Hello Kernel Hackers,
Some platforms such as s390 do not support PCI I/O spaces. On such platforms
I/O space accessors like inb()/outb() are stubs that can never actually work.
The way these stubs are implemented in asm-generic/io.h leads to compiler
warnings because any use will be a NULL pointer access on these platforms. In
a previous patch we tried handling this with a run-time warning on access. This
approach however was rejected by Linus[0] with the argument that this really
should be a compile-time check and, though a much more invasive change, we
believe that is indeed the right approach.
This patch series does exactly that by utilizing the HAS_IOPORT Kconfig option
introduced in v6.4-rc1 via the spun out first patch[1] of a previous version. With
the final patch of this series HAS_IOPORT=n means that inb()/outb() and friends
are not defined. This is also the same approach originally planned by Uwe
Kleine-König as mentioned in commit ce816fa88cca ("Kconfig: rename HAS_IOPORT
to HAS_IOPORT_MAP"). With the HAS_IOPORT Kconfig option merged already
per-subsystem patches can now also be merged independently and only the last
patch needs to wait.
This series builds heavily on an original patch for demonstating the concept by
Arnd Bergmann[2] and incoporates feedback of previous versions [3][4][5].
This version is based on v6.4-rc2 and is also available on my kernel.org tree
in the has_ioport_v4:
https://git.kernel.org/pub/scm/linux/kernel/git/niks/linux.git
Thanks,
Niklas Schnelle
Changes from v3:
- Rebased on v6.4-rc2 which includes the Kconfig HAS_IOPORT option
- Fixed some wrong #ifdef HAS_IOPORT to #ifdef CONFIG_HAS_IOPORT
- Split the usb subsystem patch into 3 parts (Arnd)
- Removed unneeded HAS_IOPORT dependency for SERIO_PARKBD (Geert Uytterhoeven)
- Removed no-op I/O access from FB_ATY (Ville Syrjälä)
- Simplified HAS_IOPORT dependencies for the sound subsystem (Takashi Iwai)
- Slightly reworded the subject line of the last patch which removes
the I/O port accessor functions.
Changes from RFC v2:
- Rebased on v6.3-rc1
- Fixed a NULL pointer dereference in set_io_from_upio() due to accidentially
expanded #ifdef CONFIG_SERIAL_8250_RT288X (kernel test robot)
- Dropped "ACPI: add dependency on HAS_IOPORT" (Bjorn Helgaas)
- Reworded commit message and moved ifdefs for "PCI/sysfs: Make I/O resource
depend on HAS_IOPORT" (Bjorn Helgaas)
- Instead of complete removal inb() etc. are marked with __compiletime_error()
when HAS_IOPORT is unset allowing for better error reporting (Ahmad Fatoum)
- Removed HAS_IOPORT dependency from PCMCIA as I/O port use is optional in at
least PC Card. Instead added HAS_IOPORT on a per driver basis. (Bjorn
Helgaas)
- Made uhci_has_pci_registers() constant 0 if HAS_IOPORT is not defined (Alan
Stern)
Changes from RFC v1:
- Completely dropped the LEGACY_PCI option and replaced its dependencies with
HAS_IOPORT as appropriate
- In the usb subsystem patch I incorporated the feedback from v1 by Alan Stern:
- Used a local macro to nop in*()/out*() in the helpers
- Removed an unnecessary further restriction on CONFIG_USB_UHCI_HCD
- Added a few more subsystems including wireless, ptp, and, mISDN that I had
previously missed due to a blanket !S390.
- Removed blanket !S390 dependencies where they are added due to the I/O port
problem
- In the sound system SND_OPL3_LIB needed to use "depends on" instead of
"select" because of its added HAS_IOPORT dependency
- In the drm subsystem the bochs driver gets #ifdefs instead of a blanket
dependency because its MMIO capable device variant should work without
HAS_IOPORT.
[0] https://lore.kernel.org/lkml/CAHk-=wg80je=K7madF4e7WrRNp37e3qh6y10Svhdc7O8SZ_-8g@mail.gmail.com/
[1] https://lore.kernel.org/lkml/[email protected]/
[2] https://lore.kernel.org/lkml/CAK8P3a0MNbx-iuzW_-=0ab6-TTZzwV-PT_6gAC1Gp5PgYyHcrA@mail.gmail.com/
[3] https://yhbt.net/lore/all/[email protected]/
[4] https://lore.kernel.org/all/[email protected]/
[5] https://lore.kernel.org/lkml/[email protected]/
Niklas Schnelle (41):
kgdb: add HAS_IOPORT dependency
ata: add HAS_IOPORT dependencies
char: impi, tpm: depend on HAS_IOPORT
comedi: add HAS_IOPORT dependencies
counter: add HAS_IOPORT dependencies
/dev/port: don't compile file operations without CONFIG_DEVPORT
drm: handle HAS_IOPORT dependencies
firmware: dmi-sysfs: handle HAS_IOPORT=n
gpio: add HAS_IOPORT dependencies
hwmon: add HAS_IOPORT dependencies
i2c: add HAS_IOPORT dependencies
iio: ad7606: Kconfig: add HAS_IOPORT dependencies
Input: add HAS_IOPORT dependencies
Input: gameport: add ISA and HAS_IOPORT dependencies
leds: add HAS_IOPORT dependencies
media: add HAS_IOPORT dependencies
misc: add HAS_IOPORT dependencies
mISDN: add HAS_IOPORT dependencies
mpt fusion: add HAS_IOPORT dependencies
net: handle HAS_IOPORT dependencies
parport: PC style parport depends on HAS_IOPORT
PCI: Make quirk using inw() depend on HAS_IOPORT
PCI/sysfs: Make I/O resource depend on HAS_IOPORT
pcmcia: add HAS_IOPORT dependencies
platform: add HAS_IOPORT dependencies
pnp: add HAS_IOPORT dependencies
power: add HAS_IOPORT dependencies
rtc: add HAS_IOPORT dependencies
scsi: add HAS_IOPORT dependencies
sound: add HAS_IOPORT dependencies
speakup: add HAS_IOPORT dependency for SPEAKUP_SERIALIO
staging: add HAS_IOPORT dependencies
tty: serial: handle HAS_IOPORT dependencies
usb: add HAS_IOPORT dependencies
usb: uhci: handle HAS_IOPORT dependencies
usb: pci-quirks: handle HAS_IOPORT dependencies
fbdev: atyfb: Remove unused clock determination
video: handle HAS_IOPORT dependencies
watchdog: add HAS_IOPORT dependencies
wireless: add HAS_IOPORT dependencies
asm-generic/io.h: Remove I/O port accessors for HAS_IOPORT=n
drivers/accessibility/speakup/Kconfig | 1 +
drivers/ata/Kconfig | 28 ++---
drivers/ata/ata_generic.c | 2 +
drivers/ata/libata-sff.c | 2 +
drivers/char/Kconfig | 3 +-
drivers/char/ipmi/Makefile | 11 +-
drivers/char/ipmi/ipmi_si_intf.c | 3 +-
drivers/char/ipmi/ipmi_si_pci.c | 3 +
drivers/char/mem.c | 6 +-
drivers/char/tpm/Kconfig | 1 +
drivers/char/tpm/tpm_infineon.c | 16 ++-
drivers/char/tpm/tpm_tis_core.c | 19 ++-
drivers/comedi/Kconfig | 103 +++++++++------
drivers/counter/Kconfig | 1 +
drivers/firmware/dmi-sysfs.c | 4 +
drivers/gpio/Kconfig | 26 ++--
drivers/gpu/drm/qxl/Kconfig | 1 +
drivers/gpu/drm/tiny/bochs.c | 17 +++
drivers/gpu/drm/tiny/cirrus.c | 2 +
drivers/hwmon/Kconfig | 21 +++-
drivers/i2c/busses/Kconfig | 31 ++---
drivers/iio/adc/Kconfig | 2 +-
drivers/input/gameport/Kconfig | 4 +-
drivers/input/serio/Kconfig | 1 +
drivers/input/touchscreen/Kconfig | 1 +
drivers/isdn/Kconfig | 1 -
drivers/isdn/hardware/mISDN/Kconfig | 12 +-
drivers/leds/Kconfig | 2 +-
drivers/media/pci/dm1105/Kconfig | 2 +-
drivers/media/radio/Kconfig | 14 ++-
drivers/media/rc/Kconfig | 6 +
drivers/message/fusion/Kconfig | 2 +-
drivers/misc/altera-stapl/Makefile | 3 +-
drivers/misc/altera-stapl/altera.c | 6 +-
drivers/net/Kconfig | 2 +-
drivers/net/arcnet/Kconfig | 2 +-
drivers/net/can/cc770/Kconfig | 1 +
drivers/net/can/sja1000/Kconfig | 1 +
drivers/net/ethernet/3com/Kconfig | 4 +-
drivers/net/ethernet/8390/Kconfig | 6 +-
drivers/net/ethernet/amd/Kconfig | 4 +-
drivers/net/ethernet/fujitsu/Kconfig | 2 +-
drivers/net/ethernet/intel/Kconfig | 2 +-
drivers/net/ethernet/sis/Kconfig | 4 +-
drivers/net/ethernet/smsc/Kconfig | 2 +-
drivers/net/ethernet/ti/Kconfig | 2 +-
drivers/net/ethernet/via/Kconfig | 1 +
drivers/net/ethernet/xircom/Kconfig | 2 +-
drivers/net/fddi/defxx.c | 2 +-
drivers/net/hamradio/Kconfig | 6 +-
drivers/net/wan/Kconfig | 2 +-
drivers/net/wireless/atmel/Kconfig | 2 +-
drivers/net/wireless/intersil/hostap/Kconfig | 2 +-
drivers/parport/Kconfig | 3 +-
drivers/pci/pci-sysfs.c | 4 +
drivers/pci/quirks.c | 2 +
drivers/pcmcia/Kconfig | 5 +-
drivers/platform/chrome/Kconfig | 1 +
drivers/platform/chrome/wilco_ec/Kconfig | 1 +
drivers/pnp/isapnp/Kconfig | 2 +-
drivers/power/reset/Kconfig | 1 +
drivers/rtc/Kconfig | 4 +-
drivers/scsi/Kconfig | 25 ++--
drivers/scsi/aic7xxx/Kconfig.aic79xx | 2 +-
drivers/scsi/aic7xxx/Kconfig.aic7xxx | 2 +-
drivers/scsi/aic94xx/Kconfig | 2 +-
drivers/scsi/megaraid/Kconfig.megaraid | 6 +-
drivers/scsi/mvsas/Kconfig | 2 +-
drivers/scsi/pcmcia/Kconfig | 6 +-
drivers/scsi/qla2xxx/Kconfig | 2 +-
drivers/staging/sm750fb/Kconfig | 2 +-
drivers/staging/vt6655/Kconfig | 2 +-
drivers/tty/Kconfig | 4 +-
drivers/tty/serial/8250/8250_early.c | 4 +
drivers/tty/serial/8250/8250_pci.c | 14 +++
drivers/tty/serial/8250/8250_port.c | 44 +++++--
drivers/tty/serial/8250/Kconfig | 5 +-
drivers/tty/serial/Kconfig | 2 +-
drivers/usb/Kconfig | 10 ++
drivers/usb/core/hcd-pci.c | 2 +
drivers/usb/host/Kconfig | 4 +-
drivers/usb/host/pci-quirks.c | 125 ++++++++++---------
drivers/usb/host/pci-quirks.h | 30 +++--
drivers/usb/host/uhci-hcd.c | 2 +-
drivers/usb/host/uhci-hcd.h | 36 ++++--
drivers/video/console/Kconfig | 1 +
drivers/video/fbdev/Kconfig | 21 ++--
drivers/video/fbdev/aty/atyfb_base.c | 5 -
drivers/watchdog/Kconfig | 6 +-
include/asm-generic/io.h | 60 +++++++++
include/linux/gameport.h | 9 +-
include/linux/libata.h | 2 +
include/linux/parport.h | 2 +-
include/video/vga.h | 8 ++
lib/Kconfig.kgdb | 1 +
net/ax25/Kconfig | 2 +-
sound/drivers/Kconfig | 3 +
sound/isa/Kconfig | 1 +
sound/pci/Kconfig | 45 +++++--
sound/pcmcia/Kconfig | 1 +
100 files changed, 631 insertions(+), 298 deletions(-)
base-commit: f1fcbaa18b28dec10281551dfe6ed3a3ed80e3d6
--
2.39.2
In the future inb() and friends will not be available when compiling
with CONFIG_HAS_IOPORT=n so we must only try to access them here if
CONFIG_DEVPORT is set which depends on HAS_IOPORT.
Co-developed-by: Arnd Bergmann <[email protected]>
Signed-off-by: Arnd Bergmann <[email protected]>
Signed-off-by: Niklas Schnelle <[email protected]>
---
Note: The HAS_IOPORT Kconfig option was added in v6.4-rc1 so
per-subsystem patches may be applied independently
drivers/char/mem.c | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
diff --git a/drivers/char/mem.c b/drivers/char/mem.c
index f494d31f2b98..e0c3a1b89b20 100644
--- a/drivers/char/mem.c
+++ b/drivers/char/mem.c
@@ -402,6 +402,7 @@ static int mmap_mem(struct file *file, struct vm_area_struct *vma)
return 0;
}
+#ifdef CONFIG_DEVPORT
static ssize_t read_port(struct file *file, char __user *buf,
size_t count, loff_t *ppos)
{
@@ -443,6 +444,7 @@ static ssize_t write_port(struct file *file, const char __user *buf,
*ppos = i;
return tmp-buf;
}
+#endif
static ssize_t read_null(struct file *file, char __user *buf,
size_t count, loff_t *ppos)
@@ -671,12 +673,14 @@ static const struct file_operations null_fops = {
.uring_cmd = uring_cmd_null,
};
-static const struct file_operations __maybe_unused port_fops = {
+#ifdef CONFIG_DEVPORT
+static const struct file_operations port_fops = {
.llseek = memory_lseek,
.read = read_port,
.write = write_port,
.open = open_port,
};
+#endif
static const struct file_operations zero_fops = {
.llseek = zero_lseek,
--
2.39.2
In a future patch HAS_IOPORT=n will result in inb()/outb() and friends
not being declared. As ISA already implies HAS_IOPORT we can simply add
this dependency and guard sections of code using inb()/outb() as
alternative access methods.
Co-developed-by: Arnd Bergmann <[email protected]>
Signed-off-by: Arnd Bergmann <[email protected]>
Signed-off-by: Niklas Schnelle <[email protected]>
---
Note: The HAS_IOPORT Kconfig option was added in v6.4-rc1 so
per-subsystem patches may be applied independently
drivers/input/gameport/Kconfig | 4 +++-
include/linux/gameport.h | 9 +++++++--
2 files changed, 10 insertions(+), 3 deletions(-)
diff --git a/drivers/input/gameport/Kconfig b/drivers/input/gameport/Kconfig
index 5a2c2fb3217d..fe73b26e647a 100644
--- a/drivers/input/gameport/Kconfig
+++ b/drivers/input/gameport/Kconfig
@@ -25,6 +25,7 @@ if GAMEPORT
config GAMEPORT_NS558
tristate "Classic ISA and PnP gameport support"
+ depends on ISA
help
Say Y here if you have an ISA or PnP gameport.
@@ -35,6 +36,7 @@ config GAMEPORT_NS558
config GAMEPORT_L4
tristate "PDPI Lightning 4 gamecard support"
+ depends on ISA
help
Say Y here if you have a PDPI Lightning 4 gamecard.
@@ -53,7 +55,7 @@ config GAMEPORT_EMU10K1
config GAMEPORT_FM801
tristate "ForteMedia FM801 gameport support"
- depends on PCI
+ depends on PCI && HAS_IOPORT
help
Say Y here if you have ForteMedia FM801 PCI audio controller
(Abit AU10, Genius Sound Maker, HP Workstation zx2000,
diff --git a/include/linux/gameport.h b/include/linux/gameport.h
index 8c2f00018e89..4d5720022b63 100644
--- a/include/linux/gameport.h
+++ b/include/linux/gameport.h
@@ -167,16 +167,21 @@ static inline void gameport_trigger(struct gameport *gameport)
{
if (gameport->trigger)
gameport->trigger(gameport);
+#ifdef CONFIG_HAS_IOPORT
else
outb(0xff, gameport->io);
+#endif
}
static inline unsigned char gameport_read(struct gameport *gameport)
{
if (gameport->read)
return gameport->read(gameport);
- else
- return inb(gameport->io);
+#ifdef CONFIG_HAS_IOPORT
+ return inb(gameport->io);
+#else
+ return 0xff;
+#endif
}
static inline int gameport_cooked_read(struct gameport *gameport, int *axes, int *buttons)
--
2.39.2
In a future patch HAS_IOPORT=n will result in inb()/outb() and friends
not being declared. We thus need to add HAS_IOPORT as dependency for
those drivers using them.
Co-developed-by: Arnd Bergmann <[email protected]>
Signed-off-by: Arnd Bergmann <[email protected]>
Signed-off-by: Niklas Schnelle <[email protected]>
---
Note: The HAS_IOPORT Kconfig option was added in v6.4-rc1 so
per-subsystem patches may be applied independently
drivers/misc/altera-stapl/Makefile | 3 ++-
drivers/misc/altera-stapl/altera.c | 6 +++++-
2 files changed, 7 insertions(+), 2 deletions(-)
diff --git a/drivers/misc/altera-stapl/Makefile b/drivers/misc/altera-stapl/Makefile
index dd0f8189666b..90f18e7bf9b0 100644
--- a/drivers/misc/altera-stapl/Makefile
+++ b/drivers/misc/altera-stapl/Makefile
@@ -1,4 +1,5 @@
# SPDX-License-Identifier: GPL-2.0-only
-altera-stapl-objs = altera-lpt.o altera-jtag.o altera-comp.o altera.o
+altera-stapl-y = altera-jtag.o altera-comp.o altera.o
+altera-stapl-$(CONFIG_HAS_IOPORT) += altera-lpt.o
obj-$(CONFIG_ALTERA_STAPL) += altera-stapl.o
diff --git a/drivers/misc/altera-stapl/altera.c b/drivers/misc/altera-stapl/altera.c
index a58b7cb81d98..587427b73914 100644
--- a/drivers/misc/altera-stapl/altera.c
+++ b/drivers/misc/altera-stapl/altera.c
@@ -2407,6 +2407,10 @@ int altera_init(struct altera_config *config, const struct firmware *fw)
astate->config = config;
if (!astate->config->jtag_io) {
+ if (!IS_ENABLED(CONFIG_HAS_IOPORT)) {
+ retval = -ENODEV;
+ goto free_state;
+ }
dprintk("%s: using byteblaster!\n", __func__);
astate->config->jtag_io = netup_jtag_io_lpt;
}
@@ -2481,7 +2485,7 @@ int altera_init(struct altera_config *config, const struct firmware *fw)
} else if (exec_result)
printk(KERN_ERR "%s: error %d\n", __func__, exec_result);
-
+free_state:
kfree(astate);
free_value:
kfree(value);
--
2.39.2
In a future patch HAS_IOPORT=n will result in inb()/outb() and friends
not being declared. We thus need to add HAS_IOPORT as dependency for
those drivers using them. In the bochs driver there is optional MMIO
support detected at runtime, warn if this isn't taken when
HAS_IOPORT is not defined.
There is also a direct and hard coded use in cirrus.c which according to
the comment is only necessary during resume. Let's just skip this as
for example s390 which doesn't have I/O port support also doesen't
support suspend/resume.
Co-developed-by: Arnd Bergmann <[email protected]>
Signed-off-by: Arnd Bergmann <[email protected]>
Signed-off-by: Niklas Schnelle <[email protected]>
---
Note: The HAS_IOPORT Kconfig option was added in v6.4-rc1 so
per-subsystem patches may be applied independently
drivers/gpu/drm/qxl/Kconfig | 1 +
drivers/gpu/drm/tiny/bochs.c | 17 +++++++++++++++++
drivers/gpu/drm/tiny/cirrus.c | 2 ++
3 files changed, 20 insertions(+)
diff --git a/drivers/gpu/drm/qxl/Kconfig b/drivers/gpu/drm/qxl/Kconfig
index ca3f51c2a8fe..d0e0d440c8d9 100644
--- a/drivers/gpu/drm/qxl/Kconfig
+++ b/drivers/gpu/drm/qxl/Kconfig
@@ -2,6 +2,7 @@
config DRM_QXL
tristate "QXL virtual GPU"
depends on DRM && PCI && MMU
+ depends on HAS_IOPORT
select DRM_KMS_HELPER
select DRM_TTM
select DRM_TTM_HELPER
diff --git a/drivers/gpu/drm/tiny/bochs.c b/drivers/gpu/drm/tiny/bochs.c
index d254679a136e..3710339407cc 100644
--- a/drivers/gpu/drm/tiny/bochs.c
+++ b/drivers/gpu/drm/tiny/bochs.c
@@ -2,6 +2,7 @@
#include <linux/module.h>
#include <linux/pci.h>
+#include <asm/bug.h>
#include <drm/drm_aperture.h>
#include <drm/drm_atomic_helper.h>
@@ -105,7 +106,9 @@ static void bochs_vga_writeb(struct bochs_device *bochs, u16 ioport, u8 val)
writeb(val, bochs->mmio + offset);
} else {
+#ifdef CONFIG_HAS_IOPORT
outb(val, ioport);
+#endif
}
}
@@ -119,7 +122,11 @@ static u8 bochs_vga_readb(struct bochs_device *bochs, u16 ioport)
return readb(bochs->mmio + offset);
} else {
+#ifdef CONFIG_HAS_IOPORT
return inb(ioport);
+#else
+ return 0xff;
+#endif
}
}
@@ -132,8 +139,12 @@ static u16 bochs_dispi_read(struct bochs_device *bochs, u16 reg)
ret = readw(bochs->mmio + offset);
} else {
+#ifdef CONFIG_HAS_IOPORT
outw(reg, VBE_DISPI_IOPORT_INDEX);
ret = inw(VBE_DISPI_IOPORT_DATA);
+#else
+ ret = 0xffff;
+#endif
}
return ret;
}
@@ -145,8 +156,10 @@ static void bochs_dispi_write(struct bochs_device *bochs, u16 reg, u16 val)
writew(val, bochs->mmio + offset);
} else {
+#ifdef CONFIG_HAS_IOPORT
outw(reg, VBE_DISPI_IOPORT_INDEX);
outw(val, VBE_DISPI_IOPORT_DATA);
+#endif
}
}
@@ -229,6 +242,10 @@ static int bochs_hw_init(struct drm_device *dev)
return -ENOMEM;
}
} else {
+ if (!IS_ENABLED(CONFIG_HAS_IOPORT)) {
+ DRM_ERROR("I/O ports are not supported\n");
+ return -EIO;
+ }
ioaddr = VBE_DISPI_IOPORT_INDEX;
iosize = 2;
if (!request_region(ioaddr, iosize, "bochs-drm")) {
diff --git a/drivers/gpu/drm/tiny/cirrus.c b/drivers/gpu/drm/tiny/cirrus.c
index 594bc472862f..c65fea049bc7 100644
--- a/drivers/gpu/drm/tiny/cirrus.c
+++ b/drivers/gpu/drm/tiny/cirrus.c
@@ -508,8 +508,10 @@ static void cirrus_crtc_helper_atomic_enable(struct drm_crtc *crtc,
cirrus_mode_set(cirrus, &crtc_state->mode);
+#ifdef CONFIG_HAS_IOPORT
/* Unblank (needed on S3 resume, vgabios doesn't do it then) */
outb(VGA_AR_ENABLE_DISPLAY, VGA_ATT_W);
+#endif
drm_dev_exit(idx);
}
--
2.39.2
If legacy I/O spaces are not supported simply return an error when
trying to access them via pci_resource_io(). This allows inb() and
friends to become undefined when they are known at compile time to be
non-functional in a later patch.
Co-developed-by: Arnd Bergmann <[email protected]>
Signed-off-by: Arnd Bergmann <[email protected]>
Acked-by: Bjorn Helgaas <[email protected]>
Signed-off-by: Niklas Schnelle <[email protected]>
---
Note: The HAS_IOPORT Kconfig option was added in v6.4-rc1 so
per-subsystem patches may be applied independently
drivers/pci/pci-sysfs.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/drivers/pci/pci-sysfs.c b/drivers/pci/pci-sysfs.c
index ab32a91f287b..d9eede2dbc0e 100644
--- a/drivers/pci/pci-sysfs.c
+++ b/drivers/pci/pci-sysfs.c
@@ -1083,6 +1083,7 @@ static ssize_t pci_resource_io(struct file *filp, struct kobject *kobj,
struct bin_attribute *attr, char *buf,
loff_t off, size_t count, bool write)
{
+#ifdef CONFIG_HAS_IOPORT
struct pci_dev *pdev = to_pci_dev(kobj_to_dev(kobj));
int bar = (unsigned long)attr->private;
unsigned long port = off;
@@ -1116,6 +1117,9 @@ static ssize_t pci_resource_io(struct file *filp, struct kobject *kobj,
return 4;
}
return -EINVAL;
+#else
+ return -ENXIO;
+#endif
}
static ssize_t pci_read_resource_io(struct file *filp, struct kobject *kobj,
--
2.39.2
In a future patch HAS_IOPORT=n will result in inb()/outb() and friends
not being declared. We thus need to guard sections of code calling them
as alternative access methods.
Co-developed-by: Arnd Bergmann <[email protected]>
Signed-off-by: Arnd Bergmann <[email protected]>
Signed-off-by: Niklas Schnelle <[email protected]>
---
Note: The HAS_IOPORT Kconfig option was added in v6.4-rc1 so
per-subsystem patches may be applied independently
drivers/firmware/dmi-sysfs.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/drivers/firmware/dmi-sysfs.c b/drivers/firmware/dmi-sysfs.c
index 03708ab64e56..8d91997036e4 100644
--- a/drivers/firmware/dmi-sysfs.c
+++ b/drivers/firmware/dmi-sysfs.c
@@ -310,6 +310,7 @@ static const struct kobj_type dmi_system_event_log_ktype = {
.default_groups = dmi_sysfs_sel_groups,
};
+#ifdef CONFIG_HAS_IOPORT
typedef u8 (*sel_io_reader)(const struct dmi_system_event_log *sel,
loff_t offset);
@@ -374,6 +375,7 @@ static ssize_t dmi_sel_raw_read_io(struct dmi_sysfs_entry *entry,
return wrote;
}
+#endif
static ssize_t dmi_sel_raw_read_phys32(struct dmi_sysfs_entry *entry,
const struct dmi_system_event_log *sel,
@@ -409,11 +411,13 @@ static ssize_t dmi_sel_raw_read_helper(struct dmi_sysfs_entry *entry,
memcpy(&sel, dh, sizeof(sel));
switch (sel.access_method) {
+#ifdef CONFIG_HAS_IOPORT
case DMI_SEL_ACCESS_METHOD_IO8:
case DMI_SEL_ACCESS_METHOD_IO2x8:
case DMI_SEL_ACCESS_METHOD_IO16:
return dmi_sel_raw_read_io(entry, &sel, state->buf,
state->pos, state->count);
+#endif
case DMI_SEL_ACCESS_METHOD_PHYS32:
return dmi_sel_raw_read_phys32(entry, &sel, state->buf,
state->pos, state->count);
--
2.39.2
In a future patch HAS_IOPORT=n will result in inb()/outb() and friends
not being declared. We thus need to add this dependency and ifdef
sections of code using inb()/outb() as alternative access methods.
Co-developed-by: Arnd Bergmann <[email protected]>
Signed-off-by: Arnd Bergmann <[email protected]>
Acked-by: Corey Minyard <[email protected]> # IPMI
Reviewed-by: Jarkko Sakkinen <[email protected]>
Signed-off-by: Niklas Schnelle <[email protected]>
---
Note: The HAS_IOPORT Kconfig option was added in v6.4-rc1 so
per-subsystem patches may be applied independently
drivers/char/Kconfig | 3 ++-
drivers/char/ipmi/Makefile | 11 ++++-------
drivers/char/ipmi/ipmi_si_intf.c | 3 ++-
drivers/char/ipmi/ipmi_si_pci.c | 3 +++
drivers/char/tpm/Kconfig | 1 +
drivers/char/tpm/tpm_infineon.c | 16 ++++++++++++----
drivers/char/tpm/tpm_tis_core.c | 19 ++++++++-----------
7 files changed, 32 insertions(+), 24 deletions(-)
diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig
index 801d6c83f896..625af75833fc 100644
--- a/drivers/char/Kconfig
+++ b/drivers/char/Kconfig
@@ -34,6 +34,7 @@ config TTY_PRINTK_LEVEL
config PRINTER
tristate "Parallel printer support"
depends on PARPORT
+ depends on HAS_IOPORT || PARPORT_NOT_PC
help
If you intend to attach a printer to the parallel port of your Linux
box (as opposed to using a serial printer; if the connector at the
@@ -340,7 +341,7 @@ config NVRAM
config DEVPORT
bool "/dev/port character device"
- depends on ISA || PCI
+ depends on HAS_IOPORT
default y
help
Say Y here if you want to support the /dev/port device. The /dev/port
diff --git a/drivers/char/ipmi/Makefile b/drivers/char/ipmi/Makefile
index cb6138b8ded9..e0944547c9d0 100644
--- a/drivers/char/ipmi/Makefile
+++ b/drivers/char/ipmi/Makefile
@@ -5,13 +5,10 @@
ipmi_si-y := ipmi_si_intf.o ipmi_kcs_sm.o ipmi_smic_sm.o ipmi_bt_sm.o \
ipmi_si_hotmod.o ipmi_si_hardcode.o ipmi_si_platform.o \
- ipmi_si_port_io.o ipmi_si_mem_io.o
-ifdef CONFIG_PCI
-ipmi_si-y += ipmi_si_pci.o
-endif
-ifdef CONFIG_PARISC
-ipmi_si-y += ipmi_si_parisc.o
-endif
+ ipmi_si_mem_io.o
+ipmi_si-$(CONFIG_HAS_IOPORT) += ipmi_si_port_io.o
+ipmi_si-$(CONFIG_PCI) += ipmi_si_pci.o
+ipmi_si-$(CONFIG_PARISC) += ipmi_si_parisc.o
obj-$(CONFIG_IPMI_HANDLER) += ipmi_msghandler.o
obj-$(CONFIG_IPMI_DEVICE_INTERFACE) += ipmi_devintf.o
diff --git a/drivers/char/ipmi/ipmi_si_intf.c b/drivers/char/ipmi/ipmi_si_intf.c
index abddd7e43a9a..edbbdb804913 100644
--- a/drivers/char/ipmi/ipmi_si_intf.c
+++ b/drivers/char/ipmi/ipmi_si_intf.c
@@ -1882,7 +1882,8 @@ int ipmi_si_add_smi(struct si_sm_io *io)
}
if (!io->io_setup) {
- if (io->addr_space == IPMI_IO_ADDR_SPACE) {
+ if (IS_ENABLED(CONFIG_HAS_IOPORT) &&
+ io->addr_space == IPMI_IO_ADDR_SPACE) {
io->io_setup = ipmi_si_port_setup;
} else if (io->addr_space == IPMI_MEM_ADDR_SPACE) {
io->io_setup = ipmi_si_mem_setup;
diff --git a/drivers/char/ipmi/ipmi_si_pci.c b/drivers/char/ipmi/ipmi_si_pci.c
index 74fa2055868b..b83d55685b22 100644
--- a/drivers/char/ipmi/ipmi_si_pci.c
+++ b/drivers/char/ipmi/ipmi_si_pci.c
@@ -97,6 +97,9 @@ static int ipmi_pci_probe(struct pci_dev *pdev,
}
if (pci_resource_flags(pdev, 0) & IORESOURCE_IO) {
+ if (!IS_ENABLED(CONFIG_HAS_IOPORT))
+ return -ENXIO;
+
io.addr_space = IPMI_IO_ADDR_SPACE;
io.io_setup = ipmi_si_port_setup;
} else {
diff --git a/drivers/char/tpm/Kconfig b/drivers/char/tpm/Kconfig
index 927088b2c3d3..418c9ed59ffd 100644
--- a/drivers/char/tpm/Kconfig
+++ b/drivers/char/tpm/Kconfig
@@ -149,6 +149,7 @@ config TCG_NSC
config TCG_ATMEL
tristate "Atmel TPM Interface"
depends on PPC64 || HAS_IOPORT_MAP
+ depends on HAS_IOPORT
help
If you have a TPM security chip from Atmel say Yes and it
will be accessible from within Linux. To compile this driver
diff --git a/drivers/char/tpm/tpm_infineon.c b/drivers/char/tpm/tpm_infineon.c
index 9c924a1440a9..99c6e565ec8d 100644
--- a/drivers/char/tpm/tpm_infineon.c
+++ b/drivers/char/tpm/tpm_infineon.c
@@ -26,7 +26,9 @@
#define TPM_MAX_TRIES 5000
#define TPM_INFINEON_DEV_VEN_VALUE 0x15D1
+#ifdef CONFIG_HAS_IOPORT
#define TPM_INF_IO_PORT 0x0
+#endif
#define TPM_INF_IO_MEM 0x1
#define TPM_INF_ADDR 0x0
@@ -51,34 +53,40 @@ static struct tpm_inf_dev tpm_dev;
static inline void tpm_data_out(unsigned char data, unsigned char offset)
{
+#ifdef CONFIG_HAS_IOPORT
if (tpm_dev.iotype == TPM_INF_IO_PORT)
outb(data, tpm_dev.data_regs + offset);
else
+#endif
writeb(data, tpm_dev.mem_base + tpm_dev.data_regs + offset);
}
static inline unsigned char tpm_data_in(unsigned char offset)
{
+#ifdef CONFIG_HAS_IOPORT
if (tpm_dev.iotype == TPM_INF_IO_PORT)
return inb(tpm_dev.data_regs + offset);
- else
- return readb(tpm_dev.mem_base + tpm_dev.data_regs + offset);
+#endif
+ return readb(tpm_dev.mem_base + tpm_dev.data_regs + offset);
}
static inline void tpm_config_out(unsigned char data, unsigned char offset)
{
+#ifdef CONFIG_HAS_IOPORT
if (tpm_dev.iotype == TPM_INF_IO_PORT)
outb(data, tpm_dev.config_port + offset);
else
+#endif
writeb(data, tpm_dev.mem_base + tpm_dev.index_off + offset);
}
static inline unsigned char tpm_config_in(unsigned char offset)
{
+#ifdef CONFIG_HAS_IOPORT
if (tpm_dev.iotype == TPM_INF_IO_PORT)
return inb(tpm_dev.config_port + offset);
- else
- return readb(tpm_dev.mem_base + tpm_dev.index_off + offset);
+#endif
+ return readb(tpm_dev.mem_base + tpm_dev.index_off + offset);
}
/* TPM header definitions */
diff --git a/drivers/char/tpm/tpm_tis_core.c b/drivers/char/tpm/tpm_tis_core.c
index 02945d53fcef..b5a5c3d44dec 100644
--- a/drivers/char/tpm/tpm_tis_core.c
+++ b/drivers/char/tpm/tpm_tis_core.c
@@ -954,11 +954,6 @@ static void tpm_tis_clkrun_enable(struct tpm_chip *chip, bool value)
clkrun_val &= ~LPC_CLKRUN_EN;
iowrite32(clkrun_val, data->ilb_base_addr + LPC_CNTRL_OFFSET);
- /*
- * Write any random value on port 0x80 which is on LPC, to make
- * sure LPC clock is running before sending any TPM command.
- */
- outb(0xCC, 0x80);
} else {
data->clkrun_enabled--;
if (data->clkrun_enabled)
@@ -969,13 +964,15 @@ static void tpm_tis_clkrun_enable(struct tpm_chip *chip, bool value)
/* Enable LPC CLKRUN# */
clkrun_val |= LPC_CLKRUN_EN;
iowrite32(clkrun_val, data->ilb_base_addr + LPC_CNTRL_OFFSET);
-
- /*
- * Write any random value on port 0x80 which is on LPC, to make
- * sure LPC clock is running before sending any TPM command.
- */
- outb(0xCC, 0x80);
}
+
+#ifdef CONFIG_HAS_IOPORT
+ /*
+ * Write any random value on port 0x80 which is on LPC, to make
+ * sure LPC clock is running before sending any TPM command.
+ */
+ outb(0xCC, 0x80);
+#endif
}
static const struct tpm_class_ops tpm_tis = {
--
2.39.2
In a future patch HAS_IOPORT=n will result in inb()/outb() and friends
not being declared. We thus need to add HAS_IOPORT as dependency for
those drivers using them.
Co-developed-by: Arnd Bergmann <[email protected]>
Signed-off-by: Arnd Bergmann <[email protected]>
Signed-off-by: Niklas Schnelle <[email protected]>
---
Note: The HAS_IOPORT Kconfig option was added in v6.4-rc1 so
per-subsystem patches may be applied independently
drivers/staging/sm750fb/Kconfig | 2 +-
drivers/staging/vt6655/Kconfig | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/staging/sm750fb/Kconfig b/drivers/staging/sm750fb/Kconfig
index 1461c89701c3..ab3d9b057d56 100644
--- a/drivers/staging/sm750fb/Kconfig
+++ b/drivers/staging/sm750fb/Kconfig
@@ -1,7 +1,7 @@
# SPDX-License-Identifier: GPL-2.0
config FB_SM750
tristate "Silicon Motion SM750 framebuffer support"
- depends on FB && PCI
+ depends on FB && PCI && HAS_IOPORT
select FB_MODE_HELPERS
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
diff --git a/drivers/staging/vt6655/Kconfig b/drivers/staging/vt6655/Kconfig
index d1cd5de46dcf..077f62ebe80c 100644
--- a/drivers/staging/vt6655/Kconfig
+++ b/drivers/staging/vt6655/Kconfig
@@ -1,6 +1,6 @@
# SPDX-License-Identifier: GPL-2.0
config VT6655
tristate "VIA Technologies VT6655 support"
- depends on PCI && MAC80211 && m
+ depends on PCI && HAS_IOPORT && MAC80211 && m
help
This is a vendor-written driver for VIA VT6655.
--
2.39.2
In a future patch HAS_IOPORT=n will result in inb()/outb() and friends
not being declared. We thus need to add HAS_IOPORT as dependency for
those drivers using them.
Co-developed-by: Arnd Bergmann <[email protected]>
Signed-off-by: Arnd Bergmann <[email protected]>
Acked-by: Damien Le Moal <[email protected]>
Signed-off-by: Niklas Schnelle <[email protected]>
---
Note: The HAS_IOPORT Kconfig option was added in v6.4-rc1 so
per-subsystem patches may be applied independently
drivers/ata/Kconfig | 28 ++++++++++++++--------------
drivers/ata/ata_generic.c | 2 ++
drivers/ata/libata-sff.c | 2 ++
include/linux/libata.h | 2 ++
4 files changed, 20 insertions(+), 14 deletions(-)
diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
index 42b51c9812a0..c521cdc51f8c 100644
--- a/drivers/ata/Kconfig
+++ b/drivers/ata/Kconfig
@@ -557,7 +557,7 @@ comment "PATA SFF controllers with BMDMA"
config PATA_ALI
tristate "ALi PATA support"
- depends on PCI
+ depends on PCI && HAS_IOPORT
select PATA_TIMINGS
help
This option enables support for the ALi ATA interfaces
@@ -567,7 +567,7 @@ config PATA_ALI
config PATA_AMD
tristate "AMD/NVidia PATA support"
- depends on PCI
+ depends on PCI && HAS_IOPORT
select PATA_TIMINGS
help
This option enables support for the AMD and NVidia PATA
@@ -585,7 +585,7 @@ config PATA_ARASAN_CF
config PATA_ARTOP
tristate "ARTOP 6210/6260 PATA support"
- depends on PCI
+ depends on PCI && HAS_IOPORT
help
This option enables support for ARTOP PATA controllers.
@@ -612,7 +612,7 @@ config PATA_ATP867X
config PATA_CMD64X
tristate "CMD64x PATA support"
- depends on PCI
+ depends on PCI && HAS_IOPORT
select PATA_TIMINGS
help
This option enables support for the CMD64x series chips
@@ -659,7 +659,7 @@ config PATA_CS5536
config PATA_CYPRESS
tristate "Cypress CY82C693 PATA support (Very Experimental)"
- depends on PCI
+ depends on PCI && HAS_IOPORT
select PATA_TIMINGS
help
This option enables support for the Cypress/Contaq CY82C693
@@ -707,7 +707,7 @@ config PATA_HPT366
config PATA_HPT37X
tristate "HPT 370/370A/371/372/374/302 PATA support"
- depends on PCI
+ depends on PCI && HAS_IOPORT
help
This option enables support for the majority of the later HPT
PATA controllers via the new ATA layer.
@@ -716,7 +716,7 @@ config PATA_HPT37X
config PATA_HPT3X2N
tristate "HPT 371N/372N/302N PATA support"
- depends on PCI
+ depends on PCI && HAS_IOPORT
help
This option enables support for the N variant HPT PATA
controllers via the new ATA layer.
@@ -819,7 +819,7 @@ config PATA_MPC52xx
config PATA_NETCELL
tristate "NETCELL Revolution RAID support"
- depends on PCI
+ depends on PCI && HAS_IOPORT
help
This option enables support for the Netcell Revolution RAID
PATA controller.
@@ -855,7 +855,7 @@ config PATA_OLDPIIX
config PATA_OPTIDMA
tristate "OPTI FireStar PATA support (Very Experimental)"
- depends on PCI
+ depends on PCI && HAS_IOPORT
help
This option enables DMA/PIO support for the later OPTi
controllers found on some old motherboards and in some
@@ -865,7 +865,7 @@ config PATA_OPTIDMA
config PATA_PDC2027X
tristate "Promise PATA 2027x support"
- depends on PCI
+ depends on PCI && HAS_IOPORT
help
This option enables support for Promise PATA pdc20268 to pdc20277 host adapters.
@@ -873,7 +873,7 @@ config PATA_PDC2027X
config PATA_PDC_OLD
tristate "Older Promise PATA controller support"
- depends on PCI
+ depends on PCI && HAS_IOPORT
help
This option enables support for the Promise 20246, 20262, 20263,
20265 and 20267 adapters.
@@ -901,7 +901,7 @@ config PATA_RDC
config PATA_SC1200
tristate "SC1200 PATA support"
- depends on PCI && (X86_32 || COMPILE_TEST)
+ depends on PCI && (X86_32 || COMPILE_TEST) && HAS_IOPORT
help
This option enables support for the NatSemi/AMD SC1200 SoC
companion chip used with the Geode processor family.
@@ -919,7 +919,7 @@ config PATA_SCH
config PATA_SERVERWORKS
tristate "SERVERWORKS OSB4/CSB5/CSB6/HT1000 PATA support"
- depends on PCI
+ depends on PCI && HAS_IOPORT
help
This option enables support for the Serverworks OSB4/CSB5/CSB6 and
HT1000 PATA controllers, via the new ATA layer.
@@ -1183,7 +1183,7 @@ config ATA_GENERIC
config PATA_LEGACY
tristate "Legacy ISA PATA support (Experimental)"
- depends on (ISA || PCI)
+ depends on (ISA || PCI) && HAS_IOPORT
select PATA_TIMINGS
help
This option enables support for ISA/VLB/PCI bus legacy PATA
diff --git a/drivers/ata/ata_generic.c b/drivers/ata/ata_generic.c
index 2f57ec00ab82..2d391d117f74 100644
--- a/drivers/ata/ata_generic.c
+++ b/drivers/ata/ata_generic.c
@@ -197,8 +197,10 @@ static int ata_generic_init_one(struct pci_dev *dev, const struct pci_device_id
if (!(command & PCI_COMMAND_IO))
return -ENODEV;
+#ifdef CONFIG_PATA_ALI
if (dev->vendor == PCI_VENDOR_ID_AL)
ata_pci_bmdma_clear_simplex(dev);
+#endif /* CONFIG_PATA_ALI */
if (dev->vendor == PCI_VENDOR_ID_ATI) {
int rc = pcim_enable_device(dev);
diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c
index 9d28badfe41d..80137edb7ebf 100644
--- a/drivers/ata/libata-sff.c
+++ b/drivers/ata/libata-sff.c
@@ -3031,6 +3031,7 @@ EXPORT_SYMBOL_GPL(ata_bmdma_port_start32);
#ifdef CONFIG_PCI
+#ifdef CONFIG_HAS_IOPORT
/**
* ata_pci_bmdma_clear_simplex - attempt to kick device out of simplex
* @pdev: PCI device
@@ -3056,6 +3057,7 @@ int ata_pci_bmdma_clear_simplex(struct pci_dev *pdev)
return 0;
}
EXPORT_SYMBOL_GPL(ata_pci_bmdma_clear_simplex);
+#endif /* CONFIG_HAS_IOPORT */
static void ata_bmdma_nodma(struct ata_host *host, const char *reason)
{
diff --git a/include/linux/libata.h b/include/linux/libata.h
index 311cd93377c7..90002d4a785b 100644
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -2012,7 +2012,9 @@ extern int ata_bmdma_port_start(struct ata_port *ap);
extern int ata_bmdma_port_start32(struct ata_port *ap);
#ifdef CONFIG_PCI
+#ifdef CONFIG_HAS_IOPORT
extern int ata_pci_bmdma_clear_simplex(struct pci_dev *pdev);
+#endif /* CONFIG_HAS_IOPORT */
extern void ata_pci_bmdma_init(struct ata_host *host);
extern int ata_pci_bmdma_prepare_host(struct pci_dev *pdev,
const struct ata_port_info * const * ppi,
--
2.39.2
In a future patch HAS_IOPORT=n will result in inb()/outb() and friends
not being declared. We thus need to add HAS_IOPORT as dependency for
those drivers using them.
Co-developed-by: Arnd Bergmann <[email protected]>
Signed-off-by: Arnd Bergmann <[email protected]>
Acked-by: Guenter Roeck <[email protected]>
Signed-off-by: Niklas Schnelle <[email protected]>
---
Note: The HAS_IOPORT Kconfig option was added in v6.4-rc1 so
per-subsystem patches may be applied independently
drivers/watchdog/Kconfig | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index f22138709bf5..affe25b96cfe 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -453,6 +453,7 @@ config 21285_WATCHDOG
config 977_WATCHDOG
tristate "NetWinder WB83C977 watchdog"
depends on (FOOTBRIDGE && ARCH_NETWINDER) || (ARM && COMPILE_TEST)
+ depends on HAS_IOPORT
help
Say Y here to include support for the WB977 watchdog included in
NetWinder machines. Alternatively say M to compile the driver as
@@ -1271,6 +1272,7 @@ config ITCO_WDT
select WATCHDOG_CORE
depends on I2C || I2C=n
depends on MFD_INTEL_PMC_BXT || !MFD_INTEL_PMC_BXT
+ depends on HAS_IOPORT # for I2C_I801
select LPC_ICH if !EXPERT
select I2C_I801 if !EXPERT && I2C
help
@@ -2159,7 +2161,7 @@ comment "PCI-based Watchdog Cards"
config PCIPCWATCHDOG
tristate "Berkshire Products PCI-PC Watchdog"
- depends on PCI
+ depends on PCI && HAS_IOPORT
help
This is the driver for the Berkshire Products PCI-PC Watchdog card.
This card simply watches your kernel to make sure it doesn't freeze,
@@ -2174,7 +2176,7 @@ config PCIPCWATCHDOG
config WDTPCI
tristate "PCI-WDT500/501 Watchdog timer"
- depends on PCI
+ depends on PCI && HAS_IOPORT
help
If you have a PCI-WDT500/501 watchdog board, say Y here, otherwise N.
--
2.39.2
In a future patch HAS_IOPORT=n will result in inb()/outb() and friends
not being declared. We thus need to depend on HAS_IOPORT even when
compile testing only.
Co-developed-by: Arnd Bergmann <[email protected]>
Signed-off-by: Arnd Bergmann <[email protected]>
Signed-off-by: Niklas Schnelle <[email protected]>
---
Note: The HAS_IOPORT Kconfig option was added in v6.4-rc1 so
per-subsystem patches may be applied independently
drivers/pnp/isapnp/Kconfig | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/pnp/isapnp/Kconfig b/drivers/pnp/isapnp/Kconfig
index d0479a563123..79bd48f1dd94 100644
--- a/drivers/pnp/isapnp/Kconfig
+++ b/drivers/pnp/isapnp/Kconfig
@@ -4,7 +4,7 @@
#
config ISAPNP
bool "ISA Plug and Play support"
- depends on ISA || COMPILE_TEST
+ depends on ISA || (HAS_IOPORT && COMPILE_TEST)
help
Say Y here if you would like support for ISA Plug and Play devices.
Some information is in <file:Documentation/driver-api/isapnp.rst>.
--
2.39.2
In a future patch HAS_IOPORT=n will result in inb()/outb() and friends
not being declared. We thus need to add HAS_IOPORT as dependency for
those drivers using them.
Co-developed-by: Arnd Bergmann <[email protected]>
Signed-off-by: Arnd Bergmann <[email protected]>
Signed-off-by: Niklas Schnelle <[email protected]>
---
Note: The HAS_IOPORT Kconfig option was added in v6.4-rc1 so
per-subsystem patches may be applied independently
drivers/scsi/Kconfig | 25 +++++++++++++------------
drivers/scsi/aic7xxx/Kconfig.aic79xx | 2 +-
drivers/scsi/aic7xxx/Kconfig.aic7xxx | 2 +-
drivers/scsi/aic94xx/Kconfig | 2 +-
drivers/scsi/megaraid/Kconfig.megaraid | 6 +++---
drivers/scsi/mvsas/Kconfig | 2 +-
drivers/scsi/pcmcia/Kconfig | 6 +++++-
drivers/scsi/qla2xxx/Kconfig | 2 +-
8 files changed, 26 insertions(+), 21 deletions(-)
diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig
index 0704809d9d99..4962ce989113 100644
--- a/drivers/scsi/Kconfig
+++ b/drivers/scsi/Kconfig
@@ -334,7 +334,7 @@ config SGIWD93_SCSI
config BLK_DEV_3W_XXXX_RAID
tristate "3ware 5/6/7/8xxx ATA-RAID support"
- depends on PCI && SCSI
+ depends on PCI && HAS_IOPORT && SCSI
help
3ware is the only hardware ATA-Raid product in Linux to date.
This card is 2,4, or 8 channel master mode support only.
@@ -381,7 +381,7 @@ config SCSI_3W_SAS
config SCSI_ACARD
tristate "ACARD SCSI support"
- depends on PCI && SCSI
+ depends on PCI && HAS_IOPORT && SCSI
help
This driver supports the ACARD SCSI host adapter.
Support Chip <ATP870 ATP876 ATP880 ATP885>
@@ -462,7 +462,7 @@ config SCSI_MVUMI
config SCSI_ADVANSYS
tristate "AdvanSys SCSI support"
depends on SCSI
- depends on ISA || EISA || PCI
+ depends on (ISA || EISA || PCI) && HAS_IOPORT
depends on ISA_DMA_API || !ISA
help
This is a driver for all SCSI host adapters manufactured by
@@ -503,7 +503,7 @@ config SCSI_HPTIOP
config SCSI_BUSLOGIC
tristate "BusLogic SCSI support"
- depends on PCI && SCSI
+ depends on SCSI && PCI && HAS_IOPORT
help
This is support for BusLogic MultiMaster and FlashPoint SCSI Host
Adapters. Consult the SCSI-HOWTO, available from
@@ -518,7 +518,7 @@ config SCSI_BUSLOGIC
config SCSI_FLASHPOINT
bool "FlashPoint support"
- depends on SCSI_BUSLOGIC && PCI
+ depends on SCSI_BUSLOGIC && PCI && HAS_IOPORT
help
This option allows you to add FlashPoint support to the
BusLogic SCSI driver. The FlashPoint SCCB Manager code is
@@ -632,7 +632,7 @@ config SCSI_SNIC_DEBUG_FS
config SCSI_DMX3191D
tristate "DMX3191D SCSI support"
- depends on PCI && SCSI
+ depends on PCI && HAS_IOPORT && SCSI
select SCSI_SPI_ATTRS
help
This is support for Domex DMX3191D SCSI Host Adapters.
@@ -646,7 +646,7 @@ config SCSI_FDOMAIN
config SCSI_FDOMAIN_PCI
tristate "Future Domain TMC-3260/AHA-2920A PCI SCSI support"
- depends on PCI && SCSI
+ depends on PCI && HAS_IOPORT && SCSI
select SCSI_FDOMAIN
help
This is support for Future Domain's PCI SCSI host adapters (TMC-3260)
@@ -699,7 +699,7 @@ config SCSI_GENERIC_NCR5380
config SCSI_IPS
tristate "IBM ServeRAID support"
- depends on PCI && SCSI
+ depends on PCI && HAS_IOPORT && SCSI
help
This is support for the IBM ServeRAID hardware RAID controllers.
See <http://www.developer.ibm.com/welcome/netfinity/serveraid.html>
@@ -759,7 +759,7 @@ config SCSI_IBMVFC_TRACE
config SCSI_INITIO
tristate "Initio 9100U(W) support"
- depends on PCI && SCSI
+ depends on PCI && HAS_IOPORT && SCSI
help
This is support for the Initio 91XXU(W) SCSI host adapter. Please
read the SCSI-HOWTO, available from
@@ -770,7 +770,7 @@ config SCSI_INITIO
config SCSI_INIA100
tristate "Initio INI-A100U2W support"
- depends on PCI && SCSI
+ depends on PCI && HAS_IOPORT && SCSI
help
This is support for the Initio INI-A100U2W SCSI host adapter.
Please read the SCSI-HOWTO, available from
@@ -782,6 +782,7 @@ config SCSI_INIA100
config SCSI_PPA
tristate "IOMEGA parallel port (ppa - older drives)"
depends on SCSI && PARPORT_PC
+ depends on HAS_IOPORT
help
This driver supports older versions of IOMEGA's parallel port ZIP
drive (a 100 MB removable media device).
@@ -1175,7 +1176,7 @@ config SCSI_SIM710
config SCSI_DC395x
tristate "Tekram DC395(U/UW/F) and DC315(U) SCSI support"
- depends on PCI && SCSI
+ depends on PCI && HAS_IOPORT && SCSI
select SCSI_SPI_ATTRS
help
This driver supports PCI SCSI host adapters based on the ASIC
@@ -1207,7 +1208,7 @@ config SCSI_AM53C974
config SCSI_NSP32
tristate "Workbit NinjaSCSI-32Bi/UDE support"
- depends on PCI && SCSI && !64BIT
+ depends on PCI && SCSI && !64BIT && HAS_IOPORT
help
This is support for the Workbit NinjaSCSI-32Bi/UDE PCI/Cardbus
SCSI host adapter. Please read the SCSI-HOWTO, available from
diff --git a/drivers/scsi/aic7xxx/Kconfig.aic79xx b/drivers/scsi/aic7xxx/Kconfig.aic79xx
index a47dbd500e9a..4bc53eec4c83 100644
--- a/drivers/scsi/aic7xxx/Kconfig.aic79xx
+++ b/drivers/scsi/aic7xxx/Kconfig.aic79xx
@@ -5,7 +5,7 @@
#
config SCSI_AIC79XX
tristate "Adaptec AIC79xx U320 support"
- depends on PCI && SCSI
+ depends on PCI && HAS_IOPORT && SCSI
select SCSI_SPI_ATTRS
help
This driver supports all of Adaptec's Ultra 320 PCI-X
diff --git a/drivers/scsi/aic7xxx/Kconfig.aic7xxx b/drivers/scsi/aic7xxx/Kconfig.aic7xxx
index 0cfd92ce750a..f0425145a5f4 100644
--- a/drivers/scsi/aic7xxx/Kconfig.aic7xxx
+++ b/drivers/scsi/aic7xxx/Kconfig.aic7xxx
@@ -5,7 +5,7 @@
#
config SCSI_AIC7XXX
tristate "Adaptec AIC7xxx Fast -> U160 support"
- depends on (PCI || EISA) && SCSI
+ depends on (PCI || EISA) && HAS_IOPORT && SCSI
select SCSI_SPI_ATTRS
help
This driver supports all of Adaptec's Fast through Ultra 160 PCI
diff --git a/drivers/scsi/aic94xx/Kconfig b/drivers/scsi/aic94xx/Kconfig
index 71931c371b1c..aaa8dadc6e1c 100644
--- a/drivers/scsi/aic94xx/Kconfig
+++ b/drivers/scsi/aic94xx/Kconfig
@@ -8,7 +8,7 @@
config SCSI_AIC94XX
tristate "Adaptec AIC94xx SAS/SATA support"
- depends on PCI
+ depends on PCI && HAS_IOPORT
select SCSI_SAS_LIBSAS
select FW_LOADER
help
diff --git a/drivers/scsi/megaraid/Kconfig.megaraid b/drivers/scsi/megaraid/Kconfig.megaraid
index 2adc2afd9f91..3f2ce1eb081c 100644
--- a/drivers/scsi/megaraid/Kconfig.megaraid
+++ b/drivers/scsi/megaraid/Kconfig.megaraid
@@ -1,13 +1,13 @@
# SPDX-License-Identifier: GPL-2.0-only
config MEGARAID_NEWGEN
bool "LSI Logic New Generation RAID Device Drivers"
- depends on PCI && SCSI
+ depends on PCI && HAS_IOPORT && SCSI
help
LSI Logic RAID Device Drivers
config MEGARAID_MM
tristate "LSI Logic Management Module (New Driver)"
- depends on PCI && SCSI && MEGARAID_NEWGEN
+ depends on PCI && HAS_IOPORT && SCSI && MEGARAID_NEWGEN
help
Management Module provides ioctl, sysfs support for LSI Logic
RAID controllers.
@@ -67,7 +67,7 @@ config MEGARAID_MAILBOX
config MEGARAID_LEGACY
tristate "LSI Logic Legacy MegaRAID Driver"
- depends on PCI && SCSI
+ depends on PCI && HAS_IOPORT && SCSI
help
This driver supports the LSI MegaRAID 418, 428, 438, 466, 762, 490
and 467 SCSI host adapters. This driver also support the all U320
diff --git a/drivers/scsi/mvsas/Kconfig b/drivers/scsi/mvsas/Kconfig
index 79812b80743b..5ac7fd593b17 100644
--- a/drivers/scsi/mvsas/Kconfig
+++ b/drivers/scsi/mvsas/Kconfig
@@ -9,7 +9,7 @@
config SCSI_MVSAS
tristate "Marvell 88SE64XX/88SE94XX SAS/SATA support"
- depends on PCI
+ depends on PCI && HAS_IOPORT
select SCSI_SAS_LIBSAS
select FW_LOADER
help
diff --git a/drivers/scsi/pcmcia/Kconfig b/drivers/scsi/pcmcia/Kconfig
index 9696b6b5591f..449bd85db7bb 100644
--- a/drivers/scsi/pcmcia/Kconfig
+++ b/drivers/scsi/pcmcia/Kconfig
@@ -12,6 +12,7 @@ if SCSI_LOWLEVEL_PCMCIA && SCSI && PCMCIA && m
config PCMCIA_AHA152X
tristate "Adaptec AHA152X PCMCIA support"
+ depends on HAS_IOPORT
select SCSI_SPI_ATTRS
help
Say Y here if you intend to attach this type of PCMCIA SCSI host
@@ -22,6 +23,7 @@ config PCMCIA_AHA152X
config PCMCIA_FDOMAIN
tristate "Future Domain PCMCIA support"
+ depends on HAS_IOPORT
select SCSI_FDOMAIN
help
Say Y here if you intend to attach this type of PCMCIA SCSI host
@@ -32,7 +34,7 @@ config PCMCIA_FDOMAIN
config PCMCIA_NINJA_SCSI
tristate "NinjaSCSI-3 / NinjaSCSI-32Bi (16bit) PCMCIA support"
- depends on !64BIT || COMPILE_TEST
+ depends on (!64BIT || COMPILE_TEST) && HAS_IOPORT
help
If you intend to attach this type of PCMCIA SCSI host adapter to
your computer, say Y here and read
@@ -66,6 +68,7 @@ config PCMCIA_NINJA_SCSI
config PCMCIA_QLOGIC
tristate "Qlogic PCMCIA support"
+ depends on HAS_IOPORT
help
Say Y here if you intend to attach this type of PCMCIA SCSI host
adapter to your computer.
@@ -75,6 +78,7 @@ config PCMCIA_QLOGIC
config PCMCIA_SYM53C500
tristate "Symbios 53c500 PCMCIA support"
+ depends on HAS_IOPORT
help
Say Y here if you have a New Media Bus Toaster or other PCMCIA
SCSI adapter based on the Symbios 53c500 controller.
diff --git a/drivers/scsi/qla2xxx/Kconfig b/drivers/scsi/qla2xxx/Kconfig
index 802c373fd6d9..a584708d3056 100644
--- a/drivers/scsi/qla2xxx/Kconfig
+++ b/drivers/scsi/qla2xxx/Kconfig
@@ -1,7 +1,7 @@
# SPDX-License-Identifier: GPL-2.0-only
config SCSI_QLA_FC
tristate "QLogic QLA2XXX Fibre Channel Support"
- depends on PCI && SCSI
+ depends on PCI && HAS_IOPORT && SCSI
depends on SCSI_FC_ATTRS
depends on NVME_FC || !NVME_FC
select FW_LOADER
--
2.39.2
In a future patch HAS_IOPORT=n will result in inb()/outb() and friends
not being declared. We thus need to add HAS_IOPORT as dependency for
those drivers using them.
Co-developed-by: Arnd Bergmann <[email protected]>
Signed-off-by: Arnd Bergmann <[email protected]>
Signed-off-by: Niklas Schnelle <[email protected]>
---
Note: The HAS_IOPORT Kconfig option was added in v6.4-rc1 so
per-subsystem patches may be applied independently
drivers/i2c/busses/Kconfig | 31 +++++++++++++++++--------------
1 file changed, 17 insertions(+), 14 deletions(-)
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index 87600b4aacb3..6e89944fb8e9 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -18,7 +18,7 @@ config I2C_CCGX_UCSI
config I2C_ALI1535
tristate "ALI 1535"
- depends on PCI
+ depends on PCI && HAS_IOPORT
help
If you say yes to this option, support will be included for the SMB
Host controller on Acer Labs Inc. (ALI) M1535 South Bridges. The SMB
@@ -30,7 +30,7 @@ config I2C_ALI1535
config I2C_ALI1563
tristate "ALI 1563"
- depends on PCI
+ depends on PCI && HAS_IOPORT
help
If you say yes to this option, support will be included for the SMB
Host controller on Acer Labs Inc. (ALI) M1563 South Bridges. The SMB
@@ -42,7 +42,7 @@ config I2C_ALI1563
config I2C_ALI15X3
tristate "ALI 15x3"
- depends on PCI
+ depends on PCI && HAS_IOPORT
help
If you say yes to this option, support will be included for the
Acer Labs Inc. (ALI) M1514 and M1543 motherboard I2C interfaces.
@@ -52,7 +52,7 @@ config I2C_ALI15X3
config I2C_AMD756
tristate "AMD 756/766/768/8111 and nVidia nForce"
- depends on PCI
+ depends on PCI && HAS_IOPORT
help
If you say yes to this option, support will be included for the AMD
756/766/768 mainboard I2C interfaces. The driver also includes
@@ -77,7 +77,7 @@ config I2C_AMD756_S4882
config I2C_AMD8111
tristate "AMD 8111"
- depends on PCI
+ depends on PCI && HAS_IOPORT
help
If you say yes to this option, support will be included for the
second (SMBus 2.0) AMD 8111 mainboard I2C interface.
@@ -107,7 +107,7 @@ config I2C_HIX5HD2
config I2C_I801
tristate "Intel 82801 (ICH/PCH)"
- depends on PCI
+ depends on PCI && HAS_IOPORT
select P2SB if X86
select CHECK_SIGNATURE if X86 && DMI
select I2C_SMBUS
@@ -164,7 +164,7 @@ config I2C_I801
config I2C_ISCH
tristate "Intel SCH SMBus 1.0"
- depends on PCI
+ depends on PCI && HAS_IOPORT
select LPC_SCH
help
Say Y here if you want to use SMBus controller on the Intel SCH
@@ -185,7 +185,7 @@ config I2C_ISMT
config I2C_PIIX4
tristate "Intel PIIX4 and compatible (ATI/AMD/Serverworks/Broadcom/SMSC)"
- depends on PCI
+ depends on PCI && HAS_IOPORT
help
If you say yes to this option, support will be included for the Intel
PIIX4 family of mainboard I2C interfaces. Specifically, the following
@@ -231,7 +231,7 @@ config I2C_CHT_WC
config I2C_NFORCE2
tristate "Nvidia nForce2, nForce3 and nForce4"
- depends on PCI
+ depends on PCI && HAS_IOPORT
help
If you say yes to this option, support will be included for the Nvidia
nForce2, nForce3 and nForce4 families of mainboard I2C interfaces.
@@ -264,7 +264,7 @@ config I2C_NVIDIA_GPU
config I2C_SIS5595
tristate "SiS 5595"
- depends on PCI
+ depends on PCI && HAS_IOPORT
help
If you say yes to this option, support will be included for the
SiS5595 SMBus (a subset of I2C) interface.
@@ -274,7 +274,7 @@ config I2C_SIS5595
config I2C_SIS630
tristate "SiS 630/730/964"
- depends on PCI
+ depends on PCI && HAS_IOPORT
help
If you say yes to this option, support will be included for the
SiS630, SiS730 and SiS964 SMBus (a subset of I2C) interface.
@@ -284,7 +284,7 @@ config I2C_SIS630
config I2C_SIS96X
tristate "SiS 96x"
- depends on PCI
+ depends on PCI && HAS_IOPORT
help
If you say yes to this option, support will be included for the SiS
96x SMBus (a subset of I2C) interfaces. Specifically, the following
@@ -302,7 +302,7 @@ config I2C_SIS96X
config I2C_VIA
tristate "VIA VT82C586B"
- depends on PCI
+ depends on PCI && HAS_IOPORT
select I2C_ALGOBIT
help
If you say yes to this option, support will be included for the VIA
@@ -313,7 +313,7 @@ config I2C_VIA
config I2C_VIAPRO
tristate "VIA VT82C596/82C686/82xx and CX700/VX8xx/VX900"
- depends on PCI
+ depends on PCI && HAS_IOPORT
help
If you say yes to this option, support will be included for the VIA
VT82C596 and later SMBus interface. Specifically, the following
@@ -884,6 +884,7 @@ config I2C_NPCM
config I2C_OCORES
tristate "OpenCores I2C Controller"
+ depends on HAS_IOPORT
help
If you say yes to this option, support will be included for the
OpenCores I2C controller. For details see
@@ -1277,6 +1278,7 @@ config I2C_CP2615
config I2C_PARPORT
tristate "Parallel port adapter"
depends on PARPORT
+ depends on HAS_IOPORT
select I2C_ALGOBIT
select I2C_SMBUS
help
@@ -1385,6 +1387,7 @@ config I2C_ICY
config I2C_MLXCPLD
tristate "Mellanox I2C driver"
depends on X86_64 || COMPILE_TEST
+ depends on HAS_IOPORT
help
This exposes the Mellanox platform I2C busses to the linux I2C layer
for X86 based systems.
--
2.39.2
In a future patch HAS_IOPORT=n will result in inb()/outb() and friends
not being declared. Add dependencies for those drivers that use them.
Co-developed-by: Arnd Bergmann <[email protected]>
Signed-off-by: Arnd Bergmann <[email protected]>
Signed-off-by: Niklas Schnelle <[email protected]>
---
Note: The HAS_IOPORT Kconfig option was added in v6.4-rc1 so
per-subsystem patches may be applied independently
drivers/pcmcia/Kconfig | 5 ++---
1 file changed, 2 insertions(+), 3 deletions(-)
diff --git a/drivers/pcmcia/Kconfig b/drivers/pcmcia/Kconfig
index 44c16508ef14..e72419d7e72e 100644
--- a/drivers/pcmcia/Kconfig
+++ b/drivers/pcmcia/Kconfig
@@ -5,7 +5,6 @@
menuconfig PCCARD
tristate "PCCard (PCMCIA/CardBus) support"
- depends on !UML
help
Say Y here if you want to attach PCMCIA- or PC-cards to your Linux
computer. These are credit-card size devices such as network cards,
@@ -113,7 +112,7 @@ config YENTA_TOSHIBA
config PD6729
tristate "Cirrus PD6729 compatible bridge support"
- depends on PCMCIA && PCI
+ depends on PCMCIA && PCI && HAS_IOPORT
select PCCARD_NONSTATIC
help
This provides support for the Cirrus PD6729 PCI-to-PCMCIA bridge
@@ -121,7 +120,7 @@ config PD6729
config I82092
tristate "i82092 compatible bridge support"
- depends on PCMCIA && PCI
+ depends on PCMCIA && PCI && HAS_IOPORT
select PCCARD_NONSTATIC
help
This provides support for the Intel I82092AA PCI-to-PCMCIA bridge device,
--
2.39.2
In the future inw() and friends will not be compiled on architectures
without I/O port support.
Acked-by: Bjorn Helgaas <[email protected]>
Co-developed-by: Arnd Bergmann <[email protected]>
Signed-off-by: Arnd Bergmann <[email protected]>
Signed-off-by: Niklas Schnelle <[email protected]>
---
Note: The HAS_IOPORT Kconfig option was added in v6.4-rc1 so
per-subsystem patches may be applied independently
drivers/pci/quirks.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index f4e2a88729fd..81fb75f128f7 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -268,6 +268,7 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_NEC, PCI_DEVICE_ID_NEC_CBUS_2, quirk_isa_d
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_NEC, PCI_DEVICE_ID_NEC_CBUS_3, quirk_isa_dma_hangs);
#endif
+#ifdef CONFIG_HAS_IOPORT
/*
* Intel NM10 "TigerPoint" LPC PM1a_STS.BM_STS must be clear
* for some HT machines to use C4 w/o hanging.
@@ -287,6 +288,7 @@ static void quirk_tigerpoint_bm_sts(struct pci_dev *dev)
}
}
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_TGP_LPC, quirk_tigerpoint_bm_sts);
+#endif
/* Chipsets where PCI->PCI transfers vanish or hang */
static void quirk_nopcipci(struct pci_dev *dev)
--
2.39.2
In a future patch HAS_IOPORT=n will result in inb()/outb() and friends
not being declared. We thus need to add HAS_IOPORT as dependency for
those drivers using them.
Co-developed-by: Arnd Bergmann <[email protected]>
Signed-off-by: Arnd Bergmann <[email protected]>
Signed-off-by: Niklas Schnelle <[email protected]>
---
Note: The HAS_IOPORT Kconfig option was added in v6.4-rc1 so
per-subsystem patches may be applied independently
lib/Kconfig.kgdb | 1 +
1 file changed, 1 insertion(+)
diff --git a/lib/Kconfig.kgdb b/lib/Kconfig.kgdb
index 3b9a44008433..d6af143ec84a 100644
--- a/lib/Kconfig.kgdb
+++ b/lib/Kconfig.kgdb
@@ -122,6 +122,7 @@ config KDB_DEFAULT_ENABLE
config KDB_KEYBOARD
bool "KGDB_KDB: keyboard as input device"
depends on VT && KGDB_KDB && !PARISC
+ depends on HAS_IOPORT
default n
help
KDB can use a PS/2 type keyboard for an input device
--
2.39.2
Dear Niklas,
Am 16.05.23 um 12:59 schrieb Niklas Schnelle:
[…]
There is a small typo in the commit message summary/title: impi → ipmi.
Kind regards
Paul
In a future patch HAS_IOPORT=n will result in inb()/outb() and friends
not being declared. We thus need to add HAS_IOPORT as dependency for
those drivers using them unconditionally. For 8250 based drivers some
support MMIO only use so fence only the parts requiring I/O ports.
Co-developed-by: Arnd Bergmann <[email protected]>
Signed-off-by: Arnd Bergmann <[email protected]>
Signed-off-by: Niklas Schnelle <[email protected]>
---
Note: The HAS_IOPORT Kconfig option was added in v6.4-rc1 so
per-subsystem patches may be applied independently
drivers/tty/Kconfig | 4 +--
drivers/tty/serial/8250/8250_early.c | 4 +++
drivers/tty/serial/8250/8250_pci.c | 14 +++++++++
drivers/tty/serial/8250/8250_port.c | 44 +++++++++++++++++++++++-----
drivers/tty/serial/8250/Kconfig | 5 ++--
drivers/tty/serial/Kconfig | 2 +-
6 files changed, 60 insertions(+), 13 deletions(-)
diff --git a/drivers/tty/Kconfig b/drivers/tty/Kconfig
index 341abaed4ce2..bdd267dbd5e4 100644
--- a/drivers/tty/Kconfig
+++ b/drivers/tty/Kconfig
@@ -222,7 +222,7 @@ config MOXA_INTELLIO
config MOXA_SMARTIO
tristate "Moxa SmartIO support v. 2.0"
- depends on SERIAL_NONSTANDARD && PCI
+ depends on SERIAL_NONSTANDARD && PCI && HAS_IOPORT
help
Say Y here if you have a Moxa SmartIO multiport serial card and/or
want to help develop a new version of this driver.
@@ -303,7 +303,7 @@ config GOLDFISH_TTY_EARLY_CONSOLE
config IPWIRELESS
tristate "IPWireless 3G UMTS PCMCIA card support"
- depends on PCMCIA && NETDEVICES
+ depends on PCMCIA && NETDEVICES && HAS_IOPORT
select PPP
help
This is a driver for 3G UMTS PCMCIA card from IPWireless company. In
diff --git a/drivers/tty/serial/8250/8250_early.c b/drivers/tty/serial/8250/8250_early.c
index 0ebde0ab8167..4192b1ae2736 100644
--- a/drivers/tty/serial/8250/8250_early.c
+++ b/drivers/tty/serial/8250/8250_early.c
@@ -48,8 +48,10 @@ static unsigned int serial8250_early_in(struct uart_port *port, int offset)
return readl(port->membase + offset);
case UPIO_MEM32BE:
return ioread32be(port->membase + offset);
+#ifdef CONFIG_HAS_IOPORT
case UPIO_PORT:
return inb(port->iobase + offset);
+#endif
case UPIO_AU:
return port->serial_in(port, reg_offset);
default:
@@ -75,9 +77,11 @@ static void serial8250_early_out(struct uart_port *port, int offset, int value)
case UPIO_MEM32BE:
iowrite32be(value, port->membase + offset);
break;
+#ifdef CONFIG_HAS_IOPORT
case UPIO_PORT:
outb(value, port->iobase + offset);
break;
+#endif
case UPIO_AU:
port->serial_out(port, reg_offset, value);
break;
diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c
index c55be6fda0ca..70bd84a05da7 100644
--- a/drivers/tty/serial/8250/8250_pci.c
+++ b/drivers/tty/serial/8250/8250_pci.c
@@ -847,6 +847,7 @@ static int pci_netmos_init(struct pci_dev *dev)
return num_serial;
}
+#ifdef CONFIG_HAS_IOPORT
/*
* These chips are available with optionally one parallel port and up to
* two serial ports. Unfortunately they all have the same product id.
@@ -973,6 +974,7 @@ static void pci_ite887x_exit(struct pci_dev *dev)
ioport &= 0xffff;
release_region(ioport, ITE_887x_IOSIZE);
}
+#endif /* CONFIG_HAS_IOPORT */
/*
* Oxford Semiconductor Inc.
@@ -1255,6 +1257,7 @@ static int pci_asix_setup(struct serial_private *priv,
#define QOPR_CLOCK_X8 0x0003
#define QOPR_CLOCK_RATE_MASK 0x0003
+#ifdef CONFIG_HAS_IOPORT
/* Quatech devices have their own extra interface features */
static struct pci_device_id quatech_cards[] = {
{ PCI_DEVICE_DATA(QUATECH, QSC100, 1) },
@@ -1474,6 +1477,7 @@ static int pci_quatech_setup(struct serial_private *priv,
pci_warn(priv->dev, "software control of RS422 features not currently supported.\n");
return pci_default_setup(priv, board, port, idx);
}
+#endif /* CONFIG_HAS_IOPORT */
static int pci_default_setup(struct serial_private *priv,
const struct pciserial_board *board,
@@ -1753,6 +1757,7 @@ static int skip_tx_en_setup(struct serial_private *priv,
return pci_default_setup(priv, board, port, idx);
}
+#ifdef CONFIG_HAS_IOPORT
static void kt_handle_break(struct uart_port *p)
{
struct uart_8250_port *up = up_to_u8250p(p);
@@ -1796,6 +1801,7 @@ static int kt_serial_setup(struct serial_private *priv,
port->port.handle_break = kt_handle_break;
return skip_tx_en_setup(priv, board, port, idx);
}
+#endif /* CONFIG_HAS_IOPORT */
static int pci_eg20t_init(struct pci_dev *dev)
{
@@ -1840,6 +1846,7 @@ pci_wch_ch38x_setup(struct serial_private *priv,
#define CH384_XINT_ENABLE_REG 0xEB
#define CH384_XINT_ENABLE_BIT 0x02
+#ifdef CONFIG_HAS_IOPORT
static int pci_wch_ch38x_init(struct pci_dev *dev)
{
int max_port;
@@ -1867,6 +1874,7 @@ static void pci_wch_ch38x_exit(struct pci_dev *dev)
iobase = pci_resource_start(dev, 0);
outb(0x0, iobase + CH384_XINT_ENABLE_REG);
}
+#endif /* CONFIG_HAS_IOPORT */
static int
@@ -2070,6 +2078,7 @@ static struct pci_serial_quirk pci_serial_quirks[] = {
.subdevice = PCI_ANY_ID,
.setup = ce4100_serial_setup,
},
+#ifdef CONFIG_HAS_IOPORT
{
.vendor = PCI_VENDOR_ID_INTEL,
.device = PCI_DEVICE_ID_INTEL_PATSBURG_KT,
@@ -2089,6 +2098,7 @@ static struct pci_serial_quirk pci_serial_quirks[] = {
.setup = pci_default_setup,
.exit = pci_ite887x_exit,
},
+#endif
/*
* National Instruments
*/
@@ -2210,6 +2220,7 @@ static struct pci_serial_quirk pci_serial_quirks[] = {
.exit = pci_ni8430_exit,
},
/* Quatech */
+#ifdef CONFIG_HAS_IOPORT
{
.vendor = PCI_VENDOR_ID_QUATECH,
.device = PCI_ANY_ID,
@@ -2218,6 +2229,7 @@ static struct pci_serial_quirk pci_serial_quirks[] = {
.init = pci_quatech_init,
.setup = pci_quatech_setup,
},
+#endif
/*
* Panacom
*/
@@ -2588,6 +2600,7 @@ static struct pci_serial_quirk pci_serial_quirks[] = {
.subdevice = PCI_ANY_ID,
.setup = pci_wch_ch38x_setup,
},
+#ifdef CONFIG_HAS_IOPORT
/* WCH CH384 8S card (16850 clone) */
{
.vendor = PCIE_VENDOR_ID_WCH,
@@ -2598,6 +2611,7 @@ static struct pci_serial_quirk pci_serial_quirks[] = {
.exit = pci_wch_ch38x_exit,
.setup = pci_wch_ch38x_setup,
},
+#endif
/*
* ASIX devices with FIFO bug
*/
diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c
index fe8d79c4ae95..8d8606dc763b 100644
--- a/drivers/tty/serial/8250/8250_port.c
+++ b/drivers/tty/serial/8250/8250_port.c
@@ -401,6 +401,7 @@ static void au_serial_dl_write(struct uart_8250_port *up, int value)
#endif
+#ifdef CONFIG_HAS_IOPORT
static unsigned int hub6_serial_in(struct uart_port *p, int offset)
{
offset = offset << p->regshift;
@@ -414,6 +415,7 @@ static void hub6_serial_out(struct uart_port *p, int offset, int value)
outb(p->hub6 - 1 + offset, p->iobase);
outb(value, p->iobase + 1);
}
+#endif /* CONFIG_HAS_IOPORT */
static unsigned int mem_serial_in(struct uart_port *p, int offset)
{
@@ -463,6 +465,7 @@ static unsigned int mem32be_serial_in(struct uart_port *p, int offset)
return ioread32be(p->membase + offset);
}
+#ifdef CONFIG_HAS_IOPORT
static unsigned int io_serial_in(struct uart_port *p, int offset)
{
offset = offset << p->regshift;
@@ -474,6 +477,24 @@ static void io_serial_out(struct uart_port *p, int offset, int value)
offset = offset << p->regshift;
outb(value, p->iobase + offset);
}
+#endif
+static unsigned int no_serial_in(struct uart_port *p, int offset)
+{
+ return (unsigned int)-1;
+}
+
+static void no_serial_out(struct uart_port *p, int offset, int value)
+{
+}
+
+#ifdef CONFIG_HAS_IOPORT
+static inline bool is_upf_fourport(struct uart_port *port)
+{
+ return port->flags & UPF_FOURPORT;
+}
+#else
+#define is_upf_fourport(x) false
+#endif
static int serial8250_default_handle_irq(struct uart_port *port);
@@ -485,10 +506,12 @@ static void set_io_from_upio(struct uart_port *p)
up->dl_write = default_serial_dl_write;
switch (p->iotype) {
+#ifdef CONFIG_HAS_IOPORT
case UPIO_HUB6:
p->serial_in = hub6_serial_in;
p->serial_out = hub6_serial_out;
break;
+#endif
case UPIO_MEM:
p->serial_in = mem_serial_in;
@@ -519,10 +542,17 @@ static void set_io_from_upio(struct uart_port *p)
break;
#endif
- default:
+#ifdef CONFIG_HAS_IOPORT
+ case UPIO_PORT:
p->serial_in = io_serial_in;
p->serial_out = io_serial_out;
break;
+#endif
+
+ default:
+ WARN(1, "Unsupported UART type %x\n", p->iotype);
+ p->serial_in = no_serial_in;
+ p->serial_out = no_serial_out;
}
/* Remember loaded iotype */
up->cur_iotype = p->iotype;
@@ -1379,7 +1409,7 @@ static void autoconfig_irq(struct uart_8250_port *up)
unsigned long irqs;
int irq;
- if (port->flags & UPF_FOURPORT) {
+ if (is_upf_fourport(port)) {
ICP = (port->iobase & 0xfe0) | 0x1f;
save_ICP = inb_p(ICP);
outb_p(0x80, ICP);
@@ -1398,7 +1428,7 @@ static void autoconfig_irq(struct uart_8250_port *up)
irqs = probe_irq_on();
serial8250_out_MCR(up, 0);
udelay(10);
- if (port->flags & UPF_FOURPORT) {
+ if (is_upf_fourport(port)) {
serial8250_out_MCR(up, UART_MCR_DTR | UART_MCR_RTS);
} else {
serial8250_out_MCR(up,
@@ -1416,7 +1446,7 @@ static void autoconfig_irq(struct uart_8250_port *up)
serial8250_out_MCR(up, save_mcr);
serial_out(up, UART_IER, save_ier);
- if (port->flags & UPF_FOURPORT)
+ if (is_upf_fourport(port))
outb_p(save_ICP, ICP);
if (uart_console(port))
@@ -2381,7 +2411,7 @@ int serial8250_do_startup(struct uart_port *port)
serial_port_out(port, UART_LCR, UART_LCR_WLEN8);
spin_lock_irqsave(&port->lock, flags);
- if (up->port.flags & UPF_FOURPORT) {
+ if (is_upf_fourport(&up->port)) {
if (!up->port.irq)
up->port.mctrl |= TIOCM_OUT1;
} else
@@ -2463,7 +2493,7 @@ int serial8250_do_startup(struct uart_port *port)
*/
up->ier = UART_IER_RLSI | UART_IER_RDI;
- if (port->flags & UPF_FOURPORT) {
+ if (is_upf_fourport(port)) {
unsigned int icp;
/*
* Enable interrupts on the AST Fourport board
@@ -2506,7 +2536,7 @@ void serial8250_do_shutdown(struct uart_port *port)
serial8250_release_dma(up);
spin_lock_irqsave(&port->lock, flags);
- if (port->flags & UPF_FOURPORT) {
+ if (is_upf_fourport(port)) {
/* reset interrupts on the AST Fourport board */
inb((port->iobase & 0xfe0) | 0x1f);
port->mctrl |= TIOCM_OUT1;
diff --git a/drivers/tty/serial/8250/Kconfig b/drivers/tty/serial/8250/Kconfig
index 5313aa31930f..2a43bea7d7c3 100644
--- a/drivers/tty/serial/8250/Kconfig
+++ b/drivers/tty/serial/8250/Kconfig
@@ -6,7 +6,6 @@
config SERIAL_8250
tristate "8250/16550 and compatible serial support"
- depends on !S390
select SERIAL_CORE
select SERIAL_MCTRL_GPIO if GPIOLIB
help
@@ -72,7 +71,7 @@ config SERIAL_8250_16550A_VARIANTS
config SERIAL_8250_FINTEK
bool "Support for Fintek F81216A LPC to 4 UART RS485 API"
- depends on SERIAL_8250
+ depends on SERIAL_8250 && HAS_IOPORT
help
Selecting this option will add support for the RS485 capabilities
of the Fintek F81216A LPC to 4 UART.
@@ -160,7 +159,7 @@ config SERIAL_8250_HP300
config SERIAL_8250_CS
tristate "8250/16550 PCMCIA device support"
- depends on PCMCIA && SERIAL_8250
+ depends on PCMCIA && SERIAL_8250 && HAS_IOPORT
help
Say Y here to enable support for 16-bit PCMCIA serial devices,
including serial port cards, modems, and the modem functions of
diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
index 398e5aac2e77..dc41b3be6800 100644
--- a/drivers/tty/serial/Kconfig
+++ b/drivers/tty/serial/Kconfig
@@ -871,7 +871,7 @@ config SERIAL_TXX9_STDSERIAL
config SERIAL_JSM
tristate "Digi International NEO and Classic PCI Support"
- depends on PCI
+ depends on PCI && HAS_IOPORT
select SERIAL_CORE
help
This is a driver for Digi International's Neo and Classic series
--
2.39.2
In a future patch HAS_IOPORT=n will result in inb()/outb() and friends
not being declared. We thus need to add HAS_IOPORT as dependency for
those drivers using them.
Reviewed-by: Sean Young <[email protected]> # media/rc
Co-developed-by: Arnd Bergmann <[email protected]>
Signed-off-by: Arnd Bergmann <[email protected]>
Signed-off-by: Niklas Schnelle <[email protected]>
---
Note: The HAS_IOPORT Kconfig option was added in v6.4-rc1 so
per-subsystem patches may be applied independently
drivers/media/pci/dm1105/Kconfig | 2 +-
drivers/media/radio/Kconfig | 14 +++++++++++++-
drivers/media/rc/Kconfig | 6 ++++++
3 files changed, 20 insertions(+), 2 deletions(-)
diff --git a/drivers/media/pci/dm1105/Kconfig b/drivers/media/pci/dm1105/Kconfig
index e0e3af67c99c..4498c37f4990 100644
--- a/drivers/media/pci/dm1105/Kconfig
+++ b/drivers/media/pci/dm1105/Kconfig
@@ -1,7 +1,7 @@
# SPDX-License-Identifier: GPL-2.0-only
config DVB_DM1105
tristate "SDMC DM1105 based PCI cards"
- depends on DVB_CORE && PCI && I2C && I2C_ALGOBIT
+ depends on DVB_CORE && PCI && I2C && I2C_ALGOBIT && HAS_IOPORT
select DVB_PLL if MEDIA_SUBDRV_AUTOSELECT
select DVB_STV0299 if MEDIA_SUBDRV_AUTOSELECT
select DVB_STV0288 if MEDIA_SUBDRV_AUTOSELECT
diff --git a/drivers/media/radio/Kconfig b/drivers/media/radio/Kconfig
index 616a38feb641..d52eccdc7eb9 100644
--- a/drivers/media/radio/Kconfig
+++ b/drivers/media/radio/Kconfig
@@ -15,7 +15,7 @@ if RADIO_ADAPTERS
config RADIO_MAXIRADIO
tristate "Guillemot MAXI Radio FM 2000 radio"
- depends on PCI
+ depends on PCI && HAS_IOPORT
select RADIO_TEA575X
help
Choose Y here if you have this radio card. This card may also be
@@ -232,6 +232,7 @@ source "drivers/media/radio/wl128x/Kconfig"
menuconfig V4L_RADIO_ISA_DRIVERS
bool "ISA radio devices"
depends on ISA || COMPILE_TEST
+ depends on HAS_IOPORT
help
Say Y here to enable support for these ISA drivers.
@@ -240,6 +241,7 @@ if V4L_RADIO_ISA_DRIVERS
config RADIO_AZTECH
tristate "Aztech/Packard Bell Radio"
depends on ISA || COMPILE_TEST
+ depends on HAS_IOPORT
select RADIO_ISA
help
Choose Y here if you have one of these FM radio cards, and then fill
@@ -260,6 +262,7 @@ config RADIO_AZTECH_PORT
config RADIO_CADET
tristate "ADS Cadet AM/FM Tuner"
depends on ISA || COMPILE_TEST
+ depends on HAS_IOPORT
help
Choose Y here if you have one of these AM/FM radio cards, and then
fill in the port address below.
@@ -270,6 +273,7 @@ config RADIO_CADET
config RADIO_GEMTEK
tristate "GemTek Radio card (or compatible) support"
depends on ISA || COMPILE_TEST
+ depends on HAS_IOPORT
select RADIO_ISA
help
Choose Y here if you have this FM radio card, and then fill in the
@@ -309,6 +313,7 @@ config RADIO_GEMTEK_PROBE
config RADIO_ISA
depends on ISA || COMPILE_TEST
+ depends on HAS_IOPORT
tristate
config RADIO_MIROPCM20
@@ -329,6 +334,7 @@ config RADIO_MIROPCM20
config RADIO_RTRACK
tristate "AIMSlab RadioTrack (aka RadioReveal) support"
depends on ISA || COMPILE_TEST
+ depends on HAS_IOPORT
select RADIO_ISA
help
Choose Y here if you have one of these FM radio cards, and then fill
@@ -383,6 +389,7 @@ config RADIO_RTRACK_PORT
config RADIO_SF16FMI
tristate "SF16-FMI/SF16-FMP/SF16-FMD Radio"
depends on ISA || COMPILE_TEST
+ depends on HAS_IOPORT
help
Choose Y here if you have one of these FM radio cards.
@@ -392,6 +399,7 @@ config RADIO_SF16FMI
config RADIO_SF16FMR2
tristate "SF16-FMR2/SF16-FMD2 Radio"
depends on ISA || COMPILE_TEST
+ depends on HAS_IOPORT
select RADIO_TEA575X
help
Choose Y here if you have one of these FM radio cards.
@@ -402,6 +410,7 @@ config RADIO_SF16FMR2
config RADIO_TERRATEC
tristate "TerraTec ActiveRadio ISA Standalone"
depends on ISA || COMPILE_TEST
+ depends on HAS_IOPORT
select RADIO_ISA
help
Choose Y here if you have this FM radio card.
@@ -416,6 +425,7 @@ config RADIO_TERRATEC
config RADIO_TRUST
tristate "Trust FM radio card"
depends on ISA || COMPILE_TEST
+ depends on HAS_IOPORT
select RADIO_ISA
help
This is a driver for the Trust FM radio cards. Say Y if you have
@@ -439,6 +449,7 @@ config RADIO_TRUST_PORT
config RADIO_TYPHOON
tristate "Typhoon Radio (a.k.a. EcoRadio)"
depends on ISA || COMPILE_TEST
+ depends on HAS_IOPORT
select RADIO_ISA
help
Choose Y here if you have one of these FM radio cards, and then fill
@@ -473,6 +484,7 @@ config RADIO_TYPHOON_PORT
config RADIO_ZOLTRIX
tristate "Zoltrix Radio"
depends on ISA || COMPILE_TEST
+ depends on HAS_IOPORT
select RADIO_ISA
help
Choose Y here if you have one of these FM radio cards, and then fill
diff --git a/drivers/media/rc/Kconfig b/drivers/media/rc/Kconfig
index ac4172feb6f9..922c790b577e 100644
--- a/drivers/media/rc/Kconfig
+++ b/drivers/media/rc/Kconfig
@@ -148,6 +148,7 @@ if RC_DEVICES
config IR_ENE
tristate "ENE eHome Receiver/Transceiver (pnp id: ENE0100/ENE02xxx)"
depends on PNP || COMPILE_TEST
+ depends on HAS_IOPORT
help
Say Y here to enable support for integrated infrared receiver
/transceiver made by ENE.
@@ -161,6 +162,7 @@ config IR_ENE
config IR_FINTEK
tristate "Fintek Consumer Infrared Transceiver"
depends on PNP || COMPILE_TEST
+ depends on HAS_IOPORT
help
Say Y here to enable support for integrated infrared receiver
/transceiver made by Fintek. This chip is found on assorted
@@ -249,6 +251,7 @@ config IR_IMON_RAW
config IR_ITE_CIR
tristate "ITE Tech Inc. IT8712/IT8512 Consumer Infrared Transceiver"
depends on PNP || COMPILE_TEST
+ depends on HAS_IOPORT
help
Say Y here to enable support for integrated infrared receivers
/transceivers made by ITE Tech Inc. These are found in
@@ -301,6 +304,7 @@ config IR_MTK
config IR_NUVOTON
tristate "Nuvoton w836x7hg Consumer Infrared Transceiver"
depends on PNP || COMPILE_TEST
+ depends on HAS_IOPORT
help
Say Y here to enable support for integrated infrared receiver
/transceiver made by Nuvoton (formerly Winbond). This chip is
@@ -345,6 +349,7 @@ config IR_RX51
config IR_SERIAL
tristate "Homebrew Serial Port Receiver"
+ depends on HAS_IOPORT
help
Say Y if you want to use Homebrew Serial Port Receivers and
Transceivers.
@@ -412,6 +417,7 @@ config IR_TTUSBIR
config IR_WINBOND_CIR
tristate "Winbond IR remote control"
depends on (X86 && PNP) || COMPILE_TEST
+ depends on HAS_IOPORT
select NEW_LEDS
select LEDS_CLASS
select BITREVERSE
--
2.39.2
In a future patch HAS_IOPORT=n will result in inb()/outb() and friends
not being declared. We thus need to add HAS_IOPORT as dependency for
those drivers using them.
Co-developed-by: Arnd Bergmann <[email protected]>
Signed-off-by: Arnd Bergmann <[email protected]>
Signed-off-by: Niklas Schnelle <[email protected]>
---
Note: The HAS_IOPORT Kconfig option was added in v6.4-rc1 so
per-subsystem patches may be applied independently
drivers/comedi/Kconfig | 103 +++++++++++++++++++++++++++--------------
1 file changed, 68 insertions(+), 35 deletions(-)
diff --git a/drivers/comedi/Kconfig b/drivers/comedi/Kconfig
index 9af280735cba..7a8d402f05be 100644
--- a/drivers/comedi/Kconfig
+++ b/drivers/comedi/Kconfig
@@ -67,6 +67,7 @@ config COMEDI_TEST
config COMEDI_PARPORT
tristate "Parallel port support"
+ depends on HAS_IOPORT
help
Enable support for the standard parallel port.
A cheap and easy way to get a few more digital I/O lines. Steal
@@ -79,6 +80,7 @@ config COMEDI_PARPORT
config COMEDI_SSV_DNP
tristate "SSV Embedded Systems DIL/Net-PC support"
depends on X86_32 || COMPILE_TEST
+ depends on HAS_IOPORT
help
Enable support for SSV Embedded Systems DIL/Net-PC
@@ -89,6 +91,7 @@ endif # COMEDI_MISC_DRIVERS
menuconfig COMEDI_ISA_DRIVERS
bool "Comedi ISA and PC/104 drivers"
+ depends on ISA
help
Enable comedi ISA and PC/104 drivers to be built
@@ -100,7 +103,8 @@ if COMEDI_ISA_DRIVERS
config COMEDI_PCL711
tristate "Advantech PCL-711/711b and ADlink ACL-8112 ISA card support"
- select COMEDI_8254
+ depends on HAS_IOPORT
+ depends on COMEDI_8254
help
Enable support for Advantech PCL-711 and 711b, ADlink ACL-8112
@@ -161,8 +165,9 @@ config COMEDI_PCL730
config COMEDI_PCL812
tristate "Advantech PCL-812/813 and ADlink ACL-8112/8113/8113/8216"
+ depends on HAS_IOPORT
select COMEDI_ISADMA if ISA_DMA_API
- select COMEDI_8254
+ depends on COMEDI_8254
help
Enable support for Advantech PCL-812/PG, PCL-813/B, ADLink
ACL-8112DG/HG/PG, ACL-8113, ACL-8216, ICP DAS A-821PGH/PGL/PGL-NDA,
@@ -173,8 +178,9 @@ config COMEDI_PCL812
config COMEDI_PCL816
tristate "Advantech PCL-814 and PCL-816 ISA card support"
+ depends on HAS_IOPORT
select COMEDI_ISADMA if ISA_DMA_API
- select COMEDI_8254
+ depends on COMEDI_8254
help
Enable support for Advantech PCL-814 and PCL-816 ISA cards
@@ -183,8 +189,9 @@ config COMEDI_PCL816
config COMEDI_PCL818
tristate "Advantech PCL-718 and PCL-818 ISA card support"
+ depends on HAS_IOPORT
select COMEDI_ISADMA if ISA_DMA_API
- select COMEDI_8254
+ depends on COMEDI_8254
help
Enable support for Advantech PCL-818 ISA cards
PCL-818L, PCL-818H, PCL-818HD, PCL-818HG, PCL-818 and PCL-718
@@ -203,7 +210,7 @@ config COMEDI_PCM3724
config COMEDI_AMPLC_DIO200_ISA
tristate "Amplicon PC212E/PC214E/PC215E/PC218E/PC272E"
- select COMEDI_AMPLC_DIO200
+ depends on COMEDI_AMPLC_DIO200
help
Enable support for Amplicon PC212E, PC214E, PC215E, PC218E and
PC272E ISA DIO boards
@@ -255,7 +262,8 @@ config COMEDI_DAC02
config COMEDI_DAS16M1
tristate "MeasurementComputing CIO-DAS16/M1DAS-16 ISA card support"
- select COMEDI_8254
+ depends on HAS_IOPORT
+ depends on COMEDI_8254
select COMEDI_8255
help
Enable support for Measurement Computing CIO-DAS16/M1 ISA cards.
@@ -265,7 +273,7 @@ config COMEDI_DAS16M1
config COMEDI_DAS08_ISA
tristate "DAS-08 compatible ISA and PC/104 card support"
- select COMEDI_DAS08
+ depends on COMEDI_DAS08
help
Enable support for Keithley Metrabyte/ComputerBoards DAS08
and compatible ISA and PC/104 cards:
@@ -278,8 +286,9 @@ config COMEDI_DAS08_ISA
config COMEDI_DAS16
tristate "DAS-16 compatible ISA and PC/104 card support"
+ depends on HAS_IOPORT
select COMEDI_ISADMA if ISA_DMA_API
- select COMEDI_8254
+ depends on COMEDI_8254
select COMEDI_8255
help
Enable support for Keithley Metrabyte/ComputerBoards DAS16
@@ -296,7 +305,8 @@ config COMEDI_DAS16
config COMEDI_DAS800
tristate "DAS800 and compatible ISA card support"
- select COMEDI_8254
+ depends on HAS_IOPORT
+ depends on COMEDI_8254
help
Enable support for Keithley Metrabyte DAS800 and compatible ISA cards
Keithley Metrabyte DAS-800, DAS-801, DAS-802
@@ -308,8 +318,9 @@ config COMEDI_DAS800
config COMEDI_DAS1800
tristate "DAS1800 and compatible ISA card support"
+ depends on HAS_IOPORT
select COMEDI_ISADMA if ISA_DMA_API
- select COMEDI_8254
+ depends on COMEDI_8254
help
Enable support for DAS1800 and compatible ISA cards
Keithley Metrabyte DAS-1701ST, DAS-1701ST-DA, DAS-1701/AO,
@@ -323,7 +334,8 @@ config COMEDI_DAS1800
config COMEDI_DAS6402
tristate "DAS6402 and compatible ISA card support"
- select COMEDI_8254
+ depends on HAS_IOPORT
+ depends on COMEDI_8254
help
Enable support for DAS6402 and compatible ISA cards
Computerboards, Keithley Metrabyte DAS6402 and compatibles
@@ -402,7 +414,8 @@ config COMEDI_FL512
config COMEDI_AIO_AIO12_8
tristate "I/O Products PC/104 AIO12-8 Analog I/O Board support"
- select COMEDI_8254
+ depends on HAS_IOPORT
+ depends on COMEDI_8254
select COMEDI_8255
help
Enable support for I/O Products PC/104 AIO12-8 Analog I/O Board
@@ -456,8 +469,9 @@ config COMEDI_ADQ12B
config COMEDI_NI_AT_A2150
tristate "NI AT-A2150 ISA card support"
+ depends on HAS_IOPORT
select COMEDI_ISADMA if ISA_DMA_API
- select COMEDI_8254
+ depends on COMEDI_8254
help
Enable support for National Instruments AT-A2150 cards
@@ -466,7 +480,8 @@ config COMEDI_NI_AT_A2150
config COMEDI_NI_AT_AO
tristate "NI AT-AO-6/10 EISA card support"
- select COMEDI_8254
+ depends on HAS_IOPORT
+ depends on COMEDI_8254
help
Enable support for National Instruments AT-AO-6/10 cards
@@ -497,7 +512,7 @@ config COMEDI_NI_ATMIO16D
config COMEDI_NI_LABPC_ISA
tristate "NI Lab-PC and compatibles ISA support"
- select COMEDI_NI_LABPC
+ depends on COMEDI_NI_LABPC
help
Enable support for National Instruments Lab-PC and compatibles
Lab-PC-1200, Lab-PC-1200AI, Lab-PC+.
@@ -561,7 +576,7 @@ endif # COMEDI_ISA_DRIVERS
menuconfig COMEDI_PCI_DRIVERS
tristate "Comedi PCI drivers"
- depends on PCI
+ depends on PCI && HAS_IOPORT
help
Enable support for comedi PCI drivers.
@@ -710,7 +725,8 @@ config COMEDI_ADL_PCI8164
config COMEDI_ADL_PCI9111
tristate "ADLink PCI-9111HR support"
- select COMEDI_8254
+ depends on HAS_IOPORT
+ depends on COMEDI_8254
help
Enable support for ADlink PCI9111 cards
@@ -720,7 +736,7 @@ config COMEDI_ADL_PCI9111
config COMEDI_ADL_PCI9118
tristate "ADLink PCI-9118DG, PCI-9118HG, PCI-9118HR support"
depends on HAS_DMA
- select COMEDI_8254
+ depends on COMEDI_8254
help
Enable support for ADlink PCI-9118DG, PCI-9118HG, PCI-9118HR cards
@@ -729,7 +745,8 @@ config COMEDI_ADL_PCI9118
config COMEDI_ADV_PCI1710
tristate "Advantech PCI-171x and PCI-1731 support"
- select COMEDI_8254
+ depends on HAS_IOPORT
+ depends on COMEDI_8254
help
Enable support for Advantech PCI-1710, PCI-1710HG, PCI-1711,
PCI-1713 and PCI-1731
@@ -773,7 +790,8 @@ config COMEDI_ADV_PCI1760
config COMEDI_ADV_PCI_DIO
tristate "Advantech PCI DIO card support"
- select COMEDI_8254
+ depends on HAS_IOPORT
+ depends on COMEDI_8254
select COMEDI_8255
help
Enable support for Advantech PCI DIO cards
@@ -786,7 +804,7 @@ config COMEDI_ADV_PCI_DIO
config COMEDI_AMPLC_DIO200_PCI
tristate "Amplicon PCI215/PCI272/PCIe215/PCIe236/PCIe296 DIO support"
- select COMEDI_AMPLC_DIO200
+ depends on COMEDI_AMPLC_DIO200
help
Enable support for Amplicon PCI215, PCI272, PCIe215, PCIe236
and PCIe296 DIO boards.
@@ -814,7 +832,8 @@ config COMEDI_AMPLC_PC263_PCI
config COMEDI_AMPLC_PCI224
tristate "Amplicon PCI224 and PCI234 support"
- select COMEDI_8254
+ depends on HAS_IOPORT
+ depends on COMEDI_8254
help
Enable support for Amplicon PCI224 and PCI234 AO boards
@@ -823,7 +842,8 @@ config COMEDI_AMPLC_PCI224
config COMEDI_AMPLC_PCI230
tristate "Amplicon PCI230 and PCI260 support"
- select COMEDI_8254
+ depends on HAS_IOPORT
+ depends on COMEDI_8254
select COMEDI_8255
help
Enable support for Amplicon PCI230 and PCI260 Multifunction I/O
@@ -842,7 +862,7 @@ config COMEDI_CONTEC_PCI_DIO
config COMEDI_DAS08_PCI
tristate "DAS-08 PCI support"
- select COMEDI_DAS08
+ depends on COMEDI_DAS08
help
Enable support for PCI DAS-08 cards.
@@ -929,7 +949,8 @@ config COMEDI_CB_PCIDAS64
config COMEDI_CB_PCIDAS
tristate "MeasurementComputing PCI-DAS support"
- select COMEDI_8254
+ depends on HAS_IOPORT
+ depends on COMEDI_8254
select COMEDI_8255
help
Enable support for ComputerBoards/MeasurementComputing PCI-DAS with
@@ -953,7 +974,8 @@ config COMEDI_CB_PCIDDA
config COMEDI_CB_PCIMDAS
tristate "MeasurementComputing PCIM-DAS1602/16, PCIe-DAS1602/16 support"
- select COMEDI_8254
+ depends on HAS_IOPORT
+ depends on COMEDI_8254
select COMEDI_8255
help
Enable support for ComputerBoards/MeasurementComputing PCI Migration
@@ -973,7 +995,8 @@ config COMEDI_CB_PCIMDDA
config COMEDI_ME4000
tristate "Meilhaus ME-4000 support"
- select COMEDI_8254
+ depends on HAS_IOPORT
+ depends on COMEDI_8254
help
Enable support for Meilhaus PCI data acquisition cards
ME-4650, ME-4670i, ME-4680, ME-4680i and ME-4680is
@@ -1031,7 +1054,7 @@ config COMEDI_NI_670X
config COMEDI_NI_LABPC_PCI
tristate "NI Lab-PC PCI-1200 support"
- select COMEDI_NI_LABPC
+ depends on COMEDI_NI_LABPC
help
Enable support for National Instruments Lab-PC PCI-1200.
@@ -1053,6 +1076,7 @@ config COMEDI_NI_PCIDIO
config COMEDI_NI_PCIMIO
tristate "NI PCI-MIO-E series and M series support"
depends on HAS_DMA
+ depends on HAS_IOPORT
select COMEDI_NI_TIOCMD
select COMEDI_8255
help
@@ -1074,7 +1098,8 @@ config COMEDI_NI_PCIMIO
config COMEDI_RTD520
tristate "Real Time Devices PCI4520/DM7520 support"
- select COMEDI_8254
+ depends on HAS_IOPORT
+ depends on COMEDI_8254
help
Enable support for Real Time Devices PCI4520/DM7520
@@ -1114,7 +1139,8 @@ if COMEDI_PCMCIA_DRIVERS
config COMEDI_CB_DAS16_CS
tristate "CB DAS16 series PCMCIA support"
- select COMEDI_8254
+ depends on HAS_IOPORT
+ depends on COMEDI_8254
help
Enable support for the ComputerBoards/MeasurementComputing PCMCIA
cards DAS16/16, PCM-DAS16D/12 and PCM-DAS16s/16
@@ -1124,7 +1150,7 @@ config COMEDI_CB_DAS16_CS
config COMEDI_DAS08_CS
tristate "CB DAS08 PCMCIA support"
- select COMEDI_DAS08
+ depends on COMEDI_DAS08
help
Enable support for the ComputerBoards/MeasurementComputing DAS-08
PCMCIA card
@@ -1134,6 +1160,7 @@ config COMEDI_DAS08_CS
config COMEDI_NI_DAQ_700_CS
tristate "NI DAQCard-700 PCMCIA support"
+ depends on HAS_IOPORT
help
Enable support for the National Instruments PCMCIA DAQCard-700 DIO
@@ -1142,6 +1169,7 @@ config COMEDI_NI_DAQ_700_CS
config COMEDI_NI_DAQ_DIO24_CS
tristate "NI DAQ-Card DIO-24 PCMCIA support"
+ depends on HAS_IOPORT
select COMEDI_8255
help
Enable support for the National Instruments PCMCIA DAQ-Card DIO-24
@@ -1151,7 +1179,7 @@ config COMEDI_NI_DAQ_DIO24_CS
config COMEDI_NI_LABPC_CS
tristate "NI DAQCard-1200 PCMCIA support"
- select COMEDI_NI_LABPC
+ depends on COMEDI_NI_LABPC
help
Enable support for the National Instruments PCMCIA DAQCard-1200
@@ -1160,6 +1188,7 @@ config COMEDI_NI_LABPC_CS
config COMEDI_NI_MIO_CS
tristate "NI DAQCard E series PCMCIA support"
+ depends on HAS_IOPORT
select COMEDI_NI_TIO
select COMEDI_8255
help
@@ -1172,6 +1201,7 @@ config COMEDI_NI_MIO_CS
config COMEDI_QUATECH_DAQP_CS
tristate "Quatech DAQP PCMCIA data capture card support"
+ depends on HAS_IOPORT
help
Enable support for the Quatech DAQP PCMCIA data capture cards
DAQP-208 and DAQP-308
@@ -1248,12 +1278,14 @@ endif # COMEDI_USB_DRIVERS
config COMEDI_8254
tristate
+ depends on HAS_IOPORT
config COMEDI_8255
tristate
config COMEDI_8255_SA
tristate "Standalone 8255 support"
+ depends on HAS_IOPORT
select COMEDI_8255
help
Enable support for 8255 digital I/O as a standalone driver.
@@ -1285,7 +1317,7 @@ config COMEDI_KCOMEDILIB
called kcomedilib.
config COMEDI_AMPLC_DIO200
- select COMEDI_8254
+ depends on COMEDI_8254
tristate
config COMEDI_AMPLC_PC236
@@ -1294,7 +1326,7 @@ config COMEDI_AMPLC_PC236
config COMEDI_DAS08
tristate
- select COMEDI_8254
+ depends on COMEDI_8254
select COMEDI_8255
config COMEDI_ISADMA
@@ -1302,7 +1334,8 @@ config COMEDI_ISADMA
config COMEDI_NI_LABPC
tristate
- select COMEDI_8254
+ depends on HAS_IOPORT
+ depends on COMEDI_8254
select COMEDI_8255
config COMEDI_NI_LABPC_ISADMA
--
2.39.2
With all subsystems and drivers either declaring their dependence on
HAS_IOPORT or fencing I/O port specific code sections we can finally
make inb()/outb() and friends compile-time dependent on HAS_IOPORT as
suggested by Linus in the linked mail. The main benefit of this is that
on platforms such as s390 which have no meaningful way of implementing
inb()/outb() their use without the proper HAS_IOPORT dependency will
result in easy to catch and fix compile-time errors instead of compiling
code that can never work.
Link: https://lore.kernel.org/lkml/CAHk-=wg80je=K7madF4e7WrRNp37e3qh6y10Svhdc7O8SZ_-8g@mail.gmail.com/
Co-developed-by: Arnd Bergmann <[email protected]>
Signed-off-by: Arnd Bergmann <[email protected]>
Signed-off-by: Niklas Schnelle <[email protected]>
---
include/asm-generic/io.h | 60 ++++++++++++++++++++++++++++++++++++++++
1 file changed, 60 insertions(+)
diff --git a/include/asm-generic/io.h b/include/asm-generic/io.h
index 587e7e9b9a37..6ab2b6dfb6b1 100644
--- a/include/asm-generic/io.h
+++ b/include/asm-generic/io.h
@@ -539,6 +539,7 @@ static inline void writesq(volatile void __iomem *addr, const void *buffer,
#if !defined(inb) && !defined(_inb)
#define _inb _inb
+#ifdef CONFIG_HAS_IOPORT
static inline u8 _inb(unsigned long addr)
{
u8 val;
@@ -548,10 +549,15 @@ static inline u8 _inb(unsigned long addr)
__io_par(val);
return val;
}
+#else
+u8 _inb(unsigned long addr)
+ __compiletime_error("inb()) requires CONFIG_HAS_IOPORT");
+#endif
#endif
#if !defined(inw) && !defined(_inw)
#define _inw _inw
+#ifdef CONFIG_HAS_IOPORT
static inline u16 _inw(unsigned long addr)
{
u16 val;
@@ -561,10 +567,15 @@ static inline u16 _inw(unsigned long addr)
__io_par(val);
return val;
}
+#else
+u16 _inw(unsigned long addr)
+ __compiletime_error("inw() requires CONFIG_HAS_IOPORT");
+#endif
#endif
#if !defined(inl) && !defined(_inl)
#define _inl _inl
+#ifdef CONFIG_HAS_IOPORT
static inline u32 _inl(unsigned long addr)
{
u32 val;
@@ -574,36 +585,55 @@ static inline u32 _inl(unsigned long addr)
__io_par(val);
return val;
}
+#else
+u32 _inl(unsigned long addr)
+ __compiletime_error("inl() requires CONFIG_HAS_IOPORT");
+#endif
#endif
#if !defined(outb) && !defined(_outb)
#define _outb _outb
+#ifdef CONFIG_HAS_IOPORT
static inline void _outb(u8 value, unsigned long addr)
{
__io_pbw();
__raw_writeb(value, PCI_IOBASE + addr);
__io_paw();
}
+#else
+void _outb(u8 value, unsigned long addr)
+ __compiletime_error("outb() requires CONFIG_HAS_IOPORT");
+#endif
#endif
#if !defined(outw) && !defined(_outw)
#define _outw _outw
+#ifdef CONFIG_HAS_IOPORT
static inline void _outw(u16 value, unsigned long addr)
{
__io_pbw();
__raw_writew((u16 __force)cpu_to_le16(value), PCI_IOBASE + addr);
__io_paw();
}
+#else
+void _outw(u16 value, unsigned long addr)
+ __compiletime_error("outw() requires CONFIG_HAS_IOPORT");
+#endif
#endif
#if !defined(outl) && !defined(_outl)
#define _outl _outl
+#ifdef CONFIG_HAS_IOPORT
static inline void _outl(u32 value, unsigned long addr)
{
__io_pbw();
__raw_writel((u32 __force)cpu_to_le32(value), PCI_IOBASE + addr);
__io_paw();
}
+#else
+void _outl(u32 value, unsigned long addr)
+ __compiletime_error("outl() requires CONFIG_HAS_IOPORT");
+#endif
#endif
#include <linux/logic_pio.h>
@@ -687,53 +717,83 @@ static inline void outl_p(u32 value, unsigned long addr)
#ifndef insb
#define insb insb
+#ifdef CONFIG_HAS_IOPORT
static inline void insb(unsigned long addr, void *buffer, unsigned int count)
{
readsb(PCI_IOBASE + addr, buffer, count);
}
+#else
+void insb(unsigned long addr, void *buffer, unsigned int count)
+ __compiletime_error("insb() requires HAS_IOPORT");
+#endif
#endif
#ifndef insw
#define insw insw
+#ifdef CONFIG_HAS_IOPORT
static inline void insw(unsigned long addr, void *buffer, unsigned int count)
{
readsw(PCI_IOBASE + addr, buffer, count);
}
+#else
+void insw(unsigned long addr, void *buffer, unsigned int count)
+ __compiletime_error("insw() requires HAS_IOPORT");
+#endif
#endif
#ifndef insl
#define insl insl
+#ifdef CONFIG_HAS_IOPORT
static inline void insl(unsigned long addr, void *buffer, unsigned int count)
{
readsl(PCI_IOBASE + addr, buffer, count);
}
+#else
+void insl(unsigned long addr, void *buffer, unsigned int count)
+ __compiletime_error("insl() requires HAS_IOPORT");
+#endif
#endif
#ifndef outsb
#define outsb outsb
+#ifdef CONFIG_HAS_IOPORT
static inline void outsb(unsigned long addr, const void *buffer,
unsigned int count)
{
writesb(PCI_IOBASE + addr, buffer, count);
}
+#else
+void outsb(unsigned long addr, const void *buffer, unsigned int count)
+ __compiletime_error("outsb() requires HAS_IOPORT");
+#endif
#endif
#ifndef outsw
#define outsw outsw
+#ifdef CONFIG_HAS_IOPORT
static inline void outsw(unsigned long addr, const void *buffer,
unsigned int count)
{
writesw(PCI_IOBASE + addr, buffer, count);
}
+#else
+void outsw(unsigned long addr, const void *buffer, unsigned int count)
+ __compiletime_error("outsw() requires HAS_IOPORT");
+#endif
#endif
#ifndef outsl
#define outsl outsl
+#ifdef CONFIG_HAS_IOPORT
static inline void outsl(unsigned long addr, const void *buffer,
unsigned int count)
{
writesl(PCI_IOBASE + addr, buffer, count);
}
+#else
+void outsl(unsigned long addr, const void *buffer, unsigned int count)
+ __compiletime_error("outsl() requires HAS_IOPORT");
+#endif
#endif
#ifndef insb_p
--
2.39.2
In a future patch HAS_IOPORT=n will result in inb()/outb() and friends
not being declared. We thus need to add HAS_IOPORT as dependency for
those drivers using them.
Co-developed-by: Arnd Bergmann <[email protected]>
Signed-off-by: Arnd Bergmann <[email protected]>
Signed-off-by: Niklas Schnelle <[email protected]>
---
Note: The HAS_IOPORT Kconfig option was added in v6.4-rc1 so
per-subsystem patches may be applied independently
drivers/gpio/Kconfig | 26 +++++++++++++-------------
1 file changed, 13 insertions(+), 13 deletions(-)
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index 5521f060d58e..a470ec8d617b 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -704,18 +704,6 @@ config GPIO_VISCONTI
help
Say yes here to support GPIO on Tohisba Visconti.
-config GPIO_VX855
- tristate "VIA VX855/VX875 GPIO"
- depends on (X86 || COMPILE_TEST) && PCI
- select MFD_CORE
- select MFD_VX855
- help
- Support access to the VX855/VX875 GPIO lines through the GPIO library.
-
- This driver provides common support for accessing the device.
- Additional drivers must be enabled in order to use the
- functionality of the device.
-
config GPIO_WCD934X
tristate "Qualcomm Technologies Inc WCD9340/WCD9341 GPIO controller driver"
depends on MFD_WCD934X && OF_GPIO
@@ -835,7 +823,19 @@ config GPIO_IDT3243X
endmenu
menu "Port-mapped I/O GPIO drivers"
- depends on X86 # Unconditional I/O space access
+ depends on X86 && HAS_IOPORT # I/O space access
+
+config GPIO_VX855
+ tristate "VIA VX855/VX875 GPIO"
+ depends on PCI
+ select MFD_CORE
+ select MFD_VX855
+ help
+ Support access to the VX855/VX875 GPIO lines through the GPIO library.
+
+ This driver provides common support for accessing the device.
+ Additional drivers must be enabled in order to use the
+ functionality of the device.
config GPIO_I8255
tristate
--
2.39.2
In a future patch HAS_IOPORT=n will result in inb()/outb() and friends
not being declared. We thus need to add HAS_IOPORT as dependency for
those drivers using them and guard inline code in headers.
Co-developed-by: Arnd Bergmann <[email protected]>
Signed-off-by: Arnd Bergmann <[email protected]>
Signed-off-by: Niklas Schnelle <[email protected]>
---
Note: The HAS_IOPORT Kconfig option was added in v6.4-rc1 so
per-subsystem patches may be applied independently
drivers/video/console/Kconfig | 1 +
drivers/video/fbdev/Kconfig | 21 +++++++++++----------
include/video/vga.h | 8 ++++++++
3 files changed, 20 insertions(+), 10 deletions(-)
diff --git a/drivers/video/console/Kconfig b/drivers/video/console/Kconfig
index 22cea5082ac4..64974eaa3ac5 100644
--- a/drivers/video/console/Kconfig
+++ b/drivers/video/console/Kconfig
@@ -10,6 +10,7 @@ config VGA_CONSOLE
depends on !4xx && !PPC_8xx && !SPARC && !M68K && !PARISC && !SUPERH && \
(!ARM || ARCH_FOOTBRIDGE || ARCH_INTEGRATOR || ARCH_NETWINDER) && \
!ARM64 && !ARC && !MICROBLAZE && !OPENRISC && !S390 && !UML
+ depends on HAS_IOPORT
select APERTURE_HELPERS if (DRM || FB || VFIO_PCI_CORE)
default y
help
diff --git a/drivers/video/fbdev/Kconfig b/drivers/video/fbdev/Kconfig
index 96e91570cdd3..a56c57dd839b 100644
--- a/drivers/video/fbdev/Kconfig
+++ b/drivers/video/fbdev/Kconfig
@@ -335,7 +335,7 @@ config FB_IMX
config FB_CYBER2000
tristate "CyberPro 2000/2010/5000 support"
- depends on FB && PCI && (BROKEN || !SPARC64)
+ depends on FB && PCI && HAS_IOPORT && (BROKEN || !SPARC64)
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
@@ -429,6 +429,7 @@ config FB_FM2
config FB_ARC
tristate "Arc Monochrome LCD board support"
depends on FB && (X86 || COMPILE_TEST)
+ depends on HAS_IOPORT
select FB_SYS_FILLRECT
select FB_SYS_COPYAREA
select FB_SYS_IMAGEBLIT
@@ -1332,7 +1333,7 @@ config FB_ATY_BACKLIGHT
config FB_S3
tristate "S3 Trio/Virge support"
- depends on FB && PCI
+ depends on FB && PCI && HAS_IOPORT
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
@@ -1393,7 +1394,7 @@ config FB_SAVAGE_ACCEL
config FB_SIS
tristate "SiS/XGI display support"
- depends on FB && PCI
+ depends on FB && PCI && HAS_IOPORT
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
@@ -1424,7 +1425,7 @@ config FB_SIS_315
config FB_VIA
tristate "VIA UniChrome (Pro) and Chrome9 display support"
- depends on FB && PCI && GPIOLIB && I2C && (X86 || COMPILE_TEST)
+ depends on FB && PCI && GPIOLIB && I2C && HAS_IOPORT && (X86 || COMPILE_TEST)
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
@@ -1463,7 +1464,7 @@ endif
config FB_NEOMAGIC
tristate "NeoMagic display support"
- depends on FB && PCI
+ depends on FB && PCI && HAS_IOPORT
select FB_MODE_HELPERS
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
@@ -1493,7 +1494,7 @@ config FB_KYRO
config FB_3DFX
tristate "3Dfx Banshee/Voodoo3/Voodoo5 display support"
- depends on FB && PCI
+ depends on FB && PCI && HAS_IOPORT
select FB_CFB_IMAGEBLIT
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
@@ -1543,7 +1544,7 @@ config FB_VOODOO1
config FB_VT8623
tristate "VIA VT8623 support"
- depends on FB && PCI
+ depends on FB && PCI && HAS_IOPORT
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
@@ -1558,7 +1559,7 @@ config FB_VT8623
config FB_TRIDENT
tristate "Trident/CyberXXX/CyberBlade support"
- depends on FB && PCI
+ depends on FB && PCI && HAS_IOPORT
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
@@ -1581,7 +1582,7 @@ config FB_TRIDENT
config FB_ARK
tristate "ARK 2000PV support"
- depends on FB && PCI
+ depends on FB && PCI && HAS_IOPORT
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
@@ -2195,7 +2196,7 @@ config FB_SSD1307
config FB_SM712
tristate "Silicon Motion SM712 framebuffer support"
- depends on FB && PCI
+ depends on FB && PCI && HAS_IOPORT
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
diff --git a/include/video/vga.h b/include/video/vga.h
index 947c0abd04ef..f4b806b85c86 100644
--- a/include/video/vga.h
+++ b/include/video/vga.h
@@ -203,18 +203,26 @@ extern int restore_vga(struct vgastate *state);
static inline unsigned char vga_io_r (unsigned short port)
{
+#ifdef CONFIG_HAS_IOPORT
return inb_p(port);
+#else
+ return 0xff;
+#endif
}
static inline void vga_io_w (unsigned short port, unsigned char val)
{
+#ifdef CONFIG_HAS_IOPORT
outb_p(val, port);
+#endif
}
static inline void vga_io_w_fast (unsigned short port, unsigned char reg,
unsigned char val)
{
+#ifdef CONFIG_HAS_IOPORT
outw(VGA_OUT16VAL (val, reg), port);
+#endif
}
static inline unsigned char vga_mm_r (void __iomem *regbase, unsigned short port)
--
2.39.2
In a future patch HAS_IOPORT=n will result in inb()/outb() and friends
not being declared. We thus need to add HAS_IOPORT as dependency for
those drivers using them.
Acked-by: Guenter Roeck <[email protected]>
Co-developed-by: Arnd Bergmann <[email protected]>
Signed-off-by: Arnd Bergmann <[email protected]>
Signed-off-by: Niklas Schnelle <[email protected]>
---
Note: The HAS_IOPORT Kconfig option was added in v6.4-rc1 so
per-subsystem patches may be applied independently
drivers/hwmon/Kconfig | 21 ++++++++++++++++++---
1 file changed, 18 insertions(+), 3 deletions(-)
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index fc640201a2de..20bde0d888f9 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -578,6 +578,7 @@ config SENSORS_SPARX5
config SENSORS_F71805F
tristate "Fintek F71805F/FG, F71806F/FG and F71872F/FG"
+ depends on HAS_IOPORT
depends on !PPC
help
If you say yes here you get support for hardware monitoring
@@ -589,6 +590,7 @@ config SENSORS_F71805F
config SENSORS_F71882FG
tristate "Fintek F71882FG and compatibles"
+ depends on HAS_IOPORT
depends on !PPC
help
If you say yes here you get support for hardware monitoring
@@ -801,6 +803,7 @@ config SENSORS_CORETEMP
config SENSORS_IT87
tristate "ITE IT87xx and compatibles"
+ depends on HAS_IOPORT
depends on !PPC
select HWMON_VID
help
@@ -1465,6 +1468,7 @@ config SENSORS_LM95245
config SENSORS_PC87360
tristate "National Semiconductor PC87360 family"
+ depends on HAS_IOPORT
depends on !PPC
select HWMON_VID
help
@@ -1479,6 +1483,7 @@ config SENSORS_PC87360
config SENSORS_PC87427
tristate "National Semiconductor PC87427"
+ depends on HAS_IOPORT
depends on !PPC
help
If you say yes here you get access to the hardware monitoring
@@ -1510,6 +1515,7 @@ config SENSORS_NTC_THERMISTOR
config SENSORS_NCT6683
tristate "Nuvoton NCT6683D"
+ depends on HAS_IOPORT
depends on !PPC
help
If you say yes here you get support for the hardware monitoring
@@ -1531,6 +1537,7 @@ config SENSORS_NCT6775_CORE
config SENSORS_NCT6775
tristate "Platform driver for Nuvoton NCT6775F and compatibles"
+ depends on HAS_IOPORT
depends on !PPC
depends on ACPI || ACPI=n
select HWMON_VID
@@ -1767,7 +1774,7 @@ config SENSORS_SHTC1
config SENSORS_SIS5595
tristate "Silicon Integrated Systems Corp. SiS5595"
- depends on PCI
+ depends on PCI && HAS_IOPORT
help
If you say yes here you get support for the integrated sensors in
SiS5595 South Bridges.
@@ -1787,6 +1794,7 @@ config SENSORS_SY7636A
config SENSORS_DME1737
tristate "SMSC DME1737, SCH311x and compatibles"
+ depends on HAS_IOPORT
depends on I2C && !PPC
select HWMON_VID
help
@@ -1843,6 +1851,7 @@ config SENSORS_EMC6W201
config SENSORS_SMSC47M1
tristate "SMSC LPC47M10x and compatibles"
+ depends on HAS_IOPORT
depends on !PPC
help
If you say yes here you get support for the integrated fan
@@ -1877,6 +1886,7 @@ config SENSORS_SMSC47M192
config SENSORS_SMSC47B397
tristate "SMSC LPC47B397-NC"
+ depends on HAS_IOPORT
depends on !PPC
help
If you say yes here you get support for the SMSC LPC47B397-NC
@@ -1890,6 +1900,7 @@ config SENSORS_SCH56XX_COMMON
config SENSORS_SCH5627
tristate "SMSC SCH5627"
+ depends on HAS_IOPORT
depends on !PPC && WATCHDOG
select SENSORS_SCH56XX_COMMON
select WATCHDOG_CORE
@@ -1903,6 +1914,7 @@ config SENSORS_SCH5627
config SENSORS_SCH5636
tristate "SMSC SCH5636"
+ depends on HAS_IOPORT
depends on !PPC && WATCHDOG
select SENSORS_SCH56XX_COMMON
select WATCHDOG_CORE
@@ -2155,7 +2167,7 @@ config SENSORS_VIA_CPUTEMP
config SENSORS_VIA686A
tristate "VIA686A"
- depends on PCI
+ depends on PCI && HAS_IOPORT
help
If you say yes here you get support for the integrated sensors in
Via 686A/B South Bridges.
@@ -2165,6 +2177,7 @@ config SENSORS_VIA686A
config SENSORS_VT1211
tristate "VIA VT1211"
+ depends on HAS_IOPORT
depends on !PPC
select HWMON_VID
help
@@ -2176,7 +2189,7 @@ config SENSORS_VT1211
config SENSORS_VT8231
tristate "VIA VT8231"
- depends on PCI
+ depends on PCI && HAS_IOPORT
select HWMON_VID
help
If you say yes here then you get support for the integrated sensors
@@ -2284,6 +2297,7 @@ config SENSORS_W83L786NG
config SENSORS_W83627HF
tristate "Winbond W83627HF, W83627THF, W83637HF, W83687THF, W83697HF"
+ depends on HAS_IOPORT
depends on !PPC
select HWMON_VID
help
@@ -2296,6 +2310,7 @@ config SENSORS_W83627HF
config SENSORS_W83627EHF
tristate "Winbond W83627EHF/EHG/DHG/UHG, W83667HG"
+ depends on HAS_IOPORT
depends on !PPC
select HWMON_VID
help
--
2.39.2
Just below the removed lines par->clk_wr_offset is hard coded to 3 so
there is no use in determining a different clock just to then ignore it
anyway. This also removes the only I/O port use remaining in the driver
allowing it to be built without CONFIG_HAS_IOPORT.
Link: https://lore.kernel.org/all/[email protected]/
Suggested-by: Ville Syrjälä <[email protected]>
Signed-off-by: Niklas Schnelle <[email protected]>
---
Note: The HAS_IOPORT Kconfig option was added in v6.4-rc1 so
per-subsystem patches may be applied independently
drivers/video/fbdev/aty/atyfb_base.c | 5 -----
1 file changed, 5 deletions(-)
diff --git a/drivers/video/fbdev/aty/atyfb_base.c b/drivers/video/fbdev/aty/atyfb_base.c
index b02e4e645035..cba2b113b28b 100644
--- a/drivers/video/fbdev/aty/atyfb_base.c
+++ b/drivers/video/fbdev/aty/atyfb_base.c
@@ -3498,11 +3498,6 @@ static int atyfb_setup_generic(struct pci_dev *pdev, struct fb_info *info,
if (ret)
goto atyfb_setup_generic_fail;
#endif
- if (!(aty_ld_le32(CRTC_GEN_CNTL, par) & CRTC_EXT_DISP_EN))
- par->clk_wr_offset = (inb(R_GENMO) & 0x0CU) >> 2;
- else
- par->clk_wr_offset = aty_ld_8(CLOCK_CNTL, par) & 0x03U;
-
/* according to ATI, we should use clock 3 for acelerated mode */
par->clk_wr_offset = 3;
--
2.39.2
In a future patch HAS_IOPORT=n will result in inb()/outb() and friends
not being declared. We thus need to add HAS_IOPORT as dependency for
those drivers using them.
Acked-by: Jonathan Cameron <[email protected]>
Co-developed-by: Arnd Bergmann <[email protected]>
Signed-off-by: Arnd Bergmann <[email protected]>
Signed-off-by: Niklas Schnelle <[email protected]>
---
Note: The HAS_IOPORT Kconfig option was added in v6.4-rc1 so
per-subsystem patches may be applied independently
drivers/iio/adc/Kconfig | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig
index eb2b09ef5d5b..53098aca06ea 100644
--- a/drivers/iio/adc/Kconfig
+++ b/drivers/iio/adc/Kconfig
@@ -145,7 +145,7 @@ config AD7606
config AD7606_IFACE_PARALLEL
tristate "Analog Devices AD7606 ADC driver with parallel interface support"
- depends on HAS_IOMEM
+ depends on HAS_IOPORT
select AD7606
help
Say yes here to build parallel interface support for Analog Devices:
--
2.39.2
In a future patch HAS_IOPORT=n will result in inb()/outb() and friends
not being declared. We thus need to add HAS_IOPORT as dependency for
those drivers using them.
Co-developed-by: Arnd Bergmann <[email protected]>
Signed-off-by: Arnd Bergmann <[email protected]>
Signed-off-by: Niklas Schnelle <[email protected]>
---
Note: The HAS_IOPORT Kconfig option was added in v6.4-rc1 so
per-subsystem patches may be applied independently
drivers/counter/Kconfig | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/counter/Kconfig b/drivers/counter/Kconfig
index 4228be917038..e65a2bf178b8 100644
--- a/drivers/counter/Kconfig
+++ b/drivers/counter/Kconfig
@@ -15,6 +15,7 @@ if COUNTER
config 104_QUAD_8
tristate "ACCES 104-QUAD-8 driver"
depends on (PC104 && X86) || COMPILE_TEST
+ depends on HAS_IOPORT_MAP
select ISA_BUS_API
help
Say yes here to build support for the ACCES 104-QUAD-8 quadrature
--
2.39.2
In a future patch HAS_IOPORT=n will result in inb()/outb() and friends
not being declared. We thus need to add HAS_IOPORT as dependency for
those drivers using them.
Co-developed-by: Arnd Bergmann <[email protected]>
Signed-off-by: Arnd Bergmann <[email protected]>
Signed-off-by: Niklas Schnelle <[email protected]>
---
Note: The HAS_IOPORT Kconfig option was added in v6.4-rc1 so
per-subsystem patches may be applied independently
drivers/input/serio/Kconfig | 1 +
drivers/input/touchscreen/Kconfig | 1 +
2 files changed, 2 insertions(+)
diff --git a/drivers/input/serio/Kconfig b/drivers/input/serio/Kconfig
index f39b7b3f7942..17edc1597446 100644
--- a/drivers/input/serio/Kconfig
+++ b/drivers/input/serio/Kconfig
@@ -148,6 +148,7 @@ config HIL_MLC
config SERIO_PCIPS2
tristate "PCI PS/2 keyboard and PS/2 mouse controller"
depends on PCI
+ depends on HAS_IOPORT
help
Say Y here if you have a Mobility Docking station with PS/2
keyboard and mice ports.
diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig
index 143ff43c67ae..c2cbd332af1d 100644
--- a/drivers/input/touchscreen/Kconfig
+++ b/drivers/input/touchscreen/Kconfig
@@ -700,6 +700,7 @@ config TOUCHSCREEN_INEXIO
config TOUCHSCREEN_MK712
tristate "ICS MicroClock MK712 touchscreen"
+ depends on ISA
help
Say Y here if you have the ICS MicroClock MK712 touchscreen
controller chip in your system.
--
2.39.2
In a future patch HAS_IOPORT=n will result in inb()/outb() and friends
not being declared. We thus need to add HAS_IOPORT as dependency for
those drivers requiring them. For the DEFXX driver the use of I/O
ports is optional and we only need to fence specific code paths. It also
turns out that with HAS_IOPORT handled explicitly HAMRADIO does not need
the !S390 dependency and successfully builds the bpqether driver.
Acked-by: Marc Kleine-Budde <[email protected]>
Co-developed-by: Arnd Bergmann <[email protected]>
Signed-off-by: Arnd Bergmann <[email protected]>
Acked-by: Jakub Kicinski <[email protected]>
Signed-off-by: Niklas Schnelle <[email protected]>
---
Note: The HAS_IOPORT Kconfig option was added in v6.4-rc1 so
per-subsystem patches may be applied independently
drivers/net/Kconfig | 2 +-
drivers/net/arcnet/Kconfig | 2 +-
drivers/net/can/cc770/Kconfig | 1 +
drivers/net/can/sja1000/Kconfig | 1 +
drivers/net/ethernet/3com/Kconfig | 4 ++--
drivers/net/ethernet/8390/Kconfig | 6 +++---
drivers/net/ethernet/amd/Kconfig | 4 ++--
drivers/net/ethernet/fujitsu/Kconfig | 2 +-
drivers/net/ethernet/intel/Kconfig | 2 +-
drivers/net/ethernet/sis/Kconfig | 4 ++--
drivers/net/ethernet/smsc/Kconfig | 2 +-
drivers/net/ethernet/ti/Kconfig | 2 +-
drivers/net/ethernet/via/Kconfig | 1 +
drivers/net/ethernet/xircom/Kconfig | 2 +-
drivers/net/fddi/defxx.c | 2 +-
drivers/net/hamradio/Kconfig | 6 +++---
drivers/net/wan/Kconfig | 2 +-
net/ax25/Kconfig | 2 +-
18 files changed, 25 insertions(+), 22 deletions(-)
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index d0a1ed216d15..817322605825 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -476,7 +476,7 @@ source "drivers/net/ipa/Kconfig"
config NET_SB1000
tristate "General Instruments Surfboard 1000"
- depends on PNP
+ depends on ISA && PNP
help
This is a driver for the General Instrument (also known as
NextLevel) SURFboard 1000 internal
diff --git a/drivers/net/arcnet/Kconfig b/drivers/net/arcnet/Kconfig
index a51b9dab6d3a..d1d07a1d4fbc 100644
--- a/drivers/net/arcnet/Kconfig
+++ b/drivers/net/arcnet/Kconfig
@@ -4,7 +4,7 @@
#
menuconfig ARCNET
- depends on NETDEVICES && (ISA || PCI || PCMCIA)
+ depends on NETDEVICES && (ISA || PCI || PCMCIA) && HAS_IOPORT
tristate "ARCnet support"
help
If you have a network card of this type, say Y and check out the
diff --git a/drivers/net/can/cc770/Kconfig b/drivers/net/can/cc770/Kconfig
index 9ef1359319f0..467ef19de1c1 100644
--- a/drivers/net/can/cc770/Kconfig
+++ b/drivers/net/can/cc770/Kconfig
@@ -7,6 +7,7 @@ if CAN_CC770
config CAN_CC770_ISA
tristate "ISA Bus based legacy CC770 driver"
+ depends on ISA
help
This driver adds legacy support for CC770 and AN82527 chips
connected to the ISA bus using I/O port, memory mapped or
diff --git a/drivers/net/can/sja1000/Kconfig b/drivers/net/can/sja1000/Kconfig
index 4b2f9cb17fc3..01168db4c106 100644
--- a/drivers/net/can/sja1000/Kconfig
+++ b/drivers/net/can/sja1000/Kconfig
@@ -87,6 +87,7 @@ config CAN_PLX_PCI
config CAN_SJA1000_ISA
tristate "ISA Bus based legacy SJA1000 driver"
+ depends on ISA
help
This driver adds legacy support for SJA1000 chips connected to
the ISA bus using I/O port, memory mapped or indirect access.
diff --git a/drivers/net/ethernet/3com/Kconfig b/drivers/net/ethernet/3com/Kconfig
index 706bd59bf645..1fbab79e2be4 100644
--- a/drivers/net/ethernet/3com/Kconfig
+++ b/drivers/net/ethernet/3com/Kconfig
@@ -44,7 +44,7 @@ config 3C515
config PCMCIA_3C574
tristate "3Com 3c574 PCMCIA support"
- depends on PCMCIA
+ depends on PCMCIA && HAS_IOPORT
help
Say Y here if you intend to attach a 3Com 3c574 or compatible PCMCIA
(PC-card) Fast Ethernet card to your computer.
@@ -54,7 +54,7 @@ config PCMCIA_3C574
config PCMCIA_3C589
tristate "3Com 3c589 PCMCIA support"
- depends on PCMCIA
+ depends on PCMCIA && HAS_IOPORT
help
Say Y here if you intend to attach a 3Com 3c589 or compatible PCMCIA
(PC-card) Ethernet card to your computer.
diff --git a/drivers/net/ethernet/8390/Kconfig b/drivers/net/ethernet/8390/Kconfig
index a4130e643342..345f250781c6 100644
--- a/drivers/net/ethernet/8390/Kconfig
+++ b/drivers/net/ethernet/8390/Kconfig
@@ -19,7 +19,7 @@ if NET_VENDOR_8390
config PCMCIA_AXNET
tristate "Asix AX88190 PCMCIA support"
- depends on PCMCIA
+ depends on PCMCIA && HAS_IOPORT
help
Say Y here if you intend to attach an Asix AX88190-based PCMCIA
(PC-card) Fast Ethernet card to your computer. These cards are
@@ -117,7 +117,7 @@ config NE2000
config NE2K_PCI
tristate "PCI NE2000 and clones support (see help)"
- depends on PCI
+ depends on PCI && HAS_IOPORT
select CRC32
help
This driver is for NE2000 compatible PCI cards. It will not work
@@ -146,7 +146,7 @@ config APNE
config PCMCIA_PCNET
tristate "NE2000 compatible PCMCIA support"
- depends on PCMCIA
+ depends on PCMCIA && HAS_IOPORT
select CRC32
help
Say Y here if you intend to attach an NE2000 compatible PCMCIA
diff --git a/drivers/net/ethernet/amd/Kconfig b/drivers/net/ethernet/amd/Kconfig
index f8cc8925161c..b39c6f3e1eda 100644
--- a/drivers/net/ethernet/amd/Kconfig
+++ b/drivers/net/ethernet/amd/Kconfig
@@ -56,7 +56,7 @@ config LANCE
config PCNET32
tristate "AMD PCnet32 PCI support"
- depends on PCI
+ depends on PCI && HAS_IOPORT
select CRC32
select MII
help
@@ -122,7 +122,7 @@ config MVME147_NET
config PCMCIA_NMCLAN
tristate "New Media PCMCIA support"
- depends on PCMCIA
+ depends on PCMCIA && HAS_IOPORT
help
Say Y here if you intend to attach a New Media Ethernet or LiveWire
PCMCIA (PC-card) Ethernet card to your computer.
diff --git a/drivers/net/ethernet/fujitsu/Kconfig b/drivers/net/ethernet/fujitsu/Kconfig
index 0a1400cb410a..06a28bce5d27 100644
--- a/drivers/net/ethernet/fujitsu/Kconfig
+++ b/drivers/net/ethernet/fujitsu/Kconfig
@@ -18,7 +18,7 @@ if NET_VENDOR_FUJITSU
config PCMCIA_FMVJ18X
tristate "Fujitsu FMV-J18x PCMCIA support"
- depends on PCMCIA
+ depends on PCMCIA && HAS_IOPORT
select CRC32
help
Say Y here if you intend to attach a Fujitsu FMV-J18x or compatible
diff --git a/drivers/net/ethernet/intel/Kconfig b/drivers/net/ethernet/intel/Kconfig
index 9bc0a9519899..f48289a82a16 100644
--- a/drivers/net/ethernet/intel/Kconfig
+++ b/drivers/net/ethernet/intel/Kconfig
@@ -41,7 +41,7 @@ config E100
config E1000
tristate "Intel(R) PRO/1000 Gigabit Ethernet support"
- depends on PCI
+ depends on PCI && HAS_IOPORT
help
This driver supports Intel(R) PRO/1000 gigabit ethernet family of
adapters. For more information on how to identify your adapter, go
diff --git a/drivers/net/ethernet/sis/Kconfig b/drivers/net/ethernet/sis/Kconfig
index 775d76d9890e..7e498bdbca73 100644
--- a/drivers/net/ethernet/sis/Kconfig
+++ b/drivers/net/ethernet/sis/Kconfig
@@ -19,7 +19,7 @@ if NET_VENDOR_SIS
config SIS900
tristate "SiS 900/7016 PCI Fast Ethernet Adapter support"
- depends on PCI
+ depends on PCI && HAS_IOPORT
select CRC32
select MII
help
@@ -35,7 +35,7 @@ config SIS900
config SIS190
tristate "SiS190/SiS191 gigabit ethernet support"
- depends on PCI
+ depends on PCI && HAS_IOPORT
select CRC32
select MII
help
diff --git a/drivers/net/ethernet/smsc/Kconfig b/drivers/net/ethernet/smsc/Kconfig
index 5f22a8a4d27b..13ce9086a9ca 100644
--- a/drivers/net/ethernet/smsc/Kconfig
+++ b/drivers/net/ethernet/smsc/Kconfig
@@ -54,7 +54,7 @@ config SMC91X
config PCMCIA_SMC91C92
tristate "SMC 91Cxx PCMCIA support"
- depends on PCMCIA
+ depends on PCMCIA && HAS_IOPORT
select CRC32
select MII
help
diff --git a/drivers/net/ethernet/ti/Kconfig b/drivers/net/ethernet/ti/Kconfig
index fce06663e1e1..20068acce9fe 100644
--- a/drivers/net/ethernet/ti/Kconfig
+++ b/drivers/net/ethernet/ti/Kconfig
@@ -161,7 +161,7 @@ config TI_KEYSTONE_NETCP_ETHSS
config TLAN
tristate "TI ThunderLAN support"
- depends on (PCI || EISA)
+ depends on (PCI || EISA) && HAS_IOPORT
help
If you have a PCI Ethernet network card based on the ThunderLAN chip
which is supported by this driver, say Y here.
diff --git a/drivers/net/ethernet/via/Kconfig b/drivers/net/ethernet/via/Kconfig
index da287ef65be7..00773f5e4d7e 100644
--- a/drivers/net/ethernet/via/Kconfig
+++ b/drivers/net/ethernet/via/Kconfig
@@ -20,6 +20,7 @@ config VIA_RHINE
tristate "VIA Rhine support"
depends on PCI || (OF_IRQ && GENERIC_PCI_IOMAP)
depends on PCI || ARCH_VT8500 || COMPILE_TEST
+ depends on HAS_IOPORT
depends on HAS_DMA
select CRC32
select MII
diff --git a/drivers/net/ethernet/xircom/Kconfig b/drivers/net/ethernet/xircom/Kconfig
index 7497b9bea511..bfbdcf758afb 100644
--- a/drivers/net/ethernet/xircom/Kconfig
+++ b/drivers/net/ethernet/xircom/Kconfig
@@ -19,7 +19,7 @@ if NET_VENDOR_XIRCOM
config PCMCIA_XIRC2PS
tristate "Xircom 16-bit PCMCIA support"
- depends on PCMCIA
+ depends on PCMCIA && HAS_IOPORT
help
Say Y here if you intend to attach a Xircom 16-bit PCMCIA (PC-card)
Ethernet or Fast Ethernet card to your computer.
diff --git a/drivers/net/fddi/defxx.c b/drivers/net/fddi/defxx.c
index 1fef8a9b1a0f..0fbbb7286008 100644
--- a/drivers/net/fddi/defxx.c
+++ b/drivers/net/fddi/defxx.c
@@ -254,7 +254,7 @@ static const char version[] =
#define DFX_BUS_TC(dev) 0
#endif
-#if defined(CONFIG_EISA) || defined(CONFIG_PCI)
+#ifdef CONFIG_HAS_IOPORT
#define dfx_use_mmio bp->mmio
#else
#define dfx_use_mmio true
diff --git a/drivers/net/hamradio/Kconfig b/drivers/net/hamradio/Kconfig
index a94c7bd5db2e..887c61971841 100644
--- a/drivers/net/hamradio/Kconfig
+++ b/drivers/net/hamradio/Kconfig
@@ -83,7 +83,7 @@ config SCC_TRXECHO
config BAYCOM_SER_FDX
tristate "BAYCOM ser12 fullduplex driver for AX.25"
- depends on AX25 && !S390
+ depends on AX25 && HAS_IOPORT
select CRC_CCITT
help
This is one of two drivers for Baycom style simple amateur radio
@@ -103,7 +103,7 @@ config BAYCOM_SER_FDX
config BAYCOM_SER_HDX
tristate "BAYCOM ser12 halfduplex driver for AX.25"
- depends on AX25 && !S390
+ depends on AX25 && HAS_IOPORT
select CRC_CCITT
help
This is one of two drivers for Baycom style simple amateur radio
@@ -151,7 +151,7 @@ config BAYCOM_EPP
config YAM
tristate "YAM driver for AX.25"
- depends on AX25 && !S390
+ depends on AX25 && HAS_IOPORT
help
The YAM is a modem for packet radio which connects to the serial
port and includes some of the functions of a Terminal Node
diff --git a/drivers/net/wan/Kconfig b/drivers/net/wan/Kconfig
index dcb069dde66b..417e2c2d349d 100644
--- a/drivers/net/wan/Kconfig
+++ b/drivers/net/wan/Kconfig
@@ -178,7 +178,7 @@ config C101
config FARSYNC
tristate "FarSync T-Series support"
- depends on HDLC && PCI
+ depends on HDLC && PCI && HAS_IOPORT
help
Support for the FarSync T-Series X.21 (and V.35/V.24) cards by
FarSite Communications Ltd.
diff --git a/net/ax25/Kconfig b/net/ax25/Kconfig
index d3a9843a043d..f769e8f4bd02 100644
--- a/net/ax25/Kconfig
+++ b/net/ax25/Kconfig
@@ -4,7 +4,7 @@
#
menuconfig HAMRADIO
- depends on NET && !S390
+ depends on NET
bool "Amateur Radio support"
help
If you want to connect your Linux box to an amateur radio, answer Y
--
2.39.2
In a future patch HAS_IOPORT=n will result in inb()/outb() and friends
not being declared. As PC style parport uses these functions we need to
handle this dependency.
Co-developed-by: Arnd Bergmann <[email protected]>
Signed-off-by: Arnd Bergmann <[email protected]>
Signed-off-by: Niklas Schnelle <[email protected]>
---
Note: The HAS_IOPORT Kconfig option was added in v6.4-rc1 so
per-subsystem patches may be applied independently
drivers/parport/Kconfig | 3 ++-
include/linux/parport.h | 2 +-
2 files changed, 3 insertions(+), 2 deletions(-)
diff --git a/drivers/parport/Kconfig b/drivers/parport/Kconfig
index 5561362224e2..631c193fe42c 100644
--- a/drivers/parport/Kconfig
+++ b/drivers/parport/Kconfig
@@ -42,7 +42,8 @@ if PARPORT
config PARPORT_PC
tristate "PC-style hardware"
- depends on ARCH_MIGHT_HAVE_PC_PARPORT || (PCI && !S390)
+ depends on ARCH_MIGHT_HAVE_PC_PARPORT || PCI
+ depends on HAS_IOPORT
help
You should say Y here if you have a PC-style parallel port. All
IBM PC compatible computers and some Alphas have PC-style
diff --git a/include/linux/parport.h b/include/linux/parport.h
index a0bc9e0267b7..fff39bc30629 100644
--- a/include/linux/parport.h
+++ b/include/linux/parport.h
@@ -514,7 +514,7 @@ extern int parport_device_proc_register(struct pardevice *device);
extern int parport_device_proc_unregister(struct pardevice *device);
/* If PC hardware is the only type supported, we can optimise a bit. */
-#if !defined(CONFIG_PARPORT_NOT_PC)
+#if !defined(CONFIG_PARPORT_NOT_PC) && defined(CONFIG_PARPORT_PC)
#include <linux/parport_pc.h>
#define parport_write_data(p,x) parport_pc_write_data(p,x)
--
2.39.2
In a future patch HAS_IOPORT=n will result in inb()/outb() and friends
not being declared. We thus need to add HAS_IOPORT as dependency for
those drivers using them.
Acked-by: Pavel Machek <[email protected]>
Co-developed-by: Arnd Bergmann <[email protected]>
Signed-off-by: Arnd Bergmann <[email protected]>
Signed-off-by: Niklas Schnelle <[email protected]>
---
Note: The HAS_IOPORT Kconfig option was added in v6.4-rc1 so
per-subsystem patches may be applied independently
drivers/leds/Kconfig | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
index 2c5fdf848210..6573a4473fe5 100644
--- a/drivers/leds/Kconfig
+++ b/drivers/leds/Kconfig
@@ -676,7 +676,7 @@ config LEDS_LM355x
config LEDS_OT200
tristate "LED support for the Bachmann OT200"
- depends on LEDS_CLASS && HAS_IOMEM && (X86_32 || COMPILE_TEST)
+ depends on LEDS_CLASS && HAS_IOPORT && (X86_32 || COMPILE_TEST)
help
This option enables support for the LEDs on the Bachmann OT200.
Say Y to enable LEDs on the Bachmann OT200.
--
2.39.2
In a future patch HAS_IOPORT=n will result in inb()/outb() and friends
not being declared. We thus need to guard sections of code calling them
as alternative access methods with CONFIG_HAS_IOPORT checks. For
uhci-hcd there are a lot of I/O port uses that do have MMIO alternatives
all selected by uhci_has_pci_registers() so this can be handled by
UHCI_IN/OUT macros and making uhci_has_pci_registers() constant 0 if
CONFIG_HAS_IOPORT is unset.
Co-developed-by: Arnd Bergmann <[email protected]>
Signed-off-by: Arnd Bergmann <[email protected]>
Signed-off-by: Niklas Schnelle <[email protected]>
---
Note: The HAS_IOPORT Kconfig option was added in v6.4-rc1 so
per-subsystem patches may be applied independently
drivers/usb/host/uhci-hcd.c | 2 +-
drivers/usb/host/uhci-hcd.h | 36 +++++++++++++++++++++++-------------
2 files changed, 24 insertions(+), 14 deletions(-)
diff --git a/drivers/usb/host/uhci-hcd.c b/drivers/usb/host/uhci-hcd.c
index 7cdc2fa7c28f..fd2408b553cf 100644
--- a/drivers/usb/host/uhci-hcd.c
+++ b/drivers/usb/host/uhci-hcd.c
@@ -841,7 +841,7 @@ static int uhci_count_ports(struct usb_hcd *hcd)
static const char hcd_name[] = "uhci_hcd";
-#ifdef CONFIG_USB_PCI
+#if defined(CONFIG_USB_PCI) && defined(CONFIG_HAS_IOPORT)
#include "uhci-pci.c"
#define PCI_DRIVER uhci_pci_driver
#endif
diff --git a/drivers/usb/host/uhci-hcd.h b/drivers/usb/host/uhci-hcd.h
index 0688c3e5bfe2..c77705d03ed0 100644
--- a/drivers/usb/host/uhci-hcd.h
+++ b/drivers/usb/host/uhci-hcd.h
@@ -505,41 +505,49 @@ static inline bool uhci_is_aspeed(const struct uhci_hcd *uhci)
* we use memory mapped registers.
*/
+#ifdef CONFIG_HAS_IOPORT
+#define UHCI_IN(x) x
+#define UHCI_OUT(x) x
+#else
+#define UHCI_IN(x) 0
+#define UHCI_OUT(x)
+#endif
+
#ifndef CONFIG_USB_UHCI_SUPPORT_NON_PCI_HC
/* Support PCI only */
static inline u32 uhci_readl(const struct uhci_hcd *uhci, int reg)
{
- return inl(uhci->io_addr + reg);
+ return UHCI_IN(inl(uhci->io_addr + reg));
}
static inline void uhci_writel(const struct uhci_hcd *uhci, u32 val, int reg)
{
- outl(val, uhci->io_addr + reg);
+ UHCI_OUT(outl(val, uhci->io_addr + reg));
}
static inline u16 uhci_readw(const struct uhci_hcd *uhci, int reg)
{
- return inw(uhci->io_addr + reg);
+ return UHCI_IN(inw(uhci->io_addr + reg));
}
static inline void uhci_writew(const struct uhci_hcd *uhci, u16 val, int reg)
{
- outw(val, uhci->io_addr + reg);
+ UHCI_OUT(outw(val, uhci->io_addr + reg));
}
static inline u8 uhci_readb(const struct uhci_hcd *uhci, int reg)
{
- return inb(uhci->io_addr + reg);
+ return UHCI_IN(inb(uhci->io_addr + reg));
}
static inline void uhci_writeb(const struct uhci_hcd *uhci, u8 val, int reg)
{
- outb(val, uhci->io_addr + reg);
+ UHCI_OUT(outb(val, uhci->io_addr + reg));
}
#else
/* Support non-PCI host controllers */
-#ifdef CONFIG_USB_PCI
+#if defined(CONFIG_USB_PCI) && defined(HAS_IOPORT)
/* Support PCI and non-PCI host controllers */
#define uhci_has_pci_registers(u) ((u)->io_addr != 0)
#else
@@ -587,7 +595,7 @@ static inline int uhci_aspeed_reg(unsigned int reg)
static inline u32 uhci_readl(const struct uhci_hcd *uhci, int reg)
{
if (uhci_has_pci_registers(uhci))
- return inl(uhci->io_addr + reg);
+ return UHCI_IN(inl(uhci->io_addr + reg));
else if (uhci_is_aspeed(uhci))
return readl(uhci->regs + uhci_aspeed_reg(reg));
#ifdef CONFIG_USB_UHCI_BIG_ENDIAN_MMIO
@@ -601,7 +609,7 @@ static inline u32 uhci_readl(const struct uhci_hcd *uhci, int reg)
static inline void uhci_writel(const struct uhci_hcd *uhci, u32 val, int reg)
{
if (uhci_has_pci_registers(uhci))
- outl(val, uhci->io_addr + reg);
+ UHCI_OUT(outl(val, uhci->io_addr + reg));
else if (uhci_is_aspeed(uhci))
writel(val, uhci->regs + uhci_aspeed_reg(reg));
#ifdef CONFIG_USB_UHCI_BIG_ENDIAN_MMIO
@@ -615,7 +623,7 @@ static inline void uhci_writel(const struct uhci_hcd *uhci, u32 val, int reg)
static inline u16 uhci_readw(const struct uhci_hcd *uhci, int reg)
{
if (uhci_has_pci_registers(uhci))
- return inw(uhci->io_addr + reg);
+ return UHCI_IN(inw(uhci->io_addr + reg));
else if (uhci_is_aspeed(uhci))
return readl(uhci->regs + uhci_aspeed_reg(reg));
#ifdef CONFIG_USB_UHCI_BIG_ENDIAN_MMIO
@@ -629,7 +637,7 @@ static inline u16 uhci_readw(const struct uhci_hcd *uhci, int reg)
static inline void uhci_writew(const struct uhci_hcd *uhci, u16 val, int reg)
{
if (uhci_has_pci_registers(uhci))
- outw(val, uhci->io_addr + reg);
+ UHCI_OUT(outw(val, uhci->io_addr + reg));
else if (uhci_is_aspeed(uhci))
writel(val, uhci->regs + uhci_aspeed_reg(reg));
#ifdef CONFIG_USB_UHCI_BIG_ENDIAN_MMIO
@@ -643,7 +651,7 @@ static inline void uhci_writew(const struct uhci_hcd *uhci, u16 val, int reg)
static inline u8 uhci_readb(const struct uhci_hcd *uhci, int reg)
{
if (uhci_has_pci_registers(uhci))
- return inb(uhci->io_addr + reg);
+ return UHCI_IN(inb(uhci->io_addr + reg));
else if (uhci_is_aspeed(uhci))
return readl(uhci->regs + uhci_aspeed_reg(reg));
#ifdef CONFIG_USB_UHCI_BIG_ENDIAN_MMIO
@@ -657,7 +665,7 @@ static inline u8 uhci_readb(const struct uhci_hcd *uhci, int reg)
static inline void uhci_writeb(const struct uhci_hcd *uhci, u8 val, int reg)
{
if (uhci_has_pci_registers(uhci))
- outb(val, uhci->io_addr + reg);
+ UHCI_OUT(outb(val, uhci->io_addr + reg));
else if (uhci_is_aspeed(uhci))
writel(val, uhci->regs + uhci_aspeed_reg(reg));
#ifdef CONFIG_USB_UHCI_BIG_ENDIAN_MMIO
@@ -668,6 +676,8 @@ static inline void uhci_writeb(const struct uhci_hcd *uhci, u8 val, int reg)
writeb(val, uhci->regs + reg);
}
#endif /* CONFIG_USB_UHCI_SUPPORT_NON_PCI_HC */
+#undef UHCI_IN
+#undef UHCI_OUT
/*
* The GRLIB GRUSBHC controller can use big endian format for its descriptors.
--
2.39.2
In a future patch HAS_IOPORT=n will result in inb()/outb() and friends
not being declared. We thus need to add HAS_IOPORT as dependency for
those drivers using them.
Co-developed-by: Arnd Bergmann <[email protected]>
Signed-off-by: Arnd Bergmann <[email protected]>
Signed-off-by: Niklas Schnelle <[email protected]>
---
Note: The HAS_IOPORT Kconfig option was added in v6.4-rc1 so
per-subsystem patches may be applied independently
drivers/usb/host/Kconfig | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index c170672f847e..4448d0ab06f0 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -376,7 +376,7 @@ config USB_ISP116X_HCD
config USB_ISP1362_HCD
tristate "ISP1362 HCD support"
- depends on HAS_IOMEM
+ depends on HAS_IOPORT
depends on COMPILE_TEST # nothing uses this
help
Supports the Philips ISP1362 chip as a host controller
@@ -578,7 +578,7 @@ endif # USB_OHCI_HCD
config USB_UHCI_HCD
tristate "UHCI HCD (most Intel and VIA) support"
- depends on USB_PCI || USB_UHCI_SUPPORT_NON_PCI_HC
+ depends on (USB_PCI && HAS_IOPORT) || USB_UHCI_SUPPORT_NON_PCI_HC
help
The Universal Host Controller Interface is a standard by Intel for
accessing the USB hardware in the PC (which is also called the USB
--
2.39.2
In a future patch HAS_IOPORT=n will result in inb()/outb() and friends
not being declared. We thus need to add HAS_IOPORT as dependency for
those drivers using them.
Co-developed-by: Arnd Bergmann <[email protected]>
Signed-off-by: Arnd Bergmann <[email protected]>
Signed-off-by: Niklas Schnelle <[email protected]>
---
Note: The HAS_IOPORT Kconfig option was added in v6.4-rc1 so
per-subsystem patches may be applied independently
drivers/rtc/Kconfig | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig
index 753872408615..9ae082b14c44 100644
--- a/drivers/rtc/Kconfig
+++ b/drivers/rtc/Kconfig
@@ -956,6 +956,7 @@ comment "Platform RTC drivers"
config RTC_DRV_CMOS
tristate "PC-style 'CMOS'"
depends on X86 || ARM || PPC || MIPS || SPARC64
+ depends on HAS_IOPORT
default y if X86
select RTC_MC146818_LIB
help
@@ -976,6 +977,7 @@ config RTC_DRV_CMOS
config RTC_DRV_ALPHA
bool "Alpha PC-style CMOS"
depends on ALPHA
+ depends on HAS_IOPORT
select RTC_MC146818_LIB
default y
help
@@ -1193,7 +1195,7 @@ config RTC_DRV_MSM6242
config RTC_DRV_BQ4802
tristate "TI BQ4802"
- depends on HAS_IOMEM
+ depends on HAS_IOMEM && HAS_IOPORT
help
If you say Y here you will get support for the TI
BQ4802 RTC chip.
--
2.39.2
On Tue, May 16, 2023 at 12:59:59PM +0200, Niklas Schnelle wrote:
> In a future patch HAS_IOPORT=n will result in inb()/outb() and friends
> not being declared. We thus need to add this dependency and ifdef
> sections of code using inb()/outb() as alternative access methods.
>
> Co-developed-by: Arnd Bergmann <[email protected]>
> Signed-off-by: Arnd Bergmann <[email protected]>
> Acked-by: Corey Minyard <[email protected]> # IPMI
> Reviewed-by: Jarkko Sakkinen <[email protected]>
> Signed-off-by: Niklas Schnelle <[email protected]>
> ---
> Note: The HAS_IOPORT Kconfig option was added in v6.4-rc1 so
> per-subsystem patches may be applied independently
>
> drivers/char/Kconfig | 3 ++-
> drivers/char/ipmi/Makefile | 11 ++++-------
> drivers/char/ipmi/ipmi_si_intf.c | 3 ++-
> drivers/char/ipmi/ipmi_si_pci.c | 3 +++
> drivers/char/tpm/Kconfig | 1 +
> drivers/char/tpm/tpm_infineon.c | 16 ++++++++++++----
> drivers/char/tpm/tpm_tis_core.c | 19 ++++++++-----------
> 7 files changed, 32 insertions(+), 24 deletions(-)
TPM and IPMI patches go through different git trees, so odds are you are
going to have to split this patch in 2.
thanks,
greg k-h
In a future patch HAS_IOPORT=n will result in inb()/outb() and friends
not being declared. We thus need to add HAS_IOPORT as dependency for
those drivers using them.
Co-developed-by: Arnd Bergmann <[email protected]>
Signed-off-by: Arnd Bergmann <[email protected]>
Signed-off-by: Niklas Schnelle <[email protected]>
---
Note: The HAS_IOPORT Kconfig option was added in v6.4-rc1 so
per-subsystem patches may be applied independently
drivers/message/fusion/Kconfig | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/message/fusion/Kconfig b/drivers/message/fusion/Kconfig
index a3d0288fd0e2..88a6e506a942 100644
--- a/drivers/message/fusion/Kconfig
+++ b/drivers/message/fusion/Kconfig
@@ -2,7 +2,7 @@
menuconfig FUSION
bool "Fusion MPT device support"
- depends on PCI
+ depends on PCI && HAS_IOPORT
help
Say Y here to get to see options for Fusion Message
Passing Technology (MPT) drivers.
--
2.39.2
In a future patch HAS_IOPORT=n will result in inb()/outb() and friends
not being declared. SPEAKUP_SERIALIO thus needs to depend on HAS_IOPORT.
Reviewed-by: Samuel Thibault <[email protected]>
Co-developed-by: Arnd Bergmann <[email protected]>
Signed-off-by: Arnd Bergmann <[email protected]>
Signed-off-by: Niklas Schnelle <[email protected]>
---
Note: The HAS_IOPORT Kconfig option was added in v6.4-rc1 so
per-subsystem patches may be applied independently
drivers/accessibility/speakup/Kconfig | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/accessibility/speakup/Kconfig b/drivers/accessibility/speakup/Kconfig
index 07ecbbde0384..e84fb617acc4 100644
--- a/drivers/accessibility/speakup/Kconfig
+++ b/drivers/accessibility/speakup/Kconfig
@@ -46,6 +46,7 @@ if SPEAKUP
config SPEAKUP_SERIALIO
def_bool y
depends on ISA || COMPILE_TEST
+ depends on HAS_IOPORT
config SPEAKUP_SYNTH_ACNTSA
tristate "Accent SA synthesizer support"
--
2.39.2
On Tue, 2023-05-16 at 13:06 +0200, Paul Menzel wrote:
> Dear Niklas,
>
>
> Am 16.05.23 um 12:59 schrieb Niklas Schnelle:
>
> […]
>
> There is a small typo in the commit message summary/title: impi → ipmi.
>
>
> Kind regards
>
> Paul
>
Good catch. I fixed it locally now. Let's see if we need a v5 anyway or
if this can be changed on applying the patch.
Thanks,
Niklas
In a future patch HAS_IOPORT=n will result in inb()/outb() and friends
not being declared. In the pci-quirks case the I/O port acceses are
used in the quirks for several AMD south bridges. Move unrelated
ASMEDIA quirks out of the way and introduce an additional config option
for the AMD quirks that depends on HAS_IOPORT.
Co-developed-by: Arnd Bergmann <[email protected]>
Signed-off-by: Arnd Bergmann <[email protected]>
Signed-off-by: Niklas Schnelle <[email protected]>
---
Note: The HAS_IOPORT Kconfig option was added in v6.4-rc1 so
per-subsystem patches may be applied independently
drivers/usb/Kconfig | 10 +++
drivers/usb/core/hcd-pci.c | 2 +
drivers/usb/host/pci-quirks.c | 125 ++++++++++++++++++----------------
drivers/usb/host/pci-quirks.h | 30 ++++++--
4 files changed, 101 insertions(+), 66 deletions(-)
diff --git a/drivers/usb/Kconfig b/drivers/usb/Kconfig
index 7f33bcc315f2..765093112ed8 100644
--- a/drivers/usb/Kconfig
+++ b/drivers/usb/Kconfig
@@ -91,6 +91,16 @@ config USB_PCI
If you have such a device you may say N here and PCI related code
will not be built in the USB driver.
+config USB_PCI_AMD
+ bool "AMD PCI USB host support"
+ depends on HAS_IOPORT
+ default X86 || MACH_LOONGSON64 || PPC_PASEMI
+ help
+ Enable workarounds for USB implementation quirks in SB600/SB700/SB800
+ and later south bridge implementations. These are common on x86 PCs
+ with AMD CPUs but rarely used elsewhere, with the exception of a few
+ powerpc and mips desktop machines.
+
if USB
source "drivers/usb/core/Kconfig"
diff --git a/drivers/usb/core/hcd-pci.c b/drivers/usb/core/hcd-pci.c
index ab2f3737764e..85a0aeae85cd 100644
--- a/drivers/usb/core/hcd-pci.c
+++ b/drivers/usb/core/hcd-pci.c
@@ -206,8 +206,10 @@ int usb_hcd_pci_probe(struct pci_dev *dev, const struct hc_driver *driver)
goto free_irq_vectors;
}
+#ifdef CONFIG_USB_PCI_AMD
hcd->amd_resume_bug = (usb_hcd_amd_remote_wakeup_quirk(dev) &&
driver->flags & (HCD_USB11 | HCD_USB3)) ? 1 : 0;
+#endif /* CONFIG_USB_PCI_AMD */
if (driver->flags & HCD_MEMORY) {
/* EHCI, OHCI */
diff --git a/drivers/usb/host/pci-quirks.c b/drivers/usb/host/pci-quirks.c
index 2665832f9add..e0612f909fad 100644
--- a/drivers/usb/host/pci-quirks.c
+++ b/drivers/usb/host/pci-quirks.c
@@ -60,6 +60,23 @@
#define EHCI_USBLEGCTLSTS 4 /* legacy control/status */
#define EHCI_USBLEGCTLSTS_SOOE (1 << 13) /* SMI on ownership change */
+/* ASMEDIA quirk use */
+#define ASMT_DATA_WRITE0_REG 0xF8
+#define ASMT_DATA_WRITE1_REG 0xFC
+#define ASMT_CONTROL_REG 0xE0
+#define ASMT_CONTROL_WRITE_BIT 0x02
+#define ASMT_WRITEREG_CMD 0x10423
+#define ASMT_FLOWCTL_ADDR 0xFA30
+#define ASMT_FLOWCTL_DATA 0xBA
+#define ASMT_PSEUDO_DATA 0
+
+/* Intel quirk use */
+#define USB_INTEL_XUSB2PR 0xD0
+#define USB_INTEL_USB2PRM 0xD4
+#define USB_INTEL_USB3_PSSEN 0xD8
+#define USB_INTEL_USB3PRM 0xDC
+
+#ifdef CONFIG_USB_PCI_AMD
/* AMD quirk use */
#define AB_REG_BAR_LOW 0xe0
#define AB_REG_BAR_HIGH 0xe1
@@ -93,21 +110,6 @@
#define NB_PIF0_PWRDOWN_0 0x01100012
#define NB_PIF0_PWRDOWN_1 0x01100013
-#define USB_INTEL_XUSB2PR 0xD0
-#define USB_INTEL_USB2PRM 0xD4
-#define USB_INTEL_USB3_PSSEN 0xD8
-#define USB_INTEL_USB3PRM 0xDC
-
-/* ASMEDIA quirk use */
-#define ASMT_DATA_WRITE0_REG 0xF8
-#define ASMT_DATA_WRITE1_REG 0xFC
-#define ASMT_CONTROL_REG 0xE0
-#define ASMT_CONTROL_WRITE_BIT 0x02
-#define ASMT_WRITEREG_CMD 0x10423
-#define ASMT_FLOWCTL_ADDR 0xFA30
-#define ASMT_FLOWCTL_DATA 0xBA
-#define ASMT_PSEUDO_DATA 0
-
/*
* amd_chipset_gen values represent AMD different chipset generations
*/
@@ -458,50 +460,6 @@ void usb_amd_quirk_pll_disable(void)
}
EXPORT_SYMBOL_GPL(usb_amd_quirk_pll_disable);
-static int usb_asmedia_wait_write(struct pci_dev *pdev)
-{
- unsigned long retry_count;
- unsigned char value;
-
- for (retry_count = 1000; retry_count > 0; --retry_count) {
-
- pci_read_config_byte(pdev, ASMT_CONTROL_REG, &value);
-
- if (value == 0xff) {
- dev_err(&pdev->dev, "%s: check_ready ERROR", __func__);
- return -EIO;
- }
-
- if ((value & ASMT_CONTROL_WRITE_BIT) == 0)
- return 0;
-
- udelay(50);
- }
-
- dev_warn(&pdev->dev, "%s: check_write_ready timeout", __func__);
- return -ETIMEDOUT;
-}
-
-void usb_asmedia_modifyflowcontrol(struct pci_dev *pdev)
-{
- if (usb_asmedia_wait_write(pdev) != 0)
- return;
-
- /* send command and address to device */
- pci_write_config_dword(pdev, ASMT_DATA_WRITE0_REG, ASMT_WRITEREG_CMD);
- pci_write_config_dword(pdev, ASMT_DATA_WRITE1_REG, ASMT_FLOWCTL_ADDR);
- pci_write_config_byte(pdev, ASMT_CONTROL_REG, ASMT_CONTROL_WRITE_BIT);
-
- if (usb_asmedia_wait_write(pdev) != 0)
- return;
-
- /* send data to device */
- pci_write_config_dword(pdev, ASMT_DATA_WRITE0_REG, ASMT_FLOWCTL_DATA);
- pci_write_config_dword(pdev, ASMT_DATA_WRITE1_REG, ASMT_PSEUDO_DATA);
- pci_write_config_byte(pdev, ASMT_CONTROL_REG, ASMT_CONTROL_WRITE_BIT);
-}
-EXPORT_SYMBOL_GPL(usb_asmedia_modifyflowcontrol);
-
void usb_amd_quirk_pll_enable(void)
{
usb_amd_quirk_pll(0);
@@ -630,7 +588,53 @@ bool usb_amd_pt_check_port(struct device *device, int port)
return !(value & BIT(port_shift));
}
EXPORT_SYMBOL_GPL(usb_amd_pt_check_port);
+#endif /* CONFIG_USB_PCI_AMD */
+static int usb_asmedia_wait_write(struct pci_dev *pdev)
+{
+ unsigned long retry_count;
+ unsigned char value;
+
+ for (retry_count = 1000; retry_count > 0; --retry_count) {
+
+ pci_read_config_byte(pdev, ASMT_CONTROL_REG, &value);
+
+ if (value == 0xff) {
+ dev_err(&pdev->dev, "%s: check_ready ERROR", __func__);
+ return -EIO;
+ }
+
+ if ((value & ASMT_CONTROL_WRITE_BIT) == 0)
+ return 0;
+
+ udelay(50);
+ }
+
+ dev_warn(&pdev->dev, "%s: check_write_ready timeout", __func__);
+ return -ETIMEDOUT;
+}
+
+void usb_asmedia_modifyflowcontrol(struct pci_dev *pdev)
+{
+ if (usb_asmedia_wait_write(pdev) != 0)
+ return;
+
+ /* send command and address to device */
+ pci_write_config_dword(pdev, ASMT_DATA_WRITE0_REG, ASMT_WRITEREG_CMD);
+ pci_write_config_dword(pdev, ASMT_DATA_WRITE1_REG, ASMT_FLOWCTL_ADDR);
+ pci_write_config_byte(pdev, ASMT_CONTROL_REG, ASMT_CONTROL_WRITE_BIT);
+
+ if (usb_asmedia_wait_write(pdev) != 0)
+ return;
+
+ /* send data to device */
+ pci_write_config_dword(pdev, ASMT_DATA_WRITE0_REG, ASMT_FLOWCTL_DATA);
+ pci_write_config_dword(pdev, ASMT_DATA_WRITE1_REG, ASMT_PSEUDO_DATA);
+ pci_write_config_byte(pdev, ASMT_CONTROL_REG, ASMT_CONTROL_WRITE_BIT);
+}
+EXPORT_SYMBOL_GPL(usb_asmedia_modifyflowcontrol);
+
+#if defined(CONFIG_HAS_IOPORT) && defined(CONFIG_USB_UHCI_HCD)
/*
* Make sure the controller is completely inactive, unable to
* generate interrupts or do DMA.
@@ -711,6 +715,7 @@ int uhci_check_and_reset_hc(struct pci_dev *pdev, unsigned long base)
return 1;
}
EXPORT_SYMBOL_GPL(uhci_check_and_reset_hc);
+#endif /* defined(CONFIG_HAS_IOPORT && defined(CONFIG_USB_UHCI_HCD) */
static inline int io_type_enabled(struct pci_dev *pdev, unsigned int mask)
{
@@ -723,6 +728,7 @@ static inline int io_type_enabled(struct pci_dev *pdev, unsigned int mask)
static void quirk_usb_handoff_uhci(struct pci_dev *pdev)
{
+#ifdef CONFIG_HAS_IOPORT
unsigned long base = 0;
int i;
@@ -737,6 +743,7 @@ static void quirk_usb_handoff_uhci(struct pci_dev *pdev)
if (base)
uhci_check_and_reset_hc(pdev, base);
+#endif /* CONFIG_HAS_IOPORT */
}
static int mmio_resource_enabled(struct pci_dev *pdev, int idx)
diff --git a/drivers/usb/host/pci-quirks.h b/drivers/usb/host/pci-quirks.h
index e729de21fad7..8c87505f0abc 100644
--- a/drivers/usb/host/pci-quirks.h
+++ b/drivers/usb/host/pci-quirks.h
@@ -2,9 +2,10 @@
#ifndef __LINUX_USB_PCI_QUIRKS_H
#define __LINUX_USB_PCI_QUIRKS_H
-#ifdef CONFIG_USB_PCI
void uhci_reset_hc(struct pci_dev *pdev, unsigned long base);
int uhci_check_and_reset_hc(struct pci_dev *pdev, unsigned long base);
+
+#ifdef CONFIG_USB_PCI_AMD
int usb_hcd_amd_remote_wakeup_quirk(struct pci_dev *pdev);
bool usb_amd_hang_symptom_quirk(void);
bool usb_amd_prefetch_quirk(void);
@@ -12,23 +13,38 @@ void usb_amd_dev_put(void);
bool usb_amd_quirk_pll_check(void);
void usb_amd_quirk_pll_disable(void);
void usb_amd_quirk_pll_enable(void);
-void usb_asmedia_modifyflowcontrol(struct pci_dev *pdev);
-void usb_enable_intel_xhci_ports(struct pci_dev *xhci_pdev);
-void usb_disable_xhci_ports(struct pci_dev *xhci_pdev);
void sb800_prefetch(struct device *dev, int on);
bool usb_amd_pt_check_port(struct device *device, int port);
#else
-struct pci_dev;
+static inline bool usb_amd_hang_symptom_quirk(void)
+{
+ return false;
+};
+static inline bool usb_amd_prefetch_quirk(void)
+{
+ return false;
+}
+static inline bool usb_amd_quirk_pll_check(void)
+{
+ return false;
+}
static inline void usb_amd_quirk_pll_disable(void) {}
static inline void usb_amd_quirk_pll_enable(void) {}
-static inline void usb_asmedia_modifyflowcontrol(struct pci_dev *pdev) {}
static inline void usb_amd_dev_put(void) {}
-static inline void usb_disable_xhci_ports(struct pci_dev *xhci_pdev) {}
static inline void sb800_prefetch(struct device *dev, int on) {}
static inline bool usb_amd_pt_check_port(struct device *device, int port)
{
return false;
}
+#endif /* CONFIG_USB_PCI_AMD */
+
+#ifdef CONFIG_USB_PCI
+void usb_asmedia_modifyflowcontrol(struct pci_dev *pdev);
+void usb_enable_intel_xhci_ports(struct pci_dev *xhci_pdev);
+void usb_disable_xhci_ports(struct pci_dev *xhci_pdev);
+#else
+static inline void usb_asmedia_modifyflowcontrol(struct pci_dev *pdev) {}
+static inline void usb_disable_xhci_ports(struct pci_dev *xhci_pdev) {}
#endif /* CONFIG_USB_PCI */
#endif /* __LINUX_USB_PCI_QUIRKS_H */
--
2.39.2
In a future patch HAS_IOPORT=n will result in inb()/outb() and friends
not being declared. We thus need to add HAS_IOPORT as dependency for
those drivers using them. With that the !S390 dependency on ISDN can be
removed as all drivers without HAS_IOPORT requirement now build.
Co-developed-by: Arnd Bergmann <[email protected]>
Signed-off-by: Arnd Bergmann <[email protected]>
Acked-by: Jakub Kicinski <[email protected]>
Signed-off-by: Niklas Schnelle <[email protected]>
---
Note: The HAS_IOPORT Kconfig option was added in v6.4-rc1 so
per-subsystem patches may be applied independently
drivers/isdn/Kconfig | 1 -
drivers/isdn/hardware/mISDN/Kconfig | 12 ++++++------
2 files changed, 6 insertions(+), 7 deletions(-)
diff --git a/drivers/isdn/Kconfig b/drivers/isdn/Kconfig
index 2690e2c5a158..6fd1b3f84a29 100644
--- a/drivers/isdn/Kconfig
+++ b/drivers/isdn/Kconfig
@@ -6,7 +6,6 @@
menuconfig ISDN
bool "ISDN support"
depends on NET && NETDEVICES
- depends on !S390 && !UML
help
ISDN ("Integrated Services Digital Network", called RNIS in France)
is a fully digital telephone service that can be used for voice and
diff --git a/drivers/isdn/hardware/mISDN/Kconfig b/drivers/isdn/hardware/mISDN/Kconfig
index 078eeadf707a..a35bff8a93f5 100644
--- a/drivers/isdn/hardware/mISDN/Kconfig
+++ b/drivers/isdn/hardware/mISDN/Kconfig
@@ -14,7 +14,7 @@ config MISDN_HFCPCI
config MISDN_HFCMULTI
tristate "Support for HFC multiport cards (HFC-4S/8S/E1)"
- depends on PCI || CPM1
+ depends on (PCI || CPM1) && HAS_IOPORT
depends on MISDN
help
Enable support for cards with Cologne Chip AG's HFC multiport
@@ -43,7 +43,7 @@ config MISDN_HFCUSB
config MISDN_AVMFRITZ
tristate "Support for AVM FRITZ!CARD PCI"
depends on MISDN
- depends on PCI
+ depends on PCI && HAS_IOPORT
select MISDN_IPAC
help
Enable support for AVMs FRITZ!CARD PCI cards
@@ -51,7 +51,7 @@ config MISDN_AVMFRITZ
config MISDN_SPEEDFAX
tristate "Support for Sedlbauer Speedfax+"
depends on MISDN
- depends on PCI
+ depends on PCI && HAS_IOPORT
select MISDN_IPAC
select MISDN_ISAR
help
@@ -60,7 +60,7 @@ config MISDN_SPEEDFAX
config MISDN_INFINEON
tristate "Support for cards with Infineon chipset"
depends on MISDN
- depends on PCI
+ depends on PCI && HAS_IOPORT
select MISDN_IPAC
help
Enable support for cards with ISAC + HSCX, IPAC or IPAC-SX
@@ -69,14 +69,14 @@ config MISDN_INFINEON
config MISDN_W6692
tristate "Support for cards with Winbond 6692"
depends on MISDN
- depends on PCI
+ depends on PCI && HAS_IOPORT
help
Enable support for Winbond 6692 PCI chip based cards.
config MISDN_NETJET
tristate "Support for NETJet cards"
depends on MISDN
- depends on PCI
+ depends on PCI && HAS_IOPORT
depends on TTY
select MISDN_IPAC
select MISDN_HDLC
--
2.39.2
In a future patch HAS_IOPORT=n will result in inb()/outb() and friends
not being declared. We thus need to add HAS_IOPORT as dependency for
those drivers using them.
Co-developed-by: Arnd Bergmann <[email protected]>
Signed-off-by: Arnd Bergmann <[email protected]>
Signed-off-by: Niklas Schnelle <[email protected]>
---
Note: The HAS_IOPORT Kconfig option was added in v6.4-rc1 so
per-subsystem patches may be applied independently
sound/drivers/Kconfig | 3 +++
sound/isa/Kconfig | 1 +
sound/pci/Kconfig | 45 ++++++++++++++++++++++++++++++++-----------
sound/pcmcia/Kconfig | 1 +
4 files changed, 39 insertions(+), 11 deletions(-)
diff --git a/sound/drivers/Kconfig b/sound/drivers/Kconfig
index be3009746f3a..864991d8776d 100644
--- a/sound/drivers/Kconfig
+++ b/sound/drivers/Kconfig
@@ -128,6 +128,7 @@ config SND_VIRMIDI
config SND_MTPAV
tristate "MOTU MidiTimePiece AV multiport MIDI"
+ depends on HAS_IOPORT
select SND_RAWMIDI
help
To use a MOTU MidiTimePiece AV multiport MIDI adapter
@@ -152,6 +153,7 @@ config SND_MTS64
config SND_SERIAL_U16550
tristate "UART16550 serial MIDI driver"
+ depends on HAS_IOPORT
select SND_RAWMIDI
help
To include support for MIDI serial port interfaces, say Y here
@@ -185,6 +187,7 @@ config SND_SERIAL_GENERIC
config SND_MPU401
tristate "Generic MPU-401 UART driver"
+ depends on HAS_IOPORT
select SND_MPU401_UART
help
Say Y here to include support for MIDI ports compatible with
diff --git a/sound/isa/Kconfig b/sound/isa/Kconfig
index 6ffa48dd5983..f8159179e38d 100644
--- a/sound/isa/Kconfig
+++ b/sound/isa/Kconfig
@@ -23,6 +23,7 @@ menuconfig SND_ISA
bool "ISA sound devices"
depends on ISA || COMPILE_TEST
depends on ISA_DMA_API
+ depends on HAS_IOPORT
default y
help
Support for sound devices connected via the ISA bus.
diff --git a/sound/pci/Kconfig b/sound/pci/Kconfig
index 861958451ef5..787868c9e91b 100644
--- a/sound/pci/Kconfig
+++ b/sound/pci/Kconfig
@@ -26,7 +26,7 @@ config SND_ALS300
select SND_PCM
select SND_AC97_CODEC
select SND_OPL3_LIB
- depends on ZONE_DMA
+ depends on ZONE_DMA && HAS_IOPORT
help
Say 'Y' or 'M' to include support for Avance Logic ALS300/ALS300+
@@ -36,6 +36,7 @@ config SND_ALS300
config SND_ALS4000
tristate "Avance Logic ALS4000"
depends on ISA_DMA_API
+ depends on HAS_IOPORT
select SND_OPL3_LIB
select SND_MPU401_UART
select SND_PCM
@@ -51,7 +52,7 @@ config SND_ALI5451
tristate "ALi M5451 PCI Audio Controller"
select SND_MPU401_UART
select SND_AC97_CODEC
- depends on ZONE_DMA
+ depends on ZONE_DMA && HAS_IOPORT
help
Say Y here to include support for the integrated AC97 sound
device on motherboards using the ALi M5451 Audio Controller
@@ -96,6 +97,7 @@ config SND_ATIIXP_MODEM
config SND_AU8810
tristate "Aureal Advantage"
+ depends on HAS_IOPORT
select SND_MPU401_UART
select SND_AC97_CODEC
help
@@ -110,6 +112,7 @@ config SND_AU8810
config SND_AU8820
tristate "Aureal Vortex"
+ depends on HAS_IOPORT
select SND_MPU401_UART
select SND_AC97_CODEC
help
@@ -123,6 +126,7 @@ config SND_AU8820
config SND_AU8830
tristate "Aureal Vortex 2"
+ depends on HAS_IOPORT
select SND_MPU401_UART
select SND_AC97_CODEC
help
@@ -157,7 +161,7 @@ config SND_AZT3328
select SND_RAWMIDI
select SND_AC97_CODEC
select SND_TIMER
- depends on ZONE_DMA
+ depends on ZONE_DMA && HAS_IOPORT
help
Say Y here to include support for Aztech AZF3328 (PCI168)
soundcards.
@@ -193,6 +197,7 @@ config SND_BT87X_OVERCLOCK
config SND_CA0106
tristate "SB Audigy LS / Live 24bit"
+ depends on HAS_IOPORT
select SND_AC97_CODEC
select SND_RAWMIDI
select SND_VMASTER
@@ -205,6 +210,7 @@ config SND_CA0106
config SND_CMIPCI
tristate "C-Media 8338, 8738, 8768, 8770"
+ depends on HAS_IOPORT
select SND_OPL3_LIB
select SND_MPU401_UART
select SND_PCM
@@ -221,6 +227,7 @@ config SND_OXYGEN_LIB
config SND_OXYGEN
tristate "C-Media 8786, 8787, 8788 (Oxygen)"
+ depends on HAS_IOPORT
select SND_OXYGEN_LIB
select SND_PCM
select SND_MPU401_UART
@@ -246,6 +253,7 @@ config SND_OXYGEN
config SND_CS4281
tristate "Cirrus Logic (Sound Fusion) CS4281"
+ depends on HAS_IOPORT
select SND_OPL3_LIB
select SND_RAWMIDI
select SND_AC97_CODEC
@@ -257,6 +265,7 @@ config SND_CS4281
config SND_CS46XX
tristate "Cirrus Logic (Sound Fusion) CS4280/CS461x/CS462x/CS463x"
+ depends on HAS_IOPORT
select SND_RAWMIDI
select SND_AC97_CODEC
select FW_LOADER
@@ -290,6 +299,7 @@ config SND_CS5530
config SND_CS5535AUDIO
tristate "CS5535/CS5536 Audio"
depends on X86_32 || MIPS || COMPILE_TEST
+ depends on HAS_IOPORT
select SND_PCM
select SND_AC97_CODEC
help
@@ -307,6 +317,7 @@ config SND_CS5535AUDIO
config SND_CTXFI
tristate "Creative Sound Blaster X-Fi"
+ depends on HAS_IOPORT
select SND_PCM
help
If you want to use soundcards based on Creative Sound Blastr X-Fi
@@ -468,7 +479,7 @@ config SND_EMU10K1
select SND_AC97_CODEC
select SND_TIMER
select SND_SEQ_DEVICE if SND_SEQUENCER != n
- depends on ZONE_DMA
+ depends on ZONE_DMA && HAS_IOPORT
help
Say Y to include support for Sound Blaster PCI 512, Live!,
Audigy and E-MU APS/0404/1010/1212/1616/1820 soundcards.
@@ -491,7 +502,7 @@ config SND_EMU10K1X
tristate "Emu10k1X (Dell OEM Version)"
select SND_AC97_CODEC
select SND_RAWMIDI
- depends on ZONE_DMA
+ depends on ZONE_DMA && HAS_IOPORT
help
Say Y here to include support for the Dell OEM version of the
Sound Blaster Live!.
@@ -501,6 +512,7 @@ config SND_EMU10K1X
config SND_ENS1370
tristate "(Creative) Ensoniq AudioPCI 1370"
+ depends on HAS_IOPORT
select SND_RAWMIDI
select SND_PCM
help
@@ -511,6 +523,7 @@ config SND_ENS1370
config SND_ENS1371
tristate "(Creative) Ensoniq AudioPCI 1371/1373"
+ depends on HAS_IOPORT
select SND_RAWMIDI
select SND_AC97_CODEC
help
@@ -525,7 +538,7 @@ config SND_ES1938
select SND_OPL3_LIB
select SND_MPU401_UART
select SND_AC97_CODEC
- depends on ZONE_DMA
+ depends on ZONE_DMA && HAS_IOPORT
help
Say Y here to include support for soundcards based on ESS Solo-1
(ES1938, ES1946, ES1969) chips.
@@ -537,7 +550,7 @@ config SND_ES1968
tristate "ESS ES1968/1978 (Maestro-1/2/2E)"
select SND_MPU401_UART
select SND_AC97_CODEC
- depends on ZONE_DMA
+ depends on ZONE_DMA && HAS_IOPORT
help
Say Y here to include support for soundcards based on ESS Maestro
1/2/2E chips.
@@ -569,6 +582,7 @@ config SND_ES1968_RADIO
config SND_FM801
tristate "ForteMedia FM801"
+ depends on HAS_IOPORT
select SND_OPL3_LIB
select SND_MPU401_UART
select SND_AC97_CODEC
@@ -624,7 +638,7 @@ config SND_ICE1712
select SND_MPU401_UART
select SND_AC97_CODEC
select BITREVERSE
- depends on ZONE_DMA
+ depends on ZONE_DMA && HAS_IOPORT
help
Say Y here to include support for soundcards based on the
ICE1712 (Envy24) chip.
@@ -640,6 +654,7 @@ config SND_ICE1712
config SND_ICE1724
tristate "ICE/VT1724/1720 (Envy24HT/PT)"
+ depends on HAS_IOPORT
select SND_RAWMIDI
select SND_AC97_CODEC
select SND_VMASTER
@@ -712,7 +727,7 @@ config SND_LX6464ES
config SND_MAESTRO3
tristate "ESS Allegro/Maestro3"
select SND_AC97_CODEC
- depends on ZONE_DMA
+ depends on ZONE_DMA && HAS_IOPORT
help
Say Y here to include support for soundcards based on ESS Maestro 3
(Allegro) chips.
@@ -753,6 +768,7 @@ config SND_NM256
config SND_PCXHR
tristate "Digigram PCXHR"
+ depends on HAS_IOPORT
select FW_LOADER
select SND_PCM
select SND_HWDEP
@@ -764,6 +780,7 @@ config SND_PCXHR
config SND_RIPTIDE
tristate "Conexant Riptide"
+ depends on HAS_IOPORT
select FW_LOADER
select SND_OPL3_LIB
select SND_MPU401_UART
@@ -808,6 +825,7 @@ config SND_RME9652
config SND_SE6X
tristate "Studio Evolution SE6X"
depends on SND_OXYGEN=n && SND_VIRTUOSO=n # PCI ID conflict
+ depends on HAS_IOPORT
select SND_OXYGEN_LIB
select SND_PCM
select SND_MPU401_UART
@@ -830,7 +848,7 @@ config SND_SONICVIBES
select SND_OPL3_LIB
select SND_MPU401_UART
select SND_AC97_CODEC
- depends on ZONE_DMA
+ depends on ZONE_DMA && HAS_IOPORT
help
Say Y here to include support for soundcards based on the S3
SonicVibes chip.
@@ -842,7 +860,7 @@ config SND_TRIDENT
tristate "Trident 4D-Wave DX/NX; SiS 7018"
select SND_MPU401_UART
select SND_AC97_CODEC
- depends on ZONE_DMA
+ depends on ZONE_DMA && HAS_IOPORT
help
Say Y here to include support for soundcards based on Trident
4D-Wave DX/NX or SiS 7018 chips.
@@ -852,6 +870,7 @@ config SND_TRIDENT
config SND_VIA82XX
tristate "VIA 82C686A/B, 8233/8235 AC97 Controller"
+ depends on HAS_IOPORT
select SND_MPU401_UART
select SND_AC97_CODEC
help
@@ -863,6 +882,7 @@ config SND_VIA82XX
config SND_VIA82XX_MODEM
tristate "VIA 82C686A/B, 8233 based Modems"
+ depends on HAS_IOPORT
select SND_AC97_CODEC
help
Say Y here to include support for the integrated MC97 modem on
@@ -873,6 +893,7 @@ config SND_VIA82XX_MODEM
config SND_VIRTUOSO
tristate "Asus Virtuoso 66/100/200 (Xonar)"
+ depends on HAS_IOPORT
select SND_OXYGEN_LIB
select SND_PCM
select SND_MPU401_UART
@@ -889,6 +910,7 @@ config SND_VIRTUOSO
config SND_VX222
tristate "Digigram VX222"
+ depends on HAS_IOPORT
select SND_VX_LIB
help
Say Y here to include support for Digigram VX222 soundcards.
@@ -898,6 +920,7 @@ config SND_VX222
config SND_YMFPCI
tristate "Yamaha YMF724/740/744/754"
+ depends on HAS_IOPORT
select SND_OPL3_LIB
select SND_MPU401_UART
select SND_AC97_CODEC
diff --git a/sound/pcmcia/Kconfig b/sound/pcmcia/Kconfig
index 10291c43cb18..2e3dfc1ff540 100644
--- a/sound/pcmcia/Kconfig
+++ b/sound/pcmcia/Kconfig
@@ -4,6 +4,7 @@
menuconfig SND_PCMCIA
bool "PCMCIA sound devices"
depends on PCMCIA
+ depends on HAS_IOPORT
default y
help
Support for sound devices connected via the PCMCIA bus.
--
2.39.2
On Tue, May 16, 2023 at 1:01 PM Niklas Schnelle <[email protected]> wrote:
>
> In a future patch HAS_IOPORT=n will result in inb()/outb() and friends
> not being declared. We thus need to depend on HAS_IOPORT even when
> compile testing only.
>
> Co-developed-by: Arnd Bergmann <[email protected]>
> Signed-off-by: Arnd Bergmann <[email protected]>
> Signed-off-by: Niklas Schnelle <[email protected]>
Acked-by: Rafael J. Wysocki <[email protected]>
> ---
> Note: The HAS_IOPORT Kconfig option was added in v6.4-rc1 so
> per-subsystem patches may be applied independently
>
> drivers/pnp/isapnp/Kconfig | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/drivers/pnp/isapnp/Kconfig b/drivers/pnp/isapnp/Kconfig
> index d0479a563123..79bd48f1dd94 100644
> --- a/drivers/pnp/isapnp/Kconfig
> +++ b/drivers/pnp/isapnp/Kconfig
> @@ -4,7 +4,7 @@
> #
> config ISAPNP
> bool "ISA Plug and Play support"
> - depends on ISA || COMPILE_TEST
> + depends on ISA || (HAS_IOPORT && COMPILE_TEST)
> help
> Say Y here if you would like support for ISA Plug and Play devices.
> Some information is in <file:Documentation/driver-api/isapnp.rst>.
> --
> 2.39.2
>
In a future patch HAS_IOPORT=n will result in inb()/outb() and friends
not being declared. We thus need to add HAS_IOPORT as dependency for
those drivers using them.
Co-developed-by: Arnd Bergmann <[email protected]>
Signed-off-by: Arnd Bergmann <[email protected]>
Acked-by: Tzung-Bi Shih <[email protected]>
Signed-off-by: Niklas Schnelle <[email protected]>
---
Note: The HAS_IOPORT Kconfig option was added in v6.4-rc1 so
per-subsystem patches may be applied independently
drivers/platform/chrome/Kconfig | 1 +
drivers/platform/chrome/wilco_ec/Kconfig | 1 +
2 files changed, 2 insertions(+)
diff --git a/drivers/platform/chrome/Kconfig b/drivers/platform/chrome/Kconfig
index 7d82a0946e1c..7eb1cfde29b4 100644
--- a/drivers/platform/chrome/Kconfig
+++ b/drivers/platform/chrome/Kconfig
@@ -132,6 +132,7 @@ config CROS_EC_UART
config CROS_EC_LPC
tristate "ChromeOS Embedded Controller (LPC)"
depends on CROS_EC && ACPI && (X86 || COMPILE_TEST)
+ depends on HAS_IOPORT
help
If you say Y here, you get support for talking to the ChromeOS EC
over an LPC bus, including the LPC Microchip EC (MEC) variant.
diff --git a/drivers/platform/chrome/wilco_ec/Kconfig b/drivers/platform/chrome/wilco_ec/Kconfig
index 49e8530ca0ac..d1648fb099ac 100644
--- a/drivers/platform/chrome/wilco_ec/Kconfig
+++ b/drivers/platform/chrome/wilco_ec/Kconfig
@@ -3,6 +3,7 @@ config WILCO_EC
tristate "ChromeOS Wilco Embedded Controller"
depends on X86 || COMPILE_TEST
depends on ACPI && CROS_EC_LPC && LEDS_CLASS
+ depends on HAS_IOPORT
help
If you say Y here, you get support for talking to the ChromeOS
Wilco EC over an eSPI bus. This uses a simple byte-level protocol
--
2.39.2
On Tue, 2023-05-16 at 13:46 +0200, Greg Kroah-Hartman wrote:
> On Tue, May 16, 2023 at 12:59:59PM +0200, Niklas Schnelle wrote:
> > In a future patch HAS_IOPORT=n will result in inb()/outb() and friends
> > not being declared. We thus need to add this dependency and ifdef
> > sections of code using inb()/outb() as alternative access methods.
> >
> > Co-developed-by: Arnd Bergmann <[email protected]>
> > Signed-off-by: Arnd Bergmann <[email protected]>
> > Acked-by: Corey Minyard <[email protected]> # IPMI
> > Reviewed-by: Jarkko Sakkinen <[email protected]>
> > Signed-off-by: Niklas Schnelle <[email protected]>
> > ---
> > Note: The HAS_IOPORT Kconfig option was added in v6.4-rc1 so
> > per-subsystem patches may be applied independently
> >
> > drivers/char/Kconfig | 3 ++-
> > drivers/char/ipmi/Makefile | 11 ++++-------
> > drivers/char/ipmi/ipmi_si_intf.c | 3 ++-
> > drivers/char/ipmi/ipmi_si_pci.c | 3 +++
> > drivers/char/tpm/Kconfig | 1 +
> > drivers/char/tpm/tpm_infineon.c | 16 ++++++++++++----
> > drivers/char/tpm/tpm_tis_core.c | 19 ++++++++-----------
> > 7 files changed, 32 insertions(+), 24 deletions(-)
>
> TPM and IPMI patches go through different git trees, so odds are you are
> going to have to split this patch in 2.
>
> thanks,
>
> greg k-h
Ah right sorry about that. I'll split this into 3 patches between the
drivers/char/{Kconfig, ipmi/, and tpm/} changes.
Thanks,
Niklas
On Tue, May 16, 2023 at 01:00:33PM +0200, Niklas Schnelle wrote:
> Just below the removed lines par->clk_wr_offset is hard coded to 3 so
> there is no use in determining a different clock just to then ignore it
> anyway. This also removes the only I/O port use remaining in the driver
> allowing it to be built without CONFIG_HAS_IOPORT.
>
> Link: https://lore.kernel.org/all/[email protected]/
> Suggested-by: Ville Syrj?l? <[email protected]>
> Signed-off-by: Niklas Schnelle <[email protected]>
Reviewed-by: Ville Syrj?l? <[email protected]>
> ---
> Note: The HAS_IOPORT Kconfig option was added in v6.4-rc1 so
> per-subsystem patches may be applied independently
>
> drivers/video/fbdev/aty/atyfb_base.c | 5 -----
> 1 file changed, 5 deletions(-)
>
> diff --git a/drivers/video/fbdev/aty/atyfb_base.c b/drivers/video/fbdev/aty/atyfb_base.c
> index b02e4e645035..cba2b113b28b 100644
> --- a/drivers/video/fbdev/aty/atyfb_base.c
> +++ b/drivers/video/fbdev/aty/atyfb_base.c
> @@ -3498,11 +3498,6 @@ static int atyfb_setup_generic(struct pci_dev *pdev, struct fb_info *info,
> if (ret)
> goto atyfb_setup_generic_fail;
> #endif
> - if (!(aty_ld_le32(CRTC_GEN_CNTL, par) & CRTC_EXT_DISP_EN))
> - par->clk_wr_offset = (inb(R_GENMO) & 0x0CU) >> 2;
> - else
> - par->clk_wr_offset = aty_ld_8(CLOCK_CNTL, par) & 0x03U;
> -
> /* according to ATI, we should use clock 3 for acelerated mode */
> par->clk_wr_offset = 3;
>
> --
> 2.39.2
--
Ville Syrj?l?
Intel
In a future patch HAS_IOPORT=n will result in inb()/outb() and friends
not being declared. We thus need to add HAS_IOPORT as dependency for
those drivers using them.
Acked-by: Sebastian Reichel <[email protected]>
Co-developed-by: Arnd Bergmann <[email protected]>
Signed-off-by: Arnd Bergmann <[email protected]>
Signed-off-by: Niklas Schnelle <[email protected]>
---
Note: The HAS_IOPORT Kconfig option was added in v6.4-rc1 so
per-subsystem patches may be applied independently
drivers/power/reset/Kconfig | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/power/reset/Kconfig b/drivers/power/reset/Kconfig
index 8c87eeda0fec..fff07b2bd77b 100644
--- a/drivers/power/reset/Kconfig
+++ b/drivers/power/reset/Kconfig
@@ -158,6 +158,7 @@ config POWER_RESET_OXNAS
config POWER_RESET_PIIX4_POWEROFF
tristate "Intel PIIX4 power-off driver"
depends on PCI
+ depends on HAS_IOPORT
depends on MIPS || COMPILE_TEST
help
This driver supports powering off a system using the Intel PIIX4
--
2.39.2
On Tue, May 16, 2023 at 1:01 PM Niklas Schnelle <[email protected]> wrote:
> In a future patch HAS_IOPORT=n will result in inb()/outb() and friends
> not being declared. We thus need to add HAS_IOPORT as dependency for
> those drivers using them.
>
> Co-developed-by: Arnd Bergmann <[email protected]>
> Signed-off-by: Arnd Bergmann <[email protected]>
> Signed-off-by: Niklas Schnelle <[email protected]>
Reviewed-by: Linus Walleij <[email protected]>
Yours,
Linus Walleij
On 5/16/23 19:59, Niklas Schnelle wrote:
> In a future patch HAS_IOPORT=n will result in inb()/outb() and friends
> not being declared. We thus need to add HAS_IOPORT as dependency for
> those drivers using them.
>
> Co-developed-by: Arnd Bergmann <[email protected]>
> Signed-off-by: Arnd Bergmann <[email protected]>
> Acked-by: Damien Le Moal <[email protected]>
> Signed-off-by: Niklas Schnelle <[email protected]>
> ---
> Note: The HAS_IOPORT Kconfig option was added in v6.4-rc1 so
> per-subsystem patches may be applied independently
>
> drivers/ata/Kconfig | 28 ++++++++++++++--------------
> drivers/ata/ata_generic.c | 2 ++
> drivers/ata/libata-sff.c | 2 ++
> include/linux/libata.h | 2 ++
> 4 files changed, 20 insertions(+), 14 deletions(-)
>
> diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
> index 42b51c9812a0..c521cdc51f8c 100644
> --- a/drivers/ata/Kconfig
> +++ b/drivers/ata/Kconfig
> @@ -557,7 +557,7 @@ comment "PATA SFF controllers with BMDMA"
>
> config PATA_ALI
> tristate "ALi PATA support"
> - depends on PCI
> + depends on PCI && HAS_IOPORT
> select PATA_TIMINGS
> help
> This option enables support for the ALi ATA interfaces
> @@ -567,7 +567,7 @@ config PATA_ALI
>
> config PATA_AMD
> tristate "AMD/NVidia PATA support"
> - depends on PCI
> + depends on PCI && HAS_IOPORT
> select PATA_TIMINGS
> help
> This option enables support for the AMD and NVidia PATA
> @@ -585,7 +585,7 @@ config PATA_ARASAN_CF
>
> config PATA_ARTOP
> tristate "ARTOP 6210/6260 PATA support"
> - depends on PCI
> + depends on PCI && HAS_IOPORT
> help
> This option enables support for ARTOP PATA controllers.
>
> @@ -612,7 +612,7 @@ config PATA_ATP867X
>
> config PATA_CMD64X
> tristate "CMD64x PATA support"
> - depends on PCI
> + depends on PCI && HAS_IOPORT
> select PATA_TIMINGS
> help
> This option enables support for the CMD64x series chips
> @@ -659,7 +659,7 @@ config PATA_CS5536
>
> config PATA_CYPRESS
> tristate "Cypress CY82C693 PATA support (Very Experimental)"
> - depends on PCI
> + depends on PCI && HAS_IOPORT
> select PATA_TIMINGS
> help
> This option enables support for the Cypress/Contaq CY82C693
> @@ -707,7 +707,7 @@ config PATA_HPT366
>
> config PATA_HPT37X
> tristate "HPT 370/370A/371/372/374/302 PATA support"
> - depends on PCI
> + depends on PCI && HAS_IOPORT
> help
> This option enables support for the majority of the later HPT
> PATA controllers via the new ATA layer.
> @@ -716,7 +716,7 @@ config PATA_HPT37X
>
> config PATA_HPT3X2N
> tristate "HPT 371N/372N/302N PATA support"
> - depends on PCI
> + depends on PCI && HAS_IOPORT
> help
> This option enables support for the N variant HPT PATA
> controllers via the new ATA layer.
> @@ -819,7 +819,7 @@ config PATA_MPC52xx
>
> config PATA_NETCELL
> tristate "NETCELL Revolution RAID support"
> - depends on PCI
> + depends on PCI && HAS_IOPORT
> help
> This option enables support for the Netcell Revolution RAID
> PATA controller.
> @@ -855,7 +855,7 @@ config PATA_OLDPIIX
>
> config PATA_OPTIDMA
> tristate "OPTI FireStar PATA support (Very Experimental)"
> - depends on PCI
> + depends on PCI && HAS_IOPORT
> help
> This option enables DMA/PIO support for the later OPTi
> controllers found on some old motherboards and in some
> @@ -865,7 +865,7 @@ config PATA_OPTIDMA
>
> config PATA_PDC2027X
> tristate "Promise PATA 2027x support"
> - depends on PCI
> + depends on PCI && HAS_IOPORT
> help
> This option enables support for Promise PATA pdc20268 to pdc20277 host adapters.
>
> @@ -873,7 +873,7 @@ config PATA_PDC2027X
>
> config PATA_PDC_OLD
> tristate "Older Promise PATA controller support"
> - depends on PCI
> + depends on PCI && HAS_IOPORT
> help
> This option enables support for the Promise 20246, 20262, 20263,
> 20265 and 20267 adapters.
> @@ -901,7 +901,7 @@ config PATA_RDC
>
> config PATA_SC1200
> tristate "SC1200 PATA support"
> - depends on PCI && (X86_32 || COMPILE_TEST)
> + depends on PCI && (X86_32 || COMPILE_TEST) && HAS_IOPORT
> help
> This option enables support for the NatSemi/AMD SC1200 SoC
> companion chip used with the Geode processor family.
> @@ -919,7 +919,7 @@ config PATA_SCH
>
> config PATA_SERVERWORKS
> tristate "SERVERWORKS OSB4/CSB5/CSB6/HT1000 PATA support"
> - depends on PCI
> + depends on PCI && HAS_IOPORT
> help
> This option enables support for the Serverworks OSB4/CSB5/CSB6 and
> HT1000 PATA controllers, via the new ATA layer.
> @@ -1183,7 +1183,7 @@ config ATA_GENERIC
>
> config PATA_LEGACY
> tristate "Legacy ISA PATA support (Experimental)"
> - depends on (ISA || PCI)
> + depends on (ISA || PCI) && HAS_IOPORT
> select PATA_TIMINGS
> help
> This option enables support for ISA/VLB/PCI bus legacy PATA
> diff --git a/drivers/ata/ata_generic.c b/drivers/ata/ata_generic.c
> index 2f57ec00ab82..2d391d117f74 100644
> --- a/drivers/ata/ata_generic.c
> +++ b/drivers/ata/ata_generic.c
> @@ -197,8 +197,10 @@ static int ata_generic_init_one(struct pci_dev *dev, const struct pci_device_id
> if (!(command & PCI_COMMAND_IO))
> return -ENODEV;
>
> +#ifdef CONFIG_PATA_ALI
> if (dev->vendor == PCI_VENDOR_ID_AL)
> ata_pci_bmdma_clear_simplex(dev);
> +#endif /* CONFIG_PATA_ALI */
You can drop this change if...
>
> if (dev->vendor == PCI_VENDOR_ID_ATI) {
> int rc = pcim_enable_device(dev);
> diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c
> index 9d28badfe41d..80137edb7ebf 100644
> --- a/drivers/ata/libata-sff.c
> +++ b/drivers/ata/libata-sff.c
> @@ -3031,6 +3031,7 @@ EXPORT_SYMBOL_GPL(ata_bmdma_port_start32);
>
> #ifdef CONFIG_PCI
>
> +#ifdef CONFIG_HAS_IOPORT
> /**
> * ata_pci_bmdma_clear_simplex - attempt to kick device out of simplex
> * @pdev: PCI device
> @@ -3056,6 +3057,7 @@ int ata_pci_bmdma_clear_simplex(struct pci_dev *pdev)
> return 0;
> }
> EXPORT_SYMBOL_GPL(ata_pci_bmdma_clear_simplex);
> +#endif /* CONFIG_HAS_IOPORT */
...you move the #ifdef CONFIG_HAS_IOPORT inside the function as the first line
and have the #endif right before the last "return 0;" (so the function only does
return 0 for the !CONFIG_HAS_IOPORT case).
>
> static void ata_bmdma_nodma(struct ata_host *host, const char *reason)
> {
> diff --git a/include/linux/libata.h b/include/linux/libata.h
> index 311cd93377c7..90002d4a785b 100644
> --- a/include/linux/libata.h
> +++ b/include/linux/libata.h
> @@ -2012,7 +2012,9 @@ extern int ata_bmdma_port_start(struct ata_port *ap);
> extern int ata_bmdma_port_start32(struct ata_port *ap);
>
> #ifdef CONFIG_PCI
> +#ifdef CONFIG_HAS_IOPORT
> extern int ata_pci_bmdma_clear_simplex(struct pci_dev *pdev);
> +#endif /* CONFIG_HAS_IOPORT */
And then you do not need these #ifdef/endif here. Overall, a lot less of #ifdef
which I personally really dislike to see in .c files :)
> extern void ata_pci_bmdma_init(struct ata_host *host);
> extern int ata_pci_bmdma_prepare_host(struct pci_dev *pdev,
> const struct ata_port_info * const * ppi,
--
Damien Le Moal
Western Digital Research
On 5/16/23 22:18, Damien Le Moal wrote:
> On 5/16/23 19:59, Niklas Schnelle wrote:
>> In a future patch HAS_IOPORT=n will result in inb()/outb() and friends
>> not being declared. We thus need to add HAS_IOPORT as dependency for
>> those drivers using them.
>>
>> Co-developed-by: Arnd Bergmann <[email protected]>
>> Signed-off-by: Arnd Bergmann <[email protected]>
>> Acked-by: Damien Le Moal <[email protected]>
>> Signed-off-by: Niklas Schnelle <[email protected]>
>> ---
>> Note: The HAS_IOPORT Kconfig option was added in v6.4-rc1 so
>> per-subsystem patches may be applied independently
>>
>> drivers/ata/Kconfig | 28 ++++++++++++++--------------
>> drivers/ata/ata_generic.c | 2 ++
>> drivers/ata/libata-sff.c | 2 ++
>> include/linux/libata.h | 2 ++
>> 4 files changed, 20 insertions(+), 14 deletions(-)
>>
>> diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
>> index 42b51c9812a0..c521cdc51f8c 100644
>> --- a/drivers/ata/Kconfig
>> +++ b/drivers/ata/Kconfig
>> @@ -557,7 +557,7 @@ comment "PATA SFF controllers with BMDMA"
>>
>> config PATA_ALI
>> tristate "ALi PATA support"
>> - depends on PCI
>> + depends on PCI && HAS_IOPORT
>> select PATA_TIMINGS
>> help
>> This option enables support for the ALi ATA interfaces
>> @@ -567,7 +567,7 @@ config PATA_ALI
>>
>> config PATA_AMD
>> tristate "AMD/NVidia PATA support"
>> - depends on PCI
>> + depends on PCI && HAS_IOPORT
>> select PATA_TIMINGS
>> help
>> This option enables support for the AMD and NVidia PATA
>> @@ -585,7 +585,7 @@ config PATA_ARASAN_CF
>>
>> config PATA_ARTOP
>> tristate "ARTOP 6210/6260 PATA support"
>> - depends on PCI
>> + depends on PCI && HAS_IOPORT
>> help
>> This option enables support for ARTOP PATA controllers.
>>
>> @@ -612,7 +612,7 @@ config PATA_ATP867X
>>
>> config PATA_CMD64X
>> tristate "CMD64x PATA support"
>> - depends on PCI
>> + depends on PCI && HAS_IOPORT
>> select PATA_TIMINGS
>> help
>> This option enables support for the CMD64x series chips
>> @@ -659,7 +659,7 @@ config PATA_CS5536
>>
>> config PATA_CYPRESS
>> tristate "Cypress CY82C693 PATA support (Very Experimental)"
>> - depends on PCI
>> + depends on PCI && HAS_IOPORT
>> select PATA_TIMINGS
>> help
>> This option enables support for the Cypress/Contaq CY82C693
>> @@ -707,7 +707,7 @@ config PATA_HPT366
>>
>> config PATA_HPT37X
>> tristate "HPT 370/370A/371/372/374/302 PATA support"
>> - depends on PCI
>> + depends on PCI && HAS_IOPORT
>> help
>> This option enables support for the majority of the later HPT
>> PATA controllers via the new ATA layer.
>> @@ -716,7 +716,7 @@ config PATA_HPT37X
>>
>> config PATA_HPT3X2N
>> tristate "HPT 371N/372N/302N PATA support"
>> - depends on PCI
>> + depends on PCI && HAS_IOPORT
>> help
>> This option enables support for the N variant HPT PATA
>> controllers via the new ATA layer.
>> @@ -819,7 +819,7 @@ config PATA_MPC52xx
>>
>> config PATA_NETCELL
>> tristate "NETCELL Revolution RAID support"
>> - depends on PCI
>> + depends on PCI && HAS_IOPORT
>> help
>> This option enables support for the Netcell Revolution RAID
>> PATA controller.
>> @@ -855,7 +855,7 @@ config PATA_OLDPIIX
>>
>> config PATA_OPTIDMA
>> tristate "OPTI FireStar PATA support (Very Experimental)"
>> - depends on PCI
>> + depends on PCI && HAS_IOPORT
>> help
>> This option enables DMA/PIO support for the later OPTi
>> controllers found on some old motherboards and in some
>> @@ -865,7 +865,7 @@ config PATA_OPTIDMA
>>
>> config PATA_PDC2027X
>> tristate "Promise PATA 2027x support"
>> - depends on PCI
>> + depends on PCI && HAS_IOPORT
>> help
>> This option enables support for Promise PATA pdc20268 to pdc20277 host adapters.
>>
>> @@ -873,7 +873,7 @@ config PATA_PDC2027X
>>
>> config PATA_PDC_OLD
>> tristate "Older Promise PATA controller support"
>> - depends on PCI
>> + depends on PCI && HAS_IOPORT
>> help
>> This option enables support for the Promise 20246, 20262, 20263,
>> 20265 and 20267 adapters.
>> @@ -901,7 +901,7 @@ config PATA_RDC
>>
>> config PATA_SC1200
>> tristate "SC1200 PATA support"
>> - depends on PCI && (X86_32 || COMPILE_TEST)
>> + depends on PCI && (X86_32 || COMPILE_TEST) && HAS_IOPORT
>> help
>> This option enables support for the NatSemi/AMD SC1200 SoC
>> companion chip used with the Geode processor family.
>> @@ -919,7 +919,7 @@ config PATA_SCH
>>
>> config PATA_SERVERWORKS
>> tristate "SERVERWORKS OSB4/CSB5/CSB6/HT1000 PATA support"
>> - depends on PCI
>> + depends on PCI && HAS_IOPORT
>> help
>> This option enables support for the Serverworks OSB4/CSB5/CSB6 and
>> HT1000 PATA controllers, via the new ATA layer.
>> @@ -1183,7 +1183,7 @@ config ATA_GENERIC
>>
>> config PATA_LEGACY
>> tristate "Legacy ISA PATA support (Experimental)"
>> - depends on (ISA || PCI)
>> + depends on (ISA || PCI) && HAS_IOPORT
>> select PATA_TIMINGS
>> help
>> This option enables support for ISA/VLB/PCI bus legacy PATA
>> diff --git a/drivers/ata/ata_generic.c b/drivers/ata/ata_generic.c
>> index 2f57ec00ab82..2d391d117f74 100644
>> --- a/drivers/ata/ata_generic.c
>> +++ b/drivers/ata/ata_generic.c
>> @@ -197,8 +197,10 @@ static int ata_generic_init_one(struct pci_dev *dev, const struct pci_device_id
>> if (!(command & PCI_COMMAND_IO))
>> return -ENODEV;
>>
>> +#ifdef CONFIG_PATA_ALI
>> if (dev->vendor == PCI_VENDOR_ID_AL)
>> ata_pci_bmdma_clear_simplex(dev);
>> +#endif /* CONFIG_PATA_ALI */
>
> You can drop this change if...
>
>>
>> if (dev->vendor == PCI_VENDOR_ID_ATI) {
>> int rc = pcim_enable_device(dev);
>> diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c
>> index 9d28badfe41d..80137edb7ebf 100644
>> --- a/drivers/ata/libata-sff.c
>> +++ b/drivers/ata/libata-sff.c
>> @@ -3031,6 +3031,7 @@ EXPORT_SYMBOL_GPL(ata_bmdma_port_start32);
>>
>> #ifdef CONFIG_PCI
>>
>> +#ifdef CONFIG_HAS_IOPORT
>> /**
>> * ata_pci_bmdma_clear_simplex - attempt to kick device out of simplex
>> * @pdev: PCI device
>> @@ -3056,6 +3057,7 @@ int ata_pci_bmdma_clear_simplex(struct pci_dev *pdev)
>> return 0;
>> }
>> EXPORT_SYMBOL_GPL(ata_pci_bmdma_clear_simplex);
>> +#endif /* CONFIG_HAS_IOPORT */
>
> ...you move the #ifdef CONFIG_HAS_IOPORT inside the function as the first line
> and have the #endif right before the last "return 0;" (so the function only does
> return 0 for the !CONFIG_HAS_IOPORT case).
>
>>
>> static void ata_bmdma_nodma(struct ata_host *host, const char *reason)
>> {
>> diff --git a/include/linux/libata.h b/include/linux/libata.h
>> index 311cd93377c7..90002d4a785b 100644
>> --- a/include/linux/libata.h
>> +++ b/include/linux/libata.h
>> @@ -2012,7 +2012,9 @@ extern int ata_bmdma_port_start(struct ata_port *ap);
>> extern int ata_bmdma_port_start32(struct ata_port *ap);
>>
>> #ifdef CONFIG_PCI
>> +#ifdef CONFIG_HAS_IOPORT
>> extern int ata_pci_bmdma_clear_simplex(struct pci_dev *pdev);
>> +#endif /* CONFIG_HAS_IOPORT */
>
> And then you do not need these #ifdef/endif here. Overall, a lot less of #ifdef
> which I personally really dislike to see in .c files :)
Actually, thinking more about this, the function should probably be:
int ata_pci_bmdma_clear_simplex(struct pci_dev *pdev)
{
#ifdef CONFIG_HAS_IOPORT
unsigned long bmdma = pci_resource_start(pdev, 4);
u8 simplex;
if (bmdma == 0)
return -ENOENT;
simplex = inb(bmdma + 0x02);
outb(simplex & 0x60, bmdma + 0x02);
simplex = inb(bmdma + 0x02);
if (simplex & 0x80)
return -EOPNOTSUPP;
return 0;
#else
return -ENOENT;
#endif
}
And then no other "#ifdef CONFIG_HAS_IOPORT" needed.
>
>> extern void ata_pci_bmdma_init(struct ata_host *host);
>> extern int ata_pci_bmdma_prepare_host(struct pci_dev *pdev,
>> const struct ata_port_info * const * ppi,
>
--
Damien Le Moal
Western Digital Research
On Tue, 16 May 2023, Niklas Schnelle wrote:
> diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig
> index 753872408615..9ae082b14c44 100644
> --- a/drivers/rtc/Kconfig
> +++ b/drivers/rtc/Kconfig
> @@ -956,6 +956,7 @@ comment "Platform RTC drivers"
> config RTC_DRV_CMOS
> tristate "PC-style 'CMOS'"
> depends on X86 || ARM || PPC || MIPS || SPARC64
> + depends on HAS_IOPORT
NAK, this hasn't addressed my input for v2. Arnd also followed up with
similar observations with v3.
Maciej
On Tue, 16 May 2023, Niklas Schnelle wrote:
> diff --git a/drivers/net/fddi/defxx.c b/drivers/net/fddi/defxx.c
> index 1fef8a9b1a0f..0fbbb7286008 100644
> --- a/drivers/net/fddi/defxx.c
> +++ b/drivers/net/fddi/defxx.c
> @@ -254,7 +254,7 @@ static const char version[] =
> #define DFX_BUS_TC(dev) 0
> #endif
>
> -#if defined(CONFIG_EISA) || defined(CONFIG_PCI)
> +#ifdef CONFIG_HAS_IOPORT
> #define dfx_use_mmio bp->mmio
> #else
> #define dfx_use_mmio true
For this part:
Acked-by: Maciej W. Rozycki <[email protected]>
Maciej
On Tue, May 16, 2023 at 01:00:31PM +0200, Niklas Schnelle wrote:
> In a future patch HAS_IOPORT=n will result in inb()/outb() and friends
> not being declared. We thus need to guard sections of code calling them
> as alternative access methods with CONFIG_HAS_IOPORT checks. For
> uhci-hcd there are a lot of I/O port uses that do have MMIO alternatives
> all selected by uhci_has_pci_registers() so this can be handled by
> UHCI_IN/OUT macros and making uhci_has_pci_registers() constant 0 if
> CONFIG_HAS_IOPORT is unset.
>
> Co-developed-by: Arnd Bergmann <[email protected]>
> Signed-off-by: Arnd Bergmann <[email protected]>
> Signed-off-by: Niklas Schnelle <[email protected]>
> ---
> Note: The HAS_IOPORT Kconfig option was added in v6.4-rc1 so
> per-subsystem patches may be applied independently
>
> drivers/usb/host/uhci-hcd.c | 2 +-
> drivers/usb/host/uhci-hcd.h | 36 +++++++++++++++++++++++-------------
> 2 files changed, 24 insertions(+), 14 deletions(-)
>
> diff --git a/drivers/usb/host/uhci-hcd.c b/drivers/usb/host/uhci-hcd.c
> index 7cdc2fa7c28f..fd2408b553cf 100644
> --- a/drivers/usb/host/uhci-hcd.c
> +++ b/drivers/usb/host/uhci-hcd.c
> @@ -841,7 +841,7 @@ static int uhci_count_ports(struct usb_hcd *hcd)
>
> static const char hcd_name[] = "uhci_hcd";
>
> -#ifdef CONFIG_USB_PCI
> +#if defined(CONFIG_USB_PCI) && defined(CONFIG_HAS_IOPORT)
> #include "uhci-pci.c"
> #define PCI_DRIVER uhci_pci_driver
> #endif
> diff --git a/drivers/usb/host/uhci-hcd.h b/drivers/usb/host/uhci-hcd.h
> index 0688c3e5bfe2..c77705d03ed0 100644
> --- a/drivers/usb/host/uhci-hcd.h
> +++ b/drivers/usb/host/uhci-hcd.h
> @@ -505,41 +505,49 @@ static inline bool uhci_is_aspeed(const struct uhci_hcd *uhci)
> * we use memory mapped registers.
> */
>
> +#ifdef CONFIG_HAS_IOPORT
> +#define UHCI_IN(x) x
> +#define UHCI_OUT(x) x
> +#else
> +#define UHCI_IN(x) 0
> +#define UHCI_OUT(x)
> +#endif
> +
> #ifndef CONFIG_USB_UHCI_SUPPORT_NON_PCI_HC
> /* Support PCI only */
> static inline u32 uhci_readl(const struct uhci_hcd *uhci, int reg)
> {
> - return inl(uhci->io_addr + reg);
> + return UHCI_IN(inl(uhci->io_addr + reg));
> }
>
> static inline void uhci_writel(const struct uhci_hcd *uhci, u32 val, int reg)
> {
> - outl(val, uhci->io_addr + reg);
> + UHCI_OUT(outl(val, uhci->io_addr + reg));
I'm confused now.
So if CONFIG_HAS_IOPORT is enabled, wonderful, all is good.
But if it isn't, then these are just no-ops that do nothing? So then
the driver will fail to work? Why have these stubs at all?
Why not just not build the driver at all if this option is not enabled?
thanks,
greg k-h
On Tue, May 16, 2023, at 18:29, Greg Kroah-Hartman wrote:
> On Tue, May 16, 2023 at 01:00:31PM +0200, Niklas Schnelle wrote:
>> #ifndef CONFIG_USB_UHCI_SUPPORT_NON_PCI_HC
>> /* Support PCI only */
>> static inline u32 uhci_readl(const struct uhci_hcd *uhci, int reg)
>> {
>> - return inl(uhci->io_addr + reg);
>> + return UHCI_IN(inl(uhci->io_addr + reg));
>> }
>>
>> static inline void uhci_writel(const struct uhci_hcd *uhci, u32 val, int reg)
>> {
>> - outl(val, uhci->io_addr + reg);
>> + UHCI_OUT(outl(val, uhci->io_addr + reg));
>
> I'm confused now.
>
> So if CONFIG_HAS_IOPORT is enabled, wonderful, all is good.
>
> But if it isn't, then these are just no-ops that do nothing? So then
> the driver will fail to work? Why have these stubs at all?
>
> Why not just not build the driver at all if this option is not enabled?
If I remember correctly, the problem here is the lack of
abstractions in the uhci driver, it instead supports all
combinations of on-chip non-PCI devices using readb()/writeb()
and PCI devices using inb()/outb() in a shared codebase.
A particularly tricky combination is a kernel that supports on-chip
UHCI as well as CONFIG_USB_PCI (for EHCI/XHCI) but does not support
I/O ports because of platform limitations. The trick is to come up
with a set of changes that doesn't have to rewrite the entire logic
but also doesn't add an obscene number of #ifdef checks.
That said, there is a minor problem with the empty definition
+#define UHCI_OUT(x)
I think this should be "do { } while (0)" to avoid warnings
about empty if/else blocks.
Arnd
Hi
Am 16.05.23 um 13:00 schrieb Niklas Schnelle:
> In a future patch HAS_IOPORT=n will result in inb()/outb() and friends
> not being declared. We thus need to add HAS_IOPORT as dependency for
> those drivers using them and guard inline code in headers.
>
> Co-developed-by: Arnd Bergmann <[email protected]>
> Signed-off-by: Arnd Bergmann <[email protected]>
> Signed-off-by: Niklas Schnelle <[email protected]>
> ---
> Note: The HAS_IOPORT Kconfig option was added in v6.4-rc1 so
> per-subsystem patches may be applied independently
>
> drivers/video/console/Kconfig | 1 +
> drivers/video/fbdev/Kconfig | 21 +++++++++++----------
> include/video/vga.h | 8 ++++++++
Those are 3 different things. It might be preferable to not handle them
under the video/ umbrella.
> 3 files changed, 20 insertions(+), 10 deletions(-)
>
> diff --git a/drivers/video/console/Kconfig b/drivers/video/console/Kconfig
> index 22cea5082ac4..64974eaa3ac5 100644
> --- a/drivers/video/console/Kconfig
> +++ b/drivers/video/console/Kconfig
> @@ -10,6 +10,7 @@ config VGA_CONSOLE
> depends on !4xx && !PPC_8xx && !SPARC && !M68K && !PARISC && !SUPERH && \
> (!ARM || ARCH_FOOTBRIDGE || ARCH_INTEGRATOR || ARCH_NETWINDER) && \
> !ARM64 && !ARC && !MICROBLAZE && !OPENRISC && !S390 && !UML
> + depends on HAS_IOPORT
> select APERTURE_HELPERS if (DRM || FB || VFIO_PCI_CORE)
> default y
> help
> diff --git a/drivers/video/fbdev/Kconfig b/drivers/video/fbdev/Kconfig
> index 96e91570cdd3..a56c57dd839b 100644
> --- a/drivers/video/fbdev/Kconfig
> +++ b/drivers/video/fbdev/Kconfig
> @@ -335,7 +335,7 @@ config FB_IMX
>
> config FB_CYBER2000
> tristate "CyberPro 2000/2010/5000 support"
> - depends on FB && PCI && (BROKEN || !SPARC64)
> + depends on FB && PCI && HAS_IOPORT && (BROKEN || !SPARC64)
> select FB_CFB_FILLRECT
> select FB_CFB_COPYAREA
> select FB_CFB_IMAGEBLIT
> @@ -429,6 +429,7 @@ config FB_FM2
> config FB_ARC
> tristate "Arc Monochrome LCD board support"
> depends on FB && (X86 || COMPILE_TEST)
> + depends on HAS_IOPORT
> select FB_SYS_FILLRECT
> select FB_SYS_COPYAREA
> select FB_SYS_IMAGEBLIT
> @@ -1332,7 +1333,7 @@ config FB_ATY_BACKLIGHT
>
> config FB_S3
> tristate "S3 Trio/Virge support"
> - depends on FB && PCI
> + depends on FB && PCI && HAS_IOPORT
> select FB_CFB_FILLRECT
> select FB_CFB_COPYAREA
> select FB_CFB_IMAGEBLIT
> @@ -1393,7 +1394,7 @@ config FB_SAVAGE_ACCEL
>
> config FB_SIS
> tristate "SiS/XGI display support"
> - depends on FB && PCI
> + depends on FB && PCI && HAS_IOPORT
> select FB_CFB_FILLRECT
> select FB_CFB_COPYAREA
> select FB_CFB_IMAGEBLIT
> @@ -1424,7 +1425,7 @@ config FB_SIS_315
>
> config FB_VIA
> tristate "VIA UniChrome (Pro) and Chrome9 display support"
> - depends on FB && PCI && GPIOLIB && I2C && (X86 || COMPILE_TEST)
> + depends on FB && PCI && GPIOLIB && I2C && HAS_IOPORT && (X86 || COMPILE_TEST)
> select FB_CFB_FILLRECT
> select FB_CFB_COPYAREA
> select FB_CFB_IMAGEBLIT
> @@ -1463,7 +1464,7 @@ endif
>
> config FB_NEOMAGIC
> tristate "NeoMagic display support"
> - depends on FB && PCI
> + depends on FB && PCI && HAS_IOPORT
> select FB_MODE_HELPERS
> select FB_CFB_FILLRECT
> select FB_CFB_COPYAREA
> @@ -1493,7 +1494,7 @@ config FB_KYRO
>
> config FB_3DFX
> tristate "3Dfx Banshee/Voodoo3/Voodoo5 display support"
> - depends on FB && PCI
> + depends on FB && PCI && HAS_IOPORT
> select FB_CFB_IMAGEBLIT
> select FB_CFB_FILLRECT
> select FB_CFB_COPYAREA
> @@ -1543,7 +1544,7 @@ config FB_VOODOO1
>
> config FB_VT8623
> tristate "VIA VT8623 support"
> - depends on FB && PCI
> + depends on FB && PCI && HAS_IOPORT
> select FB_CFB_FILLRECT
> select FB_CFB_COPYAREA
> select FB_CFB_IMAGEBLIT
> @@ -1558,7 +1559,7 @@ config FB_VT8623
>
> config FB_TRIDENT
> tristate "Trident/CyberXXX/CyberBlade support"
> - depends on FB && PCI
> + depends on FB && PCI && HAS_IOPORT
> select FB_CFB_FILLRECT
> select FB_CFB_COPYAREA
> select FB_CFB_IMAGEBLIT
> @@ -1581,7 +1582,7 @@ config FB_TRIDENT
>
> config FB_ARK
> tristate "ARK 2000PV support"
> - depends on FB && PCI
> + depends on FB && PCI && HAS_IOPORT
> select FB_CFB_FILLRECT
> select FB_CFB_COPYAREA
> select FB_CFB_IMAGEBLIT
> @@ -2195,7 +2196,7 @@ config FB_SSD1307
>
> config FB_SM712
> tristate "Silicon Motion SM712 framebuffer support"
> - depends on FB && PCI
> + depends on FB && PCI && HAS_IOPORT
> select FB_CFB_FILLRECT
> select FB_CFB_COPYAREA
> select FB_CFB_IMAGEBLIT
> diff --git a/include/video/vga.h b/include/video/vga.h
> index 947c0abd04ef..f4b806b85c86 100644
> --- a/include/video/vga.h
> +++ b/include/video/vga.h
> @@ -203,18 +203,26 @@ extern int restore_vga(struct vgastate *state);
>
> static inline unsigned char vga_io_r (unsigned short port)
> {
> +#ifdef CONFIG_HAS_IOPORT
> return inb_p(port);
> +#else
> + return 0xff;
> +#endif
> }
>
> static inline void vga_io_w (unsigned short port, unsigned char val)
> {
> +#ifdef CONFIG_HAS_IOPORT
> outb_p(val, port);
> +#endif
> }
>
> static inline void vga_io_w_fast (unsigned short port, unsigned char reg,
> unsigned char val)
> {
> +#ifdef CONFIG_HAS_IOPORT
> outw(VGA_OUT16VAL (val, reg), port);
> +#endif
> }
It feels wrong that these helpers silently do nothing. I'd enclose them
in CONFIG_HAS_IOPORT entirely. The drivers that use them unconditionally
would then fail to build.
Best regards
Thomas
>
> static inline unsigned char vga_mm_r (void __iomem *regbase, unsigned short port)
--
Thomas Zimmermann
Graphics Driver Developer
SUSE Software Solutions Germany GmbH
Frankenstrasse 146, 90461 Nuernberg, Germany
GF: Ivo Totev, Andrew Myers, Andrew McDonald, Boudien Moerman
HRB 36809 (AG Nuernberg)
Hi
Am 16.05.23 um 13:00 schrieb Niklas Schnelle:
> In a future patch HAS_IOPORT=n will result in inb()/outb() and friends
> not being declared. We thus need to add HAS_IOPORT as dependency for
> those drivers using them. In the bochs driver there is optional MMIO
> support detected at runtime, warn if this isn't taken when
> HAS_IOPORT is not defined.
>
> There is also a direct and hard coded use in cirrus.c which according to
> the comment is only necessary during resume. Let's just skip this as
> for example s390 which doesn't have I/O port support also doesen't
> support suspend/resume.
>
> Co-developed-by: Arnd Bergmann <[email protected]>
> Signed-off-by: Arnd Bergmann <[email protected]>
> Signed-off-by: Niklas Schnelle <[email protected]>
> ---
> Note: The HAS_IOPORT Kconfig option was added in v6.4-rc1 so
> per-subsystem patches may be applied independently
>
> drivers/gpu/drm/qxl/Kconfig | 1 +
> drivers/gpu/drm/tiny/bochs.c | 17 +++++++++++++++++
> drivers/gpu/drm/tiny/cirrus.c | 2 ++
There are more invocations in gma500. See[1]
[1]
https://elixir.bootlin.com/linux/v6.3/source/drivers/gpu/drm/gma500/cdv_device.c#L30
> 3 files changed, 20 insertions(+)
>
> diff --git a/drivers/gpu/drm/qxl/Kconfig b/drivers/gpu/drm/qxl/Kconfig
> index ca3f51c2a8fe..d0e0d440c8d9 100644
> --- a/drivers/gpu/drm/qxl/Kconfig
> +++ b/drivers/gpu/drm/qxl/Kconfig
> @@ -2,6 +2,7 @@
> config DRM_QXL
> tristate "QXL virtual GPU"
> depends on DRM && PCI && MMU
> + depends on HAS_IOPORT
> select DRM_KMS_HELPER
> select DRM_TTM
> select DRM_TTM_HELPER
> diff --git a/drivers/gpu/drm/tiny/bochs.c b/drivers/gpu/drm/tiny/bochs.c
> index d254679a136e..3710339407cc 100644
> --- a/drivers/gpu/drm/tiny/bochs.c
> +++ b/drivers/gpu/drm/tiny/bochs.c
> @@ -2,6 +2,7 @@
>
> #include <linux/module.h>
> #include <linux/pci.h>
> +#include <asm/bug.h>
<linux/bug.h> please.
Best regards
Thomas
>
> #include <drm/drm_aperture.h>
> #include <drm/drm_atomic_helper.h>
> @@ -105,7 +106,9 @@ static void bochs_vga_writeb(struct bochs_device *bochs, u16 ioport, u8 val)
>
> writeb(val, bochs->mmio + offset);
> } else {
> +#ifdef CONFIG_HAS_IOPORT
> outb(val, ioport);
> +#endif
> }
> }
>
> @@ -119,7 +122,11 @@ static u8 bochs_vga_readb(struct bochs_device *bochs, u16 ioport)
>
> return readb(bochs->mmio + offset);
> } else {
> +#ifdef CONFIG_HAS_IOPORT
> return inb(ioport);
> +#else
> + return 0xff;
> +#endif
> }
> }
>
> @@ -132,8 +139,12 @@ static u16 bochs_dispi_read(struct bochs_device *bochs, u16 reg)
>
> ret = readw(bochs->mmio + offset);
> } else {
> +#ifdef CONFIG_HAS_IOPORT
> outw(reg, VBE_DISPI_IOPORT_INDEX);
> ret = inw(VBE_DISPI_IOPORT_DATA);
> +#else
> + ret = 0xffff;
> +#endif
> }
> return ret;
> }
> @@ -145,8 +156,10 @@ static void bochs_dispi_write(struct bochs_device *bochs, u16 reg, u16 val)
>
> writew(val, bochs->mmio + offset);
> } else {
> +#ifdef CONFIG_HAS_IOPORT
> outw(reg, VBE_DISPI_IOPORT_INDEX);
> outw(val, VBE_DISPI_IOPORT_DATA);
> +#endif
> }
> }
>
> @@ -229,6 +242,10 @@ static int bochs_hw_init(struct drm_device *dev)
> return -ENOMEM;
> }
> } else {
> + if (!IS_ENABLED(CONFIG_HAS_IOPORT)) {
> + DRM_ERROR("I/O ports are not supported\n");
> + return -EIO;
> + }
> ioaddr = VBE_DISPI_IOPORT_INDEX;
> iosize = 2;
> if (!request_region(ioaddr, iosize, "bochs-drm")) {
> diff --git a/drivers/gpu/drm/tiny/cirrus.c b/drivers/gpu/drm/tiny/cirrus.c
> index 594bc472862f..c65fea049bc7 100644
> --- a/drivers/gpu/drm/tiny/cirrus.c
> +++ b/drivers/gpu/drm/tiny/cirrus.c
> @@ -508,8 +508,10 @@ static void cirrus_crtc_helper_atomic_enable(struct drm_crtc *crtc,
>
> cirrus_mode_set(cirrus, &crtc_state->mode);
>
> +#ifdef CONFIG_HAS_IOPORT
> /* Unblank (needed on S3 resume, vgabios doesn't do it then) */
> outb(VGA_AR_ENABLE_DISPLAY, VGA_ATT_W);
> +#endif
>
> drm_dev_exit(idx);
> }
--
Thomas Zimmermann
Graphics Driver Developer
SUSE Software Solutions Germany GmbH
Frankenstrasse 146, 90461 Nuernberg, Germany
GF: Ivo Totev, Andrew Myers, Andrew McDonald, Boudien Moerman
HRB 36809 (AG Nuernberg)
On Tue, May 16, 2023, at 19:13, Thomas Zimmermann wrote:
>
> Am 16.05.23 um 13:00 schrieb Niklas Schnelle:
>> In a future patch HAS_IOPORT=n will result in inb()/outb() and friends
>> not being declared. We thus need to add HAS_IOPORT as dependency for
>> those drivers using them. In the bochs driver there is optional MMIO
>> support detected at runtime, warn if this isn't taken when
>> HAS_IOPORT is not defined.
>>
>> There is also a direct and hard coded use in cirrus.c which according to
>> the comment is only necessary during resume. Let's just skip this as
>> for example s390 which doesn't have I/O port support also doesen't
>> support suspend/resume.
>>
>> Co-developed-by: Arnd Bergmann <[email protected]>
>> Signed-off-by: Arnd Bergmann <[email protected]>
>> Signed-off-by: Niklas Schnelle <[email protected]>
>> ---
>> Note: The HAS_IOPORT Kconfig option was added in v6.4-rc1 so
>> per-subsystem patches may be applied independently
>>
>> drivers/gpu/drm/qxl/Kconfig | 1 +
>> drivers/gpu/drm/tiny/bochs.c | 17 +++++++++++++++++
>> drivers/gpu/drm/tiny/cirrus.c | 2 ++
>
> There are more invocations in gma500. See[1]
>
> [1]
> https://elixir.bootlin.com/linux/v6.3/source/drivers/gpu/drm/gma500/cdv_device.c#L30
GMA500 already has "depends on X86", so I don't think
any changes are needed there -- x86 is already highly dependent
on I/O ports for a number of reasons.
Arnd
On Tue, May 16, 2023 at 06:44:34PM +0200, Arnd Bergmann wrote:
> On Tue, May 16, 2023, at 18:29, Greg Kroah-Hartman wrote:
> > On Tue, May 16, 2023 at 01:00:31PM +0200, Niklas Schnelle wrote:
>
> >> #ifndef CONFIG_USB_UHCI_SUPPORT_NON_PCI_HC
> >> /* Support PCI only */
> >> static inline u32 uhci_readl(const struct uhci_hcd *uhci, int reg)
> >> {
> >> - return inl(uhci->io_addr + reg);
> >> + return UHCI_IN(inl(uhci->io_addr + reg));
> >> }
> >>
> >> static inline void uhci_writel(const struct uhci_hcd *uhci, u32 val, int reg)
> >> {
> >> - outl(val, uhci->io_addr + reg);
> >> + UHCI_OUT(outl(val, uhci->io_addr + reg));
> >
> > I'm confused now.
> >
> > So if CONFIG_HAS_IOPORT is enabled, wonderful, all is good.
> >
> > But if it isn't, then these are just no-ops that do nothing? So then
> > the driver will fail to work? Why have these stubs at all?
> >
> > Why not just not build the driver at all if this option is not enabled?
>
> If I remember correctly, the problem here is the lack of
> abstractions in the uhci driver, it instead supports all
> combinations of on-chip non-PCI devices using readb()/writeb()
> and PCI devices using inb()/outb() in a shared codebase.
Isn't that an abstraction? A single set of operations (uhci_readl(),
uhci_writel(), etc.) that always does the right sort of I/O even when
talking to different buses?
So I'm not sure what you mean by "the lack of abstractions".
> A particularly tricky combination is a kernel that supports on-chip
> UHCI as well as CONFIG_USB_PCI (for EHCI/XHCI) but does not support
> I/O ports because of platform limitations. The trick is to come up
> with a set of changes that doesn't have to rewrite the entire logic
> but also doesn't add an obscene number of #ifdef checks.
Indeed, in a kernel supporting that tricky combination the no-op code
would be generated. But it would never execute at runtime because the
uhci_has_pci_registers(uhci) test would always return 0, and so the
driver wouldn't fail.
> That said, there is a minor problem with the empty definition
>
> +#define UHCI_OUT(x)
>
> I think this should be "do { } while (0)" to avoid warnings
> about empty if/else blocks.
I'm sure Niklas wouldn't mind making such a change. But do we really
get such warnings? Does the compiler really think that this kind of
(macro-expanded) code:
if (uhci_has_pci_registers(uhci))
;
else if (uhci_is_aspeed(uhci))
writel(val, uhci->regs + uhci_aspeed_reg(reg));
deserves a warning? I write stuff like that fairly often; it's a good
way to showcase a high-probability do-nothing pathway at the start of a
series of conditional cases. And I haven't noticed any complaints from
the compiler.
Alan Stern
Hi,
On Tue, May 16, 2023 at 01:00:23PM +0200, Niklas Schnelle wrote:
> In a future patch HAS_IOPORT=n will result in inb()/outb() and friends
> not being declared. We thus need to add HAS_IOPORT as dependency for
> those drivers using them.
>
> Acked-by: Sebastian Reichel <[email protected]>
> Co-developed-by: Arnd Bergmann <[email protected]>
> Signed-off-by: Arnd Bergmann <[email protected]>
> Signed-off-by: Niklas Schnelle <[email protected]>
> ---
> Note: The HAS_IOPORT Kconfig option was added in v6.4-rc1 so
> per-subsystem patches may be applied independently
Thanks, queued to power-supply's for-next branch.
-- Sebastian
> drivers/power/reset/Kconfig | 1 +
> 1 file changed, 1 insertion(+)
>
> diff --git a/drivers/power/reset/Kconfig b/drivers/power/reset/Kconfig
> index 8c87eeda0fec..fff07b2bd77b 100644
> --- a/drivers/power/reset/Kconfig
> +++ b/drivers/power/reset/Kconfig
> @@ -158,6 +158,7 @@ config POWER_RESET_OXNAS
> config POWER_RESET_PIIX4_POWEROFF
> tristate "Intel PIIX4 power-off driver"
> depends on PCI
> + depends on HAS_IOPORT
> depends on MIPS || COMPILE_TEST
> help
> This driver supports powering off a system using the Intel PIIX4
> --
> 2.39.2
>
On Tue, May 16, 2023 at 06:29:56PM +0200, Greg Kroah-Hartman wrote:
> On Tue, May 16, 2023 at 01:00:31PM +0200, Niklas Schnelle wrote:
> > In a future patch HAS_IOPORT=n will result in inb()/outb() and friends
> > not being declared. We thus need to guard sections of code calling them
> > as alternative access methods with CONFIG_HAS_IOPORT checks. For
> > uhci-hcd there are a lot of I/O port uses that do have MMIO alternatives
> > all selected by uhci_has_pci_registers() so this can be handled by
> > UHCI_IN/OUT macros and making uhci_has_pci_registers() constant 0 if
> > CONFIG_HAS_IOPORT is unset.
> >
> > Co-developed-by: Arnd Bergmann <[email protected]>
> > Signed-off-by: Arnd Bergmann <[email protected]>
> > Signed-off-by: Niklas Schnelle <[email protected]>
> > ---
> > Note: The HAS_IOPORT Kconfig option was added in v6.4-rc1 so
> > per-subsystem patches may be applied independently
> >
> > drivers/usb/host/uhci-hcd.c | 2 +-
> > drivers/usb/host/uhci-hcd.h | 36 +++++++++++++++++++++++-------------
> > 2 files changed, 24 insertions(+), 14 deletions(-)
> >
> > diff --git a/drivers/usb/host/uhci-hcd.c b/drivers/usb/host/uhci-hcd.c
> > index 7cdc2fa7c28f..fd2408b553cf 100644
> > --- a/drivers/usb/host/uhci-hcd.c
> > +++ b/drivers/usb/host/uhci-hcd.c
> > @@ -841,7 +841,7 @@ static int uhci_count_ports(struct usb_hcd *hcd)
> >
> > static const char hcd_name[] = "uhci_hcd";
> >
> > -#ifdef CONFIG_USB_PCI
> > +#if defined(CONFIG_USB_PCI) && defined(CONFIG_HAS_IOPORT)
> > #include "uhci-pci.c"
> > #define PCI_DRIVER uhci_pci_driver
> > #endif
> > diff --git a/drivers/usb/host/uhci-hcd.h b/drivers/usb/host/uhci-hcd.h
> > index 0688c3e5bfe2..c77705d03ed0 100644
> > --- a/drivers/usb/host/uhci-hcd.h
> > +++ b/drivers/usb/host/uhci-hcd.h
> > @@ -505,41 +505,49 @@ static inline bool uhci_is_aspeed(const struct uhci_hcd *uhci)
> > * we use memory mapped registers.
> > */
> >
> > +#ifdef CONFIG_HAS_IOPORT
> > +#define UHCI_IN(x) x
> > +#define UHCI_OUT(x) x
> > +#else
> > +#define UHCI_IN(x) 0
> > +#define UHCI_OUT(x)
> > +#endif
> > +
> > #ifndef CONFIG_USB_UHCI_SUPPORT_NON_PCI_HC
> > /* Support PCI only */
> > static inline u32 uhci_readl(const struct uhci_hcd *uhci, int reg)
> > {
> > - return inl(uhci->io_addr + reg);
> > + return UHCI_IN(inl(uhci->io_addr + reg));
> > }
> >
> > static inline void uhci_writel(const struct uhci_hcd *uhci, u32 val, int reg)
> > {
> > - outl(val, uhci->io_addr + reg);
> > + UHCI_OUT(outl(val, uhci->io_addr + reg));
>
> I'm confused now.
>
> So if CONFIG_HAS_IOPORT is enabled, wonderful, all is good.
>
> But if it isn't, then these are just no-ops that do nothing? So then
> the driver will fail to work? Why have these stubs at all?
>
> Why not just not build the driver at all if this option is not enabled?
I should add something to my previous email. This particular section of
code is protected by:
#ifndef CONFIG_USB_UHCI_SUPPORT_NON_PCI_HC
/* Support PCI only */
So it gets used only in cases where the driver supports just a PCI bus
-- no other sorts of non-PCI on-chip devices. But the preceding patch
in this series changes the Kconfig file to say:
config USB_UHCI_HCD
tristate "UHCI HCD (most Intel and VIA) support"
depends on (USB_PCI && HAS_IOPORT) || USB_UHCI_SUPPORT_NON_PCI_HC
As a result, when the configuration includes support only for PCI
controllers the driver won't get built unless HAS_IOPORT is set. Thus
the no-op case (in this part of the code) can't arise.
Which is a long-winded way of saying that you're right; the UHCI_IN()
and UHCI_OUT() wrappers aren't needed in this part of the driver. I
guess Niklas put them in either for consistency with the rest of the
code or because it didn't occur to him that they could be omitted. (And
I didn't spot it either.)
Alan Stern
On Tue, 2023-05-16 at 16:49 +0100, Maciej W. Rozycki wrote:
> On Tue, 16 May 2023, Niklas Schnelle wrote:
>
> > diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig
> > index 753872408615..9ae082b14c44 100644
> > --- a/drivers/rtc/Kconfig
> > +++ b/drivers/rtc/Kconfig
> > @@ -956,6 +956,7 @@ comment "Platform RTC drivers"
> > config RTC_DRV_CMOS
> > tristate "PC-style 'CMOS'"
> > depends on X86 || ARM || PPC || MIPS || SPARC64
> > + depends on HAS_IOPORT
>
> NAK, this hasn't addressed my input for v2. Arnd also followed up with
> similar observations with v3.
>
> Maciej
Ah sorry about that, I had marked the mail as TODO but going over it
missed the proposed fix. Changed this to "depends on HAS_IOPORT ||
ARCH_DECSTATION" for v5.
On Tue, 2023-05-16 at 15:51 -0400, Alan Stern wrote:
> On Tue, May 16, 2023 at 06:44:34PM +0200, Arnd Bergmann wrote:
> > On Tue, May 16, 2023, at 18:29, Greg Kroah-Hartman wrote:
> > > On Tue, May 16, 2023 at 01:00:31PM +0200, Niklas Schnelle wrote:
> >
> > > > #ifndef CONFIG_USB_UHCI_SUPPORT_NON_PCI_HC
> > > > /* Support PCI only */
> > > > static inline u32 uhci_readl(const struct uhci_hcd *uhci, int reg)
> > > > {
> > > > - return inl(uhci->io_addr + reg);
> > > > + return UHCI_IN(inl(uhci->io_addr + reg));
> > > > }
> > > >
> > > > static inline void uhci_writel(const struct uhci_hcd *uhci, u32 val, int reg)
> > > > {
> > > > - outl(val, uhci->io_addr + reg);
> > > > + UHCI_OUT(outl(val, uhci->io_addr + reg));
> > >
> > > I'm confused now.
> > >
> > > So if CONFIG_HAS_IOPORT is enabled, wonderful, all is good.
> > >
> > > But if it isn't, then these are just no-ops that do nothing? So then
> > > the driver will fail to work? Why have these stubs at all?
> > >
> > > Why not just not build the driver at all if this option is not enabled?
The driver supports multiple access methods in several functions
similar to the following:
static inline void uhci_writel(const struct uhci_hcd *uhci, u32 val, int reg)
{
if (uhci_has_pci_registers(uhci))
UHCI_OUT(outl(val, uhci->io_addr + reg));
else if (uhci_is_aspeed(uhci))
writel(val, uhci->regs + uhci_aspeed_reg(reg));
#ifdef CONFIG_USB_UHCI_BIG_ENDIAN_MMIO
else if (uhci_big_endian_mmio(uhci))
writel_be(val, uhci->regs + reg);
#endif
else
writel(val, uhci->regs + reg);
}
Instead of adding more #ifdefs Alan Stern suggested to just stub out
both uhci_has_pci_registers() and the access itself. So with a half way
optimizing compiler this shouldn't even leave no-ops in the binary.
>
> > That said, there is a minor problem with the empty definition
> >
> > +#define UHCI_OUT(x)
> >
> > I think this should be "do { } while (0)" to avoid warnings
> > about empty if/else blocks.
>
> I'm sure Niklas wouldn't mind making such a change. But do we really
> get such warnings? Does the compiler really think that this kind of
> (macro-expanded) code:
>
> if (uhci_has_pci_registers(uhci))
> ;
> else if (uhci_is_aspeed(uhci))
> writel(val, uhci->regs + uhci_aspeed_reg(reg));
>
> deserves a warning? I write stuff like that fairly often; it's a good
> way to showcase a high-probability do-nothing pathway at the start of a
> series of conditional cases. And I haven't noticed any complaints from
> the compiler.
>
> Alan Stern
I changed it to "do {} while (0)" for v5 but agree I haven't seen
warnings for this either. Still doesn't hurt.
Thanks,
Niklas
On Wed, 17 May 2023, Niklas Schnelle wrote:
> > NAK, this hasn't addressed my input for v2. Arnd also followed up with
> > similar observations with v3.
>
> Ah sorry about that, I had marked the mail as TODO but going over it
> missed the proposed fix. Changed this to "depends on HAS_IOPORT ||
> ARCH_DECSTATION" for v5.
It has to be MACH_DECSTATION actually, cf. arch/mips/Kconfig. Thanks.
Maciej
On Tue, May 16, 2023, at 22:17, Alan Stern wrote:
> On Tue, May 16, 2023 at 06:29:56PM +0200, Greg Kroah-Hartman wrote:
>> On Tue, May 16, 2023 at 01:00:31PM +0200, Niklas Schnelle wrote:
>
>> I'm confused now.
>>
>> So if CONFIG_HAS_IOPORT is enabled, wonderful, all is good.
>>
>> But if it isn't, then these are just no-ops that do nothing? So then
>> the driver will fail to work? Why have these stubs at all?
>>
>> Why not just not build the driver at all if this option is not enabled?
>
> I should add something to my previous email. This particular section of
> code is protected by:
>
> #ifndef CONFIG_USB_UHCI_SUPPORT_NON_PCI_HC
> /* Support PCI only */
>
> So it gets used only in cases where the driver supports just a PCI bus
> -- no other sorts of non-PCI on-chip devices. But the preceding patch
> in this series changes the Kconfig file to say:
>
> config USB_UHCI_HCD
> tristate "UHCI HCD (most Intel and VIA) support"
> depends on (USB_PCI && HAS_IOPORT) || USB_UHCI_SUPPORT_NON_PCI_HC
>
> As a result, when the configuration includes support only for PCI
> controllers the driver won't get built unless HAS_IOPORT is set. Thus
> the no-op case (in this part of the code) can't arise.
Indeed, that makes sense.
> Which is a long-winded way of saying that you're right; the UHCI_IN()
> and UHCI_OUT() wrappers aren't needed in this part of the driver. I
> guess Niklas put them in either for consistency with the rest of the
> code or because it didn't occur to him that they could be omitted. (And
> I didn't spot it either.)
It's probably less confusing to leave out the PCI-only part of
the patch then and only modify the generic portion.
Arnd
On Tue, 2023-05-16 at 19:21 +0200, Thomas Zimmermann wrote:
> Hi
>
> Am 16.05.23 um 13:00 schrieb Niklas Schnelle:
> > In a future patch HAS_IOPORT=n will result in inb()/outb() and friends
> > not being declared. We thus need to add HAS_IOPORT as dependency for
> > those drivers using them and guard inline code in headers.
> >
> > Co-developed-by: Arnd Bergmann <[email protected]>
> > Signed-off-by: Arnd Bergmann <[email protected]>
> > Signed-off-by: Niklas Schnelle <[email protected]>
> > ---
> > Note: The HAS_IOPORT Kconfig option was added in v6.4-rc1 so
> > per-subsystem patches may be applied independently
> >
> > drivers/video/console/Kconfig | 1 +
> > drivers/video/fbdev/Kconfig | 21 +++++++++++----------
> > include/video/vga.h | 8 ++++++++
>
> Those are 3 different things. It might be preferable to not handle them
> under the video/ umbrella.
>
> > 3 files changed, 20 insertions(+), 10 deletions(-)
> >
> > diff --git a/drivers/video/console/Kconfig b/drivers/video/console/Kconfig
> > index 22cea5082ac4..64974eaa3ac5 100644
> > --- a/drivers/video/console/Kconfig
> > +++ b/drivers/video/console/Kconfig
> > @@ -10,6 +10,7 @@ config VGA_CONSOLE
> > depends on !4xx && !PPC_8xx && !SPARC && !M68K && !PARISC && !SUPERH && \
> > (!ARM || ARCH_FOOTBRIDGE || ARCH_INTEGRATOR || ARCH_NETWINDER) && \
> > !ARM64 && !ARC && !MICROBLAZE && !OPENRISC && !S390 && !UML
> > + depends on HAS_IOPORT
> > select APERTURE_HELPERS if (DRM || FB || VFIO_PCI_CORE)
> > default y
> > help
> > diff --git a/drivers/video/fbdev/Kconfig b/drivers/video/fbdev/Kconfig
> > index 96e91570cdd3..a56c57dd839b 100644
> > --- a/drivers/video/fbdev/Kconfig
> > +++ b/drivers/video/fbdev/Kconfig
> > @@ -335,7 +335,7 @@ config FB_IMX
> >
> > config FB_CYBER2000
> > tristate "CyberPro 2000/2010/5000 support"
> > - depends on FB && PCI && (BROKEN || !SPARC64)
> > + depends on FB && PCI && HAS_IOPORT && (BROKEN || !SPARC64)
> > select FB_CFB_FILLRECT
> > select FB_CFB_COPYAREA
> > select FB_CFB_IMAGEBLIT
> > @@ -429,6 +429,7 @@ config FB_FM2
> > config FB_ARC
> > tristate "Arc Monochrome LCD board support"
> > depends on FB && (X86 || COMPILE_TEST)
> > + depends on HAS_IOPORT
> > select FB_SYS_FILLRECT
> > select FB_SYS_COPYAREA
> > select FB_SYS_IMAGEBLIT
> > @@ -1332,7 +1333,7 @@ config FB_ATY_BACKLIGHT
> >
> > config FB_S3
> > tristate "S3 Trio/Virge support"
> > - depends on FB && PCI
> > + depends on FB && PCI && HAS_IOPORT
> > select FB_CFB_FILLRECT
> > select FB_CFB_COPYAREA
> > select FB_CFB_IMAGEBLIT
> > @@ -1393,7 +1394,7 @@ config FB_SAVAGE_ACCEL
> >
> > config FB_SIS
> > tristate "SiS/XGI display support"
> > - depends on FB && PCI
> > + depends on FB && PCI && HAS_IOPORT
> > select FB_CFB_FILLRECT
> > select FB_CFB_COPYAREA
> > select FB_CFB_IMAGEBLIT
> > @@ -1424,7 +1425,7 @@ config FB_SIS_315
> >
> > config FB_VIA
> > tristate "VIA UniChrome (Pro) and Chrome9 display support"
> > - depends on FB && PCI && GPIOLIB && I2C && (X86 || COMPILE_TEST)
> > + depends on FB && PCI && GPIOLIB && I2C && HAS_IOPORT && (X86 || COMPILE_TEST)
> > select FB_CFB_FILLRECT
> > select FB_CFB_COPYAREA
> > select FB_CFB_IMAGEBLIT
> > @@ -1463,7 +1464,7 @@ endif
> >
> > config FB_NEOMAGIC
> > tristate "NeoMagic display support"
> > - depends on FB && PCI
> > + depends on FB && PCI && HAS_IOPORT
> > select FB_MODE_HELPERS
> > select FB_CFB_FILLRECT
> > select FB_CFB_COPYAREA
> > @@ -1493,7 +1494,7 @@ config FB_KYRO
> >
> > config FB_3DFX
> > tristate "3Dfx Banshee/Voodoo3/Voodoo5 display support"
> > - depends on FB && PCI
> > + depends on FB && PCI && HAS_IOPORT
> > select FB_CFB_IMAGEBLIT
> > select FB_CFB_FILLRECT
> > select FB_CFB_COPYAREA
> > @@ -1543,7 +1544,7 @@ config FB_VOODOO1
> >
> > config FB_VT8623
> > tristate "VIA VT8623 support"
> > - depends on FB && PCI
> > + depends on FB && PCI && HAS_IOPORT
> > select FB_CFB_FILLRECT
> > select FB_CFB_COPYAREA
> > select FB_CFB_IMAGEBLIT
> > @@ -1558,7 +1559,7 @@ config FB_VT8623
> >
> > config FB_TRIDENT
> > tristate "Trident/CyberXXX/CyberBlade support"
> > - depends on FB && PCI
> > + depends on FB && PCI && HAS_IOPORT
> > select FB_CFB_FILLRECT
> > select FB_CFB_COPYAREA
> > select FB_CFB_IMAGEBLIT
> > @@ -1581,7 +1582,7 @@ config FB_TRIDENT
> >
> > config FB_ARK
> > tristate "ARK 2000PV support"
> > - depends on FB && PCI
> > + depends on FB && PCI && HAS_IOPORT
> > select FB_CFB_FILLRECT
> > select FB_CFB_COPYAREA
> > select FB_CFB_IMAGEBLIT
> > @@ -2195,7 +2196,7 @@ config FB_SSD1307
> >
> > config FB_SM712
> > tristate "Silicon Motion SM712 framebuffer support"
> > - depends on FB && PCI
> > + depends on FB && PCI && HAS_IOPORT
> > select FB_CFB_FILLRECT
> > select FB_CFB_COPYAREA
> > select FB_CFB_IMAGEBLIT
> > diff --git a/include/video/vga.h b/include/video/vga.h
> > index 947c0abd04ef..f4b806b85c86 100644
> > --- a/include/video/vga.h
> > +++ b/include/video/vga.h
> > @@ -203,18 +203,26 @@ extern int restore_vga(struct vgastate *state);
> >
> > static inline unsigned char vga_io_r (unsigned short port)
> > {
> > +#ifdef CONFIG_HAS_IOPORT
> > return inb_p(port);
> > +#else
> > + return 0xff;
> > +#endif
> > }
> >
> > static inline void vga_io_w (unsigned short port, unsigned char val)
> > {
> > +#ifdef CONFIG_HAS_IOPORT
> > outb_p(val, port);
> > +#endif
> > }
> >
> > static inline void vga_io_w_fast (unsigned short port, unsigned char reg,
> > unsigned char val)
> > {
> > +#ifdef CONFIG_HAS_IOPORT
> > outw(VGA_OUT16VAL (val, reg), port);
> > +#endif
> > }
>
> It feels wrong that these helpers silently do nothing. I'd enclose them
> in CONFIG_HAS_IOPORT entirely. The drivers that use them unconditionally
> would then fail to build.
>
> Best regards
> Thomas
Ok yeah, I was looking at the call sites like vga_w_fast() that use
either an HAS_IOPORT dependent function or a writew() based one and so
if I #ifdef the regbase != NULL check we could end up with a NULL
derference but I guess that is kind of what we want since clearly
something is wrong if the driver tries to do I/O port access despite it
not being available.
Thanks,
Niklas
On Tue, May 16, 2023 at 1:00 PM Niklas Schnelle <[email protected]> wrote:
>
> In a future patch HAS_IOPORT=n will result in inb()/outb() and friends
> not being declared. We thus need to add HAS_IOPORT as dependency for
> those drivers using them.
>
> Co-developed-by: Arnd Bergmann <[email protected]>
> Signed-off-by: Arnd Bergmann <[email protected]>
> Signed-off-by: Niklas Schnelle <[email protected]>
> ---
> Note: The HAS_IOPORT Kconfig option was added in v6.4-rc1 so
> per-subsystem patches may be applied independently
>
> drivers/gpio/Kconfig | 26 +++++++++++++-------------
> 1 file changed, 13 insertions(+), 13 deletions(-)
>
> diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
> index 5521f060d58e..a470ec8d617b 100644
> --- a/drivers/gpio/Kconfig
> +++ b/drivers/gpio/Kconfig
> @@ -704,18 +704,6 @@ config GPIO_VISCONTI
> help
> Say yes here to support GPIO on Tohisba Visconti.
>
> -config GPIO_VX855
> - tristate "VIA VX855/VX875 GPIO"
> - depends on (X86 || COMPILE_TEST) && PCI
> - select MFD_CORE
> - select MFD_VX855
> - help
> - Support access to the VX855/VX875 GPIO lines through the GPIO library.
> -
> - This driver provides common support for accessing the device.
> - Additional drivers must be enabled in order to use the
> - functionality of the device.
> -
> config GPIO_WCD934X
> tristate "Qualcomm Technologies Inc WCD9340/WCD9341 GPIO controller driver"
> depends on MFD_WCD934X && OF_GPIO
> @@ -835,7 +823,19 @@ config GPIO_IDT3243X
> endmenu
>
> menu "Port-mapped I/O GPIO drivers"
> - depends on X86 # Unconditional I/O space access
> + depends on X86 && HAS_IOPORT # I/O space access
> +
> +config GPIO_VX855
> + tristate "VIA VX855/VX875 GPIO"
> + depends on PCI
> + select MFD_CORE
> + select MFD_VX855
> + help
> + Support access to the VX855/VX875 GPIO lines through the GPIO library.
> +
> + This driver provides common support for accessing the device.
> + Additional drivers must be enabled in order to use the
> + functionality of the device.
>
> config GPIO_I8255
> tristate
> --
> 2.39.2
>
Applied, thanks!
Bart
On Tue, May 16, 2023 at 01:00:01PM +0200, Niklas Schnelle wrote:
> In a future patch HAS_IOPORT=n will result in inb()/outb() and friends
> not being declared. We thus need to add HAS_IOPORT as dependency for
> those drivers using them.
>
> Co-developed-by: Arnd Bergmann <[email protected]>
> Signed-off-by: Arnd Bergmann <[email protected]>
> Signed-off-by: Niklas Schnelle <[email protected]>
Hi Niklas,
The change itself is fine, but please update the description to reflect
that this is adding a depends on HAS_IOPORT_MAP rather than HAS_IOPORT,
along with the reason why it's needed (i.e. devm_ioport_map() is used).
Thanks,
William Breathitt Gray
> ---
> Note: The HAS_IOPORT Kconfig option was added in v6.4-rc1 so
> per-subsystem patches may be applied independently
>
> drivers/counter/Kconfig | 1 +
> 1 file changed, 1 insertion(+)
>
> diff --git a/drivers/counter/Kconfig b/drivers/counter/Kconfig
> index 4228be917038..e65a2bf178b8 100644
> --- a/drivers/counter/Kconfig
> +++ b/drivers/counter/Kconfig
> @@ -15,6 +15,7 @@ if COUNTER
> config 104_QUAD_8
> tristate "ACCES 104-QUAD-8 driver"
> depends on (PC104 && X86) || COMPILE_TEST
> + depends on HAS_IOPORT_MAP
> select ISA_BUS_API
> help
> Say yes here to build support for the ACCES 104-QUAD-8 quadrature
> --
> 2.39.2
>
On Wed, 2023-05-17 at 14:17 +0200, Arnd Bergmann wrote:
> On Tue, May 16, 2023, at 22:17, Alan Stern wrote:
> > On Tue, May 16, 2023 at 06:29:56PM +0200, Greg Kroah-Hartman wrote:
> > > On Tue, May 16, 2023 at 01:00:31PM +0200, Niklas Schnelle wrote:
> >
> > > I'm confused now.
> > >
> > > So if CONFIG_HAS_IOPORT is enabled, wonderful, all is good.
> > >
> > > But if it isn't, then these are just no-ops that do nothing? So then
> > > the driver will fail to work? Why have these stubs at all?
> > >
> > > Why not just not build the driver at all if this option is not enabled?
> >
> > I should add something to my previous email. This particular section of
> > code is protected by:
> >
> > #ifndef CONFIG_USB_UHCI_SUPPORT_NON_PCI_HC
> > /* Support PCI only */
> >
> > So it gets used only in cases where the driver supports just a PCI bus
> > -- no other sorts of non-PCI on-chip devices. But the preceding patch
> > in this series changes the Kconfig file to say:
> >
> > config USB_UHCI_HCD
> > tristate "UHCI HCD (most Intel and VIA) support"
> > depends on (USB_PCI && HAS_IOPORT) || USB_UHCI_SUPPORT_NON_PCI_HC
> >
> > As a result, when the configuration includes support only for PCI
> > controllers the driver won't get built unless HAS_IOPORT is set. Thus
> > the no-op case (in this part of the code) can't arise.
>
> Indeed, that makes sense.
>
> > Which is a long-winded way of saying that you're right; the UHCI_IN()
> > and UHCI_OUT() wrappers aren't needed in this part of the driver. I
> > guess Niklas put them in either for consistency with the rest of the
> > code or because it didn't occur to him that they could be omitted. (And
> > I didn't spot it either.)
>
> It's probably less confusing to leave out the PCI-only part of
> the patch then and only modify the generic portion.
>
> Arnd
Yes I agree that way the UHCI_IN/OUT() macro is also only used directly
in combination with uhci_has_pci_registers(). I've done this for v5.
Thanks,
Niklas
On Tue, 2023-05-16 at 22:23 +0900, Damien Le Moal wrote:
> On 5/16/23 22:18, Damien Le Moal wrote:
> > On 5/16/23 19:59, Niklas Schnelle wrote:
> > > In a future patch HAS_IOPORT=n will result in inb()/outb() and friends
> > > not being declared. We thus need to add HAS_IOPORT as dependency for
> > > those drivers using them.
> > >
> > > Co-developed-by: Arnd Bergmann <[email protected]>
> > > Signed-off-by: Arnd Bergmann <[email protected]>
> > > Acked-by: Damien Le Moal <[email protected]>
> > > Signed-off-by: Niklas Schnelle <[email protected]>
> > > ---
> > >
---8<---
> > > +++ b/drivers/ata/libata-sff.c
> > > @@ -3031,6 +3031,7 @@ EXPORT_SYMBOL_GPL(ata_bmdma_port_start32);
> > >
> > > #ifdef CONFIG_PCI
> > >
> > > +#ifdef CONFIG_HAS_IOPORT
> > > /**
> > > * ata_pci_bmdma_clear_simplex - attempt to kick device out of simplex
> > > * @pdev: PCI device
> > > @@ -3056,6 +3057,7 @@ int ata_pci_bmdma_clear_simplex(struct pci_dev *pdev)
> > > return 0;
> > > }
> > > EXPORT_SYMBOL_GPL(ata_pci_bmdma_clear_simplex);
> > > +#endif /* CONFIG_HAS_IOPORT */
> >
> > ...you move the #ifdef CONFIG_HAS_IOPORT inside the function as the first line
> > and have the #endif right before the last "return 0;" (so the function only does
> > return 0 for the !CONFIG_HAS_IOPORT case).
> >
> > >
> > > static void ata_bmdma_nodma(struct ata_host *host, const char *reason)
> > > {
> > > diff --git a/include/linux/libata.h b/include/linux/libata.h
> > > index 311cd93377c7..90002d4a785b 100644
> > > --- a/include/linux/libata.h
> > > +++ b/include/linux/libata.h
> > > @@ -2012,7 +2012,9 @@ extern int ata_bmdma_port_start(struct ata_port *ap);
> > > extern int ata_bmdma_port_start32(struct ata_port *ap);
> > >
> > > #ifdef CONFIG_PCI
> > > +#ifdef CONFIG_HAS_IOPORT
> > > extern int ata_pci_bmdma_clear_simplex(struct pci_dev *pdev);
> > > +#endif /* CONFIG_HAS_IOPORT */
> >
> > And then you do not need these #ifdef/endif here. Overall, a lot less of #ifdef
> > which I personally really dislike to see in .c files :)
>
> Actually, thinking more about this, the function should probably be:
>
> int ata_pci_bmdma_clear_simplex(struct pci_dev *pdev)
> {
> #ifdef CONFIG_HAS_IOPORT
> unsigned long bmdma = pci_resource_start(pdev, 4);
> u8 simplex;
>
> if (bmdma == 0)
> return -ENOENT;
>
> simplex = inb(bmdma + 0x02);
> outb(simplex & 0x60, bmdma + 0x02);
> simplex = inb(bmdma + 0x02);
> if (simplex & 0x80)
> return -EOPNOTSUPP;
> return 0;
> #else
> return -ENOENT;
> #endif
> }
>
> And then no other "#ifdef CONFIG_HAS_IOPORT" needed.
>
>
Ok I went with this for v5. It's a bit of a matter of taste. For the
video subsystem I just went the other direction #ifdeffingthe whole
helper and its callsites much as I had here. They were all in headers
and prefixed with "vga_io.." though. Either way I'm fine with either
and will go with the subsystem maintainer's preference.
Thanks,
Niklas
On Thu, 2023-05-18 at 21:26 -0400, William Breathitt Gray wrote:
> On Tue, May 16, 2023 at 01:00:01PM +0200, Niklas Schnelle wrote:
> > In a future patch HAS_IOPORT=n will result in inb()/outb() and friends
> > not being declared. We thus need to add HAS_IOPORT as dependency for
> > those drivers using them.
> >
> > Co-developed-by: Arnd Bergmann <[email protected]>
> > Signed-off-by: Arnd Bergmann <[email protected]>
> > Signed-off-by: Niklas Schnelle <[email protected]>
>
> Hi Niklas,
>
> The change itself is fine, but please update the description to reflect
> that this is adding a depends on HAS_IOPORT_MAP rather than HAS_IOPORT,
> along with the reason why it's needed (i.e. devm_ioport_map() is used).
>
> Thanks,
>
> William Breathitt Gray
>
>
Right, this clearly needs adjustment. I went with the following commit
message for v5:
"counter: add HAS_IOPORT_MAP dependency
The 104_QUAD_8 counter driver uses devm_ioport_map() without depending
on HAS_IOPORT_MAP. This causes compilation to fail on platforms such as
s390 which do not support I/O port mapping. Add the missing
HAS_IOPORT_MAP dependency to fix this."
Thanks,
Niklas
On Fri, 2023-05-19 at 15:17 +0200, Niklas Schnelle wrote:
> On Thu, 2023-05-18 at 21:26 -0400, William Breathitt Gray wrote:
> > On Tue, May 16, 2023 at 01:00:01PM +0200, Niklas Schnelle wrote:
> > > In a future patch HAS_IOPORT=n will result in inb()/outb() and friends
> > > not being declared. We thus need to add HAS_IOPORT as dependency for
> > > those drivers using them.
> > >
> > > Co-developed-by: Arnd Bergmann <[email protected]>
> > > Signed-off-by: Arnd Bergmann <[email protected]>
> > > Signed-off-by: Niklas Schnelle <[email protected]>
> >
> > Hi Niklas,
> >
> > The change itself is fine, but please update the description to reflect
> > that this is adding a depends on HAS_IOPORT_MAP rather than HAS_IOPORT,
> > along with the reason why it's needed (i.e. devm_ioport_map() is used).
> >
> > Thanks,
> >
> > William Breathitt Gray
> >
> >
>
> Right, this clearly needs adjustment. I went with the following commit
> message for v5:
>
> "counter: add HAS_IOPORT_MAP dependency
>
> The 104_QUAD_8 counter driver uses devm_ioport_map() without depending
> on HAS_IOPORT_MAP. This causes compilation to fail on platforms such as
> s390 which do not support I/O port mapping. Add the missing
> HAS_IOPORT_MAP dependency to fix this."
>
Just noticed this isn't entirely correct. As devm_ioport_map() has an
empty stub for HAS_IOPORT_MAP=n this doesn't lead to a compile error it
just doesn't work. Will reword to "This causes the driver to not be
useable on platforms ..."
On Fri, 2023-05-19 at 15:38 +0200, Niklas Schnelle wrote:
> On Fri, 2023-05-19 at 15:17 +0200, Niklas Schnelle wrote:
> > On Thu, 2023-05-18 at 21:26 -0400, William Breathitt Gray wrote:
> > > On Tue, May 16, 2023 at 01:00:01PM +0200, Niklas Schnelle wrote:
> > > > In a future patch HAS_IOPORT=n will result in inb()/outb() and friends
> > > > not being declared. We thus need to add HAS_IOPORT as dependency for
> > > > those drivers using them.
> > > >
> > > > Co-developed-by: Arnd Bergmann <[email protected]>
> > > > Signed-off-by: Arnd Bergmann <[email protected]>
> > > > Signed-off-by: Niklas Schnelle <[email protected]>
> > >
> > > Hi Niklas,
> > >
> > > The change itself is fine, but please update the description to reflect
> > > that this is adding a depends on HAS_IOPORT_MAP rather than HAS_IOPORT,
> > > along with the reason why it's needed (i.e. devm_ioport_map() is used).
> > >
> > > Thanks,
> > >
> > > William Breathitt Gray
> > >
> > >
> >
> > Right, this clearly needs adjustment. I went with the following commit
> > message for v5:
> >
> > "counter: add HAS_IOPORT_MAP dependency
> >
> > The 104_QUAD_8 counter driver uses devm_ioport_map() without depending
> > on HAS_IOPORT_MAP. This causes compilation to fail on platforms such as
> > s390 which do not support I/O port mapping. Add the missing
> > HAS_IOPORT_MAP dependency to fix this."
> >
>
> Just noticed this isn't entirely correct. As devm_ioport_map() has an
> empty stub for HAS_IOPORT_MAP=n this doesn't lead to a compile error it
> just doesn't work. Will reword to "This causes the driver to not be
> useable on platforms ..."
s/useable/usable/
On Fri, May 19, 2023 at 03:39:57PM +0200, Niklas Schnelle wrote:
> On Fri, 2023-05-19 at 15:38 +0200, Niklas Schnelle wrote:
> > On Fri, 2023-05-19 at 15:17 +0200, Niklas Schnelle wrote:
> > > On Thu, 2023-05-18 at 21:26 -0400, William Breathitt Gray wrote:
> > > > On Tue, May 16, 2023 at 01:00:01PM +0200, Niklas Schnelle wrote:
> > > > > In a future patch HAS_IOPORT=n will result in inb()/outb() and friends
> > > > > not being declared. We thus need to add HAS_IOPORT as dependency for
> > > > > those drivers using them.
> > > > >
> > > > > Co-developed-by: Arnd Bergmann <[email protected]>
> > > > > Signed-off-by: Arnd Bergmann <[email protected]>
> > > > > Signed-off-by: Niklas Schnelle <[email protected]>
> > > >
> > > > Hi Niklas,
> > > >
> > > > The change itself is fine, but please update the description to reflect
> > > > that this is adding a depends on HAS_IOPORT_MAP rather than HAS_IOPORT,
> > > > along with the reason why it's needed (i.e. devm_ioport_map() is used).
> > > >
> > > > Thanks,
> > > >
> > > > William Breathitt Gray
> > > >
> > > >
> > >
> > > Right, this clearly needs adjustment. I went with the following commit
> > > message for v5:
> > >
> > > "counter: add HAS_IOPORT_MAP dependency
> > >
> > > The 104_QUAD_8 counter driver uses devm_ioport_map() without depending
> > > on HAS_IOPORT_MAP. This causes compilation to fail on platforms such as
> > > s390 which do not support I/O port mapping. Add the missing
> > > HAS_IOPORT_MAP dependency to fix this."
> > >
> >
> > Just noticed this isn't entirely correct. As devm_ioport_map() has an
> > empty stub for HAS_IOPORT_MAP=n this doesn't lead to a compile error it
> > just doesn't work. Will reword to "This causes the driver to not be
> > useable on platforms ..."
>
> s/useable/usable/
104_QUAD_8 has an explicit dependency on PC104 and X86, so I don't think
it would ever be used outside of x86 platforms. Does it still make sense
to have the HAS_IOPORT_MAP dependency in this case?
William Breathitt Gray
On 5/16/23 14:24, Ville Syrjälä wrote:
> On Tue, May 16, 2023 at 01:00:33PM +0200, Niklas Schnelle wrote:
>> Just below the removed lines par->clk_wr_offset is hard coded to 3 so
>> there is no use in determining a different clock just to then ignore it
>> anyway. This also removes the only I/O port use remaining in the driver
>> allowing it to be built without CONFIG_HAS_IOPORT.
>>
>> Link: https://lore.kernel.org/all/[email protected]/
>> Suggested-by: Ville Syrjälä <[email protected]>
>> Signed-off-by: Niklas Schnelle <[email protected]>
>
> Reviewed-by: Ville Syrjälä <[email protected]>
>
>> ---
>> Note: The HAS_IOPORT Kconfig option was added in v6.4-rc1 so
>> per-subsystem patches may be applied independently
applied this patch to fbdev git tree.
Thanks!
Helge
>>
>> drivers/video/fbdev/aty/atyfb_base.c | 5 -----
>> 1 file changed, 5 deletions(-)
>>
>> diff --git a/drivers/video/fbdev/aty/atyfb_base.c b/drivers/video/fbdev/aty/atyfb_base.c
>> index b02e4e645035..cba2b113b28b 100644
>> --- a/drivers/video/fbdev/aty/atyfb_base.c
>> +++ b/drivers/video/fbdev/aty/atyfb_base.c
>> @@ -3498,11 +3498,6 @@ static int atyfb_setup_generic(struct pci_dev *pdev, struct fb_info *info,
>> if (ret)
>> goto atyfb_setup_generic_fail;
>> #endif
>> - if (!(aty_ld_le32(CRTC_GEN_CNTL, par) & CRTC_EXT_DISP_EN))
>> - par->clk_wr_offset = (inb(R_GENMO) & 0x0CU) >> 2;
>> - else
>> - par->clk_wr_offset = aty_ld_8(CLOCK_CNTL, par) & 0x03U;
>> -
>> /* according to ATI, we should use clock 3 for acelerated mode */
>> par->clk_wr_offset = 3;
>>
>> --
>> 2.39.2
>
On Tue, 16 May 2023 13:00:08 +0200
Niklas Schnelle <[email protected]> wrote:
> In a future patch HAS_IOPORT=n will result in inb()/outb() and friends
> not being declared. We thus need to add HAS_IOPORT as dependency for
> those drivers using them.
>
> Acked-by: Jonathan Cameron <[email protected]>
> Co-developed-by: Arnd Bergmann <[email protected]>
> Signed-off-by: Arnd Bergmann <[email protected]>
> Signed-off-by: Niklas Schnelle <[email protected]>
Applied to the togreg branch of iio.git and pushed out as testing for
0-day to take a first look at it.
Thanks
Jonathan
> ---
> Note: The HAS_IOPORT Kconfig option was added in v6.4-rc1 so
> per-subsystem patches may be applied independently
>
> drivers/iio/adc/Kconfig | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig
> index eb2b09ef5d5b..53098aca06ea 100644
> --- a/drivers/iio/adc/Kconfig
> +++ b/drivers/iio/adc/Kconfig
> @@ -145,7 +145,7 @@ config AD7606
>
> config AD7606_IFACE_PARALLEL
> tristate "Analog Devices AD7606 ADC driver with parallel interface support"
> - depends on HAS_IOMEM
> + depends on HAS_IOPORT
> select AD7606
> help
> Say yes here to build parallel interface support for Analog Devices:
On Fri, 2023-05-19 at 10:21 -0400, William Breathitt Gray wrote:
> On Fri, May 19, 2023 at 03:39:57PM +0200, Niklas Schnelle wrote:
> > On Fri, 2023-05-19 at 15:38 +0200, Niklas Schnelle wrote:
> > > On Fri, 2023-05-19 at 15:17 +0200, Niklas Schnelle wrote:
> > > > On Thu, 2023-05-18 at 21:26 -0400, William Breathitt Gray wrote:
> > > > > On Tue, May 16, 2023 at 01:00:01PM +0200, Niklas Schnelle wrote:
> > > > > > In a future patch HAS_IOPORT=n will result in inb()/outb() and friends
> > > > > > not being declared. We thus need to add HAS_IOPORT as dependency for
> > > > > > those drivers using them.
> > > > > >
> > > > > > Co-developed-by: Arnd Bergmann <[email protected]>
> > > > > > Signed-off-by: Arnd Bergmann <[email protected]>
> > > > > > Signed-off-by: Niklas Schnelle <[email protected]>
> > > > >
> > > > > Hi Niklas,
> > > > >
> > > > > The change itself is fine, but please update the description to reflect
> > > > > that this is adding a depends on HAS_IOPORT_MAP rather than HAS_IOPORT,
> > > > > along with the reason why it's needed (i.e. devm_ioport_map() is used).
> > > > >
> > > > > Thanks,
> > > > >
> > > > > William Breathitt Gray
> > > > >
> > > > >
> > > >
> > > > Right, this clearly needs adjustment. I went with the following commit
> > > > message for v5:
> > > >
> > > > "counter: add HAS_IOPORT_MAP dependency
> > > >
> > > > The 104_QUAD_8 counter driver uses devm_ioport_map() without depending
> > > > on HAS_IOPORT_MAP. This causes compilation to fail on platforms such as
> > > > s390 which do not support I/O port mapping. Add the missing
> > > > HAS_IOPORT_MAP dependency to fix this."
> > > >
> > >
> > > Just noticed this isn't entirely correct. As devm_ioport_map() has an
> > > empty stub for HAS_IOPORT_MAP=n this doesn't lead to a compile error it
> > > just doesn't work. Will reword to "This causes the driver to not be
> > > useable on platforms ..."
> >
> > s/useable/usable/
>
> 104_QUAD_8 has an explicit dependency on PC104 and X86, so I don't think
> it would ever be used outside of x86 platforms. Does it still make sense
> to have the HAS_IOPORT_MAP dependency in this case?
>
> William Breathitt Gray
Well, yes and no, you're right that it doesn't really cause compile
issues despite the "|| COMPILE_TEST" albeit the code could never work.
Still, I'd add the dependency. At the very least it serves as
documentation and maybe in the future someone will want to remove those
empty stubs for HAS_IOPORT_MAP=n.
Thanks
Niklas
On Mon, May 22, 2023 at 12:42:15PM +0200, Niklas Schnelle wrote:
> On Fri, 2023-05-19 at 10:21 -0400, William Breathitt Gray wrote:
> > On Fri, May 19, 2023 at 03:39:57PM +0200, Niklas Schnelle wrote:
> > > On Fri, 2023-05-19 at 15:38 +0200, Niklas Schnelle wrote:
> > > > On Fri, 2023-05-19 at 15:17 +0200, Niklas Schnelle wrote:
> > > > > On Thu, 2023-05-18 at 21:26 -0400, William Breathitt Gray wrote:
> > > > > > On Tue, May 16, 2023 at 01:00:01PM +0200, Niklas Schnelle wrote:
> > > > > > > In a future patch HAS_IOPORT=n will result in inb()/outb() and friends
> > > > > > > not being declared. We thus need to add HAS_IOPORT as dependency for
> > > > > > > those drivers using them.
> > > > > > >
> > > > > > > Co-developed-by: Arnd Bergmann <[email protected]>
> > > > > > > Signed-off-by: Arnd Bergmann <[email protected]>
> > > > > > > Signed-off-by: Niklas Schnelle <[email protected]>
> > > > > >
> > > > > > Hi Niklas,
> > > > > >
> > > > > > The change itself is fine, but please update the description to reflect
> > > > > > that this is adding a depends on HAS_IOPORT_MAP rather than HAS_IOPORT,
> > > > > > along with the reason why it's needed (i.e. devm_ioport_map() is used).
> > > > > >
> > > > > > Thanks,
> > > > > >
> > > > > > William Breathitt Gray
> > > > > >
> > > > > >
> > > > >
> > > > > Right, this clearly needs adjustment. I went with the following commit
> > > > > message for v5:
> > > > >
> > > > > "counter: add HAS_IOPORT_MAP dependency
> > > > >
> > > > > The 104_QUAD_8 counter driver uses devm_ioport_map() without depending
> > > > > on HAS_IOPORT_MAP. This causes compilation to fail on platforms such as
> > > > > s390 which do not support I/O port mapping. Add the missing
> > > > > HAS_IOPORT_MAP dependency to fix this."
> > > > >
> > > >
> > > > Just noticed this isn't entirely correct. As devm_ioport_map() has an
> > > > empty stub for HAS_IOPORT_MAP=n this doesn't lead to a compile error it
> > > > just doesn't work. Will reword to "This causes the driver to not be
> > > > useable on platforms ..."
> > >
> > > s/useable/usable/
> >
> > 104_QUAD_8 has an explicit dependency on PC104 and X86, so I don't think
> > it would ever be used outside of x86 platforms. Does it still make sense
> > to have the HAS_IOPORT_MAP dependency in this case?
> >
> > William Breathitt Gray
>
> Well, yes and no, you're right that it doesn't really cause compile
> issues despite the "|| COMPILE_TEST" albeit the code could never work.
> Still, I'd add the dependency. At the very least it serves as
> documentation and maybe in the future someone will want to remove those
> empty stubs for HAS_IOPORT_MAP=n.
>
> Thanks
> Niklas
Sure, that reasoning makes sense to me too, so let's go with the
explicit depends afterall.
By the way, I noticed two other modules that call devm_ioport_map() but
seem to be missing the HAS_IOPORT_MAP depends lines: the
drivers/iio/addac/stx104.c and drivers/iio/dac/cio-dac.c drivers. Do
these need respective patches as well?
As an aside, I haven't been following the previous patchsets closely so
forgive me if this has already been discussed in another thread: why
doesn't X86 automatically select HAS_IOPORT? Are there x86 platforms
that do not support ioport?
William Breathitt Gray
On Tue, May 16, 2023 at 01:00:29PM +0200, Niklas Schnelle wrote:
> In a future patch HAS_IOPORT=n will result in inb()/outb() and friends
> not being declared. We thus need to add HAS_IOPORT as dependency for
> those drivers using them unconditionally. For 8250 based drivers some
> support MMIO only use so fence only the parts requiring I/O ports.
Why can't you have dummy inb()/outb() so we don't need these #ifdefs all
over the place in .c files? Was that documented somewhere? We do that
for other driver/hardware apis, why are these so special they don't
deserve that?
Otherwise this makes old drivers really messy with these additional
#ifdefs, something we never wanted to do in .c files.
thanks,
greg k-h
On Tue, 2023-05-16 at 13:00 +0200, Niklas Schnelle wrote:
> In a future patch HAS_IOPORT=n will result in inb()/outb() and friends
> not being declared. In the pci-quirks case the I/O port acceses are
> used in the quirks for several AMD south bridges. Move unrelated
> ASMEDIA quirks out of the way and introduce an additional config option
> for the AMD quirks that depends on HAS_IOPORT.
>
> Co-developed-by: Arnd Bergmann <[email protected]>
> Signed-off-by: Arnd Bergmann <[email protected]>
> Signed-off-by: Niklas Schnelle <[email protected]>
> ---
> Note: The HAS_IOPORT Kconfig option was added in v6.4-rc1 so
> per-subsystem patches may be applied independently
>
> drivers/usb/Kconfig | 10 +++
> drivers/usb/core/hcd-pci.c | 2 +
> drivers/usb/host/pci-quirks.c | 125 ++++++++++++++++++----------------
> drivers/usb/host/pci-quirks.h | 30 ++++++--
> 4 files changed, 101 insertions(+), 66 deletions(-)
>
> diff --git a/drivers/usb/Kconfig b/drivers/usb/Kconfig
> index 7f33bcc315f2..765093112ed8 100644
> --- a/drivers/usb/Kconfig
> +++ b/drivers/usb/Kconfig
>
---8<---
>
> static inline int io_type_enabled(struct pci_dev *pdev, unsigned int mask)
> {
> @@ -723,6 +728,7 @@ static inline int io_type_enabled(struct pci_dev *pdev, unsigned int mask)
>
> static void quirk_usb_handoff_uhci(struct pci_dev *pdev)
> {
> +#ifdef CONFIG_HAS_IOPORT
> unsigned long base = 0;
> int i;
>
> @@ -737,6 +743,7 @@ static void quirk_usb_handoff_uhci(struct pci_dev *pdev)
>
> if (base)
> uhci_check_and_reset_hc(pdev, base);
I got a kernel test robot message for the above function call being
undefined on an ARM config. Will have to investigate the details but I
think this is still missing a stub or an #ifdef here.
> +#endif /* CONFIG_HAS_IOPORT */
> }
>
> static int mmio_resource_enabled(struct pci_dev *pdev, int idx)
---8<---
On Tue, May 30, 2023, at 12:48, Greg Kroah-Hartman wrote:
> On Tue, May 16, 2023 at 01:00:29PM +0200, Niklas Schnelle wrote:
>> In a future patch HAS_IOPORT=n will result in inb()/outb() and friends
>> not being declared. We thus need to add HAS_IOPORT as dependency for
>> those drivers using them unconditionally. For 8250 based drivers some
>> support MMIO only use so fence only the parts requiring I/O ports.
>
> Why can't you have dummy inb()/outb() so we don't need these #ifdefs all
> over the place in .c files? Was that documented somewhere? We do that
> for other driver/hardware apis, why are these so special they don't
> deserve that?
That was what our original approach did years ago, and Linus rightfully
rejected it. Almost every driver either requires inb()/outb() to do
anything, or it doesn't use them at all. The 8250 uart is one of the
few exceptions to this, as it has many variants.
It would be possible to separate this out more in the 8250 driver
as well and split it out into separate modules and indirect function
pointers, but that would be a larger rework and have a higher
risk of regressions.
Also, the 8250 driver is already full of #ifdef in .c files,
Arnd
On Tue, May 30, 2023 at 01:53:50PM +0200, Arnd Bergmann wrote:
> On Tue, May 30, 2023, at 12:48, Greg Kroah-Hartman wrote:
> > On Tue, May 16, 2023 at 01:00:29PM +0200, Niklas Schnelle wrote:
> >> In a future patch HAS_IOPORT=n will result in inb()/outb() and friends
> >> not being declared. We thus need to add HAS_IOPORT as dependency for
> >> those drivers using them unconditionally. For 8250 based drivers some
> >> support MMIO only use so fence only the parts requiring I/O ports.
> >
> > Why can't you have dummy inb()/outb() so we don't need these #ifdefs all
> > over the place in .c files? Was that documented somewhere? We do that
> > for other driver/hardware apis, why are these so special they don't
> > deserve that?
>
> That was what our original approach did years ago, and Linus rightfully
> rejected it. Almost every driver either requires inb()/outb() to do
> anything, or it doesn't use them at all. The 8250 uart is one of the
> few exceptions to this, as it has many variants.
> It would be possible to separate this out more in the 8250 driver
> as well and split it out into separate modules and indirect function
> pointers, but that would be a larger rework and have a higher
> risk of regressions.
>
> Also, the 8250 driver is already full of #ifdef in .c files,
Yeah, just trying to hope it could be better :(
Ok, I'll go queue up the v5 version of this patch now, thanks.
greg k-h
Hello!
On 5/16/23 1:59 PM, Niklas Schnelle wrote:
> In a future patch HAS_IOPORT=n will result in inb()/outb() and friends
> not being declared. We thus need to add HAS_IOPORT as dependency for
> those drivers using them.
>
> Co-developed-by: Arnd Bergmann <[email protected]>
> Signed-off-by: Arnd Bergmann <[email protected]>
> Acked-by: Damien Le Moal <[email protected]>
> Signed-off-by: Niklas Schnelle <[email protected]>
> ---
> Note: The HAS_IOPORT Kconfig option was added in v6.4-rc1 so
> per-subsystem patches may be applied independently
>
> drivers/ata/Kconfig | 28 ++++++++++++++--------------
> drivers/ata/ata_generic.c | 2 ++
> drivers/ata/libata-sff.c | 2 ++
> include/linux/libata.h | 2 ++
> 4 files changed, 20 insertions(+), 14 deletions(-)
>
> diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
> index 42b51c9812a0..c521cdc51f8c 100644
> --- a/drivers/ata/Kconfig
> +++ b/drivers/ata/Kconfig
[...]
Shouldn't there be an entry for the ATIIXP driver here? It doesn't
call in*/out*() but it does call ata_bmdma_{start|stop}() that call
ioread*/iowrite*()...
And shouldn't there be an entry for APT867x driver too? It does call
ioread*/iowrite*()...
[...]
Shouldn't there be an entry for the HPT3x3 driver too? It does call
ioread*/iowrite*()... and also for the IT821x driver? And the Marvall
driver?
> @@ -819,7 +819,7 @@ config PATA_MPC52xx
>
> config PATA_NETCELL
> tristate "NETCELL Revolution RAID support"
> - depends on PCI
> + depends on PCI && HAS_IOPORT
Not clear why -- because it calls ata_pci_bmdma_clear_simplex()?
[...]
Shouldn't there be an entry for the NS87415 driver too? It does
call ioread*/iowrite*()...
[...]
> @@ -919,7 +919,7 @@ config PATA_SCH
>
> config PATA_SERVERWORKS
> tristate "SERVERWORKS OSB4/CSB5/CSB6/HT1000 PATA support"
> - depends on PCI
> + depends on PCI && HAS_IOPORT
Not clear why -- because it calls ata_pci_bmdma_clear_simplex()?
[...]
Shouldn't there be an entry for the VIA driver too? It does call
ioread*/iowrite*()... and SiL680 driver too... and Winbond SL82C105
driver too... and OPTi PIO driver too... and PCMCIA driver too...
[...]
> @@ -1183,7 +1183,7 @@ config ATA_GENERIC
>
> config PATA_LEGACY
> tristate "Legacy ISA PATA support (Experimental)"
> - depends on (ISA || PCI)
> + depends on (ISA || PCI) && HAS_IOPORT
> select PATA_TIMINGS
Hm, won't it override the HAS_IOPORT dependency, if you enable
PATA_QDI or PATA_WINBOD_VLB?
> help
> This option enables support for ISA/VLB/PCI bus legacy PATA
> diff --git a/drivers/ata/ata_generic.c b/drivers/ata/ata_generic.c
> index 2f57ec00ab82..2d391d117f74 100644
> --- a/drivers/ata/ata_generic.c
> +++ b/drivers/ata/ata_generic.c
This driver calls ioread8() as well...
> @@ -197,8 +197,10 @@ static int ata_generic_init_one(struct pci_dev *dev, const struct pci_device_id
> if (!(command & PCI_COMMAND_IO))
> return -ENODEV;
>
> +#ifdef CONFIG_PATA_ALI
This #ifdef doesn't make sense to me -- pata_ali.c will call
the below function anyway, no?
> if (dev->vendor == PCI_VENDOR_ID_AL)
> ata_pci_bmdma_clear_simplex(dev);
> +#endif /* CONFIG_PATA_ALI */
> if (dev->vendor == PCI_VENDOR_ID_ATI) {
> int rc = pcim_enable_device(dev);
> diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c
> index 9d28badfe41d..80137edb7ebf 100644
> --- a/drivers/ata/libata-sff.c
> +++ b/drivers/ata/libata-sff.c
> @@ -3031,6 +3031,7 @@ EXPORT_SYMBOL_GPL(ata_bmdma_port_start32);
>
> #ifdef CONFIG_PCI
>
> +#ifdef CONFIG_HAS_IOPORT
> /**
> * ata_pci_bmdma_clear_simplex - attempt to kick device out of simplex
> * @pdev: PCI device
> @@ -3056,6 +3057,7 @@ int ata_pci_bmdma_clear_simplex(struct pci_dev *pdev)
> return 0;
> }
> EXPORT_SYMBOL_GPL(ata_pci_bmdma_clear_simplex);
> +#endif /* CONFIG_HAS_IOPORT */
>
> static void ata_bmdma_nodma(struct ata_host *host, const char *reason)
> {
> diff --git a/include/linux/libata.h b/include/linux/libata.h
> index 311cd93377c7..90002d4a785b 100644
> --- a/include/linux/libata.h
> +++ b/include/linux/libata.h
> @@ -2012,7 +2012,9 @@ extern int ata_bmdma_port_start(struct ata_port *ap);
> extern int ata_bmdma_port_start32(struct ata_port *ap);
>
> #ifdef CONFIG_PCI
> +#ifdef CONFIG_HAS_IOPORT
> extern int ata_pci_bmdma_clear_simplex(struct pci_dev *pdev);
> +#endif /* CONFIG_HAS_IOPORT */
Hm, wouldn't it be better if you used #else and declare an inline
variant of this function simply retirning an error?
[...]
MBR, Sergey
On Tue, May 16, 2023 at 01:00:07PM +0200, Niklas Schnelle wrote:
> In a future patch HAS_IOPORT=n will result in inb()/outb() and friends
> not being declared. We thus need to add HAS_IOPORT as dependency for
> those drivers using them.
>
> Co-developed-by: Arnd Bergmann <[email protected]>
> Signed-off-by: Arnd Bergmann <[email protected]>
> Signed-off-by: Niklas Schnelle <[email protected]>
What has changed since V3? I didn't get the coverletter...
Hello Wolfram,
On Mon, Jun 05, 2023 at 12:12:35PM +0200, Wolfram Sang wrote:
> On Tue, May 16, 2023 at 01:00:07PM +0200, Niklas Schnelle wrote:
> > In a future patch HAS_IOPORT=n will result in inb()/outb() and friends
> > not being declared. We thus need to add HAS_IOPORT as dependency for
> > those drivers using them.
> >
> > Co-developed-by: Arnd Bergmann <[email protected]>
> > Signed-off-by: Arnd Bergmann <[email protected]>
> > Signed-off-by: Niklas Schnelle <[email protected]>
>
> What has changed since V3? I didn't get the coverletter...
lore has it:
https://lore.kernel.org/all/[email protected]/
(Found via: https://lore.kernel.org/all/ZH21E3Obp+YPJHkl@shikoro where
the last part of the URL is the Message-Id of your mail.)
Best regards
Uwe
--
Pengutronix e.K. | Uwe Kleine-K?nig |
Industrial Linux Solutions | https://www.pengutronix.de/ |
On Mon, 2023-06-05 at 12:12 +0200, Wolfram Sang wrote:
> On Tue, May 16, 2023 at 01:00:07PM +0200, Niklas Schnelle wrote:
> > In a future patch HAS_IOPORT=n will result in inb()/outb() and friends
> > not being declared. We thus need to add HAS_IOPORT as dependency for
> > those drivers using them.
> >
> > Co-developed-by: Arnd Bergmann <[email protected]>
> > Signed-off-by: Arnd Bergmann <[email protected]>
> > Signed-off-by: Niklas Schnelle <[email protected]>
>
> What has changed since V3? I didn't get the coverletter...
>
The series is actually now at v5 that can be found in its entirety
here:
https://lore.kernel.org/all/[email protected]/
I believe there were no changes for the i2c portion since v3. Other
that with the HAS_IOPORT Kconfig option merged the per-subsystem
patches are now independent and can be merged directly.
Thanks,
Niklas
> (Found via: https://lore.kernel.org/all/ZH21E3Obp+YPJHkl@shikoro where
> the last part of the URL is the Message-Id of your mail.)
I know how I could get it. Just, for scaling reasons it is better if
people send it right away. OK, I should have said that directly :)
Please send also cover-letters to mailing lists.
Hi,
> I believe there were no changes for the i2c portion since v3. Other
> that with the HAS_IOPORT Kconfig option merged the per-subsystem
> patches are now independent and can be merged directly.
Thanks for the feedback.
Only issue is then that PARPORT is still in there. Didn't you want to
drop it as mentioned in http://patchwork.ozlabs.org/project/linux-i2c/patch/[email protected]/ ?
And from the same mail, did you reach a conclusion what to do with the
ocores driver?
Happy hacking,
Wolfram