This is the start of the stable review cycle for the 3.18.126 release.
There are 90 patches in this series, all will be posted as a response
to this one. If anyone has any issues with these being applied, please
let me know.
Responses should be made by Wed Nov 21 16:25:28 UTC 2018.
Anything received after that time might be too late.
The whole patch series can be found in one patch at:
https://www.kernel.org/pub/linux/kernel/v3.x/stable-review/patch-3.18.126-rc1.gz
or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-3.18.y
and the diffstat can be found below.
thanks,
greg k-h
-------------
Pseudo-Shortlog of commits:
Greg Kroah-Hartman <[email protected]>
Linux 3.18.126-rc1
Mike Kravetz <[email protected]>
hugetlbfs: fix kernel BUG at fs/hugetlbfs/inode.c:444!
Guenter Roeck <[email protected]>
configfs: replace strncpy with memcpy
Miklos Szeredi <[email protected]>
fuse: fix leaked notify reply
Frank Sorenson <[email protected]>
sunrpc: correct the computation for page_ptr when truncating
Eric W. Biederman <[email protected]>
mount: Prevent MNT_DETACH from disconnecting locked mounts
Eric W. Biederman <[email protected]>
mount: Don't allow copying MNT_UNBINDABLE|MNT_LOCKED mounts
Eric W. Biederman <[email protected]>
mount: Retest MNT_LOCKED in do_umount
Vasily Averin <[email protected]>
ext4: fix buffer leak in __ext4_read_dirblock() on error path
Vasily Averin <[email protected]>
ext4: fix buffer leak in ext4_xattr_move_to_block() on error path
Vasily Averin <[email protected]>
ext4: release bs.bh before re-using in ext4_xattr_block_find()
Theodore Ts'o <[email protected]>
ext4: fix possible leak of sbi->s_group_desc_leak in error path
Theodore Ts'o <[email protected]>
ext4: avoid possible double brelse() in add_new_gdb() on error path
Vasily Averin <[email protected]>
ext4: fix missing cleanup if ext4_alloc_flex_bg_array() fails while resizing
Vasily Averin <[email protected]>
ext4: avoid buffer leak in ext4_orphan_add() after prior errors
Vasily Averin <[email protected]>
ext4: fix possible inode leak in the retry loop of ext4_resize_fs()
Vasily Averin <[email protected]>
ext4: avoid potential extra brelse in setup_new_flex_group_blocks()
Vasily Averin <[email protected]>
ext4: add missing brelse() add_new_gdb_meta_bg()'s error path
Vasily Averin <[email protected]>
ext4: add missing brelse() in set_flexbg_block_bitmap()'s error path
Vasily Averin <[email protected]>
ext4: add missing brelse() update_backups()'s error path
H. Peter Anvin (Intel) <[email protected]>
arch/alpha, termios: implement BOTHER, IBSHIFT and termios2
H. Peter Anvin <[email protected]>
termios, tty/tty_baudrate.c: fix buffer overrun
Arnd Bergmann <[email protected]>
mtd: docg3: don't set conflicting BCH_CONST_PARAMS option
Changwei Ge <[email protected]>
ocfs2: fix a misuse a of brelse after failing ocfs2_check_dir_entry
Mikulas Patocka <[email protected]>
mach64: fix image corruption due to reading accelerator registers
Mikulas Patocka <[email protected]>
mach64: fix display corruption on big endian machines
Ilya Dryomov <[email protected]>
libceph: bump CEPH_MSG_MAX_DATA_LEN
Krzysztof Kozlowski <[email protected]>
clk: s2mps11: Fix matching when built as module and DT node contains compatible
Max Filippov <[email protected]>
xtensa: fix boot parameters address translation
Young_X <[email protected]>
cdrom: fix improper type cast, which can leat to information leak.
Dominique Martinet <[email protected]>
9p: clear dangling pointers in p9stat_free
Marco Felsch <[email protected]>
media: tvp5150: fix width alignment during set_selection()
Joel Stanley <[email protected]>
powerpc/boot: Ensure _zimage_start is a weak symbol
Dengcheng Zhu <[email protected]>
MIPS: kexec: Mark CPU offline before disabling local IRQ
Nicholas Mc Guire <[email protected]>
media: pci: cx23885: handle adding to list failure
Tomi Valkeinen <[email protected]>
drm/omap: fix memory barrier bug in DMM driver
Daniel Axtens <[email protected]>
powerpc/nohash: fix undefined behaviour when testing page size support
Miles Chen <[email protected]>
tty: check name length in tty_find_polling_driver()
Corey Wright <[email protected]>
dm: remove duplicate dm_get_live_table() in __dm_destroy()
Nicolas Pitre <[email protected]>
Cramfs: fix abad comparison when wrap-arounds occur
Mauro Carvalho Chehab <[email protected]>
media: em28xx: make v4l2-compliance happier by starting sequence on zero
Mauro Carvalho Chehab <[email protected]>
media: em28xx: fix input name for Terratec AV 350
Mauro Carvalho Chehab <[email protected]>
media: em28xx: use a default format if TRY_FMT fails
He Zhe <[email protected]>
kgdboc: Passing ekgdboc to command line causes panic
Maciej W. Rozycki <[email protected]>
TC: Set DMA masks for devices
Wenwen Wang <[email protected]>
dm ioctl: harden copy_params()'s copy_from_user() from malicious users
Amir Goldstein <[email protected]>
lockd: fix access beyond unterminated strings in prints
Trond Myklebust <[email protected]>
nfsd: Fix an Oops in free_session()
Trond Myklebust <[email protected]>
NFSv4.1: Fix the r/wsize checking
He Zhe <[email protected]>
printk: Fix panic caused by passing log_buf_len to command line
Steve French <[email protected]>
smb3: on kerberos mount if server doesn't specify auth type use krb5
Steve French <[email protected]>
smb3: do not attempt cifs operation in smb3 query info error path
Steve French <[email protected]>
smb3: allow stats which track session and share reconnects to be reset
Andreas Kemnade <[email protected]>
w1: omap-hdq: fix missing bus unregister at removal
Eugen Hristev <[email protected]>
iio: adc: at91: fix wrong channel number in triggered buffer mode
Eugen Hristev <[email protected]>
iio: adc: at91: fix acking DRDY irq on simple conversions
Arnd Bergmann <[email protected]>
kbuild: fix kernel/bounds.c 'W=1' warning
Eric Biggers <[email protected]>
ima: fix showing large 'violations' or 'runtime_measurements_count'
Ondrej Mosnacek <[email protected]>
crypto: lrw - Fix out-of bounds access on counter overflow
Eric W. Biederman <[email protected]>
signal/GenWQE: Fix sending of SIGKILL
Lukas Czerner <[email protected]>
ext4: initialize retries variable in ext4_da_write_inline_data_begin()
Al Viro <[email protected]>
gfs2_meta: ->mount() can get NULL dev_name
Jan Kara <[email protected]>
jbd2: fix use after free in jbd2_log_do_checkpoint()
Stefan Nuernberger <[email protected]>
net/ipv4: defensive cipso option parsing
Eric W. Biederman <[email protected]>
signal: Always deliver the kernel's SIGKILL and SIGSTOP to a pid namespace init
James Smart <[email protected]>
scsi: lpfc: Correct soft lockup when running mds diagnostics
Alexandre Belloni <[email protected]>
uio: ensure class is registered before devices
Loic Poulain <[email protected]>
usb: chipidea: Prevent unbalanced IRQ disable
Theodore Ts'o <[email protected]>
ext4: fix argument checking in EXT4_IOC_MOVE_EXT
Finn Thain <[email protected]>
scsi: esp_scsi: Track residual for PIO transfers
Martin Willi <[email protected]>
ath10k: schedule hardware restart if WMI command times out
Masami Hiramatsu <[email protected]>
kprobes: Return error if we fail to reuse kprobe instead of BUG_ON()
Ben Hutchings <[email protected]>
x86: boot: Fix EFI stub alignment
Lubomir Rintel <[email protected]>
x86/olpc: Indicate that legacy PC XO-1 platform should not register RTC
Yu Zhao <[email protected]>
mmc: sdhci-pci-o2micro: Add quirk for O2 Micro dev 0x8620 rev 0x01
Prarit Bhargava <[email protected]>
cpupower: Fix coredump on VMWare
Sanskriti Sharma <[email protected]>
perf tools: Cleanup trace-event-info 'tdata' leak
Sanskriti Sharma <[email protected]>
perf tools: Free temporary 'sys' string in read_event_files()
Serhey Popovych <[email protected]>
tun: Consistently configure generic netdev params via rtnetlink
Omar Sandoval <[email protected]>
swim: fix cleanup on setup error
Omar Sandoval <[email protected]>
ataflop: fix error handling during setup
Waiman Long <[email protected]>
locking/lockdep: Fix debug_locks off performance problem
Masami Hiramatsu <[email protected]>
selftests: ftrace: Add synthetic event syntax testcase
Nathan Chancellor <[email protected]>
net: qla3xxx: Remove overflowing shift statement
David S. Miller <[email protected]>
sparc: Throttle perf events properly.
David S. Miller <[email protected]>
sparc: Fix single-pcr perf event counter management.
He Zhe <[email protected]>
x86/corruption-check: Fix panic in memory_corruption_check() when boot option without value is provided
Alex Stanoev <[email protected]>
ALSA: ca0106: Disable IZD on SB0570 DAC to fix audio pops
Maciej S. Szmigiero <[email protected]>
pcmcia: Implement CLKRUN protocol disabling for Ricoh bridges
Hou Tao <[email protected]>
jffs2: free jffs2_sb_info through jffs2_kill_sb()
Tang Junhui <[email protected]>
bcache: fix miss key refill->end in writeback
-------------
Diffstat:
Makefile | 4 +-
arch/alpha/include/asm/termios.h | 8 ++-
arch/alpha/include/uapi/asm/ioctls.h | 5 ++
arch/alpha/include/uapi/asm/termbits.h | 17 +++++
arch/mips/kernel/crash.c | 3 +
arch/mips/kernel/machine_kexec.c | 3 +
arch/powerpc/boot/crt0.S | 4 +-
arch/powerpc/mm/tlb_nohash.c | 3 +
arch/sparc/kernel/perf_event.c | 26 +++++--
arch/x86/boot/tools/build.c | 7 ++
arch/x86/kernel/check.c | 15 ++++
arch/x86/platform/olpc/olpc-xo1-rtc.c | 3 +
arch/xtensa/kernel/head.S | 7 +-
crypto/lrw.c | 7 +-
drivers/block/ataflop.c | 25 ++++---
drivers/block/swim.c | 13 +++-
drivers/cdrom/cdrom.c | 2 +-
drivers/clk/clk-s2mps11.c | 30 ++++++++
drivers/gpu/drm/omapdrm/omap_dmm_tiler.c | 11 +++
drivers/iio/adc/at91_adc.c | 6 +-
drivers/md/bcache/btree.c | 2 +-
drivers/md/dm-ioctl.c | 18 ++---
drivers/md/dm.c | 1 -
drivers/media/i2c/tvp5150.c | 14 ++--
drivers/media/pci/cx23885/altera-ci.c | 10 +++
drivers/media/usb/em28xx/em28xx-cards.c | 4 +-
drivers/media/usb/em28xx/em28xx-video.c | 8 ++-
drivers/misc/genwqe/card_base.h | 2 +-
drivers/misc/genwqe/card_dev.c | 9 +--
drivers/mmc/host/sdhci-pci-o2micro.c | 3 +
drivers/mtd/devices/Kconfig | 2 +-
drivers/net/ethernet/qlogic/qla3xxx.c | 2 -
drivers/net/tun.c | 2 +
drivers/net/wireless/ath/ath10k/wmi.c | 6 ++
drivers/pcmcia/ricoh.h | 35 ++++++++++
drivers/pcmcia/yenta_socket.c | 3 +-
drivers/scsi/esp_scsi.c | 1 +
drivers/scsi/esp_scsi.h | 2 +
drivers/scsi/lpfc/lpfc_sli.c | 7 ++
drivers/scsi/mac_esp.c | 2 +
drivers/tc/tc.c | 8 ++-
drivers/tty/serial/kgdboc.c | 5 ++
drivers/tty/tty_io.c | 2 +-
drivers/tty/tty_ioctl.c | 4 +-
drivers/uio/uio.c | 9 +++
drivers/usb/chipidea/otg.h | 3 +-
drivers/video/fbdev/aty/mach64_accel.c | 28 ++++----
drivers/w1/masters/omap_hdq.c | 2 +
fs/cifs/cifs_debug.c | 3 +
fs/cifs/cifs_spnego.c | 6 +-
fs/cifs/inode.c | 10 ++-
fs/configfs/symlink.c | 2 +-
fs/cramfs/inode.c | 3 +-
fs/ext4/inline.c | 2 +-
fs/ext4/move_extent.c | 8 ++-
fs/ext4/namei.c | 5 +-
fs/ext4/resize.c | 28 ++++----
fs/ext4/super.c | 16 ++---
fs/ext4/xattr.c | 4 ++
fs/fuse/dev.c | 4 +-
fs/gfs2/ops_fstype.c | 3 +
fs/jbd2/checkpoint.c | 4 +-
fs/jffs2/super.c | 4 +-
fs/lockd/host.c | 2 +-
fs/namespace.c | 22 ++++--
fs/nfs/nfs4client.c | 16 +++--
fs/ocfs2/dir.c | 3 +-
include/linux/ceph/libceph.h | 8 ++-
include/linux/tc.h | 1 +
kernel/bounds.c | 4 +-
kernel/kprobes.c | 27 ++++++--
kernel/locking/lockdep.c | 4 +-
kernel/printk/printk.c | 7 +-
kernel/signal.c | 2 +-
lib/debug_locks.c | 2 +-
mm/hugetlb.c | 23 +++++--
net/9p/protocol.c | 5 ++
net/ipv4/cipso_ipv4.c | 11 +--
net/sunrpc/svc_xprt.c | 2 +-
net/sunrpc/xdr.c | 5 +-
security/integrity/ima/ima_fs.c | 6 +-
sound/pci/ca0106/ca0106.h | 2 +-
tools/perf/util/trace-event-info.c | 2 +
tools/perf/util/trace-event-read.c | 5 +-
tools/power/cpupower/utils/cpufreq-info.c | 2 +
tools/power/cpupower/utils/helpers/amd.c | 5 ++
.../inter-event/trigger-synthetic-event-syntax.tc | 80 ++++++++++++++++++++++
87 files changed, 581 insertions(+), 160 deletions(-)
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Omar Sandoval <[email protected]>
[ Upstream commit 1448a2a5360ae06f25e2edc61ae070dff5c0beb4 ]
If we fail to allocate the request queue for a disk, we still need to
free that disk, not just the previous ones. Additionally, we need to
cleanup the previous request queues.
Signed-off-by: Omar Sandoval <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/block/swim.c | 13 +++++++++++--
1 file changed, 11 insertions(+), 2 deletions(-)
--- a/drivers/block/swim.c
+++ b/drivers/block/swim.c
@@ -868,8 +868,17 @@ static int swim_floppy_init(struct swim_
exit_put_disks:
unregister_blkdev(FLOPPY_MAJOR, "fd");
- while (drive--)
- put_disk(swd->unit[drive].disk);
+ do {
+ struct gendisk *disk = swd->unit[drive].disk;
+
+ if (disk) {
+ if (disk->queue) {
+ blk_cleanup_queue(disk->queue);
+ disk->queue = NULL;
+ }
+ put_disk(disk);
+ }
+ } while (drive--);
return err;
}
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Sanskriti Sharma <[email protected]>
[ Upstream commit faedbf3fd19f2511a39397f76359e4cc6ee93072 ]
Free tracing_data structure in tracing_data_get() error paths.
Fixes the following coverity complaint:
Error: RESOURCE_LEAK (CWE-772):
leaked_storage: Variable "tdata" going out of scope leaks the storage
Signed-off-by: Sanskriti Sharma <[email protected]>
Reviewed-by: Jiri Olsa <[email protected]>
Cc: Joe Lawrence <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
tools/perf/util/trace-event-info.c | 2 ++
1 file changed, 2 insertions(+)
--- a/tools/perf/util/trace-event-info.c
+++ b/tools/perf/util/trace-event-info.c
@@ -513,12 +513,14 @@ struct tracing_data *tracing_data_get(st
"/tmp/perf-XXXXXX");
if (!mkstemp(tdata->temp_file)) {
pr_debug("Can't make temp file");
+ free(tdata);
return NULL;
}
temp_fd = open(tdata->temp_file, O_RDWR);
if (temp_fd < 0) {
pr_debug("Can't read '%s'", tdata->temp_file);
+ free(tdata);
return NULL;
}
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Lubomir Rintel <[email protected]>
[ Upstream commit d92116b800fb79a72ad26121f5011f6aa3ad94c2 ]
On OLPC XO-1, the RTC is discovered via device tree from the arch
initcall. Don't let the PC platform register another one from its device
initcall, it's not going to work:
sysfs: cannot create duplicate filename '/devices/platform/rtc_cmos'
CPU: 0 PID: 1 Comm: swapper Not tainted 4.19.0-rc6 #12
Hardware name: OLPC XO/XO, BIOS OLPC Ver 1.00.01 06/11/2014
Call Trace:
dump_stack+0x16/0x18
sysfs_warn_dup+0x46/0x58
sysfs_create_dir_ns+0x76/0x9b
kobject_add_internal+0xed/0x209
? __schedule+0x3fa/0x447
kobject_add+0x5b/0x66
device_add+0x298/0x535
? insert_resource_conflict+0x2a/0x3e
platform_device_add+0x14d/0x192
? io_delay_init+0x19/0x19
platform_device_register+0x1c/0x1f
add_rtc_cmos+0x16/0x31
do_one_initcall+0x78/0x14a
? do_early_param+0x75/0x75
kernel_init_freeable+0x152/0x1e0
? rest_init+0xa2/0xa2
kernel_init+0x8/0xd5
ret_from_fork+0x2e/0x38
kobject_add_internal failed for rtc_cmos with -EEXIST, don't try to
register things with the same name in the same directory.
platform rtc_cmos: registered platform RTC device (no PNP device found)
Signed-off-by: Lubomir Rintel <[email protected]>
Signed-off-by: Borislav Petkov <[email protected]>
Acked-by: Thomas Gleixner <[email protected]>
CC: "H. Peter Anvin" <[email protected]>
CC: Ingo Molnar <[email protected]>
CC: x86-ml <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/platform/olpc/olpc-xo1-rtc.c | 3 +++
1 file changed, 3 insertions(+)
--- a/arch/x86/platform/olpc/olpc-xo1-rtc.c
+++ b/arch/x86/platform/olpc/olpc-xo1-rtc.c
@@ -16,6 +16,7 @@
#include <asm/msr.h>
#include <asm/olpc.h>
+#include <asm/x86_init.h>
static void rtc_wake_on(struct device *dev)
{
@@ -75,6 +76,8 @@ static int __init xo1_rtc_init(void)
if (r)
return r;
+ x86_platform.legacy.rtc = 0;
+
device_init_wakeup(&xo1_rtc_device.dev, 1);
return 0;
}
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Loic Poulain <[email protected]>
[ Upstream commit 8b97d73c4d72a2abf58f8e49062a7ee1e5f1334e ]
The ChipIdea IRQ is disabled before scheduling the otg work and
re-enabled on otg work completion. However if the job is already
scheduled we have to undo the effect of disable_irq int order to
balance the IRQ disable-depth value.
Fixes: be6b0c1bd0be ("usb: chipidea: using one inline function to cover queue work operations")
Signed-off-by: Loic Poulain <[email protected]>
Signed-off-by: Peter Chen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/chipidea/otg.h | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/drivers/usb/chipidea/otg.h
+++ b/drivers/usb/chipidea/otg.h
@@ -20,7 +20,8 @@ void ci_handle_vbus_change(struct ci_hdr
static inline void ci_otg_queue_work(struct ci_hdrc *ci)
{
disable_irq_nosync(ci->irq);
- queue_work(ci->wq, &ci->work);
+ if (queue_work(ci->wq, &ci->work) == false)
+ enable_irq(ci->irq);
}
#endif /* __DRIVERS_USB_CHIPIDEA_OTG_H */
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Maciej S. Szmigiero <[email protected]>
commit 95691e3eddc41da2d1cd3cca51fecdfb46bd85bc upstream.
Currently, "disable_clkrun" yenta_socket module parameter is only
implemented for TI CardBus bridges.
Add also an implementation for Ricoh bridges that have the necessary
setting documented in publicly available datasheets.
Tested on a RL5C476II with a Sunrich C-160 CardBus NIC that doesn't work
correctly unless the CLKRUN protocol is disabled.
Let's also make it clear in its description that the "disable_clkrun"
module parameter only works on these two previously mentioned brands of
CardBus bridges.
Signed-off-by: Maciej S. Szmigiero <[email protected]>
Cc: [email protected]
Signed-off-by: Dominik Brodowski <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/pcmcia/ricoh.h | 35 +++++++++++++++++++++++++++++++++++
drivers/pcmcia/yenta_socket.c | 3 ++-
2 files changed, 37 insertions(+), 1 deletion(-)
--- a/drivers/pcmcia/ricoh.h
+++ b/drivers/pcmcia/ricoh.h
@@ -119,6 +119,10 @@
#define RL5C4XX_MISC_CONTROL 0x2F /* 8 bit */
#define RL5C4XX_ZV_ENABLE 0x08
+/* Misc Control 3 Register */
+#define RL5C4XX_MISC3 0x00A2 /* 16 bit */
+#define RL5C47X_MISC3_CB_CLKRUN_DIS BIT(1)
+
#ifdef __YENTA_H
#define rl_misc(socket) ((socket)->private[0])
@@ -156,6 +160,35 @@ static void ricoh_set_zv(struct yenta_so
}
}
+static void ricoh_set_clkrun(struct yenta_socket *socket, bool quiet)
+{
+ u16 misc3;
+
+ /*
+ * RL5C475II likely has this setting, too, however no datasheet
+ * is publicly available for this chip
+ */
+ if (socket->dev->device != PCI_DEVICE_ID_RICOH_RL5C476 &&
+ socket->dev->device != PCI_DEVICE_ID_RICOH_RL5C478)
+ return;
+
+ if (socket->dev->revision < 0x80)
+ return;
+
+ misc3 = config_readw(socket, RL5C4XX_MISC3);
+ if (misc3 & RL5C47X_MISC3_CB_CLKRUN_DIS) {
+ if (!quiet)
+ dev_dbg(&socket->dev->dev,
+ "CLKRUN feature already disabled\n");
+ } else if (disable_clkrun) {
+ if (!quiet)
+ dev_info(&socket->dev->dev,
+ "Disabling CLKRUN feature\n");
+ misc3 |= RL5C47X_MISC3_CB_CLKRUN_DIS;
+ config_writew(socket, RL5C4XX_MISC3, misc3);
+ }
+}
+
static void ricoh_save_state(struct yenta_socket *socket)
{
rl_misc(socket) = config_readw(socket, RL5C4XX_MISC);
@@ -172,6 +205,7 @@ static void ricoh_restore_state(struct y
config_writew(socket, RL5C4XX_16BIT_IO_0, rl_io(socket));
config_writew(socket, RL5C4XX_16BIT_MEM_0, rl_mem(socket));
config_writew(socket, RL5C4XX_CONFIG, rl_config(socket));
+ ricoh_set_clkrun(socket, true);
}
@@ -197,6 +231,7 @@ static int ricoh_override(struct yenta_s
config_writew(socket, RL5C4XX_CONFIG, config);
ricoh_set_zv(socket);
+ ricoh_set_clkrun(socket, false);
return 0;
}
--- a/drivers/pcmcia/yenta_socket.c
+++ b/drivers/pcmcia/yenta_socket.c
@@ -26,7 +26,8 @@
static bool disable_clkrun;
module_param(disable_clkrun, bool, 0444);
-MODULE_PARM_DESC(disable_clkrun, "If PC card doesn't function properly, please try this option");
+MODULE_PARM_DESC(disable_clkrun,
+ "If PC card doesn't function properly, please try this option (TI and Ricoh bridges only)");
static bool isa_probe = 1;
module_param(isa_probe, bool, 0444);
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: "David S. Miller" <[email protected]>
[ Upstream commit 455adb3174d2c8518cef1a61140c211f6ac224d2 ]
Like x86 and arm, call perf_sample_event_took() in perf event
NMI interrupt handler.
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/sparc/kernel/perf_event.c | 9 +++++++++
1 file changed, 9 insertions(+)
--- a/arch/sparc/kernel/perf_event.c
+++ b/arch/sparc/kernel/perf_event.c
@@ -23,6 +23,7 @@
#include <asm/cpudata.h>
#include <asm/uaccess.h>
#include <linux/atomic.h>
+#include <linux/sched/clock.h>
#include <asm/nmi.h>
#include <asm/pcr.h>
#include <asm/cacheflush.h>
@@ -1586,6 +1587,8 @@ static int __kprobes perf_event_nmi_hand
struct perf_sample_data data;
struct cpu_hw_events *cpuc;
struct pt_regs *regs;
+ u64 finish_clock;
+ u64 start_clock;
int i;
if (!atomic_read(&active_events))
@@ -1599,6 +1602,8 @@ static int __kprobes perf_event_nmi_hand
return NOTIFY_DONE;
}
+ start_clock = sched_clock();
+
regs = args->regs;
cpuc = this_cpu_ptr(&cpu_hw_events);
@@ -1637,6 +1642,10 @@ static int __kprobes perf_event_nmi_hand
sparc_pmu_stop(event, 0);
}
+ finish_clock = sched_clock();
+
+ perf_sample_event_took(finish_clock - start_clock);
+
return NOTIFY_STOP;
}
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: James Smart <[email protected]>
[ Upstream commit 0ef01a2d95fd62bb4f536e7ce4d5e8e74b97a244 ]
When running an mds diagnostic that passes frames with the switch, soft
lockups are detected. The driver is in a CQE processing loop and has
sufficient amount of traffic that it never exits the ring processing routine,
thus the "lockup".
Cap the number of elements in the work processing routine to 64 elements. This
ensures that the cpu will be given up and the handler reschedule to process
additional items.
Signed-off-by: Dick Kennedy <[email protected]>
Signed-off-by: James Smart <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/scsi/lpfc/lpfc_sli.c | 7 +++++++
1 file changed, 7 insertions(+)
--- a/drivers/scsi/lpfc/lpfc_sli.c
+++ b/drivers/scsi/lpfc/lpfc_sli.c
@@ -3441,6 +3441,7 @@ lpfc_sli_handle_slow_ring_event_s4(struc
struct hbq_dmabuf *dmabuf;
struct lpfc_cq_event *cq_event;
unsigned long iflag;
+ int count = 0;
spin_lock_irqsave(&phba->hbalock, iflag);
phba->hba_flag &= ~HBA_SP_QUEUE_EVT;
@@ -3462,16 +3463,22 @@ lpfc_sli_handle_slow_ring_event_s4(struc
if (irspiocbq)
lpfc_sli_sp_handle_rspiocb(phba, pring,
irspiocbq);
+ count++;
break;
case CQE_CODE_RECEIVE:
case CQE_CODE_RECEIVE_V1:
dmabuf = container_of(cq_event, struct hbq_dmabuf,
cq_event);
lpfc_sli4_handle_received_buffer(phba, dmabuf);
+ count++;
break;
default:
break;
}
+
+ /* Limit the number of events to 64 to avoid soft lockups */
+ if (count == 64)
+ break;
}
}
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Steve French <[email protected]>
commit 1e77a8c204c9d1b655c61751b8ad0fde22421dbb upstream.
If backupuid mount option is sent, we can incorrectly retry
(on access denied on query info) with a cifs (FindFirst) operation
on an smb3 mount which causes the server to force the session close.
We set backup intent on open so no need for this fallback.
See kernel bugzilla 201435
Signed-off-by: Steve French <[email protected]>
CC: Stable <[email protected]>
Reviewed-by: Ronnie Sahlberg <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/cifs/inode.c | 10 +++++++++-
1 file changed, 9 insertions(+), 1 deletion(-)
--- a/fs/cifs/inode.c
+++ b/fs/cifs/inode.c
@@ -741,7 +741,15 @@ cifs_get_inode_info(struct inode **inode
} else if (rc == -EREMOTE) {
cifs_create_dfs_fattr(&fattr, sb);
rc = 0;
- } else if (rc == -EACCES && backup_cred(cifs_sb)) {
+ } else if ((rc == -EACCES) && backup_cred(cifs_sb) &&
+ (strcmp(server->vals->version_string, SMB1_VERSION_STRING)
+ == 0)) {
+ /*
+ * For SMB2 and later the backup intent flag is already
+ * sent if needed on open and there is no path based
+ * FindFirst operation to use to retry with
+ */
+
srchinf = kzalloc(sizeof(struct cifs_search_info),
GFP_KERNEL);
if (srchinf == NULL) {
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: He Zhe <[email protected]>
commit 277fcdb2cfee38ccdbe07e705dbd4896ba0c9930 upstream.
log_buf_len_setup does not check input argument before passing it to
simple_strtoull. The argument would be a NULL pointer if "log_buf_len",
without its value, is set in command line and thus causes the following
panic.
PANIC: early exception 0xe3 IP 10:ffffffffaaeacd0d error 0 cr2 0x0
[ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 4.19.0-rc4-yocto-standard+ #1
[ 0.000000] RIP: 0010:_parse_integer_fixup_radix+0xd/0x70
...
[ 0.000000] Call Trace:
[ 0.000000] simple_strtoull+0x29/0x70
[ 0.000000] memparse+0x26/0x90
[ 0.000000] log_buf_len_setup+0x17/0x22
[ 0.000000] do_early_param+0x57/0x8e
[ 0.000000] parse_args+0x208/0x320
[ 0.000000] ? rdinit_setup+0x30/0x30
[ 0.000000] parse_early_options+0x29/0x2d
[ 0.000000] ? rdinit_setup+0x30/0x30
[ 0.000000] parse_early_param+0x36/0x4d
[ 0.000000] setup_arch+0x336/0x99e
[ 0.000000] start_kernel+0x6f/0x4ee
[ 0.000000] x86_64_start_reservations+0x24/0x26
[ 0.000000] x86_64_start_kernel+0x6f/0x72
[ 0.000000] secondary_startup_64+0xa4/0xb0
This patch adds a check to prevent the panic.
Link: http://lkml.kernel.org/r/[email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Signed-off-by: He Zhe <[email protected]>
Reviewed-by: Sergey Senozhatsky <[email protected]>
Signed-off-by: Petr Mladek <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
kernel/printk/printk.c | 7 ++++++-
1 file changed, 6 insertions(+), 1 deletion(-)
--- a/kernel/printk/printk.c
+++ b/kernel/printk/printk.c
@@ -844,7 +844,12 @@ static void __init log_buf_len_update(un
/* save requested log_buf_len since it's too early to process it */
static int __init log_buf_len_setup(char *str)
{
- unsigned size = memparse(str, &str);
+ unsigned int size;
+
+ if (!str)
+ return -EINVAL;
+
+ size = memparse(str, &str);
log_buf_len_update(size);
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Trond Myklebust <[email protected]>
commit 943cff67b842839f4f35364ba2db5c2d3f025d94 upstream.
The intention of nfs4_session_set_rwsize() was to cap the r/wsize to the
buffer sizes negotiated by the CREATE_SESSION. The initial code had a
bug whereby we would not check the values negotiated by nfs_probe_fsinfo()
(the assumption being that CREATE_SESSION will always negotiate buffer values
that are sane w.r.t. the server's preferred r/wsizes) but would only check
values set by the user in the 'mount' command.
The code was changed in 4.11 to _always_ set the r/wsize, meaning that we
now never use the server preferred r/wsizes. This is the regression that
this patch fixes.
Also rename the function to nfs4_session_limit_rwsize() in order to avoid
future confusion.
Fixes: 033853325fe3 (NFSv4.1 respect server's max size in CREATE_SESSION")
Cc: [email protected] # v4.11+
Signed-off-by: Trond Myklebust <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/nfs/nfs4client.c | 16 +++++++++-------
1 file changed, 9 insertions(+), 7 deletions(-)
--- a/fs/nfs/nfs4client.c
+++ b/fs/nfs/nfs4client.c
@@ -891,10 +891,10 @@ EXPORT_SYMBOL_GPL(nfs4_set_ds_client);
/*
* Session has been established, and the client marked ready.
- * Set the mount rsize and wsize with negotiated fore channel
- * attributes which will be bound checked in nfs_server_set_fsinfo.
+ * Limit the mount rsize, wsize and dtsize using negotiated fore
+ * channel attributes.
*/
-static void nfs4_session_set_rwsize(struct nfs_server *server)
+static void nfs4_session_limit_rwsize(struct nfs_server *server)
{
#ifdef CONFIG_NFS_V4_1
struct nfs4_session *sess;
@@ -907,9 +907,11 @@ static void nfs4_session_set_rwsize(stru
server_resp_sz = sess->fc_attrs.max_resp_sz - nfs41_maxread_overhead;
server_rqst_sz = sess->fc_attrs.max_rqst_sz - nfs41_maxwrite_overhead;
- if (!server->rsize || server->rsize > server_resp_sz)
+ if (server->dtsize > server_resp_sz)
+ server->dtsize = server_resp_sz;
+ if (server->rsize > server_resp_sz)
server->rsize = server_resp_sz;
- if (!server->wsize || server->wsize > server_rqst_sz)
+ if (server->wsize > server_rqst_sz)
server->wsize = server_rqst_sz;
#endif /* CONFIG_NFS_V4_1 */
}
@@ -956,12 +958,12 @@ static int nfs4_server_common_setup(stru
(unsigned long long) server->fsid.minor);
nfs_display_fhandle(mntfh, "Pseudo-fs root FH");
- nfs4_session_set_rwsize(server);
-
error = nfs_probe_fsinfo(server, mntfh, fattr);
if (error < 0)
goto out;
+ nfs4_session_limit_rwsize(server);
+
if (server->namelen == 0 || server->namelen > NFS4_MAXNAMLEN)
server->namelen = NFS4_MAXNAMLEN;
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Trond Myklebust <[email protected]>
commit bb6ad5572c0022e17e846b382d7413cdcf8055be upstream.
In call_xpt_users(), we delete the entry from the list, but we
do not reinitialise it. This triggers the list poisoning when
we later call unregister_xpt_user() in nfsd4_del_conns().
Signed-off-by: Trond Myklebust <[email protected]>
Cc: [email protected]
Signed-off-by: J. Bruce Fields <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/sunrpc/svc_xprt.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/net/sunrpc/svc_xprt.c
+++ b/net/sunrpc/svc_xprt.c
@@ -902,7 +902,7 @@ static void call_xpt_users(struct svc_xp
spin_lock(&xprt->xpt_lock);
while (!list_empty(&xprt->xpt_users)) {
u = list_first_entry(&xprt->xpt_users, struct svc_xpt_user, list);
- list_del(&u->list);
+ list_del_init(&u->list);
u->callback(u);
}
spin_unlock(&xprt->xpt_lock);
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: "Eric W. Biederman" <[email protected]>
[ Upstream commit 3597dfe01d12f570bc739da67f857fd222a3ea66 ]
Instead of playing whack-a-mole and changing SEND_SIG_PRIV to
SEND_SIG_FORCED throughout the kernel to ensure a pid namespace init
gets signals sent by the kernel, stop allowing a pid namespace init to
ignore SIGKILL or SIGSTOP sent by the kernel. A pid namespace init is
only supposed to be able to ignore signals sent from itself and
children with SIG_DFL.
Fixes: 921cf9f63089 ("signals: protect cinit from unblocked SIG_DFL signals")
Reviewed-by: Thomas Gleixner <[email protected]>
Signed-off-by: "Eric W. Biederman" <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
kernel/signal.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/kernel/signal.c
+++ b/kernel/signal.c
@@ -1042,7 +1042,7 @@ static int __send_signal(int sig, struct
result = TRACE_SIGNAL_IGNORED;
if (!prepare_signal(sig, t,
- from_ancestor_ns || (info == SEND_SIG_FORCED)))
+ from_ancestor_ns || (info == SEND_SIG_PRIV) || (info == SEND_SIG_FORCED)))
goto ret;
pending = group ? &t->signal->shared_pending : &t->pending;
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Amir Goldstein <[email protected]>
commit 93f38b6fae0ea8987e22d9e6c38f8dfdccd867ee upstream.
printk format used %*s instead of %.*s, so hostname_len does not limit
the number of bytes accessed from hostname.
Signed-off-by: Amir Goldstein <[email protected]>
Cc: [email protected]
Signed-off-by: J. Bruce Fields <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/lockd/host.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/fs/lockd/host.c
+++ b/fs/lockd/host.c
@@ -339,7 +339,7 @@ struct nlm_host *nlmsvc_lookup_host(cons
};
struct lockd_net *ln = net_generic(net, lockd_net_id);
- dprintk("lockd: %s(host='%*s', vers=%u, proto=%s)\n", __func__,
+ dprintk("lockd: %s(host='%.*s', vers=%u, proto=%s)\n", __func__,
(int)hostname_len, hostname, rqstp->rq_vers,
(rqstp->rq_prot == IPPROTO_UDP ? "udp" : "tcp"));
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Tang Junhui <[email protected]>
commit 2d6cb6edd2c7fb4f40998895bda45006281b1ac5 upstream.
refill->end record the last key of writeback, for example, at the first
time, keys (1,128K) to (1,1024K) are flush to the backend device, but
the end key (1,1024K) is not included, since the bellow code:
if (bkey_cmp(k, refill->end) >= 0) {
ret = MAP_DONE;
goto out;
}
And in the next time when we refill writeback keybuf again, we searched
key start from (1,1024K), and got a key bigger than it, so the key
(1,1024K) missed.
This patch modify the above code, and let the end key to be included to
the writeback key buffer.
Signed-off-by: Tang Junhui <[email protected]>
Cc: [email protected]
Signed-off-by: Coly Li <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/md/bcache/btree.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/md/bcache/btree.c
+++ b/drivers/md/bcache/btree.c
@@ -2372,7 +2372,7 @@ static int refill_keybuf_fn(struct btree
struct keybuf *buf = refill->buf;
int ret = MAP_CONTINUE;
- if (bkey_cmp(k, refill->end) >= 0) {
+ if (bkey_cmp(k, refill->end) > 0) {
ret = MAP_DONE;
goto out;
}
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Wenwen Wang <[email protected]>
commit 800a7340ab7dd667edf95e74d8e4f23a17e87076 upstream.
In copy_params(), the struct 'dm_ioctl' is first copied from the user
space buffer 'user' to 'param_kernel' and the field 'data_size' is
checked against 'minimum_data_size' (size of 'struct dm_ioctl' payload
up to its 'data' member). If the check fails, an error code EINVAL will be
returned. Otherwise, param_kernel->data_size is used to do a second copy,
which copies from the same user-space buffer to 'dmi'. After the second
copy, only 'dmi->data_size' is checked against 'param_kernel->data_size'.
Given that the buffer 'user' resides in the user space, a malicious
user-space process can race to change the content in the buffer between
the two copies. This way, the attacker can inject inconsistent data
into 'dmi' (versus previously validated 'param_kernel').
Fix redundant copying of 'minimum_data_size' from user-space buffer by
using the first copy stored in 'param_kernel'. Also remove the
'data_size' check after the second copy because it is now unnecessary.
Cc: [email protected]
Signed-off-by: Wenwen Wang <[email protected]>
Signed-off-by: Mike Snitzer <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/md/dm-ioctl.c | 18 ++++++------------
1 file changed, 6 insertions(+), 12 deletions(-)
--- a/drivers/md/dm-ioctl.c
+++ b/drivers/md/dm-ioctl.c
@@ -1681,8 +1681,7 @@ static void free_params(struct dm_ioctl
}
static int copy_params(struct dm_ioctl __user *user, struct dm_ioctl *param_kernel,
- int ioctl_flags,
- struct dm_ioctl **param, int *param_flags)
+ int ioctl_flags, struct dm_ioctl **param, int *param_flags)
{
struct dm_ioctl *dmi;
int secure_data;
@@ -1730,18 +1729,13 @@ static int copy_params(struct dm_ioctl _
return -ENOMEM;
}
- if (copy_from_user(dmi, user, param_kernel->data_size))
- goto bad;
+ /* Copy from param_kernel (which was already copied from user) */
+ memcpy(dmi, param_kernel, minimum_data_size);
-data_copied:
- /*
- * Abort if something changed the ioctl data while it was being copied.
- */
- if (dmi->data_size != param_kernel->data_size) {
- DMERR("rejecting ioctl: data size modified while processing parameters");
+ if (copy_from_user(&dmi->data, (char __user *)user + minimum_data_size,
+ param_kernel->data_size - minimum_data_size))
goto bad;
- }
-
+data_copied:
/* Wipe the user buffer so we do not return it to userspace */
if (secure_data && clear_user(user, param_kernel->data_size))
goto bad;
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: He Zhe <[email protected]>
commit 1bd54d851f50dea6af30c3e6ff4f3e9aab5558f9 upstream.
kgdboc_option_setup does not check input argument before passing it
to strlen. The argument would be a NULL pointer if "ekgdboc", without
its value, is set in command line and thus cause the following panic.
PANIC: early exception 0xe3 IP 10:ffffffff8fbbb620 error 0 cr2 0x0
[ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 4.18-rc8+ #1
[ 0.000000] RIP: 0010:strlen+0x0/0x20
...
[ 0.000000] Call Trace
[ 0.000000] ? kgdboc_option_setup+0x9/0xa0
[ 0.000000] ? kgdboc_early_init+0x6/0x1b
[ 0.000000] ? do_early_param+0x4d/0x82
[ 0.000000] ? parse_args+0x212/0x330
[ 0.000000] ? rdinit_setup+0x26/0x26
[ 0.000000] ? parse_early_options+0x20/0x23
[ 0.000000] ? rdinit_setup+0x26/0x26
[ 0.000000] ? parse_early_param+0x2d/0x39
[ 0.000000] ? setup_arch+0x2f7/0xbf4
[ 0.000000] ? start_kernel+0x5e/0x4c2
[ 0.000000] ? load_ucode_bsp+0x113/0x12f
[ 0.000000] ? secondary_startup_64+0xa5/0xb0
This patch adds a check to prevent the panic.
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Signed-off-by: He Zhe <[email protected]>
Reviewed-by: Daniel Thompson <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/tty/serial/kgdboc.c | 5 +++++
1 file changed, 5 insertions(+)
--- a/drivers/tty/serial/kgdboc.c
+++ b/drivers/tty/serial/kgdboc.c
@@ -133,6 +133,11 @@ static void kgdboc_unregister_kbd(void)
static int kgdboc_option_setup(char *opt)
{
+ if (!opt) {
+ pr_err("kgdboc: config string not provided\n");
+ return -EINVAL;
+ }
+
if (strlen(opt) >= MAX_CONFIG_LEN) {
printk(KERN_ERR "kgdboc: config string too long\n");
return -ENOSPC;
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Mauro Carvalho Chehab <[email protected]>
commit f823ce2a1202d47110a7ef86b65839f0be8adc38 upstream.
Follow the V4L2 spec, as warned by v4l2-compliance:
warn: v4l2-test-formats.cpp(732): TRY_FMT cannot handle an invalid pixelformat.
warn: v4l2-test-formats.cpp(733): This may or may not be a problem. For more information see:
warn: v4l2-test-formats.cpp(734): http://www.mail-archive.com/[email protected]/msg56550.html
Cc: [email protected]
Fixes: bddcf63313c6 ("V4L/DVB (9927): em28xx: use a more standard way to specify video formats")
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/media/usb/em28xx/em28xx-video.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
--- a/drivers/media/usb/em28xx/em28xx-video.c
+++ b/drivers/media/usb/em28xx/em28xx-video.c
@@ -1280,9 +1280,9 @@ static int vidioc_try_fmt_vid_cap(struct
fmt = format_by_fourcc(f->fmt.pix.pixelformat);
if (!fmt) {
- em28xx_videodbg("Fourcc format (%08x) invalid.\n",
- f->fmt.pix.pixelformat);
- return -EINVAL;
+ fmt = &format[0];
+ em28xx_videodbg("Fourcc format (%08x) invalid. Using default (%08x).\n",
+ f->fmt.pix.pixelformat, fmt->fourcc);
}
if (dev->board.is_em2800) {
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Serhey Popovych <[email protected]>
[ Upstream commit df52eab23d703142c766ac00bdb8db19d71238d0 ]
Configuring generic network device parameters on tun will fail in
presence of IFLA_INFO_KIND attribute in IFLA_LINKINFO nested attribute
since tun_validate() always return failure.
This can be visualized with following ip-link(8) command sequences:
# ip link set dev tun0 group 100
# ip link set dev tun0 group 100 type tun
RTNETLINK answers: Invalid argument
with contrast to dummy and veth drivers:
# ip link set dev dummy0 group 100
# ip link set dev dummy0 type dummy
# ip link set dev veth0 group 100
# ip link set dev veth0 group 100 type veth
Fix by returning zero in tun_validate() when @data is NULL that is
always in case since rtnl_link_ops->maxtype is zero in tun driver.
Fixes: f019a7a594d9 ("tun: Implement ip link del tunXXX")
Signed-off-by: Serhey Popovych <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/tun.c | 2 ++
1 file changed, 2 insertions(+)
--- a/drivers/net/tun.c
+++ b/drivers/net/tun.c
@@ -1423,6 +1423,8 @@ static void tun_setup(struct net_device
*/
static int tun_validate(struct nlattr *tb[], struct nlattr *data[])
{
+ if (!data)
+ return 0;
return -EINVAL;
}
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Yu Zhao <[email protected]>
[ Upstream commit 5169894982bb67486d93cc1e10151712bb86bcb6 ]
This device reports SDHCI_CLOCK_INT_STABLE even though it's not
ready to take SDHCI_CLOCK_CARD_EN. The symptom is that reading
SDHCI_CLOCK_CONTROL after enabling the clock shows absence of the
bit from the register (e.g. expecting 0x0000fa07 = 0x0000fa03 |
SDHCI_CLOCK_CARD_EN but only observed the first operand).
mmc1: Timeout waiting for hardware cmd interrupt.
mmc1: sdhci: ============ SDHCI REGISTER DUMP ===========
mmc1: sdhci: Sys addr: 0x00000000 | Version: 0x00000603
mmc1: sdhci: Blk size: 0x00000000 | Blk cnt: 0x00000000
mmc1: sdhci: Argument: 0x00000000 | Trn mode: 0x00000000
mmc1: sdhci: Present: 0x01ff0001 | Host ctl: 0x00000001
mmc1: sdhci: Power: 0x0000000f | Blk gap: 0x00000000
mmc1: sdhci: Wake-up: 0x00000000 | Clock: 0x0000fa03
mmc1: sdhci: Timeout: 0x00000000 | Int stat: 0x00000000
mmc1: sdhci: Int enab: 0x00ff0083 | Sig enab: 0x00ff0083
mmc1: sdhci: AC12 err: 0x00000000 | Slot int: 0x00000000
mmc1: sdhci: Caps: 0x25fcc8bf | Caps_1: 0x00002077
mmc1: sdhci: Cmd: 0x00000000 | Max curr: 0x005800c8
mmc1: sdhci: Resp[0]: 0x00000000 | Resp[1]: 0x00000000
mmc1: sdhci: Resp[2]: 0x00000000 | Resp[3]: 0x00000000
mmc1: sdhci: Host ctl2: 0x00000008
mmc1: sdhci: ADMA Err: 0x00000000 | ADMA Ptr: 0x00000000
mmc1: sdhci: ============================================
The problem happens during wakeup from S3. Adding a delay quirk
after power up reliably fixes the problem.
Signed-off-by: Yu Zhao <[email protected]>
Signed-off-by: Ulf Hansson <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/mmc/host/sdhci-pci-o2micro.c | 3 +++
1 file changed, 3 insertions(+)
--- a/drivers/mmc/host/sdhci-pci-o2micro.c
+++ b/drivers/mmc/host/sdhci-pci-o2micro.c
@@ -336,6 +336,9 @@ int sdhci_pci_o2_probe(struct sdhci_pci_
pci_write_config_byte(chip->pdev, O2_SD_LOCK_WP, scratch);
break;
case PCI_DEVICE_ID_O2_SEABIRD0:
+ if (chip->pdev->revision == 0x01)
+ chip->quirks |= SDHCI_QUIRK_DELAY_AFTER_POWER;
+ /* fall through */
case PCI_DEVICE_ID_O2_SEABIRD1:
/* UnLock WP */
ret = pci_read_config_byte(chip->pdev,
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Masami Hiramatsu <[email protected]>
[ Upstream commit 819319fc93461c07b9cdb3064f154bd8cfd48172 ]
Make reuse_unused_kprobe() to return error code if
it fails to reuse unused kprobe for optprobe instead
of calling BUG_ON().
Signed-off-by: Masami Hiramatsu <[email protected]>
Cc: Anil S Keshavamurthy <[email protected]>
Cc: David S . Miller <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Naveen N . Rao <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Link: http://lkml.kernel.org/r/153666124040.21306.14150398706331307654.stgit@devbox
Signed-off-by: Ingo Molnar <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
kernel/kprobes.c | 27 ++++++++++++++++++++-------
1 file changed, 20 insertions(+), 7 deletions(-)
--- a/kernel/kprobes.c
+++ b/kernel/kprobes.c
@@ -665,9 +665,10 @@ static void unoptimize_kprobe(struct kpr
}
/* Cancel unoptimizing for reusing */
-static void reuse_unused_kprobe(struct kprobe *ap)
+static int reuse_unused_kprobe(struct kprobe *ap)
{
struct optimized_kprobe *op;
+ int ret;
BUG_ON(!kprobe_unused(ap));
/*
@@ -681,8 +682,12 @@ static void reuse_unused_kprobe(struct k
/* Enable the probe again */
ap->flags &= ~KPROBE_FLAG_DISABLED;
/* Optimize it again (remove from op->list) */
- BUG_ON(!kprobe_optready(ap));
+ ret = kprobe_optready(ap);
+ if (ret)
+ return ret;
+
optimize_kprobe(ap);
+ return 0;
}
/* Remove optimized instructions */
@@ -893,11 +898,16 @@ static void __disarm_kprobe(struct kprob
#define kprobe_disarmed(p) kprobe_disabled(p)
#define wait_for_kprobe_optimizer() do {} while (0)
-/* There should be no unused kprobes can be reused without optimization */
-static void reuse_unused_kprobe(struct kprobe *ap)
+static int reuse_unused_kprobe(struct kprobe *ap)
{
+ /*
+ * If the optimized kprobe is NOT supported, the aggr kprobe is
+ * released at the same time that the last aggregated kprobe is
+ * unregistered.
+ * Thus there should be no chance to reuse unused kprobe.
+ */
printk(KERN_ERR "Error: There should be no unused kprobe here.\n");
- BUG_ON(kprobe_unused(ap));
+ return -EINVAL;
}
static void free_aggr_kprobe(struct kprobe *p)
@@ -1275,9 +1285,12 @@ static int register_aggr_kprobe(struct k
goto out;
}
init_aggr_kprobe(ap, orig_p);
- } else if (kprobe_unused(ap))
+ } else if (kprobe_unused(ap)) {
/* This probe is going to die. Rescue it */
- reuse_unused_kprobe(ap);
+ ret = reuse_unused_kprobe(ap);
+ if (ret)
+ goto out;
+ }
if (kprobe_gone(ap)) {
/*
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Daniel Axtens <[email protected]>
[ Upstream commit f5e284803a7206d43e26f9ffcae5de9626d95e37 ]
When enumerating page size definitions to check hardware support,
we construct a constant which is (1U << (def->shift - 10)).
However, the array of page size definitions is only initalised for
various MMU_PAGE_* constants, so it contains a number of 0-initialised
elements with def->shift == 0. This means we end up shifting by a
very large number, which gives the following UBSan splat:
================================================================================
UBSAN: Undefined behaviour in /home/dja/dev/linux/linux/arch/powerpc/mm/tlb_nohash.c:506:21
shift exponent 4294967286 is too large for 32-bit type 'unsigned int'
CPU: 0 PID: 0 Comm: swapper Not tainted 4.19.0-rc3-00045-ga604f927b012-dirty #6
Call Trace:
[c00000000101bc20] [c000000000a13d54] .dump_stack+0xa8/0xec (unreliable)
[c00000000101bcb0] [c0000000004f20a8] .ubsan_epilogue+0x18/0x64
[c00000000101bd30] [c0000000004f2b10] .__ubsan_handle_shift_out_of_bounds+0x110/0x1a4
[c00000000101be20] [c000000000d21760] .early_init_mmu+0x1b4/0x5a0
[c00000000101bf10] [c000000000d1ba28] .early_setup+0x100/0x130
[c00000000101bf90] [c000000000000528] start_here_multiplatform+0x68/0x80
================================================================================
Fix this by first checking if the element exists (shift != 0) before
constructing the constant.
Signed-off-by: Daniel Axtens <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/powerpc/mm/tlb_nohash.c | 3 +++
1 file changed, 3 insertions(+)
--- a/arch/powerpc/mm/tlb_nohash.c
+++ b/arch/powerpc/mm/tlb_nohash.c
@@ -479,6 +479,9 @@ static void setup_page_sizes(void)
for (psize = 0; psize < MMU_PAGE_COUNT; ++psize) {
struct mmu_psize_def *def = &mmu_psize_defs[psize];
+ if (!def->shift)
+ continue;
+
if (tlb1ps & (1U << (def->shift - 10))) {
def->flags |= MMU_PAGE_SIZE_DIRECT;
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Tomi Valkeinen <[email protected]>
[ Upstream commit 538f66ba204944470a653a4cccc5f8befdf97c22 ]
A DMM timeout "timed out waiting for done" has been observed on DRA7
devices. The timeout happens rarely, and only when the system is under
heavy load.
Debugging showed that the timeout can be made to happen much more
frequently by optimizing the DMM driver, so that there's almost no code
between writing the last DMM descriptors to RAM, and writing to DMM
register which starts the DMM transaction.
The current theory is that a wmb() does not properly ensure that the
data written to RAM is observable by all the components in the system.
This DMM timeout has caused interesting (and rare) bugs as the error
handling was not functioning properly (the error handling has been fixed
in previous commits):
* If a DMM timeout happened when a GEM buffer was being pinned for
display on the screen, a timeout error would be shown, but the driver
would continue programming DSS HW with broken buffer, leading to
SYNCLOST floods and possible crashes.
* If a DMM timeout happened when other user (say, video decoder) was
pinning a GEM buffer, a timeout would be shown but if the user
handled the error properly, no other issues followed.
* If a DMM timeout happened when a GEM buffer was being released, the
driver does not even notice the error, leading to crashes or hang
later.
This patch adds wmb() and readl() calls after the last bit is written to
RAM, which should ensure that the execution proceeds only after the data
is actually in RAM, and thus observable by DMM.
The read-back should not be needed. Further study is required to understand
if DMM is somehow special case and read-back is ok, or if DRA7's memory
barriers do not work correctly.
Signed-off-by: Tomi Valkeinen <[email protected]>
Signed-off-by: Peter Ujfalusi <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpu/drm/omapdrm/omap_dmm_tiler.c | 11 +++++++++++
1 file changed, 11 insertions(+)
--- a/drivers/gpu/drm/omapdrm/omap_dmm_tiler.c
+++ b/drivers/gpu/drm/omapdrm/omap_dmm_tiler.c
@@ -256,6 +256,17 @@ static int dmm_txn_commit(struct dmm_txn
}
txn->last_pat->next_pa = 0;
+ /* ensure that the written descriptors are visible to DMM */
+ wmb();
+
+ /*
+ * NOTE: the wmb() above should be enough, but there seems to be a bug
+ * in OMAP's memory barrier implementation, which in some rare cases may
+ * cause the writes not to be observable after wmb().
+ */
+
+ /* read back to ensure the data is in RAM */
+ readl(&txn->last_pat->next_pa);
/* write to PAT_DESCR to clear out any pending transaction */
writel(0x0, dmm->base + reg[PAT_DESCR][engine->id]);
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Nicolas Pitre <[email protected]>
commit 672ca9dd13f1aca0c17516f76fc5b0e8344b3e46 upstream.
It is possible for corrupted filesystem images to produce very large
block offsets that may wrap when a length is added, and wrongly pass
the buffer size test.
Reported-by: Anatoly Trosinenko <[email protected]>
Signed-off-by: Nicolas Pitre <[email protected]>
Cc: [email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/cramfs/inode.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/fs/cramfs/inode.c
+++ b/fs/cramfs/inode.c
@@ -185,7 +185,8 @@ static void *cramfs_read(struct super_bl
continue;
blk_offset = (blocknr - buffer_blocknr[i]) << PAGE_CACHE_SHIFT;
blk_offset += offset;
- if (blk_offset + len > BUFFER_SIZE)
+ if (blk_offset > BUFFER_SIZE ||
+ blk_offset + len > BUFFER_SIZE)
continue;
return read_buffers[i] + blk_offset;
}
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Dengcheng Zhu <[email protected]>
[ Upstream commit dc57aaf95a516f70e2d527d8287a0332c481a226 ]
After changing CPU online status, it will not be sent any IPIs such as in
__flush_cache_all() on software coherency systems. Do this before disabling
local IRQ.
Signed-off-by: Dengcheng Zhu <[email protected]>
Signed-off-by: Paul Burton <[email protected]>
Patchwork: https://patchwork.linux-mips.org/patch/20571/
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/mips/kernel/crash.c | 3 +++
arch/mips/kernel/machine_kexec.c | 3 +++
2 files changed, 6 insertions(+)
--- a/arch/mips/kernel/crash.c
+++ b/arch/mips/kernel/crash.c
@@ -34,6 +34,9 @@ static void crash_shutdown_secondary(voi
if (!cpu_online(cpu))
return;
+ /* We won't be sent IPIs any more. */
+ set_cpu_online(cpu, false);
+
local_irq_disable();
if (!cpu_isset(cpu, cpus_in_crash))
crash_save_cpu(regs, cpu);
--- a/arch/mips/kernel/machine_kexec.c
+++ b/arch/mips/kernel/machine_kexec.c
@@ -95,6 +95,9 @@ machine_kexec(struct kimage *image)
*ptr = (unsigned long) phys_to_virt(*ptr);
}
+ /* Mark offline BEFORE disabling local irq. */
+ set_cpu_online(smp_processor_id(), false);
+
/*
* we do not want to be bothered.
*/
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Dominique Martinet <[email protected]>
[ Upstream commit 62e3941776fea8678bb8120607039410b1b61a65 ]
p9stat_free is more of a cleanup function than a 'free' function as it
only frees the content of the struct; there are chances of use-after-free
if it is improperly used (e.g. p9stat_free called twice as it used to be
possible to)
Clearing dangling pointers makes the function idempotent and safer to use.
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Dominique Martinet <[email protected]>
Reported-by: [email protected]
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/9p/protocol.c | 5 +++++
1 file changed, 5 insertions(+)
--- a/net/9p/protocol.c
+++ b/net/9p/protocol.c
@@ -45,10 +45,15 @@ p9pdu_writef(struct p9_fcall *pdu, int p
void p9stat_free(struct p9_wstat *stbuf)
{
kfree(stbuf->name);
+ stbuf->name = NULL;
kfree(stbuf->uid);
+ stbuf->uid = NULL;
kfree(stbuf->gid);
+ stbuf->gid = NULL;
kfree(stbuf->muid);
+ stbuf->muid = NULL;
kfree(stbuf->extension);
+ stbuf->extension = NULL;
}
EXPORT_SYMBOL(p9stat_free);
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jan Kara <[email protected]>
commit ccd3c4373eacb044eb3832966299d13d2631f66f upstream.
The code cleaning transaction's lists of checkpoint buffers has a bug
where it increases bh refcount only after releasing
journal->j_list_lock. Thus the following race is possible:
CPU0 CPU1
jbd2_log_do_checkpoint()
jbd2_journal_try_to_free_buffers()
__journal_try_to_free_buffer(bh)
...
while (transaction->t_checkpoint_io_list)
...
if (buffer_locked(bh)) {
<-- IO completes now, buffer gets unlocked -->
spin_unlock(&journal->j_list_lock);
spin_lock(&journal->j_list_lock);
__jbd2_journal_remove_checkpoint(jh);
spin_unlock(&journal->j_list_lock);
try_to_free_buffers(page);
get_bh(bh) <-- accesses freed bh
Fix the problem by grabbing bh reference before unlocking
journal->j_list_lock.
Fixes: dc6e8d669cf5 ("jbd2: don't call get_bh() before calling __jbd2_journal_remove_checkpoint()")
Fixes: be1158cc615f ("jbd2: fold __process_buffer() into jbd2_log_do_checkpoint()")
Reported-by: [email protected]
CC: [email protected]
Reviewed-by: Lukas Czerner <[email protected]>
Signed-off-by: Jan Kara <[email protected]>
Signed-off-by: Theodore Ts'o <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/jbd2/checkpoint.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/fs/jbd2/checkpoint.c
+++ b/fs/jbd2/checkpoint.c
@@ -254,8 +254,8 @@ restart:
bh = jh2bh(jh);
if (buffer_locked(bh)) {
- spin_unlock(&journal->j_list_lock);
get_bh(bh);
+ spin_unlock(&journal->j_list_lock);
wait_on_buffer(bh);
/* the journal_head may have gone by now */
BUFFER_TRACE(bh, "brelse");
@@ -336,8 +336,8 @@ restart2:
jh = transaction->t_checkpoint_io_list;
bh = jh2bh(jh);
if (buffer_locked(bh)) {
- spin_unlock(&journal->j_list_lock);
get_bh(bh);
+ spin_unlock(&journal->j_list_lock);
wait_on_buffer(bh);
/* the journal_head may have gone by now */
BUFFER_TRACE(bh, "brelse");
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: He Zhe <[email protected]>
commit ccde460b9ae5c2bd5e4742af0a7f623c2daad566 upstream.
memory_corruption_check[{_period|_size}]()'s handlers do not check input
argument before passing it to kstrtoul() or simple_strtoull(). The argument
would be a NULL pointer if each of the kernel parameters, without its
value, is set in command line and thus cause the following panic.
PANIC: early exception 0xe3 IP 10:ffffffff73587c22 error 0 cr2 0x0
[ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 4.18-rc8+ #2
[ 0.000000] RIP: 0010:kstrtoull+0x2/0x10
...
[ 0.000000] Call Trace
[ 0.000000] ? set_corruption_check+0x21/0x49
[ 0.000000] ? do_early_param+0x4d/0x82
[ 0.000000] ? parse_args+0x212/0x330
[ 0.000000] ? rdinit_setup+0x26/0x26
[ 0.000000] ? parse_early_options+0x20/0x23
[ 0.000000] ? rdinit_setup+0x26/0x26
[ 0.000000] ? parse_early_param+0x2d/0x39
[ 0.000000] ? setup_arch+0x2f7/0xbf4
[ 0.000000] ? start_kernel+0x5e/0x4c2
[ 0.000000] ? load_ucode_bsp+0x113/0x12f
[ 0.000000] ? secondary_startup_64+0xa5/0xb0
This patch adds checks to prevent the panic.
Signed-off-by: He Zhe <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Ingo Molnar <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/kernel/check.c | 15 +++++++++++++++
1 file changed, 15 insertions(+)
--- a/arch/x86/kernel/check.c
+++ b/arch/x86/kernel/check.c
@@ -30,6 +30,11 @@ static __init int set_corruption_check(c
ssize_t ret;
unsigned long val;
+ if (!arg) {
+ pr_err("memory_corruption_check config string not provided\n");
+ return -EINVAL;
+ }
+
ret = kstrtoul(arg, 10, &val);
if (ret)
return ret;
@@ -44,6 +49,11 @@ static __init int set_corruption_check_p
ssize_t ret;
unsigned long val;
+ if (!arg) {
+ pr_err("memory_corruption_check_period config string not provided\n");
+ return -EINVAL;
+ }
+
ret = kstrtoul(arg, 10, &val);
if (ret)
return ret;
@@ -58,6 +68,11 @@ static __init int set_corruption_check_s
char *end;
unsigned size;
+ if (!arg) {
+ pr_err("memory_corruption_check_size config string not provided\n");
+ return -EINVAL;
+ }
+
size = memparse(arg, &end);
if (*end == '\0')
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Ilya Dryomov <[email protected]>
commit 94e6992bb560be8bffb47f287194adf070b57695 upstream.
If the read is large enough, we end up spinning in the messenger:
libceph: osd0 192.168.122.1:6801 io error
libceph: osd0 192.168.122.1:6801 io error
libceph: osd0 192.168.122.1:6801 io error
This is a receive side limit, so only reads were affected.
Cc: [email protected]
Signed-off-by: Ilya Dryomov <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
include/linux/ceph/libceph.h | 8 +++++++-
1 file changed, 7 insertions(+), 1 deletion(-)
--- a/include/linux/ceph/libceph.h
+++ b/include/linux/ceph/libceph.h
@@ -67,7 +67,13 @@ struct ceph_options {
#define CEPH_MSG_MAX_FRONT_LEN (16*1024*1024)
#define CEPH_MSG_MAX_MIDDLE_LEN (16*1024*1024)
-#define CEPH_MSG_MAX_DATA_LEN (16*1024*1024)
+
+/*
+ * Handle the largest possible rbd object in one message.
+ * There is no limit on the size of cephfs objects, but it has to obey
+ * rsize and wsize mount options anyway.
+ */
+#define CEPH_MSG_MAX_DATA_LEN (32*1024*1024)
#define CEPH_AUTH_NAME_DEFAULT "guest"
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Lukas Czerner <[email protected]>
commit 625ef8a3acd111d5f496d190baf99d1a815bd03e upstream.
Variable retries is not initialized in ext4_da_write_inline_data_begin()
which can lead to nondeterministic number of retries in case we hit
ENOSPC. Initialize retries to zero as we do everywhere else.
Signed-off-by: Lukas Czerner <[email protected]>
Signed-off-by: Theodore Ts'o <[email protected]>
Fixes: bc0ca9df3b2a ("ext4: retry allocation when inline->extent conversion failed")
Cc: [email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/ext4/inline.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/fs/ext4/inline.c
+++ b/fs/ext4/inline.c
@@ -850,7 +850,7 @@ int ext4_da_write_inline_data_begin(stru
handle_t *handle;
struct page *page;
struct ext4_iloc iloc;
- int retries;
+ int retries = 0;
ret = ext4_get_inode_loc(inode, &iloc);
if (ret)
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Arnd Bergmann <[email protected]>
commit 6a32c2469c3fbfee8f25bcd20af647326650a6cf upstream.
Building any configuration with 'make W=1' produces a warning:
kernel/bounds.c:16:6: warning: no previous prototype for 'foo' [-Wmissing-prototypes]
When also passing -Werror, this prevents us from building any other files.
Nobody ever calls the function, but we can't make it 'static' either
since we want the compiler output.
Calling it 'main' instead however avoids the warning, because gcc
does not insist on having a declaration for main.
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnd Bergmann <[email protected]>
Reported-by: Kieran Bingham <[email protected]>
Reviewed-by: Kieran Bingham <[email protected]>
Cc: David Laight <[email protected]>
Cc: Masahiro Yamada <[email protected]>
Cc: Greg Kroah-Hartman <[email protected]>
Cc: <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
kernel/bounds.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
--- a/kernel/bounds.c
+++ b/kernel/bounds.c
@@ -12,7 +12,7 @@
#include <linux/log2.h>
#include <linux/spinlock_types.h>
-void foo(void)
+int main(void)
{
/* The enum constants to put into include/generated/bounds.h */
DEFINE(NR_PAGEFLAGS, __NR_PAGEFLAGS);
@@ -22,4 +22,6 @@ void foo(void)
#endif
DEFINE(SPINLOCK_SIZE, sizeof(spinlock_t));
/* End of constants */
+
+ return 0;
}
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Eric W. Biederman <[email protected]>
commit 0ab93e9c99f8208c0a1a7b7170c827936268c996 upstream.
The genweq_add_file and genwqe_del_file by caching current without
using reference counting embed the assumption that a file descriptor
will never be passed from one process to another. It even embeds the
assumption that the the thread that opened the file will be in
existence when the process terminates. Neither of which are
guaranteed to be true.
Therefore replace caching the task_struct of the opener with
pid of the openers thread group id. All the knowledge of the
opener is used for is as the target of SIGKILL and a SIGKILL
will kill the entire process group.
Rename genwqe_force_sig to genwqe_terminate, remove it's unncessary
signal argument, update it's ownly caller, and use kill_pid
instead of force_sig.
The work force_sig does in changing signal handling state is not
relevant to SIGKILL sent as SEND_SIG_PRIV. The exact same processess
will be killed just with less work, and less confusion. The work done
by force_sig is really only needed for handling syncrhonous
exceptions.
It will still be possible to cause genwqe_device_remove to wait
8 seconds by passing a file descriptor to another process but
the possible user after free is fixed.
Fixes: eaf4722d4645 ("GenWQE Character device and DDCB queue")
Cc: [email protected]
Cc: Greg Kroah-Hartman <[email protected]>
Cc: Frank Haverkamp <[email protected]>
Cc: Joerg-Stephan Vogt <[email protected]>
Cc: Michael Jung <[email protected]>
Cc: Michael Ruettger <[email protected]>
Cc: Kleber Sacilotto de Souza <[email protected]>
Cc: Sebastian Ott <[email protected]>
Cc: Eberhard S. Amann <[email protected]>
Cc: Gabriel Krisman Bertazi <[email protected]>
Cc: Guilherme G. Piccoli <[email protected]>
Signed-off-by: "Eric W. Biederman" <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/misc/genwqe/card_base.h | 2 +-
drivers/misc/genwqe/card_dev.c | 9 +++++----
2 files changed, 6 insertions(+), 5 deletions(-)
--- a/drivers/misc/genwqe/card_base.h
+++ b/drivers/misc/genwqe/card_base.h
@@ -405,7 +405,7 @@ struct genwqe_file {
struct file *filp;
struct fasync_struct *async_queue;
- struct task_struct *owner;
+ struct pid *opener;
struct list_head list; /* entry in list of open files */
spinlock_t map_lock; /* lock for dma_mappings */
--- a/drivers/misc/genwqe/card_dev.c
+++ b/drivers/misc/genwqe/card_dev.c
@@ -52,7 +52,7 @@ static void genwqe_add_file(struct genwq
{
unsigned long flags;
- cfile->owner = current;
+ cfile->opener = get_pid(task_tgid(current));
spin_lock_irqsave(&cd->file_lock, flags);
list_add(&cfile->list, &cd->file_list);
spin_unlock_irqrestore(&cd->file_lock, flags);
@@ -65,6 +65,7 @@ static int genwqe_del_file(struct genwqe
spin_lock_irqsave(&cd->file_lock, flags);
list_del(&cfile->list);
spin_unlock_irqrestore(&cd->file_lock, flags);
+ put_pid(cfile->opener);
return 0;
}
@@ -275,7 +276,7 @@ static int genwqe_kill_fasync(struct gen
return files;
}
-static int genwqe_force_sig(struct genwqe_dev *cd, int sig)
+static int genwqe_terminate(struct genwqe_dev *cd)
{
unsigned int files = 0;
unsigned long flags;
@@ -283,7 +284,7 @@ static int genwqe_force_sig(struct genwq
spin_lock_irqsave(&cd->file_lock, flags);
list_for_each_entry(cfile, &cd->file_list, list) {
- force_sig(sig, cfile->owner);
+ kill_pid(cfile->opener, SIGKILL, 1);
files++;
}
spin_unlock_irqrestore(&cd->file_lock, flags);
@@ -1356,7 +1357,7 @@ static int genwqe_inform_and_stop_proces
dev_warn(&pci_dev->dev,
"[%s] send SIGKILL and wait ...\n", __func__);
- rc = genwqe_force_sig(cd, SIGKILL); /* force terminate */
+ rc = genwqe_terminate(cd);
if (rc) {
/* Give kill_timout more seconds to end processes */
for (i = 0; (i < genwqe_kill_timeout) &&
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Eugen Hristev <[email protected]>
commit aea835f2dc8a682942b859179c49ad1841a6c8b9 upstream.
When channels are registered, the hardware channel number is not the
actual iio channel number.
This is because the driver is probed with a certain number of accessible
channels. Some pins are routed and some not, depending on the description of
the board in the DT.
Because of that, channels 0,1,2,3 can correspond to hardware channels
2,3,4,5 for example.
In the buffered triggered case, we need to do the translation accordingly.
Fixed the channel number to stop reading the wrong channel.
Fixes: 0e589d5fb ("ARM: AT91: IIO: Add AT91 ADC driver.")
Cc: Maxime Ripard <[email protected]>
Signed-off-by: Eugen Hristev <[email protected]>
Acked-by: Ludovic Desroches <[email protected]>
Cc: <[email protected]>
Signed-off-by: Jonathan Cameron <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/iio/adc/at91_adc.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
--- a/drivers/iio/adc/at91_adc.c
+++ b/drivers/iio/adc/at91_adc.c
@@ -245,12 +245,14 @@ static irqreturn_t at91_adc_trigger_hand
struct iio_poll_func *pf = p;
struct iio_dev *idev = pf->indio_dev;
struct at91_adc_state *st = iio_priv(idev);
+ struct iio_chan_spec const *chan;
int i, j = 0;
for (i = 0; i < idev->masklength; i++) {
if (!test_bit(i, idev->active_scan_mask))
continue;
- st->buffer[j] = at91_adc_readl(st, AT91_ADC_CHAN(st, i));
+ chan = idev->channels + i;
+ st->buffer[j] = at91_adc_readl(st, AT91_ADC_CHAN(st, chan->channel));
j++;
}
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Steve French <[email protected]>
commit 926674de6705f0f1dbf29a62fd758d0977f535d6 upstream.
Some servers (e.g. Azure) do not include a spnego blob in the SMB3
negotiate protocol response, so on kerberos mounts ("sec=krb5")
we can fail, as we expected the server to list its supported
auth types (OIDs in the spnego blob in the negprot response).
Change this so that on krb5 mounts we default to trying krb5 if the
server doesn't list its supported protocol mechanisms.
Signed-off-by: Steve French <[email protected]>
Reviewed-by: Ronnie Sahlberg <[email protected]>
CC: Stable <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/cifs/cifs_spnego.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
--- a/fs/cifs/cifs_spnego.c
+++ b/fs/cifs/cifs_spnego.c
@@ -147,8 +147,10 @@ cifs_get_spnego_key(struct cifs_ses *ses
sprintf(dp, ";sec=krb5");
else if (server->sec_mskerberos)
sprintf(dp, ";sec=mskrb5");
- else
- goto out;
+ else {
+ cifs_dbg(VFS, "unknown or missing server auth type, use krb5\n");
+ sprintf(dp, ";sec=krb5");
+ }
dp = description + strlen(description);
sprintf(dp, ";uid=0x%x",
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Eric Biggers <[email protected]>
commit 1e4c8dafbb6bf72fb5eca035b861e39c5896c2b7 upstream.
The 12 character temporary buffer is not necessarily long enough to hold
a 'long' value. Increase it.
Signed-off-by: Eric Biggers <[email protected]>
Cc: [email protected]
Signed-off-by: Mimi Zohar <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
security/integrity/ima/ima_fs.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
--- a/security/integrity/ima/ima_fs.c
+++ b/security/integrity/ima/ima_fs.c
@@ -26,14 +26,14 @@
#include "ima.h"
static int valid_policy = 1;
-#define TMPBUFLEN 12
+
static ssize_t ima_show_htable_value(char __user *buf, size_t count,
loff_t *ppos, atomic_long_t *val)
{
- char tmpbuf[TMPBUFLEN];
+ char tmpbuf[32]; /* greater than largest 'long' string value */
ssize_t len;
- len = scnprintf(tmpbuf, TMPBUFLEN, "%li\n", atomic_long_read(val));
+ len = scnprintf(tmpbuf, sizeof(tmpbuf), "%li\n", atomic_long_read(val));
return simple_read_from_buffer(buf, count, ppos, tmpbuf, len);
}
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Alexandre Belloni <[email protected]>
[ Upstream commit ae61cf5b9913027c6953a79ed3894da4f47061bd ]
When both uio and the uio drivers are built in the kernel, it is possible
for a driver to register devices before the uio class is registered.
This may result in a NULL pointer dereference later on in
get_device_parent() when accessing the class glue_dirs spinlock.
The trace looks like that:
Unable to handle kernel NULL pointer dereference at virtual address 00000140
[...]
[<ffff0000089cc234>] _raw_spin_lock+0x14/0x48
[<ffff0000084f56bc>] device_add+0x154/0x6a0
[<ffff0000084f5e48>] device_create_groups_vargs+0x120/0x128
[<ffff0000084f5edc>] device_create+0x54/0x60
[<ffff0000086e72c0>] __uio_register_device+0x120/0x4a8
[<ffff000008528b7c>] jaguar2_pci_probe+0x2d4/0x558
[<ffff0000083fc18c>] local_pci_probe+0x3c/0xb8
[<ffff0000083fd81c>] pci_device_probe+0x11c/0x180
[<ffff0000084f88bc>] driver_probe_device+0x22c/0x2d8
[<ffff0000084f8a24>] __driver_attach+0xbc/0xc0
[<ffff0000084f69fc>] bus_for_each_dev+0x4c/0x98
[<ffff0000084f81b8>] driver_attach+0x20/0x28
[<ffff0000084f7d08>] bus_add_driver+0x1b8/0x228
[<ffff0000084f93c0>] driver_register+0x60/0xf8
[<ffff0000083fb918>] __pci_register_driver+0x40/0x48
Return EPROBE_DEFER in that case so the driver can register the device
later.
Signed-off-by: Alexandre Belloni <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/uio/uio.c | 9 +++++++++
1 file changed, 9 insertions(+)
--- a/drivers/uio/uio.c
+++ b/drivers/uio/uio.c
@@ -249,6 +249,8 @@ static struct class uio_class = {
.dev_groups = uio_groups,
};
+bool uio_class_registered;
+
/*
* device functions
*/
@@ -771,6 +773,9 @@ static int init_uio_class(void)
printk(KERN_ERR "class_register failed for uio\n");
goto err_class_register;
}
+
+ uio_class_registered = true;
+
return 0;
err_class_register:
@@ -781,6 +786,7 @@ exit:
static void release_uio_class(void)
{
+ uio_class_registered = false;
class_unregister(&uio_class);
uio_major_cleanup();
}
@@ -800,6 +806,9 @@ int __uio_register_device(struct module
struct uio_device *idev;
int ret = 0;
+ if (!uio_class_registered)
+ return -EPROBE_DEFER;
+
if (!parent || !info || !info->name || !info->version)
return -EINVAL;
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Mikulas Patocka <[email protected]>
commit c09bcc91bb94ed91f1391bffcbe294963d605732 upstream.
Reading the registers without waiting for engine idle returns
unpredictable values. These unpredictable values result in display
corruption - if atyfb_imageblit reads the content of DP_PIX_WIDTH with the
bit DP_HOST_TRIPLE_EN set (from previous invocation), the driver would
never ever clear the bit, resulting in display corruption.
We don't want to wait for idle because it would degrade performance, so
this patch modifies the driver so that it never reads accelerator
registers.
HOST_CNTL doesn't have to be read, we can just write it with
HOST_BYTE_ALIGN because no other part of the driver cares if
HOST_BYTE_ALIGN is set.
DP_PIX_WIDTH is written in the functions atyfb_copyarea and atyfb_fillrect
with the default value and in atyfb_imageblit with the value set according
to the source image data.
Signed-off-by: Mikulas Patocka <[email protected]>
Reviewed-by: Ville Syrjälä <[email protected]>
Cc: [email protected]
Signed-off-by: Bartlomiej Zolnierkiewicz <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/video/fbdev/aty/mach64_accel.c | 22 +++++++++-------------
1 file changed, 9 insertions(+), 13 deletions(-)
--- a/drivers/video/fbdev/aty/mach64_accel.c
+++ b/drivers/video/fbdev/aty/mach64_accel.c
@@ -126,7 +126,7 @@ void aty_init_engine(struct atyfb_par *p
/* set host attributes */
wait_for_fifo(13, par);
- aty_st_le32(HOST_CNTL, 0, par);
+ aty_st_le32(HOST_CNTL, HOST_BYTE_ALIGN, par);
/* set pattern attributes */
aty_st_le32(PAT_REG0, 0, par);
@@ -232,7 +232,8 @@ void atyfb_copyarea(struct fb_info *info
rotation = rotation24bpp(dx, direction);
}
- wait_for_fifo(4, par);
+ wait_for_fifo(5, par);
+ aty_st_le32(DP_PIX_WIDTH, par->crtc.dp_pix_width, par);
aty_st_le32(DP_SRC, FRGD_SRC_BLIT, par);
aty_st_le32(SRC_Y_X, (sx << 16) | sy, par);
aty_st_le32(SRC_HEIGHT1_WIDTH1, (width << 16) | area->height, par);
@@ -268,7 +269,8 @@ void atyfb_fillrect(struct fb_info *info
rotation = rotation24bpp(dx, DST_X_LEFT_TO_RIGHT);
}
- wait_for_fifo(3, par);
+ wait_for_fifo(4, par);
+ aty_st_le32(DP_PIX_WIDTH, par->crtc.dp_pix_width, par);
aty_st_le32(DP_FRGD_CLR, color, par);
aty_st_le32(DP_SRC,
BKGD_SRC_BKGD_CLR | FRGD_SRC_FRGD_CLR | MONO_SRC_ONE,
@@ -283,7 +285,7 @@ void atyfb_imageblit(struct fb_info *inf
{
struct atyfb_par *par = (struct atyfb_par *) info->par;
u32 src_bytes, dx = image->dx, dy = image->dy, width = image->width;
- u32 pix_width_save, pix_width, host_cntl, rotation = 0, src, mix;
+ u32 pix_width, rotation = 0, src, mix;
if (par->asleep)
return;
@@ -295,8 +297,7 @@ void atyfb_imageblit(struct fb_info *inf
return;
}
- pix_width = pix_width_save = aty_ld_le32(DP_PIX_WIDTH, par);
- host_cntl = aty_ld_le32(HOST_CNTL, par) | HOST_BYTE_ALIGN;
+ pix_width = par->crtc.dp_pix_width;
switch (image->depth) {
case 1:
@@ -369,12 +370,11 @@ void atyfb_imageblit(struct fb_info *inf
mix = FRGD_MIX_D_XOR_S | BKGD_MIX_D;
}
- wait_for_fifo(6, par);
- aty_st_le32(DP_WRITE_MASK, 0xFFFFFFFF, par);
+ wait_for_fifo(5, par);
aty_st_le32(DP_PIX_WIDTH, pix_width, par);
aty_st_le32(DP_MIX, mix, par);
aty_st_le32(DP_SRC, src, par);
- aty_st_le32(HOST_CNTL, host_cntl, par);
+ aty_st_le32(HOST_CNTL, HOST_BYTE_ALIGN, par);
aty_st_le32(DST_CNTL, DST_Y_TOP_TO_BOTTOM | DST_X_LEFT_TO_RIGHT | rotation, par);
draw_rect(dx, dy, width, image->height, par);
@@ -423,8 +423,4 @@ void atyfb_imageblit(struct fb_info *inf
aty_st_le32(HOST_DATA0, get_unaligned_le32(pbitmap), par);
}
}
-
- /* restore pix_width */
- wait_for_fifo(1, par);
- aty_st_le32(DP_PIX_WIDTH, pix_width_save, par);
}
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Vasily Averin <[email protected]>
commit feaf264ce7f8d54582e2f66eb82dd9dd124c94f3 upstream.
Fixes: d745a8c20c1f ("ext4: reduce contention on s_orphan_lock")
Fixes: 6e3617e579e0 ("ext4: Handle non empty on-disk orphan link")
Cc: Dmitry Monakhov <[email protected]>
Signed-off-by: Vasily Averin <[email protected]>
Signed-off-by: Theodore Ts'o <[email protected]>
Cc: [email protected] # 2.6.34
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/ext4/namei.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
--- a/fs/ext4/namei.c
+++ b/fs/ext4/namei.c
@@ -2604,7 +2604,9 @@ int ext4_orphan_add(handle_t *handle, st
list_del_init(&EXT4_I(inode)->i_orphan);
mutex_unlock(&sbi->s_orphan_lock);
}
- }
+ } else
+ brelse(iloc.bh);
+
jbd_debug(4, "superblock will point to %lu\n", inode->i_ino);
jbd_debug(4, "orphan inode %lu will point to %d\n",
inode->i_ino, NEXT_ORPHAN(inode));
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Vasily Averin <[email protected]>
commit 6bdc9977fcdedf47118d2caf7270a19f4b6d8a8f upstream.
Fixes: 3f2571c1f91f ("ext4: factor out xattr moving")
Fixes: 6dd4ee7cab7e ("ext4: Expand extra_inodes space per ...")
Reviewed-by: Jan Kara <[email protected]>
Signed-off-by: Vasily Averin <[email protected]>
Signed-off-by: Theodore Ts'o <[email protected]>
Cc: [email protected] # 2.6.23
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/ext4/xattr.c | 2 ++
1 file changed, 2 insertions(+)
--- a/fs/ext4/xattr.c
+++ b/fs/ext4/xattr.c
@@ -1489,6 +1489,8 @@ cleanup:
kfree(buffer);
if (is)
brelse(is->iloc.bh);
+ if (bs)
+ brelse(bs->bh);
kfree(is);
kfree(bs);
brelse(bh);
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Vasily Averin <[email protected]>
commit de59fae0043f07de5d25e02ca360f7d57bfa5866 upstream.
Fixes: dc6982ff4db1 ("ext4: refactor code to read directory blocks ...")
Signed-off-by: Vasily Averin <[email protected]>
Signed-off-by: Theodore Ts'o <[email protected]>
Cc: [email protected] # 3.9
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/ext4/namei.c | 1 +
1 file changed, 1 insertion(+)
--- a/fs/ext4/namei.c
+++ b/fs/ext4/namei.c
@@ -122,6 +122,7 @@ static struct buffer_head *__ext4_read_d
if (!is_dx_block && type == INDEX) {
ext4_error_inode(inode, __func__, line, block,
"directory leaf block found instead of index block");
+ brelse(bh);
return ERR_PTR(-EIO);
}
if (!ext4_has_metadata_csum(inode->i_sb) ||
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Eric W. Biederman <[email protected]>
commit 25d202ed820ee347edec0bf3bf553544556bf64b upstream.
It was recently pointed out that the one instance of testing MNT_LOCKED
outside of the namespace_sem is in ksys_umount.
Fix that by adding a test inside of do_umount with namespace_sem and
the mount_lock held. As it helps to fail fails the existing test is
maintained with an additional comment pointing out that it may be racy
because the locks are not held.
Cc: [email protected]
Reported-by: Al Viro <[email protected]>
Fixes: 5ff9d8a65ce8 ("vfs: Lock in place mounts from more privileged users")
Signed-off-by: "Eric W. Biederman" <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/namespace.c | 10 ++++++++--
1 file changed, 8 insertions(+), 2 deletions(-)
--- a/fs/namespace.c
+++ b/fs/namespace.c
@@ -1478,8 +1478,13 @@ static int do_umount(struct mount *mnt,
namespace_lock();
lock_mount_hash();
- event++;
+ /* Recheck MNT_LOCKED with the locks held */
+ retval = -EINVAL;
+ if (mnt->mnt.mnt_flags & MNT_LOCKED)
+ goto out;
+
+ event++;
if (flags & MNT_DETACH) {
if (!list_empty(&mnt->mnt_list))
umount_tree(mnt, UMOUNT_PROPAGATE);
@@ -1493,6 +1498,7 @@ static int do_umount(struct mount *mnt,
retval = 0;
}
}
+out:
unlock_mount_hash();
namespace_unlock();
return retval;
@@ -1571,7 +1577,7 @@ SYSCALL_DEFINE2(umount, char __user *, n
goto dput_and_out;
if (!check_mnt(mnt))
goto dput_and_out;
- if (mnt->mnt.mnt_flags & MNT_LOCKED)
+ if (mnt->mnt.mnt_flags & MNT_LOCKED) /* Check optimistically */
goto dput_and_out;
retval = -EPERM;
if (flags & MNT_FORCE && !capable(CAP_SYS_ADMIN))
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Eric W. Biederman <[email protected]>
commit df7342b240185d58d3d9665c0bbf0a0f5570ec29 upstream.
Jonathan Calmels from NVIDIA reported that he's able to bypass the
mount visibility security check in place in the Linux kernel by using
a combination of the unbindable property along with the private mount
propagation option to allow a unprivileged user to see a path which
was purposefully hidden by the root user.
Reproducer:
# Hide a path to all users using a tmpfs
root@castiana:~# mount -t tmpfs tmpfs /sys/devices/
root@castiana:~#
# As an unprivileged user, unshare user namespace and mount namespace
stgraber@castiana:~$ unshare -U -m -r
# Confirm the path is still not accessible
root@castiana:~# ls /sys/devices/
# Make /sys recursively unbindable and private
root@castiana:~# mount --make-runbindable /sys
root@castiana:~# mount --make-private /sys
# Recursively bind-mount the rest of /sys over to /mnnt
root@castiana:~# mount --rbind /sys/ /mnt
# Access our hidden /sys/device as an unprivileged user
root@castiana:~# ls /mnt/devices/
breakpoint cpu cstate_core cstate_pkg i915 intel_pt isa kprobe
LNXSYSTM:00 msr pci0000:00 platform pnp0 power software system
tracepoint uncore_arb uncore_cbox_0 uncore_cbox_1 uprobe virtual
Solve this by teaching copy_tree to fail if a mount turns out to be
both unbindable and locked.
Cc: [email protected]
Fixes: 5ff9d8a65ce8 ("vfs: Lock in place mounts from more privileged users")
Reported-by: Jonathan Calmels <[email protected]>
Signed-off-by: "Eric W. Biederman" <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/namespace.c | 10 ++++++++--
1 file changed, 8 insertions(+), 2 deletions(-)
--- a/fs/namespace.c
+++ b/fs/namespace.c
@@ -1661,8 +1661,14 @@ struct mount *copy_tree(struct mount *mn
struct mount *t = NULL;
if (!(flag & CL_COPY_UNBINDABLE) &&
IS_MNT_UNBINDABLE(s)) {
- s = skip_mnt_tree(s);
- continue;
+ if (s->mnt.mnt_flags & MNT_LOCKED) {
+ /* Both unbindable and locked. */
+ q = ERR_PTR(-EPERM);
+ goto out;
+ } else {
+ s = skip_mnt_tree(s);
+ continue;
+ }
}
if (!(flag & CL_COPY_MNT_NS_FILE) &&
is_mnt_ns_file(s->mnt.mnt_root)) {
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Changwei Ge <[email protected]>
commit 29aa30167a0a2e6045a0d6d2e89d8168132333d5 upstream.
Somehow, file system metadata was corrupted, which causes
ocfs2_check_dir_entry() to fail in function ocfs2_dir_foreach_blk_el().
According to the original design intention, if above happens we should
skip the problematic block and continue to retrieve dir entry. But
there is obviouse misuse of brelse around related code.
After failure of ocfs2_check_dir_entry(), current code just moves to
next position and uses the problematic buffer head again and again
during which the problematic buffer head is released for multiple times.
I suppose, this a serious issue which is long-lived in ocfs2. This may
cause other file systems which is also used in a the same host insane.
So we should also consider about bakcporting this patch into linux
-stable.
Link: http://lkml.kernel.org/r/HK2PR06MB045211675B43EED794E597B6D56E0@HK2PR06MB0452.apcprd06.prod.outlook.com
Signed-off-by: Changwei Ge <[email protected]>
Suggested-by: Changkuo Shi <[email protected]>
Reviewed-by: Andrew Morton <[email protected]>
Cc: Mark Fasheh <[email protected]>
Cc: Joel Becker <[email protected]>
Cc: Junxiao Bi <[email protected]>
Cc: Joseph Qi <[email protected]>
Cc: <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/ocfs2/dir.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
--- a/fs/ocfs2/dir.c
+++ b/fs/ocfs2/dir.c
@@ -1906,8 +1906,7 @@ static int ocfs2_dir_foreach_blk_el(stru
/* On error, skip the f_pos to the
next block. */
ctx->pos = (ctx->pos | (sb->s_blocksize - 1)) + 1;
- brelse(bh);
- continue;
+ break;
}
if (le64_to_cpu(de->inode)) {
unsigned char d_type = DT_UNKNOWN;
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Eric W. Biederman <[email protected]>
commit 9c8e0a1b683525464a2abe9fb4b54404a50ed2b4 upstream.
Timothy Baldwin <[email protected]> wrote:
> As per mount_namespaces(7) unprivileged users should not be able to look under mount points:
>
> Mounts that come as a single unit from more privileged mount are locked
> together and may not be separated in a less privileged mount namespace.
>
> However they can:
>
> 1. Create a mount namespace.
> 2. In the mount namespace open a file descriptor to the parent of a mount point.
> 3. Destroy the mount namespace.
> 4. Use the file descriptor to look under the mount point.
>
> I have reproduced this with Linux 4.16.18 and Linux 4.18-rc8.
>
> The setup:
>
> $ sudo sysctl kernel.unprivileged_userns_clone=1
> kernel.unprivileged_userns_clone = 1
> $ mkdir -p A/B/Secret
> $ sudo mount -t tmpfs hide A/B
>
>
> "Secret" is indeed hidden as expected:
>
> $ ls -lR A
> A:
> total 0
> drwxrwxrwt 2 root root 40 Feb 12 21:08 B
>
> A/B:
> total 0
>
>
> The attack revealing "Secret":
>
> $ unshare -Umr sh -c "exec unshare -m ls -lR /proc/self/fd/4/ 4<A"
> /proc/self/fd/4/:
> total 0
> drwxr-xr-x 3 root root 60 Feb 12 21:08 B
>
> /proc/self/fd/4/B:
> total 0
> drwxr-xr-x 2 root root 40 Feb 12 21:08 Secret
>
> /proc/self/fd/4/B/Secret:
> total 0
I tracked this down to put_mnt_ns running passing UMOUNT_SYNC and
disconnecting all of the mounts in a mount namespace. Fix this by
factoring drop_mounts out of drop_collected_mounts and passing
0 instead of UMOUNT_SYNC.
There are two possible behavior differences that result from this.
- No longer setting UMOUNT_SYNC will no longer set MNT_SYNC_UMOUNT on
the vfsmounts being unmounted. This effects the lazy rcu walk by
kicking the walk out of rcu mode and forcing it to be a non-lazy
walk.
- No longer disconnecting locked mounts will keep some mounts around
longer as they stay because the are locked to other mounts.
There are only two users of drop_collected mounts: audit_tree.c and
put_mnt_ns.
In audit_tree.c the mounts are private and there are no rcu lazy walks
only calls to iterate_mounts. So the changes should have no effect
except for a small timing effect as the connected mounts are disconnected.
In put_mnt_ns there may be references from process outside the mount
namespace to the mounts. So the mounts remaining connected will
be the bug fix that is needed. That rcu walks are allowed to continue
appears not to be a problem especially as the rcu walk change was about
an implementation detail not about semantics.
Cc: [email protected]
Fixes: 5ff9d8a65ce8 ("vfs: Lock in place mounts from more privileged users")
Reported-by: Timothy Baldwin <[email protected]>
Tested-by: Timothy Baldwin <[email protected]>
Signed-off-by: "Eric W. Biederman" <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/namespace.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/fs/namespace.c
+++ b/fs/namespace.c
@@ -1728,7 +1728,7 @@ void drop_collected_mounts(struct vfsmou
{
namespace_lock();
lock_mount_hash();
- umount_tree(real_mount(mnt), UMOUNT_SYNC);
+ umount_tree(real_mount(mnt), 0);
unlock_mount_hash();
namespace_unlock();
}
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Corey Wright <[email protected]>
[3.18.y only, to fix a previous patch]
__dm_destroy() takes io_barrier SRCU lock (dm_get_live_table) twice
which leads to a deadlock. Remove taking lock before holding
suspend_lock to prevent a different potential deadlock.
Signed-off-by: Corey Wright <[email protected]>
Fixes: e1db66a5fdcc ("dm: fix AB-BA deadlock in __dm_destroy()")
Cc: Sasha Levin <[email protected]>
---
drivers/md/dm.c | 1 -
1 file changed, 1 deletion(-)
--- a/drivers/md/dm.c
+++ b/drivers/md/dm.c
@@ -2589,7 +2589,6 @@ static void __dm_destroy(struct mapped_d
might_sleep();
spin_lock(&_minor_lock);
- map = dm_get_live_table(md, &srcu_idx);
idr_replace(&_minor_idr, MINOR_ALLOCED, MINOR(disk_devt(dm_disk(md))));
set_bit(DMF_FREEING, &md->flags);
spin_unlock(&_minor_lock);
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Guenter Roeck <[email protected]>
commit 1823342a1f2b47a4e6f5667f67cd28ab6bc4d6cd upstream.
gcc 8.1.0 complains:
fs/configfs/symlink.c:67:3: warning:
'strncpy' output truncated before terminating nul copying as many
bytes from a string as its length
fs/configfs/symlink.c: In function 'configfs_get_link':
fs/configfs/symlink.c:63:13: note: length computed here
Using strncpy() is indeed less than perfect since the length of data to
be copied has already been determined with strlen(). Replace strncpy()
with memcpy() to address the warning and optimize the code a little.
Signed-off-by: Guenter Roeck <[email protected]>
Signed-off-by: Christoph Hellwig <[email protected]>
Signed-off-by: Nobuhiro Iwamatsu <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/configfs/symlink.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/fs/configfs/symlink.c
+++ b/fs/configfs/symlink.c
@@ -64,7 +64,7 @@ static void fill_item_path(struct config
/* back up enough to print this bus id with '/' */
length -= cur;
- strncpy(buffer + length,config_item_name(p),cur);
+ memcpy(buffer + length, config_item_name(p), cur);
*(buffer + --length) = '/';
}
}
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Mike Kravetz <[email protected]>
commit 5e41540c8a0f0e98c337dda8b391e5dda0cde7cf upstream.
This bug has been experienced several times by the Oracle DB team. The
BUG is in remove_inode_hugepages() as follows:
/*
* If page is mapped, it was faulted in after being
* unmapped in caller. Unmap (again) now after taking
* the fault mutex. The mutex will prevent faults
* until we finish removing the page.
*
* This race can only happen in the hole punch case.
* Getting here in a truncate operation is a bug.
*/
if (unlikely(page_mapped(page))) {
BUG_ON(truncate_op);
In this case, the elevated map count is not the result of a race.
Rather it was incorrectly incremented as the result of a bug in the huge
pmd sharing code. Consider the following:
- Process A maps a hugetlbfs file of sufficient size and alignment
(PUD_SIZE) that a pmd page could be shared.
- Process B maps the same hugetlbfs file with the same size and
alignment such that a pmd page is shared.
- Process B then calls mprotect() to change protections for the mapping
with the shared pmd. As a result, the pmd is 'unshared'.
- Process B then calls mprotect() again to chage protections for the
mapping back to their original value. pmd remains unshared.
- Process B then forks and process C is created. During the fork
process, we do dup_mm -> dup_mmap -> copy_page_range to copy page
tables. Copying page tables for hugetlb mappings is done in the
routine copy_hugetlb_page_range.
In copy_hugetlb_page_range(), the destination pte is obtained by:
dst_pte = huge_pte_alloc(dst, addr, sz);
If pmd sharing is possible, the returned pointer will be to a pte in an
existing page table. In the situation above, process C could share with
either process A or process B. Since process A is first in the list,
the returned pte is a pointer to a pte in process A's page table.
However, the check for pmd sharing in copy_hugetlb_page_range is:
/* If the pagetables are shared don't copy or take references */
if (dst_pte == src_pte)
continue;
Since process C is sharing with process A instead of process B, the
above test fails. The code in copy_hugetlb_page_range which follows
assumes dst_pte points to a huge_pte_none pte. It copies the pte entry
from src_pte to dst_pte and increments this map count of the associated
page. This is how we end up with an elevated map count.
To solve, check the dst_pte entry for huge_pte_none. If !none, this
implies PMD sharing so do not copy.
Link: http://lkml.kernel.org/r/[email protected]
Fixes: c5c99429fa57 ("fix hugepages leak due to pagetable page sharing")
Signed-off-by: Mike Kravetz <[email protected]>
Reviewed-by: Naoya Horiguchi <[email protected]>
Cc: Michal Hocko <[email protected]>
Cc: Hugh Dickins <[email protected]>
Cc: Andrea Arcangeli <[email protected]>
Cc: "Kirill A . Shutemov" <[email protected]>
Cc: Davidlohr Bueso <[email protected]>
Cc: Prakash Sangappa <[email protected]>
Cc: <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
mm/hugetlb.c | 23 +++++++++++++++++++----
1 file changed, 19 insertions(+), 4 deletions(-)
--- a/mm/hugetlb.c
+++ b/mm/hugetlb.c
@@ -2576,7 +2576,7 @@ static int is_hugetlb_entry_hwpoisoned(p
int copy_hugetlb_page_range(struct mm_struct *dst, struct mm_struct *src,
struct vm_area_struct *vma)
{
- pte_t *src_pte, *dst_pte, entry;
+ pte_t *src_pte, *dst_pte, entry, dst_entry;
struct page *ptepage;
unsigned long addr;
int cow;
@@ -2604,15 +2604,30 @@ int copy_hugetlb_page_range(struct mm_st
break;
}
- /* If the pagetables are shared don't copy or take references */
- if (dst_pte == src_pte)
+ /*
+ * If the pagetables are shared don't copy or take references.
+ * dst_pte == src_pte is the common case of src/dest sharing.
+ *
+ * However, src could have 'unshared' and dst shares with
+ * another vma. If dst_pte !none, this implies sharing.
+ * Check here before taking page table lock, and once again
+ * after taking the lock below.
+ */
+ dst_entry = huge_ptep_get(dst_pte);
+ if ((dst_pte == src_pte) || !huge_pte_none(dst_entry))
continue;
dst_ptl = huge_pte_lock(h, dst, dst_pte);
src_ptl = huge_pte_lockptr(h, src, src_pte);
spin_lock_nested(src_ptl, SINGLE_DEPTH_NESTING);
entry = huge_ptep_get(src_pte);
- if (huge_pte_none(entry)) { /* skip none entry */
+ dst_entry = huge_ptep_get(dst_pte);
+ if (huge_pte_none(entry) || !huge_pte_none(dst_entry)) {
+ /*
+ * Skip if src entry none. Also, skip in the
+ * unlikely case dst entry !none as this implies
+ * sharing with another vma.
+ */
;
} else if (unlikely(is_hugetlb_entry_migration(entry) ||
is_hugetlb_entry_hwpoisoned(entry))) {
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: H. Peter Anvin <[email protected]>
commit 991a25194097006ec1e0d2e0814ff920e59e3465 upstream.
On architectures with CBAUDEX == 0 (Alpha and PowerPC), the code in tty_baudrate.c does
not do any limit checking on the tty_baudrate[] array, and in fact a
buffer overrun is possible on both architectures. Add a limit check to
prevent that situation.
This will be followed by a much bigger cleanup/simplification patch.
Signed-off-by: H. Peter Anvin (Intel) <[email protected]>
Requested-by: Cc: Johan Hovold <[email protected]>
Cc: Jiri Slaby <[email protected]>
Cc: Al Viro <[email protected]>
Cc: Richard Henderson <[email protected]>
Cc: Ivan Kokshaysky <[email protected]>
Cc: Matt Turner <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Kate Stewart <[email protected]>
Cc: Philippe Ombredanne <[email protected]>
Cc: Eugene Syromiatnikov <[email protected]>
Cc: Alan Cox <[email protected]>
Cc: stable <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/tty/tty_ioctl.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/drivers/tty/tty_ioctl.c
+++ b/drivers/tty/tty_ioctl.c
@@ -327,7 +327,7 @@ speed_t tty_termios_baud_rate(struct kte
else
cbaud += 15;
}
- return baud_table[cbaud];
+ return cbaud >= n_baud_table ? 0 : baud_table[cbaud];
}
EXPORT_SYMBOL(tty_termios_baud_rate);
@@ -363,7 +363,7 @@ speed_t tty_termios_input_baud_rate(stru
else
cbaud += 15;
}
- return baud_table[cbaud];
+ return cbaud >= n_baud_table ? 0 : baud_table[cbaud];
#else
return tty_termios_baud_rate(termios);
#endif
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: H. Peter Anvin (Intel) <[email protected]>
commit d0ffb805b729322626639336986bc83fc2e60871 upstream.
Alpha has had c_ispeed and c_ospeed, but still set speeds in c_cflags
using arbitrary flags. Because BOTHER is not defined, the general
Linux code doesn't allow setting arbitrary baud rates, and because
CBAUDEX == 0, we can have an array overrun of the baud_rate[] table in
drivers/tty/tty_baudrate.c if (c_cflags & CBAUD) == 037.
Resolve both problems by #defining BOTHER to 037 on Alpha.
However, userspace still needs to know if setting BOTHER is actually
safe given legacy kernels (does anyone actually care about that on
Alpha anymore?), so enable the TCGETS2/TCSETS*2 ioctls on Alpha, even
though they use the same structure. Define struct termios2 just for
compatibility; it is the exact same structure as struct termios. In a
future patchset, this will be cleaned up so the uapi headers are
usable from libc.
Signed-off-by: H. Peter Anvin (Intel) <[email protected]>
Cc: Jiri Slaby <[email protected]>
Cc: Al Viro <[email protected]>
Cc: Richard Henderson <[email protected]>
Cc: Ivan Kokshaysky <[email protected]>
Cc: Matt Turner <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Kate Stewart <[email protected]>
Cc: Philippe Ombredanne <[email protected]>
Cc: Eugene Syromiatnikov <[email protected]>
Cc: <[email protected]>
Cc: <[email protected]>
Cc: Johan Hovold <[email protected]>
Cc: Alan Cox <[email protected]>
Cc: <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/alpha/include/asm/termios.h | 8 +++++++-
arch/alpha/include/uapi/asm/ioctls.h | 5 +++++
arch/alpha/include/uapi/asm/termbits.h | 17 +++++++++++++++++
3 files changed, 29 insertions(+), 1 deletion(-)
--- a/arch/alpha/include/asm/termios.h
+++ b/arch/alpha/include/asm/termios.h
@@ -72,9 +72,15 @@
})
#define user_termios_to_kernel_termios(k, u) \
- copy_from_user(k, u, sizeof(struct termios))
+ copy_from_user(k, u, sizeof(struct termios2))
#define kernel_termios_to_user_termios(u, k) \
+ copy_to_user(u, k, sizeof(struct termios2))
+
+#define user_termios_to_kernel_termios_1(k, u) \
+ copy_from_user(k, u, sizeof(struct termios))
+
+#define kernel_termios_to_user_termios_1(u, k) \
copy_to_user(u, k, sizeof(struct termios))
#endif /* _ALPHA_TERMIOS_H */
--- a/arch/alpha/include/uapi/asm/ioctls.h
+++ b/arch/alpha/include/uapi/asm/ioctls.h
@@ -31,6 +31,11 @@
#define TCXONC _IO('t', 30)
#define TCFLSH _IO('t', 31)
+#define TCGETS2 _IOR('T', 42, struct termios2)
+#define TCSETS2 _IOW('T', 43, struct termios2)
+#define TCSETSW2 _IOW('T', 44, struct termios2)
+#define TCSETSF2 _IOW('T', 45, struct termios2)
+
#define TIOCSWINSZ _IOW('t', 103, struct winsize)
#define TIOCGWINSZ _IOR('t', 104, struct winsize)
#define TIOCSTART _IO('t', 110) /* start output, like ^Q */
--- a/arch/alpha/include/uapi/asm/termbits.h
+++ b/arch/alpha/include/uapi/asm/termbits.h
@@ -25,6 +25,19 @@ struct termios {
speed_t c_ospeed; /* output speed */
};
+/* Alpha has identical termios and termios2 */
+
+struct termios2 {
+ tcflag_t c_iflag; /* input mode flags */
+ tcflag_t c_oflag; /* output mode flags */
+ tcflag_t c_cflag; /* control mode flags */
+ tcflag_t c_lflag; /* local mode flags */
+ cc_t c_cc[NCCS]; /* control characters */
+ cc_t c_line; /* line discipline (== c_cc[19]) */
+ speed_t c_ispeed; /* input speed */
+ speed_t c_ospeed; /* output speed */
+};
+
/* Alpha has matching termios and ktermios */
struct ktermios {
@@ -147,6 +160,7 @@ struct ktermios {
#define B3000000 00034
#define B3500000 00035
#define B4000000 00036
+#define BOTHER 00037
#define CSIZE 00001400
#define CS5 00000000
@@ -164,6 +178,9 @@ struct ktermios {
#define CMSPAR 010000000000 /* mark or space (stick) parity */
#define CRTSCTS 020000000000 /* flow control */
+#define CIBAUD 07600000
+#define IBSHIFT 16
+
/* c_lflag bits */
#define ISIG 0x00000080
#define ICANON 0x00000100
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Vasily Averin <[email protected]>
commit cea5794122125bf67559906a0762186cf417099c upstream.
Fixes: 33afdcc5402d ("ext4: add a function which sets up group blocks ...")
Cc: [email protected] # 3.3
Signed-off-by: Vasily Averin <[email protected]>
Signed-off-by: Theodore Ts'o <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/ext4/resize.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
--- a/fs/ext4/resize.c
+++ b/fs/ext4/resize.c
@@ -429,16 +429,18 @@ static int set_flexbg_block_bitmap(struc
BUFFER_TRACE(bh, "get_write_access");
err = ext4_journal_get_write_access(handle, bh);
- if (err)
+ if (err) {
+ brelse(bh);
return err;
+ }
ext4_debug("mark block bitmap %#04llx (+%llu/%u)\n", block,
block - start, count2);
ext4_set_bits(bh->b_data, block - start, count2);
err = ext4_handle_dirty_metadata(handle, NULL, bh);
+ brelse(bh);
if (unlikely(err))
return err;
- brelse(bh);
}
return 0;
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Vasily Averin <[email protected]>
commit 9e4028935cca3f9ef9b6a90df9da6f1f94853536 upstream.
Currently bh is set to NULL only during first iteration of for cycle,
then this pointer is not cleared after end of using.
Therefore rollback after errors can lead to extra brelse(bh) call,
decrements bh counter and later trigger an unexpected warning in __brelse()
Patch moves brelse() calls in body of cycle to exclude requirement of
brelse() call in rollback.
Fixes: 33afdcc5402d ("ext4: add a function which sets up group blocks ...")
Signed-off-by: Vasily Averin <[email protected]>
Signed-off-by: Theodore Ts'o <[email protected]>
Cc: [email protected] # 3.3+
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/ext4/resize.c | 8 ++------
1 file changed, 2 insertions(+), 6 deletions(-)
--- a/fs/ext4/resize.c
+++ b/fs/ext4/resize.c
@@ -577,7 +577,6 @@ handle_bb:
bh = bclean(handle, sb, block);
if (IS_ERR(bh)) {
err = PTR_ERR(bh);
- bh = NULL;
goto out;
}
overhead = ext4_group_overhead_blocks(sb, group);
@@ -589,9 +588,9 @@ handle_bb:
ext4_mark_bitmap_end(group_data[i].blocks_count,
sb->s_blocksize * 8, bh->b_data);
err = ext4_handle_dirty_metadata(handle, NULL, bh);
+ brelse(bh);
if (err)
goto out;
- brelse(bh);
handle_ib:
if (bg_flags[i] & EXT4_BG_INODE_UNINIT)
@@ -606,18 +605,16 @@ handle_ib:
bh = bclean(handle, sb, block);
if (IS_ERR(bh)) {
err = PTR_ERR(bh);
- bh = NULL;
goto out;
}
ext4_mark_bitmap_end(EXT4_INODES_PER_GROUP(sb),
sb->s_blocksize * 8, bh->b_data);
err = ext4_handle_dirty_metadata(handle, NULL, bh);
+ brelse(bh);
if (err)
goto out;
- brelse(bh);
}
- bh = NULL;
/* Mark group tables in block bitmap */
for (j = 0; j < GROUP_TABLE_COUNT; j++) {
@@ -648,7 +645,6 @@ handle_ib:
}
out:
- brelse(bh);
err2 = ext4_journal_stop(handle);
if (err2 && !err)
err = err2;
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Mikulas Patocka <[email protected]>
commit 3c6c6a7878d00a3ac997a779c5b9861ff25dfcc8 upstream.
The code for manual bit triple is not endian-clean. It builds the variable
"hostdword" using byte accesses, therefore we must read the variable with
"le32_to_cpu".
The patch also enables (hardware or software) bit triple only if the image
is monochrome (image->depth). If we want to blit full-color image, we
shouldn't use the triple code.
Signed-off-by: Mikulas Patocka <[email protected]>
Reviewed-by: Ville Syrjälä <[email protected]>
Cc: [email protected]
Signed-off-by: Bartlomiej Zolnierkiewicz <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/video/fbdev/aty/mach64_accel.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
--- a/drivers/video/fbdev/aty/mach64_accel.c
+++ b/drivers/video/fbdev/aty/mach64_accel.c
@@ -344,7 +344,7 @@ void atyfb_imageblit(struct fb_info *inf
* since Rage 3D IIc we have DP_HOST_TRIPLE_EN bit
* this hwaccelerated triple has an issue with not aligned data
*/
- if (M64_HAS(HW_TRIPLE) && image->width % 8 == 0)
+ if (image->depth == 1 && M64_HAS(HW_TRIPLE) && image->width % 8 == 0)
pix_width |= DP_HOST_TRIPLE_EN;
}
@@ -381,7 +381,7 @@ void atyfb_imageblit(struct fb_info *inf
src_bytes = (((image->width * image->depth) + 7) / 8) * image->height;
/* manual triple each pixel */
- if (info->var.bits_per_pixel == 24 && !(pix_width & DP_HOST_TRIPLE_EN)) {
+ if (image->depth == 1 && info->var.bits_per_pixel == 24 && !(pix_width & DP_HOST_TRIPLE_EN)) {
int inbit, outbit, mult24, byte_id_in_dword, width;
u8 *pbitmapin = (u8*)image->data, *pbitmapout;
u32 hostdword;
@@ -414,7 +414,7 @@ void atyfb_imageblit(struct fb_info *inf
}
}
wait_for_fifo(1, par);
- aty_st_le32(HOST_DATA0, hostdword, par);
+ aty_st_le32(HOST_DATA0, le32_to_cpu(hostdword), par);
}
} else {
u32 *pbitmap, dwords = (src_bytes + 3) / 4;
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Nicholas Mc Guire <[email protected]>
[ Upstream commit c5d59528e24ad22500347b199d52b9368e686a42 ]
altera_hw_filt_init() which calls append_internal() assumes
that the node was successfully linked in while in fact it can
silently fail. So the call-site needs to set return to -ENOMEM
on append_internal() returning NULL and exit through the err path.
Fixes: 349bcf02e361 ("[media] Altera FPGA based CI driver module")
Signed-off-by: Nicholas Mc Guire <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/media/pci/cx23885/altera-ci.c | 10 ++++++++++
1 file changed, 10 insertions(+)
--- a/drivers/media/pci/cx23885/altera-ci.c
+++ b/drivers/media/pci/cx23885/altera-ci.c
@@ -662,6 +662,10 @@ static int altera_hw_filt_init(struct al
}
temp_int = append_internal(inter);
+ if (!temp_int) {
+ ret = -ENOMEM;
+ goto err;
+ }
inter->filts_used = 1;
inter->dev = config->dev;
inter->fpga_rw = config->fpga_rw;
@@ -696,6 +700,7 @@ err:
__func__, ret);
kfree(pid_filt);
+ kfree(inter);
return ret;
}
@@ -731,6 +736,10 @@ int altera_ci_init(struct altera_ci_conf
}
temp_int = append_internal(inter);
+ if (!temp_int) {
+ ret = -ENOMEM;
+ goto err;
+ }
inter->cis_used = 1;
inter->dev = config->dev;
inter->fpga_rw = config->fpga_rw;
@@ -799,6 +808,7 @@ err:
ci_dbg_print("%s: Cannot initialize CI: Error %d.\n", __func__, ret);
kfree(state);
+ kfree(inter);
return ret;
}
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Young_X <[email protected]>
commit e4f3aa2e1e67bb48dfbaaf1cad59013d5a5bc276 upstream.
There is another cast from unsigned long to int which causes
a bounds check to fail with specially crafted input. The value is
then used as an index in the slot array in cdrom_slot_status().
This issue is similar to CVE-2018-16658 and CVE-2018-10940.
Signed-off-by: Young_X <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
Cc: Ben Hutchings <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/cdrom/cdrom.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/cdrom/cdrom.c
+++ b/drivers/cdrom/cdrom.c
@@ -2424,7 +2424,7 @@ static int cdrom_ioctl_select_disc(struc
return -ENOSYS;
if (arg != CDSL_CURRENT && arg != CDSL_NONE) {
- if ((int)arg >= cdi->capacity)
+ if (arg >= cdi->capacity)
return -EINVAL;
}
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Vasily Averin <[email protected]>
commit ea0abbb648452cdb6e1734b702b6330a7448fcf8 upstream.
Fixes: ac27a0ec112a ("ext4: initial copy of files from ext3")
Signed-off-by: Vasily Averin <[email protected]>
Signed-off-by: Theodore Ts'o <[email protected]>
Cc: [email protected] # 2.6.19
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/ext4/resize.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
--- a/fs/ext4/resize.c
+++ b/fs/ext4/resize.c
@@ -1095,8 +1095,10 @@ static void update_backups(struct super_
backup_block, backup_block -
ext4_group_first_block_no(sb, group));
BUFFER_TRACE(bh, "get_write_access");
- if ((err = ext4_journal_get_write_access(handle, bh)))
+ if ((err = ext4_journal_get_write_access(handle, bh))) {
+ brelse(bh);
break;
+ }
lock_buffer(bh);
memcpy(bh->b_data, data, size);
if (rest)
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Theodore Ts'o <[email protected]>
commit 4f32c38b4662312dd3c5f113d8bdd459887fb773 upstream.
Fixes: b40971426a83 ("ext4: add error checking to calls to ...")
Reported-by: Vasily Averin <[email protected]>
Signed-off-by: Theodore Ts'o <[email protected]>
Cc: [email protected] # 2.6.38
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/ext4/resize.c | 1 +
1 file changed, 1 insertion(+)
--- a/fs/ext4/resize.c
+++ b/fs/ext4/resize.c
@@ -844,6 +844,7 @@ static int add_new_gdb(handle_t *handle,
err = ext4_handle_dirty_metadata(handle, NULL, gdb_bh);
if (unlikely(err)) {
ext4_std_error(sb, err);
+ iloc.bh = NULL;
goto exit_inode;
}
brelse(dind);
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Miklos Szeredi <[email protected]>
commit 7fabaf303458fcabb694999d6fa772cc13d4e217 upstream.
fuse_request_send_notify_reply() may fail if the connection was reset for
some reason (e.g. fs was unmounted). Don't leak request reference in this
case. Besides leaking memory, this resulted in fc->num_waiting not being
decremented and hence fuse_wait_aborted() left in a hanging and unkillable
state.
Fixes: 2d45ba381a74 ("fuse: add retrieve request")
Fixes: b8f95e5d13f5 ("fuse: umount should wait for all requests")
Reported-and-tested-by: [email protected]
Signed-off-by: Miklos Szeredi <[email protected]>
Cc: <[email protected]> #v2.6.36
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/fuse/dev.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
--- a/fs/fuse/dev.c
+++ b/fs/fuse/dev.c
@@ -1675,8 +1675,10 @@ static int fuse_retrieve(struct fuse_con
req->in.args[1].size = total_len;
err = fuse_request_send_notify_reply(fc, req, outarg->notify_unique);
- if (err)
+ if (err) {
fuse_retrieve_end(fc, req);
+ fuse_put_request(fc, req);
+ }
return err;
}
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Vasily Averin <[email protected]>
commit 61a9c11e5e7a0dab5381afa5d9d4dd5ebf18f7a0 upstream.
Fixes: 01f795f9e0d6 ("ext4: add online resizing support for meta_bg ...")
Signed-off-by: Vasily Averin <[email protected]>
Signed-off-by: Theodore Ts'o <[email protected]>
Cc: [email protected] # 3.7
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/ext4/resize.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
--- a/fs/ext4/resize.c
+++ b/fs/ext4/resize.c
@@ -899,6 +899,7 @@ static int add_new_gdb_meta_bg(struct su
sizeof(struct buffer_head *),
GFP_NOFS);
if (!n_group_desc) {
+ brelse(gdb_bh);
err = -ENOMEM;
ext4_warning(sb, "not enough memory for %lu groups",
gdb_num + 1);
@@ -914,8 +915,6 @@ static int add_new_gdb_meta_bg(struct su
ext4_kvfree(o_group_desc);
BUFFER_TRACE(gdb_bh, "get_write_access");
err = ext4_journal_get_write_access(handle, gdb_bh);
- if (unlikely(err))
- brelse(gdb_bh);
return err;
}
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Arnd Bergmann <[email protected]>
commit be2e1c9dcf76886a83fb1c433a316e26d4ca2550 upstream.
I noticed during the creation of another bugfix that the BCH_CONST_PARAMS
option that is set by DOCG3 breaks setting variable parameters for any
other users of the BCH library code.
The only other user we have today is the MTD_NAND software BCH
implementation (most flash controllers use hardware BCH these days
and are not affected). I considered removing BCH_CONST_PARAMS entirely
because of the inherent conflict, but according to the description in
lib/bch.c there is a significant performance benefit in keeping it.
To avoid the immediate problem of the conflict between MTD_NAND_BCH
and DOCG3, this only sets the constant parameters if MTD_NAND_BCH
is disabled, which should fix the problem for all cases that
are affected. This should also work for all stable kernels.
Note that there is only one machine that actually seems to use the
DOCG3 driver (arch/arm/mach-pxa/mioa701.c), so most users should have
the driver disabled, but it almost certainly shows up if we wanted
to test random kernels on machines that use software BCH in MTD.
Fixes: d13d19ece39f ("mtd: docg3: add ECC correction code")
Cc: [email protected]
Cc: Robert Jarzmik <[email protected]>
Signed-off-by: Arnd Bergmann <[email protected]>
Signed-off-by: Boris Brezillon <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/mtd/devices/Kconfig | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/mtd/devices/Kconfig
+++ b/drivers/mtd/devices/Kconfig
@@ -200,7 +200,7 @@ comment "Disk-On-Chip Device Drivers"
config MTD_DOCG3
tristate "M-Systems Disk-On-Chip G3"
select BCH
- select BCH_CONST_PARAMS
+ select BCH_CONST_PARAMS if !MTD_NAND_BCH
select BITREVERSE
---help---
This provides an MTD device driver for the M-Systems DiskOnChip
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Vasily Averin <[email protected]>
commit 45ae932d246f721e6584430017176cbcadfde610 upstream.
bs.bh was taken in previous ext4_xattr_block_find() call,
it should be released before re-using
Fixes: 7e01c8e5420b ("ext3/4: fix uninitialized bs in ...")
Signed-off-by: Vasily Averin <[email protected]>
Signed-off-by: Theodore Ts'o <[email protected]>
Cc: [email protected] # 2.6.26
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/ext4/xattr.c | 2 ++
1 file changed, 2 insertions(+)
--- a/fs/ext4/xattr.c
+++ b/fs/ext4/xattr.c
@@ -1162,6 +1162,8 @@ ext4_xattr_set_handle(handle_t *handle,
error = ext4_xattr_block_set(handle, inode, &i, &bs);
} else if (error == -ENOSPC) {
if (EXT4_I(inode)->i_file_acl && !bs.s.base) {
+ brelse(bs.bh);
+ bs.bh = NULL;
error = ext4_xattr_block_find(inode, &i, &bs);
if (error)
goto cleanup;
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Vasily Averin <[email protected]>
commit f348e2241fb73515d65b5d77dd9c174128a7fbf2 upstream.
Fixes: 117fff10d7f1 ("ext4: grow the s_flex_groups array as needed ...")
Signed-off-by: Vasily Averin <[email protected]>
Signed-off-by: Theodore Ts'o <[email protected]>
Cc: [email protected] # 3.7
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/ext4/resize.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/fs/ext4/resize.c
+++ b/fs/ext4/resize.c
@@ -1992,7 +1992,7 @@ retry:
err = ext4_alloc_flex_bg_array(sb, n_group + 1);
if (err)
- return err;
+ goto out;
err = ext4_mb_alloc_groupinfo(sb, n_group + 1);
if (err)
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Ondrej Mosnacek <[email protected]>
commit fbe1a850b3b1522e9fc22319ccbbcd2ab05328d2 upstream.
When the LRW block counter overflows, the current implementation returns
128 as the index to the precomputed multiplication table, which has 128
entries. This patch fixes it to return the correct value (127).
Fixes: 64470f1b8510 ("[CRYPTO] lrw: Liskov Rivest Wagner, a tweakable narrow block cipher mode")
Cc: <[email protected]> # 2.6.20+
Reported-by: Eric Biggers <[email protected]>
Signed-off-by: Ondrej Mosnacek <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
crypto/lrw.c | 7 ++++++-
1 file changed, 6 insertions(+), 1 deletion(-)
--- a/crypto/lrw.c
+++ b/crypto/lrw.c
@@ -132,7 +132,12 @@ static inline int get_index128(be128 *bl
return x + ffz(val);
}
- return x;
+ /*
+ * If we get here, then x == 128 and we are incrementing the counter
+ * from all ones to all zeros. This means we must return index 127, i.e.
+ * the one corresponding to key2*{ 1,...,1 }.
+ */
+ return 127;
}
static int crypt(struct blkcipher_desc *d,
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Al Viro <[email protected]>
commit 3df629d873f8683af6f0d34dfc743f637966d483 upstream.
get in sync with mount_bdev() handling of the same
Reported-by: [email protected]
Cc: [email protected]
Signed-off-by: Al Viro <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/gfs2/ops_fstype.c | 3 +++
1 file changed, 3 insertions(+)
--- a/fs/gfs2/ops_fstype.c
+++ b/fs/gfs2/ops_fstype.c
@@ -1358,6 +1358,9 @@ static struct dentry *gfs2_mount_meta(st
struct path path;
int error;
+ if (!dev_name || !*dev_name)
+ return ERR_PTR(-EINVAL);
+
error = kern_path(dev_name, LOOKUP_FOLLOW, &path);
if (error) {
pr_warn("path_lookup on %s returned error %d\n",
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Vasily Averin <[email protected]>
commit db6aee62406d9fbb53315fcddd81f1dc271d49fa upstream.
Fixes: 1c6bd7173d66 ("ext4: convert file system to meta_bg if needed ...")
Signed-off-by: Vasily Averin <[email protected]>
Signed-off-by: Theodore Ts'o <[email protected]>
Cc: [email protected] # 3.7
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/ext4/resize.c | 4 ++++
1 file changed, 4 insertions(+)
--- a/fs/ext4/resize.c
+++ b/fs/ext4/resize.c
@@ -2028,6 +2028,10 @@ retry:
n_blocks_count_retry = 0;
free_flex_gd(flex_gd);
flex_gd = NULL;
+ if (resize_inode) {
+ iput(resize_inode);
+ resize_inode = NULL;
+ }
goto retry;
}
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Krzysztof Kozlowski <[email protected]>
commit 8985167ecf57f97061599a155bb9652c84ea4913 upstream.
When driver is built as module and DT node contains clocks compatible
(e.g. "samsung,s2mps11-clk"), the module will not be autoloaded because
module aliases won't match.
The modalias from uevent: of:NclocksT<NULL>Csamsung,s2mps11-clk
The modalias from driver: platform:s2mps11-clk
The devices are instantiated by parent's MFD. However both Device Tree
bindings and parent define the compatible for clocks devices. In case
of module matching this DT compatible will be used.
The issue will not happen if this is a built-in (no need for module
matching) or when clocks DT node does not contain compatible (not
correct from bindings perspective but working for driver).
Note when backporting to stable kernels: adjust the list of device ID
entries.
Cc: <[email protected]>
Fixes: 53c31b3437a6 ("mfd: sec-core: Add of_compatible strings for clock MFD cells")
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Acked-by: Stephen Boyd <[email protected]>
Signed-off-by: Stephen Boyd <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/clk/clk-s2mps11.c | 30 ++++++++++++++++++++++++++++++
1 file changed, 30 insertions(+)
--- a/drivers/clk/clk-s2mps11.c
+++ b/drivers/clk/clk-s2mps11.c
@@ -285,6 +285,36 @@ static const struct platform_device_id s
};
MODULE_DEVICE_TABLE(platform, s2mps11_clk_id);
+#ifdef CONFIG_OF
+/*
+ * Device is instantiated through parent MFD device and device matching is done
+ * through platform_device_id.
+ *
+ * However if device's DT node contains proper clock compatible and driver is
+ * built as a module, then the *module* matching will be done trough DT aliases.
+ * This requires of_device_id table. In the same time this will not change the
+ * actual *device* matching so do not add .of_match_table.
+ */
+static const struct of_device_id s2mps11_dt_match[] = {
+ {
+ .compatible = "samsung,s2mps11-clk",
+ .data = (void *)S2MPS11X,
+ }, {
+ .compatible = "samsung,s2mps13-clk",
+ .data = (void *)S2MPS13X,
+ }, {
+ .compatible = "samsung,s2mps14-clk",
+ .data = (void *)S2MPS14X,
+ }, {
+ .compatible = "samsung,s5m8767-clk",
+ .data = (void *)S5M8767X,
+ }, {
+ /* Sentinel */
+ },
+};
+MODULE_DEVICE_TABLE(of, s2mps11_dt_match);
+#endif
+
static struct platform_driver s2mps11_clk_driver = {
.driver = {
.name = "s2mps11-clk",
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Max Filippov <[email protected]>
commit 40dc948f234b73497c3278875eb08a01d5854d3f upstream.
The bootloader may pass physical address of the boot parameters structure
to the MMUv3 kernel in the register a2. Code in the _SetupMMU block in
the arch/xtensa/kernel/head.S is supposed to map that physical address to
the virtual address in the configured virtual memory layout.
This code haven't been updated when additional 256+256 and 512+512
memory layouts were introduced and it may produce wrong addresses when
used with these layouts.
Cc: [email protected]
Signed-off-by: Max Filippov <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/xtensa/kernel/head.S | 7 +++++--
1 file changed, 5 insertions(+), 2 deletions(-)
--- a/arch/xtensa/kernel/head.S
+++ b/arch/xtensa/kernel/head.S
@@ -88,9 +88,12 @@ _SetupMMU:
initialize_mmu
#if defined(CONFIG_MMU) && XCHAL_HAVE_PTP_MMU && XCHAL_HAVE_SPANNING_WAY
rsr a2, excsave1
- movi a3, 0x08000000
+ movi a3, XCHAL_KSEG_PADDR
+ bltu a2, a3, 1f
+ sub a2, a2, a3
+ movi a3, XCHAL_KSEG_SIZE
bgeu a2, a3, 1f
- movi a3, 0xd0000000
+ movi a3, XCHAL_KSEG_CACHED_VADDR
add a2, a2, a3
wsr a2, excsave1
1:
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Marco Felsch <[email protected]>
[ Upstream commit bd24db04101f45a9c1d874fe21b0c7eab7bcadec ]
The driver ignored the width alignment which exists due to the UYVY
colorspace format. Fix the width alignment and make use of the the
provided v4l2 helper function to set the width, height and all
alignments in one.
Fixes: 963ddc63e20d ("[media] media: tvp5150: Add cropping support")
Signed-off-by: Marco Felsch <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/media/i2c/tvp5150.c | 14 +++++++++-----
1 file changed, 9 insertions(+), 5 deletions(-)
--- a/drivers/media/i2c/tvp5150.c
+++ b/drivers/media/i2c/tvp5150.c
@@ -864,9 +864,6 @@ static int tvp5150_s_crop(struct v4l2_su
/* tvp5150 has some special limits */
rect.left = clamp(rect.left, 0, TVP5150_MAX_CROP_LEFT);
- rect.width = clamp_t(unsigned int, rect.width,
- TVP5150_H_MAX - TVP5150_MAX_CROP_LEFT - rect.left,
- TVP5150_H_MAX - rect.left);
rect.top = clamp(rect.top, 0, TVP5150_MAX_CROP_TOP);
/* Calculate height based on current standard */
@@ -880,9 +877,16 @@ static int tvp5150_s_crop(struct v4l2_su
else
hmax = TVP5150_V_MAX_OTHERS;
- rect.height = clamp_t(unsigned int, rect.height,
+ /*
+ * alignments:
+ * - width = 2 due to UYVY colorspace
+ * - height, image = no special alignment
+ */
+ v4l_bound_align_image(&rect.width,
+ TVP5150_H_MAX - TVP5150_MAX_CROP_LEFT - rect.left,
+ TVP5150_H_MAX - rect.left, 1, &rect.height,
hmax - TVP5150_MAX_CROP_TOP - rect.top,
- hmax - rect.top);
+ hmax - rect.top, 0, 0);
tvp5150_write(sd, TVP5150_VERT_BLANKING_START, rect.top);
tvp5150_write(sd, TVP5150_VERT_BLANKING_STOP,
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Joel Stanley <[email protected]>
[ Upstream commit ee9d21b3b3583712029a0db65a4b7c081d08d3b3 ]
When building with clang crt0's _zimage_start is not marked weak, which
breaks the build when linking the kernel image:
$ objdump -t arch/powerpc/boot/crt0.o |grep _zimage_start$
0000000000000058 g .text 0000000000000000 _zimage_start
ld: arch/powerpc/boot/wrapper.a(crt0.o): in function '_zimage_start':
(.text+0x58): multiple definition of '_zimage_start';
arch/powerpc/boot/pseries-head.o:(.text+0x0): first defined here
Clang requires the .weak directive to appear after the symbol is
declared. The binutils manual says:
This directive sets the weak attribute on the comma separated list of
symbol names. If the symbols do not already exist, they will be
created.
So it appears this is different with clang. The only reference I could
see for this was an OpenBSD mailing list post[1].
Changing it to be after the declaration fixes building with Clang, and
still works with GCC.
$ objdump -t arch/powerpc/boot/crt0.o |grep _zimage_start$
0000000000000058 w .text 0000000000000000 _zimage_start
Reported to clang as https://bugs.llvm.org/show_bug.cgi?id=38921
[1] https://groups.google.com/forum/#!topic/fa.openbsd.tech/PAgKKen2YCY
Signed-off-by: Joel Stanley <[email protected]>
Reviewed-by: Nick Desaulniers <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/powerpc/boot/crt0.S | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
--- a/arch/powerpc/boot/crt0.S
+++ b/arch/powerpc/boot/crt0.S
@@ -47,8 +47,10 @@ p_end: .long _end
p_pstack: .long _platform_stack_top
#endif
- .weak _zimage_start
.globl _zimage_start
+ /* Clang appears to require the .weak directive to be after the symbol
+ * is defined. See https://bugs.llvm.org/show_bug.cgi?id=38921 */
+ .weak _zimage_start
_zimage_start:
.globl _zimage_start_lib
_zimage_start_lib:
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Miles Chen <[email protected]>
[ Upstream commit 33a1a7be198657c8ca26ad406c4d2a89b7162bcc ]
The issue is found by a fuzzing test.
If tty_find_polling_driver() recevies an incorrect input such as
',,' or '0b', the len becomes 0 and strncmp() always return 0.
In this case, a null p->ops->poll_init() is called and it causes a kernel
panic.
Fix this by checking name length against zero in tty_find_polling_driver().
$echo ,, > /sys/module/kgdboc/parameters/kgdboc
[ 20.804451] WARNING: CPU: 1 PID: 104 at drivers/tty/serial/serial_core.c:457
uart_get_baud_rate+0xe8/0x190
[ 20.804917] Modules linked in:
[ 20.805317] CPU: 1 PID: 104 Comm: sh Not tainted 4.19.0-rc7ajb #8
[ 20.805469] Hardware name: linux,dummy-virt (DT)
[ 20.805732] pstate: 20000005 (nzCv daif -PAN -UAO)
[ 20.805895] pc : uart_get_baud_rate+0xe8/0x190
[ 20.806042] lr : uart_get_baud_rate+0xc0/0x190
[ 20.806476] sp : ffffffc06acff940
[ 20.806676] x29: ffffffc06acff940 x28: 0000000000002580
[ 20.806977] x27: 0000000000009600 x26: 0000000000009600
[ 20.807231] x25: ffffffc06acffad0 x24: 00000000ffffeff0
[ 20.807576] x23: 0000000000000001 x22: 0000000000000000
[ 20.807807] x21: 0000000000000001 x20: 0000000000000000
[ 20.808049] x19: ffffffc06acffac8 x18: 0000000000000000
[ 20.808277] x17: 0000000000000000 x16: 0000000000000000
[ 20.808520] x15: ffffffffffffffff x14: ffffffff00000000
[ 20.808757] x13: ffffffffffffffff x12: 0000000000000001
[ 20.809011] x11: 0101010101010101 x10: ffffff880d59ff5f
[ 20.809292] x9 : ffffff880d59ff5e x8 : ffffffc06acffaf3
[ 20.809549] x7 : 0000000000000000 x6 : ffffff880d59ff5f
[ 20.809803] x5 : 0000000080008001 x4 : 0000000000000003
[ 20.810056] x3 : ffffff900853e6b4 x2 : dfffff9000000000
[ 20.810693] x1 : ffffffc06acffad0 x0 : 0000000000000cb0
[ 20.811005] Call trace:
[ 20.811214] uart_get_baud_rate+0xe8/0x190
[ 20.811479] serial8250_do_set_termios+0xe0/0x6f4
[ 20.811719] serial8250_set_termios+0x48/0x54
[ 20.811928] uart_set_options+0x138/0x1bc
[ 20.812129] uart_poll_init+0x114/0x16c
[ 20.812330] tty_find_polling_driver+0x158/0x200
[ 20.812545] configure_kgdboc+0xbc/0x1bc
[ 20.812745] param_set_kgdboc_var+0xb8/0x150
[ 20.812960] param_attr_store+0xbc/0x150
[ 20.813160] module_attr_store+0x40/0x58
[ 20.813364] sysfs_kf_write+0x8c/0xa8
[ 20.813563] kernfs_fop_write+0x154/0x290
[ 20.813764] vfs_write+0xf0/0x278
[ 20.813951] __arm64_sys_write+0x84/0xf4
[ 20.814400] el0_svc_common+0xf4/0x1dc
[ 20.814616] el0_svc_handler+0x98/0xbc
[ 20.814804] el0_svc+0x8/0xc
[ 20.822005] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000
[ 20.826913] Mem abort info:
[ 20.827103] ESR = 0x84000006
[ 20.827352] Exception class = IABT (current EL), IL = 16 bits
[ 20.827655] SET = 0, FnV = 0
[ 20.827855] EA = 0, S1PTW = 0
[ 20.828135] user pgtable: 4k pages, 39-bit VAs, pgdp = (____ptrval____)
[ 20.828484] [0000000000000000] pgd=00000000aadee003, pud=00000000aadee003, pmd=0000000000000000
[ 20.829195] Internal error: Oops: 84000006 [#1] SMP
[ 20.829564] Modules linked in:
[ 20.829890] CPU: 1 PID: 104 Comm: sh Tainted: G W 4.19.0-rc7ajb #8
[ 20.830545] Hardware name: linux,dummy-virt (DT)
[ 20.830829] pstate: 60000085 (nZCv daIf -PAN -UAO)
[ 20.831174] pc : (null)
[ 20.831457] lr : serial8250_do_set_termios+0x358/0x6f4
[ 20.831727] sp : ffffffc06acff9b0
[ 20.831936] x29: ffffffc06acff9b0 x28: ffffff9008d7c000
[ 20.832267] x27: ffffff900969e16f x26: 0000000000000000
[ 20.832589] x25: ffffff900969dfb0 x24: 0000000000000000
[ 20.832906] x23: ffffffc06acffad0 x22: ffffff900969e160
[ 20.833232] x21: 0000000000000000 x20: ffffffc06acffac8
[ 20.833559] x19: ffffff900969df90 x18: 0000000000000000
[ 20.833878] x17: 0000000000000000 x16: 0000000000000000
[ 20.834491] x15: ffffffffffffffff x14: ffffffff00000000
[ 20.834821] x13: ffffffffffffffff x12: 0000000000000001
[ 20.835143] x11: 0101010101010101 x10: ffffff880d59ff5f
[ 20.835467] x9 : ffffff880d59ff5e x8 : ffffffc06acffaf3
[ 20.835790] x7 : 0000000000000000 x6 : ffffff880d59ff5f
[ 20.836111] x5 : c06419717c314100 x4 : 0000000000000007
[ 20.836419] x3 : 0000000000000000 x2 : 0000000000000000
[ 20.836732] x1 : 0000000000000001 x0 : ffffff900969df90
[ 20.837100] Process sh (pid: 104, stack limit = 0x(____ptrval____))
[ 20.837396] Call trace:
[ 20.837566] (null)
[ 20.837816] serial8250_set_termios+0x48/0x54
[ 20.838089] uart_set_options+0x138/0x1bc
[ 20.838570] uart_poll_init+0x114/0x16c
[ 20.838834] tty_find_polling_driver+0x158/0x200
[ 20.839119] configure_kgdboc+0xbc/0x1bc
[ 20.839380] param_set_kgdboc_var+0xb8/0x150
[ 20.839658] param_attr_store+0xbc/0x150
[ 20.839920] module_attr_store+0x40/0x58
[ 20.840183] sysfs_kf_write+0x8c/0xa8
[ 20.840183] sysfs_kf_write+0x8c/0xa8
[ 20.840440] kernfs_fop_write+0x154/0x290
[ 20.840702] vfs_write+0xf0/0x278
[ 20.840942] __arm64_sys_write+0x84/0xf4
[ 20.841209] el0_svc_common+0xf4/0x1dc
[ 20.841471] el0_svc_handler+0x98/0xbc
[ 20.841713] el0_svc+0x8/0xc
[ 20.842057] Code: bad PC value
[ 20.842764] ---[ end trace a8835d7de79aaadf ]---
[ 20.843134] Kernel panic - not syncing: Fatal exception
[ 20.843515] SMP: stopping secondary CPUs
[ 20.844289] Kernel Offset: disabled
[ 20.844634] CPU features: 0x0,21806002
[ 20.844857] Memory Limit: none
[ 20.845172] ---[ end Kernel panic - not syncing: Fatal exception ]---
Signed-off-by: Miles Chen <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/tty/tty_io.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/tty/tty_io.c
+++ b/drivers/tty/tty_io.c
@@ -357,7 +357,7 @@ struct tty_driver *tty_find_polling_driv
mutex_lock(&tty_mutex);
/* Search through the tty devices to look for a match */
list_for_each_entry(p, &tty_drivers, tty_drivers) {
- if (strncmp(name, p->name, len) != 0)
+ if (!len || strncmp(name, p->name, len) != 0)
continue;
stp = str;
if (*stp == ',')
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Stefan Nuernberger <[email protected]>
commit 076ed3da0c9b2f88d9157dbe7044a45641ae369e upstream.
commit 40413955ee26 ("Cipso: cipso_v4_optptr enter infinite loop") fixed
a possible infinite loop in the IP option parsing of CIPSO. The fix
assumes that ip_options_compile filtered out all zero length options and
that no other one-byte options beside IPOPT_END and IPOPT_NOOP exist.
While this assumption currently holds true, add explicit checks for zero
length and invalid length options to be safe for the future. Even though
ip_options_compile should have validated the options, the introduction of
new one-byte options can still confuse this code without the additional
checks.
Signed-off-by: Stefan Nuernberger <[email protected]>
Cc: David Woodhouse <[email protected]>
Cc: Simon Veith <[email protected]>
Cc: [email protected]
Acked-by: Paul Moore <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/ipv4/cipso_ipv4.c | 11 +++++++----
1 file changed, 7 insertions(+), 4 deletions(-)
--- a/net/ipv4/cipso_ipv4.c
+++ b/net/ipv4/cipso_ipv4.c
@@ -1580,7 +1580,7 @@ static int cipso_v4_parsetag_loc(const s
*
* Description:
* Parse the packet's IP header looking for a CIPSO option. Returns a pointer
- * to the start of the CIPSO option on success, NULL if one if not found.
+ * to the start of the CIPSO option on success, NULL if one is not found.
*
*/
unsigned char *cipso_v4_optptr(const struct sk_buff *skb)
@@ -1590,10 +1590,8 @@ unsigned char *cipso_v4_optptr(const str
int optlen;
int taglen;
- for (optlen = iph->ihl*4 - sizeof(struct iphdr); optlen > 0; ) {
+ for (optlen = iph->ihl*4 - sizeof(struct iphdr); optlen > 1; ) {
switch (optptr[0]) {
- case IPOPT_CIPSO:
- return optptr;
case IPOPT_END:
return NULL;
case IPOPT_NOOP:
@@ -1602,6 +1600,11 @@ unsigned char *cipso_v4_optptr(const str
default:
taglen = optptr[1];
}
+ if (!taglen || taglen > optlen)
+ return NULL;
+ if (optptr[0] == IPOPT_CIPSO)
+ return optptr;
+
optlen -= taglen;
optptr += taglen;
}
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Maciej W. Rozycki <[email protected]>
commit 3f2aa244ee1a0d17ed5b6c86564d2c1b24d1c96b upstream.
Fix a TURBOchannel support regression with commit 205e1b7f51e4
("dma-mapping: warn when there is no coherent_dma_mask") that caused
coherent DMA allocations to produce a warning such as:
defxx: v1.11 2014/07/01 Lawrence V. Stefani and others
tc1: DEFTA at MMIO addr = 0x1e900000, IRQ = 20, Hardware addr = 08-00-2b-a3-a3-29
------------[ cut here ]------------
WARNING: CPU: 0 PID: 1 at ./include/linux/dma-mapping.h:516 dfx_dev_register+0x670/0x678
Modules linked in:
CPU: 0 PID: 1 Comm: swapper Not tainted 4.19.0-rc6 #2
Stack : ffffffff8009ffc0 fffffffffffffec0 0000000000000000 ffffffff80647650
0000000000000000 0000000000000000 ffffffff806f5f80 ffffffffffffffff
0000000000000000 0000000000000000 0000000000000001 ffffffff8065d4e8
98000000031b6300 ffffffff80563478 ffffffff805685b0 ffffffffffffffff
0000000000000000 ffffffff805d6720 0000000000000204 ffffffff80388df8
0000000000000000 0000000000000009 ffffffff8053efd0 ffffffff806657d0
0000000000000000 ffffffff803177f8 0000000000000000 ffffffff806d0000
9800000003078000 980000000307b9e0 000000001e900000 ffffffff80067940
0000000000000000 ffffffff805d6720 0000000000000204 ffffffff80388df8
ffffffff805176c0 ffffffff8004dc78 0000000000000000 ffffffff80067940
...
Call Trace:
[<ffffffff8004dc78>] show_stack+0xa0/0x130
[<ffffffff80067940>] __warn+0x128/0x170
---[ end trace b1d1e094f67f3bb2 ]---
This is because the TURBOchannel bus driver fails to set the coherent
DMA mask for devices enumerated.
Set the regular and coherent DMA masks for TURBOchannel devices then,
observing that the bus protocol supports a 34-bit (16GiB) DMA address
space, by interpreting the value presented in the address cycle across
the 32 `ad' lines as a 32-bit word rather than byte address[1]. The
architectural size of the TURBOchannel DMA address space exceeds the
maximum amount of RAM any actual TURBOchannel system in existence may
have, hence both masks are the same.
This removes the warning shown above.
References:
[1] "TURBOchannel Hardware Specification", EK-369AA-OD-007B, Digital
Equipment Corporation, January 1993, Section "DMA", pp. 1-15 -- 1-17
Signed-off-by: Maciej W. Rozycki <[email protected]>
Signed-off-by: Paul Burton <[email protected]>
Patchwork: https://patchwork.linux-mips.org/patch/20835/
Fixes: 205e1b7f51e4 ("dma-mapping: warn when there is no coherent_dma_mask")
Cc: [email protected] # 4.16+
Cc: Ralf Baechle <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/tc/tc.c | 8 +++++++-
include/linux/tc.h | 1 +
2 files changed, 8 insertions(+), 1 deletion(-)
--- a/drivers/tc/tc.c
+++ b/drivers/tc/tc.c
@@ -2,7 +2,7 @@
* TURBOchannel bus services.
*
* Copyright (c) Harald Koerfgen, 1998
- * Copyright (c) 2001, 2003, 2005, 2006 Maciej W. Rozycki
+ * Copyright (c) 2001, 2003, 2005, 2006, 2018 Maciej W. Rozycki
* Copyright (c) 2005 James Simmons
*
* This file is subject to the terms and conditions of the GNU
@@ -10,6 +10,7 @@
* directory of this archive for more details.
*/
#include <linux/compiler.h>
+#include <linux/dma-mapping.h>
#include <linux/errno.h>
#include <linux/init.h>
#include <linux/ioport.h>
@@ -93,6 +94,11 @@ static void __init tc_bus_add_devices(st
tdev->dev.bus = &tc_bus_type;
tdev->slot = slot;
+ /* TURBOchannel has 34-bit DMA addressing (16GiB space). */
+ tdev->dma_mask = DMA_BIT_MASK(34);
+ tdev->dev.dma_mask = &tdev->dma_mask;
+ tdev->dev.coherent_dma_mask = DMA_BIT_MASK(34);
+
for (i = 0; i < 8; i++) {
tdev->firmware[i] =
readb(module + offset + TC_FIRM_VER + 4 * i);
--- a/include/linux/tc.h
+++ b/include/linux/tc.h
@@ -84,6 +84,7 @@ struct tc_dev {
device. */
struct device dev; /* Generic device interface. */
struct resource resource; /* Address space of this device. */
+ u64 dma_mask; /* DMA addressable range. */
char vendor[9];
char name[9];
char firmware[9];
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Eugen Hristev <[email protected]>
commit bc1b45326223e7e890053cf6266357adfa61942d upstream.
When doing simple conversions, the driver did not acknowledge the DRDY irq.
If this irq status is not acked, it will be left pending, and as soon as a
trigger is enabled, the irq handler will be called, it doesn't know why
this status has occurred because no channel is pending, and then it will go
int a irq loop and board will hang.
To avoid this situation, read the LCDR after a raw conversion is done.
Fixes: 0e589d5fb ("ARM: AT91: IIO: Add AT91 ADC driver.")
Cc: Maxime Ripard <[email protected]>
Signed-off-by: Eugen Hristev <[email protected]>
Acked-by: Ludovic Desroches <[email protected]>
Cc: <[email protected]>
Signed-off-by: Jonathan Cameron <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/iio/adc/at91_adc.c | 2 ++
1 file changed, 2 insertions(+)
--- a/drivers/iio/adc/at91_adc.c
+++ b/drivers/iio/adc/at91_adc.c
@@ -276,6 +276,8 @@ static void handle_adc_eoc_trigger(int i
iio_trigger_poll(idev->trig);
} else {
st->last_value = at91_adc_readl(st, AT91_ADC_CHAN(st, st->chnb));
+ /* Needed to ACK the DRDY interruption */
+ at91_adc_readl(st, AT91_ADC_LCDR);
st->done = true;
wake_up_interruptible(&st->wq_data_avail);
}
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Theodore Ts'o <[email protected]>
[ Upstream commit f18b2b83a727a3db208308057d2c7945f368e625 ]
If the starting block number of either the source or destination file
exceeds the EOF, EXT4_IOC_MOVE_EXT should return EINVAL.
Also fixed the helper function mext_check_coverage() so that if the
logical block is beyond EOF, make it return immediately, instead of
looping until the block number wraps all the away around. This takes
long enough that if there are multiple threads trying to do pound on
an the same inode doing non-sensical things, it can end up triggering
the kernel's soft lockup detector.
Reported-by: [email protected]
Signed-off-by: Theodore Ts'o <[email protected]>
Cc: [email protected]
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/ext4/move_extent.c | 8 ++++++--
1 file changed, 6 insertions(+), 2 deletions(-)
--- a/fs/ext4/move_extent.c
+++ b/fs/ext4/move_extent.c
@@ -533,9 +533,13 @@ mext_check_arguments(struct inode *orig_
orig_inode->i_ino, donor_inode->i_ino);
return -EINVAL;
}
- if (orig_eof < orig_start + *len - 1)
+ if (orig_eof <= orig_start)
+ *len = 0;
+ else if (orig_eof < orig_start + *len - 1)
*len = orig_eof - orig_start;
- if (donor_eof < donor_start + *len - 1)
+ if (donor_eof <= donor_start)
+ *len = 0;
+ else if (donor_eof < donor_start + *len - 1)
*len = donor_eof - donor_start;
if (!*len) {
ext4_debug("ext4 move extent: len should not be 0 "
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Nathan Chancellor <[email protected]>
[ Upstream commit 8c3bf9b62b667456a57aefcf1689e826df146159 ]
Clang currently warns:
drivers/net/ethernet/qlogic/qla3xxx.c:384:24: warning: signed shift
result (0xF00000000) requires 37 bits to represent, but 'int' only has
32 bits [-Wshift-overflow]
((ISP_NVRAM_MASK << 16) | qdev->eeprom_cmd_data));
~~~~~~~~~~~~~~ ^ ~~
1 warning generated.
The warning is certainly accurate since ISP_NVRAM_MASK is defined as
(0x000F << 16) which is then shifted by 16, resulting in 64424509440,
well above UINT_MAX.
Given that this is the only location in this driver where ISP_NVRAM_MASK
is shifted again, it seems likely that ISP_NVRAM_MASK was originally
defined without a shift and during the move of the shift to the
definition, this statement wasn't properly removed (since ISP_NVRAM_MASK
is used in the statenent right above this). Only the maintainers can
confirm this since this statment has been here since the driver was
first added to the kernel.
Link: https://github.com/ClangBuiltLinux/linux/issues/127
Signed-off-by: Nathan Chancellor <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/qlogic/qla3xxx.c | 2 --
1 file changed, 2 deletions(-)
--- a/drivers/net/ethernet/qlogic/qla3xxx.c
+++ b/drivers/net/ethernet/qlogic/qla3xxx.c
@@ -382,8 +382,6 @@ static void fm93c56a_select(struct ql3_a
qdev->eeprom_cmd_data = AUBURN_EEPROM_CS_1;
ql_write_nvram_reg(qdev, spir, ISP_NVRAM_MASK | qdev->eeprom_cmd_data);
- ql_write_nvram_reg(qdev, spir,
- ((ISP_NVRAM_MASK << 16) | qdev->eeprom_cmd_data));
}
/*
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Hou Tao <[email protected]>
commit 92e2921f7eee63450a5f953f4b15dc6210219430 upstream.
When an invalid mount option is passed to jffs2, jffs2_parse_options()
will fail and jffs2_sb_info will be freed, but then jffs2_sb_info will
be used (use-after-free) and freeed (double-free) in jffs2_kill_sb().
Fix it by removing the buggy invocation of kfree() when getting invalid
mount options.
Fixes: 92abc475d8de ("jffs2: implement mount option parsing and compression overriding")
Cc: [email protected]
Signed-off-by: Hou Tao <[email protected]>
Reviewed-by: Richard Weinberger <[email protected]>
Signed-off-by: Boris Brezillon <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/jffs2/super.c | 4 +---
1 file changed, 1 insertion(+), 3 deletions(-)
--- a/fs/jffs2/super.c
+++ b/fs/jffs2/super.c
@@ -285,10 +285,8 @@ static int jffs2_fill_super(struct super
sb->s_fs_info = c;
ret = jffs2_parse_options(c, data);
- if (ret) {
- kfree(c);
+ if (ret)
return -EINVAL;
- }
/* Initialize JFFS2 superblock locks, the further initialization will
* be done later */
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Finn Thain <[email protected]>
[ Upstream commit fd47d919d0c336e7c22862b51ee94927ffea227a ]
If a target disconnects during a PIO data transfer the command may fail
when the target reconnects:
scsi host1: DMA length is zero!
scsi host1: cur adr[04380000] len[00000000]
The scsi bus is then reset. This happens because the residual reached
zero before the transfer was completed.
The usual residual calculation relies on the Transfer Count registers.
That works for DMA transfers but not for PIO transfers. Fix the problem
by storing the PIO transfer residual and using that to correctly
calculate bytes_sent.
Fixes: 6fe07aaffbf0 ("[SCSI] m68k: new mac_esp scsi driver")
Tested-by: Stan Johnson <[email protected]>
Signed-off-by: Finn Thain <[email protected]>
Tested-by: Michael Schmitz <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/scsi/esp_scsi.c | 1 +
drivers/scsi/esp_scsi.h | 2 ++
drivers/scsi/mac_esp.c | 2 ++
3 files changed, 5 insertions(+)
--- a/drivers/scsi/esp_scsi.c
+++ b/drivers/scsi/esp_scsi.c
@@ -1316,6 +1316,7 @@ static int esp_data_bytes_sent(struct es
bytes_sent = esp->data_dma_len;
bytes_sent -= ecount;
+ bytes_sent -= esp->send_cmd_residual;
if (!(ent->flags & ESP_CMD_FLAG_WRITE))
bytes_sent -= fifo_cnt;
--- a/drivers/scsi/esp_scsi.h
+++ b/drivers/scsi/esp_scsi.h
@@ -524,6 +524,8 @@ struct esp {
void *dma;
int dmarev;
+
+ u32 send_cmd_residual;
};
/* A front-end driver for the ESP chip should do the following in
--- a/drivers/scsi/mac_esp.c
+++ b/drivers/scsi/mac_esp.c
@@ -426,6 +426,8 @@ static void mac_esp_send_pio_cmd(struct
scsi_esp_cmd(esp, ESP_CMD_TI);
}
}
+
+ esp->send_cmd_residual = esp_count;
}
static int mac_esp_irq_pending(struct esp *esp)
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Prarit Bhargava <[email protected]>
[ Upstream commit f69ffc5d3db8f1f03fd6d1df5930f9a1fbd787b6 ]
cpupower crashes on VMWare guests. The guests have the AMD PStateDef MSR
(0xC0010064 + state number) set to zero. As a result fid and did are zero
and the crash occurs because of a divide by zero (cof = fid/did). This
can be prevented by checking the enable bit in the PStateDef MSR before
calculating cof. By doing this the value of pstate[i] remains zero and
the value can be tested before displaying the active Pstates.
Check the enable bit in the PstateDef register for all supported families
and only print out enabled Pstates.
Signed-off-by: Prarit Bhargava <[email protected]>
Cc: Shuah Khan <[email protected]>
Cc: Stafford Horne <[email protected]>
Signed-off-by: Shuah Khan (Samsung OSG) <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
tools/power/cpupower/utils/cpufreq-info.c | 2 ++
tools/power/cpupower/utils/helpers/amd.c | 5 +++++
2 files changed, 7 insertions(+)
--- a/tools/power/cpupower/utils/cpufreq-info.c
+++ b/tools/power/cpupower/utils/cpufreq-info.c
@@ -200,6 +200,8 @@ static int get_boost_mode(unsigned int c
printf(_(" Boost States: %d\n"), b_states);
printf(_(" Total States: %d\n"), pstate_no);
for (i = 0; i < pstate_no; i++) {
+ if (!pstates[i])
+ continue;
if (i < b_states)
printf(_(" Pstate-Pb%d: %luMHz (boost state)"
"\n"), i, pstates[i]);
--- a/tools/power/cpupower/utils/helpers/amd.c
+++ b/tools/power/cpupower/utils/helpers/amd.c
@@ -103,6 +103,11 @@ int decode_pstates(unsigned int cpu, uns
}
if (read_msr(cpu, MSR_AMD_PSTATE + i, &pstate.val))
return -1;
+ if ((cpu_family == 0x17) && (!pstate.fam17h_bits.en))
+ continue;
+ else if (!pstate.bits.en)
+ continue;
+
pstates[i] = get_cof(cpu_family, pstate);
}
*no = i;
On 11/19/2018 11:28 AM, Greg Kroah-Hartman wrote:
> 3.18-stable review patch. If anyone has any objections, please let me know.
>
> ------------------
>
> From: Prarit Bhargava <[email protected]>
>
> [ Upstream commit f69ffc5d3db8f1f03fd6d1df5930f9a1fbd787b6 ]
Greg, as previously mentioned to Sasha, this patch also needs 8c22e2f69592
("cpupower: Fix AMD Family 0x17 msr_pstate size"). I did not see a message
indicating that 8c22e2f69592 was also being backported to 3.18-stable. My
apologies if I missed it.
P.
>
> cpupower crashes on VMWare guests. The guests have the AMD PStateDef MSR
> (0xC0010064 + state number) set to zero. As a result fid and did are zero
> and the crash occurs because of a divide by zero (cof = fid/did). This
> can be prevented by checking the enable bit in the PStateDef MSR before
> calculating cof. By doing this the value of pstate[i] remains zero and
> the value can be tested before displaying the active Pstates.
>
> Check the enable bit in the PstateDef register for all supported families
> and only print out enabled Pstates.
>
> Signed-off-by: Prarit Bhargava <[email protected]>
> Cc: Shuah Khan <[email protected]>
> Cc: Stafford Horne <[email protected]>
> Signed-off-by: Shuah Khan (Samsung OSG) <[email protected]>
> Signed-off-by: Sasha Levin <[email protected]>
> Signed-off-by: Greg Kroah-Hartman <[email protected]>
> ---
> tools/power/cpupower/utils/cpufreq-info.c | 2 ++
> tools/power/cpupower/utils/helpers/amd.c | 5 +++++
> 2 files changed, 7 insertions(+)
>
> --- a/tools/power/cpupower/utils/cpufreq-info.c
> +++ b/tools/power/cpupower/utils/cpufreq-info.c
> @@ -200,6 +200,8 @@ static int get_boost_mode(unsigned int c
> printf(_(" Boost States: %d\n"), b_states);
> printf(_(" Total States: %d\n"), pstate_no);
> for (i = 0; i < pstate_no; i++) {
> + if (!pstates[i])
> + continue;
> if (i < b_states)
> printf(_(" Pstate-Pb%d: %luMHz (boost state)"
> "\n"), i, pstates[i]);
> --- a/tools/power/cpupower/utils/helpers/amd.c
> +++ b/tools/power/cpupower/utils/helpers/amd.c
> @@ -103,6 +103,11 @@ int decode_pstates(unsigned int cpu, uns
> }
> if (read_msr(cpu, MSR_AMD_PSTATE + i, &pstate.val))
> return -1;
> + if ((cpu_family == 0x17) && (!pstate.fam17h_bits.en))
> + continue;
> + else if (!pstate.bits.en)
> + continue;
> +
> pstates[i] = get_cof(cpu_family, pstate);
> }
> *no = i;
>
>
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Waiman Long <[email protected]>
[ Upstream commit 9506a7425b094d2f1d9c877ed5a78f416669269b ]
It was found that when debug_locks was turned off because of a problem
found by the lockdep code, the system performance could drop quite
significantly when the lock_stat code was also configured into the
kernel. For instance, parallel kernel build time on a 4-socket x86-64
server nearly doubled.
Further analysis into the cause of the slowdown traced back to the
frequent call to debug_locks_off() from the __lock_acquired() function
probably due to some inconsistent lockdep states with debug_locks
off. The debug_locks_off() function did an unconditional atomic xchg
to write a 0 value into debug_locks which had already been set to 0.
This led to severe cacheline contention in the cacheline that held
debug_locks. As debug_locks is being referenced in quite a few different
places in the kernel, this greatly slow down the system performance.
To prevent that trashing of debug_locks cacheline, lock_acquired()
and lock_contended() now checks the state of debug_locks before
proceeding. The debug_locks_off() function is also modified to check
debug_locks before calling __debug_locks_off().
Signed-off-by: Waiman Long <[email protected]>
Cc: Andrew Morton <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Paul E. McKenney <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Will Deacon <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Ingo Molnar <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
kernel/locking/lockdep.c | 4 ++--
lib/debug_locks.c | 2 +-
2 files changed, 3 insertions(+), 3 deletions(-)
--- a/kernel/locking/lockdep.c
+++ b/kernel/locking/lockdep.c
@@ -3808,7 +3808,7 @@ void lock_contended(struct lockdep_map *
{
unsigned long flags;
- if (unlikely(!lock_stat))
+ if (unlikely(!lock_stat || !debug_locks))
return;
if (unlikely(current->lockdep_recursion))
@@ -3828,7 +3828,7 @@ void lock_acquired(struct lockdep_map *l
{
unsigned long flags;
- if (unlikely(!lock_stat))
+ if (unlikely(!lock_stat || !debug_locks))
return;
if (unlikely(current->lockdep_recursion))
--- a/lib/debug_locks.c
+++ b/lib/debug_locks.c
@@ -37,7 +37,7 @@ EXPORT_SYMBOL_GPL(debug_locks_silent);
*/
int debug_locks_off(void)
{
- if (__debug_locks_off()) {
+ if (debug_locks && __debug_locks_off()) {
if (!debug_locks_silent) {
console_verbose();
return 1;
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Sanskriti Sharma <[email protected]>
[ Upstream commit 1e44224fb0528b4c0cc176bde2bb31e9127eb14b ]
For each system in a given pevent, read_event_files() reads in a
temporary 'sys' string. Be sure to free this string before moving onto
to the next system and/or leaving read_event_files().
Fixes the following coverity complaints:
Error: RESOURCE_LEAK (CWE-772):
tools/perf/util/trace-event-read.c:343: overwrite_var: Overwriting
"sys" in "sys = read_string()" leaks the storage that "sys" points to.
tools/perf/util/trace-event-read.c:353: leaked_storage: Variable "sys"
going out of scope leaks the storage it points to.
Signed-off-by: Sanskriti Sharma <[email protected]>
Reviewed-by: Jiri Olsa <[email protected]>
Cc: Joe Lawrence <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
tools/perf/util/trace-event-read.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
--- a/tools/perf/util/trace-event-read.c
+++ b/tools/perf/util/trace-event-read.c
@@ -336,9 +336,12 @@ static int read_event_files(struct peven
for (x=0; x < count; x++) {
size = read8(pevent);
ret = read_event_file(pevent, sys, size);
- if (ret)
+ if (ret) {
+ free(sys);
return ret;
+ }
}
+ free(sys);
}
return 0;
}
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Omar Sandoval <[email protected]>
[ Upstream commit 71327f547ee3a46ec5c39fdbbd268401b2578d0e ]
Move queue allocation next to disk allocation to fix a couple of issues:
- If add_disk() hasn't been called, we should clear disk->queue before
calling put_disk().
- If we fail to allocate a request queue, we still need to put all of
the disks, not just the ones that we allocated queues for.
Signed-off-by: Omar Sandoval <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/block/ataflop.c | 25 +++++++++++++++----------
1 file changed, 15 insertions(+), 10 deletions(-)
--- a/drivers/block/ataflop.c
+++ b/drivers/block/ataflop.c
@@ -1933,6 +1933,11 @@ static int __init atari_floppy_init (voi
unit[i].disk = alloc_disk(1);
if (!unit[i].disk)
goto Enomem;
+
+ unit[i].disk->queue = blk_init_queue(do_fd_request,
+ &ataflop_lock);
+ if (!unit[i].disk->queue)
+ goto Enomem;
}
if (UseTrackbuffer < 0)
@@ -1964,10 +1969,6 @@ static int __init atari_floppy_init (voi
sprintf(unit[i].disk->disk_name, "fd%d", i);
unit[i].disk->fops = &floppy_fops;
unit[i].disk->private_data = &unit[i];
- unit[i].disk->queue = blk_init_queue(do_fd_request,
- &ataflop_lock);
- if (!unit[i].disk->queue)
- goto Enomem;
set_capacity(unit[i].disk, MAX_DISK_SIZE * 2);
add_disk(unit[i].disk);
}
@@ -1982,13 +1983,17 @@ static int __init atari_floppy_init (voi
return 0;
Enomem:
- while (i--) {
- struct request_queue *q = unit[i].disk->queue;
+ do {
+ struct gendisk *disk = unit[i].disk;
- put_disk(unit[i].disk);
- if (q)
- blk_cleanup_queue(q);
- }
+ if (disk) {
+ if (disk->queue) {
+ blk_cleanup_queue(disk->queue);
+ disk->queue = NULL;
+ }
+ put_disk(unit[i].disk);
+ }
+ } while (i--);
unregister_blkdev(FLOPPY_MAJOR, "fd");
return -ENOMEM;
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Martin Willi <[email protected]>
[ Upstream commit a9911937e7d332761e8c4fcbc7ba0426bdc3956f ]
When running in AP mode, ath10k sometimes suffers from TX credit
starvation. The issue is hard to reproduce and shows up once in a
few days, but has been repeatedly seen with QCA9882 and a large
range of firmwares, including 10.2.4.70.67.
Once the module is in this state, TX credits are never replenished,
which results in "SWBA overrun" errors, as no beacons can be sent.
Even worse, WMI commands run in a timeout while holding the conf
mutex for three seconds each, making any further operations slow
and the whole system unresponsive.
The firmware/driver never recovers from that state automatically,
and triggering TX flush or warm restarts won't work over WMI. So
issue a hardware restart if a WMI command times out due to missing
TX credits. This implies a connectivity outage of about 1.4s in AP
mode, but brings back the interface and the whole system to a usable
state. WMI command timeouts have not been seen in absent of this
specific issue, so taking such drastic actions seems legitimate.
Signed-off-by: Martin Willi <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/wireless/ath/ath10k/wmi.c | 6 ++++++
1 file changed, 6 insertions(+)
--- a/drivers/net/wireless/ath/ath10k/wmi.c
+++ b/drivers/net/wireless/ath/ath10k/wmi.c
@@ -751,6 +751,12 @@ int ath10k_wmi_cmd_send(struct ath10k *a
if (ret)
dev_kfree_skb_any(skb);
+ if (ret == -EAGAIN) {
+ ath10k_warn(ar, "wmi command %d timeout, restarting hardware\n",
+ cmd_id);
+ queue_work(ar->workqueue, &ar->restart_work);
+ }
+
return ret;
}
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Masami Hiramatsu <[email protected]>
[ Upstream commit ba0e41ca81b935b958006c7120466e2217357827 ]
Add a testcase to check the syntax and field types for
synthetic_events interface.
Link: http://lkml.kernel.org/r/153986838264.18251.16627517536956299922.stgit@devbox
Acked-by: Shuah Khan <[email protected]>
Signed-off-by: Masami Hiramatsu <[email protected]>
Signed-off-by: Steven Rostedt (VMware) <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
tools/testing/selftests/ftrace/test.d/trigger/inter-event/trigger-synthetic-event-syntax.tc | 80 ++++++++++
1 file changed, 80 insertions(+)
create mode 100644 tools/testing/selftests/ftrace/test.d/trigger/inter-event/trigger-synthetic-event-syntax.tc
--- /dev/null
+++ b/tools/testing/selftests/ftrace/test.d/trigger/inter-event/trigger-synthetic-event-syntax.tc
@@ -0,0 +1,80 @@
+#!/bin/sh
+# SPDX-License-Identifier: GPL-2.0
+# description: event trigger - test synthetic_events syntax parser
+
+do_reset() {
+ reset_trigger
+ echo > set_event
+ clear_trace
+}
+
+fail() { #msg
+ do_reset
+ echo $1
+ exit_fail
+}
+
+if [ ! -f set_event ]; then
+ echo "event tracing is not supported"
+ exit_unsupported
+fi
+
+if [ ! -f synthetic_events ]; then
+ echo "synthetic event is not supported"
+ exit_unsupported
+fi
+
+reset_tracer
+do_reset
+
+echo "Test synthetic_events syntax parser"
+
+echo > synthetic_events
+
+# synthetic event must have a field
+! echo "myevent" >> synthetic_events
+echo "myevent u64 var1" >> synthetic_events
+
+# synthetic event must be found in synthetic_events
+grep "myevent[[:space:]]u64 var1" synthetic_events
+
+# it is not possible to add same name event
+! echo "myevent u64 var2" >> synthetic_events
+
+# Non-append open will cleanup all events and add new one
+echo "myevent u64 var2" > synthetic_events
+
+# multiple fields with different spaces
+echo "myevent u64 var1; u64 var2;" > synthetic_events
+grep "myevent[[:space:]]u64 var1; u64 var2" synthetic_events
+echo "myevent u64 var1 ; u64 var2 ;" > synthetic_events
+grep "myevent[[:space:]]u64 var1; u64 var2" synthetic_events
+echo "myevent u64 var1 ;u64 var2" > synthetic_events
+grep "myevent[[:space:]]u64 var1; u64 var2" synthetic_events
+
+# test field types
+echo "myevent u32 var" > synthetic_events
+echo "myevent u16 var" > synthetic_events
+echo "myevent u8 var" > synthetic_events
+echo "myevent s64 var" > synthetic_events
+echo "myevent s32 var" > synthetic_events
+echo "myevent s16 var" > synthetic_events
+echo "myevent s8 var" > synthetic_events
+
+echo "myevent char var" > synthetic_events
+echo "myevent int var" > synthetic_events
+echo "myevent long var" > synthetic_events
+echo "myevent pid_t var" > synthetic_events
+
+echo "myevent unsigned char var" > synthetic_events
+echo "myevent unsigned int var" > synthetic_events
+echo "myevent unsigned long var" > synthetic_events
+grep "myevent[[:space:]]unsigned long var" synthetic_events
+
+# test string type
+echo "myevent char var[10]" > synthetic_events
+grep "myevent[[:space:]]char\[10\] var" synthetic_events
+
+do_reset
+
+exit 0
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Andreas Kemnade <[email protected]>
commit a007734618fee1bf35556c04fa498d41d42c7301 upstream.
The bus master was not removed after unloading the module
or unbinding the driver. That lead to oopses like this
[ 127.842987] Unable to handle kernel paging request at virtual address bf01d04c
[ 127.850646] pgd = 70e3cd9a
[ 127.853698] [bf01d04c] *pgd=8f908811, *pte=00000000, *ppte=00000000
[ 127.860412] Internal error: Oops: 80000007 [#1] PREEMPT SMP ARM
[ 127.866668] Modules linked in: bq27xxx_battery overlay [last unloaded: omap_hdq]
[ 127.874542] CPU: 0 PID: 1022 Comm: w1_bus_master1 Not tainted 4.19.0-rc4-00001-g2d51da718324 #12
[ 127.883819] Hardware name: Generic OMAP36xx (Flattened Device Tree)
[ 127.890441] PC is at 0xbf01d04c
[ 127.893798] LR is at w1_search_process_cb+0x4c/0xfc
[ 127.898956] pc : [<bf01d04c>] lr : [<c05f9580>] psr: a0070013
[ 127.905609] sp : cf885f48 ip : bf01d04c fp : ddf1e11c
[ 127.911132] r10: cf8fe040 r9 : c05f8d00 r8 : cf8fe040
[ 127.916656] r7 : 000000f0 r6 : cf8fe02c r5 : cf8fe000 r4 : cf8fe01c
[ 127.923553] r3 : c05f8d00 r2 : 000000f0 r1 : cf8fe000 r0 : dde1ef10
[ 127.930450] Flags: NzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none
[ 127.938018] Control: 10c5387d Table: 8f8f0019 DAC: 00000051
[ 127.944091] Process w1_bus_master1 (pid: 1022, stack limit = 0x9135699f)
[ 127.951171] Stack: (0xcf885f48 to 0xcf886000)
[ 127.955810] 5f40: cf8fe000 00000000 cf884000 cf8fe090 000003e8 c05f8d00
[ 127.964477] 5f60: dde5fc34 c05f9700 ddf1e100 ddf1e540 cf884000 cf8fe000 c05f9694 00000000
[ 127.973114] 5f80: dde5fc34 c01499a4 00000000 ddf1e540 c0149874 00000000 00000000 00000000
[ 127.981781] 5fa0: 00000000 00000000 00000000 c01010e8 00000000 00000000 00000000 00000000
[ 127.990447] 5fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 127.999114] 5fe0: 00000000 00000000 00000000 00000000 00000013 00000000 00000000 00000000
[ 128.007781] [<c05f9580>] (w1_search_process_cb) from [<c05f9700>] (w1_process+0x6c/0x118)
[ 128.016479] [<c05f9700>] (w1_process) from [<c01499a4>] (kthread+0x130/0x148)
[ 128.024047] [<c01499a4>] (kthread) from [<c01010e8>] (ret_from_fork+0x14/0x2c)
[ 128.031677] Exception stack(0xcf885fb0 to 0xcf885ff8)
[ 128.037017] 5fa0: 00000000 00000000 00000000 00000000
[ 128.045684] 5fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 128.054351] 5fe0: 00000000 00000000 00000000 00000000 00000013 00000000
[ 128.061340] Code: bad PC value
[ 128.064697] ---[ end trace af066e33c0e14119 ]---
Cc: <[email protected]>
Signed-off-by: Andreas Kemnade <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/w1/masters/omap_hdq.c | 2 ++
1 file changed, 2 insertions(+)
--- a/drivers/w1/masters/omap_hdq.c
+++ b/drivers/w1/masters/omap_hdq.c
@@ -622,6 +622,8 @@ static int omap_hdq_remove(struct platfo
/* remove module dependency */
pm_runtime_disable(&pdev->dev);
+ w1_remove_master_device(&omap_w1_master);
+
return 0;
}
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Theodore Ts'o <[email protected]>
commit 9e463084cdb22e0b56b2dfbc50461020409a5fd3 upstream.
Fixes: bfe0a5f47ada ("ext4: add more mount time checks of the superblock")
Reported-by: Vasily Averin <[email protected]>
Signed-off-by: Theodore Ts'o <[email protected]>
Cc: [email protected] # 4.18
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/ext4/super.c | 16 ++++++++--------
1 file changed, 8 insertions(+), 8 deletions(-)
--- a/fs/ext4/super.c
+++ b/fs/ext4/super.c
@@ -3976,6 +3976,14 @@ static int ext4_fill_super(struct super_
sbi->s_groups_count = blocks_count;
sbi->s_blockfile_groups = min_t(ext4_group_t, sbi->s_groups_count,
(EXT4_MAX_BLOCK_FILE_PHYS / EXT4_BLOCKS_PER_GROUP(sb)));
+ if (((u64)sbi->s_groups_count * sbi->s_inodes_per_group) !=
+ le32_to_cpu(es->s_inodes_count)) {
+ ext4_msg(sb, KERN_ERR, "inodes count not valid: %u vs %llu",
+ le32_to_cpu(es->s_inodes_count),
+ ((u64)sbi->s_groups_count * sbi->s_inodes_per_group));
+ ret = -EINVAL;
+ goto failed_mount;
+ }
db_count = (sbi->s_groups_count + EXT4_DESC_PER_BLOCK(sb) - 1) /
EXT4_DESC_PER_BLOCK(sb);
if (EXT4_HAS_INCOMPAT_FEATURE(sb, EXT4_FEATURE_INCOMPAT_META_BG)) {
@@ -3995,14 +4003,6 @@ static int ext4_fill_super(struct super_
ret = -ENOMEM;
goto failed_mount;
}
- if (((u64)sbi->s_groups_count * sbi->s_inodes_per_group) !=
- le32_to_cpu(es->s_inodes_count)) {
- ext4_msg(sb, KERN_ERR, "inodes count not valid: %u vs %llu",
- le32_to_cpu(es->s_inodes_count),
- ((u64)sbi->s_groups_count * sbi->s_inodes_per_group));
- ret = -EINVAL;
- goto failed_mount;
- }
if (ext4_proc_root)
sbi->s_proc = proc_mkdir(sb->s_id, ext4_proc_root);
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Alex Stanoev <[email protected]>
commit ac237c28d5ac1b241d58b1b7b4b9fa10efb22fb5 upstream.
The Creative Audigy SE (SB0570) card currently exhibits an audible pop
whenever playback is stopped or resumed, or during silent periods of an
audio stream. Initialise the IZD bit to the 0 to eliminate these pops.
The Infinite Zero Detection (IZD) feature on the DAC causes the output
to be shunted to Vcap after 2048 samples of silence. This discharges the
AC coupling capacitor through the output and causes the aforementioned
pop/click noise.
The behaviour of the IZD bit is described on page 15 of the WM8768GEDS
datasheet: "With IZD=1, applying MUTE for 1024 consecutive input samples
will cause all outputs to be connected directly to VCAP. This also
happens if 2048 consecutive zero input samples are applied to all 6
channels, and IZD=0. It will be removed as soon as any channel receives
a non-zero input". I believe the second sentence might be referring to
IZD=1 instead of IZD=0 given the observed behaviour of the card.
This change should make the DAC initialisation consistent with
Creative's Windows driver, as this popping persists when initialising
the card in Linux and soft rebooting into Windows, but is not present on
a cold boot to Windows.
Signed-off-by: Alex Stanoev <[email protected]>
Cc: <[email protected]>
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
sound/pci/ca0106/ca0106.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/sound/pci/ca0106/ca0106.h
+++ b/sound/pci/ca0106/ca0106.h
@@ -582,7 +582,7 @@
#define SPI_PL_BIT_R_R (2<<7) /* right channel = right */
#define SPI_PL_BIT_R_C (3<<7) /* right channel = (L+R)/2 */
#define SPI_IZD_REG 2
-#define SPI_IZD_BIT (1<<4) /* infinite zero detect */
+#define SPI_IZD_BIT (0<<4) /* infinite zero detect */
#define SPI_FMT_REG 3
#define SPI_FMT_BIT_RJ (0<<0) /* right justified mode */
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: "David S. Miller" <[email protected]>
[ Upstream commit cfdc3170d214046b9509183fe9b9544dc644d40b ]
It is important to clear the hw->state value for non-stopped events
when they are added into the PMU. Otherwise when the event is
scheduled out, we won't read the counter because HES_UPTODATE is still
set. This breaks 'perf stat' and similar use cases, causing all the
events to show zero.
This worked for multi-pcr because we make explicit sparc_pmu_start()
calls in calculate_multiple_pcrs(). calculate_single_pcr() doesn't do
this because the idea there is to accumulate all of the counter
settings into the single pcr value. So we have to add explicit
hw->state handling there.
Like x86, we use the PERF_HES_ARCH bit to track truly stopped events
so that we don't accidently start them on a reload.
Related to all of this, sparc_pmu_start() is missing a userpage update
so add it.
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/sparc/kernel/perf_event.c | 17 +++++++++++++----
1 file changed, 13 insertions(+), 4 deletions(-)
--- a/arch/sparc/kernel/perf_event.c
+++ b/arch/sparc/kernel/perf_event.c
@@ -919,6 +919,8 @@ static void read_in_all_counters(struct
sparc_perf_event_update(cp, &cp->hw,
cpuc->current_idx[i]);
cpuc->current_idx[i] = PIC_NO_INDEX;
+ if (cp->hw.state & PERF_HES_STOPPED)
+ cp->hw.state |= PERF_HES_ARCH;
}
}
}
@@ -951,10 +953,12 @@ static void calculate_single_pcr(struct
enc = perf_event_get_enc(cpuc->events[i]);
cpuc->pcr[0] &= ~mask_for_index(idx);
- if (hwc->state & PERF_HES_STOPPED)
+ if (hwc->state & PERF_HES_ARCH) {
cpuc->pcr[0] |= nop_for_index(idx);
- else
+ } else {
cpuc->pcr[0] |= event_encoding(enc, idx);
+ hwc->state = 0;
+ }
}
out:
cpuc->pcr[0] |= cpuc->event[0]->hw.config_base;
@@ -980,6 +984,9 @@ static void calculate_multiple_pcrs(stru
cpuc->current_idx[i] = idx;
+ if (cp->hw.state & PERF_HES_ARCH)
+ continue;
+
sparc_pmu_start(cp, PERF_EF_RELOAD);
}
out:
@@ -1071,6 +1078,8 @@ static void sparc_pmu_start(struct perf_
event->hw.state = 0;
sparc_pmu_enable_event(cpuc, &event->hw, idx);
+
+ perf_event_update_userpage(event);
}
static void sparc_pmu_stop(struct perf_event *event, int flags)
@@ -1363,9 +1372,9 @@ static int sparc_pmu_add(struct perf_eve
cpuc->events[n0] = event->hw.event_base;
cpuc->current_idx[n0] = PIC_NO_INDEX;
- event->hw.state = PERF_HES_UPTODATE;
+ event->hw.state = PERF_HES_UPTODATE | PERF_HES_STOPPED;
if (!(ef_flags & PERF_EF_START))
- event->hw.state |= PERF_HES_STOPPED;
+ event->hw.state |= PERF_HES_ARCH;
/*
* If group events scheduling transaction was started,
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Ben Hutchings <[email protected]>
[ Upstream commit 9c1442a9d039a1a3302fa93e9a11001c5f23b624 ]
We currently align the end of the compressed image to a multiple of
16. However, the PE-COFF header included in the EFI stub says that
the file alignment is 32 bytes, and when adding an EFI signature to
the file it must first be padded to this alignment.
sbsigntool commands warn about this:
warning: file-aligned section .text extends beyond end of file
warning: checksum areas are greater than image size. Invalid section table?
Worse, pesign -at least when creating a detached signature- uses the
hash of the unpadded file, resulting in an invalid signature if
padding is required.
Avoid both these problems by increasing alignment to 32 bytes when
CONFIG_EFI_STUB is enabled.
Signed-off-by: Ben Hutchings <[email protected]>
Signed-off-by: Ard Biesheuvel <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/boot/tools/build.c | 7 +++++++
1 file changed, 7 insertions(+)
--- a/arch/x86/boot/tools/build.c
+++ b/arch/x86/boot/tools/build.c
@@ -391,6 +391,13 @@ int main(int argc, char ** argv)
die("Unable to mmap '%s': %m", argv[2]);
/* Number of 16-byte paragraphs, including space for a 4-byte CRC */
sys_size = (sz + 15 + 4) / 16;
+#ifdef CONFIG_EFI_STUB
+ /*
+ * COFF requires minimum 32-byte alignment of sections, and
+ * adding a signature is problematic without that alignment.
+ */
+ sys_size = (sys_size + 1) & ~1;
+#endif
/* Patch the setup code with the appropriate size parameters */
buf[0x1f1] = setup_sectors-1;
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Mauro Carvalho Chehab <[email protected]>
commit 15644bfa195bd166d0a5ed76ae2d587f719c3dac upstream.
Instead of using a register value, use an AMUX name, as otherwise
VIDIOC_G_AUDIO would fail.
Cc: [email protected]
Fixes: 766ed64de554 ("V4L/DVB (11827): Add support for Terratec Grabster AV350")
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/media/usb/em28xx/em28xx-cards.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/drivers/media/usb/em28xx/em28xx-cards.c
+++ b/drivers/media/usb/em28xx/em28xx-cards.c
@@ -2001,13 +2001,13 @@ struct em28xx_board em28xx_boards[] = {
.input = { {
.type = EM28XX_VMUX_COMPOSITE1,
.vmux = TVP5150_COMPOSITE1,
- .amux = EM28XX_AUDIO_SRC_LINE,
+ .amux = EM28XX_AMUX_LINE_IN,
.gpio = terratec_av350_unmute_gpio,
}, {
.type = EM28XX_VMUX_SVIDEO,
.vmux = TVP5150_SVIDEO,
- .amux = EM28XX_AUDIO_SRC_LINE,
+ .amux = EM28XX_AMUX_LINE_IN,
.gpio = terratec_av350_unmute_gpio,
} },
},
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Frank Sorenson <[email protected]>
commit 5d7a5bcb67c70cbc904057ef52d3fcfeb24420bb upstream.
When truncating the encode buffer, the page_ptr is getting
advanced, causing the next page to be skipped while encoding.
The page is still included in the response, so the response
contains a page of bogus data.
We need to adjust the page_ptr backwards to ensure we encode
the next page into the correct place.
We saw this triggered when concurrent directory modifications caused
nfsd4_encode_direct_fattr() to return nfserr_noent, and the resulting
call to xdr_truncate_encode() corrupted the READDIR reply.
Signed-off-by: Frank Sorenson <[email protected]>
Cc: [email protected]
Signed-off-by: J. Bruce Fields <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/sunrpc/xdr.c | 5 ++---
1 file changed, 2 insertions(+), 3 deletions(-)
--- a/net/sunrpc/xdr.c
+++ b/net/sunrpc/xdr.c
@@ -638,11 +638,10 @@ void xdr_truncate_encode(struct xdr_stre
/* xdr->iov should already be NULL */
return;
}
- if (fraglen) {
+ if (fraglen)
xdr->end = head->iov_base + head->iov_len;
- xdr->page_ptr--;
- }
/* (otherwise assume xdr->end is already set) */
+ xdr->page_ptr--;
head->iov_len = len;
buf->len = len;
xdr->p = head->iov_base + head->iov_len;
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Steve French <[email protected]>
commit 2c887635cd6ab3af619dc2be94e5bf8f2e172b78 upstream.
Currently, "echo 0 > /proc/fs/cifs/Stats" resets all of the stats
except the session and share reconnect counts. Fix it to
reset those as well.
CC: Stable <[email protected]>
Signed-off-by: Steve French <[email protected]>
Reviewed-by: Aurelien Aptel <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/cifs/cifs_debug.c | 3 +++
1 file changed, 3 insertions(+)
--- a/fs/cifs/cifs_debug.c
+++ b/fs/cifs/cifs_debug.c
@@ -271,6 +271,9 @@ static ssize_t cifs_stats_proc_write(str
atomic_set(&totBufAllocCount, 0);
atomic_set(&totSmBufAllocCount, 0);
#endif /* CONFIG_CIFS_STATS2 */
+ atomic_set(&tcpSesReconnectCount, 0);
+ atomic_set(&tconInfoReconnectCount, 0);
+
spin_lock(&GlobalMid_Lock);
GlobalMaxActiveXid = 0;
GlobalCurrentXid = 0;
3.18-stable review patch. If anyone has any objections, please let me know.
------------------
From: Mauro Carvalho Chehab <[email protected]>
commit afeaade90db4c5dab93f326d9582be1d5954a198 upstream.
The v4l2-compliance tool complains if a video doesn't start
with a zero sequence number.
While this shouldn't cause any real problem for apps, let's
make it happier, in order to better check the v4l2-compliance
differences before and after patchsets.
This is actually an old issue. It is there since at least its
videobuf2 conversion, e. g. changeset 3829fadc461 ("[media]
em28xx: convert to videobuf2"), if VB1 wouldn't suffer from
the same issue.
Cc: [email protected]
Fixes: d3829fadc461 ("[media] em28xx: convert to videobuf2")
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/media/usb/em28xx/em28xx-video.c | 2 ++
1 file changed, 2 insertions(+)
--- a/drivers/media/usb/em28xx/em28xx-video.c
+++ b/drivers/media/usb/em28xx/em28xx-video.c
@@ -1141,6 +1141,8 @@ static void em28xx_ctrl_notify(struct v4
{
struct em28xx *dev = priv;
+ dev->v4l2->field_count = 0;
+
/*
* In the case of non-AC97 volume controls, we still need
* to do some setups at em28xx, in order to mute/unmute
On 11/19/18 9:28 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 3.18.126 release.
> There are 90 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed Nov 21 16:25:28 UTC 2018.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v3.x/stable-review/patch-3.18.126-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-3.18.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
>
Compiled and booted ob my test system. No dmesg regressions.
thanks,
-- Shuah
On Mon, Nov 19, 2018 at 05:09:38PM -0700, shuah wrote:
> On 11/19/18 9:28 AM, Greg Kroah-Hartman wrote:
> > This is the start of the stable review cycle for the 3.18.126 release.
> > There are 90 patches in this series, all will be posted as a response
> > to this one. If anyone has any issues with these being applied, please
> > let me know.
> >
> > Responses should be made by Wed Nov 21 16:25:28 UTC 2018.
> > Anything received after that time might be too late.
> >
> > The whole patch series can be found in one patch at:
> > https://www.kernel.org/pub/linux/kernel/v3.x/stable-review/patch-3.18.126-rc1.gz
> > or in the git tree and branch at:
> > git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-3.18.y
> > and the diffstat can be found below.
> >
> > thanks,
> >
> > greg k-h
> >
>
> Compiled and booted ob my test system. No dmesg regressions.
Thanks for testing all of these and letting me know.
greg k-h
On Mon, Nov 19, 2018 at 01:11:54PM -0500, Prarit Bhargava wrote:
>
>
> On 11/19/2018 11:28 AM, Greg Kroah-Hartman wrote:
> > 3.18-stable review patch. If anyone has any objections, please let me know.
> >
> > ------------------
> >
> > From: Prarit Bhargava <[email protected]>
> >
> > [ Upstream commit f69ffc5d3db8f1f03fd6d1df5930f9a1fbd787b6 ]
>
> Greg, as previously mentioned to Sasha, this patch also needs 8c22e2f69592
> ("cpupower: Fix AMD Family 0x17 msr_pstate size"). I did not see a message
> indicating that 8c22e2f69592 was also being backported to 3.18-stable. My
> apologies if I missed it.
I've just dropped this from the 3.18 queue as it seems to have been
skipped for 4.9 and 4.4 as well.
thanks,
greg k-h
On 19 November 2018 9:58:42 PM IST, Greg Kroah-Hartman <[email protected]> wrote:
>This is the start of the stable review cycle for the 3.18.126 release.
>There are 90 patches in this series, all will be posted as a response
>to this one. If anyone has any issues with these being applied, please
>let me know.
>
>Responses should be made by Wed Nov 21 16:25:28 UTC 2018.
>Anything received after that time might be too late.
>
>The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v3.x/stable-review/patch-3.18.126-rc1.gz
>or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
>linux-3.18.y
>and the diffstat can be found below.
>
>thanks,
>
>greg k-h
Peachy as always on the OnePlus 3(T).
P.S. Not tired of this old-ass tree yet? :P
--
Harsh Shandilya
PRJKT Development LLC
On Tue, Nov 20, 2018 at 04:09:05PM +0530, Harsh Shandilya wrote:
> On 19 November 2018 9:58:42 PM IST, Greg Kroah-Hartman <[email protected]> wrote:
> >This is the start of the stable review cycle for the 3.18.126 release.
> >There are 90 patches in this series, all will be posted as a response
> >to this one. If anyone has any issues with these being applied, please
> >let me know.
> >
> >Responses should be made by Wed Nov 21 16:25:28 UTC 2018.
> >Anything received after that time might be too late.
> >
> >The whole patch series can be found in one patch at:
> > https://www.kernel.org/pub/linux/kernel/v3.x/stable-review/patch-3.18.126-rc1.gz
> >or in the git tree and branch at:
> > git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
> >linux-3.18.y
> >and the diffstat can be found below.
> >
> >thanks,
> >
> >greg k-h
> Peachy as always on the OnePlus 3(T).
>
> P.S. Not tired of this old-ass tree yet? :P
I am very tired of it, but it turns out lots of people still depend on
it, so I'll keep it around for a while longer :(
thanks for testing,
greg k-h
On Mon, Nov 19, 2018 at 05:28:42PM +0100, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 3.18.126 release.
> There are 90 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed Nov 21 16:25:28 UTC 2018.
> Anything received after that time might be too late.
>
[preliminary]
Build results:
total: 138 pass: 134 fail: 4
Failed builds:
i386:allyesconfig
i386:allmodconfig
sparc64:allmodconfig
sparc64:defconfig
arch/x86/platform/olpc/olpc-xo1-rtc.c: In function ‘xo1_rtc_init’:
arch/x86/platform/olpc/olpc-xo1-rtc.c:79:14: error:
‘struct x86_platform_ops’ has no member named ‘legacy’
arch/sparc/kernel/perf_event.c:26:31: fatal error:
linux/sched/clock.h: No such file or directory
Guenter
On Tue, Nov 20, 2018 at 08:18:57PM +0530, Harsh Shandilya wrote:
> On 20 November 2018 4:46:13 PM IST, Greg Kroah-Hartman <[email protected]> wrote:
> >On Tue, Nov 20, 2018 at 04:09:05PM +0530, Harsh Shandilya wrote:
> >> On 19 November 2018 9:58:42 PM IST, Greg Kroah-Hartman
> ><[email protected]> wrote:
> >> >This is the start of the stable review cycle for the 3.18.126
> >release.
> >> >There are 90 patches in this series, all will be posted as a
> >response
> >> >to this one. If anyone has any issues with these being applied,
> >please
> >> >let me know.
> >> >
> >> >Responses should be made by Wed Nov 21 16:25:28 UTC 2018.
> >> >Anything received after that time might be too late.
> >> >
> >> >The whole patch series can be found in one patch at:
> >>
> >> https://www.kernel.org/pub/linux/kernel/v3.x/stable-review/patch-3.18.126-rc1.gz
> >> >or in the git tree and branch at:
> >>
> >> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
> >> >linux-3.18.y
> >> >and the diffstat can be found below.
> >> >
> >> >thanks,
> >> >
> >> >greg k-h
> >> Peachy as always on the OnePlus 3(T).
> >>
> >> P.S. Not tired of this old-ass tree yet? :P
> >
> >I am very tired of it, but it turns out lots of people still depend on
> >it, so I'll keep it around for a while longer :(
> >
> >thanks for testing,
> >
> >greg k-h
>
> That's just sad. Anybody using this outside Android?
Not that I know of. And really, they better not be, as it is NOT a
kernel one should use anywhere else at this point in time...
thanks,
greg k-h
On Mon, Nov 19, 2018 at 05:28:42PM +0100, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 3.18.126 release.
> There are 90 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed Nov 21 16:25:28 UTC 2018.
> Anything received after that time might be too late.
>
Build results:
total: 138 pass: 134 fail: 4
Failed builds:
i386:allyesconfig
i386:allmodconfig
sparc64:allmodconfig
sparc64:defconfig
Qemu test results:
total: 221 pass: 209 fail: 12
Failed tests:
sparc64:sun4u:smp:initrd
sparc64:sun4u:smp:ata:rootfs
sparc64:sun4u:smp:mmc:rootfs
sparc64:sun4u:smp:nvme:rootfs
sparc64:sun4u:smp:scsi[MEGASAS]:rootfs
sparc64:sun4u:smp:usb-xhci:rootfs
sparc64:sun4u:smp:usb-uas-xhci:rootfs
sparc64:sun4u:smp:virtio-pci:rootfs
sparc64:sun4v:smp:ata:rootfs
sparc64:sun4v:smp:nvme:rootfs
sparc64:sun4u:nosmp:ata:rootfs
sparc64:sun4v:nosmp:ata:rootfs
Details are available at https://kerneltests.org/builders/.
Guenter
On Tue, Nov 20, 2018 at 12:38:29PM -0800, Guenter Roeck wrote:
> On Mon, Nov 19, 2018 at 05:28:42PM +0100, Greg Kroah-Hartman wrote:
> > This is the start of the stable review cycle for the 3.18.126 release.
> > There are 90 patches in this series, all will be posted as a response
> > to this one. If anyone has any issues with these being applied, please
> > let me know.
> >
> > Responses should be made by Wed Nov 21 16:25:28 UTC 2018.
> > Anything received after that time might be too late.
> >
>
> Build results:
> total: 138 pass: 134 fail: 4
> Failed builds:
> i386:allyesconfig
> i386:allmodconfig
> sparc64:allmodconfig
> sparc64:defconfig
> Qemu test results:
> total: 221 pass: 209 fail: 12
> Failed tests:
> sparc64:sun4u:smp:initrd
> sparc64:sun4u:smp:ata:rootfs
> sparc64:sun4u:smp:mmc:rootfs
> sparc64:sun4u:smp:nvme:rootfs
> sparc64:sun4u:smp:scsi[MEGASAS]:rootfs
> sparc64:sun4u:smp:usb-xhci:rootfs
> sparc64:sun4u:smp:usb-uas-xhci:rootfs
> sparc64:sun4u:smp:virtio-pci:rootfs
> sparc64:sun4v:smp:ata:rootfs
> sparc64:sun4v:smp:nvme:rootfs
> sparc64:sun4u:nosmp:ata:rootfs
> sparc64:sun4v:nosmp:ata:rootfs
>
> Details are available at https://kerneltests.org/builders/.
Ok, sorry about that, I think these should now all be fixed. I've
pushed out a -rc2 with some changes.
thanks,
greg k-h
On Wed, Nov 21, 2018 at 11:37:33AM +0100, Greg Kroah-Hartman wrote:
> On Tue, Nov 20, 2018 at 12:38:29PM -0800, Guenter Roeck wrote:
> > On Mon, Nov 19, 2018 at 05:28:42PM +0100, Greg Kroah-Hartman wrote:
> > > This is the start of the stable review cycle for the 3.18.126 release.
> > > There are 90 patches in this series, all will be posted as a response
> > > to this one. If anyone has any issues with these being applied, please
> > > let me know.
> > >
> > > Responses should be made by Wed Nov 21 16:25:28 UTC 2018.
> > > Anything received after that time might be too late.
> > >
> >
> > Build results:
> > total: 138 pass: 134 fail: 4
> > Failed builds:
> > i386:allyesconfig
> > i386:allmodconfig
> > sparc64:allmodconfig
> > sparc64:defconfig
> > Qemu test results:
> > total: 221 pass: 209 fail: 12
> > Failed tests:
> > sparc64:sun4u:smp:initrd
> > sparc64:sun4u:smp:ata:rootfs
> > sparc64:sun4u:smp:mmc:rootfs
> > sparc64:sun4u:smp:nvme:rootfs
> > sparc64:sun4u:smp:scsi[MEGASAS]:rootfs
> > sparc64:sun4u:smp:usb-xhci:rootfs
> > sparc64:sun4u:smp:usb-uas-xhci:rootfs
> > sparc64:sun4u:smp:virtio-pci:rootfs
> > sparc64:sun4v:smp:ata:rootfs
> > sparc64:sun4v:smp:nvme:rootfs
> > sparc64:sun4u:nosmp:ata:rootfs
> > sparc64:sun4v:nosmp:ata:rootfs
> >
> > Details are available at https://kerneltests.org/builders/.
>
> Ok, sorry about that, I think these should now all be fixed. I've
> pushed out a -rc2 with some changes.
>
For v3.18.125-88-ge2a8617f7c3c:
Build results:
total: 138 pass: 138 fail: 0
Qemu test results:
total: 221 pass: 221 fail: 0
Guenter
On Wed, Nov 21, 2018 at 03:40:12PM -0800, Guenter Roeck wrote:
> On Wed, Nov 21, 2018 at 11:37:33AM +0100, Greg Kroah-Hartman wrote:
> > On Tue, Nov 20, 2018 at 12:38:29PM -0800, Guenter Roeck wrote:
> > > On Mon, Nov 19, 2018 at 05:28:42PM +0100, Greg Kroah-Hartman wrote:
> > > > This is the start of the stable review cycle for the 3.18.126 release.
> > > > There are 90 patches in this series, all will be posted as a response
> > > > to this one. If anyone has any issues with these being applied, please
> > > > let me know.
> > > >
> > > > Responses should be made by Wed Nov 21 16:25:28 UTC 2018.
> > > > Anything received after that time might be too late.
> > > >
> > >
> > > Build results:
> > > total: 138 pass: 134 fail: 4
> > > Failed builds:
> > > i386:allyesconfig
> > > i386:allmodconfig
> > > sparc64:allmodconfig
> > > sparc64:defconfig
> > > Qemu test results:
> > > total: 221 pass: 209 fail: 12
> > > Failed tests:
> > > sparc64:sun4u:smp:initrd
> > > sparc64:sun4u:smp:ata:rootfs
> > > sparc64:sun4u:smp:mmc:rootfs
> > > sparc64:sun4u:smp:nvme:rootfs
> > > sparc64:sun4u:smp:scsi[MEGASAS]:rootfs
> > > sparc64:sun4u:smp:usb-xhci:rootfs
> > > sparc64:sun4u:smp:usb-uas-xhci:rootfs
> > > sparc64:sun4u:smp:virtio-pci:rootfs
> > > sparc64:sun4v:smp:ata:rootfs
> > > sparc64:sun4v:smp:nvme:rootfs
> > > sparc64:sun4u:nosmp:ata:rootfs
> > > sparc64:sun4v:nosmp:ata:rootfs
> > >
> > > Details are available at https://kerneltests.org/builders/.
> >
> > Ok, sorry about that, I think these should now all be fixed. I've
> > pushed out a -rc2 with some changes.
> >
>
> For v3.18.125-88-ge2a8617f7c3c:
>
> Build results:
> total: 138 pass: 138 fail: 0
> Qemu test results:
> total: 221 pass: 221 fail: 0
Wonderful, thanks for letting me know!
greg k-h