HiSilicon SoC has a separate System Control Processor(SCP) dedicated for
clock frequency adjustment and has been using the cpufreq driver
'cppc-cpufreq'. New HiSilicon SoC HIP09 add support for CPU Boost, but
ACPI CPPC doesn't support this. In HiSilicon SoC HIP09, each core has
its own clock domain. It is better for the core itself to adjust its
frequency when we require fast response. In this patch, we add a
separate cpufreq driver for HiSilicon SoC HIP09.
We add a new communication interface based on shared memory between OS
and SCP. OS tell SCP the desired frequency through the shared memory.
SCP loops the shared memory and change the frequency when the value in
the shared memory changed. We use '_DSD' method to get shared memory
address and doorbell register address from UEFI. A example of '_DSD'
method is as below.
Device (C002)
{
Name (_HID, "ACPI0007" /* Processor Device */) // _HID: Hardware ID
Name (_UID, 0x02) // _UID: Unique ID
Name (_DSD, Package () {
ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
Package () {
Package () {"cpufreq_method", 2},
Package () {"shm_base_addr", 0x0000xxxx},
Package () {"shm_size", xx},
Package () {"doorbell_addr", 0x0000xxxx},
Package () {"doorbell_val", 0xxx},
Package () {"transition delay", xxxxxxxx},
}
})
}
An alternative method is to resue PCCT table to report the shared memory
address and doorbell register address. But we needs to redefine the
registers layout of the shared memory, different from '_CPC', and I don't
know whether it complies with the spec.
I also figure out another way to add CPU Boost for CPPC. I notice the
difference when we describe 'Highest Performance' and 'Nominal
Performance' in the spec.
Highest Performance: the absolute maximum performance an individual
processor may reach. This performance level may not be sustainable for
long durations, and may only be achievable if other platform components
are in a specific state; for example, it may require other processors be
in an idle state.
Nominal Performance: the maximum sustained performance level of the
processor. This is the performance level the platform is expected to be
able to maintain continuously. All processors are expected to be able to
sustain their nominal performance state simultaneously.
The current CPPC code does not support CPU BOOST and use 'Highest
Performance' as the maximum performance the CPU can achieve. I think
maybe we can use 'Highest Performance Register' to record the maximum
performance CPU can achieve in Boost Mode, and 'Nominal Performance
Register' to record the maximum performance in Non-Boost Mode. But this
needs modifying the UEFI, and we need to firgure out a way to modify
CPPC driver without influencing the machines using the old UEFI.
When the number of clock domain become enormous, such as hundreds of
cores each has its own clock domain, it will take almost one millisecond
for the SCP to finish frequency adjustment for all the cores. Especially
when turbo calculation is involved, the time will be longer. SCP needs
to calculate how much the clock frequency can boost for each core. So it
is better for each core to adjust its own frequency. But it is not safe
for OS to write frequency adjustment registers directly when CPU Boost is
supported. So we add a new SoC implementation-specific(SiP) Service Call
for this situation.
Signed-off-by: Xiongfeng Wang <[email protected]>
---
drivers/cpufreq/Kconfig.arm | 7 +
drivers/cpufreq/Makefile | 1 +
drivers/cpufreq/hisi-cpufreq.c | 334 +++++++++++++++++++++++++++++++++++++++++
3 files changed, 342 insertions(+)
create mode 100644 drivers/cpufreq/hisi-cpufreq.c
diff --git a/drivers/cpufreq/Kconfig.arm b/drivers/cpufreq/Kconfig.arm
index 15c1a12..119310e 100644
--- a/drivers/cpufreq/Kconfig.arm
+++ b/drivers/cpufreq/Kconfig.arm
@@ -89,6 +89,13 @@ config ARM_HIGHBANK_CPUFREQ
If in doubt, say N.
+config ARM_HISILICON_CPUFREQ
+ tristate "HiSilicon SoC CPUFreq driver"
+ depends on ACPI_PROCESSOR
+ default m
+ help
+ This adds the CPUFreq driver for HiSilicon SoC.
+
config ARM_IMX6Q_CPUFREQ
tristate "Freescale i.MX6 cpufreq support"
depends on ARCH_MXC
diff --git a/drivers/cpufreq/Makefile b/drivers/cpufreq/Makefile
index f6670c4..0fa8668 100644
--- a/drivers/cpufreq/Makefile
+++ b/drivers/cpufreq/Makefile
@@ -53,6 +53,7 @@ obj-$(CONFIG_ARM_BRCMSTB_AVS_CPUFREQ) += brcmstb-avs-cpufreq.o
obj-$(CONFIG_ACPI_CPPC_CPUFREQ) += cppc_cpufreq.o
obj-$(CONFIG_ARCH_DAVINCI) += davinci-cpufreq.o
obj-$(CONFIG_ARM_HIGHBANK_CPUFREQ) += highbank-cpufreq.o
+obj-$(CONFIG_ARM_HISILICON_CPUFREQ) += hisi-cpufreq.o
obj-$(CONFIG_ARM_IMX6Q_CPUFREQ) += imx6q-cpufreq.o
obj-$(CONFIG_ARM_IMX_CPUFREQ_DT) += imx-cpufreq-dt.o
obj-$(CONFIG_ARM_KIRKWOOD_CPUFREQ) += kirkwood-cpufreq.o
diff --git a/drivers/cpufreq/hisi-cpufreq.c b/drivers/cpufreq/hisi-cpufreq.c
new file mode 100644
index 0000000..3fda10f
--- /dev/null
+++ b/drivers/cpufreq/hisi-cpufreq.c
@@ -0,0 +1,334 @@
+// SPDX-License-Identifier: GPL-2.0
+/* Copyright (c) 2020 Hisilicon Limited. */
+
+#include <asm/arch_timer.h>
+#include <linux/acpi.h>
+#include <linux/arm-smccc.h>
+#include <linux/cpu.h>
+#include <linux/cpufeature.h>
+#include <linux/cpufreq.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/module.h>
+
+#define HISILICON_SIP_SMC_FAST_CALL_VAL(func_num) \
+ ARM_SMCCC_CALL_VAL(ARM_SMCCC_FAST_CALL, ARM_SMCCC_SMC_64, \
+ ARM_SMCCC_OWNER_SIP, (func_num))
+
+#define HISILICON_SIP_SMC_FUNCID_SET_CPUFREQ 1
+#define HISILICON_SIP_SMC_SET_CPUFREQ \
+ HISILICON_SIP_SMC_FAST_CALL_VAL(HISILICON_SIP_SMC_FUNCID_SET_CPUFREQ)
+
+#define HISI_CPUFREQ_METHOD_SMC 1
+/*
+ * OS stores the desired frequency in shared memory. Platform loops the
+ * shared memory.
+ */
+#define HISI_CPUFREQ_METHOD_SHM 2
+/*
+ * OS stores the desired frequency in shared memory and use a doorbell
+ * interrupt to notify the platform.
+ */
+#define HISI_CPUFREQ_METHOD_NOTIFY 3
+
+struct hisi_cpufreq_shm {
+ u64 max_freq;
+ u64 min_freq;
+ u64 turbo_freq;
+ u64 target_freq;
+ u32 clock_domain;
+};
+
+struct hisi_cpufreq_cpudata {
+ u64 max_freq;
+ u64 min_freq;
+ u64 turbo_freq;
+ cpumask_t shared_cpus;
+ void __iomem *doorbell_addr;
+ u32 doorbell_val;
+ u32 transition_delay;
+};
+
+unsigned int hisi_cpufreq_method;
+static DEFINE_PER_CPU(struct hisi_cpufreq_shm *, cpufreq_shm_data);
+static struct hisi_cpufreq_cpudata *cpufreq_cpudata;
+
+static unsigned long hisi_smc_set_freq(unsigned long target_freq)
+{
+ struct arm_smccc_res res;
+
+ arm_smccc_smc(HISILICON_SIP_SMC_SET_CPUFREQ, target_freq,
+ 0, 0, 0, 0, 0, 0, &res);
+
+ return res.a0;
+}
+
+static unsigned int hisi_shm_set_freq(unsigned int cpu,
+ unsigned long target_freq,
+ bool knock_doorbell)
+{
+ struct hisi_cpufreq_cpudata *cpudata = &cpufreq_cpudata[cpu];
+
+ per_cpu(cpufreq_shm_data, cpu)->target_freq = target_freq;
+
+ if (knock_doorbell)
+ writel(cpudata->doorbell_val, cpudata->doorbell_addr);
+
+ return 0;
+}
+
+static unsigned int hisi_cpufreq_set_freq(unsigned int cpu,
+ unsigned int target_freq)
+{
+ if (hisi_cpufreq_method == HISI_CPUFREQ_METHOD_SMC)
+ /*
+ * The caller CPU is also the CPU which needs frequency
+ * adjustment.
+ */
+ return hisi_smc_set_freq(target_freq);
+ else
+ return hisi_shm_set_freq(cpu, target_freq,
+ hisi_cpufreq_method ==
+ HISI_CPUFREQ_METHOD_NOTIFY);
+}
+
+static unsigned int hisi_cpufreq_fast_switch(struct cpufreq_policy *policy,
+ unsigned int target_freq)
+{
+ unsigned int cpu = policy->cpu;
+
+ return hisi_cpufreq_set_freq(cpu, target_freq);
+}
+
+static int hisi_cpufreq_set_target(struct cpufreq_policy *policy,
+ unsigned int target_freq,
+ unsigned int relation)
+{
+ struct cpufreq_freqs freqs;
+ unsigned int cpu = policy->cpu;
+ int ret;
+
+ freqs.old = policy->cur;
+ freqs.new = target_freq;
+
+ cpufreq_freq_transition_begin(policy, &freqs);
+ ret = hisi_cpufreq_set_freq(cpu, target_freq);
+ cpufreq_freq_transition_end(policy, &freqs, ret != 0);
+
+ return ret;
+}
+
+static void __amu_get_cpufreq(void *arg)
+{
+ u64 core_cnt1, const_cnt1;
+ u64 core_cnt2, const_cnt2;
+ u64 core_delta, const_delta;
+ unsigned int const_freq;
+ unsigned int *cur_freq = arg;
+
+ const_cnt1 = read_sysreg_s(SYS_AMEVCNTR0_CONST_EL0);
+ core_cnt1 = read_sysreg_s(SYS_AMEVCNTR0_CORE_EL0);
+ udelay(2);
+ const_cnt2 = read_sysreg_s(SYS_AMEVCNTR0_CONST_EL0);
+ core_cnt2 = read_sysreg_s(SYS_AMEVCNTR0_CORE_EL0);
+
+ const_delta = const_cnt2 = const_cnt1;
+ core_delta = core_cnt2 - core_cnt1;
+ if (!const_delta || !core_delta) {
+ *cur_freq = 0;
+ return;
+ }
+
+ const_freq = arch_timer_get_cntfrq();
+ *cur_freq = core_delta * const_freq / const_delta;
+}
+
+static unsigned int amu_get_cpufreq(unsigned int cpunum)
+{
+ int cur_freq;
+
+ smp_call_function_single(cpunum, __amu_get_cpufreq, &cur_freq, true);
+
+ return cur_freq;
+}
+
+static unsigned int hisi_cpufreq_get_rate(unsigned int cpunum)
+{
+ unsigned int cur_freq;
+
+ if (cpus_have_cap(ARM64_HAS_AMU_EXTN)) {
+ cur_freq = amu_get_cpufreq(cpunum);
+ if (cur_freq)
+ return cur_freq/1000;
+ }
+
+ return per_cpu(cpufreq_shm_data, cpunum)->target_freq;
+}
+
+static int hisi_cpufreq_verify_policy(struct cpufreq_policy_data *policy)
+{
+ cpufreq_verify_within_cpu_limits(policy);
+ return 0;
+}
+
+static int hisi_cpufreq_cpu_init(struct cpufreq_policy *policy)
+{
+ unsigned int cpu = policy->cpu;
+ struct hisi_cpufreq_cpudata *cpudata = &cpufreq_cpudata[cpu];
+
+ policy->min = cpudata->min_freq;
+ policy->max = cpudata->max_freq;
+ policy->cpuinfo.min_freq = cpudata->min_freq;
+ policy->cpuinfo.max_freq = cpudata->max_freq;
+ policy->transition_delay_us = cpudata->transition_delay;
+ policy->shared_type = CPUFREQ_SHARED_TYPE_ANY;
+ policy->fast_switch_possible = true;
+
+ cpumask_copy(policy->cpus, &cpudata->shared_cpus);
+
+ return 0;
+}
+
+static int hisi_cpufreq_set_boost(int state)
+{
+ struct cpufreq_policy *policy;
+ u64 max_freq;
+ unsigned int cpu;
+ int ret;
+
+ for_each_online_cpu(cpu) {
+ if (state)
+ max_freq = cpufreq_cpudata[cpu].turbo_freq;
+ else
+ max_freq = cpufreq_cpudata[cpu].max_freq;
+
+ policy = cpufreq_cpu_get(cpu);
+ if (!policy)
+ continue;
+
+ if (policy->max == max_freq) {
+ cpufreq_cpu_put(policy);
+ continue;
+ }
+
+ policy->max = policy->cpuinfo.max_freq = max_freq;
+ ret = freq_qos_update_request(policy->max_freq_req, max_freq);
+ if (ret < 0) {
+ cpufreq_cpu_put(policy);
+ return ret;
+ }
+
+ cpufreq_cpu_put(policy);
+ }
+
+ return 0;
+}
+
+static struct cpufreq_driver hisi_cpufreq_driver = {
+ .flags = CPUFREQ_CONST_LOOPS,
+ .init = hisi_cpufreq_cpu_init,
+ .verify = hisi_cpufreq_verify_policy,
+ .target = hisi_cpufreq_set_target,
+ .fast_switch = hisi_cpufreq_fast_switch,
+ .get = hisi_cpufreq_get_rate,
+ .set_boost = hisi_cpufreq_set_boost,
+ .name = "hisi_cpufreq",
+};
+
+static int __init hisi_cpufreq_parse_device_property(struct device *dev,
+ unsigned int cpu)
+{
+ u64 addr;
+ u32 size, val;
+ struct hisi_cpufreq_shm *shm_data;
+
+ if (!hisi_cpufreq_method && device_property_read_u32(dev,
+ "cpufreq_method", &hisi_cpufreq_method))
+ return -ENODEV;
+
+ if (!device_property_read_u64(dev, "shm_base_addr", &addr) &&
+ !device_property_read_u32(dev, "shm_size", &size))
+ per_cpu(cpufreq_shm_data, cpu) = ioremap(addr, size);
+ else if (hisi_cpufreq_method != HISI_CPUFREQ_METHOD_SMC)
+ return -EINVAL;
+
+ if (!device_property_read_u64(dev, "doorbell_addr", &addr))
+ cpufreq_cpudata[cpu].doorbell_addr = ioremap(addr, 4);
+ else if (hisi_cpufreq_method == HISI_CPUFREQ_METHOD_NOTIFY)
+ return -EINVAL;
+ if (!device_property_read_u32(dev, "doorbell_val", &val))
+ cpufreq_cpudata[cpu].doorbell_val = val;
+
+ if (!device_property_read_u32(dev, "transition_delay", &val))
+ cpufreq_cpudata[cpu].transition_delay = val;
+
+ shm_data = per_cpu(cpufreq_shm_data, cpu);
+ cpufreq_cpudata[cpu].max_freq = shm_data->max_freq;
+ cpufreq_cpudata[cpu].min_freq = shm_data->min_freq;
+ cpufreq_cpudata[cpu].turbo_freq = shm_data->turbo_freq;
+
+ return 0;
+}
+
+static int __init hisi_cpufreq_init(void)
+{
+ struct hisi_cpufreq_cpudata *cpudata;
+ struct device *dev;
+ unsigned int i, j;
+ int ret;
+
+ if (acpi_disabled)
+ return -ENODEV;
+
+ cpufreq_cpudata = kcalloc(num_possible_cpus(),
+ sizeof(struct hisi_cpufreq_cpudata),
+ GFP_KERNEL);
+ if (!cpufreq_cpudata)
+ return -ENOMEM;
+
+ for_each_possible_cpu(i) {
+ dev = get_cpu_device(i);
+ if (!dev)
+ goto failed;
+
+ ret = hisi_cpufreq_parse_device_property(dev, i);
+ if (ret)
+ goto failed;
+ }
+
+ /* parse clock domain info */
+ for_each_possible_cpu(i) {
+ cpudata = &cpufreq_cpudata[i];
+ cpumask_set_cpu(i, &cpudata->shared_cpus);
+
+ for_each_possible_cpu(j) {
+ if (i == j)
+ continue;
+ if (per_cpu(cpufreq_shm_data, i)->clock_domain ==
+ per_cpu(cpufreq_shm_data, j)->clock_domain)
+ cpumask_set_cpu(j, &cpudata->shared_cpus);
+ }
+ }
+
+ if (cpufreq_register_driver(&hisi_cpufreq_driver))
+ goto failed;
+
+ return 0;
+
+failed:
+ kfree(cpufreq_cpudata);
+ return -ENODEV;
+}
+
+static void __exit hisi_cpufreq_exit(void)
+{
+ cpufreq_unregister_driver(&hisi_cpufreq_driver);
+ kfree(cpufreq_cpudata);
+}
+
+late_initcall(hisi_cpufreq_init);
+module_exit(hisi_cpufreq_exit);
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Xiongfeng Wang <[email protected]>");
+MODULE_DESCRIPTION("HiSilicon CPUFreq driver");
--
1.7.12.4
On Thu, Apr 30, 2020 at 02:19:59PM +0800, Xiongfeng Wang wrote:
> HiSilicon SoC has a separate System Control Processor(SCP) dedicated for
> clock frequency adjustment and has been using the cpufreq driver
> 'cppc-cpufreq'. New HiSilicon SoC HIP09 add support for CPU Boost, but
> ACPI CPPC doesn't support this. In HiSilicon SoC HIP09, each core has
> its own clock domain. It is better for the core itself to adjust its
> frequency when we require fast response. In this patch, we add a
> separate cpufreq driver for HiSilicon SoC HIP09.
>
I disagree with this approach unless you have tried to extend the CPPC
in ACPI to accommodate this boost feature you need. Until you show those
efforts and disagreement to do that from ASWG, I am NACKing this approach.
--
Regards,
Sudeep
Hi Sudeep,
Thanks for your reply.
On 2020/4/30 17:55, Sudeep Holla wrote:
> On Thu, Apr 30, 2020 at 02:19:59PM +0800, Xiongfeng Wang wrote:
>> HiSilicon SoC has a separate System Control Processor(SCP) dedicated for
>> clock frequency adjustment and has been using the cpufreq driver
>> 'cppc-cpufreq'. New HiSilicon SoC HIP09 add support for CPU Boost, but
>> ACPI CPPC doesn't support this. In HiSilicon SoC HIP09, each core has
>> its own clock domain. It is better for the core itself to adjust its
>> frequency when we require fast response. In this patch, we add a
>> separate cpufreq driver for HiSilicon SoC HIP09.
>>
>
> I disagree with this approach unless you have tried to extend the CPPC
> in ACPI to accommodate this boost feature you need. Until you show those
> efforts and disagreement to do that from ASWG, I am NACKing this approach.
I will try to extend the CPPC to accommodate the CPU Boost feature.
Thanks,
Xiongfeng
>
> --
> Regards,
> Sudeep
>
> .
>
Hi Sudeep,
On 2020/4/30 17:55, Sudeep Holla wrote:
> On Thu, Apr 30, 2020 at 02:19:59PM +0800, Xiongfeng Wang wrote:
>> HiSilicon SoC has a separate System Control Processor(SCP) dedicated for
>> clock frequency adjustment and has been using the cpufreq driver
>> 'cppc-cpufreq'. New HiSilicon SoC HIP09 add support for CPU Boost, but
>> ACPI CPPC doesn't support this. In HiSilicon SoC HIP09, each core has
>> its own clock domain. It is better for the core itself to adjust its
>> frequency when we require fast response. In this patch, we add a
>> separate cpufreq driver for HiSilicon SoC HIP09.
>>
>
> I disagree with this approach unless you have tried to extend the CPPC
> in ACPI to accommodate this boost feature you need. Until you show those
> efforts and disagreement to do that from ASWG, I am NACKing this approach.
Unfortunately we are not in ASWG at now, could you please give some
help about extending CPPC in ACPI to support boost feature?
Thanks
Hanjun
+ Thanu, Souvik who work with ASWG
On Wed, May 06, 2020 at 05:36:51PM +0800, Hanjun Guo wrote:
> Hi Sudeep,
>
> On 2020/4/30 17:55, Sudeep Holla wrote:
> > On Thu, Apr 30, 2020 at 02:19:59PM +0800, Xiongfeng Wang wrote:
> > > HiSilicon SoC has a separate System Control Processor(SCP) dedicated for
> > > clock frequency adjustment and has been using the cpufreq driver
> > > 'cppc-cpufreq'. New HiSilicon SoC HIP09 add support for CPU Boost, but
> > > ACPI CPPC doesn't support this. In HiSilicon SoC HIP09, each core has
> > > its own clock domain. It is better for the core itself to adjust its
> > > frequency when we require fast response. In this patch, we add a
> > > separate cpufreq driver for HiSilicon SoC HIP09.
> > >
> >
> > I disagree with this approach unless you have tried to extend the CPPC
> > in ACPI to accommodate this boost feature you need. Until you show those
> > efforts and disagreement to do that from ASWG, I am NACKing this approach.
>
> Unfortunately we are not in ASWG at now, could you please give some
> help about extending CPPC in ACPI to support boost feature?
>
You may have to provide more details than the commit log for sure as I
haven't understood the boost feature and what is missing in ACPI CPPC.
--
Regards,
Sudeep
Hi,
ACPI CPPC already supports the notion of boost. Not sure we need any enhancements there.
Regards,
Thanu
On 06/05/2020, 18:19, "Sudeep Holla" <[email protected]> wrote:
+ Thanu, Souvik who work with ASWG
On Wed, May 06, 2020 at 05:36:51PM +0800, Hanjun Guo wrote:
> Hi Sudeep,
>
> On 2020/4/30 17:55, Sudeep Holla wrote:
> > On Thu, Apr 30, 2020 at 02:19:59PM +0800, Xiongfeng Wang wrote:
> > > HiSilicon SoC has a separate System Control Processor(SCP) dedicated for
> > > clock frequency adjustment and has been using the cpufreq driver
> > > 'cppc-cpufreq'. New HiSilicon SoC HIP09 add support for CPU Boost, but
> > > ACPI CPPC doesn't support this. In HiSilicon SoC HIP09, each core has
> > > its own clock domain. It is better for the core itself to adjust its
> > > frequency when we require fast response. In this patch, we add a
> > > separate cpufreq driver for HiSilicon SoC HIP09.
> > >
> >
> > I disagree with this approach unless you have tried to extend the CPPC
> > in ACPI to accommodate this boost feature you need. Until you show those
> > efforts and disagreement to do that from ASWG, I am NACKing this approach.
>
> Unfortunately we are not in ASWG at now, could you please give some
> help about extending CPPC in ACPI to support boost feature?
>
You may have to provide more details than the commit log for sure as I
haven't understood the boost feature and what is missing in ACPI CPPC.
--
Regards,
Sudeep
IMPORTANT NOTICE: The contents of this email and any attachments are confidential and may also be privileged. If you are not the intended recipient, please notify the sender immediately and do not disclose the contents to any other person, use it for any purpose, or store or copy the information in any medium. Thank you.
Hi,
> From: Thanu Rangarajan <[email protected]>
> Sent: Wednesday, May 6, 2020 1:58 PM
>
> Hi,
> ACPI CPPC already supports the notion of boost. Not sure we need any
> enhancements there.
>
> Regards,
> Thanu
>
> On 06/05/2020, 18:19, "Sudeep Holla" <[email protected]> wrote:
>
> + Thanu, Souvik who work with ASWG
>
> On Wed, May 06, 2020 at 05:36:51PM +0800, Hanjun Guo wrote:
> > Hi Sudeep,
> >
> > On 2020/4/30 17:55, Sudeep Holla wrote:
> > > On Thu, Apr 30, 2020 at 02:19:59PM +0800, Xiongfeng Wang wrote:
> > > > HiSilicon SoC has a separate System Control Processor(SCP)
> dedicated for
> > > > clock frequency adjustment and has been using the cpufreq driver
> > > > 'cppc-cpufreq'. New HiSilicon SoC HIP09 add support for CPU Boost,
> but
> > > > ACPI CPPC doesn't support this. In HiSilicon SoC HIP09, each core has
> > > > its own clock domain. It is better for the core itself to adjust its
> > > > frequency when we require fast response. In this patch, we add a
> > > > separate cpufreq driver for HiSilicon SoC HIP09.
> > > >
> > >
> > > I disagree with this approach unless you have tried to extend the CPPC
> > > in ACPI to accommodate this boost feature you need. Until you show
> those
> > > efforts and disagreement to do that from ASWG, I am NACKing this
> approach.
> >
> > Unfortunately we are not in ASWG at now, could you please give some
> > help about extending CPPC in ACPI to support boost feature?
> >
>
> You may have to provide more details than the commit log for sure as I
> haven't understood the boost feature and what is missing in ACPI CPPC.
I would agree with Thanu here regarding the ACPI spec part - everything is already there.
It seems to me that the .set_boost is today not handled in cppc_cpufreq.c. In fact if a platform provides a value for Highest Performance which is different than Nominal Performance, then the entire range of performance is always requested, which works well for platforms which do boost enable/disable selection at hardware/firmware level.
.boost hook could potentially be useful in cppc_cpufreq.c for platforms which would manage the boost selection in software. But it would be good to keep a common implementation which can choose between "software-triggered or auto-boost" selection for different platforms.
Regards,
Souvik
>
> --
> Regards,
> Sudeep
>
>
IMPORTANT NOTICE: The contents of this email and any attachments are confidential and may also be privileged. If you are not the intended recipient, please notify the sender immediately and do not disclose the contents to any other person, use it for any purpose, or store or copy the information in any medium. Thank you.
Hi Thanu, Souvik, Sudeep,
Thanks a lot for the prompt reply, and it clarify a lot for
us, comment inline below.
On 2020/5/6 22:57, Souvik Chakravarty wrote:
> Hi,
>
>> From: Thanu Rangarajan <[email protected]>
>> Sent: Wednesday, May 6, 2020 1:58 PM
>>
>> Hi,
>> ACPI CPPC already supports the notion of boost. Not sure we need any
>> enhancements there.
>>
>> Regards,
>> Thanu
>>
>> On 06/05/2020, 18:19, "Sudeep Holla" <[email protected]> wrote:
>>
>> + Thanu, Souvik who work with ASWG
>>
>> On Wed, May 06, 2020 at 05:36:51PM +0800, Hanjun Guo wrote:
>> > Hi Sudeep,
>> >
>> > On 2020/4/30 17:55, Sudeep Holla wrote:
>> > > On Thu, Apr 30, 2020 at 02:19:59PM +0800, Xiongfeng Wang wrote:
>> > > > HiSilicon SoC has a separate System Control Processor(SCP)
>> dedicated for
>> > > > clock frequency adjustment and has been using the cpufreq driver
>> > > > 'cppc-cpufreq'. New HiSilicon SoC HIP09 add support for CPU Boost,
>> but
>> > > > ACPI CPPC doesn't support this. In HiSilicon SoC HIP09, each core has
>> > > > its own clock domain. It is better for the core itself to adjust its
>> > > > frequency when we require fast response. In this patch, we add a
>> > > > separate cpufreq driver for HiSilicon SoC HIP09.
>> > > >
>> > >
>> > > I disagree with this approach unless you have tried to extend the CPPC
>> > > in ACPI to accommodate this boost feature you need. Until you show
>> those
>> > > efforts and disagreement to do that from ASWG, I am NACKing this
>> approach.
>> >
>> > Unfortunately we are not in ASWG at now, could you please give some
>> > help about extending CPPC in ACPI to support boost feature?
>> >
>>
>> You may have to provide more details than the commit log for sure as I
>> haven't understood the boost feature and what is missing in ACPI CPPC.
>
> I would agree with Thanu here regarding the ACPI spec part - everything is already there.
I take another detail read of the spec and as you said,
everything is already there,thanks!. I was misleading by the
CPPC code which it's using the 'Highest Performance' as
the max performance not the 'Nominal Performance', so seems
that 'Highest Performance' is the normal max performance but
not the boost performance.
>
> It seems to me that the .set_boost is today not handled in cppc_cpufreq.c. In fact if a platform provides a value for Highest Performance which is different than Nominal Performance, then the entire range of performance is always requested, which works well for platforms which do boost enable/disable selection at hardware/firmware level.
Yes, so for now, the CPPC code will enable the boost feature in
default if the firmware provides a value for Highest Performance
which is different than Nominal Performance.
>
> .boost hook could potentially be useful in cppc_cpufreq.c for platforms which would manage the boost selection in software. But it would be good to keep a common implementation which can choose between "software-triggered or auto-boost" selection for different platforms.
Thanks for the clarify, it helps a lot, Xiongfeng prepared
some patches to enable .boost hook, but needs to set the
'Nominal Performance' as the max performance, and
'Highest Performance' is the max boost performance, will
send out for comments.
Best Regards,
Hanjun