This is the start of the stable review cycle for the 5.10.46 release.
There are 146 patches in this series, all will be posted as a response
to this one. If anyone has any issues with these being applied, please
let me know.
Responses should be made by Wed, 23 Jun 2021 15:48:46 +0000.
Anything received after that time might be too late.
The whole patch series can be found in one patch at:
https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.10.46-rc1.gz
or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.10.y
and the diffstat can be found below.
thanks,
greg k-h
-------------
Pseudo-Shortlog of commits:
Greg Kroah-Hartman <[email protected]>
Linux 5.10.46-rc1
Peter Chen <[email protected]>
usb: dwc3: core: fix kernel panic when do reboot
Jack Pham <[email protected]>
usb: dwc3: debugfs: Add and remove endpoint dirs dynamically
Arnaldo Carvalho de Melo <[email protected]>
perf beauty: Update copy of linux/socket.h with the kernel sources
Arnaldo Carvalho de Melo <[email protected]>
tools headers UAPI: Sync linux/in.h copy with the kernel sources
Fugang Duan <[email protected]>
net: fec_ptp: add clock rate zero check
Joakim Zhang <[email protected]>
net: stmmac: disable clocks in stmmac_remove_config_dt()
Andrew Morton <[email protected]>
mm/slub.c: include swab.h
Kees Cook <[email protected]>
mm/slub: actually fix freelist pointer vs redzoning
Kees Cook <[email protected]>
mm/slub: fix redzoning for small allocations
Kees Cook <[email protected]>
mm/slub: clarify verification reporting
Peter Xu <[email protected]>
mm/swap: fix pte_same_as_swp() not removing uffd-wp bit when compare
Nikolay Aleksandrov <[email protected]>
net: bridge: fix vlan tunnel dst refcnt when egressing
Nikolay Aleksandrov <[email protected]>
net: bridge: fix vlan tunnel dst null pointer dereference
Esben Haabendal <[email protected]>
net: ll_temac: Fix TX BD buffer overwrite
Esben Haabendal <[email protected]>
net: ll_temac: Make sure to free skb when it is completely used
Yifan Zhang <[email protected]>
drm/amdgpu/gfx9: fix the doorbell missing when in CGPG issue.
Yifan Zhang <[email protected]>
drm/amdgpu/gfx10: enlarge CP_MEC_DOORBELL_RANGE_UPPER to cover full doorbell.
Avraham Stern <[email protected]>
cfg80211: avoid double free of PMSR request
Johannes Berg <[email protected]>
cfg80211: make certificate generation more robust
Mathy Vanhoef <[email protected]>
mac80211: Fix NULL ptr deref for injected rate info
Bumyong Lee <[email protected]>
dmaengine: pl330: fix wrong usage of spinlock flags in dma_cyclc
Pingfan Liu <[email protected]>
crash_core, vmcoreinfo: append 'SECTION_SIZE_BITS' to vmcoreinfo
Thomas Gleixner <[email protected]>
x86/fpu: Reset state for all signal restore failures
Andy Lutomirski <[email protected]>
x86/fpu: Invalidate FPU state after a failed XRSTOR from a user buffer
Thomas Gleixner <[email protected]>
x86/fpu: Prevent state corruption in __fpu__restore_sig()
Thomas Gleixner <[email protected]>
x86/pkru: Write hardware init value to PKRU when xstate is init
Tom Lendacky <[email protected]>
x86/ioremap: Map EFI-reserved memory as encrypted for SEV
Thomas Gleixner <[email protected]>
x86/process: Check PF_KTHREAD and not current->mm for kernel threads
Fan Du <[email protected]>
x86/mm: Avoid truncating memblocks for SGX memory
Vineet Gupta <[email protected]>
ARCv2: save ABI registers across signal handling
Harald Freudenberger <[email protected]>
s390/ap: Fix hanging ioctl caused by wrong msg counter
Alexander Gordeev <[email protected]>
s390/mcck: fix calculation of SIE critical section size
Wanpeng Li <[email protected]>
KVM: X86: Fix x86_emulator slab cache leak
Sean Christopherson <[email protected]>
KVM: x86/mmu: Calculate and check "full" mmu_role for nested MMU
Sean Christopherson <[email protected]>
KVM: x86: Immediately reset the MMU context when the SMM flag is cleared
Chiqijun <[email protected]>
PCI: Work around Huawei Intelligent NIC VF FLR erratum
Sriharsha Basavapatna <[email protected]>
PCI: Add ACS quirk for Broadcom BCM57414 NIC
Pali Rohár <[email protected]>
PCI: aardvark: Fix kernel panic during PIO transfer
Shanker Donthineni <[email protected]>
PCI: Mark some NVIDIA GPUs to avoid bus reset
Antti Järvinen <[email protected]>
PCI: Mark TI C667X to avoid bus reset
Steven Rostedt (VMware) <[email protected]>
tracing: Do no increment trace_clock_global() by one
Steven Rostedt (VMware) <[email protected]>
tracing: Do not stop recording comms if the trace file is being read
Steven Rostedt (VMware) <[email protected]>
tracing: Do not stop recording cmdlines when tracing is off
Breno Lima <[email protected]>
usb: chipidea: imx: Fix Battery Charger 1.2 CDP detection
Andrew Lunn <[email protected]>
usb: core: hub: Disable autosuspend for Cypress CY7C65632
Pavel Skripkin <[email protected]>
can: mcba_usb: fix memory leak in mcba_usb
Oleksij Rempel <[email protected]>
can: j1939: fix Use-after-Free, hold skb ref while in use
Tetsuo Handa <[email protected]>
can: bcm/raw/isotp: use per module netdevice notifier
Norbert Slusarek <[email protected]>
can: bcm: fix infoleak in struct bcm_msg_head
Daniel Borkmann <[email protected]>
bpf: Do not mark insn as seen under speculative path verification
Daniel Borkmann <[email protected]>
bpf: Inherit expanded/patched seen count from old aux data
Odin Ugedal <[email protected]>
sched/fair: Correctly insert cfs_rq's to list on unthrottle
Marc Zyngier <[email protected]>
irqchip/gic-v3: Workaround inconsistent PMR setting on NMI entry
Feng Tang <[email protected]>
mm: relocate 'write_protect_seq' in struct mm_struct
Riwen Lu <[email protected]>
hwmon: (scpi-hwmon) shows the negative temperature properly
Chen Li <[email protected]>
radeon: use memcpy_to/fromio for UVD fw upload
Srinivasa Rao Mandadapu <[email protected]>
ASoC: qcom: lpass-cpu: Fix pop noise during audio capture begin
Saravana Kannan <[email protected]>
drm/sun4i: dw-hdmi: Make HDMI PHY into a platform device
Sergio Paracuellos <[email protected]>
pinctrl: ralink: rt2880: avoid to error in calls is pin is already enabled
Oder Chiou <[email protected]>
ASoC: rt5682: Fix the fast discharge for headset unplugging in soundwire mode
Axel Lin <[email protected]>
regulator: rt4801: Fix NULL pointer dereference if priv->enable_gpios is NULL
Patrice Chotard <[email protected]>
spi: stm32-qspi: Always wait BUSY bit to be cleared in stm32_qspi_wait_cmd()
Richard Weinberger <[email protected]>
ASoC: tas2562: Fix TDM_CFG0_SAMPRATE values
Vincent Guittot <[email protected]>
sched/pelt: Ensure that *_sum is always synced with *_avg
zpershuai <[email protected]>
spi: spi-zynq-qspi: Fix some wrong goto jumps & missing error code
ChiYuan Huang <[email protected]>
regulator: rtmv20: Fix to make regcache value first reading back from HW
Nicolas Cavallari <[email protected]>
ASoC: fsl-asoc-card: Set .owner attribute when registering card.
Tiezhu Yang <[email protected]>
phy: phy-mtk-tphy: Fix some resource leaks in mtk_phy_init()
Jack Yu <[email protected]>
ASoC: rt5659: Fix the lost powers for the HDA header
Til Jasper Ullrich <[email protected]>
platform/x86: thinkpad_acpi: Add X1 Carbon Gen 9 second fan support
Axel Lin <[email protected]>
regulator: bd70528: Fix off-by-one for buck123 .n_voltages setting
Dmitry Osipenko <[email protected]>
regulator: max77620: Silence deferred probe error
Axel Lin <[email protected]>
regulator: cros-ec: Fix error code in dev_err message
Pavel Skripkin <[email protected]>
net: ethernet: fix potential use-after-free in ec_bhf_remove
Toke Høiland-Jørgensen <[email protected]>
icmp: don't send out ICMP messages with a source address of 0.0.0.0
Somnath Kotur <[email protected]>
bnxt_en: Call bnxt_ethtool_free() in bnxt_init_one() error path
Rukhsana Ansari <[email protected]>
bnxt_en: Fix TQM fastpath ring backing store computation
Michael Chan <[email protected]>
bnxt_en: Rediscover PHY capabilities after firmware reset
Pavel Machek <[email protected]>
cxgb4: fix wrong shift.
Linyu Yuan <[email protected]>
net: cdc_eem: fix tx fixup skb leak
Pavel Skripkin <[email protected]>
net: hamradio: fix memory leak in mkiss_close
Christophe JAILLET <[email protected]>
be2net: Fix an error handling path in 'be_probe()'
Aya Levin <[email protected]>
net/mlx5: Reset mkey index on creation
Parav Pandit <[email protected]>
net/mlx5: E-Switch, Allow setting GUID for host PF vport
Parav Pandit <[email protected]>
net/mlx5: E-Switch, Read PF mac address
Eric Dumazet <[email protected]>
net/af_unix: fix a data-race in unix_dgram_sendmsg / unix_release_sock
Chengyang Fan <[email protected]>
net: ipv4: fix memory leak in ip_mc_add1_src
Joakim Zhang <[email protected]>
net: fec_ptp: fix issue caused by refactor the fec_devtype
Dongliang Mu <[email protected]>
net: usb: fix possible use-after-free in smsc75xx_bind
Aleksander Jan Bajkowski <[email protected]>
lantiq: net: fix duplicated skb in rx descriptor ring
Maciej Żenczykowski <[email protected]>
net: cdc_ncm: switch to eth%d interface naming
Jakub Kicinski <[email protected]>
ptp: improve max_adj check against unreasonable values
Daniel Borkmann <[email protected]>
bpf: Fix leakage under speculation on mispredicted branches
Pavel Skripkin <[email protected]>
net: qrtr: fix OOB Read in qrtr_endpoint_post
David Ahern <[email protected]>
ipv4: Fix device used for dst_alloc with local routes
Rahul Lakkireddy <[email protected]>
cxgb4: fix wrong ethtool n-tuple rule lookup
Christophe JAILLET <[email protected]>
netxen_nic: Fix an error handling path in 'netxen_nic_probe()'
Christophe JAILLET <[email protected]>
qlcnic: Fix an error handling path in 'qlcnic_probe()'
Jakub Kicinski <[email protected]>
ethtool: strset: fix message length calculation
Alex Elder <[email protected]>
net: qualcomm: rmnet: don't over-count statistics
Subash Abhinov Kasiviswanathan <[email protected]>
net: qualcomm: rmnet: Update rmnet device MTU based on real device
Changbin Du <[email protected]>
net: make get_net_ns return error if NET_NS is disabled
Jisheng Zhang <[email protected]>
net: stmmac: dwmac1000: Fix extended MAC address registers definition
Rahul Lakkireddy <[email protected]>
cxgb4: halt chip before flashing PHY firmware image
Rahul Lakkireddy <[email protected]>
cxgb4: fix sleep in atomic when flashing PHY firmware
Rahul Lakkireddy <[email protected]>
cxgb4: fix endianness when flashing boot image
Christophe JAILLET <[email protected]>
alx: Fix an error handling path in 'alx_probe()'
Paolo Abeni <[email protected]>
selftests: mptcp: enable syncookie only in absence of reorders
Paolo Abeni <[email protected]>
mptcp: do not warn on bad input from the network
Paolo Abeni <[email protected]>
mptcp: try harder to borrow memory from subflow under pressure
Maxim Mikityanskiy <[email protected]>
sch_cake: Fix out of bounds when parsing TCP options and header
Maxim Mikityanskiy <[email protected]>
mptcp: Fix out of bounds when parsing TCP options
Maxim Mikityanskiy <[email protected]>
netfilter: synproxy: Fix out of bounds when parsing TCP options
Aya Levin <[email protected]>
net/mlx5e: Block offload of outer header csum for UDP tunnels
Maor Gottlieb <[email protected]>
net/mlx5: DR, Don't use SW steering when RoCE is not supported
Yevgeny Kliteynik <[email protected]>
net/mlx5: DR, Allow SW steering for sw_owner_v2 devices
Maor Gottlieb <[email protected]>
net/mlx5: Consider RoCE cap before init RDMA resources
Dima Chumak <[email protected]>
net/mlx5e: Fix page reclaim for dead peer hairpin
Huy Nguyen <[email protected]>
net/mlx5e: Remove dependency in IPsec initialization flows
Marcelo Ricardo Leitner <[email protected]>
net/sched: act_ct: handle DNAT tuple collision
Ido Schimmel <[email protected]>
rtnetlink: Fix regression in bridge VLAN configuration
Paolo Abeni <[email protected]>
udp: fix race between close() and udp_abort()
Maciej Fijalkowski <[email protected]>
ice: parameterize functions responsible for Tx ring management
Maciej Fijalkowski <[email protected]>
ice: add ndo_bpf callback for safe mode netdev ops
Florian Westphal <[email protected]>
netfilter: nft_fib_ipv6: skip ipv6 packets from any to link-local
Aleksander Jan Bajkowski <[email protected]>
net: lantiq: disable interrupt before sheduling NAPI
Vladimir Oltean <[email protected]>
net: dsa: felix: re-enable TX flow control in ocelot_port_flush()
Pavel Skripkin <[email protected]>
net: rds: fix memory leak in rds_recvmsg
Nicolas Dichtel <[email protected]>
vrf: fix maximum MTU
Nanyong Sun <[email protected]>
net: ipv4: fix memory leak in netlbl_cipsov4_add_std
Kev Jackson <[email protected]>
libbpf: Fixes incorrect rx_ring_setup_done
Mykola Kostenok <[email protected]>
mlxsw: core: Set thermal zone polling delay argument to real value at init
Petr Machata <[email protected]>
mlxsw: reg: Spectrum-3: Enforce lowest max-shaper burst size of 11
Du Cheng <[email protected]>
mac80211: fix skb length check in ieee80211_scan_rx()
Sven Eckelmann <[email protected]>
batman-adv: Avoid WARN_ON timing related checks
Matthew Bobrowski <[email protected]>
fanotify: fix copy_event_to_user() fid error clean up
Jim Mattson <[email protected]>
kvm: LAPIC: Restore guard to prevent illegal APIC register access
yangerkun <[email protected]>
mm/memory-failure: make sure wait for page writeback in memory_failure
Dan Carpenter <[email protected]>
afs: Fix an IS_ERR() vs NULL check
Yang Yingliang <[email protected]>
dmaengine: stedma40: add missing iounmap() on error in d40_probe()
Randy Dunlap <[email protected]>
dmaengine: SF_PDMA depends on HAS_IOMEM
Randy Dunlap <[email protected]>
dmaengine: QCOM_HIDMA_MGMT depends on HAS_IOMEM
Randy Dunlap <[email protected]>
dmaengine: ALTERA_MSGDMA depends on HAS_IOMEM
Quanyang Wang <[email protected]>
dmaengine: xilinx: dpdma: initialize registers before request_irq
Zhen Lei <[email protected]>
dmaengine: fsl-dpaa2-qdma: Fix error return code in two functions
Dave Jiang <[email protected]>
dmaengine: idxd: add missing dsa driver unregister
-------------
Diffstat:
Documentation/vm/slub.rst | 10 +--
Makefile | 4 +-
arch/arc/include/uapi/asm/sigcontext.h | 1 +
arch/arc/kernel/signal.c | 43 +++++++++++
arch/s390/kernel/entry.S | 2 +-
arch/x86/include/asm/fpu/internal.h | 13 +++-
arch/x86/kernel/fpu/signal.c | 54 ++++++++-----
arch/x86/kvm/lapic.c | 3 +
arch/x86/kvm/mmu/mmu.c | 26 ++++++-
arch/x86/kvm/x86.c | 6 +-
arch/x86/mm/ioremap.c | 4 +-
arch/x86/mm/numa.c | 8 +-
drivers/dma/Kconfig | 1 +
drivers/dma/fsl-dpaa2-qdma/dpaa2-qdma.c | 3 +
drivers/dma/idxd/init.c | 1 +
drivers/dma/pl330.c | 6 +-
drivers/dma/qcom/Kconfig | 1 +
drivers/dma/sf-pdma/Kconfig | 1 +
drivers/dma/ste_dma40.c | 3 +
drivers/dma/xilinx/xilinx_dpdma.c | 24 +++++-
drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c | 6 +-
drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c | 6 +-
drivers/gpu/drm/radeon/radeon_uvd.c | 4 +-
drivers/gpu/drm/sun4i/sun8i_dw_hdmi.c | 31 +++++++-
drivers/gpu/drm/sun4i/sun8i_dw_hdmi.h | 5 +-
drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c | 41 ++++++++--
drivers/hwmon/scpi-hwmon.c | 9 +++
drivers/irqchip/irq-gic-v3.c | 36 ++++++++-
drivers/net/can/usb/mcba_usb.c | 17 ++++-
drivers/net/ethernet/atheros/alx/main.c | 1 +
drivers/net/ethernet/broadcom/bnxt/bnxt.c | 8 +-
drivers/net/ethernet/chelsio/cxgb4/cxgb4_ethtool.c | 48 ++++++++----
drivers/net/ethernet/chelsio/cxgb4/cxgb4_filter.c | 2 +-
drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c | 2 -
drivers/net/ethernet/chelsio/cxgb4/t4_hw.c | 46 ++++++-----
drivers/net/ethernet/ec_bhf.c | 4 +-
drivers/net/ethernet/emulex/benet/be_main.c | 1 +
drivers/net/ethernet/freescale/fec_ptp.c | 8 +-
drivers/net/ethernet/intel/ice/ice_lib.c | 18 +++--
drivers/net/ethernet/intel/ice/ice_main.c | 15 ++++
drivers/net/ethernet/lantiq_xrx200.c | 5 +-
.../ethernet/mellanox/mlx5/core/en_accel/ipsec.c | 3 -
drivers/net/ethernet/mellanox/mlx5/core/en_main.c | 10 +--
drivers/net/ethernet/mellanox/mlx5/core/en_tc.c | 2 +-
drivers/net/ethernet/mellanox/mlx5/core/eswitch.c | 6 ++
drivers/net/ethernet/mellanox/mlx5/core/mr.c | 2 +-
drivers/net/ethernet/mellanox/mlx5/core/rdma.c | 3 +
.../ethernet/mellanox/mlx5/core/steering/dr_cmd.c | 17 +++--
.../mellanox/mlx5/core/steering/dr_domain.c | 17 +++--
.../mellanox/mlx5/core/steering/dr_types.h | 6 +-
.../ethernet/mellanox/mlx5/core/steering/mlx5dr.h | 6 +-
drivers/net/ethernet/mellanox/mlx5/core/transobj.c | 30 ++++++--
drivers/net/ethernet/mellanox/mlx5/core/vport.c | 2 -
drivers/net/ethernet/mellanox/mlxsw/core_thermal.c | 6 +-
drivers/net/ethernet/mellanox/mlxsw/reg.h | 2 +-
drivers/net/ethernet/mscc/ocelot.c | 5 ++
.../net/ethernet/qlogic/netxen/netxen_nic_main.c | 2 +
drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c | 1 +
drivers/net/ethernet/qualcomm/rmnet/rmnet_config.c | 15 +++-
drivers/net/ethernet/qualcomm/rmnet/rmnet_config.h | 2 +
drivers/net/ethernet/qualcomm/rmnet/rmnet_vnd.c | 89 +++++++++++++++++++---
drivers/net/ethernet/qualcomm/rmnet/rmnet_vnd.h | 3 +
drivers/net/ethernet/stmicro/stmmac/dwmac1000.h | 8 +-
.../net/ethernet/stmicro/stmmac/stmmac_platform.c | 2 +
drivers/net/ethernet/xilinx/ll_temac_main.c | 8 +-
drivers/net/hamradio/mkiss.c | 1 +
drivers/net/usb/cdc_eem.c | 2 +-
drivers/net/usb/cdc_ncm.c | 2 +-
drivers/net/usb/smsc75xx.c | 10 ++-
drivers/net/vrf.c | 6 +-
drivers/pci/controller/pci-aardvark.c | 49 +++++++++---
drivers/pci/quirks.c | 89 ++++++++++++++++++++++
drivers/phy/mediatek/phy-mtk-tphy.c | 2 +
drivers/platform/x86/thinkpad_acpi.c | 1 +
drivers/ptp/ptp_clock.c | 6 +-
drivers/regulator/cros-ec-regulator.c | 3 +-
drivers/regulator/max77620-regulator.c | 10 +--
drivers/regulator/rt4801-regulator.c | 4 +-
drivers/regulator/rtmv20-regulator.c | 2 +
drivers/s390/crypto/ap_queue.c | 11 ++-
drivers/spi/spi-stm32-qspi.c | 5 +-
drivers/spi/spi-zynq-qspi.c | 7 +-
drivers/staging/mt7621-pinctrl/pinctrl-rt2880.c | 2 +-
drivers/usb/chipidea/usbmisc_imx.c | 16 +++-
drivers/usb/core/hub.c | 7 ++
drivers/usb/dwc3/core.c | 2 +-
drivers/usb/dwc3/debug.h | 3 +
drivers/usb/dwc3/debugfs.c | 21 +----
drivers/usb/dwc3/gadget.c | 3 +
fs/afs/main.c | 4 +-
fs/notify/fanotify/fanotify_user.c | 4 +-
include/linux/mfd/rohm-bd70528.h | 4 +-
include/linux/mlx5/transobj.h | 1 +
include/linux/mm_types.h | 27 +++++--
include/linux/ptp_clock_kernel.h | 2 +-
include/linux/socket.h | 2 -
include/linux/swapops.h | 15 +++-
include/net/mac80211.h | 7 +-
include/net/net_namespace.h | 7 ++
include/uapi/linux/in.h | 3 +
kernel/bpf/verifier.c | 68 +++++++++++++++--
kernel/crash_core.c | 1 +
kernel/sched/fair.c | 54 ++++++++-----
kernel/trace/trace.c | 11 ---
kernel/trace/trace_clock.c | 6 +-
mm/memory-failure.c | 7 +-
mm/slab_common.c | 3 +-
mm/slub.c | 37 ++++-----
mm/swapfile.c | 2 +-
net/batman-adv/bat_iv_ogm.c | 4 +-
net/bridge/br_private.h | 4 +-
net/bridge/br_vlan_tunnel.c | 38 +++++----
net/can/bcm.c | 62 +++++++++++----
net/can/isotp.c | 61 +++++++++++----
net/can/j1939/transport.c | 54 +++++++++----
net/can/raw.c | 62 +++++++++++----
net/core/net_namespace.c | 12 +++
net/core/rtnetlink.c | 8 +-
net/ethtool/strset.c | 2 +
net/ipv4/cipso_ipv4.c | 1 +
net/ipv4/icmp.c | 7 ++
net/ipv4/igmp.c | 1 +
net/ipv4/route.c | 15 +++-
net/ipv4/udp.c | 10 +++
net/ipv6/netfilter/nft_fib_ipv6.c | 22 +++++-
net/ipv6/udp.c | 3 +
net/mac80211/scan.c | 21 +++--
net/mac80211/tx.c | 52 +++++++++----
net/mptcp/options.c | 2 +
net/mptcp/protocol.c | 10 ++-
net/mptcp/subflow.c | 10 +--
net/netfilter/nf_synproxy_core.c | 5 ++
net/qrtr/qrtr.c | 2 +-
net/rds/recv.c | 2 +-
net/sched/act_ct.c | 21 +++--
net/sched/sch_cake.c | 6 +-
net/socket.c | 13 ----
net/unix/af_unix.c | 7 +-
net/wireless/Makefile | 2 +-
net/wireless/pmsr.c | 16 +++-
sound/soc/codecs/rt5659.c | 26 +++++--
sound/soc/codecs/rt5682-sdw.c | 3 +-
sound/soc/codecs/tas2562.h | 14 ++--
sound/soc/fsl/fsl-asoc-card.c | 1 +
sound/soc/qcom/lpass-cpu.c | 79 +++++++++++++++++++
sound/soc/qcom/lpass.h | 4 +
tools/include/uapi/linux/in.h | 3 +
tools/lib/bpf/xsk.c | 2 +-
tools/perf/trace/beauty/include/linux/socket.h | 2 -
tools/testing/selftests/net/fib_tests.sh | 25 ++++++
tools/testing/selftests/net/mptcp/mptcp_connect.sh | 11 ++-
151 files changed, 1542 insertions(+), 466 deletions(-)
From: Dan Carpenter <[email protected]>
[ Upstream commit a33d62662d275cee22888fa7760fe09d5b9cd1f9 ]
The proc_symlink() function returns NULL on error, it doesn't return
error pointers.
Fixes: 5b86d4ff5dce ("afs: Implement network namespacing")
Signed-off-by: Dan Carpenter <[email protected]>
Signed-off-by: David Howells <[email protected]>
cc: [email protected]
Link: https://lore.kernel.org/r/YLjMRKX40pTrJvgf@mwanda/
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/afs/main.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/fs/afs/main.c b/fs/afs/main.c
index b2975256dadb..179004b15566 100644
--- a/fs/afs/main.c
+++ b/fs/afs/main.c
@@ -203,8 +203,8 @@ static int __init afs_init(void)
goto error_fs;
afs_proc_symlink = proc_symlink("fs/afs", NULL, "../self/net/afs");
- if (IS_ERR(afs_proc_symlink)) {
- ret = PTR_ERR(afs_proc_symlink);
+ if (!afs_proc_symlink) {
+ ret = -ENOMEM;
goto error_proc;
}
--
2.30.2
From: Randy Dunlap <[email protected]>
[ Upstream commit 253697b93c2a1c237d34d3ae326e394aeb0ca7b3 ]
When CONFIG_HAS_IOMEM is not set/enabled, certain iomap() family
functions [including ioremap(), devm_ioremap(), etc.] are not
available.
Drivers that use these functions should depend on HAS_IOMEM so that
they do not cause build errors.
Repairs this build error:
s390-linux-ld: drivers/dma/altera-msgdma.o: in function `request_and_map':
altera-msgdma.c:(.text+0x14b0): undefined reference to `devm_ioremap'
Fixes: a85c6f1b2921 ("dmaengine: Add driver for Altera / Intel mSGDMA IP core")
Signed-off-by: Randy Dunlap <[email protected]>
Reported-by: kernel test robot <[email protected]>
Cc: Stefan Roese <[email protected]>
Cc: Vinod Koul <[email protected]>
Cc: [email protected]
Reviewed-by: Stefan Roese <[email protected]>
Phone: (+49)-8142-66989-51 Fax: (+49)-8142-66989-80 Email: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Vinod Koul <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/dma/Kconfig | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/dma/Kconfig b/drivers/dma/Kconfig
index 90284ffda58a..f2db761ee548 100644
--- a/drivers/dma/Kconfig
+++ b/drivers/dma/Kconfig
@@ -59,6 +59,7 @@ config DMA_OF
#devices
config ALTERA_MSGDMA
tristate "Altera / Intel mSGDMA Engine"
+ depends on HAS_IOMEM
select DMA_ENGINE
help
Enable support for Altera / Intel mSGDMA controller.
--
2.30.2
From: Nicolas Dichtel <[email protected]>
[ Upstream commit 9bb392f62447d73cc7dd7562413a2cd9104c82f8 ]
My initial goal was to fix the default MTU, which is set to 65536, ie above
the maximum defined in the driver: 65535 (ETH_MAX_MTU).
In fact, it's seems more consistent, wrt min_mtu, to set the max_mtu to
IP6_MAX_MTU (65535 + sizeof(struct ipv6hdr)) and use it by default.
Let's also, for consistency, set the mtu in vrf_setup(). This function
calls ether_setup(), which set the mtu to 1500. Thus, the whole mtu config
is done in the same function.
Before the patch:
$ ip link add blue type vrf table 1234
$ ip link list blue
9: blue: <NOARP,MASTER> mtu 65536 qdisc noop state DOWN mode DEFAULT group default qlen 1000
link/ether fa:f5:27:70:24:2a brd ff:ff:ff:ff:ff:ff
$ ip link set dev blue mtu 65535
$ ip link set dev blue mtu 65536
Error: mtu greater than device maximum.
Fixes: 5055376a3b44 ("net: vrf: Fix ping failed when vrf mtu is set to 0")
CC: Miaohe Lin <[email protected]>
Signed-off-by: Nicolas Dichtel <[email protected]>
Reviewed-by: David Ahern <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/vrf.c | 6 ++----
1 file changed, 2 insertions(+), 4 deletions(-)
diff --git a/drivers/net/vrf.c b/drivers/net/vrf.c
index b9b7e00b72a8..bc96ac0c5769 100644
--- a/drivers/net/vrf.c
+++ b/drivers/net/vrf.c
@@ -1184,9 +1184,6 @@ static int vrf_dev_init(struct net_device *dev)
dev->flags = IFF_MASTER | IFF_NOARP;
- /* MTU is irrelevant for VRF device; set to 64k similar to lo */
- dev->mtu = 64 * 1024;
-
/* similarly, oper state is irrelevant; set to up to avoid confusion */
dev->operstate = IF_OPER_UP;
netdev_lockdep_set_classes(dev);
@@ -1620,7 +1617,8 @@ static void vrf_setup(struct net_device *dev)
* which breaks networking.
*/
dev->min_mtu = IPV6_MIN_MTU;
- dev->max_mtu = ETH_MAX_MTU;
+ dev->max_mtu = IP6_MAX_MTU;
+ dev->mtu = dev->max_mtu;
}
static int vrf_validate(struct nlattr *tb[], struct nlattr *data[],
--
2.30.2
From: Nanyong Sun <[email protected]>
[ Upstream commit d612c3f3fae221e7ea736d196581c2217304bbbc ]
Reported by syzkaller:
BUG: memory leak
unreferenced object 0xffff888105df7000 (size 64):
comm "syz-executor842", pid 360, jiffies 4294824824 (age 22.546s)
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<00000000e67ed558>] kmalloc include/linux/slab.h:590 [inline]
[<00000000e67ed558>] kzalloc include/linux/slab.h:720 [inline]
[<00000000e67ed558>] netlbl_cipsov4_add_std net/netlabel/netlabel_cipso_v4.c:145 [inline]
[<00000000e67ed558>] netlbl_cipsov4_add+0x390/0x2340 net/netlabel/netlabel_cipso_v4.c:416
[<0000000006040154>] genl_family_rcv_msg_doit.isra.0+0x20e/0x320 net/netlink/genetlink.c:739
[<00000000204d7a1c>] genl_family_rcv_msg net/netlink/genetlink.c:783 [inline]
[<00000000204d7a1c>] genl_rcv_msg+0x2bf/0x4f0 net/netlink/genetlink.c:800
[<00000000c0d6a995>] netlink_rcv_skb+0x134/0x3d0 net/netlink/af_netlink.c:2504
[<00000000d78b9d2c>] genl_rcv+0x24/0x40 net/netlink/genetlink.c:811
[<000000009733081b>] netlink_unicast_kernel net/netlink/af_netlink.c:1314 [inline]
[<000000009733081b>] netlink_unicast+0x4a0/0x6a0 net/netlink/af_netlink.c:1340
[<00000000d5fd43b8>] netlink_sendmsg+0x789/0xc70 net/netlink/af_netlink.c:1929
[<000000000a2d1e40>] sock_sendmsg_nosec net/socket.c:654 [inline]
[<000000000a2d1e40>] sock_sendmsg+0x139/0x170 net/socket.c:674
[<00000000321d1969>] ____sys_sendmsg+0x658/0x7d0 net/socket.c:2350
[<00000000964e16bc>] ___sys_sendmsg+0xf8/0x170 net/socket.c:2404
[<000000001615e288>] __sys_sendmsg+0xd3/0x190 net/socket.c:2433
[<000000004ee8b6a5>] do_syscall_64+0x37/0x90 arch/x86/entry/common.c:47
[<00000000171c7cee>] entry_SYSCALL_64_after_hwframe+0x44/0xae
The memory of doi_def->map.std pointing is allocated in
netlbl_cipsov4_add_std, but no place has freed it. It should be
freed in cipso_v4_doi_free which frees the cipso DOI resource.
Fixes: 96cb8e3313c7a ("[NetLabel]: CIPSOv4 and Unlabeled packet integration")
Reported-by: Hulk Robot <[email protected]>
Signed-off-by: Nanyong Sun <[email protected]>
Acked-by: Paul Moore <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/ipv4/cipso_ipv4.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/net/ipv4/cipso_ipv4.c b/net/ipv4/cipso_ipv4.c
index be09c7669a79..ca217a6f488f 100644
--- a/net/ipv4/cipso_ipv4.c
+++ b/net/ipv4/cipso_ipv4.c
@@ -472,6 +472,7 @@ void cipso_v4_doi_free(struct cipso_v4_doi *doi_def)
kfree(doi_def->map.std->lvl.local);
kfree(doi_def->map.std->cat.cipso);
kfree(doi_def->map.std->cat.local);
+ kfree(doi_def->map.std);
break;
}
kfree(doi_def);
--
2.30.2
From: Florian Westphal <[email protected]>
[ Upstream commit 12f36e9bf678a81d030ca1b693dcda62b55af7c5 ]
The ip6tables rpfilter match has an extra check to skip packets with
"::" source address.
Extend this to ipv6 fib expression. Else ipv6 duplicate address detection
packets will fail rpf route check -- lookup returns -ENETUNREACH.
While at it, extend the prerouting check to also cover the ingress hook.
Closes: https://bugzilla.netfilter.org/show_bug.cgi?id=1543
Fixes: f6d0cbcf09c5 ("netfilter: nf_tables: add fib expression")
Signed-off-by: Florian Westphal <[email protected]>
Signed-off-by: Pablo Neira Ayuso <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/ipv6/netfilter/nft_fib_ipv6.c | 22 ++++++++++++++++++----
1 file changed, 18 insertions(+), 4 deletions(-)
diff --git a/net/ipv6/netfilter/nft_fib_ipv6.c b/net/ipv6/netfilter/nft_fib_ipv6.c
index e204163c7036..92f3235fa287 100644
--- a/net/ipv6/netfilter/nft_fib_ipv6.c
+++ b/net/ipv6/netfilter/nft_fib_ipv6.c
@@ -135,6 +135,17 @@ void nft_fib6_eval_type(const struct nft_expr *expr, struct nft_regs *regs,
}
EXPORT_SYMBOL_GPL(nft_fib6_eval_type);
+static bool nft_fib_v6_skip_icmpv6(const struct sk_buff *skb, u8 next, const struct ipv6hdr *iph)
+{
+ if (likely(next != IPPROTO_ICMPV6))
+ return false;
+
+ if (ipv6_addr_type(&iph->saddr) != IPV6_ADDR_ANY)
+ return false;
+
+ return ipv6_addr_type(&iph->daddr) & IPV6_ADDR_LINKLOCAL;
+}
+
void nft_fib6_eval(const struct nft_expr *expr, struct nft_regs *regs,
const struct nft_pktinfo *pkt)
{
@@ -163,10 +174,13 @@ void nft_fib6_eval(const struct nft_expr *expr, struct nft_regs *regs,
lookup_flags = nft_fib6_flowi_init(&fl6, priv, pkt, oif, iph);
- if (nft_hook(pkt) == NF_INET_PRE_ROUTING &&
- nft_fib_is_loopback(pkt->skb, nft_in(pkt))) {
- nft_fib_store_result(dest, priv, nft_in(pkt));
- return;
+ if (nft_hook(pkt) == NF_INET_PRE_ROUTING ||
+ nft_hook(pkt) == NF_INET_INGRESS) {
+ if (nft_fib_is_loopback(pkt->skb, nft_in(pkt)) ||
+ nft_fib_v6_skip_icmpv6(pkt->skb, pkt->tprot, iph)) {
+ nft_fib_store_result(dest, priv, nft_in(pkt));
+ return;
+ }
}
*dest = 0;
--
2.30.2
From: Marcelo Ricardo Leitner <[email protected]>
[ Upstream commit 13c62f5371e3eb4fc3400cfa26e64ca75f888008 ]
This this the counterpart of 8aa7b526dc0b ("openvswitch: handle DNAT
tuple collision") for act_ct. From that commit changelog:
"""
With multiple DNAT rules it's possible that after destination
translation the resulting tuples collide.
...
Netfilter handles this case by allocating a null binding for SNAT at
egress by default. Perform the same operation in openvswitch for DNAT
if no explicit SNAT is requested by the user and allocate a null binding
for SNAT for packets in the "original" direction.
"""
Fixes: 95219afbb980 ("act_ct: support asymmetric conntrack")
Signed-off-by: Marcelo Ricardo Leitner <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/sched/act_ct.c | 21 +++++++++++++--------
1 file changed, 13 insertions(+), 8 deletions(-)
diff --git a/net/sched/act_ct.c b/net/sched/act_ct.c
index 315a5b2f3add..7ef074c6dd16 100644
--- a/net/sched/act_ct.c
+++ b/net/sched/act_ct.c
@@ -900,14 +900,19 @@ static int tcf_ct_act_nat(struct sk_buff *skb,
}
err = ct_nat_execute(skb, ct, ctinfo, range, maniptype);
- if (err == NF_ACCEPT &&
- ct->status & IPS_SRC_NAT && ct->status & IPS_DST_NAT) {
- if (maniptype == NF_NAT_MANIP_SRC)
- maniptype = NF_NAT_MANIP_DST;
- else
- maniptype = NF_NAT_MANIP_SRC;
-
- err = ct_nat_execute(skb, ct, ctinfo, range, maniptype);
+ if (err == NF_ACCEPT && ct->status & IPS_DST_NAT) {
+ if (ct->status & IPS_SRC_NAT) {
+ if (maniptype == NF_NAT_MANIP_SRC)
+ maniptype = NF_NAT_MANIP_DST;
+ else
+ maniptype = NF_NAT_MANIP_SRC;
+
+ err = ct_nat_execute(skb, ct, ctinfo, range,
+ maniptype);
+ } else if (CTINFO2DIR(ctinfo) == IP_CT_DIR_ORIGINAL) {
+ err = ct_nat_execute(skb, ct, ctinfo, NULL,
+ NF_NAT_MANIP_SRC);
+ }
}
return err;
#else
--
2.30.2
From: Zhen Lei <[email protected]>
[ Upstream commit 17866bc6b2ae1c3075c9fe7bcbeb8ea50eb4c3fc ]
Fix to return a negative error code from the error handling case instead
of 0, as done elsewhere in the function where it is.
Fixes: 7fdf9b05c73b ("dmaengine: fsl-dpaa2-qdma: Add NXP dpaa2 qDMA controller driver for Layerscape SoCs")
Reported-by: Hulk Robot <[email protected]>
Signed-off-by: Zhen Lei <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Vinod Koul <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/dma/fsl-dpaa2-qdma/dpaa2-qdma.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/dma/fsl-dpaa2-qdma/dpaa2-qdma.c b/drivers/dma/fsl-dpaa2-qdma/dpaa2-qdma.c
index 4ec909e0b810..4ae057922ef1 100644
--- a/drivers/dma/fsl-dpaa2-qdma/dpaa2-qdma.c
+++ b/drivers/dma/fsl-dpaa2-qdma/dpaa2-qdma.c
@@ -332,6 +332,7 @@ static int __cold dpaa2_qdma_setup(struct fsl_mc_device *ls_dev)
}
if (priv->dpdmai_attr.version.major > DPDMAI_VER_MAJOR) {
+ err = -EINVAL;
dev_err(dev, "DPDMAI major version mismatch\n"
"Found %u.%u, supported version is %u.%u\n",
priv->dpdmai_attr.version.major,
@@ -341,6 +342,7 @@ static int __cold dpaa2_qdma_setup(struct fsl_mc_device *ls_dev)
}
if (priv->dpdmai_attr.version.minor > DPDMAI_VER_MINOR) {
+ err = -EINVAL;
dev_err(dev, "DPDMAI minor version mismatch\n"
"Found %u.%u, supported version is %u.%u\n",
priv->dpdmai_attr.version.major,
@@ -475,6 +477,7 @@ static int __cold dpaa2_qdma_dpio_setup(struct dpaa2_qdma_priv *priv)
ppriv->store =
dpaa2_io_store_create(DPAA2_QDMA_STORE_SIZE, dev);
if (!ppriv->store) {
+ err = -ENOMEM;
dev_err(dev, "dpaa2_io_store_create() failed\n");
goto err_store;
}
--
2.30.2
From: Maxim Mikityanskiy <[email protected]>
[ Upstream commit 07718be265680dcf496347d475ce1a5442f55ad7 ]
The TCP option parser in mptcp (mptcp_get_options) could read one byte
out of bounds. When the length is 1, the execution flow gets into the
loop, reads one byte of the opcode, and if the opcode is neither
TCPOPT_EOL nor TCPOPT_NOP, it reads one more byte, which exceeds the
length of 1.
This fix is inspired by commit 9609dad263f8 ("ipv4: tcp_input: fix stack
out of bounds when parsing TCP options.").
Cc: Young Xiao <[email protected]>
Fixes: cec37a6e41aa ("mptcp: Handle MP_CAPABLE options for outgoing connections")
Signed-off-by: Maxim Mikityanskiy <[email protected]>
Reviewed-by: Mat Martineau <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/mptcp/options.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/net/mptcp/options.c b/net/mptcp/options.c
index 91034a221983..ac0233c9cd34 100644
--- a/net/mptcp/options.c
+++ b/net/mptcp/options.c
@@ -314,6 +314,8 @@ void mptcp_get_options(const struct sk_buff *skb,
length--;
continue;
default:
+ if (length < 2)
+ return;
opsize = *ptr++;
if (opsize < 2) /* "silly options" */
return;
--
2.30.2
From: Maxim Mikityanskiy <[email protected]>
[ Upstream commit 5fc177ab759418c9537433e63301096e733fb915 ]
The TCP option parser in synproxy (synproxy_parse_options) could read
one byte out of bounds. When the length is 1, the execution flow gets
into the loop, reads one byte of the opcode, and if the opcode is
neither TCPOPT_EOL nor TCPOPT_NOP, it reads one more byte, which exceeds
the length of 1.
This fix is inspired by commit 9609dad263f8 ("ipv4: tcp_input: fix stack
out of bounds when parsing TCP options.").
v2 changes:
Added an early return when length < 0 to avoid calling
skb_header_pointer with negative length.
Cc: Young Xiao <[email protected]>
Fixes: 48b1de4c110a ("netfilter: add SYNPROXY core/target")
Signed-off-by: Maxim Mikityanskiy <[email protected]>
Reviewed-by: Florian Westphal <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/netfilter/nf_synproxy_core.c | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/net/netfilter/nf_synproxy_core.c b/net/netfilter/nf_synproxy_core.c
index d7d34a62d3bf..2fc4ae960769 100644
--- a/net/netfilter/nf_synproxy_core.c
+++ b/net/netfilter/nf_synproxy_core.c
@@ -31,6 +31,9 @@ synproxy_parse_options(const struct sk_buff *skb, unsigned int doff,
int length = (th->doff * 4) - sizeof(*th);
u8 buf[40], *ptr;
+ if (unlikely(length < 0))
+ return false;
+
ptr = skb_header_pointer(skb, doff + sizeof(*th), length, buf);
if (ptr == NULL)
return false;
@@ -47,6 +50,8 @@ synproxy_parse_options(const struct sk_buff *skb, unsigned int doff,
length--;
continue;
default:
+ if (length < 2)
+ return true;
opsize = *ptr++;
if (opsize < 2)
return true;
--
2.30.2
From: Huy Nguyen <[email protected]>
[ Upstream commit 8ad893e516a77209a1818a2072d2027d87db809f ]
Currently, IPsec feature is disabled because mlx5e_build_nic_netdev
is required to be called after mlx5e_ipsec_init. This requirement is
invalid as mlx5e_build_nic_netdev and mlx5e_ipsec_init initialize
independent resources.
Remove ipsec pointer check in mlx5e_build_nic_netdev so that the
two functions can be called at any order.
Fixes: 547eede070eb ("net/mlx5e: IPSec, Innova IPSec offload infrastructure")
Signed-off-by: Huy Nguyen <[email protected]>
Reviewed-by: Raed Salem <[email protected]>
Signed-off-by: Saeed Mahameed <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/mellanox/mlx5/core/en_accel/ipsec.c | 3 ---
1 file changed, 3 deletions(-)
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_accel/ipsec.c b/drivers/net/ethernet/mellanox/mlx5/core/en_accel/ipsec.c
index 3d45341e2216..26f7fab109d9 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en_accel/ipsec.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_accel/ipsec.c
@@ -532,9 +532,6 @@ void mlx5e_ipsec_build_netdev(struct mlx5e_priv *priv)
struct mlx5_core_dev *mdev = priv->mdev;
struct net_device *netdev = priv->netdev;
- if (!priv->ipsec)
- return;
-
if (!(mlx5_accel_ipsec_device_caps(mdev) & MLX5_ACCEL_IPSEC_CAP_ESP) ||
!MLX5_CAP_ETH(mdev, swp)) {
mlx5_core_dbg(mdev, "mlx5e: ESP and SWP offload not supported\n");
--
2.30.2
From: Maciej Fijalkowski <[email protected]>
[ Upstream commit 2e84f6b3773f43263124c76499c0c4ec3f40aa9b ]
Commit ae15e0ba1b33 ("ice: Change number of XDP Tx queues to match
number of Rx queues") tried to address the incorrect setting of XDP
queue count that was based on the Tx queue count, whereas in theory we
should provide the XDP queue per Rx queue. However, the routines that
setup and destroy the set of Tx resources are still based on the
vsi->num_txq.
Ice supports the asynchronous Tx/Rx queue count, so for a setup where
vsi->num_txq > vsi->num_rxq, ice_vsi_stop_tx_rings and ice_vsi_cfg_txqs
will be accessing the vsi->xdp_rings out of the bounds.
Parameterize two mentioned functions so they get the size of Tx resources
array as the input.
Fixes: ae15e0ba1b33 ("ice: Change number of XDP Tx queues to match number of Rx queues")
Signed-off-by: Maciej Fijalkowski <[email protected]>
Tested-by: Kiran Bhandare <[email protected]>
Signed-off-by: Tony Nguyen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/intel/ice/ice_lib.c | 18 ++++++++++--------
1 file changed, 10 insertions(+), 8 deletions(-)
diff --git a/drivers/net/ethernet/intel/ice/ice_lib.c b/drivers/net/ethernet/intel/ice/ice_lib.c
index fb20c6971f4c..dc944d605a74 100644
--- a/drivers/net/ethernet/intel/ice/ice_lib.c
+++ b/drivers/net/ethernet/intel/ice/ice_lib.c
@@ -1705,12 +1705,13 @@ setup_rings:
* ice_vsi_cfg_txqs - Configure the VSI for Tx
* @vsi: the VSI being configured
* @rings: Tx ring array to be configured
+ * @count: number of Tx ring array elements
*
* Return 0 on success and a negative value on error
* Configure the Tx VSI for operation.
*/
static int
-ice_vsi_cfg_txqs(struct ice_vsi *vsi, struct ice_ring **rings)
+ice_vsi_cfg_txqs(struct ice_vsi *vsi, struct ice_ring **rings, u16 count)
{
struct ice_aqc_add_tx_qgrp *qg_buf;
u16 q_idx = 0;
@@ -1722,7 +1723,7 @@ ice_vsi_cfg_txqs(struct ice_vsi *vsi, struct ice_ring **rings)
qg_buf->num_txqs = 1;
- for (q_idx = 0; q_idx < vsi->num_txq; q_idx++) {
+ for (q_idx = 0; q_idx < count; q_idx++) {
err = ice_vsi_cfg_txq(vsi, rings[q_idx], qg_buf);
if (err)
goto err_cfg_txqs;
@@ -1742,7 +1743,7 @@ err_cfg_txqs:
*/
int ice_vsi_cfg_lan_txqs(struct ice_vsi *vsi)
{
- return ice_vsi_cfg_txqs(vsi, vsi->tx_rings);
+ return ice_vsi_cfg_txqs(vsi, vsi->tx_rings, vsi->num_txq);
}
/**
@@ -1757,7 +1758,7 @@ int ice_vsi_cfg_xdp_txqs(struct ice_vsi *vsi)
int ret;
int i;
- ret = ice_vsi_cfg_txqs(vsi, vsi->xdp_rings);
+ ret = ice_vsi_cfg_txqs(vsi, vsi->xdp_rings, vsi->num_xdp_txq);
if (ret)
return ret;
@@ -1955,17 +1956,18 @@ int ice_vsi_stop_all_rx_rings(struct ice_vsi *vsi)
* @rst_src: reset source
* @rel_vmvf_num: Relative ID of VF/VM
* @rings: Tx ring array to be stopped
+ * @count: number of Tx ring array elements
*/
static int
ice_vsi_stop_tx_rings(struct ice_vsi *vsi, enum ice_disq_rst_src rst_src,
- u16 rel_vmvf_num, struct ice_ring **rings)
+ u16 rel_vmvf_num, struct ice_ring **rings, u16 count)
{
u16 q_idx;
if (vsi->num_txq > ICE_LAN_TXQ_MAX_QDIS)
return -EINVAL;
- for (q_idx = 0; q_idx < vsi->num_txq; q_idx++) {
+ for (q_idx = 0; q_idx < count; q_idx++) {
struct ice_txq_meta txq_meta = { };
int status;
@@ -1993,7 +1995,7 @@ int
ice_vsi_stop_lan_tx_rings(struct ice_vsi *vsi, enum ice_disq_rst_src rst_src,
u16 rel_vmvf_num)
{
- return ice_vsi_stop_tx_rings(vsi, rst_src, rel_vmvf_num, vsi->tx_rings);
+ return ice_vsi_stop_tx_rings(vsi, rst_src, rel_vmvf_num, vsi->tx_rings, vsi->num_txq);
}
/**
@@ -2002,7 +2004,7 @@ ice_vsi_stop_lan_tx_rings(struct ice_vsi *vsi, enum ice_disq_rst_src rst_src,
*/
int ice_vsi_stop_xdp_tx_rings(struct ice_vsi *vsi)
{
- return ice_vsi_stop_tx_rings(vsi, ICE_NO_RESET, 0, vsi->xdp_rings);
+ return ice_vsi_stop_tx_rings(vsi, ICE_NO_RESET, 0, vsi->xdp_rings, vsi->num_xdp_txq);
}
/**
--
2.30.2
From: Maciej Fijalkowski <[email protected]>
[ Upstream commit ebc5399ea1dfcddac31974091086a3379141899b ]
ice driver requires a programmable pipeline firmware package in order to
have a support for advanced features. Otherwise, driver falls back to so
called 'safe mode'. For that mode, ndo_bpf callback is not exposed and
when user tries to load XDP program, the following happens:
$ sudo ./xdp1 enp179s0f1
libbpf: Kernel error message: Underlying driver does not support XDP in native mode
link set xdp fd failed
which is sort of confusing, as there is a native XDP support, but not in
the current mode. Improve the user experience by providing the specific
ndo_bpf callback dedicated for safe mode which will make use of extack
to explicitly let the user know that the DDP package is missing and
that's the reason that the XDP can't be loaded onto interface currently.
Cc: Jamal Hadi Salim <[email protected]>
Fixes: efc2214b6047 ("ice: Add support for XDP")
Signed-off-by: Maciej Fijalkowski <[email protected]>
Tested-by: Kiran Bhandare <[email protected]>
Signed-off-by: Tony Nguyen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/intel/ice/ice_main.c | 15 +++++++++++++++
1 file changed, 15 insertions(+)
diff --git a/drivers/net/ethernet/intel/ice/ice_main.c b/drivers/net/ethernet/intel/ice/ice_main.c
index 6f30aad7695f..1567ddd4c5b8 100644
--- a/drivers/net/ethernet/intel/ice/ice_main.c
+++ b/drivers/net/ethernet/intel/ice/ice_main.c
@@ -2539,6 +2539,20 @@ ice_xdp_setup_prog(struct ice_vsi *vsi, struct bpf_prog *prog,
return (ret || xdp_ring_err) ? -ENOMEM : 0;
}
+/**
+ * ice_xdp_safe_mode - XDP handler for safe mode
+ * @dev: netdevice
+ * @xdp: XDP command
+ */
+static int ice_xdp_safe_mode(struct net_device __always_unused *dev,
+ struct netdev_bpf *xdp)
+{
+ NL_SET_ERR_MSG_MOD(xdp->extack,
+ "Please provide working DDP firmware package in order to use XDP\n"
+ "Refer to Documentation/networking/device_drivers/ethernet/intel/ice.rst");
+ return -EOPNOTSUPP;
+}
+
/**
* ice_xdp - implements XDP handler
* @dev: netdevice
@@ -6786,6 +6800,7 @@ static const struct net_device_ops ice_netdev_safe_mode_ops = {
.ndo_change_mtu = ice_change_mtu,
.ndo_get_stats64 = ice_get_stats64,
.ndo_tx_timeout = ice_tx_timeout,
+ .ndo_bpf = ice_xdp_safe_mode,
};
static const struct net_device_ops ice_netdev_ops = {
--
2.30.2
From: Maor Gottlieb <[email protected]>
[ Upstream commit 4aaf96ac8b45d8e2e019b6b53cce65a73c4ace2c ]
SW steering uses RC QP to write/read to/from ICM, hence it's not
supported when RoCE is not supported as well.
Fixes: 70605ea545e8 ("net/mlx5: DR, Expose APIs for direct rule managing")
Signed-off-by: Maor Gottlieb <[email protected]>
Reviewed-by: Alex Vesker <[email protected]>
Reviewed-by: Yevgeny Kliteynik <[email protected]>
Signed-off-by: Saeed Mahameed <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
.../net/ethernet/mellanox/mlx5/core/steering/mlx5dr.h | 9 +++++----
1 file changed, 5 insertions(+), 4 deletions(-)
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/steering/mlx5dr.h b/drivers/net/ethernet/mellanox/mlx5/core/steering/mlx5dr.h
index 6f3db8dc896c..454968ba6831 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/steering/mlx5dr.h
+++ b/drivers/net/ethernet/mellanox/mlx5/core/steering/mlx5dr.h
@@ -124,10 +124,11 @@ int mlx5dr_action_destroy(struct mlx5dr_action *action);
static inline bool
mlx5dr_is_supported(struct mlx5_core_dev *dev)
{
- return MLX5_CAP_ESW_FLOWTABLE_FDB(dev, sw_owner) ||
- (MLX5_CAP_ESW_FLOWTABLE_FDB(dev, sw_owner_v2) &&
- (MLX5_CAP_GEN(dev, steering_format_version) <=
- MLX5_STEERING_FORMAT_CONNECTX_6DX));
+ return MLX5_CAP_GEN(dev, roce) &&
+ (MLX5_CAP_ESW_FLOWTABLE_FDB(dev, sw_owner) ||
+ (MLX5_CAP_ESW_FLOWTABLE_FDB(dev, sw_owner_v2) &&
+ (MLX5_CAP_GEN(dev, steering_format_version) <=
+ MLX5_STEERING_FORMAT_CONNECTX_6DX)));
}
#endif /* _MLX5DR_H_ */
--
2.30.2
From: Ido Schimmel <[email protected]>
[ Upstream commit d2e381c4963663bca6f30c3b996fa4dbafe8fcb5 ]
Cited commit started returning errors when notification info is not
filled by the bridge driver, resulting in the following regression:
# ip link add name br1 type bridge vlan_filtering 1
# bridge vlan add dev br1 vid 555 self pvid untagged
RTNETLINK answers: Invalid argument
As long as the bridge driver does not fill notification info for the
bridge device itself, an empty notification should not be considered as
an error. This is explained in commit 59ccaaaa49b5 ("bridge: dont send
notification when skb->len == 0 in rtnl_bridge_notify").
Fix by removing the error and add a comment to avoid future bugs.
Fixes: a8db57c1d285 ("rtnetlink: Fix missing error code in rtnl_bridge_notify()")
Signed-off-by: Ido Schimmel <[email protected]>
Reviewed-by: Nikolay Aleksandrov <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/core/rtnetlink.c | 8 +++++---
1 file changed, 5 insertions(+), 3 deletions(-)
diff --git a/net/core/rtnetlink.c b/net/core/rtnetlink.c
index 83894723ebee..dd4659246405 100644
--- a/net/core/rtnetlink.c
+++ b/net/core/rtnetlink.c
@@ -4842,10 +4842,12 @@ static int rtnl_bridge_notify(struct net_device *dev)
if (err < 0)
goto errout;
- if (!skb->len) {
- err = -EINVAL;
+ /* Notification info is only filled for bridge ports, not the bridge
+ * device itself. Therefore, a zero notification length is valid and
+ * should not result in an error.
+ */
+ if (!skb->len)
goto errout;
- }
rtnl_notify(skb, net, 0, RTNLGRP_LINK, NULL, GFP_ATOMIC);
return 0;
--
2.30.2
From: Maxim Mikityanskiy <[email protected]>
[ Upstream commit ba91c49dedbde758ba0b72f57ac90b06ddf8e548 ]
The TCP option parser in cake qdisc (cake_get_tcpopt and
cake_tcph_may_drop) could read one byte out of bounds. When the length
is 1, the execution flow gets into the loop, reads one byte of the
opcode, and if the opcode is neither TCPOPT_EOL nor TCPOPT_NOP, it reads
one more byte, which exceeds the length of 1.
This fix is inspired by commit 9609dad263f8 ("ipv4: tcp_input: fix stack
out of bounds when parsing TCP options.").
v2 changes:
Added doff validation in cake_get_tcphdr to avoid parsing garbage as TCP
header. Although it wasn't strictly an out-of-bounds access (memory was
allocated), garbage values could be read where CAKE expected the TCP
header if doff was smaller than 5.
Cc: Young Xiao <[email protected]>
Fixes: 8b7138814f29 ("sch_cake: Add optional ACK filter")
Signed-off-by: Maxim Mikityanskiy <[email protected]>
Acked-by: Toke Høiland-Jørgensen <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/sched/sch_cake.c | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
diff --git a/net/sched/sch_cake.c b/net/sched/sch_cake.c
index 7d37638ee1c7..5c15968b5155 100644
--- a/net/sched/sch_cake.c
+++ b/net/sched/sch_cake.c
@@ -943,7 +943,7 @@ static struct tcphdr *cake_get_tcphdr(const struct sk_buff *skb,
}
tcph = skb_header_pointer(skb, offset, sizeof(_tcph), &_tcph);
- if (!tcph)
+ if (!tcph || tcph->doff < 5)
return NULL;
return skb_header_pointer(skb, offset,
@@ -967,6 +967,8 @@ static const void *cake_get_tcpopt(const struct tcphdr *tcph,
length--;
continue;
}
+ if (length < 2)
+ break;
opsize = *ptr++;
if (opsize < 2 || opsize > length)
break;
@@ -1104,6 +1106,8 @@ static bool cake_tcph_may_drop(const struct tcphdr *tcph,
length--;
continue;
}
+ if (length < 2)
+ break;
opsize = *ptr++;
if (opsize < 2 || opsize > length)
break;
--
2.30.2
From: Quanyang Wang <[email protected]>
[ Upstream commit 538ea65a9fd1194352a41313bff876b74b5d90c5 ]
In some scenarios (kdump), dpdma hardware irqs has been enabled when
calling request_irq in probe function, and then the dpdma irq handler
xilinx_dpdma_irq_handler is invoked to access xdev->chan[i]. But at
this moment xdev->chan[i] hasn't been initialized.
We should ensure the dpdma controller to be in a consistent and
clean state before further initialization. So add dpdma_hw_init()
to do this.
Furthermore, in xilinx_dpdma_disable_irq, disable all interrupts
instead of error interrupts.
This patch is to fix the kdump kernel crash as below:
[ 3.696128] Unable to handle kernel NULL pointer dereference at virtual address 000000000000012c
[ 3.696710] xilinx-zynqmp-dpdma fd4c0000.dma-controller: Xilinx DPDMA engine is probed
[ 3.704900] Mem abort info:
[ 3.704902] ESR = 0x96000005
[ 3.704905] EC = 0x25: DABT (current EL), IL = 32 bits
[ 3.704907] SET = 0, FnV = 0
[ 3.704912] EA = 0, S1PTW = 0
[ 3.713800] ahci-ceva fd0c0000.ahci: supply ahci not found, using dummy regulator
[ 3.715585] Data abort info:
[ 3.715587] ISV = 0, ISS = 0x00000005
[ 3.715589] CM = 0, WnR = 0
[ 3.715592] [000000000000012c] user address but active_mm is swapper
[ 3.715596] Internal error: Oops: 96000005 [#1] SMP
[ 3.715599] Modules linked in:
[ 3.715608] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.10.0-12170-g60894882155f-dirty #77
[ 3.723937] Hardware name: ZynqMP ZCU102 Rev1.0 (DT)
[ 3.723942] pstate: 80000085 (Nzcv daIf -PAN -UAO -TCO BTYPE=--)
[ 3.723956] pc : xilinx_dpdma_irq_handler+0x418/0x560
[ 3.793049] lr : xilinx_dpdma_irq_handler+0x3d8/0x560
[ 3.798089] sp : ffffffc01186bdf0
[ 3.801388] x29: ffffffc01186bdf0 x28: ffffffc011836f28
[ 3.806692] x27: ffffff8023e0ac80 x26: 0000000000000080
[ 3.811996] x25: 0000000008000408 x24: 0000000000000003
[ 3.817300] x23: ffffffc01186be70 x22: ffffffc011291740
[ 3.822604] x21: 0000000000000000 x20: 0000000008000408
[ 3.827908] x19: 0000000000000000 x18: 0000000000000010
[ 3.833212] x17: 0000000000000000 x16: 0000000000000000
[ 3.838516] x15: 0000000000000000 x14: ffffffc011291740
[ 3.843820] x13: ffffffc02eb4d000 x12: 0000000034d4d91d
[ 3.849124] x11: 0000000000000040 x10: ffffffc0112d2d48
[ 3.854428] x9 : ffffffc0112d2d40 x8 : ffffff8021c00268
[ 3.859732] x7 : 0000000000000000 x6 : ffffffc011836000
[ 3.865036] x5 : 0000000000000003 x4 : 0000000000000000
[ 3.870340] x3 : 0000000000000001 x2 : 0000000000000000
[ 3.875644] x1 : 0000000000000000 x0 : 000000000000012c
[ 3.880948] Call trace:
[ 3.883382] xilinx_dpdma_irq_handler+0x418/0x560
[ 3.888079] __handle_irq_event_percpu+0x5c/0x178
[ 3.892774] handle_irq_event_percpu+0x34/0x98
[ 3.897210] handle_irq_event+0x44/0xb8
[ 3.901030] handle_fasteoi_irq+0xd0/0x190
[ 3.905117] generic_handle_irq+0x30/0x48
[ 3.909111] __handle_domain_irq+0x64/0xc0
[ 3.913192] gic_handle_irq+0x78/0xa0
[ 3.916846] el1_irq+0xc4/0x180
[ 3.919982] cpuidle_enter_state+0x134/0x2f8
[ 3.924243] cpuidle_enter+0x38/0x50
[ 3.927810] call_cpuidle+0x1c/0x40
[ 3.931290] do_idle+0x20c/0x270
[ 3.934502] cpu_startup_entry+0x28/0x58
[ 3.938410] rest_init+0xbc/0xcc
[ 3.941631] arch_call_rest_init+0x10/0x1c
[ 3.945718] start_kernel+0x51c/0x558
Fixes: 7cbb0c63de3f ("dmaengine: xilinx: dpdma: Add the Xilinx DisplayPort DMA engine driver")
Signed-off-by: Quanyang Wang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Vinod Koul <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/dma/xilinx/xilinx_dpdma.c | 24 +++++++++++++++++++++++-
1 file changed, 23 insertions(+), 1 deletion(-)
diff --git a/drivers/dma/xilinx/xilinx_dpdma.c b/drivers/dma/xilinx/xilinx_dpdma.c
index 70b29bd079c9..ff7dfb3fdeb4 100644
--- a/drivers/dma/xilinx/xilinx_dpdma.c
+++ b/drivers/dma/xilinx/xilinx_dpdma.c
@@ -1459,7 +1459,7 @@ static void xilinx_dpdma_enable_irq(struct xilinx_dpdma_device *xdev)
*/
static void xilinx_dpdma_disable_irq(struct xilinx_dpdma_device *xdev)
{
- dpdma_write(xdev->reg, XILINX_DPDMA_IDS, XILINX_DPDMA_INTR_ERR_ALL);
+ dpdma_write(xdev->reg, XILINX_DPDMA_IDS, XILINX_DPDMA_INTR_ALL);
dpdma_write(xdev->reg, XILINX_DPDMA_EIDS, XILINX_DPDMA_EINTR_ALL);
}
@@ -1596,6 +1596,26 @@ static struct dma_chan *of_dma_xilinx_xlate(struct of_phandle_args *dma_spec,
return dma_get_slave_channel(&xdev->chan[chan_id]->vchan.chan);
}
+static void dpdma_hw_init(struct xilinx_dpdma_device *xdev)
+{
+ unsigned int i;
+ void __iomem *reg;
+
+ /* Disable all interrupts */
+ xilinx_dpdma_disable_irq(xdev);
+
+ /* Stop all channels */
+ for (i = 0; i < ARRAY_SIZE(xdev->chan); i++) {
+ reg = xdev->reg + XILINX_DPDMA_CH_BASE
+ + XILINX_DPDMA_CH_OFFSET * i;
+ dpdma_clr(reg, XILINX_DPDMA_CH_CNTL, XILINX_DPDMA_CH_CNTL_ENABLE);
+ }
+
+ /* Clear the interrupt status registers */
+ dpdma_write(xdev->reg, XILINX_DPDMA_ISR, XILINX_DPDMA_INTR_ALL);
+ dpdma_write(xdev->reg, XILINX_DPDMA_EISR, XILINX_DPDMA_EINTR_ALL);
+}
+
static int xilinx_dpdma_probe(struct platform_device *pdev)
{
struct xilinx_dpdma_device *xdev;
@@ -1622,6 +1642,8 @@ static int xilinx_dpdma_probe(struct platform_device *pdev)
if (IS_ERR(xdev->reg))
return PTR_ERR(xdev->reg);
+ dpdma_hw_init(xdev);
+
xdev->irq = platform_get_irq(pdev, 0);
if (xdev->irq < 0) {
dev_err(xdev->dev, "failed to get platform irq\n");
--
2.30.2
From: Aya Levin <[email protected]>
[ Upstream commit 6d6727dddc7f93fcc155cb8d0c49c29ae0e71122 ]
The device is able to offload either the outer header csum or inner
header csum. The driver utilizes the inner csum offload. Hence, block
setting of tx-udp_tnl-csum-segmentation and set it to off[fixed].
Fixes: b49663c8fb49 ("net/mlx5e: Add support for UDP tunnel segmentation with outer checksum offload")
Signed-off-by: Aya Levin <[email protected]>
Reviewed-by: Tariq Toukan <[email protected]>
Signed-off-by: Saeed Mahameed <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/mellanox/mlx5/core/en_main.c | 10 +++-------
1 file changed, 3 insertions(+), 7 deletions(-)
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c
index f18b52be32e9..d81fa8e56199 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c
@@ -4958,13 +4958,9 @@ static void mlx5e_build_nic_netdev(struct net_device *netdev)
}
if (mlx5_vxlan_allowed(mdev->vxlan) || mlx5_geneve_tx_allowed(mdev)) {
- netdev->hw_features |= NETIF_F_GSO_UDP_TUNNEL |
- NETIF_F_GSO_UDP_TUNNEL_CSUM;
- netdev->hw_enc_features |= NETIF_F_GSO_UDP_TUNNEL |
- NETIF_F_GSO_UDP_TUNNEL_CSUM;
- netdev->gso_partial_features = NETIF_F_GSO_UDP_TUNNEL_CSUM;
- netdev->vlan_features |= NETIF_F_GSO_UDP_TUNNEL |
- NETIF_F_GSO_UDP_TUNNEL_CSUM;
+ netdev->hw_features |= NETIF_F_GSO_UDP_TUNNEL;
+ netdev->hw_enc_features |= NETIF_F_GSO_UDP_TUNNEL;
+ netdev->vlan_features |= NETIF_F_GSO_UDP_TUNNEL;
}
if (mlx5e_tunnel_proto_supported(mdev, IPPROTO_GRE)) {
--
2.30.2
From: Randy Dunlap <[email protected]>
[ Upstream commit 0cfbb589d67f16fa55b26ae02b69c31b52e344b1 ]
When CONFIG_HAS_IOMEM is not set/enabled, certain iomap() family
functions [including ioremap(), devm_ioremap(), etc.] are not
available.
Drivers that use these functions should depend on HAS_IOMEM so that
they do not cause build errors.
Rectifies these build errors:
s390-linux-ld: drivers/dma/qcom/hidma_mgmt.o: in function `hidma_mgmt_probe':
hidma_mgmt.c:(.text+0x780): undefined reference to `devm_ioremap_resource'
s390-linux-ld: drivers/dma/qcom/hidma_mgmt.o: in function `hidma_mgmt_init':
hidma_mgmt.c:(.init.text+0x126): undefined reference to `of_address_to_resource'
s390-linux-ld: hidma_mgmt.c:(.init.text+0x16e): undefined reference to `of_address_to_resource'
Fixes: 67a2003e0607 ("dmaengine: add Qualcomm Technologies HIDMA channel driver")
Signed-off-by: Randy Dunlap <[email protected]>
Reported-by: kernel test robot <[email protected]>
Cc: Sinan Kaya <[email protected]>
Cc: Vinod Koul <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Vinod Koul <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/dma/qcom/Kconfig | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/dma/qcom/Kconfig b/drivers/dma/qcom/Kconfig
index 3bcb689162c6..ef038f3c5e32 100644
--- a/drivers/dma/qcom/Kconfig
+++ b/drivers/dma/qcom/Kconfig
@@ -10,6 +10,7 @@ config QCOM_BAM_DMA
config QCOM_HIDMA_MGMT
tristate "Qualcomm Technologies HIDMA Management support"
+ depends on HAS_IOMEM
select DMA_ENGINE
help
Enable support for the Qualcomm Technologies HIDMA Management.
--
2.30.2
From: Dima Chumak <[email protected]>
[ Upstream commit a3e5fd9314dfc4314a9567cde96e1aef83a7458a ]
When adding a hairpin flow, a firmware-side send queue is created for
the peer net device, which claims some host memory pages for its
internal ring buffer. If the peer net device is removed/unbound before
the hairpin flow is deleted, then the send queue is not destroyed which
leads to a stack trace on pci device remove:
[ 748.005230] mlx5_core 0000:08:00.2: wait_func:1094:(pid 12985): MANAGE_PAGES(0x108) timeout. Will cause a leak of a command resource
[ 748.005231] mlx5_core 0000:08:00.2: reclaim_pages:514:(pid 12985): failed reclaiming pages: err -110
[ 748.001835] mlx5_core 0000:08:00.2: mlx5_reclaim_root_pages:653:(pid 12985): failed reclaiming pages (-110) for func id 0x0
[ 748.002171] ------------[ cut here ]------------
[ 748.001177] FW pages counter is 4 after reclaiming all pages
[ 748.001186] WARNING: CPU: 1 PID: 12985 at drivers/net/ethernet/mellanox/mlx5/core/pagealloc.c:685 mlx5_reclaim_startup_pages+0x34b/0x460 [mlx5_core] [ +0.002771] Modules linked in: cls_flower mlx5_ib mlx5_core ptp pps_core act_mirred sch_ingress openvswitch nsh xt_conntrack xt_MASQUERADE nf_conntrack_netlink nfnetlink xt_addrtype iptable_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 br_netfilter rpcrdma rdma_ucm ib_iser libiscsi scsi_transport_iscsi rdma_cm ib_umad ib_ipoib iw_cm ib_cm ib_uverbs ib_core overlay fuse [last unloaded: pps_core]
[ 748.007225] CPU: 1 PID: 12985 Comm: tee Not tainted 5.12.0+ #1
[ 748.001376] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
[ 748.002315] RIP: 0010:mlx5_reclaim_startup_pages+0x34b/0x460 [mlx5_core]
[ 748.001679] Code: 28 00 00 00 0f 85 22 01 00 00 48 81 c4 b0 00 00 00 31 c0 5b 5d 41 5c 41 5d 41 5e 41 5f c3 48 c7 c7 40 cc 19 a1 e8 9f 71 0e e2 <0f> 0b e9 30 ff ff ff 48 c7 c7 a0 cc 19 a1 e8 8c 71 0e e2 0f 0b e9
[ 748.003781] RSP: 0018:ffff88815220faf8 EFLAGS: 00010286
[ 748.001149] RAX: 0000000000000000 RBX: ffff8881b4900280 RCX: 0000000000000000
[ 748.001445] RDX: 0000000000000027 RSI: 0000000000000004 RDI: ffffed102a441f51
[ 748.001614] RBP: 00000000000032b9 R08: 0000000000000001 R09: ffffed1054a15ee8
[ 748.001446] R10: ffff8882a50af73b R11: ffffed1054a15ee7 R12: fffffbfff07c1e30
[ 748.001447] R13: dffffc0000000000 R14: ffff8881b492cba8 R15: 0000000000000000
[ 748.001429] FS: 00007f58bd08b580(0000) GS:ffff8882a5080000(0000) knlGS:0000000000000000
[ 748.001695] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 748.001309] CR2: 000055a026351740 CR3: 00000001d3b48006 CR4: 0000000000370ea0
[ 748.001506] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 748.001483] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 748.001654] Call Trace:
[ 748.000576] ? mlx5_satisfy_startup_pages+0x290/0x290 [mlx5_core]
[ 748.001416] ? mlx5_cmd_teardown_hca+0xa2/0xd0 [mlx5_core]
[ 748.001354] ? mlx5_cmd_init_hca+0x280/0x280 [mlx5_core]
[ 748.001203] mlx5_function_teardown+0x30/0x60 [mlx5_core]
[ 748.001275] mlx5_uninit_one+0xa7/0xc0 [mlx5_core]
[ 748.001200] remove_one+0x5f/0xc0 [mlx5_core]
[ 748.001075] pci_device_remove+0x9f/0x1d0
[ 748.000833] device_release_driver_internal+0x1e0/0x490
[ 748.001207] unbind_store+0x19f/0x200
[ 748.000942] ? sysfs_file_ops+0x170/0x170
[ 748.001000] kernfs_fop_write_iter+0x2bc/0x450
[ 748.000970] new_sync_write+0x373/0x610
[ 748.001124] ? new_sync_read+0x600/0x600
[ 748.001057] ? lock_acquire+0x4d6/0x700
[ 748.000908] ? lockdep_hardirqs_on_prepare+0x400/0x400
[ 748.001126] ? fd_install+0x1c9/0x4d0
[ 748.000951] vfs_write+0x4d0/0x800
[ 748.000804] ksys_write+0xf9/0x1d0
[ 748.000868] ? __x64_sys_read+0xb0/0xb0
[ 748.000811] ? filp_open+0x50/0x50
[ 748.000919] ? syscall_enter_from_user_mode+0x1d/0x50
[ 748.001223] do_syscall_64+0x3f/0x80
[ 748.000892] entry_SYSCALL_64_after_hwframe+0x44/0xae
[ 748.001026] RIP: 0033:0x7f58bcfb22f7
[ 748.000944] Code: 0d 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b7 0f 1f 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 28 48 89 54 24 18 48 89 74 24
[ 748.003925] RSP: 002b:00007fffd7f2aaa8 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
[ 748.001732] RAX: ffffffffffffffda RBX: 000000000000000d RCX: 00007f58bcfb22f7
[ 748.001426] RDX: 000000000000000d RSI: 00007fffd7f2abc0 RDI: 0000000000000003
[ 748.001746] RBP: 00007fffd7f2abc0 R08: 0000000000000000 R09: 0000000000000001
[ 748.001631] R10: 00000000000001b6 R11: 0000000000000246 R12: 000000000000000d
[ 748.001537] R13: 00005597ac2c24a0 R14: 000000000000000d R15: 00007f58bd084700
[ 748.001564] irq event stamp: 0
[ 748.000787] hardirqs last enabled at (0): [<0000000000000000>] 0x0
[ 748.001399] hardirqs last disabled at (0): [<ffffffff813132cf>] copy_process+0x146f/0x5eb0
[ 748.001854] softirqs last enabled at (0): [<ffffffff8131330e>] copy_process+0x14ae/0x5eb0
[ 748.013431] softirqs last disabled at (0): [<0000000000000000>] 0x0
[ 748.001492] ---[ end trace a6fabd773d1c51ae ]---
Fix by destroying the send queue of a hairpin peer net device that is
being removed/unbound, which returns the allocated ring buffer pages to
the host.
Fixes: 4d8fcf216c90 ("net/mlx5e: Avoid unbounded peer devices when unpairing TC hairpin rules")
Signed-off-by: Dima Chumak <[email protected]>
Reviewed-by: Roi Dayan <[email protected]>
Signed-off-by: Saeed Mahameed <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
.../net/ethernet/mellanox/mlx5/core/en_tc.c | 2 +-
.../ethernet/mellanox/mlx5/core/transobj.c | 30 +++++++++++++++----
include/linux/mlx5/transobj.h | 1 +
3 files changed, 26 insertions(+), 7 deletions(-)
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c b/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c
index 80abdb0b47d7..59837af959d0 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c
@@ -5206,7 +5206,7 @@ static void mlx5e_tc_hairpin_update_dead_peer(struct mlx5e_priv *priv,
list_for_each_entry_safe(hpe, tmp, &init_wait_list, dead_peer_wait_list) {
wait_for_completion(&hpe->res_ready);
if (!IS_ERR_OR_NULL(hpe->hp) && hpe->peer_vhca_id == peer_vhca_id)
- hpe->hp->pair->peer_gone = true;
+ mlx5_core_hairpin_clear_dead_peer(hpe->hp->pair);
mlx5e_hairpin_put(priv, hpe);
}
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/transobj.c b/drivers/net/ethernet/mellanox/mlx5/core/transobj.c
index 01cc00ad8acf..b6931bbe52d2 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/transobj.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/transobj.c
@@ -424,6 +424,15 @@ err_modify_sq:
return err;
}
+static void mlx5_hairpin_unpair_peer_sq(struct mlx5_hairpin *hp)
+{
+ int i;
+
+ for (i = 0; i < hp->num_channels; i++)
+ mlx5_hairpin_modify_sq(hp->peer_mdev, hp->sqn[i], MLX5_SQC_STATE_RDY,
+ MLX5_SQC_STATE_RST, 0, 0);
+}
+
static void mlx5_hairpin_unpair_queues(struct mlx5_hairpin *hp)
{
int i;
@@ -432,13 +441,9 @@ static void mlx5_hairpin_unpair_queues(struct mlx5_hairpin *hp)
for (i = 0; i < hp->num_channels; i++)
mlx5_hairpin_modify_rq(hp->func_mdev, hp->rqn[i], MLX5_RQC_STATE_RDY,
MLX5_RQC_STATE_RST, 0, 0);
-
/* unset peer SQs */
- if (hp->peer_gone)
- return;
- for (i = 0; i < hp->num_channels; i++)
- mlx5_hairpin_modify_sq(hp->peer_mdev, hp->sqn[i], MLX5_SQC_STATE_RDY,
- MLX5_SQC_STATE_RST, 0, 0);
+ if (!hp->peer_gone)
+ mlx5_hairpin_unpair_peer_sq(hp);
}
struct mlx5_hairpin *
@@ -485,3 +490,16 @@ void mlx5_core_hairpin_destroy(struct mlx5_hairpin *hp)
mlx5_hairpin_destroy_queues(hp);
kfree(hp);
}
+
+void mlx5_core_hairpin_clear_dead_peer(struct mlx5_hairpin *hp)
+{
+ int i;
+
+ mlx5_hairpin_unpair_peer_sq(hp);
+
+ /* destroy peer SQ */
+ for (i = 0; i < hp->num_channels; i++)
+ mlx5_core_destroy_sq(hp->peer_mdev, hp->sqn[i]);
+
+ hp->peer_gone = true;
+}
diff --git a/include/linux/mlx5/transobj.h b/include/linux/mlx5/transobj.h
index 028f442530cf..60ffeb6b67ae 100644
--- a/include/linux/mlx5/transobj.h
+++ b/include/linux/mlx5/transobj.h
@@ -85,4 +85,5 @@ mlx5_core_hairpin_create(struct mlx5_core_dev *func_mdev,
struct mlx5_hairpin_params *params);
void mlx5_core_hairpin_destroy(struct mlx5_hairpin *pair);
+void mlx5_core_hairpin_clear_dead_peer(struct mlx5_hairpin *hp);
#endif /* __TRANSOBJ_H__ */
--
2.30.2
From: Maor Gottlieb <[email protected]>
[ Upstream commit c189716b2a7c1d2d8658e269735273caa1c38b54 ]
Check if RoCE is supported by the device before enable it in
the vport context and create all the RDMA steering objects.
Fixes: 80f09dfc237f ("net/mlx5: Eswitch, enable RoCE loopback traffic")
Signed-off-by: Maor Gottlieb <[email protected]>
Signed-off-by: Saeed Mahameed <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/mellanox/mlx5/core/rdma.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/rdma.c b/drivers/net/ethernet/mellanox/mlx5/core/rdma.c
index 8e0dddc6383f..2389239acadc 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/rdma.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/rdma.c
@@ -156,6 +156,9 @@ void mlx5_rdma_enable_roce(struct mlx5_core_dev *dev)
{
int err;
+ if (!MLX5_CAP_GEN(dev, roce))
+ return;
+
err = mlx5_nic_vport_enable_roce(dev);
if (err) {
mlx5_core_err(dev, "Failed to enable RoCE: %d\n", err);
--
2.30.2
From: Yevgeny Kliteynik <[email protected]>
[ Upstream commit 64f45c0fc4c71f577506c5a7a7956ae3bc3388ea ]
Allow sw_owner_v2 based on sw_format_version.
Signed-off-by: Alex Vesker <[email protected]>
Signed-off-by: Yevgeny Kliteynik <[email protected]>
Signed-off-by: Saeed Mahameed <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
.../mellanox/mlx5/core/steering/dr_cmd.c | 17 +++++++++++------
.../mellanox/mlx5/core/steering/dr_domain.c | 17 +++++++++--------
.../mellanox/mlx5/core/steering/dr_types.h | 6 +++++-
.../mellanox/mlx5/core/steering/mlx5dr.h | 5 ++++-
4 files changed, 29 insertions(+), 16 deletions(-)
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/steering/dr_cmd.c b/drivers/net/ethernet/mellanox/mlx5/core/steering/dr_cmd.c
index 51bbd88ff021..fd56cae0d54f 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/steering/dr_cmd.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/steering/dr_cmd.c
@@ -78,9 +78,9 @@ int mlx5dr_cmd_query_esw_caps(struct mlx5_core_dev *mdev,
caps->uplink_icm_address_tx =
MLX5_CAP64_ESW_FLOWTABLE(mdev,
sw_steering_uplink_icm_address_tx);
- caps->sw_owner =
- MLX5_CAP_ESW_FLOWTABLE_FDB(mdev,
- sw_owner);
+ caps->sw_owner_v2 = MLX5_CAP_ESW_FLOWTABLE_FDB(mdev, sw_owner_v2);
+ if (!caps->sw_owner_v2)
+ caps->sw_owner = MLX5_CAP_ESW_FLOWTABLE_FDB(mdev, sw_owner);
return 0;
}
@@ -113,10 +113,15 @@ int mlx5dr_cmd_query_device(struct mlx5_core_dev *mdev,
caps->nic_tx_allow_address =
MLX5_CAP64_FLOWTABLE(mdev, sw_steering_nic_tx_action_allow_icm_address);
- caps->rx_sw_owner = MLX5_CAP_FLOWTABLE_NIC_RX(mdev, sw_owner);
- caps->max_ft_level = MLX5_CAP_FLOWTABLE_NIC_RX(mdev, max_ft_level);
+ caps->rx_sw_owner_v2 = MLX5_CAP_FLOWTABLE_NIC_RX(mdev, sw_owner_v2);
+ caps->tx_sw_owner_v2 = MLX5_CAP_FLOWTABLE_NIC_TX(mdev, sw_owner_v2);
+
+ if (!caps->rx_sw_owner_v2)
+ caps->rx_sw_owner = MLX5_CAP_FLOWTABLE_NIC_RX(mdev, sw_owner);
+ if (!caps->tx_sw_owner_v2)
+ caps->tx_sw_owner = MLX5_CAP_FLOWTABLE_NIC_TX(mdev, sw_owner);
- caps->tx_sw_owner = MLX5_CAP_FLOWTABLE_NIC_TX(mdev, sw_owner);
+ caps->max_ft_level = MLX5_CAP_FLOWTABLE_NIC_RX(mdev, max_ft_level);
caps->log_icm_size = MLX5_CAP_DEV_MEM(mdev, log_steering_sw_icm_size);
caps->hdr_modify_icm_addr =
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/steering/dr_domain.c b/drivers/net/ethernet/mellanox/mlx5/core/steering/dr_domain.c
index aa2c2d6c44e6..00d861361428 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/steering/dr_domain.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/steering/dr_domain.c
@@ -4,6 +4,11 @@
#include <linux/mlx5/eswitch.h>
#include "dr_types.h"
+#define DR_DOMAIN_SW_STEERING_SUPPORTED(dmn, dmn_type) \
+ ((dmn)->info.caps.dmn_type##_sw_owner || \
+ ((dmn)->info.caps.dmn_type##_sw_owner_v2 && \
+ (dmn)->info.caps.sw_format_ver <= MLX5_STEERING_FORMAT_CONNECTX_6DX))
+
static int dr_domain_init_cache(struct mlx5dr_domain *dmn)
{
/* Per vport cached FW FT for checksum recalculation, this
@@ -181,6 +186,7 @@ static int dr_domain_query_fdb_caps(struct mlx5_core_dev *mdev,
return ret;
dmn->info.caps.fdb_sw_owner = dmn->info.caps.esw_caps.sw_owner;
+ dmn->info.caps.fdb_sw_owner_v2 = dmn->info.caps.esw_caps.sw_owner_v2;
dmn->info.caps.esw_rx_drop_address = dmn->info.caps.esw_caps.drop_icm_address_rx;
dmn->info.caps.esw_tx_drop_address = dmn->info.caps.esw_caps.drop_icm_address_tx;
@@ -223,18 +229,13 @@ static int dr_domain_caps_init(struct mlx5_core_dev *mdev,
if (ret)
return ret;
- if (dmn->info.caps.sw_format_ver != MLX5_STEERING_FORMAT_CONNECTX_5) {
- mlx5dr_err(dmn, "SW steering is not supported on this device\n");
- return -EOPNOTSUPP;
- }
-
ret = dr_domain_query_fdb_caps(mdev, dmn);
if (ret)
return ret;
switch (dmn->type) {
case MLX5DR_DOMAIN_TYPE_NIC_RX:
- if (!dmn->info.caps.rx_sw_owner)
+ if (!DR_DOMAIN_SW_STEERING_SUPPORTED(dmn, rx))
return -ENOTSUPP;
dmn->info.supp_sw_steering = true;
@@ -243,7 +244,7 @@ static int dr_domain_caps_init(struct mlx5_core_dev *mdev,
dmn->info.rx.drop_icm_addr = dmn->info.caps.nic_rx_drop_address;
break;
case MLX5DR_DOMAIN_TYPE_NIC_TX:
- if (!dmn->info.caps.tx_sw_owner)
+ if (!DR_DOMAIN_SW_STEERING_SUPPORTED(dmn, tx))
return -ENOTSUPP;
dmn->info.supp_sw_steering = true;
@@ -255,7 +256,7 @@ static int dr_domain_caps_init(struct mlx5_core_dev *mdev,
if (!dmn->info.caps.eswitch_manager)
return -ENOTSUPP;
- if (!dmn->info.caps.fdb_sw_owner)
+ if (!DR_DOMAIN_SW_STEERING_SUPPORTED(dmn, fdb))
return -ENOTSUPP;
dmn->info.rx.ste_type = MLX5DR_STE_TYPE_RX;
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/steering/dr_types.h b/drivers/net/ethernet/mellanox/mlx5/core/steering/dr_types.h
index cf62ea4f882e..42c49f09e9d3 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/steering/dr_types.h
+++ b/drivers/net/ethernet/mellanox/mlx5/core/steering/dr_types.h
@@ -597,7 +597,8 @@ struct mlx5dr_esw_caps {
u64 drop_icm_address_tx;
u64 uplink_icm_address_rx;
u64 uplink_icm_address_tx;
- bool sw_owner;
+ u8 sw_owner:1;
+ u8 sw_owner_v2:1;
};
struct mlx5dr_cmd_vport_cap {
@@ -630,6 +631,9 @@ struct mlx5dr_cmd_caps {
bool rx_sw_owner;
bool tx_sw_owner;
bool fdb_sw_owner;
+ u8 rx_sw_owner_v2:1;
+ u8 tx_sw_owner_v2:1;
+ u8 fdb_sw_owner_v2:1;
u32 num_vports;
struct mlx5dr_esw_caps esw_caps;
struct mlx5dr_cmd_vport_cap *vports_caps;
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/steering/mlx5dr.h b/drivers/net/ethernet/mellanox/mlx5/core/steering/mlx5dr.h
index 7914fe3fc68d..6f3db8dc896c 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/steering/mlx5dr.h
+++ b/drivers/net/ethernet/mellanox/mlx5/core/steering/mlx5dr.h
@@ -124,7 +124,10 @@ int mlx5dr_action_destroy(struct mlx5dr_action *action);
static inline bool
mlx5dr_is_supported(struct mlx5_core_dev *dev)
{
- return MLX5_CAP_ESW_FLOWTABLE_FDB(dev, sw_owner);
+ return MLX5_CAP_ESW_FLOWTABLE_FDB(dev, sw_owner) ||
+ (MLX5_CAP_ESW_FLOWTABLE_FDB(dev, sw_owner_v2) &&
+ (MLX5_CAP_GEN(dev, steering_format_version) <=
+ MLX5_STEERING_FORMAT_CONNECTX_6DX));
}
#endif /* _MLX5DR_H_ */
--
2.30.2
From: Randy Dunlap <[email protected]>
[ Upstream commit 8e2e4f3c58528c6040b5762b666734f8cceba568 ]
When CONFIG_HAS_IOMEM is not set/enabled, certain iomap() family
functions [including ioremap(), devm_ioremap(), etc.] are not
available.
Drivers that use these functions should depend on HAS_IOMEM so that
they do not cause build errors.
Mends this build error:
s390-linux-ld: drivers/dma/sf-pdma/sf-pdma.o: in function `sf_pdma_probe':
sf-pdma.c:(.text+0x1668): undefined reference to `devm_ioremap_resource'
Fixes: 6973886ad58e ("dmaengine: sf-pdma: add platform DMA support for HiFive Unleashed A00")
Signed-off-by: Randy Dunlap <[email protected]>
Reported-by: kernel test robot <[email protected]>
Cc: Green Wan <[email protected]>
Cc: Vinod Koul <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Vinod Koul <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/dma/sf-pdma/Kconfig | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/dma/sf-pdma/Kconfig b/drivers/dma/sf-pdma/Kconfig
index f8ffa02e279f..ba46a0a15a93 100644
--- a/drivers/dma/sf-pdma/Kconfig
+++ b/drivers/dma/sf-pdma/Kconfig
@@ -1,5 +1,6 @@
config SF_PDMA
tristate "Sifive PDMA controller driver"
+ depends on HAS_IOMEM
select DMA_ENGINE
select DMA_VIRTUAL_CHANNELS
help
--
2.30.2
From: Du Cheng <[email protected]>
[ Upstream commit e298aa358f0ca658406d524b6639fe389cb6e11e ]
Replace hard-coded compile-time constants for header length check
with dynamic determination based on the frame type. Otherwise, we
hit a validation WARN_ON in cfg80211 later.
Fixes: cd418ba63f0c ("mac80211: convert S1G beacon to scan results")
Reported-by: [email protected]
Signed-off-by: Du Cheng <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
[style fixes, reword commit message]
Signed-off-by: Johannes Berg <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/mac80211/scan.c | 21 ++++++++++++++++-----
1 file changed, 16 insertions(+), 5 deletions(-)
diff --git a/net/mac80211/scan.c b/net/mac80211/scan.c
index d4cc9ac2d703..6b50cb5e0e3c 100644
--- a/net/mac80211/scan.c
+++ b/net/mac80211/scan.c
@@ -251,13 +251,24 @@ void ieee80211_scan_rx(struct ieee80211_local *local, struct sk_buff *skb)
struct ieee80211_mgmt *mgmt = (void *)skb->data;
struct ieee80211_bss *bss;
struct ieee80211_channel *channel;
+ size_t min_hdr_len = offsetof(struct ieee80211_mgmt,
+ u.probe_resp.variable);
+
+ if (!ieee80211_is_probe_resp(mgmt->frame_control) &&
+ !ieee80211_is_beacon(mgmt->frame_control) &&
+ !ieee80211_is_s1g_beacon(mgmt->frame_control))
+ return;
if (ieee80211_is_s1g_beacon(mgmt->frame_control)) {
- if (skb->len < 15)
- return;
- } else if (skb->len < 24 ||
- (!ieee80211_is_probe_resp(mgmt->frame_control) &&
- !ieee80211_is_beacon(mgmt->frame_control)))
+ if (ieee80211_is_s1g_short_beacon(mgmt->frame_control))
+ min_hdr_len = offsetof(struct ieee80211_ext,
+ u.s1g_short_beacon.variable);
+ else
+ min_hdr_len = offsetof(struct ieee80211_ext,
+ u.s1g_beacon);
+ }
+
+ if (skb->len < min_hdr_len)
return;
sdata1 = rcu_dereference(local->scan_sdata);
--
2.30.2
From: Paolo Abeni <[email protected]>
[ Upstream commit 61e710227e97172355d5f150d5c78c64175d9fb2 ]
warn_bad_map() produces a kernel WARN on bad input coming
from the network. Use pr_debug() to avoid spamming the system
log.
Additionally, when the right bound check fails, warn_bad_map() reports
the wrong ssn value, let's fix it.
Fixes: 648ef4b88673 ("mptcp: Implement MPTCP receive path")
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/107
Signed-off-by: Paolo Abeni <[email protected]>
Signed-off-by: Mat Martineau <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/mptcp/subflow.c | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/net/mptcp/subflow.c b/net/mptcp/subflow.c
index 96b6aca9d0ae..851fb3d8c791 100644
--- a/net/mptcp/subflow.c
+++ b/net/mptcp/subflow.c
@@ -655,10 +655,10 @@ static u64 expand_seq(u64 old_seq, u16 old_data_len, u64 seq)
return seq | ((old_seq + old_data_len + 1) & GENMASK_ULL(63, 32));
}
-static void warn_bad_map(struct mptcp_subflow_context *subflow, u32 ssn)
+static void dbg_bad_map(struct mptcp_subflow_context *subflow, u32 ssn)
{
- WARN_ONCE(1, "Bad mapping: ssn=%d map_seq=%d map_data_len=%d",
- ssn, subflow->map_subflow_seq, subflow->map_data_len);
+ pr_debug("Bad mapping: ssn=%d map_seq=%d map_data_len=%d",
+ ssn, subflow->map_subflow_seq, subflow->map_data_len);
}
static bool skb_is_fully_mapped(struct sock *ssk, struct sk_buff *skb)
@@ -683,13 +683,13 @@ static bool validate_mapping(struct sock *ssk, struct sk_buff *skb)
/* Mapping covers data later in the subflow stream,
* currently unsupported.
*/
- warn_bad_map(subflow, ssn);
+ dbg_bad_map(subflow, ssn);
return false;
}
if (unlikely(!before(ssn, subflow->map_subflow_seq +
subflow->map_data_len))) {
/* Mapping does covers past subflow data, invalid */
- warn_bad_map(subflow, ssn + skb->len);
+ dbg_bad_map(subflow, ssn);
return false;
}
return true;
--
2.30.2
From: Vladimir Oltean <[email protected]>
[ Upstream commit 1650bdb1c516c248fb06f6d076559ff6437a5853 ]
Because flow control is set up statically in ocelot_init_port(), and not
in phylink_mac_link_up(), what happens is that after the blamed commit,
the flow control remains disabled after the port flushing procedure.
Fixes: eb4733d7cffc ("net: dsa: felix: implement port flushing on .phylink_mac_link_down")
Signed-off-by: Vladimir Oltean <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/mscc/ocelot.c | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/drivers/net/ethernet/mscc/ocelot.c b/drivers/net/ethernet/mscc/ocelot.c
index aa400b925b08..5bfc7acfd13a 100644
--- a/drivers/net/ethernet/mscc/ocelot.c
+++ b/drivers/net/ethernet/mscc/ocelot.c
@@ -355,6 +355,7 @@ static u32 ocelot_read_eq_avail(struct ocelot *ocelot, int port)
int ocelot_port_flush(struct ocelot *ocelot, int port)
{
+ unsigned int pause_ena;
int err, val;
/* Disable dequeuing from the egress queues */
@@ -363,6 +364,7 @@ int ocelot_port_flush(struct ocelot *ocelot, int port)
QSYS_PORT_MODE, port);
/* Disable flow control */
+ ocelot_fields_read(ocelot, port, SYS_PAUSE_CFG_PAUSE_ENA, &pause_ena);
ocelot_fields_write(ocelot, port, SYS_PAUSE_CFG_PAUSE_ENA, 0);
/* Disable priority flow control */
@@ -398,6 +400,9 @@ int ocelot_port_flush(struct ocelot *ocelot, int port)
/* Clear flushing again. */
ocelot_rmw_gix(ocelot, 0, REW_PORT_CFG_FLUSH_ENA, REW_PORT_CFG, port);
+ /* Re-enable flow control */
+ ocelot_fields_write(ocelot, port, SYS_PAUSE_CFG_PAUSE_ENA, pause_ena);
+
return err;
}
EXPORT_SYMBOL(ocelot_port_flush);
--
2.30.2
From: Paolo Abeni <[email protected]>
[ Upstream commit 2395da0e17935ce9158cdfae433962bdb6cbfa67 ]
Syncookie validation may fail for OoO packets, causing spurious
resets and self-tests failures, so let's force syncookie only
for tests iteration with no OoO.
Fixes: fed61c4b584c ("selftests: mptcp: make 2nd net namespace use tcp syn cookies unconditionally")
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/198
Signed-off-by: Paolo Abeni <[email protected]>
Signed-off-by: Mat Martineau <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
tools/testing/selftests/net/mptcp/mptcp_connect.sh | 11 ++++++++---
1 file changed, 8 insertions(+), 3 deletions(-)
diff --git a/tools/testing/selftests/net/mptcp/mptcp_connect.sh b/tools/testing/selftests/net/mptcp/mptcp_connect.sh
index e927df83efb9..987a914ee0df 100755
--- a/tools/testing/selftests/net/mptcp/mptcp_connect.sh
+++ b/tools/testing/selftests/net/mptcp/mptcp_connect.sh
@@ -195,9 +195,6 @@ ip -net "$ns4" link set ns4eth3 up
ip -net "$ns4" route add default via 10.0.3.2
ip -net "$ns4" route add default via dead:beef:3::2
-# use TCP syn cookies, even if no flooding was detected.
-ip netns exec "$ns2" sysctl -q net.ipv4.tcp_syncookies=2
-
set_ethtool_flags() {
local ns="$1"
local dev="$2"
@@ -666,6 +663,14 @@ for sender in $ns1 $ns2 $ns3 $ns4;do
exit $ret
fi
+ # ns1<->ns2 is not subject to reordering/tc delays. Use it to test
+ # mptcp syncookie support.
+ if [ $sender = $ns1 ]; then
+ ip netns exec "$ns2" sysctl -q net.ipv4.tcp_syncookies=2
+ else
+ ip netns exec "$ns2" sysctl -q net.ipv4.tcp_syncookies=1
+ fi
+
run_tests "$ns2" $sender 10.0.1.2
run_tests "$ns2" $sender dead:beef:1::2
run_tests "$ns2" $sender 10.0.2.1
--
2.30.2
From: Christophe JAILLET <[email protected]>
[ Upstream commit 33e381448cf7a05d76ac0b47d4a6531ecd0e5c53 ]
If an error occurs after a 'pci_enable_pcie_error_reporting()' call, it
must be undone by a corresponding 'pci_disable_pcie_error_reporting()'
call, as already done in the remove function.
Fixes: ab69bde6b2e9 ("alx: add a simple AR816x/AR817x device driver")
Signed-off-by: Christophe JAILLET <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/atheros/alx/main.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/net/ethernet/atheros/alx/main.c b/drivers/net/ethernet/atheros/alx/main.c
index 9e02f8864593..5e90df42b201 100644
--- a/drivers/net/ethernet/atheros/alx/main.c
+++ b/drivers/net/ethernet/atheros/alx/main.c
@@ -1849,6 +1849,7 @@ out_free_netdev:
free_netdev(netdev);
out_pci_release:
pci_release_mem_regions(pdev);
+ pci_disable_pcie_error_reporting(pdev);
out_pci_disable:
pci_disable_device(pdev);
return err;
--
2.30.2
From: Rahul Lakkireddy <[email protected]>
[ Upstream commit 42a2039753a7f758ba5c85cb199fcf10dc2111eb ]
Boot images are copied to memory and updated with current underlying
device ID before flashing them to adapter. Ensure the updated images
are always flashed in Big Endian to allow the firmware to read the
new images during boot properly.
Fixes: 550883558f17 ("cxgb4: add support to flash boot image")
Signed-off-by: Rahul Lakkireddy <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/chelsio/cxgb4/t4_hw.c | 44 +++++++++++++---------
1 file changed, 27 insertions(+), 17 deletions(-)
diff --git a/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c b/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c
index 581670dced6e..236f6bf2858a 100644
--- a/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c
+++ b/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c
@@ -3067,16 +3067,19 @@ int t4_read_flash(struct adapter *adapter, unsigned int addr,
* @addr: the start address to write
* @n: length of data to write in bytes
* @data: the data to write
+ * @byte_oriented: whether to store data as bytes or as words
*
* Writes up to a page of data (256 bytes) to the serial flash starting
* at the given address. All the data must be written to the same page.
+ * If @byte_oriented is set the write data is stored as byte stream
+ * (i.e. matches what on disk), otherwise in big-endian.
*/
static int t4_write_flash(struct adapter *adapter, unsigned int addr,
- unsigned int n, const u8 *data)
+ unsigned int n, const u8 *data, bool byte_oriented)
{
- int ret;
- u32 buf[64];
unsigned int i, c, left, val, offset = addr & 0xff;
+ u32 buf[64];
+ int ret;
if (addr >= adapter->params.sf_size || offset + n > SF_PAGE_SIZE)
return -EINVAL;
@@ -3087,10 +3090,14 @@ static int t4_write_flash(struct adapter *adapter, unsigned int addr,
(ret = sf1_write(adapter, 4, 1, 1, val)) != 0)
goto unlock;
- for (left = n; left; left -= c) {
+ for (left = n; left; left -= c, data += c) {
c = min(left, 4U);
- for (val = 0, i = 0; i < c; ++i)
- val = (val << 8) + *data++;
+ for (val = 0, i = 0; i < c; ++i) {
+ if (byte_oriented)
+ val = (val << 8) + data[i];
+ else
+ val = (val << 8) + data[c - i - 1];
+ }
ret = sf1_write(adapter, c, c != left, 1, val);
if (ret)
@@ -3103,7 +3110,8 @@ static int t4_write_flash(struct adapter *adapter, unsigned int addr,
t4_write_reg(adapter, SF_OP_A, 0); /* unlock SF */
/* Read the page to verify the write succeeded */
- ret = t4_read_flash(adapter, addr & ~0xff, ARRAY_SIZE(buf), buf, 1);
+ ret = t4_read_flash(adapter, addr & ~0xff, ARRAY_SIZE(buf), buf,
+ byte_oriented);
if (ret)
return ret;
@@ -3699,7 +3707,7 @@ int t4_load_fw(struct adapter *adap, const u8 *fw_data, unsigned int size)
*/
memcpy(first_page, fw_data, SF_PAGE_SIZE);
((struct fw_hdr *)first_page)->fw_ver = cpu_to_be32(0xffffffff);
- ret = t4_write_flash(adap, fw_start, SF_PAGE_SIZE, first_page);
+ ret = t4_write_flash(adap, fw_start, SF_PAGE_SIZE, first_page, true);
if (ret)
goto out;
@@ -3707,14 +3715,14 @@ int t4_load_fw(struct adapter *adap, const u8 *fw_data, unsigned int size)
for (size -= SF_PAGE_SIZE; size; size -= SF_PAGE_SIZE) {
addr += SF_PAGE_SIZE;
fw_data += SF_PAGE_SIZE;
- ret = t4_write_flash(adap, addr, SF_PAGE_SIZE, fw_data);
+ ret = t4_write_flash(adap, addr, SF_PAGE_SIZE, fw_data, true);
if (ret)
goto out;
}
- ret = t4_write_flash(adap,
- fw_start + offsetof(struct fw_hdr, fw_ver),
- sizeof(hdr->fw_ver), (const u8 *)&hdr->fw_ver);
+ ret = t4_write_flash(adap, fw_start + offsetof(struct fw_hdr, fw_ver),
+ sizeof(hdr->fw_ver), (const u8 *)&hdr->fw_ver,
+ true);
out:
if (ret)
dev_err(adap->pdev_dev, "firmware download failed, error %d\n",
@@ -10215,7 +10223,7 @@ int t4_load_cfg(struct adapter *adap, const u8 *cfg_data, unsigned int size)
n = size - i;
else
n = SF_PAGE_SIZE;
- ret = t4_write_flash(adap, addr, n, cfg_data);
+ ret = t4_write_flash(adap, addr, n, cfg_data, true);
if (ret)
goto out;
@@ -10684,13 +10692,14 @@ int t4_load_boot(struct adapter *adap, u8 *boot_data,
for (size -= SF_PAGE_SIZE; size; size -= SF_PAGE_SIZE) {
addr += SF_PAGE_SIZE;
boot_data += SF_PAGE_SIZE;
- ret = t4_write_flash(adap, addr, SF_PAGE_SIZE, boot_data);
+ ret = t4_write_flash(adap, addr, SF_PAGE_SIZE, boot_data,
+ false);
if (ret)
goto out;
}
ret = t4_write_flash(adap, boot_sector, SF_PAGE_SIZE,
- (const u8 *)header);
+ (const u8 *)header, false);
out:
if (ret)
@@ -10765,7 +10774,7 @@ int t4_load_bootcfg(struct adapter *adap, const u8 *cfg_data, unsigned int size)
for (i = 0; i < size; i += SF_PAGE_SIZE) {
n = min_t(u32, size - i, SF_PAGE_SIZE);
- ret = t4_write_flash(adap, addr, n, cfg_data);
+ ret = t4_write_flash(adap, addr, n, cfg_data, false);
if (ret)
goto out;
@@ -10777,7 +10786,8 @@ int t4_load_bootcfg(struct adapter *adap, const u8 *cfg_data, unsigned int size)
for (i = 0; i < npad; i++) {
u8 data = 0;
- ret = t4_write_flash(adap, cfg_addr + size + i, 1, &data);
+ ret = t4_write_flash(adap, cfg_addr + size + i, 1, &data,
+ false);
if (ret)
goto out;
}
--
2.30.2
From: Kev Jackson <[email protected]>
[ Upstream commit 11fc79fc9f2e395aa39fa5baccae62767c5d8280 ]
When calling xsk_socket__create_shared(), the logic at line 1097 marks a
boolean flag true within the xsk_umem structure to track setup progress
in order to support multiple calls to the function. However, instead of
marking umem->tx_ring_setup_done, the code incorrectly sets
umem->rx_ring_setup_done. This leads to improper behaviour when
creating and destroying xsk and umem structures.
Multiple calls to this function is documented as supported.
Fixes: ca7a83e2487a ("libbpf: Only create rx and tx XDP rings when necessary")
Signed-off-by: Kev Jackson <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Acked-by: Yonghong Song <[email protected]>
Link: https://lore.kernel.org/bpf/YL4aU4f3Aaik7CN0@linux-dev
Signed-off-by: Sasha Levin <[email protected]>
---
tools/lib/bpf/xsk.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/tools/lib/bpf/xsk.c b/tools/lib/bpf/xsk.c
index 7150e34cf2af..3028f932e10c 100644
--- a/tools/lib/bpf/xsk.c
+++ b/tools/lib/bpf/xsk.c
@@ -779,7 +779,7 @@ int xsk_socket__create_shared(struct xsk_socket **xsk_ptr,
goto out_put_ctx;
}
if (xsk->fd == umem->fd)
- umem->rx_ring_setup_done = true;
+ umem->tx_ring_setup_done = true;
}
err = xsk_get_mmap_offsets(xsk->fd, &off);
--
2.30.2
From: Sven Eckelmann <[email protected]>
[ Upstream commit 9f460ae31c4435fd022c443a6029352217a16ac1 ]
The soft/batadv interface for a queued OGM can be changed during the time
the OGM was queued for transmission and when the OGM is actually
transmitted by the worker.
But WARN_ON must be used to denote kernel bugs and not to print simple
warnings. A warning can simply be printed using pr_warn.
Reported-by: Tetsuo Handa <[email protected]>
Reported-by: [email protected]
Fixes: ef0a937f7a14 ("batman-adv: consider outgoing interface in OGM sending")
Signed-off-by: Sven Eckelmann <[email protected]>
Signed-off-by: Simon Wunderlich <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/batman-adv/bat_iv_ogm.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/net/batman-adv/bat_iv_ogm.c b/net/batman-adv/bat_iv_ogm.c
index 206d0b424712..c0aa54d21c64 100644
--- a/net/batman-adv/bat_iv_ogm.c
+++ b/net/batman-adv/bat_iv_ogm.c
@@ -410,8 +410,10 @@ static void batadv_iv_ogm_emit(struct batadv_forw_packet *forw_packet)
if (WARN_ON(!forw_packet->if_outgoing))
return;
- if (WARN_ON(forw_packet->if_outgoing->soft_iface != soft_iface))
+ if (forw_packet->if_outgoing->soft_iface != soft_iface) {
+ pr_warn("%s: soft interface switch for queued OGM\n", __func__);
return;
+ }
if (forw_packet->if_incoming->if_status != BATADV_IF_ACTIVE)
return;
--
2.30.2
From: Mykola Kostenok <[email protected]>
[ Upstream commit 2fd8d84ce3095e8a7b5fe96532c91b1b9e07339c ]
Thermal polling delay argument for modules and gearboxes thermal zones
used to be initialized with zero value, while actual delay was used to
be set by mlxsw_thermal_set_mode() by thermal operation callback
set_mode(). After operations set_mode()/get_mode() have been removed by
cited commits, modules and gearboxes thermal zones always have polling
time set to zero and do not perform temperature monitoring.
Set non-zero "polling_delay" in thermal_zone_device_register() routine,
thus, the relevant thermal zones will perform thermal monitoring.
Cc: Andrzej Pietrasiewicz <[email protected]>
Fixes: 5d7bd8aa7c35 ("thermal: Simplify or eliminate unnecessary set_mode() methods")
Fixes: 1ee14820fd8e ("thermal: remove get_mode() operation of drivers")
Signed-off-by: Mykola Kostenok <[email protected]>
Acked-by: Vadim Pasternak <[email protected]>
Reviewed-by: Jiri Pirko <[email protected]>
Signed-off-by: Ido Schimmel <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/mellanox/mlxsw/core_thermal.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/drivers/net/ethernet/mellanox/mlxsw/core_thermal.c b/drivers/net/ethernet/mellanox/mlxsw/core_thermal.c
index bf85ce9835d7..42e4437ac3c1 100644
--- a/drivers/net/ethernet/mellanox/mlxsw/core_thermal.c
+++ b/drivers/net/ethernet/mellanox/mlxsw/core_thermal.c
@@ -708,7 +708,8 @@ mlxsw_thermal_module_tz_init(struct mlxsw_thermal_module *module_tz)
MLXSW_THERMAL_TRIP_MASK,
module_tz,
&mlxsw_thermal_module_ops,
- NULL, 0, 0);
+ NULL, 0,
+ module_tz->parent->polling_delay);
if (IS_ERR(module_tz->tzdev)) {
err = PTR_ERR(module_tz->tzdev);
return err;
@@ -830,7 +831,8 @@ mlxsw_thermal_gearbox_tz_init(struct mlxsw_thermal_module *gearbox_tz)
MLXSW_THERMAL_TRIP_MASK,
gearbox_tz,
&mlxsw_thermal_gearbox_ops,
- NULL, 0, 0);
+ NULL, 0,
+ gearbox_tz->parent->polling_delay);
if (IS_ERR(gearbox_tz->tzdev))
return PTR_ERR(gearbox_tz->tzdev);
--
2.30.2
From: Yang Yingliang <[email protected]>
[ Upstream commit fffdaba402cea79b8d219355487d342ec23f91c6 ]
Add the missing iounmap() before return from d40_probe()
in the error handling case.
Fixes: 8d318a50b3d7 ("DMAENGINE: Support for ST-Ericssons DMA40 block v3")
Reported-by: Hulk Robot <[email protected]>
Signed-off-by: Yang Yingliang <[email protected]>
Reviewed-by: Linus Walleij <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Vinod Koul <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/dma/ste_dma40.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/dma/ste_dma40.c b/drivers/dma/ste_dma40.c
index 77ab1f4730be..b35b97cb8fd2 100644
--- a/drivers/dma/ste_dma40.c
+++ b/drivers/dma/ste_dma40.c
@@ -3676,6 +3676,9 @@ static int __init d40_probe(struct platform_device *pdev)
kfree(base->lcla_pool.base_unaligned);
+ if (base->lcpa_base)
+ iounmap(base->lcpa_base);
+
if (base->phy_lcpa)
release_mem_region(base->phy_lcpa,
base->lcpa_size);
--
2.30.2
From: Rahul Lakkireddy <[email protected]>
[ Upstream commit f046bd0ae15d8a0bbe57d4647da182420f720c3d ]
Before writing new PHY firmware to on-chip memory, driver queries
firmware for current running PHY firmware version, which can result
in sleep waiting for reply. So, move spinlock closer to the actual
on-chip memory write operation, instead of taking it at the callers.
Fixes: 5fff701c838e ("cxgb4: always sync access when flashing PHY firmware")
Signed-off-by: Rahul Lakkireddy <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/chelsio/cxgb4/cxgb4_ethtool.c | 2 --
drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c | 2 --
drivers/net/ethernet/chelsio/cxgb4/t4_hw.c | 2 ++
3 files changed, 2 insertions(+), 4 deletions(-)
diff --git a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_ethtool.c b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_ethtool.c
index 61ea3ec5c3fc..bc2de01d0539 100644
--- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_ethtool.c
+++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_ethtool.c
@@ -1337,9 +1337,7 @@ static int cxgb4_ethtool_flash_phy(struct net_device *netdev,
return ret;
}
- spin_lock_bh(&adap->win0_lock);
ret = t4_load_phy_fw(adap, MEMWIN_NIC, NULL, data, size);
- spin_unlock_bh(&adap->win0_lock);
if (ret)
dev_err(adap->pdev_dev, "Failed to load PHY FW\n");
diff --git a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c
index 04dcb5e4b316..8be525c5e2e4 100644
--- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c
+++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c
@@ -4428,10 +4428,8 @@ static int adap_init0_phy(struct adapter *adap)
/* Load PHY Firmware onto adapter.
*/
- spin_lock_bh(&adap->win0_lock);
ret = t4_load_phy_fw(adap, MEMWIN_NIC, phy_info->phy_fw_version,
(u8 *)phyf->data, phyf->size);
- spin_unlock_bh(&adap->win0_lock);
if (ret < 0)
dev_err(adap->pdev_dev, "PHY Firmware transfer error %d\n",
-ret);
diff --git a/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c b/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c
index 236f6bf2858a..964ea3491b80 100644
--- a/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c
+++ b/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c
@@ -3827,9 +3827,11 @@ int t4_load_phy_fw(struct adapter *adap, int win,
/* Copy the supplied PHY Firmware image to the adapter memory location
* allocated by the adapter firmware.
*/
+ spin_lock_bh(&adap->win0_lock);
ret = t4_memory_rw(adap, win, mtype, maddr,
phy_fw_size, (__be32 *)phy_fw_data,
T4_MEMORY_WRITE);
+ spin_unlock_bh(&adap->win0_lock);
if (ret)
return ret;
--
2.30.2
From: Aleksander Jan Bajkowski <[email protected]>
[ Upstream commit 7ea6cd16f1599c1eac6018751eadbc5fc736b99a ]
The previous commit didn't fix the bug properly. By mistake, it replaces
the pointer of the next skb in the descriptor ring instead of the current
one. As a result, the two descriptors are assigned the same SKB. The error
is seen during the iperf test when skb_put tries to insert a second packet
and exceeds the available buffer.
Fixes: c7718ee96dbc ("net: lantiq: fix memory corruption in RX ring ")
Signed-off-by: Aleksander Jan Bajkowski <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/lantiq_xrx200.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/lantiq_xrx200.c b/drivers/net/ethernet/lantiq_xrx200.c
index 3da494df72f3..072075bc60ee 100644
--- a/drivers/net/ethernet/lantiq_xrx200.c
+++ b/drivers/net/ethernet/lantiq_xrx200.c
@@ -154,6 +154,7 @@ static int xrx200_close(struct net_device *net_dev)
static int xrx200_alloc_skb(struct xrx200_chan *ch)
{
+ struct sk_buff *skb = ch->skb[ch->dma.desc];
dma_addr_t mapping;
int ret = 0;
@@ -168,6 +169,7 @@ static int xrx200_alloc_skb(struct xrx200_chan *ch)
XRX200_DMA_DATA_LEN, DMA_FROM_DEVICE);
if (unlikely(dma_mapping_error(ch->priv->dev, mapping))) {
dev_kfree_skb_any(ch->skb[ch->dma.desc]);
+ ch->skb[ch->dma.desc] = skb;
ret = -ENOMEM;
goto skip;
}
@@ -198,7 +200,6 @@ static int xrx200_hw_receive(struct xrx200_chan *ch)
ch->dma.desc %= LTQ_DESC_NUM;
if (ret) {
- ch->skb[ch->dma.desc] = skb;
net_dev->stats.rx_dropped++;
netdev_err(net_dev, "failed to allocate new rx buffer\n");
return ret;
--
2.30.2
From: Paolo Abeni <[email protected]>
[ Upstream commit a8b897c7bcd47f4147d066e22cc01d1026d7640e ]
Kaustubh reported and diagnosed a panic in udp_lib_lookup().
The root cause is udp_abort() racing with close(). Both
racing functions acquire the socket lock, but udp{v6}_destroy_sock()
release it before performing destructive actions.
We can't easily extend the socket lock scope to avoid the race,
instead use the SOCK_DEAD flag to prevent udp_abort from doing
any action when the critical race happens.
Diagnosed-and-tested-by: Kaustubh Pandey <[email protected]>
Fixes: 5d77dca82839 ("net: diag: support SOCK_DESTROY for UDP sockets")
Signed-off-by: Paolo Abeni <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/ipv4/udp.c | 10 ++++++++++
net/ipv6/udp.c | 3 +++
2 files changed, 13 insertions(+)
diff --git a/net/ipv4/udp.c b/net/ipv4/udp.c
index 9d28b2778e8f..fbb9a11fe4a3 100644
--- a/net/ipv4/udp.c
+++ b/net/ipv4/udp.c
@@ -2569,6 +2569,9 @@ void udp_destroy_sock(struct sock *sk)
{
struct udp_sock *up = udp_sk(sk);
bool slow = lock_sock_fast(sk);
+
+ /* protects from races with udp_abort() */
+ sock_set_flag(sk, SOCK_DEAD);
udp_flush_pending_frames(sk);
unlock_sock_fast(sk, slow);
if (static_branch_unlikely(&udp_encap_needed_key)) {
@@ -2819,10 +2822,17 @@ int udp_abort(struct sock *sk, int err)
{
lock_sock(sk);
+ /* udp{v6}_destroy_sock() sets it under the sk lock, avoid racing
+ * with close()
+ */
+ if (sock_flag(sk, SOCK_DEAD))
+ goto out;
+
sk->sk_err = err;
sk->sk_error_report(sk);
__udp_disconnect(sk, 0);
+out:
release_sock(sk);
return 0;
diff --git a/net/ipv6/udp.c b/net/ipv6/udp.c
index 29d9691359b9..e2de58d6cdce 100644
--- a/net/ipv6/udp.c
+++ b/net/ipv6/udp.c
@@ -1596,6 +1596,9 @@ void udpv6_destroy_sock(struct sock *sk)
{
struct udp_sock *up = udp_sk(sk);
lock_sock(sk);
+
+ /* protects from races with udp_abort() */
+ sock_set_flag(sk, SOCK_DEAD);
udp_v6_flush_pending_frames(sk);
release_sock(sk);
--
2.30.2
From: Eric Dumazet <[email protected]>
[ Upstream commit a494bd642d9120648b06bb7d28ce6d05f55a7819 ]
While unix_may_send(sk, osk) is called while osk is locked, it appears
unix_release_sock() can overwrite unix_peer() after this lock has been
released, making KCSAN unhappy.
Changing unix_release_sock() to access/change unix_peer()
before lock is released should fix this issue.
BUG: KCSAN: data-race in unix_dgram_sendmsg / unix_release_sock
write to 0xffff88810465a338 of 8 bytes by task 20852 on cpu 1:
unix_release_sock+0x4ed/0x6e0 net/unix/af_unix.c:558
unix_release+0x2f/0x50 net/unix/af_unix.c:859
__sock_release net/socket.c:599 [inline]
sock_close+0x6c/0x150 net/socket.c:1258
__fput+0x25b/0x4e0 fs/file_table.c:280
____fput+0x11/0x20 fs/file_table.c:313
task_work_run+0xae/0x130 kernel/task_work.c:164
tracehook_notify_resume include/linux/tracehook.h:189 [inline]
exit_to_user_mode_loop kernel/entry/common.c:175 [inline]
exit_to_user_mode_prepare+0x156/0x190 kernel/entry/common.c:209
__syscall_exit_to_user_mode_work kernel/entry/common.c:291 [inline]
syscall_exit_to_user_mode+0x20/0x40 kernel/entry/common.c:302
do_syscall_64+0x56/0x90 arch/x86/entry/common.c:57
entry_SYSCALL_64_after_hwframe+0x44/0xae
read to 0xffff88810465a338 of 8 bytes by task 20888 on cpu 0:
unix_may_send net/unix/af_unix.c:189 [inline]
unix_dgram_sendmsg+0x923/0x1610 net/unix/af_unix.c:1712
sock_sendmsg_nosec net/socket.c:654 [inline]
sock_sendmsg net/socket.c:674 [inline]
____sys_sendmsg+0x360/0x4d0 net/socket.c:2350
___sys_sendmsg net/socket.c:2404 [inline]
__sys_sendmmsg+0x315/0x4b0 net/socket.c:2490
__do_sys_sendmmsg net/socket.c:2519 [inline]
__se_sys_sendmmsg net/socket.c:2516 [inline]
__x64_sys_sendmmsg+0x53/0x60 net/socket.c:2516
do_syscall_64+0x4a/0x90 arch/x86/entry/common.c:47
entry_SYSCALL_64_after_hwframe+0x44/0xae
value changed: 0xffff888167905400 -> 0x0000000000000000
Reported by Kernel Concurrency Sanitizer on:
CPU: 0 PID: 20888 Comm: syz-executor.0 Not tainted 5.13.0-rc5-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <[email protected]>
Reported-by: syzbot <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/unix/af_unix.c | 7 ++++---
1 file changed, 4 insertions(+), 3 deletions(-)
diff --git a/net/unix/af_unix.c b/net/unix/af_unix.c
index 41c3303c3357..39be4b52329b 100644
--- a/net/unix/af_unix.c
+++ b/net/unix/af_unix.c
@@ -535,12 +535,14 @@ static void unix_release_sock(struct sock *sk, int embrion)
u->path.mnt = NULL;
state = sk->sk_state;
sk->sk_state = TCP_CLOSE;
+
+ skpair = unix_peer(sk);
+ unix_peer(sk) = NULL;
+
unix_state_unlock(sk);
wake_up_interruptible_all(&u->peer_wait);
- skpair = unix_peer(sk);
-
if (skpair != NULL) {
if (sk->sk_type == SOCK_STREAM || sk->sk_type == SOCK_SEQPACKET) {
unix_state_lock(skpair);
@@ -555,7 +557,6 @@ static void unix_release_sock(struct sock *sk, int embrion)
unix_dgram_peer_wake_disconnect(sk, skpair);
sock_put(skpair); /* It may now die */
- unix_peer(sk) = NULL;
}
/* Try to flush out this socket. Throw out buffers at least */
--
2.30.2
From: Matthew Bobrowski <[email protected]>
[ Upstream commit f644bc449b37cc32d3ce7b36a88073873aa21bd5 ]
Ensure that clean up is performed on the allocated file descriptor and
struct file object in the event that an error is encountered while copying
fid info objects. Currently, we return directly to the caller when an error
is experienced in the fid info copying helper, which isn't ideal given that
the listener process could be left with a dangling file descriptor in their
fdtable.
Fixes: 5e469c830fdb ("fanotify: copy event fid info to user")
Fixes: 44d705b0370b ("fanotify: report name info for FAN_DIR_MODIFY event")
Link: https://lore.kernel.org/linux-fsdevel/[email protected]/T/#m15361cd6399dad4396aad650de25dbf6b312288e
Link: https://lore.kernel.org/r/1ef8ae9100101eb1a91763c516c2e9a3a3b112bd.1623376346.git.repnop@google.com
Signed-off-by: Matthew Bobrowski <[email protected]>
Signed-off-by: Jan Kara <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/notify/fanotify/fanotify_user.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/fs/notify/fanotify/fanotify_user.c b/fs/notify/fanotify/fanotify_user.c
index dcab112e1f00..086b6bacbad1 100644
--- a/fs/notify/fanotify/fanotify_user.c
+++ b/fs/notify/fanotify/fanotify_user.c
@@ -378,7 +378,7 @@ static ssize_t copy_event_to_user(struct fsnotify_group *group,
info_type, fanotify_info_name(info),
info->name_len, buf, count);
if (ret < 0)
- return ret;
+ goto out_close_fd;
buf += ret;
count -= ret;
@@ -426,7 +426,7 @@ static ssize_t copy_event_to_user(struct fsnotify_group *group,
fanotify_event_object_fh(event),
info_type, dot, dot_len, buf, count);
if (ret < 0)
- return ret;
+ goto out_close_fd;
buf += ret;
count -= ret;
--
2.30.2
From: Parav Pandit <[email protected]>
[ Upstream commit bbc8222dc49db8d49add0f27bcac33f4b92193dc ]
External controller PF's MAC address is not read from the device during
vport setup. Fail to read this results in showing all zeros to user
while the factory programmed MAC is a valid value.
$ devlink port show eth1 -jp
{
"port": {
"pci/0000:03:00.0/196608": {
"type": "eth",
"netdev": "eth1",
"flavour": "pcipf",
"controller": 1,
"pfnum": 0,
"splittable": false,
"function": {
"hw_addr": "00:00:00:00:00:00"
}
}
}
}
Hence, read it when enabling a vport.
After the fix,
$ devlink port show eth1 -jp
{
"port": {
"pci/0000:03:00.0/196608": {
"type": "eth",
"netdev": "eth1",
"flavour": "pcipf",
"controller": 1,
"pfnum": 0,
"splittable": false,
"function": {
"hw_addr": "98:03:9b:a0:60:11"
}
}
}
}
Fixes: f099fde16db3 ("net/mlx5: E-switch, Support querying port function mac address")
Signed-off-by: Bodong Wang <[email protected]>
Signed-off-by: Parav Pandit <[email protected]>
Reviewed-by: Alaa Hleihel <[email protected]>
Signed-off-by: Saeed Mahameed <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/mellanox/mlx5/core/eswitch.c | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/eswitch.c b/drivers/net/ethernet/mellanox/mlx5/core/eswitch.c
index d61539b5567c..401b2f5128dd 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/eswitch.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/eswitch.c
@@ -1302,6 +1302,12 @@ static int esw_enable_vport(struct mlx5_eswitch *esw, u16 vport_num,
(!vport_num && mlx5_core_is_ecpf(esw->dev)))
vport->info.trusted = true;
+ /* External controller host PF has factory programmed MAC.
+ * Read it from the device.
+ */
+ if (mlx5_core_is_ecpf(esw->dev) && vport_num == MLX5_VPORT_PF)
+ mlx5_query_nic_vport_mac_address(esw->dev, vport_num, true, vport->info.mac);
+
esw_vport_change_handle_locked(vport);
esw->enabled_vports++;
--
2.30.2
From: Jisheng Zhang <[email protected]>
[ Upstream commit 1adb20f0d496b2c61e9aa1f4761b8d71f93d258e ]
The register starts from 0x800 is the 16th MAC address register rather
than the first one.
Fixes: cffb13f4d6fb ("stmmac: extend mac addr reg and fix perfect filering")
Signed-off-by: Jisheng Zhang <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/stmicro/stmmac/dwmac1000.h | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac1000.h b/drivers/net/ethernet/stmicro/stmmac/dwmac1000.h
index b70d44ac0990..3c73453725f9 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac1000.h
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac1000.h
@@ -76,10 +76,10 @@ enum power_event {
#define LPI_CTRL_STATUS_TLPIEN 0x00000001 /* Transmit LPI Entry */
/* GMAC HW ADDR regs */
-#define GMAC_ADDR_HIGH(reg) (((reg > 15) ? 0x00000800 : 0x00000040) + \
- (reg * 8))
-#define GMAC_ADDR_LOW(reg) (((reg > 15) ? 0x00000804 : 0x00000044) + \
- (reg * 8))
+#define GMAC_ADDR_HIGH(reg) ((reg > 15) ? 0x00000800 + (reg - 16) * 8 : \
+ 0x00000040 + (reg * 8))
+#define GMAC_ADDR_LOW(reg) ((reg > 15) ? 0x00000804 + (reg - 16) * 8 : \
+ 0x00000044 + (reg * 8))
#define GMAC_MAX_PERFECT_ADDRESSES 1
#define GMAC_PCS_BASE 0x000000c0 /* PCS register base */
--
2.30.2
From: Changbin Du <[email protected]>
[ Upstream commit ea6932d70e223e02fea3ae20a4feff05d7c1ea9a ]
There is a panic in socket ioctl cmd SIOCGSKNS when NET_NS is not enabled.
The reason is that nsfs tries to access ns->ops but the proc_ns_operations
is not implemented in this case.
[7.670023] Unable to handle kernel NULL pointer dereference at virtual address 00000010
[7.670268] pgd = 32b54000
[7.670544] [00000010] *pgd=00000000
[7.671861] Internal error: Oops: 5 [#1] SMP ARM
[7.672315] Modules linked in:
[7.672918] CPU: 0 PID: 1 Comm: systemd Not tainted 5.13.0-rc3-00375-g6799d4f2da49 #16
[7.673309] Hardware name: Generic DT based system
[7.673642] PC is at nsfs_evict+0x24/0x30
[7.674486] LR is at clear_inode+0x20/0x9c
The same to tun SIOCGSKNS command.
To fix this problem, we make get_net_ns() return -EINVAL when NET_NS is
disabled. Meanwhile move it to right place net/core/net_namespace.c.
Signed-off-by: Changbin Du <[email protected]>
Fixes: c62cce2caee5 ("net: add an ioctl to get a socket network namespace")
Cc: Cong Wang <[email protected]>
Cc: Jakub Kicinski <[email protected]>
Cc: David Laight <[email protected]>
Cc: Christian Brauner <[email protected]>
Suggested-by: Jakub Kicinski <[email protected]>
Acked-by: Christian Brauner <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
include/linux/socket.h | 2 --
include/net/net_namespace.h | 7 +++++++
net/core/net_namespace.c | 12 ++++++++++++
net/socket.c | 13 -------------
4 files changed, 19 insertions(+), 15 deletions(-)
diff --git a/include/linux/socket.h b/include/linux/socket.h
index e9cb30d8cbfb..9aa530d497da 100644
--- a/include/linux/socket.h
+++ b/include/linux/socket.h
@@ -437,6 +437,4 @@ extern int __sys_getpeername(int fd, struct sockaddr __user *usockaddr,
extern int __sys_socketpair(int family, int type, int protocol,
int __user *usockvec);
extern int __sys_shutdown(int fd, int how);
-
-extern struct ns_common *get_net_ns(struct ns_common *ns);
#endif /* _LINUX_SOCKET_H */
diff --git a/include/net/net_namespace.h b/include/net/net_namespace.h
index 22bc07f4b043..eb0e7731f3b1 100644
--- a/include/net/net_namespace.h
+++ b/include/net/net_namespace.h
@@ -203,6 +203,8 @@ struct net *copy_net_ns(unsigned long flags, struct user_namespace *user_ns,
void net_ns_get_ownership(const struct net *net, kuid_t *uid, kgid_t *gid);
void net_ns_barrier(void);
+
+struct ns_common *get_net_ns(struct ns_common *ns);
#else /* CONFIG_NET_NS */
#include <linux/sched.h>
#include <linux/nsproxy.h>
@@ -222,6 +224,11 @@ static inline void net_ns_get_ownership(const struct net *net,
}
static inline void net_ns_barrier(void) {}
+
+static inline struct ns_common *get_net_ns(struct ns_common *ns)
+{
+ return ERR_PTR(-EINVAL);
+}
#endif /* CONFIG_NET_NS */
diff --git a/net/core/net_namespace.c b/net/core/net_namespace.c
index dbc66b896287..5c9d95f30be6 100644
--- a/net/core/net_namespace.c
+++ b/net/core/net_namespace.c
@@ -650,6 +650,18 @@ void __put_net(struct net *net)
}
EXPORT_SYMBOL_GPL(__put_net);
+/**
+ * get_net_ns - increment the refcount of the network namespace
+ * @ns: common namespace (net)
+ *
+ * Returns the net's common namespace.
+ */
+struct ns_common *get_net_ns(struct ns_common *ns)
+{
+ return &get_net(container_of(ns, struct net, ns))->ns;
+}
+EXPORT_SYMBOL_GPL(get_net_ns);
+
struct net *get_net_ns_by_fd(int fd)
{
struct file *file;
diff --git a/net/socket.c b/net/socket.c
index 6e6cccc2104f..002d5952ae5d 100644
--- a/net/socket.c
+++ b/net/socket.c
@@ -1080,19 +1080,6 @@ static long sock_do_ioctl(struct net *net, struct socket *sock,
* what to do with it - that's up to the protocol still.
*/
-/**
- * get_net_ns - increment the refcount of the network namespace
- * @ns: common namespace (net)
- *
- * Returns the net's common namespace.
- */
-
-struct ns_common *get_net_ns(struct ns_common *ns)
-{
- return &get_net(container_of(ns, struct net, ns))->ns;
-}
-EXPORT_SYMBOL_GPL(get_net_ns);
-
static long sock_ioctl(struct file *file, unsigned cmd, unsigned long arg)
{
struct socket *sock;
--
2.30.2
From: Maciej Żenczykowski <[email protected]>
[ Upstream commit c1a3d4067309451e68c33dbd356032549cc0bd8e ]
This is meant to make the host side cdc_ncm interface consistently
named just like the older CDC protocols: cdc_ether & cdc_ecm
(and even rndis_host), which all use 'FLAG_ETHER | FLAG_POINTTOPOINT'.
include/linux/usb/usbnet.h:
#define FLAG_ETHER 0x0020 /* maybe use "eth%d" names */
#define FLAG_WLAN 0x0080 /* use "wlan%d" names */
#define FLAG_WWAN 0x0400 /* use "wwan%d" names */
#define FLAG_POINTTOPOINT 0x1000 /* possibly use "usb%d" names */
drivers/net/usb/usbnet.c @ line 1711:
strcpy (net->name, "usb%d");
...
// heuristic: "usb%d" for links we know are two-host,
// else "eth%d" when there's reasonable doubt. userspace
// can rename the link if it knows better.
if ((dev->driver_info->flags & FLAG_ETHER) != 0 &&
((dev->driver_info->flags & FLAG_POINTTOPOINT) == 0 ||
(net->dev_addr [0] & 0x02) == 0))
strcpy (net->name, "eth%d");
/* WLAN devices should always be named "wlan%d" */
if ((dev->driver_info->flags & FLAG_WLAN) != 0)
strcpy(net->name, "wlan%d");
/* WWAN devices should always be named "wwan%d" */
if ((dev->driver_info->flags & FLAG_WWAN) != 0)
strcpy(net->name, "wwan%d");
So by using ETHER | POINTTOPOINT the interface naming is
either usb%d or eth%d based on the global uniqueness of the
mac address of the device.
Without this 2.5gbps ethernet dongles which all seem to use the cdc_ncm
driver end up being called usb%d instead of eth%d even though they're
definitely not two-host. (All 1gbps & 5gbps ethernet usb dongles I've
tested don't hit this problem due to use of different drivers, primarily
r8152 and aqc111)
Fixes tag is based purely on git blame, and is really just here to make
sure this hits LTS branches newer than v4.5.
Cc: Lorenzo Colitti <[email protected]>
Fixes: 4d06dd537f95 ("cdc_ncm: do not call usbnet_link_change from cdc_ncm_bind")
Signed-off-by: Maciej Żenczykowski <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/usb/cdc_ncm.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/usb/cdc_ncm.c b/drivers/net/usb/cdc_ncm.c
index 1d3bf810f2ca..04c4f1570bc8 100644
--- a/drivers/net/usb/cdc_ncm.c
+++ b/drivers/net/usb/cdc_ncm.c
@@ -1900,7 +1900,7 @@ static void cdc_ncm_status(struct usbnet *dev, struct urb *urb)
static const struct driver_info cdc_ncm_info = {
.description = "CDC NCM",
.flags = FLAG_POINTTOPOINT | FLAG_NO_SETINT | FLAG_MULTI_PACKET
- | FLAG_LINK_INTR,
+ | FLAG_LINK_INTR | FLAG_ETHER,
.bind = cdc_ncm_bind,
.unbind = cdc_ncm_unbind,
.manage_power = usbnet_manage_power,
--
2.30.2
From: Christophe JAILLET <[email protected]>
[ Upstream commit c19c8c0e666f9259e2fc4d2fa4b9ff8e3b40ee5d ]
If an error occurs after a 'pci_enable_pcie_error_reporting()' call, it
must be undone by a corresponding 'pci_disable_pcie_error_reporting()'
call, as already done in the remove function.
Fixes: d6b6d9877878 ("be2net: use PCIe AER capability")
Signed-off-by: Christophe JAILLET <[email protected]>
Acked-by: Somnath Kotur <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/emulex/benet/be_main.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/net/ethernet/emulex/benet/be_main.c b/drivers/net/ethernet/emulex/benet/be_main.c
index 676e437d78f6..cb1e1ad652d0 100644
--- a/drivers/net/ethernet/emulex/benet/be_main.c
+++ b/drivers/net/ethernet/emulex/benet/be_main.c
@@ -5905,6 +5905,7 @@ drv_cleanup:
unmap_bars:
be_unmap_pci_bars(adapter);
free_netdev:
+ pci_disable_pcie_error_reporting(pdev);
free_netdev(netdev);
rel_reg:
pci_release_regions(pdev);
--
2.30.2
From: Pavel Skripkin <[email protected]>
[ Upstream commit 7edcc682301492380fbdd604b4516af5ae667a13 ]
My local syzbot instance hit memory leak in
mkiss_open()[1]. The problem was in missing
free_netdev() in mkiss_close().
In mkiss_open() netdevice is allocated and then
registered, but in mkiss_close() netdevice was
only unregistered, but not freed.
Fail log:
BUG: memory leak
unreferenced object 0xffff8880281ba000 (size 4096):
comm "syz-executor.1", pid 11443, jiffies 4295046091 (age 17.660s)
hex dump (first 32 bytes):
61 78 30 00 00 00 00 00 00 00 00 00 00 00 00 00 ax0.............
00 27 fa 2a 80 88 ff ff 00 00 00 00 00 00 00 00 .'.*............
backtrace:
[<ffffffff81a27201>] kvmalloc_node+0x61/0xf0
[<ffffffff8706e7e8>] alloc_netdev_mqs+0x98/0xe80
[<ffffffff84e64192>] mkiss_open+0xb2/0x6f0 [1]
[<ffffffff842355db>] tty_ldisc_open+0x9b/0x110
[<ffffffff84236488>] tty_set_ldisc+0x2e8/0x670
[<ffffffff8421f7f3>] tty_ioctl+0xda3/0x1440
[<ffffffff81c9f273>] __x64_sys_ioctl+0x193/0x200
[<ffffffff8911263a>] do_syscall_64+0x3a/0xb0
[<ffffffff89200068>] entry_SYSCALL_64_after_hwframe+0x44/0xae
BUG: memory leak
unreferenced object 0xffff8880141a9a00 (size 96):
comm "syz-executor.1", pid 11443, jiffies 4295046091 (age 17.660s)
hex dump (first 32 bytes):
e8 a2 1b 28 80 88 ff ff e8 a2 1b 28 80 88 ff ff ...(.......(....
98 92 9c aa b0 40 02 00 00 00 00 00 00 00 00 00 .....@..........
backtrace:
[<ffffffff8709f68b>] __hw_addr_create_ex+0x5b/0x310
[<ffffffff8709fb38>] __hw_addr_add_ex+0x1f8/0x2b0
[<ffffffff870a0c7b>] dev_addr_init+0x10b/0x1f0
[<ffffffff8706e88b>] alloc_netdev_mqs+0x13b/0xe80
[<ffffffff84e64192>] mkiss_open+0xb2/0x6f0 [1]
[<ffffffff842355db>] tty_ldisc_open+0x9b/0x110
[<ffffffff84236488>] tty_set_ldisc+0x2e8/0x670
[<ffffffff8421f7f3>] tty_ioctl+0xda3/0x1440
[<ffffffff81c9f273>] __x64_sys_ioctl+0x193/0x200
[<ffffffff8911263a>] do_syscall_64+0x3a/0xb0
[<ffffffff89200068>] entry_SYSCALL_64_after_hwframe+0x44/0xae
BUG: memory leak
unreferenced object 0xffff8880219bfc00 (size 512):
comm "syz-executor.1", pid 11443, jiffies 4295046091 (age 17.660s)
hex dump (first 32 bytes):
00 a0 1b 28 80 88 ff ff 80 8f b1 8d ff ff ff ff ...(............
80 8f b1 8d ff ff ff ff 00 00 00 00 00 00 00 00 ................
backtrace:
[<ffffffff81a27201>] kvmalloc_node+0x61/0xf0
[<ffffffff8706eec7>] alloc_netdev_mqs+0x777/0xe80
[<ffffffff84e64192>] mkiss_open+0xb2/0x6f0 [1]
[<ffffffff842355db>] tty_ldisc_open+0x9b/0x110
[<ffffffff84236488>] tty_set_ldisc+0x2e8/0x670
[<ffffffff8421f7f3>] tty_ioctl+0xda3/0x1440
[<ffffffff81c9f273>] __x64_sys_ioctl+0x193/0x200
[<ffffffff8911263a>] do_syscall_64+0x3a/0xb0
[<ffffffff89200068>] entry_SYSCALL_64_after_hwframe+0x44/0xae
BUG: memory leak
unreferenced object 0xffff888029b2b200 (size 256):
comm "syz-executor.1", pid 11443, jiffies 4295046091 (age 17.660s)
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<ffffffff81a27201>] kvmalloc_node+0x61/0xf0
[<ffffffff8706f062>] alloc_netdev_mqs+0x912/0xe80
[<ffffffff84e64192>] mkiss_open+0xb2/0x6f0 [1]
[<ffffffff842355db>] tty_ldisc_open+0x9b/0x110
[<ffffffff84236488>] tty_set_ldisc+0x2e8/0x670
[<ffffffff8421f7f3>] tty_ioctl+0xda3/0x1440
[<ffffffff81c9f273>] __x64_sys_ioctl+0x193/0x200
[<ffffffff8911263a>] do_syscall_64+0x3a/0xb0
[<ffffffff89200068>] entry_SYSCALL_64_after_hwframe+0x44/0xae
Fixes: 815f62bf7427 ("[PATCH] SMP rewrite of mkiss")
Signed-off-by: Pavel Skripkin <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/hamradio/mkiss.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/net/hamradio/mkiss.c b/drivers/net/hamradio/mkiss.c
index 17be2bb2985c..920e9f888cc3 100644
--- a/drivers/net/hamradio/mkiss.c
+++ b/drivers/net/hamradio/mkiss.c
@@ -799,6 +799,7 @@ static void mkiss_close(struct tty_struct *tty)
ax->tty = NULL;
unregister_netdev(ax->dev);
+ free_netdev(ax->dev);
}
/* Perform I/O control on an active ax25 channel. */
--
2.30.2
From: Dongliang Mu <[email protected]>
[ Upstream commit 56b786d86694e079d8aad9b314e015cd4ac02a3d ]
The commit 46a8b29c6306 ("net: usb: fix memory leak in smsc75xx_bind")
fails to clean up the work scheduled in smsc75xx_reset->
smsc75xx_set_multicast, which leads to use-after-free if the work is
scheduled to start after the deallocation. In addition, this patch
also removes a dangling pointer - dev->data[0].
This patch calls cancel_work_sync to cancel the scheduled work and set
the dangling pointer to NULL.
Fixes: 46a8b29c6306 ("net: usb: fix memory leak in smsc75xx_bind")
Signed-off-by: Dongliang Mu <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/usb/smsc75xx.c | 10 ++++++----
1 file changed, 6 insertions(+), 4 deletions(-)
diff --git a/drivers/net/usb/smsc75xx.c b/drivers/net/usb/smsc75xx.c
index d44657b54d2b..378a12ae2d95 100644
--- a/drivers/net/usb/smsc75xx.c
+++ b/drivers/net/usb/smsc75xx.c
@@ -1483,7 +1483,7 @@ static int smsc75xx_bind(struct usbnet *dev, struct usb_interface *intf)
ret = smsc75xx_wait_ready(dev, 0);
if (ret < 0) {
netdev_warn(dev->net, "device not ready in smsc75xx_bind\n");
- goto err;
+ goto free_pdata;
}
smsc75xx_init_mac_address(dev);
@@ -1492,7 +1492,7 @@ static int smsc75xx_bind(struct usbnet *dev, struct usb_interface *intf)
ret = smsc75xx_reset(dev);
if (ret < 0) {
netdev_warn(dev->net, "smsc75xx_reset error %d\n", ret);
- goto err;
+ goto cancel_work;
}
dev->net->netdev_ops = &smsc75xx_netdev_ops;
@@ -1503,8 +1503,11 @@ static int smsc75xx_bind(struct usbnet *dev, struct usb_interface *intf)
dev->net->max_mtu = MAX_SINGLE_PACKET_SIZE;
return 0;
-err:
+cancel_work:
+ cancel_work_sync(&pdata->set_multicast);
+free_pdata:
kfree(pdata);
+ dev->data[0] = 0;
return ret;
}
@@ -1515,7 +1518,6 @@ static void smsc75xx_unbind(struct usbnet *dev, struct usb_interface *intf)
cancel_work_sync(&pdata->set_multicast);
netif_dbg(dev, ifdown, dev->net, "free pdata\n");
kfree(pdata);
- pdata = NULL;
dev->data[0] = 0;
}
}
--
2.30.2
From: Aya Levin <[email protected]>
[ Upstream commit 0232fc2ddcf4ffe01069fd1aa07922652120f44a ]
Reset only the index part of the mkey and keep the variant part. On
devlink reload, driver recreates mkeys, so the mkey index may change.
Trying to preserve the variant part of the mkey, driver mistakenly
merged the mkey index with current value. In case of a devlink reload,
current value of index part is dirty, so the index may be corrupted.
Fixes: 54c62e13ad76 ("{IB,net}/mlx5: Setup mkey variant before mr create command invocation")
Signed-off-by: Aya Levin <[email protected]>
Signed-off-by: Amir Tzin <[email protected]>
Reviewed-by: Tariq Toukan <[email protected]>
Signed-off-by: Saeed Mahameed <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/mellanox/mlx5/core/mr.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/mr.c b/drivers/net/ethernet/mellanox/mlx5/core/mr.c
index 9eb51f06d3ae..d1972508338c 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/mr.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/mr.c
@@ -54,7 +54,7 @@ int mlx5_core_create_mkey(struct mlx5_core_dev *dev,
mkey_index = MLX5_GET(create_mkey_out, lout, mkey_index);
mkey->iova = MLX5_GET64(mkc, mkc, start_addr);
mkey->size = MLX5_GET64(mkc, mkc, len);
- mkey->key |= mlx5_idx_to_mkey(mkey_index);
+ mkey->key = (u32)mlx5_mkey_variant(mkey->key) | mlx5_idx_to_mkey(mkey_index);
mkey->pd = MLX5_GET(mkc, mkc, pd);
mlx5_core_dbg(dev, "out 0x%x, mkey 0x%x\n", mkey_index, mkey->key);
--
2.30.2
From: Chengyang Fan <[email protected]>
[ Upstream commit d8e2973029b8b2ce477b564824431f3385c77083 ]
BUG: memory leak
unreferenced object 0xffff888101bc4c00 (size 32):
comm "syz-executor527", pid 360, jiffies 4294807421 (age 19.329s)
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
01 00 00 00 00 00 00 00 ac 14 14 bb 00 00 02 00 ................
backtrace:
[<00000000f17c5244>] kmalloc include/linux/slab.h:558 [inline]
[<00000000f17c5244>] kzalloc include/linux/slab.h:688 [inline]
[<00000000f17c5244>] ip_mc_add1_src net/ipv4/igmp.c:1971 [inline]
[<00000000f17c5244>] ip_mc_add_src+0x95f/0xdb0 net/ipv4/igmp.c:2095
[<000000001cb99709>] ip_mc_source+0x84c/0xea0 net/ipv4/igmp.c:2416
[<0000000052cf19ed>] do_ip_setsockopt net/ipv4/ip_sockglue.c:1294 [inline]
[<0000000052cf19ed>] ip_setsockopt+0x114b/0x30c0 net/ipv4/ip_sockglue.c:1423
[<00000000477edfbc>] raw_setsockopt+0x13d/0x170 net/ipv4/raw.c:857
[<00000000e75ca9bb>] __sys_setsockopt+0x158/0x270 net/socket.c:2117
[<00000000bdb993a8>] __do_sys_setsockopt net/socket.c:2128 [inline]
[<00000000bdb993a8>] __se_sys_setsockopt net/socket.c:2125 [inline]
[<00000000bdb993a8>] __x64_sys_setsockopt+0xba/0x150 net/socket.c:2125
[<000000006a1ffdbd>] do_syscall_64+0x40/0x80 arch/x86/entry/common.c:47
[<00000000b11467c4>] entry_SYSCALL_64_after_hwframe+0x44/0xae
In commit 24803f38a5c0 ("igmp: do not remove igmp souce list info when set
link down"), the ip_mc_clear_src() in ip_mc_destroy_dev() was removed,
because it was also called in igmpv3_clear_delrec().
Rough callgraph:
inetdev_destroy
-> ip_mc_destroy_dev
-> igmpv3_clear_delrec
-> ip_mc_clear_src
-> RCU_INIT_POINTER(dev->ip_ptr, NULL)
However, ip_mc_clear_src() called in igmpv3_clear_delrec() doesn't
release in_dev->mc_list->sources. And RCU_INIT_POINTER() assigns the
NULL to dev->ip_ptr. As a result, in_dev cannot be obtained through
inetdev_by_index() and then in_dev->mc_list->sources cannot be released
by ip_mc_del1_src() in the sock_close. Rough call sequence goes like:
sock_close
-> __sock_release
-> inet_release
-> ip_mc_drop_socket
-> inetdev_by_index
-> ip_mc_leave_src
-> ip_mc_del_src
-> ip_mc_del1_src
So we still need to call ip_mc_clear_src() in ip_mc_destroy_dev() to free
in_dev->mc_list->sources.
Fixes: 24803f38a5c0 ("igmp: do not remove igmp souce list info ...")
Reported-by: Hulk Robot <[email protected]>
Signed-off-by: Chengyang Fan <[email protected]>
Acked-by: Hangbin Liu <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/ipv4/igmp.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/net/ipv4/igmp.c b/net/ipv4/igmp.c
index 7b272bbed2b4..6b3c558a4f23 100644
--- a/net/ipv4/igmp.c
+++ b/net/ipv4/igmp.c
@@ -1801,6 +1801,7 @@ void ip_mc_destroy_dev(struct in_device *in_dev)
while ((i = rtnl_dereference(in_dev->mc_list)) != NULL) {
in_dev->mc_list = i->next_rcu;
in_dev->mc_count--;
+ ip_mc_clear_src(i);
ip_ma_put(i);
}
}
--
2.30.2
From: Jim Mattson <[email protected]>
[ Upstream commit 218bf772bddd221489c38dde6ef8e917131161f6 ]
Per the SDM, "any access that touches bytes 4 through 15 of an APIC
register may cause undefined behavior and must not be executed."
Worse, such an access in kvm_lapic_reg_read can result in a leak of
kernel stack contents. Prior to commit 01402cf81051 ("kvm: LAPIC:
write down valid APIC registers"), such an access was explicitly
disallowed. Restore the guard that was removed in that commit.
Fixes: 01402cf81051 ("kvm: LAPIC: write down valid APIC registers")
Signed-off-by: Jim Mattson <[email protected]>
Reported-by: syzbot <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/x86/kvm/lapic.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/arch/x86/kvm/lapic.c b/arch/x86/kvm/lapic.c
index 5759eb075d2f..677d21082454 100644
--- a/arch/x86/kvm/lapic.c
+++ b/arch/x86/kvm/lapic.c
@@ -1405,6 +1405,9 @@ int kvm_lapic_reg_read(struct kvm_lapic *apic, u32 offset, int len,
if (!apic_x2apic_mode(apic))
valid_reg_mask |= APIC_REG_MASK(APIC_ARBPRI);
+ if (alignment + len > 4)
+ return 1;
+
if (offset > 0x3f0 || !(valid_reg_mask & APIC_REG_MASK(offset)))
return 1;
--
2.30.2
From: Pavel Skripkin <[email protected]>
[ Upstream commit ad9d24c9429e2159d1e279dc3a83191ccb4daf1d ]
Syzbot reported slab-out-of-bounds Read in
qrtr_endpoint_post. The problem was in wrong
_size_ type:
if (len != ALIGN(size, 4) + hdrlen)
goto err;
If size from qrtr_hdr is 4294967293 (0xfffffffd), the result of
ALIGN(size, 4) will be 0. In case of len == hdrlen and size == 4294967293
in header this check won't fail and
skb_put_data(skb, data + hdrlen, size);
will read out of bound from data, which is hdrlen allocated block.
Fixes: 194ccc88297a ("net: qrtr: Support decoding incoming v2 packets")
Reported-and-tested-by: [email protected]
Signed-off-by: Pavel Skripkin <[email protected]>
Reviewed-by: Bjorn Andersson <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/qrtr/qrtr.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/net/qrtr/qrtr.c b/net/qrtr/qrtr.c
index 93a7edcff11e..0d9baddb9cd4 100644
--- a/net/qrtr/qrtr.c
+++ b/net/qrtr/qrtr.c
@@ -429,7 +429,7 @@ int qrtr_endpoint_post(struct qrtr_endpoint *ep, const void *data, size_t len)
struct qrtr_sock *ipc;
struct sk_buff *skb;
struct qrtr_cb *cb;
- unsigned int size;
+ size_t size;
unsigned int ver;
size_t hdrlen;
--
2.30.2
From: Paolo Abeni <[email protected]>
[ Upstream commit 72f961320d5d15bfcb26dbe3edaa3f7d25fd2c8a ]
If the host is under sever memory pressure, and RX forward
memory allocation for the msk fails, we try to borrow the
required memory from the ingress subflow.
The current attempt is a bit flaky: if skb->truesize is less
than SK_MEM_QUANTUM, the ssk will not release any memory, and
the next schedule will fail again.
Instead, directly move the required amount of pages from the
ssk to the msk, if available
Fixes: 9c3f94e1681b ("mptcp: add missing memory scheduling in the rx path")
Signed-off-by: Paolo Abeni <[email protected]>
Signed-off-by: Mat Martineau <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/mptcp/protocol.c | 10 ++++++----
1 file changed, 6 insertions(+), 4 deletions(-)
diff --git a/net/mptcp/protocol.c b/net/mptcp/protocol.c
index 7832b20baac2..3ca8b359e399 100644
--- a/net/mptcp/protocol.c
+++ b/net/mptcp/protocol.c
@@ -276,11 +276,13 @@ static bool __mptcp_move_skb(struct mptcp_sock *msk, struct sock *ssk,
/* try to fetch required memory from subflow */
if (!sk_rmem_schedule(sk, skb, skb->truesize)) {
- if (ssk->sk_forward_alloc < skb->truesize)
- goto drop;
- __sk_mem_reclaim(ssk, skb->truesize);
- if (!sk_rmem_schedule(sk, skb, skb->truesize))
+ int amount = sk_mem_pages(skb->truesize) << SK_MEM_QUANTUM_SHIFT;
+
+ if (ssk->sk_forward_alloc < amount)
goto drop;
+
+ ssk->sk_forward_alloc -= amount;
+ sk->sk_forward_alloc += amount;
}
/* the skb map_seq accounts for the skb offset:
--
2.30.2
From: Linyu Yuan <[email protected]>
[ Upstream commit c3b26fdf1b32f91c7a3bc743384b4a298ab53ad7 ]
when usbnet transmit a skb, eem fixup it in eem_tx_fixup(),
if skb_copy_expand() failed, it return NULL,
usbnet_start_xmit() will have no chance to free original skb.
fix it by free orginal skb in eem_tx_fixup() first,
then check skb clone status, if failed, return NULL to usbnet.
Fixes: 9f722c0978b0 ("usbnet: CDC EEM support (v5)")
Signed-off-by: Linyu Yuan <[email protected]>
Reviewed-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/usb/cdc_eem.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/usb/cdc_eem.c b/drivers/net/usb/cdc_eem.c
index 0eeec80bec31..e4a570366646 100644
--- a/drivers/net/usb/cdc_eem.c
+++ b/drivers/net/usb/cdc_eem.c
@@ -123,10 +123,10 @@ static struct sk_buff *eem_tx_fixup(struct usbnet *dev, struct sk_buff *skb,
}
skb2 = skb_copy_expand(skb, EEM_HEAD, ETH_FCS_LEN + padlen, flags);
+ dev_kfree_skb_any(skb);
if (!skb2)
return NULL;
- dev_kfree_skb_any(skb);
skb = skb2;
done:
--
2.30.2
From: Subash Abhinov Kasiviswanathan <[email protected]>
[ Upstream commit b7f5eb6ba21b0b54b04918fc9df13309ff3c67b8 ]
Packets sent by rmnet to the real device have variable MAP header
lengths based on the data format configured. This patch adds checks
to ensure that the real device MTU is sufficient to transmit the MAP
packet comprising of the MAP header and the IP packet. This check
is enforced when rmnet devices are created and updated and during
MTU updates of both the rmnet and real device.
Additionally, rmnet devices now have a default MTU configured which
accounts for the real device MTU and the headroom based on the data
format.
Signed-off-by: Sean Tranchetti <[email protected]>
Signed-off-by: Subash Abhinov Kasiviswanathan <[email protected]>
Tested-by: Loic Poulain <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
.../ethernet/qualcomm/rmnet/rmnet_config.c | 15 +++-
.../ethernet/qualcomm/rmnet/rmnet_config.h | 2 +
.../net/ethernet/qualcomm/rmnet/rmnet_vnd.c | 73 ++++++++++++++++++-
.../net/ethernet/qualcomm/rmnet/rmnet_vnd.h | 3 +
4 files changed, 90 insertions(+), 3 deletions(-)
diff --git a/drivers/net/ethernet/qualcomm/rmnet/rmnet_config.c b/drivers/net/ethernet/qualcomm/rmnet/rmnet_config.c
index fcdecddb2812..8d51b0cb545c 100644
--- a/drivers/net/ethernet/qualcomm/rmnet/rmnet_config.c
+++ b/drivers/net/ethernet/qualcomm/rmnet/rmnet_config.c
@@ -26,7 +26,7 @@ static int rmnet_is_real_dev_registered(const struct net_device *real_dev)
}
/* Needs rtnl lock */
-static struct rmnet_port*
+struct rmnet_port*
rmnet_get_port_rtnl(const struct net_device *real_dev)
{
return rtnl_dereference(real_dev->rx_handler_data);
@@ -253,7 +253,10 @@ static int rmnet_config_notify_cb(struct notifier_block *nb,
netdev_dbg(real_dev, "Kernel unregister\n");
rmnet_force_unassociate_device(real_dev);
break;
-
+ case NETDEV_CHANGEMTU:
+ if (rmnet_vnd_validate_real_dev_mtu(real_dev))
+ return NOTIFY_BAD;
+ break;
default:
break;
}
@@ -329,9 +332,17 @@ static int rmnet_changelink(struct net_device *dev, struct nlattr *tb[],
if (data[IFLA_RMNET_FLAGS]) {
struct ifla_rmnet_flags *flags;
+ u32 old_data_format;
+ old_data_format = port->data_format;
flags = nla_data(data[IFLA_RMNET_FLAGS]);
port->data_format = flags->flags & flags->mask;
+
+ if (rmnet_vnd_update_dev_mtu(port, real_dev)) {
+ port->data_format = old_data_format;
+ NL_SET_ERR_MSG_MOD(extack, "Invalid MTU on real dev");
+ return -EINVAL;
+ }
}
return 0;
diff --git a/drivers/net/ethernet/qualcomm/rmnet/rmnet_config.h b/drivers/net/ethernet/qualcomm/rmnet/rmnet_config.h
index be515982d628..8d8d4690a074 100644
--- a/drivers/net/ethernet/qualcomm/rmnet/rmnet_config.h
+++ b/drivers/net/ethernet/qualcomm/rmnet/rmnet_config.h
@@ -73,4 +73,6 @@ int rmnet_add_bridge(struct net_device *rmnet_dev,
struct netlink_ext_ack *extack);
int rmnet_del_bridge(struct net_device *rmnet_dev,
struct net_device *slave_dev);
+struct rmnet_port*
+rmnet_get_port_rtnl(const struct net_device *real_dev);
#endif /* _RMNET_CONFIG_H_ */
diff --git a/drivers/net/ethernet/qualcomm/rmnet/rmnet_vnd.c b/drivers/net/ethernet/qualcomm/rmnet/rmnet_vnd.c
index d58b51d277f1..6cf46f893fb9 100644
--- a/drivers/net/ethernet/qualcomm/rmnet/rmnet_vnd.c
+++ b/drivers/net/ethernet/qualcomm/rmnet/rmnet_vnd.c
@@ -58,9 +58,30 @@ static netdev_tx_t rmnet_vnd_start_xmit(struct sk_buff *skb,
return NETDEV_TX_OK;
}
+static int rmnet_vnd_headroom(struct rmnet_port *port)
+{
+ u32 headroom;
+
+ headroom = sizeof(struct rmnet_map_header);
+
+ if (port->data_format & RMNET_FLAGS_EGRESS_MAP_CKSUMV4)
+ headroom += sizeof(struct rmnet_map_ul_csum_header);
+
+ return headroom;
+}
+
static int rmnet_vnd_change_mtu(struct net_device *rmnet_dev, int new_mtu)
{
- if (new_mtu < 0 || new_mtu > RMNET_MAX_PACKET_SIZE)
+ struct rmnet_priv *priv = netdev_priv(rmnet_dev);
+ struct rmnet_port *port;
+ u32 headroom;
+
+ port = rmnet_get_port_rtnl(priv->real_dev);
+
+ headroom = rmnet_vnd_headroom(port);
+
+ if (new_mtu < 0 || new_mtu > RMNET_MAX_PACKET_SIZE ||
+ new_mtu > (priv->real_dev->mtu - headroom))
return -EINVAL;
rmnet_dev->mtu = new_mtu;
@@ -229,6 +250,7 @@ int rmnet_vnd_newlink(u8 id, struct net_device *rmnet_dev,
{
struct rmnet_priv *priv = netdev_priv(rmnet_dev);
+ u32 headroom;
int rc;
if (rmnet_get_endpoint(port, id)) {
@@ -242,6 +264,13 @@ int rmnet_vnd_newlink(u8 id, struct net_device *rmnet_dev,
priv->real_dev = real_dev;
+ headroom = rmnet_vnd_headroom(port);
+
+ if (rmnet_vnd_change_mtu(rmnet_dev, real_dev->mtu - headroom)) {
+ NL_SET_ERR_MSG_MOD(extack, "Invalid MTU on real dev");
+ return -EINVAL;
+ }
+
rc = register_netdevice(rmnet_dev);
if (!rc) {
ep->egress_dev = rmnet_dev;
@@ -283,3 +312,45 @@ int rmnet_vnd_do_flow_control(struct net_device *rmnet_dev, int enable)
return 0;
}
+
+int rmnet_vnd_validate_real_dev_mtu(struct net_device *real_dev)
+{
+ struct hlist_node *tmp_ep;
+ struct rmnet_endpoint *ep;
+ struct rmnet_port *port;
+ unsigned long bkt_ep;
+ u32 headroom;
+
+ port = rmnet_get_port_rtnl(real_dev);
+
+ headroom = rmnet_vnd_headroom(port);
+
+ hash_for_each_safe(port->muxed_ep, bkt_ep, tmp_ep, ep, hlnode) {
+ if (ep->egress_dev->mtu > (real_dev->mtu - headroom))
+ return -1;
+ }
+
+ return 0;
+}
+
+int rmnet_vnd_update_dev_mtu(struct rmnet_port *port,
+ struct net_device *real_dev)
+{
+ struct hlist_node *tmp_ep;
+ struct rmnet_endpoint *ep;
+ unsigned long bkt_ep;
+ u32 headroom;
+
+ headroom = rmnet_vnd_headroom(port);
+
+ hash_for_each_safe(port->muxed_ep, bkt_ep, tmp_ep, ep, hlnode) {
+ if (ep->egress_dev->mtu <= (real_dev->mtu - headroom))
+ continue;
+
+ if (rmnet_vnd_change_mtu(ep->egress_dev,
+ real_dev->mtu - headroom))
+ return -1;
+ }
+
+ return 0;
+}
\ No newline at end of file
diff --git a/drivers/net/ethernet/qualcomm/rmnet/rmnet_vnd.h b/drivers/net/ethernet/qualcomm/rmnet/rmnet_vnd.h
index 4967f3461ed1..dc3a4443ef0a 100644
--- a/drivers/net/ethernet/qualcomm/rmnet/rmnet_vnd.h
+++ b/drivers/net/ethernet/qualcomm/rmnet/rmnet_vnd.h
@@ -18,4 +18,7 @@ int rmnet_vnd_dellink(u8 id, struct rmnet_port *port,
void rmnet_vnd_rx_fixup(struct sk_buff *skb, struct net_device *dev);
void rmnet_vnd_tx_fixup(struct sk_buff *skb, struct net_device *dev);
void rmnet_vnd_setup(struct net_device *dev);
+int rmnet_vnd_validate_real_dev_mtu(struct net_device *real_dev);
+int rmnet_vnd_update_dev_mtu(struct rmnet_port *port,
+ struct net_device *real_dev);
#endif /* _RMNET_VND_H_ */
--
2.30.2
From: Michael Chan <[email protected]>
[ Upstream commit 0afd6a4e8028cc487c240b6cfe04094e45a306e4 ]
There is a missing bnxt_probe_phy() call in bnxt_fw_init_one() to
rediscover the PHY capabilities after a firmware reset. This can cause
some PHY related functionalities to fail after a firmware reset. For
example, in multi-host, the ability for any host to configure the PHY
settings may be lost after a firmware reset.
Fixes: ec5d31e3c15d ("bnxt_en: Handle firmware reset status during IF_UP.")
Signed-off-by: Michael Chan <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/broadcom/bnxt/bnxt.c | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.c b/drivers/net/ethernet/broadcom/bnxt/bnxt.c
index adfaa9a850dd..70c03c156e00 100644
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt.c
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.c
@@ -11353,6 +11353,8 @@ static void bnxt_fw_init_one_p3(struct bnxt *bp)
bnxt_hwrm_coal_params_qcaps(bp);
}
+static int bnxt_probe_phy(struct bnxt *bp, bool fw_dflt);
+
static int bnxt_fw_init_one(struct bnxt *bp)
{
int rc;
@@ -11367,6 +11369,9 @@ static int bnxt_fw_init_one(struct bnxt *bp)
netdev_err(bp->dev, "Firmware init phase 2 failed\n");
return rc;
}
+ rc = bnxt_probe_phy(bp, false);
+ if (rc)
+ return rc;
rc = bnxt_approve_mac(bp, bp->dev->dev_addr, false);
if (rc)
return rc;
--
2.30.2
From: Axel Lin <[email protected]>
[ Upstream commit 3d681804efcb6e5d8089a433402e19179347d7ae ]
Show proper error code instead of 0.
Signed-off-by: Axel Lin <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/regulator/cros-ec-regulator.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/regulator/cros-ec-regulator.c b/drivers/regulator/cros-ec-regulator.c
index eb3fc1db4edc..c4754f3cf233 100644
--- a/drivers/regulator/cros-ec-regulator.c
+++ b/drivers/regulator/cros-ec-regulator.c
@@ -225,8 +225,9 @@ static int cros_ec_regulator_probe(struct platform_device *pdev)
drvdata->dev = devm_regulator_register(dev, &drvdata->desc, &cfg);
if (IS_ERR(drvdata->dev)) {
+ ret = PTR_ERR(drvdata->dev);
dev_err(&pdev->dev, "Failed to register regulator: %d\n", ret);
- return PTR_ERR(drvdata->dev);
+ return ret;
}
platform_set_drvdata(pdev, drvdata);
--
2.30.2
From: Til Jasper Ullrich <[email protected]>
[ Upstream commit c0e0436cb4f6627146acdae8c77828f18db01151 ]
The X1 Carbon Gen 9 uses two fans instead of one like the previous
generation. This adds support for the second fan. It has been tested
on my X1 Carbon Gen 9 (20XXS00100) and works fine.
Signed-off-by: Til Jasper Ullrich <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Hans de Goede <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/platform/x86/thinkpad_acpi.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/platform/x86/thinkpad_acpi.c b/drivers/platform/x86/thinkpad_acpi.c
index 1c25af28a723..5c2f2e337b57 100644
--- a/drivers/platform/x86/thinkpad_acpi.c
+++ b/drivers/platform/x86/thinkpad_acpi.c
@@ -8806,6 +8806,7 @@ static const struct tpacpi_quirk fan_quirk_table[] __initconst = {
TPACPI_Q_LNV3('N', '2', 'O', TPACPI_FAN_2CTL), /* P1 / X1 Extreme (2nd gen) */
TPACPI_Q_LNV3('N', '2', 'V', TPACPI_FAN_2CTL), /* P1 / X1 Extreme (3nd gen) */
TPACPI_Q_LNV3('N', '3', '0', TPACPI_FAN_2CTL), /* P15 (1st gen) / P15v (1st gen) */
+ TPACPI_Q_LNV3('N', '3', '2', TPACPI_FAN_2CTL), /* X1 Carbon (9th gen) */
};
static int __init fan_init(struct ibm_init_struct *iibm)
--
2.30.2
From: Pavel Machek <[email protected]>
[ Upstream commit 39eb028183bc7378bb6187067e20bf6d8c836407 ]
While fixing coverity warning, commit dd2c79677375 introduced typo in
shift value. Fix that.
Signed-off-by: Pavel Machek (CIP) <[email protected]>
Fixes: dd2c79677375 ("cxgb4: Fix unintentional sign extension issues")
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/chelsio/cxgb4/cxgb4_filter.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_filter.c b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_filter.c
index e664e05b9f02..5fbc087268db 100644
--- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_filter.c
+++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_filter.c
@@ -198,7 +198,7 @@ static void set_nat_params(struct adapter *adap, struct filter_entry *f,
WORD_MASK, f->fs.nat_lip[3] |
f->fs.nat_lip[2] << 8 |
f->fs.nat_lip[1] << 16 |
- (u64)f->fs.nat_lip[0] << 25, 1);
+ (u64)f->fs.nat_lip[0] << 24, 1);
}
}
--
2.30.2
From: Petr Machata <[email protected]>
[ Upstream commit 306b9228c097b4101c150ccd262372ded8348644 ]
A max-shaper is the HW component responsible for delaying egress traffic
above a configured transmission rate. Burst size is the amount of traffic
that is allowed to pass without accounting. The burst size value needs to
be such that it can be expressed as 2^BS * 512 bits, where BS lies in a
certain ASIC-dependent range. mlxsw enforces that this holds before
attempting to configure the shaper.
The assumption for Spectrum-3 was that the lower limit of BS would be 5,
like for Spectrum-1. But as of now, the limit is still 11. Therefore fix
the driver accordingly, so that incorrect values are rejected early with a
proper message.
Fixes: 23effa2479ba ("mlxsw: reg: Add max_shaper_bs to QoS ETS Element Configuration")
Reported-by: Maksym Yaremchuk <[email protected]>
Signed-off-by: Petr Machata <[email protected]>
Signed-off-by: Ido Schimmel <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/mellanox/mlxsw/reg.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/mellanox/mlxsw/reg.h b/drivers/net/ethernet/mellanox/mlxsw/reg.h
index 3c3069afc0a3..c670bf3464c2 100644
--- a/drivers/net/ethernet/mellanox/mlxsw/reg.h
+++ b/drivers/net/ethernet/mellanox/mlxsw/reg.h
@@ -3641,7 +3641,7 @@ MLXSW_ITEM32(reg, qeec, max_shaper_bs, 0x1C, 0, 6);
#define MLXSW_REG_QEEC_HIGHEST_SHAPER_BS 25
#define MLXSW_REG_QEEC_LOWEST_SHAPER_BS_SP1 5
#define MLXSW_REG_QEEC_LOWEST_SHAPER_BS_SP2 11
-#define MLXSW_REG_QEEC_LOWEST_SHAPER_BS_SP3 5
+#define MLXSW_REG_QEEC_LOWEST_SHAPER_BS_SP3 11
static inline void mlxsw_reg_qeec_pack(char *payload, u8 local_port,
enum mlxsw_reg_qeec_hr hr, u8 index,
--
2.30.2
From: Parav Pandit <[email protected]>
[ Upstream commit ca36fc4d77b35b8d142cf1ed0eae5ec2e071dc3c ]
E-switch should be able to set the GUID of host PF vport.
Currently it returns an error. This results in below error
when user attempts to configure MAC address of the PF of an
external controller.
$ devlink port function set pci/0000:03:00.0/196608 \
hw_addr 00:00:00:11:22:33
mlx5_core 0000:03:00.0: mlx5_esw_set_vport_mac_locked:1876:(pid 6715):\
"Failed to set vport 0 node guid, err = -22.
RDMA_CM will not function properly for this VF."
Check for zero vport is no longer needed.
Fixes: 330077d14de1 ("net/mlx5: E-switch, Supporting setting devlink port function mac address")
Signed-off-by: Yuval Avnery <[email protected]>
Signed-off-by: Parav Pandit <[email protected]>
Reviewed-by: Bodong Wang <[email protected]>
Reviewed-by: Alaa Hleihel <[email protected]>
Signed-off-by: Saeed Mahameed <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/mellanox/mlx5/core/vport.c | 2 --
1 file changed, 2 deletions(-)
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/vport.c b/drivers/net/ethernet/mellanox/mlx5/core/vport.c
index bdafc85fd874..fc91bbf7d0c3 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/vport.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/vport.c
@@ -464,8 +464,6 @@ int mlx5_modify_nic_vport_node_guid(struct mlx5_core_dev *mdev,
void *in;
int err;
- if (!vport)
- return -EINVAL;
if (!MLX5_CAP_GEN(mdev, vport_group_manager))
return -EACCES;
--
2.30.2
From: Joakim Zhang <[email protected]>
[ Upstream commit d23765646e71b43ed2b809930411ba5c0aadee7b ]
Commit da722186f654 ("net: fec: set GPR bit on suspend by DT configuration.")
refactor the fec_devtype, need adjust ptp driver accordingly.
Fixes: da722186f654 ("net: fec: set GPR bit on suspend by DT configuration.")
Signed-off-by: Joakim Zhang <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/freescale/fec_ptp.c | 4 +---
1 file changed, 1 insertion(+), 3 deletions(-)
diff --git a/drivers/net/ethernet/freescale/fec_ptp.c b/drivers/net/ethernet/freescale/fec_ptp.c
index 1753807cbf97..ce8e5555f3e0 100644
--- a/drivers/net/ethernet/freescale/fec_ptp.c
+++ b/drivers/net/ethernet/freescale/fec_ptp.c
@@ -215,15 +215,13 @@ static u64 fec_ptp_read(const struct cyclecounter *cc)
{
struct fec_enet_private *fep =
container_of(cc, struct fec_enet_private, cc);
- const struct platform_device_id *id_entry =
- platform_get_device_id(fep->pdev);
u32 tempval;
tempval = readl(fep->hwp + FEC_ATIME_CTRL);
tempval |= FEC_T_CTRL_CAPTURE;
writel(tempval, fep->hwp + FEC_ATIME_CTRL);
- if (id_entry->driver_data & FEC_QUIRK_BUG_CAPTURE)
+ if (fep->quirks & FEC_QUIRK_BUG_CAPTURE)
udelay(1);
return readl(fep->hwp + FEC_ATIME);
--
2.30.2
From: Daniel Borkmann <[email protected]>
[ Upstream commit 9183671af6dbf60a1219371d4ed73e23f43b49db ]
The verifier only enumerates valid control-flow paths and skips paths that
are unreachable in the non-speculative domain. And so it can miss issues
under speculative execution on mispredicted branches.
For example, a type confusion has been demonstrated with the following
crafted program:
// r0 = pointer to a map array entry
// r6 = pointer to readable stack slot
// r9 = scalar controlled by attacker
1: r0 = *(u64 *)(r0) // cache miss
2: if r0 != 0x0 goto line 4
3: r6 = r9
4: if r0 != 0x1 goto line 6
5: r9 = *(u8 *)(r6)
6: // leak r9
Since line 3 runs iff r0 == 0 and line 5 runs iff r0 == 1, the verifier
concludes that the pointer dereference on line 5 is safe. But: if the
attacker trains both the branches to fall-through, such that the following
is speculatively executed ...
r6 = r9
r9 = *(u8 *)(r6)
// leak r9
... then the program will dereference an attacker-controlled value and could
leak its content under speculative execution via side-channel. This requires
to mistrain the branch predictor, which can be rather tricky, because the
branches are mutually exclusive. However such training can be done at
congruent addresses in user space using different branches that are not
mutually exclusive. That is, by training branches in user space ...
A: if r0 != 0x0 goto line C
B: ...
C: if r0 != 0x0 goto line D
D: ...
... such that addresses A and C collide to the same CPU branch prediction
entries in the PHT (pattern history table) as those of the BPF program's
lines 2 and 4, respectively. A non-privileged attacker could simply brute
force such collisions in the PHT until observing the attack succeeding.
Alternative methods to mistrain the branch predictor are also possible that
avoid brute forcing the collisions in the PHT. A reliable attack has been
demonstrated, for example, using the following crafted program:
// r0 = pointer to a [control] map array entry
// r7 = *(u64 *)(r0 + 0), training/attack phase
// r8 = *(u64 *)(r0 + 8), oob address
// [...]
// r0 = pointer to a [data] map array entry
1: if r7 == 0x3 goto line 3
2: r8 = r0
// crafted sequence of conditional jumps to separate the conditional
// branch in line 193 from the current execution flow
3: if r0 != 0x0 goto line 5
4: if r0 == 0x0 goto exit
5: if r0 != 0x0 goto line 7
6: if r0 == 0x0 goto exit
[...]
187: if r0 != 0x0 goto line 189
188: if r0 == 0x0 goto exit
// load any slowly-loaded value (due to cache miss in phase 3) ...
189: r3 = *(u64 *)(r0 + 0x1200)
// ... and turn it into known zero for verifier, while preserving slowly-
// loaded dependency when executing:
190: r3 &= 1
191: r3 &= 2
// speculatively bypassed phase dependency
192: r7 += r3
193: if r7 == 0x3 goto exit
194: r4 = *(u8 *)(r8 + 0)
// leak r4
As can be seen, in training phase (phase != 0x3), the condition in line 1
turns into false and therefore r8 with the oob address is overridden with
the valid map value address, which in line 194 we can read out without
issues. However, in attack phase, line 2 is skipped, and due to the cache
miss in line 189 where the map value is (zeroed and later) added to the
phase register, the condition in line 193 takes the fall-through path due
to prior branch predictor training, where under speculation, it'll load the
byte at oob address r8 (unknown scalar type at that point) which could then
be leaked via side-channel.
One way to mitigate these is to 'branch off' an unreachable path, meaning,
the current verification path keeps following the is_branch_taken() path
and we push the other branch to the verification stack. Given this is
unreachable from the non-speculative domain, this branch's vstate is
explicitly marked as speculative. This is needed for two reasons: i) if
this path is solely seen from speculative execution, then we later on still
want the dead code elimination to kick in in order to sanitize these
instructions with jmp-1s, and ii) to ensure that paths walked in the
non-speculative domain are not pruned from earlier walks of paths walked in
the speculative domain. Additionally, for robustness, we mark the registers
which have been part of the conditional as unknown in the speculative path
given there should be no assumptions made on their content.
The fix in here mitigates type confusion attacks described earlier due to
i) all code paths in the BPF program being explored and ii) existing
verifier logic already ensuring that given memory access instruction
references one specific data structure.
An alternative to this fix that has also been looked at in this scope was to
mark aux->alu_state at the jump instruction with a BPF_JMP_TAKEN state as
well as direction encoding (always-goto, always-fallthrough, unknown), such
that mixing of different always-* directions themselves as well as mixing of
always-* with unknown directions would cause a program rejection by the
verifier, e.g. programs with constructs like 'if ([...]) { x = 0; } else
{ x = 1; }' with subsequent 'if (x == 1) { [...] }'. For unprivileged, this
would result in only single direction always-* taken paths, and unknown taken
paths being allowed, such that the former could be patched from a conditional
jump to an unconditional jump (ja). Compared to this approach here, it would
have two downsides: i) valid programs that otherwise are not performing any
pointer arithmetic, etc, would potentially be rejected/broken, and ii) we are
required to turn off path pruning for unprivileged, where both can be avoided
in this work through pushing the invalid branch to the verification stack.
The issue was originally discovered by Adam and Ofek, and later independently
discovered and reported as a result of Benedict and Piotr's research work.
Fixes: b2157399cc98 ("bpf: prevent out-of-bounds speculation")
Reported-by: Adam Morrison <[email protected]>
Reported-by: Ofek Kirzner <[email protected]>
Reported-by: Benedict Schlueter <[email protected]>
Reported-by: Piotr Krysiuk <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Reviewed-by: John Fastabend <[email protected]>
Reviewed-by: Benedict Schlueter <[email protected]>
Reviewed-by: Piotr Krysiuk <[email protected]>
Acked-by: Alexei Starovoitov <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
kernel/bpf/verifier.c | 44 +++++++++++++++++++++++++++++++++++++++----
1 file changed, 40 insertions(+), 4 deletions(-)
diff --git a/kernel/bpf/verifier.c b/kernel/bpf/verifier.c
index 4f50d6f128be..da8fc57ff5b2 100644
--- a/kernel/bpf/verifier.c
+++ b/kernel/bpf/verifier.c
@@ -5740,6 +5740,27 @@ struct bpf_sanitize_info {
bool mask_to_left;
};
+static struct bpf_verifier_state *
+sanitize_speculative_path(struct bpf_verifier_env *env,
+ const struct bpf_insn *insn,
+ u32 next_idx, u32 curr_idx)
+{
+ struct bpf_verifier_state *branch;
+ struct bpf_reg_state *regs;
+
+ branch = push_stack(env, next_idx, curr_idx, true);
+ if (branch && insn) {
+ regs = branch->frame[branch->curframe]->regs;
+ if (BPF_SRC(insn->code) == BPF_K) {
+ mark_reg_unknown(env, regs, insn->dst_reg);
+ } else if (BPF_SRC(insn->code) == BPF_X) {
+ mark_reg_unknown(env, regs, insn->dst_reg);
+ mark_reg_unknown(env, regs, insn->src_reg);
+ }
+ }
+ return branch;
+}
+
static int sanitize_ptr_alu(struct bpf_verifier_env *env,
struct bpf_insn *insn,
const struct bpf_reg_state *ptr_reg,
@@ -5823,7 +5844,8 @@ do_sim:
tmp = *dst_reg;
*dst_reg = *ptr_reg;
}
- ret = push_stack(env, env->insn_idx + 1, env->insn_idx, true);
+ ret = sanitize_speculative_path(env, NULL, env->insn_idx + 1,
+ env->insn_idx);
if (!ptr_is_dst_reg && ret)
*dst_reg = tmp;
return !ret ? REASON_STACK : 0;
@@ -7974,14 +7996,28 @@ static int check_cond_jmp_op(struct bpf_verifier_env *env,
if (err)
return err;
}
+
if (pred == 1) {
- /* only follow the goto, ignore fall-through */
+ /* Only follow the goto, ignore fall-through. If needed, push
+ * the fall-through branch for simulation under speculative
+ * execution.
+ */
+ if (!env->bypass_spec_v1 &&
+ !sanitize_speculative_path(env, insn, *insn_idx + 1,
+ *insn_idx))
+ return -EFAULT;
*insn_idx += insn->off;
return 0;
} else if (pred == 0) {
- /* only follow fall-through branch, since
- * that's where the program will go
+ /* Only follow the fall-through branch, since that's where the
+ * program will go. If needed, push the goto branch for
+ * simulation under speculative execution.
*/
+ if (!env->bypass_spec_v1 &&
+ !sanitize_speculative_path(env, insn,
+ *insn_idx + insn->off + 1,
+ *insn_idx))
+ return -EFAULT;
return 0;
}
--
2.30.2
From: Jakub Kicinski <[email protected]>
[ Upstream commit 475b92f932168a78da8109acd10bfb7578b8f2bb ]
Scaled PPM conversion to PPB may (on 64bit systems) result
in a value larger than s32 can hold (freq/scaled_ppm is a long).
This means the kernel will not correctly reject unreasonably
high ->freq values (e.g. > 4294967295ppb, 281474976645 scaled PPM).
The conversion is equivalent to a division by ~66 (65.536),
so the value of ppb is always smaller than ppm, but not small
enough to assume narrowing the type from long -> s32 is okay.
Note that reasonable user space (e.g. ptp4l) will not use such
high values, anyway, 4289046510ppb ~= 4.3x, so the fix is
somewhat pedantic.
Fixes: d39a743511cd ("ptp: validate the requested frequency adjustment.")
Fixes: d94ba80ebbea ("ptp: Added a brand new class driver for ptp clocks.")
Signed-off-by: Jakub Kicinski <[email protected]>
Acked-by: Richard Cochran <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/ptp/ptp_clock.c | 6 +++---
include/linux/ptp_clock_kernel.h | 2 +-
2 files changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/ptp/ptp_clock.c b/drivers/ptp/ptp_clock.c
index 03a246e60fd9..21c4c34c52d8 100644
--- a/drivers/ptp/ptp_clock.c
+++ b/drivers/ptp/ptp_clock.c
@@ -63,7 +63,7 @@ static void enqueue_external_timestamp(struct timestamp_event_queue *queue,
spin_unlock_irqrestore(&queue->lock, flags);
}
-s32 scaled_ppm_to_ppb(long ppm)
+long scaled_ppm_to_ppb(long ppm)
{
/*
* The 'freq' field in the 'struct timex' is in parts per
@@ -80,7 +80,7 @@ s32 scaled_ppm_to_ppb(long ppm)
s64 ppb = 1 + ppm;
ppb *= 125;
ppb >>= 13;
- return (s32) ppb;
+ return (long) ppb;
}
EXPORT_SYMBOL(scaled_ppm_to_ppb);
@@ -138,7 +138,7 @@ static int ptp_clock_adjtime(struct posix_clock *pc, struct __kernel_timex *tx)
delta = ktime_to_ns(kt);
err = ops->adjtime(ops, delta);
} else if (tx->modes & ADJ_FREQUENCY) {
- s32 ppb = scaled_ppm_to_ppb(tx->freq);
+ long ppb = scaled_ppm_to_ppb(tx->freq);
if (ppb > ops->max_adj || ppb < -ops->max_adj)
return -ERANGE;
if (ops->adjfine)
diff --git a/include/linux/ptp_clock_kernel.h b/include/linux/ptp_clock_kernel.h
index d3e8ba5c7125..6d6b42143eff 100644
--- a/include/linux/ptp_clock_kernel.h
+++ b/include/linux/ptp_clock_kernel.h
@@ -222,7 +222,7 @@ extern int ptp_clock_index(struct ptp_clock *ptp);
* @ppm: Parts per million, but with a 16 bit binary fractional field
*/
-extern s32 scaled_ppm_to_ppb(long ppm);
+extern long scaled_ppm_to_ppb(long ppm);
/**
* ptp_find_pin() - obtain the pin index of a given auxiliary function
--
2.30.2
From: Axel Lin <[email protected]>
[ Upstream commit 0514582a1a5b4ac1a3fd64792826d392d7ae9ddc ]
The valid selectors for bd70528 bucks are 0 ~ 0xf, so the .n_voltages
should be 16 (0x10). Use 0x10 to make it consistent with BD70528_LDO_VOLTS.
Also remove redundant defines for BD70528_BUCK_VOLTS.
Signed-off-by: Axel Lin <[email protected]>
Acked-by: Matti Vaittinen <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
include/linux/mfd/rohm-bd70528.h | 4 +---
1 file changed, 1 insertion(+), 3 deletions(-)
diff --git a/include/linux/mfd/rohm-bd70528.h b/include/linux/mfd/rohm-bd70528.h
index a57af878fd0c..4a5966475a35 100644
--- a/include/linux/mfd/rohm-bd70528.h
+++ b/include/linux/mfd/rohm-bd70528.h
@@ -26,9 +26,7 @@ struct bd70528_data {
struct mutex rtc_timer_lock;
};
-#define BD70528_BUCK_VOLTS 17
-#define BD70528_BUCK_VOLTS 17
-#define BD70528_BUCK_VOLTS 17
+#define BD70528_BUCK_VOLTS 0x10
#define BD70528_LDO_VOLTS 0x20
#define BD70528_REG_BUCK1_EN 0x0F
--
2.30.2
From: Rukhsana Ansari <[email protected]>
[ Upstream commit c12e1643d2738bcd4e26252ce531878841dd3f38 ]
TQM fastpath ring needs to be sized to store both the requester
and responder side of RoCE QPs in TQM for supporting bi-directional
tests. Fix bnxt_alloc_ctx_mem() to multiply the RoCE QPs by a factor of
2 when computing the number of entries for TQM fastpath ring. This
fixes an RX pipeline stall issue when running bi-directional max
RoCE QP tests.
Fixes: c7dd7ab4b204 ("bnxt_en: Improve TQM ring context memory sizing formulas.")
Signed-off-by: Rukhsana Ansari <[email protected]>
Signed-off-by: Michael Chan <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/broadcom/bnxt/bnxt.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.c b/drivers/net/ethernet/broadcom/bnxt/bnxt.c
index 70c03c156e00..3f3d13a18992 100644
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt.c
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.c
@@ -7184,7 +7184,7 @@ skip_rdma:
entries_sp = ctx->vnic_max_vnic_entries + ctx->qp_max_l2_entries +
2 * (extra_qps + ctx->qp_min_qp1_entries) + min;
entries_sp = roundup(entries_sp, ctx->tqm_entries_multiple);
- entries = ctx->qp_max_l2_entries + extra_qps + ctx->qp_min_qp1_entries;
+ entries = ctx->qp_max_l2_entries + 2 * (extra_qps + ctx->qp_min_qp1_entries);
entries = roundup(entries, ctx->tqm_entries_multiple);
entries = clamp_t(u32, entries, min, ctx->tqm_max_entries_per_ring);
for (i = 0; i < ctx->tqm_fp_rings_count + 1; i++) {
--
2.30.2
From: Toke Høiland-Jørgensen <[email protected]>
[ Upstream commit 321827477360934dc040e9d3c626bf1de6c3ab3c ]
When constructing ICMP response messages, the kernel will try to pick a
suitable source address for the outgoing packet. However, if no IPv4
addresses are configured on the system at all, this will fail and we end up
producing an ICMP message with a source address of 0.0.0.0. This can happen
on a box routing IPv4 traffic via v6 nexthops, for instance.
Since 0.0.0.0 is not generally routable on the internet, there's a good
chance that such ICMP messages will never make it back to the sender of the
original packet that the ICMP message was sent in response to. This, in
turn, can create connectivity and PMTUd problems for senders. Fortunately,
RFC7600 reserves a dummy address to be used as a source for ICMP
messages (192.0.0.8/32), so let's teach the kernel to substitute that
address as a last resort if the regular source address selection procedure
fails.
Below is a quick example reproducing this issue with network namespaces:
ip netns add ns0
ip l add type veth peer netns ns0
ip l set dev veth0 up
ip a add 10.0.0.1/24 dev veth0
ip a add fc00:dead:cafe:42::1/64 dev veth0
ip r add 10.1.0.0/24 via inet6 fc00:dead:cafe:42::2
ip -n ns0 l set dev veth0 up
ip -n ns0 a add fc00:dead:cafe:42::2/64 dev veth0
ip -n ns0 r add 10.0.0.0/24 via inet6 fc00:dead:cafe:42::1
ip netns exec ns0 sysctl -w net.ipv4.icmp_ratelimit=0
ip netns exec ns0 sysctl -w net.ipv4.ip_forward=1
tcpdump -tpni veth0 -c 2 icmp &
ping -w 1 10.1.0.1 > /dev/null
tcpdump: verbose output suppressed, use -v[v]... for full protocol decode
listening on veth0, link-type EN10MB (Ethernet), snapshot length 262144 bytes
IP 10.0.0.1 > 10.1.0.1: ICMP echo request, id 29, seq 1, length 64
IP 0.0.0.0 > 10.0.0.1: ICMP net 10.1.0.1 unreachable, length 92
2 packets captured
2 packets received by filter
0 packets dropped by kernel
With this patch the above capture changes to:
IP 10.0.0.1 > 10.1.0.1: ICMP echo request, id 31127, seq 1, length 64
IP 192.0.0.8 > 10.0.0.1: ICMP net 10.1.0.1 unreachable, length 92
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-by: Juliusz Chroboczek <[email protected]>
Reviewed-by: David Ahern <[email protected]>
Signed-off-by: Toke Høiland-Jørgensen <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
include/uapi/linux/in.h | 3 +++
net/ipv4/icmp.c | 7 +++++++
2 files changed, 10 insertions(+)
diff --git a/include/uapi/linux/in.h b/include/uapi/linux/in.h
index 7d6687618d80..d1b327036ae4 100644
--- a/include/uapi/linux/in.h
+++ b/include/uapi/linux/in.h
@@ -289,6 +289,9 @@ struct sockaddr_in {
/* Address indicating an error return. */
#define INADDR_NONE ((unsigned long int) 0xffffffff)
+/* Dummy address for src of ICMP replies if no real address is set (RFC7600). */
+#define INADDR_DUMMY ((unsigned long int) 0xc0000008)
+
/* Network number for local host loopback. */
#define IN_LOOPBACKNET 127
diff --git a/net/ipv4/icmp.c b/net/ipv4/icmp.c
index ff3818333fcf..b71b836cc7d1 100644
--- a/net/ipv4/icmp.c
+++ b/net/ipv4/icmp.c
@@ -759,6 +759,13 @@ void __icmp_send(struct sk_buff *skb_in, int type, int code, __be32 info,
icmp_param.data_len = room;
icmp_param.head_len = sizeof(struct icmphdr);
+ /* if we don't have a source address at this point, fall back to the
+ * dummy address instead of sending out a packet with a source address
+ * of 0.0.0.0
+ */
+ if (!fl4.saddr)
+ fl4.saddr = htonl(INADDR_DUMMY);
+
icmp_push_reply(&icmp_param, &fl4, &ipc, &rt);
ende:
ip_rt_put(rt);
--
2.30.2
From: Somnath Kotur <[email protected]>
[ Upstream commit 03400aaa69f916a376e11526cf591901a96a3a5c ]
bnxt_ethtool_init() may have allocated some memory and we need to
call bnxt_ethtool_free() to properly unwind if bnxt_init_one()
fails.
Fixes: 7c3809181468 ("bnxt_en: Refactor bnxt_init_one() and turn on TPA support on 57500 chips.")
Signed-off-by: Somnath Kotur <[email protected]>
Signed-off-by: Michael Chan <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/broadcom/bnxt/bnxt.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.c b/drivers/net/ethernet/broadcom/bnxt/bnxt.c
index 3f3d13a18992..db1b89f57079 100644
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt.c
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.c
@@ -12746,6 +12746,7 @@ init_err_pci_clean:
bnxt_hwrm_func_drv_unrgtr(bp);
bnxt_free_hwrm_short_cmd_req(bp);
bnxt_free_hwrm_resources(bp);
+ bnxt_ethtool_free(bp);
kfree(bp->fw_health);
bp->fw_health = NULL;
bnxt_cleanup_pci(bp);
--
2.30.2
From: Jack Yu <[email protected]>
[ Upstream commit 6308c44ed6eeadf65c0a7ba68d609773ed860fbb ]
The power of "LDO2", "MICBIAS1" and "Mic Det Power" were powered off after
the DAPM widgets were added, and these powers were set by the JD settings
"RT5659_JD_HDA_HEADER" in the probe function. In the codec probe function,
these powers were ignored to prevent them controlled by DAPM.
Signed-off-by: Oder Chiou <[email protected]>
Signed-off-by: Jack Yu <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/soc/codecs/rt5659.c | 26 +++++++++++++++++++++-----
1 file changed, 21 insertions(+), 5 deletions(-)
diff --git a/sound/soc/codecs/rt5659.c b/sound/soc/codecs/rt5659.c
index 91a4ef7f620c..a9b079d56fd6 100644
--- a/sound/soc/codecs/rt5659.c
+++ b/sound/soc/codecs/rt5659.c
@@ -2433,13 +2433,18 @@ static int set_dmic_power(struct snd_soc_dapm_widget *w,
return 0;
}
-static const struct snd_soc_dapm_widget rt5659_dapm_widgets[] = {
+static const struct snd_soc_dapm_widget rt5659_particular_dapm_widgets[] = {
SND_SOC_DAPM_SUPPLY("LDO2", RT5659_PWR_ANLG_3, RT5659_PWR_LDO2_BIT, 0,
NULL, 0),
- SND_SOC_DAPM_SUPPLY("PLL", RT5659_PWR_ANLG_3, RT5659_PWR_PLL_BIT, 0,
- NULL, 0),
+ SND_SOC_DAPM_SUPPLY("MICBIAS1", RT5659_PWR_ANLG_2, RT5659_PWR_MB1_BIT,
+ 0, NULL, 0),
SND_SOC_DAPM_SUPPLY("Mic Det Power", RT5659_PWR_VOL,
RT5659_PWR_MIC_DET_BIT, 0, NULL, 0),
+};
+
+static const struct snd_soc_dapm_widget rt5659_dapm_widgets[] = {
+ SND_SOC_DAPM_SUPPLY("PLL", RT5659_PWR_ANLG_3, RT5659_PWR_PLL_BIT, 0,
+ NULL, 0),
SND_SOC_DAPM_SUPPLY("Mono Vref", RT5659_PWR_ANLG_1,
RT5659_PWR_VREF3_BIT, 0, NULL, 0),
@@ -2464,8 +2469,6 @@ static const struct snd_soc_dapm_widget rt5659_dapm_widgets[] = {
RT5659_ADC_MONO_R_ASRC_SFT, 0, NULL, 0),
/* Input Side */
- SND_SOC_DAPM_SUPPLY("MICBIAS1", RT5659_PWR_ANLG_2, RT5659_PWR_MB1_BIT,
- 0, NULL, 0),
SND_SOC_DAPM_SUPPLY("MICBIAS2", RT5659_PWR_ANLG_2, RT5659_PWR_MB2_BIT,
0, NULL, 0),
SND_SOC_DAPM_SUPPLY("MICBIAS3", RT5659_PWR_ANLG_2, RT5659_PWR_MB3_BIT,
@@ -3660,10 +3663,23 @@ static int rt5659_set_bias_level(struct snd_soc_component *component,
static int rt5659_probe(struct snd_soc_component *component)
{
+ struct snd_soc_dapm_context *dapm =
+ snd_soc_component_get_dapm(component);
struct rt5659_priv *rt5659 = snd_soc_component_get_drvdata(component);
rt5659->component = component;
+ switch (rt5659->pdata.jd_src) {
+ case RT5659_JD_HDA_HEADER:
+ break;
+
+ default:
+ snd_soc_dapm_new_controls(dapm,
+ rt5659_particular_dapm_widgets,
+ ARRAY_SIZE(rt5659_particular_dapm_widgets));
+ break;
+ }
+
return 0;
}
--
2.30.2
From: Christophe JAILLET <[email protected]>
[ Upstream commit 49a10c7b176295f8fafb338911cf028e97f65f4d ]
If an error occurs after a 'pci_enable_pcie_error_reporting()' call, it
must be undone by a corresponding 'pci_disable_pcie_error_reporting()'
call, as already done in the remove function.
Fixes: e87ad5539343 ("netxen: support pci error handlers")
Signed-off-by: Christophe JAILLET <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/qlogic/netxen/netxen_nic_main.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/net/ethernet/qlogic/netxen/netxen_nic_main.c b/drivers/net/ethernet/qlogic/netxen/netxen_nic_main.c
index d258e0ccf946..e2046b6d65a3 100644
--- a/drivers/net/ethernet/qlogic/netxen/netxen_nic_main.c
+++ b/drivers/net/ethernet/qlogic/netxen/netxen_nic_main.c
@@ -1602,6 +1602,8 @@ err_out_free_netdev:
free_netdev(netdev);
err_out_free_res:
+ if (NX_IS_REVISION_P3(pdev->revision))
+ pci_disable_pcie_error_reporting(pdev);
pci_release_regions(pdev);
err_out_disable_pdev:
--
2.30.2
From: Rahul Lakkireddy <[email protected]>
[ Upstream commit 09427c1915f754ebe7d3d8e54e79bbee48afe916 ]
The TID returned during successful filter creation is relative to
the region in which the filter is created. Using it directly always
returns Hi Prio/Normal filter region's entry for the first couple of
entries, even though the rule is actually inserted in Hash region.
Fix by analyzing in which region the filter has been inserted and
save the absolute TID to be used for lookup later.
Fixes: db43b30cd89c ("cxgb4: add ethtool n-tuple filter deletion")
Signed-off-by: Rahul Lakkireddy <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
.../ethernet/chelsio/cxgb4/cxgb4_ethtool.c | 24 ++++++++++++-------
1 file changed, 16 insertions(+), 8 deletions(-)
diff --git a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_ethtool.c b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_ethtool.c
index df20485b5744..83ed10ac8660 100644
--- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_ethtool.c
+++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_ethtool.c
@@ -1624,16 +1624,14 @@ static struct filter_entry *cxgb4_get_filter_entry(struct adapter *adap,
u32 ftid)
{
struct tid_info *t = &adap->tids;
- struct filter_entry *f;
- if (ftid < t->nhpftids)
- f = &adap->tids.hpftid_tab[ftid];
- else if (ftid < t->nftids)
- f = &adap->tids.ftid_tab[ftid - t->nhpftids];
- else
- f = lookup_tid(&adap->tids, ftid);
+ if (ftid >= t->hpftid_base && ftid < t->hpftid_base + t->nhpftids)
+ return &t->hpftid_tab[ftid - t->hpftid_base];
+
+ if (ftid >= t->ftid_base && ftid < t->ftid_base + t->nftids)
+ return &t->ftid_tab[ftid - t->ftid_base];
- return f;
+ return lookup_tid(t, ftid);
}
static void cxgb4_fill_filter_rule(struct ethtool_rx_flow_spec *fs,
@@ -1840,6 +1838,11 @@ static int cxgb4_ntuple_del_filter(struct net_device *dev,
filter_id = filter_info->loc_array[cmd->fs.location];
f = cxgb4_get_filter_entry(adapter, filter_id);
+ if (f->fs.prio)
+ filter_id -= adapter->tids.hpftid_base;
+ else if (!f->fs.hash)
+ filter_id -= (adapter->tids.ftid_base - adapter->tids.nhpftids);
+
ret = cxgb4_flow_rule_destroy(dev, f->fs.tc_prio, &f->fs, filter_id);
if (ret)
goto err;
@@ -1899,6 +1902,11 @@ static int cxgb4_ntuple_set_filter(struct net_device *netdev,
filter_info = &adapter->ethtool_filters->port[pi->port_id];
+ if (fs.prio)
+ tid += adapter->tids.hpftid_base;
+ else if (!fs.hash)
+ tid += (adapter->tids.ftid_base - adapter->tids.nhpftids);
+
filter_info->loc_array[cmd->fs.location] = tid;
set_bit(cmd->fs.location, filter_info->bmap);
filter_info->in_use++;
--
2.30.2
From: Rahul Lakkireddy <[email protected]>
[ Upstream commit 6d297540f75d759489054e8b07932208fc4db2cb ]
When using firmware-assisted PHY firmware image write to flash,
halt the chip before beginning the flash write operation to allow
the running firmware to store the image persistently. Otherwise,
the running firmware will only store the PHY image in local on-chip
RAM, which will be lost after next reset.
Fixes: 4ee339e1e92a ("cxgb4: add support to flash PHY image")
Signed-off-by: Rahul Lakkireddy <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
.../ethernet/chelsio/cxgb4/cxgb4_ethtool.c | 22 ++++++++++++++++---
1 file changed, 19 insertions(+), 3 deletions(-)
diff --git a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_ethtool.c b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_ethtool.c
index bc2de01d0539..df20485b5744 100644
--- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_ethtool.c
+++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_ethtool.c
@@ -1337,11 +1337,27 @@ static int cxgb4_ethtool_flash_phy(struct net_device *netdev,
return ret;
}
+ /* We have to RESET the chip/firmware because we need the
+ * chip in uninitialized state for loading new PHY image.
+ * Otherwise, the running firmware will only store the PHY
+ * image in local RAM which will be lost after next reset.
+ */
+ ret = t4_fw_reset(adap, adap->mbox, PIORSTMODE_F | PIORST_F);
+ if (ret < 0) {
+ dev_err(adap->pdev_dev,
+ "Set FW to RESET for flashing PHY FW failed. ret: %d\n",
+ ret);
+ return ret;
+ }
+
ret = t4_load_phy_fw(adap, MEMWIN_NIC, NULL, data, size);
- if (ret)
- dev_err(adap->pdev_dev, "Failed to load PHY FW\n");
+ if (ret < 0) {
+ dev_err(adap->pdev_dev, "Failed to load PHY FW. ret: %d\n",
+ ret);
+ return ret;
+ }
- return ret;
+ return 0;
}
static int cxgb4_ethtool_flash_fw(struct net_device *netdev,
--
2.30.2
From: Dmitry Osipenko <[email protected]>
[ Upstream commit 62499a94ce5b9a41047dbadaad885347b1176079 ]
One of previous changes to regulator core causes PMIC regulators to
re-probe until supply regulator is registered. Silence noisy error
message about the deferred probe.
Signed-off-by: Dmitry Osipenko <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/regulator/max77620-regulator.c | 10 ++++------
1 file changed, 4 insertions(+), 6 deletions(-)
diff --git a/drivers/regulator/max77620-regulator.c b/drivers/regulator/max77620-regulator.c
index 5c439c850d09..3cf8f085170a 100644
--- a/drivers/regulator/max77620-regulator.c
+++ b/drivers/regulator/max77620-regulator.c
@@ -846,12 +846,10 @@ static int max77620_regulator_probe(struct platform_device *pdev)
return ret;
rdev = devm_regulator_register(dev, rdesc, &config);
- if (IS_ERR(rdev)) {
- ret = PTR_ERR(rdev);
- dev_err(dev, "Regulator registration %s failed: %d\n",
- rdesc->name, ret);
- return ret;
- }
+ if (IS_ERR(rdev))
+ return dev_err_probe(dev, PTR_ERR(rdev),
+ "Regulator registration %s failed\n",
+ rdesc->name);
}
return 0;
--
2.30.2
From: David Ahern <[email protected]>
[ Upstream commit b87b04f5019e821c8c6c7761f258402e43500a1f ]
Oliver reported a use case where deleting a VRF device can hang
waiting for the refcnt to drop to 0. The root cause is that the dst
is allocated against the VRF device but cached on the loopback
device.
The use case (added to the selftests) has an implicit VRF crossing
due to the ordering of the FIB rules (lookup local is before the
l3mdev rule, but the problem occurs even if the FIB rules are
re-ordered with local after l3mdev because the VRF table does not
have a default route to terminate the lookup). The end result is
is that the FIB lookup returns the loopback device as the nexthop,
but the ingress device is in a VRF. The mismatch causes the dst
alloc against the VRF device but then cached on the loopback.
The fix is to bring the trick used for IPv6 (see ip6_rt_get_dev_rcu):
pick the dst alloc device based the fib lookup result but with checks
that the result has a nexthop device (e.g., not an unreachable or
prohibit entry).
Fixes: f5a0aab84b74 ("net: ipv4: dst for local input routes should use l3mdev if relevant")
Reported-by: Oliver Herms <[email protected]>
Signed-off-by: David Ahern <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/ipv4/route.c | 15 +++++++++++++-
tools/testing/selftests/net/fib_tests.sh | 25 ++++++++++++++++++++++++
2 files changed, 39 insertions(+), 1 deletion(-)
diff --git a/net/ipv4/route.c b/net/ipv4/route.c
index 798dc85bde5b..e968bb47d5bd 100644
--- a/net/ipv4/route.c
+++ b/net/ipv4/route.c
@@ -2076,6 +2076,19 @@ martian_source:
return err;
}
+/* get device for dst_alloc with local routes */
+static struct net_device *ip_rt_get_dev(struct net *net,
+ const struct fib_result *res)
+{
+ struct fib_nh_common *nhc = res->fi ? res->nhc : NULL;
+ struct net_device *dev = NULL;
+
+ if (nhc)
+ dev = l3mdev_master_dev_rcu(nhc->nhc_dev);
+
+ return dev ? : net->loopback_dev;
+}
+
/*
* NOTE. We drop all the packets that has local source
* addresses, because every properly looped back packet
@@ -2232,7 +2245,7 @@ local_input:
}
}
- rth = rt_dst_alloc(l3mdev_master_dev_rcu(dev) ? : net->loopback_dev,
+ rth = rt_dst_alloc(ip_rt_get_dev(net, res),
flags | RTCF_LOCAL, res->type,
IN_DEV_CONF_GET(in_dev, NOPOLICY), false);
if (!rth)
diff --git a/tools/testing/selftests/net/fib_tests.sh b/tools/testing/selftests/net/fib_tests.sh
index 2b5707738609..6fad54c7ecb4 100755
--- a/tools/testing/selftests/net/fib_tests.sh
+++ b/tools/testing/selftests/net/fib_tests.sh
@@ -1384,12 +1384,37 @@ ipv4_rt_replace()
ipv4_rt_replace_mpath
}
+# checks that cached input route on VRF port is deleted
+# when VRF is deleted
+ipv4_local_rt_cache()
+{
+ run_cmd "ip addr add 10.0.0.1/32 dev lo"
+ run_cmd "ip netns add test-ns"
+ run_cmd "ip link add veth-outside type veth peer name veth-inside"
+ run_cmd "ip link add vrf-100 type vrf table 1100"
+ run_cmd "ip link set veth-outside master vrf-100"
+ run_cmd "ip link set veth-inside netns test-ns"
+ run_cmd "ip link set veth-outside up"
+ run_cmd "ip link set vrf-100 up"
+ run_cmd "ip route add 10.1.1.1/32 dev veth-outside table 1100"
+ run_cmd "ip netns exec test-ns ip link set veth-inside up"
+ run_cmd "ip netns exec test-ns ip addr add 10.1.1.1/32 dev veth-inside"
+ run_cmd "ip netns exec test-ns ip route add 10.0.0.1/32 dev veth-inside"
+ run_cmd "ip netns exec test-ns ip route add default via 10.0.0.1"
+ run_cmd "ip netns exec test-ns ping 10.0.0.1 -c 1 -i 1"
+ run_cmd "ip link delete vrf-100"
+
+ # if we do not hang test is a success
+ log_test $? 0 "Cached route removed from VRF port device"
+}
+
ipv4_route_test()
{
route_setup
ipv4_rt_add
ipv4_rt_replace
+ ipv4_local_rt_cache
route_cleanup
}
--
2.30.2
From: Nicolas Cavallari <[email protected]>
[ Upstream commit a8437f05384cb472518ec21bf4fffbe8f0a47378 ]
Otherwise, when compiled as module, a WARN_ON is triggered:
WARNING: CPU: 0 PID: 5 at sound/core/init.c:208 snd_card_new+0x310/0x39c [snd]
[...]
CPU: 0 PID: 5 Comm: kworker/0:0 Not tainted 5.10.39 #1
Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree)
Workqueue: events deferred_probe_work_func
[<c0111988>] (unwind_backtrace) from [<c010c8ac>] (show_stack+0x10/0x14)
[<c010c8ac>] (show_stack) from [<c092784c>] (dump_stack+0xdc/0x104)
[<c092784c>] (dump_stack) from [<c0129710>] (__warn+0xd8/0x114)
[<c0129710>] (__warn) from [<c0922a48>] (warn_slowpath_fmt+0x5c/0xc4)
[<c0922a48>] (warn_slowpath_fmt) from [<bf0496f8>] (snd_card_new+0x310/0x39c [snd])
[<bf0496f8>] (snd_card_new [snd]) from [<bf1d7df8>] (snd_soc_bind_card+0x334/0x9c4 [snd_soc_core])
[<bf1d7df8>] (snd_soc_bind_card [snd_soc_core]) from [<bf1e9cd8>] (devm_snd_soc_register_card+0x30/0x6c [snd_soc_core])
[<bf1e9cd8>] (devm_snd_soc_register_card [snd_soc_core]) from [<bf22d964>] (fsl_asoc_card_probe+0x550/0xcc8 [snd_soc_fsl_asoc_card])
[<bf22d964>] (fsl_asoc_card_probe [snd_soc_fsl_asoc_card]) from [<c060c930>] (platform_drv_probe+0x48/0x98)
[...]
Signed-off-by: Nicolas Cavallari <[email protected]>
Acked-by: Shengjiu Wang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/soc/fsl/fsl-asoc-card.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/sound/soc/fsl/fsl-asoc-card.c b/sound/soc/fsl/fsl-asoc-card.c
index a2dd3b6b7fec..7cd14d6b9436 100644
--- a/sound/soc/fsl/fsl-asoc-card.c
+++ b/sound/soc/fsl/fsl-asoc-card.c
@@ -720,6 +720,7 @@ static int fsl_asoc_card_probe(struct platform_device *pdev)
/* Initialize sound card */
priv->pdev = pdev;
priv->card.dev = &pdev->dev;
+ priv->card.owner = THIS_MODULE;
ret = snd_soc_of_parse_card_name(&priv->card, "model");
if (ret) {
snprintf(priv->name, sizeof(priv->name), "%s-audio",
--
2.30.2
From: Pavel Skripkin <[email protected]>
[ Upstream commit 9cca0c2d70149160407bda9a9446ce0c29b6e6c6 ]
static void ec_bhf_remove(struct pci_dev *dev)
{
...
struct ec_bhf_priv *priv = netdev_priv(net_dev);
unregister_netdev(net_dev);
free_netdev(net_dev);
pci_iounmap(dev, priv->dma_io);
pci_iounmap(dev, priv->io);
...
}
priv is netdev private data, but it is used
after free_netdev(). It can cause use-after-free when accessing priv
pointer. So, fix it by moving free_netdev() after pci_iounmap()
calls.
Fixes: 6af55ff52b02 ("Driver for Beckhoff CX5020 EtherCAT master module.")
Signed-off-by: Pavel Skripkin <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/ec_bhf.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/ec_bhf.c b/drivers/net/ethernet/ec_bhf.c
index 46b0dbab8aad..7c992172933b 100644
--- a/drivers/net/ethernet/ec_bhf.c
+++ b/drivers/net/ethernet/ec_bhf.c
@@ -576,10 +576,12 @@ static void ec_bhf_remove(struct pci_dev *dev)
struct ec_bhf_priv *priv = netdev_priv(net_dev);
unregister_netdev(net_dev);
- free_netdev(net_dev);
pci_iounmap(dev, priv->dma_io);
pci_iounmap(dev, priv->io);
+
+ free_netdev(net_dev);
+
pci_release_regions(dev);
pci_clear_master(dev);
pci_disable_device(dev);
--
2.30.2
From: yangerkun <[email protected]>
[ Upstream commit e8675d291ac007e1c636870db880f837a9ea112a ]
Our syzkaller trigger the "BUG_ON(!list_empty(&inode->i_wb_list))" in
clear_inode:
kernel BUG at fs/inode.c:519!
Internal error: Oops - BUG: 0 [#1] SMP
Modules linked in:
Process syz-executor.0 (pid: 249, stack limit = 0x00000000a12409d7)
CPU: 1 PID: 249 Comm: syz-executor.0 Not tainted 4.19.95
Hardware name: linux,dummy-virt (DT)
pstate: 80000005 (Nzcv daif -PAN -UAO)
pc : clear_inode+0x280/0x2a8
lr : clear_inode+0x280/0x2a8
Call trace:
clear_inode+0x280/0x2a8
ext4_clear_inode+0x38/0xe8
ext4_free_inode+0x130/0xc68
ext4_evict_inode+0xb20/0xcb8
evict+0x1a8/0x3c0
iput+0x344/0x460
do_unlinkat+0x260/0x410
__arm64_sys_unlinkat+0x6c/0xc0
el0_svc_common+0xdc/0x3b0
el0_svc_handler+0xf8/0x160
el0_svc+0x10/0x218
Kernel panic - not syncing: Fatal exception
A crash dump of this problem show that someone called __munlock_pagevec
to clear page LRU without lock_page: do_mmap -> mmap_region -> do_munmap
-> munlock_vma_pages_range -> __munlock_pagevec.
As a result memory_failure will call identify_page_state without
wait_on_page_writeback. And after truncate_error_page clear the mapping
of this page. end_page_writeback won't call sb_clear_inode_writeback to
clear inode->i_wb_list. That will trigger BUG_ON in clear_inode!
Fix it by checking PageWriteback too to help determine should we skip
wait_on_page_writeback.
Link: https://lkml.kernel.org/r/[email protected]
Fixes: 0bc1f8b0682c ("hwpoison: fix the handling path of the victimized page frame that belong to non-LRU")
Signed-off-by: yangerkun <[email protected]>
Acked-by: Naoya Horiguchi <[email protected]>
Cc: Jan Kara <[email protected]>
Cc: Theodore Ts'o <[email protected]>
Cc: Oscar Salvador <[email protected]>
Cc: Yu Kuai <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
mm/memory-failure.c | 7 ++++++-
1 file changed, 6 insertions(+), 1 deletion(-)
diff --git a/mm/memory-failure.c b/mm/memory-failure.c
index 2d7a667f8e60..25fb82320e3d 100644
--- a/mm/memory-failure.c
+++ b/mm/memory-failure.c
@@ -1445,7 +1445,12 @@ int memory_failure(unsigned long pfn, int flags)
return 0;
}
- if (!PageTransTail(p) && !PageLRU(p))
+ /*
+ * __munlock_pagevec may clear a writeback page's LRU flag without
+ * page_lock. We need wait writeback completion for this page or it
+ * may trigger vfs BUG while evict inode.
+ */
+ if (!PageTransTail(p) && !PageLRU(p) && !PageWriteback(p))
goto identify_page_state;
/*
--
2.30.2
From: Jakub Kicinski <[email protected]>
[ Upstream commit e175aef902697826d344ce3a12189329848fe898 ]
Outer nest for ETHTOOL_A_STRSET_STRINGSETS is not accounted for.
This may result in ETHTOOL_MSG_STRSET_GET producing a warning like:
calculated message payload length (684) not sufficient
WARNING: CPU: 0 PID: 30967 at net/ethtool/netlink.c:369 ethnl_default_doit+0x87a/0xa20
and a splat.
As usually with such warnings three conditions must be met for the warning
to trigger:
- there must be no skb size rounding up (e.g. reply_size of 684);
- string set must be per-device (so that the header gets populated);
- the device name must be at least 12 characters long.
all in all with current user space it looks like reading priv flags
is the only place this could potentially happen. Or with syzbot :)
Reported-by: [email protected]
Fixes: 71921690f974 ("ethtool: provide string sets with STRSET_GET request")
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/ethtool/strset.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/net/ethtool/strset.c b/net/ethtool/strset.c
index c3a5489964cd..9908b922cce8 100644
--- a/net/ethtool/strset.c
+++ b/net/ethtool/strset.c
@@ -328,6 +328,8 @@ static int strset_reply_size(const struct ethnl_req_info *req_base,
int len = 0;
int ret;
+ len += nla_total_size(0); /* ETHTOOL_A_STRSET_STRINGSETS */
+
for (i = 0; i < ETH_SS_COUNT; i++) {
const struct strset_info *set_info = &data->sets[i];
--
2.30.2
From: Alex Elder <[email protected]>
[ Upstream commit 994c393bb6886d6d94d628475b274a8cb3fc67a4 ]
The purpose of the loop using u64_stats_fetch_*_irq() is to ensure
statistics on a given CPU are collected atomically. If one of the
statistics values gets updated within the begin/retry window, the
loop will run again.
Currently the statistics totals are updated inside that window.
This means that if the loop ever retries, the statistics for the
CPU will be counted more than once.
Fix this by taking a snapshot of a CPU's statistics inside the
protected window, and then updating the counters with the snapshot
values after exiting the loop.
(Also add a newline at the end of this file...)
Fixes: 192c4b5d48f2a ("net: qualcomm: rmnet: Add support for 64 bit stats")
Signed-off-by: Alex Elder <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
.../net/ethernet/qualcomm/rmnet/rmnet_vnd.c | 18 +++++++++---------
1 file changed, 9 insertions(+), 9 deletions(-)
diff --git a/drivers/net/ethernet/qualcomm/rmnet/rmnet_vnd.c b/drivers/net/ethernet/qualcomm/rmnet/rmnet_vnd.c
index 6cf46f893fb9..2adcf24848a4 100644
--- a/drivers/net/ethernet/qualcomm/rmnet/rmnet_vnd.c
+++ b/drivers/net/ethernet/qualcomm/rmnet/rmnet_vnd.c
@@ -125,24 +125,24 @@ static void rmnet_get_stats64(struct net_device *dev,
struct rtnl_link_stats64 *s)
{
struct rmnet_priv *priv = netdev_priv(dev);
- struct rmnet_vnd_stats total_stats;
+ struct rmnet_vnd_stats total_stats = { };
struct rmnet_pcpu_stats *pcpu_ptr;
+ struct rmnet_vnd_stats snapshot;
unsigned int cpu, start;
- memset(&total_stats, 0, sizeof(struct rmnet_vnd_stats));
-
for_each_possible_cpu(cpu) {
pcpu_ptr = per_cpu_ptr(priv->pcpu_stats, cpu);
do {
start = u64_stats_fetch_begin_irq(&pcpu_ptr->syncp);
- total_stats.rx_pkts += pcpu_ptr->stats.rx_pkts;
- total_stats.rx_bytes += pcpu_ptr->stats.rx_bytes;
- total_stats.tx_pkts += pcpu_ptr->stats.tx_pkts;
- total_stats.tx_bytes += pcpu_ptr->stats.tx_bytes;
+ snapshot = pcpu_ptr->stats; /* struct assignment */
} while (u64_stats_fetch_retry_irq(&pcpu_ptr->syncp, start));
- total_stats.tx_drops += pcpu_ptr->stats.tx_drops;
+ total_stats.rx_pkts += snapshot.rx_pkts;
+ total_stats.rx_bytes += snapshot.rx_bytes;
+ total_stats.tx_pkts += snapshot.tx_pkts;
+ total_stats.tx_bytes += snapshot.tx_bytes;
+ total_stats.tx_drops += snapshot.tx_drops;
}
s->rx_packets = total_stats.rx_pkts;
@@ -353,4 +353,4 @@ int rmnet_vnd_update_dev_mtu(struct rmnet_port *port,
}
return 0;
-}
\ No newline at end of file
+}
--
2.30.2
From: Christophe JAILLET <[email protected]>
[ Upstream commit cb3376604a676e0302258b01893911bdd7aa5278 ]
If an error occurs after a 'pci_enable_pcie_error_reporting()' call, it
must be undone by a corresponding 'pci_disable_pcie_error_reporting()'
call, as already done in the remove function.
Fixes: 451724c821c1 ("qlcnic: aer support")
Signed-off-by: Christophe JAILLET <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c
index c2faf96fcade..27c07b2412f4 100644
--- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c
+++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c
@@ -2692,6 +2692,7 @@ err_out_free_hw_res:
kfree(ahw);
err_out_free_res:
+ pci_disable_pcie_error_reporting(pdev);
pci_release_regions(pdev);
err_out_disable_pdev:
--
2.30.2
From: Saravana Kannan <[email protected]>
[ Upstream commit 9bf3797796f570b34438235a6a537df85832bdad ]
On sunxi boards that use HDMI output, HDMI device probe keeps being
avoided indefinitely with these repeated messages in dmesg:
platform 1ee0000.hdmi: probe deferral - supplier 1ef0000.hdmi-phy
not ready
There's a fwnode_link being created with fw_devlink=on between hdmi
and hdmi-phy nodes, because both nodes have 'compatible' property set.
Fw_devlink code assumes that nodes that have compatible property
set will also have a device associated with them by some driver
eventually. This is not the case with the current sun8i-hdmi
driver.
This commit makes sun8i-hdmi-phy into a proper platform device
and fixes the display pipeline probe on sunxi boards that use HDMI.
More context: https://lkml.org/lkml/2021/5/16/203
Signed-off-by: Saravana Kannan <[email protected]>
Signed-off-by: Ondrej Jirman <[email protected]>
Tested-by: Andre Przywara <[email protected]>
Signed-off-by: Maxime Ripard <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/sun4i/sun8i_dw_hdmi.c | 31 ++++++++++++++++---
drivers/gpu/drm/sun4i/sun8i_dw_hdmi.h | 5 ++--
drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c | 41 ++++++++++++++++++++++----
3 files changed, 66 insertions(+), 11 deletions(-)
diff --git a/drivers/gpu/drm/sun4i/sun8i_dw_hdmi.c b/drivers/gpu/drm/sun4i/sun8i_dw_hdmi.c
index bbdfd5e26ec8..f75fb157f2ff 100644
--- a/drivers/gpu/drm/sun4i/sun8i_dw_hdmi.c
+++ b/drivers/gpu/drm/sun4i/sun8i_dw_hdmi.c
@@ -209,7 +209,7 @@ static int sun8i_dw_hdmi_bind(struct device *dev, struct device *master,
goto err_disable_clk_tmds;
}
- ret = sun8i_hdmi_phy_probe(hdmi, phy_node);
+ ret = sun8i_hdmi_phy_get(hdmi, phy_node);
of_node_put(phy_node);
if (ret) {
dev_err(dev, "Couldn't get the HDMI PHY\n");
@@ -242,7 +242,6 @@ static int sun8i_dw_hdmi_bind(struct device *dev, struct device *master,
cleanup_encoder:
drm_encoder_cleanup(encoder);
- sun8i_hdmi_phy_remove(hdmi);
err_disable_clk_tmds:
clk_disable_unprepare(hdmi->clk_tmds);
err_assert_ctrl_reset:
@@ -263,7 +262,6 @@ static void sun8i_dw_hdmi_unbind(struct device *dev, struct device *master,
struct sun8i_dw_hdmi *hdmi = dev_get_drvdata(dev);
dw_hdmi_unbind(hdmi->hdmi);
- sun8i_hdmi_phy_remove(hdmi);
clk_disable_unprepare(hdmi->clk_tmds);
reset_control_assert(hdmi->rst_ctrl);
gpiod_set_value(hdmi->ddc_en, 0);
@@ -320,7 +318,32 @@ static struct platform_driver sun8i_dw_hdmi_pltfm_driver = {
.of_match_table = sun8i_dw_hdmi_dt_ids,
},
};
-module_platform_driver(sun8i_dw_hdmi_pltfm_driver);
+
+static int __init sun8i_dw_hdmi_init(void)
+{
+ int ret;
+
+ ret = platform_driver_register(&sun8i_dw_hdmi_pltfm_driver);
+ if (ret)
+ return ret;
+
+ ret = platform_driver_register(&sun8i_hdmi_phy_driver);
+ if (ret) {
+ platform_driver_unregister(&sun8i_dw_hdmi_pltfm_driver);
+ return ret;
+ }
+
+ return ret;
+}
+
+static void __exit sun8i_dw_hdmi_exit(void)
+{
+ platform_driver_unregister(&sun8i_dw_hdmi_pltfm_driver);
+ platform_driver_unregister(&sun8i_hdmi_phy_driver);
+}
+
+module_init(sun8i_dw_hdmi_init);
+module_exit(sun8i_dw_hdmi_exit);
MODULE_AUTHOR("Jernej Skrabec <[email protected]>");
MODULE_DESCRIPTION("Allwinner DW HDMI bridge");
diff --git a/drivers/gpu/drm/sun4i/sun8i_dw_hdmi.h b/drivers/gpu/drm/sun4i/sun8i_dw_hdmi.h
index d4b55af0592f..74f6ed0e2570 100644
--- a/drivers/gpu/drm/sun4i/sun8i_dw_hdmi.h
+++ b/drivers/gpu/drm/sun4i/sun8i_dw_hdmi.h
@@ -195,14 +195,15 @@ struct sun8i_dw_hdmi {
struct gpio_desc *ddc_en;
};
+extern struct platform_driver sun8i_hdmi_phy_driver;
+
static inline struct sun8i_dw_hdmi *
encoder_to_sun8i_dw_hdmi(struct drm_encoder *encoder)
{
return container_of(encoder, struct sun8i_dw_hdmi, encoder);
}
-int sun8i_hdmi_phy_probe(struct sun8i_dw_hdmi *hdmi, struct device_node *node);
-void sun8i_hdmi_phy_remove(struct sun8i_dw_hdmi *hdmi);
+int sun8i_hdmi_phy_get(struct sun8i_dw_hdmi *hdmi, struct device_node *node);
void sun8i_hdmi_phy_init(struct sun8i_hdmi_phy *phy);
void sun8i_hdmi_phy_set_ops(struct sun8i_hdmi_phy *phy,
diff --git a/drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c b/drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c
index 9994edf67509..c9239708d398 100644
--- a/drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c
+++ b/drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c
@@ -5,6 +5,7 @@
#include <linux/delay.h>
#include <linux/of_address.h>
+#include <linux/of_platform.h>
#include "sun8i_dw_hdmi.h"
@@ -597,10 +598,30 @@ static const struct of_device_id sun8i_hdmi_phy_of_table[] = {
{ /* sentinel */ }
};
-int sun8i_hdmi_phy_probe(struct sun8i_dw_hdmi *hdmi, struct device_node *node)
+int sun8i_hdmi_phy_get(struct sun8i_dw_hdmi *hdmi, struct device_node *node)
+{
+ struct platform_device *pdev = of_find_device_by_node(node);
+ struct sun8i_hdmi_phy *phy;
+
+ if (!pdev)
+ return -EPROBE_DEFER;
+
+ phy = platform_get_drvdata(pdev);
+ if (!phy)
+ return -EPROBE_DEFER;
+
+ hdmi->phy = phy;
+
+ put_device(&pdev->dev);
+
+ return 0;
+}
+
+static int sun8i_hdmi_phy_probe(struct platform_device *pdev)
{
const struct of_device_id *match;
- struct device *dev = hdmi->dev;
+ struct device *dev = &pdev->dev;
+ struct device_node *node = dev->of_node;
struct sun8i_hdmi_phy *phy;
struct resource res;
void __iomem *regs;
@@ -704,7 +725,7 @@ int sun8i_hdmi_phy_probe(struct sun8i_dw_hdmi *hdmi, struct device_node *node)
clk_prepare_enable(phy->clk_phy);
}
- hdmi->phy = phy;
+ platform_set_drvdata(pdev, phy);
return 0;
@@ -728,9 +749,9 @@ err_put_clk_bus:
return ret;
}
-void sun8i_hdmi_phy_remove(struct sun8i_dw_hdmi *hdmi)
+static int sun8i_hdmi_phy_remove(struct platform_device *pdev)
{
- struct sun8i_hdmi_phy *phy = hdmi->phy;
+ struct sun8i_hdmi_phy *phy = platform_get_drvdata(pdev);
clk_disable_unprepare(phy->clk_mod);
clk_disable_unprepare(phy->clk_bus);
@@ -744,4 +765,14 @@ void sun8i_hdmi_phy_remove(struct sun8i_dw_hdmi *hdmi)
clk_put(phy->clk_pll1);
clk_put(phy->clk_mod);
clk_put(phy->clk_bus);
+ return 0;
}
+
+struct platform_driver sun8i_hdmi_phy_driver = {
+ .probe = sun8i_hdmi_phy_probe,
+ .remove = sun8i_hdmi_phy_remove,
+ .driver = {
+ .name = "sun8i-hdmi-phy",
+ .of_match_table = sun8i_hdmi_phy_of_table,
+ },
+};
--
2.30.2
From: Odin Ugedal <[email protected]>
[ Upstream commit a7b359fc6a37faaf472125867c8dc5a068c90982 ]
Fix an issue where fairness is decreased since cfs_rq's can end up not
being decayed properly. For two sibling control groups with the same
priority, this can often lead to a load ratio of 99/1 (!!).
This happens because when a cfs_rq is throttled, all the descendant
cfs_rq's will be removed from the leaf list. When they initial cfs_rq
is unthrottled, it will currently only re add descendant cfs_rq's if
they have one or more entities enqueued. This is not a perfect
heuristic.
Instead, we insert all cfs_rq's that contain one or more enqueued
entities, or it its load is not completely decayed.
Can often lead to situations like this for equally weighted control
groups:
$ ps u -C stress
USER PID %CPU %MEM VSZ RSS TTY STAT START TIME COMMAND
root 10009 88.8 0.0 3676 100 pts/1 R+ 11:04 0:13 stress --cpu 1
root 10023 3.0 0.0 3676 104 pts/1 R+ 11:04 0:00 stress --cpu 1
Fixes: 31bc6aeaab1d ("sched/fair: Optimize update_blocked_averages()")
[vingo: !SMP build fix]
Signed-off-by: Odin Ugedal <[email protected]>
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Reviewed-by: Vincent Guittot <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
kernel/sched/fair.c | 44 +++++++++++++++++++++++++-------------------
1 file changed, 25 insertions(+), 19 deletions(-)
diff --git a/kernel/sched/fair.c b/kernel/sched/fair.c
index d6e1c90de570..1cbb7f80db31 100644
--- a/kernel/sched/fair.c
+++ b/kernel/sched/fair.c
@@ -3300,6 +3300,24 @@ static inline void cfs_rq_util_change(struct cfs_rq *cfs_rq, int flags)
#ifdef CONFIG_SMP
#ifdef CONFIG_FAIR_GROUP_SCHED
+
+static inline bool cfs_rq_is_decayed(struct cfs_rq *cfs_rq)
+{
+ if (cfs_rq->load.weight)
+ return false;
+
+ if (cfs_rq->avg.load_sum)
+ return false;
+
+ if (cfs_rq->avg.util_sum)
+ return false;
+
+ if (cfs_rq->avg.runnable_sum)
+ return false;
+
+ return true;
+}
+
/**
* update_tg_load_avg - update the tg's load avg
* @cfs_rq: the cfs_rq whose avg changed
@@ -4093,6 +4111,11 @@ static inline void update_misfit_status(struct task_struct *p, struct rq *rq)
#else /* CONFIG_SMP */
+static inline bool cfs_rq_is_decayed(struct cfs_rq *cfs_rq)
+{
+ return true;
+}
+
#define UPDATE_TG 0x0
#define SKIP_AGE_LOAD 0x0
#define DO_ATTACH 0x0
@@ -4751,8 +4774,8 @@ static int tg_unthrottle_up(struct task_group *tg, void *data)
cfs_rq->throttled_clock_task_time += rq_clock_task(rq) -
cfs_rq->throttled_clock_task;
- /* Add cfs_rq with already running entity in the list */
- if (cfs_rq->nr_running >= 1)
+ /* Add cfs_rq with load or one or more already running entities to the list */
+ if (!cfs_rq_is_decayed(cfs_rq) || cfs_rq->nr_running)
list_add_leaf_cfs_rq(cfs_rq);
}
@@ -7927,23 +7950,6 @@ static bool __update_blocked_others(struct rq *rq, bool *done)
#ifdef CONFIG_FAIR_GROUP_SCHED
-static inline bool cfs_rq_is_decayed(struct cfs_rq *cfs_rq)
-{
- if (cfs_rq->load.weight)
- return false;
-
- if (cfs_rq->avg.load_sum)
- return false;
-
- if (cfs_rq->avg.util_sum)
- return false;
-
- if (cfs_rq->avg.runnable_sum)
- return false;
-
- return true;
-}
-
static bool __update_blocked_fair(struct rq *rq, bool *done)
{
struct cfs_rq *cfs_rq, *pos;
--
2.30.2
From: Daniel Borkmann <[email protected]>
[ Upstream commit fe9a5ca7e370e613a9a75a13008a3845ea759d6e ]
... in such circumstances, we do not want to mark the instruction as seen given
the goal is still to jmp-1 rewrite/sanitize dead code, if it is not reachable
from the non-speculative path verification. We do however want to verify it for
safety regardless.
With the patch as-is all the insns that have been marked as seen before the
patch will also be marked as seen after the patch (just with a potentially
different non-zero count). An upcoming patch will also verify paths that are
unreachable in the non-speculative domain, hence this extension is needed.
Signed-off-by: Daniel Borkmann <[email protected]>
Reviewed-by: John Fastabend <[email protected]>
Reviewed-by: Benedict Schlueter <[email protected]>
Reviewed-by: Piotr Krysiuk <[email protected]>
Acked-by: Alexei Starovoitov <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
kernel/bpf/verifier.c | 20 ++++++++++++++++++--
1 file changed, 18 insertions(+), 2 deletions(-)
diff --git a/kernel/bpf/verifier.c b/kernel/bpf/verifier.c
index 71ac1da127a6..e97724e36dfb 100644
--- a/kernel/bpf/verifier.c
+++ b/kernel/bpf/verifier.c
@@ -5851,6 +5851,19 @@ do_sim:
return !ret ? REASON_STACK : 0;
}
+static void sanitize_mark_insn_seen(struct bpf_verifier_env *env)
+{
+ struct bpf_verifier_state *vstate = env->cur_state;
+
+ /* If we simulate paths under speculation, we don't update the
+ * insn as 'seen' such that when we verify unreachable paths in
+ * the non-speculative domain, sanitize_dead_code() can still
+ * rewrite/sanitize them.
+ */
+ if (!vstate->speculative)
+ env->insn_aux_data[env->insn_idx].seen = env->pass_cnt;
+}
+
static int sanitize_err(struct bpf_verifier_env *env,
const struct bpf_insn *insn, int reason,
const struct bpf_reg_state *off_reg,
@@ -9847,7 +9860,7 @@ static int do_check(struct bpf_verifier_env *env)
}
regs = cur_regs(env);
- env->insn_aux_data[env->insn_idx].seen = env->pass_cnt;
+ sanitize_mark_insn_seen(env);
prev_insn_idx = env->insn_idx;
if (class == BPF_ALU || class == BPF_ALU64) {
@@ -10067,7 +10080,7 @@ process_bpf_exit:
return err;
env->insn_idx++;
- env->insn_aux_data[env->insn_idx].seen = env->pass_cnt;
+ sanitize_mark_insn_seen(env);
} else {
verbose(env, "invalid BPF_LD mode\n");
return -EINVAL;
@@ -11741,6 +11754,9 @@ static void free_states(struct bpf_verifier_env *env)
* insn_aux_data was touched. These variables are compared to clear temporary
* data from failed pass. For testing and experiments do_check_common() can be
* run multiple times even when prior attempt to verify is unsuccessful.
+ *
+ * Note that special handling is needed on !env->bypass_spec_v1 if this is
+ * ever called outside of error path with subsequent program rejection.
*/
static void sanitize_insn_aux_data(struct bpf_verifier_env *env)
{
--
2.30.2
From: Daniel Borkmann <[email protected]>
[ Upstream commit d203b0fd863a2261e5d00b97f3d060c4c2a6db71 ]
Instead of relying on current env->pass_cnt, use the seen count from the
old aux data in adjust_insn_aux_data(), and expand it to the new range of
patched instructions. This change is valid given we always expand 1:n
with n>=1, so what applies to the old/original instruction needs to apply
for the replacement as well.
Not relying on env->pass_cnt is a prerequisite for a later change where we
want to avoid marking an instruction seen when verified under speculative
execution path.
Signed-off-by: Daniel Borkmann <[email protected]>
Reviewed-by: John Fastabend <[email protected]>
Reviewed-by: Benedict Schlueter <[email protected]>
Reviewed-by: Piotr Krysiuk <[email protected]>
Acked-by: Alexei Starovoitov <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
kernel/bpf/verifier.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/kernel/bpf/verifier.c b/kernel/bpf/verifier.c
index da8fc57ff5b2..71ac1da127a6 100644
--- a/kernel/bpf/verifier.c
+++ b/kernel/bpf/verifier.c
@@ -10475,6 +10475,7 @@ static int adjust_insn_aux_data(struct bpf_verifier_env *env,
{
struct bpf_insn_aux_data *new_data, *old_data = env->insn_aux_data;
struct bpf_insn *insn = new_prog->insnsi;
+ u32 old_seen = old_data[off].seen;
u32 prog_len;
int i;
@@ -10495,7 +10496,8 @@ static int adjust_insn_aux_data(struct bpf_verifier_env *env,
memcpy(new_data + off + cnt - 1, old_data + off,
sizeof(struct bpf_insn_aux_data) * (prog_len - off - cnt + 1));
for (i = off; i < off + cnt - 1; i++) {
- new_data[i].seen = env->pass_cnt;
+ /* Expand insni[off]'s seen count to the patched range. */
+ new_data[i].seen = old_seen;
new_data[i].zext_dst = insn_has_def32(env, insn + i);
}
env->insn_aux_data = new_data;
--
2.30.2
From: ChiYuan Huang <[email protected]>
[ Upstream commit 46639a5e684edd0b80ae9dff220f193feb356277 ]
- Fix to make regcache value first reading back from HW.
Signed-off-by: ChiYuan Huang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/regulator/rtmv20-regulator.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/regulator/rtmv20-regulator.c b/drivers/regulator/rtmv20-regulator.c
index 5adc552dffd5..4bca64de0f67 100644
--- a/drivers/regulator/rtmv20-regulator.c
+++ b/drivers/regulator/rtmv20-regulator.c
@@ -27,6 +27,7 @@
#define RTMV20_REG_LDIRQ 0x30
#define RTMV20_REG_LDSTAT 0x40
#define RTMV20_REG_LDMASK 0x50
+#define RTMV20_MAX_REGS (RTMV20_REG_LDMASK + 1)
#define RTMV20_VID_MASK GENMASK(7, 4)
#define RICHTEK_VID 0x80
@@ -313,6 +314,7 @@ static const struct regmap_config rtmv20_regmap_config = {
.val_bits = 8,
.cache_type = REGCACHE_RBTREE,
.max_register = RTMV20_REG_LDMASK,
+ .num_reg_defaults_raw = RTMV20_MAX_REGS,
.writeable_reg = rtmv20_is_accessible_reg,
.readable_reg = rtmv20_is_accessible_reg,
--
2.30.2
From: Chen Li <[email protected]>
[ Upstream commit ab8363d3875a83f4901eb1cc00ce8afd24de6c85 ]
I met a gpu addr bug recently and the kernel log
tells me the pc is memcpy/memset and link register is
radeon_uvd_resume.
As we know, in some architectures, optimized memcpy/memset
may not work well on device memory. Trival memcpy_toio/memset_io
can fix this problem.
BTW, amdgpu has already done it in:
commit ba0b2275a678 ("drm/amdgpu: use memcpy_to/fromio for UVD fw upload"),
that's why it has no this issue on the same gpu and platform.
Signed-off-by: Chen Li <[email protected]>
Reviewed-by: Christian König <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/radeon/radeon_uvd.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/drm/radeon/radeon_uvd.c b/drivers/gpu/drm/radeon/radeon_uvd.c
index 57fb3eb3a4b4..1f4e3396d097 100644
--- a/drivers/gpu/drm/radeon/radeon_uvd.c
+++ b/drivers/gpu/drm/radeon/radeon_uvd.c
@@ -286,7 +286,7 @@ int radeon_uvd_resume(struct radeon_device *rdev)
if (rdev->uvd.vcpu_bo == NULL)
return -EINVAL;
- memcpy(rdev->uvd.cpu_addr, rdev->uvd_fw->data, rdev->uvd_fw->size);
+ memcpy_toio((void __iomem *)rdev->uvd.cpu_addr, rdev->uvd_fw->data, rdev->uvd_fw->size);
size = radeon_bo_size(rdev->uvd.vcpu_bo);
size -= rdev->uvd_fw->size;
@@ -294,7 +294,7 @@ int radeon_uvd_resume(struct radeon_device *rdev)
ptr = rdev->uvd.cpu_addr;
ptr += rdev->uvd_fw->size;
- memset(ptr, 0, size);
+ memset_io((void __iomem *)ptr, 0, size);
return 0;
}
--
2.30.2
From: Andrew Lunn <[email protected]>
commit a7d8d1c7a7f73e780aa9ae74926ae5985b2f895f upstream.
The Cypress CY7C65632 appears to have an issue with auto suspend and
detecting devices, not too dissimilar to the SMSC 5534B hub. It is
easiest to reproduce by connecting multiple mass storage devices to
the hub at the same time. On a Lenovo Yoga, around 1 in 3 attempts
result in the devices not being detected. It is however possible to
make them appear using lsusb -v.
Disabling autosuspend for this hub resolves the issue.
Fixes: 1208f9e1d758 ("USB: hub: Fix the broken detection of USB3 device in SMSC hub")
Cc: [email protected]
Signed-off-by: Andrew Lunn <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/core/hub.c | 7 +++++++
1 file changed, 7 insertions(+)
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -40,6 +40,8 @@
#define USB_VENDOR_GENESYS_LOGIC 0x05e3
#define USB_VENDOR_SMSC 0x0424
#define USB_PRODUCT_USB5534B 0x5534
+#define USB_VENDOR_CYPRESS 0x04b4
+#define USB_PRODUCT_CY7C65632 0x6570
#define HUB_QUIRK_CHECK_PORT_AUTOSUSPEND 0x01
#define HUB_QUIRK_DISABLE_AUTOSUSPEND 0x02
@@ -5644,6 +5646,11 @@ static const struct usb_device_id hub_id
.bInterfaceClass = USB_CLASS_HUB,
.driver_info = HUB_QUIRK_DISABLE_AUTOSUSPEND},
{ .match_flags = USB_DEVICE_ID_MATCH_VENDOR
+ | USB_DEVICE_ID_MATCH_PRODUCT,
+ .idVendor = USB_VENDOR_CYPRESS,
+ .idProduct = USB_PRODUCT_CY7C65632,
+ .driver_info = HUB_QUIRK_DISABLE_AUTOSUSPEND},
+ { .match_flags = USB_DEVICE_ID_MATCH_VENDOR
| USB_DEVICE_ID_MATCH_INT_CLASS,
.idVendor = USB_VENDOR_GENESYS_LOGIC,
.bInterfaceClass = USB_CLASS_HUB,
From: Pavel Skripkin <[email protected]>
commit 91c02557174be7f72e46ed7311e3bea1939840b0 upstream.
Syzbot reported memory leak in SocketCAN driver for Microchip CAN BUS
Analyzer Tool. The problem was in unfreed usb_coherent.
In mcba_usb_start() 20 coherent buffers are allocated and there is
nothing, that frees them:
1) In callback function the urb is resubmitted and that's all
2) In disconnect function urbs are simply killed, but URB_FREE_BUFFER
is not set (see mcba_usb_start) and this flag cannot be used with
coherent buffers.
Fail log:
| [ 1354.053291][ T8413] mcba_usb 1-1:0.0 can0: device disconnected
| [ 1367.059384][ T8420] kmemleak: 20 new suspected memory leaks (see /sys/kernel/debug/kmem)
So, all allocated buffers should be freed with usb_free_coherent()
explicitly
NOTE:
The same pattern for allocating and freeing coherent buffers
is used in drivers/net/can/usb/kvaser_usb/kvaser_usb_core.c
Fixes: 51f3baad7de9 ("can: mcba_usb: Add support for Microchip CAN BUS Analyzer")
Link: https://lore.kernel.org/r/[email protected]
Cc: linux-stable <[email protected]>
Reported-and-tested-by: [email protected]
Signed-off-by: Pavel Skripkin <[email protected]>
Signed-off-by: Marc Kleine-Budde <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/can/usb/mcba_usb.c | 17 +++++++++++++++--
1 file changed, 15 insertions(+), 2 deletions(-)
--- a/drivers/net/can/usb/mcba_usb.c
+++ b/drivers/net/can/usb/mcba_usb.c
@@ -82,6 +82,8 @@ struct mcba_priv {
bool can_ka_first_pass;
bool can_speed_check;
atomic_t free_ctx_cnt;
+ void *rxbuf[MCBA_MAX_RX_URBS];
+ dma_addr_t rxbuf_dma[MCBA_MAX_RX_URBS];
};
/* CAN frame */
@@ -633,6 +635,7 @@ static int mcba_usb_start(struct mcba_pr
for (i = 0; i < MCBA_MAX_RX_URBS; i++) {
struct urb *urb = NULL;
u8 *buf;
+ dma_addr_t buf_dma;
/* create a URB, and a buffer for it */
urb = usb_alloc_urb(0, GFP_KERNEL);
@@ -642,7 +645,7 @@ static int mcba_usb_start(struct mcba_pr
}
buf = usb_alloc_coherent(priv->udev, MCBA_USB_RX_BUFF_SIZE,
- GFP_KERNEL, &urb->transfer_dma);
+ GFP_KERNEL, &buf_dma);
if (!buf) {
netdev_err(netdev, "No memory left for USB buffer\n");
usb_free_urb(urb);
@@ -661,11 +664,14 @@ static int mcba_usb_start(struct mcba_pr
if (err) {
usb_unanchor_urb(urb);
usb_free_coherent(priv->udev, MCBA_USB_RX_BUFF_SIZE,
- buf, urb->transfer_dma);
+ buf, buf_dma);
usb_free_urb(urb);
break;
}
+ priv->rxbuf[i] = buf;
+ priv->rxbuf_dma[i] = buf_dma;
+
/* Drop reference, USB core will take care of freeing it */
usb_free_urb(urb);
}
@@ -708,7 +714,14 @@ static int mcba_usb_open(struct net_devi
static void mcba_urb_unlink(struct mcba_priv *priv)
{
+ int i;
+
usb_kill_anchored_urbs(&priv->rx_submitted);
+
+ for (i = 0; i < MCBA_MAX_RX_URBS; ++i)
+ usb_free_coherent(priv->udev, MCBA_USB_RX_BUFF_SIZE,
+ priv->rxbuf[i], priv->rxbuf_dma[i]);
+
usb_kill_anchored_urbs(&priv->tx_submitted);
}
From: Oleksij Rempel <[email protected]>
commit 2030043e616cab40f510299f09b636285e0a3678 upstream.
This patch fixes a Use-after-Free found by the syzbot.
The problem is that a skb is taken from the per-session skb queue,
without incrementing the ref count. This leads to a Use-after-Free if
the skb is taken concurrently from the session queue due to a CTS.
Fixes: 9d71dd0c7009 ("can: add support of SAE J1939 protocol")
Link: https://lore.kernel.org/r/[email protected]
Cc: Hillf Danton <[email protected]>
Cc: linux-stable <[email protected]>
Reported-by: [email protected]
Reported-by: [email protected]
Signed-off-by: Oleksij Rempel <[email protected]>
Signed-off-by: Marc Kleine-Budde <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/can/j1939/transport.c | 54 ++++++++++++++++++++++++++++++++++------------
1 file changed, 40 insertions(+), 14 deletions(-)
--- a/net/can/j1939/transport.c
+++ b/net/can/j1939/transport.c
@@ -330,6 +330,9 @@ static void j1939_session_skb_drop_old(s
if ((do_skcb->offset + do_skb->len) < offset_start) {
__skb_unlink(do_skb, &session->skb_queue);
+ /* drop ref taken in j1939_session_skb_queue() */
+ skb_unref(do_skb);
+
kfree_skb(do_skb);
}
spin_unlock_irqrestore(&session->skb_queue.lock, flags);
@@ -349,12 +352,13 @@ void j1939_session_skb_queue(struct j193
skcb->flags |= J1939_ECU_LOCAL_SRC;
+ skb_get(skb);
skb_queue_tail(&session->skb_queue, skb);
}
static struct
-sk_buff *j1939_session_skb_find_by_offset(struct j1939_session *session,
- unsigned int offset_start)
+sk_buff *j1939_session_skb_get_by_offset(struct j1939_session *session,
+ unsigned int offset_start)
{
struct j1939_priv *priv = session->priv;
struct j1939_sk_buff_cb *do_skcb;
@@ -371,6 +375,10 @@ sk_buff *j1939_session_skb_find_by_offse
skb = do_skb;
}
}
+
+ if (skb)
+ skb_get(skb);
+
spin_unlock_irqrestore(&session->skb_queue.lock, flags);
if (!skb)
@@ -381,12 +389,12 @@ sk_buff *j1939_session_skb_find_by_offse
return skb;
}
-static struct sk_buff *j1939_session_skb_find(struct j1939_session *session)
+static struct sk_buff *j1939_session_skb_get(struct j1939_session *session)
{
unsigned int offset_start;
offset_start = session->pkt.dpo * 7;
- return j1939_session_skb_find_by_offset(session, offset_start);
+ return j1939_session_skb_get_by_offset(session, offset_start);
}
/* see if we are receiver
@@ -776,7 +784,7 @@ static int j1939_session_tx_dat(struct j
int ret = 0;
u8 dat[8];
- se_skb = j1939_session_skb_find_by_offset(session, session->pkt.tx * 7);
+ se_skb = j1939_session_skb_get_by_offset(session, session->pkt.tx * 7);
if (!se_skb)
return -ENOBUFS;
@@ -801,7 +809,8 @@ static int j1939_session_tx_dat(struct j
netdev_err_once(priv->ndev,
"%s: 0x%p: requested data outside of queued buffer: offset %i, len %i, pkt.tx: %i\n",
__func__, session, skcb->offset, se_skb->len , session->pkt.tx);
- return -EOVERFLOW;
+ ret = -EOVERFLOW;
+ goto out_free;
}
if (!len) {
@@ -835,6 +844,12 @@ static int j1939_session_tx_dat(struct j
if (pkt_done)
j1939_tp_set_rxtimeout(session, 250);
+ out_free:
+ if (ret)
+ kfree_skb(se_skb);
+ else
+ consume_skb(se_skb);
+
return ret;
}
@@ -1007,7 +1022,7 @@ static int j1939_xtp_txnext_receiver(str
static int j1939_simple_txnext(struct j1939_session *session)
{
struct j1939_priv *priv = session->priv;
- struct sk_buff *se_skb = j1939_session_skb_find(session);
+ struct sk_buff *se_skb = j1939_session_skb_get(session);
struct sk_buff *skb;
int ret;
@@ -1015,8 +1030,10 @@ static int j1939_simple_txnext(struct j1
return 0;
skb = skb_clone(se_skb, GFP_ATOMIC);
- if (!skb)
- return -ENOMEM;
+ if (!skb) {
+ ret = -ENOMEM;
+ goto out_free;
+ }
can_skb_set_owner(skb, se_skb->sk);
@@ -1024,12 +1041,18 @@ static int j1939_simple_txnext(struct j1
ret = j1939_send_one(priv, skb);
if (ret)
- return ret;
+ goto out_free;
j1939_sk_errqueue(session, J1939_ERRQUEUE_SCHED);
j1939_sk_queue_activate_next(session);
- return 0;
+ out_free:
+ if (ret)
+ kfree_skb(se_skb);
+ else
+ consume_skb(se_skb);
+
+ return ret;
}
static bool j1939_session_deactivate_locked(struct j1939_session *session)
@@ -1170,9 +1193,10 @@ static void j1939_session_completed(stru
struct sk_buff *skb;
if (!session->transmission) {
- skb = j1939_session_skb_find(session);
+ skb = j1939_session_skb_get(session);
/* distribute among j1939 receivers */
j1939_sk_recv(session->priv, skb);
+ consume_skb(skb);
}
j1939_session_deactivate_activate_next(session);
@@ -1744,7 +1768,7 @@ static void j1939_xtp_rx_dat_one(struct
{
struct j1939_priv *priv = session->priv;
struct j1939_sk_buff_cb *skcb;
- struct sk_buff *se_skb;
+ struct sk_buff *se_skb = NULL;
const u8 *dat;
u8 *tpdat;
int offset;
@@ -1786,7 +1810,7 @@ static void j1939_xtp_rx_dat_one(struct
goto out_session_cancel;
}
- se_skb = j1939_session_skb_find_by_offset(session, packet * 7);
+ se_skb = j1939_session_skb_get_by_offset(session, packet * 7);
if (!se_skb) {
netdev_warn(priv->ndev, "%s: 0x%p: no skb found\n", __func__,
session);
@@ -1848,11 +1872,13 @@ static void j1939_xtp_rx_dat_one(struct
j1939_tp_set_rxtimeout(session, 250);
}
session->last_cmd = 0xff;
+ consume_skb(se_skb);
j1939_session_put(session);
return;
out_session_cancel:
+ kfree_skb(se_skb);
j1939_session_timers_cancel(session);
j1939_session_cancel(session, J1939_XTP_ABORT_FAULT);
j1939_session_put(session);
From: Marc Zyngier <[email protected]>
[ Upstream commit 382e6e177bc1c02473e56591fe5083ae1e4904f6 ]
The arm64 entry code suffers from an annoying issue on taking
a NMI, as it sets PMR to a value that actually allows IRQs
to be acknowledged. This is done for consistency with other parts
of the code, and is in the process of being fixed. This shouldn't
be a problem, as we are not enabling interrupts whilst in NMI
context.
However, in the infortunate scenario that we took a spurious NMI
(retired before the read of IAR) *and* that there is an IRQ pending
at the same time, we'll ack the IRQ in NMI context. Too bad.
In order to avoid deadlocks while running something like perf,
teach the GICv3 driver about this situation: if we were in
a context where no interrupt should have fired, transiently
set PMR to a value that only allows NMIs before acking the pending
interrupt, and restore the original value after that.
This papers over the core issue for the time being, and makes
NMIs great again. Sort of.
Fixes: 4d6a38da8e79e94c ("arm64: entry: always set GIC_PRIO_PSR_I_SET during entry")
Co-developed-by: Mark Rutland <[email protected]>
Signed-off-by: Mark Rutland <[email protected]>
Signed-off-by: Marc Zyngier <[email protected]>
Reviewed-by: Mark Rutland <[email protected]>
Link: https://lore.kernel.org/lkml/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/irqchip/irq-gic-v3.c | 36 +++++++++++++++++++++++++++++++++++-
1 file changed, 35 insertions(+), 1 deletion(-)
diff --git a/drivers/irqchip/irq-gic-v3.c b/drivers/irqchip/irq-gic-v3.c
index 7929bf12651c..1005b182bab4 100644
--- a/drivers/irqchip/irq-gic-v3.c
+++ b/drivers/irqchip/irq-gic-v3.c
@@ -642,11 +642,45 @@ static inline void gic_handle_nmi(u32 irqnr, struct pt_regs *regs)
nmi_exit();
}
+static u32 do_read_iar(struct pt_regs *regs)
+{
+ u32 iar;
+
+ if (gic_supports_nmi() && unlikely(!interrupts_enabled(regs))) {
+ u64 pmr;
+
+ /*
+ * We were in a context with IRQs disabled. However, the
+ * entry code has set PMR to a value that allows any
+ * interrupt to be acknowledged, and not just NMIs. This can
+ * lead to surprising effects if the NMI has been retired in
+ * the meantime, and that there is an IRQ pending. The IRQ
+ * would then be taken in NMI context, something that nobody
+ * wants to debug twice.
+ *
+ * Until we sort this, drop PMR again to a level that will
+ * actually only allow NMIs before reading IAR, and then
+ * restore it to what it was.
+ */
+ pmr = gic_read_pmr();
+ gic_pmr_mask_irqs();
+ isb();
+
+ iar = gic_read_iar();
+
+ gic_write_pmr(pmr);
+ } else {
+ iar = gic_read_iar();
+ }
+
+ return iar;
+}
+
static asmlinkage void __exception_irq_entry gic_handle_irq(struct pt_regs *regs)
{
u32 irqnr;
- irqnr = gic_read_iar();
+ irqnr = do_read_iar(regs);
/* Check for special IDs first */
if ((irqnr >= 1020 && irqnr <= 1023))
--
2.30.2
From: Pali Rohár <[email protected]>
commit f18139966d072dab8e4398c95ce955a9742e04f7 upstream.
Trying to start a new PIO transfer by writing value 0 in PIO_START register
when previous transfer has not yet completed (which is indicated by value 1
in PIO_START) causes an External Abort on CPU, which results in kernel
panic:
SError Interrupt on CPU0, code 0xbf000002 -- SError
Kernel panic - not syncing: Asynchronous SError Interrupt
To prevent kernel panic, it is required to reject a new PIO transfer when
previous one has not finished yet.
If previous PIO transfer is not finished yet, the kernel may issue a new
PIO request only if the previous PIO transfer timed out.
In the past the root cause of this issue was incorrectly identified (as it
often happens during link retraining or after link down event) and special
hack was implemented in Trusted Firmware to catch all SError events in EL3,
to ignore errors with code 0xbf000002 and not forwarding any other errors
to kernel and instead throw panic from EL3 Trusted Firmware handler.
Links to discussion and patches about this issue:
https://git.trustedfirmware.org/TF-A/trusted-firmware-a.git/commit/?id=3c7dcdac5c50
https://lore.kernel.org/linux-pci/[email protected]/
https://lore.kernel.org/linux-pci/[email protected]/
https://review.trustedfirmware.org/c/TF-A/trusted-firmware-a/+/1541
But the real cause was the fact that during link retraining or after link
down event the PIO transfer may take longer time, up to the 1.44s until it
times out. This increased probability that a new PIO transfer would be
issued by kernel while previous one has not finished yet.
After applying this change into the kernel, it is possible to revert the
mentioned TF-A hack and SError events do not have to be caught in TF-A EL3.
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Pali Rohár <[email protected]>
Signed-off-by: Lorenzo Pieralisi <[email protected]>
Signed-off-by: Bjorn Helgaas <[email protected]>
Reviewed-by: Marek Behún <[email protected]>
Cc: [email protected] # 7fbcb5da811b ("PCI: aardvark: Don't rely on jiffies while holding spinlock")
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/pci/controller/pci-aardvark.c | 49 +++++++++++++++++++++++++++-------
1 file changed, 40 insertions(+), 9 deletions(-)
--- a/drivers/pci/controller/pci-aardvark.c
+++ b/drivers/pci/controller/pci-aardvark.c
@@ -514,7 +514,7 @@ static int advk_pcie_wait_pio(struct adv
udelay(PIO_RETRY_DELAY);
}
- dev_err(dev, "config read/write timed out\n");
+ dev_err(dev, "PIO read/write transfer time out\n");
return -ETIMEDOUT;
}
@@ -657,6 +657,35 @@ static bool advk_pcie_valid_device(struc
return true;
}
+static bool advk_pcie_pio_is_running(struct advk_pcie *pcie)
+{
+ struct device *dev = &pcie->pdev->dev;
+
+ /*
+ * Trying to start a new PIO transfer when previous has not completed
+ * cause External Abort on CPU which results in kernel panic:
+ *
+ * SError Interrupt on CPU0, code 0xbf000002 -- SError
+ * Kernel panic - not syncing: Asynchronous SError Interrupt
+ *
+ * Functions advk_pcie_rd_conf() and advk_pcie_wr_conf() are protected
+ * by raw_spin_lock_irqsave() at pci_lock_config() level to prevent
+ * concurrent calls at the same time. But because PIO transfer may take
+ * about 1.5s when link is down or card is disconnected, it means that
+ * advk_pcie_wait_pio() does not always have to wait for completion.
+ *
+ * Some versions of ARM Trusted Firmware handles this External Abort at
+ * EL3 level and mask it to prevent kernel panic. Relevant TF-A commit:
+ * https://git.trustedfirmware.org/TF-A/trusted-firmware-a.git/commit/?id=3c7dcdac5c50
+ */
+ if (advk_readl(pcie, PIO_START)) {
+ dev_err(dev, "Previous PIO read/write transfer is still running\n");
+ return true;
+ }
+
+ return false;
+}
+
static int advk_pcie_rd_conf(struct pci_bus *bus, u32 devfn,
int where, int size, u32 *val)
{
@@ -673,9 +702,10 @@ static int advk_pcie_rd_conf(struct pci_
return pci_bridge_emul_conf_read(&pcie->bridge, where,
size, val);
- /* Start PIO */
- advk_writel(pcie, 0, PIO_START);
- advk_writel(pcie, 1, PIO_ISR);
+ if (advk_pcie_pio_is_running(pcie)) {
+ *val = 0xffffffff;
+ return PCIBIOS_SET_FAILED;
+ }
/* Program the control register */
reg = advk_readl(pcie, PIO_CTRL);
@@ -694,7 +724,8 @@ static int advk_pcie_rd_conf(struct pci_
/* Program the data strobe */
advk_writel(pcie, 0xf, PIO_WR_DATA_STRB);
- /* Start the transfer */
+ /* Clear PIO DONE ISR and start the transfer */
+ advk_writel(pcie, 1, PIO_ISR);
advk_writel(pcie, 1, PIO_START);
ret = advk_pcie_wait_pio(pcie);
@@ -734,9 +765,8 @@ static int advk_pcie_wr_conf(struct pci_
if (where % size)
return PCIBIOS_SET_FAILED;
- /* Start PIO */
- advk_writel(pcie, 0, PIO_START);
- advk_writel(pcie, 1, PIO_ISR);
+ if (advk_pcie_pio_is_running(pcie))
+ return PCIBIOS_SET_FAILED;
/* Program the control register */
reg = advk_readl(pcie, PIO_CTRL);
@@ -763,7 +793,8 @@ static int advk_pcie_wr_conf(struct pci_
/* Program the data strobe */
advk_writel(pcie, data_strobe, PIO_WR_DATA_STRB);
- /* Start the transfer */
+ /* Clear PIO DONE ISR and start the transfer */
+ advk_writel(pcie, 1, PIO_ISR);
advk_writel(pcie, 1, PIO_START);
ret = advk_pcie_wait_pio(pcie);
From: zpershuai <[email protected]>
[ Upstream commit f131767eefc47de2f8afb7950cdea78397997d66 ]
In zynq_qspi_probe function, when enable the device clock is done,
the return of all the functions should goto the clk_dis_all label.
If num_cs is not right then this should return a negative error
code but currently it returns success.
Signed-off-by: zpershuai <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/spi/spi-zynq-qspi.c | 7 ++++---
1 file changed, 4 insertions(+), 3 deletions(-)
diff --git a/drivers/spi/spi-zynq-qspi.c b/drivers/spi/spi-zynq-qspi.c
index 2765289028fa..68193db8b2e3 100644
--- a/drivers/spi/spi-zynq-qspi.c
+++ b/drivers/spi/spi-zynq-qspi.c
@@ -678,14 +678,14 @@ static int zynq_qspi_probe(struct platform_device *pdev)
xqspi->irq = platform_get_irq(pdev, 0);
if (xqspi->irq <= 0) {
ret = -ENXIO;
- goto remove_master;
+ goto clk_dis_all;
}
ret = devm_request_irq(&pdev->dev, xqspi->irq, zynq_qspi_irq,
0, pdev->name, xqspi);
if (ret != 0) {
ret = -ENXIO;
dev_err(&pdev->dev, "request_irq failed\n");
- goto remove_master;
+ goto clk_dis_all;
}
ret = of_property_read_u32(np, "num-cs",
@@ -693,8 +693,9 @@ static int zynq_qspi_probe(struct platform_device *pdev)
if (ret < 0) {
ctlr->num_chipselect = 1;
} else if (num_cs > ZYNQ_QSPI_MAX_NUM_CS) {
+ ret = -EINVAL;
dev_err(&pdev->dev, "only 2 chip selects are available\n");
- goto remove_master;
+ goto clk_dis_all;
} else {
ctlr->num_chipselect = num_cs;
}
--
2.30.2
From: Norbert Slusarek <[email protected]>
commit 5e87ddbe3942e27e939bdc02deb8579b0cbd8ecc upstream.
On 64-bit systems, struct bcm_msg_head has an added padding of 4 bytes between
struct members count and ival1. Even though all struct members are initialized,
the 4-byte hole will contain data from the kernel stack. This patch zeroes out
struct bcm_msg_head before usage, preventing infoleaks to userspace.
Fixes: ffd980f976e7 ("[CAN]: Add broadcast manager (bcm) protocol")
Link: https://lore.kernel.org/r/trinity-7c1b2e82-e34f-4885-8060-2cd7a13769ce-1623532166177@3c-app-gmx-bs52
Cc: linux-stable <[email protected]>
Signed-off-by: Norbert Slusarek <[email protected]>
Acked-by: Oliver Hartkopp <[email protected]>
Signed-off-by: Marc Kleine-Budde <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/can/bcm.c | 3 +++
1 file changed, 3 insertions(+)
--- a/net/can/bcm.c
+++ b/net/can/bcm.c
@@ -402,6 +402,7 @@ static enum hrtimer_restart bcm_tx_timeo
if (!op->count && (op->flags & TX_COUNTEVT)) {
/* create notification to user */
+ memset(&msg_head, 0, sizeof(msg_head));
msg_head.opcode = TX_EXPIRED;
msg_head.flags = op->flags;
msg_head.count = op->count;
@@ -439,6 +440,7 @@ static void bcm_rx_changed(struct bcm_op
/* this element is not throttled anymore */
data->flags &= (BCM_CAN_FLAGS_MASK|RX_RECV);
+ memset(&head, 0, sizeof(head));
head.opcode = RX_CHANGED;
head.flags = op->flags;
head.count = op->count;
@@ -560,6 +562,7 @@ static enum hrtimer_restart bcm_rx_timeo
}
/* create notification to user */
+ memset(&msg_head, 0, sizeof(msg_head));
msg_head.opcode = RX_TIMEOUT;
msg_head.flags = op->flags;
msg_head.count = op->count;
From: Tetsuo Handa <[email protected]>
commit 8d0caedb759683041d9db82069937525999ada53 upstream.
syzbot is reporting hung task at register_netdevice_notifier() [1] and
unregister_netdevice_notifier() [2], for cleanup_net() might perform
time consuming operations while CAN driver's raw/bcm/isotp modules are
calling {register,unregister}_netdevice_notifier() on each socket.
Change raw/bcm/isotp modules to call register_netdevice_notifier() from
module's __init function and call unregister_netdevice_notifier() from
module's __exit function, as with gw/j1939 modules are doing.
Link: https://syzkaller.appspot.com/bug?id=391b9498827788b3cc6830226d4ff5be87107c30 [1]
Link: https://syzkaller.appspot.com/bug?id=1724d278c83ca6e6df100a2e320c10d991cf2bce [2]
Link: https://lore.kernel.org/r/[email protected]
Cc: linux-stable <[email protected]>
Reported-by: syzbot <[email protected]>
Reported-by: syzbot <[email protected]>
Reviewed-by: Kirill Tkhai <[email protected]>
Tested-by: syzbot <[email protected]>
Tested-by: Oliver Hartkopp <[email protected]>
Signed-off-by: Tetsuo Handa <[email protected]>
Signed-off-by: Marc Kleine-Budde <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/can/bcm.c | 59 +++++++++++++++++++++++++++++++++++++++++------------
net/can/isotp.c | 61 +++++++++++++++++++++++++++++++++++++++++++------------
net/can/raw.c | 62 +++++++++++++++++++++++++++++++++++++++++++-------------
3 files changed, 142 insertions(+), 40 deletions(-)
--- a/net/can/bcm.c
+++ b/net/can/bcm.c
@@ -125,7 +125,7 @@ struct bcm_sock {
struct sock sk;
int bound;
int ifindex;
- struct notifier_block notifier;
+ struct list_head notifier;
struct list_head rx_ops;
struct list_head tx_ops;
unsigned long dropped_usr_msgs;
@@ -133,6 +133,10 @@ struct bcm_sock {
char procname [32]; /* inode number in decimal with \0 */
};
+static LIST_HEAD(bcm_notifier_list);
+static DEFINE_SPINLOCK(bcm_notifier_lock);
+static struct bcm_sock *bcm_busy_notifier;
+
static inline struct bcm_sock *bcm_sk(const struct sock *sk)
{
return (struct bcm_sock *)sk;
@@ -1381,20 +1385,15 @@ static int bcm_sendmsg(struct socket *so
/*
* notification handler for netdevice status changes
*/
-static int bcm_notifier(struct notifier_block *nb, unsigned long msg,
- void *ptr)
+static void bcm_notify(struct bcm_sock *bo, unsigned long msg,
+ struct net_device *dev)
{
- struct net_device *dev = netdev_notifier_info_to_dev(ptr);
- struct bcm_sock *bo = container_of(nb, struct bcm_sock, notifier);
struct sock *sk = &bo->sk;
struct bcm_op *op;
int notify_enodev = 0;
if (!net_eq(dev_net(dev), sock_net(sk)))
- return NOTIFY_DONE;
-
- if (dev->type != ARPHRD_CAN)
- return NOTIFY_DONE;
+ return;
switch (msg) {
@@ -1429,7 +1428,28 @@ static int bcm_notifier(struct notifier_
sk->sk_error_report(sk);
}
}
+}
+static int bcm_notifier(struct notifier_block *nb, unsigned long msg,
+ void *ptr)
+{
+ struct net_device *dev = netdev_notifier_info_to_dev(ptr);
+
+ if (dev->type != ARPHRD_CAN)
+ return NOTIFY_DONE;
+ if (msg != NETDEV_UNREGISTER && msg != NETDEV_DOWN)
+ return NOTIFY_DONE;
+ if (unlikely(bcm_busy_notifier)) /* Check for reentrant bug. */
+ return NOTIFY_DONE;
+
+ spin_lock(&bcm_notifier_lock);
+ list_for_each_entry(bcm_busy_notifier, &bcm_notifier_list, notifier) {
+ spin_unlock(&bcm_notifier_lock);
+ bcm_notify(bcm_busy_notifier, msg, dev);
+ spin_lock(&bcm_notifier_lock);
+ }
+ bcm_busy_notifier = NULL;
+ spin_unlock(&bcm_notifier_lock);
return NOTIFY_DONE;
}
@@ -1449,9 +1469,9 @@ static int bcm_init(struct sock *sk)
INIT_LIST_HEAD(&bo->rx_ops);
/* set notifier */
- bo->notifier.notifier_call = bcm_notifier;
-
- register_netdevice_notifier(&bo->notifier);
+ spin_lock(&bcm_notifier_lock);
+ list_add_tail(&bo->notifier, &bcm_notifier_list);
+ spin_unlock(&bcm_notifier_lock);
return 0;
}
@@ -1474,7 +1494,14 @@ static int bcm_release(struct socket *so
/* remove bcm_ops, timer, rx_unregister(), etc. */
- unregister_netdevice_notifier(&bo->notifier);
+ spin_lock(&bcm_notifier_lock);
+ while (bcm_busy_notifier == bo) {
+ spin_unlock(&bcm_notifier_lock);
+ schedule_timeout_uninterruptible(1);
+ spin_lock(&bcm_notifier_lock);
+ }
+ list_del(&bo->notifier);
+ spin_unlock(&bcm_notifier_lock);
lock_sock(sk);
@@ -1695,6 +1722,10 @@ static struct pernet_operations canbcm_p
.exit = canbcm_pernet_exit,
};
+static struct notifier_block canbcm_notifier = {
+ .notifier_call = bcm_notifier
+};
+
static int __init bcm_module_init(void)
{
int err;
@@ -1708,12 +1739,14 @@ static int __init bcm_module_init(void)
}
register_pernet_subsys(&canbcm_pernet_ops);
+ register_netdevice_notifier(&canbcm_notifier);
return 0;
}
static void __exit bcm_module_exit(void)
{
can_proto_unregister(&bcm_can_proto);
+ unregister_netdevice_notifier(&canbcm_notifier);
unregister_pernet_subsys(&canbcm_pernet_ops);
}
--- a/net/can/isotp.c
+++ b/net/can/isotp.c
@@ -143,10 +143,14 @@ struct isotp_sock {
u32 force_tx_stmin;
u32 force_rx_stmin;
struct tpcon rx, tx;
- struct notifier_block notifier;
+ struct list_head notifier;
wait_queue_head_t wait;
};
+static LIST_HEAD(isotp_notifier_list);
+static DEFINE_SPINLOCK(isotp_notifier_lock);
+static struct isotp_sock *isotp_busy_notifier;
+
static inline struct isotp_sock *isotp_sk(const struct sock *sk)
{
return (struct isotp_sock *)sk;
@@ -1008,7 +1012,14 @@ static int isotp_release(struct socket *
/* wait for complete transmission of current pdu */
wait_event_interruptible(so->wait, so->tx.state == ISOTP_IDLE);
- unregister_netdevice_notifier(&so->notifier);
+ spin_lock(&isotp_notifier_lock);
+ while (isotp_busy_notifier == so) {
+ spin_unlock(&isotp_notifier_lock);
+ schedule_timeout_uninterruptible(1);
+ spin_lock(&isotp_notifier_lock);
+ }
+ list_del(&so->notifier);
+ spin_unlock(&isotp_notifier_lock);
lock_sock(sk);
@@ -1284,21 +1295,16 @@ static int isotp_getsockopt(struct socke
return 0;
}
-static int isotp_notifier(struct notifier_block *nb, unsigned long msg,
- void *ptr)
+static void isotp_notify(struct isotp_sock *so, unsigned long msg,
+ struct net_device *dev)
{
- struct net_device *dev = netdev_notifier_info_to_dev(ptr);
- struct isotp_sock *so = container_of(nb, struct isotp_sock, notifier);
struct sock *sk = &so->sk;
if (!net_eq(dev_net(dev), sock_net(sk)))
- return NOTIFY_DONE;
-
- if (dev->type != ARPHRD_CAN)
- return NOTIFY_DONE;
+ return;
if (so->ifindex != dev->ifindex)
- return NOTIFY_DONE;
+ return;
switch (msg) {
case NETDEV_UNREGISTER:
@@ -1324,7 +1330,28 @@ static int isotp_notifier(struct notifie
sk->sk_error_report(sk);
break;
}
+}
+static int isotp_notifier(struct notifier_block *nb, unsigned long msg,
+ void *ptr)
+{
+ struct net_device *dev = netdev_notifier_info_to_dev(ptr);
+
+ if (dev->type != ARPHRD_CAN)
+ return NOTIFY_DONE;
+ if (msg != NETDEV_UNREGISTER && msg != NETDEV_DOWN)
+ return NOTIFY_DONE;
+ if (unlikely(isotp_busy_notifier)) /* Check for reentrant bug. */
+ return NOTIFY_DONE;
+
+ spin_lock(&isotp_notifier_lock);
+ list_for_each_entry(isotp_busy_notifier, &isotp_notifier_list, notifier) {
+ spin_unlock(&isotp_notifier_lock);
+ isotp_notify(isotp_busy_notifier, msg, dev);
+ spin_lock(&isotp_notifier_lock);
+ }
+ isotp_busy_notifier = NULL;
+ spin_unlock(&isotp_notifier_lock);
return NOTIFY_DONE;
}
@@ -1361,8 +1388,9 @@ static int isotp_init(struct sock *sk)
init_waitqueue_head(&so->wait);
- so->notifier.notifier_call = isotp_notifier;
- register_netdevice_notifier(&so->notifier);
+ spin_lock(&isotp_notifier_lock);
+ list_add_tail(&so->notifier, &isotp_notifier_list);
+ spin_unlock(&isotp_notifier_lock);
return 0;
}
@@ -1409,6 +1437,10 @@ static const struct can_proto isotp_can_
.prot = &isotp_proto,
};
+static struct notifier_block canisotp_notifier = {
+ .notifier_call = isotp_notifier
+};
+
static __init int isotp_module_init(void)
{
int err;
@@ -1418,6 +1450,8 @@ static __init int isotp_module_init(void
err = can_proto_register(&isotp_can_proto);
if (err < 0)
pr_err("can: registration of isotp protocol failed\n");
+ else
+ register_netdevice_notifier(&canisotp_notifier);
return err;
}
@@ -1425,6 +1459,7 @@ static __init int isotp_module_init(void
static __exit void isotp_module_exit(void)
{
can_proto_unregister(&isotp_can_proto);
+ unregister_netdevice_notifier(&canisotp_notifier);
}
module_init(isotp_module_init);
--- a/net/can/raw.c
+++ b/net/can/raw.c
@@ -83,7 +83,7 @@ struct raw_sock {
struct sock sk;
int bound;
int ifindex;
- struct notifier_block notifier;
+ struct list_head notifier;
int loopback;
int recv_own_msgs;
int fd_frames;
@@ -95,6 +95,10 @@ struct raw_sock {
struct uniqframe __percpu *uniq;
};
+static LIST_HEAD(raw_notifier_list);
+static DEFINE_SPINLOCK(raw_notifier_lock);
+static struct raw_sock *raw_busy_notifier;
+
/* Return pointer to store the extra msg flags for raw_recvmsg().
* We use the space of one unsigned int beyond the 'struct sockaddr_can'
* in skb->cb.
@@ -263,21 +267,16 @@ static int raw_enable_allfilters(struct
return err;
}
-static int raw_notifier(struct notifier_block *nb,
- unsigned long msg, void *ptr)
+static void raw_notify(struct raw_sock *ro, unsigned long msg,
+ struct net_device *dev)
{
- struct net_device *dev = netdev_notifier_info_to_dev(ptr);
- struct raw_sock *ro = container_of(nb, struct raw_sock, notifier);
struct sock *sk = &ro->sk;
if (!net_eq(dev_net(dev), sock_net(sk)))
- return NOTIFY_DONE;
-
- if (dev->type != ARPHRD_CAN)
- return NOTIFY_DONE;
+ return;
if (ro->ifindex != dev->ifindex)
- return NOTIFY_DONE;
+ return;
switch (msg) {
case NETDEV_UNREGISTER:
@@ -305,7 +304,28 @@ static int raw_notifier(struct notifier_
sk->sk_error_report(sk);
break;
}
+}
+
+static int raw_notifier(struct notifier_block *nb, unsigned long msg,
+ void *ptr)
+{
+ struct net_device *dev = netdev_notifier_info_to_dev(ptr);
+
+ if (dev->type != ARPHRD_CAN)
+ return NOTIFY_DONE;
+ if (msg != NETDEV_UNREGISTER && msg != NETDEV_DOWN)
+ return NOTIFY_DONE;
+ if (unlikely(raw_busy_notifier)) /* Check for reentrant bug. */
+ return NOTIFY_DONE;
+ spin_lock(&raw_notifier_lock);
+ list_for_each_entry(raw_busy_notifier, &raw_notifier_list, notifier) {
+ spin_unlock(&raw_notifier_lock);
+ raw_notify(raw_busy_notifier, msg, dev);
+ spin_lock(&raw_notifier_lock);
+ }
+ raw_busy_notifier = NULL;
+ spin_unlock(&raw_notifier_lock);
return NOTIFY_DONE;
}
@@ -334,9 +354,9 @@ static int raw_init(struct sock *sk)
return -ENOMEM;
/* set notifier */
- ro->notifier.notifier_call = raw_notifier;
-
- register_netdevice_notifier(&ro->notifier);
+ spin_lock(&raw_notifier_lock);
+ list_add_tail(&ro->notifier, &raw_notifier_list);
+ spin_unlock(&raw_notifier_lock);
return 0;
}
@@ -351,7 +371,14 @@ static int raw_release(struct socket *so
ro = raw_sk(sk);
- unregister_netdevice_notifier(&ro->notifier);
+ spin_lock(&raw_notifier_lock);
+ while (raw_busy_notifier == ro) {
+ spin_unlock(&raw_notifier_lock);
+ schedule_timeout_uninterruptible(1);
+ spin_lock(&raw_notifier_lock);
+ }
+ list_del(&ro->notifier);
+ spin_unlock(&raw_notifier_lock);
lock_sock(sk);
@@ -881,6 +908,10 @@ static const struct can_proto raw_can_pr
.prot = &raw_proto,
};
+static struct notifier_block canraw_notifier = {
+ .notifier_call = raw_notifier
+};
+
static __init int raw_module_init(void)
{
int err;
@@ -890,6 +921,8 @@ static __init int raw_module_init(void)
err = can_proto_register(&raw_can_proto);
if (err < 0)
pr_err("can: registration of raw protocol failed\n");
+ else
+ register_netdevice_notifier(&canraw_notifier);
return err;
}
@@ -897,6 +930,7 @@ static __init int raw_module_init(void)
static __exit void raw_module_exit(void)
{
can_proto_unregister(&raw_can_proto);
+ unregister_netdevice_notifier(&canraw_notifier);
}
module_init(raw_module_init);
From: Srinivasa Rao Mandadapu <[email protected]>
[ Upstream commit c8a4556d98510ca05bad8d02265a4918b03a8c0b ]
This patch fixes PoP noise of around 15ms observed during audio
capture begin.
Enables BCLK and LRCLK in snd_soc_dai_ops prepare call for
introducing some delay before capture start.
(am from https://patchwork.kernel.org/patch/12276369/)
(also found at https://lore.kernel.org/r/[email protected])
Co-developed-by: Judy Hsiao <[email protected]>
Signed-off-by: Judy Hsiao <[email protected]>
Signed-off-by: Srinivasa Rao Mandadapu <[email protected]>
Reviewed-by: Srinivas Kandagatla <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/soc/qcom/lpass-cpu.c | 79 ++++++++++++++++++++++++++++++++++++++
sound/soc/qcom/lpass.h | 4 ++
2 files changed, 83 insertions(+)
diff --git a/sound/soc/qcom/lpass-cpu.c b/sound/soc/qcom/lpass-cpu.c
index 7a30a12519a7..e620a62ef534 100644
--- a/sound/soc/qcom/lpass-cpu.c
+++ b/sound/soc/qcom/lpass-cpu.c
@@ -93,8 +93,30 @@ static void lpass_cpu_daiops_shutdown(struct snd_pcm_substream *substream,
struct snd_soc_dai *dai)
{
struct lpass_data *drvdata = snd_soc_dai_get_drvdata(dai);
+ struct lpaif_i2sctl *i2sctl = drvdata->i2sctl;
+ unsigned int id = dai->driver->id;
clk_disable_unprepare(drvdata->mi2s_osr_clk[dai->driver->id]);
+ /*
+ * Ensure LRCLK is disabled even in device node validation.
+ * Will not impact if disabled in lpass_cpu_daiops_trigger()
+ * suspend.
+ */
+ if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
+ regmap_fields_write(i2sctl->spken, id, LPAIF_I2SCTL_SPKEN_DISABLE);
+ else
+ regmap_fields_write(i2sctl->micen, id, LPAIF_I2SCTL_MICEN_DISABLE);
+
+ /*
+ * BCLK may not be enabled if lpass_cpu_daiops_prepare is called before
+ * lpass_cpu_daiops_shutdown. It's paired with the clk_enable in
+ * lpass_cpu_daiops_prepare.
+ */
+ if (drvdata->mi2s_was_prepared[dai->driver->id]) {
+ drvdata->mi2s_was_prepared[dai->driver->id] = false;
+ clk_disable(drvdata->mi2s_bit_clk[dai->driver->id]);
+ }
+
clk_unprepare(drvdata->mi2s_bit_clk[dai->driver->id]);
}
@@ -275,6 +297,18 @@ static int lpass_cpu_daiops_trigger(struct snd_pcm_substream *substream,
case SNDRV_PCM_TRIGGER_START:
case SNDRV_PCM_TRIGGER_RESUME:
case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
+ /*
+ * Ensure lpass BCLK/LRCLK is enabled during
+ * device resume as lpass_cpu_daiops_prepare() is not called
+ * after the device resumes. We don't check mi2s_was_prepared before
+ * enable/disable BCLK in trigger events because:
+ * 1. These trigger events are paired, so the BCLK
+ * enable_count is balanced.
+ * 2. the BCLK can be shared (ex: headset and headset mic),
+ * we need to increase the enable_count so that we don't
+ * turn off the shared BCLK while other devices are using
+ * it.
+ */
if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
ret = regmap_fields_write(i2sctl->spken, id,
LPAIF_I2SCTL_SPKEN_ENABLE);
@@ -296,6 +330,10 @@ static int lpass_cpu_daiops_trigger(struct snd_pcm_substream *substream,
case SNDRV_PCM_TRIGGER_STOP:
case SNDRV_PCM_TRIGGER_SUSPEND:
case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
+ /*
+ * To ensure lpass BCLK/LRCLK is disabled during
+ * device suspend.
+ */
if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
ret = regmap_fields_write(i2sctl->spken, id,
LPAIF_I2SCTL_SPKEN_DISABLE);
@@ -315,12 +353,53 @@ static int lpass_cpu_daiops_trigger(struct snd_pcm_substream *substream,
return ret;
}
+static int lpass_cpu_daiops_prepare(struct snd_pcm_substream *substream,
+ struct snd_soc_dai *dai)
+{
+ struct lpass_data *drvdata = snd_soc_dai_get_drvdata(dai);
+ struct lpaif_i2sctl *i2sctl = drvdata->i2sctl;
+ unsigned int id = dai->driver->id;
+ int ret;
+
+ /*
+ * Ensure lpass BCLK/LRCLK is enabled bit before playback/capture
+ * data flow starts. This allows other codec to have some delay before
+ * the data flow.
+ * (ex: to drop start up pop noise before capture starts).
+ */
+ if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
+ ret = regmap_fields_write(i2sctl->spken, id, LPAIF_I2SCTL_SPKEN_ENABLE);
+ else
+ ret = regmap_fields_write(i2sctl->micen, id, LPAIF_I2SCTL_MICEN_ENABLE);
+
+ if (ret) {
+ dev_err(dai->dev, "error writing to i2sctl reg: %d\n", ret);
+ return ret;
+ }
+
+ /*
+ * Check mi2s_was_prepared before enabling BCLK as lpass_cpu_daiops_prepare can
+ * be called multiple times. It's paired with the clk_disable in
+ * lpass_cpu_daiops_shutdown.
+ */
+ if (!drvdata->mi2s_was_prepared[dai->driver->id]) {
+ ret = clk_enable(drvdata->mi2s_bit_clk[id]);
+ if (ret) {
+ dev_err(dai->dev, "error in enabling mi2s bit clk: %d\n", ret);
+ return ret;
+ }
+ drvdata->mi2s_was_prepared[dai->driver->id] = true;
+ }
+ return 0;
+}
+
const struct snd_soc_dai_ops asoc_qcom_lpass_cpu_dai_ops = {
.set_sysclk = lpass_cpu_daiops_set_sysclk,
.startup = lpass_cpu_daiops_startup,
.shutdown = lpass_cpu_daiops_shutdown,
.hw_params = lpass_cpu_daiops_hw_params,
.trigger = lpass_cpu_daiops_trigger,
+ .prepare = lpass_cpu_daiops_prepare,
};
EXPORT_SYMBOL_GPL(asoc_qcom_lpass_cpu_dai_ops);
diff --git a/sound/soc/qcom/lpass.h b/sound/soc/qcom/lpass.h
index 1d926dd5f590..0484ad39b3dc 100644
--- a/sound/soc/qcom/lpass.h
+++ b/sound/soc/qcom/lpass.h
@@ -67,6 +67,10 @@ struct lpass_data {
/* MI2S SD lines to use for playback/capture */
unsigned int mi2s_playback_sd_mode[LPASS_MAX_MI2S_PORTS];
unsigned int mi2s_capture_sd_mode[LPASS_MAX_MI2S_PORTS];
+
+ /* The state of MI2S prepare dai_ops was called */
+ bool mi2s_was_prepared[LPASS_MAX_MI2S_PORTS];
+
int hdmi_port_enable;
/* low-power audio interface (LPAIF) registers */
--
2.30.2
From: Steven Rostedt (VMware) <[email protected]>
commit 4fdd595e4f9a1ff6d93ec702eaecae451cfc6591 upstream.
A while ago, when the "trace" file was opened, tracing was stopped, and
code was added to stop recording the comms to saved_cmdlines, for mapping
of the pids to the task name.
Code has been added that only records the comm if a trace event occurred,
and there's no reason to not trace it if the trace file is opened.
Cc: [email protected]
Fixes: 7ffbd48d5cab2 ("tracing: Cache comms only after an event occurred")
Signed-off-by: Steven Rostedt (VMware) <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
kernel/trace/trace.c | 9 ---------
1 file changed, 9 deletions(-)
--- a/kernel/trace/trace.c
+++ b/kernel/trace/trace.c
@@ -2195,9 +2195,6 @@ struct saved_cmdlines_buffer {
};
static struct saved_cmdlines_buffer *savedcmd;
-/* temporary disable recording */
-static atomic_t trace_record_taskinfo_disabled __read_mostly;
-
static inline char *get_saved_cmdlines(int idx)
{
return &savedcmd->saved_cmdlines[idx * TASK_COMM_LEN];
@@ -3683,9 +3680,6 @@ static void *s_start(struct seq_file *m,
return ERR_PTR(-EBUSY);
#endif
- if (!iter->snapshot)
- atomic_inc(&trace_record_taskinfo_disabled);
-
if (*pos != iter->pos) {
iter->ent = NULL;
iter->cpu = 0;
@@ -3728,9 +3722,6 @@ static void s_stop(struct seq_file *m, v
return;
#endif
- if (!iter->snapshot)
- atomic_dec(&trace_record_taskinfo_disabled);
-
trace_access_unlock(iter->cpu_file);
trace_event_read_unlock();
}
From: Steven Rostedt (VMware) <[email protected]>
commit 85550c83da421fb12dc1816c45012e1e638d2b38 upstream.
The saved_cmdlines is used to map pids to the task name, such that the
output of the tracing does not just show pids, but also gives a human
readable name for the task.
If the name is not mapped, the output looks like this:
<...>-1316 [005] ...2 132.044039: ...
Instead of this:
gnome-shell-1316 [005] ...2 132.044039: ...
The names are updated when tracing is running, but are skipped if tracing
is stopped. Unfortunately, this stops the recording of the names if the
top level tracer is stopped, and not if there's other tracers active.
The recording of a name only happens when a new event is written into a
ring buffer, so there is no need to test if tracing is on or not. If
tracing is off, then no event is written and no need to test if tracing is
off or not.
Remove the check, as it hides the names of tasks for events in the
instance buffers.
Cc: [email protected]
Fixes: 7ffbd48d5cab2 ("tracing: Cache comms only after an event occurred")
Signed-off-by: Steven Rostedt (VMware) <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
kernel/trace/trace.c | 2 --
1 file changed, 2 deletions(-)
--- a/kernel/trace/trace.c
+++ b/kernel/trace/trace.c
@@ -2483,8 +2483,6 @@ static bool tracing_record_taskinfo_skip
{
if (unlikely(!(flags & (TRACE_RECORD_CMDLINE | TRACE_RECORD_TGID))))
return true;
- if (atomic_read(&trace_record_taskinfo_disabled) || !tracing_is_on())
- return true;
if (!__this_cpu_read(trace_taskinfo_save))
return true;
return false;
From: Riwen Lu <[email protected]>
[ Upstream commit 78d13552346289bad4a9bf8eabb5eec5e5a321a5 ]
The scpi hwmon shows the sub-zero temperature in an unsigned integer,
which would confuse the users when the machine works in low temperature
environment. This shows the sub-zero temperature in an signed value and
users can get it properly from sensors.
Signed-off-by: Riwen Lu <[email protected]>
Tested-by: Xin Chen <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Guenter Roeck <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/hwmon/scpi-hwmon.c | 9 +++++++++
1 file changed, 9 insertions(+)
diff --git a/drivers/hwmon/scpi-hwmon.c b/drivers/hwmon/scpi-hwmon.c
index 25aac40f2764..919877970ae3 100644
--- a/drivers/hwmon/scpi-hwmon.c
+++ b/drivers/hwmon/scpi-hwmon.c
@@ -99,6 +99,15 @@ scpi_show_sensor(struct device *dev, struct device_attribute *attr, char *buf)
scpi_scale_reading(&value, sensor);
+ /*
+ * Temperature sensor values are treated as signed values based on
+ * observation even though that is not explicitly specified, and
+ * because an unsigned u64 temperature does not really make practical
+ * sense especially when the temperature is below zero degrees Celsius.
+ */
+ if (sensor->info.class == TEMPERATURE)
+ return sprintf(buf, "%lld\n", (s64)value);
+
return sprintf(buf, "%llu\n", value);
}
--
2.30.2
From: Vincent Guittot <[email protected]>
[ Upstream commit fcf6631f3736985ec89bdd76392d3c7bfb60119f ]
Rounding in PELT calculation happening when entities are attached/detached
of a cfs_rq can result into situations where util/runnable_avg is not null
but util/runnable_sum is. This is normally not possible so we need to
ensure that util/runnable_sum stays synced with util/runnable_avg.
detach_entity_load_avg() is the last place where we don't sync
util/runnable_sum with util/runnbale_avg when moving some sched_entities
Signed-off-by: Vincent Guittot <[email protected]>
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
kernel/sched/fair.c | 10 ++++++++--
1 file changed, 8 insertions(+), 2 deletions(-)
diff --git a/kernel/sched/fair.c b/kernel/sched/fair.c
index ff8a172a69ca..d6e1c90de570 100644
--- a/kernel/sched/fair.c
+++ b/kernel/sched/fair.c
@@ -3767,11 +3767,17 @@ static void attach_entity_load_avg(struct cfs_rq *cfs_rq, struct sched_entity *s
*/
static void detach_entity_load_avg(struct cfs_rq *cfs_rq, struct sched_entity *se)
{
+ /*
+ * cfs_rq->avg.period_contrib can be used for both cfs_rq and se.
+ * See ___update_load_avg() for details.
+ */
+ u32 divider = get_pelt_divider(&cfs_rq->avg);
+
dequeue_load_avg(cfs_rq, se);
sub_positive(&cfs_rq->avg.util_avg, se->avg.util_avg);
- sub_positive(&cfs_rq->avg.util_sum, se->avg.util_sum);
+ cfs_rq->avg.util_sum = cfs_rq->avg.util_avg * divider;
sub_positive(&cfs_rq->avg.runnable_avg, se->avg.runnable_avg);
- sub_positive(&cfs_rq->avg.runnable_sum, se->avg.runnable_sum);
+ cfs_rq->avg.runnable_sum = cfs_rq->avg.runnable_avg * divider;
add_tg_cfs_propagate(cfs_rq, -se->avg.load_sum);
--
2.30.2
From: Sean Christopherson <[email protected]>
commit 78fcb2c91adfec8ce3a2ba6b4d0dda89f2f4a7c6 upstream.
Immediately reset the MMU context when the vCPU's SMM flag is cleared so
that the SMM flag in the MMU role is always synchronized with the vCPU's
flag. If RSM fails (which isn't correctly emulated), KVM will bail
without calling post_leave_smm() and leave the MMU in a bad state.
The bad MMU role can lead to a NULL pointer dereference when grabbing a
shadow page's rmap for a page fault as the initial lookups for the gfn
will happen with the vCPU's SMM flag (=0), whereas the rmap lookup will
use the shadow page's SMM flag, which comes from the MMU (=1). SMM has
an entirely different set of memslots, and so the initial lookup can find
a memslot (SMM=0) and then explode on the rmap memslot lookup (SMM=1).
general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] PREEMPT SMP KASAN
KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
CPU: 1 PID: 8410 Comm: syz-executor382 Not tainted 5.13.0-rc5-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:__gfn_to_rmap arch/x86/kvm/mmu/mmu.c:935 [inline]
RIP: 0010:gfn_to_rmap+0x2b0/0x4d0 arch/x86/kvm/mmu/mmu.c:947
Code: <42> 80 3c 20 00 74 08 4c 89 ff e8 f1 79 a9 00 4c 89 fb 4d 8b 37 44
RSP: 0018:ffffc90000ffef98 EFLAGS: 00010246
RAX: 0000000000000000 RBX: ffff888015b9f414 RCX: ffff888019669c40
RDX: 0000000000000000 RSI: 0000000000000001 RDI: 0000000000000001
RBP: 0000000000000001 R08: ffffffff811d9cdb R09: ffffed10065a6002
R10: ffffed10065a6002 R11: 0000000000000000 R12: dffffc0000000000
R13: 0000000000000003 R14: 0000000000000001 R15: 0000000000000000
FS: 000000000124b300(0000) GS:ffff8880b9b00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000000 CR3: 0000000028e31000 CR4: 00000000001526e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
rmap_add arch/x86/kvm/mmu/mmu.c:965 [inline]
mmu_set_spte+0x862/0xe60 arch/x86/kvm/mmu/mmu.c:2604
__direct_map arch/x86/kvm/mmu/mmu.c:2862 [inline]
direct_page_fault+0x1f74/0x2b70 arch/x86/kvm/mmu/mmu.c:3769
kvm_mmu_do_page_fault arch/x86/kvm/mmu.h:124 [inline]
kvm_mmu_page_fault+0x199/0x1440 arch/x86/kvm/mmu/mmu.c:5065
vmx_handle_exit+0x26/0x160 arch/x86/kvm/vmx/vmx.c:6122
vcpu_enter_guest+0x3bdd/0x9630 arch/x86/kvm/x86.c:9428
vcpu_run+0x416/0xc20 arch/x86/kvm/x86.c:9494
kvm_arch_vcpu_ioctl_run+0x4e8/0xa40 arch/x86/kvm/x86.c:9722
kvm_vcpu_ioctl+0x70f/0xbb0 arch/x86/kvm/../../../virt/kvm/kvm_main.c:3460
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:1069 [inline]
__se_sys_ioctl+0xfb/0x170 fs/ioctl.c:1055
do_syscall_64+0x3f/0xb0 arch/x86/entry/common.c:47
entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x440ce9
Cc: [email protected]
Reported-by: [email protected]
Fixes: 9ec19493fb86 ("KVM: x86: clear SMM flags before loading state while leaving SMM")
Signed-off-by: Sean Christopherson <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/kvm/x86.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -6876,7 +6876,10 @@ static unsigned emulator_get_hflags(stru
static void emulator_set_hflags(struct x86_emulate_ctxt *ctxt, unsigned emul_flags)
{
- emul_to_vcpu(ctxt)->arch.hflags = emul_flags;
+ struct kvm_vcpu *vcpu = emul_to_vcpu(ctxt);
+
+ vcpu->arch.hflags = emul_flags;
+ kvm_mmu_reset_context(vcpu);
}
static int emulator_pre_leave_smm(struct x86_emulate_ctxt *ctxt,
From: Feng Tang <[email protected]>
[ Upstream commit 2e3025434a6ba090c85871a1d4080ff784109e1f ]
0day robot reported a 9.2% regression for will-it-scale mmap1 test
case[1], caused by commit 57efa1fe5957 ("mm/gup: prevent gup_fast from
racing with COW during fork").
Further debug shows the regression is due to that commit changes the
offset of hot fields 'mmap_lock' inside structure 'mm_struct', thus some
cache alignment changes.
>From the perf data, the contention for 'mmap_lock' is very severe and
takes around 95% cpu cycles, and it is a rw_semaphore
struct rw_semaphore {
atomic_long_t count; /* 8 bytes */
atomic_long_t owner; /* 8 bytes */
struct optimistic_spin_queue osq; /* spinner MCS lock */
...
Before commit 57efa1fe5957 adds the 'write_protect_seq', it happens to
have a very optimal cache alignment layout, as Linus explained:
"and before the addition of the 'write_protect_seq' field, the
mmap_sem was at offset 120 in 'struct mm_struct'.
Which meant that count and owner were in two different cachelines,
and then when you have contention and spend time in
rwsem_down_write_slowpath(), this is probably *exactly* the kind
of layout you want.
Because first the rwsem_write_trylock() will do a cmpxchg on the
first cacheline (for the optimistic fast-path), and then in the
case of contention, rwsem_down_write_slowpath() will just access
the second cacheline.
Which is probably just optimal for a load that spends a lot of
time contended - new waiters touch that first cacheline, and then
they queue themselves up on the second cacheline."
After the commit, the rw_semaphore is at offset 128, which means the
'count' and 'owner' fields are now in the same cacheline, and causes
more cache bouncing.
Currently there are 3 "#ifdef CONFIG_XXX" before 'mmap_lock' which will
affect its offset:
CONFIG_MMU
CONFIG_MEMBARRIER
CONFIG_HAVE_ARCH_COMPAT_MMAP_BASES
The layout above is on 64 bits system with 0day's default kernel config
(similar to RHEL-8.3's config), in which all these 3 options are 'y'.
And the layout can vary with different kernel configs.
Relayouting a structure is usually a double-edged sword, as sometimes it
can helps one case, but hurt other cases. For this case, one solution
is, as the newly added 'write_protect_seq' is a 4 bytes long seqcount_t
(when CONFIG_DEBUG_LOCK_ALLOC=n), placing it into an existing 4 bytes
hole in 'mm_struct' will not change other fields' alignment, while
restoring the regression.
Link: https://lore.kernel.org/lkml/20210525031636.GB7744@xsang-OptiPlex-9020/ [1]
Reported-by: kernel test robot <[email protected]>
Signed-off-by: Feng Tang <[email protected]>
Reviewed-by: John Hubbard <[email protected]>
Reviewed-by: Jason Gunthorpe <[email protected]>
Cc: Peter Xu <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
include/linux/mm_types.h | 27 ++++++++++++++++++++-------
1 file changed, 20 insertions(+), 7 deletions(-)
diff --git a/include/linux/mm_types.h b/include/linux/mm_types.h
index a4fff7d7abe5..4eb38918da8f 100644
--- a/include/linux/mm_types.h
+++ b/include/linux/mm_types.h
@@ -448,13 +448,6 @@ struct mm_struct {
*/
atomic_t has_pinned;
- /**
- * @write_protect_seq: Locked when any thread is write
- * protecting pages mapped by this mm to enforce a later COW,
- * for instance during page table copying for fork().
- */
- seqcount_t write_protect_seq;
-
#ifdef CONFIG_MMU
atomic_long_t pgtables_bytes; /* PTE page table pages */
#endif
@@ -463,6 +456,18 @@ struct mm_struct {
spinlock_t page_table_lock; /* Protects page tables and some
* counters
*/
+ /*
+ * With some kernel config, the current mmap_lock's offset
+ * inside 'mm_struct' is at 0x120, which is very optimal, as
+ * its two hot fields 'count' and 'owner' sit in 2 different
+ * cachelines, and when mmap_lock is highly contended, both
+ * of the 2 fields will be accessed frequently, current layout
+ * will help to reduce cache bouncing.
+ *
+ * So please be careful with adding new fields before
+ * mmap_lock, which can easily push the 2 fields into one
+ * cacheline.
+ */
struct rw_semaphore mmap_lock;
struct list_head mmlist; /* List of maybe swapped mm's. These
@@ -483,7 +488,15 @@ struct mm_struct {
unsigned long stack_vm; /* VM_STACK */
unsigned long def_flags;
+ /**
+ * @write_protect_seq: Locked when any thread is write
+ * protecting pages mapped by this mm to enforce a later COW,
+ * for instance during page table copying for fork().
+ */
+ seqcount_t write_protect_seq;
+
spinlock_t arg_lock; /* protect the below fields */
+
unsigned long start_code, end_code, start_data, end_data;
unsigned long start_brk, brk, start_stack;
unsigned long arg_start, arg_end, env_start, env_end;
--
2.30.2
From: Antti Järvinen <[email protected]>
commit b5cf198e74a91073d12839a3e2db99994a39995d upstream.
Some TI KeyStone C667X devices do not support bus/hot reset. The PCIESS
automatically disables LTSSM when Secondary Bus Reset is received and
device stops working. Prevent bus reset for these devices. With this
change, the device can be assigned to VMs with VFIO, but it will leak state
between VMs.
Reference: https://e2e.ti.com/support/processors/f/791/t/954382
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Antti Järvinen <[email protected]>
Signed-off-by: Bjorn Helgaas <[email protected]>
Reviewed-by: Kishon Vijay Abraham I <[email protected]>
Cc: [email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/pci/quirks.c | 10 ++++++++++
1 file changed, 10 insertions(+)
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -3577,6 +3577,16 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_A
*/
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_CAVIUM, 0xa100, quirk_no_bus_reset);
+/*
+ * Some TI KeyStone C667X devices do not support bus/hot reset. The PCIESS
+ * automatically disables LTSSM when Secondary Bus Reset is received and
+ * the device stops working. Prevent bus reset for these devices. With
+ * this change, the device can be assigned to VMs with VFIO, but it will
+ * leak state between VMs. Reference
+ * https://e2e.ti.com/support/processors/f/791/t/954382
+ */
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_TI, 0xb005, quirk_no_bus_reset);
+
static void quirk_no_pm_reset(struct pci_dev *dev)
{
/*
From: Sriharsha Basavapatna <[email protected]>
commit db2f77e2bd99dbd2fb23ddde58f0fae392fe3338 upstream.
The Broadcom BCM57414 NIC may be a multi-function device. While it does
not advertise an ACS capability, peer-to-peer transactions are not possible
between the individual functions, so it is safe to treat them as fully
isolated.
Add an ACS quirk for this device so the functions can be in independent
IOMMU groups and attached individually to userspace applications using
VFIO.
[bhelgaas: commit log]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sriharsha Basavapatna <[email protected]>
Signed-off-by: Michael Chan <[email protected]>
Signed-off-by: Bjorn Helgaas <[email protected]>
Cc: [email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/pci/quirks.c | 2 ++
1 file changed, 2 insertions(+)
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -4785,6 +4785,8 @@ static const struct pci_dev_acs_enabled
{ PCI_VENDOR_ID_AMPERE, 0xE00A, pci_quirk_xgene_acs },
{ PCI_VENDOR_ID_AMPERE, 0xE00B, pci_quirk_xgene_acs },
{ PCI_VENDOR_ID_AMPERE, 0xE00C, pci_quirk_xgene_acs },
+ /* Broadcom multi-function device */
+ { PCI_VENDOR_ID_BROADCOM, 0x16D7, pci_quirk_mf_endpoint_acs },
{ PCI_VENDOR_ID_BROADCOM, 0xD714, pci_quirk_brcm_acs },
/* Amazon Annapurna Labs */
{ PCI_VENDOR_ID_AMAZON_ANNAPURNA_LABS, 0x0031, pci_quirk_al_acs },
From: Patrice Chotard <[email protected]>
[ Upstream commit d38fa9a155b2829b7e2cfcf8a4171b6dd3672808 ]
In U-boot side, an issue has been encountered when QSPI source clock is
running at low frequency (24 MHz for example), waiting for TCF bit to be
set didn't ensure that all data has been send out the FIFO, we should also
wait that BUSY bit is cleared.
To prevent similar issue in kernel driver, we implement similar behavior
by always waiting BUSY bit to be cleared.
Signed-off-by: Patrice Chotard <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/spi/spi-stm32-qspi.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/drivers/spi/spi-stm32-qspi.c b/drivers/spi/spi-stm32-qspi.c
index 2786470a5201..4f24f6392212 100644
--- a/drivers/spi/spi-stm32-qspi.c
+++ b/drivers/spi/spi-stm32-qspi.c
@@ -293,7 +293,7 @@ static int stm32_qspi_wait_cmd(struct stm32_qspi *qspi,
int err = 0;
if (!op->data.nbytes)
- return stm32_qspi_wait_nobusy(qspi);
+ goto wait_nobusy;
if (readl_relaxed(qspi->io_base + QSPI_SR) & SR_TCF)
goto out;
@@ -314,6 +314,9 @@ static int stm32_qspi_wait_cmd(struct stm32_qspi *qspi,
out:
/* clear flags */
writel_relaxed(FCR_CTCF | FCR_CTEF, qspi->io_base + QSPI_FCR);
+wait_nobusy:
+ if (!err)
+ err = stm32_qspi_wait_nobusy(qspi);
return err;
}
--
2.30.2
From: Sean Christopherson <[email protected]>
commit 654430efde27248be563df9a88631204b5fe2df2 upstream.
Calculate and check the full mmu_role when initializing the MMU context
for the nested MMU, where "full" means the bits and pieces of the role
that aren't handled by kvm_calc_mmu_role_common(). While the nested MMU
isn't used for shadow paging, things like the number of levels in the
guest's page tables are surprisingly important when walking the guest
page tables. Failure to reinitialize the nested MMU context if L2's
paging mode changes can result in unexpected and/or missed page faults,
and likely other explosions.
E.g. if an L1 vCPU is running both a 32-bit PAE L2 and a 64-bit L2, the
"common" role calculation will yield the same role for both L2s. If the
64-bit L2 is run after the 32-bit PAE L2, L0 will fail to reinitialize
the nested MMU context, ultimately resulting in a bad walk of L2's page
tables as the MMU will still have a guest root_level of PT32E_ROOT_LEVEL.
WARNING: CPU: 4 PID: 167334 at arch/x86/kvm/vmx/vmx.c:3075 ept_save_pdptrs+0x15/0xe0 [kvm_intel]
Modules linked in: kvm_intel]
CPU: 4 PID: 167334 Comm: CPU 3/KVM Not tainted 5.13.0-rc1-d849817d5673-reqs #185
Hardware name: ASUS Q87M-E/Q87M-E, BIOS 1102 03/03/2014
RIP: 0010:ept_save_pdptrs+0x15/0xe0 [kvm_intel]
Code: <0f> 0b c3 f6 87 d8 02 00f
RSP: 0018:ffffbba702dbba00 EFLAGS: 00010202
RAX: 0000000000000011 RBX: 0000000000000002 RCX: ffffffff810a2c08
RDX: ffff91d7bc30acc0 RSI: 0000000000000011 RDI: ffff91d7bc30a600
RBP: ffff91d7bc30a600 R08: 0000000000000010 R09: 0000000000000007
R10: 0000000000000000 R11: 0000000000000000 R12: ffff91d7bc30a600
R13: ffff91d7bc30acc0 R14: ffff91d67c123460 R15: 0000000115d7e005
FS: 00007fe8e9ffb700(0000) GS:ffff91d90fb00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000000 CR3: 000000029f15a001 CR4: 00000000001726e0
Call Trace:
kvm_pdptr_read+0x3a/0x40 [kvm]
paging64_walk_addr_generic+0x327/0x6a0 [kvm]
paging64_gva_to_gpa_nested+0x3f/0xb0 [kvm]
kvm_fetch_guest_virt+0x4c/0xb0 [kvm]
__do_insn_fetch_bytes+0x11a/0x1f0 [kvm]
x86_decode_insn+0x787/0x1490 [kvm]
x86_decode_emulated_instruction+0x58/0x1e0 [kvm]
x86_emulate_instruction+0x122/0x4f0 [kvm]
vmx_handle_exit+0x120/0x660 [kvm_intel]
kvm_arch_vcpu_ioctl_run+0xe25/0x1cb0 [kvm]
kvm_vcpu_ioctl+0x211/0x5a0 [kvm]
__x64_sys_ioctl+0x83/0xb0
do_syscall_64+0x40/0xb0
entry_SYSCALL_64_after_hwframe+0x44/0xae
Cc: Vitaly Kuznetsov <[email protected]>
Cc: [email protected]
Fixes: bf627a928837 ("x86/kvm/mmu: check if MMU reconfiguration is needed in init_kvm_nested_mmu()")
Signed-off-by: Sean Christopherson <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/kvm/mmu/mmu.c | 26 +++++++++++++++++++++++++-
1 file changed, 25 insertions(+), 1 deletion(-)
--- a/arch/x86/kvm/mmu/mmu.c
+++ b/arch/x86/kvm/mmu/mmu.c
@@ -4705,9 +4705,33 @@ static void init_kvm_softmmu(struct kvm_
context->inject_page_fault = kvm_inject_page_fault;
}
+static union kvm_mmu_role kvm_calc_nested_mmu_role(struct kvm_vcpu *vcpu)
+{
+ union kvm_mmu_role role = kvm_calc_shadow_root_page_role_common(vcpu, false);
+
+ /*
+ * Nested MMUs are used only for walking L2's gva->gpa, they never have
+ * shadow pages of their own and so "direct" has no meaning. Set it
+ * to "true" to try to detect bogus usage of the nested MMU.
+ */
+ role.base.direct = true;
+
+ if (!is_paging(vcpu))
+ role.base.level = 0;
+ else if (is_long_mode(vcpu))
+ role.base.level = is_la57_mode(vcpu) ? PT64_ROOT_5LEVEL :
+ PT64_ROOT_4LEVEL;
+ else if (is_pae(vcpu))
+ role.base.level = PT32E_ROOT_LEVEL;
+ else
+ role.base.level = PT32_ROOT_LEVEL;
+
+ return role;
+}
+
static void init_kvm_nested_mmu(struct kvm_vcpu *vcpu)
{
- union kvm_mmu_role new_role = kvm_calc_mmu_role_common(vcpu, false);
+ union kvm_mmu_role new_role = kvm_calc_nested_mmu_role(vcpu);
struct kvm_mmu *g_context = &vcpu->arch.nested_mmu;
if (new_role.as_u64 == g_context->mmu_role.as_u64)
From: Steven Rostedt (VMware) <[email protected]>
commit 89529d8b8f8daf92d9979382b8d2eb39966846ea upstream.
The trace_clock_global() tries to make sure the events between CPUs is
somewhat in order. A global value is used and updated by the latest read
of a clock. If one CPU is ahead by a little, and is read by another CPU, a
lock is taken, and if the timestamp of the other CPU is behind, it will
simply use the other CPUs timestamp.
The lock is also only taken with a "trylock" due to tracing, and strange
recursions can happen. The lock is not taken at all in NMI context.
In the case where the lock is not able to be taken, the non synced
timestamp is returned. But it will not be less than the saved global
timestamp.
The problem arises because when the time goes "backwards" the time
returned is the saved timestamp plus 1. If the lock is not taken, and the
plus one to the timestamp is returned, there's a small race that can cause
the time to go backwards!
CPU0 CPU1
---- ----
trace_clock_global() {
ts = clock() [ 1000 ]
trylock(clock_lock) [ success ]
global_ts = ts; [ 1000 ]
<interrupted by NMI>
trace_clock_global() {
ts = clock() [ 999 ]
if (ts < global_ts)
ts = global_ts + 1 [ 1001 ]
trylock(clock_lock) [ fail ]
return ts [ 1001]
}
unlock(clock_lock);
return ts; [ 1000 ]
}
trace_clock_global() {
ts = clock() [ 1000 ]
if (ts < global_ts) [ false 1000 == 1000 ]
trylock(clock_lock) [ success ]
global_ts = ts; [ 1000 ]
unlock(clock_lock)
return ts; [ 1000 ]
}
The above case shows to reads of trace_clock_global() on the same CPU, but
the second read returns one less than the first read. That is, time when
backwards, and this is not what is allowed by trace_clock_global().
This was triggered by heavy tracing and the ring buffer checker that tests
for the clock going backwards:
Ring buffer clock went backwards: 20613921464 -> 20613921463
------------[ cut here ]------------
WARNING: CPU: 2 PID: 0 at kernel/trace/ring_buffer.c:3412 check_buffer+0x1b9/0x1c0
Modules linked in:
[..]
[CPU: 2]TIME DOES NOT MATCH expected:20620711698 actual:20620711697 delta:6790234 before:20613921463 after:20613921463
[20613915818] PAGE TIME STAMP
[20613915818] delta:0
[20613915819] delta:1
[20613916035] delta:216
[20613916465] delta:430
[20613916575] delta:110
[20613916749] delta:174
[20613917248] delta:499
[20613917333] delta:85
[20613917775] delta:442
[20613917921] delta:146
[20613918321] delta:400
[20613918568] delta:247
[20613918768] delta:200
[20613919306] delta:538
[20613919353] delta:47
[20613919980] delta:627
[20613920296] delta:316
[20613920571] delta:275
[20613920862] delta:291
[20613921152] delta:290
[20613921464] delta:312
[20613921464] delta:0 TIME EXTEND
[20613921464] delta:0
This happened more than once, and always for an off by one result. It also
started happening after commit aafe104aa9096 was added.
Cc: [email protected]
Fixes: aafe104aa9096 ("tracing: Restructure trace_clock_global() to never block")
Signed-off-by: Steven Rostedt (VMware) <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
kernel/trace/trace_clock.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
--- a/kernel/trace/trace_clock.c
+++ b/kernel/trace/trace_clock.c
@@ -115,9 +115,9 @@ u64 notrace trace_clock_global(void)
prev_time = READ_ONCE(trace_clock_struct.prev_time);
now = sched_clock_cpu(this_cpu);
- /* Make sure that now is always greater than prev_time */
+ /* Make sure that now is always greater than or equal to prev_time */
if ((s64)(now - prev_time) < 0)
- now = prev_time + 1;
+ now = prev_time;
/*
* If in an NMI context then dont risk lockups and simply return
@@ -131,7 +131,7 @@ u64 notrace trace_clock_global(void)
/* Reread prev_time in case it was already updated */
prev_time = READ_ONCE(trace_clock_struct.prev_time);
if ((s64)(now - prev_time) < 0)
- now = prev_time + 1;
+ now = prev_time;
trace_clock_struct.prev_time = now;
From: Harald Freudenberger <[email protected]>
commit e73a99f3287a740a07d6618e9470f4d6cb217da8 upstream.
When a AP queue is switched to soft offline, all pending
requests are purged out of the pending requests list and
'received' by the upper layer like zcrypt device drivers.
This is also done for requests which are already enqueued
into the firmware queue. A request in a firmware queue
may eventually produce an response message, but there is
no waiting process any more. However, the response was
counted with the queue_counter and as this counter was
reset to 0 with the offline switch, the pending response
caused the queue_counter to get negative. The next request
increased this counter to 0 (instead of 1) which caused
the ap code to assume there is nothing to receive and so
the response for this valid request was never tried to
fetch from the firmware queue.
This all caused a queue to not work properly after a
switch offline/online and in the end processes to hang
forever when trying to send a crypto request after an
queue offline/online switch cicle.
Fixed by a) making sure the counter does not drop below 0
and b) on a successful enqueue of a message has at least
a value of 1.
Additionally a warning is emitted, when a reply can't get
assigned to a waiting process. This may be normal operation
(process had timeout or has been killed) but may give a
hint that something unexpected happened (like this odd
behavior described above).
Signed-off-by: Harald Freudenberger <[email protected]>
Cc: [email protected]
Signed-off-by: Vasily Gorbik <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/s390/crypto/ap_queue.c | 11 +++++++++--
1 file changed, 9 insertions(+), 2 deletions(-)
--- a/drivers/s390/crypto/ap_queue.c
+++ b/drivers/s390/crypto/ap_queue.c
@@ -135,12 +135,13 @@ static struct ap_queue_status ap_sm_recv
{
struct ap_queue_status status;
struct ap_message *ap_msg;
+ bool found = false;
status = ap_dqap(aq->qid, &aq->reply->psmid,
aq->reply->msg, aq->reply->len);
switch (status.response_code) {
case AP_RESPONSE_NORMAL:
- aq->queue_count--;
+ aq->queue_count = max_t(int, 0, aq->queue_count - 1);
if (aq->queue_count > 0)
mod_timer(&aq->timeout,
jiffies + aq->request_timeout);
@@ -150,8 +151,14 @@ static struct ap_queue_status ap_sm_recv
list_del_init(&ap_msg->list);
aq->pendingq_count--;
ap_msg->receive(aq, ap_msg, aq->reply);
+ found = true;
break;
}
+ if (!found) {
+ AP_DBF_WARN("%s unassociated reply psmid=0x%016llx on 0x%02x.%04x\n",
+ __func__, aq->reply->psmid,
+ AP_QID_CARD(aq->qid), AP_QID_QUEUE(aq->qid));
+ }
fallthrough;
case AP_RESPONSE_NO_PENDING_REPLY:
if (!status.queue_empty || aq->queue_count <= 0)
@@ -232,7 +239,7 @@ static enum ap_sm_wait ap_sm_write(struc
ap_msg->flags & AP_MSG_FLAG_SPECIAL);
switch (status.response_code) {
case AP_RESPONSE_NORMAL:
- aq->queue_count++;
+ aq->queue_count = max_t(int, 1, aq->queue_count + 1);
if (aq->queue_count == 1)
mod_timer(&aq->timeout, jiffies + aq->request_timeout);
list_move_tail(&ap_msg->list, &aq->pendingq);
From: Chiqijun <[email protected]>
commit ce00322c2365e1f7b0312f2f493539c833465d97 upstream.
pcie_flr() starts a Function Level Reset (FLR), waits 100ms (the maximum
time allowed for FLR completion by PCIe r5.0, sec 6.6.2), and waits for the
FLR to complete. It assumes the FLR is complete when a config read returns
valid data.
When we do an FLR on several Huawei Intelligent NIC VFs at the same time,
firmware on the NIC processes them serially. The VF may respond to config
reads before the firmware has completed its reset processing. If we bind a
driver to the VF (e.g., by assigning the VF to a virtual machine) in the
interval between the successful config read and completion of the firmware
reset processing, the NIC VF driver may fail to load.
Prevent this driver failure by waiting for the NIC firmware to complete its
reset processing. Not all NIC firmware supports this feature.
[bhelgaas: commit log]
Link: https://support.huawei.com/enterprise/en/doc/EDOC1100063073/87950645/vm-oss-occasionally-fail-to-load-the-in200-driver-when-the-vf-performs-flr
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Chiqijun <[email protected]>
Signed-off-by: Bjorn Helgaas <[email protected]>
Reviewed-by: Alex Williamson <[email protected]>
Cc: [email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/pci/quirks.c | 65 +++++++++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 65 insertions(+)
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -3934,6 +3934,69 @@ static int delay_250ms_after_flr(struct
return 0;
}
+#define PCI_DEVICE_ID_HINIC_VF 0x375E
+#define HINIC_VF_FLR_TYPE 0x1000
+#define HINIC_VF_FLR_CAP_BIT (1UL << 30)
+#define HINIC_VF_OP 0xE80
+#define HINIC_VF_FLR_PROC_BIT (1UL << 18)
+#define HINIC_OPERATION_TIMEOUT 15000 /* 15 seconds */
+
+/* Device-specific reset method for Huawei Intelligent NIC virtual functions */
+static int reset_hinic_vf_dev(struct pci_dev *pdev, int probe)
+{
+ unsigned long timeout;
+ void __iomem *bar;
+ u32 val;
+
+ if (probe)
+ return 0;
+
+ bar = pci_iomap(pdev, 0, 0);
+ if (!bar)
+ return -ENOTTY;
+
+ /* Get and check firmware capabilities */
+ val = ioread32be(bar + HINIC_VF_FLR_TYPE);
+ if (!(val & HINIC_VF_FLR_CAP_BIT)) {
+ pci_iounmap(pdev, bar);
+ return -ENOTTY;
+ }
+
+ /* Set HINIC_VF_FLR_PROC_BIT for the start of FLR */
+ val = ioread32be(bar + HINIC_VF_OP);
+ val = val | HINIC_VF_FLR_PROC_BIT;
+ iowrite32be(val, bar + HINIC_VF_OP);
+
+ pcie_flr(pdev);
+
+ /*
+ * The device must recapture its Bus and Device Numbers after FLR
+ * in order generate Completions. Issue a config write to let the
+ * device capture this information.
+ */
+ pci_write_config_word(pdev, PCI_VENDOR_ID, 0);
+
+ /* Firmware clears HINIC_VF_FLR_PROC_BIT when reset is complete */
+ timeout = jiffies + msecs_to_jiffies(HINIC_OPERATION_TIMEOUT);
+ do {
+ val = ioread32be(bar + HINIC_VF_OP);
+ if (!(val & HINIC_VF_FLR_PROC_BIT))
+ goto reset_complete;
+ msleep(20);
+ } while (time_before(jiffies, timeout));
+
+ val = ioread32be(bar + HINIC_VF_OP);
+ if (!(val & HINIC_VF_FLR_PROC_BIT))
+ goto reset_complete;
+
+ pci_warn(pdev, "Reset dev timeout, FLR ack reg: %#010x\n", val);
+
+reset_complete:
+ pci_iounmap(pdev, bar);
+
+ return 0;
+}
+
static const struct pci_dev_reset_methods pci_dev_reset_methods[] = {
{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82599_SFP_VF,
reset_intel_82599_sfp_virtfn },
@@ -3945,6 +4008,8 @@ static const struct pci_dev_reset_method
{ PCI_VENDOR_ID_INTEL, 0x0953, delay_250ms_after_flr },
{ PCI_VENDOR_ID_CHELSIO, PCI_ANY_ID,
reset_chelsio_generic_dev },
+ { PCI_VENDOR_ID_HUAWEI, PCI_DEVICE_ID_HINIC_VF,
+ reset_hinic_vf_dev },
{ 0 }
};
From: Axel Lin <[email protected]>
[ Upstream commit cb2381cbecb81a8893b2d1e1af29bc2e5531df27 ]
devm_gpiod_get_array_optional may return NULL if no GPIO was assigned.
Signed-off-by: Axel Lin <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/regulator/rt4801-regulator.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/regulator/rt4801-regulator.c b/drivers/regulator/rt4801-regulator.c
index 2055a9cb13ba..7a87788d3f09 100644
--- a/drivers/regulator/rt4801-regulator.c
+++ b/drivers/regulator/rt4801-regulator.c
@@ -66,7 +66,7 @@ static int rt4801_enable(struct regulator_dev *rdev)
struct gpio_descs *gpios = priv->enable_gpios;
int id = rdev_get_id(rdev), ret;
- if (gpios->ndescs <= id) {
+ if (!gpios || gpios->ndescs <= id) {
dev_warn(&rdev->dev, "no dedicated gpio can control\n");
goto bypass_gpio;
}
@@ -88,7 +88,7 @@ static int rt4801_disable(struct regulator_dev *rdev)
struct gpio_descs *gpios = priv->enable_gpios;
int id = rdev_get_id(rdev);
- if (gpios->ndescs <= id) {
+ if (!gpios || gpios->ndescs <= id) {
dev_warn(&rdev->dev, "no dedicated gpio can control\n");
goto bypass_gpio;
}
--
2.30.2
From: Tiezhu Yang <[email protected]>
[ Upstream commit aaac9a1bd370338ce372669eb9a6059d16b929aa ]
Use clk_disable_unprepare() in the error path of mtk_phy_init() to fix
some resource leaks.
Reported-by: kernel test robot <[email protected]>
Reported-by: Dan Carpenter <[email protected]>
Signed-off-by: Tiezhu Yang <[email protected]>
Reviewed-by: Chunfeng Yun <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Vinod Koul <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/phy/mediatek/phy-mtk-tphy.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/phy/mediatek/phy-mtk-tphy.c b/drivers/phy/mediatek/phy-mtk-tphy.c
index cdbcc49f7115..731c483a04de 100644
--- a/drivers/phy/mediatek/phy-mtk-tphy.c
+++ b/drivers/phy/mediatek/phy-mtk-tphy.c
@@ -949,6 +949,8 @@ static int mtk_phy_init(struct phy *phy)
break;
default:
dev_err(tphy->dev, "incompatible PHY type\n");
+ clk_disable_unprepare(instance->ref_clk);
+ clk_disable_unprepare(instance->da_ref_clk);
return -EINVAL;
}
--
2.30.2
From: Mathy Vanhoef <[email protected]>
commit bddc0c411a45d3718ac535a070f349be8eca8d48 upstream.
The commit cb17ed29a7a5 ("mac80211: parse radiotap header when selecting Tx
queue") moved the code to validate the radiotap header from
ieee80211_monitor_start_xmit to ieee80211_parse_tx_radiotap. This made is
possible to share more code with the new Tx queue selection code for
injected frames. But at the same time, it now required the call of
ieee80211_parse_tx_radiotap at the beginning of functions which wanted to
handle the radiotap header. And this broke the rate parser for radiotap
header parser.
The radiotap parser for rates is operating most of the time only on the
data in the actual radiotap header. But for the 802.11a/b/g rates, it must
also know the selected band from the chandef information. But this
information is only written to the ieee80211_tx_info at the end of the
ieee80211_monitor_start_xmit - long after ieee80211_parse_tx_radiotap was
already called. The info->band information was therefore always 0
(NL80211_BAND_2GHZ) when the parser code tried to access it.
For a 5GHz only device, injecting a frame with 802.11a rates would cause a
NULL pointer dereference because local->hw.wiphy->bands[NL80211_BAND_2GHZ]
would most likely have been NULL when the radiotap parser searched for the
correct rate index of the driver.
Cc: [email protected]
Reported-by: Ben Greear <[email protected]>
Fixes: cb17ed29a7a5 ("mac80211: parse radiotap header when selecting Tx queue")
Signed-off-by: Mathy Vanhoef <[email protected]>
[[email protected]: added commit message]
Signed-off-by: Sven Eckelmann <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Johannes Berg <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
include/net/mac80211.h | 7 +++++-
net/mac80211/tx.c | 52 +++++++++++++++++++++++++++++++++----------------
2 files changed, 42 insertions(+), 17 deletions(-)
--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
@@ -6335,7 +6335,12 @@ bool ieee80211_tx_prepare_skb(struct iee
/**
* ieee80211_parse_tx_radiotap - Sanity-check and parse the radiotap header
- * of injected frames
+ * of injected frames.
+ *
+ * To accurately parse and take into account rate and retransmission fields,
+ * you must initialize the chandef field in the ieee80211_tx_info structure
+ * of the skb before calling this function.
+ *
* @skb: packet injected by userspace
* @dev: the &struct device of this 802.11 device
*/
--- a/net/mac80211/tx.c
+++ b/net/mac80211/tx.c
@@ -2030,6 +2030,26 @@ void ieee80211_xmit(struct ieee80211_sub
ieee80211_tx(sdata, sta, skb, false);
}
+static bool ieee80211_validate_radiotap_len(struct sk_buff *skb)
+{
+ struct ieee80211_radiotap_header *rthdr =
+ (struct ieee80211_radiotap_header *)skb->data;
+
+ /* check for not even having the fixed radiotap header part */
+ if (unlikely(skb->len < sizeof(struct ieee80211_radiotap_header)))
+ return false; /* too short to be possibly valid */
+
+ /* is it a header version we can trust to find length from? */
+ if (unlikely(rthdr->it_version))
+ return false; /* only version 0 is supported */
+
+ /* does the skb contain enough to deliver on the alleged length? */
+ if (unlikely(skb->len < ieee80211_get_radiotap_len(skb->data)))
+ return false; /* skb too short for claimed rt header extent */
+
+ return true;
+}
+
bool ieee80211_parse_tx_radiotap(struct sk_buff *skb,
struct net_device *dev)
{
@@ -2038,8 +2058,6 @@ bool ieee80211_parse_tx_radiotap(struct
struct ieee80211_radiotap_header *rthdr =
(struct ieee80211_radiotap_header *) skb->data;
struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
- struct ieee80211_supported_band *sband =
- local->hw.wiphy->bands[info->band];
int ret = ieee80211_radiotap_iterator_init(&iterator, rthdr, skb->len,
NULL);
u16 txflags;
@@ -2052,17 +2070,8 @@ bool ieee80211_parse_tx_radiotap(struct
u8 vht_mcs = 0, vht_nss = 0;
int i;
- /* check for not even having the fixed radiotap header part */
- if (unlikely(skb->len < sizeof(struct ieee80211_radiotap_header)))
- return false; /* too short to be possibly valid */
-
- /* is it a header version we can trust to find length from? */
- if (unlikely(rthdr->it_version))
- return false; /* only version 0 is supported */
-
- /* does the skb contain enough to deliver on the alleged length? */
- if (unlikely(skb->len < ieee80211_get_radiotap_len(skb->data)))
- return false; /* skb too short for claimed rt header extent */
+ if (!ieee80211_validate_radiotap_len(skb))
+ return false;
info->flags |= IEEE80211_TX_INTFL_DONT_ENCRYPT |
IEEE80211_TX_CTL_DONTFRAG;
@@ -2186,6 +2195,9 @@ bool ieee80211_parse_tx_radiotap(struct
return false;
if (rate_found) {
+ struct ieee80211_supported_band *sband =
+ local->hw.wiphy->bands[info->band];
+
info->control.flags |= IEEE80211_TX_CTRL_RATE_INJECT;
for (i = 0; i < IEEE80211_TX_MAX_RATES; i++) {
@@ -2199,7 +2211,7 @@ bool ieee80211_parse_tx_radiotap(struct
} else if (rate_flags & IEEE80211_TX_RC_VHT_MCS) {
ieee80211_rate_set_vht(info->control.rates, vht_mcs,
vht_nss);
- } else {
+ } else if (sband) {
for (i = 0; i < sband->n_bitrates; i++) {
if (rate * 5 != sband->bitrates[i].bitrate)
continue;
@@ -2236,8 +2248,8 @@ netdev_tx_t ieee80211_monitor_start_xmit
info->flags = IEEE80211_TX_CTL_REQ_TX_STATUS |
IEEE80211_TX_CTL_INJECTED;
- /* Sanity-check and process the injection radiotap header */
- if (!ieee80211_parse_tx_radiotap(skb, dev))
+ /* Sanity-check the length of the radiotap header */
+ if (!ieee80211_validate_radiotap_len(skb))
goto fail;
/* we now know there is a radiotap header with a length we can use */
@@ -2353,6 +2365,14 @@ netdev_tx_t ieee80211_monitor_start_xmit
info->band = chandef->chan->band;
+ /*
+ * Process the radiotap header. This will now take into account the
+ * selected chandef above to accurately set injection rates and
+ * retransmissions.
+ */
+ if (!ieee80211_parse_tx_radiotap(skb, dev))
+ goto fail_rcu;
+
/* remove the injection radiotap header */
skb_pull(skb, len_rthdr);
From: Yifan Zhang <[email protected]>
commit 1c0b0efd148d5b24c4932ddb3fa03c8edd6097b3 upstream.
If GC has entered CGPG, ringing doorbell > first page doesn't wakeup GC.
Enlarge CP_MEC_DOORBELL_RANGE_UPPER to workaround this issue.
Signed-off-by: Yifan Zhang <[email protected]>
Reviewed-by: Felix Kuehling <[email protected]>
Reviewed-by: Alex Deucher <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
Cc: [email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
--- a/drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c
+++ b/drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c
@@ -6590,8 +6590,12 @@ static int gfx_v10_0_kiq_init_register(s
if (ring->use_doorbell) {
WREG32_SOC15(GC, 0, mmCP_MEC_DOORBELL_RANGE_LOWER,
(adev->doorbell_index.kiq * 2) << 2);
+ /* If GC has entered CGPG, ringing doorbell > first page doesn't
+ * wakeup GC. Enlarge CP_MEC_DOORBELL_RANGE_UPPER to workaround
+ * this issue.
+ */
WREG32_SOC15(GC, 0, mmCP_MEC_DOORBELL_RANGE_UPPER,
- (adev->doorbell_index.userqueue_end * 2) << 2);
+ (adev->doorbell.size - 4));
}
WREG32_SOC15(GC, 0, mmCP_HQD_PQ_DOORBELL_CONTROL,
From: Yifan Zhang <[email protected]>
commit 4cbbe34807938e6e494e535a68d5ff64edac3f20 upstream.
If GC has entered CGPG, ringing doorbell > first page doesn't wakeup GC.
Enlarge CP_MEC_DOORBELL_RANGE_UPPER to workaround this issue.
Signed-off-by: Yifan Zhang <[email protected]>
Reviewed-by: Felix Kuehling <[email protected]>
Reviewed-by: Alex Deucher <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
Cc: [email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
--- a/drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c
+++ b/drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c
@@ -3619,8 +3619,12 @@ static int gfx_v9_0_kiq_init_register(st
if (ring->use_doorbell) {
WREG32_SOC15(GC, 0, mmCP_MEC_DOORBELL_RANGE_LOWER,
(adev->doorbell_index.kiq * 2) << 2);
+ /* If GC has entered CGPG, ringing doorbell > first page doesn't
+ * wakeup GC. Enlarge CP_MEC_DOORBELL_RANGE_UPPER to workaround
+ * this issue.
+ */
WREG32_SOC15(GC, 0, mmCP_MEC_DOORBELL_RANGE_UPPER,
- (adev->doorbell_index.userqueue_end * 2) << 2);
+ (adev->doorbell.size - 4));
}
WREG32_SOC15_RLC(GC, 0, mmCP_HQD_PQ_DOORBELL_CONTROL,
From: Breno Lima <[email protected]>
commit c6d580d96f140596d69220f60ce0cfbea4ee5c0f upstream.
i.MX8MM cannot detect certain CDP USB HUBs. usbmisc_imx.c driver is not
following CDP timing requirements defined by USB BC 1.2 specification
and section 3.2.4 Detection Timing CDP.
During Primary Detection the i.MX device should turn on VDP_SRC and
IDM_SINK for a minimum of 40ms (TVDPSRC_ON). After a time of TVDPSRC_ON,
the i.MX is allowed to check the status of the D- line. Current
implementation is waiting between 1ms and 2ms, and certain BC 1.2
complaint USB HUBs cannot be detected. Increase delay to 40ms allowing
enough time for primary detection.
During secondary detection the i.MX is required to disable VDP_SRC and
IDM_SNK, and enable VDM_SRC and IDP_SINK for at least 40ms (TVDMSRC_ON).
Current implementation is not disabling VDP_SRC and IDM_SNK, introduce
disable sequence in imx7d_charger_secondary_detection() function.
VDM_SRC and IDP_SINK should be enabled for at least 40ms (TVDMSRC_ON).
Increase delay allowing enough time for detection.
Cc: <[email protected]>
Fixes: 746f316b753a ("usb: chipidea: introduce imx7d USB charger detection")
Signed-off-by: Breno Lima <[email protected]>
Signed-off-by: Jun Li <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Peter Chen <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/chipidea/usbmisc_imx.c | 16 ++++++++++++++--
1 file changed, 14 insertions(+), 2 deletions(-)
--- a/drivers/usb/chipidea/usbmisc_imx.c
+++ b/drivers/usb/chipidea/usbmisc_imx.c
@@ -686,6 +686,16 @@ static int imx7d_charger_secondary_detec
int val;
unsigned long flags;
+ /* Clear VDATSRCENB0 to disable VDP_SRC and IDM_SNK required by BC 1.2 spec */
+ spin_lock_irqsave(&usbmisc->lock, flags);
+ val = readl(usbmisc->base + MX7D_USB_OTG_PHY_CFG2);
+ val &= ~MX7D_USB_OTG_PHY_CFG2_CHRG_VDATSRCENB0;
+ writel(val, usbmisc->base + MX7D_USB_OTG_PHY_CFG2);
+ spin_unlock_irqrestore(&usbmisc->lock, flags);
+
+ /* TVDMSRC_DIS */
+ msleep(20);
+
/* VDM_SRC is connected to D- and IDP_SINK is connected to D+ */
spin_lock_irqsave(&usbmisc->lock, flags);
val = readl(usbmisc->base + MX7D_USB_OTG_PHY_CFG2);
@@ -695,7 +705,8 @@ static int imx7d_charger_secondary_detec
usbmisc->base + MX7D_USB_OTG_PHY_CFG2);
spin_unlock_irqrestore(&usbmisc->lock, flags);
- usleep_range(1000, 2000);
+ /* TVDMSRC_ON */
+ msleep(40);
/*
* Per BC 1.2, check voltage of D+:
@@ -798,7 +809,8 @@ static int imx7d_charger_primary_detecti
usbmisc->base + MX7D_USB_OTG_PHY_CFG2);
spin_unlock_irqrestore(&usbmisc->lock, flags);
- usleep_range(1000, 2000);
+ /* TVDPSRC_ON */
+ msleep(40);
/* Check if D- is less than VDAT_REF to determine an SDP per BC 1.2 */
val = readl(usbmisc->base + MX7D_USB_OTG_PHY_STATUS);
From: Bumyong Lee <[email protected]>
commit 4ad5dd2d7876d79507a20f026507d1a93b8fff10 upstream.
flags varible which is the input parameter of pl330_prep_dma_cyclic()
should not be used by spinlock_irq[save/restore] function.
Signed-off-by: Jongho Park <[email protected]>
Signed-off-by: Bumyong Lee <[email protected]>
Signed-off-by: Chanho Park <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Fixes: f6f2421c0a1c ("dmaengine: pl330: Merge dma_pl330_dmac and pl330_dmac structs")
Cc: [email protected]
Signed-off-by: Vinod Koul <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/dma/pl330.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
--- a/drivers/dma/pl330.c
+++ b/drivers/dma/pl330.c
@@ -2696,13 +2696,15 @@ static struct dma_async_tx_descriptor *p
for (i = 0; i < len / period_len; i++) {
desc = pl330_get_desc(pch);
if (!desc) {
+ unsigned long iflags;
+
dev_err(pch->dmac->ddma.dev, "%s:%d Unable to fetch desc\n",
__func__, __LINE__);
if (!first)
return NULL;
- spin_lock_irqsave(&pl330->pool_lock, flags);
+ spin_lock_irqsave(&pl330->pool_lock, iflags);
while (!list_empty(&first->node)) {
desc = list_entry(first->node.next,
@@ -2712,7 +2714,7 @@ static struct dma_async_tx_descriptor *p
list_move_tail(&first->node, &pl330->desc_pool);
- spin_unlock_irqrestore(&pl330->pool_lock, flags);
+ spin_unlock_irqrestore(&pl330->pool_lock, iflags);
return NULL;
}
From: Esben Haabendal <[email protected]>
commit c364df2489b8ef2f5e3159b1dff1ff1fdb16040d upstream.
Just as the initial check, we need to ensure num_frag+1 buffers available,
as that is the number of buffers we are going to use.
This fixes a buffer overflow, which might be seen during heavy network
load. Complete lockup of TEMAC was reproducible within about 10 minutes of
a particular load.
Fixes: 84823ff80f74 ("net: ll_temac: Fix race condition causing TX hang")
Cc: [email protected] # v5.4+
Signed-off-by: Esben Haabendal <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/xilinx/ll_temac_main.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/net/ethernet/xilinx/ll_temac_main.c
+++ b/drivers/net/ethernet/xilinx/ll_temac_main.c
@@ -849,7 +849,7 @@ temac_start_xmit(struct sk_buff *skb, st
smp_mb();
/* Space might have just been freed - check again */
- if (temac_check_tx_bd_space(lp, num_frag))
+ if (temac_check_tx_bd_space(lp, num_frag + 1))
return NETDEV_TX_BUSY;
netif_wake_queue(ndev);
From: Esben Haabendal <[email protected]>
commit 6aa32217a9a446275440ee8724b1ecaf1838df47 upstream.
With the skb pointer piggy-backed on the TX BD, we have a simple and
efficient way to free the skb buffer when the frame has been transmitted.
But in order to avoid freeing the skb while there are still fragments from
the skb in use, we need to piggy-back on the TX BD of the skb, not the
first.
Without this, we are doing use-after-free on the DMA side, when the first
BD of a multi TX BD packet is seen as completed in xmit_done, and the
remaining BDs are still being processed.
Cc: [email protected] # v5.4+
Signed-off-by: Esben Haabendal <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/xilinx/ll_temac_main.c | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
--- a/drivers/net/ethernet/xilinx/ll_temac_main.c
+++ b/drivers/net/ethernet/xilinx/ll_temac_main.c
@@ -876,7 +876,6 @@ temac_start_xmit(struct sk_buff *skb, st
return NETDEV_TX_OK;
}
cur_p->phys = cpu_to_be32(skb_dma_addr);
- ptr_to_txbd((void *)skb, cur_p);
for (ii = 0; ii < num_frag; ii++) {
if (++lp->tx_bd_tail >= lp->tx_bd_num)
@@ -915,6 +914,11 @@ temac_start_xmit(struct sk_buff *skb, st
}
cur_p->app0 |= cpu_to_be32(STS_CTRL_APP0_EOP);
+ /* Mark last fragment with skb address, so it can be consumed
+ * in temac_start_xmit_done()
+ */
+ ptr_to_txbd((void *)skb, cur_p);
+
tail_p = lp->tx_bd_p + sizeof(*lp->tx_bd_v) * lp->tx_bd_tail;
lp->tx_bd_tail++;
if (lp->tx_bd_tail >= lp->tx_bd_num)
From: Nikolay Aleksandrov <[email protected]>
commit 58e2071742e38f29f051b709a5cca014ba51166f upstream.
This patch fixes a tunnel_dst null pointer dereference due to lockless
access in the tunnel egress path. When deleting a vlan tunnel the
tunnel_dst pointer is set to NULL without waiting a grace period (i.e.
while it's still usable) and packets egressing are dereferencing it
without checking. Use READ/WRITE_ONCE to annotate the lockless use of
tunnel_id, use RCU for accessing tunnel_dst and make sure it is read
only once and checked in the egress path. The dst is already properly RCU
protected so we don't need to do anything fancy than to make sure
tunnel_id and tunnel_dst are read only once and checked in the egress path.
Cc: [email protected]
Fixes: 11538d039ac6 ("bridge: vlan dst_metadata hooks in ingress and egress paths")
Signed-off-by: Nikolay Aleksandrov <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/bridge/br_private.h | 4 ++--
net/bridge/br_vlan_tunnel.c | 38 ++++++++++++++++++++++++--------------
2 files changed, 26 insertions(+), 16 deletions(-)
--- a/net/bridge/br_private.h
+++ b/net/bridge/br_private.h
@@ -98,8 +98,8 @@ struct br_vlan_stats {
};
struct br_tunnel_info {
- __be64 tunnel_id;
- struct metadata_dst *tunnel_dst;
+ __be64 tunnel_id;
+ struct metadata_dst __rcu *tunnel_dst;
};
/* private vlan flags */
--- a/net/bridge/br_vlan_tunnel.c
+++ b/net/bridge/br_vlan_tunnel.c
@@ -41,26 +41,33 @@ static struct net_bridge_vlan *br_vlan_t
br_vlan_tunnel_rht_params);
}
+static void vlan_tunnel_info_release(struct net_bridge_vlan *vlan)
+{
+ struct metadata_dst *tdst = rtnl_dereference(vlan->tinfo.tunnel_dst);
+
+ WRITE_ONCE(vlan->tinfo.tunnel_id, 0);
+ RCU_INIT_POINTER(vlan->tinfo.tunnel_dst, NULL);
+ dst_release(&tdst->dst);
+}
+
void vlan_tunnel_info_del(struct net_bridge_vlan_group *vg,
struct net_bridge_vlan *vlan)
{
- if (!vlan->tinfo.tunnel_dst)
+ if (!rcu_access_pointer(vlan->tinfo.tunnel_dst))
return;
rhashtable_remove_fast(&vg->tunnel_hash, &vlan->tnode,
br_vlan_tunnel_rht_params);
- vlan->tinfo.tunnel_id = 0;
- dst_release(&vlan->tinfo.tunnel_dst->dst);
- vlan->tinfo.tunnel_dst = NULL;
+ vlan_tunnel_info_release(vlan);
}
static int __vlan_tunnel_info_add(struct net_bridge_vlan_group *vg,
struct net_bridge_vlan *vlan, u32 tun_id)
{
- struct metadata_dst *metadata = NULL;
+ struct metadata_dst *metadata = rtnl_dereference(vlan->tinfo.tunnel_dst);
__be64 key = key32_to_tunnel_id(cpu_to_be32(tun_id));
int err;
- if (vlan->tinfo.tunnel_dst)
+ if (metadata)
return -EEXIST;
metadata = __ip_tun_set_dst(0, 0, 0, 0, 0, TUNNEL_KEY,
@@ -69,8 +76,8 @@ static int __vlan_tunnel_info_add(struct
return -EINVAL;
metadata->u.tun_info.mode |= IP_TUNNEL_INFO_TX | IP_TUNNEL_INFO_BRIDGE;
- vlan->tinfo.tunnel_dst = metadata;
- vlan->tinfo.tunnel_id = key;
+ rcu_assign_pointer(vlan->tinfo.tunnel_dst, metadata);
+ WRITE_ONCE(vlan->tinfo.tunnel_id, key);
err = rhashtable_lookup_insert_fast(&vg->tunnel_hash, &vlan->tnode,
br_vlan_tunnel_rht_params);
@@ -79,9 +86,7 @@ static int __vlan_tunnel_info_add(struct
return 0;
out:
- dst_release(&vlan->tinfo.tunnel_dst->dst);
- vlan->tinfo.tunnel_dst = NULL;
- vlan->tinfo.tunnel_id = 0;
+ vlan_tunnel_info_release(vlan);
return err;
}
@@ -182,12 +187,15 @@ int br_handle_ingress_vlan_tunnel(struct
int br_handle_egress_vlan_tunnel(struct sk_buff *skb,
struct net_bridge_vlan *vlan)
{
+ struct metadata_dst *tunnel_dst;
+ __be64 tunnel_id;
int err;
- if (!vlan || !vlan->tinfo.tunnel_id)
+ if (!vlan)
return 0;
- if (unlikely(!skb_vlan_tag_present(skb)))
+ tunnel_id = READ_ONCE(vlan->tinfo.tunnel_id);
+ if (!tunnel_id || unlikely(!skb_vlan_tag_present(skb)))
return 0;
skb_dst_drop(skb);
@@ -195,7 +203,9 @@ int br_handle_egress_vlan_tunnel(struct
if (err)
return err;
- skb_dst_set(skb, dst_clone(&vlan->tinfo.tunnel_dst->dst));
+ tunnel_dst = rcu_dereference(vlan->tinfo.tunnel_dst);
+ if (tunnel_dst)
+ skb_dst_set(skb, dst_clone(&tunnel_dst->dst));
return 0;
}
From: Shanker Donthineni <[email protected]>
commit 4c207e7121fa92b66bf1896bf8ccb9edfb0f9731 upstream.
Some NVIDIA GPU devices do not work with SBR. Triggering SBR leaves the
device inoperable for the current system boot. It requires a system
hard-reboot to get the GPU device back to normal operating condition
post-SBR. For the affected devices, enable NO_BUS_RESET quirk to avoid the
issue.
This issue will be fixed in the next generation of hardware.
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Shanker Donthineni <[email protected]>
Signed-off-by: Bjorn Helgaas <[email protected]>
Reviewed-by: Sinan Kaya <[email protected]>
Cc: [email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/pci/quirks.c | 12 ++++++++++++
1 file changed, 12 insertions(+)
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -3558,6 +3558,18 @@ static void quirk_no_bus_reset(struct pc
}
/*
+ * Some NVIDIA GPU devices do not work with bus reset, SBR needs to be
+ * prevented for those affected devices.
+ */
+static void quirk_nvidia_no_bus_reset(struct pci_dev *dev)
+{
+ if ((dev->device & 0xffc0) == 0x2340)
+ quirk_no_bus_reset(dev);
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NVIDIA, PCI_ANY_ID,
+ quirk_nvidia_no_bus_reset);
+
+/*
* Some Atheros AR9xxx and QCA988x chips do not behave after a bus reset.
* The device will throw a Link Down error on AER-capable systems and
* regardless of AER, config space of the device is never accessible again
From: Joakim Zhang <[email protected]>
commit 8f269102baf788aecfcbbc6313b6bceb54c9b990 upstream.
Platform drivers may call stmmac_probe_config_dt() to parse dt, could
call stmmac_remove_config_dt() in error handing after dt parsed, so need
disable clocks in stmmac_remove_config_dt().
Go through all platforms drivers which use stmmac_probe_config_dt(),
none of them disable clocks manually, so it's safe to disable them in
stmmac_remove_config_dt().
Fixes: commit d2ed0a7755fe ("net: ethernet: stmmac: fix of-node and fixed-link-phydev leaks")
Signed-off-by: Joakim Zhang <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c | 2 ++
1 file changed, 2 insertions(+)
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
@@ -626,6 +626,8 @@ error_pclk_get:
void stmmac_remove_config_dt(struct platform_device *pdev,
struct plat_stmmacenet_data *plat)
{
+ clk_disable_unprepare(plat->stmmac_clk);
+ clk_disable_unprepare(plat->pclk);
of_node_put(plat->phy_node);
of_node_put(plat->mdio_node);
}
From: Fugang Duan <[email protected]>
commit cb3cefe3f3f8af27c6076ef7d1f00350f502055d upstream.
Add clock rate zero check to fix coverity issue of "divide by 0".
Fixes: commit 85bd1798b24a ("net: fec: fix spin_lock dead lock")
Signed-off-by: Fugang Duan <[email protected]>
Signed-off-by: Joakim Zhang <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/freescale/fec_ptp.c | 4 ++++
1 file changed, 4 insertions(+)
--- a/drivers/net/ethernet/freescale/fec_ptp.c
+++ b/drivers/net/ethernet/freescale/fec_ptp.c
@@ -602,6 +602,10 @@ void fec_ptp_init(struct platform_device
fep->ptp_caps.enable = fec_ptp_enable;
fep->cycle_speed = clk_get_rate(fep->clk_ptp);
+ if (!fep->cycle_speed) {
+ fep->cycle_speed = NSEC_PER_SEC;
+ dev_err(&fep->pdev->dev, "clk_ptp clock rate is zero\n");
+ }
fep->ptp_inc = NSEC_PER_SEC / fep->cycle_speed;
spin_lock_init(&fep->tmreg_lock);
From: Peter Xu <[email protected]>
commit 099dd6878b9b12d6bbfa6bf29ce0c8ddd38f6901 upstream.
I found it by pure code review, that pte_same_as_swp() of unuse_vma()
didn't take uffd-wp bit into account when comparing ptes.
pte_same_as_swp() returning false negative could cause failure to
swapoff swap ptes that was wr-protected by userfaultfd.
Link: https://lkml.kernel.org/r/[email protected]
Fixes: f45ec5ff16a7 ("userfaultfd: wp: support swap and page migration")
Signed-off-by: Peter Xu <[email protected]>
Acked-by: Hugh Dickins <[email protected]>
Cc: Andrea Arcangeli <[email protected]>
Cc: <[email protected]> [5.7+]
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
include/linux/swapops.h | 15 +++++++++++----
mm/swapfile.c | 2 +-
2 files changed, 12 insertions(+), 5 deletions(-)
--- a/include/linux/swapops.h
+++ b/include/linux/swapops.h
@@ -23,6 +23,16 @@
#define SWP_TYPE_SHIFT (BITS_PER_XA_VALUE - MAX_SWAPFILES_SHIFT)
#define SWP_OFFSET_MASK ((1UL << SWP_TYPE_SHIFT) - 1)
+/* Clear all flags but only keep swp_entry_t related information */
+static inline pte_t pte_swp_clear_flags(pte_t pte)
+{
+ if (pte_swp_soft_dirty(pte))
+ pte = pte_swp_clear_soft_dirty(pte);
+ if (pte_swp_uffd_wp(pte))
+ pte = pte_swp_clear_uffd_wp(pte);
+ return pte;
+}
+
/*
* Store a type+offset into a swp_entry_t in an arch-independent format
*/
@@ -66,10 +76,7 @@ static inline swp_entry_t pte_to_swp_ent
{
swp_entry_t arch_entry;
- if (pte_swp_soft_dirty(pte))
- pte = pte_swp_clear_soft_dirty(pte);
- if (pte_swp_uffd_wp(pte))
- pte = pte_swp_clear_uffd_wp(pte);
+ pte = pte_swp_clear_flags(pte);
arch_entry = __pte_to_swp_entry(pte);
return swp_entry(__swp_type(arch_entry), __swp_offset(arch_entry));
}
--- a/mm/swapfile.c
+++ b/mm/swapfile.c
@@ -1903,7 +1903,7 @@ unsigned int count_swap_pages(int type,
static inline int pte_same_as_swp(pte_t pte, pte_t swp_pte)
{
- return pte_same(pte_swp_clear_soft_dirty(pte), swp_pte);
+ return pte_same(pte_swp_clear_flags(pte), swp_pte);
}
/*
From: Nikolay Aleksandrov <[email protected]>
commit cfc579f9d89af4ada58c69b03bcaa4887840f3b3 upstream.
The egress tunnel code uses dst_clone() and directly sets the result
which is wrong because the entry might have 0 refcnt or be already deleted,
causing number of problems. It also triggers the WARN_ON() in dst_hold()[1]
when a refcnt couldn't be taken. Fix it by using dst_hold_safe() and
checking if a reference was actually taken before setting the dst.
[1] dmesg WARN_ON log and following refcnt errors
WARNING: CPU: 5 PID: 38 at include/net/dst.h:230 br_handle_egress_vlan_tunnel+0x10b/0x134 [bridge]
Modules linked in: 8021q garp mrp bridge stp llc bonding ipv6 virtio_net
CPU: 5 PID: 38 Comm: ksoftirqd/5 Kdump: loaded Tainted: G W 5.13.0-rc3+ #360
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-1.fc33 04/01/2014
RIP: 0010:br_handle_egress_vlan_tunnel+0x10b/0x134 [bridge]
Code: e8 85 bc 01 e1 45 84 f6 74 90 45 31 f6 85 db 48 c7 c7 a0 02 19 a0 41 0f 94 c6 31 c9 31 d2 44 89 f6 e8 64 bc 01 e1 85 db 75 02 <0f> 0b 31 c9 31 d2 44 89 f6 48 c7 c7 70 02 19 a0 e8 4b bc 01 e1 49
RSP: 0018:ffff8881003d39e8 EFLAGS: 00010246
RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000
RDX: 0000000000000000 RSI: 0000000000000001 RDI: ffffffffa01902a0
RBP: ffff8881040c6700 R08: 0000000000000000 R09: 0000000000000001
R10: 2ce93d0054fe0d00 R11: 54fe0d00000e0000 R12: ffff888109515000
R13: 0000000000000000 R14: 0000000000000001 R15: 0000000000000401
FS: 0000000000000000(0000) GS:ffff88822bf40000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f42ba70f030 CR3: 0000000109926000 CR4: 00000000000006e0
Call Trace:
br_handle_vlan+0xbc/0xca [bridge]
__br_forward+0x23/0x164 [bridge]
deliver_clone+0x41/0x48 [bridge]
br_handle_frame_finish+0x36f/0x3aa [bridge]
? skb_dst+0x2e/0x38 [bridge]
? br_handle_ingress_vlan_tunnel+0x3e/0x1c8 [bridge]
? br_handle_frame_finish+0x3aa/0x3aa [bridge]
br_handle_frame+0x2c3/0x377 [bridge]
? __skb_pull+0x33/0x51
? vlan_do_receive+0x4f/0x36a
? br_handle_frame_finish+0x3aa/0x3aa [bridge]
__netif_receive_skb_core+0x539/0x7c6
? __list_del_entry_valid+0x16e/0x1c2
__netif_receive_skb_list_core+0x6d/0xd6
netif_receive_skb_list_internal+0x1d9/0x1fa
gro_normal_list+0x22/0x3e
dev_gro_receive+0x55b/0x600
? detach_buf_split+0x58/0x140
napi_gro_receive+0x94/0x12e
virtnet_poll+0x15d/0x315 [virtio_net]
__napi_poll+0x2c/0x1c9
net_rx_action+0xe6/0x1fb
__do_softirq+0x115/0x2d8
run_ksoftirqd+0x18/0x20
smpboot_thread_fn+0x183/0x19c
? smpboot_unregister_percpu_thread+0x66/0x66
kthread+0x10a/0x10f
? kthread_mod_delayed_work+0xb6/0xb6
ret_from_fork+0x22/0x30
---[ end trace 49f61b07f775fd2b ]---
dst_release: dst:00000000c02d677a refcnt:-1
dst_release underflow
Cc: [email protected]
Fixes: 11538d039ac6 ("bridge: vlan dst_metadata hooks in ingress and egress paths")
Signed-off-by: Nikolay Aleksandrov <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/bridge/br_vlan_tunnel.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/net/bridge/br_vlan_tunnel.c
+++ b/net/bridge/br_vlan_tunnel.c
@@ -204,8 +204,8 @@ int br_handle_egress_vlan_tunnel(struct
return err;
tunnel_dst = rcu_dereference(vlan->tinfo.tunnel_dst);
- if (tunnel_dst)
- skb_dst_set(skb, dst_clone(&tunnel_dst->dst));
+ if (tunnel_dst && dst_hold_safe(&tunnel_dst->dst))
+ skb_dst_set(skb, &tunnel_dst->dst);
return 0;
}
From: Wanpeng Li <[email protected]>
commit dfdc0a714d241bfbf951886c373cd1ae463fcc25 upstream.
Commit c9b8b07cded58 (KVM: x86: Dynamically allocate per-vCPU emulation context)
tries to allocate per-vCPU emulation context dynamically, however, the
x86_emulator slab cache is still exiting after the kvm module is unload
as below after destroying the VM and unloading the kvm module.
grep x86_emulator /proc/slabinfo
x86_emulator 36 36 2672 12 8 : tunables 0 0 0 : slabdata 3 3 0
This patch fixes this slab cache leak by destroying the x86_emulator slab cache
when the kvm module is unloaded.
Fixes: c9b8b07cded58 (KVM: x86: Dynamically allocate per-vCPU emulation context)
Cc: [email protected]
Signed-off-by: Wanpeng Li <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/kvm/x86.c | 1 +
1 file changed, 1 insertion(+)
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -8021,6 +8021,7 @@ void kvm_arch_exit(void)
kvm_x86_ops.hardware_enable = NULL;
kvm_mmu_module_exit();
free_percpu(user_return_msrs);
+ kmem_cache_destroy(x86_emulator_cache);
kmem_cache_destroy(x86_fpu_cache);
}
From: Kees Cook <[email protected]>
commit 8669dbab2ae56085c128894b181c2aa50f97e368 upstream.
Patch series "Actually fix freelist pointer vs redzoning", v4.
This fixes redzoning vs the freelist pointer (both for middle-position
and very small caches). Both are "theoretical" fixes, in that I see no
evidence of such small-sized caches actually be used in the kernel, but
that's no reason to let the bugs continue to exist, especially since
people doing local development keep tripping over it. :)
This patch (of 3):
Instead of repeating "Redzone" and "Poison", clarify which sides of
those zones got tripped. Additionally fix column alignment in the
trailer.
Before:
BUG test (Tainted: G B ): Redzone overwritten
...
Redzone (____ptrval____): bb bb bb bb bb bb bb bb ........
Object (____ptrval____): f6 f4 a5 40 1d e8 ...@..
Redzone (____ptrval____): 1a aa ..
Padding (____ptrval____): 00 00 00 00 00 00 00 00 ........
After:
BUG test (Tainted: G B ): Right Redzone overwritten
...
Redzone (____ptrval____): bb bb bb bb bb bb bb bb ........
Object (____ptrval____): f6 f4 a5 40 1d e8 ...@..
Redzone (____ptrval____): 1a aa ..
Padding (____ptrval____): 00 00 00 00 00 00 00 00 ........
The earlier commits that slowly resulted in the "Before" reporting were:
d86bd1bece6f ("mm/slub: support left redzone")
ffc79d288000 ("slub: use print_hex_dump")
2492268472e7 ("SLUB: change error reporting format to follow lockdep loosely")
Link: https://lkml.kernel.org/r/[email protected]
Link: https://lkml.kernel.org/r/[email protected]
Link: https://lore.kernel.org/lkml/[email protected]/
Signed-off-by: Kees Cook <[email protected]>
Acked-by: Vlastimil Babka <[email protected]>
Cc: Marco Elver <[email protected]>
Cc: "Lin, Zhenpeng" <[email protected]>
Cc: Christoph Lameter <[email protected]>
Cc: Pekka Enberg <[email protected]>
Cc: David Rientjes <[email protected]>
Cc: Joonsoo Kim <[email protected]>
Cc: Roman Gushchin <[email protected]>
Cc: <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
Documentation/vm/slub.rst | 10 +++++-----
mm/slub.c | 14 +++++++-------
2 files changed, 12 insertions(+), 12 deletions(-)
--- a/Documentation/vm/slub.rst
+++ b/Documentation/vm/slub.rst
@@ -181,7 +181,7 @@ SLUB Debug output
Here is a sample of slub debug output::
====================================================================
- BUG kmalloc-8: Redzone overwritten
+ BUG kmalloc-8: Right Redzone overwritten
--------------------------------------------------------------------
INFO: 0xc90f6d28-0xc90f6d2b. First byte 0x00 instead of 0xcc
@@ -189,10 +189,10 @@ Here is a sample of slub debug output::
INFO: Object 0xc90f6d20 @offset=3360 fp=0xc90f6d58
INFO: Allocated in get_modalias+0x61/0xf5 age=53 cpu=1 pid=554
- Bytes b4 0xc90f6d10: 00 00 00 00 00 00 00 00 5a 5a 5a 5a 5a 5a 5a 5a ........ZZZZZZZZ
- Object 0xc90f6d20: 31 30 31 39 2e 30 30 35 1019.005
- Redzone 0xc90f6d28: 00 cc cc cc .
- Padding 0xc90f6d50: 5a 5a 5a 5a 5a 5a 5a 5a ZZZZZZZZ
+ Bytes b4 (0xc90f6d10): 00 00 00 00 00 00 00 00 5a 5a 5a 5a 5a 5a 5a 5a ........ZZZZZZZZ
+ Object (0xc90f6d20): 31 30 31 39 2e 30 30 35 1019.005
+ Redzone (0xc90f6d28): 00 cc cc cc .
+ Padding (0xc90f6d50): 5a 5a 5a 5a 5a 5a 5a 5a ZZZZZZZZ
[<c010523d>] dump_trace+0x63/0x1eb
[<c01053df>] show_trace_log_lvl+0x1a/0x2f
--- a/mm/slub.c
+++ b/mm/slub.c
@@ -698,15 +698,15 @@ static void print_trailer(struct kmem_ca
p, p - addr, get_freepointer(s, p));
if (s->flags & SLAB_RED_ZONE)
- print_section(KERN_ERR, "Redzone ", p - s->red_left_pad,
+ print_section(KERN_ERR, "Redzone ", p - s->red_left_pad,
s->red_left_pad);
else if (p > addr + 16)
print_section(KERN_ERR, "Bytes b4 ", p - 16, 16);
- print_section(KERN_ERR, "Object ", p,
+ print_section(KERN_ERR, "Object ", p,
min_t(unsigned int, s->object_size, PAGE_SIZE));
if (s->flags & SLAB_RED_ZONE)
- print_section(KERN_ERR, "Redzone ", p + s->object_size,
+ print_section(KERN_ERR, "Redzone ", p + s->object_size,
s->inuse - s->object_size);
off = get_info_end(s);
@@ -718,7 +718,7 @@ static void print_trailer(struct kmem_ca
if (off != size_from_object(s))
/* Beginning of the filler is the free pointer */
- print_section(KERN_ERR, "Padding ", p + off,
+ print_section(KERN_ERR, "Padding ", p + off,
size_from_object(s) - off);
dump_stack();
@@ -895,11 +895,11 @@ static int check_object(struct kmem_cach
u8 *endobject = object + s->object_size;
if (s->flags & SLAB_RED_ZONE) {
- if (!check_bytes_and_report(s, page, object, "Redzone",
+ if (!check_bytes_and_report(s, page, object, "Left Redzone",
object - s->red_left_pad, val, s->red_left_pad))
return 0;
- if (!check_bytes_and_report(s, page, object, "Redzone",
+ if (!check_bytes_and_report(s, page, object, "Right Redzone",
endobject, val, s->inuse - s->object_size))
return 0;
} else {
@@ -914,7 +914,7 @@ static int check_object(struct kmem_cach
if (val != SLUB_RED_ACTIVE && (s->flags & __OBJECT_POISON) &&
(!check_bytes_and_report(s, page, p, "Poison", p,
POISON_FREE, s->object_size - 1) ||
- !check_bytes_and_report(s, page, p, "Poison",
+ !check_bytes_and_report(s, page, p, "End Poison",
p + s->object_size - 1, POISON_END, 1)))
return 0;
/*
From: Richard Weinberger <[email protected]>
[ Upstream commit 8bef925e37bdc9b6554b85eda16ced9a8e3c135f ]
TAS2562_TDM_CFG0_SAMPRATE_MASK starts at bit 1, not 0.
So all values need to be left shifted by 1.
Signed-off-by: Richard Weinberger <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/soc/codecs/tas2562.h | 14 +++++++-------
1 file changed, 7 insertions(+), 7 deletions(-)
diff --git a/sound/soc/codecs/tas2562.h b/sound/soc/codecs/tas2562.h
index 81866aeb3fbf..55b2a1f52ca3 100644
--- a/sound/soc/codecs/tas2562.h
+++ b/sound/soc/codecs/tas2562.h
@@ -57,13 +57,13 @@
#define TAS2562_TDM_CFG0_RAMPRATE_MASK BIT(5)
#define TAS2562_TDM_CFG0_RAMPRATE_44_1 BIT(5)
#define TAS2562_TDM_CFG0_SAMPRATE_MASK GENMASK(3, 1)
-#define TAS2562_TDM_CFG0_SAMPRATE_7305_8KHZ 0x0
-#define TAS2562_TDM_CFG0_SAMPRATE_14_7_16KHZ 0x1
-#define TAS2562_TDM_CFG0_SAMPRATE_22_05_24KHZ 0x2
-#define TAS2562_TDM_CFG0_SAMPRATE_29_4_32KHZ 0x3
-#define TAS2562_TDM_CFG0_SAMPRATE_44_1_48KHZ 0x4
-#define TAS2562_TDM_CFG0_SAMPRATE_88_2_96KHZ 0x5
-#define TAS2562_TDM_CFG0_SAMPRATE_176_4_192KHZ 0x6
+#define TAS2562_TDM_CFG0_SAMPRATE_7305_8KHZ (0x0 << 1)
+#define TAS2562_TDM_CFG0_SAMPRATE_14_7_16KHZ (0x1 << 1)
+#define TAS2562_TDM_CFG0_SAMPRATE_22_05_24KHZ (0x2 << 1)
+#define TAS2562_TDM_CFG0_SAMPRATE_29_4_32KHZ (0x3 << 1)
+#define TAS2562_TDM_CFG0_SAMPRATE_44_1_48KHZ (0x4 << 1)
+#define TAS2562_TDM_CFG0_SAMPRATE_88_2_96KHZ (0x5 << 1)
+#define TAS2562_TDM_CFG0_SAMPRATE_176_4_192KHZ (0x6 << 1)
#define TAS2562_TDM_CFG2_RIGHT_JUSTIFY BIT(6)
--
2.30.2
From: Vineet Gupta <[email protected]>
commit 96f1b00138cb8f04c742c82d0a7c460b2202e887 upstream.
ARCv2 has some configuration dependent registers (r30, r58, r59) which
could be targetted by the compiler. To keep the ABI stable, these were
unconditionally part of the glibc ABI
(sysdeps/unix/sysv/linux/arc/sys/ucontext.h:mcontext_t) however we
missed populating them (by saving/restoring them across signal
handling).
This patch fixes the issue by
- adding arcv2 ABI regs to kernel struct sigcontext
- populating them during signal handling
Change to struct sigcontext might seem like a glibc ABI change (although
it primarily uses ucontext_t:mcontext_t) but the fact is
- it has only been extended (existing fields are not touched)
- the old sigcontext was ABI incomplete to begin with anyways
Fixes: https://github.com/foss-for-synopsys-dwc-arc-processors/linux/issues/53
Cc: <[email protected]>
Tested-by: kernel test robot <[email protected]>
Reported-by: Vladimir Isaev <[email protected]>
Signed-off-by: Vineet Gupta <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/arc/include/uapi/asm/sigcontext.h | 1
arch/arc/kernel/signal.c | 43 +++++++++++++++++++++++++++++++++
2 files changed, 44 insertions(+)
--- a/arch/arc/include/uapi/asm/sigcontext.h
+++ b/arch/arc/include/uapi/asm/sigcontext.h
@@ -18,6 +18,7 @@
*/
struct sigcontext {
struct user_regs_struct regs;
+ struct user_regs_arcv2 v2abi;
};
#endif /* _ASM_ARC_SIGCONTEXT_H */
--- a/arch/arc/kernel/signal.c
+++ b/arch/arc/kernel/signal.c
@@ -61,6 +61,41 @@ struct rt_sigframe {
unsigned int sigret_magic;
};
+static int save_arcv2_regs(struct sigcontext *mctx, struct pt_regs *regs)
+{
+ int err = 0;
+#ifndef CONFIG_ISA_ARCOMPACT
+ struct user_regs_arcv2 v2abi;
+
+ v2abi.r30 = regs->r30;
+#ifdef CONFIG_ARC_HAS_ACCL_REGS
+ v2abi.r58 = regs->r58;
+ v2abi.r59 = regs->r59;
+#else
+ v2abi.r58 = v2abi.r59 = 0;
+#endif
+ err = __copy_to_user(&mctx->v2abi, &v2abi, sizeof(v2abi));
+#endif
+ return err;
+}
+
+static int restore_arcv2_regs(struct sigcontext *mctx, struct pt_regs *regs)
+{
+ int err = 0;
+#ifndef CONFIG_ISA_ARCOMPACT
+ struct user_regs_arcv2 v2abi;
+
+ err = __copy_from_user(&v2abi, &mctx->v2abi, sizeof(v2abi));
+
+ regs->r30 = v2abi.r30;
+#ifdef CONFIG_ARC_HAS_ACCL_REGS
+ regs->r58 = v2abi.r58;
+ regs->r59 = v2abi.r59;
+#endif
+#endif
+ return err;
+}
+
static int
stash_usr_regs(struct rt_sigframe __user *sf, struct pt_regs *regs,
sigset_t *set)
@@ -94,6 +129,10 @@ stash_usr_regs(struct rt_sigframe __user
err = __copy_to_user(&(sf->uc.uc_mcontext.regs.scratch), &uregs.scratch,
sizeof(sf->uc.uc_mcontext.regs.scratch));
+
+ if (is_isa_arcv2())
+ err |= save_arcv2_regs(&(sf->uc.uc_mcontext), regs);
+
err |= __copy_to_user(&sf->uc.uc_sigmask, set, sizeof(sigset_t));
return err ? -EFAULT : 0;
@@ -109,6 +148,10 @@ static int restore_usr_regs(struct pt_re
err |= __copy_from_user(&uregs.scratch,
&(sf->uc.uc_mcontext.regs.scratch),
sizeof(sf->uc.uc_mcontext.regs.scratch));
+
+ if (is_isa_arcv2())
+ err |= restore_arcv2_regs(&(sf->uc.uc_mcontext), regs);
+
if (err)
return -EFAULT;
From: Thomas Gleixner <[email protected]>
commit 12f7764ac61200e32c916f038bdc08f884b0b604 upstream.
switch_fpu_finish() checks current->mm as indicator for kernel threads.
That's wrong because kernel threads can temporarily use a mm of a user
process via kthread_use_mm().
Check the task flags for PF_KTHREAD instead.
Fixes: 0cecca9d03c9 ("x86/fpu: Eager switch PKRU state")
Signed-off-by: Thomas Gleixner <[email protected]>
Signed-off-by: Borislav Petkov <[email protected]>
Acked-by: Dave Hansen <[email protected]>
Acked-by: Rik van Riel <[email protected]>
Cc: [email protected]
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/include/asm/fpu/internal.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/arch/x86/include/asm/fpu/internal.h
+++ b/arch/x86/include/asm/fpu/internal.h
@@ -578,7 +578,7 @@ static inline void switch_fpu_finish(str
* PKRU state is switched eagerly because it needs to be valid before we
* return to userland e.g. for a copy_to_user() operation.
*/
- if (current->mm) {
+ if (!(current->flags & PF_KTHREAD)) {
pk = get_xsave_addr(&new_fpu->state.xsave, XFEATURE_PKRU);
if (pk)
pkru_val = pk->pkru;
From: Oder Chiou <[email protected]>
[ Upstream commit 49783c6f4a4f49836b5a109ae0daf2f90b0d7713 ]
Based on ("5a15cd7fce20b1fd4aece6a0240e2b58cd6a225d"), the setting also
should be set in soundwire mode.
Signed-off-by: Oder Chiou <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/soc/codecs/rt5682-sdw.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/sound/soc/codecs/rt5682-sdw.c b/sound/soc/codecs/rt5682-sdw.c
index 58fb13132602..aa6c325faeab 100644
--- a/sound/soc/codecs/rt5682-sdw.c
+++ b/sound/soc/codecs/rt5682-sdw.c
@@ -455,7 +455,8 @@ static int rt5682_io_init(struct device *dev, struct sdw_slave *slave)
regmap_update_bits(rt5682->regmap, RT5682_CBJ_CTRL_2,
RT5682_EXT_JD_SRC, RT5682_EXT_JD_SRC_MANUAL);
- regmap_write(rt5682->regmap, RT5682_CBJ_CTRL_1, 0xd042);
+ regmap_write(rt5682->regmap, RT5682_CBJ_CTRL_1, 0xd142);
+ regmap_update_bits(rt5682->regmap, RT5682_CBJ_CTRL_5, 0x0700, 0x0600);
regmap_update_bits(rt5682->regmap, RT5682_CBJ_CTRL_3,
RT5682_CBJ_IN_BUF_EN, RT5682_CBJ_IN_BUF_EN);
regmap_update_bits(rt5682->regmap, RT5682_SAR_IL_CMD_1,
--
2.30.2
From: Sergio Paracuellos <[email protected]>
[ Upstream commit eb367d875f94a228c17c8538e3f2efcf2eb07ead ]
In 'rt2880_pmx_group_enable' driver is printing an error and returning
-EBUSY if a pin has been already enabled. This begets anoying messages
in the caller when this happens like the following:
rt2880-pinmux pinctrl: pcie is already enabled
mt7621-pci 1e140000.pcie: Error applying setting, reverse things back
To avoid this just print the already enabled message in the pinctrl
driver and return 0 instead to not confuse the user with a real
bad problem.
Signed-off-by: Sergio Paracuellos <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Linus Walleij <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/staging/mt7621-pinctrl/pinctrl-rt2880.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/staging/mt7621-pinctrl/pinctrl-rt2880.c b/drivers/staging/mt7621-pinctrl/pinctrl-rt2880.c
index caaf9e34f1ee..09b0b8a16e99 100644
--- a/drivers/staging/mt7621-pinctrl/pinctrl-rt2880.c
+++ b/drivers/staging/mt7621-pinctrl/pinctrl-rt2880.c
@@ -127,7 +127,7 @@ static int rt2880_pmx_group_enable(struct pinctrl_dev *pctrldev,
if (p->groups[group].enabled) {
dev_err(p->dev, "%s is already enabled\n",
p->groups[group].name);
- return -EBUSY;
+ return 0;
}
p->groups[group].enabled = 1;
--
2.30.2
From: Fan Du <[email protected]>
commit 28e5e44aa3f4e0e0370864ed008fb5e2d85f4dc8 upstream.
tl;dr:
Several SGX users reported seeing the following message on NUMA systems:
sgx: [Firmware Bug]: Unable to map EPC section to online node. Fallback to the NUMA node 0.
This turned out to be the memblock code mistakenly throwing away SGX
memory.
=== Full Changelog ===
The 'max_pfn' variable represents the highest known RAM address. It can
be used, for instance, to quickly determine for which physical addresses
there is mem_map[] space allocated. The numa_meminfo code makes an
effort to throw out ("trim") all memory blocks which are above 'max_pfn'.
SGX memory is not considered RAM (it is marked as "Reserved" in the
e820) and is not taken into account by max_pfn. Despite this, SGX memory
areas have NUMA affinity and are enumerated in the ACPI SRAT table. The
existing SGX code uses the numa_meminfo mechanism to look up the NUMA
affinity for its memory areas.
In cases where SGX memory was above max_pfn (usually just the one EPC
section in the last highest NUMA node), the numa_memblock is truncated
at 'max_pfn', which is below the SGX memory. When the SGX code tries to
look up the affinity of this memory, it fails and produces an error message:
sgx: [Firmware Bug]: Unable to map EPC section to online node. Fallback to the NUMA node 0.
and assigns the memory to NUMA node 0.
Instead of silently truncating the memory block at 'max_pfn' and
dropping the SGX memory, add the truncated portion to
'numa_reserved_meminfo'. This allows the SGX code to later determine
the NUMA affinity of its 'Reserved' area.
Before, numa_meminfo looked like this (from 'crash'):
blk = { start = 0x0, end = 0x2080000000, nid = 0x0 }
{ start = 0x2080000000, end = 0x4000000000, nid = 0x1 }
numa_reserved_meminfo is empty.
With this, numa_meminfo looks like this:
blk = { start = 0x0, end = 0x2080000000, nid = 0x0 }
{ start = 0x2080000000, end = 0x4000000000, nid = 0x1 }
and numa_reserved_meminfo has an entry for node 1's SGX memory:
blk = { start = 0x4000000000, end = 0x4080000000, nid = 0x1 }
[ daveh: completely rewrote/reworked changelog ]
Fixes: 5d30f92e7631 ("x86/NUMA: Provide a range-to-target_node lookup facility")
Reported-by: Reinette Chatre <[email protected]>
Signed-off-by: Fan Du <[email protected]>
Signed-off-by: Dave Hansen <[email protected]>
Signed-off-by: Borislav Petkov <[email protected]>
Reviewed-by: Jarkko Sakkinen <[email protected]>
Reviewed-by: Dan Williams <[email protected]>
Reviewed-by: Dave Hansen <[email protected]>
Cc: <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/mm/numa.c | 8 +++++++-
1 file changed, 7 insertions(+), 1 deletion(-)
--- a/arch/x86/mm/numa.c
+++ b/arch/x86/mm/numa.c
@@ -254,7 +254,13 @@ int __init numa_cleanup_meminfo(struct n
/* make sure all non-reserved blocks are inside the limits */
bi->start = max(bi->start, low);
- bi->end = min(bi->end, high);
+
+ /* preserve info for non-RAM areas above 'max_pfn': */
+ if (bi->end > high) {
+ numa_add_memblk_to(bi->nid, high, bi->end,
+ &numa_reserved_meminfo);
+ bi->end = high;
+ }
/* and there's no empty block */
if (bi->start >= bi->end)
From: Kees Cook <[email protected]>
commit e41a49fadbc80b60b48d3c095d9e2ee7ef7c9a8e upstream.
It turns out that SLUB redzoning ("slub_debug=Z") checks from
s->object_size rather than from s->inuse (which is normally bumped to
make room for the freelist pointer), so a cache created with an object
size less than 24 would have the freelist pointer written beyond
s->object_size, causing the redzone to be corrupted by the freelist
pointer. This was very visible with "slub_debug=ZF":
BUG test (Tainted: G B ): Right Redzone overwritten
-----------------------------------------------------------------------------
INFO: 0xffff957ead1c05de-0xffff957ead1c05df @offset=1502. First byte 0x1a instead of 0xbb
INFO: Slab 0xffffef3950b47000 objects=170 used=170 fp=0x0000000000000000 flags=0x8000000000000200
INFO: Object 0xffff957ead1c05d8 @offset=1496 fp=0xffff957ead1c0620
Redzone (____ptrval____): bb bb bb bb bb bb bb bb ........
Object (____ptrval____): 00 00 00 00 00 f6 f4 a5 ........
Redzone (____ptrval____): 40 1d e8 1a aa @....
Padding (____ptrval____): 00 00 00 00 00 00 00 00 ........
Adjust the offset to stay within s->object_size.
(Note that no caches of in this size range are known to exist in the
kernel currently.)
Link: https://lkml.kernel.org/r/[email protected]
Link: https://lore.kernel.org/linux-mm/[email protected]/
Link: https://lore.kernel.org/lkml/[email protected]/Fixes: 89b83f282d8b (slub: avoid redzone when choosing freepointer location)
Link: https://lore.kernel.org/lkml/CANpmjNOwZ5VpKQn+SYWovTkFB4VsT-RPwyENBmaK0dLcpqStkA@mail.gmail.com
Signed-off-by: Kees Cook <[email protected]>
Reported-by: Marco Elver <[email protected]>
Reported-by: "Lin, Zhenpeng" <[email protected]>
Tested-by: Marco Elver <[email protected]>
Acked-by: Vlastimil Babka <[email protected]>
Cc: Christoph Lameter <[email protected]>
Cc: David Rientjes <[email protected]>
Cc: Joonsoo Kim <[email protected]>
Cc: Pekka Enberg <[email protected]>
Cc: Roman Gushchin <[email protected]>
Cc: <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
mm/slub.c | 14 +++-----------
1 file changed, 3 insertions(+), 11 deletions(-)
--- a/mm/slub.c
+++ b/mm/slub.c
@@ -3639,7 +3639,6 @@ static int calculate_sizes(struct kmem_c
{
slab_flags_t flags = s->flags;
unsigned int size = s->object_size;
- unsigned int freepointer_area;
unsigned int order;
/*
@@ -3648,13 +3647,6 @@ static int calculate_sizes(struct kmem_c
* the possible location of the free pointer.
*/
size = ALIGN(size, sizeof(void *));
- /*
- * This is the area of the object where a freepointer can be
- * safely written. If redzoning adds more to the inuse size, we
- * can't use that portion for writing the freepointer, so
- * s->offset must be limited within this for the general case.
- */
- freepointer_area = size;
#ifdef CONFIG_SLUB_DEBUG
/*
@@ -3680,7 +3672,7 @@ static int calculate_sizes(struct kmem_c
/*
* With that we have determined the number of bytes in actual use
- * by the object. This is the potential offset to the free pointer.
+ * by the object and redzoning.
*/
s->inuse = size;
@@ -3703,13 +3695,13 @@ static int calculate_sizes(struct kmem_c
*/
s->offset = size;
size += sizeof(void *);
- } else if (freepointer_area > sizeof(void *)) {
+ } else {
/*
* Store freelist pointer near middle of object to keep
* it away from the edges of the object to avoid small
* sized over/underflows from neighboring allocations.
*/
- s->offset = ALIGN(freepointer_area / 2, sizeof(void *));
+ s->offset = ALIGN_DOWN(s->object_size / 2, sizeof(void *));
}
#ifdef CONFIG_SLUB_DEBUG
From: Pingfan Liu <[email protected]>
commit 4f5aecdff25f59fb5ea456d5152a913906ecf287 upstream.
As mentioned in kernel commit 1d50e5d0c505 ("crash_core, vmcoreinfo:
Append 'MAX_PHYSMEM_BITS' to vmcoreinfo"), SECTION_SIZE_BITS in the
formula:
#define SECTIONS_SHIFT (MAX_PHYSMEM_BITS - SECTION_SIZE_BITS)
Besides SECTIONS_SHIFT, SECTION_SIZE_BITS is also used to calculate
PAGES_PER_SECTION in makedumpfile just like kernel.
Unfortunately, this arch-dependent macro SECTION_SIZE_BITS changes, e.g.
recently in kernel commit f0b13ee23241 ("arm64/sparsemem: reduce
SECTION_SIZE_BITS"). But user space wants a stable interface to get
this info. Such info is impossible to be deduced from a crashdump
vmcore. Hence append SECTION_SIZE_BITS to vmcoreinfo.
Link: https://lkml.kernel.org/r/[email protected]
Link: http://lists.infradead.org/pipermail/kexec/2021-June/022676.html
Signed-off-by: Pingfan Liu <[email protected]>
Acked-by: Baoquan He <[email protected]>
Cc: Bhupesh Sharma <[email protected]>
Cc: Kazuhito Hagio <[email protected]>
Cc: Dave Young <[email protected]>
Cc: Boris Petkov <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: James Morse <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Will Deacon <[email protected]>
Cc: Catalin Marinas <[email protected]>
Cc: Michael Ellerman <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Benjamin Herrenschmidt <[email protected]>
Cc: Dave Anderson <[email protected]>
Cc: <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
kernel/crash_core.c | 1 +
1 file changed, 1 insertion(+)
--- a/kernel/crash_core.c
+++ b/kernel/crash_core.c
@@ -463,6 +463,7 @@ static int __init crash_save_vmcoreinfo_
VMCOREINFO_LENGTH(mem_section, NR_SECTION_ROOTS);
VMCOREINFO_STRUCT_SIZE(mem_section);
VMCOREINFO_OFFSET(mem_section, section_mem_map);
+ VMCOREINFO_NUMBER(SECTION_SIZE_BITS);
VMCOREINFO_NUMBER(MAX_PHYSMEM_BITS);
#endif
VMCOREINFO_STRUCT_SIZE(page);
From: Tom Lendacky <[email protected]>
commit 8d651ee9c71bb12fc0c8eb2786b66cbe5aa3e43b upstream.
Some drivers require memory that is marked as EFI boot services
data. In order for this memory to not be re-used by the kernel
after ExitBootServices(), efi_mem_reserve() is used to preserve it
by inserting a new EFI memory descriptor and marking it with the
EFI_MEMORY_RUNTIME attribute.
Under SEV, memory marked with the EFI_MEMORY_RUNTIME attribute needs to
be mapped encrypted by Linux, otherwise the kernel might crash at boot
like below:
EFI Variables Facility v0.08 2004-May-17
general protection fault, probably for non-canonical address 0x3597688770a868b2: 0000 [#1] SMP NOPTI
CPU: 13 PID: 1 Comm: swapper/0 Not tainted 5.12.4-2-default #1 openSUSE Tumbleweed
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015
RIP: 0010:efi_mokvar_entry_next
[...]
Call Trace:
efi_mokvar_sysfs_init
? efi_mokvar_table_init
do_one_initcall
? __kmalloc
kernel_init_freeable
? rest_init
kernel_init
ret_from_fork
Expand the __ioremap_check_other() function to additionally check for
this other type of boot data reserved at runtime and indicate that it
should be mapped encrypted for an SEV guest.
[ bp: Massage commit message. ]
Fixes: 58c909022a5a ("efi: Support for MOK variable config table")
Reported-by: Joerg Roedel <[email protected]>
Signed-off-by: Tom Lendacky <[email protected]>
Signed-off-by: Joerg Roedel <[email protected]>
Signed-off-by: Borislav Petkov <[email protected]>
Tested-by: Joerg Roedel <[email protected]>
Cc: <[email protected]> # 5.10+
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/mm/ioremap.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
--- a/arch/x86/mm/ioremap.c
+++ b/arch/x86/mm/ioremap.c
@@ -118,7 +118,9 @@ static void __ioremap_check_other(resour
if (!IS_ENABLED(CONFIG_EFI))
return;
- if (efi_mem_type(addr) == EFI_RUNTIME_SERVICES_DATA)
+ if (efi_mem_type(addr) == EFI_RUNTIME_SERVICES_DATA ||
+ (efi_mem_type(addr) == EFI_BOOT_SERVICES_DATA &&
+ efi_mem_attributes(addr) & EFI_MEMORY_RUNTIME))
desc->flags |= IORES_MAP_ENCRYPTED;
}
From: Jack Pham <[email protected]>
commit 8d396bb0a5b62b326f6be7594d8bd46b088296bd upstream.
The DWC3 DebugFS directory and files are currently created once
during probe. This includes creation of subdirectories for each
of the gadget's endpoints. This works fine for peripheral-only
controllers, as dwc3_core_init_mode() calls dwc3_gadget_init()
just prior to calling dwc3_debugfs_init().
However, for dual-role controllers, dwc3_core_init_mode() will
instead call dwc3_drd_init() which is problematic in a few ways.
First, the initial state must be determined, then dwc3_set_mode()
will have to schedule drd_work and by then dwc3_debugfs_init()
could have already been invoked. Even if the initial mode is
peripheral, dwc3_gadget_init() happens after the DebugFS files
are created, and worse so if the initial state is host and the
controller switches to peripheral much later. And secondly,
even if the gadget endpoints' debug entries were successfully
created, if the controller exits peripheral mode, its dwc3_eps
are freed so the debug files would now hold stale references.
So it is best if the DebugFS endpoint entries are created and
removed dynamically at the same time the underlying dwc3_eps are.
Do this by calling dwc3_debugfs_create_endpoint_dir() as each
endpoint is created, and conversely remove the DebugFS entry when
the endpoint is freed.
Fixes: 41ce1456e1db ("usb: dwc3: core: make dwc3_set_mode() work properly")
Cc: stable <[email protected]>
Reviewed-by: Peter Chen <[email protected]>
Signed-off-by: Jack Pham <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/dwc3/debug.h | 3 +++
drivers/usb/dwc3/debugfs.c | 21 ++-------------------
drivers/usb/dwc3/gadget.c | 3 +++
3 files changed, 8 insertions(+), 19 deletions(-)
--- a/drivers/usb/dwc3/debug.h
+++ b/drivers/usb/dwc3/debug.h
@@ -413,9 +413,12 @@ static inline const char *dwc3_gadget_ge
#ifdef CONFIG_DEBUG_FS
+extern void dwc3_debugfs_create_endpoint_dir(struct dwc3_ep *dep);
extern void dwc3_debugfs_init(struct dwc3 *d);
extern void dwc3_debugfs_exit(struct dwc3 *d);
#else
+static inline void dwc3_debugfs_create_endpoint_dir(struct dwc3_ep *dep)
+{ }
static inline void dwc3_debugfs_init(struct dwc3 *d)
{ }
static inline void dwc3_debugfs_exit(struct dwc3 *d)
--- a/drivers/usb/dwc3/debugfs.c
+++ b/drivers/usb/dwc3/debugfs.c
@@ -890,30 +890,14 @@ static void dwc3_debugfs_create_endpoint
}
}
-static void dwc3_debugfs_create_endpoint_dir(struct dwc3_ep *dep,
- struct dentry *parent)
+void dwc3_debugfs_create_endpoint_dir(struct dwc3_ep *dep)
{
struct dentry *dir;
- dir = debugfs_create_dir(dep->name, parent);
+ dir = debugfs_create_dir(dep->name, dep->dwc->root);
dwc3_debugfs_create_endpoint_files(dep, dir);
}
-static void dwc3_debugfs_create_endpoint_dirs(struct dwc3 *dwc,
- struct dentry *parent)
-{
- int i;
-
- for (i = 0; i < dwc->num_eps; i++) {
- struct dwc3_ep *dep = dwc->eps[i];
-
- if (!dep)
- continue;
-
- dwc3_debugfs_create_endpoint_dir(dep, parent);
- }
-}
-
void dwc3_debugfs_init(struct dwc3 *dwc)
{
struct dentry *root;
@@ -944,7 +928,6 @@ void dwc3_debugfs_init(struct dwc3 *dwc)
&dwc3_testmode_fops);
debugfs_create_file("link_state", 0644, root, dwc,
&dwc3_link_state_fops);
- dwc3_debugfs_create_endpoint_dirs(dwc, root);
}
}
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -2664,6 +2664,8 @@ static int dwc3_gadget_init_endpoint(str
INIT_LIST_HEAD(&dep->started_list);
INIT_LIST_HEAD(&dep->cancelled_list);
+ dwc3_debugfs_create_endpoint_dir(dep);
+
return 0;
}
@@ -2707,6 +2709,7 @@ static void dwc3_gadget_free_endpoints(s
list_del(&dep->endpoint.ep_list);
}
+ debugfs_remove_recursive(debugfs_lookup(dep->name, dwc->root));
kfree(dep);
}
}
From: Avraham Stern <[email protected]>
commit 0288e5e16a2e18f0b7e61a2b70d9037fc6e4abeb upstream.
If cfg80211_pmsr_process_abort() moves all the PMSR requests that
need to be freed into a local list before aborting and freeing them.
As a result, it is possible that cfg80211_pmsr_complete() will run in
parallel and free the same PMSR request.
Fix it by freeing the request in cfg80211_pmsr_complete() only if it
is still in the original pmsr list.
Cc: [email protected]
Fixes: 9bb7e0f24e7e ("cfg80211: add peer measurement with FTM initiator API")
Signed-off-by: Avraham Stern <[email protected]>
Signed-off-by: Luca Coelho <[email protected]>
Link: https://lore.kernel.org/r/iwlwifi.20210618133832.1fbef57e269a.I00294bebdb0680b892f8d1d5c871fd9dbe785a5e@changeid
Signed-off-by: Johannes Berg <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/wireless/pmsr.c | 16 ++++++++++++++--
1 file changed, 14 insertions(+), 2 deletions(-)
--- a/net/wireless/pmsr.c
+++ b/net/wireless/pmsr.c
@@ -324,6 +324,7 @@ void cfg80211_pmsr_complete(struct wirel
gfp_t gfp)
{
struct cfg80211_registered_device *rdev = wiphy_to_rdev(wdev->wiphy);
+ struct cfg80211_pmsr_request *tmp, *prev, *to_free = NULL;
struct sk_buff *msg;
void *hdr;
@@ -354,9 +355,20 @@ free_msg:
nlmsg_free(msg);
free_request:
spin_lock_bh(&wdev->pmsr_lock);
- list_del(&req->list);
+ /*
+ * cfg80211_pmsr_process_abort() may have already moved this request
+ * to the free list, and will free it later. In this case, don't free
+ * it here.
+ */
+ list_for_each_entry_safe(tmp, prev, &wdev->pmsr_list, list) {
+ if (tmp == req) {
+ list_del(&req->list);
+ to_free = req;
+ break;
+ }
+ }
spin_unlock_bh(&wdev->pmsr_lock);
- kfree(req);
+ kfree(to_free);
}
EXPORT_SYMBOL_GPL(cfg80211_pmsr_complete);
From: Peter Chen <[email protected]>
commit 4bf584a03eec674975ee9fe36c8583d9d470dab1 upstream.
When do system reboot, it calls dwc3_shutdown and the whole debugfs
for dwc3 has removed first, when the gadget tries to do deinit, and
remove debugfs for its endpoints, it meets NULL pointer dereference
issue when call debugfs_lookup. Fix it by removing the whole dwc3
debugfs later than dwc3_drd_exit.
[ 2924.958838] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000002
....
[ 2925.030994] pstate: 60000005 (nZCv daif -PAN -UAO -TCO BTYPE=--)
[ 2925.037005] pc : inode_permission+0x2c/0x198
[ 2925.041281] lr : lookup_one_len_common+0xb0/0xf8
[ 2925.045903] sp : ffff80001276ba70
[ 2925.049218] x29: ffff80001276ba70 x28: ffff0000c01f0000 x27: 0000000000000000
[ 2925.056364] x26: ffff800011791e70 x25: 0000000000000008 x24: dead000000000100
[ 2925.063510] x23: dead000000000122 x22: 0000000000000000 x21: 0000000000000001
[ 2925.070652] x20: ffff8000122c6188 x19: 0000000000000000 x18: 0000000000000000
[ 2925.077797] x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000004
[ 2925.084943] x14: ffffffffffffffff x13: 0000000000000000 x12: 0000000000000030
[ 2925.092087] x11: 0101010101010101 x10: 7f7f7f7f7f7f7f7f x9 : ffff8000102b2420
[ 2925.099232] x8 : 7f7f7f7f7f7f7f7f x7 : feff73746e2f6f64 x6 : 0000000000008080
[ 2925.106378] x5 : 61c8864680b583eb x4 : 209e6ec2d263dbb7 x3 : 000074756f307065
[ 2925.113523] x2 : 0000000000000001 x1 : 0000000000000000 x0 : ffff8000122c6188
[ 2925.120671] Call trace:
[ 2925.123119] inode_permission+0x2c/0x198
[ 2925.127042] lookup_one_len_common+0xb0/0xf8
[ 2925.131315] lookup_one_len_unlocked+0x34/0xb0
[ 2925.135764] lookup_positive_unlocked+0x14/0x50
[ 2925.140296] debugfs_lookup+0x68/0xa0
[ 2925.143964] dwc3_gadget_free_endpoints+0x84/0xb0
[ 2925.148675] dwc3_gadget_exit+0x28/0x78
[ 2925.152518] dwc3_drd_exit+0x100/0x1f8
[ 2925.156267] dwc3_remove+0x11c/0x120
[ 2925.159851] dwc3_shutdown+0x14/0x20
[ 2925.163432] platform_shutdown+0x28/0x38
[ 2925.167360] device_shutdown+0x15c/0x378
[ 2925.171291] kernel_restart_prepare+0x3c/0x48
[ 2925.175650] kernel_restart+0x1c/0x68
[ 2925.179316] __do_sys_reboot+0x218/0x240
[ 2925.183247] __arm64_sys_reboot+0x28/0x30
[ 2925.187262] invoke_syscall+0x48/0x100
[ 2925.191017] el0_svc_common.constprop.0+0x48/0xc8
[ 2925.195726] do_el0_svc+0x28/0x88
[ 2925.199045] el0_svc+0x20/0x30
[ 2925.202104] el0_sync_handler+0xa8/0xb0
[ 2925.205942] el0_sync+0x148/0x180
[ 2925.209270] Code: a9025bf5 2a0203f5 121f0056 370802b5 (79400660)
[ 2925.215372] ---[ end trace 124254d8e485a58b ]---
[ 2925.220012] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b
[ 2925.227676] Kernel Offset: disabled
[ 2925.231164] CPU features: 0x00001001,20000846
[ 2925.235521] Memory Limit: none
[ 2925.238580] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b ]---
Fixes: 8d396bb0a5b6 ("usb: dwc3: debugfs: Add and remove endpoint dirs dynamically")
Cc: Jack Pham <[email protected]>
Tested-by: Jack Pham <[email protected]>
Signed-off-by: Peter Chen <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
(cherry picked from commit 2a042767814bd0edf2619f06fecd374e266ea068)
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/dwc3/core.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -1642,8 +1642,8 @@ static int dwc3_remove(struct platform_d
pm_runtime_get_sync(&pdev->dev);
- dwc3_debugfs_exit(dwc);
dwc3_core_exit_mode(dwc);
+ dwc3_debugfs_exit(dwc);
dwc3_core_exit(dwc);
dwc3_ulpi_exit(dwc);
From: Johannes Berg <[email protected]>
commit b5642479b0f7168fe16d156913533fe65ab4f8d5 upstream.
If all net/wireless/certs/*.hex files are deleted, the build
will hang at this point since the 'cat' command will have no
arguments. Do "echo | cat - ..." so that even if the "..."
part is empty, the whole thing won't hang.
Cc: [email protected]
Signed-off-by: Johannes Berg <[email protected]>
Signed-off-by: Luca Coelho <[email protected]>
Link: https://lore.kernel.org/r/iwlwifi.20210618133832.c989056c3664.Ic3b77531d00b30b26dcd69c64e55ae2f60c3f31e@changeid
Signed-off-by: Johannes Berg <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/wireless/Makefile | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/net/wireless/Makefile
+++ b/net/wireless/Makefile
@@ -28,7 +28,7 @@ $(obj)/shipped-certs.c: $(wildcard $(src
@$(kecho) " GEN $@"
@(echo '#include "reg.h"'; \
echo 'const u8 shipped_regdb_certs[] = {'; \
- cat $^ ; \
+ echo | cat - $^ ; \
echo '};'; \
echo 'unsigned int shipped_regdb_certs_len = sizeof(shipped_regdb_certs);'; \
) > $@
From: Andy Lutomirski <[email protected]>
commit d8778e393afa421f1f117471144f8ce6deb6953a upstream.
Both Intel and AMD consider it to be architecturally valid for XRSTOR to
fail with #PF but nonetheless change the register state. The actual
conditions under which this might occur are unclear [1], but it seems
plausible that this might be triggered if one sibling thread unmaps a page
and invalidates the shared TLB while another sibling thread is executing
XRSTOR on the page in question.
__fpu__restore_sig() can execute XRSTOR while the hardware registers
are preserved on behalf of a different victim task (using the
fpu_fpregs_owner_ctx mechanism), and, in theory, XRSTOR could fail but
modify the registers.
If this happens, then there is a window in which __fpu__restore_sig()
could schedule out and the victim task could schedule back in without
reloading its own FPU registers. This would result in part of the FPU
state that __fpu__restore_sig() was attempting to load leaking into the
victim task's user-visible state.
Invalidate preserved FPU registers on XRSTOR failure to prevent this
situation from corrupting any state.
[1] Frequent readers of the errata lists might imagine "complex
microarchitectural conditions".
Fixes: 1d731e731c4c ("x86/fpu: Add a fastpath to __fpu__restore_sig()")
Signed-off-by: Andy Lutomirski <[email protected]>
Signed-off-by: Thomas Gleixner <[email protected]>
Signed-off-by: Borislav Petkov <[email protected]>
Acked-by: Dave Hansen <[email protected]>
Acked-by: Rik van Riel <[email protected]>
Cc: [email protected]
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/kernel/fpu/signal.c | 19 +++++++++++++++++++
1 file changed, 19 insertions(+)
--- a/arch/x86/kernel/fpu/signal.c
+++ b/arch/x86/kernel/fpu/signal.c
@@ -369,6 +369,25 @@ static int __fpu__restore_sig(void __use
fpregs_unlock();
return 0;
}
+
+ /*
+ * The above did an FPU restore operation, restricted to
+ * the user portion of the registers, and failed, but the
+ * microcode might have modified the FPU registers
+ * nevertheless.
+ *
+ * If the FPU registers do not belong to current, then
+ * invalidate the FPU register state otherwise the task might
+ * preempt current and return to user space with corrupted
+ * FPU registers.
+ *
+ * In case current owns the FPU registers then no further
+ * action is required. The fixup below will handle it
+ * correctly.
+ */
+ if (test_thread_flag(TIF_NEED_FPU_LOAD))
+ __cpu_invalidate_fpregs_state();
+
fpregs_unlock();
} else {
/*
From: Thomas Gleixner <[email protected]>
commit efa165504943f2128d50f63de0c02faf6dcceb0d upstream.
If access_ok() or fpregs_soft_set() fails in __fpu__restore_sig() then the
function just returns but does not clear the FPU state as it does for all
other fatal failures.
Clear the FPU state for these failures as well.
Fixes: 72a671ced66d ("x86, fpu: Unify signal handling code paths for x86 and x86_64 kernels")
Signed-off-by: Thomas Gleixner <[email protected]>
Signed-off-by: Borislav Petkov <[email protected]>
Cc: [email protected]
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/kernel/fpu/signal.c | 26 +++++++++++++++-----------
1 file changed, 15 insertions(+), 11 deletions(-)
--- a/arch/x86/kernel/fpu/signal.c
+++ b/arch/x86/kernel/fpu/signal.c
@@ -307,13 +307,17 @@ static int __fpu__restore_sig(void __use
return 0;
}
- if (!access_ok(buf, size))
- return -EACCES;
+ if (!access_ok(buf, size)) {
+ ret = -EACCES;
+ goto out;
+ }
- if (!static_cpu_has(X86_FEATURE_FPU))
- return fpregs_soft_set(current, NULL,
- 0, sizeof(struct user_i387_ia32_struct),
- NULL, buf) != 0;
+ if (!static_cpu_has(X86_FEATURE_FPU)) {
+ ret = fpregs_soft_set(current, NULL, 0,
+ sizeof(struct user_i387_ia32_struct),
+ NULL, buf);
+ goto out;
+ }
if (use_xsave()) {
struct _fpx_sw_bytes fx_sw_user;
@@ -396,7 +400,7 @@ static int __fpu__restore_sig(void __use
*/
ret = __copy_from_user(&env, buf, sizeof(env));
if (ret)
- goto err_out;
+ goto out;
envp = &env;
}
@@ -426,7 +430,7 @@ static int __fpu__restore_sig(void __use
ret = copy_user_to_xstate(&fpu->state.xsave, buf_fx);
if (ret)
- goto err_out;
+ goto out;
sanitize_restored_user_xstate(&fpu->state, envp, user_xfeatures,
fx_only);
@@ -446,7 +450,7 @@ static int __fpu__restore_sig(void __use
ret = __copy_from_user(&fpu->state.fxsave, buf_fx, state_size);
if (ret) {
ret = -EFAULT;
- goto err_out;
+ goto out;
}
sanitize_restored_user_xstate(&fpu->state, envp, user_xfeatures,
@@ -464,7 +468,7 @@ static int __fpu__restore_sig(void __use
} else {
ret = __copy_from_user(&fpu->state.fsave, buf_fx, state_size);
if (ret)
- goto err_out;
+ goto out;
fpregs_lock();
ret = copy_kernel_to_fregs_err(&fpu->state.fsave);
@@ -475,7 +479,7 @@ static int __fpu__restore_sig(void __use
fpregs_deactivate(fpu);
fpregs_unlock();
-err_out:
+out:
if (ret)
fpu__clear_user_states(fpu);
return ret;
From: Thomas Gleixner <[email protected]>
commit 484cea4f362e1eeb5c869abbfb5f90eae6421b38 upstream.
The non-compacted slowpath uses __copy_from_user() and copies the entire
user buffer into the kernel buffer, verbatim. This means that the kernel
buffer may now contain entirely invalid state on which XRSTOR will #GP.
validate_user_xstate_header() can detect some of that corruption, but that
leaves the onus on callers to clear the buffer.
Prior to XSAVES support, it was possible just to reinitialize the buffer,
completely, but with supervisor states that is not longer possible as the
buffer clearing code split got it backwards. Fixing that is possible but
not corrupting the state in the first place is more robust.
Avoid corruption of the kernel XSAVE buffer by using copy_user_to_xstate()
which validates the XSAVE header contents before copying the actual states
to the kernel. copy_user_to_xstate() was previously only called for
compacted-format kernel buffers, but it works for both compacted and
non-compacted forms.
Using it for the non-compacted form is slower because of multiple
__copy_from_user() operations, but that cost is less important than robust
code in an already slow path.
[ Changelog polished by Dave Hansen ]
Fixes: b860eb8dce59 ("x86/fpu/xstate: Define new functions for clearing fpregs and xstates")
Reported-by: [email protected]
Signed-off-by: Thomas Gleixner <[email protected]>
Signed-off-by: Borislav Petkov <[email protected]>
Reviewed-by: Borislav Petkov <[email protected]>
Acked-by: Dave Hansen <[email protected]>
Acked-by: Rik van Riel <[email protected]>
Cc: [email protected]
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/kernel/fpu/signal.c | 9 +--------
1 file changed, 1 insertion(+), 8 deletions(-)
--- a/arch/x86/kernel/fpu/signal.c
+++ b/arch/x86/kernel/fpu/signal.c
@@ -405,14 +405,7 @@ static int __fpu__restore_sig(void __use
if (use_xsave() && !fx_only) {
u64 init_bv = xfeatures_mask_user() & ~user_xfeatures;
- if (using_compacted_format()) {
- ret = copy_user_to_xstate(&fpu->state.xsave, buf_fx);
- } else {
- ret = __copy_from_user(&fpu->state.xsave, buf_fx, state_size);
-
- if (!ret && state_size > offsetof(struct xregs_state, header))
- ret = validate_user_xstate_header(&fpu->state.xsave.header);
- }
+ ret = copy_user_to_xstate(&fpu->state.xsave, buf_fx);
if (ret)
goto err_out;
From: Arnaldo Carvalho de Melo <[email protected]>
commit 1792a59eab9593de2eae36c40c5a22d70f52c026 upstream.
To pick the changes in:
321827477360934d ("icmp: don't send out ICMP messages with a source address of 0.0.0.0")
That don't result in any change in tooling, as INADDR_ are not used to
generate id->string tables used by 'perf trace'.
This addresses this build warning:
Warning: Kernel ABI header at 'tools/include/uapi/linux/in.h' differs from latest version at 'include/uapi/linux/in.h'
diff -u tools/include/uapi/linux/in.h include/uapi/linux/in.h
Cc: David S. Miller <[email protected]>
Cc: Toke Høiland-Jørgensen <[email protected]>
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
tools/include/uapi/linux/in.h | 3 +++
1 file changed, 3 insertions(+)
--- a/tools/include/uapi/linux/in.h
+++ b/tools/include/uapi/linux/in.h
@@ -289,6 +289,9 @@ struct sockaddr_in {
/* Address indicating an error return. */
#define INADDR_NONE ((unsigned long int) 0xffffffff)
+/* Dummy address for src of ICMP replies if no real address is set (RFC7600). */
+#define INADDR_DUMMY ((unsigned long int) 0xc0000008)
+
/* Network number for local host loopback. */
#define IN_LOOPBACKNET 127
From: Andrew Morton <[email protected]>
commit 1b3865d016815cbd69a1879ca1c8a8901fda1072 upstream.
Fixes build with CONFIG_SLAB_FREELIST_HARDENED=y.
Hopefully. But it's the right thing to do anwyay.
Fixes: 1ad53d9fa3f61 ("slub: improve bit diffusion for freelist ptr obfuscation")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=213417
Reported-by: <[email protected]>
Acked-by: Kees Cook <[email protected]>
Cc: <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
mm/slub.c | 1 +
1 file changed, 1 insertion(+)
--- a/mm/slub.c
+++ b/mm/slub.c
@@ -15,6 +15,7 @@
#include <linux/module.h>
#include <linux/bit_spinlock.h>
#include <linux/interrupt.h>
+#include <linux/swab.h>
#include <linux/bitops.h>
#include <linux/slab.h>
#include "slab.h"
From: Kees Cook <[email protected]>
commit 74c1d3e081533825f2611e46edea1fcdc0701985 upstream.
The redzone area for SLUB exists between s->object_size and s->inuse
(which is at least the word-aligned object_size). If a cache were
created with an object_size smaller than sizeof(void *), the in-object
stored freelist pointer would overwrite the redzone (e.g. with boot
param "slub_debug=ZF"):
BUG test (Tainted: G B ): Right Redzone overwritten
-----------------------------------------------------------------------------
INFO: 0xffff957ead1c05de-0xffff957ead1c05df @offset=1502. First byte 0x1a instead of 0xbb
INFO: Slab 0xffffef3950b47000 objects=170 used=170 fp=0x0000000000000000 flags=0x8000000000000200
INFO: Object 0xffff957ead1c05d8 @offset=1496 fp=0xffff957ead1c0620
Redzone (____ptrval____): bb bb bb bb bb bb bb bb ........
Object (____ptrval____): f6 f4 a5 40 1d e8 ...@..
Redzone (____ptrval____): 1a aa ..
Padding (____ptrval____): 00 00 00 00 00 00 00 00 ........
Store the freelist pointer out of line when object_size is smaller than
sizeof(void *) and redzoning is enabled.
Additionally remove the "smaller than sizeof(void *)" check under
CONFIG_DEBUG_VM in kmem_cache_sanity_check() as it is now redundant:
SLAB and SLOB both handle small sizes.
(Note that no caches within this size range are known to exist in the
kernel currently.)
Link: https://lkml.kernel.org/r/[email protected]
Fixes: 81819f0fc828 ("SLUB core")
Signed-off-by: Kees Cook <[email protected]>
Acked-by: Vlastimil Babka <[email protected]>
Cc: Christoph Lameter <[email protected]>
Cc: David Rientjes <[email protected]>
Cc: Joonsoo Kim <[email protected]>
Cc: "Lin, Zhenpeng" <[email protected]>
Cc: Marco Elver <[email protected]>
Cc: Pekka Enberg <[email protected]>
Cc: Roman Gushchin <[email protected]>
Cc: <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
mm/slab_common.c | 3 +--
mm/slub.c | 8 +++++---
2 files changed, 6 insertions(+), 5 deletions(-)
--- a/mm/slab_common.c
+++ b/mm/slab_common.c
@@ -87,8 +87,7 @@ EXPORT_SYMBOL(kmem_cache_size);
#ifdef CONFIG_DEBUG_VM
static int kmem_cache_sanity_check(const char *name, unsigned int size)
{
- if (!name || in_interrupt() || size < sizeof(void *) ||
- size > KMALLOC_MAX_SIZE) {
+ if (!name || in_interrupt() || size > KMALLOC_MAX_SIZE) {
pr_err("kmem_cache_create(%s) integrity check failed\n", name);
return -EINVAL;
}
--- a/mm/slub.c
+++ b/mm/slub.c
@@ -3684,15 +3684,17 @@ static int calculate_sizes(struct kmem_c
*/
s->inuse = size;
- if (((flags & (SLAB_TYPESAFE_BY_RCU | SLAB_POISON)) ||
- s->ctor)) {
+ if ((flags & (SLAB_TYPESAFE_BY_RCU | SLAB_POISON)) ||
+ ((flags & SLAB_RED_ZONE) && s->object_size < sizeof(void *)) ||
+ s->ctor) {
/*
* Relocate free pointer after the object if it is not
* permitted to overwrite the first word of the object on
* kmem_cache_free.
*
* This is the case if we do RCU, have a constructor or
- * destructor or are poisoning the objects.
+ * destructor, are poisoning the objects, or are
+ * redzoning an object smaller than sizeof(void *).
*
* The assumption that s->offset >= s->inuse means free
* pointer is outside of the object is used in the
From: Arnaldo Carvalho de Melo <[email protected]>
commit ef83f9efe8461b8fd71eb60b53dbb6a5dd7b39e9 upstream.
To pick the changes in:
ea6932d70e223e02 ("net: make get_net_ns return error if NET_NS is disabled")
That don't result in any changes in the tables generated from that
header.
This silences this perf build warning:
Warning: Kernel ABI header at 'tools/perf/trace/beauty/include/linux/socket.h' differs from latest version at 'include/linux/socket.h'
diff -u tools/perf/trace/beauty/include/linux/socket.h include/linux/socket.h
Cc: Changbin Du <[email protected]>
Cc: David S. Miller <[email protected]>
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
tools/perf/trace/beauty/include/linux/socket.h | 2 --
1 file changed, 2 deletions(-)
--- a/tools/perf/trace/beauty/include/linux/socket.h
+++ b/tools/perf/trace/beauty/include/linux/socket.h
@@ -437,6 +437,4 @@ extern int __sys_getpeername(int fd, str
extern int __sys_socketpair(int family, int type, int protocol,
int __user *usockvec);
extern int __sys_shutdown(int fd, int how);
-
-extern struct ns_common *get_net_ns(struct ns_common *ns);
#endif /* _LINUX_SOCKET_H */
From: Thomas Gleixner <[email protected]>
commit 510b80a6a0f1a0d114c6e33bcea64747d127973c upstream.
When user space brings PKRU into init state, then the kernel handling is
broken:
T1 user space
xsave(state)
state.header.xfeatures &= ~XFEATURE_MASK_PKRU;
xrstor(state)
T1 -> kernel
schedule()
XSAVE(S) -> T1->xsave.header.xfeatures[PKRU] == 0
T1->flags |= TIF_NEED_FPU_LOAD;
wrpkru();
schedule()
...
pk = get_xsave_addr(&T1->fpu->state.xsave, XFEATURE_PKRU);
if (pk)
wrpkru(pk->pkru);
else
wrpkru(DEFAULT_PKRU);
Because the xfeatures bit is 0 and therefore the value in the xsave
storage is not valid, get_xsave_addr() returns NULL and switch_to()
writes the default PKRU. -> FAIL #1!
So that wrecks any copy_to/from_user() on the way back to user space
which hits memory which is protected by the default PKRU value.
Assumed that this does not fail (pure luck) then T1 goes back to user
space and because TIF_NEED_FPU_LOAD is set it ends up in
switch_fpu_return()
__fpregs_load_activate()
if (!fpregs_state_valid()) {
load_XSTATE_from_task();
}
But if nothing touched the FPU between T1 scheduling out and back in,
then the fpregs_state is still valid which means switch_fpu_return()
does nothing and just clears TIF_NEED_FPU_LOAD. Back to user space with
DEFAULT_PKRU loaded. -> FAIL #2!
The fix is simple: if get_xsave_addr() returns NULL then set the
PKRU value to 0 instead of the restrictive default PKRU value in
init_pkru_value.
[ bp: Massage in minor nitpicks from folks. ]
Fixes: 0cecca9d03c9 ("x86/fpu: Eager switch PKRU state")
Signed-off-by: Thomas Gleixner <[email protected]>
Signed-off-by: Borislav Petkov <[email protected]>
Acked-by: Dave Hansen <[email protected]>
Acked-by: Rik van Riel <[email protected]>
Tested-by: Babu Moger <[email protected]>
Cc: [email protected]
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/include/asm/fpu/internal.h | 11 +++++++++--
1 file changed, 9 insertions(+), 2 deletions(-)
--- a/arch/x86/include/asm/fpu/internal.h
+++ b/arch/x86/include/asm/fpu/internal.h
@@ -579,9 +579,16 @@ static inline void switch_fpu_finish(str
* return to userland e.g. for a copy_to_user() operation.
*/
if (!(current->flags & PF_KTHREAD)) {
+ /*
+ * If the PKRU bit in xsave.header.xfeatures is not set,
+ * then the PKRU component was in init state, which means
+ * XRSTOR will set PKRU to 0. If the bit is not set then
+ * get_xsave_addr() will return NULL because the PKRU value
+ * in memory is not valid. This means pkru_val has to be
+ * set to 0 and not to init_pkru_value.
+ */
pk = get_xsave_addr(&new_fpu->state.xsave, XFEATURE_PKRU);
- if (pk)
- pkru_val = pk->pkru;
+ pkru_val = pk ? pk->pkru : 0;
}
__write_pkru(pkru_val);
}
From: Alexander Gordeev <[email protected]>
commit 5bcbe3285fb614c49db6b238253f7daff7e66312 upstream.
The size of SIE critical section is calculated wrongly
as result of a missed subtraction in commit 0b0ed657fe00
("s390: remove critical section cleanup from entry.S")
Fixes: 0b0ed657fe00 ("s390: remove critical section cleanup from entry.S")
Cc: <[email protected]>
Signed-off-by: Alexander Gordeev <[email protected]>
Reviewed-by: Christian Borntraeger <[email protected]>
Signed-off-by: Heiko Carstens <[email protected]>
Signed-off-by: Vasily Gorbik <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/s390/kernel/entry.S | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/arch/s390/kernel/entry.S
+++ b/arch/s390/kernel/entry.S
@@ -1284,7 +1284,7 @@ ENDPROC(stack_overflow)
je 1f
larl %r13,.Lsie_entry
slgr %r9,%r13
- larl %r13,.Lsie_skip
+ lghi %r13,.Lsie_skip - .Lsie_entry
clgr %r9,%r13
jh 1f
oi __LC_CPU_FLAGS+7, _CIF_MCCK_GUEST
On 6/21/21 9:13 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.10.46 release.
> There are 146 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed, 23 Jun 2021 15:48:46 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.10.46-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.10.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
On ARCH_BRCMSTB, using 32-bit and 64-bit ARM kernels:
Tested-by: Florian Fainelli <[email protected]>
--
Florian
On Mon, 21 Jun 2021 at 21:51, Greg Kroah-Hartman
<[email protected]> wrote:
>
> This is the start of the stable review cycle for the 5.10.46 release.
> There are 146 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed, 23 Jun 2021 15:48:46 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.10.46-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.10.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
Results from Linaro’s test farm.
No regressions on arm64, arm, x86_64, and i386.
Tested-by: Linux Kernel Functional Testing <[email protected]>
## Build
* kernel: 5.10.46-rc1
* git: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
* git branch: linux-5.10.y
* git commit: c00b84692b513471386cc0db08f8ac9020f88659
* git describe: v5.10.45-147-gc00b84692b51
* test details:
https://qa-reports.linaro.org/lkft/linux-stable-rc-linux-5.10.y/build/v5.10.45-147-gc00b84692b51
## No regressions (compared to v5.10.45)
## No fixes (compared to v5.10.45)
## Test result summary
total: 79686, pass: 65434, fail: 2147, skip: 11258, xfail: 847,
## Build Summary
* arc: 10 total, 10 passed, 0 failed
* arm: 193 total, 193 passed, 0 failed
* arm64: 27 total, 27 passed, 0 failed
* dragonboard-410c: 1 total, 1 passed, 0 failed
* hi6220-hikey: 1 total, 1 passed, 0 failed
* i386: 26 total, 26 passed, 0 failed
* juno-r2: 1 total, 1 passed, 0 failed
* mips: 45 total, 45 passed, 0 failed
* parisc: 9 total, 9 passed, 0 failed
* powerpc: 27 total, 27 passed, 0 failed
* riscv: 21 total, 21 passed, 0 failed
* s390: 18 total, 18 passed, 0 failed
* sh: 18 total, 18 passed, 0 failed
* sparc: 9 total, 9 passed, 0 failed
* x15: 1 total, 1 passed, 0 failed
* x86: 1 total, 1 passed, 0 failed
* x86_64: 27 total, 27 passed, 0 failed
## Test suites summary
* fwts
* install-android-platform-tools-r2600
* kselftest-
* kselftest-android
* kselftest-bpf
* kselftest-breakpoints
* kselftest-capabilities
* kselftest-cgroup
* kselftest-clone3
* kselftest-core
* kselftest-cpu-hotplug
* kselftest-cpufreq
* kselftest-drivers
* kselftest-efivarfs
* kselftest-filesystems
* kselftest-firmware
* kselftest-fpu
* kselftest-futex
* kselftest-gpio
* kselftest-intel_pstate
* kselftest-ipc
* kselftest-ir
* kselftest-kcmp
* kselftest-kexec
* kselftest-kvm
* kselftest-lib
* kselftest-livepatch
* kselftest-lkdtm
* kselftest-membarrier
* kselftest-memfd
* kselftest-memory-hotplug
* kselftest-mincore
* kselftest-mount
* kselftest-mqueue
* kselftest-net
* kselftest-netfilter
* kselftest-nsfs
* kselftest-openat2
* kselftest-pid_namespace
* kselftest-pidfd
* kselftest-proc
* kselftest-pstore
* kselftest-ptrace
* kselftest-rseq
* kselftest-rtc
* kselftest-seccomp
* kselftest-sigaltstack
* kselftest-size
* kselftest-splice
* kselftest-static_keys
* kselftest-sync
* kselftest-sysctl
* kselftest-tc-testing
* kselftest-timens
* kselftest-timers
* kselftest-tmpfs
* kselftest-tpm2
* kselftest-user
* kselftest-vm
* kselftest-vsyscall-mode-native-
* kselftest-vsyscall-mode-none-
* kselftest-x86
* kselftest-zram
* kunit
* kvm-unit-tests
* libhugetlbfs
* linux-log-parser
* ltp-cap_bounds-tests
* ltp-commands-tests
* ltp-containers-tests
* ltp-controllers-tests
* ltp-cpuhotplug-tests
* ltp-crypto-tests
* ltp-cve-tests
* ltp-dio-tests
* ltp-fcntl-locktests-tests
* ltp-filecaps-tests
* ltp-fs-tests
* ltp-fs_bind-tests
* ltp-fs_perms_simple-tests
* ltp-fsx-tests
* ltp-hugetlb-tests
* ltp-io-tests
* ltp-ipc-tests
* ltp-math-tests
* ltp-mm-tests
* ltp-nptl-tests
* ltp-open-posix-tests
* ltp-pty-tests
* ltp-sched-tests
* ltp-securebits-tests
* ltp-syscalls-tests
* ltp-tracing-tests
* network-basic-tests
* packetdrill
* perf
* rcutorture
* ssuite
* v4l2-compliance
--
Linaro LKFT
https://lkft.linaro.org
Hi!
> This is the start of the stable review cycle for the 5.10.46 release.
> There are 146 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
CIP testing did not find any problems here:
https://gitlab.com/cip-project/cip-testing/linux-stable-rc-ci/-/tree/linux-5.10.y
Tested-by: Pavel Machek (CIP) <[email protected]>
Best regards,
Pavel
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
On Mon, Jun 21, 2021 at 06:57:58PM +0200, Peter Zijlstra wrote:
> On Mon, Jun 21, 2021 at 06:15:25PM +0200, Greg Kroah-Hartman wrote:
> > From: Odin Ugedal <[email protected]>
> >
> > [ Upstream commit a7b359fc6a37faaf472125867c8dc5a068c90982 ]
> >
> > Fix an issue where fairness is decreased since cfs_rq's can end up not
> > being decayed properly. For two sibling control groups with the same
> > priority, this can often lead to a load ratio of 99/1 (!!).
> >
> > This happens because when a cfs_rq is throttled, all the descendant
> > cfs_rq's will be removed from the leaf list. When they initial cfs_rq
> > is unthrottled, it will currently only re add descendant cfs_rq's if
> > they have one or more entities enqueued. This is not a perfect
> > heuristic.
> >
> > Instead, we insert all cfs_rq's that contain one or more enqueued
> > entities, or it its load is not completely decayed.
> >
> > Can often lead to situations like this for equally weighted control
> > groups:
> >
> > $ ps u -C stress
> > USER PID %CPU %MEM VSZ RSS TTY STAT START TIME COMMAND
> > root 10009 88.8 0.0 3676 100 pts/1 R+ 11:04 0:13 stress --cpu 1
> > root 10023 3.0 0.0 3676 104 pts/1 R+ 11:04 0:00 stress --cpu 1
> >
> > Fixes: 31bc6aeaab1d ("sched/fair: Optimize update_blocked_averages()")
> > [vingo: !SMP build fix]
> > Signed-off-by: Odin Ugedal <[email protected]>
> > Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
> > Reviewed-by: Vincent Guittot <[email protected]>
> > Link: https://lore.kernel.org/r/[email protected]
> > Signed-off-by: Sasha Levin <[email protected]>
>
> This one is currently known to cause some LTP fail, fixes are being
> discussed, please hold off for now.
Now dropped from all queues, thanks.
greg k-h
Hi Greg,
On Mon, Jun 21, 2021 at 06:13:50PM +0200, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.10.46 release.
> There are 146 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed, 23 Jun 2021 15:48:46 +0000.
> Anything received after that time might be too late.
Build test:
mips (gcc version 11.1.1 20210615): 63 configs -> no failure
arm (gcc version 11.1.1 20210615): 105 configs -> no new failure
arm64 (gcc version 11.1.1 20210615): 2 configs -> no failure
x86_64 (gcc version 10.2.1 20210110): 2 configs -> no failure
Boot test:
x86_64: Booted on my test laptop. No regression.
x86_64: Booted on qemu. No regression.
arm64: Booted on rpi4b (4GB model). No regression.
Tested-by: Sudip Mukherjee <[email protected]>
--
Regards
Sudip
On Mon, Jun 21, 2021 at 06:13:50PM +0200, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.10.46 release.
> There are 146 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed, 23 Jun 2021 15:48:46 +0000.
> Anything received after that time might be too late.
>
Build results:
total: 156 pass: 156 fail: 0
Qemu test results:
total: 455 pass: 455 fail: 0
Tested-by: Guenter Roeck <[email protected]>
Guenter
On 6/21/21 10:13 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.10.46 release.
> There are 146 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed, 23 Jun 2021 15:48:46 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.10.46-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.10.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
>
Compiled and booted on my test system. No dmesg regressions.
Tested-by: Shuah Khan <[email protected]>
thanks,
-- Shuah
On 2021/6/22 0:13, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.10.46 release.
> There are 146 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed, 23 Jun 2021 15:48:46 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.10.46-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.10.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
>
Tested on arm64 and x86 for 5.10.46-rc1,
Kernel repo:
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
Branch: linux-5.10.y
Version: 5.10.46-rc1
Commit: c00b84692b513471386cc0db08f8ac9020f88659
Compiler: gcc version 7.3.0 (GCC)
arm64:
--------------------------------------------------------------------
Testcase Result Summary:
total: 8906
passed: 8906
failed: 0
timeout: 0
--------------------------------------------------------------------
x86:
--------------------------------------------------------------------
Testcase Result Summary:
total: 8906
passed: 8906
failed: 0
timeout: 0
--------------------------------------------------------------------
Tested-by: Hulk Robot <[email protected]>
On Mon, Jun 21, 2021 at 06:13:50PM +0200, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.10.46 release.
> There are 146 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed, 23 Jun 2021 15:48:46 +0000.
> Anything received after that time might be too late.
Tested ok on:
- Tanix TX6 arm64 (Allwinner H6)
Tested-by: Rudi Heitbaum <[email protected]>
--
Rudi
Hi!
> From: Paolo Abeni <[email protected]>
>
> [ Upstream commit 61e710227e97172355d5f150d5c78c64175d9fb2 ]
>
> warn_bad_map() produces a kernel WARN on bad input coming
> from the network. Use pr_debug() to avoid spamming the system
> log.
So... we switched from WARN _ONCE_ to pr_debug, as many times as we
detect the problem.
Should this be pr_debug_once?
Best regards,
Pavel
> +++ b/net/mptcp/subflow.c
> @@ -655,10 +655,10 @@ static u64 expand_seq(u64 old_seq, u16 old_data_len, u64 seq)
> return seq | ((old_seq + old_data_len + 1) & GENMASK_ULL(63, 32));
> }
>
> -static void warn_bad_map(struct mptcp_subflow_context *subflow, u32 ssn)
> +static void dbg_bad_map(struct mptcp_subflow_context *subflow, u32 ssn)
> {
> - WARN_ONCE(1, "Bad mapping: ssn=%d map_seq=%d map_data_len=%d",
> - ssn, subflow->map_subflow_seq, subflow->map_data_len);
> + pr_debug("Bad mapping: ssn=%d map_seq=%d map_data_len=%d",
> + ssn, subflow->map_subflow_seq, subflow->map_data_len);
> }
>
> static bool skb_is_fully_mapped(struct sock *ssk, struct sk_buff *skb)
Best regards,
Pavel
--
http://www.livejournal.com/~pavelmachek
Hi!
>
> There is a panic in socket ioctl cmd SIOCGSKNS when NET_NS is not enabled.
> The reason is that nsfs tries to access ns->ops but the proc_ns_operations
> is not implemented in this case.
>
> [7.670023] Unable to handle kernel NULL pointer dereference at virtual address 00000010
> [7.670268] pgd = 32b54000
> [7.670544] [00000010] *pgd=00000000
> [7.671861] Internal error: Oops: 5 [#1] SMP ARM
> [7.672315] Modules linked in:
> [7.672918] CPU: 0 PID: 1 Comm: systemd Not tainted 5.13.0-rc3-00375-g6799d4f2da49 #16
> [7.673309] Hardware name: Generic DT based system
> [7.673642] PC is at nsfs_evict+0x24/0x30
> [7.674486] LR is at clear_inode+0x20/0x9c
>
> The same to tun SIOCGSKNS command.
>
> To fix this problem, we make get_net_ns() return -EINVAL when NET_NS is
> disabled. Meanwhile move it to right place net/core/net_namespace.c.
-EINVAL sounds like wrong error code for valid operation kernel was
configured to do. -ENOTSUPP?
Best regards,
Pavel
--
http://www.livejournal.com/~pavelmachek
Hello,
On Wed, 2021-06-23 at 16:22 +0200, Pavel Machek wrote:
> Hi!
>
> > From: Paolo Abeni <[email protected]>
> >
> > [ Upstream commit 61e710227e97172355d5f150d5c78c64175d9fb2 ]
> >
> > warn_bad_map() produces a kernel WARN on bad input coming
> > from the network. Use pr_debug() to avoid spamming the system
> > log.
>
> So... we switched from WARN _ONCE_ to pr_debug, as many times as we
> detect the problem.
>
> Should this be pr_debug_once?
Thank you for double checking this!
In the MPTCP code, we use pr_debug() statements as a debug tool, e.g.
when enabled, it could print per-packet info with no restriction.
There are (a few) similar use in the plain TCP code.
pr_debug() is not supposed to be enabled on any production system,
while the WARN_ONCE could trigger automated tools for irrelevant
network noise.
I thing pr_debug() is fine here.
Cheers,
Paolo
On Wed, 23 Jun 2021, Paolo Abeni wrote:
> Hello,
>
> On Wed, 2021-06-23 at 16:22 +0200, Pavel Machek wrote:
>> Hi!
>>
>>> From: Paolo Abeni <[email protected]>
>>>
>>> [ Upstream commit 61e710227e97172355d5f150d5c78c64175d9fb2 ]
>>>
>>> warn_bad_map() produces a kernel WARN on bad input coming
>>> from the network. Use pr_debug() to avoid spamming the system
>>> log.
>>
>> So... we switched from WARN _ONCE_ to pr_debug, as many times as we
>> detect the problem.
>>
>> Should this be pr_debug_once?
>
> Thank you for double checking this!
>
> In the MPTCP code, we use pr_debug() statements as a debug tool, e.g.
> when enabled, it could print per-packet info with no restriction.
>
> There are (a few) similar use in the plain TCP code.
>
> pr_debug() is not supposed to be enabled on any production system,
> while the WARN_ONCE could trigger automated tools for irrelevant
> network noise.
>
> I thing pr_debug() is fine here.
>
Hi Pavel -
I agree with Paolo. This is not a frequently encountered condition, even
when turning on this specific pr_debug(). I'd say the previous use of the
_ONCE() variant was mostly because the effects were not optional (not
because of frequency).
For protocol development, pr_debug() is both off by default and more
useful when it _is_ enabled. I'd prefer to keep this patch as-is.
Thanks,
--
Mat Martineau
Intel
Hi!
> > > From: Paolo Abeni <[email protected]>
> > >
> > > [ Upstream commit 61e710227e97172355d5f150d5c78c64175d9fb2 ]
> > >
> > > warn_bad_map() produces a kernel WARN on bad input coming
> > > from the network. Use pr_debug() to avoid spamming the system
> > > log.
> >
> > So... we switched from WARN _ONCE_ to pr_debug, as many times as we
> > detect the problem.
> >
> > Should this be pr_debug_once?
>
> Thank you for double checking this!
>
> In the MPTCP code, we use pr_debug() statements as a debug tool, e.g.
> when enabled, it could print per-packet info with no restriction.
>
> There are (a few) similar use in the plain TCP code.
>
> pr_debug() is not supposed to be enabled on any production system,
> while the WARN_ONCE could trigger automated tools for irrelevant
> network noise.
Correct me if I'm wrong, but I believe pr_debug will result in
messages being stored in the dmesg buffer, even on production
systems.
Best regards,
Pavel
--
http://www.livejournal.com/~pavelmachek
On Wed, 2021-06-23 at 18:53 +0200, Pavel Machek wrote:
> Hi!
>
> > > > From: Paolo Abeni <[email protected]>
> > > >
> > > > [ Upstream commit 61e710227e97172355d5f150d5c78c64175d9fb2 ]
> > > >
> > > > warn_bad_map() produces a kernel WARN on bad input coming
> > > > from the network. Use pr_debug() to avoid spamming the system
> > > > log.
> > >
> > > So... we switched from WARN _ONCE_ to pr_debug, as many times as we
> > > detect the problem.
> > >
> > > Should this be pr_debug_once?
> >
> > Thank you for double checking this!
> >
> > In the MPTCP code, we use pr_debug() statements as a debug tool, e.g.
> > when enabled, it could print per-packet info with no restriction.
> >
> > There are (a few) similar use in the plain TCP code.
> >
> > pr_debug() is not supposed to be enabled on any production system,
> > while the WARN_ONCE could trigger automated tools for irrelevant
> > network noise.
>
> Correct me if I'm wrong, but I believe pr_debug will result in
> messages being stored in the dmesg buffer, even on production
> systems.
If DYNAMIC_DEBUG is enabled, and the system administator explicitly
enables the relevant debug message writing suitable data in
/sys/kernel/debug/dynamic_debug/control, yes, the message will be
printed on dmsg.
With DYNAMIC_DEBUG disabled, patching the kernel and defining the DEBUG
macro in the net/mptcp/protocol.c file you will get again the debug
message.
Neither of the above fit productions systems IMHO, and I'm not aware of
other options to trigger the relevant debug message.
I personally have CONFIG_DYNAMIC_DEBUG=y in my kconfig and I enable the
relevant debug message as needed in my devel activity.
Cheers,
Paolo
On Wed, Jun 23, 2021 at 04:26:35PM +0200, Pavel Machek wrote:
> Hi!
> >
> > There is a panic in socket ioctl cmd SIOCGSKNS when NET_NS is not enabled.
> > The reason is that nsfs tries to access ns->ops but the proc_ns_operations
> > is not implemented in this case.
> >
> > [7.670023] Unable to handle kernel NULL pointer dereference at virtual address 00000010
> > [7.670268] pgd = 32b54000
> > [7.670544] [00000010] *pgd=00000000
> > [7.671861] Internal error: Oops: 5 [#1] SMP ARM
> > [7.672315] Modules linked in:
> > [7.672918] CPU: 0 PID: 1 Comm: systemd Not tainted 5.13.0-rc3-00375-g6799d4f2da49 #16
> > [7.673309] Hardware name: Generic DT based system
> > [7.673642] PC is at nsfs_evict+0x24/0x30
> > [7.674486] LR is at clear_inode+0x20/0x9c
> >
> > The same to tun SIOCGSKNS command.
> >
> > To fix this problem, we make get_net_ns() return -EINVAL when NET_NS is
> > disabled. Meanwhile move it to right place net/core/net_namespace.c.
>
> -EINVAL sounds like wrong error code for valid operation kernel was
> configured to do. -ENOTSUPP?
>
This is to align with the existing code which returns -EINVAL.
For the issue we fixed, yes, -EOPNOTSUPP (not -ENOTSUPP) should be better.
> Best regards,
> Pavel
>
> --
> http://www.livejournal.com/~pavelmachek
--
Cheers,
Changbin Du