Hi all,
Here are the patches for MAX 10 BMC core/SPI interface split and
addition of the PMCI interface. There are a few supporting rearrangement
patches prior to the actual split.
I had to move flash MUX control back from sec driver to PMCI because
there will be other drivers that also read flash (e.g., log driver). It
also lead to realization that the flash_mutex wasn't enough to handle
reads during an update (erase + write) but the update has to be tracked
independent of just the write itself. BMC will manage flash MUX at that
point and reads got -ETIMEDOUT in v5 when update was already in
progress but not yet doing write. In v6, the reads return -EBUSY during
an update. These changes impact the last patch of the series.
As both Yilun and Lee seemed to find it better to not put the register
defines into the .c files, I've left them into header file starting from
v6 and just renamed them such that it's more obvious the define relates
to one board type.
The patch set is based on top of 60ce26d10e58 ("fpga: m10bmc-sec: Fix
probe rollback").
v6:
- Move flash MUX control back to PMCI driver (other drivers besides
secure update such as log driver depend on it while reading the flash)
- Track updates independent of write itself using bool flash_busy
- Return -EBUSY for flash reads during update (erase+write)
- Add type specific ops & ->rsu_status() into the sec update driver
to handle RSU status in different registers inside the driver.
- Corrected handling of unaligned tail in bulk read
- Rename raw doorbell parameters to doorbell_reg
- Drop unnecessary PMCI telemetry reg defines
- Keep defines include/linux/mfd/intel-m10-bmc.h
- More register defines with N3000/N6000 prefix
- Define flash timeouts only once, remove the other
- Add correct includes for linux/mfd/intel-m10-bmc.h
- Simplified rename variable patch tags
v5:
- Explain flash MUX rollback path in commit message
- Fix RSU status field register location
v4:
- Use board type for naming defines & structs
- Set .reg_read/write and call devm_regmap_init() directly
- Rename indirect_bus_*() funcs to indirect_*()
- Move indirect code into intel-m10-bmc-pmci so funcs can be static
- Drop module licence GPL v2 - GPL change
v3:
- Move regmap indirect into BMC PMCI module
- Get rid of "generalization" of cmd offsets and values, back to v1 #defines
- Tweak Kconfig & Makefile
- Rename intel-m10-bmc-pmci to intel-m10-bmc-pmci-main
- Rework sec update read/write paths
- Sec update driver code effectively uses the SPI side code from v2
- Rename m10bmc_sec_write() to m10bmc_sec_fw_write()
- Rename flash_ops to flash_bulk_ops and make them optional
- Move flash MUX and flash_mutex handling into sec update driver
- Prevent simultaneous flash bulk write & read using flash_mutex
- Keep M10BMC_STAGING_BASE in header (now used in the sec update code)
- Rebased on top of leak fix "fpga: m10bmc-sec: Fix probe rollback"
v2:
- Drop type from mfd side, the platform info takes care of differentation
- Explain introducing ->info to struct m10bmc in commit message (belongs logically there)
- Intro PMCI better
- Improve naming
- Rename M10BMC_PMCI_FLASH_CTRL to M10BMC_PMCI_FLASH_MUX_CTRL
- Use m10bmc_pmci/M10BMC_PMCI prefix consistently
- Use M10BMC_SPI prefix for SPI related defines
- Newly added stuff gets m10bmc_spi prefix
- Removed dev from struct m10bmc_pmci_device
- Rename "n_offset" variable to "offset" in PMCI flash ops
- Always issue idle command in regmap indirect to clear RD/WR/ACK bits
- Handle stride misaligned sizes in flash read/write ops
Ilpo Järvinen (11):
mfd: intel-m10-bmc: Add missing includes to header
mfd: intel-m10-bmc: Create m10bmc_platform_info for type specific info
mfd: intel-m10-bmc: Rename the local variables
mfd: intel-m10-bmc: Split into core and spi specific parts
mfd: intel-m10-bmc: Support multiple CSR register layouts
fpga: intel-m10-bmc: Rework flash read/write
mfd: intel-m10-bmc: Prefix register defines with M10BMC_N3000
fpga: m10bmc-sec: Create helpers for rsu status/progress checks
fpga: m10bmc-sec: Make rsu status type specific
mfd: intel-m10-bmc: Add PMCI driver
fpga: m10bmc-sec: Add support for N6000
.../ABI/testing/sysfs-driver-intel-m10-bmc | 8 +-
MAINTAINERS | 2 +-
drivers/fpga/Kconfig | 2 +-
drivers/fpga/intel-m10-bmc-sec-update.c | 415 ++++++++++------
drivers/hwmon/Kconfig | 2 +-
drivers/mfd/Kconfig | 32 +-
drivers/mfd/Makefile | 5 +-
drivers/mfd/intel-m10-bmc-core.c | 122 +++++
drivers/mfd/intel-m10-bmc-pmci.c | 455 ++++++++++++++++++
drivers/mfd/intel-m10-bmc-spi.c | 168 +++++++
drivers/mfd/intel-m10-bmc.c | 238 ---------
include/linux/mfd/intel-m10-bmc.h | 205 ++++++--
12 files changed, 1221 insertions(+), 433 deletions(-)
create mode 100644 drivers/mfd/intel-m10-bmc-core.c
create mode 100644 drivers/mfd/intel-m10-bmc-pmci.c
create mode 100644 drivers/mfd/intel-m10-bmc-spi.c
delete mode 100644 drivers/mfd/intel-m10-bmc.c
--
2.30.2
Add support for PMCI-based flash access path and N6000 sec update
support. Access to flash staging area is different for N6000 from that
of the SPI interfaced counterparts.
Introduce intel_m10bmc_flash_bulk_ops to allow interface specific
differentiations for the flash access path for sec update and make
m10bmc_sec_read/write() in sec update driver to use the new operations.
The .flash_mutex serializes read/read. Flash update (erase+write) must
use ->lock/unlock_write() to prevent reads during update (reads would
timeout on setting flash MUX as BMC will prevent it).
Create a type specific RSU status reg handler for N6000 because the
field has moved from doorbell to auth result register.
If a failure is detected while altering the flash MUX, it seems safer
to try to set it back and doesn't seem harmful. Likely there are enough
troubles in that case anyway so setting it back fails too (which is
harmless sans the small extra delay) or just confirms that the value
wasn't changed.
Co-developed-by: Tianfei zhang <[email protected]>
Signed-off-by: Tianfei zhang <[email protected]>
Co-developed-by: Russ Weight <[email protected]>
Signed-off-by: Russ Weight <[email protected]>
Acked-by: Xu Yilun <[email protected]>
Signed-off-by: Ilpo Järvinen <[email protected]>
---
drivers/fpga/intel-m10-bmc-sec-update.c | 51 ++++-
drivers/mfd/intel-m10-bmc-pmci.c | 242 +++++++++++++++++++++++-
include/linux/mfd/intel-m10-bmc.h | 51 +++++
3 files changed, 336 insertions(+), 8 deletions(-)
diff --git a/drivers/fpga/intel-m10-bmc-sec-update.c b/drivers/fpga/intel-m10-bmc-sec-update.c
index 47c0d5c6a4a3..f0acedc80182 100644
--- a/drivers/fpga/intel-m10-bmc-sec-update.c
+++ b/drivers/fpga/intel-m10-bmc-sec-update.c
@@ -48,6 +48,9 @@ static int m10bmc_sec_write(struct m10bmc_sec *sec, const u8 *buf, u32 offset, u
u32 leftover_tmp = 0;
int ret;
+ if (sec->m10bmc->flash_bulk_ops)
+ return sec->m10bmc->flash_bulk_ops->write(m10bmc, buf, offset, size);
+
if (WARN_ON_ONCE(stride > sizeof(leftover_tmp)))
return -EINVAL;
@@ -78,6 +81,9 @@ static int m10bmc_sec_read(struct m10bmc_sec *sec, u8 *buf, u32 addr, u32 size)
u32 leftover_tmp;
int ret;
+ if (sec->m10bmc->flash_bulk_ops)
+ return sec->m10bmc->flash_bulk_ops->read(m10bmc, buf, addr, size);
+
if (WARN_ON_ONCE(stride > sizeof(leftover_tmp)))
return -EINVAL;
@@ -277,6 +283,19 @@ static int m10bmc_sec_n3000_rsu_status(struct m10bmc_sec *sec)
return FIELD_GET(DRBL_RSU_STATUS, doorbell);
}
+static int m10bmc_sec_n6000_rsu_status(struct m10bmc_sec *sec)
+{
+ const struct m10bmc_csr_map *csr_map = sec->m10bmc->info->csr_map;
+ u32 auth_result;
+ int ret;
+
+ ret = m10bmc_sys_read(sec->m10bmc, csr_map->auth_result, &auth_result);
+ if (ret)
+ return ret;
+
+ return FIELD_GET(AUTH_RESULT_RSU_STATUS, auth_result);
+}
+
static bool rsu_status_ok(u32 status)
{
return (status == RSU_STAT_NORMAL ||
@@ -520,22 +539,33 @@ static enum fw_upload_err m10bmc_sec_prepare(struct fw_upload *fwl,
if (!size || size > M10BMC_STAGING_SIZE)
return FW_UPLOAD_ERR_INVALID_SIZE;
+ if (sec->m10bmc->flash_bulk_ops)
+ if (sec->m10bmc->flash_bulk_ops->lock_write(sec->m10bmc))
+ return FW_UPLOAD_ERR_BUSY;
+
ret = rsu_check_idle(sec);
if (ret != FW_UPLOAD_ERR_NONE)
- return ret;
+ goto unlock_flash;
ret = rsu_update_init(sec);
if (ret != FW_UPLOAD_ERR_NONE)
- return ret;
+ goto unlock_flash;
ret = rsu_prog_ready(sec);
if (ret != FW_UPLOAD_ERR_NONE)
- return ret;
+ goto unlock_flash;
- if (sec->cancel_request)
- return rsu_cancel(sec);
+ if (sec->cancel_request) {
+ ret = rsu_cancel(sec);
+ goto unlock_flash;
+ }
return FW_UPLOAD_ERR_NONE;
+
+unlock_flash:
+ if (sec->m10bmc->flash_bulk_ops)
+ sec->m10bmc->flash_bulk_ops->unlock_write(sec->m10bmc);
+ return ret;
}
#define WRITE_BLOCK_SIZE 0x4000 /* Default write-block size is 0x4000 bytes */
@@ -622,6 +652,9 @@ static void m10bmc_sec_cleanup(struct fw_upload *fwl)
struct m10bmc_sec *sec = fwl->dd_handle;
(void)rsu_cancel(sec);
+
+ if (sec->m10bmc->flash_bulk_ops)
+ sec->m10bmc->flash_bulk_ops->unlock_write(sec->m10bmc);
}
static const struct fw_upload_ops m10bmc_ops = {
@@ -636,6 +669,10 @@ static const struct m10bmc_sec_ops m10sec_n3000_ops = {
.rsu_status = m10bmc_sec_n3000_rsu_status,
};
+static const struct m10bmc_sec_ops m10sec_n6000_ops = {
+ .rsu_status = m10bmc_sec_n6000_rsu_status,
+};
+
#define SEC_UPDATE_LEN_MAX 32
static int m10bmc_sec_probe(struct platform_device *pdev)
{
@@ -705,6 +742,10 @@ static const struct platform_device_id intel_m10bmc_sec_ids[] = {
.name = "d5005bmc-sec-update",
.driver_data = (kernel_ulong_t)&m10sec_n3000_ops,
},
+ {
+ .name = "n6000bmc-sec-update",
+ .driver_data = (kernel_ulong_t)&m10sec_n6000_ops,
+ },
{ }
};
MODULE_DEVICE_TABLE(platform, intel_m10bmc_sec_ids);
diff --git a/drivers/mfd/intel-m10-bmc-pmci.c b/drivers/mfd/intel-m10-bmc-pmci.c
index 975019f644b5..8821f1876dd6 100644
--- a/drivers/mfd/intel-m10-bmc-pmci.c
+++ b/drivers/mfd/intel-m10-bmc-pmci.c
@@ -6,16 +6,20 @@
* Copyright (C) 2020-2023 Intel Corporation.
*/
+#include <linux/bitfield.h>
#include <linux/device.h>
#include <linux/dfl.h>
#include <linux/mfd/core.h>
#include <linux/mfd/intel-m10-bmc.h>
+#include <linux/minmax.h>
#include <linux/module.h>
#include <linux/regmap.h>
struct m10bmc_pmci_device {
void __iomem *base;
struct intel_m10bmc m10bmc;
+ struct mutex flash_mutex; /* protects flash_busy and serializes flash read/read */
+ bool flash_busy;
};
/*
@@ -114,6 +118,215 @@ static int indirect_reg_write(void *context, unsigned int reg, unsigned int val)
return ret2;
}
+static void pmci_write_fifo(void __iomem *base, const u32 *buf, size_t count)
+{
+ while (count--)
+ writel(*buf++, base);
+}
+
+static void pmci_read_fifo(void __iomem *base, u32 *buf, size_t count)
+{
+ while (count--)
+ *buf++ = readl(base);
+}
+
+static u32 pmci_get_write_space(struct m10bmc_pmci_device *pmci)
+{
+ u32 val;
+ int ret;
+
+ ret = read_poll_timeout(readl, val,
+ FIELD_GET(M10BMC_N6000_FLASH_FIFO_SPACE, val) ==
+ M10BMC_N6000_FIFO_MAX_WORDS,
+ M10BMC_FLASH_INT_US, M10BMC_FLASH_TIMEOUT_US,
+ false, pmci->base + M10BMC_N6000_FLASH_CTRL);
+ if (ret == -ETIMEDOUT)
+ return 0;
+
+ return FIELD_GET(M10BMC_N6000_FLASH_FIFO_SPACE, val) * M10BMC_N6000_FIFO_WORD_SIZE;
+}
+
+static int pmci_flash_bulk_write(struct intel_m10bmc *m10bmc, const u8 *buf, u32 size)
+{
+ struct m10bmc_pmci_device *pmci = container_of(m10bmc, struct m10bmc_pmci_device, m10bmc);
+ u32 blk_size, offset = 0, write_count;
+
+ while (size) {
+ blk_size = min(pmci_get_write_space(pmci), size);
+ if (blk_size == 0) {
+ dev_err(m10bmc->dev, "get FIFO available size fail\n");
+ return -EIO;
+ }
+
+ if (size < M10BMC_N6000_FIFO_WORD_SIZE)
+ break;
+
+ write_count = blk_size / M10BMC_N6000_FIFO_WORD_SIZE;
+ pmci_write_fifo(pmci->base + M10BMC_N6000_FLASH_FIFO,
+ (u32 *)(buf + offset), write_count);
+
+ size -= blk_size;
+ offset += blk_size;
+ }
+
+ /* Handle remainder (less than M10BMC_N6000_FIFO_WORD_SIZE bytes) */
+ if (size) {
+ u32 tmp = 0;
+
+ memcpy(&tmp, buf + offset, size);
+ pmci_write_fifo(pmci->base + M10BMC_N6000_FLASH_FIFO, &tmp, 1);
+ }
+
+ return 0;
+}
+
+static int pmci_flash_bulk_read(struct intel_m10bmc *m10bmc, u8 *buf, u32 addr, u32 size)
+{
+ struct m10bmc_pmci_device *pmci = container_of(m10bmc, struct m10bmc_pmci_device, m10bmc);
+ u32 blk_size, offset = 0, val, full_read_count, read_count;
+ int ret;
+
+ while (size) {
+ blk_size = min_t(u32, size, M10BMC_N6000_READ_BLOCK_SIZE);
+ full_read_count = blk_size / M10BMC_N6000_FIFO_WORD_SIZE;
+
+ read_count = full_read_count;
+ if (full_read_count * M10BMC_N6000_FIFO_WORD_SIZE < blk_size)
+ read_count++;
+
+ writel(addr + offset, pmci->base + M10BMC_N6000_FLASH_ADDR);
+ writel(FIELD_PREP(M10BMC_N6000_FLASH_READ_COUNT, read_count) |
+ M10BMC_N6000_FLASH_RD_MODE,
+ pmci->base + M10BMC_N6000_FLASH_CTRL);
+
+ ret = readl_poll_timeout((pmci->base + M10BMC_N6000_FLASH_CTRL), val,
+ !(val & M10BMC_N6000_FLASH_BUSY),
+ M10BMC_FLASH_INT_US, M10BMC_FLASH_TIMEOUT_US);
+ if (ret) {
+ dev_err(m10bmc->dev, "read timed out on reading flash 0x%xn", val);
+ return ret;
+ }
+
+ pmci_read_fifo(pmci->base + M10BMC_N6000_FLASH_FIFO,
+ (u32 *)(buf + offset), full_read_count);
+
+ size -= blk_size;
+ offset += blk_size;
+
+ if (full_read_count < read_count)
+ break;
+
+ writel(0, pmci->base + M10BMC_N6000_FLASH_CTRL);
+ }
+
+ /* Handle remainder (less than M10BMC_N6000_FIFO_WORD_SIZE bytes) */
+ if (size) {
+ u32 tmp;
+
+ pmci_read_fifo(pmci->base + M10BMC_N6000_FLASH_FIFO, &tmp, 1);
+ memcpy(buf + offset, &tmp, size);
+
+ writel(0, pmci->base + M10BMC_N6000_FLASH_CTRL);
+ }
+
+ return 0;
+}
+
+static int m10bmc_pmci_set_flash_host_mux(struct intel_m10bmc *m10bmc, bool request)
+{
+ u32 ctrl;
+ int ret;
+
+ ret = regmap_update_bits(m10bmc->regmap, M10BMC_N6000_FLASH_MUX_CTRL,
+ M10BMC_N6000_FLASH_HOST_REQUEST,
+ FIELD_PREP(M10BMC_N6000_FLASH_HOST_REQUEST, request));
+ if (ret)
+ return ret;
+
+ return regmap_read_poll_timeout(m10bmc->regmap,
+ M10BMC_N6000_FLASH_MUX_CTRL, ctrl,
+ request ?
+ (get_flash_mux(ctrl) == M10BMC_N6000_FLASH_MUX_HOST) :
+ (get_flash_mux(ctrl) != M10BMC_N6000_FLASH_MUX_HOST),
+ M10BMC_FLASH_INT_US, M10BMC_FLASH_TIMEOUT_US);
+}
+
+static int m10bmc_pmci_flash_read(struct intel_m10bmc *m10bmc, u8 *buf, u32 addr, u32 size)
+{
+ struct m10bmc_pmci_device *pmci = container_of(m10bmc, struct m10bmc_pmci_device, m10bmc);
+ int ret, ret2;
+
+ mutex_lock(&pmci->flash_mutex);
+ if (pmci->flash_busy) {
+ ret = -EBUSY;
+ goto unlock;
+ }
+
+ ret = m10bmc_pmci_set_flash_host_mux(m10bmc, true);
+ if (ret)
+ goto mux_fail;
+
+ ret = pmci_flash_bulk_read(m10bmc, buf, addr, size);
+
+mux_fail:
+ ret2 = m10bmc_pmci_set_flash_host_mux(m10bmc, false);
+
+unlock:
+ mutex_unlock(&pmci->flash_mutex);
+ if (ret)
+ return ret;
+ return ret2;
+}
+
+static int m10bmc_pmci_flash_write(struct intel_m10bmc *m10bmc, const u8 *buf, u32 offset, u32 size)
+{
+ struct m10bmc_pmci_device *pmci = container_of(m10bmc, struct m10bmc_pmci_device, m10bmc);
+ int ret;
+
+ mutex_lock(&pmci->flash_mutex);
+ WARN_ON_ONCE(!pmci->flash_busy);
+ /* On write, firmware manages flash MUX */
+ ret = pmci_flash_bulk_write(m10bmc, buf + offset, size);
+ mutex_unlock(&pmci->flash_mutex);
+
+ return ret;
+}
+
+static int m10bmc_pmci_flash_lock(struct intel_m10bmc *m10bmc)
+{
+ struct m10bmc_pmci_device *pmci = container_of(m10bmc, struct m10bmc_pmci_device, m10bmc);
+ int ret = 0;
+
+ mutex_lock(&pmci->flash_mutex);
+ if (pmci->flash_busy) {
+ ret = -EBUSY;
+ goto unlock;
+ }
+
+ pmci->flash_busy = true;
+
+unlock:
+ mutex_unlock(&pmci->flash_mutex);
+ return ret;
+}
+
+static void m10bmc_pmci_flash_unlock(struct intel_m10bmc *m10bmc)
+{
+ struct m10bmc_pmci_device *pmci = container_of(m10bmc, struct m10bmc_pmci_device, m10bmc);
+
+ mutex_lock(&pmci->flash_mutex);
+ WARN_ON_ONCE(!pmci->flash_busy);
+ pmci->flash_busy = false;
+ mutex_unlock(&pmci->flash_mutex);
+}
+
+static const struct intel_m10bmc_flash_bulk_ops m10bmc_pmci_flash_bulk_ops = {
+ .read = m10bmc_pmci_flash_read,
+ .write = m10bmc_pmci_flash_write,
+ .lock_write = m10bmc_pmci_flash_lock,
+ .unlock_write = m10bmc_pmci_flash_unlock,
+};
+
static const struct regmap_range m10bmc_pmci_regmap_range[] = {
regmap_reg_range(M10BMC_N6000_SYS_BASE, M10BMC_N6000_SYS_END),
};
@@ -136,6 +349,7 @@ static struct regmap_config m10bmc_pmci_regmap_config = {
static struct mfd_cell m10bmc_pmci_n6000_bmc_subdevs[] = {
{ .name = "n6000bmc-hwmon" },
+ { .name = "n6000bmc-sec-update" },
};
static const struct m10bmc_csr_map m10bmc_n6000_csr_map = {
@@ -169,11 +383,13 @@ static int m10bmc_pmci_probe(struct dfl_device *ddev)
struct device *dev = &ddev->dev;
struct m10bmc_pmci_device *pmci;
struct indirect_ctx *ctx;
+ int ret;
pmci = devm_kzalloc(dev, sizeof(*pmci), GFP_KERNEL);
if (!pmci)
return -ENOMEM;
+ pmci->m10bmc.flash_bulk_ops = &m10bmc_pmci_flash_bulk_ops;
pmci->m10bmc.dev = dev;
pmci->base = devm_ioremap_resource(dev, &ddev->mmio_res);
@@ -184,15 +400,34 @@ static int m10bmc_pmci_probe(struct dfl_device *ddev)
if (!ctx)
return -ENOMEM;
+ mutex_init(&pmci->flash_mutex);
+
ctx->base = pmci->base + M10BMC_N6000_INDIRECT_BASE;
ctx->dev = dev;
indirect_clear_cmd(ctx);
pmci->m10bmc.regmap = devm_regmap_init(dev, NULL, ctx, &m10bmc_pmci_regmap_config);
- if (IS_ERR(pmci->m10bmc.regmap))
- return PTR_ERR(pmci->m10bmc.regmap);
+ if (IS_ERR(pmci->m10bmc.regmap)) {
+ ret = PTR_ERR(pmci->m10bmc.regmap);
+ goto destroy_mutex;
+ }
+
+ ret = m10bmc_dev_init(&pmci->m10bmc, &m10bmc_pmci_n6000);
+ if (ret)
+ goto destroy_mutex;
+ return 0;
+
+destroy_mutex:
+ mutex_destroy(&pmci->flash_mutex);
+ return ret;
+}
+
+static void m10bmc_pmci_remove(struct dfl_device *ddev)
+{
+ struct intel_m10bmc *m10bmc = dev_get_drvdata(&ddev->dev);
+ struct m10bmc_pmci_device *pmci = container_of(m10bmc, struct m10bmc_pmci_device, m10bmc);
- return m10bmc_dev_init(&pmci->m10bmc, &m10bmc_pmci_n6000);
+ mutex_destroy(&pmci->flash_mutex);
}
#define FME_FEATURE_ID_M10BMC_PMCI 0x12
@@ -210,6 +445,7 @@ static struct dfl_driver m10bmc_pmci_driver = {
},
.id_table = m10bmc_pmci_ids,
.probe = m10bmc_pmci_probe,
+ .remove = m10bmc_pmci_remove,
};
module_dfl_driver(m10bmc_pmci_driver);
diff --git a/include/linux/mfd/intel-m10-bmc.h b/include/linux/mfd/intel-m10-bmc.h
index 810534b1bd12..1812ebfa11a8 100644
--- a/include/linux/mfd/intel-m10-bmc.h
+++ b/include/linux/mfd/intel-m10-bmc.h
@@ -127,6 +127,7 @@
#define M10BMC_N6000_DOORBELL 0x1c0
#define M10BMC_N6000_AUTH_RESULT 0x1c4
+#define AUTH_RESULT_RSU_STATUS GENMASK(23, 16)
#define M10BMC_N6000_BUILD_VER 0x0
#define NIOS2_N6000_FW_VERSION 0x4
@@ -148,6 +149,35 @@
#define M10BMC_N6000_STAGING_FLASH_COUNT 0x7ff5000
+#define M10BMC_N6000_FLASH_MUX_CTRL 0x1d0
+#define M10BMC_N6000_FLASH_MUX_SELECTION GENMASK(2, 0)
+#define M10BMC_N6000_FLASH_MUX_IDLE 0
+#define M10BMC_N6000_FLASH_MUX_NIOS 1
+#define M10BMC_N6000_FLASH_MUX_HOST 2
+#define M10BMC_N6000_FLASH_MUX_PFL 4
+#define get_flash_mux(mux) FIELD_GET(M10BMC_N6000_FLASH_MUX_SELECTION, mux)
+
+#define M10BMC_N6000_FLASH_NIOS_REQUEST BIT(4)
+#define M10BMC_N6000_FLASH_HOST_REQUEST BIT(5)
+
+#define M10BMC_N6000_FLASH_CTRL 0x40
+#define M10BMC_N6000_FLASH_WR_MODE BIT(0)
+#define M10BMC_N6000_FLASH_RD_MODE BIT(1)
+#define M10BMC_N6000_FLASH_BUSY BIT(2)
+#define M10BMC_N6000_FLASH_FIFO_SPACE GENMASK(13, 4)
+#define M10BMC_N6000_FLASH_READ_COUNT GENMASK(25, 16)
+
+#define M10BMC_N6000_FLASH_ADDR 0x44
+#define M10BMC_N6000_FLASH_FIFO 0x800
+#define M10BMC_N6000_READ_BLOCK_SIZE 0x800
+#define M10BMC_N6000_FIFO_MAX_BYTES 0x800
+#define M10BMC_N6000_FIFO_WORD_SIZE 4
+#define M10BMC_N6000_FIFO_MAX_WORDS (M10BMC_N6000_FIFO_MAX_BYTES / \
+ M10BMC_N6000_FIFO_WORD_SIZE)
+
+#define M10BMC_FLASH_INT_US 1
+#define M10BMC_FLASH_TIMEOUT_US 10000
+
/**
* struct m10bmc_csr_map - Intel MAX 10 BMC CSR register map
*/
@@ -183,16 +213,37 @@ struct intel_m10bmc_platform_info {
const struct m10bmc_csr_map *csr_map;
};
+struct intel_m10bmc;
+
+/**
+ * struct intel_m10bmc_flash_bulk_ops - device specific operations for flash R/W
+ * @read: read a block of data from flash
+ * @write: write a block of data to flash
+ * @lock_write: locks flash access for erase+write
+ * @unlock_write: unlock flash access
+ *
+ * Write must be protected with @lock_write and @unlock_write. While the flash
+ * is locked, @read returns -EBUSY.
+ */
+struct intel_m10bmc_flash_bulk_ops {
+ int (*read)(struct intel_m10bmc *m10bmc, u8 *buf, u32 addr, u32 size);
+ int (*write)(struct intel_m10bmc *m10bmc, const u8 *buf, u32 offset, u32 size);
+ int (*lock_write)(struct intel_m10bmc *m10bmc);
+ void (*unlock_write)(struct intel_m10bmc *m10bmc);
+};
+
/**
* struct intel_m10bmc - Intel MAX 10 BMC parent driver data structure
* @dev: this device
* @regmap: the regmap used to access registers by m10bmc itself
* @info: the platform information for MAX10 BMC
+ * @flash_bulk_ops: optional device specific operations for flash R/W
*/
struct intel_m10bmc {
struct device *dev;
struct regmap *regmap;
const struct intel_m10bmc_platform_info *info;
+ const struct intel_m10bmc_flash_bulk_ops *flash_bulk_ops;
};
/*
--
2.30.2
linux/mfd/intel-m10-bmc.h is using:
- pr_err(), thus include also linux/dev_printk.h
- FIELD_GET(), this include also linux/bitfield.h
- GENMASK(), thus include also linux/bits.h
Signed-off-by: Ilpo Järvinen <[email protected]>
---
include/linux/mfd/intel-m10-bmc.h | 3 +++
1 file changed, 3 insertions(+)
diff --git a/include/linux/mfd/intel-m10-bmc.h b/include/linux/mfd/intel-m10-bmc.h
index f0044b14136e..0d4db5d9d5af 100644
--- a/include/linux/mfd/intel-m10-bmc.h
+++ b/include/linux/mfd/intel-m10-bmc.h
@@ -7,6 +7,9 @@
#ifndef __MFD_INTEL_M10_BMC_H
#define __MFD_INTEL_M10_BMC_H
+#include <linux/bitfield.h>
+#include <linux/bits.h>
+#include <linux/dev_printk.h>
#include <linux/regmap.h>
#define M10BMC_LEGACY_BUILD_VER 0x300468
--
2.30.2
Local variables directly interact with dev_get_drvdata/dev_set_drvdata
should be named ddata.
Reviewed-by: Russ Weight <[email protected]>
Reviewed-by: Xu Yilun <[email protected]>
Acked-for-MFD-by: Lee Jones <[email protected]>
Signed-off-by: Ilpo Järvinen <[email protected]>
---
drivers/mfd/intel-m10-bmc.c | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/drivers/mfd/intel-m10-bmc.c b/drivers/mfd/intel-m10-bmc.c
index 12c522c16d83..2c26203c4799 100644
--- a/drivers/mfd/intel-m10-bmc.c
+++ b/drivers/mfd/intel-m10-bmc.c
@@ -81,15 +81,15 @@ static DEVICE_ATTR_RO(bmcfw_version);
static ssize_t mac_address_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
- struct intel_m10bmc *max10 = dev_get_drvdata(dev);
+ struct intel_m10bmc *ddata = dev_get_drvdata(dev);
unsigned int macaddr_low, macaddr_high;
int ret;
- ret = m10bmc_sys_read(max10, M10BMC_MAC_LOW, &macaddr_low);
+ ret = m10bmc_sys_read(ddata, M10BMC_MAC_LOW, &macaddr_low);
if (ret)
return ret;
- ret = m10bmc_sys_read(max10, M10BMC_MAC_HIGH, &macaddr_high);
+ ret = m10bmc_sys_read(ddata, M10BMC_MAC_HIGH, &macaddr_high);
if (ret)
return ret;
@@ -106,11 +106,11 @@ static DEVICE_ATTR_RO(mac_address);
static ssize_t mac_count_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
- struct intel_m10bmc *max10 = dev_get_drvdata(dev);
+ struct intel_m10bmc *ddata = dev_get_drvdata(dev);
unsigned int macaddr_high;
int ret;
- ret = m10bmc_sys_read(max10, M10BMC_MAC_HIGH, &macaddr_high);
+ ret = m10bmc_sys_read(ddata, M10BMC_MAC_HIGH, &macaddr_high);
if (ret)
return ret;
--
2.30.2
Access to flash staging area is different for N6000 from that of the
SPI interfaced counterparts. To make it easier to differentiate flash
access path, move read/write into new functions where the new access
path can be easily placed into. Rework the unaligned access such the
behavior it matches for both read and write.
This change also renames m10bmc_sec_write() to m10bmc_sec_fw_write() as
it would have a name conflict otherwise.
Co-developed-by: Tianfei zhang <[email protected]>
Signed-off-by: Tianfei zhang <[email protected]>
Co-developed-by: Russ Weight <[email protected]>
Signed-off-by: Russ Weight <[email protected]>
Acked-by: Xu Yilun <[email protected]>
Signed-off-by: Ilpo Järvinen <[email protected]>
---
drivers/fpga/intel-m10-bmc-sec-update.c | 143 +++++++++++++-----------
1 file changed, 79 insertions(+), 64 deletions(-)
diff --git a/drivers/fpga/intel-m10-bmc-sec-update.c b/drivers/fpga/intel-m10-bmc-sec-update.c
index 798c1828899b..9922027856a4 100644
--- a/drivers/fpga/intel-m10-bmc-sec-update.c
+++ b/drivers/fpga/intel-m10-bmc-sec-update.c
@@ -31,6 +31,65 @@ static DEFINE_XARRAY_ALLOC(fw_upload_xa);
#define REH_MAGIC GENMASK(15, 0)
#define REH_SHA_NUM_BYTES GENMASK(31, 16)
+static int m10bmc_sec_write(struct m10bmc_sec *sec, const u8 *buf, u32 offset, u32 size)
+{
+ struct intel_m10bmc *m10bmc = sec->m10bmc;
+ unsigned int stride = regmap_get_reg_stride(m10bmc->regmap);
+ u32 write_count = size / stride;
+ u32 leftover_offset = write_count * stride;
+ u32 leftover_size = size - leftover_offset;
+ u32 leftover_tmp = 0;
+ int ret;
+
+ if (WARN_ON_ONCE(stride > sizeof(leftover_tmp)))
+ return -EINVAL;
+
+ ret = regmap_bulk_write(m10bmc->regmap, M10BMC_STAGING_BASE + offset,
+ buf + offset, write_count);
+ if (ret)
+ return ret;
+
+ /* If size is not aligned to stride, handle the remainder bytes with regmap_write() */
+ if (leftover_size) {
+ memcpy(&leftover_tmp, buf + leftover_offset, leftover_size);
+ ret = regmap_write(m10bmc->regmap, M10BMC_STAGING_BASE + offset + leftover_offset,
+ leftover_tmp);
+ if (ret)
+ return ret;
+ }
+
+ return 0;
+}
+
+static int m10bmc_sec_read(struct m10bmc_sec *sec, u8 *buf, u32 addr, u32 size)
+{
+ struct intel_m10bmc *m10bmc = sec->m10bmc;
+ unsigned int stride = regmap_get_reg_stride(m10bmc->regmap);
+ u32 read_count = size / stride;
+ u32 leftover_offset = read_count * stride;
+ u32 leftover_size = size - leftover_offset;
+ u32 leftover_tmp;
+ int ret;
+
+ if (WARN_ON_ONCE(stride > sizeof(leftover_tmp)))
+ return -EINVAL;
+
+ ret = regmap_bulk_read(m10bmc->regmap, addr, buf, read_count);
+ if (ret)
+ return ret;
+
+ /* If size is not aligned to stride, handle the remainder bytes with regmap_read() */
+ if (leftover_size) {
+ ret = regmap_read(m10bmc->regmap, addr + leftover_offset, &leftover_tmp);
+ if (ret)
+ return ret;
+ memcpy(buf + leftover_offset, &leftover_tmp, leftover_size);
+ }
+
+ return 0;
+}
+
+
static ssize_t
show_root_entry_hash(struct device *dev, u32 exp_magic,
u32 prog_addr, u32 reh_addr, char *buf)
@@ -38,11 +97,9 @@ show_root_entry_hash(struct device *dev, u32 exp_magic,
struct m10bmc_sec *sec = dev_get_drvdata(dev);
int sha_num_bytes, i, ret, cnt = 0;
u8 hash[REH_SHA384_SIZE];
- unsigned int stride;
u32 magic;
- stride = regmap_get_reg_stride(sec->m10bmc->regmap);
- ret = m10bmc_raw_read(sec->m10bmc, prog_addr, &magic);
+ ret = m10bmc_sec_read(sec, (u8 *)&magic, prog_addr, sizeof(magic));
if (ret)
return ret;
@@ -50,19 +107,16 @@ show_root_entry_hash(struct device *dev, u32 exp_magic,
return sysfs_emit(buf, "hash not programmed\n");
sha_num_bytes = FIELD_GET(REH_SHA_NUM_BYTES, magic) / 8;
- if ((sha_num_bytes % stride) ||
- (sha_num_bytes != REH_SHA256_SIZE &&
- sha_num_bytes != REH_SHA384_SIZE)) {
+ if (sha_num_bytes != REH_SHA256_SIZE &&
+ sha_num_bytes != REH_SHA384_SIZE) {
dev_err(sec->dev, "%s bad sha num bytes %d\n", __func__,
sha_num_bytes);
return -EINVAL;
}
- ret = regmap_bulk_read(sec->m10bmc->regmap, reh_addr,
- hash, sha_num_bytes / stride);
+ ret = m10bmc_sec_read(sec, hash, reh_addr, sha_num_bytes);
if (ret) {
- dev_err(dev, "failed to read root entry hash: %x cnt %x: %d\n",
- reh_addr, sha_num_bytes / stride, ret);
+ dev_err(dev, "failed to read root entry hash\n");
return ret;
}
@@ -98,27 +152,16 @@ DEVICE_ATTR_SEC_REH_RO(pr);
static ssize_t
show_canceled_csk(struct device *dev, u32 addr, char *buf)
{
- unsigned int i, stride, size = CSK_32ARRAY_SIZE * sizeof(u32);
+ unsigned int i, size = CSK_32ARRAY_SIZE * sizeof(u32);
struct m10bmc_sec *sec = dev_get_drvdata(dev);
DECLARE_BITMAP(csk_map, CSK_BIT_LEN);
__le32 csk_le32[CSK_32ARRAY_SIZE];
u32 csk32[CSK_32ARRAY_SIZE];
int ret;
- stride = regmap_get_reg_stride(sec->m10bmc->regmap);
- if (size % stride) {
- dev_err(sec->dev,
- "CSK vector size (0x%x) not aligned to stride (0x%x)\n",
- size, stride);
- WARN_ON_ONCE(1);
- return -EINVAL;
- }
-
- ret = regmap_bulk_read(sec->m10bmc->regmap, addr, csk_le32,
- size / stride);
+ ret = m10bmc_sec_read(sec, (u8 *)&csk_le32, addr, size);
if (ret) {
- dev_err(sec->dev, "failed to read CSK vector: %x cnt %x: %d\n",
- addr, size / stride, ret);
+ dev_err(sec->dev, "failed to read CSK vector\n");
return ret;
}
@@ -157,31 +200,20 @@ static ssize_t flash_count_show(struct device *dev,
{
struct m10bmc_sec *sec = dev_get_drvdata(dev);
const struct m10bmc_csr_map *csr_map = sec->m10bmc->info->csr_map;
- unsigned int stride, num_bits;
+ unsigned int num_bits;
u8 *flash_buf;
int cnt, ret;
- stride = regmap_get_reg_stride(sec->m10bmc->regmap);
num_bits = FLASH_COUNT_SIZE * 8;
- if (FLASH_COUNT_SIZE % stride) {
- dev_err(sec->dev,
- "FLASH_COUNT_SIZE (0x%x) not aligned to stride (0x%x)\n",
- FLASH_COUNT_SIZE, stride);
- WARN_ON_ONCE(1);
- return -EINVAL;
- }
-
flash_buf = kmalloc(FLASH_COUNT_SIZE, GFP_KERNEL);
if (!flash_buf)
return -ENOMEM;
- ret = regmap_bulk_read(sec->m10bmc->regmap, csr_map->rsu_update_counter,
- flash_buf, FLASH_COUNT_SIZE / stride);
+ ret = m10bmc_sec_read(sec, flash_buf, csr_map->rsu_update_counter,
+ FLASH_COUNT_SIZE);
if (ret) {
- dev_err(sec->dev,
- "failed to read flash count: %x cnt %x: %d\n",
- csr_map->rsu_update_counter, FLASH_COUNT_SIZE / stride, ret);
+ dev_err(sec->dev, "failed to read flash count\n");
goto exit_free;
}
cnt = num_bits - bitmap_weight((unsigned long *)flash_buf, num_bits);
@@ -465,20 +497,19 @@ static enum fw_upload_err m10bmc_sec_prepare(struct fw_upload *fwl,
#define WRITE_BLOCK_SIZE 0x4000 /* Default write-block size is 0x4000 bytes */
-static enum fw_upload_err m10bmc_sec_write(struct fw_upload *fwl, const u8 *data,
- u32 offset, u32 size, u32 *written)
+static enum fw_upload_err m10bmc_sec_fw_write(struct fw_upload *fwl, const u8 *data,
+ u32 offset, u32 size, u32 *written)
{
struct m10bmc_sec *sec = fwl->dd_handle;
const struct m10bmc_csr_map *csr_map = sec->m10bmc->info->csr_map;
- u32 blk_size, doorbell, extra_offset;
- unsigned int stride, extra = 0;
+ struct intel_m10bmc *m10bmc = sec->m10bmc;
+ u32 blk_size, doorbell;
int ret;
- stride = regmap_get_reg_stride(sec->m10bmc->regmap);
if (sec->cancel_request)
return rsu_cancel(sec);
- ret = m10bmc_sys_read(sec->m10bmc, csr_map->doorbell, &doorbell);
+ ret = m10bmc_sys_read(m10bmc, csr_map->doorbell, &doorbell);
if (ret) {
return FW_UPLOAD_ERR_RW_ERROR;
} else if (rsu_prog(doorbell) != RSU_PROG_READY) {
@@ -486,28 +517,12 @@ static enum fw_upload_err m10bmc_sec_write(struct fw_upload *fwl, const u8 *data
return FW_UPLOAD_ERR_HW_ERROR;
}
- WARN_ON_ONCE(WRITE_BLOCK_SIZE % stride);
+ WARN_ON_ONCE(WRITE_BLOCK_SIZE % regmap_get_reg_stride(m10bmc->regmap));
blk_size = min_t(u32, WRITE_BLOCK_SIZE, size);
- ret = regmap_bulk_write(sec->m10bmc->regmap,
- M10BMC_STAGING_BASE + offset,
- (void *)data + offset,
- blk_size / stride);
+ ret = m10bmc_sec_write(sec, data, offset, blk_size);
if (ret)
return FW_UPLOAD_ERR_RW_ERROR;
- /*
- * If blk_size is not aligned to stride, then handle the extra
- * bytes with regmap_write.
- */
- if (blk_size % stride) {
- extra_offset = offset + ALIGN_DOWN(blk_size, stride);
- memcpy(&extra, (u8 *)(data + extra_offset), blk_size % stride);
- ret = regmap_write(sec->m10bmc->regmap,
- M10BMC_STAGING_BASE + extra_offset, extra);
- if (ret)
- return FW_UPLOAD_ERR_RW_ERROR;
- }
-
*written = blk_size;
return FW_UPLOAD_ERR_NONE;
}
@@ -568,7 +583,7 @@ static void m10bmc_sec_cleanup(struct fw_upload *fwl)
static const struct fw_upload_ops m10bmc_ops = {
.prepare = m10bmc_sec_prepare,
- .write = m10bmc_sec_write,
+ .write = m10bmc_sec_fw_write,
.poll_complete = m10bmc_sec_poll_complete,
.cancel = m10bmc_sec_cancel,
.cleanup = m10bmc_sec_cleanup,
--
2.30.2
Split the common code from intel-m10-bmc driver into intel-m10-bmc-core
and move the SPI bus parts into an interface specific file.
intel-m10-bmc-core becomes the core MFD functions which can support
multiple bus interface like SPI bus.
Co-developed-by: Tianfei zhang <[email protected]>
Signed-off-by: Tianfei zhang <[email protected]>
Reviewed-by: Russ Weight <[email protected]>
Acked-by: Guenter Roeck <[email protected]> # hwmon
Reviewed-by: Xu Yilun <[email protected]>
Acked-for-MFD-by: Lee Jones <[email protected]>
Signed-off-by: Ilpo Järvinen <[email protected]>
---
MAINTAINERS | 2 +-
drivers/fpga/Kconfig | 2 +-
drivers/hwmon/Kconfig | 2 +-
drivers/mfd/Kconfig | 30 ++--
drivers/mfd/Makefile | 4 +-
drivers/mfd/intel-m10-bmc-core.c | 122 +++++++++++++++++
.../{intel-m10-bmc.c => intel-m10-bmc-spi.c} | 128 +++---------------
include/linux/mfd/intel-m10-bmc.h | 6 +
8 files changed, 172 insertions(+), 124 deletions(-)
create mode 100644 drivers/mfd/intel-m10-bmc-core.c
rename drivers/mfd/{intel-m10-bmc.c => intel-m10-bmc-spi.c} (59%)
diff --git a/MAINTAINERS b/MAINTAINERS
index cf0f18502372..ddfa4f8b3c80 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -10452,7 +10452,7 @@ S: Maintained
F: Documentation/ABI/testing/sysfs-driver-intel-m10-bmc
F: Documentation/hwmon/intel-m10-bmc-hwmon.rst
F: drivers/hwmon/intel-m10-bmc-hwmon.c
-F: drivers/mfd/intel-m10-bmc.c
+F: drivers/mfd/intel-m10-bmc*
F: include/linux/mfd/intel-m10-bmc.h
INTEL MENLOW THERMAL DRIVER
diff --git a/drivers/fpga/Kconfig b/drivers/fpga/Kconfig
index 6ce143dafd04..0a00763b9f28 100644
--- a/drivers/fpga/Kconfig
+++ b/drivers/fpga/Kconfig
@@ -246,7 +246,7 @@ config FPGA_MGR_VERSAL_FPGA
config FPGA_M10_BMC_SEC_UPDATE
tristate "Intel MAX10 BMC Secure Update driver"
- depends on MFD_INTEL_M10_BMC
+ depends on MFD_INTEL_M10_BMC_CORE
select FW_LOADER
select FW_UPLOAD
help
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index 7ac3daaf59ce..984a55e0f313 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -2321,7 +2321,7 @@ config SENSORS_XGENE
config SENSORS_INTEL_M10_BMC_HWMON
tristate "Intel MAX10 BMC Hardware Monitoring"
- depends on MFD_INTEL_M10_BMC
+ depends on MFD_INTEL_M10_BMC_CORE
help
This driver provides support for the hardware monitoring functionality
on Intel MAX10 BMC chip.
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 8b93856de432..a09d4ac60dc7 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -2219,18 +2219,24 @@ config SGI_MFD_IOC3
If you have an SGI Origin, Octane, or a PCI IOC3 card,
then say Y. Otherwise say N.
-config MFD_INTEL_M10_BMC
- tristate "Intel MAX 10 Board Management Controller"
- depends on SPI_MASTER
- select REGMAP_SPI_AVMM
- select MFD_CORE
- help
- Support for the Intel MAX 10 board management controller using the
- SPI interface.
-
- This driver provides common support for accessing the device,
- additional drivers must be enabled in order to use the functionality
- of the device.
+config MFD_INTEL_M10_BMC_CORE
+ tristate
+ select MFD_CORE
+ select REGMAP
+ default n
+
+config MFD_INTEL_M10_BMC_SPI
+ tristate "Intel MAX 10 Board Management Controller with SPI"
+ depends on SPI_MASTER
+ select MFD_INTEL_M10_BMC_CORE
+ select REGMAP_SPI_AVMM
+ help
+ Support for the Intel MAX 10 board management controller using the
+ SPI interface.
+
+ This driver provides common support for accessing the device,
+ additional drivers must be enabled in order to use the functionality
+ of the device.
config MFD_RSMU_I2C
tristate "Renesas Synchronization Management Unit with I2C"
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index 7ed3ef4a698c..5d1f308ee2a7 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -271,7 +271,9 @@ obj-$(CONFIG_MFD_QCOM_PM8008) += qcom-pm8008.o
obj-$(CONFIG_SGI_MFD_IOC3) += ioc3.o
obj-$(CONFIG_MFD_SIMPLE_MFD_I2C) += simple-mfd-i2c.o
-obj-$(CONFIG_MFD_INTEL_M10_BMC) += intel-m10-bmc.o
+
+obj-$(CONFIG_MFD_INTEL_M10_BMC_CORE) += intel-m10-bmc-core.o
+obj-$(CONFIG_MFD_INTEL_M10_BMC_SPI) += intel-m10-bmc-spi.o
obj-$(CONFIG_MFD_ATC260X) += atc260x-core.o
obj-$(CONFIG_MFD_ATC260X_I2C) += atc260x-i2c.o
diff --git a/drivers/mfd/intel-m10-bmc-core.c b/drivers/mfd/intel-m10-bmc-core.c
new file mode 100644
index 000000000000..dd26e3a6c3ab
--- /dev/null
+++ b/drivers/mfd/intel-m10-bmc-core.c
@@ -0,0 +1,122 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Intel MAX 10 Board Management Controller chip - common code
+ *
+ * Copyright (C) 2018-2020 Intel Corporation. All rights reserved.
+ */
+
+#include <linux/bitfield.h>
+#include <linux/device.h>
+#include <linux/dev_printk.h>
+#include <linux/mfd/core.h>
+#include <linux/mfd/intel-m10-bmc.h>
+#include <linux/module.h>
+
+static ssize_t bmc_version_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct intel_m10bmc *ddata = dev_get_drvdata(dev);
+ unsigned int val;
+ int ret;
+
+ ret = m10bmc_sys_read(ddata, M10BMC_BUILD_VER, &val);
+ if (ret)
+ return ret;
+
+ return sprintf(buf, "0x%x\n", val);
+}
+static DEVICE_ATTR_RO(bmc_version);
+
+static ssize_t bmcfw_version_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct intel_m10bmc *ddata = dev_get_drvdata(dev);
+ unsigned int val;
+ int ret;
+
+ ret = m10bmc_sys_read(ddata, NIOS2_FW_VERSION, &val);
+ if (ret)
+ return ret;
+
+ return sprintf(buf, "0x%x\n", val);
+}
+static DEVICE_ATTR_RO(bmcfw_version);
+
+static ssize_t mac_address_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct intel_m10bmc *ddata = dev_get_drvdata(dev);
+ unsigned int macaddr_low, macaddr_high;
+ int ret;
+
+ ret = m10bmc_sys_read(ddata, M10BMC_MAC_LOW, &macaddr_low);
+ if (ret)
+ return ret;
+
+ ret = m10bmc_sys_read(ddata, M10BMC_MAC_HIGH, &macaddr_high);
+ if (ret)
+ return ret;
+
+ return sysfs_emit(buf, "%02x:%02x:%02x:%02x:%02x:%02x\n",
+ (u8)FIELD_GET(M10BMC_MAC_BYTE1, macaddr_low),
+ (u8)FIELD_GET(M10BMC_MAC_BYTE2, macaddr_low),
+ (u8)FIELD_GET(M10BMC_MAC_BYTE3, macaddr_low),
+ (u8)FIELD_GET(M10BMC_MAC_BYTE4, macaddr_low),
+ (u8)FIELD_GET(M10BMC_MAC_BYTE5, macaddr_high),
+ (u8)FIELD_GET(M10BMC_MAC_BYTE6, macaddr_high));
+}
+static DEVICE_ATTR_RO(mac_address);
+
+static ssize_t mac_count_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct intel_m10bmc *ddata = dev_get_drvdata(dev);
+ unsigned int macaddr_high;
+ int ret;
+
+ ret = m10bmc_sys_read(ddata, M10BMC_MAC_HIGH, &macaddr_high);
+ if (ret)
+ return ret;
+
+ return sysfs_emit(buf, "%u\n", (u8)FIELD_GET(M10BMC_MAC_COUNT, macaddr_high));
+}
+static DEVICE_ATTR_RO(mac_count);
+
+static struct attribute *m10bmc_attrs[] = {
+ &dev_attr_bmc_version.attr,
+ &dev_attr_bmcfw_version.attr,
+ &dev_attr_mac_address.attr,
+ &dev_attr_mac_count.attr,
+ NULL,
+};
+
+static const struct attribute_group m10bmc_group = {
+ .attrs = m10bmc_attrs,
+};
+
+const struct attribute_group *m10bmc_dev_groups[] = {
+ &m10bmc_group,
+ NULL,
+};
+EXPORT_SYMBOL_GPL(m10bmc_dev_groups);
+
+int m10bmc_dev_init(struct intel_m10bmc *m10bmc, const struct intel_m10bmc_platform_info *info)
+{
+ int ret;
+
+ m10bmc->info = info;
+ dev_set_drvdata(m10bmc->dev, m10bmc);
+
+ ret = devm_mfd_add_devices(m10bmc->dev, PLATFORM_DEVID_AUTO,
+ info->cells, info->n_cells,
+ NULL, 0, NULL);
+ if (ret)
+ dev_err(m10bmc->dev, "Failed to register sub-devices: %d\n", ret);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(m10bmc_dev_init);
+
+MODULE_DESCRIPTION("Intel MAX 10 BMC core driver");
+MODULE_AUTHOR("Intel Corporation");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/mfd/intel-m10-bmc.c b/drivers/mfd/intel-m10-bmc-spi.c
similarity index 59%
rename from drivers/mfd/intel-m10-bmc.c
rename to drivers/mfd/intel-m10-bmc-spi.c
index 2c26203c4799..be1d4ddedabb 100644
--- a/drivers/mfd/intel-m10-bmc.c
+++ b/drivers/mfd/intel-m10-bmc-spi.c
@@ -5,29 +5,14 @@
* Copyright (C) 2018-2020 Intel Corporation. All rights reserved.
*/
#include <linux/bitfield.h>
+#include <linux/dev_printk.h>
#include <linux/init.h>
#include <linux/mfd/core.h>
#include <linux/mfd/intel-m10-bmc.h>
#include <linux/module.h>
-#include <linux/mutex.h>
#include <linux/regmap.h>
#include <linux/spi/spi.h>
-static struct mfd_cell m10bmc_d5005_subdevs[] = {
- { .name = "d5005bmc-hwmon" },
- { .name = "d5005bmc-sec-update" }
-};
-
-static struct mfd_cell m10bmc_pacn3000_subdevs[] = {
- { .name = "n3000bmc-hwmon" },
- { .name = "n3000bmc-retimer" },
- { .name = "n3000bmc-sec-update" },
-};
-
-static struct mfd_cell m10bmc_n5010_subdevs[] = {
- { .name = "n5010bmc-hwmon" },
-};
-
static const struct regmap_range m10bmc_regmap_range[] = {
regmap_reg_range(M10BMC_LEGACY_BUILD_VER, M10BMC_LEGACY_BUILD_VER),
regmap_reg_range(M10BMC_SYS_BASE, M10BMC_SYS_END),
@@ -48,86 +33,6 @@ static struct regmap_config intel_m10bmc_regmap_config = {
.max_register = M10BMC_MEM_END,
};
-static ssize_t bmc_version_show(struct device *dev,
- struct device_attribute *attr, char *buf)
-{
- struct intel_m10bmc *ddata = dev_get_drvdata(dev);
- unsigned int val;
- int ret;
-
- ret = m10bmc_sys_read(ddata, M10BMC_BUILD_VER, &val);
- if (ret)
- return ret;
-
- return sprintf(buf, "0x%x\n", val);
-}
-static DEVICE_ATTR_RO(bmc_version);
-
-static ssize_t bmcfw_version_show(struct device *dev,
- struct device_attribute *attr, char *buf)
-{
- struct intel_m10bmc *ddata = dev_get_drvdata(dev);
- unsigned int val;
- int ret;
-
- ret = m10bmc_sys_read(ddata, NIOS2_FW_VERSION, &val);
- if (ret)
- return ret;
-
- return sprintf(buf, "0x%x\n", val);
-}
-static DEVICE_ATTR_RO(bmcfw_version);
-
-static ssize_t mac_address_show(struct device *dev,
- struct device_attribute *attr, char *buf)
-{
- struct intel_m10bmc *ddata = dev_get_drvdata(dev);
- unsigned int macaddr_low, macaddr_high;
- int ret;
-
- ret = m10bmc_sys_read(ddata, M10BMC_MAC_LOW, &macaddr_low);
- if (ret)
- return ret;
-
- ret = m10bmc_sys_read(ddata, M10BMC_MAC_HIGH, &macaddr_high);
- if (ret)
- return ret;
-
- return sysfs_emit(buf, "%02x:%02x:%02x:%02x:%02x:%02x\n",
- (u8)FIELD_GET(M10BMC_MAC_BYTE1, macaddr_low),
- (u8)FIELD_GET(M10BMC_MAC_BYTE2, macaddr_low),
- (u8)FIELD_GET(M10BMC_MAC_BYTE3, macaddr_low),
- (u8)FIELD_GET(M10BMC_MAC_BYTE4, macaddr_low),
- (u8)FIELD_GET(M10BMC_MAC_BYTE5, macaddr_high),
- (u8)FIELD_GET(M10BMC_MAC_BYTE6, macaddr_high));
-}
-static DEVICE_ATTR_RO(mac_address);
-
-static ssize_t mac_count_show(struct device *dev,
- struct device_attribute *attr, char *buf)
-{
- struct intel_m10bmc *ddata = dev_get_drvdata(dev);
- unsigned int macaddr_high;
- int ret;
-
- ret = m10bmc_sys_read(ddata, M10BMC_MAC_HIGH, &macaddr_high);
- if (ret)
- return ret;
-
- return sysfs_emit(buf, "%u\n",
- (u8)FIELD_GET(M10BMC_MAC_COUNT, macaddr_high));
-}
-static DEVICE_ATTR_RO(mac_count);
-
-static struct attribute *m10bmc_attrs[] = {
- &dev_attr_bmc_version.attr,
- &dev_attr_bmcfw_version.attr,
- &dev_attr_mac_address.attr,
- &dev_attr_mac_count.attr,
- NULL,
-};
-ATTRIBUTE_GROUPS(m10bmc);
-
static int check_m10bmc_version(struct intel_m10bmc *ddata)
{
unsigned int v;
@@ -166,11 +71,9 @@ static int intel_m10_bmc_spi_probe(struct spi_device *spi)
return -ENOMEM;
info = (struct intel_m10bmc_platform_info *)id->driver_data;
- ddata->info = info;
ddata->dev = dev;
- ddata->regmap =
- devm_regmap_init_spi_avmm(spi, &intel_m10bmc_regmap_config);
+ ddata->regmap = devm_regmap_init_spi_avmm(spi, &intel_m10bmc_regmap_config);
if (IS_ERR(ddata->regmap)) {
ret = PTR_ERR(ddata->regmap);
dev_err(dev, "Failed to allocate regmap: %d\n", ret);
@@ -185,15 +88,24 @@ static int intel_m10_bmc_spi_probe(struct spi_device *spi)
return ret;
}
- ret = devm_mfd_add_devices(dev, PLATFORM_DEVID_AUTO,
- info->cells, info->n_cells,
- NULL, 0, NULL);
- if (ret)
- dev_err(dev, "Failed to register sub-devices: %d\n", ret);
-
- return ret;
+ return m10bmc_dev_init(ddata, info);
}
+static struct mfd_cell m10bmc_d5005_subdevs[] = {
+ { .name = "d5005bmc-hwmon" },
+ { .name = "d5005bmc-sec-update" },
+};
+
+static struct mfd_cell m10bmc_pacn3000_subdevs[] = {
+ { .name = "n3000bmc-hwmon" },
+ { .name = "n3000bmc-retimer" },
+ { .name = "n3000bmc-sec-update" },
+};
+
+static struct mfd_cell m10bmc_n5010_subdevs[] = {
+ { .name = "n5010bmc-hwmon" },
+};
+
static const struct intel_m10bmc_platform_info m10bmc_spi_n3000 = {
.cells = m10bmc_pacn3000_subdevs,
.n_cells = ARRAY_SIZE(m10bmc_pacn3000_subdevs),
@@ -220,14 +132,14 @@ MODULE_DEVICE_TABLE(spi, m10bmc_spi_id);
static struct spi_driver intel_m10bmc_spi_driver = {
.driver = {
.name = "intel-m10-bmc",
- .dev_groups = m10bmc_groups,
+ .dev_groups = m10bmc_dev_groups,
},
.probe = intel_m10_bmc_spi_probe,
.id_table = m10bmc_spi_id,
};
module_spi_driver(intel_m10bmc_spi_driver);
-MODULE_DESCRIPTION("Intel MAX 10 BMC Device Driver");
+MODULE_DESCRIPTION("Intel MAX 10 BMC SPI bus interface");
MODULE_AUTHOR("Intel Corporation");
MODULE_LICENSE("GPL v2");
MODULE_ALIAS("spi:intel-m10-bmc");
diff --git a/include/linux/mfd/intel-m10-bmc.h b/include/linux/mfd/intel-m10-bmc.h
index f418cad88e64..a80deb61b69a 100644
--- a/include/linux/mfd/intel-m10-bmc.h
+++ b/include/linux/mfd/intel-m10-bmc.h
@@ -174,4 +174,10 @@ m10bmc_raw_read(struct intel_m10bmc *m10bmc, unsigned int addr,
#define m10bmc_sys_read(m10bmc, offset, val) \
m10bmc_raw_read(m10bmc, M10BMC_SYS_BASE + (offset), val)
+/*
+ * MAX10 BMC Core support
+ */
+int m10bmc_dev_init(struct intel_m10bmc *m10bmc, const struct intel_m10bmc_platform_info *info);
+extern const struct attribute_group *m10bmc_dev_groups[];
+
#endif /* __MFD_INTEL_M10_BMC_H */
--
2.30.2
BMC type specific info is currently set by a switch/case block. The
size of this info is expected to grow as more dev types and features
are added which would have made the switch block bloaty.
Store type specific info into struct and place them into .driver_data
instead because it makes things a bit cleaner.
The m10bmc_type enum can be dropped as the differentiation is now
fully handled by the platform info.
The info member of struct intel_m10bmc that is added here is not used
yet in this change but its addition logically still belongs to this
change. The CSR map change that comes after this change needs to have
the info member.
Reviewed-by: Russ Weight <[email protected]>
Reviewed-by: Xu Yilun <[email protected]>
Signed-off-by: Ilpo Järvinen <[email protected]>
---
drivers/mfd/intel-m10-bmc.c | 53 ++++++++++++++-----------------
include/linux/mfd/intel-m10-bmc.h | 12 +++++++
2 files changed, 36 insertions(+), 29 deletions(-)
diff --git a/drivers/mfd/intel-m10-bmc.c b/drivers/mfd/intel-m10-bmc.c
index 7e3319e5b22f..12c522c16d83 100644
--- a/drivers/mfd/intel-m10-bmc.c
+++ b/drivers/mfd/intel-m10-bmc.c
@@ -13,12 +13,6 @@
#include <linux/regmap.h>
#include <linux/spi/spi.h>
-enum m10bmc_type {
- M10_N3000,
- M10_D5005,
- M10_N5010,
-};
-
static struct mfd_cell m10bmc_d5005_subdevs[] = {
{ .name = "d5005bmc-hwmon" },
{ .name = "d5005bmc-sec-update" }
@@ -162,15 +156,17 @@ static int check_m10bmc_version(struct intel_m10bmc *ddata)
static int intel_m10_bmc_spi_probe(struct spi_device *spi)
{
const struct spi_device_id *id = spi_get_device_id(spi);
+ const struct intel_m10bmc_platform_info *info;
struct device *dev = &spi->dev;
- struct mfd_cell *cells;
struct intel_m10bmc *ddata;
- int ret, n_cell;
+ int ret;
ddata = devm_kzalloc(dev, sizeof(*ddata), GFP_KERNEL);
if (!ddata)
return -ENOMEM;
+ info = (struct intel_m10bmc_platform_info *)id->driver_data;
+ ddata->info = info;
ddata->dev = dev;
ddata->regmap =
@@ -189,24 +185,8 @@ static int intel_m10_bmc_spi_probe(struct spi_device *spi)
return ret;
}
- switch (id->driver_data) {
- case M10_N3000:
- cells = m10bmc_pacn3000_subdevs;
- n_cell = ARRAY_SIZE(m10bmc_pacn3000_subdevs);
- break;
- case M10_D5005:
- cells = m10bmc_d5005_subdevs;
- n_cell = ARRAY_SIZE(m10bmc_d5005_subdevs);
- break;
- case M10_N5010:
- cells = m10bmc_n5010_subdevs;
- n_cell = ARRAY_SIZE(m10bmc_n5010_subdevs);
- break;
- default:
- return -ENODEV;
- }
-
- ret = devm_mfd_add_devices(dev, PLATFORM_DEVID_AUTO, cells, n_cell,
+ ret = devm_mfd_add_devices(dev, PLATFORM_DEVID_AUTO,
+ info->cells, info->n_cells,
NULL, 0, NULL);
if (ret)
dev_err(dev, "Failed to register sub-devices: %d\n", ret);
@@ -214,10 +194,25 @@ static int intel_m10_bmc_spi_probe(struct spi_device *spi)
return ret;
}
+static const struct intel_m10bmc_platform_info m10bmc_spi_n3000 = {
+ .cells = m10bmc_pacn3000_subdevs,
+ .n_cells = ARRAY_SIZE(m10bmc_pacn3000_subdevs),
+};
+
+static const struct intel_m10bmc_platform_info m10bmc_spi_d5005 = {
+ .cells = m10bmc_d5005_subdevs,
+ .n_cells = ARRAY_SIZE(m10bmc_d5005_subdevs),
+};
+
+static const struct intel_m10bmc_platform_info m10bmc_spi_n5010 = {
+ .cells = m10bmc_n5010_subdevs,
+ .n_cells = ARRAY_SIZE(m10bmc_n5010_subdevs),
+};
+
static const struct spi_device_id m10bmc_spi_id[] = {
- { "m10-n3000", M10_N3000 },
- { "m10-d5005", M10_D5005 },
- { "m10-n5010", M10_N5010 },
+ { "m10-n3000", (kernel_ulong_t)&m10bmc_spi_n3000 },
+ { "m10-d5005", (kernel_ulong_t)&m10bmc_spi_d5005 },
+ { "m10-n5010", (kernel_ulong_t)&m10bmc_spi_n5010 },
{ }
};
MODULE_DEVICE_TABLE(spi, m10bmc_spi_id);
diff --git a/include/linux/mfd/intel-m10-bmc.h b/include/linux/mfd/intel-m10-bmc.h
index 0d4db5d9d5af..f418cad88e64 100644
--- a/include/linux/mfd/intel-m10-bmc.h
+++ b/include/linux/mfd/intel-m10-bmc.h
@@ -121,14 +121,26 @@
/* Address of 4KB inverted bit vector containing staging area FLASH count */
#define STAGING_FLASH_COUNT 0x17ffb000
+/**
+ * struct intel_m10bmc_platform_info - Intel MAX 10 BMC platform specific information
+ * @cells: MFD cells
+ * @n_cells: MFD cells ARRAY_SIZE()
+ */
+struct intel_m10bmc_platform_info {
+ struct mfd_cell *cells;
+ int n_cells;
+};
+
/**
* struct intel_m10bmc - Intel MAX 10 BMC parent driver data structure
* @dev: this device
* @regmap: the regmap used to access registers by m10bmc itself
+ * @info: the platform information for MAX10 BMC
*/
struct intel_m10bmc {
struct device *dev;
struct regmap *regmap;
+ const struct intel_m10bmc_platform_info *info;
};
/*
--
2.30.2
Prefix the M10BMC defines register defines with M10BMC_N3000 to make it
more obvious these are related to some board type. All current
non-N3000 board types have the same layout so they'll be reused. The
less generic makes it more obvious they're not meant for the
generic/interface agnostic code.
Reviewed-by: Russ Weight <[email protected]>
Reviewed-by: Xu Yilun <[email protected]>
Signed-off-by: Ilpo Järvinen <[email protected]>
---
drivers/mfd/intel-m10-bmc-core.c | 14 +++----
drivers/mfd/intel-m10-bmc-spi.c | 52 ++++++++++++------------
include/linux/mfd/intel-m10-bmc.h | 66 +++++++++++++++----------------
3 files changed, 66 insertions(+), 66 deletions(-)
diff --git a/drivers/mfd/intel-m10-bmc-core.c b/drivers/mfd/intel-m10-bmc-core.c
index cbea8d4f68fa..dac9cf7bcb4a 100644
--- a/drivers/mfd/intel-m10-bmc-core.c
+++ b/drivers/mfd/intel-m10-bmc-core.c
@@ -58,12 +58,12 @@ static ssize_t mac_address_show(struct device *dev,
return ret;
return sysfs_emit(buf, "%02x:%02x:%02x:%02x:%02x:%02x\n",
- (u8)FIELD_GET(M10BMC_MAC_BYTE1, macaddr_low),
- (u8)FIELD_GET(M10BMC_MAC_BYTE2, macaddr_low),
- (u8)FIELD_GET(M10BMC_MAC_BYTE3, macaddr_low),
- (u8)FIELD_GET(M10BMC_MAC_BYTE4, macaddr_low),
- (u8)FIELD_GET(M10BMC_MAC_BYTE5, macaddr_high),
- (u8)FIELD_GET(M10BMC_MAC_BYTE6, macaddr_high));
+ (u8)FIELD_GET(M10BMC_N3000_MAC_BYTE1, macaddr_low),
+ (u8)FIELD_GET(M10BMC_N3000_MAC_BYTE2, macaddr_low),
+ (u8)FIELD_GET(M10BMC_N3000_MAC_BYTE3, macaddr_low),
+ (u8)FIELD_GET(M10BMC_N3000_MAC_BYTE4, macaddr_low),
+ (u8)FIELD_GET(M10BMC_N3000_MAC_BYTE5, macaddr_high),
+ (u8)FIELD_GET(M10BMC_N3000_MAC_BYTE6, macaddr_high));
}
static DEVICE_ATTR_RO(mac_address);
@@ -78,7 +78,7 @@ static ssize_t mac_count_show(struct device *dev,
if (ret)
return ret;
- return sysfs_emit(buf, "%u\n", (u8)FIELD_GET(M10BMC_MAC_COUNT, macaddr_high));
+ return sysfs_emit(buf, "%u\n", (u8)FIELD_GET(M10BMC_N3000_MAC_COUNT, macaddr_high));
}
static DEVICE_ATTR_RO(mac_count);
diff --git a/drivers/mfd/intel-m10-bmc-spi.c b/drivers/mfd/intel-m10-bmc-spi.c
index 3ed7a71a3267..957200e17fed 100644
--- a/drivers/mfd/intel-m10-bmc-spi.c
+++ b/drivers/mfd/intel-m10-bmc-spi.c
@@ -14,9 +14,9 @@
#include <linux/spi/spi.h>
static const struct regmap_range m10bmc_regmap_range[] = {
- regmap_reg_range(M10BMC_LEGACY_BUILD_VER, M10BMC_LEGACY_BUILD_VER),
- regmap_reg_range(M10BMC_SYS_BASE, M10BMC_SYS_END),
- regmap_reg_range(M10BMC_FLASH_BASE, M10BMC_FLASH_END),
+ regmap_reg_range(M10BMC_N3000_LEGACY_BUILD_VER, M10BMC_N3000_LEGACY_BUILD_VER),
+ regmap_reg_range(M10BMC_N3000_SYS_BASE, M10BMC_N3000_SYS_END),
+ regmap_reg_range(M10BMC_N3000_FLASH_BASE, M10BMC_N3000_FLASH_END),
};
static const struct regmap_access_table m10bmc_access_table = {
@@ -30,7 +30,7 @@ static struct regmap_config intel_m10bmc_regmap_config = {
.reg_stride = 4,
.wr_table = &m10bmc_access_table,
.rd_table = &m10bmc_access_table,
- .max_register = M10BMC_MEM_END,
+ .max_register = M10BMC_N3000_MEM_END,
};
static int check_m10bmc_version(struct intel_m10bmc *ddata)
@@ -41,16 +41,16 @@ static int check_m10bmc_version(struct intel_m10bmc *ddata)
/*
* This check is to filter out the very old legacy BMC versions. In the
* old BMC chips, the BMC version info is stored in the old version
- * register (M10BMC_LEGACY_BUILD_VER), so its read out value would have
- * not been M10BMC_VER_LEGACY_INVALID (0xffffffff). But in new BMC
+ * register (M10BMC_N3000_LEGACY_BUILD_VER), so its read out value would have
+ * not been M10BMC_N3000_VER_LEGACY_INVALID (0xffffffff). But in new BMC
* chips that the driver supports, the value of this register should be
- * M10BMC_VER_LEGACY_INVALID.
+ * M10BMC_N3000_VER_LEGACY_INVALID.
*/
- ret = m10bmc_raw_read(ddata, M10BMC_LEGACY_BUILD_VER, &v);
+ ret = m10bmc_raw_read(ddata, M10BMC_N3000_LEGACY_BUILD_VER, &v);
if (ret)
return -ENODEV;
- if (v != M10BMC_VER_LEGACY_INVALID) {
+ if (v != M10BMC_N3000_VER_LEGACY_INVALID) {
dev_err(ddata->dev, "bad version M10BMC detected\n");
return -ENODEV;
}
@@ -92,23 +92,23 @@ static int intel_m10_bmc_spi_probe(struct spi_device *spi)
}
static const struct m10bmc_csr_map m10bmc_n3000_csr_map = {
- .base = M10BMC_SYS_BASE,
- .build_version = M10BMC_BUILD_VER,
- .fw_version = NIOS2_FW_VERSION,
- .mac_low = M10BMC_MAC_LOW,
- .mac_high = M10BMC_MAC_HIGH,
- .doorbell = M10BMC_DOORBELL,
- .auth_result = M10BMC_AUTH_RESULT,
- .bmc_prog_addr = BMC_PROG_ADDR,
- .bmc_reh_addr = BMC_REH_ADDR,
- .bmc_magic = BMC_PROG_MAGIC,
- .sr_prog_addr = SR_PROG_ADDR,
- .sr_reh_addr = SR_REH_ADDR,
- .sr_magic = SR_PROG_MAGIC,
- .pr_prog_addr = PR_PROG_ADDR,
- .pr_reh_addr = PR_REH_ADDR,
- .pr_magic = PR_PROG_MAGIC,
- .rsu_update_counter = STAGING_FLASH_COUNT,
+ .base = M10BMC_N3000_SYS_BASE,
+ .build_version = M10BMC_N3000_BUILD_VER,
+ .fw_version = NIOS2_N3000_FW_VERSION,
+ .mac_low = M10BMC_N3000_MAC_LOW,
+ .mac_high = M10BMC_N3000_MAC_HIGH,
+ .doorbell = M10BMC_N3000_DOORBELL,
+ .auth_result = M10BMC_N3000_AUTH_RESULT,
+ .bmc_prog_addr = M10BMC_N3000_BMC_PROG_ADDR,
+ .bmc_reh_addr = M10BMC_N3000_BMC_REH_ADDR,
+ .bmc_magic = M10BMC_N3000_BMC_PROG_MAGIC,
+ .sr_prog_addr = M10BMC_N3000_SR_PROG_ADDR,
+ .sr_reh_addr = M10BMC_N3000_SR_REH_ADDR,
+ .sr_magic = M10BMC_N3000_SR_PROG_MAGIC,
+ .pr_prog_addr = M10BMC_N3000_PR_PROG_ADDR,
+ .pr_reh_addr = M10BMC_N3000_PR_REH_ADDR,
+ .pr_magic = M10BMC_N3000_PR_PROG_MAGIC,
+ .rsu_update_counter = M10BMC_N3000_STAGING_FLASH_COUNT,
};
static struct mfd_cell m10bmc_d5005_subdevs[] = {
diff --git a/include/linux/mfd/intel-m10-bmc.h b/include/linux/mfd/intel-m10-bmc.h
index d569a72c7d4f..470dc3773c01 100644
--- a/include/linux/mfd/intel-m10-bmc.h
+++ b/include/linux/mfd/intel-m10-bmc.h
@@ -12,38 +12,38 @@
#include <linux/dev_printk.h>
#include <linux/regmap.h>
-#define M10BMC_LEGACY_BUILD_VER 0x300468
-#define M10BMC_SYS_BASE 0x300800
-#define M10BMC_SYS_END 0x300fff
-#define M10BMC_FLASH_BASE 0x10000000
-#define M10BMC_FLASH_END 0x1fffffff
-#define M10BMC_MEM_END M10BMC_FLASH_END
+#define M10BMC_N3000_LEGACY_BUILD_VER 0x300468
+#define M10BMC_N3000_SYS_BASE 0x300800
+#define M10BMC_N3000_SYS_END 0x300fff
+#define M10BMC_N3000_FLASH_BASE 0x10000000
+#define M10BMC_N3000_FLASH_END 0x1fffffff
+#define M10BMC_N3000_MEM_END M10BMC_N3000_FLASH_END
#define M10BMC_STAGING_BASE 0x18000000
#define M10BMC_STAGING_SIZE 0x3800000
/* Register offset of system registers */
-#define NIOS2_FW_VERSION 0x0
-#define M10BMC_MAC_LOW 0x10
-#define M10BMC_MAC_BYTE4 GENMASK(7, 0)
-#define M10BMC_MAC_BYTE3 GENMASK(15, 8)
-#define M10BMC_MAC_BYTE2 GENMASK(23, 16)
-#define M10BMC_MAC_BYTE1 GENMASK(31, 24)
-#define M10BMC_MAC_HIGH 0x14
-#define M10BMC_MAC_BYTE6 GENMASK(7, 0)
-#define M10BMC_MAC_BYTE5 GENMASK(15, 8)
-#define M10BMC_MAC_COUNT GENMASK(23, 16)
-#define M10BMC_TEST_REG 0x3c
-#define M10BMC_BUILD_VER 0x68
-#define M10BMC_VER_MAJOR_MSK GENMASK(23, 16)
-#define M10BMC_VER_PCB_INFO_MSK GENMASK(31, 24)
-#define M10BMC_VER_LEGACY_INVALID 0xffffffff
+#define NIOS2_N3000_FW_VERSION 0x0
+#define M10BMC_N3000_MAC_LOW 0x10
+#define M10BMC_N3000_MAC_BYTE4 GENMASK(7, 0)
+#define M10BMC_N3000_MAC_BYTE3 GENMASK(15, 8)
+#define M10BMC_N3000_MAC_BYTE2 GENMASK(23, 16)
+#define M10BMC_N3000_MAC_BYTE1 GENMASK(31, 24)
+#define M10BMC_N3000_MAC_HIGH 0x14
+#define M10BMC_N3000_MAC_BYTE6 GENMASK(7, 0)
+#define M10BMC_N3000_MAC_BYTE5 GENMASK(15, 8)
+#define M10BMC_N3000_MAC_COUNT GENMASK(23, 16)
+#define M10BMC_N3000_TEST_REG 0x3c
+#define M10BMC_N3000_BUILD_VER 0x68
+#define M10BMC_N3000_VER_MAJOR_MSK GENMASK(23, 16)
+#define M10BMC_N3000_VER_PCB_INFO_MSK GENMASK(31, 24)
+#define M10BMC_N3000_VER_LEGACY_INVALID 0xffffffff
/* Secure update doorbell register, in system register region */
-#define M10BMC_DOORBELL 0x400
+#define M10BMC_N3000_DOORBELL 0x400
/* Authorization Result register, in system register region */
-#define M10BMC_AUTH_RESULT 0x404
+#define M10BMC_N3000_AUTH_RESULT 0x404
/* Doorbell register fields */
#define DRBL_RSU_REQUEST BIT(0)
@@ -106,20 +106,20 @@
#define RSU_COMPLETE_TIMEOUT_MS (40 * 60 * 1000)
/* Addresses for security related data in FLASH */
-#define BMC_REH_ADDR 0x17ffc004
-#define BMC_PROG_ADDR 0x17ffc000
-#define BMC_PROG_MAGIC 0x5746
+#define M10BMC_N3000_BMC_REH_ADDR 0x17ffc004
+#define M10BMC_N3000_BMC_PROG_ADDR 0x17ffc000
+#define M10BMC_N3000_BMC_PROG_MAGIC 0x5746
-#define SR_REH_ADDR 0x17ffd004
-#define SR_PROG_ADDR 0x17ffd000
-#define SR_PROG_MAGIC 0x5253
+#define M10BMC_N3000_SR_REH_ADDR 0x17ffd004
+#define M10BMC_N3000_SR_PROG_ADDR 0x17ffd000
+#define M10BMC_N3000_SR_PROG_MAGIC 0x5253
-#define PR_REH_ADDR 0x17ffe004
-#define PR_PROG_ADDR 0x17ffe000
-#define PR_PROG_MAGIC 0x5250
+#define M10BMC_N3000_PR_REH_ADDR 0x17ffe004
+#define M10BMC_N3000_PR_PROG_ADDR 0x17ffe000
+#define M10BMC_N3000_PR_PROG_MAGIC 0x5250
/* Address of 4KB inverted bit vector containing staging area FLASH count */
-#define STAGING_FLASH_COUNT 0x17ffb000
+#define M10BMC_N3000_STAGING_FLASH_COUNT 0x17ffb000
/**
* struct m10bmc_csr_map - Intel MAX 10 BMC CSR register map
--
2.30.2
There are different addresses for the MAX10 CSR registers. Introducing
a new data structure m10bmc_csr_map for the register definition of
MAX10 CSR.
Provide the csr_map for SPI.
Co-developed-by: Tianfei zhang <[email protected]>
Signed-off-by: Tianfei zhang <[email protected]>
Reviewed-by: Russ Weight <[email protected]>
Reviewed-by: Xu Yilun <[email protected]>
Acked-for-MFD-by: Lee Jones <[email protected]>
Signed-off-by: Ilpo Järvinen <[email protected]>
---
drivers/fpga/intel-m10-bmc-sec-update.c | 73 +++++++++++++++++--------
drivers/mfd/intel-m10-bmc-core.c | 10 ++--
drivers/mfd/intel-m10-bmc-spi.c | 23 ++++++++
include/linux/mfd/intel-m10-bmc.h | 38 +++++++++++--
4 files changed, 111 insertions(+), 33 deletions(-)
diff --git a/drivers/fpga/intel-m10-bmc-sec-update.c b/drivers/fpga/intel-m10-bmc-sec-update.c
index 03f1bd81c434..798c1828899b 100644
--- a/drivers/fpga/intel-m10-bmc-sec-update.c
+++ b/drivers/fpga/intel-m10-bmc-sec-update.c
@@ -73,16 +73,24 @@ show_root_entry_hash(struct device *dev, u32 exp_magic,
return cnt;
}
-#define DEVICE_ATTR_SEC_REH_RO(_name, _magic, _prog_addr, _reh_addr) \
+#define DEVICE_ATTR_SEC_REH_RO(_name) \
static ssize_t _name##_root_entry_hash_show(struct device *dev, \
struct device_attribute *attr, \
char *buf) \
-{ return show_root_entry_hash(dev, _magic, _prog_addr, _reh_addr, buf); } \
+{ \
+ struct m10bmc_sec *sec = dev_get_drvdata(dev); \
+ const struct m10bmc_csr_map *csr_map = sec->m10bmc->info->csr_map; \
+ \
+ return show_root_entry_hash(dev, csr_map->_name##_magic, \
+ csr_map->_name##_prog_addr, \
+ csr_map->_name##_reh_addr, \
+ buf); \
+} \
static DEVICE_ATTR_RO(_name##_root_entry_hash)
-DEVICE_ATTR_SEC_REH_RO(bmc, BMC_PROG_MAGIC, BMC_PROG_ADDR, BMC_REH_ADDR);
-DEVICE_ATTR_SEC_REH_RO(sr, SR_PROG_MAGIC, SR_PROG_ADDR, SR_REH_ADDR);
-DEVICE_ATTR_SEC_REH_RO(pr, PR_PROG_MAGIC, PR_PROG_ADDR, PR_REH_ADDR);
+DEVICE_ATTR_SEC_REH_RO(bmc);
+DEVICE_ATTR_SEC_REH_RO(sr);
+DEVICE_ATTR_SEC_REH_RO(pr);
#define CSK_BIT_LEN 128U
#define CSK_32ARRAY_SIZE DIV_ROUND_UP(CSK_BIT_LEN, 32)
@@ -122,18 +130,25 @@ show_canceled_csk(struct device *dev, u32 addr, char *buf)
return bitmap_print_to_pagebuf(1, buf, csk_map, CSK_BIT_LEN);
}
-#define DEVICE_ATTR_SEC_CSK_RO(_name, _addr) \
+#define DEVICE_ATTR_SEC_CSK_RO(_name) \
static ssize_t _name##_canceled_csks_show(struct device *dev, \
struct device_attribute *attr, \
char *buf) \
-{ return show_canceled_csk(dev, _addr, buf); } \
+{ \
+ struct m10bmc_sec *sec = dev_get_drvdata(dev); \
+ const struct m10bmc_csr_map *csr_map = sec->m10bmc->info->csr_map; \
+ \
+ return show_canceled_csk(dev, \
+ csr_map->_name##_prog_addr + CSK_VEC_OFFSET, \
+ buf); \
+} \
static DEVICE_ATTR_RO(_name##_canceled_csks)
#define CSK_VEC_OFFSET 0x34
-DEVICE_ATTR_SEC_CSK_RO(bmc, BMC_PROG_ADDR + CSK_VEC_OFFSET);
-DEVICE_ATTR_SEC_CSK_RO(sr, SR_PROG_ADDR + CSK_VEC_OFFSET);
-DEVICE_ATTR_SEC_CSK_RO(pr, PR_PROG_ADDR + CSK_VEC_OFFSET);
+DEVICE_ATTR_SEC_CSK_RO(bmc);
+DEVICE_ATTR_SEC_CSK_RO(sr);
+DEVICE_ATTR_SEC_CSK_RO(pr);
#define FLASH_COUNT_SIZE 4096 /* count stored as inverted bit vector */
@@ -141,6 +156,7 @@ static ssize_t flash_count_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct m10bmc_sec *sec = dev_get_drvdata(dev);
+ const struct m10bmc_csr_map *csr_map = sec->m10bmc->info->csr_map;
unsigned int stride, num_bits;
u8 *flash_buf;
int cnt, ret;
@@ -160,12 +176,12 @@ static ssize_t flash_count_show(struct device *dev,
if (!flash_buf)
return -ENOMEM;
- ret = regmap_bulk_read(sec->m10bmc->regmap, STAGING_FLASH_COUNT,
+ ret = regmap_bulk_read(sec->m10bmc->regmap, csr_map->rsu_update_counter,
flash_buf, FLASH_COUNT_SIZE / stride);
if (ret) {
dev_err(sec->dev,
"failed to read flash count: %x cnt %x: %d\n",
- STAGING_FLASH_COUNT, FLASH_COUNT_SIZE / stride, ret);
+ csr_map->rsu_update_counter, FLASH_COUNT_SIZE / stride, ret);
goto exit_free;
}
cnt = num_bits - bitmap_weight((unsigned long *)flash_buf, num_bits);
@@ -200,20 +216,22 @@ static const struct attribute_group *m10bmc_sec_attr_groups[] = {
static void log_error_regs(struct m10bmc_sec *sec, u32 doorbell)
{
+ const struct m10bmc_csr_map *csr_map = sec->m10bmc->info->csr_map;
u32 auth_result;
dev_err(sec->dev, "RSU error status: 0x%08x\n", doorbell);
- if (!m10bmc_sys_read(sec->m10bmc, M10BMC_AUTH_RESULT, &auth_result))
+ if (!m10bmc_sys_read(sec->m10bmc, csr_map->auth_result, &auth_result))
dev_err(sec->dev, "RSU auth result: 0x%08x\n", auth_result);
}
static enum fw_upload_err rsu_check_idle(struct m10bmc_sec *sec)
{
+ const struct m10bmc_csr_map *csr_map = sec->m10bmc->info->csr_map;
u32 doorbell;
int ret;
- ret = m10bmc_sys_read(sec->m10bmc, M10BMC_DOORBELL, &doorbell);
+ ret = m10bmc_sys_read(sec->m10bmc, csr_map->doorbell, &doorbell);
if (ret)
return FW_UPLOAD_ERR_RW_ERROR;
@@ -246,11 +264,12 @@ static inline bool rsu_start_done(u32 doorbell)
static enum fw_upload_err rsu_update_init(struct m10bmc_sec *sec)
{
+ const struct m10bmc_csr_map *csr_map = sec->m10bmc->info->csr_map;
u32 doorbell, status;
int ret;
ret = regmap_update_bits(sec->m10bmc->regmap,
- M10BMC_SYS_BASE + M10BMC_DOORBELL,
+ csr_map->base + csr_map->doorbell,
DRBL_RSU_REQUEST | DRBL_HOST_STATUS,
DRBL_RSU_REQUEST |
FIELD_PREP(DRBL_HOST_STATUS,
@@ -259,7 +278,7 @@ static enum fw_upload_err rsu_update_init(struct m10bmc_sec *sec)
return FW_UPLOAD_ERR_RW_ERROR;
ret = regmap_read_poll_timeout(sec->m10bmc->regmap,
- M10BMC_SYS_BASE + M10BMC_DOORBELL,
+ csr_map->base + csr_map->doorbell,
doorbell,
rsu_start_done(doorbell),
NIOS_HANDSHAKE_INTERVAL_US,
@@ -286,11 +305,12 @@ static enum fw_upload_err rsu_update_init(struct m10bmc_sec *sec)
static enum fw_upload_err rsu_prog_ready(struct m10bmc_sec *sec)
{
+ const struct m10bmc_csr_map *csr_map = sec->m10bmc->info->csr_map;
unsigned long poll_timeout;
u32 doorbell, progress;
int ret;
- ret = m10bmc_sys_read(sec->m10bmc, M10BMC_DOORBELL, &doorbell);
+ ret = m10bmc_sys_read(sec->m10bmc, csr_map->doorbell, &doorbell);
if (ret)
return FW_UPLOAD_ERR_RW_ERROR;
@@ -300,7 +320,7 @@ static enum fw_upload_err rsu_prog_ready(struct m10bmc_sec *sec)
if (time_after(jiffies, poll_timeout))
break;
- ret = m10bmc_sys_read(sec->m10bmc, M10BMC_DOORBELL, &doorbell);
+ ret = m10bmc_sys_read(sec->m10bmc, csr_map->doorbell, &doorbell);
if (ret)
return FW_UPLOAD_ERR_RW_ERROR;
}
@@ -319,11 +339,12 @@ static enum fw_upload_err rsu_prog_ready(struct m10bmc_sec *sec)
static enum fw_upload_err rsu_send_data(struct m10bmc_sec *sec)
{
+ const struct m10bmc_csr_map *csr_map = sec->m10bmc->info->csr_map;
u32 doorbell;
int ret;
ret = regmap_update_bits(sec->m10bmc->regmap,
- M10BMC_SYS_BASE + M10BMC_DOORBELL,
+ csr_map->base + csr_map->doorbell,
DRBL_HOST_STATUS,
FIELD_PREP(DRBL_HOST_STATUS,
HOST_STATUS_WRITE_DONE));
@@ -331,7 +352,7 @@ static enum fw_upload_err rsu_send_data(struct m10bmc_sec *sec)
return FW_UPLOAD_ERR_RW_ERROR;
ret = regmap_read_poll_timeout(sec->m10bmc->regmap,
- M10BMC_SYS_BASE + M10BMC_DOORBELL,
+ csr_map->base + csr_map->doorbell,
doorbell,
rsu_prog(doorbell) != RSU_PROG_READY,
NIOS_HANDSHAKE_INTERVAL_US,
@@ -360,7 +381,9 @@ static enum fw_upload_err rsu_send_data(struct m10bmc_sec *sec)
static int rsu_check_complete(struct m10bmc_sec *sec, u32 *doorbell)
{
- if (m10bmc_sys_read(sec->m10bmc, M10BMC_DOORBELL, doorbell))
+ const struct m10bmc_csr_map *csr_map = sec->m10bmc->info->csr_map;
+
+ if (m10bmc_sys_read(sec->m10bmc, csr_map->doorbell, doorbell))
return -EIO;
switch (rsu_stat(*doorbell)) {
@@ -389,10 +412,11 @@ static int rsu_check_complete(struct m10bmc_sec *sec, u32 *doorbell)
static enum fw_upload_err rsu_cancel(struct m10bmc_sec *sec)
{
+ const struct m10bmc_csr_map *csr_map = sec->m10bmc->info->csr_map;
u32 doorbell;
int ret;
- ret = m10bmc_sys_read(sec->m10bmc, M10BMC_DOORBELL, &doorbell);
+ ret = m10bmc_sys_read(sec->m10bmc, csr_map->doorbell, &doorbell);
if (ret)
return FW_UPLOAD_ERR_RW_ERROR;
@@ -400,7 +424,7 @@ static enum fw_upload_err rsu_cancel(struct m10bmc_sec *sec)
return FW_UPLOAD_ERR_BUSY;
ret = regmap_update_bits(sec->m10bmc->regmap,
- M10BMC_SYS_BASE + M10BMC_DOORBELL,
+ csr_map->base + csr_map->doorbell,
DRBL_HOST_STATUS,
FIELD_PREP(DRBL_HOST_STATUS,
HOST_STATUS_ABORT_RSU));
@@ -445,6 +469,7 @@ static enum fw_upload_err m10bmc_sec_write(struct fw_upload *fwl, const u8 *data
u32 offset, u32 size, u32 *written)
{
struct m10bmc_sec *sec = fwl->dd_handle;
+ const struct m10bmc_csr_map *csr_map = sec->m10bmc->info->csr_map;
u32 blk_size, doorbell, extra_offset;
unsigned int stride, extra = 0;
int ret;
@@ -453,7 +478,7 @@ static enum fw_upload_err m10bmc_sec_write(struct fw_upload *fwl, const u8 *data
if (sec->cancel_request)
return rsu_cancel(sec);
- ret = m10bmc_sys_read(sec->m10bmc, M10BMC_DOORBELL, &doorbell);
+ ret = m10bmc_sys_read(sec->m10bmc, csr_map->doorbell, &doorbell);
if (ret) {
return FW_UPLOAD_ERR_RW_ERROR;
} else if (rsu_prog(doorbell) != RSU_PROG_READY) {
diff --git a/drivers/mfd/intel-m10-bmc-core.c b/drivers/mfd/intel-m10-bmc-core.c
index dd26e3a6c3ab..cbea8d4f68fa 100644
--- a/drivers/mfd/intel-m10-bmc-core.c
+++ b/drivers/mfd/intel-m10-bmc-core.c
@@ -19,7 +19,7 @@ static ssize_t bmc_version_show(struct device *dev,
unsigned int val;
int ret;
- ret = m10bmc_sys_read(ddata, M10BMC_BUILD_VER, &val);
+ ret = m10bmc_sys_read(ddata, ddata->info->csr_map->build_version, &val);
if (ret)
return ret;
@@ -34,7 +34,7 @@ static ssize_t bmcfw_version_show(struct device *dev,
unsigned int val;
int ret;
- ret = m10bmc_sys_read(ddata, NIOS2_FW_VERSION, &val);
+ ret = m10bmc_sys_read(ddata, ddata->info->csr_map->fw_version, &val);
if (ret)
return ret;
@@ -49,11 +49,11 @@ static ssize_t mac_address_show(struct device *dev,
unsigned int macaddr_low, macaddr_high;
int ret;
- ret = m10bmc_sys_read(ddata, M10BMC_MAC_LOW, &macaddr_low);
+ ret = m10bmc_sys_read(ddata, ddata->info->csr_map->mac_low, &macaddr_low);
if (ret)
return ret;
- ret = m10bmc_sys_read(ddata, M10BMC_MAC_HIGH, &macaddr_high);
+ ret = m10bmc_sys_read(ddata, ddata->info->csr_map->mac_high, &macaddr_high);
if (ret)
return ret;
@@ -74,7 +74,7 @@ static ssize_t mac_count_show(struct device *dev,
unsigned int macaddr_high;
int ret;
- ret = m10bmc_sys_read(ddata, M10BMC_MAC_HIGH, &macaddr_high);
+ ret = m10bmc_sys_read(ddata, ddata->info->csr_map->mac_high, &macaddr_high);
if (ret)
return ret;
diff --git a/drivers/mfd/intel-m10-bmc-spi.c b/drivers/mfd/intel-m10-bmc-spi.c
index be1d4ddedabb..3ed7a71a3267 100644
--- a/drivers/mfd/intel-m10-bmc-spi.c
+++ b/drivers/mfd/intel-m10-bmc-spi.c
@@ -91,6 +91,26 @@ static int intel_m10_bmc_spi_probe(struct spi_device *spi)
return m10bmc_dev_init(ddata, info);
}
+static const struct m10bmc_csr_map m10bmc_n3000_csr_map = {
+ .base = M10BMC_SYS_BASE,
+ .build_version = M10BMC_BUILD_VER,
+ .fw_version = NIOS2_FW_VERSION,
+ .mac_low = M10BMC_MAC_LOW,
+ .mac_high = M10BMC_MAC_HIGH,
+ .doorbell = M10BMC_DOORBELL,
+ .auth_result = M10BMC_AUTH_RESULT,
+ .bmc_prog_addr = BMC_PROG_ADDR,
+ .bmc_reh_addr = BMC_REH_ADDR,
+ .bmc_magic = BMC_PROG_MAGIC,
+ .sr_prog_addr = SR_PROG_ADDR,
+ .sr_reh_addr = SR_REH_ADDR,
+ .sr_magic = SR_PROG_MAGIC,
+ .pr_prog_addr = PR_PROG_ADDR,
+ .pr_reh_addr = PR_REH_ADDR,
+ .pr_magic = PR_PROG_MAGIC,
+ .rsu_update_counter = STAGING_FLASH_COUNT,
+};
+
static struct mfd_cell m10bmc_d5005_subdevs[] = {
{ .name = "d5005bmc-hwmon" },
{ .name = "d5005bmc-sec-update" },
@@ -109,16 +129,19 @@ static struct mfd_cell m10bmc_n5010_subdevs[] = {
static const struct intel_m10bmc_platform_info m10bmc_spi_n3000 = {
.cells = m10bmc_pacn3000_subdevs,
.n_cells = ARRAY_SIZE(m10bmc_pacn3000_subdevs),
+ .csr_map = &m10bmc_n3000_csr_map,
};
static const struct intel_m10bmc_platform_info m10bmc_spi_d5005 = {
.cells = m10bmc_d5005_subdevs,
.n_cells = ARRAY_SIZE(m10bmc_d5005_subdevs),
+ .csr_map = &m10bmc_n3000_csr_map,
};
static const struct intel_m10bmc_platform_info m10bmc_spi_n5010 = {
.cells = m10bmc_n5010_subdevs,
.n_cells = ARRAY_SIZE(m10bmc_n5010_subdevs),
+ .csr_map = &m10bmc_n3000_csr_map,
};
static const struct spi_device_id m10bmc_spi_id[] = {
diff --git a/include/linux/mfd/intel-m10-bmc.h b/include/linux/mfd/intel-m10-bmc.h
index a80deb61b69a..d569a72c7d4f 100644
--- a/include/linux/mfd/intel-m10-bmc.h
+++ b/include/linux/mfd/intel-m10-bmc.h
@@ -121,14 +121,39 @@
/* Address of 4KB inverted bit vector containing staging area FLASH count */
#define STAGING_FLASH_COUNT 0x17ffb000
+/**
+ * struct m10bmc_csr_map - Intel MAX 10 BMC CSR register map
+ */
+struct m10bmc_csr_map {
+ unsigned int base;
+ unsigned int build_version;
+ unsigned int fw_version;
+ unsigned int mac_low;
+ unsigned int mac_high;
+ unsigned int doorbell;
+ unsigned int auth_result;
+ unsigned int bmc_prog_addr;
+ unsigned int bmc_reh_addr;
+ unsigned int bmc_magic;
+ unsigned int sr_prog_addr;
+ unsigned int sr_reh_addr;
+ unsigned int sr_magic;
+ unsigned int pr_prog_addr;
+ unsigned int pr_reh_addr;
+ unsigned int pr_magic;
+ unsigned int rsu_update_counter;
+};
+
/**
* struct intel_m10bmc_platform_info - Intel MAX 10 BMC platform specific information
* @cells: MFD cells
* @n_cells: MFD cells ARRAY_SIZE()
+ * @csr_map: the mappings for register definition of MAX10 BMC
*/
struct intel_m10bmc_platform_info {
struct mfd_cell *cells;
int n_cells;
+ const struct m10bmc_csr_map *csr_map;
};
/**
@@ -167,12 +192,17 @@ m10bmc_raw_read(struct intel_m10bmc *m10bmc, unsigned int addr,
* The base of the system registers could be configured by HW developers, and
* in HW SPEC, the base is not added to the addresses of the system registers.
*
- * This macro helps to simplify the accessing of the system registers. And if
+ * This function helps to simplify the accessing of the system registers. And if
* the base is reconfigured in HW, SW developers could simply change the
- * M10BMC_SYS_BASE accordingly.
+ * csr_map's base accordingly.
*/
-#define m10bmc_sys_read(m10bmc, offset, val) \
- m10bmc_raw_read(m10bmc, M10BMC_SYS_BASE + (offset), val)
+static inline int m10bmc_sys_read(struct intel_m10bmc *m10bmc, unsigned int offset,
+ unsigned int *val)
+{
+ const struct m10bmc_csr_map *csr_map = m10bmc->info->csr_map;
+
+ return m10bmc_raw_read(m10bmc, csr_map->base + offset, val);
+}
/*
* MAX10 BMC Core support
--
2.30.2
On 1/16/23 02:08, Ilpo Järvinen wrote:
> linux/mfd/intel-m10-bmc.h is using:
> - pr_err(), thus include also linux/dev_printk.h
> - FIELD_GET(), this include also linux/bitfield.h
> - GENMASK(), thus include also linux/bits.h
Reviewed-by: Russ Weight <[email protected]>
> Signed-off-by: Ilpo Järvinen <[email protected]>
> ---
> include/linux/mfd/intel-m10-bmc.h | 3 +++
> 1 file changed, 3 insertions(+)
>
> diff --git a/include/linux/mfd/intel-m10-bmc.h b/include/linux/mfd/intel-m10-bmc.h
> index f0044b14136e..0d4db5d9d5af 100644
> --- a/include/linux/mfd/intel-m10-bmc.h
> +++ b/include/linux/mfd/intel-m10-bmc.h
> @@ -7,6 +7,9 @@
> #ifndef __MFD_INTEL_M10_BMC_H
> #define __MFD_INTEL_M10_BMC_H
>
> +#include <linux/bitfield.h>
> +#include <linux/bits.h>
> +#include <linux/dev_printk.h>
> #include <linux/regmap.h>
>
> #define M10BMC_LEGACY_BUILD_VER 0x300468
On 2023-01-17 at 08:43:03 -0800, Russ Weight wrote:
>
>
> On 1/16/23 02:08, Ilpo J?rvinen wrote:
> > linux/mfd/intel-m10-bmc.h is using:
> > - pr_err(), thus include also linux/dev_printk.h
> > - FIELD_GET(), this include also linux/bitfield.h
> > - GENMASK(), thus include also linux/bits.h
>
> Reviewed-by: Russ Weight <[email protected]>
Reviewed-by: Xu Yilun <[email protected]>
>
> > Signed-off-by: Ilpo J?rvinen <[email protected]>
> > ---
> > include/linux/mfd/intel-m10-bmc.h | 3 +++
> > 1 file changed, 3 insertions(+)
> >
> > diff --git a/include/linux/mfd/intel-m10-bmc.h b/include/linux/mfd/intel-m10-bmc.h
> > index f0044b14136e..0d4db5d9d5af 100644
> > --- a/include/linux/mfd/intel-m10-bmc.h
> > +++ b/include/linux/mfd/intel-m10-bmc.h
> > @@ -7,6 +7,9 @@
> > #ifndef __MFD_INTEL_M10_BMC_H
> > #define __MFD_INTEL_M10_BMC_H
> >
> > +#include <linux/bitfield.h>
> > +#include <linux/bits.h>
> > +#include <linux/dev_printk.h>
> > #include <linux/regmap.h>
> >
> > #define M10BMC_LEGACY_BUILD_VER 0x300468
>
On Mon, 16 Jan 2023, Ilpo Järvinen wrote:
> linux/mfd/intel-m10-bmc.h is using:
> - pr_err(), thus include also linux/dev_printk.h
> - FIELD_GET(), this include also linux/bitfield.h
> - GENMASK(), thus include also linux/bits.h
>
> Signed-off-by: Ilpo Järvinen <[email protected]>
> ---
> include/linux/mfd/intel-m10-bmc.h | 3 +++
> 1 file changed, 3 insertions(+)
Applied, thanks
--
Lee Jones [李琼斯]
On Mon, 16 Jan 2023, Ilpo Järvinen wrote:
> BMC type specific info is currently set by a switch/case block. The
> size of this info is expected to grow as more dev types and features
> are added which would have made the switch block bloaty.
>
> Store type specific info into struct and place them into .driver_data
> instead because it makes things a bit cleaner.
>
> The m10bmc_type enum can be dropped as the differentiation is now
> fully handled by the platform info.
>
> The info member of struct intel_m10bmc that is added here is not used
> yet in this change but its addition logically still belongs to this
> change. The CSR map change that comes after this change needs to have
> the info member.
>
> Reviewed-by: Russ Weight <[email protected]>
> Reviewed-by: Xu Yilun <[email protected]>
> Signed-off-by: Ilpo Järvinen <[email protected]>
> ---
> drivers/mfd/intel-m10-bmc.c | 53 ++++++++++++++-----------------
> include/linux/mfd/intel-m10-bmc.h | 12 +++++++
> 2 files changed, 36 insertions(+), 29 deletions(-)
Applied, thanks
--
Lee Jones [李琼斯]
On Mon, 16 Jan 2023, Ilpo Järvinen wrote:
> Local variables directly interact with dev_get_drvdata/dev_set_drvdata
> should be named ddata.
>
> Reviewed-by: Russ Weight <[email protected]>
> Reviewed-by: Xu Yilun <[email protected]>
> Acked-for-MFD-by: Lee Jones <[email protected]>
> Signed-off-by: Ilpo Järvinen <[email protected]>
> ---
> drivers/mfd/intel-m10-bmc.c | 10 +++++-----
> 1 file changed, 5 insertions(+), 5 deletions(-)
Applied, thanks
--
Lee Jones [李琼斯]
On Mon, 16 Jan 2023, Ilpo Järvinen wrote:
> Split the common code from intel-m10-bmc driver into intel-m10-bmc-core
> and move the SPI bus parts into an interface specific file.
>
> intel-m10-bmc-core becomes the core MFD functions which can support
> multiple bus interface like SPI bus.
>
> Co-developed-by: Tianfei zhang <[email protected]>
> Signed-off-by: Tianfei zhang <[email protected]>
> Reviewed-by: Russ Weight <[email protected]>
> Acked-by: Guenter Roeck <[email protected]> # hwmon
> Reviewed-by: Xu Yilun <[email protected]>
> Acked-for-MFD-by: Lee Jones <[email protected]>
> Signed-off-by: Ilpo Järvinen <[email protected]>
> ---
> MAINTAINERS | 2 +-
> drivers/fpga/Kconfig | 2 +-
> drivers/hwmon/Kconfig | 2 +-
> drivers/mfd/Kconfig | 30 ++--
> drivers/mfd/Makefile | 4 +-
> drivers/mfd/intel-m10-bmc-core.c | 122 +++++++++++++++++
> .../{intel-m10-bmc.c => intel-m10-bmc-spi.c} | 128 +++---------------
> include/linux/mfd/intel-m10-bmc.h | 6 +
> 8 files changed, 172 insertions(+), 124 deletions(-)
> create mode 100644 drivers/mfd/intel-m10-bmc-core.c
> rename drivers/mfd/{intel-m10-bmc.c => intel-m10-bmc-spi.c} (59%)
Applied, thanks
--
Lee Jones [李琼斯]
On Mon, 16 Jan 2023, Ilpo Järvinen wrote:
> There are different addresses for the MAX10 CSR registers. Introducing
> a new data structure m10bmc_csr_map for the register definition of
> MAX10 CSR.
>
> Provide the csr_map for SPI.
>
> Co-developed-by: Tianfei zhang <[email protected]>
> Signed-off-by: Tianfei zhang <[email protected]>
> Reviewed-by: Russ Weight <[email protected]>
> Reviewed-by: Xu Yilun <[email protected]>
> Acked-for-MFD-by: Lee Jones <[email protected]>
> Signed-off-by: Ilpo Järvinen <[email protected]>
> ---
> drivers/fpga/intel-m10-bmc-sec-update.c | 73 +++++++++++++++++--------
> drivers/mfd/intel-m10-bmc-core.c | 10 ++--
> drivers/mfd/intel-m10-bmc-spi.c | 23 ++++++++
> include/linux/mfd/intel-m10-bmc.h | 38 +++++++++++--
> 4 files changed, 111 insertions(+), 33 deletions(-)
Applied, thanks
--
Lee Jones [李琼斯]
On Mon, 16 Jan 2023, Ilpo Järvinen wrote:
> Access to flash staging area is different for N6000 from that of the
> SPI interfaced counterparts. To make it easier to differentiate flash
> access path, move read/write into new functions where the new access
> path can be easily placed into. Rework the unaligned access such the
> behavior it matches for both read and write.
>
> This change also renames m10bmc_sec_write() to m10bmc_sec_fw_write() as
> it would have a name conflict otherwise.
>
> Co-developed-by: Tianfei zhang <[email protected]>
> Signed-off-by: Tianfei zhang <[email protected]>
> Co-developed-by: Russ Weight <[email protected]>
> Signed-off-by: Russ Weight <[email protected]>
> Acked-by: Xu Yilun <[email protected]>
> Signed-off-by: Ilpo Järvinen <[email protected]>
> ---
> drivers/fpga/intel-m10-bmc-sec-update.c | 143 +++++++++++++-----------
> 1 file changed, 79 insertions(+), 64 deletions(-)
Applied, thanks
--
Lee Jones [李琼斯]
On Mon, 16 Jan 2023, Ilpo Järvinen wrote:
> Prefix the M10BMC defines register defines with M10BMC_N3000 to make it
> more obvious these are related to some board type. All current
> non-N3000 board types have the same layout so they'll be reused. The
> less generic makes it more obvious they're not meant for the
> generic/interface agnostic code.
>
> Reviewed-by: Russ Weight <[email protected]>
> Reviewed-by: Xu Yilun <[email protected]>
> Signed-off-by: Ilpo Järvinen <[email protected]>
> ---
> drivers/mfd/intel-m10-bmc-core.c | 14 +++----
> drivers/mfd/intel-m10-bmc-spi.c | 52 ++++++++++++------------
> include/linux/mfd/intel-m10-bmc.h | 66 +++++++++++++++----------------
> 3 files changed, 66 insertions(+), 66 deletions(-)
Applied, thanks
--
Lee Jones [李琼斯]
Enjoy!
The following changes since commit 1b929c02afd37871d5afb9d498426f83432e71c2:
Linux 6.2-rc1 (2022-12-25 13:41:39 -0800)
are available in the Git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd.git ib-mfd-fpga-hwmon-6.3
for you to fetch changes up to 869b9eddf0b38a22c27a400e2fa849d2ff2aa7e1:
mfd: intel-m10-bmc: Add PMCI driver (2023-01-27 10:47:11 +0000)
----------------------------------------------------------------
Ilpo Järvinen (10):
mfd: intel-m10-bmc: Add missing includes to header
mfd: intel-m10-bmc: Create m10bmc_platform_info for type specific info
mfd: intel-m10-bmc: Rename the local variables
mfd: intel-m10-bmc: Split into core and spi specific parts
mfd: intel-m10-bmc: Support multiple CSR register layouts
fpga: intel-m10-bmc: Rework flash read/write
mfd: intel-m10-bmc: Prefix register defines with M10BMC_N3000
fpga: m10bmc-sec: Create helpers for rsu status/progress checks
fpga: m10bmc-sec: Make rsu status type specific
mfd: intel-m10-bmc: Add PMCI driver
.../ABI/testing/sysfs-driver-intel-m10-bmc | 8 +-
MAINTAINERS | 2 +-
drivers/fpga/Kconfig | 2 +-
drivers/fpga/intel-m10-bmc-sec-update.c | 364 +++++++++++++--------
drivers/hwmon/Kconfig | 2 +-
drivers/mfd/Kconfig | 32 +-
drivers/mfd/Makefile | 5 +-
drivers/mfd/intel-m10-bmc-core.c | 122 +++++++
drivers/mfd/intel-m10-bmc-pmci.c | 219 +++++++++++++
drivers/mfd/intel-m10-bmc-spi.c | 168 ++++++++++
drivers/mfd/intel-m10-bmc.c | 238 --------------
include/linux/mfd/intel-m10-bmc.h | 154 ++++++---
12 files changed, 888 insertions(+), 428 deletions(-)
create mode 100644 drivers/mfd/intel-m10-bmc-core.c
create mode 100644 drivers/mfd/intel-m10-bmc-pmci.c
create mode 100644 drivers/mfd/intel-m10-bmc-spi.c
delete mode 100644 drivers/mfd/intel-m10-bmc.c
--
Lee Jones [李琼斯]
Ignore this - I forgot to sign it!
On Fri, 27 Jan 2023, Lee Jones wrote:
> Enjoy!
>
> The following changes since commit 1b929c02afd37871d5afb9d498426f83432e71c2:
>
> Linux 6.2-rc1 (2022-12-25 13:41:39 -0800)
>
> are available in the Git repository at:
>
> git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd.git ib-mfd-fpga-hwmon-6.3
>
> for you to fetch changes up to 869b9eddf0b38a22c27a400e2fa849d2ff2aa7e1:
>
> mfd: intel-m10-bmc: Add PMCI driver (2023-01-27 10:47:11 +0000)
>
> ----------------------------------------------------------------
> Ilpo Järvinen (10):
> mfd: intel-m10-bmc: Add missing includes to header
> mfd: intel-m10-bmc: Create m10bmc_platform_info for type specific info
> mfd: intel-m10-bmc: Rename the local variables
> mfd: intel-m10-bmc: Split into core and spi specific parts
> mfd: intel-m10-bmc: Support multiple CSR register layouts
> fpga: intel-m10-bmc: Rework flash read/write
> mfd: intel-m10-bmc: Prefix register defines with M10BMC_N3000
> fpga: m10bmc-sec: Create helpers for rsu status/progress checks
> fpga: m10bmc-sec: Make rsu status type specific
> mfd: intel-m10-bmc: Add PMCI driver
>
> .../ABI/testing/sysfs-driver-intel-m10-bmc | 8 +-
> MAINTAINERS | 2 +-
> drivers/fpga/Kconfig | 2 +-
> drivers/fpga/intel-m10-bmc-sec-update.c | 364 +++++++++++++--------
> drivers/hwmon/Kconfig | 2 +-
> drivers/mfd/Kconfig | 32 +-
> drivers/mfd/Makefile | 5 +-
> drivers/mfd/intel-m10-bmc-core.c | 122 +++++++
> drivers/mfd/intel-m10-bmc-pmci.c | 219 +++++++++++++
> drivers/mfd/intel-m10-bmc-spi.c | 168 ++++++++++
> drivers/mfd/intel-m10-bmc.c | 238 --------------
> include/linux/mfd/intel-m10-bmc.h | 154 ++++++---
> 12 files changed, 888 insertions(+), 428 deletions(-)
> create mode 100644 drivers/mfd/intel-m10-bmc-core.c
> create mode 100644 drivers/mfd/intel-m10-bmc-pmci.c
> create mode 100644 drivers/mfd/intel-m10-bmc-spi.c
> delete mode 100644 drivers/mfd/intel-m10-bmc.c
>
> --
> Lee Jones [李琼斯]
--
Lee Jones [李琼斯]
Enjoy!
The following changes since commit 1b929c02afd37871d5afb9d498426f83432e71c2:
Linux 6.2-rc1 (2022-12-25 13:41:39 -0800)
are available in the Git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd.git tags/ib-mfd-fpga-hwmon-v6.3
for you to fetch changes up to 869b9eddf0b38a22c27a400e2fa849d2ff2aa7e1:
mfd: intel-m10-bmc: Add PMCI driver (2023-01-27 10:47:11 +0000)
----------------------------------------------------------------
Immutable branch between MFD, FPGA and HWMON due for the v6.3 merge window
----------------------------------------------------------------
Ilpo Järvinen (10):
mfd: intel-m10-bmc: Add missing includes to header
mfd: intel-m10-bmc: Create m10bmc_platform_info for type specific info
mfd: intel-m10-bmc: Rename the local variables
mfd: intel-m10-bmc: Split into core and spi specific parts
mfd: intel-m10-bmc: Support multiple CSR register layouts
fpga: intel-m10-bmc: Rework flash read/write
mfd: intel-m10-bmc: Prefix register defines with M10BMC_N3000
fpga: m10bmc-sec: Create helpers for rsu status/progress checks
fpga: m10bmc-sec: Make rsu status type specific
mfd: intel-m10-bmc: Add PMCI driver
.../ABI/testing/sysfs-driver-intel-m10-bmc | 8 +-
MAINTAINERS | 2 +-
drivers/fpga/Kconfig | 2 +-
drivers/fpga/intel-m10-bmc-sec-update.c | 364 +++++++++++++--------
drivers/hwmon/Kconfig | 2 +-
drivers/mfd/Kconfig | 32 +-
drivers/mfd/Makefile | 5 +-
drivers/mfd/intel-m10-bmc-core.c | 122 +++++++
drivers/mfd/intel-m10-bmc-pmci.c | 219 +++++++++++++
drivers/mfd/intel-m10-bmc-spi.c | 168 ++++++++++
drivers/mfd/intel-m10-bmc.c | 238 --------------
include/linux/mfd/intel-m10-bmc.h | 154 ++++++---
12 files changed, 888 insertions(+), 428 deletions(-)
create mode 100644 drivers/mfd/intel-m10-bmc-core.c
create mode 100644 drivers/mfd/intel-m10-bmc-pmci.c
create mode 100644 drivers/mfd/intel-m10-bmc-spi.c
delete mode 100644 drivers/mfd/intel-m10-bmc.c
--
Lee Jones [李琼斯]
On Fri, 27 Jan 2023, Lee Jones wrote:
> Enjoy!
>
> The following changes since commit 1b929c02afd37871d5afb9d498426f83432e71c2:
>
> Linux 6.2-rc1 (2022-12-25 13:41:39 -0800)
>
> are available in the Git repository at:
>
> git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd.git ib-mfd-fpga-hwmon-6.3
>
> for you to fetch changes up to 869b9eddf0b38a22c27a400e2fa849d2ff2aa7e1:
>
> mfd: intel-m10-bmc: Add PMCI driver (2023-01-27 10:47:11 +0000)
>
> ----------------------------------------------------------------
> Ilpo J?rvinen (10):
> mfd: intel-m10-bmc: Add missing includes to header
> mfd: intel-m10-bmc: Create m10bmc_platform_info for type specific info
> mfd: intel-m10-bmc: Rename the local variables
> mfd: intel-m10-bmc: Split into core and spi specific parts
> mfd: intel-m10-bmc: Support multiple CSR register layouts
> fpga: intel-m10-bmc: Rework flash read/write
> mfd: intel-m10-bmc: Prefix register defines with M10BMC_N3000
> fpga: m10bmc-sec: Create helpers for rsu status/progress checks
> fpga: m10bmc-sec: Make rsu status type specific
> mfd: intel-m10-bmc: Add PMCI driver
Hi Lee,
Thanks. I was left to wonder is there some particular reason for why 11/11
was not taken among the others? Did I perhaps end up giving a wrong
impression in the cover letter that it wouldn't have been complete yet?
--
i.
On 2023-01-27 at 17:10:40 +0000, Lee Jones wrote:
> Enjoy!
>
> The following changes since commit 1b929c02afd37871d5afb9d498426f83432e71c2:
>
> Linux 6.2-rc1 (2022-12-25 13:41:39 -0800)
>
> are available in the Git repository at:
>
> git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd.git tags/ib-mfd-fpga-hwmon-v6.3
I've already pulled it to fpga tree and pushed to Greg as the merge
window is near.
Patch #11 is left. I could make another pull request if it got acked by
Lee soon, or we wait for the next cycle.
Thanks,
Yilun
>
> for you to fetch changes up to 869b9eddf0b38a22c27a400e2fa849d2ff2aa7e1:
>
> mfd: intel-m10-bmc: Add PMCI driver (2023-01-27 10:47:11 +0000)
>
> ----------------------------------------------------------------
> Immutable branch between MFD, FPGA and HWMON due for the v6.3 merge window
>
> ----------------------------------------------------------------
> Ilpo Järvinen (10):
> mfd: intel-m10-bmc: Add missing includes to header
> mfd: intel-m10-bmc: Create m10bmc_platform_info for type specific info
> mfd: intel-m10-bmc: Rename the local variables
> mfd: intel-m10-bmc: Split into core and spi specific parts
> mfd: intel-m10-bmc: Support multiple CSR register layouts
> fpga: intel-m10-bmc: Rework flash read/write
> mfd: intel-m10-bmc: Prefix register defines with M10BMC_N3000
> fpga: m10bmc-sec: Create helpers for rsu status/progress checks
> fpga: m10bmc-sec: Make rsu status type specific
> mfd: intel-m10-bmc: Add PMCI driver
>
> .../ABI/testing/sysfs-driver-intel-m10-bmc | 8 +-
> MAINTAINERS | 2 +-
> drivers/fpga/Kconfig | 2 +-
> drivers/fpga/intel-m10-bmc-sec-update.c | 364 +++++++++++++--------
> drivers/hwmon/Kconfig | 2 +-
> drivers/mfd/Kconfig | 32 +-
> drivers/mfd/Makefile | 5 +-
> drivers/mfd/intel-m10-bmc-core.c | 122 +++++++
> drivers/mfd/intel-m10-bmc-pmci.c | 219 +++++++++++++
> drivers/mfd/intel-m10-bmc-spi.c | 168 ++++++++++
> drivers/mfd/intel-m10-bmc.c | 238 --------------
> include/linux/mfd/intel-m10-bmc.h | 154 ++++++---
> 12 files changed, 888 insertions(+), 428 deletions(-)
> create mode 100644 drivers/mfd/intel-m10-bmc-core.c
> create mode 100644 drivers/mfd/intel-m10-bmc-pmci.c
> create mode 100644 drivers/mfd/intel-m10-bmc-spi.c
> delete mode 100644 drivers/mfd/intel-m10-bmc.c
>
> --
> Lee Jones [李琼斯]
New PR containing the final (11/11) patch.
Apologies for the oversight.
The following changes since commit 1b929c02afd37871d5afb9d498426f83432e71c2:
Linux 6.2-rc1 (2022-12-25 13:41:39 -0800)
are available in the Git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd.git tags/ib-mfd-fpga-hwmon-v6.3-1
for you to fetch changes up to acf63c458b55ecfb2015b33dd6ba3cc8fbc1c5d3:
fpga: m10bmc-sec: Add support for N6000 (2023-01-30 08:14:02 +0000)
----------------------------------------------------------------
Immutable branch between MFD, FPGA and HWMON due for the v6.3 merge window
----------------------------------------------------------------
Ilpo Järvinen (11):
mfd: intel-m10-bmc: Add missing includes to header
mfd: intel-m10-bmc: Create m10bmc_platform_info for type specific info
mfd: intel-m10-bmc: Rename the local variables
mfd: intel-m10-bmc: Split into core and spi specific parts
mfd: intel-m10-bmc: Support multiple CSR register layouts
fpga: intel-m10-bmc: Rework flash read/write
mfd: intel-m10-bmc: Prefix register defines with M10BMC_N3000
fpga: m10bmc-sec: Create helpers for rsu status/progress checks
fpga: m10bmc-sec: Make rsu status type specific
mfd: intel-m10-bmc: Add PMCI driver
fpga: m10bmc-sec: Add support for N6000
.../ABI/testing/sysfs-driver-intel-m10-bmc | 8 +-
MAINTAINERS | 2 +-
drivers/fpga/Kconfig | 2 +-
drivers/fpga/intel-m10-bmc-sec-update.c | 415 ++++++++++++-------
drivers/hwmon/Kconfig | 2 +-
drivers/mfd/Kconfig | 32 +-
drivers/mfd/Makefile | 5 +-
drivers/mfd/intel-m10-bmc-core.c | 122 ++++++
drivers/mfd/intel-m10-bmc-pmci.c | 455 +++++++++++++++++++++
drivers/mfd/intel-m10-bmc-spi.c | 168 ++++++++
drivers/mfd/intel-m10-bmc.c | 238 -----------
include/linux/mfd/intel-m10-bmc.h | 205 ++++++++--
12 files changed, 1221 insertions(+), 433 deletions(-)
create mode 100644 drivers/mfd/intel-m10-bmc-core.c
create mode 100644 drivers/mfd/intel-m10-bmc-pmci.c
create mode 100644 drivers/mfd/intel-m10-bmc-spi.c
delete mode 100644 drivers/mfd/intel-m10-bmc.c
--
Lee Jones [李琼斯]