells = <2>;
};
- gpc2: gpc2 {
+ gpc2: gpc2-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -437,7 +437,7 @@ gpc2: gpc2 {
#interrupt-cells = <2>;
};
- gpc3: gpc3 {
+ gpc3: gpc3-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -445,7 +445,7 @@ gpc3: gpc3 {
#interrupt-cells = <2>;
};
- gpc4: gpc4 {
+ gpc4: gpc4-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -453,112 +453,112 @@ gpc4: gpc4 {
#interrupt-cells = <2>;
};
- sd0_clk: sd0-clk {
+ sd0_clk: sd0-clk-pins {
samsung,pins = "gpc0-0";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV6>;
};
- sd0_cmd: sd0-cmd {
+ sd0_cmd: sd0-cmd-pins {
samsung,pins = "gpc0-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV6>;
};
- sd0_bus1: sd0-bus-width1 {
+ sd0_bus1: sd0-bus-width1-pins {
samsung,pins = "gpc0-2";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV6>;
};
- sd0_bus4: sd0-bus-width4 {
+ sd0_bus4: sd0-bus-width4-pins {
samsung,pins = "gpc0-3", "gpc0-4", "gpc0-5";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV6>;
};
- sd0_bus8: sd0-bus-width8 {
+ sd0_bus8: sd0-bus-width8-pins {
samsung,pins = "gpc3-0", "gpc3-1", "gpc3-2", "gpc3-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV6>;
};
- sd0_rdqs: sd0-rdqs {
+ sd0_rdqs: sd0-rdqs-pins {
samsung,pins = "gpc0-6";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV6>;
};
- sd1_clk: sd1-clk {
+ sd1_clk: sd1-clk-pins {
samsung,pins = "gpc1-0";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV6>;
};
- sd1_cmd: sd1-cmd {
+ sd1_cmd: sd1-cmd-pins {
samsung,pins = "gpc1-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV6>;
};
- sd1_bus1: sd1-bus-width1 {
+ sd1_bus1: sd1-bus-width1-pins {
samsung,pins = "gpc1-2";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV6>;
};
- sd1_bus4: sd1-bus-width4 {
+ sd1_bus4: sd1-bus-width4-pins {
samsung,pins = "gpc1-3", "gpc1-4", "gpc1-5";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV6>;
};
- sd1_bus8: sd1-bus-width8 {
+ sd1_bus8: sd1-bus-width8-pins {
samsung,pins = "gpc4-0", "gpc4-1", "gpc4-2", "gpc4-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV6>;
};
- sd2_clk: sd2-clk {
+ sd2_clk: sd2-clk-pins {
samsung,pins = "gpc2-0";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV6>;
};
- sd2_cmd: sd2-cmd {
+ sd2_cmd: sd2-cmd-pins {
samsung,pins = "gpc2-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV6>;
};
- sd2_cd: sd2-cd {
+ sd2_cd: sd2-cd-pins {
samsung,pins = "gpc2-2";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV6>;
};
- sd2_bus1: sd2-bus-width1 {
+ sd2_bus1: sd2-bus-width1-pins {
samsung,pins = "gpc2-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV6>;
};
- sd2_bus4: sd2-bus-width4 {
+ sd2_bus4: sd2-bus-width4-pins {
samsung,pins = "gpc2-4", "gpc2-5", "gpc2-6";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
@@ -567,7 +567,7 @@ sd2_bus4: sd2-bus-width4 {
};
&pinctrl_2 {
- gpz0: gpz0 {
+ gpz0: gpz0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -575,7 +575,7 @@ gpz0: gpz0 {
#interrupt-cells = <2>;
};
- gpz1: gpz1 {
+ gpz1: gpz1-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
diff --git a/arch/arm/boot/dts/exynos5260-xyref5260.dts b/arch/arm/boot/dts/exynos5260-xyref5260.dts
index 0dc2ec16aa0a..82d8441c8908 100644
--- a/arch/arm/boot/dts/exynos5260-xyref5260.dts
+++ b/arch/arm/boot/dts/exynos5260-xyref5260.dts
@@ -38,7 +38,7 @@ xrtcxti: xrtcxti {
};
&pinctrl_0 {
- hdmi_hpd_irq: hdmi-hpd-irq {
+ hdmi_hpd_irq: hdmi-hpd-irq-pins {
samsung,pins = "gpx3-7";
samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
--
2.32.0
Align the pin controller related nodes with dtschema. No functional
change expected.
Signed-off-by: Krzysztof Kozlowski <[email protected]>
---
arch/arm/boot/dts/exynos5410-odroidxu.dts | 10 +-
arch/arm/boot/dts/exynos5410-pinctrl.dtsi | 170 +++++++++++-----------
arch/arm/boot/dts/exynos5410-smdk5410.dts | 4 +-
3 files changed, 92 insertions(+), 92 deletions(-)
diff --git a/arch/arm/boot/dts/exynos5410-odroidxu.dts b/arch/arm/boot/dts/exynos5410-odroidxu.dts
index 9f2200dd5b43..ca121859b124 100644
--- a/arch/arm/boot/dts/exynos5410-odroidxu.dts
+++ b/arch/arm/boot/dts/exynos5410-odroidxu.dts
@@ -547,14 +547,14 @@ &mmc_2 {
};
&pinctrl_0 {
- emmc_nrst_pin: emmc-nrst {
+ emmc_nrst_pin: emmc-nrst-pins {
samsung,pins = "gpd1-0";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
};
- sd2_wp: sd2-wp {
+ sd2_wp: sd2-wp-pins {
samsung,pins = "gpm5-0";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
/* Pin is floating so be sure to disable write-protect */
@@ -562,14 +562,14 @@ sd2_wp: sd2-wp {
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
};
- pmic_dvs_2: pmic-dvs-2 {
+ pmic_dvs_2: pmic-dvs-2-pins {
samsung,pins = "gpx0-0", "gpx0-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
};
- pmic_dvs_1: pmic-dvs-1 {
+ pmic_dvs_1: pmic-dvs-1-pins {
samsung,pins = "gpx0-2";
samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
@@ -577,7 +577,7 @@ pmic_dvs_1: pmic-dvs-1 {
samsung,pin-val = <1>;
};
- max77802_irq: max77802-irq {
+ max77802_irq: max77802-irq-pins {
samsung,pins = "gpx0-4";
samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
diff --git a/arch/arm/boot/dts/exynos5410-pinctrl.dtsi b/arch/arm/boot/dts/exynos5410-pinctrl.dtsi
index 9599ba8ba798..6c7814b4372e 100644
--- a/arch/arm/boot/dts/exynos5410-pinctrl.dtsi
+++ b/arch/arm/boot/dts/exynos5410-pinctrl.dtsi
@@ -9,7 +9,7 @@
#include <dt-bindings/pinctrl/samsung.h>
&pinctrl_0 {
- gpa0: gpa0 {
+ gpa0: gpa0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -17,7 +17,7 @@ gpa0: gpa0 {
#interrupt-cells = <2>;
};
- gpa1: gpa1 {
+ gpa1: gpa1-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -25,7 +25,7 @@ gpa1: gpa1 {
#interrupt-cells = <2>;
};
- gpa2: gpa2 {
+ gpa2: gpa2-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -33,7 +33,7 @@ gpa2: gpa2 {
#interrupt-cells = <2>;
};
- gpb0: gpb0 {
+ gpb0: gpb0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -41,7 +41,7 @@ gpb0: gpb0 {
#interrupt-cells = <2>;
};
- gpb1: gpb1 {
+ gpb1: gpb1-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -49,7 +49,7 @@ gpb1: gpb1 {
#interrupt-cells = <2>;
};
- gpb2: gpb2 {
+ gpb2: gpb2-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -57,7 +57,7 @@ gpb2: gpb2 {
#interrupt-cells = <2>;
};
- gpb3: gpb3 {
+ gpb3: gpb3-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -65,7 +65,7 @@ gpb3: gpb3 {
#interrupt-cells = <2>;
};
- gpc0: gpc0 {
+ gpc0: gpc0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -73,7 +73,7 @@ gpc0: gpc0 {
#interrupt-cells = <2>;
};
- gpc3: gpc3 {
+ gpc3: gpc3-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -81,7 +81,7 @@ gpc3: gpc3 {
#interrupt-cells = <2>;
};
- gpc1: gpc1 {
+ gpc1: gpc1-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -89,7 +89,7 @@ gpc1: gpc1 {
#interrupt-cells = <2>;
};
- gpc2: gpc2 {
+ gpc2: gpc2-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -97,12 +97,12 @@ gpc2: gpc2 {
#interrupt-cells = <2>;
};
- gpm5: gpm5 {
+ gpm5: gpm5-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
};
- gpd1: gpd1 {
+ gpd1: gpd1-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -110,7 +110,7 @@ gpd1: gpd1 {
#interrupt-cells = <2>;
};
- gpe0: gpe0 {
+ gpe0: gpe0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -118,7 +118,7 @@ gpe0: gpe0 {
#interrupt-cells = <2>;
};
- gpe1: gpe1 {
+ gpe1: gpe1-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -126,7 +126,7 @@ gpe1: gpe1 {
#interrupt-cells = <2>;
};
- gpf0: gpf0 {
+ gpf0: gpf0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -134,7 +134,7 @@ gpf0: gpf0 {
#interrupt-cells = <2>;
};
- gpf1: gpf1 {
+ gpf1: gpf1-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -142,7 +142,7 @@ gpf1: gpf1 {
#interrupt-cells = <2>;
};
- gpg0: gpg0 {
+ gpg0: gpg0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -150,7 +150,7 @@ gpg0: gpg0 {
#interrupt-cells = <2>;
};
- gpg1: gpg1 {
+ gpg1: gpg1-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -158,7 +158,7 @@ gpg1: gpg1 {
#interrupt-cells = <2>;
};
- gpg2: gpg2 {
+ gpg2: gpg2-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -166,7 +166,7 @@ gpg2: gpg2 {
#interrupt-cells = <2>;
};
- gph0: gph0 {
+ gph0: gph0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -174,7 +174,7 @@ gph0: gph0 {
#interrupt-cells = <2>;
};
- gph1: gph1 {
+ gph1: gph1-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -182,52 +182,52 @@ gph1: gph1 {
#interrupt-cells = <2>;
};
- gpm7: gpm7 {
+ gpm7: gpm7-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
};
- gpy0: gpy0 {
+ gpy0: gpy0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
};
- gpy1: gpy1 {
+ gpy1: gpy1-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
};
- gpy2: gpy2 {
+ gpy2: gpy2-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
};
- gpy3: gpy3 {
+ gpy3: gpy3-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
};
- gpy4: gpy4 {
+ gpy4: gpy4-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
};
- gpy5: gpy5 {
+ gpy5: gpy5-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
};
- gpy6: gpy6 {
+ gpy6: gpy6-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
};
- gpy7: gpy7 {
+ gpy7: gpy7-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
};
- gpx0: gpx0 {
+ gpx0: gpx0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -244,7 +244,7 @@ gpx0: gpx0 {
<27 1>;
};
- gpx1: gpx1 {
+ gpx1: gpx1-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -261,7 +261,7 @@ gpx1: gpx1 {
<31 1>;
};
- gpx2: gpx2 {
+ gpx2: gpx2-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -269,7 +269,7 @@ gpx2: gpx2 {
#interrupt-cells = <2>;
};
- gpx3: gpx3 {
+ gpx3: gpx3-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -277,210 +277,210 @@ gpx3: gpx3 {
#interrupt-cells = <2>;
};
- uart0_data: uart0-data {
+ uart0_data: uart0-data-pins {
samsung,pins = "gpa0-0", "gpa0-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
};
- uart0_fctl: uart0-fctl {
+ uart0_fctl: uart0-fctl-pins {
samsung,pins = "gpa0-2", "gpa0-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
};
- uart1_data: uart1-data {
+ uart1_data: uart1-data-pins {
samsung,pins = "gpa0-4", "gpa0-5";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
};
- uart1_fctl: uart1-fctl {
+ uart1_fctl: uart1-fctl-pins {
samsung,pins = "gpa0-6", "gpa0-7";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
};
- i2c2_bus: i2c2-bus {
+ i2c2_bus: i2c2-bus-pins {
samsung,pins = "gpa0-6", "gpa0-7";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
};
- uart2_data: uart2-data {
+ uart2_data: uart2-data-pins {
samsung,pins = "gpa1-0", "gpa1-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
};
- uart2_fctl: uart2-fctl {
+ uart2_fctl: uart2-fctl-pins {
samsung,pins = "gpa1-2", "gpa1-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
};
- i2c3_bus: i2c3-bus {
+ i2c3_bus: i2c3-bus-pins {
samsung,pins = "gpa1-2", "gpa1-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
};
- uart3_data: uart3-data {
+ uart3_data: uart3-data-pins {
samsung,pins = "gpa1-4", "gpa1-5";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
};
- i2c4_hs_bus: i2c4-hs-bus {
+ i2c4_hs_bus: i2c4-hs-bus-pins {
samsung,pins = "gpa2-0", "gpa2-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
};
- i2c5_hs_bus: i2c5-hs-bus {
+ i2c5_hs_bus: i2c5-hs-bus-pins {
samsung,pins = "gpa2-2", "gpa2-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
};
- i2c6_hs_bus: i2c6-hs-bus {
+ i2c6_hs_bus: i2c6-hs-bus-pins {
samsung,pins = "gpb1-3", "gpb1-4";
samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
};
- pwm0_out: pwm0-out {
+ pwm0_out: pwm0-out-pins {
samsung,pins = "gpb2-0";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
};
- pwm1_out: pwm1-out {
+ pwm1_out: pwm1-out-pins {
samsung,pins = "gpb2-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
};
- pwm2_out: pwm2-out {
+ pwm2_out: pwm2-out-pins {
samsung,pins = "gpb2-2";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
};
- pwm3_out: pwm3-out {
+ pwm3_out: pwm3-out-pins {
samsung,pins = "gpb2-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
};
- i2c7_hs_bus: i2c7-hs-bus {
+ i2c7_hs_bus: i2c7-hs-bus-pins {
samsung,pins = "gpb2-2", "gpb2-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
};
- i2c0_bus: i2c0-bus {
+ i2c0_bus: i2c0-bus-pins {
samsung,pins = "gpb3-0", "gpb3-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
};
- i2c1_bus: i2c1-bus {
+ i2c1_bus: i2c1-bus-pins {
samsung,pins = "gpb3-2", "gpb3-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
};
- sd0_clk: sd0-clk {
+ sd0_clk: sd0-clk-pins {
samsung,pins = "gpc0-0";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
};
- sd0_cmd: sd0-cmd {
+ sd0_cmd: sd0-cmd-pins {
samsung,pins = "gpc0-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
};
- sd0_cd: sd0-cd {
+ sd0_cd: sd0-cd-pins {
samsung,pins = "gpc0-2";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
};
- sd0_bus1: sd0-bus-width1 {
+ sd0_bus1: sd0-bus-width1-pins {
samsung,pins = "gpc0-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
};
- sd0_bus4: sd0-bus-width4 {
+ sd0_bus4: sd0-bus-width4-pins {
samsung,pins = "gpc0-4", "gpc0-5", "gpc0-6";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
};
- sd2_clk: sd2-clk {
+ sd2_clk: sd2-clk-pins {
samsung,pins = "gpc2-0";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
};
- sd2_cmd: sd2-cmd {
+ sd2_cmd: sd2-cmd-pins {
samsung,pins = "gpc2-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
};
- sd2_cd: sd2-cd {
+ sd2_cd: sd2-cd-pins {
samsung,pins = "gpc2-2";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
};
- sd2_bus1: sd2-bus-width1 {
+ sd2_bus1: sd2-bus-width1-pins {
samsung,pins = "gpc2-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
};
- sd2_bus4: sd2-bus-width4 {
+ sd2_bus4: sd2-bus-width4-pins {
samsung,pins = "gpc2-4", "gpc2-5", "gpc2-6";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
};
- sd0_bus8: sd0-bus-width8 {
+ sd0_bus8: sd0-bus-width8-pins {
samsung,pins = "gpc3-0", "gpc3-1", "gpc3-2", "gpc3-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
@@ -489,7 +489,7 @@ sd0_bus8: sd0-bus-width8 {
};
&pinctrl_1 {
- gpj0: gpj0 {
+ gpj0: gpj0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -497,7 +497,7 @@ gpj0: gpj0 {
#interrupt-cells = <2>;
};
- gpj1: gpj1 {
+ gpj1: gpj1-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -505,7 +505,7 @@ gpj1: gpj1 {
#interrupt-cells = <2>;
};
- gpj2: gpj2 {
+ gpj2: gpj2-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -513,7 +513,7 @@ gpj2: gpj2 {
#interrupt-cells = <2>;
};
- gpj3: gpj3 {
+ gpj3: gpj3-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -521,7 +521,7 @@ gpj3: gpj3 {
#interrupt-cells = <2>;
};
- gpj4: gpj4 {
+ gpj4: gpj4-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -529,7 +529,7 @@ gpj4: gpj4 {
#interrupt-cells = <2>;
};
- gpk0: gpk0 {
+ gpk0: gpk0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -537,7 +537,7 @@ gpk0: gpk0 {
#interrupt-cells = <2>;
};
- gpk1: gpk1 {
+ gpk1: gpk1-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -545,7 +545,7 @@ gpk1: gpk1 {
#interrupt-cells = <2>;
};
- gpk2: gpk2 {
+ gpk2: gpk2-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -553,7 +553,7 @@ gpk2: gpk2 {
#interrupt-cells = <2>;
};
- gpk3: gpk3 {
+ gpk3: gpk3-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -561,28 +561,28 @@ gpk3: gpk3 {
#interrupt-cells = <2>;
};
- usb3_1_oc: usb3-1-oc {
+ usb3_1_oc: usb3-1-oc-pins {
samsung,pins = "gpk2-4", "gpk2-5";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
};
- usb3_1_vbusctrl: usb3-1-vbusctrl {
+ usb3_1_vbusctrl: usb3-1-vbusctrl-pins {
samsung,pins = "gpk2-6", "gpk2-7";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
};
- usb3_0_oc: usb3-0-oc {
+ usb3_0_oc: usb3-0-oc-pins {
samsung,pins = "gpk3-0", "gpk3-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
};
- usb3_0_vbusctrl: usb3-0-vbusctrl {
+ usb3_0_vbusctrl: usb3-0-vbusctrl-pins {
samsung,pins = "gpk3-2", "gpk3-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
@@ -591,7 +591,7 @@ usb3_0_vbusctrl: usb3-0-vbusctrl {
};
&pinctrl_2 {
- gpv0: gpv0 {
+ gpv0: gpv0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -599,7 +599,7 @@ gpv0: gpv0 {
#interrupt-cells = <2>;
};
- gpv1: gpv1 {
+ gpv1: gpv1-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -607,7 +607,7 @@ gpv1: gpv1 {
#interrupt-cells = <2>;
};
- gpv2: gpv2 {
+ gpv2: gpv2-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -615,7 +615,7 @@ gpv2: gpv2 {
#interrupt-cells = <2>;
};
- gpv3: gpv3 {
+ gpv3: gpv3-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -623,7 +623,7 @@ gpv3: gpv3 {
#interrupt-cells = <2>;
};
- gpv4: gpv4 {
+ gpv4: gpv4-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -633,7 +633,7 @@ gpv4: gpv4 {
};
&pinctrl_3 {
- gpz: gpz {
+ gpz: gpz-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -641,7 +641,7 @@ gpz: gpz {
#interrupt-cells = <2>;
};
- audi2s0_bus: audi2s0-bus {
+ audi2s0_bus: audi2s0-bus-pins {
samsung,pins = "gpz-0", "gpz-1", "gpz-2", "gpz-3",
"gpz-4";
samsung,pin-function = <2>;
diff --git a/arch/arm/boot/dts/exynos5410-smdk5410.dts b/arch/arm/boot/dts/exynos5410-smdk5410.dts
index 2a3ade77a2de..5b2e567809ae 100644
--- a/arch/arm/boot/dts/exynos5410-smdk5410.dts
+++ b/arch/arm/boot/dts/exynos5410-smdk5410.dts
@@ -66,14 +66,14 @@ &mmc_2 {
};
&pinctrl_0 {
- srom_ctl: srom-ctl {
+ srom_ctl: srom-ctl-pins {
samsung,pins = "gpy0-3", "gpy0-4", "gpy0-5",
"gpy1-0", "gpy1-1", "gpy1-2", "gpy1-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
};
- srom_ebi: srom-ebi {
+ srom_ebi: srom-ebi-pins {
samsung,pins = "gpy3-0", "gpy3-1", "gpy3-2", "gpy3-3",
"gpy3-4", "gpy3-5", "gpy3-6", "gpy3-7",
"gpy5-0", "gpy5-1", "gpy5-2", "gpy5-3",
--
2.32.0
Align the pin controller related nodes with dtschema. No functional
change expected.
Signed-off-by: Krzysztof Kozlowski <[email protected]>
---
arch/arm/boot/dts/exynos5420-arndale-octa.dts | 2 +-
arch/arm/boot/dts/exynos5420-peach-pit.dts | 36 ++--
arch/arm/boot/dts/exynos5420-pinctrl.dtsi | 194 +++++++++---------
arch/arm/boot/dts/exynos5420-smdk5420.dts | 6 +-
arch/arm/boot/dts/exynos5422-odroid-core.dtsi | 2 +-
.../boot/dts/exynos5422-odroidxu3-common.dtsi | 6 +-
arch/arm/boot/dts/exynos5800-peach-pi.dts | 36 ++--
7 files changed, 141 insertions(+), 141 deletions(-)
diff --git a/arch/arm/boot/dts/exynos5420-arndale-octa.dts b/arch/arm/boot/dts/exynos5420-arndale-octa.dts
index dfc7f14f5772..327cf7105a35 100644
--- a/arch/arm/boot/dts/exynos5420-arndale-octa.dts
+++ b/arch/arm/boot/dts/exynos5420-arndale-octa.dts
@@ -808,7 +808,7 @@ &mmc_2 {
};
&pinctrl_0 {
- s2mps11_irq: s2mps11-irq {
+ s2mps11_irq: s2mps11-irq-pins {
samsung,pins = "gpx3-2";
samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
diff --git a/arch/arm/boot/dts/exynos5420-peach-pit.dts b/arch/arm/boot/dts/exynos5420-peach-pit.dts
index e8819659081a..915878ee3ec6 100644
--- a/arch/arm/boot/dts/exynos5420-peach-pit.dts
+++ b/arch/arm/boot/dts/exynos5420-peach-pit.dts
@@ -774,14 +774,14 @@ &pinctrl_0 {
pinctrl-names = "default";
pinctrl-0 = <&mask_tpm_reset>;
- wifi_en: wifi-en {
+ wifi_en: wifi-en-pins {
samsung,pins = "gpx0-0";
samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
};
- max98090_irq: max98090-irq {
+ max98090_irq: max98090-irq-pins {
samsung,pins = "gpx0-2";
samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
@@ -789,7 +789,7 @@ max98090_irq: max98090-irq {
};
/* We need GPX0_6 to be low at sleep time; just keep it low always */
- mask_tpm_reset: mask-tpm-reset {
+ mask_tpm_reset: mask-tpm-reset-pins {
samsung,pins = "gpx0-6";
samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
@@ -797,70 +797,70 @@ mask_tpm_reset: mask-tpm-reset {
samsung,pin-val = <0>;
};
- tpm_irq: tpm-irq {
+ tpm_irq: tpm-irq-pins {
samsung,pins = "gpx1-0";
samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
};
- trackpad_irq: trackpad-irq {
+ trackpad_irq: trackpad-irq-pins {
samsung,pins = "gpx1-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
};
- power_key_irq: power-key-irq {
+ power_key_irq: power-key-irq-pins {
samsung,pins = "gpx1-2";
samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
};
- ec_irq: ec-irq {
+ ec_irq: ec-irq-pins {
samsung,pins = "gpx1-5";
samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
};
- tps65090_irq: tps65090-irq {
+ tps65090_irq: tps65090-irq-pins {
samsung,pins = "gpx2-5";
samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
};
- dp_hpd_gpio: dp_hpd_gpio {
+ dp_hpd_gpio: dp-hpd-gpio-pins {
samsung,pins = "gpx2-6";
samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
};
- max77802_irq: max77802-irq {
+ max77802_irq: max77802-irq-pins {
samsung,pins = "gpx3-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
};
- lid_irq: lid-irq {
+ lid_irq: lid-irq-pins {
samsung,pins = "gpx3-4";
samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
};
- hdmi_hpd_irq: hdmi-hpd-irq {
+ hdmi_hpd_irq: hdmi-hpd-irq-pins {
samsung,pins = "gpx3-7";
samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
};
- pmic_dvs_1: pmic-dvs-1 {
+ pmic_dvs_1: pmic-dvs-1-pins {
samsung,pins = "gpy7-6";
samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
@@ -891,7 +891,7 @@ &sd1_cmd {
};
&pinctrl_2 {
- pmic_dvs_2: pmic-dvs-2 {
+ pmic_dvs_2: pmic-dvs-2-pins {
samsung,pins = "gpj4-2", "gpj4-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
@@ -907,28 +907,28 @@ &spi2_bus {
&pinctrl_3 {
/* Drive SPI chip select at x2 for better integrity */
- ec_spi_cs: ec-spi-cs {
+ ec_spi_cs: ec-spi-cs-pins {
samsung,pins = "gpb1-2";
samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
};
- usb300_vbus_en: usb300-vbus-en {
+ usb300_vbus_en: usb300-vbus-en-pins {
samsung,pins = "gph0-0";
samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
};
- usb301_vbus_en: usb301-vbus-en {
+ usb301_vbus_en: usb301-vbus-en-pins {
samsung,pins = "gph0-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
};
- pmic_selb: pmic-selb {
+ pmic_selb: pmic-selb-pins {
samsung,pins = "gph0-2", "gph0-3", "gph0-4", "gph0-5",
"gph0-6";
samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
diff --git a/arch/arm/boot/dts/exynos5420-pinctrl.dtsi b/arch/arm/boot/dts/exynos5420-pinctrl.dtsi
index b82af7c89654..546ba274f4e5 100644
--- a/arch/arm/boot/dts/exynos5420-pinctrl.dtsi
+++ b/arch/arm/boot/dts/exynos5420-pinctrl.dtsi
@@ -12,7 +12,7 @@
#include <dt-bindings/pinctrl/samsung.h>
&pinctrl_0 {
- gpy7: gpy7 {
+ gpy7: gpy7-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -20,7 +20,7 @@ gpy7: gpy7 {
#interrupt-cells = <2>;
};
- gpx0: gpx0 {
+ gpx0: gpx0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -31,7 +31,7 @@ gpx0: gpx0 {
<26 0>, <26 1>, <27 0>, <27 1>;
};
- gpx1: gpx1 {
+ gpx1: gpx1-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -42,7 +42,7 @@ gpx1: gpx1 {
<30 0>, <30 1>, <31 0>, <31 1>;
};
- gpx2: gpx2 {
+ gpx2: gpx2-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -50,7 +50,7 @@ gpx2: gpx2 {
#interrupt-cells = <2>;
};
- gpx3: gpx3 {
+ gpx3: gpx3-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -58,14 +58,14 @@ gpx3: gpx3 {
#interrupt-cells = <2>;
};
- dp_hpd: dp_hpd {
+ dp_hpd: dp-hpd-pins {
samsung,pins = "gpx0-7";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
};
- hdmi_cec: hdmi-cec {
+ hdmi_cec: hdmi-cec-pins {
samsung,pins = "gpx3-6";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
@@ -74,7 +74,7 @@ hdmi_cec: hdmi-cec {
};
&pinctrl_1 {
- gpc0: gpc0 {
+ gpc0: gpc0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -82,7 +82,7 @@ gpc0: gpc0 {
#interrupt-cells = <2>;
};
- gpc1: gpc1 {
+ gpc1: gpc1-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -90,7 +90,7 @@ gpc1: gpc1 {
#interrupt-cells = <2>;
};
- gpc2: gpc2 {
+ gpc2: gpc2-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -98,7 +98,7 @@ gpc2: gpc2 {
#interrupt-cells = <2>;
};
- gpc3: gpc3 {
+ gpc3: gpc3-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -106,7 +106,7 @@ gpc3: gpc3 {
#interrupt-cells = <2>;
};
- gpc4: gpc4 {
+ gpc4: gpc4-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -114,7 +114,7 @@ gpc4: gpc4 {
#interrupt-cells = <2>;
};
- gpd1: gpd1 {
+ gpd1: gpd1-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -122,175 +122,175 @@ gpd1: gpd1 {
#interrupt-cells = <2>;
};
- gpy0: gpy0 {
+ gpy0: gpy0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
};
- gpy1: gpy1 {
+ gpy1: gpy1-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
};
- gpy2: gpy2 {
+ gpy2: gpy2-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
};
- gpy3: gpy3 {
+ gpy3: gpy3-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
};
- gpy4: gpy4 {
+ gpy4: gpy4-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
};
- gpy5: gpy5 {
+ gpy5: gpy5-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
};
- gpy6: gpy6 {
+ gpy6: gpy6-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
};
- sd0_clk: sd0-clk {
+ sd0_clk: sd0-clk-pins {
samsung,pins = "gpc0-0";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
};
- sd0_cmd: sd0-cmd {
+ sd0_cmd: sd0-cmd-pins {
samsung,pins = "gpc0-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
};
- sd0_cd: sd0-cd {
+ sd0_cd: sd0-cd-pins {
samsung,pins = "gpc0-2";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
};
- sd0_bus1: sd0-bus-width1 {
+ sd0_bus1: sd0-bus-width1-pins {
samsung,pins = "gpc0-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
};
- sd0_bus4: sd0-bus-width4 {
+ sd0_bus4: sd0-bus-width4-pins {
samsung,pins = "gpc0-4", "gpc0-5", "gpc0-6";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
};
- sd0_bus8: sd0-bus-width8 {
+ sd0_bus8: sd0-bus-width8-pins {
samsung,pins = "gpc3-0", "gpc3-1", "gpc3-2", "gpc3-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
};
- sd0_rclk: sd0-rclk {
+ sd0_rclk: sd0-rclk-pins {
samsung,pins = "gpc0-7";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
};
- sd1_clk: sd1-clk {
+ sd1_clk: sd1-clk-pins {
samsung,pins = "gpc1-0";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
};
- sd1_cmd: sd1-cmd {
+ sd1_cmd: sd1-cmd-pins {
samsung,pins = "gpc1-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
};
- sd1_cd: sd1-cd {
+ sd1_cd: sd1-cd-pins {
samsung,pins = "gpc1-2";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
};
- sd1_int: sd1-int {
+ sd1_int: sd1-int-pins {
samsung,pins = "gpd1-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
};
- sd1_bus1: sd1-bus-width1 {
+ sd1_bus1: sd1-bus-width1-pins {
samsung,pins = "gpc1-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
};
- sd1_bus4: sd1-bus-width4 {
+ sd1_bus4: sd1-bus-width4-pins {
samsung,pins = "gpc1-4", "gpc1-5", "gpc1-6";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
};
- sd1_bus8: sd1-bus-width8 {
+ sd1_bus8: sd1-bus-width8-pins {
samsung,pins = "gpd1-4", "gpd1-5", "gpd1-6", "gpd1-7";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
};
- sd2_clk: sd2-clk {
+ sd2_clk: sd2-clk-pins {
samsung,pins = "gpc2-0";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
};
- sd2_cmd: sd2-cmd {
+ sd2_cmd: sd2-cmd-pins {
samsung,pins = "gpc2-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
};
- sd2_cd: sd2-cd {
+ sd2_cd: sd2-cd-pins {
samsung,pins = "gpc2-2";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
};
- sd2_bus1: sd2-bus-width1 {
+ sd2_bus1: sd2-bus-width1-pins {
samsung,pins = "gpc2-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
};
- sd2_bus4: sd2-bus-width4 {
+ sd2_bus4: sd2-bus-width4-pins {
samsung,pins = "gpc2-4", "gpc2-5", "gpc2-6";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
};
- sd2_wp: sd2-wp {
+ sd2_wp: sd2-wp-pins {
samsung,pins = "gpc4-0";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
@@ -299,7 +299,7 @@ sd2_wp: sd2-wp {
};
&pinctrl_2 {
- gpe0: gpe0 {
+ gpe0: gpe0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -307,7 +307,7 @@ gpe0: gpe0 {
#interrupt-cells = <2>;
};
- gpe1: gpe1 {
+ gpe1: gpe1-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -315,7 +315,7 @@ gpe1: gpe1 {
#interrupt-cells = <2>;
};
- gpf0: gpf0 {
+ gpf0: gpf0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -323,7 +323,7 @@ gpf0: gpf0 {
#interrupt-cells = <2>;
};
- gpf1: gpf1 {
+ gpf1: gpf1-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -331,7 +331,7 @@ gpf1: gpf1 {
#interrupt-cells = <2>;
};
- gpg0: gpg0 {
+ gpg0: gpg0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -339,7 +339,7 @@ gpg0: gpg0 {
#interrupt-cells = <2>;
};
- gpg1: gpg1 {
+ gpg1: gpg1-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -347,7 +347,7 @@ gpg1: gpg1 {
#interrupt-cells = <2>;
};
- gpg2: gpg2 {
+ gpg2: gpg2-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -355,7 +355,7 @@ gpg2: gpg2 {
#interrupt-cells = <2>;
};
- gpj4: gpj4 {
+ gpj4: gpj4-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -363,7 +363,7 @@ gpj4: gpj4 {
#interrupt-cells = <2>;
};
- cam_gpio_a: cam-gpio-a {
+ cam_gpio_a: cam-gpio-a-pins {
samsung,pins = "gpe0-0", "gpe0-1", "gpe0-2", "gpe0-3",
"gpe0-4", "gpe0-5", "gpe0-6", "gpe0-7",
"gpe1-0", "gpe1-1";
@@ -372,7 +372,7 @@ cam_gpio_a: cam-gpio-a {
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
};
- cam_gpio_b: cam-gpio-b {
+ cam_gpio_b: cam-gpio-b-pins {
samsung,pins = "gpf0-0", "gpf0-1", "gpf0-2", "gpf0-3",
"gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
@@ -380,42 +380,42 @@ cam_gpio_b: cam-gpio-b {
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
};
- cam_i2c2_bus: cam-i2c2-bus {
+ cam_i2c2_bus: cam-i2c2-bus-pins {
samsung,pins = "gpf0-4", "gpf0-5";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
};
- cam_spi1_bus: cam-spi1-bus {
+ cam_spi1_bus: cam-spi1-bus-pins {
samsung,pins = "gpe0-4", "gpe0-5", "gpf0-2", "gpf0-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
};
- cam_i2c1_bus: cam-i2c1-bus {
+ cam_i2c1_bus: cam-i2c1-bus-pins {
samsung,pins = "gpf0-2", "gpf0-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
};
- cam_i2c0_bus: cam-i2c0-bus {
+ cam_i2c0_bus: cam-i2c0-bus-pins {
samsung,pins = "gpf0-0", "gpf0-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
};
- cam_spi0_bus: cam-spi0-bus {
+ cam_spi0_bus: cam-spi0-bus-pins {
samsung,pins = "gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
};
- cam_bayrgb_bus: cam-bayrgb-bus {
+ cam_bayrgb_bus: cam-bayrgb-bus-pins {
samsung,pins = "gpg0-0", "gpg0-1", "gpg0-2", "gpg0-3",
"gpg0-4", "gpg0-5", "gpg0-6", "gpg0-7",
"gpg1-0", "gpg1-1", "gpg1-2", "gpg1-3",
@@ -428,7 +428,7 @@ cam_bayrgb_bus: cam-bayrgb-bus {
};
&pinctrl_3 {
- gpa0: gpa0 {
+ gpa0: gpa0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -436,7 +436,7 @@ gpa0: gpa0 {
#interrupt-cells = <2>;
};
- gpa1: gpa1 {
+ gpa1: gpa1-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -444,7 +444,7 @@ gpa1: gpa1 {
#interrupt-cells = <2>;
};
- gpa2: gpa2 {
+ gpa2: gpa2-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -452,7 +452,7 @@ gpa2: gpa2 {
#interrupt-cells = <2>;
};
- gpb0: gpb0 {
+ gpb0: gpb0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -460,7 +460,7 @@ gpb0: gpb0 {
#interrupt-cells = <2>;
};
- gpb1: gpb1 {
+ gpb1: gpb1-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -468,7 +468,7 @@ gpb1: gpb1 {
#interrupt-cells = <2>;
};
- gpb2: gpb2 {
+ gpb2: gpb2-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -476,7 +476,7 @@ gpb2: gpb2 {
#interrupt-cells = <2>;
};
- gpb3: gpb3 {
+ gpb3: gpb3-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -484,7 +484,7 @@ gpb3: gpb3 {
#interrupt-cells = <2>;
};
- gpb4: gpb4 {
+ gpb4: gpb4-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -492,7 +492,7 @@ gpb4: gpb4 {
#interrupt-cells = <2>;
};
- gph0: gph0 {
+ gph0: gph0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -500,98 +500,98 @@ gph0: gph0 {
#interrupt-cells = <2>;
};
- uart0_data: uart0-data {
+ uart0_data: uart0-data-pins {
samsung,pins = "gpa0-0", "gpa0-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
};
- uart0_fctl: uart0-fctl {
+ uart0_fctl: uart0-fctl-pins {
samsung,pins = "gpa0-2", "gpa0-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
};
- uart1_data: uart1-data {
+ uart1_data: uart1-data-pins {
samsung,pins = "gpa0-4", "gpa0-5";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
};
- uart1_fctl: uart1-fctl {
+ uart1_fctl: uart1-fctl-pins {
samsung,pins = "gpa0-6", "gpa0-7";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
};
- i2c2_bus: i2c2-bus {
+ i2c2_bus: i2c2-bus-pins {
samsung,pins = "gpa0-6", "gpa0-7";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
};
- uart2_data: uart2-data {
+ uart2_data: uart2-data-pins {
samsung,pins = "gpa1-0", "gpa1-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
};
- uart2_fctl: uart2-fctl {
+ uart2_fctl: uart2-fctl-pins {
samsung,pins = "gpa1-2", "gpa1-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
};
- i2c3_bus: i2c3-bus {
+ i2c3_bus: i2c3-bus-pins {
samsung,pins = "gpa1-2", "gpa1-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
};
- uart3_data: uart3-data {
+ uart3_data: uart3-data-pins {
samsung,pins = "gpa1-4", "gpa1-5";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
};
- spi0_bus: spi0-bus {
+ spi0_bus: spi0-bus-pins {
samsung,pins = "gpa2-0", "gpa2-1", "gpa2-2", "gpa2-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
};
- spi1_bus: spi1-bus {
+ spi1_bus: spi1-bus-pins {
samsung,pins = "gpa2-4", "gpa2-6", "gpa2-7";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
};
- i2c4_hs_bus: i2c4-hs-bus {
+ i2c4_hs_bus: i2c4-hs-bus-pins {
samsung,pins = "gpa2-0", "gpa2-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
};
- i2c5_hs_bus: i2c5-hs-bus {
+ i2c5_hs_bus: i2c5-hs-bus-pins {
samsung,pins = "gpa2-2", "gpa2-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
};
- i2s1_bus: i2s1-bus {
+ i2s1_bus: i2s1-bus-pins {
samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2", "gpb0-3",
"gpb0-4";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
@@ -599,7 +599,7 @@ i2s1_bus: i2s1-bus {
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
};
- pcm1_bus: pcm1-bus {
+ pcm1_bus: pcm1-bus-pins {
samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2", "gpb0-3",
"gpb0-4";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
@@ -607,7 +607,7 @@ pcm1_bus: pcm1-bus {
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
};
- i2s2_bus: i2s2-bus {
+ i2s2_bus: i2s2-bus-pins {
samsung,pins = "gpb1-0", "gpb1-1", "gpb1-2", "gpb1-3",
"gpb1-4";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
@@ -615,7 +615,7 @@ i2s2_bus: i2s2-bus {
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
};
- pcm2_bus: pcm2-bus {
+ pcm2_bus: pcm2-bus-pins {
samsung,pins = "gpb1-0", "gpb1-1", "gpb1-2", "gpb1-3",
"gpb1-4";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
@@ -623,91 +623,91 @@ pcm2_bus: pcm2-bus {
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
};
- spdif_bus: spdif-bus {
+ spdif_bus: spdif-bus-pins {
samsung,pins = "gpb1-0", "gpb1-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
};
- spi2_bus: spi2-bus {
+ spi2_bus: spi2-bus-pins {
samsung,pins = "gpb1-1", "gpb1-3", "gpb1-4";
samsung,pin-function = <EXYNOS_PIN_FUNC_5>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
};
- i2c6_hs_bus: i2c6-hs-bus {
+ i2c6_hs_bus: i2c6-hs-bus-pins {
samsung,pins = "gpb1-3", "gpb1-4";
samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
};
- pwm0_out: pwm0-out {
+ pwm0_out: pwm0-out-pins {
samsung,pins = "gpb2-0";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
};
- pwm1_out: pwm1-out {
+ pwm1_out: pwm1-out-pins {
samsung,pins = "gpb2-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
};
- pwm2_out: pwm2-out {
+ pwm2_out: pwm2-out-pins {
samsung,pins = "gpb2-2";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
};
- pwm3_out: pwm3-out {
+ pwm3_out: pwm3-out-pins {
samsung,pins = "gpb2-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
};
- i2c7_hs_bus: i2c7-hs-bus {
+ i2c7_hs_bus: i2c7-hs-bus-pins {
samsung,pins = "gpb2-2", "gpb2-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
};
- i2c0_bus: i2c0-bus {
+ i2c0_bus: i2c0-bus-pins {
samsung,pins = "gpb3-0", "gpb3-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
};
- i2c1_bus: i2c1-bus {
+ i2c1_bus: i2c1-bus-pins {
samsung,pins = "gpb3-2", "gpb3-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
};
- i2c8_hs_bus: i2c8-hs-bus {
+ i2c8_hs_bus: i2c8-hs-bus-pins {
samsung,pins = "gpb3-4", "gpb3-5";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
};
- i2c9_hs_bus: i2c9-hs-bus {
+ i2c9_hs_bus: i2c9-hs-bus-pins {
samsung,pins = "gpb3-6", "gpb3-7";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
};
- i2c10_hs_bus: i2c10-hs-bus {
+ i2c10_hs_bus: i2c10-hs-bus-pins {
samsung,pins = "gpb4-0", "gpb4-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
@@ -716,7 +716,7 @@ i2c10_hs_bus: i2c10-hs-bus {
};
&pinctrl_4 {
- gpz: gpz {
+ gpz: gpz-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -724,7 +724,7 @@ gpz: gpz {
#interrupt-cells = <2>;
};
- i2s0_bus: i2s0-bus {
+ i2s0_bus: i2s0-bus-pins {
samsung,pins = "gpz-0", "gpz-1", "gpz-2", "gpz-3",
"gpz-4", "gpz-5", "gpz-6";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
diff --git a/arch/arm/boot/dts/exynos5420-smdk5420.dts b/arch/arm/boot/dts/exynos5420-smdk5420.dts
index a4f0e3ffedbd..b8b1418d36e3 100644
--- a/arch/arm/boot/dts/exynos5420-smdk5420.dts
+++ b/arch/arm/boot/dts/exynos5420-smdk5420.dts
@@ -377,7 +377,7 @@ &mmc_2 {
};
&pinctrl_0 {
- hdmi_hpd_irq: hdmi-hpd-irq {
+ hdmi_hpd_irq: hdmi-hpd-irq-pins {
samsung,pins = "gpx3-7";
samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
@@ -386,14 +386,14 @@ hdmi_hpd_irq: hdmi-hpd-irq {
};
&pinctrl_2 {
- usb300_vbus_en: usb300-vbus-en {
+ usb300_vbus_en: usb300-vbus-en-pins {
samsung,pins = "gpg0-5";
samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
};
- usb301_vbus_en: usb301-vbus-en {
+ usb301_vbus_en: usb301-vbus-en-pins {
samsung,pins = "gpg1-4";
samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
diff --git a/arch/arm/boot/dts/exynos5422-odroid-core.dtsi b/arch/arm/boot/dts/exynos5422-odroid-core.dtsi
index e7958dbecfd2..24c428b84192 100644
--- a/arch/arm/boot/dts/exynos5422-odroid-core.dtsi
+++ b/arch/arm/boot/dts/exynos5422-odroid-core.dtsi
@@ -999,7 +999,7 @@ &nocp_mem1_1 {
};
&pinctrl_0 {
- s2mps11_irq: s2mps11-irq {
+ s2mps11_irq: s2mps11-irq-pins {
samsung,pins = "gpx0-4";
samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
index e35af40a55cb..a6961ff24030 100644
--- a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
+++ b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
@@ -480,14 +480,14 @@ &mmc_0 {
};
&pinctrl_0 {
- power_key: power-key {
+ power_key: power-key-pins {
samsung,pins = "gpx0-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
};
- hdmi_hpd_irq: hdmi-hpd-irq {
+ hdmi_hpd_irq: hdmi-hpd-irq-pins {
samsung,pins = "gpx3-7";
samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
@@ -496,7 +496,7 @@ hdmi_hpd_irq: hdmi-hpd-irq {
};
&pinctrl_1 {
- emmc_nrst_pin: emmc-nrst {
+ emmc_nrst_pin: emmc-nrst-pins {
samsung,pins = "gpd1-0";
samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
diff --git a/arch/arm/boot/dts/exynos5800-peach-pi.dts b/arch/arm/boot/dts/exynos5800-peach-pi.dts
index eca805b83816..3bc40840573f 100644
--- a/arch/arm/boot/dts/exynos5800-peach-pi.dts
+++ b/arch/arm/boot/dts/exynos5800-peach-pi.dts
@@ -756,14 +756,14 @@ &pinctrl_0 {
pinctrl-names = "default";
pinctrl-0 = <&mask_tpm_reset>;
- wifi_en: wifi-en {
+ wifi_en: wifi-en-pins {
samsung,pins = "gpx0-0";
samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
};
- max98091_irq: max98091-irq {
+ max98091_irq: max98091-irq-pins {
samsung,pins = "gpx0-2";
samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
@@ -771,7 +771,7 @@ max98091_irq: max98091-irq {
};
/* We need GPX0_6 to be low at sleep time; just keep it low always */
- mask_tpm_reset: mask-tpm-reset {
+ mask_tpm_reset: mask-tpm-reset-pins {
samsung,pins = "gpx0-6";
samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
@@ -779,70 +779,70 @@ mask_tpm_reset: mask-tpm-reset {
samsung,pin-val = <0>;
};
- tpm_irq: tpm-irq {
+ tpm_irq: tpm-irq-pins {
samsung,pins = "gpx1-0";
samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
};
- trackpad_irq: trackpad-irq {
+ trackpad_irq: trackpad-irq-pins {
samsung,pins = "gpx1-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
};
- power_key_irq: power-key-irq {
+ power_key_irq: power-key-irq-pins {
samsung,pins = "gpx1-2";
samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
};
- ec_irq: ec-irq {
+ ec_irq: ec-irq-pins {
samsung,pins = "gpx1-5";
samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
};
- tps65090_irq: tps65090-irq {
+ tps65090_irq: tps65090-irq-pins {
samsung,pins = "gpx2-5";
samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
};
- dp_hpd_gpio: dp_hpd_gpio {
+ dp_hpd_gpio: dp-hpd-gpio-pins {
samsung,pins = "gpx2-6";
samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
};
- max77802_irq: max77802-irq {
+ max77802_irq: max77802-irq-pins {
samsung,pins = "gpx3-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
};
- lid_irq: lid-irq {
+ lid_irq: lid-irq-pins {
samsung,pins = "gpx3-4";
samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
};
- hdmi_hpd_irq: hdmi-hpd-irq {
+ hdmi_hpd_irq: hdmi-hpd-irq-pins {
samsung,pins = "gpx3-7";
samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
};
- pmic_dvs_1: pmic-dvs-1 {
+ pmic_dvs_1: pmic-dvs-1-pins {
samsung,pins = "gpy7-6";
samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
@@ -873,7 +873,7 @@ &sd1_cmd {
};
&pinctrl_2 {
- pmic_dvs_2: pmic-dvs-2 {
+ pmic_dvs_2: pmic-dvs-2-pins {
samsung,pins = "gpj4-2", "gpj4-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
@@ -889,28 +889,28 @@ &spi2_bus {
&pinctrl_3 {
/* Drive SPI chip select at x2 for better integrity */
- ec_spi_cs: ec-spi-cs {
+ ec_spi_cs: ec-spi-cs-pins {
samsung,pins = "gpb1-2";
samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
};
- usb300_vbus_en: usb300-vbus-en {
+ usb300_vbus_en: usb300-vbus-en-pins {
samsung,pins = "gph0-0";
samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
};
- usb301_vbus_en: usb301-vbus-en {
+ usb301_vbus_en: usb301-vbus-en-pins {
samsung,pins = "gph0-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
};
- pmic_selb: pmic-selb {
+ pmic_selb: pmic-selb-pins {
samsung,pins = "gph0-2", "gph0-3", "gph0-4", "gph0-5",
"gph0-6";
samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
--
2.32.0
Align the pin controller related nodes with dtschema. No functional
change expected.
The macros used to define pin configuration do not work well with node
name suffix "-pin" or prefix "pin-", so level of indirection via second
macro is needed. For similar reason pcie-wlanen has to stop using the
macro.
Signed-off-by: Krzysztof Kozlowski <[email protected]>
---
.../boot/dts/exynos/exynos5433-pinctrl.dtsi | 211 +++++++-------
.../dts/exynos/exynos5433-tm2-common.dtsi | 259 +++++++++---------
2 files changed, 241 insertions(+), 229 deletions(-)
diff --git a/arch/arm64/boot/dts/exynos/exynos5433-pinctrl.dtsi b/arch/arm64/boot/dts/exynos/exynos5433-pinctrl.dtsi
index 32a6518517e5..4b46af3e164d 100644
--- a/arch/arm64/boot/dts/exynos/exynos5433-pinctrl.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynos5433-pinctrl.dtsi
@@ -11,16 +11,25 @@
#include <dt-bindings/pinctrl/samsung.h>
-#define PIN(_func, _pin, _pull, _drv) \
- _pin { \
+#define PIN(_pin, _func, _pull, _drv) \
+ pin- ## _pin { \
samsung,pins = #_pin; \
samsung,pin-function = <EXYNOS_PIN_FUNC_ ##_func>; \
samsung,pin-pud = <EXYNOS_PIN_PULL_ ##_pull>; \
samsung,pin-drv = <EXYNOS5433_PIN_DRV_ ##_drv>; \
}
+#define PIN_IN(_pin, _pull, _drv) \
+ PIN(_pin, INPUT, _pull, _drv)
+
+#define PIN_OT(_pin, _pull, _drv) \
+ PIN(_pin, OUTPUT, _pull, _drv)
+
+#define PIN_F2(_pin, _pull, _drv) \
+ PIN(_pin, 2, _pull, _drv)
+
&pinctrl_alive {
- gpa0: gpa0 {
+ gpa0: gpa0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -37,7 +46,7 @@ gpa0: gpa0 {
#interrupt-cells = <2>;
};
- gpa1: gpa1 {
+ gpa1: gpa1-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -54,7 +63,7 @@ gpa1: gpa1 {
#interrupt-cells = <2>;
};
- gpa2: gpa2 {
+ gpa2: gpa2-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -62,7 +71,7 @@ gpa2: gpa2 {
#interrupt-cells = <2>;
};
- gpa3: gpa3 {
+ gpa3: gpa3-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -70,7 +79,7 @@ gpa3: gpa3 {
#interrupt-cells = <2>;
};
- gpf1: gpf1 {
+ gpf1: gpf1-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -78,7 +87,7 @@ gpf1: gpf1 {
#interrupt-cells = <2>;
};
- gpf2: gpf2 {
+ gpf2: gpf2-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -86,7 +95,7 @@ gpf2: gpf2 {
#interrupt-cells = <2>;
};
- gpf3: gpf3 {
+ gpf3: gpf3-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -94,7 +103,7 @@ gpf3: gpf3 {
#interrupt-cells = <2>;
};
- gpf4: gpf4 {
+ gpf4: gpf4-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -102,7 +111,7 @@ gpf4: gpf4 {
#interrupt-cells = <2>;
};
- gpf5: gpf5 {
+ gpf5: gpf5-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -112,7 +121,7 @@ gpf5: gpf5 {
};
&pinctrl_aud {
- gpz0: gpz0 {
+ gpz0: gpz0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -120,7 +129,7 @@ gpz0: gpz0 {
#interrupt-cells = <2>;
};
- gpz1: gpz1 {
+ gpz1: gpz1-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -128,7 +137,7 @@ gpz1: gpz1 {
#interrupt-cells = <2>;
};
- i2s0_bus: i2s0-bus {
+ i2s0_bus: i2s0-bus-pins {
samsung,pins = "gpz0-0", "gpz0-1", "gpz0-2", "gpz0-3",
"gpz0-4", "gpz0-5", "gpz0-6";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
@@ -136,14 +145,14 @@ i2s0_bus: i2s0-bus {
samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
};
- pcm0_bus: pcm0-bus {
+ pcm0_bus: pcm0-bus-pins {
samsung,pins = "gpz1-0", "gpz1-1", "gpz1-2", "gpz1-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
};
- uart_aud_bus: uart-aud-bus {
+ uart_aud_bus: uart-aud-bus-pins {
samsung,pins = "gpz1-3", "gpz1-2", "gpz1-1", "gpz1-0";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
@@ -152,7 +161,7 @@ uart_aud_bus: uart-aud-bus {
};
&pinctrl_cpif {
- gpv6: gpv6 {
+ gpv6: gpv6-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -162,7 +171,7 @@ gpv6: gpv6 {
};
&pinctrl_ese {
- gpj2: gpj2 {
+ gpj2: gpj2-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -172,7 +181,7 @@ gpj2: gpj2 {
};
&pinctrl_finger {
- gpd5: gpd5 {
+ gpd5: gpd5-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -180,14 +189,14 @@ gpd5: gpd5 {
#interrupt-cells = <2>;
};
- spi2_bus: spi2-bus {
+ spi2_bus: spi2-bus-pins {
samsung,pins = "gpd5-0", "gpd5-2", "gpd5-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
};
- hs_i2c6_bus: hs-i2c6-bus {
+ hs_i2c6_bus: hs-i2c6-bus-pins {
samsung,pins = "gpd5-3", "gpd5-2";
samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
@@ -196,7 +205,7 @@ hs_i2c6_bus: hs-i2c6-bus {
};
&pinctrl_fsys {
- gph1: gph1 {
+ gph1: gph1-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -204,7 +213,7 @@ gph1: gph1 {
#interrupt-cells = <2>;
};
- gpr4: gpr4 {
+ gpr4: gpr4-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -212,7 +221,7 @@ gpr4: gpr4 {
#interrupt-cells = <2>;
};
- gpr0: gpr0 {
+ gpr0: gpr0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -220,7 +229,7 @@ gpr0: gpr0 {
#interrupt-cells = <2>;
};
- gpr1: gpr1 {
+ gpr1: gpr1-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -228,7 +237,7 @@ gpr1: gpr1 {
#interrupt-cells = <2>;
};
- gpr2: gpr2 {
+ gpr2: gpr2-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -236,7 +245,7 @@ gpr2: gpr2 {
#interrupt-cells = <2>;
};
- gpr3: gpr3 {
+ gpr3: gpr3-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -244,139 +253,139 @@ gpr3: gpr3 {
#interrupt-cells = <2>;
};
- sd0_clk: sd0-clk {
+ sd0_clk: sd0-clk-pins {
samsung,pins = "gpr0-0";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR4>;
};
- sd0_cmd: sd0-cmd {
+ sd0_cmd: sd0-cmd-pins {
samsung,pins = "gpr0-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR4>;
};
- sd0_rdqs: sd0-rdqs {
+ sd0_rdqs: sd0-rdqs-pins {
samsung,pins = "gpr0-2";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR4>;
};
- sd0_qrdy: sd0-qrdy {
+ sd0_qrdy: sd0-qrdy-pins {
samsung,pins = "gpr0-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR4>;
};
- sd0_bus1: sd0-bus-width1 {
+ sd0_bus1: sd0-bus-width1-pins {
samsung,pins = "gpr1-0";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR4>;
};
- sd0_bus4: sd0-bus-width4 {
+ sd0_bus4: sd0-bus-width4-pins {
samsung,pins = "gpr1-1", "gpr1-2", "gpr1-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR4>;
};
- sd0_bus8: sd0-bus-width8 {
+ sd0_bus8: sd0-bus-width8-pins {
samsung,pins = "gpr1-4", "gpr1-5", "gpr1-6", "gpr1-7";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR4>;
};
- sd1_clk: sd1-clk {
+ sd1_clk: sd1-clk-pins {
samsung,pins = "gpr2-0";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR4>;
};
- sd1_cmd: sd1-cmd {
+ sd1_cmd: sd1-cmd-pins {
samsung,pins = "gpr2-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR4>;
};
- sd1_bus1: sd1-bus-width1 {
+ sd1_bus1: sd1-bus-width1-pins {
samsung,pins = "gpr3-0";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR4>;
};
- sd1_bus4: sd1-bus-width4 {
+ sd1_bus4: sd1-bus-width4-pins {
samsung,pins = "gpr3-1", "gpr3-2", "gpr3-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR4>;
};
- sd1_bus8: sd1-bus-width8 {
+ sd1_bus8: sd1-bus-width8-pins {
samsung,pins = "gpr3-4", "gpr3-5", "gpr3-6", "gpr3-7";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR4>;
};
- pcie_bus: pcie_bus {
+ pcie_bus: pcie-bus-pins {
samsung,pins = "gpr3-4", "gpr3-5", "gpr3-6";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
};
- sd2_clk: sd2-clk {
+ sd2_clk: sd2-clk-pins {
samsung,pins = "gpr4-0";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR4>;
};
- sd2_cmd: sd2-cmd {
+ sd2_cmd: sd2-cmd-pins {
samsung,pins = "gpr4-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR4>;
};
- sd2_cd: sd2-cd {
+ sd2_cd: sd2-cd-pins {
samsung,pins = "gpr4-2";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR4>;
};
- sd2_bus1: sd2-bus-width1 {
+ sd2_bus1: sd2-bus-width1-pins {
samsung,pins = "gpr4-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR4>;
};
- sd2_bus4: sd2-bus-width4 {
+ sd2_bus4: sd2-bus-width4-pins {
samsung,pins = "gpr4-4", "gpr4-5", "gpr4-6";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR4>;
};
- sd2_clk_output: sd2-clk-output {
+ sd2_clk_output: sd2-clk-output-pins {
samsung,pins = "gpr4-0";
samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR3>;
};
- sd2_cmd_output: sd2-cmd-output {
+ sd2_cmd_output: sd2-cmd-output-pins {
samsung,pins = "gpr4-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
@@ -385,7 +394,7 @@ sd2_cmd_output: sd2-cmd-output {
};
&pinctrl_imem {
- gpf0: gpf0 {
+ gpf0: gpf0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -395,7 +404,7 @@ gpf0: gpf0 {
};
&pinctrl_nfc {
- gpj0: gpj0 {
+ gpj0: gpj0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -403,7 +412,7 @@ gpj0: gpj0 {
#interrupt-cells = <2>;
};
- hs_i2c4_bus: hs-i2c4-bus {
+ hs_i2c4_bus: hs-i2c4-bus-pins {
samsung,pins = "gpj0-1", "gpj0-0";
samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
@@ -412,7 +421,7 @@ hs_i2c4_bus: hs-i2c4-bus {
};
&pinctrl_peric {
- gpv7: gpv7 {
+ gpv7: gpv7-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -420,7 +429,7 @@ gpv7: gpv7 {
#interrupt-cells = <2>;
};
- gpb0: gpb0 {
+ gpb0: gpb0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -428,7 +437,7 @@ gpb0: gpb0 {
#interrupt-cells = <2>;
};
- gpc0: gpc0 {
+ gpc0: gpc0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -436,7 +445,7 @@ gpc0: gpc0 {
#interrupt-cells = <2>;
};
- gpc1: gpc1 {
+ gpc1: gpc1-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -444,7 +453,7 @@ gpc1: gpc1 {
#interrupt-cells = <2>;
};
- gpc2: gpc2 {
+ gpc2: gpc2-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -452,7 +461,7 @@ gpc2: gpc2 {
#interrupt-cells = <2>;
};
- gpc3: gpc3 {
+ gpc3: gpc3-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -460,7 +469,7 @@ gpc3: gpc3 {
#interrupt-cells = <2>;
};
- gpg0: gpg0 {
+ gpg0: gpg0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -468,7 +477,7 @@ gpg0: gpg0 {
#interrupt-cells = <2>;
};
- gpd0: gpd0 {
+ gpd0: gpd0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -476,7 +485,7 @@ gpd0: gpd0 {
#interrupt-cells = <2>;
};
- gpd1: gpd1 {
+ gpd1: gpd1-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -484,7 +493,7 @@ gpd1: gpd1 {
#interrupt-cells = <2>;
};
- gpd2: gpd2 {
+ gpd2: gpd2-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -492,7 +501,7 @@ gpd2: gpd2 {
#interrupt-cells = <2>;
};
- gpd4: gpd4 {
+ gpd4: gpd4-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -500,7 +509,7 @@ gpd4: gpd4 {
#interrupt-cells = <2>;
};
- gpd8: gpd8 {
+ gpd8: gpd8-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -508,7 +517,7 @@ gpd8: gpd8 {
#interrupt-cells = <2>;
};
- gpd6: gpd6 {
+ gpd6: gpd6-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -516,7 +525,7 @@ gpd6: gpd6 {
#interrupt-cells = <2>;
};
- gpd7: gpd7 {
+ gpd7: gpd7-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -524,7 +533,7 @@ gpd7: gpd7 {
#interrupt-cells = <2>;
};
- gpg1: gpg1 {
+ gpg1: gpg1-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -532,7 +541,7 @@ gpg1: gpg1 {
#interrupt-cells = <2>;
};
- gpg2: gpg2 {
+ gpg2: gpg2-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -540,7 +549,7 @@ gpg2: gpg2 {
#interrupt-cells = <2>;
};
- gpg3: gpg3 {
+ gpg3: gpg3-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -548,21 +557,21 @@ gpg3: gpg3 {
#interrupt-cells = <2>;
};
- hs_i2c8_bus: hs-i2c8-bus {
+ hs_i2c8_bus: hs-i2c8-bus-pins {
samsung,pins = "gpb0-1", "gpb0-0";
samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
};
- hs_i2c9_bus: hs-i2c9-bus {
+ hs_i2c9_bus: hs-i2c9-bus-pins {
samsung,pins = "gpb0-3", "gpb0-2";
samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
};
- i2s1_bus: i2s1-bus {
+ i2s1_bus: i2s1-bus-pins {
samsung,pins = "gpd4-0", "gpd4-1", "gpd4-2",
"gpd4-3", "gpd4-4";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
@@ -570,7 +579,7 @@ i2s1_bus: i2s1-bus {
samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
};
- pcm1_bus: pcm1-bus {
+ pcm1_bus: pcm1-bus-pins {
samsung,pins = "gpd4-0", "gpd4-1", "gpd4-2",
"gpd4-3", "gpd4-4";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
@@ -578,193 +587,193 @@ pcm1_bus: pcm1-bus {
samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
};
- spdif_bus: spdif-bus {
+ spdif_bus: spdif-bus-pins {
samsung,pins = "gpd4-3", "gpd4-4";
samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
};
- fimc_is_spi_pin0: fimc-is-spi-pin0 {
+ fimc_is_spi_pin0: fimc-is-spi-pin0-pins {
samsung,pins = "gpc3-3", "gpc3-2", "gpc3-1", "gpc3-0";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
};
- fimc_is_spi_pin1: fimc-is-spi-pin1 {
+ fimc_is_spi_pin1: fimc-is-spi-pin1-pins {
samsung,pins = "gpc3-7", "gpc3-6", "gpc3-5", "gpc3-4";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
};
- uart0_bus: uart0-bus {
+ uart0_bus: uart0-bus-pins {
samsung,pins = "gpd0-3", "gpd0-2", "gpd0-1", "gpd0-0";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
};
- hs_i2c2_bus: hs-i2c2-bus {
+ hs_i2c2_bus: hs-i2c2-bus-pins {
samsung,pins = "gpd0-3", "gpd0-2";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
};
- uart2_bus: uart2-bus {
+ uart2_bus: uart2-bus-pins {
samsung,pins = "gpd1-5", "gpd1-4";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
};
- uart1_bus: uart1-bus {
+ uart1_bus: uart1-bus-pins {
samsung,pins = "gpd1-3", "gpd1-2", "gpd1-1", "gpd1-0";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
};
- hs_i2c3_bus: hs-i2c3-bus {
+ hs_i2c3_bus: hs-i2c3-bus-pins {
samsung,pins = "gpd1-3", "gpd1-2";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
};
- hs_i2c0_bus: hs-i2c0-bus {
+ hs_i2c0_bus: hs-i2c0-bus-pins {
samsung,pins = "gpd2-1", "gpd2-0";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
};
- hs_i2c1_bus: hs-i2c1-bus {
+ hs_i2c1_bus: hs-i2c1-bus-pins {
samsung,pins = "gpd2-3", "gpd2-2";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
};
- pwm0_out: pwm0-out {
+ pwm0_out: pwm0-out-pins {
samsung,pins = "gpd2-4";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
};
- pwm1_out: pwm1-out {
+ pwm1_out: pwm1-out-pins {
samsung,pins = "gpd2-5";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
};
- pwm2_out: pwm2-out {
+ pwm2_out: pwm2-out-pins {
samsung,pins = "gpd2-6";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
};
- pwm3_out: pwm3-out {
+ pwm3_out: pwm3-out-pins {
samsung,pins = "gpd2-7";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
};
- spi1_bus: spi1-bus {
+ spi1_bus: spi1-bus-pins {
samsung,pins = "gpd6-2", "gpd6-4", "gpd6-5";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
};
- hs_i2c7_bus: hs-i2c7-bus {
+ hs_i2c7_bus: hs-i2c7-bus-pins {
samsung,pins = "gpd2-7", "gpd2-6";
samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
};
- spi0_bus: spi0-bus {
+ spi0_bus: spi0-bus-pins {
samsung,pins = "gpd8-0", "gpd6-0", "gpd6-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
};
- hs_i2c10_bus: hs-i2c10-bus {
+ hs_i2c10_bus: hs-i2c10-bus-pins {
samsung,pins = "gpg3-1", "gpg3-0";
samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
};
- hs_i2c11_bus: hs-i2c11-bus {
+ hs_i2c11_bus: hs-i2c11-bus-pins {
samsung,pins = "gpg3-3", "gpg3-2";
samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
};
- spi3_bus: spi3-bus {
+ spi3_bus: spi3-bus-pins {
samsung,pins = "gpg3-4", "gpg3-6", "gpg3-7";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
};
- spi4_bus: spi4-bus {
+ spi4_bus: spi4-bus-pins {
samsung,pins = "gpv7-1", "gpv7-3", "gpv7-4";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
};
- fimc_is_uart: fimc-is-uart {
+ fimc_is_uart: fimc-is-uart-pins {
samsung,pins = "gpc1-1", "gpc0-7";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
};
- fimc_is_ch0_i2c: fimc-is-ch0_i2c {
+ fimc_is_ch0_i2c: fimc-is-ch0-i2c-pins {
samsung,pins = "gpc2-1", "gpc2-0";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
};
- fimc_is_ch0_mclk: fimc-is-ch0_mclk {
+ fimc_is_ch0_mclk: fimc-is-ch0-mclk-pins {
samsung,pins = "gpd7-0";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
};
- fimc_is_ch1_i2c: fimc-is-ch1-i2c {
+ fimc_is_ch1_i2c: fimc-is-ch1-i2c-pins {
samsung,pins = "gpc2-3", "gpc2-2";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
};
- fimc_is_ch1_mclk: fimc-is-ch1-mclk {
+ fimc_is_ch1_mclk: fimc-is-ch1-mclk-pins {
samsung,pins = "gpd7-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
};
- fimc_is_ch2_i2c: fimc-is-ch2-i2c {
+ fimc_is_ch2_i2c: fimc-is-ch2-i2c-pins {
samsung,pins = "gpc2-5", "gpc2-4";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
};
- fimc_is_ch2_mclk: fimc-is-ch2-mclk {
+ fimc_is_ch2_mclk: fimc-is-ch2-mclk-pins {
samsung,pins = "gpd7-2";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
@@ -773,7 +782,7 @@ fimc_is_ch2_mclk: fimc-is-ch2-mclk {
};
&pinctrl_touch {
- gpj1: gpj1 {
+ gpj1: gpj1-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -781,7 +790,7 @@ gpj1: gpj1 {
#interrupt-cells = <2>;
};
- hs_i2c5_bus: hs-i2c5-bus {
+ hs_i2c5_bus: hs-i2c5-bus-pins {
samsung,pins = "gpj1-1", "gpj1-0";
samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi b/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi
index cbcc01a66aab..be1b6b7da059 100644
--- a/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi
@@ -1011,80 +1011,80 @@ &pinctrl_alive {
pinctrl-0 = <&initial_alive>;
initial_alive: initial-state {
- PIN(INPUT, gpa0-0, DOWN, FAST_SR1);
- PIN(INPUT, gpa0-1, NONE, FAST_SR1);
- PIN(INPUT, gpa0-2, DOWN, FAST_SR1);
- PIN(INPUT, gpa0-3, NONE, FAST_SR1);
- PIN(INPUT, gpa0-4, NONE, FAST_SR1);
- PIN(INPUT, gpa0-5, DOWN, FAST_SR1);
- PIN(INPUT, gpa0-6, NONE, FAST_SR1);
- PIN(INPUT, gpa0-7, NONE, FAST_SR1);
-
- PIN(INPUT, gpa1-0, UP, FAST_SR1);
- PIN(INPUT, gpa1-1, UP, FAST_SR1);
- PIN(INPUT, gpa1-2, NONE, FAST_SR1);
- PIN(INPUT, gpa1-3, DOWN, FAST_SR1);
- PIN(INPUT, gpa1-4, DOWN, FAST_SR1);
- PIN(INPUT, gpa1-5, NONE, FAST_SR1);
- PIN(INPUT, gpa1-6, NONE, FAST_SR1);
- PIN(INPUT, gpa1-7, NONE, FAST_SR1);
-
- PIN(INPUT, gpa2-0, NONE, FAST_SR1);
- PIN(INPUT, gpa2-1, NONE, FAST_SR1);
- PIN(INPUT, gpa2-2, NONE, FAST_SR1);
- PIN(INPUT, gpa2-3, DOWN, FAST_SR1);
- PIN(INPUT, gpa2-4, NONE, FAST_SR1);
- PIN(INPUT, gpa2-5, DOWN, FAST_SR1);
- PIN(INPUT, gpa2-6, DOWN, FAST_SR1);
- PIN(INPUT, gpa2-7, NONE, FAST_SR1);
-
- PIN(INPUT, gpa3-0, DOWN, FAST_SR1);
- PIN(INPUT, gpa3-1, DOWN, FAST_SR1);
- PIN(INPUT, gpa3-2, NONE, FAST_SR1);
- PIN(INPUT, gpa3-3, DOWN, FAST_SR1);
- PIN(INPUT, gpa3-4, NONE, FAST_SR1);
- PIN(INPUT, gpa3-5, DOWN, FAST_SR1);
- PIN(INPUT, gpa3-6, DOWN, FAST_SR1);
- PIN(INPUT, gpa3-7, DOWN, FAST_SR1);
-
- PIN(INPUT, gpf1-0, NONE, FAST_SR1);
- PIN(INPUT, gpf1-1, NONE, FAST_SR1);
- PIN(INPUT, gpf1-2, DOWN, FAST_SR1);
- PIN(INPUT, gpf1-4, UP, FAST_SR1);
- PIN(OUTPUT, gpf1-5, NONE, FAST_SR1);
- PIN(INPUT, gpf1-6, DOWN, FAST_SR1);
- PIN(INPUT, gpf1-7, DOWN, FAST_SR1);
-
- PIN(INPUT, gpf2-0, DOWN, FAST_SR1);
- PIN(INPUT, gpf2-1, DOWN, FAST_SR1);
- PIN(INPUT, gpf2-2, DOWN, FAST_SR1);
- PIN(INPUT, gpf2-3, DOWN, FAST_SR1);
-
- PIN(INPUT, gpf3-0, DOWN, FAST_SR1);
- PIN(INPUT, gpf3-1, DOWN, FAST_SR1);
- PIN(INPUT, gpf3-2, NONE, FAST_SR1);
- PIN(INPUT, gpf3-3, DOWN, FAST_SR1);
-
- PIN(INPUT, gpf4-0, DOWN, FAST_SR1);
- PIN(INPUT, gpf4-1, DOWN, FAST_SR1);
- PIN(INPUT, gpf4-2, DOWN, FAST_SR1);
- PIN(INPUT, gpf4-3, DOWN, FAST_SR1);
- PIN(INPUT, gpf4-4, DOWN, FAST_SR1);
- PIN(INPUT, gpf4-5, DOWN, FAST_SR1);
- PIN(INPUT, gpf4-6, DOWN, FAST_SR1);
- PIN(INPUT, gpf4-7, DOWN, FAST_SR1);
-
- PIN(INPUT, gpf5-0, DOWN, FAST_SR1);
- PIN(INPUT, gpf5-1, DOWN, FAST_SR1);
- PIN(INPUT, gpf5-2, DOWN, FAST_SR1);
- PIN(INPUT, gpf5-3, DOWN, FAST_SR1);
- PIN(OUTPUT, gpf5-4, NONE, FAST_SR1);
- PIN(INPUT, gpf5-5, DOWN, FAST_SR1);
- PIN(INPUT, gpf5-6, DOWN, FAST_SR1);
- PIN(INPUT, gpf5-7, DOWN, FAST_SR1);
+ PIN_IN(gpa0-0, DOWN, FAST_SR1);
+ PIN_IN(gpa0-1, NONE, FAST_SR1);
+ PIN_IN(gpa0-2, DOWN, FAST_SR1);
+ PIN_IN(gpa0-3, NONE, FAST_SR1);
+ PIN_IN(gpa0-4, NONE, FAST_SR1);
+ PIN_IN(gpa0-5, DOWN, FAST_SR1);
+ PIN_IN(gpa0-6, NONE, FAST_SR1);
+ PIN_IN(gpa0-7, NONE, FAST_SR1);
+
+ PIN_IN(gpa1-0, UP, FAST_SR1);
+ PIN_IN(gpa1-1, UP, FAST_SR1);
+ PIN_IN(gpa1-2, NONE, FAST_SR1);
+ PIN_IN(gpa1-3, DOWN, FAST_SR1);
+ PIN_IN(gpa1-4, DOWN, FAST_SR1);
+ PIN_IN(gpa1-5, NONE, FAST_SR1);
+ PIN_IN(gpa1-6, NONE, FAST_SR1);
+ PIN_IN(gpa1-7, NONE, FAST_SR1);
+
+ PIN_IN(gpa2-0, NONE, FAST_SR1);
+ PIN_IN(gpa2-1, NONE, FAST_SR1);
+ PIN_IN(gpa2-2, NONE, FAST_SR1);
+ PIN_IN(gpa2-3, DOWN, FAST_SR1);
+ PIN_IN(gpa2-4, NONE, FAST_SR1);
+ PIN_IN(gpa2-5, DOWN, FAST_SR1);
+ PIN_IN(gpa2-6, DOWN, FAST_SR1);
+ PIN_IN(gpa2-7, NONE, FAST_SR1);
+
+ PIN_IN(gpa3-0, DOWN, FAST_SR1);
+ PIN_IN(gpa3-1, DOWN, FAST_SR1);
+ PIN_IN(gpa3-2, NONE, FAST_SR1);
+ PIN_IN(gpa3-3, DOWN, FAST_SR1);
+ PIN_IN(gpa3-4, NONE, FAST_SR1);
+ PIN_IN(gpa3-5, DOWN, FAST_SR1);
+ PIN_IN(gpa3-6, DOWN, FAST_SR1);
+ PIN_IN(gpa3-7, DOWN, FAST_SR1);
+
+ PIN_IN(gpf1-0, NONE, FAST_SR1);
+ PIN_IN(gpf1-1, NONE, FAST_SR1);
+ PIN_IN(gpf1-2, DOWN, FAST_SR1);
+ PIN_IN(gpf1-4, UP, FAST_SR1);
+ PIN_OT(gpf1-5, NONE, FAST_SR1);
+ PIN_IN(gpf1-6, DOWN, FAST_SR1);
+ PIN_IN(gpf1-7, DOWN, FAST_SR1);
+
+ PIN_IN(gpf2-0, DOWN, FAST_SR1);
+ PIN_IN(gpf2-1, DOWN, FAST_SR1);
+ PIN_IN(gpf2-2, DOWN, FAST_SR1);
+ PIN_IN(gpf2-3, DOWN, FAST_SR1);
+
+ PIN_IN(gpf3-0, DOWN, FAST_SR1);
+ PIN_IN(gpf3-1, DOWN, FAST_SR1);
+ PIN_IN(gpf3-2, NONE, FAST_SR1);
+ PIN_IN(gpf3-3, DOWN, FAST_SR1);
+
+ PIN_IN(gpf4-0, DOWN, FAST_SR1);
+ PIN_IN(gpf4-1, DOWN, FAST_SR1);
+ PIN_IN(gpf4-2, DOWN, FAST_SR1);
+ PIN_IN(gpf4-3, DOWN, FAST_SR1);
+ PIN_IN(gpf4-4, DOWN, FAST_SR1);
+ PIN_IN(gpf4-5, DOWN, FAST_SR1);
+ PIN_IN(gpf4-6, DOWN, FAST_SR1);
+ PIN_IN(gpf4-7, DOWN, FAST_SR1);
+
+ PIN_IN(gpf5-0, DOWN, FAST_SR1);
+ PIN_IN(gpf5-1, DOWN, FAST_SR1);
+ PIN_IN(gpf5-2, DOWN, FAST_SR1);
+ PIN_IN(gpf5-3, DOWN, FAST_SR1);
+ PIN_OT(gpf5-4, NONE, FAST_SR1);
+ PIN_IN(gpf5-5, DOWN, FAST_SR1);
+ PIN_IN(gpf5-6, DOWN, FAST_SR1);
+ PIN_IN(gpf5-7, DOWN, FAST_SR1);
};
- te_irq: te-irq {
+ te_irq: te-irq-pins {
samsung,pins = "gpf1-3";
samsung,pin-function = <0xf>;
};
@@ -1095,8 +1095,8 @@ &pinctrl_cpif {
pinctrl-0 = <&initial_cpif>;
initial_cpif: initial-state {
- PIN(INPUT, gpv6-0, DOWN, FAST_SR1);
- PIN(INPUT, gpv6-1, DOWN, FAST_SR1);
+ PIN_IN(gpv6-0, DOWN, FAST_SR1);
+ PIN_IN(gpv6-1, DOWN, FAST_SR1);
};
};
@@ -1104,13 +1104,16 @@ &pinctrl_ese {
pinctrl-names = "default";
pinctrl-0 = <&initial_ese>;
- pcie_wlanen: pcie-wlanen {
- PIN(INPUT, gpj2-0, UP, FAST_SR4);
+ pcie_wlanen: pcie-wlanen-pins {
+ samsung,pins = "gpj2-0";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+ samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR4>;
};
initial_ese: initial-state {
- PIN(INPUT, gpj2-1, DOWN, FAST_SR1);
- PIN(INPUT, gpj2-2, DOWN, FAST_SR1);
+ PIN_IN(gpj2-1, DOWN, FAST_SR1);
+ PIN_IN(gpj2-2, DOWN, FAST_SR1);
};
};
@@ -1119,11 +1122,11 @@ &pinctrl_fsys {
pinctrl-0 = <&initial_fsys>;
initial_fsys: initial-state {
- PIN(INPUT, gpr3-0, NONE, FAST_SR1);
- PIN(INPUT, gpr3-1, DOWN, FAST_SR1);
- PIN(INPUT, gpr3-2, DOWN, FAST_SR1);
- PIN(INPUT, gpr3-3, DOWN, FAST_SR1);
- PIN(INPUT, gpr3-7, NONE, FAST_SR1);
+ PIN_IN(gpr3-0, NONE, FAST_SR1);
+ PIN_IN(gpr3-1, DOWN, FAST_SR1);
+ PIN_IN(gpr3-2, DOWN, FAST_SR1);
+ PIN_IN(gpr3-3, DOWN, FAST_SR1);
+ PIN_IN(gpr3-7, NONE, FAST_SR1);
};
};
@@ -1132,14 +1135,14 @@ &pinctrl_imem {
pinctrl-0 = <&initial_imem>;
initial_imem: initial-state {
- PIN(INPUT, gpf0-0, UP, FAST_SR1);
- PIN(INPUT, gpf0-1, UP, FAST_SR1);
- PIN(INPUT, gpf0-2, DOWN, FAST_SR1);
- PIN(INPUT, gpf0-3, UP, FAST_SR1);
- PIN(INPUT, gpf0-4, DOWN, FAST_SR1);
- PIN(INPUT, gpf0-5, NONE, FAST_SR1);
- PIN(INPUT, gpf0-6, DOWN, FAST_SR1);
- PIN(INPUT, gpf0-7, UP, FAST_SR1);
+ PIN_IN(gpf0-0, UP, FAST_SR1);
+ PIN_IN(gpf0-1, UP, FAST_SR1);
+ PIN_IN(gpf0-2, DOWN, FAST_SR1);
+ PIN_IN(gpf0-3, UP, FAST_SR1);
+ PIN_IN(gpf0-4, DOWN, FAST_SR1);
+ PIN_IN(gpf0-5, NONE, FAST_SR1);
+ PIN_IN(gpf0-6, DOWN, FAST_SR1);
+ PIN_IN(gpf0-7, UP, FAST_SR1);
};
};
@@ -1148,7 +1151,7 @@ &pinctrl_nfc {
pinctrl-0 = <&initial_nfc>;
initial_nfc: initial-state {
- PIN(INPUT, gpj0-2, DOWN, FAST_SR1);
+ PIN_IN(gpj0-2, DOWN, FAST_SR1);
};
};
@@ -1157,53 +1160,53 @@ &pinctrl_peric {
pinctrl-0 = <&initial_peric>;
initial_peric: initial-state {
- PIN(INPUT, gpv7-0, DOWN, FAST_SR1);
- PIN(INPUT, gpv7-1, DOWN, FAST_SR1);
- PIN(INPUT, gpv7-2, NONE, FAST_SR1);
- PIN(INPUT, gpv7-3, DOWN, FAST_SR1);
- PIN(INPUT, gpv7-4, DOWN, FAST_SR1);
- PIN(INPUT, gpv7-5, DOWN, FAST_SR1);
+ PIN_IN(gpv7-0, DOWN, FAST_SR1);
+ PIN_IN(gpv7-1, DOWN, FAST_SR1);
+ PIN_IN(gpv7-2, NONE, FAST_SR1);
+ PIN_IN(gpv7-3, DOWN, FAST_SR1);
+ PIN_IN(gpv7-4, DOWN, FAST_SR1);
+ PIN_IN(gpv7-5, DOWN, FAST_SR1);
- PIN(INPUT, gpb0-4, DOWN, FAST_SR1);
+ PIN_IN(gpb0-4, DOWN, FAST_SR1);
- PIN(INPUT, gpc0-2, DOWN, FAST_SR1);
- PIN(INPUT, gpc0-5, DOWN, FAST_SR1);
- PIN(INPUT, gpc0-7, DOWN, FAST_SR1);
+ PIN_IN(gpc0-2, DOWN, FAST_SR1);
+ PIN_IN(gpc0-5, DOWN, FAST_SR1);
+ PIN_IN(gpc0-7, DOWN, FAST_SR1);
- PIN(INPUT, gpc1-1, DOWN, FAST_SR1);
+ PIN_IN(gpc1-1, DOWN, FAST_SR1);
- PIN(INPUT, gpc3-4, NONE, FAST_SR1);
- PIN(INPUT, gpc3-5, NONE, FAST_SR1);
- PIN(INPUT, gpc3-6, NONE, FAST_SR1);
- PIN(INPUT, gpc3-7, NONE, FAST_SR1);
+ PIN_IN(gpc3-4, NONE, FAST_SR1);
+ PIN_IN(gpc3-5, NONE, FAST_SR1);
+ PIN_IN(gpc3-6, NONE, FAST_SR1);
+ PIN_IN(gpc3-7, NONE, FAST_SR1);
- PIN(OUTPUT, gpg0-0, NONE, FAST_SR1);
- PIN(2, gpg0-1, DOWN, FAST_SR1);
+ PIN_OT(gpg0-0, NONE, FAST_SR1);
+ PIN_F2(gpg0-1, DOWN, FAST_SR1);
- PIN(INPUT, gpd2-5, DOWN, FAST_SR1);
+ PIN_IN(gpd2-5, DOWN, FAST_SR1);
- PIN(INPUT, gpd4-0, NONE, FAST_SR1);
- PIN(INPUT, gpd4-1, DOWN, FAST_SR1);
- PIN(INPUT, gpd4-2, DOWN, FAST_SR1);
- PIN(INPUT, gpd4-3, DOWN, FAST_SR1);
- PIN(INPUT, gpd4-4, DOWN, FAST_SR1);
+ PIN_IN(gpd4-0, NONE, FAST_SR1);
+ PIN_IN(gpd4-1, DOWN, FAST_SR1);
+ PIN_IN(gpd4-2, DOWN, FAST_SR1);
+ PIN_IN(gpd4-3, DOWN, FAST_SR1);
+ PIN_IN(gpd4-4, DOWN, FAST_SR1);
- PIN(INPUT, gpd6-3, DOWN, FAST_SR1);
+ PIN_IN(gpd6-3, DOWN, FAST_SR1);
- PIN(INPUT, gpd8-1, UP, FAST_SR1);
+ PIN_IN(gpd8-1, UP, FAST_SR1);
- PIN(INPUT, gpg1-0, DOWN, FAST_SR1);
- PIN(INPUT, gpg1-1, DOWN, FAST_SR1);
- PIN(INPUT, gpg1-2, DOWN, FAST_SR1);
- PIN(INPUT, gpg1-3, DOWN, FAST_SR1);
- PIN(INPUT, gpg1-4, DOWN, FAST_SR1);
+ PIN_IN(gpg1-0, DOWN, FAST_SR1);
+ PIN_IN(gpg1-1, DOWN, FAST_SR1);
+ PIN_IN(gpg1-2, DOWN, FAST_SR1);
+ PIN_IN(gpg1-3, DOWN, FAST_SR1);
+ PIN_IN(gpg1-4, DOWN, FAST_SR1);
- PIN(INPUT, gpg2-0, DOWN, FAST_SR1);
- PIN(INPUT, gpg2-1, DOWN, FAST_SR1);
+ PIN_IN(gpg2-0, DOWN, FAST_SR1);
+ PIN_IN(gpg2-1, DOWN, FAST_SR1);
- PIN(INPUT, gpg3-0, DOWN, FAST_SR1);
- PIN(INPUT, gpg3-1, DOWN, FAST_SR1);
- PIN(INPUT, gpg3-5, DOWN, FAST_SR1);
+ PIN_IN(gpg3-0, DOWN, FAST_SR1);
+ PIN_IN(gpg3-1, DOWN, FAST_SR1);
+ PIN_IN(gpg3-5, DOWN, FAST_SR1);
};
};
@@ -1212,7 +1215,7 @@ &pinctrl_touch {
pinctrl-0 = <&initial_touch>;
initial_touch: initial-state {
- PIN(INPUT, gpj1-2, DOWN, FAST_SR1);
+ PIN_IN(gpj1-2, DOWN, FAST_SR1);
};
};
--
2.32.0
Align the pin controller related nodes with dtschema. No functional
change expected.
Signed-off-by: Krzysztof Kozlowski <[email protected]>
---
.../boot/dts/exynos/exynos7-espresso.dts | 6 +-
.../boot/dts/exynos/exynos7-pinctrl.dtsi | 176 +++++++++---------
2 files changed, 91 insertions(+), 91 deletions(-)
diff --git a/arch/arm64/boot/dts/exynos/exynos7-espresso.dts b/arch/arm64/boot/dts/exynos/exynos7-espresso.dts
index 125c03f351d9..2826bafade8a 100644
--- a/arch/arm64/boot/dts/exynos/exynos7-espresso.dts
+++ b/arch/arm64/boot/dts/exynos/exynos7-espresso.dts
@@ -354,7 +354,7 @@ buck10_reg: BUCK10 {
};
&pinctrl_alive {
- pmic_irq: pmic-irq {
+ pmic_irq: pmic-irq-pins {
samsung,pins = "gpa0-2";
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
@@ -393,14 +393,14 @@ &mmc_2 {
};
&pinctrl_bus1 {
- usb30_vbus_en: usb30-vbus-en {
+ usb30_vbus_en: usb30-vbus-en-pins {
samsung,pins = "gph1-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- usb3drd_boost_en: usb3drd-boost-en {
+ usb3drd_boost_en: usb3drd-boost-en-pins {
samsung,pins = "gpf4-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
diff --git a/arch/arm64/boot/dts/exynos/exynos7-pinctrl.dtsi b/arch/arm64/boot/dts/exynos/exynos7-pinctrl.dtsi
index 472dd649aa7e..be9b971f3697 100644
--- a/arch/arm64/boot/dts/exynos/exynos7-pinctrl.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynos7-pinctrl.dtsi
@@ -12,7 +12,7 @@
#include <dt-bindings/pinctrl/samsung.h>
&pinctrl_alive {
- gpa0: gpa0 {
+ gpa0: gpa0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -29,7 +29,7 @@ gpa0: gpa0 {
<GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
};
- gpa1: gpa1 {
+ gpa1: gpa1-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -46,7 +46,7 @@ gpa1: gpa1 {
<GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
};
- gpa2: gpa2 {
+ gpa2: gpa2-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -54,7 +54,7 @@ gpa2: gpa2 {
#interrupt-cells = <2>;
};
- gpa3: gpa3 {
+ gpa3: gpa3-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -64,7 +64,7 @@ gpa3: gpa3 {
};
&pinctrl_bus0 {
- gpb0: gpb0 {
+ gpb0: gpb0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -72,7 +72,7 @@ gpb0: gpb0 {
#interrupt-cells = <2>;
};
- gpc0: gpc0 {
+ gpc0: gpc0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -80,7 +80,7 @@ gpc0: gpc0 {
#interrupt-cells = <2>;
};
- gpc1: gpc1 {
+ gpc1: gpc1-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -88,7 +88,7 @@ gpc1: gpc1 {
#interrupt-cells = <2>;
};
- gpc2: gpc2 {
+ gpc2: gpc2-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -96,7 +96,7 @@ gpc2: gpc2 {
#interrupt-cells = <2>;
};
- gpc3: gpc3 {
+ gpc3: gpc3-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -104,7 +104,7 @@ gpc3: gpc3 {
#interrupt-cells = <2>;
};
- gpd0: gpd0 {
+ gpd0: gpd0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -112,7 +112,7 @@ gpd0: gpd0 {
#interrupt-cells = <2>;
};
- gpd1: gpd1 {
+ gpd1: gpd1-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -120,7 +120,7 @@ gpd1: gpd1 {
#interrupt-cells = <2>;
};
- gpd2: gpd2 {
+ gpd2: gpd2-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -128,7 +128,7 @@ gpd2: gpd2 {
#interrupt-cells = <2>;
};
- gpd4: gpd4 {
+ gpd4: gpd4-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -136,7 +136,7 @@ gpd4: gpd4 {
#interrupt-cells = <2>;
};
- gpd5: gpd5 {
+ gpd5: gpd5-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -144,7 +144,7 @@ gpd5: gpd5 {
#interrupt-cells = <2>;
};
- gpd6: gpd6 {
+ gpd6: gpd6-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -152,7 +152,7 @@ gpd6: gpd6 {
#interrupt-cells = <2>;
};
- gpd7: gpd7 {
+ gpd7: gpd7-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -160,7 +160,7 @@ gpd7: gpd7 {
#interrupt-cells = <2>;
};
- gpd8: gpd8 {
+ gpd8: gpd8-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -168,7 +168,7 @@ gpd8: gpd8 {
#interrupt-cells = <2>;
};
- gpg0: gpg0 {
+ gpg0: gpg0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -176,7 +176,7 @@ gpg0: gpg0 {
#interrupt-cells = <2>;
};
- gpg3: gpg3 {
+ gpg3: gpg3-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -184,161 +184,161 @@ gpg3: gpg3 {
#interrupt-cells = <2>;
};
- hs_i2c10_bus: hs-i2c10-bus {
+ hs_i2c10_bus: hs-i2c10-bus-pins {
samsung,pins = "gpb0-1", "gpb0-0";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- hs_i2c11_bus: hs-i2c11-bus {
+ hs_i2c11_bus: hs-i2c11-bus-pins {
samsung,pins = "gpb0-3", "gpb0-2";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- hs_i2c2_bus: hs-i2c2-bus {
+ hs_i2c2_bus: hs-i2c2-bus-pins {
samsung,pins = "gpd0-3", "gpd0-2";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- uart0_data: uart0-data {
+ uart0_data: uart0-data-pins {
samsung,pins = "gpd0-0", "gpd0-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- uart0_fctl: uart0-fctl {
+ uart0_fctl: uart0-fctl-pins {
samsung,pins = "gpd0-2", "gpd0-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- uart2_data: uart2-data {
+ uart2_data: uart2-data-pins {
samsung,pins = "gpd1-4", "gpd1-5";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- hs_i2c3_bus: hs-i2c3-bus {
+ hs_i2c3_bus: hs-i2c3-bus-pins {
samsung,pins = "gpd1-3", "gpd1-2";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- uart1_data: uart1-data {
+ uart1_data: uart1-data-pins {
samsung,pins = "gpd1-0", "gpd1-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- uart1_fctl: uart1-fctl {
+ uart1_fctl: uart1-fctl-pins {
samsung,pins = "gpd1-2", "gpd1-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- hs_i2c0_bus: hs-i2c0-bus {
+ hs_i2c0_bus: hs-i2c0-bus-pins {
samsung,pins = "gpd2-1", "gpd2-0";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- hs_i2c1_bus: hs-i2c1-bus {
+ hs_i2c1_bus: hs-i2c1-bus-pins {
samsung,pins = "gpd2-3", "gpd2-2";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- hs_i2c9_bus: hs-i2c9-bus {
+ hs_i2c9_bus: hs-i2c9-bus-pins {
samsung,pins = "gpd2-7", "gpd2-6";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- pwm0_out: pwm0-out {
+ pwm0_out: pwm0-out-pins {
samsung,pins = "gpd2-4";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- pwm1_out: pwm1-out {
+ pwm1_out: pwm1-out-pins {
samsung,pins = "gpd2-5";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- pwm2_out: pwm2-out {
+ pwm2_out: pwm2-out-pins {
samsung,pins = "gpd2-6";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- pwm3_out: pwm3-out {
+ pwm3_out: pwm3-out-pins {
samsung,pins = "gpd2-7";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- hs_i2c8_bus: hs-i2c8-bus {
+ hs_i2c8_bus: hs-i2c8-bus-pins {
samsung,pins = "gpd5-3", "gpd5-2";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- uart3_data: uart3-data {
+ uart3_data: uart3-data-pins {
samsung,pins = "gpd5-0", "gpd5-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- spi2_bus: spi2-bus {
+ spi2_bus: spi2-bus-pins {
samsung,pins = "gpd5-0", "gpd5-1", "gpd5-2", "gpd5-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- spi1_bus: spi1-bus {
+ spi1_bus: spi1-bus-pins {
samsung,pins = "gpd6-2", "gpd6-3", "gpd6-4", "gpd6-5";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- spi0_bus: spi0-bus {
+ spi0_bus: spi0-bus-pins {
samsung,pins = "gpd8-0", "gpd8-1", "gpd6-0", "gpd6-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- hs_i2c4_bus: hs-i2c4-bus {
+ hs_i2c4_bus: hs-i2c4-bus-pins {
samsung,pins = "gpg3-1", "gpg3-0";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- hs_i2c5_bus: hs-i2c5-bus {
+ hs_i2c5_bus: hs-i2c5-bus-pins {
samsung,pins = "gpg3-3", "gpg3-2";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
@@ -347,7 +347,7 @@ hs_i2c5_bus: hs-i2c5-bus {
};
&pinctrl_nfc {
- gpj0: gpj0 {
+ gpj0: gpj0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -355,7 +355,7 @@ gpj0: gpj0 {
#interrupt-cells = <2>;
};
- hs_i2c6_bus: hs-i2c6-bus {
+ hs_i2c6_bus: hs-i2c6-bus-pins {
samsung,pins = "gpj0-1", "gpj0-0";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
@@ -364,7 +364,7 @@ hs_i2c6_bus: hs-i2c6-bus {
};
&pinctrl_touch {
- gpj1: gpj1 {
+ gpj1: gpj1-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -372,7 +372,7 @@ gpj1: gpj1 {
#interrupt-cells = <2>;
};
- hs_i2c7_bus: hs-i2c7-bus {
+ hs_i2c7_bus: hs-i2c7-bus-pins {
samsung,pins = "gpj1-1", "gpj1-0";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
@@ -381,7 +381,7 @@ hs_i2c7_bus: hs-i2c7-bus {
};
&pinctrl_ff {
- gpg4: gpg4 {
+ gpg4: gpg4-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -389,7 +389,7 @@ gpg4: gpg4 {
#interrupt-cells = <2>;
};
- spi3_bus: spi3-bus {
+ spi3_bus: spi3-bus-pins {
samsung,pins = "gpg4-0", "gpg4-1", "gpg4-2", "gpg4-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
@@ -398,7 +398,7 @@ spi3_bus: spi3-bus {
};
&pinctrl_ese {
- gpv7: gpv7 {
+ gpv7: gpv7-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -406,7 +406,7 @@ gpv7: gpv7 {
#interrupt-cells = <2>;
};
- spi4_bus: spi4-bus {
+ spi4_bus: spi4-bus-pins {
samsung,pins = "gpv7-0", "gpv7-1", "gpv7-2", "gpv7-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
@@ -415,7 +415,7 @@ spi4_bus: spi4-bus {
};
&pinctrl_fsys0 {
- gpr4: gpr4 {
+ gpr4: gpr4-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -423,35 +423,35 @@ gpr4: gpr4 {
#interrupt-cells = <2>;
};
- sd2_clk: sd2-clk {
+ sd2_clk: sd2-clk-pins {
samsung,pins = "gpr4-0";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
- sd2_cmd: sd2-cmd {
+ sd2_cmd: sd2-cmd-pins {
samsung,pins = "gpr4-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
- sd2_cd: sd2-cd {
+ sd2_cd: sd2-cd-pins {
samsung,pins = "gpr4-2";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
- sd2_bus1: sd2-bus-width1 {
+ sd2_bus1: sd2-bus-width1-pins {
samsung,pins = "gpr4-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
- sd2_bus4: sd2-bus-width4 {
+ sd2_bus4: sd2-bus-width4-pins {
samsung,pins = "gpr4-4", "gpr4-5", "gpr4-6";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
@@ -460,7 +460,7 @@ sd2_bus4: sd2-bus-width4 {
};
&pinctrl_fsys1 {
- gpr0: gpr0 {
+ gpr0: gpr0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -468,7 +468,7 @@ gpr0: gpr0 {
#interrupt-cells = <2>;
};
- gpr1: gpr1 {
+ gpr1: gpr1-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -476,7 +476,7 @@ gpr1: gpr1 {
#interrupt-cells = <2>;
};
- gpr2: gpr2 {
+ gpr2: gpr2-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -484,7 +484,7 @@ gpr2: gpr2 {
#interrupt-cells = <2>;
};
- gpr3: gpr3 {
+ gpr3: gpr3-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -492,105 +492,105 @@ gpr3: gpr3 {
#interrupt-cells = <2>;
};
- sd0_clk: sd0-clk {
+ sd0_clk: sd0-clk-pins {
samsung,pins = "gpr0-0";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS7_FSYS1_PIN_DRV_LV2>;
};
- sd0_cmd: sd0-cmd {
+ sd0_cmd: sd0-cmd-pins {
samsung,pins = "gpr0-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS7_FSYS1_PIN_DRV_LV2>;
};
- sd0_ds: sd0-ds {
+ sd0_ds: sd0-ds-pins {
samsung,pins = "gpr0-2";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
samsung,pin-drv = <EXYNOS7_FSYS1_PIN_DRV_LV2>;
};
- sd0_qrdy: sd0-qrdy {
+ sd0_qrdy: sd0-qrdy-pins {
samsung,pins = "gpr0-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
samsung,pin-drv = <EXYNOS7_FSYS1_PIN_DRV_LV2>;
};
- sd0_bus1: sd0-bus-width1 {
+ sd0_bus1: sd0-bus-width1-pins {
samsung,pins = "gpr1-0";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS7_FSYS1_PIN_DRV_LV2>;
};
- sd0_bus4: sd0-bus-width4 {
+ sd0_bus4: sd0-bus-width4-pins {
samsung,pins = "gpr1-1", "gpr1-2", "gpr1-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS7_FSYS1_PIN_DRV_LV2>;
};
- sd0_bus8: sd0-bus-width8 {
+ sd0_bus8: sd0-bus-width8-pins {
samsung,pins = "gpr1-4", "gpr1-5", "gpr1-6", "gpr1-7";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS7_FSYS1_PIN_DRV_LV2>;
};
- sd1_clk: sd1-clk {
+ sd1_clk: sd1-clk-pins {
samsung,pins = "gpr2-0";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS7_FSYS1_PIN_DRV_LV3>;
};
- sd1_cmd: sd1-cmd {
+ sd1_cmd: sd1-cmd-pins {
samsung,pins = "gpr2-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS7_FSYS1_PIN_DRV_LV3>;
};
- sd1_ds: sd1-ds {
+ sd1_ds: sd1-ds-pins {
samsung,pins = "gpr2-2";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
samsung,pin-drv = <EXYNOS7_FSYS1_PIN_DRV_LV4>;
};
- sd1_qrdy: sd1-qrdy {
+ sd1_qrdy: sd1-qrdy-pins {
samsung,pins = "gpr2-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
samsung,pin-drv = <EXYNOS7_FSYS1_PIN_DRV_LV4>;
};
- sd1_int: sd1-int {
+ sd1_int: sd1-int-pins {
samsung,pins = "gpr2-4";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
samsung,pin-drv = <EXYNOS7_FSYS1_PIN_DRV_LV4>;
};
- sd1_bus1: sd1-bus-width1 {
+ sd1_bus1: sd1-bus-width1-pins {
samsung,pins = "gpr3-0";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS7_FSYS1_PIN_DRV_LV3>;
};
- sd1_bus4: sd1-bus-width4 {
+ sd1_bus4: sd1-bus-width4-pins {
samsung,pins = "gpr3-1", "gpr3-2", "gpr3-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS7_FSYS1_PIN_DRV_LV3>;
};
- sd1_bus8: sd1-bus-width8 {
+ sd1_bus8: sd1-bus-width8-pins {
samsung,pins = "gpr3-4", "gpr3-5", "gpr3-6", "gpr3-7";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
@@ -599,7 +599,7 @@ sd1_bus8: sd1-bus-width8 {
};
&pinctrl_bus1 {
- gpf0: gpf0 {
+ gpf0: gpf0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -607,7 +607,7 @@ gpf0: gpf0 {
#interrupt-cells = <2>;
};
- gpf1: gpf1 {
+ gpf1: gpf1-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -615,7 +615,7 @@ gpf1: gpf1 {
#interrupt-cells = <2>;
};
- gpf2: gpf2 {
+ gpf2: gpf2-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -623,7 +623,7 @@ gpf2: gpf2 {
#interrupt-cells = <2>;
};
- gpf3: gpf3 {
+ gpf3: gpf3-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -631,7 +631,7 @@ gpf3: gpf3 {
#interrupt-cells = <2>;
};
- gpf4: gpf4 {
+ gpf4: gpf4-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -639,7 +639,7 @@ gpf4: gpf4 {
#interrupt-cells = <2>;
};
- gpf5: gpf5 {
+ gpf5: gpf5-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -647,7 +647,7 @@ gpf5: gpf5 {
#interrupt-cells = <2>;
};
- gpg1: gpg1 {
+ gpg1: gpg1-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -655,7 +655,7 @@ gpg1: gpg1 {
#interrupt-cells = <2>;
};
- gpg2: gpg2 {
+ gpg2: gpg2-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -663,7 +663,7 @@ gpg2: gpg2 {
#interrupt-cells = <2>;
};
- gph1: gph1 {
+ gph1: gph1-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -671,7 +671,7 @@ gph1: gph1 {
#interrupt-cells = <2>;
};
- gpv6: gpv6 {
+ gpv6: gpv6-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -679,21 +679,21 @@ gpv6: gpv6 {
#interrupt-cells = <2>;
};
- spi5_bus: spi5-bus {
+ spi5_bus: spi5-bus-pins {
samsung,pins = "gpf2-0", "gpf2-1", "gpf2-2", "gpf2-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- ufs_refclk_out: ufs-refclk-out {
+ ufs_refclk_out: ufs-refclk-out-pins {
samsung,pins = "gpg2-4";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV2>;
};
- ufs_rst_n: ufs-rst-n {
+ ufs_rst_n: ufs-rst-n-pins {
samsung,pins = "gph1-5";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
--
2.32.0
Align the pin controller related nodes with dtschema. No functional
change expected.
Signed-off-by: Krzysztof Kozlowski <[email protected]>
---
.../boot/dts/exynos/exynos850-pinctrl.dtsi | 52 +++++++++----------
1 file changed, 26 insertions(+), 26 deletions(-)
diff --git a/arch/arm64/boot/dts/exynos/exynos850-pinctrl.dtsi b/arch/arm64/boot/dts/exynos/exynos850-pinctrl.dtsi
index f576b29c9b16..a71acf358d2d 100644
--- a/arch/arm64/boot/dts/exynos/exynos850-pinctrl.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynos850-pinctrl.dtsi
@@ -13,7 +13,7 @@
#include <dt-bindings/pinctrl/samsung.h>
&pinctrl_alive {
- gpa0: gpa0 {
+ gpa0: gpa0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -30,7 +30,7 @@ gpa0: gpa0 {
<GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
};
- gpa1: gpa1 {
+ gpa1: gpa1-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -47,7 +47,7 @@ gpa1: gpa1 {
<GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
};
- gpa2: gpa2 {
+ gpa2: gpa2-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -64,7 +64,7 @@ gpa2: gpa2 {
<GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
};
- gpa3: gpa3 {
+ gpa3: gpa3-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -81,7 +81,7 @@ gpa3: gpa3 {
<GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
};
- gpa4: gpa4 {
+ gpa4: gpa4-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -94,7 +94,7 @@ gpa4: gpa4 {
<GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
};
- gpq0: gpq0 {
+ gpq0: gpq0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -134,7 +134,7 @@ uart1_pins: uart1-pins {
};
&pinctrl_cmgp {
- gpm0: gpm0 {
+ gpm0: gpm0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -144,7 +144,7 @@ gpm0: gpm0 {
interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
};
- gpm1: gpm1 {
+ gpm1: gpm1-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -154,7 +154,7 @@ gpm1: gpm1 {
interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
};
- gpm2: gpm2 {
+ gpm2: gpm2-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -164,7 +164,7 @@ gpm2: gpm2 {
interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
};
- gpm3: gpm3 {
+ gpm3: gpm3-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -174,7 +174,7 @@ gpm3: gpm3 {
interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
};
- gpm4: gpm4 {
+ gpm4: gpm4-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -184,7 +184,7 @@ gpm4: gpm4 {
interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
};
- gpm5: gpm5 {
+ gpm5: gpm5-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -256,7 +256,7 @@ spi2_pins: spi2-pins {
};
&pinctrl_aud {
- gpb0: gpb0 {
+ gpb0: gpb0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -264,7 +264,7 @@ gpb0: gpb0 {
#interrupt-cells = <2>;
};
- gpb1: gpb1 {
+ gpb1: gpb1-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -322,7 +322,7 @@ aud_fm_idle_pins: aud-fm-idle-pins {
};
&pinctrl_hsi {
- gpf2: gpf2 {
+ gpf2: gpf2-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -367,7 +367,7 @@ sd2_pdn_pins: sd2-pdn-pins {
};
&pinctrl_core {
- gpf0: gpf0 {
+ gpf0: gpf0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -375,7 +375,7 @@ gpf0: gpf0 {
#interrupt-cells = <2>;
};
- gpf1: gpf1 {
+ gpf1: gpf1-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -434,7 +434,7 @@ sd0_bus8_pins: sd0-bus8-pins {
};
&pinctrl_peri {
- gpc0: gpc0 {
+ gpc0: gpc0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -442,7 +442,7 @@ gpc0: gpc0 {
#interrupt-cells = <2>;
};
- gpc1: gpc1 {
+ gpc1: gpc1-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -450,7 +450,7 @@ gpc1: gpc1 {
#interrupt-cells = <2>;
};
- gpg0: gpg0 {
+ gpg0: gpg0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -458,7 +458,7 @@ gpg0: gpg0 {
#interrupt-cells = <2>;
};
- gpg1: gpg1 {
+ gpg1: gpg1-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -466,7 +466,7 @@ gpg1: gpg1 {
#interrupt-cells = <2>;
};
- gpg2: gpg2 {
+ gpg2: gpg2-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -474,7 +474,7 @@ gpg2: gpg2 {
#interrupt-cells = <2>;
};
- gpg3: gpg3 {
+ gpg3: gpg3-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -482,14 +482,14 @@ gpg3: gpg3 {
#interrupt-cells = <2>;
};
- gpp0: gpp0 {
+ gpp0: gpp0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
- gpp1: gpp1 {
+ gpp1: gpp1-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -497,7 +497,7 @@ gpp1: gpp1 {
#interrupt-cells = <2>;
};
- gpp2: gpp2 {
+ gpp2: gpp2-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
--
2.32.0
Align the pin controller related nodes with dtschema. No functional
change expected.
Signed-off-by: Krzysztof Kozlowski <[email protected]>
---
arch/arm/boot/dts/s3c2416-pinctrl.dtsi | 60 +++++++++++++-------------
1 file changed, 30 insertions(+), 30 deletions(-)
diff --git a/arch/arm/boot/dts/s3c2416-pinctrl.dtsi b/arch/arm/boot/dts/s3c2416-pinctrl.dtsi
index 92439ee5d7de..20a7d72827c2 100644
--- a/arch/arm/boot/dts/s3c2416-pinctrl.dtsi
+++ b/arch/arm/boot/dts/s3c2416-pinctrl.dtsi
@@ -12,66 +12,66 @@ &pinctrl_0 {
* Pin banks
*/
- gpa: gpa {
+ gpa: gpa-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
};
- gpb: gpb {
+ gpb: gpb-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
};
- gpc: gpc {
+ gpc: gpc-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
};
- gpd: gpd {
+ gpd: gpd-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
};
- gpe: gpe {
+ gpe: gpe-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
};
- gpf: gpf {
+ gpf: gpf-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
- gpg: gpg {
+ gpg: gpg-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
- gph: gph {
+ gph: gph-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
};
- gpj: gpj {
+ gpj: gpj-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
};
- gpk: gpk {
+ gpk: gpk-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
};
- gpl: gpl {
+ gpl: gpl-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
};
- gpm: gpm {
+ gpm: gpm-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
};
@@ -80,92 +80,92 @@ gpm: gpm {
* Pin groups
*/
- uart0_data: uart0-data {
+ uart0_data: uart0-data-pins {
samsung,pins = "gph-0", "gph-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
};
- uart0_fctl: uart0-fctl {
+ uart0_fctl: uart0-fctl-pins {
samsung,pins = "gph-8", "gph-9";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
};
- uart1_data: uart1-data {
+ uart1_data: uart1-data-pins {
samsung,pins = "gph-2", "gph-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
};
- uart1_fctl: uart1-fctl {
+ uart1_fctl: uart1-fctl-pins {
samsung,pins = "gph-10", "gph-11";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
};
- uart2_data: uart2-data {
+ uart2_data: uart2-data-pins {
samsung,pins = "gph-4", "gph-5";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
};
- uart2_fctl: uart2-fctl {
+ uart2_fctl: uart2-fctl-pins {
samsung,pins = "gph-6", "gph-7";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
};
- uart3_data: uart3-data {
+ uart3_data: uart3-data-pins {
samsung,pins = "gph-6", "gph-7";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
};
- extuart_clk: extuart-clk {
+ extuart_clk: extuart-clk-pins {
samsung,pins = "gph-12";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
};
- i2c0_bus: i2c0-bus {
+ i2c0_bus: i2c0-bus-pins {
samsung,pins = "gpe-14", "gpe-15";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
};
- spi0_bus: spi0-bus {
+ spi0_bus: spi0-bus-pins {
samsung,pins = "gpe-11", "gpe-12", "gpe-13";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
};
- sd0_clk: sd0-clk {
+ sd0_clk: sd0-clk-pins {
samsung,pins = "gpe-5";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
};
- sd0_cmd: sd0-cmd {
+ sd0_cmd: sd0-cmd-pins {
samsung,pins = "gpe-6";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
};
- sd0_bus1: sd0-bus1 {
+ sd0_bus1: sd0-bus1-pins {
samsung,pins = "gpe-7";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
};
- sd0_bus4: sd0-bus4 {
+ sd0_bus4: sd0-bus4-pins {
samsung,pins = "gpe-8", "gpe-9", "gpe-10";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
};
- sd1_cmd: sd1-cmd {
+ sd1_cmd: sd1-cmd-pins {
samsung,pins = "gpl-8";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
};
- sd1_clk: sd1-clk {
+ sd1_clk: sd1-clk-pins {
samsung,pins = "gpl-9";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
};
- sd1_bus1: sd1-bus1 {
+ sd1_bus1: sd1-bus1-pins {
samsung,pins = "gpl-0";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
};
- sd1_bus4: sd1-bus4 {
+ sd1_bus4: sd1-bus4-pins {
samsung,pins = "gpl-1", "gpl-2", "gpl-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
};
--
2.32.0
Align the pin controller related nodes with dtschema. No functional
change expected.
Signed-off-by: Krzysztof Kozlowski <[email protected]>
---
.../boot/dts/exynos/exynosautov9-pinctrl.dtsi | 50 +++++++++----------
1 file changed, 25 insertions(+), 25 deletions(-)
diff --git a/arch/arm64/boot/dts/exynos/exynosautov9-pinctrl.dtsi b/arch/arm64/boot/dts/exynos/exynosautov9-pinctrl.dtsi
index 2407b03b5404..ef0349d1c3d0 100644
--- a/arch/arm64/boot/dts/exynos/exynosautov9-pinctrl.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynosautov9-pinctrl.dtsi
@@ -11,7 +11,7 @@
#include <dt-bindings/pinctrl/samsung.h>
&pinctrl_alive {
- gpa0: gpa0 {
+ gpa0: gpa0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
@@ -27,7 +27,7 @@ gpa0: gpa0 {
<GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
};
- gpa1: gpa1 {
+ gpa1: gpa1-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
@@ -47,7 +47,7 @@ dp1_hpd: dp1-hpd-pins {
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
};
- gpq0: gpq0 {
+ gpq0: gpq0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -69,7 +69,7 @@ speedy1_bus: speedy1-bus-pins {
};
&pinctrl_aud {
- gpb0: gpb0 {
+ gpb0: gpb0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -77,7 +77,7 @@ gpb0: gpb0 {
#interrupt-cells = <2>;
};
- gpb1: gpb1 {
+ gpb1: gpb1-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -85,7 +85,7 @@ gpb1: gpb1 {
#interrupt-cells = <2>;
};
- gpb2: gpb2 {
+ gpb2: gpb2-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -93,7 +93,7 @@ gpb2: gpb2 {
#interrupt-cells = <2>;
};
- gpb3: gpb3 {
+ gpb3: gpb3-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -199,7 +199,7 @@ aud_i2s6_idle: aaud-i2s6-idle-pins {
};
&pinctrl_fsys0 {
- gpf0: gpf0 {
+ gpf0: gpf0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -207,7 +207,7 @@ gpf0: gpf0 {
#interrupt-cells = <2>;
};
- gpf1: gpf1 {
+ gpf1: gpf1-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -355,7 +355,7 @@ pcie_perst5_in: pcie-perst5-in-pins {
};
&pinctrl_fsys1 {
- gpf8: gpf8 {
+ gpf8: gpf8-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -393,7 +393,7 @@ sd2_bus4: sd2-bus-width4-pins {
};
&pinctrl_fsys2 {
- gpf2: gpf2 {
+ gpf2: gpf2-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -401,7 +401,7 @@ gpf2: gpf2 {
#interrupt-cells = <2>;
};
- gpf3: gpf3 {
+ gpf3: gpf3-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -409,7 +409,7 @@ gpf3: gpf3 {
#interrupt-cells = <2>;
};
- gpf4: gpf4 {
+ gpf4: gpf4-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -417,7 +417,7 @@ gpf4: gpf4 {
#interrupt-cells = <2>;
};
- gpf5: gpf5 {
+ gpf5: gpf5-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -425,7 +425,7 @@ gpf5: gpf5 {
#interrupt-cells = <2>;
};
- gpf6: gpf6 {
+ gpf6: gpf6-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -499,7 +499,7 @@ eth1_pps_out: eth1-pps-out-pins {
};
&pinctrl_peric0 {
- gpp0: gpp0 {
+ gpp0: gpp0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -507,7 +507,7 @@ gpp0: gpp0 {
#interrupt-cells = <2>;
};
- gpp1: gpp1 {
+ gpp1: gpp1-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -515,7 +515,7 @@ gpp1: gpp1 {
#interrupt-cells = <2>;
};
- gpp2: gpp2 {
+ gpp2: gpp2-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -523,7 +523,7 @@ gpp2: gpp2 {
#interrupt-cells = <2>;
};
- gpg0: gpg0 {
+ gpg0: gpg0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -833,7 +833,7 @@ uart5_bus_dual: uart5-bus-dual-pins {
};
&pinctrl_peric1 {
- gpp3: gpp3 {
+ gpp3: gpp3-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -841,7 +841,7 @@ gpp3: gpp3 {
#interrupt-cells = <2>;
};
- gpp4: gpp4 {
+ gpp4: gpp4-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -849,7 +849,7 @@ gpp4: gpp4 {
#interrupt-cells = <2>;
};
- gpp5: gpp5 {
+ gpp5: gpp5-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -857,7 +857,7 @@ gpp5: gpp5 {
#interrupt-cells = <2>;
};
- gpg1: gpg1 {
+ gpg1: gpg1-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -865,7 +865,7 @@ gpg1: gpg1 {
#interrupt-cells = <2>;
};
- gpg2: gpg2 {
+ gpg2: gpg2-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -873,7 +873,7 @@ gpg2: gpg2 {
#interrupt-cells = <2>;
};
- gpg3: gpg3 {
+ gpg3: gpg3-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
--
2.32.0
Align the pin controller related nodes with dtschema. No functional
change expected.
Signed-off-by: Krzysztof Kozlowski <[email protected]>
---
arch/arm/boot/dts/s5pv210-aquila.dts | 2 +-
arch/arm/boot/dts/s5pv210-aries.dtsi | 40 ++--
arch/arm/boot/dts/s5pv210-fascinate4g.dts | 12 +-
arch/arm/boot/dts/s5pv210-galaxys.dts | 16 +-
arch/arm/boot/dts/s5pv210-pinctrl.dtsi | 226 +++++++++++-----------
5 files changed, 148 insertions(+), 148 deletions(-)
diff --git a/arch/arm/boot/dts/s5pv210-aquila.dts b/arch/arm/boot/dts/s5pv210-aquila.dts
index 6423348034b6..54de3bc77c30 100644
--- a/arch/arm/boot/dts/s5pv210-aquila.dts
+++ b/arch/arm/boot/dts/s5pv210-aquila.dts
@@ -391,7 +391,7 @@ timing0: timing {
};
&pinctrl0 {
- t_flash_detect: t-flash-detect {
+ t_flash_detect: t-flash-detect-pins {
samsung,pins = "gph3-4";
samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
diff --git a/arch/arm/boot/dts/s5pv210-aries.dtsi b/arch/arm/boot/dts/s5pv210-aries.dtsi
index 160f8cd9a68d..c8f1c324a6c2 100644
--- a/arch/arm/boot/dts/s5pv210-aries.dtsi
+++ b/arch/arm/boot/dts/s5pv210-aries.dtsi
@@ -645,21 +645,21 @@ &mfc {
};
&pinctrl0 {
- bt_reset: bt-reset {
+ bt_reset: bt-reset-pins {
samsung,pins = "gpb-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- wlan_bt_en: wlan-bt-en {
+ wlan_bt_en: wlan-bt-en-pins {
samsung,pins = "gpb-5";
samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
samsung,pin-val = <1>;
};
- codec_ldo: codec-ldo {
+ codec_ldo: codec-ldo-pins {
samsung,pins = "gpf3-4";
samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
@@ -671,19 +671,19 @@ prox_i2c_pins: gp2a-i2c-pins {
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- wlan_gpio_rst: wlan-gpio-rst {
+ wlan_gpio_rst: wlan-gpio-rst-pins {
samsung,pins = "gpg1-2";
samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
- bt_wake: bt-wake {
+ bt_wake: bt-wake-pins {
samsung,pins = "gpg3-4";
samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
- gp2a_irq: gp2a-irq {
+ gp2a_irq: gp2a-irq-pins {
samsung,pins = "gph0-2";
samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
samsung,pin-pud = <S3C64XX_PIN_PULL_DOWN>;
@@ -698,67 +698,67 @@ pmic_dvs_pins: pmic-dvs-pins {
samsung,pin-val = <0>;
};
- pmic_irq: pmic-irq {
+ pmic_irq: pmic-irq-pins {
samsung,pins = "gph0-7";
samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- wifi_host_wake: wifi-host-wake {
+ wifi_host_wake: wifi-host-wake-pins {
samsung,pins = "gph2-4";
samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
samsung,pin-pud = <S3C64XX_PIN_PULL_DOWN>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- bt_host_wake: bt-host-wake {
+ bt_host_wake: bt-host-wake-pins {
samsung,pins = "gph2-5";
samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
samsung,pin-pud = <S3C64XX_PIN_PULL_DOWN>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- musb_irq: musq-irq {
+ musb_irq: musq-irq-pins {
samsung,pins = "gph2-7";
samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- tf_detect: tf-detect {
+ tf_detect: tf-detect-pins {
samsung,pins = "gph3-4";
samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
samsung,pin-pud = <S3C64XX_PIN_PULL_DOWN>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- wifi_wake: wifi-wake {
+ wifi_wake: wifi-wake-pins {
samsung,pins = "gph3-5";
samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
- magnetometer_i2c_pins: yas529-i2c-pins {
+ magnetometer_i2c_pins: yas529-i2c-pins-pins {
samsung,pins = "gpj0-0", "gpj0-1";
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- ts_irq: ts-irq {
+ ts_irq: ts-irq-pins {
samsung,pins = "gpj0-5";
samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- vibrator_ena: vibrator-ena {
+ vibrator_ena: vibrator-ena-pins {
samsung,pins = "gpj1-1";
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- gp2a_power: gp2a-power {
+ gp2a_power: gp2a-power-pins {
samsung,pins = "gpj1-4";
samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
@@ -771,7 +771,7 @@ touchkey_i2c_pins: touchkey-i2c-pins {
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- touchkey_vdd_ena: touchkey-vdd-ena {
+ touchkey_vdd_ena: touchkey-vdd-ena-pins {
samsung,pins = "gpj3-2";
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
@@ -789,13 +789,13 @@ accel_i2c_pins: accel-i2c-pins {
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- pmic_i2c_pins: pmic-i2c-pins {
+ pmic_i2c_pins: pmic-i2c-pins-pins {
samsung,pins = "gpj4-0", "gpj4-3";
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- touchkey_irq: touchkey-irq {
+ touchkey_irq: touchkey-irq-pins {
samsung,pins = "gpj4-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
@@ -820,7 +820,7 @@ sound_i2c_pins: sound-i2c-pins {
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- panel_rst: panel-rst {
+ panel_rst: panel-rst-pins {
samsung,pins = "mp05-5";
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
diff --git a/arch/arm/boot/dts/s5pv210-fascinate4g.dts b/arch/arm/boot/dts/s5pv210-fascinate4g.dts
index 7427c84f1126..dfb2ee65e4a8 100644
--- a/arch/arm/boot/dts/s5pv210-fascinate4g.dts
+++ b/arch/arm/boot/dts/s5pv210-fascinate4g.dts
@@ -126,39 +126,39 @@ &pinctrl0 {
pinctrl-names = "default";
pinctrl-0 = <&sleep_cfg>;
- headset_det: headset-det {
+ headset_det: headset-det-pins {
samsung,pins = "gph0-6", "gph3-6";
samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
- fg_irq: fg-irq {
+ fg_irq: fg-irq-pins {
samsung,pins = "gph3-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- headset_micbias_ena: headset-micbias-ena {
+ headset_micbias_ena: headset-micbias-ena-pins {
samsung,pins = "gpj2-5";
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- earpath_sel: earpath-sel {
+ earpath_sel: earpath-sel-pins {
samsung,pins = "gpj2-6";
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- main_micbias_ena: main-micbias-ena {
+ main_micbias_ena: main-micbias-ena-pins {
samsung,pins = "gpj4-2";
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
/* Based on vendor kernel v2.6.35.7 */
- sleep_cfg: sleep-cfg {
+ sleep_cfg: sleep-state {
PIN_SLP(gpa0-0, PREV, NONE);
PIN_SLP(gpa0-1, PREV, NONE);
PIN_SLP(gpa0-2, PREV, NONE);
diff --git a/arch/arm/boot/dts/s5pv210-galaxys.dts b/arch/arm/boot/dts/s5pv210-galaxys.dts
index eeec2bdece11..a78caaa1f3c5 100644
--- a/arch/arm/boot/dts/s5pv210-galaxys.dts
+++ b/arch/arm/boot/dts/s5pv210-galaxys.dts
@@ -150,53 +150,53 @@ &pinctrl0 {
pinctrl-names = "default";
pinctrl-0 = <&sleep_cfg>;
- fm_i2c_pins: fm-i2c-pins {
+ fm_i2c_pins: fm-i2c-pins-pins {
samsung,pins = "gpd1-2", "gpd1-3";
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- headset_det: headset-det {
+ headset_det: headset-det-pins {
samsung,pins = "gph0-6", "gph3-6";
samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
- fm_irq: fm-irq {
+ fm_irq: fm-irq-pins {
samsung,pins = "gpj2-4";
samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- fm_rst: fm-rst {
+ fm_rst: fm-rst-pins {
samsung,pins = "gpj2-5";
samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- earpath_sel: earpath-sel {
+ earpath_sel: earpath-sel-pins {
samsung,pins = "gpj2-6";
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- massmemory_en: massmemory-en {
+ massmemory_en: massmemory-en-pins {
samsung,pins = "gpj2-7";
samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- micbias_reg_ena: micbias-reg-ena {
+ micbias_reg_ena: micbias-reg-ena-pins {
samsung,pins = "gpj4-2";
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
/* Based on CyanogenMod 3.0.101 kernel */
- sleep_cfg: sleep-cfg {
+ sleep_cfg: sleep-state {
PIN_SLP(gpa0-0, PREV, NONE);
PIN_SLP(gpa0-1, PREV, NONE);
PIN_SLP(gpa0-2, PREV, NONE);
diff --git a/arch/arm/boot/dts/s5pv210-pinctrl.dtsi b/arch/arm/boot/dts/s5pv210-pinctrl.dtsi
index b8c5172c31dd..ae34e7e57892 100644
--- a/arch/arm/boot/dts/s5pv210-pinctrl.dtsi
+++ b/arch/arm/boot/dts/s5pv210-pinctrl.dtsi
@@ -26,7 +26,7 @@ _pin { \
}
&pinctrl0 {
- gpa0: gpa0 {
+ gpa0: gpa0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -34,7 +34,7 @@ gpa0: gpa0 {
#interrupt-cells = <2>;
};
- gpa1: gpa1 {
+ gpa1: gpa1-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -42,7 +42,7 @@ gpa1: gpa1 {
#interrupt-cells = <2>;
};
- gpb: gpb {
+ gpb: gpb-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -50,7 +50,7 @@ gpb: gpb {
#interrupt-cells = <2>;
};
- gpc0: gpc0 {
+ gpc0: gpc0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -58,7 +58,7 @@ gpc0: gpc0 {
#interrupt-cells = <2>;
};
- gpc1: gpc1 {
+ gpc1: gpc1-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -66,7 +66,7 @@ gpc1: gpc1 {
#interrupt-cells = <2>;
};
- gpd0: gpd0 {
+ gpd0: gpd0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -74,7 +74,7 @@ gpd0: gpd0 {
#interrupt-cells = <2>;
};
- gpd1: gpd1 {
+ gpd1: gpd1-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -82,7 +82,7 @@ gpd1: gpd1 {
#interrupt-cells = <2>;
};
- gpe0: gpe0 {
+ gpe0: gpe0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -90,7 +90,7 @@ gpe0: gpe0 {
#interrupt-cells = <2>;
};
- gpe1: gpe1 {
+ gpe1: gpe1-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -98,7 +98,7 @@ gpe1: gpe1 {
#interrupt-cells = <2>;
};
- gpf0: gpf0 {
+ gpf0: gpf0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -106,7 +106,7 @@ gpf0: gpf0 {
#interrupt-cells = <2>;
};
- gpf1: gpf1 {
+ gpf1: gpf1-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -114,7 +114,7 @@ gpf1: gpf1 {
#interrupt-cells = <2>;
};
- gpf2: gpf2 {
+ gpf2: gpf2-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -122,7 +122,7 @@ gpf2: gpf2 {
#interrupt-cells = <2>;
};
- gpf3: gpf3 {
+ gpf3: gpf3-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -130,7 +130,7 @@ gpf3: gpf3 {
#interrupt-cells = <2>;
};
- gpg0: gpg0 {
+ gpg0: gpg0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -138,7 +138,7 @@ gpg0: gpg0 {
#interrupt-cells = <2>;
};
- gpg1: gpg1 {
+ gpg1: gpg1-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -146,7 +146,7 @@ gpg1: gpg1 {
#interrupt-cells = <2>;
};
- gpg2: gpg2 {
+ gpg2: gpg2-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -154,7 +154,7 @@ gpg2: gpg2 {
#interrupt-cells = <2>;
};
- gpg3: gpg3 {
+ gpg3: gpg3-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -162,7 +162,7 @@ gpg3: gpg3 {
#interrupt-cells = <2>;
};
- gpj0: gpj0 {
+ gpj0: gpj0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -170,7 +170,7 @@ gpj0: gpj0 {
#interrupt-cells = <2>;
};
- gpj1: gpj1 {
+ gpj1: gpj1-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -178,7 +178,7 @@ gpj1: gpj1 {
#interrupt-cells = <2>;
};
- gpj2: gpj2 {
+ gpj2: gpj2-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -186,7 +186,7 @@ gpj2: gpj2 {
#interrupt-cells = <2>;
};
- gpj3: gpj3 {
+ gpj3: gpj3-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -194,7 +194,7 @@ gpj3: gpj3 {
#interrupt-cells = <2>;
};
- gpj4: gpj4 {
+ gpj4: gpj4-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -202,47 +202,47 @@ gpj4: gpj4 {
#interrupt-cells = <2>;
};
- gpi: gpi {
+ gpi: gpi-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
};
- mp01: mp01 {
+ mp01: mp01-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
};
- mp02: mp02 {
+ mp02: mp02-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
};
- mp03: mp03 {
+ mp03: mp03-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
};
- mp04: mp04 {
+ mp04: mp04-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
};
- mp05: mp05 {
+ mp05: mp05-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
};
- mp06: mp06 {
+ mp06: mp06-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
};
- mp07: mp07 {
+ mp07: mp07-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
};
- gph0: gph0 {
+ gph0: gph0-gpio-bank {
gpio-controller;
interrupt-controller;
interrupt-parent = <&vic0>;
@@ -252,7 +252,7 @@ gph0: gph0 {
#interrupt-cells = <2>;
};
- gph1: gph1 {
+ gph1: gph1-gpio-bank {
gpio-controller;
interrupt-controller;
interrupt-parent = <&vic0>;
@@ -262,7 +262,7 @@ gph1: gph1 {
#interrupt-cells = <2>;
};
- gph2: gph2 {
+ gph2: gph2-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -270,7 +270,7 @@ gph2: gph2 {
#interrupt-cells = <2>;
};
- gph3: gph3 {
+ gph3: gph3-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@@ -278,77 +278,77 @@ gph3: gph3 {
#interrupt-cells = <2>;
};
- uart0_data: uart0-data {
+ uart0_data: uart0-data-pins {
samsung,pins = "gpa0-0", "gpa0-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- uart0_fctl: uart0-fctl {
+ uart0_fctl: uart0-fctl-pins {
samsung,pins = "gpa0-2", "gpa0-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- uart1_data: uart1-data {
+ uart1_data: uart1-data-pins {
samsung,pins = "gpa0-4", "gpa0-5";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- uart1_fctl: uart1-fctl {
+ uart1_fctl: uart1-fctl-pins {
samsung,pins = "gpa0-6", "gpa0-7";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- uart2_data: uart2-data {
+ uart2_data: uart2-data-pins {
samsung,pins = "gpa1-0", "gpa1-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- uart2_fctl: uart2-fctl {
+ uart2_fctl: uart2-fctl-pins {
samsung,pins = "gpa1-2", "gpa1-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- uart3_data: uart3-data {
+ uart3_data: uart3-data-pins {
samsung,pins = "gpa1-2", "gpa1-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- uart_audio: uart-audio {
+ uart_audio: uart-audio-pins {
samsung,pins = "gpa1-2", "gpa1-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- spi0_bus: spi0-bus {
+ spi0_bus: spi0-bus-pins {
samsung,pins = "gpb-0", "gpb-2", "gpb-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- spi1_bus: spi1-bus {
+ spi1_bus: spi1-bus-pins {
samsung,pins = "gpb-4", "gpb-6", "gpb-7";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- i2s0_bus: i2s0-bus {
+ i2s0_bus: i2s0-bus-pins {
samsung,pins = "gpi-0", "gpi-1", "gpi-2", "gpi-3",
"gpi-4", "gpi-5", "gpi-6";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
@@ -356,7 +356,7 @@ i2s0_bus: i2s0-bus {
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- i2s1_bus: i2s1-bus {
+ i2s1_bus: i2s1-bus-pins {
samsung,pins = "gpc0-0", "gpc0-1", "gpc0-2", "gpc0-3",
"gpc0-4";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
@@ -364,7 +364,7 @@ i2s1_bus: i2s1-bus {
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- i2s2_bus: i2s2-bus {
+ i2s2_bus: i2s2-bus-pins {
samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3",
"gpc1-4";
samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
@@ -372,7 +372,7 @@ i2s2_bus: i2s2-bus {
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- pcm1_bus: pcm1-bus {
+ pcm1_bus: pcm1-bus-pins {
samsung,pins = "gpc0-0", "gpc0-1", "gpc0-2", "gpc0-3",
"gpc0-4";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
@@ -380,7 +380,7 @@ pcm1_bus: pcm1-bus {
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- ac97_bus: ac97-bus {
+ ac97_bus: ac97-bus-pins {
samsung,pins = "gpc0-0", "gpc0-1", "gpc0-2", "gpc0-3",
"gpc0-4";
samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
@@ -388,7 +388,7 @@ ac97_bus: ac97-bus {
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- i2s2_bus: i2s2-bus {
+ i2s2_bus: i2s2-bus-pins {
samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3",
"gpc1-4";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
@@ -396,7 +396,7 @@ i2s2_bus: i2s2-bus {
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- pcm2_bus: pcm2-bus {
+ pcm2_bus: pcm2-bus-pins {
samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3",
"gpc1-4";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
@@ -404,371 +404,371 @@ pcm2_bus: pcm2-bus {
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- spdif_bus: spdif-bus {
+ spdif_bus: spdif-bus-pins {
samsung,pins = "gpc1-0", "gpc1-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- spi2_bus: spi2-bus {
+ spi2_bus: spi2-bus-pins {
samsung,pins = "gpc1-1", "gpc1-2", "gpc1-3", "gpc1-4";
samsung,pin-function = <EXYNOS_PIN_FUNC_5>;
samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- i2c0_bus: i2c0-bus {
+ i2c0_bus: i2c0-bus-pins {
samsung,pins = "gpd1-0", "gpd1-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- i2c1_bus: i2c1-bus {
+ i2c1_bus: i2c1-bus-pins {
samsung,pins = "gpd1-2", "gpd1-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- i2c2_bus: i2c2-bus {
+ i2c2_bus: i2c2-bus-pins {
samsung,pins = "gpd1-4", "gpd1-5";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- pwm0_out: pwm0-out {
+ pwm0_out: pwm0-out-pins {
samsung,pins = "gpd0-0";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- pwm1_out: pwm1-out {
+ pwm1_out: pwm1-out-pins {
samsung,pins = "gpd0-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- pwm2_out: pwm2-out {
+ pwm2_out: pwm2-out-pins {
samsung,pins = "gpd0-2";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- pwm3_out: pwm3-out {
+ pwm3_out: pwm3-out-pins {
samsung,pins = "gpd0-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- keypad_row0: keypad-row-0 {
+ keypad_row0: keypad-row-0-pins {
samsung,pins = "gph3-0";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- keypad_row1: keypad-row-1 {
+ keypad_row1: keypad-row-1-pins {
samsung,pins = "gph3-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- keypad_row2: keypad-row-2 {
+ keypad_row2: keypad-row-2-pins {
samsung,pins = "gph3-2";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- keypad_row3: keypad-row-3 {
+ keypad_row3: keypad-row-3-pins {
samsung,pins = "gph3-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- keypad_row4: keypad-row-4 {
+ keypad_row4: keypad-row-4-pins {
samsung,pins = "gph3-4";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- keypad_row5: keypad-row-5 {
+ keypad_row5: keypad-row-5-pins {
samsung,pins = "gph3-5";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- keypad_row6: keypad-row-6 {
+ keypad_row6: keypad-row-6-pins {
samsung,pins = "gph3-6";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- keypad_row7: keypad-row-7 {
+ keypad_row7: keypad-row-7-pins {
samsung,pins = "gph3-7";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- keypad_col0: keypad-col-0 {
+ keypad_col0: keypad-col-0-pins {
samsung,pins = "gph2-0";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- keypad_col1: keypad-col-1 {
+ keypad_col1: keypad-col-1-pins {
samsung,pins = "gph2-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- keypad_col2: keypad-col-2 {
+ keypad_col2: keypad-col-2-pins {
samsung,pins = "gph2-2";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- keypad_col3: keypad-col-3 {
+ keypad_col3: keypad-col-3-pins {
samsung,pins = "gph2-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- keypad_col4: keypad-col-4 {
+ keypad_col4: keypad-col-4-pins {
samsung,pins = "gph2-4";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- keypad_col5: keypad-col-5 {
+ keypad_col5: keypad-col-5-pins {
samsung,pins = "gph2-5";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- keypad_col6: keypad-col-6 {
+ keypad_col6: keypad-col-6-pins {
samsung,pins = "gph2-6";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- keypad_col7: keypad-col-7 {
+ keypad_col7: keypad-col-7-pins {
samsung,pins = "gph2-7";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- sd0_clk: sd0-clk {
+ sd0_clk: sd0-clk-pins {
samsung,pins = "gpg0-0";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
- sd0_cmd: sd0-cmd {
+ sd0_cmd: sd0-cmd-pins {
samsung,pins = "gpg0-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
- sd0_cd: sd0-cd {
+ sd0_cd: sd0-cd-pins {
samsung,pins = "gpg0-2";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
- sd0_bus1: sd0-bus-width1 {
+ sd0_bus1: sd0-bus-width1-pins {
samsung,pins = "gpg0-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
- sd0_bus4: sd0-bus-width4 {
+ sd0_bus4: sd0-bus-width4-pins {
samsung,pins = "gpg0-3", "gpg0-4", "gpg0-5", "gpg0-6";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
- sd0_bus8: sd0-bus-width8 {
+ sd0_bus8: sd0-bus-width8-pins {
samsung,pins = "gpg1-3", "gpg1-4", "gpg1-5", "gpg1-6";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
- sd1_clk: sd1-clk {
+ sd1_clk: sd1-clk-pins {
samsung,pins = "gpg1-0";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
- sd1_cmd: sd1-cmd {
+ sd1_cmd: sd1-cmd-pins {
samsung,pins = "gpg1-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
- sd1_cd: sd1-cd {
+ sd1_cd: sd1-cd-pins {
samsung,pins = "gpg1-2";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
- sd1_bus1: sd1-bus-width1 {
+ sd1_bus1: sd1-bus-width1-pins {
samsung,pins = "gpg1-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
- sd1_bus4: sd1-bus-width4 {
+ sd1_bus4: sd1-bus-width4-pins {
samsung,pins = "gpg1-3", "gpg1-4", "gpg1-5", "gpg1-6";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
- sd2_clk: sd2-clk {
+ sd2_clk: sd2-clk-pins {
samsung,pins = "gpg2-0";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
- sd2_cmd: sd2-cmd {
+ sd2_cmd: sd2-cmd-pins {
samsung,pins = "gpg2-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
- sd2_cd: sd2-cd {
+ sd2_cd: sd2-cd-pins {
samsung,pins = "gpg2-2";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
- sd2_bus1: sd2-bus-width1 {
+ sd2_bus1: sd2-bus-width1-pins {
samsung,pins = "gpg2-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
- sd2_bus4: sd2-bus-width4 {
+ sd2_bus4: sd2-bus-width4-pins {
samsung,pins = "gpg2-3", "gpg2-4", "gpg2-5", "gpg2-6";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
- sd2_bus8: sd2-bus-width8 {
+ sd2_bus8: sd2-bus-width8-pins {
samsung,pins = "gpg3-3", "gpg3-4", "gpg3-5", "gpg3-6";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
- sd3_clk: sd3-clk {
+ sd3_clk: sd3-clk-pins {
samsung,pins = "gpg3-0";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
- sd3_cmd: sd3-cmd {
+ sd3_cmd: sd3-cmd-pins {
samsung,pins = "gpg3-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
- sd3_cd: sd3-cd {
+ sd3_cd: sd3-cd-pins {
samsung,pins = "gpg3-2";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
- sd3_bus1: sd3-bus-width1 {
+ sd3_bus1: sd3-bus-width1-pins {
samsung,pins = "gpg3-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
- sd3_bus4: sd3-bus-width4 {
+ sd3_bus4: sd3-bus-width4-pins {
samsung,pins = "gpg3-3", "gpg3-4", "gpg3-5", "gpg3-6";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
- eint0: ext-int0 {
+ eint0: ext-int0-pins {
samsung,pins = "gph0-0";
samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- eint8: ext-int8 {
+ eint8: ext-int8-pins {
samsung,pins = "gph1-0";
samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- eint15: ext-int15 {
+ eint15: ext-int15-pins {
samsung,pins = "gph1-7";
samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- eint16: ext-int16 {
+ eint16: ext-int16-pins {
samsung,pins = "gph2-0";
samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- eint31: ext-int31 {
+ eint31: ext-int31-pins {
samsung,pins = "gph3-7";
samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- cam_port_a_io: cam-port-a-io {
+ cam_port_a_io: cam-port-a-io-pins {
samsung,pins = "gpe0-0", "gpe0-1", "gpe0-2", "gpe0-3",
"gpe0-4", "gpe0-5", "gpe0-6", "gpe0-7",
"gpe1-0", "gpe1-1", "gpe1-2", "gpe1-4";
@@ -777,21 +777,21 @@ cam_port_a_io: cam-port-a-io {
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- cam_port_a_clk_active: cam-port-a-clk-active {
+ cam_port_a_clk_active: cam-port-a-clk-active-pins {
samsung,pins = "gpe1-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
- cam_port_a_clk_idle: cam-port-a-clk-idle {
+ cam_port_a_clk_idle: cam-port-a-clk-idle-pins {
samsung,pins = "gpe1-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
samsung,pin-pud = <S3C64XX_PIN_PULL_DOWN>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- cam_port_b_io: cam-port-b-io {
+ cam_port_b_io: cam-port-b-io-pins {
samsung,pins = "gpj0-0", "gpj0-1", "gpj0-2", "gpj0-3",
"gpj0-4", "gpj0-5", "gpj0-6", "gpj0-7",
"gpj1-0", "gpj1-1", "gpj1-2", "gpj1-4";
@@ -800,42 +800,42 @@ cam_port_b_io: cam-port-b-io {
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- cam_port_b_clk_active: cam-port-b-clk-active {
+ cam_port_b_clk_active: cam-port-b-clk-active-pins {
samsung,pins = "gpj1-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
- cam_port_b_clk_idle: cam-port-b-clk-idle {
+ cam_port_b_clk_idle: cam-port-b-clk-idle-pins {
samsung,pins = "gpj1-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
samsung,pin-pud = <S3C64XX_PIN_PULL_DOWN>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- lcd_ctrl: lcd-ctrl {
+ lcd_ctrl: lcd-ctrl-pins {
samsung,pins = "gpd0-0", "gpd0-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- lcd_sync: lcd-sync {
+ lcd_sync: lcd-sync-pins {
samsung,pins = "gpf0-0", "gpf0-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- lcd_clk: lcd-clk {
+ lcd_clk: lcd-clk-pins {
samsung,pins = "gpf0-0", "gpf0-1", "gpf0-2", "gpf0-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
- lcd_data24: lcd-data-width24 {
+ lcd_data24: lcd-data-width24-pins {
samsung,pins = "gpf0-4", "gpf0-5", "gpf0-6", "gpf0-7",
"gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3",
"gpf1-4", "gpf1-5", "gpf1-6", "gpf1-7",
--
2.32.0
Convert the Samsung SoC (S3C24xx, S3C64xx, S5Pv210, Exynos) pin
controller bindings to DT schema format. Parts of description and DTS
example was copied from existing sources, so keep the license as
GPL-2.0-only.
Signed-off-by: Krzysztof Kozlowski <[email protected]>
---
.../pinctrl/samsung,pinctrl-gpio-bank.yaml | 52 +++
.../pinctrl/samsung,pinctrl-pins-cfg.yaml | 81 ++++
.../samsung,pinctrl-wakeup-interrupt.yaml | 76 ++++
.../bindings/pinctrl/samsung,pinctrl.yaml | 381 +++++++++++++++++
.../bindings/pinctrl/samsung-pinctrl.txt | 383 ------------------
MAINTAINERS | 2 +-
6 files changed, 591 insertions(+), 384 deletions(-)
create mode 100644 Documentation/devicetree/bindings/pinctrl/samsung,pinctrl-gpio-bank.yaml
create mode 100644 Documentation/devicetree/bindings/pinctrl/samsung,pinctrl-pins-cfg.yaml
create mode 100644 Documentation/devicetree/bindings/pinctrl/samsung,pinctrl-wakeup-interrupt.yaml
create mode 100644 Documentation/devicetree/bindings/pinctrl/samsung,pinctrl.yaml
delete mode 100644 Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt
diff --git a/Documentation/devicetree/bindings/pinctrl/samsung,pinctrl-gpio-bank.yaml b/Documentation/devicetree/bindings/pinctrl/samsung,pinctrl-gpio-bank.yaml
new file mode 100644
index 000000000000..f73348c54748
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/samsung,pinctrl-gpio-bank.yaml
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/samsung,pinctrl-gpio-bank.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung S3C/S5P/Exynos SoC pin controller - gpio bank
+
+maintainers:
+ - Krzysztof Kozlowski <[email protected]>
+ - Sylwester Nawrocki <[email protected]>
+ - Tomasz Figa <[email protected]>
+
+description: |
+ This is a part of device tree bindings for Samsung S3C/S5P/Exynos SoC pin
+ controller.
+
+ GPIO bank description for Samsung S3C/S5P/Exynos SoC pin controller.
+
+ See also Documentation/devicetree/bindings/pinctrl/samsung,pinctrl.yaml for
+ additional information and example.
+
+properties:
+ '#gpio-cells':
+ const: 2
+
+ gpio-controller: true
+
+ '#interrupt-cells':
+ description:
+ For GPIO banks supporting external GPIO interrupts or external wake-up
+ interrupts.
+ const: 2
+
+ interrupt-controller:
+ description:
+ For GPIO banks supporting external GPIO interrupts or external wake-up
+ interrupts.
+
+ interrupts:
+ description:
+ For GPIO banks supporting direct external wake-up interrupts (without
+ multiplexing). Number of interrupts must match number of wake-up capable
+ pins of this bank.
+ minItems: 1
+ maxItems: 8
+
+required:
+ - '#gpio-cells'
+ - gpio-controller
+
+additionalProperties: false
diff --git a/Documentation/devicetree/bindings/pinctrl/samsung,pinctrl-pins-cfg.yaml b/Documentation/devicetree/bindings/pinctrl/samsung,pinctrl-pins-cfg.yaml
new file mode 100644
index 000000000000..637f4c05b344
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/samsung,pinctrl-pins-cfg.yaml
@@ -0,0 +1,81 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/samsung,pinctrl-pins-cfg.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung S3C/S5P/Exynos SoC pin controller - pins configuration
+
+maintainers:
+ - Krzysztof Kozlowski <[email protected]>
+ - Sylwester Nawrocki <[email protected]>
+ - Tomasz Figa <[email protected]>
+
+description: |
+ This is a part of device tree bindings for Samsung S3C/S5P/Exynos SoC pin
+ controller.
+
+ Pins configuration for Samsung S3C/S5P/Exynos SoC pin controller.
+
+ See also Documentation/devicetree/bindings/pinctrl/samsung,pinctrl.yaml for
+ additional information and example.
+
+ The values used for config properties should be derived from the hardware
+ manual and these values are programmed as-is into the pin pull up/down and
+ driver strength register of the pin-controller.
+ See also include/dt-bindings/pinctrl/samsung.h with useful constants.
+
+properties:
+ samsung,pins:
+ description: |
+ List of pins to configure. For initial and sleep states, the maximum
+ number is one pin. In other cases there is no upper limit.
+
+ The pins should use lowercase names matching hardware manual, e.g. for
+ GPA0 bank: gpa0-0, gpa0-1, gpa0-2.
+ $ref: /schemas/types.yaml#/definitions/string-array
+
+ samsung,pin-function:
+ description: |
+ The pin function selection that should be applied on the pins listed in the
+ child node is specified using the "samsung,pin-function" property. The value
+ of this property that should be applied to each of the pins listed in the
+ "samsung,pins" property should be picked from the hardware manual of the SoC
+ for the specified pin group. This property is optional in the child node if
+ no specific function selection is desired for the pins listed in the child
+ node. The value of this property is used as-is to program the pin-controller
+ function selector register of the pin-bank.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 0
+ maximum: 15
+
+ samsung,pin-drv:
+ description: Drive strength configuration.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 0
+ maximum: 15
+
+ samsung,pin-pud:
+ description: Pull up/down configuration.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 1, 2, 3]
+
+ samsung,pin-val:
+ description: Initial value of pin output buffer.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 1]
+
+ samsung,pin-con-pdn:
+ description: Function in power down mode.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 1, 2, 3]
+
+ samsung,pin-pud-pdn:
+ description: Pull up/down configuration in power down mode.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 1, 2, 3]
+
+required:
+ - samsung,pins
+
+additionalProperties: false
diff --git a/Documentation/devicetree/bindings/pinctrl/samsung,pinctrl-wakeup-interrupt.yaml b/Documentation/devicetree/bindings/pinctrl/samsung,pinctrl-wakeup-interrupt.yaml
new file mode 100644
index 000000000000..eac56a087643
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/samsung,pinctrl-wakeup-interrupt.yaml
@@ -0,0 +1,76 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/samsung,pinctrl-wakeup-interrupt.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung S3C/S5P/Exynos SoC pin controller - wakeup interrupt controller
+
+maintainers:
+ - Krzysztof Kozlowski <[email protected]>
+ - Sylwester Nawrocki <[email protected]>
+ - Tomasz Figa <[email protected]>
+
+description: |
+ This is a part of device tree bindings for Samsung S3C/S5P/Exynos SoC pin
+ controller.
+
+ External wake-up interrupts for Samsung S3C/S5P/Exynos SoC pin controller.
+ Only one pin-controller device node can include external wakeup interrupts
+ child node (in other words, only one External wake-up interrupts
+ pin-controller is supported).
+
+ See also Documentation/devicetree/bindings/pinctrl/samsung,pinctrl.yaml for
+ additional information and example.
+
+properties:
+ compatible:
+ enum:
+ - samsung,s3c2410-wakeup-eint
+ - samsung,s3c2412-wakeup-eint
+ - samsung,s3c64xx-wakeup-eint
+ - samsung,s5pv210-wakeup-eint
+ - samsung,exynos4210-wakeup-eint
+ - samsung,exynos7-wakeup-eint
+
+ interrupts:
+ description:
+ Interrupt used by multiplexed external wake-up interrupts.
+ minItems: 1
+ maxItems: 6
+
+required:
+ - compatible
+ - interrupts
+
+allOf:
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - samsung,s3c2410-wakeup-eint
+ - samsung,s3c2412-wakeup-eint
+ then:
+ properties:
+ interrupts:
+ minItems: 6
+ maxItems: 6
+ else:
+ if:
+ properties:
+ compatible:
+ contains:
+ const: samsung,s3c64xx-wakeup-eint
+ then:
+ properties:
+ interrupts:
+ minItems: 4
+ maxItems: 4
+ else:
+ properties:
+ interrupts:
+ minItems: 1
+ maxItems: 1
+
+additionalProperties: false
diff --git a/Documentation/devicetree/bindings/pinctrl/samsung,pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/samsung,pinctrl.yaml
new file mode 100644
index 000000000000..37cd03805cab
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/samsung,pinctrl.yaml
@@ -0,0 +1,381 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/samsung,pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung S3C/S5P/Exynos SoC pin controller
+
+maintainers:
+ - Krzysztof Kozlowski <[email protected]>
+ - Sylwester Nawrocki <[email protected]>
+ - Tomasz Figa <[email protected]>
+
+description: |
+ This is a part of device tree bindings for Samsung S3C/S5P/Exynos SoC pin
+ controller.
+
+ Pin group settings (like drive strength, pull up/down) are available as
+ macros in include/dt-bindings/pinctrl/samsung.h.
+
+ All the pin controller nodes should be represented in the aliases node using
+ the following format 'pinctrl{n}' where n is a unique number for the alias.
+
+properties:
+ $nodename:
+ pattern: "^pinctrl(@.*)?"
+
+ compatible:
+ enum:
+ - samsung,s3c2412-pinctrl
+ - samsung,s3c2416-pinctrl
+ - samsung,s3c2440-pinctrl
+ - samsung,s3c2450-pinctrl
+ - samsung,s3c64xx-pinctrl
+ - samsung,s5pv210-pinctrl
+ - samsung,exynos3250-pinctrl
+ - samsung,exynos4210-pinctrl
+ - samsung,exynos4x12-pinctrl
+ - samsung,exynos5250-pinctrl
+ - samsung,exynos5260-pinctrl
+ - samsung,exynos5410-pinctrl
+ - samsung,exynos5420-pinctrl
+ - samsung,exynos5433-pinctrl
+ - samsung,exynos7-pinctrl
+ - samsung,exynos7885-pinctrl
+ - samsung,exynos850-pinctrl
+ - samsung,exynosautov9-pinctrl
+
+ interrupts:
+ description:
+ Required for GPIO banks supporting external GPIO interrupts.
+ maxItems: 1
+
+ power-domains:
+ maxItems: 1
+
+ reg:
+ description:
+ Second base address of the pin controller if the specific registers of
+ the pin controller are separated into the different base address.
+ Only certain banks of certain pin controller might need it.
+ minItems: 1
+ maxItems: 2
+
+ wakeup-interrupt-controller:
+ $ref: samsung,pinctrl-wakeup-interrupt.yaml
+
+patternProperties:
+ "^[a-z]+[0-9]*-gpio-bank$":
+ description:
+ Pin banks of the controller are represented by child nodes of the
+ controller node. Bank name is taken from name of the node.
+ $ref: samsung,pinctrl-gpio-bank.yaml
+
+ "^[a-z0-9-]+-pins$":
+ oneOf:
+ - $ref: samsung,pinctrl-pins-cfg.yaml
+ required:
+ - samsung,pins
+ - type: object
+ patternProperties:
+ "^[a-z0-9-]+-pins$":
+ $ref: samsung,pinctrl-pins-cfg.yaml
+
+ additionalProperties: false
+
+ "^(initial|sleep)-state$":
+ patternProperties:
+ "^(pin-[a-z0-9-]+|[a-z0-9-]+-pin)$":
+ $ref: samsung,pinctrl-pins-cfg.yaml
+
+ properties:
+ samsung,pins:
+ description: See samsung,pinctrl-pins-cfg.yaml
+ $ref: /schemas/types.yaml#/definitions/string-array
+ maxItems: 1
+
+ required:
+ - samsung,pins
+
+ unevaluatedProperties: false
+
+required:
+ - compatible
+ - reg
+
+allOf:
+ - $ref: "pinctrl.yaml#"
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: samsung,exynos5433-pinctrl
+ then:
+ properties:
+ reg:
+ minItems: 1
+ maxItems: 2
+ else:
+ properties:
+ reg:
+ minItems: 1
+ maxItems: 1
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/pinctrl/samsung.h>
+
+ pinctrl@7f008000 {
+ compatible = "samsung,s3c64xx-pinctrl";
+ reg = <0x7f008000 0x1000>;
+ interrupt-parent = <&vic1>;
+ interrupts = <21>;
+
+ wakeup-interrupt-controller {
+ compatible = "samsung,s3c64xx-wakeup-eint";
+ interrupts-extended = <&vic0 0>,
+ <&vic0 1>,
+ <&vic1 0>,
+ <&vic1 1>;
+ };
+
+ /* Pin bank with external GPIO or muxed external wake-up interrupts */
+ gpa-gpio-bank {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ // ...
+
+ uart0-data-pins {
+ samsung,pins = "gpa-0", "gpa-1";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+ };
+
+ // ...
+ };
+
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/pinctrl/samsung.h>
+
+ pinctrl@11400000 {
+ compatible = "samsung,exynos4210-pinctrl";
+ reg = <0x11400000 0x1000>;
+ interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&sleep0>;
+
+ /* Pin bank with external GPIO or muxed external wake-up interrupts */
+ gpa0-gpio-bank {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ // ...
+
+ uart0-data-pins {
+ samsung,pins = "gpa0-0", "gpa0-1";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+ };
+
+ // ...
+
+ sleep0: sleep-state {
+ gpa0-0-pin {
+ samsung,pins = "gpa0-0";
+ samsung,pin-con-pdn = <EXYNOS_PIN_PDN_INPUT>;
+ samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_NONE>;
+ };
+
+ gpa0-1-pin {
+ samsung,pins = "gpa0-1";
+ samsung,pin-con-pdn = <EXYNOS_PIN_PDN_OUT0>;
+ samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_NONE>;
+ };
+
+ // ...
+ };
+ };
+
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/pinctrl/samsung.h>
+
+ pinctrl@11000000 {
+ compatible = "samsung,exynos4210-pinctrl";
+ reg = <0x11000000 0x1000>;
+ interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
+
+ wakeup-interrupt-controller {
+ compatible = "samsung,exynos4210-wakeup-eint";
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ /* Pin bank with external GPIO or muxed external wake-up interrupts */
+ gpj0-gpio-bank {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ /* Pin bank without external interrupts */
+ gpy0-gpio-bank {
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ /* Pin bank with external direct wake-up interrupts */
+ gpx0-gpio-bank {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+ #interrupt-cells = <2>;
+ };
+
+ // ...
+
+ sd0-clk-pins {
+ samsung,pins = "gpk0-0";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+ };
+
+ sd4-bus-width8-pins {
+ part-1-pins {
+ samsung,pins = "gpk0-3", "gpk0-4",
+ "gpk0-5", "gpk0-6";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+ };
+
+ part-2-pins {
+ samsung,pins = "gpk1-3", "gpk1-4",
+ "gpk1-5", "gpk1-6";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+ };
+ };
+
+ // ...
+
+ otg-gp-pins {
+ samsung,pins = "gpx3-3";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+ samsung,pin-val = <0>;
+ };
+ };
+
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/pinctrl/samsung.h>
+
+ pinctrl@10580000 {
+ compatible = "samsung,exynos5433-pinctrl";
+ reg = <0x10580000 0x1a20>, <0x11090000 0x100>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&initial_alive>;
+
+ wakeup-interrupt-controller {
+ compatible = "samsung,exynos7-wakeup-eint";
+ interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ /* Pin bank with external direct wake-up interrupts */
+ gpa0-gpio-bank {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+ #interrupt-cells = <2>;
+ };
+
+ // ...
+
+ te-irq-pins {
+ samsung,pins = "gpf1-3";
+ samsung,pin-function = <0xf>;
+ };
+
+ // ..
+
+ initial_alive: initial-state {
+ gpa0-0-pin {
+ samsung,pins = "gpa0-0";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+ samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+ };
+
+ // ...
+ };
+ };
+
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/pinctrl/samsung.h>
+
+ pinctrl@114b0000 {
+ compatible = "samsung,exynos5433-pinctrl";
+ reg = <0x114b0000 0x1000>;
+ interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
+ power-domains = <&pd_aud>;
+
+ /* Pin bank with external GPIO or muxed external wake-up interrupts */
+ gpz0-gpio-bank {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ // ...
+
+ i2s0-bus-pins {
+ samsung,pins = "gpz0-0", "gpz0-1", "gpz0-2", "gpz0-3",
+ "gpz0-4", "gpz0-5", "gpz0-6";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+ };
+
+ // ...
+ };
diff --git a/Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt
deleted file mode 100644
index 9e70edceb21b..000000000000
--- a/Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt
+++ /dev/null
@@ -1,383 +0,0 @@
-Samsung GPIO and Pin Mux/Config controller
-
-Samsung's ARM based SoC's integrates a GPIO and Pin mux/config hardware
-controller. It controls the input/output settings on the available pads/pins
-and also provides ability to multiplex and configure the output of various
-on-chip controllers onto these pads.
-
-Required Properties:
-- compatible: should be one of the following.
- - "samsung,s3c2412-pinctrl": for S3C2412-compatible pin-controller,
- - "samsung,s3c2416-pinctrl": for S3C2416-compatible pin-controller,
- - "samsung,s3c2440-pinctrl": for S3C2440-compatible pin-controller,
- - "samsung,s3c2450-pinctrl": for S3C2450-compatible pin-controller,
- - "samsung,s3c64xx-pinctrl": for S3C64xx-compatible pin-controller,
- - "samsung,s5pv210-pinctrl": for S5PV210-compatible pin-controller,
- - "samsung,exynos3250-pinctrl": for Exynos3250 compatible pin-controller.
- - "samsung,exynos4210-pinctrl": for Exynos4210 compatible pin-controller.
- - "samsung,exynos4x12-pinctrl": for Exynos4x12 compatible pin-controller.
- - "samsung,exynos5250-pinctrl": for Exynos5250 compatible pin-controller.
- - "samsung,exynos5260-pinctrl": for Exynos5260 compatible pin-controller.
- - "samsung,exynos5410-pinctrl": for Exynos5410 compatible pin-controller.
- - "samsung,exynos5420-pinctrl": for Exynos5420 compatible pin-controller.
- - "samsung,exynos5433-pinctrl": for Exynos5433 compatible pin-controller.
- - "samsung,exynos7-pinctrl": for Exynos7 compatible pin-controller.
- - "samsung,exynos7885-pinctrl": for Exynos7885 compatible pin-controller.
- - "samsung,exynos850-pinctrl": for Exynos850 compatible pin-controller.
- - "samsung,exynosautov9-pinctrl": for ExynosAutov9 compatible pin-controller.
-
-- reg: Base address of the pin controller hardware module and length of
- the address space it occupies.
-
- - reg: Second base address of the pin controller if the specific registers
- of the pin controller are separated into the different base address.
-
- Eg: GPF[1-5] of Exynos5433 are separated into the two base address.
- - First base address is for GPAx and GPF[1-5] external interrupt
- registers.
- - Second base address is for GPF[1-5] pinctrl registers.
-
- pinctrl_0: pinctrl@10580000 {
- compatible = "samsung,exynos5433-pinctrl";
- reg = <0x10580000 0x1a20>, <0x11090000 0x100>;
-
- wakeup-interrupt-controller {
- compatible = "samsung,exynos7-wakeup-eint";
- interrupts = <0 16 0>;
- };
- };
-
-- Pin banks as child nodes: Pin banks of the controller are represented by child
- nodes of the controller node. Bank name is taken from name of the node. Each
- bank node must contain following properties:
-
- - gpio-controller: identifies the node as a gpio controller and pin bank.
- - #gpio-cells: number of cells in GPIO specifier. Since the generic GPIO
- binding is used, the amount of cells must be specified as 2. See the below
- mentioned gpio binding representation for description of particular cells.
-
- Eg: <&gpx2 6 0>
- <[phandle of the gpio controller node]
- [pin number within the gpio controller]
- [flags]>
-
- Values for gpio specifier:
- - Pin number: is a value between 0 to 7.
- - Flags: 0 - Active High
- 1 - Active Low
-
-- Pin mux/config groups as child nodes: The pin mux (selecting pin function
- mode) and pin config (pull up/down, driver strength) settings are represented
- as child nodes of the pin-controller node. There should be at least one
- child node and there is no limit on the count of these child nodes. It is
- also possible for a child node to consist of several further child nodes
- to allow grouping multiple pinctrl groups into one. The format of second
- level child nodes is exactly the same as for first level ones and is
- described below.
-
- The child node should contain a list of pin(s) on which a particular pin
- function selection or pin configuration (or both) have to applied. This
- list of pins is specified using the property name "samsung,pins". There
- should be at least one pin specified for this property and there is no upper
- limit on the count of pins that can be specified. The pins are specified
- using pin names which are derived from the hardware manual of the SoC. As
- an example, the pins in GPA0 bank of the pin controller can be represented
- as "gpa0-0", "gpa0-1", "gpa0-2" and so on. The names should be in lower case.
- The format of the pin names should be (as per the hardware manual)
- "[pin bank name]-[pin number within the bank]".
-
- The pin function selection that should be applied on the pins listed in the
- child node is specified using the "samsung,pin-function" property. The value
- of this property that should be applied to each of the pins listed in the
- "samsung,pins" property should be picked from the hardware manual of the SoC
- for the specified pin group. This property is optional in the child node if
- no specific function selection is desired for the pins listed in the child
- node. The value of this property is used as-is to program the pin-controller
- function selector register of the pin-bank.
-
- The child node can also optionally specify one or more of the pin
- configuration that should be applied on all the pins listed in the
- "samsung,pins" property of the child node. The following pin configuration
- properties are supported.
-
- - samsung,pin-val: Initial value of pin output buffer.
- - samsung,pin-pud: Pull up/down configuration.
- - samsung,pin-drv: Drive strength configuration.
- - samsung,pin-pud-pdn: Pull up/down configuration in power down mode.
- - samsung,pin-drv-pdn: Drive strength configuration in power down mode.
-
- The values specified by these config properties should be derived from the
- hardware manual and these values are programmed as-is into the pin
- pull up/down and driver strength register of the pin-controller.
-
- Note: A child should include at least a pin function selection property or
- pin configuration property (one or more) or both.
-
- The client nodes that require a particular pin function selection and/or
- pin configuration should use the bindings listed in the "pinctrl-bindings.txt"
- file.
-
-External GPIO and Wakeup Interrupts:
-
-The controller supports two types of external interrupts over gpio. The first
-is the external gpio interrupt and second is the external wakeup interrupts.
-The difference between the two is that the external wakeup interrupts can be
-used as system wakeup events.
-
-A. External GPIO Interrupts: For supporting external gpio interrupts, the
- following properties should be specified in the pin-controller device node.
-
- - interrupts: interrupt specifier for the controller. The format and value of
- the interrupt specifier depends on the interrupt parent for the controller.
-
- In addition, following properties must be present in node of every bank
- of pins supporting GPIO interrupts:
-
- - interrupt-controller: identifies the controller node as interrupt-parent.
- - #interrupt-cells: the value of this property should be 2.
- - First Cell: represents the external gpio interrupt number local to the
- external gpio interrupt space of the controller.
- - Second Cell: flags to identify the type of the interrupt
- - 1 = rising edge triggered
- - 2 = falling edge triggered
- - 3 = rising and falling edge triggered
- - 4 = high level triggered
- - 8 = low level triggered
-
-B. External Wakeup Interrupts: For supporting external wakeup interrupts, a
- child node representing the external wakeup interrupt controller should be
- included in the pin-controller device node.
-
- Only one pin-controller device node can include external wakeup interrupts
- child node (in other words, only one External Wakeup Interrupts
- pin-controller is supported).
-
- This child node should include following properties:
-
- - compatible: identifies the type of the external wakeup interrupt controller
- The possible values are:
- - samsung,s3c2410-wakeup-eint: represents wakeup interrupt controller
- found on Samsung S3C24xx SoCs except S3C2412 and S3C2413,
- - samsung,s3c2412-wakeup-eint: represents wakeup interrupt controller
- found on Samsung S3C2412 and S3C2413 SoCs,
- - samsung,s3c64xx-wakeup-eint: represents wakeup interrupt controller
- found on Samsung S3C64xx SoCs,
- - samsung,s5pv210-wakeup-eint: represents wakeup interrupt controller
- found on Samsung S5Pv210 SoCs,
- - samsung,exynos4210-wakeup-eint: represents wakeup interrupt controller
- found on Samsung Exynos4210 and S5PC110/S5PV210 SoCs.
- - samsung,exynos7-wakeup-eint: represents wakeup interrupt controller
- found on Samsung Exynos7 SoC.
- - interrupts: interrupt used by multiplexed wakeup interrupts.
-
- In addition, following properties must be present in node of every bank
- of pins supporting wake-up interrupts:
-
- - interrupt-controller: identifies the node as interrupt-parent.
- - #interrupt-cells: the value of this property should be 2
- - First Cell: represents the external wakeup interrupt number local to
- the external wakeup interrupt space of the controller.
- - Second Cell: flags to identify the type of the interrupt
- - 1 = rising edge triggered
- - 2 = falling edge triggered
- - 3 = rising and falling edge triggered
- - 4 = high level triggered
- - 8 = low level triggered
-
- Node of every bank of pins supporting direct wake-up interrupts (without
- multiplexing) must contain following properties:
-
- - interrupts: interrupts of the interrupt parent which are used for external
- wakeup interrupts from pins of the bank, must contain interrupts for all
- pins of the bank.
-
-Aliases:
-
-All the pin controller nodes should be represented in the aliases node using
-the following format 'pinctrl{n}' where n is a unique number for the alias.
-
-Aliases for controllers compatible with "samsung,exynos7-pinctrl":
-- pinctrl0: pin controller of ALIVE block,
-- pinctrl1: pin controller of BUS0 block,
-- pinctrl2: pin controller of NFC block,
-- pinctrl3: pin controller of TOUCH block,
-- pinctrl4: pin controller of FF block,
-- pinctrl5: pin controller of ESE block,
-- pinctrl6: pin controller of FSYS0 block,
-- pinctrl7: pin controller of FSYS1 block,
-- pinctrl8: pin controller of BUS1 block,
-- pinctrl9: pin controller of AUDIO block,
-
-Example: A pin-controller node with pin banks:
-
- pinctrl_0: pinctrl@11400000 {
- compatible = "samsung,exynos4210-pinctrl";
- reg = <0x11400000 0x1000>;
- interrupts = <0 47 0>;
-
- /* ... */
-
- /* Pin bank without external interrupts */
- gpy0: gpy0 {
- gpio-controller;
- #gpio-cells = <2>;
- };
-
- /* ... */
-
- /* Pin bank with external GPIO or muxed wake-up interrupts */
- gpj0: gpj0 {
- gpio-controller;
- #gpio-cells = <2>;
-
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
- /* ... */
-
- /* Pin bank with external direct wake-up interrupts */
- gpx0: gpx0 {
- gpio-controller;
- #gpio-cells = <2>;
-
- interrupt-controller;
- interrupt-parent = <&gic>;
- interrupts = <0 16 0>, <0 17 0>, <0 18 0>, <0 19 0>,
- <0 20 0>, <0 21 0>, <0 22 0>, <0 23 0>;
- #interrupt-cells = <2>;
- };
-
- /* ... */
- };
-
-Example 1: A pin-controller node with pin groups.
-
- #include <dt-bindings/pinctrl/samsung.h>
-
- pinctrl_0: pinctrl@11400000 {
- compatible = "samsung,exynos4210-pinctrl";
- reg = <0x11400000 0x1000>;
- interrupts = <0 47 0>;
-
- /* ... */
-
- uart0_data: uart0-data {
- samsung,pins = "gpa0-0", "gpa0-1";
- samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
- samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
- samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
- };
-
- uart0_fctl: uart0-fctl {
- samsung,pins = "gpa0-2", "gpa0-3";
- samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
- samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
- samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
- };
-
- uart1_data: uart1-data {
- samsung,pins = "gpa0-4", "gpa0-5";
- samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
- samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
- samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
- };
-
- uart1_fctl: uart1-fctl {
- samsung,pins = "gpa0-6", "gpa0-7";
- samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
- samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
- samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
- };
-
- i2c2_bus: i2c2-bus {
- samsung,pins = "gpa0-6", "gpa0-7";
- samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
- samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
- samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
- };
-
- sd4_bus8: sd4-bus-width8 {
- part-1 {
- samsung,pins = "gpk0-3", "gpk0-4",
- "gpk0-5", "gpk0-6";
- samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
- samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
- samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
- };
- part-2 {
- samsung,pins = "gpk1-3", "gpk1-4",
- "gpk1-5", "gpk1-6";
- samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
- samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
- samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
- };
- };
- };
-
-Example 2: A pin-controller node with external wakeup interrupt controller node.
-
- pinctrl_1: pinctrl@11000000 {
- compatible = "samsung,exynos4210-pinctrl";
- reg = <0x11000000 0x1000>;
- interrupts = <0 46 0>
-
- /* ... */
-
- wakeup-interrupt-controller {
- compatible = "samsung,exynos4210-wakeup-eint";
- interrupt-parent = <&gic>;
- interrupts = <0 32 0>;
- };
- };
-
-Example 3: A uart client node that supports 'default' and 'flow-control' states.
-
- uart@13800000 {
- compatible = "samsung,exynos4210-uart";
- reg = <0x13800000 0x100>;
- interrupts = <0 52 0>;
- pinctrl-names = "default", "flow-control;
- pinctrl-0 = <&uart0_data>;
- pinctrl-1 = <&uart0_data>, <&uart0_fctl>;
- };
-
-Example 4: Set up the default pin state for uart controller.
-
- static int s3c24xx_serial_probe(struct platform_device *pdev) {
- struct pinctrl *pinctrl;
-
- /* ... */
-
- pinctrl = devm_pinctrl_get_select_default(&pdev->dev);
- }
-
-Example 5: A display port client node that supports 'default' pinctrl state
- and gpio binding.
-
- display-port-controller {
- /* ... */
-
- samsung,hpd-gpio = <&gpx2 6 0>;
- pinctrl-names = "default";
- pinctrl-0 = <&dp_hpd>;
- };
-
-Example 6: Request the gpio for display port controller
-
- static int exynos_dp_probe(struct platform_device *pdev)
- {
- int hpd_gpio, ret;
- struct device *dev = &pdev->dev;
- struct device_node *dp_node = dev->of_node;
-
- /* ... */
-
- hpd_gpio = of_get_named_gpio(dp_node, "samsung,hpd-gpio", 0);
-
- /* ... */
-
- ret = devm_gpio_request_one(&pdev->dev, hpd_gpio, GPIOF_IN,
- "hpd_gpio");
- /* ... */
- }
diff --git a/MAINTAINERS b/MAINTAINERS
index 5ea5655a29c3..33005c10e956 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -15242,7 +15242,7 @@ L: [email protected]
S: Maintained
Q: https://patchwork.kernel.org/project/linux-samsung-soc/list/
T: git git://git.kernel.org/pub/scm/linux/kernel/git/pinctrl/samsung.git
-F: Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt
+F: Documentation/devicetree/bindings/pinctrl/samsung,pinctrl*yaml
F: drivers/pinctrl/samsung/
F: include/dt-bindings/pinctrl/samsung.h
--
2.32.0
Align the pin controller related nodes with dtschema. No functional
change expected.
Signed-off-by: Krzysztof Kozlowski <[email protected]>
---
arch/arm/boot/dts/s3c6410-mini6410.dts | 4 +-
arch/arm/boot/dts/s3c64xx-pinctrl.dtsi | 210 ++++++++++++-------------
2 files changed, 107 insertions(+), 107 deletions(-)
diff --git a/arch/arm/boot/dts/s3c6410-mini6410.dts b/arch/arm/boot/dts/s3c6410-mini6410.dts
index 285555b9ed94..17097da36f5e 100644
--- a/arch/arm/boot/dts/s3c6410-mini6410.dts
+++ b/arch/arm/boot/dts/s3c6410-mini6410.dts
@@ -193,12 +193,12 @@ &uart3 {
};
&pinctrl0 {
- gpio_leds: gpio-leds {
+ gpio_leds: gpio-leds-pins {
samsung,pins = "gpk-4", "gpk-5", "gpk-6", "gpk-7";
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
- gpio_keys: gpio-keys {
+ gpio_keys: gpio-keys-pins {
samsung,pins = "gpn-0", "gpn-1", "gpn-2", "gpn-3",
"gpn-4", "gpn-5", "gpl-11", "gpl-12";
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
diff --git a/arch/arm/boot/dts/s3c64xx-pinctrl.dtsi b/arch/arm/boot/dts/s3c64xx-pinctrl.dtsi
index 8e9594d64b57..0a3186d57cb5 100644
--- a/arch/arm/boot/dts/s3c64xx-pinctrl.dtsi
+++ b/arch/arm/boot/dts/s3c64xx-pinctrl.dtsi
@@ -16,111 +16,111 @@ &pinctrl0 {
* Pin banks
*/
- gpa: gpa {
+ gpa: gpa-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
- gpb: gpb {
+ gpb: gpb-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
- gpc: gpc {
+ gpc: gpc-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
- gpd: gpd {
+ gpd: gpd-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
- gpe: gpe {
+ gpe: gpe-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
};
- gpf: gpf {
+ gpf: gpf-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
- gpg: gpg {
+ gpg: gpg-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
- gph: gph {
+ gph: gph-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
- gpi: gpi {
+ gpi: gpi-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
};
- gpj: gpj {
+ gpj: gpj-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
};
- gpk: gpk {
+ gpk: gpk-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
};
- gpl: gpl {
+ gpl: gpl-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
- gpm: gpm {
+ gpm: gpm-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
- gpn: gpn {
+ gpn: gpn-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
- gpo: gpo {
+ gpo: gpo-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
- gpp: gpp {
+ gpp: gpp-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
- gpq: gpq {
+ gpq: gpq-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
@@ -131,225 +131,225 @@ gpq: gpq {
* Pin groups
*/
- uart0_data: uart0-data {
+ uart0_data: uart0-data-pins {
samsung,pins = "gpa-0", "gpa-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
- uart0_fctl: uart0-fctl {
+ uart0_fctl: uart0-fctl-pins {
samsung,pins = "gpa-2", "gpa-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
- uart1_data: uart1-data {
+ uart1_data: uart1-data-pins {
samsung,pins = "gpa-4", "gpa-5";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
- uart1_fctl: uart1-fctl {
+ uart1_fctl: uart1-fctl-pins {
samsung,pins = "gpa-6", "gpa-7";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
- uart2_data: uart2-data {
+ uart2_data: uart2-data-pins {
samsung,pins = "gpb-0", "gpb-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
- uart3_data: uart3-data {
+ uart3_data: uart3-data-pins {
samsung,pins = "gpb-2", "gpb-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
- ext_dma_0: ext-dma-0 {
+ ext_dma_0: ext-dma-0-pins {
samsung,pins = "gpb-0", "gpb-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
- ext_dma_1: ext-dma-1 {
+ ext_dma_1: ext-dma-1-pins {
samsung,pins = "gpb-2", "gpb-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
- irda_data_0: irda-data-0 {
+ irda_data_0: irda-data-0-pins {
samsung,pins = "gpb-0", "gpb-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
- irda_data_1: irda-data-1 {
+ irda_data_1: irda-data-1-pins {
samsung,pins = "gpb-2", "gpb-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
- irda_sdbw: irda-sdbw {
+ irda_sdbw: irda-sdbw-pins {
samsung,pins = "gpb-4";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
- i2c0_bus: i2c0-bus {
+ i2c0_bus: i2c0-bus-pins {
samsung,pins = "gpb-5", "gpb-6";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
};
- i2c1_bus: i2c1-bus {
+ i2c1_bus: i2c1-bus-pins {
/* S3C6410-only */
samsung,pins = "gpb-2", "gpb-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_6>;
samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
};
- spi0_bus: spi0-bus {
+ spi0_bus: spi0-bus-pins {
samsung,pins = "gpc-0", "gpc-1", "gpc-2";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
};
- spi0_cs: spi0-cs {
+ spi0_cs: spi0-cs-pins {
samsung,pins = "gpc-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
- spi1_bus: spi1-bus {
+ spi1_bus: spi1-bus-pins {
samsung,pins = "gpc-4", "gpc-5", "gpc-6";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
};
- spi1_cs: spi1-cs {
+ spi1_cs: spi1-cs-pins {
samsung,pins = "gpc-7";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
- sd0_cmd: sd0-cmd {
+ sd0_cmd: sd0-cmd-pins {
samsung,pins = "gpg-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
- sd0_clk: sd0-clk {
+ sd0_clk: sd0-clk-pins {
samsung,pins = "gpg-0";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
- sd0_bus1: sd0-bus1 {
+ sd0_bus1: sd0-bus1-pins {
samsung,pins = "gpg-2";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
- sd0_bus4: sd0-bus4 {
+ sd0_bus4: sd0-bus4-pins {
samsung,pins = "gpg-2", "gpg-3", "gpg-4", "gpg-5";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
- sd0_cd: sd0-cd {
+ sd0_cd: sd0-cd-pins {
samsung,pins = "gpg-6";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
};
- sd1_cmd: sd1-cmd {
+ sd1_cmd: sd1-cmd-pins {
samsung,pins = "gph-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
- sd1_clk: sd1-clk {
+ sd1_clk: sd1-clk-pins {
samsung,pins = "gph-0";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
- sd1_bus1: sd1-bus1 {
+ sd1_bus1: sd1-bus1-pins {
samsung,pins = "gph-2";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
- sd1_bus4: sd1-bus4 {
+ sd1_bus4: sd1-bus4-pins {
samsung,pins = "gph-2", "gph-3", "gph-4", "gph-5";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
- sd1_bus8: sd1-bus8 {
+ sd1_bus8: sd1-bus8-pins {
samsung,pins = "gph-2", "gph-3", "gph-4", "gph-5",
"gph-6", "gph-7", "gph-8", "gph-9";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
- sd1_cd: sd1-cd {
+ sd1_cd: sd1-cd-pins {
samsung,pins = "gpg-6";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
};
- sd2_cmd: sd2-cmd {
+ sd2_cmd: sd2-cmd-pins {
samsung,pins = "gpc-4";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
- sd2_clk: sd2-clk {
+ sd2_clk: sd2-clk-pins {
samsung,pins = "gpc-5";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
- sd2_bus1: sd2-bus1 {
+ sd2_bus1: sd2-bus1-pins {
samsung,pins = "gph-6";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
- sd2_bus4: sd2-bus4 {
+ sd2_bus4: sd2-bus4-pins {
samsung,pins = "gph-6", "gph-7", "gph-8", "gph-9";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
- i2s0_bus: i2s0-bus {
+ i2s0_bus: i2s0-bus-pins {
samsung,pins = "gpd-0", "gpd-2", "gpd-3", "gpd-4";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
- i2s0_cdclk: i2s0-cdclk {
+ i2s0_cdclk: i2s0-cdclk-pins {
samsung,pins = "gpd-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
- i2s1_bus: i2s1-bus {
+ i2s1_bus: i2s1-bus-pins {
samsung,pins = "gpe-0", "gpe-2", "gpe-3", "gpe-4";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
- i2s1_cdclk: i2s1-cdclk {
+ i2s1_cdclk: i2s1-cdclk-pins {
samsung,pins = "gpe-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
- i2s2_bus: i2s2-bus {
+ i2s2_bus: i2s2-bus-pins {
/* S3C6410-only */
samsung,pins = "gpc-4", "gpc-5", "gpc-6", "gph-6",
"gph-8", "gph-9";
@@ -357,50 +357,50 @@ i2s2_bus: i2s2-bus {
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
- i2s2_cdclk: i2s2-cdclk {
+ i2s2_cdclk: i2s2-cdclk-pins {
/* S3C6410-only */
samsung,pins = "gph-7";
samsung,pin-function = <EXYNOS_PIN_FUNC_5>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
- pcm0_bus: pcm0-bus {
+ pcm0_bus: pcm0-bus-pins {
samsung,pins = "gpd-0", "gpd-2", "gpd-3", "gpd-4";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
- pcm0_extclk: pcm0-extclk {
+ pcm0_extclk: pcm0-extclk-pins {
samsung,pins = "gpd-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
- pcm1_bus: pcm1-bus {
+ pcm1_bus: pcm1-bus-pins {
samsung,pins = "gpe-0", "gpe-2", "gpe-3", "gpe-4";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
- pcm1_extclk: pcm1-extclk {
+ pcm1_extclk: pcm1-extclk-pins {
samsung,pins = "gpe-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
- ac97_bus_0: ac97-bus-0 {
+ ac97_bus_0: ac97-bus-0-pins {
samsung,pins = "gpd-0", "gpd-1", "gpd-2", "gpd-3", "gpd-4";
samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
- ac97_bus_1: ac97-bus-1 {
+ ac97_bus_1: ac97-bus-1-pins {
samsung,pins = "gpe-0", "gpe-1", "gpe-2", "gpe-3", "gpe-4";
samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
- cam_port: cam-port {
+ cam_port: cam-port-pins {
samsung,pins = "gpf-0", "gpf-1", "gpf-2", "gpf-4",
"gpf-5", "gpf-6", "gpf-7", "gpf-8",
"gpf-9", "gpf-10", "gpf-11", "gpf-12";
@@ -408,242 +408,242 @@ cam_port: cam-port {
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
- cam_rst: cam-rst {
+ cam_rst: cam-rst-pins {
samsung,pins = "gpf-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
- cam_field: cam-field {
+ cam_field: cam-field-pins {
/* S3C6410-only */
samsung,pins = "gpb-4";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
- pwm_extclk: pwm-extclk {
+ pwm_extclk: pwm-extclk-pins {
samsung,pins = "gpf-13";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
- pwm0_out: pwm0-out {
+ pwm0_out: pwm0-out-pins {
samsung,pins = "gpf-14";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
- pwm1_out: pwm1-out {
+ pwm1_out: pwm1-out-pins {
samsung,pins = "gpf-15";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
- clkout0: clkout-0 {
+ clkout0: clkout-0-pins {
samsung,pins = "gpf-14";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
- keypad_col0_0: keypad-col0-0 {
+ keypad_col0_0: keypad-col0-0-pins {
samsung,pins = "gph-0";
samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
- keypad_col1_0: keypad-col1-0 {
+ keypad_col1_0: keypad-col1-0-pins {
samsung,pins = "gph-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
- keypad_col2_0: keypad-col2-0 {
+ keypad_col2_0: keypad-col2-0-pins {
samsung,pins = "gph-2";
samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
- keypad_col3_0: keypad-col3-0 {
+ keypad_col3_0: keypad-col3-0-pins {
samsung,pins = "gph-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
- keypad_col4_0: keypad-col4-0 {
+ keypad_col4_0: keypad-col4-0-pins {
samsung,pins = "gph-4";
samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
- keypad_col5_0: keypad-col5-0 {
+ keypad_col5_0: keypad-col5-0-pins {
samsung,pins = "gph-5";
samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
- keypad_col6_0: keypad-col6-0 {
+ keypad_col6_0: keypad-col6-0-pins {
samsung,pins = "gph-6";
samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
- keypad_col7_0: keypad-col7-0 {
+ keypad_col7_0: keypad-col7-0-pins {
samsung,pins = "gph-7";
samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
- keypad_col0_1: keypad-col0-1 {
+ keypad_col0_1: keypad-col0-1-pins {
samsung,pins = "gpl-0";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
- keypad_col1_1: keypad-col1-1 {
+ keypad_col1_1: keypad-col1-1-pins {
samsung,pins = "gpl-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
- keypad_col2_1: keypad-col2-1 {
+ keypad_col2_1: keypad-col2-1-pins {
samsung,pins = "gpl-2";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
- keypad_col3_1: keypad-col3-1 {
+ keypad_col3_1: keypad-col3-1-pins {
samsung,pins = "gpl-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
- keypad_col4_1: keypad-col4-1 {
+ keypad_col4_1: keypad-col4-1-pins {
samsung,pins = "gpl-4";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
- keypad_col5_1: keypad-col5-1 {
+ keypad_col5_1: keypad-col5-1-pins {
samsung,pins = "gpl-5";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
- keypad_col6_1: keypad-col6-1 {
+ keypad_col6_1: keypad-col6-1-pins {
samsung,pins = "gpl-6";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
- keypad_col7_1: keypad-col7-1 {
+ keypad_col7_1: keypad-col7-1-pins {
samsung,pins = "gpl-7";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
- keypad_row0_0: keypad-row0-0 {
+ keypad_row0_0: keypad-row0-0-pins {
samsung,pins = "gpk-8";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
- keypad_row1_0: keypad-row1-0 {
+ keypad_row1_0: keypad-row1-0-pins {
samsung,pins = "gpk-9";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
- keypad_row2_0: keypad-row2-0 {
+ keypad_row2_0: keypad-row2-0-pins {
samsung,pins = "gpk-10";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
- keypad_row3_0: keypad-row3-0 {
+ keypad_row3_0: keypad-row3-0-pins {
samsung,pins = "gpk-11";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
- keypad_row4_0: keypad-row4-0 {
+ keypad_row4_0: keypad-row4-0-pins {
samsung,pins = "gpk-12";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
- keypad_row5_0: keypad-row5-0 {
+ keypad_row5_0: keypad-row5-0-pins {
samsung,pins = "gpk-13";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
- keypad_row6_0: keypad-row6-0 {
+ keypad_row6_0: keypad-row6-0-pins {
samsung,pins = "gpk-14";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
- keypad_row7_0: keypad-row7-0 {
+ keypad_row7_0: keypad-row7-0-pins {
samsung,pins = "gpk-15";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
- keypad_row0_1: keypad-row0-1 {
+ keypad_row0_1: keypad-row0-1-pins {
samsung,pins = "gpn-0";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
- keypad_row1_1: keypad-row1-1 {
+ keypad_row1_1: keypad-row1-1-pins {
samsung,pins = "gpn-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
- keypad_row2_1: keypad-row2-1 {
+ keypad_row2_1: keypad-row2-1-pins {
samsung,pins = "gpn-2";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
- keypad_row3_1: keypad-row3-1 {
+ keypad_row3_1: keypad-row3-1-pins {
samsung,pins = "gpn-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
- keypad_row4_1: keypad-row4-1 {
+ keypad_row4_1: keypad-row4-1-pins {
samsung,pins = "gpn-4";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
- keypad_row5_1: keypad-row5-1 {
+ keypad_row5_1: keypad-row5-1-pins {
samsung,pins = "gpn-5";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
- keypad_row6_1: keypad-row6-1 {
+ keypad_row6_1: keypad-row6-1-pins {
samsung,pins = "gpn-6";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
- keypad_row7_1: keypad-row7-1 {
+ keypad_row7_1: keypad-row7-1-pins {
samsung,pins = "gpn-7";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
- lcd_ctrl: lcd-ctrl {
+ lcd_ctrl: lcd-ctrl-pins {
samsung,pins = "gpj-8", "gpj-9", "gpj-10", "gpj-11";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
- lcd_data16: lcd-data-width16 {
+ lcd_data16: lcd-data-width16-pins {
samsung,pins = "gpi-3", "gpi-4", "gpi-5", "gpi-6",
"gpi-7", "gpi-10", "gpi-11", "gpi-12",
"gpi-13", "gpi-14", "gpi-15", "gpj-3",
@@ -652,7 +652,7 @@ lcd_data16: lcd-data-width16 {
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
- lcd_data18: lcd-data-width18 {
+ lcd_data18: lcd-data-width18-pins {
samsung,pins = "gpi-2", "gpi-3", "gpi-4", "gpi-5",
"gpi-6", "gpi-7", "gpi-10", "gpi-11",
"gpi-12", "gpi-13", "gpi-14", "gpi-15",
@@ -662,7 +662,7 @@ lcd_data18: lcd-data-width18 {
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
- lcd_data24: lcd-data-width24 {
+ lcd_data24: lcd-data-width24-pins {
samsung,pins = "gpi-0", "gpi-1", "gpi-2", "gpi-3",
"gpi-4", "gpi-5", "gpi-6", "gpi-7",
"gpi-8", "gpi-9", "gpi-10", "gpi-11",
@@ -673,7 +673,7 @@ lcd_data24: lcd-data-width24 {
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
- hsi_bus: hsi-bus {
+ hsi_bus: hsi-bus-pins {
samsung,pins = "gpk-0", "gpk-1", "gpk-2", "gpk-3",
"gpk-4", "gpk-5", "gpk-6", "gpk-7";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
--
2.32.0
On Fri, 31 Dec 2021 at 18:23, Krzysztof Kozlowski
<[email protected]> wrote:
>
> Align the pin controller related nodes with dtschema. No functional
> change expected.
>
> Signed-off-by: Krzysztof Kozlowski <[email protected]>
> ---
Reviewed-by: Sam Protsenko <[email protected]>
> .../boot/dts/exynos/exynos850-pinctrl.dtsi | 52 +++++++++----------
> 1 file changed, 26 insertions(+), 26 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/exynos/exynos850-pinctrl.dtsi b/arch/arm64/boot/dts/exynos/exynos850-pinctrl.dtsi
> index f576b29c9b16..a71acf358d2d 100644
> --- a/arch/arm64/boot/dts/exynos/exynos850-pinctrl.dtsi
> +++ b/arch/arm64/boot/dts/exynos/exynos850-pinctrl.dtsi
> @@ -13,7 +13,7 @@
> #include <dt-bindings/pinctrl/samsung.h>
>
> &pinctrl_alive {
> - gpa0: gpa0 {
> + gpa0: gpa0-gpio-bank {
> gpio-controller;
> #gpio-cells = <2>;
>
> @@ -30,7 +30,7 @@ gpa0: gpa0 {
> <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
> };
>
> - gpa1: gpa1 {
> + gpa1: gpa1-gpio-bank {
> gpio-controller;
> #gpio-cells = <2>;
>
> @@ -47,7 +47,7 @@ gpa1: gpa1 {
> <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
> };
>
> - gpa2: gpa2 {
> + gpa2: gpa2-gpio-bank {
> gpio-controller;
> #gpio-cells = <2>;
>
> @@ -64,7 +64,7 @@ gpa2: gpa2 {
> <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
> };
>
> - gpa3: gpa3 {
> + gpa3: gpa3-gpio-bank {
> gpio-controller;
> #gpio-cells = <2>;
>
> @@ -81,7 +81,7 @@ gpa3: gpa3 {
> <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
> };
>
> - gpa4: gpa4 {
> + gpa4: gpa4-gpio-bank {
> gpio-controller;
> #gpio-cells = <2>;
>
> @@ -94,7 +94,7 @@ gpa4: gpa4 {
> <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
> };
>
> - gpq0: gpq0 {
> + gpq0: gpq0-gpio-bank {
> gpio-controller;
> #gpio-cells = <2>;
>
> @@ -134,7 +134,7 @@ uart1_pins: uart1-pins {
> };
>
> &pinctrl_cmgp {
> - gpm0: gpm0 {
> + gpm0: gpm0-gpio-bank {
> gpio-controller;
> #gpio-cells = <2>;
>
> @@ -144,7 +144,7 @@ gpm0: gpm0 {
> interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
> };
>
> - gpm1: gpm1 {
> + gpm1: gpm1-gpio-bank {
> gpio-controller;
> #gpio-cells = <2>;
>
> @@ -154,7 +154,7 @@ gpm1: gpm1 {
> interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
> };
>
> - gpm2: gpm2 {
> + gpm2: gpm2-gpio-bank {
> gpio-controller;
> #gpio-cells = <2>;
>
> @@ -164,7 +164,7 @@ gpm2: gpm2 {
> interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
> };
>
> - gpm3: gpm3 {
> + gpm3: gpm3-gpio-bank {
> gpio-controller;
> #gpio-cells = <2>;
>
> @@ -174,7 +174,7 @@ gpm3: gpm3 {
> interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
> };
>
> - gpm4: gpm4 {
> + gpm4: gpm4-gpio-bank {
> gpio-controller;
> #gpio-cells = <2>;
>
> @@ -184,7 +184,7 @@ gpm4: gpm4 {
> interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
> };
>
> - gpm5: gpm5 {
> + gpm5: gpm5-gpio-bank {
> gpio-controller;
> #gpio-cells = <2>;
>
> @@ -256,7 +256,7 @@ spi2_pins: spi2-pins {
> };
>
> &pinctrl_aud {
> - gpb0: gpb0 {
> + gpb0: gpb0-gpio-bank {
> gpio-controller;
> #gpio-cells = <2>;
>
> @@ -264,7 +264,7 @@ gpb0: gpb0 {
> #interrupt-cells = <2>;
> };
>
> - gpb1: gpb1 {
> + gpb1: gpb1-gpio-bank {
> gpio-controller;
> #gpio-cells = <2>;
>
> @@ -322,7 +322,7 @@ aud_fm_idle_pins: aud-fm-idle-pins {
> };
>
> &pinctrl_hsi {
> - gpf2: gpf2 {
> + gpf2: gpf2-gpio-bank {
> gpio-controller;
> #gpio-cells = <2>;
>
> @@ -367,7 +367,7 @@ sd2_pdn_pins: sd2-pdn-pins {
> };
>
> &pinctrl_core {
> - gpf0: gpf0 {
> + gpf0: gpf0-gpio-bank {
> gpio-controller;
> #gpio-cells = <2>;
>
> @@ -375,7 +375,7 @@ gpf0: gpf0 {
> #interrupt-cells = <2>;
> };
>
> - gpf1: gpf1 {
> + gpf1: gpf1-gpio-bank {
> gpio-controller;
> #gpio-cells = <2>;
>
> @@ -434,7 +434,7 @@ sd0_bus8_pins: sd0-bus8-pins {
> };
>
> &pinctrl_peri {
> - gpc0: gpc0 {
> + gpc0: gpc0-gpio-bank {
> gpio-controller;
> #gpio-cells = <2>;
>
> @@ -442,7 +442,7 @@ gpc0: gpc0 {
> #interrupt-cells = <2>;
> };
>
> - gpc1: gpc1 {
> + gpc1: gpc1-gpio-bank {
> gpio-controller;
> #gpio-cells = <2>;
>
> @@ -450,7 +450,7 @@ gpc1: gpc1 {
> #interrupt-cells = <2>;
> };
>
> - gpg0: gpg0 {
> + gpg0: gpg0-gpio-bank {
> gpio-controller;
> #gpio-cells = <2>;
>
> @@ -458,7 +458,7 @@ gpg0: gpg0 {
> #interrupt-cells = <2>;
> };
>
> - gpg1: gpg1 {
> + gpg1: gpg1-gpio-bank {
> gpio-controller;
> #gpio-cells = <2>;
>
> @@ -466,7 +466,7 @@ gpg1: gpg1 {
> #interrupt-cells = <2>;
> };
>
> - gpg2: gpg2 {
> + gpg2: gpg2-gpio-bank {
> gpio-controller;
> #gpio-cells = <2>;
>
> @@ -474,7 +474,7 @@ gpg2: gpg2 {
> #interrupt-cells = <2>;
> };
>
> - gpg3: gpg3 {
> + gpg3: gpg3-gpio-bank {
> gpio-controller;
> #gpio-cells = <2>;
>
> @@ -482,14 +482,14 @@ gpg3: gpg3 {
> #interrupt-cells = <2>;
> };
>
> - gpp0: gpp0 {
> + gpp0: gpp0-gpio-bank {
> gpio-controller;
> #gpio-cells = <2>;
>
> interrupt-controller;
> #interrupt-cells = <2>;
> };
> - gpp1: gpp1 {
> + gpp1: gpp1-gpio-bank {
> gpio-controller;
> #gpio-cells = <2>;
>
> @@ -497,7 +497,7 @@ gpp1: gpp1 {
> #interrupt-cells = <2>;
> };
>
> - gpp2: gpp2 {
> + gpp2: gpp2-gpio-bank {
> gpio-controller;
> #gpio-cells = <2>;
>
> --
> 2.32.0
>
On Fri, 31 Dec 2021 at 18:20, Krzysztof Kozlowski
<[email protected]> wrote:
>
> The driver iterates over its devicetree children with
> for_each_child_of_node() and stores for later found node pointer. This
> has to be put in error paths to avoid leak during re-probing.
>
> Fixes: ab663789d697 ("pinctrl: samsung: Match pin banks with their device nodes")
> Cc: <[email protected]>
> Signed-off-by: Krzysztof Kozlowski <[email protected]>
> ---
> drivers/pinctrl/samsung/pinctrl-samsung.c | 29 +++++++++++++++++------
> 1 file changed, 22 insertions(+), 7 deletions(-)
>
> diff --git a/drivers/pinctrl/samsung/pinctrl-samsung.c b/drivers/pinctrl/samsung/pinctrl-samsung.c
> index 8941f658e7f1..f2864a7869b3 100644
> --- a/drivers/pinctrl/samsung/pinctrl-samsung.c
> +++ b/drivers/pinctrl/samsung/pinctrl-samsung.c
> @@ -1002,6 +1002,15 @@ samsung_pinctrl_get_soc_data_for_of_alias(struct platform_device *pdev)
> return &(of_data->ctrl[id]);
> }
>
> +static void samsung_banks_of_node_put(struct samsung_pinctrl_drv_data *d)
> +{
> + struct samsung_pin_bank *bank;
> + unsigned int i;
> +
> + for (i = 0; i < d->nr_banks; ++i, ++bank)
> + of_node_put(bank->of_node);
But "bank" variable wasn't actually assigned before, only declared?
> +}
> +
> /* retrieve the soc specific data */
> static const struct samsung_pin_ctrl *
> samsung_pinctrl_get_soc_data(struct samsung_pinctrl_drv_data *d,
> @@ -1116,19 +1125,19 @@ static int samsung_pinctrl_probe(struct platform_device *pdev)
> if (ctrl->retention_data) {
> drvdata->retention_ctrl = ctrl->retention_data->init(drvdata,
> ctrl->retention_data);
> - if (IS_ERR(drvdata->retention_ctrl))
> - return PTR_ERR(drvdata->retention_ctrl);
> + if (IS_ERR(drvdata->retention_ctrl)) {
> + ret = PTR_ERR(drvdata->retention_ctrl);
> + goto err_put_banks;
> + }
> }
>
> ret = samsung_pinctrl_register(pdev, drvdata);
> if (ret)
> - return ret;
> + goto err_put_banks;
>
> ret = samsung_gpiolib_register(pdev, drvdata);
> - if (ret) {
> - samsung_pinctrl_unregister(pdev, drvdata);
> - return ret;
> - }
> + if (ret)
> + goto err_unregister;
>
> if (ctrl->eint_gpio_init)
> ctrl->eint_gpio_init(drvdata);
> @@ -1138,6 +1147,12 @@ static int samsung_pinctrl_probe(struct platform_device *pdev)
> platform_set_drvdata(pdev, drvdata);
>
> return 0;
> +
> +err_unregister:
> + samsung_pinctrl_unregister(pdev, drvdata);
> +err_put_banks:
> + samsung_banks_of_node_put(drvdata);
> + return ret;
> }
>
> /*
> --
> 2.32.0
>
On Fri, 31 Dec 2021 at 18:20, Krzysztof Kozlowski
<[email protected]> wrote:
>
> Existing dt-bindings expected that each GPIO/pin bank within pin
> controller has its own node with name matching the bank (e.g. gpa0,
> gpx2) and "gpio-controller" property. The node name is then used for
> matching between driver data and DTS.
>
> Newly introduced dtschema expects to have nodes ending with "-gpio-bank"
> suffix, so rewrite bank-devicetree matching to look for old and new
> style of naming.
>
> Signed-off-by: Krzysztof Kozlowski <[email protected]>
> ---
> drivers/pinctrl/samsung/pinctrl-samsung.c | 57 ++++++++++++++++++-----
> 1 file changed, 45 insertions(+), 12 deletions(-)
>
> diff --git a/drivers/pinctrl/samsung/pinctrl-samsung.c b/drivers/pinctrl/samsung/pinctrl-samsung.c
> index f2864a7869b3..561853df8ef7 100644
> --- a/drivers/pinctrl/samsung/pinctrl-samsung.c
> +++ b/drivers/pinctrl/samsung/pinctrl-samsung.c
> @@ -1011,13 +1011,56 @@ static void samsung_banks_of_node_put(struct samsung_pinctrl_drv_data *d)
> of_node_put(bank->of_node);
> }
>
> +/*
> + * Iterate over all driver pin banks to find one matching the name of node,
> + * skipping optional "-gpio" node suffix. When found, assign node to the bank.
> + */
> +static void samsung_banks_of_node_get(struct device *dev,
> + struct samsung_pinctrl_drv_data *d,
> + struct device_node *node)
> +{
> + const char *suffix = "-gpio-bank";
> + struct samsung_pin_bank *bank;
> + struct device_node *child;
> + /* Pin bank names are up to 4 characters */
> + char node_name[20];
> + unsigned int i;
> + size_t len;
> +
> + bank = d->pin_banks;
> + for (i = 0; i < d->nr_banks; ++i, ++bank) {
> + strscpy(node_name, bank->name, sizeof(node_name));
> + len = strlcat(node_name, suffix, sizeof(node_name));
> + if (len == sizeof(sizeof(node_name))) {
Double sizeof is probably wrong?
> + dev_err(dev, "Too long pin bank name '%s', ignoring\n",
> + bank->name);
> + continue;
> + }
> +
> + for_each_child_of_node(node, child) {
> + if (!of_find_property(child, "gpio-controller", NULL))
> + continue;
> + if (of_node_name_eq(child, node_name))
> + break;
> + else if (of_node_name_eq(child, bank->name))
> + break;
> + }
> +
> + if (child)
> + bank->of_node = child;
> + else
> + dev_warn(dev, "Missing node for bank %s - invalid DTB\n",
> + bank->name);
> + /* child reference dropped in samsung_drop_banks_of_node() */
> + }
> +}
> +
> /* retrieve the soc specific data */
> static const struct samsung_pin_ctrl *
> samsung_pinctrl_get_soc_data(struct samsung_pinctrl_drv_data *d,
> struct platform_device *pdev)
> {
> struct device_node *node = pdev->dev.of_node;
> - struct device_node *np;
> const struct samsung_pin_bank_data *bdata;
> const struct samsung_pin_ctrl *ctrl;
> struct samsung_pin_bank *bank;
> @@ -1081,17 +1124,7 @@ samsung_pinctrl_get_soc_data(struct samsung_pinctrl_drv_data *d,
> */
> d->virt_base = virt_base[0];
>
> - for_each_child_of_node(node, np) {
> - if (!of_find_property(np, "gpio-controller", NULL))
> - continue;
> - bank = d->pin_banks;
> - for (i = 0; i < d->nr_banks; ++i, ++bank) {
> - if (of_node_name_eq(np, bank->name)) {
> - bank->of_node = np;
> - break;
> - }
> - }
> - }
> + samsung_banks_of_node_get(&pdev->dev, d, node);
>
> d->pin_base = pin_base;
> pin_base += d->nr_pins;
> --
> 2.32.0
>
On Fri, 31 Dec 2021 at 18:23, Krzysztof Kozlowski
<[email protected]> wrote:
>
> Convert the Samsung SoC (S3C24xx, S3C64xx, S5Pv210, Exynos) pin
> controller bindings to DT schema format. Parts of description and DTS
> example was copied from existing sources, so keep the license as
> GPL-2.0-only.
>
> Signed-off-by: Krzysztof Kozlowski <[email protected]>
> ---
Reviewed-by: Sam Protsenko <[email protected]>
Kudos for doing that, converting and splitting. It's fascinating how
time consuming that bindings conversion work can be (at least for me,
hehe).
> .../pinctrl/samsung,pinctrl-gpio-bank.yaml | 52 +++
> .../pinctrl/samsung,pinctrl-pins-cfg.yaml | 81 ++++
> .../samsung,pinctrl-wakeup-interrupt.yaml | 76 ++++
> .../bindings/pinctrl/samsung,pinctrl.yaml | 381 +++++++++++++++++
> .../bindings/pinctrl/samsung-pinctrl.txt | 383 ------------------
> MAINTAINERS | 2 +-
> 6 files changed, 591 insertions(+), 384 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/pinctrl/samsung,pinctrl-gpio-bank.yaml
> create mode 100644 Documentation/devicetree/bindings/pinctrl/samsung,pinctrl-pins-cfg.yaml
> create mode 100644 Documentation/devicetree/bindings/pinctrl/samsung,pinctrl-wakeup-interrupt.yaml
> create mode 100644 Documentation/devicetree/bindings/pinctrl/samsung,pinctrl.yaml
> delete mode 100644 Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt
>
> diff --git a/Documentation/devicetree/bindings/pinctrl/samsung,pinctrl-gpio-bank.yaml b/Documentation/devicetree/bindings/pinctrl/samsung,pinctrl-gpio-bank.yaml
> new file mode 100644
> index 000000000000..f73348c54748
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/pinctrl/samsung,pinctrl-gpio-bank.yaml
> @@ -0,0 +1,52 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/pinctrl/samsung,pinctrl-gpio-bank.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Samsung S3C/S5P/Exynos SoC pin controller - gpio bank
> +
> +maintainers:
> + - Krzysztof Kozlowski <[email protected]>
> + - Sylwester Nawrocki <[email protected]>
> + - Tomasz Figa <[email protected]>
> +
> +description: |
> + This is a part of device tree bindings for Samsung S3C/S5P/Exynos SoC pin
> + controller.
> +
> + GPIO bank description for Samsung S3C/S5P/Exynos SoC pin controller.
> +
> + See also Documentation/devicetree/bindings/pinctrl/samsung,pinctrl.yaml for
> + additional information and example.
> +
> +properties:
> + '#gpio-cells':
> + const: 2
> +
> + gpio-controller: true
> +
> + '#interrupt-cells':
> + description:
> + For GPIO banks supporting external GPIO interrupts or external wake-up
> + interrupts.
> + const: 2
> +
> + interrupt-controller:
> + description:
> + For GPIO banks supporting external GPIO interrupts or external wake-up
> + interrupts.
> +
> + interrupts:
> + description:
> + For GPIO banks supporting direct external wake-up interrupts (without
> + multiplexing). Number of interrupts must match number of wake-up capable
> + pins of this bank.
> + minItems: 1
> + maxItems: 8
> +
> +required:
> + - '#gpio-cells'
> + - gpio-controller
> +
> +additionalProperties: false
> diff --git a/Documentation/devicetree/bindings/pinctrl/samsung,pinctrl-pins-cfg.yaml b/Documentation/devicetree/bindings/pinctrl/samsung,pinctrl-pins-cfg.yaml
> new file mode 100644
> index 000000000000..637f4c05b344
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/pinctrl/samsung,pinctrl-pins-cfg.yaml
> @@ -0,0 +1,81 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/pinctrl/samsung,pinctrl-pins-cfg.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Samsung S3C/S5P/Exynos SoC pin controller - pins configuration
> +
> +maintainers:
> + - Krzysztof Kozlowski <[email protected]>
> + - Sylwester Nawrocki <[email protected]>
> + - Tomasz Figa <[email protected]>
> +
> +description: |
> + This is a part of device tree bindings for Samsung S3C/S5P/Exynos SoC pin
> + controller.
> +
> + Pins configuration for Samsung S3C/S5P/Exynos SoC pin controller.
> +
> + See also Documentation/devicetree/bindings/pinctrl/samsung,pinctrl.yaml for
> + additional information and example.
> +
> + The values used for config properties should be derived from the hardware
> + manual and these values are programmed as-is into the pin pull up/down and
> + driver strength register of the pin-controller.
> + See also include/dt-bindings/pinctrl/samsung.h with useful constants.
> +
> +properties:
> + samsung,pins:
> + description: |
> + List of pins to configure. For initial and sleep states, the maximum
> + number is one pin. In other cases there is no upper limit.
> +
> + The pins should use lowercase names matching hardware manual, e.g. for
> + GPA0 bank: gpa0-0, gpa0-1, gpa0-2.
> + $ref: /schemas/types.yaml#/definitions/string-array
> +
> + samsung,pin-function:
> + description: |
> + The pin function selection that should be applied on the pins listed in the
> + child node is specified using the "samsung,pin-function" property. The value
> + of this property that should be applied to each of the pins listed in the
> + "samsung,pins" property should be picked from the hardware manual of the SoC
> + for the specified pin group. This property is optional in the child node if
> + no specific function selection is desired for the pins listed in the child
> + node. The value of this property is used as-is to program the pin-controller
> + function selector register of the pin-bank.
> + $ref: /schemas/types.yaml#/definitions/uint32
> + minimum: 0
> + maximum: 15
> +
> + samsung,pin-drv:
> + description: Drive strength configuration.
> + $ref: /schemas/types.yaml#/definitions/uint32
> + minimum: 0
> + maximum: 15
> +
> + samsung,pin-pud:
> + description: Pull up/down configuration.
> + $ref: /schemas/types.yaml#/definitions/uint32
> + enum: [0, 1, 2, 3]
> +
> + samsung,pin-val:
> + description: Initial value of pin output buffer.
> + $ref: /schemas/types.yaml#/definitions/uint32
> + enum: [0, 1]
> +
> + samsung,pin-con-pdn:
> + description: Function in power down mode.
> + $ref: /schemas/types.yaml#/definitions/uint32
> + enum: [0, 1, 2, 3]
> +
> + samsung,pin-pud-pdn:
> + description: Pull up/down configuration in power down mode.
> + $ref: /schemas/types.yaml#/definitions/uint32
> + enum: [0, 1, 2, 3]
> +
> +required:
> + - samsung,pins
> +
> +additionalProperties: false
> diff --git a/Documentation/devicetree/bindings/pinctrl/samsung,pinctrl-wakeup-interrupt.yaml b/Documentation/devicetree/bindings/pinctrl/samsung,pinctrl-wakeup-interrupt.yaml
> new file mode 100644
> index 000000000000..eac56a087643
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/pinctrl/samsung,pinctrl-wakeup-interrupt.yaml
> @@ -0,0 +1,76 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/pinctrl/samsung,pinctrl-wakeup-interrupt.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Samsung S3C/S5P/Exynos SoC pin controller - wakeup interrupt controller
> +
> +maintainers:
> + - Krzysztof Kozlowski <[email protected]>
> + - Sylwester Nawrocki <[email protected]>
> + - Tomasz Figa <[email protected]>
> +
> +description: |
> + This is a part of device tree bindings for Samsung S3C/S5P/Exynos SoC pin
> + controller.
> +
> + External wake-up interrupts for Samsung S3C/S5P/Exynos SoC pin controller.
> + Only one pin-controller device node can include external wakeup interrupts
> + child node (in other words, only one External wake-up interrupts
> + pin-controller is supported).
> +
> + See also Documentation/devicetree/bindings/pinctrl/samsung,pinctrl.yaml for
> + additional information and example.
> +
> +properties:
> + compatible:
> + enum:
> + - samsung,s3c2410-wakeup-eint
> + - samsung,s3c2412-wakeup-eint
> + - samsung,s3c64xx-wakeup-eint
> + - samsung,s5pv210-wakeup-eint
> + - samsung,exynos4210-wakeup-eint
> + - samsung,exynos7-wakeup-eint
> +
> + interrupts:
> + description:
> + Interrupt used by multiplexed external wake-up interrupts.
> + minItems: 1
> + maxItems: 6
> +
> +required:
> + - compatible
> + - interrupts
> +
> +allOf:
> + - if:
> + properties:
> + compatible:
> + contains:
> + enum:
> + - samsung,s3c2410-wakeup-eint
> + - samsung,s3c2412-wakeup-eint
> + then:
> + properties:
> + interrupts:
> + minItems: 6
> + maxItems: 6
> + else:
> + if:
> + properties:
> + compatible:
> + contains:
> + const: samsung,s3c64xx-wakeup-eint
> + then:
> + properties:
> + interrupts:
> + minItems: 4
> + maxItems: 4
> + else:
> + properties:
> + interrupts:
> + minItems: 1
> + maxItems: 1
> +
> +additionalProperties: false
> diff --git a/Documentation/devicetree/bindings/pinctrl/samsung,pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/samsung,pinctrl.yaml
> new file mode 100644
> index 000000000000..37cd03805cab
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/pinctrl/samsung,pinctrl.yaml
> @@ -0,0 +1,381 @@
> +# SPDX-License-Identifier: GPL-2.0-only
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/pinctrl/samsung,pinctrl.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Samsung S3C/S5P/Exynos SoC pin controller
> +
> +maintainers:
> + - Krzysztof Kozlowski <[email protected]>
> + - Sylwester Nawrocki <[email protected]>
> + - Tomasz Figa <[email protected]>
> +
> +description: |
> + This is a part of device tree bindings for Samsung S3C/S5P/Exynos SoC pin
> + controller.
> +
> + Pin group settings (like drive strength, pull up/down) are available as
> + macros in include/dt-bindings/pinctrl/samsung.h.
> +
> + All the pin controller nodes should be represented in the aliases node using
> + the following format 'pinctrl{n}' where n is a unique number for the alias.
> +
> +properties:
> + $nodename:
> + pattern: "^pinctrl(@.*)?"
> +
> + compatible:
> + enum:
> + - samsung,s3c2412-pinctrl
> + - samsung,s3c2416-pinctrl
> + - samsung,s3c2440-pinctrl
> + - samsung,s3c2450-pinctrl
> + - samsung,s3c64xx-pinctrl
> + - samsung,s5pv210-pinctrl
> + - samsung,exynos3250-pinctrl
> + - samsung,exynos4210-pinctrl
> + - samsung,exynos4x12-pinctrl
> + - samsung,exynos5250-pinctrl
> + - samsung,exynos5260-pinctrl
> + - samsung,exynos5410-pinctrl
> + - samsung,exynos5420-pinctrl
> + - samsung,exynos5433-pinctrl
> + - samsung,exynos7-pinctrl
> + - samsung,exynos7885-pinctrl
> + - samsung,exynos850-pinctrl
> + - samsung,exynosautov9-pinctrl
> +
> + interrupts:
> + description:
> + Required for GPIO banks supporting external GPIO interrupts.
> + maxItems: 1
> +
> + power-domains:
> + maxItems: 1
> +
> + reg:
> + description:
> + Second base address of the pin controller if the specific registers of
> + the pin controller are separated into the different base address.
> + Only certain banks of certain pin controller might need it.
> + minItems: 1
> + maxItems: 2
> +
> + wakeup-interrupt-controller:
> + $ref: samsung,pinctrl-wakeup-interrupt.yaml
> +
> +patternProperties:
> + "^[a-z]+[0-9]*-gpio-bank$":
> + description:
> + Pin banks of the controller are represented by child nodes of the
> + controller node. Bank name is taken from name of the node.
> + $ref: samsung,pinctrl-gpio-bank.yaml
> +
> + "^[a-z0-9-]+-pins$":
> + oneOf:
> + - $ref: samsung,pinctrl-pins-cfg.yaml
> + required:
> + - samsung,pins
> + - type: object
> + patternProperties:
> + "^[a-z0-9-]+-pins$":
> + $ref: samsung,pinctrl-pins-cfg.yaml
> +
> + additionalProperties: false
> +
> + "^(initial|sleep)-state$":
> + patternProperties:
> + "^(pin-[a-z0-9-]+|[a-z0-9-]+-pin)$":
> + $ref: samsung,pinctrl-pins-cfg.yaml
> +
> + properties:
> + samsung,pins:
> + description: See samsung,pinctrl-pins-cfg.yaml
> + $ref: /schemas/types.yaml#/definitions/string-array
> + maxItems: 1
> +
> + required:
> + - samsung,pins
> +
> + unevaluatedProperties: false
> +
> +required:
> + - compatible
> + - reg
> +
> +allOf:
> + - $ref: "pinctrl.yaml#"
> + - if:
> + properties:
> + compatible:
> + contains:
> + const: samsung,exynos5433-pinctrl
> + then:
> + properties:
> + reg:
> + minItems: 1
> + maxItems: 2
> + else:
> + properties:
> + reg:
> + minItems: 1
> + maxItems: 1
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + #include <dt-bindings/pinctrl/samsung.h>
> +
> + pinctrl@7f008000 {
> + compatible = "samsung,s3c64xx-pinctrl";
> + reg = <0x7f008000 0x1000>;
> + interrupt-parent = <&vic1>;
> + interrupts = <21>;
> +
> + wakeup-interrupt-controller {
> + compatible = "samsung,s3c64xx-wakeup-eint";
> + interrupts-extended = <&vic0 0>,
> + <&vic0 1>,
> + <&vic1 0>,
> + <&vic1 1>;
> + };
> +
> + /* Pin bank with external GPIO or muxed external wake-up interrupts */
> + gpa-gpio-bank {
> + gpio-controller;
> + #gpio-cells = <2>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + // ...
> +
> + uart0-data-pins {
> + samsung,pins = "gpa-0", "gpa-1";
> + samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
> + samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
> + };
> +
> + // ...
> + };
> +
> + - |
> + #include <dt-bindings/interrupt-controller/arm-gic.h>
> + #include <dt-bindings/pinctrl/samsung.h>
> +
> + pinctrl@11400000 {
> + compatible = "samsung,exynos4210-pinctrl";
> + reg = <0x11400000 0x1000>;
> + interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
> +
> + pinctrl-names = "default";
> + pinctrl-0 = <&sleep0>;
> +
> + /* Pin bank with external GPIO or muxed external wake-up interrupts */
> + gpa0-gpio-bank {
> + gpio-controller;
> + #gpio-cells = <2>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + // ...
> +
> + uart0-data-pins {
> + samsung,pins = "gpa0-0", "gpa0-1";
> + samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
> + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
> + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
> + };
> +
> + // ...
> +
> + sleep0: sleep-state {
> + gpa0-0-pin {
> + samsung,pins = "gpa0-0";
> + samsung,pin-con-pdn = <EXYNOS_PIN_PDN_INPUT>;
> + samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_NONE>;
> + };
> +
> + gpa0-1-pin {
> + samsung,pins = "gpa0-1";
> + samsung,pin-con-pdn = <EXYNOS_PIN_PDN_OUT0>;
> + samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_NONE>;
> + };
> +
> + // ...
> + };
> + };
> +
> + - |
> + #include <dt-bindings/interrupt-controller/arm-gic.h>
> + #include <dt-bindings/pinctrl/samsung.h>
> +
> + pinctrl@11000000 {
> + compatible = "samsung,exynos4210-pinctrl";
> + reg = <0x11000000 0x1000>;
> + interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
> +
> + wakeup-interrupt-controller {
> + compatible = "samsung,exynos4210-wakeup-eint";
> + interrupt-parent = <&gic>;
> + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
> + };
> +
> + /* Pin bank with external GPIO or muxed external wake-up interrupts */
> + gpj0-gpio-bank {
> + gpio-controller;
> + #gpio-cells = <2>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + /* Pin bank without external interrupts */
> + gpy0-gpio-bank {
> + gpio-controller;
> + #gpio-cells = <2>;
> + };
> +
> + /* Pin bank with external direct wake-up interrupts */
> + gpx0-gpio-bank {
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + interrupt-controller;
> + interrupt-parent = <&gic>;
> + interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
> + #interrupt-cells = <2>;
> + };
> +
> + // ...
> +
> + sd0-clk-pins {
> + samsung,pins = "gpk0-0";
> + samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
> + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
> + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
> + };
> +
> + sd4-bus-width8-pins {
> + part-1-pins {
> + samsung,pins = "gpk0-3", "gpk0-4",
> + "gpk0-5", "gpk0-6";
> + samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
> + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
> + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
> + };
> +
> + part-2-pins {
> + samsung,pins = "gpk1-3", "gpk1-4",
> + "gpk1-5", "gpk1-6";
> + samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
> + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
> + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
> + };
> + };
> +
> + // ...
> +
> + otg-gp-pins {
> + samsung,pins = "gpx3-3";
> + samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
> + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
> + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
> + samsung,pin-val = <0>;
> + };
> + };
> +
> + - |
> + #include <dt-bindings/interrupt-controller/arm-gic.h>
> + #include <dt-bindings/pinctrl/samsung.h>
> +
> + pinctrl@10580000 {
> + compatible = "samsung,exynos5433-pinctrl";
> + reg = <0x10580000 0x1a20>, <0x11090000 0x100>;
> +
> + pinctrl-names = "default";
> + pinctrl-0 = <&initial_alive>;
> +
> + wakeup-interrupt-controller {
> + compatible = "samsung,exynos7-wakeup-eint";
> + interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
> + };
> +
> + /* Pin bank with external direct wake-up interrupts */
> + gpa0-gpio-bank {
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + interrupt-controller;
> + interrupt-parent = <&gic>;
> + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
> + #interrupt-cells = <2>;
> + };
> +
> + // ...
> +
> + te-irq-pins {
> + samsung,pins = "gpf1-3";
> + samsung,pin-function = <0xf>;
> + };
> +
> + // ..
> +
> + initial_alive: initial-state {
> + gpa0-0-pin {
> + samsung,pins = "gpa0-0";
> + samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
> + samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
> + samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
> + };
> +
> + // ...
> + };
> + };
> +
> + - |
> + #include <dt-bindings/interrupt-controller/arm-gic.h>
> + #include <dt-bindings/pinctrl/samsung.h>
> +
> + pinctrl@114b0000 {
> + compatible = "samsung,exynos5433-pinctrl";
> + reg = <0x114b0000 0x1000>;
> + interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
> + power-domains = <&pd_aud>;
> +
> + /* Pin bank with external GPIO or muxed external wake-up interrupts */
> + gpz0-gpio-bank {
> + gpio-controller;
> + #gpio-cells = <2>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + // ...
> +
> + i2s0-bus-pins {
> + samsung,pins = "gpz0-0", "gpz0-1", "gpz0-2", "gpz0-3",
> + "gpz0-4", "gpz0-5", "gpz0-6";
> + samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
> + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
> + samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
> + };
> +
> + // ...
> + };
> diff --git a/Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt
> deleted file mode 100644
> index 9e70edceb21b..000000000000
> --- a/Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt
> +++ /dev/null
> @@ -1,383 +0,0 @@
> -Samsung GPIO and Pin Mux/Config controller
> -
> -Samsung's ARM based SoC's integrates a GPIO and Pin mux/config hardware
> -controller. It controls the input/output settings on the available pads/pins
> -and also provides ability to multiplex and configure the output of various
> -on-chip controllers onto these pads.
> -
> -Required Properties:
> -- compatible: should be one of the following.
> - - "samsung,s3c2412-pinctrl": for S3C2412-compatible pin-controller,
> - - "samsung,s3c2416-pinctrl": for S3C2416-compatible pin-controller,
> - - "samsung,s3c2440-pinctrl": for S3C2440-compatible pin-controller,
> - - "samsung,s3c2450-pinctrl": for S3C2450-compatible pin-controller,
> - - "samsung,s3c64xx-pinctrl": for S3C64xx-compatible pin-controller,
> - - "samsung,s5pv210-pinctrl": for S5PV210-compatible pin-controller,
> - - "samsung,exynos3250-pinctrl": for Exynos3250 compatible pin-controller.
> - - "samsung,exynos4210-pinctrl": for Exynos4210 compatible pin-controller.
> - - "samsung,exynos4x12-pinctrl": for Exynos4x12 compatible pin-controller.
> - - "samsung,exynos5250-pinctrl": for Exynos5250 compatible pin-controller.
> - - "samsung,exynos5260-pinctrl": for Exynos5260 compatible pin-controller.
> - - "samsung,exynos5410-pinctrl": for Exynos5410 compatible pin-controller.
> - - "samsung,exynos5420-pinctrl": for Exynos5420 compatible pin-controller.
> - - "samsung,exynos5433-pinctrl": for Exynos5433 compatible pin-controller.
> - - "samsung,exynos7-pinctrl": for Exynos7 compatible pin-controller.
> - - "samsung,exynos7885-pinctrl": for Exynos7885 compatible pin-controller.
> - - "samsung,exynos850-pinctrl": for Exynos850 compatible pin-controller.
> - - "samsung,exynosautov9-pinctrl": for ExynosAutov9 compatible pin-controller.
> -
> -- reg: Base address of the pin controller hardware module and length of
> - the address space it occupies.
> -
> - - reg: Second base address of the pin controller if the specific registers
> - of the pin controller are separated into the different base address.
> -
> - Eg: GPF[1-5] of Exynos5433 are separated into the two base address.
> - - First base address is for GPAx and GPF[1-5] external interrupt
> - registers.
> - - Second base address is for GPF[1-5] pinctrl registers.
> -
> - pinctrl_0: pinctrl@10580000 {
> - compatible = "samsung,exynos5433-pinctrl";
> - reg = <0x10580000 0x1a20>, <0x11090000 0x100>;
> -
> - wakeup-interrupt-controller {
> - compatible = "samsung,exynos7-wakeup-eint";
> - interrupts = <0 16 0>;
> - };
> - };
> -
> -- Pin banks as child nodes: Pin banks of the controller are represented by child
> - nodes of the controller node. Bank name is taken from name of the node. Each
> - bank node must contain following properties:
> -
> - - gpio-controller: identifies the node as a gpio controller and pin bank.
> - - #gpio-cells: number of cells in GPIO specifier. Since the generic GPIO
> - binding is used, the amount of cells must be specified as 2. See the below
> - mentioned gpio binding representation for description of particular cells.
> -
> - Eg: <&gpx2 6 0>
> - <[phandle of the gpio controller node]
> - [pin number within the gpio controller]
> - [flags]>
> -
> - Values for gpio specifier:
> - - Pin number: is a value between 0 to 7.
> - - Flags: 0 - Active High
> - 1 - Active Low
> -
> -- Pin mux/config groups as child nodes: The pin mux (selecting pin function
> - mode) and pin config (pull up/down, driver strength) settings are represented
> - as child nodes of the pin-controller node. There should be at least one
> - child node and there is no limit on the count of these child nodes. It is
> - also possible for a child node to consist of several further child nodes
> - to allow grouping multiple pinctrl groups into one. The format of second
> - level child nodes is exactly the same as for first level ones and is
> - described below.
> -
> - The child node should contain a list of pin(s) on which a particular pin
> - function selection or pin configuration (or both) have to applied. This
> - list of pins is specified using the property name "samsung,pins". There
> - should be at least one pin specified for this property and there is no upper
> - limit on the count of pins that can be specified. The pins are specified
> - using pin names which are derived from the hardware manual of the SoC. As
> - an example, the pins in GPA0 bank of the pin controller can be represented
> - as "gpa0-0", "gpa0-1", "gpa0-2" and so on. The names should be in lower case.
> - The format of the pin names should be (as per the hardware manual)
> - "[pin bank name]-[pin number within the bank]".
> -
> - The pin function selection that should be applied on the pins listed in the
> - child node is specified using the "samsung,pin-function" property. The value
> - of this property that should be applied to each of the pins listed in the
> - "samsung,pins" property should be picked from the hardware manual of the SoC
> - for the specified pin group. This property is optional in the child node if
> - no specific function selection is desired for the pins listed in the child
> - node. The value of this property is used as-is to program the pin-controller
> - function selector register of the pin-bank.
> -
> - The child node can also optionally specify one or more of the pin
> - configuration that should be applied on all the pins listed in the
> - "samsung,pins" property of the child node. The following pin configuration
> - properties are supported.
> -
> - - samsung,pin-val: Initial value of pin output buffer.
> - - samsung,pin-pud: Pull up/down configuration.
> - - samsung,pin-drv: Drive strength configuration.
> - - samsung,pin-pud-pdn: Pull up/down configuration in power down mode.
> - - samsung,pin-drv-pdn: Drive strength configuration in power down mode.
> -
> - The values specified by these config properties should be derived from the
> - hardware manual and these values are programmed as-is into the pin
> - pull up/down and driver strength register of the pin-controller.
> -
> - Note: A child should include at least a pin function selection property or
> - pin configuration property (one or more) or both.
> -
> - The client nodes that require a particular pin function selection and/or
> - pin configuration should use the bindings listed in the "pinctrl-bindings.txt"
> - file.
> -
> -External GPIO and Wakeup Interrupts:
> -
> -The controller supports two types of external interrupts over gpio. The first
> -is the external gpio interrupt and second is the external wakeup interrupts.
> -The difference between the two is that the external wakeup interrupts can be
> -used as system wakeup events.
> -
> -A. External GPIO Interrupts: For supporting external gpio interrupts, the
> - following properties should be specified in the pin-controller device node.
> -
> - - interrupts: interrupt specifier for the controller. The format and value of
> - the interrupt specifier depends on the interrupt parent for the controller.
> -
> - In addition, following properties must be present in node of every bank
> - of pins supporting GPIO interrupts:
> -
> - - interrupt-controller: identifies the controller node as interrupt-parent.
> - - #interrupt-cells: the value of this property should be 2.
> - - First Cell: represents the external gpio interrupt number local to the
> - external gpio interrupt space of the controller.
> - - Second Cell: flags to identify the type of the interrupt
> - - 1 = rising edge triggered
> - - 2 = falling edge triggered
> - - 3 = rising and falling edge triggered
> - - 4 = high level triggered
> - - 8 = low level triggered
> -
> -B. External Wakeup Interrupts: For supporting external wakeup interrupts, a
> - child node representing the external wakeup interrupt controller should be
> - included in the pin-controller device node.
> -
> - Only one pin-controller device node can include external wakeup interrupts
> - child node (in other words, only one External Wakeup Interrupts
> - pin-controller is supported).
> -
> - This child node should include following properties:
> -
> - - compatible: identifies the type of the external wakeup interrupt controller
> - The possible values are:
> - - samsung,s3c2410-wakeup-eint: represents wakeup interrupt controller
> - found on Samsung S3C24xx SoCs except S3C2412 and S3C2413,
> - - samsung,s3c2412-wakeup-eint: represents wakeup interrupt controller
> - found on Samsung S3C2412 and S3C2413 SoCs,
> - - samsung,s3c64xx-wakeup-eint: represents wakeup interrupt controller
> - found on Samsung S3C64xx SoCs,
> - - samsung,s5pv210-wakeup-eint: represents wakeup interrupt controller
> - found on Samsung S5Pv210 SoCs,
> - - samsung,exynos4210-wakeup-eint: represents wakeup interrupt controller
> - found on Samsung Exynos4210 and S5PC110/S5PV210 SoCs.
> - - samsung,exynos7-wakeup-eint: represents wakeup interrupt controller
> - found on Samsung Exynos7 SoC.
> - - interrupts: interrupt used by multiplexed wakeup interrupts.
> -
> - In addition, following properties must be present in node of every bank
> - of pins supporting wake-up interrupts:
> -
> - - interrupt-controller: identifies the node as interrupt-parent.
> - - #interrupt-cells: the value of this property should be 2
> - - First Cell: represents the external wakeup interrupt number local to
> - the external wakeup interrupt space of the controller.
> - - Second Cell: flags to identify the type of the interrupt
> - - 1 = rising edge triggered
> - - 2 = falling edge triggered
> - - 3 = rising and falling edge triggered
> - - 4 = high level triggered
> - - 8 = low level triggered
> -
> - Node of every bank of pins supporting direct wake-up interrupts (without
> - multiplexing) must contain following properties:
> -
> - - interrupts: interrupts of the interrupt parent which are used for external
> - wakeup interrupts from pins of the bank, must contain interrupts for all
> - pins of the bank.
> -
> -Aliases:
> -
> -All the pin controller nodes should be represented in the aliases node using
> -the following format 'pinctrl{n}' where n is a unique number for the alias.
> -
> -Aliases for controllers compatible with "samsung,exynos7-pinctrl":
> -- pinctrl0: pin controller of ALIVE block,
> -- pinctrl1: pin controller of BUS0 block,
> -- pinctrl2: pin controller of NFC block,
> -- pinctrl3: pin controller of TOUCH block,
> -- pinctrl4: pin controller of FF block,
> -- pinctrl5: pin controller of ESE block,
> -- pinctrl6: pin controller of FSYS0 block,
> -- pinctrl7: pin controller of FSYS1 block,
> -- pinctrl8: pin controller of BUS1 block,
> -- pinctrl9: pin controller of AUDIO block,
> -
> -Example: A pin-controller node with pin banks:
> -
> - pinctrl_0: pinctrl@11400000 {
> - compatible = "samsung,exynos4210-pinctrl";
> - reg = <0x11400000 0x1000>;
> - interrupts = <0 47 0>;
> -
> - /* ... */
> -
> - /* Pin bank without external interrupts */
> - gpy0: gpy0 {
> - gpio-controller;
> - #gpio-cells = <2>;
> - };
> -
> - /* ... */
> -
> - /* Pin bank with external GPIO or muxed wake-up interrupts */
> - gpj0: gpj0 {
> - gpio-controller;
> - #gpio-cells = <2>;
> -
> - interrupt-controller;
> - #interrupt-cells = <2>;
> - };
> -
> - /* ... */
> -
> - /* Pin bank with external direct wake-up interrupts */
> - gpx0: gpx0 {
> - gpio-controller;
> - #gpio-cells = <2>;
> -
> - interrupt-controller;
> - interrupt-parent = <&gic>;
> - interrupts = <0 16 0>, <0 17 0>, <0 18 0>, <0 19 0>,
> - <0 20 0>, <0 21 0>, <0 22 0>, <0 23 0>;
> - #interrupt-cells = <2>;
> - };
> -
> - /* ... */
> - };
> -
> -Example 1: A pin-controller node with pin groups.
> -
> - #include <dt-bindings/pinctrl/samsung.h>
> -
> - pinctrl_0: pinctrl@11400000 {
> - compatible = "samsung,exynos4210-pinctrl";
> - reg = <0x11400000 0x1000>;
> - interrupts = <0 47 0>;
> -
> - /* ... */
> -
> - uart0_data: uart0-data {
> - samsung,pins = "gpa0-0", "gpa0-1";
> - samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
> - samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
> - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
> - };
> -
> - uart0_fctl: uart0-fctl {
> - samsung,pins = "gpa0-2", "gpa0-3";
> - samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
> - samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
> - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
> - };
> -
> - uart1_data: uart1-data {
> - samsung,pins = "gpa0-4", "gpa0-5";
> - samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
> - samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
> - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
> - };
> -
> - uart1_fctl: uart1-fctl {
> - samsung,pins = "gpa0-6", "gpa0-7";
> - samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
> - samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
> - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
> - };
> -
> - i2c2_bus: i2c2-bus {
> - samsung,pins = "gpa0-6", "gpa0-7";
> - samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
> - samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
> - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
> - };
> -
> - sd4_bus8: sd4-bus-width8 {
> - part-1 {
> - samsung,pins = "gpk0-3", "gpk0-4",
> - "gpk0-5", "gpk0-6";
> - samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
> - samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
> - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
> - };
> - part-2 {
> - samsung,pins = "gpk1-3", "gpk1-4",
> - "gpk1-5", "gpk1-6";
> - samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
> - samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
> - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
> - };
> - };
> - };
> -
> -Example 2: A pin-controller node with external wakeup interrupt controller node.
> -
> - pinctrl_1: pinctrl@11000000 {
> - compatible = "samsung,exynos4210-pinctrl";
> - reg = <0x11000000 0x1000>;
> - interrupts = <0 46 0>
> -
> - /* ... */
> -
> - wakeup-interrupt-controller {
> - compatible = "samsung,exynos4210-wakeup-eint";
> - interrupt-parent = <&gic>;
> - interrupts = <0 32 0>;
> - };
> - };
> -
> -Example 3: A uart client node that supports 'default' and 'flow-control' states.
> -
> - uart@13800000 {
> - compatible = "samsung,exynos4210-uart";
> - reg = <0x13800000 0x100>;
> - interrupts = <0 52 0>;
> - pinctrl-names = "default", "flow-control;
> - pinctrl-0 = <&uart0_data>;
> - pinctrl-1 = <&uart0_data>, <&uart0_fctl>;
> - };
> -
> -Example 4: Set up the default pin state for uart controller.
> -
> - static int s3c24xx_serial_probe(struct platform_device *pdev) {
> - struct pinctrl *pinctrl;
> -
> - /* ... */
> -
> - pinctrl = devm_pinctrl_get_select_default(&pdev->dev);
> - }
> -
> -Example 5: A display port client node that supports 'default' pinctrl state
> - and gpio binding.
> -
> - display-port-controller {
> - /* ... */
> -
> - samsung,hpd-gpio = <&gpx2 6 0>;
> - pinctrl-names = "default";
> - pinctrl-0 = <&dp_hpd>;
> - };
> -
> -Example 6: Request the gpio for display port controller
> -
> - static int exynos_dp_probe(struct platform_device *pdev)
> - {
> - int hpd_gpio, ret;
> - struct device *dev = &pdev->dev;
> - struct device_node *dp_node = dev->of_node;
> -
> - /* ... */
> -
> - hpd_gpio = of_get_named_gpio(dp_node, "samsung,hpd-gpio", 0);
> -
> - /* ... */
> -
> - ret = devm_gpio_request_one(&pdev->dev, hpd_gpio, GPIOF_IN,
> - "hpd_gpio");
> - /* ... */
> - }
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 5ea5655a29c3..33005c10e956 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -15242,7 +15242,7 @@ L: [email protected]
> S: Maintained
> Q: https://patchwork.kernel.org/project/linux-samsung-soc/list/
> T: git git://git.kernel.org/pub/scm/linux/kernel/git/pinctrl/samsung.git
> -F: Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt
> +F: Documentation/devicetree/bindings/pinctrl/samsung,pinctrl*yaml
> F: drivers/pinctrl/samsung/
> F: include/dt-bindings/pinctrl/samsung.h
>
> --
> 2.32.0
>
On 03/01/2022 15:49, Sam Protsenko wrote:
> On Fri, 31 Dec 2021 at 18:20, Krzysztof Kozlowski
> <[email protected]> wrote:
>>
>> The driver iterates over its devicetree children with
>> for_each_child_of_node() and stores for later found node pointer. This
>> has to be put in error paths to avoid leak during re-probing.
>>
>> Fixes: ab663789d697 ("pinctrl: samsung: Match pin banks with their device nodes")
>> Cc: <[email protected]>
>> Signed-off-by: Krzysztof Kozlowski <[email protected]>
>> ---
>> drivers/pinctrl/samsung/pinctrl-samsung.c | 29 +++++++++++++++++------
>> 1 file changed, 22 insertions(+), 7 deletions(-)
>>
>> diff --git a/drivers/pinctrl/samsung/pinctrl-samsung.c b/drivers/pinctrl/samsung/pinctrl-samsung.c
>> index 8941f658e7f1..f2864a7869b3 100644
>> --- a/drivers/pinctrl/samsung/pinctrl-samsung.c
>> +++ b/drivers/pinctrl/samsung/pinctrl-samsung.c
>> @@ -1002,6 +1002,15 @@ samsung_pinctrl_get_soc_data_for_of_alias(struct platform_device *pdev)
>> return &(of_data->ctrl[id]);
>> }
>>
>> +static void samsung_banks_of_node_put(struct samsung_pinctrl_drv_data *d)
>> +{
>> + struct samsung_pin_bank *bank;
>> + unsigned int i;
>> +
>> + for (i = 0; i < d->nr_banks; ++i, ++bank)
>> + of_node_put(bank->of_node);
>
> But "bank" variable wasn't actually assigned before, only declared?
Good point, bank has to be assigned just like in patch 2/24.
>
>> +}
>> +
Best regards,
Krzysztof
On 03/01/2022 19:43, Sam Protsenko wrote:
> On Fri, 31 Dec 2021 at 18:20, Krzysztof Kozlowski
> <[email protected]> wrote:
>>
>> Existing dt-bindings expected that each GPIO/pin bank within pin
>> controller has its own node with name matching the bank (e.g. gpa0,
>> gpx2) and "gpio-controller" property. The node name is then used for
>> matching between driver data and DTS.
>>
>> Newly introduced dtschema expects to have nodes ending with "-gpio-bank"
>> suffix, so rewrite bank-devicetree matching to look for old and new
>> style of naming.
>>
>> Signed-off-by: Krzysztof Kozlowski <[email protected]>
>> ---
>> drivers/pinctrl/samsung/pinctrl-samsung.c | 57 ++++++++++++++++++-----
>> 1 file changed, 45 insertions(+), 12 deletions(-)
>>
>> diff --git a/drivers/pinctrl/samsung/pinctrl-samsung.c b/drivers/pinctrl/samsung/pinctrl-samsung.c
>> index f2864a7869b3..561853df8ef7 100644
>> --- a/drivers/pinctrl/samsung/pinctrl-samsung.c
>> +++ b/drivers/pinctrl/samsung/pinctrl-samsung.c
>> @@ -1011,13 +1011,56 @@ static void samsung_banks_of_node_put(struct samsung_pinctrl_drv_data *d)
>> of_node_put(bank->of_node);
>> }
>>
>> +/*
>> + * Iterate over all driver pin banks to find one matching the name of node,
>> + * skipping optional "-gpio" node suffix. When found, assign node to the bank.
>> + */
>> +static void samsung_banks_of_node_get(struct device *dev,
>> + struct samsung_pinctrl_drv_data *d,
>> + struct device_node *node)
>> +{
>> + const char *suffix = "-gpio-bank";
>> + struct samsung_pin_bank *bank;
>> + struct device_node *child;
>> + /* Pin bank names are up to 4 characters */
>> + char node_name[20];
>> + unsigned int i;
>> + size_t len;
>> +
>> + bank = d->pin_banks;
>> + for (i = 0; i < d->nr_banks; ++i, ++bank) {
>> + strscpy(node_name, bank->name, sizeof(node_name));
>> + len = strlcat(node_name, suffix, sizeof(node_name));
>> + if (len == sizeof(sizeof(node_name))) {
>
> Double sizeof is probably wrong?
Thanks, copy-paste error... it should be also "len >= sizeof".
Best regards,
Krzysztof
Hello Krzysztof
On Sat, Jan 1, 2022 at 10:42 AM Krzysztof Kozlowski
<[email protected]> wrote:
>
> The PIN_OUT/PIN_OUT_SET/PIN_CFG defines for pin controller pin
> configuration are not used.
>
> Signed-off-by: Krzysztof Kozlowski <[email protected]>
> ---
Thanks!
Reviewed-by: Alim Akhtar <[email protected]>
> arch/arm/boot/dts/exynos3250-pinctrl.dtsi | 25 -----------------------
> 1 file changed, 25 deletions(-)
>
> diff --git a/arch/arm/boot/dts/exynos3250-pinctrl.dtsi b/arch/arm/boot/dts/exynos3250-pinctrl.dtsi
> index dff3c6e3aa1f..a616cb1aca29 100644
> --- a/arch/arm/boot/dts/exynos3250-pinctrl.dtsi
> +++ b/arch/arm/boot/dts/exynos3250-pinctrl.dtsi
> @@ -19,31 +19,6 @@ _pin { \
> samsung,pin-drv = <EXYNOS4_PIN_DRV_ ##_drv>; \
> }
>
> -#define PIN_OUT(_pin, _drv) \
> - _pin { \
> - samsung,pins = #_pin; \
> - samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; \
> - samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; \
> - samsung,pin-drv = <EXYNOS4_PIN_DRV_ ##_drv>; \
> - }
> -
> -#define PIN_OUT_SET(_pin, _val, _drv) \
> - _pin { \
> - samsung,pins = #_pin; \
> - samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; \
> - samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; \
> - samsung,pin-drv = <EXYNOS4_PIN_DRV_ ##_drv>; \
> - samsung,pin-val = <_val>; \
> - }
> -
> -#define PIN_CFG(_pin, _sel, _pull, _drv) \
> - _pin { \
> - samsung,pins = #_pin; \
> - samsung,pin-function = <_sel>; \
> - samsung,pin-pud = <EXYNOS_PIN_PULL_ ##_pull>; \
> - samsung,pin-drv = <EXYNOS4_PIN_DRV_ ##_drv>; \
> - }
> -
> #define PIN_SLP(_pin, _mode, _pull) \
> _pin { \
> samsung,pins = #_pin; \
> --
> 2.32.0
>
--
Regards,
Alim
Hi Krzysztof
On Sat, Jan 1, 2022 at 11:15 AM Krzysztof Kozlowski
<[email protected]> wrote:
>
> Using node paths to extend or override a device tree node is error
> prone. If there was a typo error, a new node will be created instead of
> extending the existing node. This will lead to run-time errors that
> could be hard to detect.
>
> A mistyped label on the other hand, will cause a dtc compile error
> (during build time).
>
While it makes sense to do this, was wondering if you faced any issue
with the current implementation?
> Signed-off-by: Krzysztof Kozlowski <[email protected]>
> ---
Feel free to add
Reviewed-by: Alim Akhtar <[email protected]>
> arch/arm/boot/dts/exynos5420-peach-pit.dts | 44 +++++++++++-----------
> 1 file changed, 22 insertions(+), 22 deletions(-)
>
> diff --git a/arch/arm/boot/dts/exynos5420-peach-pit.dts b/arch/arm/boot/dts/exynos5420-peach-pit.dts
> index e76fb104db19..1ae5528e9ebf 100644
> --- a/arch/arm/boot/dts/exynos5420-peach-pit.dts
> +++ b/arch/arm/boot/dts/exynos5420-peach-pit.dts
> @@ -868,27 +868,26 @@ pmic_dvs_1: pmic-dvs-1 {
> };
> };
>
> -&pinctrl_1 {
> - /* Adjust WiFi drive strengths lower for EMI */
> - sd1_clk: sd1-clk {
> - samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
> - };
> +/* pinctrl_1 */
> +/* Adjust WiFi drive strengths lower for EMI */
> +&sd1_bus1 {
> + samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
> +};
>
> - sd1_cmd: sd1-cmd {
> - samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
> - };
> +&sd1_bus4 {
> + samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
> +};
>
> - sd1_bus1: sd1-bus-width1 {
> - samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
> - };
> +&sd1_bus8 {
> + samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
> +};
>
> - sd1_bus4: sd1-bus-width4 {
> - samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
> - };
> +&sd1_clk {
> + samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
> +};
>
> - sd1_bus8: sd1-bus-width8 {
> - samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
> - };
> +&sd1_cmd {
> + samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
> };
>
> &pinctrl_2 {
> @@ -907,12 +906,13 @@ pmic_dvs_3: pmic-dvs-3 {
> };
> };
>
> -&pinctrl_3 {
> - /* Drive SPI lines at x2 for better integrity */
> - spi2-bus {
> - samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
> - };
> +/* pinctrl_3*/
> +/* Drive SPI lines at x2 for better integrity */
> +&spi2_bus {
> + samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
> +};
>
> +&pinctrl_3 {
> /* Drive SPI chip select at x2 for better integrity */
> ec_spi_cs: ec-spi-cs {
> samsung,pins = "gpb1-2";
> --
> 2.32.0
>
--
Regards,
Alim
Hi Krzysztof,
On Sat, Jan 1, 2022 at 1:15 PM Krzysztof Kozlowski
<[email protected]> wrote:
>
> Using node paths to extend or override a device tree node is error
> prone. If there was a typo error, a new node will be created instead of
> extending the existing node. This will lead to run-time errors that
> could be hard to detect.
>
> A mistyped label on the other hand, will cause a dtc compile error
> (during build time).
>
> Signed-off-by: Krzysztof Kozlowski <[email protected]>
> ---
Reviewed-by: Alim Akhtar <[email protected]>
> arch/arm/boot/dts/exynos5800-peach-pi.dts | 33 +++++++++++------------
> 1 file changed, 16 insertions(+), 17 deletions(-)
>
> diff --git a/arch/arm/boot/dts/exynos5800-peach-pi.dts b/arch/arm/boot/dts/exynos5800-peach-pi.dts
> index 77013ee586f8..6bf3fd37fb2b 100644
> --- a/arch/arm/boot/dts/exynos5800-peach-pi.dts
> +++ b/arch/arm/boot/dts/exynos5800-peach-pi.dts
> @@ -850,27 +850,26 @@ pmic_dvs_1: pmic-dvs-1 {
> };
> };
>
> -&pinctrl_1 {
> - /* Adjust WiFi drive strengths lower for EMI */
> - sd1_clk: sd1-clk {
> - samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
> - };
> +/* pinctrl_1 */
> +/* Adjust WiFi drive strengths lower for EMI */
> +&sd1_bus1 {
> + samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
> +};
>
> - sd1_cmd: sd1-cmd {
> - samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
> - };
> +&sd1_bus4 {
> + samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
> +};
>
> - sd1_bus1: sd1-bus-width1 {
> - samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
> - };
> +&sd1_bus8 {
> + samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
> +};
>
> - sd1_bus4: sd1-bus-width4 {
> - samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
> - };
> +&sd1_clk {
> + samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
> +};
>
> - sd1_bus8: sd1-bus-width8 {
> - samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
> - };
> +&sd1_cmd {
> + samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
> };
>
> &pinctrl_2 {
> --
> 2.32.0
>
--
Regards,
Alim
Hi Krzysztof,
On Sat, Jan 1, 2022 at 1:15 PM Krzysztof Kozlowski
<[email protected]> wrote:
>
> The pin configuration for PMIC DVS (pmic-dvs-2 and pmic-dvs-3) are
> exactly the same, so merge them.
>
> Signed-off-by: Krzysztof Kozlowski <[email protected]>
> ---
> arch/arm/boot/dts/exynos5800-peach-pi.dts | 20 +++++++-------------
> 1 file changed, 7 insertions(+), 13 deletions(-)
>
> diff --git a/arch/arm/boot/dts/exynos5800-peach-pi.dts b/arch/arm/boot/dts/exynos5800-peach-pi.dts
> index 6bf3fd37fb2b..eca805b83816 100644
> --- a/arch/arm/boot/dts/exynos5800-peach-pi.dts
> +++ b/arch/arm/boot/dts/exynos5800-peach-pi.dts
> @@ -221,7 +221,7 @@ max77802: pmic@9 {
> interrupts = <1 IRQ_TYPE_NONE>;
> pinctrl-names = "default";
> pinctrl-0 = <&max77802_irq>, <&pmic_selb>,
> - <&pmic_dvs_1>, <&pmic_dvs_2>, <&pmic_dvs_3>;
> + <&pmic_dvs_1>, <&pmic_dvs_2>;
> wakeup-source;
> reg = <0x9>;
> #clock-cells = <1>;
> @@ -874,26 +874,20 @@ &sd1_cmd {
>
> &pinctrl_2 {
> pmic_dvs_2: pmic-dvs-2 {
> - samsung,pins = "gpj4-2";
> + samsung,pins = "gpj4-2", "gpj4-3";
> samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
> samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
> samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
> };
> +};
>
> - pmic_dvs_3: pmic-dvs-3 {
> - samsung,pins = "gpj4-3";
> - samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
> - samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
> - samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
> - };
> +/* pinctrl_3*/
> +/* Drive SPI lines at x2 for better integrity */
> +&spi2_bus {
> + samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
> };
>
Maybe move this spi2_bus part to patch #07 as the commit does not
mention this change.
> &pinctrl_3 {
> - /* Drive SPI lines at x2 for better integrity */
> - spi2-bus {
> - samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
> - };
> -
> /* Drive SPI chip select at x2 for better integrity */
> ec_spi_cs: ec-spi-cs {
> samsung,pins = "gpb1-2";
> --
> 2.32.0
>
--
Regards,
Alim
On 06/01/2022 19:47, Alim Akhtar wrote:
> Hi Krzysztof,
>
> On Sat, Jan 1, 2022 at 1:15 PM Krzysztof Kozlowski
> <[email protected]> wrote:
>>
>> The pin configuration for PMIC DVS (pmic-dvs-2 and pmic-dvs-3) are
>> exactly the same, so merge them.
>>
>> Signed-off-by: Krzysztof Kozlowski <[email protected]>
>> ---
>> arch/arm/boot/dts/exynos5800-peach-pi.dts | 20 +++++++-------------
>> 1 file changed, 7 insertions(+), 13 deletions(-)
>>
>> diff --git a/arch/arm/boot/dts/exynos5800-peach-pi.dts b/arch/arm/boot/dts/exynos5800-peach-pi.dts
>> index 6bf3fd37fb2b..eca805b83816 100644
>> --- a/arch/arm/boot/dts/exynos5800-peach-pi.dts
>> +++ b/arch/arm/boot/dts/exynos5800-peach-pi.dts
>> @@ -221,7 +221,7 @@ max77802: pmic@9 {
>> interrupts = <1 IRQ_TYPE_NONE>;
>> pinctrl-names = "default";
>> pinctrl-0 = <&max77802_irq>, <&pmic_selb>,
>> - <&pmic_dvs_1>, <&pmic_dvs_2>, <&pmic_dvs_3>;
>> + <&pmic_dvs_1>, <&pmic_dvs_2>;
>> wakeup-source;
>> reg = <0x9>;
>> #clock-cells = <1>;
>> @@ -874,26 +874,20 @@ &sd1_cmd {
>>
>> &pinctrl_2 {
>> pmic_dvs_2: pmic-dvs-2 {
>> - samsung,pins = "gpj4-2";
>> + samsung,pins = "gpj4-2", "gpj4-3";
>> samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
>> samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
>> samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
>> };
>> +};
>>
>> - pmic_dvs_3: pmic-dvs-3 {
>> - samsung,pins = "gpj4-3";
>> - samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
>> - samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
>> - samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
>> - };
>> +/* pinctrl_3*/
>> +/* Drive SPI lines at x2 for better integrity */
>> +&spi2_bus {
>> + samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
>> };
>>
> Maybe move this spi2_bus part to patch #07 as the commit does not
> mention this change.
>
Right, it should be part of #7.
Best regards,
Krzysztof
On Fri, 31 Dec 2021 17:23:09 +0100, Krzysztof Kozlowski wrote:
> Convert the Samsung SoC (S3C24xx, S3C64xx, S5Pv210, Exynos) pin
> controller bindings to DT schema format. Parts of description and DTS
> example was copied from existing sources, so keep the license as
> GPL-2.0-only.
>
> Signed-off-by: Krzysztof Kozlowski <[email protected]>
> ---
> .../pinctrl/samsung,pinctrl-gpio-bank.yaml | 52 +++
> .../pinctrl/samsung,pinctrl-pins-cfg.yaml | 81 ++++
> .../samsung,pinctrl-wakeup-interrupt.yaml | 76 ++++
> .../bindings/pinctrl/samsung,pinctrl.yaml | 381 +++++++++++++++++
> .../bindings/pinctrl/samsung-pinctrl.txt | 383 ------------------
> MAINTAINERS | 2 +-
> 6 files changed, 591 insertions(+), 384 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/pinctrl/samsung,pinctrl-gpio-bank.yaml
> create mode 100644 Documentation/devicetree/bindings/pinctrl/samsung,pinctrl-pins-cfg.yaml
> create mode 100644 Documentation/devicetree/bindings/pinctrl/samsung,pinctrl-wakeup-interrupt.yaml
> create mode 100644 Documentation/devicetree/bindings/pinctrl/samsung,pinctrl.yaml
> delete mode 100644 Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt
>
Reviewed-by: Rob Herring <[email protected]>